WorldWideScience

Sample records for dynamic penetration test

  1. Penetration testing with Perl

    CERN Document Server

    Berdeaux, Douglas

    2014-01-01

    If you are an expert Perl programmer interested in penetration testing or information security, this guide is designed for you. However, it will also be helpful for you even if you have little or no Linux shell experience.

  2. Metasploit penetration testing cookbook

    CERN Document Server

    Agarwal, Monika

    2013-01-01

    This book follows a Cookbook style with recipes explaining the steps for penetration testing with WLAN, VOIP, and even cloud computing. There is plenty of code and commands used to make your learning curve easy and quick.This book targets both professional penetration testers as well as new users of Metasploit, who wish to gain expertise over the framework and learn an additional skill of penetration testing, not limited to a particular OS. The book requires basic knowledge of scanning, exploitation, and the Ruby language.

  3. Modeling of light dynamic cone penetration test - Panda 3 ® in granular material by using 3D Discrete element method

    Science.gov (United States)

    Tran, Quoc Anh; Chevalier, Bastien; Benz, Miguel; Breul, Pierre; Gourvès, Roland

    2017-06-01

    The recent technological developments made on the light dynamic penetration test Panda 3 ® provide a dynamic load-penetration curve σp - sp for each impact. This curve is influenced by the mechanical and physical properties of the investigated granular media. In order to analyze and exploit the load-penetration curve, a numerical model of penetration test using 3D Discrete Element Method is proposed for reproducing tests in dynamic conditions in granular media. All parameters of impact used in this model have at first been calibrated by respecting mechanical and geometrical properties of the hammer and the rod. There is a good agreement between experimental results and the ones obtained from simulations in 2D or 3D. After creating a sample, we will simulate the Panda 3 ®. It is possible to measure directly the dynamic load-penetration curve occurring at the tip for each impact. Using the force and acceleration measured in the top part of the rod, it is possible to separate the incident and reflected waves and then calculate the tip's load-penetration curve. The load-penetration curve obtained is qualitatively similar with that obtained by experimental tests. In addition, the frequency analysis of the measured signals present also a good compliance with that measured in reality when the tip resistance is qualitatively similar.

  4. An Overview of Penetration Testing

    OpenAIRE

    2011-01-01

    Penetration testing is a series of activities undertaken to identify and exploit security vulnerabilities. It helps confirm the effectiveness or ineffectiveness of the security measures that have been implemented. This paper provides an overview of penetration testing. It discusses the benefits, the strategies and the methodology of conducting penetration testing. The methodology of penetration testing includes three phases: test preparation, test and test analysis. The test phase involves ...

  5. Python penetration testing essentials

    CERN Document Server

    Mohit

    2015-01-01

    If you are a Python programmer or a security researcher who has basic knowledge of Python programming and want to learn about penetration testing with the help of Python, this book is ideal for you. Even if you are new to the field of ethical hacking, this book can help you find the vulnerabilities in your system so that you are ready to tackle any kind of attack or intrusion.

  6. An Overview of Penetration Testing

    Directory of Open Access Journals (Sweden)

    Aileen G. Bacudio

    2011-12-01

    Full Text Available Penetration testing is a series of activities undertaken to identify and exploit security vulnerabilities. It helps confirm the effectiveness or ineffectiveness of the security measures that have been implemented. This paper provides an overview of penetration testing. It discusses the benefits, the strategies and the methodology of conducting penetration testing. The methodology of penetration testing includes three phases: test preparation, test and test analysis. The test phase involves the following steps: information gathering, vulnerability analysis, and vulnerability exploit. This paper further illustrates how to apply this methodology to conduct penetration testing on two example web applications.

  7. Penetration Testing: A Review

    Directory of Open Access Journals (Sweden)

    Kumar Shravan

    2014-04-01

    Full Text Available : Network Security is becoming more and more crucial as the volume of data being exchanged on the Internet increases. When people use Internet, they have certain expectations. They expect confidentiality, data integrity and authentication (CIA Standards. In 1980’s most organizations had only a physical boundary that needed protection of the assets. Today, due to the changes in the way resources are made available Organizations are forced to verify that their assets are protected from both the external and internal threats that our working environment has enabled. Due to the increasing dependency of our society on networked information system the overall security of these systems should be measured and improved. The most accurate method to evaluate organization’s information security stance is to observe how it stands up against an attack. Network administrators have often tried their best by improving their network security, however with rapid surface of new exploits; the best way of ensuring that the system is secure is to attempt penetration testing. This would be the most effective way to find exploits and to proof whether a system is vulnerable. Penetration test ing often allows the security analyst to find new vulnerabilities.

  8. Physical Penetration Testing: A Whole New Story in Penetration Testing

    NARCIS (Netherlands)

    Dimkov, Trajce; Pieters, Wolter

    2011-01-01

    Physical penetration testing plays an important role in assuring a company that the security policies are properly enforced and that the security awareness of the employees is on the appropriate level. In physical penetration tests the tester physically enters restricted locations and directly inter

  9. Physical Penetration Testing: A Whole New Story in Penetration Testing

    OpenAIRE

    2011-01-01

    Physical penetration testing plays an important role in assuring a company that the security policies are properly enforced and that the security awareness of the employees is on the appropriate level. In physical penetration tests the tester physically enters restricted locations and directly interacts with the employees to convince them to break a policy or provide credentials. The physical access and the direct interaction with the employees complicate the execution of the tests and have e...

  10. Modeling of light dynamic cone penetration test – Panda 3 ® in granular material by using 3D Discrete element method

    Directory of Open Access Journals (Sweden)

    Tran Quoc Anh

    2017-01-01

    Full Text Available The recent technological developments made on the light dynamic penetration test Panda 3 ® provide a dynamic load–penetration curve σp – sp for each impact. This curve is influenced by the mechanical and physical properties of the investigated granular media. In order to analyze and exploit the load-penetration curve, a numerical model of penetration test using 3D Discrete Element Method is proposed for reproducing tests in dynamic conditions in granular media. All parameters of impact used in this model have at first been calibrated by respecting mechanical and geometrical properties of the hammer and the rod. There is a good agreement between experimental results and the ones obtained from simulations in 2D or 3D. After creating a sample, we will simulate the Panda 3 ®. It is possible to measure directly the dynamic load–penetration curve occurring at the tip for each impact. Using the force and acceleration measured in the top part of the rod, it is possible to separate the incident and reflected waves and then calculate the tip’s load-penetration curve. The load–penetration curve obtained is qualitatively similar with that obtained by experimental tests. In addition, the frequency analysis of the measured signals present also a good compliance with that measured in reality when the tip resistance is qualitatively similar.

  11. Penetration Testing of the OPRA Regolith Penetrator

    Science.gov (United States)

    El Shafie, A.; Kegege, O.; Barrows, S.; Roe, L.; Ulrich, R.

    2008-03-01

    Our work focuses on the mechanical design and penetration forces for the Optical Probe for Regolith Analysis. This is a spike-shaped probe delivered to a planet, asteroid, or cometary body by a lander to provide IR spectroscopy of the subsurface.

  12. Penetration Testing in Wireless Networks

    OpenAIRE

    Lamichhane, Shree

    2017-01-01

    This thesis illustrates the security measures and mechanisms behind the encryption and decryption of data while transmitting data in a wireless network. Furthermore, this thesis describes and demonstrates several security threats in a wireless network that are widely experienced. It also explains shortly the evolution of the widely implemented IEEE 802.11 standard and its amendments. Kali Linux tools were used to perform a penetration test in a WPA secured test network. In-formation on th...

  13. A Scalable and Dynamic Testbed for Conducting Penetration-Test Training in a Laboratory Environment

    Science.gov (United States)

    2015-03-01

    identifying vulnerabilities: reverse engineering, debugging, and fuzz testing. Publicly known exploits are also available from online databases such...settings, as either of the DHCP server may respond (causing a race condition). For this reason, we configured the router DHCP services to respond...attacker advertises their MAC address as the default gateway. In this case, the gateway is using the first available IP address in the subnetwork

  14. Network Penetration Testing and Research

    Science.gov (United States)

    Murphy, Brandon F.

    2013-01-01

    This paper will focus the on research and testing done on penetrating a network for security purposes. This research will provide the IT security office new methods of attacks across and against a company's network as well as introduce them to new platforms and software that can be used to better assist with protecting against such attacks. Throughout this paper testing and research has been done on two different Linux based operating systems, for attacking and compromising a Windows based host computer. Backtrack 5 and BlackBuntu (Linux based penetration testing operating systems) are two different "attacker'' computers that will attempt to plant viruses and or NASA USRP - Internship Final Report exploits on a host Windows 7 operating system, as well as try to retrieve information from the host. On each Linux OS (Backtrack 5 and BlackBuntu) there is penetration testing software which provides the necessary tools to create exploits that can compromise a windows system as well as other operating systems. This paper will focus on two main methods of deploying exploits 1 onto a host computer in order to retrieve information from a compromised system. One method of deployment for an exploit that was tested is known as a "social engineering" exploit. This type of method requires interaction from unsuspecting user. With this user interaction, a deployed exploit may allow a malicious user to gain access to the unsuspecting user's computer as well as the network that such computer is connected to. Due to more advance security setting and antivirus protection and detection, this method is easily identified and defended against. The second method of exploit deployment is the method mainly focused upon within this paper. This method required extensive research on the best way to compromise a security enabled protected network. Once a network has been compromised, then any and all devices connected to such network has the potential to be compromised as well. With a compromised

  15. Penetration Testing: A Roadmap to Network Security

    OpenAIRE

    2009-01-01

    Network penetration testing identifies the exploits and vulnerabilities those exist within computer network infrastructure and help to confirm the security measures. The objective of this paper is to explain methodology and methods behind penetration testing and illustrate remedies over it, which will provide substantial value for network security Penetration testing should model real world attacks as closely as possible. An authorized and scheduled penetration testing will probably detected ...

  16. Penetration Testing: A Roadmap to Network Security

    CERN Document Server

    Naik, Nitin A; Khamitkar, Santosh D; Kalyankar, Namdeo V

    2009-01-01

    Network penetration testing identifies the exploits and vulnerabilities those exist within computer network infrastructure and help to confirm the security measures. The objective of this paper is to explain methodology and methods behind penetration testing and illustrate remedies over it, which will provide substantial value for network security Penetration testing should model real world attacks as closely as possible. An authorized and scheduled penetration testing will probably detected by IDS (Intrusion Detection System). Network penetration testing is done by either or manual automated tools. Penetration test can gather evidence of vulnerability in the network. Successful testing provides indisputable evidence of the problem as well as starting point for prioritizing remediation. Penetration testing focuses on high severity vulnerabilities and there are no false positive.

  17. Kali Linux wireless penetration testing essentials

    CERN Document Server

    Alamanni, Marco

    2015-01-01

    This book is targeted at information security professionals, penetration testers and network/system administrators who want to get started with wireless penetration testing. No prior experience with Kali Linux and wireless penetration testing is required, but familiarity with Linux and basic networking concepts is recommended.

  18. Ethical Dilemmas and Dimensions in Penetration Testing

    OpenAIRE

    Faily, Sharmal; McAlaney, John; Iacob, C

    2015-01-01

    Penetration testers are required to attack systems to evaluate their security, but without engaging in unethical behaviour while doing so. Despite work on hacker values and studies into security practice, there is little literature devoted to the ethical pressures associated with penetration testing. This paper presents several ethical dilemmas and dimensions associated with penetration testing;\\ud these shed light on the ethical positions taken by Penetration testers, and help identify poten...

  19. Web penetration testing with Kali Linux

    CERN Document Server

    Muniz, Joseph

    2013-01-01

    Web Penetration Testing with Kali Linux contains various penetration testing methods using BackTrack that will be used by the reader. It contains clear step-by-step instructions with lot of screenshots. It is written in an easy to understand language which will further simplify the understanding for the user.""Web Penetration Testing with Kali Linux"" is ideal for anyone who is interested in learning how to become a penetration tester. It will also help the users who are new to Kali Linux and want to learn the features and differences in Kali versus Backtrack, and seasoned penetration testers

  20. In-place HEPA filter penetration test

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Elliott, J. [Lawrence Livermore National Lab., CA (United States)] [and others

    1997-08-01

    We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

  1. Ethical hacking and penetration testing guide

    CERN Document Server

    Baloch, Rafay

    2014-01-01

    Requiring no prior hacking experience, Ethical Hacking and Penetration Testing Guide supplies a complete introduction to the steps required to complete a penetration test, or ethical hack, from beginning to end. You will learn how to properly utilize and interpret the results of modern-day hacking tools, which are required to complete a penetration test. The book covers a wide range of tools, including Backtrack Linux, Google reconnaissance, MetaGooFil, dig, Nmap, Nessus, Metasploit, Fast Track Autopwn, Netcat, and Hacker Defender rootkit. Supplying a simple and clean explanation of how to effectively utilize these tools, it details a four-step methodology for conducting an effective penetration test or hack.Providing an accessible introduction to penetration testing and hacking, the book supplies you with a fundamental understanding of offensive security. After completing the book you will be prepared to take on in-depth and advanced topics in hacking and penetration testing. The book walks you through each ...

  2. Quantitative penetration testing with item response theory

    NARCIS (Netherlands)

    Arnold, Florian; Pieters, Wolter; Stoelinga, Mariëlle

    2014-01-01

    Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Thus, penetration testing has so far been used as a qualitative research method. To enable quantitative approaches to security risk management, including

  3. Quantitative penetration testing with item response theory

    NARCIS (Netherlands)

    Pieters, W.; Arnold, F.; Stoelinga, M.I.A.

    2013-01-01

    Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Therefore, penetration testing has thus far been used as a qualitative research method. To enable quantitative approaches to security risk management, in

  4. Quantitative penetration testing with item response theory

    NARCIS (Netherlands)

    Arnold, Florian; Pieters, Wolter; Stoelinga, Mariëlle

    2013-01-01

    Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Thus, penetration testing has so far been used as a qualitative research method. To enable quantitative approaches to security risk management, including

  5. Penetration testing with Raspberry Pi

    CERN Document Server

    Muniz, Joseph

    2015-01-01

    If you are looking for a low budget, small form-factor remotely accessible hacking tool, then the concepts in this book are ideal for you. If you are a penetration tester who wants to save on travel costs by placing a low-cost node on a target network, you will save thousands by using the methods covered in this book. You do not have to be a skilled hacker or programmer to use this book. It will be beneficial to have some networking experience; however, it is not required to follow the concepts covered in this book.

  6. Sub-microsecond vapor plume dynamics under different keyhole penetration regimes in deep penetration laser welding

    Science.gov (United States)

    Chen, Xin; Pang, Shengyong; Shao, Xinyu; Wang, Chunming; Zhang, Xiaosi; Jiang, Ping; Xiao, Jianzhong

    2017-05-01

    It is well-known that distinct vapor plume dynamics occur during deep penetration laser welding under different keyhole penetration states. However, there is little knowledge about the physical characteristics of vapor plumes (velocity, pressure, flow patterns, etc) located inside transient keyholes of varying penetration regimes in laser welding. This lack of knowledge is primarily because mesoscale vapor plumes are highly dynamic and generally invisible. Based on a well-tested three-dimensional multiphase laser welding model, we conducted a computational study on vapor plume dynamics inside transient keyholes during the fiber laser welding of 304 austenite stainless steel as a function of keyhole penetration regimes. We observed three keyhole regimes of penetration: full penetration, partial penetration and no penetration. We then physically analyzed the vapor plumes in these regimes. We determined that the vapor plume velocities and pressures in all three regimes were uneven and oscillated following the dynamic keyhole with a characteristic timescale in sub-microseconds. Only when the keyhole approached the full penetration regime did vapor plumes begin to violently eject from the bottom of the keyhole opening, whereas in the partial penetration regime, even when the bottom part of the keyhole was open, most of the vapor plume ejected from the upper keyhole opening. This latter observation was similar to that in the no penetration mode. We studied the physical mechanism of this behavior by analyzing the keyhole temperature and vapor plume velocity distributions. We determined that the upward ejection of the vapor plume from the upper keyhole opening was the result of an uneven micro-meter scale boiling phenomenon of the transient keyhole governed by Fresnel absorptions dependent on the local inclination angle of the keyhole wall. Similarly, we determined that the ejection of the vapor plume from the bottom of the keyhole opening resulted from pressure

  7. Kali Linux wireless penetration testing beginner's guide

    CERN Document Server

    Ramachandran, Vivek

    2015-01-01

    If you are a security professional, pentester, or anyone interested in getting to grips with wireless penetration testing, this is the book for you. Some familiarity with Kali Linux and wireless concepts is beneficial.

  8. Field Cone Penetration Tests with Various Penetration Rates - Test Results

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    The test site is located at Nordre Ringgade near the town called Dronninglund in the northern Jutland in Denmark. The site area is relatively flat, and was chosen because it has a size of approximately 3 ha and contains a relatively thick deposit of silty soils. Furthermore the groundwater...... was encountered at approximately 0.2-0.6 m below the ground level. The soil stratigraphy of the test site was before test start identified by geotechnical borings results. The geotechnical borings indicated that the site contains of sandy silt with clay stripes from approx. 4.0 to 10 m. In the top the silty soil...... is very sandy with few clay stripes, and gradually the clay stripes increases wherefore the soil from approx. 10 m contains of clay with sandy silt stripes. Large soil sample was also collected from the test site in order to determine basic soil properties in the laboratory....

  9. Penetration Dynamics of Earth Penetration Warhead into Composite Target Media

    Directory of Open Access Journals (Sweden)

    P. K. Roy

    1987-07-01

    Full Text Available Attempts have been made to develop a suitable computer code that can find solutions to the axi-symmetric penetration of an Earth Penetrating Warhead yielding complete space-time histories of the resistive force offered by the target medium. The consequent warhead deceleration and velocity reduction, the resulting axial compressive stress developed in warhead casing as the penetration process progresses into the composite target media consisting of hard concrete of specified thickness followed by earth soil have been discussed.

  10. Penetration testing using mobile devices

    CSIR Research Space (South Africa)

    Shelembe, S

    2012-10-01

    Full Text Available reliable, it was used in the early 90s ? Disadvantage: ? Fixed workstations ? PCs need larger space ? PC set-up time ? Not easy to hide ? Lack portability ? CSIR 2012 Slide 5 Traditional pen-testing is not complete - why? ? Banning laptops... is not enough, cell-phones can hack too ? Pocket sized device is more convenient, since it is easy to carry around at anytime ? A power plug is not innocent, need to look for activity other than just traditional PCs / devices ? CSIR 2012 Slide 6 Mobile...

  11. Wireless Network Penetration Testing and Security Auditing

    Directory of Open Access Journals (Sweden)

    Wang Shao-Long

    2016-01-01

    Full Text Available IEEE802.11 wireless wireless networks have security issues that are vulnerable to a variety of attacks. Due to using radio to transport data, attackers can bypass firewalls, sniff sensitive information, intercept packets and send malicious packets. Security auditing and penetration testing is expected to ensure wireless networks security. The contributions of this work are analyzed the vulnerability and types of attacks pertaining to IEEE 802.11 WLAN, performed well known attacks in a laboratory environment to conduct penetration tests to confirm whether our wireless network is hackable or not. WAIDPS is configured as auditing tool to view wireless attacks, such as WEP/WPA/WPA2 cracking, rouge access points, denial of service attack. WAIDPS is designed to detect wireless intrusion with additional features. Penetration testing and auditing will mitigate the risk and threatening to protect WALN.

  12. Improving Web Application Security Using Penetration Testing

    Directory of Open Access Journals (Sweden)

    D. SriNithi

    2014-08-01

    Full Text Available The main issues of current web application is easily hacking the user information by unauthorized person. The development of entire web application depends on scripting languages that easily displays the user authentication code to the web browser. All code must be transferred through query string parameter (URL of the web application. This kind of application security fails when verifying it by penetration testing which is based on XSS languages. This study overcomes the security issues by developing a web application based on cross site scripting technique which the user codes are encrypted using RSA algorithm and cookies, cross domain verification based on encrypted use code. XSS vulnerabilities come in different forms and may be categorized into two varieties: reflected and stored. Reflected is on type of attack which can be performed against applications that employ a dynamic page error message to users. Stored XSS vulnerability appears when data submitted by one user is store in the application or in the back-end database. The user cookies of the web browser store only the encrypted key values. These techniques applied in Enterprise web application it support multiple organization for processing product purchase order, sales order and invoice details.

  13. The Basics of Hacking and Penetration Testing Ethical Hacking and Penetration Testing Made Easy

    CERN Document Server

    Engebretson, Patrick

    2011-01-01

    The Basics of Hacking and Penetration Testing serves as an introduction to the steps required to complete a penetration test or perform an ethical hack. You learn how to properly utilize and interpret the results of modern day hacking tools; which are required to complete a penetration test. Tool coverage will include, Backtrack Linux, Google, Whois, Nmap, Nessus, Metasploit, Netcat, Netbus, and more. A simple and clean explanation of how to utilize these tools will allow you  to gain a solid understanding of each of the four phases and prepare them to take on more in-depth texts and topi

  14. Two methodologies for physical penetration testing using social engineering

    NARCIS (Netherlands)

    Dimkov, Trajce; Pieters, Wolter; Hartel, Pieter

    2010-01-01

    Penetration tests on IT systems are sometimes coupled with physical penetration tests and social engineering. In physical penetration tests where social engineering is allowed, the penetration tester directly interacts with the employees. These interactions are usually based on deception and if not

  15. Engineering and Design: Standard Penetration Test

    Science.gov (United States)

    2007-11-02

    Penetration TestDe Contract Number Grant Number Program Element Number Author(s) Project Number Task Number Work Unit Number Performing Organization Name...jsfi I I US* of drlXXi~ mucl -r*ueusiog In I Decrm8e8 hcrea8ea Zither Increases Increases Increeses Decrea8es lncreeaes Increases Increeaes Zither &creases DecrU8e* nem8*s hcruses Xnt-ses tieee Utber k~ee Enclosure 2

  16. Penetration Testing Curriculum Development in Practice

    Directory of Open Access Journals (Sweden)

    Chengcheng Li

    2015-04-01

    Full Text Available As both the frequency and the severity of network breaches have increased in recent years, it is essential that cybersecurity is incorporated into the core of business operations. Evidence from the U.S. Bureau of Labor Statistics (Bureau of Labor Statistics, 2012 indicates that there is, and will continue to be, a severe shortage of cybersecurity professionals nationwide throughout the next decade. To fill this job shortage we need a workforce with strong hands-on experience in the latest technologies and software tools to catch up with the rapid evolution of network technologies. It is vital that the IT professionals possess up-to-date technical skills and think and act one step ahead of the cyber criminals who are constantly probing and exploring system vulnerabilities. There is no perfect security mechanism that can defeat all the cyber-attacks; the traditional defensive security mechanism will eventually fail to the pervasive zero-day attacks. However, there are steps to follow to reduce an organization’s vulnerability to cyber-attacks and to mitigate damages. Active security tests of the network from a cyber-criminal’s perspective can identify system vulnerabilities that may lead to future breaches. “If you know yourself but not the enemy, for every victory gained you will also suffer a defeat. But if you know the enemy and know yourself, you need not fear the result of hundred battles” (Sun, 2013. Penetration testing is a discipline within cybersecurity that focuses on identifying and exploiting the vulnerabilities of a network, eventually obtaining access to the critical business information. The pentesters, the security professionals who perform penetration testing, or ethical hackers, break the triad of information security - Confidentiality, Integrity, and Accountability (CIA - as if they were a cyber-criminal. The purpose of ethical hacking or penetration testing is to know what the “enemy” can do and then generate a

  17. Kali Linux assuring security by penetration testing

    CERN Document Server

    Ali, Shakeel; Allen, Lee

    2014-01-01

    Written as an interactive tutorial, this book covers the core of Kali Linux with real-world examples and step-by-step instructions to provide professional guidelines and recommendations for you. The book is designed in a simple and intuitive manner that allows you to explore the whole Kali Linux testing process or study parts of it individually.If you are an IT security professional who has a basic knowledge of Unix/Linux operating systems, including an awareness of information security factors, and want to use Kali Linux for penetration testing, then this book is for you.

  18. Hacking with Kali practical penetration testing techniques

    CERN Document Server

    Broad, James

    2013-01-01

    Hacking with Kali introduces you the most current distribution of the de facto standard tool for Linux pen testing. Starting with use of the Kali live CD and progressing through installation on hard drives, thumb drives and SD cards, author James Broad walks you through creating a custom version of the Kali live distribution. You'll learn how to configure networking components, storage devices and system services such as DHCP and web services. Once you're familiar with the basic components of the software, you'll learn how to use Kali through the phases of the penetration testing lifecycle

  19. Mastering Kali Linux for advanced penetration testing

    CERN Document Server

    Beggs, Robert W

    2014-01-01

    This book provides an overview of the kill chain approach to penetration testing, and then focuses on using Kali Linux to provide examples of how this methodology is applied in the real world. After describing the underlying concepts, step-by-step examples are provided that use selected tools to demonstrate the techniques. If you are an IT professional or a security consultant who wants to maximize the success of your network testing using some of the advanced features of Kali Linux, then this book is for you. This book will teach you how to become an expert in the pre-engagement, management,

  20. Results of the mole penetration tests in different materials

    Science.gov (United States)

    Wawrzaszek, Roman; Seweryn, Karol; Grygorczuk, Jerzy; Banaszkiewicz, Marek; Rybus, Tomasz; Wisniewski, Lukasz; Neal, Clive R.; Huang, Shaopeng

    2010-05-01

    Mole devices are low velocity, medium to high energy, self-driven penetrators, designed as a carrier of different sensors for in situ investigations of subsurface layers of planetary bodies. The maximum insertion depth of such devices is limited by energy of single mole's stroke and soil resistance for the dynamic penetration. A mole penetrator ‘KRET' has been designed, developed, and successfully tested at Space Research Centre PAS in Poland. The principle of operation of the mole bases on the interaction between three masses: the cylindrical casing, the hammer, and the rest of the mass, acting as a support mass. This approach takes advantage of the MUPUS penetrator (a payload of Philae lander on Rosetta mission) insertion tests knowledge. Main parameters of the mole KRET are listed below: - outer diameter: 20.4mm, - length: 330mm, - total mass: 488g, - energy of the driving spring: 2.2J, - average power consumption: 0.28W, - average insertion progress/stroke: 8.5mm, The present works of Space Research Center PAS team are focused on three different activities. First one includes investigations of the mole penetration effectiveness in the lunar analogues (supported by ESA PECS project). Second activity, supported by Polish national fund, is connected with numerical calculation of the heat flow investigations and designing and developing the Heat Flow Probe Hardware Component (HPHC) for L-GIP NASA project. It's worth noting that L-GIP project refers to ILN activity. Last activity focuses on preparing the second version of the mole ready to work in low thermal and pressure conditions. Progress of a mole penetrator in granular medium depends on the mechanical properties of this medium. The mole penetrator ‘KRET' was tested in different materials: dry quartz sand (0.3 - 0.8 grain size), wet quartz sand, wheat flour and lunar regolith mechanical simulant - Chemically Enhanced OB-1 (CHENOBI). Wheat flour was selected due to its high cohesion rate and small grain size

  1. Respirator Testing Using Virus Aerosol: Comparison between Viability Penetration and Physical Penetration.

    Science.gov (United States)

    Zuo, Zhili; Kuehn, Thomas H; Pui, David Y H

    2015-07-01

    Viability, fluorescence (particle volume), photometric, viral RNA, and particle number penetration of MS2 bacteriophage through filter media used in three different models of respirators were compared to better understand the correlation between viability and physical penetration. Although viability and viral RNA penetration were better represented by particle volume penetration than particle number penetration, they were several-fold lower than photometric penetration, which was partially due to the difference in virus survival between upstream and downstream aerosol samples. Results suggest that the current NIOSH photometer-based test method can be used as a quick means to roughly differentiate respirators with different performance against virus aerosols.

  2. Penetration Testing Professional Ethics: a conceptual model and taxonomy

    OpenAIRE

    Justin Pierce; Ashley Jones; Matthew Warren

    2006-01-01

    In an environment where commercial software is continually patched to correct security flaws, penetration testing can provide organisations with a realistic assessment of their security posture. Penetration testing uses the same principles as criminal hackers to penetrate corporate networks and thereby verify the presence of software vulnerabilities. Network administrators can use the results of a penetration test to correct flaws and improve overall security. The use of hacking techniques...

  3. Severe accident testing of electrical penetration assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Clauss, D.B. (Sandia National Labs., Albuquerque, NM (USA))

    1989-11-01

    This report describes the results of tests conducted on three different designs of full-size electrical penetration assemblies (EPAs) that are used in the containment buildings of nuclear power plants. The objective of the tests was to evaluate the behavior of the EPAs under simulated severe accident conditions using steam at elevated temperature and pressure. Leakage, temperature, and cable insulation resistance were monitored throughout the tests. Nuclear-qualified EPAs were produced from D. G. O'Brien, Westinghouse, and Conax. Severe-accident-sequence analysis was used to generate the severe accident conditions (SAC) for a large dry pressurized-water reactor (PWR), a boiling-water reactor (BWR) Mark I drywell, and a BWR Mark III wetwell. Based on a survey conducted by Sandia, each EPA was matched with the severe accident conditions for a specific reactor type. This included the type of containment that a particular EPA design was used in most frequently. Thus, the D. G. O'Brien EPA was chosen for the PWR SAC test, the Westinghouse was chosen for the Mark III test, and the Conax was chosen for the Mark I test. The EPAs were radiation and thermal aged to simulate the effects of a 40-year service life and loss-of-coolant accident (LOCA) before the SAC tests were conducted. The design, test preparations, conduct of the severe accident test, experimental results, posttest observations, and conclusions about the integrity and electrical performance of each EPA tested in this program are described in this report. In general, the leak integrity of the EPAs tested in this program was not compromised by severe accident loads. However, there was significant degradation in the insulation resistance of the cables, which could affect the electrical performance of equipment and devices inside containment at some point during the progression of a severe accident. 10 refs., 165 figs., 16 tabs.

  4. A Mass Loss Penetration Model to Investigate the Dynamic Response of a Projectile Penetrating Concrete considering Mass Abrasion

    OpenAIRE

    NianSong Zhang; Dong; Wang; Bei Peng; Yong He

    2015-01-01

    A study on the dynamic response of a projectile penetrating concrete is conducted. The evolutional process of projectile mass loss and the effect of mass loss on penetration resistance are investigated using theoretical methods. A projectile penetration model considering projectile mass loss is established in three stages, namely, cratering phase, mass loss penetration phase, and remainder rigid projectile penetration phase.

  5. Penetration Testing Professional Ethics: a conceptual model and taxonomy

    Directory of Open Access Journals (Sweden)

    Justin Pierce

    2006-05-01

    Full Text Available In an environment where commercial software is continually patched to correct security flaws, penetration testing can provide organisations with a realistic assessment of their security posture. Penetration testing uses the same principles as criminal hackers to penetrate corporate networks and thereby verify the presence of software vulnerabilities. Network administrators can use the results of a penetration test to correct flaws and improve overall security. The use of hacking techniques, however, raises several ethical questions that centre on the integrity of the tester to maintain professional distance and uphold the profession. This paper discusses the ethics of penetration testing and presents our conceptual model and revised taxonomy.

  6. Building virtual pentesting labs for advanced penetration testing

    CERN Document Server

    Cardwell, Kevin

    2014-01-01

    Written in an easy-to-follow approach using hands-on examples, this book helps you create virtual environments for advanced penetration testing, enabling you to build a multi-layered architecture to include firewalls, IDS/IPS, web application firewalls, and endpoint protection, which is essential in the penetration testing world. If you are a penetration tester, security consultant, security test engineer, or analyst who wants to practice and perfect penetration testing skills by building virtual pen testing labs in varying industry scenarios, this is the book for you. This book is ideal if yo

  7. Penetration testing protecting networks and systems

    CERN Document Server

    Henry, Kevin M

    2012-01-01

    This book is a preparation guide for the CPTE examination, yet is also a general reference for experienced penetration testers, ethical hackers, auditors, security personnel and anyone else involved in the security of an organization's computer systems.

  8. Hacking and penetration testing with low power devices

    CERN Document Server

    Polstra, Philip

    2014-01-01

    Hacking and Penetration Testing with Low Power Devices shows you how to perform penetration tests using small, low-powered devices that are easily hidden and may be battery-powered. It shows how to use an army of devices, costing less than you might spend on a laptop, from distances of a mile or more. Hacking and Penetration Testing with Low Power Devices shows how to use devices running a version of The Deck, a full-featured penetration testing and forensics Linux distribution, and can run for days or weeks on batteries due to their low power consumption. Author Philip Polstra shows how to

  9. Standard Penetration Test and Relative Density

    Science.gov (United States)

    1971-02-01

    laboratorio ejecutados con un penetr6metro est’tico pequeno. INTRODUCTION One of the main problems encountered in subsoil e’xploration is in situ...would be more valid. REFERENCES Burmister, D. M. �), "The Grading-Density Relation of Gr•anular Materials ." Proc,.edings of the American Society for...Reclamation (1953), "Second Progress Report of Re- search of the Penetration Resistance Method of Subsurface Explora- tion," Report No. EM-356. Design and Construction Division, Earth Materials Laboratory, Denver,

  10. Quantitative Penetration Testing with Item Response Theory (extended version)

    NARCIS (Netherlands)

    Arnold, F.; Pieters, W.; Stoelinga, M.I.A.

    2013-01-01

    Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Thus, penetration testing has so far been used as a qualitative research method. To enable quantitative approaches to security risk management, including

  11. Quantitative penetration testing with item response theory (extended version)

    NARCIS (Netherlands)

    Arnold, Florian; Pieters, Wolter; Stoelinga, Mariëlle

    2013-01-01

    Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Therefore, penetration testing has thus far been used as a qualitative research method. To enable quantitative approaches to security risk management, in

  12. The Impact of IPv6 on Penetration Testing

    NARCIS (Netherlands)

    Ottow, Christiaan; Vliet, van Frank; Boer, de Pieter-Tjerk; Pras, Aiko

    2012-01-01

    In this paper we discuss the impact the use of IPv6 has on remote penetration testing of servers and web applications. Several modifications to the penetration testing process are proposed to accommodate IPv6. Among these modifications are ways of performing fragmentation attacks, host discovery and

  13. Two methodologies for physical penetration testing using social engineering

    NARCIS (Netherlands)

    Dimkov, Trajce; Pieters, Wolter; Hartel, Pieter

    2009-01-01

    During a penetration test on the physical security of an organization, if social engineering is used, the penetration tester directly interacts with the employees. These interactions are usually based on deception and if not done properly can upset the employees, violate their privacy or damage thei

  14. Mastering wireless penetration testing for highly secured environments

    CERN Document Server

    Johns, Aaron

    2015-01-01

    This book is intended for security professionals who want to enhance their wireless penetration testing skills and knowledge. Since this book covers advanced techniques, you will need some previous experience in computer security and networking.

  15. Contrast and glare testing in keratoconus and after penetrating keratoplasty

    National Research Council Canada - National Science Library

    Pesudovs, K; Schoneveld, P; Seto, R J; Coster, D J

    2004-01-01

    To compare the performance of keratoconus, penetrating keratoplasty (PK), and control subjects on clinical tests of contrast and glare vision, to determine whether differences in vision were independent of visual acuity (VA...

  16. 重型动力触探在振冲施工质量控制及检测中的应用%Application of Heavy Dynamic Penetration in the Quality Control of Vibro Stone Column Construction and the Testing

    Institute of Scientific and Technical Information of China (English)

    李庆跃; 李晓力; 肖普

    2013-01-01

      振冲复合地基以其低成本、高效率等优势已经广泛的应用于水利水电、火电、工民建、石化、交通、市政、铁路等行业的地基处理中。振冲进行地基处理的规模和速度日新月异,使得施工过程中的质量控制变得非常重要。通过对重型动力触探在振冲碎石桩工程中的应用,论述了重型动力触探在振冲施工质量控制及检测中的重要性及适用性,并总结了其在工程中的应用经验。%With the advantages of low cost and high efficiency, vibrated composite foundation has been widely used in water conservancy and hydropower, thermal power, civil engineering fitting, petrochemical, transportation, municipal, railways and other industries.The construction quality control becomes very important.By the application of heavy dynamic penetra-tion in the vibro stone column project, the paper discusses the significance and applicability of heavy dynamic penetration in quality control and the testing of vibro stone column, and sums up the experiences.

  17. The cone penetration test in unsaturated silty sands

    Directory of Open Access Journals (Sweden)

    Yang Hongwei

    2016-01-01

    Full Text Available Very little is known about how to interpret the cone penetration test (CPT when performed in unsaturated soils. The few published studies on the CPT in unsaturated soils have focused on either clean sands or a silt. In this study new results of laboratory-controlled CPTs in an unsaturated silty sand are presented. The silty sand exhibits hydraulic hysteresis and suction hardening. Suction is observed to have a pronounced affect on measured cone penetration resistance. For an isotropic net confining stress of 60 kPa it is observed that higher suctions give rise to cone penetration resistances that are 50% larger than those for lower suctions. A semi-theoretical correlation is presented that links measured cone penetration resistances to initial relative density and mean effective stress. For this silty sand it is shown that failing to account for suction may result in significant overestimations and unsafe predictions of soil properties from measured cone penetration resistances.

  18. Molecular dynamics simulations of ballistic He penetration into W fuzz

    Science.gov (United States)

    Klaver, T. P. C.; Nordlund, K.; Morgan, T. W.; Westerhof, E.; Thijsse, B. J.; van de Sanden, M. C. M.

    2016-12-01

    Results are presented of large-scale Molecular Dynamics simulations of low-energy He bombardment of W nanorods, or so-called ‘fuzz’ structures. The goal of these simulations is to see if ballistic He penetration through W fuzz offers a more realistic scenario for how He moves through fuzz layers than He diffusion through fuzz nanorods. Instead of trying to grow a fuzz layer starting from a flat piece of bulk W, a new approach of creating a fully formed fuzz structure 0.43 µm thick out of ellipsoidal pieces of W is employed. Lack of detailed experimental knowledge of the 3D structure of fuzz is dealt with by simulating He bombardment on five different structures of 15 vol% W and determining the variation in He penetration for each case. The results show that by far the most important factor determining He penetration is the amount of open channels through which He ions can travel unimpeded. For a more or less even W density distribution He penetration into fuzz falls off exponentially with distance and can thus be described by a ‘half depth’. In a 15 vol% fuzz structure, the half depth can reach 0.18 µm. In the far sparser fuzz structures that were recently reported, the half depth might be 1 µm or more. This means that ballistic He penetration offers a more likely scenario than He diffusion through nanorods for how He moves through fuzz and may provide an adequate explanation for how He penetrates through the thickest fuzz layers reported so far. Furthermore, the exponential decrease in penetration with depth would follow a logarithmic dependence on fluence which is compatible with experiments. A comparison of these results and molecular dynamics calculations carried out in the recoil interaction approximation shows that results for W fuzz are qualitatively very different from conventional stopping power calculations on W with a similarly low but homogeneous density distribution.

  19. Numerical simulation of high-speed penetration-perforation dynamics in layered armor shields

    CERN Document Server

    Ayzenberg-Stepanenko, Mark

    2012-01-01

    Penetration models and calculating algorithms are presented, describing the dynamics and fracture of composite armor shields penetrated by high-speed small arms. A shield considered consists of hard (metal or ceramic) facing and multilayered fabric backing. A simple formula is proved for the projectile residual velocity after perforation of a thin facing. A new plastic-flow jet model is proposed for calculating penetration dynamics in the case of a thick facing of ceramic or metal-ceramic FGM materials. By bringing together the developed models into a calculating algorithm, a computer tool is designed enabling simulations of penetration processes in the above-mentioned shields and analysis of optimization problems. Some results of computer simulation are presented. It is revealed in particular that strength proof of pliable backing can be better as compared with more rigid backing. Comparison of calculations and test data shows sufficient applicability of the models and the tool.

  20. Dynamics of resonant magnetic field penetration and plasma rotation

    Science.gov (United States)

    Ivanov, N. V.; Kakurin, A. M.

    2017-01-01

    Results of calculations and analysis of the penetration of resonant magnetic perturbations (RMP) into tokamak plasma are presented. The TEAR code used for the calculations is based on a two-fluid magnetohydrodynamics approximation that gives coupled diffusion-type equations for the magnetic flux perturbation and for plasma rotation velocities in toroidal and poloidal directions. The radial distribution of the magnetic flux perturbation is calculated taking account of an externally applied RMP and magnetic perturbation generated by an eddy current in the resistive-vacuum vessel. The decoupling of magnetic-island velocity from the velocity of plasma rotation is employed in the calculations according to available experimental evidence and corresponding theoretical understanding. The account of this decoupling, as well as of plasma rotation in the poloidal direction in addition to the toroidal one, reduces the RMP penetration threshold and accelerates the penetration process. The main attention is paid to the dependences of the RMP penetration dynamics on the simulation conditions. The simulation findings are compared with available experimental data. Some predictions of the penetration threshold values for ITER conditions are presented.

  1. Cone Penetration Testing: A Sound Method for Urban Archaeological Prospection

    NARCIS (Netherlands)

    Koster, K.

    2015-01-01

    Cone Penetration Testing (CPT) is a geotechnical in situ site investigation method and is widely applied in urbanized areas of the Netherlands. Approximately 20,000 CPTs are conducted in the Netherlands each year. The frequency of such testing, and the presence of archaeological deposits within the

  2. New model describing the dynamical behaviour of penetration rates

    Science.gov (United States)

    Tashiro, Tohru; Minagawa, Hiroe; Chiba, Michiko

    2013-02-01

    We propose a hierarchical logistic equation as a model to describe the dynamical behaviour of a penetration rate of a prevalent stuff. In this model, a memory, how many people who already possess it a person who does not process it yet met, is considered, which does not exist in the logistic model. As an application, we apply this model to iPod sales data, and find that this model can approximate the data much better than the logistic equation.

  3. A comparison of FRP-sandwich penetrating impact test methods

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrand, M. [VTT Manufacturing Technology, Espoo (Finland). Maritime and Mechanical Engineering

    1996-12-31

    The main objective of this project is to identify the test methods which provide useful results for the different types of penetrating impacts occurring in sandwich structures. A series of penetrating impact tests on FRP-sandwich panels is performed using three different test methods and the results of the test methods are compared. The test methods used are the standardised method ISO 6603 and two non-standardised methods. The first non-standardised method uses a pyramid-shaped impactor instead of the cylindrical impactor used in the ISO 6603 method. In the second non-standardised method, the impact test is performed quasistatically using a cylindrical impactor. Possible stages of failure occurring in FRP-sandwich during a penetrating impact are illustrated. A comprehensive test method should be able to provoke various failure modes, as observed in impact failures of actual sandwich structures. The results obtained with the three test methods lead to a different ranking in impact strength of the panels. Hence, impact test results obtained with different test methods are not even qualitatively comparable. The pyramid-shaped impactor is able to generate clearly more failure modes than the cylindrical impactor in the ISO 6603 method. Therefore, it is considered to be of more practical value for determining the impact strength of PRP-sandwich structures. (orig.) (15 refs.)

  4. PETA: Methodology of Information Systems Security Penetration Testing

    Directory of Open Access Journals (Sweden)

    Tomáš Klíma

    2016-12-01

    Full Text Available Current methodologies of information systems penetration testing focuses mainly on a high level and technical description of the testing process. Unfortunately, there is no methodology focused primarily on the management of these tests. It often results in a situation when the tests are badly planned, managed and the vulnerabilities found are unsystematically remediated. The goal of this article is to present new methodology called PETA which is focused mainly on the management of penetration tests. Development of this methodology was based on the comparative analysis of current methodologies. New methodology incorporates current best practices of IT governance and project management represented by COBIT and PRINCE2 principles. Presented methodology has been quantitatively evaluated.

  5. A Novel Framework to Carry Out Cloud Penetration Test

    Directory of Open Access Journals (Sweden)

    Jianbin Hu

    2011-04-01

    Full Text Available in current cloud services, users put their data and resources into the cloud so as to enjoy the on-demand high quality applications and services. Different from the conventional services, users in cloud services lose control of their data which is instead manipulated by the large-scale cloud. Therefore, cloud service providers (CSP guarantee that the cloud which they provide is of high confidence in accuracy and integrity. Traditional penetration test is carried out manually and has low efficiency. In this paper, we propose FPTC, a novel framework of penetration test in cloud environment. In FPTC, there are managers, executors and toolkits. FPTC managers guide FPTC executors to gather information from the cloud environment, generate appropriate testing scenarios, run matched tools in the toolkit and collect test results to do evaluation. The capacity and quality of the toolkit is a key issue in FPTC. We develop a prototype in which FPTC is implemented and the experimental results show that FPTC is helpful to automatically carry out penetration test in cloud environment.

  6. Ninja hacking unconventional penetration testing tactics and techniques

    CERN Document Server

    Wilhelm, Thomas

    2010-01-01

    Ever thought of using the time-tested tactics and techniques of the ancient ninja to understand the mind of today's ninja, the hacker? As a penetration tester or security consultant you no doubt perform tests both externally and internally for your clients that include both physical and technical tests. Throw traditional pen testing methods out the window for now and see how thinking and acting like a ninja can actually grant you quicker and more complete access to a company's assets. Get in before the hacker does with these unorthodox techniques. Use all of the tools that the ninja has: di

  7. Interpretation of Seismic Cone Penetration Testing in Silty Soil

    DEFF Research Database (Denmark)

    Holmsgaard, Rikke; Ibsen, Lars Bo; Nielsen, Benjaminn Nordahl

    2016-01-01

    Five Seismic Cone Penetration Tests (SCPT) were conducted at a test site in northern Denmark where the subsoil consists primarily of sandy silt with clay bands. A portion of the test data were collected every 0.5 m to compare the efficacy of closely-spaced down-hole data collection on the computa......Five Seismic Cone Penetration Tests (SCPT) were conducted at a test site in northern Denmark where the subsoil consists primarily of sandy silt with clay bands. A portion of the test data were collected every 0.5 m to compare the efficacy of closely-spaced down-hole data collection...... on the computation of shear wave velocity. A minimum of eight seismic tests were completed at each depth in order to examine the reliability of shear wave velocity data, as well as to assess the impact of the time interval between CPT termination and seismic test initiation on SCPT results. The shear wave velocity...... increased the variability of the shear wave velocity and that time interval between seismic tests is insignificant. Correlation between shear wave velocity and cone resistance for silty soils were also determined and assessed relative to other published data on multiple soil types....

  8. Field Test Evaluation of Effect on Cone Resistance Caused by Change in Penetration Rate

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2012-01-01

    in Dronninglund where the subsoil primary consists of sandy silt. A total of 15 cone penetration tests with penetration rates varying from 60 to 0.5 mm/s and two geotechnical borings were conducted at the test site. Large soil samples were also collected from the test site in order to determine soil properties......This paper presents how a change in cone penetration rate affects the measured cone resistance during cone penetration testing in silty soils. Regardless of soil, type the standard rate of penetration is 20 mm/s and it is generally accepted that undrained penetration occurs in clay while drained...... penetration occurs in sand. In intermediate soils such as silty soils, the standard cone penetration rate may result in drainage conditions varying from undrained to partially or fully drained conditions. Field cone penetrations tests have been conducted with different penetration rates on a test site...

  9. Modeling the effect of dynamic surfaces on membrane penetration

    Science.gov (United States)

    van Lehn, Reid; Alexander-Katz, Alfredo

    2011-03-01

    The development of nanoscale materials for targeted drug delivery is an important current pursuit in materials science. One task of drug carriers is to release therapeutic agents within cells by bypassing the cell membrane to maximize the effectiveness of their payload and minimize bodily exposure. In this work, we use coarse-grained simulations to study nanoparticles (NPs) grafted with hydrophobic and hydrophilic ligands that rearrange in response to the amphiphilic lipid bilayer. We demonstrate that this dynamic surface permits the NP to spontaneously penetrate to the bilayer midplane when the surface ligands are near an order-disorder transition. We believe that this work will lead to the design of new drug carriers capable of non-specifically accessing cell interiors based solely on their dynamic surface properties. Our work is motivated by existing nanoscale systems such as micelles, or NPs grafted with highly mobile ligands or polymer brushes.

  10. Field Test Evaluation of Effect on Cone Resistance Caused by Change in Penetration Rate

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2012-01-01

    This paper presents how a change in cone penetration rate affects the measured cone resistance during cone penetration testing in silty soils. Regardless of soil, type the standard rate of penetration is 20 mm/s and it is generally accepted that undrained penetration occurs in clay while drained...... in the laboratory. A change in the measured cone resistance occurs by lowering the penetration rate. This is caused by the changes in drainage conditions. Compared to the normal penetration rate of 20 mm/s, this paper illustrates that lowering the penetration rate leads to an increase in the cone resistance from 1...

  11. Interpretation of Cone Penetration Testing in Silty Soils Conducted under Partially Drained Conditions

    DEFF Research Database (Denmark)

    Holmsgaard, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2016-01-01

    The standard penetration rate used in cone penetration tests (CPTs) is 20 mm=s, regardless of soil type, which yields fully drained penetration in sand and fully undrained penetration in clay. However, for silty soils that represent an intermediate grain size composition and unique characteristics...... compared with sand and clay, the standard rate of penetration results in partially drained penetration, often leading to misinterpretation of this soil type. In this study, 15 CPTs, with penetration rates varying from 0.5 to 60 mm=s, were performed at a test site in northern Denmark, where the subsoil...... consisted primarily of sandy silt with clay bands. The results illustrated that when the penetration rate is reduced, the cone resistance increases, but the pore pressure decreases. The transition between undrained and fully drained penetration was determined by converting the results into a normalized...

  12. Recent developments in dynamic testing of materials

    Directory of Open Access Journals (Sweden)

    Gilat Amos

    2015-01-01

    Full Text Available New techniques for dynamic characterization of materials that have been developed in the last three years (since the last DYMAT conference in 2012, and results from recent dynamic testing of Inconel 718 are presented. The first development is a dynamic punch test in which three dimensional Digital Image Correlation (DIC is used to measure the deformation of the rear surface of a specimen as it being penetrated. The second experimental technique that is under development is a dynamic tension experiment in which full-field strain measurement with DIC and full-field temperature measurement are done simultaneously during the test.

  13. Simple Numerical Model to Simulate Penetration Testing in Unsaturated Soils

    Directory of Open Access Journals (Sweden)

    Jarast S. Pegah

    2016-01-01

    Full Text Available Cone penetration test in unsaturated sand is modelled numerically using Finite Element Method. Simple elastic-perfectly plastic Mohr-Coulomb constitutive model is modified with an apparent cohesion to incorporate the effect of suction on cone resistance. The Arbitrary Lagrangian-Eulerian (ALE remeshing algorithm is also implemented to avoid mesh distortion problem due to the large deformation in the soil around the cone tip. The simulated models indicate that the cone resistance was increased consistently under higher suction or lower degree of saturation. Sensitivity analysis investigating the effect of input soil parameters on the cone tip resistance shows that unsaturated soil condition can be adequately modelled by incorporating the apparent cohesion concept. However, updating the soil stiffness by including a suction-dependent effective stress formula in Mohr-Coulomb material model does not influence the cone resistance significantly.

  14. Probabilistic liquefaction triggering based on the cone penetration test

    Science.gov (United States)

    Moss, R.E.S.; Seed, R.B.; Kayen, R.E.; Stewart, J.P.; Tokimatsu, K.

    2005-01-01

    Performance-based earthquake engineering requires a probabilistic treatment of potential failure modes in order to accurately quantify the overall stability of the system. This paper is a summary of the application portions of the probabilistic liquefaction triggering correlations proposed recently proposed by Moss and co-workers. To enable probabilistic treatment of liquefaction triggering, the variables comprising the seismic load and the liquefaction resistance were treated as inherently uncertain. Supporting data from an extensive Cone Penetration Test (CPT)-based liquefaction case history database were used to develop a probabilistic correlation. The methods used to measure the uncertainty of the load and resistance variables, how the interactions of these variables were treated using Bayesian updating, and how reliability analysis was applied to produce curves of equal probability of liquefaction are presented. The normalization for effective overburden stress, the magnitude correlated duration weighting factor, and the non-linear shear mass participation factor used are also discussed.

  15. Design, synthesis, and functional testing of recombinant cell penetrating peptides

    Science.gov (United States)

    Widyaningtyas, S. T.; Soebandrio, A.; Ibrahim, F.; Bela, B.

    2017-08-01

    Cell penetrating peptides (CPP) are one of the most attractive DNA delivery systems currently in development. In this research, in silico CPP development was performed based on a literature study to look for peptides that induce endosome escape, have the ability to bind DNA, and pass through cell membranes and/or nuclear membranes with a final goal of creating a new CPP to be used as a DNA delivery system. We report herein the successful isolation of three candidate CPP molecules, which have all been successfully expressed and purified by NiNTA. One of the determinants of CPP success as a DNA carrier is the ability of the CPP to bind and protect DNA from the effects of nucleases. The DNA binding test results show that all three CPPs can bind to DNA and protect it from the effects of serum nucleases. These three CPP candidates designed in silico and synthesized in the prokaryote system are eligible candidates for further testing of their ability to deliver DNA in vitro and in vivo.

  16. Applying Penetration Tests on a Highly Secured Cooperative Network

    Directory of Open Access Journals (Sweden)

    Qutaiba Ali

    2010-01-01

    Full Text Available Security plays a vital role in the design; development and practical use of the distributed computing environment,for greater availability and access to information in turn imply that distributed systems are more prone to attacks. The need forpractical solutions for secure networked system management is becoming increasingly significant. Any cooperative networkshould be supplied with different security techniques and tools. This paper deals with subjecting a highly secured cooperativenetwork to successive penetration tests. An experimental network is built to represent a typical layout for a cooperativenetwork and it is supplied with a variety of security techniques such as, Virtual Local Area Networks (VLAN, Virtual PrivateNetwork (VPN, Intrusion Detection System (IDS, Authentication, Authorization, and Accounting (AAA server, Secure ShellHeader (SSH, Access Control List (ACL, WLAN security Techniques and Network Address Translation (NAT. Our testsfocus on the evaluation of the importance of each security technique and the effect of their absence on the security level of thenetwork. This work could assist the future introduction of security evaluation matrices.

  17. Effect of Drainage Conditions on Cone Penetration Testing in Silty Soils

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2011-01-01

    This paper discusses the challenges that occur when performing Cone Penetration Tests (CPT) in silty soil due to changes in drainage conditions. In this paper, CPT results from various papers and researchers are collected and interpreted. Results from cone penetrations tests with various...... penetration rates is analysed, and it is shown how the changes in drainage condition, caused by the change in penetration rate, affects the plot in the soil classification charts. In addition, the effect on changes in penetration rate is compared for clay and silt, respectively, where the silty soil is more...... susceptible towards change in penetration rate. A normalized penetration rate is implemented in order to compare various cone resistance results, and hence investigate the changes from undrained to partially drained and from partially drained to fully drained....

  18. Penetration dynamics of a magnetic field pulse into high-? superconductors

    Science.gov (United States)

    Meerovich, V.; Sinder, M.; Sokolovsky, V.; Goren, S.; Jung, G.; Shter, G. E.; Grader, G. S.

    1996-12-01

    The penetration of a magnetic field pulse into a high-0953-2048/9/12/004/img9 superconducting plate is investigated experimentally and theoretically. It follows from our experiments that the threshold of penetration increases with increasing amplitude and/or decreasing duration of the applied pulse. The penetrating field continues to grow as the applied magnetic field decreases. The peculiarities observed are explained in the framework of the extended critical state model. It appears that the deviations from Bean's classical critical state model are characterized by a parameter equal to the square of the ratio of plate thickness to skin depth. The applicability of the classical critical state model is restricted by the condition that this parameter is much less than 1. This condition is also the criterion for the applicability of pulse methods of critical current measurements.

  19. Dynamic Testing of Gasifier Refractory

    Energy Technology Data Exchange (ETDEWEB)

    Michael D. Mann; Wayne S. Seames; Devdutt Shukla; Xi Hong; John P. Hurley

    2005-12-01

    The University of North Dakota (UND) Chemical Engineering Department in conjunction with the UND Energy & Environmental Research Center (EERC) have initiated a program to examine the combined chemical (reaction and phase change) and physical (erosion) effects experienced by refractory materials under slagging coal gasification conditions. The goal of this work is to devise a mechanism of refractory loss under these conditions. The controlled-atmospheric dynamic corrodent application furnace (CADCAF) was utilized to simulate refractory/slag interactions under dynamic conditions that more realistically simulate the environment in a slagging coal gasifier than any of the static tests used previously by refractory manufacturers and researchers. High-alumina and high-chromia refractory bricks were tested using slags obtained from two solid fuel gasifiers. Testing was performed at 1475 C in a reducing atmosphere (2% H{sub 2} in N{sub 2}) The CADCAF tests show that high-chrome refractories have greater corrosion resistance than high-aluminum refractories; coal slag readily diffuses into the refractory through its grain boundaries; the refractory grains are more stable than the matrix in the tests, and the grains are the first line of defense against corrosion; calcium and alkali in the slag are more corrosive than iron; and silicon and calcium penetrate the deepest into the refractory. The results obtained from this study are preliminary and should be combined with result from other research programs. In particular, the refractory corrosion results from this study should be compared with refractories removed from commercial gasifiers.

  20. Experimental study on simulation test instrument and its penetration performance of soil infiltration clogging

    Institute of Scientific and Technical Information of China (English)

    LÜ Jinzhi; YANG Zhishuang; LI Pengfei

    2016-01-01

    The three-dimensional seepage simulation test device for siltation dam foundation soil is a multifunc-tional penetration instrument which is designed for the simulation of infiltration clogging,seepage damage,and dam seepage and so on.This device is different from the traditional instruments for the rock and soil permeabili-ty.In order to verify the practicability of the device,the authors collected the soil samples for laboratory pene-tration test,observed the seepage damage phenomenon,and obtained the dynamic change curve of permeability coefficient and isopotential map of water pressure.At the same time,the Geostudio finite element software is used to simulate the steady seepage of the test device.By contrast of the isopotential maps between simulation and actual water pressures,it is found that they are approximately the same.It is proved that the test data of the device is scientific and reliable,reaching the results of the test and design purposes.The instrument can be used in many aspects of experimental study on soil seepage.

  1. Differential sperm performance as judged by the zona-free hamster egg penetration test relative to differing sperm penetration techniques.

    Science.gov (United States)

    Chan, S Y; Tucker, M J

    1992-02-01

    A prospective study on 61 unselected semen samples from infertile patients was conducted to evaluate the effects of sperm preparation techniques on the outcomes of the zona-free hamster egg penetration test (HEPT) to assess the in-vitro fertilizing capacity of spermatozoa. Each semen sample was divided into two equal portions before separation of the spermatozoa from seminal plasma either by the single-tube swim-up method, or using a two-layer discontinuous Percoll gradient. Spermatozoa were incubated overnight for initiation of capacitation after which HEPT was performed. The swim-up spermatozoa were further divided into two subgroups before HEPT as follows: with or without (control) treatment for 20 min with 50% (v/v) pooled, human follicular fluid (hFF) which had not been heat-inactivated. It was demonstrated (P less than 0.05) that the Percoll-separated spermatozoa exhibited higher penetration scores (percentage penetration rate and penetration index) than the control or the hFF-treated swim-up spermatozoa. A short exposure (20 min) to hFF significantly increased the penetration scores in HEPT for swim-up spermatozoa (P less than 0.05) but the average results were still significantly lower (P less than 0.05) than those of the Percoll separated spermatozoa, which had received no hFF treatment. Based on these findings, we conclude that the Percoll separation technique is better than the centrifugal pelleting and single-tube swim-up technique for reducing the false-negative results in HEPT. In addition, the use of hFF can significantly improve the performance of the swim-up sperm samples in HEPT.(ABSTRACT TRUNCATED AT 250 WORDS)

  2. Nationwide lithological interpretation of cone penetration tests using neural networks

    Science.gov (United States)

    van Maanen, Peter-Paul; Schokker, Jeroen; Harting, Ronald; de Bruijn, Renée

    2017-04-01

    The Geological Survey of the Netherlands (GSN) systematically produces 3D stochastic geological models of the Dutch subsurface. These voxel models are regarded essential in answering subsurface-related questions on, for example, aggregate resource potential, groundwater flow, land subsidence hazard and the planning and realization of large-scale infrastructural works. GeoTOP is the most recent and detailed generation of 3D voxel models. This model describes 3D stratigraphical and lithological variability up to a depth of 50 m using voxels of 100 × 100 × 0.5 m. Currently, visually described borehole samples are the primary input of these large-scale 3D geological models, both when modeling architecture and composition. Although tens of thousands of cone penetration tests (CPTs) are performed each year, mainly in the reconnaissance phase of construction activities, these data are hardly used as geological model input. There are many reasons why it is of interest to utilize CPT data for geological and lithological modeling of the Dutch subsurface, such as: 1) CPTs are more abundant than borehole descriptions, 2) CPTs are cheaper and easier to gather, and 3) CPT data are more quantitative and uniform than visual sample descriptions. This study uses CPTs and the lithological descriptions of associated nearby undisturbed drilling cores collected by the GSN to establish a nationwide reference dataset for physical and chemical properties of the shallow subsurface. The 167 CPT-core pairs were collected at 160 locations situated in the North, West and South of the Netherlands. These locations were chosen to cover the full extent of geological units and lithological composition in the upper 30 to 40 m of the subsurface in these areas. The distance between the CPT location and associated borehole is small, varying between 0 and 30 m, with an average of 6 m. For each 2 cm CPT interval the data was automatically annotated with the lithoclass from the associated core using a

  3. Dynamics of a solid sphere bouncing on or penetrating through a liquid-air interface

    Science.gov (United States)

    Kim, Seong Jin; Jung, Sunghwan; Lee, Sungyon

    2014-11-01

    In this study, we investigate the dynamics of a solid particle moving from liquid to air through a liquid-air interface. The experimental setup consists of an air-piston system that shoots a solid particle into water towards the free surface from below. Experimental results indicate that the particle either penetrates or bounces back depending on the particle size, impact speed, and surface tension. In particular, the particle needs to overcome the resistive interfacial forces in order to penetrate through the liquid-air interface. This transition from bouncing to penetration regimes is captured theoretically by conducting a simple force balance and is further compared with experiments.

  4. The Conceptual Idea of Online Social Media Site (SMS) User Account Penetration Testing System

    OpenAIRE

    Chockalingam, Sabarathinam; Lallie, Harjinder Singh

    2014-01-01

    Social Media Site (SMS) usage has grown rapidly in the last few years. This sudden increase in SMS usage creates an opportunity for data leakage which could compromise personal and/or professional life. In this work, we have reviewed traditional penetration testing process and discussed the failures of traditional penetration testing process to test the 'People' layer of Simple Enterprise Security Architecture (SESA) model. In order to overcome these failures, we have developed the conceptual...

  5. Materials science. Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration.

    Science.gov (United States)

    Lee, Jae-Hwang; Loya, Phillip E; Lou, Jun; Thomas, Edwin L

    2014-11-28

    Multilayer graphene is an exceptional anisotropic material due to its layered structure composed of two-dimensional carbon lattices. Although the intrinsic mechanical properties of graphene have been investigated at quasi-static conditions, its behavior under extreme dynamic conditions has not yet been studied. We report the high-strain-rate behavior of multilayer graphene over a range of thicknesses from 10 to 100 nanometers by using miniaturized ballistic tests. Tensile stretching of the membrane into a cone shape is followed by initiation of radial cracks that approximately follow crystallographic directions and extend outward well beyond the impact area. The specific penetration energy for multilayer graphene is ~10 times more than literature values for macroscopic steel sheets at 600 meters per second.

  6. Hard rock tunnel boring machine penetration test as an indicator of chipping process efficiency

    Directory of Open Access Journals (Sweden)

    M.C. Villeneuve

    2017-08-01

    Full Text Available The transition from grinding to chipping can be observed in tunnel boring machine (TBM penetration test data by plotting the penetration rate (distance/revolution against the net cutter thrust (force per cutter over the full range of penetration rates in the test. Correlating penetration test data to the geological and geomechanical characteristics of rock masses through which a penetration test is conducted provides the ability to reveal the efficiency of the chipping process in response to changing geological conditions. Penetration test data can also be used to identify stress-induced tunnel face instability. This research shows that the strength of the rock is an important parameter for controlling how much net cutter thrust is required to transition from grinding to chipping. It also shows that the geological characteristics of a rock will determine how efficient chipping occurs once it has begun. In particular, geological characteristics that lead to efficient fracture propagation, such as fabric and mica contents, will lead to efficient chipping. These findings will enable a better correlation between TBM performance and geological conditions for use in TBM design, as a basis for contractual payments where penetration rate dominates the excavation cycle and in further academic investigations into the TBM excavation process.

  7. Stochastic dynamics of penetrable rods in one dimension: Entangled dynamics and transport properties

    Energy Technology Data Exchange (ETDEWEB)

    Craven, Galen T.; Popov, Alexander V.; Hernandez, Rigoberto, E-mail: hernandez@chemistry.gatech.edu [Center for Computational Molecular Science and Technology, School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332-0400 (United States)

    2015-04-21

    The dynamical properties of a system of soft rods governed by stochastic hard collisions (SHCs) have been determined over a varying range of softness using molecular dynamics simulations in one dimension and analytic theory. The SHC model allows for interpenetration of the system’s constituent particles in the simulations, generating overlapping clustering behavior analogous to the spatial structures observed in systems governed by deterministic bounded potentials. Through variation of an assigned softness parameter δ, the limiting ranges of intermolecular softness are bridged, connecting the limiting ensemble behavior from hard to ideal (completely soft). Various dynamical and structural observables are measured from simulation and compared to developed theoretical values. The spatial properties are found to be well predicted by theories developed for the deterministic penetrable-sphere model with a transformation from energetic to probabilistic arguments. While the overlapping spatial structures are complex, the dynamical properties can be adequately approximated through a theory built on impulsive interactions with Enskog corrections. Our theory suggests that as the softness of interaction is varied toward the ideal limit, correlated collision processes are less important to the energy transfer mechanism, and Markovian processes dominate the evolution of the configuration space ensemble. For interaction softness close to hard limit, collision processes are highly correlated and overlapping spatial configurations give rise to entanglement of single-particle trajectories.

  8. Attack and Vulnerability Penetration Testing: FreeBSD

    Directory of Open Access Journals (Sweden)

    Abdul Hanan Abdullah

    2013-07-01

    Full Text Available Computer system security has become a major concern over the past few years. Attacks, threasts or intrusions, against computer system and network have become commonplace events. However, there are some system devices and other tools that are available to overcome the threat of these attacks. Currently, cyber attack is a major research and inevitable. This paper presents some steps of penetration in FreeBSD operating system, some tools and new steps to attack used in this experiment, probes for reconnaissance, guessing password via brute force, gaining privilege access and flooding victim machine to decrease availability. All these attacks were executed and infiltrate within the environment of Intrusion Threat Detection Universiti Teknologi Malaysia (ITD UTM data set. This work is expected to be a reference for practitioners to prepare their systems from Internet attacks.

  9. Joint ACE ground penetrating radar antenna test facility at the Technical University of Denmark

    DEFF Research Database (Denmark)

    Lenler-Eriksen, Hans-Rudolph; Meincke, Peter; Sarri, A.;

    2005-01-01

    A ground penetrating radar (GPR) antenna test facility, established within the ACE network at the Technical University of Denmark (DTU), is described. Examples of results from the facility obtained from measurements of eight different GPR antennas are presented.......A ground penetrating radar (GPR) antenna test facility, established within the ACE network at the Technical University of Denmark (DTU), is described. Examples of results from the facility obtained from measurements of eight different GPR antennas are presented....

  10. Carbon mineralization and oxygen dynamics in sediments with deep oxygen penetration, Lake Superior

    DEFF Research Database (Denmark)

    Li, Jiying; Crowe, Sean Andrew; Miklesh, David

    2012-01-01

    To understand carbon and oxygen dynamics in sediments with deep oxygen penetration, we investigated eight locations (160–318-m depth) throughout Lake Superior. Despite the 2–4 weight percent organic carbon content, oxygen penetrated into the sediment by 3.5 to > 12 cm at all locations. Such deep...... penetration is explained by low sedimentation rates (0.01–0.04 cm yr−1), high solubility of oxygen in freshwater, and a shallow (∼ 2 cm) bioturbation zone. In response mainly to oxygen variations in the bottom waters, the sediment oxygen penetration varied seasonally by as much as several centimeters......, suggesting that temporal variability in deeply oxygenated sediments may be greater than previously acknowledged. The oxygen uptake rates (4.4–7.7 mmol m−2 d−1, average 6.1 mmol m−2 d−1) and carbon mineralization efficiency (∼ 90% of deposited carbon) were similar to those in marine hemipelagic and pelagic...

  11. Dynamic response of brittle materials from penetration and split Hopkinson pressure bar experiments

    Science.gov (United States)

    Frew, Danny Joe

    This research began with a study on the penetration of limestone targets with ogive-nose rod projectiles. Three sets of experiments were conducted with geometrically similar, steel rod projectiles that had length-to-diameter ratios of 10 and 7.1, 12.7, and 25.4-mm-diameters. Results from these penetration experiments and previously developed penetration models suggested that the limestone target exhibited strain-rate sensitivity. In order to investigate this hypothesis, an experimental/analytical program to study the dynamic material response of limestone was begun. As a first step, it was decided to focus on the dynamic material responses of brittle materials, such as limestone, under a state of one-dimensional stress. A split Hopkinson pressure bar (SHPB) facility was built at the Geotechnical and Structures Laboratory, U.S. Army Waterways Experiment Station. Early in the experimental program it became clear that new modifications had to be made to the traditional SHPB apparatus and experimental techniques. In addition, it was decided to model the responses of the SHPB apparatus and the sample under test in order to guide the experimental designs and minimize the experimental trials. The conventional split Hopkinson pressure bar apparatus was modified by shaping the incident pulse such that the samples are in dynamic stress equilibrium and have nearly constant strain rate over most of the test duration. A thin disk of annealed or hard C11000 copper is placed on the impact surface of the incident bar in order to shape the incident pulse. After impact by the striker bar, the copper disk deforms plastically and spreads the pulse in the incident bar. An analytical model and data show that a wide variety of incident strain pulses can be produced by varying the geometry of the copper disks and the length and striking velocity of the striker bar. The pulse shaping model predictions are in good agreement with measurements. Analytic models predict that a ramp stress pulse

  12. Spatio-temporal dynamics of the penetration resistance of recultivated soils formed after open cast mining

    Directory of Open Access Journals (Sweden)

    A. V. Zhukov

    2016-01-01

    Full Text Available On the basis of studying the spatio-temporal dynamics of soil penetration resistance we proved the existence of the technozem ecomorphs as above horizon soil formations. Research was carried out at a research center for study of recultivation processes in Ordzhonikidze city. Measurement of soils penetration was made in field conditions using an Eijkelkamp penetrometer on a regular grid at depths of up to50 cmwith intervals of5 cm. Calculation of average values and degrees of variation was performed by means of descriptive statistical tools. The extent of soil penetration spatial dependence was assessed and the existence of ecomorphs was proved by means of geostatistical analysis. The degree of associativity of spatial distribution of indicators of a soil body in different years of research was established by means of correlation analysis. The level of variation in space and in time of  technozem penetration generated on loess-like loams, grey-green, red-brown clays, and also pedozems was revealed. The degree of spatial dependence of  technozem penetration within soil layers and also the linear sizes of ecomorphs as above horizon soil structures was established. The time dynamics of  penetration of various recultozems were described. As a result of research into the spatio-temporal dynamics of penetration of technozems, data confirming the hypothesis of the existence of ecomorphs as above horizon morphological soil formations were obtained. An ecomorphic approach to the study of the morphological structure of technozems is proposed. The comparative characteristics of ecomorphs from various types of technozem are presented. The results obtained solve the problem of combining the higher and lowest levels in the hierarchical system of soil organisation as a natural body, which should raise the efficiency of the analysis of relations of morphological elements as a basis for detailed reconstruction of recultivation processes, soil formation, and

  13. Geomechanics of penetration :laboratory analog experiments using a modified split hopkinson pressure bar/impact testing procedure.

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Joseph; Gettemy, Glen L.; Bronowski, David R.

    2005-11-01

    This research continues previous efforts to re-focus the question of penetrability away from the behavior of the penetrator itself and toward understanding the dynamic, possibly strain-rate dependent, behavior of the affected materials. A modified split Hopkinson pressure bar technique is prototyped to determine the value of reproducing the stress states, and mechanical responses, of geomaterials observed in actual penetrator tests within a laboratory setting. Conceptually, this technique simulates the passage of the penetrator surface past any fixed point in the penetrator trajectory by allowing for a controlled stress-time function to be transmitted into a sample, thereby mimicking the 1D radial projection inherent to analyses of the cavity expansion problem. Test results from a suite of weak (unconfined compressive strength, or UCS, of 22 MPa) concrete samples, with incident strain rates of 100-250 s{sup -1}, show that the complex mechanical response includes both plastic and anelastic wave propagation, and is critically dependent on incident particle velocity and saturation state. For instance, examination of the transmitted stress-time data, and post-test volumetric measurements of pulverized material, provide independent estimates of the plasticized zone length (1-2 cm) formed for incident particle velocity of {approx}16.7 m/s. The results also shed light on the elastic or energy propagation property changes that occur in the concrete. For example, the pre- and post-test zero-stress elastic wave propagation velocities show that the Young's modulus drops from {approx}19 GPa to <8 GPa for material within the first centimeter from the plastic transition front, while the Young's modulus of the dynamically confined, axially-stressed (in 6-18 MPa range) plasticized material drops to 0.5-0.6 GPa. The data also suggest that the critical particle velocity for formation of a plastic zone in the weak concrete is 13-15 m/s, with increased saturation tending to

  14. Professional penetration testing creating and operating a formal hacking lab

    CERN Document Server

    Wilhelm, Thomas

    2009-01-01

    PART I - Setting Up. Chapter 1: Introduction. Chapter 2: Ethics and Hacking. Chapter 3: Hacking as a Career. Chapter 4: Setting up Your Lab. Chapter 5: Creating and Using PenTest Targets in Your Lab. Chapter 6: Methodologies. Chapter 7: PenTest Metrics. Chapter 8: Management of a PenTest. PART II - Running a PenTest. Chapter 9: Information Gathering. Chapter 10: Vulnerability Identification. Chapter 11: Vulnerability Verification. Chapter 12: Compromising a System and Privilege Escalation. Chapter 13: Maintaining Access. Chapter 14: Covering Your Tracks. PART III - Wrapping Everything Up. Chap

  15. A new penetration test method: protection efficiency of glove and clothing materials against diphenylmethane diisocyanate (MDI).

    Science.gov (United States)

    Henriks-Eckerman, Maj-Len; Mäkelä, Erja

    2015-03-01

    Reported cases of allergic contact dermatitis caused by methylenediphenyl diisocyanate (MDI) have increased and thereby increased the need for adequate skin protection. Current standardized permeation and penetration test methods give information about efficacy of protective materials against individual components of the polyurethane systems. They do not give information of what kind of clothing materials workers should wear against splashes when handling mixed MDI-polyurethane formulations, which contain MDI, its oligomers, and polyols. The aim of this study was to develop and validate a sensitive penetration test method that can be used to select clothing that is protective enough against uncured splashes of MDI-polyurethane, still easy to use, and also, to find affordable glove materials that provide adequate protection during a short contact. The penetration of MDI through eight representative glove or clothing materials was studied with the developed test procedure. One MDI hardener and two polymeric MDI (PMDI)-polyol formulations representing different curing times were used as test substances. The materials tested included work clothing (woven) fabric, arm shields (nonwoven fabric), old T-shirt, winter gloves, and gloves of nitrile rubber, leather, vinyl (PVC), and natural rubber. A drop (50 µl) of test substance was added to the outer surface of the glove/clothing material, which had Tape Fixomull attached to the inner surface as a collection medium. After penetration times of 5 or 20min, the collecting material was removed and immediately immersed into acetonitrile containing 1-(2-methoxyphenyl)-piperazine for derivatization. The formed urea derivatives of 2,4'-MDI and 4,4'-MDI were analysed using liquid chromatography with mass spectrometric and UV detection. The precision of the test method was good for the material with high penetration (work clothing fabric) of MDI, as the relative standard deviation (RSD) was 14 and 20%. For the arm shield with a low

  16. Field Tests to Investigate the Penetration Rate of Piles Driven by Vibratory Installation

    Directory of Open Access Journals (Sweden)

    Zhaohui Qin

    2017-01-01

    Full Text Available Factors directly affecting the penetration rate of piles installed by vibratory driving technique are summarized and classified into seven aspects which are driving force, resistance, vibratory amplitude, energy consumption, speeding up at the beginning, pile plumbness keeping, and slowing down at the end, from the mechanism and engineering practice of the vibratory pile driving. In order to find out how these factors affect the penetration rate of the pile in three major actors of vibratory pile driving: (i the pile to be driven, (ii the selected driving system, and (iii the imposed soil conditions, field tests on steel sheet piles driven by vibratory driving technique in different soil conditions are conducted. The penetration rates of three different sheet pile types having up to four different lengths installed using two different vibratory driving systems are documented. Piles with different lengths and types driven with or without clutch have different penetration rates. The working parameters of vibratory hammer, such as driving force and vibratory amplitude, have great influences on the penetration rate of the pile, especially at the later stages of the sinking process. Penetration rate of piles driven in different soil conditions is uniform because of the different penetration resistance including shaft friction and toe resistance.

  17. The ethical hack a framework for business value penetration testing

    CERN Document Server

    Tiller, James S

    2004-01-01

    INTRODUCTIONPerspectives of ValueSECURITY AND HACKINGInformation SecuritySecurity ArchitectureHacking ImpactsTHE FRAMEWORKBusiness Planning and OperationsReconnaissanceEnumerationVulnerability AnalysisExploitationFinal AnalysisDeliverableIntegration INFORMATION SECURITY PROGRAMScope of Information Security ProgramsThe Process of Information SecurityComponent Parts of Information Security ProgramsBUSINESS PLANNING AND OPERATIONSBusiness ObjectivesSecurity PolicyPrevious Test ResultsBusiness ChallengesThe Business of SecurityReasoningOverall ExpectationsHow Deep is Deep Enough?Timing is Everythi

  18. Interactions of skin thickness and physicochemical properties of test compounds in percutaneous penetration studies

    NARCIS (Netherlands)

    Wilkinson, S.C.; Maas, W.J.M.; Nielsen, J.B.; Greaves, L.C.; Sandt, J.J.M. van de; Williams, F.M.

    2006-01-01

    Objectives: To determine the effect of skin thickness on the percutaneous penetration and distribution of test compounds with varying physicochemical properties using in vitro systems. Studies were carried out in accordance with OECD guidelines on skin absorption tests. Methods: Percutaneous penetra

  19. Dynamics of crack penetration vs. branching at a weak interface: An experimental study

    Science.gov (United States)

    Sundaram, Balamurugan M.; Tippur, Hareesh V.

    2016-11-01

    In this paper, the dynamic crack-interface interactions and the related mechanics of crack penetration vs. branching at a weak interface are studied experimentally. The interface is oriented perpendicular to the incoming mode-I crack in an otherwise homogeneous bilayer. The focus of this investigation is on the effect of interface location and the associated crack-tip parameters within the bilayer on the mechanics of the ensuing fracture behavior based on the optical methodologies laid down in Ref. Sundaram and Tippur (2016). Time-resolved optical measurement of crack-tip deformations, velocity and stress intensity factor histories in different bilayer configurations is performed using Digital Gradient Sensing (DGS) technique in conjunction with high-speed photography. The results show that the crack path selection at the interface and subsequently the second layer are greatly affected by the location of the interface within the geometry. Using optically measured fracture parameters, the mechanics of crack penetration and branching are explained. Counter to the intuition, a dynamically growing mode-I approaching a weak interface at a lower velocity and stress intensity factor penetrates the interface whereas a higher velocity and stress intensity factor counterpart gets trapped by the interface producing branched daughter cracks until they kink out into the next layer. An interesting empirical observation based on measured crack-tip parameters for crack penetration and branching is also made.

  20. CISO's guide to penetration testing a framework to plan, manage, and maximize benefits

    CERN Document Server

    Tiller, James S

    2011-01-01

    CISO's Guide to Penetration Testing: A Framework to Plan, Manage, and Maximize Benefits details the methodologies, framework, and unwritten conventions penetration tests should cover to provide the most value to your organization and your customers. Discussing the process from both a consultative and technical perspective, it provides an overview of the common tools and exploits used by attackers along with the rationale for why they are used. From the first meeting to accepting the deliverables and knowing what to do with the results, James Tiller explains what to expect from all phases of th

  1. Penetrating annulus fibrosus injuries affect dynamic compressive behaviors of the intervertebral disc via altered fluid flow: an analytical interpretation.

    Science.gov (United States)

    Michalek, Arthur J; Iatridis, James C

    2011-08-01

    Extensive experimental work on the effects of penetrating annular injuries indicated that large injuries impact axial compressive properties of small animal intervertebral discs, yet there is some disagreement regarding the sensitivity of mechanical tests to small injury sizes. In order to understand the mechanism of injury size sensitivity, this study proposed a simple one dimensional model coupling elastic deformations in the annulus with fluid flow into and out of the nucleus through both porous boundaries and through a penetrating annular injury. The model was evaluated numerically in dynamic compression with parameters obtained by fitting the solution to experimental stress-relaxation data. The model predicted low sensitivity of mechanical changes to injury diameter at both small and large sizes (as measured by low and high ratios of injury diameter to annulus thickness), with a narrow range of high sensitivity in between. The size at which axial mechanics were most sensitive to injury size (i.e., critical injury size) increased with loading frequency. This study provides a quantitative hypothetical model of how penetrating annulus fibrosus injuries in discs with a gelatinous nucleus pulposus may alter disc mechanics by changing nucleus pulposus fluid pressurization through introduction of a new fluid transport pathway though the annulus. This model also explains how puncture-induced biomechanical changes depend on both injury size and test protocol.

  2. Performance Assessment of Hard Rock TBM and Rock Boreability Using Punch Penetration Test

    Science.gov (United States)

    Jeong, Ho-Young; Cho, Jung-Woo; Jeon, Seokwon; Rostami, Jamal

    2016-04-01

    Rock indentation tests are often called punch penetration tests and are known to be related to penetration rates of drilling equipment and hard rock tunnel boring machines (TBMs). Various indices determined from analysis of the force-penetration plot generated from indentation tests have been used to represent the drillability, boreability, and brittleness of rocks. However, no standard for the punch penetration test procedure or method for calculating the related indices has been suggested or adopted in the rock mechanics community. This paper introduces new indices based on the punch test to predict the performance of hard rock TBMs. A series of punch tests was performed on rock specimens representing six rock formations in Korea with different dimensions, i.e., the core specimens had different lengths and diameters. Of the indices obtained from the punch tests, the peak load index and mean load index showed good correlations with the cutting forces measured in full-scale linear cutting machine tests on the same rock types. The indices also showed good linear correlations with the ratio of uniaxial strength to Brazilian tensile strength, which indicates the brittleness of rock. The scale effect of using core specimens was investigated, and a preferred dimension for the punch test specimens is proposed. This paper also discusses the results of the punch test and full-scale rock cutting tests using LCM. The results of this study confirm that the proposed indices from the punch tests can be used to provide a reliable prediction of the cutting forces that act on a disc cutter. The estimated cutting forces can then be used for optimization of cutter-head design and performance prediction of hard rock TBMs.

  3. The ACE-DTU Planar Near-Field Ground Penetrating Radar Antenna Test Facility

    DEFF Research Database (Denmark)

    Lenler-Eriksen, Hans-Rudolph; Meincke, Peter

    2004-01-01

    The ACE-DTU planar near-field ground penetrating radar (GPR) antenna test facility is used to measure the plane-wave transmitting spectrum of a GPR loop antenna close to the air-soil interface by means of a probe buried in soil. Probe correction is implemented using knowledge about the complex...

  4. The ACE-DTU Planar Near-Field Ground Penetrating Radar Antenna Test Facility

    DEFF Research Database (Denmark)

    Lenler-Eriksen, Hans-Rudolph; Meincke, Peter

    2004-01-01

    The ACE-DTU planar near-field ground penetrating radar (GPR) antenna test facility is used to measure the plane-wave transmitting spectrum of a GPR loop antenna close to the air-soil interface by means of a probe buried in soil. Probe correction is implemented using knowledge about the complex...

  5. Ballistic penetration test results for Ductal and ultra-high performance concrete samples.

    Energy Technology Data Exchange (ETDEWEB)

    Reinhart, William Dodd; Thornhill, Tom Finley, III (KTech)

    2010-03-01

    This document provides detailed test results of ballistic impact experiments performed on several types of high performance concrete. These tests were performed at the Sandia National Laboratories Shock Thermodynamic Applied Research Facility using a 50 caliber powder gun to study penetration resistance of concrete samples. This document provides test results for ballistic impact experiments performed on two types of concrete samples, (1) Ductal{reg_sign} concrete is a fiber reinforced high performance concrete patented by Lafarge Group and (2) ultra-high performance concrete (UHPC) produced in-house by DoD. These tests were performed as part of a research demonstration project overseen by USACE and ERDC, at the Sandia National Laboratories Shock Thermodynamic Applied Research (STAR) facility. Ballistic penetration tests were performed on a single stage research powder gun of 50 caliber bore using a full metal jacket M33 ball projectile with a nominal velocity of 914 m/s (3000 ft/s). Testing was observed by Beverly DiPaolo from ERDC-GSL. In all, 31 tests were performed to achieve the test objectives which were: (1) recovery of concrete test specimens for post mortem analysis and characterization at outside labs, (2) measurement of projectile impact velocity and post-penetration residual velocity from electronic and radiographic techniques and, (3) high-speed photography of the projectile prior to impact, impact and exit of the rear surface of the concrete construct, and (4) summarize the results.

  6. Standard practice for visible penetrant testing using Solvent-Removable process

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for visible penetrant examination utilizing the solvent-removable process. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This practice also provides a reference: 1.2.1 By which a visible penetrant examination method using the solvent-removable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the visible, solvent-removable liquid penetrant examination of materials and parts. Agreement ...

  7. Standard practice for fluorescent liquid penetrant testing using the hydrophilic Post-Emulsification process

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for fluorescent penetrant examination utilizing the hydrophilic post-emulsification process. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This practice also provides a reference: 1.2.1 By which a fluorescent penetrant examination hydrophilic post-emulsification process recommended or required by individual organizations can be reviewed to ascertain their applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the fluorescent penetrant examination of materials and parts using the hy...

  8. Standard practice for fluorescent liquid penetrant testing using the Solvent-Removable process

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for fluorescent penetrant examination utilizing the solvent-removable process. It is a nondestructive testing method for detecting discontinuities that are open to the surface, such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This practice also provides a reference: 1.2.1 By which a fluorescent penetrant examination solvent-removable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the fluorescent solvent-removable liquid penetrant examination of materials and parts. Agreement by th...

  9. Standard practice for fluorescent liquid penetrant testing using the Water-Washable process

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for water-washable fluorescent penetrant examination of materials. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of porosity and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This practice also provides a reference: 1.2.1 By which a fluorescent penetrant examination method using the water-washable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the water-washable fluorescent penetrant examination of materials and parts. Agreement by the purch...

  10. Extended-Term Dynamic Simulations with High Penetrations of Photovoltaic Generation.

    Energy Technology Data Exchange (ETDEWEB)

    Concepcion, Ricky James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Elliott, Ryan Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Donnelly, Matt [Montana Tech., Butte, MT (United States); Sanchez-Gasca, Juan [GE Energy, Schenectady, NY (United States)

    2016-01-01

    The uncontrolled intermittent availability of renewable energy sources makes integration of such devices into today's grid a challenge. Thus, it is imperative that dynamic simulation tools used to analyze power system performance are able to support systems with high amounts of photovoltaic (PV) generation. Additionally, simulation durations expanding beyond minutes into hours must be supported. This report aims to identify the path forward for dynamic simulation tools to accom- modate these needs by characterizing the properties of power systems (with high PV penetration), analyzing how these properties affect dynamic simulation software, and offering solutions for po- tential problems. We present a study of fixed time step, explicit numerical integration schemes that may be more suitable for these goals, based on identified requirements for simulating high PV penetration systems. We also present the alternative of variable time step integration. To help determine the characteristics of systems with high PV generation, we performed small signal sta- bility studies and time domain simulations of two representative systems. Along with feedback from stakeholders and vendors, we identify the current gaps in power system modeling including fast and slow dynamics and propose a new simulation framework to improve our ability to model and simulate longer-term dynamics.

  11. A numerical test of a high-penetrability approximation for the one-dimensional penetrable-square-well model.

    Science.gov (United States)

    Fantoni, Riccardo; Giacometti, Achille; Malijevský, Alexandr; Santos, Andrés

    2010-07-14

    The one-dimensional penetrable-square-well fluid is studied using both analytical tools and specialized Monte Carlo simulations. The model consists of a penetrable core characterized by a finite repulsive energy combined with a short-range attractive well. This is a many-body one-dimensional problem, lacking an exact analytical solution, for which the usual van Hove theorem on the absence of phase transition does not apply. We determine a high-penetrability approximation complementing a similar low-penetrability approximation presented in previous work. This is shown to be equivalent to the usual Debye-Hückel theory for simple charged fluids for which the virial and energy routes are identical. The internal thermodynamic consistency with the compressibility route and the validity of the approximation in describing the radial distribution function is assessed by a comparison against numerical simulations. The Fisher-Widom line separating the oscillatory and monotonic large-distance behaviors of the radial distribution function is computed within the high-penetrability approximation and compared with the opposite regime, thus providing a strong indication of the location of the line in all possible regimes. The high-penetrability approximation predicts the existence of a critical point and a spinodal line, but this occurs outside the applicability domain of the theory. We investigate the possibility of a fluid-fluid transition by the Gibbs ensemble Monte Carlo techniques, not finding any evidence of such a transition. Additional analytical arguments are given to support this claim. Finally, we find a clustering transition when Ruelle's stability criterion is not fulfilled. The consequences of these findings on the three-dimensional phase diagrams are also discussed.

  12. Electrical resistivity testing for as-built concrete performance assessment of chloride penetration resistance

    OpenAIRE

    Polder, R.B.; Peelen, W.H.A.

    2014-01-01

    The electrical resistivity of concrete can provide information about its transport properties, which is relevant for durability performance. For example, resistivity is inversely proportional to chloride diffusion, at least within similar concrete compositions. A methodology is proposed for on-site assessment of concrete cover resistance against chloride penetration, based on on-site resistivity testing. As such, resistivity testing can extend existing service life approaches to assessing on ...

  13. Protective clothing for pesticide operators: part I--selection of a reference test chemical for penetration testing.

    Science.gov (United States)

    Shaw, Anugrah; Schiffelbein, Paul

    2016-01-01

    A systematic approach was taken to develop a database for protective clothing for pesticide operators; results are reported as a two-part series. Part I describes the research studies that led to identification of a pesticide formulation that could serve as a reference test chemical for further testing. Measurement of pesticide penetration was conducted using different types of pesticide formulations. Six fabrics were tested using 10 formulations at different concentrations. Three formulations were subsequently selected for further testing. Analysis of the data indicated that, when compared with other formulations, mean percent penetration of 5% Prowl 3.3 EC [emulsifiable concentrate diluted to 5% active ingredient (pendimethalin)] is either similar to or higher than most test chemicals. Those results led to choosing 5% Prowl 3.3 EC as a reference test liquid. Part II of the study, published as a separate paper, includes data on a wide range of textile materials.

  14. Insurance penetration and economic growth in Africa: Dynamic effects analysis using Bayesian TVP-VAR approach

    Directory of Open Access Journals (Sweden)

    D.O. Olayungbo

    2016-12-01

    Full Text Available This paper examines the dynamic interactions between insurance and economic growth in eight African countries for the period of 1970–2013. Insurance demand is measured by insurance penetration which accounts for income differences across the sample countries. A Bayesian Time Varying Parameter Vector Auto regression (TVP-VAR model with stochastic volatility is used to analyze the short run and the long run among the variables of interest. Using insurance penetration as a measure of insurance to economic growth, we find positive relationship for Egypt, while short-run negative and long-run positive effects are found for Kenya, Mauritius, and South Africa. On the contrary, negative effects are found for Algeria, Nigeria, Tunisia, and Zimbabwe. Implementation of sound financial reforms and wide insurance coverage are proposed recommendations for insurance development in the selected African countries.

  15. Molecular dynamics simulations of the penetration lengths: application within the fluctuation theory for diffusion coefficients

    DEFF Research Database (Denmark)

    Galliero, Guillaume; Medvedev, Oleg; Shapiro, Alexander

    2005-01-01

    Mutual diffusion in condensed phases is a theoretically and practically important subject of active research. One of the most rigorous and theoretically advanced approaches to the problem is a recently developed approach based on the concept of penetration lengths (Physica A 320 (2003) 211; Physi...... fluctuation theory and molecular dynamics scheme exhibit consistent trends and average deviations from experimental data around 10-20%. (c) 2004 Elsevier B.V. All rights reserved....... binary liquid mixtures of non-polar components that computed penetration lengths, for various temperatures and compositions, are consistent with those deduced from experiments in the framework of the formalism of the fluctuation theory. Moreover, the mutual diffusion coefficients obtained from a coupled...

  16. Dynamic security issues in autonomous power systems with increasing wind power penetration

    DEFF Research Database (Denmark)

    Margaris, I.D.; Hansen, Anca Daniela; Sørensen, Poul Ejnar

    2011-01-01

    Technical requirements set by the network operators nowadays include various aspects, such as fault ride-through capability of wind turbines during faults, voltage-reactive power control and overall control of the wind farms as conventional power plants. Detailed models for the power system as well...... as for the wind farms are therefore essential for power system studies related to these issues, especially when applied to non interconnected systems with high wind power penetration. Detailed generic models for three different wind turbine technologies – Active Stall Induction Generator (ASIG), Doubly Fed...... Asynchronous Generator (DFAG) and Permanent Magnet Synchronous Generator (PMSG) – are applied and issues regarding interaction with the power system are investigated. This paper provides conclusions about the dynamic security of non-interconnected power systems with high wind power penetration based...

  17. Wet voice as a sign of penetration/aspiration in Parkinson's disease: does testing material matter?

    Science.gov (United States)

    Sampaio, Marília; Argolo, Natalie; Melo, Ailton; Nóbrega, Ana Caline

    2014-10-01

    Wet voice is a perceptual vocal quality that is commonly used as an indicator of penetration and/or aspiration in clinical swallowing assessments and bedside screening tests. Our aim was to describe the clinimetric characteristics of this clinical sign using various fluid materials and one solid food in the Parkinson's disease (PD) population. Consecutive PD individuals were submitted for simultaneous fiberoptic endoscopic evaluation of swallowing (FEES) and voice recording. Speech therapists rated the presence or absence of wetness and other voice abnormalities. Two binary endpoints of FEES were selected for comparison with an index test: low penetration (LP) and low penetration and/or aspiration (LP/ASP). The accuracy of wet voice changed according to the testing material in PD patients. Overall, the specificity of this indicator was better than its sensitivity, and the wafer cookie and yogurt drink yielded the best indices. Our data show that wet voice is clearly indicative of LP or LP/ASP in PD patients in case of positive test. However, in the case of a negative result, the wet voice test should be repeated or combined with other clinical tests to include or exclude the risk of LP or LP/ASP.

  18. Dynamic Testing: Toward a Multiple Exciter Test

    Science.gov (United States)

    2015-04-01

    55 Defense AT&L: March–April 2015 Dynamic Testing Toward a Multiple Exciter Test Michael T. Hale n William A. Barber Hale is an electronics...has taken decades of advancements in vibration control and exciter technology. Below are a short historical path of the evolution of the discipline...toward multiple exciter /multiple degree-of-freedom (MDOF) testing, an example of an MDOF vibration system and a discussion of benefits of the

  19. Book Review: Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E

    Directory of Open Access Journals (Sweden)

    Joshua Bartolomie

    2013-09-01

    Full Text Available Wilhelm, T. (2013. Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E. Waltham, MA: Syngress, 464 pages, ISBN-10: 1597499935; ISBN-13: 978-1597499934, US$79.99Reviewed by Joshua Bartolomie, CISSP, CEECS, CFCE, DFCP, CRISC, CSMOrganizations often strive for proactive information security programs in an effort to limit occurrence and impact of security breaches. However, traditional security programs run the risk of being unable to provide adequate insight and proactive awareness into real attack vectors that may exist within their organizations. With attack methods and efforts becoming increasingly aggressive, and effective, organizations must take equally assertive measures to protect their critical information and assets. Penetration testing is one of those tools that is often misunderstood, overlooked, and undervalued. A true adversary would not hesitate to exploit every potential to gain entry or cause a disruption to their target.(see PDF for full review

  20. Book Review: Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E

    OpenAIRE

    Joshua Bartolomie

    2013-01-01

    Wilhelm, T. (2013). Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E. Waltham, MA: Syngress, 464 pages, ISBN-10: 1597499935; ISBN-13: 978-1597499934, US$79.99Reviewed by Joshua Bartolomie, CISSP, CEECS, CFCE, DFCP, CRISC, CSMOrganizations often strive for proactive information security programs in an effort to limit occurrence and impact of security breaches. However, traditional security programs run the risk of being unable to provide adequate insight and proactiv...

  1. Cooperative dynamics in the penetration of a group of intruders in a granular medium.

    Science.gov (United States)

    Pacheco-Vázquez, F; Ruiz-Suárez, J C

    2010-11-23

    An object moving in a fluid experiences a drag force that depends on its velocity, shape and the properties of the medium. From this simplest case to the motion of a flock of birds or a school of fish, the drag forces and the hydrodynamic interactions determine the full dynamics of the system. Similar drag forces appear when a single projectile impacts and moves through a granular medium, and this case is well studied in the literature. On the other hand, the case in which a group of intruders impact a granular material has never been considered. Here, we study the simultaneous penetration of several intruders in a very low-density granular medium. We find that the intruders move through it in a collective way, following a cooperative dynamics, whose complexity resembles flocking phenomena in living systems or the movement of reptiles in sand, wherein changes in drag are exploited to efficiently move or propel.

  2. CYCLIC HARDENING BEHAVIOR OF POLYCRYSTALS WITH PENETRABLE GRAIN BOUNDARIES: TWO-DIMENSIONAL DISCRETE DISLOCATION DYNAMICS SIMULATION

    Institute of Scientific and Technical Information of China (English)

    Chuantao Hou; Zhenhuan Li; Minsheng Huang; Chaojun Ouyang

    2009-01-01

    A two-dimensional discrete dislocation dynamics (DDD) technology by Giessen and Needleman (1995), which has been extended by integrating a dislocation-grain boundary interaction model, is used to computationally analyze the micro-cyclic plastic response of polycrystals containing micron-sized grains, with special attentions to significant influence of dislocationpenetrable grain boundaries (GBs) on the micro-plastic cyclic responses of polycrystals and underlying dislocation mechanism. Toward this end, a typical polycrystalline rectangular specimen under simple tension-compression loading is considered. Results show that, with the increase of cycle accumulative strain, continual dislocation accumulation and enhanced dislocation-dislocation interactions induce the cyclic hardening behavior; however, when a dynamic balance among dislocation nucleation, penetration through GB and dislocation annihilation is approximately established, cyclic stress gradually tends to saturate. In addition, other factors, including the grain size, cyclic strain amplitude and its history, also have considerable influences on the cyclic hardening and saturation.

  3. Testing Penetration of Epoxy Resin and Diamine Hardeners through Protective Glove and Clothing Materials.

    Science.gov (United States)

    Henriks-Eckerman, Maj-Len; Mäkelä, Erja A; Suuronen, Katri

    2015-10-01

    Efficient, comfortable, yet affordable personal protective equipment (PPE) is needed to decrease the high incidence of allergic contact dermatitis arising from epoxy resin systems (ERSs) in industrial countries. The aim of this study was to find affordable, user-friendly glove and clothing materials that provide adequate skin protection against splashes and during the short contact with ERS that often occurs before full cure. We studied the penetration of epoxy resin and diamine hardeners through 12 glove or clothing materials using a newly developed test method. The tests were carried out with two ERS test mixtures that had a high content of epoxy resin and frequently used diamine hardeners of different molar masses. A drop (50 µl) of test mixture was placed on the outer surface of the glove/clothing material, which had a piece of Fixomull tape or Harmony protection sheet attached to the inner surface as the collection medium. The test times were 10 and 30 min. The collecting material was removed after the test was finished and immersed into acetone. The amounts of diglycidyl ether of bisphenol A (DGEBA), isophorone diamine (IPDA), and m-xylylenediamine (XDA) in the acetone solution were determined by gas chromatography with mass spectrometric detection. The limit for acceptable penetration of XDA, IPDA, and DGEBA through glove materials was set at 2 µg cm(-2). Penetration through the glove materials was 1.4 µg cm(-2) or less. The three tested chemical protective gloves showed no detectable penetration (<0.5 µg cm(-2)). Several affordable glove and clothing materials were found to provide adequate protection during short contact with ERS, in the form of, for example, disposable gloves or clothing materials suitable for aprons and as additional protective layers on the most exposed parts of clothing, such as the front of the legs and thighs and under the forearms. Every ERS combination in use should be tested separately to find the best skin protection material

  4. Application of Standard Penetration Test(SPT)in Hydro-power Projects in Sudan

    Institute of Scientific and Technical Information of China (English)

    Zhang xiaoqiang; Wanglei

    2010-01-01

    For the Past two years,our institute has accomplished the Geo-technical investigation of Kajbar,Shereik,Sabaloka,Dal,Dagash,and Mograt Hydro-power Project etc.in Republic of Sudan.Based on the experiences in Dagash Hydro-power Project,this article elaborates on the operation & application of SPT in above mentioned 6projects and points out the differences from domestic operation of the test,by which,we hope to contribute to the sharing and communication of knowledge.[Kew Words]Sudan,Dam,Standard Penetration Test(SPT),differences.

  5. Assessment of the TASER XREP blunt impact and penetration injury potential using cadaveric testing.

    Science.gov (United States)

    Lucas, Scott R; McGowan, Joseph C; Lam, Tack C; Yamaguchi, Gary T; Carver, Matthew; Hinz, Andrew

    2013-01-01

    TASER International's extended range electronic projectile (XREP) is intended to be fired from a shotgun, impact a threat, and apply remote neuromuscular incapacitation. This study investigated the corresponding potential of blunt impact injury and penetration. Forty-three XREP rounds were deployed onto two male human cadaver torsos at impact velocities between 70.6 and 95.9 m/sec (232 and 315 ft/sec). In 42 of the 43 shots fired, the XREP did not penetrate the abdominal wall, resulting in superficial wounds only. On one shot, the XREP's nose section separated prematurely in flight, resulting in penetration. No bony fractures were observed with any of the shots. The viscous criterion (VC), blunt criterion (BC), and energy density (E/A) were calculated (all nonpenetrating tests, average ± 1 standard deviation: VC: 1.14 ± 0.94 m/sec, BC: 0.77 ± 0.15, E/A: 22.6 ± 4.15 J/cm(2)) and, despite the lack of injuries, were generally found to be greater than published tolerance values.

  6. Geohydrology of rocks penetrated by test well USW H-6, Yucca Mountain, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Craig, R.W. [Geological Survey, Denver, CO (United States); Reed, R.L. [Fenix and Scisson, Inc., Tulsa, OK (United States)

    1991-12-01

    Test well USW H-6 is one of several wells drilled in the Yucca Mountain area near the southwestern part of the Nevada Test Site for investigations related to isolation of high-level nuclear waste. This well was drilled to a depth of 1,220 meters. Rocks penetrated are predominantly ash-flow tuffs of Tertiary age, with the principal exception of dacitic(?) lave penetrated at a depth from 877 to 1,126 meters. The composite static water level was about 526 meters below the land surface; the hydraulic head increased slightly with depth. Most permeability in the saturated zone is in two fractured intervals in Crater Flat Tuff. Based on well-test data using the transitional part of a dual-porosity solution, an interval of about 15 meters in the middle part of the Bullfrog Member of the Crater Flat Tuff has a calculated transmissivity of about 140 meters squared per day, and an interval of about 11 meters in the middle part of the Tram Member of the Crater Flat Tuff has a calculated transmissivity of about 75 meters squared per day. The upper part of the Bullfrog Member has a transmissivity of about 20 meters squared per day. The maximum likely transmissivity of any rocks penetrated by the test well is about 480 meters squared per day, based on a recharge-boundary model. The remainder of the open hole had no detectable production. Matrix hydraulic conductivity ranges from less than 5 {times} 10{sup {minus}5} to 1 {times} 10{sup {minus}3} meter per day. Ground water is a sodium bicarbonate type that is typical of water from tuffaceous rock of southern Nevada. The apparent age of the water is about 14,6000 years. 29 refs., 26 figs., 5 tabs.

  7. High dynamic range subjective testing

    Science.gov (United States)

    Allan, Brahim; Nilsson, Mike

    2016-09-01

    This paper describes of a set of subjective tests that the authors have carried out to assess the end user perception of video encoded with High Dynamic Range technology when viewed in a typical home environment. Viewers scored individual single clips of content, presented in High Definition (HD) and Ultra High Definition (UHD), in Standard Dynamic Range (SDR), and in High Dynamic Range (HDR) using both the Perceptual Quantizer (PQ) and Hybrid Log Gamma (HLG) transfer characteristics, and presented in SDR as the backwards compatible rendering of the HLG representation. The quality of SDR HD was improved by approximately equal amounts by either increasing the dynamic range or increasing the resolution to UHD. A further smaller increase in quality was observed in the Mean Opinion Scores of the viewers by increasing both the dynamic range and the resolution, but this was not quite statistically significant.

  8. Dynamic testing of cable structures

    Directory of Open Access Journals (Sweden)

    Caetano Elsa

    2015-01-01

    Full Text Available The paper discusses the role of dynamic testing in the study of cable structures. In this context, the identification of cable force based on vibration measurements is discussed. Vibration and damping assessment are then introduced as the focus of dynamic monitoring systems, and particular aspects of the structural behaviour under environmental loads are analysed. Diverse application results are presented to support the discussion centred on cable-stayed bridges, roof structures, a guyed mast and a transmission line.

  9. Testing sea-level markers observed in ground-penetrating radar data from Feddet, south-eastern Denmark

    DEFF Research Database (Denmark)

    Hede, Mikkel Ulfeldt; Nielsen, Lars; Clemmensen, Lars B;

    2012-01-01

    Ground-penetrating radar (GPR) data have been collected across the modern part (test identification of sea-level markers in GPR data from microtidal depositional environments. Nielsen and Clemmensen (2009) showed...

  10. Feasibility of Penetrant Testing on Surface Axial-Radial Cracks of GH4169 Super Alloy Turbine Disk

    Directory of Open Access Journals (Sweden)

    QIAO Haiyan

    2016-12-01

    Full Text Available The post emulsifiable and water-washable fluorescent penetrant testing were carried out with ZL-27A and ZL67 respectively. Ultrasonic cleaning by detergent were used for 30 minutes before penetrant. The parts were immersed and drained for 60 minutes. The macroscopic and microscopic characteristics of cracks were researched using the split mirror and scanning electron microscope. The results show that the outgrowth of high temperature oxidation plugs up the forging cracks. Thus the penetrant testing is not effective in detecting this type of cracks.

  11. Interactions of skin thickness and physicochemical properties of test compounds in percutaneous penetration studies

    DEFF Research Database (Denmark)

    Wilkinson, Simon C.; Maas, Wilfred J. M.; Nielsen, Jesper Bo

    2006-01-01

    conditions was measured using flow through cells for 8-24 h. Saline (adjusted to pH 7.4) was used as receptor fluid, with BSA added for studies with testosterone and propoxur. Following exposure, the remaining surface dose was removed by swabbing and the skin digested prior to scintillation counting. Results......Abstract   Objectives: To determine the effect of skin thickness on the percutaneous penetration and distribution of test compounds with varying physicochemical properties using in vitro systems. Studies were carried out in accordance with OECD guidelines on skin absorption tests. Methods......: Percutaneous penetration of caffeine (log P -0.01), testosterone (log P 3.32), propoxur (log P 1.52) (finite dose in ethanol to water vehicle ratio) and butoxyethanol (log P 0.83) (undiluted finite dose or as an infinite dose 50% [v/v] aqueous solution) through skin of varying thicknesses under occluded...

  12. Interactions of skin thickness and physicochemical properties of test compounds in percutaneous penetration studies

    DEFF Research Database (Denmark)

    Wilkinson, Simon C.; Maas, Wilfred J. M.; Nielsen, Jesper Bo

    2006-01-01

    Abstract   Objectives: To determine the effect of skin thickness on the percutaneous penetration and distribution of test compounds with varying physicochemical properties using in vitro systems. Studies were carried out in accordance with OECD guidelines on skin absorption tests. Methods......: Percutaneous penetration of caffeine (log P -0.01), testosterone (log P 3.32), propoxur (log P 1.52) (finite dose in ethanol to water vehicle ratio) and butoxyethanol (log P 0.83) (undiluted finite dose or as an infinite dose 50% [v/v] aqueous solution) through skin of varying thicknesses under occluded...... conditions was measured using flow through cells for 8-24 h. Saline (adjusted to pH 7.4) was used as receptor fluid, with BSA added for studies with testosterone and propoxur. Following exposure, the remaining surface dose was removed by swabbing and the skin digested prior to scintillation counting. Results...

  13. Analysis of pumping tests: Significance of well diameter, partial penetration, and noise

    Science.gov (United States)

    Heidari, M.; Ghiassi, K.; Mehnert, E.

    1999-01-01

    The nonlinear least squares (NLS) method was applied to pumping and recovery aquifer test data in confined and unconfined aquifers with finite diameter and partially penetrating pumping wells, and with partially penetrating piezometers or observation wells. It was demonstrated that noiseless and moderately noisy drawdown data from observation points located less than two saturated thicknesses of the aquifer from the pumping well produced an exact or acceptable set of parameters when the diameter of the pumping well was included in the analysis. The accuracy of the estimated parameters, particularly that of specific storage, decreased with increases in the noise level in the observed drawdown data. With consideration of the well radii, the noiseless drawdown data from the pumping well in an unconfined aquifer produced good estimates of horizontal and vertical hydraulic conductivities and specific yield, but the estimated specific storage was unacceptable. When noisy data from the pumping well were used, an acceptable set of parameters was not obtained. Further experiments with noisy drawdown data in an unconfined aquifer revealed that when the well diameter was included in the analysis, hydraulic conductivity, specific yield and vertical hydraulic conductivity may be estimated rather effectively from piezometers located over a range of distances from the pumping well. Estimation of specific storage became less reliable for piezemeters located at distances greater than the initial saturated thickness of the aquifer. Application of the NLS to field pumping and recovery data from a confined aquifer showed that the estimated parameters from the two tests were in good agreement only when the well diameter was included in the analysis. Without consideration of well radii, the estimated values of hydraulic conductivity from the pumping and recovery tests were off by a factor of four.The nonlinear least squares method was applied to pumping and recovery aquifer test data in

  14. Eddy current testing with high penetration; WS-Pruefungen mit grosser Eindringtiefe

    Energy Technology Data Exchange (ETDEWEB)

    Becker, R.; Kroening, M. [Fraunhofer Inst. fuer Zerstoerungsfreie Pruefverfahren, Saarbruecken (Germany)

    1999-08-01

    The low-frequency eddy current testing method is used when penetration into very deep layers is required. The achievable penetration depth is determined among other parameters by the lowest testing frequency that can be realised together with the eddy current sensor. When using inductive sensors, the measuring effect declines proportional to the lowering frequency (induction effect). Further reduction of testing frequency requires other types of sensors, as e.g. the GMR (Giant Magnetic Resistance), which achieves a constant measuring sensitivity down to the steady field. The multi-frequency eddy current testing method MFEC 3 of IZFP described here can be operated using three different scanning frequencies at a time. Two variants of eddy current probes are used in this case. Both have an inductive winding at their emitters, of the type of a measuring probe. The receiver end is either also an inductive winding, or a magnetic field-responsive resistance (GMR). (orig./CB) [Deutsch] Das Niederfrequenz(NF)-Wirbelstrom(WS)-Verfahren wird eingesetzt, um eine grosse Eindringtiefe zu erzielen. Die erreichbare Tiefenreichweite wird u.a. durch die niedrigste Prueffrequenz bestimmt, die zusammen mit dem Wirbelstrom-Sensor realisiert werden kann. Bei Einsatz von induktiven Sensoren geht mit abnehmender Prueffrequenz der Messeffekt proportional zurueck (Induktionswirkung). Eine weitere Absenkung der Prueffrequenzen macht den Einsatz von andersartigen Sensoren notwendig, z.B. den GMR (Giant Magnetic Resistance), der eine gleichmaessige Messempfindlichkeit bis zum Gleichfeld besitzt. Das eingesetzte Mehrfrequenz-Wirbelstrom-Pruefverfahren MFEC 3 des IZFP arbeitet mit drei gleichzeitig eingespeisten Prueffrequenzen. Dabei werden zwei Varianten von WS-Sensoren eingesetzt. Beide besitzen auf der Senderseite eine induktive Wicklung in der Art einer Tastsonde. Die Empfaengerseite ist entweder ebenfalls eine induktive Wicklung oder ein magnetfeldempfindlicher Widerstand (GMR). (orig./DGE)

  15. Eddy current testing with high penetration; WS-Pruefungen mit grosser Eindringtiefe

    Energy Technology Data Exchange (ETDEWEB)

    Becker, R.; Kroening, M. [Fraunhofer Inst. fuer Zerstoerungsfreie Pruefverfahren, Saarbruecken (Germany)

    1999-08-01

    The low-frequency eddy current testing method is used when penetration into very deep layers is required. The achievable penetration depth is determined among other parameters by the lowest testing frequency that can be realised together with the eddy current sensor. When using inductive sensors, the measuring effect declines proportional to the lowering frequency (induction effect). Further reduction of testing frequency requires other types of sensors, as e.g. the GMR (Giant Magnetic Resistance), which achieves a constant measuring sensitivity down to the steady field. The multi-frequency eddy current testing method MFEC 3 of IZFP described here can be operated using three different scanning frequencies at a time. Two variants of eddy current probes are used in this case. Both have an inductive winding at their emitters, of the type of a measuring probe. The receiver end is either also an inductive winding, or a magnetic field-responsive resistance (GMR). (orig./CB) [Deutsch] Das Niederfrequenz(NF)-Wirbelstrom(WS)-Verfahren wird eingesetzt, um eine grosse Eindringtiefe zu erzielen. Die erreichbare Tiefenreichweite wird u.a. durch die niedrigste Prueffrequenz bestimmt, die zusammen mit dem Wirbelstrom-Sensor realisiert werden kann. Bei Einsatz von induktiven Sensoren geht mit abnehmender Prueffrequenz der Messeffekt proportional zurueck (Induktionswirkung). Eine weitere Absenkung der Prueffrequenzen macht den Einsatz von andersartigen Sensoren notwendig, z.B. den GMR (Giant Magnetic Resistance), der eine gleichmaessige Messempfindlichkeit bis zum Gleichfeld besitzt. Das eingesetzte Mehrfrequenz-Wirbelstrom-Pruefverfahren MFEC 3 des IZFP arbeitet mit drei gleichzeitig eingespeisten Prueffrequenzen. Dabei werden zwei Varianten von WS-Sensoren eingesetzt. Beide besitzen auf der Senderseite eine induktive Wicklung in der Art einer Tastsonde. Die Empfaengerseite ist entweder ebenfalls eine induktive Wicklung oder ein magnetfeldempfindlicher Widerstand (GMR). (orig./DGE)

  16. Computational fluid dynamic analysis of a closure head penetration in a pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Forsyth, D.R.; Schwirian, R.E. [Westinghouse Electric Corp., Pittsburgh, PA (United States)

    1995-09-01

    ALLOY 600 has been used typically for penetrations through the closure head in pressurized water reactors because of its thermal compatibility with carbon steel, superior resistance to chloride attack and higher strength than the austenitic stainless steels. Recent plant operating experience with this alloy has indicated that this material may be susceptible to degradation. One of the major parameters relating to degradation of the head penetrations are the operational temperatures and stress levels in the penetration.

  17. Comparison of standard penetration test methods on bearing capacity of shallow foundations on sand

    Directory of Open Access Journals (Sweden)

    Scott Bernard Akpila

    2013-03-01

    Full Text Available A comparison of standard penetration test methods on bearing capacity analysis of shallow foundations on sand using analytical methods proposed by Parry, Meyerhof and modified Meyerhof has been carried out. The results showed three bound limits; upper, middle and lower bonds of net allowable bearing capacity, qn(a, values for isolated pad foundations placed on sand. Perry’s method gave higher values followed by the modified Meyerhof’s method and lastly by the Meyerhof’s method. Generally, qn(a showed a decreasing trend as foundation breadth and depth increased. The qn(a of modified Meyerhof’s model can be approximated by applying a factor of safety, FS, of 3.25 on Perry’s model. Similarly, qn(a of Meyerhof’s model can be approximated by applying a factor of safety, FS, of 2.0 on the modified Meyerhof’s model.

  18. Possibilities of ground penetrating radar usage within acceptance tests of rigid pavements

    Science.gov (United States)

    Stryk, Josef; Matula, Radek; Pospisil, Karel

    2013-10-01

    Within the road pavement acceptance tests, destructive as well as non-destructive tests of individual road layers are performed to verify the standard requirements. The article describes a method for providing quick, effective and sufficiently accurate measurements of both dowel and tie bar positions in concrete pavements, using a two-channel ground penetrating radar (GPR). Measurements were carried out in laboratory and in-situ conditions. A special hand cart for field measurements, set for the testing requirements, was designed. It was verified that following the correct measuring and assessment method, it is possible to reach accuracy of determining the in-built rebar up to 1 cm in vertical direction and up to 1.5 cm per 11.5 m of measured length in horizontal direction. In the in-situ tests, GPR identification of possible anomalies due to the phase of concrete pavement laying was presented. In the conclusion, a measurement report is mentioned. The standard requirements for the position of dowels and tie bars cover maximum possible deviation of the rebar position from the project documentation in vertical and horizontal direction, maximum deflection of rebar ends to each other, and maximum translation of rebar in the direction of its longitudinal axis.

  19. Transdermal cellular membrane penetration of proteins with gold nanoparticles: a molecular dynamics study.

    Science.gov (United States)

    Gupta, Rakesh; Kashyap, Nishi; Rai, Beena

    2017-03-15

    Transdermal delivery, where the skin acts as the route for local or systemic distribution, presents a lot of advantages over conventional routes such as oral and intravenous and intramuscular injections. However, the delivery of large biomolecules like proteins through the skin is challenging due to their size and structural properties. A molecular level understanding of their transport across the skin barrier is desirable to design successful formulations. We have employed constrained and unconstrained coarse grained molecular dynamics simulation techniques to obtain the molecular mechanism of penetration of the horseradish peroxidase (HRP) protein into the skin, in the presence and absence of gold nanoparticles (AuNPs). Unconstrained simulations show that HRP, when considered individually, was not able to breach the skin barrier, while in the presence of AuNPs, it first binds to the AuNPs and then breaches the barrier. The constrained simulations revealed that there was a free energy barrier for HRP to permeate inside the skin lipid layer when taken alone, while in the presence of gold nanoparticles, no barrier was found. Our study opens up the field of computational modeling based design of nanoparticle carriers for a given protein's transdermal delivery.

  20. The Effect of Penetrator Geometry on the Dynamic Response of Woven Graphite/Epoxy Composites

    Science.gov (United States)

    Wosu, Sylvanus N.; Xie, Qiaoyun

    2014-03-01

    The primary focus on this paper is to study the high energy penetration/perforation damage propagation of composite plates using the perforation split Hopkinson pressure bar. The objectives include: investigation of propagation of penetration and surface crack damage in the vicinity perforation threshold velocity; investigation of energy absorption and strain intensity profiling; and quantitative analysis of the interactive effects of penetrator geometry and sample thickness on the perforation damage of woven graphite-epoxy composite plates. The results show that strain rate increased with damage energy threshold levels and decreased with sample thickness from below to above the perforation limit velocity on the average. There was a significant difference between penetrator geometries on a specimen strain rate, and penetrator size other than shape was a more important factor. As the size of the penetrator increased, the perforation energy thresholds increased accordingly. Thus, for the same energy level, the larger penetrator delivered more energy to the target. The mode of perforation failure was localized with obliquely shaped cracks for the woven specimens. It was conceivable that the cracks first initiate at the point of intersections of the weave and move in both directions. These results would provide some instructions in building, designing, and evaluating protective structures that undergo any penetration type of impact.

  1. Regressive approach for predicting bearing capacity of bored piles from cone penetration test data

    Directory of Open Access Journals (Sweden)

    Iyad S. Alkroosh

    2015-10-01

    Full Text Available In this study, the least square support vector machine (LSSVM algorithm was applied to predicting the bearing capacity of bored piles embedded in sand and mixed soils. Pile geometry and cone penetration test (CPT results were used as input variables for prediction of pile bearing capacity. The data used were collected from the existing literature and consisted of 50 case records. The application of LSSVM was carried out by dividing the data into three sets: a training set for learning the problem and obtaining a relationship between input variables and pile bearing capacity, and testing and validation sets for evaluation of the predictive and generalization ability of the obtained relationship. The predictions of pile bearing capacity by LSSVM were evaluated by comparing with experimental data and with those by traditional CPT-based methods and the gene expression programming (GEP model. It was found that the LSSVM performs well with coefficient of determination, mean, and standard deviation equivalent to 0.99, 1.03, and 0.08, respectively, for the testing set, and 1, 1.04, and 0.11, respectively, for the validation set. The low values of the calculated mean squared error and mean absolute error indicated that the LSSVM was accurate in predicting the pile bearing capacity. The results of comparison also showed that the proposed algorithm predicted the pile bearing capacity more accurately than the traditional methods including the GEP model.

  2. Study on Titanium Alloy TC4 Ballistic Penetration Resistance Part Ⅰ: Ballistic Impact Tests

    Institute of Scientific and Technical Information of China (English)

    ZHANG Tao; CHEN Wei; GUAN Yupu; GAO Deping

    2012-01-01

    Ballistic impact test of different-scale casings is an efficient way to demonstrate the casing containment capability at the preliminary design stage of the engine.For the sake of studying the titanium alloy TC4 casing performance,the ballistic tests of flat and curved simulation casing are implemented by using two flat blades of different sizes as the projectile.The impact mechanism and failure of the target are discussed.Impact of the projectile is a highly nonlinear transient process with the large deformation of the target.On the impact,failures of the flat casing and the subscale casing are similar,concluding two parts,the global dishing and localized ductile tearing.The main localized failure mode combines plugging (shear) and petaling (shear) if the projectile perforates or penetrates,while crater (shear) if the projectile rebounds.The ballistic limit equation is verified by the test data and the results show that this empirical equation could be a practical way to estimate the critical velocity.

  3. Can the biogenicity of Europa's surfical sulfur be tested simultaneously with penetrators and ion traps?

    Science.gov (United States)

    Chela-Flores, J.; Bhattacherjee, A. B.; Dudeja, S.; Kumar, N.; Seckbach, J.

    2009-04-01

    with microbial mats—well understood in the context of the Antarctic dry valley lakes for the expulsion of a large quantity of sulfur—are used in tests on the icy surface of Europa, it is pertinent to evaluate the stopping-depth for the harsh radiation on the Europan surface. Recently, we have estimated the stopping-depth that should be probed by penetrators in proposed missions, such as LAPLACE, or in future projects. We find, in agreement with others (Greenberg, 2005), that beyond a few millimeters a penetrator would be testing biogeochemistry without any interference from radiation effects (Dudeja et al., 2009). Simultaneously with the penetrators there is an alternative suitable technology available. The isotopic S fractionation on the cloud surrounding Europa should reflect to a large extent the same biogenically-driven S fractionation that is taking place on the surface. We should recall that the origin of the cloud is due to particles that have been expelled by hypervelocity impacts of micrometeoroids on the surface. The instrumentation of ion-trap mass spectrometry has already been successfully completed for tests on a comet nucleus (the Ptolemy instrument and the Rosetta space mission). Ion traps have once again been in the planning stages for their eventual application in LAPLACE, or elsewhere (Todd et al., 2006; Taylor et al., 2007). Since the cloud around Europa is constantly being replenished by the above-mentioned micrometeorites, it would be reasonable to expect the cloud to mirror the large S-isotope deviations that may be caused locally by the assumed sulfate-reducing microorganisms. Consequently, dust detectors in orbit around this satellite should record similar large fluctuations of the Luria-Delbrück type that we have conjectured to take place on Europa's icy surface. This possibility has been explained in detail recently (Chela-Flores and Kumar, 2008). Consequently, we argue in favor that the instrumentation to be selected should include

  4. Cone penetration and bevameter geotechnical tests in lunar regolith simulants: discrete element method analysis and experimentation

    Science.gov (United States)

    Kulchitsky, A. V.; Johnson, J.; Duvoy, P.; Wilkinson, A.; Creager, C. M.

    2012-12-01

    For in situ resource utilization on the Moon, asteroids, Mars, or other space body it is necessary to be able to simulate the interaction of mobile platforms and excavation machines with the regolith for engineering design, planning, and operations. For accurate simulations, tools designed to measure regolith properties will need to be deployed and interpreted. Two such tools are the penetrometer, used to measure a soil strength index as a function of depth, and the bevameter, used to characterize regolith surface properties of strength, friction and sinkage. The penetrometer interrogates regolith properties from the surface to a depth limited only by the capabilities of the instrument to penetrate the regolith while a bevameter interrogates only the upper few centimeters needed to describe a mobility platform's traction and sinkage. Interpretation of penetrometer and bevameter data can be difficult, especially on low gravity objects. We use the discrete element method (DEM) model to simulate the large regolith deformations and failures associated with the tests to determine regolith properties. The DEM simulates granular material behavior using large aggregates of distinct particles. Realistic physics of particle-particle interaction introduces many granular specific phenomena such as interlocking and force chain formation that cannot be represented using continuum methods. In this work, experiments using a cone penetrometer test (CPT) and bevameter on lunar simulants JSC-1A and GRC-1 were performed at NASA Glenn Research Center. These tests were used to validate the physics in the COUPi DEM model. COUPi is a general physical DEM code being developed to model machine/regolith interactions as part of a NASA Lunar Science Institute sponsored project on excavation and mobility modeling. The experimental results were used in this work to build an accurate model to simulate the lunar regolith. The CPT consists of driving an instrumented cone with opening angle of 60

  5. The impact of light-colored pavements on active layer dynamics revealed by Ground-Penetrating Radar monitoring

    DEFF Research Database (Denmark)

    Jørgensen, Anders Stuhr; Ingeman-Nielsen, Thomas

    2008-01-01

    Ground-penetrating radar (GPR) has been used to study the variations in the depth of the frost table throughout a complete thaw-freeze season in Kangerlussuaq Airport, western Greenland. In autumn 2000, three test areas were painted white on the parking area of the airport in order to reduce...

  6. Evaluation of Post-liquefaction Reconsolidation Settlement based on Standard Penetration Tests (SPT

    Directory of Open Access Journals (Sweden)

    AlketaNdoj

    2014-11-01

    Full Text Available This paper aims to deal with the evaluation of post-liquefaction reconsolidation settlement of soils using Standard Penetration Tests data. Evaluation of the settlement is conducted at Semani site in Albania, according to the SPT method presented by Idriss and Boulanger 2008, 2010. The input data for the SPT method are SPT borings with depth, moment magnitude of the earthquake, maximum surface acceleration during earthquake, depth to ground water table, and the unit weights of the soils. The calculation procedure includes estimation of the cyclic stress ratio induced in the soil by the earthquake, cyclic resistance ratio that will cause liquefaction, factor of safety against the triggering of liquefaction, post-liquefaction strain and of the post-liquefaction reconsolidation settlement. The results of the calculations utilizing this procedure are shown in graphs and are compared to those based on CPT method. It is observed that the calculated post-liquefaction reconsolidation settlements based on SPT method are less than ones calculated based on CPT method.

  7. Standard penetration test-based probabilistic and deterministic assessment of seismic soil liquefaction potential

    Science.gov (United States)

    Cetin, K.O.; Seed, R.B.; Der Kiureghian, A.; Tokimatsu, K.; Harder, L.F.; Kayen, R.E.; Moss, R.E.S.

    2004-01-01

    This paper presents'new correlations for assessment of the likelihood of initiation (or triggering) of soil liquefaction. These new correlations eliminate several sources of bias intrinsic to previous, similar correlations, and provide greatly reduced overall uncertainty and variance. Key elements in the development of these new correlations are (1) accumulation of a significantly expanded database of field performance case histories; (2) use of improved knowledge and understanding of factors affecting interpretation of standard penetration test data; (3) incorporation of improved understanding of factors affecting site-specific earthquake ground motions (including directivity effects, site-specific response, etc.); (4) use of improved methods for assessment of in situ cyclic shear stress ratio; (5) screening of field data case histories on a quality/uncertainty basis; and (6) use of high-order probabilistic tools (Bayesian updating). The resulting relationships not only provide greatly reduced uncertainty, they also help to resolve a number of corollary issues that have long been difficult and controversial including: (1) magnitude-correlated duration weighting factors, (2) adjustments for fines content, and (3) corrections for overburden stress. ?? ASCE.

  8. [Correlation of the penetration test of zona-free hamster ovocytes and other sperm parameters. Value of this test in evaluating male infertility].

    Science.gov (United States)

    Leroy-Martin, B; Saint Pol, P; Bouhdida, M; Hermand, E

    1989-01-01

    On investigating infertility in 162 couples the zona-free hamster egg penetration test was carried out. As a control we tested the ejaculates of 34 fertile men. There is a significant correlation between the percentage of oocytes that were penetrated and the count (p less than 0.001) in motility after one hour (p less than 0.001) and the count after migration (p less than 0.001). The outcome in 129 infertile couples made it possible for us to confirm that the percentage of oocytes penetrated, the initial motility and the number of motile sperms after migration are the best parameters for assessing sperm function that are known (p much less than 0.001) for investigating male fertility. Finally a study of the test in fertile sperm donors made it possible for us to raise statistically significantly the numbers of pregnancies per artificial insemination cycle when the percentage of oocytes penetrated is higher than 50% (p much less than 0.001). Although the egg penetration test did not prove male sterility it can be considered an extra test to be carried out over and above the sperm count and post-coital test in evaluating the fertilisation capacity of sperm.

  9. Ground penetrating radar for determining volumetric soil water content ; results of comparative measurements at two test sites

    NARCIS (Netherlands)

    Overmeeren, R.A. van; Sariowan, S.V.; Gehrels, J.C.

    1997-01-01

    Ground penetrating radar (GPR) can provide information on the soil water content of the unsaturated zone in sandy deposits via measurements from the surface, and so avoids drilling. Proof of this was found from measurements of radar wave velocities carried out ten times over 13 months at two test si

  10. Testing sea-level markers observed in ground-penetrating radar data from Feddet, south-eastern Denmark

    DEFF Research Database (Denmark)

    Hede, Mikkel Ulfeldt; Nielsen, Lars; Clemmensen, Lars B

    2012-01-01

    Ground-penetrating radar (GPR) data have been collected across the modern part (test identification of sea-level markers in GPR data from microtidal depositional environments. Nielsen and Clemmensen (2009) showed that iden......Ground-penetrating radar (GPR) data have been collected across the modern part (... that identified downlap points in GPR data from Anholt (an island in the Kattegat Sea, Denmark) can be interpreted to mark sea level at the time of deposition. The data presented here support this hypothesis. The GPR reflection data have been acquired with shielded 250 MHz Sensors & Software antennae along...

  11. Development of phased array ultrasonic testing in lieu of radiography for testing complete joint penetration (CJP) welds

    Science.gov (United States)

    Haldipur, P.; Boone, Shane D.

    2014-04-01

    The past decade has seen new, emerging innovation of Ultrasonic Testing (UT). Specifically, multiple manufacturers have produced Phased Array Ultrasonic Testing (PAUT) systems. The PAUT systems embed a matrix of multiple (some up to 128) single transducers into one probe used for scanning elastic materials. Simultaneously exciting multiple transducers offers distinct advantages; depending on the sequencing of transducer excitation, the ultrasonic beam could be steered within the material and multiple beams help develop extra dimensional data to assist with visualization of possible flaws including the discontinuity size, shape and location. Unfortunately, there has not been broad acceptance of PAUT in the bridge fabrication industry because it is currently not a recognized inspection technology in AWS D1.5. One situation in which the technology would excel would be inspection of Complete Joint Penetration (CJP) butt welds. Currently, AWS D1.5 required CJP welds subjected to tensile or reversal stresses only be inspected by Radiographic Testing (RT). However, discontinuities normally seen by RT can also be seen with PAUT. Until specification language is adopted into D1.5, there will continue to be hesitancy to use PAUT for the inspection of CJP butt welds. Developmental work must first be performed to develop the acceptance criteria and the specification language. The developmental work from the inspections carried out on butt-weld specimens and transition butt-weld specimens are presented in this paper. Specific scan plans were developed using the ES-Beam simulation software for each of the test specimens. In depth analysis of PAUT data obtained to determine exact location and sizing information of the defects was performed. The results also present the comparison of results from PAUT to those obtained using conventional UT and radiography.

  12. Flow to partially penetrating wells in unconfined heterogeneous aquifers: Mean head and interpretation of pumping tests

    Science.gov (United States)

    Dagan, G.; Lessoff, S. C.

    2011-06-01

    A partially penetrating well of length Lw and radius Rw starts to pump at constant discharge Qw at t = 0 from an unconfined aquifer of thickness D. The aquifer is of random and stationary conductivity characterized by KG (geometric mean), σY2 (log conductivity variance), and I and Iv (the horizontal and vertical integral scales). The flow problem is solved under a few simplifying assumptions commonly adopted in the literature for homogeneous media: Rw/Lw ≪ 1, linearization of the free surface condition, and constant drainable porosity n. Additionally, it is assumed that Rw/I and the associated water table equation. The main result of the analysis is that the flow domain can be divided into three zones for : (1) the neighborhood of the well R ≪ I, where = (Qw/LwKA)h0(R, z, tKefuv/nD), with h0 being the zero-order solution pertaining to a homogeneous and isotropic aquifer, KA being the conductivity arithmetic mean, and Kefuv being the effective vertical conductivity in mean uniform flow, (2) an exterior zone R ⪆ I in which ?H? = (Qw/LwKefuh)h0(R?, z, tKefuv/nD), with Kefuh being the horizontal effective conductivity, and (3) an intermediate zone in which the solution requires a few numerical quadratures, not carried out here. The application to pumping tests reveals that identification of the aquifer parameters for homogeneous and anisotropic aquifers by commonly used methods can be applied for the drawdown measured in an observation well of length Low?Iv (to ensure exchange of space and ensemble head averages) in the second zone in order to identify Kefuh, Kefuv, and n. In contrast, the use of the drawdown in the well (first zone) leads to an overestimation of Kefuh by the factor KA/Kefuh.

  13. A multibody dynamics model of contact between the drillstring and the wellbore and the rock penetration process

    Directory of Open Access Journals (Sweden)

    Ningyu Wang

    2015-05-01

    Full Text Available This article models the contact between the drillstring with large slenderness ratio and the extending rigid wellbore based on the multibody dynamics method. The drillstring is modeled as absolute nodal coordinate formulation beams with contact detection points. An algorithm is developed to locate the contact points and calculate the contact forces when the drillstring is sliding and rotating in the wellbore. This provides support force and friction for the moving drillstring and effectively confines it inside the wellbore. A rock penetration model is established based on the rock-breaking velocity equation. The governing equation for the full-hole drilling system including the drillstring and the contact model is established and solved. A rock penetration correction method is proposed to stabilize the computation and to model and simulate the slide drilling process. A field drilling process is modeled and simulated. The simulation result fits the experimental result well.

  14. Standard practice for visible penetrant testing using the Water-Washable process

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice describes procedures for visible liquid penetrant examination utilizing the water-washable process. It is a nondestructive practice for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks or lack of fusion and is applicable to in-process, final, and maintenance examination. This practice can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics, and certain nonporous plastics, and glass. 1.2 This practice also provides the following references: 1.2.1 A reference by which visible penetrant examination procedures using the water-washable process can be reviewed to ascertain their applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the visible, water-washable liquid penetrant examination of materials and parts. Agreement between the user...

  15. Penetrating Annulus Fibrosus Injuries Affect Dynamic Compressive Behaviors of the Intervertebral Disc Via Altered Fluid Flow: An Analytical Interpretation

    OpenAIRE

    Michalek, Arthur J.; Iatridis, James C.

    2011-01-01

    Extensive experimental work on the effects of penetrating annular injuries indicated that large injuries impact axial compressive properties of small animal intervertebral discs, yet there is some disagreement regarding the sensitivity of mechanical tests to small injury sizes. In order to understand the mechanism of injury size sensitivity, this study proposed a simple one dimensional model coupling elastic deformations in the annulus with fluid flow into and out of the nucleus through both ...

  16. Cone penetration tests and soil borings at the Mason Road site in Green Valley, Solano County, California

    Science.gov (United States)

    Bennett, Michael J.; Noce, Thomas E.; Lienkaemper, James J.

    2011-01-01

    In support of a study to investigate the history of the Green Valley Fault, 13 cone penetration test soundings and 3 auger borings were made at the Mason Road site in Green Valley, Solano County, California. Three borings were made at or near two of the cone penetration test soundings. The soils are mostly clayey with a few sandy layers or lenses. Fine-grained soils range from low plasticity sandy lean clay to very plastic fat clay. Lack of stratigraphic correlation in the subsurface prevented us from determining whether any channels had been offset at this site. Because the soils are generally very clayey and few sand layers or lenses are loose, the liquefaction potential at the site is very low.

  17. Component Based Dynamic Reconfigurable Test System

    Institute of Scientific and Technical Information of China (English)

    LAI Hong; HE Lingsong; ZHANG Dengpan

    2006-01-01

    In this paper, a novel component based framework of test system is presented for the new requirements of dynamic changes of test functions and reconfiguration of test resources. The complexity of dynamic reconfiguration arises from the scale, redirection, extensibility and interconnection of components in test system. The paper is started by discussing the component assembly based framework which provide the open platform to the deploy of components and then the script interpreter model is introduced to dynamically create the components and build the test system by analyzing XML based information of test system. A pipeline model is presented to provide the data channels and behavior reflection among the components. Finally, a dynamic reconfigurable test system is implemented on the basis of COM and applied in the remote test and control system of CNC machine.

  18. Multi-offset ground-penetrating radar imaging of a lab-scale infiltration test

    Directory of Open Access Journals (Sweden)

    A. R. Mangel

    2012-11-01

    Full Text Available A lab scale infiltration experiment was conducted in a sand tank to evaluate the use of time-lapse multi-offset ground-penetrating radar (GPR data for monitoring dynamic hydrologic events in the vadose zone. Sets of 21 GPR traces at offsets between 0.44–0.9 m were recorded every 30 s during a 3 h infiltration experiment to produce a data cube that can be viewed as multi-offset gathers at unique times or common offset images, tracking changes in arrivals through time. Specifically, we investigated whether this data can be used to estimate changes in average soil water content during wetting and drying and to track the migration of the wetting front during an infiltration event. For the first problem we found that normal-moveout (NMO analysis of the GPR reflection from the bottom of the sand layer provided water content estimates ranging between 0.10–0.30 volumetric water content, which underestimated the value determined by depth averaging a vertical array of six moisture probes by 0.03–0.05 volumetric water content. Relative errors in the estimated depth to the bottom of the 0.6 m thick sand layer were typically on the order of 2%, though increased as high as 25% as the wetting front approached the bottom of the tank. NMO analysis of the wetting front reflection during the infiltration event generally underestimated the depth of the front with discrepancies between GPR and moisture probe estimates approaching 0.15 m. The analysis also resulted in underestimates of water content in the wetted zone on the order of 0.06 volumetric water content and a wetting front velocity equal to about half the rate inferred from the probe measurements. In a parallel modeling effort we found that HYDRUS-1D also underestimates the observed average tank water content determined from the probes by approximately 0.01–0.03 volumetric water content, despite the fact that the model was calibrated to the probe data. This error suggests that the assumed conceptual

  19. Realistic dynamic stope support testing

    CSIR Research Space (South Africa)

    Ortlepp, WD

    2000-08-01

    Full Text Available ...........................................9 5.2 Proof tests.................................................................10 5.3 Free standing tests on Mondi packs............................11 5.4 Test on Elbroc rapid-yield hydraulic props ............... 11 5.5 Six 200 mm dia... Ebenhauser 2000 timber elongates......13 6 Video Monitoring.........................................................15 7 Acknowledgement ......................................................17 Photographs 1 to 11 Figures 1 to 7 Appendix 1 GAP 611...

  20. Penetration of rod projectiles in semi-infinite targets : a validation test for Eulerian X-FEM in ALEGRA.

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung Yoon; Leavy, Richard Brian [U.S. Army Research Laboratory, Aberdeen Proving Grounds, MD; Niederhaus, John Henry J.

    2013-03-01

    The finite-element shock hydrodynamics code ALEGRA has recently been upgraded to include an X-FEM implementation in 2D for simulating impact, sliding, and release between materials in the Eulerian frame. For validation testing purposes, the problem of long-rod penetration in semi-infinite targets is considered in this report, at velocities of 500 to 3000 m/s. We describe testing simulations done using ALEGRA with and without the X-FEM capability, in order to verify its adequacy by showing X-FEM recovers the good results found with the standard ALEGRA formulation. The X-FEM results for depth of penetration differ from previously measured experimental data by less than 2%, and from the standard formulation results by less than 1%. They converge monotonically under mesh refinement at first order. Sensitivities to domain size and rear boundary condition are investigated and shown to be small. Aside from some simulation stability issues, X-FEM is found to produce good results for this classical impact and penetration problem.

  1. In-vitro cervical mucus-sperm penetration tests and outcome of infertility treatments in couples with repeatedly negative post-coital tests.

    Science.gov (United States)

    Farhi, J; Valentine, A; Bahadur, G; Shenfield, F; Steele, S J; Jacobs, H S

    1995-01-01

    The results of in-vitro cervical mucus-sperm penetration tests and cross-hostility tests in 178 couples with repeatedly negative post-coital tests were recorded. Using a protocol of three cycles with intra-uterine inseminations (IUI) followed by three cycles with ovulation induction + IUI, the association between the cause of infertility, results of the in-vitro tests and the outcome of infertility treatment was investigated. We found that repeatedly negative post-coital tests are a good indicator of a cervical mucus-sperm penetration problem. The cross-hostility test clearly differentiates the abnormal factor in this interaction, and a good performance of the donors' spermatozoa in the cervical mucus correlates with increased pregnancy rate. In male factor infertility, failure of the husbands' spermatozoa to penetrate cervical mucus was not indicative of a deficient fertilization potential in vivo. In these patients a serious attempt should therefore be made to reverse the infertility by treatment with IUI or ovulation induction + IUI before attempting assisted reproduction. Women with polycystic ovaries and repeatedly negative post-coital tests should be investigated for sperm receptivity of the cervical mucus. Low receptivity of the cervical mucus may imply that endometrial receptivity and oocyte quality are also low. Ovulation induction and not IUI alone should therefore be used as the preferred mode of treatment to improve pregnancy rate.

  2. The sperm penetration test (P-test) can predict fecundability in the male partner from infertile couples

    DEFF Research Database (Denmark)

    Bostofte, E; Bagger, P; Michael, A;

    1992-01-01

    Three hundred and twenty-one consecutive couples were investigated for infertility at Hvidovre University Hospital in the period from November 1977 to June 1985. The male partners were evaluated in two ways: the classical semen analysis, and the ability of sperm to penetrate fresh hen egg white...

  3. Cone Penetration Testing, a new approach to quantify coastal-deltaic land subsidence by peat consolidation

    Science.gov (United States)

    Koster, Kay; Erkens, Gilles; Zwanenburg, Cor

    2016-04-01

    It is undisputed that land subsidence threatens coastal-deltaic lowlands all over the world. Any loss of elevation (on top of sea level rise) increases flood risk in these lowlands, and differential subsidence may cause damage to infrastructure and constructions. Many of these settings embed substantial amounts of peat, which is, due to its mechanically weak organic composition, one of the main drivers of subsidence. Peat is very susceptible to volume reduction by loading and drainage induced consolidation, which dissipates pore water, resulting in a tighter packing of the organic components. Often, the current state of consolidation of peat embedded within coastal-deltaic subsidence hotspots (e.g. Venice lagoon, Mississippi delta, San Joaquin delta, Kalimantan peatlands), is somewhere between its initial (natural) and maximum compressed stage. Quantifying the current state regarding peat volume loss, is of utmost importance to predict potential (near) future subsidence when draining or loading an area. The processes of subsidence often afflict large areas (>103 km2), thus demanding large datasets to assess the current state of the subsurface. In contrast to data describing the vertical motions of the actual surface (geodesy, satellite imagery), subsurface information applicable for subsidence analysis are often lacking in subsiding deltas. This calls for new initiatives to bridge that gap. Here we introduce Cone Penetration Testing (CPT) to quantify the amount of volume loss peat layers embedded within the Holland coastal plain (the Netherlands) experienced. CPT measures soil mechanical strength, and hundreds of thousands of CPTs are conducted each year on all continents. We analyzed 28 coupled CPT-borehole observations, and found strong empirical relations between volume loss and increased peat mechanical strength. The peat lost between ~20 - 95% of its initial thickness by dissipation of excess pore water. An increase in 0.1 - 0.4 MPa of peat strength is

  4. Accuracy of sperm-cervical mucus penetration tests in evaluating sperm motility in semen: a systematic quantitative review.

    Science.gov (United States)

    Ola, Bolarinde; Afnan, Masoud; Papaioannou, Spyros; Sharif, Khaldoun; Björndahl, Lars; Coomarasamy, Aravinthan

    2003-05-01

    Our objective was to determine the accuracy of in-vitro sperm penetration into cervical mucus or substitutes in evaluating sperm motility in semen. This was a systematic quantitative review of test accuracy studies. The Cochrane library (2000:4), Medline (1966-2001), Embase (1988-2001) and SciSearch (1981-2001) were searched, in addition to manual searches of conference papers and bibliographies of known primary and review articles. Primary studies measuring in-vitro sperm penetration into cervical mucus, or substitutes (i.e. sperm-mucus penetration test, SMPT) and comparing results with sperm motility in semen were included. There were 18 primary diagnostic studies published in 17 papers, involving a total of 2580 samples. Fourteen primary diagnostic tests used vanguard distance as diagnostic criteria (SMPT(vd)) and the pooled likelihood ratio (LR) for positive (LR+) and negative (LR-) tests were 2.29 (1.82-2.87) and 0.52 (0.44-0.63) respectively. Four studies used diagnostic criteria based directly or indirectly on swim-up sperm count per high power field (SMPT(sc)) instead. Their pooled LR+ and LR- were 5.24 (3.36-8.18) and 0.15 (0.06-0.39) respectively. SMPT(vd) has a low accuracy in the evaluation of sperm motility in semen. However, SMPT(sc) was found to be more accurate. This method of using sperm concentration, instead of vanguard distance, as diagnostic criteria of in-vitro SMPT has potential as a useful laboratory-based sperm function test.

  5. Building a Penetration Testing Device for Black Box using Modified Linux for Under $50

    Directory of Open Access Journals (Sweden)

    Young B. Choi

    2017-01-01

    Full Text Available This study analyzes the use of a Raspberry Pi (RPi as part of a Penetration Tester’s toolkit. The RPi’s form factor, performance to cost ratio, used in conjunction with modified Linux, allows the RPi to be a very versatile product. Whatsmore, the RPi retails for $35 and is available from many hobby shops and on Amazon.com. Included in this research is the use of a virtual lab where the RPi is attached using an Ethernet connection. Simple attacks are carried out with a few suggestions for preventing this scenario from playing out in the real world.

  6. Terminal Ballistics Test and Analysis Guidelines for the Penetration Mechanics Branch

    Science.gov (United States)

    1992-01-01

    custom- made, replaceable 26.mm smoothbore barrel. The hot propellant gases progressively erode the gun bore at the breech end of the barrel. The erosion...travels down the tube. The launch package is inse -ed using a special fixture and rammed in to place with a hydraulic jack. 2.2 The Flash X-ray System...rear surface of the carrier and penetrator. The obturator provides a gas seal to prevent the gases produced by the burning propellant from escaping In

  7. Model for the dynamics of liquid penetration into porous structures and its detection with the help of changes in ultrasonic attenuation

    OpenAIRE

    Daun, Matias

    2007-01-01

    The dynamics of liquid penetration into porous networks is important for many processes during the production and printing of paper. One commercially available device to measure liquid penetration indirectly uses the change of ultrasonic attenuation when a specimen is brought into contact with liquid. In order to interpret results obtained by this device the generation and detection of ultra-sound are modelled as functions of the Sender and the Receiver, their material properties, their diame...

  8. Effect of two ram sperm capacitating media on acrosome reaction and zona-free hamster oocyte penetration test

    Directory of Open Access Journals (Sweden)

    Silvia Ferrari

    2000-01-01

    Full Text Available An in vitro zona-free hamster oocyte penetration test was utilized in 24 trials in order to evaluate the capacitation media used for ram sperm. A pool of fresh semen was collected from three crossed breed rams. Two semen drops were washed by centrifugation and incubated in high ionic strength treatment (HIS or in a defined medium with HEPES, on heat ewe serum and heparin. After the incubation to promote capacitation, simplified triple-stain technique was used to evaluate the spontaneous acrosome reaction of the capacitated sperm. Superovulation in 96 golden hamsters was induced by PMSG and hCG. The oocytes were treated with hyaluronidase and trypsin to remove, respectively, the cumulus cells and the zona pellucida. Oocytes and capacitated sperm were incubated during 3 hours for further penetration. Then, oocytes were fixed and stained, being evaluated under phase contrast microscope. No significant statistical difference (p >; 0.05 was found between media, concerning the penetration rate of the capacitated sperm and between number of sperm viable with acrosome reaction after the capacitation treatment using two different media. It was concluded that both media utilized were effective in capacitating ram sperm.

  9. Spectroscopic investigation of the charge dynamics of heavy ions penetrating solid and gaseous targets

    Energy Technology Data Exchange (ETDEWEB)

    Korostiy, S.

    2007-01-15

    This thesis presents the study of the slowing down process of fast heavy ions inside matter. In the framework of this research, the influence of the target density on the stopping process is investigated. Experiments on the interaction of {sup 48}Ca{sup 6+}-{sup 48}Ca{sup 10+} and {sup 26}Mg{sup 5+} ion beams with initial energies of 11.4 MeV/u and 5.9 MeV/u with solid and gaseous targets have been carried out. A novel diagnostic method, X-ray spectroscopy of K-shell projectile radiation, is used to determine the ion charge state in relation to its velocity during the penetration of fast heavy ions inside the stopping material. A spatially resolved analysis of the projectile and target radiation in solids is achieved for the first time. The application of low-density silica aerogels as stopping media provided a stretching of the ion stopping length by 20 - 100 times in comparison with solid quartz. The Doppler Effect observed on the projectile K-shell spectra is used to calculate the ion velocity in dependence on the ion penetration depth in the target material. A comparative analysis of K{sub {alpha}} spectra of fast heavy ions is performed in solid (silica aerogels) and gaseous targets (Ar and Ne gases) at the same ion energy. It is shown that the dominant role of collisions in dense matter leads to an increase of the effective ionization cross section at high ion velocity and suppression of the electron capture to the projectile ion excited states at low ion velocity. As a result, an increase of the ion charge state in dense matter is observed. The experimentally detected effects are interpreted with numerical calculations of the projectile population kinetics, which are in good agreement with measurements. (orig.)

  10. Molecular dynamics simulation of impact test

    Energy Technology Data Exchange (ETDEWEB)

    Akahoshi, Y. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan); Schmauder, S.; Ludwig, M. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

    1998-11-01

    This paper describes an impact test by molecular dynamics (MD) simulation to evaluate embrittlement of bcc Fe at different temperatures. A new impact test model is developed for MD simulation. The typical fracture behaviors show transition from brittle to ductile fracture, and a history of the impact loads also demonstrates its transition. We conclude that the impact test by MD could be feasible. (orig.)

  11. Nonstationary plasma-thermo-fluid dynamics and transition in processes of deep penetration laser beam-matter interaction

    Science.gov (United States)

    Golubev, Vladimir S.; Banishev, Alexander F.; Azharonok, V. V.; Zabelin, Alexandre M.

    1994-09-01

    A qualitative analysis of the role of some hydrodynamic flows and instabilities by the process of laser beam-metal sample deep penetration interaction is presented. The forces of vapor pressure, melt surface tension and thermocapillary forces can determined a number of oscillatory and nonstationary phenomena in keyhole and weld pool. Dynamics of keyhole formation in metal plates has been studied under laser beam pulse effect ((lambda) equals 1.06 micrometers ). Velocities of the keyhole bottom motion have been determined at 0.5 X 105 - 106 W/cm2 laser power densities. Oscillatory regime of plate break- down has been found out. Small-dimensional structures with d-(lambda) period was found on the frozen cavity walls, which, in our opinion, can contribute significantly to laser beam absorption. A new form of periodic structure on the frozen pattern being a helix-shaped modulation of the keyhole walls and bottom relief has been revealed. Temperature oscillations related to capillary oscillations in the melt layer were discovered in the cavity. Interaction of the CW CO2 laser beam and the matter by beam penetration into a moving metal sample has been studied. The pulsed and thermodynamic parameters of the surface plasma were investigated by optical and spectroscopic methods. The frequencies of plasma jets pulsations (in 10 - 105 Hz range) are related to possible melt surface instabilities of the keyhole.

  12. Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1986-01-01

    1.1 This test method covers the determination of the resistance of flat plate solar collectors to water penetration when water is applied to their outer surfaces with a static air pressure at the outer surface higher than the pressure at the interior of the collector. 1.2 This test method is applicable to any flat plate solar collector. 1.3 The proper use of this test method requires a knowledge of the principles of pressure and deflection measurement. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary information is contained in Section 6.

  13. Methods for Dynamic Analysis of Distribution Feeders with High Penetration of PV Generators

    Energy Technology Data Exchange (ETDEWEB)

    Nagarajan, Adarsh; Ayyanar, Raja

    2016-11-21

    An increase in the number of inverter-interfaced photovoltaic (PV) generators on existing distribution feeders affects the design, operation, and control of the distribution systems. Existing distribution system analysis tools are capable of supporting only snapshot and quasi-static analyses. Capturing the dynamic effects of PV generators during the variation in distribution system states is necessary when studying the effects of controller bandwidths, multiple voltage correction devices, and anti-islanding. This work explores the use of dynamic phasors and differential algebraic equations (DAE) for impact analysis of PV generators on the existing distribution feeders.

  14. To the question on the factors of formation of the sands density and their potential accounting by cone penetration test

    Directory of Open Access Journals (Sweden)

    Kashperyuk Pavel

    2017-01-01

    Full Text Available Undisturbed sampling of sands from boreholes is difficult. It is important to find methods for determining the sands density in-situ, in particular, by cone penetration test. According to the results of cone penetration test can be determined only the categories of relative density of sands depending on their size distribution and probing depth. Based on an extensive literary material and long-term studies of the authors were considered a number of factors, which form the natural density of sands with different particle size distribution and genesis. For improving the accuracy, it is necessary to consider not only the particle size distribution, but also morphological features of grains, primarily depending on the genesis. The most versatile and effective indicator of the morphological features of grains is generalized morphological index λ (by A.D. Potapov. Taking into account that the empirical formula for quantitative assessment of the sands density by cone resistance (by L.G. Mariupolskiy, in our opinion, applicable only for average-size sands without considering of their uniformity, genesis and generalized morphological index, content of silt and clay fraction, water saturation and presence of cohesion-hardening, we offer new correlations between dry soils density and cone resistance for different genetic types of sand.

  15. Dynamic Response Testing in an Electrically Heated Reactor Test Facility

    Science.gov (United States)

    Bragg-Sitton, Shannon M.; Morton, T. J.

    2006-01-01

    Non-nuclear testing can be a valuable tool in the development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and fueled nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe (HP) cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system. Reactivity feedback calculations were then based on a bulk reactivity feedback coefficient and measured average core temperature. This paper presents preliminary results from similar dynamic testing of a direct drive gas cooled reactor system (DDG), demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. Although the HP and DDG designs both utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility. Planned system upgrades to allow implementation of higher fidelity dynamic testing are also discussed. Proposed DDG

  16. Evaluation of Liquefaction Return Period for Bangalore Based on Standard Penetration Test Data: Performance Based Approach

    Directory of Open Access Journals (Sweden)

    K. S. Vipin

    2009-01-01

    Full Text Available Problem statement: The conventional liquefaction evaluation is based on a deterministic approach. However in this method the uncertainty in the earthquake loading is not properly taken into account. However recent research in this field indicates that this uncertainty in the earthquake loading has to be considered in the liquefaction potential evaluation. Moreover the evaluation of liquefaction return period is not possible in the conventional deterministic methods. This study explained the methods for evaluating the probability of liquefaction and the return period of liquefaction based on probabilistic approach. Approach: In this study the geotechnical data was collected from 450 bore holes in Bangalore, India, covering an area of 220 km2. The seismic hazard analysis for the study area is carried out using Probabilistic Seismic Hazard Analysis (PSHA and the peak acceleration at ground surface was evaluated for site class-D after considering local site effects. For assessment of site class, shear wave velocity profiles in the city had been obtained using Multichannel Analysis of Surface Waves (MASW survey. Based on this data the probabilistic liquefaction analysis was done to evaluate the probability of liquefaction in the study area. Based on the performance based approach the liquefaction return period for the study area was also evaluated. Results: The results showed the variation of liquefaction susceptibility for the study area. The corrected standard penetration values required to prevent the liquefaction for return periods of 475 and 2500 years were also presented here. Conclusion/Recommendations: The spatial variation of probability of liquefaction and the factor of safety against liquefaction evaluated using the two methods match well for the study area.

  17. 49 CFR Appendix E to Part 178 - Flame Penetration Resistance Test

    Science.gov (United States)

    2010-10-01

    ... the test burner cone. (4) Thermocouples. The seven thermocouples to be used for testing must be 1/16 inch ceramic sheathed, type K, grounded thermocouples with a nominal 30 American wire gage (AWG) size conductor. The seven thermocouples must be attached to a steel angle bracket to form a thermocouple rake...

  18. New Test Facilities For GNSS Testing And Dynamic Calibration

    Directory of Open Access Journals (Sweden)

    Trzuskowsky Andreas

    2014-06-01

    Full Text Available With Galileo, the European GNSS (Global Navigation Satellite System starting early services in 2015, open-area-testing of applications which use the new positioning system gets more and more important. This contribution gives an overview on existing test sites like railGATE, automotiveGATE and seaGATE, it highlights the latest addition for dynamic calibration with geodetic precision and finally describes the testing regime of the BONUS project ANCHOR, where multiple test sites are used for maximum benefit in a maritime application.

  19. Dynamic Response Testing in an Electrically Heated Reactor Test Facility

    Science.gov (United States)

    Bragg-Sitton, Shannon M.; Morton, T. J.

    2006-01-01

    Non-nuclear testing can be a valuable tool in development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system (Bragg-Sitton, 2005). The current paper applies the same testing methodology to a direct drive gas cooled reactor system, demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. In each testing application, core power transients were controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. Although both system designs utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility.

  20. 空气排除与蒸汽渗透测试方法%Air removal and steam penetration test

    Institute of Scientific and Technical Information of China (English)

    胡昌明; 黄秀莲; 吕连生

    2011-01-01

    OBJECTIVE To introduce the test methods for air removal and steam penetration, which can be used to make sure the steam sterilizers in good condition to fill the requirements of SAL. METHODS We made the analysis and comparison of related international standards and found that these were bowie and dick-type test and Hollow load test according to the load processed by the steam sterilizers, national standards and pharmaceutical industry standards, explained the details of chemical indicators that used in test. RESULTS Bowie and Dick-type test and hollow test together formulated an integrated performance test of air removal and steam penetration, which could made a reasonable evaluation of the performance of steam sterilizer so as to ensure the aseptic level of sterilized items. CONCLUSION We suggest that the test methods can be used for the personnel deal with the sterilization work to precaution and control infection.%目的 介绍对蒸汽灭菌器进行空气排除和蒸汽渗透测试的方法,验证所使用的蒸汽灭菌器具备达到规定无菌水平的能力.方法 分析并比较相关国际、国家、医药行业标准,按负载类型测试方法分为BD类测试和空腔负载测试,对测试方法所使用的化学指示物等进行详细阐述.结果 BD类测试和空腔负载测试共同构成了较为全面的空气排除和蒸汽渗透性能测试,对预真空蒸汽灭菌器的性能作出合理评价,保证了灭菌物品的无菌保证水平.结论 这些测试方法可用于指导灭菌处理人员的实际工作,控制医院感染.

  1. Numerical analysis of dynamic variation of weld pool geometry in fully-penetrated TIG welding

    Institute of Scientific and Technical Information of China (English)

    Zhao Ming; Li Ruiying

    2008-01-01

    A mathematical model is developed for numerical analysis of thermal process in TIG welding with a moving arc, which is considered the double-elliptic distribution for both arc heat flux and arc pressure. An adjusting factor is introduced into the expression of arc pressure. The domain within which the arc heat flux is distributed non-symmetrically due to arc moving is selected appropriately, and three conditions for the domain to meet are described. The latent heat is taken into consideration by liquid fraction method. The dynamic development of weld pool geometry during TIG welding is analyzed numerically, and the effect of arc moving on the weld pool geometry is discussed. The experimental results show that the numerical analysis accuracy is obviously improved through taking the above-mentioned measures.

  2. 动力触探杆长适应性及其修正试验%Adaptation and Correction of Dynamic Penetration Rod Length

    Institute of Scientific and Technical Information of China (English)

    李会中; 郭飞; 傅少君; 郝文忠; 李志

    2016-01-01

    西部地区河床深厚覆盖层勘探取样及工程特性是水电工程地质勘察中常遇技术难题,动力触探(dynamic penetration test, DPT)因操作简单、适用土类多而成为西部地区河床覆盖层原位测试首选方法。现行规范仅给出了20 m 杆长范围的修正方法,但对超此范围重型、超重型动力触探杆长适用性及修正问题,长期以来业内则颇多争议却少有研究。鉴于此,利用现场试验与数值模拟相结合,通过对动力触探试验杆上各测点应变现场实测并得到各测点应力分布,再利用 LS-DYNA 软件进行反演分析并确定相关计算参数,而后进行杆长25 m、40 m、60 m、80 m、120 m 的数值模拟计算得到了杆长适用范围及修正系数。试验研究方法及成果可供类似问题研究与深厚覆盖层地区工程勘察借鉴或参考。%In the geotechnical investigation of hydropower projects in western China,exploratory sampling and engineering property research are challenging on account of the thick overburden on the riverbed.The dynamic penetration test(DPT)has become the preferred method of in-situ tests for the river overburden layers in western China due to its simple operation and ap-plicability for different soil types.The current standard only provides a correction method for the rod length within 20 m.For the problems of adaptation and correction of heavy and extra-heavy dynamic penetration rod length,there is always much con-troversy but rare research for a long time.To address this issue,a study is conducted,involving the following procedures. Firstly,combined with the field test and numerical simulation,the stress value of each monitoring point is obtained by monito-ring the rod of field DPT.Then,LS-DYNA software is used for inverse analysis and relevant parameters are determinined. Lastly,different rod lengths of DPT,such as 25 m,40 m,60 m,80 m and 120 m,are simulated,and the adaptation and cor-rection of rod length are

  3. Carrying out Penetration Testing by Kali Linux%利用Kali Linux开展渗透测试

    Institute of Scientific and Technical Information of China (English)

    雷惊鹏; 沙有闯

    2015-01-01

    随着网络技术的快速发展,特别是近年来各种Web技术的普遍升级,信息网络所面临的威胁日趋多样化.对于网络管理者而言,渗透测试(Penetration Testing)已成为保障网络安全的重要手段和方法.Kali Linux系统被设计成用于数字取证和渗透测试的专用平台.本文参考业界正在完善的PTES标准[1],结合Kali Linux系统本身的功能与特色,分析了渗透测试的思路与步骤.

  4. Multicomponent Diffusion of Penetrant Mixtures in Rubbery Polymers: A Molecular Dynamics Study

    Science.gov (United States)

    Bringuier, Stefan; Varady, Mark; Knox, Craig; Cabalo, Jerry; Pearl, Thomas; Mantooth, Brent

    The importance of understanding transport of chemical species across liquid-solid boundaries is of particular interest in the decontamination of harmful chemicals absorbed within polymeric materials. To characterize processes associated with liquid-phase extraction of absorbed species from polymers, it is necessary to determine an appropriate physical description of species transport in multicomponent systems. The Maxwell-Stefan (M-S) formulation is a rigorous description of mass transport in multicomponent solutions, in which, mutual diffusivities determine the degree of relative motion between interacting molecules in response to a chemical potential gradient. The work presented focuses on the determination of M-S diffusivities from molecular dynamics (MD) simulations of nerve agent O-ethyl S-[2(diisopropylamino)ethyl] methylphosphonothioate (VX), water, and methanol mixtures within a poly(dimethylsiloxane) matrix. We investigate the composition dependence of M-S diffusivities and compare the results to values predicted using empirical relations for binary and ternary mixtures. Finally, we highlight the pertinent differences in molecular mechanisms associated with species transport and employ non-equilibrium MD to probe transport across the mixture-polymer interface.

  5. Application of Poisson distribution theory to the zona-free hamster oocyte penetration test to assess sperm function of men with asthenozoospermia.

    Science.gov (United States)

    Aitken, R J; Elton, R A

    1986-05-01

    Assessments of the penetrating potential of human spermatozoa were carried out using the zona-free hamster oocyte penetration test on 4 groups of subjects exhibiting normal fertility, idiopathic asthenozoospermia(less than 40% motility), asthenozoospermia associated with varicocele and oligoaesthenozoospermia (less than 20 X 10(6) spermatozoa/ml and less than 40% motility). When the Poisson model was used to correct the results of the in-vitro penetration experiments for differences in motile sperm concentration, significant differences were apparent between the normal fertile controls and all 3 categories of asthenozoospermic patient. Furthermore, the penetrating ability of the motile spermatozoa from patients presenting with a varicocele or oligoaesthenozoospermia was significantly less than that for the group in which asthenozoospermia was the only detectable defect. These results emphasize the practical significance of the Poisson model in the analysis of male fertility and demonstrate that the asthenozoospermic condition is associated with a significant reduction in the fertilizing potential of the motile spermatozoa.

  6. Metallurgy, Visual Inspection, Hardness and Liquid Penetrant Testing, Aviation Quality Control 2: 9227.01.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The course consists of the basic and simpler methods of inspecting and nondestructive testing of parts and materials to insure the quality and reliability of the finished product. The outline consists of six blocks totaling 135 hours: (1) defects in the metal ingot, (2) defects resulting from processing metals, (3) defects in metals in service,…

  7. Android智能手机渗透测试研究%RESEARCH ON PENETRATION TEST FOR ANDROID-BASED SMARTPHONE

    Institute of Scientific and Technical Information of China (English)

    张靖; 彭新光

    2014-01-01

    Penetration testing technology is mostly confined to testing and evaluating traditional operating systems and networks, but does not address the security issues in mobile internet environment.And for that, in the paper we implement a penetration testing scheme for intelligent mobile terminals in mobile internet environment. The scheme constructs the test platform using practical mobile internet environment, and tests the performances variation of Android-based smartphone in terms of throughput, webpage response time, CPU utilisation and power consumption, etc., by simulating multiple networks attacks.Results show that the attacks targeted at link-layer including the denial-of-service attack, man-in-the-middle attack and session hijacking attack are all success in attacking the Android system and cause menace on the system.Besides, the flooding type of DoS attack is very detrimental to power consumption of the smartphone.This research outcome provides a basis for the detection and prevention of Android system security.%渗透测试技术大多局限于对传统操作系统及网络的测试评估,并未涉及移动互联网环境下安全问题。为此实现一种移动互联网环境下针对移动智能终端的渗透测试方案。该方案利用实际的移动互联网络环境搭建测试平台,通过模拟多种网络攻击对Android智能手机在吞吐量、网页响应时间、CPU使用率以及能耗等性能变化进行测试。结果表明,针对链路层的拒绝服务攻击,会话截取以及中间人攻击都能成功对Android系统实施攻击,对Android系统造成威胁。此外,泛洪类拒绝服务攻击对移动智能终端的电量的消耗非常明显。此研究成果为Android系统安全的检测和防御提供了依据。

  8. Penetration equations

    Energy Technology Data Exchange (ETDEWEB)

    Young, C.W. [Applied Research Associates, Inc., Albuquerque, NM (United States)

    1997-10-01

    In 1967, Sandia National Laboratories published empirical equations to predict penetration into natural earth materials and concrete. Since that time there have been several small changes to the basic equations, and several more additions to the overall technique for predicting penetration into soil, rock, concrete, ice, and frozen soil. The most recent update to the equations was published in 1988, and since that time there have been changes in the equations to better match the expanding data base, especially in concrete penetration. This is a standalone report documenting the latest version of the Young/Sandia penetration equations and related analytical techniques to predict penetration into natural earth materials and concrete. 11 refs., 6 tabs.

  9. Stability precision dynamic testing system on artillery

    Science.gov (United States)

    Wang, Chunyan; Li, Bo

    2014-12-01

    Dynamic feature of Weapon equipments is one of important performance index for evaluating the performance of the whole weapon system. The construction of target range in our country in fire control dynamic testing is relatively backward; therefore, it has greatly influenced the evaluation on the fire control system. In order to solve this problem, it's urgent to develop a new testing instrument so as to adjust to the armament research process and promote weapon system working more efficiently and thereby meeting the needs of modernization in national defense. This paper proposes a new measure which is used to test the stability precision of the fire control system, and it is installed on the moving base. Using the method, we develop a testing system which can test the stability precision of the fire control system and achieve a high precision results after testing. The innovation of the system is we can receive the image not only by CCD, but our eyes. It also adopts digital image-forming and image processing technique for real-time measurement and storing of the target information; it simultaneously adopts the method adjusting the platform and the corresponding fixture mounted on a sample to measure the stable precision and the precision of corner of stabilizator. In this paper, we make a description on the construction of the system and the idea of the designing of the optical system. Finally, we introduce the actual application of the system and testing results.

  10. The Impact of Antibacterial Agents on Dynamic Antifungal Effects of Fluconazole and Biofilm Penetration%抗菌药物对氟康唑动态抗真菌作用及透过生物膜的影响

    Institute of Scientific and Technical Information of China (English)

    杨久丽; 孙素梅; 刘书源; 孙淑娟

    2014-01-01

    Objective:To determine the combined dynamic antifungal effects of fluconazole and the tested antibacterial agents and evaluate the impact of the tested antibacterial agents on fluconazole penetration through biofilm. Methods:The dynamic killing curve was obtained based on the combined drugs against Candida albicans using viable bacterial counting method. The biofilm penetration test was evaluated by “sandwich” experimental method. Results:Synergistic effects on fluconazole were showed by using the tested antibacterial agents. The penetrating ability of fluconazole through biofilm by the drug resistant Candida albicans varied by different tested antibacterial drugs ,of which minocycline and rifampicin shown strongest impact on it but also on the synergistic effects of dynamic antifungal action. Levofloxacin ,azithromycin and others had a lower impact. Conclusion:The tested antibacterial agents can promote the fluconazole penetration of Candida albican ’ s biofilm and increase fluconazole’s dynamic antifungal effect.%目的:测定试验用抗菌药物与氟康唑联合的动态抗真菌作用,并评价试验用抗菌药物对氟康唑透过生物膜的影响。方法:采用活菌计数法描绘联合用药对白色念珠菌的动态杀菌曲线,以“三明治”透膜实验法评价试验用抗菌药物对氟康唑透过生物膜的影响。结果:试验抗菌药物对氟康唑有不同程度的增效作用,其中米诺环素和利福平对氟康唑透过耐药白色念珠菌生物膜的作用及其对氟康唑动态抗真菌的增效作用最强,氧氟沙星、阿奇霉素等次之。结论:试验用抗菌药物能促进氟康唑透过白色念珠菌生物膜,增强氟康唑的动态抗真菌作用。

  11. The Applied Research on Penetration Testing in the Office Website Development%渗透测试在办公网站开发的应用研究

    Institute of Scientific and Technical Information of China (English)

    张如云

    2016-01-01

    随着软件开发技术的快速发展,办公网站的结构日趋复杂,办公面临的安全威胁、威胁的主体及其动机和能力、威胁的客体等方面都变得更加复杂和难于控制。应对安全威胁的途径之一就是采用渗透测试的方法模拟黑客的攻击,本文介绍了渗透测试的定义和目的,介绍了渗透测试的类型,分析了渗透测试过程中的风险控制,阐述了渗透测试的一般步骤,强调了渗透测试的注意事项,最后,对渗透测试进行了总结。对软件开发者对办公网站进行渗透测试具有较强的指导意义。%With the rapid development of the software development technology,office site structure is complicated,the body of the office of the security threats and threats and their motivation and ability in such aspects as the object of threats and become more complicated and difficult to control. One way to deal with security threats is penetration testing methods are adopted to simulate the hacker's attack,the definition and purpose of this paper introduces the penetration testing, this paper introduces the types of penetration testing,penetration testing is analyzed in the process of risk control,this paper expounds the general steps of penetration testing,penetration testing is emphasized considerations,in the end,the penetration test are summarized. For software developers penetration test was carried out on the office website has strong guiding significance.

  12. Dynamic test on the Millau viaduct

    OpenAIRE

    Gautier, Y.; MORETTI, O; C. Cremona

    2005-01-01

    In November 2004, the Public Works Regional Laboratory of Lyon has operated dynamic tests on the Millau viaduct. The purpose of these was to identify the modal characteristics as reference values for future monitoring and to compare them to the theoretical values. It was in particular the opportunity to assess the real structural damping. Measurements were carried out in partnership with three companies or institutes : ADVITAM, SITES and CSTB. Excitation was performed by a tended cable fixed ...

  13. The Finite Deformation Dynamic Sphere Test Problem

    Energy Technology Data Exchange (ETDEWEB)

    Versino, Daniele [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brock, Jerry Steven [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-02

    In this manuscript we describe test cases for the dynamic sphere problem in presence of finite deformations. The spherical shell in exam is made of a homogeneous, isotropic or transverse isotropic material and elastic and elastic-plastic material behaviors are considered. Twenty cases, (a) to (t), are thus defined combining material types and boundary conditions. The inner surface radius, the outer surface radius and the material's density are kept constant for all the considered test cases and their values are ri = 10mm, ro = 20mm and p = 1000Kg/m3 respectively.

  14. Evaluation of liquefaction potential of soil based on standard penetration test using multi-gene genetic programming model

    Science.gov (United States)

    Muduli, Pradyut; Das, Sarat

    2014-06-01

    This paper discusses the evaluation of liquefaction potential of soil based on standard penetration test (SPT) dataset using evolutionary artificial intelligence technique, multi-gene genetic programming (MGGP). The liquefaction classification accuracy (94.19%) of the developed liquefaction index (LI) model is found to be better than that of available artificial neural network (ANN) model (88.37%) and at par with the available support vector machine (SVM) model (94.19%) on the basis of the testing data. Further, an empirical equation is presented using MGGP to approximate the unknown limit state function representing the cyclic resistance ratio (CRR) of soil based on developed LI model. Using an independent database of 227 cases, the overall rates of successful prediction of occurrence of liquefaction and non-liquefaction are found to be 87, 86, and 84% by the developed MGGP based model, available ANN and the statistical models, respectively, on the basis of calculated factor of safety (F s) against the liquefaction occurrence.

  15. Integration of ground-penetrating radar, ultrasonic tests and infrared thermography for the analysis of a precious medieval rose window

    Science.gov (United States)

    Nuzzo, L.; Calia, A.; Liberatore, D.; Masini, N.; Rizzo, E.

    2010-04-01

    The integration of high-resolution, non-invasive geophysical techniques (such as ground-penetrating radar or GPR) with emerging sensing techniques (acoustics, thermography) can complement limited destructive tests to provide a suitable methodology for a multi-scale assessment of the state of preservation, material and construction components of monuments. This paper presents the results of the application of GPR, infrared thermography (IRT) and ultrasonic tests to the 13th century rose window of Troia Cathedral (Apulia, Italy), affected by widespread decay and instability problems caused by the 1731 earthquake and reactivated by recent seismic activity. This integrated approach provided a wide amount of complementary information at different scales, ranging from the sub-centimetre size of the metallic joints between the various architectural elements, narrow fractures and thin mortar fillings, up to the sub-metre scale of the internal masonry structure of the circular ashlar curb linking the rose window to the façade, which was essential to understand the original building technique and to design an effective restoration strategy.

  16. Interpretation of test data with dynamic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Biba, P. [Southern California Edison, San Clemente, CA (United States). San Onofre Nuclear Generating Station

    1999-11-01

    The in-service testing of many Important-to-safety components, such as valves, pumps, etc. is often performed while the plant is either shut-down or the particular system is in a test mode. Thus the test conditions may be different from the actual operating conditions under which the components would be required to operate. In addition, the components must function under various postulated accident scenarios, which can not be duplicated during plant normal operation. This paper deals with the method of interpretation of the test data by a dynamic model, which allows the evaluation of the many factors affecting the system performance, in order to assure component and system operability.

  17. A Method for Selecting Software for Dynamic Event Analysis II: the Taylor Anvil and Dynamic Brazilian Tests

    Energy Technology Data Exchange (ETDEWEB)

    W. D. Richins; J. M. Lacy; T. K. Larson; S. R. Novascone

    2008-05-01

    New nuclear power reactor designs will require resistance to a variety of possible malevolent attacks as well as traditional dynamic accident scenarios. The design/analysis team may be faced with a broad range of phenomena including air and ground blasts, high-velocity penetrators or shaped charges, and vehicle or aircraft impacts. With a host of software tools available to address these high-energy events, the analysis team must evaluate and select the software most appropriate for their particular set of problems. The accuracy of the selected software should then be validated with respect to the phenomena governing the interaction of the threat and structure. Several software codes are available for the study of blast, impact, and other shock phenomena. At the Idaho National Laboratory (INL), a study is underway to investigate the comparative characteristics of a group of shock and high-strain rate physics codes including ABAQUS, LS-DYNA, CTH, ALEGRA, and ALE-3D. In part I of this report, a series of five benchmark problems to exercise some important capabilities of the subject software was identified. The benchmark problems selected are a Taylor cylinder test, a split Hopkinson pressure bar test, a free air blast, the dynamic splitting tension (Brazilian) test, and projectile penetration of a concrete slab. Part II-- this paper-- reports the results of two of the benchmark problems: the Taylor cylinder and the dynamic Brazilian test. The Taylor cylinder test is a method to determine the dynamic yield properties of materials. The test specimen is a right circular cylinder which is impacted against a theoretically rigid target. The cylinder deforms upon impact, with the final shape depending upon the dynamic yield stress, in turn a function of strain and strain rate. The splitting tension test, or Brazilian test, is a method to measure the tensile strength of concrete using a cylindrical specimen. The specimen is loaded diametrically in compression, producing a

  18. The cone penetration test and 2D imaging resistivity as tools to simulate the distribution of hydrocarbons in soil

    Science.gov (United States)

    Pérez-Corona, M.; García, J. A.; Taller, G.; Polgár, D.; Bustos, E.; Plank, Z.

    2016-02-01

    The purpose of geophysical electrical surveys is to determine the subsurface resistivity distribution by making measurements on the ground surface. From these measurements, the true resistivity of the subsurface can be estimated. The ground resistivity is related to various geological parameters, such as the mineral and fluid content, porosity and degree of water saturation in the rock. Electrical resistivity surveys have been used for many decades in hydrogeological, mining and geotechnical investigations. More recently, they have been used for environmental surveys. To obtain a more accurate subsurface model than is possible with a simple 1-D model, a more complex model must be used. In a 2-D model, the resistivity values are allowed to vary in one horizontal direction (usually referred to as the x direction) but are assumed to be constant in the other horizontal (the y) direction. A more realistic model would be a fully 3-D model where the resistivity values are allowed to change in all three directions. In this research, a simulation of the cone penetration test and 2D imaging resistivity are used as tools to simulate the distribution of hydrocarbons in soil.

  19. µCT-3D visualization analysis of resin composite polymerization and dye penetration test of composite adaptation.

    Science.gov (United States)

    Yoshikawa, Takako; Sadr, Alireza; Tagami, Junji

    2017-08-25

    This study evaluated the effects of the light curing methods and resin composite composition on composite polymerization contraction behavior and resin composite adaptation to the cavity wall using μCT-3D visualization analysis and dye penetration test. Cylindrical cavities were restored using Clearfil tri-S Bond ND Quick adhesive and filled with Clearfil AP-X or Clearfil Photo Bright composite. The composites were cured using the conventional or the slow-start curing method. The light-cured resin composite, which had increased contrast ratio during polymerization, improved adaptation to the cavity wall using the slow-start curing method. In the μCT-3D visualization method, the slow-start curing method reduced polymerization shrinkage volume of resin composite restoration to half of that produced by the conventional curing method in the cavity with adhesive for both composites. Moreover, μCT-3D visualization method can be used to detect and analyze resin composite polymerization contraction behavior and shrinkage volume as 3D image in the cavity.

  20. Preparation of dynamic gravity testing system

    Science.gov (United States)

    Bowin, Carl

    Bowin's interest at WHOI is to obtain the most accurate gravity and gravity gradient measurements possible. The Navy's interest is to have the most accurate navigation possible. Neither can have one without the other. Through Zarak Corporation, Bowin has proposed to the Navy Air System Command to develop a dynamic navigational gravity/gravity gradient (NAV/GRAV) system utilizing superconducting squid gravity and tensor gravity gradient sensors for high precision performance. The proposed system development incorporates that inter-dependency, not only to provide the best estimates of both, but also to provide estimates of the quality of the results obtained. Zarak is pursuing funds for the development of superconducting gravity and gravity gradient sensors. Such sensors, when available, will then be utilized in this palletized system for higher accuracy navigation, gravity and gravity gradient determination. It is desired that initial testing utilize Vibrating String Accelerometers (VSA) gravity sensors and readout systems available at WHOI. This way the development and testing of the NAV/GRAV system can proceed using the VSA sensors while the superconducting gravity sensors are being fabricated. Initial dynamic systems tests will be in a van vehicle for convenience and practicality. The system units will be palletized, and therefore they shall be easily transferable, and thus also be usable in aircraft and ships. It is planned that WHOI will have loan of prototype systems for about two months each year for earth research use.

  1. Standard test method for dynamic tear testing of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1983-01-01

    1.1 This test method covers the dynamic tear (DT) test using specimens that are 3/16 in. to 5/8 in. (5 mm to 16 mm) inclusive in thickness. 1.2 This test method is applicable to materials with a minimum thickness of 3/16 in. (5 mm). 1.3 The pressed-knife procedure described for sharpening the notch tip generally limits this test method to materials with a hardness level less than 36 HRC. Note 1—The designation 36 HRC is a Rockwell hardness number of 36 on Rockwell C scale as defined in Test Methods E 18. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Testing relativity with solar system dynamics

    Science.gov (United States)

    Hellings, R. W.

    1984-01-01

    A major breakthrough is described in the accuracy of Solar System dynamical tests of relativistic gravity. The breakthrough was achieved by factoring in ranging data from Viking Landers 1 and 2 from the surface of Mars. Other key data sources included optical transit circle observations, lunar laser ranging, planetary radar, and spacecraft (Mariner 9 to Mars and Mariner 10 to Mercury). The Solar System model which is used to fit the data and the process by which such fits are performed are explained and results are discussed. The results are fully consistent with the predictions of General Relativity.

  3. Testing relativity with solar system dynamics

    Science.gov (United States)

    Hellings, R. W.

    1984-01-01

    A major breakthrough is described in the accuracy of Solar System dynamical tests of relativistic gravity. The breakthrough was achieved by factoring in ranging data from Viking Landers 1 and 2 from the surface of Mars. Other key data sources included optical transit circle observations, lunar laser ranging, planetary radar, and spacecraft (Mariner 9 to Mars and Mariner 10 to Mercury). The Solar System model which is used to fit the data and the process by which such fits are performed are explained and results are discussed. The results are fully consistent with the predictions of General Relativity.

  4. Penetration analysis of projectile with inclined concrete target

    Science.gov (United States)

    Kim, S. B.; Kim, H. W.; Yoo, Y. H.

    2015-09-01

    This paper presents numerical analysis result of projectile penetration with concrete target. We applied dynamic material properties of 4340 steels, aluminium and explosive for projectile body. Dynamic material properties were measured with static tensile testing machine and Hopkinson pressure bar tests. Moreover, we used three concrete damage models included in LS-DYNA 3D, such as SOIL_CONCRETE, CSCM (cap model with smooth interaction) and CONCRETE_DAMAGE (K&C concrete) models. Strain rate effect for concrete material is important to predict the fracture deformation and shape of concrete, and penetration depth for projectiles. CONCRETE_DAMAGE model with strain rate effect also applied to penetration analysis. Analysis result with CSCM model shows good agreement with penetration experimental data. The projectile trace and fracture shapes of concrete target were compared with experimental data.

  5. Penetration analysis of projectile with inclined concrete target

    Directory of Open Access Journals (Sweden)

    Kim S.B.

    2015-01-01

    Full Text Available This paper presents numerical analysis result of projectile penetration with concrete target. We applied dynamic material properties of 4340 steels, aluminium and explosive for projectile body. Dynamic material properties were measured with static tensile testing machine and Hopkinson pressure bar tests. Moreover, we used three concrete damage models included in LS-DYNA 3D, such as SOIL_CONCRETE, CSCM (cap model with smooth interaction and CONCRETE_DAMAGE (K&C concrete models. Strain rate effect for concrete material is important to predict the fracture deformation and shape of concrete, and penetration depth for projectiles. CONCRETE_DAMAGE model with strain rate effect also applied to penetration analysis. Analysis result with CSCM model shows good agreement with penetration experimental data. The projectile trace and fracture shapes of concrete target were compared with experimental data.

  6. Resistência do solo à penetração, após o tráfego com dois tipos de pneus utilizando-se um equipamento para ensaio dinâmico Soil penetration resistance after the traffic with two types of tyres using the dynamic test equipment

    Directory of Open Access Journals (Sweden)

    Alberto K. Nagaoka

    2003-08-01

    Full Text Available Com este trabalho objetivou-se, principalmente, avaliar a resistência do solo à penetração, em função do tipo de pneu (diagonal e radial e da carga vertical, utilizando-se um equipamento de ensaio de pneu agrícola individual, e verificar os efeitos nas camadas do solo pela passagem do pneu. O equipamento utilizado foi projetado para ser acoplado na traseira do trator e acionado pela tomada de potência afim de realizar ensaios de pneus em condições de campo, sendo ainda, constituído, de uma caixa de transmissão mecânica de trator e instrumentos eletrônicos de medição. Este trabalho foi desenvolvido no Núcleo de Engenharia Rural da Faculdade de Ciências Agronômicas (FCA/UNESP em Botucatu. Os dados obtidos no experimento foram analisados considerando-se o delineamento experimental em blocos, no esquema de parcelas subdivididas, tendo na parcela os pneus (radial e diagonal e na subparcelas as cargas (10.000, 13.000, 16.000 e 19.000 N com cinco repetições. O pneu radial mostrou vantagem em relação ao diagonal, por apresentar menores valores de índice de cone. As cargas mais elevadas provocaram maiores valores de índice de cone e seus incrementos, nas camadas de 0 a 10 e de 10 a 20 cm.The main objective of this research was to evaluate the soil cone index results as a function of tyre type (radial and bias tyres and tyre load using a single wheel testing equipment and verifying the effect on the layers after tyre traffic. This equipment was projected for linking at the rear of a tractor and was activated by the power with the purpose of testing individual tyre under field conditions and constituted of a mechanical transmission box and electronic instruments of measurement. This study was conducted at the Agricultural Tyre Testing Center - NEMPA of Rural Engineering Department, Faculty of Agronomic Sciences, UNESP, Botucatu, SP. The data obtained were analyzed considering a random block experimental design in split plot with

  7. 模型驱动的Web应用SQL注入渗透测试%Model-driven penetration test of the SQL injection in Web applications

    Institute of Scientific and Technical Information of China (English)

    田伟; 许静; 杨巨峰; 张莹; 刘磊

    2012-01-01

    To resolve the problem of how to generate adequate test cases to reduce the false negative in penetration testing for the SQL ( structured query language) injection vulnerability, this paper proposes a novel model-driven penetration test case generation method.This method divides the penetration test case generation for the SQL injection vulnerability into two steps: 1) Building the model of penetration test case, which reveals the regularity of current SQL injection attacks to expound what test case should be used and describes them in a formal way; and 2 ) Instantiating the penetration test case model according to a series of coverage criteria proposed in the study to generate the test case covering more attack patterns.The experiment shows that compared with randomly enumerated test cases used in the current related work, the test cases generated by the proposed method can more effectively find the SQL injection vulnerability hidden behind the inadequate defense mechanism, which reduces the false negative and improves the test accuracy.%针对结构化查询语言(SQL)注入渗透测试用例不充分造成测试漏报的问题,对基于形式化建模生成渗透测试用例问题进行了研究,提出了以下方法:将SQL注入漏洞渗透测试用例生成分为两步:第1步建立渗透测试用例的形式化模型,以用例模型更全面、有规律地描述当前各种SQL注入攻击的方法模式,指导生成更多种类的用例输入;第2步提出若干新的SQL注入漏洞渗透测试用例覆盖度准则,将用例模型实例化、生成覆盖更多样式的用例输入.实验表明,用上述方法生成的用例,优于当前其它研究中使用的随机枚举用例,可更有效地测出隐藏于Web应用不足防御措施之后的SQL注入漏洞,从而降低渗透测试结果的漏报.

  8. Dynamic leaching test of personal computer components.

    Science.gov (United States)

    Li, Yadong; Richardson, Jay B; Niu, Xiaojun; Jackson, Ollie J; Laster, Jeremy D; Walker, Aaron K

    2009-11-15

    A dynamic leaching test (DLT) was developed and used to evaluate the leaching of toxic substances for electronic waste in the environment. The major components in personal computers (PCs) including motherboards, hard disc drives, floppy disc drives, and compact disc drives were tested. The tests lasted for 2 years for motherboards and 1.5 year for the disc drives. The extraction fluids for the standard toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) were used as the DLT leaching solutions. A total of 18 elements including Ag, Al, As, Au, Ba, Be, Cd, Cr, Cu, Fe, Ga, Ni, Pd, Pb, Sb, Se, Sn, and Zn were analyzed in the DLT leachates. Only Al, Cu, Fe, Ni, Pb, and Zn were commonly found in the DLT leachates of the PC components. Their leaching levels were much higher in TCLP extraction fluid than in SPLP extraction fluid. The toxic heavy metal Pb was found to continuously leach out of the components over the entire test periods. The cumulative amounts of Pb leached out of the motherboards in TCLP extraction fluid reached 2.0 g per motherboard over the 2-year test period, and that in SPLP extraction fluid were 75-90% less. The leaching rates or levels of Pb were largely affected by the content of galvanized steel in the PC components. The higher was the steel content, the lower the Pb leaching rate would be. The findings suggest that the obsolete PCs disposed of in landfills or discarded in the environment continuously release Pb for years when subjected to landfill leachate or rains.

  9. Dynamic model of Fast Breeder Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Vaidyanathan, G., E-mail: vaidya@igcar.gov.i [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India); Kasinathan, N.; Velusamy, K. [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India)

    2010-04-15

    Fast Breeder Test Reactor (FBTR) is a 40 M Wt/13.2 MWe sodium cooled reactor operating since 1985. It is a loop type reactor. As part of the safety analysis the response of the plant to various transients is needed. In this connection a computer code named DYNAM was developed to model the reactor core, the intermediate heat exchanger, steam generator, piping, etc. This paper deals with the mathematical model of the various components of FBTR, the numerical techniques to solve the model, and comparison of the predictions of the code with plant measurements. Also presented is the benign response of the plant to a station blackout condition, which brings out the role of the various reactivity feedback mechanisms combined with a gradual coast down of reactor sodium flow.

  10. Direct Laser Ice Penetrator for Exploring Icy Ocean Worlds: Design, Modeling and Test Results of a Proof-of-Concept Prototype

    Science.gov (United States)

    Hogan, B.; Stone, W.; Bramall, N. E.; Siegel, V.; Lelievre, S.; Rothhammer, B.; Richmond, K.; Flesher, C.

    2016-12-01

    Subsurface exploration of icy ocean worlds requires an efficient method of penetrating ice to significant depths under extreme environment conditions. Searching for extant life dictates descent to a depth which is habitable or where biomarkers can survive and allow detection. It's anticipated that several meters to 10s of meters of shielding is required to prevent cosmic background radiation and other energetic particles from destroying biomarker evidence. We have devised, developed and demonstrated an entirely novel ice penetrating technology utilizing laser light carried by an optical fiber tether and emitted from a probe's optical nose cone and radiated directly into the volume of ice preceding the penetrator. We have termed it a "Direct Laser Penetrator" or DLP. We present design details, modeling, and test data from preliminary proof-of-concept experiments conducted at Stone Aerospace with results exceeding expectations and achieving the fastest reported thermal probe descent rate to date (> 12 m / hr). DLP has critical benefits over conventional "hot point" melt probes, which must generate large temperature gradients to force heat by conduction through the nose cone, and layers of ice and water. Additionally, hot point melt probes tested under vacuum have shown extreme difficulty initiating penetration, as virtually no thermal contact exists between the probe nose and rough ice surface. The ice simply sublimates and any transferred heat is quickly dissipated due to the low power density and extreme cold. DLP requires NO thermal contact between the probe nose and the ice surface since the laser energy is radiated directly into the volume (vs. surface) of ice preceding the penetrator. A proposed key element of the DLP is the fiber optic tether, coupled with a dedicated sensor fiber, enables "optical access" to the subsurface environment by a lander's shared or DLP dedicated on-board instruments (Raman / Fluorescence / fiber / UV / VIS / NIR spectroscopy, etc

  11. Conception of a course for professional training and education in the field of computer and mobile forensics, part III: network forensics and penetration testing

    Science.gov (United States)

    Kröger, Knut; Creutzburg, Reiner

    2014-02-01

    IT security and computer forensics are important components in the information technology. From year to year, incidents and crimes increase that target IT systems or were done with their help. More and more companies and authorities have security problems in their own IT infrastructure. To respond to these incidents professionally, it is important to have well trained staff. The fact that many agencies and companies work with very sensitive data make it necessary to further train the own employees in the field of network forensics and penetration testing. Motivated by these facts, this paper - a continuation of a paper of January 2012 [1], which showed the conception of a course for professional training and education in the field of computer and mobile forensics - addresses the practical implementation important relationships of network forensic and penetration testing.

  12. Penetration Tester's Open Source Toolkit

    CERN Document Server

    Faircloth, Jeremy

    2011-01-01

    Great commercial penetration testing tools can be very expensive and sometimes hard to use or of questionable accuracy. This book helps solve both of these problems. The open source, no-cost penetration testing tools presented do a great job and can be modified by the user for each situation. Many tools, even ones that cost thousands of dollars, do not come with any type of instruction on how and in which situations the penetration tester can best use them. Penetration Tester's Open Source Toolkit, Third Edition, expands upon existing instructions so that a professional can get the most accura

  13. Slip with friction and penetration with resistance boundary conditions for the Navier-Stokes equations - numerical tests and aspects of the implementation

    Energy Technology Data Exchange (ETDEWEB)

    John, V. [Magdeburg Univ. (Germany). Inst. fuer Analysis und Numerik

    2001-07-01

    We consider slip with friction and penetration with resistance boundary conditions in the steady state Navier-Stokes equations. This paper describes some aspects of the implementation of these boundary conditions for finite element discretizations. Numerical tests on two and three dimensional channel flows across a step using the slip with friction boundary condition study the influence of the friction parameter on the position of the reattachment point and the reattachment line, respectively, of the recirculating vortex. (orig.)

  14. Cone Penetration Test and Soil Boring at the Bayside Groundwater Project Site in San Lorenzo, Alameda County, California

    Science.gov (United States)

    Bennett, Michael J.; Sneed, Michelle; Noce, Thomas E.; Tinsley, John C.

    2009-01-01

    were drilled at the BGP for the purpose of monitoring pore-fluid pressure changes and aquifer-system deformation. One 308-m deep borehole contains six piezometers, the other two boreholes are 182 and 299 m deep and contain a dual-stage extensometer. To investigate the physical properties of the sediments, two phases of subsurface exploration were conducted. In the first phase, a USGS drilling crew obtained numerous core samples, 5.8 cm in diameter by 1.5 m long. The samples were extracted between July 28, 2006, and August 5, 2006; nine samples were tested for this study at the USGS soils laboratory in Menlo Park, California. Phase two began on June 22, 2006, when a seismic cone penetration test (SCPT) sounding was made to a depth of 32.3 m. Additional field work was completed May 8, 2007, with a hollow-stem auger boring that took continuous 9.8-cm-diameter samples from the depth interval of 6.1 to 10.7 m to supplement poor recovery from the first phase of sampling. These samples were also tested in the soils laboratory at the USGS.

  15. Testing substellar models with dynamical mass measurements

    Directory of Open Access Journals (Sweden)

    Liu M.C.

    2011-07-01

    Full Text Available We have been using Keck laser guide star adaptive optics to monitor the orbits of ultracool binaries, providing dynamical masses at lower luminosities and temperatures than previously available and enabling strong tests of theoretical models. We have identified three specific problems with theory: (1 We find that model color–magnitude diagrams cannot be reliably used to infer masses as they do not accurately reproduce the colors of ultracool dwarfs of known mass. (2 Effective temperatures inferred from evolutionary model radii are typically inconsistent with temperatures derived from fitting atmospheric models to observed spectra by 100–300 K. (3 For the only known pair of field brown dwarfs with a precise mass (3% and age determination (≈25%, the measured luminosities are ~2–3× higher than predicted by model cooling rates (i.e., masses inferred from Lbol and age are 20–30% larger than measured. To make progress in understanding the observed discrepancies, more mass measurements spanning a wide range of luminosity, temperature, and age are needed, along with more accurate age determinations (e.g., via asteroseismology for primary stars with brown dwarf binary companions. Also, resolved optical and infrared spectroscopy are needed to measure lithium depletion and to characterize the atmospheres of binary components in order to better assess model deficiencies.

  16. The Dynamic test of Novel Punch Driven by Linear Motor

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The key character of punch is its impulsion. For the novel punch driven by linear motor, the computer-aided test system is used. Its frequency performance is calculated by the identification method according to the dynamic demarcation. This dynamic test system presented here can be applied in the sample machines under development and performance test of finished products.

  17. Correlation Between Cone Penetration Rate And Measured Cone Penetration Parameters In Silty Soils

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2013-01-01

    penetration tests with varying penetration rates conducted at a test site where the subsoil primary consists of sandy silt. It is shown how a reduced penetration rate influences the cone penetration measurements e.g. the cone resistance, pore pressure, and sleeve friction.......This paper shows, how a change in cone penetration rate affects the cone penetration measurements, hence the cone resistance, pore pressure, and sleeve friction in silty soil. The standard rate of penetration is 20 mm/s, and it is generally accepted that undrained penetration occurs in clay while...... drained penetration occurs in sand. When lowering the penetration rate, the soil pore water starts to dissipate and a change in the drainage condition is seen. In intermediate soils such as silty soils, the standard cone penetration rate may result in a drainage condition that could be undrained...

  18. Aerothermodynamic Testing of Protuberances and Penetrations on the NASA Crew Exploration Vehicle Heat Shield in the NASA Langley 20-Inch Mach 6 Air Tunnel

    Science.gov (United States)

    Liechty, Derek S.

    2008-01-01

    An experimental wind tunnel program is being conducted in support of an Agency wide effort to develop a replacement for the Space Shuttle and to support the NASA s long-term objective of returning to the moon and then on to Mars. This paper documents experimental measurements made on several scaled ceramic heat transfer models of the proposed Crew Exploration Vehicle. Global heat transfer images and heat transfer distributions obtained using phosphor thermography were used to infer interference heating on the Crew Exploration Vehicle Cycle 1 heat shield from local protuberances and penetrations for both laminar and turbulent heating conditions. Test parametrics included free stream Reynolds numbers of 1.0x10(exp 6)/ft to 7.25x10(exp 6)/ft in Mach 6 air at a fixed angle-of-attack. Single arrays of discrete boundary layer trips were used to trip the boundary layer approaching the protuberances/penetrations to a turbulent state. Also, the effects of three compression pad diameters, two radial locations of compression pad/tension tie location, compression pad geometry, and rotational position of compression pad/tension tie were examined. The experimental data highlighted in this paper are to be used to validate CFD tools that will be used to generate the flight aerothermodynamic database. Heat transfer measurements will also assist in the determination of the most appropriate engineering methods that will be used to assess local flight environments associated with protuberances/penetrations of the CEV thermal protection system.

  19. 侵彻多层钢靶板过载测试技术%Overload Testing Technology of Penetrating Multi-Layer Steel Target Plate

    Institute of Scientific and Technical Information of China (English)

    张美云; 王敬斌; 王丹; 石庚辰

    2016-01-01

    针对在弹丸侵彻钢靶板过程中高过载带来的问题,研究了一种能够抗高冲击作用的弹丸侵彻多层钢靶板过载测试装置。该装置采用灌封、多层材料组合缓冲以及二次电源的措施,能保证测试装置抗高冲击作用和可靠工作。对弹丸侵彻多层钢靶板的过载特性进行了测试,结果表明所研究的测试装置能够可靠获取与记录弹丸穿过各层靶板时的加速度。%This paper presented a testing device with the ability of resisting high shock while penetrating multi-layer steel target plate to guarantee the high overload problem with plate process in the projectile penetrating steel target. Combined with potting technology, multi-layer shock absorb materials and secondary electrical power source,the device shows resistance to high shock and the ability of reliable working.Experiments on overload characteristic further proved that the device can collect and store the acceleration of penetrating multi-layer target plate with high reliability.

  20. Preparation of Power Distribution System for High Penetration of Renewable Energy Part I. Dynamic Voltage Restorer for Voltage Regulation Pat II. Distribution Circuit Modeling and Validation

    Science.gov (United States)

    Khoshkbar Sadigh, Arash

    Part I: Dynamic Voltage Restorer In the present power grids, voltage sags are recognized as a serious threat and a frequently occurring power-quality problem and have costly consequence such as sensitive loads tripping and production loss. Consequently, the demand for high power quality and voltage stability becomes a pressing issue. Dynamic voltage restorer (DVR), as a custom power device, is more effective and direct solutions for "restoring" the quality of voltage at its load-side terminals when the quality of voltage at its source-side terminals is disturbed. In the first part of this thesis, a DVR configuration with no need of bulky dc link capacitor or energy storage is proposed. This fact causes to reduce the size of the DVR and increase the reliability of the circuit. In addition, the proposed DVR topology is based on high-frequency isolation transformer resulting in the size reduction of transformer. The proposed DVR circuit, which is suitable for both low- and medium-voltage applications, is based on dc-ac converters connected in series to split the main dc link between the inputs of dc-ac converters. This feature makes it possible to use modular dc-ac converters and utilize low-voltage components in these converters whenever it is required to use DVR in medium-voltage application. The proposed configuration is tested under different conditions of load power factor and grid voltage harmonic. It has been shown that proposed DVR can compensate the voltage sag effectively and protect the sensitive loads. Following the proposition of the DVR topology, a fundamental voltage amplitude detection method which is applicable in both single/three-phase systems for DVR applications is proposed. The advantages of proposed method include application in distorted power grid with no need of any low-pass filter, precise and reliable detection, simple computation and implementation without using a phased locked loop and lookup table. The proposed method has been verified

  1. Paclitaxel-loaded lipid nanoparticles for topical application: the influence of oil content on lipid dynamic behavior, stability, and drug skin penetration

    Science.gov (United States)

    Tosta, Fabiana Vaz; Andrade, Lígia Marquez; Mendes, Lívia Palmerston; Anjos, Jorge Luiz V.; Alonso, Antonio; Marreto, Ricardo Neves; Lima, Eliana Martins; Taveira, Stephânia Fleury

    2014-12-01

    Paclitaxel (PAC) has shown potential for regulating hyperkeratosis in skin diseases and its encapsulation in lipid nanoparticles could improve topical treatments. So, solid lipid nanoparticles (SLN) and nanostructured lipid carriers with 12.5 % (NLC1) and 25 % (NLC2) oil content were obtained and characterized. Lipid dynamic behavior was investigated through electron paramagnetic resonance spectroscopy (EPR) and comparative evaluations of EPR, and stability and skin permeation studies were performed. High entrapment efficiency was obtained for all formulations (over 90 %). The absence (SLN) or addition of 12.5 % oil (NLC1) did not significantly alter nanoparticle mean diameter, but 25 % oil (NLC2) produced smaller particles (270.6 ± 13.5 nm). EPR studies showed that 12.5 % oil increased NLC1 fluidity at the surface. Surprisingly, more oil increased NLC2 superficial rigidity, due to the decrease in nanoparticle mean diameter and additional PAC accumulation in the superficial environment. The oil in lipid matrices improved the physicochemical stability of NLC formulations, and drug-oil chemical affinity prevented PAC expulsion during storage time. NLC2 improved PAC skin penetration and was the only formulation capable of enhancing PAC penetration to deeper skin layers (about 6.48 ± 1.39 µg/cm2). PAC-NLC2 seemed to be very promising nanocarriers for the topical delivery of PAC.

  2. Paclitaxel-loaded lipid nanoparticles for topical application: the influence of oil content on lipid dynamic behavior, stability, and drug skin penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tosta, Fabiana Vaz; Andrade, Lígia Marquez; Mendes, Lívia Palmerston [Universidade Federal de Goiás (UFG), Pharmaceutical Technology Laboratory, School of Pharmacy (Brazil); Anjos, Jorge Luiz V. [Universidade Federal de Goiás (UFG), Physics Department (Brazil); Alonso, Antonio [Universidade Federal de Goiás (UFG), Biophysics Laboratory, Physics Institute (Brazil); Marreto, Ricardo Neves; Lima, Eliana Martins; Taveira, Stephânia Fleury, E-mail: stephaniafleury@ufg.br [Universidade Federal de Goiás (UFG), Pharmaceutical Technology Laboratory, School of Pharmacy (Brazil)

    2014-12-15

    Paclitaxel (PAC) has shown potential for regulating hyperkeratosis in skin diseases and its encapsulation in lipid nanoparticles could improve topical treatments. So, solid lipid nanoparticles (SLN) and nanostructured lipid carriers with 12.5 % (NLC1) and 25 % (NLC2) oil content were obtained and characterized. Lipid dynamic behavior was investigated through electron paramagnetic resonance spectroscopy (EPR) and comparative evaluations of EPR, and stability and skin permeation studies were performed. High entrapment efficiency was obtained for all formulations (over 90 %). The absence (SLN) or addition of 12.5 % oil (NLC1) did not significantly alter nanoparticle mean diameter, but 25 % oil (NLC2) produced smaller particles (270.6 ± 13.5 nm). EPR studies showed that 12.5 % oil increased NLC1 fluidity at the surface. Surprisingly, more oil increased NLC2 superficial rigidity, due to the decrease in nanoparticle mean diameter and additional PAC accumulation in the superficial environment. The oil in lipid matrices improved the physicochemical stability of NLC formulations, and drug-oil chemical affinity prevented PAC expulsion during storage time. NLC2 improved PAC skin penetration and was the only formulation capable of enhancing PAC penetration to deeper skin layers (about 6.48 ± 1.39 µg/cm{sup 2}). PAC-NLC2 seemed to be very promising nanocarriers for the topical delivery of PAC.

  3. Testing dynamic stabilisation in complex Langevin simulations

    CERN Document Server

    Attanasio, Felipe

    2016-01-01

    Complex Langevin methods have been successfully applied in theories that suffer from a sign problem such as QCD with a chemical potential. We present and illustrate a novel method (dynamic stabilisation) that ensures that Complex Langevin simulations stay close to the SU(3) manifold, which lead to correct and improved results in the framework of pure Yang-Mills simulations and QCD in the limit of heavy quarks.

  4. An Earth Penetrating Modeling Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stokes, E; Yarrington, P; Glenn, L

    2005-06-21

    Documentation of a study to assess the capability of computer codes to predict lateral loads on earth penetrating projectiles under conditions of non-normal impact. Calculations simulated a set of small scale penetration tests into concrete targets with oblique faces at angles of 15 and 30 degrees to the line-of-flight. Predictive codes used by the various calculational teams cover a wide range of modeling approaches from approximate techniques, such as cavity expansion, to numerical methods, such as finite element codes. The modeling assessment was performed under the auspices of the Phenomenology Integrated Product Team (PIPT) for the Robust Nuclear Earth Penetrator Program (RNEP). Funding for the penetration experiments and modeling was provided by multiple earth penetrator programs.

  5. Dynamic Tensile Test Results for Several Metals

    Science.gov (United States)

    1982-04-01

    8217• AFWAL-TR-82-4026 SDYNAMIC TENSILE TEST RESULTS FOR SEVERAL METALS SUNIVERSITY OF DAYTON RESEA CH INSTITUTE ’ 300 COLLEGE PARK DR. DAYTON, OHIO... Tensile Test Results for March - September 1981 Several Metals 6. PERFORMING oDG. REPORT NUMBER UDR-TR-82-05 7. AUTHOR(s) S. CONTRACT OfR GRANT NUMBER(&) S...tensile stresses above 10 s The split Hopkinson bar tensile test (see next section) can extend this range another decade. Resolution of rapidly

  6. Optimization of Deep Drilling Performance--Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Alan Black; Arnis Judzis

    2003-10-01

    This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2002 through September 2002. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit--fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. Accomplishments to date include the following: 4Q 2002--Project started; Industry Team was assembled; Kick-off meeting was held at DOE Morgantown; 1Q 2003--Engineering meeting was held at Hughes Christensen, The Woodlands Texas to prepare preliminary plans for development and testing and review equipment needs; Operators started sending information regarding their needs for deep drilling challenges and priorities for large-scale testing experimental matrix; Aramco joined the Industry Team as DEA 148 objectives paralleled the DOE project; 2Q 2003--Engineering and planning for high pressure drilling at TerraTek commenced; 3Q 2003--Continuation of engineering and design work for high pressure drilling at TerraTek; Baker Hughes INTEQ drilling Fluids and Hughes Christensen commence planning for Phase 1 testing--recommendations for bits and fluids.

  7. Penetrant Testing Technology on Castings of Aerofoil Slide Sleeves%机翼滑轨套筒铸件渗透检测技术研究

    Institute of Scientific and Technical Information of China (English)

    赵梦; 王树志; 任学冬

    2014-01-01

    针对套筒铸件内腔在渗透检测中存在局部目视不可达的问题,使用工业内窥镜对套筒铸件内腔渗透检测结果进行辅助检测,在探测距离为20~30 mm时,可以辅助观察到目视不可达部位。与目视观察对比,灵敏度虽较目视观察有所降低,但结果能够满足检测要求。此外,通过对套筒铸件渗透检测前进行吹砂和酸洗等表面处理工艺的对比试验,验证了表面处理工艺对渗透检测的影响,吹砂和酸洗工艺均能改善渗透检测的背景,酸洗工艺能使缺陷开口充分暴露于表面,因此钛合金铸件在渗透检测之前应进行先吹砂后酸洗的处理工艺并及时除氢。%With an appropriate observation distance of 20~30 mm, industrial video endoscopesare used to observe the dead zones which can’ t be detected with penetrant testing. Compared with visual observation, the sensitivity reduces but the results can meet the testing requirements. In addition, the effects of surface treatment are also investigated by a serious of contrast experiments before and after the penetrant testing. The blasting and pickling surface treatments can improve testing background and the defects opening can fully be exposed to the surface by pickling. The titanium castings shall be treated by blasting and pickling before the penetrant testing, and the dehydrogenation is also needed timely.

  8. Recent developments in dynamic testing of materials

    Directory of Open Access Journals (Sweden)

    Seidt J.D.

    2012-08-01

    Full Text Available Three new testing configurations that have been developed since the last DYMAT conference in 2009 are presented. The first is high strain rate testing of Kevlar cloth and Kevlar yarn in a tensile Split Hopkinson Bar (SHB apparatus. The Kevlar cloth/yarn is attached to the bars by specially designed adaptors that keep the impedance constant. In addition to determining the specimen’s stress and strain from the recorded waves in the bars the deformations are also measured with Digital Image Correlation (DIC. The second testing configuration is a high strain rate shear test for sheet metal. The experiment is done by using a flat notched specimen in a tensile SHB apparatus. The shear strain is measured using DIC within the notch and on the boundary. The third development is a compression apparatus for testing at intermediate strain rates ranging from 20 s−1 to 200 s−1. The apparatus is a combination of a hydraulic actuator and a compression SHB. The stress in the specimen is determined from the stress wave in a very long transmitter bar and the strain and strain rate is determined by using DIC. The results show clean stress strain curves (no ringing.

  9. Wind dynamics testing on DAHAN heliostat

    Energy Technology Data Exchange (ETDEWEB)

    Wang Zhifeng; Wu Zhiyong [Inst. of Electrical Engineering, Chinese Academy of Sciences, BJ (China); Liu Xiaobin [Himin Solar Energy Group, Dezhou, SD (China); Li Zhengnong [Coll. of Civil Engineering, Hunan Univ., Changsha, HN (China)

    2008-07-01

    The aperture area of DAHAN heliostat is 100m{sup 2}, and the center of drive mechanism is 7m above the ground. The purpose of this study is to provide wind load reference for the structural design of heliostat by means of wind tunnel test. The test mainly consisted of the measurement of time-history wind pressure on heliostat model under various operating conditions of vertical and horizontal wind direction, and the measurement of forces and moments of heliostat with wind tunnel balance. On the basis of data processing and calculation, mean wind pressure coefficient, root-mean-square wind pressure coefficient and the maximum wind pressure of each test point and blockage were obtained in the wind speed of 14m/s, which are used to calculate the possible maximum displacement and strain of the heliostat structure. (orig.)

  10. Testing Lorentz symmetry with planetary orbital dynamics

    CERN Document Server

    Hees, Aurélien; Poncin-Lafitte, Christophe Le; Bourgoin, Adrien; Rivoldini, Attilio; Lamine, Brahim; Meynadier, Frédéric; Guerlin, Christine; Wolf, Peter

    2015-01-01

    Planetary ephemerides are a very powerful tool to constrain deviations from the theory of General Relativity using orbital dynamics. The effective field theory framework called the Standard-Model Extension (SME) has been developed in order to systematically parametrize hypothetical violations of Lorentz symmetry (in the Standard Model and in the gravitational sector). In this communication, we use the latest determinations of the supplementary advances of the perihelia and of the nodes obtained by planetary ephemerides analysis to constrain SME coefficients from the pure gravity sector and also from gravity-matter couplings. Our results do not show any deviation from GR and they improve current constraints. Moreover, combinations with existing constraints from Lunar Laser Ranging and from atom interferometry gravimetry allow us to disentangle contributions from the pure gravity sector from the gravity-matter couplings.

  11. Making System Dynamics Cool IV: Teaching & Testing with Cases & Quizzes

    NARCIS (Netherlands)

    Pruyt, E.

    2012-01-01

    This follow-up paper presents cases and multiple choice questions for teaching and testing System Dynamics modeling. These cases and multiple choice questions were developed and used between January 2012 and April 2012 a large System Dynamics course (250+ 2nd year BSc and 40+ MSc students per year)

  12. Puzzling with potential : dynamic testing of analogical reasoning in children

    NARCIS (Netherlands)

    Stevenson, Claire Elisabeth

    2012-01-01

    Assessment procedures are frequent in children's school careers; however, measuring potential for learning has remained a puzzle. Dynamic testing is a method to assess cognitive potential that includes training in the assessment process. The goal of this thesis project was to develop a new dynamic

  13. Making System Dynamics Cool III: New Hot Teaching & Testing Cases

    NARCIS (Netherlands)

    Pruyt, E.

    2011-01-01

    This follow-up paper presents seven actual cases for testing and teaching System Dynamics developed and used between January 2010 and January 2011 for one of the largest System Dynamics courses (250+ students per year) at Delft University of Technology in the Netherlands. The cases presented in this

  14. Making System Dynamics Cool IV: Teaching & Testing with Cases & Quizzes

    NARCIS (Netherlands)

    Pruyt, E.

    2012-01-01

    This follow-up paper presents cases and multiple choice questions for teaching and testing System Dynamics modeling. These cases and multiple choice questions were developed and used between January 2012 and April 2012 a large System Dynamics course (250+ 2nd year BSc and 40+ MSc students per year)

  15. Testing for vector autoregressive dynamics under heteroskedasticity

    NARCIS (Netherlands)

    C.M. Hafner (Christian); H. Herwartz

    2002-01-01

    textabstractIn this paper we introduce a bootstrap procedure to test parameter restrictions in vector autoregressive models which is robust in cases of conditionally heteroskedastic error terms. The adopted wild bootstrap method does not require any parametric specification of the volatility process

  16. Application of 2D electrical resistivity imaging and cone penetration test (CPT) to assess the harzadous effect of near surface water on foundations in Lagos Nigeria

    Science.gov (United States)

    Adewoyin, O. O.; Joshua, E. O.; Akinyemi, M. L.; Omeje, M.; Joel, E. S.

    2017-05-01

    Adequate information on the condition of the subsurface is very important for site evaluation for engineering purposes. In this study two dimensional (2D) geoelectrical resistivity survey and cone penetration tests were conducted to study the hazardous effect of excess near surface water on the foundation of building in a reclaimed land located at Victoria Island area of Lagos State. The results of the inverted 2D geoelectrical resistivity data revealed three distinct geoelectrical layers characterized by low to moderate electrical resistivity of 2.23 and 129Ωm and 9.46 to 636Ωm respectively. The topsoil is characterized by wet sandy soil, which is underlain by sandy clay and banded at the below by a geologic formation of low resistivity which is suspected to be clay. The clay material may be responsible for the excess water retention observed in the area. The CPT method on the other hand revealed a geological formation of low resistance to penetration between 2-3 kg/cm2 from the topsoil to a depth of 7 m, which may be the effect of excess water in the near surface. This study revealed that the foundation of building may not be founded directly on the soil in any reclaimed land as this may result in collapse as a result of upward migration of water to the near surface.

  17. The impalement of water drops impinging onto hydrophobic/superhydrophobic graphite surfaces: the role of dynamic pressure, hammer pressure and liquid penetration time

    Science.gov (United States)

    Pittoni, Paola G.; Lin, Ya-Chi; Lin, Shi-Yow

    2014-05-01

    Droplet impingement experiments at low Weber numbers were conducted by digitizing silhouettes of impacting water drops onto unlike graphite substrates, typified by different advancing water contact angles (θa): 140 and 160°. The relaxation of wetting diameter, dynamic contact angle, and drop shapes were measured. The purpose was to carefully investigate the phenomenology and possible causes of the failure of the superhydrophobicity. During impact and spreading phases, all the drops impinging onto both graphite substrates showed a similar behavior. Then, after an initial free recoil, drops impinging at lower impact velocities onto graphite substrates characterized by θa = 140° clearly exhibited time intervals in which the wetting diameter appeared to be almost constant. The duration of this pinned phase was observed decreasing with increasing the impact height and almost completely disappearing for drops impinging at higher impact velocities. This behavior has never been reported before, and, contrariwise, water droplets impinging at lower impact velocities onto hydrophobic and superhydrophobic surfaces have been generally observed more freely retracting, and ultimately rebounding, compared to drops impacting at higher velocities. In the present study, this latter behavior was recorded just for drops impinging onto graphite surfaces characterized by θa = 160°. A theoretical description of the experimental results was proposed, specifically investigating the role of dynamic pressure, hammer pressure and liquid penetration time during the impact, spreading and recoil stages.

  18. Prediction of alumina penetration

    Energy Technology Data Exchange (ETDEWEB)

    Mandell, D A

    1993-02-01

    The MESA hydrocode was used to predict two-dimensional tests of L/D 10 and L/D 15 tungsten rods impacting AD 90 alumina with a steel backing. The residual penetration into the steel is the measured quantity in these experiments conducted at the Southwest Research Institute (SWR). The interface velocity as a function of time between an alumina target and a lithium fluoride window, impacted by an alumina disk at velocities between 544 m/s and 2329 m/s, was also predicted. These one-dimensional flyer plate experiments were conducted at Sandia National Laboratories using Coors AD 995 alumina. The material strength and fracture models are important in the prediction of ceramic experiments. The models used in these predictions are discussed. The penetrations in the two-dimensional tests were predicted to 11.4 percent or better. In five of the six experiments, the predicted penetration depth was deeper than the measured value. This trend is expected since the calculation is based on ideal conditions. The results show that good agreement between the 1-D flyer plate data and the MESA predictions exists at the lower impact velocities, but the maximum velocity is overpredicted as the flyer plate velocity increases. At a flyer plate velocity of 2329 m/s the code overpredicted the data by 12.3 percent.

  19. 基于KaIi Linux的Web渗透测试研究%Study of Kali Linux Web based on Penetration Testing

    Institute of Scientific and Technical Information of China (English)

    徐光

    2015-01-01

    With the widespread of Internet appIications, the Internet is pIaying an increasingIy important roIe in aI aspects of sociaI Iife;at the same time, the appIication of Web system security is facing a severe test, Web penetration testing technoIogy has become an important means to ensure the security of Web. In this paper,based on the research of the weak in Web system security and the common vuInerabiIity , by the anaIysis of the basic steps of Web at ack, proposes a method of Web based on penetration test KaIi Linux, in order to achieve the purpose to evaIuate and improve the security of Web appIication system.%随着互联网应用的广泛普及,互联网在社会生活各个方面发挥着越来越重要的作用。与此同时,Web应用系统的安全面临着严峻考验,Web渗透测试技术已成为保障Web安全的一种重要手段。文章在研究Web系统安全脆弱性及常见漏洞基础上,通过分析黑客Web攻击的基本步骤,提出一种基于KaIi Linux进行Web渗透测试的方法,以实现评估和提高Web应用系统安全的目的。

  20. Full-Scale Dynamic Testing of Dolosse to Destruction

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    1981-01-01

    It is well known that the relative dynamic strength of unreinforced slender concrete units decreases as the size increases. Big units can resist relatively smaller movements than small units. When model tests of cover layer stability are performed the determination of the damage criterion...... that should be adopted must therefore be based on knowledge of the dynamic strength of the corresponding prototype units. With the purpose of establishing a relationship between the size and the dynamic strength of unreinforced units, some full-scale tests to destruction of 1.5 and 5.4 t units were performed...

  1. Testing for viral penetration of non-latex surgical and examination gloves: a comparison of three methods.

    Science.gov (United States)

    O'Connell, K P; El-Masri, M; Broyles, J B; Korniewicz, D M

    2004-04-01

    Currently, there are no international standards based on microbiological methodology for testing the ability of medical examination or surgical gloves to prevent the passage of viruses. Three protocols for the direct examination of the viral barrier properties of non-latex gloves were compared with 1080 gloves (270 gloves from each of two surgical brands and two medical examination brands). In two of the methods, gloves were filled with and suspended in a nutrient broth solution, and bacteriophage phiX174 was placed either inside or outside the glove, while the entire test vessel was agitated. Gloves tested using the third method were filled with a suspension of bacteriophage and allowed to rest in a vessel containing nutrient broth. Gloves were tested directly from the manufacturer's packaging, or after being punctured intentionally or subjected to a stress protocol. The passage of bacteriophage was detected with plaque assays. Significant differences in failure rates between glove brands were apparent only among gloves that had been subjected to the stress protocol. Overall, the two methods in which bacteriophage were placed inside the gloves provided more sensitivity than the method in which bacteriophage was spiked into broth outside the gloves. Thus the placement of bacteriophage inside test gloves (or the use of pressure across the glove barrier during testing), and the use of a standardised stress protocol, will improve significantly the ability of a glove test protocol to determine the relative quality of the barrier offered by medical examination and surgical gloves. Further research is needed to provide test methods that can incorporate reproducibly both the use of bacteriophage and simulated glove use in an industrial quality control setting.

  2. Dynamic Testing and Test Anxiety amongst Gifted and Average-Ability Children

    Science.gov (United States)

    Vogelaar, Bart; Bakker, Merel; Elliott, Julian G.; Resing, Wilma C. M.

    2017-01-01

    Background: Dynamic testing has been proposed as a testing approach that is less disadvantageous for children who may be potentially subject to bias when undertaking conventional assessments. For example, those who encounter high levels of test anxiety, or who are unfamiliar with standardized test procedures, may fail to demonstrate their true…

  3. Soil properties and performance of landmine detection by metal detector and ground-penetrating radar — Soil characterisation and its verification by a field test

    Science.gov (United States)

    Takahashi, Kazunori; Preetz, Holger; Igel, Jan

    2011-04-01

    Metal detectors have commonly been used for landmine detection, and ground-penetrating radar (GPR) is about to be deployed for this purpose. These devices are influenced by the magnetic and electric properties of soil, since both employ electromagnetic techniques. Various soil properties and their spatial distributions were measured and determined with geophysical methods in four soil types where a test of metal detectors and GPR systems took place. By analysing the soil properties, these four soils were classified based on the expected influence of each detection technique and predicted soil difficulty. This classification was compared to the detection performance of the detectors and a clear correlation between the predicted soil difficulty and performance was observed. The detection performance of the metal detector and target identification performance of the GPR systems degraded in soils that were expected to be problematic. Therefore, this study demonstrated that the metal detector and GPR performance for landmine detection can be assessed qualitatively by geophysical analyses.

  4. Penetrator strength effect in long-rod critical ricochet angle

    Energy Technology Data Exchange (ETDEWEB)

    Daneshjou, K.; Shahravi, M. [Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

    2008-11-15

    3D numerical simulations were performed in order to further investigate the role of penetrator strength in the interaction of long-rods and oblique targets. Three distinctive regimes resulting from oblique impact depending on the obliquity, namely simple ricochet, critical ricochet and target perforation, were investigated in detail. Critical ricochet angles were calculated with a full 3D explicit finite element method for various impact velocities and strength of target plates and projectiles. Numerical predictions were compared with existing two-dimensional analytical models and test results. It was predicted that critical ricochet angle increases with decreasing impact velocity and that higher ricochet angles were expected if higher strength target materials are employed. But there are differences between analytical models and 3D numerical simulation results or test results. The causes for these discrepancies are established by numerical simulations which explore the validity of the penetrator strength parameter in the analytical model as a physical entity. As a matter of fact, in this paper we first investigate the role of penetrator dynamic strength using two-dimensional simulation which resulted in different penetrator strengths out of different impact velocities. Next, by applying these amounts for penetrator strength in Rosenberg analytical model the critical ricochet angle is calculated. Finally, a comparison between the present analytical method with the 3D simulation and test results shows that the new analytical approach leads to modified results with respect to Rosenberg ones

  5. Dynamic test devices for analyzing the tensile properties of concrete

    NARCIS (Netherlands)

    Forquin, P.; Riedel, W.; Weerheijm, J.

    2013-01-01

    Owing to their low tensile failure strain, concrete is a difficult material to test under dynamic tensile loading. Indeed, conventional testing apparatuses such as high-speed hydraulic presses or Split Hopkinson Bar facilities rely on a mechanical balance of the specimen implying a short round-trip

  6. Test and Numerical Analysis for Penetration Residual Velocity of Bullet Considering Failure Strain Uncertainty of Composite Plates

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Myungseok; Lee, Minhyung [Sejong Univ., Sejong (Korea, Republic of)

    2016-03-15

    The ballistic performance data of composite materials is distributed due to material inhomogeneity. In this paper, the uncertainty in residual velocity is obtained experimentally, and a method of predicting it is established numerically for the high-speed impact of a bullet into laminated composites. First, the failure strain distribution was obtained by conducting a tensile test using 10 specimens. Next, a ballistic impact test was carried out for the impact of a fragment-simulating projectile (FSP) bullet with 4ply ([0/90]s) and 8ply ([0/90/0/90]s) glass fiber reinforced plastic (GFRP) plates. Eighteen shots were made at the same impact velocity and the residual velocities were obtained. Finally, simulations were conducted to predict the residual velocities by using the failure strain distributions that were obtained from the tensile test. For this simulation, two impact velocities were chosen at 411.7m/s (4ply) and 592.5m/s (8ply). The simulation results show that the predicted residual velocities are in close agreement with test results. Additionally, the modeling of a composite plate with layered solid elements requires less calculation time than modeling with solid elements.

  7. Analysis by numerical calculations of the depth and dynamics of the penetration of ordered cellular structure made by casting from AlSi10Mg eutectic alloy

    Directory of Open Access Journals (Sweden)

    M. Małysza

    2011-07-01

    Full Text Available Owing to high plastic deformability while maintaining stress values constant and relatively low, ordered cellular structures arecharacterised by excellent properties and the ability to dissipate the impact energy. Due to the low weight, structures of this type can beused, among others, for different parts of motor vehicles. For tests, a trapezoidal ordered cellular structure of 50.8 x 50.8 x 25.4 (mmoverall dimensions was selected. It was made as an investment casting from AlSi9Mg eutectic alloy by the method of Rapid Prototyping(RP. During FEM computations using an Abaqus programme, it was assumed that the material is isotropic and exhibits the features of anelastic – plastic body, introducing to calculations the, listed in a table, values of the stress-strain curve obtained in tensile tests performedon a MTS testing machine (10T. The computations used Johnson - Cook model, which is usually sufficiently accurate when modelling thephenomena of penetration of an element by an object of high initial velocity. The performed numerical calculations allowed identification

  8. Technical Analysis and Characterization of Southern Cayo, Belize for Tropical Testing and Evaluation of Foliage Penetration Remote Sensing Systems

    Science.gov (United States)

    2011-05-01

    34 (actually mainly sedges). Savanna is maintained as open vegetation by a combination of wet-season flooding, dry-season drought and fire . Typical trees...bark, covered up and colored by lichens growing on the surface. Vascular plant species, including trees, are identified to species according to their...all munitions firing must be conducted on ranges approved for all safety standards. Testing of smokes and obscurants requires a relatively flat area

  9. Dynamic Modeling, Testing, and Stability Analysis of an Ornithoptic Blimp

    Institute of Scientific and Technical Information of China (English)

    John Dietl; Thomas Herrmann; Gregory Reich; Ephrahim Garcia

    2011-01-01

    In order to study omithopter flight and to improve a dynamic model of flapping propulsion,a series of tests are conducted on a flapping-wing blimp.The blimp is designed and constructed from mylar plastic and balsa wood as a test platform for aerodynamics and flight dynamics.The blimp,2.3 meters long and 420 gram mass,is propelled by its flapping wings.Due to buoyancy the wings have no lift requirement so that the distinction between lift and propulsion can be analyzed in a flight platform at low flight speeds.The blimp is tested using a Vicon motion tracking system and various initial conditions are tested including accelerating flight from standstill,decelerating from an initial speed higher than its steady state,and from its steady-state speed but disturbed in pitch angle.Test results are used to estimate parameters in a coupled quasi-steady aerodynamics/Newtonian flight dynamics model.This model is then analyzed using Floquet theory to determine local dynamic modes and stability.It is concluded that the dynamic model adequately describes the vehicle's nonlinear behavior near the steady-state velocity and that the vehicle's linearized modes are akin to those of a fixed-wing aircraft.

  10. Ergodicity convergence test suggests telomere motion obeys fractional dynamics

    Science.gov (United States)

    Kepten, E.; Bronshtein, I.; Garini, Y.

    2011-04-01

    Anomalous diffusion, observed in many biological processes, is a generalized description of a wide variety of processes, all obeying the same law of mean-square displacement. Identifying the basic mechanisms of these observations is important for deducing the nature of the biophysical systems measured. We implement a previously suggested method for distinguishing between fractional Langevin dynamics, fractional Brownian motion, and continuous time random walk based on the ergodic nature of the data. We apply the method together with the recently suggested P-variation test and the displacement correlation to the lately measured dynamics of telomeres in the nucleus of mammalian cells and find strong evidence that the telomeres motion obeys fractional dynamics. The ergodic dynamics are observed experimentally to fit fractional Brownian or Langevin dynamics.

  11. Cement penetration after patella venting.

    Science.gov (United States)

    Jones, Christopher W; Lam, Li-On; Butler, Adam; Wood, David J; Walsh, William R

    2009-01-01

    There is a high rate of patellofemoral complications following total knee arthroplasty. Optimization of the cement-bone interface by venting and suction of the tibial plateau has been shown to improve cement penetration. Our study was designed to investigate if venting the patella prior to cementing improved cement penetration. Ten paired cadaver patellae were allocated prior to resurfacing to be vented or non-vented. Bone mineral density (BMD) was measured by DEXA scanning. In vented specimens, a 1.6 mm Kirschner wire was used to breach the anterior cortex at the center. Specimens were resurfaced with standard Profix instrumentation and Versabond bone cement (Smith and Nephew PLC, UK). Cement penetration was assessed from Faxitron and sectioned images by a digital image software package (ImageJ V1.38, NIH, USA). Wilcoxon rank sum test was used to assess the difference in cement penetration between groups. The relationship between BMD and cement penetration was analyzed by Pearson correlation coefficient. There was a strong negative correlation between peak BMD and cement penetration when analyzed independent of experimental grouping (r(2)=-0.812, p=0.004). Wilcoxon rank sum testing demonstrated no significant difference (rank sum statistic W=27, p=0.579) in cement penetration between vented (10.53%+/-4.66; mean+/-std dev) and non-vented patellae (11.51%+/-6.23; mean+/-std dev). Venting the patella using a Kirschner wire does not have a significant effect on the amount of cement penetration achieved in vitro using Profix instrumentation and Versabond cement.

  12. Influence of jet thrust on penetrator penetration when studying the structure of space object blanket

    Directory of Open Access Journals (Sweden)

    N. A. Fedorova

    2014-01-01

    Full Text Available The article presents the calculation-and-theory-based research results to examine the possibility for using the jet thrust impulse to increase a penetration depth of high-velocity penetrator modules. Such devices can be used for studies of Earth surface layer composition, and in the nearest future for other Solar system bodies too. Research equipment (sensors and different instruments is housed inside a metal body of the penetrator with a sharpened nose that decreases drag force in soil. It was assumed, that this penetrator is additionally equipped with the pulse jet engine, which is fired at a certain stage of penetrator motion into target.The penetrator is considered as a rigid body of variable mass, which is subjected to drag force and reactive force applied at the moment the engine fires. A drag force was represented with a binomial empirical law, and penetrator nose part was considered to be conical. The jet thrust force was supposed to be constant during its application time. It was in accordance with assumption that mass flow and flow rate of solid propellant combustion products were constant. The amount of propellant in the penetrator was characterized by Tsiolkovsky number Z, which specifies the ratio between the fuel mass and the penetrator structure mass with no fuel.The system of equations to describe the penetrator dynamics was given in dimensionless form using the values aligned with penetration of an equivalent inert penetrator as the time and penetration depth scales. Penetration dynamics of penetrator represented in this form allowed to eliminate the influence of penetrator initial mass and its cross-section diameter on the solution results. The lack of such dependency is convenient for comparing the calculation results since they hold for penetrators of various initial masses and cross-sections.To calculate the penetration a lunar regolith was taken as a soil material. Calculations were carried out for initial velocities of

  13. OOK power model based dynamic error testing for smart electricity meter

    Science.gov (United States)

    Wang, Xuewei; Chen, Jingxia; Yuan, Ruiming; Jia, Xiaolu; Zhu, Meng; Jiang, Zhenyu

    2017-02-01

    This paper formulates the dynamic error testing problem for a smart meter, with consideration and investigation of both the testing signal and the dynamic error testing method. To solve the dynamic error testing problems, the paper establishes an on-off-keying (OOK) testing dynamic current model and an OOK testing dynamic load energy (TDLE) model. Then two types of TDLE sequences and three modes of OOK testing dynamic power are proposed. In addition, a novel algorithm, which helps to solve the problem of dynamic electric energy measurement’s traceability, is derived for dynamic errors. Based on the above researches, OOK TDLE sequence generation equipment is developed and a dynamic error testing system is constructed. Using the testing system, five kinds of meters were tested in the three dynamic power modes. The test results show that the dynamic error is closely related to dynamic power mode and the measurement uncertainty is 0.38%.

  14. Application of Dynamic Slicing in Test Data Generation

    Institute of Scientific and Technical Information of China (English)

    QUO Suwei; ZHAO Ruilian; LI Lijian

    2007-01-01

    The program slicing technique is employed to calculate the current values of the variables at some interest points in software test data generation. This paper introduces the concept of statement domination to represent the multiple nests, and presents a dynamic program slice algorithm based on forward analysis to generate dynamic slices. In the approach, more attention is given to the statement itself or its domination node, so computing program slices is more easy and accurate, especially for those programs with multiple nests. In addition, a case study is discussed to illustrate our algorithm. Experimental results show that the slicing technique can be used in software test data generation to enhance the effectiveness.

  15. Cumulative Measurement Errors for Dynamic Testing of Space Flight Hardware

    Science.gov (United States)

    Winnitoy, Susan

    2012-01-01

    Located at the NASA Johnson Space Center in Houston, TX, the Six-Degree-of-Freedom Dynamic Test System (SDTS) is a real-time, six degree-of-freedom, short range motion base simulator originally designed to simulate the relative dynamics of two bodies in space mating together (i.e., docking or berthing). The SDTS has the capability to test full scale docking and berthing systems utilizing a two body dynamic docking simulation for docking operations and a Space Station Remote Manipulator System (SSRMS) simulation for berthing operations. The SDTS can also be used for nonmating applications such as sensors and instruments evaluations requiring proximity or short range motion operations. The motion base is a hydraulic powered Stewart platform, capable of supporting a 3,500 lb payload with a positional accuracy of 0.03 inches. The SDTS is currently being used for the NASA Docking System testing and has been also used by other government agencies. The SDTS is also under consideration for use by commercial companies. Examples of tests include the verification of on-orbit robotic inspection systems, space vehicle assembly procedures and docking/berthing systems. The facility integrates a dynamic simulation of on-orbit spacecraft mating or de-mating using flight-like mechanical interface hardware. A force moment sensor is used for input during the contact phase, thus simulating the contact dynamics. While the verification of flight hardware presents unique challenges, one particular area of interest involves the use of external measurement systems to ensure accurate feedback of dynamic contact. The measurement systems for the test facility have two separate functions. The first is to take static measurements of facility and test hardware to determine both the static and moving frames used in the simulation and control system. The test hardware must be measured after each configuration change to determine both sets of reference frames. The second function is to take dynamic

  16. Research on Digital Dynamic Testing Technique for Electrohydraulic Servovalve

    Institute of Scientific and Technical Information of China (English)

    汪首坤; 王军政; 赵江波; 张宇河

    2003-01-01

    The digital testing technique based on computers for dynamic characteristics of electrohydraulic servovalves via frequency scan method is researched. The no-load piston which measures the servo's transient output flow is designed properly. The velocity testing method by which the speed signal can be obtained indirectly by means of a piezoelectral accelerometer is given. High speed sampling has been realized in Windows OS. Wavelet denoising and Fourier transform are adopted in data processing and analyses. The testing technique discussed has been applied to actual testing systems and the experimental results have proved it to be correct.

  17. Research on Penetration Test Based on The Android Platform%基于安卓的安全测试分析

    Institute of Scientific and Technical Information of China (English)

    王红凯; 龚小刚; 夏威; 吴科庆

    2015-01-01

    安卓手机系统是目前世界上最流行的智能手机操作系统之一。安卓是一个对第三方软件完全开放的平台,它具有开放性、服务免费、应用市场自由的特点,开发者在为其开发程序时拥有更大的自由度,和苹果的封闭性完全相反。对于中国用户来说,安卓手机的市场份额很大,但生态环境也最恶劣。手机上恶意软件横行肆虐,绝大多数手机病毒都是基于安卓系统,而苹果和微软的病毒却非常少,普遍认为,苹果手机安全性要远远高于安卓手机。文章就安卓系统上的安全测试技术进行讲解,对安卓相关的安全测试技术进行全面研究分析。%Android is an intel igent mobile phone operating system which is currently the most popular in the world. Android is completely open to third party software platform, which has the characteristics of open, free services, application of free market.Developers have more freedom in the development of applications for it, which is completely opposite to apple’s close. In China the amount of Android market is very large, but the ecological environment is the worst.Mobile phone malware run rampant, the vast majority of mobile phone virus are based on Android, when virus of IOS and WinPhone is much less. General y think, security of IOS which is not jailbreak is much bet er than that of the Android. This article carries on the analysis of explanation android penetration test, overal research and analysis of penetration tests technology related to Android.

  18. The Particle Dynamics of Penetration

    Science.gov (United States)

    1980-06-01

    terms of VozRL, vozPL and T. If we use these values in equation (5), we obtain Az T( voz - VozRL)/(VozPL - ozRL). (8) I ___ _ -- . b DEI. If v0 o< vozRL...then A < 0 and ricochet will occur. If voz > VozPL then Az > T and perforation will occur. If 0 < A < T, then embedment will occur. Thus A , the z

  19. Advanced WEC Dynamics & Controls FY16 Testing Report

    Energy Technology Data Exchange (ETDEWEB)

    Coe, Ryan Geoffrey [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bacelli, Giorgio [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilson, David G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Patterson, David Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-10-01

    A model-scale wave tank test was conducted in the interest of improving control systems design of wave energy converters (WECs). The success of most control strategies is based directly upon the availability of a reduced-order model with the ability to capture the dynamics of the system with sufficient accuracy. For this reason, the test described in this report, which is the first in a series of planned tests on WEC controls, focused on system identification (system ID) and model validation.

  20. Static and Dynamic Handgrip Strength Endurance: Test-Retest Reproducibility.

    Science.gov (United States)

    Gerodimos, Vassilis; Karatrantou, Konstantina; Psychou, Dimitra; Vasilopoulou, Theodora; Zafeiridis, Andreas

    2017-03-01

    This study investigated the reliability of static and dynamic handgrip strength endurance using different protocols and indicators for the assessment of strength endurance. Forty young, healthy men and women (age, 18-22 years) performed 2 handgrip strength endurance protocols: a static protocol (sustained submaximal contraction at 50% of maximal voluntary contraction) and a dynamic one (8, 10, and 12 maximal repetitions). The participants executed each protocol twice to assess the test-retest reproducibility. Total work and total time were used as indicators of strength endurance in the static protocol; the strength recorded at each maximal repetition, the percentage change, and fatigue index were used as indicators of strength endurance in the dynamic protocol. The static protocol showed high reliability irrespective of sex and hand for total time and work. The 12-repetition dynamic protocol exhibited moderate-high reliability for repeated maximal repetitions and percentage change; the 8- and 10-repetition protocols demonstrated lower reliability irrespective of sex and hand. The fatigue index was not a reliable indicator for the assessment of dynamic handgrip endurance. Static handgrip endurance can be measured reliably using the total time and total work as indicators of strength endurance. For the evaluation of dynamic handgrip endurance, the 12-repetition protocol is recommended, using the repeated maximal repetitions and percentage change as indicators of strength endurance. Practitioners should consider the static (50% maximal voluntary contraction) and dynamic (12 repeated maximal repetitions) protocols as reliable for the assessment of handgrip strength endurance. The evaluation of static endurance in conjunction with dynamic endurance would provide more complete information about hand function. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  1. A Study on the Dynamic Characteristics of HANARO Test Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Shin; Choi, M. H.; Song, S. Y. [Chungnam National University, Taejon (Korea, Republic of)

    1997-06-01

    A study on the dynamic characteristics of Type-B irradiation test fuel to be used on HANARO in-core are performed. To generate the valid finite element model, in-air vibration test is also performed, and the natural frequency and displacement of the Type-B fuel assembly are measured by in-core vibration test on HANARO. From the experimental and FEM results, the displacement in the top of test hole is predicted. The stress and fatigue analysis are conducted by static analysis using a finite element program. Finally, the effects on the mass and stiffness of the guide tube are evaluated for improvement of the vibration characteristics of the Type-B test Fuel. 9 refs., 22 tabs., 25 figs. (author)

  2. Efinaconazole 10% and Tavaborole 5% Penetrate Across Poly-ureaurethane 16%: Results of In Vitro Release Testing and Clinical Implications of Onychodystrophy in Onychomycosis.

    Science.gov (United States)

    Adigun, Chris G; Vlahovic, Tracey C; McClellan, Michael B; Thakker, Kailas D; Klein, Ryan R; Elstrom, Tuan A; Ward, Daniel B

    2016-09-01

    Poly-ureaurethane has been previously described for the management of dry, brittle, and in general, dystrophic nails. The polymer yields a waterproof, breathable barrier to protect the nail plate and prevent further damage to the nail, while regulating transonychial water loss (TOWL). Because nail dystrophy and dessication are contributing factors to onychomycosis, a barrier that protects the nail but also allows a topical antifungal to permeate its shield is potentially an advantageous combination. Oral antifungals such as terbinafine, itraconazole, and fluconazole, as well as the newer topical antifungals efinaconazole and tavaborole (although formulated to penetrate the nail unit and work with the porosity and inherent electrical charge of the nail plate), do not take into account nail damage that has been created from years of harboring a dermatophyte infection. Up to 50% of cases presumed to be onychomycosis are in fact onychodystrophy without fungal infection, and laboratory testing for fungus should be obtained prior to initiating antifungal treatment. Whether a nail has onychomycosis, or onychodystrophy due to other causes, barrier function and structural integrity are compromised in diseased nails, and should be addressed. A poly-ureaurethane barrier that protects against wetting/drying, fungal reservoirs, and microtrauma, followed by the addition of oral or topical antifungals after laboratory fungal confirmation may optimize outcomes in the treatment of onychomycosis. The purpose of this work was to determine through in vitro release testing (IVRT) whether poly-ureaurethane 16% allows for penetration of efinaconazole 10% or tavaborole 5%. Results could spur subsequent clinical studies which would have implications for the addition of an antifungal based on fungal confirmation, after addresssing the underlying nail dystrophy primarily. A vertical diffusion cell system was used to evaluate the ability of efinaconazole 10% and tavaborole 5% to penetrate

  3. THE DYNAMIC LEAP AND BALANCE TEST (DLBT): A TEST-RETEST RELIABILITY STUDY.

    Science.gov (United States)

    Jaffri, Abbis H; Newman, Thomas M; Smith, Brent I; John Miller, Sayers

    2017-08-01

    There is a need for new clinical assessment tools to test dynamic balance during typical functional movements. Common methods for assessing dynamic balance, such as the Star Excursion Balance Test, which requires controlled movement of body segments over an unchanged base of support, may not be an adequate measure for testing typical functional movements that involve controlled movement of body segments along with a change in base of support. The purpose of this study was to determine the reliability of the Dynamic Leap and Balance Test (DLBT) by assessing its test-retest reliability. It was hypothesized that there would be no statistically significant differences between testing days in time taken to complete the test. Reliability study. Thirty healthy college aged individuals participated in this study. Participants performed a series of leaps in a prescribed sequence, unique to the DLBT test. Time required by the participants to complete the 20-leap task was the dependent variable. Subjects leaped back and forth from peripheral to central targets alternating weight bearing from one leg to the other. Participants landed on the central target with the tested limb and were required to stabilize for two seconds before leaping to the next target. Stability was based upon qualitative measures similar to Balance Error Scoring System. Each assessment was comprised of three trials and performed on two days with a separation of at least six days. Two-way mixed ANOVA was used to analyze the differences in time to complete the sequence between the three trial averages of the two testing sessions. Intraclass Correlation Coefficient (ICC3,1) was used to establish between session test-retest reliability of the test trial averages. Significance was set a priori at p ≤ 0.05. No significant differences (p > 0.05) were detected between the two testing sessions. The ICC was 0.93 with a 95% confidence interval from 0.84 to 0.96. This test is a cost-effective, easy to

  4. Overview of the solar dynamic ground test demonstration program

    Science.gov (United States)

    Shaltens, Richard K.; Boyle, Robert V.

    1993-01-01

    The Solar Dynamic (SD) Ground Test Demonstration (GTD) program demonstrates the availability of SD technologies in a simulated space environment at the NASA Lewis Research Center (LeRC) vacuum facility. An aerospace industry/ government team is working together to design, fabricate, build, and test a complete SD system. This paper reviews the goals and status of the SD GTD program. A description of the SD system includes key design features of the system, subsystems, and components as reported at the Critical Design Review (CDR).

  5. Advances in monitoring dynamic hydrologic conditions in the vadose zone through automated high-resolution ground-penetrating radar imaging and analysis

    Science.gov (United States)

    Mangel, Adam R.

    This body of research focuses on resolving physical and hydrological heterogeneities in the subsurface with ground-penetrating radar (GPR). Essentially, there are two facets of this research centered on the goal of improving the collective understanding of unsaturated flow processes: i) modifications to commercially available equipment to optimize hydrologic value of the data and ii) the development of novel methods for data interpretation and analysis in a hydrologic context given the increased hydrologic value of the data. Regarding modifications to equipment, automation of GPR data collection substantially enhances our ability to measure changes in the hydrologic state of the subsurface at high spatial and temporal resolution (Chapter 1). Additionally, automated collection shows promise for quick high-resolution mapping of dangerous subsurface targets, like unexploded ordinance, that may have alternate signals depending on the hydrologic environment (Chapter 5). Regarding novel methods for data inversion, dispersive GPR data collected during infiltration can constrain important information about the local 1D distribution of water in waveguide layers (Chapters 2 and 3), however, more data is required for reliably analyzing complicated patterns produced by the wetting of the soil. In this regard, data collected in 2D and 3D geometries can further illustrate evidence of heterogeneous flow, while maintaining the content for resolving wave velocities and therefore, water content. This enables the use of algorithms like reflection tomography, which show the ability of the GPR data to independently resolve water content distribution in homogeneous soils (Chapter 5). In conclusion, automation enables the non-invasive study of highly dynamic hydrologic processes by providing the high resolution data required to interpret and resolve spatial and temporal wetting patterns associated with heterogeneous flow. By automating the data collection, it also allows for the novel

  6. Optical Fibres Contactless Sensor for Dynamic Testing of Lightweight Structures

    Directory of Open Access Journals (Sweden)

    L. Bregant

    2008-01-01

    Full Text Available With dynamic testing, engineers describe activities focused on the identification of some properties of vibrating structures. This step requires for the measurements of excitations and responses signals, applying appropriate sensors directly on the test article. These instruments modify the system's mass and stiffness distributions and eventually the eigen-properties of the structure. These errors become unacceptable especially when testing lightweight structures. This paper shows the results of some tests performed on a small compressor with the purpose of identifying the blades’ natural frequencies and modes. It compares the acquisitions performed with standard accelerometers and two different contact-less systems using as exciters either a micro-hammer or a micro inertial shaker. The paper shows how the contact-less sensors provide good quality data and consistent results in the mode identification phase.

  7. Three-dimensional analysis of a developing sinkhole using GPR and dynamic cone penetrometer (DCP) testing

    Science.gov (United States)

    Brook, Martin; Gaines, Andrew; Nobes, David

    2016-04-01

    Ground penetrating radar (GPR) imaging is one of the most promising non-destructive and non-invasive methods that have offered new opportunities for mapping shallow subsurface disturbances in urbanized and industrialized zones. However, difficulties often arise in choosing the optimum antenna frequency to image subsurface features. While high frequency antennas may provide lots of detail, lower frequency antennas may provide information on larger-scale features that provide more site context. In this study, we performed GPR surveys to investigate a zone of subtle surface subsidence and pavement cracking on reclaimed land at a quayside. A 3-stage approach was used, and included: (1) a 250 MHz antenna survey to delineate the spatial extent of the area of interest; (2) a 500 MHz antenna survey to yield greater detail; and (3) direct verification of some of the key features using dynamic cone penetrometer (DCP) testing to "ground-truth" anomalies. This staged approach proved successful in imaging the sub-grade, and minor voids within approximately 2 m depth. Moreover, the quality of the data can be further improved by using GPR-Slice software in conjunction with DCP data to develop a 3D ground model. Through this approach, a combination of GPR survey and direct testing, we demonstrate the efficiency and quality of this method in mapping shallow subsidence features. An interpretation of the process-origin of the collapse feature is also proposed.

  8. Testing and Validation of the Dynamic Inertia Measurement Method

    Science.gov (United States)

    Chin, Alexander W.; Herrera, Claudia Y.; Spivey, Natalie D.; Fladung, William A.; Cloutier, David

    2015-01-01

    The Dynamic Inertia Measurement (DIM) method uses a ground vibration test setup to determine the mass properties of an object using information from frequency response functions. Most conventional mass properties testing involves using spin tables or pendulum-based swing tests, which for large aerospace vehicles becomes increasingly difficult and time-consuming, and therefore expensive, to perform. The DIM method has been validated on small test articles but has not been successfully proven on large aerospace vehicles. In response, the National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) conducted mass properties testing on an "iron bird" test article that is comparable in mass and scale to a fighter-type aircraft. The simple two-I-beam design of the "iron bird" was selected to ensure accurate analytical mass properties. Traditional swing testing was also performed to compare the level of effort, amount of resources, and quality of data with the DIM method. The DIM test showed favorable results for the center of gravity and moments of inertia; however, the products of inertia showed disagreement with analytical predictions.

  9. Simulation of laser penetration efficiency

    Science.gov (United States)

    Semak, V. V.; Miller, T. F.

    2013-09-01

    The results of numerical simulation of laser beam interaction with a hypothetical metallic material with properties similar to a steel alloy are reported. The numerical simulation was performed using a physical model that includes detailed consideration of surface evaporation, evaporative cooling of the surface and evaporation recoil induced melt ejection. The laser beam ‘penetration’ is considered in terms of melting through the sample or drilling through the sample due to both evaporation and recoil ejection of material. As a demonstration of the predictive capabilities of the model, the average velocity of penetration through a material with steel-like properties is numerically predicted for various laser interaction parameters such as, laser beam radius, laser pulse duration (including CW regime), laser pulse energy and pulse repetition. In particular, the average penetration velocities through a sample due to melting are compared for pulsed and CW lasers of the same power. For the sake of another demonstration of penetration simulation, the temporal dynamics of the position of melt front relative to the sample surface irradiated by a laser beam was computed for different laser pulse repetition rates and constant average laser power. An illustration of the penetration efficiency (W parameter) defined as the amount of energy per unit volume delivered into a target in order to achieve either melting of drilling through a target wall is shown in a wide range of laser pulse parameters covering regimes corresponding to domination of melting through and drilling through.

  10. Platform for dynamic tests: preliminary studies, design and construction

    Directory of Open Access Journals (Sweden)

    J. E. Campuzano

    Full Text Available This paper is about the design and construction of a platform for dynamic tests especially with people jumping, walking, etc. Initially it was tried to find out projects already implemented in platforms and dynamic tests and to study the loads produced by movement of people on slabs and the structural response to these loads. The limits established by different standards have been also studied for these dynamic responses, taking into account the ultimate limit state, as well as the structure in service, since the human body is very sensitive to structural vibrations. Parametric studies were performed considering various configurations of slabs (different spans, thicknesses and conditions of support have been done, looking for a configuration that could have natural frequency close to the frequencies of the human loads. The slab should have dimensions compatible with the available physical space, fundamental frequency below 5 Hz and maximum immediate deflection compatible with the indications of the Brazilian standard NBR6118: 2007. Based on these criteria was chosen a rectangular structure consists of a solid reinforced concrete rectangular slab studded in two opposite edges of steel beams with shear connectors type U. The other two edges are free. The steel beams supporting the slab, in turn, are supported on eight metal profiles (two in each corner of the slab that are supported on two to two short columns of steel profile H. Profiles U in steel are welded to four columns, forming a horizontal frame. Numerical analysis of the dynamic test platform have been performed for free and forced vibration, for obtaining the natural frequencies and corresponding vibration modes, considering the self-weight of the structure and the load that simulates people's weight. After obtaining a structural configuration that fulfilled the stipulated requirements, the design of the slab taking into account the recommendations of the Brazilian standard NBR6118: 2007

  11. Using Spare Logic Resources To Create Dynamic Test Points

    Science.gov (United States)

    Katz, Richard; Kleyner, Igor

    2011-01-01

    A technique has been devised to enable creation of a dynamic set of test points in an embedded digital electronic system. As a result, electronics contained in an application specific circuit [e.g., gate array, field programmable gate array (FPGA)] can be internally probed, even when contained in a closed housing during all phases of test. In the present technique, the test points are not fixed and limited to a small number; the number of test points can vastly exceed the number of buffers or pins, resulting in a compact footprint. Test points are selected by means of spare logic resources within the ASIC(s) and/or FPGA(s). A register is programmed with a command, which is used to select the signals that are sent off-chip and out of the housing for monitoring by test engineers and external test equipment. The register can be commanded by any suitable means: for example, it could be commanded through a command port that would normally be used in the operation of the system. In the original application of the technique, commanding of the register is performed via a MIL-STD-1553B communication subsystem.

  12. An automated dynamic water vapor permeation test method

    Science.gov (United States)

    Gibson, Phillip; Kendrick, Cyrus; Rivin, Donald; Charmchii, Majid; Sicuranza, Linda

    1995-05-01

    This report describes an automated apparatus developed to measure the transport of water vapor through materials under a variety of conditions. The apparatus is more convenient to use than the traditional test methods for textiles and clothing materials, and allows one to use a wider variety of test conditions to investigate the concentration-dependent and nonlinear transport behavior of many of the semipermeable membrane laminates which are now available. The dynamic moisture permeation cell (DMPC) has been automated to permit multiple setpoint testing under computer control, and to facilitate investigation of transient phenomena. Results generated with the DMPC are in agreement with and of comparable accuracy to those from the ISO 11092 (sweating guarded hot plate) method of measuring water vapor permeability.

  13. Dynamic Brazilian Test for Mechanical Characterization of Ceramic Ballistic Protection

    Directory of Open Access Journals (Sweden)

    Martina Scapin

    2017-01-01

    Full Text Available The aim of this work is to identify the tensile strength of alumina (Corbit98, by performing Brazilian tests at different loading rate. In this kind of test, generally used for brittle material in static loading conditions, a cylindrical specimen is diametrically compressed and failure is generated in the middle of the component as a consequence of a positive tensile stress. In this work, this experimental technique was applied also in dynamic loading conditions by using a setup based on the Split Hopkinson Pressure Bar. Due to the properties of the investigated material, among which are high hardness, high compressive strength, and brittle behaviour, some precautions were needed to assure the validity of the tests. Digital Image Correlation techniques were applied for the analysis of high framerate videos.

  14. Dynamic Investigation Test-rig on hAptics (DITA)

    Science.gov (United States)

    Cannella, F.; Scalise, L.; Olivieri, E.; Memeo, M.; Caldwell, D. G.

    2013-09-01

    Research on tactile sensitivity has been conducted since the last century and many devices have been proposed to study in detail this sense through experimental tests. The sense of touch is essential in every-day life of human beings, but it can also play a fundamental role for the assessment of some neurological disabilities and pathologies. In fact, the level of tactile perception can provide information on the health state of the nervous system. In this paper, authors propose the design and development of a novel test apparatus, named DITA (Dynamic Investigation Test-rig on hAptics), aiming to provide the measurement of the tactile sensitivity trough the determination of the Just Noticeable Difference (JND) curve of a subject. The paper reports the solution adopted for the system design and the results obtained on the set of experiments carried out on volunteers.

  15. Isomorphism testing and display of symmetries in dynamic trees

    Energy Technology Data Exchange (ETDEWEB)

    Siu-Wing Cheng; Moon-Pun Ng [Hong Kong Univ. of Science and Technology (Hong Kong)

    1996-12-31

    We describe data structures for maintaining a set of trees so that isomorphism testing for any two trees can be performed in O(1) time. Updates include inserting an edge to merge two trees or removing an edge to split a tree into two smaller trees. Each update can be performed in O(log{sup 2} n log m log* m) time, where n is the total size of trees involved and m is the number of updates performed so far. The space needed per update is O(log{sup 2} n(log*m + log n)). We apply this result to display symmetries in dynamic free trees. A framework for dynamic symmetric drawing of free trees is developed, which supports the drawing of subtrees in an output-sensitive manner.

  16. A dynamic ball compression test for understanding rock crushing.

    Science.gov (United States)

    Huang, S; Liu, H; Xia, K

    2014-12-01

    During crushing, rock particles are subjected to complicated loading. It is desired to establish the relation between the loading and the fragmentation parameters for better understanding rock crushing mechanism. In this work, a split Hopkinson pressure bar system in combination with high speed cameras is utilized in the dynamic ball compression test, in which the spherical rock sample is adopted to avoid the shape effect. Using elasticity theory, the loading rate and the dynamic indirect tensile strength are first calculated. With the aid of the moment-trap technique and high speed cameras, the surface energy is determined for each sample. The relations between the loading rate and the fragmentation parameters, i.e., the number of fragments and the surface energy are established. The application of this method to a granitic rock shows that it is flexible and can be applied to the crushing study of generic brittle solids.

  17. Analysis of vertical projectile penetration in granular soils

    Science.gov (United States)

    Boguslavskii, Yu; Drabkin, S.; Salman, A.

    1996-03-01

    A model of vertical dynamic penetration of projectiles in granular soils was developed based on known experiments and the theory of dimensions. The depth of penetration is derived as a function of initial velocity and material properties. Velocity and acceleration are obtained as functions of time and depth of penetration. Under certain conditions two acceleration peaks are observed, an initial one due to dynamic and a second one due to static characteristics of penetration. Static properties of soils are derived using dynamic measurements. Numerical examples are provided. Theoretical and experimental results coincide reasonably well.

  18. SOFTWARE TESTING OF THE RAIL VEHICLE DYNAMIC CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Sanjin Troha

    2015-08-01

    Full Text Available The modern construction concept and the determination of the machine system characteristics anticipate CAD design. Creating model that will be tested using FEM and other methods for determining stress-strain is a very important part of rail vehicle construction. Applicative software package consists of linear and non–linear methods for the prediction of railway vehicle behavior and various methods of analysis have been assembled into a single coherent package in order to allow real problems in railway vehicle dynamics to be solved.

  19. Follicular penetration and targeting.

    Science.gov (United States)

    Lademann, Jürgen; Otberg, Nina; Jacobi, Ute; Hoffman, Robert M; Blume-Peytavi, Ulrike

    2005-12-01

    In the past, intercellular penetration was assumed to be the most important penetration pathway of topically applied substances. First hints that follicular penetration needs to be taken into consideration were confirmed by recent investigations, presented during the workshop "Follicular Penetration and Targeting" at the 4th Intercontinental Meeting of Hair Research Societies", in Berlin 2004. Hair follicles represent an efficient reservoir for the penetration of topically applied substances with subsequent targeting of distinct cell populations, e.g., nestin-expressing follicular bulge cells. The volume of this reservoir can be determined by differential stripping technology. The follicular penetration processes are significantly influenced by the state of the follicular infundibulum; recent experimental investigations could demonstrate that it is essential to distinguish between open and closed hair follicles. Topically applied substances can only penetrate into open hair follicle. Knowledge of follicular penetration is of high clinical relevance for functional targeting of distinct follicular regions. Human hair follicles show a hair-cycle-dependent variation of the dense neuronal and vascular network. Moreover, during hair follicle cycling with initiation of anagen, newly formed vessels occur. Thus, the potential of nestin-expressing hair follicle stem cells to form neurons and blood vessels was investigated.

  20. Testing consistency of general relativity with kinematic and dynamical probes

    CERN Document Server

    Duan, Xiao-Wei; Zhang, Tong-Jie

    2016-01-01

    In this work, we test consistency relations between a kinematic probe, the observational Hubble data, and a dynamical probe, the growth rates for cosmic large scale structure, which should hold if general relativity is the correct theory of gravity on cosmological scales. Moreover, we summarize the development history of parametrization in testings and make an improvement of it. Taking advantage of the Hubble parameter given from both parametric and non-parametric methods, we propose three equations and test two of them performed by means of two-dimensional parameterizations, including one using trigonometric functions we propose. As a result, it is found that the consistency relations satisfies well at $1\\sigma$ CL and trigonometric functions turn out to be efficient tools in parameterizations. Furthermore, in order to confirm the validity of our test, we introduce a model of modified gravity, DGP model and compare the testing results in the cases of $\\Lambda$CDM, "DGP in GR" and DGP model with mock data. It...

  1. An improved dynamic test method for solar collectors

    DEFF Research Database (Denmark)

    Kong, Weiqiang; Wang, Zhifeng; Fan, Jianhua

    2012-01-01

    A comprehensive improvement of the mathematical model for the so called transfer function method is presented in this study. This improved transfer function method can estimate the traditional solar collector parameters such as zero loss coefficient and heat loss coefficient. Two new collector...... parameters t and mfCf are obtained. t is a time scale parameter which can indicate the heat transfer ability of the solar collector. mfCf can be used to calculate the fluid volume content in the solar collector or to validate the regression process by comparing it to the physical fluid volume content...... if known. Experiments were carried out under dynamic test conditions and then test data were processed using multi-linear regression method to get collector parameters with statistic analysis. A comparison of the collector parameters obtained from the improved transfer function (ITF) method and the quasi...

  2. Sensitivity of The Dynamic Visual Acuity Test To Sensorimotor Change

    Science.gov (United States)

    Cohen, Helen; Bloomberg, Jacob; Elizalde, Elizabeth; Fregia, Melody

    1999-01-01

    Post-flight astronauts, acutely post-vestibular nerve section patients, and patients with severe chronic bilateral vestibular deficits have oscillopsia caused by reduced vestibulocular reflex gains and decreased postural stability. Therefore, as previous work has shown, a test of dynamic visual acuity (DVA), in which the subject must read numbers from a computer screen while standing still or walking in place provides a composite measure of sensorimotor integration. This measure may be useful for determining the level of recovery, post-flight, post-operatively, or after vestibular rehabilitation. To determine the sensitivity of DVA to change in impaired populations we have tested patients with acoustic neuromas before and during the first post-operative week after resection of the tumors, and with bilaterally labyrinthine deficient subjects before and after six weeks of balance rehabilitation therapy.

  3. FAA Fluorescent Penetrant Laboratory Inspections

    Energy Technology Data Exchange (ETDEWEB)

    WINDES,CONNOR L.; MOORE,DAVID G.

    2000-08-02

    The Federal Aviation Administration Airworthiness Assurance NDI Validation Center currently assesses the capability of various non-destructive inspection (NDI) methods used for analyzing aircraft components. The focus of one such exercise is to evaluate the sensitivity of fluorescent liquid penetrant inspection. A baseline procedure using the water-washable fluorescent penetrant method defines a foundation for comparing the brightness of low cycle fatigue cracks in titanium test panels. The analysis of deviations in the baseline procedure will determine an acceptable range of operation for the steps in the inspection process. The data also gives insight into the depth of each crack and which step(s) of the inspection process most affect penetrant sensitivities. A set of six low cycle fatigue cracks produced in 6.35-mm thick Ti-6Al-4V specimens was used to conduct the experiments to produce sensitivity data. The results will document the consistency of the crack readings and compare previous experiments to find the best parameters for water-washable penetrant.

  4. Simulated meteoroid penetration of reusable surface insulation

    Science.gov (United States)

    Lehman, J. K.; Christensen, H. E.

    1973-01-01

    Meteoroid impact simulation test results on insulation tiles were used to determine penetration resistance of reusable surface insulation attached to simulated shuttle structures. The probability of no meteoroid damage to a typical shuttle orbiter was determined. Specimens were plasma jet tested to determine effects of various size meteoroid cavities on their thermal performance. None of the tiles failed catastrophically, but large, egg-shaped craters did result from meteoroid penetration. The metallic side of a specimen that was completely penetrated showed a petalled hole typical for thin gage shielded structures.

  5. Dynamic testing of railway metal culvert using geodetic methods

    Directory of Open Access Journals (Sweden)

    Beben Damian

    2017-01-01

    Full Text Available The objective of the study was to compare and assess suitability of two methods of geodetic measurements (tachymetry i interferometry used to determine changes of the geometric condition of building and engineering structures. The paper presents the selected results of experimental tests under dynamic loads that were conducted on a railway metal culvert. The dynamic loads were caused by the passages of various trains. The measurements were made for all trains which had been running over the culvert during a 24 hour period. Advantages and disadvantages of both applied methods were characterized. The disadvantage of the tachymetry method is the discreteness of measurements and the lack of the possibility of verifying the results after finishing the field works. The tachymetry measurements were conducted using precise tachymetry manufactured by Leica TC2002. The IBIS microwave coherent radar was used in the interferometry method. Moreover, a special microwave horns IBIS-H23 type with a maximum gain of 23 dBi were used as the interferometer antennas (transmitting and receiving. Conclusions drawn from the tests can be helpful in the measurements of such culverts.

  6. Dynamic Brazilian Tests of Granite Under Coupled Static and Dynamic Loads

    Science.gov (United States)

    Zhou, Zilong; Li, Xibing; Zou, Yang; Jiang, Yihui; Li, Guonan

    2014-03-01

    Rocks in underground projects at great depth, which are under high static stresses, may be subjected to dynamic disturbance at the same time. In our previous work (Li et al. Int J Rock Mech Min Sci 45(5):739-748, 2008), the dynamic compressive behaviour of pre-stressed rocks was investigated using coupled-load equipment. The current work is devoted to the investigation of the dynamic tensile behaviour of granite rocks under coupled loads using the Brazilian disc (BD) method with the aid of a high-speed camera. Through wave analyses, stress measurements and crack photography, the fundamental problems of BD tests, such as stress equilibrium and crack initiation, were investigated by the consideration of different loading stresses with abruptly or slowly rising stress waves. The specially shaped striker method was used for the coupled-load test; this generates a slowly rising stress wave, which allows gradual stress accumulation in the specimen, whilst maintaining the load at both ends of the specimen in an equilibrium state. The test results showed that the tensile strength of the granite under coupled loads decreases with increases in the static pre-stresses, which might lead to modifications of the blasting design or support design in deep underground projects. Furthermore, the failure patterns of specimens under coupled loads have been investigated.

  7. Dynamic testing : Assessing cognitive potential of children with culturally diverse backgrounds

    NARCIS (Netherlands)

    Stevenson, C.E.; Heiser, W.J.; Resing, W.C.M.

    Dynamic testing may be useful in assessing cognitive potential in disadvantaged populations such as ethnic minorities. Majority and minority culture children's performance on a dynamic test of figural matrices was examined using a pretest-training-posttest design. Dynamically tested children were

  8. Dynamic tensile test of single PET textile cables

    Directory of Open Access Journals (Sweden)

    Pasco F.

    2012-08-01

    Full Text Available The tyres conception involves for certain applications, the use of textile cables as reinforcement. During its use, the tyre undergoes temperatures variations and dynamic loading rates. The consideration of these conditions during the numeric simulations requires the knowledge of the sensitivity of the mechanical behaviour to loading rate and temperature. In this paper, we developed an experimental methodology for testing textile cable up to high strain rate. The main difficulty of testing cables is the optimization of cable fixing on the machine. For that purpose, we adapted the solution of fixing by progressive binding already used in quasi-static, while taking into account constraints inherent to high strain tests. Firstly, the mass of grips was decreased in order to get force signal less sensitive to grips inertia. The method was developed on a high speed hydraulic machine equipped with a thermal enclosure. The investigated temperatures and strain rates range from room temperature to 373 ∘K (100 ∘C and from 0,01 to 100/s, respectively. In addition, the hydraulic machine was equipped with a high speed video camera. The obtained images were analysed by a tracking technique to measure the average strain in the cable (from 50 to 20000 f/s.

  9. Dynamic Quantitative Sensory Testing to Characterize Central Pain Processing

    Science.gov (United States)

    Mackey, Ian G.; Dixon, Eric A.; Johnson, Kevin; Kong, Jiang-Ti

    2017-01-01

    Central facilitation and modulation of incoming nociceptive signals play an important role in the perception of pain. Disruption in central pain processing is present in many chronic pain conditions and can influence responses to specific therapies. Thus, the ability to precisely describe the state of central pain processing has profound clinical significance in both prognosis and prediction. Because it is not practical to record neuronal firings directly in the human spinal cord, surrogate behavior tests become an important tool to assess the state of central pain processing. Dynamic QST is one such test, and can probe both the ascending facilitation and descending modulation of incoming nociceptive signals via TS and CPM, respectively. Due to the large between-individual variability in the sensitivity to noxious signals, standardized TS and CPM tests may not yield any meaningful data in up to 50% of the population due to floor or ceiling effects. We present methodologies to individualize TS and CPM so we can capture these measures in a broader range of individuals than previously possible. We have used these methods successfully in several studies at the lab, and data from one ongoing study will be presented to demonstrate feasibility and potential applications of the methods. PMID:28287532

  10. Scoping Future Policy Dynamics in Raw Materials Through Scenarios Testing

    Science.gov (United States)

    Correia, Vitor; Keane, Christopher; Sturm, Flavius; Schimpf, Sven; Bodo, Balazs

    2017-04-01

    The International Raw Materials Observatory (INTRAW) project is working towards a sustainable future for the European Union in access to raw materials, from an availability, economical, and environmental framework. One of the major exercises for the INTRAW project is the evaluation of potential future scenarios for 2050 to frame economic, research, and environmental policy towards a sustainable raw materials supply. The INTRAW consortium developed three possible future scenarios that encompass defined regimes of political, economic, and technological norms. The first scenario, "Unlimited Trade," reflects a world in which free trade continues to dominate the global political and economic environment, with expectations of a growing demand for raw materials from widely distributed global growth. The "National Walls" scenario reflects a world where nationalism and economic protectionism begins to dominate, leading to stagnating economic growth and uneven dynamics in raw materials supply and demand. The final scenario, "Sustainability Alliance," examines the dynamics of a global political and economic climate that is focused on environmental and economic sustainability, leading towards increasingly towards a circular raw materials economy. These scenarios were reviewed, tested, and provided simulations of impacts with members of the Consortium and a panel of global experts on international raw materials issues which led to expected end conditions for 2050. Given the current uncertainty in global politics, these scenarios are informative to identifying likely opportunities and crises. The details of these simulations and expected responses to the research demand, technology investments, and economic components of raw materials system will be discussed.

  11. Testing the local spacetime dynamics by heliospheric radiocommunication methods

    Directory of Open Access Journals (Sweden)

    H.-J. Fahr

    2008-05-01

    Full Text Available According to general relativistic theories, cosmological spacetime is dynamic. This prediction is in excellent agreement with the huge majority of astronomical observations on large cosmic scales, especially the observations of cosmological redshifts of distant galaxies. However, on scales of heliospheric distances, verifications of general relativistic effects are based on Schwarzschild metric tests or kinetical corrections, such as the perihelion motion of Mercury, photon deflection at the Sun and gravitational photon redshifts in central gravity fields. As we will show in this paper, there is, however, a chance to detect new cosmologically relevant features on heliospheric scales by careful study of photon propagations in the local spacetime metrics, based on red- or blueshifts as a clear, but up to now overlooked, signature of the local spacetime dynamics. Thus, we propose the challenging possibility of carrying out experiments of cosmological relevance by simply using high-precision radio tracking of heliospheric spaceprobes, as already practised in cases like Pioneer-10/11, Galileo and Ulysses.

  12. Dynamic load test of Arquin-designed CMU wall.

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard Pearson

    2010-02-01

    The Arquin Corporation has developed a new method of constructing CMU (concrete masonry unit) walls. This new method uses polymer spacers connected to steel wires that serve as reinforcing as well as a means of accurately placing the spacers so that the concrete block can be dry stacked. The hollows of the concrete block are then filled with grout. As part of a New Mexico Small Business Assistance Program (NMSBA), Sandia National Laboratories conducted a series of tests that dynamically loaded wall segments to compare the performance of walls constructed using the Arquin method to a more traditional method of constructing CMU walls. A total of four walls were built, two with traditional methods and two with the Arquin method. Two of the walls, one traditional and one Arquin, had every third cell filled with grout. The remaining two walls, one traditional and one Arquin, had every cell filled with grout. The walls were dynamically loaded with explosive forces. No significant difference was noted between the performance of the walls constructed by the Arquin method when compared to the walls constructed by the traditional method.

  13. Development of test methodology for dynamic mechanical analysis instrumentation

    Science.gov (United States)

    Allen, V. R.

    1982-08-01

    Dynamic mechanical analysis instrumentation was used for the development of specific test methodology in the determination of engineering parameters of selected materials, esp. plastics and elastomers, over a broad range of temperature with selected environment. The methodology for routine procedures was established with specific attention given to sample geometry, sample size, and mounting techniques. The basic software of the duPont 1090 thermal analyzer was used for data reduction which simplify the theoretical interpretation. Clamps were developed which allowed 'relative' damping during the cure cycle to be measured for the fiber-glass supported resin. The correlation of fracture energy 'toughness' (or impact strength) with the low temperature (glassy) relaxation responses for a 'rubber-modified' epoxy system was negative in result because the low-temperature dispersion mode (-80 C) of the modifier coincided with that of the epoxy matrix, making quantitative comparison unrealistic.

  14. Frequency control in power systems with high wind power penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tarnowski, German Claudio [Technical Univ. of Denmark (Denmark). Centre for Electric Technology; Vestas Wind Systems A/S, Alsve (Denmark); Kjaer, Philip Carne [Vestas Wind Systems A/S, Alsve (Denmark); Oestergaard, Jacob [Technical Univ. of Denmark (Denmark). Centre for Electric Technology; Soerensen, Poul E. [Risoe National Laboratory for Sustainable Energy, Roskilde (Denmark). Wind Energy Dept.

    2010-07-01

    The fluctuating nature of wind power introduces several challenges to reliable operation of power system. With high wind power penetration, conventional power plants are displaced and wind speed fluctuations introduce large power imbalances which lead to power system frequency control and operational problems. This paper analysis the impact of wind power in the frequency control of power systems for different amount of controllable variable speed wind turbines. Real measurements from short term wind power penetration tests in a power system are shown and used to study the amount of total regulating power needed from conventional power plants. Dynamic simulations with validated model of the power system support the studies. The paper also presents control concepts for wind power plants necessary to achieve characteristic of frequency response and active power balancing similarly to conventional power plants, therefore allowing higher wind power penetration. As the power system dependency on wind power increases, wind power generation has to contribute with dynamic response and control actions similarly to conventional power plants. (orig.)

  15. Locating a buried earth penetrator

    Energy Technology Data Exchange (ETDEWEB)

    Caffey, T.W.H.

    1977-11-01

    The purpose of this work was to assist the recovery of a buried earth penetrator by locating the vertical projection of the penetator upon the surface within a horizontal radius error of one meter. The penetrator will carry a small coil which is driven by an alternating current to form a magnetic dipole. Five measurements of the magnetic field vector upon the surface of the earth are shown to be sufficient for determining not only the xyz-coordinates of the dipole, but also the orientation of the dipole axis. The theory, computation process, and field tests are comprehensively described. Results of 26 field tests with the dipole at 9 different combinations of location and orientation are given. Average radial and vertical location errors are 0.27 m and -0.05 m, respectively, while the mean errors in the tilt and orientation angles of the dipole axis are 3 degrees and 8 degrees, respectively. The results are applied to the design of a locating system for a Pershing II penetrator which contains a recessed, rear-mounted coil.

  16. Percutaneous penetration studies for risk assessment

    DEFF Research Database (Denmark)

    Sartorelli, Vittorio; Andersen, Helle Raun; Angerer, Jürgen

    2000-01-01

    . In order to predict the systemic risk of dermally absorbed chemicals and to enable agencies to set safety standards, data is needed on the rates of percutaneous penetration of important chemicals. Standardization of in vitro tests and comparison of their results with the in vivo data could produce...... of percutaneous penetration. This paper is an outcome of the meetings of the Percutaneous Penetration Subgroup and reports the presentations on the key issues identified throughout the 3-year duration of the Dermal Exposure Network (1997-1999)....

  17. The GBT Dynamic Scheduling System: Development and Testing

    Science.gov (United States)

    McCarty, M.; Clark, M.; Marganian, P.; O'Neil, K.; Shelton, A.; Sessoms, E.

    2009-09-01

    During the summer trimester of 2008, all observations on the Robert C. Byrd Green Bank Telescope (GBT) were scheduled using the new Dynamic Scheduling System (DSS). Beta testing exercised the policies, algorithms, and software developed for the DSS project. Since observers are located all over the world, the DSS was implemented as a web application. Technologies such as iCalendar, Really Simple Syndication (RSS) feeds, email, and instant messaging are used to transfer as much or as little information to observers as they request. We discuss the software engineering challenges leading to our implementation such as information distribution and building rich user interfaces in the web browser. We also relate our adaptation of agile development practices to design and develop the DSS. Additionally, we describe handling differences in expected versus actual initial conditions in the pool of project proposals for the 08B trimester. We then identify lessons learned from beta testing and present statistics on how the DSS was used during the trimester.

  18. Design and testing of Ground Penetrating Radar equipment dedicated for civil engineering applications: ongoing activities in Working Group 1 of COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Manacorda, Guido; Persico, Raffaele

    2015-04-01

    This work aims at presenting the ongoing research activities carried out in Working Group 1 'Novel GPR instrumentation' of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' (www.GPRadar.eu). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Working Group 1 (WG1) of the Action focuses on the development of innovative GPR equipment dedicated for civil engineering applications. It includes three Projects. Project 1.1 is focused on the 'Design, realisation and optimisation of innovative GPR equipment for the monitoring of critical transport infrastructures and buildings, and for the sensing of underground utilities and voids.' Project 1.2 is concerned with the 'Development and definition of advanced testing, calibration and stability procedures and protocols, for GPR equipment.' Project 1.3 deals with the 'Design, modelling and optimisation of GPR antennas.' During the first year of the Action, WG1 Members coordinated between themselves to address the state of the art and open problems in the scientific fields identified by the above-mentioned Projects [1, 2]. In carrying our this work, the WG1 strongly benefited from the participation of IDS Ingegneria dei Sistemi, one of the biggest GPR manufacturers, as well as from the contribution of external experts as David J. Daniels and Erica Utsi, sharing with the Action Members their wide experience on GPR technology and methodology (First General Meeting, July 2013). The synergy with WG2 and WG4 of the Action was useful for a deep understanding of the problems, merits and limits of available GPR equipment, as well as to discuss how to quantify the reliability of GPR results. An

  19. 基于Kali-Linux渗透测试方法的研究与设计%Research and Design of the Penetration Test Method Based on Kali-Linux

    Institute of Scientific and Technical Information of China (English)

    姚莉; 林科辰; 邓丹君

    2016-01-01

    渗透测试是一种在获得用户或甲方单位授权的情况下,对用户信息系统或目标系统实施漏洞攻击的方法。目前所有渗透测试的技术体系理论工作都处于不断完善和更新中。通过分析黑客攻击行为的完整流程,本文提出一种基于Kali-Linux进行渗透测试的方法,以提高渗透测试效率和能力。本文总结了当前业内被接受程度较高的几大标准技术测试体系理论,通过使用Kali-Linux系统作为平台载体,说明一套完整的渗透测试的思路、流程、步骤和结果输出等为网络管理者提供参考。%The penetration test is a method to attack the user information system or the target system in the case of obtaining the authorization from the user or the ifrst-party organization.At present,all the technical systems of the penetration test are constantly improving and updating.By analyzing the complete process of hacking,this paper puts forward a penetration test method based on Kali-Linux to improve the efifciency and capacity of penetration test.Several standardized technical test systems with high acceptance level in the industry are adopted in the research.Using the Kali-Linux system as the platform,the paper introduces the whole set of design,lfow,procedures and result,providing some reference to network administrators.

  20. Physics of Armour penetration

    Directory of Open Access Journals (Sweden)

    Sampooran Singh

    1953-01-01

    Full Text Available When a “Shaped-Charge” projectile is spin-stabilized during its flight, its penetration is greatly reduced, hence such a projectile is fin-stabilized and consequently the range is less and accuracy is poor. Attempts are being made to combine the penetrating power of a bazooka, and range and accuracy of rifled weapon. Just as the introduction of fire-arms brought about the extinction of the armour knights because a bullet could easily penetrate the kind of armour that the knights could put on; similarly “Shaped-Charge” projectiles having the range and accuracy of a rifled weapon will seriously affect the tactical use of amour in the battle-field.

  1. Characteristics of dynamic triaxial testing of asphalt mixtures

    Science.gov (United States)

    Ulloa Calderon, Alvaro

    Due to the increasing traffic loads and tire pressures, a serious detrimental impact has occurred on flexible pavements in the form of excessive permanent deformation once the critical combination of loading and environmental conditions are reached. This distress, also known as rutting, leads to an increase in road roughness and ultimately jeopardizes the road users' safety. The flow number (FN) simple performance test for asphalt mixtures was one of the final three tests selected for further evaluation from the twenty-four test/material properties initially examined under the NCHRP 9-19 project. Currently, no standard triaxial testing conditions in terms of the magnitude of the deviator and confining stresses have been specified. In addition, a repeated haversine axial compressive load pulse of 0.1 second and a rest period of 0.9 second are commonly used as part of the triaxial testing conditions. The overall objective of this research was to define the loading conditions that created by a moving truck load in the hot mixed asphalt (HMA) layer. The loading conditions were defined in terms of the triaxial stress levels and the corresponding loading time. Dynamic mechanistic analysis with circular stress distribution was used to closely simulate field loading conditions. Extensive mechanistic analyses of three different asphalt pavement structures subjected to moving traffic loads at various speeds and under braking and non-braking conditions were conducted using the 3D-Move model. Prediction equations for estimating the anticipated deviator and confining stresses along with the equivalent deviator stress pulse duration as a function of pavement temperature, vehicle speed, and asphalt mixture's stiffness have been developed. The magnitude of deviator stress, sigmad and confining stress, sigmac, were determined by converting the stress tensor computed in the HMA layer at 2" below pavement surface under a moving 18-wheel truck using the octahedral normal and shear

  2. Session: Hard Rock Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tennyson, George P. Jr.; Dunn, James C.; Drumheller, Douglas S.; Glowka, David A.; Lysne, Peter

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of five presentations: ''Hard Rock Penetration - Summary'' by George P. Tennyson, Jr.; ''Overview - Hard Rock Penetration'' by James C. Dunn; ''An Overview of Acoustic Telemetry'' by Douglas S. Drumheller; ''Lost Circulation Technology Development Status'' by David A. Glowka; ''Downhole Memory-Logging Tools'' by Peter Lysne.

  3. Ground penetrating radar

    CERN Document Server

    Daniels, David J

    2004-01-01

    Ground-penetrating radar has come to public attention in recent criminal investigations, but has actually been a developing and maturing remote sensing field for some time. In the light of recent expansion of the technique to a wide range of applications, the need for an up-to-date reference has become pressing. This fully revised and expanded edition of the best-selling Surface-Penetrating Radar (IEE, 1996) presents, for the non-specialist user or engineer, all the key elements of this technique, which span several disciplines including electromagnetics, geophysics and signal processing. The

  4. Utilizing the Upcoming Gravity Measurements from Cassini's Proximal Orbits for Studying the Atmospheric Dynamics of Saturn - How Deep Do the Winds Penetrate?

    Science.gov (United States)

    Kaspi, Y.; Galanti, E.

    2014-12-01

    At the end of the Cassini mission, the spacecraft will descend into close-by proximal orbits around Saturn. During those proximal orbits, Cassini will obtain high precision gravity measurements of the planet. In this talk, we will discuss how this data can be used to estimate the depth of the observed flows on the planet. This can be done in several ways: 1. measurements of the high order even harmonics which beyond J10 are dominated by the dynamics; 2. measurements of odd gravity harmonics which have no contribution from a static planet, and therefore are a pure signature of dynamics; 3. upper limits on the depth can be obtained by comparing low order even harmonics from dynamical models to the difference between the measured low order even harmonics and the largest possible values of a static planet; 4. direct latitudinally varying measurements of the gravity field exerted on the spacecraft. We will discuss how these methods may be applied and show that given the expected sensitivity of Cassini the odd harmonics J3 and J5 will have the best sensitivity to deep dynamics, allowing detection of winds reaching only O(100km) deep, if those exist on Saturn. We use a hierarchy of dynamical models ranging from full 3D dynamical circulation models to simplified dynamical models where the sensitivity of the gravity field to the dynamics can be explored. In order to invert the gravity field to be measured by Cassini into the depth dependent circulation, an adjoint inverse model is constructed for the dynamical models, thus allowing backward integration of the dynamical model. This tool can be used for examination of various scenarios, including cases in which the depth of the wind depends on latitudinal position. In summary, we expect that the very end of Cassini's tour holds an opportunity for gravity measurements that may finally allow answering one of the long-lasting puzzles in planetary science regarding the depth of the zonal jets on the gas giants. In fact, as Juno

  5. Effect of Liquid Penetrant Sensitivity on Probability of Detection

    Science.gov (United States)

    Parker, Bradford H.

    2008-01-01

    The objective of the task is to investigate the effect of liquid penetrant sensitivity level on probability of crack detection (POD). NASA-STD-5009 currently requires the use of only sensitivity level 4 liquid penetrants. This requirement is based on the fact that the data generated in the NTIAC Nondestructive Evaluation (NDE) Capabilities Data Book was produced using only sensitivity level 4 penetrants. Many NDE contractors supporting NASA Centers routinely use sensitivity level 3 penetrants. Because of the new NASA-STD-5009 requirement, these contractors will have to either shift to sensitivity level 4 penetrants or perform formal POD demonstration tests to qualify their existing process.

  6. 3D Numerical Simulation of Projectile Penetration into Concrete Target

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Basing on the explicit instantaneous dynamics software MSC-Dytran and the general coupling arithmetic, the process of the projectile penetration into concrete target was simulated with the point-line-surface-body modeling method. Simulation results are in agreement with experimental results. The simulated data could provide design reference for the defense engineering construction and penetrator design.

  7. Tumor penetrating peptides

    Directory of Open Access Journals (Sweden)

    Tambet eTeesalu

    2013-08-01

    Full Text Available Tumor-homing peptides can be used to deliver drugs into tumors. Phage library screening in live mice has recently identified homing peptides that specifically recognize the endothelium of tumor vessels, extravasate, and penetrate deep into the extravascular tumor tissue. The prototypic peptide of this class, iRGD (CRGDKGPDC, contains the integrin-binding RGD motif. RGD mediates tumor homing through binding to αv integrins, which are selectively expressed on various cells in tumors, including tumor endothelial cells. The tumor-penetrating properties of iRGD are mediated by a second sequence motif, R/KXXR/K. This C-end Rule (or CendR motif is active only when the second basic residue is exposed at the C-terminus of the peptide. Proteolytic processing of iRGD in tumors activates the cryptic CendR motif, which then binds to neuropilin-1 activating an endocytic bulk transport pathway through tumor tissue. Phage screening has also yielded tumor-penetrating peptides that function like iRGD in activating the CendR pathway, but bind to a different primary receptor. Moreover, novel tumor-homing peptides can be constructed from tumor-homing motifs, CendR elements and protease cleavage sites. Pathologies other than tumors can be targeted with tissue-penetrating peptides, and the primary receptor can also be a vascular zip code of a normal tissue. The CendR technology provides a solution to a major problem in tumor therapy, poor penetration of drugs into tumors. The tumor-penetrating peptides are capable of taking a payload deep into tumor tissue in mice, and they also penetrate into human tumors ex vivo. Targeting with these peptides specifically increases the accumulation in tumors of a variety of drugs and contrast agents, such as doxorubicin, antibodies and nanoparticle-based compounds. Remarkably the drug to be targeted does not have to be coupled to the peptide; the bulk transport system activated by the peptide sweeps along any compound that is

  8. Characterization of nuclear reactor containment penetrations. Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Bump, T.R.; Seidensticker, R.W.; Shackelford, M.A.; Gambhir, V.K.; McLennan, G.L.

    1984-06-01

    This report summarizes the survey work conducted by Argonne National Laboratory on the design and details of major penetrations in 22 nuclear power plants. The survey includes all containment types and materials in current use. It also includes details of all types of penetrations (except for electrical penetration assemblies and valves) and the seals and gaskets used in them. The report provides a test matrix for testing major penetrations and for testing seals and gaskets in order to evaluate their leakage potential under severe accident conditions.

  9. Testing Record Dynamics in Experiments on Jammed Colloids

    DEFF Research Database (Denmark)

    Robe, Dominic M.; Boettcher, Stefan; Sibani, Paolo;

    2016-01-01

    When quenched rapidly beyond their glass transition, colloidal suspensions fall out of equilibrium. The pace of their dynamics then slows down with the system age, i.e., with the time elapsed after the quench. This breaking of time translational invariance is associated with dynamical observables...

  10. Ground-penetrating radar images of a dye tracer test within the unsaturated zone at the Susquehanna-Shale Hills CZO

    Science.gov (United States)

    Pitman, Lacey M.

    Dye tracer and time-lapse ground-penetrating radar (GPR) were used to image preferential flow paths in the shallow, unsaturated zone on hillslopes in two adjacent watersheds within the Susquehanna-Shale Hills Critical Zone Observatory (CZO). At each site we injected about 50 L of water mixed with brilliant blue dye (4 g/L) into a trench cut perpendicular to the slope (˜1.0 m long by ˜0.20 m wide by ˜0.20 m deep) to create a line of infiltration. GPR (800 MHz antennae with constant offset) was used to monitor the movement of the dye tracer downslope on a 1.0 m x 2.0 m grid with a 0.05 m line spacing. The site was then excavated and the stained pathways photographed to document the dye movement. We saw a considerable difference in the pattern of shallow preferential flow between the two sites despite similar soil characteristics and slope position. Both sites showed dye penetrating down to saprolite (˜0.40 m); however, lateral flow migration between the two sites was different. At the Missed Grouse field site, the lateral migration was ˜0.55 m as an evenly dispersed plume, but at distance of 0.70 m a finger of dye was observed. At the Shale Hills field site, the total lateral flow was ˜0.40 m, dye was barely visible until the excavation reached ˜0.10 m, and there was more evidence of distinct fingering in the vertical direction. Based on laboratory and field experiments as well as processing of the radargrams, the following conclusions were drawn: 1) time-lapse GPR successfully delineated the extent of lateral flow, but the GPR resolution was insufficient to detect small fingers of dye; 2) there was not a distinct GPR reflection at the regolith-saprock boundary, but this interface could be estimated from the extent of signal attenuation; 3) the preliminary soil moisture conditions may explain differences in the extent of infiltration at the two sites; 4) rapid infiltration into the underlying saprock limited the extent of shallow lateral flow at both sites and

  11. Subsurface investigation with ground penetrating radar

    Science.gov (United States)

    Ground penetrating radar (GPR) data was collected on a small test plot at the OTF/OSU Turfgrass Research & Education Facility in Columbus, Ohio. This test plot was built to USGA standards for a golf course green, with a constructed sand layer just beneath the surface overlying a gravel layer, that i...

  12. Dynamic PMU Compliance Test under C37.118.1aTM-2014

    DEFF Research Database (Denmark)

    Ghiga, Radu; Wu, Qiuwei; Martin, K.;

    2015-01-01

    This paper presents a flexible testing methodology and the dynamic compliance of PMUs as per the new C37.118.1a amendment published in 2014. The test platform consists of test signal generator, a Doble F6150 amplifier, PMUs under test, and a PMU test result analysis kit. The Doble amplifier is us...

  13. Impact and Penetration of Nanoparticle Suspension Drops into Porous Membranes

    Science.gov (United States)

    Sahu, Rakesh; Yarin, Alexander; Pourdeyhimi, Behnam

    2014-03-01

    The impacts and dynamic penetration of drops with suspended nanoparticles into porous membranes are studied experimentally and theoretically. This type of penetration is radically different from the wettability-driven imbibition. Two types of membranes are used in the experiments: (i) glass fiber filter membrane (wettable) and (ii) PTFE depth filter (non-wettable). The nanoparticle entrainment and deposition inside the membrane bulk is used to mostly visualize the ultimate penetration fronts of the carrier fluid by observing the cut cross-sections of the filter membranes, albeit also provides an insight into potentially new applications like circuit printing on nonwovens. The experimental results demonstrate that during the dynamic focusing responsible for water penetration into micro- and nanopores, water can penetrate into a non-wettable porous medium (PTFE). Water also penetrates by the same focusing mechanism into the wettable glass fiber membrane, where it additionally spreads on a much longer time scale due to the wettability-driven flow. A theory explaining dynamic penetration of liquid into porous medium after drop impact is proposed. It is used to explain and predict water penetration into the non-wettable media after drop impact, and the results are compared with the experimental data. The work was supported by the Nonwovens Cooperative Research Center (NCRC).

  14. Market penetration of biodiesel

    Directory of Open Access Journals (Sweden)

    Kenneth R. Szulczyk, Bruce A. McCarl

    2010-01-01

    Full Text Available This research examines in detail the technology and economics of substituting biodiesel for diesel #2. This endeavor examines three areas. First, the benefits of biodiesel are examined, and the technical problems of large-scale implementation. Second, the biodiesel production possibilities are examined for soybean oil, corn oil, tallow, and yellow grease, which are the largest sources of feedstocks for the United States. Examining in detail the production possibilities allows to identity the extent of technological change, production costs, byproducts, and greenhouse gas (GHG emissions. Finally, a U.S. agricultural model, FASOMGHG was used to predict market penetration of biodiesel, given technological progress, variety of technologies and feedstocks, market interactions, energy prices, and carbon dioxide equivalent prices. FASOMGHG has several interesting results. First, diesel fuel prices have an expansionary impact on the biodiesel industry. The higher the diesel fuel prices, the more biodiesel is produced. However, given the most favorable circumstances, the maximum biodiesel market penetration is 9% in 2030 with a wholesale diesel price of $4 per gallon. Second, the two dominant sources of biodiesel are from corn and soybeans. Sources like tallow and yellow grease are more limited, because they are byproducts of other industries. Third, GHG prices have an expansionary impact on the biodiesel prices, because biodiesel is quite GHG efficient. Finally, U.S. government subsidies on biofuels have an expansionary impact on biodiesel production, and increase market penetration at least an additional 3%.

  15. Market penetration of biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Szulczyk, Kenneth R. [Department of Economics, Orbita 3, Suleyman Demirel University, Almaty, 050043 (Kazakhstan); McCarl, Bruce A. [Department of Agricultural Economics, 2124 TAMU, Texas A& amp; M University, College Station, Texas, 77843 (United States)

    2010-07-01

    This research examines in detail the technology and economics of substituting biodiesel for diesel number 2. This endeavor examines three areas. First, the benefits of biodiesel are examined, and the technical problems of large-scale implementation. Second, the biodiesel production possibilities are examined for soybean oil, corn oil, tallow, and yellow grease, which are the largest sources of feedstocks for the United States. Examining in detail the production possibilities allows to identity the extent of technological change, production costs, byproducts, and greenhouse gas (GHG) emissions. Finally, a U.S. agricultural model, FASOMGHG was used to predict market penetration of biodiesel, given technological progress, variety of technologies and feedstocks, market interactions, energy prices, and carbon dioxide equivalent prices. FASOMGHG has several interesting results. First, diesel fuel prices have an expansionary impact on the biodiesel industry. The higher the diesel fuel prices, the more biodiesel is produced. However, given the most favorable circumstances, the maximum biodiesel market penetration is 9% in 2030 with a wholesale diesel price of $4 per gallon. Second, the two dominant sources of biodiesel are from corn and soybeans. Sources like tallow and yellow grease are more limited, because they are byproducts of other industries. Third, GHG prices have an expansionary impact on the biodiesel prices, because biodiesel is quite GHG efficient. Finally, U.S. government subsidies on biofuels have an expansionary impact on biodiesel production, and increase market penetration at least an additional 3%.

  16. Dynamic rock tests using split Hopkinson (Kolsky) bar system e A review

    Institute of Scientific and Technical Information of China (English)

    Kaiwen Xia; Wei Yao

    2015-01-01

    Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsky bar systems, which include both split Hopkinson pressure bar (SHPB) and split Hopkinson tension bar (SHTB) systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of tech-niques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB (i.e. pulse shaping, momentum-trap and multi-axial loading techniques). Various measurement techniques for rock tests in SHPB (i.e. X-ray micro computed tomography (CT), laser gap gauge (LGG), digital image corre-lation (DIC), Moiré method, caustics method, photoelastic coating method, dynamic infrared thermog-raphy) are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements (i.e. dynamic compression, tension, bending and shear tests), dynamic fracture measurements (i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity), and dy-namic techniques for studying the influences of temperature and pore water.

  17. Dynamic rock tests using split Hopkinson (Kolsky bar system – A review

    Directory of Open Access Journals (Sweden)

    Kaiwen Xia

    2015-02-01

    Full Text Available Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsky bar systems, which include both split Hopkinson pressure bar (SHPB and split Hopkinson tension bar (SHTB systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of techniques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB (i.e. pulse shaping, momentum-trap and multi-axial loading techniques. Various measurement techniques for rock tests in SHPB (i.e. X-ray micro computed tomography (CT, laser gap gauge (LGG, digital image correlation (DIC, Moiré method, caustics method, photoelastic coating method, dynamic infrared thermography are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements (i.e. dynamic compression, tension, bending and shear tests, dynamic fracture measurements (i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity, and dynamic techniques for studying the influences of temperature and pore water.

  18. Measurement of Dynamic Viscoelasticity of Full-Size Wood Composite Panels Using a Vibration Testing Method

    Science.gov (United States)

    Cheng Guan; Houjiang Zhang; John F. Hunt; Lujing Zhou; Dan Feng

    2016-01-01

    The dynamic viscoelasticity of full-size wood composite panels (WCPs) under the free-free vibrational state were determined by a vibration testing method. Vibration detection tests were performed on 194 pieces of three types of full-size WCPs (particleboard, medium density fiberboard, and plywood (PW)). The dynamic viscoelasticity from smaller specimens cut from the...

  19. Dynamic Testing : Measuring Inductive Reasoning in Children With Developmental Disabilities and Mild Cognitive Impairments

    NARCIS (Netherlands)

    Stevenson, C.E.; Resing, W.C.M.; Bosma, T.

    2012-01-01

    The main aim of this study was to evaluate the use of dynamic testing based on a graduated prompts techniques training in a clinical educational setting. We examined the question of whether it would be possible to administer a four session dynamic test to a specific group of children with complex

  20. Testing Object-Oriented Programs using Dynamic Aspects and Non-Determinism

    DEFF Research Database (Denmark)

    Achenbach, Michael; Ostermann, Klaus

    2010-01-01

    without parameterization or generation of tests. It also eases modelling naturally non-deterministic program features like IO or multi-threading in integration tests. Dynamic AOP facilitates powerful design adaptations without exposing test features, keeping the scope of these adaptations local to each...... test. We also combine non-determinism and dynamic aspects in a new approach to testing multi-threaded programs using co-routines.......The implementation of unit tests with mock objects and stubs often involves substantial manual work. Stubbed methods return simple default values, therefore variations of these values require separate test cases. The integration of mock objects often requires more infrastructure code and design...

  1. Distinguish Dynamic Basic Blocks by Structural Statistical Testing

    DEFF Research Database (Denmark)

    Petit, Matthieu; Gotlieb, Arnaud

    Statistical testing aims at generating random test data that respect selected probabilistic properties. A distribution probability is associated with the program input space in order to achieve statistical test purpose: to test the most frequent usage of software or to maximize the probability...... of satisfying a structural coverage criterion for instance. In this paper, we propose a new statistical testing method that generates sequences of random test data that respect the following probabilistic properties: 1) each sequence guarantees the uniform selection of feasible paths only and 2) the uniform...... control flow path) during the test data selection. We implemented this algorithm in a statistical test data generator for Java programs. A first experimental validation is presented...

  2. Use and interpretation of the dynamic cone penetrometer (DCP) test

    CSIR Research Space (South Africa)

    Paige-Green

    2009-09-01

    Full Text Available During the early 1930's the California Bearing Ratio test (CBR) was developed for the testing of material strength in the laboratory for the design of pavements. The test involves the compaction of a potential road-building material into a standard...

  3. Air Force Dynamic Mechanical Analysis Testing of NATO Round Robin Propellant Testing for Development of AOP-4717

    Science.gov (United States)

    2015-08-01

    Instruments Q800 Dynamic Mechanical Analyzer. The instrument is installed on a vibration-isolation table made of concrete and with four rubber vibration...The test sequence was modified so that the GCA would fill up at the start and also so that it would refill in mid-test if necessary. We found out

  4. Testing modified Newtonian dynamics in the Milky Way

    NARCIS (Netherlands)

    Iocco, F.; Pato, M.; Bertone, G.

    2015-01-01

    Modified Newtonian dynamics (MOND) is an empirical theory originally proposed to explain the rotation curves of spiral galaxies by modifying the gravitational acceleration, rather than by invoking dark matter. Here, we set constraints on MOND using an up-to-date compilation of kinematic tracers of

  5. Modeling Asteroid Dynamics using AMUSE: First Test Cases

    NARCIS (Netherlands)

    Frantseva, Kateryna; Mueller, Michael; van der Tak, Floris; Helmich, Frank P.

    2015-01-01

    We are creating a dynamic model of the current asteroid population. The goal is to reproduce measured impact rates in the current Solar System, from which we'll derive delivery rates of water and organic material by tracing low-albedo C-class asteroids (using the measured albedo distribution from WI

  6. Modeling Asteroid Dynamics using AMUSE: First Test Cases

    NARCIS (Netherlands)

    Frantseva, Kateryna; Mueller, Michael; van der Tak, Floris; Helmich, Frank P.

    2015-01-01

    We are creating a dynamic model of the current asteroid population. The goal is to reproduce measured impact rates in the current Solar System, from which we'll derive delivery rates of water and organic material by tracing low-albedo C-class asteroids (using the measured albedo distribution from

  7. Modeling Asteroid Dynamics using AMUSE: First Test Cases

    NARCIS (Netherlands)

    Frantseva, Kateryna; Mueller, Michael; van der Tak, Floris; Helmich, Frank P.

    2015-01-01

    We are creating a dynamic model of the current asteroid population. The goal is to reproduce measured impact rates in the current Solar System, from which we'll derive delivery rates of water and organic material by tracing low-albedo C-class asteroids (using the measured albedo distribution from WI

  8. Spreading on and penetration into thin, permeable print media: application to ink-jet printing.

    Science.gov (United States)

    Daniel, Richard C; Berg, John C

    2006-11-16

    This paper examines spreading and penetration of surfactant-laden drops on thin-permeable media with reference to ink-jet printing. A detailed review of the interaction of both pure liquids and surfactant containing solutions with porous substrates is given for individual spreading and penetration and for the combined processes. A new model based on energy arguments is derived and compared to current hydrodynamic equations used to describe simultaneous spreading and penetration. Three studies of how surfactant solutions interact with thin commercial ink-jet photographic quality papers are presented. Here, two relevant systems are examined: Tergitol 15-S-5 and 1,2-octanediol. The first study examines the spreading and penetration profiles for surfactant solutions over a range of concentrations spanning their critical micelle concentration. As expected, these profiles depend on the concentration of surfactant and the chemistry of the medium with which it interacts. In many cases, partial vertical penetration of the region directly beneath the drop dominates at low interaction times and will be significant in ink-jet applications. The second study consists of a parametric investigation of the energy-based model derived herein. It shows that the model can capture all of the behaviors observed in the first study. In the final study, the ability of the energy-based model to fully predict the spreading behavior of Tergitol 15-S-5 solutions is tested. It is found that the model produces good quantitative agreement at the highest concentrations and, as such, will be useful in screening spreading dynamics concentrated systems like ink-jet inks. Agreement at low to intermediate concentrations is often limited by finite induction periods prior to significant spreading and penetration. Possible corrections that could improve the agreement for weakly concentrated solutions are discussed, and directions for future studies of simultaneous spreading and penetration are proposed.

  9. Dynamics of wide binary stars: A case study for testing Newtonian dynamics in the low acceleration regime

    CERN Document Server

    Scarpa, Riccardo; Falomo, Renato; Treves, Aldo

    2016-01-01

    Extremely wide binary stars represent ideal systems to probe Newtonian dynamics in the low acceleration regimes (0.15 pc that are useful for the proposed test. While it would be premature to draw any conclusion about the validity of Newtonian dynamics at these low accelerations, our main result is that very wide binary stars seem to exist in the harsh environment of the solar neighborhood. This could provide a tool to test Newtonian dynamics versus modified dynamics theories in the low acceleration conditions typical of galaxies. In the near future the GAIA satellite will provide data to increase significantly the number of wide pairs that, with the appropriate follow up spectroscopic observations, will allow the implementation of this experiment with unprecedented accuracy.

  10. Standard practice for liquid penetrant examination for general industry

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice covers procedures for penetrant examination of materials. Penetrant testing is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, shrinkage, laminations, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance testing. It can be effectively used in the examination of nonporous, metallic materials, ferrous and nonferrous metals, and of nonmetallic materials such as nonporous glazed or fully densified ceramics, as well as certain nonporous plastics, and glass. 1.2 This practice also provides a reference: 1.2.1 By which a liquid penetrant examination process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications and procedures dealing with the liquid penetrant testing of parts and materials. Agreement by the customer requesting penetrant inspection is strongly rec...

  11. The Influence of Workpiece Surface State on Penetration Test and Countermeasures%工件表面状态对渗透检测的影响及对策

    Institute of Scientific and Technical Information of China (English)

    杨波; 胡学知; 龚固; 袁黎明

    2016-01-01

    简述了良好、不良表面状态的实质内容,论述了工件表面状态对渗透检测的影响;介绍了改善各种不良表面状态的对策,并提出了选择具体方法的原则,以供同行参考。%This paper briefly described the substance of good and bad surface state,discussed the influence of the bad surface state on penetration testing.It comprehensively introduced the countermeasures to improve the bad surface state and the principles of choosing some specific methods.What described in the paper may provide reference for others.

  12. Extensive Test of an SU(3)-based Partial Dynamical Symmetry

    Science.gov (United States)

    Casten, R. F.

    2014-09-01

    The concept of symmetries pervades much of our understanding of nature. In nuclear structure, the IBA embodies a framework with three dynamical symmetries U(5), O(6) and SU(3). Of course, most nuclei break these symmetries. Leviatan has discussed a concept of Partial Dynamical Symmetry (PDS) in which the states of the ground and gamma bands, only, are exactly described by SU(3) while all others are not. With an E2 operator which is not a generator of SU(3), this PDS gives a parameter-free description of γ to ground band relative B(E2) values in 168Er that is virtually identical to the best collective model (IBA) calculations with 2-3 parameters. We have carried out the first extensive study of this PDS, in 47 rare earth nuclei. Overall, the PDS works very well, and the deviations from the data are usually understandable in terms of specific kinds of mixing.

  13. Relativistic Radiation Magnetohydrodynamics in Dynamical Spacetimes: Numerical Methods and Tests

    OpenAIRE

    2008-01-01

    Many systems of current interest in relativistic astrophysics require a knowledge of radiative transfer in a magnetized gas flowing in a strongly-curved, dynamical spacetime. Such systems include coalescing compact binaries containing neutron stars or white dwarfs, disks around merging black holes, core collapse supernovae, collapsars, and gamma-ray burst sources. To model these phenomena, all of which involve general relativity, radiation (photon and/or neutrino), and magnetohydrodynamics, w...

  14. Testing the Goodwin growth-cycle macroeconomic dynamics in Brazil

    Science.gov (United States)

    Moura, N. J.; Ribeiro, Marcelo B.

    2013-05-01

    This paper discusses the empirical validity of Goodwin’s (1967) macroeconomic model of growth with cycles by assuming that the individual income distribution of the Brazilian society is described by the Gompertz-Pareto distribution (GPD). This is formed by the combination of the Gompertz curve, representing the overwhelming majority of the population (˜99%), with the Pareto power law, representing the tiny richest part (˜1%). In line with Goodwin’s original model, we identify the Gompertzian part with the workers and the Paretian component with the class of capitalists. Since the GPD parameters are obtained for each year and the Goodwin macroeconomics is a time evolving model, we use previously determined, and further extended here, Brazilian GPD parameters, as well as unemployment data, to study the time evolution of these quantities in Brazil from 1981 to 2009 by means of the Goodwin dynamics. This is done in the original Goodwin model and an extension advanced by Desai et al. (2006). As far as Brazilian data is concerned, our results show partial qualitative and quantitative agreement with both models in the studied time period, although the original one provides better data fit. Nevertheless, both models fall short of a good empirical agreement as they predict single center cycles which were not found in the data. We discuss the specific points where the Goodwin dynamics must be improved in order to provide a more realistic representation of the dynamics of economic systems.

  15. Unique Testing Capabilities of the NASA Langley Transonic Dynamics Tunnel, an Exercise in Aeroelastic Scaling

    Science.gov (United States)

    Ivanco, Thomas G.

    2013-01-01

    NASA Langley Research Center's Transonic Dynamics Tunnel (TDT) is the world's most capable aeroelastic test facility. Its large size, transonic speed range, variable pressure capability, and use of either air or R-134a heavy gas as a test medium enable unparalleled manipulation of flow-dependent scaling quantities. Matching these scaling quantities enables dynamic similitude of a full-scale vehicle with a sub-scale model, a requirement for proper characterization of any dynamic phenomenon, and many static elastic phenomena. Select scaling parameters are presented in order to quantify the scaling advantages of TDT and the consequence of testing in other facilities. In addition to dynamic testing, the TDT is uniquely well-suited for high risk testing or for those tests that require unusual model mount or support systems. Examples of recently conducted dynamic tests requiring unusual model support are presented. In addition to its unique dynamic test capabilities, the TDT is also evaluated in its capability to conduct aerodynamic performance tests as a result of its flow quality. Results of flow quality studies and a comparison to a many other transonic facilities are presented. Finally, the ability of the TDT to support future NASA research thrusts and likely vehicle designs is discussed.

  16. Test on dynamic characteristics of subgrade of heavy-haul railway in cold regions

    Institute of Scientific and Technical Information of China (English)

    YingYing Zhao; XianZhang Ling; ZiYu Wang; XinYan Shao; LiHui Tian; Lin Geng

    2015-01-01

    Dynamic characteristics of heavy-haul railway subgrade under vibratory loading in cold regions are investigated via low-temperature dynamic triaxial tests with multi-stage cyclic loading process. The relationship between dynamic shear stress and dynamic shear strain of frozen soil of subgrade under train loading and the influence of freezing temperatures on dynamic constitutive relation, dynamic shear modulus and damping ratio are observed in this study. Test results show that the dynamic constitutive relations of the frozen soils with different freezing temperatures comply with the hyperbolic model, in which model parameters a and b decrease with increasing freezing temperature. The dynamic shear modulus of the frozen soils decreases with increasing dynamic shear strains initially, followed by a relatively smooth attenuation tendency, whereas increases with decreasing freezing temperatures. The damping ratios decrease with decreasing freezing temperatures. Two linear functions are defined to express the linear relationships between dynamic shear modulus (damping ratio) and freezing temperature, respectively, in which corresponding linear coefficients are obtained through multiple regression analysis of test data.

  17. Does a dynamic test of phonological awareness predict early reading difficulties?

    DEFF Research Database (Denmark)

    Gellert, Anna Steenberg; Elbro, Carsten

    2015-01-01

    A few studies have indicated that dynamic measures of phonological awareness may contribute uniquely to the prediction of early reading development. However, standard control measures have been few and limited by floor effects, thus limiting their predictive value. The purpose of the present study...... was to examine the predictive value of a dynamic test of phonological awareness while controlling for both letter knowledge and standard phonological awareness using measures with no floor effect. We administered a dynamic test of phonological awareness along with traditional tests of phonological awareness...... and letter knowledge to 160 children in the fall of kindergarten. Reading outcomes were studied at three test points: at the end of kindergarten, in the first half of Grade 1, and at the end of Grade 1. The results indicated that the dynamic test of phonological awareness contributed significantly...

  18. Dissipation Assessments During Dynamic Very High Cycle Fatigue Tests

    OpenAIRE

    2015-01-01

    International audience; This paper presents an experimental device developed to detect and estimate dissipated energy during very high cycle fatigue tests (VHCF) at high loading frequency (20 kHz) and low stress (i.e. far below the yield stress). Intrinsic dissipation is computed using local expressions of the heat diffusion equation and thermal data fields provided by an infrared focal plane array camera. The results obtained from tests performed on pure copper specimens show that dissipated...

  19. Dynamic Brazilian Tests of Granite Under Coupled Static and Dynamic Loads

    OpenAIRE

    Zhou, Zilong; Li, Xibing; Zou, Yang; Jiang, Yihui; Li, Guonan

    2014-01-01

    Rocks in underground projects at great depth, which are under high static stresses, may be subjected to dynamic disturbance at the same time. In our previous work (Li et al. Int J Rock Mech Min Sci 45(5):739–748, 2008), the dynamic compressive behaviour of pre-stressed rocks was investigated using coupled-load equipment. The current work is devoted to the investigation of the dynamic tensile behaviour of granite rocks under coupled loads using the Brazilian disc (BD) method with the aid of a ...

  20. Structural Dynamics Testing of Advanced Stirling Convertor Components

    Science.gov (United States)

    Oriti, Salvatore M.; Williams, Zachary Douglas

    2013-01-01

    NASA Glenn Research Center has been supporting the development of Stirling energy conversion for use in space. Lockheed Martin has been contracted by the Department of Energy to design and fabricate flight-unit Advanced Stirling Radioisotope Generators, which utilize Sunpower, Inc., free-piston Advanced Stirling Convertors. The engineering unit generator has demonstrated conversion efficiency in excess of 20 percent, offering a significant improvement over existing radioisotope-fueled power systems. NASA Glenn has been supporting the development of this generator by developing the convertors through a technology development contract with Sunpower, and conducting research and experiments in a multitude of areas, such as high-temperature material properties, organics testing, and convertor-level extended operation. Since the generator must undergo launch, several launch simulation tests have also been performed at the convertor level. The standard test sequence for launch vibration exposure has consisted of workmanship and flight acceptance levels. Together, these exposures simulate what a flight convertor will experience. Recently, two supplementary tests were added to the launch vibration simulation activity. First was a vibration durability test of the convertor, intended to quantify the effect of vibration levels up to qualification level in both the lateral and axial directions. Second was qualification-level vibration of several heater heads with small oxide inclusions in the material. The goal of this test was to ascertain the effect of the inclusions on launch survivability to determine if the heater heads were suitable for flight.

  1. Establishing the reliability of test procedures in order to investigate the effect of penetrating trunk trauma and prolonged mechanical ventilation on the recovery of adult survivors

    Directory of Open Access Journals (Sweden)

    H. van Aswegen

    2007-02-01

    Full Text Available Gunshot wounds and/or stab wounds to the trunk are injuries commonly seen in South African hospitals. Such injuries often necessitate exploratory surgical intervention to identify and treat injuries to the internal organs. These patients are managed in the intensive care unit and often undergo prolonged mechanical ventilation with immobilization that often results in some degree of muscle dysfunction. In order to monitor the recovery of adult survivors over a 6-month period after hospital discharge, validation ofthe six-minute walk test and hand-held dynamometry between datacollectors was necessary.Methods: Data was collected for the six-minute walk test andhand-held dynamometry by three data collectors.  Subsequently a correlation coefficient (Pearson product momentcorrelate was calculated and one-way analysis of variance (ANOVA performed to assess the degree of associationbetween the data.Results and Discussion: A strong positive correlation existed for data collected on the 6-minute walk test betweendata collectors 1, 2 and 3 with r ranging from 0.71 to 1  (p < 0.025 to p < 0.0005. The intra-class correlation (ICCscores between data collectors ranged from 0.69 to 0.90 confirming this finding.  A weak to fair correlation existedbetween data collectors for dynamometry measurements of the triceps and quadriceps muscles. Intra-class correlationscores ranged from 0.11 to 0.71.Conclusion: A strongly positive inter-observer correlation existed for data sets for the six-minute walk test. A weakintra-observer correlation existed for data sets collected by data collectors for dynamometry however this improvedwith intervention. The degree of association between data sets for dynamometry should be assessed again during themain study.

  2. Using the Zeldovich dynamics to test expansion schemes

    CERN Document Server

    Valageas, Patrick

    2007-01-01

    We apply to the simple case of the Zeldovich dynamics various expansion schemes which may be used to study gravitational clustering. Using the well-known exact solution of the Zeldovich dynamics we can compare in details the predictions of these various perturbative methods with the exact non-linear result. We find that most systematic expansions fail to recover the decay of the response function into the highly non-linear regime. ``Linear methods'' lead to increasingly fast growth in the highly non-linear regime for higher orders, except for Pade approximants which give a bounded response at any order. ``Non-linear methods'' manage to obtain some damping at one-loop order but they fail at higher orders. We note that, although it recovers the exact Gaussian damping, a resummation performed in the high-k limit is not well justified as the generation of non-linear power does not originate from a finite range of wavenumbers (hence there is no simple separation of scales). No method is able to recover the relaxat...

  3. Sperm penetration assay and its correlation with semen analysis parameters

    Directory of Open Access Journals (Sweden)

    Laxmi Kant Pandey

    2015-11-01

    Full Text Available Background: Aim of current study was to determine whether the Sperm Penetration Assay (SPA can be used as a test to discriminate the infertile male from fertile one. We have also correlated the SPA with semen analysis. Methods: Sperm characteristics namely Semen analysis and the sperm penetration assay were tested in 44 infertile and 10 fertile men. Sperm penetration assay was determined by using zona free hamster eggs. Results: With decreasing spermatozoa concentration in the semen there was significant decrease in percentage penetration of zona free Hamster eggs (p0.05. Conclusions: The Sperm penetration assay could discriminate the infertile group from fertile group significantly (p<0.001. The test appeared to be highly reproducible and probably identifies a truly infertile male. [Int J Res Med Sci 2015; 3(11.000: 3197-3201

  4. Penetrance of Hypertrophic Cardiomyopathy in Children and Adolescents

    DEFF Research Database (Denmark)

    Jensen, Morten K; Havndrup, Ole; Christiansen, Michael;

    2013-01-01

    The penetrance of hypertrophic cardiomyopathy (HCM) during childhood and adolescence has been only sparsely described. We studied the penetrance of HCM and the short- and long-term outcomes of clinical screening and predictive genetic testing of child relatives of patients with HCM....

  5. 40 CFR 1065.376 - Chiller NO2 penetration.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Chiller NO2 penetration. 1065.376... CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o Measurements § 1065.376 Chiller NO2 penetration. (a) Scope and frequency. If you use a chiller to dry a sample upstream of a...

  6. The Next Generation of High-Speed Dynamic Stability Wind Tunnel Testing (Invited)

    Science.gov (United States)

    Tomek, Deborah M.; Sewall, William G.; Mason, Stan E.; Szchur, Bill W. A.

    2006-01-01

    Throughout industry, accurate measurement and modeling of dynamic derivative data at high-speed conditions has been an ongoing challenge. The expansion of flight envelopes and non-conventional vehicle design has greatly increased the demand for accurate prediction and modeling of vehicle dynamic behavior. With these issues in mind, NASA Langley Research Center (LaRC) embarked on the development and shakedown of a high-speed dynamic stability test technique that addresses the longstanding problem of accurately measuring dynamic derivatives outside the low-speed regime. The new test technique was built upon legacy technology, replacing an antiquated forced oscillation system, and greatly expanding the capabilities beyond classic forced oscillation testing at both low and high speeds. The modern system is capable of providing a snapshot of dynamic behavior over a periodic cycle for varying frequencies, not just a damping derivative term at a single frequency.

  7. Dynamic Test Case Design Scenario and analysis of Module Testing Using Manual vs. Automated Technique

    OpenAIRE

    Er. RAJENDER KUMAR; Dr. M.K.GUPTA

    2012-01-01

    Software can be tested either manually or automatically.The two approaches are complementary: automated testingcan perform a huge number of tests in short time or period,whereas manual testing uses the knowledge of the testingengineer to target testing to the parts of the system that areassumed to be more error-prone. Despite this contemporary,tools for manual and automatic testing are usually different,leading to decreased productivity and reliability of thetesting process. AutoTest is a tes...

  8. Finite Element Modeling of Transient Head Field Associated with Partially Penetrating, Slug Tests in a Heterogeneous Aquifer with Low Permeability, Stratigraphic Zones and Faults

    Science.gov (United States)

    Cheng, J.; Johnson, B.; Everett, M.

    2003-12-01

    Preliminary field work shows slug interference tests using an array of multilevel active and monitoring wells have potential of permitting enhanced aquifer characterization. Analysis of these test data, however, ultimately will rely on numerical geophysical inverse models. In order to gain insight as well as to provide synthetic data sets, we use a 3-D finite element analysis (code:FEHM-LANL) to explore the effect of idealized, low permeability, stratigraphical and structural (faults) heterogeneities on the transient head field associated with a slug test in a packer-isolated interval of an open borehole. The borehole and packers are modeled explicitly; wellbore storage is selected to match values of field tests. The homogeneous model exhibits excellent agreement with that of the semi-analytical model of Liu and Butler (1995). Models are axisymmetric with a centrally located slugged interval within a homogenous, isotropic, confined aquifer with embedded, horizontal or vertical zones of lower permeability that represent low permeability strata or faults, respectively. Either one or two horizontal layers are located opposite the borehole packers, which is a common situation at the field site; layer thickness (0.15-0.75 m), permeability contrast (up to 4 orders of magnitude contrast) and lateral continuity of layers are varied between models. The effect of a "hole" in a layer also is assessed. Fault models explore effects of thickness (0.05-0.75 m) and permeability contrast as well as additional effects associated with the offset of low permeability strata. Results of models are represented most clearly by contour maps of time of arrival and normalized amplitude of peak head perturbation, but transient head histories at selected locations provide additional insight. Synthesis of the models is on-going but a few points can be made at present. Spatial patterns are distinctive and allow easy discrimination between stratigraphic and structural impedance features. Time

  9. First tests of a Medipix-1 pixel detector for X-ray dynamic defectoscopy

    CERN Document Server

    Vavrik, D; Visschers, J; Pospísil, S; Ponchut, C; Zemankova, J

    2002-01-01

    Recent theoretical damage material models describe the dynamic development of voids and microcracks in materials under plastic deformation. For these models, experimental verification is needed. We propose direct and non-destructive observation of the propagation of material damage by measuring changes in transmission of X-rays penetrating a stressed material, using a photon-counting X-ray imager. The present contribution aims to demonstrate the applicability of silicon and gallium-arsenide devices for X-ray transmission measurements with a specimen of high-ductile aluminium alloy under study. The first experiments to determine the resolution and the sensitivity of the proposed method with the Medipix-1 pixel detector are presented.

  10. Dynamic testing of young children with (severe) disabilities : Presentation as part of symposium: Dynamic testing in children – language and speech problems or developmental disorders

    NARCIS (Netherlands)

    Visser, Linda

    2015-01-01

    A main disadvantage of static tests is that they do not take into account differences between children in chances they have had to learn and develop. Dynamic assessment is a way to take into account these differences and assess which skills a child can learn in which speed and which support it needs

  11. Localizing Ground-Penetrating Radar

    Science.gov (United States)

    2014-11-01

    ing Ground-Penetrating Radar (LGPR) uses very high frequency (VHF) radar reflections of underground features to generate base- line maps and then...Innovative ground- penetrating radar that maps underground geological features provides autonomous vehicles with real-time localization. Localizing...NOV 2014 2. REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Localizing Ground-Penetrating Radar 5a. CONTRACT NUMBER

  12. 16 CFR 1203.16 - Dynamic strength of retention system test.

    Science.gov (United States)

    2010-01-01

    ... represents the bone structure of the lower jaw. The entire dynamic test apparatus hangs freely on the... elongation of the retention system during the impact. A marker system or a displacement transducer, as shown...

  13. Numerical study of an arcan tensile compression shear test in dynamic: application to bonded joints

    OpenAIRE

    Valès, B.; Marguet, S.; Créac'hcadec, R.; Sohier, L; Ferrero, J-F.; Navarro, P.

    2015-01-01

    This paper presents a numerical study of the Arcan TCS testing device under dynamic conditions. This test is commonly used to characterize the mechanical behavior of bonded joints subjected to combined quasi-static loadings. In this study, the question of its extensibility to dynamic loadings by the use of an impactor guided in a drop tower is investigated. A dedicated finite element model is built under the plane stress assumption. Stress distributions in the adhesive are analysed trought ti...

  14. Test of Cable Products in Respect of Thermal and Dynamic Stability

    Directory of Open Access Journals (Sweden)

    M. A. Коrotkevich

    2010-01-01

    Full Text Available The paper considers conditions for selection of  power supply of the unit which is used for testing samples of cable products by thermal and dynamic stability currents. It has been shown that while conducting testing by thermal and dynamic stability currents at nominal cable voltage it is more justifiable to use a percussive energy accumulator, and in the case when the voltage is low an inductive energy accumulator is used.

  15. Testing for time-varying loadings in dynamic factor models

    DEFF Research Database (Denmark)

    Mikkelsen, Jakob Guldbæk

    factors. The squared correlation coefficient times the sample size has a limiting chi-squared distribution. The test can be made robust to serial correlation in the idiosyncratic errors. We find evidence for factor loadings variance in over half of the variables in a dataset for the US economy, while...... there is evidence of time-varying loadings on the risk factors underlying portfolio returns for around 80% of the portfolios....

  16. Penetrômetro de cone com taxa constante de penetração no solo: desenvolvimento e teste de funcionalidade Constant-rate cone penetrometer: development and functionality

    Directory of Open Access Journals (Sweden)

    Dalvan J. Reinert

    2007-04-01

    Full Text Available Penetrômetros auxiliam na determinação da capacidade de suporte do solo na engenharia civil e na avaliação da resistência mecânica de solos agrícolas, relacionando-a com compactação do solo e crescimento do sistema radicular das plantas. Este trabalho relata o desenvolvimento de um penetrômetro de cone com taxa constante de penetração, suas partes e funcionalidade, bem como resultados do uso na avaliação comparativa da compactação em experimentos e em lavoura. A quantificação da resistência é realizada com célula de carga, a distância de penetração no solo com potenciômetro, e a aquisição e o armazenamento de dados com placas eletrônicas. A concepção do equipamento, que emprega velocidade constante de penetração da haste no perfil do solo, possibilitou a aquisição de grande coleção de dados relativos com pequena variação de profundidade (5 mm, atingindo a profundidade máxima de 0,80 m. O equipamento é eficaz na aquisição e no tratamento de dados de resistência mecânica do solo à penetração em profundidade do perfil. A variação entre os pontos permite inferir sobre parâmetros e características do solo, bem como sobre o comportamento desses sob condições externas impostas, quer seja imediata, quer seja residual.Penetrometers are used to quantify soil bearing capacity in civil engineering and to evaluate mechanical resistance of agricultural soils, which is an indicator of soil compaction and of root growth. This paper reports the development, components and functionality of a constant-rate cone penetrometer, as well as its application to measure soil compaction. The force is measured by a load cell, the distance is measured by a potentiometer, and data acquisition and storage are performed by an electronic board. The equipment was tested in agricultural field transects with profile variability and experimental plots with compaction variability, generating soil penetration resistance information

  17. Practical application of RINO, a smartphone-based dynamic displacement sensing application for wind tunnel tests

    Science.gov (United States)

    Lee, Seung-Woo; Jeong, Jong-Hyun; Knez, Kyle P.; Min, Jae-Hong; Jo, Hongki

    2016-04-01

    Dynamic displacement is one of the most important measurands in wind tunnel tests of structures. Laser sensors or optical sensors are usually used in wind tunnel tests to measure displacements. However, these commercial sensors have limitations in its use, cost and installation despite of their good performance in accuracy. RINO (Real-time Image- processing for Non-contact monitoring), an iOS software application for dynamic displacement monitoring, has been developed in the previous study. In this study, feasibility of RINO in practical use for wind tunnel tests is explored. Series of wind tunnel tests show that performances of RINO are comparable with those of conventional displacement sensors.

  18. Measurements of SCRF cavity dynamic heat load in horizontal test system

    Energy Technology Data Exchange (ETDEWEB)

    DeGraff, B.D.; Bossert, R.J.; Pei, L.; Soyars, W.M.; /Fermilab

    2009-11-01

    The Horizontal Test System (HTS) at Fermilab is currently testing fully assembled, dressed superconducting radio frequency (SCRF) cavities. These cavities are cooled in a bath of superfluid helium at 1.8K. Dissipated RF power from the cavities is a dynamic heat load on the cryogenic system. The magnitude of heat flux from these cavities into the helium is also an important variable for understanding cavity performance. Methods and hardware used to measure this dynamic heat load are presented. Results are presented from several cavity tests and testing accuracy is discussed.

  19. Development of structural health monitoring techniques using dynamics testing

    Energy Technology Data Exchange (ETDEWEB)

    James, G.H. III [Sandia National Labs., Albuquerque, NM (United States). Experimental Structural Dynamics Dept.

    1996-03-01

    Today`s society depends upon many structures (such as aircraft, bridges, wind turbines, offshore platforms, buildings, and nuclear weapons) which are nearing the end of their design lifetime. Since these structures cannot be economically replaced, techniques for structural health monitoring must be developed and implemented. Modal and structural dynamics measurements hold promise for the global non-destructive inspection of a variety of structures since surface measurements of a vibrating structure can provide information about the health of the internal members without costly (or impossible) dismantling of the structure. In order to develop structural health monitoring for application to operational structures, developments in four areas have been undertaken within this project: operational evaluation, diagnostic measurements, information condensation, and damage identification. The developments in each of these four aspects of structural health monitoring have been exercised on a broad range of experimental data. This experimental data has been extracted from structures from several application areas which include aging aircraft, wind energy, aging bridges, offshore structures, structural supports, and mechanical parts. As a result of these advances, Sandia National Laboratories is in a position to perform further advanced development, operational implementation, and technical consulting for a broad class of the nation`s aging infrastructure problems.

  20. 两相流有限穿越可视图演化动力学研究*%Limited penetrable visibility graph from two-phase flow for investigating flow pattern dynamics*

    Institute of Scientific and Technical Information of China (English)

    高忠科; 胡沥丹; 周婷婷; 金宁德†

    2013-01-01

      针对小管径两相流流动特性,全新优化设计弧形对壁式电导传感器。通过动态实验在获取传感器测量信号的基础上,采用有限穿越可视图理论构建对应于不同流型的两相流复杂网络。通过分析发现,有限穿越可视图网络异速生长指数和网络平均度值的联合分布可实现对小管径两相流的流型辨识;有限穿越可视图度分布曲线峰值可有效刻画与泡径大小分布相关的流动物理结构细节特征;网络平均度值可表征流动结构的宏观特性;网络异速生长指数对流体动力学复杂性十分敏感,可揭示不同流型演化过程中的细节演化动力学特性。两相流测量信号的有限穿越可视图分析为揭示两相流流型的形成及演化动力学机理提供了新途径。%We optimize and design a new half-ring conductance sensor for measuring two-phase flow in a small diameter pipe. Based on the experimental signals measured from the designed sensor, we using the limited penetrable visibility graph we proposed construct complex networks for different flow patterns. Through analyzing the constructed networks, we find that the joint distribution of the allometric scaling exponent and the average degree of the network allows distinguishing different gas-liquid flow patterns in a small diameter pipe. The curve peak of the degree distribution allows uncovering the detailed features of the flow structure associated with the size of gas bubbles, the average degree of the network can reflect the macroscopic property of the flow behavior, The allometric scaling exponent is very sensitive to the complexity of fluid dynamics and allows characterizing the dynamic behaviors in the evolution of different flow patterns. In this regard, limited penetrable visibility graph analysis of fluid signals can provide a new perspective and a novel tool for uncovering the dynamical mechanisms governing the formation and evolution of

  1. Effect of Liquid Penetrant Sensitivity on Probability of Detection

    Science.gov (United States)

    Parker, Bradford H.

    2011-01-01

    The objective of the task is to investigate the effect of liquid penetrant sensitivity level on probability of detection (POD) of cracks in various metals. NASA-STD-5009 currently requires the use of only sensitivity level 4 liquid penetrants for NASA Standard Level inspections. This requirement is based on the fact that the data used to establish the reliably detectable flaw sizes penetrant inspection was from studies performed in the 1970s using penetrant deemed to be equivalent only to modern day sensitivity level 4 penetrants. However, many NDE contractors supporting NASA Centers routinely use sensitivity level 3 penetrants. Because of the new NASA-STD-5009 requirement, these contractors will have to either shift to sensitivity level 4 penetrants or perform formal POD demonstration tests to qualify their existing process. We propose a study to compare the POD generated for two penetrant manufactures, Sherwin and Magnaflux, and for the two most common penetrant inspection methods, water washable and post emulsifiable, hydrophilic. NDE vendors local to GSFC will be employed. A total of six inspectors will inspect a set of crack panels with a broad range of fatigue crack sizes. Each inspector will perform eight inspections of the panel set using the combination of methods and sensitivity levels described above. At least one inspector will also perform multiple inspections using a fixed technique to investigate repeatability. The hit/miss data sets will be evaluated using both the NASA generated DOEPOD software and the MIL-STD-1823 software.

  2. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions.

    Science.gov (United States)

    Zhang, Rui; Schweizer, Kenneth S

    2015-10-14

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  3. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions

    Science.gov (United States)

    Zhang, Rui; Schweizer, Kenneth S.

    2015-10-01

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  4. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Rui; Schweizer, Kenneth S., E-mail: kschweiz@illinois.edu [Department of Materials Science and Frederick Seitz Materials Research Laboratory, University of Illinois, 1304 West Green Street, Urbana, Illinois 61801 (United States)

    2015-10-14

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  5. Dynamic GnRH- and hCG-testing

    DEFF Research Database (Denmark)

    Bang, A Kirstine; Nordkap, Loa; Almstrup, Kristian

    2017-01-01

    was illustrated by results from 45 patients suspected of disordered hypothalamic-pituitary-gonadal axis. 3. METHODS: Baseline, stimulated, relative and absolute changes in serum FSH and LH were determined by ultrasensitive TRIFMA, and testosterone was determined by LC-MS/MS. 4. RESULTS: For the reference group LH...... insufficiency, compared to the relative increase. 5. CONCLUSIONS: We provide novel reference ranges for GnRH and hCG test in healthy men, which allows future diagnostic evaluation of hypothalamic-pituitary-gonadal disorders in men....

  6. Gas Dynamic Spray Technology Demonstration Project Management. Joint Test Report

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are sUbject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by Air Force Space Command (AFSPC) and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GOS) technology (also known as Cold Spray) was evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GOS coatings also have no VOCs and are environmentally preferable coatings. The primary objective of this effort was to demonstrate GDS technology as a repair method for TSCs. The aim was that successful completion of this project would result in approval of GDS technology as a repair method for TSCs at AFSPC and NASA installations to improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination, and reduce the amount of hazardous waste generated.

  7. Remote collaborative pseudo-dynamic testing system based on acquisition board control

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper,NetSLab network platform for remote collaborative pseudo-dynamic testing,which was developed recently by a research group led by the Hunan University,is presented.Aiming at MTS system which is widely used in structural tesring.the control method with acquisition board Was investigated in this study to realize the communication interface between NetSLab and MTS system,and open up the remote collaborative pseudo-dynamic testing system.Using the developed testing system,a collaborative pseudo-dynamic testing on LAN was carried out successfully.The result manifests that the data transmission and collaborative control can be implemented accurately between NetSLab and MTS system,so that the usability of the testing system is validated.

  8. Assessment of RAMONA-3B methodology with FRIGG dynamic tests

    Energy Technology Data Exchange (ETDEWEB)

    Rohatgi, U.S.; Neymotin, L.Y.; Wulff, W.

    1990-12-31

    The computer codes used at Brookhaven National Laboratory to compute BWR safety parameters are the Engineering Plant Analyzer (EPA) and RAMONA-3B/MOD1. Both codes have the same methodology for modeling thermal hydraulic phenomena: drift-flux formulation, two-phase multipliers for the wall friction and form losses calculations, and the momentum integral approach for spatial integration of the loop momentum equations. Both codes use explicit integration methods for solving ordinary differential equations. It is concluded that both the codes are capable of modelling the instability problems for a BWR. The accuracy of thermohydraulics codes predictions was assessed by modelling oscillatory FRIGG tests. Nodalizations studies showed that 24 axial nodes were sufficient for a converged solution, 12 axial nodes produced an error of 4.4% in the gain of the power to flow transfer function. The code predicted consistently the effects of power and inlet subcooling on gain and system resonance frequency. The comparisons showed that the code predicted the peak gains with a mean difference from experiments of 7% {plus_minus} 30% for all the tests modeled. The uncertainty in the experimental data is {minus}11% to +12%. The mean difference in the predicted frequency at the peak gain is {minus}6% {plus_minus} 14%.

  9. Assessment of RAMONA-3B methodology with FRIGG dynamic tests

    Energy Technology Data Exchange (ETDEWEB)

    Rohatgi, U.S.; Neymotin, L.Y.; Wulff, W.

    1990-01-01

    The computer codes used at Brookhaven National Laboratory to compute BWR safety parameters are the Engineering Plant Analyzer (EPA) and RAMONA-3B/MOD1. Both codes have the same methodology for modeling thermal hydraulic phenomena: drift-flux formulation, two-phase multipliers for the wall friction and form losses calculations, and the momentum integral approach for spatial integration of the loop momentum equations. Both codes use explicit integration methods for solving ordinary differential equations. It is concluded that both the codes are capable of modelling the instability problems for a BWR. The accuracy of thermohydraulics codes predictions was assessed by modelling oscillatory FRIGG tests. Nodalizations studies showed that 24 axial nodes were sufficient for a converged solution, 12 axial nodes produced an error of 4.4% in the gain of the power to flow transfer function. The code predicted consistently the effects of power and inlet subcooling on gain and system resonance frequency. The comparisons showed that the code predicted the peak gains with a mean difference from experiments of 7% {plus minus} 30% for all the tests modeled. The uncertainty in the experimental data is {minus}11% to +12%. The mean difference in the predicted frequency at the peak gain is {minus}6% {plus minus} 14%.

  10. High Speed Pressure Sensitive Paint for Dynamic Testing

    Science.gov (United States)

    Pena, Carolina; Chism, Kyle; Hubner, Paul

    2016-11-01

    Pressure sensitive paint (PSP) allows engineers to obtain accurate, high-spatial-resolution measurements of pressure fields over a structure. The pressure is directly related to the luminescence emitted by the paint due to oxygen quenching. Fast PSP has a higher surface area due to its porosity compared to conventional PSP, which enables faster diffusion and measurements to be acquired three orders of magnitude faster than with conventional PSP. A fast time response is needed when testing vibrating structures due to fluid-structure interaction. The goal of this summer project was to set-up, test and analyze the pressure field of an impinging air jet on a vibrating cantilever beam using Fast PSP. Software routines were developed for the processing of the emission images, videos of a static beam coated with Fast PSP were acquired with the air jet on and off, and the intensities of these two cases were ratioed and calibrated to pressure. Going forward, unsteady pressures on a vibrating beam will be measured and presented. Eventually, the long-term goal is to integrate luminescent pressure and strain measurement techniques, simultaneously using Fast PSP and a luminescent photoelastic coating on vibrating structures. Funding from NSF REU site Grant EEC 1358991 is greatly appreciated.

  11. 贯入法与回弹法检测空斗墙砌体的适用性检验%Applicability verification of penetration method and rebound method testing row-lock cavity wall masonry

    Institute of Scientific and Technical Information of China (English)

    王卓琳

    2012-01-01

    In light of many row-lock cavity wall structures in villages and small towns of domestic Jiangnan region, the paper testifies the applica- bility of penetration method and rebound method for testifying the mortar of row-lock cavity wall and the masonry strength. Results show that pene- tration method is suitable to testify the mortar strength of row-lock cavity wall, and the testing position is good for avoiding cavity brick and lime joints. Rebound method is suitable to testify the clay strength of row-lock cavity wall masonry, and the testing position is good for avoiding cavity brick.%针对我国江南地区村镇较多的空斗墙结构,对贯入法和回弹法对空斗墙中砂浆和砌块强度检测的适用性进行了检验,结果表明,贯入法适用于空斗墙砌体砂浆强度的检测,检测位置宜避开斗砖和丁砖位置的灰缝,回弹法适用于空斗墙砌体粘土砖强度的检测,检测位置宜避开斗砖。

  12. A Bimorph Moment/Force Actuator for Dynamic Testing

    Directory of Open Access Journals (Sweden)

    Hou Xiaoyan

    2009-09-01

    Full Text Available This paper focuses on a novel bimorph actuator which can produce pure moment or pure force to structures under testing. Due to its unique construction, this actuator is only sensitive to one translational and one rotational degree of freedom (DOF, which can be further decoupled from each other through controlling the phase of the excitation voltage supplied to the actuator. To correlate the input electrical voltage with the output moment (or force, angular velocity, linear velocity, rotational (or translational conversion functions are defined and then numerically determined. Compared with conventional twin-shaker setup to generate moment, the bimorph actuator is simple, compact, light-weight, effective and cheap. When generating moment, the usually-existing unwanted force excitation is avoided. The working frequency range of the actuator is much wider and the loading effect is greatly reduced.

  13. Deliverable D4: Off line thermal and fluid dynamics test

    CERN Document Server

    K. Samec et al.

    Early on in the EURISOL-DS study the converter target was identified as a major component on the critical path to demonstrating the overall concept of such a facility; without the target the entire project would not be feasible. The very harsh environment under which a target is to operate under irradiation is best summed by its governing parameters listed in Table 1.Obtaining experimental proof of two independent target designs; one featuring a beam window, the other without, was therefore instrumental to proving a viable concept for the overall EURISOL facility. Considerable effort was expended on ensuring adequate testing of the designs for which all participants, in particular IPUL, devoted much time and effort.

  14. Joint Test Plan for Gas Dynamic Spray Technology Demonstration

    Science.gov (United States)

    Lewis, Pattie

    2008-01-01

    Air Force Space Command (AFSPC) and NASA have similar missions, facilities, and structures located in similar harsh environments. Both are responsible for a number of facilities/structures with metallic structural and non-structural components in highly and moderately corrosive environments. Regardless of the corrosivity of the environment, all metals require periodic maintenance activity to guard against the insidious effects of corrosion and thus ensure that structures meet or exceed design or performance life. The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are subject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by AFSPC and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GDS) technology (also known as Cold Spray) will be evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GDS coatings also have no VOCs and are environmentally preferable coatings. To achieve a condition suitable for the application of a coating system, including GDS coatings, the substrate must

  15. Failure Engineered Heavy Metal Penetrators

    Science.gov (United States)

    1992-12-01

    ARMY RESEARCH LABORATORY Failure Engineered Heavy Metal Penetrators, Phase I, SBIR ARL-CR-5· R. Cavalieri, W. Tiarn, and D. Nicholson prepared...REPORT DATE S. REPORT TYPE AND DATES COVERED December 1992 Final Report-1/1/92 - 7/31/92 4. TITLE AND SUBTITLE FAILURE ENGINEERED HEAVY METAL PENETRATORS

  16. Electromagnetic Field Penetration Studies

    Science.gov (United States)

    Deshpande, M.D.

    2000-01-01

    A numerical method is presented to determine electromagnetic shielding effectiveness of rectangular enclosure with apertures on its wall used for input and output connections, control panels, visual-access windows, ventilation panels, etc. Expressing EM fields in terms of cavity Green's function inside the enclosure and the free space Green's function outside the enclosure, integral equations with aperture tangential electric fields as unknown variables are obtained by enforcing the continuity of tangential electric and magnetic fields across the apertures. Using the Method of Moments, the integral equations are solved for unknown aperture fields. From these aperture fields, the EM field inside a rectangular enclosure due to external electromagnetic sources are determined. Numerical results on electric field shielding of a rectangular cavity with a thin rectangular slot obtained using the present method are compared with the results obtained using simple transmission line technique for code validation. The present technique is applied to determine field penetration inside a Boeing-757 by approximating its passenger cabin as a rectangular cavity filled with a homogeneous medium and its passenger windows by rectangular apertures. Preliminary results for, two windows, one on each side of fuselage were considered. Numerical results for Boeing-757 at frequencies 26 MHz, 171-175 MHz, and 428-432 MHz are presented.

  17. Top Sounder Ice Penetration

    Science.gov (United States)

    Porter, D. L.; Goemmer, S. A.; Sweeney, J. H.

    2014-12-01

    Ice draft measurements are made as part of normal operations for all US Navy submarines operating in the Arctic Ocean. The submarine ice draft data are unique in providing high resolution measurements over long transects of the ice covered ocean. The data has been used to document a multidecadal drop in ice thickness, and for validating and improving numerical sea-ice models. A submarine upward-looking sonar draft measurement is made by a sonar transducer mounted in the sail or deck of the submarine. An acoustic beam is transmitted upward through the water column, reflecting off the bottom of the sea ice and returning to the transducer. Ice thickness is estimated as the difference between the ship's depth (measured by pressure) and the acoustic range to the bottom of the ice estimated from the travel time of the sonar pulse. Digital recording systems can provide the return off the water-ice interface as well as returns that have penetrated the ice. Typically, only the first return from the ice hull is analyzed. Information regarding ice flow interstitial layers provides ice age information and may possibly be derived with the entire return signal. The approach being investigated is similar to that used in measuring bottom sediment layers and will involve measuring the echo level from the first interface, solving the reflection loss from that transmission, and employing reflection loss versus impedance mismatch to ascertain ice structure information.

  18. Testing the dynamics of B ->pi pi and constraints onalpha

    Energy Technology Data Exchange (ETDEWEB)

    Grossman, Yuval; Hocker, Andreas; Ligeti, Zoltan; Pirjol, Dan

    2005-07-07

    In charmless nonleptonic B decays to {pi}{pi} or {rho}{rho}, the ''color allowed'' and ''color suppressed'' tree amplitudes can be studied in a systematic expansion in {alpha}{sub s}(m{sub b}) and {Lambda}{sub QCD}/m{sub b}. At leading order in this expansion their relative strong phase vanishes. The implications of this prediction are obscured by penguin contributions. They propose to use this prediction to test the relative importance of the various penguin amplitudes using experimental data. The present B {yields} {pi}{pi} data suggest that there are large corrections to the heavy quark limit, which can be due to power corrections to the tree amplitudes, large up-penguin amplitude, or enhanced weak annihilation. Because the penguin contributions are smaller, the heavy quark limit is more consistent with the B {yields} {rho}{rho} data, and its implications may become important for the extraction of {alpha} from this mode in the future.

  19. Final report of fuel dynamics Test E7

    Energy Technology Data Exchange (ETDEWEB)

    Doerner, R.C.; Murphy, W.F.; Stanford, G.S.; Froehle, P.H.

    1977-04-01

    Test data from an in-pile failure experiment of high-power LMFBR-type fuel pins in a simulated $3/s transient-overpower (TOP) accident are reported and analyzed. Major conclusions are that (1) a series of cladding ruptures during the 100-ms period preceding fuel release injected small bursts of fission gas into the flow stream; (2) gas release influenced subsequent cladding melting and fuel release (there were no measurable FCI's (fuel-coolant interactions), and all fuel motion observed by the hodoscope was very slow); (3) the predominant postfailure fuel motion appears to be radial swelling that left a spongy fuel crust on the holder wall; (4) less than 4 to 6 percent of the fuel moved axially out of the original fuel zone, and most of this froze within a 10-cm region above the original top of the fuel zone to form the outlet blockage. An inlet blockage approximately 1 cm long was formed and consisted of large interconnected void regions. Both blockages began just beyond the ends of the fuel pellets.

  20. Does a Dynamic Test of Phonological Awareness Predict Early Reading Difficulties?

    Science.gov (United States)

    Gellert, Anna S; Elbro, Carsten

    A few studies have indicated that dynamic measures of phonological awareness may contribute uniquely to the prediction of early reading development. However, standard control measures have been few and limited by floor effects, thus limiting their predictive value. The purpose of the present study was to examine the predictive value of a dynamic test of phonological awareness while controlling for both letter knowledge and standard phonological awareness using measures with no floor effect. We administered a dynamic test of phonological awareness along with traditional tests of phonological awareness and letter knowledge to 160 children in the fall of kindergarten. Reading outcomes were studied at three test points: at the end of kindergarten, in the first half of Grade 1, and at the end of Grade 1. The results indicated that the dynamic test of phonological awareness contributed significantly to the prediction of children's reading development in kindergarten and the first half of Grade 1 after control for static phonological awareness and letter knowledge. However, the unique prediction value of the dynamic test of phonological awareness did not extend to the end of Grade 1.

  1. A Modified approach for calculating dynamic shear modulus of stiff specimens by resonant column tests

    Institute of Scientific and Technical Information of China (English)

    Yuan Xiaoming; Sun Jing; Sun Rui

    2006-01-01

    An error analysis of the dynamic shear modulus of stiff specimens from tests performed by a new resonant column device developed by the Institute of Engineering Mechanics, China was conducted. A modified approach for calculating the dynamic shear modulus of the stiff specimens is presented. The error formula of the tests was deduced and parameters that impact the accuracy of the test were identified. Using six steel specimens with known standard stiffness as a base, a revised dynamic shear modulus calculation for stiff specimens was formulated by comparing three of the models.The maximum error between the test results and the calculated results shown by curves from both the free-vibration and the resonant-vibration tests is less than 6%. The free-vibration and resonant-vibration tests for three types of stiff samples with a known modulus indicate that the maximum deviation between the actual and the tested value using the modified approach were less than 10%. As a result, the modified approach presented here is shown to be reliable and the new device can be used for testing dynamic shear modulus of any stiff materials at low shear strain levels

  2. Experimental Testing Procedures and Dynamic Model Validation for Vanadium Redox Flow Battery Storage System

    DEFF Research Database (Denmark)

    Baccino, Francesco; Marinelli, Mattia; Nørgård, Per Bromand

    2013-01-01

    The paper aims at characterizing the electrochemical and thermal parameters of a 15 kW/320 kWh vanadium redox flow battery (VRB) installed in the SYSLAB test facility of the DTU Risø Campus and experimentally validating the proposed dynamic model realized in Matlab-Simulink. The adopted testing...

  3. Initial results from the Solar Dynamic (SD) Ground Test Demonstration (GTD) project at NASA Lewis

    Science.gov (United States)

    Shaltens, Richard K.; Boyle, Robert V.

    1995-01-01

    A government/industry team designed, built, and tested a 2 kWe solar dynamic space power system in a large thermal/vacuum facility with a simulated sun at the NASA Lewis Research Center. The Lewis facility provides an accurate simulation of temperatures, high vacuum, and solar flux as encountered in low earth orbit. This paper reviews the goals and status of the Solar Dynamic (SD) Ground Test Demonstration (GTD) program and describes the initial testing, including both operational and performance data. This SD technology has the potential as a future power source for the International Space Station Alpha.

  4. Does a dynamic test of phonological awareness predict early reading difficulties?

    DEFF Research Database (Denmark)

    Gellert, Anna Steenberg; Elbro, Carsten

    2015-01-01

    and letter knowledge to 160 children in the fall of kindergarten. Reading outcomes were studied at three test points: at the end of kindergarten, in the first half of Grade 1, and at the end of Grade 1. The results indicated that the dynamic test of phonological awareness contributed significantly...... to the prediction of children’s reading development in kindergarten and the first half of Grade 1 after control for static phonological awareness and letter knowledge. However, the unique prediction value of the dynamic test of phonological awareness did not extend to the end of Grade 1....

  5. Dynamic Characteristics of a New Machine for Fatigue Testing of Railway Axles – Part 2

    Directory of Open Access Journals (Sweden)

    Karel FRYDRÝŠEK

    2012-06-01

    Full Text Available There were done some proposal calculations for a new testing machine. This new testing machine is determined for a dynamic fatigue testing of railway axles. The railway axles are subjected to bending and rotation (centrifugal effects. For the right proposition of a new machine is very important to know the basic dynamic characteristics of whole system. These dynamic characteristics are solved via FEM (MSC.Marc/Mentat software in combination with SBRA (Simulation-Based Reliability Assessment Method (probabilistic Monte Carlo approach, Anthill and Python software. The proposed dimensions and springs of a new machine for fatigue testing of railway axles were used for manufacturing. Application of the SBRA method connected with FEM in these areas is a new and innovative trend in mechanics. This paper is continuation of former work (i.e. easier deterministic approach already presented in this journal in 2007.

  6. A new Laplace transformation method for dynamic testing of solar collectors

    DEFF Research Database (Denmark)

    Kong, Weiqiang; Perers, Bengt; Fan, Jianhua;

    2015-01-01

    A new dynamic method for solar collector testing is developed. It is characterized by using the Laplace transformation technique to solve the differential governing equation. The new method was inspired by the so called New Dynamic Method (NDM) (Amer E. et al (1999) [1]) but totally different....... By integration of the Laplace transformation technique with the Quasi Dynamic Test (QDT) model (Fischer S. et al (2004) [2]), the Laplace – QDT (L-QDT) model is derived. Two experimental methods are then introduced. One is the shielding method which needs to shield and un-shield solar collector continuously...... and the natural experimental method. The identified collector parameters are then compared and analyzed with those obtained by the steady state test method and the QDT test method. The results comparison shows that the L-QDT method and the natural experimental method are also valid. It can be concluded...

  7. Experiences and lessons learned from 30 years of dynamic collector testing, modelling and simulation

    DEFF Research Database (Denmark)

    Perers, Bengt; Kovacs, Peter; Pettersson, Ulrik

    2011-01-01

    Dynamic testing and modeling (in contrast to Steady State line of action) of solar collectors is to prefer in most climates, except for the most extreme locations with clear skies every day. A very important part of dynamic testing and modeling is not only the thermal capacitance correction......, but also the split of the solar radiation absorption modeling, into beam and diffuse and the modeling of the collectors’ incidence angle dependency for both beam and diffuse radiation. These optical features are in most situations more important than the accuracy of the dynamic and thermal loss part...... concerning solar radiation measurements for beam and diffuse including alignment of sensors and test object, that are often not considered, which will be discussed and lessons learned will be given. A misalignment of just a few degrees of the collector test stand or the solar sensors will immediately show up...

  8. Validation of the dynamic direct exposure method for toxicity testing of diesel exhaust in vitro.

    Science.gov (United States)

    Joeng, Lucky; Hayes, Amanda; Bakand, Shahnaz

    2013-01-01

    Diesel exhaust emission is a major health concern because of the complex nature of its gaseous content (e.g., NO2, NO, CO, and CO2) and high concentration of particulate matter (PM) less than 2.5  μ m which allows for deeper penetration into the human pulmonary system upon inhalation. The aim of this research was to elucidate the potential toxic effects of diesel exhaust on a human pulmonary-based cellular system. Validation of a dynamic direct exposure method for both laboratory (230 hp Volvo truck engine) and field (Volkswagen Passat passenger car) diesel engines, at idle mode, was implemented. Human pulmonary type II epithelial cells (A549) grown on porous membranes were exposed to unmodified diesel exhaust at a low flow rate (37.5 mL/min). In parallel, diesel emission sampling was also conducted using real-time air monitoring techniques. Induced cellular effects were assessed using a range of in vitro cytotoxicity assays (MTS, ATP, and NRU). Reduction of cell viability was observed in a time-dependent manner following 30-60 mins of exposure with NRU as the most sensitive assay. The results suggest that the dynamic direct exposure method has the potential to be implemented for both laboratory- and field-based in vitro toxicity studies of diesel exhaust emissions.

  9. Conducting network penetration and espionage in a global environment

    CERN Document Server

    Middleton, Bruce

    2014-01-01

    When it's all said and done, penetration testing remains the most effective way to identify security vulnerabilities in computer networks. Conducting Network Penetration and Espionage in a Global Environment provides detailed guidance on how to perform effective penetration testing of computer networks-using free, open source, and commercially available tools, including Backtrack, Metasploit, Wireshark, Nmap, Netcat, and Nessus. It also considers exploits and other programs using Python, PERL, BASH, PHP, Ruby, and Windows PowerShell.The book taps into Bruce Middleton's decades of experience wi

  10. An electro-dynamic 3-dimensional vibration test bed for engineering testing

    Science.gov (United States)

    Saadatzi, Mohammadsadegh; Saadatzi, Mohammad Nasser; Ahmed, Riaz; Banerjee, Sourav

    2017-04-01

    Primary objective of the work is to design, fabrication and testing of a 3-dimensional Mechanical vibration test bed. Vibration testing of engineering prototype devices in mechanical and industrial laboratories is essential to understand the response of the envisioned model under physical excitation conditions. Typically, two sorts of vibration sources are available in physical environment, acoustical and mechanical. Traditionally, test bed to simulate unidirectional acoustic or mechanical vibration is used in engineering laboratories. However, a device may encounter multiple uncoupled and/or coupled loading conditions. Hence, a comprehensive test bed in essential that can simulate all possible sorts of vibration conditions. In this article, an electrodynamic vibration exciter is presented which is capable of simulating 3-dimensional uncoupled (unidirectional) and coupled excitation, in mechanical environments. The proposed model consists of three electromagnetic shakers (for mechanical excitation). A robust electrical control circuit is designed to regulate the components of the test bed through a self-developed Graphical User Interface. Finally, performance of the test bed is tested and validated using commercially available piezoelectric sensors.

  11. Capillary Drop Penetration Method to Characterize the Liquid Wetting of Powders.

    Science.gov (United States)

    Liu, Zhanjie; Wang, Yifan; Muzzio, Fernando J; Callegari, Gerardo; Drazer, German

    2017-01-10

    We present a method to characterize the wettability of powders, based on the penetration dynamics of a sessile drop deposited on a slightly compressed powder bed. First, we show that a direct comparison of the wetting properties of different liquids is possible without having to solve the three-dimensional liquid penetration problem, by considering the appropriate dimensionless variables. We show that the contact area between the sessile drop and the powder bed remains constant during most of the penetration process and demonstrate that as a result, the evolution of the dimensionless penetration volume is given by a universal function of the dimensionless time, with no dimensionless parameters. Then, using a reference liquid that completely wets the powder, it is possible to obtain an effective contact angle for a test liquid of interest, independent of other properties of the powder bed, such as permeability and a characteristic pore size. We apply the proposed method to estimate the contact angle of water with different powder blends, by using silicone oil as the reference liquid. Finally, to highlight the potential of the proposed method to characterize pharmaceutical powders, we consider a blend of lactose, acetaminophen, and a small amount of lubricant (magnesium stearate). The proposed method adequately captures a significant decrease in hydrophilicity that results from exposing the blend to excessive mixing, a well-known effect in the pharmaceutical industry.

  12. Penetration Testing Curriculum Development in Practice

    Science.gov (United States)

    Li, Chengcheng

    2015-01-01

    As both the frequency and the severity of network breaches have increased in recent years, it is essential that cybersecurity is incorporated into the core of business operations. Evidence from the U.S. Bureau of Labor Statistics (Bureau of Labor Statistics, 2012) indicates that there is, and will continue to be, a severe shortage of cybersecurity…

  13. Numerical test for hyperbolicity of chaotic dynamics in time-delay systems.

    Science.gov (United States)

    Kuptsov, Pavel V; Kuznetsov, Sergey P

    2016-07-01

    We develop a numerical test of hyperbolicity of chaotic dynamics in time-delay systems. The test is based on the angle criterion and includes computation of angle distributions between expanding, contracting, and neutral manifolds of trajectories on the attractor. Three examples are tested. For two of them, previously predicted hyperbolicity is confirmed. The third one provides an example of a time-delay system with nonhyperbolic chaos.

  14. Numerical test for hyperbolicity of chaotic dynamics in time-delay systems

    Science.gov (United States)

    Kuptsov, Pavel V.; Kuznetsov, Sergey P.

    2016-07-01

    We develop a numerical test of hyperbolicity of chaotic dynamics in time-delay systems. The test is based on the angle criterion and includes computation of angle distributions between expanding, contracting, and neutral manifolds of trajectories on the attractor. Three examples are tested. For two of them, previously predicted hyperbolicity is confirmed. The third one provides an example of a time-delay system with nonhyperbolic chaos.

  15. Creating a Test Validated Structural Dynamic Finite Element Model of the Multi-Utility Technology Test Bed Aircraft

    Science.gov (United States)

    Pak, Chan-Gi; Truong, Samson S.

    2014-01-01

    Small modeling errors in the finite element model will eventually induce errors in the structural flexibility and mass, thus propagating into unpredictable errors in the unsteady aerodynamics and the control law design. One of the primary objectives of Multi Utility Technology Test Bed, X-56A, aircraft is the flight demonstration of active flutter suppression, and therefore in this study, the identification of the primary and secondary modes for the structural model tuning based on the flutter analysis of X-56A. The ground vibration test validated structural dynamic finite element model of the X-56A is created in this study. The structural dynamic finite element model of the X-56A is improved using a model tuning tool. In this study, two different weight configurations of the X-56A have been improved in a single optimization run.

  16. Radon penetration of concrete slab cracks, joints, pipe penetrations, and sealants

    NARCIS (Netherlands)

    Nielson, KK; Rogers, VC; Holt, RB; Pugh, TD; Grondzik, WA; deMeijer, RJ

    1997-01-01

    Radon movement through 12 test slabs with different cracks, pipe penetrations, cold joints, masonry blocks, sealants, and tensile stresses characterized the importance of these anomalous structural domains, Diffusive and advective radon transport were measured with steady-state air pressure differen

  17. Research on the WIFI Control Soil Penetration Resistance Testing Device-Based on the Android Mobile Phone%土壤比贯入阻力测试装置研究-基于Android手机WIFI控制

    Institute of Scientific and Technical Information of China (English)

    任国强; 刘镇业; 李义德; 张宝鹏; 刘冬梅; 刘立意

    2017-01-01

    土壤比贯入阻力是反映耕地土壤板结程度的一项重要指标。现有测量装置多采用人工手动加载测量的方式,无法依据测量标准保持恒速,准确度、自动化程度及测量效率低,且劳动强度大。为此,应用传感器技术、机械电子技术、无线通信技术,以及智能终端设备设计研制了一种基于Android 手机WIFI 控制的电动式土壤比贯入阻力测量装置。该装置以单片机传感器为核心,采用电机驱动实现圆锥测头按 ASAE S313.3 FEB04标准以30.48 mm/s恒速贯入土壤,测量数据实时显示并存储于 TF 卡中;初步设计实现了使用 Android 手机,通过 WIFI通讯与测量装置建立连接、操控测量装置,接收、存储测量数据,并绘制曲线。测试结果表明:该装置结构简单、测量精度高、操作简单、自动化程度高,应用前景广阔。%Soil specific penetration resistance is an important indicator of the study of soil compaction degree .Existing products most use the manual measuring device .Manual operation can't keep constant speed and have low degree of intel-ligence , low precision , high labor intensity and low artificial measuring efficiency .For this purpose , use sensor technolo-gy,mechanical and electrical technology ,Wireless communication technology and Intelligent terminal equipment .The cor-responding design was developed based on the Android WiFi control of electrodynamic soil penetration resistance tester . Single chip microcomputer is the core of the device .The device driven by the motor let cone probe penetrate into the soil as the constant speed of 30 .48 mm/s ( the standard of ASAE S 313 .3 FEB04 ) , realize the real-time measurement and data storage in the measuring device .Using Android phones with WIFI communications , the preliminary design realizes establishing connection with measuring device , controlling measurement device , receiving saving measurement data and

  18. X-ray testing for short-time dynamic applications; Roentgenuntersuchungen fuer kurzzeitdynamische Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Kurfiss, Malte; Moser, Stefan; Popko, Gregor; Nau, Siegfried [Fraunhofer-Institut fuer Kurzzeitdynamik, Efringen-Kirchen (Germany). Ernst-Mach-Inst. (EMI)

    2017-08-01

    For nondestructive testing purposes new challenges are short-time dynamic processes. The application of x-ray flash tubes and modern high-speed cameras allows the observation of the opening of air-bags or the energy absorption of compressed tubes as occurring during a vehicle crash. Special algorithms designed for computerized tomography analyses allow the 3D reconstruction at individual time points of the dynamic process. Possibilities and limitations of the actual techniques are discussed.

  19. Analysis and test for space shuttle propellant dynamics (1/10th scale model test results). Volume 1: Technical discussion

    Science.gov (United States)

    Berry, R. L.; Tegart, J. R.; Demchak, L. J.

    1979-01-01

    Space shuttle propellant dynamics during ET/Orbiter separation in the RTLS (return to launch site) mission abort sequence were investigated in a test program conducted in the NASA KC-135 "Zero G" aircraft using a 1/10th-scale model of the ET LOX Tank. Low-g parabolas were flown from which thirty tests were selected for evaluation. Data on the nature of low-g propellant reorientation in the ET LOX tank, and measurements of the forces exerted on the tank by the moving propellent will provide a basis for correlation with an analytical model of the slosh phenomenon.

  20. Internet-based collaborative pseudo-dynamic testing of multi-span bridge structure

    Institute of Scientific and Technical Information of China (English)

    Dapeng Wang; Shizhu Tian; Xinjiang Cai; Yunlei Fan; Yan Xiao

    2009-01-01

    In this paper,the first Internet-based collaborative pseudo-dynamic testing of a multi-span bridge system in mainland China is presented in detail,which has been carried out by the collaboration of Hunan University (HNU),Harbin Institute of Technology (HIT) and Tsinghua University (TU) in mainland China,and the University of Southern California (USC) in the USA.The prototype system of Russion River Bridge at Southern California in America is illustrated.Different testing specimens,testing equipments and substructure boundary conditions at HNU and HIT laboratories are described.A network protocol platform for collaborative pseudo-dynamic testing,called NetSLab,and some function modules developed on the use of its standardized interface are introduced.Aiming at the MTS system widely used in structural testing,two approaches are presented to implement the communication interface between NetSLab and testing equipment,respectively,studied by HNU and HIT.The integrated networked testing system and collaborative testing procedures are presented.The testing results manifest that the networked collaborative testing system with powerful capability provides a testing platform with good coordination for complex models or actual structures,and achieves remote sharing of testing equipments.(C) 2009 National Natural Science Foundation of China and Chinese Academy of Sciences.Published by Elsevier Limited and Science inChina Press.All rights reserved.

  1. Radon penetration of concrete slab cracks, joints, pipe penetrations, and sealants.

    Science.gov (United States)

    Nielson, K K; Rogers, V C; Holt, R B; Pugh, T D; Grondzik, W A; de Meijer, R J

    1997-10-01

    Radon movement through 12 test slabs with different cracks, pipe penetrations, cold joints, masonry blocks, sealants, and tensile stresses characterized the importance of these anomalous structural domains. Diffusive and advective radon transport were measured with steady-state air pressure differences controlled throughout the deltaP = 0 to 60 Pa range. Diffusion coefficients (deltaP = 0) initially averaged 6.5 x 10(-8) m2 s(-1) among nine slabs with only 8% standard deviation, but increased due to drying by 0.16% per day over a 2-y period to an average of 2.0 x 10(-7) m2 s(-1). An asphalt coating reduced diffusion sixfold but an acrylic surface sealant had no effect. Diffusion was 42 times higher in solid masonry blocks than in concrete and was not affected by small cracks. Advective transport (deltaP permeability), pipe penetrations, and caulked gaps, but was significant for cracks, disturbed pipe penetrations, cold joints, masonry blocks, and concrete under tensile stress. Crack areas calculated to be as small as 10(-7) m2 significantly increased radon advection. Algebraic expressions predict air velocity and effective crack width from enhanced radon transport and air pressures. Masonry blocks, open cracks, and slab cold joints enhance radon penetration but stressed slabs, undisturbed pipe penetrations, and sealed cracks may not.

  2. Evaluation of dynamic fracture toughness for Yong Gwang unit 5 reactor pressure vessel materials (Baseline Tests)

    Energy Technology Data Exchange (ETDEWEB)

    Chi Se Hwan; Kim, Joo Hag; Hong, Jun Hwa; Kwon, Sun Chil; Lee, Bong Sang [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    The dynamic fracture toughness (K{sub d}) of intermediate shell and its weld in SA 508 CI. 3 Yong Gwang 5 reactor pressure vessel was determined and evaluated. Precracked thirty six Charpy specimens were tested by using an instrumented impact tester. The purpose of present work is to evaluate and confirm the un-irradiated dynamic fracture toughness and to provide pre-irradiation baseline data for future evaluation on dynamic fracture toughness change during operation. 18 refs., 5 figs., 5 tabs. (Author)

  3. Water Penetration through a Superhydrophobic Mesh During a Drop Impact.

    Science.gov (United States)

    Ryu, Seunggeol; Sen, Prosenjit; Nam, Youngsuk; Lee, Choongyeop

    2017-01-06

    When a water drop impacts a mesh having submillimeter pores, a part of the drop penetrates through the mesh if the impact velocity is sufficiently large. Here we show that different surface wettability, i.e., hydrophobicity and superhydrophobicity, leads to different water penetration dynamics on a mesh during drop impact. We show, despite the water repellence of a superhydrophobic surface, that water can penetrate a superhydrophobic mesh more easily (i.e., at a lower impact velocity) over a hydrophobic mesh via a penetration mechanism unique to a superhydrophobic mesh. On a superhydrophobic mesh, the water penetration can occur during the drop recoil stage, which appears at a lower impact velocity than the critical impact velocity for water penetration right upon impact. We propose that this unique water penetration on a superhydrophobic mesh can be attributed to the combination of the hydrodynamic focusing and the momentum transfer from the water drop when it is about to bounce off the surface, at which point the water drop retrieves most of its kinetic energy due to the negligible friction on superhydrophobic surfaces.

  4. A novel test rig for the dynamic characterization of large size tilting pad journal bearings

    Science.gov (United States)

    Forte, P.; Ciulli, E.; Saba, D.

    2016-09-01

    The present work concerns the realization of a test bench for the dynamic characterization of high performance tilting pad journal bearings, within a collaboration between the Department of Civil and Industrial Engineering of Pisa, GE Oil&Gas and AM Testing. The objective is to cover journal diameters of interest of GE, from 150 to 300 mm, with peripheral speeds up to 150 m/s, static load up to 270 kN, dynamic loads up to 30 kN and frequencies up to 350 Hz, performances that make the apparatus very competitive worldwide. The adopted configuration has the test article (TA) floating at the mid-span of a rotor supported by two rolling bearings. The TA is statically loaded by a hydraulic actuator and excited dynamically by two orthogonal hydraulic actuators. Construction was recently concluded and preliminary tests are under way. In order to assess in advance the possible accuracy of the tests, a dynamic lumped parameter model of the test bench was developed to perform virtual experiments, including several possible sources of experimental errors and uncertainties. The model was implemented using reduced stiffness and mass matrices obtained from Finite Element Analysis by Component Modal Synthesis.

  5. Feature Profile Simulations and Finite Penetration Depth

    Science.gov (United States)

    Moroz, Paul; Moroz, Daniel

    2012-10-01

    In plasma materials processing, energetic ions, neutrals and UV photons typically penetrate deep inside solid materials breaking atomic bonds and displacing atoms on their paths. These important phenomena are rarely taken into consideration in processing simulation software, primarily because the proper penetration depths and the corresponding energy depositions, breaking bonds, and atom displacements are difficult and computationally expensive to compute. The FPS-3D feature profile simulator [1-2] is doing that computationally efficiently by utilizing tabulated results obtained with other methods. We discuss, compare, and present results of such simulations made with different methods, one of which is the molecular dynamics analysis. In general, molecular dynamics could be used for simulating materials processing, etching and deposition, but it is extremely computationally expensive to be used for large groups of atoms. In practice, molecular dynamics methods are too slow to be used for feature profile simulations. However, they could help in defining proper chemical reactions and corresponding rates to be used in an advanced feature profile simulator such as FPS-3D. We present results of FPS-3D simulations for Si and SiO2 etching in Ar/Cl2 and Ar/C4F6/O2 plasmas. [4pt] [1] P. Moroz, ``General Feature Profile Simulator FPS-3D,'' ECS Transactions, 35, 25 (2011). [0pt] [2] P. Moroz, ``Numerical Simulation of Feature Profile Evolution using FPS-3D,'' IEEE Transactions of Plasma Science, 39, 2804 (2011).

  6. STATIC AND DYNAMIC IN VITRO TEST OF BIOACTIVITY OF GLASS CERAMICS

    Directory of Open Access Journals (Sweden)

    JANA KOZÁNKOVÁ

    2011-06-01

    Full Text Available The bioactivity of glass ceramics from Li2O–SiO2–CaO–P2O5–CaF2 system, with different amount of fluorapatite expressed as P2O5 content, has been tested in vitro under static and dynamic regime. The paper reports the results of bioactivity test of glass ceramics in static and dynamic regime. XRD, SEM and EPMA analysis were used to characterise the sample as well as to detect the presence of new phase onto the surface of glass ceramics. The bioactivity, as demonstrated by the formation of new apatite layer, depends on P2O5 content and testing regime. In static regime, one can observe a fine microstructure of hydroxyapatite layer on the surface on glass ceramics samples. In dynamic regime, the formation rate of this layer seems to be retarded in comparison with that of static regime.

  7. Multifrequency excitation method for rapid and accurate dynamic test of micromachined gyroscope chips.

    Science.gov (United States)

    Deng, Yan; Zhou, Bin; Xing, Chao; Zhang, Rong

    2014-10-17

    A novel multifrequency excitation (MFE) method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE) method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  8. TEST METHOD OF HIGH-SPEED ON-OFF VALVE DYNAMIC CHARACTERISTICS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    According to the valve port features of high speed on-offvalve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed. Having analyzed the factors related to the dynamic characteristics of an a-type half bridge, a rule for designing the outlet chamber's volume is worked out. According to the rule, a test stand is built to test the self-developed high-speed on-off valve. From the test results, it can be seen that with the outlet chamber's volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little. The test results conform to the simulation results, which proves the correctness of the method.

  9. Multifrequency Excitation Method for Rapid and Accurate Dynamic Test of Micromachined Gyroscope Chips

    Directory of Open Access Journals (Sweden)

    Yan Deng

    2014-10-01

    Full Text Available A novel multifrequency excitation (MFE method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  10. The Dynamics of Regional and Global Expansion

    DEFF Research Database (Denmark)

    Geisler Asmussen, Christian; Nielsen, Bo Bernhard; Osegowitsch, Tom

    2015-01-01

    Purpose – The purpose of this paper is to model and test the dynamics of home-regional and global penetration by multi-national enterprises (MNEs). Design/methodology/approach – Drawing on international business (IB) theory, the authors model MNEs adjusting their home-regional and global market...... domain. Findings – The authors demonstrate that MNEs do penetrate both home-regional and global markets, often simultaneously, and that penetration levels often oscillate within an MNE over time. The authors show firms’ rates of regional and global expansion to be affected by their existing regional...... presence over time. The authors test the resulting hypotheses using sales data from a sample of 220 of the world’s largest MNEs over the period 1995-2005. The authors focus specifically on the relationship between levels of market penetration inside and outside the home region and rates of change in each...

  11. Penetration through the Skin Barrier

    DEFF Research Database (Denmark)

    Nielsen, Jesper Bo; Benfeldt, Eva; Holmgaard, Rikke

    2016-01-01

    . During recent decades, the latter has received increased attention as a route for intentionally delivering drugs to patients. This has stimulated research in methods for sampling, measuring and predicting percutaneous penetration. Previous chapters have described how different endogenous, genetic...... and exogenous factors may affect barrier characteristics. The present chapter introduces the theory for barrier penetration (Fick's law), and describes and discusses different methods for measuring the kinetics of percutaneous penetration of chemicals, including in vitro methods (static and flow......-through diffusion cells) as well as in vivo methods (microdialysis and microperfusion). Then follows a discussion with examples of how different characteristics of the skin (age, site and integrity) and of the penetrants (size, solubility, ionization, logPow and vehicles) affect the kinetics of percutaneous...

  12. Testing of tunnel support: dynamic load testing of rock support containment systems (eg wire mesh).

    CSIR Research Space (South Africa)

    Ortlepp, WD

    1997-07-01

    Full Text Available to be compatible with that which could be expected to be encountered during reasonably severe to significantly large bursts. To achieve this drop weight test facility was designed and constructed with the following capabilities, considered to be representative...

  13. The van Hove distribution function for brownian hard spheres: dynamical test particle theory and computer simulations for bulk dynamics.

    Science.gov (United States)

    Hopkins, Paul; Fortini, Andrea; Archer, Andrew J; Schmidt, Matthias

    2010-12-14

    We describe a test particle approach based on dynamical density functional theory (DDFT) for studying the correlated time evolution of the particles that constitute a fluid. Our theory provides a means of calculating the van Hove distribution function by treating its self and distinct parts as the two components of a binary fluid mixture, with the "self " component having only one particle, the "distinct" component consisting of all the other particles, and using DDFT to calculate the time evolution of the density profiles for the two components. We apply this approach to a bulk fluid of Brownian hard spheres and compare to results for the van Hove function and the intermediate scattering function from Brownian dynamics computer simulations. We find good agreement at low and intermediate densities using the very simple Ramakrishnan-Yussouff [Phys. Rev. B 19, 2775 (1979)] approximation for the excess free energy functional. Since the DDFT is based on the equilibrium Helmholtz free energy functional, we can probe a free energy landscape that underlies the dynamics. Within the mean-field approximation we find that as the particle density increases, this landscape develops a minimum, while an exact treatment of a model confined situation shows that for an ergodic fluid this landscape should be monotonic. We discuss possible implications for slow, glassy, and arrested dynamics at high densities.

  14. Experimental study on the flight dynamics of a bioinspired ornithopter: free flight testing and wind tunnel testing

    Science.gov (United States)

    Lee, Jun-Seong; Han, Jae-Hung

    2012-09-01

    This study experimentally shows the flight dynamics of a bioinspired ornithopter using two different types of approach: (1) free flight testing, and (2) wind tunnel testing. An ornithopter is flown in straight and level flight with a fixed wingbeat frequency and tail elevation angle. A three-dimensional visual tracking system is applied to follow the retro-reflective markers on the ornithopter and record the flight trajectories. The unique oscillatory behavior of the body in the longitudinal plane is observed in the free flight testing and the detailed wing and tail deformations are also obtained. Based on the trim flight data, a specially devised tether device is designed and employed to emulate the free flight conditions in the wind tunnel. The tether device provides minimal mechanical interference and longitudinal flight dynamic characteristics similar to those of free flight. On introducing a pitching moment disturbance to the body, the oscillation recovered to the original trajectory turns out to be a stable limit-cycle oscillation (LCO). During the wind tunnel testing, the magnitude of LCO is effectively suppressed by active tail motion.

  15. Is Color Experience Cognitively Penetrable?

    Science.gov (United States)

    Brogaard, Berit; Gatzia, Dimitria E

    2017-01-01

    Is color experience cognitively penetrable? Some philosophers have recently argued that it is. In this paper, we take issue with the claim that color experience is cognitively penetrable. We argue that the notion of cognitive penetration that has recently dominated the literature is flawed since it fails to distinguish between the modulation of perceptual content by non-perceptual principles and genuine cognitive penetration. We use this distinction to show that studies suggesting that color experience can be modulated by factors of the cognitive system do not establish that color experience is cognitively penetrable. Additionally, we argue that even if color experience turns out to be modulated by color-related beliefs and knowledge beyond non-perceptual principles, it does not follow that color experience is cognitively penetrable since the experiences of determinate hues involve post-perceptual processes. We conclude with a brief discussion of the implications that these ideas may have on debates in philosophy. Copyright © 2016 Cognitive Science Society, Inc.

  16. A moist aquaplanet variant of the Held-Suarez test for atmospheric model dynamical cores

    Science.gov (United States)

    Thatcher, Diana R.; Jablonowski, Christiane

    2016-04-01

    A moist idealized test case (MITC) for atmospheric model dynamical cores is presented. The MITC is based on the Held-Suarez (HS) test that was developed for dry simulations on "a flat Earth" and replaces the full physical parameterization package with a Newtonian temperature relaxation and Rayleigh damping of the low-level winds. This new variant of the HS test includes moisture and thereby sheds light on the nonlinear dynamics-physics moisture feedbacks without the complexity of full-physics parameterization packages. In particular, it adds simplified moist processes to the HS forcing to model large-scale condensation, boundary-layer mixing, and the exchange of latent and sensible heat between the atmospheric surface and an ocean-covered planet. Using a variety of dynamical cores of the National Center for Atmospheric Research (NCAR)'s Community Atmosphere Model (CAM), this paper demonstrates that the inclusion of the moist idealized physics package leads to climatic states that closely resemble aquaplanet simulations with complex physical parameterizations. This establishes that the MITC approach generates reasonable atmospheric circulations and can be used for a broad range of scientific investigations. This paper provides examples of two application areas. First, the test case reveals the characteristics of the physics-dynamics coupling technique and reproduces coupling issues seen in full-physics simulations. In particular, it is shown that sudden adjustments of the prognostic fields due to moist physics tendencies can trigger undesirable large-scale gravity waves, which can be remedied by a more gradual application of the physical forcing. Second, the moist idealized test case can be used to intercompare dynamical cores. These examples demonstrate the versatility of the MITC approach and suggestions are made for further application areas. The new moist variant of the HS test can be considered a test case of intermediate complexity.

  17. COMPARISON OF ELASTIC OF POROUS CORDIERITE BY FLEXURE AND DYNAMIC TEST METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Stafford, Randall [Cummins, Inc; Golovin, K. B. [Cummins, Inc; Dickinson, A. [Cummins, Inc; Watkins, Thomas R [ORNL; Shyam, Amit [ORNL; Lara-Curzio, Edgar [ORNL

    2012-01-01

    Previous work showed differences in apparent elastic modulus between mechanical flexure testing and resonance methods. Flexure tests have been conducted using non-contact optical systems to directly measure deflection for calculation of elastic modulus. Dynamic test methods for elastic modulus measurement were conducted on the same material for comparison. The results show significant difference in the apparent elastic modulus for static flexure versus dynamic methods. The significance of the difference in apparent elastic modulus on thermal stress and the hypotheses for these differences will be discussed. Dynamic measurement (resonance) and static measurement (mechanical) produce different values for elastic modulus of porous cordierite ceramic. The elastic modulus from resonance is a measure of the material response at very low strain which is different from the material response in a mechanical test with relatively large strain. The apparent elastic moduli for dynamic versus static test methods in this study are different by a factor of two. This result has significant impact on calculated stress and life in an aftertreatment component.

  18. Evaluation of dynamic fracture mechanics in the AISI 316 stainless steel using instrumented Charpy impact testing

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Juliano Daniel de [Empresa Brasileira de Aeronautica S.A. (EMBRAER), Sao Jose dos Campos, SP (Brazil)]. E-mail: juliano.daniel@embraer.com.br; Rodrigues, Bruno Jardim Franca [Novo Nordisk, Montes Claros, MG (Brazil)]. E-mail: brro@novonordisk.com; Vilela, Jefferson Jose; Martins, Geraldo de Paula [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mail: gpm@cdtn.br; Carneiro, Jose Rubens Goncalves [Pontificia Universidade Catolica de Minas Gerais (PUC Minas), Belo Horizonte, MG (Brazil)]. E-mail: joserub@pucminas.br

    2007-07-01

    The nuclear power plant's surveillance program is based in Charpy test. But, this test could be used to evaluate integrity's secondary circuit. The steel similar to AISI 316 stainless steel could be used in this circuit. Some secondary circuit's components could be failed in dynamic condition. The dynamic fracture mechanics behavior of the AISI 316 was studied by using instrumented Charpy impact testing. The dynamic fracture toughness (J{sub ld}) could be evaluated by four different methods: compliance changing rate, stretching zone, energy revised and maximum load energy. The tests were made in temperature -196 deg C, room and 200 deg C. At each temperature two specimens were tested. The impact energy was 300 J and the impact velocity was 5.12 m/s. The Charpy specimens 10 x 10 x 50 mm were pre-cracked until 5 mm according to ASTM E-23. Stretching zone size was measured and analyzed by observing the fracture surfaces that were obtained in a scanning electron microscope. The dynamic fracture toughness calculated among four different methods showed a large difference. All studied methods did not agree ASTM E1820 (2001) standard that indicated to plane strain did not occurred in the tip crack. (author)

  19. Applied Research on Field Test Method for Concrete Resistance to Chloride Ion Penetration%现场测试混凝土抗氯离子渗透性方法的应用研究

    Institute of Scientific and Technical Information of China (English)

    王娜; 李俊毅; 张鹏; 杨建军; 雷周

    2011-01-01

    为快速、准确地测定混凝土中氯离子的含量,以实现对混凝土耐久性的有效评价和钢筋腐蚀的适时防护与有效修复,研究现场测试氯离子渗透性的方法是非常必要的.结合客运专线工程施工情况,分别按矿物掺合料不同掺量以及不同的强度等级进行配合比设计试验,采用PERMIT离子迁移仪对混凝土试件进行氯离子扩散系数的测定,并采用电通量法进行验证.结果表明:随着电通量的增加,氯离子扩散系数呈现增加的趋势,二者存在很好的线性关系;双掺粉煤灰+矿粉的混凝土抗氯离子侵入性优于单掺粉煤灰的混凝土;PERMIT离子渗透试验方法测得的试验结果准确可靠,具有很强的实用性.可以为混凝土耐久性的判定提供依据.%For rapid and accurate determination of chloride content in concrete to achieve the effective evaluation of the durability of concrete and steel corrosion protection and effective timely repair. The study of chloride ion permeability field test method is very necessary. Combining with the construction works of a passenger railway line, mix ratio tests were designed respectively for concrete with different contents of mineral admixtures and different strength grades. PERMIT ion mobility instrument was used to determine the chloride ion diffusion coefficient of concrete specimens. The results show that, with the increase of electric flux, chloride ion diffusion coefficient showed an increasing trend, both with good linear relationship. Fly ash and slag concrete resistance to ingress of chloride ions was better than concrete singly added with fly ash. The measured test results of PERMIT ion penetration test method are accurate and reliable, and highly practical. It can provide basis for determining the durability of concrete.

  20. Standard practice for verification of constant amplitude dynamic forces in an axial fatigue testing system

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This practice covers procedures for the dynamic verification of cyclic force amplitude control or measurement accuracy during constant amplitude testing in an axial fatigue testing system. It is based on the premise that force verification can be done with the use of a strain gaged elastic element. Use of this practice gives assurance that the accuracies of forces applied by the machine or dynamic force readings from the test machine, at the time of the test, after any user applied correction factors, fall within the limits recommended in Section 9. It does not address static accuracy which must first be addressed using Practices E 4 or equivalent. 1.2 Verification is specific to a particular test machine configuration and specimen. This standard is recommended to be used for each configuration of testing machine and specimen. Where dynamic correction factors are to be applied to test machine force readings in order to meet the accuracy recommended in Section 9, the verification is also specific to the c...

  1. Mathematical Modeling of Electrolyte Flow Dynamic Patterns and Volumetric Flow Penetrations in the Flow Channel over Porous Electrode Layered System in Vanadium Flow Battery with Serpentine Flow Field Design

    CERN Document Server

    Ke, Xinyou; Alexander, J Iwan D; Savinell, Robert F

    2016-01-01

    In this work, a two-dimensional mathematical model is developed to study the flow patterns and volumetric flow penetrations in the flow channel over the porous electrode layered system in vanadium flow battery with serpentine flow field design. The flow distributions at the interface between the flow channel and porous electrode are examined. It is found that the non-linear pressure distributions can distinguish the interface flow distributions under the ideal plug flow and ideal parabolic flow inlet boundary conditions. However, the volumetric flow penetration within the porous electrode beneath the flow channel through the integration of interface flow velocity reveals that this value is identical under both ideal plug flow and ideal parabolic flow inlet boundary conditions. The volumetric flow penetrations under the advection effects of flow channel and landing/rib are estimated. The maximum current density achieved in the flow battery can be predicted based on the 100% amount of electrolyte flow reactant ...

  2. Conspray dynamic sleeve piston coal feeder. Phase II. Verification tests. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-26

    This report details the performance of Phase II: Verification Tests of the Conspray dynamic sleeve piston coal feeder. The machine performed for 200 hours at 700 psi backpressure, utilizing a 70% to 200 mesh Utah bituminous coal as feedstock. All test work was satisfactorily completed. A post-test inspection was performed. A report of component wear and failures incurred in testing is included as well as suggestions for machine upgrades. The overall conclusion is that the dynamic sleeve piston feeder has proven its ability to operate safely and reliably. When problems have occurred, the machine has demonstrated inherent safety by shutting down without endangering process or personnel. With the recommended improvements incorporated into the feeder, the unit will be ready for installation on a pilot scale coal gasifier. 9 figures, 11 tables.

  3. The mechanical design and dynamic testing of the IBEX-H1 electrostatic analyzer spacecraft instrument

    Energy Technology Data Exchange (ETDEWEB)

    Bernardin, John D [Los Alamos National Laboratory; Baca, Allen G [SNL

    2009-01-01

    This paper presents the mechanical design, fabrication and dynamic testing of an electrostatic analyzer spacecraft instrument. The functional and environmental requirements combined with limited spacecraft accommodations, resulted in complex component geometries, unique material selections, and difficult fabrication processes. The challenging aspects of the mechanical design and several of the more difficult production processes are discussed. In addition, the successes, failures, and lessons learned from acoustic and random vibration testing of a full-scale prototype instrument are presented.

  4. Designing and Testing Contols to Mitigate Dynamic Loads in the Controls Advanced Research Turbine: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.D.; Stol, K.A.

    2008-01-01

    The National Renewable Energy Laboratory is designing, implementing, and testing advanced controls to maximize energy extraction and reduce structural dynamic loads of wind turbines. These control designs are based on a linear model of the turbine that is generated by specialized modeling software. In this paper, we show the design and simulation testing of a control algorithm to mitigate blade, tower, and drivetrain loads using advanced state-space control design methods.

  5. Dynamical Behaviour of a Modulated Torsion Pendulum in Test of Weak Equivalence Principle

    Institute of Scientific and Technical Information of China (English)

    YUE Ying; FAN Shu-Hua; LIU Lin-Xia; LUO Jun

    2005-01-01

    @@ The dynamic behaviour of a modulated torsion pendulum used to test the weak equivalence principle (WEP) is studied in detail. Theoretical analysis shows that the pendulum will be driven by a force with double-frequency of the rotating turntable no matter whether the WEP is valid or not. This double-frequency effect should be considered for improving the sensitivity of the modulated pendulum in test of the WEP.

  6. Air Force Dynamic Mechanical Analysis of NATO Round Robin Propellant Testing for Development of AOP-4717

    Science.gov (United States)

    2015-09-23

    Round Robin Propellant Testing for Development of AOP-4717 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...area code) N/A Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 0 Air Force Dynamic Mechanical Analysis of NATO Round Robin ...the clamps are tight at the coldest temperature. • Long tests such as the frequency sweep sequences prescribed in this round robin may be

  7. On the Design of a Gasgun Accelerator for Dynamic Warhead Tests

    Science.gov (United States)

    1993-10-01

    warheadversneller- systeem is aangetoond en een aantal deelontwerpen opgesteld. Het nadere ontwerp en de constructie van het systeem lijken grotendeels binnen de...Dist Avail a~d/ior Spucial TNO-report PML. 253291358 Page 3 CONTENTS SUMMARY/SAMENVATTING 2 CONTENTS 3 1 INTRODUCTION 6 1.1 The present PML test...gasgun system for dynamic warhead tests, including 25 kf for program management INTERNAL EXTERNAL (kf) (kf) 315 335 TOTAL COST 650 12.4 Operating

  8. Neutron-antineutron transition as a test-bed for dynamical CPT violations

    Science.gov (United States)

    Addazi, Andrea

    2016-05-01

    We show a simple mechanism for a dynamical CPT violation in the neutron sector. In particular, we show a CPT-violating see-saw mechanism, generating a Majorana mass and a CPT-violating mass for the neutron. CPT-violating see-saw involves a sterile partner of the neutron, living in a hidden sector, in which CPT is spontaneously broken. In particular, neutrons (antineutrons) can communicate with the hidden sector through nonperturbative quantum gravity effects called exotic instantons. Exotic instantons dynamically break R-parity, generating one effective vertex between the neutron and its sterile partner. In this way, we show how a small CPT-violating mass term for the neutron is naturally generated. This model can be tested in the next generation of experiments in neutron-antineutron physics. This strongly motivates researches of CPT-violating effects in neutron-antineutron physics as a test-bed for dynamical CPT-violations in SM.

  9. Study on Mined-out Area Detection Based on In-situ Test with Ground Penetrating Radar%基于探地雷达原位试验的空区探测研究

    Institute of Scientific and Technical Information of China (English)

    金解放; 赵奎

    2011-01-01

    选用露天矿山边坡已揭露的空区进行探地雷达原位试验,利用媒质的介电常数以及电磁波在地下介质中的反射和衰减特性,结合空区露头的实际情况以及钻探资料对探测结果进行识别解释;进而归纳出该矿山边坡不同地质条件下电磁波反射特征.将原位测试得到的规律应用到该矿山其他位置处的空区探测,并用现场钻孔和地质资料对其可靠性进行检验.研究结果表明,基于原位试验获取拟探测矿山的雷达资料解释电磁波在同一矿山空区及其围岩中的传播规律的方法可行.%In-situ testes with ground penetrating radar(GPR) were conducted for the known mined-out area under open pit slope. Utilizing permittivity of medium and attenuation characteristic of electromagnetic wave during its propagation in heterogeneous underground medium, detection data were identified and interpreted based on the field observation of outcrops in mined-out area and drilling data. Reflection characteristics of electromagnetic wave were induced under different geological conditions. Results obtained from in-situ test were applied to cavity detection for other site in the same mine, and the reliability of detection results was verified with the geological and drilling data. Results show that it is feasible to interpret the propagation of electromagnetic wave in the mind-out area and its surrounding rocks with obtained radar data based on in-situ tests.

  10. Substructurability: the effect of interface location on a real-time dynamic substructuring test

    Science.gov (United States)

    Terkovics, N.; Neild, S. A.; Lowenberg, M.; Szalai, R.; Krauskopf, B.

    2016-08-01

    A full-scale experimental test for large and complex structures is not always achievable. This can be due to many reasons, the most prominent one being the size limitations of the test. Real-time dynamic substructuring is a hybrid testing method where part of the system is modelled numerically and the rest of the system is kept as the physical test specimen. The numerical-physical parts are connected via actuators and sensors and the interface is controlled by advanced algorithms to ensure that the tested structure replicates the emulated system with sufficient accuracy. The main challenge in such a test is to overcome the dynamic effects of the actuator and associated controller, that inevitably introduce delay into the substructured system which, in turn, can destabilize the experiment. To date, most research concentrates on developing control strategies for stable recreation of the full system when the interface location is given a priori. Therefore, substructurability is mostly studied in terms of control. Here, we consider the interface location as a parameter and study its effect on the stability of the system in the presence of delay due to actuator dynamics and define substructurability as the system's tolerance to delay in terms of the different interface locations. It is shown that the interface location has a major effect on the tolerable delays in an experiment and, therefore, careful selection of it is necessary.

  11. [Development and testing of theories of population dynamics]. First annual report

    Energy Technology Data Exchange (ETDEWEB)

    Murdoch, W.W.; Bence, J.R.; McCauley, E.; Nisbet, R.M.

    1990-03-15

    We report new analyses to test competing models of the Daphnia/algal interaction. Our model is good at predicting equilibrium algal densities, and if our new insights can account for stability in this system across a wide range of natural environments, this may contribute to understanding predator-prey dynamics in general.

  12. Testing the hypothesis of modified dynamics with low surface brightness galaxies and other evidence

    NARCIS (Netherlands)

    McGaugh, SS; de Blok, WJG

    1998-01-01

    The rotation curves of low surface brightness galaxies provide a unique data set with which to test alternative theories of gravitation over a large dynamic range in size, mass, surface density, and acceleration. Many clearly fail, including any in which the mass discrepancy appears at a particular

  13. Soil water dynamics at a midlatitude test site: Field measurements and box modeling approaches

    NARCIS (Netherlands)

    Baudena, M.; Bevilacqua, I.; Canone, D.; Ferraris, S.; Previati, M.; Provenzale, A.

    2012-01-01

    We test the ability of three box models (Milly, 1993; Kim et al., 1996; Laio et al., 2001b) to describe soil moisture dynamics in a regularly monitored experimental site in northwestern Italy. The models include increasingly complex representations of leakage and evapotranspiration processes. We for

  14. Existence and uniqueness of dynamic evolutions for a peeling test in dimension one

    Science.gov (United States)

    Dal Maso, Gianni; Lazzaroni, Giuliano; Nardini, Lorenzo

    2016-11-01

    In this paper we present a one-dimensional model of a dynamic peeling test for a thin film, where the wave equation is coupled with a Griffith criterion for the propagation of the debonding front. Our main results provide existence and uniqueness for the solution to this coupled problem under different assumptions on the data.

  15. Teachers' Preferences for Educational Planning: Dynamic Testing, Teaching Experience and Teachers' Sense of Efficacy

    Science.gov (United States)

    Bosma, Tirza; Hessels, Marco G. P.; Resing, Wilma C. M.

    2012-01-01

    This study surveyed a sample of 188 elementary teachers with respect to their preference for information regarding educational planning, in particular information captured with dynamic testing procedures. The influence of teachers' experience and sense of efficacy on teachers' preferences was also investigated. Results indicated teachers'…

  16. Low Density Supersonic Decelerator (LDSD) Supersonic Flight Dynamics Test (SFDT) Plume Induced Environment Modelling

    Science.gov (United States)

    Mobley, B. L.; Smith, S. D.; Van Norman, J. W.; Muppidi, S.; Clark, I

    2016-01-01

    Provide plume induced heating (radiation & convection) predictions in support of the LDSD thermal design (pre-flight SFDT-1) Predict plume induced aerodynamics in support of flight dynamics, to achieve targeted freestream conditions to test supersonic deceleration technologies (post-flight SFDT-1, pre-flight SFDT-2)

  17. Testing an Idealized Dynamic Cascade Model of the Development of Serious Violence in Adolescence

    Science.gov (United States)

    Dodge, Kenneth A.; Greenberg, Mark T.; Malone, Patrick S.

    2008-01-01

    A dynamic cascade model of development of serious adolescent violence was proposed and tested through prospective inquiry with 754 children (50% male; 43% African American) from 27 schools at 4 geographic sites followed annually from kindergarten through Grade 11 (ages 5-18). Self, parent, teacher, peer, observer, and administrative reports…

  18. Explanatory item response modeling of children's change on a dynamic test of analogical reasoning

    NARCIS (Netherlands)

    Stevenson, C.E.; Hickendorff, M.; Resing, W.C.M.; Heiser, W.J.; de Boeck, P.A.L.

    Dynamic testing is an assessment method in which training is incorporated into the procedure with the aim of gauging cognitive potential. Large individual differences are present in children's ability to profit from training in analogical reasoning. The aim of this experiment was to investigate

  19. The validity and reliability of a dynamic neuromuscular stabilization-heel sliding test for core stability.

    Science.gov (United States)

    Cha, Young Joo; Lee, Jae Jin; Kim, Do Hyun; You, Joshua Sung H

    2017-07-21

    Core stabilization plays an important role in the regulation of postural stability. To overcome shortcomings associated with pain and severe core instability during conventional core stabilization tests, we recently developed the dynamic neuromuscular stabilization-based heel sliding (DNS-HS) test. The purpose of this study was to establish the criterion validity and test-retest reliability of the novel DNS-HS test. Twenty young adults with core instability completed both the bilateral straight leg lowering test (BSLLT) and DNS-HS test for the criterion validity study and repeated the DNS-HS test for the test-retest reliability study. Criterion validity was determined by comparing hip joint angle data that were obtained from BSLLT and DNS-HS measures. The test-retest reliability was determined by comparing hip joint angle data. Criterion validity was (ICC2,3) = 0.700 (pcore stability measures. Test-retest reliability was (ICC3,3) = 0.953 (pcore stability measures. Test-retest reliability data suggests that DNS-HS core stability was a reliable test for core stability. Clinically, the DNS-HS test is useful to objectively quantify core instability and allow early detection and evaluation.

  20. Ground test program for a full-size solar dynamic heat receiver

    Science.gov (United States)

    Sedgwick, L. M.; Kaufmann, K. J.; McLallin, K. L.; Kerslake, T. W.

    Test hardware, facilities, and procedures were developed to conduct ground testing of a full-size, solar dynamic heat receiver in a partially simulated, low earth orbit environment. The heat receiver was designed to supply 102 kW of thermal energy to a helium and xenon gas mixture continuously over a 94 minute orbit, including up to 36 minutes of eclipse. The purpose of the test program was to quantify the receiver thermodynamic performance, its operating temperatures, and thermal response to changes in environmental and power module interface boundary conditions. The heat receiver was tested in a vacuum chamber using liquid nitrogen cold shrouds and an aperture cold plate. Special test equipment was designed to provide the required ranges in interface boundary conditions that typify those expected or required for operation as part of the solar dynamic power module on the Space Station Freedom. The support hardware includes an infrared quartz lamp heater with 30 independently controllable zones and a closed-Brayton cycle engine simulator to circulate and condition the helium-xenon gas mixture. The test article, test support hardware, facilities, and instrumentation developed to conduct the ground test program are all described.

  1. Optical Measurement Techniques for Rocket Engine Testing and Component Applications: Digital Image Correlation and Dynamic Photogrammetry

    Science.gov (United States)

    Gradl, Paul

    2016-01-01

    NASA Marshall Space Flight Center (MSFC) has been advancing dynamic optical measurement systems, primarily Digital Image Correlation, for extreme environment rocket engine test applications. The Digital Image Correlation (DIC) technology is used to track local and full field deformations, displacement vectors and local and global strain measurements. This technology has been evaluated at MSFC through lab testing to full scale hotfire engine testing of the J-2X Upper Stage engine at Stennis Space Center. It has been shown to provide reliable measurement data and has replaced many traditional measurement techniques for NASA applications. NASA and AMRDEC have recently signed agreements for NASA to train and transition the technology to applications for missile and helicopter testing. This presentation will provide an overview and progression of the technology, various testing applications at NASA MSFC, overview of Army-NASA test collaborations and application lessons learned about Digital Image Correlation.

  2. Implementation and Test of the Automatic Flight Dynamics Operations for Geostationary Satellite Mission

    Science.gov (United States)

    Park, Sangwook; Lee, Young-Ran; Hwang, Yoola; Javier Santiago Noguero Galilea

    2009-12-01

    This paper describes the Flight Dynamics Automation (FDA) system for COMS Flight Dynamics System (FDS) and its test result in terms of the performance of the automation jobs. FDA controls the flight dynamics functions such as orbit determination, orbit prediction, event prediction, and fuel accounting. The designed FDA is independent from the specific characteristics which are defined by spacecraft manufacturer or specific satellite missions. Therefore, FDA could easily links its autonomous job control functions to any satellite mission control system with some interface modification. By adding autonomous system along with flight dynamics system, it decreases the operator’s tedious and repeated jobs but increase the usability and reliability of the system. Therefore, FDA is used to improve the completeness of whole mission control system’s quality. The FDA is applied to the real flight dynamics system of a geostationary satellite, COMS and the experimental test is performed. The experimental result shows the stability and reliability of the mission control operations through the automatic job control.

  3. Models of the heat dynamics of solar collectors for performance testing

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Perers, Bengt

    2011-01-01

    accurate estimates of parameters in physical models. The applied method is described by Kristensen et al. (2004) and implemented in the software CTSM1. Examples of successful applications of the method includes modelling the of the heat dynamics of integrated photo-voltaic modules (Friling et al., 2009...... rig is described in Fan et al. (2009). The modelling technique provides uncertainty estimates such as confidence intervals for the parameters, and furthermore enables statistical validation of the results. Such tests can also facilitate procedures for selecting the best model to use, which is a very......The need for fast and accurate performance testing of solar collectors is increasing. This paper describes a new technique for performance testing which is based on non-linear continuous time models of the heat dynamics of the collector. It is shown that all important performance parameters can...

  4. The Influence of Instrumented Striker Configuration on the Results of Dynamic Toughness Testing

    Energy Technology Data Exchange (ETDEWEB)

    Lucon, E.

    2008-09-15

    Several studies are available on the influence of the edge radius of instrumented strikers (ASTM - 8 mm or ISO - 2 mm) on the results of both non instrumented and instrumented Charpy tests. This paper investigates the effect of using either a 2 mm or a 8 mm striker when performing dynamic toughness tests at impact loading rates on precracked Charpy specimens. Existing data from tests run in the ductile-to-brittle region (dynamic Master Curve reference temperature) and in the upper shelf regime (ductile initiation fracture toughness and crack resistance curves) have been analyzed. The results show that 2 mm strikers tend to yield lower cleavage fracture toughness in the transition region (although the effect cannot be considered statistically significant), whereas the influence of striker configuration is negligible in the upper shelf regime when data are generated using the low-blow multiple-specimen technique.

  5. Research on Wind Turbine Generator Dynamic Reliability Test System Based on Feature Recognition

    Directory of Open Access Journals (Sweden)

    Bin Wang

    2013-09-01

    Full Text Available Wind power resource development is increasingly becoming the focus of the current research and development in various countries' relevant scientific institutions. To make sure the secure and reliable operation of wind turbine generator, the study develops the wind turbine generator dynamic reliability test system. When the fault of gearbox and spindle occurs, their features of vibration signals are special. According to the feature recognition technology, the application of time and frequency domain model identification method has practical significance to the test system. Based on Bayesian network fault diagnosis method, the vibration feature recognition system of wind turbine generator is constructed. Finally, the paper uses GPRS technology to realize the wireless transmission of operation information. The wind turbine generator dynamic reliability test system is built based on GPRS technology to realize automatic control and remote intelligent monitoring and to ensure the safe and stable operation of wind farms.

  6. Testing for contagion under asymmetric dynamics: Evidence from the stock markets between US and Taiwan

    Science.gov (United States)

    Wang, Kuan-Min; Nguyen Thi, Thanh-Binh

    2007-03-01

    This article is an attempt to test, through the use of forward forecasting test on dynamic conditional correlation (DCC), for contagion between Taiwan and US stocks under asymmetry. The process includes three steps. The first step uses the iterated cumulative sums of squares (ICSS) algorithm to detect the structural breaks of market return. The second step creates dummy variables for breaks, estimates EGARCH model of conditional generalized error distribution, and computes dynamic conditional correlation coefficients of DCC multivariate GARCH model. The third step employs one-step and N-step forecast test to check for contagion effect. The evidences prove the asymmetric leverage effect of Taiwan weighted stock index and New York-NYSE Composite Index. Interestingly, we discovered that there are two kinds of contagion, “positive” and “negative”, between markets.

  7. Site Earthquake Characteristics and Dynamic Parameter Test of Phase Ⅲ Qinshan Nuclear Power Engineering

    Institute of Scientific and Technical Information of China (English)

    ZHOV Nian-qing; ZHAO Zai-li; QIN Min

    2009-01-01

    The earthquake characteristics and geological structure of the site to sitting the Qinshan Nuclear Power Station are closely related. According to site investigation drilling, sampling, seismic sound logging wave test in single-hole and cross-hole, laboratory wave velocity test of intact rock, together with analysis of the site geological conditions, the seismic wave test results of the site between strata lithology and the geologic structure were studied. The relationships of seismic waves with the site lithology and the geologic structure were set up.The dynamic parameters of different grades of weathering profile were deduced. The results assist the seismic design of Phase Ⅲ Qinshan Nuclear Power Plant, China.

  8. PV inverter test setup for European efficiency, static and dynamic MPPT efficiency evaluation

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Valentini, Massimo;

    2008-01-01

    This paper concerns the evaluation of performance of grid-connected PV inverters in terms of conversion efficiency, European efficiency, static and dynamic MPP efficiency. Semi-automated tests were performed in the PV laboratory of the Institute of Energy Technology at the Aalborg University...... (Denmark) on a commercial transformerless PV inverter. Thanks to the available experimental test setups, that provide the required high measuring accuracy, and the developed PV simulator, which is required for MPPT performance evaluation, PV Inverters can be pretested before being tested by accredited...

  9. Nonlinear elastic behavior of rocks revealed by dynamic acousto-elastic testing

    Science.gov (United States)

    Shokouhi, Parisa; Riviere, Jacques; Guyer, Robert; Johnson, Paul

    2017-04-01

    Nonlinear elastic behavior of rocks is studied at the laboratory scale with the goal of illuminating observations at the Earth scale, for instance during strong ground motion and earthquake slip processes. A technique called Dynamic Acousto-Elastic Testing (DAET) is used to extract the nonlinear elastic response of disparate rocks (sandstone, granite and soapstone). DAET is the dynamic analogous to standard (quasi-static) acousto-elastic testing. It consists in measuring speed of sound with high-frequency low amplitude pulses (MHz range) across the sample while it is dynamically loaded with a low frequency, large amplitude resonance (kHz range). This particular configuration provides the instantaneous elastic response over a full dynamic cycle and reveals unprecedented details: instantaneous softening, tension/compression asymmetry as well as hysteretic behaviors. The strain-induced modulation of ultrasonic pulse velocities ('fast dynamics') is analyzed to extract nonlinearity parameters. A projection method is used to extract the harmonic content and a careful comparison of the fast dynamics response is made. In order to characterize the rate of elastic recovery ('slow dynamics'), we continue to monitor the ultrasonic wave velocity for about 30 minutes after the low-frequency resonance is turned off. In addition, the frequency, pressure and humidity dependences of the nonlinear parameters are reported for a subset of samples. We find that the nonlinear components can be clustered into two categories, which suggests that two main mechanisms are at play. The first one, related to the second harmonic, is likely related to the opening/closing of microstructural features such as cracks and grain/grain contacts. In contrast, the second mechanism is related to all other nonlinear parameters (transient softening, hysteresis area and higher order harmonics) and may arise from shearing mechanisms at grain interfaces.

  10. Numerical and Experimental Dynamic Analysis of IC Engine Test Beds Equipped with Highly Flexible Couplings

    Directory of Open Access Journals (Sweden)

    M. Cocconcelli

    2017-01-01

    Full Text Available Driveline components connected to internal combustion engines can be critically loaded by dynamic forces due to motion irregularity. In particular, flexible couplings used in engine test rig are usually subjected to high levels of torsional oscillations and time-varying torque. This could lead to premature failure of the test rig. In this work an effective methodology for the estimation of the dynamic behavior of highly flexible couplings in real operational conditions is presented in order to prevent unwanted halts. The methodology addresses a combination of numerical models and experimental measurements. In particular, two mathematical models of the engine test rig were developed: a torsional lumped-parameter model for the estimation of the torsional dynamic behavior in operative conditions and a finite element model for the estimation of the natural frequencies of the coupling. The experimental campaign addressed torsional vibration measurements in order to characterize the driveline dynamic behavior as well as validate the models. The measurements were achieved by a coder-based technique using optical sensors and zebra tapes. Eventually, the validated models were used to evaluate the effect of design modifications of the coupling elements in terms of natural frequencies (torsional and bending, torsional vibration amplitude, and power loss in the couplings.

  11. A modern artificial intelligence Playware art tool for psychological testing of group dynamics

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2015-01-01

    and the psychological findings. We describe the modern artificial intelligence implementation of this instrument. Between an art piece and a psychological test, at a first cognitive analysis, it seems to be a promising research tool. In the discussion we speculate about potential industrial applications, as well.......We describe an artistic method used for the psychological analysis of group dynamics. The design of the artistic system, which mediates group dynamics, emerges from our studies of modular Playware and remixing Playware. Inspired from remixing modular Playware, where users remix samples in the form...

  12. Verification of nonlinear dynamic structural test results by combined image processing and acoustic analysis

    Science.gov (United States)

    Tene, Yair; Tene, Noam; Tene, G.

    1993-08-01

    An interactive data fusion methodology of video, audio, and nonlinear structural dynamic analysis for potential application in forensic engineering is presented. The methodology was developed and successfully demonstrated in the analysis of heavy transportable bridge collapse during preparation for testing. Multiple bridge elements failures were identified after the collapse, including fracture, cracks and rupture of high performance structural materials. Videotape recording by hand held camcorder was the only source of information about the collapse sequence. The interactive data fusion methodology resulted in extracting relevant information form the videotape and from dynamic nonlinear structural analysis, leading to full account of the sequence of events during the bridge collapse.

  13. Case Report: Penetrating Cardiac Injury

    Directory of Open Access Journals (Sweden)

    Adem Grbolar

    2013-10-01

    Full Text Available Summary: Penetrating cardiac injurys caused by gunshots and penetrating tools have high mortality rates. The way of injury, how the cardiac area is effected and the presence of cardiac tamponadecauses mortality in different rates. However the better treatment quality of hospitals, increasingoperative techniques, and internel care unit quality has not been change during the years. Searching the literature, we want to present a 42 years old male patient whowas injured by knife and had a 1 cm skin wound on chest with cardiac tamponade. After sternotomy a 7 cm laseration was observed in heart. Cardioraphy was performed.

  14. Dinâmica da resistência à penetração de um Latossolo Vermelho da Microrregião de Goiânia, GO Penetration resistance dynamics of a Dark Red Latosol of Microregion of Goiania, State of Goias, Brazil

    Directory of Open Access Journals (Sweden)

    Geraldo C. Oliveira

    2007-06-01

    Full Text Available O objetivo principal deste estudo é avaliar o efeito da umidade e da densidade do solo na dinâmica da resistência à penetração de um Latossolo Vermelho da Microrregião de Goiânia, GO. Foram amostradas: área sob pastejo rotacionado, na 1 Touceira e 2 Entre touceira; 3 Barreirão (área de renovação de pastagem; 4 Área sob Pivô Central; 5 Área sob Plantio Direto; 6 Mata. Realizaram-se, em cada área, testes de penetrometria em três diferentes teores de umidade no solo e se coletaram seis amostras não deformadas, nas profundidades de 0-5 e 20-30 cm em anéis volumétricos, para determinação da densidade do solo, capacidade de campo, volume total de poros, microporosidade e macroporosidade do solo. Os tratamentos afetaram, de forma diferenciada todos os atributos analisados; pelo teste de penetrometria, o diagnóstico mostrou-se eficiente quando acompanhado da análise de densidade do solo e da umidade; o Latossolo em estudo deve oferecer alguma restrição ao desenvolvimento das plantas cultivadas nas áreas sob pivô central e pastejo rotacionado, quando o solo se encontrar em baixas condições de umidade.This study aims to evaluate soil moisture and bulk density effects on penetration resistance dynamics of Dark Red Latosol, located in the Microregion of Goiânia, Goias. Area under rotating pasture were sampled 1 in lines and 2 between lines; 3 pasture renewal area; 4 area under Central Pivot; 5 area under no-tillage and 6 forest. Penetrometry tests were done for three different soil moistures, and six undisturbed soil samples were collected in layers of 0-5 and 20-30 cm for determination of bulk density, soil moisture at field capacity, total porosity, and micro and macro-porosity. Soil use and management affected in a differentiated way, all analyzed soil attributes; penetrometry diagnosis test was efficient when accompanied by bulk density and soil moisture analysis; the Dark Red Latosol studied appears to offer a

  15. Ground-based testing of the dynamics of flexible space structures using band mechanisms

    Science.gov (United States)

    Yang, L. F.; Chew, Meng-Sang

    1991-01-01

    A suspension system based on a band mechanism is studied to provide the free-free conditions for ground based validation testing of flexible space structures. The band mechanism consists of a noncircular disk with a convex profile, preloaded by torsional springs at its center of rotation so that static equilibrium of the test structure is maintained at any vertical location; the gravitational force will be directly counteracted during dynamic testing of the space structure. This noncircular disk within the suspension system can be configured to remain unchanged for test articles with the different weights as long as the torsional spring is replaced to maintain the originally designed frequency ratio of W/k sub s. Simulations of test articles which are modeled as lumped parameter as well as continuous parameter systems, are also presented.

  16. Low-Speed Dynamic Wind Tunnel Test Analysis of a Generic 53 Degree Swept UCAV Configuration With Controls

    Science.gov (United States)

    Vicroy, Dan D.; Huber, Kerstin C.; Rohlf, Detlef; Loser, Thomas

    2014-01-01

    Several static and dynamic forced-motion wind tunnel tests have been conducted on a generic unmanned combat air vehicle (UCAV) configuration with a 53deg swept leading edge. These tests are part of an international research effort to assess and advance the state-of-art of computational fluid dynamics (CFD) methods to predict the static and dynamic stability and control characteristics for this type of configuration. This paper describes the dynamic forced motion data collected from two different models of this UCAV configuration as well as analysis of the control surface deflections on the dynamic forces and moments.

  17. Optimal Controller Tested for a Magnetically Suspended Five-Axis Dynamic Spin Rig

    Science.gov (United States)

    Choi, Benjamin B.

    2003-01-01

    NASA Glenn Research Center's Structural Mechanics and Dynamics Branch has developed a fully suspended magnetic bearing system for their Dynamic Spin Rig, which performs vibration tests of turbomachinery blades and components under spinning conditions in a vacuum. Two heteropolar radial magnetic bearings and a thrust magnetic bearing and the associated control system were integrated into the Dynamic Spin Rig to provide magnetic excitation as well as noncontact magnetic suspension of the 35-lb vertical rotor with blades to induce turbomachinery blade vibration (ref. 1). The new system can provide longer run times at higher speeds and larger vibration amplitudes for rotating blades. Also, it was proven that bearing mechanical life was substantially extended and flexibility was increased in the excitation orientation (direction and phasing).

  18. Dynamic test on waste heat recovery system with organic Rankine cycle

    Institute of Scientific and Technical Information of China (English)

    王志奇; 刘力文; 夏小霞; 周乃君

    2014-01-01

    Dynamic performance is important to the controlling and monitoring of the organic Rankine cycle(ORC) system so to avoid the occurrence of unwanted conditions. A small scale waste heat recovery system with organic Rankine cycle was constructed and the dynamic behavior was presented. In the dynamic test, the pump was stopped and then started. In addition, there was a step change of the flue gas volume flow rate and the converter frequency of multistage pump, respectively. The results indicate that the working fluid flow rate has the shortest response time, followed by the expander inlet pressure and the expander inlet temperature. The operation frequency of pump is a key parameter for the ORC system. Due to a step change of pump frequency (39.49−35.24 Hz), the expander efficiency and thermal efficiency drop by 16%and 21%within 2 min, respectively. Besides, the saturated mixture can lead to an increase of the expander rotation speed.

  19. A state of the art on penetration failure estimation under external vessel cooling

    Energy Technology Data Exchange (ETDEWEB)

    Min, B. T.; Park, R. J.; Kang, K. H.; Cho, Y. R.; Kim, J. W.; Kim, S. B.; Park, S. Y.; Lee, K. Y

    2000-04-01

    A state of the art on penetration failure was reviewed and analyzed to establish the direction of the experimental program in the KNGR and to decide the test section design. The interaction between the corium and the reactor vessel and the corium behavior in the lower plenum of the reactor vessel were analyzed to investigate the penetration effect on severe accident progression, and the TMI-2 accident was investigated in the point of penetration failure. Theoretical model and experiment results on penetration failure under the severe accident were investigated and reviewed to establish the direction of the experimental program on the estimation of the penetration failure in the KNGR. These results were compared with the TMI-2 results. The existing test facilities on penetration failure were investigated and reviewed to decide the test section design. It can be said from the state of the art review that penetration in the lower plenum of the reactor vessel is a week point in the reactor vessel failure under the severe accident, but the reactor vessel may not be failed by penetration failure in condition with the coolant supply to the penetration. Since the penetration is different with reactor types and there is no study on estimation of the penetration welding, it is necessary to investigate failure or not of the penetration in condition with external vessel cooling to maintain the reactor vessel integrity in KNGR. In the present experimental program on the integrity estimation of the KNGR penetration, the aluminum oxide melt by thermite reaction and the test section with one penetration of the real size and real material were selected. The melt mass, the pressure of the system, and the vessel geometry were selected as an experimental parameter. (author)

  20. A state of the art on penetration failure estimation under external vessel cooling

    Energy Technology Data Exchange (ETDEWEB)

    Min, B. T.; Park, R. J.; Kang, K. H.; Cho, Y. R.; Kim, J. W.; Kim, S. B.; Park, S. Y.; Lee, K. Y

    2000-04-01

    A state of the art on penetration failure was reviewed and analyzed to establish the direction of the experimental program in the KNGR and to decide the test section design. The interaction between the corium and the reactor vessel and the corium behavior in the lower plenum of the reactor vessel were analyzed to investigate the penetration effect on severe accident progression, and the TMI-2 accident was investigated in the point of penetration failure. Theoretical model and experiment results on penetration failure under the severe accident were investigated and reviewed to establish the direction of the experimental program on the estimation of the penetration failure in the KNGR. These results were compared with the TMI-2 results. The existing test facilities on penetration failure were investigated and reviewed to decide the test section design. It can be said from the state of the art review that penetration in the lower plenum of the reactor vessel is a week point in the reactor vessel failure under the severe accident, but the reactor vessel may not be failed by penetration failure in condition with the coolant supply to the penetration. Since the penetration is different with reactor types and there is no study on estimation of the penetration welding, it is necessary to investigate failure or not of the penetration in condition with external vessel cooling to maintain the reactor vessel integrity in KNGR. In the present experimental program on the integrity estimation of the KNGR penetration, the aluminum oxide melt by thermite reaction and the test section with one penetration of the real size and real material were selected. The melt mass, the pressure of the system, and the vessel geometry were selected as an experimental parameter. (author)

  1. Penetration and lateral diffusion characteristics of polycrystalline graphene barriers

    Science.gov (United States)

    Yoon, Taeshik; Mun, Jeong Hun; Cho, Byung Jin; Kim, Taek-Soo

    2013-12-01

    We report penetration and lateral diffusion behavior of environmental molecules on synthesized polycrystalline graphene. Penetration occurs through graphene grain boundaries resulting in local oxidation. However, when the penetrated molecules diffuse laterally, the oxidation region will expand. Therefore, we measured the lateral diffusion rate along the graphene-copper interface for the first time by the environment-assisted crack growth test. It is clearly shown that the lateral diffusion is suppressed due to the high van der Waals interaction. Finally, we employed bilayer graphene for a perfect diffusion barrier facilitated by decreased defect density and increased lateral diffusion path.We report penetration and lateral diffusion behavior of environmental molecules on synthesized polycrystalline graphene. Penetration occurs through graphene grain boundaries resulting in local oxidation. However, when the penetrated molecules diffuse laterally, the oxidation region will expand. Therefore, we measured the lateral diffusion rate along the graphene-copper interface for the first time by the environment-assisted crack growth test. It is clearly shown that the lateral diffusion is suppressed due to the high van der Waals interaction. Finally, we employed bilayer graphene for a perfect diffusion barrier facilitated by decreased defect density and increased lateral diffusion path. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr03849a

  2. 基于压汞实验的粘土微孔隙分布特征研究%Study on distribution of clay void based on mercury penetration test

    Institute of Scientific and Technical Information of China (English)

    唐华瑞; 韩灵杰; 王杏杏; 高凌霞

    2016-01-01

    为了研究粘土微观结构特征与其力学形成条件的关系,对某粘土进行了重塑和一维再固结。在此基础上,采用切块法获得了微结构观察样品,并采用冷冻干燥方法对微结构样品进行了干燥,进而采用能谱分析方法确定了土样的化学矿物成分,采用压汞实验测试了粘土的孔径分布。对不同方向上的孔径分布特征与其形成过程之间的关系进行了分析,结果表明孔径分布特征与试样的方向性具有密切关系。研究成果有助于进一步揭示土微结构与其力学性质之间的内在联系。%In order to study the relationship between the microstructure of clay and its mechanical properties, some clay taken from a stratum has been remodeled and one-dimensionally reconsolidat-ed. On the basis, microstructure observation samples were obtained by the one-dimensional consoli-dation, and the freeze-drying method was applied to dry the samples. Then the method of energy spectrum analysis was used to determine the chemical composition of the soil samples, and the pore size distribution of clay was tested by a mercury penetration experiment. Analysis on the relationship between the pore distribution in different directions and its formation process shows that the pore dis-tribution is closely related to the direction of the samples. The research can further reveal the rela-tionship between microstructure of clay and its mechanical properties.

  3. 3D shoulder kinematics for static vs dynamic and passive vs active testing conditions.

    Science.gov (United States)

    Robert-Lachaine, Xavier; Allard, Paul; Godbout, Véronique; Begon, Mickael

    2015-09-18

    Shoulder motion analysis provides clinicians with references of normal joint rotations. Shoulder joints orientations assessment is often based on series of static positions, while clinicians perform either passive or active tests and exercises mostly in dynamic. These conditions of motion could modify joint coordination and lead to discrepancies with the established references. Hence, the objective was to evaluate the influence of static vs dynamic and passive vs active testing conditions on shoulder joints orientations. Twenty asymptomatic subjects setup with 45 markers on the upper limb and trunk were tracked by an optoelectronic system. Static positions (30°, 60°, 90° and 120° of thoracohumeral elevation) and dynamic motion both in active condition and passively mobilised by an examiner were executed. Three-dimensional sternoclavicular, acromioclavicular, scapulothoracic and glenohumeral joint angles (12 in total) representing the distal segment orientation relative to the proximal segment orientation were estimated using a shoulder kinematical chain model. Separate four-way repeated measures ANOVA were applied on the 12 joint angles with factors of static vs dynamic, passive vs active, thoracohumeral elevation angle (30°, 60°, 90° and 120°) and plane of elevation (frontal and sagittal). Scapulothoracic lateral rotation progressed more during arm elevation in static than in dynamic gaining 4.2° more, and also in passive than in active by 6.6°. Glenohumeral elevation increased more during arm elevation in active than in passive by 4.4°. Shoulder joints orientations are affected by the testing conditions, which should be taken into consideration for data acquisition, inter-study comparison or clinical applications.

  4. Simulation of IST Turbomachinery Power-Neutral Tests with the ANL Plant Dynamics Code

    Energy Technology Data Exchange (ETDEWEB)

    Moisseytsev, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Sienicki, J. J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-12-13

    The validation of the Plant Dynamics Code (PDC) developed at Argonne National Laboratory (ANL) for the steady-state and transient analysis of supercritical carbon dioxide (sCO2) systems has been continued with new test data from the Naval Nuclear Laboratory (operated by Bechtel Marine Propulsion Corporation) Integrated System Test (IST). Although data from three runs were provided to ANL, only two of the data sets were analyzed and described in this report. The common feature of these tests is the power-neutral operation of the turbine-compressor shaft, where no external power through the alternator was provided during the tests. Instead, the shaft speed was allowed to change dictated by the power balance between the turbine, the compressor, and the power losses in the shaft. The new test data turned out to be important for code validation for several reasons. First, the power-neutral operation of the shaft allows validation of the shaft dynamics equations in asynchronous mode, when the shaft is disconnected from the grid. Second, the shaft speed control with the compressor recirculation (CR) valve not only allows for testing the code control logic itself, but it also serves as a good test for validation of both the compressor surge control and the turbine bypass control actions, since the effect of the CR action on the loop conditions is similar for both of these controls. Third, the varying compressor-inlet temperature change test allows validation of the transient response of the precooler, a shell-and-tube heat exchanger. The first transient simulation of the compressor-inlet temperature variation Test 64661 showed a much slower calculated response of the precooler in the calculations than the test data. Further investigation revealed an error in calculating the heat exchanger tube mass for the PDC dynamic equations that resulted in a slower change in the tube wall temperature than measured. The transient calculations for both tests were done in two steps. The

  5. The Penetration of Shaped Charges

    Institute of Scientific and Technical Information of China (English)

    Wu Mingde

    1996-01-01

    @@ In order to get the best perforating effect, many facts have to be considered. Perforating job is often design by computer. A perforating engineer has to decide the perforating technology and procedure, the gun and charge system, the shot density and phasing, the penetration and hole size, etc.

  6. Stylet penetration activities by aphids

    NARCIS (Netherlands)

    Tjallingii, W.F.

    1985-01-01

    The composition of stylet penetration behaviour in aphids and its possible role in food-plant selection is the subject of these studies. Evidence is presented that the labium is devoid of external chemoreceptors (Chapter 1). In addition to other morphological data (Wensler & Filshie, 1969; Wensler,

  7. Penetration Physics of Armor Glass

    Science.gov (United States)

    2009-11-30

    Penetration Response of Borosilicate Glass during Short Rod Impact”, Proc. 23rd Int. Symp. Ballistics, 2, 1251-1258, Graficas Couche, Madrid, Spain (2007...glass”, Proc. 23rd Int. Symp. Ballistics, 2, 1049-1056, Graficas Couche, Madrid, Spain (2007). 8D. R. Curran, “Comparison of Mesomechanical and

  8. Dynamic compressive properties obtained from a split Hopkinson pressure bar test of Boryeong shale

    Science.gov (United States)

    Kang, Minju; Cho, Jung-Woo; Kim, Yang Gon; Park, Jaeyeong; Jeong, Myeong-Sik; Lee, Sunghak

    2016-09-01

    Dynamic compressive properties of a Boryeong shale were evaluated by using a split Hopkinson pressure bar, and were compared with those of a Hwangdeung granite which is a typical hard rock. The results indicated that the dynamic compressive loading reduced the resistance to fracture. The dynamic compressive strength was lower in the shale than in the granite, and was raised with increasing strain rate by microcracking effect as well as strain rate strengthening effect. Since the number of microcracked fragments increased with increasing strain rate in the shale having laminated weakness planes, the shale showed the better fragmentation performance than the granite at high strain rates. The effect of transversely isotropic plane on compressive strength decreased with increasing strain rate, which was desirable for increasing the fragmentation performance. Thus, the shale can be more reliably applied to industrial areas requiring good fragmentation performance as the striking speed of drilling or hydraulic fracturing machines increased. The present dynamic compressive test effectively evaluated the fragmentation performance as well as compressive strength and strain energy density by controlling the air pressure, and provided an important idea on which rock was more readily fragmented under dynamically processing conditions such as high-speed drilling and blasting.

  9. Molecular dynamics test of the Brownian description of Na(+) motion in water

    Science.gov (United States)

    Wilson, M. A.; Pohorille, A.; Pratt, L. R.

    1985-01-01

    The present paper provides the results of molecular dynamics calculations on a Na(+) ion in aqueous solution. Attention is given to the sodium-oxygen and sodium-hydrogen radial distribution functions, the velocity autocorrelation function for the Na(+) ion, the autocorrelation function of the force on the stationary ion, and the accuracy of Brownian motion assumptions which are basic to hydrodynamic models of ion dyanmics in solution. It is pointed out that the presented calculations provide accurate data for testing theories of ion dynamics in solution. The conducted tests show that it is feasible to calculate Brownian friction constants for ions in aqueous solutions. It is found that for Na(+) under the considered conditions the Brownian mobility is in error by only 60 percent.

  10. Dynamic Flight Simulation of aircraft and its comparison to Flight tests

    Directory of Open Access Journals (Sweden)

    Reza Khaki

    2015-09-01

    Full Text Available Nowadays obtaining data for air vehicles researches and analyses is very expensive and risky through the flight tests. Therefore using flight simulation is usually used for the mentioned researches by aerospace science researchers. In this paper, dynamic flight simulation has been performed by airplane nonlinear equations modelling. In these equations, aerodynamic coefficients and stability derivatives have an important role. Therefore, the stability derivatives for typical aircraft are calculated on various flight conditions by analytical and numerical methods. Flight conditions include of Mach number, altitude, angle of attack, control surfaces and CG position variations. The obtained derivatives are used in the form of look up table for dynamic flight simulation and virtual flight. In order to validate the simulation results, the under investigation maneuvres parameters are recorded during many real flights. The obtained data from flight tests are compared with the outputs of flight simulations. The results indicate that less than 13% differences are found in different parts of the maneuvres.

  11. [Mes differ by positioning: empirical testing of decentralized dynamics of the self].

    Science.gov (United States)

    Mizokami, Shinichi

    2013-10-01

    The present study empirically tested the conceptualization of the decentralized dynamics of the self proposed by Hermans & Kempen (1993), which they developed theoretically and from clinical cases, not from large samples of empirical data. They posited that worldviews and images of the self could vary by positioning even in the same individual, and denied that the ego was an omniscient entity that knew and controlled all aspects of the self (centralized ego). Study 1 tested their conceptualization empirically with 47 university students in an experimental group and 17 as a control group. The results showed that the scores on the Rosenberg's self-esteem scale and images of the Mes in the experimental group significantly varied by positioning, but those in the control group did not. Similar results were found in Study 2 with a sample of 120 university students. These results empirically supported the conceptualization of the decentralized dynamics of the self.

  12. NASA solar dynamic ground test demonstration (GTD) program and its application to space nuclear power

    Science.gov (United States)

    Harper, William B.; Shaltens, Richard K.

    1993-01-01

    Closed Brayton cycle power conversion systems are readily adaptable to any heat source contemplated for space application. The inert gas working fluid can be used directly in gas-cooled reactors and coupled to a variety of heat sources (reactor, isotope or solar) by a heat exchanger. This point is demonstrated by the incorporation in the NASA 2 kWe Solar Dynamic (SD) Space Power Ground Test Demonstration (GTD) Program of the turboalternator-compressor and recuperator from the Brayton Isotope Power System (BIPS) program. This paper will review the goals and status of the SD GTD Program, initiated in April 1992. The performance of the BIPS isotope-heated system will be compared to the solar-heated GTD system incorporating the BIPS components and the applicability of the GTD test bed to dynamics space nuclear power R&D will be discussed.

  13. Supersonic Flight Dynamics Test 1 - Post-Flight Assessment of Simulation Performance

    Science.gov (United States)

    Dutta, Soumyo; Bowes, Angela L.; Striepe, Scott A.; Davis, Jody L.; Queen, Eric M.; Blood, Eric M.; Ivanov, Mark C.

    2015-01-01

    NASA's Low Density Supersonic Decelerator (LDSD) project conducted its first Supersonic Flight Dynamics Test (SFDT-1) on June 28, 2014. Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics codes used to simulate and predict the flight performance and Monte Carlo analysis was used to characterize the potential flight conditions experienced by the test vehicle. This paper compares the simulation predictions with the reconstructed trajectory of SFDT-1. Additionally, off-nominal conditions seen during flight are modeled in post-flight simulations to find the primary contributors that reconcile the simulation with flight data. The results of these analyses are beneficial for the pre-flight simulation and targeting of the follow-on SFDT flights currently scheduled for summer 2015.

  14. Proposition and Test of the One Scale of the Environmental Dynamism, Complexity and Munificence

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Carvalho

    2014-12-01

    Full Text Available Considering the concernment that the strategy area has about the environment and its impact on organization, this paper discuss about the environment mensuration. Its aim is build and validate scales of mensuration of the perceived dynamism, complexity and munificence dimensions. The scales were built on the revised theory, applied to a sample of 170 Brazilian hotel managers and validate under the factorial analysis with tests of reliability trough communalities, variance explained, Bartlet’s sphericity test, Cronbach’s Alpha, correlation analysis, and split half method. After the Varimax rotation, the constructs showed independent and orthogonal among them. The complexity construct was built by gaining information and environment understanding difficult, by information dispersion and by its unpredictability. Dynamism was validate as the variability in the components of the competitive environments, while the munificence construct reflect the availability of existing resources, the growing of the available resources, the existing of more opportunities than threats, and the growing of the market.

  15. Molecular dynamics test of the Brownian description of Na(+) motion in water

    Science.gov (United States)

    Wilson, M. A.; Pohorille, A.; Pratt, L. R.

    1985-01-01

    The present paper provides the results of molecular dynamics calculations on a Na(+) ion in aqueous solution. Attention is given to the sodium-oxygen and sodium-hydrogen radial distribution functions, the velocity autocorrelation function for the Na(+) ion, the autocorrelation function of the force on the stationary ion, and the accuracy of Brownian motion assumptions which are basic to hydrodynamic models of ion dyanmics in solution. It is pointed out that the presented calculations provide accurate data for testing theories of ion dynamics in solution. The conducted tests show that it is feasible to calculate Brownian friction constants for ions in aqueous solutions. It is found that for Na(+) under the considered conditions the Brownian mobility is in error by only 60 percent.

  16. A study on dynamic response of slopes under wave action using simulation tests

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    After the erection of the Three Gorges Dam, the water level of Yangtze River will reach 175 m, and the average wave crest will be up to 1 m. Therefore the wave action cannot be neglected for the slope stability. Through simulation tests, the waveinduced dynamic response of the slope is analyzed. The soil body is taken as linear elastic body when it has a small deformation under the small wave action. Based on tests, the excess pore pressure and slope displacement under the loading in different wave period are analyzed. The ratio of dynamic strength and static strength to the breaking process of the slope is discussed. It is demonstrated that smaller wave period gives rise to a larger strain of the slope under the same stress. At different depth of water, different weakness effect on the stability of the soil slope is observed and the slope has an adaptability to the wave action to some extent.

  17. Dynamic testing of learning potential in adults with cognitive impairments: A systematic review of methodology and predictive value.

    Science.gov (United States)

    Boosman, Hileen; Bovend'Eerdt, Thamar J H; Visser-Meily, Johanna M A; Nijboer, Tanja C W; van Heugten, Caroline M

    2016-09-01

    Dynamic testing includes procedures that examine the effects of brief training on test performance where pre- to post-training change reflects patients' learning potential. The objective of this systematic review was to provide clinicians and researchers insight into the concept and methodology of dynamic testing and to explore its predictive validity in adult patients with cognitive impairments. The following electronic databases were searched: PubMed, PsychINFO, and Embase/Medline. Of 1141 potentially relevant articles, 24 studies met the inclusion criteria. The mean methodological quality score was 4.6 of 8. Eleven different dynamic tests were used. The majority of studies used dynamic versions of the Wisconsin Card Sorting Test. The training mostly consisted of a combination of performance feedback, reinforcement, expanded instruction, or strategy training. Learning potential was quantified using numerical (post-test score, difference score, gain score, regression residuals) and categorical (groups) indices. In five of six longitudinal studies, learning potential significantly predicted rehabilitation outcome. Three of four studies supported the added value of dynamic testing over conventional testing in predicting rehabilitation outcome. This review provides preliminary support that dynamic tests can provide a valuable addition to conventional tests to assess patients' abilities. Although promising, there was a large variability in methods used for dynamic testing and, therefore, it remains unclear which dynamic testing methods are most appropriate for patients with cognitive impairments. More research is warranted to further evaluate and refine dynamic testing methodology and to further elucidate its predictive validity concerning rehabilitation outcomes relative to other cognitive and functional status indices.

  18. Mathematical Modeling of Electrolyte Flow Dynamic Patterns and Volumetric Flow Penetrations in the Flow Channel over Porous Electrode Layered System in Vanadium Flow Battery with Serpentine Flow Field Design

    OpenAIRE

    Ke, Xinyou; Prahl, Joseph M.; Alexander, J. Iwan D.; Savinell, Robert F.

    2016-01-01

    In this work, a two-dimensional mathematical model is developed to study the flow patterns and volumetric flow penetrations in the flow channel over the porous electrode layered system in vanadium flow battery with serpentine flow field design. The flow distributions at the interface between the flow channel and porous electrode are examined. It is found that the non-linear pressure distributions can distinguish the interface flow distributions under the ideal plug flow and ideal parabolic fl...

  19. The long-term reliability of static and dynamic Quantitative Sensory Testing in healthy individuals.

    Science.gov (United States)

    Marcuzzi, Anna; Wrigley, Paul J; Dean, Catherine M; Adams, Roger; Hush, Julia M

    2017-03-21

    Quantitative sensory tests (QST) have been increasingly used to investigate alterations in somatosensory function in a wide range of painful conditions. The interpretation of these findings is based on the assumption that the measures are stable and reproducible. To date, reliability of QST has been investigated for short test-retest intervals. The aim of this study was to investigate the long-term reliability of a multimodal QST assessment in healthy people, with testing conducted on three occasions over 4-months. Forty-two healthy people were enrolled in the study. Static and dynamic tests were performed, including cold and heat pain threshold (CPT, HPT), mechanical wind up (WUR), pressure pain threshold (PPT), two-point discrimination (TPD) and conditioned pain modulation (CPM). Systematic bias, relative reliability and agreement were analysed using repeated measure ANOVA, intraclass correlation coefficients (ICCs3,1) and standard error of the measurement (SEM), respectively. Static QST (CPT, HPT, PPT and TPD) showed good to excellent reliability (ICCs: 0.68 to 0.90). Dynamic QST (WUR and CPM) showed poor to good reliability (ICCs: 0.35 to 0.61). A significant linear decrease over time was observed for mechanical QST at the back (PPT and TPD) and for CPM (p<0.01). Static QST were stable over a period of 4 months; however, a small systematic decrease over time has been observed for mechanical QST. Dynamic QST showed considerable variability over time; in particular, CPM using PPT as the test stimulus did not show adequate reliability, suggesting that this test paradigm may be less useful for monitoring individuals over time.

  20. Test and simulation of dynamic phase compensation from Mita-Teknik A/S

    DEFF Research Database (Denmark)

    Sørensen, Poul Ejnar; Iov, F.; Blaabjerg, F.

    2004-01-01

    This report describes the test of a dynamic phase compensation unit for a wind turbine with directly connected induction generators. The compensation unit is based on thyristor switched capacitors, where conventional wind turbine compensations usemechanical contactors to switch the capacitors. Th....... The influence on power quality analysed, and influence on component lifetime is discussed. Besides, simulation models in Matlab/Simulink are presented, including a flickermeter model....

  1. Test and simulation of dynamic phase compensation from Mita-Teknik A/S

    DEFF Research Database (Denmark)

    Soerensen, P.; Iov, Florin; Blaabjerg, Frede

    This report describes the test of a dynamic phase compensation unit or a wind turbine with directly connected induction generators. The compensation unit is based on thyristor switched capacitors, where conventional wind turbine compensations use mechanical contactors to switch the capacitors. Th....... The influence on power quality analysed, and influence on component lifetime is discussed. Besides, simulation models in Matlab/Simulink are presented, including a flickermeter model....

  2. A Novel Approach for Dynamic Testing of Total Hip Dislocation under Physiological Conditions.

    Science.gov (United States)

    Herrmann, Sven; Kluess, Daniel; Kaehler, Michael; Grawe, Robert; Rachholz, Roman; Souffrant, Robert; Zierath, János; Bader, Rainer; Woernle, Christoph

    2015-01-01

    Constant high rates of dislocation-related complications of total hip replacements (THRs) show that contributing factors like implant position and design, soft tissue condition and dynamics of physiological motions have not yet been fully understood. As in vivo measurements of excessive motions are not possible due to ethical objections, a comprehensive approach is proposed which is capable of testing THR stability under dynamic, reproducible and physiological conditions. The approach is based on a hardware-in-the-loop (HiL) simulation where a robotic physical setup interacts with a computational musculoskeletal model based on inverse dynamics. A major objective of this work was the validation of the HiL test system against in vivo data derived from patients with instrumented THRs. Moreover, the impact of certain test conditions, such as joint lubrication, implant position, load level in terms of body mass and removal of muscle structures, was evaluated within several HiL simulations. The outcomes for a normal sitting down and standing up maneuver revealed good agreement in trend and magnitude compared with in vivo measured hip joint forces. For a deep maneuver with femoral adduction, lubrication was shown to cause less friction torques than under dry conditions. Similarly, it could be demonstrated that less cup anteversion and inclination lead to earlier impingement in flexion motion including pelvic tilt for selected combinations of cup and stem positions. Reducing body mass did not influence impingement-free range of motion and dislocation behavior; however, higher resisting torques were observed under higher loads. Muscle removal emulating a posterior surgical approach indicated alterations in THR loading and the instability process in contrast to a reference case with intact musculature. Based on the presented data, it can be concluded that the HiL test system is able to reproduce comparable joint dynamics as present in THR patients.

  3. A Novel Approach for Dynamic Testing of Total Hip Dislocation under Physiological Conditions.

    Directory of Open Access Journals (Sweden)

    Sven Herrmann

    Full Text Available Constant high rates of dislocation-related complications of total hip replacements (THRs show that contributing factors like implant position and design, soft tissue condition and dynamics of physiological motions have not yet been fully understood. As in vivo measurements of excessive motions are not possible due to ethical objections, a comprehensive approach is proposed which is capable of testing THR stability under dynamic, reproducible and physiological conditions. The approach is based on a hardware-in-the-loop (HiL simulation where a robotic physical setup interacts with a computational musculoskeletal model based on inverse dynamics. A major objective of this work was the validation of the HiL test system against in vivo data derived from patients with instrumented THRs. Moreover, the impact of certain test conditions, such as joint lubrication, implant position, load level in terms of body mass and removal of muscle structures, was evaluated within several HiL simulations. The outcomes for a normal sitting down and standing up maneuver revealed good agreement in trend and magnitude compared with in vivo measured hip joint forces. For a deep maneuver with femoral adduction, lubrication was shown to cause less friction torques than under dry conditions. Similarly, it could be demonstrated that less cup anteversion and inclination lead to earlier impingement in flexion motion including pelvic tilt for selected combinations of cup and stem positions. Reducing body mass did not influence impingement-free range of motion and dislocation behavior; however, higher resisting torques were observed under higher loads. Muscle removal emulating a posterior surgical approach indicated alterations in THR loading and the instability process in contrast to a reference case with intact musculature. Based on the presented data, it can be concluded that the HiL test system is able to reproduce comparable joint dynamics as present in THR patients.

  4. Test and simulation of dynamic phase compensation from Mita-Teknik A/S

    DEFF Research Database (Denmark)

    Soerensen, P.; Iov, Florin; Blaabjerg, Frede

    This report describes the test of a dynamic phase compensation unit or a wind turbine with directly connected induction generators. The compensation unit is based on thyristor switched capacitors, where conventional wind turbine compensations use mechanical contactors to switch the capacitors. Th....... The influence on power quality analysed, and influence on component lifetime is discussed. Besides, simulation models in Matlab/Simulink are presented, including a flickermeter model....

  5. Testing an Idealized Dynamic Cascade Model of the Development of Serious Violence in Adolescence

    OpenAIRE

    Dodge, Kenneth A.; Greenberg, Mark T.; Malone, Patrick S.

    2008-01-01

    A dynamic cascade model of development of serious adolescent violence was proposed and tested through prospective inquiry with 754 children (50% male; 43% African American) from 27 schools at 4 geographic sites followed annually from kindergarten through grade 11 (ages 5 through 18). Self, parent, teacher, peer, observer, and administrative reports provided data. Partial least squares (PLS) analyses revealed a cascade of prediction and mediation: An early social context of disadvantage predic...

  6. Research on Asphalt Mixture Permanent Deformation by Single Penetration Repeated Shear Test%基于单轴贯入重复剪切试验的沥青混合料永久变形

    Institute of Scientific and Technical Information of China (English)

    许严; 孙立军; 刘黎萍

    2013-01-01

    沥青路面车辙变形越发严重,降低路面使用寿命的同时大大影响行车安全.通过对比分析,提出运用单轴贯入重复剪切试验研究沥青混合料的永久变形.对高速公路沥青路面上中面层最常用的4种沥青混合料进行了不同荷载水平下的单轴贯入重复剪切试验,得到如下结论:单轴贯入重复剪切试验可以做出沥青混合料的三阶段变形;荷载越大混合料永久变形的速率越大,剪切疲劳寿命或流动数越小,当荷载大于或等于1.3 MPa时改性沥青混合料在较小的荷载次数内变形过大,发生剪切破坏,而当荷载小于或等于1.1MPa时变形增加极慢,稳定地处于变形的第二阶段而不破坏;抗剪强度较大的沥青混合料抵抗剪切变形的能力较强,改性沥青混合料抵抗剪切变形的能力远大于普通沥青混合料;荷载应力水平和作用次数具有等效性.%The pavement rutting is getting worse,which shortens the pavement service life,and the driving safety is therefore affected.A single penetration repeated shear test (SPRST) was proposed for a research on asphalt mixture permanent deformation on the basis of a comparative analysis.Many SPRST tests on different load levels were made with four kinds of the most commonly used asphalt mixtures in the upper and middle layer of asphalt pavements.Test results show that the three-stage permanent deformation behavior of asphalt mixtures on loads can be obtained by SPRST.The bigger the load is,the faster the permanent deformation of asphalt mixtures increases and the smaller the shear fatigue life or the flow number is.A larger load (≥1.3 MPa) brings about large deformation without large load cycles and the mixture breaks; but the smaller load (≤1.1MPa) gives rise to a slow increase of deformation,which is stable in the second stage.The asphalt mixtures with bigger shear strength have a greater ability to resist the shear deformation than conventional asphalt

  7. 油墨在胶版纸中的渗透深度研究%The Research on the Penetration Depth of Ink in Offset Paper

    Institute of Scientific and Technical Information of China (English)

    李鑫; 魏先福

    2014-01-01

    In order to research the relationship between penetration depth of ink and dynamic liquid absorption permeability, this paper predicts the penetration depth of ink in offset paper. The study chooses ten kinds of offset paper and tests their characters, including smoothness, roughness, glossiness, whiteness and the weight absorbed by paper surface. By using a dynamic penetration analyzer ( HVL-PDA) and water as test fluid, the dynamic absorption characteristics of the ten kinds of offset paper are measured, making a proof of offset printing patterns of these ten kinds of offset paper by using a printability tester at the same time. The depths of ink penetration in ten kinds of offset paper are measured by the three-dimensional video microscopy system, the results of the analyses show that the penetration depth of ink is closely related to paper dynamic liquid absorption.%为了研究纸张的动态吸收性与油墨的渗透深度之间的关系,预测油墨在胶版纸中的渗透性深度,选用10种胶版纸,采用 HVL-PDA 动态渗透分析仪,以水为测试液体,测量了10种胶版纸的动态吸收特性。同时,采用印刷适性仪对这10种胶版纸进行胶印打样,并用三维视频显微系统VHX-600对油墨的渗透深度进行测量,结果表明,胶版纸动态吸收特性对油墨的渗透深度有一定的影响。

  8. Dynamic parameters test of Haiyang Nuclear Power Engineering in reactor areas, China

    Science.gov (United States)

    Zhou, N.; Zhao, S.; Sun, L.

    2012-12-01

    Haiyang Nuclear Power Project is located in Haiyang city, China. It consists of 6×1000MW AP1000 Nuclear Power generator sets. The dynamic parameters of the rockmass are essential for the design of the nuclear power plant. No.1 and No.2 reactor area are taken as research target in this paper. Sonic logging, single hole and cross-hole wave velocity are carried out respectively on the site. There are four types of rock lithology within the measured depth. They are siltstone, fine sandstone, shale and allgovite. The total depth of sonic logging is 409.8m and 2049 test points. The sound wave velocity of the rocks are respectively 5521 m/s, 5576m/s, 5318 m/s and 5576 m/s. Accroding to the statistic data, among medium weathered fine sandstone, fairly broken is majority, broken and relatively integrity are second, part of integrity. Medium weathered siltstone, relatively integrity is mojority, fairly broken is second. Medium weathered shale, fairly broken is majority, broken and relatively integrity for the next and part of integrity. Slight weathered fine sandstone, siltstone, shale and allgovite, integrity is the mojority, relatively integrity for the next, part of fairly broken.The single hole wave velocity tests are set in two boreholesin No.1 reactor area and No.2 reactor area respectively. The test depths of two holes are 2-24m, and the others are 2-40m. The wave velocity data are calculated at different depth in each holes and dynamic parameters. According to the test statistic data, the wave velocity and the dynamic parameter values of rockmass are distinctly influenced by the weathering degree. The test results are list in table 1. 3 groups of cross hole wave velocity tests are set for No.1 and 2 reactor area, No.1 reactor area: B16, B16-1, B20(Direction:175°, depth: 100m); B10, B10-1, B11(269°, 40m); B21, B21-1, B17(154°, 40m); with HB16, HB10, HB21 as trigger holes; No.2 reactor area: B47, B47-1, HB51(176°, 100m); B40, B40-1, B41(272°, 40m); B42, B42-1, B

  9. Update of the 2 Kw Solar Dynamic Ground Test Demonstration Program

    Science.gov (United States)

    Shaltens, Richard K.; Boyle, Robert V.

    1994-01-01

    The Solar Dynamic (SD) Ground Test Demonstration (GTD) program demonstrates the operation of a complete 2 kW, SD system in a simulated space environment at a NASA Lewis Research Center (LeRC) thermal-vacuum facility. This paper reviews the goals and status of the SD GTD program. A brief description of the SD system identifying key design features of the system, subsystems, and components is included. An aerospace industry/government team is working together to design, fabricate, assemble, and test a complete SD system.

  10. Investigating the tension load of rubber composites by impact dynamic testing

    Indian Academy of Sciences (India)

    L AMBRIŠKO; D MARASOVÁ; M CEHLÁR

    2017-04-01

    This work deals with establishing the tension load by impact dynamic testing of rubber composite conveyor belts. The value of tension load affects the shape of the used impactor and use of a support system as well as the weight of the ram and the impact height. An increase in the allowable stress when the belt is tensioned was examined during the test, to determine the effect of impact on the tension load. The obtained values of tension load are assessed using basic mathematical and statistical methods. Using the Design of Experiments method, factors that significantly affect the value of the tension load are identified.

  11. Beam Dynamics for the Preliminary Phase of the New CLIC Test Facility (CTF3)

    CERN Document Server

    Corsini, R; Rinolfi, Louis; Risselada, Thys; Royer, P; Tecker, F A

    2001-01-01

    In the framework of the CLIC (Compact Linear Collider) RF power source studies, the scheme of electron pulse compression and bunch frequency mulitiplication, using injection by RF deflectors into an isochronous ring, will be tested, at low charge, during the preliminary phase of the new CLIC Test Facility (CTF3) at CERN. In this paper, we describe the beam dynamics studies made in order to assess the feasibility of the bunch combination experiment, as well as the related beam measurements performed on the LEP Pre-Injector complex (LPI) before its transformation into CTF3

  12. Dynamic stiffness testing-based flutter analysis of a fin with an actuator

    Institute of Scientific and Technical Information of China (English)

    Zhang Renjia; Wu Zhigang; Yang Chao

    2015-01-01

    Engineering-oriented modeling and synthesized modeling of the fin-actuator system of a missile fin are introduced, including mathematical modeling of the fin, motor and multi-stage gear reducer. The fin-actuator model is verified using dynamic stiffness testing. Good agreement is achieved between the test and theoretical results. The parameter-variable analysis indicates that the inertia of the motor rotor, reduction ratio of the reducer, connection stiffness and damping between the actuator and fin shaft have significant impacts on the dynamic stiffness characteristics. In flutter analysis, test data are directly used in the frequency domain method and indirectly used in the time domain method through the updated fin-actuator model. The two methods play different roles in engineering applications but are of equal importance. The results indicate that dynamic stiffness and constant stiffness treatments may lead to completely different flutter characteristics. Attention should be paid to the design of the fin-actuator system of a missile.

  13. Static and dynamic testing of a damaged post tensioned concrete beam

    Directory of Open Access Journals (Sweden)

    Limongelli M.P.

    2015-01-01

    Full Text Available In this paper are reported the results of an experimental campaign carried out on a post tensioned concrete beam with the aim of investigating the possibility to detect early warning signs of deterioration basing on static and/or dynamic tests. The beam was tested in several configurations aimed to reproduce several different phases of the ‘life’ of the beam: the original undamaged state, increasing loss of tension in the post tensioning cables, a strengthening intervention carried out by means of a second tension cable, formation of further cracks on the strengthened beam. Responses of the beam were measured by an extensive set of instruments consisting of accelerometers, inclinometers, displacement transducers, strain gauges and optical fibres. The paper discusses the tests program and the dynamic characterization of the beam in the different damage scenarios. The modal properties of the beam in the different phases were recovered basing on the responses recorded on the beam during sine-sweep and impact hammer tests. The variation of the first modal frequency was studied to investigate the sensitivity of this parameter to both the cracking of the concrete section and the tension in the cables and also to compare results given by different types of experimental tests.

  14. Experimental testing procedures and dynamic model validation for vanadium redox flow battery storage system

    Science.gov (United States)

    Baccino, Francesco; Marinelli, Mattia; Nørgård, Per; Silvestro, Federico

    2014-05-01

    The paper aims at characterizing the electrochemical and thermal parameters of a 15 kW/320 kWh vanadium redox flow battery (VRB) installed in the SYSLAB test facility of the DTU Risø Campus and experimentally validating the proposed dynamic model realized in Matlab-Simulink. The adopted testing procedure consists of analyzing the voltage and current values during a power reference step-response and evaluating the relevant electrochemical parameters such as the internal resistance. The results of different tests are presented and used to define the electrical characteristics and the overall efficiency of the battery system. The test procedure has general validity and could also be used for other storage technologies. The storage model proposed and described is suitable for electrical studies and can represent a general model in terms of validity. Finally, the model simulation outputs are compared with experimental measurements during a discharge-charge sequence.

  15. Physics based Prediction of Unexploded Ordnance Penetration in Granular Materials

    Science.gov (United States)

    2017-05-01

    5.3.5 Coefficient of Restitution .......................................................................... 72 XII 5.4 Simulation of Pluviation...penetrated projectile in test 1 and the formed crater: plan view (dimensions in mm...projectile in test 2 and the formed crater: plan view (dimensions in mm

  16. Hydrophobic treatment of concrete as protection against chloride penetration

    NARCIS (Netherlands)

    Vries, J. de; Polder, R.B.; Borsje, H.

    1996-01-01

    Hydrophobic treatment makes a concrete surface absorb less water and less chloride. Hydrophobic treatment was studied as a protection agninst chloride penetration from deicing salts. Test methods were designed. Nine hydrophobic products were tested, of which three complied to the requirements on fin

  17. Development of Drop/Shock Test in Microelectronics and Impact Dynamic Analysis for Uniform Board Response

    Science.gov (United States)

    Kallolimath, Sharan Chandrashekar

    For the past several years, many researchers are constantly developing and improving board level drop test procedures and specifications to quantify the solder joint reliability performance of consumer electronics products. Predictive finite element analysis (FEA) by utilizing simulation software has become widely acceptable verification method which can reduce time and cost of the real-time test process. However, due to testing and metrological limitations it is difficult not only to simulate exact drop condition and capture critical measurement data but also tedious to calibrate the system to improve test methods. Moreover, some of the important ever changing factors such as board flexural rigidity, damping, drop height, and drop orientation results in non-uniform stress/strain distribution throughout the test board. In addition, one of the most challenging tasks is to quantify uniform stress and strain distribution throughout the test board and identify critical failure factors. The major contributions of this work are in the four aspects of the drop test in electronics as following. First of all, an analytical FEA model was developed to study the board natural frequencies and responses of the system with the consideration of dynamic stiffness, damping behavior of the material and effect of impact loading condition. An approach to find the key parameters that affect stress and strain distributions under predominate mode responses was proposed and verified with theoretical solutions. Input-G method was adopted to study board response behavior and cut boundary interpolation methods was used to analyze local model solder joint stresses with the development of global/local FEA model in ANSYS software. Second, no ring phenomenon during the drop test was identified theoretically when the test board was modeled as both discrete system and continuous system. Numerical analysis was then conducted by FEA method for detailed geometry of attached chips with solder

  18. Control of penetration zone GMAW

    Directory of Open Access Journals (Sweden)

    Віталій Петрович Iванов

    2016-11-01

    Full Text Available Thermal properties of the base metal, shielding medium and the nature of the electrode metal transfer to a great extent determine the penetration area formation in gas-arc welding. It is not always possible to take into account the influence of these factors on penetration front forming within the existing models. The aim of the work was to research the penetration area forming in gas-arc welding. The research of the penetration area forming in gas-arc welding of CrNi austenitic steels was made. The parameters of the regime as well as the kind of the gaseous medium influence on the formation of the penetration zone were studied. The article shows a linear proportional relationship between the electrode feed rate and the size of the base metal plate. The penetration area formation mode for welding in argon and carbon dioxide have been worked out. Diameter, feed rate and the speed of the electrode movement have been chosen as the main input parameters. Multiple regression analysis method was used to make up the modes. The relations of the third order that make it possible to take into account the electrode metal transfer and thermal properties change of the materials to be welded were used. These relationships show quite good agreement with the experimental measurements in the calculation of the fusion zone shape with consumable electrode in argon and carbon dioxide. It was determined that the shape of the melting front curve can be shown as a generalized function in which the front motion parameters depend on feed rate and the diameter of the electrode. Penetration zone growth time is determined by the welding speed and is calculated as a discrete function of the distance from the electrode with the spacing along the movement coordinate. The influence of the mode parameters on the formation of the fusion zone has been investigated and the ways to manage and stabilize the weld pool formation have been identified. The modes can be used to develop

  19. Akon - A Penetrator for Europa

    Science.gov (United States)

    Jones, Geraint

    2016-04-01

    Jupiter's moon Europa is one of the most intriguing objects in our Solar System. This 2000km-wide body has a geologically young solid water ice crust that is believed to cover a global ocean of liquid water. The presence of this ocean, together with a source of heating through tidal forces, make Europa a conceivable location for extraterrestrial life. The science case for exploring all aspects of this icy world is compelling. NASA has selected the Europa Mission (formerly Europa Clipper) to study Europa in detail in the 2020s through multiple flybys, and ESA's JUICE mission will perform two flybys of the body in the 2030s. The US agency has extended to the European Space Agency an invitation to provide a contribution to their mission. European scientists interested in Europa science and exploration are currently organizing themselves, in the framework of a coordinated Europa M5 Inititative to study concurrently the main options for this ESA contribution, from a simple addition of individual instruments to the NASA spacecraft, to a lander to investigate Europa's surface in situ. A high speed lander - a penetrator - is by far the most promising technology to achieve this latter option within the anticipated mass constraints, and studies of such a hard lander, many funded by ESA, are now at an advanced level. An international team to formally propose an Europa penetrator to ESA in response to the anticipated ESA M5 call is growing. The working title of this proposal is Akon (Άκων), named after the highly accurate javelin gifted to Europa by Zeus in ancient Greek mythology. We present plans for the Akon penetrator, which would impact Europa's surface at several hundred metres per second, and travel up to several metres into the moon's subsurface. To achieve this, the penetrator would be delivered to the surface by a dedicated descent module, to be destroyed on impact following release of the penetrator above the surface. It is planned that the instruments to be

  20. In situ characterization of projectile penetration into sand targets

    Science.gov (United States)

    Borg, John P.; Sable, Peter; Sandusky, Harold; Felts, Joshua

    2017-01-01

    This work presents the results from dynamic penetration experiments in which long rod projectiles were launched into Ottawa sand at velocities ranging from 90 m/s to 350 m/s. A unique aspect of these experiments was that the sand targets were visually accessible, which allowed for the penetration event recorded using high-speed digital photography. The images were processed using two different correlation methods. In addition, stress measurements of the transmitted waveforms were simultaneously collected from a piezoelectric load cell that was buried in the sand at various locations relative to the shot line. The results indicate that impact results in two waves: one similar to a detached bow shock and one near the projectile that forms force chains. Grains are damaged and broken by the force chains which allows the projectile to penetrate the target.