WorldWideScience

Sample records for earth metal ions

  1. Solution thermodynamics of rare-earth metal ions - physicochemical study-

    Energy Technology Data Exchange (ETDEWEB)

    Amerkhanova, Sh K; Shlyapov, R M; Uali, A S [Buketov Karaganda state university, University str., 28, Karaganda, 100028 (Kazakhstan)], E-mail: amerkhanova_sh@mail.ru

    2009-02-01

    The results of the studying of interactions in multicomponent systems 'polyvinyl alcohol (PVA) - rare-earth element ion - nitrate of sodium - water' are represented. It is established that for rubidium (I) ions temperature and ionic strength is render destroying action, and for yttrium (III) ions the influence of these factors has return character which is connected with features of an electronic structure of metal ion. It is revealed that a dominating role of non-electrostatic formation composed, hence, the formation of donor-acceptor connection of 'metal - ligand' occurs through atom of oxygen.

  2. Adsorption of rare earth metal ion by algae. Sorui ni yoru kidorui ion no kyuchaku

    Energy Technology Data Exchange (ETDEWEB)

    Kuwabara, T.; Yazawa, A. (Miyagi National College of Technology, Miyagi (Japan))

    1994-02-25

    This paper reports the result of investigations on adsorption of rare earth metal ion by using algae, and adsorption of different metal ions by using egg white and soy bean protein. Rare earth metal ion is adsorbed at a considerably high rate with alga powder of different kinds. The adsorption has been judged to be cation exchange reactive adsorption, while with use of spirulina and chlorella a maximum value of adsorption rate has been observed at pH from 3 to 4.5. Therefore, selective adsorption and separation of metal ions other than rare earth metal ion has become possible. When the blue pigment extracted from spirulina, the spirulina blue, is used, the rare earth metal ion had its selective adsorption and separation performance improved higher than using spirulina itself at pH from 3 to 4.5. As a result of adsorption experiment using egg white and soy bean protein, it has been found that the metal ion adsorption behavior of the spirulina blue depends on coagulative action of protein structure to some extent. However, the sharp selective adsorption performance on rare earth metal ion due to particular pH strength has been found because of actions unique to the pigment structure of phycocyanin, a major component in the spirulina blue. 7 refs., 19 figs.

  3. Luminescence enhancement of rare earth ions by metal nanostructures

    Institute of Scientific and Technical Information of China (English)

    G.A.Denisenko

    2009-01-01

    Well-ordered metal structures,i.e.arrays of nanosized tips on silver surface for studies of the luminescence enhancement of absorbed media with rare earth ions were used.These arrays were prepared by the metal evaporation on track membranes.Calculations of resonance frequencies of tips regarded as semispheroids were done taking into account the interaction between dipoles of tips.They were used to discuss experimental results for media with Eu(NO3)3·6H2O salt basing on data for bulk silver dielectric function.

  4. Controlled charge exchange between alkaline earth metals and their ions

    Science.gov (United States)

    Gacesa, Marko; Côté, Robin

    2015-05-01

    We theoretically investigate the prospects of realizing controlled charge exchange via magnetic Feshbach resonances in cold and ultracold collisions of atoms and ions. In particular, we focus on near-resonant charge exchange in heteroisotopic combinations of alkaline earth metals, such as 9Be++10 Be9 Be+10Be+ , which exhibit favorable electronic and hyperfine structure. The quantum scattering calculations are performed for a range of initial states and experimentally attainable magnetic fields in standard coupled-channel Feshbach projection formalism, where higher-order corrections such as the mass-polarization term are explicitely included. In addition, we predict a number of magnetic Feshbach resonances for different heteronuclear isotopic combinations of the listed and related alkaline earth elements. Our results imply that near-resonant charge-exchange could be used to realize atom-ion quantum gates, as well as controlled charge transfer in optically trapped cold quantum gases. This work is partially supported by ARO.

  5. THE TRANSFER OF ALKALINE EARTH-METAL ION AT W/NB INTERFACE FACILITATED BY JOSAMYCIN

    Institute of Scientific and Technical Information of China (English)

    范瑞溪; 狄俊伟

    1991-01-01

    This paper describes the invesligation of the transfer behaviour of the alkaline earth-metal cations across the water/nitrobenzene interface facilitated by josamycin in the nitrobenzene phase using semi-differential cyclic voltammetry .The peak height is directly proportional to the concentration of josaycin (nb) and to the potential scan rate.The complexes formed from alkaline earth-metal ions and josamycin at the w/nb interface are ML22+ ion.

  6. On the single-ion Magnetic Anisotropy of the Rare-Earth Metals

    DEFF Research Database (Denmark)

    Kolmakova, N.P.; Tishin, A.M.; Bohr, Jakob

    1996-01-01

    The temperature dependences of the single-ion magnetic anisotropy constants for Tb and Dy metals are calculated in terms of the multipole moments of the rare-earth ions utilizing the available crystal-field parameters. The results are compared with the existing experimental data....

  7. No Giant Two-Ion Anisotropy in the Heavy-Rare-Earth Metals

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker

    1976-01-01

    A new Bose-operator expansion of tensor operators is applied to the heavy-rare-earth metals. The Er data for the cone phase have been analyzed successfully with single-ion anisotropy and isotropic exchange interaction. The Tb data can be understood on the same basis. The previously found large two......-ion anisotropy was due to an inadequate treatment of the large single-ion anisotropy leading to an incorrect expression for the spin-wave energy....

  8. PERVAPORATION SEPARATION OF WATER-ACETIC ACID MIXTURES THROUGH AN-co-AA MEMBRANES TREATED WITH RARE EARTH METAL IONS

    Institute of Scientific and Technical Information of China (English)

    SHEN Zhiquan; ZHANG Fuyao; ZHANG Yifeng

    1995-01-01

    Pervaporation separation of water-acetic acid mixtures through Poly (AN-co-AA)membranes and rare earth metal ions treated Poly(AN-co-AA)membranes was investigated for the first time. The results showed that the treatment with rare earth metal ions could greatly improve the characteristics of the separation of water-acetic acid mixtures.

  9. Enhanced Laser Cooling of Rare-Earth-Ion-Doped Glass Containing Nanometer-Sized Metallic Particles

    Institute of Scientific and Technical Information of China (English)

    JIA You-Hun; ZHONG Biao; YIN Jian-Ping

    2009-01-01

    The enhanced laser cooling performance of rare-earth-ions-doped glasses containing small particles is predicted. This is achieved by the enhancement of local field around rare earth ions, owing to the surface plasmon resonance of small metallic particles. The role of energy transfer between ions and the particle is theoretical discussed. Depending on the particle size and the ion emission quantum efficiency, the enhancement of the absorption and the fluorescence is predicted. Moreover, taking Yb3+-doped ZBLAN as example, the cooling power and heat-light converting efficiency are calculated. It is finally concluded that the absorption and the fluorescence are greatly enhanced in these composite materials, the cooling power is increased compared to the bulk material.

  10. Catalysis by alkali and alkaline-earth metal ions in nucleophilic attack of methoxide ion on crown ethers bearing an intra-annular acetoxy group

    NARCIS (Netherlands)

    Cacciapaglia, Roberta; Lucente, Silvia; Mandolini, Luigi; Doorn, van Arie R.; Reinhoudt, David N.; Verboom, Willem

    1989-01-01

    Rates of reaction of methoxide ion with crown ethers bearing an intra-annular acetoxy group are markedly enhanced by alkali and alkaline-earth metal bromides as a result of much stronger interactions of the metal ions with transition states than with reactants. Rates of reactions of methoxide ion w

  11. Bond-length distributions for ions bonded to oxygen: alkali and alkaline-earth metals.

    Science.gov (United States)

    Gagné, Olivier Charles; Hawthorne, Frank Christopher

    2016-08-01

    Bond-length distributions have been examined for 55 configurations of alkali-metal ions and 29 configurations of alkaline-earth-metal ions bonded to oxygen, for 4859 coordination polyhedra and 38 594 bond distances (alkali metals), and for 3038 coordination polyhedra and 24 487 bond distances (alkaline-earth metals). Bond lengths generally show a positively skewed Gaussian distribution that originates from the variation in Born repulsion and Coulomb attraction as a function of interatomic distance. The skewness and kurtosis of these distributions generally decrease with increasing coordination number of the central cation, a result of decreasing Born repulsion with increasing coordination number. We confirm the following minimum coordination numbers: ([3])Li(+), ([3])Na(+), ([4])K(+), ([4])Rb(+), ([6])Cs(+), ([3])Be(2+), ([4])Mg(2+), ([6])Ca(2+), ([6])Sr(2+) and ([6])Ba(2+), but note that some reported examples are the result of extensive dynamic and/or positional short-range disorder and are not ordered arrangements. Some distributions of bond lengths are distinctly multi-modal. This is commonly due to the occurrence of large numbers of structure refinements of a particular structure type in which a particular cation is always present, leading to an over-representation of a specific range of bond lengths. Outliers in the distributions of mean bond lengths are often associated with anomalous values of atomic displacement of the constituent cations and/or anions. For a sample of ([6])Na(+), the ratio Ueq(Na)/Ueq(bonded anions) is partially correlated with 〈([6])Na(+)-O(2-)〉 (R(2) = 0.57), suggesting that the mean bond length is correlated with vibrational/displacement characteristics of the constituent ions for a fixed coordination number. Mean bond lengths also show a weak correlation with bond-length distortion from the mean value in general, although some coordination numbers show the widest variation in mean bond length for zero distortion, e.g. Li(+) in

  12. Sol-gel-derived hybrid materials multi-doped with rare-earth metal ions

    Science.gov (United States)

    Zelazowska, E.; Rysiakiewicz-Pasek, E.; Borczuch-Laczka, M.; Cholewa-Kowalska, K.

    2012-06-01

    Four different hybrid organic-inorganic materials based on TiO2-SiO2 matrices with organic additives and doped with rare-earth metal ions (III) from the group of europium, cerium, terbium, neodymium, dysprosium and samarium, were synthesized by sol-gel method. Tetraethyl orthosilicate, titanium (IV) isopropoxide and organic compounds, such as butyl acrylate, butyl methacrylate, ethyl acetoacetate, ethylene glycol dimethacrylate, ethyl acetate, propylene carbonate, organic solvents and certain inorganic salts were used in the synthesis. The inorganic part of the sols, which were used in the synthesis of all the hybrid materials, was prepared separately and then the organic parts were added. The materials obtained were aged for three weeks at room temperature and then heated in an electric oven for three hours at temperatures of 80 °C-150 °C. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDX); X-ray diffraction (XRD); Fourier transform infrared spectroscopy (KBr technique); 29Si magic-angle spinning nuclear magnetic resonance; and fluorescence spectroscopy were used for the examination of morphology, microstructure and luminescence properties, respectively. Photoluminescence properties with relatively intense narrow emission lines of Tb, Eu, Dy, Nd, Sm respectively to the RE-ions doping, were observed for all the hybrid materials.

  13. Difference of coordination between alkali- and alkaline-earth-metal ions to a symmetrical α,α',δ,δ'-tetramethylcucurbit[6]uril.

    Science.gov (United States)

    Chen, Wen-Jian; Yu, Da-Hai; Xiao, Xin; Zhang, Yun-Qian; Zhu, Qian-Jiang; Xue, Sai-Feng; Tao, Zhu; Wei, Gang

    2011-08-01

    To explore differences in coordination between alkali- and alkaline-earth-metal ions and cucurbit[n]urils, a water-soluble α,α',δ,δ'-tetramethylcucurbit[6]uril (TMeQ[6]) was used to synthesize a series of complexes and their supramolecular assemblies, based on the coordination of TMeQ[6] with alkali- and alkaline-earth-metal ions. The complexes and corresponding supramolecular assemblies were structurally characterized by single-crystal X-ray diffraction. Unlike cucurbituril (Q[6]), which formed the metal-Q[6] polymers based on the direct coordination of carbonyl oxygen atoms to the alkali-metal ions, TMeQ[6] formed metal-TMeQ[6] polymers based on the direct coordination of carbonyl oxygen atoms with the alkaline-earth-metal ions rather than the alkali-metal ions.

  14. sup 29 Si magic angle spinning NMR spectra of alkali metal, alkaline earth metal, and rare earth metal ion exchanged Y zeolites

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Kueijung; Chern, Jeryoung (Tsinghua Univ., Taiwan (China))

    1989-02-23

    The variation of the extraframework cation location in groups IA and IIA metals and rare earth metal (RE) Y zeolites as a function of the dehydration and the rehydration is monitored by {sup 29}Si MAS NMR. Unheated hydrated zeolites give similar {sup 29}Si spectra as they present the similar cation distributions. Upon dehydration a high-field shift is observed which correlates with the distortion of bond angles in silicon-oxygen tetrahedra. The line shapes of {sup 29}Si spectra depend on the nature and the location of the exchangeable cations and the occupancy of the different sites in dehydrated and rehydrated states. The correlation between the line shape of {sup 29}Si spectra and the migration of cations from the supercages to the sodalite cages after heating treatment was studied. The results of {sup 29}Si NMR agree with the known structure data.

  15. Rare-earth neutral metal injection into an electron beam ion trap plasma

    Energy Technology Data Exchange (ETDEWEB)

    Magee, E. W., E-mail: magee1@llnl.gov; Beiersdorfer, P.; Brown, G. V. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Hell, N. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Dr. Remeis-Sternwarte and ECAP, Universität Erlangen-Nürnberg, 96049 Bamberg (Germany)

    2014-11-15

    We have designed and implemented a neutral metal vapor injector on the SuperEBIT high-energy electron beam ion trap at the Lawrence Livermore National Laboratory. A horizontally directed vapor of a europium metal is created using a thermal evaporation technique. The metal vapor is then spatially collimated prior to injection into the trap. The source's form and quantity constraints are significantly reduced making plasmas out of metal with vapor pressures ≤10{sup −7} Torr at ≥1000 °C more obtainable. A long pulsed or constant feed metal vapor injection method adds new flexibility by varying the timing of injection and rate of material being introduced into the trap.

  16. Long-range interactions between the alkali-metal atoms and alkaline earth ions

    CERN Document Server

    Kaur, Jasmeet; Arora, Bindiya; Sahoo, B K

    2014-01-01

    Accurate knowledge of interaction potentials among the alkali atoms and alkaline earth ions is very useful in the studies of cold atom physics. Here we carry out theoretical studies of the long-range interactions among the Li, Na, K, and Rb alkali atoms with the Ca$^+$, Ba$^+$, Sr$^+$, and Ra$^+$ alkaline earth ions systematically which are largely motivated by their importance in a number of applications. These interactions are expressed as a power series in the inverse of the internuclear separation $R$. Both the dispersion and induction components of these interactions are determined accurately from the algebraic coefficients corresponding to each power combination in the series. Ultimately, these coefficients are expressed in terms of the electric multipole polarizabilities of the above mentioned systems which are calculated using the matrix elements obtained from a relativistic coupled-cluster method and core contributions to these quantities from the random phase approximation. We also compare our estim...

  17. [Development of metal ions analysis by ion chromatography].

    Science.gov (United States)

    Yu, Hong; Wang, Yuxin

    2007-05-01

    Analysis of metal ions by ion chromatography, including cation-exchange ion chromatography, anion-exchange ion chromatography and chelation ion chromatography, is reviewed. The cation-exchange ion chromatography is a main method for the determination of metal ions. Stationary phases in cation-exchange ion chromatography are strong acid cation exchanger (sulfonic) and weak acid cation exchanger (carboxylic). Alkali metal ions, alkaline earth metal ions, transition metal ions, rare earth metal ions, ammonium ions and amines can be analyzed by cation-exchange ion chromatography with a suitable detector. The anion-exchange ion chromatography is suitable for the separation and analysis of alkaline earth metal ions, transition metal ions and rare earth metal ions. The selectivity for analysis of metal ions with anion-exchange ion chromatography is good. Simultaneous determination of metal ions and inorganic anions can be achieved using anion-exchange ion chromatography. Chelation ion chromatography is suitable for the determination of trace metal ions in complex matrices. A total of 125 references are cited.

  18. Up-conversion processes of rare earth ions in heavy metal glasses

    Institute of Scientific and Technical Information of China (English)

    L. Grobelny; W A. Pisarski; J. Pisarska; R. Lisiecki; W. Ryba-Romanowski

    2011-01-01

    Heavy metal lead germanate glasses doubly doped with Yb3+ and Ln3+ ions (Ln=Er,Tm) were investigated.Up-conversion spectra of Er3+ and Tm3+ were registered under diode-laser excitation of Yb3+.Up-conversion luminescence bands corresponded to 4S3/2→4I15/2 (green)and 4F9/2→4I15/2 (red) transitions of Er3+ as well as 1G4→3H6 (blue) and 3H4→3H6 (NIR) transitions of Tm3+,respectively.

  19. Spin-orbit qubits of rare-earth-metal ions in axially symmetric crystal fields.

    Science.gov (United States)

    Bertaina, S; Shim, J H; Gambarelli, S; Malkin, B Z; Barbara, B

    2009-11-27

    Contrary to the well-known spin qubits, rare-earth-metal qubits are characterized by a strong influence of crystal field due to large spin-orbit coupling. At low temperature and in the presence of resonance microwaves, it is the magnetic moment of the crystal-field ground state which nutates (for several micros) and the Rabi frequency Omega(R) is anisotropic. Here, we present a study of the variations of Omega(R)(H(0)) with the magnitude and direction of the static magnetic field H(0) for the odd 167Er isotope in a single crystal CaWO(4):Er(3+). The hyperfine interactions split the Omega(R)(H(0)) curve into eight different curves which are fitted numerically and described analytically. These "spin-orbit qubits" should allow detailed studies of decoherence mechanisms which become relevant at high temperature and open new ways for qubit addressing using properly oriented magnetic fields.

  20. Visible-Light Excitated Photocatalytic Activity of Rare Earth Metal-Ion-Doped Titania

    Institute of Scientific and Technical Information of China (English)

    谢一兵; 李萍; 袁春伟

    2002-01-01

    The rare earth ion Ce4+ doped TiO2 was prepared by sol-gel method. The average particle sizes are about 10 nm for sol phase and 55 nm for polycrystalline phase. The photocatalytic activities to degrade Reactive Brilliant Red Dye X-3B were investigated. The result reveals that the spectrum response of Ce4+-TiO2 has extended to visible region from the UV region(λ<387 nm) of pure TiO2. Amorphous phase Ce4+-TiO2 sol with an electron scavenger (1.0% atom fraction Ce4+ ion doping amount) shows the capability of the photocatalytic degradation of the dye X-3B as well as the nanocrystallite Ce4+-TiO2 with an interband trap site. Despite of the difference in the morphology of Ce4+-TiO2 photocatalyst, there is no apparent difference in respect of the decoloring effects. Whereas, polycrystalline phase Ce4+-TiO2 exhibits strong photomineralization power in comparison with the amorphous phase. The photocatalytic oxidation mechanisms of the dye molecule mainly involved in the self-photo-sensitization photolysis process by the first excited singlet oxygen (1O2) and photocatalysis process by hydroxyl radicals(*OH) under visible light irradiation.

  1. A preorganized metalloreceptor for alkaline earth ions showing calcium versus magnesium selectivity in water: biological activity of selected metal complexes.

    Science.gov (United States)

    Amatori, Stefano; Ambrosi, Gianluca; Fanelli, Mirco; Formica, Mauro; Fusi, Vieri; Giorgi, Luca; Macedi, Eleonora; Micheloni, Mauro; Paoli, Paola; Rossi, Patrizia

    2014-08-25

    The N,N'-bis[(3-hydroxy-4-pyron-2-yl)methyl]-N,N'-dimethylethylendiamine (Malten = L) forms the highly stable [CuH(-2)L] species in water, in which the converging maltol oxygen atoms form an electron-rich area able to host hard metal ions. When considering the alkaline earth series (AE), the [Cu(H(-2)L)] species binds all metal ions, with the exception of Mg(2+), exhibiting the relevant property to discriminate Ca(2+) versus Mg(2+) at physiological pH 7.4; the binding of the AE metal is visible to the naked eye. The stability constant values of the trinuclear [AE{Cu(H(-2)L)}2](2+) species formed reach the maximum for Ca(2+) (log K=7.7). Ca(2+) also forms a tetranuclear [Ca{Cu(H(-2)L)}]2(4+) species at a high Ca(2+) concentration. Tri- and tetranuclear calcium complexes show blue- and pink-colored crystals, respectively. [Cu(H(-2)L)] is the most active species in inducing DNA alterations. The DNA damages are compatible with its hydrolytic cleavages.

  2. Synthesis and structure of some nano-sized rare-earth metal ions doped potassium hexacyanoferrates

    Science.gov (United States)

    Narayan, Himanshu; Alemu, Hailemichael; Nketsa, Pusetso F.; Manatha, Toka J.; Madhavi Thakurdesai, And

    2015-05-01

    Rare-earth ions doped potassium hexacyanoferrates (KR-HCF); with the general formula KRFe(CN)6 · 3H2 O [with, R≡Y, Gd and Yb] nanoparticles were synthesized through precipitation. Characterization was done through particle-size analyzer, scanning electron microscopy (SEM), Fourier Transform infra-red (FTIR) and Raman spectroscopy, and powder X-ray diffraction (XRD). The XRD data was analyzed on FullProf Software Suite program and the unit-cell structure and lattice parameters of KR-HCF samples were determined from scratch and refined further. All the three KR-HCF nanoparticles seem to crystallize in the orthorhombic primitive PMMM space-group. Reasonably good agreement was found with the previously reported lattice constants of KGd-HCF and KYb-HCF orthorhombic single-crystals, except that they assume different space-groups. The observed dissimilarity of space-groups may be attributed to the different time scales involved in the synthesis process. Moreover, the crystal structure of KYFe(CN)6 · 3H2 O nanoparticles is being reported for the very first time.

  3. Alkaline earth metal thioindates

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov-Ehmin, B.N.; Ivlieva, V.I.; Filatenko, L.A.; Zajtsev, B.E.; Kaziev, G.Z.; Sarabiya, M.G.

    1984-08-01

    Alkaline earth metal thioindates of MIn/sub 2/S/sub 4/ composition were synthesized by interaction of alkaline earth metal oxoindates with hydrogen sulfide during heating. Investigation into the compounds by X-ray analysis showed that calcium compound crystallizes in cubic crystal system and strontium and barium compounds in rhombic crystal system. Lattice parameters and the number of formula units were determined. Thioindates of M/sub 3/In/sub 2/S/sub 6/ composition were synthesized, their individuality was shown.

  4. 1H and 23Na MAS NMR spectroscopy of cationic species in CO2 selective alkaline earth metal porous silicoaluminophosphates prepared via liquid and solid state ion exchange

    Science.gov (United States)

    Arévalo-Hidalgo, Ana G.; Dugar, Sneha; Fu, Riqiang; Hernández-Maldonado, Arturo J.

    2012-07-01

    The location of extraframework cations in Sr2+ and Ba2+ ion-exchanged SAPO-34 was estimated by means of 1H and 23Na MAS NMR spectroscopy and spectral deconvolution. Incorporation of the alkaline earth metal cations onto the SAPO framework was achieved via liquid state ion exchange, coupled partial detemplation/solid-state ion exchange, and combination of both techniques. MAS NMR revealed that the level of ion exchange was limited by the presence of protons and sodium cations near hexagonal prisms (site SI), which are relatively difficult to exchange with the alkaline earth metal due to steric and charge repulsion criteria. In addition, the presence of ammonium cations in the supercages facilitated the exchange of otherwise tenacious hydrogen as corroborated by unit cell compositional data as well as enhanced CO2 adsorption at low partial pressures. The extraframework ammonium species were produced from partial detemplation of the structure-directing agent employed for the SAPO-34 synthesis, tetraethylammonium.

  5. Effects of alkaline earth metal ion complexation on amino acid zwitterion stability: Results from infrared action spectroscopy

    NARCIS (Netherlands)

    Bush, M. F.; Oomens, J.; Saykally, R. J.; Williams, E. R.

    2008-01-01

    The structures of isolated alkaline earth metal cationized amino acids are investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theory. These results indicate that arginine, glutamine, proline, serine, and valine all adopt zwitterionic structures when complexed with diva

  6. Microcalorimetric study on host-guest complexation of naphtho-15-crown-5 with four ions of alkaline earth metal

    Institute of Scientific and Technical Information of China (English)

    SONG Ming-zhi; ZHU Lan-ying; GAO Xi-ke; DOU Jian-min; SUN De-zhi

    2005-01-01

    Thermodynamic parameters of complexation of naphto- 15-crown-5 with four alkaline earth ions in aqueous media was determined using titration microcalorimetry at 298.15 K. The stability of the complexes, thermal effect and entropy effect of the complexation is discussed on the basis of the guest ions structure and the solvent effect. The stability constants tendency to vary with ion radius was interpreted. Complex of naphtha-15-crown-5 with calcium ion is very stable due to the synergism of static electric interaction and size selectivity between the host and the guest.

  7. CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES: Enhanced Laser Cooling of Rare-Earth-Ion-Doped Glass Containing Nanometer-Sized Metallic Particles

    Science.gov (United States)

    Jia, You-Hua; Zhong, Biao; Yin, Jian-Ping

    2009-03-01

    The enhanced laser cooling performance of rare-earth-ions-doped glasses containing small particles is predicted. This is achieved by the enhancement of local field around rare earth ions, owing to the surface plasmon resonance of small metallic particles. The role of energy transfer between ions and the particle is theoretical discussed. Depending on the particle size and the ion emission quantum efficiency, the enhancement of the absorption and the fluorescence is predicted. Moreover, taking Yb3+ -doped ZBLAN as example, the cooling power and heat-light converting efficiency are calculated. It is finally concluded that the absorption and the fluorescence are greatly enhanced in these composite materials, the cooling power is increased compared to the bulk material.

  8. Chelation ion chromatography of alkaline earth and transition metals a using monolithic silica column with bonded N-hydroxyethyliminodiacetic acid functional groups.

    Science.gov (United States)

    McGillicuddy, Nicola; Nesterenko, Ekaterina P; Nesterenko, Pavel N; Jones, Phil; Paull, Brett

    2013-02-08

    A commercially available porous silica monolithic column (Onyx Monolithic Si, 100 mm×4.6 mm I.D.) was 'in-column' covalently functionalised with 2-hydroxyethyliminodiacetic acid (HEIDA) groups, and applied to the simultaneous and rapid separation of alkaline earth and transition metal ions, using high-performance chelation ion chromatography (HPCIC). With a 0.3mM dipicolinic acid (DPA) containing eluent, the baseline separation of various common transition and heavy metal ions and the four alkaline earth metal ions could be achieved in under 14 min with a flow rate of just 0.8 mL/min. Detection was achieved using spectrophotometric detection at 540 nm after post-column reaction (PCR) with 4-(2-pyridylazo)-resorcinol (PAR). Significant effects from variation of eluent nature, concentration and temperature upon selectivity and retention were demonstrated with the new monolithic silica chelating phase. Under optimised conditions (0.165 M LiNO(3) eluent, pH 2.5), peak efficiencies of 54,000, 60,000 and 64,000 N/m, for Zn(2+), Mn(2+) and Cd(2+), respectively, were recorded, far exceeding that previously reported for IDA based chelation ion exchange columns.

  9. Structural diversity in binuclear complexes of alkaline earth metal ions with 4,6-diacetylresorcinol

    Science.gov (United States)

    Shebl, Magdy; Khalil, Saied M. E.; Taha, A.; Mahdi, M. A. N.

    2012-11-01

    A new series of binuclear and mixed-ligand complexes with the general formula: [M 2(LO)yClz]; where M = Mg(II), Ca(II), Sr(II) and Ba(II); H2L = 4,6-diacetylresorcinol, the secondary ligand L' = acetylacetone (acac), 8-hydroxyquinoline (8-HQ) or 2,2'-bipyridyl (Bipy), n = 0-2, m = 1, 2, x = 0, 1, 2, 4, y = 0, 2, 4, 5 and z = 0-2; have been synthesized. They have been characterized by the analytical and spectral methods (IR, 1H NMR and mass) as well as TGA and molar conductivity measurements. The spectroscopic and conductance data suggested that the H2L ligand behaves as a neutral, monobasic or dibasic tetradentate ligand, depending on the basicity of the secondary ligand, through the two phenolic and two carbonyl groups. Binuclear octahedral geometry has been assigned to all of the prepared complexes in various molar ratios 2:2; 2:2:2; 1:2:1 and 1:2:4 (L:M:L'). Molecular orbital calculations were performed for the ligands and their complexes using Hyperchem 7.52 program on the bases of PM3 level and the results were correlated with the experimental data. The ligand and some of its alkaline metal(II) complexes showed antibacterial activity towards some of Gram-positive and Gram-negative bacteria, yeast (Candida albicans) and fungus (Aspergillus fumigatus).

  10. Dark-state suppression and optimization of laser cooling and fluorescence in a trapped alkaline-earth-metal single ion

    CERN Document Server

    Lindvall, T; Tittonen, I; Madej, A A; 10.1103/PhysRevA.86.033403

    2012-01-01

    We study the formation and destabilization of dark states in a single trapped 88Sr+ ion caused by the cooling and repumping laser fields required for Doppler cooling and fluorescence detection of the ion. By numerically solving the time-dependent density matrix equations for the eight-level system consisting of the sublevels of the 5s 2S1/2, 5p 2P1/2, and 4d 2D3/2 states, we analyze the different types of dark states and how to prevent them in order to maximize the scattering rate, which is crucial for both the cooling and the detection of the ion. The influence of the laser linewidths and ion motion on the scattering rate and the dark resonances is studied. The calculations are then compared with experimental results obtained with an endcap ion trap system located at the National Research Council of Canada and found to be in good agreement. The results are applicable also to other alkaline earth ions and isotopes without hyperfine structure.

  11. Metal Ions in Unusual Valency States.

    Science.gov (United States)

    Sellers, Robin M.

    1981-01-01

    Discusses reactivity of metal ions with the primary products of water radiolysis, hyper-reduced metal ions, zero-valent metal ions, unstable divalent ions from the reduction of bivalent ions, hyper-oxidized metal ions, and metal complexes. (CS)

  12. Magnetomigration of rare-earth ions in inhomogeneous magnetic fields.

    Science.gov (United States)

    Franczak, Agnieszka; Binnemans, Koen; Jan Fransaer

    2016-10-05

    The effects of external inhomogenous (gradient) magnetic fields on the movement of the rare-earth ions: Dy(3+), Gd(3+) and Y(3+), in initially homogeneous aqueous solutions have been investigated. Differences in the migration of rare-earth ions in gradient magnetic fields were observed, depending on the magnetic character of the ions: paramagnetic ions of Dy(3+) and Gd(3+) move towards regions of the sample where the magnetic field gradient is the strongest, while diamagnetic ions of Y(3+) move in the opposite direction. It has been showed that the low magnetic field gradients, such the ones generated by permanent magnets, are sufficient to observe the magnetomigration effects of the ions in solution. The present work clearly establishes the behavior of magnetically different ions in initially homogeneous aqueous solutions exposed to magnetic field gradients. To this avail, a methodology for measuring the local concentration differences of metal ions in liquid samples was developed.

  13. Bioavailability of Metal Ions and Evolutionary Adaptation

    Directory of Open Access Journals (Sweden)

    Rolando P. Hong Enriquez

    2012-10-01

    Full Text Available The evolution of life on earth has been a long process that began nearly 3,5 x 109 years ago. In their initial moments, evolution was mainly influenced by anaerobic environments; with the rise of O2 and the corresponding change in bioavailability of metal ions, new mechanisms of survival were created. Here we review the relationships between ancient atmospheric conditions, metal ion bioavailability and adaptation of metals homeostasis during early evolution. A general picture linking geochemistry, biochemistry and homeostasis is supported by the reviewed literature and is further illustrated in this report using simple database searches.

  14. Optical Properties of Li2B4O7 Glasses Doped with Rare-Earths and Transition Metal Ions

    Science.gov (United States)

    2001-01-01

    K.P. O’Donnell, B. Henderson and D. Hollis, " Disorder and the optical spectroscopy of Cr 3+- doped glasses: II. Glasses with high and low ligand...ions in oxide compounds", Fiz. Tw. Tela, 31(1), pp. 243-249, 1989. 11. W. Chen, J.O. Maim, V. Zwiller, Y. Huang, S. Liu, R. Wallenberg , J.O. Bovin and L

  15. {sup 1}H and {sup 23}Na MAS NMR spectroscopy of cationic species in CO{sub 2} selective alkaline earth metal porous silicoaluminophosphates prepared via liquid and solid state ion exchange

    Energy Technology Data Exchange (ETDEWEB)

    Arevalo-Hidalgo, Ana G. [Department of Chemical Engineering, University of Puerto Rico-Mayagueez Campus, Mayagueez, PR 00681-9000 (Puerto Rico); Dugar, Sneha; Fu, Riqiang [National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32310 (United States); Hernandez-Maldonado, Arturo J., E-mail: arturoj.hernandez@upr.edu [Department of Chemical Engineering, University of Puerto Rico-Mayagueez Campus, Mayagueez, PR 00681-9000 (Puerto Rico)

    2012-07-15

    The location of extraframework cations in Sr{sup 2+} and Ba{sup 2+} ion-exchanged SAPO-34 was estimated by means of {sup 1}H and {sup 23}Na MAS NMR spectroscopy and spectral deconvolution. Incorporation of the alkaline earth metal cations onto the SAPO framework was achieved via liquid state ion exchange, coupled partial detemplation/solid-state ion exchange, and combination of both techniques. MAS NMR revealed that the level of ion exchange was limited by the presence of protons and sodium cations near hexagonal prisms (site SI), which are relatively difficult to exchange with the alkaline earth metal due to steric and charge repulsion criteria. In addition, the presence of ammonium cations in the supercages facilitated the exchange of otherwise tenacious hydrogen as corroborated by unit cell compositional data as well as enhanced CO{sub 2} adsorption at low partial pressures. The extraframework ammonium species were produced from partial detemplation of the structure-directing agent employed for the SAPO-34 synthesis, tetraethylammonium. - Graphical abstract: MAS NMR was used to elucidate the position the cationic species in alkaline earth metal exchanged silicoaluminophosphates. These species played a significant role during the ion exchange process and, therefore, the materials ultimate CO{sub 2} adsorption performance. Highlights: Black-Right-Pointing-Pointer Location of extraframework Sr{sup 2+} or Ba{sup 2+} cations was estimated by means of {sup 1}H and {sup 23}Na MAS NMR. Black-Right-Pointing-Pointer Level of Sr{sup 2+} or Ba{sup 2+} ion exchange was limited by the presence of protons and sodium cations. Black-Right-Pointing-Pointer Presence of ammonium cations in the supercages facilitated the exchange. Black-Right-Pointing-Pointer Sr{sup 2+} and Ba{sup 2+} ion exchanged SAPOs are outstanding CO{sub 2} adsorbents.

  16. Metal sulfide and rare-earth phosphate nanostructures and methods of making same

    Science.gov (United States)

    Wong, Stanislaus; Zhang, Fen

    2016-06-28

    The present invention provides a method of producing a crystalline rare earth phosphate nanostructure. The method comprising: providing a rare earth metal precursor solution and providing a phosphate precursor solution; placing a porous membrane between the metal precursor solution and the phosphate precursor solution, wherein metal cations of the metal precursor solution and phosphate ions of the phosphate precursor solution react, thereby producing a crystalline rare earth metal phosphate nanostructure.

  17. Transition metal (Cr{sup 3+}) and rare earth (Eu{sup 3+}, Dy{sup 3+}) ions used as a spectroscopic probe in compositional-dependent lead borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Pisarski, W.A., E-mail: Wojciech.Pisarski@us.edu.p [University of Silesia, Institute of Chemistry, Szkolna 9, 40-007 Katowice (Poland); Pisarska, J. [Silesian University of Technology, Department of Materials Science, Krasinskiego 8, 40-019 Katowice (Poland); Dominiak-Dzik, G.; Ryba-Romanowski, W. [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okolna 2, 50-422 Wroclaw (Poland)

    2009-09-18

    Compositional-dependent lead borate glasses doped with transition metal and rare earth ions were studied using absorption and luminescence spectroscopy. The trivalent Cr{sup 3+}, Eu{sup 3+} and Dy{sup 3+} ions were used as a spectroscopic probe in glass samples with various PbO/B{sub 2}O{sub 3} ratios. Spectral analysis indicates that Cr{sup 3+} ions occupy intermediate field sites; the both sites coexist and emit from the {sup 4}T{sub 2} (low-field) and the {sup 2}E (high-field) states, respectively. The R and Y/B values due to {sup 5}D{sub 0}-{sup 7}F{sub 2}/{sup 5}D{sub 0}-{sup 7}F{sub 1} and {sup 4}F{sub 9/2}-{sup 6}H{sub 15/2}/{sup 4}F{sub 9/2}-{sup 6}H{sub 13/2} luminescence intensity ratios of Eu{sup 3+} and Dy{sup 3+} ions, respectively, increase with increasing heavy metal (PbO) content, suggesting higher asymmetry and more covalent bonding character between rare earth and oxygen ions.

  18. Rare Earth Metals: Resourcefulness and Recovery

    Science.gov (United States)

    Wang, Shijie

    2013-10-01

    When we appreciate the digital revolution carried over from the twentieth century with mobile communication and the Internet, and when we enjoy our high-tech lifestyle filled with iDevices, hybrid cars, wind turbines, and solar cells in this new century, we should also appreciate that all of these advanced products depend on rare earth metals to function. Although there are only 136,000 tons of annual worldwide demand, (Cho, Rare Earth Metals, Will We Have Enough?)1 rare earth metals are becoming such hot commodities on international markets, due to not only to their increasing uses, including in most critical military hardware, but also to Chinese growth, which accounts for 95% of global rare earth metal production. Hence, the 2013 technical calendar topic, planned by the TMS/Hydrometallurgy and Electrometallurgy Committee, is particularly relevant, with four articles (including this commentary) contributed to the JOM October Issue discussing rare earth metals' resourcefulness and recovery.

  19. Solvent Extraction of Alkaline Earth Metals with Alkylphosphorus Acids

    Institute of Scientific and Technical Information of China (English)

    XUXin; ZHUTun

    2002-01-01

    Solvent extraction equiliria of four main alkaline earth metals (magnesium, calcium, strontium and barium) with di(2-ethylhexyl) phosphoric acid (DEHPA), 2-ethylhexyl phosphonic acid mono-(2-ethylhexyl) ester, di(2,4,4-tri-methylpentyl) phosphinic acid and IR spectra of the extracts have been studied. The selectivity order is dependent of the e/r value and hydration energy of the metal ions. The minor shift of the P→O in IR absorption of the alkaline earth metal extracts indicates that the interaction between the metal ions and P→O is much weaker for alkaline earth metals than for transitional metals. The distribution of the four alkaline earth elements between aqueous solutions and solutions of DEHPA and neutral organophosphorus compunds, tri-n-butyl phosphate (TBP) or tri-octyl phosphine oxide (TOPO) in kerosene have been determined at varying ratio of TBP or TOPO to DEHPA and the positive synergism is observed. The synergic effects is explained by using IR spectra of the loaded organic phase.

  20. Recovering heavy rare earth metals from magnet scrap

    Energy Technology Data Exchange (ETDEWEB)

    Ott, Ryan T.; McCallum, Ralph W.; Jones, Lawrence L.

    2017-08-08

    A method of treating rare earth metal-bearing permanent magnet scrap, waste or other material in a manner to recover the heavy rare earth metal content separately from the light rare earth metal content. The heavy rare earth metal content can be recovered either as a heavy rare earth metal-enriched iron based alloy or as a heavy rare earth metal based alloy.

  1. Interaction of alkali and alkaline earth ions with Ochratoxin A

    Energy Technology Data Exchange (ETDEWEB)

    Poor, Miklos [Institute of Laboratory Medicine, University of Pecs, Pecs H-7624 (Hungary); Kunsagi-Mate, Sandor; Matisz, Gergely; Li, Yin; Czibulya, Zsuzsanna [Department of General and Physical Chemistry, University of Pecs, Pecs H-7624 (Hungary); Janos Szentagothai Research Center, Pecs H-7624 (Hungary); Peles-Lemli, Beata [Department of General and Physical Chemistry, University of Pecs, Pecs H-7624 (Hungary); Koszegi, Tamas, E-mail: koszegit@freemail.hu [Institute of Laboratory Medicine, University of Pecs, Pecs H-7624 (Hungary)

    2013-03-15

    The effect of alkali and alkaline earth ions on the chemical equilibrium of mono- and dianionic forms of the mycotoxin Ochratoxin A (OTA) and their bonding onto the surface of Bovine Serum Albumin (BSA) have been investigated by fluorescence spectroscopy and fluorescence polarization techniques. Our results show that alkali metal ions shift the chemical equilibrium towards formation of dianionic form of OTA. Furthermore, the alkaline earth ions can compete with BSA for binding to OTA when these ions are present in millimolar concentrations. Our data also highlight the possibility that the 'free' fraction of OTA (not bound onto the surface of albumin) or at least a part of it is present in cation-bound form in body fluids. These observations are supported by stability constants and quantum-chemical calculations. Among the studied alkaline metal ions magnesium showed the highest affinity towards OTA under physiological conditions. Further research is required to analyze the potential significance of Mg{sup 2+}-OTA complex in cellular uptake and/or elimination of the toxin in the human body. - Highlights: Black-Right-Pointing-Pointer Fluorescence spectroscopy reveals cation-Ochratoxin A (OTA) interactions. Black-Right-Pointing-Pointer Alkali ions shift the equilibrium of OTA to formation of a dianionic structure. Black-Right-Pointing-Pointer Alkaline earth ions directly bind to OTA in the order: Mg{sup 2+}, Ca{sup 2+}, Ba{sup 2+}. Black-Right-Pointing-Pointer Quantum chemical calculations and logK values support our experimental data.

  2. Bacterial antimicrobial metal ion resistance.

    Science.gov (United States)

    Hobman, Jon L; Crossman, Lisa C

    2015-05-01

    Metals such as mercury, arsenic, copper and silver have been used in various forms as antimicrobials for thousands of years with until recently, little understanding of their mode of action. The discovery of antibiotics and new organic antimicrobial compounds during the twentieth century saw a general decline in the clinical use of antimicrobial metal compounds, with the exception of the rediscovery of the use of silver for burns treatments and niche uses for other metal compounds. Antibiotics and new antimicrobials were regarded as being safer for the patient and more effective than the metal-based compounds they supplanted. Bacterial metal ion resistances were first discovered in the second half of the twentieth century. The detailed mechanisms of resistance have now been characterized in a wide range of bacteria. As the use of antimicrobial metals is limited, it is legitimate to ask: are antimicrobial metal resistances in pathogenic and commensal bacteria important now? This review details the new, rediscovered and 'never went away' uses of antimicrobial metals; examines the prevalence and linkage of antimicrobial metal resistance genes to other antimicrobial resistance genes; and examines the evidence for horizontal transfer of these genes between bacteria. Finally, we discuss the possible implications of the widespread dissemination of these resistances on re-emergent uses of antimicrobial metals and how this could impact upon the antibiotic resistance problem. © 2014 The Authors.

  3. Effect of para-substituents on alkaline earth metal ion extraction by proton di-ionizable calix[4]arene-crown-6 ligands in cone, partial-cone and 1,3-alternate conformations.

    Science.gov (United States)

    Zhou, Hui; Liu, Dazhan; Gega, Jerzy; Surowiec, Kazimierz; Purkiss, David W; Bartsch, Richard A

    2007-01-21

    Two carboxylic acid or N-(X)sulfonyl carboxamide groups were incorporated into calix[4]arene-crown-6 compounds to afford di-ionizable ligands for use in divalent metal ion separations. Acidities of the N-(X)sulfonyl carboxamide groups were tuned by variation of the electron-withdrawing properties of X. Cone, partial-cone and 1,3-alternate conformations were obtained by different synthetic strategies and their structures verified by NMR spectroscopy. Competitive solvent extractions of alkaline earth metal cations from aqueous solutions into chloroform were performed and the results compared with those reported previously for di-ionizable p-tert-butylcalix[4]arene-crown-6 analogues to probe the influence of the para-substituent on the calix[4]arene scaffold on extraction selectivity and efficiency.

  4. Catalysis using hydrous metal oxide ion exchanges

    Science.gov (United States)

    Dosch, Robert G.; Stephens, Howard P.; Stohl, Frances V.

    1985-01-01

    In a process which is catalyzed by a catalyst comprising an active metal on a carrier, said metal being active as a catalyst for the process, an improvement is provided wherein the catalyst is a hydrous, alkali metal or alkaline earth metal titanate, zirconate, niobate or tantalate wherein alkali or alkaline earth metal cations have been exchanged with a catalytically effective amount of cations of said metal.

  5. Catalysis using hydrous metal oxide ion exchangers

    Science.gov (United States)

    Dosch, R.G.; Stephens, H.P.; Stohl, F.V.

    1983-07-21

    In a process which is catalyzed by a catalyst comprising an active metal on a carrier, said metal being active as a catalyst for the process, an improvement is provided wherein the catalyst is a hydrous, alkali metal or alkaline earth metal titanate, zirconate, niobate or tantalate wherein alkali or alkaline earth metal cations have been exchanged with a catalytically effective amount of cations of said metal.

  6. A study on equilibrium and kinetics of ion exchange of alkaline earth metals using an inorganic cation exchanger - zirconium titanium phosphate

    Indian Academy of Sciences (India)

    Amin Jignasa; Thakkar Rakesh; Chudasama Uma

    2006-03-01

    An advanced inorganic cation exchange material of the class of tetravalent metal acid (TMA) salt, zirconium titanium phosphate (ZTP), has been synthesized by a modified sol-gel technique. ZTP has been characterized by elemental analysis (ICP-AES), thermal analysis (TGA), FTIR and X-ray diffraction studies. The Nernst-Planck equation has been used to study the forward and reverse ion exchange kinetics of Mg (II), Ca (II), Sr (II) and Ba (II) with H (I) at four different temperatures. The mechanism of exchange is particle diffusion, as confirmed by the linear (dimensionless time parameter) vs (time) plots. The exchange process is thus controlled by the diffusion within the exchanger particles for the systems studied herein. Further, various kinetic parameters like self-diffusion coefficient (0), energy of activation () and entropy of activation (*) have been evaluated under conditions favouring a particle diffusion-controlled mechanism.

  7. Binding to Redox-Inactive Alkali and Alkaline Earth Metal Ions Strongly Deactivates the C-H Bonds of Tertiary Amides toward Hydrogen Atom Transfer to Reactive Oxygen Centered Radicals.

    Science.gov (United States)

    Salamone, Michela; Carboni, Giulia; Mangiacapra, Livia; Bietti, Massimo

    2015-09-18

    The effect of alkali and alkaline earth metal ions on the reactions of the cumyloxyl radical (CumO(•)) with N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMA) was studied by laser flash photolysis. In acetonitrile, a >2 order of magnitude decrease in the rate constant for hydrogen atom transfer (HAT) from the C-H bonds of these substrates (kH) was measured after addition of Li(+). This behavior was explained in terms of a strong interaction between Li(+) and the oxygen atom of both DMF and DMA that increases the extent of positive charge on the amide, leading to C-H bond deactivation toward HAT to the electrophilic radical CumO(•). Similar effects were observed after addition of Ca(2+), which was shown to strongly bind up to four equivalents of the amide substrates. With Mg(2+), weak C-H deactivation was observed for the first two substrate equivalents followed by stronger deactivation for two additional equivalents. No C-H deactivation was observed in DMSO after addition of Li(+) and Mg(2+). These results point toward the important role played by metal ion Lewis acidity and solvent Lewis basicity, indicating that C-H deactivation can be modulated by varying the nature of the metal cation and solvent and allowing for careful control over the HAT reactivity of amide substrates.

  8. Rational Design of Metal Ion Sequestering Agents

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, Kenneth N.; Xu, Jide; Gramer, Christine

    1999-06-01

    This project addresses the fundamental issues and requirements for developing hazardous metal ion separation technologies applicable to the treatment and disposal of radioactive waste. Our research encompasses the following areas: the design and synthesis of metal ion specific sequestering ligands, structural and thermodynamic investigations of these ligand and the complexes formed with targeted metal ions, and the development and incorporation of these ligands into applied separation technologies as highly effective materials for hazardous metal ion decontamination.

  9. Alkali metal and alkali earth metal gadolinium halide scintillators

    Energy Technology Data Exchange (ETDEWEB)

    Bourret-Courchesne, Edith; Derenzo, Stephen E.; Parms, Shameka; Porter-Chapman, Yetta D.; Wiggins, Latoria K.

    2016-08-02

    The present invention provides for a composition comprising an inorganic scintillator comprising a gadolinium halide, optionally cerium-doped, having the formula A.sub.nGdX.sub.m:Ce; wherein A is nothing, an alkali metal, such as Li or Na, or an alkali earth metal, such as Ba; X is F, Br, Cl, or I; n is an integer from 1 to 2; m is an integer from 4 to 7; and the molar percent of cerium is 0% to 100%. The gadolinium halides or alkali earth metal gadolinium halides are scintillators and produce a bright luminescence upon irradiation by a suitable radiation.

  10. Alkaline Earth Metal Zirconate Perovskites MZrO3 (M=Ba(2+), Sr(2+), Ca(2+)) Derived from Molecular Precursors and Doped with Eu(3+) Ions.

    Science.gov (United States)

    Drąg-Jarząbek, Anna; John, Łukasz; Petrus, Rafał; Kosińska-Klähn, Magdalena; Sobota, Piotr

    2016-03-24

    The effect of alkaline earth metal alkoxides on the protonation of zirconocene dichloride was investigated. This approach enabled the design of compounds with preset molecular structures for generating high-purity binary metal oxide perovskites MZrO3 (M=Ba(2+), Sr(2+), Ca(2+)). Single-source molecular precursors [Ba4 Zr2 (μ6 -O)(μ3 ,η(2)-OR)8 (OR)2(η(2) -HOR)2 (HOR)2 Cl4], [Sr4 Zr2 (μ6 -O)(μ3 ,η(2)-OR)8 (OR)2 (HOR)4 Cl4], [Ca4 Zr2 (μ6-O)(μ3 ,η(2)-OR)8 (OR)2 Cl4], and [Ca6 Zr2 (μ2 ,η(2)-OR)12 (μ-Cl)2 (η(2) -HOR)4 Cl6 ]⋅8 CH2 Cl2 were prepared via elimination of the cyclopentadienyl ring from Cp2 ZrCl2 as CpH in the presence of M(OR)2 and alcohol ROH (ROH=CH3OCH2 CH2OH) as a source of protons. The resulting complexes were characterized by elemental analysis, IR and NMR spectroscopy, and single-crystal X-ray diffraction. The compounds were then thermally decomposed to MCl2 /MZrO3 mixtures. Leaching of MCl2 from the raw powder with deionized water produced highly pure perovskite-like oxide particles of 40-80 nm in size. Luminescence studies on Eu(3+)-doped MZrO3 revealed that the perovskites are attractive host lattices for potential applications in display technology.

  11. Dimeric Complexes of Tryptophan with M2+ Metal Ions

    NARCIS (Netherlands)

    Dunbar, R. C.; Steill, J. D.; Polfer, N. C.; Oomens, J.

    2009-01-01

    IRMPD spectroscopy using the FELIX free electron laser and a Fourier transform ICR mass spectrometer was used to characterize the structures of electrosprayed dimer complexes M(2+)Trp(2) of tryptophan with a series of eight doubly charged metal ions, including alkaline earths Ca, Sr, and Ba, and tra

  12. Metal ions, Alzheimer's disease and chelation therapy.

    Science.gov (United States)

    Budimir, Ana

    2011-03-01

    In the last few years, various studies have been providing evidence that metal ions are critically involved in the pathogenesis of major neurological diseases (Alzheimer, Parkinson). Metal ion chelators have been suggested as potential therapies for diseases involving metal ion imbalance. Neurodegeneration is an excellent target for exploiting the metal chelator approach to therapeutics. In contrast to the direct chelation approach in metal ion overload disorders, in neurodegeneration the goal seems to be a better and subtle modulation of metal ion homeostasis, aimed at restoring ionic balance. Thus, moderate chelators able to coordinate deleterious metals without disturbing metal homeostasis are needed. To date, several chelating agents have been investigated for their potential to treat neurodegeneration, and a series of 8-hydroxyquinoline analogues showed the greatest potential for the treatment of neurodegenerative diseases.

  13. Enhanced Laser Cooling of Rare-Earth-Ion-Doped Composite Material

    Institute of Scientific and Technical Information of China (English)

    JIA You-Hua; ZHONG Biao; JI Xian-Ming; YIN Jian-Ping

    2008-01-01

    We predict enhanced laser cooling performance of rare-earth-ions-doped glasses containing nanometre-sized ultrafine particles, which can be achieved by the enhancement of local field around rare earth ions, owing to the surface plasma resonance of small metallic particles. The influence of energy transfer between ions and the particle is theoretically discussed. Depending on the particle size and the ion emission quantum efficiency, the enhancement of the absorption is predicted. It is concluded that the absorption are greatly enhanced in these composite materials, the cooling power is increased as compared to the bulk material.

  14. Recovery of rare earth metals through biosorption:An overview

    Institute of Scientific and Technical Information of China (English)

    Nilanjana Das; Devlina Das

    2013-01-01

    Rare earth metals (REMs) are a series of 17 elements that have widespread and unique applications in high technology, power generation, communications, and defense industries. These resources are also pivotal to emergent sustainable energy and car-bon alternative technologies. Recovery of REMs is interesting due to its high market prices along with various industrial applications. Conventional technologies, viz. precipitation, filtration, liquid-liquid extraction, solid-liquid extraction, ion exchange, super critical extraction, electrowinning, electrorefining, electroslag refining, etc., which have been developed for the recovery of REMs, are not economically attractive. Biosorption represents a biotechnological innovation as well as a cost effective excellent tool for the recovery of rare earth metals from aqueous solutions. A variety of biomaterials such as algae, fungi, bacteria, resin, activated carbon, etc., have been reported to serve as potential adsorbents for the recovery of REMs. The metal binding mechanisms, as well as the parameters in-fluencing the uptake of rare earth metals and isotherm modeling are presented here. This article provides an overview of past achievements and current scenario of the biosorption studies carried out using some promising biosorbents which could serve as an economical means for recovering REMs. The experimental findings reported by different workers will provide insights into this re-search frontier.

  15. Solvation structures and dynamics of alkaline earth metal halides in supercritical water: A molecular dynamics study

    Science.gov (United States)

    Keshri, Sonanki; Mandal, Ratnamala; Tembe, B. L.

    2016-09-01

    Constrained molecular dynamics simulations of alkaline earth metal halides have been carried out to investigate their structural and dynamical properties in supercritical water. Potentials of mean force (PMFs) for all the alkaline earth metal halides in supercritical water have been computed. Contact ion pairs (CIPs) are found to be more stable than all other configurations of the ion pairs except for MgI2 where solvent shared ion pair (SShIP) is more stable than the CIP. There is hardly any difference in the PMFs between the M2+ (M = Mg, Ca, Sr, Ba) and the X- (X = F, Cl, Br, I) ions whether the second X- ion is present in the first coordination shell of the M2+ ion or not. The solvent molecules in the solvation shells diffuse at a much slower rate compared to the bulk. Orientational distribution functions of solvent molecules are sharper for smaller ions.

  16. Achievements in the Project-"The Adsorption of Rare Earth Metal Ions and Ligands on Steel, Aluminum and its Synergistic Mechanism"

    Institute of Scientific and Technical Information of China (English)

    Li Xianghong; Qu Qing; Jiang Shu'an; Zhou Jun

    2006-01-01

    @@ 1. Background Corrosion is a fundamental process that plays an important role in economics and safety, particularly for metals and alloys. Nowadays, corrosion problems have received a considerable amount of attentions. The annual direct cost of metallic corrosion ranges from 2% to 4% of national GDP in industrialized countries, and this cost sounds escalating in the future.

  17. Magnetic Behavior of Some Rare-Earth Transition-Metal Perovskite Oxide Systems

    Institute of Scientific and Technical Information of China (English)

    Kenji Yoshii; Akio Nakamura; Masaichiro Mizumaki; Naoshi Ikeda; Jun'ichiro Mizuki

    2004-01-01

    Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed for a few systems:magnetization peak effect in the titanates, magnetization reversal in the chromites and metallic ferromagnetism in the cobaltites. The results suggest an important role of the rare-earth ions for the magnetic properties of such complex oxides.

  18. Metal Ion Controlled Polymorphism of a Peptide

    DEFF Research Database (Denmark)

    Hemmingsen, Lars Bo Stegeager; Jancso, Attila; Szunyogh, Daniel;

    2011-01-01

    , …) in the peptide, and the ligand and structural preferences of the metal ion (in our studies Zn2+, Cd2+, Hg2+, Cu+/2+). Simultaneously, new species such as metal ion bridged ternary complexes or even oligomers may be formed. In recent previous studies we have observed similar polymorphism of zinc finger model...

  19. Instability of some divalent rare earth ions and photochromic effect

    Science.gov (United States)

    Egranov, A. V.; Sizova, T. Yu.; Shendrik, R. Yu.; Smirnova, N. A.

    2016-03-01

    It was shown that the divalent rare earth ions (La, Ce, Gd, Tb, Lu, and Y) in cubic sites in alkaline earth fluorides are unstable with respect to electron autodetachment since its d1(eg) ground state is located in the conduction band which is consistent with the general tendency of these ions in various compounds. The localization of doubly degenerate d1(eg) level in the conduction band creates a configuration instability around the divalent rare earth ion that leading to the formation of anion vacancy in the nearest neighborhood, as was reported in the previous paper [A. Egranov, T. Sizova, Configurational instability at the excited impurity ions in alkaline earth fluorites, J. Phys. Chem. Solids 74 (2013) 530-534]. Thus, the formation of the stable divalent ions as La, Ce, Gd, Tb, Lu, and Y (PC+ centers) in CaF2 and SrF2 crystals during x-ray irradiation occurs via the formation of charged anion vacancies near divalent ions (Re2+va), which lower the ground state of the divalent ion relative to the conductivity band. Photochromic effect occurs under thermally or optically stimulated electron transition from the divalent rare earth ion to the neighboring anion vacancy and reverse under ultraviolet light irradiation. It is shown that the optical absorption of the PC+ centers due to d → d and d → f transitions of the divalent rare-earth ion.

  20. Correlations in rare-earth transition-metal permanent magnets

    Energy Technology Data Exchange (ETDEWEB)

    Skomski, R., E-mail: rskomski@neb.rr.com; Manchanda, P. [Department of Physics and Astronomy and NCMN, University of Nebraska, Lincoln, Nebraska 68508 (United States); Kashyap, A. [School of Basic Science, IIT Mandi, Mandi, Himachal Pradesh (India)

    2015-05-07

    It is investigated how electron-electron correlations affect the intrinsic properties of rare-earth transition-metal magnets. Focusing on orbital moment and anisotropy, we perform model calculations for 3d-4f alloys and density-functional theory (DFT) calculations for NdCo{sub 5}. On an independent-electron level, the use of a single Slater determinant with broken spin symmetry introduces Hund's rule correlations, which govern the behavior of rare-earth ions and of alloys described by the local spin density approximation (LSDA) and LSDA + U approximations to DFT. By contrast, rare-earth ions in intermetallics involve configuration interactions between two or more Slater determinants and lead to phenomena such as spin-charge distribution. Analyzing DFT as a Legendre transformation and using Bethe's crystal-field theory, we show that the corresponding density functionals are very different from familiar LSDA-type expressions and outline the effect of spin-charge separation on the magnetocrystalline anisotropy.

  1. Supramolecular recognition control of polyethylene glycol modified N-doped graphene quantum dots: tunable selectivity for alkali and alkaline-earth metal ions.

    Science.gov (United States)

    Yang, Siwei; Sun, Jing; Zhu, Chong; He, Peng; Peng, Zheng; Ding, Guqiao

    2016-02-07

    The graphene quantum dot based fluorescent probe community needs unambiguous evidence about the control on the ion selectivity. In this paper, polyethylene glycol modified N-doped graphene quantum dots (PN-GQDs) were synthesized by alkylation reaction between graphene quantum dots and organic halides. We demonstrate the tunable selectivity and sensitivity by controlling the supramolecular recognition through the length and the end group size of the polyether chain on PN-GQDs. The relationship formulae between the selectivity/detection limit and polyether chains are experimentally deduced. The polyether chain length determines the interaction between the PN-GQDs and ions with different ratios of charge to radius, which in turn leads to a good selectivity control. Meanwhile the detection limit shows an exponential growth with the size of end groups of the polyether chain. The PN-GQDs can be used as ultrasensitive and selective fluorescent probes for Li(+), Na(+), K(+), Mg(2+), Ca(2+) and Sr(2+), respectively.

  2. Effect of Some Metal Ion Dopants on Electrochemical Properties of Ni(OH)2 Film Electrode

    Institute of Scientific and Technical Information of China (English)

    ZHANG Heng-bin; LIU Han-san; CAO Xue-jing; SUN Chia-chung

    2003-01-01

    The Ni(OH)2 film electrodes doped respectively with alkali-earth metal aluminum, lead, partial transition metal and some rare-earth metal(altogether 17 kinds of metals) ions were prepared by cathode electrodeposition. The electrode reaction reversibility, the difficult extent of oxygen evolution, the proton diffusion coefficient, the discharge potential of middle value and the active material utilization of the Ni(OH)2 film electrode were compared with those of the ones doped with the metal ions by means of cyclic voltammetry, potential step and constant current charge-discharge experiments. It was found that Ca2+, Co2+, Cd2+, Al3+ etc. have obviously positive effect.

  3. Metal enhanced fluorescence in rare earth doped plasmonic core-shell nanoparticles.

    Science.gov (United States)

    Derom, S; Berthelot, A; Pillonnet, A; Benamara, O; Jurdyc, A M; Girard, C; Colas des Francs, G

    2013-12-13

    We theoretically and numerically investigate metal enhanced fluorescence of plasmonic core-shell nanoparticles doped with rare earth (RE) ions. Particle shape and size are engineered to maximize the average enhancement factor (AEF) of the overall doped shell. We show that the highest enhancement (11 in the visible and 7 in the near-infrared) is achieved by tuning either the dipolar or the quadrupolar particle resonance to the rare earth ion's excitation wavelength. Additionally, the calculated AEFs are compared to experimental data reported in the literature, obtained in similar conditions (plasmon mediated enhancement) or when a metal-RE energy transfer mechanism is involved.

  4. Some Rare Earth Metallic Organohydrides with Biindenyl as the Ligand

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Introduction It is well known that organometallic hydrides of rare earth metals are the catalysts and reducing reagents for the catalysis polymerization of alkenes and the catalysis hydrogenation of alkenoalkynes. There are four methods for the syntheses of organometallic hydrides of rare earth metals: (1) the thermal atomization of metals, I. E. , the interaction of a rare earth metal with alkenes with a terminal alkyne; (2) the Ln-C σ bond is broken with H2; (3) metallic hydride replacement[1], I. E., NaBH4, LiA1H4 and Na can be used to react with organometallic compounds of rare earth metals; (4) the elimination ofβ-H, I. E. , in the presence of LiC1, the elimination of theβ-H of the alkyl compounds of rare earth metals gives the target product. The organohydrides of biindenyl samarium, biindenyl gadolinium and biin denyl dysprosium were obtained with NaH reduction method.

  5. Instability of some divalent rare earth ions and photochromic effect

    OpenAIRE

    Egranov, A. V.; Sizova, T. Yu.; Shendrik, R. Yu.; Smirnova, N. A.

    2015-01-01

    It was shown that the divalent rare earth ions (La, Ce, Gd, Tb, Lu, and Y) in cubic sites in alkaline earth fluorides are unstable with respect to electron autodetachment since its d1(eg) ground state is located in the conduction band which is consistent with the general tendency of these ions in various compounds. The localization of doubly degenerate d1(eg) level in the conduction band creates a configuration instability around the divalent rare earth ion that leading to the formation of an...

  6. Recovery of metal ions by microfungal filters.

    Science.gov (United States)

    Wales, D S; Sagar, B F

    1990-01-01

    Many microfungi contain chitin/chitosan as an integral part of the cell wall structure. The binding of toxic and heavy metal ions by chitosan or partly deacetylated chitin is a direct consequence of the base strength of the primary amine group and is most effective for those metals that form complexes with ammonia. Of the microfungi studied, hyphae from Mucor mucedo and Rhizomucor miehei, after treatment with hydroxide to expose the chitin/chitosan, were found to be most effective in the capture of metal ions. Chemically treated mycelia have so far been shown to bind silver, zinc, lead, copper, nickel, cobalt, cadmium, iron and chromium, with the efficiency of metal-ion binding apparently being inversely proportional to the valency state of the metal ions to be bound. Wet-laid papers produced from mixed slurries of treated mycelia and various conventional paper-making and textile fibres have exceptionally good tensile- and bursting-strength properties, particularly in the wet state. Papers containing 1 g treated mycelia removed up to 90% of various metal ions in solution (50 cm3, 1.5 mmol dm-3) with flow rates of 0.5 cm3 cm-2 min-1. However, the total metal-ion binding capacities of single-thickness microfungal papers are limited under constant flow conditions. The total volume flowing through the system before metal-ion breakthrough occurs increases in direct proportion to the number of sheets of microfungal paper but the concomitant reduction in flow rates becomes a limiting factor. Mycelia-containing structures that allow efficient metal-ion binding at commercially acceptable flow rates are currently being investigated.

  7. Global Earthing Systems: Characterization of Buried Metallic Parts

    OpenAIRE

    Tommasini, Riccardo; Colella, Pietro; Pons, Enrico

    2016-01-01

    International Standards IEC 61936-1 and EN 50522 define a Global Earthing System (GES) as the earthing network, created by the interconnection of local earthing systems, that should guarantee the absence of dangerous touch voltages. This is achieved through two effects: the division of the earth fault current between many earthing systems and the creation of a quasi equipotential surface. The second effect can be enhanced by the presence of buried metallic parts, such as light poles and water...

  8. Gyroscopic g factor of rare earth metals

    Science.gov (United States)

    Ogata, Y.; Chudo, H.; Ono, M.; Harii, K.; Matsuo, M.; Maekawa, S.; Saitoh, E.

    2017-02-01

    We develop the in situ magnetization measurement apparatus for observing the Barnett effect consisting of a fluxgate sensor, a high speed rotor with frequencies of up to 1.5 kHz, and a magnetic shield at room temperature. The effective magnetic field (Barnett field) in a sample arising from rotation magnetizes the sample and is proportional to the rotational frequency. The gyroscopic g factor, g ' , of rare earth metals, in particular, Gd, Tb, and Dy, was estimated to be 2.00 ± 0.08, 1.53 ± 0.17, and 1.15 ± 0.32, respectively, from the slopes of the rotation dependence of the Barnett field. This study provides a technique to determine the g ' factor even in samples where the spectroscopic method may not be available.

  9. Metal ion coordination, conditional stability constants, and solution behavior of chelating surfactant metal complexes.

    Science.gov (United States)

    Svanedal, Ida; Boija, Susanne; Almesåker, Ann; Persson, Gerd; Andersson, Fredrik; Hedenström, Erik; Bylund, Dan; Norgren, Magnus; Edlund, Håkan

    2014-04-29

    Coordination complexes of some divalent metal ions with the DTPA (diethylenetriaminepentaacetic acid)-based chelating surfactant 2-dodecyldiethylenetriaminepentaacetic acid (4-C12-DTPA) have been examined in terms of chelation and solution behavior. The headgroup of 4-C12-DTPA contains eight donor atoms that can participate in the coordination of a metal ion. Conditional stability constants for five transition metal complexes with 4-C12-DTPA were determined by competition measurements between 4-C12-DTPA and DTPA, using electrospray ionization mass spectrometry (ESI-MS). Small differences in the relative strength between the coordination complexes of DTPA and 4-C12-DTPA indicated that the hydrocarbon tail only affected the chelating ability of the headgroup to a limited extent. The coordination of Cu(2+) ions was investigated in particular, using UV-visible spectroscopy. By constructing Job's plots, it was found that 4-C12-DTPA could coordinate up to two Cu(2+) ions. Surface tension measurements and NMR diffusometry showed that the coordination of metal ions affected the solution behavior of 4-C12-DTPA, but there were no specific trends between the studied divalent metal complexes. Generally, the effects of the metal ion coordination could be linked to the neutralization of the headgroup charge of 4-C12-DTPA, and the resulting reduced electrostatic repulsions between adjacent surfactants in micelles and monolayers. The pH vs concentration plots, on the other hand, showed a distinct difference between 4-C12-DTPA complexes of the alkaline earth metals and the transition metals. This was explained by the difference in coordination between the two groups of metal ions, as predicted by the hard and soft acid and base (HSAB) theory.

  10. Rare-earth-ion-doped double-tungstate waveguides

    NARCIS (Netherlands)

    Pollnau, M.

    2007-01-01

    It has been recognized that the monoclinic double tungstates KY(WO4)2, KGd(WO4)2, and KLu(WO4)2 possess a high potential as rare-earth-ion-doped solid-state laser materials, partly due to the high absorption and emission cross-sections of rare-earth ions when doped into these materials. Besides, the

  11. Metal Ion Modeling Using Classical Mechanics.

    Science.gov (United States)

    Li, Pengfei; Merz, Kenneth M

    2017-02-08

    Metal ions play significant roles in numerous fields including chemistry, geochemistry, biochemistry, and materials science. With computational tools increasingly becoming important in chemical research, methods have emerged to effectively face the challenge of modeling metal ions in the gas, aqueous, and solid phases. Herein, we review both quantum and classical modeling strategies for metal ion-containing systems that have been developed over the past few decades. This Review focuses on classical metal ion modeling based on unpolarized models (including the nonbonded, bonded, cationic dummy atom, and combined models), polarizable models (e.g., the fluctuating charge, Drude oscillator, and the induced dipole models), the angular overlap model, and valence bond-based models. Quantum mechanical studies of metal ion-containing systems at the semiempirical, ab initio, and density functional levels of theory are reviewed as well with a particular focus on how these methods inform classical modeling efforts. Finally, conclusions and future prospects and directions are offered that will further enhance the classical modeling of metal ion-containing systems.

  12. Metal Ion Modeling Using Classical Mechanics

    Science.gov (United States)

    2017-01-01

    Metal ions play significant roles in numerous fields including chemistry, geochemistry, biochemistry, and materials science. With computational tools increasingly becoming important in chemical research, methods have emerged to effectively face the challenge of modeling metal ions in the gas, aqueous, and solid phases. Herein, we review both quantum and classical modeling strategies for metal ion-containing systems that have been developed over the past few decades. This Review focuses on classical metal ion modeling based on unpolarized models (including the nonbonded, bonded, cationic dummy atom, and combined models), polarizable models (e.g., the fluctuating charge, Drude oscillator, and the induced dipole models), the angular overlap model, and valence bond-based models. Quantum mechanical studies of metal ion-containing systems at the semiempirical, ab initio, and density functional levels of theory are reviewed as well with a particular focus on how these methods inform classical modeling efforts. Finally, conclusions and future prospects and directions are offered that will further enhance the classical modeling of metal ion-containing systems. PMID:28045509

  13. Solid-liquid solvent extraction of metal ions

    Institute of Scientific and Technical Information of China (English)

    Bo Peng; Haiyan Fan; Jinzhang Gao

    2003-01-01

    An overview of extraction of some trace metal ions using molten solvent (low melting substance) during last two decadesis presented. The development of this technique since its inception is briefly traced. The comparison of extraction efficiency, thermo-dynamics and kinetics mainly involving extraction of rare earth ions between molten solvent extraction at high temperature and usualliquid-liquid extraction at room temperature are discussed in detail. The various parameters obtained from the previous and presentstudies such as equilibrium extraction constant Kex, pH1/2, thermodynamic and kinetic data are displayed in tabular form. Finally, thecurrent demands, disadvantages and future prospects are also evaluated.

  14. Gas and metal ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Oaks, E. [High Current Electronics Institute, Tomsk (Russian Federation)]|[State Academy of Control System and Radioelectronics, Tomsk (Russian Federation); Yushkov, G. [High Current Electronics Institute, Tomsk (Russian Federation)

    1996-08-01

    The positive ion sources are now of interest owing to both their conventional use, e.g., as injectors in charged-particle accelerators and the promising capabilities of intense ion beams in the processes related to the action of ions on various solid surfaces. For industrial use, the sources of intense ion beams and their power supplies should meet the specific requirements as follows: They should be simple, technologically effective, reliable, and relatively low-cost. Since the scanning of an intense ion beam is a complicated problem, broad ion beams hold the greatest promise. For the best use of such beams it is desirable that the ion current density be uniformly distributed over the beam cross section. The ion beam current density should be high enough for the treatment process be accomplished for an acceptable time. Thus, the ion sources used for high-current, high-dose metallurgical implantation should provide for gaining an exposure dose of {approximately} 10{sup 17} cm{sup {minus}2} in some tens of minutes. So the average ion current density at the surface under treatment should be over 10{sup {minus}5} A/cm{sup 2}. The upper limit of the current density depends on the admissible heating of the surface under treatment. The accelerating voltage of an ion source is dictated by its specific use; it seems to lie in the range from {approximately}1 kV (for the ion source used for surface sputtering) to {approximately}100 kV and over (for the ion sources used for high-current, high-dose metallurgical implantation).

  15. Capacity-controllable nanocarriers for metal ions

    NARCIS (Netherlands)

    Yan, Y.; Keizer, de A.; Cohen Stuart, M.A.; Besseling, N.A.M.

    2009-01-01

    We report on capacity-controllable nanocarrier system for metal ions based on a novel kind of polymeric microemulsion. These microemulsions are formed in mixed systems of negatively charged metal-bisligand coordination polymers (cp), positively charged homopolyelectrolyte (hp), and positive-neutral

  16. Bioinorganic Chemistry of the Alkali Metal Ions.

    Science.gov (United States)

    Kim, Youngsam; Nguyen, Thuy-Tien T; Churchill, David G

    2016-01-01

    The common Group 1 alkali metals are indeed ubiquitous on earth, in the oceans and in biological systems. In this introductory chapter, concepts involving aqueous chemistry and aspects of general coordination chemistry and oxygen atom donor chemistry are introduced. Also, there are nuclear isotopes of importance. A general discussion of Group 1 begins from the prevalence of the ions, and from a comparison of their ionic radii and ionization energies. While oxygen and water molecule binding have the most relevance to biology and in forming a detailed understanding between the elements, there is a wide range of basic chemistry that is potentially important, especially with respect to biological chelation and synthetic multi-dentate ligand design. The elements are widely distributed in life forms, in the terrestrial environment and in the oceans. The details about the workings in animal, as well as plant life are presented in this volume. Important biometallic aspects of human health and medicine are introduced as well. Seeing as the elements are widely present in biology, various particular endogenous molecules and enzymatic systems can be studied. Sodium and potassium are by far the most important and central elements for consideration. Aspects of lithium, rubidium, cesium and francium chemistry are also included; they help in making important comparisons related to the coordination chemistry of Na(+) and K(+). Physical methods are also introduced.

  17. Computational Design of Metal Ion Sequestering Agents

    Energy Technology Data Exchange (ETDEWEB)

    Hay, Benjamin P.; Rapko, Brian M.

    2006-06-01

    Organic ligands that exhibit a high degree of metal ion recognition are essential precursors for developing separation processes and sensors for metal ions. Since the beginning of the nuclear era, much research has focused on discovering ligands that target specific radionuclides. Members of the Group 1A and 2A cations (e.g., Cs, Sr, Ra) and the f-block metals (actinides and lanthanides) are of primary concern to DOE. Although there has been some success in identifying ligand architectures that exhibit a degree of metal ion recognition, the ability to control binding affinity and selectivity remains a significant challenge. The traditional approach for discovering such ligands has involved lengthy programs of organic synthesis and testing that, in the absence of reliable methods for screening compounds before synthesis, have resulted in much wasted research effort.

  18. Separation of metal ions in nitrate solution by ultrasonic atomization

    Science.gov (United States)

    Sato, Masanori; Ikeno, Masayuki; Fujii, Toshitaka

    2004-11-01

    In the ultrasonic atomization of metal nitrate solutions, the molar ratio of metal ions is changed between solution and mist. Small molar metal ions tend to be transferred to mist by ultrasonic wave acceleration, while large molar ions tend to remain in solution. As a result, metal ions can be separated by ultrasonic atomization. We show experimental data and propose a conceptual mechanism for the ultrasonic separation of metal ions.

  19. Biogenic oxygen from Earth transported to the Moon by a wind of magnetospheric ions

    Science.gov (United States)

    Terada, Kentaro; Yokota, Shoichiro; Saito, Yoshifumi; Kitamura, Naritoshi; Asamura, Kazushi; Nishino, Masaki N.

    2017-01-01

    For five days of each lunar orbit, the Moon is shielded from solar wind bombardment by the Earth's magnetosphere, which is filled with terrestrial ions. Although the possibility of the presence of terrestrial nitrogen and noble gases in lunar soil has been discussed based on their isotopic composition 1 , complicated oxygen isotope fractionation in lunar metal 2,3 (particularly the provenance of a 16O-poor component) re­mains an enigma 4,5 . Here, we report observations from the Japanese spacecraft Kaguya of significant numbers of 1-10 keV O+ ions, seen only when the Moon was in the Earth's plasma sheet. Considering the penetration depth into metal of O+ ions with such energy, and the 16O-poor mass-independent fractionation of the Earth's upper atmosphere 6 , we conclude that biogenic terrestrial oxygen has been transported to the Moon by the Earth wind (at least 2.6 × 104 ions cm‑2 s‑1) and implanted into the surface of the lunar regolith, at around tens of nanometres in depth 3,4 . We suggest the possibility that the Earth's atmosphere of billions of years ago may be preserved on the present-day lunar surface.

  20. Ion beam analysis of metal ion implanted surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evans, P.J.; Chu, J.W.; Johnson, E.P.; Noorman, J.T. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Sood, D.K. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Ion implantation is an established method for altering the surface properties of many materials. While a variety of analytical techniques are available for the characterisation of implanted surfaces, those based on particle accelerators such as Rutherford backscattering (RBS) and nuclear reaction analysis (NRA) provide some of the most useful and powerful for this purpose. Application of the latter techniques to metal ion implantation research at ANSTO will be described with particular reference to specific examples from recent studies. Where possible, the information obtained from ion beam analysis will be compared with that derived from other techniques such as Energy Dispersive X-ray (EDX) and Auger spectroscopies. 4 refs., 5 figs.

  1. New Proton-Ionizable, Calixarene-Based Ligands for Selective Metal Ion Separations

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, Richard A.

    2012-06-04

    The project objective was the discovery of new ligands for performing metal ion separations. The research effort entailed the preparation of new metal ion complexing agents and polymers and their evaluation in metal ion separation processes of solvent extraction, synthetic liquid membrane transport, and sorption. Structural variations in acyclic, cyclic, and bicyclic organic ligands were used to probe their influence upon the efficiency and selectivity with which metal ion separations can be performed. A unifying feature of the ligand structures is the presence of one (or more) side arm with a pendent acidic function. When a metal ion is complexed within the central cavity of the ligand, ionization of the side arm(s) produces the requisite anion(s) for formation of an overall electroneutral complex. This markedly enhances extraction/transport efficiency for separations in which movement of aqueous phase anions of chloride, nitrate, or sulfate into an organic medium would be required. Through systematic structural variations, new ligands have been developed for efficient and selective separations of monovalent metal ions (e.g., alkali metal, silver, and thallium cations) and of divalent metal ion species (e.g., alkaline earth metal, lead, and mercury cations). Research results obtained in these fundamental investigations provide important insight for the design and development of ligands suitable for practical metal ion separation applications.

  2. Earth's polar cap ionization patches lead to ion upflow

    Science.gov (United States)

    Zhang, Q. H.; Zong, Q.; Lockwood, M. M.; Liang, J.; Zhang, B.; Moen, J. I.; Zhang, S.; Zhang, Y.; Ruohoniemi, J. M.; Thomas, E. G.; Liu, R.; Dunlop, M. W.; Yang, H. G.; Hu, H.; Liu, Y.; Lester, M.

    2014-12-01

    The Earth constantly losses matter through ions escaping from the polar ionosphere. This makes the ionosphere as an important source of plasma for the magnetosphere and could modulate atmospheric isotope abundances on geological timescales, depending on what fraction of the upflowing ions subsequently return to the ionosphere and what fraction are ejected into interplanetary space. It has been proposed that the magnetosphere is dynamically modulated by the presence of the ionospheric ions, particularly heavy ions O+, during magnetic substorms and storms. The origin and formation mechanism of ionospheric ion upflow is, however, poorly understood, particularly under disturbed space weather conditions. We report simultaneous direct observations of ion upflow and a patch of ionization at the center of the polar cap region during a geomagnetic storm. Our observations indicate enhanced fluxes of upwelling O+ ions originate from the patch and were accelerated by the enhanced ambipolar electric field. This enhancement is caused by soft electron precipitations. Polar cap patches therefore provide an important source of upwelling ions for accelerations mechanisms at greater altitudes which can eject the ions. These observations give new insight into the processes of ionosphere-magnetosphere coupling and the potential loss of terrestrial water dissociation products into space which, although extremely slow in the case of Earth, may be significant for other planets and moons.

  3. [Development of trace metal ion analysis].

    Science.gov (United States)

    Kobayashi, J

    2000-09-01

    Analyses of trace biologically essential or toxic ionic compounds found in the environment are very important. However, the lack of sensitivity and interference caused by coexisting components are often serious problems. To determine trace levels of metal ions without the above problems, new preconcentration and analytical methods have been developed. Firstly, three methods for the selective preconcentration of metal ions are shown below: 1) 3-Chloropyridazine-6-carbohydrazide was immobilized on glass beads supports to be used as a column packing material. Multi-metal ions were concentrated on the column and eluted selectively with several buffers and hydrochloric acid. The eluate was analyzed off-line by flame atomized-atomic absorption spectrometry (AAS). This method was able to determine sub-ppb levels of cupper- and cadmium-ions in environmental samples. 2) Salicylideneamino-2-thiophenol was immobilized on the supports. Aluminum ion was concentrated selectively on the column and eluted with nitric acid. The eluate was analyzed off-line by flameless-AAS or on-line by flow injection analysis using pyrocatechol violet for a post-column colorimetric reagent. These methods were able to determine ppb-ppt levels of aluminium in environmental samples and were suitable for its state-analysis. 3) Bathocuproinesulfonic acid was immobilized on the supports. Copper ion was concentrated selectively on the column and eluted with nitric acid. The eluate was analyzed on-line by flow injection analysis using bathocuproinesulfonic acid. This method was able to determine sub-ppb levels of copper in environmental samples. On the other hand, to analyze simultaneously trace metal ions and anions, capillary electrophoresis was performed using ethylenediaminetetraacetic acid as an electrolyte component. Simultaneous determination of several ions in mineral waters was achieved by the system.

  4. Multiheteromacrocycles that Complex Metal Ions. Sixth Progress Report, 1 May 1979-30 April 1980

    Science.gov (United States)

    Cram, D. J.

    1980-01-15

    Objective is to design synthesize, and evaluate cyclic and polycyclic host organic compounds for their abilities to complex and lipophilize guest metal ions, their complexes, and their clusters. Host organic compounds consist of strategically placed solvating, coordinating, and ion-pairing sites tied together by covalent bonds through hydrocarbon units around cavities shaped to be occupied by guest metal ions or by metal ions plus their ligands. Specificity in complexation is sought by matching the following properties of host and guest: cavity and metal ion sizes; geometric arrangements of binding sites; number of binding sites; character of binding sites; and valences. During this period, hemispherands based on an aryloxy or cyclic urea unit, spherands based on aryloxyl units only, and their complexes with alkali metals and alkaline earths were investigated. An attempt to separate {sup 6}Li and {sup 7}Li by gel permeation chromatography of lithiospherium chloride failed. (DLC)

  5. Syntheses and structures of new rare-earth metal tetracyanidoborates

    Energy Technology Data Exchange (ETDEWEB)

    Falk, Fanni; Hackbarth, Liisa; Koeckerling, Martin [Anorganische Festkoerperchemie, Institut fuer Chemie, Universitaet Rostock, Albert-Einstein-Str. 3a, 18059, Rostock (Germany); Herkert, Lorena; Mueller-Buschbaum, Klaus; Finze, Maik [Institut fuer Anorganische Chemie, Institut fuer nachhaltige Chemie and Katalyse mit Bor (ICB), Julius-Maximilians-Universitaet Wuerzburg, Am Hubland, 97074, Wuerzburg (Germany)

    2017-05-04

    Six new rare-earth metal tetracyanidoborates were prepared and characterized by single-crystal X-ray diffraction. Crystals of these salts contain co-crystallized solvent molecules, such as water, acetone, ethanol, or diethyl ether. In [La(EtOH){sub 3}(H{sub 2}O){sub 2}{B(CN)_4}{sub 3}] (1), [La(EtOH)(H{sub 2}O){sub 4}{B(CN)_4}{sub 3}].Et{sub 2}O (2), and [Y(EtOH)(H{sub 2}O){sub 4}{B(CN)_4}{sub 3}].EtOH (6) the tetracyanidoborate anions are all or in part bonded to the RE{sup 3+} ions, whereas in [Pr(H{sub 2}O){sub 9}][B(CN){sub 4}]{sub 3}.(CH{sub 3}){sub 2}CO (3), [Er(H{sub 2}O){sub 8}][B(CN){sub 4}]{sub 3}.(CH{sub 3}){sub 2}CO (4), and [Lu(EtOH)(H{sub 2}O){sub 7}][B(CN){sub 4}]{sub 3}.EtOH.0.5H{sub 2}O (5) the [B(CN){sub 4}]{sup -} anions are not coordinated to the central metal atoms. Only in 1, one of the three crystallographically independent [B(CN){sub 4}]{sup -} anions acts as a bridging ligand. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. DIFFUSIVITY OF ARRE EARTH ION IN POROUS ION EXCHANGE RESINS

    Institute of Scientific and Technical Information of China (English)

    LingDaren; LiuYucheng; 等

    1997-01-01

    The self-diffusion of Eu3+ ion in porous resins D72 and D751 was studied by isotope exchange reaction.Applying Kataoka's bidisperse pore model,the intraparticle effective diffusivity De were resolved into a solid diffusivity Dg and a macropore diffusivity Dp.The experiments show that De.Dp and Dg all increase with the increase of reaction temperature;the response Dp and Dg of D751 resin is smaller than that of D72 resin;the diffusivity of Eu3+ ion in solution is larger than Dp,which leads to the conclusion that the diffusion of ion in the pore of resin can not completely be equal to that in solution.

  7. Chitosan Hydrogel Structure Modulated by Metal Ions

    Science.gov (United States)

    Nie, Jingyi; Wang, Zhengke; Hu, Qiaoling

    2016-10-01

    As one of the most important polysaccharide, chitosan (CS) has generated a great deal of interest for its desirable properties and wide applications. In the utilization of CS materials, hydrogel is a major and vital branch. CS has the ability to coordinate with many metal ions by a chelation mechanism. While most researchers focused on the applications of complexes between CS and metal ions, the complexes can also influence gelation process and structure of CS hydrogel. In the present work, such influence was studied with different metal ions, revealing two different kinds of mechanisms. Strong affinity between CS and metal ions leads to structural transition from orientation to multi-layers, while weak affinity leads to composite gel with in-situ formed inorganic particles. The study gave a better understanding of the gelation mechanism and provided strategies for the modulation of hydrogel morphology, which benefited the design of new CS-based materials with hierarchical structure and facilitated the utilization of polysaccharide resources.

  8. A metal ion regulated artificial metalloenzyme

    NARCIS (Netherlands)

    Bersellini, Manuela; Roelfes, Gerard

    2017-01-01

    Regulation of enzyme activity is essential in living cells. The rapidly increasing number of designer enzymes with new-to-nature activities makes it necessary to develop novel strategies for controlling their catalytic activity. Here we present the development of a metal ion regulated artificial met

  9. Metal ion binding with carbon nanotubes and graphene: Effect of chirality and curvature

    Science.gov (United States)

    Umadevi, Deivasigamani; Sastry, G. Narahari

    2012-10-01

    First principles calculations have been used to comprehensively study the binding of a series alkali (Li+, Na+, K+) and alkaline earth (Be2+, Mg2+, Ca2+) metal ions with carbon nanotubes (CNTs) and graphene. It is interesting to note that the mono-cationic systems prefer binding to armchair CNTs over zigzag CNTs, while the preference for the di-cationic systems is exactly opposite. We have also observed significant changes in the HOMO-LUMO energy gap of the CNTs on metal ion binding and these results indicate that the fine tuning of energy gap of the CNTs can be effected through metal ion binding.

  10. Material Removes Heavy Metal Ions From Water

    Science.gov (United States)

    Philipp, Warren H., Jr.; Street, Kenneth W.; Hill, Carol; Savino, Joseph M.

    1995-01-01

    New high capacity ion-exchange polymer material removes toxic metal cations from contaminated water. Offers several advantages. High sensitivities for such heavy metals as lead, cadmium, and copper and capable of reducing concentrations in aqueous solutions to parts-per-billion range. Removes cations even when calcium present. Material made into variety of forms, such as thin films, coatings, pellets, and fibers. As result, adapted to many applications to purify contaminated water, usually hard wherever found, whether in wastewater-treatment systems, lakes, ponds, industrial plants, or homes. Another important feature that adsorbed metals easily reclaimed by either destructive or nondestructive process. Other tests show ion-exchange polymer made inexpensively; easy to use; strong, flexible, not easily torn; and chemically stable in storage, in aqueous solutions, and in acidic or basic solution.

  11. EFFECTS OF METAL IONS ON THE CONFORMATIONAL CHANGES OF DNA

    Institute of Scientific and Technical Information of China (English)

    G. Q. Liu; Y.Y. Meng; S.H. Liu; Y.H. Hu

    2005-01-01

    DNA takes on multi-different conformations such as A-, B-, C-, D- and Z-form. These conformations can transit to one another when DNA deposited in some metal ions solutions or when changing the concentrations of the same metal ions. Here, several major conformational transitions of DNA induced by metal ions under different environment were introduced and the mechanism of the interaction of metal ions with DNA was discuss in detail.

  12. Ion irradiation effects on metallic nanocrystals

    Science.gov (United States)

    Kluth, P.; Johannessen, B.; Giulian, R.; Schnohr, C. S.; Foran, G. J.; Cookson, D. J.; Byrne, A. P.; Ridgway, M. C.

    We have investigated structural and morphological properties of metallic nanocrystals (NCs) exposed to ion irradiation. NCs were characterized by transmission electron microscopy in combination with advanced synchrotron-based analytical techniques, in particular X-ray absorption spectroscopy and small-angle X-ray scattering. A number of different effects were observed depending on the irradiation conditions. At energies where nuclear stopping is predominant, structural disorder/amorphization followed by inverse Ostwald ripening/dissolution due to ion beam mixing was observed for Au and Cu NCs embedded in SiO2. The ion-irradiation-induced crystalline to amorphous transition in the NCs, which cannot be achieved in the corresponding bulk metals, was attributed to their initially higher structural energy as compared to bulk material and possibly preferential nucleation of the amorphous phase at the NC/SiO2 interface. At very high irradiation energies (swift heavy ion irradiation), where the energy loss is nearly entirely due to electronic stopping, a size-dependent shape transformation of the NCs from spheres to rod like shapes was apparent in Au NCs. Our preliminary results are in good agreement with considerations on melting of the NCs in the ion track as one mechanism involved in the shape transformation.

  13. Ohmic model for electrodeposition of metallic ions

    Energy Technology Data Exchange (ETDEWEB)

    Gliozzi, A.S. [Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 29, 10129 Torino (Italy); Alexe-Ionescu, A.L. [Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 29, 10129 Torino (Italy); Department of Physics, University Politehnica of Bucharest, Splaiul Independentei 313, 060042 Bucharest (Romania); Barbero, G., E-mail: giovanni.barbero@polito.it [Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 29, 10129 Torino (Italy)

    2015-10-23

    An ohmic model to describe the electrodeposition of metallic ions on the electrodes is proposed. We assume that the ionic distribution is homogeneous across the electrolytic cell, and that the ionic current is due to the bulk electric field. The nucleation in the electrodeposition is supposed to be well described by a kinetic equation at the electrode, taking into account the neutralization of metallic ions on the electrodes. Two cases are considered. In the first case the characteristic time describing the neutralization of the ions is supposed to be negligible with respect to the flight time of the ions across the cell. In this framework the bulk electric field coincides with the external electric field, and our analysis gives analytical formulae for the surface density of deposited ions and for the electric current in the external circuit. The case where the two characteristic times are comparable, and the effective electric field in the bulk depends on the surface deposition, is considered too. In this case the ordinary differential equations describing the ionic distribution and the adsorption phenomenon have to be solved numerically. The agreement between the presented model and the experimental results published by several groups is reasonably good.

  14. Engineering of microorganisms towards recovery of rare metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Kuroda, Kouichi; Ueda, Mitsuyoshi [Kyoto Univ. (Japan). Div. of Applied Life Sciences

    2010-06-15

    The bioadsorption of metal ions using microorganisms is an attractive technology for the recovery of rare metal ions as well as removal of toxic heavy metal ions from aqueous solution. In initial attempts, microorganisms with the ability to accumulate metal ions were isolated from nature and intracellular accumulation was enhanced by the overproduction of metal-binding proteins in the cytoplasm. As an alternative, the cell surface design of microorganisms by cell surface engineering is an emerging strategy for bioadsorption and recovery of metal ions. Cell surface engineering was firstly applied to the construction of a bioadsorbent to adsorb heavy metal ions for bioremediation. Cell surface adsorption of metal ions is rapid and reversible. Therefore, adsorbed metal ions can be easily recovered without cell breakage, and the bioadsorbent can be reused or regenerated. These advantages are suitable for the recovery of rare metal ions. Actually, the cell surface display of a molybdate-binding protein on yeast led to the enhanced adsorption of molybdate, one of the rare metal ions. An additional advantage is that the cell surface display system allows high-throughput screening of protein/peptide libraries owing to the direct evaluation of the displayed protein/peptide without purification and concentration. Therefore, the creation of novel metal-binding protein/ peptide and engineering of microorganisms towards the recovery of rare metal ions could be simultaneously achieved. (orig.)

  15. Selective extraction and recovery of rare earth metals from phosphor powders in waste fluorescent lamps using an ionic liquid system.

    Science.gov (United States)

    Yang, Fan; Kubota, Fukiko; Baba, Yuzo; Kamiya, Noriho; Goto, Masahiro

    2013-06-15

    The recycling of rare earth metals from phosphor powders in waste fluorescent lamps by solvent extraction using ionic liquids was studied. Acid leaching of rare earth metals from the waste phosphor powder was examined first. Yttrium (Y) and europium (Eu) dissolved readily in the acid solution; however, the leaching of other rare earth metals required substantial energy input. Ionization of target rare earth metals from the waste phosphor powders into the leach solution was critical for their successful recovery. As a high temperature was required for the complete leaching of all rare earth metals, ionic liquids, for which vapor pressure is negligible, were used as an alternative extracting phase to the conventional organic diluent. An extractant, N, N-dioctyldiglycol amic acid (DODGAA), which was recently developed, showed a high affinity for rare earth metal ions in liquid-liquid extraction although a conventional commercial phosphonic extractant did not. An effective recovery of the rare earth metals, Y, Eu, La and Ce, from the metal impurities, Fe, Al and Zn, was achieved from the acidic leach solution of phosphor powders using an ionic liquid containing DODGAA as novel extractant system.

  16. Fluorescence enhancement of photoswitchable metal ion sensors

    Science.gov (United States)

    Sylvia, Georgina; Heng, Sabrina; Abell, Andrew D.

    2016-12-01

    Spiropyran-based fluorescence sensors are an ideal target for intracellular metal ion sensing, due to their biocompatibility, red emission frequency and photo-controlled reversible analyte binding for continuous signal monitoring. However, increasing the brightness of spiropyran-based sensors would extend their sensing capability for live-cell imaging. In this work we look to enhance the fluorescence of spiropyran-based sensors, by incorporating an additional fluorophore into the sensor design. We report a 5-membered monoazacrown bearing spiropyran with metal ion specificity, modified to incorporate the pyrene fluorophore. The effect of N-indole pyrene modification on the behavior of the spiropyran molecule is explored, with absorbance and fluorescence emission characterization. This first generation sensor provides an insight into fluorescence-enhancement of spiropyran molecules.

  17. Effects of metal ion adduction on the gas-phase conformations of protein ions.

    Science.gov (United States)

    Flick, Tawnya G; Merenbloom, Samuel I; Williams, Evan R

    2013-11-01

    Changes in protein ion conformation as a result of nonspecific adduction of metal ions to the protein during electrospray ionization (ESI) from aqueous solutions were investigated using traveling wave ion mobility spectrometry (TWIMS). For all proteins examined, protein cations (and in most cases anions) with nonspecific metal ion adducts are more compact than the fully protonated (or deprotonated) ions with the same charge state. Compaction of protein cations upon nonspecific metal ion binding is most significant for intermediate charge state ions, and there is a greater reduction in collisional cross section with increasing number of metal ion adducts and increasing ion valency, consistent with an electrostatic interaction between the ions and the protein. Protein cations with the greatest number of adducted metal ions are no more compact than the lowest protonated ions formed from aqueous solutions. These results show that smaller collisional cross sections for metal-attached protein ions are not a good indicator of a specific metal-protein interaction in solution because nonspecific metal ion adduction also results in smaller gaseous protein cation cross sections. In contrast, the collisional cross section of α-lactalbumin, which specifically binds one Ca(2+), is larger for the holo-form compared with the apo-form, in agreement with solution-phase measurements. Because compaction of protein cations occurs when metal ion adduction is nonspecific, elongation of a protein cation may be a more reliable indicator that a specific metal ion-protein interaction occurs in solution.

  18. Liquid metal ion source analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, P.

    1986-06-14

    An analysis system for angular and mass resolved energy distribution measurements of liquid metal ion source beams has been constructed. The energy analyser has been calibrated, and preliminary on-axis energy distribution measurements of a gallium source operating between 0.26 and 30.0 ..mu..A have been made. These results closely agree with measurements reported by other workers, confirming the unusual FWHM behaviour of gallium sources below approx. 2 ..mu..A.

  19. Metal hydrides for lithium-ion batteries.

    Science.gov (United States)

    Oumellal, Y; Rougier, A; Nazri, G A; Tarascon, J-M; Aymard, L

    2008-11-01

    Classical electrodes for Li-ion technology operate via an insertion/de-insertion process. Recently, conversion electrodes have shown the capability of greater capacity, but have so far suffered from a marked hysteresis in voltage between charge and discharge, leading to poor energy efficiency and voltages. Here, we present the electrochemical reactivity of MgH(2) with Li that constitutes the first use of a metal-hydride electrode for Li-ion batteries. The MgH(2) electrode shows a large, reversible capacity of 1,480 mAh g(-1) at an average voltage of 0.5 V versus Li(+)/Li(o) which is suitable for the negative electrode. In addition, it shows the lowest polarization for conversion electrodes. The electrochemical reaction results in formation of a composite containing Mg embedded in a LiH matrix, which on charging converts back to MgH(2). Furthermore, the reaction is not specific to MgH(2), as other metal or intermetallic hydrides show similar reactivity towards Li. Equally promising, the reaction produces nanosized Mg and MgH(2), which show enhanced hydrogen sorption/desorption kinetics. We hope that such findings can pave the way for designing nanoscale active metal elements with applications in hydrogen storage and lithium-ion batteries.

  20. Origins of energetic ions in the Earth's magnetosheath

    Science.gov (United States)

    1994-01-01

    This final report describes activities under NASA contract NAS5-31213 to Lockheed Missiles and Space Company. The report covers the entire contract period from 8 May 1991 to 7 Jun. 1994. This is a contract under the NASA Guest Investigator Program for the analysis and interpretation of the combined scientific data from the Hot Plasma Composition Experiment (HPCE) and the Charge Energy Mass (CHEM) spectrometer on the AMPTE/Charge Composition Explorer (CCE) spacecraft. These combined data sets have been used to survey the energetic ion environment in the earth's magnetosheath to determine the origins and relative strengths of the energetic ion populations found there.

  1. Origins of energetic ions in the Earth's magnetosheath

    Science.gov (United States)

    1994-06-01

    This final report describes activities under NASA contract NAS5-31213 to Lockheed Missiles and Space Company. The report covers the entire contract period from 8 May 1991 to 7 Jun. 1994. This is a contract under the NASA Guest Investigator Program for the analysis and interpretation of the combined scientific data from the Hot Plasma Composition Experiment (HPCE) and the Charge Energy Mass (CHEM) spectrometer on the AMPTE/Charge Composition Explorer (CCE) spacecraft. These combined data sets have been used to survey the energetic ion environment in the earth's magnetosheath to determine the origins and relative strengths of the energetic ion populations found there.

  2. New Ion-Nucleation Mechanism Relevant for the Earth's Atmosphere

    DEFF Research Database (Denmark)

    Enghoff, Martin Andreas Bødker; Svensmark, Henrik; Pedersen, Jens Olaf Pepke

    An experiment has been set up in order to investigate the role of ionization in Earth's climate. We have chosen to start our investigation at the smallest scales, namely by studying the effect of cosmic ray produced ions on atmospheric aerosol nucleation and growth processes. This experiment...... is conducted at the Danish National Space Center, Center for Sun-Climate Research. It comprises a 7 m3 reaction chamber where atmospheric conditions can be simulated. The number of ions can be increased by exposure to radioactive sources and decreased by applying an electric field; this will enable experiments...

  3. Method for treating rare earth-transition metal scrap

    Science.gov (United States)

    Schmidt, Frederick A.; Peterson, David T.; Wheelock, John T.; Jones, Lawrence L.

    1992-12-29

    Rare earth-transition metal (e.g., iron) scrap (e.g., Nd-Fe-B scrap) is flux (slag) remelted to reduce tramp non-metallic impurities, such as oxygen and nitrogen, and metallic impurities, such as Li, Na, Al, etc., picked up by the scrap from previous fabrication operations. The tramp impurities are reduced to concentrations acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. The scrap is electroslag or inductoslag melted using a prefused, rare earth fluoride-bearing flux of CaF.sub.2, CaCl.sub.2 or mixtures thereof or the slag resulting from practice of the thermite reduction process to make a rare earth-iron alloy.

  4. Liquid metal ion source assembly for external ion injection into an electron string ion source (ESIS)

    Energy Technology Data Exchange (ETDEWEB)

    Segal, M. J., E-mail: mattiti@gmail.com [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); University of Cape Town, Rondebosch, Cape Town 7700 (South Africa); Bark, R. A.; Thomae, R. [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); Donets, E. E.; Donets, E. D.; Boytsov, A.; Ponkin, D.; Ramsdorf, A. [Joint Institute for Nuclear Research, Joloit-Curie 6, 141980 Dubna, Moscow Region (Russian Federation)

    2016-02-15

    An assembly for a commercial Ga{sup +} liquid metal ion source in combination with an ion transportation and focusing system, a pulse high-voltage quadrupole deflector, and a beam diagnostics system has been constructed in the framework of the iThemba LABS (Cape Town, South Africa)—JINR (Dubna, Russia) collaboration. First, results on Ga{sup +} ion beam commissioning will be presented. Outlook of further experiments for measurements of charge breeding efficiency in the electron string ion source with the use of external injection of Ga{sup +} and Au{sup +} ion beams will be reported as well.

  5. Coherent optical ultrasound detection with rare-earth ion dopants

    CERN Document Server

    Tay, Jian Wei; Longdell, Jevon

    2010-01-01

    We describe theoretical and experimental demonstration for optical detection of ultrasound using a spectral hole engraved in cryogenically cooled rare-earth ion doped solids. Our method utilizes the dispersion effects due to the spectral hole to perform phase to amplitude modulation conversion. Like previous approaches using spectral holes it has the advantage of detection with large \\'etendue. The method also has the benefit that high sensitivity can be obtained with moderate absorption contrast for the spectral holes.

  6. Rare-earth ions doped transparent oxyfluoride glass-ceramics

    OpenAIRE

    2010-01-01

    In recent years, rare-earth ions doped transparent oxyfluoride glass-ceramics have attracted great attentions for their low phonon energy environments of fluoride nanocrystals and high chemical and mechanical stabilities of oxide glassy matrix. In this chapter, firstly, the crystallization behaviors of the transparent glassceramics containing CaF2 nanocrystals are presented to demonstrate the controllable microstructure evolution of nano-composites. Secondly, the optical properties of the new...

  7. Large gem diamonds from metallic liquid in Earth's deep mantle.

    Science.gov (United States)

    Smith, Evan M; Shirey, Steven B; Nestola, Fabrizio; Bullock, Emma S; Wang, Jianhua; Richardson, Stephen H; Wang, Wuyi

    2016-12-16

    The redox state of Earth's convecting mantle, masked by the lithospheric plates and basaltic magmatism of plate tectonics, is a key unknown in the evolutionary history of our planet. Here we report that large, exceptional gem diamonds like the Cullinan, Constellation, and Koh-i-Noor carry direct evidence of crystallization from a redox-sensitive metallic liquid phase in the deep mantle. These sublithospheric diamonds contain inclusions of solidified iron-nickel-carbon-sulfur melt, accompanied by a thin fluid layer of methane ± hydrogen, and sometimes majoritic garnet or former calcium silicate perovskite. The metal-dominated mineral assemblages and reduced volatiles in large gem diamonds indicate formation under metal-saturated conditions. We verify previous predictions that Earth has highly reducing deep mantle regions capable of precipitating a metallic iron phase that contains dissolved carbon and hydrogen.

  8. Rational Design of Metal Ion Sequestering Agents

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, Kenneth N.

    2000-09-30

    The discriminate bonding of metal ions is a challenge to the synthetic chemist and a phenomenon of considerable practical importance.1 An important feature of many technical applications is the specific or preferential binding of a single metal ion in the presence of many metals. Examples range from large-volume uses (e.g. ferric EDTA as a plant food, calcium complexing agents as water softeners or anticaking formulations) to very high technology applications (technetium complexation in radiopharmaceuticals, synthetic metalloenzymes). We are interested in efficient and discriminate binding of actinides for waste stream remediation. Actinides represent a major and long-lived contaminant in nuclear waste. While the separation of actinides from other radioactive components of waste, such as Sr and Cs, is relatively well established, the separation of actinides from each other and in complex solutions (e.g. those found in tank wastes) is not as well resolved. The challenge of designing metal-specific (actinide) ligands is facilitated by examples from nature. Bacteria synthesize Fe(III)-specific ligands, called siderophores, to sequester Fe(III) from the environment and return it to the cell. The similarities between Fe(III) and Pu(IV) (their charge-to-size ratios and acidity), make the siderophores prototypical for designing actinide-specific ligands. The chelating groups present in siderophores are usually hydroxamic acids and catecholamides. We have developed derivatives of these natural products which have improved properties. The catechol derivatives are the 2,3-dihydroxyterephthalamides (TAMs), and 3,4-dihydroxysulfonamides (SFAMs), and the hydroxamic acid derivatives are three isomers of hydroxypyridinones, 1,2- HOPO, 3,2-HOPO, and 3,4-HOPO. All of these ligands are attached to molecular backbones by amides and a very important feature of HOPO and CAM ligands is a strong hydrogen bonds formed between the amide proton and the adjacent phenolic oxygen in the metal

  9. Cyclic peptides-assisted trans- port of metal ions across liquid-organic membrane

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The formation of alkali and alkaline-earth metal picrate complexes with cyclo(Pro-Gly)n ionophores (1, n = 3; 2, n = 4) can facilitate the migration of metal ions across a bulk liquid CH2Cl2 membrane. The migration behavior was studied by measuring the solution absorption at 356 nm, using a UV/Vis spectrophotometer, and the rates can be determined by comparing the initial absorption of donor solutions with the absorption of the corresponding receiver solutions as the function of time. It was found that cyclic peptide 1 shows higher transport activity for the studied alkali and alkaline-earth metal ions than compound 2, which is related to the backbone flexibility of the cyclic peptides. The findings in this work suggest that the rate of ionophore-facilitated ion transport depends not only on the ability of complex forma-tion in aqueous phase, but also on the ability of complex dissociation in organic phase.

  10. Laser materials based on transition metal ions

    Science.gov (United States)

    Moncorgé, Richard

    2017-01-01

    The purpose of this presentation is to review the spectroscopic properties of the main laser materials based on transition metal ions which lead to noticeable laser performance at room temperature and, for very few cases, because of unique properties, when they are operated at cryogenic temperatures. The description also includes the materials which are currently being used as saturable absorbers for passive-Q-switching of a variety of other near- and mid-infrared solid state lasers. A substantial part of the article is devoted first to the description of the energy levels and of the absorption and emission transitions of the transition metal ions in various types of environments by using the well-known Tanabe-Sugano diagrams. It is shown in particular how these diagrams can be used along with other theoretical considerations to understand and describe the spectroscopic properties of ions sitting in crystal field environments of near-octahedral or near-tetrahedral symmetry. The second part is then dedicated to the description (positions and intensities) of the main absorption and emission features which characterize the different types of materials.

  11. The Progress of TiO Nanocrystals Doped with Rare Earth Ions

    Directory of Open Access Journals (Sweden)

    Hai Liu

    2012-01-01

    Full Text Available In the past decades, TiO2 nanocrystals (NCs have been widely studied in the fields of photoelectric devices, optical communication, and environment for their stability in aqueous solution, being nontoxic, cheapness, and so on. Among the three crystalline phases of TiO2, anatase TiO2 NCs are the best crystallized phase of solar energy conversion. However, the disadvantages of high band gap energy (3.2 ev and the long lifetime of photogenerated electrons and holes limit its photocatalytic activity severely. Therefore, TiO2 NCs doped with metal ions is available way to inhibit the transformation from anatase to rutile. Besides, these metal ions will concentrate on the surface of TiO2 NCs. All above can enhance the photoactivity of TiO2 NCs. In this paper, we mainly outlined the different characterization brought about in the aspect of nanooptics and photocatalytics due to metal ions added in. Also, the paper mainly concentrated on the progress of TiO2 NCs doped with rare earth (RE ions.

  12. High-temperature corrosion of metals in the salt and metallic melts containing rare earths

    Science.gov (United States)

    Karpov, V. V.; Abramov, A. V.; Zhilyakov, A. Yu.; Belikov, S. V.; Volkovich, V. A.; Polovov, I. B.; Rebrin, O. I.

    2016-09-01

    A complex of independent methods was employed to study the corrosion resistance of molybdenum, zirconium, tantalum and tungsten in chloride, chloride-fluoride and fluoride-oxide melts based on LiCl, CaCl2, NaCl- KCl, LiF, and containing rare earths. Tests were conducted for 30 h at 750-1050 °C. The metals showed excellent corrosion resistance in fused chlorides (the corrosion rates were below 0.0005 g/(m2 h). Despite the presence of chemically active fluoride ions in the chloride-fluoride melts, the metals studied also showed very low corrosion rates, except molybdenum, for which the rate of corrosion was 0,8 g/(m2 h). The corrosion resistance of tantalum was considerably reduced in the fluoride-oxide melts; the corrosion rate was over 1 g/(m2 h) corresponding to the 8-th grade of stability and placing tantalum to the group of "low stability" materials.

  13. Electrons and Spin Waves in Heavy Rare Earth Metals

    DEFF Research Database (Denmark)

    Mackintosh, A. R.

    1972-01-01

    Although the main principles governing the magnetic interactions and magnetic ordering in rare earth metals have been qualitatively understood for some time, it is only relatively recently that a sufficiently detailed study has been made of their electronic and magnetic excitations to place this ...

  14. Systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Cooks, Robert Graham; Li, Anyin; Luo, Qingjie

    2017-08-01

    The invention generally relates to systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions. In certain aspects, the invention provides methods that involve providing a metal and a solvent. The methods additionally involve applying voltage to the solvated metal to thereby produce solvent droplets including ions of the metal containing compound, and directing the solvent droplets including the metal ions to a target. In certain embodiments, once at the target, the metal ions can react directly or catalyze reactions.

  15. Systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Cooks, Robert Graham; Li, Anyin; Luo, Qingjie

    2017-01-24

    The invention generally relates to systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions. In certain aspects, the invention provides methods that involve providing a metal and a solvent. The methods additionally involve applying voltage to the solvated metal to thereby produce solvent droplets including ions of the metal containing compound, and directing the solvent droplets including the metal ions to a target. In certain embodiments, once at the target, the metal ions can react directly or catalyze reactions.

  16. Metal-ion rescue revisited: biochemical detection of site-bound metal ions important for RNA folding.

    Science.gov (United States)

    Frederiksen, John K; Li, Nan-Sheng; Das, Rhiju; Herschlag, Daniel; Piccirilli, Joseph A

    2012-06-01

    Within the three-dimensional architectures of RNA molecules, divalent metal ions populate specific locations, shedding their water molecules to form chelates. These interactions help the RNA adopt and maintain specific conformations and frequently make essential contributions to function. Defining the locations of these site-bound metal ions remains challenging despite the growing database of RNA structures. Metal-ion rescue experiments have provided a powerful approach to identify and distinguish catalytic metal ions within RNA active sites, but the ability of such experiments to identify metal ions that contribute to tertiary structure acquisition and structural stability is less developed and has been challenged. Herein, we use the well-defined P4-P6 RNA domain of the Tetrahymena group I intron to reevaluate prior evidence against the discriminatory power of metal-ion rescue experiments and to advance thermodynamic descriptions necessary for interpreting these experiments. The approach successfully identifies ligands within the RNA that occupy the inner coordination sphere of divalent metal ions and distinguishes them from ligands that occupy the outer coordination sphere. Our results underscore the importance of obtaining complete folding isotherms and establishing and evaluating thermodynamic models in order to draw conclusions from metal-ion rescue experiments. These results establish metal-ion rescue as a rigorous tool for identifying and dissecting energetically important metal-ion interactions in RNAs that are noncatalytic but critical for RNA tertiary structure.

  17. Behavior of metal ions in bioelectrochemical systems: A review

    Science.gov (United States)

    Lu, Zhihao; Chang, Dingming; Ma, Jingxing; Huang, Guangtuan; Cai, Lankun; Zhang, Lehua

    2015-02-01

    Bioelectrochemical systems (BESs) have been focused on by many researchers to treat wastewater and recover energy or valuable chemicals from wastes. In BESs, metal ions play an important role in the conductivity of solution, reactors' internal resistance, power generation, chemical production and activity of microorganisms. Additionally, the metal ions are also involved in anodic or cathodic reaction processes directly or indirectly in BESs. This paper reviews the behavior of metal ions in BESs, including (1) increase of the conductivity of electrolyte and decrease of internal resistance, (2) transfer for desalination, (3) enhancement or inhibition of the biocatalysis in anode, (4) improvement of cathodic performance by metal ions through electron acceptance or catalysis in cathodic process and (5) behavior of metal ions on membranes. Moreover, the perspectives of BESs removing heavy metal ions in wastewater or solid waste are discussed to realize recovery, reduction and detoxification simultaneously.

  18. Experiments and Researches on Production of Highly Charged Metallic Ions

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    To satisfy the requirements of HIRFL (Heavy Ion Research Facility in Lanzhou), series of experiments have been done to produce metallic ion beams on the 14.5 GHz ECR ion source. By now, numerous methods have been tested, in which oven heating and MIVOC (Metallic Ion from Volatile Compounds) are both included.According to the experiments, the results show that oven heating is much better than MIVOC. In most of our

  19. Effects of metal ions on recombinant calcineurin A subunit

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Effects of metal ions on activities and solution conformations of calcineurin A subunit have been examined.The ability of several metal ions to activate calcineurin A has been tested with Ni2+>Mn2+>Mg2+/Ca2+.The corresponding CD spectra and intrinsic fluorescent emission spectra show that calcineurin A exists in different metal ion-dependent conformation states.Effects of the different concentritions of Ni2+ on activities and solution conformations of calcineurin A have been tested too.Results indicate that effects of these metal ions to activate calcineurin are due to their conformational changes.

  20. Plasma immersion ion implantation for reducing metal ion release

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, C.; Garcia, J. A.; Maendl, S.; Pereiro, R.; Fernandez, B.; Rodriguez, R. J. [Centro de Ingenieria Avanzada de Superficies AIN, 31191, Cordovilla-Pamplona (Spain); Leibniz-Institut fuer Oberflaechenmodifizierung, 04318 Leipzig (Germany); Universidad de Oviedo, Departamento Quimica Fisica y Analitica (Spain); Centro de Ingenieria Avanzada de Superficies AIN, 31191, Cordovilla-Pamplona (Spain)

    2012-11-06

    Plasma immersion ion implantation of Nitrogen and Oxygen on CoCrMo alloys was carried out to improve the tribological and corrosion behaviors of these biomedical alloys. In order to optimize the implantation results we were carried experiments at different temperatures. Tribocorrosion tests in bovine serum were used to measure Co, Cr and Mo releasing by using Inductively Coupled Plasma Mass Spectrometry analysis after tests. Also, X-ray Diffraction analysis were employed in order to explain any obtained difference in wear rate and corrosion tests. Wear tests reveals important decreases in rate of more than one order of magnitude for the best treatment. Moreover decreases in metal release were found for all the implanted samples, preserving the same corrosion resistance of the unimplanted samples. Finally this paper gathers an analysis, in terms of implantation parameters and achieved properties for industrial implementation of these treatments.

  1. Chemoselective single-site Earth-abundant metal catalysts at metal-organic framework nodes

    Science.gov (United States)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin

    2016-08-01

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal-organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C-H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  2. Conformational thermodynamics of metal-ion binding to a protein

    Science.gov (United States)

    Das, Amit; Chakrabarti, J.; Ghosh, Mahua

    2013-08-01

    Conformational changes in proteins induced by metal-ions play extremely important role in various cellular processes and technological applications. Dihedral angles are suitable conformational variables to describe microscopic conformations of a biomacromolecule. Here, we use the histograms of the dihedral angles to study the thermodynamics of conformational changes of a protein upon metal-ion binding. Our method applied to Ca2+ ion binding to an important metalloprotein, Calmodulin, reveals different thermodynamic changes in different metal-binding sites. The ligands coordinating to Ca2+ ions also play different roles in stabilizing the metal-ion coordinated protein-structure. Metal-ion binding induce remarkable thermodynamic changes in distant part of the protein via modification of secondary structural elements.

  3. Binding and selectivity of phenazino-18-crown-6-ether with alkali, alkaline earth and toxic metal species: A DFT study

    Science.gov (United States)

    Islam, Nasarul; Chimni, Swapandeep Singh

    2017-02-01

    The interactions of phenazino-crown ether ligands with alkali, alkaline earth and selected toxic species were investigated using density functional theory modelling by employing B3PW91/6-311G ++ (d, p) level of theory. The complex stability was analysed in terms of binding energies, perturbation energies, position of highest molecular orbital and energy gap values. In general, the complexes formed by P18C6-1a ligand with metal cations were found to be more stable than those with P18C6-1b. Among alkali and alkaline earth metals complexes having highest stability was observed for the complex formed by P18C6-1a with Be2+. Computational calculations of P18C6 ligand with toxic metal ions reveals that the P18C6-Cr6+ metal complexes acquire envelop like geometry, leading to higher binding energy values. Comparing the binding energies of neutral and monocations of Ag and Hg, the former had higher value both in neutral as well as monocation state. Thus, the stability of metal complexes is determined not only by the ligand but also by the type of metal ion. In solvent systems the stability constants of metal complexes were found increasing with decreasing permittivity of the solvent. This reflects the inherited polar character of the protic solvents stabilises the cation, resulting in decrease of effective interaction of ligand with the metal ion.

  4. Electronic Structure of Rare-Earth Metals. II. Positron Annihilation

    DEFF Research Database (Denmark)

    Williams, R. W.; Mackintosh, Allan

    1968-01-01

    The angular correlation of the photons emitted when positrons annihilate with electrons has been studied in single crystals of the rare-earth metals Y, Gd, Tb, Dy, Ho, and Er, and in a single crystal of an equiatomic alloy of Ho and Er. A comparison of the results for Y with the calculations...... of Loucks shows that the independent-particle model gives a good first approximation to the angular distribution, although correlation effects probably smear out some of the structure. The angular distributions from the heavy rare-earth metals are very similar to that from Y and can be understood...... qualitatively in terms of the relativistic augmented-plane-wave calculations by Keeton and Loucks. The angular distributions in the c direction in the paramagnetic phases are characterized by a rapid drop at low angles followed by a hump, and these features are associated with rather flat regions of Fermi...

  5. Isotopic fractionation of alkali earth metals during carbonate precipitation

    Science.gov (United States)

    Yotsuya, T.; Ohno, T.; Muramatsu, Y.; Shimoda, G.; Goto, K. T.

    2014-12-01

    The alkaline earth metals such as magnesium, calcium and strontium play an important role in a variety of geochemical and biological processes. The element ratios (Mg/Ca and Sr/Ca) in marine carbonates have been used as proxies for reconstruction of the past environment. Recently several studies suggested that the study for the isotopic fractionation of the alkaline earth metals in marine carbonates has a potentially significant influence in geochemical research fields (e.g. Eisenhauer et al., 2009). The aim of this study is to explore the influence of carbonate polymorphs (Calcite and Aragonite) and environmental factors (e.g., temperature, precipitation rate) on the level of isotopic fractionation of the alkaline earth metals. We also examined possible correlations between the level of isotopic fractionation of Ca and that of other alkaline earth metals during carbonate precipitation. In order to determine the isotope fractionation factor of Mg, Ca and Sr during carbonate precipitation, calcite and aragonite were synthesized from calcium bicarbonate solution in which the amount of magnesium was controlled based on Kitano method. Calcium carbonates were also prepared from the mixture of calcium chlorite and sodium hydrogen carbonate solutions. The isotope fractionation factors were measured by MC-ICPMS. Results suggested that the level of isotopic fractionation of Mg during carbonate precipitation was correlated with that of Sr and that the change of the carbonate crystal structure could make differences of isotopic fractionations of Mg and Ca, however no difference was found in the case of Sr. In this presentation, the possible mechanism will be discussed.

  6. Growth of oriented rare-earth-transition-metal thin films

    Energy Technology Data Exchange (ETDEWEB)

    Fullerton, E.E.; Sowers, C.H.; Bader, S.D. [Argonne National Lab., IL (United States); Wu, X.Z. [Argonne National Lab., IL (United States)]|[Northern Illinois Univ., DeKalb, IL (United States)

    1996-04-01

    Rare-earth-transition-metal thin films are successfully grown by magnetron sputtering onto single-crystal MgO substrates with epitaxial W buffer layers. The use of epitaxial W buffer layers allows oriented single-phase films to be grown. Sm-Co films grown onto W(100), have strong in-plane anisotropy and coercivities exceeding 5 T at 5 K whereas Fe-Sm films have strong perpendicular anisotropy and are magnetically soft.

  7. 9-Benzylidene-9H-fluorene Derivatives Linked to Monoaza- 15-crown-5: Synthesis and Metal Ion Sensing

    Institute of Scientific and Technical Information of China (English)

    曹靖; 李阳; 冯俊香

    2012-01-01

    Two kinds of novel styryl chemosensory 2-FMNC and 3-FMNC, were designed and synthesized by an apporiate introduction of 9-benzylidene-9H-fluorene group as fluorophore with the aim at avoiding photoisomerisation. These 9-benzylidene-9H-fluorene derivatives showed the similar selectivity and sensitivity upon addition of metal ions. The sensitivity of FMNC to alkaline earth metal ions was Ba2+〉 Sr2+〉Ca2+≈Mg2+.

  8. In vitro cytotoxicity of metallic ions released from dental alloys

    NARCIS (Netherlands)

    Milheiro, A.; Nozaki, K.; Kleverlaan, C.J.; Muris, J.; Miura, H.; Feilzer, A.J.

    2016-01-01

    The cytotoxicity of a dental alloy depends on, but is not limited to, the extent of its corrosion behavior. Individual ions may have effects on cell viability that are different from metals interacting within the alloy structure. We aimed to investigate the cytotoxicity of individual metal ions in c

  9. Metal ion binding to peptides: Oxygen or nitrogen sites?

    NARCIS (Netherlands)

    Dunbar, R. C.; Polfer, N. C.; G. Berden,; Oomens, J.

    2012-01-01

    Infrared multiple-photon dissociation (IRMPD) spectroscopy was used to probe the conformations of gas-phase metal-ion complexes between a series of five metal ions and six small peptide ligands. This report is presented in recognition and tribute for the Armentrout group's long and hugely produ

  10. Metal ion binding to peptides: oxygen or nitrogen sites?

    NARCIS (Netherlands)

    R.C. Dunbar; N.C. Polfer; G. Berden; J. Oomens

    2012-01-01

    Infrared multiple-photon dissociation (IRMPD) spectroscopy was used to probe the conformations of gas-phase metal-ion complexes between a series of five metal ions and six small peptide ligands. This report is presented in recognition and tribute for the Armentrout group's long and hugely productive

  11. In vitro cytotoxicity of metallic ions released from dental alloys

    NARCIS (Netherlands)

    Milheiro, A.; Nozaki, K.; Kleverlaan, C.J.; Muris, J.; Miura, H.; Feilzer, A.J.

    2016-01-01

    The cytotoxicity of a dental alloy depends on, but is not limited to, the extent of its corrosion behavior. Individual ions may have effects on cell viability that are different from metals interacting within the alloy structure. We aimed to investigate the cytotoxicity of individual metal ions in

  12. Influence of alkaline earth metals on molecular structure of 3-nitrobenzoic acid in comparison with alkali metals effect.

    Science.gov (United States)

    Samsonowicz, M; Regulska, E; Lewandowski, W

    2011-11-01

    The influence of beryllium, magnesium, calcium, strontium and barium cations on the electronic system of 3-nitrobenzoic acid was studied in comparison with studied earlier alkali metal ions. The vibrational FT-IR (in KBr and ATR techniques) and (1)H and (13)C NMR spectra were recorded for 3-nitrobenzoic acid and its salts. Characteristic shifts in IR and NMR spectra along 3-nitrobenzoates of divalent metal series Mg→Ba were compared with series of univalent metal Li→Cs salts. Good correlations between the wavenumbers of the vibrational bands in the IR spectra for 3-nitrobenzoates and ionic potential, electronegativity, inverse of atomic mass, atomic radius and ionization energy of metals were found for alkaline earth metals as well as for alkali metals. The density functional (DFT) hybrid method B3LYP with two basis sets: 6-311++G** and LANL2DZ were used to calculate optimized geometrical structures of studied compounds. The theoretical wavenumbers and intensities of IR spectra as well as chemical shifts in NMR spectra were obtained. Geometric aromaticity indices, atomic charges, dipole moments and energies were also calculated. The calculated parameters were compared to experimental characteristic of studied compounds.

  13. The Transport of Solar Ions Through the Earth's Magnetosphere

    Science.gov (United States)

    Lennartsson, O. W.

    1999-01-01

    This report covers the initial phase of an investigation that was originally selected by NASA Headquarters for funding by a grant but was later transferred to NASA GSFC for continued funding under a new and separate contract. The principal objective of the investigation, led by Dr. O.W. Lennartsson, is to extract information about the solar origin plasma in Earth's magnetosphere, specifically about the entry and transport of this plasma, using energetic (10 eV/e to 18 keV/e) ion composition data from the Lockheed Plasma Composition Experiment on the NASA/ESA International Sun-Earth Explorer One (ISEE 1) satellite. These data were acquired many years ago, from November 1977 through March of 1982, but, because of subsequent failures of similar experiments on several other spacecraft, they are still the only substantial ion composition data available from Earth's magnetotail, beyond 10 R(sub E), in the critically important sub-kev to keV energy range. All of the Lockheed data now exist in a compacted scientific format, suitable for large-scale statistical investigations, which has been archived both at Lockheed Martin in Palo Alto and at the National Space Science Data Center (NSSDC) in Greenbelt. The completion of the archiving, by processing the remaining half of the data, was made possible by separate funding through a temporary NASA program for data restoration and was given priority over the data analysis by a no-cost extension of the subject grant. By chance, the period of performance coincided with an international study of source and loss processes of magnetospheric plasma, sponsored by the International Space Science Institute (ISSI) in Bern, Switzerland, for which Dr. Lennartsson was invited to serve as one of 12 co-chairs. This study meshed well with the continued analysis of the NASA/Lockheed ISEE ion composition data and provided a natural forum for a broader discussion of the results from this unique experiment. What follows is arranged, for the most

  14. The Transport of Solar Ions Through the Earth's Magnetosphere

    Science.gov (United States)

    Lennartsson, O. W.

    1999-01-01

    This report covers the initial phase of an investigation that was originally selected by NASA Headquarters for funding by a grant but was later transferred to NASA GSFC for continued funding under a new and separate contract. The principal objective of the investigation, led by Dr. O.W. Lennartsson, is to extract information about the solar origin plasma in Earth's magnetosphere, specifically about the entry and transport of this plasma, using energetic (10 eV/e to 18 keV/e) ion composition data from the Lockheed Plasma Composition Experiment on the NASA/ESA International Sun-Earth Explorer One (ISEE 1) satellite. These data were acquired many years ago, from November 1977 through March of 1982, but, because of subsequent failures of similar experiments on several other spacecraft, they are still the only substantial ion composition data available from Earth's magnetotail, beyond 10 RE, in the critically important sub-kev to keV energy range. All of the Lockheed data now exist in a compacted scientific format, suitable for large-scale statistical investigations, which has been archived both at Lockheed Martin in Palo Alto and at the National Space Science Data Center (NSSDC) in Greenbelt. The completion of the archiving, by processing the remaining half of the data, was made possible by separate funding through a temporary NASA program for data restoration and was given priority over the data analysis by a no-cost extension of the subject grant. By chance, the period of performance coincided with an international study of source and loss processes of magnetospheric plasma, sponsored by the International Space Science Institute (ISSI) in Bern, Switzerland, for which Dr. Lennartsson was invited to serve as one of 12 co-chairs. This study meshed well with the continued analysis of the NASA/Lockheed ISEE ion composition data and provided a natural forum for a broader discussion of the results from this unique experiment. What follows is arranged, for the most part, in

  15. Understanding the influence of nanoenvironment on luminescence of rare-earth ions

    Indian Academy of Sciences (India)

    Pushpal Ghosh; Amitava Patra

    2005-11-01

    This paper presents an overview of the recent results on upconversion and photoluminescence of rare-earth ions in nanoenvironments. The role of the rare-earth ion concentration, crystal size and crystal phase on the up- and downconversion emission of rare-earth ions in oxide nanocrystals and their underlying mechanisms are discussed. It is also found that the luminescence lifetime of the excited state rare-earth ions is sensitive to the particle crystalline phase and size. The analysis suggests that the modifications of radiative and nonradiative relaxation mechanisms are due to local symmetry structure of the host lattice and crystal size respectively.

  16. Analysis of metal ion release from biomedical implants

    Directory of Open Access Journals (Sweden)

    Ivana Dimić

    2013-06-01

    Full Text Available Metallic biomaterials are commonly used for fixation or replacement of damaged bones in the human body due to their good combination of mechanical properties. The disadvantage of metals as implant materials is their susceptibility to corrosion and metal ion release, which can cause serious health problems. In certain concentrations metals and metal ions are toxic and their presence can cause diverse inflammatory reactions, genetic mutations or even cancer. In this paper, different approaches to metal ion release examination, from biometallic materials sample preparation to research results interpretation, will be presented. An overview of the analytical techniques, used for determination of the type and concentration of released ions from implants in simulated biofluids, is also given in the paper.

  17. DNA as sensors and imaging agents for metal ions.

    Science.gov (United States)

    Xiang, Yu; Lu, Yi

    2014-02-17

    Increasing interest in detecting metal ions in many chemical and biomedical fields has created demands for developing sensors and imaging agents for metal ions with high sensitivity and selectivity. This review covers recent progress in DNA-based sensors and imaging agents for metal ions. Through both combinatorial selection and rational design, a number of metal-ion-dependent DNAzymes and metal-ion-binding DNA structures that can selectively recognize specific metal ions have been obtained. By attachment of these DNA molecules with signal reporters such as fluorophores, chromophores, electrochemical tags, and Raman tags, a number of DNA-based sensors for both diamagnetic and paramagnetic metal ions have been developed for fluorescent, colorimetric, electrochemical, and surface Raman detection. These sensors are highly sensitive (with a detection limit down to 11 ppt) and selective (with selectivity up to millions-fold) toward specific metal ions. In addition, through further development to simplify the operation, such as the use of "dipstick tests", portable fluorometers, computer-readable disks, and widely available glucose meters, these sensors have been applied for on-site and real-time environmental monitoring and point-of-care medical diagnostics. The use of these sensors for in situ cellular imaging has also been reported. The generality of the combinatorial selection to obtain DNAzymes for almost any metal ion in any oxidation state and the ease of modification of the DNA with different signal reporters make DNA an emerging and promising class of molecules for metal-ion sensing and imaging in many fields of applications.

  18. EFFECT OF METAL IONS ON THE LACCASE ACTIVITY

    Institute of Scientific and Technical Information of China (English)

    XiwenWang; HuaiyuZhan; WeiHe

    2004-01-01

    The effects of five metal ions(Fe-'~,Ca-~*,Mg2*,Mn-'-"Cu2") on ABTS oxidation catalyzed by laccase werestudied under condition of pH=4.5 byspectrophotometer. The results show that Fe2+ ionhas obvious effect on the activity and the nature ofinhibition is competitive type. It is found that theinhibition is realized through the reduction ofABTS.by Fe2+ ion. Other metal ions have slight influence onlaccase activity.

  19. Alkaline earth metal doped tin oxide as a novel oxygen storage material

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Qiang, E-mail: dong@tagen.tohoku.ac.jp [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku Sendai 980-8577 (Japan); Yin, Shu; Yoshida, Mizuki; Wu, Xiaoyong; Liu, Bin [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku Sendai 980-8577 (Japan); Miura, Akira; Takei, Takahiro; Kumada, Nobuhiro [Department of Research Interdisciplinary Graduate School of Medicine and Engineering, University of Yamanashi, Miyamae cho-7, Kofu 400-8511 (Japan); Sato, Tsugio [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku Sendai 980-8577 (Japan)

    2015-09-15

    Alkaline earth metal doped tin oxide (SnO{sub 2}) hollow nanospheres with a diameter of 50 nm have been synthesized successfully via a facial solvothermal route in a very simple system composed of only ethanol, acetic acid, SnCl{sub 4}·5H{sub 2}O and A(NO{sub 3}){sub 2}·xH{sub 2}O (A = Mg, Ca, Sr, Ba). The synthesized undoped SnO{sub 2} and A-doped SnO{sub 2} hollow nanospheres were characterized by the oxygen storage capacity (OSC), X-ray diffraction, transmission electron microscopy and the Brunauer–Emmet–Teller (BET) technique. The OSC values of all samples were measured using thermogravimetric-differential thermal analysis. The incorporation of alkaline earth metal ion into tin oxide greatly enhanced the thermal stability and OSC. Especially, Ba-doped SnO{sub 2} hollow nanospheres calcined at 1000 °C for 20 h with a BET surface area of 61 m{sup 2} g{sup −1} exhibited the considerably high OSC of 457 μmol-O g{sup −1} and good thermal stability. Alkaline earth metal doped tin oxide has the potential to be a novel oxygen storage material.

  20. Oxidation of cyclohexane catalyzed by metal-ion-exchanged zeolites.

    Science.gov (United States)

    Sökmen, Ilkay; Sevin, Fatma

    2003-08-01

    The ion-exchange rates and capacities of the zeolite NaY for the Cu(II), Co(II), and Pb(II) metal ions were investigated. Ion-exchange equilibria were achieved in approximately 72 h for all the metal ions. The maximum ion exchange of metal ions into the zeolite was found to be 120 mg Pb(II), 110 mg Cu(II), and 100 mg Co(II) per gram of zeolite NaY. It is observed that the exchange capacity of a zeolite varies with the exchanged metal ion and the amount of metal ions exchanged into zeolite decreases in the sequence Pb(II) > Cu(II) > Co(II). Application of the metal-ion-exchanged zeolites in oxidation of cyclohexane in liquid phase with visible light was examined and it is observed that the order of reactivity of the zeolites for the conversion of cyclohexane to cyclohexanone and cyclohexanol is CuY > CoY > PbY. It is found that conversion increases by increase of the empty active sites of a zeolite and the formation of cyclohexanol is favored initially, but the cyclohexanol is subsequently converted to cyclohexanone.

  1. Preparation of Dithizone Functionalized Polystyrene for Detecting Heavy Metal Ion

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Hyeon Ho; Kim, Younghun [Kwangwoon University, Seoul (Korea, Republic of)

    2015-04-15

    Colorimetric sensors were usually used to detect specific metal ions using selective color change of solutions. While almost organic dye in colorimetric sensors detected single molecule, dithizone (DTZ) solution could be separately detected above 5 kinds of heavy metal ions by the change of clear color. Namely, DTZ could be used as multicolorimetric sensors. However, DTZ was generally used as aqueous type and paper/pellet-type DTZ was not reported yet. Therefore, in this work, polystyrene (PS) was prepared to composite with DTZ and then DTZ/PS pellet was obtained, which was used to selectively detect 10 kinds of heavy metal ions. When 10 ppm of Hg and Co ions was exposed in DTZ/PS pellets, clear color change was revealed. It is noted that DTZ/PS pellet could be used in detecting of heavy metal ion as dry type.

  2. Competing binding of metal ions with protein studied by microdialysis

    Institute of Scientific and Technical Information of China (English)

    GUO; Ming(郭明); KONG; Liang(孔亮); MAO; Xiqin(毛希琴); LI; Xin(历欣); ZOU; Hanfa(邹汉法)

    2002-01-01

    A method has been established to study the competing binding of metal ions with protein by a combined technique of microdialysis with high performance liquid chromatography (HPLC). Ni2+, Cd2+, Zn2+, Cu2+ and human serum albumin (HSA) were chosen as model metal ions and protein. The experimental results show that Ni2+ and Cu2+ share a common primary binding site on HSA, and Zn2+ and Cd2+ share a different common primary binding site from them, but there is a common multi-metal binding site for all of those four metal ions. This method show advantages of fast sampling, easily to be operated and especially to be useful when ideal spectroscopic probes are not available for the study of interaction between protein and metal ions.

  3. Metallic ion release from biocompatible cobalt-based alloy

    Directory of Open Access Journals (Sweden)

    Dimić Ivana D.

    2014-01-01

    Full Text Available Metallic biomaterials, which are mainly used for the damaged hard tissue replacements, are materials with high strength, excellent toughness and good wear resistance. The disadvantages of metals as implant materials are their susceptibility to corrosion, the elastic modulus mismatch between metals and human hard tissues, relatively high density and metallic ion release which can cause serious health problems. The aim of this study was to examine metallic ion release from Co-Cr-Mo alloy in artificial saliva. In that purpose, alloy samples were immersed into artificial saliva with different pH values (4.0, 5.5 and 7.5. After a certain immersion period (1, 3 and 6 weeks the concentrations of released ions were determined using Inductively Coupled Plasma - Mass Spectrophotometer (ICP-MS. The research findings were used in order to define the dependence between the concentration of released metallic ions, artificial saliva pH values and immersion time. The determined released metallic ions concentrations were compared with literature data in order to describe and better understand the phenomenon of metallic ion release from the biocompatible cobalt-based alloy. [Projekat Ministarstva nauke Republike Srbije, br. III 46010 i br. ON 174004

  4. Structural variations in layered alkaline earth metal cyclohexyl phosphonates

    Indian Academy of Sciences (India)

    Ramaswamy Murugavel; Nayanmoni Gogoi

    2009-06-01

    Two series of alkaline earth metal cyclohexyl phosphonates, M(C6H11PO3H)2(H2O) (M = Ca, Sr and Ba) (1–3) and M(C6H11PO3)(H2O) (M = Mg, Ca, Sr, and Ba) (4–7) have been synthesized under mild reaction conditions. All new compounds have been characterized using elemental analysis, IR, TGA and powder X-ray diffraction techniques. The molecular structure of compound 2 determined using single crystal X-ray diffraction technique reveals a layered polymeric structure.

  5. Electron-phonon coupling in the rare-earth metals

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt; Mertig, I.

    1990-01-01

    We have estimated the strength of the mass enhancement of the conduction electrons due to electron-phonon interaction in the rare metals Sc, Y, and La–Lu. The underlying self-consistent energy bands were obtained by means of the scalar relativistic linear-muffin-tin-orbital method, and the electron......-phonon parameters were calculated within the Gaspari-Gyorffy formulation. For the heavier rare earths Gd–Tm spin polarization was included both in the band-structure calculations and in the treatment of the electron-phonon coupling to take into account the spin splitting of the conduction electrons induced by the 4...

  6. Synthesis and luminescence of some rare earth metal complexes

    Science.gov (United States)

    Bochkarev, Mikhail N.; Pushkarev, Anatoly P.

    2016-12-01

    In the present paper the synthesis, photoand electroluminescent properties of new rare earth metal complexes prepared and studied at the Razuvaev Institute of Organometallic Chemistry during the last decade are reviewed. The obtained compounds give luminescence in UV, visible and NIR regions. The substituted phenolates, naphtholates, mercaptobenzothiazolate, 8-oxyquinolinolate, polyfluorinated alcoholates and chalcogenophosphinates were used as ligands. The synthesis and structure of unusual three-nuclear sulfidenitride clusters of Nd and Dy are described. The new excitation mechanism of ytterbium phenolates and naphtholates, which includes the stage of reversible reduction of Yb to divalent state and oxidation of the ligands in the excitation process, is discussed.

  7. Quantum computing with alkaline-Earth-metal atoms.

    Science.gov (United States)

    Daley, Andrew J; Boyd, Martin M; Ye, Jun; Zoller, Peter

    2008-10-24

    We present a complete scheme for quantum information processing using the unique features of alkaline-earth-metal atoms. We show how two completely independent lattices can be formed for the 1S0 and 3P0 states, with one used as a storage lattice for qubits encoded on the nuclear spin, and the other as a transport lattice to move qubits and perform gate operations. We discuss how the 3P2 level can be used for addressing of individual qubits, and how collisional losses from metastable states can be used to perform gates via a lossy blockade mechanism.

  8. A rare earth-based metal-organic framework for moisture removal and control in confined spaces

    KAUST Repository

    Eddaoudi, Mohamed

    2017-04-13

    A method for preparing a metal-organic framework (MOF) comprising contacting one or more of a rare earth metal ion component with one or more of a tetratopic ligand component, sufficient to form a rare earth-based MOF for controlling moisture in an environment. A method of moisture control in an environment comprising adsorbing and/or desorbing water vapor in an environment using a MOF, the MOF including one or more of a rare earth metal ion component and one or more of a tetratopic ligand component. A method of controlling moisture in an environment comprising sensing the relative humidity in the environment comprising a MOF; and adsorbing water vapor on the MOF if the relative humidity is above a first level, sufficient to control moisture in an environment. The examples relate to a MOF created from 1,2,4,5-Tetrakis(4-carboxyphenyl )benzene (BTEB) as tetratopic ligand, 2-fluorobenzoic acid and Y(NO3)3, Tb(NO3)3 and Yb(NO3)3 as rare earth metals.

  9. Synthesis of Novel Metal Ion Sensors Based on DNA-Metal Interactions

    Institute of Scientific and Technical Information of China (English)

    Akira Ono; Shiqi Cao; Humika Togashi; Yoko Miyake

    2005-01-01

    @@ 1Introduction The interactions of metal ions with nucleic acids, nucleosides, and nucleo-bases have been extensively investigated[1,2]. We have reported that thymine-thymine (T-T) and cytosine-cytosine (C- C) miss base pairs in DNA duplexes highly selectively capture HgⅡ ion and Ag Ⅰ ion, which result in formations of metal-mediated base pairs, T-HgⅡ -T and C-AgⅠ -C, in duplexes[3]. The phenomenon is expected to be useful for a variety of studies such as synthesis of nano-wires containing metal ions, developing metal-ion sensing methods, etc.Here, we report novel oligodeoxyribonucleotide (ODN)-based sensors that detect HgⅡ ions and AgⅠ ions in aqueous solutions.

  10. Rechargeable dual-metal-ion batteries for advanced energy storage.

    Science.gov (United States)

    Yao, Hu-Rong; You, Ya; Yin, Ya-Xia; Wan, Li-Jun; Guo, Yu-Guo

    2016-04-14

    Energy storage devices are more important today than any time before in human history due to the increasing demand for clean and sustainable energy. Rechargeable batteries are emerging as the most efficient energy storage technology for a wide range of portable devices, grids and electronic vehicles. Future generations of batteries are required to have high gravimetric and volumetric energy, high power density, low price, long cycle life, high safety and low self-discharge properties. However, it is quite challenging to achieve the above properties simultaneously in state-of-the-art single metal ion batteries (e.g. Li-ion batteries, Na-ion batteries and Mg-ion batteries). In this contribution, hybrid-ion batteries in which various metal ions simultaneously engage to store energy are shown to provide a new perspective towards advanced energy storage: by connecting the respective advantages of different metal ion batteries they have recently attracted widespread attention due to their novel performances. The properties of hybrid-ion batteries are not simply the superposition of the performances of single ion batteries. To enable a distinct description, we only focus on dual-metal-ion batteries in this article, for which the design and the benefits are briefly discussed. We enumerate some new results about dual-metal-ion batteries and demonstrate the mechanism for improving performance based on knowledge from the literature and experiments. Although the search for hybrid-ion batteries is still at an early age, we believe that this strategy would be an excellent choice for breaking the inherent disadvantages of single ion batteries in the near future.

  11. EFFECT OF METAL IONS ON THE LACCASE ACTIVITY

    Institute of Scientific and Technical Information of China (English)

    Xiwen Wang; Huaiyu Zhan; Wei He

    2004-01-01

    The effects of five metal ions(Fe2+、Ca2+、Mg2+、Mn2+、Cu2+) on ABTS oxidation catalyzed by laccase were studied under condition of pH=4.5 by spectrophotometer. The results show that Fe2+ ion has obvious effect on the activity and the nature of inhibition is competitive type. It is found that the inhibition is realized through the reduction ofABTS.by Fe2+ ion. Other metal ions have slight influence on laccase activity.

  12. Study of structural and spectroscopic behavior of Sm3+ ions in lead-zinc borate glasses containing alkali metal ions

    Science.gov (United States)

    Sasi Kumar, M. V.; Babu, S.; Rajeswara Reddy, B.; Ratnakaram, Y. C.

    2017-06-01

    High luminescence behavior of rare earth inorganic glasses have a variety of uses in the industry. In the past few decades, rare earth ions with characteristic photonics applications are being hosted by heavy metal oxide glasses. Among the rare earth ions Sm3+ ion has features which make it apt for high density optical storage. The authors of the paper have experimented to synthesize Sm3+ doped glasses. In this regard a new series of borate glasses doped with 1 mol% Sm3+ ion are developed by using melt-quenching technique. XRD, FTIR, optical absorption, luminescence techniques are used to study the various characteristics of Sm3+ ion in the present glass matrices. The XRD spectra confirms the amorphous nature of glasses. Further, the researchers have used differential thermal analysis to study the glass transition temperature. The structural groups in the prepared glasses are studied using Fourier transform infrared spectra. From the measurement of its optical absorption, three phenomenological Judd-Ofelt intensity parameters (Ω2, Ω4 and Ω6) have been computed. Based on these Judd-Ofelt intensity parameters, radiative properties such as radiative probabilities (Arad), branching ratios (β), and radiative life time (τR) are calculated. The excitation spectra of Sm3+ doped lithium heavy metal borate glass matrix is recorded under the emission wavelength of 600 nm. The emission spectra are recorded under 404 nm excitation wavelength. From various emission transitions, 4G5/2 → 6H7/2 and 4G5/2 → 6H9/2 bands could be of interest for various applications. The decay profiles of 4G5/2 level exhibit single exponential nature in all the prepared glass matrices. The potassium glass matrix exhibits higher quantum efficiency than the other glass matrices. Finally, by going through these several spectroscopic characterizations, it is concluded that the prepared Sm3+ doped lead-zinc borate glasses might be useful for visible light applications.

  13. Study of structural and spectroscopic behavior of Sm3+ ions in lead-zinc borate glasses containing alkali metal ions

    Science.gov (United States)

    Sasi Kumar, M. V.; Babu, S.; Rajeswara Reddy, B.; Ratnakaram, Y. C.

    2017-02-01

    High luminescence behavior of rare earth inorganic glasses have a variety of uses in the industry. In the past few decades, rare earth ions with characteristic photonics applications are being hosted by heavy metal oxide glasses. Among the rare earth ions Sm3+ ion has features which make it apt for high density optical storage. The authors of the paper have experimented to synthesize Sm3+ doped glasses. In this regard a new series of borate glasses doped with 1 mol% Sm3+ ion are developed by using melt-quenching technique. XRD, FTIR, optical absorption, luminescence techniques are used to study the various characteristics of Sm3+ ion in the present glass matrices. The XRD spectra confirms the amorphous nature of glasses. Further, the researchers have used differential thermal analysis to study the glass transition temperature. The structural groups in the prepared glasses are studied using Fourier transform infrared spectra. From the measurement of its optical absorption, three phenomenological Judd-Ofelt intensity parameters (Ω2, Ω4 and Ω6) have been computed. Based on these Judd-Ofelt intensity parameters, radiative properties such as radiative probabilities (Arad), branching ratios (β), and radiative life time (τR) are calculated. The excitation spectra of Sm3+ doped lithium heavy metal borate glass matrix is recorded under the emission wavelength of 600 nm. The emission spectra are recorded under 404 nm excitation wavelength. From various emission transitions, 4G5/2 → 6H7/2 and 4G5/2 → 6H9/2 bands could be of interest for various applications. The decay profiles of 4G5/2 level exhibit single exponential nature in all the prepared glass matrices. The potassium glass matrix exhibits higher quantum efficiency than the other glass matrices. Finally, by going through these several spectroscopic characterizations, it is concluded that the prepared Sm3+ doped lead-zinc borate glasses might be useful for visible light applications.

  14. METAL ION SORPTION TO BIRCH AND SPRUCE WOOD

    Directory of Open Access Journals (Sweden)

    Pingping Su,

    2012-02-01

    Full Text Available Sorption of metal ions from aqueous solutions to birch wood and spruce heartwood and sapwood has been studied. Functional groups in wood were determined by acid-base titrations. The sorption of metal ions to wood of the different tree species was investigated by a column chromatographic technique. The mechanism of sorption is mainly ion exchange by complexation of metal ions to the functional groups, e.g. carboxyl groups and phenolic hydroxyl groups, in the wood phase. By combination of the sorption experiments with four different metal ion mixtures, the following affinity order was established for spruce sapwood particles: Fe3+>>Pb2+>>Cu2+>>Fe2+>Cd2+>Zn2+>Ni2+>Mn2+≥Ca2+≥Sr2+≥Ba2+>>Mg2+>>K+>Na+≈Li+. For all three types of stemwood studied, the affinity orders were almost the same. The ion exchange properties of wood were comparable to those of a weakly acid cation exchanger. The affinity order obtained for the synthetic resin was quite similar to the order given above for wood. The metal sorption properties of wood materials imply that they could be a potential material for removal of metal ions from aqueous solutions.

  15. Designer ligands: The search for metal ion selectivity

    Directory of Open Access Journals (Sweden)

    Perry T. Kaye

    2011-03-01

    Full Text Available The paper reviews research conducted at Rhodes University towards the development of metal-selective ligands. The research has focused on the rational design, synthesis and evaluation of novel ligands for use in the formation of copper complexes as biomimetic models of the metalloenzyme, tyrosinase, and for the selective extraction of silver, nickel and platinum group metal ions in the presence of contaminating metal ions. Attention has also been given to the development of efficient, metal-selective molecular imprinted polymers.

  16. Metal ion removal from aqueous solution using physic seed hull.

    Science.gov (United States)

    Mohammad, Masita; Maitra, Saikat; Ahmad, Naveed; Bustam, Azmi; Sen, T K; Dutta, Binay K

    2010-07-15

    The potential of physic seed hull (PSH), Jantropha curcas L. as an adsorbent for the removal of Cd(2+) and Zn(2+) metal ions from aqueous solution has been investigated. It has been found that the amount of adsorption for both Cd(2+) and Zn(2+) increased with the increase in initial metal ions concentration, contact time, temperature, adsorbent dosage and the solution pH (in acidic range), but decreased with the increase in the particle size of the adsorbent. The adsorption process for both metal ions on PSH consists of three stages-a rapid initial adsorption followed by a period of slower uptake of metal ions and virtually no uptake at the final stage. The kinetics of metal ions adsorption on PSH followed a pseudo-second-order model. The adsorption equilibrium data were fitted in the three adsorption isotherms-Freundlich, Langmuir and Dubinin-Radushkevich isotherms. The data best fit in the Langmuir isotherm indication monolayer chemisorption of the metal ions. The adsorption capacity of PSH for both Zn(2+) and Cd(2+) was found to be comparable with other available adsorbents. About 36-47% of the adsorbed metal could be leached out of the loaded PSH using 0.1M HCl as the eluting medium.

  17. Antimicrobial Effect of Metal Ions Substitution to HAp, Zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y. J.; Kim, S. B.; Cho, S. B; Cho, K. J.; Lee, T. H. [Pai Chai University, Taejeon (Korea); Kim, T. N. [Korea Institute of Geoscience and Mineral Resources, Taejeon (Korea)

    2001-02-01

    Generally, hydroxyapatite(HAp), zeolite, carbon molecular sieve, activated carbon and alumina are used as heavy metal ions adsorption materials. Among those adsorption materials, HAp which has good positive ion-exchange ability with metal ion, and zeolite are utilized in wastewater treatment. Most of water pollutions are caused by hazardous heavy metals ions as well as bacteria in waste water. In this study, a adsorption materials (HAp and zeolite) are ion-exchanged with a well known antimicrobial metal ions, such as Ag{sup +}, Cu{sup 2+}, and Zn{sup 2+}, in order to give a adsorption of heavy metal ions and a killing effects of bacteria. The antimicrobial effects of adsorption materials are observed using by E. Coli. The results show that there is a complete antimicrobial effect in the adsorption materials with Ag{sup +} at the concentration of 1x10{sup -4}cell/ml of E. Coli until 24 hours. However, there is not good antimicrobial effects in the adsorption materials with Cu{sup 2+} and Zn{sup 2+} substitution. Feng et. al. showed the denaturation effects of silver ions which induces the condensed DNA molecules and losing their replication abilities. (author). 13 refs., 6 figs., 2 tabs.

  18. Experimental Study on Surface Reactions of Heavy Metal Ions With Quartz—Aqueous Ion Concentration Dependence

    Institute of Scientific and Technical Information of China (English)

    吴宏海; 吴大清; 等

    1999-01-01

    Adsorption of divalent metal ions,including Cu2+,Pb2+,Zn2+,Cd2+ and Ni2+,on quartz surface was measured as a function of metal ion concentration at 30℃under condi tions of solution pH=6.5 and ion strength I=0.1mol/L.Results of the experimental measuements can be described very well by adsorption isoterm dquations of Freudlich.The correlation coefficients(r)of adsorption isotherm lines are>0.96.Moreover,the exprimental data were interpreted on the basis of surface complexation model.Te experimental results showed that the monodentate-coordinated metal ion surface complex species(SOM+)are predominant over the bidentate-coordinated metal ion surface complex species[(SO)2M]formed only by the ions Cu2+,Zn2+ and Ni2+,And the relevant apparent surface complexation constants are lgKM=2.2-3.3 in order of KCd≥KPb>KZn>KNi≥KCu,and lgβM=5.8-6.8 in oder of βNi>βZn>βCu.Therefore,the reactive ability of the ions onto mineral surface of quartz follows the order of Cd>Pb>Zn>Ni>Cu under the above-mentioned solution conditions.The apparent surface complexation constants,influenced by the surface potential,surface species and hydrolysis of metal ions,depend mainly on the Born solvation coefficeient of the metal ions.

  19. Homometallic rare-Earth metal phosphinidene clusters: synthesis and reactivity.

    Science.gov (United States)

    Wang, Kai; Luo, Gen; Hong, Jianquan; Zhou, Xigeng; Weng, Linhong; Luo, Yi; Zhang, Lixin

    2014-01-20

    Two new trinuclear μ3 -bridged rare-earth metal phosphinidene complexes, [{L(Ln)(μ-Me)}3 (μ3 -Me)(μ3 -PPh)] (L=[PhC(NC6 H4 iPr2 -2,6)2 ](-) , Ln=Y (2 a), Lu (2 b)), were synthesized through methane elimination of the corresponding carbene precursors with phenylphosphine. Heating a toluene solution of 2 at 120 °C leads to an unprecedented ortho CH bond activation of the PhP ligand to form the bridged phosphinidene/phenyl complexes. Reactions of 2 with ketones, thione, or isothiocyanate show clear phospha-Wittig chemistry, giving the corresponding organic phosphinidenation products and oxide (sulfide) complexes. Reaction of 2 with CS2 leads to the formation of novel trinuclear rare-earth metal thione dianion clusters, for which a possible pathway was determined by DFT calculation. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Production of rare-earth atomic negative ion beams in a cesium-sputter-type negative ion source

    Energy Technology Data Exchange (ETDEWEB)

    Davis, V.T. [Test Support Division, Defense Threat Reduction Agency, West Desert Test Center, Dugway, UT 84022-5000 (United States)]. E-mail: vernon.davis@us.army.mil; Covington, A.M. [Department of Physics, University of Nevada, MS 220, Reno, NV 89557-0058 (United States); Duvvuri, S.S. [Department of Physics, University of Nevada, MS 220, Reno, NV 89557-0058 (United States); Kraus, R.G. [Department of Physics, University of Nevada, MS 220, Reno, NV 89557-0058 (United States); Emmons, E.D. [Department of Physics, University of Nevada, MS 220, Reno, NV 89557-0058 (United States); Kvale, T.J. [Department of Physics and Astronomy, University of Toledo, Toledo, OH (United States); Thompson, J.S. [Department of Physics, University of Nevada, MS 220, Reno, NV 89557-0058 (United States)

    2007-08-15

    The desire to study negative ion structure and negative ion-photon interactions has spurred the development of ion sources for use in research and industry. The many different types of negative ion sources available today differ in their characteristics and abilities to produce anions of various species. Thus the importance of choosing the correct type of negative ion source for a particular research or industrial application is clear. In this study, the results of an investigation on the production of beams composed of negatively-charged rare-earth ions from a cylindrical-cathode-geometry, cesium-sputter-type negative ion source are presented. Beams of atomic anions have been observed for most of the first-row rare-earth elements, with typical currents ranging from hundreds of picoamps to several nanoamps.

  1. Kinetic Analysis of Metal Ions: An Undergraduate Laboratory Experiment.

    Science.gov (United States)

    Williams, Kathryn R.

    1985-01-01

    Reports on the adaptation of a kinetic method of analysis of metal ions for use in an undergraduate teaching laboratory. Background information, procedures used, and analysis of typical results obtained are provided. (JN)

  2. Electron Capture Dissociation of Trivalent Metal Ion-Peptide Complexes

    National Research Council Canada - National Science Library

    Flick, Tawnya G; Donald, William A; Williams, Evan R

    2013-01-01

    .... ECD of these doubly charged complexes containing MT results in significantly higher electron capture efficiency and sequence coverage than peptide-divalent metal ion complexes that have the same net charge...

  3. COORDINATION OF CASSAVA STARCH TO METAL IONS AND ...

    African Journals Online (AJOL)

    a

    Soc. Ethiop. 2003, 17(2), 155-165. ISSN 1011-3924 ... Cassava starch formed Werner-type complexes with ions of metals from the transition groups. This was proven by conductivity and electron paramagnetic resonance measurements.

  4. Metal Ion Selectivity of Kojate Complexes: A Theoretical Study

    Directory of Open Access Journals (Sweden)

    Sarita Singh

    2013-01-01

    Full Text Available Density functional calculations have been performed on four-coordinate kojate complexes of selected divalent metal ions in order to determine the affinity of the metal ions for the kojate ion. The complexation reactions are characterized by high energies, showing that they are highly exothermic. It is found that Ni(II exhibits the highest affinity for the kojate ion, and this is attributed to the largest amount of charge transfer from the ligand to the metal ion. The Ni(II complex has distorted square planar structure. The HOMOs and LUMOs of the complexes are also discussed. All complexes display a strong band at ~1500 cm−1 corresponding to the stretching frequency of the weakened carbonyl bond. Comparison of the complexation energies for the two steps shows that most of the complexation energy is realized in the first step. The energy released in the second step is about one-third that of the first step.

  5. Smart textile device using ion polymer metal compound.

    Science.gov (United States)

    Nakamura, Taro; Ihara, Tadashi

    2013-01-01

    We have developed a smart textile device that detects angular displacement of attached surface using ion polymer metal compound. The device was composed of ion polymer metal compound (IPMC) which was fabricated from Nafion resin by heat-press and chemical gold plating. The generated voltage from IPMC was measured as a function of bending angle. Fabricated IPMC device was weaved into a cotton cloth and multidirectional movements were detected.

  6. Isothermal Titration Calorimetry Measurements of Metal Ions Binding to Proteins.

    Science.gov (United States)

    Quinn, Colette F; Carpenter, Margaret C; Croteau, Molly L; Wilcox, Dean E

    2016-01-01

    ITC measurements involving metal ions are susceptible to a number of competing reactions (oxidation, precipitation, and hydrolysis) and coupled reactions involving the buffer and protons. Stabilization and delivery of the metal ion as a well-defined and well-characterized complex with the buffer, or a specific ligand, can suppress undesired solution chemistry and, depending on the stability of the metal complex, allow accurate measurements of higher affinity protein-binding sites. This requires, however, knowledge of the thermodynamics of formation of the metal complex and accounting for its contribution to the experimentally measured values (KITC and ΔHITC) through a post hoc analysis that provides the condition-independent binding thermodynamics (K, ΔG(o), ΔH, ΔS, and ΔCP). This analysis also quantifies the number of protons that are displaced when the metal ion binds to the protein. © 2016 Elsevier Inc. All rights reserved.

  7. Erosion yield of metal surface under ion pulsed irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Krivobokov, Valery; Stepanova, Olga, E-mail: omsa@tpu.ru; Yuryeva, Alena

    2013-11-15

    The paper is devoted to the study of erosion processes on a metal surface (Ag, Ni, Cu, W) under argon ion bombardment. The erosion yields including the sputtered and evaporated particles have been calculated for a wide range of the initial ion energy (1–1000 keV). They are revealed to reach the values from units to 10{sup 4} atom/ion under a pulsed ion beam with the power density of 10{sup 2}–10{sup 10} W/cm{sup 2}. The ion beam and target parameters are shown to influence on the erosion intensity.

  8. Functional identification of catalytic metal ion binding sites within RNA.

    Directory of Open Access Journals (Sweden)

    James L Hougland

    2005-09-01

    Full Text Available The viability of living systems depends inextricably on enzymes that catalyze phosphoryl transfer reactions. For many enzymes in this class, including several ribozymes, divalent metal ions serve as obligate cofactors. Understanding how metal ions mediate catalysis requires elucidation of metal ion interactions with both the enzyme and the substrate(s. In the Tetrahymena group I intron, previous work using atomic mutagenesis and quantitative analysis of metal ion rescue behavior identified three metal ions (MA, MB, and MC that make five interactions with the ribozyme substrates in the reaction's transition state. Here, we combine substrate atomic mutagenesis with site-specific phosphorothioate substitutions in the ribozyme backbone to develop a powerful, general strategy for defining the ligands of catalytic metal ions within RNA. In applying this strategy to the Tetrahymena group I intron, we have identified the pro-SP phosphoryl oxygen at nucleotide C262 as a ribozyme ligand for MC. Our findings establish a direct connection between the ribozyme core and the functionally defined model of the chemical transition state, thereby extending the known set of transition-state interactions and providing information critical for the application of the recent group I intron crystallographic structures to the understanding of catalysis.

  9. Laccase Immobilization by Chelated Metal Ion Coordination Chemistry

    Directory of Open Access Journals (Sweden)

    Qingqing Wang

    2014-09-01

    Full Text Available In this work, amidoxime polyacrylonitrile (AOPAN nanofibrous membrane was prepared by a reaction between PAN nanofibers and hydroxylamine hydrochloride. The AOPAN nanofibrous membranes were used for four metal ions (Fe3+, Cu2+, Ni2+, Cd2+ chelation under different conditions. Further, the competition of different metal ions coordinating with AOPAN nanofibrous membrane was also studied. The AOPAN chelated with individual metal ion (Fe3+, Cu2+, Ni2+, Cd2+ and also the four mixed metal ions were further used for laccase (Lac immobilization. Compared with free laccase, the immobilized laccase showed better resistance to pH and temperature changes as well as improved storage stability. Among the four individual metal ion chelated membranes, the stability of the immobilized enzymes generally followed the order as Fe–AOPAN–Lac > Cu–AOPAN–Lac > Ni–AOPAN–Lac > Cd–AOPAN–Lac. In addition, the immobilized enzyme on the carrier of AOPAN chelated with four mixed metal ions showed the best properties.

  10. Promoter Effects of Rare Earth Ions on Electrocatalytic Oxidation of Methanol

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The promoter effects of rare earth ions on the electrocatalytic oxidation of methanol at the Pt electrode were studied using the cyclic voltammetry and stable polarization techniques. It was found for the first time that Eu、Ho、Dy ions could accelerate the electrocatalytic oxidation of methanol at the Pt electrode, while Lu、Pr、Yb、Sm ions showed inhibitor effects.

  11. Potentiometric and spectroscopic study of the interaction of 3d transition metal ions with inositol hexakisphosphate

    Science.gov (United States)

    Veiga, Nicolás; Macho, Israel; Gómez, Kerman; González, Gabriel; Kremer, Carlos; Torres, Julia

    2015-10-01

    Among myo-inositol phosphates, the most abundant in nature is the myo-inositol hexakisphosphate, InsP6. Although it is known to be vital to cell functioning, the biochemical research into its metabolism needs chemical and structural analysis of all the protonation, complexation and precipitation processes that it undergoes in the biological media. In view of its high negative charge at physiological level, our group has been leading a thorough research into the InsP6 chemical and structural behavior in the presence of the alkali and alkaline earth metal ions essential for life. The aim of this article is to extend these studies, dealing with the chemical and structural features of the InsP6 interaction with biologically relevant 3d transition metal ions (Fe(II), Fe(III), Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)), in a non-interacting medium and under simulated physiological conditions. The metal-complex stability constants were determined by potentiometry, showing under ligand-excess conditions the formation of mononuclear species in different protonation states. Under metal ion excess, polymetallic species were detected for Fe(II), Fe(III), Zn(II) and Cu(II). Additionally, the 31P NMR and UV-vis spectroscopic studies provided interesting structural aspects of the strong metal ion-InsP6 interaction.

  12. Syntheses, structure and properties of Alkaline-earth metal salts of 4-Nitrophenylacetic acid

    Indian Academy of Sciences (India)

    BIKSHANDARKOIL R SRINIVASAN; KIRAN T DHAVSKAR; CHRISTIAN NÄTHER

    2016-11-01

    The synthesis, crystal structure, spectral characteristics and thermal properties of alkaline-earth metal salts of 4-nitrophenylacetic acid (4-npaH) namely, [Mg(H₂O)₆](4-npa)₂·4H₂O (4-npa = 4-nitrophenylacetate) (1), [Ca(H₂O)₂(4-npa)₂] (2) and [Sr(H₂O)₃(4-npa)₂]·4.5H₂O(3) are reported. In 1, the 4-npa ion functions as a charge balancing counter anion for the octahedral [Mg(H₂O)6]²⁺ unit with the Mg(II) ion situated on a centre of inversion. The two unique lattice water molecules link the [Mg(H₂O)₆]²⁺ cations and 4-npa anions with the aid of O-H· · ·O interactions. Compounds 2 and 3 are one-dimensional (1-D) coordination polymers containing an eight coordinated Ca(II) situated in a general position and a nine coordinated Sr(II) located on a twofold axis. The μ₂-bridging tridentate binding modes of the crystallographically independent 4-npa ligands in 2 and the unique 4-npa ligand in 3 link the bivalent metal ions into an infinite chain with alternating Ca· · · Ca separations of 3.989 and 4.009 Å, respectively, and a single Sr· · · Sr separation of 4.194Å in the 1-D chain.

  13. Molecular rare-earth-metal hydrides in non-cyclopentadienyl environments.

    Science.gov (United States)

    Fegler, Waldemar; Venugopal, Ajay; Kramer, Mathias; Okuda, Jun

    2015-02-02

    Molecular hydrides of the rare-earth metals play an important role as homogeneous catalysts and as counterparts of solid-state interstitial hydrides. Structurally well-characterized non-metallocene-type hydride complexes allow the study of elementary reactions that occur at rare-earth-metal centers and of catalytic reactions involving bonds between rare-earth metals and hydrides. In addition to neutral hydrides, cationic derivatives have now become available.

  14. metal ion sequestration: an exciting dimension for molecularly ...

    African Journals Online (AJOL)

    The use of a tight binding macrocyclic ligand to complex a metal ion so that this serves as receptee on ... nickel(lI) ion whose chemistry is a reasonable substitute for many of the common environmentally .... certain soil bacteria secrete powerful.

  15. Metal ion trend may be more predictive for malfunctioning metal-on-metal implants than a single measurement

    NARCIS (Netherlands)

    Smolders, J.M.; Hol, A.; Susante, J.L.C. van

    2013-01-01

    Forty-eight unilateral hip resurfacing arthroplasty patients were evaluated for cobalt and chromium levels. The metal ion trend of 42 well-functioning patients was compared with six sub-optimal functioning patients. Median metal ion levels were significantly higher for the sub-optimal group. For the

  16. In Vivo Metal Ion Imaging Using Fluorescent Sensors.

    Science.gov (United States)

    Van de Bittner, Genevieve C; Hirayama, Tasuku

    2016-01-01

    In vivo imaging in living animals provides the ability to monitor alterations of signaling molecules, ions, and other biological components during various life stages and in disease. The data gained from in vivo imaging can be used for biological discovery or to determine elements of disease progression and can inform the development and translation of therapeutics. Herein, we present theories behind small-molecule, fluorescent, metal ion sensors as well as the methods for their successful application to in vivo metal ion imaging, including ex vivo validation.

  17. THE THEORETICAL STUDY OF ADSORPTION OF METAL IONS ON CHITOSAN

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The interactions between metal ions such as Zn2+, Pb2+, Mn2+, Hg2+, Cd2+, Ni2+ and chitosan have been investigated using the model cluster model method and density functional method. Full optimization and frequency analysis of all cluster models have been performed employing B3LYP hybrid method at 3-21G basis set level except metal ions which were invoked to use effective core potential (ECP) method. The energy changes, and the main structural parameters have been obtained during the theoretical study of the adsorption of metal ions on the chitosan. The calculations showed that the coordination modes of metal ions with chitosan models were different, the geometries of Mn2+, Zn2+, Cd2+, Hg2+, Pb2+ ions coordinated with two nitrogen atoms and two oxygen atoms were distorted tetrahedral, while the square planar structure of Ni2+ coordinated two nitrogen atoms and two oxygen atoms was observed. The heat of reaction between six metal ions and chitosan models showed the order: Mn2+ >Ni2+ >Zn2+ >Pb2+ >Hg2+ >Cd2+, this suggested that the coordination strength of Mn2+ >Ni2+ >Zn2+ >Pb2+ >Hg2+ >Cd2+.

  18. Supramolecular structures constructed from three novel rare earth metal complexes

    Indian Academy of Sciences (India)

    Huaze Dong; Xiaojun Feng; Xia Liu; BiN Zheng; Jianhong Bi; Yan Xue; Shaohua Gou; Yanping Wang

    2015-05-01

    Three rare earth metal supramolecular complexes, {[Tb(2)4](ClO4)3·2H2O(1), [Eu(2)2(H2O)5] (ClO4)3(2) and [Gd(NO3)3(2)2]·2CH3CH2OH(3) ( 2 = 3-Dimethylamino-1-pyridin-2-yl-propenone), have been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction. The crystal structure analysis reveals that the coordination numbers of three complexes (1–3) are 8, 9 and 10, respectively. Three complexes assembled into 3D frameworks based on C-H⋯O, O-H⋯O hydrogen bond linkages.

  19. Hall transport of divalent metal ion modified DNA lattices

    Energy Technology Data Exchange (ETDEWEB)

    Dugasani, Sreekantha Reddy; Lee, Keun Woo; Yoo, Sanghyun; Gnapareddy, Bramaramba; Bashar, Saima; Park, Sung Ha, E-mail: sunghapark@skku.edu [Department of Physics and Sungkyunkwan Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Kim, Si Joon; Jung, Joohye; Jung, Tae Soo; Kim, Hyun Jae, E-mail: hjk3@yonsei.ac.kr [School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of)

    2015-06-29

    We investigate the Hall transport characteristics of double-crossover divalent metal ion (Cu{sup 2+}, Ni{sup 2+}, Zn{sup 2+}, and Co{sup 2+})-modified DNA (M-DNA) lattices grown on silica via substrate-assisted growth. The electronic characteristics of the M-DNA lattices are investigated by varying the concentration of the metal ions and then conducting Hall measurements, including resistivity, Hall mobility, carrier concentration, and magneto resistance. The tendency of the resistivity and Hall mobility was to initially decrease as the ion concentration increased, until reaching the saturation concentration (C{sub s}) of each metal ion, and then to increase as the ion concentration increased further. On the other hand, the carrier concentration revealed the opposite tendency as the resistivity and Hall mobility. The specific binding (≤C{sub s}) and the nonspecific aggregates (>C{sub s}) of the ions into the DNA lattices were significantly affected by the Hall characteristics. The numerical ranges of the Hall parameters revealed that the M-DNA lattices with metal ions had semiconductor-like characteristics. Consequently, the distinct characteristics of the electrical transport through M-DNA lattices will provide useful information on the practical use of such structures in physical devices and chemical sensors.

  20. The DNA-binding and bioactivity of rare earth metal complexes.

    Science.gov (United States)

    Yang, Li; Wang, Bochu; Tan, Jun; Zhu, Liancai

    2013-08-01

    Recently more and more attention is paid to the rare earth metal complexes, because the properties of the rare earth metals are similar to those of the transition metals such as the similar atomic and the ionic radius. A large number of rare metal complexes were synthesized, and their bioactivities were also studied. This review highlights recent researches on the interaction of some rare earth metal complexes with DNA, analyzes how the configuration of the complexes influences the binding affinity, and focuses on the pharmacological activities of the complexes, such as anticancer, antibacterial, antioxidant, anti-inflammatory and anti-virus.

  1. A vacuum spark ion source: High charge state metal ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Yushkov, G. Yu., E-mail: gyushkov@mail.ru; Nikolaev, A. G.; Frolova, V. P. [High Current Electronics Institute, Siberian Branch of the Russian Academy of Science, Tomsk 634055 (Russian Federation); Oks, E. M. [High Current Electronics Institute, Siberian Branch of the Russian Academy of Science, Tomsk 634055 (Russian Federation); Tomsk State University of Control System and Radioelectronics, Tomsk 634050 (Russian Federation)

    2016-02-15

    High ion charge state is often important in ion beam physics, among other reasons for the very practical purpose that it leads to proportionately higher ion beam energy for fixed accelerating voltage. The ion charge state of metal ion beams can be increased by replacing a vacuum arc ion source by a vacuum spark ion source. Since the voltage between anode and cathode remains high in a spark discharge compared to the vacuum arc, higher metal ion charge states are generated which can then be extracted as an ion beam. The use of a spark of pulse duration less than 10 μs and with current up to 10 kA allows the production of ion beams with current of several amperes at a pulse repetition rate of up to 5 pps. We have demonstrated the formation of high charge state heavy ions (bismuth) of up to 15 + and a mean ion charge state of more than 10 +. The physics and techniques of our vacuum spark ion source are described.

  2. A vacuum spark ion source: High charge state metal ion beams

    Science.gov (United States)

    Yushkov, G. Yu.; Nikolaev, A. G.; Oks, E. M.; Frolova, V. P.

    2016-02-01

    High ion charge state is often important in ion beam physics, among other reasons for the very practical purpose that it leads to proportionately higher ion beam energy for fixed accelerating voltage. The ion charge state of metal ion beams can be increased by replacing a vacuum arc ion source by a vacuum spark ion source. Since the voltage between anode and cathode remains high in a spark discharge compared to the vacuum arc, higher metal ion charge states are generated which can then be extracted as an ion beam. The use of a spark of pulse duration less than 10 μs and with current up to 10 kA allows the production of ion beams with current of several amperes at a pulse repetition rate of up to 5 pps. We have demonstrated the formation of high charge state heavy ions (bismuth) of up to 15 + and a mean ion charge state of more than 10 +. The physics and techniques of our vacuum spark ion source are described.

  3. Synthesis and Characteristics of A Novel Heavy Metal Ions Chelator

    Institute of Scientific and Technical Information of China (English)

    LIU Zhuannian; SONG Yejing; HAN Xiaogang

    2012-01-01

    Polyacrylamide-urea-sulfanilamide(PUS) was prepared as a novel heavy metal ions chelator and successfully used to simultaneously remove heavy metals from wastewater effluents.The effects of reaction parameters (sodium hydroxide,material ratio,temprature and contact time) were monitored to specify the best synthesis conditions.PUS was chemically characterized by means of infrared spectroscopy (FTIR) and ultraviolet-visible (UV-Vis).The simultaneous chelation performance of PUS towards selected heavy metals ions,Ni2+,Cu2+,Pb2+,Zn2+,Cd2+ was discussed,showing that Ni2+,Cu2+,Pb2+,Zn2+ could be better chelated.It is indicated that the synthesized PUS is a potential remediation material when used for the treatment of wastewater containing metal ions.

  4. Complexation-induced supramolecular assembly drives metal-ion extraction.

    Science.gov (United States)

    Ellis, Ross J; Meridiano, Yannick; Muller, Julie; Berthon, Laurence; Guilbaud, Philippe; Zorz, Nicole; Antonio, Mark R; Demars, Thomas; Zemb, Thomas

    2014-09-26

    Combining experiment with theory reveals the role of self-assembly and complexation in metal-ion transfer through the water-oil interface. The coordinating metal salt Eu(NO3)3 was extracted from water into oil by a lipophilic neutral amphiphile. Molecular dynamics simulations were coupled to experimental spectroscopic and X-ray scattering techniques to investigate how local coordination interactions between the metal ion and ligands in the organic phase combine with long-range interactions to produce spontaneous changes in the solvent microstructure. Extraction of the Eu(3+)-3(NO3(-)) ion pairs involves incorporation of the "hard" metal complex into the core of "soft" aggregates. This seeds the formation of reverse micelles that draw the water and "free" amphiphile into nanoscale hydrophilic domains. The reverse micelles interact through attractive van der Waals interactions and coalesce into rod-shaped polynuclear Eu(III) -containing aggregates with metal centers bridged by nitrate. These preorganized hydrophilic domains, containing high densities of O-donor ligands and anions, provide improved Eu(III) solvation environments that help drive interfacial transfer, as is reflected by the increasing Eu(III) partitioning ratios (oil/aqueous) despite the organic phase approaching saturation. For the first time, this multiscale approach links metal-ion coordination with nanoscale structure to reveal the free-energy balance that drives the phase transfer of neutral metal salts.

  5. Oligomeric rare-earth metal cluster complexes with endohedral transition metal atoms

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Simon; Zimmermann, Sina; Brühmann, Matthias; Meyer, Eva; Rustige, Christian; Wolberg, Marike; Daub, Kathrin; Bell, Thomas; Meyer, Gerd, E-mail: gerd.meyer@uni-koeln.de

    2014-11-15

    Comproportionation reactions of rare-earth metal trihalides (RX{sub 3}) with the respective rare-earth metals (R) and transition metals (T) led to the formation of 22 oligomeric R cluster halides encapsulating T, in 19 cases for the first time. The structures of these compounds were determined by single-crystal X-ray diffraction and are composed of trimers ((T{sub 3}R{sub 11})X{sub 15}-type, P6{sub 3}/m), tetramers ((T{sub 4}R{sub 16})X{sub 28}(R{sub 4}) (P-43m), (T{sub 4}R{sub 16})X{sub 20} (P4{sub 2}/nnm), (T{sub 4}R{sub 16})X{sub 24}(RX{sub 3}){sub 4} (I4{sub 1}/a) and (T{sub 4}R{sub 16})X{sub 23} (C2/m) types of structure) and pentamers ((Ru{sub 5}La{sub 14}){sub 2}Br{sub 39}, Cc) of (TR{sub r}){sub n} (n=2–5) clusters. These oligomers are further enveloped by inner (X{sup i}) as well as outer (X{sup a}) halido ligands, which possess diverse functionalities and interconnect like oligomers through i–i, i–a and/or a–i bridges. The general features of the crystal structures for these new compounds are discussed and compared to literature entries as well as different structure types with oligomeric T centered R clusters. Dimers and tetramers originating from the aggregation of (TR{sub 6}) octahedra via common edges are more frequent than trimers and pentamers, in which the (TR{sub r}) clusters share common faces. - Graphical abstract: Rare earth-metal cluster complexes with endohedral transition metal atoms (TR{sub 6}) may connect via common edges or faces to form dimers, trimers, tetramers and pentamers of which the tetramers are the most prolific. Packing effects and electron counts play an important role. - Highlights: • Rare-earth metal cluster complexes encapsulate transition metal atoms. • Oligomers are built via connection of octahedral clusters via common edges or faces. • Dimers through pentamers with closed structures are known. • Tetramers including a tetrahedron of endohedral atoms are the most prolific.

  6. Therapeutic redistribution of metal ions to treat Alzheimer's disease.

    Science.gov (United States)

    Crouch, Peter J; Barnham, Kevin J

    2012-09-18

    Currently, therapeutics that modify Alzheimer's disease (AD)are not available. Increasing age is the primary risk factor for AD and due to an aging global population the urgent need for effective therapeutics increases every year. This Account presents the development of an AD treatment strategy that incorporates diverse compounds with a common characteristic: the ability to redistribute metal ions within the brain. Central to cognitive decline in AD is the amyloid-β peptide (Aβ) that accumulates in the AD brain. A range of therapeutic strategies have been developed based on the premise that decreasing the brain Aβ burden will attenuate the severity of the disease symptoms. Unfortunately these treatments have failed to show any positive outcomes in large-scale clinical trials, raising many questions regarding whether therapeutics for AD can rely solely on decreasing Aβ levels. An alternate strategy is to target the interaction between Aβ and metal ions using compounds with the potential to redistribute metal ions within the brain. The original rationale for this strategy came from studies showing that metal ions promote Aβ toxicity and aggregation. In initial studies using the prototype metal-chelating compound clioquinol (CQ), CQ prevented Aβ toxicity in vitro, out-competed Aβ for metal ions without affecting the activity of metal-dependent enzymes, and attenuated the rate of cognitive decline in AD subjects in a small phase II clinical trial. All these outcomes were consistent with the original hypothesized mechanism of action for CQ where prevention or reversal of the extracellular Aβ-metal interactions could prevent Aβ toxicity. Soon after the completion of these studies, a new body of work began to suggest that this hypothesized mechanism of action for CQ was simplistic and that other factors were also important for the positive therapeutic outcomes. Perhaps most significantly, it was shown that after CQ sequesters metal ions the neutral CQ-metal

  7. Auger neutralization rates of multiply charged ions near metal surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Nedeljkovic, N.N.; Janev, R.K.; Lazur, V.Y.

    1988-08-15

    Transition rates for the Auger neutralization processes of multiply charged ions on metal surfaces are calculated in closed analytical form. The core potential of a multiply charged ion is represented by a pseudopotential, which accounts for the electron screening effects and allows transition to the pure Coulomb case (fully stripped ions). The relative importance of various neutralization channels in slow-ion--surface collisions is discussed for the examples of He/sup 2+/+Mo(100) and C/sup 3+/+Mo(100) collisional systems.

  8. IMF dependence of energetic oxygen and hydrogen ion distributions in the near-Earth magnetosphere

    Science.gov (United States)

    Luo, H.; Kronberg, E. A.; Nykyri, K.; Trattner, K. J.; Daly, P. W.; Chen, G. X.; Du, A. M.; Ge, Y. S.

    2017-05-01

    Energetic ion distributions in the near-Earth plasma sheet can provide important information for understanding the entry of ions into the magnetosphere and their transportation, acceleration, and losses in the near-Earth region. In this study, 11 years of energetic proton and oxygen observations (> 274 keV) from Cluster/Research with Adaptive Particle Imaging Detectors were used to statistically study the energetic ion distributions in the near-Earth region. The dawn-dusk asymmetries of the distributions in three different regions (dayside magnetosphere, near-Earth nightside plasma sheet, and tail plasma sheet) are examined in Northern and Southern Hemispheres. The results show that the energetic ion distributions are influenced by the dawn-dusk interplanetary magnetic field (IMF) direction. The enhancement of ion intensity largely correlates with the location of the magnetic reconnection at the magnetopause. The results imply that substorm-related acceleration processes in the magnetotail are not the only source of energetic ions in the dayside and the near-Earth magnetosphere. Energetic ions delivered through reconnection at the magnetopause significantly affect the energetic ion population in the magnetosphere. We also believe that the influence of the dawn-dusk IMF direction should not be neglected in models of the particle population in the magnetosphere.

  9. Metal ion complexation by ionizable crown ethers. Final report, January 1, 1988--June 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, R.A.

    1994-12-31

    During the report period a variety of new lipophilic ionizable crown ethers with pendent proton-ionizable groups has been synthesized. The ligands possess one or more ionizable group (carboxylic acid, phosphonic acid monoethyl ester, para-nitrophenol, phosphonic acid) attached to crown ether, monoazacrown ether or diazacrown ether frameworks. These novel chelating agents have either pendent or inward-facing proton-ionizable groups. Such lipophilic proton-ionizable crown ethers are designed for use in multiphase metal ion separations (solvent extraction, liquid membrane transport). In addition a series of proton-ionizable crown ethers without lipophilic groups was prepared to study how structural variations within the ligand influence metal ion complexation in homogeneous media as assessed by NMR spectroscopy or titration calorimetry. A third class of new metal ion-complexing agents is a series of lipophilic acyclic polyether dicarboxylic acids. Competitive solvent extractions of alkali metal and alkaline earth cations and of the mixed species have been conducted to reveal the influence of ring size, nature and attachment site of the lipophilic group, sidearm length, and proton-ionizable group identity and location upon the selectivity and efficiency of metal ion complexation. In addition to such studies of structural variation within the lipophilic proton-ionizable crown ether, the effect of changing the organic solvent and variation of the stripping conditions have been assessed. The influence of structural variations within lipophilic acyclic polyether dicarboxylic acids upon competitive solvent extraction of alkaline earth cations has been probed. Also a new chromogenic, di-ionizable crown ether with extremely high selectivity for Hg{sup 2+} has been discovered.

  10. Metal ions potentiate microglia responsiveness to endotoxin.

    Science.gov (United States)

    Rachmawati, Dessy; Peferoen, Laura A N; Vogel, Daphne Y S; Alsalem, Inás W A; Amor, Sandra; Bontkes, Hetty J; von Blomberg, B Mary E; Scheper, Rik J; van Hoogstraten, Ingrid M W

    2016-02-15

    Oral metal exposure has been associated with diverse adverse reactions, including neurotoxicity. We showed previously that dentally applied metals activate dendritic cells (MoDC) via TLR4 (Ni, Co, Pd) and TLR3 (Au). It is still unknown whether the low levels of dental metals reaching the brain can trigger local innate cells or prime them to become more responsive. Here we tested whether dentally applied metals (Cr, Fe, Co, Ni, Cu, Zn, Au, Hg) activate primary human microglia in vitro and, as a model, monocytic THP-1-cells, in high non-toxic as well as near-physiological concentrations. In addition the effects of 'near-physiological' metal exposure on endotoxin (LPS) responsiveness of these cells were evaluated. IL-8 and IL-6 production after 24h was used as read out. In high, non-toxic concentrations all transition metals except Cr induced IL-8 and IL-6 production in microglia, with Ni and Co providing the strongest stimulation. When using near-physiological doses (up to 10× the normal plasma concentration), only Zn and Cu induced significant IL-8 production. Of note, the latter metals also markedly potentiated LPS responsiveness of microglia and THP-1 cells. In conclusion, transition metals activate microglia similar to MoDCs. In near-physiological concentrations Zn and Cu are the most effective mediators of innate immune activation. A clear synergism between innate responses to Zn/Cu and LPS was observed, shedding new light on the possible relation between oral metal exposure and neurotoxicity.

  11. Metal ion interpretation in resurfacing versus conventional hip arthroplasty and in whole blood versus serum. How should we interpret metal ion data

    NARCIS (Netherlands)

    Smolders, J.M.; Bisseling, P.; Hol, A.; Straeten, C. Van Der; Schreurs, B.W.; Susante, J.L.C. van

    2011-01-01

    Metal ions generated from joint replacements are a cause for concern. There is no consensus on the best surrogate measure of metal ion exposure, and both serum and whole blood measurements are used in clinical practice. This study provides a guideline for interpretation of metal ion analysis in clin

  12. Metal ion interpretation in resurfacing versus conventional hip arthroplasty and in whole blood versus serum. How should we interpret metal ion data

    NARCIS (Netherlands)

    Smolders, J.M.; Bisseling, P.; Hol, A.; Straeten, C. Van Der; Schreurs, B.W.; Susante, J.L.C. van

    2011-01-01

    Metal ions generated from joint replacements are a cause for concern. There is no consensus on the best surrogate measure of metal ion exposure, and both serum and whole blood measurements are used in clinical practice. This study provides a guideline for interpretation of metal ion analysis in clin

  13. Chromosomal antioxidant genes have metal ion-specific roles as determinants of bacterial metal tolerance.

    Science.gov (United States)

    Harrison, Joe J; Tremaroli, Valentina; Stan, Michelle A; Chan, Catherine S; Vacchi-Suzzi, Caterina; Heyne, Belinda J; Parsek, Matthew R; Ceri, Howard; Turner, Raymond J

    2009-10-01

    Microbiological metal toxicity involves redox reactions between metal species and cellular molecules, and therefore, we hypothesized that antioxidant systems might be chromosomal determinants affecting the susceptibility of bacteria to metal toxicity. Here, survival was quantified in metal ion-exposed planktonic cultures of several Escherichia coli strains, each bearing a mutation in a gene important for redox homeostasis. This characterized approximately 250 gene-metal combinations and identified that sodA, sodB, gor, trxA, gshA, grxA and marR have distinct roles in safeguarding or sensitizing cells to different toxic metal ions (Cr(2)O(7)(2-), Co(2+), Cu(2+), Ag(+), Zn(2+), AsO(2)(-), SeO(3)(2-) or TeO(3)(2-)). To shed light on these observations, fluorescent sensors for reactive oxygen species (ROS) and reduced thiol (RSH) quantification were used to ascertain that different metal ions exert oxidative toxicity through disparate modes-of-action. These oxidative mechanisms of metal toxicity were categorized as involving ROS and thiol-disulfide chemistry together (AsO(2)(-), SeO(3)(2-)), ROS predominantly (Cu(2+), Cr(2)O(7)(2-)) or thiol-disulfide chemistry predominantly (Ag(+), Co(2+), Zn(2+), TeO(3)(2-)). Corresponding to this, promoter-luxCDABE fusions showed that toxic doses of different metal ions up- or downregulate the transcription of gene sets marking distinct pathways of cellular oxidative stress. Altogether, our findings suggest that different metal ions are lethal to cells through discrete pathways of oxidative biochemistry, and moreover, indicate that chromosomally encoded antioxidant systems may have metal ion-specific physiological roles as determinants of bacterial metal tolerance.

  14. Ion conducting fluoropolymer carbonates for alkali metal ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    DeSimone, Joseph M.; Pandya, Ashish; Wong, Dominica; Balsara, Nitash P.; Thelen, Jacob; Devaux, Didier

    2017-09-05

    Liquid or solid electrolyte compositions are described that comprise a homogeneous solvent system and an alkali metal salt dissolved in said solvent system. The solvent system may comprise a fluoropolymer, having one or two terminal carbonate groups covalently coupled thereto. Batteries containing such electrolyte compositions are also described.

  15. On the origins of energetic ions in the earth's dayside magnetosheath

    Science.gov (United States)

    Fuselier, S. A.; Klumpar, D. M.; Shelley, E. G.

    1991-01-01

    Energetic ion events in the earth's dayside subsolar magnetosheath (0900 - 1300 Local Time) are surveyed using data from the AMPTE/CCE Hot Plasma Composition Experiment. Ion species carrying the signature of their origin O(+) and energetic He(2+) are used to distinguish between magnetospheric and solar wind origins for the energetic ion events. The results of this survey indicate that the majority of energetic (10-17 keV/e) H(+) and He(2+) ions observed in the dayside magnetosheath are accelerated from the solar wind population. The energetic He(2+) to H(+) density ratio in the magnetosheath is consistent with that predicted from first-order Fermi acceleration of solar wind ions in the turbulent regions upstream and downstream from the earth's quasi-parallel bow shock. The simultaneous occurrence of both energetic He(2+) and magnetospheric O(+) indicates that, on occasion, both Fermi acceleration of solar wind ions and leakage of magnetospheric ions occurs in the dayside magnetosheath.

  16. Influence of inherent strain on the curie temperature of rare earth ion-doped bismuth vanadate

    OpenAIRE

    Sooryanarayana, K; Row, TNG; R. Somashekar; Varma, KBR

    1998-01-01

    X-ray line broadening is found to be an effective parameter to estimate the strain associated with rare earth ion (Gd3+)-doped polycrystalline bismuth vanadate(Bi2VO5.5). The strain increases with increasing Gd3+ concentration. It is anisotropic and found to be maximum in (111) plane. The Curie temperature which is known to decrease with increase in the rare earth ion concentration in these compounds is correlated with increase in strain.

  17. Interactions Between Metal Ions and Carbohydrates: Coordination Behavior of D-Ribose to Lanthanide Ions

    Institute of Scientific and Technical Information of China (English)

    苏允兰; 杨丽敏; 翁诗甫; 吴瑾光

    2002-01-01

    Lanthanum chloride α-D-ribopyranose pentahydrate complex was prepared and speculated its structure from the similar IR spectra of corresponding praseodymium and neodymium-D-ribose complexes, which reveal the coordination behavior of D-ribose to lanthanide ions and give us a model of the interactions between metal ions and carbohydrates.

  18. Ab Initio Molecular Dynamics Study on the Interactions between Carboxylate Ions and Metal Ions in Water.

    Science.gov (United States)

    Mehandzhiyski, Aleksandar Y; Riccardi, Enrico; van Erp, Titus S; Trinh, Thuat T; Grimes, Brian A

    2015-08-20

    The interaction between a carboxylate anion (deprotonated propanoic acid) and the divalent Mg(2+), Ca(2+), Sr(2+), Ba(2+) metal ions is studied via ab initio molecular dynamics. The main focus of the study is the selectivity of the carboxylate-metal ion interaction in aqueous solution. The interaction is modeled by explicitly accounting for the solvent molecules on a DFT level. The hydration energies of the metal ions along with their diffusion and mobility coefficients are determined and a trend correlated with their ionic radius is found. Subsequently, a series of 16 constrained molecular dynamics simulations for every ion is performed, and the interaction free energy is obtained from thermodynamic integration of the forces between the metal ion and the carboxylate ion. The results indicate that the magnesium ion interacts most strongly with the carboxylate, followed by calcium, strontium, and barium. Because the interaction free energy is not enough to explain the selectivity of the reaction observed experimentally, more detailed analysis is performed on the simulation trajectories to understand the steric changes in the reaction complex during dissociation. The solvent dynamics appear to play an important role during the dissociation of the complex and also in the observed selectivity behavior of the divalent ions.

  19. Recent advances in tailoring the aggregation of heavier alkaline earth metal halides, alkoxides and aryloxides from non-aqueous solvents.

    Science.gov (United States)

    Fromm, Katharina M

    2006-11-21

    This overview on one of the subjects treated in our group deals with the synthesis and study of low-dimensional polymer and molecular solid state structures formed with alkaline earth metal ions in non-aqueous solvents. We have chosen several synthetic approaches in order to obtain such compounds. The first concept deals with the "cutting out" of structural fragments from a solid state structure of a binary compound, which will be explained with reference to BaI2. Depending on the size and concentration of oxygen donor ligands, used as chemical scissors on BaI2, three-, two-, one- and zero-dimensional derived adducts of BaI2 are obtained, comparable to a structural genealogy tree for BaI2. A second part deals with the supramolecular approach for the synthesis of low dimensional polymeric compounds based on alkaline earth metal iodides, obtained by the combination of metal ion coordination with hydrogen bonding between the cationic complexes and their anions. Certain circumstances allow rules to be established for the prediction of the dimensionality of a given compound, contributing to the fundamental problem of structure prediction in crystal engineering. A third section describes a synthetic approach for generating pure alkaline earth metal cage compounds as well as alkali and alkaline earth mixed metal clusters. A first step deals with different molecular solvated alkaline earth metal iodides which are investigated as a function of the ligand size in non-aqueous solvents. These are then reacted with some alkali metal compound in order to partially or totally eliminate alkali iodide and to form the targeted clusters. These unique structures of ligand stabilized metal halide, hydroxide and/or alkoxide and aryloxide aggregates are of interest as potential precursors for oxide materials and as catalysts. Approaches to two synthetic methods of the latter, sol-gel and (MO)CVD (metal-organic chemical vapour deposition), are investigated with some of our compounds. (D

  20. Coordination of alkaline earth metal ions in the inverted cucurbit[7]uril supramolecular assemblies formed in the presence of [ZnCl4]2- and [CdCl4]2-.

    Science.gov (United States)

    Li, Qing; Zhang, Yun-Qian; Zhu, Qian-Jiang; Xue, Sai-Feng; Tao, Zhu; Xiao, Xin

    2015-05-01

    A convenient method to isolate inverted cucurbit[7]uril (iQ[7]) from a mixture of water-soluble Q[n]s was established by eluting the soluble mixture of Q[n]s on a Dowex (H(+) form) column so that iQ[7] could be selected as a ligand for coordination and supramolecular assembly with alkaline earth cations (AE(2+)) in aqueous HCl solutions in the presence of [ZnCl(4)](2-) and [CdCl(4)](2-) anions as structure-directing agents. Single-crystal X-ray diffraction analysis revealed that both iQ[7]-AE(2+) -[ZnCl(4)](2-) -HCl and iQ[7]-AE(2+) -[CdCl(4)](2-) -HCl interaction systems yielded supramolecular assemblies, in which the [ZnCl(4)](2-) and [CdCl(4)](2-) anions presented a honeycomb effect, and this resulted in the formation of linear iQ[7]/AE(2+) coordination polymers through outer-surface interactions of Q[n]s.

  1. Reducing hazardous heavy metal ions using mangium bark waste.

    Science.gov (United States)

    Khabibi, Jauhar; Syafii, Wasrin; Sari, Rita Kartika

    2016-08-01

    The objective of this study was to evaluate the characteristics of mangium bark and its biosorbent ability to reduce heavy metal ions in standard solutions and wastewater and to assess changes in bark characteristics after heavy metal absorption. The experiments were conducted to determine heavy metal absorption from solutions of heavy metals alone and in mixtures as well as from wastewater. The results show that mangium bark can absorb heavy metals. Absorption percentages and capacities from single heavy metal solutions showed that Cu(2+) > Ni(2+) > Pb(2+) > Hg(2+), while those from mixture solutions showed that Hg(2+) > Cu(2+) > Pb(2+) > Ni(2+). Wastewater from gold mining only contained Cu, with an absorption percentage and capacity of 42.87 % and 0.75 mg/g, respectively. The highest absorption percentage and capacity of 92.77 % and 5.18 mg/g, respectively, were found for Hg(2+) in a mixture solution and Cu(2+) in single-metal solution. The Cu(2+) absorption process in a single-metal solution changed the biosorbent characteristics of the mangium bark, yielding a decreased crystalline fraction; changed transmittance on hydroxyl, carboxyl, and carbonyl groups; and increased the presence of Cu. In conclusion, mangium bark biosorbent can reduce hazardous heavy metal ions in both standard solutions and wastewater.

  2. Low coefficient of thermal expansion polyimides containing metal ion additives

    Science.gov (United States)

    Stoakley, D. M.; St. Clair, A. K.

    1992-01-01

    Polyimides have become widely used as high performance polymers as a result of their excellent thermal stability and toughness. However, lowering their coefficient of thermal expansion (CTE) would increase their usefulness for aerospace and electronic applications where dimensional stability is a requirement. The incorporation of metal ion-containing additives into polyimides, resulting in significantly lowered CTE's, has been studied. Various metal ion additives have been added to both polyamic acid resins and soluble polyimide solutions in the concentration range of 4-23 weight percent. The incorporation of these metal ions has resulted in reductions in the CTE's of the control polyimides of 12 percent to over 100 percent depending on the choice of additive and its concentration.

  3. Sensitive Determination of DNA by RLS Enhancement of Metal Ions

    Institute of Scientific and Technical Information of China (English)

    Huang Jian-ping; Chen Fang; Ai Xin-ping; He Zhi-ke

    2004-01-01

    The interactions between metal ions and DNA have been studied by the resonance light scattering (RLS) spectra. In the acidic condition, the RLS signals of metal ions, especially the transition metal ions in group ⅠB and ⅡB, were increased by DNA. And it is found that the enhancement of RLS signals is linear to the concentration of DNA, so the RLS method for DNA determination was proposed in the presence of Cu2+. On the optimum conditions, the linear range and the detect limit of ctDNA is 4×10-8-4×10-6 g·5mL-1 and 1.13×10-8 g·5mL-1, respectively. The proposed method is successfully applied to determine the extracted plasmid DNA of Bacillus subtilis DB104.

  4. Structures of rare earth-transition metal rich compounds derived from CaCu5 type

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The properties of materials have a close connect ion to their crystal structures. Rare earth (R)-transition metal (T) rich compo und are the focus of investigation in the search for new hard magnetic materials . As the basis for the study of stabilized effect of the third component on the fo rmation of RT5 derivative and its influence of the occupied sites on magnetic properties, in this paper, the possible derivative compounds based on the RT5 primitive unit cell of the CaCu5 structure type formed through the ordered or disordered substitution of dumbbell pair 2T atoms for the R atoms at some sit es, and the structural relationship between the derivatives and the prototype ar e summarized.

  5. Determination of Some Heavy-metal-ions Using a Sulfur Ion Modified BZ Oscillating System

    Institute of Scientific and Technical Information of China (English)

    Hua CHEN; Wu YANG; Hong Xia DAI; Xiao Xia WEI; Jie QU; Jin Zhang GAO

    2006-01-01

    A highly sensitive method is developed for the determination of trace amounts of some heavy metal ions in aqueous solution based on the classical Belousov-Zhabotinskii (BZ) oscillating chemical system. Introducing of S2- ion makes the new oscillating system Ce(SO4)2 - KBrO3-CH2(COOH)2 - Na2S - H2SO4 have to a high sensitivity for some heavy metal ions such as Ag+,pb2+, Hg2+, Cd2+, Cu2+and Bi3+ with detection limits down to 10-12 mol. L-1.

  6. Binding of alkali metal ions by cyclic polyethers: significance in ion transport processes.

    Science.gov (United States)

    Izatt, R M; Rytting, J H; Nelson, D P; Haymore, B L; Christensen, J J

    1969-04-25

    Values for the formation constant (log K), the change in enthalpy (triangle upH degrees ), and the change in entropy (triangle upS degrees ) have been determined for the interaction of lithium, sodium, potassium, rubidium, and cesium ions with the two isomers of the cyclic polyether, 2,5,8,15,18,21-hexaoxatricyclo[20.4.0.0(9,14)] hexacosane. The stability order of these metal ions with either isomer is identical to the permeability order for these same metal ions with the structurally related antibiotics, valinomycin and monactin.

  7. Rare-earth metal prices in the USA ca. 1960 to 1994

    Science.gov (United States)

    Hedrick, James B.

    1997-01-01

    Rare-earth metal prices were compiled from the late 1950s and early 1960s through 1994. Although commercial demand for rare-earth metals began in 1908, as the alloy mischmetal, commercial quantities of a wide range of individual rare-earth metals were not available until the late 1950s. The discovery of a large, high-grade rare-earth deposit at Mountain Pass. CA, USA, in 1949, was significant because it led to the production of commercial quantities or rare-earth elements that reduced prices and encouraged wider application of the materials. The availability of ore from Mountain Pass, and other large rare-earth deposits, especially those in Australia and China, has provided the world with abundant resources for rare-earth metal production. This availability, coupled with improved technology from Government and private-sector metallurgical research, has resulted in substantial decreases in rare-earth metal prices since the late 1950s and early 1960s. Price series for the individual rare-earth metals (except promethium) are quoted on a kilogram basis from the late 1950s and early 1960s through 1994. Prices are given in US dollars on an actual and constant dollar basis. Industrial and economic factors affecting prices during this time period are examined.

  8. Nano sized carbonized waste biomass for heavy metal ion remediation

    Directory of Open Access Journals (Sweden)

    Mahajan Garima

    2014-12-01

    Full Text Available Utilization of agricultural waste material with approach to enhance the heavy metal remediation properties by carbonizing the biomass at nano size particles has been explored in present investigation from aqueous solutions. In this study the lignocellulosic, nitrogenous agricultural waste biomass Delbergia sissoo pods (DSP has been tried for sequestering of Cd (II, Pb (II and Ni (II metal ions from aqueous solutions. Batch experiments were performed for removal of targeted metal ions keeping in consideration the preliminary affecting parameters such as effect of adsorption dose, pH, initial metal ion concentration, stirring speed and contact time. The sorption studies were analyzed by using, Freundlic isotherm and Langmuir isotherm models. The kinetics of the process was evaluated by pseudo pseudo-first order and pseudo second order kinetic models. Studies reveal that the equilibrium was achieved with in 30 min of the contact time at optimized parameters. Analytical studies of biosorbent were done by means of FT-IR, SEM and XRD. Desorption experiments were carried out using HCl solution with a view to regenerate the spent adsorbent and to recover the adsorbed metal ions.

  9. Effect of Rare Earth Elements on Exchange Performances of Cesium Ion-Sieve

    Institute of Scientific and Technical Information of China (English)

    张惠源; 王榕树; 林灿生; 张先业

    2003-01-01

    The exchange performances and the distribution coefficient of Cesium Ion-Sieve (Cs-IS) for cesium and for some rare earth elements were compared. In particular, the effects of neodymium on the cesium ion exchange and the Cs+ selectivity variation on Cs-IS owing to introduction of rare earth elements into HLLW were studied. Though rare earth elements exhibit a small influence on the distribution coefficient for Cs+, they impair Cs-exchange capacity of Cs-IS to some extent. This interruption on the selectivity to Cs+ can be significantly eliminated provided an appropriate ratio of liquid to solid V:m is used.

  10. Smart responsive microcapsules capable of recognizing heavy metal ions.

    Science.gov (United States)

    Pi, Shuo-Wei; Ju, Xiao-Jie; Wu, Han-Guang; Xie, Rui; Chu, Liang-Yin

    2010-09-15

    Smart responsive microcapsules capable of recognizing heavy metal ions are successfully prepared with oil-in-water-in-oil double emulsions as templates for polymerization in this study. The microcapsules are featured with thin poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (P(NIPAM-co-BCAm)) membranes, and they can selectively recognize special heavy metal ions such as barium(II) or lead(II) ions very well due to the "host-guest" complexation between the BCAm receptors and barium(II) or lead(II) ions. The stable BCAm/Ba(2+) or BCAm/Pb(2+) complexes in the P(NIPAM-co-BCAm) membrane cause a positive shift of the volume phase transition temperature of the crosslinked P(NIPAM-co-BCAm) hydrogel to a higher temperature, and the repulsion among the charged BCAm/Ba(2+) or BCAm/Pb(2+) complexes and the osmotic pressure within the P(NIPAM-co-BCAm) membranes result in the swelling of microcapsules. Induced by recognizing barium(II) or lead(II) ions, the prepared microcapsules with P(NIPAM-co-BCAm) membranes exhibit isothermal and significant swelling not only in outer and inner diameters but also in the membrane thickness. The proposed microcapsules in this study are highly attractive for developing smart sensors and/or carriers for detection and/or elimination of heavy metal ions.

  11. Metal-Ion Additives Reduce Thermal Expansion Of Polyimides

    Science.gov (United States)

    Stoakley, Diane M.; St. Clair, Anne K.; Emerson, Burt R., Jr.; Willis, George L.

    1994-01-01

    Polyimides widely used as high-performance polymers because of their excellent thermal stability and toughness. However, their coefficients of thermal expansion (CTE's) greater than those of metals, ceramics, and glasses. Decreasing CTE's of polyimides increase usefulness for aerospace and electronics applications in which dimensional stability required. Additives containing metal ions reduce coefficients of thermal expansion of polyimides. Reductions range from 11 to over 100 percent.

  12. Removal and recovery of toxic metal ions from aqueous waste sites using polymer pendant ligands

    Energy Technology Data Exchange (ETDEWEB)

    Fish, D. [Lawrence Berkeley National Lab., CA (United States)

    1996-10-01

    The purpose of this project is to investigate the use of polymer pendant ligand technology to remove and recover toxic metal ions from DOE aqueous waste sites. Polymer pendant lgiands are organic ligands, anchored to crosslinked, modified divinylbenzene-polystyrene beads, that can selectively complex metal ions. The metal ion removal step usually occurs through a complexation or ion exchange phenomena, thus recovery of the metal ions and reuse of the beads is readily accomplished.

  13. Metal ions and RNA folding: a highly charged topic with a dynamic future.

    Science.gov (United States)

    Woodson, Sarah A

    2005-04-01

    Metal ions are required to stabilize RNA tertiary structure and to begin the folding process. How different metal ions enable RNAs to fold depends on the electrostatic potential of the RNA and correlated fluctuations in the positions of the ions themselves. Theoretical models, fluorescence spectroscopy, small angle scattering and structural biology reveal that metal ions alter the RNA dynamics and folding transition states. Specifically coordinated divalent metal ions mediate conformational rearrangements within ribozyme active sites.

  14. A study of the formation and dynamics of the Earth's plasma sheet using ion composition data

    Science.gov (United States)

    Lennartsson, O. W.

    1994-01-01

    Over two years of data from the Lockheed Plasma Composition Experiment on the ISEE 1 spacecraft, covering ion energies between 100 eV/e and about 16 keV/e, have been analyzed in an attempt to extract new information about three geophysical issues: (1) solar wind penetration of the Earth's magnetic tail; (2) relationship between plasma sheet and tail lobe ion composition; and (3) possible effects of heavy terrestrial ions on plasma sheet stability.

  15. Nondestructive photon detection using a single rare-earth ion coupled to a photonic cavity

    Science.gov (United States)

    O'Brien, Chris; Zhong, Tian; Faraon, Andrei; Simon, Christoph

    2016-10-01

    We study the possibility of using single rare-earth ions coupled to a photonic cavity with high cooperativity for performing nondestructive measurements of photons, which would be useful for global quantum networks and photonic quantum computing. We calculate the achievable fidelity as a function of the parameters of the rare-earth ion and photonic cavity, which include the ion's optical and spin dephasing rates, the cavity linewidth, the single-photon coupling to the cavity, and the detection efficiency. We suggest a promising experimental realization using current state-of-the-art technology in Nd:YVO4.

  16. IMF dependence of energetic oxygen and hydrogen ion distributions in the near-Earth plasma sheet

    Science.gov (United States)

    Luo, Hao; Kronberg, Elena; Nykyri, Katariina; Daly, Patrick; Chen, Gengxiong; Du, Aimin; Ge, Yasong

    2017-04-01

    Energetic ion distributions in the near-Earth plasma sheet can provide important information for understanding the entry of ions into the magnetosphere, and their transportation, acceleration, and losses in the near-Earth region. In this study, 11 years of energetic proton and oxygen observations (> 100 keV) from Cluster/RAPID were used to statistically study the energetic ion distributions in the near-Earth region. The dawn-dusk asymmetries of the distributions in three different regions (dayside magnetosphere, near-Earth nightside plasma sheet, and tail plasma sheet) are examined in northern and southern hemispheres. The results show that the energetic ion distributions are influenced by the dawn-dusk IMF direction. The enhancement of intensity largely correlates with the location of the magnetic reconnection at the magnetopause and the consequent formation of a diamagnetic cavity in the same quadrant of the magnetosphere. The results imply that substorm-related processes in the magnetotail are not the only source of energetic ions in the dayside and the near-Earth plasma sheet. We propose that large-scale cusp diamagnetic cavities can be an additional source and can thus significantly affect the energetic ion population in the magnetosphere. We also believe that the influence of the dawn-dusk IMF direction should not be neglected in models of the particle population in the magnetosphere.

  17. Formation of Metal-Related Ions in Matrix-Assisted Laser Desorption Ionization

    Science.gov (United States)

    Lee, Chuping; Lu, I.-Chung; Hsu, Hsu Chen; Lin, Hou-Yu; Liang, Sheng-Ping; Lee, Yuan-Tseh; Ni, Chi-Kung

    2016-09-01

    In a study of the metal-related ion generation mechanism in matrix-assisted laser desorption ionization (MALDI), crystals of matrix used in MALDI were grown from matrix- and salt-containing solutions. The intensities of metal ion and metal adducts of the matrix ion obtained from unwashed crystals were higher than those from crystals washed with deionized water, indicating that metal ions and metal adducts of the matrix ions are mainly generated from the surface of crystals. The contributions of preformed metal ions and metal adducts of the matrix ions inside the matrix crystals were minor. Metal adducts of the matrix and analyte ion intensities generated from a mixture of dried matrix, salt, and analyte powders were similar to or higher than those generated from the powder of dried droplet crystals, indicating that the contributions of the preformed metal adducts of the matrix and analyte ions were insignificant. Correlation between metal-related ion intensity fluctuation and protonated ion intensity fluctuation was observed, indicating that the generation mechanism of the metal-related ions is similar to that of the protonated ions. Because the thermally induced proton transfer model effectively describes the generation of the protonated ions, we suggest that metal-related ions are mainly generated from the salt dissolution in the matrix melted by the laser.

  18. Metal ion release from electric guitar strings in artificial sweat

    Energy Technology Data Exchange (ETDEWEB)

    Rezic, Iva [Department of Applied Chemistry, Faculty of Textile Technology, University of Zagreb, Prilaz Baruna Filipovica 28a, 10000 Zagreb (Croatia)], E-mail: iva_rezic@net.hr; Curkovic, Lidija [Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb (Croatia); Ujevic, Magdalena [Croatian Institute of Public Health, Zagreb, Croatia (Croatia)

    2009-09-15

    The aim of this study was to monitor the dissolution of metal ions from electric guitar strings. For characterization of investigated strings, two independent methods of analysis were chosen: ICP-OES and AAS. Electric guitar strings consisted of two separate parts: Sn-plated steel core wire which was hexagonal in cross section and Ni-plated steel wrap which was round in cross section. Dissolution of Ni{sup 2+}, Mn{sup 2+}, Si{sup 4+}, Sn{sup 2+} and Fe{sup 3+} ions from electric guitar strings E6 and D4 were measured as a function of time in artificial sweat solution, at temperature of 37 deg. C according to the EN 1811:1999 standard test procedure. The determination of the amount of the metal ions released in the corrosive solutions was carried out by means of inductively coupled plasma-optical emission spectroscopy (ICP-OES). The mechanism of metal ions eluted in artificial sweat is discussed. The concentrations of dissolved metal ions in corrosive solution from E6 and D4 strings are decreasing in the following order: Fe{sup 3+} > Sn{sup 2+} > Mn{sup 2+} > Si{sup 4+} > Ni{sup 2+}. Among all investigated metal ions, nickel is far the most allergenic. Since the amounts of the eluted Ni{sup 2+} did not exceed 0.5 {mu}g cm{sup -2} week{sup -1}, the investigated electric guitar strings should not induce contact dermatitis.

  19. Effect of upward ion on field-aligned currents in the near-earth magnetotail

    Institute of Scientific and Technical Information of China (English)

    ZHANG; LingQian; LIU; ZhenXing; MA; ZhiWei; SHEN; Chao; ZHOU; XuZhi; ZHANG; XianGuo

    2007-01-01

    A 3-dimensional resistive MHD simulation was carried out to study the effect of the upward ions on the field-aligned currents (FACs) in the near-earth magnetotail. The simulation results show that the up-flow ions originating from the nightside auroral oval would drift into the center plasma sheet along the magnetic field lines in the plasma sheet boundary, and have an important effect on the field-aligned currents. The main conclusions include that: 1) the upward-ions mainly affect the field- aligned currents in the near-earth magnetotail (inside 15 Re); 2) the generated FACs in the near-earth region have two types, i.e., Region 1 FAC in the high-latitude and Region 2 FAC in the low-latitude; 3) FACs increase with the enhancement of the upward ion flux; 4) with the same flux of the upward ions, FACs enhance with the increase of the velocity of the up-flow ions; 5) the intensification of FACs is also closely related with the latitude of the upward ions, and the ions from the closed field line region generate larger FACs; 6) the generation of FACs is closely related with By created by the upward ions.

  20. Synthesis of rare earth metal-organic frameworks (Ln-MOFs) and their properties of adsorption desulfurization

    Institute of Scientific and Technical Information of China (English)

    刘想; 王景艳; 李庆远; 蒋赛; 张天浩; 季生福

    2014-01-01

    The rare earth metal-organic frameworks (Ln-MOFs) materials, Ln(BTC)(H2O)·(DMF), were synthesized using the rare earth metal (Ln=Sm, Eu, Tb, Y) and 1,3,5-trimesic acid (BTC) as a metal ion center and ligand, respectively. X-ray diffraction (XRD) and infrared spectroscopy (FT-IR) were employed to characterize the Ln-MOFs structural features. The property of adsorption desul-furization of Ln-MOFs materials was evaluated with thiophene/n-octane as model oil. The results showed that Ln-MOFs with rare earth metals Sm, Eu, Tb and Y had perfect crystalline and good adsorption desulfurization ability. Y(BTC)(H2O)·(DMF) material had a comparatively better activity for the adsorption desulfurization with desulfurization rate up to 80.7%and the sulfur adsorption ca-pacity was found 30.7 mgS/g(Y-MOFs). The Ln-MOFs materials had excellent reusability.

  1. Synthesis of monomeric and polymeric alkali and alkaline earth metal complexes using a phosphinoselenoic amide ligand in metal coordination sphere

    Indian Academy of Sciences (India)

    Jayeeta Bhattacharjee; Ravi K Kottalanka; Harinath Adimulam; Tarun K Panda

    2014-09-01

    We report the monomeric complexes of magnesium and calcium of composition [M(THF){2-Ph2P(Se)N(CMe3)}2] [M= Mg (3), n = 1 andM = Ca (4), n = 2)] and polymeric complexes of potassium and barium of composition [K(THF)2{Ph2P(Se)N(CMe3)}] (2) and [K(THF)Ba{Ph2P(Se)N(CMe3)}3](5) respectively. The potassium complex 2 was readily prepared by the reaction of potassium bis(trimethylsilyl)amide with phosphinoselenoic amide ligand (1) at ambient temperature. The calcium complex 4 was prepared by two synthetic routes: in the first method, commonly known as salt metathesis reaction, the potassium complex 2 was made to react with alkaline earth metal diiodide at room temperature to afford the corresponding calcium complex. The metal bis(trimethylsilyl)amides were made to react with protic ligand 1 in the second method to eliminate the volatile bis(trimethyl)silyl amine. The magnesium complex 3 and barium complex 5 were prepared only through the first method. Solid-state structures of all the new complexes were established by single crystal X-ray diffraction analysis. The smaller ionic radii of Mg2+ (0.72Å) and Ca2+ (0.99Å) ions form the monomeric complex, whereas the larger ions K+ (1.38Å) and Ba2+ (1.35Å) were found to form onedimensional polymeric complexes with monoanionic ligand 1. Compound 2 serves an example of magnesium complex with a Mg-Se direct bond.

  2. Transferred hyperfine interaction between the rare-earth ions and the fluorine nuclei in rare-earth trifluorides

    DEFF Research Database (Denmark)

    Hansen, P. E.; Nevald, Rolf; Guggenheim, H. G.

    1978-01-01

    The isotropic and anisotropic transferred hyperfine interactions between F ions in the two chemically inequivalent sites and the rare-earth ions (R) have been derived from 19F NMR measurements in the temperature region 100-300 K on single crystals of TbF3 and DyF3. The isotropic interactions...... are found to be negative and constant in this temperature region and with the numerical values decreasing slightly from TbF3 to DyF3. The anisotropic interactions, when the point dipole contributions are subtracted, are found to be substantially smaller and about equal for the two materials. The crystals...

  3. Chromium and cobalt ion concentrations in blood and serum following various types of metal-on-metal hip arthroplasties

    DEFF Research Database (Denmark)

    Jantzen, Christopher; Jørgensen, Henrik L; Duus, Benn R

    2013-01-01

    Widely different metal ion concentrations in blood and serum have been reported with metal-on-metal (MoM) implants. We reviewed the literature on blood and serum ion concentrations of chromium (Cr) and cobalt (Co) following various MoM hip arthroplasties.......Widely different metal ion concentrations in blood and serum have been reported with metal-on-metal (MoM) implants. We reviewed the literature on blood and serum ion concentrations of chromium (Cr) and cobalt (Co) following various MoM hip arthroplasties....

  4. Neutralization by metal ions of the toxicity of sodium selenide.

    Directory of Open Access Journals (Sweden)

    Marc Dauplais

    Full Text Available Inert metal-selenide colloids are found in animals. They are believed to afford cross-protection against the toxicities of both metals and selenocompounds. Here, the toxicities of metal salt and sodium selenide mixtures were systematically studied using the death rate of Saccharomyces cerevisiae cells as an indicator. In parallel, the abilities of these mixtures to produce colloids were assessed. Studied metal cations could be classified in three groups: (i metal ions that protect cells against selenium toxicity and form insoluble colloids with selenide (Ag⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺ and Zn²⁺, (ii metal ions which protect cells by producing insoluble metal-selenide complexes and by catalyzing hydrogen selenide oxidation in the presence of dioxygen (Co²⁺ and Ni²⁺ and, finally, (iii metal ions which do not afford protection and do not interact (Ca²⁺, Mg²⁺, Mn²⁺ or weakly interact (Fe²⁺ with selenide under the assayed conditions. When occurring, the insoluble complexes formed from divalent metal ions and selenide contained equimolar amounts of metal and selenium atoms. With the monovalent silver ion, the complex contained two silver atoms per selenium atom. Next, because selenides are compounds prone to oxidation, the stabilities of the above colloids were evaluated under oxidizing conditions. 5,5'-dithiobis-(2-nitrobenzoic acid (DTNB, the reduction of which can be optically followed, was used to promote selenide oxidation. Complexes with cadmium, copper, lead, mercury or silver resisted dissolution by DTNB treatment over several hours. With nickel and cobalt, partial oxidation by DTNB occurred. On the other hand, when starting from ZnSe or FeSe complexes, full decompositions were obtained within a few tens of minutes. The above properties possibly explain why ZnSe and FeSe nanoparticles were not detected in animals exposed to selenocompounds.

  5. Solvent Extraction of Alkaline Earth Metals with Alkylphosphorus Acids%有机磷(膦)酸对碱土金属的萃取

    Institute of Scientific and Technical Information of China (English)

    许新; 朱屯

    2002-01-01

    Solvent extraction equilibria of four main alkaline earth metals (magnesium, calcium, strontium and barium) with di(2-ethylhexyl) phosphoric acid (DEHPA), 2-ethylhexyl phosphonic acid mono-(2-ethylhexyl) ester,di(2,4,4-tri-methylpentyl) phosphinic acid and IR spectra of the extracts have been studied. The selectivity order is dependent on the e/r value and hydration energy of the metal ions. The minor shift of the P-O in IR absorption of the alkaline earth metal extracts indicates that the interaction between the metal ions and P-O is much weaker for alkaline earth metals than for transitional metals. The distribution of the four alkaline earth elements between aqueous solutions and solutions of DEHPA and neutral organophosphorus compounds, tri-n-butyl phosphate (TBP) or tri-octyl phosphine oxide (TOPO) in kerosene have been determined at varying ratio of TBP or TOPO to DEHPA and the positive synergism is observed. The synergic effect is explained by using IR spectra of the loaded organic phase.

  6. Metal ion levels and revision rates in metal-on-metal hip resurfacing arthroplasty: a comparative study.

    Science.gov (United States)

    Robinson, Patrick G; Wilkinson, Andrew J; Meek, Robert M D

    2014-01-01

    Metal-on-metal (MoM) bearings in hip surgery are related to increased blood levels of metal ions. The nature of the relationship between ion levels and failure is still not fully understood. This study compares three cohorts of patients, 120 patients in each cohort, treated with a hip resurfacing arthroplasty, grouped by brand and diameter of femoral component on average four years postoperatively: Birmingham Hip Resurfacing ≥50 mm, Durom resurfacing ≥50 mm and Durom resurfacing resurfacing than the other two cohorts (P<0.05). The large BHR and large Durom HRA had revision rates of 3.3%. The small Durom HRA had a revision rate of 8.3%. Elevated blood ion levels can indicate a failing MoM bearing. The large BHR and large Durom HRA have similar revision rates yet the large Durom HRA had significantly lower metal ion levels. When similar ion levels were reported for BHR and small Durom the latter had significantly higher revision rates. This suggests ion levels do not absolutely predict the rate of HRA failure. Since MoM generation of metal ions is not the sole reason of failure, regular clinical and radiographic follow-up should also be in place for patients with these joints.

  7. Molecular design of the microbial cell surface toward the recovery of metal ions.

    Science.gov (United States)

    Kuroda, Kouichi; Ueda, Mitsuyoshi

    2011-06-01

    The genetic engineering of microorganisms to adsorb metal ions is an attractive method to facilitate the environmental cleanup of metal pollution and to enrich the recovery of metal ions such as rare metal ions. For the recovery of metal ions by microorganisms, cell surface design is an effective strategy for the molecular breeding of bioadsorbents as an alternative to intracellular accumulation. The cell surface display of known metal-binding proteins/peptides and the molecular design of novel metal-binding proteins/peptides have been performed using a cell surface engineering approach. The adsorption of specific metal ions is the important challenge for the practical recovery of metal ions. In this paper, we discuss the recent progress in surface-engineered bioadsorbents for the recovery of metal ions. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Stripping chronopotentiometry for metal ion speciation analysis at a microelectrode

    NARCIS (Netherlands)

    Leeuwen, van H.P.; Town, R.

    2002-01-01

    The features of metal ion speciation determination by stripping chronopotentiometry (SCP) at a microelectrode are examined and compared with those of DP-SV. SCP measurements are essentially of a steady-state nature under experimentally achievable conditions and correspond to practically complete

  9. Stripping chronopotentiometry for metal ion speciation analysis at a microelectrode

    NARCIS (Netherlands)

    Leeuwen, van H.P.; Town, R.

    2002-01-01

    The features of metal ion speciation determination by stripping chronopotentiometry (SCP) at a microelectrode are examined and compared with those of DP-SV. SCP measurements are essentially of a steady-state nature under experimentally achievable conditions and correspond to practically complete dep

  10. Investigation of metal ion accumulation in Euglena gracilis by fluorescence methods

    Science.gov (United States)

    Shen, H.; Ren, Q. G.; Mi, Y.; Shi, X. F.; Yao, H. Y.; Jin, C. Z.; Huang, Y. Y.; He, W.; Zhang, J.; Liu, B.

    2002-04-01

    Single cell synchrotron X-ray fluorescence (SXRF) microprobe measurements as well as X-ray absorption near edge structure experiments have been done at Beijing Synchrotron Radiation Facility on Euglena Gracilis cells. Concentrations of the metal ions Mn 2+, Nd 3+, Ce 3+ and other trace elements, such as Ca, Fe, Zn, etc. have been measured both by single cell SXRF and bulk PIXE technique. It was found that the content of Ca, Fe and Zn was lower after the uptake of rare earths or Mn by the cells, while the valence states of Mn 2+, Ce 3+ and Nd 3+ were unaltered. The results related to cytochemistry are also discussed.

  11. Removal of toxic metal ions with magnetic hydrogels.

    Science.gov (United States)

    Ozay, Ozgur; Ekici, Sema; Baran, Yakup; Aktas, Nahit; Sahiner, Nurettin

    2009-09-01

    Hydrogels, based on 2-acrylamido-2-methyl-1-propansulfonic acid (AMPS) were synthesized via photopolymerization technique and used for the preparation of magnetic responsive composite hydrogels. These composite hydrogels with magnetic properties were further utilized for the removal of toxic metal ions such as Cd(II), Co(II), Fe(II), Pb(II), Ni(II), Cu(II) and Cr(III) from aqueous environments. It was revealed that hydrogel networks with magnetic properties can effectively be utilized in the removal of pollutants. The results verified that magnetic iron particle containing p(AMPS) hydrogel networks provide advantageous over conventional techniques. Langmuir and Freundlich adsorption isotherms were applied for toxic metal removal and both isotherms were fit reasonably well for the metal ion absorptions.

  12. Local order around rare earth ions during the devitrification of oxyfluoride glasses.

    Science.gov (United States)

    Silva, Maurício A P; Dantelle, Geraldine; Mortier, Michel; Monteil, André; Ribeiro, Sidney J L; Messaddeq, Younès; Briois, Valérie; Poulain, Marcel

    2008-06-28

    Erbium L(3)-edge extended x-ray absorption fine structure (EXAFS) measurements were performed on rare earth doped fluorosilicate and fluoroborate glasses and glass ceramics. The well known nucleating effects of erbium ions for the crystallization of cubic lead fluoride (based on x-ray diffraction measurements) and the fact that the rare earth ions are present in the crystalline phase (as indicated by Er(3+) emission spectra) seem in contradiction with the present EXAFS analysis, which indicates a lack of medium range structural ordering around the Er(3+) ions and suggests that the lead fluoride crystallization does not occur in the nearest neighbor distance of the rare earth ion. Molecular dynamics simulations of the devitrification process of a lead fluoride glass doped with Er(3+) ions were performed, and results indicate that Er(3+) ions lower the devitrification temperature of PbF(2), in good agreement with the experimental results. The genuine role of Er(3+) ions in the devitrification process of PbF(2) has been investigated. Although Er(3+) ions could indeed act as seeds for crystallization, as experiments suggest, molecular dynamics simulation results corroborate the experimental EXAFS observation that the devitrification does not occur at its nearest neighbor distance.

  13. Chitosan removes toxic heavy metal ions from cigarette mainstream smoke

    Science.gov (United States)

    Zhou, Wen; Xu, Ying; Wang, Dongfeng; Zhou, Shilu

    2013-09-01

    This study investigated the removal of heavy metal ions from cigarette mainstream smoke using chitosan. Chitosan of various deacetylation degrees and molecular weights were manually added to cigarette filters in different dosages. The mainstream smoke particulate matter was collected by a Cambridge filter pad, digested by a microwave digestor, and then analyzed for contents of heavy metal ions, including As(III/V), Pb(II), Cd(II), Cr(III/VI) and Ni(II), by graphite furnace atomic absorption spectrometry (GFAAS). The results showed that chitosan had a removal effect on Pb(II), Cd(II), Cr(III/VI) and Ni(II). Of these, the percent removal of Ni(II) was elevated with an increasing dosage of chitosan. Chitosan of a high deace tylation degree exhibited good binding performance toward Cd(II), Cr(III/VI) and Ni(II), though with poor efficiency for Pb(II). Except As(III/V), all the tested metal ions showed similar tendencies in the growing contents with an increasing chitosan molecular weight. Nonetheless, the percent removal of Cr(III/VI) peaked with a chitosan molecular weight of 200 kDa, followed by a dramatic decrease with an increasing chitosan molecular weight. Generally, chitosan had different removal effects on four out of five tested metal ions, and the percent removal of Cd(II), Pb(II), Cr(III/VI) and Ni(II) was approximately 55%, 45%, 50%, and 16%, respectively. In a word, chitosan used in cigarette filter can remove toxic heavy metal ions in the mainstream smoke, improve cigarette safety, and reduce the harm to smokers.

  14. Chitosan Removes Toxic Heavy Metal Ions from Cigarette Mainstream Smoke

    Institute of Scientific and Technical Information of China (English)

    ZHOU Wen; XU Ying; WANG Dongfeng; ZHOU Shilu

    2013-01-01

    This study investigated the removal of heavy metal ions from cigarette mainstream smoke using chitosan.Chitosan of various deacetylation degrees and molecular weights were manually added to cigarette filters in different dosages.The mainstream smoke particulate matter was collected by a Cambridge filter pad,digested by a microwave digestor,and then analyzed for contents of heavy metal ions,including As(Ⅲ/Ⅴ),Pb(Ⅱ),Cd(Ⅱ),Cr(Ⅲ/Ⅵ) and Ni(Ⅱ),by graphite furnace atomic absorption spectrometry (GFAAS).The results showed that chitosan had a removal effect on Pb(Ⅱ),Cd(Ⅱ),Cr(Ⅲ/Ⅵ) and Ni(Ⅱ).Of these,the percent removal of Ni(Ⅱ) was elevated with an increasing dosage of chitosan.Chitosan of a high deace tylation degree exhibited good binding performance toward Cd(Ⅱ),Cr(Ⅲ/Ⅵ) and Ni(Ⅱ),though with poor efficiency for Pb(Ⅱ).Except As(Ⅲ/Ⅴ),all the tested metal ions showed similar tendencies in the growing contents with an increasing chitosan molecular weight.Nonetheless,the percent removal of Cr(Ⅲ/Ⅵ) peaked with a chitosan molecular weight of 200 kDa,followed by a dramatic decrease with an increasing chitosan molecular weight.Generally,chitosan had different removal effects on four out of five tested metal ions,and the percent removal of Cd(Ⅱ),Pb(Ⅱ),Cr(Ⅲ/Ⅵ) and Ni(Ⅱ) was approximately 55%,45%,50%,and 16%,respectively.In a word,chitosan used in cigarette filter can remove toxic heavy metal ions in the mainstream smoke,improve cigarette safety,and reduce the harm to smokers.

  15. Solution NMR refinement of a metal ion bound protein using metal ion inclusive restrained molecular dynamics methods

    Energy Technology Data Exchange (ETDEWEB)

    Chakravorty, Dhruva K.; Wang Bing [University of Florida, Department of Chemistry and the Quantum Theory Project (United States); Lee, Chul Won [Chonnam National University, Department of Chemistry (Korea, Republic of); Guerra, Alfredo J.; Giedroc, David P., E-mail: giedroc@indiana.edu [Indiana University, Department of Chemistry (United States); Merz, Kenneth M., E-mail: kmerz1@gmail.com [University of Florida, Department of Chemistry and the Quantum Theory Project (United States)

    2013-06-15

    Correctly calculating the structure of metal coordination sites in a protein during the process of nuclear magnetic resonance (NMR) structure determination and refinement continues to be a challenging task. In this study, we present an accurate and convenient means by which to include metal ions in the NMR structure determination process using molecular dynamics (MD) simulations constrained by NMR-derived data to obtain a realistic and physically viable description of the metal binding site(s). This method provides the framework to accurately portray the metal ions and its binding residues in a pseudo-bond or dummy-cation like approach, and is validated by quantum mechanical/molecular mechanical (QM/MM) MD calculations constrained by NMR-derived data. To illustrate this approach, we refine the zinc coordination complex structure of the zinc sensing transcriptional repressor protein Staphylococcus aureus CzrA, generating over 130 ns of MD and QM/MM MD NMR-data compliant sampling. In addition to refining the first coordination shell structure of the Zn(II) ion, this protocol benefits from being performed in a periodically replicated solvation environment including long-range electrostatics. We determine that unrestrained (not based on NMR data) MD simulations correlated to the NMR data in a time-averaged ensemble. The accurate solution structure ensemble of the metal-bound protein accurately describes the role of conformational sampling in allosteric regulation of DNA binding by zinc and serves to validate our previous unrestrained MD simulations of CzrA. This methodology has potentially broad applicability in the structure determination of metal ion bound proteins, protein folding and metal template protein-design studies.

  16. Metal ion levels and lymphocyte counts

    DEFF Research Database (Denmark)

    Penny, Jeannette Ø; Varmarken, Jens-Erik; Ovesen, Ole

    2013-01-01

    . RESULTS: The T-lymphocyte counts for both implant types declined over the 2-year period. This decline was statistically significant for CD3(+)CD8(+) in the THA group, with a regression coefficient of -0.04 × 10(9)cells/year (95% CI: -0.08 to -0.01). Regression analysis indicated a depressive effect...... of cobalt ions in particular on T-cells with 2-year whole-blood cobalt regression coefficients for CD3+ of -0.10 (95% CI: -0.16 to -0.04) × 10(9) cells/parts per billion (ppb), for CD3+CD4+ of -0.06 (-0.09 to -0.03) × 10(9) cells/ppb, and for CD3(+)CD8(+) of -0.02 (-0.03 to -0.00) × 10(9) cells/ppb...

  17. Luminescence of vanadium and rare earth ions in alkaline earth sulfates

    NARCIS (Netherlands)

    Blasse, G.; Pietersen, H.G.

    2006-01-01

    The luminescence of samples MeSO4---V, RE (Me = Mg, Ca, Ba) depends strongly on the nature of the Me ions. The amount of association of the V5+ and RE3+ ions can be estimated from the measured quantum efficiencies

  18. Dipole moments of ligands and Stark splitting of rare earth ion levels

    CERN Document Server

    Chumachkova, M M

    2001-01-01

    A model for description the polarization and relaxation of ions-ligands at impurity defects in crystals is proposed and tested. The approach is based on introduction of effective electrical dipole moments, taken into consideration as fundamental parameters of crystals and determined from experimental data on the energy structure of impurity ions. Calculations show that the rare-earth ion energy structure essentially depends on the value of effective electric dipole moments of surrounding matrix ions. Parameters of the theory are found. The calculation results coincide with experimental data available. Possibilities of the approach proposed in investigating crystals containing impurities (dielectrics and semiconductors) are discussed

  19. Kinetic study of heavy metal ions removal by ion exchange in batch conical air spouted bed

    Directory of Open Access Journals (Sweden)

    T.M. Zewail

    2015-03-01

    Full Text Available Spouted bed contactor is a hybrid of fixed and fluidized bed contactors, which retains the advantages of each with good hydrodynamic conditions. The aim of the present study is to investigate the performance of a batch conical air spouted vessel for heavy metal removal by strong cation exchange resins (AMBERJET 1200 Na. The effect of various parameters such as type of heavy metal ions (Ni+2 and Pb+2, contact time, superficial air velocity and initial heavy metal ion concentration on % heavy metal ion removal has been investigated. It has been found that under optimum conditions 98% and 99% removal of Ni+2 and Pb+2 were achieved respectively. Several kinetic models were used to test the experimental data and to examine the controlling mechanism of the sorption process. The present results of Ni+2 and Pb+2 well fit pseudo second order kinetic model with a high correlation coefficient. Both film diffusion and intra-particle diffusion contribute to the ion exchange process. The present study revealed that spouted bed vessel may provide an effective alternative for conducting ion exchange reactions.

  20. Ion conducting polymers and polymer blends for alkali metal ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    DeSimone, Joseph M.; Pandya, Ashish; Wong, Dominica; Vitale, Alessandra

    2017-08-29

    Electrolyte compositions for batteries such as lithium ion and lithium air batteries are described. In some embodiments the compositions are liquid compositions comprising (a) a homogeneous solvent system, said solvent system comprising a perfluropolyether (PFPE) and polyethylene oxide (PEO); and (b) an alkali metal salt dissolved in said solvent system. In other embodiments the compositions are solid electrolyte compositions comprising: (a) a solid polymer, said polymer comprising a crosslinked product of a crosslinkable perfluropolyether (PFPE) and a crosslinkable polyethylene oxide (PEO); and (b) an alkali metal ion salt dissolved in said polymer. Batteries containing such compositions as electrolytes are also described.

  1. Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent.

    Science.gov (United States)

    Jo, Se-Hee; Park, Chanhun; Yi, Sung Chul; Kim, Dukjoon; Mun, Sungyong

    2011-08-19

    A three-zone carousel process, in which Cu(II)-imprinted polymer (Cu-MIP) and a buffer solution were employed as adsorbent and eluent respectively, has been developed previously for continuous separation of Cu²⁺ (product) from Mn²⁺ and Co²⁺ (impurities). Although this process was reported to be successful in the aforementioned separation task, the way of using a buffer solution as eluent made it inevitable that the product stream included the buffer-related metal ions (i.e., the constituent metal ions of the buffer solution) as well as copper ions. For a more perfect recovery of copper ions, it would be necessary to improve the previous carousel process such that it can remove the buffer-related metal ions from copper ions while maintaining the previous function of separating copper ions from the other 2 impure heavy-metal ions. This improvement was made in this study by proposing a four-zone carousel process based on the following strategy: (1) the addition of one more zone for performing the two-step re-equilibration tasks and (2) the use of water as the eluent of the washing step in the separation zone. The operating conditions of such a proposed process were determined on the basis of the data from a series of single-column experiments. Under the determined operating conditions, 3 runs of carousel experiments were carried out. The results of these experiments revealed that the feed-loading time was a key parameter affecting the performance of the proposed process. Consequently, the continuous separation of copper ions from both the impure heavy-metal ions and the buffer-related metal ions could be achieved with a purity of 91.9% and a yield of 92.8% by using the proposed carousel process based on a properly chosen feed-loading time.

  2. Process optimization and kinetics for leaching of rare earth metals from the spent Ni-metal hydride batteries.

    Science.gov (United States)

    Meshram, Pratima; Pandey, B D; Mankhand, T R

    2016-05-01

    Nickel-metal hydride batteries (Ni-MH) contain not only the base metals, but valuable rare earth metals (REMs) viz. La, Sm, Nd, Pr and Ce as well. In view of the importance of resource recycling and assured supply of the contained metals in such wastes, the present study has focussed on the leaching of the rare earth metals from the spent Ni-MH batteries. The conditions for the leaching of REMs from the spent batteries were optimized as: 2M H2SO4, 348K temperature and 120min of time at a pulp density (PD) of 100g/L. Under this condition, the leaching of 98.1% Nd, 98.4% Sm, 95.5% Pr and 89.4% Ce was achieved. Besides the rare earth metals, more than 90% of base metals (Ni, Co, Mn and Zn) were also leached out in this condition. Kinetic data for the dissolution of all the rare earth metals showed the best fit to the chemical control shrinking core model. The leaching of metals followed the mechanism involving the chemical reaction proceeding on the surface of particles by the lixiviant, which was corroborated by the XRD phase analysis and SEM-EDS studies. The activation energy of 7.6, 6.3, 11.3 and 13.5kJ/mol was acquired for the leaching of neodymium, samarium, praseodymium and cerium, respectively in the temperature range 305-348K. From the leach liquor, the mixed rare earth metals were precipitated at pH∼1.8 and the precipitated REMs was analyzed by XRD and SEM studies to determine the phases and the morphological features.

  3. Liquid metal alloy ion sources—An alternative for focussed ion beam technology

    Science.gov (United States)

    Bischoff, Lothar; Mazarov, Paul; Bruchhaus, Lars; Gierak, Jacques

    2016-06-01

    Today, Focused Ion Beam (FIB) processing is nearly exclusively based on gallium Liquid Metal Ion Sources (LMIS). But, many applications in the μm- or nm range could benefit from ion species other than gallium: local ion implantation, ion beam mixing, ion beam synthesis, or Focused Ion Beam Lithography (IBL). Therefore, Liquid Metal Alloy Ion Sources (LMAIS) represent a promising alternative to expand the remarkable application fields for FIB. Especially, the IBL process shows potential advantages over, e.g., electron beam or other lithography techniques: direct, resistless, and three-dimensional patterning, enabling a simultaneous in-situ process control by cross-sectioning and inspection. Taking additionally into account that the used ion species influences significantly the physical and chemical nature of the resulting nanostructures—in particular, the electrical, optical, magnetic, and mechanic properties leading to a large potential application area which can be tuned by choosing a well suited LMAIS. Nearly half of the elements of the periodic table are recently available in the FIB technology as a result of continuous research in this area during the last forty years. Key features of a LMAIS are long life-time, high brightness, and stable ion current. Recent developments could make these sources feasible for nano patterning issues as an alternative technology more in research than in industry. The authors will review existing LMAIS, LMIS other than Ga, and binary and ternary alloys. These physical properties as well as the fabrication technology and prospective domains for modern FIB applications will similarly be reviewed. Other emerging ion sources will be also presented and their performances discussed.

  4. New Ion-Nucleation Mechanism Relevant for the Earth's Atmosphere

    DEFF Research Database (Denmark)

    Marsh, N.D.; Svensmark, Henrik; Pedersen, Jens Olaf Pepke

    stages of particle coagulation and condensation have been performed and compared with the experimental results. The simulations indicate that a stable distribution of sub 3nm particles exists that cannot be detected using standard techniques for measuring atmospheric aerosol, and that the nucleation rate......Experimental studies of ultra-fine aerosol nucleation in clean atmospheric air, containing trace amounts of ozone, sulphur dioxide, and water vapour suggest that the production rate of critical clusters is sensitive to ionisation. To assess this sensitivity numerical simulations of the initial...... particles with the potential to influence the transparency of Earth's atmosphere. This is consistent with a number of recent studies indicating that variations in the density of cosmic rays arriving at Earth have affected climate over a wide range of time scales....

  5. Ion beam mixing isotopic metal bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Fell, C.J. [Newcastle Univ., NSW (Australia). Dept. of Physics; Kenny, M.J. [CSIRO, Lindfield, NSW (Australia). Div. of Applied Physics

    1993-12-31

    In order to obtain an insight into the mechanisms of ion-solid interactions, bilayer targets can be prepared from two different isotopes. A mixing study SIMS is to be carried out using specially grown monocrystalline bilayers of {sup 58}Ni / {sup 60}Ni. An important aspect of the work is the preparation of high quality single-crystal thin films. The Ni layers will be grown on the (110) surface of pure Ni and verified for crystallinity using Reflection High-Energy Electron Diffraction and Rutherford Backscattering channelling analysis. The Pd bilayers will be grown on a Pd (100) surface. RHEED will be used to confirm the two-dimensional crystallinity of the surface before and after deposition of each layer, and channelling used to confirm bulk film crystallinity. Single crystal substrates are currently being prepared. Analysis of the Ni (110) surface using RHEED at 9 kV shows a streak spacing which corresponds to a lattice spacing of 2.47 {+-} 0.09 Angstroms. 9 refs., 1 fig.

  6. Quantum CPF gates between rare earth ions through measurement

    Science.gov (United States)

    Xiao, Yun-Feng; Han, Zheng-Fu; Yang, Yong; Guo, Guang-Can

    2004-09-01

    We propose a method to realize quantum controlled phase flip (CPF) through interaction between a single-photon pulse and two microsphere cavities with a single three-level ion respectively and final photonic measurement. Our CPF gates are scalable with extremely high fidelity and low error rate, and are more applicable based on current laboratory cavity-QED technology.

  7. Quantum CPF gates between rare earth ions through measurement

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Yunfeng [Key Laboratory of Quantum Information, University of Science and Technology of China (CAS), Hefei 230026 (China)]. E-mail: yfxiao@mail.ustc.edu.cn; Han Zhengfu [Key Laboratory of Quantum Information, University of Science and Technology of China (CAS), Hefei 230026 (China)]. E-mail: zfhan@ustc.edu.cn; Yang Yong [Key Laboratory of Quantum Information, University of Science and Technology of China (CAS), Hefei 230026 (China); Guo Guangcan [Key Laboratory of Quantum Information, University of Science and Technology of China (CAS), Hefei 230026 (China)]. E-mail: gcguo@ustc.edu.cn

    2004-09-20

    We propose a method to realize quantum controlled phase flip (CPF) through interaction between a single-photon pulse and two microsphere cavities with a single three-level ion respectively and final photonic measurement. Our CPF gates are scalable with extremely high fidelity and low error rate, and are more applicable based on current laboratory cavity-QED technology.

  8. A study of the structural properties of GaN implanted by various rare-earth ions

    Science.gov (United States)

    Mackova, A.; Malinský, P.; Sofer, Z.; Šimek, P.; Sedmidubský, D.; Mikulics, M.; Wilhelm, R. A.

    2013-07-01

    GaN layers with crystallographic orientation, grown by low-pressure metal-organic vapour-phase epitaxy (MOVPE) on c-plane sapphire substrates, were implanted with 200 and 400 keV Sm+, Tm+, Eu+, Tb+ and Ho+ ions at fluencies of 1 × 1015-1 × 1016 cm-2. The composition of the ion-implanted layers and concentration profiles of the implanted atoms were studied by Rutherford Back-Scattering spectrometry (RBS). The profiles were compared to SRIM 2008 simulations. The structural properties of the ion-implanted layers were characterised by RBS-channelling and Raman spectroscopy. Changes in the surface morphology caused by the ion implantation were examined by Atomic Force Microscopy (AFM). A structural analysis showed a high disorder of the atoms close to the amorphised structure at the surface layer above an implantation fluence of 5 × 1015 cm-2 while lower disorder density was observed in the bulk according to the projected range of 400 keV ions. The post-implantation annealing induced significant changes only in the Sm and Eu depth profiles; a diffusion of rare-earths implanted at a fluence of 5 × 1015 cm-2 to the surface was observed. The annealing caused the reconstruction of the surface layer accompanied by surface-roughness enhancement.

  9. Optical studies of ion-beam synthesized metal alloy nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Magudapathy, P., E-mail: pmp@igcar.gov.in; Srivatsava, S. K.; Gangopadhyay, P.; Amirthapandian, S.; Sairam, T. N.; Panigrahi, B. K. [Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam – 603 102 India (India)

    2015-06-24

    Au{sub x}Ag{sub 1-x} alloy nanoparticles with tunable surface plasmon resonance (SPR) have been synthesized on a silica glass substrate. A small Au foil on an Ag foil is irradiated as target substrates such that ion beam falls on both Ag foil and Au foils. Silica slides are kept at an angle ∼45° with respect to the metallic foils. While irradiating the metallic foils with 100 keV Ar{sup +} ions, sputtered Au and Ag atoms get deposited on the silica-glass. In this configuration the foils have been irradiated by Ar{sup +} ions to various fluences at room temperature and the sputtered species are collected on silica slides. Formation of Au{sub x}Ag{sub 1-x} nanoparticles has been confirmed from the optical absorption measurements. With respect to the exposure area of Au and Ag foils to the ion beam, the SPR peak position varies from 450 to 500 nm. Green photoluminescence has been observed from these alloy metal nanoparticles.

  10. Peptide immobilisation on porous silicon surface for metal ions detection.

    Science.gov (United States)

    Sam, Sabrina S; Chazalviel, Jean-Noël Jn; Gouget-Laemmel, Anne Chantal Ac; Ozanam, François F; Etcheberry, Arnaud A; Gabouze, Nour-Eddine N

    2011-01-01

    In this work, a Glycyl-Histidyl-Glycyl-Histidine (GlyHisGlyHis) peptide is covalently anchored to the porous silicon PSi surface using a multi-step reaction scheme compatible with the mild conditions required for preserving the probe activity. In a first step, alkene precursors are grafted onto the hydrogenated PSi surface using the hydrosilylation route, allowing for the formation of a carboxyl-terminated monolayer which is activated by reaction with N-hydroxysuccinimide in the presence of a peptide-coupling carbodiimide N-ethyl-N'-(3-dimethylaminopropyl)-carbodiimide and subsequently reacted with the amino linker of the peptide to form a covalent amide bond. Infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy are used to investigate the different steps of functionalization.The property of peptides to form stable complexes with metal ions is exploited to achieve metal-ion recognition by the peptide-modified PSi-based biosensor. An electrochemical study of the GlyHisGlyHis-modified PSi electrode is achieved in the presence of copper ions. The recorded cyclic voltammograms show a quasi-irreversible process corresponding to the Cu(II)/Cu(I) couple. The kinetic factors (the heterogeneous rate constant and the transfer coefficient) and the stability constant of the complex formed on the porous silicon surface are determined. These results demonstrate the potential role of peptides grafted on porous silicon in developing strategies for simple and fast detection of metal ions in solution.

  11. Peptide immobilisation on porous silicon surface for metal ions detection

    Directory of Open Access Journals (Sweden)

    Chazalviel Jean-Noël

    2011-01-01

    Full Text Available Abstract In this work, a Glycyl-Histidyl-Glycyl-Histidine (GlyHisGlyHis peptide is covalently anchored to the porous silicon PSi surface using a multi-step reaction scheme compatible with the mild conditions required for preserving the probe activity. In a first step, alkene precursors are grafted onto the hydrogenated PSi surface using the hydrosilylation route, allowing for the formation of a carboxyl-terminated monolayer which is activated by reaction with N-hydroxysuccinimide in the presence of a peptide-coupling carbodiimide N-ethyl-N'-(3-dimethylaminopropyl-carbodiimide and subsequently reacted with the amino linker of the peptide to form a covalent amide bond. Infrared spectroscopy (FT-IR and X-ray photoelectron spectroscopy are used to investigate the different steps of functionalization. The property of peptides to form stable complexes with metal ions is exploited to achieve metal-ion recognition by the peptide-modified PSi-based biosensor. An electrochemical study of the GlyHisGlyHis-modified PSi electrode is achieved in the presence of copper ions. The recorded cyclic voltammograms show a quasi-irreversible process corresponding to the Cu(II/Cu(I couple. The kinetic factors (the heterogeneous rate constant and the transfer coefficient and the stability constant of the complex formed on the porous silicon surface are determined. These results demonstrate the potential role of peptides grafted on porous silicon in developing strategies for simple and fast detection of metal ions in solution.

  12. Peptide immobilisation on porous silicon surface for metal ions detection

    Science.gov (United States)

    Sam, Sabrina S.; Chazalviel, Jean-Noël Jn; Gouget-Laemmel, Anne Chantal Ac; Ozanam, François F.; Etcheberry, Arnaud A.; Gabouze, Nour-Eddine N.

    2011-06-01

    In this work, a Glycyl-Histidyl-Glycyl-Histidine (GlyHisGlyHis) peptide is covalently anchored to the porous silicon PSi surface using a multi-step reaction scheme compatible with the mild conditions required for preserving the probe activity. In a first step, alkene precursors are grafted onto the hydrogenated PSi surface using the hydrosilylation route, allowing for the formation of a carboxyl-terminated monolayer which is activated by reaction with N-hydroxysuccinimide in the presence of a peptide-coupling carbodiimide N-ethyl- N'-(3-dimethylaminopropyl)-carbodiimide and subsequently reacted with the amino linker of the peptide to form a covalent amide bond. Infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy are used to investigate the different steps of functionalization. The property of peptides to form stable complexes with metal ions is exploited to achieve metal-ion recognition by the peptide-modified PSi-based biosensor. An electrochemical study of the GlyHisGlyHis-modified PSi electrode is achieved in the presence of copper ions. The recorded cyclic voltammograms show a quasi-irreversible process corresponding to the Cu(II)/Cu(I) couple. The kinetic factors (the heterogeneous rate constant and the transfer coefficient) and the stability constant of the complex formed on the porous silicon surface are determined. These results demonstrate the potential role of peptides grafted on porous silicon in developing strategies for simple and fast detection of metal ions in solution.

  13. Photo-Catalyzed Rare Earth Materials with Ability to Translate Free Radicals into Negative Ions

    Institute of Scientific and Technical Information of China (English)

    Jin Zongzhe; Zhang Zhili; Wei Gang; Huang Lirong

    2005-01-01

    Materials with function of producing negative ions effection,containing valency-variable rare earth elements and semiconductor oxide,were fabricated.Free radicals produced by the materials were tested.The result shows that the materials can produce quite a few free radicals as·O-2 no matter whether they are under illumination of ultraviolet radiation or under visible light radiation,or under no light radiation, demonstrating semiconductor oxide can be catalysed under the visible light radiation.At the same time the result shows there is direct relation between the number of free radicals and of the negative ion produced by the materials,which meant that during photo-catalyzed and redox process of valency-variable rare earth elements free radicals translate into negative ions. A circular model is presented involving circulating change of valency-variable rare earth elements and water and oxygen absorbed on the surface of materials under the condition of photocatalysis.

  14. [Applications of metal ions and their complexes in medicine I].

    Science.gov (United States)

    Nagy, László; Csintalan, Gabriella; Kálmán, Eszter; Sipos, Pál; Szvetnik, Attila

    2003-01-01

    The "inorganic medical chemistry" is a rapidly developing field with enormous potential for applications, which offers new possibilities to the pharmaceutical industry. For example, the titanocene dichloride is already in clinical use, and antimetastatic activity of a range of Ru(III) complexes is also well established. There are ways to minimize the toxicity of Gd(III) complexes and therefore they can be safely injected as MRI contrast agents. The so called "ligand design" allows paramagnetic ions to be targeted to specific organs. Such designed ligands also enable the targeting of radiodiagnostic (99mTc) and radiotherapeutic (186Re) isotopes. There is a significant progress in understanding the coordination chemistry and biochemistry of metal ion(s) containing complexes such as Au antiarthritic and Bi antiulcer drugs. Further, currently developing areas include Mn (SOD mimics), V (insulin mimics), Ru (NO scavengers), Ln-based photosensitizers, metal-targeted organic agents and the Fe overload. The expanding knowledge of the role of metals in biochemistry is expected to provide scope for the design of new drugs in many other areas too, for example neuropharmaceutical and antiaffective agents. Progress in coordination chemistry is strongly dependent on understanding not only the thermodynamics of reactions, but also the kinetics of metal complexes under biologically relevant conditions.

  15. Polymer Catalysts Imprinted with Metal Ions as Biomimics of Metalloenzymes

    Directory of Open Access Journals (Sweden)

    Joanna Czulak

    2013-01-01

    Full Text Available This work presents the preparation and properties of molecularly imprinted polymers (MIPs with catalytic centers that mimic the active sites of metalloenzymes. The MIP synthesis was based on suspension polymerization of functional monomers (4-vinylpyridine and acrylonitrile with trimethylolpropane trimethacrylate as a crosslinker in the presence of transition metal ions and 4-methoxybenzyl alcohol as a template. Four metal ions have been chosen for imprinting from among the microelements that are the most essential in the native enzymes: Cu2+, Co2+, Mn2+, and Zn2+. To prepare catalysts, the required loading of metal ions was obtained during sorption process. The catalysts imprinted with Cu2+, Co2+, and Zn2+ were successfully used for hydroquinone oxidation in the presence of hydrogen peroxide. The Mn2+-imprinted catalyst showed no activity due to the insufficient metal loading. Cu2+ MIP showed the highest efficiency. In case of Cu- and Co-MIP catalysts, their activity was additionally increased by the use of surface imprinting technique.

  16. New Catalytic DNA Biosensors for Radionuclides and Metal ion

    Energy Technology Data Exchange (ETDEWEB)

    Yi Lu

    2008-03-01

    We aim to develop new DNA biosensors for simultaneous detection and quantification of bioavailable radionuclides, such as uranium, technetium, and plutonium, and metal contaminants, such as lead, chromium, and mercury. The sensors will be highly sensitive and selective. They will be applied to on-site, real-time assessment of concentration, speciation, and stability of the individual contaminants before and during bioremediation, and for long-term monitoring of DOE contaminated sites. To achieve this goal, we have employed a combinatorial method called “in vitro selection” to search from a large DNA library (~ 1015 different molecules) for catalytic DNA molecules that are highly specific for radionuclides or other metal ions through intricate 3-dimensional interactions as in metalloproteins. Comprehensive biochemical and biophysical studies have been performed on the selected DNA molecules. The findings from these studies have helped to elucidate fundamental principles for designing effective sensors for radionuclides and metal ions. Based on the study, the DNA have been converted to fluorescent or colorimetric sensors by attaching to it fluorescent donor/acceptor pairs or gold nanoparticles, with 11 part-per-trillion detection limit (for uranium) and over million fold selectivity (over other radionuclides and metal ions tested). Practical application of the biosensors for samples from the Environmental Remediation Sciences Program (ERSP) Field Research Center (FRC) at Oak Ridge has also been demonstrated.

  17. Low energy ion beam assisted growth of metal multilayers

    Science.gov (United States)

    Quan, Junjie

    Vapor deposited metal multilayers have attracted a great deal of interest in recent years because they offer extraordinary strength, hardness, heat resistance, and unexpected new properties like high reflectivity and spin-dependent conductivity. The giant magnetoresistance effects discovered in Fe/Cr artificial superstructures in 1988 stimulated a large number of studies on the electronic transport properties of spintronic materials because of their important applications in highly sensitive magnetic sensors, nonvolatile random access memories, and the data storage industry in general. Magnetic multilayers allow exploitation of unique micromagnetic, magnetooptic, and magnetoelectronic phenomena that cannot be realized using conventional materials. For example, if ferromagnetic layers (such as CoFe) with a thicknesses of 5-7 nm are separated by a non-magnetic spacer (such as Cu or AlOx) of an appropriate thickness (1-3 nm), they can exhibit large changes in their electrical resistance when a magnetic field is applied. These changes are caused mainly by spin-dependent conduction electron scattering at magnetic multilayer interfaces. Many experimental and theoretical works have sought to promote a basic understanding of the effect of atomic structure in thin film multilayers upon spin dependent transport. It has been found that interfacial imperfections, such as interfacial roughness and interlayer mixing, dramatically reduce the properties exploited for spintronic applications. A combination of computer modeling and experiments has been used to discover more effective ways to control the interfacial structures of metal multilayers. Earlier atomic simulations had indicated that it is very important to control adatom energy during deposition in order to improve interface properties. Based on these ideas, this dissertation has investigated the effects of low energy ion assistance during metal multilayer deposition. Using molecular dynamics modeling, the effects of ion

  18. Production yield of rare-earth ions implanted into an optical crystal

    Energy Technology Data Exchange (ETDEWEB)

    Kornher, Thomas, E-mail: t.kornher@physik.uni-stuttgart.de; Xia, Kangwei; Kolesov, Roman; Reuter, Rolf; Villa, Bruno; Wrachtrup, Jörg [3. Physikalisches Institut, Universität Stuttgart, 70569 Stuttgart (Germany); Kukharchyk, Nadezhda; Wieck, Andreas D. [Angewandte Festkörperphysik, Ruhr-Universität Bochum, 44780 Bochum (Germany); Siyushev, Petr [Universität Ulm, Institut für Quantenoptik, 89081 Ulm (Germany); Stöhr, Rainer [3. Physikalisches Institut, Universität Stuttgart, 70569 Stuttgart (Germany); Institute for Quantum Computing, University of Waterloo, Waterloo, Ontario N2L 3G1 (Canada); Schreck, Matthias [Experimentalphysik IV, Universität Augsburg, 86159 Augsburg (Germany); Becker, Hans-Werner [RUBION, Ruhr-Universität Bochum, 44780 Bochum (Germany)

    2016-02-01

    Rare-earth (RE) ions doped into desired locations of optical crystals might enable a range of novel integrated photonic devices for quantum applications. With this aim, we have investigated the production yield of cerium and praseodymium by means of ion implantation. As a measure, the collected fluorescence intensity from both implanted samples and single centers was used. With a tailored annealing procedure for cerium, a yield up to 53% was estimated. Praseodymium yield amounts up to 91%. Such high implantation yield indicates a feasibility of creation of nanopatterned rare-earth doping and suggests strong potential of RE species for on-chip photonic devices.

  19. A novel dithiourea and its response to metal ions

    Institute of Scientific and Technical Information of China (English)

    Lu Yuan; Hong Zhong; Li Oing Li; Jing Jing Xiao

    2012-01-01

    The synthesis,characterization,and its response to metal ions of a novel thiourea N,N'-diethoxycarbonyl-N'',N'''-(1,2-ethylidene) dithiourea was reported.The results show that this dithiourea with new structure can react with Cu2+ and Ni2+ separately,and has a best selectivity to Fe3+ ions.Bench-scale flotation tests were also carried out,verifying it has higher copper flotation recovery and better selectivity to sulfide ores containing Cu compared with universal collectors.

  20. Peripheral collisions of highly charged ions with metal clusters

    Institute of Scientific and Technical Information of China (English)

    Zhang Cheng-Jun; Hu Bi-Tao; Luo Xian-Wen

    2012-01-01

    Within the framework of the dynamical classical over-barrier model,the soft collisions between slow highly charged ions(SHCIs)Ar17+ and the large copper clusters under large impact parameters have been studied in this paper.We present the dominant mechanism of the electron transfer between SHCls and a large metal cluster by computational simulation.The evolution of the occupation of projectile ions,KLχ satellite lines,X-ray yields,Auger electron spectrum and scattering angles are provided.

  1. Removal of Heavy Metal Ions From Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    maziar noei

    2014-12-01

    Full Text Available The removal of Zn(II, V(II,  by  silica aerogel has been found to be concentration, , contact time, adsorbent dose and temperature dependent. ion exchange are the major removal mechanisms involved. The adsorption isotherm studies clearly indicated that the adsorptive behaviour of metal ions on silica aerogel  was satisfied. The applicability of the Lagergren kinetic model has also been investigated. Thermodynamic constant (Kad , standard free energy ( ∆G0 ,enthalpy (∆H0 and entropy (∆S0 were calculated for predicting the nature of adsorption

  2. Statistical evaluation of biogeochemical variables affecting spatiotemporal distributions of multiple free metal ion concentrationsin an urban estuary

    Science.gov (United States)

    Free metal ion concentrations have been recognized as a better indicator of metal bioavailability in aquatic environments than total dissolved metal concentrations. However, our understanding of the determinants of free ion concentrations, especially in a metal mixture, is limite...

  3. MRI probes for sensing biologically relevant metal ions.

    Science.gov (United States)

    Bonnet, Célia S; Tóth, Eva

    2010-03-01

    Given the important role of metal ions in fundamental biological processes, the visualization of their concentration in living animals by repeatable, noninvasive imaging techniques, such as MRI, would be highly desirable. A large number of metal-responsive MRI contrast agents, the majority based on Gd(3+) complexes, have been reported in recent years. The contrast-enhancing properties (relaxivity) of a Gd(3+) complex can be most conveniently modulated by interaction with the sensed metal cation via changes in the number of water molecules bound directly to Gd(3+) or changes in the size of the complex, which represent the two major strategies to develop metal sensitive MRI probes. Here, we survey paramagnetic lanthanide complexes involving Gd(3+) agents and paramagnetic chemical exchange saturation transfer probes designed to detect the most important endogenous metal ions: calcium, zinc, iron and copper. Future work will likely focus on extending applications of these agents to living animals, as well as on exploring new ways of creating molecular MRI probes in order to meet requirements such as higher specificity or lower detection limits.

  4. Metal ion toxins and brain aquaporin-4 expression: an overview

    Directory of Open Access Journals (Sweden)

    Adriana eXimenes-Da-Silva

    2016-06-01

    Full Text Available Metal ions such as iron, zinc, and manganese are essential to metabolic functions, protein synthesis, neurotransmission, and antioxidant neuroprotective mechanisms. Conversely, non-essential metals such as mercury and lead are sources of human intoxication due to occupational activities or environmental contamination. Essential or non-essential metal accumulation in the central nervous system (CNS results in changes in blood-brain barrier (BBB permeability, as well as triggering microglia activation and astrocyte reactivity and changing water transport through the cells, which could result in brain swelling. Aquaporin-4 is the main water channel in the CNS, is expressed in astrocyte foot processes in brain capillaries and along the circumventricular epithelium in the ventricles, and has important physiological functions in maintaining brain osmotic homeostasis and supporting brain excitability through regulation of the extracellular space. Some evidence has pointed to a role of AQP4 during metal intoxication in the brain, where it may act in a dual form as a neuroprotector or a mediator of the development of oxidative stress in neurons and astrocytes, resulting in brain swelling and neuronal damage. This mini-review presents the way some metal ions affect changes in AQP4 expression in the CNS and discuss the ways in which water transport in brain cells can be involved in brain damage.

  5. The Corrosion Protection of Metals by Ion Vapor Deposited Aluminum

    Science.gov (United States)

    Danford, M. D.

    1993-01-01

    A study of the corrosion protection of substrate metals by ion vapor deposited aluminum (IVD Al) coats has been carried out. Corrosion protection by both anodized and unanodized IVD Al coats has been investigated. Base metals included in the study were 2219-T87 Al, 7075-T6 Al, Titanium-6 Al-4 Vanadium (Ti-6Al-4V), 4130 steel, D6AC steel, and 4340 steel. Results reveal that the anodized IVD Al coats provide excellent corrosion protection, but good protection is also achieved by IVD Al coats that have not been anodized.

  6. Activation Function of Chloroperoxidase in the Presence of Metal Ions at Elevated Temperature from 25 to 55℃

    Institute of Scientific and Technical Information of China (English)

    GAO, Qiang; JIANG, Yucheng; GAO, Xiaoqin; HU, Mancheng; LI, Shuni; ZHAI, Quanguo

    2009-01-01

    The investigation and comparison of chlorination activity of chloroperoxidase (CPO) from Caldariomyces fumago in metal ion solutions to those in pure buffer indicated that CPO could be effectively activated by some al- kaline-earth metals and transition metals. The obtained maximum relative activity of CPO was 1.33 time at 75 Co2+ at 25 ℃. Moreover, the CPO stability against temperature was improved in the presence of the above metal ions. At 55℃, CPO could retain only about 40% of activity whereas 75% and 81% of activity were maintained in Mg2+ and Ca2+ media, respectively. It was suggested that the metal ions bind to the acid-base catalytic groups Glu183, His105 and Asp106 around the active site of CPO, and activate CPO by both an enrichment of substrate concentration and the conformational change of CPO, which are favorable to the substrate access. The analysis of kinetic parameters indicated that the activation was mainly due to an increase in kcat values. The affinity and speci- ficity of CPO to substrates were also improved in these metal ion media. The results in this work are promising in view of industrial applications of this versatile biological catalyst.

  7. Coordination kinetics of different metal ions with the amidoximated polyacrylonitrile nanofibrous membranes and catalytic behaviors of their complexes

    Energy Technology Data Exchange (ETDEWEB)

    Li, Fu; Dong, Yong Chun; Kang, Wei Min; Cheng, Bowen; Qu, Xiang; Cui, Guixin [School of Textiles, Tianjin Polytechnic University, Tianjin (China)

    2016-12-15

    Two transition metal ions (Fe{sup 3+} and Cu{sup 2+}) and a rare earth metal ion (Ce{sup 3+}) were selected to coordinate with amidoximated polyacrylonitrile (PAN) nanofibrous membrane for preparing three metal modified PAN nanofibrous membrane complexes (M-AO-n-PANs, M = Fe, Cu, or Ce) as the heterogeneous Fenton catalysts for the dye degradation in water under visible irradiation. The coordination kinetics of three metal ions with modified PAN nanofibrous membranes was studied and the catalytic properties of the resulting complexes were also compared. The results indicated that increasing metal ion concentrations in solution or higher coordination temperature led to a significant increase in metal content, particularly in Fe and Cu contents of the complexes. Their coordination process could be described using Langmuir isotherm and pseudo-second-order kinetic equations. Moreover, Fe-AO-n-PAN had the best photocatalytic efficiency for the dye degradation in acidic medium, but a lower photocatalytic activity than Cu-AO-n-PAN in alkali medium.

  8. Selective retention of basic compounds by metal aquo-ion affinity chromatography.

    Science.gov (United States)

    Asakawa, Yoshiki; Yamamoto, Eiichi; Asakawa, Naoki

    2014-10-01

    A novel metal aquo-ion affinity chromatography has been developed for the analysis of basic compounds using heat-treated silica gel containing hydrated metal cations (metal aquo-ions) as the packing material. The packing materials of the metal aquo-ion affinity chromatography were prepared by the immobilization of a single metal component such as Fe(III), Al(III), Ag(I), and Ni(II) on silica gel followed by extensive heat treatment. The immobilized metals form aquo-ions to present cation-exchange ability for basic analytes and the cation-exchange ability for basic analytes depends on pKa of the immobilized metal species. In the present study, to evaluate the retention characteristics of metal aquo-ion affinity chromatography, the on-line solid-phase extraction of drugs was investigated. Obtained data clearly evidence the selective retention capability of metal aquo-ion affinity chromatography for basic analytes with sufficient capacity.

  9. Speciation of heavy metal ions as influenced by interactions with montmorillonite, Al hydroxide polymers and citrate.

    NARCIS (Netherlands)

    Janssen, R.P.T.

    1995-01-01

    Clay minerals, metal-hydroxides and organic matter can bind metal ions; moreover they also interact with each other. These mutual interactions influence the metal binding to a significant extent. In this study, the speciation of the heavy metal ions Zn and Ph was investigated in model systems consis

  10. On the origins of energetic ions in the Earth's dayside magnetosheath

    Energy Technology Data Exchange (ETDEWEB)

    Fuselier, S.A.; Klumpar, D.M.; Shelley, E.G. (Lockheed Palo Alto Research Lab., CA (USA))

    1991-01-01

    Energetic ion events in the Earth's dayside subsolar magnetosheath (0900 - 1300 Local Time) are surveyed using data from the Active Magnetospheric Particle Tracer Explorers/Charge Composition Explorer (AMPTE/CCE) Hot Plasma Composition Experiment. Ion species carrying the signature of their origin (O{sup +} and energetic He{sup 2+}) are used to distinguish between magnetospheric and solar wind orgins for the energetic ion events. The results of this survey indicate that the majority of energetic (10-17 keV/e) H{sup +} and He{sup 2+} ions observed in the dayside magnetosheath are accelerated from the solar wind population. The energetic He{sup 2+} to H{sup +} density ratio in the magnetosheath is consistent with that predicted from first-order Fermi acceleration of solar wind ions in the turbulent regions upstream and downstream from the Earth's quasi-parallel bow shock. Although the majority of the energetic ions appear to be of solar wind origin, magnetospheric O{sup +} is also occasionally present in the magnetosheath. The simultaneous occurence of both energetic He{sup 2+} and magnetospheric O{sup +} indicates that, on occasion, both Fermi acceleration of solar wind ions and leakage of magnetospheric ions occurs in the dayside magnetosheath.

  11. Lithium metal doped electrodes for lithium-ion rechargeable chemistry

    Science.gov (United States)

    Liu, Gao; Battaglia, Vince; Wang, Lei

    2016-09-13

    An embodiment of the invention combines the superior performance of a polyvinylidene difluoride (PVDF) or polyethyleneoxide (POE) binder, the strong binding force of a styrene-butadiene (SBR) binder, and a source of lithium ions in the form of solid lithium metal powder (SLMP) to form an electrode system that has improved performance as compared to PVDF/SBR binder based electrodes. This invention will provide a new way to achieve improved results at a much reduced cost.

  12. Metal ions: supporting actors in the playbook of small ribozymes.

    Science.gov (United States)

    Johnson-Buck, Alexander E; McDowell, Sarah E; Walter, Nils G

    2011-01-01

    Since the 1980s, several small RNA motifs capable of chemical catalysis have been discovered. These small ribozymes, composed of between approximately 40 and 200 nucleotides, have been found to play vital roles in the replication of subviral and viral pathogens, as well as in gene regulation in prokaryotes, and have recently been discovered in noncoding eukaryotic RNAs. All of the known natural small ribozymes - the hairpin, hammerhead, hepatitis delta virus, Varkud satellite, and glmS ribozymes--catalyze the same self-cleavage reaction as RNase A, resulting in two products, one bearing a 2'-3' cyclic phosphate and the other a 5'-hydroxyl group. Although originally thought to be obligate metalloenzymes like the group I and II self-splicing introns, the small ribozymes are now known to support catalysis in a wide variety of cations that appear to be only indirectly involved in catalysis. Nevertheless, under physiologic conditions, metal ions are essential for the proper folding and function of the small ribozymes, the most effective of these being magnesium. Metal ions contribute to catalysis in the small ribozymes primarily by stabilizing the catalytically active conformation, but in some cases also by activating RNA functional groups for catalysis, directly participating in catalytic acid-base chemistry, and perhaps by neutralizing the developing negative charge of the transition state. Although interactions between the small ribozymes and cations are relatively nonspecific, ribozyme activity is quite sensitive to the types and concentrations of metal ions present in solution, suggesting a close evolutionary relationship between cellular metal ion homeostasis and cation requirements of catalytic RNAs, and perhaps RNA in general.

  13. Photochromic Terbium Phosphonates with Photomodulated Luminescence and Metal Ion Sensitive Detection.

    Science.gov (United States)

    Yang, Weiting; Tian, Hong-Rui; Li, Jian-Ping; Hui, Yuan-Feng; He, Xiang; Li, Jiyang; Dang, Song; Xie, Zhigang; Sun, Zhong-Ming

    2016-10-17

    Rational selection and modification of rare earth metal centers and photoactive organic linkers enables designable multiphotofunctionality to come to fruition in new hybrid coordination polymer materials. By using a viologen-functionalized diphosphonate linker, two terbium phosphonate compounds (Tb-1 and Tb-2) have been constructed, which display reversible photochromic reactions in response to UV light and soft X-ray irradiation. In addition, the photo-induced electron-transfer reaction can modulate the luminescent emission to thus realize photoluminescence switching behavior. Furthermore, both terbium phosphonates can serve as highly sensitive sensors to probe Cu(2+) in solution through their luminescence. Thus, they represent the first photochromic examples of lanthanide phosphonate-based materials with photomodulated luminescence and sensitive detection of metal ions.

  14. Rare Earth Application in Sealing Anodized Al-Based Metal Matrix Composites

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new method for corrosion protection of Al-based metal matrixcomposites (MMC) was developed using two-step process, which involves anodizing in H2SO4 solution and sealing in rare earth solution. Corrosion resistance of the treated surface was evaluated with polarization curves.The results showed that the effect of the protection using rare earth sealing is equivalent to that using chromate sealing for Al6061/SiCp. The rare earth metal salt can be an alternative to the toxic chromate for sealing anodized Al MMC.

  15. Studies on the Interaction between Catechin and Metal Ions

    Energy Technology Data Exchange (ETDEWEB)

    Yeom, Jieun; Yang, Ikjun; Park, Okhyun; Park, Hyoungryun [Chonnam National Univ., Gwangju (Korea, Republic of); Bark, Kimin [Gyeongsang National Univ., Chinju (Korea, Republic of); Park, Chulho [Nambu Univ., Gwangju (Korea, Republic of)

    2012-12-15

    In conclusion, the UV-vis absorption spectra of the deaerated methanolic solution reacted with metal ions such as Cu{sup 2+}, Zn{sup 2+}, Co{sup 2+}, and Fe{sup 3+} were changed as time passed after adding catechin followed by addition of catechin to methanol. This is strongly dependent not only on the presence of metal ion but on the storage time of the solution. The change has relevance to the oxidation of catechin. Oxidation of catechin is first initiated by the dissociation of -OH part of the catechol moiety in methanol and then the ionized anion forms are converted into their oxidized forms called quinones. The higher the standard reduction potential for metal-ion, the faster the oxidation occurs. The steady-state fluorescence emission spectra of catechin changed depending on the storage time of the solution. This finding indicates that oxidation of catechin is undergone by a sequence of multistep reactions in deaerated methanol solution.

  16. High-purity rare-earth metals: preparation, properties, and application

    Institute of Scientific and Technical Information of China (English)

    Kol'chugina; N.; B.; Burkhanov; G.; S.; Chistyakov; O.; D.; Burkhanov; Yu.; S.

    2005-01-01

    In recent years, the ever-growing interest of investigators to the study of rare-earth metals REM) is observed owing to unique properties of the metals and potential uses in electronics, laser technology, space technology, medicine, and many other high-technology applications.……

  17. High-purity rare-earth metals: preparation, properties, and application

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ In recent years, the ever-growing interest of investigators to the study of rare-earth metals REM) is observed owing to unique properties of the metals and potential uses in electronics, laser technology, space technology, medicine, and many other high-technology applications.

  18. 40 CFR 421.270 - Applicability: Description of the primary rare earth metals subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability: Description of the primary rare earth metals subcategory. 421.270 Section 421.270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT...

  19. Nanocrystalline rare earth fluorides doped with Pr3+ions

    Institute of Scientific and Technical Information of China (English)

    Marcin Runowski; Stefan Lis

    2016-01-01

    Praseodymium(III) doped CeF3, CeF3:Gd, LaF3, GdF3 and YF3 inorganic fluorides were precipitated in an aqueous, sur-factant-free solution, using NH4F as a source of fluoride ions. The as-prepared products were subjected to a hydrothermal treatment, which led to the formation of crystalline nanoluminophores, composed of spherical (≈30 nm) and elongated (≈40–200 nm) nanos-tructures. Due to the presence of Pr3+ions, the synthesized nanomaterials showed yellow luminescence under a blue light irradiation. The nanoluminophore based on the YF3 host revealed the most promising spectroscopic properties, i.e., bright and intensive emission, hence it was investigated in detail. The photophysical properties of the nanomaterials obtained were studied by powder X-ray diffrac-tion (XRD), transmission electron microscopy (TEM) and spectrofluorometry, i.e., measurements of excitation/emission spectra and luminescence decay curves.

  20. Selective ion exchange recovery of rare earth elements from uranium mining solutions

    Science.gov (United States)

    Rychkov, Vladimir N.; Kirillov, Evgeny V.; Kirillov, Sergey V.; Bunkov, Grigory M.; Mashkovtsev, Maxim A.; Botalov, Maxim S.; Semenishchev, Vladimir S.; Volkovich, Vladimir A.

    2016-09-01

    A comparative study of rare earth, ferric and aluminum ions ion exchange behavior on gel sulfonated p;olystyrene cation exchange resins depending on the degree of the matrix cross-linking and pH of the solution is presented. Selective ion exchange of REEs is possible at the pH range of 1.5-2.0 using strongly acidic cation exchange resins containing more than 8 % of DVB. The preliminary results of testing the efficiency of REEs recovery from the industrial uranium underground leaching solutions are also presented.

  1. Electrospray Ionization Mass Spectrometry: From Cluster Ions to Toxic metal Ions in Biology

    Energy Technology Data Exchange (ETDEWEB)

    Lentz, Nicholas B. [Iowa State Univ., Ames, IA (United States)

    2007-01-01

    This dissertation focused on using electrospray ionization mass spectrometry to study cluster ions and toxic metal ions in biology. In Chapter 2, it was shown that primary, secondary and quarternary amines exhibit different clustering characteristics under identical instrument conditions. Carbon chain length also played a role in cluster ion formation. In Chapters 3 and 4, the effects of solvent types/ratios and various instrumental parameters on cluster ion formation were examined. It was found that instrument interface design also plays a critical role in the cluster ion distribution seen in the mass spectrum. In Chapter 5, ESI-MS was used to investigate toxic metal binding to the [Gln11]-amyloid β-protein fragment (1-16). Pb and Cd bound stronger than Zn, even in the presence of excess Zn. Hg bound weaker than Zn. There are endless options for future work on cluster ions. Any molecule that is poorly ionized in positive ion mode can potentially show an increase in ionization efficiency if an appropriate anion is used to produce a net negative charge. It is possible that drug protein or drug/DNA complexes can also be stabilized by adding counter-ions. This would preserve the solution characteristics of the complex in the gas phase. Once in the gas phase, CID could determine the drug binding location on the biomolecule. There are many research projects regarding toxic metals in biology that have yet to be investigated or even discovered. This is an area of research with an almost endless future because of the changing dynamics of biological systems. What is deemed safe today may show toxic effects in the future. Evolutionary changes in protein structures may render them more susceptible to toxic metal binding. As the understanding of toxicity evolves, so does the demand for new toxic metal research. New instrumentation designs and software make it possible to perform research that could not be done in the past. What was undetectable yesterday will

  2. Impact of the spectroscopic properties of rare-earth ions on solid-state laser systems

    NARCIS (Netherlands)

    Pollnau, M.

    2003-01-01

    The electronic energy level schemes within the 4f subshells of rare-earth ions give rise to a number of fluorescence transitions ranging from the near-UV to the mid-IR spectral region. A large variety of laser lines have been demonstrated based on these fluorescence transitions. Depending on the ene

  3. Performance and Comparison of Lithium-Ion Batteries Under Low-Earth-Orbit Mission Profiles

    Science.gov (United States)

    Reid, Concha M.; Smart, Marshall C.; Bugga, Ratnakumar V.; Manzo, Michelle A.; Miller, Thomas B.; Gitzendanner, Rob

    2007-01-01

    The performance of two 28 V, 25 Ah lithium-ion batteries is being evaluated under low-Earth-orbit mission profiles for satellite and orbiter applications. The batteries are undergoing life testing and have achieved over 12,000 cycles to 40 percent depth-of-discharge.

  4. Progress of Study on Application of Rare Earth Metals in Steels

    Institute of Scientific and Technical Information of China (English)

    Wang Longmei; Lin Qin; Ji Jingwen; Lan Denian

    2004-01-01

    With the improvement of the clean steel by degrees, the functions of rare earth metals in steel are more focused on modification of inclusions and micro alloying.The new study concerning the application of RE metals in clean steels were investigated by ICP, metallographic examination, SEM, EDS, EPMA, TEM and IMMA.The mechanism of corrosion resistance in the weather resistance steel was clarified.The mechanism of abrasion resistance and the life of fatigue enhanced in the RE - heavy rails steel were discussed.Progress in study of application of rare earth metals in steels (including weather resistance steel, low alloy steel, and heavy rails steel) was covered in this paper.

  5. Energetics and bonding in aluminosilicate rings with alkali metal and alkaline-earth metal charge-compensating cations.

    Science.gov (United States)

    Gatti, Carlo; Ottonello, Giulio; Richet, Pascal

    2012-08-23

    The stabilizing effect of alkali and alkaline-earth metal ions on the oxygen donors of four- and six-membered faujausite-like rings has been calculated in terms of Kohn-Sham core-level (O1s) energy shifts with respect to these same complexes without cations. The results confirm and complement earlier investigations by Vayssilov and co-workers where Na(+) and K(+) were the only complexing cations. The oxygen donor centers in six-membered rings are stabilized by -3.6 ± 0.4, -3.9 ± 0.5, -7.3 ± 0.1, and -7.6 ± 0.2 eV by K(+), Na(+), Ca(2+), and Mg(2+) adions, respectively. The energy shifts are even greater for four-membered rings where the stabilization effects attain -3.7 ± 0.1, -4.1 ± 0.1, -8.1 ± 0.1, and -9.0 ± 0.1 eV, respectively. These effects are also observed on the low-lying σ-bonding and antibonding molecular orbitals (MOs) of the oxygen framework, but in a less systematic fashion. Clear relationships with the core-level shifts are found when the effects of alkali metal complexation are evaluated through electron localization/delocalization indices, which are defined in terms of the whole wave function and not just of the individual orbitals. Complexation with cations not only involves a small but significant electron sharing of the cation with the oxygen atoms in the ring but also enhances electron exchange among oxygen atoms while reducing that between the O atoms and the Si or Al atoms bonded to them. Such changes slightly increase from Na to K and from Mg to Ca, whereas they are significantly enhanced for alkaline-earth metals relative to alkali metals. With respect to Al-free complexes, Si/Al substitution and cation charge compensation generally enhance electron delocalization among the O atoms, except between those that are linked through an Al atom, and cause either an increased or a decreased Si-O ionicity (smaller/higher electron exchange) depending on the position of O in the chain relative to the Al atom(s). The generally increased

  6. Effect of impurity ions on preparation of novel saponifier for rare earth extraction

    Institute of Scientific and Technical Information of China (English)

    肖燕飞; 冯宗玉; 黄小卫; 黄莉; 徐旸; 侯永可; 王猛

    2013-01-01

    Magnesium bicarbonate, prepared by the carbonation of magnesium hydroxide slurry, was used as a novel saponifier to eliminate the ammonia nitrogen pollution in the rare earth extraction separation process. The effect of impurity ions introduced by system on the carbonation reaction of magnesium hydroxide was studied in the work. The results showed that the presence of Ca2+could lead to side reactions so as to reduce the conversion rate of magnesium hydroxide, and a small number of rare earth ions would have great influence on the carbonation reaction. What’s more, there was no influence on carbonation reaction with the low concen-tration of Na+or Mg2+, the conversion rate of magnesium hydroxide could reach above 96%. This paper showed a practical theory which could provide scientific guidance for the preparation of novel saponifier in rare earth extraction separation process.

  7. Crystal Fields in Dilute Rare-Earth Metals Obtained from Magnetization Measurements on Dilute Rare-Earth Alloys

    DEFF Research Database (Denmark)

    Touborg, P.; Høg, J.

    1974-01-01

    Crystal field parameters of Tb, Dy, and Er in Sc, Y, and Lu are summarized. These parameters are obtained from magnetization measurements on dilute single crystals, and successfully checked by a number of different methods. The crystal field parameters vary unpredictably with the rare-earth solute....... B40, B60, and B66 are similar in Y and Lu. Crystal field parameters for the pure metals Tb, Dy, and Er are estimated from the crystal fields in Y and Lu....

  8. A rare-earth-magnet ion trap for confining low-Z, bare nuclei

    Science.gov (United States)

    Brewer, Samuel M.; Tan, Joseph N.

    2009-05-01

    Simplifications in the theory for Rydberg states of hydrogenlike ions allow a substantial improvement in the accuracy of predicted levels, which can yield information on the values of fundamental constants and test theory if they can be compared with precision frequency measurements.[1] We consider the trapping of bare nuclei (fully-stripped) to be used in making Rydberg states of one-electron ions with atomic number 1earth permanent magnets, and to model the capture of charge-state-selected ions extracted from an electron beam ion trap (EBIT). An experimental apparatus adapted to the NIST EBIT will also be discussed. Reference: [1] U.D. Jentschura, P.J. Mohr, J.N. Tan, and B.J. Wundt, ``Fundamental constants and tests of theory in Rydberg states of hydrogenlike ions,'' Phys. Rev. Lett. 100, 160404 (2008).

  9. Observational evidence on the origin of ions upstream of the earth's bow shock

    Science.gov (United States)

    Thomsen, M. F.; Gosling, J. T.; Schwartz, S. J.

    1983-01-01

    The kinematic formalism described by Schwartz et al. (1983) is used to quantitatively compare the zeroth order predicted energies for four different source hypotheses for ions detected upstream of the earth's bow shock with previously published observations of upstream field-aligned beams and gyrating ion events. Specular reflection of a fraction of the incident solar wind is found to be the most credible explanation of gyrating ion events observed upstream of shocks ranging from quasi-parallel to nearly perpendicular. The recent hypothesis that field-aligned beams are the result of leakage from the magnetosheath of ions which were originally specularly reflected at quasi-perpendicular portions of the shock provides good agreement with observed energies of many field-aligned beams. Only magnetic moment conserving reflection of solar wind ions is capable of accounting for two very energetic beam events.

  10. Metal-silicate partitioning during core formation on super-Earths

    Science.gov (United States)

    Schaefer, L. K.; Jacobsen, S. B.; Petaev, M. I.; Sasselov, D. D.; Remo, J. L.

    2015-12-01

    Separation of the Earth into a rocky mantle and metallic Fe core is a problem long studied in the planetary science community (e.g. [1]). The timing of core formation influences the abundances of the siderophile elements found in the Earth's mantle, and the mechanism of core formation influences the degree of chemical equilibration between the rocky mantle and the core at the time of metal separation. However, limited work has been done on formation of metallic cores and its effects on mantle chemistry in rocky planets larger than the Earth. Super-Earths, exoplanets with masses up to ~ 5 Earth masses and radii up to ~1.6-1.7 Earth radii, have significantly larger internal pressures and consequently higher internal temperatures than the Earth, therefore conclusions from Earth-centric studies of core formation may be erroneous. Partitioning coefficients for many of the relevant elements (e.g. Fe, Ni, Si, O, etc.) are available in the literature, but only to relatively low pressures. The relevant pressures for super-Earths are significantly larger. However, data on Fe-O-Ni-Si partitioning at pressures (200-500 GPa) and temperatures relevant to super-Earths have been measured by laser-induced shocks with the ZBL laser at Sandia National Laboratory with a method described in [2]. We will present a model which integrates this data with lower pressure partition coefficients from the literature (e.g. [3],[4],[5]), with special emphasis on Fe and O, to describe partitioning behavior at high pressures and discuss its implications for core size and composition on rocky super-Earths. [1] Ringwood, A.E. (1977) Geochem. J. 11, 111-135. [2] Remo, J.L., Petaev, M.I., Jacobsen, S. B. (2008) LPSC abstract, 1420. [3] Frost, D.J. et al. (2010) JGR, B02202. [4] Kombayashi, T. (2014) JGR, 4164-4177. [5] Rubie, D.C. et al. (2011) EPSL, 301, 31-42. [5

  11. Angular resolved energy analysis of /sup 69/Ga/sup +/ions from a gallium liquid metal ion source

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, P.

    1987-11-01

    An analysis system has been designed and built to characterise liquid metal ion source beams. Both mass and angular resolved energy distribution measurements can be made, from which both FWHM energy spreads and energy deficits can be obtained. This paper briefly describes the system and presents and discusses the first off-axis results taken with a gallium liquid metal ion source.

  12. Headgroup interactions and ion flotation efficiency in mixtures of a chelating surfactant, different foaming agents, and divalent metal ions.

    Science.gov (United States)

    Svanedal, Ida; Boija, Susanne; Norgren, Magnus; Edlund, Håkan

    2014-06-10

    The correlation between interaction parameters and ion flotation efficiency in mixtures of chelating surfactant metal complexes and different foaming agents was investigated. We have recently shown that chelating surfactant 2-dodecyldiethylenetriaminepentaacetic acid (4-C12-DTPA) forms strong coordination complexes with divalent metal ions, and this can be utilized in ion flotation. Interaction parameters for mixed micelles and mixed monolayer formation for Mg(2+) and Ni(2+) complexes with the chelating surfactant 4-C12-DTPA and different foaming agents were calculated by Rubingh's regular solution theory. Parameters for the calculations were extracted from surface tension measurements and NMR diffusometry. The effects of metal ion coordination on the interactions between 4-C12-DTPA and the foaming agents could be linked to a previously established difference in coordination chemistry between the examined metal ions. As can be expected from mixtures of amphoteric surfactants, the interactions were strongly pH-dependent. Strong correlation was found between interaction parameter β(σ) for mixed monolayer formation and the phase-transfer efficiency of Ni(2+) complexes with 4-C12-DTPA during flotation in a customized flotation cell. In a mixture of Cu(2+) and Zn(2+), the significant difference in conditional stability constants (log K) between the metal complexes was utilized to selectively recover the metal complex with the highest log K (Cu(2+)) by ion flotation. Flotation experiments in an excess concentration of metal ions confirmed the coordination of more than one metal ion to the headgroup of 4-C12-DTPA.

  13. Studies of the Core Conditions of the Earth and Super-Earths Using Intense Ion Beams at FAIR

    Science.gov (United States)

    Tahir, N. A.; Lomonosov, I. V.; Borm, B.; Piriz, A. R.; Shutov, A.; Neumayer, P.; Bagnoud, V.; Piriz, S. A.

    2017-09-01

    Using detailed numerical simulations, we present the design of an experiment that will generate samples of iron under extreme conditions of density and pressure believed to exist in the interior of the Earth and interior of extrasolar Earth-like planets. In the proposed experiment design, an intense uranium beam is used to implode a multilayered cylindrical target that consists of a thin Fe cylinder enclosed in a thick massive W shell. Such intense uranium beams will be available at the heavy-ion synchrotron, SIS100, at the Facility for Antiprotons and Ion Research (FAIR), at Darmstadt, which is under construction and will become operational in the next few years. It is expected that the beam intensity will increase gradually over a couple of years to its maximum design value. Therefore, in our studies, we have considered a wide range of beam parameters, from the initial beam intensity (“Day One”) to the maximum specified value. It is also worth noting that two different focal spot geometries have been used. In one case, a circular focal spot with a Gaussian transverse intensity distribution is considered, whereas in the other case, an annular focal spot is used. With these two beam geometries, one can access different parts of the Fe phase diagram. For example, heating the sample with a circular focal spot generates a hot liquid state, while an annular focal spot can produce a highly compressed liquid or a highly compressed solid phase depending on the beam intensity.

  14. The electron-transfer based interaction between transition metal ions and photoluminescent graphene quantum dots (GQDs): a platform for metal ion sensing.

    Science.gov (United States)

    Huang, Hongduan; Liao, Lei; Xu, Xiao; Zou, Mingjian; Liu, Feng; Li, Na

    2013-12-15

    The electron-transfer based quenching effect of commonly encountered transition metal ions on the photoluminescence of grapheme quantum dots (GQDs) was for the first time investigated, and was found to be associated with electron configuration of the individual metal ion. Ethylene diamine tetraacetic acid (EDTA), the metal ion chelator, can competitively interact with metal ions to recover the quenched photoluminescence of GQDs. Basically, metal ions with empty or completely filled d orbits could not quench the photoluminescence of GQDs, but this quenching effect was observed for the metal ions with partly filled d orbits. Based on the quenching-recovering strategy, a simple optical metal sensing platform was established by taking Ni(2+) as an example. Using the nickel ion-specific chelating reagent, dimethylglyoxime (DMG), to replace EDTA, a detection limit of 4.1 μM was obtained in standard solution. This proposed strategy does not need further functionalization of GQDs, facilitating the application for simple, fast and cost-effective screening of metal ions.

  15. The kinetics of bivalent metal ion dissociation from myosin subfragments.

    Science.gov (United States)

    Bennett, A J; Bagshaw, C R

    1986-01-01

    Bivalent metal ions have multiple roles in subunit association and ATPase regulation in scallop adductor-muscle myosin. To help elucidate these functions, the rates of Ca2+ and Mg2+ dissociation from the non-specific high-affinity sites on the regulatory light chains were measured and compared with those of rabbit skeletal-muscle myosin subfragments. Ca2+ dissociation had a rate constant of about 0.7 s-1 in both species, as measured by the time course of the pH change on EDTA addition. Mg2+ dissociation had a rate constant of 0.05 s-1, as monitored by its displacement with the paramagnetic Mn2+ ion. It is concluded that the exchange between Ca2+ and Mg2+ at the non-specific site, on excitation of both skeletal and adductor muscles, is too slow to contribute to the activation itself. The release of bivalent metal ions from the non-specific site is, however, the first step in release of the scallop regulatory light chain (Bennett & Bagshaw (1986) Biochem. J. 233, 179-186). In scallop myosin additional specific sites are present, which can bind Ca2+ rapidly, to effect activation of the ATPase. In the course of this work, Ca2+ dissociation from EGTA was studied as a model system. This gave rates of 1 s-1 and 0.3 s-1 at pH 7.0 and pH 8.0 respectively.

  16. DNA strand breakage by bivalent metal ions and ionizing radiation.

    Science.gov (United States)

    Ayene, Iraimoudi S; Koch, Cameron J; Krisch, Robert E

    2007-03-01

    To investigate mechanisms of DNA breakage via the interaction of bivalent metal ion, thiol reducing agent and ionizing radiation, in *OH scavenging abilities comparable to those in cells. We measured the effects of 10 min exposure to 200 microM Fe2+ vs. Fe3+ on the induction of single (SSB) and double (DSB) strand breaks in unirradiated and oxically irradiated SV40 DNA, in aqueous solution containing 75 or 750 mM glycerol and/or 5 mM glutathione (GSH). Fe2+ or GSH alone produced little DNA damage. However, their combination produced a dramatic increase in the production of both SSB and DSB. Experiments with ferric ion suggest that it produces DNA damage only after partial reduction to ferrous by GSH. Induction efficiencies for SSB in the presence of Fe2+/GSH showed additivity of the effects of radiation alone with those from Fe2+/GSH. However, the corresponding induction efficiencies for DSB demonstrated a 2.5-fold enhancement. Our results are consistent with a model in which reduced bivalent metal ions plus thiols, in the presence of O2, produce DSB in DNA primarily via local clusters of hydroxyl radicals arising from site specific Fenton reactions. The synergism observed between DSB production by Fe/GSH and by ionizing radiation, also believed to occur via local clusters of hydroxyl radicals, is consistent with this model. Our results suggest that both normally present intracellular iron and ionizing radiation may be important sources of oxidative stress in cells.

  17. Proton and heavy ion acceleration by stochastic fluctuations in the Earth's magnetotail

    Energy Technology Data Exchange (ETDEWEB)

    Catapano, Filomena; Zimbardo, Gaetano; Perri, Silvia; Greco, Antonella [Calabria Univ., Rende (Italy). Dept. of Physics; Artemyev, Anton V. [Russian Academy of Science, Moscow (Russian Federation). Space Research Inst.; California Univ., Los Angeles, CA (United States). Dept. of Earth, Planetary, and Space Science and Inst. of Geophysics and Planetary Physics

    2016-07-01

    Spacecraft observations show that energetic ions are found in the Earth's magnetotail, with energies ranging from tens of keV to a few hundreds of keV. In this paper we carry out test particle simulations in which protons and other ion species are injected in the Vlasov magnetic field configurations obtained by Catapano et al. (2015). These configurations represent solutions of a generalized Harris model, which well describes the observed profiles in the magnetotail. In addition, three-dimensional time-dependent stochastic electromagnetic perturbations are included in the simulation box, so that the ion acceleration process is studied while varying the equilibrium magnetic field profile and the ion species. We find that proton energies of the order of 100 keV are reached with simulation parameters typical of the Earth's magnetotail. By changing the ion mass and charge, we can study the acceleration of heavy ions such as He{sup ++} and O{sup +}, and it is found that energies of the order of 100-200 keV are reached in a few seconds for He{sup ++}, and about 100 keV for O{sup +}.

  18. Chemoselective single-site Earth-abundant metal catalysts at metal–organic framework nodes

    Energy Technology Data Exchange (ETDEWEB)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin (UC)

    2016-08-30

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal–organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C–H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  19. Metal ion enhanced binding of AMD3100 to Asp262 in the CXCR4 receptor

    DEFF Research Database (Denmark)

    Gerlach, Lars Ole; Jakobsen, Janus S; Jensen, Kasper P;

    2003-01-01

    +), Zn(2+), or Ni(2+) into the cyclam rings of the compound. The rank order of the transition metal ions correlated with the calculated binding energy between free acetate and the metal ions coordinated in a cyclam ring. Construction of AMD3100 substituted with only a single Cu(2+) or Ni(2+) ion...... demonstrated that the increase in binding affinity of the metal ion substituted bicyclam is achieved through an enhanced interaction of just one of the ring systems. Mutational analysis of potential metal ion binding residues in the main ligand binding crevice of the CXCR4 receptor showed that although binding...... of the bicyclam is dependent on both Asp(171) and Asp(262), the enhancing effect of the metal ion was selectively eliminated by substitution of Asp(262) located at the extracellular end of TM-VI. It is concluded that the increased binding affinity of the metal ion substituted AMD3100 is obtained through enhanced...

  20. Microbial manganese oxide formation and interaction with toxic metal ions.

    Science.gov (United States)

    Miyata, Naoyuki; Tani, Yukinori; Sakata, Masahiro; Iwahori, Keisuke

    2007-07-01

    Diverse bacteria and fungi oxidize Mn(II) enzymatically and produce insoluble Mn(III, IV) oxides, and these organisms are considered to be the primal agents for the occurrence of natural Mn oxide phases in most environments. Biogenic Mn oxides have a high sorption capacity for metal cations and an ability to oxidize numerous inorganic and organic compounds, owing to their structural and redox features. Thus, the microbial process is of significance in both biogeochemical and biotechnological contexts. In this article we summarize the enzymatic Mn(II) oxidation and interactions of biogenic Mn oxides with toxic metal and metalloid ions. Although Mn oxide formation by fungi has not been fully characterized yet, recent researches with ascomycetes emphasize the similarity between the bacterial and fungal Mn(II) oxidation with respect to the involved catalyst (i.e., multicopper oxidase-type enzymes) and the reaction product [i.e., layer-type Mn(IV) oxides]. Laboratory cultures of bacterial and fungal Mn oxidizers are expected to provide fundamental knowledge in their potential use for remediation of environments and effluents contaminated with toxic metal(loid) ions.

  1. A new N-hydroxyethyliminodiacetic acid modified core-shell silica phase for chelation ion chromatography of alkaline earth, transition and rare earth elements.

    Science.gov (United States)

    McGillicuddy, Nicola; Nesterenko, Ekaterina P; Nesterenko, Pavel N; Stack, Elaine M; Omamogho, Jesse O; Glennon, Jeremy D; Paull, Brett

    2013-12-20

    Bare core-shell silica (1.7μm) has been modified with iminodiacetic acid functional groups via standard silane chemistry, forming a new N-hydroxyethyliminodiacetic acid (HEIDA) functionalised core-shell stationary phase. The column was applied in high-performance chelation ion chromatography and evaluated for the retention of alkaline earth, transition and heavy metal cations. The influence of nitric acid eluent concentration, addition of complexing agent dipicolinic acid, eluent pH and column temperature on the column performance was investigated. The efficiencies obtained for transition and heavy metal cations (and resultant separations) were comparable or better than those previously obtained for alternative fully porous silica based chelation stationary phases, and a similarly modified monolithic silica column, ranging from ∼15 to 56μm HETP. Increasing the ionic strength of the eluent with the addition of KNO3 (0.75M) and increasing the column temperature (70°C) facilitated the isocratic separation of a mixture of 14 lanthanides and yttrium in under 12min, with HETP averaging 18μm (7μm for Ce(III)). Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Fluorescent sensing and determination of mercury (II) ions in water

    African Journals Online (AJOL)

    2011-11-28

    Nov 28, 2011 ... towards the mercury (II) ion among various alkali, alkaline earth, and transition metal ions. The mercury (II) .... the metal stock solution was added to 13 separate test tubes. The test ..... positive curvature in Stern-Volmer plots.

  3. Effect of transition metal ions on the conductivity and stability of stabilized zirconia

    DEFF Research Database (Denmark)

    Lybye, D.; Mogensen, Mogens Bjerg

    2007-01-01

    the effect of co-doping with smaller transition metal ions such as Ti-, Fe- and Mn-ions. Many of the ionic radii of the transition metal ions are too small compared to the host lattice ionic radius of zirconium. Here we explore the effect of a) the small ionic radii compared to the large ionic radii...

  4. The Effect of Complex Formation upon the Redox Potentials of Metallic Ions. Cyclic Voltammetry Experiments.

    Science.gov (United States)

    Ibanez, Jorge G.; And Others

    1988-01-01

    Describes experiments in which students prepare in situ soluble complexes of metal ions with different ligands and observe and estimate the change in formal potential that the ion undergoes upon complexation. Discusses student formation and analysis of soluble complexes of two different metal ions with the same ligand. (CW)

  5. Hydration number of alkali metal ions determined by insertion in a conducting polymer

    DEFF Research Database (Denmark)

    Skaarup, Steen

    2008-01-01

    . The solvation of alkali metal ions has been discussed for many years without a clear consensus. This work presents a systematic study of the hydration numbers of the 5 alkali metal ions, using the electrochemical insertion of the ions in a conducting polymer (polypyrrole containing the large immobile anion DBS...

  6. The Effect of Complex Formation upon the Redox Potentials of Metallic Ions. Cyclic Voltammetry Experiments.

    Science.gov (United States)

    Ibanez, Jorge G.; And Others

    1988-01-01

    Describes experiments in which students prepare in situ soluble complexes of metal ions with different ligands and observe and estimate the change in formal potential that the ion undergoes upon complexation. Discusses student formation and analysis of soluble complexes of two different metal ions with the same ligand. (CW)

  7. Stability of Rare Earth Ion-N,N′-bis(2′-Pyridine)methyl-1,10-Phenanthroline-2,9-Dimethanmine Binary Complexes

    Institute of Scientific and Technical Information of China (English)

    刘天府; 王中明; 林华宽; 朱守荣; 徐猛; 陈云悌

    2003-01-01

    The stability constants of binary complexes Ln-L (Ln=La3+, Ce3+, Pr3+, Nd3+, Sm3+, Eu3+, Gd3+, Tb3+, Dy3+, Ho3+, L=N, N′-bis(2′-pyridine)methyl-1,10-phenanthroline-2,9- dimethanamine) were determined by pH potentiometric titration method at 25±0.1 ℃ in 0.1 mol*L-1 NaClO4. The probable structures of the corresponding complexes were proposed. The influence of the metal ions to the stability of binary complexes and the stability difference between the complexes of rare earth ion and the corresponding complexes of Co2+, Ni2+, Cu2+ ions were discussed. The stability constants of the corresponding binary complex of radioactive Pm3+ ion were estimated by linear regression.

  8. Environmental Defects And Economic Impact On Global Market Of Rare Earth Metals

    Science.gov (United States)

    Charalampides, G.; Vatalis, K.; Karayannis, V.; Baklavaridis, A.

    2016-11-01

    Rare earth elements include the 14 lanthanides as well as lanthanium and often yttrium. Actually, most of them are not very rare and occur widely dispersed in a variety of rocks. Rare earth metals are vital to some of the world's faster growing industries: catalysts, Nd-magnets, ceramics, glass, metallurgy, battery alloys, electronics and phosphors. Worldwide, the main countries for distribution of rare earths deposits include China, USA, Russia, Brasil, India, Australia, Greenland and Malaysia. The mining and processing of rare earth metals usually result in significant environmental defects. Many deposits are associated with high concentrations of radioactive elements such as uranium and thorium, which requires separate treatment and disposal. The accumulation of rare earth elements in soils has occurred due to pollution caused by the exploitation of rare earth resources and the wide use of rare earths as fertilizers in agriculture. This accumulation has a toxic effect on the soil microfauna community. However, there are large differences in market prices due to the degree of purity determined by the specifications in the applications. The main focus of this article is to overview Rare Earth Metals’ overall impact on global economy and their environmental defects on soils during processing techniques and as they are used as fertilizers.

  9. Lanthanide metal-organic frameworks as selective microporous materials for adsorption of heavy metal ions.

    Science.gov (United States)

    Jamali, Abbas; Tehrani, Alireza Azhdari; Shemirani, Farzaneh; Morsali, Ali

    2016-06-14

    Four microporous lanthanide metal-organic frameworks (MOFs), namely Ln(BTC)(H2O)(DMF)1.1 (Ln = Tb, Dy, Er and Yb, DMF = dimethylformamide, H3BTC = benzene-1,3,5-tricarboxylic acid), have been used for selective adsorption of Pb(ii) and Cu(ii). Among these MOFs, the Dy-based MOF shows better adsorption property and selectivity toward Pb(ii) and Cu(ii) ions. Adsorption isotherms indicate that sorption of Pb(ii) and Cu(ii) on MOFs is via monolayer coverage. Preconcentration is based on solid-phase extraction in which MOFs were rapidly injected into water samples and adsorption of metal ions was rapid because of good contact with analyte; then adsorbed Pb(ii) and Cu(ii) ions were analyzed by FAAS. The optimized methodology represents good linearity between 1 and 120 μg L(-1) and detection limit of 0.4 and 0.26 μg L(-1) for Pb(ii) and Cu(ii), respectively. Subsequently the method was evaluated for preconcentration of target metal ions in some environmental water samples.

  10. Alloying of metal nanoparticles by ion-beam induced sputtering

    Science.gov (United States)

    Magudapathy, P.; Srivastava, S. K.; Gangopadhyay, P.; Amirthapandian, S.; Saravanan, K.; Das, A.; Panigrahi, B. K.

    2017-01-01

    Ion-beam sputtering technique has been utilized for controlled synthesis of metal alloy nanoparticles of compositions that can be tuned. Analysis of various experimental results reveals the formation of Ag-Cu alloy nanoparticles on a silica substrate. Surface-plasmon optical resonance positions and observed shifts of Ag Bragg angles in X-ray diffraction pattern particularly confirm formation of alloy nanoparticles on glass samples. Sputtering induced nano-alloying mechanism has been discussed and compared with thermal mixing of Ag and Cu thin films on glass substrates. Compositions and sizes of alloy nanoparticles formed during ion-beam induced sputtering are found to exceed far from the values of thermal mixing.

  11. Metal-organic frameworks for lithium ion batteries and supercapacitors

    Science.gov (United States)

    Ke, Fu-Sheng; Wu, Yu-Shan; Deng, Hexiang

    2015-03-01

    Porous materials have been widely used in batteries and supercapacitors attribute to their large internal surface area (usually 100-1000 m2 g-1) and porosity that can favor the electrochemical reaction, interfacial charge transport, and provide short diffusion paths for ions. As a new type of porous crystalline materials, metal-organic frameworks (MOFs) have received huge attention in the past decade due to their unique properties, i.e. huge surface area (up to 7000 m2 g-1), high porosity, low density, controllable structure and tunable pore size. A wide range of applications including gas separation, storage, catalysis, and drug delivery benefit from the recent fast development of MOFs. However, their potential in electrochemical energy storage has not been fully revealed. Herein, the present mini review appraises recent and significant development of MOFs and MOF-derived materials for rechargeable lithium ion batteries and supercapacitors, to give a glimpse into these potential applications of MOFs.

  12. Metal-organic frameworks for lithium ion batteries and supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Ke, Fu-Sheng; Wu, Yu-Shan; Deng, Hexiang, E-mail: hdeng@whu.edu.cn

    2015-03-15

    Porous materials have been widely used in batteries and supercapacitors attribute to their large internal surface area (usually 100–1000 m{sup 2} g{sup −1}) and porosity that can favor the electrochemical reaction, interfacial charge transport, and provide short diffusion paths for ions. As a new type of porous crystalline materials, metal-organic frameworks (MOFs) have received huge attention in the past decade due to their unique properties, i.e. huge surface area (up to 7000 m{sup 2} g{sup −1}), high porosity, low density, controllable structure and tunable pore size. A wide range of applications including gas separation, storage, catalysis, and drug delivery benefit from the recent fast development of MOFs. However, their potential in electrochemical energy storage has not been fully revealed. Herein, the present mini review appraises recent and significant development of MOFs and MOF-derived materials for rechargeable lithium ion batteries and supercapacitors, to give a glimpse into these potential applications of MOFs. - Graphical abstract: MOFs with large surface area and high porosity can offer more reaction sites and charge carriers diffusion path. Thus MOFs are used as cathode, anode, electrolyte, matrix and precursor materials for lithium ion battery, and also as electrode and precursor materials for supercapacitors. - Highlights: • MOFs have potential in electrochemical area due to their high porosity and diversity. • We summarized and compared works on MOFs for lithium ion battery and supercapacitor. • We pointed out critical challenges and provided possible solutions for future study.

  13. Maternal exposure to alkali, alkali earth, transition and other metals: Concentrations and predictors of exposure.

    Science.gov (United States)

    Hinwood, A L; Stasinska, A; Callan, A C; Heyworth, J; Ramalingam, M; Boyce, M; McCafferty, P; Odland, J Ø

    2015-09-01

    Most studies of metals exposure focus on the heavy metals. There are many other metals (the transition, alkali and alkaline earth metals in particular) in common use in electronics, defense industries, emitted via combustion and which are naturally present in the environment, that have received limited attention in terms of human exposure. We analysed samples of whole blood (172), urine (173) and drinking water (172) for antimony, beryllium, bismuth, cesium, gallium, rubidium, silver, strontium, thallium, thorium and vanadium using ICPMS. In general most metals concentrations were low and below the analytical limit of detection with some high concentrations observed. Few factors examined in regression models were shown to influence biological metals concentrations and explained little of the variation. Further study is required to establish the source of metals exposures at the high end of the ranges of concentrations measured and the potential for any adverse health impacts in children.

  14. Metal loading effect on rare earth element binding to humic acid: Experimental and modelling evidence

    Science.gov (United States)

    Marsac, Rémi; Davranche, Mélanie; Gruau, Gérard; Dia, Aline

    2010-03-01

    The effect of metal loading on the binding of rare earth elements (REE) to humic acid (HA) was studied by combining ultrafiltration and Inductively Coupled Plasma Mass Spectrometry techniques. REE-HA complexation experiments were performed at pH 3 for REE/C molar ratios ranging from ca 4 × 10 -4 to 2.7 × 10 -2. Results show that the relative amount of REE bound to HA strongly increases with decreasing REE/C. A middle-REE (MREE) downward concavity is shown by patterns at high metal loading, whereas patterns at low metal loading display a regular increase from La to Lu. Humic Ion Model VI modelling are close to the experimental data variations, provided that (i) the ΔLK 2 parameter (i.e. the Model VI parameter taken into account the presence of strong but low density binding sites) is allowed to increase regularly from La to Lu (from 1.1 to 2.1) and (ii) the published log KMA values (i.e. the REE-HA binding constants specific to Model VI) are slightly modified, in particular with respect to heavy REE. Modelling approach provided evidence that logKdREE patterns with varying REE/C likely arises because REE binding to HA occurs through two types of binding sites in different density: (i) a few strong sites that preferentially complex the heavy REE and thus control the logKdREE atterns at low REE/C; (ii) a larger amount of weaker binding sites that preferentially complex the middle-REE and thus control the logKdREE pattern at high REE/C. Hence, metal loading exerts a major effect on HA-mediated REE binding, which could explain the diversity of published conditional constants for REE binding with HA. A literature survey suggests that the few strong sites activated at low REE/C could be multidentate carboxylic sites, or perhaps N-, or P-functional groups. Finally, an examination of the literature field data proposed that the described loading effect could account for much of the variation in REE patterns observed in natural organic-rich waters (DOC > 5 mg L -1 and 4

  15. Nonthermal ions and associated magnetic field behavior at a quasi-parallel earth's bow shock

    Science.gov (United States)

    Wilkinson, W. P.; Pardaens, A. K.; Schwartz, S. J.; Burgess, D.; Luehr, H.; Kessel, R. L.; Dunlop, M.; Farrugia, C. J.

    1993-01-01

    Attention is given to ion and magnetic field measurements at the earth's bow shock from the AMPTE-UKS and -IRM spacecraft, which were examined in high time resolution during a 45-min interval when the field remained closely aligned with the model bow shock normal. Dense ion beams were detected almost exclusively in the midst of short-duration periods of turbulent magnetic field wave activity. Many examples of propagation at large elevation angles relative to the ecliptic plane, which is inconsistent with reflection in the standard model shock configuration, were discovered. The associated waves are elliptically polarized and are preferentially left-handed in the observer's frame of reference, but are less confined to the maximum variance plane than other previously studied foreshock waves. The association of the wave activity with the ion beams suggests that the former may be triggered by an ion-driven instability, and possible candidates are discussed.

  16. Clusters distributions on charges and dimensions at ion metal sputtering

    CERN Document Server

    Matveev, V I

    2001-01-01

    The theory on the metal sputtering in form of large (with the atoms number N >= 5) neutral and charged clusters under the impact of the ion bombardment is considered. The probability of the cluster emission, consisting of the N atoms, is calculated on the basis of the Einstein model. The charge state of the cluster, consisting of the N atoms, is determined. The obtained formulae agree well with the experimental results. It is noted, that the mass-spectra of the neutral clusters slightly depend on the target temperature, whereas the mass-spectra of the single charge clusters essentially depend on the target temperature

  17. Metal ion interaction of an oligopeptide fragment representing the regulatory metal binding site of a CueR protein

    DEFF Research Database (Denmark)

    Jancsó, Attila; Szokolai, Hajnalka; Roszahegyi, Livia;

    2013-01-01

    Metalloregulatory proteins of the MerR family are transcriptional activators that sense/control the concentration of various metal ions inside bacteria.1 The Cu+ efflux regulator CueR, similarly to other MerR proteins, possesses a short multiple Cys-containing metal binding loop close to the C......-terminus. CueR has a high selectivity for Cu+, Ag+ and Au+, but exhibits no transcriptional activity for the divalent ions Hg2+ and Zn2+.2 The two Cys- residues of the metal binding loop were shown to settle M+ ions into a linear coordination environment but other factors may also play a role in the recognition...... of cognate metal ions.2 Nevertheless, it is an interesting question whether the same sequence, when removed from the protein, shows a flexibility to adopt different coordination environments and may efficiently bind metal ions having preferences for larger coordination numbers....

  18. Novel forward osmosis process to effectively remove heavy metal ions

    KAUST Repository

    Cui, Yue

    2014-10-01

    In this study, a novel forward osmosis (FO) process for the removal of heavy metal ions from wastewater was demonstrated for the first time. The proposed FO process consists of a thin-film composite (TFC) FO membrane made from interfacial polymerization on a macrovoid-free polyimide support and a novel bulky hydroacid complex Na4[Co(C6H4O7)2]·r2H2O (Na-Co-CA) as the draw solute to minimize the reverse solute flux. The removal of six heavy metal solutions, i.e., Na2Cr2O7, Na2HAsO4, Pb(NO3)2, CdCl2, CuSO4, Hg(NO3)2, were successfully demonstrated. Water fluxes around 11L/m2/h (LMH) were harvested with heavy metals rejections of more than 99.5% when employing 1M Na-Co-CA as the draw solution to process 2000ppm(1 ppm=1 mg/L) heavy metal solutions at room temperature. This FO performance outperforms most nanofiltration (NF) processes. In addition, the high rejections were maintained at 99.5% when a more concentrated draw solution (1.5M) or feed solution (5000ppm) was utilized. Furthermore, rejections greater than 99.7% were still achieved with an enhanced water flux of 16.5LMH by operating the FO process at 60°C. The impressive heavy metal rejections and satisfactory water flux under various conditions suggest great potential of the newly developed FO system for the treatment of heavy metal wastewater. © 2014 Elsevier B.V.

  19. Acetabular bone density and metal ions after metal-on-metal versus metal-on-polyethylene total hip arthroplasty; short-term results

    NARCIS (Netherlands)

    Zijlstra, Wierd P.; van der Veen, Hugo C.; van den Akker-Scheek, Inge; Zee, Mark J. M.; Bulstra, Sjoerd K.; van Raay, Jos J. A. M.

    2014-01-01

    Information on periprosthetic acetabular bone density is lacking for metal-on-metal total hip arthroplasties. These bearings use cobalt-chromium instead of titanium acetabular components, which could lead to stress shielding and hence periprosthetic bone loss. Cobalt and chromium ions have detriment

  20. Ions from Different Sources in the near-Earth High-Latitude Magnetotail

    Science.gov (United States)

    Koleva, R.; Semkova, J.; Fedorov, A.; Smirnov, V.

    2003-04-01

    We investigate the characteristics of the ion population in the near-Earth (distances from 5 Re to 10 Re) magnetotail region poleward of the exterior cusp and the auroral field lines. The study presented is based on data from the Low Energy Plasma Composition Experiment (AMEI-2) aboard the high-apogee INTERBALL-1 satellite. Characteristic features of the region are the low plasma density and the low electron energy. We discuss several cases of ion spectral and composition measurements, using He++ as a tracer of SW plasma and O+ as a tracer of ionospheric plasma. Ion fluxes exhibit complex structure bearing the history of ions origin and consecutive acceleration. Both Solar wind and ionospheric ions are present in this region. O+ beams are regularly observed, as expected, going away or towards the Earth, with energies up to about 2 keV/q. A small amount of isotropic, high-temperature plasma sheet ions is always present. But dominating is a He++ population with energies in the interval 1 - 2.5 keV/q, either isotropic in pitch angle or consisting of counter-flowing ions with wide pitch-angular distribution. We discuss the possible relation of these populations with the ion populations observed downtail in the lobes, the PSBL, the 'mixed region' at the dusk flunk as identified by Fuselier et al. on base of ISEE-1 and ISEE-2 (J. Geophys. Res., 1999) and the lobe-plasma transition layer, defined by WIND data by Wilbert et al, (J. Geophys. Res., 2001).

  1. Effect of metal ions on some pharmacologically relevant interactions involving fluoroquinolone antibiotics.

    Science.gov (United States)

    Seedher, Neelam; Agarwal, Pooja

    2010-01-01

    Complexation of five metal cations, Fe(3+), Al(3+), Zn(2+), Cu(2+) and Mg(2+) with four fluoroquinolones, levofloxacin, sparfloxacin, ciprofloxacin hydrochloride and enrofloxacin and human serum albumin (HSA) has been studied for better understanding of bioavailability of drugs interacting with metals and proteins. The binding parameters have been determined using fluorescence and ultraviolet absorption spectroscopic techniques. The effect of metal cations on the interaction of fluoroquinolones with HSA has also been investigated. The association constants were of the order of 10(2)-10(4) for the fluoroquinolone-metal ion interaction. For a given drug, the chelation potential of Al(3+) was highest, whereas that of Mg(2+) was lowest. At a metal ion/drug ratio of 1:1, approximately 50%-73% of metal ion was bound per mole drug in most cases. In the case of HSA-metal ion interaction, for Fe(3+) and Zn(2+) ions, there was only one class of binding site, whereas for Al(3+) and Cu(2+) ions, two types of binding sites were found. The relative affinity of various metal ions was found to vary as Al(3+)>Cu(2+)>Zn(2+)>Fe(3+). The extent of binding was found to be independent of the charge on the ion. Owing to very weak quenching of fluorescence, the association constant for the interaction of Mg(2+) ion could not be determined by this technique. The binding affinity of all the fluoroquinolones to HSA was found to increase in the presence of Cu(2+) ions, whereas all other metal ions decreased the binding -affinity with the exception of levofloxacin in the presence of Zn(2+) and Al(3+) ions. Increase in the binding affinity indicated that the metal ions facilitate HSA-fluoroquinolone interaction and fluoroquinolones probably interact with HSA via a metal ion bridge. Decrease in the binding affinity, by contrast, can either be due to the fact that fluoroquinolone-metal ion complex inhibits fluoroquinolone-HSA interaction or metal ions produce conformational changes in the HSA

  2. POLAR spacecraft observations of helium ion angular anisotropy in the Earth's radiation belts

    Directory of Open Access Journals (Sweden)

    W. N. Spjeldvik

    Full Text Available New observations of energetic helium ion fluxes in the Earth's radiation belts have been obtained with the CAMMICE/HIT instrument on the ISTP/GGS POLAR spacecraft during the extended geomagnetically low activity period April through October 1996. POLAR executes a high inclination trajectory that crosses over both polar cap regions and passes over the geomagnetic equator in the heart of the radiation belts. The latter attribute makes possible direct observations of nearly the full equatorial helium ion pitch angle distributions in the heart of the Earth's radiation belt region. Additionally, the spacecraft often re-encounters the same geomagnetic flux tube at a substantially off-equatorial location within a few tens of minutes prior to or after the equatorial crossing. This makes both the equatorial pitch angle distribution and an expanded view of the local off-equatorial pitch angle distribution observable. The orbit of POLAR also permitted observations to be made in conjugate magnetic local time sectors over the course of the same day, and this afforded direct comparison of observations on diametrically opposite locations in the Earth's radiation belt region at closely spaced times. Results from four helium ion data channels covering ion kinetic energies from 520 to 8200 KeV show that the distributions display trapped particle characteristics with angular flux peaks for equatorially mirroring particles as one might reasonably expect. However, the helium ion pitch angle distributions generally flattened out for equatorial pitch angles below about 45°. Significant and systematic helium ion anisotropy difference at conjugate magnetic local time were also observed, and we report quiet time azimuthal variations of the anisotropy index.

    Key words. Magnetospheric physics (energetic particles · trapped; magnetospheric configuration and dynamics; plasmasphere

  3. METALLIC PHASE AND INSULATING CHARACTER OF ALKALI-EARTH METAL DOPED C60

    Institute of Scientific and Technical Information of China (English)

    曹阳; 陈良进; 陈波; 冯建文; 陈文建

    1995-01-01

    The three dimensional EHMO crystal orbital calculations for crystalline Ba6 C60,Ca3 C60 and Ca5 C60 are reported.The ground state of partially doped Ca3 C60 is found to be insulating with an indrect energy gap of 0.5eV.In contrast,the Ca5 C60 forms a metallic conducting phase with a set of three half-filled bands crossing the Fermi level which is Found to locate close to a peak of the density of state. The character of crystal orbitals near the Fermilevel for both Ca3 C60 and Ca5 C60 is completely carbon-like.In both cases the Ca3 atoms are almost fully ionized and C60 molecules form a stable negative charge state with six to ten additional electrons.The conductivity of Ba6 C60 is resuted from the incomplete charge tranfer.The valance charge of every Ba ion is about 0.33.The total charge tranfer of six Ba atoms is almost the same as that of five Ca atoms.

  4. Structure of Some 4f Rare Earth Liquid Metals - A Charged Hard Sphere Approach

    Institute of Scientific and Technical Information of China (English)

    P.B. Thakor; P.N. Gajjar; A.R. Jani

    2006-01-01

    A well-established pseodopotential is used to study the structure of some 4f rare earth liquid metals (Ce,Pr, Eu, Gd, Tb, and Yb). The structure factor S(q), pair distribution function g(r), interatomic distance r1, and coordination number n1 are calculated using Charged Hard Sphere (CHS) reference system. To introduce the exchange and correlation effects, the local field correction due to Sarkar et al. (S) is applied. The present investigation is successful in generating the structural information of Ce, Pr, Eu, Gd, Tb, and Yb 4f rare earth liquid metals.

  5. A simple model for /f-->d transitions of rare-earth ions in crystals

    Science.gov (United States)

    Duan, C. K.; Reid, M. F.

    2003-02-01

    Theoretical simulation and interpretation of f→ d transitions of rare earth ions in crystals are more difficult than for f→ f transitions, because f→ d transitions involve many more energy levels and are further complicated by strong vibronic transitions, so the experimental spectra contain many fewer resolvable peaks. In order to better understand the structure of the spectra, a simple model is developed to take into account the main interactions in the fN-1 d configuration. This model leads to quantum numbers characterizing the states and the associated transition selection rules. Relative transition intensities can be quantitatively estimated. The model is applied to Eu 2+ and Sm 3+ ions in crystals.

  6. Dispersive coupling between light and a rare-earth-ion-doped mechanical resonator

    Science.gov (United States)

    Mølmer, Klaus; Le Coq, Yann; Seidelin, Signe

    2016-11-01

    By spectrally hole burning an inhomogeneously broadened ensemble of ions while applying a controlled perturbation, one can obtain spectral holes that are functionalized for maximum sensitivity to different perturbations. We propose to use such hole-burned structures for the dispersive optical interaction with rare-earth-ion dopants whose frequencies are sensitive to crystal strain due to the bending motion of a crystal cantilever. A quantitative analysis shows that good optical sensitivity to the bending motion is obtained if a magnetic-field gradient is applied across the crystal during hole burning and that the resulting optomechanical coupling strength is sufficient for observing quantum features such as zero-point vibrations.

  7. Laser spectroscopy of rare earth ions in lead borate glasses and transparent glass-ceramics

    Science.gov (United States)

    Pisarski, W. A.; Grobelny, Ł.; Pisarska, J.; Lisiecki, R.; Dominiak-Dzik, G.; Ryba-Romanowski, W.

    2010-03-01

    Rare earth doped lead borate glasses and transparent glass-ceramics have been studied using optical spectroscopy. Based on the absorption, emission and its decay and the Judd-Ofelt calculations, several radiative and laser parameters for Ln 3+ ( Ln = Pr, Nd, Eu, Dy, Er, Tm) were evaluated. The large values of luminescence lifetime, quantum efficiency of excited state and room temperature peak stimulated emission cross-section suggest efficient laser transitions of Ln 3+ ions in lead borate glasses. The obtained results indicate that lead borate glasses and glass-ceramics containing Ln 3+ ions are promising host matrices for solid-state laser applications.

  8. Excited state absorption in glasses activated with rare earth ions: Experiment and modeling

    Science.gov (United States)

    Piatkowski, Dawid; Mackowski, Sebastian

    2012-10-01

    We present semiempirical approach based on the Judd-Ofelt theory and apply it for modeling the spectral properties of fluoride glasses activated with the rare earth (RE) ions. This method provide a powerful tool for simulating both ground state absorption (GSA) and excited state absorption (ESA) spectra of RE ions, e.g. Nd3+, Ho3+, Er3+ and Tm3+ in the ZBLAN glass matrix. The results of theoretical calculations correspond to the experimentally measured data. We also demonstrate that the spectra obtained using the presented approach are applicable in the analysis of up-conversion excitation schemes in these optoelectronically relevant materials.

  9. Amperometric detection of heavy metal ions in ion pair chromatography at an array of water/nitrobenzene micro interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Wilke, S. [Martin-Luther-Univ. Halle-Wittenberg, Merseburg (Germany). Fachbereich Chemie; Wang, H. [Martin-Luther-Univ. Halle-Wittenberg, Merseburg (Germany). Fachbereich Chemie; Muraczewska, M. [Martin-Luther-Univ. Halle-Wittenberg, Merseburg (Germany). Fachbereich Chemie; Mueller, H. [Martin-Luther-Univ. Halle-Wittenberg, Merseburg (Germany). Fachbereich Chemie

    1996-10-01

    A novel amperometric detector for heavy metal ions has been developed and successfully applied for ion pair chromatography. The detector is based on the electrochemical transfer of the metal ions across an array of water/nitrobenzene micro interfaces. The ion transfer is facilitated by the neutral ionophores methylenebis(diphenylphosphineoxide) and methylenebis(di- phenylphosphinesulfide). More than eight metals are separated in less than 15 min on an RP18 column using octyl sulfonate as ion pair reagent. For the heavy metals, the limits of decision are 19(Pb{sup 2+}), 9(Zn{sup 2+}), 9l (Co{sup 2+}), 8(Cd{sup 2+}) and 1.6(Mn{sup 2+}) {mu}g/L. The applicability of the new method for water samples is demonstrated. (orig.). With 3 figs., 2 tabs.

  10. Interactions of microorganisms with rare earth ions and their utilization for separation and environmental technology.

    Science.gov (United States)

    Moriwaki, Hiroshi; Yamamoto, Hiroki

    2013-01-01

    In recent years, rare earth elements (REEs) have been widely used in various modern technological devices and the global demand for REE has been increasing. The increased demand for REEs has led to environmental exposure or water pollution from rare earth metal mines and various commercial products. Therefore, the development of a safe technology for the separation and adsorption of REEs is very important from the perspective of green chemistry and environmental pollution. In this review, the application and mechanisms of microorganisms for the removal and extraction of REEs from aqueous solutions are described. In addition, the advantages in using microorganisms for REE adsorption and future studies on this topic are discussed.

  11. Inference on the Nature and the Mass of Earth's Late Veneer from Noble Metals and Gases

    CERN Document Server

    Dauphas, N

    2001-01-01

    Noble metals and gases are very sensitive to the late accretion to the Earth of asteroids and comets. We present mass balance arguments based on these elements that indicate that 0.7E22-2.7E22 kg of extraterrestrial bodies struck the Earth after core formation and that comets comprised less than 1E-5 by mass of the impacting population. These results imply that the dynamics of asteroids and comets changed drastically with time and that biogenic elements and prebiotic molecules were not delivered to the Earth by comets but rather by carbonaceous asteroids.

  12. Solid Phase Luminescence of Several Rare Earth Ions on Ion-Exchange Films

    Science.gov (United States)

    Tanner, Stephen P.; Street, Kenneth W., Jr.

    1999-01-01

    The development and characterization of a novel ion-exchange film for solid-phase fluorometry and phosphorimetry is reported. This new cation-exchange material is suitable for spectroscopic applications in the ultraviolet and visible regions. It is advantageous because it, as a single entity, is easily recovered from solution and mounted in the spectrofluorometers. After preconcentration on the film, the luminescence intensity of lanthanide ions is several orders of magnitude greater than that of the corresponding solution, depending on the volume of solution and the amount of film. This procedure allows emission spectral measurements and determination of lanthanide ions at solution concentrations of < 5 (micro)g/L. The film may be stored for subsequent reuse or as a permanent record of the analysis. The major drawback to the use of the film is slow uptake of analyte due to diffusion limitations.

  13. Most spin-1/2 transition-metal ions do have single ion anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jia; Whangbo, Myung-Hwan, E-mail: hxiang@fudan.edu.cn, E-mail: mike-whangbo@ncsu.edu [Department of Chemistry, North Carolina State University, Raleigh, North Carolina 27695 (United States); Koo, Hyun-Joo [Department of Chemistry and Research Institute for Basic Sciences, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Xiang, Hongjun, E-mail: hxiang@fudan.edu.cn, E-mail: mike-whangbo@ncsu.edu [Key Laboratory of Computational Physical Sciences (Ministry of Education), State Key Laboratory of Surface Physics, and Department of Physics, Fudan University, Shanghai 200433 (China); Kremer, Reinhard K. [Max-Planck-Institut für Festkörperforschung, Heisenbergstrasse 1, D-70569 Stuttgart (Germany)

    2014-09-28

    The cause for the preferred spin orientation in magnetic systems containing spin-1/2 transition-metal ions was explored by studying the origin of the easy-plane anisotropy of the spin-1/2 Cu{sup 2+} ions in CuCl{sub 2}·2H{sub 2}O, LiCuVO{sub 4}, CuCl{sub 2}, and CuBr{sub 2} on the basis of density functional theory and magnetic dipole-dipole energy calculations as well as a perturbation theory treatment of the spin-orbit coupling. We find that the spin orientation observed for these spin-1/2 ions is not caused by their anisotropic spin exchange interactions, nor by their magnetic dipole-dipole interactions, but by the spin-orbit coupling associated with their crystal-field split d-states. Our study also predicts in-plane anisotropy for the Cu{sup 2+} ions of Bi{sub 2}CuO{sub 4} and Li{sub 2}CuO{sub 2}. The results of our investigations dispel the mistaken belief that magnetic systems with spin-1/2 ions have no magnetic anisotropy induced by spin-orbit coupling.

  14. Metal ion binding with dehydroannulenes - Plausible two-dimensional molecular sieves

    Indian Academy of Sciences (India)

    B Sateesh; Y Soujanya; G Narahari Sastry

    2007-09-01

    Theoretical investigations have been carried out at B3LYP/6-311++G∗∗ level of theory to study the binding interaction of various metal ions, Li+, Na+ and K+ with dehydroannulene systems. The present study reveals that alkali metal ions bind strongly to dehydroannulenes and the passage through the central cavity is controlled by the size of metal ion and dimension of dehydroannulene cavity.

  15. Triboelectrification-Enabled Self-Powered Detection and Removal of Heavy Metal Ions in Wastewater.

    Science.gov (United States)

    Li, Zhaoling; Chen, Jun; Guo, Hengyu; Fan, Xing; Wen, Zhen; Yeh, Min-Hsin; Yu, Chongwen; Cao, Xia; Wang, Zhong Lin

    2016-04-20

    A fundamentally new working principle into the field of self-powered heavy-metal-ion detection and removal using the triboelectrification effect is introduced. The as-developed tribo-nanosensors can selectively detect common heavy metal ions. The water-driven triboelectric nanogenerator is taken as a sustainable power source for heavy-metal-ion removal by recycling the kinetic energy from flowing wastewater.

  16. Liquid-liquid extraction of metal ions by the 6-membered N-containing macrocycle hexacyclen.

    Science.gov (United States)

    Arpadjan, S; Mitewa, M; Bontchev, P R

    1987-11-01

    The nitrogen-containing analogue of 18-crown-6, 1,4,7,10,13,16-hexa-azaoctadecane (hexacyclen)] was studied as a reagent for complexation and extraction of some metal ions. It was found that with this reagent and methyl isobutyl ketone, metal ions such as silver(I), mercury(II), copper(II), platinum(II) and palladium(II) can be quantitatively extracted and separated from iron(III) and some other metal ions.

  17. Extended defects in Si wafers implanted with ions of rare-earth elements

    Energy Technology Data Exchange (ETDEWEB)

    Vdovin, V.I. E-mail: icpm@mail.girmet.ru; Yugova, T.G.; Sobolev, N.A.; Shek, E.I.; Makovijchuk, M.I.; Parshin, E.O

    1999-01-01

    Structural defects arising in Cz-Si wafers after implantation with high-energy ions of rare-earth elements (Er, Ho, Dy) and annealing in a chlorine-containing ambience were studied by transmission electron microscopy and chemical etching/Nomarski microscopy. Regularities of extended defect formation in dependence on implant and annealing conditions as well as evolution of structural defect patterns during thermal annealing have been established.

  18. NIR persistent luminescence of lanthanide ion-doped rare-earth oxycarbonates: the effect of dopants.

    Science.gov (United States)

    Caratto, Valentina; Locardi, Federico; Costa, Giorgio Andrea; Masini, Roberto; Fasoli, Mauro; Panzeri, Laura; Martini, Marco; Bottinelli, Emanuela; Gianotti, Enrica; Miletto, Ivana

    2014-10-22

    A series of luminescent rare-earth ion-doped hexagonal II-type Gd oxycarbonate phosphors Gd2-xRExO2CO3 (RE = Eu(3+), Yb(3+), Dy(3+)) have been successfully synthesized by thermal decomposition of the corresponding mixed oxalates. The Yb(3+) doped Gd-oxycarbonate has evidenced a high persistent luminescence in the NIR region, that is independent from the temperature and makes this materials particular attractive as optical probes for bioimaging.

  19. New technology of extracting the amount of rare earth metals from the red mud

    Science.gov (United States)

    Martoyan, G. A.; Karamyan, G. G.; Vardan, G. A.

    2016-01-01

    The paper outlined the environmental and economic problems associated with red mud - the waste generated in processing of bauxite ore for aluminum production. The chemical analysis of red mud has identified a number of useful elements including rare earth metals. The electromembrane technology of red mud processing with extraction of valuable elements is described. A possible scheme of separation of these metals through electrolysis is also given.

  20. Hyporheic Microbial Biofilms as Indicators of Heavy and Rare Earth Metals in the Clark Fork Basin, Montana

    Science.gov (United States)

    Barnhart, E. P.; Hornberger, M.; Hwang, C.; Dror, I.; Bouskill, N.; Short, T.; Cain, D.; Fields, M. W.

    2016-12-01

    The ability to effectively monitor the impact of hard rock mining activities on rivers and streams is a growing concern given the large number of active and abandoned mines in the western United States. One such example, the Clark Fork Basin (CFB), western Montana, was extensively mined for copper in the early 20th century: it is now one of largest U.S. EPA superfund sites. Microbial biofilms are at the base of the lotic food chain and may provide a useful biomonitoring tool for the assessment of metal toxicity due to their environmental ubiquity, rapidity of response to environmental perturbation, and importance in determining metal mobility. Hyporheic microbial biofilms from the CFB were sampled in 2014, concurrent with the USGS National Research Programs (NRP) long-term site monitoring of metals in bed sediment and aquatic benthic insects. Integration of the DNA sequencing results from the hyporheic biofilms with the sediment and insect metal concentrations correlated several bacterial phyla with metal contamination. For example, the genus Lysobacter was strongly associated with copper (Cu) bioaccumulation in the aquatic insect Hydropsyche. These results support previous studies identifying Lysobacter as a bacterial genus that is resistant to Cu ions. Our analysis is the first to indicate that specific microorganisms can act as biomarkers of Cu contamination in rivers. Moreover, our work demonstrates that changes at the microbial community level in the hyporheic zone can be coupled to observed perturbations across higher trophic levels. In 2015, extensive remediation occurred at several of the sites sampled in 2014, providing an excellent opportunity to revisit the sites and examine the temporal variability of identified biomarkers and the short-term effectiveness of remediation. In addition, samples were analyzed for rare earth metals, of which little is known, and could provide additional insight into other metals that change the microbial community structure.

  1. Electrospray droplet exposure to organic vapors: metal ion removal from proteins and protein complexes.

    Science.gov (United States)

    DeMuth, J Corinne; McLuckey, Scott A

    2015-01-20

    The exposure of aqueous nanoelectrospray droplets to various organic vapors can dramatically reduce sodium adduction on protein ions in positive ion mass spectra. Volatile alcohols, such as methanol, ethanol, and isopropanol lead to a significant reduction in sodium ion adduction but are not as effective as acetonitrile, acetone, and ethyl acetate. Organic vapor exposure in the negative ion mode, on the other hand, has essentially no effect on alkali ion adduction. Evidence is presented to suggest that the mechanism by which organic vapor exposure reduces alkali ion adduction in the positive mode involves the depletion of alkali metal ions via ion evaporation of metal ions solvated with organic molecules. The early generation of metal/organic cluster ions during the droplet desolvation process results in fewer metal ions available to condense on the protein ions formed via the charged residue mechanism. These effects are demonstrated with holomyoglobin ions to illustrate that the metal ion reduction takes place without detectable protein denaturation, which might be revealed by heme loss or an increase in charge state distribution. No evidence is observed for denaturation with exposure to any of the organic vapors evaluated in this work.

  2. Metal ion sorption by untreated and chemically treated biomass

    Energy Technology Data Exchange (ETDEWEB)

    Kilbane, J.J.; Xie, J.

    1992-12-31

    The metal-binding ability of biosorbents is well known; however, in comparison with commercial ion-exchange resins the capacity of biosorbents is low. The purpose of this research was to examine chemically modified biosorbents and biosorbents prepared from microorganisms isolated from extreme environments to determine if significant improvements in metal-binding capacity or biosorbents with unique capabilities could be produced. Chemical treatments examined included acid, alkali, carbon disulfide, phosphorus oxychloride, anhydrous formamide, sodium thiosulfate, sodium chloroacetic acid, and phenylsulfonate. Biosorbents were prepared from microorganisms isolated from pristine and acid mine drainage impacted sites and included heterotrophs, methanotrophs, algae, and sulfate reducers. Chemical modification with carbon disulfide, phosphorous oxychloride, and sodium thiosulfate yielded biosorbents with such as much as 74%, 133%, and 155% improvements, respectively, in metal-binding capacity, but the performance of these chemically modified biosorbents deteriorated upon repeated use. A culture isolated from an acid mine drainage impacted site, IGTM17, exhibits about 3-fold higher metal-binding capacity in comparison with other biosorbents examined in this study. IGTM17 also exhibits superior metal-binding ability at decreased pH or in the presence of interfering common cations in comparison with other biosorbents or some commercially available cation exchange resins. Some biosorbents, such as IGTM5, can bind anions. To our knowledge this is the first demonstration of the ability of biosorbents to bind anions. Moreover, preliminary data indicate that the chemical modification of biosorbents may be capable of imparting the ability to selectively bind certain anions. Further research is needed to optimize conditions for the chemical modification and stabilization of biosorbents.

  3. Polaronic Transport in Phosphate Glasses Containing Transition Metal Ions

    Science.gov (United States)

    Henderson, Mark

    The goal of this dissertation is to characterize the basic transport properties of phosphate glasses containing various amounts of TIs and to identify and explain any electronic phase transitions which may occur. The P2 O5-V2O5-WO3 (PVW) glass system will be analyzed to find the effect of TI concentration on conduction. In addition, the effect of the relative concentrations of network forming ions (SiO2 and P2O5) on transport will be studied in the P2O5-SiO2-Fe2O 3 (PSF) system. Also presented is a numerical study on a tight-binding model adapted for the purposes of modelling Gaussian traps, mimicking TI's, which are arranged in an extended network. The results of this project will contribute to the development of fundamental theories on the electronic transport in glasses containing mixtures of transition oxides as well as those containing multiple network formers without discernible phase separation. The present study on the PVW follows up on previous investigation into the effect on mixed transition ions in oxide glasses. Past research has focused on glasses containing transition metal ions from the 3d row. The inclusion of tungsten, a 5d transition metal, adds a layer of complexity through the mismatch of the energies of the orbitals contributing to localized states. The data have indicated that a transition reminiscent of a metal-insulator transition (MIT) occurs in this system as the concentration of tungsten increases. As opposed to some other MIT-like transitions found in phosphate glass systems, there seems to be no polaron to bipolaron conversion. Instead, the individual localization parameter for tungsten noticeably decreases dramatically at the transition point as well as the adiabaticity. Another distinctive feature of this project is the study of the PSF system, which contains two true network formers, phosphorous pentoxide (P2O 5) and silicon dioxide (SiO2). It is not usually possible to do a reliable investigation of the conduction properties of

  4. Creation of trapped electrons and holes in alkaline-earth fluoride crystals doped by rare-earth ions

    Science.gov (United States)

    Radzhabov, E.

    2002-06-01

    Defects in Ce 3+- and Eu 2+-doped alkaline-earth fluorides, created by vacuum ultraviolet (VUV) photons with energy lower than that of the band gap, were investigated by various methods: thermostimulated luminescence, photostimulated luminescence and optical absorption. The CaF 2:Eu 2+ thermoluminescence curves in the range of 60-330 K due to various types of trapped holes were the same after VUV illumination as after X-ray irradiation. Thermoluminescence curves of Ce 3+-doped alkaline-earth fluorides created by VUV illumination or X-ray irradiation were generally similar. However, Vk thermoluminescence peaks were absent in VUV-illuminated CaF 2:Ce 3+ and SrF 2:Ce 3+ crystals. Creation of Ce 2+ characteristic bands was observed in photostimulated luminescence spectra as well as in optical absorption spectra of vacuum ultraviolet-illuminated or X-ray-irradiated Ce 3+-doped crystals. The proposed mechanism of creation of trapped hole and trapped electron defects by vacuum ultraviolet illumination involves charge transfer-type transitions, in which the electron transfers from valence band to an impurity level, lying in the band gap. Comparison of all involved energies of transitions in the crystals investigated shows that the sum of all transition energies is less than that of the band gap by 1-3 eV. This energy difference can be considered as the energy of lattice relaxation around created Ce 2+ or Eu + ions.

  5. Photoluminescence of some chalcogenide glasses doped with rare-earth ions

    Science.gov (United States)

    Iovu, Mihail; Lupan, Elana; Zavadil, Jurii; Kostka, Peter; Ivanova, Zoya; Seddon, Angela; Furniss, David

    2015-02-01

    The absorption and emission spectra of Ga-La-S:O doped with Pr3+, and Ga-Ge-As-S chalcogenide glasses doped with Pr3+, Dy3+, Nd3+, Sm3+ and Ho3+ were experimentally investigated at room temperature and at T=4 K. Photoluminescence spectra were measured at low temperature (T=4 K) at excitation by He-Ne (λ=632.8 nm line) and Ar ion (INNOVA 306, λ=514.5 nm line) lasers working in CW regime, in order to observe simultaneously the narrow 4f-4f emission from rare-earth ions and the broad band luminescence of the host glass. In the transmission spectra of rare-earth doped glasses differs from that of the base glass. The major feature in low-temperature of photoluminescence spectra (PL) is the presence of the broad band luminescence of the host glass and relatively sharp 4f-4f radiative transitions due to the presence of rare-earth (RE3+) ions, that gives the direct evidence of the energy transfer between the host glass and respective RE3+ dopants.

  6. Properties of Hydrated Alkali Metals Aimed at the Ion Channel Selectivity

    Institute of Scientific and Technical Information of China (English)

    AN Hai-Long; LIU Yu-Zhi; ZHANG Su-Hua; ZHAN Yong; ZHANG Hai-Lin

    2008-01-01

    The hydration structure properties of different alkali metal ions with eight water molecules and potassium ions with different numbers of water molecules are studied using the mixed density functional theory, B3LYP, with 6-311G basis set. The hydration structures are obtained from structure optimization and the optimum numbers of water molecules in the innermost hydration shell for the alkali metal ions are found. Some useful information about the ion channel selectivity is presented.

  7. Nanoparticles reduce nickel allergy by capturing metal ions

    Science.gov (United States)

    Vemula, Praveen Kumar; Anderson, R. Rox; Karp, Jeffrey M.

    2011-05-01

    Approximately 10% of the population in the USA suffer from nickel allergy, and many are unable to wear jewellery or handle coins and other objects that contain nickel. Many agents have been developed to reduce the penetration of nickel through skin, but few formulations are safe and effective. Here, we show that applying a thin layer of glycerine emollient containing nanoparticles of either calcium carbonate or calcium phosphate on an isolated piece of pig skin (in vitro) and on the skin of mice (in vivo) prevents the penetration of nickel ions into the skin. The nanoparticles capture nickel ions by cation exchange, and remain on the surface of the skin, allowing them to be removed by simple washing with water. Approximately 11-fold fewer nanoparticles by mass are required to achieve the same efficacy as the chelating agent ethylenediamine tetraacetic acid. Using nanoparticles with diameters smaller than 500 nm in topical creams may be an effective way to limit the exposure to metal ions that can cause skin irritation.

  8. Mass distribution of cluster ions produced from laser ablation of metal-composite-oxides Y-M-Cu-O (M = Ba, Sr, Ca, Mg)

    Energy Technology Data Exchange (ETDEWEB)

    Liu Zhaoyang; Wang Chunru; Huang Rongbin; Zheng Lansun [Xiamen Univ. (China). Dept. of Chem.

    1995-09-01

    Laser ablation of YMCuO metal-composite-oxides (M = Ba, Sr, Ca, Mg) in high vacuum produced cluster ions with various sizes and compositions. Mass spectra of the cluster ions were recorded by a home-built time-of-flight (TOF) mass spectrometer and the mass distributions were analyzed by a statistical model. For YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO) high-Tc superconducting samples, six series of cluster ions were observed. Replacement of barium in the metal-composite-oxide sample with other alkaline earth metal, such as strontium, calcium, or magnesium, not only removed the superconductivity, but also changed the compositions and distributions of the laser generated cluster ions. For instance, copper was only found in the compositions of cluster ions generated from YBCO sample. From comparison of the experimental results, interactions among components of the metal-composite-oxides and the function of alkaline earth metal in superconducting material were discussed. (orig.) 19 refs.

  9. Adsorption of alkali, alkaline-earth, and 3d transition metal atoms on silicene

    Science.gov (United States)

    Sahin, H.; Peeters, F. M.

    2013-02-01

    The adsorption characteristics of alkali, alkaline-earth, and transition metal adatoms on silicene, a graphene-like monolayer structure of silicon are analyzed by means of first-principles calculations. In contrast to graphene, interaction between the metal atoms and the silicene surface is quite strong due to its highly reactive buckled hexagonal structure. In addition to structural properties, we also calculate the electronic band dispersion, net magnetic moment, charge transfer, work function, and dipole moment of the metal adsorbed silicene sheets. Alkali metals, Li, Na, and K, adsorb to hollow sites without any lattice distortion. As a consequence of the significant charge transfer from alkalis to silicene, metalization of silicene takes place. Trends directly related to atomic size, adsorption height, work function, and dipole moment of the silicene/alkali adatom system are also revealed. We found that the adsorption of alkaline-earth metals on silicene is entirely different from their adsorption on graphene. The adsorption of Be, Mg, and Ca turns silicene into a narrow gap semiconductor. Adsorption characteristics of eight transition metals Ti, V, Cr, Mn, Fe, Co, Mo, and W are also investigated. As a result of their partially occupied d orbital, transition metals show diverse structural, electronic, and magnetic properties. Upon the adsorption of transition metals, depending on the adatom type and atomic radius, the system can exhibit metal, half-metal, and semiconducting behavior. For all metal adsorbates, the direction of the charge transfer is from adsorbate to silicene, because of its high surface reactivity. Our results indicate that the reactive crystal structure of silicene provides a rich playground for functionalization at nanoscale.

  10. Prostate cancer outcome and tissue levels of metal ions

    Science.gov (United States)

    Sarafanov, A.G.; Todorov, T.I.; Centeno, J.A.; MacIas, V.; Gao, W.; Liang, W.-M.; Beam, C.; Gray, Michael A.; Kajdacsy-Balla, A.

    2011-01-01

    BACKGROUND There are several studies examining prostate cancer and exposure to cadmium, iron, selenium, and zinc. Less data are available on the possible influence of these metal ions on prostate cancer outcome. This study measured levels of these ions in prostatectomy samples in order to examine possible associations between metal concentrations and disease outcome. METHODS We obtained formalin fixed paraffin embedded tissue blocks of prostatectomy samples of 40 patients with PSA recurrence, matched 1:1 (for year of surgery, race, age, Gleason grading, and pathology TNM classification) with tissue blocks from 40 patients without recurrence (n = 80). Case-control pairs were compared for the levels of metals in areas adjacent to tumors. Inductively coupled plasma-mass spectrometry (ICP-MS) was used for quantification of Cd, Fe, Zn, and Se. RESULTS Patients with biochemical (PSA) recurrence of disease had 12% lower median iron (95 ??g/g vs. 111 ??g/g; P = 0.04) and 21% lower zinc (279 ??g/g vs. 346 ??g/g; P = 0.04) concentrations in the normal-appearing tissue immediately adjacent to cancer areas. Differences in cadmium (0.489 ??g/g vs. 0.439 ??g/g; 4% higher) and selenium (1.68 ??g/g vs. 1.58 ??g/g; 5% higher) levels were not statistically significant in recurrence cases, when compared to non-recurrences (P = 0.40 and 0.21, respectively). CONCLUSIONS There is an association between low zinc and low iron prostate tissue levels and biochemical recurrence in prostate cancer. Whether these novel findings are a cause or effect of more aggressive tumors, or whether low zinc and iron prostatic levels raise implications for therapy, remains to be investigated. Copyright ?? 2011 Wiley-Liss, Inc.

  11. Investigation of metal ion accumulation in Euglena gracilis by fluorescence methods

    Energy Technology Data Exchange (ETDEWEB)

    Shen, H. E-mail: haoshen@fudan.edu.cn; Ren, Q.G.; Mi, Y.; Shi, X.F.; Yao, H.Y.; Jin, C.Z.; Huang, Y.Y.; He, W.; Zhang, J.; Liu, B

    2002-04-01

    Single cell synchrotron X-ray fluorescence (SXRF) microprobe measurements as well as X-ray absorption near edge structure experiments have been done at Beijing Synchrotron Radiation Facility on Euglena Gracilis cells. Concentrations of the metal ions Mn{sup 2+}, Nd{sup 3+}, Ce{sup 3+} and other trace elements, such as Ca, Fe, Zn, etc. have been measured both by single cell SXRF and bulk PIXE technique. It was found that the content of Ca, Fe and Zn was lower after the uptake of rare earths or Mn by the cells, while the valence states of Mn{sup 2+}, Ce{sup 3+} and Nd{sup 3+} were unaltered. The results related to cytochemistry are also discussed.

  12. Ligational behavior of Schiff bases towards transition metal ion and metalation effect on their antibacterial activity.

    Science.gov (United States)

    Devi, Jai; Batra, Nisha; Malhotra, Rajesh

    2012-11-01

    New Schiff bases pyrazine-2-carboxylicacid (phenyl-pyridin-2-yl-methylene)-hydrazide (Hpch-bp) HL(1) and pyrazine-2-carboxylicacid (pyridin-2-ylmethylene)-hydrazide (Hpch-pc) HL(2) derived from condensation of pyrazine carboxylic hydrazide (Hpch) with 2-benzoyl pyridine (bp) or pyridine 2-carbaldehyde (pc) and their transition metal complexes of type ML((1-2)2) have been synthesized, where M=Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). Characterization of ligands and their metal complexes was carried out by elemental analysis, conductimetric studies, magnetic susceptibility, spectroscopic techniques (IR, UV-VIS, NMR, ESR, Mass) and thermogravimetric analysis. The physico-chemical studies revealed octahedral geometry or distorted octahedral geometry around metal ion. These azomethine Schiff base ligands acted as tridentate coordinating through carbonyl, azomethine and pyridine nitrogen present in the ligand. The thermodynamic and thermal properties of the complexes have been investigated and it was observed on the basis of these studies that thermal stability of complexes follows the order Mnantibacterial activity at different concentrations against bacteria viz. Gram positive Bacillus subtilis, Micrococcus luteus and Gram negative Pseudomonas aeruginosa, Pseudomonas mendocina. A marked enhancement in biocidal activity of the ligands under similar experimental conditions was observed as a consequence of coordination with metal ions. The trend of growth inhibition in the complexes was found to be in the order: Cu>Mn>Ni>Co>Zn.

  13. Ligational behavior of Schiff bases towards transition metal ion and metalation effect on their antibacterial activity

    Science.gov (United States)

    Devi, Jai; Batra, Nisha; Malhotra, Rajesh

    2012-11-01

    New Schiff bases pyrazine-2-carboxylicacid (phenyl-pyridin-2-yl-methylene)-hydrazide (Hpch-bp) HL1 and pyrazine-2-carboxylicacid (pyridin-2-ylmethylene)-hydrazide (Hpch-pc) HL2 derived from condensation of pyrazine carboxylic hydrazide (Hpch) with 2-benzoyl pyridine (bp) or pyridine 2-carbaldehyde (pc) and their transition metal complexes of type ML(1-2)2 have been synthesized, where M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). Characterization of ligands and their metal complexes was carried out by elemental analysis, conductimetric studies, magnetic susceptibility, spectroscopic techniques (IR, UV-VIS, NMR, ESR, Mass) and thermogravimetric analysis. The physico-chemical studies revealed octahedral geometry or distorted octahedral geometry around metal ion. These azomethine Schiff base ligands acted as tridentate ? coordinating through carbonyl, azomethine and pyridine nitrogen present in the ligand. The thermodynamic and thermal properties of the complexes have been investigated and it was observed on the basis of these studies that thermal stability of complexes follows the order Mn complexes were tested for in vitro antibacterial activity at different concentrations against bacteria viz. Gram positive Bacillus subtilis, Micrococcus luteus and Gram negative Pseudomonas aeruginosa, Pseudomonas mendocina. A marked enhancement in biocidal activity of the ligands under similar experimental conditions was observed as a consequence of coordination with metal ions. The trend of growth inhibition in the complexes was found to be in the order: Cu > Mn > Ni > Co > Zn.

  14. High-Field Magnetization of Light Rare-Earth Metals

    DEFF Research Database (Denmark)

    McEwen, K.A.; Cock, G.J.; Roeland, L.W.;

    1973-01-01

    The magnetization of single crystals of Eu, Sm, Nd, Pr, and Pr-Nd alloys has been measured in fields up to 37 T (370 kG). The results give new information on the magnetic properties of these metals. Of particular interest is a first-order transition from a nonmagnetic to a metamagnetic phase...... in double-hexagonal close-packed Pr, due to the crossing of crystal-field levels, when a field of about 32 T is applied in the hard direction at low temperatures....

  15. Towards metals analysis using corona discharge ionization ion mobility spectrometry.

    Science.gov (United States)

    Jafari, Mohammad T; Saraji, Mohammad; Sherafatmand, Hossein

    2016-02-25

    For the first time, the capability of corona discharge ionization ion mobility spectrometry (CD-IMS) in the determination of metal complex was evaluated. The extreme simplicity of dispersive liquid-liquid microextraction (DLLME) coupled to the high sensitivity of CD-IMS measurement could make this combination really useful for simple, rapid, and sensitive determination of metals in different samples. In this regard, mercury, as a model metal, was complexed with diethyldithiocarbamate (DEDTC), and then extracted into the carbon tetrachloride using DLLME. Some parameters affecting the extraction efficiency, including the type and volume of the extraction solvent, the type and volume of the disperser solvent, the concentration of the chelating agent, salt addition and, pH were exhaustively investigated. Under the optimized condition, the enrichment factor was obtained to be 142. The linear range of 0.035-10.0 μg mL(-1) with r(2) = 0.997 and the detection limit of 0.010 μg mL(-1) were obtained. The relative standard deviation values were calculated to be lower than 4% and 8% for intra-day and inter-day, respectively. Finally, the developed method was successfully applied for the extraction and determination of mercury in various real samples. The satisfactory results revealed the capability of the proposed method in trace analysis without tedious derivatization or hydride generation.

  16. Tracking environmental impacts in global product chains - Rare Earth Metals and other critical metals used in the cleantech industry

    Energy Technology Data Exchange (ETDEWEB)

    Pathan, A.; Schilli, A.; Johansson, J.; Vehvilaeinen, I.; Larsson, A.; Hutter, J.

    2013-03-15

    Metals form a central part of the global economy, but their extraction and supply are linked to several environmental and social concerns. This study aims to create a picture of the supply chain of Rare Earth Metals (REMs) and other critical metals used in the clean technology (cleantech) sectors of electric vehicles and solar panels. The study examines how Nordic cleantech companies are aware and acting on the challenges related to the lifecycle of these metals and what are the potentials to minimise environmental and social impacts. Recommendations of the study can be summarised as three initiatives: establishment of an awareness platform and roundtable initiative (short-term), research and information gathering (mid-term), and development of closed-loop solutions (long-term). (Author)

  17. Evidence for solar wind origin of energetic heavy ions in the earth's radiation belt

    Science.gov (United States)

    Hovestadt, D.; Klecker, B.; Scholer, M.; Gloeckler, G.; Ipavich, F. M.; Fan, C. Y.; Fisk, L. A.; Ogallagher, J. J.

    1978-01-01

    Analysis of data from our energetic ion composition experiment on ISEE-1 has revealed the presence of substantial fluxes of carbon, oxygen, and heavier ions above 400 keV/nucleon at L values between approximately 2.5 and 4 earth radii. The measured C/O ratio varies systematically from 1.3 at 450 keV/nucleon to 4.1 at 1.3 MeV/nucleon, and no iron is observed above 200 keV/nucleon. These results provide strong evidence for a solar wind origin for energetic ions in the outer radiation belt. The absence of iron and the increase of the carbon-to-oxygen ratio with energy suggest that the condition for the validity of the first adiabatic invariant may have a strong influence on the trapping of these particles.

  18. Quasi-linear analysis of ion Weibel instability in the earth's neutral sheet

    Science.gov (United States)

    Lui, Anthony T. Y.; Yoon, Peter H.; Chang, Chia-Lie

    1993-01-01

    A quasi-linear analysis of the ion Weibel instability (IWI) for waves with parallel propagation is carried out for parameters appropriate to the earth's neutral sheet during the substorm interval. For ion drift speed reaching sizable fraction of the ion thermal speed, unstable waves grow to a nonlinear regime in a time interval greater than an ion gyroperiod. The saturation level is attained with current density reduced to about 15-28 percent of its preactivity level. The unstable wave amplitude normalized to the initial ambient field is found to be in the range of 0.2-0.8. This is accompanied by ion heating along the magnetic field with the parallel temperature being enhanced by 25-90 percent. Thus, the IWI can provide nonadiabatic heating of ions in current disruptions during substorms. The associated anomalous resistivity is estimated to be about 1 x 10 exp -7 to 1 x 10 exp -6 s, which is about 11 to 12 orders of magnitude above the classical resistivity.

  19. Doping of graphite by an alkaline-earth metal to reduce the work function

    NARCIS (Netherlands)

    Baturin, AS; Nikolski, KN; Knyazev, AI; Tchesov, RG; Sheshin, EP

    2004-01-01

    A technique for reducing the work function of a field-emission graphite cathode by doping it by an alkaline-earth metal (barium) is suggested. A model of formation of a barium monolayer on the cathode surface is proposed. Field-emission tests show that the operating voltage of the doped cathode is l

  20. Calculated Structural Phase-Transitions in the Alkaline-Earth Metals

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt

    1982-01-01

    The local-density approximation and the linear muffin-tin orbital method have been used within the atomic-sphere approximation to calculate structural energy differences for all the alkaline earth metals at zero temperature. At ordinary pressure the calculations predict the crystal structure...

  1. Investigation of the Transport of Solar Ions Through the Earth's Magnetosphere

    Science.gov (United States)

    Lennartsson, O. W.; Evans, David (Technical Monitor)

    2000-01-01

    The objective of this study has been to infer, by statistical means, the most probable mode of entry of solar wind plasma into Earth's magnetotail, using a particular set of archived data from the Lockheed Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE-1) satellite, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) in the 1970's and 80's. Despite their considerable age, the Lockheed ISEE-1 data are still, at the time of this report, the only substantial ion composition data in the sub-keV to keV energy range available from the magnetotail beyond 9 R(sub E), because of various technical problems with ion mass spectrometers on later missions, and are therefore a unique source of information about the mixing of solar and terrestrial origin plasmas in the tail, within the ISEE-1 apogee of almost 23 R(sub E). The entire set of archived data used in this study, covering the 4.5 years of operation of the instrument and comprising not only tail measurements but also data from the inner magnetosphere as well as data from outside the magnetopause, is now available to the public via the WorldWideWeb at the address: http://cis.spasci.com/ISEE_ions The fundamental assumption of this and other studies of magnetosphere ion composition is that He++ and O+ ions are virtually certain "tags" of solar and terrestrial origins, respectively. This is an assumption with strong theoretical basis and it is corroborated by observational evidence, including the often substantial differences between the velocity distribution functions of those two species. The H+ ions can have a dual origin, in principle, but the close resemblance in the ISEE-1 data between the dynamics of H+ and He++ ions indicates a predominantly solar origin of the H+ ions in the tail, at least. By the same token, the usually minor He+ ions are probably almost entirely of terrestrial origin, because of their similarity to the O

  2. Investigation of the Transport of Solar Ions Through the Earth's Magnetosphere

    Science.gov (United States)

    Lennartsson, O. W.

    2000-08-01

    The objective of this study has been to infer, by statistical means, the most probable mode of entry of solar wind plasma into Earth's magnetotail, using a particular set of archived data from the Lockheed Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE-1) satellite, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) in the 1970's and 80's. Despite their considerable age, the Lockheed ISEE-1 data are still, at the time of this report, the only substantial ion composition data in the sub-keV to keV energy range available from the magnetotail beyond 9 RE, because of various technical problems with ion mass spectrometers on later missions, and are therefore a unique source of information about the mixing of solar and terrestrial origin plasmas in the tail, within the ISEE-1 apogee of almost 23 RE. The entire set of archived data used in this study, covering the 4.5 years of operation of the instrument and comprising not only tail measurements but also data from the inner magnetosphere as well as data from outside the magnetopause, is now available to the public via the WorldWideWeb at the address: http://cis.spasci.com/ISEE_ions The fundamental assumption of this and other studies of magnetosphere ion composition is that He++ and O+ ions are virtually certain "tags" of solar and terrestrial origins, respectively. This is an assumption with strong theoretical basis and it is corroborated by observational evidence, including the often substantial differences between the velocity distribution functions of those two species. The H+ ions can have a dual origin, in principle, but the close resemblance in the ISEE-1 data between the dynamics of H+ and He++ ions indicates a predominantly solar origin of the H+ ions in the tail, at least. By the same token, the usually minor He+ ions are probably almost entirely of terrestrial origin, because of their similarity to the O+ ions.

  3. Metal is not inert: role of metal ions released by biocorrosion in aseptic loosening--current concepts.

    Science.gov (United States)

    Cadosch, Dieter; Chan, Erwin; Gautschi, Oliver P; Filgueira, Luis

    2009-12-15

    Metal implants are essential therapeutic tools for the treatment of bone fractures and joint replacements. The metals and metal alloys used in contemporary orthopedic and trauma surgery are well tolerated by the majority of patients. However, complications resulting from inflammatory and immune reactions to metal implants have been well documented. This review briefly discusses the different mechanisms of metal implant corrosion in the human body, which lead to the release of significant levels of metal ions into the peri-implant tissues and the systemic blood circulation. Additionally, this article reviews the effects of the released ions on bone metabolism and the immune system and discusses their involvement in the pathophysiological mechanisms of aseptic loosening and metal hypersensitivity in patients with metal implants.

  4. Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys

    Directory of Open Access Journals (Sweden)

    Saleh A. Alkahtani

    2016-01-01

    Full Text Available The present study was performed on A356 alloy [Al-7 wt %Si 0.0.35 wt %Mg]. To that La and Ce were added individually or combined up to 1.5 wt % each. The results show that these rare earth elements affect only the alloy melting temperature with no marked change in the temperature of Al-Si eutectic precipitation. Additionally, rare earth metals have no modification effect up to 1.5 wt %. In addition, La and Ce tend to react with Sr leading to modification degradation. In order to achieve noticeable modification of eutectic Si particles, the concentration of rare earth metals should exceed 1.5 wt %, which simultaneously results in the precipitation of a fairly large volume fraction of insoluble intermetallics. The precipitation of these complex intermetallics is expected to have a negative effect on the alloy performance.

  5. Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys

    Science.gov (United States)

    Alkahtani, Saleh A.; Elgallad, Emad M.; Tash, Mahmoud M.; Samuel, Agnes M.; Samuel, Fawzy H.

    2016-01-01

    The present study was performed on A356 alloy [Al-7 wt %Si 0.0.35 wt %Mg]. To that La and Ce were added individually or combined up to 1.5 wt % each. The results show that these rare earth elements affect only the alloy melting temperature with no marked change in the temperature of Al-Si eutectic precipitation. Additionally, rare earth metals have no modification effect up to 1.5 wt %. In addition, La and Ce tend to react with Sr leading to modification degradation. In order to achieve noticeable modification of eutectic Si particles, the concentration of rare earth metals should exceed 1.5 wt %, which simultaneously results in the precipitation of a fairly large volume fraction of insoluble intermetallics. The precipitation of these complex intermetallics is expected to have a negative effect on the alloy performance. PMID:28787844

  6. Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys.

    Science.gov (United States)

    Alkahtani, Saleh A; Elgallad, Emad M; Tash, Mahmoud M; Samuel, Agnes M; Samuel, Fawzy H

    2016-01-13

    The present study was performed on A356 alloy [Al-7 wt %Si 0.0.35 wt %Mg]. To that La and Ce were added individually or combined up to 1.5 wt % each. The results show that these rare earth elements affect only the alloy melting temperature with no marked change in the temperature of Al-Si eutectic precipitation. Additionally, rare earth metals have no modification effect up to 1.5 wt %. In addition, La and Ce tend to react with Sr leading to modification degradation. In order to achieve noticeable modification of eutectic Si particles, the concentration of rare earth metals should exceed 1.5 wt %, which simultaneously results in the precipitation of a fairly large volume fraction of insoluble intermetallics. The precipitation of these complex intermetallics is expected to have a negative effect on the alloy performance.

  7. Transition Metal Ions at the Crossroads of Mucosal Immunity and Microbial Pathogenesis

    Directory of Open Access Journals (Sweden)

    Vladimir eDiaz-Ochoa

    2014-01-01

    Full Text Available Transition metal ions are essential micronutrients for all living organisms. In mammals, these ions are often protein-bound and sequestered within cells, limiting their availability to microbes. Moreover, in response to infection, mammalian hosts further reduce the availability of metal nutrients by activating epithelial cells and recruiting neutrophils, both of which release metal-binding proteins with antimicrobial function. Microorganisms, in turn, have evolved sophisticated systems to overcome these limitations and acquire the metal ions essential for their growth. Here we review some of the mechanisms employed by the host and by pathogenic microorganisms to compete for transition metal ions, with a discussion of how evading nutritional immunity benefits pathogens. Furthermore, we provide new insights on the mechanisms of host-microbe competition for metal ions in the mucosa, particularly in the inflamed gut.

  8. Rational design of metal ion sequestering agents. 1998 annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, K.N.

    1998-06-01

    'This project addresses fundamental issues and requirements in developing hazardous metal ion separation technologies needed in the treatment and disposal of radioactive and chemical toxic waste. It encompasses the synthesis of new agents, followed by their characterization and evaluation, with the aim to optimize their metal ion sequestering properties for use in applied technologies. This research is focused on the following key areas: (1) basic design and synthesis of new metal ion specific sequestering ligands; (2) structural and thermodynamic investigations of these ligands and their complexes formed with the targeted metal ions; and (3) development of sequestering agents and their incorporation into systems designed to be prototypes of inexpensive and highly effective materials for hazardous metal ion decontamination. Basic studies of the sequestration of relevant toxic metals are required in order to develop processes that will treat effluents sufficiently well to allow direct release into the environment and minimize the production of secondary wastes.'

  9. Luminescence quenching in rare-earth-ion-doped $Al_2O_3$ lasers and its influence on relaxation oscillation frequency

    NARCIS (Netherlands)

    Agazzi, L.; Bernhardi, E.H.; Wörhoff, K.; Pollnau, M.

    2012-01-01

    The impact of luminescence quenching on rare-earth-ion doped lasers is investigated, and we show that the expression for the relaxation oscillation frequency needs to be modified to take the quenching properly into account.

  10. Luminescence quenching in rare-earth-ion-doped Al2O3 lasers and its influence on relaxation oscillation frequency

    NARCIS (Netherlands)

    Agazzi, L.; Bernhardi, Edward; Worhoff, Kerstin; Pollnau, Markus

    The impact of luminescence quenching on rare-earth-ion doped lasers is investigated, and we show that the expression for the relaxation oscillation frequency needs to be modified to take the quenching properly into account.

  11. Metal ion interaction of an oligopeptide fragment representing the regulatory metal binding site of a CueR protein

    DEFF Research Database (Denmark)

    Jancsó, Attila; Szokolai, Hajnalka; Roszahegyi, Livia

    2013-01-01

    Metalloregulatory proteins of the MerR family are transcriptional activators that sense/control the concentration of various metal ions inside bacteria.1 The Cu+ efflux regulator CueR, similarly to other MerR proteins, possesses a short multiple Cys-containing metal binding loop close to the C......-terminus. CueR has a high selectivity for Cu+, Ag+ and Au+, but exhibits no transcriptional activity for the divalent ions Hg2+ and Zn2+.2 The two Cys- residues of the metal binding loop were shown to settle M+ ions into a linear coordination environment but other factors may also play a role in the recognition...

  12. Metal ions, not metal-catalyzed oxidative stress, cause clay leachate antibacterial activity.

    Directory of Open Access Journals (Sweden)

    Caitlin C Otto

    Full Text Available Aqueous leachates prepared from natural antibacterial clays, arbitrarily designated CB-L, release metal ions into suspension, have a low pH (3.4-5, generate reactive oxygen species (ROS and H2O2, and have a high oxidation-reduction potential. To isolate the role of pH in the antibacterial activity of CB clay mixtures, we exposed three different strains of Escherichia coli O157:H7 to 10% clay suspensions. The clay suspension completely killed acid-sensitive and acid-tolerant E. coli O157:H7 strains, whereas incubation in a low-pH buffer resulted in a minimal decrease in viability, demonstrating that low pH alone does not mediate antibacterial activity. The prevailing hypothesis is that metal ions participate in redox cycling and produce ROS, leading to oxidative damage to macromolecules and resulting in cellular death. However, E. coli cells showed no increase in DNA or protein oxidative lesions and a slight increase in lipid peroxidation following exposure to the antibacterial leachate. Further, supplementation with numerous ROS scavengers eliminated lipid peroxidation, but did not rescue the cells from CB-L-mediated killing. In contrast, supplementing CB-L with EDTA, a broad-spectrum metal chelator, reduced killing. Finally, CB-L was equally lethal to cells in an anoxic environment as compared to the aerobic environment. Thus, ROS were not required for lethal activity and did not contribute to toxicity of CB-L. We conclude that clay-mediated killing was not due to oxidative damage, but rather, was due to toxicity associated directly with released metal ions.

  13. MeRNA: a Database of Metal Ion Binding Sites in RNAStructures

    Energy Technology Data Exchange (ETDEWEB)

    Stefan, Liliana R.; Zhang, Rui; Levitan, Aaron G.; Hendrix, DonnaF.; Brenner, Steven E.; Holbrook, Stephen R.

    2005-10-05

    Metal ions are essential for the folding of RNA into stable tertiary structures and for the catalytic activity of some RNA enzymes. To aid in the study of the roles of metal ions in RNA structural biology, we have created MeRNA (Metals in RNA), a comprehensive compilation of all metal binding sites identified in RNA three-dimensional structures available from the Protein Data Bank (PDB) and Nucleic Acid Database (NDB). Currently, our database contains information relating to binding of 9764 metal ions corresponding to 23 distinct elements; in 256 RNA structures. The metal ion locations were confirmed and ligands characterized using original literature references. MeRNA includes eight manually identified metal-ion binding motifs, which are described in the literature. MeRNA is searchable by PDB identifier, metal ion, method of structure determination, resolution and R-values for X-ray structure, and distance from metal to any RNA atom or to water. New structures with their respective binding motifs will be added to the database as they become available. The MeRNA database will further our understanding of the roles of metal ions in RNA folding and catalysis and have applications in structural and functional analysis, RNA design and engineering.

  14. Process for the displacement of cyanide ions from metal-cyanide complexes

    Science.gov (United States)

    Smith, Barbara F.; Robinson, Thomas W.

    1997-01-01

    The present invention relates to water-soluble polymers and the use of such water-soluble polymers in a process for the displacement of the cyanide ions from the metal ions within metal-cyanide complexes. The process waste streams can include metal-cyanide containing electroplating waste streams, mining leach waste streams, mineral processing waste streams, and related metal-cyanide containing waste streams. The metal ions of interest are metals that give very strong complexes with cyanide, mostly iron, nickel, and copper. The physical separation of the water-soluble polymer-metal complex from the cyanide ions can be accomplished through the use of ultrafiltration. Once the metal-cyanide complex is disrupted, the freed cyanide ions can be recovered for reuse or destroyed using available oxidative processes rendering the cyanide nonhazardous. The metal ions are released from the polymer, using dilute acid, metal ion oxidation state adjustment, or competing chelating agents, and collected and recovered or disposed of by appropriate waste management techniques. The water-soluble polymer can then be recycled. Preferred water-soluble polymers include polyethyleneimine and polyethyleneimine having a catechol or hydroxamate group.

  15. The Relationship of Culture Media Composition and Chemical Composition on Spirulina sp for Metal Ion Adsorbent

    Directory of Open Access Journals (Sweden)

    Hilda Zulkifli

    2016-12-01

    Full Text Available The analysis relationship of Spirulina sp medium with chemical composition has been conducted. Chemical analysis was performed using X-Ray Fluorescence analysis. Furthermore, potention of Spirulina sp as adsorbent of metal ions was analyzed using FTIR spectroscopy. The results showed that metals such as Zn, Fe, Mn, Ca, Cu, and Mo were mainly metals in Spirulina sp. These metals were not correlated with cultivated medium of Spirulina sp. Analysis of potention Spirulina sp as metal ions adsorbent showed that Spirulina sp has functional groups –C=O and –OH as ligand. Intercation of metal ions Cu(II and Cr(III with Spirulina sp indicated that metal ions bond to –C=O functional group.

  16. Effect of rare earth metal on the spin-orbit torque in magnetic heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, Kohei; Pai, Chi-Feng; Tan, Aik Jun; Mann, Maxwell; Beach, Geoffrey S. D., E-mail: gbeach@mit.edu [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2016-06-06

    We report the effect of the rare earth metal Gd on current-induced spin-orbit torques (SOTs) in perpendicularly magnetized Pt/Co/Gd heterostructures, characterized using harmonic measurements and spin-torque ferromagnetic resonance (ST-FMR). By varying the Gd metal layer thickness from 0 nm to 8 nm, harmonic measurements reveal a significant enhancement of the effective fields generated from the Slonczewski-like and field-like torques. ST-FMR measurements confirm an enhanced effective spin Hall angle and show a corresponding increase in the magnetic damping constant with increasing Gd thickness. These results suggest that Gd plays an active role in generating SOTs in these heterostructures. Our finding may lead to spin-orbitronics device application such as non-volatile magnetic random access memory, based on rare earth metals.

  17. Electronic and Magnetic Properties of Rare-Earth Metals Doped ZnO Monolayer

    Directory of Open Access Journals (Sweden)

    Changlong Tan

    2015-01-01

    Full Text Available The structural, electronic, and magnetic properties of rare-earth metals doped ZnO monolayer have been investigated using the first-principles calculations. The induced spin polarization is confirmed for Ce, Eu, Gd, and Dy dopings while the induced spin polarization is negligible for Y doping. The localized f states of rare-earth atoms respond to the introduction of a magnetic moment. ZnO monolayer undergoes transition from semiconductor to metal in the presence of Y, Ce, Gd, and Dy doping. More interestingly, Eu doped ZnO monolayer exhibits half-metallic behavior. Our result demonstrates that the RE-doping is an efficient route to modify the magnetic and electronic properties in ZnO monolayer.

  18. Heterogeneous behavior of metalloproteins toward metal ion binding and selectivity: insights from molecular dynamics studies.

    Science.gov (United States)

    Gogoi, Prerana; Chandravanshi, Monika; Mandal, Suraj Kumar; Srivastava, Ambuj; Kanaujia, Shankar Prasad

    2016-07-01

    About one-third of the existing proteins require metal ions as cofactors for their catalytic activities and structural complexities. While many of them bind only to a specific metal, others bind to multiple (different) metal ions. However, the exact mechanism of their metal preference has not been deduced to clarity. In this study, we used molecular dynamics (MD) simulations to investigate whether a cognate metal (bound to the structure) can be replaced with other similar metal ions. We have chosen seven different proteins (phospholipase A2, sucrose phosphatase, pyrazinamidase, cysteine dioxygenase (CDO), plastocyanin, monoclonal anti-CD4 antibody Q425, and synaptotagmin 1 C2B domain) bound to seven different divalent metal ions (Ca(2+), Mg(2+), Zn(2+), Fe(2+), Cu(2+), Ba(2+), and Sr(2+), respectively). In total, 49 MD simulations each of 50 ns were performed and each trajectory was analyzed independently. Results demonstrate that in some cases, cognate metal ions can be exchanged with similar metal ions. On the contrary, some proteins show binding affinity specifically to their cognate metal ions. Surprisingly, two proteins CDO and plastocyanin which are known to bind Fe(2+) and Cu(2+), respectively, do not exhibit binding affinity to any metal ion. Furthermore, the study reveals that in some cases, the active site topology remains rigid even without cognate metals, whereas, some require them for their active site stability. Thus, it will be interesting to experimentally verify the accuracy of these observations obtained computationally. Moreover, the study can help in designing novel active sites for proteins to sequester metal ions particularly of toxic nature.

  19. Competitive adsorption of heavy metal ions on peat

    Institute of Scientific and Technical Information of China (English)

    LIU Zhi-rong; ZHOU Li-min; WEI Peng; ZENG Kai; WEN Chuan-xi; LAN Hui-hua

    2008-01-01

    The uptake capacities, and the adsorption kinetics, of copper, Cu(Ⅱ), nickel, Ni(Ⅱ), and cadmium, Cd(Ⅱ), on peat have been studied under static conditions. The results show that the adsorption rates are rapid: equilibrium is reached in twenty minutes. The adsorption of copper, nickel and cadmium is pH dependent over the pH range from 2 to 6. The adsorption kinetics can be excellently described by the Elovich kinetic equation. The adsorption isotherm fits a Langmuir model very well. The adsorption capacifies follow the order Cu2+>Ni2+>Cd2+ in single-component systems and the competitive adsorption capacities fall in the decreasing order Cu2+> Ni2+>Cd2+ in multi-component systems. The adsorption capacities of these three heavy metal ions on peat are consistent with their observed competitive adsorption capacities.

  20. Surface modification by metal ion implantation forming metallic nanoparticles in an insulating matrix

    Science.gov (United States)

    Salvadori, M. C.; Teixeira, F. S.; Sgubin, L. G.; Cattani, M.; Brown, I. G.

    2014-08-01

    There is special interest in the incorporation of metallic nanoparticles in a surrounding dielectric matrix for obtaining composites with desirable characteristics such as for surface plasmon resonance, which can be used in photonics and sensing, and controlled surface electrical conductivity. We have investigated nanocomposites produced by metal ion implantation into insulating substrates, where the implanted metal self-assembles into nanoparticles. The nanoparticles nucleate near the maximum of the implantation depth profile (projected range), which can be estimated by computer simulation using the TRIDYN code. TRIDYN is a Monte Carlo simulation program based on the TRIM (Transport and Range of Ions in Matter) code that takes into account compositional changes in the substrate due to two factors: previously implanted dopant atoms, and sputtering of the substrate surface. Our study show that the nanoparticles form a bidimentional array buried a few nanometers below the substrate surface. We have studied Au/PMMA (polymethylmethacrylate), Pt/PMMA, Ti/alumina and Au/alumina systems. Transmission electron microscopy of the implanted samples show that metallic nanoparticles form in the insulating matrix. These nanocomposites have been characterized by measuring the resistivity of the composite layer as a function of the implantation dose. The experimental results are compared with a model based on percolation theory, in which electron transport through the composite is explained by conduction through a random resistor network formed by the metallic nanoparticles. Excellent agreement is found between the experimental results and the predictions of the theory. We conclude in that the conductivity process is due only to percolation (when the conducting elements are in geometric contact) and that the contribution from tunneling conduction is negligible.

  1. An Aqueous Metal-ion Capacitor with Oxidised Carbon Nanotubes and Metallic Zinc Electrodes

    Directory of Open Access Journals (Sweden)

    Yuheng Tian

    2016-10-01

    Full Text Available An aqueous metal ion capacitor comprising of a zinc anode, an oxidized carbon nanotubes (oCNTs cathode and a zinc sulfate electrolyte is reported. Since the shuttling cation is Zn2+, this typical metal ion capacitor is named as zinc-ion capacitor (ZIC. The ZIC integrates the divalent zinc stripping/plating chemistry with the surface-enabled pseudocapacitive cation adsorption/desorption on oCNTs. The surface chemistry and crystallographic structure of oCNTs were extensively characterized by combining X-ray photoelectron spectroscopy, Fourier-transformed infrared spectroscopy, Raman spectroscopy and X-ray powder diffraction. The function of the surface oxygen groups in surface cation storage was elucidated by a series of electrochemical measurement and the surface-enabled ZIC showed better performance than the ZIC with an un-oxidized CNT cathode. The reaction mechanism at the oCNT cathode involves the additional reversible Faradaic process, while the CNTs merely show electric double layer capacitive behavior involving a non-Faradaic process. The aqueous hybrid ZIC comprising the oCNT cathode exhibited a specific capacitance of 20 mF cm-2 (corresponding to 53 F g-1 in the range of 0-1.8 V at 10 mV s-1 and a stable cycling performance up to 5000 cycles.

  2. Ion mobility studies of carbohydrates as group I adducts: isomer specific collisional cross section dependence on metal ion radius.

    Science.gov (United States)

    Huang, Yuting; Dodds, Eric D

    2013-10-15

    Carbohydrates play numerous critical roles in biological systems. Characterization of oligosaccharide structures is essential to a complete understanding of their functions in biological processes; nevertheless, their structural determination remains challenging in part due to isomerism. Ion mobility spectrometry provides the means to resolve gas phase ions on the basis of their shape-to-charge ratios, thus providing significant potential for separation and differentiation of carbohydrate isomers. Here, we report on the determination of collisional cross sections for four groups of isomeric carbohydrates (including five isomeric disaccharides, four isomeric trisaccharides, two isomeric pentasaccharides, and two isomeric hexasaccharides) as their group I metal ion adducts (i.e., [M + Li](+), [M + Na](+), [M + K](+), [M + Rb](+), and [M + Cs](+)). In all, 65 collisional cross sections were measured, the great majority of which have not been previously reported. As anticipated, the collisional cross sections of the carbohydrate metal ion adducts generally increase with increasing metal ion radius; however, the collisional cross sections were found to scale with the group I cation size in isomer specific manners. Such measurements are of substantial analytical value, as they illustrate how the selection of charge carrier influences carbohydrate ion mobility determinations. For example, certain pairs of isomeric carbohydrates assume unique collisional cross sections upon binding one metal ion, but not another. On the whole, these data suggest a role for the charge carrier as a probe of carbohydrate structure and thus have significant implications for the continued development and application of ion mobility spectrometry for the distinction and resolution of isomeric carbohydrates.

  3. Cognate and noncognate metal ion coordination in metal-specific metallothioneins: the Helix pomatia system as a model.

    Science.gov (United States)

    Palacios, Oscar; Pérez-Rafael, Sílvia; Pagani, Ayelen; Dallinger, Reinhard; Atrian, Sílvia; Capdevila, Mercè

    2014-08-01

    The Helix pomatia metallothionein (MT) system, namely, its two highly specific forms, HpCdMT and HpCuMT, has offered once again an optimum model to study metal-protein specificity. The present work investigates the most unexplored aspect of the coordination behavior of MT polypeptides with respect to either cognate or noncognate metal ions, as opposed to the standard studies of cognate metal ion coordination. To this end, we analyzed the in vivo synthesis of the corresponding complexes with their noncognate metals, and we performed a detailed spectroscopic and spectrometric study of the Zn(2+)/Cd(2+) and Zn(2+)/Cu(+) in vitro replacement reactions on the initial Zn-HpMT species. An HpCuMTAla site-directed mutant, exhibiting differential Cu(+)-binding abilities in vivo, was also included in this study. We demonstrate that when an MT binds its cognate metal, it yields well-folded complexes of limited stoichiometry, representative of minimal-energy conformations. In contrast, the incorporation of noncognate metal ions is better attributed to an unspecific reaction of cysteinic thiolate groups with metal ions, which is dependent on their concentration in the surrounding milieu, where no minimal-energy structure is reached, and otherwise, the MT peptide acts as a multidentate ligand that will bind metal ions until its capacity has been saturated. Additionally, we suggest that previous binding of an MT polypeptide with its noncognate metal ion (e.g., binding of Zn(2+) to the HpCuMT isoform) may preclude the correct folding of the complex with its cognate metal ion.

  4. Low-temperature photoluminescence in chalcogenide glasses doped with rare-earth ions

    Energy Technology Data Exchange (ETDEWEB)

    Kostka, Petr, E-mail: petr.kostka@irsm.cas.cz [Institute of Rock Structure and Mechanics AS CR, V Holešovičkách 41, 182 09 Praha 8 (Czech Republic); Zavadil, Jiří [Institute of Photonics and Electronics AS CR, Chaberská 57, 182 51 Praha 8, Kobylisy (Czech Republic); Iovu, Mihail S. [Institute of Applied Physics, Academy of Sciences of Moldova, Str. Academiei 5, MD-28 Chisinau, Republic of Moldova (Moldova, Republic of); Ivanova, Zoya G. [Institute of Solid State Physics, Bulgarian Academy of Sciences, 1784 Sofia (Bulgaria); Furniss, David; Seddon, Angela B. [Mid-Infrared Photonics Group, George Green Institute for Electromagnetics Research, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom)

    2015-11-05

    Sulfide and oxysulfide bulk glasses Ga-La-S-O, Ge-Ga-S and Ge-Ga-As-S doped, or co-doped, with various rare-earth (RE{sup 3+}) ions are investigated for their room temperature transmission and low-temperature photoluminescence. Photoluminescence spectra are collected by using external excitation into the Urbach tail of the fundamental absorption edge of the host-glass. The low-temperature photoluminescence spectra are dominated by the broad-band luminescence of the host glass, with superimposed relatively sharp emission bands due to radiative transitions within 4f shells of RE{sup 3+} ions. In addition, the dips in the host-glass luminescence due to 4f-4f up-transitions of RE{sup 3+} ions are observed in the Ge-Ga-S and Ge-Ga-As-S systems. These superimposed narrow effects provide a direct experimental evidence of energy transfer between the host glass and respective RE{sup 3+} dopants. - Highlights: • An evidence of energy transfer from host-glass to doped-in RE ions is presented. • Energy transfer is manifested by dips in host-glass broad-band luminescence. • This channel of energy transfer is documented on selected RE doped sulfide glasses. • Photoluminescence spectra are dominated by broad band host-glass luminescence. • Presence of RE ions is manifested by superimposed narrow 4f-4f transitions.

  5. Shapes of Energetic Ion Spectra in Saturn's Magnetosphere Compared with those at Earth and Jupiter

    Science.gov (United States)

    Hamilton, D. C.; Mitchell, D. G.; Krimigis, S. M.

    2013-12-01

    Saturn's magnetosphere contains suprathermal and energetic ions that originate from a number of plasma sources including Enceladus, Titan, Saturn's atmosphere and ionosphere and the solar wind, with internal sources dominating. Although different species originate at different locations, transport processes and acceleration during or after transport distribute the energetic ions throughout the magnetosphere out to the magnetopause. In principle, the shapes of the energy spectra of these ions contain information on acceleration processes. However, because outside of about 9 RS long-term average spectra of all species are quite good power laws, it is difficult to pick one energy parameter (e.g., energy/charge or energy/nucleon) as better organizing the spectra by, for example, maintaining constant abundance ratios from low to high energies. Inside of 9 RS there are energy-dependent losses that alter the spectra but aren't directly related to acceleration. Here, using data from the Cassini/CHEMS sensor, we investigate ion spectra over the energy per charge range 3-220 keV/e in more detail with better resolution in both space and time, looking for evidence of spectral differences among species based on charge (e.g., O+ vs. O++) or plasma source (e.g., O+ (Enceladus) vs. He++ (solar wind)). We will compare Saturn's ion spectra with those from the magnetospheres of Earth and Jupiter and discuss implications for acceleration processes.

  6. Solvent and metal ion effects on the conformation of cyclosporin

    Science.gov (United States)

    Shaw, R. A.; Mantsch, Henry H.; Chowdhry, Babur Z.

    1994-01-01

    Infrared spectra of cyclosporin A (CsA) and three analogues CsC, CsD, and CsH have been measured (1) in a variety of organic solvents, and (2) in acetonitrile in the presence of lithium, sodium, magnesium, and calcium ions. The amide I (CequalsO stretching) absorption pattern shows a systematic trend with increasing solvent polarity. The spectral changes indicate that polar solvents disrupt two of the four intramolecular hydrogen bonds, leaving the first two hydrogen bonds of the (beta) -sheet structure intact. Interaction of CsA, CsC, or CsD with the monovalent cations Li+ and Na+ in acetonitrile yields spectra that are virtually identical to one another. The spectra suggest that several carbonyl groups bind simultaneously to the metal ion. In contrast the spectra suggest strong binding by Ca2+ and Mg2+ to one or two specific CequalsO groups, as evidenced by very low frequency CequalsO stretching bands observed at ca. 1600 cm-1.

  7. Development of an Electrochemical Metal-Ion Biosensor Using Self-Assembled Peptide Nanofibrils

    DEFF Research Database (Denmark)

    Viguier, Bruno; Zor, Kinga; Kasotakis, Emmanouil

    2011-01-01

    This article describes the combination of self-assembled peptide nanofibrils with metal electrodes for the development of an electrochemical metal-ion biosensor. The biological nanofibrils were immobilized on gold electrodes and used as biorecognition elements for the complexation with copper ion...

  8. "Anion clamp" allows flexible protein to impose coordination geometry on metal ions.

    Science.gov (United States)

    Wang, Minji; Lai, Tsz Pui; Wang, Li; Zhang, Hongmin; Yang, Nan; Sadler, Peter J; Sun, Hongzhe

    2015-05-01

    X-ray crystal structures of human serum transferrin (77 kDa) with Yb(III) or Fe(III) bound to the C-lobe and malonate as the synergistic anion show that the large Yb(III) ion causes the expansion of the metal binding pocket while octahedral metal coordination geometry is preserved, an unusual geometry for a lanthanide ion.

  9. Effects of Lability of Metal Complex on Free Ion Measurement Using DMT

    NARCIS (Netherlands)

    Weng, L.P.; Riemsdijk, van W.H.; Temminghoff, E.J.M.

    2010-01-01

    Very low concentrations of free metal ion in natural samples can be measured using the Donnan membrane technique (DMT) based on ion transport kinetics. In this paper, the possible effects of slow dissociation of metal complexes on the interpretation of kinetic DMT are investigated both theoretically

  10. Measuring free metal ion concentrations in multicomponent solutions using Donnan Membrane Technique

    NARCIS (Netherlands)

    Kalis, E.J.J.; Temminghoff, E.J.M.; Weng, L.P.; Riemsdijk, van W.H.

    2007-01-01

    Among speciation techniques that are able to measure free metal ion concentrations, the Donnan membrane technique (DMT) has the advantage that it can measure many different free metal ion concentrations simultaneously in a multicomponent sample. Even though the DMT has been applied to several system

  11. Red-emitting alkaline-earth rare-earth pentaoxometallates powders prepared by metal carboxylates solution

    Indian Academy of Sciences (India)

    Kyu-Seog Hwang; Sung-Dae Kim; Seung Hwangbo; Jin-Tae Kim

    2013-06-01

    Moisture-insensitive metal carboxylates that are mostly liquids at room temperature have been first applied to the preparation of strontium europium aluminate (Sr2EuAlO5) powders for red-emitting phosphor under near ultraviolet radiation. Strontium naphthenate, aluminium-2-ethylhexanoate and europium-2-ethylhexanoate were dissolved with toluene to prepare starting solution. Precursor pyrolyzed at 500 °C for 240 min was finally annealed at 900–1200 °C for 240 min in Ar. X-ray diffraction analysis, field emission–scanning electron microscope and fluorescent spectrophotometer were used to evaluate structural and optical properties. For the 1000 °C-annealed powders with regular shape and narrow size distribution confirmed by FE–SEM observation, strong red emission at 615nm under the excitation of 395nm maximum was reached, then the higher annealed samples at above 1100 °C gave the lower emission intensities.

  12. Metal Ions Removal Using Nano Oxide Pyrolox™ Material

    Science.gov (United States)

    Gładysz-Płaska, A.; Skwarek, E.; Budnyak, T. M.; Kołodyńska, D.

    2017-02-01

    The paper presents the use of Pyrolox™ containing manganese nano oxides used for the removal of Cu(II), Zn(II), Cd(II), and Pb(II) as well as U(VI) ions. Their concentrations were analyzed using the atomic absorption spectrometer SpectrAA 240 FS (Varian) as well as UV-vis method. For this purpose the static kinetic and equilibrium studies were carried out using the batch technique. The effect of solution pH, shaking time, initial metal ion concentrations, sorbent dosage, and temperature was investigated. The equilibrium data were analyzed using the sorption isotherm models proposed by Freundlich, Langmuir-Freundlich, Temkin, and Dubinin-Radushkevich. The kinetic results showed that the pseudo second order kinetic model was found to correlate the experimental data well. The results indicate that adsorption of Cu(II), Zn(II), Cd(II), and Pb(II) as well as U(VI) ions is strongly dependent on pH. The value of pH 4-7 was optimal adsorption. The time to reach the equilibrium was found to be 24 h, and after this time, the sorption percentage reached about 70%. Kinetics of Cu(II), Zn(II), Cd(II), Pb(II), and U(VI) adsorption on the adsorbent can be described by the pseudo second order rate equation. Nitrogen adsorption/desorption, infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) measurements for adsorbent characterization were performed. Characteristic points of the double layer determined for the studied Pyrolox™ sample in 0.001 mol/dm3 NaCl solution are pHPZC = 4 and pHIEP < 2.

  13. Dispersion coefficients for the interaction of inert gas atoms with alkali and alkaline earth ions and alkali atoms with their singly ionized ions

    CERN Document Server

    Singh, Sukhjit; Sahoo, B K; Arora, Bindiya

    2016-01-01

    We report the dispersion coefficients for the interacting inert gas atoms with the alkali ions, alkaline earth ions and alkali atoms with their singly charged ions. We use our relativistic coupled-cluster method to determine dynamic dipole and quadrupole polarizabilities of the alkali atoms and singly ionized alkaline earth atoms, whereas a relativistic random phase approximation approach has been adopted to evaluate these quantities for the closed-shell configured inert gas atoms and the singly and doubly ionized alkali and alkaline earth atoms, respectively. Accuracies of these results are adjudged from the comparison of their static polarizability values with their respective experimental results. These polarizabilities are further compared with the other theoretical results. Reason for the improvement in the accuracies of our estimated dispersion coefficients than the data listed in [At. Data and Nucl. Data Tables 101, 58 (2015)] are discussed. Results for some of the atom-ion interacting systems were not...

  14. Reactions of metal ions at surfaces of hydrous iron oxide

    Science.gov (United States)

    Hem, J.D.

    1977-01-01

    Cu, Ag and Cr concentrations in natural water may be lowered by mild chemical reduction involving ferric hydroxide-ferrous ion redox processes. V and Mo solubilities may be controlled by precipitation of ferrous vanadate or molybdate. Concentrations as low as 10-8.00 or 10-9.00 M are readily attainable for all these metals in oxygen-depleted systems that are relatively rich in Fe. Deposition of manganese oxides such as Mn3O4 can be catalyzed in oxygenated water by coupling to ferrous-ferric redox reactions. Once formed, these oxides may disproportionate, giving Mn4+ oxides. This reaction produces strongly oxidizing conditions at manganese oxide surfaces. The solubility of As is significantly influenced by ferric iron only at low pH. Spinel structures such as chromite or ferrites of Cu, Ni, and Zn, are very stable and if locally developed on ferric hydroxide surfaces could bring about solubilities much below 10-9.00 M for divalent metals near neutral pH. Solubilities calculated from thermodynamic data are shown graphically and compared with observed concentrations in some natural systems. ?? 1977.

  15. Porous metal oxide microspheres from ion exchange resin

    Science.gov (United States)

    Picart, S.; Parant, P.; Caisso, M.; Remy, E.; Mokhtari, H.; Jobelin, I.; Bayle, J. P.; Martin, C. L.; Blanchart, P.; Ayral, A.; Delahaye, T.

    2015-07-01

    This study is devoted to the synthesis and the characterization of porous metal oxide microsphere from metal loaded ion exchange resin. Their application concerns the fabrication of uranium-americium oxide pellets using the powder-free process called Calcined Resin Microsphere Pelletization (CRMP). Those mixed oxide ceramics are one of the materials envisaged for americium transmutation in sodium fast neutron reactors. The advantage of such microsphere precursor compared to classical oxide powder is the diminution of the risk of fine dissemination which can be critical for the handling of highly radioactive powders such as americium based oxides and the improvement of flowability for the filling of compaction chamber. Those millimetric oxide microspheres incorporating uranium and americium were synthesized and characterizations showed a very porous microstructure very brittle in nature which occurred to be adapted to shaping by compaction. Studies allowed to determine an optimal heat treatment with calcination temperature comprised between 700-800 °C and temperature rate lower than 2 °C/min. Oxide Precursors were die-pressed into pellets and then sintered under air to form regular ceramic pellets of 95% of theoretical density (TD) and of homogeneous microstructure. This study validated thus the scientific feasibility of the CRMP process to prepare bearing americium target in a powder free manner.

  16. Polyazulene based materials for heavy metal ions detection

    Science.gov (United States)

    Oprisanu, A.; Ungureanu, E. M.; Isopescu, R.; Birzan, L.; Mihai, M.; Vasiliu, C.

    2017-06-01

    Azulene is a special monomer used to functionalize electrodes, due to its spontaneous electron drift from the seven-membered ring to the five-membered ring. The seven-membered ring of the molecule may act as electron acceptor, while the five-membered ring - as electron donor. This leads to very attractive properties for the synthesis of functional advanced materials like: materials with nonlinear optical and photorefractive properties, cathode materials for lithium batteries, or light emitting diodes based on organic materials. Azulene derivatives have been used rarely to the metal ions electroanalysis. Our study concerns the synthesis and electrochemical characterization of a new azulene based monomer 4-(azulen-1-yl)-2,6-bis((E)-2-(thiophen-3-yl)vinyl)pyridine (L). L has been used to obtain modified electrodes by electrochemical polymerization. PolyL films modified electrodes have been characterized by cyclic voltammetry in ferrocene solutions. The complexing properties of polyL based functional materials have been investigated towards heavy metals (Pb, Cd Hg, Cu) by preconcentration - anodic stripping technique in order to analyze the content of these cations from water samples.

  17. High pressure phase transitions in the rare earth metal erbium to 151 GPa.

    Science.gov (United States)

    Samudrala, Gopi K; Thomas, Sarah A; Montgomery, Jeffrey M; Vohra, Yogesh K

    2011-08-10

    High pressure x-ray diffraction studies have been performed on the heavy rare earth metal erbium (Er) in a diamond anvil cell at room temperature to a pressure of 151 GPa and Er has been compressed to 40% of its initial volume. The rare earth crystal structure sequence hcp → Sm type → dhcp → distorted fcc (hcp: hexagonal close packed; fcc: face centered cubic; dhcp: double hcp) is observed in Er below 58 GPa. We have carried out Rietveld refinement of crystal structures in the pressure range between 58 GPa and 151 GPa. We have examined various crystal structures that have been proposed for the distorted fcc (dfcc) phase and the post-dfcc phase in rare earth metals. We find that the hexagonal hR 24 structure is the best fit between 58 and 118 GPa. Above 118 GPa, a structural transformation from hR 24 phase to a monoclinic C 2/m phase is observed with a volume change of - 1.9%. We have also established a clear trend for the pressure at which a post-dfcc phase is formed in rare earth metals and show that there is a monotonic increase in this pressure with the filling of 4f shell.

  18. Comparative study of ion cyclotron waves at Mars, Venus and Earth

    Science.gov (United States)

    Wei, H. Y.; Russell, C. T.; Zhang, T. L.; Blanco-Cano, X.

    2011-08-01

    Ion cyclotron waves are generated in the solar wind when it picks up freshly ionized planetary exospheric ions. These waves grow from the free energy of the highly anisotropic distribution of fresh pickup ions, and are observed in the spacecraft frame with left-handed polarization and a wave frequency near the ion's gyrofrequency. At Mars and Venus and in the Earth's polar cusp, the solar wind directly interacts with the planetary exospheres. Ion cyclotron waves with many similar properties are observed in these diverse plasma environments. The ion cyclotron waves at Mars indicate its hydrogen exosphere to be extensive and asymmetric in the direction of the interplanetary electric field. The production of fast neutrals plays an important role in forming an extended exosphere in the shape and size observed. At Venus, the region of exospheric proton cyclotron wave production may be restricted to the magnetosheath. The waves observed in the solar wind at Venus appear to be largely produced by the solar-wind-Venus interaction, with some waves at higher frequencies formed near the Sun and carried outward by the solar wind to Venus. These waves have some similarity to the expected properties of exospherically produced proton pickup waves but are characterized by magnetic connection to the bow shock or by a lack of correlation with local solar wind properties respectively. Any confusion of solar derived waves with exospherically derived ion pickup waves is not an issue at Mars because the solar-produced waves are generally at much higher frequencies than the local pickup waves and the solar waves should be mostly absorbed when convected to Mars distance as the proton cyclotron frequency in the plasma frame approaches the frequency of the solar-produced waves. In the Earth's polar cusp, the wave properties of ion cyclotron waves are quite variable. Spatial gradients in the magnetic field may cause this variation as the background field changes between the regions in which

  19. Lithium-Ion Batteries Being Evaluated for Low-Earth-Orbit Applications

    Science.gov (United States)

    McKissock, Barbara I.

    2005-01-01

    The performance characteristics and long-term cycle life of aerospace lithium-ion (Li-ion) batteries in low-Earth-orbit applications are being investigated. A statistically designed test using Li-ion cells from various manufacturers began in September 2004 to study the effects of temperature, end-of-charge voltage, and depth-of-discharge operating conditions on the cycle life and performance of these cells. Performance degradation with cycling is being evaluated, and performance characteristics and failure modes are being modeled statistically. As technology improvements are incorporated into aerospace Li-ion cells, these new designs can be added to the test to evaluate the effect of the design changes on performance and life. Cells from Lithion and Saft have achieved over 2000 cycles under 10 different test condition combinations and are being evaluated. Cells from Mine Safety Appliances (MSA) and modules made up of commercial-off-the-shelf 18650 Li-ion cells connected in series/parallel combinations are scheduled to be added in the summer of 2005. The test conditions include temperatures of 10, 20, and 30 C, end-of-charge voltages of 3.85, 3.95, and 4.05 V, and depth-of-discharges from 20 to 40 percent. The low-Earth-orbit regime consists of a 55 min charge, at a constant-current rate that is 110 percent of the current required to fully recharge the cells in 55 min until the charge voltage limit is reached, and then at a constant voltage for the remaining charge time. Cells are discharged for 35 min at the current required for their particular depth-of-discharge condition. Cells are being evaluated in four-cell series strings with charge voltage limits being applied to individual cells by the use of charge-control units designed and produced at the NASA Glenn Research Center. These charge-control units clamp the individual cell voltages as each cell reaches its end-of-charge voltage limit, and they bypass the excess current from that cell, while allowing the full

  20. Interaction of lactic acid bacteria with metal ions: opportunities for improving food safety and quality.

    Science.gov (United States)

    Mrvčić, Jasna; Stanzer, Damir; Solić, Ema; Stehlik-Tomas, Vesna

    2012-09-01

    Certain species of lactic acid bacteria (LAB), as well as other microorganisms, can bind metal ions to their cells surface or transport and store them inside the cell. Due to this fact, over the past few years interactions of metal ions with LAB have been intensively investigated in order to develop the usage of these bacteria in new biotechnology processes in addition to their health and probiotic aspects. Preliminary studies in model aqueous solutions yielded LAB with high absorption potential for toxic and essential metal ions, which can be used for improving food safety and quality. This paper provides an overview of results obtained by LAB application in toxic metal ions removing from drinking water, food and human body, as well as production of functional foods and nutraceutics. The biosorption abilities of LAB towards metal ions are emphasized. The binding mechanisms, as well as the parameters influencing the passive and active uptake are analyzed.

  1. Protein-responsive assemblies from catechol-metal ion supramolecular coordination.

    Science.gov (United States)

    Yuan, C; Chen, J; Yu, S; Chang, Y; Mao, J; Xu, Y; Luo, W; Zeng, B; Dai, L

    2015-03-21

    Supramolecular self-assembly driven by catechol-metal ion coordination has gained great success in the fabrication of functional materials including adhesives, capsules, coatings and hydrogels. However, this route has encountered a great challenge in the construction of nanoarchitectures in the absence of removable templates, because of the uncontrollable crosslinking of catechol-metal ion coordination. Herein, we show that a supramolecular approach, combining both catechol-metal ion coordination and polymer self-assembly together, can organize polymers into hybrid nanoassemblies ranging from solid particles, homogeneous vesicles to Janus vesicles. Without the introduction of a specific binding ligand or complicated molecular design, these assemblies can totally disassemble in response to proteins. UV/vis absorption, fluorescence quenching and recovery investigations have confirmed that proteins can seize metal ions from the hybrid nanoassemblies, thus causing the degradation of catechol-metal ion coordination networks.

  2. Electrochemical Metal Ion Sensors. Exploiting Amino Acids and Peptides as Recognition Elements

    Directory of Open Access Journals (Sweden)

    Wenrong Yang

    2001-08-01

    Full Text Available Amino acids and peptides are known to bind metal ions, in some cases very strongly. There are only a few examples of exploiting this binding in sensors. The review covers the current literature on the interaction of peptides and metals and the electrochemistry of bound metal ions. Peptides may be covalently attached to surfaces. Of particular interest is the attachment to gold via sulfur linkages. Sulfur-containing peptides (eg cysteine may be adsorbed directly, while any amino group can be covalently attached to a carboxylic acid-terminated thiol. Once at a surface, the possibility for using the attached peptide as a sensor for metal ions becomes realised. Results from the authors’ laboratory and elsewhere have shown the potential for selective monitoring of metal ions at ppt levels. Examples of the use of poly-aspartic acid and the copper binding peptide Gly-Gly-His for detecting copper ions are given.

  3. Metal ion transport quantified by ICP-MS in intact cells

    Science.gov (United States)

    Figueroa, Julio A. Landero; Stiner, Cory A.; Radzyukevich, Tatiana L.; Heiny, Judith A.

    2016-01-01

    The use of ICP-MS to measure metal ion content in biological tissues offers a highly sensitive means to study metal-dependent physiological processes. Here we describe the application of ICP-MS to measure membrane transport of Rb and K ions by the Na,K-ATPase in mouse skeletal muscles and human red blood cells. The ICP-MS method provides greater precision and statistical power than possible with conventional tracer flux methods. The method is widely applicable to studies of other metal ion transporters and metal-dependent processes in a range of cell types and conditions. PMID:26838181

  4. Interacion of Heavy Metal Ions with C-Phycocyanin: Binding Isotherms and Cooperative Effects

    CERN Document Server

    Gelagutashvili, Eteri

    2007-01-01

    The binding constant of copper(II) ions to C-PC were determined at different ionic strengths from binding isotherms by equilibrium dialysis and flame atomic absorption spectroscopy. Fluorescence and absorbtion spectroscopy provides insight of metal-C-phycocyanin interactions. Fluorescence measurements demonstrate C-PC quenching of heavy metal ions emission intensities. Stern-Volmer quenching constants were obtained from the linear quenching plots. Blue shifts in the fluorescence spectra were observed during metal binding to C-PC. It was shown, that between bound metal ions in C-PC there exists positive cooperativity.

  5. Sunflower stalks as adsorbents for the removal of metal ions from wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Sun, G.; Shi, W. [Univ. of California, Davis, CA (United States). Div. of Textiles and Clothing

    1998-04-01

    Sunflower stalks as adsorbents for the removal of metal ions such as copper, cadmium, zinc, and chromium ions in aqueous solutions were studied with equilibrium isotherms and kinetic adsorptions. The maximum adsorptions of four heavy metals are 29.3 mg/g (Cu{sup 2+}), 30.73 mg/g (Zn{sup 2+}), 42.18 mg/g (Cd{sup 2+}), and 25.07 mg/g (Cr{sup 3+}), respectively. Particle sizes of sunflower stalks affected the adsorption of metal ions; the finer size of particles showed better adsorption to the ions. Temperature also plays an interesting role in the adsorption of different metal ions. Copper, zinc, and cadmium exhibited lower adsorption on sunflower stalks at higher temperature, while chromium showed the opposite phenomenon. The adsorption rates of copper, cadmium, and chromium are quite rapid. Within 60 min of operation about 60--80% of these ions were removed from the solutions.

  6. Conversion of agonist site to metal-ion chelator site in the beta(2)-adrenergic receptor

    DEFF Research Database (Denmark)

    Elling, C E; Thirstrup, K; Holst, Birgitte

    1999-01-01

    in the mutant receptors not by normal catecholamine ligands but instead either by free zinc ions or by zinc or copper ions in complex with small hydrophobic metal-ion chelators. Chelation of the metal ions by small hydrophobic chelators such as phenanthroline or bipyridine protected the cells from the toxic......Previously metal-ion sites have been used as structural and functional probes in seven transmembrane receptors (7TM), but as yet all the engineered sites have been inactivating. Based on presumed agonist interaction points in transmembrane III (TM-III) and -VII of the beta(2)-adrenergic receptor......, in this paper we construct an activating metal-ion site between the amine-binding Asp-113 in TM-III-or a His residue introduced at this position-and a Cys residue substituted for Asn-312 in TM-VII. No increase in constitutive activity was observed in the mutant receptors. Signal transduction was activated...

  7. Previously hidden low-energy ions: a better map of near-Earth space and the terrestrial mass balance

    Science.gov (United States)

    André, Mats

    2015-12-01

    This is a review of the mass balance of planet Earth, intended also for scientists not usually working with space physics or geophysics. The discussion includes both outflow of ions and neutrals from the ionosphere and upper atmosphere, and the inflow of meteoroids and larger objects. The focus is on ions with energies less than tens of eV originating from the ionosphere. Positive low-energy ions are complicated to detect onboard sunlit spacecraft at higher altitudes, which often become positively charged to several tens of volts. We have invented a technique to observe low-energy ions based on the detection of the wake behind a charged spacecraft in a supersonic ion flow. We find that low-energy ions usually dominate the ion density and the outward flux in large volumes in the magnetosphere. The global outflow is of the order of 1026 ions s-1. This is a significant fraction of the total number outflow of particles from Earth, and changes plasma processes in near-Earth space. We compare order of magnitude estimates of the mass outflow and inflow for planet Earth and find that they are similar, at around 1 kg s-1 (30 000 ton yr-1). We briefly discuss atmospheric and ionospheric outflow from other planets and the connection to evolution of extraterrestrial life.

  8. Metal salts for molecular ion yield enhancement in organic secondary ion mass spectrometry: a critical assessment.

    Science.gov (United States)

    Delcorte, A; Bertrand, P

    2005-04-01

    In a search for molecular ion signal enhancement in organic SIMS, the efficiency of a series of organic and inorganic salts for molecular cationization has been tested using a panel of nonvolatile molecules with very different chemical characteristics (leucine enkephalin, Irganox 1010, tetraphenylnaphthalene, polystyrene). The compounds used for cationization include alkali bromide and group Ib metal salts (XBr with X = Li, Na, K; CF3CO2Ag; AgNO3; [CH3COCH=C(O-)CH3]2Cu; AuCl3). Alkali ions, very good for polar molecule cationization, prove to be of limited interest for nonpolar molecules such as polystyrene. Silver trifluoroacetate displays excellent results for all the considered molecules, except for leucine enkephalin (which might be due to the use of different solvents for the analyte and the salt). Instead, silver nitrate mixed with leucine enkephalin in an ethanol solution provides intense molecular signals. The influence of the respective concentrations of analyte and salt in solution, of the silver trifluoroacetate solution stability, and of the sample microstructure on the secondary ion intensities are also investigated. The results of other combinations of analyte and salts are reported. Finally, the use of salts is critically compared to other sample preparation procedures previously proposed for SIMS analysis of large organic molecules.

  9. Phosphate glass core/silica clad fibres with a high concentration of active rare-earth ions

    Science.gov (United States)

    Egorova, O. N.; Galagan, B. I.; Denker, B. I.; Sverchkov, S. E.; Semjonov, S. L.

    2016-12-01

    We report a study of silica-clad composite optical fibres having a phosphate glass core doped with active rare-earth elements. The phosphate glass core allows a high concentration of active rare-earth ions to be obtained, and the silica cladding ensures high mechanical strength and facilitates fusion splicing of such fibres to silica fibres. Owing to the high concentration of active rare-earth ions, this type of fibre is potentially attractive for applications where a small cavity length and high lasing efficiency are needed.

  10. Tunable Solid-State Quantum Memory Using Rare-Earth-Ion-Doped Crystal, Nd3(+):GaN

    Science.gov (United States)

    2017-04-26

    Research Initiative was to work on developing solid-state quantum memory using cryogenically cooled rare- earth -ion-doped crystal, Nd3+:GaN. The samples...Initiative (DRI) was to work on developing solid-state quantum memory using cryogenically cooled rare- earth -ion- doped crystal, Nd3+:GaN. The samples were...Caltech group has been working in the area of quantum information of rare- earth doped solids for a number of years and is well equipped to perform

  11. Multidiagnostics analysis of ion dynamics in ultrafast laser ablation of metals over a large fluence range

    Energy Technology Data Exchange (ETDEWEB)

    Anoop, K. K.; Polek, M. P.; Bruzzese, R.; Amoruso, S.; Harilal, Sivanandan S.

    2015-02-28

    The ions dynamics in ultrafast laser ablation of metals is studied over a fluence range spanning from the ablation threshold up to ~75 J/cm2 by means of three established diagnostic techniques. Langmuir probe, Faraday cup and spectrally resolved ICCD imaging simultaneously monitor the laser-produced plasma ions produced during ultrafast laser ablation of a copper target. The fluence dependence of ion yield is analyzed observing the occurrence of three different regimes. Moreover, the specific ion yield shows a maximum at about 4-5 J/cm2, followed by a gradual reduction and a transition to a high-fluence regime above ~50 J/cm2. The fluence variation of the copper ions angular distribution is also analyzed, observing a gradual increase of forward peaking of Cu ions for fluences up to ~10 J/cm2. Then, a broader ion component is observed at larger angles for fluences larger than ~10 J/cm2. Finally, an experimental characterization of the ions angular distribution for several metallic targets (Mg, Al, Cr, Fe, Cu, and W) is carried out at a relatively high fluence of ~66 J/cm2. Interestingly, the ion emission from the volatile metals show a narrow forward peaked distribution and a high peak ion yield compared to the refractory metals. Moreover, the width of ion angular distributions presents a striking correlation with the peak ion yield.

  12. A study of the formation and dynamics of the Earth's plasma sheet using ion composition data

    Energy Technology Data Exchange (ETDEWEB)

    Lennartsson, O.W.

    1994-04-01

    Over two years of data from the Lockheed Plasma Composition Experiment on the ISEE 1 spacecraft, covering ion energies between 100 eV/e and about 16 keV/e, have been analyzed in an attempt to extract new information about three geophysical issues: (1) solar wind penetration of the Earth's magnetic tail; (2) relationship between plasma sheet and tail lobe ion composition; and (3) possible effects of heavy terrestrial ions on plasma sheet stability.

  13. Correlation analysis on partition of rare earth in ion-exchangeable phase from weathered crust ores

    Institute of Scientific and Technical Information of China (English)

    CHI Ru-an; DAI Zu-xu; XU Zhi-gao; WU Yuan-xin; WANG Cun-wen

    2006-01-01

    The rare earth(RE) in weathered crust ores mainly exists as ion-exchangeable phase, approximately 80%. The correlation analysis on partition of 376 samples in ion-exchangeable phase from weathered crust ores was conducted. The results show that partition both among heavy RE elements and light RE elements with high partition appears positive correlation, but partition sums between the heavy RE elements and the light RE elements appear close negative correlation obviously. Clear negative correlations exist between the light RE elements (except Ce) and yttrium(Y). Matrix of correlation analysis on this partition can be divided into three zones. The correlated coefficient variation from negative to positive in zones B and C occurs at Gd, so does that in zones B and A (except Ce, Eu, and Sm), suggesting that RE elements can be divided into two groups with Gd as border. This phenomenon is called Gadolinium-broken effect.

  14. Theoretical study of the alkaline-earth (LiBe)+ ion: structure, spectroscopy and dipole moments

    Science.gov (United States)

    Ghanmi, C.; Farjallah, M.; Berriche, H.

    2017-03-01

    We study theoretically the structure and spectroscopic properties of the alkali alkaline-earth (LiBe)+ ion. The potential energy curves and their spectroscopic parameters, permanent and transition dipole moments are determined with a quantum chemistry approach. The (LiBe)+ ion is modelled as two valence electron system moving in the field of Be2+ and Li+ cores, which are described by pseudopotentials. In addition, effective core-polarization potentials are included to correct the energy. The molecular calculations are performed using a standard quantum chemistry approach based on the pseudopotential model, Gaussian basis sets, effective core polarization potentials, and full configuration interaction (CI) calculations. The precision of our spectroscopic parameters are discussed by comparison with currently available theoretical results. A rather good agreement is observed for the ground and first excited states. The permanent dipole moments reveal many abrupt changes, which are localized at particular distances corresponding to the positions of the avoided crossings.

  15. Multi-Rare-Earth Ions Codoped Tellurite Glasses for Potential Dual Wavelength Fibre-Optic Amplifiers

    Institute of Scientific and Technical Information of China (English)

    DAI Shi-Xun; YANG Jian-Hu; XU Shi-Qing; DAI Neng-Li; WEN Lei; HU Li-Li; JIANG Zhong-Hong

    2003-01-01

    A novel co-doping method of multi-rare-earth (RE) ions was demonstrated in tellurite glasses for fibre amplifiers. Fluorescence emissions at both 1.53 and 1.63 fj,m communication windows were Brstly observed from Er3+ /Yb3+ /Tm3+ -codoped tellurite glasses under a single wavelength pumping at 980 nm. The full width at half maximum of Suorescence at 1.53 and 1.63 [im are 55 nm and 50 urn, respectively. Tm's codoping method of three RE ions could be applied to other low photon energy glasses, which would be possibly used for potential dual wavelength fibre-optic amplifiers to broaden the communication windows.

  16. Importance of diffuse metal ion binding to RNA.

    Science.gov (United States)

    Tan, Zhi-Jie; Chen, Shi-Jie

    2011-01-01

    RNAs are highly charged polyanionic molecules. RNA structure and function are strongly correlated with the ionic condition of the solution. The primary focus of this article is on the role of diffusive ions in RNA folding. Due to the long-range nature of electrostatic interactions, the diffuse ions can contribute significantly to RNA structural stability and folding kinetics. We present an overview of the experimental findings as well as the theoretical developments on the diffuse ion effects in RNA folding. This review places heavy emphasis on the effect of magnesium ions. Magnesium ions play a highly efficient role in stabilizing RNA tertiary structures and promoting tertiary structural folding. The highly efficient role goes beyond the mean-field effect such as the ionic strength. In addition to the effects of specific ion binding and ion dehydration, ion-ion correlation for the diffuse ions can contribute to the efficient role of the multivalent ions such as the magnesium ions in RNA folding.

  17. Nanometer structure and conductor mechanism of polymer modified by metal ion implantation

    Institute of Scientific and Technical Information of China (English)

    吴瑜光; 张通和; 张燕文; 张荟星; 张孝吉; 周固

    2001-01-01

    Polyethylene terephthalate (PET) has been modified by Ag, Ti, Cu and Si ion implanta-tion with a dose ranging from 1 × l016 to 2 x 1017 ions/cm2 using a metal vapor vacuum arc (MEVVA)source. The electrical properties of PET have been improved by metal ion implantation. The resistivityof implanted PET decreased obviously with an increase in ion dose. The results show that the conduc-tive behavior of a metal ion implanted sample is different from Si-implantation samples. In order to un-derstant the mechanism of electrical conduction, the structures of implanted layer were observed in de-tail by XRD and TEM. The nano carbon particles were dispersed in implanted PET. The nano metallicparticles were built up in metallic ion implanted layers with dose range from 1 × 1016 to 1 x 1017 ions/cm2. The nanometer metal net structure was formed in implanted layer when a dose of 2 x 1017ions/cm2 is reached. Anomalous fractal growths were observed. These surface structure changes revealedconducting mechanism evolution, lt is believed that the change would result in an improvement of theconductive properties. The conducting mechanism will be changed with increasing metal ion dose.

  18. Heterocyclic ring based colorimetric and fluorescent chemosensor for transition metal ions in an aqueous medium

    Energy Technology Data Exchange (ETDEWEB)

    Udhayakumari, Duraisamy [Department of Chemistry, Organic and Polymer Synthesis Laboratory, National Institute of Technology, Tiruchirappalli 620015 (India); Velmathi, Sivan, E-mail: velmathis@nitt.edu [Department of Chemistry, Organic and Polymer Synthesis Laboratory, National Institute of Technology, Tiruchirappalli 620015 (India); Boobalan, Maria susai [Department of Chemistry, St. Joseph' s College (Autonomous), Tiruchirappalli 620002 (India); Venkatesan, Parthiban; Wu, Shu-Pao [Department of Applied Chemistry, National Chiao Tung University, Hsinchu 300, Taiwan, ROC (China)

    2015-02-15

    Heterocyclic ring based R1–R3 have been synthesized from the simple condensation method. R1–R3 exhibit highly selective and sensitive recognition towards transition metal ions in an aqueous medium via visual color change and were further confirmed by UV–vis and fluorescent spectroscopic methods. Fluorescent turn on and turn off behavior was observed for receptors tested with transition metal ions. The interaction of transition metal ions and receptors R1–R3 was confirmed to adopt 1:1 binding stoichiometry. Micromolar detection limit was found for R1–R3 with metal ions. DFT theoretical calculations were employed to understand the sensing mechanism of the sensors towards the metal ions. R1 and R2 were also successfully demonstrated as a fluorescent probe for detecting Cu{sup 2+} ions in living cells. - highlights: • R1–R3 act as colorimetric and fluorescent sensors for metal ions. • Receptors (R1–R3) detect Cu{sup 2+} ions in aqueous solution at nanomolar levels. • R1 and R2 act as a fluorescent probe for detecting Cu{sup 2+} ions in living cells.

  19. Rare earth element recycling from waste nickel-metal hydride batteries.

    Science.gov (United States)

    Yang, Xiuli; Zhang, Junwei; Fang, Xihui

    2014-08-30

    With an increase in number of waste nickel-metal hydride batteries, and because of the importance of rare earth elements, the recycling of rare earth elements is becoming increasingly important. In this paper, we investigate the effects of temperature, hydrochloric acid concentration, and leaching time to optimize leaching conditions and determine leach kinetics. The results indicate that an increase in temperature, hydrochloric acid concentration, and leaching time enhance the leaching rate of rare earth elements. A maximum rare earth elements recovery of 95.16% was achieved at optimal leaching conditions of 70°C, solid/liquid ratio of 1:10, 20% hydrochloric acid concentration, -74μm particle size, and 100min leaching time. The experimental data were best fitted by a chemical reaction-controlled model. The activation energy was 43.98kJ/mol and the reaction order for hydrochloric acid concentration was 0.64. The kinetic equation for the leaching process was found to be: 1-(1-x)(1/3)=A/ρr0[HCl](0.64)exp-439,8008.314Tt. After leaching and filtration, by adding saturated oxalic solution to the filtrate, rare earth element oxalates were obtained. After removing impurities by adding ammonia, filtering, washing with dilute hydrochloric acid, and calcining at 810°C, a final product of 99% pure rare earth oxides was obtained.

  20. Measurement of free heavy metal ion concentrations in soils using Donnan membrane technique

    Institute of Scientific and Technical Information of China (English)

    YI Li; HONG Yetang; WENG Liping; ZHU Yongxuan

    2005-01-01

    In natural systems heavy metals are present in very low concentrations (less than micro-molar), so precise measurement of the free metal ions is difficult. Recently, a new method has been developed called the Donnan membrane technique (DMT). Several heavy metals could be measured simultaneously using this method. Furthermore, all the metals did not interfere with each other, and the balance between the measured system and the surrounding condition could not be disturbed. Improvements were made according to the internal condition. The free heavy metal ion concentrations were measured in different systems using the improved method, and satisfied results have been obtained.

  1. Review- Magnetic orientation and magnetic anisotropy in paramagnetic layered oxides containing rare-earth ions

    Directory of Open Access Journals (Sweden)

    Shigeru Horii, Atsushi Ishihara, Takayuki Fukushima, Tetsuo Uchikoshi, Hiraku Ogino, Tohru S Suzuki, Yoshio Sakka, Jun-ichi Shimoyama and Kohji Kishio

    2009-01-01

    Full Text Available The magnetic anisotropies and easy axes of magnetization at room temperature were determined, and the effects of rare-earth (RE ions were clarified for RE-based cuprates, RE-doped bismuth-based cuprates and RE-doped Bi-based cobaltite regarding the grain orientation by magnetic field. The easy axis, determined from the powder orientation in a static field of 10 T, depended qualitatively on the type of RE ion for all three systems. On the other hand, the magnetization measurement of the c-axis oriented powders, aligned in static or rotating fields, revealed that the type of RE ion strongly affected not only the directions of the easy axis but also the absolute value of magnetic anisotropy, and an appropriate choice of RE ion is required to minimize the magnetic field used for grain orientation. We also studied the possibility of triaxial grain orientation in high-critical-temperature superconductors by a modulated oval magnetic field. In particular, triaxial orientation was attempted in a high-oxygen-pressure phase of orthorhombic RE-based cuprates Y2Ba4Cu7Oy. Although the experiment was performed in epoxy resin, which is not practical, in-plane alignment within 3° was achieved.

  2. Observations of energetic helium ions in the earth's radiation belts during a sequence of geomagnetic storms

    Science.gov (United States)

    Spjeldvik, W. N.; Fritz, T. A.

    1981-01-01

    Observations of energetic (MeV) helium ions made with Explorer 45 during a sequence of magnetic storms during June through December of 1972 are presented. It is noted that the first of these storms started on June 17 and had a Dst index excursion to -190 gamma and that the MeV helium ions were perturbed primarily beyond 3 earth radii in the equatorial radiation belts with a typical flux increase of an order of magnitude at L equal to 4. The second storm period was in August and was associated with very major solar flare activity. While the Dst extremum was at best 35 gamma less than the June storm, this period can be characterized as irregular (or multi-storm) with strong compression of the magnetosphere and very large (order of magnitude) MeV helium ion flux enhancements down to L approximately equal to 2. After this injection, the trapped helium ion fluxes showed positive spherical slope with the peak beyond 3.15 MeV at L equal to 2.5; at the lowest observable L shells, little flux decay was seen during the remainder of the year.

  3. Chemoselective single-site Earth-abundant metal catalysts at metal–organic framework nodes

    Science.gov (United States)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin

    2016-01-01

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal–organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C–H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals. PMID:27574182

  4. Metal-on-metal bearings in total hip arthroplasties : Influence of cobalt chromium ions on bacterial growth and biofilm formation

    NARCIS (Netherlands)

    Hosman, Anton H.; van der Mei, Henny C.; Bulstra, Sjoerd K.; Busscher, Henk J.; Neut, Danielle

    2009-01-01

    Metal-on-metal (MOM) bearings involving cobalt-chromium (Co-Cr) alloys in total hip arthroplasties are becoming more and more popular due to their low wear. Consequences of corrosion products of Co-Cr alloys are for the most part unclear, and the influence of cobalt and chromium ions on biofilm form

  5. Distribution of Rare Earth Metals in Technogenic Wastes of Energy Enterprises (Results of the Laboratory Studies)

    OpenAIRE

    Alexandr Ivanovich Khanchuk; Aleksandr Alekseevich Yudakov; Mikhail Azaryevich Medkov; Leonid Nikolayevich Alekseyko; Andrey Vasilyevich Taskin; Sergey Igorevich Ivannikov

    2016-01-01

    The results of the research interaction between ash and slag samples from Vladivostok TPP’s landfills saturated with underburning and ammonium hydrodifluoride were given. It was found out that the reactions of the main components of a concentrate with NH4HF2 are flowing with creation of complex ammonium fluoro-metalate. It is shown that the distribution of REM (rare earth metals) between foam and heavier products is going during the flotation process of carbon-containing ash and slag samples ...

  6. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    OpenAIRE

    Opiela M.; Grajcar A.

    2012-01-01

    The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and...

  7. Thermal oxidation of the surface of binary aluminum alloys with rare-earth metals

    Science.gov (United States)

    Akashev, L. A.; Popov, N. A.; Kuznetsov, M. V.; Shevchenko, V. G.

    2015-05-01

    The kinetics of oxidation of the surface of Al alloys with 1-2.5 at % rare-earth metals (REMs) at 400-500°C in air was studied by ellipsometry and X-ray photoelectron spectroscopy (XPS). The addition (1-2.5 at % REM) of all rare-earth metals to aluminum was shown to increase the thickness of the oxide layer. The addition of surfactant and chemically active REMs (Yb, Sm, La, and Ce) increased the rate of oxidation of solid aluminum most effectively. The oxidation can be accelerated by the polymorphic transformations of the individual REM oxides in the film. The surface activity of Sm with respect to solid Al was confirmed by XRS.

  8. Distribution of Rare Earth Metals in Technogenic Wastes of Energy Enterprises (Results of the Laboratory Studies

    Directory of Open Access Journals (Sweden)

    Alexandr Ivanovich Khanchuk

    2016-12-01

    Full Text Available The results of the research interaction between ash and slag samples from Vladivostok TPP’s landfills saturated with underburning and ammonium hydrodifluoride were given. It was found out that the reactions of the main components of a concentrate with NH4HF2 are flowing with creation of complex ammonium fluoro-metalate. It is shown that the distribution of REM (rare earth metals between foam and heavier products is going during the flotation process of carbon-containing ash and slag samples without significant concentrating. It is shown that the water leaching of fluoridated product lets transfer silicone, aluminum and iron salts into solution and concentrate rare earth elements in insoluble residue in the form of complex salts of NaLnF4 general formula. We propose a schematic diagram of hydrodifluoride recycling of carbon-containing sample, which provides concentrating of REM with incomplete separation of macro-components.

  9. Molecular dynamics of liquid alkaline-earth metals near the melting point

    Indian Academy of Sciences (India)

    J K Baria; A R Jani

    2010-10-01

    Results of the studies of the properties like binding energy, the pair distribution function (), the structure factor (), specific heat at constant volume, velocity autocorrelation function (VACF), radial distribution function, self-diffusion coefficient and coordination number of alkaline-earth metals (Be, Mg, Ca, Sr and Ba) near melting point using molecular dynamics (MD) simulation technique using a pseudopotential proposed by us are presented in this article. Good agreement with the experiment is achieved for the binding energy, pair distribution function and structure factor, and these results compare favourably with the results obtained by other such calculations, showing the transferability of the pseudopotential used from solid to liquid environment in the case of alkaline-earth metals.

  10. The effect of metal ions on the photophysical and photochemical property of phenylthio bromo metal phthalocyanines

    Science.gov (United States)

    Pan, Sujuan; Shen, Pingping; Ma, Dongdong; Wang, Yuhua; Zhang, Tiantian; Chen, Kuizhi; Yang, Hongqin; Xie, Shusen; Peng, Yiru

    2016-10-01

    Phthalocyanines have attracted great attention because of their applications in material science including electro-optical devices, electrochromic display, and photodynamic therapy (PDT) of cancer. In addition, the Pcs exhibit great flexibility of chemical structure modification enabled by either peripheral substituents or metal ions co-ordination to central cavity of highly conjugated tetrapyrrolic macrocycles. However, because of the hydrophobic nature of the phthalocyanine ring, Pcs have strong tendency to aggregate in solution, which limited their applications. To overcome this problem, the introduction of dendritic wedge to peripheral positions of phthalocyanines can prevent the formation of aggregation to some extent. The preparation procedure involved the modification of the zinc (II) and magnesium (II) phthalocyanines with peripherally dendritic substitutions. The photophysical and photochemical properties of dendritic phthalocyanines were studied by UV/Vis and fluorescence spectroscopic methods. Compared with the magnesium (II) phthalocyanine, the intensity of Q band of zinc (II) phthalocyanine was increased but no obviously position changes was observed. Furthermore, the zinc (II) phthalocyanine exhibited relatively higher fluorescence intensity than the magnesium (II) phthalocyanine. The fluorescence quantum yield and lifetimes of magnesium (II) phthalocyanine was clearly longer than that of zinc (II) phthalocyanine. As the better photosensitizer, the zinc (II) phthalocyanine has higher singlet oxygen quantum yield owning superior performance. This results indicated that the singlet oxygen quantum yield would be effected by the nature of metal ions.

  11. Development of materials for the removal of metal ions from radioactive and non-radioactive waste streams

    Science.gov (United States)

    Hasan, Md. Shameem

    Nuclear wastes that were generated during cold-war era from various nuclear weapon programs are presently stored in hundreds of tanks across the United States. The composition of these wastes is rather complex containing both radionuclides and heavy metals, such as 137Cs, 90Sr, Al, Pb, Cr, and Cd. In this study, chitosan based biosorbents were prepared to adsorb some of these metal ions. Chitosan is a partially acetylated glucosamine biopolymer encountered in the cell walls of fungi. In its natural form this material is soft and has a tendency to agglomerate or form gels. Various methods were used to modify chitosan to avoid these problems. Chitosan is generally available commercially in the form of flakes. For use in an adsorption system, chitosan was made in the form of beads to reduce the pressure drop in an adsorption column. In this research, spherical beads were prepared by mixing chitosan with perlite and then by dropwise addition of the slurry mixture into a NaOH precipitation bath. Beads were characterized using Fourier Transform InfraRed Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy dispersive spectroscopy (EDS), Tunneling Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and Thermogravimetric Analysis (TGA). The SEM, EDS, and TEM data indicated that the beads were porous in nature. The TGA data showed that bead contained about 32% chitosan. The surface area, pore volume, and porosity of the beads were determined from the BET surface area that was measured using N2 as adsorbate at 77K. Adsorption and desorption of Cr(VI), Cr(III), Cd(II), U(VI), Cu(II), from aqueous solutions of these metal ions were studied to evaluate the adsorption capacities of the beads for these metals ions. Equilibrium adsorption data of these metals on the beads were found to correlate well with the Langmuir isotherm equation. Chitosan coated perlite beads had negligible adsorption capacity for Sr(II) and Cs(I). It was found that Fullers earth

  12. Formation of an integrated holding company to produce rare-earth metal articles

    Science.gov (United States)

    Bogdanov, S. V.; Grishaev, S. I.

    2013-12-01

    The possibility of formation of a Russian holding company for the production of rare-earth metal articles under conditions of its increasing demand on the world market is considered. It is reasonable to ensure stable business operation on the market under conditions of state-private partnership after the fraction of soled products is determined and supported by the competitive advantages of Russian products.

  13. Optimization of film synthesized rare earth transition metal permanent magnet systems

    Energy Technology Data Exchange (ETDEWEB)

    Cadieu, F.J.

    1992-01-01

    Progress is reported in three areas: high coercivity Sm-Fe-Ti-V, Sm-Fe-Zr, and two element Sm-Fe Sm{sub 5}(Fe,T){sub 17} type crystalline phases; ThMn{sub 12} type pseudobinary SmFe{sub 12-x}T{sub x}(0{le}{times}{le}1.5); and sputter process control for the synthesis of precisely textured rare earth-transition metal magnetic films. (DLC)

  14. Neutral binuclear rare-earth metal complexes with four μ₂-bridging hydrides.

    Science.gov (United States)

    Rong, Weifeng; He, Dongliang; Wang, Meiyan; Mou, Zehuai; Cheng, Jianhua; Yao, Changguang; Li, Shihui; Trifonov, Alexander A; Lyubov, Dmitrii M; Cui, Dongmei

    2015-03-25

    The first neutral rare-earth metal dinuclear dihydrido complexes [(NPNPN)LnH2]2 (2-Ln; Ln = Y, Lu; NPNPN: N[Ph2PNC6H3((i)Pr)2]2) bearing μ2-bridging hydride ligands have been synthesized. In the presence of THF, 2-Y undergoes intramolecular activation of the sp(2) C-H bond to form dinuclear aryl-hydride complex 3-Y containing three μ2-bridging hydride ligands.

  15. Determination of ammonium ion in biological nitrification-denitrification process water by ion exclusion chromatography with ion exchange enhancement of conductivity detection.

    OpenAIRE

    田中, 一彦; 黒川, 利一; 中島, 良三; Fritz, James S.

    1988-01-01

    Ammonium ion in biological nitrification-denitrification process with batchwise treatment was determined by ion exclusion chromatography using water as an eluent with ion exchange enhancement of conductivity. Ammonium ion was selectively separated by ion exclusion from alkali metal and alkaline earth metal cations. The detection sensitivity of the ammonium ion was improved about 11-fold with two ion exchange enhancement columns inserted in series between the separation column packed with OH--...

  16. Metal ions removal from polluted waters by sorption onto exhausted coffee waste. Application to metal finishing industries wastewater treatment

    OpenAIRE

    Liu, Chang

    2014-01-01

    A new technology for Cr(VI) and divalent metal ions removal based on metal sorption onto exhausted coffee waste has been developed. Physical and chemical characterization of exhausted coffee waste was explored as well as the role of structural and non structural compounds of the waste in metal ions sorption. Kinetics of Cr(VI) sorption from binary mixtures containing different Cr(VI) and Cu(II) molar ratios were carried out in a batch reactor. A synergistic effect of Cu(II) in Cr(VI) reductio...

  17. Ground-state properties of rare-earth metals: an evaluation of density-functional theory.

    Science.gov (United States)

    Söderlind, Per; Turchi, P E A; Landa, A; Lordi, V

    2014-10-15

    The rare-earth metals have important technological applications due to their magnetic properties, but are scarce and expensive. Development of high-performance magnetic materials with less rare-earth content is desired, but theoretical modeling is hampered by complexities of the rare earths electronic structure. The existence of correlated (atomic-like) 4f electrons in the vicinity of the valence band makes any first-principles theory challenging. Here, we apply and evaluate the efficacy of density-functional theory for the series of lanthanides (rare earths), investigating the influence of the electron exchange and correlation functional, spin-orbit interaction, and orbital polarization. As a reference, the results are compared with those of the so-called 'standard model' of the lanthanides in which electrons are constrained to occupy 4f core states with no hybridization with the valence electrons. Some comparisons are also made with models designed for strong electron correlations. Our results suggest that spin-orbit coupling and orbital polarization are important, particularly for the magnitude of the magnetic moments, and that calculated equilibrium volumes, bulk moduli, and magnetic moments show correct trends overall. However, the precision of the calculated properties is not at the level of that found for simpler metals in the Periodic Table of Elements, and the electronic structures do not accurately reproduce x-ray photoemission spectra.

  18. Low temperature route for the synthesis of rare earth transition metal borides and their hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Kramp, S.; Febri, M.; Joubert, J.C. [CNRS UMR 5628, Saint Martin d`Heres (France)

    1997-10-01

    Synthesis of rare earth-based alloys by the ORD technique consists in the reduction of rare earth oxides in a melt of calcium under argon, and simultaneous diffusion-reaction of the just formed rare earth metal with the other elements. This method has been applied with success to numerous ternary borides containing transition metals such as the magnetic alloys Y{sub 2}Co{sub 14}B, LnCo{sub 4}B, and YCo{sub 3}B{sub 2}. By using a small excess of Ca, boride particles grow in a viscous slurry media containing unreacted (melted) Ca and nanosize CaO particles. Single phase boride alloys can be obtained at 1000{degrees}C as loose micrometer-size particles of very high crystal quality as confirmed by the sharp diffraction peaks on the corresponding X-ray diagrams. Particles can be easily recovered by gentle wishing in diluted weak acid solution, and dried under vacuum at room temperature. This rather low temperature technique is particularly adapted to the synthesis of incongruent melting phases, as well as for the alloys containing volatile rare earth elements (Sm, Yb, Tb,...).

  19. A Low Temperature Route for the Synthesis of Rare Earth Transition Metal Borides and Their Hydrides

    Science.gov (United States)

    Kramp, S.; Febri, M.; Joubert, J. C.

    1997-10-01

    Synthesis of rare earth-based alloys by the ORD technique consists in the reduction of rare earth oxides in a melt of calcium under argon, and simultaneous diffusion-reaction of the just formed rare earth metal with the other elements. This method has been applied with success to numerous ternary borides containing transition metals such as the magnetic alloys Y2Co14B, LnCo4B, and YCo3B2. By using a small excess of Ca, boride particles grow in a viscous slurry media containing unreacted (melted) Ca and nanosize CaO particles. Single phase boride alloys can be obtained at 1000°C as loose micrometer-size particles of very high crystal quality as confirmed by the sharp diffraction peaks on the corresponding X-ray diagrams. Particles can be easily recovered by gentle washing in diluted weak acid solution, and dried under vacuum at room temperature. This rather low temperature technique is particularly adapted to the synthesis of incongruent melting phases, as well as for the alloys containing volatile rare earth elements (Sm, Yb, Tb,…).

  20. Effect of Rare Earth Metals on Structure and Properties of Electroless Co-B Alloy Coating

    Institute of Scientific and Technical Information of China (English)

    宣天鹏; 张雷; 黄秋华

    2002-01-01

    The effect of rare earth metals cerium, lanthanum and yttrium on chemical composition, structure and properties of electroless Co-B alloy coating was studied. By plasma transmitting spectrograph, electron energy spectrometer, X-ray diffractometter, micro-hardometer and vibratory sample magnetometer the chemical constitution, structure and properties of the alloy coatings were analyzed and inspected. The results show that with a tiny quantity of rare earth metal added into Co-B alloy coating, the content of boron is decreased in the alloy coatings, and the kinds of rare earth metal have enormous effect on the structure and properties of electroless Co-B alloy coating. At the same time electroless Co-B alloy with amorphous structure is transformed to electroless Co-B-RE alloy with microcrystalline or crystalline structure. In this way microhardness of the coatings is increased remarkably. Cerium and lanthanum would also increase the saturated magnetic intensity and decrease coercitive force of the coating. So soft magnetization of the coatings would be improved.

  1. A new strategy to stabilize oxytocin in aqueous solutions : I. The effects of divalent metal ions and citrate buffer

    NARCIS (Netherlands)

    Avanti, Christina; Amorij, Jean-Pierre; Setyaningsih, Dewi; Hawe, Andrea; Jiskoot, Wim; Visser, Jan; Kedrov, Alexej; Driessen, Arnold J. M.; Hinrichs, Wouter L. J.; Frijlink, Henderik W.

    In the current study, the effect of metal ions in combination with buffers (citrate, acetate, pH 4.5) on the stability of aqueous solutions of oxytocin was investigated. Both monovalent metal ions (Na+and K+) and divalent metal ions (Ca2+, Mg2+, and Zn2+) were tested all as chloride salts. The

  2. A new strategy to stabilize oxytocin in aqueous solutions : I. The effects of divalent metal ions and citrate buffer

    NARCIS (Netherlands)

    Avanti, Christina; Amorij, Jean-Pierre; Setyaningsih, Dewi; Hawe, Andrea; Jiskoot, Wim; Visser, Jan; Kedrov, Alexej; Driessen, Arnold J. M.; Hinrichs, Wouter L. J.; Frijlink, Henderik W.

    2011-01-01

    In the current study, the effect of metal ions in combination with buffers (citrate, acetate, pH 4.5) on the stability of aqueous solutions of oxytocin was investigated. Both monovalent metal ions (Na+and K+) and divalent metal ions (Ca2+, Mg2+, and Zn2+) were tested all as chloride salts. The effec

  3. Dosimetric and kinetic parameters of lithium cadmium borate glasses doped with rare earth ions

    Directory of Open Access Journals (Sweden)

    J. Anjaiah

    2014-10-01

    Full Text Available Thermoluminescence (TL characteristics of X-ray irradiated pure and doped with four different rare earth ions (viz., Pr3+, Nd3+, Sm3+ and Eu3+ Li2O–Cdo–B2O3 glasses have been studied in the temperature range 303–573 K; the pure glass has exhibited single TL peak at 466 K. When this glass is doped with different rare earth ions no additional peaks are observed but the glow peak temperature of the existing glow peak shifted gradually towards higher temperatures with gain in intensity of TL light output. The area under the glow curve is found to be maximum for Eu3+ doped glasses. The trap depth parameters associated with the observed TL peaks have been evaluated using Chen's formulae. The possible use of these glasses in radiation dosimetry has been described. The result clearly showed that europium doped cadmium borate glass has a potential to be considered as the thermoluminescence dosimeter.

  4. Effects of lability of metal complex on free ion measurement using DMT.

    Science.gov (United States)

    Weng, Liping; Van Riemsdijk, Willem H; Temminghoff, Erwin J M

    2010-04-01

    Very low concentrations of free metal ion in natural samples can be measured using the Donnan membrane technique (DMT) based on ion transport kinetics. In this paper, the possible effects of slow dissociation of metal complexes on the interpretation of kinetic DMT are investigated both theoretically and experimentally. The expressions of the lability parameter, Lgrangian , were derived for DMT. Analysis of new experimental studies using synthetic solution containing NTA as the ligand and Cu(2+) ions shows that when the ionic strength is low (DMT measurement. In natural waters, dissolved organic matter (DOM) is the most important source of ligands that complex metals. By comparing the fraction of labile species measured using other dynamic sensors (DGT, GIME) in several freshwaters, it is concluded that in most waters ion transport in DMT is controlled by diffusion in the membrane. Only in very soft waters (DMT. In this case, neglecting this effect may lead to an underestimation of the free metal ion concentration measured.

  5. Sugar-metal ion interactions: the complicated coordination structures of cesium ion with D-ribose and myo-inositol.

    Science.gov (United States)

    Hu, Haijian; Xue, Junhui; Wen, Xiaodong; Li, Weihong; Zhang, Chao; Yang, Limin; Xu, Yizhuang; Zhao, Guozhong; Bu, Xiaoxia; Liu, Kexin; Chen, Jia'er; Wu, Jinguang

    2013-11-18

    The novel cesium chloride-D-ribose complex (CsCl·C5H10O5; Cs-R) and cesium chloride-myo-inositol complex (CsCl·C6H12O6; Cs-I) have been synthesized and characterized using X-ray diffraction and FTIR, FIR, THz, and Raman spectroscopy. Cs(+) is eight-coordinated to three chloride ions, O1 and O2 from one D-ribose molecule, O1 from another D-ribose molecule, and O4 and O5 from the third D-ribose molecule in Cs-R. For one D-ribose molecule, the oxygen atom O1 in the ring is coordinated to two cesium ions as an oxygen bridge, O2 is cocoordinated with O1 to one of the two cesium ions, and O4 and O5 are coordinated to the third cesium ion, respectively. O3 does not coordinate to metal ions and only takes part in forming hydrogen bonds. One chloride ion is connected to three cesium ions. Thus, a complicated structure of Cs-D-ribose forms. For Cs-I, Cs(+) is 10-coordinated to three chloride ions, O1 and O2 from one myo-inositol molecule, O3 and O4 from another myo-inositol molecule, O5 and O6 from the third myo-inositol molecule, and O6 from the fourth myo-inositol molecule. One metal ion is connected to four ligands, and one myo-inositol is coordinated to four Cs(+) ions, which is also a complicated coordination structure. Crystal structure results, FTIR, FIR, THz, and Raman spectra provide detailed information on the structure and coordination of hydroxyl groups to metal ions in the cesium chloride-D-ribose and cesium chloride-myo-inositol complexes.

  6. The efficiency of Amberlite XAD-4 resin loaded with 1-(2-pyridylazo)-2-naphthol in preconcentration and separation of some toxic metal ions by flame atomic absorption spectrometry.

    Science.gov (United States)

    Islam, Aminul; Laskar, Mohammad Asaduddin; Ahmad, Akil

    2011-04-01

    A selective method has been developed for the determination of trace amount of metal ions after preconcentration on 1-(2-pyridylazo)-2-naphthol loaded Amberlite XAD-4 resin. The chelating resin was characterized on the basis of infra red spectra, thermal and chemical stability, and hydrogen ion capacity. High preconcentration factor of 160-400 up to a low preconcentration limit of 10 μg L(-1) has been achieved for almost all the metals. The chelating resin was highly selective even in the presence of large concentrations of alkali and alkaline earth metals and various matrix components. Chromatographic separation of metal ions in binary mixtures has been accomplished. The analytical utility of the resin for metal ions was explored by analyzing natural water and standard reference materials.

  7. Heavy-Ion-Induced Electronic Desorption of Gas from Metals

    CERN Document Server

    Molvik, A W; Mahner, E; Kireeff Covo, M; Bellachioma, M C; Bender, M; Bieniosek, F M; Hedlund, E; Krämer, A; Kwan, J; Malyshev, O B; Prost, L; Seidl, P A; Westenskow, G; Westerberg, L

    2007-01-01

    During heavy-ion operation in several particle accelerators worldwide, dynamic pressure rises of orders of magnitude were triggered by lost beam ions that bombarded the vacuum chamber walls. This ion-induced molecular desorption, observed at CERN, GSI, and BNL, can seriously limit the ion beam lifetime and intensity of the accelerator. From dedicated test stand experiments we have discovered that heavy-ion-induced gas desorption scales with the electronic energy loss (dEe/dx) of the ions slowing down in matter; but it varies only little with the ion impact angle, unlike electronic sputtering.

  8. Heavy-ion induced electronic desorption of gas from metals

    Energy Technology Data Exchange (ETDEWEB)

    Molvik, A W; Kollmus, H; Mahner, E; Covo, M K; Bellachioma, M C; Bender, M; Bieniosek, F M; Hedlund, E; Kramer, A; Kwan, J; Malyshev, O B; Prost, L; Seidl, P A; Westenskow, G; Westerberg, L

    2006-12-19

    During heavy ion operation in several particle accelerators world-wide, dynamic pressure rises of orders of magnitude were triggered by lost beam ions that bombarded the vacuum chamber walls. This ion-induced molecular desorption, observed at CERN, GSI, and BNL, can seriously limit the ion beam lifetime and intensity of the accelerator. From dedicated test stand experiments we have discovered that heavy-ion induced gas desorption scales with the electronic energy loss (dE{sub e}/d/dx) of the ions slowing down in matter; but it varies only little with the ion impact angle, unlike electronic sputtering.

  9. Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

    Indian Academy of Sciences (India)

    A Ravikumar Reddy; K Hussain Reddy

    2003-06-01

    Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.

  10. Electrochemical, optical and metal ion sensing properties of dithizone derivatised electrodes

    CERN Document Server

    Mirkhalaf, F

    1998-01-01

    studied. Possible applications of these modified electrodes with potential control in metal ion detection are described. The electrochemical and SPR responses for the metal ion sensing by the monolayer films were compared with those of polymer films containing the same ligand. Derivatisation of electrode surfaces with ultra-thin films of organic molecules has been extensively studied for many applications in recent years. The present study is based on a new approach in the preparation and use of these electrodes for metal ion sensing. Modification of electrode surfaces with a ligand specific to heavy metal ions has been described. A new derivative of dithizone (DDz) and its secondary metal complexes have been synthesised and attached onto indium tin oxide (ITO) and gold electrodes. This was achieved by covalent bonding between carboxyl groups in DDz and terminal amine groups of molecules self-assembled on the electrode surfaces. These monolayer films were characterised by cyclic voltammetry, by in situ and ex...

  11. Adsorption Mechanisms of Heavy Metal Ions from Drinking Water by Weakly Basic Anion Exchange Resins

    Institute of Scientific and Technical Information of China (English)

    赵璇; 何仕均; 杨磊

    2002-01-01

    Heavy metal micro-contaminants can be removed from water sources technologies. Weakly basic anion exchange resins offer the best ability to remove trace amounts of heavy metals with high selectivity. This paper discusses how weakly basic resins adsorb heavy metals using two different approaches. The removal of mercury, cadmium, and lead ions is based on the fundamental theory of coordination chemistry. The mechanism is not ion exchange but extractive adsorption of heavy metal salts. However, the marked preferential adsorption of chromate by weakly basic anion exchange can be explained using the traditional theory of ion exchange. A lab-scale study produced positive results for the removal of trace amounts of heavy metal ions from drinking water.

  12. Studies on the Transition Metal Ion Induced Fluorescence Enhancement of 1,8-Naphthalimide Derivatives

    Institute of Scientific and Technical Information of China (English)

    WEN,Guo-Tao; ZHU,Man-Zhou; WANG,Zhuo; MENG,Xiang-Ming; HU,Hui-Yuan; GUO,Qing-Xiang

    2006-01-01

    Two fluorosensor systems have been designed and synthesized with their photophysical properties and fluorescence responses toward the transition metal ions studied. The fluorosensor was composed of 1,8-naphthalimide and 4-chloro-1,8-naphthalimide as fluorophore respectively, an amino moiety as the receptor and a hydrocarbon chain as the spacer to link the fluorophore and receptor. Fluorescence intensity of these systems is very weak due to the process of the efficient intramolecular photoinduced electron transfer (PET) in the absence of metal ions. Titration of the transition metal ions can switch on the fluorescence immediately. The intensity of released fluorescence is even higher than the expected from the consideration of the PET in these systems. It may be rationalized that the receptor bound to transition metal ions and the solvation of the fluorophore by the water molecules from the hydrated transition metal salts, may significantly cause fluorescence enhancement.

  13. Metal-Ion Metathesis and Properties of Triarylboron-Functionalized Metal-Organic Frameworks.

    Science.gov (United States)

    Wang, Xiaoqing; Zhang, Liangliang; Yang, Jie; Dai, Fangna; Wang, Rongming; Sun, Daofeng

    2015-07-01

    An anionic metal-organic framework, H3[(Mn4Cl)3L8]⋅30H2O⋅2.5 DMF⋅5 Diox (UPC-15), was successfully prepared by the reaction of MnCl2 with tris(p-carboxylic acid)tridurylborane (H3 L) under solvothermal conditions. UPC-15 with wide-open pores (∼18.8 Å) is constructed by packing of octahedral and cuboctahedral cages, and exhibits high gas-sorption capabilities. Notably, UPC-15 shows selective adsorption of cationic dyes due to the anion framework. Moreover, the catalytic and magnetic properties were investigated, and UPC-15 can highly catalyze the cyanosilylation of aromatic aldehydes. UPC-15 exhibits the exchange of metal ions from Mn to Cu in a single-crystal-to-single-crystal manner to generate UPC-16, which could not be obtained by the direct solvothermal reaction of CuCl2 and H3L. UPC-16 exhibits similar properties for gas sorption, dye separation, and catalytic activity. However, the magnetic behaviors for UPC-15 and UPC-16 are distinct due to the metal-specific properties. Below 47 K, UPC-15 exhibits a ferromagnetic coupling but UPC-16 shows a dominant antiferromagnetic behavior.

  14. Stellar wind interaction and pick-up ion escape of the Kepler-11 "super-Earths"

    Science.gov (United States)

    Kislyakova, Kristina; Johnstone, Colin; Odert, Petra; Erkaev, Nikolai; Lammer, Helmut; Lüftinger, Theresa; Holmstöm, Mats; Khodachenko, Maxim; Güdel, Manuel

    2014-05-01

    We present the results of modeling of the interactions between stellar wind and the extended hydrogen-dominated upper atmospheres of planets and estimate the resulting escape of planetary pick-up ions from the 5 «super-Earths» in the compact Kepler-11 system. We compare the escape rates with the efficiency of the thermal escape of neutral hydrogen atoms. Assuming the stellar wind of Kepler-11 is similar to the solar wind, we used a polytropic 1D hydrodynamic wind model to estimate the wind properties at the planetary orbits. We applied a Direct Simulation Monte Carlo Model to model the hydrogen coronae and the stellar wind plasma interaction around Kepler-11b-f planets within a realistic expected heating efficiency range of 15-40%. The same model was used to estimate the ion pick-up escape from the XUV heated and hydrodynamically extended upper atmospheres of Kepler-11b-f. Modeling clarifies the influence of possible magnetic moments on escape processes and allows to estimate the charge exchange and photoionization production rates of planetary ions as well as the loss rates of pick-up H+ ions for all five planets. This study presents also the comparison of the results between the five 'super-Earths' and in a more general sense also with the thermal escape rates of the neutral planetary hydrogen atoms. Our results show that for all Kepler-11b-f exoplanets, a huge neutral hydrogen corona is formed around the planet. The non-symmetric form of the corona changes from planet to planet and is defined mostly by radiation pressure, charge-exchange and gravitational effects. According to our estimates, nonthermal escape rates of pick-up ionized hydrogen atoms for Kepler-11 «super-Earths» vary between ~ 6.4 × 1030 s-1 and ~ 4.1 × 1031 s-1 depending on the planet's orbital location and assumed heating efficiency. These values correspond to non-thermal mass loss rates of ~ 1.07 × 107 g·s-1 and ~ 6.8 × 107 g·s-1 respectively, which is a few percent of the thermal

  15. Rare earth elements and critical metal content of extracted landfilled material and potential recovery opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Gutiérrez-Gutiérrez, Silvia C.; Coulon, Frédéric; Jiang, Ying; Wagland, Stuart, E-mail: s.t.wagland@cranfield.ac.uk

    2015-08-15

    Highlights: • Samples from multiple core drills were obtained from 4× landfill sites in the UK. • Each sample analysed for rare earth elements, critical metals and valuable metals. • Two stage microwave digestion method ensuring high yield. • High quantities of copper and aluminium were observed in the soil layers of landfill. • Across 4× landfills aluminium and copper present has a value of around $400 million. - Abstract: Rare earth elements (REEs), Platinum group metals (PGMs) and other critical metals currently attract significant interest due to the high risks of supply shortage and substantial impact on the economy. Their uses in many applications have made them present in municipal solid waste (MSW) and in commercial and industrial waste (C&I), since several industrial processes produce by-products with high content of these metals. With over 4000 landfills in the UK alone, the aim of this study was to assess the existence of these critical metals within landfills. Samples collected from four closed landfills in UK were subjected to a two-step acid digestion to extract 27 metals of interest. Concentrations across the four landfill sites were 58 ± 6 mg kg{sup −1} for REEs comprising 44 ± 8 mg kg{sup −1} for light REEs, 11 ± 2 mg kg{sup −1} for heavy REEs and 3 ± 1 mg kg{sup −1} for Scandium (Sc) and 3 ± 1.0 mg kg{sup −1} of PGMs. Compared to the typical concentration in ores, these concentrations are too low to achieve a commercially viable extraction. However, content of other highly valuable metals (Al and Cu) was found in concentrations equating to a combined value across the four landfills of around $400 million, which increases the economic viability of landfill mining. Presence of critical metals will mainly depend on the type of waste that was buried but the recovery of these metals through landfill mining is possible and is economically feasible only if additional materials (plastics, paper, metallic items and other) are

  16. Ion Acceleration at Earth, Saturn and Jupiter and its Global Impact on Magnetospheric Structure

    Science.gov (United States)

    Brandt, Pontus

    2016-07-01

    The ion plasma pressures at Earth, Saturn and Jupiter are significant players in the electrodynamic force-balance that governs the structure and dynamics of these magnetospheres. There are many similarities between the physical mechanisms that are thought to heat the ion plasma to temperatures that even exceed those of the solar corona. In this presentation we compare the ion acceleration mechanisms at the three planetary magnetospheres and discuss their global impacts on magnetopsheric structure. At Earth, bursty-bulk flows, or "bubbles", have been shown to accelerate protons and O+ to high energies by the earthward moving magnetic dipolarization fronts. O+ ions display a more non-adiabatic energization in response to these fronts than protons do as they are energized and transported in to the ring-current region where they reach energies of several 100's keV. We present both in-situ measurements from the NASA Van Allen Probes Mission and global Energetic Neutral (ENA) images from the High-Energy Neutral Atom (HENA) Camera on board the IMAGE Mission, that illustrate these processes. The global impact on the magnetospheric structure is explored by comparing the empirical magnetic field model TS07d for given driving conditions with global plasma pressure distributions derived from the HENA images. At Saturn, quasi-periodic energization events, or large-scale injections, occur beyond about 9 RS around the post-midnight sector, clearly shown by the Ion and Neutral Atom Camera (INCA) on board the Cassini mission. In contrast to Earth, the corotational drift dominates even the energetic ion distributions. The large-scale injections display similar dipolarization front features can be found and there are indications that like at Earth the O+ responds more non-adiabatically than protons do. However, at Saturn there are also differences in that there appears to be energization events deep in the inner magnetosphere (6-9 RS) preferentially occurring in the pre

  17. Interaction between ATP, metal ions, glycine, and several minerals

    Science.gov (United States)

    Rishpon, J.; Ohara, P. J.; Lawless, J. G.; Lahav, N.

    1982-01-01

    Interactions between ATP, glycine and montmorillonite and kaolinite clay minerals in the presence of various metal cations are investigated. The adsorption of adenine nucleotides on clays and Al(OH)3 was measured as a function of pH, and glycine condensation was followed in the presence of ATP, ZnCl2, MgCl2 and either kaolinite or montmorillonite. The amounts of ATP and ADP adsorbed are found to decrease with increasing Ph, and to be considerably enhanced in experiments with Mg(2+)- and Zn(2+)-montmorillonite with respect to Na(+)-montmorillonite. The effects of divalent cations are less marked in kaolinite. Results for Al(OH)3 show the importance of adsorption at clay platelet edges at high pH. The decomposition of ATP during drying at high temperature is observed to be inhibited by small amounts of clay, vacuum, or Mg(2+) or Zn(2+) ions, and to be accompanied by peptide formation in the presence of glycine. Results suggest the importance of Zn(2+) and Mg(2+) in chemical evolution.

  18. Discovery of ions with nuclear charge Z greater than or equal to 9 stability trapped in the earth's radiation belts

    Science.gov (United States)

    Spjeldvik, W. N.; Fritz, T. A.

    1981-01-01

    Observations of MeV heavy ions obtained by Explorer 45 in an equatorial earth orbit during a 7 month period in 1972 are presented, including data from four major magnetic storms. The spacecraft contained a heavy ion detector telescope and heavy ion discriminator electronics. Heavy ions were distinguished from protons and electrons, and He ions and ions heavier than F were recorded on separate data channels. The L equals 2.25 to L equals 4 zones were probed, and it was found that the relative enhancement in heavy ion fluxes in the radiation belts over the prestorm ion flux intensities tends to increase with increasing ion mass and/or increasing ion energy in the MeV range. The radial profiles of ions with nucleon number greater than nine peak at L equals 2.9, and MeV ions in this class decay on time scales from 23 days at L equals 3.25 to 55 days at L equals 2.25. Indirect evidence indicated a solar source for the very heavy ions in the magnetosphere.

  19. Determination of metal ions by fluorescence anisotropy exhibits a broad dynamic range

    Science.gov (United States)

    Thompson, Richard B.; Maliwal, Badri P.; Fierke, Carol A.

    1998-05-01

    Recently, we have shown that metal ions free in solution may be determined at low levels by fluorescence anisotropy (polarization) measurements. Anisotropy measurements enjoy the advantages of wavelength ratiometric techniques for determining metal ions such as calcium, because anisotropy measurements are ratiometric as well. Furthermore, fluorescence anisotropy may be imaged in the microscope. An advantage of anisotropy not demonstrated for wavelength ratiometric approaches using indicators such as Fura-2 and Indo-1 is that under favorable circumstances anisotropy-based determinations exhibit a much broader dynamic range in metal ion concentration. Determinations of free Zn(II) in the picomolar range are demonstrated.

  20. In vitro corrosion behaviour and metallic ion release of different prosthodontic alloys.

    Science.gov (United States)

    Gil, F J; Sánchez, L A; Espías, A; Planell, J A

    1999-12-01

    The corrosion resistance for six metallic alloys often used in clinical dentistry, was evaluated by measuring their polarisation resistance in an artificial saliva environment. The critical current density (icr), the passive current density (ip), the corrosion potential (Ecorr) and the critical pitting potential (Ecp), were studied. Metallic ion release from the different alloys was analysed in a saliva environment at 37 degrees C. The nickel-chromium alloy exhibited important corrosion and a high quantity of ions was released. The titanium presented a low value of ion release and a good corrosion resistance due to the passive film on the metal surface. The high gold content alloy provided the best corrosion resistance.

  1. Metal ion concentrations in body fluids after implantation of hip replacements with metal-on-metal bearing--systematic review of clinical and epidemiological studies.

    Directory of Open Access Journals (Sweden)

    Albrecht Hartmann

    Full Text Available INTRODUCTION: The use of metal-on-metal (MoM total hip arthroplasty (THA increased in the last decades. A release of metal products (i.e. particles, ions, metallo-organic compounds in these implants may cause local and/or systemic adverse reactions. Metal ion concentrations in body fluids are surrogate measures of metal exposure. OBJECTIVE: To systematically summarize and critically appraise published studies concerning metal ion concentrations after MoM THA. METHODS: Systematic review of clinical trials (RCTs and epidemiological studies with assessment of metal ion levels (cobalt, chromium, titanium, nickel, molybdenum in body fluids after implantation of metalliferous hip replacements. Systematic search in PubMed and Embase in January 2012 supplemented by hand search. Standardized abstraction of pre- and postoperative metal ion concentrations stratified by type of bearing (primary explanatory factor, patient characteristics as well as study quality characteristics (secondary explanatory factors. RESULTS: Overall, 104 studies (11 RCTs, 93 epidemiological studies totaling 9.957 patients with measurement of metal ions in body fluids were identified and analyzed. Consistently, median metal ion concentrations were persistently elevated after implantation of MoM-bearings in all investigated mediums (whole blood, serum, plasma, erythrocytes, urine irrespective of patient characteristics and study characteristics. In several studies very high serum cobalt concentrations above 50 µg/L were measured (detection limit typically 0.3 µg/L. Highest metal ion concentrations were observed after treatment with stemmed large-head MoM-implants and hip resurfacing arthroplasty. DISCUSSION: Due to the risk of local and systemic accumulation of metallic products after treatment with MoM-bearing, risk and benefits should be carefully balanced preoperatively. The authors support a proposed "time out" for stemmed large-head MoM-THA and recommend a restricted

  2. Metal-silicate Partitioning and Its Role in Core Formation and Composition on Super-Earths

    Science.gov (United States)

    Schaefer, Laura; Jacobsen, Stein B.; Remo, John L.; Petaev, M. I.; Sasselov, Dimitar D.

    2017-02-01

    We use a thermodynamic framework for silicate-metal partitioning to determine the possible compositions of metallic cores on super-Earths. We compare results using literature values of the partition coefficients of Si and Ni, as well as new partition coefficients calculated using results from laser shock-induced melting of powdered metal-dunite targets at pressures up to 276 GPa, which approaches those found within the deep mantles of super-Earths. We find that larger planets may have little to no light elements in their cores because the Si partition coefficient decreases at high pressures. The planet mass at which this occurs will depend on the metal-silicate equilibration depth. We also extrapolate the equations of state (EOS) of FeO and FeSi alloys to high pressures, and present mass–radius diagrams using self-consistent planet compositions assuming equilibrated mantles and cores. We confirm the results of previous studies that the distribution of elements between mantle and core will not be detectable from mass and radius measurements alone. While observations may be insensitive to interior structure, further modeling is sensitive to compositionally dependent properties, such as mantle viscosity and core freeze-out properties. We therefore emphasize the need for additional high pressure measurements of partitioning as well as EOSs, and highlight the utility of the Sandia Z-facilities for this type of work.

  3. Sono-electrochemical recovery of metal ions from their aqueous solutions.

    Science.gov (United States)

    Dong, Bingfeng; Fishgold, Asher; Lee, Paul; Runge, Keith; Deymier, Pierre; Keswani, Manish

    2016-11-15

    Metal recovery from aqueous waste streams is an important goal for recycling, agriculture and mining industries. The development of more effective methods of recovery have been of increasing interest. The most common methods for metal recovery include precipitation, electrochemical, ion exchange, flocculation/coagulation and filtration. In the current work, a sono-electrochemical technique employing sound field at megasonic frequency (500kHz or 1MHz) in conjunction with electrochemistry is evaluated for enhanced recovery of selected metal ions (palladium, lead and gallium) with different redox potentials from their aqueous solutions. The surface morphology and elemental composition of the metal deposits were characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The percent recovery was found to depend on the type of metal ion and the megasonic frequency used. Palladium was recovered in its metal form, while lead and gallium were oxidized during or after the recovery process.

  4. Laser ion acceleration from a double-layer metal foil

    Energy Technology Data Exchange (ETDEWEB)

    Lecz, Zsolt

    2013-11-12

    The laser-ion acceleration with ultra-intense and ultra-short laser pulses has opened a new field of accelerator physics over the last decade. Fast development in laser systems are capable of delivering short pulses of a duration of a few hundred femtoseconds at intensities between 10{sup 18}-10{sup 20} W/cm{sup 2}. At these high intensities the laser-matter interaction induces strong charge separation, which leads to electric fields exceeding the acceleration gradients of conventional devices by 6 orders of magnitude. The particle dynamics and energy absorption of the laser pulse can be understood by means of high-performance simulation tools. In the framework of the LIGHT (Laser Ion Generation, Handling and Transport) project our goal is to provide an analytical description of the 3D distribution of the protons accelerated via TNSA (Target Normal Sheath Acceleration). In this acceleration mechanism the short pulse impinging on a metal foil heats the electrons to relativistic energies, which triggers the strong charge separation field on the opposite target surface (Debye-sheath). The accelerated light ions (proton, carbon, oxygen) observed in the experiments originate from the contamination layer deposited on the surface. The thickness of this layer in the experiments is not known exactly. According to our study these ions can be accelerated in three different regimes depending on layer thickness: quasi-static acceleration (QSA, for thin layers), plasma expansion (for thick layers) and a not well understood intermediate (or combined) regime. In a laser-plasma simulations time-dependent hot electron density and temperature are observed, therefore we performed plasma simulations with a well defined and constant initial hot electron distribution. Thus the simulation results are easier to compare with analytical models. In our case the theoretical investigation of the TNSA involves the understanding of the charge separation effects at the surface of a two

  5. Negative ions in liquid helium

    Science.gov (United States)

    Khrapak, A. G.; Schmidt, W. F.

    2011-05-01

    The structure of negative ions in liquid 4He is analyzed. The possibility of cluster or bubble formation around impurity ions of both signs is discussed. It is shown that in superfluid helium, bubbles form around negative alkaline earth metal ions and clusters form around halogen ions. The nature of "fast" and "exotic" negative ions is also discussed. It is assumed that "fast" ions are negative ions of helium excimer molecules localized inside bubbles. "Exotic" ions are stable negative impurity ions, which are always present in small amounts in gas discharge plasmas. Bubbles or clusters with radii smaller the radius of electron bubbles develop around these ions.

  6. Thermodynamic Investigation of the Reduction-Distillation Process for Rare Earth Metals Production

    Science.gov (United States)

    Judge, W. D.; Azimi, G.

    2017-08-01

    Owing to their high vapor pressure, the four rare earth metals samarium, europium, thulium, and ytterbium are produced by reduction-distillation whereby their oxides are reduced with metallic lanthanum in vacuo, and the produced metal is subsequently vaporized off. Here, we performed a thorough thermodynamic investigation to establish a fundamental understanding of the reduction-distillation process. Thermodynamic functions including vapor pressures, Gibbs free energies, and enthalpies of reaction were calculated and compared with available experimental data. Furthermore, the kinetics of the process was explored and theoretical evaporation rates were calculated from thermodynamic data. The thermodynamic model developed in this work can help optimize processing conditions to maximize the yield and improve the overall process.

  7. Thermodynamic Investigation of the Reduction-Distillation Process for Rare Earth Metals Production

    Science.gov (United States)

    Judge, W. D.; Azimi, G.

    2017-10-01

    Owing to their high vapor pressure, the four rare earth metals samarium, europium, thulium, and ytterbium are produced by reduction-distillation whereby their oxides are reduced with metallic lanthanum in vacuo, and the produced metal is subsequently vaporized off. Here, we performed a thorough thermodynamic investigation to establish a fundamental understanding of the reduction-distillation process. Thermodynamic functions including vapor pressures, Gibbs free energies, and enthalpies of reaction were calculated and compared with available experimental data. Furthermore, the kinetics of the process was explored and theoretical evaporation rates were calculated from thermodynamic data. The thermodynamic model developed in this work can help optimize processing conditions to maximize the yield and improve the overall process.

  8. Significant FRET between SWNT/DNA and rare earth ions: a signature of their spatial correlations.

    Science.gov (United States)

    Ignatova, Tetyana; Najafov, Hikmat; Ryasnyanskiy, Aleksandr; Biaggio, Ivan; Zheng, Ming; Rotkin, Slava V

    2011-07-26

    Significant acceleration of the photoluminescence (PL) decay rate was observed in water solutions of two rare earth ions (REIs), Tb and Eu. We propose that the time-resolved PL spectroscopy data are explained by a fluorescence resonance energy transfer (FRET) between the REIs. FRET was directly confirmed by detecting the induced PL of the energy acceptor, Eu ion, under the PL excitation of the donor ion, Tb, with FRET efficiency reaching 7% in the most saturated solution, where the distance between the unlike REIs is the shortest. Using this as a calibration experiment, a comparable FRET was measured in the mixed solution of REIs with single-wall nanotubes (SWNTs) wrapped with DNA. From the FRET efficiency of 10% and 7% for Tb and Eu, respectively, the characteristic distance between the REI and SWNT/DNA was obtained as 15.9 ± 1.3 Å, suggesting that the complexes are formed because of Coulomb attraction between the REI and the ionized phosphate groups of the DNA.

  9. Stellar wind interaction and pick-up ion escape of the Kepler-11 "super-Earths"

    CERN Document Server

    Kislyakova, K G; Odert, P; Erkaev, N V; Lammer, H; üftinger, T L; Holmström, M; Khodachenko, M L; üdel, M G

    2013-01-01

    We study the interactions between stellar wind and the extended hydrogen-dominated upper atmospheres of planets and the resulting escape of planetary pick-up ions from the 5 "super-Earths" in the compact Kepler-11 system and compare the escape rates with the efficiency of the thermal escape of neutral hydrogen atoms. Assuming the stellar wind of Kepler-11 is similar to the solar wind, we use a polytropic 1D hydrodynamic wind model to estimate the wind properties at the planetary orbits. We apply a Direct Simulation Monte Carlo Model to model the hydrogen coronae and the stellar wind plasma interaction around Kepler-11b-f within a realistic expected heating efficiency range of 15-40%. The same model is used to estimate the ion pick-up escape from the XUV heated and hydrodynamically extended upper atmospheres of Kepler-11b-f. From the interaction model we study the influence of possible magnetic moments, calculate the charge exchange and photoionization production rates of planetary ions and estimate the loss r...

  10. Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

    Directory of Open Access Journals (Sweden)

    M. Opiela

    2012-04-01

    Full Text Available The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and a realization of metallurgical process in vacuous conditions result in a low concentration of sulfur (0.004%, phosphorus (from 0.006 to 0.008% and oxygen (6 ppm. The high metallurgical purity is confirmed by a small fraction of non-metallic inclusions averaging 0.075%. A large majority of non-metallic inclusions are fine, globular oxide-sulfide or sulfide particles with a mean size 17m2. The chemical composition and morphology of non-metallic inclusions was modified by Ce, La and Nd, what results a small deformability of non- metallic inclusions during hot-working.

  11. Improvement of corrosion resistance of magnesium metal by rare earth elements

    Energy Technology Data Exchange (ETDEWEB)

    Takenaka, Toshihide [Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi 441-8580 (Japan)], E-mail: takenaka@pse.tut.ac.jp; Ono, Takami; Narazaki, Yuji; Naka, Yusuke; Kawakami, Masahiro [Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi 441-8580 (Japan)

    2007-11-20

    Mg metal containing rare earth metals (REs) can be electrowon directly by molten salt electrolysis. The clarification of the optimum RE content in Mg is necessary to fix the electrolytic conditions in the direct electrowinning of Mg with RE. From this point of view, effect of RE addition in Mg metal on its corrosion property was studied in detail in this study. The specimen was prepared by adding La, Nd, or Ce in melted Mg metal, and its corrosion resistance was examined by an immersion test in 3 mass%-NaCl solution at room temperature. The corrosion resistance of Mg was improved greatly by adding a small amount of RE, whereas the excess addition of RE deteriorated the corrosion resistance. The optimum RE content was about 0.5 mass%. In this study, the corrosion property of Mg with an artificial surface oxide layer was also studied to clarify the effect of surface oxide. The corrosion resistance of Mg was particularly strengthened by conversion coating in a solution including La(NO{sub 3}){sub 3}, Nd(NO{sub 3}){sub 3}, or Ce(NO{sub 3}){sub 3}, with Mg(NO{sub 3}){sub 2}. This result suggests that the surface oxide film consisting of both Mg and RE gives ideal corrosion resistance to Mg metal. Mg metal with conversion coating including RE should also be of use as a corrosion-resistant material.

  12. How Does Boiling in the Earth's Crust Influence Metal Speciation and Transport?

    Science.gov (United States)

    Kam, K.; Lemke, K.

    2014-12-01

    The presence of large quantities of precious metals, such as gold and copper, near the Earth's surface (upper crust) is commonly attributed to transport in aqueous solution and precipitation upon variations in temperature and pressure. As a consequence, gold exploration is closely linked to solution chemistry, i.e. hydrothermal processes involving aqueous fluids with densities of around unity. However, as crustal fluids buoyantly ascend, boiling produces a coexisting low-density aqueous liquid with fundamentally different physical and chemical properties, and a, most importantly, a high affinity for coinage metals (Heinrich et al., Econ Geol., 1992, 87, 1566). From recent experimental studies of Au (Hurtig and Williams-Jones, 2014, Geochim. Cosmochim. Acta,, 127, 304), we know that metal speciation in this low-density phase differs fundamentally from that observed in bulk solution, clearly, with important implications for Au, and metal speciation in general, transport and ore concentrations processes (these processes would also be operable in industrial geothermal plants given the quite special solvent properties of steam). In brief, this study focuses on the speciation of select metal halides in bulk solution as well as in water vapor, and is driven by our need to understand the solvent properties of around 2.0x109 cubic kilometers of free water (or 2,500 times as much water as stored in all lakes and rivers) present in the Earth's crust. The scope of this study has particular applications in the geothermal and oil industries, as both deal with high temperature low-density aqueous fluids. Understanding how metal halide species behave upon boiling can also provide insight into how metals, such as copper and silver, coat turbine equipment and steam piping in geothermal plants, ultimately rendering these components inoperable. This study will also provide preliminary results from mass spectrometric experiments of transition metal halides, and will be augmented with

  13. Identification of low-frequency kinetic wave modes in the Earth's ion foreshock

    Directory of Open Access Journals (Sweden)

    X. Blanco-Cano

    Full Text Available In this work we use ion and magnetic field data from the AMPTE-UKS mission to study the characteristics of low frequency (ωr « Ωp waves observed upstream of the Earth's bow shock. We test the application of various plasma-field correlations and magnetic ratios derived from linear Vlasov theory to identify the modes in this region. We evaluate (for a parameter space consistent with the ion foreshock the Alfvén ratio, the parallel compressibility, the cross-helicity, the noncoplanar ratio, the magnetic compression and the polarization for the two kinetic instabilities that can be generated in the foreshock by the interaction of hot diffuse ions with the solar wind: the left-hand resonant and the right-hand resonant ion beam instabilities. Comparison of these quantities with the observed plasma-field correlations and various magnetic properties of the waves observed during 10 intervals on 30 October 1984, where the waves are associated with diffuse ions, allows us to identify regions with Alfvénic waves and regions where the predominant mode is the right-hand resonant instability. In all the cases the waves are transverse, propagating at angles ≤ 33° and are elliptically polarized. Our results suggest that while the observed Alfvén waves are generated locally by hot diffuse ions, the right-handed waves may result from the superposition of waves generated by two different types of beam distribution (i.e. cold beam and diffuse ions. Even when there was good agreement between the values of observed transport ratios and the values given by the theory, some discrepancies were found. This shows that the observed waves are different from the theoretical modes and that mode identification based only on polarization quantities does not give a complete picture of the waves' characteristics and can lead to mode identification of waves whose polarization may agree with theoretical predictions even when

  14. Recovery of rare earths from acid leach solutions of spent nickel-metal hydride batteries using solvent extraction

    Institute of Scientific and Technical Information of China (English)

    夏允; 肖连生; 田吉英; 李兆洋; 曾理

    2015-01-01

    The extraction of rare earths from acid leach solutions of spent nickel-metal hydride batteries using a primary amine ex-tractant of N1923 was studied. The effects of feed pH, temperature, agitation rate and time on the extraction of rare earths, as well as stripping agent composition and concentration, phase ratio on the stripping were investigated. In addition, the extraction isotherm was determined. The pilot plant test results showed that the extraction of rare earths reached 99.98% after a five-stage counter current ex-traction. The mixed rare earths oxalates with the 99.77% purity of rare earth elements and impurity content less than 0.05% were ob-tained by the addition of oxalic acids in loaded strip liquors. The extractant exhibited good selectivity of rare earths over base metals of iron, nickel, copper and manganese.

  15. A Study on the Fixed-bed Adsorption of Heavy Metal Ions over Chitosan Bead

    Energy Technology Data Exchange (ETDEWEB)

    Chung, K.H. [Department of Petrochemical Engineering, Hanlyo University, Chonnam (Korea)

    1999-02-01

    Fixed-bed adsorption of metal ions on chitosan bead was studied to remove heavy metal ions in waste water. Chitin was extracted from crab shell and chitosan was prepared by deacetylation of the chitin. The chitosan in bead was used as an adsorbent for heavy metal ions. Freundlich and Langmuir isotherm was determined from the experimental results of equilibrium adsorption for individual metal ion (Cu{sup 2+}, Co{sup 2+}, Ni{sup 2+}) on chitosan bead. Adsorption strength of metal ions decreased in the order of Cu{sup 2+}>Co{sup 2+}>Ni{sup 2+} ion. Breakthrough curves of single and multicomponent adsorption for metal ions were obtained from the experimental results of fixed-bed adsorption. The breakthrough curves were analyzed by simulation with fixed-bed adsorption equation based on LDFA (linear driving force approximation) adopted LAS (ideal adsorbed solution) theory which can predict multi-component adsorption isotherm from individual adsorption isotherm. The behavior of fixed bed adsorption for single and multi-component system could be nicely simulated by the equation. 22 refs., 10 figs., 2 tabs.

  16. The two distinctive metal ion binding domains of the wheat metallothionein Ec-1.

    Science.gov (United States)

    Peroza, Estevão A; Kaabi, Ali Al; Meyer-Klaucke, Wolfram; Wellenreuther, Gerd; Freisinger, Eva

    2009-03-01

    Metallothioneins are small cysteine-rich proteins believed to play a role, among others, in the homeostasis of essential metal ions such as Zn(II) and Cu(I). Recently, we could show that wheat E(c)-1 is coordinating its six Zn(II) ions in form of metal-thiolate clusters analogously to the vertebrate metallothioneins. Specifically, two Zn(II) ions are bound in the N-terminal and four in the C-terminal domain. In the following, we will present evidence for the relative independence of the two domains from each other with respect to their metal ion binding abilities, and uncover three intriguing peculiarities of the protein. Firstly, one Zn(II) ion of the N-terminal domain is relative resistant to complete replacement with Cd(II) indicating the presence of a Zn(II)-binding site with increased stability. Secondly, the C-terminal domain is able to coordinate an additional fifth metal ion, though with reduced affinity, which went undetected so far. Finally, reconstitution of apoE(c)-1 with an excess of Zn(II) shows a certain amount of sub-stoichiometrically metal-loaded species. The possible relevance of these finding for the proposed biological functions of wheat E(c)-1 will be discussed. In addition, extended X-ray absorption fine structure (EXAFS) measurements on both, the full-length and the truncated protein, provide final evidence for His participation in metal ion binding.

  17. Influence of rare earth metals on the nucleation and solidification behavior of iron and 1045 steel

    Science.gov (United States)

    Li, H.; McLean, A.; Rutter, J. W.; Sommerville, I. D.

    1988-06-01

    Two series of experiments have been conducted to determine the influence of rare earth additions on the nucleation and crystallization behavior of pure iron and 1045 steel. In the first series, additions of rare earth suicide or cerium dioxide powder to two-Kg 1045 steel ingots indicated that rare earth suicide can refine the as-cast structure of such ingots. However, if the holding time after rare earth silicide addition is over two minutes, the grain refinement decreases. With cerium dioxide additions, a relatively large columnar zone was obtained. In the second series, the effects of cerium metal or cerium dioxide powder additions on the degree of undercooling obtainable in pure iron and 1045 steel were examined by the lévitation melting method. Surface tension measurements of the levitated droplets were carried out at the same time to investigate the possible effects of surface tension variations on the nucleation and crystallization behavior of the metals. The experimental data show that rare earth inclusions can greatly reduce the degree of undercooling of iron and steel, and that a small amount of dissolved cerium can further reduce the degree of undercooling of levitated droplets. The structure and reaction products obtained with Fe-Ce levitated droplets were examined with both optical and scanning electron microscopy as well as X-ray diffraction analysis. The experimental results clearly indicated that cerium solute redistribution during solidification is the dominant factor in refining the as-cast structure. A nucleation and solidification model for the Fe-Ce levitated droplets has been developed, which can successfully explain the experimental results.

  18. Thin-layer chromatographie separation of alkaline earth metals on diethylaminoethyl cellulose.

    Science.gov (United States)

    Ishida, K

    1969-12-01

    Thin-layer Chromatographic behaviour of magnesium, calcium, strontium and barium on diethylaminoethyl cellulose has been investigated in methanol-nitric acid mixtures. R(f) values are in the order magnesium > calcium > strontium > barium. The differences in R(f) values are large enough to allow good separations of the four metal ions from each other. The best separation is obtained by the ascending technique with methanol-8M nitric acid (20:1, v v ).

  19. Impact Wear Properties of Metal-Plastic Multilayer Composites Filled with Glass Fiber Treated with Rare Earth Element Surface Modifier

    Institute of Scientific and Technical Information of China (English)

    程先华; 薛玉君

    2001-01-01

    The friction and wear properties of metal-plastic multilayer composites filled with glass fiber, which is treated with rare earth element surface modifier, under impact load and dry friction conditions were investigated. Experimental results show that the metal-plastic multilayer composite filled with glass fiber exhibits excellent friction and impact wear properties when using rare earth elements as surface modifier for the surface treatment of glass fiber.

  20. Electrochemical preparation of metal microstructures on large areas of etched ion track membranes

    Science.gov (United States)

    Dobrev, D.; Vetter, J.; Angert, N.

    1999-01-01

    A microgalvanic method for metal filling of etched ion tracks in organic foils on large areas is described. The method and the used galvanic cell permit the deposition of stable standing individual metal whiskers with high aspect ratio and a density of 10 5-10 8 per cm 2 on an area of 12.5 cm 2. The method was verified with copper and it is suitable also for various other metals. It can be applied for the replication of etched ion tracks and for the fabrication of microstructures containing large numbers of individual metal whiskers.

  1. Process for carbonaceous material conversion and recovery of alkali metal catalyst constituents held by ion exchange sites in conversion residue

    Science.gov (United States)

    Sharp, David W.

    1980-01-01

    In a coal gasification operation or similar conversion process carried out in the presence of an alkali metal-containing catalyst wherein solid particles containing alkali metal residues are produced, alkali metal constituents are recovered for the particles by contacting or washing them with an aqueous solution containing calcium or magnesium ions in an alkali metal recovery zone at a low temperature, preferably below about 249.degree. F. During the washing or leaching process, the calcium or magnesium ions displace alkali metal ions held by ion exchange sites in the particles thereby liberating the ions and producing an aqueous effluent containing alkali metal constituents. The aqueous effluent from the alkali metal recovery zone is then recycled to the conversion process where the alkali metal constituents serve as at least a portion of the alkali metal constituents which comprise the alkali metal-containing catalyst.

  2. Effect of Metal Ions on the Formation of Trichloronitromethane during Chlorination of Catechol and Nitrite.

    Science.gov (United States)

    Gan, Guojuan; Mei, Rongwu; Qiu, Lin; Hong, Huachang; Wang, Qingjun; Mazumder, Asit; Wu, Shikai; Pan, Xiangliang; Liang, Yan

    2016-11-01

    Catechol, nitrite, and dissolved metals are ubiquitous in source drinking water. Catechol and nitrite have been identified as precursors for halonitromethanes (HNMs), but the effect of metal ions on HNM formation during chlorination remains unclear. The main objective of this study was to investigate the effect of metal ions (Fe, Ti, Al) on the formation of trichloronitromethane (TCNM) (the most representative HNM species in disinfected water) on chlorinating catechol and nitrite. Trichloronitromethane was extracted by methyl tert-butyl ether and detected by gas chromatography. The results show that metal ions promoted the formation of TCNM and that the enhancement efficiency followed the order of Fe > Ti > Al. Trichloronitromethane formation increased greatly within 2 h, and a basic condition (pH 8-9) favored TCNM formation more than acidic or neutral conditions. The conjoint effect of the metal-ion mixtures was shown to be similar to that of the single metal ion having the highest promoting effect on TCNM formation. Our results strongly suggest that metal ions play a significant role in enhancing TCNM formation.

  3. Synthesis and Photocatalytic Activity of TiO2/V2O5 Composite Catalyst Doped with Rare Earth Ions

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    TiO2/V2O5 catalyst doped with rare earth ions was prepared by sol-gel method. Titanium tetrapropoxide and vanadium pentoxide were used as precursor of the composite catalyst and rare earth ions were used as dopant. The crystal phases, crystalline sizes, microstructure, absorption spectra of doped composite catalyst were studied by XRD, EDS, FT-IR and UV-Vis. Photoactivity of the prepared catalyst under ultraviolet irradiation were evaluated by degradation of methyl orange (MO) in aqueous solution. It is shown that the prepared catalyst is composed of anatase and rutile. The rare earth ions are highly dispersed in composite catalyst. All the doped catalysts appear higher photocatalytic activity than TiO2/V2O5 catalyst and catalyst doped with Ce4+ present the best activity to MO.

  4. Extent of metal-silicate disequilibrium during accretion and early differentiation of the Earth

    Science.gov (United States)

    Rubie, D. C.; Nimmo, F.; Morbidelli, A.; Frost, D. J.

    2012-12-01

    Earth, Mars, Venus and Mercury accreted on a timescale of 10-100 My through a series of violent collisions with planetesimals and embryos. The high energy of such impacts was sufficient to cause deep magma ocean formation which facilitated the segregation of metal and silicate liquids. Planetary cores thus formed as a multistage process that was inseparable from the accretion process. In order to better understand the formation and early differentiation of the terrestrial planets, we are integrating a multistage core-formation model with N-body accretion simulations. Constraints on model parameters are the compositions of the Earth's primitive mantle and, to a lesser extent, the mantles of Mars and Mercury which may be FeO rich and FeO-poor respectively. We use a least-squares minimization to optimise 4 model parameters. Elements currently considered include Si, O, Ni, Co, W, Nb, Cr, Ta and V. We concentrate on recent N-body simulations that result in an approximately Earth-mass planet at ~1 AU. In order to satisfy the model constraints, accretion has to be heterogeneous, with embryos and planetesimals originating in the inner part of the solar system (e.g. emulsify and equilibrate in a magma ocean and (2) the fraction of magma oceans that are involved in the equilibration process for both impacting planetesimals and embryos. Both estimates are crucial for interpreting Hf-W age determinations. Best results are obtained when the fraction of silicate mantle/magma ocean that interacts chemically with the metallic cores of impactors is limited and lies in the range 0.003 to 0.1, depending on the size of the impactor and magma ocean depth. The degree of incomplete metal equilibration depends on the extent to which the impactor's mantle participates in the metal-silicate equilibration process.

  5. Spectroscopic analyses of trivalent rare-earth ions doped in different host materials

    Science.gov (United States)

    Chandrasekharan, Sreerenjini

    2011-12-01

    Trivalent rare-earth (RE3+) ions of 4f n electronic configurations are found to possess potential applications in the field of optoelectronic and biophotonic technologies owing to their unique optical properties. They have been used as optical activators in a large number of solid-state laser host materials due to their rich energy level structure. This work focuses on the spectroscopic study of two RE 3+ ions, namely, trivalent erbium and neodymium (Er3+ and Nd3+, respectively), embedded in some important single crystal and nanocrystalline host materials including yttrium orthoaluminate (YAlO3), erbium oxide (Er2O3), yttrium oxide (Y2O3) and a combined host system of Y2O 3 and a vinyl polymer named Polymethyl Methacrylate (PMMA). Each one of these host materials are known to be unique for their characteristic properties such as chemical durability, thermal stability, optical clarity, wide band gaps, biocompatibility, and success as phosphors in various optoelectronic devices. The complete material characterization has been performed through morphology analyses using advanced microscopy techniques and spectroscopic analyses of the characteristic absorption and emission spectra by applying phenomenological crystal-field splitting and Judd-Ofelt techniques. The important spectroscopic parameters such as line strengths, radiative decay rates, and branching ratios have been obtained for the intermanifold transitions from the upper multiplets to the corresponding lower-lying multiplet manifolds 2S+1LJ of RE3+ ions doped in various host systems. Using the radiative decay rates, radiative life times are obtained and the experimental analyses of the fluorescent spectra yield the measured lifetimes of emitting metastable states. Finally, the results are compared with the previously published set of values for the same ions doped in similar type of host systems. Detailed analyses of the spectroscopic properties show that the studied systems RE3+ doped single crystals and

  6. Earth

    CERN Document Server

    Carter, Jason

    2017-01-01

    This curriculum-based, easy-to-follow book teaches young readers about Earth as one of the eight planets in our solar system in astronomical terms. With accessible text, it provides the fundamental information any student needs to begin their studies in astronomy, such as how Earth spins and revolves around the Sun, why it's uniquely suitable for life, its physical features, atmosphere, biosphere, moon, its past, future, and more. To enhance the learning experience, many of the images come directly from NASA. This straightforward title offers the fundamental information any student needs to sp

  7. High-pressure phase transitions in rare earth metal thulium to 195 GPa.

    Science.gov (United States)

    Montgomery, Jeffrey M; Samudrala, Gopi K; Tsoi, Georgiy M; Vohra, Yogesh K

    2011-04-20

    We have performed image plate x-ray diffraction studies on a heavy rare earth metal, thulium (Tm), in a diamond anvil cell to a pressure of 195 GPa and volume compression V/V₀ = 0.38 at room temperature. The rare earth crystal structure sequence, hcp →Sm-type→ dhcp →fcc → distorted fcc, is observed in Tm below 70 GPa with the exception of a pure fcc phase. The focus of our study is on the ultrahigh-pressure phase transition and Rietveld refinement of crystal structures in the pressure range between 70 and 195 GPa. The hexagonal hR-24 phase is seen to describe the distorted fcc phase between 70 and 124 GPa. Above 124 ± 4 GPa, a structural transformation from hR 24 phase to a monoclinic C 2/m phase is observed with a volume change of -1.5%. The equation of state data shows rapid stiffening above the phase transition at 124 GPa and is indicative of participation of f-electrons in bonding. We compare the behavior of Tm to other heavy rare-earths and heavy actinide metals under extreme conditions of pressure.

  8. The atmospheric circulation of the super Earth GJ 1214b: Dependence on composition and metallicity

    CERN Document Server

    Kataria, Tiffany; Fortney, Jonathan J; Marley, Mark S; Freedman, Richard S

    2014-01-01

    We present three-dimensional atmospheric circulation models of GJ 1214b, a 2.7 Earth-radius, 6.5 Earth-mass super Earth detected by the MEarth survey. Here we explore the planet's circulation as a function of atmospheric metallicity and atmospheric composition, modeling atmospheres with a low mean-molecular weight (i.e., H2-dominated) and a high mean-molecular weight (i.e. water- and CO2-dominated). We find that atmospheres with a low mean-molecular weight have strong day-night temperature variations at pressures above the infrared photosphere that lead to equatorial superrotation. For these atmospheres, the enhancement of atmospheric opacities with increasing metallicity lead to shallower atmospheric heating, larger day-night temperature variations and hence stronger superrotation. In comparison, atmospheres with a high mean-molecular weight have larger day-night and equator-to-pole temperature variations than low mean-molecular weight atmospheres, but differences in opacity structure and energy budget lead ...

  9. Effect of metal ions on the growth and metabolites production of ...

    African Journals Online (AJOL)

    Administrator

    2011-09-26

    Sep 26, 2011 ... The effects of several metal ions on the cell growth, production of polysaccharides by ... in vegetarian diets and regarded as medicinal food that ... Many factors including nutrition ... in submerged fermentation is relatively poor.

  10. Non-centrosymmetric behavior of a clay film ion-exchanged with chiral metal complexes.

    Science.gov (United States)

    Suzuki, Yasutaka; Matsunaga, Ryoya; Sato, Hisako; Kogure, Toshihiro; Yamagishi, Akihiko; Kawamata, Jun

    2009-12-07

    SHG measurements on a highly transparent clay film ion-exchanged with chiral metal complexes revealed that the mono-molecular layer of the chiral complexes in an interlayer space acquired a non-centrosymmetric character.

  11. Photodetachment of negative ion in a gradient electric field near a metal surface

    Institute of Scientific and Technical Information of China (English)

    Liu Tian-Qi; Wang De-Hun; Han Cai; Liu Jiang; Liang Dong-Qi; Xie Si-Cheng

    2012-01-01

    Based on closed-orbit theory,the photodetachment of Hˉ in a gradient electric field near a metal surface is studied.It is demonstrated that the gradient electric field has a significant influence on the photodetachment of negative ions near a metal surface.With the increase of the gradient of the electric field,the oscillation in the photodetachment cross section becomes strengthened.Besides,in contrast to the photodetachment of Hˉ near a metal surface in a uniform electric field,the oscillating amplitude and the oscillating region in the cross section of a gradient electric field also become enlarged.Therefore,we can use the gradient electric field to control the photodetachment of negative ions near a metal surface.We hope that our results will be useful for understanding the photodetachment of negative ions in the vicinity of surfaces,cavities,and ion traps.

  12. Growth of cyanophage N-1 under the influence of heavy metal ions.

    Science.gov (United States)

    Sarma, T A; Kaur, Sukhrish P

    2005-01-01

    The growth of cyanophage N-1 in the cyanobacterium Nostoc muscorum under the influence of heavy metal ions, namely Co2+, Cr6+, Cu2+, Mn2+ and Ni2+ has been studied. One-step growth experiments revealed that heavy metal ions extended the latent period by 1-2 hrs with a concomitant decrease in the phage burst size. The latter was reduced in the order Cu2/Mn2+, Ni2+, Co2+ and Cr6+. The treatment of the phage-infected bacteria with heavy metal ions did not induce mutations affecting either the phage plaque morphology or burst size. The final phage titer after such a treatments was lowest with Co2+, Cu2+ and Cr6+. The inhibition of the phage growth under the influence of heavy metal ions is discussed in context with the interaction of cyanophage N-1 with the photosynthetic reactions in the host bacteria.

  13. Colorimetric chemosensor for multi-signaling detection of metal ions using pyrrole based Schiff bases.

    Science.gov (United States)

    Udhayakumari, Duraisamy; Velmathi, Sivan

    2014-03-25

    Pyrrole based Schiff bases act as a highly sensitive probe for metal ions in aqueous medium. Both receptors R1 and R2 are sensitive towards Fe(3+), Cu(2+), Hg(2+) and Cr(3+) among the other metal ions. The sensing ability of the receptors are investigated via colorimetric, optical and emission spectroscopic studies. The binding stoichiometries of R1 and R2 with metal ions have been determined as 2:1 by using Job's plot. The colorimetric receptors exhibited high sensitivity with a low detection limit of μM levels. In the presence of metal ions both receptors shows fluorescence quenching. This might be due to the photo induced electron transfer mechanism. The quenching constant was further determined using Stern-Volmer plot.

  14. Factorial experimental design for recovering heavy metals from sludge with ion-exchange resin.

    Science.gov (United States)

    Lee, I Hsien; Kuan, Yu-Chung; Chern, Jia-Ming

    2006-12-01

    Wastewaters containing heavy metals are usually treated by chemical precipitation method in Taiwan. This method can remove heavy metals form wastewaters efficiently, but the resultant heavy metal sludge is classified as hazardous solid waste and becomes another environmental problem. If we can remove heavy metals from sludge, it becomes non-hazardous waste and the treatment cost can be greatly reduced. This study aims at using ion-exchange resin to remove heavy metals such as copper, zinc, cadmium, and chromium from sludge generated by a PCB manufacturing plant. Factorial experimental design methodology was used to study the heavy metal removal efficiency. The total metal concentrations in the sludge, resin, and solution phases were measured respectively after 30 min reaction with varying leaching agents (citric acid and nitric acid); ion-exchange resins (Amberlite IRC-718 and IR-120), and temperatures (50 and 70 degrees C). The experimental results and statistical analysis show that a stronger leaching acid and a higher temperature both favor lower heavy metal residues in the sludge. Two-factors and even three-factor interaction effects on the heavy metal sorption in the resin phase are not negligible. The ion-exchange resin plays an important role in the sludge extraction or metal recovery. Empirical regression models were also obtained and used to predict the heavy metal profiles with satisfactory results.

  15. Rare-earth transition-metal intermetallics: Structure-bonding-property relationships

    Energy Technology Data Exchange (ETDEWEB)

    Han, M. K. [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    The explorations of rare-earth, transition metal intermetallics have resulted in the synthesis and characterization, and electronic structure investigation, as well as understanding the structure-bonding property relationships. The work has presented the following results: (1) Understanding the relationship between compositions and properties in LaFe13-xSix system: A detailed structural and theoretical investigation provided the understanding of the role of a third element on stabilizing the structure and controlling the transformation of cubic NaZn{sub 13}-type structures to the tetragonal derivative, as well as the relationship between the structures and properties. (2) Synthesis of new ternary rare-earth iron silicides Re2-xFe4Si14-y and proposed superstructure: This compound offers complex structural challenges such as fractional occupancies and their ordering in superstructure. (3) Electronic structure calculation of FeSi2: This shows that the metal-semiconductor phase transition depends on the structure. The mechanism of band gap opening is described in terms of bonding and structural distortion. This result shows that the electronic structure calculations are an essential tool for understanding the relationship between structure and chemical bonding in these compounds. (4) Synthesis of new ternary rare-earth Zinc aluminides Tb3Zn3.6Al7.4: Partially ordered structure of Tb3Zn3.6Al7.4 compound provides new insights into the formation, composition and structure of rare-earth transition-metal intermetallics. Electronic structure calculations attribute the observed composition to optimizing metal-metal bonding in the electronegative (Zn, Al) framework, while the specific ordering is strongly influenced by specific orbital interactions. (5) Synthesis of new structure type of Zn39(CrxAl1-x)81

  16. Rare-Earth Transition-Metal Intermetallics: Structure-bonding-Property Relationships

    Energy Technology Data Exchange (ETDEWEB)

    Han, Mi-Kyung [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    Our explorations of rare-earth, transition metal intermetallics have resulted in the synthesis and characterization, and electronic structure investigation, as well as understanding the structure-bonding-property relationships. Our work has presented the following results: (1) Understanding the relationship between compositions and properties in LaFe13-xSix system: A detailed structural and theoretical investigation provided the understanding of the role of a third element on stabilizing the structure and controlling the transformation of cubic NaZn13-type structures to the tetragonal derivative, as well as the relationship between the structures and properties. (2) Synthesis of new ternary rare-earth iron silicides RE2-xFe4Si14-y and proposed superstructure: This compound offers complex structural challenges such as fractional occupancies and their ordering in superstructure. (3) Electronic structure calculation of FeSi2: This shows that the metal-semiconductor phase transition depends on the structure. The mechanism of band gap opening is described in terms of bonding and structural distortion. This result shows that the electronic structure calculations are an essential tool for understanding the relationship between structure and chemical bonding in these compounds. (4) Synthesis of new ternary rare-earth Zinc aluminides Tb3Zn3.6Al7.4: Partially ordered structure of Tb3.6Zn13-xAl7.4 compound provides new insights into the formation, composition and structure of rare-earth transition-metal intermetallics. Electronic structure calculations attribute the observed composition to optimizing metal-metal bonding in the electronegative (Zn, Al) framework, while the specific ordering is strongly influenced by specific orbital interactions. (5) Synthesis of new structure type of Zn39(CrxAl1-x

  17. Occurrence of metal ions in rice produced in Uruguay

    Directory of Open Access Journals (Sweden)

    Mario Rivero

    2011-04-01

    Full Text Available The United Nations General Assembly declared the year 2004 the International Year of Rice under the concept "Rice is Life". The largest nutritional problems occurring globally are protein-energy malnutrition, Ca, Fe, I, Zn and vitamin A deficiencies. Being rice the staple food more consumed worldwide, outstanding care is taken on its composition levels.Uruguay has emerged as medium-size rice producer and Latin America's major rice exporter, and is now amongst the world's top ten. Thus, the knowledge of toxic as well as micronutrient elements is very important. Here is reported the determination in forty nine samples of rice (Oryza sativa L. of As, Cd, Cr, and Pb by ET AAS in samples digested by dry ashing, and Ca, Co, Cu, Fe, K, Mg, Mo, Mn, Na, Ni and Zn by FAAS and Hg by CV AAS using microwave-assisted decomposition.The amount of all the metal ions studied in this work fall within the range typical of rice around the world. All the rice samples tested showed lower levels of As, Cd, Hg and Pb than the maximum limit permitted by governmental and international organizations.Potassium was the most abundant mineral followed by Mg and Ca and amongst microelements the presence of Cu, Fe, Mo, Mn, Na and Zn was outstanding.The milling process highly affects the contents of K, Mg, Mn, Na and Zn while little influence has on Ca, Co, Cu and Fe concentrations.Unexpected loss of Ca, Fe and Mn during parboiling process was detected. 

  18. Metal-carbon clusters: The origin of the delayed atomic ion

    Science.gov (United States)

    Davis, K. M.; Peppernick, S. J.; Castleman, A. W.

    2006-04-01

    Studies of the emission of electrons from excited metal-carbon cluster systems that include the Met-Car (M8C12, where M is Ti, Zr, and V) also have revealed the evolution of a delayed atomic ion. The source of the delayed atomic ion, which involves the emission of ionized atoms on the microsecond time scale, is the focus of this investigation. By studying the delayed ionization of mixed zirconium and titanium carbon complexes produced in a laser vaporization source coupled to a time-of-flight mass spectrometer, for the first time both the zirconium and titanium delayed atomic ions were observed to be emitted in the same experiment. These studies allowed a determination that the source of the delayed atomic ion is an excited metal dicarbide. A plausible mechanism involving the excitation of a high Rydberg state of the metal dicarbide prior to an excited ion pair separation is proposed.

  19. First-principles calculations on implanted TiO2 by 3d transition metal ions

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    3d transition metal (V, Cr and Fe) ions are implanted into TiO2 by the method of metal ion implantation. The electronic band structures of TiO2 films doped 3d transition metal ions have been analyzed by ab initio band calculations based on a self-consistent full-potential linearized augmented plane-wave method within the first-principle formalism. Influence of implantation on TiO2 films is examined by the method of UV-visible spectrometry. The results of experiment and calculation show that the optical band gap of TiO2 films is narrowed by ion implantation. The calculation shows that the 3d state of V, Cr and Fe ions plays a significant role in red shift of UV-Vis absorbance spectrum.

  20. Process for the conversion of sugars to lactic acid and 2-hydroxy-3-butenoic acid or esters thereof comprising a metallo-silicate material and a metal ion

    DEFF Research Database (Denmark)

    2015-01-01

    A process for the preparation of lactic acid and 2-hydroxy- 3-butenoic acid or esters thereof from a sugar in the presence of a metallo-silicate material, a metal ion and a solvent, wherein the metal ion is selected from one or more of the group consisting of potassium ions, sodium ions, lithium ...... ions, rubidium ions and caesium ions....