Antagonistic Functions of USAG-1 and RUNX2 during Tooth Development.

Directory of Open Access Journals (Sweden)

Yumiko Togo

Full Text Available Supernumerary teeth and tooth agenesis are common morphological anomalies in humans. We previously obtained evidence that supernumerary maxillary incisors form as a result of the successive development of the rudimentary maxillary incisor tooth germ in Usag-1 null mice. The development of tooth germs is arrested in Runx2 null mice, and such mice also exhibit lingual epithelial buds associated with the upper molars and incisors. The aim of this study is to investigate the potential crosstalk between Usag-1 and Runx2 during tooth development. In the present study, three interesting phenomena were observed in double null Usag-1-/-/Runx2-/- mice: the prevalence of supernumerary teeth was lower than in Usag-1 null mice; tooth development progressed further compared than in Runx2 null mice; and the frequency of molar lingual buds was lower than in Runx2 null mice. Therefore, we suggest that RUNX2 and USAG-1 act in an antagonistic manner. The lingual bud was completely filled with odontogenic epithelial Sox2-positive cells in the Usag-1+/+/Runx2-/- mice, whereas almost no odontogenic epithelial Sox2-positive cells contributed to supernumerary tooth formation in the rudimentary maxillary incisors of the Usag-1-/-/Runx2+/+ mice. Our findings suggest that RUNX2 directly or indirectly prevents the differentiation and/or proliferation of odontogenic epithelial Sox2-positive cells. We hypothesize that RUNX2 inhibits the bone morphogenetic protein (BMP and/or Wnt signaling pathways regulated by USAG-1, whereas RUNX2 expression is induced by BMP signaling independently of USAG-1.

[Development of a screening scale for children at risk of baby bottle tooth decay].

Science.gov (United States)

Khadra-Eid, J; Baudet, D; Fourny, M; Sellier, E; Brun, C; François, P

2012-03-01

Baby bottle tooth decay is a severe form of early childhood caries. This study aims to elaborate a screening tool for at risk children in order to facilitate primary prevention. A case-control study was conducted among children suffering from baby bottle tooth decay and children with no dental caries. Cases were children aged 5 years or less at diagnosis who experienced at least four caries with one or more affecting maxillary incisors. Controls were children matched for age and sex. Parents were interviewed by phone about their child's exposure to potential risk factors. We included 88 children suffering from baby bottle tooth decay and 88 children with no dental caries. In multivariate analysis, low social class (OR 6.39 [95% CI, 1.45-28.11]), prolonged bottle feeding or bedtime feeding (OR 153.2 [95% CI, 11.77-1994.96]), and snacking (OR 5.94 [95% CI, 1.35-26.2]) were significantly associated with baby bottle tooth decay. Regular dental visits were a significant protecting factor (OR 0.13 [95% CI, 0.02-0.77]). A score was developed using these significant risk factors and tested on the survey population. The mean score was 13/20 for cases and 4/20 for controls. These results are in accordance with the literature, except for brushing teeth, which was not significantly associated with baby bottle tooth decay in our study. A screening scale with a score of 20 points was proposed. Future validation is required. Pediatricians and general practitioners should encourage parents to change their habits. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Regulation of proliferation in developing human tooth germs by MSX homeodomain proteins and cyclin-dependent kinase inhibitor p19INK4d.

Science.gov (United States)

Kero, Darko; Vukojevic, Katarina; Stazic, Petra; Sundov, Danijela; Mardesic Brakus, Snjezana; Saraga-Babic, Mirna

2017-10-02

Before the secretion of hard dental tissues, tooth germs undergo several distinctive stages of development (dental lamina, bud, cap and bell). Every stage is characterized by specific proliferation patterns, which is regulated by various morphogens, growth factors and homeodomain proteins. The role of MSX homeodomain proteins in odontogenesis is rather complex. Expression domains of genes encoding for murine Msx1/2 during development are observed in tissues containing highly proliferative progenitor cells. Arrest of tooth development in Msx knockout mice can be attributed to impaired proliferation of progenitor cells. In Msx1 knockout mice, these progenitor cells start to differentiate prematurely as they strongly express cyclin-dependent kinase inhibitor p19 INK4d . p19 INK4d induces terminal differentiation of cells by blocking the cell cycle in mitogen-responsive G1 phase. Direct suppression of p19 INK4d by Msx1 protein is, therefore, important for maintaining proliferation of progenitor cells at levels required for the normal progression of tooth development. In this study, we examined the expression patterns of MSX1, MSX2 and p19 INK4d in human incisor tooth germs during the bud, cap and early bell stages of development. The distribution of expression domains of p19 INK4d throughout the investigated period indicates that p19 INK4d plays active role during human tooth development. Furthermore, comparison of expression domains of p19 INK4d with those of MSX1, MSX2 and proliferation markers Ki67, Cyclin A2 and pRb, indicates that MSX-mediated regulation of proliferation in human tooth germs might not be executed by the mechanism similar to one described in developing tooth germs of wild-type mouse.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Science.gov (United States)

D'Emic, Michael D; Whitlock, John A; Smith, Kathlyn M; Fisher, Daniel C; Wilson, Jeffrey A

2013-01-01

Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently evolved the highest known tooth replacement rates among archosaurs.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Directory of Open Access Journals (Sweden)

Michael D D'Emic

Full Text Available BACKGROUND: Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. METHODOLOGY/PRINCIPAL FINDINGS: We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days. Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. CONCLUSIONS/SIGNIFICANCE: Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size, and derived titanosaurs and

Ontogenetic development of the nervus terminalis in toothed whales. Evidence for its non-olfactory nature.

Science.gov (United States)

Buhl, E H; Oelschläger, H A

1986-01-01

For the first time in cetaceans, the development of the terminalis system and its continuity between the olfactory placode and the telencephalon has been demonstrated by light microscopy. In the early development of toothed whales (Odontoceti) this system is partially incorporated within the fila olfactoria which grow out from the olfactory placode. As the peripheral olfactory system is reduced in later stages, a strongly developed ganglionlike structure (terminalis ganglion) remains within the primitive meninx. Peripherally it is connected via the cribriform plate with ganglionic cell clusters near the septal mucosa. Centrally it is attached to the telencephalon (olfactory tubercle, septal region) by several nerve fibre bundles. In contrast to all other mammalian groups, toothed whales and dolphins are anosmatic while being totally adapted to aquatic life. Therefore the remaining ganglion and plexus must have non-olfactory properties. They may be responsible for the autonomic innervation of intracranial arteries and of the large mucous epithelia in the accessory nasal air sacs. The morphology, evolution and functional implications of the terminalis system in odontocetes and other mammals are discussed.

Patterns of Glycoconjugate Distribution during Molar Tooth Germ Development in Mice

Directory of Open Access Journals (Sweden)

AR. Varasteh

2007-09-01

Full Text Available Objective: The aim of the present study was to evaluate the structure and distribution of Glycoconjugates during molar tooth germ development in mice.Materials and Methods: Sixteen tooth germs were obtained from BALB/c mice embryos 15 to 18 days post-gestation and fixed in 10% formalin. After routine tissue processing, 5μm sections were cut and stained with BSA1-B4 and PNA using the lectin histochemical method. All slides were evaluated by light microscopy.Results: Both lectins showed positive reaction in the tooth germ but with spatiotemporal differences. During bell stage, the reaction was strong with BSA1-B4 but moderate with PNA. Strong PNA uptake was observed in the odontoblastic and ameloblastic nuclei alongwith the apical cytoplasm of the ameloblasts.Conclusion: Although the lectins that were used in the present study recognize the same terminal sugar residue, they reacted with different disaccharide sequences with various penaltomer sugars. Therefore it may be assumed that the pattern of affinity for different parts of the developing tooth germ such as ameloblasts and odontoblasts is different in various lectins.

Morphological study of tooth development in podoplanin-deficient mice.

Directory of Open Access Journals (Sweden)

Kenyo Takara

Full Text Available Podoplanin is a mucin-type highly O-glycosylated glycoprotein identified in several somatyic cells: podocytes, alveolar epithelial cells, lymphatic endothelial cells, lymph node stromal fibroblastic reticular cells, osteocytes, odontoblasts, mesothelial cells, glia cells, and others. It has been reported that podoplanin-RhoA interaction induces cytoskeleton relaxation and cell process stretching in fibroblastic cells and osteocytes, and that podoplanin plays a critical role in type I alveolar cell differentiation. It appears that podoplanin plays a number of different roles in contributing to cell functioning and growth by signaling. However, little is known about the functions of podoplanin in the somatic cells of the adult organism because an absence of podoplanin is lethal at birth by the respiratory failure. In this report, we investigated the tooth germ development in podoplanin-knockout mice, and the dentin formation in podoplanin-conditional knockout mice having neural crest-derived cells with deficiency in podoplanin by the Wnt1 promoter and enhancer-driven Cre recombinase: Wnt1-Cre;PdpnΔ/Δmice. In the Wnt1-Cre;PdpnΔ/Δmice, the tooth and alveolar bone showed no morphological abnormalities and grow normally, indicating that podoplanin is not critical in the development of the tooth and bone.

Morphological study of tooth development in podoplanin-deficient mice.

Science.gov (United States)

Takara, Kenyo; Maruo, Naoki; Oka, Kyoko; Kaji, Chiaki; Hatakeyama, Yuji; Sawa, Naruhiko; Kato, Yukinari; Yamashita, Junro; Kojima, Hiroshi; Sawa, Yoshihiko

2017-01-01

Podoplanin is a mucin-type highly O-glycosylated glycoprotein identified in several somatyic cells: podocytes, alveolar epithelial cells, lymphatic endothelial cells, lymph node stromal fibroblastic reticular cells, osteocytes, odontoblasts, mesothelial cells, glia cells, and others. It has been reported that podoplanin-RhoA interaction induces cytoskeleton relaxation and cell process stretching in fibroblastic cells and osteocytes, and that podoplanin plays a critical role in type I alveolar cell differentiation. It appears that podoplanin plays a number of different roles in contributing to cell functioning and growth by signaling. However, little is known about the functions of podoplanin in the somatic cells of the adult organism because an absence of podoplanin is lethal at birth by the respiratory failure. In this report, we investigated the tooth germ development in podoplanin-knockout mice, and the dentin formation in podoplanin-conditional knockout mice having neural crest-derived cells with deficiency in podoplanin by the Wnt1 promoter and enhancer-driven Cre recombinase: Wnt1-Cre;PdpnΔ/Δmice. In the Wnt1-Cre;PdpnΔ/Δmice, the tooth and alveolar bone showed no morphological abnormalities and grow normally, indicating that podoplanin is not critical in the development of the tooth and bone.

Recent advances in engineering of tooth and tooth structures using postnatal dental cells

Directory of Open Access Journals (Sweden)

Masaki J. Honda

2010-02-01

This review focuses on the performance of postnatal and adult dental cells that have been used for generating teeth. Their ability to contribute to tooth development was assessed in the omentum or in the tooth socket. Adult dental cells were limited in their potential owing to various parameters. From these results described, new approaches for regenerated teeth are proposed in this review. One strategy to replace teeth is tooth root engineering using tissue from postnatal teeth. Since the enamel organ epithelium disappears after tooth maturation, the epithelial rest cells of Malassez were evaluated to determine their capacity to generate enamel. From these results, it is suggested that erupted mature teeth have cell sources with the capacity to produce tooth root. The development of biological approaches for tooth root regeneration using postnatal dental cells is promising and remains one of the greatest challenges in the dental field in the years to come.

Study on tooth development, past, present, and future.

Science.gov (United States)

Jung, Han-Sung; Hitoshi, Yamamoto; Kim, Hee-Jin

2003-04-01

For decades, the understanding of craniofacial development has been a central issue in odontology and developmental biology. As a consequence, a significant number of deformities are being studied for their variety of genotype and phenotype. Although there is little doubt about the essential roles of homeobox genes, transcription factors, and growth factors, we now know at least the fundamental strategy of craniofacial biology. The tooth as an organ performs a whole range of functions, each of which is truly indispensable for the maintenance of life. The possession of teeth is, therefore, obviously coupled with the complication of the natural structure of an individual organism. In the following, we shall focus on a brief history of tooth studies and some suggestions for obtaining a full understanding of teeth in the future. Copyright 2003 Wiley-Liss, Inc.

The Importance of Tooth Decay Prevention in Children under Three

Science.gov (United States)

Milgrom, Peter; Huebner, Colleen; Chi, Donald

2010-01-01

Tooth decay and tooth loss was once the norm but public health interventions have led to major improvements for most people. Nevertheless, not all children have benefited. Dental disease in young children is unacceptably high. Tooth decay is preventable. Early childhood educators are often the first to notice the problem. Professional…

A simple rule governs the evolution and development of hominin tooth size.

Science.gov (United States)

Evans, Alistair R; Daly, E Susanne; Catlett, Kierstin K; Paul, Kathleen S; King, Stephen J; Skinner, Matthew M; Nesse, Hans P; Hublin, Jean-Jacques; Townsend, Grant C; Schwartz, Gary T; Jernvall, Jukka

2016-02-25

The variation in molar tooth size in humans and our closest relatives (hominins) has strongly influenced our view of human evolution. The reduction in overall size and disproportionate decrease in third molar size have been noted for over a century, and have been attributed to reduced selection for large dentitions owing to changes in diet or the acquisition of cooking. The systematic pattern of size variation along the tooth row has been described as a 'morphogenetic gradient' in mammal, and more specifically hominin, teeth since Butler and Dahlberg. However, the underlying controls of tooth size have not been well understood, with hypotheses ranging from morphogenetic fields to the clone theory. In this study we address the following question: are there rules that govern how hominin tooth size evolves? Here we propose that the inhibitory cascade, an activator-inhibitor mechanism that affects relative tooth size in mammals, produces the default pattern of tooth sizes for all lower primary postcanine teeth (deciduous premolars and permanent molars) in hominins. This configuration is also equivalent to a morphogenetic gradient, finally pointing to a mechanism that can generate this gradient. The pattern of tooth size remains constant with absolute size in australopiths (including Ardipithecus, Australopithecus and Paranthropus). However, in species of Homo, including modern humans, there is a tight link between tooth proportions and absolute size such that a single developmental parameter can explain both the relative and absolute sizes of primary postcanine teeth. On the basis of the relationship of inhibitory cascade patterning with size, we can use the size at one tooth position to predict the sizes of the remaining four primary postcanine teeth in the row for hominins. Our study provides a development-based expectation to examine the evolution of the unique proportions of human teeth.

Dental Age Estimation (DAE): Data management for tooth development stages including the third molar. Appropriate censoring of Stage H, the final stage of tooth development.

Science.gov (United States)

Roberts, Graham J; McDonald, Fraser; Andiappan, Manoharan; Lucas, Victoria S

2015-11-01

The final stage of dental development of third molars is usually helpful to indicate whether or not a subject is aged over 18 years. A complexity is that the final stage of development is unlimited in its upper border. Investigators usually select an inappropriate upper age limit or censor point for this tooth development stage. The literature was searched for appropriate data sets for dental age estimation and those that provided the count (n), the mean (x¯), and the standard deviation (sd) for each of the tooth development stages. The Demirjian G and Demirjian H were used for this study. Upper and lower limits of the Stage G and Stage H data were calculated limiting the data to plus or minus three standard deviations from the mean. The upper border of Stage H was limited by appropriate censoring at the maximum value for Stage G. The maximum age at attainment from published data, for Stage H, ranged from 22.60 years to 34.50 years. These data were explored to demonstrate how censoring provides an estimate for the correct maximum age for the final stage of Stage H as 21.64 years for UK Caucasians. This study shows that confining the data array of individual tooth developments stages to ± 3sd provides a reliable and logical way of censoring the data for tooth development stages with a Normal distribution of data. For Stage H this is inappropriate as it is unbounded in its upper limit. The use of a censored data array for Stage H using Percentile values is appropriate. This increases the reliability of using third molar Stage H alone to determine whether or not an individual is over 18 years old. For Stage H, individual ancestral groups should be censored using the same technique. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

A bizarre new toothed mysticete (Cetacea) from Australia and the early evolution of baleen whales

OpenAIRE

Fitzgerald, Erich M.G

2006-01-01

Extant baleen whales (Cetacea, Mysticeti) are all large filter-feeding marine mammals that lack teeth as adults, instead possessing baleen, and feed on small marine animals in bulk. The early evolution of these superlative mammals, and their unique feeding method, has hitherto remained enigmatic. Here, I report a new toothed mysticete from the Late Oligocene of Australia that is more archaic than any previously described. Unlike all other mysticetes, this new whale was small, had enormous eye...

EMMPRIN (basigin/CD147) is involved in the morphogenesis of tooth germ in mouse molars.

Science.gov (United States)

Xie, Ming; Jiao, Ting; Chen, Yuqin; Xu, Chun; Li, Jing; Jiang, Xinquan; Zhang, Fuqiang

2010-05-01

The pattern of gene expression for extracellular matrix metalloproteinase inducer (EMMPRIN) was revealed in the tooth germ of mouse mandibular molars using quantitative real-time PCR. In situ hybridization and immunohistochemical study demonstrated the characteristic distribution of EMMPRIN in the different stages of tooth germ development. To investigate the functional role played by EMMPRIN in tooth germ development, EMMPRIN siRNA interference approach was carried out in cultured mouse mandibles at embryonic day 11.0 (E11.0). The results showed that EMMPRIN siRNA-treated explants exhibited a marked growth inhibition of tooth germ compared to the control and scrambled siRNA-treated explants. Meanwhile, a significant increase in MT1-MMP mRNA expression and a reduction in MMP-2, MMP-3, MMP-9, MMP-13 and MT2-MMP mRNA expression were observed in the mouse mandibles following EMMPRIN abrogation. The current results indicate that EMMPRIN could thus be involved in the early stage of tooth germ development and morphogenesis, possibly by regulating the expression of MMP genes.

RNA-Sequencing Analyses Demonstrate the Involvement of Canonical Transient Receptor Potential Channels in Rat Tooth Germ Development

Directory of Open Access Journals (Sweden)

Jun Yang

2017-06-01

Full Text Available Tooth development depends on multiple molecular interactions between the dental epithelium and mesenchyme, which are derived from ectodermal and ectomesenchymal cells, respectively. We report on a systematic RNA sequencing analysis of transcriptional expression levels from the bud to hard tissue formation stages of rat tooth germ development. We found that GNAO1, ENO1, EFNB1, CALM1, SIAH2, ATP6V0A1, KDELR2, GTPBP1, POLR2C, SORT1, and members of the canonical transient receptor potential (TRPC channel family are involved in tooth germ development. Furthermore, Cell Counting Kit 8 (CCK8 and Transwell migration assays were performed to explore the effects of these differentially expressed genes (DEGs on the proliferation and migration of dental pulp stem cells. Immunostaining revealed that TRPC channels are expressed at varying levels during odontogenesis. The identified genes represent novel candidates that are likely to be vital for rat tooth germ development. Together, the results provide a valuable resource to elucidate the gene regulatory mechanisms underlying mammalian tooth germ development.

Effect of early childhood malnutrition on tooth eruption in Haitian adolescents.

Science.gov (United States)

Psoter, W; Gebrian, B; Prophete, S; Reid, B; Katz, R

2008-04-01

The objective of this retrospective cohort study was to determine the effects of early childhood protein-energy malnutrition (EC-PEM) and current nutritional status as defined by anthropomorphic measures on the exfoliation and eruption patterns of teeth among adolescents. Oral clinical examinations were conducted in 2005 using World Health Organization (WHO) diagnostic criteria on 498 11- to 13-year-old Haitians for whom early childhood malnutrition data were available. Anthropomorphic records (weight-for-age) from the Haitian Health Foundation computerized database on children from birth through 5-years old were utilized. Current heights and weights were ascertained. Both sets of data were converted to z-scores based on the National Center for Health Statistics (NCHS) referent database. Based upon these z-scores, EC-PEM and current malnutrition categories were developed for this study. The analyses separately regressed the number of primary and permanent teeth on age, gender, EC-PEM status and current nutritional status. Both a delayed exfoliation of primary teeth and a delayed eruption of permanent teeth were associated with EC-PEM and current stunting in adolescence. The observed associations were either direct and statistically significant or indirectly demonstrated by presenting evidence of confounding. The overall interpretation of the models is that malnutrition beginning in the earliest years and extending throughout childhood influences the exfoliation and eruption of teeth. These findings present evidence of an association between tooth exfoliation/eruption patterns and both EC-PEM and nutritional insufficiency (stunting) throughout childhood. This observed delay in the exfoliation of the primary dentition and in the eruption of the permanent dentition has practical significance in interpreting age-specific dental caries data from populations with different malnutrition experiences.

Spatiotemporal expression of caveolin-1 and EMMPRIN during mouse tooth development.

Science.gov (United States)

Shi, Lu; Li, Lingyun; Wang, Ding; Li, Shu; Chen, Zhi; An, Zhengwen

2016-06-01

Caveolin-1 is a scaffolding protein involved in the formation of cholesterol-rich caveolae lipid rafts within the plasma membrane and is capable of collecting signaling molecules into the caveolae and regulating their activity, including extracellular matrix metalloproteinase inducer (EMMPRIN). However, detailed expression patterns of caveolin-1 and EMMPRIN in the developing dental germ are largely unknown. The present study investigated the expression patterns of caveolin-1 and EMMPRIN in the developing mouse tooth germ by immunohistochemistry and real-time polymerase chain reaction. At the bud stage, caveolin-1 expression was initiated in the epithelium bud and mesenchymal cells, while EMMPRIN was weakly expressed at this stage. At the cap stage, caveolin-1 protein was located in the lingual part of the tooth germ; however, EMMPRIN protein was located in the labial part. From the bell stage to 2 days postnatal, caveolin-1 expression was detected in the ameloblasts and cervical loop area; with EMMPRIN expression in the ameloblasts and odontoblasts. Real-time polymerase chain reaction results showed that both caveolin-1 and EMMPRIN mRNA levels increased gradually with progression of developmental stages, and peaked at day two postnatal. The current finding suggests that both caveolin-1 and EMMPRIN take part in mouse tooth development, especially in the differentiation and organization of odontogenic tissues.

Can dead man tooth do tell tales? Tooth prints in forensic identification.

Science.gov (United States)

Christopher, Vineetha; Murthy, Sarvani; Ashwinirani, S R; Prasad, Kulkarni; Girish, Suragimath; Vinit, Shashikanth Patil

2017-01-01

We know that teeth trouble us a lot when we are alive, but they last longer for thousands of years even after we are dead. Teeth being the strongest and resistant structure are the most significant tool in forensic investigations. Patterns of enamel rod end on the tooth surface are known as tooth prints. This study is aimed to know whether these tooth prints can become a forensic tool in personal identification such as finger prints. A study has been targeted toward the same. In the present in-vivo study, acetate peel technique has been used to obtain the replica of enamel rod end patterns. Tooth prints of upper first premolars were recorded from 80 individuals after acid etching using cellulose acetate strips. Then, digital images of the tooth prints obtained at two different intervals were subjected to biometric conversion using Verifinger standard software development kit version 6.5 software followed by the use of Automated Fingerprint Identification System (AFIS) software for comparison of the tooth prints. Similarly, each individual's finger prints were also recorded and were subjected to the same software. Further, recordings of AFIS scores obtained from images were statistically analyzed using Cronbach's test. We observed that comparing two tooth prints taken from an individual at two intervals exhibited similarity in many cases, with wavy pattern tooth print being the predominant type. However, the same prints showed dissimilarity when compared with other individuals. We also found that most of the individuals with whorl pattern finger print showed wavy pattern tooth print and few loop type fingerprints showed linear pattern of tooth prints. Further more experiments on both tooth prints and finger prints are required in establishing an individual's identity.

Risk factors for developing tooth sensitivity and gingival irritation associated with nightguard vital bleaching.

Science.gov (United States)

Leonard, R H; Haywood, V B; Phillips, C

1997-08-01

The purpose of this study was to determine risk factors in the development of tooth sensitivity and gingival irritation associated with the nightguard vital bleaching technique. The potential risk factors evaluated (sex, age, reported allergy, whitening solution, number of times the solution was changed daily [its usage pattern], and dental arch) were collected from the daily log form turned in by each of the 64 participants after completion of the 6-week lightening process. Also evaluated for each participant, from color slides, were tooth characteristics such as gingival recession, defective restorations, abfraction lesions, enamel-cementum abrasion, etc, and reported side effects. The generalized Mantel-Haenszel statistic was used to assess the association between the potential risk factors and the development of tooth sensitivity and/or gingival irritation. No statistical relationship existed between age, sex, allergy, tooth characteristics, or the dental arch lightened and the development of side effects. Initially, a statistically significant association existed between side effects and the whitening solution used. However, when the analysis was controlled for usage pattern, this relationship disappeared. Patients who changed the whitening solution more than once a day reported statistically significantly more side effects than did those who did not change the whitening solution during their usage time.

A model of growth restraints to explain the development and evolution of tooth shapes in mammals.

Science.gov (United States)

Osborn, Jeffrey W

2008-12-07

The problem investigated here is control of the development of tooth shape. Cells at the growing soft tissue interface between the ectoderm and mesoderm in a tooth anlage are observed to buckle and fold into a template for the shape of the tooth crown. The final shape is created by enamel secreted onto the folds. The pattern in which the folds develop is generally explained as a response to the pattern in which genes are locally expressed at the interface. This congruence leaves the problem of control unanswered because it does not explain how either pattern is controlled. Obviously, cells are subject to Newton's laws of motion so that mechanical forces and constraints must ultimately cause the movements of cells during tooth morphogenesis. A computer model is used to test the hypothesis that directional resistances to growth of the epithelial part of the interface could account for the shape into which the interface folds. The model starts with a single epithelial cell whose growth is constrained by 4 constant directional resistances (anterior, posterior, medial and lateral). The constraints force the growing epithelium to buckle and fold. By entering into the model different values for these constraints the modeled epithelium is induced to buckle and fold into the different shapes associated with the evolution of a human upper molar from that of a reptilian ancestor. The patterns and sizes of cusps and the sequences in which they develop are all correctly reproduced. The model predicts the changes in the 4 directional constraints necessary to develop and evolve from one tooth shape into another. I conclude more generally expressed genes that control directional resistances to growth, not locally expressed genes, may provide the information for the shape into which a tooth develops.

Diagnostics of power transmissions system with tooth gear

Directory of Open Access Journals (Sweden)

Grzegorz WOJNAR

2008-01-01

Full Text Available This paper presents results of laboratory tests that were aimed at detecting early stages of various faults in toothed wheels by measurement and analysis of transverse vibration speed of the transmission gear shafts. In experimental investigation, cracking of the root tooth and chipping of the tooth were detected. The laser vibrometer Ometron VH300+ was used for non-contact measurement of shaft transversal vibration speed. Gear vibrations were recorded in selected points of gear housing and gear shafts at different speeds and gear loads. Results were analyzed and compared but in this paper is presented only selected examples. This paper shows that on the basis of the transverse vibration speed of transmission gear shafts, it is possible to detect defects at an earlier stage than on the basis of the housing vibration accelerations. In the case of measuring gear shaft vibration velocity, the way of the signal generated by the defect of a gear wheel (or bearing is shortened as well as the influence of composed transmittance of the bearing-gear housing system is eliminated. WV time-frequency analysis and complex continuous wavelet transformations were used for detection. The authors introduced a measure of local tooth damage, which was proportional to the size of damage. The results of research presented in this paperconfirmed that the defect's measure is very sensitive to the development of teeth faults.

Tooth development in Ambystoma mexicanum: phosphatase activities, calcium accumulation and cell proliferation in the tooth-forming tissues.

Science.gov (United States)

Wistuba, Joachim; Ehmcke, Jens; Clemen, Günter

2003-06-01

Prerequisites of tooth formation, cell proliferation in the tooth-forming tissues, calcium accumulation and the enzymatic activities of alkaline (ALP) and acid phosphatases (ACP) were investigated by immunohistochemical and histochemical methods in various developmental stages of the Mexican Axolotl, Ambystoma mexicanum. During the growth of replacement teeth, the tooth-forming tissues continually recruit cells from the surrounding regions. The basal layer of the oral epithelium, the dental lamina and sometimes even the outer enamel epithelium provide cells for the differentiated inner enamel epithelium, in which the active ameloblasts are localized. The differentiating odontoblasts are derived from proliferating cells situated basally to the replacement teeth in the mesenchymal tissue. When differentiation has started and the cells have become functional, proliferative activity can no longer be observed. Calcium is accumulated close to the site of mineralization in the inner enamel epithelium and in the odontoblasts as it is in mammals, elasmobranchii and teleostei. The activities of ACP and ALP related to the mineralization of the replacement teeth are separated spatially and not sequentially as they are in mammals. However, the results indicate a similar function of these enzymatic components in relation to tooth formation and maturation of mineral deposition. Most of the substantial processes related to tooth formation reported from other vertebrates occur in a manner similar to that in Ambystoma mexicanum, but there also seem to be basic mechanisms present that are realised in a unique way in this urodele.

Tooth Morphogenesis and FGF4 Expression During Development of Molar Tooth in Three Muroid Rodents: Calomyscus elburzensis (Calomyscidae), Mesocricetus auratus (Cricetidae) and Mus musculus (Muridae).

Science.gov (United States)

Hamidi, Kordiyeh; Darvish, Jamshid; Matin, Maryam M; Javanmard, Athar Sadat; Kilpatrick, C William

2017-12-01

To date, no studies have examined the tooth formation during developmental stages of brush-tailed mice (Calomyscidae) and true hamsters (Cricetidae). Herein, we compared the timing of tooth morphogenesis and FGF4 expression pattern during development of the first lower molar in Goodwin's brush-tailed mouse, Calomyscus elburzensis with two other muroid rodents; the house mouse, Mus musculus (Muridae), model organism for tooth morphogenesis, and the golden hamster, Mesocricetus auratus which shares great similarities in cusp pattern with brush-tailed mice. All three species were bred in captivity and developing embryos were isolated at different embryonic days (E). Histological evaluation of lower molars was performed and spatiotemporal pattern of FGF4 expression was determined by immunohistochemistry. Results indicated that morphogenesis of the tooth cusps starts at the beginning of the cap stage of the first lower molar (E14 in house mouse, about E11.5 in golden hamster and E22 in Goodwin's brush-tailed mouse). During the cap to bell stage (E15 in house mouse, E12 in golden hamster and at about E24 in Goodwin's brush-tailed mouse), a decrease in the expression of FGF4 was observed in the mesenchyme, except for the cusp tips. According to our observations, the developmental process of the first lower molar formation in Goodwin's brush-tailed mouse began much later as compared with the other two species. Despite the differences in the temporal pattern of molar development between these three members of the same superfamily (Muroidea), the correlation in the expression of FGF4 with specific stages of tooth morphogenesis supported its regulatory function. Anat Rec, 300:2138-2149, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Human diet in the early medieval period: Tooth wear, mastication, enamel thickness and its relationship to social stratification

Czech Academy of Sciences Publication Activity Database

Ibrová, A.; Dupej, J.; Stránská, Petra; Velemínský, P.; Poláček, Lumír; Velemínská, J.

2017-01-01

Roč. 162, S64 (2017), s. 226 ISSN 0002-9483. [Annual Meeting of the American Association of Physical Anthropologists /86./. 19.04.2017-22.04.2017, New Orleans] Institutional support: RVO:67985912 ; RVO:68081758 Keywords : Early Middle Ages * human diet * anthropology * tooth wear * Central Europe Subject RIV: AC - Archeology, Anthropology, Ethnology; AC - Archeology, Anthropology, Ethnology (ARUB-Q) OBOR OECD: Archaeology; Archaeology (ARUB-Q) http://onlinelibrary.wiley.com/doi/10.1002/ajpa.23210/pdf

Sea urchin tooth mineralization: Calcite present early in the aboral plumula

Science.gov (United States)

Stock, Stuart R.; Veis, Arthur; Xiao, Xianghui; Almer, Jonathan D.; Dorvee, Jason R.

2012-01-01

In both vertebrate bone, containing carbonated hydroxyapatite as the mineral phase, and in invertebrate hard tissue comprised of calcium carbonate, a popular view is that the mineral phase develops from a long-lived amorphous precursor which later transforms into crystal form. Important questions linked to this popular view are: When and where is the crystallized material formed, and is amorphous solid added subsequently to the crystalline substrate? Sea urchin teeth, in which the earliest mineral forms within isolated compartments, in a time and position dependent manner, allow direct investigation of the timing of crystallization of the calcite primary plates. Living teeth of the sea urchin Lytechinus variegatus, in their native coelomic fluid, were examined by high-energy synchrotron x-ray diffraction. The diffraction data show that calcite is present in the most aboral portions of the plumula, representing the very earliest stages of mineralization, and that this calcite has the same crystal orientation as in the more mature adoral portions of the same tooth. Raman spectroscopy of the aboral plumula confirms the initial primary plate mineral material is calcite and does not detect amorphous calcium carbonate; in the more mature adoral incisal flange, it does detect a broader calcite peak, consistent with two or more magnesium compositions. We hypothesize that some portion of each syncytial membrane in the plumula provides the information for nucleation of identically oriented calcite crystals that subsequently develop to form the complex geometry of the single crystal sea urchin tooth. PMID:22940703

Orthodontic Tooth Movement: A Historic Prospective.

Science.gov (United States)

Will, Leslie A

2016-01-01

The earliest report on orthodontic tooth movement in the English literature was published in 1911. Oppenheim carried out studies on baboons to determine what histologic changes occurred during tooth movement. Reitan and many others carried out research into the nature of tooth movement. The pressure-tension model of tooth movement developed from these studies, whereby the two sides of the tooth responded to forces as if in isolation. A second theory, proposed by Stuteville in 1938, was the hydraulic theory of tooth movement. In this theory, fluid from the vasculature, lymphatic system and intercellular spaces responds to the forces of tooth movement, damping the force and limiting movement. Bien and Baumrind expanded on this theory with their own studies in the 1960s. It is clear that both the pressure-tension and fluid flow concepts have merit, but considerable work needs to be done to ascertain the details so that tooth movement can be managed and controlled. © 2016 S. Karger AG, Basel.

Treatment of a horizontal root-fractured tooth with decoronation procedure: case report

Directory of Open Access Journals (Sweden)

Selen Esin Yoldaş

2016-05-01

Full Text Available INTRODUCTION: Early loss of permanent anterior teeth due to trauma can cause esthetic and functional problems for young patients. In such cases, replacement of the missing tooth with traditional approaches is possible; however such approaches will reduce the chance of the patient to receive an esthetic and consistent treatment in the future. CASE REPORT: A 12-year-old male patient referred to our clinic with a history of trauma. Complicated crown fracture in tooth no.11 and horizontal root fracture in tooth no. 21 was detected. Following root canal treatment, tooth no. 11 was restored with a fiber post and a strip crown. To avoid alveolar bone loss due to early tooth extraction, decoronation procedure, an alternative approach, was applied to tooth no. 21. This procedure consisted of leaving the root fragment inside the alveolar socket following the removal of the crown. For the rehabilitation of the missing crown, a partial removable prosthesis was implemented. The patient was recalled in 6., 12. and 18. months. Within the follow-up period, no reduction in the alveolar bone level was seen. No sign of infection was evident. The remaining root fragment kept on resorbing. Tooth no. 11 remained symptom-free as well. The patient is still being followed. CONCLUSION: Decoronation is essentially a treatment choice for preventing alveolar bone loss in ankylosed teeth considered for extraction. In this case report, decoronation was shown to be a suitable alternative also for a fractured, non-ankylosed tooth.

Development of the canine tooth in the beagle

International Nuclear Information System (INIS)

Amimoto, A.; Iwamoto, S.; Hachimura, H.; Miyamoto, T.; Murata, T.; Taura, Y.; Nakama, S.; Hayashi, K.

1993-01-01

The growth of the crown and root in the canine tooth of beagle dogs were observed macroscopically and radiographically, and changes of occlusion with age were investigated. Completion of growth in the crown of the canine tooth was observed in both mandible and maxilla, and its eruption was accompanied by development of the dental root. The permanent canine erupted on the lingual side of deciduous canine in the mandible, and on the mesial side of the deciduous canine in the maxilla. Movement of the permanent canine to normal occlusal position(buccal direction in mandibular canine, and distal direction in maxillary canine)was followed by the loss of the deciduous canine. Coexistence of the permanent and deciduous canines occurred for about 2.4 weeks in the maxilla and about 1.4 weeks in the mandible, on average. Macroscopically, the growth of the permanent canine was completed by 33 weeks of age in the mandible and about 34 weeks of age in the maxilla. The mature root of the permanent canine was recognized radiographically at about 43 weeks of age in the mandible and 47 weeks of age in the maxilla

Tooth erosion and eating disorders: a systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Ana Paula Hermont

Full Text Available BACKGROUND: Eating disorders are associated with the highest rates of morbidity and mortality of any mental disorders among adolescents. The failure to recognize their early signs can compromise a patient's recovery and long-term prognosis. Tooth erosion has been reported as an oral manifestation that might help in the early detection of eating disorders. OBJECTIVES: The aim of this systematic review and meta-analysis was to search for scientific evidence regarding the following clinical question: Do eating disorders increase the risk of tooth erosion? METHODS: An electronic search addressing eating disorders and tooth erosion was conducted in eight databases. Two independent reviewers selected studies, abstracted information and assessed its quality. Data were abstracted for meta-analysis comparing tooth erosion in control patients (without eating disorders vs. patients with eating disorders; and patients with eating disorder risk behavior vs. patients without such risk behavior. Combined odds ratios (ORs and a 95% confidence interval (CI were obtained. RESULTS: Twenty-three papers were included in the qualitative synthesis and assessed by a modified version of the Newcastle-Ottawa Scale. Fourteen papers were included in the meta-analysis. Patients with eating disorders had more risk of tooth erosion (OR = 12.4, 95%CI = 4.1-37.5. Patients with eating disorders who self-induced vomiting had more risk of tooth erosion than those patients who did not self-induce vomiting (OR = 19.6, 95%CI = 5.6-68.8. Patients with risk behavior of eating disorder had more risk of tooth erosion than patients without such risk behavior (Summary OR = 11.6, 95%CI = 3.2-41.7. CONCLUSION: The scientific evidence suggests a causal relationship between tooth erosion and eating disorders and purging practices. Nevertheless, there is a lack of scientific evidence to fulfill the basic criteria of causation between the risk behavior for eating disorders and tooth erosion.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Is My Child at Risk for Early Childhood Tooth Decay? What is a Composite Resin (White Filling)? How Do I Care for My Child's Baby Teeth? Learn what those dental words mean. The Life ...

Sea urchin tooth mineralization: calcite present early in the aboral plumula.

Science.gov (United States)

Stock, Stuart R; Veis, Arthur; Xiao, Xianghui; Almer, Jonathan D; Dorvee, Jason R

2012-11-01

In both vertebrate bone, containing carbonated hydroxyapatite as the mineral phase, and in invertebrate hard tissue comprised of calcium carbonate, a popular view is that the mineral phase develops from a long-lived amorphous precursor which later transforms into crystal form. Important questions linked to this popular view are: when and where is the crystallized material formed, and is amorphous solid added subsequently to the crystalline substrate? Sea urchin teeth, in which the earliest mineral forms within isolated compartments, in a time and position dependent manner, allow direct investigation of the timing of crystallization of the calcite primary plates. Living teeth of the sea urchin Lytechinus variegatus, in their native coelomic fluid, were examined by high-energy synchrotron X-ray diffraction. The diffraction data show that calcite is present in the most aboral portions of the plumula, representing the very earliest stages of mineralization, and that this calcite has the same crystal orientation as in the more mature adoral portions of the same tooth. Raman spectroscopy of the aboral plumula confirms the initial primary plate mineral material is calcite and does not detect amorphous calcium carbonate; in the more mature adoral incisal flange, it does detect a broader calcite peak, consistent with two or more magnesium compositions. We hypothesize that some portion of each syncytial membrane in the plumula provides the information for nucleation of identically oriented calcite crystals that subsequently develop to form the complex geometry of the single crystal sea urchin tooth. Copyright © 2012 Elsevier Inc. All rights reserved.

Autogenous tooth transplantation for replacing a lost tooth: case reports

Directory of Open Access Journals (Sweden)

Ji-Youn Kang

2013-02-01

Full Text Available The autogenous tooth transplantation is an alternative treatment replacing a missing tooth when a suitable donor tooth is available. It is also a successful treatment option to save significant amount of time and cost comparing implants or conventional prosthetics. These cases, which required single tooth extraction due to deep caries and severe periodontal disease, could have good results by transplanting non-functional but sound donor tooth to the extraction site.

Nonsyndromic tooth agenesis patterns and associated developmental dental anomalies: a literature review with radiographic illustrations.

Science.gov (United States)

Agarwal, P; Vinuth, D P; Dube, G; Dube, P

2013-01-01

Tooth agenesis is one of the most intriguing phenomena, because it is frequently associated with other oral anomalies, structural variations and malformations of other teeth, late eruption, transposition and crowding. The diagnosis can be quite challenging as radiographic examination is critical for the diagnosis but not always possible and the late developing teeth may be sometimes scored developmentally missing. Accurate diagnosis therefore requires radiographic, clinical, and dental cast examinations. It is an important clinical and public health problem. Patients with missing permanent teeth may suffer from a reduced chewing ability, inarticulate pronunciation, and an unfavorable aesthetic appearance. Clinically, early diagnosis of a dental anomaly can alert the clinician to the possible development of other associated dental anomalies in the same patient or family, and avoid the possible sequelae. Understanding of tooth agenesis patterns and their impact on diagnosis, prevention, and eventually therapeutics are becoming integral parts of comprehensive dental care. Dental examination with radiographic screening of hypodontia in early childhood should be emphasized as part of public oral health policy to allow early diagnosis and timely intervention.

The Permian reptile Opisthodontosaurus carrolli: a model for acrodont tooth replacement and dental ontogeny.

Science.gov (United States)

Haridy, Yara; LeBlanc, Aaron R H; Reisz, Robert R

2018-03-01

Continuous tooth replacement is common for tetrapods, but some groups of acrodont lepidosaurs have lost the ability to replace their dentition (monophyodonty). Acrodonty, where the tooth attaches to the apex of the jawbone, is an unusual form of tooth attachment that has been associated with the highly autapomorphic condition of monophyodonty. Beyond Lepidosauria, very little is known about the relationship between acrodonty and monophyodonty in other amniotes. We test for this association with a detailed study of the dentition of Opisthodontosaurus, an unusual Early Permian captorhinid eureptile with acrodont dentition. We provide clear evidence, both histological and morphological, that there were regular tooth replacement events in the lower jaw of Opisthodontosaurus, similar to its captorhinid relatives. Thus, our study of the oldest known amniote with an acrodont dentition shows that acrodonty does not inhibit tooth replacement, and that many of the characteristics assigned to lepidosaurian acrodonty are actually highly derived features of lepidosaurs that have resulted secondarily from a lack of tooth replacement. In the context of reptilian dental evolution, we propose the retention of the simple definition of acrodonty, which only pertains to the relative position of the tooth at the apex of the jaw, where the jaw possesses equal lingual and labial walls. This definition of implantation therefore focuses solely on the spatial relationship between the tooth and the jawbone, and separates this relationship from tooth development and replacement. © 2017 Anatomical Society.

Autogenous tooth transplantation: an alternative to replace extracted tooth

Directory of Open Access Journals (Sweden)

David B. Kamadjaja

2015-09-01

Full Text Available Background: The gold standard treatment to replace missing tooth is dental implants, however, in certain cases, such as in young patients its placement is contraindicated. Autogenous tooth transplantation, which has been widely done in Scandinavian countries for many years, may become a good alternative to overcome this problem. Purpose: This article attempted to provide information about the indication, treatment planning, surgical technique and the successful result of autogenous tooth transplantation. Case: A fifteen year old male patient presented with large caries and periapical disease of his lower left first molar, which was partially erupted and the roots was not fully formed in radiograph. Case management: Autogenous tooth transplantation procedure was performed consisting of extraction of #36, odontectomy of #38 followed by its implantation to socket #36 and fixation of the transplanted tooth to the adjacent teeth. Post operative evaluation was done on regular basis within 18 months period. There was no complaint, the tooth was clinically stable and no evidence of periodontal problem. Serial radiographs showed healing of alveolar bone and periodontal tissue, and the complete root formation was evident by 18 months post operatively. Conclusion: Autogenous tooth transplantation is a potential alternative to replace extracted tooth. Provided that the case be properly planned and operation carefully performed, successful result of this treatment can be achieved.

Caspase-7 in molar tooth development

Czech Academy of Sciences Publication Activity Database

Matalová, Eva; Vanden Berghe, T.; Švandová, Eva; Vandenabeele, P.; Healy, C.; Sharpe, P. T.; Tucker, A. S.

2012-01-01

Roč. 57, č. 11 (2012), s. 1474-1481 ISSN 0003-9969 R&D Projects: GA AV ČR IAA600450904 Grant - others:GA ČR(CZ) GAP502/12/1285 Program:GA Institutional research plan: CEZ:AV0Z50450515 Keywords : tooth * apoptosis * mineralisation Subject RIV: FF - HEENT, Dentistry Impact factor: 1.549, year: 2012

Use of computed tomography to investigate cheek tooth abnormalities in chinchillas (Chinchilla laniger)

International Nuclear Information System (INIS)

Crossley, D.A.; Jackson, A.; Yates, J.; Boydell, I.P.

1998-01-01

Computerised tomographic scanning was used to investigate tooth structure in chinchillas (Chinchilla laniger), both cheek tooth crown and root abnormalities being common in this species. This paper describes a common form of dental disease affecting species with continuously growing teeth, with particular reference to the chinchilla, and confirms the potential role of computed tomography (CT) in its early diagnosis. CT imaging is compared with previously available methods of investigation which frequently fail to detect early pathological changes

The effect of buccal corticotomy on accelerating orthodontic tooth movement of maxillary canine

Directory of Open Access Journals (Sweden)

Mohammad Reza Jahanbakhshi

2016-01-01

Conclusion: Based on result of this study, corticotomy can accelerates the rate of orthodontic tooth movement about two times faster than conventional orthodontics and it is significant in early stages after surgical porsedure. Therefore Buccal corticotomy is a useful adjunct technique for accelerating orthodontic tooth movement.

Awareness of tooth grinding and clenching from adolescence to young adulthood: a nine-year follow-up

NARCIS (Netherlands)

Strausz, T.; Ahlberg, J.; Lobbezoo, F.; Restrepo, C.; Hublin, C.; Ahlberg, K.; Könönen, M.

2010-01-01

How bruxism develops from adolescence to early adulthood remains unclear. A previous database was revisited to evaluate the natural course of self-reported tooth grinding and clenching among young Finns aged 14-23 using four assessments. Overall, the self-reported frequencies of both grinding and

[Dental caries and early childhood development: a pilot study].

Science.gov (United States)

Núñez, F Loreto; Sanz, B Javier; Mejía, L Gloria

2015-01-01

To investigate the association between dental caries and early childhood development in 3-year-olds from Talca, Chile. A pilot study with a convenience sample of 3-year-olds from Talca (n = 39) who attend public healthcare centers. Child development was measured by the Psychomotor Development Index (PDI), a screening tool used nationally among pre-school children to assess language development, fine motor skills and coordination areas. Dental caries prevalence was evaluated by decayed, missing, filled teeth (DFMT) and decayed, missing, filled tooth surfaces (DFMS) ceo-d and ceo-s indexes. The children were divided into two groups according to the PDIscore: those with a score of 40 or more were considered developmentally normal (n = 32), and those with a score below 40 were considered as having impaired development (n = 7). The severity of caries (DMFT) was negatively correlated with PDI (r = -0.82), and children with the lowest TEPSI score had the highest DFMT values. The average DMFT in children with normal development was 1.31, and 3.57 for those with impaired development. This pilot study indicates that the severity of dental caries is correlated with early childhood development. Copyright © 2015. Publicado por Elsevier España, S.L.U.

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur.

Science.gov (United States)

Liu, Min; Reed, David A; Cecchini, Giancarlo M; Lu, Xuanyu; Ganjawalla, Karan; Gonzales, Carol S; Monahan, Richard; Luan, Xianghong; Diekwisch, Thomas G H

2016-01-01

Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here, we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids vs. snakes: (i) the orientation of replacement teeth compared to the major tooth axis, (ii) the occurrence of resorption pits, and (iii) the mode of tooth implantation/attachment to the tooth bearing element (TBE). The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as Heloderma. In

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur

Directory of Open Access Journals (Sweden)

Min eLiu

2016-05-01

Full Text Available Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids versus snakes: (i the orientation of replacement teeth compared to the major tooth axis, (ii the occurrence of resorption pits, and (iii the mode of tooth implantation/attachment to the tooth bearing element. The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as

A systematic review of the consequences of premature birth on palatal morphology, dental occlusion, tooth-crown dimensions, and tooth maturity and eruption.

Science.gov (United States)

Paulsson, Liselotte; Bondemark, Lars; Söderfeldt, Björn

2004-04-01

This systematic review addresses the question whether prematurity results in alteration of palatal morphology, dental occlusion, tooth-crown dimensions, and tooth maturation. A literature survey from the PubMed database covering the period from January 1966 to November 2002 used the Medical Subject Headings terms "infant, premature," and "infant, low birth weight" in combination with "jaws," "dental physiology," "dentition," and "tooth abnormalities." Controlled studies written in English and with definitions of premature birth according to the World Health Organization were selected. Two reviewers selected and extracted the data independently and also assessed the quality of the studies. The search strategy resulted in 113 articles, of which 13 met the inclusion criteria. Scientific evidence was found for altered palatal morphology in the short term among the premature children, and oral intubation was a contributing factor to the alterations. If corrected age was considered for the premature children, no delay in dental development and eruption was found compared with normally born children. Thus, the early birth of premature children must be taken in account when planning for orthodontic treatment. Because of the contradictory results and lack of longitudinal studies, the scientific evidence was too weak to answer the questions whether premature birth causes permanent alteration of palatal morphology, alteration of dental occlusion, and altered tooth-crown dimensions. To answer these questions and obtain reliable scientific evidence whether premature children are at risk for malocclusions from possible alterations of palatal morphology such as asymmetry and high arched palates, further well-designed controlled studies as well as longitudinal studies are needed.

Tooth enamel as a naturtal beta dosemeter for bone seeking radionuclides

International Nuclear Information System (INIS)

Wieser, A.; Petzoldt, G.

1996-01-01

EPR dosimetry was done on teeth from residents of villages along the Techa river, Southern Urals, Russia. The residents have a 90 Sr body burden due to massive releases of liquid nuclear waste into the Techa river in the early fifties. A long time after ingestion, strontium is only incorporated into the skeleton and dentine of the adults but not in tooth enamel. Tooth enamel therefore, is measuring the beta dose from the contaminated dentine. Based on experimental data of this study a first approximation of the ingestion dose coefficient of tooth enamel was found to be more than 5 times lower than the value given in ICRP 69 for the bone surface of the skeleton. A similar difference was found earlier for the dose absorbed in tooth enamel and dentine. The result of this study allows the supposition that that the metabolism of strontium is very very similar for tooth dentine and the skeleton. (author)

Promoting positive health behaviours--'tooth worm' phenomenon and its implications.

Science.gov (United States)

Gao, X L; Hsu, C Y S; Xu, Y C; Loh, T; Koh, D; Hwarng, H B

2012-03-01

'Tooth worm' is a traditional belief about the pathogen of dental caries (tooth decay). Nevertheless, in our previous study, parental 'tooth worm' belief was linked to a reduced caries risk of their children. This study aimed to further characterize the impact of parental 'tooth worm' belief on their children's caries experience and its psychobehavioural mechanisms. analytic observational study. Thirteen randomly selected kindergartens in Singapore. 1,782 preschoolers aged 3-6 years. Each child received an oral examination and microbiological tests. Parents completed a self-administered questionnaire on their socio-demographic background, oral health knowledge/attitude and child's oral health habits. Multivariate analysis confirmed a reduced chance of 'high caries rate' (number of affected teeth > 2) among children whose parents held the 'tooth worm' belief (Odds Ratio = 0.41; 95% Confidence Interval = 0.19-0.89). With such perception among parents, children brushed their teeth more frequently (p = 0.042). Since no difference in oral hygiene was observed, the health benefit of the "tooth worm" perception may be acquired through the delivery of fluoride (an agent with proven anti-caries effect) during frequent toothbrushing episodes. This study revealed a 'tooth worm' phenomenon, indicating that parental 'tooth worm' belief is associated with early establishment of regular toothbrushing habit and reduction of dental caries in children. This phenomenon and its psychobehavioural mechanisms, enriching our understanding of oral health behaviours, have implications for effective health education.

Development of Plastic Gear for Power Transmission : Abnormal Wear on the Tooth Root and Tooth Fracture near Pitch Point

OpenAIRE

Terashima, Kenichi; Tsukamoto, Naohisa; Nishida, Noriteru; Shi, Jiasun

1986-01-01

Plastic gears have many excellent characteristics which are locking in metallic gears, such as corrosion resistance, self-lubrication, quiet running, and so forth. The meshing behavior of plastic gears is very different from that of metallic gears. Therefore, the life estimation is very difficult for plastic gears. In this paper, generating and growing mechanisms of abnormal wear which appears fatally near the root of plastic tooth are analyzed, and then it is clarified that tooth fractures w...

Computer simulation of gear tooth manufacturing processes

Science.gov (United States)

Mavriplis, Dimitri; Huston, Ronald L.

1990-01-01

The use of computer graphics to simulate gear tooth manufacturing procedures is discussed. An analytical basis for the simulation is established for spur gears. The simulation itself, however, is developed not only for spur gears, but for straight bevel gears as well. The applications of the developed procedure extend from the development of finite element models of heretofore intractable geometrical forms, to exploring the fabrication of nonstandard tooth forms.

Dental complications of rickets in early childhood: case report on 2 young girls.

Science.gov (United States)

Davit-Béal, Tiphaine; Gabay, Julie; Antoniolli, Pauline; Masle-Farquhar, Jeanne; Wolikow, Maryse

2014-04-01

Vitamin D is an essential hormone for calcium gut absorption. It is also involved in child growth, cancer prevention, immune system responses, and tooth formation. Due to inadequate vitamin D intake and/or decreased sunlight exposure, vitamin D deficiency has resurfaced in developed countries despite known inexpensive and effective preventive methods. Vitamin D deficiency is a common cause of rickets, a condition that affects bone development in children and that can have serious dental complications. Deficiency during pregnancy can cause enamel hypoplasia of primary teeth. Enamel regeneration is currently impossible; hypoplasia is therefore irreversible, and once affected, teeth are prone to fast caries development. Deficiency during early childhood can affect permanent teeth and ensuing caries can sometimes lead to tooth loss at a young age. Oral manifestations of rickets should be diagnosed early by both physicians and dentists to prevent severe dental complications. This case study presents 2 young girls with rickets in early childhood who suffered from subsequent serious tooth decay.

Confocal microscopic observation of structural changes in glass-ionomer cements and tooth interfaces.

Science.gov (United States)

Watson, T F; Pagliari, D; Sidhu, S K; Naasan, M A

1998-03-01

This study aimed to develop techniques to allow dynamic imaging of a cavity before, during and after placement of glass-ionomer restorative materials. Cavities were cut in recently extracted third molars and the teeth longitudinally sectioned. Each hemisected tooth surface was placed in green modelling compound at 90 to the optical axis of the microscope. The cavity surface was imaged using a video rate confocal microscope in conjunction with an internally focusable microscope objective. The sample on the stage was pushed up to the objective lens which 'clamped' the cover glass onto it. Water, glycerine or oil was placed below the coverglass, with oil above. Internal tooth structures were imaged by changing the internal focus of the objective. The restorative material was then placed into the cavity. Video images were stored either onto video tape or digitally, using a frame grabber, computer and mass memory storage. Software controls produced time-lapse recordings of the interface over time. Preliminary experiments have examined the placement and early maturation of conventional glass-ionomer cements and a syringeable resin-modified glass-ionomer cement. Initial contact of the cement matrix and glass particles was visible as the plastic material rolled past the enamel and dentine, before making a bond. Evidence for water movement from the dentine into the cement has also been seen. After curing, the early dimensional changes in the cements due to water flux were apparent using the time-lapse facility. This new technique enables examination of developing tooth/restoration interfaces and the tracking of movement in materials.

Tooth anatomy

Science.gov (United States)

... whole tooth. This area is known as the "pulp" of the tooth. The jawbone is attached to ... JC, eds. Robbins and Cotran Pathologic Basis of Disease . 9th ed. Philadelphia, PA: Elsevier Saunders; 2015:chap ...

Distribution of Cathepsin K in Late Stage of Tooth Germ Development and Its Function in Degrading Enamel Matrix Proteins in Mouse.

Directory of Open Access Journals (Sweden)

Tao Jiang

Full Text Available Cathepsin K (CTSK is a member of cysteine proteinase family, and is predominantly expressed in osteoclastsfor degradationof bone matrix proteins. Given the similarity in physical properties of bone and dental mineralized tissues, including enamel, dentin and cementum, CTSK is likely to take part in mineralization process during odontogenesis. On the other hand, patients with pycnodysostosis caused by mutations of the CTSK gene displayedmultipledental abnormalities, such as hypoplasia of the enamel, obliterated pulp chambers, hypercementosis and periodontal disease. Thereforeitis necessary to study the metabolic role of CTSK in tooth matrix proteins. In this study, BALB/c mice at embryonic day 18 (E18, post-natal day 1 (P1, P5, P10 and P20 were used (5 mice at each time pointfor systematic analyses of CTSK expression in the late stage of tooth germ development. We found that CTSK was abundantly expressed in the ameloblasts during secretory and maturation stages (P5 and P10 by immunohistochemistry stainings.During dentinogenesis, the staining was also intense in the mineralization stage (P5 and P10,but not detectable in the early stage of dentin formation (P1 and after tooth eruption (P20.Furthermore, through zymography and digestion test in vitro, CTSK was proved to be capable of hydrolyzing Emdogain and also cleaving Amelogenininto multiple products. Our resultsshed lights on revealing new functions of CTSK and pathogenesis of pycnodysostosis in oral tissues.

Development and microstructure of tooth histotypes in the blue shark, Prionace glauca (Carcharhiniformes: Carcharhinidae) and the great white shark, Carcharodon carcharias (Lamniformes: Lamnidae).

Science.gov (United States)

Moyer, Joshua K; Riccio, Mark L; Bemis, William E

2015-07-01

Elasmobranchs exhibit two distinct arrangements of mineralized tissues in the teeth that are known as orthodont and osteodont histotypes. Traditionally, it has been said that orthodont teeth maintain a pulp cavity throughout tooth development whereas osteodont teeth are filled with osteodentine and lack a pulp cavity when fully developed. We used light microscopy, scanning electron microscopy, and high-resolution micro-computed tomography to compare the structure and development of elasmobranch teeth representing the two histotypes. As an example of the orthodont histotype, we studied teeth of the blue shark, Prionace glauca (Carcharhiniformes: Carcharhinidae). For the osteodont histotype, we studied teeth of the great white shark, Carcharodon carcharias (Lamniformes: Lamnidae). We document similarities and differences in tooth development and the microstructure of tissues in these two species and review the history of definitions and interpretations of elasmobranch tooth histotypes. We discuss a possible correlation between tooth histotype and tooth replacement and review the history of histotype differentiation in sharks. We find that contrary to a long held misconception, there is no orthodentine in the osteodont teeth of C. carcharias. © 2015 Wiley Periodicals, Inc.

Treatment outcome of immediate, early and conventional single-tooth implants in the aesthetic zone : a systematic review to survival, bone level, soft-tissue, aesthetics and patient satisfaction

NARCIS (Netherlands)

den Hartog, Laurens; Huddleston Slater, James J. R.; Vissink, Arjan; Meijer, Henny J. A.; Raghoebar, Gerry M.

2008-01-01

den Hartog L, Huddleston Slater JJR, Vissink A, Meijer HJA, Raghoebar GM. Treatment outcome of immediate, early and conventional single-tooth implants in the aesthetic zone: a systematic review to survival, bone level, soft-tissue, aesthetics and patient satisfaction. J Clin Periodontol 2008; 35:

Tooth wear and wear investigations in dentistry.

Science.gov (United States)

Lee, A; He, L H; Lyons, K; Swain, M V

2012-03-01

Tooth wear has been recognised as a major problem in dentistry. Epidemiological studies have reported an increasing prevalence of tooth wear and general dental practitioners see a greater number of patients seeking treatment with worn dentition. Although the dental literature contains numerous publications related to management and rehabilitation of tooth wear of varying aetiologies, our understanding of the aetiology and pathogenesis of tooth wear is still limited. The wear behaviour of dental biomaterials has also been extensively researched to improve our understanding of the underlying mechanisms and for the development of restorative materials with good wear resistance. The complex nature of tooth wear indicates challenges for conducting in vitro and in vivo wear investigations and a clear correlation between in vitro and in vivo data has not been established. The objective was to critically review the peer reviewed English-language literature pertaining to prevalence and aetiology of tooth wear and wear investigations in dentistry identified through a Medline search engine combined with hand-searching of the relevant literature, covering the period between 1960 and 2011. © 2011 Blackwell Publishing Ltd.

Proteomic analysis of human tooth pulp: proteomics of human tooth.

Science.gov (United States)

Eckhardt, Adam; Jágr, Michal; Pataridis, Statis; Mikšík, Ivan

2014-12-01

The unique pulp-dentin complex demonstrates strong regenerative potential, which enables it to respond to disease and traumatic injury. Identifying the proteins of the pulp-dentin complex is crucial to understanding the mechanisms of regeneration, tissue calcification, defense processes, and the reparation of dentin by dental pulp. The lack of knowledge of these proteins limits the development of more efficient therapies. The proteomic profile of human tooth pulp was investigated and compared with the proteome of human dentin and blood. The samples of tooth pulp were obtained from 5 sound permanent human third molars of 5 adults (n = 5). The extracted proteins were separated by 2-dimensional gel electrophoresis, analyzed by nano-liquid chromatography tandem mass spectrometry, and identified by correlating mass spectra to the proteomic databases. A total of 342 proteins were identified with high confidence, and 2 proteins were detected for the first time in an actual human sample. The identified tooth pulp proteins have a variety of functions: structural, catalytic, transporter, protease activity, immune response, and many others. In a comparison with dentin and blood plasma, 140 (pulp/dentin) shared proteins were identified, 37 of which were not observed in plasma. It can be suggested that they might participate in the unique pulp-dentin complex. This proteomic investigation of human tooth pulp, together with the previously published study of human dentin, is one of the most comprehensive proteome lists of human teeth to date. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Remineralising efficacy of tooth mousse plus (ACP CCPF) on radiated tooth

International Nuclear Information System (INIS)

Priya; Hegde, Mithra N.; Hegde, Nidarsh D.; Suchetha Kumari, N.; Sanjeev, Ganesh

2016-01-01

Dental complication is the common problem faced all over the world. Subjects with poor oral hygiene and patients undergoing radiotherapy for oral cancers are developing signs of decalcification of enamel, lesions and Caries. A well designed treatment is necessary to safeguard the tooth enamel surface before and after radiation, only then the caries on the enamel surface can be arrested by re-hardening it and ultimately converting them to the normal healthy condition. To determine the Annealing effect of radiated tooth by testing maximum micro hardness of the teeth before and after 30 days of radiation by the application of Remineralising agents. In our study, we collected 30 intact caries free human molar teeth and were sectioned mesio-distally

Failure of tooth eruption in two patients with cerebral palsy and bruxism-a 10-year follow-up: a case report.

Science.gov (United States)

Staufer, Kirsten; Hamadeh, Sinan; Gesch, Dietmar

2009-01-01

The aim of this paper was to analyze delayed tooth eruption in two children with cerebral palsy who had severe bruxism and to determine whether treatment could influence tooth eruption and alignment. Extraction of primary teeth was carried out and orthodontic treatment was considered due to severe tooth wear of primary teeth, lack of space, and development of a class III malocclusion. Analysis was based on clinical examination, photographs, radiographs, and dental casts. In both patients, early mixed dentition was delayed for more than 5 years. Calcification and root development of posterior permanent teeth corresponded with the chronological age. Root resorption of the severely abraded primary teeth and eruption of their successors were delayed or failed. Eruption of permanent teeth occurred slowly after primary teeth were extracted. Orthodontic treatment succeeded in one patient, achieving a normal overjet in combination with a successful orofacial therapy. The disturbed exfoliation of abraded primary teeth and failure of tooth eruption of the posterior teeth could be linked to the systemic pathology and to bruxism. At age 20, eruption of the canines and premolars remained questionable.

Tooth wear

Directory of Open Access Journals (Sweden)

Tušek Ivan

2014-01-01

Full Text Available Tooth wear is the loss of dental hard tissue that was not caused by decay and represents a common clinical problem of modern man. In the etiology of dental hard tissue lesions there are three dominant mechanisms that may act synergistically or separately:friction (friction, which is caused by abrasion of exogenous, or attrition of endogenous origin, chemical dissolution of dental hard tissues caused by erosion, occlusal stress created by compression and flexion and tension that leads to tooth abfraction and microfracture. Wear of tooth surfaces due to the presence of microscopic imperfections of tooth surfaces is clinically manifested as sanding veneers. Tribology, as an interdisciplinary study of the mechanisms of friction, wear and lubrication at the ultrastructural level, has defined a universal model according to which the etiopathogenesis of tooth wear is caused by the following factors: health and diseases of the digestive tract, oral hygiene, eating habits, poor oral habits, bruxism, temporomandibular disorders and iatrogenic factors. Attrition and dental erosion are much more common in children with special needs (Down syndrome. Erosion of teeth usually results from diseases of the digestive tract that lead to gastroesophageal reflux (GER of gastric juice (HCl. There are two basic approaches to the assessment of the degree of wear and dental erosion. Depending on the type of wear (erosion, attrition, abfraction, the amount of calcium that was realised during the erosive attack could be determined qualitatively and quantitatively, or changes in optical properties and hardness of enamel could be recorded, too. Abrasion of teeth (abrasio dentium is the loss of dental hard tissue caused by friction between the teeth and exogenous foreign substance. It is most commonly provoked by prosthetic dentures and bad habits, while its effect depends on the size of abrasive particles and their amount, abrasive particle hardness and hardness of tooth

Quantitative analysis of fluoride-induced hypermineralization of developing enamel in neonatal hamster tooth germs

Science.gov (United States)

Tros, G. H. J.; Lyaruu, D. M.; Vis, R. D.

1993-10-01

A procedure was developed for analysing the effect of fluoride on mineralization in the enamel of neonatal hamster molars during amelogenesis by means of the quantitative determination of the mineral content. In this procedure the distribution of calcium and mineral concentration was determined in sections containing developing tooth enamel mineral embedded in an organic epoxy resin matrix by means of the micro-PIXE technique. This allowed the determination of the calcium content along preselected tracks with a spatial resolution of 2 μm using a microprobe PIXE setup with a 3 MeV proton beam of 10 to 50 pA with a spot size of 2 μm in the track direction. In this procedure the X-ray yield is used as a measure for the calcium content. The thickness of each sample section is determined independently by measuring the energy loss of α-particles from a calibration source upon passing through the sample. The sample is considered as consisting of two bulk materials, allowing the correction for X-ray self-absorption and the calculation of the calcium concentration. The procedure was applied for measuring the distribution of mineral concentration in 2 μm thick sections taken from tooth germs of hamsters administered with NaF. The measurements indicated that a single intraperitoneal administration of 20 mg NaF/kg body weight to 4-to-5-day-old hamsters leads within 24 h to hypermineralization of certain focal enamel surface areas containing cystic lesions under transitional and early secretory ameloblasts. The mineral concentration there is substantially increased due to the fluoride treatment (35%, instead of 5 to 10% as in the controls), indicating that the normal mineralization process has been seriously disturbed. Furthermore it is found that using this technique the mineral concentration peaks at about 70% at the dentine-enamel junction, which is comparable to that reported for human dentine using other techniques.

Accelerated tooth eruption in children with diabetes mellitus.

Science.gov (United States)

Lal, Shantanu; Cheng, Bin; Kaplan, Selma; Softness, Barney; Greenberg, Ellen; Goland, Robin S; Lalla, Evanthia; Lamster, Ira B

2008-05-01

The objective of this study was to evaluate tooth eruption in 6- to 14-year-old children with diabetes mellitus. Tooth eruption status was assessed for 270 children with diabetes and 320 control children without diabetes. Data on important diabetes-related variables were collected. Analyses were performed using logistic regression models. Children with diabetes exhibited accelerated tooth eruption in the late mixed dentition period (10-14 years of age) compared to healthy children. For both case patients and control subjects the odds of a tooth being in an advanced eruptive stage were significantly higher among girls than boys. There was also a trend associating gingival inflammation with expedited tooth eruption in both groups. No association was found between the odds of a tooth being in an advanced stage of eruption and hemoglobin A(1c) or duration of diabetes. Patients with higher body mass index percentile demonstrated statistically higher odds for accelerated tooth eruption, but the association was not clinically significant. Children with diabetes exhibit accelerated tooth eruption. Future studies need to ascertain the role of such aberrations in dental development and complications such as malocclusion, impaired oral hygiene, and periodontal disease. The standards of care for children with diabetes should include screening and referral programs aimed at oral health promotion and disease prevention.

Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

Directory of Open Access Journals (Sweden)

M Aleksander Wysocki

Full Text Available Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month. Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo. Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

Science.gov (United States)

Wysocki, M Aleksander; Feranec, Robert S; Tseng, Zhijie Jack; Bjornsson, Christopher S

2015-01-01

Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month). Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo). Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

Pre-existing Periapical Inflammatory Condition Exacerbates Tooth Extraction–induced BRONJ Lesions in Mice

Science.gov (United States)

Song, Minju; Alshaikh, Abdullah; Kim, Terresa; Kim, Sol; Dang, Michelle; Mehrazarin, Shebli; Shin, Ki-Hyuk; Kang, Mo; Park, No-Hee; Kim, Reuben H.

2016-01-01

Introduction Surgical interventions such as tooth extraction increase a chance of developing osteonecrosis of the jaw (ONJ) in patients receiving bisphosphonates (BPs) for treatment of bone-related diseases. Tooth extraction is often performed to eliminate pre-existing pathological inflammatory conditions that make the tooth unsalvageable; however, the role of such conditions on bisphosphonate-related ONJ (BRONJ) development following tooth extraction is not clearly defined. Here, we examined the effects of periapical periodontitis on tooth extraction-induced BRONJ development in mice. Methods Periapical periodontitis was induced by exposing the pulp of the maxillary first molar for 3 weeks in C57/BL6 mice that were intravenously administered with BP. The same tooth was extracted, and after 3 additional weeks, the mice were harvested for histological, histomorphometric, and histochemical staining analyses. Results Pulp exposure induced periapical radiolucency as demonstrated by increased inflammatory cells, TRAP+ osteoclasts, and bone resorption. When BP was administered, pulp exposure did not induce apical bone resorption despite the presence of inflammatory cells and TRAP+ osteoclasts. While tooth extraction alone induced BRONJ lesions, pulp exposure further increased tooth extraction-induced BRONJ development as demonstrated by the presence of more bone necrosis. Conclusion Our study demonstrates that pre-existing pathological inflammatory condition such as periapical periodontitis is a predisposing factor that may exacerbate BRONJ development following tooth extraction. Our study further provides a clinical implication whereby periapical periodontitis should be controlled before performing tooth extraction in BP-users in order to reduce the risk of developing BRONJ. PMID:27637460

Evaluation of autogenous tooth transplantation for replacement of the missing or unrestorable mandibular molar tooth

Directory of Open Access Journals (Sweden)

Wahiduj Jaman

2017-06-01

Full Text Available This study was undertaken to evaluate the functional and occlusal stability of autogenous tooth transplantation. A total of 30 patients were included. Among them, 21 participants received transplanted first molar and the remaining 9 received transplanted second molar. In all the cases, donor tooth were third molar. In each participant, extraction of un-restorable first or second molar tooth was performed which was then replaced by atrumatic extracted third molar tooth. Each third molar tooth was placed in the recipient extracted socket, followed by the evaluation of the occlusion and then stabilized with arch bar and ligature wire. Clinical follow-up evaluation was performed at 15 days, 3 and 12 months in respect to occlusal stability, tooth mobility and periodontal status. It was found that 23 transplanted tooth were successful and the remaining 7 tooth need long-term observation for the final outcome, which was statistically significant. It can be concluded that the autogenous tooth transplantation can replace missing tooth to ensure the preservation of function, aesthetic and to prevent bone resorption of the missing area of the jaw, which can lead to exceptional esthetic and functional outcome.

The timing of tooth eruption and root development of permanent canine and premolars in Korean children

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chang Shin; Jung, Yun Hoa; Cho, Bong Hae [Department of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Pusan (Korea, Republic of)

2010-09-15

The aim of this study was to investigate the timing and sequence of eruption of permanent canine and premolars, and to evaluate tooth calcification stage on emergence in Korean children. The sample was comprised of 1,266 children (male 720, female 546) aged from 7-13 years. Tooth eruption and calcification stages were determined through oral and panoramic radiographic examination, respectively. Probit analysis was used to calculate the timing of tooth eruption and tooth calcification stage from these cross-sectional data. In both males and females, eruption occurred around the time when one third of tooth root or more was formed. The sequence was as follows: first premolar, canine, and second premolar in maxilla, and canine, first premolar and second premolar in mandible. Tooth eruption occurred earlier in girls compared with boys, averaging 0.63 years. Eruption sequence is identical in males and females with a trend for females to erupt earlier than males. Tooth eruption becomes earlier over the past decades in Korean children.

The timing of tooth eruption and root development of permanent canine and premolars in Korean children

International Nuclear Information System (INIS)

Cheong, Chang Shin; Jung, Yun Hoa; Cho, Bong Hae

2010-01-01

The aim of this study was to investigate the timing and sequence of eruption of permanent canine and premolars, and to evaluate tooth calcification stage on emergence in Korean children. The sample was comprised of 1,266 children (male 720, female 546) aged from 7-13 years. Tooth eruption and calcification stages were determined through oral and panoramic radiographic examination, respectively. Probit analysis was used to calculate the timing of tooth eruption and tooth calcification stage from these cross-sectional data. In both males and females, eruption occurred around the time when one third of tooth root or more was formed. The sequence was as follows: first premolar, canine, and second premolar in maxilla, and canine, first premolar and second premolar in mandible. Tooth eruption occurred earlier in girls compared with boys, averaging 0.63 years. Eruption sequence is identical in males and females with a trend for females to erupt earlier than males. Tooth eruption becomes earlier over the past decades in Korean children.

Uneven distribution of enamel in the tooth crown of a Plains Zebra (Equus quagga

Directory of Open Access Journals (Sweden)

Daniela E. Winkler

2015-06-01

Full Text Available Unworn teeth of herbivorous mammals are not immediately functional. They have to be partially worn to expose enamel ridges which can then act as shear-cutting blades to break the food down. We use the Plains Zebra (Equus quagga as a hypsodont, herbivorous model organism to investigate how initial wear of the tooth crown is controlled by underlying structures. We find that the enamel proportion is smaller at the apical half of the tooth crown in all upper tooth positions and suggest that lower enamel content here could promote early wear. Besides this uneven enamel distribution, we note that the third molar has a higher overall enamel content than any other tooth position. The M3 is thus likely to have a slightly different functional trait in mastication, resisting highest bite forces along the tooth row and maintaining functionality when anterior teeth are already worn down.

Uneven distribution of enamel in the tooth crown of a Plains Zebra (Equus quagga).

Science.gov (United States)

Winkler, Daniela E; Kaiser, Thomas M

2015-01-01

Unworn teeth of herbivorous mammals are not immediately functional. They have to be partially worn to expose enamel ridges which can then act as shear-cutting blades to break the food down. We use the Plains Zebra (Equus quagga) as a hypsodont, herbivorous model organism to investigate how initial wear of the tooth crown is controlled by underlying structures. We find that the enamel proportion is smaller at the apical half of the tooth crown in all upper tooth positions and suggest that lower enamel content here could promote early wear. Besides this uneven enamel distribution, we note that the third molar has a higher overall enamel content than any other tooth position. The M3 is thus likely to have a slightly different functional trait in mastication, resisting highest bite forces along the tooth row and maintaining functionality when anterior teeth are already worn down.

Natural Tooth Pontic: An Instant Esthetic Option for Periodontally Compromised Teeth—A Case Series

Directory of Open Access Journals (Sweden)

Rishi Raj

2016-01-01

Full Text Available Sudden tooth loss in the esthetic zone of the maxillary or mandibular anterior region can be due to trauma, periodontal disease, or endodontic failure. The treatment options for replacing the missing tooth can vary between removable prosthesis, tooth-supported prosthesis, and implant-supported prosthesis. Irrespective of the final treatment, the first line of management would be to provisionally restore the patient’s esthetic appearance at the earliest, while functionally stabilizing the compromised arch. Using the patient’s own natural tooth as a pontic offers the benefits of being the right size, shape, and color and provides exact repositioning in its original intraoral three-dimensional position. Additionally, using the patient’s platelet concentrate (platelet rich fibrin facilitates early wound healing and preservation of alveolar ridge shape following tooth extraction. The abutment teeth can also be preserved with minimal or no preparation, thus keeping the technique reversible, and can be completed at the chair side thereby avoiding laboratory costs. This helps the patient better tolerate the effect of tooth loss psychologically. The article describes a successful, immediate, and viable technique for rehabilitation of three different patients requiring replacement of a single periodontally compromised tooth in an esthetic region.

Stem cells for tooth engineering

Directory of Open Access Journals (Sweden)

G Bluteau

2008-07-01

Full Text Available Tooth development results from sequential and reciprocal interactions between the oral epithelium and the underlying neural crest-derived mesenchyme. The generation of dental structures and/or entire teeth in the laboratory depends upon the manipulation of stem cells and requires a synergy of all cellular and molecular events that finally lead to the formation of tooth-specific hard tissues, dentin and enamel. Although mesenchymal stem cells from different origins have been extensively studied in their capacity to form dentin in vitro, information is not yet available concerning the use of epithelial stem cells. The odontogenic potential resides in the oral epithelium and thus epithelial stem cells are necessary for both the initiation of tooth formation and enamel matrix production. This review focuses on the different sources of stem cells that have been used for making teeth in vitro and their relative efficiency. Embryonic, post-natal or even adult stem cells were assessed and proved to possess an enormous regenerative potential, but their application in dental practice is still problematic and limited due to various parameters that are not yet under control such as the high risk of rejection, cell behaviour, long tooth eruption period, appropriate crown morphology and suitable colour. Nevertheless, the development of biological approaches for dental reconstruction using stem cells is promising and remains one of the greatest challenges in the dental field for the years to come.

Mathematical description of tooth flank surface of globoidal worm gear with straight axial tooth profile

Science.gov (United States)

Połowniak, Piotr; Sobolak, Mariusz

2017-12-01

In this article, a mathematical description of tooth flank surface of the globoidal worm and worm wheel generated by the hourglass worm hob with straight tooth axial profile is presented. The kinematic system of globoidal worm gear is shown. The equation of globoid helix and tooth axial profile of worm is derived to determine worm tooth surface. Based on the equation of meshing the contact lines are obtained. The mathematical description of globoidal worm wheel tooth flank is performed on the basis of contact lines and generating the tooth side by the extreme cutting edge of worm hob. The presented mathematical model of tooth flank of TA worm and worm wheel can be used e.g. to analyse the contact pattern of the gear.

Tooth - abnormal colors

Science.gov (United States)

... medlineplus.gov/ency/article/003065.htm Tooth - abnormal colors To use the sharing features on this page, please enable JavaScript. Abnormal tooth color is any color other than white to yellowish- ...

Functional constraints on tooth morphology in carnivorous mammals

Directory of Open Access Journals (Sweden)

Smits Peter D

2012-08-01

Full Text Available Abstract Background The range of potential morphologies resulting from evolution is limited by complex interacting processes, ranging from development to function. Quantifying these interactions is important for understanding adaptation and convergent evolution. Using three-dimensional reconstructions of carnivoran and dasyuromorph tooth rows, we compared statistical models of the relationship between tooth row shape and the opposing tooth row, a static feature, as well as measures of mandibular motion during chewing (occlusion, which are kinetic features. This is a new approach to quantifying functional integration because we use measures of movement and displacement, such as the amount the mandible translates laterally during occlusion, as opposed to conventional morphological measures, such as mandible length and geometric landmarks. By sampling two distantly related groups of ecologically similar mammals, we study carnivorous mammals in general rather than a specific group of mammals. Results Statistical model comparisons demonstrate that the best performing models always include some measure of mandibular motion, indicating that functional and statistical models of tooth shape as purely a function of the opposing tooth row are too simple and that increased model complexity provides a better understanding of tooth form. The predictors of the best performing models always included the opposing tooth row shape and a relative linear measure of mandibular motion. Conclusions Our results provide quantitative support of long-standing hypotheses of tooth row shape as being influenced by mandibular motion in addition to the opposing tooth row. Additionally, this study illustrates the utility and necessity of including kinetic features in analyses of morphological integration.

Ontogenetic Tooth Reduction in Stenopterygius quadriscissus (Reptilia: Ichthyosauria: Negative Allometry, Changes in Growth Rate, and Early Senescence of the Dental Lamina.

Directory of Open Access Journals (Sweden)

Daniel G Dick

Full Text Available We explore the functional, developmental, and evolutionary processes which are argued to produce tooth reduction in the extinct marine reptile Stenopterygius quadriscissus (Reptilia: Ichthyosauria. We analyze the relationship between mandible growth and tooth size, shape, and count, to establish an ontogenetic trend. The pattern in S. quadriscissus is consistent with hypotheses of tooth size reduction by neutral selection, and this unusual morphology (a functionally edentulous rostrum was produced by a series of different evolutionary developmental changes that are known for other taxa showing tooth reduction and loss. Specifically, this species evolved functional edentulism by evolutionary changes in the growth allometry of the dentition and by altering growth rates through ontogeny. This observation supports previous hypotheses that S. quadriscissus underwent ontogenetic tooth reduction. Tooth reduction in S. quadriscissus may be caused by unique selective pressures resulting from prey choice and feeding behavior, expanding our current understanding of the mechanisms producing tooth reduction.

Prenatal ultrasound and postmortem histologic evaluation of tooth germs: an observational, transversal study.

Science.gov (United States)

Seabra, Mariana; Felino, António; Nogueira, Rosete; Valente, Francisco; Braga, Ana Cristina; Vaz, Paula

2015-05-12

Hypodontia is the most frequent developmental anomaly of the orofacial complex, and its detection in prenatal ultrasound may indicate the presence of congenital malformations, genetic syndromes and chromosomal abnormalities. To date, only a few studies have evaluated the histological relationship of human tooth germs identified by two-dimensional (2D) ultrasonography. In order to analyze whether two-dimensional ultrasonography of tooth germs may be successfully used for identifying genetic syndromes, prenatal ultrasound images of fetal tooth germs obtained from a Portuguese population sample were compared with histological images obtained from fetal autopsies. Observational, descriptive, transversal study. The study protocol followed the ethical principles outlined by the Helsinki Declaration and was approved by the Ethics Committee of the School of Dental Medicine, University of Porto (FMDUP, Porto, Portugal) and of the Centro Hospitalar de Vila Nova de Gaia/Espinho (CHVNG/EPE, Porto, Portugal) as well as by the CGC Genetics Embryofetal Pathology Laboratory. Eighty-five fetuses examined by prenatal ultrasound screening from May 2011 to August 2012 had an indication for autopsy following spontaneous fetal death or medical termination of pregnancy. Of the 85 fetuses, 37 (43.5%) were randomly selected for tooth germ evaluation by routine histopathological analysis. Fetuses who were up to 30 weeks of gestation, and whose histological pieces were not representative of all maxillary tooth germs was excluded. Twenty four fetus between the 13(th) and 30(th) weeks of gestation fulfilled the parameters to autopsy. Twenty four fetuses were submitted to histological evaluation and were determined the exact number, morphology, and mineralization of their tooth germs. All tooth germs were identifiable with ultrasonography as early as the 13(th) week of gestation. Of the fetuses autopsied, 41.7% had hypodontia (29.1% maxillary hypodontia and 20.9% mandibular hypodontia). This

Scales and tooth whorls of ancient fishes challenge distinction between external and oral 'teeth'.

Directory of Open Access Journals (Sweden)

Qingming Qu

Full Text Available The debate about the origin of the vertebrate dentition has been given fresh fuel by new fossil discoveries and developmental studies of extant animals. Odontodes (teeth or tooth-like structures can be found in two distinct regions, the 'internal' oropharyngeal cavity and the 'external' skin. A recent hypothesis argues that regularly patterned odontodes is a specific oropharyngeal feature, whereas odontodes in the external skeleton lack this organization. However, this argument relies on the skeletal system of modern chondrichthyans (sharks and their relatives, which differ from other gnathostome (jawed vertebrate groups in not having dermal bones associated with the odontodes. Their external skeleton is also composed of monoodontode 'placoid scales', whereas the scales of most early fossil gnathostomes are polyodontode, i.e. constructed from several odontodes on a shared bony base. Propagation phase contrast X-ray Synchrotron microtomography (PPC-SRµCT is used to study the polyodontode scales of the early bony fish Andreolepis hedei. The odontodes constructing a single scale are reconstructed in 3D, and a linear and regular growth mechanism similar to that in a gnathostome dentition is confirmed, together with a second, gap-filling growth mechanism. Acanthodian tooth whorls are described, which show that ossification of the whorl base preceded and probably patterned the development of the dental lamina, in contrast to the condition in sharks where the dental lamina develops early and patterns the dentition.The new findings reveal, for the first time, how polyodontode scales grow in 3D in an extinct bony fish. They show that dentition-like odontode patterning occurs on scales and that the primary patterning unit of a tooth whorl may be the bony base rather than the odontodes it carries. These results contradict the hypothesis that oropharyngeal and external odontode skeletons are fundamentally separate and suggest that the importance of dermal

Electron paramagnetic resonance biophysical radiation dosimetry with tooth enamel

International Nuclear Information System (INIS)

Khan, Rao F.H.

2003-01-01

This thesis deals with the advancements made in the field of Electron Paramagnetic Resonance (EPR) for biophysical dosimetry with tooth enamel for accident, emergency, and retrospective radiation dose reconstruction. A methodology has been developed to measure retrospective radiation exposures in human tooth enamel. This entails novel sample preparation procedures with minimum mechanical treatment to reduce the preparation induced uncertainties, establish optimum measurement conditions inside the EPR cavity, post-process the measured spectrum with functional simulation of dosimetric and other interfering signals, and reconstruct dose. By using this technique, retrospective gamma exposures as low as 80±30 mGy have been successfully deciphered. The notion of dose modifier was introduced in EPR biodosimetry for low dose measurements. It has been demonstrated that by using the modified zero added dose (MZAD) technique for low radiation exposures, doses in 100 mGy ranges can be easily reconstructed in teeth that were previously thought useless for EPR dosimetry. Also, the use of a dose modifier makes robust dose reconstruction possible for higher radiation exposures. The EPR dosimetry technique was also developed for tooth samples extracted from rodents, which represent small tooth sizing. EPR doses in the molars, extracted from the mice irradiated with whole body exposures, were reassessed and shown to be correct within the experimental uncertainty. The sensitivity of human tooth enamel for neutron irradiation, obtained from the 3 MV McMaster K.N. Van de Graaff accelerator, was also studied. For the first time this work has shown that the neutron sensitivity of the tooth enamel is approximately 1/10th of the equivalent gamma sensitivity. Parametric studies for neutron dose rate and neutron energy within the available range of the accelerator, showed no impact on the sensitivity of the tooth enamel. Therefore, tooth enamel can be used as a dosimeter for both neutrons

Stem cell property of postmigratory cranial neural crest cells and their utility in alveolar bone regeneration and tooth development.

Science.gov (United States)

Chung, Il-Hyuk; Yamaza, Takayoshi; Zhao, Hu; Choung, Pill-Hoon; Shi, Songtao; Chai, Yang

2009-04-01

The vertebrate neural crest is a multipotent cell population that gives rise to a variety of different cell types. We have discovered that postmigratory cranial neural crest cells (CNCCs) maintain mesenchymal stem cell characteristics and show potential utility for the regeneration of craniofacial structures. We are able to induce the osteogenic differentiation of postmigratory CNCCs, and this differentiation is regulated by bone morphogenetic protein (BMP) and transforming growth factor-beta signaling pathways. After transplantation into a host animal, postmigratory CNCCs form bone matrix. CNCC-formed bones are distinct from bones regenerated by bone marrow mesenchymal stem cells. In addition, CNCCs support tooth germ survival via BMP signaling in our CNCC-tooth germ cotransplantation system. Thus, we conclude that postmigratory CNCCs preserve stem cell features, contribute to craniofacial bone formation, and play a fundamental role in supporting tooth organ development. These findings reveal a novel function for postmigratory CNCCs in organ development, and demonstrate the utility of these CNCCs in regenerating craniofacial structures.

Dysfunction in the hip joints in children with Charcot-Marie-Tooth syndrome (literature review

Directory of Open Access Journals (Sweden)

Ivan Yurievich Pozdnikin

2015-09-01

Full Text Available A review of the literature on the treatment of children with dysfunction in the hip joints in motor-sensory neuropathy Charcot-Marie-Tooth is presented. Peculiarities of disease diagnosis and the approach used in the treatment of patients are described. The Charcot-Marie-Tooth syndrome is a hereditary neuromuscular disease characterized by progressive atrophy of the distal muscle group of the lower limbs. According to international authors, the incidence of hip joint dysfunction in this condition is at least 10%, ranking second only to foot deformities. In the Russian literature, the problem has not been adequately interpreted. Early diagnosis of dysfunction in the hip joints during Charcot-Marie-Tooth syndrome is complicated by the child's age and is characterized by progression. Conflicting clinical signs and trivial symptoms of the disease also confuse diagnosis, until it becomes clearer in adolescence or the second or third decade of life. Surgical reconstructive operations on the hip joint often occur too late, and they are accompanied by a greater frequency of neurological complications. Practitioner awareness coupled with an early diagnosis of hip subluxation and decentration and complex orthopedic and neurological examinations of children with the disease of Charcot-Marie-Tooth should result in more favorable outcomes.

The role of Msx1 and Pax9 in pathogenetic mechanisms of tooth agenesis

Directory of Open Access Journals (Sweden)

Yani Corvianindya Rahayu

2009-09-01

Full Text Available Background: Tooth agenesis is one of the most common developmental anomalies in human, which one or a few teeth are absent because they have never formed, may cause cosmetic or occlusal harm, while severe agenesis which are relatively rare require clinical attention to support and maintain the dental function. Molecular studies have demonstrated that tooth development is under strict genetic control. Purpose: This article want to review the genetic regulating that are responsible for tooth agenesis especially the role of Msx1 and Pax9 in pathogenetic mechanisms of tooth agenesis. Review: Tooth agenesis is a consequence of a qualitatively or quantitatively impaired function of genetic networks, which regulate tooth development. Mutations in Msx1 and Pax9 genes are dominant for tooth agenesis in humans. The Pax9 gene, which codes for a paired domain-containing transcription factor that plays an essential role in the development of mammal dentition, has been associated with selective tooth agenesis in humans and mice. Conclusion: Reduced amount of functional Msx1 or Pax9 protein in the tooth forming cells is able to cause severe and selective tooth agenesis. There are differences in the frequency of agenesis of specific teeth associated with the defects in Msx1 and defects in Pax9.

Parameters affecting tooth loss during periodontal maintenance in a Greek population.

Science.gov (United States)

Tsami, Alexandra; Pepelassi, Eudoxie; Kodovazenitis, George; Komboli, Mado

2009-09-01

Investigators have evaluated predictive parameters of tooth loss during the maintenance phase (MP). The authors conducted a retrospective study to evaluate the rate of tooth loss and to explore the parameters that affect tooth loss during MP in a Greek population. A periodontist administered periodontal treatment and maintenance care to 280 participants with severe periodontitis for a mean period +/- standard deviation of 10.84 +/- 2.13 years. The periodontist recorded the following parameters for each participant: oral hygiene index level, simplified gingival index level, clinical attachment level, probing depth measurements, initial tooth prognosis, smoking status, tooth loss during active periodontal treatment and MP, and compliance with suggested maintenance visits. The authors found that total tooth loss during active treatment (n = 1,427) was greater than during MP (n = 918) and was associated with the initial tooth prognosis, tooth type group, participants' compliance with suggested maintenance visits, smoking status and acceptability of the quality of tooth restorations. Most of the teeth extracted during maintenance had an initial guarded prognosis (n = 612). Participants whose compliance was erratic had a greater risk of undergoing tooth extraction than did participants whose compliance was complete. Participants' initial tooth prognosis, tooth type, compliance with suggested maintenance visits and smoking status affected tooth loss during MP. Initial guarded prognosis and erratic compliance increased the risk of undergoing tooth extraction during maintenance. Determining predictive parameters for disease progression and tooth loss provides critical information to clinicians so that they can develop and implement rational treatment planning.

Early inhibitory effects of zoledronic acid in tooth extraction sockets in dogs are negated by recombinant human bone morphogenetic protein.

Science.gov (United States)

Gerard, David A; Carlson, Eric R; Gotcher, Jack E; Pickett, David O

2014-01-01

This study was conducted with 2 purposes. The first was to determine the effect of a single dose of zoledronic acid (ZA) on the healing of a tooth extraction socket in dogs. The second was to determine if placement of recombinant human bone morphogenetic protein-2 (rhBMP-2)/absorbable collagen sponge (ACS) - INFUSE, (Medtronic, Memphis, TN) into these extraction sockets would inhibit the inhibition on bone healing and remodeling by ZA. Nine adult female beagle dogs (2 to 3 yr old) were placed into 3 groups of 3 dogs each. Group I received 15 mL of sterile saline intravenously; group II received 2.5 mg of ZA intravenously; and group III received 5 mg of ZA intravenously. Forty-five days after treatment, all dogs underwent extraction of noncontiguous right and left mandibular first molars and second premolars. In group I, the right mandibular extraction sockets had nothing placed in them, whereas the left mandibular sockets had only ACS placed in them. In groups II and III, the right mandibular sockets had rhBMP-2/ACS placed in them, whereas the left mandibular sockets had only ACS placed. All extraction sockets were surgically closed. Tetracycline was given intravenously 5 and 12 days later, and all animals were euthanized 15 days after tooth extraction. The extraction sockets and rib and femur samples were harvested immediately after euthanasia, processed, and studied microscopically. A single dose of ZA significantly inhibited healing and bone remodeling in the area of the tooth extractions. The combination of rhBMP-2/ACS appeared to over-ride some of the bone remodeling inhibition of the ZA and increased bone fill in the extraction sites, and remodeling activity in the area was noted. The effects of rhBMP-2/ACS were confined to the area of the extraction sockets because bone activity at distant sites was not influenced. A single dose of ZA administered intravenously inhibits early healing of tooth extraction sockets and bone remodeling in this animal model. The

Visualization of Tooth for Non-Destructive Evaluation from CT Images

Energy Technology Data Exchange (ETDEWEB)

Gao, Hui; Chae, Ok Sam [Kyung Hee University, Seoul (Korea, Republic of)

2009-06-15

This paper reports an effort to develop 3D tooth visualization system from CT sequence images as a part of the non-destructive evaluation suitable for the simulation of endodontics, orthodontics and other dental treatments. We focus on the segmentation and visualization for the individual tooth. In dental CT images teeth are touching the adjacent teeth or surrounded by the alveolar bones with similar intensity. We propose an improved level set method with shape prior to separate a tooth from other teeth as well as the alveolar bones. Reconstructed 3D model of individual tooth based on the segmentation results indicates that our technique is a very conducive tool for tooth visualization, evaluation and diagnosis. Some comparative visualization results validate the non-destructive function of our method.

Biological Effects of Orthodontic Tooth Movement Into the Grafted Alveolar Cleft.

Science.gov (United States)

Sun, Jian; Zhang, Xiaoyue; Li, Renmei; Chen, Zhengxi; Huang, Yuanliang; Chen, Zhenqi

2018-03-01

Functional stimulus during orthodontic tooth movement into the grafted bone can lead to better alveolar bone grafting outcomes. The aim of this study was to analyze the biological effects of orthodontic tooth movement into the grafted alveolar cleft area with histologic staining, fluorescence staining, and real-time polymerase chain reaction (PCR). An animal model of orthodontic tooth movement into the grafted alveolar cleft area was established in 8-week-old Sprague-Dawley rats. The animals were divided into the experimental group and the control group. Four checkpoints were observed: before orthodontic stimuli, day 1 after orthodontic stimuli, day 3 after orthodontic stimuli, and day 5 after orthodontic stimuli. The cleft bone formation conditions, including the collagen fibers and the activities of the osteoclasts and osteoblasts, were evaluated by histologic staining. The expression of tartrate-resistant acid phosphatase (TRAP), receptor activator nuclear factor κB ligand, and Runt-related transcription factor 2 was detected by real-time PCR in both groups. Hematoxylin-eosin staining showed that the remodeling process of iliac autografts was completed when the orthodontic stress was applied, whereas the bone tissues first showed osteoclastogenesis and then osteogenesis. On the basis of TRAP staining, the osteoclasts increased to the maximal amount on day 3 and decreased thereafter. Evidence from tetracycline fluorescence staining indicated that no obvious changes in osteoblast activity were detected at the early stage; however, it gradually increased, especially in the region close to the root surface. According to real-time PCR, the expression of TRAP increased in both the early and middle stages, that of receptor activator nuclear factor κB ligand increased in the early stage, and that of Runt-related transcription factor 2 increased in the late stage. Moreover, the results showed significant differences between the experimental and control groups

An automatic tooth preparation technique: A preliminary study

Science.gov (United States)

Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

2016-04-01

The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

Is gingival recession a consequence of an orthodontic tooth size and/or tooth position discrepancy? "A paradigm shift".

Science.gov (United States)

Richman, Colin

2011-01-01

Gingival recession (GR) is a commonly observed dental lesion. The underlying etiology has not been clearly identified, although several theories have been suggested. Tooth crowding or tooth malalignment is also frequently observed, with both conditions appearing to be more prevalent in developed countries with heterogeneous populations. A total of 25 consecutively treated patients representing 72 teeth and demonstrating facial clinical GR of > 3 mm were examined clinically, photographically, and with 3-dimensional radiology using conebeam computed tomography. All examined teeth presented with normal interproximal probing depths and attachment levels (teeth demonstrating > 3 mm of GR presented with significantly prominent facial tooth contours and associated alveolar bone dehiscences. Most involved teeth presented with their root structures extending beyond the facial alveolar bony housing (fenestrations). This represents a discrepancy between tooth size and alveolar bone dimensions in the buccolingual, axial, and sagittal orientation. Fewer involved teeth were malpositioned toward the buccal aspect. Both conditions were associated with facial alveolar bone dehiscences and associated GR. This study suggests tooth volume and/or tooth position within the alveolar bony housing strongly correlate with GR. All nonperiodontitis-involved teeth with GR were associated with either wider teeth or facially aligned teeth. However, it is emphasized that all facially aligned teeth, or "larger" teeth, do not necessarily present with GR. Based on these findings, the radiographic-supporting bone index is proposed. This index should facilitate appropriate evaluation of the alveolar bone supporting the mucogingival complex, both on the facial and lingual aspect of teeth. Further investigations are needed to support these preliminary data.

Regional early development and eruption of permanent teeth: case report.

Science.gov (United States)

Al Mullahi, A M; Bakathir, A; Al Jahdhami, S

2017-02-01

Early development and eruption of permanent teeth are rarely reported in scientific literature. Early eruption of permanent teeth has been reported to occur due to local factors such as trauma or dental abscesses in primary teeth, and in systemic conditions. Congenital diffuse infiltrating facial lipomatosis (CDIFL) is a rare condition that belongs to a group of lipomatosis tumours. In this disorder, the mature adipocytes invade adjacent soft and hard tissues in the facial region. Accelerated tooth eruption is one of the dental anomalies associated with CDIFL. A 3-year-old boy presented with a swelling of the lower lip localised early development and eruption of permanent teeth and dental caries involving many primary teeth. The planned treatment included biopsy of the swollen lower lip to confirm the diagnosis, surgical reduction and reconstruction of lip aesthetics. The management of the carious primary teeth included preventative and comprehensive dental care and extractions. These procedures were completed under general anaesthesia due to the child's young age and poor cooperation. The lip biopsy showed features of CDIFL such as the presence of infiltrating adipose tissue, prominent number of nerve bundles and thickened vessels. The high recurrence rate of CDIFL mandates long-term monitoring during the facial growth period of the child. Follow-up care by the paediatric dentist and maxillofacial surgeon has been required to manage all aspects of this congenital malformation. This rare disorder has many implications affecting child's facial aesthetics, psychological well being, developing occlusion and risk of dental caries. A multi-disciplinary approach is needed for management of this condition.

Tooth engineering: searching for dental mesenchymal cells sources.

Directory of Open Access Journals (Sweden)

Laetitia eKeller

2011-03-01

Full Text Available The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at ED14 allowed making full teeth with crown, root, periodontal ligament fibers and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.

Drugs influencing orthodontic tooth movement: An overall review

Directory of Open Access Journals (Sweden)

Kamatchi Diravidamani

2012-01-01

Full Text Available Orthodontic treatment is based on the premise that when force is delivered to a tooth and thereby transmitted to the adjacent investing tissues, certain mechanical, chemical, and cellular events take place within these tissues, which allow for structural alterations and contribute to the movement of that tooth. Molecules present in drugs and nutrients consumed regularly by patients can reach the mechanically stressed paradental tissues through the circulation and interact with local target cells. The combined effect of mechanical forces and one or more of these agents may be inhibitory, additive, or synergistic. Current orthodontic research aims to develop methods of increasing the tissue concentration of molecules promoting tooth movement, while simultaneously decreasing the concentration of unwanted elements which can produce harmful side effects. This article discusses in detail the various possible drugs that can bring about alterations in the desired orthodontic tooth movement.

[Assessment of tooth bleaching efficacy with spectrophotometer].

Science.gov (United States)

Zhu, Wenhao; Liu, Chang; Pan, Jie

2014-06-01

To analyze the changes in CIE L*, a*, and b* at cervical, body, and incisal sites after tooth bleaching by using a spectrophotometer. Sixty-seven intact and healthy maxillary central incisors were in-vestigated. These incisors were darker than A3 according to the Vita Classical shade guide. The CIE tooth shade parameters L*, a*, and b* were simultaneously recorded at three tooth areas (cervical, body, and incisal) with a spectrophotometer before and after tooth bleaching (35%H2O2 coordinating with Beyond whitening accelerator irradiating). The shade dif-ferential (DeltaE) was calculated. ANOVA, paired t-test, and Pearson correlation analysis were used for data analysis. The efficacy rates of tooth bleaching were satisfactory, with 86.6%, 86.6%, and 85.1% in the cervical, body, and incisal sites, respectively. The average values of DeltaE were 5.09, 4.44, and 4.40 in the cervical, body, and incisal sites. Tooth bleaching significantly increased L* and significantly decreased a* and b* in all tooth areas (P spectrophotometer could objectively evaluate the whitening effect of tooth bleaching at the different tooth sites. The tooth bleaching system (35%H202 coordinating with Beyond whitening accelerator irradiating) exerts powerful bleaching actions in most of the tooth areas investigated. The order of tooth bleaching effectiveness is cervicalbody>incisal. Yellow coloration is decreased mainly at the cervical site, and brightness was increased mostly at theincisal site. The effectiveness of tooth bleaching increases as the baseline b* value increases.

Relationship between pre-natal factors, the perinatal environment, motor development in the first year of life and the timing of first deciduous tooth emergence.

Science.gov (United States)

Żądzińska, Elżbieta; Sitek, Aneta; Rosset, Iwona

2016-01-01

The emergence of deciduous teeth, despite being genetically determined, shows significant correlation with the pre-natal environment, maternal factors, method of infant feeding and also family socioeconomic status. However, reported results are often contradictory and rarely concern healthy, full-term children. The objective of this study was to evaluate the influence of pre-natal and maternal factors as well as the method of infant feeding on the timing of first deciduous tooth emergence in healthy, full-term infants and to examine the relationship between the psychomotor development rate and the age at first tooth. The database contained 480 records for healthy, term-born children (272 boys and 208 girls born at 37-42 weeks of gestation) aged 9-54 months. Multiple regression analysis and multi-factor analysis of variance were used to identify significant explanatory variables for the age at first tooth. The onset of deciduous tooth emergence is negatively correlated with birth weight and maternal smoking during pregnancy and positively correlated with breastfeeding and the age at which the child begins to sit up unaided. These factors have an additive effect on the age at first tooth. An earlier onset of tooth emergence in children exposed to maternal smoking during pregnancy seems to provide further evidence for disturbed foetal development in a smoke-induced hypoxic environment.

Contributions to the tooth morphology in early embryos of three species of hammerhead sharks (Elasmobranchii: Sphyrnidae) and their evolutionary implications.

Science.gov (United States)

Mello, Waldiney; Brito, Paulo Marques Machado

2013-09-01

The tooth types in the embryos of the hammerhead sharks Sphyrna tiburo, Sphyrna tudes and Eusphyra blochii are here described in labial and lingual views, and, in some cases, in additional views. The presence of cusplets was observed in the anterior teeth of S. tiburo and S. tudes, which is secondarily lost after early embryonic stages. Many aligned root foramina were detected in the sphyrnids, which, as the cusplets, are shared by many phylogenetic-related carcharhinids. Other anatomic features, related to the root and central cusp, are presented for the first time. Such characters represent the first step to compare the teeth of extant and fossil species. Copyright © 2013. Published by Elsevier SAS.

Overview of Tooth Disorders

Science.gov (United States)

... teeth using a thin resin cement. Bleaching, or tooth whitening, is a process used by dentists to lighten ... following? Damage to only the hard outer surface (enamel) of the tooth An incomplete fracture of a ...

[The management of 126 cases of posterior cracked crown of tooth and its effective observation].

Science.gov (United States)

Chen, L L

2000-06-01

To detect the treatment and effect of posterior cracked tooth. 162 posterior cracked teeth of 158 cases, including enamel fissure and dentin fissure, all there cases undergone the synthetical treatment and follow up in different period, the longest observation period was 2.5 years. The healing and improved rate of 162 cracked teeth 90.74%. Among cases of failure, we have founded 6 cases of acute pulpitis (3.7%), 3 cases of alveodental abscess (1.85%), 2 cases of chronic apical periodontitis (1.24%), 4 cases of tooth fracture (2.4%). Cracked tooth was caused by multiple factors. Early diagnosis, synthetical treatment, and follow up in different period are 3 main factors in treatment.

Some effects of radiation therapy during early childhood on facial growth and tooth development

International Nuclear Information System (INIS)

Harris, A.M.P.; Nortje, C.J.; Lucchesi, M.V.

1986-01-01

Case histories of the dental examinations of 2 children who were treated by radiation therapy for retinoblastomas in early childhood are discussed. The evidence presented here seems to indicate that in both patients early irradiation of the orbits and, as a result thereof, the jaws, could be partly responsible for the underdevelopment of this region

Dental Caries (Tooth Decay)

Science.gov (United States)

... Materials Contact Us Home Research Data & Statistics Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

Dental Caries (Tooth Decay)

Science.gov (United States)

... Contact Us Home Research Data & Statistics Share Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

Fluoridation and tooth wear in Irish adults.

LENUS (Irish Health Repository)

Burke, F M

2010-10-01

The aim of this study was to determine the prevalence of tooth wear in adults in Ireland and its relationship with water fluoridation. The National Survey of Adult Oral Health was conducted in 2000\\/2001. Tooth wear was determined using a partial mouth examination assessing the upper and lower anterior teeth. A total of 2456 subjects were examined. In this survey, increasing levels and severity of tooth wear were associated with ageing. Men were more affected by tooth wear and were more likely to be affected by severe tooth wear than women. It was found that age, and gender were significant predictors of tooth wear (P < 0.01). Overall, there was no significant relationship between fluoridation and tooth wear in this study.

Tooth eruption and browridge formation.

Science.gov (United States)

Russell, M D

1982-05-01

One of the most reasonable hypotheses regarding the functional significance of the browridge is that the supraorbital torus forms in response to masticatory stress during development. Oyen, Walker, and Rice (1979) have recently proposed a model that tests this hypothesis: if browridges are functionally related to masticatory stresses on the cranial vault, then changes in the biomechanics of the masticatory system ought to be reflected by changes in the browridge. To test their model they attempted to relate biomechanical discontinuities resulting from tooth eruption to episodes of bone deposition on the supraorbital tori of a developmental series of dry Papio crania. This paper reports on a parallel test of the model on a cross-sectional sample of Australian Aboriginal juvenile crania. This sample showed no relation between tooth eruption and the supraorbital surface morphology thought to be indicative of active bone deposition. It is also demonstrated that no significant relationship between tooth eruption and episodes of bone deposition is shown by the Papio sample. It is concluded that the use of small cross-sectional samples of dry crania does not provide a valid test of the model.

The Impact of the Eda Pathway on Tooth Root Development.

Czech Academy of Sciences Publication Activity Database

Fons Romero, J.M.; Star, H.; Lav, R.; Watkins, S.; Harrison, M.; Hovořáková, Mária; Headon, D.; Tucker, Abigail

2017-01-01

Roč. 96, č. 11 (2017), s. 1290-1297 ISSN 0022-0345 R&D Projects: GA ČR(CZ) GB14-37368G Institutional support: RVO:68378041 Keywords : tooth * ectodermal dysplasia * epithelium Subject RIV: EA - Cell Biology OBOR OECD: Developmental biology Impact factor: 4.755, year: 2016

Novel human mutation and CRISPR/Cas genome-edited mice reveal the importance of C-terminal domain of MSX1 in tooth and palate development.

Science.gov (United States)

Mitsui, Silvia Naomi; Yasue, Akihiro; Masuda, Kiyoshi; Naruto, Takuya; Minegishi, Yoshiyuki; Oyadomari, Seiichi; Noji, Sumihare; Imoto, Issei; Tanaka, Eiji

2016-12-05

Several mutations, located mainly in the MSX1 homeodomain, have been identified in non-syndromic tooth agenesis predominantly affecting premolars and third molars. We identified a novel frameshift mutation of the highly conserved C-terminal domain of MSX1, known as Msx homology domain 6 (MH6), in a Japanese family with non-syndromic tooth agenesis. To investigate the importance of MH6 in tooth development, Msx1 was targeted in mice with CRISPR/Cas system. Although heterozygous MH6 disruption did not alter craniofacial development, homozygous mice exhibited agenesis of lower incisors with or without cleft palate at E16.5. In addition, agenesis of the upper third molars and the lower second and third molars were observed in 4-week-old mutant mice. Although the upper second molars were present, they were abnormally small. These results suggest that the C-terminal domain of MSX1 is important for tooth and palate development, and demonstrate that that CRISPR/Cas system can be used as a tool to assess causality of human disorders in vivo and to study the importance of conserved domains in genes.

Investigation of EPR signals on tooth enamel

Energy Technology Data Exchange (ETDEWEB)

Pavlenko, A; Mironova-Ulmane, N; Polakov, M; Riekstina, D [Institute of Solid State Physics, University of Latvia, Riga (Latvia)

2007-12-15

Calcified tissues are involved in continues metabolic process in human organism exchanging a number of chemical elements with environment. The rate of biochemical reactions is tissue dependent and the slowest one at the tooth enamel, the most mineralized tissue of human organism. The long time stability and unique chemical composition make tooth enamel suitable for number of application. The assessment of individual radiation dose by Electron Paramagnetic Resonance (EPR) and evaluations of elemental composition by Instrumentation Neutron Activation Analysis (INAA) are the well known procedures where properties of tooth enamel intensively used. The current work is focused on investigation of EPR signals and determination of chemical composition on several teeth samples having different origin. The EPR spectra and INAA element content of milk tooth, caries tooth, and paradantose tooth have been compared to each other. The results showed that the intensity of EPR signal is much higher for the caries tooth than the for paradantose tooth that is in agreement with depleted Ca content.

Tooth whitening: what we now know.

Science.gov (United States)

Carey, Clifton M

2014-06-01

Current research about tooth whitening shows that it is safe and effective when manufacturer's protocol is followed, yet there are risks of which the profession and users should be aware. This update provides a summary of current research and assessment of the safety and efficacy of tooth whitening regimens. Tooth whitening has become one of the most frequently requested dental procedures by the public. The public has come to demand whiter, more perfect smiles and in response many choices for tooth whitening have been made available. These include home-based products such as toothpastes, gels, and films, as well as in-office based systems where products containing highly concentrated bleaching agents are applied under professional supervision. The profession and public have been aware of certain risks related to tooth whitening such as increased tooth sensitivity and gingival irritation. New research has shown that there are other risks such as tooth surface roughening and softening, increased potential for demineralization, degradation of dental restorations, and unacceptable color change of dental restorations. The new research is also focused on optimizing whitening procedures to reduce tooth sensitivity and to increase the persistence of the whitening. Current reports in the literature are reviewed that are related to the use of peroxide based whitening methods. These reports include in vitro studies for method optimization and mechanism as well as clinical studies on effects of various whitening regimens. When manufacturer's instructions are followed, hydrogen peroxide and carbamide peroxide based tooth whitening is safe and effective. Patients should be informed of the risks associated with tooth whitening and instructed on identification of adverse occurrences so that they may seek professional help as needed. Copyright © 2014 Elsevier Inc. All rights reserved.

Natural selection and molecular evolution in primate PAX9 gene, a major determinant of tooth development.

Science.gov (United States)

Pereira, Tiago V; Salzano, Francisco M; Mostowska, Adrianna; Trzeciak, Wieslaw H; Ruiz-Linares, Andrés; Chies, José A B; Saavedra, Carmen; Nagamachi, Cleusa; Hurtado, Ana M; Hill, Kim; Castro-de-Guerra, Dinorah; Silva-Júnior, Wilson A; Bortolini, Maria-Cátira

2006-04-11

Large differences in relation to dental size, number, and morphology among and within modern human populations and between modern humans and other primate species have been observed. Molecular studies have demonstrated that tooth development is under strict genetic control, but, the genetic basis of primate tooth variation remains unknown. The PAX9 gene, which codes for a paired domain-containing transcription factor that plays an essential role in the development of mammal dentition, has been associated with selective tooth agenesis in humans and mice, which mainly involves the posterior teeth. To determine whether this gene is polymorphic in humans, we sequenced approximately 2.1 kb of the entire four-exon region (exons 1, 2, 3 and 4; 1,026 bp) and exon-intron (1.1 kb) boundaries of 86 individuals sampled from Asian, European, and Native American populations. We provided evidence that human PAX9 polymorphisms are limited to exon 3 only and furnished details about the distribution of a mutation there in 350 Polish subjects. To investigate the pattern of selective pressure on exon 3, we sequenced ortholog regions of this exon in four species of New World monkeys and one gorilla. In addition, orthologous sequences of PAX9 available in public databases were also analyzed. Although several differences were identified between humans and other species, our findings support the view that strong purifying selection is acting on PAX9. New World and Old World primate lineages may, however, have different degrees of restriction for changes in this DNA region.

The correction of occlusal vertical dimension on tooth wear

Directory of Open Access Journals (Sweden)

Rostiny Rostiny

2007-12-01

Full Text Available The loss of occlusal vertical dimension which is caused by tooth wear is necessarily treated to regain vertical dimension. Correctional therapy should be done as early possible. In this case, simple and relatively low cost therapy was performed. In unserve loss of occlusal vertical dimension, partial removable denture could be used and the improvement of lengthening anterior teeth using composite resin to improve to regain vertical dimensional occlusion.

Use of quantitative light-induced fluorescence to monitor tooth whitening

Science.gov (United States)

Amaechi, Bennett T.; Higham, Susan M.

2001-04-01

The changing of tooth shade by whitening agents occurs gradually. Apart from being subjective and affected by the conditions of the surroundings, visual observation cannot detect a very slight change in tooth color. An electronic method, which can communicate the color change quantitatively, would be more reliable. Quantitative Light- induced Fluorescence (QLF) was developed to detect and assess dental caries based on the phenomenon of change of autofluorescence of a tooth by demineralization. However, stains on the tooth surface exhibit the same phenomenon, and therefore QLF can be used to measure the percentage fluorescence change of stained enamel with respect to surrounding unstained enamel. The present study described a technique of assessing the effect of a tooth-whitening agent using QLF. This was demonstrated in two experiments in which either wholly or partially stained teeth were whitened by intermittent immersion in sodium hypochlorite. Following each immersion, the integrated fluorescence change due to the stain was quantified using QLF. In either situation, the value of (Delta) Q decreased linearly as the tooth regained its natural shade. It was concluded that gradual changing of the shade of discolored teeth by a whitening agent could be quantified using QLF.

Proteome Analysis Identifies the Dpr Protein of Streptococcus mutans as an Important Factor in the Presence of Early Streptococcal Colonizers of Tooth Surfaces

Science.gov (United States)

Yoshida, Akihiro; Niki, Mamiko; Yamamoto, Yuji; Yasunaga, Ai; Ansai, Toshihiro

2015-01-01

Oral streptococci are primary colonizers of tooth surfaces and Streptococcus mutans is the principal causative agent of dental caries in humans. A number of proteins are involved in the formation of monospecies biofilms by S. mutans. This study analyzed the protein expression profiles of S. mutans biofilms formed in the presence or absence of S. gordonii, a pioneer colonizer of the tooth surface, by two-dimensional gel electrophoresis (2-DE). After identifying S. mutans proteins by Mass spectrometric analysis, their expression in the presence of S. gordonii was analyzed. S. mutans was inoculated with or without S. gordonii DL1. The two species were compartmentalized using 0.2-μl Anopore membranes. The biofilms on polystyrene plates were harvested, and the solubilized proteins were separated by 2-DE. When S. mutans biofilms were formed in the presence of S. gordonii, the peroxide resistance protein Dpr of the former showed 4.3-fold increased expression compared to biofilms that developed in the absence of the pioneer colonizer. In addition, we performed a competition assay using S. mutans antioxidant protein mutants together with S. gordonii and other initial colonizers. Growth of the dpr-knockout S. mutans mutant was significantly inhibited by S. gordonii, as well as by S. sanguinis. Furthermore, a cell viability assay revealed that the viability of the dpr-defective mutant was significantly attenuated compared to the wild-type strain when co-cultured with S. gordonii. Therefore, these results suggest that Dpr might be one of the essential proteins for S. mutans survival on teeth in the presence of early colonizing oral streptococci. PMID:25816242

Proteome analysis identifies the Dpr protein of Streptococcus mutans as an important factor in the presence of early streptococcal colonizers of tooth surfaces.

Directory of Open Access Journals (Sweden)

Akihiro Yoshida

Full Text Available Oral streptococci are primary colonizers of tooth surfaces and Streptococcus mutans is the principal causative agent of dental caries in humans. A number of proteins are involved in the formation of monospecies biofilms by S. mutans. This study analyzed the protein expression profiles of S. mutans biofilms formed in the presence or absence of S. gordonii, a pioneer colonizer of the tooth surface, by two-dimensional gel electrophoresis (2-DE. After identifying S. mutans proteins by Mass spectrometric analysis, their expression in the presence of S. gordonii was analyzed. S. mutans was inoculated with or without S. gordonii DL1. The two species were compartmentalized using 0.2-μl Anopore membranes. The biofilms on polystyrene plates were harvested, and the solubilized proteins were separated by 2-DE. When S. mutans biofilms were formed in the presence of S. gordonii, the peroxide resistance protein Dpr of the former showed 4.3-fold increased expression compared to biofilms that developed in the absence of the pioneer colonizer. In addition, we performed a competition assay using S. mutans antioxidant protein mutants together with S. gordonii and other initial colonizers. Growth of the dpr-knockout S. mutans mutant was significantly inhibited by S. gordonii, as well as by S. sanguinis. Furthermore, a cell viability assay revealed that the viability of the dpr-defective mutant was significantly attenuated compared to the wild-type strain when co-cultured with S. gordonii. Therefore, these results suggest that Dpr might be one of the essential proteins for S. mutans survival on teeth in the presence of early colonizing oral streptococci.

Technique: imaging earliest tooth development in 3D using a silver-based tissue contrast agent.

Science.gov (United States)

Raj, Muhammad T; Prusinkiewicz, Martin; Cooper, David M L; George, Belev; Webb, M Adam; Boughner, Julia C

2014-02-01

Looking in microscopic detail at the 3D organization of initiating teeth within the embryonic jaw has long-proved technologically challenging because of the radio-translucency of these tiny un-mineralized oral tissues. Yet 3D image data showing changes in the physical relationships among developing tooth and jaw tissues are vital to understand the coordinated morphogenesis of vertebrate teeth and jaws as an animal grows and as species evolve. Here, we present a new synchrotron-based scanning solution to image odontogenesis in 3D and in histological detail using a silver-based contrast agent. We stained fixed, intact wild-type mice aged embryonic (E) day 10 to birth with 1% Protargol-S at 37°C for 12-32 hr. Specimens were scanned at 4-10 µm pixel size at 28 keV, just above the silver K-edge, using micro-computed tomography (µCT) at the Canadian Light Source synchrotron. Synchrotron µCT scans of silver-stained embryos showed even the earliest visible stages of tooth initiation, as well as many other tissue types and structures, in histological detail. Silver stain penetration was optimal for imaging structures in intact embryos E15 and younger. This silver stain method offers a powerful yet straightforward approach to visualize at high-resolution and in 3D the earliest stages of odontogenesis in situ, and demonstrates the important of studying the tooth organ in all three planes of view. Copyright © 2013 Wiley Periodicals, Inc.

Platelet-rich fibrin-mediated revitalization of immature necrotic tooth

Directory of Open Access Journals (Sweden)

Navin Mishra

2013-01-01

Full Text Available Contemporary studies have shown that the regeneration of tissues and root elongation is possible in necrotic immature permanent teeth. The purpose of this case report is to add a new vista in regenerative endodontic therapy by using platelet rich fibrin for revitalization of immature non vital tooth. An 11year old boy with the history of trauma was diagnosed with the pulpal necrosis and symptomatic apical periodontitis in tooth #21. Intra oral periapical radiograph showed open apex and associated immature supernumerary tooth with respect to tooth #21. Access preparation and minimal instrumentation was done to remove necrotic debris under copious irrigation with 2.5% sodium hypochlorite. Triple antibiotic paste was packed in the canal for four weeks. During second visit, 5 mL of whole blood was drawn from the medial cubital vein of the patient and blood was then subjected to centrifugation at 2400 rpm for 12 minutes for the preparation of Platelet rich fibrin (PRF utilizing Choukroun′s method. Triple antibiotic paste was removed and canal was dried. PRF clot was pushed to the apical region of tooth #21 using hand pluggers. Three milimetres of Mineral trioxide (MTA was placed in cervical part of the root canal and permanent restoration was done three days later. Clinical examination at 6 and 12 months revealed no sensitivity to percussion and palpation in tooth #21and it responded positively to both electric pulp and cold tests. Radiographic examination showed resolution of periapical rarefaction, further root development and apical closure of the tooth #21 and its associated supernumerary tooth. On the basis of successful outcome of the present case it can be stated that PRF clot may serve as a scaffold for regeneration of necrotic immature teeth.

Tooth extraction by orthodontic force after radiation therapy: report of case

Energy Technology Data Exchange (ETDEWEB)

Rodu, B.; Filler, S.J.; Woodfin, G.K.

1985-12-01

This report presents a therapeutic approach to orthodontic tooth extraction in a patient at high risk for the development of osteoradionecrosis with conventional techniques. The rationale for this procedure is discussed in detail, combining principles of radiation biology, clinical radiation therapy, and biomechanics of tooth movement.

Tooth extraction by orthodontic force after radiation therapy: report of case

International Nuclear Information System (INIS)

Rodu, B.; Filler, S.J.; Woodfin, G.K.

1985-01-01

This report presents a therapeutic approach to orthodontic tooth extraction in a patient at high risk for the development of osteoradionecrosis with conventional techniques. The rationale for this procedure is discussed in detail, combining principles of radiation biology, clinical radiation therapy, and biomechanics of tooth movement

Endodontic Treatment of an Anomalous Anterior Tooth with the Aid of a 3-dimensional Printed Physical Tooth Model.

Science.gov (United States)

Byun, Chanhee; Kim, Changhwan; Cho, Seungryong; Baek, Seung Hoon; Kim, Gyutae; Kim, Sahng G; Kim, Sun-Young

2015-06-01

Endodontic treatment of tooth formation anomalies is a challenge to clinicians and as such requires a complete understanding of the aberrant root canal anatomy followed by careful root canal disinfection and obturation. Here, we report the use of a 3-dimensional (3D) printed physical tooth model including internal root canal structures for the endodontic treatment of a challenging tooth anomaly. A 12-year-old boy was referred for endodontic treatment of tooth #8. The tooth showed class II mobility with swelling and a sinus tract in the buccal mucosa and periapical radiolucency. The tooth presented a very narrow structure between the crown and root by distal concavity and a severely dilacerated root. Moreover, a perforation site with bleeding and another ditching site were identified around the cervical area in the access cavity. A translucent physical tooth model carrying the information on internal root canal structures was built through a 3-step process: data acquisition by cone-beam computed tomographic scanning, virtual modeling by image processing, and manufacturing by 3D printing. A custom-made guide jig was then fabricated to achieve a safe and precise working path to the root canal. Endodontic procedures including access cavity preparation were performed using the physical tooth model and the guide jig. At the 7-month follow-up, the endodontically treated tooth showed complete periapical healing with no clinical signs and symptoms. This case report describes a novel method of endodontic treatment of an anomalous maxillary central incisor with the aid of a physical tooth model and a custom-made guide jig via 3D printing technique. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Charcot-Marie-Tooth disease complicating type 2 diabetes.

LENUS (Irish Health Repository)

Win, Htet Htet Ne

2012-02-01

Although both conditions are relatively common, there are very few descriptions of type 2 diabetes mellitus coexisting with Charcot-Marie-Tooth disease (CMT). This case report and literature review describes a 53-year-old Irish man who presented with type 2 diabetes and significant neuropathy, and who was subsequently diagnosed with CMT type 1A. This case report will also discuss how to differentiate diabetic neuropathy from a progressive hereditary neuropathy and how coexistence aggravates the progression of neuropathy thus necessitating early diagnosis.

Charcot-marie-tooth disease complicating type 2 diabetes.

LENUS (Irish Health Repository)

Win, Htet Htet Ne

2011-07-01

Although both conditions are relatively common, there are very few descriptions of type 2 diabetes mellitus coexisting with Charcot-Marie-Tooth disease (CMT). This case report and literature review describes a 53-year-old Irish man who presented with type 2 diabetes and significant neuropathy, and who was subsequently diagnosed with CMT type 1A. This case report will also discuss how to differentiate diabetic neuropathy from a progressive hereditary neuropathy and how coexistence aggravates the progression of neuropathy thus necessitating early diagnosis.

Primary culprit for tooth loss!!

OpenAIRE

Nuvvula, Sailavanya; Chava, Vijay Kumar; Nuvvula, Sivakumar

2016-01-01

Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A quest...

Tooth fragment reattachment techniques-A systematic review.

Science.gov (United States)

Garcia, Fernanda Cristina P; Poubel, Déborah L N; Almeida, Júlio César F; Toledo, Isabela P; Poi, Wilson R; Guerra, Eliete N S; Rezende, Liliana V M L

2018-03-07

Several strategies have been developed for tooth fragment reattachment following fracture. Although many techniques have been reported, there is no consensus on which one has the best results in terms of the bond strength between the fragment and the dentin over time. The aim of this study was to assess the currently reported tooth fragment reattachment techniques for fractured crowns of anterior teeth. The PubMed, LILACS, Web of Science, Cochrane, and Scopus databases were searched in October 2016, and the search was updated in February 2017. A search of the gray literature was performed in Google Scholar and OpenGrey. Reference lists of eligible studies were cross-checked to identify additional studies; gray literature and ongoing trials were investigated. Two authors assessed studies to determine inclusion and undertook data extraction. Case reports/series of three or more cases, cross-sectional studies, cohort studies, and in vivo clinical trials in all languages were included. Five articles remained after screening. These studies predominantly reported on fragment reattachment with composite resin and resin cement. There was little consistency among the studies in regard to the technique used for tooth fragment reattachment and length of the follow-up period. According to the evidence found in the studies included in this review, simple tooth fragment reattachment was the preferred reattachment technique. An increase in the bond strength between tooth fragment and dentin was observed when an intermediate material was used. Further investigation is needed, using standard follow-up periods and larger samples. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Jaw lesions associated with impacted tooth: A radiographic diagnostic guide

Energy Technology Data Exchange (ETDEWEB)

Motazavi, Hamed; Bharvand, Maryam [Dept. of Oral Medicine, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran (Iran, Islamic Republic of)

2016-09-15

This review article aimed to introduce a category of jaw lesions associated with impacted tooth. General search engines and specialized databases such as Google Scholar, PubMed, PubMed Central, MedLine Plus, Science Direct, Scopus, and well-recognized textbooks were used to find relevant studies using keywords such as 'jaw lesion', 'jaw disease', 'impacted tooth', and 'unerupted tooth'. More than 250 articles were found, of which approximately 80 were broadly relevant to the topic. We ultimately included 47 articles that were closely related to the topic of interest. When the relevant data were compiled, the following 10 lesions were identified as having a relationship with impacted tooth: dentigerous cysts, calcifying odontogenic cysts, unicystic (mural) ameloblastomas, ameloblastomas, ameloblastic fibromas, adenomatoid odontogenic tumors, keratocystic odontogenic tumors, calcifying epithelial odontogenic tumors, ameloblastic fibro-odontomas, and odontomas. When clinicians encounter a lesion associated with an impacted tooth, they should first consider these entities in the differential diagnosis. This will help dental practitioners make more accurate diagnoses and develop better treatment plans based on patients' radiographs.

Jaw lesions associated with impacted tooth: A radiographic diagnostic guide

International Nuclear Information System (INIS)

Motazavi, Hamed; Bharvand, Maryam

2016-01-01

This review article aimed to introduce a category of jaw lesions associated with impacted tooth. General search engines and specialized databases such as Google Scholar, PubMed, PubMed Central, MedLine Plus, Science Direct, Scopus, and well-recognized textbooks were used to find relevant studies using keywords such as 'jaw lesion', 'jaw disease', 'impacted tooth', and 'unerupted tooth'. More than 250 articles were found, of which approximately 80 were broadly relevant to the topic. We ultimately included 47 articles that were closely related to the topic of interest. When the relevant data were compiled, the following 10 lesions were identified as having a relationship with impacted tooth: dentigerous cysts, calcifying odontogenic cysts, unicystic (mural) ameloblastomas, ameloblastomas, ameloblastic fibromas, adenomatoid odontogenic tumors, keratocystic odontogenic tumors, calcifying epithelial odontogenic tumors, ameloblastic fibro-odontomas, and odontomas. When clinicians encounter a lesion associated with an impacted tooth, they should first consider these entities in the differential diagnosis. This will help dental practitioners make more accurate diagnoses and develop better treatment plans based on patients' radiographs

Dental Stem Cell in Tooth Development and Advances of Adult Dental Stem Cell in Regenerative Therapies.

Science.gov (United States)

Tan, Jiali; Xu, Xin; Lin, Jiong; Fan, Li; Zheng, Yuting; Kuang, Wei

2015-01-01

Stem cell-based therapies are considered as a promising treatment for many clinical usage such as tooth regeneration, bone repairation, spinal cord injury, and so on. However, the ideal stem cell for stem cell-based therapy still remains to be elucidated. In the past decades, several types of stem cells have been isolated from teeth, including dental pulp stem cells (DPSCs), stem cells from human exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), dental follicle progenitor stem cells (DFPCs) and stem cells from apical papilla (SCAP), which may be a good source for stem cell-based therapy in certain disease, especially when they origin from neural crest is considered. In this review, the specific characteristics and advantages of the adult dental stem cell population will be summarized and the molecular mechanisms of the differentiation of dental stem cell during tooth development will be also discussed.

Multivariate image analysis of laser-induced photothermal imaging used for detection of caries tooth

Science.gov (United States)

El-Sherif, Ashraf F.; Abdel Aziz, Wessam M.; El-Sharkawy, Yasser H.

2010-08-01

Time-resolved photothermal imaging has been investigated to characterize tooth for the purpose of discriminating between normal and caries areas of the hard tissue using thermal camera. Ultrasonic thermoelastic waves were generated in hard tissue by the absorption of fiber-coupled Q-switched Nd:YAG laser pulses operating at 1064 nm in conjunction with a laser-induced photothermal technique used to detect the thermal radiation waves for diagnosis of human tooth. The concepts behind the use of photo-thermal techniques for off-line detection of caries tooth features were presented by our group in earlier work. This paper illustrates the application of multivariate image analysis (MIA) techniques to detect the presence of caries tooth. MIA is used to rapidly detect the presence and quantity of common caries tooth features as they scanned by the high resolution color (RGB) thermal cameras. Multivariate principal component analysis is used to decompose the acquired three-channel tooth images into a two dimensional principal components (PC) space. Masking score point clusters in the score space and highlighting corresponding pixels in the image space of the two dominant PCs enables isolation of caries defect pixels based on contrast and color information. The technique provides a qualitative result that can be used for early stage caries tooth detection. The proposed technique can potentially be used on-line or real-time resolved to prescreen the existence of caries through vision based systems like real-time thermal camera. Experimental results on the large number of extracted teeth as well as one of the thermal image panoramas of the human teeth voltanteer are investigated and presented.

Atypical Odontalgia (Phantom Tooth Pain)

Science.gov (United States)

... atypical facial pain, phantom tooth pain, or neuropathic orofacial pain, is characterized by chronic pain in a tooth ... such as a specialist in oral medicine or orofacial pain. The information contained in this monograph is for ...

Tooth breakage in patients injected with 224Ra

International Nuclear Information System (INIS)

Sonnabend, E.; Spiess, H.; Mays, C.W.

1986-01-01

Tooth breakage has been common among the 224 Ra patients, especially those injected as teenagers. The fracture of 1 or more teeth was reported by 26% (8/31) of boys and 23% (7/30) of girls injected with 224 Ra at 16-20 years of age. Combining results from all age groups, the incidence of tooth fractures increased significantly with dose (P=0.01). Unlike the normal loss of permanent teeth by periodontal disease, in which the entire tooth is lost, the tooth loss following 224 Ra injection was primarily from tooth resorption near the gum line causing the tooth crowns to break off easily. Eventually the tooth roots may either become incorporated into the jawbone or are resorbed and replaced with bone. These tooth fractures resembled those observed in the U.S. radium dial painters and in dogs injected with bone-seeking α-emitters. (orig.)

DIET EFFECT ON TOOTH DECAY WITH INDEX KPE EVALUATION IN BLANSKO

OpenAIRE

VAŠÍČKOVÁ, Pavlína

2009-01-01

Regular development of our teeth is the result of reciprocal induction processes with continual development stages. The non-interrupted development of the organism is the basic precondition of healthy dental tissues. It is, therefore, necessary to be aware of the fact that everybody takes on full responsibility for their own health. If we want to have clean and healthy teeth without tooth ache, oulitis and other problems we must take proper dental care. Tooth decay is the most widespread dise...

Corticotomy affects both the modus and magnitude of orthodontic tooth movement

DEFF Research Database (Denmark)

Verna, Carlalberta; Cattaneo, Paolo; Dalstra, Michel

2017-01-01

OBJECTIVE: To analyze whether the decreased bone density due to the manipulation of bone remodeling rate has an influence on the type of the planned tooth movement. MATERIALS AND METHODS: A finite element model of a lower incisor has been developed. The density of the alveolar bone surrounding th......: A decreased bone density influences not only the amount of tooth movement, but also its type. This study suggests that the moment-to-force ratios used in conventional orthodontics should be modified in case of techniques that decrease bone density to enhance tooth movement rate....

Autotransplantation donor tooth site harvesting using piezosurgery

OpenAIRE

Ylikontiola, Leena P.; S?ndor, George K.

2016-01-01

Abstract Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its ...

First record of plicidentine in Synapsida and patterns of tooth root shape change in Early Permian sphenacodontians.

Science.gov (United States)

Brink, Kirstin S; LeBlanc, Aaron R H; Reisz, Robert R

2014-11-01

Recent histological studies have revealed a diversity of dental features in Permo-Carboniferous tetrapods. Here, we report on the occurrence of plicidentine (infolded dentine around the base of the tooth root) in Sphenacodontia, the first such documentation in Synapsida, the clade that includes mammals. Five taxa were examined histologically, Ianthodon schultzei, Sphenacodon ferocior, Dimetrodon limbatus, Dimetrodon grandis, and Secodontosaurus obtusidens. The tooth roots of Ianthodon possess multiple folds, which is generally viewed as the primitive condition for amniotes. Sphenacodon and D. limbatus have distinctive "four-leaf clover"-shaped roots in cross section, whereas Secodontosaurus has an elongate square shape with only subtle folding. The most derived and largest taxon examined in this study, D. grandis, has rounded roots in cross section and therefore no plicidentine. This pattern of a loss of plicidentine in sphenacodontids supports previous functional hypotheses of plicidentine, where teeth with shallow roots require folds to increase the area of attachment to the tooth-bearing element, whereas teeth with long roots do not. This pattern may also reflect differences in diet between co-occurring sphenacodontids as well as changes in feeding niche through time, specifically in the apex predator Dimetrodon.

Test Tube Tooth: The Next Big Thing.

Science.gov (United States)

Yadav, Preeti; Tahir, Mohammed; Yadav, Harsh; Sureka, Rakshit; Garg, Aarti

2016-06-01

Unlike some vertebrates and fishes, humans do not have the capacity for tooth regeneration after the loss of permanent teeth. Although artificial replacement with removable dentures, fixed prosthesis and implants is possible through advances in the field of prosthetic dentistry, it would be ideal to recreate a third set of natural teeth to replace lost dentition. For many years now, researchers in the field of tissue engineering have been trying to bioengineer dental tissues as well as whole teeth. In order to attain a whole tooth through dental engineering, that has the same or nearly same biological, mechanical and physical properties of a natural tooth, it's necessary to deal with all the cells and tissues which are concerned with the formation, maintenance and repair of the tooth. In this article we review the steps involved in odontogenesis or organogenesis of a tooth and progress in the bioengineering of a whole tooth.

Micro-PIXE (proton-induced X-ray emission) study of the effects of fluoride on mineral distribution patterns in enamel and dentin in the developing hamster tooth germ

International Nuclear Information System (INIS)

Lyaruu, D.M.; Tros, G.H.; Bronckers, A.L.; Woeltgens, J.H.

1990-01-01

Micro-PIXE (proton-induced X-ray emission) analysis was performed on unfixed and anhydrously prepared sections from developing enamel and dentin from hamsters injected with a single dose of 20 mg NaF/kg body weight. Fluoride, apart from inducing the formation of the characteristic paired response in the enamel (i.e., a hyper- followed by a hypomineralized band in the secretory enamel), also induces the formation of sub-ameloblastic cystic lesions under the transitional and early secretory enamel accompanied by relatively intense hypermineralization of the underlying cystic enamel surface. These cystic lesions, however, were only found to be associated with certain isolated populations of these cells. In addition, these lesions were restricted to the smooth surfaces of the tooth germ only. Cystic lesions such as those seen under the transitional and early secretory ameloblasts were not observed under the fully secretory or maturation stage ameloblasts. Why fluoride induces the formation of cystic lesions in some ameloblast populations while other cells in the same stage of development apparently remain unaffected, is a matter which needs further investigation

Apical Revascularization after Delayed Tooth Replantation: An Unusual Case

Directory of Open Access Journals (Sweden)

Marília Pacífico Lucisano

2016-01-01

Full Text Available The aim of this paper is to present the clinical and radiological outcome of the treatment involving a delayed tooth replantation after an avulsed immature permanent incisor, with a follow-up of 1 year and 6 months. An 8-year-old boy was referred after dental trauma that occurred on the previous day. The permanent maxillary right central incisor (tooth 11 had been avulsed. The tooth was hand-held during endodontic therapy and an intracanal medication application with calcium hydroxide-based paste was performed. An apical plug with mineral trioxide aggregate (MTA was introduced into the apical portion of the canal. When the avulsed tooth was replanted with digital pressure, a blood clot had formed within the socket, which moved the MTA apical plug about 2 mm inside of the root canal. These procedures developed apical revascularization, which promoted a successful endodontic outcome, evidenced by apical closure, slight increase in root length, and absence of signs of external root resorption, during a follow-up of 1 year and 6 months.

X-ray micro-analysis of the mineralization patterns in developing enamel in hamster tooth germs exposed to fluoride in vitro during the secretory phase of amelogenesis

International Nuclear Information System (INIS)

Lyaruu, D.M.; Blijleven, N.; Hoeben-Schornagel, K.; Bronckers, A.L.; Woeltgens, J.H.

1989-01-01

The developing enamel from three-day-old hamster first maxillary (M1) molar tooth germs exposed to fluoride (F-) in vitro was analyzed for its mineral content by means of the energy-dispersive x-ray microanalysis technique. The aim of this study was to obtain semi-quantitative data on the F(-)-induced hypermineralization patterns in the enamel and to confirm that the increase in electron density observed in micrographs of F(-)-treated enamel is indeed due to an increase in mineral content in the fluorotic enamel. The tooth germs were explanted during the early stages of secretory amelogenesis and initially cultured for 24 hr in the presence of 10 ppm F- in the culture medium. The germs were then cultured for another 24 hr without F-. In order to compare the ultrastructural results directly with the microprobe data, we used the same specimens for both investigations. The net calcium counts (measurement minus background counts) in the analyses were used as a measure of the mineral content in the enamel. The aprismatic pre-exposure enamel, deposited in vivo before the onset of culture, was the most hypermineralized region in the fluorotic enamel, i.e., it contained the highest amount of calcium measured. The degree of the F(-)-induced hypermineralization gradually decreased (but was not abolished) in the more mature regions of the enamel. The unmineralized enamel matrix secreted during the initial F- treatment in vitro mineralized during the subsequent culture without F-. The calcium content in this enamel layer was in the same order of magnitude as that recorded for the newly deposited enamel in control tooth germs cultured without F-

Thyroid Function during Early Life and Dental Development

NARCIS (Netherlands)

Vucic, S.; Korevaar, T.I.; Dhamo, B.; Jaddoe, V.W.; Peeters, R.P.; Wolvius, E.B.; Ongkosuwito, E.M.

2017-01-01

Children with low levels of thyroid hormones (hypothyroidism) have delayed tooth eruption, enamel hypoplasia, micrognathia, and anterior open bite, whereas children with hyperthyroidism may suffer from accelerated tooth eruption, maxillary, and mandibular osteoporosis. However, it is still unknown

Epithelial topography for repetitive tooth formation

Directory of Open Access Journals (Sweden)

Marcia Gaete

2015-12-01

Full Text Available During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells.

A Radiographic Study of Fused and Geminated Tooth

Energy Technology Data Exchange (ETDEWEB)

Park, Chul Jae; Lee, Sang Rae [Dept. of Oral Radiology, College of Dentistry, Kyunhee University, Seoul (Korea, Republic of)

1990-02-15

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occurred in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1%, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 type, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type I (2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type IX (1 crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent used tooth, deciduous and permanent geminated tooth.

A Radiographic Study of Fused and Geminated Tooth

International Nuclear Information System (INIS)

Park, Chul Jae; Lee, Sang Rae

1990-01-01

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occurred in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1%, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 type, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type I (2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type IX (1 crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent used tooth, deciduous and permanent geminated tooth.

Analysis of tooth tissues using Raman spectroscopy

International Nuclear Information System (INIS)

Timchenko, E.V.; Timchenko, P.E.; Kulabukhova, A.Yu.; Volova, L.T.; Rosenbaum, A.Yu.

2016-01-01

The results of experimental studies of healthy tooth tissue and tooth tissues during caries disease are presented. Features of Raman spectrum of tooth tissues during caries disease are obtained: the main changes are detected at wavenumbers 956 cm -1 .1069 cm -1 . corresponding to phosphates. and 1241 cm -1 . 1660 cm -1 . corresponding to collagen III and collagen I. respectively. Were introduced criteria allowing to detect caries and to identify weakening of tooth tissues. preceding the caries. The reliability of research results is confirmed by scanning electron microscopy. (paper)

Primary culprit for tooth loss!!

Directory of Open Access Journals (Sweden)

Sailavanya Nuvvula

2016-01-01

Full Text Available Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A questionnaire containing 10 items was distributed to the dental practitioners, which included age, gender, no of teeth indicated for extraction, the reason for extraction, and the periodontal parameters that are involved with the extracted tooth and were requested to complete the form on every extraction they were to undertake. the study form was collected at the end of the study period and data was subjected to statistical analysis. Results: A total of 502 patients were enrolled during the study period, and a total of 1055 teeth were extracted for several reasons. we found that 51.14%extractions are due to dental caries in case of 20-30years age groups, which is more when compared to tooth loss due to periodontal diseases in this age group. whereas in case of >40years of age group periodontal diseases account for 54.11%, and dental caries accounts for only 29.11%. Showing more teeth were lost due to periodontal disease. Conclusion: therefore we concluded that, caries is the dominant reason for extraction in patients with 20–30 years of age while periodontal disease accounts for the majority of tooth extraction in patients older than 40 years.

Is tooth wear in the primary dentition predictive of tooth wear in the permanent dentition? Report from a longitudinal study.

LENUS (Irish Health Repository)

Harding, M A

2010-03-01

To determine the prevalence of tooth wear in the permanent dentition of a sample of 12-year-old school children and establish whether an association exists between tooth wear recorded now and tooth wear recorded in their primary dentition at age five.

FACTORS RELATED TO TOOTH LOSS AMONG INDUSTRIAL WORKERS IN PHATHUM THANI, THAILAND.

Science.gov (United States)

Jaaidee, Jeerateep; Chatrchaiwiwatana, Supaporn; Ratanasiri, Amornrat

2017-01-01

Tooth loss is an important oral health problem among Thai people. The objectives of this study were to evaluate the prevalence of and factors associated with tooth loss among Thai industrial workers in order to apply preventive oral health programs to this population. The study consisted of 1,500 adults working in Nava Nakorn Industrial Estate, Pathum Thani Province, Thailand in 2014. Probability proportion to size cluster sampling was used and 16 clusters were included in the study. An oral health questionnaire was developed, evaluated for content validity by experts and then given to participants to fill out. The study population consisted of 621 males (41.4%) and 879 females (58.6%) aged between 19-25 years. The overall prevalence of tooth loss was 62.2% and the major reason for tooth loss was dental caries (60%). Results from multivariable logistic regression analysis show that factors associated with tooth loss were: having a history of scaling or tooth cleaning [adjusted odds ratio (AOR)= 2.47; 95% CI: 1.21-4.65], having dental caries with exposed pulp (AOR=4.12; 95% CI: 3.26-7.67), having tooth mobility due to periodontal disease (AOR=2.41; 95% CI: 2.71-5.22), having needed tooth restoration (AOR=1.75; 95% CI: 1.23-2.65), having a history of maxillofacial or a temporo-mandibular joint accident (AOR=2.13; 95% CI: 1.87- 3.23), wearing dentures (AOR=2.58; 95% CI: 2.17-6.72), using dental care services during the previous year (AOR=2.21; 95% CI: 1.26-4.57), eating snacks and candy daily (AOR=2.14; 95% CI: 1.82-2.92), having toothache (AOR=2.64; 95% CI: 1.43- 3.92), having dental caries (AOR=2.23; 95% CI: 1.62-3.27) and having a history of orthodontic treatment (AOR=3.61; 95% CI: 1.84-5.68). The Nagelkerke R squared for the model was 0.42. Our findings suggest several clinical, socio-economic and lifestyle factors are associated with tooth loss among these Thai industrial workers. An appropriate preventive oral health program targeting this high-risk group taking

Computerized Modeling and Loaded Tooth Contact Analysis of Hypoid Gears Manufactured by Face Hobbing Process

Science.gov (United States)

Nishino, Takayuki

The face hobbing process has been widely applied in automotive industry. But so far few analytical tools have been developed. This makes it difficult for us to optimize gear design. To settle this situation, this study aims at developing a computerized tool to predict the running performances such as loaded tooth contact pattern, static transmission error and so on. First, based upon kinematical analysis of a cutting machine, a mathematical description of tooth surface generation is given. Second, based upon the theory of gearing and differential geometry, conjugate tooth surfaces are studied. Then contact lines are generated. Third, load distribution along contact lines is formulated. Last, the numerical model is validated by measuring loaded transmission error and loaded tooth contact pattern.

Risk factors of osteonecrosis of the jaw after tooth extraction in osteoporotic patients on oral bisphosphonates

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ho Gui; Hwang, Jae Joon; Lee, Jeong Hee; Kim, Young Hyun; Na, Ji Yeon; Han, Sang Sun [Dept. of Oral and Maxillofacial Radiology, Yonsei University, College of Dentistry, Seoul (Korea, Republic of)

2017-03-15

The aim of this study was to investigate the incidence of bisphosphonate-related osteonecrosis of the jaw (BRONJ) after tooth extraction in patients with osteoporosis on oral bisphosphonates in Korea and to evaluate local factors affecting the development of BRONJ. The clinical records of 320 patients who underwent dental extraction while receiving oral bisphosphonates were reviewed. All patients had a healing period of more than 6 months following the extractions. Each patient's clinical record was used to assess the incidence of BRONJ; if BRONJ occurred, a further radiographic investigation was carried out to obtain a more definitive diagnosis. Various local factors including age, gender, extraction site, drug type, duration of administration, and C-terminal telopeptide (CTx) level were retrieved from the patients' clinical records for evaluating their effect on the incidence of BRONJ. Among the 320 osteoporotic patients who underwent tooth extraction, 11 developed BRONJ, reflecting an incidence rate of 3.44%. Out of the local factors that may affect the incidence of BRONJ, gender, drug type, and CTx level showed no statistically significant effects, while statistically significant associations were found for age, extraction site, and duration of administration. The incidence of BRONJ increased with age, was greater in the mandible than the maxilla, and was associated with a duration of administration of more than 3 years. Tooth extraction in patients on oral bisphosphonates requires careful consideration of their age, the extraction site, and the duration of administration, and close postoperative follow-up should be carried out to facilitate effective early management.

Biologically Based Restorative Management of Tooth Wear

Directory of Open Access Journals (Sweden)

Martin G. D. Kelleher

2012-01-01

Full Text Available The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles.

Primary cilia regulate Shh activity in the control of molar tooth number

Czech Academy of Sciences Publication Activity Database

Ohazama, A.; Haycraft, C. J.; Seppala, M.; Ghafoor, S.; Cobourne, M.; Martinelli, D. C.; Fan, CH. M.; Peterková, Renata; Lesot, H.; Yoder, B. K.; Sharpe, P. T.

2009-01-01

Roč. 136, č. 6 (2009), s. 897-903 ISSN 0950-1991 R&D Projects: GA ČR GA304/07/0223; GA MŠk OC B23.002 Institutional research plan: CEZ:AV0Z50390512 Keywords : intraflagellar transport * supernumerary tooth * tooth development Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 7.194, year: 2009

Djebelemur, a tiny pre-tooth-combed primate from the Eocene of Tunisia: a glimpse into the origin of crown strepsirhines.

Directory of Open Access Journals (Sweden)

Laurent Marivaux

Full Text Available BACKGROUND: Molecular clock estimates of crown strepsirhine origins generally advocate an ancient antiquity for Malagasy lemuriforms and Afro-Asian lorisiforms, near the onset of the Tertiary but most often extending back to the Late Cretaceous. Despite their inferred early origin, the subsequent evolutionary histories of both groups (except for the Malagasy aye-aye lineage exhibit a vacuum of lineage diversification during most part of the Eocene, followed by a relative acceleration in diversification from the late Middle Eocene. This early evolutionary stasis was tentatively explained by the possibility of unrecorded lineage extinctions during the early Tertiary. However, this prevailing molecular view regarding the ancient origin and early diversification of crown strepsirhines must be viewed with skepticism due to the new but still scarce paleontological evidence gathered in recent years. METHODOLOGICAL/PRINCIPAL FINDINGS: Here, we describe new fossils attributable to Djebelemur martinezi, a≈50 Ma primate from Tunisia (Djebel Chambi. This taxon was originally interpreted as a cercamoniine adapiform based on limited information from its lower dentition. The new fossils provide anatomical evidence demonstrating that Djebelemur was not an adapiform but clearly a distant relative of lemurs, lorises and galagos. Cranial, dental and postcranial remains indicate that this diminutive primate was likely nocturnal, predatory (primarily insectivorous, and engaged in a form of generalized arboreal quadrupedalism with frequent horizontal leaping. Djebelemur did not have an anterior lower dentition as specialized as that characterizing most crown strepsirhines (i.e., tooth-comb, but it clearly exhibited a transformed antemolar pattern representing an early stage of a crown strepsirhine-like adaptation ("pre-tooth-comb". CONCLUSIONS/SIGNIFICANCE: These new fossil data suggest that the differentiation of the tooth-comb must postdate the djebelemurid

Djebelemur, a Tiny Pre-Tooth-Combed Primate from the Eocene of Tunisia: A Glimpse into the Origin of Crown Strepsirhines

Science.gov (United States)

Marivaux, Laurent; Ramdarshan, Anusha; Essid, El Mabrouk; Marzougui, Wissem; Ammar, Hayet Khayati; Lebrun, Renaud; Marandat, Bernard; Merzeraud, Gilles; Tabuce, Rodolphe; Vianey-Liaud, Monique

2013-01-01

Background Molecular clock estimates of crown strepsirhine origins generally advocate an ancient antiquity for Malagasy lemuriforms and Afro-Asian lorisiforms, near the onset of the Tertiary but most often extending back to the Late Cretaceous. Despite their inferred early origin, the subsequent evolutionary histories of both groups (except for the Malagasy aye-aye lineage) exhibit a vacuum of lineage diversification during most part of the Eocene, followed by a relative acceleration in diversification from the late Middle Eocene. This early evolutionary stasis was tentatively explained by the possibility of unrecorded lineage extinctions during the early Tertiary. However, this prevailing molecular view regarding the ancient origin and early diversification of crown strepsirhines must be viewed with skepticism due to the new but still scarce paleontological evidence gathered in recent years. Methodological/Principal Findings Here, we describe new fossils attributable to Djebelemur martinezi, a≈50 Ma primate from Tunisia (Djebel Chambi). This taxon was originally interpreted as a cercamoniine adapiform based on limited information from its lower dentition. The new fossils provide anatomical evidence demonstrating that Djebelemur was not an adapiform but clearly a distant relative of lemurs, lorises and galagos. Cranial, dental and postcranial remains indicate that this diminutive primate was likely nocturnal, predatory (primarily insectivorous), and engaged in a form of generalized arboreal quadrupedalism with frequent horizontal leaping. Djebelemur did not have an anterior lower dentition as specialized as that characterizing most crown strepsirhines (i.e., tooth-comb), but it clearly exhibited a transformed antemolar pattern representing an early stage of a crown strepsirhine-like adaptation (“pre-tooth-comb”). Conclusions/Significance These new fossil data suggest that the differentiation of the tooth-comb must postdate the djebelemurid divergence, a view

Large scale study of tooth enamel

International Nuclear Information System (INIS)

Bodart, F.; Deconninck, G.; Martin, M.T.

Human tooth enamel contains traces of foreign elements. The presence of these elements is related to the history and the environment of the human body and can be considered as the signature of perturbations which occur during the growth of a tooth. A map of the distribution of these traces on a large scale sample of the population will constitute a reference for further investigations of environmental effects. On hundred eighty samples of teeth were first analyzed using PIXE, backscattering and nuclear reaction techniques. The results were analyzed using statistical methods. Correlations between O, F, Na, P, Ca, Mn, Fe, Cu, Zn, Pb and Sr were observed and cluster analysis was in progress. The techniques described in the present work have been developed in order to establish a method for the exploration of very large samples of the Belgian population. (author)

Risk Factors of Early Childhood Caries among Dar es Salaam ...

African Journals Online (AJOL)

Background: Early childhood caries (ECC) describes caries experience on at least one primary tooth in children under six years of age. It is among the most common chronic diseases in young children and may develop as soon as the teeth erupt. Thus it presents a serious problem in pediatric dentistry not only because of ...

The Effect of Multiple Sulfatase Deficiency (MSD) on Dental Development: Can We Use the Teeth as an Early Diagnostic Tool?

Science.gov (United States)

Zilberman, Uri; Bibi, Haim

2016-01-01

Multiple sulfatase deficiency (MSD) is a rare autosomal recessive inborn error of metabolism due to reduced catalytic activity of the different sulfatase. Affected individuals show neurologic deterioration with mental retardation, skeletal anomalies, organomegaly, and skin changes as in X-linked ichthyosis. The only organ that was not examined in MSD patients is the dentition. To evaluate the effect of the metabolic error on dental development in a patient with the intermediate severe late-infantile form of MSD (S155P). Histological and chemical study were performed on three deciduous and five permanent teeth from MSD patient and pair-matched normal patients. Tooth germ size and enamel thickness were reduced in both deciduous and permanent MSD teeth, and the scalloping feature of the DEJ was missing in MSD teeth causing enamel to break off from the dentin. The mineral components in the enamel and dentin were different. The metabolic error insults the teeth in the stage of organogenesis in both the deciduous and permanent dentition. The end result is teeth with very sharp cusp tips, thin hypomineralized enamel, and exposed dentin due to the break off of enamel. These findings are different from all other types of MPS syndromes.Clinically the phenotype of intermediate severe late-infantile form of MSD appeared during the third year of life. In children of parents that are carriers, we can diagnose the disease as early as birth using X-ray radiograph of the anterior upper region or as early as 6-8 months when the first deciduous tooth erupt and consider very early treatment to ameliorate the symptoms.

Tooth loss prevalence among cardiac males and females

International Nuclear Information System (INIS)

Bokhari, S.A.H.; Khan, A.A.; Butt, A.K.

2007-01-01

Objective of study was to observe differences of tooth loss prevalence in males and females with Cardiac diseases Poor oral health, tooth loss and periodontal diseases have been reported to be associated with coronary heart diseases. Studies report gender differences in prevalence of cardiac diseases and tooth loss. This paper presents gender differences of tooth loss in cardiac patients of a cardiac hospital of Lahore, Pakistan. Methodology: Age matched Cardiac males and females attending OPD of the Punjab Institute of Cardiology (PIC), Lahore were included in the study. Personal and health-related information were questioned and noted. Oral examination was performed for recording of missing teeth. 1200 CHD study subjects with age-range of 30 to 80 years were enrolled for study. 1045 age matched, 766 (73.30%) males and 279 (26.70%) females were examined for tooth loss. 852 (81.53%) genders had at least one tooth missing. 599 (78.19) males and 253 (90.68%) females were observed with mean tooth loss of 7.5 (SD 8.720) and 11.15 (SD 10.375)respectively statistical association among them was also significant (P= 0.000) with OR of 2.339. More subjects (76.29%) showed a loss of 1-15 teeth that I was also significant among males and females. Tooth loss was significant in age groups of 41-50 years (P=0.001) and 51-60 years (P=0.000) Gender differences of tooth loss prevalence among CHD Subjects were significant with more risk for males as compared to females. (author)

Early healing of the alveolar process after tooth extraction: an experimental study in the beagle dog.

Science.gov (United States)

Discepoli, Nicola; Vignoletti, Fabio; Laino, Luigi; de Sanctis, Massimo; Muñoz, Fernando; Sanz, Mariano

2013-06-01

To describe the early healing events in the alveolar socket during the first 8 weeks of spontaneous healing after tooth extraction. 16 adult beagle dogs were selected and five healing periods were analysed (4 h, 1 week, 2 weeks, 4 weeks, 8 weeks). Mandibular premolars were extracted and each socket corresponding to the mesial root was left to heal undisturbed. In each healing period, three animals were euthanatized, each providing four study sites. Healing was assessed by descriptive histology and by histometric analysis using as landmarks: the vertical distance between buccal and lingual crest (B'L') and the width of buccal and lingual walls at three different levels. Differences between means for each variable for each healing period were compared (ANOVA; p healing period to a final value of 0.18 (0.08) mm. The lingual width (Lw) remains almost unchanged while the buccal width (Bw) at 1 (Bw1) and 2 (Bw2) mm was reduced in about 40% of its initial value. Minor vertical bone reduction in both the buccal and lingual socket walls were observed. A marked horizontal reduction of the buccal bone wall was observed mostly in its coronal aspect. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Development and evolution of the unique cetacean dentition

Directory of Open Access Journals (Sweden)

Brooke A. Armfield

2013-02-01

Full Text Available The evolutionary success of mammals is rooted in their high metabolic rate. A high metabolic rate is sustainable thanks to efficient food processing and that in turn is facilitated by precise occlusion of the teeth and the acquisition of rhythmic mastication. These major evolutionary innovations characterize most members of the Class Mammalia. Cetaceans are one of the few groups of mammals in which precise occlusion has been secondarily lost. Most toothed whales have an increased number of simple crowned teeth that are similar along the tooth row. Evolution toward these specializations began immediately after the time cetaceans transitioned from terrestrial-to-marine environments. The fossil record documents the critical aspects of occlusal evolution of cetaceans, and allows us to pinpoint the evolutionary timing of the macroevolutionary events leading to their unusual dental morphology among mammals. The developmental controls of tooth differentiation and tooth number have been studied in a few mammalian clades, but nothing is known about how these controls differ between cetaceans and mammals that retain functional occlusion. Here we show that pigs, a cetacean relative with regionalized tooth morphology and complex tooth crowns, retain the typical mammalian gene expression patterns that control early tooth differentiation, expressing Bmp4 in the rostral (mesial, anterior domain of the jaw, and Fgf8 caudally (distal, posterior. By contrast, dolphins have lost these regional differences in dental morphology and the Bmp4 domain is extended into the caudal region of the developing jaw. We hypothesize that the functional constraints underlying mammalian occlusion have been released in cetaceans, facilitating changes in the genetic control of early dental development. Such major developmental changes drive morphological evolution and are correlated with major shifts in diet and food processing during cetacean evolution.

Use of ultrasound Doppler to determine tooth vitality in a discolored tooth after traumatic injury: its prospects and limitations

Directory of Open Access Journals (Sweden)

Yong-Wook Cho

2014-02-01

Full Text Available When a tooth shows discoloration and does not respond to the cold test or electric pulp test (EPT after a traumatic injury, its diagnosis can be even more difficult due to the lack of proper diagnostic methods to evaluate its vitality. In these case reports, we hope to demonstrate that ultrasound Doppler might be successfully used to evaluate the vitality of the tooth after trauma, and help reduce unnecessary endodontic treatments. In all three of the present cases, the teeth were discolored after traumatic injuries and showed negative responses to the cold test and EPT. However, they showed distinctive vital reactions in the ultrasound Doppler test during the whole observation period. In the first case, the tooth color returned to normal, and the tooth showed a positive response to the cold test and EPT at 10 wk after the injury. In the second case, the tooth color had returned to its normal shade at 10 wk after the traumatic injury but remained insensitive to the cold test and EPT. In the third case, the discoloration was successfully treated with vital tooth bleaching.

Tooth Retained Implant: No More an Oxymoron

Directory of Open Access Journals (Sweden)

Divya Bhat

2011-03-01

Full Text Available Introduction: Periodontally af-fected teeth are treated in one of the two ways. (1 Tooth retention after periodontal surgery, in which the degree of regeneration achieved is unpredictable. (2 Tooth extrac-tion and implant placement. Implants have an osseointegrated surface which does not provide adequate shock absorption. Regeneration can be achieved by resecting the crown of the affected tooth and submerging the root. This technique has not had a clinical application so far as the tooth becomes difficult to restore. Placing an implant within the root can make the retained root restorable. At the same time, as the implant is placed within the root surface it achieves a periodontal integration which dampens occlusal forces better than osseointegration. Therefore, such a “tooth retained implant” may serve as an additional treatment option with significant benefits over tooth retention and implant placement alone. The hypothesis: Implants placed within retained roots have shown cementum deposition and attachment of periodontal ligament fibers over their surface. This periodontal attachment may be able to dam-pen forces better than in an osseointegrated implant. Moreover, since an implant is being placed, the crown of the tooth can be resected and submerged. This prevents epithelial migration, allows for the periodontal ligament cells to populate the wound and favors regeneration.Evaluation of the hypothesis: The technique of placing implants within cavities prepared in the root and then submerging them are simple for any practitioner placing implants routinely.

New method of control of tooth whitening

Science.gov (United States)

Angelov, I.; Mantareva, V.; Gisbrecht, A.; Valkanov, S.; Uzunov, Tz.

2010-10-01

New methods of control of tooth bleaching stages through simultaneous measurements of a reflected light and a fluorescence signal are proposed. It is shown that the bleaching process leads to significant changes in the intensity of a scattered signal and also in the shape and intensity of the fluorescence spectra. Experimental data illustrate that the bleaching process causes essential changes in the teeth discoloration in short time as 8-10 min from the beginning of the application procedure. The continuation of the treatment is not necessary moreover the probability of the enamel destroy increases considerably. The proposed optical back control of tooth surface is a base for development of a practical set up to control the duration of the bleaching procedure.

Three-dimensional analysis of the early development of the dentition

Czech Academy of Sciences Publication Activity Database

Peterková, Renata; Hovořáková, Mária; Peterka, Miroslav; Lesot, H.

2014-01-01

Roč. 59, Supplement 1 (2014), s. 55-80 ISSN 0045-0421 R&D Projects: GA ČR(CZ) GAP305/12/1766 Institutional support: RVO:68378041 Keywords : 3D reconstruction * tooth * development Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 1.104, year: 2014

THE INFLUENCE OF SHRINKAGE AND MOISTURE DIFFUSION ON IDEALIZED TOOTH STRUCTURE INVOLVING DEBONDING DAMAGE

Institute of Scientific and Technical Information of China (English)

FanJianping; TangChak-Yin

2005-01-01

This study highlights the joint effect of early polymerization shrinkage and longtermmoisture diffusion on the behavior of the restoration-tooth structure. The interphase debonding between particle and polymer resin in dental composite is taken into account by introducing the damage variable. The idealized model is designed and constructed for representing the restorationtooth structure, which consists of enamel, dentin, composite and interphase, each considered as homogenous material. The simulation is carried out using the general-purpose finite element software package, ABAQUS incorporated with a user subroutine for definition of damaged material behavior. The influence of Young's moduli of composite and interphase on stress and displacement is discussed. The compensating effect of water sorption on the polymerization shrinkage is examined with and without involving damage evolution. A comparison is made between the influence of hyper-, equi- and hypo-water sorption. Interfacial failure in the specific regions as well as cuspal movement has been predicated. The damage evolving in dental composite reduces the rigidity of composite, thus in turn reducing consequent stress and increasing consequent displacement. The development of stresses at the restoration-tooth interface can have a detrimental effect on the longevity of a restoration.

Autogenous Transplantation for Replacing a Hopeless Tooth.

Science.gov (United States)

Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

2017-01-01

Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption.

Death in the life of a tooth

Czech Academy of Sciences Publication Activity Database

Matalová, Eva; Tucker, A. S.; Sharpe, P. T.

2004-01-01

Roč. 83, č. 1 (2004), s. 11-16 ISSN 0022-0345 R&D Projects: GA ČR GP204/02/P112 Institutional research plan: CEZ:AV0Z5045916 Keywords : apoptosis * tooth development Subject RIV: EA - Cell Biology Impact factor: 3.131, year: 2004

New developed cylindrical TM010 mode EPR cavity for X-band in vivo tooth dosimetry.

Directory of Open Access Journals (Sweden)

Guo Junwang

Full Text Available EPR tooth in vivo dosimetry is an attractive approach for initial triage after unexpected nuclear events. An X-band cylindrical TM010 mode resonant cavity was developed for in vivo tooth dosimetry and used in EPR applications for the first time. The cavity had a trapezoidal measuring aperture at the exact position of the cavity's cylindrical wall where strong microwave magnetic field H1 concentrated and weak microwave electric field E1 distributed. Theoretical calculations and simulations were used to design and optimize the cavity parameters. The cavity features were evaluated by measuring DPPH sample, intact incisor samples embed in a gum model and the rhesus monkey teeth. The results showed that the cavity worked at designed frequency and had the ability to make EPR spectroscopy in relative high sensitivity. Sufficient modulation amplitude and microwave power could be applied into the aperture. Radiation induced EPR signal could be observed remarkably from 1 Gy irradiated intact incisor within only 30 seconds, which was among the best in scan time and detection limit. The in vivo spectroscopy was also realized by acquiring the radiation induced EPR signal from teeth of rhesus monkey whose teeth was irradiated by dose of 2 Gy. The results suggested that the cavity was sensitive to meet the demand to assess doses of significant level in short time. This cavity provided a very potential option for the development of X-band in vivo dosimetry.

Coordination of Cellular Dynamics Contributes to Tooth Epithelium Deformations

Science.gov (United States)

Morita, Ritsuko; Kihira, Miho; Nakatsu, Yousuke; Nomoto, Yohei; Ogawa, Miho; Ohashi, Kazumasa; Mizuno, Kensaku; Tachikawa, Tetsuhiko; Ishimoto, Yukitaka; Morishita, Yoshihiro; Tsuji, Takashi

2016-01-01

The morphologies of ectodermal organs are shaped by appropriate combinations of several deformation modes, such as invagination and anisotropic tissue elongation. However, how multicellular dynamics are coordinated during deformation processes remains to be elucidated. Here, we developed a four-dimensional (4D) analysis system for tracking cell movement and division at a single-cell resolution in developing tooth epithelium. The expression patterns of a Fucci probe clarified the region- and stage-specific cell cycle patterns within the tooth germ, which were in good agreement with the pattern of the volume growth rate estimated from tissue-level deformation analysis. Cellular motility was higher in the regions with higher growth rates, while the mitotic orientation was significantly biased along the direction of tissue elongation in the epithelium. Further, these spatio-temporal patterns of cellular dynamics and tissue-level deformation were highly correlated with that of the activity of cofilin, which is an actin depolymerization factor, suggesting that the coordination of cellular dynamics via actin remodeling plays an important role in tooth epithelial morphogenesis. Our system enhances the understanding of how cellular behaviors are coordinated during ectodermal organogenesis, which cannot be observed from histological analyses. PMID:27588418

A 5-year prospective study of single-tooth replacements supported by the Astra Tech implant: a pilot study

DEFF Research Database (Denmark)

Gotfredsen, Klaus

2004-01-01

BACKGROUND: Implant-supported single-tooth replacements are an increasingly used method to replace teeth, especially in young patients. Therefore, long-term validation of different treatment modalities with different implant systems is of great importance. PURPOSE: The aim of the present study...... was to make a biologic, technical, and aesthetic evaluation of single-tooth replacement supported by the Astra Tech implant (Astra Tech AB, Mölndal, Sweden) during a 5-year period. MATERIALS AND METHODS: Twenty patients were divided into two consecutively treated groups. In group A the implants were placed...... "early" in the extraction sockets, and standard single-tooth abutments were used. In group B the implants were placed "delayed," and preparable abutments were used. Clinical examinations including registration of plaque, bleeding, crown lengths, soft tissue marginal level, papilla height, complications...

21 CFR 872.3580 - Preformed gold denture tooth.

Science.gov (United States)

2010-04-01

... tooth in a fixed or removable partial denture. (b) Classification. Class I (general controls). The... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a...

A Systematic Study on Tooth Enamel Microstructures of Lambdopsalis bulla (Multituberculate, Mammalia)--Implications for Multituberculate Biology and Phylogeny.

Science.gov (United States)

Mao, Fangyuan; Wang, Yuanqing; Meng, Jin

2015-01-01

Tooth enamel microstructure is a reliable and widely used indicator of dietary interpretations and data for phylogenetic reconstruction, if all levels of variability are investigated. It is usually difficult to have a thorough examination at all levels of enamel structures for any mammals, especially for the early mammals, which are commonly represented by sparse specimens. Because of the random preservation of specimens, enamel microstructures from different teeth in various species are often compared. There are few examples that convincingly show intraspecific variation of tooth enamel microstructure in full dentition of a species, including multituberculates. Here we present a systematic survey of tooth enamel microstructures of Lambdopsalis bulla, a taeniolabidoid multituberculate from the Late Paleocene Nomogen Formation, Inner Mongolia. We examined enamel structures at all hierarchical levels. The samples are treated differently in section orientations and acid preparation and examined using different imaging methods. The results show that, except for preparation artifacts, the crystallites, enamel types, Schmelzmuster and dentition types of Lambdopsalis are relatively consistent in all permanent teeth, but the prism type, including the prism shape, size and density, may vary in different portions of a single tooth or among different teeth of an individual animal. The most common Schmelzmuster of the permanent teeth in Lambdopsalis is a combination of radial enamel in the inner and middle layers, aprismatic enamel in the outer layer, and irregular decussations in tooth crown area with great curvature. The prism seam is another comparably stable characteristic that may be a useful feature for multituberculate taxonomy. The systematic documentation of enamel structures in Lambdopsalis may be generalized for the enamel microstructure study, and thus for taxonomy and phylogenetic reconstruction, of multituberculates and even informative for the enamel study of

A Systematic Study on Tooth Enamel Microstructures of Lambdopsalis bulla (Multituberculate, Mammalia) - Implications for Multituberculate Biology and Phylogeny

Science.gov (United States)

Mao, Fangyuan; Wang, Yuanqing; Meng, Jin

2015-01-01

Tooth enamel microstructure is a reliable and widely used indicator of dietary interpretations and data for phylogenetic reconstruction, if all levels of variability are investigated. It is usually difficult to have a thorough examination at all levels of enamel structures for any mammals, especially for the early mammals, which are commonly represented by sparse specimens. Because of the random preservation of specimens, enamel microstructures from different teeth in various species are often compared. There are few examples that convincingly show intraspecific variation of tooth enamel microstructure in full dentition of a species, including multituberculates. Here we present a systematic survey of tooth enamel microstructures of Lambdopsalis bulla, a taeniolabidoid multituberculate from the Late Paleocene Nomogen Formation, Inner Mongolia. We examined enamel structures at all hierarchical levels. The samples are treated differently in section orientations and acid preparation and examined using different imaging methods. The results show that, except for preparation artifacts, the crystallites, enamel types, Schmelzmuster and dentition types of Lambdopsalis are relatively consistent in all permanent teeth, but the prism type, including the prism shape, size and density, may vary in different portions of a single tooth or among different teeth of an individual animal. The most common Schmelzmuster of the permanent teeth in Lambdopsalis is a combination of radial enamel in the inner and middle layers, aprismatic enamel in the outer layer, and irregular decussations in tooth crown area with great curvature. The prism seam is another comparably stable characteristic that may be a useful feature for multituberculate taxonomy. The systematic documentation of enamel structures in Lambdopsalis may be generalized for the enamel microstructure study, and thus for taxonomy and phylogenetic reconstruction, of multituberculates and even informative for the enamel study of

A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears

Science.gov (United States)

Lei, Yaguo; Liu, Zongyao; Wang, Delong; Yang, Xiao; Liu, Huan; Lin, Jing

2018-06-01

Tooth damage often causes a reduction in gear mesh stiffness. Thus time-varying mesh stiffness (TVMS) can be treated as an indication of gear health conditions. This study is devoted to investigating the mesh stiffness variations of a pair of external spur gears with tooth pitting, and proposes a new model for describing tooth pitting based on probability distribution. In the model, considering the appearance and development process of tooth pitting, we model the pitting on the surface of spur gear teeth as a series of pits with a uniform distribution in the direction of tooth width and a normal distribution in the direction of tooth height, respectively. In addition, four pitting degrees, from no pitting to severe pitting, are modeled. Finally, influences of tooth pitting on TVMS are analyzed in details and the proposed model is validated by comparing with a finite element model. The comparison results show that the proposed model is effective for the TVMS evaluations of pitting gears.

Health behaviors and family characteristics in early childhood influence caries development. A longitudinal study based on data from MoBa

Directory of Open Access Journals (Sweden)

Tove I. Wigen

2014-12-01

Full Text Available Background: Lifestyle diseases including dental caries are partly preventable, and associated with health behavior. Establishing favorable health behavior is one main challenge both in general and dental health services. The purpose of this paper was to focus on cross-disciplinary research that has the potential to prevent development of both dental caries and other lifestyle diseases. More specifically the aim was to study how family characteristics and health behavior in pregnancy and early childhood influence caries development in preschool children.Material and methods: Data from dental examination of 5 year old children in the public dental services was linked to data from MoBa. In total, 1348 children were followed from pregnancy to 5 years of age. The data has provided opportunity to follow longitudinally the development of oral health behavior in early childhood in a large sample, and to study associations between caries development during preschool age and information in the MoBa database.Results: Results from the studies showed that tooth brushing frequency established at 1.5 year of age was stable through preschool age. Caries development in preschool age was related to child and maternal risk behavior in early childhood and to characteristics of risk families.Conclusion: Cross-disciplinary research using MoBa data has given new knowledge on dental caries development in early childhood in Norway. This knowledge can be used in clinical practice both in general and dental health services to improve preventive efforts towards early childhood caries and other lifestyle diseases.

21 CFR 872.5525 - Preformed tooth positioner.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected bite...

Variables affecting orthodontic tooth movement with clear aligners.

Science.gov (United States)

Chisari, Justin R; McGorray, Susan P; Nair, Madhu; Wheeler, Timothy T

2014-04-01

In this study, we examined the impacts of age, sex, root length, bone levels, and bone quality on orthodontic tooth movement. Clear aligners were programmed to move 1 central incisor 1 mm over the course of 8 weeks. Thirty subjects, ages 19 to 64, were enrolled, and measurements were made on digital models (percentage of tooth movement goal achieved). Morphometric features and bone quality were assessed with cone-beam computed tomography. Data from this study were combined with data from 2 similar studies to increase the power for some analyses. The mean percentage of tooth movement goal achieved was 57% overall. Linear regression modeling indicated a cubic relationship between age and tooth movement, with a decreasing rate of movement from ages 18 to 35 years, a slightly increasing rate from ages 35 to 50, and a decreasing rate from ages 50 to 70. The final decreasing trend was not apparent for women. As would be expected, the correlation was significant between the percentage of the goal achieved and the cone-beam computed tomography superimposed linear measures of tooth movement. A significant negative correlation was found between tooth movement and the measurement apex to the center of rotation, but bone quality, as measured by fractal dimension, was not correlated with movement. The relationship between age and tooth movement is complex and might differ for male and female patients. Limited correlations with cone-beam computed tomography morphology and rate of tooth movement were detected. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Tooth resorption in cats: contribution of vitamin D and inflammation

NARCIS (Netherlands)

Vrieling, H.E.

2010-01-01

Tooth resorption in cats Tooth resorption affecting several teeth is a painful disease with a prevalence of up to 75% in household cats and is often accompanied by periodontitis. Tooth resorption is caused by an increased number and activity of tooth-resorbing odontoclasts, cells that share

Tooth fractures in canine clinical practice

International Nuclear Information System (INIS)

Capik, I.; Ledecky, V.; Sevcik, A.

2001-01-01

Tooth fractures constitute a considerable fraction of all tooth diseases. Out of the 5,370 dogs treated during four years, 492 were presented with dental problems and 28.3 % of the latter were treated for tooth fractures. Canines were the most frequently affected teeth (38.8 %), followed by premolars (33.1 %), incisors (25.9 %), and molars (2.2 %), 55.4 % of the patients with canine and incisor fractures being large breed dogs. Fractures of premolars (mostly of 108, 208) were divided evenly irrespective of breed or body size. Nonsurgical endodontic treatment yielded good therapeutic results in most cases, but repeated treatment was necessary in some patients

Role of multiple cusps in tooth fracture.

Science.gov (United States)

Barani, Amir; Bush, Mark B; Lawn, Brian R

2014-07-01

The role of multiple cusps in the biomechanics of human molar tooth fracture is analysed. A model with four cusps at the bite surface replaces the single dome structure used in previous simulations. Extended finite element modelling, with provision to embed longitudinal cracks into the enamel walls, enables full analysis of crack propagation from initial extension to final failure. The cracks propagate longitudinally around the enamel side walls from starter cracks placed either at the top surface (radial cracks) or from the tooth base (margin cracks). A feature of the crack evolution is its stability, meaning that extension occurs steadily with increasing applied force. Predictions from the model are validated by comparison with experimental data from earlier publications, in which crack development was followed in situ during occlusal loading of extracted human molars. The results show substantial increase in critical forces to produce longitudinal fractures with number of cuspal contacts, indicating a capacity for an individual tooth to spread the load during mastication. It is argued that explicit critical force equations derived in previous studies remain valid, at the least as a means for comparing the capacity for teeth of different dimensions to sustain high bite forces. Copyright © 2014 Elsevier Ltd. All rights reserved.

Canine tooth size and fitness in male mandrills (Mandrillus sphinx).

Science.gov (United States)

Leigh, Steven R; Setchell, Joanna M; Charpentier, Marie; Knapp, Leslie A; Wickings, E Jean

2008-07-01

Sexual selection theory explains the evolution of exaggerated male morphologies and weaponry, but the fitness consequences of developmental and age-related changes in these features remain poorly understood. This long-term study of mandrill monkeys (Mandrillus sphinx) demonstrates how age-related changes in canine tooth weaponry and adult canine size correlate closely with male lifetime reproductive success. Combining long-term demographic and morphometric data reveals that male fitness covaries simply and directly with canine ontogeny, adult maximum size, and wear. However, fitness is largely independent of other somatometrics. Male mandrills sire offspring almost exclusively when their canines exceed approximately 30 mm, or two-thirds of average adult value (45 mm). Moreover, sires have larger canines than nonsires. The tooth diminishes through wear as animals age, corresponding with, and perhaps influencing, reproductive senescence. These factors combine to constrain male reproductive opportunities to a brief timespan, defined by the period of maximum canine length. Sexually-selected weaponry, especially when it is nonrenewable like the primate canine tooth, is intimately tied to the male life course. Our analyses of this extremely dimorphic species indicate that sexual selection is closely intertwined with growth, development, and aging, pointing to new directions for sexual selection theory. Moreover, the primate canine tooth has potential as a simple mammalian system for testing genetically-based models of aging. Finally, the tooth may record details of life histories in fossil primates, especially when sexual selection has played a role in the evolution of dimorphism.

The Role of Mechanical Force in Molecular and Cellular during Orthodontic Tooth Movement

Directory of Open Access Journals (Sweden)

Ida Bagus Narmada

2012-10-01

Full Text Available Application of mechanical force on abnormally positioned tooth, cause changes in tooth location and transmitted to the bone ia the periodontal ligament (PDL produce orthodontic tooth movement. This force application is further way that remodeling in the area occurs. In order to develop biological strategies for enhancing this movement of teeth in bone, the underlying mechanisms of bone resorption and apposition should be understood in detail. Analysis of gingival crevicular fluid (GCF may be a good means of examining the on going molecular and cellular process associated with gingival and bone turnover during orthodontic tooth movement. If it could be possible to biologically monitor and predict the outcome of orthodontic force, then the appliance management could be based on dividual tissue response and the effectiveness of the treatment could be improved and understanding their biology is critical to finding ways to modify bone biology to move teeth faster. The present article reviewed a short introduction to some mayors advanced mechanical force in molecular and cellular biology during orthodontic tooth movement.DOI: 10.14693/jdi.v15i3.30

Measurement of opalescence of tooth enamel.

Science.gov (United States)

Lee, Yong-Keun; Yu, Bin

2007-08-01

Opalescent dental esthetic restoratives look natural and esthetic in any light, react to light in the same manner as the natural tooth and show improved masking effect. The objective of this study was to determine the opalescence of tooth enamel with reflection spectrophotometers. Color of intact bovine and human enamel was measured in the reflectance and transmittance modes. Two kinds of spectrophotometers were used for bovine and one kind was used for human enamel. The opalescence parameter (OP) was calculated as the difference in yellow-blue color coordinate (CIE Deltab(*)) and red-green color coordinate (CIE Deltaa(*)) between the reflected and transmitted colors. Mean OP value of bovine enamel was 10.6 (+/-1.4) to 19.0 (+/-2.1), and varied by the configuration of spectrophotometers. Mean OP value of human enamel was 22.9 (+/-1.9). Opalescence varied by the configuration of measuring spectrophotometer and the species of enamel. These values could be used in the development of esthetic restorative materials.

Tooth cusp sharpness as a dietary correlate in great apes.

Science.gov (United States)

Berthaume, Michael A

2014-02-01

Mammalian molars have undergone heavy scrutiny to determine correlates between morphology and diet. Here, the relationship between one aspect of occlusal morphology, tooth cusp radius of curvature (RoC), and two broad dietary categories, folivory and frugivory, is analyzed in apes. The author hypothesizes that there is a relationship between tooth cusp RoC and diet, and that folivores have sharper teeth than frugivores, and further test the correlation between tooth cusp RoC and tooth cusp size. Eight measures of tooth cusp RoC (two RoCs per cusp) were taken from 53 M(2) s from four species and subspecies of frugivorous apes (Pongo pygmaeus, Pan troglodytes troglodytes, Pan troglodytes schweinfurthii, and Gorilla gorilla gorilla) and two subspecies of folivorous apes (Gorilla beringei beringei, and Gorilla beringei graueri). Phylogenetically corrected ANOVAs were run on the full dataset and several subsets of the full dataset, revealing that, when buccolingual RoCs are taken into account, tooth cusp RoCs can successfully differentiate folivores and frugivores. PCAs revealed that folivores consistently had duller teeth than frugivores. In addition, a weak, statistically significant positive correlation exists between tooth cusp size and tooth cusp RoC. The author hypothesizes differences in tooth cusp RoC are correlated with wear rates, where, per vertical unit of wear, duller cusps will have a longer length of exposed enamel ridge than sharper cusps. More data need to be gathered to determine if the correlation between tooth cusp RoC and tooth cusp size holds true when small primates are considered. Copyright © 2013 Wiley Periodicals, Inc.

All-optical photoacoustic imaging and detection of early-stage dental caries

Science.gov (United States)

Sampathkumar, Ashwin; Hughes, David A.; Longbottom, Chris; Kirk, Katherine J.

2015-02-01

Dental caries remain one of the most common oral diseases in the world. Current detection methods, such as dental explorer and X-ray radiography, suffer from poor sensitivity and specificity at the earliest (and reversible) stages of the disease because of the small size (tooth decay. This AOPAI system provides a non-contact, non-invasive and non-ionizing means of detecting early-stage dental caries. Ex-vivo teeth exhibiting early-stage, white-spot lesions were imaged using AOPAI. Experimental scans targeted each early-stage lesion and a reference healthy enamel region. Photoacoustic (PA) signals were generated in the tooth using a 532-nm pulsed laser and the light-induced broadband ultrasound signal was detected at the surface of the tooth with an optical path-stabilized Michelson interferometer operating at 532 nm. The measured time-domain signal was spatially resolved and back-projected to form 2D and 3D maps of the lesion using k-wave reconstruction methods. Experimental data collected from areas of healthy and diseased enamel indicate that the lesion generated a larger PA response compared to healthy enamel. The PA-signal amplitude alone was able to detect a lesion on the surface of the tooth. However, time- reversal reconstructions of the PA scans also quantitatively depicted the depth of the lesion. 3D PA reconstruction of the diseased tooth indicated a sub-surface lesion at a depth of 0.6 mm, in addition to the surface lesion. These results suggest that our AOPAI system is well suited for rapid clinical assessment of early-stage dental caries. An overview of the AOPAI system, fine-resolution PA and histology results of diseased and healthy teeth will be presented.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Dentist Your Family's Oral Health About the AGD Dental care and oral health information you need from ... Menstrual Calendar for Tooth Extraction Learn what those dental words mean. The Life of a Tooth Home | ...

Gastroesophageal Reflux Disease and Tooth Erosion

Directory of Open Access Journals (Sweden)

Sarbin Ranjitkar

2012-01-01

Full Text Available The increasing prevalence of gastroesophageal reflux disease (GERD in children and adults, and of “silent refluxers” in particular, increases the responsibility of dentists to be alert to this potentially severe condition when observing unexplained instances of tooth erosion. Although gastroesophageal reflux is a normal physiologic occurrence, excessive gastric and duodenal regurgitation combined with a decrease in normal protective mechanisms, including an adequate production of saliva, may result in many esophageal and extraesophageal adverse conditions. Sleep-related GERD is particularly insidious as the supine position enhances the proximal migration of gastric contents, and normal saliva production is much reduced. Gastric acid will displace saliva easily from tooth surfaces, and proteolytic pepsin will remove protective dental pellicle. Though increasing evidence of associations between GERD and tooth erosion has been shown in both animal and human studies, relatively few clinical studies have been carried out under controlled trial conditions. Suspicion of an endogenous source of acid being associated with observed tooth erosion requires medical referral and management of the patient as the primary method for its prevention and control.

Tooth positioners and their effects on treatment outcome.

Science.gov (United States)

Pravindevaprasad, A; Therese, Beena Agnes

2013-07-01

Malocclusion can also be corrected by means of clear removable appliances called as "tooth positioners" or "aligners". A tooth positioner is used to control settling and to minimize or eliminate relapse of the teeth after an orthodontic treatment. In this article, a complete review of the objectives, course of treatment, fabrication, and the materials used for fabrication of tooth positioners along with their importance and disadvantages were discussed. Tooth positioners did improve the overall orthodontic treatment outcome as quantified by the ABO (American Board of orthodontics) objective scoring method. But once the initial occlusal contact was achieved, the vertical movement of teeth was found to be inhibited.

Three dimensional mathematical model of tooth for finite element analysis

Directory of Open Access Journals (Sweden)

Puškar Tatjana

2010-01-01

Full Text Available Introduction. The mathematical model of the abutment tooth is the starting point of the finite element analysis of stress and deformation of dental structures. The simplest and easiest way is to form a model according to the literature data of dimensions and morphological characteristics of teeth. Our method is based on forming 3D models using standard geometrical forms (objects in programmes for solid modeling. Objective. Forming the mathematical model of abutment of the second upper premolar for finite element analysis of stress and deformation of dental structures. Methods. The abutment tooth has a form of a complex geometric object. It is suitable for modeling in programs for solid modeling SolidWorks. After analyzing the literature data about the morphological characteristics of teeth, we started the modeling dividing the tooth (complex geometric body into simple geometric bodies (cylinder, cone, pyramid,.... Connecting simple geometric bodies together or substricting bodies from the basic body, we formed complex geometric body, tooth. The model is then transferred into Abaqus, a computational programme for finite element analysis. Transferring the data was done by standard file format for transferring 3D models ACIS SAT. Results. Using the programme for solid modeling SolidWorks, we developed three models of abutment of the second maxillary premolar: the model of the intact abutment, the model of the endodontically treated tooth with two remaining cavity walls and the model of the endodontically treated tooth with two remaining walls and inserted post. Conclusion Mathematical models of the abutment made according to the literature data are very similar with the real abutment and the simplifications are minimal. These models enable calculations of stress and deformation of the dental structures. The finite element analysis provides useful information in understanding biomechanical problems and gives guidance for clinical research.

Generation of gear tooth surfaces by application of CNC machines

Science.gov (United States)

Litvin, F. L.; Chen, N. X.

1994-01-01

This study will demonstrate the importance of application of computer numerically controlled (CNC) machines in generation of gear tooth surfaces with new topology. This topology decreases gear vibration and will extend the gear capacity and service life. A preliminary investigation by a tooth contact analysis (TCA) program has shown that gear tooth surfaces in line contact (for instance, involute helical gears with parallel axes, worm gear drives with cylindrical worms, etc.) are very sensitive to angular errors of misalignment that cause edge contact and an unfavorable shape of transmission errors and vibration. The new topology of gear tooth surfaces is based on the localization of bearing contact, and the synthesis of a predesigned parabolic function of transmission errors that is able to absorb a piecewise linear function of transmission errors caused by gear misalignment. The report will describe the following topics: description of kinematics of CNC machines with six degrees of freedom that can be applied for generation of gear tooth surfaces with new topology. A new method for grinding of gear tooth surfaces by a cone surface or surface of revolution based on application of CNC machines is described. This method provides an optimal approximation of the ground surface to the given one. This method is especially beneficial when undeveloped ruled surfaces are to be ground. Execution of motions of the CNC machine is also described. The solution to this problem can be applied as well for the transfer of machine tool settings from a conventional generator to the CNC machine. The developed theory required the derivation of a modified equation of meshing based on application of the concept of space curves, space curves represented on surfaces, geodesic curvature, surface torsion, etc. Condensed information on these topics of differential geometry is provided as well.

Tooth-marked small theropod bone: an extremely rare trace

DEFF Research Database (Denmark)

Jacobsen, Aase Roland

2001-01-01

Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

Association between Severity of Tooth Wear and Dentinal Hypersensitivity

Directory of Open Access Journals (Sweden)

Ashok Ayer

2016-11-01

Full Text Available Background & Objectives: Tooth wear (attrition, abrasion, erosion, and abfraction is perceived globally as ever increasing problem. Several outcome of the tooth wear are hypersensitivity, esthetic problems, functional impairment, annoyance to the patient, and fracture of the tooth. Among these, the measurable and more commonly reported outcome is hypersensitivity to stimuli. Although dentin hypersensitivity is a common clinical condition and is generally reported by the patient after experiencing a sharp, short pain caused by one of the several different external stimuli, it is often inadequately understood. None of the scientific literature available till date attempted to establish the relationship between tooth wear and dentin hypersensitivity which could be a key factor in monitoring those patients.  The aim of the study was to estimate the association between severity of teeth wear and sensitivity in the patients with reported dentinal hypersensitivity.Materials & Methods: Fifty patients with dentin hypersensitivity were investigated for tooth wear. Tooth wear measured using exact tooth wear index and level of sensitivity to stimuli was recorded using a numerical rating scale. Results: Enamel wear at cervical region of teeth showed a positive correlation (p=.010, similarly, dentin wear at cervical region of teeth showed positive correlation and significant association (p<.001 with dentinal hypersensitivity.Conclusion: The observation supports a significant association between severities of tooth surface wear and dentinal hypersensitivity.

Orientation and deformation of mineral crystals in tooth surfaces.

Science.gov (United States)

Fujisaki, Kazuhiro; Todoh, Masahiro; Niida, Atsushi; Shibuya, Ryota; Kitami, Shunsuke; Tadano, Shigeru

2012-06-01

Tooth enamel is the hardest material in the human body, and it is mainly composed of hydroxyapatite (HAp)-like mineral particles. As HAp has a hexagonal crystal structure, X-ray diffraction methods can be used to analyze the crystal structure of HAp in teeth. Here, the X-ray diffraction method was applied to the surface of tooth enamel to measure the orientation and strain of the HAp crystals. The c-axis of the hexagonal crystal structure of HAp was oriented to the surface perpendicular to the tooth enamel covering the tooth surface. Thus, the strain of HAp at the surface of teeth was measured by X-ray diffraction from the (004) lattice planes aligned along the c-axis. The X-ray strain measurements were conducted on tooth specimens with intact surfaces under loading. Highly accurate strain measurements of the surface of tooth specimens were performed by precise positioning of the X-ray irradiation area during loading. The strains of the (004) lattice plane were measured at several positions on the surface of the specimens under compression along the tooth axis. The strains were obtained as tensile strains at the labial side of incisor tooth specimens. In posterior teeth, the strains were different at different measurement positions, varying from tensile to compressive types. Copyright © 2012 Elsevier Ltd. All rights reserved.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Child First See a Dentist? The History of Dental Advances Why is Oral Health Important for Men? What is Baby Bottle Tooth Decay? Learn what those dental words mean. The Life of a Tooth Home | ...

Inhibitory effect of interferon-γ on experimental tooth movement in mice.

Science.gov (United States)

Kohara, Haruka; Kitaura, Hideki; Yoshimatsu, Masako; Fujimura, Yuji; Morita, Yukiko; Eguchi, Toshiko; Yoshida, Noriaki

2012-09-01

The aim of this study was to investigate the effects of interferon (IFN)-γ on experimental tooth movement in mice using a murine experimental tooth movement model. An Ni-Ti closed-coil spring was inserted between the upper-anterior alveolar bones and the upper-left first molars in mice. We evaluated the relationship between local Ifn-γ mRNA levels and orthodontic tooth movement. In other experiments, IFN-γ was injected adjacent to each first molar every other day during tooth movement. After 12 days, the amount of tooth movement was measured. Tartrate-resistant acid phosphatase (TRAP)-positive cells at the pressure side of each experimental tooth were counted as osteoclasts. Local Ifn-γ mRNA expression increased with orthodontic tooth movement. The number of TRAP-positive cells increased on the pressure side of the first molar. In contrast, the degree of tooth movement and the number of TRAP-positive cells on the pressure side in IFN-γ-injected mice were less than those of control mice. IFN-γ was induced in experimental tooth movement, and could inhibit mechanical force-loaded osteoclastogenesis and tooth movement. These results suggest that IFN-γ might be useful in controlling orthodontic tooth movement because of its inhibitory action on excessive osteoclastogenesis during this movement.

Tooth bleaching and young adults in Nigeria: knowledge, experiences and intention.

Science.gov (United States)

Azodo, C C; Ogbomo, A C; Agbor, M A

2012-12-01

To assess the knowledge, experiences and intention to have tooth bleaching among young adults studying in a Nigerian University. A cross-section of part-time undergraduate students of University of Benin, Benin City, Nigeria were studied in 2010 using a self-administered questionnaire. About three-quarters 289 (72.4%) of the respondents reported awareness of at least one cause of tooth discoloration. A total of 143 (35.8%) of the respondents have heard of tooth bleaching with main sources of information being friends/relatives, dentists and the internet. One-third 132 (33.1%) of the respondents correctly identified that the aim of tooth bleaching was to make the teeth whiter. The respondents that had correct knowledge about mechanism, duration and complications of tooth bleaching were 51 (12.8%), 25 (6.3%) and 35 (8.8%) respectively. The major perceived benefits of tooth bleaching reported by the respondents were self confidence boost 152 (38.1%) and improvement of one's beauty 107 (26.8%). Out of the 68 (17.0%) respondents that have attempted tooth bleaching, 36 (52.9%) used tooth whitening toothpaste. Out of the 151 (37.8%) respondents that expressed intention of having tooth bleaching procedure, 32 (21.2%) would pursue the course, no matter the cost. In the studied population, knowledge of tooth discoloration was high, awareness and experiences of tooth bleaching were low but significant number expressed intention of having tooth bleaching. It is important that dentists increase oral health information particularly tooth bleaching information accessibility to the young adult population to improve the knowledge and prevent adverse effects.

Tooth Decay Process: How to Reverse It and Avoid a Cavity

Science.gov (United States)

... Health Info Health Topics Tooth Decay Tooth decay (dental caries) is damage to a tooth that can happen ... Clinical Trials Show All Clinical Trials Data & Statistics Dental caries (tooth decay) remains the most prevalent chronic disease ...

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Cracked tooth syndrome: A report of three cases.

Science.gov (United States)

Sadasiva, Kadandale; Ramalingam, Sathishmuthukumar; Rajaram, Krishnaraj; Meiyappan, Alagappan

2015-08-01

Cracked tooth syndrome (CTS), the term was coined by Cameron in 1964, which refers to an incomplete fracture of a vital posterior tooth extending to the dentin and occasionally into the pulp. CTS has always been a nightmare to the patient because of its unpredictable symptoms and a diagnostic dilemma for the dental practitioner due to its variable, bizarre clinical presentation. The treatment planning and management of CTS has also given problems and challenges the dentist as there is no specific treatment option. The management of CTS varies from one case to another or from one tooth to another in the same individual based on the severity of the symptoms and depth of tooth structure involved. After all, the prognosis of such tooth is still questionable and requires continuous evaluation. This article aims at presenting a series three cases of CTS with an overview on the clinical presentation, diagnosis and the different treatment options that varies from one case to another.

Chapter 3: Design of the Saber-Tooth Project.

Science.gov (United States)

Ward, Phillip

1999-01-01

Used data from interviews, surveys, and document analysis to describe the methods and reform processes of the Saber Tooth Project, examining selection of sites; demographics (school sites, teachers, data sources, and project assumptions); and project phases (development, planning, implementation, and support). The project's method of reform was…

Factors associated with tooth loss and prosthodontic status among Sudanese adults.

Science.gov (United States)

Khalifa, Nadia; Allen, Patrick F; Abu-bakr, Neamat H; Abdel-Rahman, Manar E

2012-01-01

A study was conducted to determine the degree of tooth loss, factors influencing tooth loss, and the extent of prosthodontic rehabilitation in Sudanese adults (≥ 16 years old) attending outpatient clinics in Khartoum State. Pearson and multivariate analyses were used to examine the relationships between tooth loss and specific characteristics determined through interviews and clinical examinations. The mean number of missing teeth was 3.6 (SD, 4.9) and the prevalence of edentulism was 0.1%. The prevalence of tooth loss (missing at least one tooth) was 78%; 66.9% of tooth loss was due to caries, and 11.2% was attributable to other reasons. Prosthetic replacement of missing teeth was evident in 3%, whereas a need for prosthetic replacement was evident in 57%. Having teeth was associated with age, gender, and socioeconomic status; tooth loss due to caries was associated with age, tribe, frequency of tooth-brushing, and a low rate of dental consultation. Tooth loss due to other reasons was associated with age, tribe, education, periodontal pocketing, tobacco use, tooth wear, and prosthetic status. The results of the present study indicated that the major cause of tooth loss was dental caries, thus emphasizing the importance of a public prevention-based healthcare program. Replacement of missing teeth was uncommon in the study subjects, which may reflect lack of access to this type of oral healthcare.

Contaminated tooth brushes-potential threat to oral and general health

Directory of Open Access Journals (Sweden)

Rashmi Naik

2015-01-01

Full Text Available Background: Tooth brushing is most common method of maintaining oral hygiene. In removing plaque and other soft debris from the teeth, tooth brushes become contaminated with bacteria, blood, saliva and oral debris. These contaminated tooth brushes can be a source of infection. Aims and objectives: The aim of the present study was to evaluate the presence of microorganisms in the tooth brushes and to investigate the effect of disinfectants such as chlorhexidine gluconate, sodium hypochlorite and water to decontaminate them. Materials and Methods: Twenty-one children were asked to brush their teeth for 5 days with a tooth brush. The tooth brushes were put in Robertson′s Cooked Meat broth and were observed for growth of Streptococcal microorganisms. These tooth brushes were then placed in disinfectants such as 0.2% chlorhexidine gluconate (Group I, 1% sodium hypochlorite (Group II and water (Group III for 24 hrs and then cultured again. Reduction of growth of microorganisms was seen in Group I, Group II and remnants of growth seen in Group III. Conclusion: We conclude that the use of disinfectant for a tooth brush is a must for every individual at least at regular intervals.

The role of microbial iron reduction in the formation of Proterozoic molar tooth structures

Science.gov (United States)

Hodgskiss, Malcolm S. W.; Kunzmann, Marcus; Poirier, André; Halverson, Galen P.

2018-01-01

Molar tooth structures are poorly understood early diagenetic, microspar-filled voids in clay-rich carbonate sediments. They are a common structure in sedimentary successions dating from 2600-720 Ma, but do not occur in rocks older or younger, with the exception of two isolated Ediacaran occurrences. Despite being locally volumetrically significant in carbonate rocks of this age, their formation and disappearance in the geological record remain enigmatic. Here we present iron isotope data, supported by carbon and oxygen isotopes, major and minor element concentrations, and total organic carbon and sulphur contents for 87 samples from units in ten different basins spanning ca. 1900-635 Ma. The iron isotope composition of molar tooth structures is almost always lighter (modal depletion of 2‰) than the carbonate or residue components in the host sediment. We interpret the isotopically light iron in molar tooth structures to have been produced by dissimilatory iron reduction utilising Fe-rich smectites and Fe-oxyhydroxides in the upper sediment column. The microbial conversion of smectite to illite results in a volume reduction of clay minerals (∼30%) while simultaneously increasing pore water alkalinity. When coupled with wave loading, this biogeochemical process is a viable mechanism to produce voids and subsequently precipitate carbonate minerals. The disappearance of molar tooth structures in the mid-Neoproterozoic is likely linked to a combination of a decrease in smectite abundance, a decline in the marine DIC reservoir, and an increase in the concentration of O2 in shallow seawater.

Effect of Melamine Sponge on Tooth Stain Removal.

Science.gov (United States)

Otsuka, Takero; Kawata, Toshitsugu

2015-01-01

To investigate the stain removal ability of melamine sponge before aesthetic tooth whitening in extracted teeth. Melamine sponge of thickness 40 mm was compressed and the destruction of the partition wall structure during the compression process was examined under a stereoscopic microscope. An extracted human tooth was cleaned by normal polishing or with melamine sponge for 90 s. To evaluate the stain level, the tooth surfaces were photographed under a stereoscopic microscope at 0, 30, 60 and 90 s. The residual stained region was traced in a high-magnification photograph, and the stain intensity was presented as a change, relative to the intensity before the experiment (0 s). Mechanical cleaning by toothbrushing produced polishing scratches on the tooth surface, whereas use of the melamine sponge resulted in only minimal scratches. As the compression level increased, the stain-removing effect tended to become stronger. Melamine sponge can remove stains from the tooth surface more effectively and less invasively compared to a conventional toothbrush. As no new scratches are made on the tooth surface when using a melamine sponge brush, the risk of re-staining is reduced. Cleaning using a melamine sponge brush can be easily and effectively performed at home and in a dental office.

The effect of buccal corticotomy on accelerating orthodontic tooth movement of maxillary canine

Science.gov (United States)

Jahanbakhshi, Mohammad Reza; Motamedi, Ali Mohammad Kalantar; Feizbakhsh, Masoud; Mogharehabed, Ahmad

2016-01-01

Background: Selective alveolar corticotomy is defined as an intentional injury to cortical bone. This technique is an effective means of accelerating orthodontic tooth movement. The aim of this study is to evaluate the effect of buccal corticotomy in accelerating maxillary canine retraction. Materials and Methods: The sample in this clinical trial study consisted of 15 adult female patients with therapeutic need for extraction of maxillary first premolars and maximum canine retraction. By use of split-mouth design, at the time of premolars extraction, buccal corticotomy was performed around the maxillary first premolar, randomly on one side of maxilla, and the other side was reserved as the control side. Canine retraction was performed by use of friction – less mechanic with simple vertical loop. Every 2 weeks, distance between canines and second premolars was measured until complete space closure. The velocity of space closure was calculated to evaluate the effect of this technique in accelerating orthodontic tooth movement. The obtained data were statistically analyzed using independent t-test, and the significance was set at 0.05. Results: The rate of canine retraction was significantly higher on the corticotomy side than the control side by an average of 1.8 mm/month versus 1.1 mm/month in the corticotomy side and control side, respectively (P orthodontic tooth movement about two times faster than conventional orthodontics and it is significant in early stages after surgical porsedure. Therefore Buccal corticotomy is a useful adjunct technique for accelerating orthodontic tooth movement. PMID:27605986

Palatal radicular groove: Clinical implications of early diagnosis and surgical sealing

Directory of Open Access Journals (Sweden)

P Corrêa-Faria

2011-01-01

Full Text Available Palatal radicular groove is a discreet alteration in tooth morphology, characterized by an invagination that begins near the cingulum of the tooth and moves in an apical direction. Clinically, palatal radicular groove may be associated with periodontal and/or endodontic problems. This paper describes a clinical case of a young patient with palatal radicular groove with no signs of periodontal disease or endodontic impairment. An early diagnosis was made and treatment consisted of surgical sealing of the defect. After a 2-year period, reexaminations demonstrated adequate hygiene, maintenance of tooth vitality and periodontal health. The early diagnosis and sealing of the groove observed surgically made the root surface smooth, avoiding subgingival bacterial plaque buildup, and preventing possible periodontal and/or pulp impairment stemming from the defect.

Periodontal profile classes predict periodontal disease progression and tooth loss.

Science.gov (United States)

Morelli, Thiago; Moss, Kevin L; Preisser, John S; Beck, James D; Divaris, Kimon; Wu, Di; Offenbacher, Steven

2018-02-01

Current periodontal disease taxonomies have limited utility for predicting disease progression and tooth loss; in fact, tooth loss itself can undermine precise person-level periodontal disease classifications. To overcome this limitation, the current group recently introduced a novel patient stratification system using latent class analyses of clinical parameters, including patterns of missing teeth. This investigation sought to determine the clinical utility of the Periodontal Profile Classes and Tooth Profile Classes (PPC/TPC) taxonomy for risk assessment, specifically for predicting periodontal disease progression and incident tooth loss. The analytic sample comprised 4,682 adult participants of two prospective cohort studies (Dental Atherosclerosis Risk in Communities Study and Piedmont Dental Study) with information on periodontal disease progression and incident tooth loss. The PPC/TPC taxonomy includes seven distinct PPCs (person-level disease pattern and severity) and seven TPCs (tooth-level disease). Logistic regression modeling was used to estimate relative risks (RR) and 95% confidence intervals (CI) for the association of these latent classes with disease progression and incident tooth loss, adjusting for examination center, race, sex, age, diabetes, and smoking. To obtain personalized outcome propensities, risk estimates associated with each participant's PPC and TPC were combined into person-level composite risk scores (Index of Periodontal Risk [IPR]). Individuals in two PPCs (PPC-G: Severe Disease and PPC-D: Tooth Loss) had the highest tooth loss risk (RR = 3.6; 95% CI = 2.6 to 5.0 and RR = 3.8; 95% CI = 2.9 to 5.1, respectively). PPC-G also had the highest risk for periodontitis progression (RR = 5.7; 95% CI = 2.2 to 14.7). Personalized IPR scores were positively associated with both periodontitis progression and tooth loss. These findings, upon additional validation, suggest that the periodontal/tooth profile classes and the derived

Safety issues of tooth whitening using peroxide-based materials.

Science.gov (United States)

Li, Y; Greenwall, L

2013-07-01

In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

Effect of light energy on peroxide tooth bleaching.

Science.gov (United States)

Luk, Karen; Tam, Laura; Hubert, Manfred

2004-02-01

Light-activated bleaching is a method of tooth whitening. The authors conducted a study to compare the whitening effects and tooth temperature changes induced by various combinations of peroxide bleaches and light sources. The authors randomly assigned 250 extracted human teeth halves into experimental groups (n = 10). A placebo gel (control), a 35 percent hydrogen peroxide or a 10 percent carbamide peroxide bleach was placed on the tooth surface and was irradiated with no light (control); a halogen curing light; an infrared, or IR, light; an argon laser; or a carbon dioxide, or CO2, laser. Color changes were evaluated immediately, one day and one week after treatment using a value-oriented shade guide and an electronic dental color analyzer. The outer enamel and inner dentin surface temperatures were monitored before and immediately after each 30-second application of light using a thermocouple thermometer. Color and temperature changes were significantly affected by an interaction of the bleach and light variables. The application of lights significantly improved the whitening efficacy of some bleach materials, but it caused significant temperature increases in the outer and inner tooth surfaces. The IR and CO2 laser lights caused the highest tooth temperature increases. Dentists performing an in-office bleaching technique with the use of an additional light source to accelerate tooth whitening should consider the specific bleaching agent being used, as well as the potential risks of heating teeth. A specific combination of bleach and light that demonstrates good color change and little temperature rise should be selected for in-office tooth bleaching.

Advances and perspectives in tooth tissue engineering.

Science.gov (United States)

Monteiro, Nelson; Yelick, Pamela C

2017-09-01

Bio-engineered teeth that can grow and remodel in a manner similar to that of natural teeth have the potential to serve as permanent replacements to the currently used prosthetic teeth, such as dental implants. A major challenge in designing functional bio-engineered teeth is to mimic both the structural and anisotropic mechanical characteristics of the native tooth. Therefore, the field of dental and whole tooth regeneration has advanced towards the molecular and nanoscale design of bio-active, biomimetic systems, using biomaterials, drug delivery systems and stem cells. The focus of this review is to discuss recent advances in tooth tissue engineering, using biomimetic scaffolds that provide proper architectural cues, exhibit the capacity to support dental stem cell proliferation and differentiation and sequester and release bio-active agents, such as growth factors and nucleic acids, in a spatiotemporal controlled manner. Although many in vitro and in vivo studies on tooth regeneration appear promising, before tooth tissue engineering becomes a reality for humans, additional research is needed to perfect methods that use adult human dental stem cells, as opposed to embryonic dental stem cells, and to devise the means to generate bio-engineered teeth of predetermined size and shape. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Fused primary first mandibular macromolar with a unique relation to its permanent successors: A rare tooth anomaly.

Science.gov (United States)

Dhindsa, Abhishek; Garg, Shalini; Damle, S G; Opal, Shireen; Singh, Tavleen

2013-04-01

Dental anomalies of number and forms may occur in the primary and permanent dentition. Various terms have been used to describe dental twinning anomalies: Germination, fusion, concrescence, double teeth, conjoined teeth, twinned teeth, geminifusion, and vicinifusion. Fused tooth is a developmental anomaly that is seen more frequently in the primary than the permanent dentition. Double tooth involving deciduous anterior teeth is found mostly in the mandible. Very few cases of nonsyndromic double primary molar have been reported in the literature. The succeeding permanent tooth is often found missing congenitally in the same region. This article reports a very rare unilateral occurrence of an anomalous, primary mandibular first macromolar formed by fusion with a dysmorphic premolar like supernumerary tooth in deciduous dentition period. Instead of agenesis of succedaneous tooth, the double tooth has been succeeded by normally developing mandibular first premolar in the same region.

Prosthetic clone and natural human tooth comparison by speckle interferometry

Science.gov (United States)

Slangen, Pierre; Corn, Stephane; Fages, Michel; Raynal, Jacques; Cuisinier, Frederic J. G.

2010-09-01

New trends in dental prosthodontic interventions tend to preserve the maximum of "body" structure. With the evolution of CAD-CAM techniques, it is now possible to measure "in mouth" the remaining dental tissues. The prosthetic crown is then designed using this shape on which it will be glued on, and also by taking into account the contact surface of the opposite jaw tooth. Several theories discuss on the glue thickness and formulation, but also on the way to evolve to a more biocompatible crown and also new biomechanical concepts. In order to validate these new concepts and materials, and to study the mechanical properties and mechanical integrity of the prosthesis, high resolution optical measurements of the deformations of the glue and the crown are needed. Samples are two intact premolars extracted for orthodontics reasons. The reference sample has no modifications on the tooth while the second sample tooth is shaped to receive a feldspathic ceramic monoblock crown which will be glued. This crown was manufactured with a chairside CAD-CAM system from an intra-oral optical print. The software allows to realize a nearly perfect clone of the reference sample. The necessary space for the glue is also entered with ideal values. This duplication process yields to obtain two samples with identical anatomy for further processing. The glue joint thickness can also be modified if required. The purpose is to compare the behaviour of a natural tooth and its prosthetic clone manufactured with "biomechanical" concepts. Vertical cut samples have been used to deal with planar object observation, and also to look "inside" the tooth. We have developed a complete apparatus enabling the study of the compressive mechanical behaviour of the concerned tooth by speckle interferometry. Because in plane displacements are of great interest for orthodontic measurements1, an optical fiber in-plane sensitive interferometer has been designed. The fibers are wrapped around piezoelectric

The influence of different fitting functions on paleodose determination in ESR dating of tooth enamel-Taking Longgupo tooth fossils as an example

International Nuclear Information System (INIS)

Han Fei; Yin Gongming; Liu Chunru; Gao Lu; Li Jianping; Jean-Jacques Bahain; Tristan Garcia

2011-01-01

Paleodose determination is essential for ESR dating,and the D E value is influenced by the mathematical functions used for dose response data points fitting. At present, single saturation exponential (SSE) fitting is commonly used for ESR dating. It is valid when the number of trap sites is constant, but when the increasing irradiation dose induces new traps, the dose response curve will not follow a unique SSE function. In this study,in addition to SSE, the double saturation exponential (DSE) and exponential plus linear(EPL) functions were used to fit the ESR data of eight tooth fossil samples from Longgupo early Pleistocene site in Wushan, Chongqing.The results show that the D E values calculated by SSE fitting function are systematically higher than DSE and EPL, and the residual sum of square of SSE is larger than the other two. Compared with known reference dose value, we found that DSE has the smallest relative deviation among the three functions, and the SSE has the largest deviation. The study indicates that the SSE function overestimates D E value of tooth fossil samples from old sites, while the D E value determined by DSE functions seems closer to the true value of paleodose. (authors)

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Innovative Design and Performance Evaluation of Bionic Imprinting Toothed Wheel.

Science.gov (United States)

Zhang, Zhihong; Wang, Xiaoyang; Tong, Jin; Stephen, Carr

2018-01-01

A highly efficient soil-burrowing dung beetle possesses an intricate outer contour curve on its foreleg end-tooth. This study was carried out based on evidence that this special outer contour curve has the potential of reducing soil penetration resistance and could enhance soil-burrowing efficiency. A toothed wheel is a typical agricultural implement for soil imprinting, to increase its working efficiency; the approach of the bionic geometrical structure was utilized to optimize the innovative shape of imprinting toothed wheel. Characteristics in the dung beetle's foreleg end-tooth were extracted and studied by the edge detection technique. Then, this special outer contour curve was modeled by a nine-order polynomial function and used for the innovative design of imprinting the tooth's cutting edge. Both the conventional and bionic teeth were manufactured, and traction tests in a soil bin were conducted. Taking required draft force and volume of imprinted microbasin as the evaluating indexes, operating efficiency and quality of different toothed wheels were compared and investigated. Results indicate that compared with the conventional toothed wheel, a bionic toothed wheel possesses a better forward resistance reduction property against soil and, meanwhile, can enhance the quality of soil imprinting by increasing the volume of the created micro-basin.

Family income and tooth decay in US children: does the association change with age?

Science.gov (United States)

Bernabé, E; Delgado-Angulo, E K; Murasko, J E; Marcenes, W

2012-01-01

This study explored whether the association of family income with tooth decay changes with age among children in the United States. A second objective was to explore the role of access to dental health care services in explaining the interrelationships between family income, child age and tooth decay. Data from 7,491 2- to 15-year-old children who participated in the 1999-2004 National and Health and Nutrition Examination Survey were analyzed. The association of family income with the prevalence of tooth decay in primary, permanent and primary or permanent teeth was first estimated in logistic regression models with all children, and then, separately in four age groups that reflect the development of the dentition (2-5, 6-8, 9-11 and 12-15 years, respectively). Findings showed that the income gradient in tooth decay attenuated significantly in 9- to 11-year-olds only to re-emerge in 12- to 15-year-olds. The age profile of the income gradient in tooth decay was not accounted for by a diverse set of family and child characteristics. This is the first study providing some evidence for age variations in the income gradient in tooth decay among children in the United States. Copyright © 2012 S. Karger AG, Basel.

Tooth brushing among 11- to 15-year-olds in Denmark

DEFF Research Database (Denmark)

Bast, L. S.; Holstein, B. E.; Nordahl, Helene

2015-01-01

brushing. Results: 10,607 respondents: a response rate of 88.3%. Boys of lower social class had higher odds ratio (OR) of infrequent tooth brushing than girls: 1.98 (95% confidence interval 1.62-2.41) vs 1.80 (1.53-2.24). Immigrants and descendants had higher odds compared to adolescents of Danish origin......Objective: Regular tooth brushing in adolescence predicts stable tooth brushing habits later in life. Differences in tooth brushing habits by ethnic background and socioeconomic position have been suggested. We investigated migration status and social class in relation to infrequent tooth brushing...... both separately and combined. Methods: The study population was 11-15 year-olds chosen from a clustered random sample of schools. Univariate and multivariate logistic regression analyses estimated the separate and combined effects of migration status and social class on less than twice daily tooth...

In utero and lactational exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) affects tooth development in rhesus monkeys

Energy Technology Data Exchange (ETDEWEB)

Yasuda, Iku; Kazuhiro, Tsuga; Yasumasa, Akagawa [Hiroshima Univ. (Japan); Mineo, Yasuda; Hiroshi, Sumida [Hiroshima International Univ. (Japan); Akihiro, Arima; Toshio, Ihara [Shin Nippon Biomedical Laboratories, Ltd., Kagoshima (Japan); Shunichiro, Kubota [Tokyo Univ. (Japan); Kazuo, Asaoka [Kyoto Univ., Inuyama (Japan). Primate Research Institute; Takumi, Takasuga [Shimadzu Techno-Research Inc., Kyoto (Japan)

2004-09-15

The current tolerable daily intake (TDI) of dioxin and dioxin related compounds has been set at 4 pg TEQ/kg/day in Japan. This value was calculated from the lowest-observed-adverse-effect level (LOAEL) in experimental animals, mostly rodents. Gray et al. reported that a single oral dose of 200 ng/kg of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to pregnant rats on day 15 of gestation resulted in abnormalities of reproductive organs in the offspring. The maternal body burden at this dose was measured to be 86 ng/kg. To attain this body burden level, human daily intake was calculated to be 43.6 pg/kg/day. An uncertainty factor of 10 was applied to this value, and the human TDI was established. However, due to great differences in the biological half life of TCDD between human and rodents, the validity of this calculation is questioned. To obtain more reliable LOAEL in the second generation, we initiated a long-term study in rhesus monkeys in 1999. In rodents, teeth are known to be targets of developmental toxicity of dioxin. In utero and lactational TCDD exposure affects rat incisor and molar development. In humans also tooth abnormalities were reported among populations exposed to dioxins. In our monkey experiment, some young were stillborn or died neonatally. These animals provided us with a unique opportunity to study tooth development in primate young exposed to TCDD in utero and lactationally. By macroscopic observation we found some tooth abnormalities among died young exposed to TCDD5. This prompted us to examine surviving young by radiography. This is an interim report of our findings in these young.

Tooth color: effects on judgments of attractiveness and age.

Science.gov (United States)

Grosofsky, Alexis; Adkins, Sarah; Bastholm, Robert; Meyer, Leif; Krueger, Lisa; Meyer, Joshua; Torma, Peter

2003-02-01

Tooth whitening has become a very popular procedure. Advertisements for whitening products imply that whiter teeth are more attractive than yellower teeth. We tested this idea empirically by manipulating the tooth color of pictures of male and female targets. Participants' ratings of attractiveness were not influenced by tooth color. Exp. 2 yielded a negative correlation between attractiveness and age ratings: targets judged to be older were rated as less attractive. Unless whiter teeth help in some other way, e.g., improved self-esteem or confidence, it seems that tooth whitening procedures or products are not associated with increased attractiveness to others.

Side effects of external tooth bleaching

DEFF Research Database (Denmark)

Bruzell, E.M.; Pallesen, Ulla; Thoresen, N.R.

2013-01-01

Objective The study was performed to assess the risk of at-home and in-office bleaching procedures, and to recognise potential predictors for side effects. Design Multi-centre, questionnaire-based prospective study with follow-ups at around 14 days and around one year post-treatment. Setting...... General practices and university clinics during the years 2007‑2009 in Scandinavia. Subjects Patients with tooth bleaching as part of the treatment plan. Results The prevalence of experienced tooth sensitivity at first follow-up was independent of bleaching procedure (at-home = 50.3% [n = 143]; in...... attributed to the bleaching treatment in the at-home and in-office groups, respectively. Predictors for side effects were tooth sensitivity, surface loss and gingivitis when observed at inclusion. Treatment-related predictors were bleaching concentration and contact between tray and gingiva. Conclusions...

Cross Sectional: bilateral parent-child interactions in school-age children's tooth-brushing behaviors.

Science.gov (United States)

Goh, Esther C L; Hsu, Stephen Chin-Ying

2013-01-01

The purpose of this study was to examine bilateral dynamics between parents and children in influencing children's tooth-brushing behaviors. In-depth conversational interviews-a specific qualitative method-were conducted with 38 parents in urban Xiamen, China and Singapore to learn insights into parental strategies for encouraging tooth-brushing habits in 6- to 9-year-old children. The interviews also examined the range of responses from children toward these parental strategies. Children usually do not comply with these tooth-brushing instructions from parents without a process of negotiation. Children's responses ranged from active resistant to compliant. Parents in Xiamen tended to use softer strategies and were more prone to be emotionally and behaviorally influenced by children's effort to thwart these strategies. Conversely, Singapore parents tended to demonstrate greater tenacity in negotiating with children. The process of developing children's tooth-brushing habits is not a unilateral from-parent-to-children process. Instead, it should be conceptualized as an ongoing interaction with bilateral power of influence from both parties.

Clinical evaluation of a newly designed orthodontic tooth brush - A clinical study

Directory of Open Access Journals (Sweden)

C S Saimbi

2009-01-01

In this study, the newly designed orthodontic tooth brush is compared with an ordinary tooth brush. Results of this study show that the newly designed orthodontic tooth brush is superior in its cleaning efficiency as compared to the ordinary tooth brush. The results show that plaque removing capacity of orthodontic tooth brush is nearly 95-99%.

Development of dental charts according to tooth development and eruption for Turkish children and young adults

International Nuclear Information System (INIS)

Karadayl, Beytullah; Ozaslan, Abdi; Afsin, Hueseyin; Karadayi, Suekriye

2014-01-01

In this study, we aimed to develop dental charts for Turkish children and young adults of both genders within the age group of 4.5-22.5 years according to tooth mineralization and eruption in a format similar to that proposed by AlQahtani et al. In total, 753 digital panoramic radiographs from 350 males and 403 females were assessed. The permanent teeth were evaluated according to the classification system described by Demirjian et al. The eruption stage was assessed with Bengston's system, which was modified by AlQahtani et al at four points. Teeth generally developed earlier in females than in males. This was particularly notable in the age group of 5-14 years. However, this difference was usually visible in only one stage, not in all teeth. It has been determined that the mixed dentition period ended with the shedding of the second deciduous molars in both genders. The dental charts presented here included information that could be beneficial to dental clinicians in making appropriate diagnosis and planning orthodontic and surgical procedures. These charts also provided datasets for preliminary dental age estimation in Turkish children and young adults.

Development of dental charts according to tooth development and eruption for Turkish children and young adults

Energy Technology Data Exchange (ETDEWEB)

Karadayl, Beytullah; Ozaslan, Abdi [University of Istanbul, Cerrahpasa Faculty of Medicine, Forensic Medicine Department, Istanbul (Turkey); Afsin, Hueseyin [University of Istanbul, Cerrahpasa Faculty of Medicine, Forensic Medicine Department, Istanbul (Turkey); Karadayi, Suekriye [Public Health Agency, Istanbul (Turkey)

2014-06-15

In this study, we aimed to develop dental charts for Turkish children and young adults of both genders within the age group of 4.5-22.5 years according to tooth mineralization and eruption in a format similar to that proposed by AlQahtani et al. In total, 753 digital panoramic radiographs from 350 males and 403 females were assessed. The permanent teeth were evaluated according to the classification system described by Demirjian et al. The eruption stage was assessed with Bengston's system, which was modified by AlQahtani et al at four points. Teeth generally developed earlier in females than in males. This was particularly notable in the age group of 5-14 years. However, this difference was usually visible in only one stage, not in all teeth. It has been determined that the mixed dentition period ended with the shedding of the second deciduous molars in both genders. The dental charts presented here included information that could be beneficial to dental clinicians in making appropriate diagnosis and planning orthodontic and surgical procedures. These charts also provided datasets for preliminary dental age estimation in Turkish children and young adults.

Power Consumption Optimization in Tooth Gears Processing

Science.gov (United States)

Kanatnikov, N.; Harlamov, G.; Kanatnikova, P.; Pashmentova, A.

2018-01-01

The paper reviews the issue of optimization of technological process of tooth gears production of the power consumption criteria. The authors dwell on the indices used for cutting process estimation by the consumed energy criteria and their applicability in the analysis of the toothed wheel production process. The inventors proposed a method for optimization of power consumptions based on the spatial modeling of cutting pattern. The article is aimed at solving the problem of effective source management in order to achieve economical and ecological effect during the mechanical processing of toothed gears. The research was supported by Russian Science Foundation (project No. 17-79-10316).

Addressing Tooth Decay in Head Start Children

Science.gov (United States)

Knowlden, Adam P.; Hill, Lawrence F.; Alles-White, Monica L.; Cottrell, Randall R.

2012-01-01

Tooth decay is the most prevalent chronic disease of childhood. Oral health education and dental services are crucial to reducing the number of children afflicted with dental cavities. Due to limited access to preventative care, Head Start children are particularly vulnerable to tooth decay. This article outlines practical implications of a…

Relationship between natural tooth shade and skin colour.

Science.gov (United States)

Nourbakhsh, M; Mousavinejad, N; Adli, A R; Harati, M

2013-06-01

The purpose of this study was to assess the correlation of skin colour and tooth shade. One hundred and twenty six individuals aging between 18 to 25 years participated in this study. Colour of the maxillary central incisors was examined by VITA easy shade. Tooth shades were assigned to four ordinal values. Nivea Beauty Protect Foundation shade sample was used as a guide to assess facial skin colour Shin colours were also assigned to four ordinal values. Spearman test revealed that there was a significant relationship between tooth shade and skin colour Total co-relation factor was 51.6% (p men (p <0 .01). The highest tooth shade prevalence belonged to the second group and the highest skin colour prevalence was also in the second skin colour group.

New laboratory methods to study tooth surface coverage and interproximal plaque control by dentifrice products.

Science.gov (United States)

Xu, Tao; Herles, Susan M; Barnes, Virginia M

2004-01-01

To develop and test an in vitro tooth model for use in conjunction with laboratory methods to study interproximal effects and efficacy of dentifrices. The application of the model should offer visual evaluation of dentifrice coverage of the tooth surface, and measure dental plaque control at posterior interdental spaces with a dentifrice. The dentifrice products tested with the model were: Colgate Total 2 in 1 Toothpaste and Mouthwash (CTTM), Colgate Total dentifrice (CTD), and Colgate Regular dentifrice (CRD). Extracted human posterior teeth were disinfected, cleaned, aligned, and mounted in denture acrylic. In the area coverage method, tooth surface coverage and penetration of two different forms of dentifrice products (CTTM and CRD) were compared using digital photography. In the interproximal plaque control method, the teeth were coated with human saliva and incubated anaerobically with a mixture of representative oral bacteria for six hours at 37 degrees C. In vitro dental plaque was assessed after brushing the facial surface with one of the three dentifrice products using a clinical plaque scoring index. The area coverage method demonstrated that both dentifrice products tested covered approximately 70% of the facial tooth surface; the CTTM dentifrice coverage on the lingual tooth surface was significantly higher than the coverage for the CRD dentifrice. With the interproximal plaque control method, in the presence of an active ingredient, the CTTM dentifrice had equivalent efficacy to the CTD dentifrice. Both CTTM and CTD were significantly superior to the CRD for interproximal dental plaque control. Using the developed tooth model, two assessment methods have been shown to have the potential to demonstrate tooth surface coverage, and to assess the potential efficacy of a dentifrice for the control of interproximal dental plaque. This process can indicate potential clinical evaluation of an oral care product, and support clinical findings with controlled

Inequality in oral health related to early and later life social conditions: a study of elderly in Norway and Sweden.

Science.gov (United States)

Gülcan, Ferda; Ekbäck, Gunnar; Ordell, Sven; Lie, Stein Atle; Åstrøm, Anne Nordrehaug

2015-02-10

A life course perspective recognizes influences of socially patterned exposures on oral health across the life span. This study assessed the influence of early and later life social conditions on tooth loss and oral impacts on daily performances (OIDP) of people aged 65 and 70 years. Whether social inequalities in oral health changed after the usual age of retirement was also examined. In accordance with "the latent effect life course model", it was hypothesized that adverse early-life social conditions increase the risk of subsequent tooth loss and impaired OIDP, independent of later-life social conditions. Data were obtained from two cohorts studies conducted in Sweden and Norway. The 2007 and 2012 waves of the surveys were used for the present study. Early-life social conditions were measured in terms of gender, education and country of birth, and later-life social conditions were assessed by working status, marital status and size of social network. Logistic regression and Generalized Estimating Equations (GEE) were used to analyse the data. Inverse probability weighting (IPW) was used to adjust estimates for missing responses and loss to follow-up. Early-life social conditions contributed to tooth loss and OIDP in each survey year and both countries independent of later-life social conditions. Lower education correlated positively with tooth loss, but did not influence OIDP. Foreign country of birth correlated positively with oral impacts in Sweden only. Later-life social conditions were the strongest predictors of tooth loss and OIDP across survey years and countries. GEE revealed significant interactions between social network and survey year, and between marital status and survey year on tooth loss. The results confirmed the latent effect life course model in that early and later life social conditions had independent effects on tooth loss and OIDP among the elderly in Norway and Sweden. Between age 65 and 70, inequalities in tooth loss related to marital

Power loss analysis in altered tooth-sum spur gearing

Directory of Open Access Journals (Sweden)

Sachidananda H. K.

2018-01-01

Full Text Available The main cause of power loss or dissipation of heat in case of meshed gears is due to friction existing between gear tooth mesh and is a major concern in low rotational speed gears, whereas in case of high operating speed the power loss taking place due to compression of air-lubricant mixture (churning losses and windage losses due to aerodynamic trial of air lubricant mixture which controls the total efficiency needs to be considered. Therefore, in order to improve mechanical efficiency it is necessary for gear designer during gear tooth optimization to consider these energy losses. In this research paper the power loss analysis for a tooth-sum of 100 altered by ±4% operating between a specified center distance is considered. The results show that negative altered tooth-sum gearing performs better as compared to standard and positive altered tooth-sum gearing.

A comparison of tooth structure in Neanderthals and early Homo sapiens sapiens: a radiographic study.

OpenAIRE

Zilberman, U; Smith, P

1992-01-01

Tooth components of 1st and 2nd erupted permanent molars were measured from standardised radiographs of Homo sapiens sapiens and Homo sapiens neanderthalensis. Enamel height was greater in Homo sapiens sapiens but pulp height and width and the height of the enamel to floor of the pulp chamber were greater in Homo sapiens neanderthalensis. Dentine height, crown width and enamel width showed similar results in the two groups. Unerupted first molars were measured to analyse the influence of func...

DNA Methylation: A Frontier in Tooth Organogenesis and Developmental Dental Defects.

Science.gov (United States)

Wan, Mian; Li, Hongyu; Zhou, Yachuan; Du, Wei; Xu, Xin; Ye, Ling; Zhou, Xuedong; Zheng, Liwei

2018-01-01

Tooth development relies on interactions between epithelial and mesenchymal tissues, which are controlled by sophisticated networks of conserved signaling. The signaling networks regulating odontogenesis have been well characterized, but the epigenetic mechanisms underlying remain to be elucidated. In this review, we describe current researches regarding the control of various genes expression by DNA methylation during odontogenesis, summarize genomic mapping of DNA methylation in various stages of tooth formation and diverse dental tissues by high-throughput approaches, and highlight the roles of DNA methylation in odontogenesis. Researches on mammals have revealed that the genomic methylation, which occurs on cytosine residues, regulates certain genes transcription. Consequently, DNA methylation plays a crucial role in spatiotemporal organization of signaling pathways, and is essential for organogenesis. Recently, mounting evidence proves that methylation of genomes contributes to the spatiotemporal gene dynamics during odontogenesis. With emerging new technologies of mapping cytosine modifications in global genome, investigators are seeking an overall view of DNA methylome dynamics that characterize genetic information to manifest across incredibly varied tooth development stages, dental tissues, and developmental dental defects. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bracket adhesive resin and tooth conditioner. 872... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3750 Bracket adhesive resin and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device...

Angulation change of the third molar tooth in orthodontic treatment

Directory of Open Access Journals (Sweden)

Ardiansyah S. Pawinru

2017-04-01

Full Text Available Objective : Impaction of the third molar tooth mandibular is often found in patients with orthodontic treatment. In orthodontic treatment, extraction cases of impaction of the third molar tooth are usually performed, but the patients often refuse this extraction. Extraction of premolar has a good effect on the third molar mandibular angulation during treatment. Material and Methods : This study is a retrospective clinical study with descriptive analytic to find out the effect of the first mandibular premolar tooth extraction to angulation change of the third molar mandibular in orthodontic treatment with a standard edgewise method. Angulation change was performed by comparing the third molar mandibular angulation before and after orthodontic treatment with panoramic radiographs. Angulation of the third molar tooth mandibular was calculated from the angle formed between the long axis of the tooth with the reference line infraorbita. Results : The sample comprised 60 of impacted mandibular third molar region of the left and right regions of 30 patients who had been treated declared cured in clinic of orthodontic specialist of Dentistry Faculty Padjadjaran University. The sample was divided into three (3 groups of patients before treatment angulation of the third molar tooth mandibular under 300, 300 to 600 and above 60o, then measured change of angulation and observed whether it increased, fixed or decreased. Results were analyzed by T- test and Wilcoxon test showed that there was a significant change in angulation of the third molar mandibular in orthodontic treatment with the first premolar tooth mandibular extraction. Conclusion : This study is that the first premolar tooth mandibular extraction affects the angulation of the third molar tooth mandibular after orthodontic treatment.

Chapter 1: An Introduction to the Saber-Tooth Project.

Science.gov (United States)

Ward, Phillip

1999-01-01

Introduces a theme issue on the Saber-Tooth Project, an ongoing reform effort involving a university and school district that collaborate to improve middle school physical education by improving teaching conditions and engaging teachers in professional development emphasizing curriculum improvement. The monograph explains the nature of…

PHOTOGRAMMETRY-BASED AUTOMATED MEASUREMENTS FOR TOOTH SHAPE AND OCCLUSION ANALYSIS

Directory of Open Access Journals (Sweden)

V. A. Knyaz

2016-06-01

Full Text Available Tooth measurements (odontometry are performed for various scientific and practical applications, including dentistry. Present-day techniques are being increasingly based on 3D model use that provides wider prospects in comparison to measurements on real objects: teeth or their plaster copies. The main advantages emerge through application of new measurement methods which provide the needed degree of non-invasiveness, precision, convenience and details. Tooth measurements have been always regarded as a time-consuming research, even more so with use of new methods due to their wider opportunities. This is where automation becomes essential for further development and implication of measurement techniques. In our research automation in obtaining 3D models and automation of measurements provided essential data that was analysed to suggest recommendations for tooth preparation – one of the most responsible clinical procedures in prosthetic dentistry – within a comparatively short period of time. The original photogrammetric 3D reconstruction system allows to generate 3D models of dental arches, reproduce their closure, or occlusion, and to perform a set of standard measurement in automated mode.

Photogrammetry-Based Automated Measurements for Tooth Shape and Occlusion Analysis

Science.gov (United States)

Knyaz, V. A.; Gaboutchian, A. V.

2016-06-01

Tooth measurements (odontometry) are performed for various scientific and practical applications, including dentistry. Present-day techniques are being increasingly based on 3D model use that provides wider prospects in comparison to measurements on real objects: teeth or their plaster copies. The main advantages emerge through application of new measurement methods which provide the needed degree of non-invasiveness, precision, convenience and details. Tooth measurements have been always regarded as a time-consuming research, even more so with use of new methods due to their wider opportunities. This is where automation becomes essential for further development and implication of measurement techniques. In our research automation in obtaining 3D models and automation of measurements provided essential data that was analysed to suggest recommendations for tooth preparation - one of the most responsible clinical procedures in prosthetic dentistry - within a comparatively short period of time. The original photogrammetric 3D reconstruction system allows to generate 3D models of dental arches, reproduce their closure, or occlusion, and to perform a set of standard measurement in automated mode.

Orthodontic Tooth Movement with Clear Aligners

OpenAIRE

Drake, Carl T.; McGorray, Susan P.; Dolce, Calogero; Nair, Madhu; Wheeler, Timothy T.

2012-01-01

Clear aligners provide a convenient model to measure orthodontic tooth movement (OTM). We examined the role of in vivo aligner material fatigue and subject-specific factors in tooth movement. Fifteen subjects seeking orthodontic treatment at the University of Florida were enrolled. Results were compared with data previously collected from 37 subjects enrolled in a similar protocol. Subjects were followed prospectively for eight weeks. An upper central incisor was programmed to move 0.5 mm. ev...

Assessment of Tooth Wear Among Glass Factory Workers: WHO 2013 Oral Health Survey.

Science.gov (United States)

Chaturvedi, Pulkit; Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Bapat, Salil; Gupta, Vivek Vardhan

2015-08-01

Glass factory workers are often exposed to the hazardous environment that leads to deleterious oral health and subsequently, general health. We planned to determine the effects of the particulates present in the milieu on the tooth wear among workers. To assess tooth wear among glass factory workers in Jaipur, Rajasthan, India. A descriptive cross-sectional survey was conducted among 936 glass workers in Jaipur, Rajasthan, India from January-June 2014. A survey proforma was designed for tooth wear evaluation with the help of WHO Oral Health Assessment form 2013 (for adults). Information regarding oral health practices, adverse habits and dietary habits, demographic details was gathered and clinical parameters were recorded. The Chi-square test, t-test, One-way Analysis of Variance and a Stepwise multiple linear regression analysis. The most prevalent form of erosion was enamel erosion (589, 62.93%) with few subjects of deeper dentinal erosion and the difference was statistically significant (p=0.001). Dental erosion was found to be higher among males compared to females. Years of experience and educational status were identified as best predictors for dental erosion. It was concluded that there was considerable evidence of dental erosion found among the factory workers. Due to ignorance on social, cultural and health aspects, professional approach with regular dental care services for detection of early symptoms and planning of preventive strategies is warranted.

The single-tooth implant treatment of congenitally missing maxillary lateral incisors using angled abutments: A clinical report

Directory of Open Access Journals (Sweden)

Suleyman Hakan Tuna

2009-01-01

Full Text Available The maxillary lateral incisor is the second most common congenitally absent tooth. There are several treatment options for replacing the missing maxillary lateral incisor, including canine substitution, tooth-supported restoration, or single-tooth implant. Dental implants are an appropriate treatment option for replacing missing maxillary lateral incisor teeth in adolescents when their dental and skeletal development is complete. This case report presents the treatment of a patient with congenitally missing maxillary lateral incisors using dental implants with angled abutments.

The regulation of tooth morphogenesis is associated with epithelial cell proliferation and the expression of Sonic hedgehog through epithelial-mesenchymal interactions

International Nuclear Information System (INIS)

Ishida, Kentaro; Murofushi, Mayumi; Nakao, Kazuhisa; Morita, Ritsuko; Ogawa, Miho; Tsuji, Takashi

2011-01-01

Research highlights: → Bioengineered teeth regulated the contact area of epithelium and mesenchyme. → The crown width is regulated by the contact area of the epithelium and mesenchyme. → This regulation is associated with cell proliferation and Sonic hedgehog expression. → The cusp number is correlated with the crown width of the bioengineered tooth. → Cell proliferation and Shh expression areas regulate the tooth morphogenesis. -- Abstract: Ectodermal organs, such as the tooth, salivary gland, hair, and mammary gland, develop through reciprocal epithelial-mesenchymal interactions. Tooth morphologies are defined by the crown width and tooth length (macro-morphologies), and by the number and locations of the cusp and roots (micro-morphologies). In our current study, we report that the crown width of a bioengineered molar tooth, which was reconstructed using dissociated epithelial and mesenchymal cells via an organ germ method, can be regulated by the contact area between epithelial and mesenchymal cell layers. We further show that this is associated with cell proliferation and Sonic hedgehog (Shh) expression in the inner enamel epithelium after the germ stage has formed a secondary enamel knot. We also demonstrate that the cusp number is significantly correlated with the crown width of the bioengineered tooth. These findings suggest that the tooth micro-morphology, i.e. the cusp formation, is regulated after the tooth width, or macro-morphology, is determined. These findings also suggest that the spatiotemporal patterning of cell proliferation and the Shh expression areas in the epithelium regulate the crown width and cusp formation of the developing tooth.

Early Regression of the Dental Lamina Underlies the Development of Diphyodont Dentitions

Czech Academy of Sciences Publication Activity Database

Buchtová, Marcela; Štembírek, J.; Glocová, K.; Matalová, Eva; Tucker, A.S.

2012-01-01

Roč. 91, č. 5 (2012), s. 491-498 ISSN 0022-0345 R&D Projects: GA AV ČR KJB601110910 Institutional research plan: CEZ:AV0Z50450515 Keywords : developmental biology * dental morphology * tooth development Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.826, year: 2012

Tooth preparations for complete crowns: an art form based on scientific principles.

Science.gov (United States)

Goodacre, C J; Campagni, W V; Aquilino, S A

2001-04-01

No recent literature has reviewed the current scientific knowledge on complete coverage tooth preparations. This article traces the historic evolution of complete coverage tooth preparations and identifies guidelines for scientific tooth preparations. Literature covering 250 years of clinical practice was reviewed with emphasis on scientific data acquired during the last 50 years. Both a MEDLINE search and an extensive manual search were used to locate relevant articles written in English in the last 50 years. Teeth should be prepared so that they exhibit the following characteristics: 10 to 20 degrees of total occlusal convergence, a minimal occlusocervical dimension of 4 mm for molars and 3 mm for other teeth, and an occlusocervical-to-faciolingual dimension ratio of 0.4 or greater. Facioproximal and linguoproximal line angles should be preserved whenever possible. When the above features are missing, the teeth should be modified with auxiliary resistance features such as axial grooves or boxes, preferably on proximal surfaces. Finish line selection should be based on the type of crown/retainer, esthetic requirements, ease of formation, and personal experience. Expectations of enhanced marginal fit with certain finish lines could not be validated by recent research. Esthetic requirements and tooth conditions determine finish line locations relative to the gingiva, with a supragingival location being more acceptable. Line angles should be rounded, and a reasonable degree of surface smoothness is desired. Nine scientific principles have been developed that ensure mechanical, biologic, and esthetic success for tooth preparation of complete coverage restorations.

Replacing a Missing Tooth

Science.gov (United States)

... lateral incisor. This may be accomplished by adding plastic or porcelain filling material or a porcelain crown ... This type of bridge requires much less tooth reduction of adjacent teeth, and there is no danger ...

[Esthetic analysis on immediate single-tooth implant restoration in anterior maxilla].

Science.gov (United States)

Li, Shao-wei; Wang, Guo-shi; Sha, Yan-zhi

2015-10-01

To evaluate the esthetic outcomes of immediate single-tooth implant restoration in anterior maxilla with the pink esthetic score (PES). Nine patients were treated with 9 Straumann implants by immediate single-tooth implant restoration in anterior maxilla. Assessment of PES after crown placement at 1 week (baseline) and 6 months after implantation was conducted. Statistical analysis was performed using SPSS 16.0 software package. Nine implants achieved a retention rate of 100%. PES for single-tooth implant was 10.33 ± 1.50 at 1 week and 11.44 ± 0.88 at 6 months after crown placement. The difference was significant(P=0.021). This study indicates that immediate single-tooth implant restoration in anterior maxilla is predictable. Immediate single-tooth implantation can result in good clinical esthetic results in most patients with single-tooth missing in anterior maxilla.

Esthetic enhancement of a traumatized anterior tooth with a combination of forced eruption and tooth alignment: a case report

Science.gov (United States)

Kang, So-Hee; Jin, Myoung-Uk; Kim, Sung-Kyo

2016-01-01

Exposing sound structure of a subgingivally fractured tooth using orthodontic extrusion is considered to be a conservative way to re-establish biologic width without sacrificing esthetics or jeopardizing periodontal support of neighboring teeth. When a misaligned tooth is traumatically involved, a more comprehensive approach combining tooth extrusion and re-alignment may be necessary for a successful restorative outcome. This case report describes a successful esthetic management of a patient with complicated crown-root fracture on the maxillary right central incisor and pre-existing malocclusion in the maxillary anterior region. Forced eruption along with re-alignment of teeth by orthodontic movement seems to allow re-positioning of the fracture line to a favorable position and correction of crowding, providing a better esthetic result. PMID:27508163

ISS protocol for EPR tooth dosimetry

International Nuclear Information System (INIS)

Onori, S.; Aragno, D.; Fattibene, P.; Petetti, E.; Pressello, M.C.

2000-01-01

The accuracy in Electron Paramagnetic Resonance (EPR) dose reconstruction with tooth enamel is affected by sample preparation, dosimetric signal amplitude evaluation and unknown dose estimate. Worldwide efforts in the field of EPR dose reconstruction with tooth enamel are focused on the optimization of the three mentioned steps in dose assessment. In the present work, the protocol implemented at ISS in the framework of the European Community Nuclear Fission Safety project 'Dose Reconstruction' is presented. A combined mechanical-chemical procedure for ground enamel sample preparation is used. The signal intensity evaluation is carried out with powder spectra simulation program. Finally, the unknown dose is evaluated individually for each sample with the additive dose method. The unknown dose is obtained by subtracting a mean native dose from the back-extrapolated dose. As an example of the capability of the ISS protocol in unknown dose evaluation, the results obtained in the framework of the 2nd International Intercomparison on EPR tooth enamel dosimetry are reported

Clinical, radiographic, and histological observation of a human immature permanent tooth with chronic apical abscess after revitalization treatment.

Science.gov (United States)

Shimizu, Emi; Ricucci, Domenico; Albert, Jeffrey; Alobaid, Adel S; Gibbs, Jennifer L; Huang, George T-J; Lin, Louis M

2013-08-01

Revitalization procedures have been widely used for the treatment of immature permanent teeth with apical periodontitis. The treatment procedures appear to be capable of encouraging continued root development and thickening of the canal walls. The nature of tissues formed in the canal space and at the root apex after revitalization has been shown histologically in several animal studies; similar studies in humans were recently reported. A 9-year-old boy had a traumatic injury to his upper anterior teeth. Tooth #9 suffered a complicated crown fracture with a pulp exposure, which was restored with a composite resin. The tooth developed a chronic apical abscess. Revitalization procedures were performed on tooth #9 because it was an immature permanent tooth with an open apex and thin canal walls. Twenty-six months after revitalization, the tooth had a horizontal crown fracture at the cervical level and could not be restored. The tooth was extracted and processed for routine histological and immunohistochemical examination to identify the nature of tissues formed in the canal space. Clinically and radiographically, the revitalization of the present case was successful because of the absence of signs and symptoms and the resolution of periapical lesion as well as thickening of the canal walls and continued root development. The tissue formed in the canal was well-mineralized cementum- or bone-like tissue identified by routine histology and immunohistochemistry. No pulp-like tissue characterized by the presence of polarized odontoblast-like cells aligning dentin-like hard tissue was observed. The tissues formed in the canal of revitalized human tooth are similar to cementum- or bone-like tissue and fibrous connective tissue. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

A saw-tooth plasma actuator for film cooling efficiency enhancement of a shaped hole

Science.gov (United States)

Li, Guozhan; Yu, Jianyang; Liu, Huaping; Chen, Fu; Song, Yanping

2017-08-01

This paper reports the large eddy simulations of the effects of a saw-tooth plasma actuator and the laidback fan-shaped hole on the film cooling flow characteristics, and the numerical results are compared with a corresponding standard configuration (cylindrical hole without the saw-tooth plasma actuator). For this numerical research, the saw-tooth plasma actuator is installed just downstream of the cooling hole and a phenomenological plasma model is employed to provide the 3D plasma force vectors. The results show that thanks to the downward force and the momentum injection effect of the saw-tooth plasma actuator, the cold jet comes closer to the wall surface and extends further downstream. The saw-tooth plasma actuator also induces a new pair of vortex which weakens the strength of the counter-rotating vortex pair (CRVP) and entrains the coolant towards the wall, and thus the diffusion of the cold jet in the crossflow is suppressed. Furthermore, the laidback fan-shaped hole reduces the vertical jet velocity causing the disappearance of downstream spiral separation node vortices, this compensates for the deficiency of the saw-tooth plasma actuator. Both effects of the laidback fan-shaped hole and the saw-tooth plasma actuator effectively control the development of the CRVP whose size and strength are smaller than those of the anti-counter rotating vortex pair in the far field, thus the centerline and the spanwise-averaged film cooling efficiency are enhanced. The average film cooling efficiency is the biggest in the Fan-Dc = 1 case, which is 80% bigger than that in the Fan-Dc = 0 case and 288% bigger than that in the Cyl-Dc = 0 case.

Ultrasonographic Detection of Tooth Flaws

Science.gov (United States)

Bertoncini, C. A.; Hinders, M. K.; Ghorayeb, S. R.

2010-02-01

The goal of our work is to adapt pulse-echo ultrasound into a high resolution imaging modality for early detection of oral diseases and for monitoring treatment outcome. In this talk we discuss our preliminary results in the detection of: demineralization of the enamel and dentin, demineralization or caries under and around existing restorations, caries on occlusal and interproximal surfaces, cracks of enamel and dentin, calculus, and periapical lesions. In vitro immersion tank experiments are compared to results from a handpiece which uses a compliant delay line to couple the ultrasound to the tooth surface. Because the waveform echoes are complex, and in order to make clinical interpretation of ultrasonic waveform data in real time, it is necessary to automatically interpret the signals. We apply the dynamic wavelet fingerprint algorithms to identify and delineate echographic features that correspond to the flaws of interest in teeth. The resulting features show a clear distinction between flawed and unflawed waveforms collected with an ultrasonic handpiece on both phantom and human cadaver teeth.

Retrospective individual dosimetry using EPR of tooth enamel

International Nuclear Information System (INIS)

Skvortzo, V.; Ivannikov, A.; Stepanenko, V.; Wieser, A.; Bougai, A.; Brick, A.; Chumak, V.; Radchuk, V.; Repin, V.; Kirilov, V.

1996-01-01

The results of joint investigations (in the framework of ECP-10 program) aimed on the improvement of the sensitivity and accuracy of the procedure of dose measurement using tooth enamel EPR spectroscopy are presented. It is shown, what the sensitivity of method may be increased using special physical-chemical procedure of the enamel samples treatment, which leads to the reducing of EPR signal of organic components in enamel. Tooth diseases may have an effect on radiation sensitivity of enamel. On the basis of statistical analysis of the results of more then 2000 tooth enamel samples measurements it was shown, what tooth enamel EPR spectroscopy gives opportunity to register contribution into total dose, which is caused by natural environmental radiation and by radioactive contamination. EPR response of enamel to ultraviolet exposure is investigated and possible influences to EPR dosimetry is discussed. The correction factors for EPR dosimetry in real radiation fields are estimated

Severe vincristine-induced polyneuropathy in a teenager with anaplastic medulloblastoma and undiagnosed Charcot-Marie-Tooth disease.

Science.gov (United States)

Aghajan, Yasmin; Yoon, Janet M; Crawford, John Ross

2017-04-24

Severe neuropathy is a known adverse effect of vincristine in patients with Charcot-Marie-Tooth disease (CMT). We present the case of a 16-year-old girl with anaplastic medulloblastoma treated with gross total resection and high-dose craniospinal radiation with adjuvant vincristine chemotherapy who developed acute-onset severe quadriplegia and vocal cord paralysis. Vincristine and radiation therapy were discontinued. Although her neuropathy slowly improved over several weeks, she developed metastatic extraneural medulloblastoma and died 5 months after diagnosis. Subsequent genetic testing revealed previously asymptomatic and undiagnosed CMT1A. Our case highlights the importance of early recognition of acute vincristine neurotoxicity that should raise suspicion of an underlying hereditary neuropathy. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Economic evaluation of single-tooth replacement: dental implant versus fixed partial denture.

Science.gov (United States)

Kim, Younhee; Park, Joo-Yeon; Park, Sun-Young; Oh, Sung-Hee; Jung, YeaJi; Kim, Ji-Min; Yoo, Soo-Yeon; Kim, Seong-Kyun

2014-01-01

This study assessed the cost-effectiveness from a societal perspective of a dental implant compared with a three-unit tooth-supported fixed partial denture (FPD) for the replacement of a single tooth in 2010. A decision tree was developed to estimate cost-effectiveness over a 10-year period. The survival rates of single-tooth implants and FPDs were extracted from a meta-analysis of single-arm studies. Medical costs included initial treatment costs, maintenance costs, and costs to treat complications. Patient surveys were used to obtain the costs of the initial single-tooth implant or FPD. Maintenance costs and costs to treat complications were based on surveys of seven clinical experts at dental clinics or hospitals. Transportation costs were calculated based on the number of visits for implant or FPD treatment. Patient time costs were estimated using the number of visits and time required, hourly wage, and employment rate. Future costs were discounted by 5% to convert to present values. The results of a 10-year period model showed that a single dental implant cost US $261 (clinic) to $342 (hospital) more than an FPD and had an average survival rate that was 10.4% higher. The incremental cost-effectiveness ratio was $2,514 in a clinic and $3,290 in a hospital for a prosthesis in situ for 10 years. The sensitivity analysis showed that initial treatment costs and survival rate influenced the cost-effectiveness. If the cost of an implant were reduced to 80% of the current cost, the implant would become the dominant intervention. Although the level of evidence for effectiveness is low, and some aspects of single-tooth implants or FPDs, such as satisfaction, were not considered, this study will help patients requiring single-tooth replacement to choose the best treatment option.

Topology of modified helical gears and Tooth Contact Analysis (TCA) program

Science.gov (United States)

Litvin, Faydor L.; Zhang, Jiao

1989-01-01

The contents of this report covers: (1) development of optimal geometries for crowned helical gears; (2) a method for their generation; (3) tooth contact analysis (TCA) computer programs for the analysis of meshing and bearing contact of the crowned helical gears; and (4) modelling and simulation of gear shaft deflection. The developed method for synthesis was used to determine the optimal geometry for a crowned helical pinion surface and was directed to localize the bearing contact and guarantee favorable shape and a low level of transmission errors. Two new methods for generation of the crowned helical pinion surface are proposed. One is based on the application of a tool with a surface of revolution that slightly deviates from a regular cone surface. The tool can be used as a grinding wheel or as a shaver. The other is based on a crowning pinion tooth surface with predesigned transmission errors. The pinion tooth surface can be generated by a computer-controlled automatic grinding machine. The TCA program simulates the meshing and bearing contact of the misaligned gears. The transmission errors are also determined. The gear shaft deformation was modelled and investigated. It was found that the deflection of gear shafts has the same effect as gear misalignment.

Flexible, wireless, inductively coupled surface coil resonator for EPR tooth dosimetry

International Nuclear Information System (INIS)

Schreiber, Wilson; Petryakov, Sergey V.; Kmiec, Maciej M.; Feldman, Matthew A.; Wood, Victoria A.; Boyle, Holly K.; Flood, Ann Barry; Williams, Benjamin B.; Swartz, Harold M.; Meaney, Paul M.

2016-01-01

Managing radiation injuries following a catastrophic event where large numbers of people may have been exposed to life-threatening doses of ionizing radiation relies on the availability of biodosimetry to assess whether individuals need to be triaged for care. Electron Paramagnetic Resonance (EPR) tooth dosimetry is a viable method to accurately estimate the amount of ionizing radiation to which an individual has been exposed. In the intended measurement conditions and scenario, it is essential that the measurement process be fast, straightforward and provides meaningful and accurate dose estimations for individuals in the expected measurement conditions. The sensing component of a conventional L-band EPR spectrometer used for tooth dosimetry typically consists of a surface coil resonator that is rigidly, physically attached to the coupler. This design can result in cumbersome operation, limitations in teeth geometries that may be measured and hinder the overall utility of the dosimeter. A novel surface coil resonator has been developed for the currently existing L-band (1.15 GHz) EPR tooth dosimeter for the intended use as a point of care device by minimally trained operators. This resonator development provides further utility to the dosimeter, and increases the usability of the dosimeter by non-expert operators in the intended use scenario. (authors)

Severe tooth wear in Prader-Willi syndrome. A case–control study

Directory of Open Access Journals (Sweden)

Saeves Ronnaug

2012-05-01

Full Text Available Abstract Background Prader-Willi syndrome (PWS is a rare complex multsystemic genetic disorder characterized by severe neonatal hypotonia, endocrine disturbances, hyperphagia and obesity, mild mental retardation, learning disabilities, facial dysmorphology and oral abnormalities. The purpose of the present study was to explore the prevalence of tooth wear and possible risk factors in individuals with Prader-Willi syndrome. Methods Forty-nine individuals (6-40 years with PWS and an age- and sex-matched control group were included. Tooth wear was evaluated from dental casts and intraoral photographs and rated by four examiners using the Visual Erosion Dental Examination (VEDE scoring system and the individual tooth wear index IA. In accordance with the VEDE scoring system, tooth wear was also evaluated clinically. Whole saliva was collected. Results Mean VEDE score was 1.70 ± 1.44 in the PWS group and 0.46 ± 0.36 in the control group (p A was 7.50 (2.60-30.70 in the PWS group and 2.60 (0.90-4.70 among controls (p A; r = 0.82, p A; r = 0.43, p = 0.002. Tooth grinding was also associated with tooth wear in the PWS group, as indicated by the mean VEDE 2.67 ± 1.62 in grinders and 1.14 ± 0.97 in non-grinders (p = 0.001 and median IA values 25.70 (5.48-68.55 in grinders and 5.70 (1.60-9.10 in non-grinders (p = 0.003. Multivariate linear regression analysis was performed with tooth wear as the dependent variable and PWS (yes/no, age, tooth grinding and saliva secretion as independent variables. PWS (yes/no, age and tooth grinding retained a significant association with tooth wear, VEDE (p A (p  Conclusions Our study provides evidence that tooth wear, in terms of both erosion and attrition, is a severe problem in Prader-Willi syndrome. There is therefore considerable need for prosthodontic rehabilitation in young adults with PWS.

Viperous fangs: development and evolution of the venom canal.

Science.gov (United States)

Zahradnicek, Oldrich; Horacek, Ivan; Tucker, Abigail S

2008-01-01

Fangs are specialised long teeth that contain either a superficial groove (Gila monster, Beaded lizard, some colubrid snakes), along which the venom runs, or an enclosed canal (viperid, elapid and atractaspid), down which the venom flows inside the tooth. The fangs of viperid snakes are the most effective venom-delivery structures among vertebrates and have been the focus of scientific interests for more than 200 years. Despite this interest the questions of how the canal at the centre of the fang forms remains unresolved. Two different hypotheses have been suggested. The mainstream hypothesis claims that the venom-conducting canal develops by the invagination of the epithelial wall of the developing tooth germ. The sides of this invagination make contact and finally fuse to form the enclosed canal. The second hypothesis, known as the "brick chimney", claims the venom-conducting canal develops directly by successive dentine deposition as the tooth develops. The fang is thus built up from the tip to the base, without any folding of the tooth surface. In an attempt to cast further light on this subject the early development of the fangs was followed in a pit viper, Trimeresurus albolabris, using the expression of Sonic hedgehog (Shh). We demonstrate that the canal is indeed formed by an early folding event, resulting from an invagination of epithelial cells into the dental mesenchyme. The epithelial cells proliferate to enlarge the canal and then the cells die by apoptosis, forming an empty tube through which the poison runs. The entrance and discharge orifices at either end of the canal develop by a similar invagination but the initial width of the invagination is very different from that in the middle of the tooth, and is associated with higher proliferation. The two sides of the invaginating epithelium never come into contact, leaving the orifice open. The mechanism by which the orifices form can be likened to that observed in reptiles with an open groove along

Relationship between food habits and tooth erosion occurrence in Malaysian University students.

Science.gov (United States)

Manaf, Zahara Abdul; Lee, Mei Tee; Ali, Nor Hazirah Muhammad; Samynathan, Selvamary; Jie, Ying Phor; Ismail, Noor Hasnani; Bibiana Hui Ying, Yong; Wei Seng, Yeo; Yahya, Nurul Asyikin

2012-04-01

Tooth erosion is a growing dental problem; however, the role of diet in the aetiology of tooth erosion is unclear. A cross-sectional study was conducted to determine the association between tooth erosion occurrence and the consumption of acidic foods and drinks among undergraduate university students. A total of 150 undergraduate students (33 males and 117 females) aged 19 to 24 years at Universiti Kebangsaan Malaysia participated in this study. The Basic Erosive Wear Examination was used to assess the occurrence of tooth erosion. Information regarding dental hygiene practices, usual dietary habits, and consumption of acidic foods and drinks was obtained through a structured questionnaire. In all, 68% of subjects had tooth erosion. Subjects who reported having received information about healthy eating were less likely to have tooth erosion (χ(2) [1, N = 150] = 7.328, P = 0.007). The frequencies of milk (OR = 0.29, 95% CI = 0.13-0.67) and tea/coffee (adjusted OR = 0.42, 95% CI = 0.19-0.95) consumption were negatively associated with tooth erosion. Dental hygiene practice, the frequency and amount of acidic food and drink intake, and body mass index classification were not significantly associated with the risk of tooth erosion (P > 0.05). A high prevalence of tooth erosion was observed among this group of students. Preventive measures, such as dietary advice and increased consumption of milk at a younger age, may reduce the occurrence of tooth erosion among this age group.

To Tell the Tooth

Science.gov (United States)

... Activity Sheets 2018 Brushing Calendar Sports Safety National Nutrition Month Choose Water for a Sparkling Smile Holiday Workshop Thanksgiving Back to School Fourth of July Fun Tooth Fairy Sugar Wars Valentine's Day Halloween Defeat Monster Mouth! Color and ...

Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

Science.gov (United States)

Underwood, Charlie; Johanson, Zerina; Smith, Moya Meredith

2016-11-01

The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern.

Mechanisms underlying ectopic persistent tooth-pulp pain following pulpal inflammation.

Directory of Open Access Journals (Sweden)

Shingo Matsuura

Full Text Available In order to clarify the peripheral mechanisms of ectopic persistent pain in a tooth pulp following pulpal inflammation of an adjacent tooth, masseter muscle activity, phosphorylated extracellular signal-regulated protein kinase (pERK and TRPV1 immunohistochemistries and satellite cell activation using glial fibrillary acidic protein (GFAP immunohistochemistry in the trigeminal ganglion (TG were studied in the rats with molar tooth-pulp inflammation. And, Fluorogold (FG and DiI were also used in a neuronal tracing study to analyze if some TG neurons innervate more than one tooth pulp. Complete Freund's adjuvant (CFA or saline was applied into the upper first molar tooth pulp (M1 in pentobarbital-anesthetized rats, and capsaicin was applied into the upper second molar tooth pulp (M2 on day 3 after the CFA or saline application. Mean EMG activity elicited in the masseter muscle by capsaicin application to M2 was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats. The mean number of pERK-immunoreactive (IR TG cells was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats. Application of the satellite cell inhibitor fluorocitrate (FC into TG caused a significant depression of capsaicin-induced masseter muscle activity and a significant reduction of satellite cell activation. The number of TRPV1-IR TG cells innervating M2 was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats, and that was decreased following FC injection into TG. Furthermore, 6% of TG neurons innervating M1 and/or M2 innervated both M1 and M2. These findings suggest that satellite cell activation following tooth pulp inflammation and innervation of multiple tooth pulps by single TG neurons may be involved in the enhancement of the activity of TG neurons innervating adjacent non-inflamed teeth that also show enhancement of TRPV1 expression in TG neurons, resulting in the ectopic persistent tooth

Early development of rostrum saw-teeth in a fossil ray tests classical theories of the evolution of vertebrate dentitions.

Science.gov (United States)

Smith, Moya Meredith; Riley, Alex; Fraser, Gareth J; Underwood, Charlie; Welten, Monique; Kriwet, Jürgen; Pfaff, Cathrin; Johanson, Zerina

2015-10-07

In classical theory, teeth of vertebrate dentitions evolved from co-option of external skin denticles into the oral cavity. This hypothesis predicts that ordered tooth arrangement and regulated replacement in the oral dentition were also derived from skin denticles. The fossil batoid ray Schizorhiza stromeri (Chondrichthyes; Cretaceous) provides a test of this theory. Schizorhiza preserves an extended cartilaginous rostrum with closely spaced, alternating saw-teeth, different from sawfish and sawsharks today. Multiple replacement teeth reveal unique new data from micro-CT scanning, showing how the 'cone-in-cone' series of ordered saw-teeth sets arrange themselves developmentally, to become enclosed by the roots of pre-existing saw-teeth. At the rostrum tip, newly developing saw-teeth are present, as mineralized crown tips within a vascular, cartilaginous furrow; these reorient via two 90° rotations then relocate laterally between previously formed roots. Saw-tooth replacement slows mid-rostrum where fewer saw-teeth are regenerated. These exceptional developmental data reveal regulated order for serial self-renewal, maintaining the saw edge with ever-increasing saw-tooth size. This mimics tooth replacement in chondrichthyans, but differs in the crown reorientation and their enclosure directly between roots of predecessor saw-teeth. Schizorhiza saw-tooth development is decoupled from the jaw teeth and their replacement, dependent on a dental lamina. This highly specialized rostral saw, derived from diversification of skin denticles, is distinct from the dentition and demonstrates the potential developmental plasticity of skin denticles. © 2015 The Authors.

Tooth-germ damage by ionizing radiation

International Nuclear Information System (INIS)

Sobkowiak, E.M.; Beetke, E.; Bienengraeber, V.; Held, M.; Kittner, K.H.

1977-01-01

Experiments on animals (four-week-old dogs) were conducted in an investigation made to study the possibility of dose-dependent tooth-germ damage produced by ionizing radiation. The individual doses were 50 R and 200 R, respectively, and they were administered once to three times at weekly intervals. Hyperemia and edemata could be observed on tooth-germ pulps from 150 R onward. Both of these conditions became more acute as the radiation dose increased (from 150 R to 600 R). Possible damage to both the dentin and enamel is pointed out. (author)

Effect of the vitality of the overdenture abutment tooth on stability of the tooth

Directory of Open Access Journals (Sweden)

Khalid Ahmad Omar Arafa

2016-01-01

Conclusion: It was concluded that the overdenture over vital abutment teeth was more stable, with a lower incidence of tooth mobility and less attachment loss than overdentures placed on nonvital teeth.

Biogeneric tooth: a new mathematical representation for tooth morphology in lower first molars.

Science.gov (United States)

Mehl, Albert; Blanz, Volker; Hickel, Reinhard

2005-08-01

A mathematical representation of tooth morphology may help to improve and automate restorative computer-aided design processes, virtual dental education, and parametric morphology. However, to date, no quantitative formulation has been identified for the description of dental features. The aim of this study was to establish and to validate a mathematical process for describing the morphology of first lower molars. Stone replicas of 170 caries-free first lower molars from young patients were measured three-dimensionally with a resolution of about 100,000 points. First, the average tooth was computed, which captures the common features of the molar's surface quantitatively. For this, the crucial step was to establish a dense point-to-point correspondence between all teeth. The algorithm did not involve any prior knowledge about teeth. In a second step, principal component analysis was carried out. Repeated for 3 different reference teeth, the procedure yielded average teeth that were nearly independent of the reference (less than +/- 40 microm). Additionally, the results indicate that only a few principal components determine a high percentage of the three-dimensional shape variability of first lower molars (e.g. the first five principal components describe 52% of the total variance, the first 10 principal components 72% and the first 20 principal components 83%). With the novel approach presented in this paper, surfaces of teeth can be described efficiently in terms of only a few parameters. This mathematical representation is called the 'biogeneric tooth'.

[Dynamics of tooth decay prevalence in children receiving long-term preventive program in school dental facilities].

Science.gov (United States)

Avraamova, O G; Kulazhenko, T V; Gabitova, K F

2016-01-01

The paper presents the assessment of tooth decay prevalence in clinically homogenous groups of children receiving long-term preventive program (PP) in school dental facilities. Five-years PP were introduced in clinical practice in 2 Moscow schools. Preventive treatment was performed by dental hygienist. The results show that systematic preventive treatment in school dental offices starting from elementary school allows reducing dental caries incidence 46-53% and stabilize the incidence of caries complications. It should be mentioned though that analysis of individualized outcomes proves heterogeneity of study results despite of equal conditions of PP. Potentially significant hence is early diagnostics and treatment of initial caries forms as demineralization foci, especially in children with intensive tooth decay. Optimization of pediatric dentist and dental hygienist activity in school dental facilities is the main factor of caries prevention efficiency.

Daylong Effect of Tooth Brushing or Combination Tooth Brushing and Tongue Cleaning Using Antiplaque®Toothpaste on Volatile Sulphur Compound Levels

Directory of Open Access Journals (Sweden)

Indriasti Indah Wardhany

2013-07-01

Full Text Available Objective: to determine the daylong effect of Antiplaque® toothpaste active copound and the effect of tooth brushing or combination of tooth brushing and tongue cleaning on Volatile Sulphur Compounds (VSC levels. Methods: Clinical experimental double blinded microbiological and clinical examination. Subjects mainly from dental faculty student with or without a chief complain of halitosis. One hundred and twenty subjects were divided into four groups that consist of thirty samples each group. Two group are treatment subjects were divided into four groups that consist thirty samples each group. Two groups are treatment groups using Antiplaque® toothpaste and two groups are control groups using placebo toothpaste. The daylong effects of VSC levels are measured by Halimeter and organoleptic. The intraoral status were measured including periodontal status and tongue index. Result: There are a reduction of VSC levels in both treatment and control group, but the reduction only significant in group using Antiplaque® toothpaste (Wilcoxon signed rank test, p<0.05. There are a reduction of VSC levels in both treatment using Antiplaque® toothpaste, but the combination of tooth brushing and tongue cleaning reduced VSC levels significantly lower than tooth brushing treatment (Mann Whitney U test, P,0.05. Conclusion: Tooth brushing and tongue cleaning using Antiplaque® toothpaste significantly reduced VSC levels.DOI: 10.14693/jdi.v16i2.95

The effect of light-activation sources on tooth bleaching

Science.gov (United States)

Baroudi, Kusai; Hassan, Nadia Aly

2014-01-01

Vital bleaching is one of the most requested cosmetic dental procedures asked by patients who seek a more pleasing smile. This procedure consists of carbamide or hydrogen peroxide gel applications that can be applied in-office or by the patient (at-home/overnight bleaching system). Some in-office treatments utilise whitening light with the objective of speeding up the whitening process. The objective of this article is to review and summarise the current literature with regard to the effect of light-activation sources on in-office tooth bleaching. A literature search was conducted using Medline, accessed via the National Library of Medicine Pub Med from 2003 to 2013 searching for articles relating to effectiveness of light activation sources on in-office tooth bleaching. This study found conflicting evidence on whether light truly improve tooth whitening. Other factors such as, type of stain, initial tooth colour and subject age which can influence tooth bleaching outcome were discussed. Conclusions: The use of light activator sources with in-office bleaching treatment of vital teeth did not increase the efficacy of bleaching or accelerate the bleaching. PMID:25298598

Osteoblast and osteoclast behaviors in the turnover of attachment bones during medaka tooth replacement.

Science.gov (United States)

Mantoku, Akiko; Chatani, Masahiro; Aono, Kazushi; Inohaya, Keiji; Kudo, Akira

2016-01-15

Tooth replacement in polyphyodont is a well-organized system for maintenance of homeostasis of teeth, containing the dynamic structural change in skeletal tissues such as the attachment bone, which is the supporting element of teeth. Histological analyses have revealed the character of tooth replacement, however, the cellular mechanism of how skeletal tissues are modified during tooth replacement is largely unknown. Here, we showed the important role of osteoblasts for controlling osteoclasts to modify the attachment bone during tooth replacement in medaka pharyngeal teeth, coupled with an osterix-DsRed/TRAP-GFP transgenic line to visualize osteoblasts and osteoclasts. In the turnover of the row of attachment bones, these bones were resorbed at the posterior side where most developed functional teeth were located, and generated at the anterior side where teeth were newly erupted, which caused continuous tooth replacement. In the cellular analysis, osteoclasts and osteoblasts were located at attachment bones separately, since mature osteoclasts were localized at the resorbing side and osteoblasts gathered at the generating side. To demonstrate the role of osteoclasts in tooth replacement, we established medaka made deficient in c-fms-a by TALEN. c-fms-a deficient medaka showed hyperplasia of attachment bones along with reduced bone resorption accompanied by a low number of TRAP-positive osteoclasts, indicating an important role of osteoclasts in the turnover of attachment bones. Furthermore, nitroreductase-mediated osteoblast-specific ablation induced disappearance of osteoclasts, indicating that osteoblasts were essential for maintenance of osteoclasts for the proper turnover. Taken together, our results suggested that the medaka attachment bone provides the model to understand the cellular mechanism for tooth replacement, and that osteoblasts act in the coordination of bone morphology by supporting osteoclasts. Copyright © 2015 Elsevier Inc. All rights reserved.

Tooth wear

OpenAIRE

Tušek Ivan; Tušek Jasmina

2014-01-01

Tooth wear is the loss of dental hard tissue that was not caused by decay and represents a common clinical problem of modern man. In the etiology of dental hard tissue lesions there are three dominant mechanisms that may act synergistically or separately:friction (friction), which is caused by abrasion of exogenous, or attrition of endogenous origin, chemical dissolution of dental hard tissues caused by erosion, occlusal stress created by compression and flexion and tension that leads to toot...

Cellular and Molecular Changes in Orthodontic Tooth Movement

Science.gov (United States)

Zainal Ariffin, Shahrul Hisham; Yamamoto, Zulham; Zainol Abidin, lntan Zarina; Megat Abdul Wahab, Rohaya; Zainal Ariffin, Zaidah

2011-01-01

Tooth movement induced by orthodontic treatment can cause sequential reactions involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structures. To better understand the biological processes involved in orthodontic treatment, improve treatment, and reduce adverse side effects, several of these substances have been proposed as biomarkers. Potential biological markers can be collected from different tissue samples, and suitable sampling is important to accurately reflect biological processes. This paper covers the tissue changes that are involved during orthodontic tooth movement such as at compression region (involving osteoblasts), tension region (involving osteoclasts), dental root, and pulp tissues. Besides, the involvement of stem cells and their development towards osteoblasts and osteoclasts during orthodontic treatment have also been explained. Several possible biomarkers representing these biological changes during specific phenomenon, that is, bone remodelling (formation and resorption), inflammation, and root resorption have also been proposed. The knowledge of these biomarkers could be used in accelerating orthodontic treatment. PMID:22125437

Effect of Cervical Lessions on the Tooth FEM Study

Directory of Open Access Journals (Sweden)

Gabriela Bereşescu

2010-12-01

Full Text Available The approach used until recently concerning the phenomena of dental abfraction points to the conclusion that the cervical area of the tooth, were this type of lesion usually occur, concentrates the stress resulted from the action of the forces applied on various areas on the crown. Moreover, any lesion in the cervical area facilitates the possibility of its advance into the tooth, ultimately fracturing it. Our paper presents a FEM (finite element method study on the results of a mechanical analysis of the phenomena involving the tooth damaged by cervical lesions.

Proteomic Analysis of Human Tooth Pulp: Proteomics of Human Tooth

Czech Academy of Sciences Publication Activity Database

Eckhardt, Adam; Jágr, Michal; Pataridis, Statis; Mikšík, Ivan

2014-01-01

Roč. 40, č. 12 (2014), s. 1961-1966 ISSN 0099-2399 R&D Projects: GA ČR(CZ) GA13-17224S; GA ČR(CZ) GAP206/12/0453; GA MZd(CZ) NT14324 Institutional support: RVO:67985823 Keywords : dentin * human pulp * tandem mass spectrometry * tooth proteome * 2-dimensional gel electrophoresis Subject RIV: FF - HEENT, Dentistry Impact factor: 3.375, year: 2014

[Early deciduous tooth loss--the mature or immature eruption of their permanent successors].

Science.gov (United States)

Czecholinski, J A; Kahl, B; Schwarze, C W

1994-04-01

On the basis of 147 panoramic radiographs of 49 patients, this study investigated the influence of the premature loss of deciduous teeth on the formation of their permanent successors at the time of their eruption. Furthermore the study investigated the eruptive movement of the successor teeth at the time of eruption. In addition to detecting the accelerated emergence of still immature successor premolars, the study also determined that the extraction ot the deciduous molars before the age of eight years delayed the eruption of the permanent successors given the absence of an infected deciduous tooth with abscess formation. In relation to the eruptive movement of the permanent molars due to the premature loss of the second deciduous molar, the study ascertained a mesial movement of the first permanent molars and an accelerated eruption of the second permanent molars.

Claustral single cell reactions to tooth pulp stimulation in cats.

Science.gov (United States)

Jastreboff, P; Sikora, M; Frydrychowski, A; Słoniewski, P

1983-01-01

Single unit activity in the central region of the claustrum, evoked by electrical stimulation of tooth pulp or paws was studied on cats under chloralose anesthesia. The majority of cells responded in similar manner to stimulation of tooth pulp or paws, but there were cells with clear preference to a given type of stimulation. Latencies of reactions evoked by tooth pulp stimulation were significantly shorter than those for limb stimulation. In the former case latencies as short as 8 rns were observed. It is postulated that the central region of the claustrum receives a projection from the tooth pulp, and that in those cases with very short latency the projection is direct and does not involve the cerebral cortex.

Human dental age estimation combining third molar(s) development and tooth morphological age predictors.

Science.gov (United States)

Thevissen, P W; Galiti, D; Willems, G

2012-11-01

In the subadult age group, third molar development, as well as age-related morphological tooth information can be observed on panoramic radiographs. The aim of present study was to combine, in subadults, panoramic radiographic data based on developmental stages of third molar(s) and morphological measurements from permanent teeth, in order to evaluate its added age-predicting performances. In the age range between 15 and 23 years, 25 gender-specific radiographs were collected within each age category of 1 year. Third molar development was classified and registered according the 10-point staging and scoring technique proposed by Gleiser and Hunt (1955), modified by Köhler (1994). The Kvaal (1995) measuring technique was applied on the indicated teeth from the individuals' left side. Linear regression models with age as response and third molar-scored stages as explanatory variables were developed, and morphological measurements from permanent teeth were added. From the models, determination coefficients (R (2)) and root-mean-square errors (RMSE) were calculated. Maximal-added age information was reported as a 6 % R² increase and a 0.10-year decrease of RMSE. Forensic dental age estimations on panoramic radiographic data in the subadult group (15-23 year) should only be based on third molar development.

Imaging tooth enamel using zero echo time (ZTE) magnetic resonance imaging

Science.gov (United States)

Rychert, Kevin M.; Zhu, Gang; Kmiec, Maciej M.; Nemani, Venkata K.; Williams, Benjamin B.; Flood, Ann B.; Swartz, Harold M.; Gimi, Barjor

2015-03-01

In an event where many thousands of people may have been exposed to levels of radiation that are sufficient to cause the acute radiation syndrome, we need technology that can estimate the absorbed dose on an individual basis for triage and meaningful medical decision making. Such dose estimates may be achieved using in vivo electron paramagnetic resonance (EPR) tooth biodosimetry, which measures the number of persistent free radicals that are generated in tooth enamel following irradiation. However, the accuracy of dose estimates may be impacted by individual variations in teeth, especially the amount and distribution of enamel in the inhomogeneous sensitive volume of the resonator used to detect the radicals. In order to study the relationship between interpersonal variations in enamel and EPR-based dose estimates, it is desirable to estimate these parameters nondestructively and without adding radiation to the teeth. Magnetic Resonance Imaging (MRI) is capable of acquiring structural and biochemical information without imparting additional radiation, which may be beneficial for many EPR dosimetry studies. However, the extremely short T2 relaxation time in tooth structures precludes tooth imaging using conventional MRI methods. Therefore, we used zero echo time (ZTE) MRI to image teeth ex vivo to assess enamel volumes and spatial distributions. Using these data in combination with the data on the distribution of the transverse radio frequency magnetic field from electromagnetic simulations, we then can identify possible sources of variations in radiation-induced signals detectable by EPR. Unlike conventional MRI, ZTE applies spatial encoding gradients during the RF excitation pulse, thereby facilitating signal acquisition almost immediately after excitation, minimizing signal loss from short T2 relaxation times. ZTE successfully provided volumetric measures of tooth enamel that may be related to variations that impact EPR dosimetry and facilitate the development

A new archaic baleen whale Toipahautea waitaki (early Late Oligocene, New Zealand) and the origins of crown Mysticeti

Science.gov (United States)

Tsai, Cheng-Hsiu; Fordyce, R. Ewan

2018-04-01

A new genus and species of extinct baleen whale †Toipahautea waitaki (Late Oligocene, New Zealand) is based on a skull and associated bones, from the lower Kokoamu Greensand, about 27.5 Ma (local upper Whaingaroan Stage, early Chattian). The upper jaw includes a thin, elongate and apparently toothless maxilla, with evidence of arterial supply for baleen. Open sutures with the premaxilla suggest a flexible (kinetic) upper jaw. The blowhole is well forward. The mandible is bowed laterally and slightly dorsally; unlike the Eomysticetidae, there are no mandibular alveoli, and the coronoid process is tapered and curved laterally. Jaw structure is consistent with baleen-assisted gulp-feeding. The age of early Chattian makes †Toipahautea a very early, if not the oldest named, toothless and baleen-bearing mysticete, suggesting that the full transition from toothed to baleen-bearing probably occurred in the Early Oligocene. Late Oligocene mysticetes vary considerably in jaw form and kinesis, tooth form and function, and development of baleen, implying a wide range of raptorial, suctorial and filter-feeding behaviour. More study may elucidate the function of jaws, teeth and baleen in terms of opportunist/generalist feeding, as in modern gray whales, versus specialized feeding. We here propose that early mysticetes, when transitioned from toothed to baleen-bearing, were generalists and opportunists instead of specializing in any forms of feeding strategies. In addition, two different phylogenetic analyses placed †Toipahautea either in a polytomy including crown Mysticeti, or immediately basal to the crown, and above †Eomysticetidae in both cases. Because the †Toipahautea waitaki holotype is an immature individual, it may plot more basally in phylogeny than its true position.

Comparison of Saudi child versus parent-report of child tooth ...

African Journals Online (AJOL)

2015-09-28

Sep 28, 2015 ... Objective: This cross-sectional study compared Saudi children's tooth-brushing practices as reported by ..... in tooth‑brushing may develop an interactive media for ... and minority children, use computers, play video games, and .... Reisine S, Litt M. Social and psychological theories and their use for dental.

A Dental Hygienist's and Therapist's Guide to the Management of Tooth Erosion.

Science.gov (United States)

Ariyanayagam, Yana

2016-08-01

Dental care professionals can support patients to prevent and manage tooth erosion. The role of the dentist is to restore the structure and function of teeth damaged by acid erosion, while the role of the dental hygienist therapist is to work alongside the dentist to help manage and reduce the risk of tooth erosion. This article will highlight how the dental hygienist or therapist can identify tooth erosion. It will describe the features of tooth erosion and outline the causes. This article will discuss preventative care options for patients who are at risk of tooth erosion, including specific oral hygiene instructions, fluoride advice and use of other dental products.

A design of speed reducer with trapezoidal tooth profile for robot manipulator

Energy Technology Data Exchange (ETDEWEB)

Nam, Won Ki; Oh, Se Hoon [Chung-Ang University, Seoul (Korea, Republic of)

2011-01-15

Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study.

A design of speed reducer with trapezoidal tooth profile for robot manipulator

International Nuclear Information System (INIS)

Nam, Won Ki; Oh, Se Hoon

2011-01-01

Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study

Modern mammal origins: evolutionary grades in the Early Cretaceous of North America.

Science.gov (United States)

Jacobs, L L; Winkler, D A; Murry, P A

1989-07-01

Major groups of modern mammals have their origins in the Mesozoic Era, yet the mammalian fossil record is generally poor for that time interval. Fundamental morphological changes that led to modern mammals are often represented by small samples of isolated teeth. Fortunately, functional wear facets on teeth allow prediction of the morphology of occluding teeth that may be unrepresented by fossils. A major step in mammalian evolution occurred in the Early Cretaceous with the evolution of tribosphenic molars, which characterize marsupials and placentals, the two most abundant and diverse extant groups of mammals. A tooth from the Early Cretaceous (110 million years before present) of Texas tests previous predictions (based on lower molars) of the morphology of upper molars in early tribosphenic dentitions. The lingual cusp (protocone) is primitively without shear facets, as expected, but the cheek side of the tooth is derived (advanced) in having distinctive cusps along the margin. The tooth, although distressingly inadequate to define many features of the organism, demonstrates unexpected morphological diversity at a strategic stage of mammalian evolution and falsifies previous claims of the earliest occurrence of true marsupials.

Mesiodistal tooth angulation to segmental occlusal plane in panoramic radiography

International Nuclear Information System (INIS)

Kim, Jae Duk; Kim, Jin Soo; You, Choong Hyun

2005-01-01

To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occulsion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

Mesiodistal tooth angulation to segmental occlusal plane in panoramic radiography

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Duk; Kim, Jin Soo; You, Choong Hyun [Chosun University College of Medicine, Kwangju (Korea, Republic of)

2005-03-15

To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occulsion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

Clinical Evaluation of Periodontal Tissue Status in Prosthodontic Treatment of Patients with Partial Tooth Loss and Generalized Periodontitis

Directory of Open Access Journals (Sweden)

A. Kushlyk

2018-01-01

Full Text Available The problem of selection and application of dental prostheses in periodontal disease is especially relevant in case of severe generalized periodontitis, which is accompanied by mobile tooth removal resulting in overloading the periodontium of the remaining teeth as well as the increase in tooth mobility. Therefore, in generalized periodontitis, it is important to apply the method of direct dental prosthetic rehabilitation since, in case of partial tooth loss, it will prevent the development of generalized periodontitis complications. The objective of the research was to improve the effectiveness of combination therapy for patients with generalized periodontitis and partial tooth loss applying the developed method of direct fixed dental prosthetic rehabilitation based on the study of the periodontal status. Materials and methods. The study included 129 patients with general periodontitis, II-III degree and partial tooth loss over the age of 45 years. According to prosthodontic treatment, all the patients were divided into three groups: Group I consisted of 42 (20 women and 22 men patients who immediately after tooth extraction were rehabilitated with the application of direct plastic laminar immediate prosthesis and selective tooth grinding; permanent dental prosthetic rehabilitation was performed 6 weeks after tooth extraction; Group II included 43 (21 women and 22 men patients who underwent traditional permanent dental prosthetic rehabilitation using fixed dental bridges 6 weeks after mobile tooth removal and wound healing; Group III comprised 44 (21 women and 23 men patients who immediately after mobile tooth removal were rehabilitated with the application of direct fixed sectional dental bridge (Ukrainian patent UA 20995. 2007 Feb 15 and selective tooth grinding; permanent dental prosthetic rehabilitation was performed 6 months after tooth extraction. The control group consisted of 26 people with intact dentitions over the age of 45 years

Roentgenologic investigations for the anterior tooth length

Energy Technology Data Exchange (ETDEWEB)

Cho, Won Pyo; Ahn, Hyung Kyu [College of Dentistry, Seoul National University , Seoul (Korea, Republic of)

1972-11-15

The author measured the length of crown, root and tooth on the films which was taken by intraoral bisecting technic with mesh plate on the films. The films were taken from the dry skulls, dentiform, same patients who had to be removed their upper incisors, and the other patients who admitted for dental care. From this serial experiment the results were made as follows: 1. By using the film and mesh plate in the oral cavity, the real tooth length can be measured easily on the film surfaces. 2. The film distortion in the oral cavity can be avoided when taking the film using the mesh plate and film together. 3. When measuring the film, length of crown was elongated and length of root was shortened. 4. When using the well-trained bisecting technic, the real tooth length can be measured directly on the intraoral film.

Relationship between human tooth enamel free radical concentration and radiation dose

International Nuclear Information System (INIS)

Zhou Yongzeng; Wang Jiadong; Jia Xiaomei; Wu Ke; Cong Jianbo; Sun Cunpu

1999-01-01

Free radical concentrations of 25 adult tooth enamel samples were measured by electron spin resonance (ESR) technique in this paper, and the relationship between free radical concentration of tooth enamel and radiation dose was also investigated. In the 25 adult enamel samples they are 16 male samples and 9 female samples, Ages of tooth donors range from 18-41 years. Difference in background ESR signal intensity between male and female samples was no observed; free radical concentration (or increment of radiation-induced free radical concentration) in tooth enamel increases linearly with increasing of radiation dose. In the case of radiation accident, the study results of this paper could be applied to dose estimation when conditions of ESR measurement of exposed individual tooth enamel are similar to measurement conditions of dose-effect calibration curve in this paper

Australian aboriginal tooth succession, interproximal attrition, and Begg's theory.

Science.gov (United States)

Corruccini, R S

1990-04-01

In 1954, P.R. Begg analyzed interproximal attrition as a prehistorically universal mechanism to reduce tooth size. With modern processed diets and the virtual disappearance of constant interproximal attrition, Begg asserted, teeth remain too large for the arches and become crowded. Later investigators have questioned Begg's estimate of attritional tooth-size reduction, as well as aspects of his theory relating the succession sequence of permanent teeth to different malocclusions. The present paper examines the theory using longitudinal casts and records of modern Australian aborigines who are among the first generation lacking notable interproximal attrition thanks to a "modernized" diet. Deciduous and permanent tooth size, arch size, and occlusal relational variables were analyzed with respect to the expected occlusal outcomes in the absence of attritional tooth reduction. Permanent incisor overjet correlated with crowding status, as predicted by Begg. On the other hand, longer teeth did not relate to crowding in general nor to crowding in relevant local areas or during developmental stages. Unfavorable leeway space did not relate clearly to crowding or other malocclusions. Lowered correlations among structures and narrowness of the maxilla related more significantly to malocclusion. These results are in keeping with recent thinking that small jaws rather than large teeth underlie tooth/arch discrepancy.

Pliocene Paleoenvironments of the Awash Valley, Ethiopia: The Isotope Record of Tooth Enamel and its Relevance to the Pliocene Paleoclimate of Northeastern Africa

Science.gov (United States)

Bedaso, Z. K.; Wynn, J. G.; Alemseged, Z.

2010-12-01

Understanding patterns of Pliocene environmental and climate change using data from terrestrial deposits helps to identify factors which govern the climate, and to unravel potential links between regional and global climate conditions. We use the stable carbon (C) and oxygen (O) isotopic composition of bioapatite from fossil tooth enamel to reconstruct Pliocene environmental and climatic changes at Dikika and Galili, in the Awash valley of Ethiopia. Our application of C and O isotopes aims principally at reconstructing shifts in floral composition, such as the relative abundance of C4 grasses, and its implications for climate indicators including temperature, aridity, and seasonality, and the role of climate in early hominin evolution. C isotopic composition of tooth enamel is based on differences in C isotope discrimination between plants that use the two major photosynthetic pathways (C3 and C4), the abundance of which are driven by climate variables, and the transfer of this “signature” between plant foods in the diet of mammals and mammalian tooth enamel δ13C values (ɛdiet-enamel). A change in δ13Cenamel values between 5.26 and 3.24 Ma provides insight to early hominin environments, which varied from open woodland and grassland to closed woodland in the early to mid Pliocene at Galili and wooded grassland both in Galili and Dikika in the late Pliocene. Similarly, the O isotopic composition of tooth enamel is a function of the isotopic composition of body water, which in turn is a function of meteoric and physiological processes, and therefore may also reflect local climatic conditions if the physiological factors can be constrained. Using an O isotope enrichment factor between δ18Oenamel carbonate and δ18Obody water (ɛEC-BW =26.3) and between evaporation sensitive and insensitive taxa (ɛES-EI = 2.1-4.2), we estimate the Pliocene δ18O value of meteoric water, which ranges from -2.4 to -5.2 ‰ in early and mid Pliocene respectively. An observed

Nutritional status, tooth wear and quality of life in Brazilian schoolchildren.

Science.gov (United States)

Andrade, Francisco Juliherme Pires de; Sales-Peres, André de Carvalho; Moura-Grec, Patricia Garcia de; Mapengo, Marta Artemisa Abel; Sales-Peres, Arsenio; Sales-Peres, Sílvia Helena de Carvalho

2016-06-01

To evaluate the correlation among nutritional status, tooth wear and quality of life in Brazilian schoolchildren. The study followed a cross-sectional design. Nutritional status was measured via anthropometry using BMI and tooth wear was measured using the Dental Wear Index; both these assessments were carried out by a trained recorder according to standard criteria. A modified version of the Child Oral Impacts on Daily Performances was used to assess quality of life. City of Bauru, in Brazil. A cluster sample of 396 schoolchildren (194 boys and 202 girls) aged 7-10 years. The anthropometric assessment showed similar situations for both sexes regarding underweight (31·40 % in boys and 30·20 % in girls) and overweight/obesity (33·96 % in boys and 33·17 % in girls). The underweight children showed a greater severity of tooth wear in the primary teeth (OR=0·72; CI 0·36, 1·42), although in the permanent dentition the obese children had a greater severity of tooth wear (OR=1·42; 95 % CI 0·31, 6·55). The tooth wear was correlated with age for both dentitions. Tooth wear in the primary and permanent dentition may be related to nutritional status. Tooth wear and obesity did not have a significant impact on the schoolchildren's perception of quality of life.

Anomalies of tooth formation in hypohidrotic ectodermal dysplasia

DEFF Research Database (Denmark)

Lexner, Michala O; Bardow, Allan; Hertz, Jens Michael

2007-01-01

OBJECTIVE: The X-linked hypohidrotic ectodermal dysplasia (HED) is the most common type of ectodermal dysplasia. The clinical identification of possible heterozygous females can be difficult because of the varying degrees of clinical signs caused by X-chromosome inactivation. This study is the fi......OBJECTIVE: The X-linked hypohidrotic ectodermal dysplasia (HED) is the most common type of ectodermal dysplasia. The clinical identification of possible heterozygous females can be difficult because of the varying degrees of clinical signs caused by X-chromosome inactivation. This study...... affected males had multiple missing permanent teeth and tooth malformations. The heterozygous females had a significantly higher frequency of agenesis of permanent teeth compared to normative data. The heterozygous females had an increased prevalence of tooth malformations and reduced tooth size...

Efficacy of tooth whitening with different calcium phosphate-based formulations.

Science.gov (United States)

Jin, Jian; Xu, Xiaohui; Lai, Guangyun; Kunzelmann, Karl-Heinz

2013-08-01

The aim of this in-vitro study was to evaluate the efficacy of tooth whitening using different calcium phosphate-based formulations. Teeth were treated with three different hydroxyapatite preparations at different concentrations and with two control preparations; each tooth was treated a total of three times. After application of the last material, hydrodynamic shear force was applied to mimic mechanical loading. After each treatment, tooth color was measured using a dental spectrophotometer, and the mean changes in L*a*b* values between different measurements were expressed as ∆E. The results indicated significant differences between the materials, but neither dose- nor time-dependent associations were found. The suspension containing tricalcium phosphate (10 wt%) showed the most obvious color change (∆E = 2.20 ± 0.90), while the suspension containing zinc-carbonate-apatite (20 wt%) showed the least obvious color change (∆E = 0.91 ± 0.50). Calcium phosphate-based formulations that can adhere to the enamel surface and contribute to tooth whitening have promising tooth-whitening potential. © 2013 Eur J Oral Sci.

Charcot-Marie-Tooth disease-linked protein SIMPLE functions with the ESCRT machinery in endosomal trafficking

OpenAIRE

Lee, Samuel M.; Chin, Lih-Shen; Li, Lian

2012-01-01

Mutations in small integral membrane protein of lysosome/late endosome (SIMPLE) cause autosomal dominant, Charcot-Marie-Tooth disease (CMT) type 1C. The cellular function of SIMPLE is unknown and the pathogenic mechanism of SIMPLE mutations remains elusive. Here, we report that SIMPLE interacted and colocalized with endosomal sorting complex required for transport (ESCRT) components STAM1, Hrs, and TSG101 on early endosomes and functioned with the ESCRT machinery in the control of endosome-to...

Early Childhood Development and E-Learning in Africa: The Early Childhood Development Virtual University Programme

Science.gov (United States)

Pence, Alan

2007-01-01

This article explores the development and evaluation of the graduate-level Early Childhood Development Virtual University (ECDVU) programme in Sub-Saharan Africa from 2001 through to 2004. It outlines the history of the ECDVU and the establishing of a Sub-Saharan programme for future leaders in the early childhood field guided by the key principle…

A comparison of new and conventional methods for quantification of tooth color

NARCIS (Netherlands)

Burgt, van der T.P.; Bosch, ten J.J.; Borsboom, P.C.F.; Kortsmit, W.J.P.M.

1990-01-01

Tooth color is caused by volume reflection, that is, passage of incident light through the tooth followed by backward emergence. This passage is concurrent with sideward displacement of photons that, in effect, influences the result of usual instrumental methods of determining tooth color. This

SIGNS Molar tooth sign − looking beyond the obvious

African Journals Online (AJOL)

tooth are represented by thick, perpendicular, non-decussated superior cerebellar peduncles, while the 'body' of the molar tooth is formed by the cerebral peduncles of the brainstem with a deep interpeduncular fossa (Fig. 1a).[3]. Diffusion tensor tractography confirms the failure of superior cerebellar peduncle decussation.

Geographic Variations in the EPR Spectrum of Tooth Enamel

International Nuclear Information System (INIS)

Romanyukha, A.A.; Hayes, R.B.; Haskell, E.H.; Kenner, G.H.

1999-01-01

The presence of stable radiation-induced radicals in the mineral component of tooth enamel allows use of this material as a biological dosemeter. Estimation of the dose absorbed in tooth enamel can be done by EPR. Generally, for the purpose of dose reconstruction, the EPR spectrum of tooth enamel is interpreted in terms of two main components. The first is a broad background signal often called the native signal centered at a g value of 2.0045. The origin of this signal is not precisely known. The second main component in the tooth enamel spectrum is purely radiation induced and can be used for retrospective dosimetry. Internal structure of the native signal and variations of its amplitude and linewidth were investigated for the samples prepared from modern teeth obtained from different geographic locations (USA and Russia). Possible reasons for the variations observed are discussed as are the potential effects of the variations on the reliability of dose estimation. (author)

Treatment of Necrotic Calcified Tooth Using Intentional Replantation Procedure

Directory of Open Access Journals (Sweden)

Nima Moradi Majd

2014-01-01

Full Text Available Introduction. If the teeth are impacted by a chronic irritant, the pulp space possibly will undergo calcific changes that may impede access opening during root canal treatment. In such cases that conventional endodontic treatment is impossible or impractical, intentional replantation may be considered as a last solution to preserve the tooth. Methods. After failing to perform conventional root canal therapy for a necrotic calcified right mandibular second premolar, the tooth was gently extracted. The root apex was resected and the root end cavity was prepared and filled with calcium enriched mixture (CEM cement. Then, the extracted tooth was replanted in its original position. Results. After a year the tooth was asymptomatic, and the size of periapical radiolucency was remarkably reduced and no clinical sign of ankylosis was observed. Conclusion. Intentional replantation of the necrotic calcified teeth could be considered as an alternative to teeth extraction, especially for the single-rooted teeth and when nonsurgical and surgical endodontic procedures seem impossible.

A Simulation Model for Designing Effective Interventions in Early Childhood Caries

OpenAIRE

Hirsch, Gary B.; Edelstein, Burton L.; Frosh, Marcy; Anselmo, Theresa

2012-01-01

Introduction Early childhood caries (ECC) — tooth decay among children younger than 6 years — is prevalent and consequential, affecting nearly half of US 5-year-olds, despite being highly preventable. Various interventions have been explored to limit caries activity leading to cavities, but little is known about the long-term effects and costs of these interventions. We developed a system dynamics model to determine which interventions, singly and in combination, could have the greatest effec...

Development of patient-based questionnaire about aesthetic and functional differences between overdentures implant-supported and overdentures tooth-supported. Study of 43 patients with a follow up of 1 year

OpenAIRE

GARGARI, M.; PRETE, V.; PUJIA, M.; CERUSO, F. M.

2013-01-01

Development of patient-based questionnaire about aesthetic and functional differences between overdentures implant-supported and overdentures tooth-supported. Study of 43 patients with a follow up of 1 year.

Tooth wear risk assessment and care-planning in general dental practice.

Science.gov (United States)

O'Toole, S; Khan, M; Patel, A; Patel, N J; Shah, N; Bartlett, D; Movahedi, S

2018-03-09

Objective To assess charting, risk assessment and treatment-planning of tooth wear between recently qualified and experienced dentists in general dental practice.Design Service evaluation.Setting Multi-setting evaluation of three mixed NHS/Private general dental practices in North-East London.Methods The clinical notes of new patient examinations on dentate adults presenting from the 1 October 2016 to 31 December 2016 were audited collecting data on tooth wear charting, risk assessment and treatment planning. Data were analysed using descriptives, chi square and logistic regressions in SPSS. Significance was inferred at p charted for 48% of those attending foundation dentists and 5% of those attending experienced dentists. Diet was assessed in 50.6% of patients examined by foundation dentists and 1.0% of patients examined by experienced dentists. Foundation dentists were more likely to chart tooth wear, risk assess and preventively manage tooth wear compared to experienced dentists (p <0.001).Conclusion This service evaluation highlights that improvements are required in recording, risk assessing and preventive treatment planning of erosive tooth wear. Experienced dentists were less likely to risk assess tooth wear and less likely to provide preventive treatment. Experienced GDPs may benefit from re-training in this area.

Camel molar tooth enamel response to gamma rays using EPR spectroscopy.

Science.gov (United States)

El-Faramawy, N A; El-Somany, I; Mansour, A; Maghraby, A M; Eissa, H; Wieser, A

2018-03-01

Tooth enamel samples from molar teeth of camel were prepared using a combined procedure of mechanical and chemical tooth treatment. Based on electron paramagnetic resonance (EPR) spectroscopy, the dose response of tooth enamel samples was examined and compared to that of human enamel. The EPR dose response of the tooth enamel samples was obtained through irradiation to gamma doses from 1 Gy up to 100 kGy. It was found that the radiation-induced EPR signal increased linearly with gamma dose for all studied tooth enamel samples, up to about 15 kGy. At higher doses, the dose response curve leveled off. The results revealed that the location of the native signal of camel tooth enamel was similar to that of enamel from human molars at 2.00644, but different from that of enamel from cows and goats. In addition, the peak-to-peak width (ΔH pp ) for human and camel molar teeth was similar. It was also found that the response of camel enamel to gamma radiation was 36% lower than that of human enamel. In conclusion, the results indicate the suitability of camel teeth for retrospective gamma dosimetry.

Camel molar tooth enamel response to gamma rays using EPR spectroscopy

Energy Technology Data Exchange (ETDEWEB)

El-Faramawy, N.A.; El-Somany, I. [Ain Shams University, Physics Department, Faculty of Science, Cairo (Egypt); Mansour, A. [National Center for Radiation Research and Technology, Atomic Energy Authority, Cairo (Egypt); Maghraby, A.M.; Eissa, H. [National Institute of Standards (NIS), Ionizing Radiation Metrology Laboratory, Giza (Egypt); Wieser, A. [Helmholtz Zentrum Muenchen-German Research Center for Environmental Health, Department of Radiation Sciences, Institute of Radiation Protection, Neuherberg (Germany)

2018-03-15

Tooth enamel samples from molar teeth of camel were prepared using a combined procedure of mechanical and chemical tooth treatment. Based on electron paramagnetic resonance (EPR) spectroscopy, the dose response of tooth enamel samples was examined and compared to that of human enamel. The EPR dose response of the tooth enamel samples was obtained through irradiation to gamma doses from 1 Gy up to 100 kGy. It was found that the radiation-induced EPR signal increased linearly with gamma dose for all studied tooth enamel samples, up to about 15 kGy. At higher doses, the dose response curve leveled off. The results revealed that the location of the native signal of camel tooth enamel was similar to that of enamel from human molars at 2.00644, but different from that of enamel from cows and goats. In addition, the peak-to-peak width (ΔH{sub pp}) for human and camel molar teeth was similar. It was also found that the response of camel enamel to gamma radiation was 36% lower than that of human enamel. In conclusion, the results indicate the suitability of camel teeth for retrospective gamma dosimetry. (orig.)

Metabolism in tooth enamel and reliability of retrospective EPR dosimetry connected with Chernobyl accident

International Nuclear Information System (INIS)

Brik, A.; Radchuk, V.; Scherbina, O.; Matyash, M.; Gaver, O.

1996-01-01

It is shown that the results of retrospective EPR dosimetry by tooth enamel are essentially determined by the fact that tooth enamel is the mineral of biological origin. The structure of tooth enamel, properties of radiation defects and the role of metabolism in tooth enamel are discussed. It is shown that at deep metamorphic modifications tooth enamel don't save information about its radiation history. The reliability and accuracy of retrospective EPR dosimetry are discussed. Because after Chernobyl accident have passed 10 years the application of tooth enamel for reconstruction of doses which are connected with Chernobyl accident need care and additional investigations

Accuracy and precision of estimating age of gray wolves by tooth wear

Science.gov (United States)

Gipson, P.S.; Ballard, W.B.; Nowak, R.M.; Mech, L.D.

2000-01-01

We evaluated the accuracy and precision of tooth wear for aging gray wolves (Canis lupus) from Alaska, Minnesota, and Ontario based on 47 known-age or known-minimum-age skulls. Estimates of age using tooth wear and a commercial cementum annuli-aging service were useful for wolves up to 14 years old. The precision of estimates from cementum annuli was greater than estimates from tooth wear, but tooth wear estimates are more applicable in the field. We tended to overestimate age by 1-2 years and occasionally by 3 or 4 years. The commercial service aged young wolves with cementum annuli to within ?? 1 year of actual age, but under estimated ages of wolves ???9 years old by 1-3 years. No differences were detected in tooth wear patterns for wild wolves from Alaska, Minnesota, and Ontario, nor between captive and wild wolves. Tooth wear was not appropriate for aging wolves with an underbite that prevented normal wear or severely broken and missing teeth.

Anthropology, tooth wear, and occlusion ab origine.

Science.gov (United States)

Young, W G

1998-11-01

The purpose of this essay is to emphasize that anthropology, the study of man in his environments, is a potent tool for scientific discovery and inspiration in dental science. It attempts to capture flashes of creative anthropological insight which have illuminated studies of tooth wear and occlusion in the past. While it documents contributions, understandings, and misunderstandings from Australian and New Zealand dentists, it is not a hagiography. The real saint of this essay is the Australian aborigine. For when men and women are understood in their environments, much is learned from them which challenges preconceptions of our dental science culture. The essay concludes that new, contemporary Australian culture needs to be studied by anthropological approaches if we are to understand how dental erosion is exacerbating tooth wear and damaging the occlusions of contemporary Australians. Much remains to be discovered about contemporary lifestyles, habits, and diets that lead to dental erosion, the principal cause of contemporary tooth wear in this part of the world.

Computer-Assisted Technique for Surgical Tooth Extraction

Directory of Open Access Journals (Sweden)

Hosamuddin Hamza

2016-01-01

Full Text Available Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut. Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome. In addition, the conventional surgical cutting tools (surgical burs are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures.

Effect of drugs on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Siti Sarah Aulia Amrullah

2016-06-01

Full Text Available Orthodontic tooth movement is basically a biological response to mechanical forces given to the teeth in orthodontic treatment, which involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structure. Remodeling changes in periodontal tissues are considered to be essential in effecting orthodontic tooth movement which is the base of orthodontic correction. Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can influence mechanically stressed periodontal tissue through the circulation and interact with target cell combination of which may be inhibitory, additive or synergize. Medications might have an important influence on the rate of tooth movement, and information on their consumption is essential to adequately discuss treatment planning with patients. Therefore it is imperative to the practitioners being in medical profession, must pay close attention to the drug consumption history of every patient before and during the course of treatment.

Experience of racism and tooth brushing among pregnant Aboriginal Australians: exploring psychosocial mediators.

Science.gov (United States)

Ben, J; Jamieson, L M; Priest, N; Parker, E J; Roberts-Thomson, K F; Lawrence, H P; Broughton, J; Paradies, Y

2014-09-01

Despite burgeoning evidence regarding the pathways by which experiences of racism influence health outcomes, little attention has been paid to the relationship between racism and oral health-related behaviours in particular. We hypothesised that self-reported racism was associated with tooth brushing, and that this association was mediated by perceived stress and sense of control and moderated by social support. Data from 365 pregnant Aboriginal Australian women were used to evaluate tooth brushing behaviour, sociodemographic factors, psychosocial factors, general health, risk behaviours and racism exposure. Bivariate associations were explored and hierarchical logistic regression models estimated odds ratios (OR) and 95% confidence intervals (CI) for tooth brushing. Perceived stress and sense of control were examined as mediators of the association between self-reported racism and tooth brushing using binary mediation with bootstrapping. High levels of self-reported racism persisted as a risk indicator for tooth brushing (OR 0.51, 95%CI 0.27,0.98) after controlling for significant covariates. Perceived stress mediated the relationship between self-reported racism and tooth brushing: the direct effect of racism on tooth brushing was attenuated, and the indirect effect on tooth brushing was significant (beta coefficient -0.09; bias-corrected 95%CI -0.166,-0.028; 48.1% of effect mediated). Sense of control was insignificant as a mediator of the relationship between racism and tooth brushing. High levels of self-reported racism were associated with non-optimal tooth brushing behaviours, and perceived stress mediated this association among this sample of pregnant Aboriginal women.. Limitations and implications are discussed.

Tooth loss associated with physical and cognitive decline in older adults.

Science.gov (United States)

Tsakos, Georgios; Watt, Richard G; Rouxel, Patrick L; de Oliveira, Cesar; Demakakos, Panayotes

2015-01-01

To examine the effect of total tooth loss (edentulousness) on decline in physical and cognitive functioning over 10 years in older adults in England. Secondary data analysis. English Longitudinal Study of Ageing, a national prospective cohort study of community-dwelling people aged 50 and older. Individuals aged 60 and older (N = 3,166). Cognitive function (memory) was measured using a 10-word recall test. Physical function was assessed using gait speed (m/s). Generalized estimating equations were used to model associations between baseline edentulousness and six repeated measurements of gait speed and memory from 2002-03 to 2012-13. Models were sequentially adjusted for time, demographic characteristics, socioeconomic status, comorbidities, health behaviors, depressive symptoms, and anthropometric measurements and mutually adjusted for gait speed or memory. Edentulous participants recalled 0.88 fewer words and were 0.09 m/s slower than dentate participants after adjusting for time and demographics. Only the latter association remained significant after full adjustment, with edentulous participants being 0.02 m/s slower than dentate participants. In age-stratified analyses, baseline edentulousness was associated with both outcomes in fully adjusted models in participants aged 60 to 74 but not in those aged 75 and older. Supplementary analysis indicated significant associations between baseline edentulousness and 4-year change in gait speed and memory in participants aged 60 to 74; the former was fully explained in the fully adjusted model and the latter after adjusting for socioeconomic status. Total tooth loss was independently associated with physical and cognitive decline in older adults in England. Tooth loss is a potential early marker of decline in older age. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

Regenerative treatment of an immature, traumatized tooth with apical periodontitis: report of a case.

Science.gov (United States)

Cotti, Elisabetta; Mereu, Manuela; Lusso, Daniela

2008-05-01

This case report describes the treatment of a necrotic immature permanent central incisor with complete crown fracture, suspected root fracture, and sinus tract, which was not treated with conventional apexification techniques. Instead, a regenerative approach based on the trauma literature's methods for revascularization was provided. The root canal was gently debrided of necrotic tissue with a sharp spoon excavator and irrigated for only one third of its length with NaOCl and then medicated with calcium hydroxide. After 15 days the sinus tract had healed, and the tooth was asymptomatic. The tooth was accessed, calcium hydroxide was removed, bleeding was stimulated to form an intracanal blood clot, and mineral trioxide aggregate was placed coronally to the blood clot. After 8 months, a coronal calcified barrier was radiographically evident and accompanied with progressive thickening of the root wall and apical closure. Two and a half years after treatment was initiated, the tooth remained asymptomatic, and the sinus tract had not reappeared. The progressive increase in the thickness of the dentinal walls and subsequent apical development suggest that appropriate biologic responses can occur with this type of treatment of the necrotic immature permanent tooth with sinus tract.

Hydroxyapatite coating on damaged tooth surfaces by immersion

International Nuclear Information System (INIS)

Lim, Byoung-Ki; Ryu, Su-Chak; Sun, Fangfang; Koh, Kwangnak; Han, Dong-Wook; Lee, Jaebeom

2009-01-01

Hydroxyapatite (HAp) was coated on scratched areas of a human tooth and HAp disks by the immersion method in a HAp colloidal solution (≤20 μm of average diameter dispersed in DI water). The surface morphologies of the scratched area after immersion for 1-3 months were investigated showing that the damaged surfaces were remarkably recovered. Then, the mechanical property and chemical stability of the HAp coating layers on both specimens were determined via the Vickers hardness test and concentration measurement of extracted Ca 2+ ions, respectively, after strong acidic treatment. The cellular behavior of mouse calvaria-derived pre-osteoblastic cells (MC3T3-E1) was also examined on the HAp layers regenerated on micro-scratched HAp disks for the purpose of their potential applications on maxillofacial bone conservation and reconstruction for prosthetic dentistry, and artificial disk preparation of a vertebral column. The notable loss of Ca 2+ ions under a highly acidic condition was not observed in the layers coated by HAp adsorption, indicating that the coating surface was well adhered with the original surfaces of the respective specimen. Moreover, the HAp adsorption did not adversely affect the adhesion, growth and proliferation of MC3T3-E1 cells on the coated HAp layers for up to 21 days. These results suggest that the HAp coating on the scratched areas of the tooth would be effectively applicable for the development of long-term prevention of micro-cleavage and tooth health supporters to reduce discoloration and further maxillofacial and orthopedic applications.

Helium ion microscopy of enamel crystallites and extracellular tooth enamel matrix.

Science.gov (United States)

Bidlack, Felicitas B; Huynh, Chuong; Marshman, Jeffrey; Goetze, Bernhard

2014-01-01

An unresolved problem in tooth enamel studies has been to analyze simultaneously and with sufficient spatial resolution both mineral and organic phases in their three dimensional (3D) organization in a given specimen. This study aims to address this need using high-resolution imaging to analyze the 3D structural organization of the enamel matrix, especially amelogenin, in relation to forming enamel crystals. Chemically fixed hemi-mandibles from wild type mice were embedded in LR White acrylic resin, polished and briefly etched to expose the organic matrix in developing tooth enamel. Full-length amelogenin was labeled with specific antibodies and 10 nm immuno-gold. This allowed us to use and compare two different high-resolution imaging techniques for the analysis of uncoated samples. Helium ion microscopy (HIM) was applied to study the spatial organization of organic and mineral structures, while field emission scanning electron microscopy (FE-SEM) in various modes, including backscattered electron detection, allowed us to discern the gold-labeled proteins. Wild type enamel in late secretory to early maturation stage reveals adjacent to ameloblasts a lengthwise parallel alignment of the enamel matrix proteins, including full-length amelogenin proteins, which then transitions into a more heterogeneous appearance with increasing distance from the mineralization front. The matrix adjacent to crystal bundles forms a smooth and lacey sheath, whereas between enamel prisms it is organized into spherical components that are interspersed with rod-shaped protein. These findings highlight first, that the heterogeneous organization of the enamel matrix can be visualized in mineralized en bloc samples. Second, our results illustrate that the combination of these techniques is a powerful approach to elucidate the 3D structural organization of organic matrix molecules in mineralizing tissue in nanometer resolution.

Helium ion microscopy of enamel crystallites and extracellular tooth enamel matrix

Directory of Open Access Journals (Sweden)

Felicitas B Bidlack

2014-10-01

Full Text Available An unresolved problem in tooth enamel studies has been to analyze simultaneously and with sufficient spatial resolution both mineral and organic phases in their three dimensional (3D organization in a given specimen. This study aims to address this need using high-resolution imaging to analyze the 3D structural organization of the enamel matrix, especially amelogenin, in relation to forming enamel crystals. Chemically fixed hemi-mandibles from wild type mice were embedded in LR White acrylic resin, polished and briefly etched to expose the organic matrix in developing tooth enamel. Full-length amelogenin was labeled with specific antibodies and 10 nm immuno-gold. This allowed us to use and compare two different high-resolution imaging techniques for the analysis of uncoated samples. Helium ion microscopy (HIM was applied to study the spatial organization of organic and mineral structures, while field emission scanning electron microscopy (FE-SEM in various modes, including backscattered electron detection, allowed us to discern the gold-labeled proteins. Wild type enamel in late secretory to early maturation stage reveals adjacent to ameloblasts a lengthwise parallel alignment of the enamel matrix proteins, including full-length amelogenin proteins, which then transitions into a more heterogeneous appearance with increasing distance from the mineralization front. The matrix adjacent to crystal bundles forms a smooth and lacey sheath, whereas between enamel prisms it is organized into spherical components that are interspersed with rod-shaped protein. These findings highlight first, that the heterogeneous organization of the enamel matrix can be visualized in mineralized en bloc samples. Second, our results illustrate that the combination of these techniques is a powerful approach to elucidate the 3D structural organization of organic matrix molecules in mineralizing tissue in nanometer resolution.

Regenerative Endodontic Treatment with Orthodontic Treatment in a Tooth with Dens Evaginatus: A Case Report with a 4-year Follow-up.

Science.gov (United States)

Natera, Marianella; Mukherjee, Padma M

2018-06-01

Dens evaginatus is a developmental tooth anomaly in which an extra cusp or tubercle protrudes on the occlusal surface of the tooth along with some pulpal tissue. Because of the fragile nature of the protrusion, these teeth are often at risk of pulpal exposure. When this occurs in an immature tooth, regenerative endodontic treatment may be a good treatment approach to promote root formation. There is limited literature that documents the occurrence of orthodontic treatment in teeth that have undergone regenerative endodontic therapy using triple antibiotic paste. Here we present a case of an immature premolar tooth with dens evaginatus that was diagnosed with pulp necrosis and chronic apical abscess. The tooth was treated with regenerative endodontic treatment; after which, the patient received orthodontic treatment with fixed appliances for 2 years. The tooth responded favorably to the regenerative endodontic treatment and orthodontic tooth movement. Clinically and radiographically, all the follow-up examinations revealed an asymptomatic tooth with evidence of periapical healing with stunted root development. The tooth remained asymptomatic even after 4 years. The regenerative endodontic procedure (REP) was successful in treating an immature permanent premolar with pulp necrosis and apical periodontitis with dens evaginatus. In this case, the tooth treated with an REP responded to orthodontic treatment similar to the nonendodontically treated teeth. Further studies are recommended to clarify the precise effects of orthodontic treatment on teeth treated with an REP. Copyright © 2018 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Preventing Tooth Decay: A Guide for Implementing Self-Applied Fluoride in Schools.

Science.gov (United States)

National Inst. of Dental Research (NIH), Bethesda, MD.

This guidebook was developed to assist citizens in initiating programs to prevent tooth decay in young children through the use of fluoridation. It contains outlines for determining the needs of the school and community for fluoride in drinking water, and presents the various steps and activities that are necessary for developing and implementing…

Age-related changes in the tooth-bone interface area of acrodont dentition in the chameleon.

Science.gov (United States)

Dosedělová, Hana; Štěpánková, Kateřina; Zikmund, Tomáš; Lesot, Herve; Kaiser, Jozef; Novotný, Karel; Štembírek, Jan; Knotek, Zdeněk; Zahradníček, Oldřich; Buchtová, Marcela

2016-09-01

Chameleon teeth develop as individual structures at a distance from the developing jaw bone during the pre-hatching period and also partially during the post-hatching period. However, in the adult, all teeth are fused together and tightly attached to the jaw bone by mineralized attachment tissue to form one functional unit. Tooth to bone as well as tooth to tooth attachments are so firm that if injury to the oral cavity occurs, several neighbouring teeth and pieces of jaw can be broken off. We analysed age-related changes in chameleon acrodont dentition, where ankylosis represents a physiological condition, whereas in mammals, ankylosis only occurs in a pathological context. The changes in hard-tissue morphology and mineral composition leading to this fusion were analysed. For this purpose, the lower jaws of chameleons were investigated using X-ray micro-computed tomography, laser-induced breakdown spectroscopy and microprobe analysis. For a long time, the dental pulp cavity remained connected with neighbouring teeth and also to the underlying bone marrow cavity. Then, a progressive filling of the dental pulp cavity by a mineralized matrix occurred, and a complex network of non-mineralized channels remained. The size of these unmineralized channels progressively decreased until they completely disappeared, and the dental pulp cavity was filled by a mineralized matrix over time. Moreover, the distribution of calcium, phosphorus and magnesium showed distinct patterns in the different regions of the tooth-bone interface, with a significant progression of mineralization in dentin as well as in the supporting bone. In conclusion, tooth-bone fusion in chameleons results from an enhanced production of mineralized tissue during post-hatching development. Uncovering the developmental processes underlying these outcomes and performing comparative studies is necessary to better understand physiological ankylosis; for that purpose, the chameleon can serve as a useful model

Erosive and Mechanical Tooth Wear in Viking Age Icelanders.

Science.gov (United States)

Richter, Svend; Eliasson, Sigfus Thor

2017-08-29

(1) Background: The importance of the Icelandic Sagas as a source of information about diet habits in medieval Iceland, and possibly other Nordic countries, is obvious. Extensive tooth wear in archaeological material worldwide has revealed that the main cause of this wear is believed to have been a coarse diet. Near the volcano Hekla, 66 skeletons dated from before 1104 were excavated, and 49 skulls could be evaluated for tooth wear. The purpose of this study was to determine the main causes of tooth wear in light of diet and beverage consumption described in the Sagas; (2) Materials and methods: Two methods were used to evaluate tooth wear and seven for age estimation; (3) Results: Extensive tooth wear was seen in all of the groups, increasing with age. The first molars had the highest score, with no difference between sexes. These had all the similarities seen in wear from a coarse diet, but also presented with characteristics that are seen in erosion in modern Icelanders, through consuming excessive amounts of soft drinks. According to the Sagas, acidic whey was a daily drink and was used for the preservation of food in Iceland, until fairly recently; (4) Conclusions: It is postulated that the consumption of acidic drinks and food, in addition to a coarse and rough diet, played a significant role in the dental wear seen in ancient Icelanders.

Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

Science.gov (United States)

Dianiskova, Simona; Calzolari, Chiara; Migliorati, Marco; Silvestrini-Biavati, Armando; Isola, Gaetano; Savoldi, Fabio; Dalessandri, Domenico; Paganelli, Corrado

2016-01-01

The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of “a substantial risk for irreparable damage” from a new trend called “do-it-yourself” orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment. PMID:27672645

Management of Tooth Wear: A Holistic, Dental, Medical, and Mental Healthcare Approach.

Science.gov (United States)

Ahmed, Khaled E

2016-08-01

Tooth wear is a condition that affects a substantial cohort of dental patients. It has a measurable impact on patients' satisfaction, and overall quality of life. Recently, with growing evidence, our understanding of the aetiology, progression, and management of tooth wear has evolved. The paper argues that pathological tooth wear should not be solely considered as a dental condition, but rather a dental manifestation of other mental and medical disorders. As such, successful management of tooth wear, and its underlying aetiology, requires a holistic, multidisciplinary management approach, involving dental, medical, and mental healthcare providers.

Augmented BMPRIA-mediated BMP signaling in cranial neural crest lineage leads to cleft palate formation and delayed tooth differentiation.

Directory of Open Access Journals (Sweden)

Lu Li

Full Text Available The importance of BMP receptor Ia (BMPRIa mediated signaling in the development of craniofacial organs, including the tooth and palate, has been well illuminated in several mouse models of loss of function, and by its mutations associated with juvenile polyposis syndrome and facial defects in humans. In this study, we took a gain-of-function approach to further address the role of BMPR-IA-mediated signaling in the mesenchymal compartment during tooth and palate development. We generated transgenic mice expressing a constitutively active form of BmprIa (caBmprIa in cranial neural crest (CNC cells that contributes to the dental and palatal mesenchyme. Mice bearing enhanced BMPRIa-mediated signaling in CNC cells exhibit complete cleft palate and delayed odontogenic differentiation. We showed that the cleft palate defect in the transgenic animals is attributed to an altered cell proliferation rate in the anterior palatal mesenchyme and to the delayed palatal elevation in the posterior portion associated with ectopic cartilage formation. Despite enhanced activity of BMP signaling in the dental mesenchyme, tooth development and patterning in transgenic mice appeared normal except delayed odontogenic differentiation. These data support the hypothesis that a finely tuned level of BMPRIa-mediated signaling is essential for normal palate and tooth development.

Behavioral changes during dental appointments in children having tooth extractions

Directory of Open Access Journals (Sweden)

Mariana Gonzalez Cademartori

2017-01-01

Full Text Available Background: Tooth extractions are associated with anxiety-related situations that can cause behavioral problems in pediatric dental clinics. Aim: We aimed to describe the behavior of children during tooth extraction appointments, compare it to their behavior in preceding and subsequent dental appointments, and assess the behavioral differences according to gender, age, type of dentition, and reason for extraction. Settings and Design: This was a retrospective study based on information obtained from records of children between 6 and 13 years of age who were cared for at the Dentistry School in Pelotas, Brazil. Materials and Methods: Child behavior was assessed during the dental appointment that preceded the tooth extraction, during the tooth extraction appointment, and in the subsequent dental appointment using the Venham Behavior Rating Scale. Statistical Analysis: Results were analyzed using the Pearson Chi-square and McNemar tests. Results: Eighty-nine children were included. Cooperative behavior prevailed in all the dental appointments. The prevalence of “mild/intense protest” was higher in the tooth extraction appointments than in the previous or subsequent dental appointments (P < 0.001. No significant differences in behavior were detected between the type of dentition (primary or permanent teeth, reason for extraction or gender. Conclusion: In this sample of children treated at a dental school, the occurrence of uncooperative behavior was higher during the tooth extraction appointments than in the preceding and subsequent dental appointments.

Dose- and time-dependent effects of clodronate on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Enita Nakaš

2017-02-01

Full Text Available Orthodontic tooth movement is the result of bone remodeling that occurs in periodontal ligament and alveolar bone tissue as a response to mechanical loading of the tooth. The aim of this study is to investigate the time- and dose-response effects of locally administered clodronate on tooth movement. Sixty Wistar rats were randomly assigned to 4 groups of 15 specimens: E1 - application of 10 mMol of clodronate in 3-day intervals; E2 - application of 2.5 mMol of clodronate in 3-day intervals; E3 - application of 10 mMol of clodronate in 7-day intervals; E4 - application of 2.5 mMol of clodronate in 7-day intervals. A 50 μL clodronate solution was injected into a subperiosteal area to the right maxillary incisor. The left maxillary incisor served as a control, with an injection of saline solution. In 3-day interval application regime, there was no effect of clodronate dosing on tooth movement. In 7-day interval application regime, decreased tooth movement was observed with 10 mMol compared with 2.5 mMol clodronate concentration. However, decreased tooth movement was also observed when 2.5 mMol of clodronate was applied in 7-versus 3-day intervals. Conversely, no difference was observed when 10 mMol concentration was applied in 3- versus 7-day intervals. When clodronate is applied subperiosteally in the root area, it decreases the tooth movement. Tooth movement is impeded by the higher clodronate dosing, as well as by shorter application interval even with lower dosing. The purpose of future trials should, therefore, be to determine a safe therapeutic dose/interval application of clodronate in humans and their potential side effects.

EPR dosimetry with tooth enamel: A review

International Nuclear Information System (INIS)

Fattibene, Paola; Callens, Freddy

2010-01-01

When tooth enamel is exposed to ionizing radiation, radicals are formed, which can be detected using electron paramagnetic resonance (EPR) techniques. EPR dosimetry using tooth enamel is based on the (presumed) correlation between the intensity or amplitude of some of the radiation-induced signals with the dose absorbed in the enamel. In the present paper a critical review is given of this widely applied dosimetric method. The first part of the paper is fairly fundamental and deals with the main properties of tooth enamel and some of its model systems (e.g., synthetic apatites). Considerable attention is also paid to the numerous radiation-induced and native EPR signals and the radicals responsible for them. The relevant methods for EPR detection, identification and spectrum analyzing are reviewed from a general point of view. Finally, the needs for solid-state modelling and studies of the linearity of the dose response are investigated. The second part is devoted to the practical implementation of EPR dosimetry using enamel. It concerns specific problems of preparation of samples, their irradiation and spectrum acquisition. It also describes how the dosimetric signal intensity and dose can be retrieved from the EPR spectra. Special attention is paid to the energy dependence of the EPR response and to sources of uncertainties. Results of and problems encountered in international intercomparisons and epidemiological studies are also dealt with. In the final section the future of EPR dosimetry with tooth enamel is analyzed.

[Establishment of database with standard 3D tooth crowns based on 3DS MAX].

Science.gov (United States)

Cheng, Xiaosheng; An, Tao; Liao, Wenhe; Dai, Ning; Yu, Qing; Lu, Peijun

2009-08-01

The database with standard 3D tooth crowns has laid the groundwork for dental CAD/CAM system. In this paper, we design the standard tooth crowns in 3DS MAX 9.0 and create a database with these models successfully. Firstly, some key lines are collected from standard tooth pictures. Then we use 3DS MAX 9.0 to design the digital tooth model based on these lines. During the design process, it is important to refer to the standard plaster tooth model. After some tests, the standard tooth models designed with this method are accurate and adaptable; furthermore, it is very easy to perform some operations on the models such as deforming and translating. This method provides a new idea to build the database with standard 3D tooth crowns and a basis for dental CAD/CAM system.

The junctional epithelium originates from the odontogenic epithelium of an erupted tooth.

Science.gov (United States)

Yajima-Himuro, Sara; Oshima, Masamitsu; Yamamoto, Gou; Ogawa, Miho; Furuya, Madoka; Tanaka, Junichi; Nishii, Kousuke; Mishima, Kenji; Tachikawa, Tetsuhiko; Tsuji, Takashi; Yamamoto, Matsuo

2014-05-02

The junctional epithelium (JE) is an epithelial component that is directly attached to the tooth surface and has a protective function against periodontal diseases. In this study, we determined the origin of the JE using a bioengineered tooth technique. We transplanted the bioengineered tooth germ into the alveolar bone with an epithelial component that expressed green fluorescence protein. The reduced enamel epithelium from the bioengineered tooth fused with the oral epithelium, and the JE was apparently formed around the bioengineered tooth 50 days after transplantation. Importantly, the JE exhibited green fluorescence for at least 140 days after transplantation, suggesting that the JE was not replaced by oral epithelium. Therefore, our results demonstrated that the origin of the JE was the odontogenic epithelium, and odontogenic epithelium-derived JE was maintained for a relatively long period.

Tooth microwear formation rate in Gasterosteus aculeatus.

Science.gov (United States)

Baines, D C; Purnell, M A; Hart, P J B

2014-05-01

Tooth microwear feature densities were significantly increased in a population of laboratory-reared three-spined stickleback Gasterosteus aculeatus in four days, after they were transferred from a limnetic feeding regime to a benthic feeding regime. These results show that even in aquatic vertebrates with non-occluding teeth, changes in feeding can cause changes in tooth microwear in just a few days, as in mammals. © 2014 The Authors. Journal of Fish Biology published by John Wiley & Sons Ltd on behalf of The Fisheries Society of the British Isles.

Fibrin glue mixed with platelet-rich fibrin as a scaffold seeded with dental bud cells for tooth regeneration.

Science.gov (United States)

Yang, Kai-Chiang; Wang, Chun-Hao; Chang, Hao-Hueng; Chan, Wing P; Chi, Chau-Hwa; Kuo, Tzong-Fu

2012-11-01

Odontogenesis is a complex process with a series of epithelial-mesenchymal interactions and odontogenic molecular cascades. In tissue engineering of teeth from stem cells, platelet-rich fibrin (PRF), which is rich in growth factors and cytokines, may improve regeneration. Accordingly, PRF was added into fibrin glue to enrich the microenvironment with growth factors. Unerupted second molar tooth buds were harvested from miniature swine and cultured in vitro for 3 weeks to obtain dental bud cells (DBCs). Whole blood was collected for the preparation of PRF and fibrin glue before surgery. DBCs were suspended in fibrin glue and then enclosed with PRF, and the DBC-fibrin glue-PRF composite was autografted back into the original alveolar sockets. Radiographic and histological examinations were used to identify the regenerated tooth structure 36 weeks after implantation. Immunohistochemical staining was used to detect proteins specific to tooth regeneration. One pig developed a complete tooth with crown, root, pulp, enamel, dentin, odontoblast, cementum, blood vessels, and periodontal ligaments in indiscriminate shape. Another animal had an unerupted tooth that expressed cytokeratin 14, dentin matrix protein-1, vascular endothelial growth factor, and osteopontin. This study demonstrated, using autogenic cell transplantation in a porcine model, that DBCs seeded into fibrin glue-PRF could regenerate a complete tooth. Copyright © 2011 John Wiley & Sons, Ltd.

Witkop′s tooth and nail syndrome: A multifaceted approach to dental management

Directory of Open Access Journals (Sweden)

Subramaniam P

2008-03-01

Full Text Available Witkop′s tooth and nail syndrome is a rare autosomal dominant disorder of ectodermal dysplasia characterized by hypodontia and nail dysplasia. Mutations in MSX-1 have been shown to be associated with this syndrome. There is failure of development and eruption of the dentition. Tooth shape may vary; the most common forms are conical and narrow crowns. The nails may be spoon shaped and slow growing and affect both finger and toe nails. The nail involvement is more severe in childhood. The present case describes a 14-year-old boy who showed the characteristic features of Witkop′s syndrome. A multifaceted approach to the dental management of the patient is discussed.

Corticotomy affects both the modus and magnitude of orthodontic tooth movement

DEFF Research Database (Denmark)

Verna, Carlalberta; Cattaneo, Paolo; Dalstra, Michel

2018-01-01

Objective: To analyze whether the decreased bone density due to the manipulation of bone remodeling rate has an influence on the type of the planned tooth movement. Materials and methods: A finite element model of a lower incisor has been developed. The density of the alveolar bone surrounding...

The randomized shortened dental arch study: tooth loss over five years.

Science.gov (United States)

Walter, M H; Hannak, W; Kern, M; Mundt, T; Gernet, W; Weber, A; Wöstmann, B; Stark, H; Werner, D; Hartmann, S; Range, U; Jahn, F; Passia, N; Pospiech, P; Mitov, G; Brückner, J; Wolfart, S; Busche, E; Luthardt, R G; Heydecke, G; Marré, B

2013-04-01

The study was designed to provide clinical outcome data for two treatments of the shortened dental arch (SDA). In a multicenter randomized controlled clinical trial, patients with complete molar loss in one jaw were provided with either a partial removable dental prosthesis (PRDP) retained with precision attachments or treated according to the SDA concept preserving or restoring a premolar occlusion. No implants were placed. The primary outcome was tooth loss. Of 152 treated patients, 132 patients reached the 5-year examination. Over 5 years, 38 patients experienced tooth loss. For the primary outcome tooth loss, the Kaplan-Meier survival rates at 5 years were 0.74 (95% CI 0.64, 0.84) in the PRDP group and 0.74 (95% CI 0.63, 0.85) in the SDA group. For tooth loss in the study jaw, the survival rates at 5 years were 0.88 (95% CI 0.80, 0.95) in the PRDP group and 0.84 (95% CI 0.74, 0.93) in the SDA group. The differences were not significant. No Cox regression models of appropriate fit explaining tooth loss on the patient level could be found. The overall treatment goals of a sustainable oral rehabilitation and the avoidance of further tooth loss over longer periods were not reliably achievable. The influence of the type of prosthetic treatment on tooth loss might have been overestimated. Regarding our results, the patient's view will gain even more importance in the clinical decision between removable and fixed restorations in SDAs.

Minimum intervention dentistry and the management of tooth wear in general practice.

Science.gov (United States)

Meyers, I A

2013-06-01

The incidence of tooth wear, or non-carious tooth surface loss (NCTSL), is increasing and oral rehabilitation of patients with non-carious tooth loss requires strategies that address all the factors relevant to the aetiology and pathogenesis of the condition. The multifactorial nature of tooth wear and the variability in its clinical presentation provides treatment challenges for the clinician and successful management must be more than just restoration. Management must include an appropriate mix of preventive and restorative strategies and an understanding that long-term restorative success is affected by the patient's oral environment, and how diet, lifestyle and medical status can modify this environment. Ultimately, the success of any restorative intervention is very dependent on the stability of the oral environment and the condition of the remaining tooth structure. Minimum intervention dentistry (MID) philosophies are ideally suited to tooth wear cases and an overall MID strategy involving diagnosis, recognition and control of predisposing factors, stabilization of the oral environment, remineralization and restoration of the tooth structure, and ongoing maintenance can be implemented. When restorative treatment is required, contemporary materials and techniques are available that can provide cost-effective and conservative restorative alternatives for patients unable to undergo the complex indirect restorative techniques that are both costly and time consuming to implement. These minimally invasive approaches are not only an economically viable solution, but can provide aesthetic and functional rehabilitation and maintain tooth structure as a precursor to more complex restorative options when required. © 2013 Australian Dental Association.

Photobiomodulation in the Prevention of Tooth Sensitivity Caused by In-Office Dental Bleaching. A Randomized Placebo Preliminary Study.

Science.gov (United States)

Calheiros, Andrea Paiva Corsetti; Moreira, Maria Stella; Gonçalves, Flávia; Aranha, Ana Cecília Correa; Cunha, Sandra Ribeiro; Steiner-Oliveira, Carolina; Eduardo, Carlos de Paula; Ramalho, Karen Müller

2017-08-01

Analyze the effect of photobiomodulation in the prevention of tooth sensitivity after in-office dental bleaching. Tooth sensitivity is a common clinical consequence of dental bleaching. Therapies for prevention of sensitivity have been investigated in literature. This study was developed as a randomized, placebo blind clinical trial. Fifty patients were selected (n = 10) and randomly divided into five groups: (1) control, (2) placebo, (3) laser before bleaching, (4) laser after bleaching, and (5) laser before and after bleaching. Irradiation was performed perpendicularly, in contact, on each tooth during 10 sec per point in two points. The first point was positioned in the middle of the tooth crown and the second in the periapical region. Photobiomodulation was applied using the following parameters: 780 nm, 40 mW, 10 J/cm 2 , 0.4 J per point. Pain was analyzed before, immediately after, and seven subsequent days after bleaching. Patients were instructed to report pain using the scale: 0 = no tooth sensitivity, 1 = gentle sensitivity, 2 = moderate sensitivity, 3 = severe sensitivity. There were no statistical differences between groups at any time (p > 0.05). More studies, with others parameters and different methods of tooth sensitivity analysis, should be performed to complement the results found. Within the limitation of the present study, the laser parameters of photobiomodulation tested in the present study were not efficient in preventing tooth sensitivity after in-office bleaching.

Numeric simulation model for long-term orthodontic tooth movement with contact boundary conditions using the finite element method.

Science.gov (United States)

Hamanaka, Ryo; Yamaoka, Satoshi; Anh, Tuan Nguyen; Tominaga, Jun-Ya; Koga, Yoshiyuki; Yoshida, Noriaki

2017-11-01

Although many attempts have been made to simulate orthodontic tooth movement using the finite element method, most were limited to analyses of the initial displacement in the periodontal ligament and were insufficient to evaluate the effect of orthodontic appliances on long-term tooth movement. Numeric simulation of long-term tooth movement was performed in some studies; however, neither the play between the brackets and archwire nor the interproximal contact forces were considered. The objectives of this study were to simulate long-term orthodontic tooth movement with the edgewise appliance by incorporating those contact conditions into the finite element model and to determine the force system when the space is closed with sliding mechanics. We constructed a 3-dimensional model of maxillary dentition with 0.022-in brackets and 0.019 × 0.025-in archwire. Forces of 100 cN simulating sliding mechanics were applied. The simulation was accomplished on the assumption that bone remodeling correlates with the initial tooth displacement. This method could successfully represent the changes in the moment-to-force ratio: the tooth movement pattern during space closure. We developed a novel method that could simulate the long-term orthodontic tooth movement and accurately determine the force system in the course of time by incorporating contact boundary conditions into finite element analysis. It was also suggested that friction is progressively increased during space closure in sliding mechanics. Copyright © 2017. Published by Elsevier Inc.

Moessbauer Studies of Stannous Fluoride Reactivity with Synthetic Tooth Enamel - A Model for the Tooth Cavity Protection Actions of Novel Dentifrices

International Nuclear Information System (INIS)

Denes, Georges; Muntasar, Abdualhafeed; Kozak, Kathy M.; Baig, Arif A.; White, Donald J.

2002-01-01

SnF 2 is an important toothpaste ingredient, added for the provision of clinical efficacy for hard and soft tissue diseases and in breath protection. Synthetic calcium hydroxyapatite powders were exposed to liquid supernates (25 w/w% toothpaste water slurries, centrifuged) of Crest Gum Care (registered) (SnF 2 ) dentifrice. One-minute treatments were followed by 3x water washing, centrifugation and lyophilization. Post treatment, powders were analyzed by Moessbauer spectroscopy with 0.5-1 gram of treated apatite powder. Results show that tooth mineral stannous fluoride interactions include: (1) formation of surface reaction products with both Sn(II) and Sn(IV) oxidation states; (2) Sn-F binding on mineral surfaces with no evidence of SnO. The surface binding is, however, not pure Sn-F but contains contributions of other ligands, probably oxygens from surface phosphates or hydroxyl groups. Results also suggest that surface reacted stannous tin is oxidized with time, even when bound as a layer on the tooth surface. This study demonstrates for the first time the presence of Sn-F on tooth enamel post treatment and the contribution of passivation to long term stannous chemistry on tooth surfaces. The study also illustrates the practical applications of the Moessbauer technique.

A newer simultaneous space creation, eruption, and adjacent root control spring for the management of impacted tooth

Directory of Open Access Journals (Sweden)

Dipti Shastri

2014-01-01

Full Text Available Usually, treatment of impaction includes: Welcome preparation (to create space, surgical exposure and attachment to the impacted tooth and the orthodontic guidance for the eruption of the impacted tooth. Sometimes, due to deficiency of space, creation of space for impacted tooth requires first, and space regaining efforts may require the distal movement of posterior teeth and or mesial movement of anterior teeth in the arch, but it may create some problems. To overcome the unwanted problem in this clinical situation and to reduce overall treatment duration of the patient, we have developed the Simultaneous space creation, Eruption and Adjacent root control spring to control crown as well as root movement.

Erosive tooth wear in children

NARCIS (Netherlands)

Carvalho, T.S.; Lussi, A.; Jaeggi, T.; Gambon, D.L.; Lussi, A.; Ganss, C.

2014-01-01

Erosive tooth wear in children is a common condition. Besides the anatomical differences between deciduous and permanent teeth, additional histological differences may influence their susceptibility to dissolution. Considering laboratory studies alone, it is not clear whether deciduous teeth are

Tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students

Directory of Open Access Journals (Sweden)

Clement C. Azodo

2010-08-01

Full Text Available Objective: To determine the tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students. Methods: A descriptive cross-sectional study of students of Federal School of Dental Therapy and Technology Enugu, Nigeria. Self-administered questionnaire was used to obtain information on demography, frequency, duration and technique of tooth brushing and tongue cleaning as well as information on consumption of snacks. Results: A total of 242 students responded. Dental technology students made up 52.5% of the respondents and dental therapist in training made up 47.5%. Majority (63.2% of the respondents considered the strength of tooth brush when purchasing a tooth brush and 78.9% use tooth brushes with medium strength. Seven-tenth (71.9% of the respondents brush their teeth twice daily and 52.1% brush for 3–5 minutes. About one-third (30.2% brush their teeth in front of a mirror. Chewing stick was used by 51.7% of respondents in addition to the use of tooth brush. Tongue cleaning was done by 94.2% with only 9.5% using a tongue cleaner. Only 20.2% reported regular snacks consumption. Nine-tenth (90.4% of respondents were previously involved in educating others, apart from their colleagues, on tooth brushing. Conclusion: This survey revealed that most of the dental therapy and technology students had satisfactory tooth-brushing behaviour. The zeal to educate others about proper tooth brushing revealed in this study suggests that the students may be helpful in oral health promotion.

Energy harvesting from mastication forces via a smart tooth

Science.gov (United States)

Bani-Hani, Muath; Karami, M. Amin

2016-04-01

The batteries of the current pacing devices are relatively large and occupy over 60 percent of the size of pulse generators. Therefore, they cannot be placed in the subtle areas of human body. In this paper, the mastication force and the resulting tooth pressure are converted to electricity. The pressure energy can be converted to electricity by using the piezoelectric effect. The tooth crown is used as a power autonomous pulse generator. We refer to this envisioned pulse generator as the smart tooth. The smart tooth is in the form of a dental implant. A piezoelectric vibration energy harvester is designed and modeled for this purpose. The Piezoelectric based energy harvesters investigated and analyzed in this paper initially includes a single degree of freedom piezoelectric based stack energy harvester which utilizes a harvesting circuit employing the case of a purely resistive circuit. The next step is utilizing and investigating a bimorph piezoelectric beam which is integrated/embedded in the smart tooth implant. Mastication process causes the bimorph beam to buckle or return to unbuckled condition. The transitions results in vibration of the piezoelectric beam and thus generate energy. The power estimated by the two mechanisms is in the order of hundreds of microwatts. Both scenarios of the energy harvesters are analytically modeled. The exact analytical solution of the piezoelectric beam energy harvester with Euler-Bernoulli beam assumptions is presented. The electro-mechanical coupling and the geometric nonlinearities have been included in the model for the piezoelectric beam.

Root canal treatment of mandibular second premolar tooth with taurodontism

Directory of Open Access Journals (Sweden)

Vujašković Mirjana

2008-01-01

Full Text Available INTRODUCTION Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. CASE OUTLINE The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. CONCLUSION Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

Novel mutations in the PRX and the MTMR2 genes are responsible for unusual Charcot-Marie-Tooth disease phenotypes.

Science.gov (United States)

Nouioua, Sonia; Hamadouche, Tarik; Funalot, Benoit; Bernard, Rafaëlle; Bellatache, Nora; Bouderba, Radia; Grid, Djamel; Assami, Salima; Benhassine, Traki; Levy, Nicolas; Vallat, Jean-Michel; Tazir, Meriem

2011-08-01

Autosomal recessive Charcot-Marie-Tooth diseases, relatively common in Algeria due to high prevalence of consanguineous marriages, are clinically and genetically heterogeneous. We report on two consanguineous families with demyelinating autosomal recessive Charcot-Marie-Tooth disease (CMT4) associated with novel homozygous mutations in the MTMR2 gene, c.331dupA (p.Arg111LysfsX24) and PRX gene, c.1090C>T (p.Arg364X) respectively, and peculiar clinical phenotypes. The three patients with MTMR2 mutations (CMT4B1 family) had a typical phenotype of severe early onset motor and sensory neuropathy with typical focally folded myelin on nerve biopsy. Associated clinical features included vocal cord paresis, prominent chest deformities and claw hands. Contrasting with the classical presentation of CMT4F (early-onset Dejerine-Sottas phenotype), the four patients with PRX mutations (CMT4F family) had essentially a late age of onset and a protracted and relatively benign evolution, although they presented marked spine deformities. These observations broaden the spectrum of clinical phenotypes associated with these two CMT4 forms. Copyright © 2011 Elsevier B.V. All rights reserved.

Orthodontic tooth movement with clear aligners.

Science.gov (United States)

Drake, Carl T; McGorray, Susan P; Dolce, Calogero; Nair, Madhu; Wheeler, Timothy T

2012-01-01

Clear aligners provide a convenient model to measure orthodontic tooth movement (OTM). We examined the role of in vivo aligner material fatigue and subject-specific factors in tooth movement. Fifteen subjects seeking orthodontic treatment at the University of Florida were enrolled. Results were compared with data previously collected from 37 subjects enrolled in a similar protocol. Subjects were followed prospectively for eight weeks. An upper central incisor was programmed to move 0.5 mm. every two weeks using clear aligners. A duplicate aligner was provided for the second week of each cycle. Weekly polyvinyl siloxane (PVS) impressions were taken, and digital models were fabricated to measure OTM. Initial and final cone beam computed tomography (CBCT) images were obtained to characterize OTM. Results were compared to data from a similar protocol, where subjects received a new aligner biweekly. No significant difference was found in the amount of OTM between the two groups, with mean total OTM of 1.11 mm. (standard deviation (SD) 0.30) and 1.07 mm. (SD 0.33) for the weekly aligner and biweekly control groups, respectively (P = 0.72). Over eight weeks, in two-week intervals, material fatigue does not play a significant role in the rate or amount of tooth movement.

Frequency and risk indicators of tooth decay among pregnant women in France: a cross-sectional analysis.

Science.gov (United States)

Vergnes, Jean-Noel; Kaminski, Monique; Lelong, Nathalie; Musset, Anne-Marie; Sixou, Michel; Nabet, Cathy

2012-01-01

Little is known on the prevalence of tooth decay among pregnant women. Better knowledge of tooth decay risk indicators during pregnancy could help to develop follow-up protocols for women at risk, along with better prevention strategies. The aim of this study was to assess the frequency of tooth decay and the number of decayed teeth per woman in a large sample of pregnant women in France, and to study associated risk indicators. A secondary cross-sectional analysis of data from a French multicentre case-control study was performed. The sample was composed of 1094 at-term women of six maternity units. A dental examination was carried out within 2 to 4 days post-partum. Socio-demographic and behavioural characteristics were obtained through a standardised interview with the women. Medical characteristics were obtained from the women's medical records. Risk indicators associated with tooth decay were identified using a negative binomial hurdle model. 51.6% of the women had tooth decay. The mean number of decayed teeth among women having at least one was 3.1 (s.d. = 2.8). Having tooth decay was statistically associated with lower age (aOR = 1.58, 95%CI [1.03,2.45]), lower educational level (aOR = 1.53, 95%CI [1.06,2.23]) and dental plaque (aOR = 1.75, 95%CI [1.27,2.41]). The number of decayed teeth was associated with the same risk indicators and with non-French nationality and inadequate prenatal care. The frequency of tooth decay and the number of decayed teeth among pregnant women were high. Oral health promotion programmes must continue to inform women and care providers about the importance of dental care before, during and after pregnancy. Future research should also assess the effectiveness of public policies related to oral health in target populations of pregnant women facing challenging social or economic situations.

Monte Carlo modeling of human tooth optical coherence tomography imaging

International Nuclear Information System (INIS)

Shi, Boya; Meng, Zhuo; Wang, Longzhi; Liu, Tiegen

2013-01-01

We present a Monte Carlo model for optical coherence tomography (OCT) imaging of human tooth. The model is implemented by combining the simulation of a Gaussian beam with simulation for photon propagation in a two-layer human tooth model with non-parallel surfaces through a Monte Carlo method. The geometry and the optical parameters of the human tooth model are chosen on the basis of the experimental OCT images. The results show that the simulated OCT images are qualitatively consistent with the experimental ones. Using the model, we demonstrate the following: firstly, two types of photons contribute to the information of morphological features and noise in the OCT image of a human tooth, respectively. Secondly, the critical imaging depth of the tooth model is obtained, and it is found to decrease significantly with increasing mineral loss, simulated as different enamel scattering coefficients. Finally, the best focus position is located below and close to the dental surface by analysis of the effect of focus positions on the OCT signal and critical imaging depth. We anticipate that this modeling will become a powerful and accurate tool for a preliminary numerical study of the OCT technique on diseases of dental hard tissue in human teeth. (paper)

Elderly complete denture wearers: a social approach to tooth loss.

Science.gov (United States)

Papadaki, Eftychia; Anastassiadou, Vassiliki

2012-06-01

To correlate emotional reactions to tooth loss with denture satisfaction attributes in elderly complete denture wearers. Total tooth loss is a serious life event, and poor oral health has an impact on daily life. Edentulism treated by rehabilitation with dentures can have a positive effect on patients' self-image and social behaviour. A group of 80 edentulous subjects undergoing routine prosthetic care in a Greek Department of Prosthetic Dentistry were interviewed using two structured questionnaires. The first questionnaire explored reactions to tooth loss, whereas the second measured their subjective experience of complete dentures. The responses to both questionnaires were compared using the statistical package SPSS v.17. The results showed significant correlation between aspects of tooth loss experience and complete denture satisfaction. Despite the fact that a substantial proportion of patients were satisfied with their complete dentures, some patients experienced increased social and psychological problems related to their edentulousness and the wearing of complete dentures. The aesthetic and functional aspects of complete dentures affected both patients' social behaviour and self-confidence. Total tooth loss was not only reflected in patient's social behaviour and self-image, but it had a complex and multifaceted impact on satisfaction from complete dentures. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Mathematical models for the synthesis and optimization of spiral bevel gear tooth surfaces. [for helicopter transmissions

Science.gov (United States)

Litvin, F. L.; Rahman, P.; Goldrich, R. N.

1982-01-01

The geometry of spiral bevel gears and to their rational design are studied. The nonconjugate tooth surfaces of spiral bevel gears are, in theory, replaced (or approximated) by conjugated tooth surfaces. These surfaces can be generated by two conical surfaces, and by a conical surface and a revolution. Although these conjugated tooth surfaces are simpler than the actual ones, the determination of their principal curvatures and directions is still a complicated problem. Therefore, a new approach, to the solution of these is proposed. Direct relationships between the principal curvatures and directions of the tool surface and those of the generated gear surface are obtained. With the aid of these analytical tools, the Hertzian contact problem for conjugate tooth surfaces can be solved. These results are useful in determining compressive load capacity and surface fatigue life of spiral bevel gears. A general theory of kinematical errors exerted by manufacturing and assembly errors is developed. This theory is used to determine the analytical relationship between gear misalignments and kinematical errors. This is important to the study of noise and vibration in geared systems.

Vital tooth with periapical lesion: spontaneous healing after conservative treatment

Directory of Open Access Journals (Sweden)

Hyun-Joo Kim

2012-05-01

Full Text Available It is often presumed that apical periodontitis follows total pulp necrosis, and consequently root canal treatment is commonly performed. Periapical lesion development is usually caused by bacteria and its byproduct which irritate pulp, develop pulpitis, and result in necrosis through an irreversible process. Afterwards, apical periodontitis occurs. This phenomenon is observed as an apical radiolucency in radiographic view. However, this unusual case presents a spontaneous healing of periapical lesion, which has developed without pulp necrosis in a vital tooth, through conservative treatment.

Kinematics modeling and experimentation of the multi-manipulator tooth-arrangement robot for full denture manufacturing.

Science.gov (United States)

Zhang, Yong-de; Jiang, Jin-gang; Liang, Ting; Hu, Wei-ping

2011-12-01

Artificial teeth are very complicated in shape, and not easy to be grasped and manipulated accurately by a single robot. The method of tooth-arrangement by multi-manipulator for complete denture manufacturing proposed in this paper. A novel complete denture manufacturing mechanism is designed based on multi-manipulator and dental arch generator. Kinematics model of the multi-manipulator tooth-arrangement robot is built by analytical method based on tooth-arrangement principle for full denture. Preliminary experiments on tooth-arrangement are performed using the multi-manipulator tooth-arrangement robot prototype system. The multi-manipulator tooth-arrangement robot prototype system can automatically design and manufacture a set of complete denture that is suitable for a patient according to the jaw arch parameters. The experimental results verified the validity of kinematics model of the multi-manipulator tooth-arrangement robot and the feasibility of the manufacture strategy of complete denture fulfilled by multi-manipulator tooth-arrangement robot.

The effect of Piper betle and Psidium guajava extracts on the cell-surface hydrophobicity of selected early settlers of dental plaque.

Science.gov (United States)

Razak, Fathilah Abdul; Othman, Rofina Yasmin; Rahim, Zubaidah Haji Abd

2006-06-01

The adhesion of early settlers of dental plaque to the tooth surface has a role in the initiation of the development of dental plaque. The hydrophobic surface properties of the bacteria cell wall are indirectly responsible for the adhesion of the bacteria cell to the acquired pellicle on the tooth surfaces. In this study, the effect of aqueous extract of two plants (Psidium guajava and Piper betle) on the cell-surface hydro-phobicity of early settlers of dental plaque was determined in vitro. Hexadecane, a hydrocarbon was used to represent the hydrophobic surface of the teeth in the oral cavity. It was found that treatment of the early plaque settlers with 1 mg/ml extract of Psidium guajava reduced the cell-surface hydrophobicity of Strep. sanguinis, Strep. mitis and Actinomyces sp. by 54.1%, 49.9% and 40.6%, respectively. Treatment of these bacteria with the same concentration of Piper betle however, showed a comparatively lesser effect (< 10%). It was also observed that the anti-adhesive effect of the two extracts on the binding of the early plaque settlers to hexadecane is concentration dependent.

Outcome of Endodontically Treated Teeth Diagnosed With Cracked Tooth

Science.gov (United States)

2015-06-01

However, variable symptoms complicate the diagnosis (9). In a study of 32 patients presenting with diffuse longstanding orofacial pain eventually...883-92. 22)Byrnjulsen A, Fristad I, Grevstad T, Hals-Kvinnsland I. Incompletely fractured teeth associated with diffuse longstanding orofacial pain ...cracked tooth is highly associated with discomfort. Patients often describe a momentary, sudden, sharp, lancinating pain that results in continuous tooth

Technical Modifications of Tooth-borne Distraction Device for Anterior Maxillary Distraction in Cleft Patients

Directory of Open Access Journals (Sweden)

Dhivakar Selvaraj

2014-01-01

Full Text Available The tooth-borne distractor gained popularity for anterior maxillary distraction because of the effective treatment outcome, no need for external fixation, noninvasive, less chewing difficulty, social tolerance and economical. Tooth-borne distractor device needs modification in terms of maxillary deficiency, tooth position, retained deciduous tooth, and fistula. Hence, we recommend the following modifications in certain circumstances for the successful treatment outcome.

Recording and quantification of ultrasonic echolocation clicks from free-ranging toothed whales

DEFF Research Database (Denmark)

Madsen, Peter Teglberg; Wahlberg, Magnus

2007-01-01

Toothed whales produce short, ultrasonic clicks of high directionality and source level to probe their environment acoustically. This process, termed echolocation, is to a large part governed by the properties of the emitted clicks. Therefore derivation of click source parameters from free......-ranging animals is of increasing importance to understand both how toothed whales use echolocation in the wild and how they may be monitored acoustically. This paper addresses how source parameters can be derived from free-ranging toothed whales in the wild using calibrated multi-hydrophone arrays and digital...... of discrete versions of toothed whale clicks that are meaningful in a biosonar context....

Ion microprobe U-Pb dating of a dinosaur tooth

International Nuclear Information System (INIS)

Sano, Yuji; Terada, Kentaro; Ly, Chi V.; Park, Eun Ju

2006-01-01

Ion microprobe U-Pb dating of apatite is applied to a fossil tooth of a Allosaurid derived from the Hasandong Formation in the Gyeongsang basin, southeastern Korea. Twelve spots on a single fragment of the fossil dentine yield a Tera-Wasserburg concordia intercept age of 115±10 Ma (2σ, MSWD=0.59) on a 238 U/ 206 Pb- 207 Pb/ 206 Pb- 204 Pb/ 206 Pb diagram. The age provides a constraint on the depositional age of the fossil in its host Hassandong Formation as Early Aptian. The success of the ion microprobe dating depends on the heterogeneities of diagenetically incorporated U and Pb at the few hundred μm scale, the consequent variations in Pb isotopic compositions due to radioactive decay and the closed-system behavior of U and Pb. There are at least three end-members to explain the variations of minor chemical components such as FeO, SiO 2 and Al 2 O 3 , and trace elements as Th, U and rare earth elements (REE) in the sample by a simple mixing model. They are (1) very low minor and REE, very high common Pb with variable U abundances, (2) low common Pb, high minor, REE, and U abundances, and (3) low minor, common Pb, and U with intermediate REE abundances, even though groups (2) and (3) may consist of a larger group. Various contributions of the three (and/or two) end-members during diagenetic processes may cause the elemental fractionation of U and Pb in a fossil tooth. (author)

Dens evaginatus and dens invaginatus in a double tooth: A rare case report

Directory of Open Access Journals (Sweden)

Gaurav Sharma

2015-01-01

Full Text Available The presence of dens invaginatus (DI and dens evaginatus (DE on same tooth is a rare phenomenon. However, when these dental anomalies occur on a double tooth, it becomes an extremely rare phenomenon. The authors report a rare case of DI and DE on fused permanent maxillary central incisor with supernumerary tooth in a 40-year-old male. The present article also focuses on the differentiating fusion from gemination and also reviews preventive and management strategies for tooth with complex dental anatomy.

Evidence of Early Emergence of the Primary Dentition in a Northern Plains American Indian Population.

Science.gov (United States)

Dawson, D V; Blanchette, D R; Douglass, J M; Tinanoff, N; Kramer, K W O; Warren, J J; Phipps, K R; Starr, D E; Marshall, T A; Mabry, T R; Pagan-Rivera, K; Banas, J A; Drake, D R

2018-04-01

The purposes of this study were to describe primary tooth emergence in an American Indian (AI) population during the first 36 mo of life to compare 1) patterns of emergence between male and female children and 2) tooth emergence between these AI children and other U.S. ethnic groups. Data were derived from a birth cohort of 239 AI children from a Northern Plains tribe participating in a longitudinal study of early childhood caries, with examination data at target ages of 8, 12, 16, 22, 28, and 36 mo of age (±1 mo). Patterns of emergence in AI children were characterized and sex comparisons accomplished with interval-censored survival methodology. Numbers of erupted teeth in AI children at each age were compared via Kruskal-Wallis tests against those in children of the same age, as drawn from a cross-sectional study of dental caries patterns in Arizona; these comparisons were based on the dental examinations of 547 White non-Hispanic and 677 Hispanic children. Characterization of time to achievement of various milestones-including emergence of the anterior teeth, the first molars, and the complete primary dentition-provided no evidence of sex differences among AI children. AI children had significantly more teeth present at 8 mo (median, 3) than either White non-Hispanic ( P 0.05). These results provide evidence of earlier tooth emergence in AI children than in the other 2 ethnicities. Although the underlying etiology of the severity of early childhood caries in AI children is likely to be multifactorial, earlier tooth emergence may be a contributing factor. Knowledge Transfer Statement: The findings of this study have practical implications for practitioners providing childhood oral health care to ethnic groups with early tooth emergence. It may be important to provide parents with information on toothbrushing, dentist visits, and other practices supportive of good oral health as early as possible to protect their children's primary dentition.

Mesenchymal Wnt/β-catenin signaling limits tooth number.

Science.gov (United States)

Järvinen, Elina; Shimomura-Kuroki, Junko; Balic, Anamaria; Jussila, Maria; Thesleff, Irma

2018-02-21

Tooth agenesis is one of the predominant developmental anomalies in humans, usually affecting the permanent dentition generated by sequential tooth formation and, in most cases, caused by mutations perturbing epithelial Wnt/β-catenin signaling. In addition, loss-of-function mutations in the Wnt feedback inhibitor AXIN2 lead to human tooth agenesis. We have investigated the functions of Wnt/β-catenin signaling during sequential formation of molar teeth using mouse models. Continuous initiation of new teeth, which is observed after genetic activation of Wnt/β-catenin signaling in the oral epithelium, was accompanied by enhanced expression of Wnt antagonists and a downregulation of Wnt/β-catenin signaling in the dental mesenchyme. Genetic and pharmacological activation of mesenchymal Wnt/β-catenin signaling negatively regulated sequential tooth formation, an effect partly mediated by Bmp4. Runx2 , a gene whose loss-of-function mutations result in sequential formation of supernumerary teeth in the human cleidocranial dysplasia syndrome, suppressed the expression of Wnt inhibitors Axin2 and Drapc1 in dental mesenchyme. Our data indicate that increased mesenchymal Wnt signaling inhibits the sequential formation of teeth, and suggest that Axin2 / Runx2 antagonistic interactions modulate the level of mesenchymal Wnt/β-catenin signaling, underlying the contrasting dental phenotypes caused by human AXIN2 and RUNX2 mutations. © 2018. Published by The Company of Biologists Ltd.

On optimization of internal/external spur gears tooth bending strength

DEFF Research Database (Denmark)

Pedersen, Niels Leergaard

2014-01-01

level at the tooth root. As with most machine elements the design/geometry is defined in standards (ISO). The present work focuses on changing the tooth root design of both external and internal gears, in order to improve the stress concentration factor. The design changes made are compliant...

Single-Tooth Morse Taper Connection Implant Placed in Grafted Site of the Anterior Maxilla: Clinical and Radiographic Evaluation

Directory of Open Access Journals (Sweden)

Francesco Guido Mangano

2014-01-01

Full Text Available The aim of this study was to achieve aesthetically pleasing soft tissue contours in a severely compromised tooth in the anterior region of the maxilla. For a right-maxillary central incisor with localized advanced chronic periodontitis a tooth extraction followed by reconstructive procedures and delayed implant placement was proposed and accepted by the patient. Guided bone regeneration (GBR technique was employed, with a biphasic calcium-phosphate (BCP block graft placed in the extraction socket in conjunction with granules of the same material and a resorbable barrier membrane. After 6 months of healing, an implant was installed. The acrylic provisional restoration remained in situ for 3 months and then was substituted with the definitive crown. This ridge reconstruction technique enabled preserving both hard and soft tissues and counteracting vertical and horizontal bone resorption after tooth extraction and allowed for an ideal three-dimensional implant placement. Localized severe alveolar bone resorption of the anterior maxilla associated with chronic periodontal disease can be successfully treated by means of ridge reconstruction with GBR and delayed implant insertion; the placement of an early-loaded, Morse taper connection implant in the grafted site was effective to create an excellent clinical aesthetic result and to maintain it along time.

Risk factors for tooth wear lesions among patients attending the dental clinic of a Nigerian Teaching Hospital, Benin City: A pilot study

Directory of Open Access Journals (Sweden)

Okeigbemen A Sunny

2015-01-01

Full Text Available Aims: This study was to evaluate the risk factors associated with tooth wear lesions in patients attending a dental clinic. Context: Tooth wear lesions entail the loss of dental hard tissues in the absence of caries or trauma. They include abrasion, attrition, and erosion. The etiology is often related to habits leading to insidious symptoms with similar presentations in both community and hospital patients. Materials and Methods: This cross-sectional study involved patients attending the outpatient dental clinic of a Nigerian Teaching Hospital over a 3-month period. A semi-structured questionnaire was used to elicit information from the respondents. Results: A total of 152 respondents aged 17–80 years and above, comprising 86 males (56.6%, and 66 females (43.3% constituted the study population. The Binis were the most represented 34.2%, followed by the Esans 21.1%, while the least represented were the Yorubas (6.6%. The occupations represented in this study include civil servants (30.3%, unskilled workers (23.7%, and non-medical professionals (7.9%. Tooth wear lesions were present in 55.3% of the respondents. Attrition accounted for 29.6%, Abrasion (11.8%, combination of attrition and abrasion (4.6%, and abfraction (2.0%. There was a statistically significant association between tooth wear lesions and age, occupation, sensitivity or pain, tooth cleaning aids, toothbrush texture brushing technique, intake of carbonated beverages, and method of intake. Conclusion: Tooth wear lesions such as attrition and abrasion were prevalent among the respondents in this hospital setting and, therefore, represent an important group of dental problems among this population. It is, therefore, important to direct the appropriate oral health awareness program for the prevention, early detection, and management of these conditions.

Incisal tooth wear and self-reported TMD pain in children and adolescents.

Science.gov (United States)

Hirsch, Christian; John, Mike T; Lobbezoo, Frank; Setz, Juergen M; Schaller, Hans-Guenter

2004-01-01

Incisal tooth wear may be a sign of long-term bruxing behavior. Bruxism is purported to be a risk factor for temporomandibular disorders (TMD). The aim of this population-based cross-sectional study was to determine if anterior tooth wear is associated with the self-report of TMD pain in children and adolescents. In a population sample of 1,011 children and adolescents (mean age 13.1 years, range 10 to 18 years; female 52%; response rate 85%), TMD cases were defined as subjects reporting pain in the face, jaw muscles, and temporomandibular joint during the last month according to RDC/TMD. All other subjects were considered controls. Incisal tooth wear was assessed in the clinical examination using a 0 to 2 scale (no wear, enamel wear, dentin wear) for every anterior permanent tooth. The mean wear score for the individuals was categorized into 0, 0.01 to 0.20, 0.21 to 0.40, and 0.41+. A multiple logistic regression analysis, controlling for the effects of age and gender, analyzed the association between the categorized summary wear score and TMD. Specifically, the hypothesis of a trend between higher tooth wear scores and higher risk of TMD was tested. An odds ratio of 1.1 indicated, after adjusting for gender and age, no statistically significantly higher risk of TMD pain with higher tooth wear scores. Incisal tooth wear was not associated with self-reported TMD pain in 10- to 18-year-old subjects.

Unique case of a geminated supernumerary tooth with trifid crown

International Nuclear Information System (INIS)

Ather, Amber; Ather, Hunaiza; Sheth, Sanket Milan; Muliya, Vidya Saraswathi

2012-01-01

Gemination, a relatively uncommon dental anomaly, is characterized by its peculiar representation as a tooth with a bifid crown and a common root and root canal. It usually occurs in primary dentition. To come across gemination in a supernumerary tooth is a rare phenomenon. The purpose of this paper is to present a unique case of hyperdontia wherein gemination in an impacted supernumerary tooth resulted in a trifid crown unlike the usual bifid crown. The role of conventional radiographs as well as computed tomography, to accurately determine the morphology and spatial location, and to arrive at a diagnosis, is also emphasized in this paper.

A theropod tooth from the Late Triassic of southern Africa

Indian Academy of Sciences (India)

An isolated, large recurved and finely serrated tooth found associated with the prosauropod Euskelosaurus from the Late Triassic part of the Elliot Formation is described here. It is compared to the Triassic thecodonts and carnivorous dinosaurs and its possible affinity is discussed. The tooth possibly belongs to a basal ...

Assessment of the progression of tooth wear on dental casts

NARCIS (Netherlands)

Vervoorn-Vis, G.M.G.J.; Wetselaar, P.; Koutris, M.; Visscher, C.M.; Evälahti, M.; Ahlberg, J.; Lobbezoo, F.

2015-01-01

Many methods are available for the grading of tooth wear, but their ability to assess the progression of wear over time has not been studied frequently. The aim was to assess whether the occlusal/incisal grading scale of the Tooth Wear Evaluation System (TWES) was sensitive enough for the detection

Tooth apatite as a bone substitute: an experimental study and clinical applications

International Nuclear Information System (INIS)

Eun-Seok Kim; Pill-Hoon Choung

1999-01-01

The purpose of this study is to evaluate the usefulness of calcined teeth powder as biological apatite. The animal experiment was performed in 36 rabbits aging 6 weeks and weighing 1.6 kg. In experimental group, tooth apatite powder was implanted to 10 mm bony defects in diameter made on the cranial bone of the rabbits. As control groups, synthetic porous hydroxyapatite and resorbable type calcium carbonate were implanted to the defects of same size. Each group was sacrificed in 1, 2, 4, 6, 8, 12 weeks after the surgery. Specimens were prepared for decalcified samples and observed by a light microscope. And we also performed quantitative analysis of new bone formation through image analysis using computer. In clinical applications, we used tooth apatite alone or mixed with decalcified freeze-dried bone for reconstruction of bony defects in 15 patients undergone enucleation of cyst or ameloblastoma. The obtained results were as follows; 1) The powder of the calcined teeth was called as 'tooth apatite' and it seemed to have biocompatibility in rabbits and human. 2) In group of tooth apatite, after 4 weeks of operation, new bone directly bonded to the particles was observed. And in 12 weeks of it, new bone occupied most of the bony defects. In 6 weeks, resorption of the tooth apatite particles was observed. Thus the tooth apatite was regarded as one of resorbable apatite. 3) The group of tooth apatite showed new bone formation similar to the group of porous hydroxyapatite, but they were inferior to the group of resorbable calcium carbonate. 4) In clinical application, tooth apatite had biocompatibility and new bone formation was observed without any complication except for 1 case. So we think it is a useful bone substitute with osteoconductivity

A model for predicting wear rates in tooth enamel.

Science.gov (United States)

Borrero-Lopez, Oscar; Pajares, Antonia; Constantino, Paul J; Lawn, Brian R

2014-09-01

It is hypothesized that wear of enamel is sensitive to the presence of sharp particulates in oral fluids and masticated foods. To this end, a generic model for predicting wear rates in brittle materials is developed, with specific application to tooth enamel. Wear is assumed to result from an accumulation of elastic-plastic micro-asperity events. Integration over all such events leads to a wear rate relation analogous to Archard׳s law, but with allowance for variation in asperity angle and compliance. The coefficient K in this relation quantifies the wear severity, with an arbitrary distinction between 'mild' wear (low K) and 'severe' wear (high K). Data from the literature and in-house wear-test experiments on enamel specimens in lubricant media (water, oil) with and without sharp third-body particulates (silica, diamond) are used to validate the model. Measured wear rates can vary over several orders of magnitude, depending on contact asperity conditions, accounting for the occurrence of severe enamel removal in some human patients (bruxing). Expressions for the depth removal rate and number of cycles to wear down occlusal enamel in the low-crowned tooth forms of some mammals are derived, with tooth size and enamel thickness as key variables. The role of 'hard' versus 'soft' food diets in determining evolutionary paths in different hominin species is briefly considered. A feature of the model is that it does not require recourse to specific material removal mechanisms, although processes involving microplastic extrusion and microcrack coalescence are indicated. Published by Elsevier Ltd.

Experimental tooth clenching. A model for studying mechanisms of muscle pain.

Science.gov (United States)

Dawson, Andreas

2013-01-01

The overall goal of this thesis was to broaden knowledge of pain mechanisms in myofascial temporomandibular disorders (M-TMD). The specific aims were to: Develop a quality assessment tool for experimental bruxism studies (study I). Investigate proprioceptive allodynia after experimental tooth clenching exercises (study II). Evaluate the release of serotonin (5-HT), glutamate, pyruvate, and lactate in healthy subjects (study III) and in patients with M-TMD (study IV), after experimental tooth clenching exercises. In (I), tool development comprised 5 steps: (i) preliminary decisions, (ii) item generation, (iii) face-validity assessment, (iv) reliability and discriminative validity testing, and (v) instrument refinement. After preliminary decisions and a literature review, a list of 52 items to be considered for inclusion in the tool was generated. Eleven experts were invited to participate on the Delphi panel, of which 10 agreed. After four Delphi rounds, 8 items remained and were included in the Quality Assessment Tool for Experimental Bruxism Studies (Qu-ATEBS). Inter-observer reliability was acceptable (k = 0.77), and discriminative validity high (phi coefficient 0.79; P < 0.01). During refinement, 1 item was removed; the final tool comprised 7 items. In (II), 16 healthy females participated in three 60-min sessions, each with 24- and 48-h follow-ups. Participants were randomly assigned to a repetitive experimental tooth clenching task with a clenching level of 10%, 20%, or 40% of maximal voluntary clenching force (MVCF). Pain intensity, fatigue, perceived intensity of vibration (PIV), perceived discomfort (PD), and pressure pain threshold (PPT) were measured throughout. A significant increase in pain intensity and fatigue but not in PD was observed over time. A significant increase in PIV was only observed at 40 min, and PPT decreased significantly over time at 50 and 60 min compared to baseline. In (III), 30 healthy subjects (16 females, and 14 males

Effect of Orthodontic Tooth Movement on Salivary Aspartate Aminotransferase Activity

Directory of Open Access Journals (Sweden)

Steiven Adhitya

2013-07-01

Full Text Available 72 1024x768 Aspartate aminotransferase is one of biological indicator in gingival crevicular fluid (CGF. Force orthodontic application could increase activity of aspartate aminotransferase in CGF. However, the increase activity of aspartate aminotransferase in saliva due to orthodontic force and its correlation between aspartate aminotransferase activity and tooth movement remains unclear. Objectives: To evaluate application orthodontic force on the aspartate aminotransferase activity in saliva based on the duration of force and finding correlation between tooth movement and aspartate aminotransferase activity. Methods: Twenty saliva samples collected before extraction of first premolar, at the time of force application for canine retraction and after force application. The canines retraction used 100 grams of interrupted force (module chain for thirty days. The collection of saliva and the measurement of tooth movement were carried out 1 day, 7 days, 14 days, 21 days, and 28 days after force application. The measurement of aspartate aminotransferase activity in saliva was done using spectrophotometer. Results: Application of orthodontic force influences the salivary aspartate aminotransferase activity (F=25.290, p=0.000. Furthermore, tooth movement correlated with aspartate aminotransferase activity (F=0.429, p=0.000. Conclusion: Aspartate aminotransferase activity could be used as tooth movement indicator that related to the duration of force application.DOI : 10.14693/jdi.v20i1.128

A review of heat transfer in human tooth--experimental characterization and mathematical modeling.

Science.gov (United States)

Lin, Min; Xu, Feng; Lu, Tian Jian; Bai, Bo Feng

2010-06-01

With rapid advances in modern dentistry, high-energy output instruments (e.g., dental lasers and light polymerizing units) are increasingly employed in dental surgery for applications such as laser assisted tooth ablation, bleaching, hypersensitivity treatment and polymerization of dental restorative materials. Extreme high temperature occurs within the tooth during these treatments, which may induce tooth thermal pain (TTP) sensation. Despite the wide application of these dental treatments, the underlying mechanisms are far from clear. Therefore, there is an urgent need to better understand heat transfer (HT) process in tooth, thermally induced damage of tooth, and the corresponding TTP. This will enhance the design and optimization of clinical treatment strategies. This paper presents the state-of-the-art of the current understanding on HT in tooth, with both experimental study and mathematical modeling reviewed. Limitations of the current experimental and mathematical methodologies are discussed and potential solutions are suggested. Interpretation of TTP in terms of thermally stimulated dentinal fluid flow is also discussed. Copyright (c) 2010 Academy of Dental Materials. All rights reserved.

Conversion from tooth enamel dose to organ doses for electron spin resonance dosimetry

International Nuclear Information System (INIS)

Takahashi, Fumiaki; Yamaguchi, Yasuhiro; Saito, Kimiaki; Hamada, Tatsuji

2002-01-01

Conversion from tooth enamel dose to organ doses was analyzed to establish a method of retrospective individual dose assessment against external photon exposure by electron spin resonance (ESR) dosimetry. Dose to tooth enamel was obtained by Monte Carlo calculations using a modified MIRD-type phantom with a teeth part. The calculated tooth enamel doses were verified by measurements with thermo-luminescence dosimeters inserted in a physical head phantom. Energy and angular dependences of tooth enamel dose were compared with those of other organ doses. Additional Monte Carlo calculations were performed to study the effect of human model on the tooth enamel dose with a voxel-type phantom, which was based on computed tomography images of the physical phantom. The data derived with the modified MIRD-type phantom were applied to convert from tooth enamel dose to organ doses against external photon exposure in a hypothesized field, where scattered radiation was taken into account. The results indicated that energy distribution of photons incident to a human body is required to evaluate precisely an individual dose based on ESR dosimetry for teeth. (author)

Clinical management of a fused upper premolar with supernumerary tooth: a case report

Directory of Open Access Journals (Sweden)

Kyu-Min Cho

2014-11-01

Full Text Available n dentistry, the term 'fusion' is used to describe a developmental disorder of dental hard tissues. In the permanent dentition, fusion of a normal tooth and a supernumerary tooth usually involves the incisors or canines. However, a few cases of fusion involving premolars have also been reported to date. We present a rare case in which fusion of the maxillary left second premolar and a supernumerary tooth in a 13-year-old girl was diagnosed using cone beam computed tomography (CBCT, Alphard-3030, Asahi Roentgen Ind. Co., Ltd.. The tooth was bicuspidized after routine nonsurgical root canal treatment, and the separated teeth underwent appropriate restoration procedures. The second premolar and supernumerary tooth remained asymptomatic without any signs of inflammation after a follow-up period of 9 years. Identification of anatomical anomalies is important for treatment in cases involving fusion with supernumerary tooth, and therefore the microscopic examinations and CBCT are essential for the diagnosis. Fused teeth can be effectively managed by the comprehensive treatment which includes both endodontic and periodontal procedures.

Tooth damage in captive orcas (Orcinus orca).

Science.gov (United States)

Jett, John; Visser, Ingrid N; Ventre, Jeffrey; Waltz, Jordan; Loch, Carolina

2017-12-01

Tooth damage as a result of oral stereotypies is evident in captive orca, yet little research on the topic exists. This study examines the associations between dental pathology, sex, facility, duration of captivity and other factors in captive orca. We evaluated mandibular and maxillary teeth from dental images of 29 captive orca owned by a US-based theme park. Each tooth was scored for coronal wear, wear at or below gum line and bore holes. Fractured and missing teeth were also noted. Summary statistics described the distribution and severity of pathologies; inferential statistics examined how pathologies differed between sexes, between wild-captured and captive-born orcas and between captive orca at four facilities. We also evaluated how dental pathology and duration of captivity were related. Approximately 24% of whales exhibited "major" to "extreme" mandibular coronal tooth wear, with coronal wear and wear at or below gum line highly correlated. More than 60% of mandibular teeth 2 and 3 exhibited fractures. Bore holes were observed primarily among anterior mandibular teeth, with more than 61% of teeth 2 and 3 bearing evidence of having been drilled. Four of five orca with the highest age-adjusted tooth pathology indices were captive-born. Various dental pathologies were observed across all whales, with pathologies beginning at a young age. Oral stereotypies exhibited by captive orca contributed to the observed dental damage. By making dental and health records of captive whales publicly available, the theme park industry is uniquely positioned to provide further insight into dental pathology and resultant health consequences in captive orca. Copyright © 2017 Elsevier Ltd. All rights reserved.

Phenotypic spectrum of dynamin 2 mutations in Charcot-Marie-Tooth neuropathy

NARCIS (Netherlands)

Claeys, Kristl G.; Züchner, Stephan; Kennerson, Marina; Berciano, José; Garcia, Antonio; Verhoeven, Kristien; Storey, Elsdon; Merory, John R.; Bienfait, Henriette M. E.; Lammens, Martin; Nelis, Eva; Baets, Jonathan; de Vriendt, Els; Berneman, Zwi N.; de Veuster, Ilse; Vance, Jefferey M.; Nicholson, Garth; Timmerman, Vincent; de Jonghe, Peter

2009-01-01

Dominant intermediate Charcot-Marie-Tooth neuropathy type B is caused by mutations in dynamin 2. We studied the clinical, haematological, electrophysiological and sural nerve biopsy findings in 34 patients belonging to six unrelated dominant intermediate Charcot-Marie-Tooth neuropathy type B

Relationship and inter observer agreement of tooth and face forms in a Saudi subpopulation.

Science.gov (United States)

Habib, Syed Rashid; Shiddi, Ibraheem Al; Al-Sufyani, Mohammed D; Althobaiti, Fahad A

2015-04-01

To determine the relationship of tooth form with the face form by different observers and further investigate the inter observer agreement on tooth forms, face forms, their relationship among male Saudis. A comparative cross-sectional study. Department of Prosthodontics, College of Dentistry, King Saud University, Riyadh, KSA, from February till August 2013. Ninety four male participants aged 18 - 35 years were randomly recruited for the study. Full-face and anterior teeth (intraoral) digital photographs in the frontal plane were recorded. The outline tracings of the face and the tooth were obtained using Autocad (version 2010) software. The outline of the tooth was enlarged proportionately, without altering the length to width ratio to fit the face outline. The outlines were then evaluated visually by 6 prosthodontists and results were tabulated. The most common type of face form (49.65%) and tooth form (56.38%) was square tapering. Using the visual method, a good relationship (31.41%), moderate relationship (35.31%), weak relationship (19.68%) and no relationship (13.65%) between the tooth form and face form was found by the observers. Overall kappa for inter observer agreement on face form, tooth form and their relationship was 0.24, 0.17 and 0.26 respectively. The kappa values showed a fair agreement between the observers. The study results indicated that there was no highly defined relationship between the tooth form and face form in the studied Saudi subpopulation. A fair agreement was found between the observers for classifying the tooth forms, face froms and their relationship.

ECR-MAPK regulation in liver early development.

Science.gov (United States)

Zhao, Xiu-Ju; Zhuo, Hexian

2014-01-01

Early growth is connected to a key link between embryonic development and aging. In this paper, liver gene expression profiles were assayed at postnatal day 22 and week 16 of age. Meanwhile another independent animal experiment and cell culture were carried out for validation. Significance analysis of microarrays, qPCR verification, drug induction/inhibition assays, and metabonomics indicated that alpha-2u globulin (extracellular region)-socs2 (-SH2-containing signals/receptor tyrosine kinases)-ppp2r2a/pik3c3 (MAPK signaling)-hsd3b5/cav2 (metabolism/organization) plays a vital role in early development. Taken together, early development of male rats is ECR and MAPK-mediated coordination of cancer-like growth and negative regulations. Our data represent the first comprehensive description of early individual development, which could be a valuable basis for understanding the functioning of the gene interaction network of infant development.

Surgical treatments of the impacted canine tooth in young dogs

International Nuclear Information System (INIS)

Amimoto, A.; Iwamoto, S.; Hachimura, H.; Sasaki, K.; Taura, Y.; Nakama, S.; Yamanouchi, T.

1993-01-01

Surgical treatments of the impacted canine tooth were carried out in 8 young dogs, and the results were successful in 12 out of 14 cases (85.7%). The treatments consisting of surgical correction by immediate tipping movement, fenestration of the gingiva, and removal of the impacted tooth, were applied to 14 cases radiographically showing the immature tooth root and no abnormalities in the tooth root or alveolar bone. Impacted teeth were seen in 8 regions of the maxilla and 6 regions of the mandible. Mesioversion was seen in almost all maxillary impacted teeth, while linguoversion or lingual mesioversion in all mandibular cases. Surgical correction was carried out by immediate tipping movement after removal of the retained deciduous canine with or without resection of the alveolar bone. Fixation of the moved teeth was done using a wedge made from the deciduous canine root, which was driven into the vacant alveolar cavity after moving. An additional fixation using a steel wire and/or self-curing resin was done, if necessary

Enamel subsurface damage due to tooth preparation with diamonds.

Science.gov (United States)

Xu, H H; Kelly, J R; Jahanmir, S; Thompson, V P; Rekow, E D

1997-10-01

In clinical tooth preparation with diamond burs, sharp diamond particles indent and scratch the enamel, causing material removal. Such operations may produce subsurface damage in enamel. However, little information is available on the mechanisms and the extent of subsurface damage in enamel produced during clinical tooth preparation. The aim of this study, therefore, was to investigate the mechanisms of subsurface damage produced in enamel during tooth preparation by means of diamond burs, and to examine the dependence of such damage on enamel rod orientation, diamond particle size, and removal rate. Subsurface damage was evaluated by a bonded-interface technique. Tooth preparation was carried out on two enamel rod orientations, with four clinical diamond burs (coarse, medium, fine, and superfine) used in a dental handpiece. The results of this study showed that subsurface damage in enamel took the form of median-type cracks and distributed microcracks, extending preferentially along the boundaries between the enamel rods. Microcracks within individual enamel rods were also observed. The median-type cracks were significantly longer in the direction parallel to the enamel rods than perpendicular to the rods. Preparation with the coarse diamond bur produced cracks as deep as 84 +/- 30 microns in enamel. Finishing with fine diamond burs was effective in crack removal. The crack lengths in enamel were not significantly different when the removal rate was varied. Based on these results, it is concluded that subsurface damage in enamel induced by tooth preparation takes the form of median-type cracks as well as inter- and intra-rod microcracks, and that the lengths of these cracks are sensitive to diamond particle size and enamel rod orientation, but insensitive to removal rate.

AUTOGENOUS TOOTH TRANSPLANTATION IN ADULT ...

African Journals Online (AJOL)

drclement

ABSTRACT. A case of autotransplantation of a tooth in a 26 year old female African cleft palate patient is reported. This case report emphasizes the possibility and success of autotransplantation in our centre, it also emphasizes that transplantation is only technique sensitive but less equipment sensitive. It further stresses.

Reasons for tooth mortality as perceived by dental professionals in ...

African Journals Online (AJOL)

Conclusion: The results of the present study suggest that among the patients attending dental clinics and hospitals in Udaipur city, dental caries and periodontal disease was found to be the two major causes of tooth mortality. This is probably the first study to report on the trends in tooth loss in general practice in Udaipur ...

In phantom dosimetric response of tooth enamel to neutrons

International Nuclear Information System (INIS)

Fattibene, P.; Angelone, M.; Pillon, M.; De Coste, V.

2004-01-01

Electron Paramagnetic Resonance dosimetry based on tooth enamel has one important application in dose reconstruction of nuclear plant workers, where the contribution of neutrons to individual dose is often important. Evaluation of tooth enamel response to neutrons is thus an important goal. A few experimental data at thermal and fast neutron energies are available. A first evaluation of the tooth enamel relative response to 60 Co in monoenergetic neutron flux of 2.8 and of 14 MeV, published elsewhere, has provided results apparently non-consistent with the results obtained at lower and higher energies. A comparison of those results in the 2.8 and 14 MeV beams with those available in the literature for other beams is reported and possible reasons for incongruities are discussed. Dose conversion factors of enamel to the water and air are also calculated and reported. (authors)

Sodium hyaluronate accelerates the healing process in tooth sockets of rats.

Science.gov (United States)

Mendes, Renato M; Silva, Gerluza A B; Lima, Miguel F; Calliari, Marcelo V; Almeida, Alvair P; Alves, José B; Ferreira, Anderson J

2008-12-01

In this study we evaluated the effects of sodium hyaluronate (HY) in the healing process of tooth sockets of rats. Immediately after the extraction of the upper first molars of male Holtzman rats, right sockets were treated with 1% HY gel (approximately 0.1 ml), while left sockets were used as control (blood clot). The animals were sacrificed at 2, 7, and 21 days after tooth extraction and upper maxillaries processed for histological and morphometric analysis of the apical and medium thirds of the sockets. Carbopol, an inert gel, was used to evaluate the mechanical effect of gel injection into sockets. Expression of bone morphogenetic protein-2 (BMP-2) and osteopontin (OPN) was determined by immunohistochemistry at 1, 2, 3, 4, 5, and 7 days after tooth extraction. Histological analysis showed that HY treatment induced earlier trabecular bone deposition resulting in a bone matrix more organized at 7 and 21 days after tooth extraction. Also, HY elicited significant increase in the amount of bone trabeculaes at 7 and 21 days after tooth extraction (percentage of trabecular bone area at 7 days: 13.21+/-4.66% vs. 2.58+/-1.36% in the apical third of control sockets) and in the vessels counting at 7 days. Conversely, the number of cell nuclei was decreased in HY-treated sockets. Additionally, expression of BMP-2 and OPN was enhanced in HY-treated sockets compared with control sockets. These findings suggest that HY accelerates the healing process in tooth sockets of rats stimulating the expression of osteogenic proteins.

Frequency and risk indicators of tooth decay among pregnant women in France: a cross-sectional analysis.

Directory of Open Access Journals (Sweden)

Jean-Noel Vergnes

Full Text Available INTRODUCTION: Little is known on the prevalence of tooth decay among pregnant women. Better knowledge of tooth decay risk indicators during pregnancy could help to develop follow-up protocols for women at risk, along with better prevention strategies. The aim of this study was to assess the frequency of tooth decay and the number of decayed teeth per woman in a large sample of pregnant women in France, and to study associated risk indicators. METHODS: A secondary cross-sectional analysis of data from a French multicentre case-control study was performed. The sample was composed of 1094 at-term women of six maternity units. A dental examination was carried out within 2 to 4 days post-partum. Socio-demographic and behavioural characteristics were obtained through a standardised interview with the women. Medical characteristics were obtained from the women's medical records. Risk indicators associated with tooth decay were identified using a negative binomial hurdle model. RESULTS: 51.6% of the women had tooth decay. The mean number of decayed teeth among women having at least one was 3.1 (s.d. = 2.8. Having tooth decay was statistically associated with lower age (aOR = 1.58, 95%CI [1.03,2.45], lower educational level (aOR = 1.53, 95%CI [1.06,2.23] and dental plaque (aOR = 1.75, 95%CI [1.27,2.41]. The number of decayed teeth was associated with the same risk indicators and with non-French nationality and inadequate prenatal care. DISCUSSION: The frequency of tooth decay and the number of decayed teeth among pregnant women were high. Oral health promotion programmes must continue to inform women and care providers about the importance of dental care before, during and after pregnancy. Future research should also assess the effectiveness of public policies related to oral health in target populations of pregnant women facing challenging social or economic situations.

Estimation of Tooth Size Discrepancies among Different Malocclusion Groups

OpenAIRE

Hasija, Narender; Bala, Madhu; Goyal, Virender

2014-01-01

ABSTRACT Regards and Tribute: Late Dr Narender Hasija was a mentor and visionary in the light of knowledge and experience. We pay our regards with deepest gratitude to the departed soul to rest in peace. Bolton’s ratios help in estimating overbite, overjet relationships, the effects of contemplated extractions on posterior occlusion, incisor relationships and identification of occlusal misfit produced by tooth size discrepancies. Aim: To determine any difference in tooth size discrepancy in a...

Interactive effects of periodontitis and orthodontic tooth movement on dental root resorption, tooth movement velocity and alveolar bone loss in a rat model.

Science.gov (United States)

Kirschneck, Christian; Fanghänel, Jochen; Wahlmann, Ulrich; Wolf, Michael; Roldán, J Camilo; Proff, Peter

2017-03-01

Many adult orthodontic patients suffer from chronic periodontitis with recurrent episodes of active periodontal inflammation. As their number is steadily increasing, orthodontists are more and more frequently challenged by respective treatment considerations. However, little is currently known regarding interactive effects on undesired dental root resorption (DRR), tooth movement velocity, periodontal bone loss and the underlying cellular and tissue reactions. A total of 63 male Fischer344 rats were used in three consecutive experiments employing 21 animals each (A/B/C), randomly assigned to 3 experimental groups (n=7, 1/2/3), respectively: (A) CBCT; (B) histology/serology; (C) RT-qPCR-(1) control; (2) orthodontic tooth movement (OTM) of the first/second upper left molars (NiTi coil spring, 0.25N); (3) OTM with experimentally induced periodontitis (cervical silk ligature). After 14days of OTM, we quantified blood leukocyte level, DRR, osteoclast activity and relative gene expression of inflammatory and osteoclast marker genes within the dental-periodontal tissue as well as tooth movement velocity and periodontal bone loss after 14 and 28 days. The experimentally induced periodontal bone loss was significantly increased by concurrent orthodontic force application. Periodontal inflammation during OTM on the other hand significantly augmented the extent of DRR, relative expression of inflammatory/osteoclast marker genes, blood leukocyte level and periodontal osteoclast activity. In addition, contrary to previous studies, we observed a significant increase in tooth movement velocity. Although accelerated tooth movement would be favourable for orthodontic treatment, our results suggest that orthodontic interventions should only be performed after successful systematic periodontal therapy and paused in case of recurrent active inflammation. Copyright © 2016 Elsevier GmbH. All rights reserved.

ECR-MAPK Regulation in Liver Early Development

Directory of Open Access Journals (Sweden)

Xiu-Ju Zhao

2014-01-01

Full Text Available Early growth is connected to a key link between embryonic development and aging. In this paper, liver gene expression profiles were assayed at postnatal day 22 and week 16 of age. Meanwhile another independent animal experiment and cell culture were carried out for validation. Significance analysis of microarrays, qPCR verification, drug induction/inhibition assays, and metabonomics indicated that alpha-2u globulin (extracellular region-socs2 (-SH2-containing signals/receptor tyrosine kinases-ppp2r2a/pik3c3 (MAPK signaling-hsd3b5/cav2 (metabolism/organization plays a vital role in early development. Taken together, early development of male rats is ECR and MAPK-mediated coordination of cancer-like growth and negative regulations. Our data represent the first comprehensive description of early individual development, which could be a valuable basis for understanding the functioning of the gene interaction network of infant development.

Ancient DNA: Saber-Toothed Cats Are the Same Beasts After All.

Science.gov (United States)

Meachen, Julie A

2017-11-06

Ancient DNA from the saber-toothed cat Homotherium reveals that the late Pleistocene species from Europe and North America were the same. Homotherium turns out to be only distantly related to the well-known saber-toothed Smilodon. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Tooth and Skin Colour Interrelationship across the Different Ethnic Groups.

Science.gov (United States)

Haralur, Satheesh B; Dibas, Ahmed Mohammed; Almelhi, Nabil Abdullah; Al-Qahtani, Dhafer Ali

2014-01-01

Objectives. The purpose of the study was to investigate the relation between skin and tooth colour parameters in various ethnic groups. Materials and Methods. Saudi Arabian, Indian, African, and East Asian ethnic groups of 75 each were included in the study. The tooth colour was determined by spectrophotometer in CIELAB parameters. The skin colour was measured at earlobe, forehead, and malar locations by clinical skin photography. The data was statistically analysed by one-way ANOVA and correlation tests. Results. The "L" vale for the Saudi Arabian group had a strong correlation at earlobe location (r = 0.275), while correlation was found at forehead (r = 0.271) and malar region (r = 0.261) with Indian ethnic group. A strong negative correlation was observed in African ethnic group at all three locations for "L" parameter. The redness value "a" is found to have strong negative linear correlation between the earlobe and tooth for Saudi Arabian (r = -0.240) and Indian ethnic groups (r = -0.268). The "b" showed no correlation with skin location in all groups except positive correlation in African ethnic groups. Conclusions. The strong correlation was found between the skin and tooth colour parameters; hence the skin colour can be used as a guide for artificial tooth selection in edentulous patients.

Dosimetric response evaluation of tooth enamel for accelerator-based neutron radiation

International Nuclear Information System (INIS)

Khan, R.F.H.; Rink, W.J.; Boreham, D.R.

2003-01-01

To study the neutron response of human tooth enamel, a number of experiments with an accelerator-based neutron source have been designed. The neutron beam was produced with the low gamma yield, 7 Li(p,n) 7 Be type thick target, using the 3 MV McMaster K.N. Van de Graaff accelerator. The dosimetry was done using a pre-calibrated snoopy type neutron dosimeter. Neutron irradiation induces a dosimetric signal in the tooth enamel at the same defect site as gamma produced damage with the same g-values (g parallel =1.9973, width 0.4 mT g perpendicular =2.002, width 0.3 mT). The dosimetric signal grows linearly with neutron dose from 6-35 Gy tissue dose. Dosimetric response in two different grain sizes (300-500 μm, and grains <4 mm) has shown increased dosimetric amplitude in the larger grains. Dose build up effect on tooth inside the mouth due to cheek was simulated by placing a 4 mm thick paraffin wax layer between the beam and tooth, but had little effect. These results show that for mean neutron energy of 280 keV, the relative neutron response of the human tooth enamel ranges from 8% to 12% of the equivalent gamma ray response

Methodic of the gamma-rays absorbed dose measurements on tooth enamel

International Nuclear Information System (INIS)

Linev, S.V.; Muravskij, V.A.; Mashevskij, A.A.; Ugolev, I.I.

1997-01-01

The analysis of the metrological aspects of the tooth enamel ESR dosimetry has been done. The sample preparation and measurement methods have been elaborated. The methods have passed metrological certification. The methods include tabletting of the mixture of tooth enamel powder and MnO paramagnetic centres concentration additional standard, two loops of additional irradiation of samples by 1 Gy dose and ESR-spectra measurements, calculation of absorbed dose by maximum likelihood algorithm. The algorithm of dose calculation uses enamel spectrum model with axial anisotropic spin-Hamiltonian based on 126 spectra of enamel samples. The algorithm takes into account spectra of the empty cavity, the tube for a sample, the glue and MnO standard. Certificated ESR-station is based on the ESR-analyser PS-100X. ESR-station provides tooth enamel absorbed dose measurements from 0.05 to 0.25 Gy with error 35%, and from 0.25 to 3 Gy with error 20%. The set of tooth enamel absorbed dose standard samples has been created and certificated for the purposes of ESR-station testing and certification. The set consists of 12 tabletted samples of tooth enamel irradiated by doses from 0.05 to 4 Gy. (authors). 7 refs., 1 tab., 2 figs

Retrospective dosimetry assessment using the 380 deg. C thermoluminescence peak of tooth enamel

Energy Technology Data Exchange (ETDEWEB)

Secu, C.E. [National Institute for Materials Physics, PO Box MG-7, 77125 Bucharest-Magurele (Romania); Cherestes, M. [Dozimed Ltd., Dosimetry Laboratory, 77125 Bucharest-Magurele (Romania); Secu, M., E-mail: msecu@infim.ro [National Institute for Materials Physics, PO Box MG-7, 77125 Bucharest-Magurele (Romania); Cherestes, C.; Paraschiva, V. [Dozimed Ltd., Dosimetry Laboratory, 77125 Bucharest-Magurele (Romania); Barca, C. [Faculty of Physics, University of Bucharest, 77125 Bucharest-Magurele (Romania)

2011-10-15

The thermoluminescence (TL) response to gamma-ray irradiation of tooth enamel is reported. The tooth enamel was separated from dentine by using mechanical and physico-chemical procedures followed by grinding (grain size {approx}100 {mu}m) and etching. The TL was attributed to the recombination of CO{sub 2}{sup -} radicals incorporated into or attached to the surface of hydroxyapatite crystals. The growth of the {approx}380 deg. C TL peak with absorbed dose was examined with irradiated tooth enamel samples and reconstructed doses evaluated for tooth enamel samples from four human subjects. - Highlights: > Thermoluminescence response after gamma-ray irradiation of tooth enamel was investigated. > Thermoluminescence was attributed to the recombination of CO{sub 2}{sup -} radicals. > CO{sub 2}{sup -} radicals are produced inside or at the surface of hydroxyapatite crystals. > From the growth of the 380C peak reconstructed doses have been evaluated.

Enamel alteration following tooth bleaching and remineralization.

Science.gov (United States)

Coceska, Emilija; Gjorgievska, Elizabeta; Coleman, Nichola J; Gabric, Dragana; Slipper, Ian J; Stevanovic, Marija; Nicholson, John W

2016-06-01

The purpose of this study was to compare the effects of professional tooth whitening agents containing highly concentrated hydrogen peroxide (with and without laser activation), on the enamel surface; and the potential of four different toothpastes to remineralize any alterations. The study was performed on 50 human molars, divided in two groups: treated with Opalescence(®) Boost and Mirawhite(®) Laser Bleaching. Furthermore, each group was divided into five subgroups, a control one and 4 subgroups remineralized with: Mirasensitive(®) hap+, Mirawhite(®) Gelleѐ, GC Tooth Mousse™ and Mirafluor(®) C. The samples were analysed by SEM/3D-SEM-micrographs, SEM/EDX-qualitative analysis and SEM/EDX-semiquantitative analysis. The microphotographs show that both types of bleaching cause alterations: emphasized perikymata, erosions, loss of interprizmatic substance; the laser treatment is more aggressive and loss of integrity of the enamel is determined by shearing off the enamel rods. In all samples undergoing remineralization deposits were observed, those of toothpastes based on calcium phosphate technologies seem to merge with each other and cover almost the entire surface of the enamel. Loss of integrity and minerals were detected only in the line-scans of the sample remineralized with GC Tooth Mousse™. The semiquantitative EDX analysis of individual elements in the surface layer of the enamel indicates that during tooth-bleaching with HP statistically significant loss of Na and Mg occurs, whereas the bleaching in combination with a laser leads to statistically significant loss of Ca and P. The results undoubtedly confirm that teeth whitening procedures lead to enamel alterations. In this context, it must be noted that laser bleaching is more aggressive for dental substances. However, these changes are reversible and can be repaired by application of remineralization toothpastes. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

Abutment tooth loss in patients with overdentures.

Science.gov (United States)

Ettinger, Ronald L; Qian, Fang

2004-06-01

Since the 1960s, the use of natural teeth as overdenture abutments has become part of accepted clinical practice. Several longitudinal studies have been conducted, but tooth loss has not been reported to be a significant problem. The aim of this study was to identify the incidence and causes of tooth loss in a prospective cohort study of subjects wearing overdentures. The study, conducted between 1973 and 1994, evaluated 273 subjects (62.3 percent male) with a mean age of 59.6 years. Of the 273 subjects with 666 abutments, 74 lost 133 abutments. The most common cause of tooth loss was periodontal disease (29.3 percent) followed by periapical lesions (18.8 percent) and caries (16.5 percent). Through logistic regression, the authors found that subjects who lost teeth were more likely to have medical problems that could cause soft-tissue lesions of the oral mucosa, were less likely to use fluoride daily and were less likely to return for yearly recall visits. The authors found 22 vertical fractures in 17 subjects. Chi2 analysis revealed that overdenture teeth in the maxillary arch that were opposed by natural teeth were more likely to experience vertical fractures. In a study that followed up some patients for as long as 22 years, the rate of tooth loss was 20.0 percent. Many of these failures could have been prevented if patients had practiced better oral hygiene. The findings suggest that if a dentist recommends overdenture therapy, the patient needs to be examined regularly to reduce the risk of experiencing caries and periodontal disease. Also, if the abutments are in the maxilla and are opposed by natural teeth, the dentist should consider using thimble crowns to reduce the risk of vertical fractures.

Gearbox tooth cut fault diagnostics using acoustic emission and vibration sensors--a comparative study.

Science.gov (United States)

Qu, Yongzhi; He, David; Yoon, Jae; Van Hecke, Brandon; Bechhoefer, Eric; Zhu, Junda

2014-01-14

In recent years, acoustic emission (AE) sensors and AE-based techniques have been developed and tested for gearbox fault diagnosis. In general, AE-based techniques require much higher sampling rates than vibration analysis-based techniques for gearbox fault diagnosis. Therefore, it is questionable whether an AE-based technique would give a better or at least the same performance as the vibration analysis-based techniques using the same sampling rate. To answer the question, this paper presents a comparative study for gearbox tooth damage level diagnostics using AE and vibration measurements, the first known attempt to compare the gearbox fault diagnostic performance of AE- and vibration analysis-based approaches using the same sampling rate. Partial tooth cut faults are seeded in a gearbox test rig and experimentally tested in a laboratory. Results have shown that the AE-based approach has the potential to differentiate gear tooth damage levels in comparison with the vibration-based approach. While vibration signals are easily affected by mechanical resonance, the AE signals show more stable performance.

Success Rate of Formocresol Pulpotomy versus Mineral Trioxide Aggregate in Human Primary Molar Tooth

Directory of Open Access Journals (Sweden)

S E Jabbarifar

2004-12-01

Full Text Available Background: In spite of long time and broad use of formaldehyde derivates (Fixation agent in primary tooth pulp treatment, There is some concerns about these derivates such as variability, inconsistency success rate, mutagenicity, cytotoxicity, alergenicity, and some other potential health hazards of them. Therefore other alternative pulpotomy procedures like Bioactive glass (BAG, Glutaraldehyde (2%, Hydroxyappetite (HA, Bone dried freezed (BDF, ferric sulfate (15%, laser, Electrosurgery (ES, Bone Morphogenic proteins (BMP, recombinant protein-1 (RP1, and Mineral Trioxide Aggregate (MTA have been compared. The purpose of this clinical trial is to assess radiographic and clinical success rate of Formocresol (FC pulpotomy in compare with MTA in human primary molar teeth. Methods: 64 molars were pulpotomized equally and randomly with mineral trioxide Aggregate and Formocresol. Prior to trial, we defined a case as failure, when one or more of the events such as external root resorption, internal root resorption, periapical and furca lucency, pain, swelling, mobility, dental abscess, or early extraction appeared. Every treated tooth was defined as successful, if any noted evident was not shown. Results: Totally, 60 teeth treatment (92.2 percent were successful and 7.8 percent were failed. Failure and success rates for MTA group were 6.3 and 93.7 percent, respectively. Failure and success rates in FC group were 8.4 and 90.2 percent respectively. The difference between MTA and FC treatment methods was not significant (Fisher Exact test. Conclusion: Findings of this study show that mineral trioxide aggregate can be an alternative procedure for FC pulpotomy of primary tooth. Keywords: Mineral trioxide aggregate, formocresol, pulpotomy, success and failure rate.

Severe tooth wear in Prader-Willi syndrome. A case-control study.

Science.gov (United States)

Saeves, Ronnaug; Espelid, Ivar; Storhaug, Kari; Sandvik, Leiv; Nordgarden, Hilde

2012-05-28

Prader-Willi syndrome (PWS) is a rare complex multsystemic genetic disorder characterized by severe neonatal hypotonia, endocrine disturbances, hyperphagia and obesity, mild mental retardation, learning disabilities, facial dysmorphology and oral abnormalities. The purpose of the present study was to explore the prevalence of tooth wear and possible risk factors in individuals with Prader-Willi syndrome. Forty-nine individuals (6-40 years) with PWS and an age- and sex-matched control group were included. Tooth wear was evaluated from dental casts and intraoral photographs and rated by four examiners using the Visual Erosion Dental Examination (VEDE) scoring system and the individual tooth wear index IA. In accordance with the VEDE scoring system, tooth wear was also evaluated clinically. Whole saliva was collected. Mean VEDE score was 1.70 ± 1.44 in the PWS group and 0.46 ± 0.36 in the control group (p Prader-Willi syndrome. There is therefore considerable need for prosthodontic rehabilitation in young adults with PWS.

The Absolute Deviation Rank Diagnostic Approach to Gear Tooth Composite Fault

Directory of Open Access Journals (Sweden)

Guangbin Wang

2017-01-01

Full Text Available Aiming at nonlinear and nonstationary characteristics of the different degree with single fault gear tooth broken, pitting, and composite fault gear tooth broken-pitting, a method for the diagnosis of absolute deviation of gear faults is presented. The method uses ADAMS, respectively, set-up dynamics model of single fault gear tooth broken, pitting, and composite fault gear tooth broken-pitting, to obtain the result of different degree of broken teeth, pitting the single fault and compound faults in the meshing frequency, and the amplitude frequency doubling through simulating analysis. Through the comparison with the normal state to obtain the sensitive characteristic of the fault, the absolute value deviation diagnostic approach is used to identify the fault and validate it through experiments. The results show that absolute deviation rank diagnostic approach can realize the recognition of gear single faults and compound faults with different degrees and provide quick reference to determine the degree of gear fault.

Tooth erosion awareness in a Brazilian dental school.

Science.gov (United States)

Hermont, Ana Paula; Oliveira, Patricia A D; Auad, Sheyla M

2011-12-01

The aim of this cross-sectional study was to assess awareness and attitudes related to tooth erosion among dental students, patients, and faculty members in a Brazilian dental school. Data were collected by means of a self-applied questionnaire that was distributed among 298 participants. The response rate was 89.6 percent. Chi-square and Fisher's exact tests were used for statistical analysis (perosion (72.9 percent), with lower percentages among the patients (perosion (p=0.004). Almost 30 percent of the students did not know if they had had a patient with erosion, and 73.1 percent reported they were not advised by their clinical supervisor to examine their patients for tooth erosion (p=0.138). Concerning the faculty, 23.6 percent of them along with 61.5 percent of the students did not feel prepared to diagnose the condition (perosion (89.6 percent). Knowledge about tooth erosion was not as widely evident as it should be in this sample, suggesting the need for better understanding and communication in this important area of oral health care.

Cigarette smoking and tooth loss experience among young adults: a national record linkage study

Directory of Open Access Journals (Sweden)

Tanaka Keiko

2007-11-01

Full Text Available Abstract Background Various factors affect tooth loss in older age including cigarette smoking; however, evidence regarding the association between smoking and tooth loss during young adulthood is limited. The present study examined the association between cigarette smoking and tooth loss experience among adults aged 20–39 years using linked data from two national databases in Japan. Methods Two databases of the National Nutrition Survey (NNS and the Survey of Dental Diseases (SDD, which were conducted in 1999, were obtained from the Ministry of Health, Labor and Welfare with permission for analytical use. In the NNS, participants received physical examinations and were interviewed regarding dietary intake and health practices including cigarette smoking, whereas in the SDD, participants were asked about their frequency of daily brushing, and received oral examinations by certified dentists. Among 6,805 records electronically linked via household identification code, 1314 records of individuals aged 20 to 39 years were analyzed. The prevalence of 1+ tooth loss was compared among non-, former, and current smokers. Multiple logistic regression models were constructed including confounders: frequency of tooth brushing, body mass index, alcohol consumption, and intake of vitamins C and E. Results Smoking rates differed greatly in men (53.3% and women (15.5%. The overall prevalence of tooth loss was 31.4% (31.8% men and 31.1% women. Tooth loss occurred more frequently among current smokers (40.6% than former (23.1% and non-smokers (27.9%. Current smoking showed a significant association with 1+ tooth loss in men (adjusted OR = 2.21 [1.40–3.50], P = 0.0007 and women (1.70 [1.13–2.55], P = 0.0111. A significant positive exposure-related relationship between cigarette smoking status and tooth loss was observed (P for trend Conclusion An association between cigarette smoking and tooth loss was evident among young adults throughout Japan. Due to

Ability of mini-implant-facilitated micro-osteoperforations to accelerate tooth movement in rats.

Science.gov (United States)

Cheung, Tracy; Park, Juyoung; Lee, Deborah; Kim, Catherine; Olson, Jeffrey; Javadi, Shadi; Lawson, Gregory; McCabe, James; Moon, Won; Ting, Kang; Hong, Christine

2016-12-01

Although current techniques for accelerated tooth movement often involve invasive surgical procedures, micro-osteoperforations (MOPs) using mini-implants may facilitate orthodontic tooth movement without raising flaps, reduce surgical risks, and increase patient acceptance. In this study, we evaluated the effectiveness of mini-implant-facilitated MOPs in inducing accelerated tooth movement and investigated the potential risks for root resorption. Five MOPs were placed on the left side around the maxillary first molars in 6 rats using an automated mini-implant driver, whereas the right side received no MOPs as the control. Closed-coiled springs were secured from incisors to first molars for orthodontic tooth movement. Tooth movement was measured, and samples underwent radiologic and histologic analyses. The MOP side exhibited a 1.86-fold increase in the rate of tooth movement with decreased bone density and bone volume around the first molars compared with the control side. Hematoxylin and eosin and tartrate-resistant acid phosphatase analyses showed increased numbers of osteoclasts as well as new bone formation. Three-dimensional volumetric analysis of all 5 roots of the maxillary first molars demonstrated no statistically significant difference in root volumes. Mini-implant-facilitated MOPs accelerated tooth movement without increased risk for root resorption and therefore may become a readily available and efficient treatment option to shorten orthodontic treatment time with improved patient acceptance. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Investigation of Effectiveness of Some Vibration-Based Techniques in Early Detection of Real-Time Fatigue Failure in Gears

Directory of Open Access Journals (Sweden)

Hasan Ozturk

2010-01-01

Full Text Available Bending fatigue crack is a dangerous and insidious mode of failure in gears. As it produces no debris in its early stages, it gives little warning during its progression, and usually results in either immediate loss of serviceability or greatly reduced power transmitting capacity. This paper presents the applications of vibration-based techniques (i.e. conventional time and frequency domain analysis, cepstrum, and continuous wavelet transform to real gear vibrations in the early detection, diagnosis and advancement monitoring of a real tooth fatigue crack and compares their detection and diagnostic capabilities on the basis of experimental results. Gear fatigue damage is achieved under heavy-loading conditions and the gearbox is allowed to run until the gears suffer badly from complete tooth breakage. It has been found that the initiation and progression of fatigue crack cannot be easily detected by conventional time and frequency domain approaches until the fault is significantly developed. On the contrary, the wavelet transform is quite sensitive to any change in gear vibration and reveals fault features earlier than other methods considered.

Assessment of the amount of tooth wear on dental casts and intra-oral photographs

NARCIS (Netherlands)

Wetselaar, P.; Wetselaar-Glas, M.J.M.; Koutris, M.; Visscher, C.M.; Lobbezoo, F.

2016-01-01

Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues. Many grading scales are available to assess the amount of tooth wear, one of which is the tooth wear evaluation system (TWES). A grading scale can be used chairside, on casts and on photographs. The aim was to test

The unicorn and the narwhal: a tale of the tooth.

Science.gov (United States)

Christen, Arden G; Christen, Joan A

2011-01-01

From as far back as the early Roman era, detailed descriptions and artistic images of the unicorn have been imagined. In Europe, the Mediterranean and the Far East, this creature became accepted as real. Although such an animal had never actually been seen, it was said to have the appearance of a horse, the beard and cloven hooves of a goat, the tail of a lion, and a single, spear-like horn protruding from the center of its forehead. The unicorn myth originated shortly after unidentified horn-like objects, from six to ten feet long, began to appear in ancient European marketplaces. Physicians quickly ascribed outlandish healing properties to these horns, pulverizing them for the treatment of various diseases. In 1638, a Danish zoologist challenged these claims and provided evidence that the so-called "unicorn horn" was actually the tusk (tooth) of the narwhal from the Arctic seas. However, his findings remained unheeded for the next 100 years. This paper explains how the myth of the unicorn and the purported powers contained within the substance of its magical horn evolved from the ages-old spoils of the Arctic fishing trade, where the narwhal was primarily speared for food and secondarily, for the export value of its ivory tusk. This unusually long, pointed and protruding single tooth, which breaks through the upper lip and the left jaw of each male narwhal, became a highly valuable commodity over the following centuries, due to its believed supernatural origins and curative qualities.

Tooth Wear Inclination in Great Ape Molars.

Science.gov (United States)

Knight-Sadler, Jordan; Fiorenza, Luca

2017-01-01

Primate dietary diversity is reflected in their dental morphology, with differences in size and shape of teeth. In particular, the tooth wear angle can provide insight into a species' ability to break down certain foods. To examine dietary and masticatory information, digitized polygon models of dental casts provide a basis for quantitative analysis of wear associated with tooth attrition. In this study, we analyze and compare the wear patterns of Pongo pygmaeus, Gorilla gorillagorilla and Pan troglodytes schweinfurthii lower molars, focusing on the degree of inclination of specific wear facets. The variation in wear angles appears to be indicative of jaw movements and the specific stresses imposed on food during mastication, reflecting thus the ecology of these species. Orangutans exhibit flatter wear angles, more typical of a diet consisting of hard and brittle foods, while gorillas show a wear pattern with a high degree of inclination, reflecting thus their more leafy diet. Chimpanzees, on the other hand, show intermediate inclinations, a pattern that could be related to their highly variable diet. This method is demonstrated to be a powerful tool for better understanding the relationship between food, mastication and tooth wear processes in living primates, and can be potentially used to reconstruct the diet of fossil species. © 2017 S. Karger AG, Basel.

The 3rd international intercomparison on EPR tooth dosimetry: Part 1, general analysis

International Nuclear Information System (INIS)

Wieser, A.; Debuyst, R.; Fattibene, P.

2005-01-01

The objective of the 3rd International Intercomparison on Electron Paramagnetic Resonance (EPR) Tooth Dosimetry was the evaluation of laboratories performing tooth enamel dosimetry below 300 mGy. Participants had to reconstruct the absorbed dose in tooth enamel from 11 molars, which were cut into two halves. One half of each tooth was irradiated in a 60 Co beam to doses in the ranges of 30-100 mGy (5 samples), 100-300 mGy (5 samples), and 300-900 mGy (1 sample). Fourteen international laboratories participated in this intercomparison programme. A first analysis of the results and an overview of the essential features of methods applied in different laboratories are presented. The relative standard deviation of results of all methods was better than 27% for applied doses in the range of 79-704 mGy. In the analysis of the unirradiated tooth halves 8% of the samples were identified as outliers with additional absorbed dose above background dose

Measurements and modelling of the influence of dentine colour and enamel on tooth colour.

Science.gov (United States)

Battersby, Paul D; Battersby, Stephen J

2015-03-01

We provide a quantitative predictive model for the extent to which coloured dentine, visible through the enamel, contributes to tooth colour. Our model uses (L(*),a(*),b(*)) measurements rather than spectral measurements. We have used a model system, composed of a slice of bovine enamel placed on top of coloured paper. We have measured the colour of the enamel-paper combination, as an analogue for a tooth, and have related this to the colour of the paper, as an analogue for dentine. By changing the paper colour, we have been able to explore how the colour of dentine determines tooth colour, according to our model system. We have also compared hydrated and desiccated samples. In qualitative terms, superimposing the enamel on top of the paper increases the "lightness" for all colours tested except white while simultaneously reducing the chromaticity, a measure of the extent to which the colour differs from grey. Desiccated enamel is much more effective at increasing the lightness and reducing the chromaticity than hydrated enamel. Quantitatively, our measurements are reproduced by the mathematical model we have developed to within 2% in "lightness" and about 8% in chromaticity. We are able to predict the colour of an analogue for a tooth, composed of bovine enamel and coloured paper, from the colour of an analogue for the dentine, the coloured paper alone, with good accuracy. This understanding provides insights into the role of dentine colour in determining tooth colour. Our work helps quantify the importance of dentine colour, compared to other, extrinsic causes of colour, such as staining, in determining the visible colour of teeth. Our predicted colours represent a baseline to which extrinsic sources will add. Copyright © 2015. Published by Elsevier Ltd.

Permanent tooth loss and sugar-sweetened beverage intake in U.S. young adults.

Science.gov (United States)

Kim, Sunkyung; Park, Sohyun; Lin, Mei

2017-03-01

In young adults, sugar-sweetened beverage (SSB) intake is associated with dental caries, which in turn is a major contributor to tooth loss. The independent role of SSB intake on tooth loss, however, has not been well-described. This cross-sectional study examined associations between tooth loss and SSB intake among U.S. young adults. The outcome was number of permanent teeth lost because of dental caries or periodontal disease (0, 1-5, ≥6 teeth). Data from the 2012 Behavioral Risk Factor Surveillance System were used. The 22,526 adults aged 18-39 years completed the Sugar Drink Module. The exposure variable was daily frequency of SSB intake. We used multinomial logistic regression to examine the adjusted associations between tooth loss and daily SSB consumption (0, >0 to 2 times/day). Approximately, 26% of young adults reported losing at least one permanent tooth. Tooth loss was positively associated with SSB intake frequency; the odds of losing 1-5 teeth were higher among adults drinking SSBs >0-2 times/day (OR = 1.97, 95%CI = 1.51-2.58) than non-SSB consumers. The odds of losing ≥6 teeth were higher among adults drinking SSBs 1-2 times/day (OR = 2.20, 95%CI = 1.15-4.22) and >2 times/day (OR = 2.81, 95%CI = 1.37-5.76) than non-SSB consumers. Frequency of SSB consumption was positively associated with tooth loss among young adults even when the average SSB intake was less than one time per day. This study suggests that efforts to reduce SSB intake among young adults may help to decrease the risk of tooth loss. © 2016 American Association of Public Health Dentistry.

Rolling-Tooth Core Breakoff and Retention Mechanism

Science.gov (United States)

Badescu, Mircea; Bickler, Donald B.; Sherrit, Stewart; Bar-Cohen, Yoseph; Bao, Xiaoqi; Hudson, Nicolas H.

2011-01-01

Sampling cores requires the controlled breakoff of the core at a known location with respect to the drill end. An additional problem is designing a mechanism that can be implemented at a small scale that is robust and versatile enough to be used for a variety of core samples. This design consists of a set of tubes (a drill tube and an inner tube) and a rolling element (rolling tooth). An additional tube can be used as a sample tube. The drill tube and the inner tube have longitudinal holes with the axes offset from the axis of each tube. The two eccentricities are equal. The inner tube fits inside the drill tube, and the sample tube fits inside the inner tube. While drilling, the two tubes are positioned relative to each other such that the sample tube is aligned with the drill tube axis and core. The drill tube includes teeth and flutes for cuttings removal. The inner tube includes, at the base, the rolling element implemented as a wheel on a shaft in an eccentric slot. An additional slot in the inner tube and a pin in the drill tube limit the relative motion of the two tubes. While drilling, the drill assembly rotates relative to the core and forces the rolling tooth to stay hidden in the slot along the inner tube wall. When the drilling depth has been reached, the drill bit assembly is rotated in the opposite direction, and the rolling tooth is engaged and penetrates into the core. Depending on the strength of the created core, the rolling tooth can score, lock the inner tube relative to the core, start the eccentric motion of the inner tube, and break the core. The tooth and the relative position of the two tubes can act as a core catcher or core-retention mechanism as well. The design was made to fit the core and hole parameters produced by an existing bit; the parts were fabricated and a series of demonstration tests were performed. This invention is potentially applicable to sample return and in situ missions to planets such as Mars and Venus, to moons such

Nuclear-chemical methods in a hard tooth tissue abrasion study

International Nuclear Information System (INIS)

Gosman, A.; Spevacek, V.; Konicek, J.; Vopalka, D.; Housova, D.; Dolezalova, L.

1999-01-01

The advanced method consists in implantation-labelling of the thin surface layers of the solid objects, e.g. hard tooth tissue, by atoms of suitable natural or artificial radionuclides. Nuclides from the uranium series were implanted into the surface by using nuclear recoil effect at alpha decay of 226 Ra to 222 Rn, alpha decay of 222 Rn to RaA, alpha decay of RaA to RaB (beta-emitter) and further alpha or beta emitters. With regard to chosen alpha detection and to the half-lives of the radionuclides, there was actually measured the activity of 222 Rn, RaA and RaC' in the thin surface layer. This was followed by the laboratory simulation of the abrasion in the system of 'toothbrush - various suspensions of the tooth-pastes - hard tooth tissue (or material standard - ivory)' in specially designed device - the dentoabrasion meter. The activities of the tissue surface measured before and after abrasion were used for calculations of the relative drop of the surface activity. On this basis the influence of various tooth-pastes containing various abrasive substances was determined. (author)

Tooth labeling in cone-beam CT using deep convolutional neural network for forensic identification

Science.gov (United States)

Miki, Yuma; Muramatsu, Chisako; Hayashi, Tatsuro; Zhou, Xiangrong; Hara, Takeshi; Katsumata, Akitoshi; Fujita, Hiroshi

2017-03-01

In large disasters, dental record plays an important role in forensic identification. However, filing dental charts for corpses is not an easy task for general dentists. Moreover, it is laborious and time-consuming work in cases of large scale disasters. We have been investigating a tooth labeling method on dental cone-beam CT images for the purpose of automatic filing of dental charts. In our method, individual tooth in CT images are detected and classified into seven tooth types using deep convolutional neural network. We employed the fully convolutional network using AlexNet architecture for detecting each tooth and applied our previous method using regular AlexNet for classifying the detected teeth into 7 tooth types. From 52 CT volumes obtained by two imaging systems, five images each were randomly selected as test data, and the remaining 42 cases were used as training data. The result showed the tooth detection accuracy of 77.4% with the average false detection of 5.8 per image. The result indicates the potential utility of the proposed method for automatic recording of dental information.

Resection of the Tooth Apex with Diode Laser

Directory of Open Access Journals (Sweden)

Uzunov Tz.

2014-06-01

Full Text Available An “in vitro” experimental study has been carried out on 70 extracted teeth. A laser resection of the root apex has been carried out with diode laser beam with a wavelength of - 810 ± 10 nm. Sequentially a radiation with increasing power has been applied, as follows: 1,3 W, 2W, 3W, 4W, 5W, 6W, 7W, in electro surgery mode. Successful resection of the tooth apex has been performed at: 3W; 4W; 5W; 6W and 7W power. It was established that when laser resected the tooth apex carbonizes.

Optimized use of cooling holes to decrease the amount of thermal damage on a plastic gear tooth

Directory of Open Access Journals (Sweden)

Demagna Koffi

2016-05-01

Full Text Available The full potential of plastic gear usage is limited by not only poor mechanical properties but also equally poor temperature limits and poor heat conduction properties. Cooling holes were developed to decrease the amount of thermal damage on the contact surface. These cooling holes promote increased stress and tooth deflection, thus exerting a negative effect. This article compares various cooling holes for plastic gear configurations and proposes novel cooling holes. Thermal and mechanical simulations that consider specific aspects of plastic gear meshing were performed. The main objective of this article was to verify the best methods for reducing thermal damage through cooling holes. The results indicate the best compromise between the temperature reduction and the mechanical properties of the new tooth geometry. The results also indicate that the simple variations in the cooling holes proposed can improve tooth performance.

Revascularization of an impacted, immature dilacerated permanent maxillary central incisor associated with odontoma and a supernumerary tooth

Directory of Open Access Journals (Sweden)

Priya Subramaniam

2013-01-01

Full Text Available To intentionally replant an impacted immature permanent maxillary central incisor in the mixed dentition period followed by revascularization in order to achieve apical root closure. A 9-year-old boy presented with retained maxillary left primary incisors. Radiographic evaluation revealed the presence of a supernumerary tooth and an odontoma associated with an impacted permanent maxillary left central incisor, having root dilaceration. Treatment included surgical removal of mesiodens and odontoma. The impacted dilacerated permanent central incisor was removed and intentionally replanted, followed by revascularization of pulp. During the follow-up, root end closure with narrowing of canal space was observed, patient has been asymptomatic and the tooth remains vital. Revascularization of the immature reimplanted tooth showed continued root development and thickening of the lateral dentinal walls through deposition of new hard tissue and narrowing of the canal space.

Simple direct composite resin restoration on endodontically treated tooth: A case report

Directory of Open Access Journals (Sweden)

Wahyuni Suci Dwiandhany

2016-06-01

Full Text Available Endodontically treated teeth generally havegreat structure loss so that the resistance to fracture is reduced. Therefore, the post-endodontic restoration design that covers the entire cusp (full cuspal coverage is necessary to increase the resistance of teeth to fracture. The aim of this case report is to present direct onlay restoration technique using composite resin material in non-vital tooth with chronic apical periodontitis. A 74-years-old male patient came to the clinic complaining of discomfort in the lower right posterior tooth related to eating since 1 week ago. Clinical examination revealed a large amalgam restoration on the second lower right molar, the tooth is negative to pulp sensitivity test, and tender to percussion. Radiographically, the tooth showed periapical radiolucency at distal and mesial root. The diagnosis of the tooth was chronic apical periodontitis. The treatment plan is a non-vital root canal treatment with multiple visit. Root canal preparation with rotary files (ProTaper Next, Dentsply, Germany was performed on the first visit and irrigated with NaOCl. On the next visit, during subjective examination, there was no pain complaints and the percussion test was negative so the obturation with a single cone technique can be done. On the final visit, direct onlay restoration using nano-hybrid composite resin material (Polofil NHT, Voco, Germany was performed. In conclusion, after 3 months follow up, the marginal integrity of the restoration remains intact and the tooth were functioned properly.

Dental Fear in Children with Repeated Tooth Injuries.

Science.gov (United States)

Negovetić Vranić, Dubravka; Ivančić Jokić, Nataša; Bakarčić, Danko; Carek, Andreja; Rotim, Željko; Verzak, Željko

2016-06-01

Tooth injuries are serious clinical conditions. Some children experience dental trauma only once, while others are more prone to repeated tooth injuries. Repeated dental trauma occurs in 19.4% to 30% of patients. Pain and dental trauma are the most common reasons for fear and anxiety. The main objective of this study was to investigate how dental trauma, as well as repeated dental trauma affects the occurrence and development of dental fear in children. The study was conducted on a random sample of 147 subjects (88 boys and 59 girls) aged 5-8 and 9-12 years. Subjects in both age groups were divided into subroups without dental trauma, with one dental trauma and with repeated dental trauma. The validated Children’s Fear Survey Schedule – Dental Subscale was used on fear assessment. Results showed that only 12.2% of children without trauma, 33.3% with one trauma and 51.7% with repeated trauma were not afraid of injection. Older children had a significantly lower fear of injections, touch of an unknown person, choking, going to the hospital and people in white uniforms. Dentist was not the cause of fear in 65.5% of patients with repeated trauma. With each repeated injury of teeth, the degree of their fear of dental treatment was lower.

Inversion voltammeter definition of heavy metals in tooth pastes

International Nuclear Information System (INIS)

Kurbatov, D.I.; Buldakova, L.Yu.; Pichugina, A.S.

2004-01-01

Electrochemical behaviour of some heavy metals at their combined presence is studied by voltammetric method with use of graphite content sensor. The method of determination of Hg, Pb, Cd, Cu, and Zn in the tooth pastes, based on transfer of hallmark in a solution and voltammeter diagram registration is developed. Duration of the analysis (3 collateral hallmarks) makes no more than 1.5 h. An error - 10-15 % at the contents of determined elements of the (1-5) x 10 -4 % [ru

Reactive correction of a maxillary incisor in single-tooth crossbite following periodontal therapy.

Science.gov (United States)

Huang, Chih-Hao; Brunsvold, Michael A

2005-05-01

The reactive correction of a single tooth anterior crossbite following periodontal therapy is described. This case report provides new information regarding correction of a crossbite relationship and con- firms existing reports of tooth movement following periodontal therapy. A 39-year-old woman in good general health presented with a history of recurrent periodontal abscesses of a maxillary incisor. Probing depths of the abscessed tooth ranged from 5 to 12 mm, and class 1 mobility was noted. Radiographs revealed that the tooth had previously been treated endodontically. The patient's periodontal diagnosis was generalized chronic moderate to severe periodontitis. Treatment considerations were complicated by a single-tooth crossbite relationship of the involved incisor and clinical evidence that the periodontal abscess communicated with an apical infection. Treatment of the abscess consisted of cause-related therapy, bone grafting, and occlusal adjustment. Five months after surgical treatment, an edge-to-edge incisal relationship was observed, the first indicator of tooth movement. Further correction to a normal incisal relationship resulted 1 year after modification of the proximal contact. At this time, there was normal probing depth with only slight recession and mobility. Bone fill was radiographically noted. It appears that some cases of maxillary incisor crossbite that are complicated by periodontal disease may be corrected, without orthodontic appliances, following periodontal treatment.

In vitro optical detection of simulated blood pulse in a human tooth pulp model.

Science.gov (United States)

Niklas, A; Hiller, K-A; Jaeger, A; Brandt, M; Putzger, J; Ermer, C; Schulz, I; Monkman, G; Giglberger, S; Hirmer, M; Danilov, S; Ganichev, S; Schmalz, G

2014-01-01

Noninvasive optical methods such as photoplethysmography, established for blood pulse detection in organs, have been proposed for vitality testing of human dental pulp. However, no information is available on the mechanism of action in a closed pulp chamber and on the impairing influence of other than pulpal blood flow sources. Therefore, the aim of the present in vitro study was to develop a device for the optical detection of pulpal blood pulse and to investigate the influence of different parameters (including gingival blood flow [GBF] simulation) on the derived signals. Air, Millipore water, human erythrocyte suspensions (HES), non-particulate hemoglobin suspension (NPHS), and lysed hemoglobin suspension (LHES) were pulsed through a flexible (silicone) or a rigid (glass) tube placed within an extracted human molar in a tooth-gingiva model. HES was additionally pulsed through a rigid tube around the tooth, simulating GBF alone or combined with the flow through the tooth by two separate peristaltic pumps. Light from high-power light-emitting diodes (625 nm (red) and 940 nm (infrared [IR]); Golden Dragon, Osram, Germany) was introduced to the coronal/buccal part of the tooth, and the signal amplitude [∆U, in volts] of transmitted light was detected by a sensor at the opposite side of the tooth. Signal processing was carried out by means of a newly developed blood pulse detector. Finally, experiments were repeated with the application of rubber dam (blue, purple, pink, and black), aluminum foil, and black antistatic plastic foil. Nonparametric statistical analysis was applied (n = 5; α = 0.05). Signals were obtained for HES and LHES, but not with air, Millipore water, or NPHS. Using a flexible tube, signals for HES were higher for IR compared to red light, whereas for the rigid tube, the signals were significantly higher for red light than for IR. In general, significantly less signal amplitude was recorded for HES with the rigid glass tube than with the

A Survey of tooth morphology teaching methods employed in the United Kingdom and Ireland.

Science.gov (United States)

Lone, M; McKenna, J P; Cryan, J F; Downer, E J; Toulouse, A

2018-01-15

Tooth morphology is a central component of the dental curriculum and is applicable to all dental specialities. Traditional teaching methods are being supplemented with innovative strategies to tailor teaching and accommodate the learning styles of the recent generation of students. An online survey was compiled and distributed to the staff involved in teaching tooth morphology in the United Kingdom and Ireland to assess the importance of tooth morphology in the dentistry curriculum and the methodologies employed in teaching. The results of the survey show that tooth morphology constitutes a small module in the dental curriculum. It is taught in the first 2 years of the dental curriculum but is applicable in the clinical years and throughout the dental career. Traditional teaching methods, lecture and practical, are being augmented with innovative teaching including e-learning via virtual learning environment, tooth atlas and e-books leading to blended learning. The majority of the schools teach both normal dental anatomy and morphologic variations of dental anatomy and utilise plastic teeth for practical and examination purposes. Learning the 3D aspects of tooth morphology was deemed important by most of the respondents who also agreed that tooth morphology is a difficult topic for the students. Despite being core to the dental curriculum, overall minimal time is dedicated to the delivery of tooth morphology, creating a reliance on the student to learn the material. New forms of delivery including computer-assisted learning tools should help sustain learning and previously acquired knowledge. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of Dietary Vitamin C on Orthodontic Tooth Movement in Rats

Directory of Open Access Journals (Sweden)

Amirfarhang Miresmaeili

2015-11-01

Full Text Available Objectives: Bone remodeling occurs during orthodontic treatment; this process enables tooth movement. Many factors can affect bone remodeling at the cellular level, such as nutritional supplements that can affect tooth movement. The present study was designed to evaluate the effect of dietary vitamin C on orthodontic tooth movement in rats. Materials and Methods: This study was carried out on 36 six-week male Wistar rats with a mean weight of 225+32 g, which were randomly allocated to two equal groups. Rats in the case group received 1wt% vitamin C in their daily water. Opening springs were placed on the incisor teeth of both case and control groups. After 17 days, rats were sacrificed; the distance between the mesio-incisal angles of these teeth was measured with a digital caliper. Histological sections were made containing incisor teeth and alveolar bone and stained by hematoxylin-eosin. The number of resorption lacunae was evaluated using light microscopy.Results: Our findings showed that the amount of tooth movement in the vitamin C group was significantly higher than that in the control group (P<0.001. The osteoclast counts were significantly higher in vitamin C group (P=0.036.Conclusion: Oral vitamin C can increase orthodontic tooth movement in rats with more osteoclast lacunae around root in the pressure area. 

Effect of Cervical Lessions on the Tooth FEM Study

OpenAIRE

Gabriela Bereşescu; Ligia Brezeanu; Claudia Şoaita

2010-01-01

The approach used until recently concerning the phenomena of dental abfraction points to the conclusion that the cervical area of the tooth, were this type of lesion usually occur, concentrates the stress resulted from the action of the forces applied on various areas on the crown. Moreover, any lesion in the cervical area facilitates the possibility of its advance into the tooth, ultimately fracturing it. Our paper presents a FEM (finite element method) study on the results of a mechanical a...

The HOX genes are expressed, in vivo, in human tooth germs: in vitro cAMP exposure of dental pulp cells results in parallel HOX network activation and neuronal differentiation.

Science.gov (United States)

D'Antò, Vincenzo; Cantile, Monica; D'Armiento, Maria; Schiavo, Giulia; Spagnuolo, Gianrico; Terracciano, Luigi; Vecchione, Raffaela; Cillo, Clemente

2006-03-01

Homeobox-containing genes play a crucial role in odontogenesis. After the detection of Dlx and Msx genes in overlapping domains along maxillary and mandibular processes, a homeobox odontogenic code has been proposed to explain the interaction between different homeobox genes during dental lamina patterning. No role has so far been assigned to the Hox gene network in the homeobox odontogenic code due to studies on specific Hox genes and evolutionary considerations. Despite its involvement in early patterning during embryonal development, the HOX gene network, the most repeat-poor regions of the human genome, controls the phenotype identity of adult eukaryotic cells. Here, according to our results, the HOX gene network appears to be active in human tooth germs between 18 and 24 weeks of development. The immunohistochemical localization of specific HOX proteins mostly concerns the epithelial tooth germ compartment. Furthermore, only a few genes of the network are active in embryonal retromolar tissues, as well as in ectomesenchymal dental pulp cells (DPC) grown in vitro from adult human molar. Exposure of DPCs to cAMP induces the expression of from three to nine total HOX genes of the network in parallel with phenotype modifications with traits of neuronal differentiation. Our observations suggest that: (i) by combining its component genes, the HOX gene network determines the phenotype identity of epithelial and ectomesenchymal cells interacting in the generation of human tooth germ; (ii) cAMP treatment activates the HOX network and induces, in parallel, a neuronal-like phenotype in human primary ectomesenchymal dental pulp cells. 2005 Wiley-Liss, Inc.

Dependencies of the radiation sensitivity of human tooth enamel in EPR dosimetry

International Nuclear Information System (INIS)

Wieser, A.; El-Faramawy, N.; Meckbach, R.

2001-01-01

The EPR dose response of tooth enamel was determined for human molars collected in Egypt. The influence of age, gender and residence of the tooth donors as well as tooth position and sample preparation on EPR sensitivity and its variability over the enamel samples was investigated. The EPR sensitivity and its variability were found to depend only on the sample preparation procedure. The variability in EPR sensitivity of enamel from Egyptian teeth was maximally 10% and the mean sensitivity was in good agreement with that of German teeth

Autotransplantation of Premolars With a 3-Dimensional Printed Titanium Replica of the Donor Tooth Functioning as a Surgical Guide: Proof of Concept.

Science.gov (United States)

Verweij, Jop P; Moin, David Anssari; Mensink, Gertjan; Nijkamp, Peter; Wismeijer, Daniel; van Merkesteyn, J P Richard

2016-06-01

Autotransplantation of premolars is a good treatment option for young patients who have missing teeth. This study evaluated the use of a preoperatively 3-dimensional (3D)-printed replica of the donor tooth that functions as a surgical guide during autotransplantation. Five consecutive procedures were prospectively observed. Transplantations of maxillary premolars with optimal root development were included in this study. A 3D-printed replica of the donor tooth was used to prepare a precisely fitting new alveolus at the recipient site before extracting the donor tooth. Procedure time, extra-alveolar time, and number of attempts needed to achieve a good fit of the donor tooth in the new alveolus were recorded. For each transplantation procedure, the surgical time was shorter than 30 minutes. An immediate good fit of the donor tooth in the new alveolus was achieved with an extra-alveolar time shorter than 1 minute for all transplantations. These results show that the extra-alveolar time is very short when the surgical guide is used; therefore, the chance of iatrogenic damage to the donor tooth is minimized. The use of a replica of the donor tooth makes the autotransplantation procedure easier for the surgeon and facilitates optimal placement of the transplant. Copyright © 2016 The American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Computerized Analysis of Digital Photographs for Evaluation of Tooth Movement.

Science.gov (United States)

Toodehzaeim, Mohammad Hossein; Karandish, Maryam; Karandish, Mohammad Nabi

2015-03-01

Various methods have been introduced for evaluation of tooth movement in orthodontics. The challenge is to adopt the most accurate and most beneficial method for patients. This study was designed to introduce analysis of digital photographs with AutoCAD software as a method to evaluate tooth movement and assess the reliability of this method. Eighteen patients were evaluated in this study. Three intraoral digital images from the buccal view were captured from each patient in half an hour interval. All the photos were sent to AutoCAD software 2011, calibrated and the distance between canine and molar hooks were measured. The data was analyzed using intraclass correlation coefficient. Photographs were found to have high reliability coefficient (P > 0.05). The introduced method is an accurate, efficient and reliable method for evaluation of tooth movement.

Oral Health Problems And Causes Of Tooth Loss At The University ...

African Journals Online (AJOL)

Context Several oral diseases and conditions are associated with tooth loss. Objective: The aim of this study was to determine the prevalence of oral health problems seen at the University of Nigeria Teaching Hospital (UNTH) in one year with the view to highlighting causes of tooth loss in this environment. Methods This ...

Causes of Charcot-Marie-Tooth Disease (CMT)

Science.gov (United States)

... Marie-Tooth Disease (CMT) Congenital Muscular Dystrophy (CMD) Duchenne Muscular Dystrophy (DMD) Emery-Dreifuss Muscular Dystrophy Endocrine Myopathies Metabolic Diseases of Muscle Mitochondrial Myopathies (MM) Myotonic Dystrophy (DM) Spinal-Bulbar ...

Toward accurate tooth segmentation from computed tomography images using a hybrid level set model

Energy Technology Data Exchange (ETDEWEB)

Gan, Yangzhou; Zhao, Qunfei [Department of Automation, Shanghai Jiao Tong University, and Key Laboratory of System Control and Information Processing, Ministry of Education of China, Shanghai 200240 (China); Xia, Zeyang, E-mail: zy.xia@siat.ac.cn, E-mail: jing.xiong@siat.ac.cn; Hu, Ying [Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, and The Chinese University of Hong Kong, Shenzhen 518055 (China); Xiong, Jing, E-mail: zy.xia@siat.ac.cn, E-mail: jing.xiong@siat.ac.cn [Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 510855 (China); Zhang, Jianwei [TAMS, Department of Informatics, University of Hamburg, Hamburg 22527 (Germany)

2015-01-15

Purpose: A three-dimensional (3D) model of the teeth provides important information for orthodontic diagnosis and treatment planning. Tooth segmentation is an essential step in generating the 3D digital model from computed tomography (CT) images. The aim of this study is to develop an accurate and efficient tooth segmentation method from CT images. Methods: The 3D dental CT volumetric images are segmented slice by slice in a two-dimensional (2D) transverse plane. The 2D segmentation is composed of a manual initialization step and an automatic slice by slice segmentation step. In the manual initialization step, the user manually picks a starting slice and selects a seed point for each tooth in this slice. In the automatic slice segmentation step, a developed hybrid level set model is applied to segment tooth contours from each slice. Tooth contour propagation strategy is employed to initialize the level set function automatically. Cone beam CT (CBCT) images of two subjects were used to tune the parameters. Images of 16 additional subjects were used to validate the performance of the method. Volume overlap metrics and surface distance metrics were adopted to assess the segmentation accuracy quantitatively. The volume overlap metrics were volume difference (VD, mm{sup 3}) and Dice similarity coefficient (DSC, %). The surface distance metrics were average symmetric surface distance (ASSD, mm), RMS (root mean square) symmetric surface distance (RMSSSD, mm), and maximum symmetric surface distance (MSSD, mm). Computation time was recorded to assess the efficiency. The performance of the proposed method has been compared with two state-of-the-art methods. Results: For the tested CBCT images, the VD, DSC, ASSD, RMSSSD, and MSSD for the incisor were 38.16 ± 12.94 mm{sup 3}, 88.82 ± 2.14%, 0.29 ± 0.03 mm, 0.32 ± 0.08 mm, and 1.25 ± 0.58 mm, respectively; the VD, DSC, ASSD, RMSSSD, and MSSD for the canine were 49.12 ± 9.33 mm{sup 3}, 91.57 ± 0.82%, 0.27 ± 0.02 mm, 0

Toward accurate tooth segmentation from computed tomography images using a hybrid level set model

International Nuclear Information System (INIS)

Gan, Yangzhou; Zhao, Qunfei; Xia, Zeyang; Hu, Ying; Xiong, Jing; Zhang, Jianwei

2015-01-01

Purpose: A three-dimensional (3D) model of the teeth provides important information for orthodontic diagnosis and treatment planning. Tooth segmentation is an essential step in generating the 3D digital model from computed tomography (CT) images. The aim of this study is to develop an accurate and efficient tooth segmentation method from CT images. Methods: The 3D dental CT volumetric images are segmented slice by slice in a two-dimensional (2D) transverse plane. The 2D segmentation is composed of a manual initialization step and an automatic slice by slice segmentation step. In the manual initialization step, the user manually picks a starting slice and selects a seed point for each tooth in this slice. In the automatic slice segmentation step, a developed hybrid level set model is applied to segment tooth contours from each slice. Tooth contour propagation strategy is employed to initialize the level set function automatically. Cone beam CT (CBCT) images of two subjects were used to tune the parameters. Images of 16 additional subjects were used to validate the performance of the method. Volume overlap metrics and surface distance metrics were adopted to assess the segmentation accuracy quantitatively. The volume overlap metrics were volume difference (VD, mm 3 ) and Dice similarity coefficient (DSC, %). The surface distance metrics were average symmetric surface distance (ASSD, mm), RMS (root mean square) symmetric surface distance (RMSSSD, mm), and maximum symmetric surface distance (MSSD, mm). Computation time was recorded to assess the efficiency. The performance of the proposed method has been compared with two state-of-the-art methods. Results: For the tested CBCT images, the VD, DSC, ASSD, RMSSSD, and MSSD for the incisor were 38.16 ± 12.94 mm 3 , 88.82 ± 2.14%, 0.29 ± 0.03 mm, 0.32 ± 0.08 mm, and 1.25 ± 0.58 mm, respectively; the VD, DSC, ASSD, RMSSSD, and MSSD for the canine were 49.12 ± 9.33 mm 3 , 91.57 ± 0.82%, 0.27 ± 0.02 mm, 0.28 ± 0.03 mm

Osteitis pubis ameliorated after tooth extraction: a case report.

Science.gov (United States)

Fukushi, Jun-ichi; Nakashima, Yasuharu; Iwamoto, Yukihide

2013-03-01

Osteitis pubis is a non-infective inflammation of the symphysis pubis, which is known to be associated with trauma, athletic exertion, urological or gynecological surgery, or with rheumatic conditions such as seronegative spondyloarthropathies. In this report, we describe a case of osteitis pubis whose symptoms were completely ameliorated following tooth extraction attributable to periodontitis. A 57-year-old female patient developed osteitis pubis, presenting with pain in the groin area with an elevated Creactive protein (CRP; 4.4 mg/dl) and radiological erosive changes in symphysis pubis. Prednisolone (5 mg/day) and etodolac were prescribed, but the patient's symptoms improved only partially and remained persistent. One year from the patient's first visit, three teeth were extracted due to severe chronic periodontitis, which she had been suffering from for years. Soon after the above tooth extraction, her symptoms appeared completely resolved, and the patient's CRP was decreased to nearly normal levels in 4 weeks. Human leukocyte antigen (HLA)-typing analysis revealed a positive result for HLA-A11, A24, and B54. Because HLA-B54 cross-reacts with HLA-B27, the patient's osteitis pubis was considered to be a form of reactive arthritis associated with periodontitis.

Role of stretch therapy in comprehensive physical habilitation of patients with Charcot–Marie–Tooth hereditary neuropathy

Directory of Open Access Journals (Sweden)

N. A. Shnayder

2015-01-01

Full Text Available Charcot–Marie–Tooth hereditary neuropathy (Charcot–Marie–Tooth disease, CMT is the most common form of hereditary neuropathies, accompanied by sensory disorders, progressive muscle weakness with the formation of disabling contractures of the limbs. Currently, the main treatment program is effective CMT habilitation, which can prevent the development of limb deformities and thereby improve the life quality of the patient. Stretch therapy is one of the most effective methods of prevention and treatment of contractures in patients with CMT. This article provides a brief review of the literature regarding the use of stretching as physical therapy program of CMT habilitation.

Nicotinic Receptor Alpha7 Expression during Tooth Morphogenesis Reveals Functional Pleiotropy

Science.gov (United States)

Rogers, Scott W.; Gahring, Lorise C.

2012-01-01

The expression of nicotinic acetylcholine receptor (nAChR) subtype, alpha7, was investigated in the developing teeth of mice that were modified through homologous recombination to express a bi-cistronic IRES-driven tau-enhanced green fluorescent protein (GFP); alpha7GFP) or IRES-Cre (alpha7Cre). The expression of alpha7GFP was detected first in cells of the condensing mesenchyme at embryonic (E) day E13.5 where it intensifies through E14.5. This expression ends abruptly at E15.5, but was again observed in ameloblasts of incisors at E16.5 or molar ameloblasts by E17.5–E18.5. This expression remains detectable until molar enamel deposition is completed or throughout life as in the constantly erupting mouse incisors. The expression of alpha7GFP also identifies all stages of innervation of the tooth organ. Ablation of the alpha7-cell lineage using a conditional alpha7Cre×ROSA26-LoxP(diphtheria toxin A) strategy substantially reduced the mesenchyme and this corresponded with excessive epithelium overgrowth consistent with an instructive role by these cells during ectoderm patterning. However, alpha7knock-out (KO) mice exhibited normal tooth size and shape indicating that under normal conditions alpha7 expression is dispensable to this process. The function of ameloblasts in alpha7KO mice is altered relative to controls. High resolution micro-computed tomography analysis of adult mandibular incisors revealed enamel volume of the alpha7KO was significantly reduced and the organization of enamel rods was altered relative to controls. These results demonstrate distinct and varied spatiotemporal expression of alpha7 during tooth development, and they suggest that dysfunction of this receptor would have diverse impacts upon the adult organ. PMID:22666322

Dental-derived Stem Cells and whole Tooth Regeneration: an Overview

OpenAIRE

Dannan, Aous

2009-01-01

The need for new dental tissue-replacement therapies is evident in recent reports which reveal startling statistics regarding the high incidence of tooth decay and tooth loss. Recent advances in the identification and characterization of dental stem cells, and in dental tissue-engineering strategies, suggest that bioengineering approaches may successfully be used to regenerate dental tissues and whole teeth. Interest in dental tissue-regeneration applications continues to increase as clinical...

[The effect of osteogenic inducer on healing of tooth extraction sockets].

Science.gov (United States)

Chen, Junliang; Shan, Chuncheng; He, Yun; Xia, Delin

2012-06-01

To study the effect of osteogenic inducer (dexamethasone, beta-sodium glycerophosphate and Vitamin C) carried by gelatin sponge on healing and remodeling of tooth extraction sockets. Fifty rabbits were selected. After extracting the first premolars of bilateral maxillary, the right side tooth extraction sockets were filled with gelatin sponge containing osteogenic inducer as experimental side, tooth extraction sockets on left side were filled with gelatin sponge as control. Every ten rabbits were executed at the end of 1, 2, 4, 8, 12 weeks after tooth extraction. Bone density was measured through digital X-ray images. The specimens were examined by histology. The absorption height of alveolar bone at 12 weeks was measured. X-ray measurement showed that the bone density of experimental side was higher than that of control side at 2, 4, 8, 12 weeks, the difference had statistical significance (Psockets of experimental side was earlier than that in control side. The absorptional height of alveolar bone had significant difference between experimental side and control side (Psockets can promote the healing and new bone formation and prevent from alveolar bone absorption.