WorldWideScience

Sample records for dye manufacturing company

  1. Biological treatment of wastewaters from a dye manufacturing company using a trickling filter

    International Nuclear Information System (INIS)

    Kornaros, M.; Lyberatos, G.

    2006-01-01

    The aim of this work was to assess the effectiveness of a biological trickling filter for the treatment of wastewaters produced by a company manufacturing organic dyes and varnishes. The combined wastewater effluent was fed to a pilot-scale trickling filter in two feeding modes, continuously and as a sequencing batch reactor (SBR). The biodegradability of the diluted wastewaters that were subjected to physicochemical treatment, using Ca(OH) 2 and FeSO 4 , was initially studied using a continuously operated trickling filter. The system efficiency ranged up to 60-70% for a hydraulic loading of 1.1 m 3 /m 2 day and up to 80-85% for a hydraulic loading 0.6 m 3 /m 2 day. A stable chemical oxygen demand (COD) removal efficiency of 60-70% was achieved even in the case of undiluted wastewater at a hydraulic loading of 1.1 m 3 /m 2 day. The effectiveness of biological treatment of a mixture of the company's main wastewater streams was also examined. The microorganisms developed in the trickling filter were able to efficiently remove COD levels up to 36,000 mg/L, under aerobic conditions at pH values between 5.5 and 8.0. Depending on the operating conditions of the system, about 30-60% of the total COD removal was attributed to air stripping caused by the air supply at the bottom of the filter, whereas the rest of the COD was clearly removed through biological action. The proposed biological treatment process based on a trickling filter, which was operated either continuously or even better in an SBR mode, appears as a promising pretreatment step for coping with dye manufacturing wastewaters in terms of removing a significant portion of the organic content

  2. Safety in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Kopczewski Marian

    2017-02-01

    Full Text Available The safety systems include the functioning of the institutions of a state, central, and local government, businesses, and social organizations. Research in this discipline should contribute to the development of the theoretical foundations and systems of national and international security and operating systems in the area of technical safety. Technical safety engineering should deal with a design, build, operation, and decommissioning of technical measures in order to minimize the opportunities and the size of their negative impact on the environment, people, and the good of civilization. With this in mind, the main purpose of the research was to evaluate the safety of technical manufacturing company that uses a wide machine park. A plant manufacturing parts and components for automobiles was the audited company.

  3. Cloud Manufacturing Service Paradigm for Group Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Jingtao Zhou

    2014-07-01

    Full Text Available The continuous refinement of specialization requires that the group manufacturing company must be constantly focused on how to concentrate its core resources in special sphere to form its core competitive advantage. However, the resources in enterprise group are usually distributed in different subsidiary companies, which means they cannot be fully used, constraining the competition and development of the enterprise. Conducted as a response to a need for cloud manufacturing studies, systematic and detailed studies on cloud manufacturing schema for group companies are carried out in this paper. A new hybrid private clouds paradigm is proposed to meet the requirements of aggregation and centralized use of heterogeneous resources and business units distributed in different subsidiary companies. After the introduction of the cloud manufacturing paradigm for enterprise group and its architecture, this paper presents a derivation from the abstraction of paradigm and framework to the application of a practical evaluative working mechanism. In short, the paradigm establishes an effective working mechanism to translate collaborative business process composed by the activities into cloud manufacturing process composed by services so as to create a foundation resulting in mature traditional project monitoring and scheduling technologies being able to be used in cloud manufacturing project management.

  4. Industrial conflict and its management in selected Nigerian manufacturing companies

    OpenAIRE

    Solaja Oludele Mayowa

    2015-01-01

    This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies und...

  5. A Strategic Analysis of a Valve Manufacturing Company

    OpenAIRE

    Schlesinger, Victor

    2012-01-01

    This paper describes the industry environment encountered by an Automatic Control Valve manufacturing company with a virtually global distribution network. Traditionally a differentiations strategy business, the company intends to penetrate the commodity sector of its market. The scope of the paper covers the industry and company overview, provides an external analysis to determine the competitive environment of the industry, and analyses the internal capabilities of the company. The paper ev...

  6. Industrial conflict and its management in selected Nigerian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Solaja Oludele Mayowa

    2015-12-01

    Full Text Available This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies under the study. The data collected were analyzed using descriptive statistic including tables, frequency counts, and percentages as well as mean scores. The findings revealed that the causes of conflict in manufacturing companies in Lagos State, Nigeria include poor means of communicating grievances to top managers, unfavorable economic and industrial policies, poor employee compensation and welfare among others. Therefore, this study concluded that managers should combine strategies such as bargaining, collaboration and avoidance when dealing with industrial conflict to maintain cordial and productive labour-management relationship.

  7. Case study of lean manufacturing application in a die casting manufacturing company

    Science.gov (United States)

    Ching, Ng Tan; Hoe, Clarence Chan Kok; Hong, Tang Sai; Ghobakhloo, Morteza; Pin, Chen Kah

    2015-05-01

    The case study of lean manufacturing aims to study the application of lean manufacturing in a die casting manufacturing company located in Pulau Penang, Malaysia. This case study describes mainly about the important concepts and applications of lean manufacturing which could gradually help the company in increasing the profit by studying and analyzing their current manufacturing process and company culture. Many approaches of lean manufacturing are studied in this project which includes: 5S housekeeping, Kaizen, and Takt Time. Besides, the lean tools mentioned, quality tool such as the House of Quality is being used as an analysis tool to continuously improve the product quality. In short, the existing lean culture in the company is studied and analyzed, with recommendations written at the end of this paper.

  8. STOCK MANAGEMENT IN A MANUFACTURING AND TRADING COMPANY

    OpenAIRE

    Ewa Kempa

    2009-01-01

    The article shows stock management in the logistic context on the example of a manufacturing and trading company. Stock is one of the most important, and, at the same time, the most difficult issues related to company management as it requires efficient handling of transport and inventory. Also, the amount of stock should possibly be optimal so it does not account for too high operating costs of a company.

  9. Corporate Social Responsibility in Food Manufacturing Companies – Environmental Dimensions

    Directory of Open Access Journals (Sweden)

    Ľudmila Nagyová

    2016-01-01

    Full Text Available The degree of a company’s acceptance and integration of the CSR concept is directly reflected in the fundamental principles of the company. Through the environmental sustainability, a company can make a positive contribution to the society and the natural environment. Competitive and cost pressures are the key drivers of sustainable development in the industry. Today, many international food and drink companies are delivering excellent achievements. The present paper tries to highlight how much are food manufacturing companies committed to caring for the environment as a main component of their CSR strategy. In order to fulfil the defined objectives of the paper, the primary and secondary sources of information were collected and used, as well as there was used the method of interview, using a questionnaire (total number of respondents was 100 food manufacturing companies. In our research the highest percentage of large, SMC and micro companies indicated the reduction of negative operational impacts as the most important commitment of companies in relation to environment. Most large companies invest to installing pollution reducing technology to improve environmental quality (67% and utilizing more environmentally friendly raw materials (51%. These areas indicated the highest percentage as well as for SMC. In the case of large companies there are more visible movements in environmental practices than in micro and small-medium companies.

  10. A Business Plan for PK Handbags Manufacturing Company

    OpenAIRE

    Somchatvong, Laddaporn

    2009-01-01

    PK Co. Limited is a small family-business-owned company located in Thailand. Since established in 1998, the company’s business is manufacturing women’s fashion handbags for wholesale apparel trading company in Thailand. The company also produces and merchandises premium gifts for Kasikorn Bank, one of the largest banks in Thailand. Over the past ten years, the company has generated more than 200 million Baht in revenue or £ 3.6 million . The founders, Likit and Duangporn Somchatvong, have ...

  11. Lean Production Applications in a Manufacturing Company

    OpenAIRE

    Ali Görener; Humeyra Baser; Ali Turkyilmaz

    2013-01-01

    Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cyc...

  12. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT...... research. A case study is used to emphasize how a process perspective enriches the traditional structural perspective. Finally, through first attempts at theory building, a set of propositions is suggested in order to overcome long-standing problems found in AMT research....

  13. AN EXPLORATORY STUDY OF MANUFACTURING STRATEGY OF PACKAGING PRODUCT-MANUFACTURING COMPANIES IN INDIA

    Directory of Open Access Journals (Sweden)

    Pradip P. Patil

    2012-09-01

    Full Text Available This paper presents finding of a survey on manufacturing strategy implementation (MSI adopted by the Indian packaging product manufacturing companies (IPPMC. Though the companies differ in terms of prod uct types (shape, method, content and material of packaging, conversion system, sales volume and sophistication of machinery used, they share common purpose that are used for packaging the product s . With growth in demand for consumer products, packaging f orms basis of differentiating products from competitors. The survey shows emphasis on implementation of manufacturing strategy, key decision areas, identifies competitive priorities, order winners. To get insight, three companies are selected for detailed case studies.

  14. Lean Production Applications in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Ali Görener

    2016-01-01

    Full Text Available Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cycle times were determined, and Kaizen improvement methods and line balancing methods were applied according to the results. And the last section of study showed conclusion of lean implementation.

  15. Backshoring of Danish manufacturing companies: A learning process perspective

    DEFF Research Database (Denmark)

    Gustafson, Lasse; Pesoutova, Katerina; Turcan, Romeo V.

    2017-01-01

    The article summarizes a Master Thesis undertook in 2017 by Lasse Gustafson and Katerina Pesoutova, MSc students at International Business Centre at Aalborg University, supervised by Romeo V. Turcan. Rethinking previous Offshoring strategies and bringing production back home is a trend that more...... with the focus on Danish manufacturing companies in Northern Jutland. The findings are based on interviews conducted with companies in the region....

  16. LEAN MANUFACTURING IN TWO SERBIAN FOOD COMPANIES - CASE STUDIES

    Directory of Open Access Journals (Sweden)

    Ilija Đekić

    2012-06-01

    Full Text Available This paper gives an overview of a 9 month experience in implementing lean manufacturing tools in two Serbian food companies. Both companies have certified quality and food safety management systems and are food exporters. One of them is a big producer with more than 1000 employees with a three shift serial production while the other is a small producer with one shift and batch oriented production. Results showed that six tools were chosen by both companies - Total productive maintenance, Poka yoke, batch reduction, layout improvement, standardization of work and visual management. The big company implemented also cellular and flow, Jidoka, quick changeovers and 5S. None of the companies expressed interest at implementing Just-In-Time, Kanban, Self-inspection and Value stream mapping at this stage of the project.

  17. An Assessment of RFID Applications in Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Gładysz Bartłomiej

    2015-12-01

    Full Text Available The meaning of Cyber Physical Systems and an Internet of Things with indication of RFID position in those concepts was outlined. Research program related to assessment of RFID technology was presented. Author deducted on problems related to RFID implementations and RFID essentially for logistics of manufacturing companies. Research goals and problems were formulated. Tools, techniques, models and methods that could be utilized were proposed and discussed. Research was focused on design of a new method to support early decision making phases for RFID application in logistics of manufacturing companies. Author stated that literature and practice lacks of complex method to answer if RFID is strategically important for the company, which processes should be RFID-supported, how RFID-supported processes should be designed and if RFID-support is rational. Framework for assessment of RFID technology with illustrative example was discussed.

  18. IDENTIFICATION OF FACTORS AFFECTING LEAN MANUFACTURING IMPLEMENTATION IN PUMP MANUFACTURING COMPANIES IN INDIA - A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Pratik Badgujar

    2016-09-01

    Full Text Available Lean Manufacturing has now become a common word in the industrial corridors. It has now been applied to the industries of several domains. No wonder that the Pump manufacturing has also witnessed profound influence of Lean philosophy. Pump manufacturing in India has a history as old as 80 years with more than 500 pump manufacturing units presently working. The present research is an explorative study and was undertaken to identify various factors affecting lean manufacturing implementation in pump manufacturing industry. Analysis of results revealed that the companies registered increase in productivity and reduction in costs and wastes. Lack of understanding, Supply chain and Company culture are found to be the strongest barriers of lean manufacturing implementation. The multiple regression model revealed that Lack of workers support can be fairly reduced by educating them about Lean Manufacturing and establishing a healthy communication with workers. An analysis across different management levels revealed disparity in perceptions and views of personnel. There is a need for top management to align organization toward common goals so as to achieve better success in implementing lean manufacturing.

  19. Evaluation of safety management in an Appliances manufacturing company

    Directory of Open Access Journals (Sweden)

    F. Golbabaei

    2015-01-01

    Full Text Available Introduction: Prevention of accidents and work related diseases, are not allowed regardless of the safety of employees, customers, contractors and other persons. Assessment of individual safety management activities could reduce many losses. Present study aimed to evaluate the safety management of a household appliance manufacturing company.  .Material and Method: This study has done in a household appliance manufacturing company in Damavand city. Two questionnaires were firstly designed based on the weighted scores. The questionnaire 1 consisted of 4 indicators: Safety of machinery, Electrical safety, Risk assessment and Fire safety. Questionnaire 2 consisted of 11 sub indicators. Both questionnaires were completed by 30 HSE experts and supervisors. Reliability of questionnaires was based on cronbachs alpha coefficient. the safety status of each unit was determined and scored using information acquired by the questionnaires. Lastly, the safety of the entire company was determined.  .Result: Results showed that in safety management: the pressing and store house were in a good range of 66.66 and 60.12 points. Powder painting, enameling, laboratory were in a average range of 56.25, 55.92 and 54.15 points. Assembling and door storage were in a week range of 46.06 points.  .Conclusion: The findings showed that the safety status in the studied appliances company is in average range with 55.45 points. Therefore, it is recommended that the safety indicators should be improved for the betterment of the safety management in the company.

  20. Identification of complexity cost factors in manufacturing companies

    DEFF Research Database (Denmark)

    Myrodia, Anna; Hvam, Lars

    2015-01-01

    Complexity tends to be arguably the biggest challenge of manufacturing companies. As the demand from the customers increases in volume and diversity, the number of finished products and components increases as well. This increasing product complexity has a direct effect on the production processes....... This research focuses on the relation between product and process complexity. Complexity cost factors are identified and categorized under the industrial standard APQC for process classification. Then, this categorization is used as a tool for identification of complexity cost factors in seven companies...

  1. OUTBOUND LOGISTICS MANAGEMENT IN MANUFACTURING COMPANIES IN GHANA

    OpenAIRE

    Kwame Owusu Kwateng; John Frimpong Manso; Richard Osei-Mensah

    2014-01-01

    The optimization of outbound logistics operations through consolidation and collaboration using a third party logistics provider has potential to contribute to the profitability of an organization by lowering the cost of warehousing and transportation. The purpose of this paper is to assess outbound logistics of a manufacturing company (Guinness Ghana Breweries Limited) using the services of a third party logistics provider (DHL). Empirical research was employed to explore outbound logistics ...

  2. Recruitment and selection of employees for a manufacturing company

    OpenAIRE

    Pátková, Markéta

    2017-01-01

    The target of this dissertation work is the process of analysis of recruitment and selection of employees for a manufacturing company. The strength and weakness of this process depends on acquired information and knowledge. The contribution of this work consists of specific improvements and recommendations in this domain which can help increase the effectiveness in recruitment and selection of employees. The basis for the empirical part of this work consists of consultations with employees of...

  3. Transaction Costs in Global Supply Chains of Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Philipp Bremen

    2010-02-01

    Full Text Available Outsourcing has advanced to an important measure that is applied broadly in operations management. Nowadays, suppliers of manufacturing companies do not only provide direct material like raw material and operational supplements but offer components and advanced modules incurring many value-adding stages. Whereas in the past companies built up local supplier networks, they recently tend to search for global sources. However, not all companies reach their expectations towards the success of global sourcing projects. Important reasons for relocating manufacturing capacities back to local suppliers or in- house manufacturing are costs for unexpected coordination activities, limited flexibility and declined or fluctuating quality. The theory of Transaction Cost Economics postulates that transaction costs of the types information, communication and coordination determine the governance structure of a supply chain, i.e. market, hybrid or firm. The objective of this paper is to analyze the cause-and-effect chain of inter-firm transaction costs concerning global sourcing. The resulting qualitative model is based on explorative multiple-case study.

  4. Six sigma and lean production adoption in a manufacturing company

    Directory of Open Access Journals (Sweden)

    Alisson Christian Scheller

    2014-11-01

    Full Text Available The connection among Lean Production with Six Sigma originated the Lean Six Sigma methodology, focused on processes variation and waste reduction. This methodology was developed on different ways in the companies and there is no consensus over its structure and its implementation. In this context, this paper aims to identify and analyze the main characteristics on the adoption and integration of Lean Six Sigma methodology through a case study conducted in a manufacturing company that adopts lean production and six sigma. The results show two important aspects of the Lean Six Sigma methodology. One of them is the adoption of the value stream mapping as a central tool on Lean Six Sigma. The other is the use of DMAIC for improvements actions. The study indicates that despite the difficulties on Lean Six Sigma implementation, the methodology offers benefits to the company that adopts it in the suitable way.

  5. Interrelation of Lean and Green Management in Croatian Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Miro Hegedić

    2018-03-01

    Full Text Available The goal of this article is to explore the link between lean and green management, reasons for their implementation, their effect throughout the whole life cycle, as well as the current state of use of lean tools, economic and environmental indicators in the context of Croatian manufacturing companies. A semi-structured interview was used in this research. As a result, the frequency of economic and environmental performance indicators and lean tools in Croatian companies has been defined, as well as the reasons for the implementation of lean management. Additionally, the understanding of the use of Life Cycle Assessment methods, environmental standards has been obtained and the integration of lean and green management in Croatian companies has been explored. Further on, results were compared to the similar study done in the UK. Finally, it can be concluded that the integration of lean and green management is not yet sufficiently present in manufacturing companies, although there are cases in which these two approaches are integrated, primarily in the process and food industry. It is for these reasons that in the integration of these two approaches lies great potential.

  6. Cost and Management Accounting Practices: A Survey of Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Ali UYAR

    2010-11-01

    Full Text Available The purpose of this study is to explore cost and management accounting practices utilized by manufacturing companies operating in Istanbul, Turkey. The sample of the study consists of 61 companies, containing both small and medium-sized enterprises, and large companies. The data collection methodology of the study is questionnaire survey. The content of the questionnaire survey is based on several previous studies. The major findings of the study are as follows: the most widely used product costing method is job costing; the complexity in production poses as the highest ranking difficulty in product costing; the most widely used three overhead allocation bases are prime costs, units produced, and direct labor cost; pricing decisions is the most important area where costing information is used; overall mean of the ratio of overhead to total cost is 34.48 percent for all industries; and the most important three management accounting practices are budgeting, planning and control, and cost-volume-profit analysis. Furthermore, decreasing profitability, increasing costs and competition, and economic crises are the factors, which increase the perceived importance of cost accounting. The findings indicate that companies perceive traditional management accounting tools still important. However, new management accounting practices such as strategic planning, and transfer pricing are perceived less important than traditional ones. Therefore, companies need to improve themselves in this aspect.

  7. Analysis Of Lean Accounting JIT And Balance Scorecard In The Companys Lean Manufacturing

    OpenAIRE

    Irwan Sutirman Wahdiat

    2015-01-01

    This research purpose to analyze the concept of Lean Manufacturing which is influenced by the role of JIT. This research uses a theoretical approach. This study portrait thinking companies that have yet to implement lean manufacturing and after doing the concept of lean manufacturing. This study shows that the concept of lean manufacturing can make the company more efficient and effective. This paper shows some lean manufacturing dimensions of the researchers previous researchers. This study ...

  8. SUPPLY CHAIN MANAGEMENT: SOME INSIGHTS FROM INDIAN MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    Sanjay Jharkharia

    2004-01-01

    Full Text Available Some issues such as inventory management, IT-enablement of supply chains, and buyer-supplier relationships are at the core of supply chain research. Some other issues such as postponement, top management commitment, and disparities in trading partners' capability influence these core issues. Some hypotheses have been proposed to assess such influences. Through a questionnaire-based survey for Indian manufacturing companies, these hypotheses have been tested. It is observed from this research that information sharing and top management commitment have important roles towards the effectiveness of a supply chain. The findings also establish relationships among many important issues of supply chain management. The paper ends with the discussion and implications of this research.

  9. Evaluation of Musculoskeletal Disorders in Household Appliances Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Aioob Ghanbary

    2015-12-01

    Full Text Available Work-related musculoskeletal disorders are the most prevalent work-related disorders and injuries and being the main cause of disability. This study was conducted to assessment of the prevalence of musculoskeletal disorders in worker company household appliances production. Posture analysis was evaluated by OWAS method and prevalence of musculoskeletal disorders by Nordic questionnaire. With evaluating musculoskeletal disorders among company household appliances production can intervention action to reduce musculoskeletal disorders was carried out. This cross-sectional study was performed on 100 workers of the appliance manufacturing industry. These Individuals were included 15 persons from foam injection workshop, 17 persons from molding workshop, 17 operators of presses, 17 persons from packaging, 17 person from cutting unit and 17 operators of rivet. The Nordic questionnaire was completed by Individuals for the organs of arm, back, leg and wrist and Posture analysis was performed by OWAS method. The data were analyzed using Spss software version 18 and descriptive statistics and Anova test. Nordic questionnaire results revealed that highest disorders were observed in the arm (25%, back (22% and leg (21%. Also Anova test showed that was observed a significant correlation respectively between age and work experience with the prevalence of musculoskeletal disorders (p<0.02 (p<0.01. The results showed based on the level of risk OWAS for each job respectively, the highest level of risk associated with foam injection unit, packaging and cutting unit (risk level 4 and the lowest level of risk associated with molding workshop unit (risk level 2.The results of this study showed that household appliances Manufacturing workers due to the nature of their jobs are at risk of musculoskeletal disorders and Ergonomic interventions to do such as workstation redesign, reduced working hours, cycle of rest-work development.

  10. Standardization in biological staining. The influence of dye manufacturing

    DEFF Research Database (Denmark)

    Lyon, H

    2000-01-01

    not have been subjected to quality assessment either internally by the producer or vendor or externally by independent investigators or organizations such as the Biological Stain Commission. Concerted attempts at standardization in Europe are discussed. The latest results of this work, the European...... standard EN 12376, is presented. This standard is concerned with information supplied by the manufacturer with in vitro diagnostic reagents for biological staining. The standard has been prepared by a Working Group on Staining in Biology under Technical Committee 140, In Vitro Medical Devices...

  11. Organizational Culture and Safety Performance in the Manufacturing Companies in Malaysia: A Conceptual Analysis

    OpenAIRE

    Ong Choon Hee; Lim Lee Ping

    2014-01-01

    The purpose of this paper is to provide a conceptual analysis of organizational culture and safety performance in the manufacturing companies in Malaysia. Our conceptual analysis suggests that manufacturing companies that adopt group culture or hierarchical culture are more likely to demonstrate safety compliance and safety participation. Manufacturing companies that adopt rational culture or developmental culture are less likely to demonstrate safety compliance and safety participation. Give...

  12. Performance concept through a Service-Dominant Logic in Tunisian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Nejla Kerfai

    2016-06-01

    Full Text Available The purpose of this research is to discuss the meaning and the aims of transitions to Service-Dominant Logic (SDL concept especially in Tunisian manufacturing companies. It also aims to observe the performance perception, measurement and practices by these manufacturing companies. A literature review revealed that SDL share some ideas with other concepts such as corporate social responsibility, resource based view and product service system. Therefore a conceptual model of the transition to SDL in manufacturing companies was proposed. Then an interview-based study was employed to explore the extent of the SDL as well as the performance perception measurement and practices in the Tunisian manufacturing companies. An interview guideline was developed and used in the interviews across some of Tunisian companies. A qualitative data analysis revealed that the studied Tunisian manufacturing companies consider the performance as the combination of Quality-Cost-Time, they uses mostly technical and quality indicators and give importance to practices concerning quality management. The presented results are limited by the low response rate and the small sample size. Since the respondents belong to manufacturing companies, the research results could be only indicative of this type of companies. This research is an attempt to explore the service transitions that many manufacturing companies seek to undertake in order to contribute in the development of manufacturing companies’ networks to provide grounds to be more competitive and preferment.

  13. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2012-04-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decisionmaking, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that canlead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issuesassociated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes animproved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  14. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2011-10-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decision making, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that can lead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issues associated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes an improved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  15. 77 FR 47115 - Manufacturer of Controlled Substances; Notice of Application; Cayman Chemical Company

    Science.gov (United States)

    2012-08-07

    ...)-propylthiophenethylamine I (7348). Marihuana (7360) I Tetrahydrocannabinols (7370) I Mescaline (7381) I 3,4,5... (1205) II The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol. In...

  16. 76 FR 12726 - Tropicana Manufacturing Company, Inc.; Supplemental Notice That Initial Market-Based Rate Filing...

    Science.gov (United States)

    2011-03-08

    ... . To facilitate electronic service, persons with Internet access who will eFile a document and/or be... Manufacturing Company, Inc.; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... Tropicana Manufacturing Company, Inc.'s application for market-based rate authority, with an accompanying...

  17. The improvement of the manufacturing process of a company by the Sigma level: the case of the company BAG (Batna

    Directory of Open Access Journals (Sweden)

    Athmane MECHENENE

    2014-06-01

    Full Text Available This modest work aims to evaluate the performance of the manufacturing process of the company by a new measurement tool, namely the sigma level whose purpose is to quantify the costs inherent in each production process, measure the levels of six Sigma in adjacent processes, to achieve weight calculate DPMO (Defects Per Million Opportunity and thus assess the overall competitiveness of the company. This new tool for measuring the performance of the manufacturing process (sigma level is applied to manufacturing gas cylinders (BAG - Batna.

  18. Measuring the Leanness of Manufacturing system Using Fuzzy TOPSIS : A Case Study of Parizan Sanat Company

    Directory of Open Access Journals (Sweden)

    Akram, Rasoul

    2013-11-01

    Full Text Available The implementation of lean manufacturing concepts has had a significant impact on various industries. Many companies around the world have attempted to implement lean manufacturing, but the lack of an obvious understanding of lean measurement and its performance has caused its implementation to fail. This paper presents an innovative approach by using fuzzy TOPSIS to measure the production leanness of manufacturing systems, as a paradigm. This approach is applied to the Parizan Sanat company.

  19. Proposal of a Modelling of the Innovation Process in an International Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Pauline Lacom

    2017-07-01

    Full Text Available Nowadays, to cope with the competition, and to ensure the durability of their activities, companies have to be able to innovate. Manufacturing companies operating in a B2B market often perceive innovation as a technological result. However, innovation is often more characterized as a process. The needs of the users, and not only the technology, can achieve innovation. In this context, our paper intends to determine how to involve better the users in the innovation process of an international manufacturing company, which is, according to us, representative of the current manufacturing companies. The aim of our research paper is to help manufacturing companies to manage innovation led by users, and to implement their innovation process so that they will be able to set up specific tools for each action of the process. The study proposes a diagram-based language Structured Analysis and Design Technique (SADT that is based on the normative guide FD X50-271 of the French national organization for standardization (AFNOR. The SADT model we propose usefully complements this guide, to make the innovation process more understandable, practical and operational, for manufacturing companies, which are often helpless when faced with the subject. A critical analysis of the model we propose completed in a manufacturing company through semi-structured interviews of the innovation team and questionnaire for all the employees shows the application of the model in the company.

  20. Corporate Social Responsibility in Food Manufacturing Companies – Environmental Dimensions

    OpenAIRE

    Ľudmila Nagyová; Mária Holienčinová; Ingrida Košičiarová; Tomáš Holota

    2016-01-01

    The degree of a company’s acceptance and integration of the CSR concept is directly reflected in the fundamental principles of the company. Through the environmental sustainability, a company can make a positive contribution to the society and the natural environment. Competitive and cost pressures are the key drivers of sustainable development in the industry. Today, many international food and drink companies are delivering excellent achievements. The present paper tries to highlight how mu...

  1. Impact of Company Size on Manufacturing Improvement Practices: An empirical study

    International Nuclear Information System (INIS)

    Syan, C S; Ramoutar, K

    2014-01-01

    There is a constant search for ways to achieve a competitive advantage through new manufacturing techniques. Best performing manufacturing companies tend to use world-class manufacturing (WCM) practices. Although the last few years have witnessed phenomenal growth in the use of WCM techniques, their effectiveness is not well understood specifically in the context of less developed countries. This paper presents an empirical study to investigate the impact of company size on improving manufacturing performance in manufacturing organizations based in Trinidad and Tobago (T and T). Empirical data were collected via a questionnaire survey which was send to 218 manufacturing firms in T and T. Five different company sizes and seven different industry sectors were studied. The analysis of survey data was performed with the aid of Statistical Package for Social Sciences (SPSS) software. The study signified facilitating and impeding factors towards improving manufacturing performance. Their relative impact/importance is dependent on varying company size and industry sectors. Findings indicate that T and T manufacturers are still practicing traditional approaches, when compared with world class manufacturers. In the majority of organizations, these practices were not 100% implemented even though they started the implementation process more than 5 years ago. The findings provided some insights in formulating more optimal operational strategies, and later develop action plans towards more effective implementation of WCM in T and T manufacturers

  2. Impact of Company Size on Manufacturing Improvement Practices: An empirical study

    Science.gov (United States)

    Syan, C. S.; Ramoutar, K.

    2014-07-01

    There is a constant search for ways to achieve a competitive advantage through new manufacturing techniques. Best performing manufacturing companies tend to use world-class manufacturing (WCM) practices. Although the last few years have witnessed phenomenal growth in the use of WCM techniques, their effectiveness is not well understood specifically in the context of less developed countries. This paper presents an empirical study to investigate the impact of company size on improving manufacturing performance in manufacturing organizations based in Trinidad and Tobago (T&T). Empirical data were collected via a questionnaire survey which was send to 218 manufacturing firms in T&T. Five different company sizes and seven different industry sectors were studied. The analysis of survey data was performed with the aid of Statistical Package for Social Sciences (SPSS) software. The study signified facilitating and impeding factors towards improving manufacturing performance. Their relative impact/importance is dependent on varying company size and industry sectors. Findings indicate that T&T manufacturers are still practicing traditional approaches, when compared with world class manufacturers. In the majority of organizations, these practices were not 100% implemented even though they started the implementation process more than 5 years ago. The findings provided some insights in formulating more optimal operational strategies, and later develop action plans towards more effective implementation of WCM in T&T manufacturers.

  3. The Effects of Firm Strategic Factors on Manufacturing Companies ...

    African Journals Online (AJOL)

    The effects of firms' strategic factors on strategic choices and performance differentials in Nigerian manufacturing sectors have not been systematically investigated. Against the backdrop of declining manufacturing performance in Nigeria, this paper examined the effects of selected firm strategic factors on the returns on ...

  4. The role of management participation in manufacturing companies ...

    African Journals Online (AJOL)

    ... is a fundamental barrier to the development of big organizations and companies. ... It is also a field study in terms of data collection, the statistical population of this ... except the effect of management participation on marketing innovation and ...

  5. Supply chain management as the company engine in automotive manufacturing

    OpenAIRE

    Ferriols Martínez, Francisco José; Mula, Josefa; Díaz-Madroñero Boluda, Francisco Manuel

    2013-01-01

    ©2013 International Federation of Automatic Control (IFAC). Originally published in IFAC-PapersOnLine (www.ifac-papersonline.net) The objective of this paper is to define how to create a supply chain management (SCM) organizational structure with roles and responsibilities in a multinational company with a big part of the supply chain inside of the company. SCM means having under control the complete supply chain to decide the global optimal instead of summing up the optimal of each node i...

  6. The impact of total quality management on competitive advantage of pharmaceutical manufacturing companies in Jordan

    OpenAIRE

    Kamal A. M. Al-Qudah

    2012-01-01

    TQM is a general philosophy of management that attempts to enhance competitive advantage of organizations, This paper aims to investigate the impact of total quality management on competitive advantage of Pharmaceutical manufacturing companies in Jordan. The data are collected from mid- to senior-level managerial employees of Pharmaceutical manufacturing companies in Jordan. The data were analyzed using correlation and multiple regression analyses. The results indicate that, there is effec...

  7. IMPLEMENTATION OF LEAN MANUFACTURING IN FISH CANNING COMPANY: A CASE STUDY OF A CANNED SARDINES PRODUCTION COMPANY IN MOROCCO

    Directory of Open Access Journals (Sweden)

    I. Idrıssi

    2015-12-01

    Full Text Available Lean is a powerful tool, which can bring significant benefit to manufacturing industries by creating value through reduction of waste. Although the lean concept has become very popular in mass production industries such as the automotive industry, more recently the concept has been adopted in different batch processing industries and service sectors. The application of lean tools into the food processing industry has not received the same level of attention compared to the traditional manufacturing industries. The paper discusses how the lean concept could be applied to a fish manufacturing company. The paper first presents the lean concept tools. The empirical section discusses how a case company, operating as a contract manufacturer in the food industry, has applied the lean production concept and tools. In the case study, three analysis tools are examined and the structures of demand chains of different customers are presented. The delivery times will decrease and more flexibility will be needed from the contract manufacturer. The case study shows that much movement is possible toward the lean supply chain and partnership-based cooperation. By implementing the lean concept, food companies can increase customer value through cost reduction or through provision of additional value-enhanced services.

  8. Ecodesign maturity model: a management framework to support ecodesign implementation into manufacturing companies

    DEFF Research Database (Denmark)

    Pigosso, Daniela Cristina Antelmi; Rozenfeld, Henrique; McAloone, Tim C.

    2013-01-01

    and the results of its application into a large manufacturing company. In addition to the academic benefits related to the systematization of the ecodesign knowledge, the application of the model is shown to provide companies with: a benchmarking of ecodesign practices; an assessment of strengths and weaknesses...

  9. IT on the Shop Floor - Challenges of the Digitalization of manufacturing companies

    DEFF Research Database (Denmark)

    Richter, Alexander; Vodanovich, Shahper; Steinhüser, Melanie

    2017-01-01

    A new generation of information technology (IT), promises significant benefits for manufacturing companies in their daily work. However, the companies are rather slow in taking advantage of the opportunities offered by the current wave of digitalization. This paper starts with an overview...

  10. 77 FR 70189 - Manufacturer of Controlled Substances; Notice of Registration; Cayman Chemical Company

    Science.gov (United States)

    2012-11-23

    ... propylthiophenethylamine (7348). Marihuana (7360) I Tetrahydrocannabinols (7370) I Mescaline (7381) I 3,4,5... manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol. In reference to drug code 7370...

  11. Shop Floor-Level Control of Manufacturing Companies: An Interview Study in Finland

    Directory of Open Access Journals (Sweden)

    Tokola Henri

    2015-02-01

    Full Text Available This paper publishes the results of interviews regarding shop-floor-level control of 18 Finnish manufacturing companies. The interviews had 17 open questions relating to demand characteristics, shop floor-level control issues, production flexibility, inventory control, and potential development areas. In order to get insights from the interviews, this paper analyses the answers from the interviews and categorises them into typical answers. The companies that were interviewed are also categorised as small companies with their own end products, subcontractors, or large companies with their own end products, and the emphasis of the analysis is on how companies differ in their shop floor-level control. The results show that different types of companies have different characteristics. Small companies are characterised by constant workflow, seasonal trends in demand, and the use of forecasts. Subcontractors have great daily variation in their demand and processing times. Large companies tend to focus on inventory issues.

  12. The Evolution of Inventory Management in Manufacturing and Services Companies

    Directory of Open Access Journals (Sweden)

    Gerardo Molinary Fernández

    2000-08-01

    Full Text Available Although inventory management has significantly developed in the past years as a management discipline, its application is still minimal in the service industry and government. In contrast, it is an important tool for any company that is running a competitive business. The management of some companies considers inventory as an asset, not a liability. In addition, in companies in which the use and application of inventory models are common, they can still experience inventory problems. This paper analyzes the weakness of the traditional and most popular inventory model: The Economic Order Quantity model (EOQ. Many of the inventory models available are difficult to understand because they are based on complicate mathematical and statistical formulas. The benefits that computer software have simplifying the use of mathematical formulas are diminished because some of them do not include special applications or solutions when a variation in the assumption of the models is present. When a company implements The Just in Time philosophy (JIT, the management of inventory does not rest in complex formulas. Inventory experts need to emphasize the application of the models instead of the statistical derivation. They also need to be more aggressive in making managers, students and government authorities more aware of managing the inventory levels effectively. The responsibility of good inventory levels is not the sole task of the Operations Department, but the obligation of all the people in a company. Good inventory levels are now a measure of business competitiveness. The goal must be to increase the service level and at the same time reduce the inventory investment.

  13. Drivers and barriers for implementation of environmental strategies in manufacturing companies

    DEFF Research Database (Denmark)

    Bey, Niki; Hauschild, Michael Zwicky; McAloone, Tim C.

    2013-01-01

    In order for environmental strategies to come into effect in industry practice, they need to be implemented and applied in daily business routines. Based on a dedicated comprehensive international survey in product developing and manufacturing companies, this paper identifies major current drivers...... for implementing product life cycle oriented environmental strategies but also barriers and obstacles that need to be addressed. On this basis it provides a number of recommendations for manufacturing companies as well as policy makers to consider for a successful implementation of strategic environmental goals...... in manufacturing industry....

  14. The deployment of manufacturing flexibility as a function of company strategy

    Directory of Open Access Journals (Sweden)

    Carla Estorilio

    2013-08-01

    Full Text Available The flexibility is one of the priorities in manufacturing companies. However, the lack of guidelines for carrying out a critical analysis of the use of resources in manufacturing industry leads to a loss of process performance. This article describes a method to help companies identify the resources needed to provide manufacturing flexibility and meet the demands of their consumers while complying with company strategy. The literature related to flexibility is reviewed and a classification based on four levels is proposed: abilities, dimensions, elements and resources that provide flexibility. Based on this taxonomy and using the principles of QFD (Quality Function Deployment, a method is proposed that shows the correlation between these four levels, starting with customer demand and company strategy. The method was tested in an automobile manufacturing company, showing the applicability of the method. It highlighted the high degree of automation, which’s had serious problems related to restrictions on product mix. It can be inferred that this problem could be minimized by simplifying the tasks involved in the manufacture of car and by hiring more experienced, multi-skilled workers. The proposed method is different from those founded in the literature review because it deploys two levels more of flexibility, considering the QFD structure, and addresses strategic company issues.

  15. A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs)

    OpenAIRE

    Elgadi, Osama; Birkett, Martin; Cheung, Wai Ming

    2015-01-01

    This paper investigates the current quality management processes in use in Libyan Manufacturing Companies (LMCs), and proposes a methodology of mixed method approach to data collection to develop a novel six sigma framework. To date, there is no evidence of the use of six sigma in the Libyan manufacturing industry, and it is found that only 58 companies in Libya currently have ISO 9001 accreditation of which only 9 are manufacturing companies. This underutilisation of manufacturing systems su...

  16. Network master planning for a global manufacturing company

    OpenAIRE

    Heinz, Michael Pierre

    2006-01-01

    Production in global, intra-organisational networks is becoming more common. In this context, the allocation of production quantities to constrained manufacturing capacity is a challenging process. Due to a volatile environment it is argued to be impossible to achieve a ‘clean’ system design with dedicated resources which exactly meets future demand. Thus, recursive ‘Network Master Planning’ (NMP) becomes necessary. The aim of this research is to generate an understanding of th...

  17. Practical Applications of Quality Tools in Polish Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Starzyńska Beata

    2014-08-01

    Full Text Available Background and Purpose: Modern companies have found themselves in a situation where the ability for the dynamic adaptation to the changing market conditions is a key competitive advantage. Therefore they are continually searching for intensive ways of improvement of their processes and products. The basis for the implementation of such strategy is the efficient use of information resources. In quality management, appropriate tools and techniques equip decision-makers with information, necessary to take: correction, corrective, preventive, and finally – improvement actions.

  18. Economic analysis of alternatives for optimizing energy use in manufacturing companies

    International Nuclear Information System (INIS)

    Méndez-Piñero, Mayra Ivelisse; Colón-Vázquez, Melitza

    2013-01-01

    The manufacturing companies are one of the main consumers of energy. The increment in global warming and the instability in the petroleum oil market have motivated companies to find alternatives to reduce energy use. In the academic literature several researchers have demonstrated that optimization models can be successfully used to reduce energy use. This research presents the use of an optimization model to identify feasible economic alternatives to reduce energy use. The economic analysis methods used were the payback and the internal rate of return. The optimization model developed in this research was applied and validated using an electronic manufacturing company case study. The results demonstrate that the main variables affecting the economic feasibility of the alternatives are the economic analysis method and the initial implementation costs. Several scenarios were analyzed and the best results show that the manufacturing company could save up to $78,000 in three years if the recommendations based on the optimization model results are implemented. - Highlights: • Evaluate top consumers of energy in manufacturing: A/C, compressed air, and lighting • Economic analysis of alternatives to optimize energy used in manufacturing • Comparison of payback method and internal rate of return method with real data • Results demonstrate that the company could generate savings in energy use

  19. Good Corporate Governance in Manufacturing Companies Tax Avoidance

    Directory of Open Access Journals (Sweden)

    Uun Sunarsih

    2016-10-01

    Full Text Available This study aimed to examine the effect of good corporate Governance against tax avoidance peroxided by the book tax gap and corporate governance is peroxided by institutional ownership, managerial ownership, independent board, audit committee and audit quality. This study was performed on companies listed on the Stock Exchange on the observation period 2011-2014. The method used is purposive sampling and obtained a sample of 10 companies. The data used is secondary data that can be downloaded through www.idx.co.id and www.sahamok.com.  The results showed that the variables of the board of managerial ownership, independent directors, audit committee, and audit quality effect on tax avoidance while institutional ownership variable has no effect on tax avoidance. It is suspected that institutional ownership as a monitoring tool in any decision taken by the manager does not support an optimal oversight of management performance related to tax evasion.DOI: 10.15408/etk.v15i2.3541

  20. The Analysis of the Use of Outsourcing Services in Logistics by Czech Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Hrusecka Denisa

    2015-09-01

    Full Text Available This research analyses logistics outsourcing services from the viewpoint of client companies (manufacturing companies. The main goal is to show how intensively various logistics outsourcing services are used by Czech manufacturing companies in comparison with other world regions, and which areas of logistics outsourcing should be considered more seriously in order to increase logistic efficiency. The study is based on a quantitative and qualitative investigation of Czech manufacturing companies. Firstly, the brief overview of the present situation in the Czech market is presented. It is based on survey data. The results of this quantitative study are compared with global research activities, especially with the 2013 Third-Party Logistics Study carried out by Capgemini Consulting Company. Next, results of the qualitative investigation are discussed. This part describes the experience of four selected Czech manufacturing companies with logistics outsourcing, the main problems they face in this area and their future plans and expectations. The present study is part of a more complex research currently being carried out by the authors.

  1. A CONTENT ANALYSIS ON MANAGEMENT FASHIONS IN TURKISH MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    Özlem Yaşar Uğurlu

    2013-10-01

    Full Text Available Recently many scholars have paid attention to the concept of management fashions as a new field in organization studies. This research aims to emphasize the awareness of organizations about management fashions and how strongly organizations adopt new management approaches. As a qualitative research a content analysis was applied. Data was obtained from web sites of 79 companies based on the first 500 businesses according to the data of Istanbul Chamber of Industry (2011 and also were listed in Exchange Istanbul’s Industrial index (XUSIN. The findings have shown that strategic management, HRM and TQM are practiced more than organizational learning, innovation and ethics/social responsibility. Theoretical and practical implications are also discussed.

  2. The Fuzzy u-Chart for Sustainable Manufacturing in the Vietnam Textile Dyeing Industry

    Directory of Open Access Journals (Sweden)

    Kim-Phung Truong

    2017-07-01

    Full Text Available The inevitability of measurement errors and/or humans of subjectivity in data collection processes make accumulated data imprecise, and are thus called fuzzy data. To adapt to this fuzzy domain in a manufacturing process, a traditional u control chart for monitoring the average number of nonconformities per unit is required to extend. In this paper, we first generalize the u chart, named fuzzy u-chart, whose control limits are built on the basis of resolution identity, which is a well-known fuzzy set theory. Then, an approach to fuzzy-logic reasoning, incorporating the decision-maker’s varying levels of optimism towards the online process, is proposed to categorize the manufacturing conditions. In addition, we further develop a condition-based classification mechanism, where the process conditions can be discriminated into intermittent states between in-control and out-of-control. As anomalous conditions are monitored to some extent, this condition-based classification mechanism can provide the critical information to deliberate the cost of process intervention with respect to the gain of quality improvement. Finally, the proposed fuzzy u-chart is implemented in the Vietnam textile dyeing industry to replace its conventional u-chart. The results demonstrate that the industry can effectively evade unnecessary adjustments to its current processes; thus, the industry can substantially reduce its operational cost and potential loss.

  3. Using simulation-based optimization to improve performance at a tire manufacturing company

    Directory of Open Access Journals (Sweden)

    Mohamad Darayi

    2013-04-01

    Full Text Available In this paper, a simulation optimization-based decision support tool has been developed to study the capacity enhancement scenarios in a tire manufacturing company located in Iran. This company is experiencing challenges in synchronizing production output with customer demand causing an unbalanced work-in-process (WIP inventory distribution throughout the tire manufacturing process. However, a new opportunity to increase the supplying of raw materials by fifty percent and increase the expected growth in market demand, necessitate this study of the current company situation. This research supported by the company, is to analyze whether the ongoing production logistics system can respond to the increased market demand, considering the raw material expansion. Implementation of a proposed hybrid push/pull production control strategy, together with the facility capacity enhancement options in bottleneck stations and/or heterogeneous lines within the plant, are investigated by the proposed simulation optimization methodology.

  4. EMPIRICAL STUDY ON THE ROLE OF COLLABORATION IN NEW PRODUCT DEVELOPMENT IN MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    Hao Anh Nguyen

    2018-06-01

    Full Text Available This paper provides new empirical evidence on the effects of internal collaboration (manufacturing involvement and external collaboration (supplier and customer involvement practices on NPD performance and success. Moreover, comparing the collaboration practices and their effects on NPD across 10 countries are provided. Data were collected from high-performance manufacturing (HPM project with the sample of 265 manufacturing companies from 10 countries across the world. Descriptive, variance, correlation and regression analysis were conducted by using SPSS 22.0. Significant linkage between three collaboration practices and NPD performance & NPD success was found by statistical analysis. In addition, the results of this study reveal the significant differences in the implementation of collaboration practices across countries and the effects of those practices on NPD performance and success among countries. This study suggests that high performance and high success rate of NPD process could be achieved by external and internal collaboration in manufacturing companies.

  5. Development of Corporate Governance Performance Indicators for Czech Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Pavláková Docekalová Marie

    2015-03-01

    Full Text Available Effective corporate governance is a key element in achieving long-term success for any company. The codes of conduct that corporate governance adopts directly determine the sustainability of business activities. With this in mind, this paper aims to demonstrate the results of research that identifies a set of key indicators of corporate governance performance. The presented research is quantitative. In order to identify key performance indicators, factor analysis was employed. It was found that corporate governance performance is influenced by two factors. For the first factor, the relationship between corporate governance and stakeholders is measured by key indicators: percentage of women within CG, contributions to political parties, politicians and related institutions and number of complaints received from stakeholders. The second factor, strategy & compliance, is generated from the following: percentage of strategic objectives met and total number of sanctions for breaching the law. This research aims to assist both academic and corporate practitioners who want to improve corporate governance performance and, through the use of key performance indicators, support the transparency and sustainability of their business.

  6. SURVEY REGARDING THE LEVEL OF PRODUCT LIFECYCLE MANAGEMENT IN MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    František Freiberg

    2011-12-01

    Full Text Available This article is about a questionnaire survey regarding the level of product lifecycle management in manufacturing companies in the Czech Republic. Based on the research available from foreign and domestic literature, a questionnaire survey was compiled and carried out with the purpose of applying the methods used in the life cycle management in selected areas: maintenance, information systems and the cost of the product lifecycle. The survey is carried out through a printed as well as an electronic questionnaire with additional structured interviews in selected manufacturing companies in the Czech Republic, Slovak Republic and Romania.

  7. Integrate Product Planning Process of OKP Companies in the Cloud Manufacturing Environment

    OpenAIRE

    Zheng , Pai; Xu , Xun; Xie , Sheng ,

    2015-01-01

    Part 8: Cloud-Based Manufacturing; International audience; In today’s competitive market, OKP companies operate in the “engineer-to-order” business mode, whereby analysing the “voice of customer” promptly and accurately in the early design stage determines the success of product development. However, OKP companies have limited resources. They may not be able to afford the cost of the complicated Quality Function Deployment (QFD) product planning process, nor can they obtain abundant CRs infor...

  8. Implementation Of 5S Quality Tool In Manufacturing Company A Case Study

    Directory of Open Access Journals (Sweden)

    Vibhor Kakkar

    2015-02-01

    Full Text Available Abstract 5S system is a technique which maintains the quality of working conditions in the organization. Amongst various available Lean resources 5S is a powerful technique that can bolster objectives of the organization to get continuous improvement in performance and productivity. This paper presents the implementation of 5S in a manufacturing company amp 5S rating system was used to audit all changes in the company which enhanced the efficiency of the workers amp ultimately the productivity of the company is enhanced to 91 .

  9. Implementing Lean Manufacturing in Malaysian Small and Medium Startup Pharmaceutical Company

    Science.gov (United States)

    Ibrahim, Wan Mohd Khairi bin Wan; Rahman, Mohamed Abdul; Abu Bakar, Mohd Rushdi bin

    2017-03-01

    Domestic pharmaceutical industry has been identified by the Malaysian government as an industry to be developed under its 11th economic development plan. Most homegrown pharmaceutical companies fall under the category of small and medium enterprises (SME) and therefore need to be highly efficient in their operations to compete with the multinationals. Though lean manufacturing is a well-known methodology to achieve an efficient operation, only a small percentage of the local SMEs implement it. The study aims to determine the real success factors in lean implementation through systematic review of relevant literature on lean manufacturing implementation in local companies, onsite observation of a selected SME company, Global Factor Sdn. Bhd. (GFSB), that successfully implemented lean manufacturing followed by actual implementation of lean project at IKOP Sdn. Bhd., a small startup pharmaceutical company. Lean tools like Gemba, value stream map (VSM) and spaghetti diagram were used to analyze and improve a process at IKOP Sdn. Bhd. The literature review showed that the implementation of lean manufacturing at Malaysian SMEs involved in pharmaceutical industry is at its infancy. Study at GFSB indicated that successful implementation of lean manufacturing stems from management support, employee’s commitment, government support and knowledge on lean among employees. Application of lean tools in IKOP Sdn. Bhd. to improve the process cycle efficiency of hand sanitizer, i-Hand 4.0, has shown that the GMP guidelines are not jeopardized. The Kaizen improvement project resulted in 46.3% reduction in lead time. It may be concluded that implementing lean manufacturing in any small local startup pharmaceutical company is beneficial in reducing operational costs and increasing the efficiency and effectiveness and does not conflict with the existing GMP guidelines.

  10. A Layered Software Architecture for the Management of a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Domenico CONSOLI

    2011-01-01

    Full Text Available In this paper we describe a layered software architecture in the management of a manufactur-ing company that intensively uses computer technology. Application tools, new and legacy, after the updating, operate in a context of an open web oriented architecture. The software architecture enables the integration and interoperability among all tools that support business processes. Manufacturing Executive System and Text Mining tools are excellent interfaces, the former both for internal production and management processes and the latter for external processes coming from the market. In this way, it is possible to implement, a computer integrated factory, flexible and agile, that immediately responds to customer requirements.

  11. EFFECTING FACTORS DELIVERED FINANCIAL REPORTING TIME LINES AT MANUFACTURING COMPANY GROUPS LISTED IDX

    Directory of Open Access Journals (Sweden)

    Sunaryo Sunaryo

    2012-11-01

    Full Text Available The primary objective of this research is to learn the effect among ROA, Leverage, Company Size, and Outsider Ownership with time lines, either partially or simultaneously. Secondary data were collected by purposive sampling of manufacturing company groups listed on IDX and the preceding scientific research journals, using logistic regression to test the hypothesis simultaneously. The results of this research describe that ROA and Leverage do not significant effect to time lines, but company size and outsider ownership have significant effect to time lines. It is recommended that the topic of this research can be continued with merchandising company groups, or service company groups either general or special, like: hotels, insurances, bankings; or, with new independence variables added. 

  12. Perspectives on the Market Globalization of Korean Herbal Manufacturers: A Company-Based Survey.

    Science.gov (United States)

    Kim, Dongsu; Ahn, Miyoung; Jung, Jeeyoun; Kwon, Soohyun; Park, Eun-Ji; Koo, Ki Hoon; Woo, Jong-Min

    2015-01-01

    The growth of herbal markets has increased substantially in South Korea, but the worldwide market share remains small despite significant governmental efforts. This study aimed to characterize manufacturing employment and identify employees' general perceptions of market expansion. A survey study covering 567 companies was conducted using face-to-face interviews in 2012. Data were analyzed using comparisons among three manufacturing groups (i.e., the herbal dietary supplement manufacturing group, the herbal medicine manufacturing group, and the personal care product manufacturing group) or among the manufacturers themselves. We found that the majority of the manufacturing employee respondents were regular permanent and production workers. The domestic distributors were primarily chain stores/direct outlets or retailers/wholesalers, and the dominant product was red ginseng (hongsam). Although the responding companies exhibited a variety of perspectives, "advertisement/public relations" was cited as the most important factor in the development of the herbal industry. In contrast, "low manpower/seeking business partners" were the most crucial limiting and challenging factors for market globalization. Our results can be used to design a proper national plan by reducing the gaps in perspective between herbal product producers and policy makers.

  13. Perspectives on the Market Globalization of Korean Herbal Manufacturers: A Company-Based Survey

    Science.gov (United States)

    Kim, Dongsu; Ahn, Miyoung; Jung, Jeeyoun; Kwon, Soohyun; Park, Eun-Ji; Koo, Ki Hoon; Woo, Jong-Min

    2015-01-01

    The growth of herbal markets has increased substantially in South Korea, but the worldwide market share remains small despite significant governmental efforts. This study aimed to characterize manufacturing employment and identify employees' general perceptions of market expansion. A survey study covering 567 companies was conducted using face-to-face interviews in 2012. Data were analyzed using comparisons among three manufacturing groups (i.e., the herbal dietary supplement manufacturing group, the herbal medicine manufacturing group, and the personal care product manufacturing group) or among the manufacturers themselves. We found that the majority of the manufacturing employee respondents were regular permanent and production workers. The domestic distributors were primarily chain stores/direct outlets or retailers/wholesalers, and the dominant product was red ginseng (hongsam). Although the responding companies exhibited a variety of perspectives, “advertisement/public relations” was cited as the most important factor in the development of the herbal industry. In contrast, “low manpower/seeking business partners” were the most crucial limiting and challenging factors for market globalization. Our results can be used to design a proper national plan by reducing the gaps in perspective between herbal product producers and policy makers. PMID:26199635

  14. The link between competences and company success in Danish manufacturing companies

    DEFF Research Database (Denmark)

    Bove, Karsten; Harmsen, Hanne; Grunert, Klaus G.

    2000-01-01

    were inductively identified in qualitative interviews with top managers, following a managerial cognition approach. The results were used as input for a representative study of manufacturing firms in Denmark, where the most important competencies were identified. The data analysis revealed 10 key...... competencies: Sales competence, production management, internal market orientation, product development, image, strategy and vision, customer knowledge, quality management, surveillance and marketing competence. The performance on these competencies and background variables were then related to success...

  15. From means to ends: the transformation of ERP in a manufacturing company

    NARCIS (Netherlands)

    Boersma, F.K.; Kingma, S.F.

    2005-01-01

    In this paper, we present a case study of the restructuring of an Enterprise Resource Planning (ERP) system within a manufacturing company, in particular the combination of Material Requirement Planning (MRP) with a Just In Time (JIT) material management procedure at the assembly lines. We focus in

  16. Determinants of RFID Adoption in Supply Chain among Manufacturing Companies in China: A Discriminant Analysis

    Directory of Open Access Journals (Sweden)

    Suhaiza Zailani

    2009-05-01

    Full Text Available The growth of China’s economy hinges to a large extent on the ability of the industry to operate more efficiently and effectively in the global supply chain system. China’s manufacturing companies should pay attention to adopt more efficient supply chain technologies to provide better services for their customers. China has initially carried out research and development and industrialization of technology related to RFID and begun to apply in some areas in recent years. This article studies the determinant factors of the RFID adoption by manufacturing companies in China. The population of this study is manufacturing companies in China that are registered under Federation of China Manufacturers. A questionnaire survey is conducted to study the adoption of RFID by China’s manufacturing industry. This study reveals that the environment, organization, technology and product have the impact on the adoption of RFID in China. Organization should be given strategic attention to improve employee participation in adopting RFID as a strategic tool.

  17. Evaluation of the administration of the solid waste in the Manufacturers Companies of Costa Rica

    International Nuclear Information System (INIS)

    Azofeifa Olivares, R.

    2001-01-01

    The current administration of the solid waste should be evaluated in order to verify the manufacturer companies reuse, recycle and the appropriate management of the c. By means of field investigation, the generation, storage, gathering, treatment, and final disposition of the solid waste of the construction are evaluated in different types of companies. It is concluded that the manufacturer companies in our country do not carry out an appropriate administration of the solid waste.While in the technical specifications or in the bid poster the way they should have the waste is not demanded, they will continue improperly managing the residuals, impacting the environment in an irrational way. The mitigation measures are recommended to the problem of the bad administration of the waste and they think about the necessary limits to implement in the bid posters the appropriate administration of the solid waste. (Author) [es

  18. The main challenges for manufacturing companies in implementing and utilizing configurators

    DEFF Research Database (Denmark)

    Kristjansdottir, Katrin; Shafiee, Sara; Hvam, Lars

    2018-01-01

    Companies providing customized products increasingly apply configurators in supporting sales and design activities, thus improving lead-times, quality, cost, benefits perceived by customers, and customer satisfaction. While configurator advantages have been substantially investigated....... Finally, it is investigated whether the importance of the main categories of challenges varies according to a number of potential context variables. The results of the survey, which studies manufacturing companies that use configurators in providing customized products, offer new insights......, the challenges of implementing and utilizing configurators have less often been considered. By reviewing relevant literature, the present study first categorizes the main challenges faced by manufacturing companies when implementing and utilizing configurators. Six main categories of challenges are identified...

  19. TF4SM: A Framework for Developing Traceability Solutions in Small Manufacturing Companies

    Science.gov (United States)

    Bordel Sánchez, Borja; Alcarria, Ramón; Martín, Diego; Robles, Tomás

    2015-01-01

    Nowadays, manufacturing processes have become highly complex. Besides, more and more, governmental institutions require companies to implement systems to trace a product’s life (especially for foods, clinical materials or similar items). In this paper, we propose a new framework, based on cyber-physical systems, for developing traceability systems in small manufacturing companies (which because of their size cannot implement other commercial products). We propose a general theoretical framework, study the requirements of these companies in relation to traceability systems, propose a reference architecture based on both previous elements and build the first minimum functional prototype, to compare our solution to a traditional tag-based traceability system. Results show that our system reduces the number of inefficiencies and reaction time. PMID:26610509

  20. Analysis of financial soundness of manufacturing companies in Indonesia Stock Exchange

    Directory of Open Access Journals (Sweden)

    Widi Hidayat

    2016-07-01

    Full Text Available This study aims to provide information to the issuer and Bapepam and Indonesian Institute of Accountants with additional important information content of ratings and financial soundness of the indicators that do not harm investors. This is an explanatory and descriptive nature of causality using quantitative methods, using all companies listed on the Indonesia Stock Exchange (ISE taken as the sample. The data were analyzed using discriminant statistical analysis tools are processed with SPSS. The results showed that the level of financial soundness of the manufacturing industries listed on the ISE such as 23 (62% Companies Current Asset Growth (CAG is low as well as Fixed Asset growth (FAG 28 (76% companies is still low, Equity Growth (EqG by 27 (73% the company, Revenue growth (RG 27 (65% companies and Net Income Growth (NIG 35 (95% firms. Two manufacturing companies have a very high NIG, thus, NIG average is very high. The seven models of financial soundness were tested based on the growth of corporate finance such as CAG, FAG, LG, EqG, RG, ExG and NIG. Only one model is not significant, the model RG, while the other model is a significant, with a significant difference be-tween the growths rates of the sound and unsound corporate finances industry groups.

  1. A Strategic Knowledge Map for the Research and Development Department in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Śliwa Małgorzata

    2016-01-01

    Full Text Available Knowledge is a corporate resource, being grounds for initiating activities, which is important in a dynamic economy. The difficulties related to obtaining tacit knowledge, related primarily to experience and observation of the knowledge employee (Mendryk, 2011, encourage the companies to use tools supporting knowledge management and location. This article attempts at designing a dedicated, strategic knowledge map for a research and development department in a manufacturing company. Based on the reference works, the detailed characteristics of specific sources of knowledge in a manufacturing company and tools supporting the process of converting the tacit knowledge into explicit one, for example, the knowledge maps, were devised. Then, a strategic knowledge map model was designed for the research and development department (hereinafter abbreviated as SKM – R&D in the manufacturing company, comprising the following components: (1 fields of knowledge, (2 internal and external processes in the R&D department, and (3 sources of knowledge. Then, a practical implementation of the SKM – R&D model was presented.

  2. Manufacturing and service opportunities for Canadian companies in large wind turbines

    International Nuclear Information System (INIS)

    Wittholz, H.; Lacroix, A.

    2003-04-01

    This report presents an overview of the wind power industry and recommends initiatives for Canadian companies to embark in an industry with promising growth opportunities. Wind energy is the fastest growing source of energy with many associated manufacturing and service opportunities and employment benefits. In 2001, the wind energy industry invested US$5.2 billion worldwide. The average size of a large wind turbine is approximately 1.0 MW for on-shore sites and 2 to 5 MW for offshore applications. The technology is dominated by European companies, with the top 10 turbine manufacturers supplying more than 90 per cent of the global market. This report investigates the risks and opportunities available for Canada in the service and manufacturing sectors of the wind energy industry. In addition, 17 wind turbine components and subsystems in mechanical and electrical parts are described. It was suggested that, given the technology that is currently available in Canada, the greatest manufacturing opportunities lie in the development of rotor blades, towers, base frames, vibration mounts and generators. The report also defines market entry barriers and presents solutions. It was emphasized that timing to the market is critical because it will be more difficult to enter the competitive market in the coming years. The author suggests a target of 20 per cent of North American wind energy market for Canadian companies by 2020, equivalent to US$2.68 billion in annual sales and 58,800 jobs. 6 refs., 6 tabs., 1 fig

  3. Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

    Science.gov (United States)

    Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

    2013-04-01

    This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

  4. Globes and Teaching Aids Manufactured by Jan Felkl Company for the Polish Market

    Directory of Open Access Journals (Sweden)

    Malgorzata Taborska

    2016-05-01

    Full Text Available Jan Felkl company from Roztoky (Roztok near Prague manufactured globes in seventeen language versions, since 1861 also in Polish language. The company was active until 1952, but it ceased to manufacture Polish-language globes as early as in 1914. In the aftermath of the First World War, and with the development of printing business, the demand for Czech globes shrank. It is difficult to estimate the overall output of Polish- language globes manufactured by Felkl’s company throughout the 53 years it operated. From catalogues and the surviving globes we know that terrestrial globes in six sizes, folding globes in two sizes, celestial globes (probably in four sizes, as well as telluria, lunaria and planetaria were manufactured for the Polish market. It is difficult to decide how many editions of individual types of globes were issued. Polish names were compiled by Franciszek Waligórski (one globe and Mirosław Suchecki. Only 28 globes have survived to this day, including one celestial globe. Most of them are globes of an 8-inch diameter, approved by the Austrian ministries as teaching aids for schools. Nearly half of the surviving globes date from the years 1894–1914. Only ten items are in museums.

  5. What is safety culture and risk-taking like at a large steel manufacturing company?

    Science.gov (United States)

    Nordlöf, Hasse

    2012-01-01

    Focus group interviews were conducted at a large steel manufacturing company with 1000 employees, in order to answer the research question: what is the safety culture and risk-taking like at the company, according to employees? Ten focus groups were used for data collection consisting of 6-8 employees each. The participants were operators from production. The interviews lasted 75 min and were digitally recorded and thereafter verbatim transcribed. Descriptive data was also collected from all participants by allowing them to fill out a short questionnaire. The results of this study will be presented at the conference as a poster presentation.

  6. The Balance Sheet As an Earnings Management Constraint (Case Study In Indonesia Manufacture Company

    Directory of Open Access Journals (Sweden)

    Dwi Sudaryati

    2015-11-01

    Full Text Available This research has the purpose to examine the balance sheet existence as an earnings management constraint. This research use the secondary which it is taken from the quarterly financial statement of manufacture companies listed on Indonesia Stock Exchange (IDX during 2008-2009 periods. This research used 68 manufacture companies as its sample. Then, the obtained data has regression analyzed by Generalized Ordered Logit Model. The Output of regression indicates that there is significant relation between net assets with the earnings surprise. The reporting earnings surprise smaller negative or larger positive decrease when the value of net asset is overstated. So, it can be concluded that balance sheet is as an earnings management constraint.

  7. Weather as a Competitive Factor between Local and Foreign Manufacturing Companies in Russia

    OpenAIRE

    Leppänen, Simo; Ledyaeva, Svetlana; Kosonen, Riitta

    2016-01-01

    Globalisation has sparked academic interest in companies’ competitive factors and a myriad of internal and external competitive factors have been studied. However, to our knowledge the weather of the host country has not been under study even though weather has been demonstrated to affect economic activity. This paper utilises a company-level panel data to analyse if weather has an impact on domestic and foreign manufacturing companies’ operations in Russia. Temperature was identified to have...

  8. Application of Lean Focus onManufacturing Process : A Case Study of an American Furniture Company

    OpenAIRE

    ZHAO, QIAN; ZHOU, BOWEN

    2010-01-01

    Introduction: To improvement the target company’s manufacturing process by applyinglean principles, including using and analyzing the internal value stream mapping. Asmore and more companies have paid attention to implement lean thinking in theirmanufacturing process, the value stream mapping played an important role for manycompanies to make a transition from their traditional production systems to lean systems.The content and resources of this master thesis come from an American furnitureco...

  9. Analysis of Factors Affecting Manufacturing Companies in Indonesia Performing a Switching Auditor

    Directory of Open Access Journals (Sweden)

    Atika Sukma Winata

    2017-03-01

    Full Text Available This study aims at analyzing the influence of the Public Accountant Firms Size, Size of Company, Financial Distress, Audit Opinion and Management Turnover toward Auditor Switching. The population of this study is a manufacturing company listed on the Indonesia Stock Exchange during the period 2011-2015 consisting of 134 companies. The sample was obtained by purposive sampling technique which resulted in the sample of 26 companies. Methods of data analysis using logistic regression and SPSS 21 using data and other information obtained from Annual Report. Results of this study shows that the Public Accountant Firms Size and Management Turnover have significant impact toward auditor switching, size of company have influence auditor switching. Financial distress and audit opinion did not effect auditor switching significantly. The value of Nagelkerke R Square is 0.283. conclusions of this study is the Public Accountant Firms Size and Management Turnover have significant impact toward auditor switching, size of company have influence auditor switching. Financial distress and audit opinion did not effect auditor switching significantly.

  10. Stimuli of Collaboration in Product Development: A Case Study in a Project Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Jääskeläinen Aki

    2017-12-01

    Full Text Available There is already a wide acceptance on the importance of involving supplier and customer companies in product development. Decent understanding prevails on the relationship-oriented approach to product development including various collaboration forms. However, there is less research on the factors explaining the decision of attending to joint product development. In addition, less studies have examined the integrated role of both suppliers and customers in product development initiatives. This study searches answers to the following research questions: 1. What is the role of different actors in product development initiatives? 2. What factors motivate suppliers and customers to participate in product development? The research is carried out as an in-depth qualitative single case study in a large project manufacturing company. It takes the perspective of a focal company striving for product improvements. The first part of the empirical study consists of 15 semi-structured interviews. The second part includes two discursive workshops and builds upon the results of the interviews. This study contributes to the existing research by explaining the challenges and conditions facilitating joint product development with supplier and purchaser companies. The results highlight the role of customers in improving the effectiveness of product development. As a practical contribution, the paper reports the application of workshop method as a facilitator of collaboration between supplier, purchaser (focal company and customer companies.

  11. IMPACTS OF OWN BRANDS STRATEGY ON MANUFACTURER – RETAILER RELATIONSHIP: CASE STUDIES IN LARGE SIZE COMPANIES

    Directory of Open Access Journals (Sweden)

    Renato Telles

    2012-05-01

    Full Text Available The study of marketing and production strategy of own brand products requires an understanding of both the benefits gained by retailers and manufacturers involved in this activity and also the effects of this strategy on the relationship between these companies. According to this idea, a qualitative and descriptive work was conducted, based on six case studies, three of them on large product manufacturers and three on large retailers. The aim of this study is defined is threefold: (1 to analyze the expectations of manufacturers and retailers with their own brands’ current operations, (2 to analyze the expectations of manufacturers and retailers with their own brands’ future operations, and (3 to analyze the influence of the own brands adoption on the relationship between manufacturers and retailers. The results indicate that (a current operations are primarily based on economic reasons (market share, and use of spare capacity, (b future operations are perceived from a marketing perspective (survival, and (c the adoption of own brand strategy does not harm the relationship between the parties – both manufacturers and retailers –, unlike the earlier studies indicated.

  12. Web-Based Implementation of E-Marketing to Support Product Marketing of Chemical Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Riswan Efendi Tarigan

    2015-10-01

    Full Text Available Currently, many company’s marketing strategies are limited only to face-to-face communication, telephone, facsimile, company portfolio, and product brochures. However, those marketing strategies are well- known to have limited impacts. Therefore, the presence of e-marketing as one of the marketing strategies would be appropriate to cover the weaknesses and to solve a number of the marketing problems. The purpose of this study is to discuss matters related to marketing, such    as, proposing a marketing plan using website, expanding marketing segment, and introducing existing  products for a chemical manufacturing company. The adopted research method is a descriptive method where the study is directly performed on the research object to acquire necessary data. The collected data are further analyzed using the Porter’s Five Force and SWOT analysis. Fi- nally, the work provides a number of recommendations for implementing e-marketing strategies to support the company business.

  13. (Dysfunctionality of accounting cost systems in manufacturing companies of Tuzla canton

    Directory of Open Access Journals (Sweden)

    Sado Puškarević

    2014-12-01

    Full Text Available This paper shows the results of the conducted primary survey on functionality of cost systems in manufacturing companies of Tuzla Canton (hereinafter “TC”. This paper assesses their adequacy to the needs of these companies: the present needs, and the ones that will be brought by the changes in the environment. These systems have to be up-to-date, as they influence the process of cost management, which is the key factor of companies’ adaptation to the conditions of a modern market. Cost management, which is based on the information of a cost system, enables the company to take the adequate stand towards customers on markets and toward their competition. Also, the quality cost information is a precondition for effective and efficient allocation of limited resources in a transitional period of society development. Therefore, only quality designed cost system in transitional economy will enable recovery, and then, growth and development of a company. This emphasizes the importance of research of the stated issues for transitional countries. The research results should also help to persuade the management about the need to modernize the operation organization, primarily the accounting function, mainly in the part of cost system organization. The determined defects, as well as deviances in relation to current needs for information about costs, are guidelines for an adequate process of redesigning cost systems in companies of transitional economy.

  14. Modified magnetite nanoparticles with cetyltrimethylammonium bromide as superior adsorbent for rapid removal of the disperse dyes from wastewater of textile companies

    Directory of Open Access Journals (Sweden)

    Ali Asghar Rajabi

    2016-01-01

    Full Text Available This paper reports application of cetyltrimethylammonium bromide (CTAB coated magnetite nanoparticles (Fe3O4 NPs as a novel adsorbent for removal of two types of disperse dyes, including disperse red 167, and disperse blue 183, from wastewater of textile companies. The effect of parameters including type of surfactant, pH of solution, surfactant concentration, and amount of salt, was investigated and optimized. The obtained results showed that the ratio of initial dye concentration to CTAB amounts has critical effect on removal processes so that removal efficiencies higher than 95% can be achieved even at high concentration of dyes as high as 500 mg l-1 when the ratio is optimum. Removal of dyes is very fast, and equilibrium is reached at times less than 10 min even for high concentration of the dyes. Very high adsorbent capacity (as high as 2000 mg g-1 was yielded for maximum tested concentration of the dyes (500 mg g-1. The obtained result was confirmed by thermogravimetric analysis data. This study showed that CTAB coated Fe3O4 NPs is a very efficient adsorbent for removal of dyes from wastewater of textile companies and has high capacity under optimum conditions.

  15. Developing and Managing Cross-Functional Teams: A Multi-Case Study of Brazilian Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Márcio Lopes Pimenta

    2014-06-01

    Full Text Available The growth of industries and the strong economic base in Brazil require improvements and adaptations in business processes. Cross-functional teams (CFT may help to companies achieve these improvements. This research looks at characterizing CFT according to application processes, structures, objectives and impacts, considering the context of demand planning and related processes. In-depth interviews with 22 managers were performed in three Brazilian manufacturing companies. A framework to characterize CFT and respective impacts is proposed, including elements such as: procedures, context and goals, power distribution, impacts on cross-functional integration, impacts on teams' performance and on organization's performance. One significant managerial finding is that effective and efficient CFTs need balanced distribution of power among members by effectively establishing and structuring the team. By doing this, managers may observe positive impacts on inter-functional integration and in firm's results. Moreover, teams should permanently perform joint planning to predict unfavorable situations, improve communication and mutual understanding.

  16. Equipment and Analytical Companies Meeting Continuous Challenges May 20-21 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

    2015-03-01

    This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white

  17. Study on the Reasons and Countermeasures for Loss of Listed Companies in Manufacturing Industry

    Institute of Scientific and Technical Information of China (English)

    Yong; DU; Jun; DU; Bo; YAN

    2013-01-01

    In combination with the data of loss-making listed companies in manufacturing industry at capital market in 2008-2010,this paper analyzed the characteristics of loss of listed companies.Major reasons include the blind investment of management personnel,low operation and management level,blind pursuit of diversified operation,improper stock right structure,weak supervision of government,and imperfect delisting system.Finally,it came up with some countermeasures,including improving quality of management personnel,management personnel selecting proper investment projects,strengthening internal management of enterprise,implementing effective asset rearrangement,setting up effective incentive and restrictive mechanism,bringing into play regulation function of banks,improving delisting mechanism,reducing centralization of state owned stock right,and establishing and improving market information disclosure system.

  18. Postural loading assessment in assembly workers of an Iranian telecommunication manufacturing company.

    Science.gov (United States)

    Kamalinia, Mojtaba; Nasl Saraji, Gebreal; Kee, Dohyung; Hosseini, Mostafa; Choobineh, Alireza

    2013-01-01

    Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.

  19. TQM in Construction and Manufacturing Companies of Pakistan: A Case Study

    Directory of Open Access Journals (Sweden)

    Nafees Ahmed Memon

    2013-04-01

    Full Text Available The role of construction quality and continuous improvement is vital in the development of construction industry of developing countries. Construction quality and continuous improvement is linked with the adoption of quality management systems in construction companies. This paper highlights the importance of TQM (Total Quality Management and presents the benefits of TQM gained by construction organizations in worldwide construction sector. It examines and contrasts the level of acceptance and execution of TQM in construction and manufacturing sector of Pakistan. The paper also identifies the barriers in adoption of TQM and advantages of implementing TQM in construction sector of Pakistan. In the end, the paper presents some suggestions and steps for the implementation of TQM in construction companies of Pakistan. The findings and recommendations of the study are not only beneficial for the construction sector of Pakistan but also these will be helpful to other developing countries having similar scenarios.

  20. Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

    2015-03-01

    This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white

  1. Using the AHP Method to Select an ERP System for an SME Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Kłos Sławomir

    2014-09-01

    Full Text Available This paper proposes the application of the Analytic Hierarchy Process method to support decision making regarding the selection of an Enterprise Resource Planning system in a manufacturing company. The main assumption of the work is that the management of the selection of an ERP system should consider that the most important selection criteria are concerned with the functionality of the ERP system. Besides this, the aspects of total cost of ownership, technical support and implementation time or vendor experience are taken into consideration to guarantee a successful ERP implementation. The proposed procedure of an ERP system selection is dedicated for small and medium manufacturing enterprises. A structure of attributes for the AHP method is proposed on the basis of an analysis and identification of critical success factors. Different kinds of production (make-to-stock, make-to-order and engineer-to-order are taken into consideration. Illustrative examples are also given.

  2. Bringing service design to manufacturing companies: integrating PSS and service design approaches

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2018-01-01

    in a manufacturing industry. This paper details how the application supports the design of product–service system solutions from the exploration to the implementation stages, highlighting the physical evidence of service, and contributes to advance design research at the intersection of PSS and Service Design.......Manufacturing companies increasingly try to innovate in their offers to consumers by creating more complete solutions that combine product and service components. However, shifting from a product-centric perspective to a solution-oriented perspective is challenging. The present study adopted...... a design research methodology and built on Service-Dominant logic, integrating the human-oriented perspective of Service Design with an organizational network-oriented perspective of Product–Service System. It creates a new Integrative PSS approach, evolves design models, and provides an application...

  3. Investigation of musculoskeletal symptoms in a manufacturing company in Brazil: a cross-sectional study.

    Science.gov (United States)

    Hembecker, Paula K; C Reis, Diogo; Konrath, Andréa C; A Gontijo, Leila; D Merino, Eugenio A

    Musculoskeletal disorders are prevalent and represent the most common health problem among the working population in industrially-developing countries, with considerable costs and impact on quality of life. Despite the high incidence of disability insurance claims among Brazilian manufacturing-sector workers, only a few studies assessed musculoskeletal disorders prevalence. To provide information on the prevalence of musculoskeletal disorders among manufacturing-sector workers and to explore the relationship between musculoskeletal disorders and sociodemographic and occupational characteristics in a medium metallurgical company located in Brazil. A cross-sectional study was carried out. Data was collected through the use of a specifically-designed questionnaire and the items used to collect musculoskeletal disorders data were based on the Nordic Musculoskeletal Questionnaire. Descriptive statistics were used and multivariate logistic regression analysis (plogistic regression analysis showed that company experience (p=0.02), presence of sleep disorders (p=0.00), self-reported general health state (p=0.00) and perform work pause (p=0.00) were significant risk factors for development of musculoskeletal disorders. Sociodemographic and work-related aspects are influential risk factors for musculoskeletal disorders. These results add comprehension about musculoskeletal disorders prevalence and suggest a need for greater emphasis on prevention strategies. Copyright © 2017 Associação Brasileira de Pesquisa e Pós-Graduação em Fisioterapia. Publicado por Elsevier Editora Ltda. All rights reserved.

  4. The Case of a Newly Implemented Modern Management Accounting System in a Multinational Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Daniel Watts

    2014-06-01

    Full Text Available Contemporary management accounting techniques (such as TQM, BSC, JIT are widely lauded by academia but the proposed relevance to business has not necessarily the view held by industry (e.g. Burns & Vaivio, 2001; Chenhall & Langfield-Smith, 1998; Innes et al., 2000. The purpose of this article is to investigate the acquisition by a modern multi-national firm of a major IT-based management accounting program to assess the relevance and usefulness of its functionality by identifying the type(s of systems that are utilised and the rationale for upgrading or modifying its system(s. This study relies on a single case based on two in-depth semi structured interviews with accounting and finance professionals in a multi-national manufacturing company that recently implemented a modern management accounting system. The findings indicate that despite demonstrating some relevance of the management accounting information, the manufacturer deactivated components of the system that were deemed irrelevant at particular levels of the organisation. This paper provides evidence about the non-reliance on management accounting information in a multinational company operating in Australia. The findings in the study imply that relevance is linked to implementation, planning and training will help managers to better prepare themselves in setting up contemporary management accounting systems.

  5. Methods for automated semantic definition of manufacturing structures (mBOM) in mechanical engineering companies

    Science.gov (United States)

    Stekolschik, Alexander, Prof.

    2017-10-01

    The bill of materials (BOM), which involves all parts and assemblies of the product, is the core of any mechanical or electronic product. The flexible and integrated management of engineering (Engineering Bill of Materials [eBOM]) and manufacturing (Manufacturing Bill of Materials [mBOM]) structures is the key to the creation of modern products in mechanical engineering companies. This paper presents a method framework for the creation and control of e- and, especially, mBOM. The requirements, resulting from the process of differentiation between companies that produce serialized or engineered-to-order products, are considered in the analysis phase. The main part of the paper describes different approaches to fully or partly automated creation of mBOM. The first approach is the definition of part selection rules in the generic mBOM templates. The mBOM can be derived from the eBOM for partly standardized products by using this method. Another approach is the simultaneous use of semantic rules, options, and parameters in both structures. The implementation of the method framework (selection of use cases) in a standard product lifecycle management (PLM) system is part of the research.

  6. Exploring the Pattern of Internal Communication in Total Quality Management Implementation in Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Samsudin Sharina

    2017-01-01

    Full Text Available Communication is an important aspect of organizational dynamic process and it is irrefutable one of the critical success factors of the Total Quality Management (TQM implementation. Although there are increasing awareness concerning the importance of internal organizational communication, knowledge appears to have rarely translated into practice or there is lack of guidance to effectively practicing it. Therefore, a study was proposed to investigate the pattern of internal communication practice in TQM implementation. This paper concerns on focusing into internal communication practices in TQM implementation factors and the communication patterns in terms of message forms and mediums of communication to convey TQM messages. Reliability and Factor analysis were carried out to confirm items that form each factor in internal communication in TQM implementation. Based on the analysis of survey questionnaires distributed to 104 large manufacturing companies implementing TQM in Malaysia, it was found that there are certain communication patterns practice by the management when conveying and disseminating TQM messages, but they have no specific guidelines. Therefore, the internal communication practices are not well planned. Finally, it is suggested that further research should be carried out to explain clearly the role and strategy of communication on this issue in order to boost the success of TQM implementation particularly in manufacturing company.

  7. Empowerment: estudo de casos em empresas manufatureiras Empowerment: a case study in manufacturing companies

    Directory of Open Access Journals (Sweden)

    Claudia Heloisa Ribeiro Rodrigues

    2004-08-01

    Full Text Available O objetivo deste artigo é analisar o desenvolvimento do empowerment em duas empresas manufatureiras. Empowerment é uma abordagem de projeto de trabalho que objetiva a delegação de poder de decisão, autonomia e participação dos funcionários na administração das empresas. Analisa-se o desenvolvimento do empowerment por meio dos estágios evolutivos das áreas de gestão, das configurações organizacionais, das estratégias competitivas, da gestão de recursos humanos e da qualidade. Apresenta-se um estudo de casos em duas empresas manufatureiras do interior de São Paulo, a fim de se analisar o grau de participação dos funcionários de acordo com o estágio evolutivo de suas áreas de gestão. Nas conclusões, discutem-se os fatores favoráveis, as particularidades e limitações do empowerment com base nos estudos de casos.An analysis is made here of the empowerment implementation process in two manufacturing companies. Empowerment is a work design approach aimed at delegating decision making, autonomy and employee participation in company management. The development of empowerment is analyzed through the evolutionary stages of management areas, organizational configurations, competitive strategies, and human resources and quality management. A case study of two manufacturing companies in the state of São Paulo was conducted to analyze the degree of employee participation according to the stages of evolution of their management areas. The conclusions section of this article discusses the favorable factors, peculiarities and limitations of empowerment revealed during these case studies.

  8. Does Business Model Affect CSR Involvement? A Survey of Polish Manufacturing and Service Companies

    Directory of Open Access Journals (Sweden)

    Marzanna Katarzyna Witek-Hajduk

    2016-02-01

    Full Text Available The study explores links between types of business models used by companies and their involvement in CSR. As the main part of our conceptual framework we used a business model taxonomy developed by Dudzik and Witek-Hajduk, which identifies five types of models: traditionalists, market players, contractors, distributors, and integrators. From shared characteristics of the business model profiles, we proposed that market players and integrators will show significantly higher levels of involvement in CSR than the three other classes of companies. Among other things, both market players and integrators relied strongly on building own brand value and fostering harmonious supply channel relations, which served as a rationale for our hypothesis. The data for the study were obtained through a combined CATI and CAWI survey on a group of 385 managers of medium and large enterprises. The sample was representative for the three Polish industries of chemical manufacturing, food production, and retailing. Statistical methods included confirmatory factor analysis and one-way ANOVA with contrasts and post hoc tests. The findings supported our hypothesis, showing that market players and integrators were indeed more engaged in CSR than other groups of firms. This may suggest that managers in control of these companies could bolster the integrity of their business models by increasing CSR involvement. Another important contribution of the study was to propose and validate a versatile scale for assessing CSR involvement, which showed measurement invariance for all involved industries.

  9. Lean Manufacturing Implementation for Multinational Companies with Production Subsidiary in Brazil: Development of A Roadmap

    Directory of Open Access Journals (Sweden)

    L. Goehnera,

    2016-06-01

    Full Text Available Foreign multinational companies with a production subsidiary in Brazil are in general recognized as high-level productive companies; however, their productivity potential is mostly not fully achieved. Lean Manufacturing (LM has been proved as a valuable aid to achieve competitiveness in the long run. Regarding the rising importance of successfully implementing LM at multinationals in Brazil and an apparent lack of discussion regarding LM in Brazil this paper aims to propose a comprehensive implementation roadmap, which enables a multinational on a basis of a systematic approach, to achieve an advanced sustainable LM system in a practical manner. The insights of literature and case studies are combined to develop the roadmap. The roadmap was developed so that both companies, those, which have not started yet their journey towards LM, as well as those that have taken already the first steps can use the roadmap. However, the roadmap was built on a broad empirical basis. It should be noticed that it is impossible to consider all factors influencing the LMI at multinationals operating in Brazil in a real world setting. As a result, the roadmap should not be regarded as a ready implementation plan, which has to be strictly followed. Instead, it should be seen as a guideline, which helps a multinational to develop its own, detailed and fitted plan for successfully implementing LM and establishing a learning organization.

  10. Key Supplier Relationship Management: The Case of Croatian Medium-Sized and Large Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Dario Miočević

    2011-06-01

    Full Text Available The key supplier relationship management represents a vital organizational process. Companies should pay attention not only to managing customer relationships but also to managing relationships with suppliers in order to perform well. They should identify the extent to which a certain supplier adds value through the procurement process. In this line of reasoning, both theory and practice make a distinction between strategic (key and non-strategic (transactional suppliers. By employing the segmentation of the supply market, companies balance their supplier portfolio and are capable of identifying the key suppliers. They can also develop specific programs and initiatives that are aimed at preserving these relationships. In the empirical part of the paper, a survey was conducted on a sample of 123 medium-sized and large Croatian manufacturing companies. The structural model involving the relationship between the key supplier relationship management and value-oriented purchasing was tested. The results indicate that there is a statistically direct, positive and significant relationship between these two constructs. Likewise, the results stress that a theoretical conceptualization and operationalization of the key supplier relationship management construct is both valid and justified. Finally, the theoretical and practical implications and limitations of this study are offered.

  11. Innovation performance in service companies and KIBS vis-à-vis manufacturing: the relevance of absorptive capacity and openness

    Directory of Open Access Journals (Sweden)

    Aurora A. C. Teixeira¹ ² ³

    2016-06-01

    Full Text Available Purpose – The present paper adds to the most recent current of literature that highlights the importance of innovation in services, analyzing a setting – Portugal – which is relatively backward in terms of innovation performance. Design/methodology/approach – Based on a sample of 4128 companies (including 1489 service companies that answered the Community Innovation Survey 2008, we assessed, by resorting to logistic regressions, the determinants of innovation performance in Portuguese companies. Findings – 1 Workers who have the 1st cycle of higher education have a positive and significant impact on the innovation of service companies whereas PhDs are detrimental to companies’ innovative performance; 2 Companies in the service sector in general, and in KIBS in particular, that effectively invest in external and (continuous internal R&D activities are more innovative; 3 External scientific sources of information for innovation are crucial (and much more than in manufacturing to the innovation performance of service companies, especially of KIBS; 4 Similarly to manufacturing, participation in innovation activities in cooperation with foreign partners appears as a key factor in the innovative performance of service companies. Originality/value – The study demonstrates the influence of companies’ openness and the relative importance attributed to different sources of information for innovation on innovation outcomes of service companies (and KIBS compared to manufacturing industries.

  12. The Analysis of Company Characteristic Influence Toward CSR Disclosure: Empirical Evidence of Manufacturing Companies Listed in Jsx

    OpenAIRE

    Rahman, Arief; Widyasari, Kurnia Nur

    2008-01-01

    This paper investigates the influence of company characteristic toward Corporate Social Responsibility disclosure. The research is using the proxy of management ownership, leverage, size, profitability and company profile as the variable of company characteristic, while the CSR disclosure, unlike the previous researches, is proxied by dummy score from the companies' mandatory disclosure based on the items of Public Environmental Reporting Initiative (PERI) and Global Reporting Initiative Soci...

  13. Sources and effects of work-related stress among employees in foreign-owned manufacturing companies in Ogun state, Nigeria

    Directory of Open Access Journals (Sweden)

    Ajibade David

    2016-12-01

    Full Text Available This study investigates the sources and effects of work-related stress among employees in foreign owned manufacturing companies in Ogun State, Nigeria. The study used cross sectional descriptive design and a total of three hundred and two (302 respondents were selected using stratified random sampling technique from five randomly selected foreign-owned manufacturing companies. Data were collected using questionnaire and statistically analysed using frequencies, percentages and weighted means. The study reveals factors such as unfavourable physical working conditions, job insecurity, poor career development, and long working hours fostering stress on employees in the sampled companies. The study further reveals that respondents suffered consequences such as restlessness, anxiety and nervous indigestion, headache, neck ache, and inability to concentrate. This study however has implication for management of foreign-owned manufacturing organization. Based on this, appropriate recommendations were made application of which will help to ensure enabling workplace environment and thus reduce the effects of stress on employees.

  14. The Effects of Property, Plant and Equipment (TAS 16 Standard on Cost of Sales of Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    İlker KIYMETLİ ŞEN

    2013-06-01

    Full Text Available According to the Turkish Commercial Code that came into force in July 2012, the all capital companies that meet the criteria described by the Council of Ministers are required to be in compliance with accounting and financial reporting standards published by the Public Oversight, Accounting and Auditing Board. There are several differences between the local accounting regulations and the standards in terms of valuation, computation and presentation. These differences also affect the cost of sales of the companies that result in differences in the calculation of costs of goods manufactured. The purpose of this study is to examine and demonstrate the potential effects of the TAS 16 Property, Plant and Equipment on calculations of manufacturing costs and the cost of sales of manufacturing companies.

  15. Financial planning and access to financing in small and mediumsized companies in the Venezuelan manufacturing sector

    Directory of Open Access Journals (Sweden)

    Mary A. Vera-Colina

    2011-12-01

    Full Text Available The relationship between the presence of financial planning and difficulties regarding access to financing in small and medium-sized companies (SMEs in the Venezuelan manufacturing sector is studied. This is an explicative type research work, designed as non-experimental, crosssectional and correlational field work, applied to a sample of 67 SMEs. A questionnaire was applied and a review was made of the relevant literature, to establish the characteristics of the selected variables, according to the high-medium-low measurement for each of the selected indicators. The preliminary results make it possible to affirm that the financial planning variable demonstrates a medium presence in the companies, with medium and low levels of coordination among their components. Average access to financing is classified as low, marked by a medium-high access to credit from suppliers, medium access in reinvestment of profits and medium-low access to bank credit lines. There is also evidence of financing patterns compatible with the Pecking Order Theory. The conclusion is that there is a weak relationship between the characteristics of financial planning and the levels of access to financing, with the inference that the behavior of these variables is determined by a multiplicity of factors.

  16. Characterization and Conditions of the Internationalization Process of Companies in the Plastic Products Manufacturing Subsector in Bogota

    Directory of Open Access Journals (Sweden)

    Jackson Paul Pereira Silva

    2016-04-01

    Full Text Available This paper proposes a qualitative research by conducting surveys in 30 companies from the plastic products manufacturing subsector, based on theories of internationalization. It aims to find the main determinants of internationalization of these companies, while characterizing and analyzing evidence by contrasting practice and theory, in order to explain how the dynamics in the sector and its current state are and to propose recommendations for greater competitiveness and efficiency in foreign trade.

  17. The Key Factors of Selecting Electronics Manufacturing Service Suppliers – an Example of Company U in Taiwan

    Directory of Open Access Journals (Sweden)

    Chiu Hui-Feng

    2015-12-01

    Full Text Available In a highly competitive environment with a developed network, the customers of electronics manufacturing service (EMS manufacturers always seek a wide range of choices. EMS manufacturers can attract loyal customers and establish long-term partnerships if they understand and satisfy their customers’ needs to execute a response plan successfully with limited resources. If these conditions are met, EMS manufacturers can create high customer equity. This study investigates how the demand of downstream enterprises can be satisfied on the basis of the opinion of upstream suppliers in the electronics manufacturing industry. Domestic and foreign literature related to the dimensions and elements of supplier evaluation criteria were investigated to extract 22 elements of supplier selection by corporate customers. Five supplier evaluation dimensions were then established through interviews with the internal experts of the case company. An analytic hierarchy process-based (AHP-based approach is used to design the questionnaire for the external corporate customers of the case company. The questionnaire is then used to investigate the supplier evaluation criteria of the customers of EMS manufacturers. Conclusions and suggestions are provided on the basis of the results to provide the case company with references that can be used to develop and maintain customer relationship and create high customer equity.

  18. Activity-based Management of Logistic Costs in a Manufacturing Company: A Case of Increased Visibility of Logistics Costs in a Slovenian Paper Manufacturing Company

    OpenAIRE

    Julijana Krajnc; Klavdij Logožar; Bojana Korošec

    2012-01-01

    Both the transparent reporting of logistics costs and the related accounting of their cost drivers present a significant factor for the successful management of material flows and the related logistics activities in production companies. These costs, which are mainly reported as part of overhead (indirect) costs in such companies, usually remain hidden or are not explicitly visible when the traditional method of accounting is applied. The aim of this research is to create a model of activity-...

  19. Patterns of order processing : a study of the formalization of the ordering process in order-driven manufacturing companies

    NARCIS (Netherlands)

    Welker, Geertruida Annigje

    2004-01-01

    It is essential for many order-driven manufacturing companies to be able to respond quickly to changing customer demand. In this respect, the ordering process plays a central role, as coordination between demand and production takes places within this process. The ordering process must contribute to

  20. Six-sigma application in tire-manufacturing company: a case study

    Science.gov (United States)

    Gupta, Vikash; Jain, Rahul; Meena, M. L.; Dangayach, G. S.

    2017-09-01

    Globalization, advancement of technologies, and increment in the demand of the customer change the way of doing business in the companies. To overcome these barriers, the six-sigma define-measure-analyze-improve-control (DMAIC) method is most popular and useful. This method helps to trim down the wastes and generating the potential ways of improvement in the process as well as service industries. In the current research, the DMAIC method was used for decreasing the process variations of bead splice causing wastage of material. This six-sigma DMAIC research was initiated by problem identification through voice of customer in the define step. The subsequent step constitutes of gathering the specification data of existing tire bead. This step was followed by the analysis and improvement steps, where the six-sigma quality tools such as cause-effect diagram, statistical process control, and substantial analysis of existing system were implemented for root cause identification and reduction in process variation. The process control charts were used for systematic observation and control the process. Utilizing DMAIC methodology, the standard deviation was decreased from 2.17 to 1.69. The process capability index (C p) value was enhanced from 1.65 to 2.95 and the process performance capability index (C pk) value was enhanced from 0.94 to 2.66. A DMAIC methodology was established that can play a key role for reducing defects in the tire-manufacturing process in India.

  1. Strategic IS Planning Practices: A Case of Medium Manufacturing Company in Malaysia

    Directory of Open Access Journals (Sweden)

    Raja Mohd. Ali Raja Haslinda

    2017-01-01

    Full Text Available Deployment of Information Technology/Information Systems (IT/IS has been recognized as one of the potential means to supply information for timely business decision making. Despite growing importance of IT/IS in business, Small Medium Enterprises (SMEs embrace constant challenges to deploy IS effectively, and thus, hardly to optimize the IT/IS strategic values. In such situation, IS planning is getting paramount to promote more effective IT/IS management of the firms. This study reports IS planning practices of a manufacturing-based SME. The face to face interview has been carried out to explore IS planning activities in a chosen firm. The qualitative analysis suggests that the selected company did undergo the four phases of strategic IS planning process namely, planning, analysing, selection, and implementation. The owner act as the champion of the strategic IS planning process. Further, the owner and the employees plays an important role as a decision maker. Specifically, the owner decides mainly on acquiring a new technology related to the firm’s core business process whereas the users responsible on the selection of relevant application (s to be used in their respective departments. Apart from that, the owner also plays a role as a researcher for the new technology acquired whilst the users provide an input on the applications to be acquired.

  2. Assessment of musculoskeletal disorders in a manufacturing company using QEC and LUBAmethods and comparison of results

    Directory of Open Access Journals (Sweden)

    B. Afsartala

    2010-04-01

    Full Text Available Background and aims   Musculoskeletal disorders (MSDs are the most important causes of workers disabilities, increasing compensations and reducing productivity in developed and developing countries. This study was aimed to determine prevalence of musculoskeletal disorders and assessment of them by using QEC and LUBA methods and comparison of results in a manufacturing company in Iran.     Methods   This descriptive-analytical study was performed on 115 operators in 15 working stations by using QEC and LUBA methods. The prevalence of MSDs was obtained by using Nordic Musculoskeletal Questionnaire (NMQ. The data were analyzed by Spearman correlation coefficients.     Results   According to findings of NMQ, 81.4 percent of operators at least in one of nine parts of musculoskeletal system have pain since 12 months ago. Assessment with QEC and LUBA  revealed that 71.3 and 24.35 percent of operators respectively are in action level four.     Conclusion   According to the analysis, correlation between findings of NMQ and action levels in QEC is higher than LUBA action levels. Whereas LUBA just assess working postures, this method is not a suitable tool for evaluation of working stations that require repetitive carrying of loads, static posture and long time to do.  

  3. AHP approach for supplier evaluation and selection in a steel manufacturing company

    Directory of Open Access Journals (Sweden)

    Farzad Tahriri

    2008-12-01

    Full Text Available Supplier selection is one of the most critical activities of purchasing management in supply chain. Supplier selection is a complex problem involving qualitative and quantitative multi-criteria. A trade-off between these tangible and intangible factors is essential in selecting the best supplier. The work incorporates AHP in choosing the best suppliers. The results suggest that AHP process makes it possible to introduce the optimum order quantities among the selected suppliers so that the Total Value of Purchasing (TVP becomes maximum. In this work, an AHP-based supplier selection model is formulated and then applied to a real case study for a steel manufacturing company in Malaysia. The use of the proposed model indicates that it can be applied to improve and assist decision making to resolve the supplier selection problem in choosing the optimal supplier combination. The work represents the systematic identification of the important criteria for supplier selection process. In addition, the results exhibit the application of development of a multi-criteria decision model for evaluation and selection of suppliers with proposed AHP model, which by scoring the performance of suppliers is able to reduce the time taken to select a vendor.

  4. Using Innovative Methodologies From Technology and Manufacturing Companies to Reduce Heart Failure Readmissions.

    Science.gov (United States)

    Johnson, Amber E; Winner, Laura; Simmons, Tanya; Eid, Shaker M; Hody, Robert; Sampedro, Angel; Augustine, Sharon; Sylvester, Carol; Parakh, Kapil

    2016-05-01

    Heart failure (HF) patients have high 30-day readmission rates with high costs and poor quality of life. This study investigated the impact of a framework blending Lean Sigma, design thinking, and Lean Startup on 30-day all-cause readmissions among HF patients. This was a prospective study in an academic hospital in Baltimore, Maryland. Thirty-day all-cause readmission was assessed using the hospital's electronic medical record. The baseline readmission rate for HF was 28.4% in 2010 with 690 discharges. The framework was developed and interventions implemented in the second half of 2011. The impact of the interventions was evaluated through 2012. The rate declined to 18.9% among 703 discharges (P < .01). There was no significant change for non-HF readmissions. This study concluded that methodologies from technology and manufacturing companies can reduce 30-day readmissions in HF, demonstrating the potential of this innovations framework to improve chronic disease care. © The Author(s) 2014.

  5. Evaluation of workers' exposure to methylene diphenyl diisocyanate (MDI) in an automobile manufacturing company, Iran.

    Science.gov (United States)

    Kakooei, Hossein; Shahtaheri, Seyed Jamaleddin; Karbasi, Hossein-Ali

    2006-01-01

    Evaluation of personal inhalation exposure to methylene diphenyl diisocyanate (MDI) among 39 employees, working in the window fixation and window glue processes in an automobile manufacturing company was performed. This study was conducted for both case and control groups. After sampling and sample preparation processes, MDI was determined with a UV-VIS spectrophotometer at 590 nm; the lung function was assessed with a digital spirometer, too. The average concentration of MDI in the window fixation, and window glue workplaces were 34.53 and 27.37 micro g/m3, respectively, which was lower than the threshold limit value (TLV) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) (51 micro g/m3). Respiratory symptoms in the exposed group were significantly different compared to the unexposed group (p < .05). Lung capacities in the case group were lower than in the control group (p < .05). Therefore, MDI can be easily measured making it possible to evaluate the adverse effects caused by occupational exposure.

  6. Activity-based Management of Logistic Costs in a Manufacturing Company: A Case of Increased Visibility of Logistics Costs in a Slovenian Paper Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Julijana Krajnc

    2012-01-01

    Full Text Available Both the transparent reporting of logistics costs and the related accounting of their cost drivers present a significant factor for the successful management of material flows and the related logistics activities in production companies. These costs, which are mainly reported as part of overhead (indirect costs in such companies, usually remain hidden or are not explicitly visible when the traditional method of accounting is applied. The aim of this research is to create a model of activity-based accounting of logistics costs in a production company, and to test its efficiency in the disclosure of logistics costs compared with traditional cost accounting. The application of the model in a production company shows that an activity-based approach discloses as much as 108% more logistics costs at the level of a group of products than the traditional cost-accounting approach. Further, detailed information on logistics costs obtained in this way enables their more efficient management. Key words: logistics costs; activity-based costing; cost allocation; cost visibility; cost management

  7. The Effect Of The Use Of Mobile Technologies By Management In Polish Manufacturing Enterprises On The Efficiency Of Knowledge Transfer Within A Company

    Directory of Open Access Journals (Sweden)

    Patalas-Maliszewska Justyna

    2015-06-01

    Full Text Available This article elaborates an existence of a positive effect of the use of mobile technologies by managers, according to their competences, on the efficiency of explicit knowledge transfer in a manufacturing company. It focuses on the set of the competences of managers, who use the mobile technologies in manufacturing companies and is based on a survey and data obtained from 119 Polish manufacturing enterprises. This article develops a framework of how managers can determinate the knowledge transfer in a manufacturing company and further discusses the research results.

  8. IMPLEMENTATION OF LEAN MANUFACTURING IN FISH CANNING COMPANY: A CASE STUDY OF A CANNED SARDINES PRODUCTION COMPANY IN MOROCCO

    OpenAIRE

    I. Idrıssi; A. Mesfioui; I. Aftais; B. Benazzouz

    2015-01-01

    Lean is a powerful tool, which can bring significant benefit to manufacturing industries by creating value through reduction of waste. Although the lean concept has become very popular in mass production industries such as the automotive industry, more recently the concept has been adopted in different batch processing industries and service sectors. The application of lean tools into the food processing industry has not received the same level of attention compared...

  9. SOUTH AFRICA – A SUB-SAHARAN MANUFACTURING PARADISE? : A STUDY ON SWEDISH-RELATED MANUFACTURING COMPANIES

    OpenAIRE

    Nordén, Erik; Laine, Markus

    2008-01-01

    BACKGROUND: The general comprehension of the populace is that the continent of Africa is very deprived. However, South Africa, the economic powerhouse in the Southern African region, has a stock exchange that rates amid the twenty largest in the world. With a well-developed infrastructure as well as democratic political system, the area has become increasingly more unwavering for companies disposed to invest. Reasons are cheap labour and availability of natural resources where South Africa ha...

  10. A Model of a Tacit Knowledge Transformation for the Service Department in a Manufacturing Company: A Case Study

    Directory of Open Access Journals (Sweden)

    Dudek Adam

    2016-01-01

    Full Text Available This article elaborates on the development of a dedicated model of a tacit knowledge transformation for the service department in a manufacturing company. The four main components of the tacit knowledge transformation process are formulated: (1 tacit knowledge source identification, (2 tacit knowledge acquisition, (3 tacit knowledge determination and formalization, and (4 knowledge classification. The proposed model is illustrated by examples on the use of the methods: automatic recognition of speech, natural language processing, and automatic object recognition in the tacit knowledge transformation process in order to obtain a formalized procedure for the service department in a manufacturing company. This is followed by a discussion of the results of the research experiments.

  11. ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

    Directory of Open Access Journals (Sweden)

    Nafees Ahmed Memon

    2011-04-01

    Full Text Available Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The construction companies of developing countries have reaped many advantages from the effective implementation of ISO standards. The rate of adoption of ISO standards has remained slow in the construction sector of some developing countries like Pakistan. This paper presents the literature review of ISO in global construction industry. It highlights the advantages, disadvantages and barriers faced by construction companies in the implementation of ISO standards. This study also investigates the level of adoption of ISO standards in construction and manufacturing companies of Pakistan through a questionnaire survey. It presents the comparison of ISO standards\\\\\\' adoption in both construction and manufacturing sectors. The paper puts forward some suggestions and recommendation for the better adoption and improvement of ISO implementation in the construction sector of Pakistan. This study emphasizes that construction companies of Pakistan should learn from the benefits reaped by the construction companies of developed countries and take appropriate measures for implementing ISO standards. It also suggests that public sector clients should make it obligatory for the contractors and consultants to have ISO certification before awarding the works in order to enhance the the adoption of ISO standards in construction sector.

  12. Firm and Auditor Characteristics, and Audit Report Lag in Manufacturing Companies Listed on Indonesia Stock Exchange during 2008-2012

    Directory of Open Access Journals (Sweden)

    Mukhtaruddin

    2015-03-01

    Full Text Available One of the qualitative characteristics of financial reporting is relevant. Its manifestation can be seen from the timeliness of reporting. Timeliness could be judged from the audit report lag, which is the length of time from the end of company’s fiscal year to the date of auditor's report. This research aims to empirically examine the influence of firm size, operation complexity, auditor quality, and auditor's opinion on audit report lag of manufacturing companies listed in Indonesia Stock Exchange. The population of this research consists of manufacturing companies, listed on Indonesia Stock Exchange from 2008 to 2012 as many as 111 companies with the research’s sample of 65 companies or 325 observational data, which were selected by purposive sampling method. The data are secondary data obtained from Indonesia Stock Exchange. The research proves that simultaneously, all variables significantly influence the audit report lag. Subsequently in partial, variables ‘firm size’, ‘auditor's opinion’ have a significant and positive effect on audit report lag, the ‘auditor quality’ has a significant and negative effect on audit report lag, while the variable ‘operation complexity’ has no significant effect on audit report lag. The coefficient of determination ?(R?^2 in this study was 0.192 or 19.2 % and the remaining 80.8 % is influenced by other factors that were not examined.

  13. Life cycle costs measurement of complex systems manufactured by an engineer-to-order company

    NARCIS (Netherlands)

    Öner, K.B.; Franssen, R.; Kiesmüller, G.P.; Houtum, van G.J.J.A.N.; Qui, R.G.; Russell, D.W.; Sullivan, W.G.

    2007-01-01

    Complex technical systems such as packaging lines, computer networks, material handling systems, are crucial for the operations at the companies (or institutions) where they are installed. Companies require high availability because their primary processes may halt when these systems are down. High

  14. Using 3 × 3 Matrix to Evaluate the Manufacturing Technology in Food Company

    Directory of Open Access Journals (Sweden)

    Ingaldi Manuela

    2016-06-01

    Full Text Available In order to produce goods of sufficient quality finding buyers in the market, a company must have an adequate knowledge of their production technology. Technologies and finished products at the same time will affect the position of the company in the market and hence its existence in this market. Therefore, it is so important for every company to determine the appropriate technological strategy. The 3 × 3 matrix is a very useful tool to do so. This matrix shows the relation between technological possibilities of the company and its position in the market. However, that requires changing the scale used in the matrix. In practice, this means that both those that have a positive impact on the company and those that have a negative impact on it can be included in the factors. The research was conducted in a food industry company. It turned out that the research company was located in field of the matrix marked as ‚Improve marketing’. It means that the company should put more emphasis on improving the factors related to its position in the market.

  15. Mid-sized manufacturing companies the new driver of Italian competitiveness

    CERN Document Server

    Resciniti, Riccardo; Tunisini, Annalisa; Varaldo, Riccardo

    2013-01-01

    The structure of Italian industry is characterized by a predominance of small sized companies and the presence of very few large companies. For a long time a conviction was shared among scholars and practitioners that the strength and safety of Italian industry were based on its industrial districts, that is, the system of interdependent and co-localized small companies which derive their competitive force from an effective and efficient division of labour. This book stresses the idea that a new, vital and promising phenomenon for the competitiveness of Italian industry is focused on mid-sized companies, and the systems of interconnected firms that form a constituent part of their business model. These companies, which originate largely from districts and other local production systems, are a strong entrepreneurial force complementing the districts that have characterized Italy and made Italian industry famous worldwide. A quantitative and qualitative analysis of these firms is provided in this book. Business...

  16. Self-managing teams in manufacturing companies: implications for the engineering function

    NARCIS (Netherlands)

    Leede, de Jan; Stoker, Janka

    Reports on an explanatory multiple case-study of companies with self-managing teams. Reasons for introducing self-managing teams; Cooperation between self-managing teams and engineering development; Conclusion.

  17. Fenestrated endovascular aortic aneurysm repair using physician-modified endovascular grafts versus company-manufactured devices.

    Science.gov (United States)

    Dossabhoy, Shernaz S; Simons, Jessica P; Flahive, Julie M; Aiello, Francesco A; Sheth, Parth; Arous, Edward J; Messina, Louis M; Schanzer, Andres

    2017-12-07

    Fenestrated endografts are customized, patient-specific endovascular devices with potential to reduce morbidity and mortality of complex aortic aneurysm repair. With approval from the U.S. Food and Drug Administration, our center began performing fenestrated endovascular aneurysm repair through a physician-sponsored investigational device exemption (IDE #G130210), using both physician-modified endografts (PMEGs) and company-manufactured devices (CMDs). Because these techniques are associated with specific advantages and disadvantages, we sought to investigate differences in outcomes between PMEG and CMD cases. A single-institution retrospective review of all fenestrated endovascular aneurysm repairs was performed. The cohort was analyzed by device type (PMEG or CMD) after matching of cases on the basis of (1) number of target vessels intended for treatment, (2) extent of aneurysm, (3) aneurysm diameter, (4) device configuration, and (5) date of operation. Outcomes of ruptures, common iliac artery aneurysms, and aortic arch aneurysms were excluded. Demographics, operative details, perioperative complications, length of stay, and reinterventions were compared. For patients with >1 year of follow-up time, survival, type I or type III endoleak rate, target artery patency, and reintervention rate were estimated using the Kaplan-Meier method. Between November 30, 2010, and July 30, 2016, 82 patients were identified and matched. The cohort included 41 PMEG and 41 CMD patients who underwent repair of 38 juxtarenal (PMEG, 17; CMD, 21; P = .38), 14 pararenal (PMEG, 6; CMD, 8; P = .56), and 30 thoracoabdominal type I to type IV (PMEG, 18; CMD, 12; P = .17) aneurysms. There were significant differences in presentation requiring urgent aneurysm repair (PMEG, 9; CMD, 0; P = .002), total fluoroscopy time (PMEG, 76 minutes; CMD, 61 minutes; P = .02), volume of contrast material used (PMEG, 88 mL; CMD, 70 mL; P = .02), in-operating room to out-of-operating room time

  18. Evaluating the competitive intelligence effort in a manufacturing company / Sidney Farrell

    OpenAIRE

    Farrell, Sidney

    2007-01-01

    In order for organisations to remain competitive, supportive tools for decision-making are required. In an industry of information overload, the emphasis is not on more information but on actionable intelligence, capable of guiding decisions in a company. Specific areas are considered fundamental for the success of actionable competitive intelligence. The most important facet is the support and involvement of top management and the participation of the entire company. Fur...

  19. Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

    Energy Technology Data Exchange (ETDEWEB)

    2010-08-01

    This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  20. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-07-01

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  1. GCP 1.0: A Tool for Cost Management in Micro and Small Textile Manufacturing Companies in Bucaramanga

    Directory of Open Access Journals (Sweden)

    Ofelia Gómez Niño

    2015-11-01

    Full Text Available This article presents the results of a diagnostic study in which 52 textile manufacturing companies were observed in Bucaramanga to characterize the needs of these productive units. Based on the results, three strategic options were formulated to improve performance: a To consolidate the productive system by tools that facilitate production processes, b to strengthen cost structure by designing systems and tools; and c to share technological initiatives, knowledge and experience to improve resource management. From this perspective, the second phase of the research was oriented to develop the software GCP 1.0 for micro and small companies of children’s confection in Bucaramanga, a production cost information system that would facilitate cost management and the fixation of sale prices.

  2. Characteristic and Competency Measurement Instrument Development for Maintenance Staff of Mechanical Expertise with SECI Method: A Case of Manufacturing Company

    Science.gov (United States)

    Mahatmavidya, P. A.; Soesanto, R. P.; Kurniawati, A.; Andrawina, L.

    2018-03-01

    Human resource is an important factor for a company to gain competitiveness, therefore competencies of each individual in a company is a basic characteristic that is taken into account. The increasing employee’s competency will affect directly to the company's performance. The purpose of this research is to improve the quality of human resources of maintenance staff in manufacturing company by designing competency measurement instrument that aims to assess the competency of employees. The focus of this research is the mechanical expertise of maintenance staff. SECI method is used in this research for managing knowledge that is held by senior employees regarding employee competence of mechanical expertise. The SECI method converts the knowledge of a person's tacit knowledge into an explicit knowledge so that the knowledge can be used by others. The knowledge that is gathered from SECI method is converted into a list of competence and break down into the detailed competency. Based on the results of this research, it is known that 11 general competencies, 17 distinctive competencies, 20 indicators, and 20 item list for assessing the competencies are developed. From the result of competency breakdown, the five-level instrument of measurement is designed which can assist in assessing employee’s competency for mechanical expertise.

  3. Influence of Components of Net Working Capital on Costs of Companies Manufacturing Machinery and Equipment in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Zdeněk Motlíček

    2015-01-01

    Full Text Available The approach to working capital management significantly affects the performance of companies. Nevertheless, this effect varies depending on the observed industry and company’s size and it may be assumed that it is also dependent on territory differences. The paper presents an empirical research aiming to identify particular links between net working capital and costs of the company. The outcomes indicate a relatively strong positive correlation between the variables, especially in case of inventory. Furthermore he ratio of financial costs to ordinary costs is low, as well as the impact of net working capital components on financial costs. It follows that a focus on collection period would not lead to significant savings. The findings appropriately complement Czech and foreign literature focused more on impact of net working capital or working capital on profitability indicators. Further studies concerning a more detailed analysis of the influence of net working capital on corporate costs are difficult to be found. The present research has been conducted on medium-sized companies located in the Czech Republic and manufacturing machinery and equipment. The obtained results suggest the most suitable area of focus for optimization of working capital in relation to costs for the types of companies defined above.

  4. Manufacturing strategy in the auto parts industry: a multicases study in companies at sorocaba’s region

    Directory of Open Access Journals (Sweden)

    Márcia Regina Neves Guimarães

    2014-05-01

    Full Text Available The alignment of manufacturing strategy with the business strategy is fundamental for achieving sustainable competitive advantage. In the particular case of the automotive industry, it is verified that the production strategy of suppliers is strongly influenced by the strategy of automakers. In this context, this paper aims at presenting characteristics of the content of the production strategy of four auto parts companies besides analyzing the influence of automakers in the definition of the strategy contents.This is a descriptive and exploratory research that uses  a qualitative approach and the multi-case study method. Among the main results, it was found that the prevalent competitive priority in the companies is quality followed by delivery. In the decision areas, it was noted that customers have great influence on the quality management of these companies and in the R&D activities, besides demanding frequent deliveries. Finally, it was found that auto parts companies seek to strengthen their competitive priorities by adopting criteria from suppliers  for selecting and evaluating.

  5. An assessment of the moderating role of employees’ cultural orientations amongst foreign manufacturing multinational companies in Kenya

    Directory of Open Access Journals (Sweden)

    Beatrice A. Dimba

    2013-09-01

    Research purpose: Specifically, this study sought to investigate the extent to which employee cultural orientations moderate the link between SHRM practices and firm performance in large foreign manufacturing multinational companies in Kenya. Motivation for the study: Large foreign multinational companies have generally applied SHRM practices without adaptation when trying to improve employee performance even though resource based perspectives argue for the consideration of employees’ cultural orientations. Research design, approach and method: SHRM practices were conceptualised as independent variables measured through distinct practices. Organisational performance as a dependent variable was measured using constructs of image, interpersonal relations, and product quality. Cultural dimensions adopted for this study were power distance, uncertainty avoidance, individualism or collectivism, and masculinity or femininity. The above conceptual framework was tested by the use of both quantitative and qualitative techniques with data from fifty (50 large foreign multinational companies operating in Kenya. Main findings: Findings indicated that the relationship between SHRM practices and firm performance depend to a greater extent on employee cultural orientations when power distance is considered. Power distance (PD refers to the extent of people accepting that power in institutions and organisations when distributed unequally. The greater the PD, the greater the acceptance of this inequality. Practical/managerial implications: The study supported the notion that the relationship between SHRM practices and firm performance is moderated by power distance through motivation but not by the other three bipolar dimensions namely, Uncertainty Avoidance, Masculinity or Femininity and Individualism or Collectivism. Contribution/value-add: This is the first large-scale empirical article that has focused on the moderating role of employees’ cultural orientations in large

  6. MANAGING SMEs IN A TURBULENT CONTEXT: A CASE STUDY FROM A KOSOVAN MANUFACTURING COMPANY

    Directory of Open Access Journals (Sweden)

    Liridon Veliu

    2018-03-01

    Full Text Available The purpose of this paper is to present the influence of the management to the SMEs in the markets facing problems of economy consolidation. This paper seeks to explore how a particular manufacturing SME in Kosovo organizes its processes on the daily basis and the challenges that currently faces in a fragile competition. This research embraces a qualitative single case study methodology in the context of manufacturing SMEs. The data collection comprises fourteen interviews. We also conducted observation within the organization supplemented by analysing different documents in order to have triangulation that could increase validity and reliability. This study helps theorists to emphasize more upon the criticality of manufacturing SMEs in building a strong case for future frameworks in order to demystify the overwhelming ideas that only managerial levels should be involved in the research domain for the case analysis especially in the manufacturing industry. Particularly in Kosovo where SMEs in the manufacturing sector are still struggling to recover and create a solid infrastructure for growth where the need for a broader integration in the analysis is indispensable in understanding the challenges and future alternatives of this sector. We intend helping managers, employees and wider practitioners to understand the importance of mutual task responsibilities; developing an integrated cooperation process; emphasizing the criticality of avoiding the orthodox approach of a managerial leading style, and transforming it into a new orthopraxy of ensuring that an internal employee involvement and participation is the key to articulating the necessary efforts of organizational success.

  7. Service procurement in manufacturing companies: results of three embedded case studies

    NARCIS (Netherlands)

    Valk, van der W.

    2008-01-01

    An increasing part of companies' purchasing expenditures is being spent on (business) services. At the same time, the interactive character of business services has so far largely been neglected in purchasing and supply management studies. The success of a service purchase is however established

  8. Applying Value Stream Mapping Technique for Production Improvement in a Manufacturing Company: A Case Study

    Science.gov (United States)

    Jeyaraj, K. L.; Muralidharan, C.; Mahalingam, R.; Deshmukh, S. G.

    2013-01-01

    The purpose of this paper is to explain how value stream mapping (VSM) is helpful in lean implementation and to develop the road map to tackle improvement areas to bridge the gap between the existing state and the proposed state of a manufacturing firm. Through this case study, the existing stage of manufacturing is mapped with the help of VSM process symbols and the biggest improvement areas like excessive TAKT time, production, and lead time are identified. Some modifications in current state map are suggested and with these modifications future state map is prepared. Further TAKT time is calculated to set the pace of production processes. This paper compares the current state and future state of a manufacturing firm and witnessed 20 % reduction in TAKT time, 22.5 % reduction in processing time, 4.8 % reduction in lead time, 20 % improvement in production, 9 % improvement in machine utilization, 7 % improvement in man power utilization, objective improvement in workers skill level, and no change in the product and semi finished product inventory level. The findings are limited due to the focused nature of the case study. This case study shows that VSM is a powerful tool for lean implementation and allows the industry to understand and continuously improve towards lean manufacturing.

  9. Comparisons of Performance and Job Insecurity in Union and Nonunion Sites of a Manufacturing Company

    Science.gov (United States)

    Filipkowski, Monica; Johnson, C. Merle

    2008-01-01

    Layoffs and employment changes caused by current economic conditions have significant effects on employee work behavior and emotions as well as organizational outcomes. We examined the relationships between measures of job insecurity, organizational commitment, turnover, absenteeism, and worker performance within a manufacturer in Chapter 11…

  10. 75 FR 49538 - Modine Manufacturing Company; Pemberville, OH; Notice of Revised Determination on Reconsideration

    Science.gov (United States)

    2010-08-13

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,291] Modine Manufacturing..., 2010 a petitioner requested administrative reconsideration of the Department's negative determination... of this revised certification, and all workers in the group threatened with total or partial...

  11. QUALITY IMPROVEMENT USING STATISTICAL PROCESS CONTROL TOOLS IN GLASS BOTTLES MANUFACTURING COMPANY

    Directory of Open Access Journals (Sweden)

    Yonatan Mengesha Awaj

    2013-03-01

    Full Text Available In order to survive in a competitive market, improving quality and productivity of product or process is a must for any company. This study is about to apply the statistical process control (SPC tools in the production processing line and on final product in order to reduce defects by identifying where the highest waste is occur at and to give suggestion for improvement. The approach used in this study is direct observation, thorough examination of production process lines, brain storming session, fishbone diagram, and information has been collected from potential customers and company's workers through interview and questionnaire, Pareto chart/analysis and control chart (p-chart was constructed. It has been found that the company has many problems; specifically there is high rejection or waste in the production processing line. The highest waste occurs in melting process line which causes loss due to trickle and in the forming process line which causes loss due to defective product rejection. The vital few problems were identified, it was found that the blisters, double seam, stone, pressure failure and overweight are the vital few problems. The principal aim of the study is to create awareness to quality team how to use SPC tools in the problem analysis, especially to train quality team on how to held an effective brainstorming session, and exploit these data in cause-and-effect diagram construction, Pareto analysis and control chart construction. The major causes of non-conformities and root causes of the quality problems were specified, and possible remedies were proposed. Although the company has many constraints to implement all suggestion for improvement within short period of time, the company recognized that the suggestion will provide significant productivity improvement in the long run.

  12. Validating continuous digital light processing (cDLP) additive manufacturing accuracy and tissue engineering utility of a dye-initiator package.

    Science.gov (United States)

    Wallace, Jonathan; Wang, Martha O; Thompson, Paul; Busso, Mallory; Belle, Vaijayantee; Mammoser, Nicole; Kim, Kyobum; Fisher, John P; Siblani, Ali; Xu, Yueshuo; Welter, Jean F; Lennon, Donald P; Sun, Jiayang; Caplan, Arnold I; Dean, David

    2014-03-01

    This study tested the accuracy of tissue engineering scaffold rendering via the continuous digital light processing (cDLP) light-based additive manufacturing technology. High accuracy (i.e., <50 µm) allows the designed performance of features relevant to three scale spaces: cell-scaffold, scaffold-tissue, and tissue-organ interactions. The biodegradable polymer poly (propylene fumarate) was used to render highly accurate scaffolds through the use of a dye-initiator package, TiO2 and bis (2,4,6-trimethylbenzoyl)phenylphosphine oxide. This dye-initiator package facilitates high accuracy in the Z dimension. Linear, round, and right-angle features were measured to gauge accuracy. Most features showed accuracies between 5.4-15% of the design. However, one feature, an 800 µm diameter circular pore, exhibited a 35.7% average reduction of patency. Light scattered in the x, y directions by the dye may have reduced this feature's accuracy. Our new fine-grained understanding of accuracy could be used to make further improvements by including corrections in the scaffold design software. Successful cell attachment occurred with both canine and human mesenchymal stem cells (MSCs). Highly accurate cDLP scaffold rendering is critical to the design of scaffolds that both guide bone regeneration and that fully resorb. Scaffold resorption must occur for regenerated bone to be remodeled and, thereby, achieve optimal strength.

  13. Validating continuous digital light processing (cDLP) additive manufacturing accuracy and tissue engineering utility of a dye-initiator package

    International Nuclear Information System (INIS)

    Wallace, Jonathan; Wang, Martha O; Kim, Kyobum

    2014-01-01

    This study tested the accuracy of tissue engineering scaffold rendering via the continuous digital light processing (cDLP) light-based additive manufacturing technology. High accuracy (i.e., <50 µm) allows the designed performance of features relevant to three scale spaces: cell-scaffold, scaffold-tissue, and tissue-organ interactions. The biodegradable polymer poly (propylene fumarate) was used to render highly accurate scaffolds through the use of a dye-initiator package, TiO 2  and bis (2,4,6-trimethylbenzoyl)phenylphosphine oxide. This dye-initiator package facilitates high accuracy in the Z dimension. Linear, round, and right-angle features were measured to gauge accuracy. Most features showed accuracies between 5.4–15% of the design. However, one feature, an 800 µm diameter circular pore, exhibited a 35.7% average reduction of patency. Light scattered in the x, y directions by the dye may have reduced this feature's accuracy. Our new fine-grained understanding of accuracy could be used to make further improvements by including corrections in the scaffold design software. Successful cell attachment occurred with both canine and human mesenchymal stem cells (MSCs). Highly accurate cDLP scaffold rendering is critical to the design of scaffolds that both guide bone regeneration and that fully resorb. Scaffold resorption must occur for regenerated bone to be remodeled and, thereby, achieve optimal strength. (paper)

  14. How loan interest rate liberalization affects firms'loan maturity structure Evidence from listed manufacturing companies in China

    Institute of Scientific and Technical Information of China (English)

    Jianfang Zhou; Jingjing Wang; Jianping Ding

    2014-01-01

    Purpose-After loan interest rate upper limit deregulation in October 2004,the financing environment in China changed dramatically,and the banks were eligible for risk compensation.The purpose of this paper is to focus on the influence of the loan interest rate librealization on firms' loan maturity structure.Design/methodology/approach-Based on Rajan's (1992) model the authors constructed a tradeoff model of how the banks choose long-term and short-term loans scales,and further analyzed banks' loan term decisions under the loan interest rate upper limit deregulation or collateral cases.Then the authors used an unbalanced panel data set of 586 Chinese listed manufacturing companies and 9,376 observations during the period 1996-2011 to testify the theoretical conclusion.Furthermore,the authors studied the effect on firms with different characteristics of ownership or scale.Findings-The results show that the loan interest rate liberalization significantly decreases the private companies' reliance on short-term loans and increases sensitivity to interest rates of stateowned companies' long-term loans.But the results also show that the companies' ownership still plays a key role on the long-term loans availability.When monetary policy tightened,small companies still have to borrow short-term loans for long-term purposes.As the bank industry is still dominated by state-owned banks and the deposit interest rate has upper limits,the effect of the loan interest rate liberalization on easing long-term credit constraints is limited.Originality/value-From a new perspective,the content and findings of this paper contribute to the study of the effect of the interest rate liberalization on China economy.

  15. Night-shift work and risk of compromised visual acuity among the workers in an electronics manufacturing company.

    Science.gov (United States)

    Lin, Yu-Cheng; Ho, Kuo-Jung

    2018-01-01

    To evaluate the association between night-shift work exposure and visual health, this cross-sectional study utilized visual acuity, a surrogate measure for visual function, as a parameter, and performed an analysis comparing visual acuity between daytime and nighttime employees in an electronics manufacturing company. Data of personal histories, occupational records, physical examinations and blood tests was obtained from the electronic health records of workers. The total of 8280 workers including 3098 women and 5182 men, wearing their own daily used eyeglasses, were included in the final analysis. The mean age of the sample population was 34.7 years old (standard deviation = 5.4 years). All workers were divided into 3 work categories - consistent daytime worker (CDW), day-shift worker (DSW) and night-shift worker (NSW). The check-up results of glasses-corrected visual acuity (c-VA) were utilized to classify individuals as good (≥ 1.2, both eyes) and inadequate (electronics manufacturing company. Int J Occup Med Environ Health 2018;31(1):71-79. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  16. Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company

    Science.gov (United States)

    Yahya, N. M.; Zahid, M. N. O.

    2018-03-01

    This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.

  17. An approach to industrial water conservation--a case study involving two large manufacturing companies based in Australia.

    Science.gov (United States)

    Agana, Bernard A; Reeve, Darrell; Orbell, John D

    2013-01-15

    This study presents the application of an integrated water management strategy at two large Australian manufacturing companies that are contrasting in terms of their respective products. The integrated strategy, consisting of water audit, pinch analysis and membrane process application, was deployed in series to systematically identify water conservation opportunities. Initially, a water audit was deployed to completely characterize all water streams found at each production site. This led to the development of a water balance diagram which, together with water test results, served as a basis for subsequent enquiry. After the water audit, commercially available water pinch software was utilized to identify possible water reuse opportunities, some of which were subsequently implemented on site. Finally, utilizing a laboratory-scale test rig, membrane processes such as UF, NF and RO were evaluated for their suitability to treat the various wastewater streams. The membranes tested generally showed good contaminant rejection rates, slow flux decline rates, low energy usage and were well suited for treatment of specific wastewater streams. The synergy between the various components of this strategy has the potential to reduce substantial amounts of Citywater consumption and wastewater discharge across a diverse range of large manufacturing companies. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  18. Staff perceptions of organisational values in a large South African manufacturing company: exploring socio-demographic differences

    Directory of Open Access Journals (Sweden)

    Nico Martins

    2011-11-01

    Research purpose: The objective of the study was to explore the perceptions of men and women staff members, as well as members of various race and age groups, in a large South African manufacturing company about the current enactment of organisational values and the importance of these values. Motivation for the study: The challenge of managing multi-cultural work forces from different gender, race and generational backgrounds makes an understanding of how peoples’ values align with those of their organisations, as reflected in their cultures, necessary. Research design, approach and method: Using an organisational values scale, the researchers conducted a quantitative survey on a random sample of 988 participants employed in a large South African manufacturing company. Main findings: ANOVAs and post hoc multiple comparison of means tests revealed that gender, race and age have a significant effect on some of the dimensions of organisational values and that these biographical groups differ significantly in their perceptions of the importance of certain organisational values as well as how their organisations enact them. Practical/mangerial implications: The findings highlight the importance of understanding staff perceptions in creating greater commitment to organisational values as important aspects of an effective organisational culture. Contribution/value-add: This study is original research that contributes new knowledge to the field of organisational psychology and management practices.

  19. Operating Cash Flow, Earning Response Coefficient, and Fixed Asset Revaluation: Study on Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Andison Andison

    2017-03-01

    Full Text Available The purpose of this study to determine the effect of operating cash flow to the abnormal return and the effect of operating cash flow to the abnormal return of companies that conduct the revaluation is higher than that of non revaluation which adopted SFAS No. 16 (2012. The analysis used in this study are multiple regression, for the period 2012-2015. The results showed that operating cash flow has no effect on non-sampled companies revaluation, while the sample of firms that perform revaluation proves that operating cash flow has a positive and significant impact on the abnormal return. Moreover, the effect of revaluation policy can strengthen the influence between operating cash flow to the firm abnormal return than non revaluation.DOI: 10.15408/etk.v16i1.4820

  20. Supply Chian Risk Management in China -- A cae study of two manufacturing companies in China

    OpenAIRE

    Sui, Zhiyu

    2013-01-01

    In the currently business world, companies face high competitive pressures from trends of global outsourcing, varieties of product types, shorter products life cycle. This result in increasing complexity of supply chain network and a high level of supply chain risks. In addition, supply chain risk management become vital and can be used to mitigate supply chain risks. There are many previous research focused on supply chain risk management in developed countries, but not many take depth resea...

  1. THE INFLUENCE OF EARNING MANAGEMENT TO FIRM VALUE IN INDONESIA MANUFACTURING COMPANIES

    OpenAIRE

    Mitha FILANDARI; Susy SUHENDRA

    2018-01-01

    Firm value is one of the indicators in determining whether the company is in health state and deservesto invest in it. This makes the manager to act appropriately by performing earnings management practicesto increase the firm value but with the implementation of GCG it is expected to reduce the earningsmanagement practices. This study aimed to examine the effect of GCG mechanisms (independentcommissioner, managerial ownership, institutional ownership, and audit quality) as moderating variabl...

  2. Impact of TQM practices on innnovation performance among manufacturing companies in Malaysia

    Directory of Open Access Journals (Sweden)

    Choi Sang Long

    2015-05-01

    Full Text Available This study examines the impact of total quality management (TQM practices on an organisation’s innovation performance. Correlation coefficient and regression analysis is used to examine the relationship between TQM practices and innovation performance. This study’s sample is drawn from the manufacturing organisations located in the district of Rawang in the state of Selangor, Malaysia. The empirical results of this study confirm that TQM has a positive impact on innovation performance across five measured practices: customer focus, leadership, process management, strategic planning, and people management. Furthermore, the three most influential TQM practices are identfied as people management,process management, and customer focus. Managers in the manufacturing sector can find this study useful, especially if they are aiming to improve their organisation’s innovation performance with the help of quality management practices.

  3. An investigation of safety attitude in a number of manufacturing companies in Urmia

    Directory of Open Access Journals (Sweden)

    Abolfazl Ghahramani

    2016-12-01

    Result: The results indicated that majority of participants (78.9 % had a moderate safety attitude level and the mean (±SD score of total safety attitude was 3.19 (±0.25. “Commitment to safety and participation in safety activities” and “safety talk and risk information communication” obtained the highest and lowest scores of safety attitude factors, with mean (SD of 3.97(±0.52 and 2.53(±0.58, respectively. In addition, the participants from private companies showed a better safety attitude than those of governmental companies (P-value<0.05. Managers and workers, who had previously received safety training, reported a different attitude toward various factors of safety attitude, in comparison with untrained groups. Conclusion: Since the majority of participants had a moderate safety attitude, this research suggests the study companies to attempt in order to increase the quantity and quality of safety training courses, as well as safety communication of managers and supervisors with workers for improving their attitude toward safety and subsequently decreasing occupational accidents.

  4. The Effect of Information Technology on Value Chain of Iranian Exemplary Exporter Manufacturer Companies

    OpenAIRE

    Mahmood Naderi Bani; Mohammad Ali Feyzpoor; Ali Sanayei

    2013-01-01

    The fast and ever-increasing progress in Information Technology (IT) area and their role inhelping firms to improve their performance cause them to depend on IT day by day. At thesame time, few studies have been conducted in this area, so the mechanism and effects of ITon Iranian firm’s value chains are unclear. Therefore, it is necessary to study in this area. Thisstudy is a descriptive survey. The statistical population of the research is composed of Iranianexemplary exporter manufacturer c...

  5. PROCESS PERFORMANCE EVALUATION USING HISTOGRAM AND TAGUCHI TECHNIQUE IN LOCK MANUFACTURING COMPANY

    Directory of Open Access Journals (Sweden)

    Hagos Berhane

    2013-12-01

    Full Text Available Process capability analysis is a vital part of an overall quality improvement program. It is a technique that has application in many segments of the product cycle, including product and process design, vendor sourcing, production or manufacturing planning, and manufacturing. Frequently, a process capability study involves observing a quality characteristic of the product. Since this information usually pertains to the product rather than the process, this analysis should strictly speaking be called a product analysis study. A true process capability study in this context would involve collecting data that relates to process parameters so that remedial actions can be identified on a timely basis. The present study attempts to analyze performance of drilling, pressing, and reaming operations carried out for the manufacturing of two major lock components viz. handle and lever plate, at Gaurav International, Aligarh (India. The data collected for depth of hole on handle, central hole diameter, and key hole diameter are used to construct histogram. Next, the information available in frequency distribution table, the process mean, process capability from calculations and specification limits provided by the manufacturing concern are used with Taguchi technique. The data obtained from histogram and Taguchi technique combined are used to evaluate the performance of the manufacturing process. Results of this study indicated that the performance of all the processes used to produce depth of hole on handle, key hole diameter, and central hole diameter are potentially incapable as the process capability indices are found to be 0.54, 0.54 and 0.76 respectively. The number of nonconforming parts expressed in terms of parts per million (ppm that have fallen out of the specification limits are found to be 140000, 26666.66, and 146666.66 for depth of hole on handle, central hole diameter, and key hole diameter respectively. As a result, the total loss incurred

  6. A Longitudinal BPR Study in a Danish Manufacturing Company - From Reengineering to Process Management

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Wieth, Christian; Domsten, Zenia Vittarp

    1998-01-01

    , Business Process Reengineering (BPR) is the most applied method for planning and carrying out projects. Novo Nordisk A/S is one of the largest companies in Denmark and the world's largest producer of industrial enzymes with a market share of more than 50%.This paper is a longitudinal study of BPR...... initiatives at Enzyme Business carried out within the time frame of January 1994 to March 1998. The paper provides empirical insight from a number of BPR-projects and related BPR-initiatives, e.g. Business System Reengineering projects. The results of the paper suggest that reengineering with the means...

  7. THE INFLUENCE OF EARNING MANAGEMENT TO FIRM VALUE IN INDONESIA MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    Mitha FILANDARI

    2018-02-01

    Full Text Available Firm value is one of the indicators in determining whether the company is in health state and deservesto invest in it. This makes the manager to act appropriately by performing earnings management practicesto increase the firm value but with the implementation of GCG it is expected to reduce the earningsmanagement practices. This study aimed to examine the effect of GCG mechanisms (independentcommissioner, managerial ownership, institutional ownership, and audit quality as moderating variablesin the relationship between earnings management and firm value. The object in this study is a manufacturingcompany listed in Indonesia Stock Exchange period in 2010-2014. This study uses purposive samplingmethod so that 31 companies were obtained as study sample. Data used in this study are secondary whichare financial statement and annual report. Data analysis in this study uses multiple linear regressionanalysis and Moderated Regression Analysis with SPSS 21. The results show that GCG mechanisms whichcan be moderating variable between earnings management and firm value are independent commissionerand audit qualities whereas managerial ownership and institutional ownership cannot moderate therelationship between earnings management and firm value.

  8. Dimensions of organizational learning: contextual variables in companies under lean manufacturing implementation

    Directory of Open Access Journals (Sweden)

    Guilherme Luz Tortorella

    2014-08-01

    Full Text Available The Lean Production (LP is an approach that encompasses a variety of management practices to reduce losses and improve operational efficiency. Due to this fact, the ability to innovate, change and learn continuously presents itself as a key element in the implementation of the LP. Several contextual variables were mentioned in the literature as potential impediments to implementing lean. However, little is known about the influence of these variables on the dimensions of Organizational Learning (OL. This study aims to examine the relationship between six contextual variables and the frequency of occurrence of problems in companies that are implementing the LP. Furthermore, the identification of relevant relationships between dimensions of OL and contextual variables contribute to the identification of the contexts in which problems can be expected to occur. The sample contains thirteen companies implementing the LP. The results indicate that the same contextual variables, which are deemed as influential to implement LP, have a different influence on the ability of organizational learning.

  9. Technology change priorities influencing competition quality promotion: Case study of Iran Keaton Polyester Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Pouria Nour

    2012-10-01

    Full Text Available In the changing world with various customers’ demands the businesses tend to improve their advantages to beat their rivals by means of better quality, lower prices and so. For Iranian polyester market quality is of crucial importance and is achieved through changing and updating technologies. According to highly regarded model of CAPTECH, which is recommended by UNIDO, technology parameters are defined in each phase and not generally as a whole. In the end the biggest gaps are defined. The main goal is to prioritize the main parameters affecting Iranian polyester company's quality. In order to fulfill our goal, 20 high and medium managers were questioned for this paper. The questions were gathered according to UNIDO samples. After a qualitative and quantitative test we concluded that the biggest gap is for supply chain(56.91 and the lowest gap is for combination phase(43.97.

  10. INTELLECTUAL CAPITAL REPORTING AND DISCLOSURE IN THE ANNUAL REPORTS OF ROMANIAN MANUFACTURING LISTED COMPANIES" THEORETICAL FRAMEWORK

    Directory of Open Access Journals (Sweden)

    Farcas Mariana

    2011-07-01

    Full Text Available One of the most researched topic regarding financial reporting and disclosure of today is the way intellectual capital or knowledge assets contributes to the improving of the quality of information disclosed and create or add value to business performance. Also, it is acknowledged that a company has access to a variety of tools for disclosing information on intellectual capital. In our study we have decided to investigate the concept, the measurement models and the intellectual capital disclosure practices using as the source of our documentation books, articles, working papers and online publications. So, in the first part of our research we have presented several points of view in respect to the concept of knowledge assets or intellectual capital and in the second part we have reviewed the literature on the topic highlightening several scholars opinion on reporting and disclosure issues.

  11. Shift work and hypertension: Prevalence and analysis of disease pathways in a German car manufacturing company.

    Science.gov (United States)

    Ohlander, Johan; Keskin, Mekail-Cem; Stork, Joachim; Radon, Katja

    2015-05-01

    Hypertension and cardiovascular disease (CVD) may share a similar pathophysiology. Despite shift workers' CVD excess risk, studies on shift work and hypertension are inconclusive. Blood pressure and shift status for 25,343 autoworkers were obtained from medical check-ups and company registers. Cross-sectional associations modeling the total effect from shift work (day shifts, shift work without nights, rotating shift work with nights, and night shifts) on hypertension were assessed. By sequential adjustments, the influence of behavioral, psychosocial, and physiological factors on the total effect was examined, with subsequent mediation and moderation analyses. Adjusted for confounders, shift work without nights (vs. day shifts) was significantly associated with hypertension (OR 1.15, 95%CI 1.02-1.30). The total effect was mediated by BMI, physical inactivity, and sleep disorders. No moderation of the total effect by behaviors was found. The association between shift work and hypertension seems mainly attributable to behavioral mechanisms. © 2015 Wiley Periodicals, Inc.

  12. Coevolution of Interorganizational Psychological Contract and Interorganizational Relationship: A Case Study of Manufacturing Company in China

    Directory of Open Access Journals (Sweden)

    Wei He

    2017-01-01

    Full Text Available As the belief of the beholder in an exchange about the obligations that another party should have, interorganizational psychological contract (IPC from a micro perspective provides a new angle to study interorganizational relationship (IOR. This paper studies the interrelation and coevolution of IORs and IPCs by building a system dynamics (SD model. Firstly based on the structural analysis of the interrelations of IPC and IOR, this paper builds the qualitative causal loop diagram of the interrelations. Based on investigation of 55 manufacturing enterprises in China we further draw the stock and flow diagram. Then we apply the data of Jiangxi Motors Co., Ltd., to simulate the model. The results reveal the development and evolution of IORs and IPCs and their interrelations. Furthermore, the sensitivity analysis is conducted and the influences of trust on IORs and IPCs are discussed. Finally managerial implications and some recommendations are provided for the decision-making of developing IORs.

  13. Ergonomic assessment for the task of repairing computers in a manufacturing company: A case study.

    Science.gov (United States)

    Maldonado-Macías, Aidé; Realyvásquez, Arturo; Hernández, Juan Luis; García-Alcaraz, Jorge

    2015-01-01

    Manufacturing industry workers who repair computers may be exposed to ergonomic risk factors. This project analyzes the tasks involved in the computer repair process to (1) find the risk level for musculoskeletal disorders (MSDs) and (2) propose ergonomic interventions to address any ergonomic issues. Work procedures and main body postures were video recorded and analyzed using task analysis, the Rapid Entire Body Assessment (REBA) postural method, and biomechanical analysis. High risk for MSDs was found on every subtask using REBA. Although biomechanical analysis found an acceptable mass center displacement during tasks, a hazardous level of compression on the lower back during computer's transportation was detected. This assessment found ergonomic risks mainly in the trunk, arm/forearm, and legs; the neck and hand/wrist were also compromised. Opportunities for ergonomic analyses and interventions in the design and execution of computer repair tasks are discussed.

  14. Results of the independent radiological verification survey at the former Associate Aircraft Tool and Manufacturing Company site, Fairfield, Ohio (FOH001)

    International Nuclear Information System (INIS)

    Rice, D.E.; Murray, M.E.; Brown, K.S.

    1996-01-01

    The former Associate Aircraft Tool and Manufacturing Company site is located at 3550 Dixie Highway, Fairfield, Ohio. Associate Aircraft Tool and Manufacturing Company produced hollow uranium slugs in a machine shop at the site in 1956. The work was performed for National Lead of Ohio in a contract with the Atomic Energy Commission to augment the capacity of the Feed Materials Production Center at Fernald in the development of nuclear energy for defense-related projects. The current occupant of the building, Force Control, operates a multipurpose machine shop. At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted an independent radiological verification survey at the former Associate Aircraft Tool and Manufacturing Company Site, Fairfield, Ohio. The survey was performed from February to May of 1995. The purpose of the survey was to verify that radioactivity from residues of 238 U was remediated to a level below acceptable DOE guidelines levels

  15. The Effect of Cash Dividend, Retained Earnings, and Stock Price of Manufacturing Company Listed In Indonesia Stock Exchange

    Directory of Open Access Journals (Sweden)

    Farah Margaretha

    2015-03-01

    Full Text Available This study aims to determine the effect of cash dividends per share, retained earnings per share, earnings per share, and leverage on the stock price of manufacture industry in Indonesia from 2008-2012. Research used secondary data in which the source was obtained indirectly through an intermediary medium or data processed from literatures and reports associated with this research. Independent variables in this study (x are cash dividends per share, retained earnings per share, earnings per share, and leverage, while the dependent variable (y is stock price. The samples used were 23 companies with purposive sampling method. The empirical results of this study indicate that cash dividends per share, retained earnings per share, earnings per share, and leverage has significant effect on the stock price. It is therefore the higher stock price will attract investors to invest their money. Hence, companies and investors need to attend cash dividends per share, retained earnings per share, earnings per share, and leverage as factors that affect the increase or decrease of the stock price. 

  16. Cost-Benefit Analysis and Assessment of Ergonomic Interventions Effects: Case Study Boiler and Equipment Engineering and Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Iraj Mohammad faam

    2015-12-01

    Full Text Available Background & Objectives: In Economic and competitive world today,cost-benefit analysis is one of the most important parameters for any intervention.The purpose of thisstudy was cost-benefit analysis of ergonomic interventions effects in Boiler and Equipment Engineering and Manufacturing Company. Methods:At first all workstations of the company assessed using QEC. Thenthose earned more than 70% in QEC assessed by OWAS. By analyzing the results of these two methods, the “Haarp welding” workstation selected as the critical one. After presentation of possible solutions in specialized committee, the final solution selected and cost-benefit analysis done by CyberManS tool. Finally after implementing the intervention workstation reassessed. Findings:The results of the survey showed that the final score of assessment using QEC, OWAS and NASA-TLX before the intervention was 84.7%, 3 and 75.4, respectively and after the intervention was 47.5%, 1 and 42.7 that witnesses a significant reduction in all three methods of assessment. Also the result of cost-benefit analysis by CyberManS showed that by spending 110 million rials after 1.5 years the investment returned and profitability initiated. Conclusion:In addition to reducing the risk of musculoskeletal disorders, ergonomic interventions have financial benefits by increasing the productivity and production, reducing the compensation and the lost work days can also cause financial benefits.

  17. Working capital management and its impact on profitability:A study listed manufacturing companies in Sri Lanka

    Directory of Open Access Journals (Sweden)

    Balasundaram Nimalathasan

    2010-12-01

    Full Text Available Main purpose of the study is to identify the impact of working capital management on profitability of selected listed manufacturing companies from financial year 2003-2007. Correlation and regression analysis were performed. Results reveals that cash conversion cycle (CCC and return on assets (ROA are negatively correlated the value of -0.127 which is highly significant at 1 percent level of significance, which means that as the cash conversion cycle increases ROA decreases. In addition inventory conversion period (ICP is highly significant at 1 percent level. It indicates that with increasing level of ICP, ROA will be increased -0.065 levels. Further the coefficient of the CCC variable is negative at a value of -0.0503 and p value is 0.006. This implies that an increase in the number of day’s cash conversion cycle by 1 day is associated with a decline in ROA by 5.03%. The results suggest that managers can increase profitability of manufacturing firms by reducing the number of day’s inventories and accounts receivable

  18. The Role of Business Sustainability in Human Resource Management: A Study on Indian Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Vasantha Lakshmi R

    2017-05-01

    Full Text Available Business sustainability from the point of view of human resource management (HRM is a management and leadership philosophy about how people are most enable to contribute to success at their work by minimizing the negative impactof their work on the environmental and social factors and at the same timeimproving the financial factors in the organizations. This study is an empiricalstudy conducted on 233 Indian manufacturing firms operating in the Karnatakaregion to investigate the role for HRM in business sustainability. The role for HRMin business sustainability is studied with the construct HRM strategic integrationin business sustainability strategy. Further, this study focuses on the way HRMincorporates sustainability in its practices in the organization and its impact onthe organizational performance. The data are analyzed using SEM, and the resultsrevealed the significance of the relationship of the HRM strategic integration ofsustainability strategy with the organizational performance. The organizationalperformance studied with respect to the three factors of business sustainability viz.,profit, people, and planet. Further, these relationships are tested with contingencyfactors, age of the firm, and the number of employees for its significance in thisrelation. The empirical evidence of the study shows a significant positive relationof organizational performance when HRM has strategic integration in businesssustainability strategy. Model I4C is derived to show the role for HRM in business sustainability. 

  19. Value stream mapping and simulation for implementation of lean manufacturing practices in a footwear company

    Directory of Open Access Journals (Sweden)

    Danilo Felipe Silva de Lima

    2016-03-01

    Full Text Available The development of the Value Stream Mapping (VSM is generally the first step for implementation of Lean Manufacturing (LM. The aim of this paper is to present an application of VSM with simulation in order to analyze the impacts of the LM adoption in the performance of a footwear plant. Therefore, a VSM was designed for the current state and, through the implementation of lean elements, a future state could be designed. Different scenarios were simulated for the future state implementation and the results were compared each other. Transfer, cutting and assembly sections were chosen to be simulated, because it was considered that would be possible to establish a one-piece flow between those processes. After the simulation, the scenario that presented the best results provided a 19% productivity increase over the current state, as well as improvement in all other process variables. The application of simulation as an additional element of VSM has helped to identify the advantages of the joint approach, since it enables to test different alternatives and better define the future state and its implementation strategies.

  20. Analysis of manual material handling activity to increase work productivity (Case study: manufacturing company

    Directory of Open Access Journals (Sweden)

    Suryoputro Muhammad Ragil

    2018-01-01

    Full Text Available Manual material handling is one of work activities that have an effect on the physical aspect of workers in manufacturing industry, it is necessary to do the analysis of the risks from such activities. Analysis was performed on worker when performing manual lifting activity and when using two tools (Automatic Handlift and Manual Handlift. In addition to analyse in ergonomics aspect, time study analysis and productivity measurement were carried out to determine the effects of the equipment. Nordic Body Map (NBM questionnaire on worker using Automatic Handlift showed declining level of musculoskeletal disorders by 22%. REBA method obtained score of 10 and was declined to 4 after using these tool. The results of MPL method showed declining of Fc value from 4756.37 N to 1346.56 N. The results of RWL method showed declining of LI value (Lifting Index origin and destination from 1.84 and 1.18 to 1.12 and 0.89 respectively. As for worker using Manual Handlift, NBM questionnaire result shows declining level of musculoskeletal disorders by 57%. REBA method obtained scores of 8 and was reduced to 5. For MPL methode result, the Fc value is 4906.99 N and reduced to 2047.88 N. RWL method results showed declining of LI value (Lifting Index origin and destination from 1.02 and 0.67 to 0.74 and 0.58. The results of time study analysis showed declining of Standard Time when use the two tools and make the increasing productivity of 9% by worker using Automatic Hadlift and 4% by worker using Manual Handlift.

  1. The role of quality function deployment in meeting customers’ requirements: A case study on the Egyptian tire manufacturing company

    Directory of Open Access Journals (Sweden)

    El Mehelmi Heba

    2017-03-01

    Full Text Available The purpose of this study is to explore the use of QFD within the Egyptian public sector. Thus, there is a need to examine the role of QFD as an improvement approach within the Egyptian public sector organizations. Where QFD had consistently been claimed in the Western world and Europe. This study aimed to extend the knowledge of choosing an appropriate TQM tool for the Egyptian PSOs. Where it serves as an extension to previous studies carried out in the Western world but within the Egyptian context. This study is based on two sources of data collection, semi structured interviews from customers which were analyzed using content analysis and focus groups with managers to construct the QFD model. A purposive sample targeting the company's customers and managers were selected who had the requisite information. Semi-structured interviews helped to identify the factors affecting customers' purchase preferences, customers' opinions, perception, requirements, and problems. Moreover, it served the purpose to identify the 'WHATs' that are an essential part of the proposed QFD framework. Two focus group sessions were conducted to construct the QFD model. The findings of the study indicate that QFD is a generic framework that is appropriate and feasible for application within the public sector tire manufacturing company in Egypt. It was quite a good scientific exercise to demonstrate how customers' requirements were identified, the technical specifications needed and finally constructing the QFD framework to meet customers' requirements. The current study is a single case study which might limit the ability to generalize the research findings, although it identified powerful context and specific insights into QFD implementation. Yet, generalization of findings could be applied to other public sector companies in Egypt facing almost the same problems and having the same surrounding context and environment. Another limitation of this study is the sample

  2. Benzidine-based dyes: effects of industrial practices, regulations, and world trade on the biological stains market.

    Science.gov (United States)

    Dapson, R W

    2009-06-01

    One of the most sweeping changes in the dye industry since the advent of synthetic dyes grew out of the health risks associated with benzidine. Dyes made from benzidine and its derivatives were used around the world until adverse health effects become incontrovertible. Workers and family members of workers involved in production and use of benzidine-based dyes had a high incidence of bladder cancer. Following publication of several reports documenting this health hazard, dye makers in the USA, Europe, and Japan phased these dyes out of production in the 1970s. Government regulations lent legal support for these voluntary initiatives. Two strategies subsequently evolved to compensate: developed nations brought alternative substances to market while emerging countries increased production of carcinogenic dyes and sold them at discount prices around the world. Nearly all dye manufacturing now has moved away from nations whose costs of production and compliance rendered them unable to compete. The purpose of this brief review is to publicize the health risks associated with dyes made from benzidine and its congeners, and to alert all companies and end users handling these dyes for biomedical applications that composition of the product and lot-to-lot variability may be problematic because of the manufacturing and distribution practices of the countries where they are produced.

  3. Results of the radiological survey at the former Associate Aircraft Tool and Manufacturing Company site, Fairfield, Ohio (FOH001)

    International Nuclear Information System (INIS)

    Murray, M.E.; Carrier, R.F.; Mathis, R.A.

    1993-03-01

    At the request of the US Department of Energy (DOE), a team from oak Ridge National Laboratory conducted a radiological survey of the former Associate Aircraft Tool and Manufacturing Company facility, Fairfield, Ohio. The survey was performed in July and September 1992. The purpose of the survey was to determine if the facility had become contaminated with residuals containing radioactive materials during the work performed under government contract from February to September, 1956. The survey included gamma scanning over a circumscribed area around and outside of the building, and gamma scanning over most accessible indoor floor surfaces as well as the collection of soil and other samples for radionuclide analyses. Roof trusses were beta-gamma scanned in locations where floor contamination was found. Results of the survey demonstrated radionuclide concentrations in indoor and outdoor samples, and radiation measurements over floor and overhead surfaces, in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines. Elevated uranium concentrations outdoors were limited to several small, isolated spots. Radiation measurements exceeded guidelines indoors over numerous spots and areas inside the building, mainly in the areas that had been used in the early government work

  4. An improvement of agricultural equipment manufacturing by using lean techniques : A case study of agricultural machinery company

    Directory of Open Access Journals (Sweden)

    Nattariya Pakdeepunya

    2015-06-01

    Full Text Available The objective of this research was to study and improve the manufacturing process of agricultural equipment to reduce wastes by using the LEAN tools: a case study of agricultural machinery company. This study found that the main wastes were inefficiency of transportation and working process. The Systematic Layout Planning Pattern (SLP had been applied. Moreover, the principles of ECRS, the change in input factors (a number of employees, together with simulation and the Analysis Hierarchy Process (AHP were also used to determine the appropriate plant layout alternatives by considering the factors such as the productivity, materials handling distance, facilities utilization, and space utilization. The result shared that the best suitable layout is the layout No. 1. Then more improvement the layout No. 1 with the ECRS and the change of input factors (the amount of employees ,it was found that increased productivity by 16.10%, increased facilities utilization by 15.73% and decreased materials handling distance by 48.12%. Furthermore, the number of employees and the average time of workpiece in system could be reduced from 7 to 6 persons, and 54.41 minutes to 45.65 minutes respectively.

  5. Evaluation of the musculoskeletal disorders by ART technique and implementation of ergonomics intervention programs in a manufacturing company

    Directory of Open Access Journals (Sweden)

    javad torkaman

    2015-06-01

    Full Text Available Background & Objectives : Currently, work-related musculoskeletal disorders are a major occupational health concern. This study tried to evaluate the risk factors of musculoskeletal disorders by the assessment of repetitive tasks (ART. It also sought to determine the effects of an ergonomic intervention on the mentioned risk in a manufacturing company . Methods: In this study, 60 production line workers were randomly selected. The data was collected by using a demographic questionnaire and the ART. The intervention was implemented for 39 cases. Data were analyzed in SPSS. Results: The initial evaluations suggested low, moderate, and high levels of risk in 21.7, 48.3, and 30.0 of the participants, respectively. Re-assessments after the intervention showed that the frequency of low-risk individuals increased from 30.70 before the intervention to 53.85 after the intervention. On the other hand, comparisons between the rates before and after the intervention revealed reductions in the frequency of moderate risk (64.10 vs. 43.59 and high risk (5.2 vs. 2.56. These changes were all significant. Conclusion: In most cases, the initial ergonomic risks were not at an acceptable level. In fact, most workers were at moderate level of risk. Since many workers in the assembling industry suffer from musculoskeletal disorders, low-cost eengineering and management measures can be taken to reduce the level of risk .

  6. Taxation Pressure, Capital Squeeze and Wage Share: A Study Based on the Data of China's Manufacturing Listed Companies

    Institute of Scientific and Technical Information of China (English)

    ZHONG Chunping; CHEN Liang; XUE Cuiying

    2017-01-01

    From the micro-level,this paper measures the proportion of labor income and tries to reveal the deep-lying causes,the interest distribution mechanism behind and the intemal logic for the lower proportion of labor income from the institutional aspect.By making use of the data of China's manufacturing listed companies,it measures the changing trend of wage share paid by enterprises and conducts a quantitative test on the factors affecting the wage share.The results show that,on the average,taxation accounts for 41.0% as the highest,labor wage accounts for 32.8%,and capital share accounts for 26.2%;the share of capital is rising,indicating that laborers are generally in a disadvantageous position.The analysis reveals that the wage share is affected by such factors as the interest gaining capacity of both of the labor and the management,the business taxes to the government and the capital costs payment level.When the labor side lacks sufficient protection,enterprises would shift the excessive taxation and capital pressure to the laborers,leading to the decrease of wage share.The internal causes are that the government levies taxes on the enterprises,in turn the enterprises squeeze the wages of the laborers;because the laborers are short of enough ability to protect their interests,finally their wage and the wage share are always low and declining.

  7. Results of the radiological survey at the former Chapman Valve Manufacturing Company, Indian Orchard, Massachusetts (CIO001)

    International Nuclear Information System (INIS)

    Foley, R.D.; Uziel, M.S.

    1992-07-01

    Radiological survey was conducted at Building 23 (Department No. 40) at the former Chapman Valve Manufacturing Company, Indian Orchard, Massachusetts. The survey was performed in August 1991. The purpose of the survey was to determine whether the property was contaminated with radioactive residues, principally 238 U, as a result of work done for the Atomic Energy Commission (AEC) during the 1940s. The survey included a gamma scan, a beta-gamma scan, and measurement of alpha activity; measurement of direct and removable alpha and beta-gamma levels; and the collection of soil, dust, debris, and smear samples for radionuclide analyses. Survey emphasis was on interior floors, walls, and overhead beams. Radionuclide analysis of soil, dust, and debris, and analysis of smear samples indicate that residual 238 U attributable to former AEC-supported operations is present at this site. Elevated levels of radioactivity were particularly evident on the floors and walls in the western part of the central area of the building (grid blocks Al through A6). Concentrations of 238 U in dust samples collected from overhead beams exceeded DOE guidelines in grid blocks Al through A14 and remained elevated in grid blocks A15 through A19. Dust on a movable overhead crane in grid block A23 was well above the guideline, probably because the crane had at some time been located further west. Some contamination was evident in grid blocks B1 through B5, but clutter and debris in this area prevented a thorough survey

  8. Fabrication of Polymeric Antireflection Film Manufactured by Anodic Aluminum Oxide Template on Dye-Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Jenn-Kai Tsai

    2017-03-01

    Full Text Available In this study, high energy conversion efficient dye-sensitized solar cells (DSSCs were successfully fabricated by attaching a double anti-reflection (AR layer, which is composed of a subwavelength moth-eye structured polymethyl methacrylate (PMMA film and a polydimethylsiloxane (PDMS film. An efficiency of up to 6.79% was achieved. The moth-eye structured PMMA film was fabricated by using an anodic aluminum oxide (AAO template which is simple, low-cost and scalable. The nano-pattern of the AAO template was precisely reproduced onto the PMMA film. The photoanode was composed of Titanium dioxide (TiO2 nanoparticles (NPs with a diameter of 25 nm deposited on the fluorine-doped tin oxide (FTO glass substrate and the sensitizer N3. The double AR layer was proved to effectively improve the short-circuit current density (JSC and conversion efficiency from 14.77 to 15.79 mA/cm2 and from 6.26% to 6.79%, respectively.

  9. Direct thermal dyes

    Science.gov (United States)

    Ehlinger, Edward

    1990-07-01

    Direct thermal dyes are members of a class of compounds referred to in the imaging industry as color formers or leuco dyes. The oldest members of that class have simple triarylmethane structures, and have been employed for years in various dyeing applications. More complex triarylmethane compounds, such as phthalides and fluorans, are now used in various imaging systems to produce color. Color is derived from all of these compounds via the same mechanism, on a molecular level. That is, an event of activation produces a highly resonating cationic system whose interaction with incident light produces reflected light of a specific color. The activation event in the case of a direct thermal system is the creation of a melt on the paper involving dye and an acidic developer. The three major performance parameters in a thermal system are background color, image density, and image stability. The three major dye physical parameters affecting thermal performance are chemical constituency, purity, and particle size. Those dyes having the best combination of characteristics which can also be manufactured economically dominate the marketplace. Manufacturing high performance dyes for the thermal market involves multi-step, convergent reaction sequences performed on large scale. Intermediates must be manufactured at the right time, and at the right quality to be useful.

  10. The impact of an employee wellness programme in clothing/textile manufacturing companies: a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Edries Naila

    2013-01-01

    Full Text Available Abstract Background The prevalence of health risk behaviours is growing amongst South African employees. Health risk behaviours have been identified as a major contributor to reduced health related quality of life (HRQoL and the increased prevalence of non-communicable diseases. Worksite wellness programmes promise to promote behaviour changes amongst employees and to improve their HRQoL. The aim of this study was to evaluate the short-term effects of an employee wellness programme on HRQoL, health behaviour change, body mass index (BMI and absenteeism amongst clothing and textile manufacturing employees. Methods The study used a randomised control trial design. The sample consisted of 80 subjects from three clothing manufacturing companies in Cape Town, South Africa. The experimental group was subjected to a wellness programme based on the principles of cognitive behaviour therapy (CBT as well as weekly supervised exercise classes over six weeks. The control group received a once-off health promotion talk and various educational pamphlets, with no further intervention. Measurements were recorded at baseline and at six weeks post-intervention. Outcome measures included the EQ-5D, Stanford Exercise Behaviours Scale, body mass index and absenteeism. Data was analysed with the Statistica-8 software program. Non-parametric tests were used to evaluate the differences in the medians between the two groups and to determine the level of significance. The Sign test was used to determine the within group changes. The Mann–Whitney U test was used to determine the difference between the two groups. Results At six weeks post intervention the experimental group (39 subjects demonstrated improvement in almost every parameter. In contrast, apart from an overall decrease in time off work and a reduction in BMI for all study participants, there was no significant change noted in the behaviour of the control group (41 subjects. Seventy percent of the

  11. EFFECT OF INTELLECTUAL CAPITAL, CAPITAL STRUCTURE AND MANAGERIAL OWNERSHIP TOWARD FIRM VALUE OF MANUFACTURING SECTOR COMPANIES LISTED IN INDONESIA STOCK EXCHANGE (IDX PERIOD 2010-2014

    Directory of Open Access Journals (Sweden)

    Hamidah Hamidah

    2015-09-01

    Full Text Available The purpose of this study is to know the effect of Intellectual Capital, Capital Structure and Managerial Ownership on Firm Value in Manufacturing Company Listed on Indonesia Stock Exchange in 2010-2014. In this research, intellectual capital can be seen from VACA (Value Added Capital Employed, VAHU (Value Added Human Capital, and STVA (Structural Capital Value Added. The research model in this study employs panel data analysis. The samples are manufacturing companies listed in Indonesian Stock Exchange in 2010-2014 selected by purposive sampling. The result show that VACA and STVA has negative and not significant effect on firm value (Tobins’Q. Whereas, VAHU have positive and not significant effect on firm value. Capital structure (DAR have positive and significant effect on firm value. Managerial ownership (MGRL have negative and significant effect on firm value.

  12. Comparison of outcomes in a case of bilateral cochlear implantation using devices manufactured by two different implant companies (Cochlear Corporation and Med-El).

    Science.gov (United States)

    Withers, S J; Gibson, W P; Greenberg, S L; Bray, M

    2011-05-01

    This paper reports a case of a patient who has had bilateral cochlear implants that have been manufactured by different cochlear implant companies (Cochlear Corporation and Med-El). Comparison of speech perception tests following single implant insertion and bilateral insertion (3 and 12 months). The patient was also interviewed to obtain a subjective opinion on their quality of hearing. The patient reported that their Med-El implant had better sound quality than their Cochlear Corporation implant. The speech perception tests however failed to show any difference. Despite no difference found with the objective tests hearing is very subjective and therefore the patient's opinion on the quality of sound is important. It is only a matter of time before other patients are fitted with bilateral cochlear implants from different companies and this information should be collated to allow comparison between manufacturers.

  13. Computational simulation and lean thinking as tools of process management: an assessment of different alternatives to increase capacity in a manufacturing company of aluminum electrical cables

    Directory of Open Access Journals (Sweden)

    Tiago Augusto Amarante de Souza

    2014-12-01

    Full Text Available In this study, the production chain of a manufacturing company of aluminum electrical conductors is analyzed, in order to select the best strategy for increasing its production capacity. The company´s production systems and flows are highly complex and have high variability in their production flows. A quantitative modeling methodology was proposed to simulate those systems, and to analyze them in a simpler manner. The simulation model considered two different strategies related to production increase: “Lean Thinking” and Machinery/Equipment Purchase. From the current context and the results obtained from the simulation study, it was possible to conclude that the best scenario for increasing production capacity for the company was using the Lean Thinking strategy on the critical processes.The gains in capacity are higher and the implementing costs involved are lower than the ones observed in the other strategy considered.

  14. Manufacturing of Zirconium products at Chepetsky Mechanical Plant, Stock Company. Prospects of development and products quality assurance

    International Nuclear Information System (INIS)

    Vergazov, K.; Shtuza, M.; Lozitsky, S.; Kutyavin, A.

    2015-01-01

    The report described all the steps required to fabricate zirconium components, starting from the procurement of feed material up to rolling of sheets, tubes, bars and manufacture of the applicable parts required to manufacture fuel assemblies. Automated state-of-the-art equipment used for advanced productivity, as well as various installations able to perform numerous inspection steps to assure quality of the manufactured products was showcased. The challenges to be addressed in the nearest future were also presented

  15. THE FACTORS AFFECTING ON THE SUCCESS OF IMPLEMENTING TOTAL PRODUCTIVE MAINTENANCE IN THE MANUFACTURING COMPANY (NS BLUESCOPE VIETNAM)

    OpenAIRE

    Pham Van Tai (PhD)*, Dean of International Trade, College of Foreign Economic Relations Phan Cao Huy (MBA), Technical Manager, Bosch Vietnam

    2017-01-01

    The competition in business environment becomes more strictly, manufacturers must introduce lots of new products on the high quality level with suitable price. Thus, new technologies have been applied, manufacturing systems become more complex. Therefore, a new strategy for maintenance such as Total productive maintenance (TPM) becomes really necessary. Many organizations have implemented TPM to increase the effectiveness of manufacturing system. However, implementation of TPM still meets a l...

  16. A Study on the Cost-Effectiveness of a SemiAutomated Cutting Process at a Garment Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Castro, Mark Daniel

    2017-11-01

    Full Text Available The subject of the study, Company X, has been experiencing variations in the quantity report from the cutting department and the transmittal reports. The management found that these processes are hugely affected by manual labor. To reduce the system's proneness to human error, the management decided to explore the possibility of adapting a semi-automated spreading and cutting process in the system. This research aims to evaluate the pre-sewing processes of Company X and whether introducing automation can be beneficial to the company and the garments industry. The researchers used process mapping tools, descriptive research, and process flowchart to assess the current and proposed systems, and engineering economics to evaluate the cost and benefits of implementing the semi-automated system. The results showed that with the implementation of the semi- automated system; the company will incur 66.61% more savings per year than the current system. In terms of cycle time, the semi-automated system eliminated the relaxation of fabric before the cutting process, thereby greatly reducing cycle time. In addition, the researchers found that as long as the company produce more than 4,140 pieces per day for the system will be economically feasible. Unquantifiable benefits are also identified on introducing the semi- automated system to the company. The company can have a cleaner work environment that will lead to more productivity and greater quality of goods. This will lead to a better company image that will encourage more customers to place job orders.

  17. Business model innovation within a Swedish manufacturing company : A study on the impacts of digitalization in a mid-size Swedishmanufacturing company

    OpenAIRE

    Fridén, Mats; Karlsson, Markus

    2017-01-01

    Rapid innovations in technology during the past decades has enabled new business possibilities, which in manyareas has outcompeted old business models. Especially small companies are having problems keeping up inthe process of reevaluating their business model with regards to the possibilities of new technologies. The focus in this thesis has been to describe the process of moving to a digital business and the use of digitaltechnologies by changing the business model and value-producing oppor...

  18. Analyzing the Operations Strategies of Manufacturing Firms Using a Hybrid Grey DEA approach – A case of Fars Cement Companies in Iran

    Directory of Open Access Journals (Sweden)

    Mohamad Amin Kaviani

    2014-11-01

    Full Text Available In competitive markets, the operations strategies of companies are normally formulated based on their competitive advantages. An effective operations strategy should maintain and improve competitive advantages based on the capabilities of the corporate operations resources. Considering the market requirements and the operational performance of the rivals is the key for success and survival of a company in the competition. Therefore, recognizing where a company stands in comparison with its rivals and adopting the appropriate operations strategy plays vital roles in the success of companies. This paper proposes a method for comparing and ranking operations strategies of companies based on the concept of efficient frontier using data envelopment analysis (DEA in grey environment. In the aforementioned method, DEA is used to evaluate the efficiency of operations strategies of manufacturing firms. Also, grey theory is used to support the uncertainty of the experts’ opinions regarding the inputs and outputs of the DEA model. Then the respective units are ranked, and analyses are performed. The proposed approach is applied for the entire nine cement factories of Fars Province in Iran, and the units are ranked, respective analyses are presented regarding the efficient and inefficient units.

  19. [Survey of carbon fiber reinforced plastic orthoses and occupational and medical problems based on a questionnaire administered to companies involved in the manufacture of prosthetics and orthotics].

    Science.gov (United States)

    Kaneshiro, Yuko; Furuta, Nami; Makino, Kenichiro; Wada, Futoshi; Hachisuka, Kenji

    2011-09-01

    We surveyed carbon fiber reinforced plastic orthoses (carbon orthoses) and their associated occupational and medical problems based on a questionnaire sent to 310 companies which were members of the Japan Orthotics and Prosthetics Association. Of all the companies, 232 responded: 77 of the 232 companies dealt with ready-made carbon orthoses, 52 dealt with fabricated custom-made orthoses, and 155 did not dealt with carbon orthoses. Although the total number of custom-made carbon ortheses in Japan was 829/ 5 years, there was a difference by region, and one company fabricated only 12 (per 5 years) custom-made carbon orthoses on average. The advantages of the carbon orthosis were the fact that it was "light weight", "well-fitted", had a "good appearance", and "excellent durability", while the disadvantages were that it was "expensive", "high cost of production", of "black color", and required a "longer time for completion", and "higher fabrication techniques". From the standpoint of industrial medicine, "scattering of fine fragments of carbon fibers", "itching on the skin" and "health hazards" were indicated in companies that manufacture the orthosis. In order to make the carbon orthosis more popular, it is necessary to develop a new carbon material that is easier to fabricate at a lower cost, to improve the fabrication technique, and to resolve the occupational and medical problems.

  20. Motivational factors as determinants of employee commitment and performance enhancement in profit oriented firms: a survey of selected brewery manufacturing companies in Nigeria

    Directory of Open Access Journals (Sweden)

    Sev Joseph Teryima

    2016-07-01

    Full Text Available The objective of the study is to investigate the Impact of Motivational Factors such as extrinsic, intrinsic rewards and social motivational on employee commitment and performance enhancement in profit oriented firms with a focus on selected Brewery Manufacturing firms in Nigeria. Data for this research is obtained from both primary and secondary sources. The sample size for the study is 280 from six (6 Brewery firms. Multiple Regression test was used in testing the two (2 formulated hypotheses. The study findings revealed that motivational factors such as Intrinsic, extrinsic and social motivation have a good relationship with employee commitment and performance enhancement in profit oriented firms especially Brewery manufacturing companies. Other findings were that lack of motivational incentives will lead to employee frustration in these companies. The study recommends that adequate and consistent provision of intrinsic, extrinsic and social motivational incentive packages to staff to facilitate employee commitment and high performance attainment is important at all times. The study also recommended that, establishing organizational objectives and goals by companies is a good starting point by management to know the essential motivational incentives that should be granted to employees for productivity attainment.

  1. THE INFLUENCE OF PROFITABILITY, LIQUIDITY, AND DEBT TO THE DIVIDEND PAYOUT RATIO IN MANUFACTURING COMPANY (LISTED IN INDONESIAN STOCK EXCHANGE FROM 2008-2010

    Directory of Open Access Journals (Sweden)

    Putri Kartika Sari

    2015-11-01

    Full Text Available AbstractThis research analyzes the influence of profitability, liquidity, and debt to dividend payout ratio in manufacturing companies in Indonesia. The samples consist of 102 companies listed in Indonesian Stock Exchange during the period of 2008-2010. This research tests three hypotheses related to the influence of profitability, liquidity, and debt toward the dividend payout ratio (DPR. Data obtained were analyzed by using multiple regression analysis. The results of this research indicate that: (1 profitability ratio (ROI has positively significant influence to dividend payout ratio. (2 Liquidity ratio (QR does not significantly influence to dividend payout ratio. (3 Debt ratio (DER does not significantly influence to dividend payout ratio.Keywords: profitability, liquidity, debt, Dividend Payout Ratio (DPR, manufacturing company.AbstrakPenelitian ini bertujuan untuk menganalisis pengaruh profitabilitas, likuiditas, dan utang terhadap rasio pembayaran dividen dalam perusahaan-perusahaan manufaktur di Indonesia. Sampel terdiri dari 102 perusahaan yang terdaftar di Bursa saham Indonesia selama periode tahun 2008-2010. Penelitian ini menguji tiga hipotesa yang berkaitan dengan pengaruh profitabilitas, likuiditas, dan utang terhadap rasio pembayaran dividen (DPR. Data yang diperoleh dianalisis dengan menggunakan analisis regresi. Hasil dari penelitian ini menunjukkan bahwa: (1 profitabilitas rasio (ROI memiliki pengaruh positif dan signifikan terhadap rasio pembayaran dividen. (2 rasio likuiditas (QR tidak berpengaruh terhadap rasio pembayaran dividen. (3 Rasio hutang (DER tidak berpengaruh atas rasio pembayaran dividen.Kata kunci: profitabilitas, likuiditas, utang, rasio pembayaran dividen (DPR, manufaktur perusahaan.

  2. How To Set Up Your Own Small Business. Service Company Case Study. Manufacturing Firm Case Study. Retail Store Case Study.

    Science.gov (United States)

    Fallek, Max

    This collection of case studies is intended for use in a course in setting up a small business. The first, a case study of the process of setting up a service company, covers analyzing the pros and cons of starting one's own business, assessing the competition and local market, and selecting a site for and financing the business. The principal…

  3. THE EFFECTS OF EARNINGS MANAGEMENT ON ACCOUNTING CONSERVATISM MODERATED BY CORPORATE GOVERNANCE MECHANISM (STUDY OF MANUFACTURING COMPANIES LISTEDON INDONESIA STOCK EXCHANGEIN 2008 – 2010

    Directory of Open Access Journals (Sweden)

    AMMAR AL ASYARI

    2013-07-01

    Full Text Available This study aimsto examine earnings management by companies manufacturing in Indonesia affect the choice of managers to implement aconservative accounting policy. With corporate governance mechanisms in influencing the relationship of Earning Management on Accounting Conservatism. Methods of analysis using multiple linear regression analysis with one independent variable, one dependent variable and two variables moderation. Corporate governance mechanismuses two characteristics as moderating variables, managerial ownership and board of commissioners. Size using the accrua lconservatism, according to those used by Givolyand Hayn (2002 and discretionary accruals as aproxy for earnings management is computed using the Modified Jones Model (Dechow etal., 1995. By using the purposive sampling method, the sample in this research consists of 23 manufacturing companies that listed on Indonesia Stock Exchange in 2008 – 2010. This research use secondary data which is collected from the firm’s annual report and financial statements. The result of this research shows that simultaneously, earning management, managerial ownership, and board of commissioners influence accounting conservatism. Partially, only earning management that significantly influences accounting conservatism. While managerial ownership and board of commissioners do not significantly influence the relationship of Earning Management on Accounting Conservatism.

  4. A Study on the Removal of Direct Blue 71 Dye From Textile Wastewater Produced From State Company of Cotton Industries by Electrocoagulation Using Aluminum Electrodes

    Directory of Open Access Journals (Sweden)

    Karim Khalifa Esgair

    2017-02-01

    Full Text Available The removal of direct blue 71 dye from a prepared wastewater was studied employing batch electrocoagulation (EC cell. The electrodes of aluminum were used. The influence of process variables which include initial pH (2.0-12.0, wastewater conductivity (0.8 -12.57 mS/cm , initial dye concentration (30 -210 mg/L, electrolysis time (3-12 min, current density (10-50 mA/cm2 were studied in order to maximize the color removal from wastewater. Experimental results showed that the color removal yield increases with increasing pH until pH 6.0 after that it decreased with increasing pH. The color removal increased with increasing current density, wastewater conductivity, electrolysis time, and decreased with increasing the concentration of initial dye. The maximum color removal yield of 96.5% was obtained at pH 6.0, wastewater conductivity 9.28 mS/cm , electrolysis time 6 min ,the concentration of initial dye 6 0 mg/L and current density 30 mA/cm2 .

  5. Advancing on the implementation of lean internal logistics: dificulties and results on the case of an automotive manufacturing company

    Directory of Open Access Journals (Sweden)

    Giuliano Almeida Marodin

    2012-06-01

    Full Text Available The main purpose of lean production (LP is to produce more with fewer resources, for example less people, space, time and stock. The lesser quantity of resources on the production system increases the demand for greater quality and flexibility to the internal logistics. However, the amount of articles on the subject is sparse and mainly focused on the first steps of the implementation process. This article had the following objectives: to analyze the internal logistic of a plant that already uses LP practices, to propose and to implement improvements. The method used was an action research that adapts the Harris et al. (2004 guidelines to be used on a company that already use LP practices. As results, the study allowed the solution of several problems before the implementation of the new routes. As results for the company, there were several process improvements, as well as the reduction of direct logistics costs and improvement of the work balancing among routes.

  6. THE INFLUENCE OF INDIVIDUAL KNOWLEDGE AND WORK TEAM DEVELOPMENT TO THE MANUFACTURING COMPANY PERFORMANCE OF IN EAST JAVA

    Directory of Open Access Journals (Sweden)

    Widjojo Suprapto

    2017-03-01

    Full Text Available Individual knowledge is the fundamental human capital to contribute to the greatness of the company.The personal capability and competence should be dispersed to other individuals within the organization toform a work team that is reliable and motivated so that each individual can easily do the workcommunication. As a result, it gives an impact on the flexibility of working people and eventually canimprove the company performance. The data are collected by questionnaires that are distributed to 90industrial practitioners, with the 86 completed data that can be further processed. The result of this studystates that the individual knowledge influences strongly on the development of the competent work team, andenhances the collaboration and communication process. The development of the work teams in the companyaffects the collaboration, communication, and effectiveness of the work teams. Finally, the cooperation andcommunication in the work place and the effectiveness of the work teams together improve the companyperformance.

  7. Internationalization manager’s identity and authority identification:staffing of the export department in Greek internationalized manufacturing companies

    OpenAIRE

    Garri, Myropi; Konstantopoulos, Nikolaos

    2011-01-01

    The research objective of this paper is to examine the staffing procedure of the internationalization department of the company in reference to the origin of the individuals selected to compose it. Subsequently, we endeavour to outline the identity of the individual at the head of internationalization, where a special department doesn’t exist. Additionally, we attempt to recognize the overall responsibilities and authority spaces of the internationalization manager. Results implied the prefer...

  8. The Effect of Cash Dividend, Retained Earnings, and Stock Price of Manufacturing Company Listed In Indonesia Stock Exchange

    OpenAIRE

    Farah Margaretha

    2015-01-01

    This study aims to determine the effect of cash dividends per share, retained earnings per share, earnings per share, and leverage on the stock price of manufacture industry in Indonesia from 2008-2012. Research used secondary data in which the source was obtained indirectly through an intermediary medium or data processed from literatures and reports associated with this research. Independent variables in this study (x) are cash dividends per share, retained earnings per share, earnings per ...

  9. ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

    OpenAIRE

    Nafees Ahmed Memon; Qazi Muhammad Moinuddin Abro; Zubair Ahmed Memon

    2011-01-01

    Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System) in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The constr...

  10. Laser Dyes

    Indian Academy of Sciences (India)

    amplification or generation of coherent light waves in the UV,. VIS, and near IR region. .... ciency in most flashlamp pumped dye lasers. It is used as reference dye .... have led to superior laser dyes with increased photostabilities. For instance ...

  11. From Offshoring to Backshoring: The Path of Two Danish Companies and Implications in the Next Era of Chinese Manufacturing

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Madsen, Erik Skov

    2015-01-01

    The purpose of this paper is to examine the evolution of offshoring over time. The paper employs qualitative methodology and on the basis of two case studies of Danish companies, it develops a framework conceptualizing the stages of offshoring and highlights the factors driving the transition...... between these stages. The framework challenges the linear nature of offshoring and proposes the existence of ‘the pendulum effect’. The pendulum effect suggests that the modes of offshoring (i.e. captive and non-captive) and geographies of offshoring (i.e. home and abroad) are not static; rather...

  12. An Agent-based Manufacturing Management System for Production and Logistics within Cross-Company Regional and National Production Networks

    Directory of Open Access Journals (Sweden)

    T. Hanel

    2008-11-01

    Full Text Available The goal is the development of a simultaneous, dynamic, technological as well as logistical real-time planning and an organizational control of the production by the production units themselves, working in the production network under the use of Multi-Agent-Technology. The design of the multi-agent-based manufacturing management system, the models of the single agents, algorithms for the agent-based, decentralized dispatching of orders, strategies and data management concepts as well as their integration into the SCM, basing on the solution described, will be explained in the following.

  13. An Agent-Based Manufacturing Management System for Production and Logistics within Cross-Company Regional and National Production Networks

    Directory of Open Access Journals (Sweden)

    S. Heinrich

    2005-03-01

    Full Text Available The goal is the development of a simultaneous, dynamic, technological as well as logistical real-time planning and an organizational control of the production by the production units themselves, working in the production network under the use of Multi-Agent-Technology. The design of the multi-agent-based manufacturing management system, the models of the single agents, algorithms for the agent-based, decentralized dispatching of orders, strategies and data management concepts as well as their integration into the SCM, basing on the solution described, will be explained in the following.

  14. Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies

    Science.gov (United States)

    Osezua Aikhuele, Daniel; Mohd Turan, Faiz

    2016-02-01

    The instability in today's market and the emerging demands for mass customized products by customers, are driving companies to seek for cost effective and time efficient improvements in their production system and this have led to real pressure for the adaptation of new developmental architecture and operational parameters to remain competitive in the market. Among such developmental architecture adopted, is the integration of lean thinking in the product development process. However, due to lack of clear understanding of the lean performance and its measurements, many companies are unable to implement and fully integrate the lean principle into their product development process and without a proper performance measurement, the performance level of the organizational value stream will be unknown and the specific area of improvement as it relates to the LPD program cannot be tracked. Hence, it will result in poor decision making in the LPD implementation. This paper therefore seeks to present a conceptual model for evaluation of LPD performances by identifying and analysing the core existing LPD enabler (Chief Engineer, Cross-functional teams, Set-based engineering, Poka-yoke (mistakeproofing), Knowledge-based environment, Value-focused planning and development, Top management support, Technology, Supplier integration, Workforce commitment and Continuous improvement culture) for assessing the LPD performance.

  15. Derivation of residual radioactive material guidelines for uranium in soil at the Former Associate Aircraft Tool and Manufacturing Company Site, Fairfield, Ohio

    International Nuclear Information System (INIS)

    Faillace, E.R.; Nimmagadda, M.; Yu, C.

    1995-01-01

    Residual radioactive material guidelines for uranium in soil were derived for the former Associate Aircraft Tool and Manufacturing Company site in Fairfield, Ohio. This site has been identified for remedial action under the U.S. Department of Energy's (DOE's) Formerly Utilized Sites Remedial Action Program (FUSRAP). Single-nuclide and total-uranium guidelines were derived on the basis of the requirement that, after remedial action, the 50-year committed effective dose equivalent to a hypothetical individual living or working in the immediate vicinity of the site should not exceed (1) 30 mrem/yr for the current-use and likely future-use scenarios or (2) 100 mrem/yr for less likely future-use scenarios. The DOE residual radioactive material (RESRAD) computer code, which implements the methodology described in the DOE manual for establishing residual radioactive material guidelines, was used in this evaluation

  16. Synthesis of azo pyridone dyes

    Directory of Open Access Journals (Sweden)

    Mijin Dušan Ž.

    2011-01-01

    Full Text Available Over 50% of all colorants which are used nowdays are azo dyes and pigments, and among them arylazo pyridone dyes (and pigments have became of interest in last several decades due to the high molar extinction coefficient, and the medium to high light and wet fastness properties. They find application generally as disperse dyes. The importance of disperse dyes increased in the 1970s and 1980s due to the use of polyester and nylon as the main synthetic fibers. Also, disperse dyes were used rapidly since 1970 in inks for the heat-transfer printing of polyester. The main synthetic route for the preparation of azo dyes is coupling reaction between an aromatic diazo compound and a coupling component. Of all dyes manufactured, about 60% are produced by this reaction. Arylazo pyridone dyes can be prepared from pyridone moiety as a coupling component, where substituent can be on nitrogen, and diazonim salts which can be derived from different substituted anilines or other heterocyclic derivatives. In addition, arylazo dyes containing pyridone ring can be prepared from arylazo diketones or arylazo ketoesters (obtained by coupling β-diketones or β-ketoesters with diazonim salts by condensation with cyanoacetamide. Disazo dyes can be prepared by tetrazotizing a dianiline and coupling it with a pyridone or by diazotizing aniline and coupling it with a dipyridone. Trisazo dyes can be also prepared by diazotizing of aniline and coupling it with a tripyridone or by hexazotizing a trianiline and coupling it with a pyridone. The main goal of this paper is to give a brief review on the synthesis of arylazo pyridone dyes due to the lack of such reviews. In addition, some properties of arylazo pyridone dyes as light fastness and azo-hydrazon tautomerism are disccused.

  17. Closeout of NRC Bulletin 88-05: Nonconforming materials supplied by Piping Supplies, Inc., at Folsom, New Jersey, and West Jersey Manufacturing Company at Williamstown, New Jersey

    International Nuclear Information System (INIS)

    1990-05-01

    This report documents the activities that led to the closeout of U.S. Nuclear Regulatory Commission (NRC) Bulletin 88-05, which was issued on May 6, 1988. The bulletin required that licensees submit information on materials supplied by Piping Supplies, Inc. (PSI) and West Jersey Manufacturing Company (WJM), and requested that they (1) ensure that these materials complied with the American Society of Mechanical Engineers, Boiler and Pressure Vessel Code (ASME Code) and design specifications or were suitable for their intended service or (2) replace such materials. Supplements 1 and 2 were issued on June 15 and August 3, 1988, respectively. In Supplement 2, another affiliated supplier, Chews Landing Metal Manufacturers, Incorporated (CLM), was identified. The staff concluded that (1) the analytical procedures used to qualify the nonconforming parts and the analysis results provide and adequate basis for resolving the staff's concerns regarding fitting and flanges; (2) even though the materials supplied by PSI, WJM, and CLM with falsified certified material test reports do not meet the ASME Code, their use is an acceptable alternative in accordance with Section 50.55a(a)(3)(ii) of Title 10 of the Code of Federal Regulations; (3) activities in response to Bulletin 88-05 regarding fittings and flanges can be closed for all operating plants; and (4) licensees should evaluate the use of product forms other fittings and flanges

  18. Fatores críticos para a melhoria contínua em indústrias brasileiras Critical factors for the continuous improvement in brazilian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Pedro Carlos Oprime

    2011-03-01

    Full Text Available O objetivo deste artigo é identificar e analisar fatores críticos no desenvolvimento de atividades de melhoria contínua (MC em empresas industriais brasileiras. Um modelo conceitual de relacionamento entre práticas e resultados foi testado por meio de um survey utilizando uma amostra de 46 empresas industriais. Fatores como: treinamento em ferramentas de solução de problemas, o incentivo a sugestões, a comunicação face a face, visitas ao chão de fábrica e adoção de sistemas de incentivos, se mostraram críticos para alcance de sucesso em atividades de MC. Identificaram pela análise fatorial dois constructos críticos relacionados ao processo de melhoria contínua: 1 a promoção das atividades de melhoria contínua por meio de políticas de incentivos; e 2 o suporte e liderança da alta administração e ativa participação da gerência. Observou-se que há relação estatisticamente significativa entre o uso de técnicas de solução de problemas e mecanismos de incentivos com o desempenho das empresas.The aim of this paper is to identify and analyze critical factors in the development of continuous improvement (CI activities in Brazilian manufacturing companies. A conceptual model of relationship between practices and results was tested through a survey conducted in 46 manufacturing companies. Factors such as: problems solving tools training, suggestion incentives, face-to-face communication, visits to the shop floor and adoption of incentive systems, have proved to be critical at reaching success in CI activities. Through factorial analysis, two critical constructs concerning continuous improvement process were identified: 1 promotion of continuous improvement through incentive mechanisms; and 2 High level management support and leadership and management active involvement. It was observed that there is a statistically meaningful relationship between the use of problem solving techniques and the incentive mechanisms in face of

  19. Reconfigurable manufacturing system for agile mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2006-07-01

    Full Text Available Manufacturing companies are facing three challenges: low cost production of product, high quality standard and rapid responsiveness to customer requirements. These three goals are equally important for the manufacturing companies who want...

  20. Establishment of reference costs for occupational health services and implementation of cost management in Japanese manufacturing companies.

    Science.gov (United States)

    Nagata, Tomohisa; Mori, Koji; Aratake, Yutaka; Ide, Hiroshi; Nobori, Junichiro; Kojima, Reiko; Odagami, Kiminori; Kato, Anna; Hiraoka, Mika; Shiota, Naoki; Kobayashi, Yuichi; Ito, Masato; Tsutsumi, Akizumi; Matsuda, Shinya

    2016-07-22

    We developed a standardized cost estimation method for occupational health (OH) services. The purpose of this study was to set reference OH services costs and to conduct OH services cost management assessments in two workplaces by comparing actual OH services costs with the reference costs. Data were obtained from retrospective analyses of OH services costs regarding 15 OH activities over a 1-year period in three manufacturing workplaces. We set the reference OH services costs in one of the three locations and compared OH services costs of each of the two other workplaces with the reference costs. The total reference OH services cost was 176,654 Japanese yen (JPY) per employee. The personnel cost for OH staff to conduct OH services was JPY 47,993, and the personnel cost for non-OH staff was JPY 38,699. The personnel cost for receipt of OH services-opportunity cost-was JPY 19,747, expense was JPY 25,512, depreciation expense was 34,849, and outsourcing cost was JPY 9,854. We compared actual OH services costs from two workplaces (the total OH services costs were JPY 182,151 and JPY 238,023) with the reference costs according to OH activity. The actual costs were different from the reference costs, especially in the case of personnel cost for non-OH staff, expense, and depreciation expense. Using our cost estimation tool, it is helpful to compare actual OH services cost data with reference cost data. The outcomes help employers make informed decisions regarding investment in OH services.

  1. Treatment of dye house effluents

    International Nuclear Information System (INIS)

    Waheed, S.; Ashraf, C.M.

    1999-01-01

    Environmental considerations play an increasingly important role in processing of textiles. For textile, limits on particular substances have been and are being laid down either by law or as a result of the demands of clothing manufactures. One of the most complex areas in textile processing is textile printing and dyeing. Here, virtually all dye classes are used. In some printing processes such as reactive printing, many of products used end up in the wastewater. A study of the optimisation of wastewater treatment systems and the systematic management of water and the problems of dyeing are reviewed in this article. (author)

  2. Appraising manufacturing location

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    International location of manufacturing activities is an issue for managers of manufacturing companies as well as public policy makers. For managers, the issue is relevant because international locations offer opportunities for lowering costs due to productivity improvements. For governments the

  3. Insomnia symptoms and their association with workplace productivity: cross-sectional and pre-post intervention analyses from a large multinational manufacturing company.

    Science.gov (United States)

    Espie, Colin A; Pawlecki, Brent; Waterfield, Dickon; Fitton, Kit; Radocchia, Michael; Luik, Annemarie I

    2018-06-01

    Symptoms of insomnia are common and might impact work productivity. We investigated the relationship between insomnia symptoms and workplace productivity in a global manufacturing company. Within an uncontrolled, cross-sectional study, employees from a US-based company were invited to participate in an online evaluation comprising the Sleep Condition Indicator (SCI) measuring symptoms of insomnia (high score indicating better sleep), 2 items of the Work Productivity and Impairment Index (WPAI) measuring 'presenteeism' and 'absenteeism' (high score indicating loss of work productivity) and 1 item of the Perceived Stress Scale (PSS) from January 2015 onwards. Pre-post, within-subject data were collected to preliminary test effects of 'sleep tips' and digital cognitive behavioral therapy (dCBT). In 2798 employees [72% male; mean age 46.3(SD11.8) yrs] sleep was poorest in plant staff [SCI = 3.70(2.73)], then retail staff [4.34(3.02)], then office staff [4.95(2.83): overall F(2,2786) = 43.7, P work-related productivity, with stress only contributing a further 9%. A regression model for 'absenteeism' was statistically significant but of limited predictive value (R 2 = 3.4%). In a sample of 214 employees with pre- and post-intervention data, the SCI of those exposed to sleep tips significantly increased from 5.36(3.28) to 6.01(3.22), [t(123) = -3.02, P = .003] and from 3.08(2.24) to 6.03(2.97) for those who accessed dCBT [t(89) = -8.40, P work productivity. Additionally, targeted insomnia interventions may offer potential to improve sleep and work productivity. Copyright © 2018 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

  4. A hybrid approach based on ANP, ELECTRE and SIMANP metaheuristic method for outsourcing manufacturing procedures according to supply chain risks - Case study: A medical equipment manufacturer company in Iran

    Directory of Open Access Journals (Sweden)

    Hiwa Farughi

    2017-01-01

    Full Text Available Nowadays enterprises should consider seeking to reduce the supply chain risks as a crucial part of their activities in order to improve their competitiveness in the international context. Choosing the suitable strategy in connection with assigning some parts of the production process to outside the organization is a complex multi-criteria decision making problem and it gets more complicated when supply chain risk factors as the factors to select the strategy as well as dependence and the close ties between these criteria also be considered. In this paper, after the identification of risks in the supply chain of a medical equipment manufacturer company, dependence and ties between criteria in line with choosing the best strategy among existing alternatives has been examined in the form of a combined ANP-ELECTRE method. This combined model is of high performance to give a solution to the problem considered in this paper. But given the complex and time consuming nature of the AHP and ELECTRE, in this study a meta-heuristic algorithm is developed called SIMANP that despite the simplicity of computing and high-speed, is good in the terms of precision and efficiency. The results of comparing SIMANP algorithm and the proposed ANP - ELECTRE method are presented at the end.

  5. Smart Manufacturing.

    Science.gov (United States)

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  6. Dye solar cell research

    CSIR Research Space (South Africa)

    Cummings, F

    2009-11-01

    Full Text Available Cummings Energy and Processes Materials Science and Manufacturing Council for Scientific and Industrial Research P.O. Box 395 Pretoria 0001, South Africa 27 November 2009 CONTENT head2rightBackground head2rightCSIR Dye Solar Cell Research head2... rightCollaborations and Links © CSIR 2007 www.csir.co.za head2rightAcknowledgements BACKGROUND head2rightSA is dry: Annual rainfall average of 450 mm compared with a world average of 860 mm head2rightOn upside, we have some...

  7. Process Improvement of Reactive Dye Synthesis Using Six Sigma Concept

    Science.gov (United States)

    Suwanich, Thanapat; Chutima, Parames

    2017-06-01

    This research focuses on the problem occurred in the reactive dye synthesis process of a global manufacturer in Thailand which producing various chemicals for reactive dye products to supply global industries such as chemicals, textiles and garments. The product named “Reactive Blue Base” is selected in this study because it has highest demand and the current chemical yield shows a high variation, i.e. yield variation of 90.4% - 99.1% (S.D. = 2.405 and Cpk = -0.08) and average yield is 94.5% (lower than the 95% standard set by the company). The Six Sigma concept is applied aiming at increasing yield and reducing variation of this process. This approach is suitable since it provides a systematic guideline with five improvement phases (DMAIC) to effectively tackle the problem and find the appropriate parameter settings of the process. Under the new parameter settings, the process yield variation is reduced to range between 96.5% - 98.5% (S.D. = 0.525 and Cpk = 1.83) and the average yield is increased to 97.5% (higher than the 95% standard set by the company).

  8. Nano-dyeing

    Directory of Open Access Journals (Sweden)

    Ning Cui-Juan

    2016-01-01

    Full Text Available Dyeing nanofibers is a frontier of both modern textile engineering and nanotechnology. This paper suggest a feasible method for dyeing nanofibers with a natural red (Roselle Calyx by bubble electrospinning. Reactive dye (Red S3B and acid dye (Red 2B were also used in the experiment for comparison. The dyeing process was finished during the spinning process.

  9. Manufacturing network evolution

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2011-01-01

    Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

  10. El efecto del tipo de producto fabricado y del tamaño de la empresa en los resultados productivos de las empresas de pavimentos y revestimientos cerámicos de la Comunidad Valenciana Effect of the type of product manufactured and of company size on the productive results of ceramic tile manufacturers of the Valenciana Community

    Directory of Open Access Journals (Sweden)

    Juan Antonio Marín-Garcia

    2006-04-01

    Full Text Available En este artículo, describimos los datos recogidos en las entrevistas realizadas a 101 directores de producción y en las visitas posteriores a sus plantas. En él, presentamos la importancia que tiene el tipo de producto fabricado y el número de trabajadores en plantilla, para explicar las diferencias que existen en los resultados productivos de las empresas. Algunos indicadores como el plazo de fabricación, la cantidad de inventario de producto terminado o la productividad por operario, son sensiblemente diferentes en las distintas agrupaciones de empresas. Sin embargo, la satisfacción percibida por el mando de producción apenas varía al agrupar las empresas por producto fabricado.This article presents an analysis of data compiled from interviews with 101 production managers and from subsequent plant visits, revealing the relevance of the type of products companies manufacture and the number of employees they have in explaining the differences in their productive results. Some indicators, such as manufacturing lead times, finished product inventories and productivity per worker, differ significantly from one company to another. As a result, the parameter of production manager satisfaction varies only very slightly when grouping companies in terms of product manufactured.

  11. Strategic Roles of Manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng

    with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

  12. Current status and future prospects of research and development operations in traditional and complementary and alternative medicine manufacturing small- and medium-sized enterprises: a 2014 company-based survey.

    Science.gov (United States)

    Ahn, Miyoung; Park, Eun-Ji; Woo, Jong-Min

    2017-12-01

    Small- and medium-sized enterprises (SMEs) have played key roles in the economic growth and technical innovation of traditional and complementary and alternative medicine (T&CM). Research and development (R&D) are critical activities for industrial progress. This study aimed to characterize the current status of SME R&D activities and to explore manufacturers' perceptions of R&D expansion. Records of the distribution of T&CM SMEs and R&D resources detailed in the 2014 Statistics of Korea T&CM Industries survey, a previously conducted survey on the industrial status of the T&CM field, were reviewed. Data on the perceptions of R&D activities were investigated through a company-based survey covering 285 T&CM-manufacturing SMEs. Greater than 99% of the 13,636 T&CM manufacturers at the time of the study were SMEs employing less than 50 workers. Natural cosmetics manufacturing SMEs (NC SMEs) had the highest R&D expenditures. NC SMEs rely heavily on internal R&D operations, which may contribute to their strong need for R&D collaboration with public research institutions and expanded T&CM-promoted R&D programs. "Digestive system disorders" are the main target diseases for current herbal and dietary supplement manufacturing SMEs and herbal medicine manufacturing SMEs. These SMEs tend to view their own product-related business as a priority for future R&D investment. This study represents the first attempt to assess SME perceptions of R&D activities. The findings herein can inform the design of sustainable programs that support R&D by reducing the gaps between the perspectives of T&CM product makers and policymakers.

  13. Current status and future prospects of research and development operations in traditional and complementary and alternative medicine manufacturing small- and medium-sized enterprises: a 2014 company-based survey

    Directory of Open Access Journals (Sweden)

    Miyoung Ahn

    2017-12-01

    Full Text Available Background: Small- and medium-sized enterprises (SMEs have played key roles in the economic growth and technical innovation of traditional and complementary and alternative medicine (T&CM. Research and development (R&D are critical activities for industrial progress. This study aimed to characterize the current status of SME R&D activities and to explore manufacturers’ perceptions of R&D expansion. Methods: Records of the distribution of T&CM SMEs and R&D resources detailed in the 2014 Statistics of Korea T&CM Industries survey, a previously conducted survey on the industrial status of the T&CM field, were reviewed. Data on the perceptions of R&D activities were investigated through a company-based survey covering 285 T&CM-manufacturing SMEs. Results: Greater than 99% of the 13,636 T&CM manufacturers at the time of the study were SMEs employing less than 50 workers. Natural cosmetics manufacturing SMEs (NC SMEs had the highest R&D expenditures. NC SMEs rely heavily on internal R&D operations, which may contribute to their strong need for R&D collaboration with public research institutions and expanded T&CM-promoted R&D programs. “Digestive system disorders” are the main target diseases for current herbal and dietary supplement manufacturing SMEs and herbal medicine manufacturing SMEs. These SMEs tend to view their own product-related business as a priority for future R&D investment. Conclusion: This study represents the first attempt to assess SME perceptions of R&D activities. The findings herein can inform the design of sustainable programs that support R&D by reducing the gaps between the perspectives of T&CM product makers and policymakers. Keywords: R&D, SME, South Korea, survey, T&CM

  14. Hair dye poisoning

    Science.gov (United States)

    Hair tint poisoning ... Different types of hair dye contain different harmful ingredients. The harmful ingredients in permanent dyes are: Naphthylamine Other aromatic amino compounds Phenylenediamines Toluene ...

  15. Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

    Science.gov (United States)

    Spence, Paul; Liu, Gi-Zen

    2013-01-01

    The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…

  16. SOLVENT-BASED TO WATERBASED ADHESIVE-COATED SUBSTRATE RETROFIT - VOLUME IV: FILM AND LABEL MANUFACTURING CASE STUDY: FLEXCON COMPANY, INC.

    Science.gov (United States)

    This volume discusses a visit to a site operated by FLEXcon Company, Inc., a pressure-sensitive adhesive coater, to collect information on the pollution prevention opportunities and barriers associated with waterbased adhesives. The purpose of the visit to FLEXcon was to gather i...

  17. Analysis of accidents leading to amputations associated with operating with press machines, using Ishikawa and SCAT Combined method in a car manufacturing company

    Directory of Open Access Journals (Sweden)

    J. Nematolahi

    2015-12-01

      Conclusion: According to results, the main interfce causes of accidents leading to amputation due to operating with press machines is hurry at work because of increased production volume particularly by contractor companies. Furthermore, non-dynamic HSE system accompanied by ineffective supervision of personnel’s unsafe acts by the first layers of management are recognized as the basic causes of such accidents.

  18. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    Directory of Open Access Journals (Sweden)

    Syed Farman Ali Shah

    2015-12-01

    Full Text Available The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO, granulated activated carbon (GAC bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO4-lime influenced reduction of COD, color, turbidity and TSS by 32%, 48%, 50% and 51%, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88%, 92%, 67% and89%, respectively.

  19. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    International Nuclear Information System (INIS)

    Shah, S.F.A.; Aftab, A.; Soomro, N.; Nawaz, M.S.; Vafai, K.

    2015-01-01

    The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO), granulated activated carbon (GAC) bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO/sun 4/-lime influenced reduction of COD, color, turbidity and TSS by 32 percentage, 48 percentage, 50 percentage and 51 percentage, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88 percentage, 92 percentage, 67 percentage and 89 percentage, respectively. (author)

  20. Manufacturing in Denmark

    DEFF Research Database (Denmark)

    Hansen, Johannes; Boer, Henrike Engele Elisabeth; Boer, Harry

    This report compares the manufacturing strategies, practices, performances and improvement activities of 39 companies that are representative for the Danish assembly industry with those of 804 companies from 19 other countries. The data supporting this report were collected in 2013 and concern...

  1. Measuring Manufacturing Innovativeness

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    2017-01-01

    Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

  2. Manufacturing ontology through templates

    Directory of Open Access Journals (Sweden)

    Diciuc Vlad

    2017-01-01

    Full Text Available The manufacturing industry contains a high volume of knowhow and of high value, much of it being held by key persons in the company. The passing of this know-how is the basis of manufacturing ontology. Among other methods like advanced filtering and algorithm based decision making, one way of handling the manufacturing ontology is via templates. The current paper tackles this approach and highlights the advantages concluding with some recommendations.

  3. COMPARATIVE STUDY OF TWO DYEING METHODS USING REACTIVE DYE

    Directory of Open Access Journals (Sweden)

    HINOJOSA Belén

    2016-05-01

    Full Text Available Environment preservation is a common worry not only for people but for companies as well. Industry is more and more concern about the necessity of developing new and more respectful processes. Dye is one of the most important processes in the textile industry but it is also considered as no too safe regarding environment issues. This process uses large amounts of water and generates big volumes of wastewater. Following this issue, new regulations and laws emerge to control the waste generated. This leads to the companies and increased costs in terms of wastewater treatments and high water consumption. In this research we compare two systems on garment finishing application, the conventional bath process and the new Ecofinish system that is able to save water and product. To compare these processes, we carried out a reactive dyeing using both systems in order to determine the quality differences in the final product. For this purpose, the samples have been tested to washing and rubbing fastness, according to UNE EN ISO 105 C10 and UNE- EN ISO 105 X12 standards, respectively. This study confirms that this system achieves water savings and reduces the wastewater produced, getting a good dyeing. This process can be considered as an alternative to the conventional one.

  4. Anaerobic azo dye reduction

    OpenAIRE

    Zee, van der, F.P.

    2002-01-01

    Azo dyes, aromatic moieties linked together by azo (-N=N-) chromophores, represent the largest class of dyes used in textile-processing and other industries. The release of these compounds into the environment is undesirable, not only because of their colour, but also because many azo dyes and their breakdown products are toxic and/or mutagenic to life. To remove azo dyes from wastewater, a biological treatment strategy based on anaerobic reduction of the azo dye...

  5. Synthesis, photophysical and preliminary investigation of the dye

    Indian Academy of Sciences (India)

    Synthesis, photophysical and preliminary investigation of the dye-sensitized solar ... with most reduction potential which might be due to increase in the conjugation of ... CSIR Materials Science and Manufacturing, PO Box 395, Pretoria 0001, ...

  6. Modular mechatronic control of reconfigurable manufacturing system for mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2007-01-01

    Full Text Available Manufacturing companies are faced with the challenge of unpredictable, high frequency market changes in both local and international markets. There is a need for greater, more effective responsiveness by manufacturers to change their manufacturing...

  7. Competitive manufacturing strategies for the manufacturing industries in Turkey

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz

    2003-01-01

    In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

  8. Demographic, health-related, and work-related factors associated with body mass index and body fat percentage among workers at six Connecticut manufacturing companies across different age groups: a cohort study.

    Science.gov (United States)

    Garza, Jennifer L; Dugan, Alicia G; Faghri, Pouran D; Gorin, Amy A; Huedo-Medina, Tania B; Kenny, Anne M; Cherniack, Martin G; Cavallari, Jennifer M

    2015-01-01

    Effective workplace interventions that consider the multifactorial nature of obesity are needed to reduce and prevent obesity among adults. Furthermore, the factors associated with obesity may differ for workers across age groups. Therefore, the objective of this study was to identify demographic, health-related, and work-related factors associated with baseline and changes in body mass index (BMI) and body fat percentage (BFP) and among Connecticut manufacturing workers acrossage groups. BMI and BFPof 758 workers from six Connecticut manufacturing companies were objectively measuredat two time points approximately 36 months apart. Demographic, health-related, and work-related factors wereassessed via questionnaire. All variables were included in linear regression models to identify factors associated with baseline and changes in BMI and BFP for workers in 3 age groups: 55 years (28 %). There were differences in baseline and changes in BMI and BFP among manufacturing workers across age groups. Being interested in changing weight was significantly (p gender (BMI p = 0.04), female gender (BFP p gender (BMI p = 0.02), female gender (BFP p gender (BFP p 55 year age category. Few factors were associated with change in BMI or BFP across any age category. Among manufacturing workers, we identified associations between individual, health-related, and work-related factors and baseline BMIand BFP that differed by age. Such results support the use of strategies tailored to the challenges faced by workers in specific age groups rather than adopting a one size fits all approach. Effective interventions should consider a full range of individual, health-related, and work-related factors. More work must be done to identify factors or strategies associated with changes in obesity over time.

  9. Green Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  10. Tunable Microfluidic Dye Laser

    DEFF Research Database (Denmark)

    Olsen, Brian Bilenberg; Helbo, Bjarne; Kutter, Jörg Peter

    2003-01-01

    We present a tunable microfluidic dye laser fabricated in SU-8. The tunability is enabled by integrating a microfluidic diffusion mixer with an existing microfluidic dye laser design by Helbo et al. By controlling the relative flows in the mixer between a dye solution and a solvent......, the concentration of dye in the laser cavity can be adjusted, allowing the wavelength to be tuned. Wavelength tuning controlled by the dye concentration was demonstrated with macroscopic dye lasers already in 1971, but this principle only becomes practically applicable by the use of microfluidic mixing...

  11. Nine cases of bladder cancer occurring in occupational dye users

    OpenAIRE

    村瀬, 達良; 高士, 宗久; 青田, 泰博; 下地, 敏雄; 三宅, 弘治; 三矢, 英輔

    1985-01-01

    Workers in the dye manufacturing industry have a high risk of urinary bladder cancer. There may also be a high relative risk of bladder cancer in occupational dye users. Nine occupational dye users were found to have bladder cancer. The period of engaging with dye work ranged from 5 to 40 years. Seven patients had bladder cancer and the other 2 patients had lesions both in the bladder and in the renal pelvis. Histopathology of all cases was transitional cell carcinoma. Three cases were classi...

  12. The relationship between information content of depreciation and abnormal return and future benefits in manufacturing companies in Tehran Stock Exchange(TSE

    Directory of Open Access Journals (Sweden)

    Reza Zare

    2013-01-01

    Full Text Available In present study by virtue of the importance of  the fiscal statement contents and illiquid items ignored by the merchant the depreciation contents relation with abnormal return of the shares and future benefits are examined in order to influence the items under consideration of the investors to take related decisions; 94 companies were selected from the accessible universe in five years (2006-2010 to have the data necessary for the study in order to achieve the goal. The simple and multivariable regression statistical techniques Chow and Hausman  Test were used to test the hypotheses. The significant test was conducted for the paradigms by using the ‘F’ and ‘T’ statistics. The study findings show there is no relation between the depreciation expense and abnormal return and there is a significant and positive relation between the depreciation expense and future benefits.Key Words: Abnormal return, Information Contents, depreciation, abnormal return.

  13. Environmental impact analysis of batik natural dyes using life cycle assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sari, Diana Puspita; Purwanggono, Bambang; Hermawan, Andy Tri

    2017-11-01

    The use of natural dyes for batik dyeing is fewer than synthetic dyes because of its limitations in the application such complexity in manufacture and usage. For ease of use, natural dyes need to be processed into instant products. Extract of natural dyes are generally produced in liquid form that are less practical in long-term use. Dye powder obtained by drying the liquid extract using spray dryer. Production process of liquid natural dye is simpler and require less energy but need more energy for transporting. It is important to know which type of natural dyes should be produced based on their environmental impact. This research aim to compare environmental impact between liquid and powder natural dyes and also to find relative contribution of different stage in life cycle to total environmental impact. The appropriate method to analyze and compare the environmental impacts of powder and liquid natural dyes is Life Cycle Assessment (LCA). The "cradle to grave" approach used to assess environmental impact of powder and liquid natural dyes of Jalawe rind throughout production process of natural dyes, distribution and use of natural dyes for coloring batik. Results of this research show that powder natural dyes has lower environmental impacts than liquid natural dyes. It was found that distribution, mordanting and packaging of liquid dyes have big contribution to environmental impact.

  14. ANALYSIS OF CORPORATE SOCIAL RESPONSIBILITY, DEFAULT RISK AND CONSERVATISM EFFECT TO EARNING MANAGEMENT WITH GOOD CORPORATE GOVERNANCE AS MODERATING VARIABLE IN MANUFACTURING COMPANY WHOSE SHARES INCORPORATED IN INDONESIA SHARIA STOCK INDEX

    Directory of Open Access Journals (Sweden)

    Budi Gautama Siregar

    2018-05-01

    Full Text Available The purpose of this research is to examine and analyze Good Corporate Governance in moderating the relationship between Corporate Social Responsibility (as measured by economic, environmental and social, Default Risk (as measured by debt to equity ratio and debt to assets ratio and Conservatism (as measured by earning / stock return relation, accruals and net assets Earnings Management. The sample used is a manufacturing company during the period 2011- 2015. The total sample used is 170 samples. Sampling technique used is saturated sample method. The analytical model used in this research with Structural Equation Modeling. The results showed that Corporate Social Responsibility, as measured by the economy and environment, has a positive and significant effect on earning management, while Corporate Social Responsibility measured by social have negative and significant effect to earning management. Default risk, as measured by debt to equity ratio and debt to asset ratio, has positive and significant effect on Earnings Management. Also, conservatism measured by earning / stock return relation and accrual has adverse and insignificant effect on earning management. Good Corporate Governance moderates weakening the effect of Corporate Social Responsibility as measured by economic, environmental to Earnings Management. Meanwhile, the interaction of Corporate Social Responsibility proxy by social with good corporate governance has a positive and significant effect. Good Corporate Governance moderates weakening the effect of default risk measured by debt to equity ratio on Earnings Management, while the interaction between default risk measured by debt to asset ratio with good corporate governance has positive and insignificant effect, so GCG does not moderate the effect of default risk as measured by debt to asset ratio to Earnings Management. Another result was that good Corporate governance does not moderate Conservatism effect measured by Earning

  15. Chemistry of Natural Dyes

    Indian Academy of Sciences (India)

    scientific principles, and the interaction between the dye and the dyed material is ... Dyes are classified based on their structure, source, method of application .... the right source that gives not only beautiful tones, but colourfast shades as well.

  16. Application of dye analysis in forensic fibre and textile examination: Case examples.

    Science.gov (United States)

    Schotman, Tom G; Xu, Xiaoma; Rodewijk, Nicole; van der Weerd, Jaap

    2017-09-01

    Seven cases and a quality assurance test are presented. In these cases, fibres or textiles submitted for investigation were analysed by HPLC-DAD-MS to identify the dyes present. The cases presented illustrate that it is possible to identify textile dyes in fibre traces recovered for forensic analysis. The results show that a mixture of dyes is present in all textiles investigated, except one sample that was taken from a manufacturer dye shade card. It is concluded that dye analyses improves the evidential value of forensic fibre examinations, as it becomes possible to distinguish textiles that are different in dye chemistry, but have a similar colour. In addition dye analysis makes the examination more robust, as it becomes possible to attribute colour differences between samples to identical dyes (mixed in different ratios) or to chemically different dyes. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. uv dye lasers

    International Nuclear Information System (INIS)

    Abakumov, G.A.; Fadeev, V.V.; Khokhlov, R.V.; Simonov, A.P.

    1975-01-01

    The most important property of visible dye lasers, that is, continuous wavelength tuning, stimulated the search for dyes capable to lase in uv. They were found in 1968. Now the need for tunable uv lasers for applications in spectroscopy, photochemistry, isotope separation, remote air and sea probing, etc. is clearly seen. A review of some recent advances in uv dye lasers is reviewed

  18. 75 FR 66009 - Airworthiness Directives; Cessna Aircraft Company (Type Certificate Previously Held by Columbia...

    Science.gov (United States)

    2010-10-27

    ... Company (Type Certificate Previously Held by Columbia Aircraft Manufacturing (Previously the Lancair... Company (Type Certificate Previously Held by Columbia Aircraft Manufacturing (Previously The Lancair...-15895. Applicability (c) This AD applies to the following Cessna Aircraft Company (type certificate...

  19. Investigation of hair dye deposition, hair color loss, and hair damage during multiple oxidative dyeing and shampooing cycles.

    Science.gov (United States)

    Zhang, Guojin; McMullen, Roger L; Kulcsar, Lidia

    2016-01-01

    Color fastness is a major concern for consumers and manufacturers of oxidative hair dye products. Hair dye loss results from multiple wash cycles in which the hair dye is dissolved by water and leaches from the hair shaft. In this study, we carried out a series of measurements to help us better understand the kinetics of the leaching process and pathways associated with its escape from the fiber. Hair dye leaching kinetics was measured by suspending hair in a dissolution apparatus and monitoring the dye concentration in solution (leached dye) with an ultraviolet-visible spectrophotometer. The physical state of dye deposited in hair fibers was evaluated by a reflectance light microscopy technique, based on image stacking, allowing enhanced depth of field imaging. The dye distribution within the fiber was monitored by infrared spectroscopic imaging of hair fiber cross sections. Damage to the ultrafine structure of the hair cuticle (surface, endocuticle, and cell membrane complex) and cortex (cell membrane complex) was determined in hair cross sections and on the hair fiber surface with atomic force microscopy. Using differential scanning calorimetry, we investigated how consecutive coloring and leaching processes affect the internal proteins of hair. Further, to probe the surface properties of hair we utilized contact angle measurements. This study was conducted on both pigmented and nonpigmented hair to gain insight into the influence of melanin on the hair dye deposition and leaching processes. Both types of hair were colored utilizing a commercial oxidative hair dye product based on pyrazole chemistry.

  20. Hair dye contact allergy

    DEFF Research Database (Denmark)

    Søsted, Heidi; Rastogi, Suresh Chandra; Andersen, Klaus Ejner

    2004-01-01

    Colouring of hair can cause severe allergic contact dermatitis. The most frequently reported hair dye allergens are p-phenylenediamine (PPD) and toluene-2,5-diamine, which are included in, respectively, the patch test standard series and the hairdressers series. The aim of the present study...... was to identify dye precursors and couplers in hair dyeing products causing clinical hair dye dermatitis and to compare the data with the contents of these compounds in a randomly selected set of similar products. The patient material comprised 9 cases of characteristic clinical allergic hair dye reaction, where...... exposure history and patch testing had identified a specific hair dye product as the cause of the reaction. The 9 products used by the patients were subjected to chemical analysis. 8 hair dye products contained toluene-2,5-diamine (0.18 to 0.98%). PPD (0.27%) was found in 1 product, and m-aminophenol (0...

  1. Technology for Manufacturing Efficiency

    Science.gov (United States)

    1995-01-01

    The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

  2. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  3. Scaling up manufacturing of ZnO thin layers for application in flexible dye-sensitized solar cells; Aufskalierung der Herstellung von ZnO-Duennschichten fuer die Anwendung in flexiblen farbstoffsensibilisierten Solarzellen

    Energy Technology Data Exchange (ETDEWEB)

    Bittner, Florian

    2012-10-19

    Flexible solar cells possess good future prospects for versatile mobile applications and can provide an important environmental benefit. One of the technologies permitting flexible solar cells is that of dye-sensitized solar cells. Among other advantages the fabrication of these organic-inorganic hybrid solar cells promises to be inexpensive in comparison to other technologies. Nanoparticular TiO{sub 2} is used predominantly as the semiconducting photoanode material; however its preparation route contains a tempering step at about 450 C, which impedes the use of flexible plastic substrates - at least with the method established for dye-sensitized solar cells. An alternative to TiO{sub 2} is ZnO, which can be fabricated for example in an electrochemical process at temperatures of only 70 C in the form of porous quasicrystalline layers. To create porosity the dye eosin Y is used as structure-directing agent. In the context of this study layers prepared by this method were compared to ZnO layers prepared by screen printing. This was performed on glass based substrates. Better conversion efficiency has been determined for dye-sensitized solar cells based on electrochemical deposited layers, while other results indicated advantages for the screen printed layers. As the morphologies of the available screen printed layers proved to be unfavourable and poorly comparable, a concluding statement on the suitability of the different types of layers was eventually not possible. Furthermore a technical simple and inexpensive method for the platinum coating of plastic substrates, which are used as counter electrodes, was tried to be determined. However, layers prepared by technically relatively complex sputtering exhibited by far better properties than layers prepared by electrochemical deposition or by chemical reduction of platinum salts. Thus, the targeted objective has not been reached. The central scope of this study was the development of an electrochemical deposition setup

  4. 76 FR 81979 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-12-29

    ...), the company presently manufactures a small amount of this controlled substance in bulk solely to conduct manufacturing internal process development. It is the company's intention that, when the... (1105) only, the company manufactures these controlled substances in bulk solely for distribution within...

  5. Smart Companies.

    Science.gov (United States)

    Galagan, Patricia A.

    1997-01-01

    Capturing and leveraging knowledge is an important new management trend that is as yet undefined. Some companies are accounting for their intellectual capital and applying it to the company balance sheets. (JOW)

  6. WATERLESS DYEING [REVIEW

    Directory of Open Access Journals (Sweden)

    DEVRENT Nalan

    2015-05-01

    Full Text Available The textile industry is believed to be one of the biggest consumers of water. Water consumption and exhaustion in dyeing textile materials in conventional methods is an important environmental problem. The cost of waste water treatment will cause a prominent problem in the future as it does today. Increasing consideration of ecologic consequences of industrial processes as well as legislation enforcing the avoidance of environmental problems have caused a reorientation of thinking and promoted projects for replacement of conventional technologies. One of these new technologies is dyeing in supercritical fluids. Dyeing with supercritical carbon dioxide is a favourable concept considering the value of water as a natural resource and the cost of waste water treatment. This dyeing method offers many advantages over conventional aqueous dyeing: During this dyeing process no water is used, therefore there is no waste water problem, no other chemicals are required; the carbon dioxide can be recycled; the dystuff which is not adsorbed on the substrate can be collected and reused; The necessary energy consumption in this process is relatively lower than is needed to heat water in conventional methods of dyeing. Due to unnecessary of drying process, it helps to save both energy and time; and dyeing cycle is shorter compared with traditional methods. In addition carbon dioxide is non-toxic and non-flammable. Supercritical fluid, supercritical dyeing, disperse dyestuffs, solid-fluid equilibrium

  7. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  8. Anaerobic azo dye reduction

    NARCIS (Netherlands)

    Zee, van der F.P.

    2002-01-01

    Azo dyes, aromatic moieties linked together by azo (-N=N-) chromophores, represent the largest class of dyes used in textile-processing and other industries. The release of these compounds into the environment is undesirable, not only because of their colour, but also

  9. for aqueous dye lasers

    Indian Academy of Sciences (India)

    2014-02-12

    Feb 12, 2014 ... inclusion complex of RhB with the container molecule cucurbit[7]uril (CB[7]). Keywords. Temperature-dependent fluorescence; Rhodamine B; cucurbit[7]uril; host–guest complex; dye laser. PACS Nos 36.20.kd; 83.60.pq; 87.64.kv. 1. Introduction. Rhodamine B (RhB) is an efficient and photostable laser dye ...

  10. Extraction of dye

    African Journals Online (AJOL)

    Dyes of natural origins are great for color appreciation as any variation in the concentration of dye, mordant, type of water, soil and climate give variations in ... Grey scale and blue dyed silk were used for color fastness rating. ..... Down to Earth.

  11. Social manufacturing

    OpenAIRE

    Hamalainen, Markko; Karjalainen, Jesse

    2017-01-01

    New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

  12. Tartrazine: a potentially hazardous dye in Canadian drugs.

    Science.gov (United States)

    MacCara, M. E.

    1982-01-01

    The literature was reviewed to determine the incidence of idiosyncratic reactions to tartrazine. From 4% to 14% of individuals with asthma or allergies or both and from 7% to 20% of persons who are sensitive to acetylsalicylic acid may react to this dye. The mechanism of such reactions is unknown. Pharmaceutical manufacturers and distributors were surveyed and a list was prepared of approximately 450 Canadian pharmaceuticals that contain tartrazine. The 53 pharmaceutical and manufacturers and distributors whose drug products do not contain this dye were also listed. It is recommended that information concerning the tartrazine content of drugs be included on package labels. PMID:7074487

  13. Dyes for displays

    Science.gov (United States)

    Claussen, U.

    1984-01-01

    The improvement of contrast and visibility of LCD by two different means was undertaken. The two methods are: (1) development of fluorescent dyes to increase the visibility of fluorescent activated displays (FLAD); and (2) development of dichroic dyes to increase the contrast of displays. This work was done in close cooperation with the electronic industry, where the newly synthesized dyes were tested. The targets for the chemical synthesis were selected with the help of computer model calculations. A marketable range of dyes was developed. Since the interest of the electronic industries concerning FLAD was low, the investigations were stopped. Dichroic dyes, especially black mixtures with good light fastness, order parameter, and solubility in nematic phases were developed. The application of these dyes is restricted to indoor use because of an increase of viscosity below -10 C. Applications on a technical scale, e.g., for the automotive industry, will be possible if the displays work at temperatures down to -40 C. This problem requires a complex optimization of the dye/nematic phase system.

  14. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  15. Dyeing of Polyester with Disperse Dyes: Part 2. Synthesis and Dyeing Characteristics of Some Azo Disperse Dyes for Polyester Fabrics

    Directory of Open Access Journals (Sweden)

    Alya M. Al-Etaibi

    2016-06-01

    Full Text Available The goal of this study was to utilize carrier for accelerating the rate of dyeing not only to enhance dyeing of polyester fabrics dyed with disperse dyes 3a,b, but also to save energy. Both the color strength expressed as dye uptake and the fastness properties of the dyed fabrics were evaluated.

  16. Manufacturing best practices and performance

    DEFF Research Database (Denmark)

    Szász, Levente; Demeter, Krisztina; Boer, Harry

    2014-01-01

    whether a) home and host country characteristics moderate the association between manufacturing practices and performance, and, thus, whether b) there are manufacturing practices that are universally best. Manufacturing practices and performance are measured using data collected through the fifth round...... analysis is used to develop groups of companies based on home and host country development. Exploratory factor analysis is applied to create bundles of manufacturing practices and performance measures. Then, using moderated multiple regressions (MMR) with interaction factor, and separate multiple...... regression analyses for each group of companies, bundles of manufacturing practices are identified that lead to best-in-class performance improvements. A range of control variables is introduced to help interpret the results. The study shows that home and host country context does affect the association...

  17. The manufacturing role in fuel performance

    International Nuclear Information System (INIS)

    Barr, A.P.

    1997-01-01

    Manufacturing companies have been involved in the CANDU fuel industry for more than 40 years. Early manufacturing contributions were the development of materials and processes used to fabricate the CANDU fuel bundle. As CANDU reactors were commissioned, the manufacturing contribution has been to produce economical, high quality fuel for the CANDU market. (author)

  18. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    OpenAIRE

    Syed Farman Ali Shah; Aziza Aftab; Noorullah Soomro; Mir Shah Nawaz; Kambiz Vafai

    2015-01-01

    The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO), granulated activated carbon (GAC) bed, etc. The treatment efficiency was improved by coupling c...

  19. 76 FR 21917 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2011-04-19

    ... manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol. In...

  20. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  1. Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

    CERN Document Server

    Mehnen, Jörn

    2013-01-01

    Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

  2. TIE - DYE (ADIRE) AMONG THE JUKUN PEOPLE Gausa Solomon ...

    African Journals Online (AJOL)

    SO

    clothing scraps or fibrous materials from municipal waste stream (Wikipedia, 2014). ... example fabric that has been tie-dyed can be recycled and used as lamp shades, .... Dye colour is used in the manufacture of plastic products, but their most ...

  3. Manufacturing strategies for time based competitive advantages

    OpenAIRE

    Lin, Yong; Ma, Shihua; Zhou, Li

    2012-01-01

    Purpose – The main purpose of this paper is to investigate the current manufacturing strategies and practices of bus manufacturers in China, and to propose a framework of manufacturing strategies for time-based competitive advantages.\\ud Design/methodology/approach – The conceptual research framework is devised from a review of the literature, and case studies are used to investigate the manufacturing strategies and practices in place in the case companies. Data is collected through semi-stru...

  4. Financial management for small companies

    Science.gov (United States)

    Bruce Hansen; Jeff Palmer; Jeff Palmer

    2000-01-01

    The wood-products industry is characterized by many small manufacturers that lack the staff to compile and analyze information on their operations and investments. Two computer programs, FRAN and JEFFI, have been developed by the USDA Forest Service at Princeton, West Virginia,to help small companies better analyze and monitor current performance, and better evaluate...

  5. Treatment of dyeing wastewater including reactive dyes (Reactive ...

    African Journals Online (AJOL)

    Fungal growth was not observed at pH 2. Maximum fungal decolourisation ocurred at pH 3 for anionic reactive dyes (RR, RBB, RB) and pH 6 for cationic MB dye. The fungal dye bioremoval was associated with the surface charge of the fungus due to electrostatic interactions. Growing R. arrhizus strain decolourised 100% of ...

  6. Hair cosmetics: dyes.

    Science.gov (United States)

    Guerra-Tapia, A; Gonzalez-Guerra, E

    2014-11-01

    Hair plays a significant role in body image, and its appearance can be changed relatively easily without resort to surgical procedures. Cosmetics and techniques have therefore been used to change hair appearance since time immemorial. The cosmetics industry has developed efficient products that can be used on healthy hair or act on concomitant diseases of the hair and scalp. Dyes embellish the hair by bleaching or coloring it briefly, for temporary periods of longer duration, or permanently, depending on the composition of a dye (oxidative or nonoxidative) and its degree of penetration of the hair shaft. The dermatologist's knowledge of dyes, their use, and their possible side effects (contact eczema, cancer, increased porosity, brittleness) can extend to an understanding of cosmetic resources that also treat hair and scalp conditions. Copyright © 2013 Elsevier España, S.L.U. and AEDV. All rights reserved.

  7. Logistics in Estonian business companies

    Directory of Open Access Journals (Sweden)

    A. Kiisler

    2008-12-01

    Full Text Available The article describes logistics survey in Estonia carried out in 2007 as a part of the LogOnBaltic project. The level of logistics in Estonian manufacturing, trading and logistics companies is explored through logistics costs, performance indicators, outsourcing, ICT use and logistics self-estimation of the companies responded. Responses from 186 Estonian companies were gathered through a web-based survey (38% of manufacturing, 38% of trading and 24% of logistics sector. Logistics costs as the percentage of turnover make in average 13.8% in manufacturing and 13.3% in trading. Transportation and inventory carrying cost form around 70% of overall logistics costs. Considering the logistics indicators surveyed, Estonian companies show up with relatively low perfect order fulfillment rates, short customer order fulfillment cycles and effective management of cash flows. The most widely outsourced logistics function is international transportation followed by domestic transportation, freight forwarding and reverse logistics. By 2010, the outsourcing of IT systems in logistics followed by inventory management, warehousing and product customization is expected to increase more substantially. The awareness of logistics importance is still low among Estonian companies. Only 27–44% of those agree that logistics has a considerable impact on profitability, competitive advantage, top management or customer service level.

  8. Exploring Danish Innovative Manufacturing Performance

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Christiansen, Thomas Bøhm

    2005-01-01

    The paper explores several dimensions of Danish industry’s innovative performance with respect to the paradigm of the fifth generation innovation model that was suggested by Rothwell [Int. Market. Rev. 11 (1994) 7]. These dimensions include a general status of innovativeness in Danish companies...... manufacturing companies demonstrate an innovative performance close to the fourth generation of innovation, which is slightly different than it is perceived publicly....

  9. Hair Dye and Hair Relaxers

    Science.gov (United States)

    ... For Consumers Consumer Information by Audience For Women Hair Dye and Hair Relaxers Share Tweet Linkedin Pin it More sharing ... products. If you have a bad reaction to hair dyes and relaxers, you should: Stop using the ...

  10. Dye filled security seal

    International Nuclear Information System (INIS)

    Wilson, D.C.

    1982-01-01

    A security seal for providing an indication of unauthorized access to a sealed object includes an elongate member to be entwined in the object such that access is denied unless the member is removed. The elongate member has a hollow, pressurizable chamber extending throughout its length that is filled with a permanent dye under greater than atmospheric pressure. Attempts to cut the member and weld it together are revealed when dye flows through a rupture in the chamber wall and stains the outside surface of the member

  11. Company analysis

    DEFF Research Database (Denmark)

    Jenster, Per V.; Hussey, David

    This volume looks at the company appraisal as a whole, examining the continuing need to appraise companies as part of the continuing strategy process. Building from a sound basis of theory, the text aims to be practical and to give guidance to senior managers and others involved in the strategy...... process. It is thus a book primarily aimed at managers, but should also be useful for MBA students undertaking strategy assignments It provides helpful, practical guidance and identifies weaknesses of traditional methods. It also presents a variety of tools which may be used in the appraisal process...

  12. 76 FR 5829 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-02-02

    ... bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana.... In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol as a...

  13. Measurement of sustainability index among paper manufacturing plants

    Science.gov (United States)

    Sharathkumar Reddy, V.; Jayakrishna, K.; Lal, Babu

    2017-11-01

    The paper manufacturing companies are facing challenges to implement sustainable manufacturing into their products and processes. Paper manufacturing has remarked as an intensive consumer of natural raw materials, energy and a major source of multiple pollutants. Thus, evaluating the sustainable manufacturing in these companies has become a necessity. This paper proposes a set of Performance Indicators (PIs) for evaluating the sustainable manufacturing appropriate to the paper manufacturing companies based on the triple bottom line of sustainability. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), a multi-criteria decision analysis method is applied to prioritize the performance indicators by summarizing the opinions of stakeholders. It is hoped that the proposed PIs enables and assists the paper manufacturing companies to achieve the higher performance in sustainable manufacturing and so as to increase their competitiveness.

  14. Light-induced mutagenicity in Salmonella TA102 and genotoxicity/cytotoxicity in human T-cells by 3,3'-dichlorobenzidine: a chemical used in the manufacture of dyes and pigments and in tattoo inks

    International Nuclear Information System (INIS)

    Wang Lei; Yan Jian; Hardy, William; Mosley, Charity; Wang Shuguang; Yu Hongtao

    2005-01-01

    DCB, 3,3'-dichlorobenzidine, is used primarily as an intermediate in the manufacture of diarylide yellow or azo red pigments for printing ink, textile, paint, and plastics. It is also used in tattoo inks. In this article, we investigate light-induced toxicity of DCB in both bacteria and human Jurkat T-cells. DCB itself is not toxic or mutagenic to Salmonella typhimurium TA102, but is photomutagenic at concentrations as low as 2 μM and phototoxic at concentrations >100 μM when bacteria are exposed to DCB and light at the same time (1.2 J/cm 2 of UVA and 2.1 J/cm 2 of visible light). Furthermore, DCB is both photocytotoxic and photogenotoxic to human Jurkat T-cells. Under a light irradiation dose of 2.3 J/cm 2 of UVA and 4.2 J/cm 2 of visible light, it causes the Jurkat T-cells to become nonviable in a DCB dose-dependent manner and the nonviable cells reaches 60% at DCB concentrations higher than 50 μM. At the same time, DNA fragmentation is observed for cells exposed to both DCB and light, determined by single cell gel electrophoresis (alkaline comet assay). As much as 5% (average) DNA fragmentation was observed when exposed to 200 μM DCB and light irradiation. This suggests that DCB can penetrate the cell membrane and enter the cell. Upon light activation, DCB in the cells can cause various cellular damages, leading to nonviable Jurkat T-cells. It appears, the nonviable cells are not caused solely by fragmentation of cellular DNA, but by other damages such as to proteins and cell membranes, or DNA alkylation. Therefore, persons exposed to DCB through environmental contamination or through tattoo piercing using DCB-containing inks must not only concern about its toxicity without exposing to light, but also its phototoxicity

  15. 77 FR 19718 - Manufacturer of Controlled Substances; Notice of Registration, Norac Inc.

    Science.gov (United States)

    2012-04-02

    ... Nabilone (7379) only, the company presently manufactures a small amount of this controlled substance in bulk solely to conduct manufacturing internal process development. It is the company's intention once... (1105) only, the company manufactures these controlled substances in bulk solely for domestic...

  16. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  17. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  18. Organizing for manufacturing innovation. The case of Flexible Manufacturing Systems

    DEFF Research Database (Denmark)

    Boer, Harry; Krabbendam, Koos

    1992-01-01

    addressing the manufacturing innovation process are even fewer and provide little insight into its true nature. Consequently, little is known about the effective organization of such processes. In the present article an organization model of manufacturing innovation is described, and its practicability...... the implementation of new technology effectively. This is not surprising, considering the innovative nature of this process. Although there is a host of literature on innovation, organization and (the benefits of) new technology, the literature in which these areas are linked together is scarce. Publications...... assessed using the results of seven case studies of the implementation of flexible manufacturing systems in British, Belgian and Dutch mechanical engineering companies....

  19. The implementation of Supply Chain Collaboration in China: Manufacturing Industries

    OpenAIRE

    HAN, CHE

    2011-01-01

    As we know that supply chain management is important to a manufacturing company and Chinese manufacturing companies have great contribution to the world. Unfortunately, Chinese companies still use traditional supply chain to operate, and it will not help companies to improve their performance and save costs. In this way, the topic of this dissertation is investigating one of the modern supply chain management strategies which is supply chain collaboration. In addition, the supplier developmen...

  20. 76 FR 39127 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-07-05

    ... Administration (DEA) to be registered as a bulk manufacturer of Remifentanil (9739) the basic class of controlled substance in schedule II. The company plans to utilize this facility to manufacture small quantities of the... primary manufacturing facility in West Deptford, New Jersey. The controlled substances manufactured in...

  1. 77 FR 5849 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2012-02-06

    ... (DEA) to be registered as a bulk manufacturer of Remifentanil (9739), the basic class of controlled substance in schedule II. The company plans to utilize this facility to manufacture small quantities of the... manufacturing facility in West Deptford, New Jersey. The controlled substances manufactured in bulk at this...

  2. OPTIMIZATION OF DYEING PARAMETERS TO DYE COTTON WITH CARROT EXTRACTION

    Directory of Open Access Journals (Sweden)

    MIRALLES Verónica

    2017-05-01

    Full Text Available Natural dyes derived from flora and fauna are believed to be safe because of non-toxic, non-carcinogenic and biodegradable nature. Furthermore, natural dyes do not cause pollution and waste water problems. Natural dyes as well as synthetic dyes need the optimum parameters to get a good dyeing. On some occasions, It is necessary the use of mordants to increase the affinity between cellulose fiber and natural dye, but there are other conditions to optimize in the dyeing process, like time, temperature, auxiliary porducts, etc. In addition, the optimum conditions are different depends on the type of dye and the fiber nature. The aim of this work is the use of carrot extract to dye cotton fabric by exhaustion at diverse dyeing conditions. Diffferent dyeing processes were carried out to study the effect of pH condition and the temperature, using 7, 6 and 4 pH values and 95 ºC and 130ºC for an hour. As a result some images of dyed samples are shown. Moreover, to evaluate the colour of each sample CIELAB parameters are analysed obtained by reflexion spectrophotometre. The results showed that the temperature used has an important influence on the colour of the dyed sample.

  3. Microfluidic Dye Lasers

    DEFF Research Database (Denmark)

    Kristensen, Anders; Balslev, Søren; Gersborg-Hansen, Morten

    2006-01-01

    A technology for miniaturized, polymer based lasers, suitable for integration with planar waveguides and microfluidic networks is presented. The microfluidic dye laser device consists of a microfluidic channel with an embedded optical resonator. The devices are fabricated in a thin polymer film...

  4. (MTT) dye reduction assay.

    African Journals Online (AJOL)

    to inhibit proliferation of HeLa cells was determined using the 3443- dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) dye reduction assay. Extracts from roots of Agathisanthemum bojeri, Synaptolepis kirkii and Zanha africana and the leaf extract of Physalis peruviana at a concentration of 10 pg/ml inhibited cell ...

  5. Levitated droplet dye laser

    DEFF Research Database (Denmark)

    Azzouz, H.; Alkafadiji, L.; Balslev, Søren

    2006-01-01

    a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating...

  6. Bio-degradation of synthetic textile dyes by thermophilic lignolytic fungal isolates

    Directory of Open Access Journals (Sweden)

    Nidhi Sahni

    2014-10-01

    Full Text Available Synthetic dyes are extensively used in different industries like textile dyeing, paper, printing, color, photography, pharmaceutics and cosmetics. These are generally toxic and carcinogenic in nature. If not treated, they will remain in nature for a long period of time as they are recalcitrant. Among these, azo dyes represent the largest and most versatile class of synthetic dyes. Approximately 10-15% of the dyes are released into the environment during manufacture and usage. Various methods are used for dye removal viz. physical, chemical, electrochemical and biological. Advantage of chemical, electrochemical and biological methods over physical involves the complete destruction of the dye, but chemical and electrochemical methods are found to be expensive and have operational problems. So the biological method is preferred over other methods for degradation/decolorization of dyes. In the present study, thermophilic lignolytic fungal culture was isolated from compost/soil/digested slurry/plant debris, were subjected for acclimatization to Remazol Brilliant Blue (RBB at 0.05% concentration, in the malt extract broth (MEB. The most promising fungal isolates were used for further dye degradation studies. The results suggest that the isolates T10, T14 and T17 as a useful tool for degradation of reactive dyes.

  7. Dye laser principles with applications

    CERN Document Server

    Duarte, Frank J; Liao, Peter F; Kelley, Paul

    1990-01-01

    A tutorial introduction to the field of dye lasers, Dye Laser Principles also serves as an up-to-date overview for those using dye lasers as research and industrial tools. A number of the issues discussed in this book are pertinent not only to dye lasers but also to lasers in general. Most of the chapters in the book contain problem sets that expand on the material covered in the chapter.Key Features* Dye lasers are among the most versatile and successful laser sources currently available in use Offering both pulsed and continuous-wave operation and tunable from the near ultraviole

  8. Modular manufacturing processes : Status, challenges, and opportunities

    NARCIS (Netherlands)

    Baldea, Michael; Edgar, Thomas F.; Stanley, Bill L.; Kiss, Anton A.

    2017-01-01

    Chemical companies are constantly seeking new, high-margin growth opportunities, the majority of which lie in high-grade, specialty chemicals, rather than in the bulk sector. To realize these opportunities, manufacturers are increasingly considering decentralized, flexible production facilities:

  9. The application of mechatronic design approach in a reconfigurable manufacturing environment

    CSIR Research Space (South Africa)

    Xing, B

    2010-12-01

    Full Text Available Manufacturing companies are faced with the challenge of unpredictable, high frequency market changes in both local and international markets. Two types of conventional manufacturing system: dedicated manufacturing system (DMS) and flexible...

  10. Business models for additive manufacturing

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne; Bogers, Marcel

    2015-01-01

    Digital fabrication — including additive manufacturing (AM), rapid prototyping and 3D printing — has the potential to revolutionize the way in which products are produced and delivered to the customer. Therefore, it challenges companies to reinvent their business model — describing the logic...... of creating and capturing value. In this paper, we explore the implications that AM technologies have for manufacturing systems in the new business models that they enable. In particular, we consider how a consumer goods manufacturer can organize the operations of a more open business model when moving from...... a manufacturer-centric to a consumer-centric value logic. A major shift includes a move from centralized to decentralized supply chains, where consumer goods manufacturers can implement a “hybrid” approach with a focus on localization and accessibility or develop a fully personalized model where the consumer...

  11. Characteristics of dye-sensitized solar cells using natural dye

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, Shoji, E-mail: furukawa@cse.kyutech.ac.j [Graduate School of Computer Science and Systems Engineering, Kyushu Institute of Technology, 680-4 Kawazu, Iizuka-shi, Fukuoka-ken 820-8502 (Japan); Iino, Hiroshi; Iwamoto, Tomohisa; Kukita, Koudai; Yamauchi, Shoji [Graduate School of Computer Science and Systems Engineering, Kyushu Institute of Technology, 680-4 Kawazu, Iizuka-shi, Fukuoka-ken 820-8502 (Japan)

    2009-11-30

    Dye-sensitized solar cells are expected to be used for future clean energy. Recently, most of the researchers in this field use Ruthenium complex as dye in the dye-sensitized solar cells. However, Ruthenium is a rare metal, so the cost of the Ruthenium complex is very high. In this paper, various dye-sensitized solar cells have been fabricated using natural dye, such as the dye of red-cabbage, curcumin, and red-perilla. As a result, it was found that the conversion efficiency of the solar cell fabricated using the mixture of red-cabbage and curcumin was about 0.6% (light source: halogen lamp), which was larger than that of the solar cells using one kind of dye. It was also found that the conversion efficiency was about 1.0% for the solar cell with the oxide semiconductor film fabricated using polyethylene glycol (PEG) whose molecular weight was 2,000,000 and red-cabbage dye. This indicates that the cost performance (defined by [conversion efficiency]/[cost of dye]) of the latter solar cell (dye: red-cabbage) is larger by more than 50 times than that of the solar cell using Ruthenium complex, even if the effect of the difference between the halogen lamp and the standard light source is taken into account.

  12. Manufacturing footprint optimisation: a necessity for manufacturing network in changing business environment

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2010-01-01

    Facing the unpredictable financial crisis, optimising the footprint can be the biggest and most important transformation a manufacturer can undertake. In order to realise the optimisation, fundamental understanding on manufacturing footprint is required. Different elements of manufacturing...... footprint have been investigated independently in the existing literature. In this paper, for the purpose of relationship exploration between different elements, manufacturing footprints of three industrial companies are traced historically. Based on them, four reasons for the transformation...

  13. 75 FR 28554 - Foreign-Trade Zone 50 Long Beach, California, Application for Subzone, Louisville Bedding Company...

    Science.gov (United States)

    2010-05-21

    ..., California, Application for Subzone, Louisville Bedding Company (Household Bedding Products), Ontario... status for the bedding products manufacturing facility of Louisville Bedding Company (LBC) located in... Avenue in Ontario, California. The facility is used to manufacture household bedding products, including...

  14. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  15. An Assessment of Advanced Manufacturing Technologies Implementation in Manufacturing Enterprises

    Directory of Open Access Journals (Sweden)

    Ghulam Yasin Shaikh

    2011-04-01

    Full Text Available The implementation of AMTs (Advanced Manufacturing Technologies has always been the high interest and core issue for the manufacturing enterprises to get rapid production for global market place. The developed countries have achieved its competitive advantage by implementing this unique model of technologies with full range of systems. In developing countries, the implementation of such technologies is not much common due to so many reasons, (political, social, economical and technical but entrepreneurs of growing economies are contemplating to reshape long term strategy to adopt Computer systems oriented technologies in their manufacturing companies to meet the growing needs of their indigenous market on one hand and to make a place in the international market on the other. Although, very few manufacturing organization do meet the global market requirements. But there is still lot of efforts to be taken for world class competition. An attempt has been made in this paper to develop a conceptual model taking in to account the three parameters such as, Direct, Indirect and Administrative AMTs. This research work further attempts to present an empirical data analysis conducted in the manufacturing enterprises in province of Sindh, Pakistan. The overall indigenous progress of manufacturing enterprises as according to the data collected from 60 companies reveals that the AMTs systems are partially understood and practiced that is also one of the cause towards slow progress of national exchequer.

  16. Maintenance in sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Vladimir Stuchly

    2014-09-01

    Full Text Available Background: Sustainable development is about reaching a balance between economic, social, and environmental goals, as well as people's participation in the planning process in order to gain their input and support. For a company, sustainable development means adoption of such business strategy and actions that contribute to satisfying present needs of company and stakeholders, as well as simultaneous protection, maintenance and strengthening of human and environmental potential which will be needed in the future. This new approach forces manufacturing companies to change their previous management paradigms. New management paradigm should include new issues and develop innovative methods, practices and technologies striving for solving problem of shortages of resources, softening environment overload and enabling development of environment-friendly lifecycle of products. Hence, its realization requires updating existing production models as they are based on previously accepted paradigm of unlimited resources and unlimited regeneration capabilities. Maintenance plays a crucial role because of its impact on availability, reliability, quality and life cycle cost, thus it should be one of the main pillars of new business running model.  Material and methods: The following paper is a result of research on the literature and observation of practices undertaken by a company within maintenance area. Results and conclusions: The main message is that considering sustainable manufacturing requires considerable expanding range of analysis and focusing on supporting processes. Maintenance offers numerous opportunities of decreasing influence of business processes on natural environment and more efficient resources utilization. The goal of maintenance processes realizing sustainable development strategy is increased profitability of exploitation and optimization of total lifecycle cost without disturbing safety and environmental issues. 

  17. Lean and psychosocial work environment in manufacturing

    DEFF Research Database (Denmark)

    Edwards, Kasper; Thye, Nina; Nielsen, Anders P.

    2011-01-01

    Lean is currently the rationalization method of choice in the Danish manufacturing industry. This paper reports finding from three lean implementation cases. All cases are manufacturing companies focusing on upmarket products produced in small series. Prior to lean production was organized as sel...

  18. Quality and workflow integration in flexible manufacturing

    NARCIS (Netherlands)

    ten Dam, Dennis

    2012-01-01

    In recognising the relevance of production networks and flexible manufacturing, CNC Worknet aims to be a company that approaches the new era of flexible manufacturing by developing a novel business model that combines the technologies of e-Business with production networks. This business model is

  19. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  20. Factor Affecting Textile Dye Removal Using Adsorbent From Activated Carbon: A Review

    Directory of Open Access Journals (Sweden)

    Mohammad Razi Mohd Adib

    2017-01-01

    Full Text Available Industrial company such as textile, leather, cosmetics, paper and plastic generated wastewater containing large amount of dye colour. The removal of dye materials are importance as the presence of this kind of pollutant influence the quality of water and makes it aesthetically unpleasant. As their chemical structures are complicated, it is difficult to treat dyes with municipal waste treatment operations. Even a small quantity of dye does cause high visibility and undesirability. There have been various treatment technique reviewed for the removal of dye in wastewater. However, these treatment process has made it to another expensive treatment method. This review focus on the application of adsorbent in dye removal from textile wastewater as the most economical and effective method, adsorption has become the most preferred method to remove dye. The review provides literature information about different basis materials used to produce activated carbon like agricultural waste and industrial waste as well as the operational parameters factors in term of contact time, adsorbent dosage, pH solution and initial dye concentration that will affect the process in removing textile dye. This review approach the low cost and environmental friendly adsorbent for replacing conventional activated carbon.

  1. Exploring sustainable manufacturing principles and practices

    OpenAIRE

    Alayón, Claudia

    2016-01-01

    The manufacturing industry remains a critical force in the quest for global sustainability. An increasing number of companies are modifying their operations in favor of more sustainable practices. It is hugely important that manufacturers, irrespective of the subsector they belong to, or their organizational size, implement practices that reduce or eliminate negative environmental, social and economic impacts generated by their manufacturing operations. Consequently, scholars have called for ...

  2. Participative knowledge management to empower manufacturing workers

    DEFF Research Database (Denmark)

    Campatelli, Gianni; Richter, Alexander; Stocker, Alexander

    2016-01-01

    skills. In this paper, the authors suggest a participative knowledge management approach to empower manufacturing workers. Starting from a comprehensive empirical analysis of the existing work practices in a manufacturing company, the authors have developed and validated a knowledge management system...... prototype. The prototype is aimed for training, problem solving, and facilitating the discovery, acquisition, and sharing of manufacturing knowledge. The conducted evaluation of the prototype indicates that workers' skills and level of work satisfaction will increase since the knowledge management system...

  3. COMPONENTS PROVISION MANAGEMENT FOR MACHINE BUILDING MANUFACTURER

    Directory of Open Access Journals (Sweden)

    Ekaterina P. Bochkareva

    2014-01-01

    Full Text Available In the paper is given an approach to themanagement of components provision formachine building manufacturer based uponinternational standards and best practicesof leading international companies. Thecomplex expertise methods are used forthe development of the proposed machinebuilding manufacturer suppliers’ operational management method. At a strategic level is proposed a tool for planning the suppliers’portfolio and a machine building manufacturer supplier development methodology.

  4. Detailed design of product oriented manufacturing systems

    OpenAIRE

    Silva, Sílvio Carmo; Alves, Anabela Carvalho

    2006-01-01

    This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

  5. SAFER - Company Snapshot - SAFER - Company Snapshot

    Data.gov (United States)

    Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

  6. 75 FR 9614 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2010-03-03

    ... manufacturer of the basic classes of controlled substances listed in schedule I: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk...

  7. 75 FR 64744 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2010-10-20

    ... manufacturer of the basic classes of controlled substances listed in schedule I: Drug Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk...

  8. 77 FR 5849 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2012-02-06

    ... company plans to manufacture a radioactive product to diagnose Parkinson's disease, and to manufacture a... physical security systems, verification of the company's compliance with state and local laws, and a review.... DEA has considered the factors in 21 U.S.C. 823(a) and determined that the registration of GE...

  9. New training framework for lean manufacturing – an empirical study

    OpenAIRE

    Ichimura, Maki; Arunachalam, Subramaniam; Jahankhani, Hamid

    2007-01-01

    Lean Manufacturing (LM) has been one of the centrepieces of manufacturing enterprises since Toyota has magnificently improved its manufacturing performance through implementing Toyota Production System (TPS). Moreover, it has been proven that LM is the manufacturing system that improves shop floor performances. Success stories of LM have led a large number of manufacturing companies to attempt to implement LM in order to improve their shop floor performance and retain competitiveness. However...

  10. Dye lasers in atomic spectroscopy

    International Nuclear Information System (INIS)

    Lange, W.; Luther, J.; Steudel, A.

    1974-01-01

    The properties of dye lasers which are relevant to atomic spectroscopy are discussed. Several experiments made possible by tunable dye lasers are discussed. Applications of high spectral density dye lasers are covered in areas such as absorption spectroscopy, fluorescence spectroscopy, photoionization and photodetachment, and two- and multi-photon processes. Applications which take advantage of the narrow bandwidth of tunable dye lasers are discussed, including saturation spectroscopy, fluorescence line narrowing, classic absorption and fluorescence spectroscopy, nonoptical detection of optical resonances, heterodyne spectroscopy, and nonlinear coherent resonant phenomena. (26 figures, 180 references) (U.S.)

  11. LEAN Manufacturing

    DEFF Research Database (Denmark)

    Bilberg, Arne

    . The mission with the strategy is to obtain competitive production in Denmark and in Western Europe based on the right combination of manufacturing principles, motivated and trained employees, level of automation, and cooperation with suppliers and customers worldwide. The strategy has resulted in technical...

  12. Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen, 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  13. Dye Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Di Wei

    2010-03-01

    Full Text Available Dye sensitized solar cell (DSSC is the only solar cell that can offer both the flexibility and transparency. Its efficiency is comparable to amorphous silicon solar cells but with a much lower cost. This review not only covers the fundamentals of DSSC but also the related cutting-edge research and its development for industrial applications. Most recent research topics on DSSC, for example, applications of nanostructured TiO2, ZnO electrodes, ionic liquid electrolytes, carbon nanotubes, graphene and solid state DSSC have all been included and discussed.

  14. CW organic dye laser

    International Nuclear Information System (INIS)

    Tuccio, S.A.; Peterson, O.G.

    1975-01-01

    A method and apparatus for producing continuous emission from a lasing medium comprising organic dye molecules in solution are described. Continuous emission is accomplished by flowing the medium through a focused optical cavity while simultaneously producing a population inversion in that portion of the medium flowing in close proximity to the focal point of the cavity. The population inversion is produced by pumping the medium longitudinally, along the optical axis of the cavity, preferably by the focused output of a continuous-wave argon laser. Sufficient thermal energy is continuously dissipated from the medium to maintain the optical homogeneity thereof at or above the quality required for continuous emission

  15. EH AND S ANALYSIS OF DYE-SENSITIZED PHOTOVOLTAIC SOLAR CELL PRODUCTION

    International Nuclear Information System (INIS)

    BOWERMAN, B.; FTHENAKIS, V.

    2001-01-01

    Photovoltaic solar cells based on a dye-sensitized nanocrystalline titanium dioxide photoelectrode have been researched and reported since the early 1990's. Commercial production of dye-sensitized photovoltaic solar cells has recently been reported in Australia. In this report, current manufacturing methods are described, and estimates are made of annual chemical use and emissions during production. Environmental, health and safety considerations for handling these materials are discussed. This preliminary EH and S evaluation of dye-sensitized titanium dioxide solar cells indicates that some precautions will be necessary to mitigate hazards that could result in worker exposure. Additional information required for a more complete assessment is identified

  16. Use of dyes in cariology.

    Science.gov (United States)

    van de Rijke, J W

    1991-04-01

    The property of dyes to enhance contrast by their colour can be used in clinical dentistry and in investigations in vitro or in vivo. They have been used for indication of affected dental tissues, improvement of diagnostic methods, enhancement of patient awareness and information about specific processes. The development of particular dye systems, aimed at clinical application, is often laborious because of toxic effects, lack of specificity, irreversible staining or difficulties with removal of the dye. Clinically used dyes are often visually observed, which means a qualitative assessment of the staining, while quantification of the staining, if performed at all, is confined mostly to laboratory experiments. In this paper the application of dyes, arranged according to their specific purpose in cariology, is discussed, and a brief historical overview is given of the development of two particular dye applications for which commercial dye systems are now available. If certain requirements are met, dyes can be of great help in detection and quantification when used with several diagnostic methods.

  17. NIVEL DE LA SATISFACCIÓN LABORAL DE TRABAJADORES PROFESIONALES ADMINISTRATIVOS DE UNA EMPRESA MANUFACTURERA UBICADA EN LA REGIÓN ORIENTAL DE VENEZUELA | JOB SATISFACTION LEVEL OF ADMINISTRATIVE PROFESSIONAL WORKERS AT A MANUFACTURING COMPANY LOCATED IN EASTERN VENEZUELA

    Directory of Open Access Journals (Sweden)

    Carmen Montero

    2015-11-01

    Full Text Available In this study the level of job satisfaction of workers was determined in the human resources department of a company located in eastern region of Venezuela. The fieldwork was carried out between june and july 2014. The study included 39 (out of a possible 65 administrative professionals who agreed to collaborate. A questionnaire (α = 0,832 was applied asking the most relevant unchangeable characteristics of workers, such as gender, seniority, position and formal education as well as questions that reflected the feelings of the worker-related quality of life at work. The instrument was self-administered without time control. Satisfaction at work was analyzed according to the Overall Job Satisfaction (OJS scale which includes items such as: knowledge of tasks, incentives, compensation, fellowship and interaction with the boss. The average obtained from the employee satisfaction sample was close to 80% from a maximum of 100%. It was found through the Mann-Whitney U test that gender of workers of the company does not alter the level of wellbeing, and length of service and people who manage subordinates exhibit greater degree of comfort. The profile of an employee with high job satisfaction according to this study is synthesized as a man or woman with a seven-year seniority and a supervisory job.

  18. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  19. FY 1998 annual report on the CO{sub 2} reduction by 30 manufacturing companies (plants) through energy conservation. Thailand; Seizogyo 30 sha (kojo) no sho energy ni yoru CO{sub 2} haishutsuryo sakugen 1998 nendo chosa hokokusho. Taikoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is aimed at energy-saving diagnosis of 30 energy-intensive manufacturing plants in Thailand, to draw the project plans and clarify, e.g., greenhouse effect gas reduction and cost-effectiveness effects, on the basis of transferring and applying the energy management and energy-saving equipment technologies now being used by the manufacturing sector in Japan. The 30 plants analyzed are 6 metal-related plants, 3 non-ferrous plants, 5 chemical plants, 6 ceramics plant, 4 textile plants, 4 food processing plants and 2 pulp plants. Two or more feasible energy-saving measures are studied for each plant. A total of 178 improvement measures (approximately 6 on the average for each plant) are identified as the ones related to energy-saving and operation controlling techniques. These measures could reduce CO2 emissions by 145,000 t/y from 1,370,000 t/y released from the 30 plants. The measures of high cost-effectiveness are (use of an appropriate pressure for air compressors) and (resting of transformers on non-working days). (NEDO)

  20. INTERNATIONALIZATION STRATEGIES: A CASE STUDY AT SMALL EXPORT COMPANIES

    OpenAIRE

    Elaine Di Diego Antunes; Joysinett Moraes Silva

    2009-01-01

    The purpose of this study is to identify the main internationalization strategies used by small manufacturers of hammocks. Our findings show that these export companies have up to 20 employees and their main internationalization strategy is exportation. This plan is carried out in 3 ways: indirect exportation, through trading companies; direct exportation, through sales performed in the companies and cooperative exportation, through a network of dealers in greater companies. Its was also veri...

  1. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  2. From Traditional Manufacturing towards Virtual Servi-Manufacturing: Gabriel’s Journey

    DEFF Research Database (Denmark)

    Wæhrens, Brian Vejrum; Slepniov, Dmitrij

    2011-01-01

    The case examines how Gabriel, a Danish textile company, transformed itself from being a traditional textile manufacturer to becoming an innovative virtual servi-manufacturer. The case covers the main milestones in Gabriel’s recent history, explores the main reasons for the transformation...... attempts to reconcile market requirements with its operations configurations and capabilities....

  3. Coordinating knowledge transfer within manufacturing networks

    DEFF Research Database (Denmark)

    Yang, Cheng; Johansen, John; Boer, Harry

    2008-01-01

    Along with increasing globalization, the management of international manufacturing networks is becoming increasingly important for industrial companies. This paper mainly focuses on the coordination of knowledge transfer within manufacturing networks. In this context, we propose the time......-place matrix as a tool for mapping the distribution of knowledge within manufacturing networks. Using this tool, four important questions about the coordination of knowledge transfer within a manufacturing network are identified: know-where, know-what, know-when, know-how to transfer. The relationships among...

  4. Development of the plastic solid-dye cell for tunable solid-state dye lasers and study on its optical properties

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Do Kyeong; Lee, Jong Min; Cha, Byung Heon; Yi, Jong Hoon; Lee, Kang Soo; Kim, Sung Ho; Lim, Gwon

    2000-01-01

    We have fabricated solid-state dyes with Copolex NK-55, which is the base element of plastic lens, and PMMA. We have measured the longevity of solid-state dyes doped in both polymers and found that PMMA has better properties than Coploex NK-55. We have realized the tuning range of 560-620 nm by doping rhodamine 6Gand rhodamin B in the manufactured solid-state dye laser oscillators. In the standing-wave cavity we achieved the slop efficiency of 10.8 percent and in the grazing incidence cavity, 1.2 percent. We have constructed a very compact grazing- incidence cavity which is only 6 cm long and the linewidth of the laser was less than 1.5 GHz with 3-ns pulse duration. And we have fabricated disk-type solid-state dye cell and installed it in the cavity in which the dye cell can be translated and rotated with the help of the two steeping motors. By this we could constantly changed the illuminated area of the dye cell and , therefore, were able to achieve long time operation and to use almost the entire region of the solid-state dye cell. (author)

  5. Development of the plastic solid-dye cell for tunable solid-state dye lasers and study on its optical properties

    International Nuclear Information System (INIS)

    Ko, Do Kyeong; Lee, Jong Min; Cha, Byung Heon; Yi, Jong Hoon; Lee, Kang Soo; Kim, Sung Ho; Lim, Gwon

    2000-01-01

    We have fabricated solid-state dyes with Copolex NK-55, which is the base element of plastic lens, and PMMA. We have measured the longevity of solid-state dyes doped in both polymers and found that PMMA has better properties than Coploex NK-55. We have realized the tuning range of 560-620 nm by doping rhodamine 6G and rhodamin B in the manufactured solid-state dye laser oscillators. In the standing-wave cavity we achieved the slop efficiency of 10.8 percent and in the grazing incidence cavity, 1.2 percent. We have constructed a very compact grazing- incidence cavity which is only 6 cm long and the linewidth of the laser was less than 1.5 GHz with 3-ns pulse duration. And we have fabricated disk-type solid-state dye cell and installed it in the cavity in which the dye cell can be translated and rotated with the help of the two steeping motors. By this we could constantly changed the illuminated area of the dye cell and , therefore, were able to achieve long time operation and to use almost the entire region of the solid-state dye cell. (author)

  6. Multinational Companies, Technology Spillovers, and Plant Survival

    OpenAIRE

    Holger Görg; Eric Strobl

    2003-01-01

    This paper examines the effect of the presence of multinational companies on plant survival in the host country. We postulate that multinational companies can impact positively on plant survival through technology spillovers. We study the nature of the effect of multinationals using a Cox proportional hazard model which we estimate using plant level data for Irish manufacturing industries. Our results show that the presence of multinationals has a life enhancing effect only on indigenous plan...

  7. The use of natural blueberry dye producing butter cream

    Directory of Open Access Journals (Sweden)

    G. O. Magomedov

    2016-01-01

    Full Text Available Creamy сream - finishing semi-finished product in the manufacture of pastry products. Tinting cream mass in different shades of color can improve the aesthetic appearance of the product appearance and make it more attractive. Natural blueberry anthocyanin dye has antioxidant, anti-cancer, anti-sclerotic, anti-allergic and anti-inflammatory properties, P-vitamin activity. The influence of the content of blueberry dye to change the chromaticity characteristics, organoleptic and physico-chemical parameters, shape keeping capacity, antioxidant activity of the samples of butter cream after manufacture and during storage. Based on the analysis of the results to give a butter cream pleasant pink color can be recommended dosage blueberry dye - 2.5 g / kg, with anthocyanin dye in this case is used as an antioxidant and as its use in the recommended amounts increases the antioxidant activity of 12.5 mg / 100 g (62.8% (relative to unstained samples cream. Pastry with a creamy semi-finished product, colored with natural blueberry dye, demand on the food market of confectionery products, and they can be recommended as the first baby food, people with lowered immunity, the elderly and mass consumption, as products contain vitamin E - 30 mg / 100 g of product (satisfaction of the daily requirement for vitamin makes - 75% and a significant amount of antioxidants. The facts make it possible to expand the range of competitive confectionery functionality diversify colors shades of cream, to improve its taste and aroma properties, enhance the nutritional value and shelf life due to the large amount of co-antioxidants.

  8. Attracting young talents to manufacturing

    DEFF Research Database (Denmark)

    Perini, Stefano; Oliveira, Manuel; Costa, Joao

    2014-01-01

    In the last years, despite the global economic crisis, manufacturing is facing a serious difficulty in the recruitment of the brightest high-skilled human resources. National and international institutions have provided important guidelines to combat this skills mismatch and several innovations h...... with the Experiments, Interaction with real companies, Social networks, Challenges and making real products, Career management and skills orientation, are explained in detail with the support of examples of application...

  9. Development of AVLIS dye laser system

    International Nuclear Information System (INIS)

    Sugiyama, Akira; Nakayama, Tsuyoshi; Kato, Masaaki; Arisawa, Takashi

    1995-01-01

    CVL pumped single mode dye laser was performed. It was found that pressure tuning has some excellent feature in comparison to mechanical tuning in dye laser frequency control. For evaluation of dye laser amplifier, two-dimensional rate equation was proposed. Calculated data by this equation agreed with experimental data in large diameter input dye laser beam condition. (author)

  10. Survery on Actual Conditions of Food Dyes

    OpenAIRE

    佐藤, ひろみ

    1981-01-01

    Many food dyes are widely used as food additives in Japan, and many investigations have been pointed the problems of safety of these food dyes used in Japanese food. There are two types of commercial food dyes, one is synthetic dyes and the other is natural dyes.Recently Japanese food is not stained so colourfully, but it is stained faintly in colour near to natural food by using of mixed synthetic dyes. On their hand, many consumers have a tendency to prefer natural food dyes because they ha...

  11. Lean Manufacturing Auto Cluster at Chennai

    Science.gov (United States)

    Bhaskaran, E.

    2012-10-01

    Due the presence of lot of automotive Industry, Chennai is known as Detroit of India, that producing over 40 % of the Indian vehicle and components. Lean manufacturing concepts have been widely recognized as an important tool in improving the competitiveness of industries. This is a continuous process involving everyone, starting from management to the shop floor. Automotive Component Industries (ACIs) in Ambattur Industrial Estate, Chennai has formed special purpose vehicle (SPV) society namely Ambattur Industrial Estate Manufacturers Association (AIEMA) Technology Centre (ATC) lean manufacturing cluster (ATC-LMC) during July 2010 under lean manufacturing competitiveness scheme, that comes under National Manufacturing Competitiveness Programme of Government of India. The Tripartite Agreement is taken place between National Productivity Council, consultants and cluster (ATC-LMC). The objective is to conduct diagnostic study, study on training and application of various lean manufacturing techniques and auditing in ten ACIs. The methodology adopted is collection of primary data/details from ten ACIs. In the first phase, diagnostic study is done and the areas for improvement in each of the cluster member companies are identified. In the second phase, training programs and implementation is done on 5S and other areas. In the third phase auditing is done and found that the lean manufacturing techniques implementation in ATC-LMC is sustainable and successful in every cluster companies, which will not only enhance competitiveness but also decrease cost, time and increase productivity. The technical efficiency of LMC companies also increases significantly.

  12. LCA for assessing the environmental performance of a company with the environmental management system ISO 14000

    International Nuclear Information System (INIS)

    Rigamonti, L.; Perotto, E.

    2008-01-01

    The environmental management system is an ordered pattern to treat and manage environmental issues and to improve the environmental performance of companies. It is proposed an example of application of LCA to a manufacturing company with ISO 14000. [it

  13. Dye-Sensitized Approaches to Photovoltaics

    Science.gov (United States)

    Grätzel, Michael

    2008-03-01

    . However a TCO on glass or polymer counterelectrode is widely used. In either case suitable electrocatalytic behavior is required and frequently a nanodispersed Pt precipitated from haxachloride solution is employed. It is by now evident that the achievement of an industrially-competitive sensitized photoelectrochemical solar cell is the result of the optimization of several components, associated obviously with their effective synergy. Each change of a single component has repercussions on the choice and performance of others. However as already mentioned an efficiency of over 11% has now been certified, and a stability of over 14,000 hours under accelerated testing with continuous simulated AM1.5 illumination was recently reported. In consequence there is increasing confidence on the part of industry. Several licensees of EPFL patents on dye---sensitized photovoltaic systems are now preparing for large-scale production. G24 Innovations PLC in Wales is commissioning a manufacturing plant, and Dyesol PLC in Australia is making available the required materials on an industrial scale. In conclusion, then, it can be stated that the DSC system is much more than a fascinating scientific artifact illustrating charge-transfer mechanisms at electrochemical interfaces; an efficiency and reliability with industrial credibility have been demonstrated and verified, and a significant role in competition with other photosystems can be foreseen.

  14. Manufacturing halal in Malaysia

    DEFF Research Database (Denmark)

    Fischer, Johan

    2016-01-01

    In Arabic, halal literally means ‘permissible’ or ‘lawful’. Halal is no longer an expression of an esoteric form of production, trade and consumption, but part of a huge and expanding globalized market in which certification, standards and technoscience play important roles. Over the past three...... production, trade and consumption. Based on fieldwork in Malaysia, this article explores how manufacturing companies understand and practise halal certification, standards and technoscience. I argue that while existing studies of halal overwhelmingly explore micro-social aspects such as the everyday...... consumption among Muslim groups, ‘the bigger institutional picture’ that frames such consumption production and regulation are not well understood. By studying halal production, I provide an ethnography of the overlapping technologies and techniques of production and regulation that together warrant a product...

  15. Manufacturing Vision Development – Process and Dialogue

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra

    This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research invo...... involve case studies of three companies that are part of the MCD-process. The cases primarily are focusing on the process and the dialogue dur¬ing the manufacturing vision development.......This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research...

  16. Dynamic Roles and Locations of Manufacturing

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Johansen, John

    2014-01-01

    Purpose – The principal objective of this paper is to relate functional nodes of production and innovation in global operations networks. The authors aim to capture the implications of changing strategic roles and locations of manufacturing for innovation capabilities. Design...... companies presented in this paper, the authors find that although the potential benefits of global dispersion of manufacturing are vast, the realisation of these potentials depends on how successful companies are with linking the new strategic roles and locations of manufacturing with innovation...... of global dispersion of operations. The findings assist global companies in organising cross-functional coordination and interrelated functional nodes of production and innovation in global operations networks. Originality/value – Not only routine transactional tasks but also more knowledge...

  17. Ohio Advanced Energy Manufacturing Center

    Energy Technology Data Exchange (ETDEWEB)

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote

  18. Energy Efficiency in Manufacturing Systems

    CERN Document Server

    Thiede, Sebastian

    2012-01-01

    Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require  balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

  19. Brazilwood, sappanwood, brazilin and the red dye brazilein: from textile dyeing and folk medicine to biological staining and musical instruments.

    Science.gov (United States)

    Dapson, R W; Bain, C L

    2015-01-01

    Brazilin is a nearly colorless dye precursor obtained from the heartwood of several species of trees including brazilwood from Brazil, sappanwood from Asia and the Pacific islands, and to a minor extent from two other species in Central America, northern South America and the Caribbean islands. Its use as a dyeing agent and medicinal in Asia was recorded in the 2(nd) century BC, but was little known in Europe until the 12(th) century AD. Asian supplies were replaced in the 16(th) century AD after the Portuguese discovered vast quantities of trees in what is now Brazil. Overexploitation decimated the brazilwood population to the extent that it never fully recovered. Extensive environmental efforts currently are underway to re-create a viable, sustainable population. Brazilin is structurally similar to the better known hematoxylin, thus is readily oxidized to a colored dye, brazilein, which behaves like hematein. Attachment of the dye to fabric is by hydrogen bonding or in conjunction with certain metallic mordants by coordinative bonding. For histology, most staining procedures involve aluminum (brazalum) for staining nuclei. In addition to textile dyeing and histological staining, brazilin and brazilein have been and still are used extensively in Asian folk medicine to treat a wide variety of disorders. Recent pharmacological studies for the most part have established a scientific basis for these uses and in many cases have elucidated the biochemical pathways involved. The principal use of brazilwood today is for the manufacture of bows for violins and other stringed musical instruments. The dye and other physical properties of the wood combine to produce bows of unsurpassed tonal quality.

  20. Hair Dyes and Cancer Risk

    Science.gov (United States)

    ... http://www.fda.gov/aboutfda/centersoffices/officeoffoods/cfsan/default.htm . Selected References Huncharek M, Kupelnick B. Personal use of hair dyes and the risk of bladder cancer: results of a meta-analysis. ...

  1. Advanced manufacturing: Technology and international competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-02-01

    Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

  2. Ultrasound for low temperature dyeing of wool with acid dye.

    Science.gov (United States)

    Ferrero, F; Periolatto, M

    2012-05-01

    The possibility of reducing the temperature of conventional wool dyeing with an acid levelling dye using ultrasound was studied in order to reach exhaustion values comparable to those obtained with the standard procedure at 98 °C, obtaining dyed samples of good quality. The aim was to develop a laboratory method that could be transferred at industrial level, reducing both the energy consumption and fiber damage caused by the prolonged exposure to high temperature without the use of polluting auxiliary agents. Dyeings of wool fabrics were carried out in the temperature range between 60 °C and 80 °C using either mechanical or ultrasound agitation of the bath and coupling the two methods to compare the results. For each dyeing, the exhaustion curves of the dye bath were determined and the better results of dyeing kinetics were obtained with ultrasound coupled with mechanical stirring. Hence the corresponding half dyeing times, absorption rate constants according to Cegarra-Puente modified equation and ultrasonic efficiency were calculated in comparison with mechanical stirring alone. In the presence of ultrasound the absorption rate constants increased by at least 50%, at each temperature, confirming the synergic effect of sonication on the dyeing kinetics. Moreover the apparent activation energies were also evaluated and the positive effect of ultrasound was ascribed to the pre-exponential factor of the Arrhenius equation. It was also shown that the effect of ultrasound at 60 °C was just on the dye bath, practically unaffecting the wool fiber surface, as confirmed by the results of SEM analysis. Finally, fastness tests to rubbing and domestic laundering yielded good values for samples dyed in ultrasound assisted process even at the lower temperature. These results suggest the possibility, thanks to the use of ultrasound, to obtain a well equalized dyeing on wool working yet at 60°C, a temperature process strongly lower than 98°C, currently used in industry

  3. SAFER - Company Snapshot

    Data.gov (United States)

    Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

  4. Advances in solid dosage form manufacturing technology.

    Science.gov (United States)

    Andrews, Gavin P

    2007-12-15

    Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

  5. Bio-Manufacturing to market pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Dressen, Tiffaney [Univ. of California, Berkeley, CA (United States)

    2017-09-25

    The Bio-Manufacturing to Market pilot project was a part of the AMJIAC, the Advanced Manufacturing Jobs and Innovation Accelerator Challenge grant. This internship program set out to further define and enhance the talent pipeline from the University and local Community Colleges to startup culture in East Bay Area, provide undergraduate STEM students with opportunities outside academia, and provide startup companies with much needed talent. Over the 4 year period of performance, the Bio-Manufacturing to Market internship program sponsored 75 undergraduate STEM students who were able to spend anywhere from one to six semesters working with local Bay Area startup companies and DOE sponsored facilities/programs in the biotech, bio-manufacturing, and biomedical device fields.

  6. Designing Collaborative Manufacturing Solutions for SMEs

    DEFF Research Database (Denmark)

    Radziwon, Agnieszka; Bogers, Marcel; Bilberg, Arne

    2014-01-01

    specifically examine how these SMEs collaborate with both competitors and complementors in an innovative automation project. The findings include a decreasing importance of monetary motivation, a direct competitors paradox, and leadership and ownership's issues, on both inter- and intra-company level.......In this paper, we investigate how small manufacturing companies can apply open innovation in the context of process innovation. We present a case study, with embedded action research elements, of a particular set of SMEs that implement a collaborative solution for manufacturing processes. We...

  7. Production and Logistics Performance of Czech and Slovak Companies

    Directory of Open Access Journals (Sweden)

    Polakova Veronika

    2013-03-01

    Full Text Available This contribution deals with the issues of production and logistics performance of Czech and Slovak companies. The goal of the research was to analyze logistic processes, methods of industrial engineering, methods and evaluation of manufacturing, software tools utilized for measurement and management of performance, which are currently applied in manufacturing companies in the Czech and Slovak Republic. This analysis was done with the utilization of qualitativeresearch conducted in 80 selected manufacturing companies in 2009. The results are compared in the continuity with the conclusions from previous researches on manufacturing and logistic factors of the competitiveness of Czech industrial manufacturers carried out during the period 2000-2001 in the framework of the research project of the Faculty of Economics and Management completed in 2004.

  8. American Laundry Digest Buyer's Guide. Manufacturers directory.

    Science.gov (United States)

    1991-06-15

    The following is the annual American Laundry Digest Buyer's Guide which is being circulated to all segments of the laundry industry. The Guide contains a list of manufacturers who responded to our questionnaire. This is followed by a list of product categories and the various manufacturers who make these products. You may contact these companies directly or by using the reader service card in this issue.

  9. Integrated computer aided design simulation and manufacture

    OpenAIRE

    Diko, Faek

    1989-01-01

    Computer Aided Design (CAD) and Computer Aided Manufacture (CAM) have been investigated and developed since twenty years as standalone systems. A large number of very powerful but independent packages have been developed for Computer Aided Design,Aanlysis and Manufacture. However, in most cases these packages have poor facility for communicating with other packages. Recently attempts have been made to develop integrated CAD/CAM systems and many software companies a...

  10. 21ST Century Manufacturing Enterprise Strategy Report

    Science.gov (United States)

    1992-01-01

    Association for Manufacturing Excellence, Wheeling, Illinois, 28 p. 142. Hamel, G.; Prahalad , C.K. (1989): " Strategic Intent ". Harvard Business...counsel of over 150 people from 77 companies and I1I professional organizations in developing their strategic enterprise plan. The group strongly...Understand the strategic implications of manufacturing technology for the corporation (4) Have a vision of the future competitiveness needs of industry in

  11. 78 FR 23959 - Manufacturer of Controlled Substances; Notice of Registration; PCAS-Nanosyn, LLC

    Science.gov (United States)

    2013-04-23

    ... request of the company's customers, it manufactures derivatives of controlled substances in bulk form only... compliance with state and local laws, and a review of the company's background and history. Therefore...

  12. 77 FR 31390 - Manufacturer of Controlled Substances; Notice of Registration; Pcas-Nanosyn, LLC

    Science.gov (United States)

    2012-05-25

    ... request of the company's customers, it manufactures derivatives of controlled substances in bulk form only... compliance with state and local laws, and a review of the company's background and history. Therefore...

  13. The effectiveness of manufacturing practices in different subsidiary types – consequences for CEE subsidiaries

    DEFF Research Database (Denmark)

    Demeter, Krisztina; Szász, Levente; Boer, Harry

    In the last decades several companies have become manufacturing networks of plants, operating usually in an international context. These plants can serve different purposes and have different levels of competences. This diversity influences the use and effectiveness of different manufacturing...

  14. Natural dyes as photosensitizers for dye-sensitized solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Hao, Sancun; Wu, Jihuai; Huang, Yunfang; Lin, Jianming [Institute of Materials Physical Chemistry, Huaqiao University, Quanzhou, Fujian 362021 (China)

    2006-02-15

    The dye-sensitized solar cells (DSC) were assembled by using natural dyes extracted from black rice, capsicum, erythrina variegata flower, rosa xanthina, and kelp as sensitizers. The I{sub SC} from 1.142mA to 0.225mA, the V{sub OC} from 0.551V to 0.412V, the fill factor from 0.52 to 0.63, and P{sub max} from 58{mu}W to 327{mu}W were obtained from the DSC sensitized with natural dye extracts. In the extracts of natural fruit, leaves and flower chosen, the black rice extract performed the best photosensitized effect, which was due to the better interaction between the carbonyl and hydroxyl groups of anthocyanin molecule on black rice extract and the surface of TiO{sub 2} porous film. The blue-shift of absorption wavelength of the black rice extract in ethanol solution on TiO{sub 2} film and the blue-shift phenomenon from absorption spectrum to photoaction spectrum of DSC sensitized with black rice extract are discussed in the paper. Because of the simple preparation technique, widely available and low cheap cost natural dye as an alternative sensitizer for dye-sensitized solar cell is promising. (author)

  15. 78 FR 32459 - Manufacturer of Controlled Substances; Notice of Registration; Mallinckrodt, LLC.

    Science.gov (United States)

    2013-05-30

    ... plans to manufacture the listed controlled substances for internal use and for sale to other companies... ensure that the company's registration is consistent with the public interest. The investigation has included inspection and testing of the company's physical security systems, verification of the company's...

  16. Manufactured volvulus.

    Science.gov (United States)

    Zweifel, Noemi; Meuli, Martin; Subotic, Ulrike; Moehrlen, Ueli; Mazzone, Luca; Arlettaz, Romaine

    2013-06-01

    Malrotation with a common mesentery is the classical pathology allowing midgut volvulus to occur. There are only a few reports of small bowel volvulus without malrotation or other pathology triggering volvulation. We describe three cases of small bowel volvulus in very premature newborns with a perfectly normal intra-abdominal anatomy and focus on the question, what might have set off volvulation. In 2005 to 2008, three patients developed small bowel volvulus without any underlying pathology. Retrospective patient chart review was performed with special focus on clinical presentation, preoperative management, intraoperative findings, and potential causative explanations. Mean follow-up period was 46 months. All patients were born between 27 and 31 weeks (mean 28 weeks) with a birth weight between 800 and 1,000 g (mean 887 g). They presented with an almost identical pattern of symptoms including sudden abdominal distension, abdominal tenderness, erythema of the abdominal wall, high gastric residuals, and radiographic signs of ileus. All of them were treated with intensive abdominal massage or pelvic rotation to improve bowel movement before becoming symptomatic. Properistaltic maneuvers including abdominal massage and pelvic rotation may cause what we term a "manufactured" volvulus in very premature newborns. Thus, this practice was stopped. Georg Thieme Verlag KG Stuttgart · New York.

  17. 77 FR 47114 - Manufacturer of Controlled Substances; Notice of Application; AMRI Rensselaer, Inc.

    Science.gov (United States)

    2012-08-07

    ... Marihuana (7360) I Tetrahydrocannabinols (7370) I Amphetamine (1100) II Lisdexamfetamine (1205) II... (Marihuana), the company plans to bulk manufacture cannabidiol as a synthetic intermediate, which will be...

  18. Literature Review on Dynamic Cellular Manufacturing System

    Science.gov (United States)

    Nouri Houshyar, A.; Leman, Z.; Pakzad Moghadam, H.; Ariffin, M. K. A. M.; Ismail, N.; Iranmanesh, H.

    2014-06-01

    In previous decades, manufacturers faced a lot of challenges because of globalization and high competition in markets. These problems arise from shortening product life cycle, rapid variation in demand of products, and also rapid changes in manufcaturing technologies. Nowadays most manufacturing companies expend considerable attention for improving flexibility and responsiveness in order to overcome these kinds of problems and also meet customer's needs. By considering the trend toward the shorter product life cycle, the manufacturing environment is towards manufacturing a wide variety of parts in small batches [1]. One of the major techniques which are applied for improving manufacturing competitiveness is Cellular Manufacturing System (CMS). CMS is type of manufacturing system which tries to combine flexibility of job shop and also productivity of flow shop. In addition, Dynamic cellular manufacturing system which considers different time periods for the manufacturing system becomes an important topic and attracts a lot of attention to itself. Therefore, this paper made attempt to have a brief review on this issue and focused on all published paper on this subject. Although, this topic gains a lot of attention to itself during these years, none of previous researchers focused on reviewing the literature of that which can be helpful and useful for other researchers who intend to do the research on this topic. Therefore, this paper is the first study which has focused and reviewed the literature of dynamic cellular manufacturing system.

  19. The roles of communication process for an effective lean manufacturing implementation

    OpenAIRE

    Puvanasvaran, Perumal; Megat, Hamdan; Hong, Tang Sai; Razali, Muhamad Mohd.

    2009-01-01

    Many companies are implementing lean manufacturing concept in order to remain competitive and sustainable, however, not many of them are successful in the process due to various reasons. Communication is an important aspect of lean process in order to successfully implement lean manufacturing. This paper determines the roles of communication process in ensuring a successful implementation of leanness in manufacturing companies. All the information of lean manufacturing practice...

  20. Increasing competitiveness of service companies: developing conceptual models for implementing Lean Management in service companies

    OpenAIRE

    Damrath, Felix

    2012-01-01

    Lean management is a philosophy focused on identifying and eliminating waste throughout a product’s entire value stream. It originates from the manufacturing system of Japanese automotive manufacturer Toyota and attracted due to its tremendous success widespread attention worldwide. Lean promises significant benefits in terms of waste reduction, and increased organizational and supply chain communication and integration.Generally, in terms of operations and improvements service companies are ...

  1. Experimental elaboration and analysis of dye-sensitized TiO2 solar cells (DSSC) dyed by natural dyes and conductive polymers

    Science.gov (United States)

    KałuŻyński, P.; Maciak, E.; Herzog, T.; Wójcik, M.

    2016-09-01

    In this paper we propose low cost and easy in development fully working dye-sensitized solar cell module made with use of a different sensitizing dyes (various anthocyanins and P3HT) for increasing the absorption spectrum, transparent conducting substrates (vaccum spattered chromium and gold), nanometer sized TiO2 film, iodide and methyl viologen dichloride based electrolyte, and a counter electrode (vaccum spattered platinum or carbon). Moreover, some of the different technologies and optimization manufacturing processes were elaborated for energy efficiency increase and were presented in this paper.

  2. MERGER ACCOUTING FOR COMPANIES

    OpenAIRE

    SUCIU GHEORGHE

    2014-01-01

    Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies) or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and mu...

  3. Labour flexibility in China's companies: An Empirical Study

    NARCIS (Netherlands)

    Y. Chen (Yongping)

    2001-01-01

    textabstractLabour flexibility in China???s Companies: An Empirical Study explores labour flexibility at the workplace in ten manufacturing companies in China. It addresses how HRM contributes and facilitates management in coping with increasing market competition. Flexible labour practices are

  4. The impact of fit manufacturing on green manufacturing: A review

    Science.gov (United States)

    Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

    2017-09-01

    Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

  5. Plant Evolution: A Manufacturing Network Perspective

    DEFF Research Database (Denmark)

    Yang, Cheng; Johansen, John; Boer, Harry

    2009-01-01

    Viewing them as portfolios of products and processes, we aim to address how plants evolve in the context of a manufacturing network and how the evolution of one plant impacts other plants in the same manufacturing network. Based on discussions of ten plants from three Danish companies, we identify...... two different trajectories. Together, these trajectories determine the evolution of a manufacturing network. Factors appearing to affect the two trajectories include competencies built up, transferred or acquired locally, market potential, performance considerations, local, situational factors...

  6. PERSPECTIVES FOR FOG COMPUTING IN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Jakub PIZOŃ

    2016-09-01

    Full Text Available This article discusses ongoing efforts to enable the fog computing vision in manufacturing. As a new paradigm of computing implementation of fog computing faces many challenges that open perspective of new applications within a field of manufacturing. It is expected that fog computing will be one of factors that will accelerate development of in forth industrial revolution. In this article we discuss the perspectives of manufacturing companies surrounded by new solutions of CPS, CPPS and CM in relation to fog computing.

  7. Redesigning Manufacturing Footprint from Dynamic Perspective

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2009-01-01

    footprint to address the constantly emerging new challenges by giving a holistic approach from dynamic perspective. Three Danish companies are presented. The way they developed their international manufacturing networks is analysed historically, and their redesigning of manufacturing footprint is expressed...... as how to re-assign portfolios of products and processes between specific plants within the same manufacturing network at one point in time. The strategic factors that have impact on such decisions are discussed and classified into two groups. Last, a holistic framework and a process model is presented...

  8. 76 FR 62449 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-10-07

    ...), this is notice that on May 4, 2011, Cambrex Charles City, Inc., 1205 11th Street, Charles City, Iowa... Concentrate of Poppy Straw (9670) II Sufentanil (9740) II Fentanyl (9801) II The company will manufacture the...

  9. Exploring the evolution of investment pattern on advanced manufacturing technology

    DEFF Research Database (Denmark)

    Yang, Cheng; Matthiesen, Rikke Vestergaard; Johansen, John

    2014-01-01

    This paper explores the evolution of investment pattern on advanced manufacturing technology in a manner that builds on a longitudinal perspective. Based on the data of investments in AMTs from 567 manufacturing companies this paper develops a longitudinal taxonomy defined by the evolution of inv...... of technology management, which is comprised primarily of cross-sectional studies that do not address the dynamic nature of investments in AMTs.......This paper explores the evolution of investment pattern on advanced manufacturing technology in a manner that builds on a longitudinal perspective. Based on the data of investments in AMTs from 567 manufacturing companies this paper develops a longitudinal taxonomy defined by the evolution...... of investment patterns on AMT followed by companies over time; identifies the possible evolutionary features of different groups of companies; and suggests the possible explanatory and outcome factors on the evolution of investment pattern on AMTs. By doing so, this study seeks to fill a void in the area...

  10. 76 FR 51401 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-08-18

    ... a bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana... ingredients (APIs) for distribution to its customers. In reference to drug code 7360 (Marihuana), the company...

  11. Marketing Analysis of a chosen Company

    OpenAIRE

    Slabá, Michaela

    2013-01-01

    The topic of this bachelor thesis is a proposal for improvement current situation in the company, which is engaged in manufacturing machinery for the food industry. The theoretical part includes the definition of market of organizations, marketing environment, marketing mix and marketing situation analysis. The practical part describes the company NATE - Marketing, Inc. and marketing mix of the company. The thesis also includes a proposal to improve current situation based on an analysis of t...

  12. CUSTOMER RELATIONSHIP MANAGEMENT : case study Coca-Cola Company

    OpenAIRE

    Ling, Xiaojing

    2017-01-01

    The Coca-Cola Company is an American multinational beverage corporation, a manufacturer, retailer and marketer of non-alcoholic beverage concentrates and syrups with its headquarter in Atlanta, Georgia. This thesis is aimed to affirm the superiority of the Coca-Cola Company and to find out its shortcomings in managing customer relationships based on studying the customer relationship management strategy for Coca-Cola Company and discussing the comparison between Coca-Cola and Pepsi Cola, then...

  13. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  14. Lean Application to Manufacturing Ramp-Up

    DEFF Research Database (Denmark)

    Christensen, Irene; Rymaszewska, Anna

    2016-01-01

    . Abstracting from the extant literature, the authors considered the competitiveness of manufacturing companies from two principal perspectives: the leanness of the ramp-up process and the new-value creation of quality managers. While much of the literature fails to acknowledge that the roots of lean actually......This article provides a theoretical overview of the concepts of lean and manufacturing ramp-up in an attempt to conceptualize the strategic areas in which lean philosophy and principles can be applied for continuous improvements. The application of lean principles during the final stage of a new...... product development process, that is, the ramp-up process, is a critical, early enabler of lean manufacturing. The manufacturing strategy literature conceptualizes a state of “leanness in operations,” which can consolidate both the concepts of lean and manufacturing ramp-up, providing a dual perspective...

  15. Feasibility of solar-pumped dye lasers

    Science.gov (United States)

    Lee, Ja H.; Kim, Kyung C.; Kim, Kyong H.

    1987-01-01

    Dye laser gains were measured at various pump-beam irradiances on a dye cell in order to evaluate the feasibility of solar pumping. Rhodamine 6G dye was considered as a candidate for the solar-pumped laser because of its high utilization of the solar spectrum and high quantum efficiency. Measurements show that a solar concentration of 20,000 is required to reach the threshold of the dye.

  16. World class manufacturing in metallurgical enterprise

    OpenAIRE

    B. Gajdzik

    2013-01-01

    World Class Manufacturing (WCM) assumes increase of efficiency of the company by elimination of all the losses, wastage and dangers of safety. In ArcelorMittal the concept of WCM is implemented in particular enterprises within the capital group. In this publication the activities conducted in some of those enterprises are described.

  17. World class manufacturing in metallurgical enterprise

    Directory of Open Access Journals (Sweden)

    B. Gajdzik

    2013-01-01

    Full Text Available World Class Manufacturing (WCM assumes increase of efficiency of the company by elimination of all the losses, wastage and dangers of safety. In ArcelorMittal the concept of WCM is implemented in particular enterprises within the capital group. In this publication the activities conducted in some of those enterprises are described.

  18. Natural dyes versus lysochrome dyes in cheiloscopy: A comparative evaluation.

    Science.gov (United States)

    Singh, Narendra Nath; Brave, V R; Khanna, Shally

    2010-01-01

    Cheiloscopy is the study of lip prints. Lip prints are genotypically determined and are unique, and stable. At the site of crime, lip prints can be either visible or latent. To develop lip prints for study purpose various chemicals such as lysochrome dyes, fluorescent dyes, etc. are available which are very expensive. Vermilion (Sindoor used by married Indian women) and indigo dye (fabric whitener) are readily available, naturally derived, and cost-effective reagents available in India. To compare the efficacy of sudan black, vermilion, and indigo in developing visible and latent lip prints made on bone china cup, satin fabric, and cotton fabric. Out of 45 Volunteers 15 lip prints were made on bone China cup 15 lip prints on Satin fabric and 15 on Cotton fabric. Sudan black, vermilion and indigo were applied on visible and latent lip prints and graded as good (+,+), fair (+), and poor (-) and statistically evaluated. The vermilion and indigo dye gives comparable results to that of sudan black for developing visible and latent lip prints.

  19. Effect of dye structure and redox mediators on anaerobic azo and anthraquinone dye reduction

    Directory of Open Access Journals (Sweden)

    Mayara Carantino Costa

    2012-01-01

    Full Text Available We investigated the biological decolourisation of dyes with different molecular structures. The kinetic constant values (k1 achieved with azo dye Reactive Red 120 were 7.6 and 10.1 times higher in the presence of RM (redox mediators AQDS and riboflavin, respectively, than the assays lacking RM. The kinetic constant achieved with the azo dye Congo Red was 42 times higher than that obtained with the anthraquinone dye Reactive Blue 4. The effect of RM on dye reduction was more evident for azo dyes resistant to reductive processes, and ineffective for anthraquinone dyes because of the structural stability of the latter.

  20. 企业增长状态的三维测度及其财务后果来自中国制造业上市公司实证证据%Three-dimensional Evaluation and Financial Effect of Enterprise's Growth Status:Empirical Evidence Based on China Listed Companies in Manufacturing Industry

    Institute of Scientific and Technical Information of China (English)

    周浪波; 关键

    2014-01-01

    从增长同步性、增长稳健性和增长稳定性三个维度测度企业增长状态,并以我国制造业上市公司2010~2012年财务数据为样本,考察了企业增长状态的财务后果。研究发现,增长同步性、增长稳定性均显著提高了公司盈利能力并降低了财务风险,而实际增长率与可持续增长率的偏离度与盈利能力显著负相关,与财务风险显著正相关。%Based on the financial data of China listed companies in manufacturing industry from 2010 to 2012,this study analyzed the financial effect of the corporate growth,including the profitability and financial risks,through the evaluation of growth synchronicity,growth robust-ness and growth stability.It found that the growth synchronicity and growth robustness both significantly improved the corporate profitability and reduced the financial risk.Moreover,the deviations of real growth rate and sustainable growth rate were significantly negatively correlated with the corporate profitability,but positively correlated with the financial risks.

  1. Environmental practices of the auxiliary companies to the Spanish automobile industry

    Science.gov (United States)

    González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

    2005-11-01

    The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

  2. 75 FR 24572 - Foreign-Trade Zone 29 - Louisville, Kentucky, Application for Subzone, Louisville Bedding Company...

    Science.gov (United States)

    2010-05-05

    ... - Louisville, Kentucky, Application for Subzone, Louisville Bedding Company (Household Bedding Products...-purpose subzone status for the bedding products manufacturing facilities of Louisville Bedding Company... facilities are used to manufacture household bedding products, including mattress pads and pillows (up to 10...

  3. Quirks of dye nomenclature. 1. Evans blue.

    Science.gov (United States)

    Cooksey, C J

    2014-02-01

    The history, origin, identity, chemistry and use of Evans blue dye are described along with the first application to staining by Herbert McLean Evans in 1914. In the 1930s, the dye was marketed under the name, Evans blue dye, which was profoundly more acceptable than the ponderous chemical name.

  4. Photovoltaic industry manufacturing technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

    1998-08-01

    This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

  5. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  6. Piper Ornatum and Piper Betle as Organic Dyes for TiO2 and SnO2 Dye Sensitized Solar Cells

    Science.gov (United States)

    Hayat, Azwar; Putra, A. Erwin E.; Amaliyah, Novriany; Hayase, Shuzi; Pandey, Shyam. S.

    2018-03-01

    Dye sensitized solar cell (DSSC) mimics the principle of natural photosynthesis are now currently investigated due to low manufacturing cost as compared to silicon based solar cells. In this report, we utilized Piper ornatum (PO) and Piper betle (PB) as sensitizer to fabricate low cost DSSCs. We compared the photovoltaic performance of both sensitizers with Titanium dioxide (TiO2) and Tin dioxide (SnO2) semiconductors. The results show that PO and PB dyes have higher Short circuit current (Jsc) when applied in SnO2 compared to standard TiO2 photo-anode film even though the Open circuit voltage (Voc) was hampered on SnO2 device. In conclusion, from the result, higher electron injections can be achieved by choosing appropriate semiconductors with band gap that match with dyes energy level as one of strategy for further low cost solar cell.

  7. 75 FR 42432 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

    Science.gov (United States)

    2010-07-21

    ... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... abandonment of facilities by Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... resources, fisheries, and wetlands; Cultural resources; Vegetation and wildlife; Endangered and threatened...

  8. Implementation of Lean Manufacturing in Romanian Organisations

    Directory of Open Access Journals (Sweden)

    Ucenic Camelia Ioana

    2017-01-01

    Full Text Available The implementation of lean manufacturing is one of the main tools for attaining a higher performance level in the Romanian organisations. The study uses data collected at middle management level from organisations located in Transylvania. The organisations come from different fields of activity and are in different stages of lean implementation. The article makes use of quantitative and qualitative instruments for the evaluation of lean in the above mentioned companies. Characteristics as waste reduction, cost, quality, product design have different approaches in the companies. Their way of approach gives useful information regarding the type of company from the point of view of lean manufacturing implementation. This knowledge provides a useful support at different managerial levels in the process of decision making.

  9. Manufacturing Outsourcing A Knowledge Perspective

    CERN Document Server

    Rolstadås, Asbjørn; O'Sullivan, David

    2012-01-01

    All companies which reach a critical size are faced with outsourcing decisions that can increase the value of their products and services primarily through lower costs, greater reliability and improved efficiency. Successful outsourcing decisions have an important knowledge dimension, where the outsourcing professionals need to be supported by historical and contextual knowledge regarding their own products performance but also the performance of suppliers. Outsourcing in Manufacturing: the Knowledge Dimension explains in detail how a manager can acquire, create, transfer and use knowledge that optimizes their outsourcing decisions and improves the changes of marketplace success.              Outsourcing in Manufacturing: the Knowledge Dimension gives examples of the key decisions that needs to be taken by managers regarding effective outsourcing. Decisions are divided around the structural and infrastructural aspects of outsourcing and the key knowledge that needs to be managed to support good de...

  10. RESHORING IN MANUFACTURING AND SERVICES

    Directory of Open Access Journals (Sweden)

    Serghei MĂRGULESCU

    2014-05-01

    Full Text Available The extent of offshoring and outsourcing recorded in manufacturing and services in the last two decades has gradually eroded the advantage of the global arbitrage of labor costs. Along with other factors, this process began to change the options of international relocation of some companies that initially had adopted such a strategy, generating a reverse trend for returning in the country of origin of manufacturing and other activities. This process, called "reshoring," has recently started to gain some consistency. The trend is most notable in the sphere of production. In terms of business and IT services we cannot yet speak of a tangible start of the reshoring phenomenon, as it does in the sphere of production. Nevertheless we can see a slowdown in the offshoring of services and the emergence of new strategies in the field.

  11. A case study of lean, sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Geoff Miller

    2010-06-01

    Full Text Available A small furniture production company has integrated lean tools and sustainability concepts with discrete event simulation modeling and analysis as well as mathematical optimization to make a positive impact on the environment, society and its own financial success. The principles of lean manufacturing that aid in the elimination of waste have helped the company meet ever increasing customer demands while preserving valuable resources for future generations. The implementation of lean and sustainable manufacturing was aided by the use of discrete event simulation and optimization to overcome deficits in lean’s traditional implementation strategies. Lean and green manufacturing can have a more significant, positive impact on multiple measures of operational performance when implemented concurrently rather than separately. These ideas are demonstrated by three applications.

  12. Electric Holding Company Areas

    Data.gov (United States)

    Department of Homeland Security — Holding companies are electric power utilities that have a holding company structure. This vector polygon layer represents the area served by electric power holding...

  13. Collaborative networked organizations - Concepts and practice in manufacturing enterprises

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.; Galeano, N.; Molina, A.

    2009-01-01

    Participation in networks has nowadays become very important for any organization that strives to achieve a differentiated competitive advantage, especially if the company is small or medium sized. Collaboration is a key issue to rapidly answer market demands in a manufacturing company, through

  14. 76 FR 10069 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2011-02-23

    ... time. DEA has investigated Johnson Matthey Inc. to ensure that the company's registration is consistent... 26, 2010, 75 FR 65659, Johnson Matthey Inc., Custom Pharmaceuticals Department, 2003 Nolte Drive... Sufentanil (9740) II Fentanyl (9801) II The company plans to manufacture the listed controlled substances in...

  15. 76 FR 77257 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-12-12

    ...), this is notice that on September 15, 2011, Johnson Matthey Pharma Services, 70 Flagship Drive, North... Schedule Amphetamine (1100) II Methylphenidate (1724) II Hydrocodone (9193) II The company plans to utilize... conduct analytical testing in support of the company's primary manufacturing facility in West Deptford...

  16. 76 FR 39128 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2011-07-05

    ... February 23, 2011, 76 FR 10068, Johnson Matthey Pharmaceutical Materials Inc., Pharmaceutical Service, 25...) II Sufentanil (9740) II Hydrocodone (9193) II The company plans to utilize this facility to... support of the company's primary manufacturing facility in West Deptford, New Jersey. The controlled...

  17. 76 FR 25376 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2011-05-04

    ...), this is notice that on January 5, 2011, Johnson Matthey Pharma Services, 70 Flagship Drive, North... Schedule Amphetamine (1100) II Methylphenidate (1724) II Hydrocodone (9193) II The company plans to utilize... conduct analytical testing in support of the company's primary manufacturing facility in West Deptford...

  18. 76 FR 72974 - Manufacturer of Controlled Substances Notice of Application

    Science.gov (United States)

    2011-11-28

    ... is notice that on September 15, 2011, Johnson Matthey Pharmaceutical Materials Inc., Pharmaceutical... (9193) II Alfentanil (9737) II Remifentanil (9739) II Sufentanil (9740) II The company plans to utilize... conduct analytical testing in support of the company's primary manufacturing facility in West Deptford...

  19. 75 FR 47029 - Manufacturer of Controlled Substances; Notice of Application

    Science.gov (United States)

    2010-08-04

    ...), this is notice that on January 27, 2009, Johnson Matthey Pharma Services, 70 Flagship Drive, North... Schedule Amphetamine (1100) II Hydrocodone (9193) II Methylphenidate (1724) II The company plans to utilize... conduct analytical testing in support of the company's primary manufacturing facility in West Deptford...

  20. 76 FR 25376 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2011-05-04

    ... the public interest at this time. DEA has investigated Johnson Matthey Inc. to ensure that the company... February 3, 2011, 76 FR 6159, Johnson Matthey Inc., Pharmaceuticals Materials, 900 River Road, Conshohocken...) II Hydrocodone (9193) II Morphine (9300) II Thebaine (9333) II The company plans to manufacture the...

  1. 75 FR 9615 - Manufacturer of Controlled Substances Notice of Registration

    Science.gov (United States)

    2010-03-03

    .... DEA has investigated Johnson Matthey Inc. to ensure that the company's registration is consistent with..., 2009, (74 FR 55588), Johnson Matthey Inc., Custom Pharmaceuticals Department, 2003 Nolte Drive, West... Sufentanil (9740) II Fentanyl (9801) II The company plans to manufacture the listed controlled substances in...

  2. 76 FR 36578 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2011-06-22

    ... firm plans to manufacture the listed controlled substances for internal use and for sale to other companies. No comments or objections have been received. DEA has considered the factors in 21 U.S.C. 823(a..., Inc., to ensure that the company's registration is consistent with the public interest. The...

  3. 75 FR 44287 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2010-07-28

    ... firm plans to manufacture the listed controlled substances for internal use and for sale to other companies. No comments or objections have been received. DEA has considered the factors in 21 U.S.C. 823(a..., Inc., to ensure that the company's registration is consistent with the public interest. The...

  4. 75 FR 1813 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2010-01-13

    ... Parkinson's Disease and for manufacture in bulk for investigational new drug (IND) submission and clinical trials. No comments or objections have been received. DEA has considered the factors in 21 U.S.C. 823(a... company's compliance with state and local laws, and a review of the company's background and history...

  5. Studies on Dyeing Performance of Novel Acid Azo Dyes and Mordent Acid Azo Dyes Based on 2,4-Dihydroxybenzophenone

    Directory of Open Access Journals (Sweden)

    Bharat C. Dixit

    2009-01-01

    Full Text Available Novel acid azo and mordent acid azo dyes have been prepared by the coupling of diazo solution of different aminonaphthol sulphonic acids and aromatic amino acids with 2,4-dihydroxybenzophenone. The resultant dyes were characterized by elemental analysis as well as IR and 1H NMR spectral studies. The UV-visible spectral data have also been discussed in terms of structure property relationship. The dyeing assessments of all the dyes were evaluated on wool and silk textile fibers. The dyeing of chrome pretreated wool and silk have also been monitored. The result shows that better hue was obtained on mordented fiber. Results of bactericidal studies of chrome pretreated fibers revealed that the toxicity of mordented dyes against bacteria is fairly good. Dyeing on wool and silk fibers resulted in yellowish pink to reddish brown colourations having excellent light fastness and washing fastness.

  6. Global oil company profiles

    International Nuclear Information System (INIS)

    1997-01-01

    Global Oil Company Profiles provides a comprehensive review of 50 of the top oil companies in the world. Each chapter is devoted to an individual company, providing an invaluable insight into the organisation, its structure and operations. Using the most recent data available, the report offers an up-to-date analysis of performance and future direction, as well as a unique benchmarking system for each company profiled. (author)

  7. Global gas company profiles

    International Nuclear Information System (INIS)

    1997-01-01

    This report provides a detailed assessment of 60 of the top gas companies form around the world, analysing them according to their internal dynamics and in relation to their competitors. It devotes each chapter to an individual company, providing invaluable insight into the organisation's operational background, financial performance and strategic goals. Using the most up-to-date information available, Global Gas Company Profiles allows you to make detailed analysis of each company's performance and future direction. (author)

  8. 77 FR 5848 - Manufacturer of Controlled Substances; Notice of Registration

    Science.gov (United States)

    2012-02-06

    ... October 7, 2011, 76 FR 62449, Johnson Matthey Inc., Custom Pharmaceuticals Department, 2003 Nolte Drive... substance listed in schedule II. The company plans to manufacture the listed controlled substance for sale... registration of Johnson Matthey Inc. to manufacture the listed basic class of controlled substance is...

  9. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  10. Servitization in Danish Manufacturing Firms: A Strategy for Survival?

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Johansen, John

    2010-01-01

    ) and by many traditional manufacturers is perceived as a strategy for survival. On the basis of multiple cases of Danish companies, this paper discusses the main reasons and strategic implications of servitization. Furthermore, it outlines the strategies of how traditional manufacturers can recoup the desired...... level of return from the developments associated with servitization....

  11. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

  12. Section 1: Company directory

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This is a 1992 directory of those companies doing business in all areas of the independent power producers industry. The listing includes the company name, address, telephone and FAX numbers, and the name of a company contact. The listing is international in scope

  13. Identification of natural red and purple dyes on textiles by Fiber-optics Reflectance Spectroscopy.

    Science.gov (United States)

    Maynez-Rojas, M A; Casanova-González, E; Ruvalcaba-Sil, J L

    2017-05-05

    Understanding dye chemistry and dye processes is an important issue for studies of cultural heritage collections and science conservation. Fiber Optics Reflectance Spectroscopy (FORS) is a powerful technique, which allows preliminary dye identification, causing no damage or mechanical stress on the artworks subjected to analysis. Some information related to specific light scattering and absorption can be obtained in the UV-visible and infrared range (300-1400nm) and it is possible to discriminate the kind of support fiber in the near infrared region (1000-2500nm). The main spectral features of natural dye fibers samples, such as reflection maxima, inflection points and reflection minima, can be used in the differentiation of various red natural dyes. In this work, a set of dyed references were manufactured following Mexican recipes with red dyes (cochineal and brazilwood) in order to determine the characteristic FORS spectral features of fresh and aged dyed fibers for their identification in historical pieces. Based on these results, twenty-nine indigenous textiles belonging to the National Commission for the Development of Indigenous People of Mexico were studied. Cochineal and brazilwood were successfully identified by FORS in several pieces, as well as the mixture of cochineal and indigo for purple color. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Survey of corporate social responsibility practices in Nigerian manufacturing sector

    OpenAIRE

    Akinyomi, Oladele John

    2013-01-01

    Based on stakeholders’ theory, this study examined the practice of corporate social responsibility by manufacturing companies in Nigeria. It employed survey research design to study 15 randomly selected companies in the food and beverages sector. A total of 225 questionnaires were administered to collect data. Data analysis revealed that CSR is a familiar concept in the sector as most of the companies do engage in CSR activities regularly. The major areas of focus of the CSR activities includ...

  15. Photoelectrochemical studies of dye-sensitized solar cells using organic dyes

    Energy Technology Data Exchange (ETDEWEB)

    Marinado, Tannia

    2009-10-15

    The dye-sensitized solar cell (DSC) is a promising efficient low-cost molecular photovoltaic device. One of the key components in DSCs is the dye, as it is responsible for the capture of sunlight. State-of-the-art DSC devices, based on ruthenium dyes, show record efficiencies of 10-12 %. During the last decade, metal-free organic dyes have been extensively explored as sensitizers for DSC application. The use of organic dyes is particularly attractive as it enables easy structural modifications, due to fairly short synthetic routes and reduced material cost. Novel dye should in addition to the light-harvesting properties also be compatible with the DSC components. In this thesis, a series of new organic dyes are investigated, both when integrated in the DSC device and as individual components. The evaluation methods consisted of different electrochemical and photoelectrochemical techniques. Whereas the light-harvesting properties of the dyes were fairly easily improved, the behavior of the dye integrated in the DSC showed less predictable photovoltaic results. The dye series studied in Papers II and IV revealed that their dye energetics limited vital electron-transfer processes, the dye regeneration (Paper II) and injection quantum yield (Paper IV). Further, in Papers III-VI, it was observed that different dye structures seemed to alter the interfacial electron recombination with the electrolyte. In addition to the dye structure sterics, some organic dyes appear to enhance the interfacial recombination, possibly due to specific dye-redox acceptor interaction (Paper V). The impact of dye sterical modifications versus the use of coadsorbent was explored in Paper VI. The dye layer properties in the presence and absence of various coadsorbents were further investigated in Paper VII. The core of this thesis is the identification of the processes and properties limiting the performance of the DSC device, aiming at an overall understanding of the compatibility between the

  16. Phytoremediation of textile dyes and effluents: Current scenario and future prospects.

    Science.gov (United States)

    Khandare, Rahul V; Govindwar, Sanjay P

    2015-12-01

    , Typha domingensis, Pogonatherum crinitum and Alternanthera philoxeroides. The developed phytoreactors gave noteworthy treatments, and significant reductions in biological oxygen demand, chemical oxygen demand, American Dye Manufacturers Institute color removal value, total organic carbon, total dissolved solids, total suspended solids, turbidity and conductivity of the dye effluents after phytoremediation. Metabolites of dyes and effluents have been assayed for phytotoxicity, cytotoxicity, genotoxicity and animal toxicity and were proved to be non/less toxic than untreated compounds. Effective strategies to handle fluctuating dye load and hydraulics for in situ treatment needs scientific attention. Future studies on development of transgenic plants for efficacious phytodegradation of textile dyes should be focused. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Training and performance: A case analysis on great manufacturing companies

    OpenAIRE

    Parra, Carlos; Calderón, Gregorio

    2013-01-01

    Resumen Este artículo, abordado desde la perspectiva estratégica, pretende caracterizar la práctica de formación y desarrollo e indagar por su relación con el desempeño organizacional en empresas manufactureras grandes de una región colombiana. Se parte de la teoría de recursos y capacidades, contrastándose en un estudio de caso en seis empresas, utilizando una metodología cualitativa para lo cual se aplicaron entrevistas a profundidad a los gerentes de talento humano. Se concluye, que desde ...

  18. Environmental management in Danish manufacturing companies : attitudes and action

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1996-01-01

    Artiklen bygger på empiriske resultater fra en tilfældigt udtaget population af danske fremstillingsvirksomheder med henblik på at undersøge miljøsituationen i produktionsvirksomheder med mere end 10 ansatte. Undersøgelsen indgår som del i en større nordisk undersøgelse med deltagelse af Norge, S...

  19. Environmental Management in Danish Manufacturing Companies: Attitudes and Action

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1996-01-01

    The importance of environmental management has long been recognized, and has, among other things, resulted in a number of national and international recommendations and guidelines for sustainable business practice. However, while several examples of the actual implementation of environmental...... management initiatives have been reported in the literature, there is little evidence available for an evaluation of the general situation. This is also true for Denmark. A survey was therefore carried out in order to obtain some knowledge of the extent and nature of environmental management practice...

  20. The noise control prioritizing index in a tire manufacturing company

    Directory of Open Access Journals (Sweden)

    Rostam Golmohammadi

    2017-11-01

    Conclusion; the results of the present study indicated that using an index resulted from a combination of various parameters affecting the noise pollution, we would be able to prioritize units for implementing noise pollution control confidently. The results of the present study are applicable to all similar industrial settings.

  1. Waste Measurement Techniques For Lean Companies

    Directory of Open Access Journals (Sweden)

    Maciej Pieńkowski

    2014-12-01

    Full Text Available The paper is dedicated to answer the problem of measuring waste in companies, which are implementing Lean Manufacturing concept. Lack of complex identification, quantification an visualization of waste significantly impedes Lean transformation efforts. This problem can be solved by a careful investigation of Muda, Muri and Mura, which represent the essence of waste in the Toyota Production System. Measuring them facilitates complete and permanent elimination of waste in processes. The paper introduces a suggestion of methodology, which should enable company to quantify and visualize waste at a shop floor level.

  2. Potential development in dye-sensitized solar cells for renewable energy

    CERN Document Server

    Pandikumar, Alagarsamy

    2013-01-01

    The development of photovoltaic technology is expected to solve problems related to energy shortages and environmental pollution caused by the use of fossil fuels. Dye-sensitizedsolar cells (DSSCs) are promising next-generation alternatives to conventional silicon-based photovoltaic devices owing to their low manufacturing cost and potentially high conversion efficiency. This special topic volume addresses recent advances in the research on dye-sensitized solar cells. The focus of this special topic volume is on materials development (sensitizers, nanostructured oxide films, and electrolyte),

  3. Radiative characteristics of CVL pumped dye laser

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Uichi; Ishiguro, Takahide

    1987-09-01

    This paper describes the radiative characteristics of CVL pumped dye laser. It is compared YAG-SH (530 nm) with CVL (511, 578 nm) and CVL (511 nm) for pumping source. Influence of solvent in dye laser power was examined. The present experimental results show that efficiency of CVL (511 nm) pumped dye laser was most high. When the dye solution is at a standstill, the efficiency of dye laser with water and Sodium Lauryl Sulfate (S.L.S., 2 %wt.) was most high among the four kinds of solvent. In the condition of dye solution flow, the water and S.L.S. or ethylene glycol was useful solvent for dye laser.

  4. Radiative characteristics of CVL pumped dye laser

    International Nuclear Information System (INIS)

    Kubo, Uichi; Ishiguro, Takahide.

    1987-01-01

    This paper describes the radiative characteristics of CVL pumped dye laser. It is compared YAG-SH (530 nm) with CVL (511, 578 nm) and CVL (511 nm) for pumping source. Influence of solvent in dye laser power was examined. The present experimental results show that efficiency of CVL (511 nm) pumped dye laser was most high. When the dye solution is at a standstill, the efficiency of dye laser with water and Sodium Lauryl Sulfate (S.L.S., 2 %wt.) was most high among the four kinds of solvent. In the condition of dye solution flow, the water and S.L.S. or Ethylene Glycol was useful solvent for dye laser. (author)

  5. BODIPYs for Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Klfout, Hafsah; Stewart, Adam; Elkhalifa, Mahmoud; He, Hongshan

    2017-11-22

    BODIPY, abbreviation of boron-dipyrromethene, is one class of robust organic molecules that has been used widely in bioimaging, sensing, and logic gate design. Recently, BODIPY dyes have been explored for dye-sensitized solar cells (DSCs). Studies demonstrate their potential as light absorbers for the conversion of solar energy to electricity. However, their photovoltaic performance is inferior to many other dyes, including porphyrin dyes. In this review, several synthetic strategies of BODIPY dyes for DSCs and their further functionalization are described. The photophysical properties of dye molecules and their photovoltaic performances in DSCs are summarized. We aim to provide readers a clear picture of the field and expect to shed light on the next generation of BODIPY dyes for their applications in solar energy conversion.

  6. Influence of styryl dyes on blood erythrocytes

    Science.gov (United States)

    Nizomov, Negmat; Barakaeva, Mubaro; Kurtaliev, Eldar N.; Rahimov, Sherzod I.; Khakimova, Dilorom P.; Khodjayev, Gayrat; Yashchuk, Valeriy N.

    2008-08-01

    It was studied the influence of F, Sbt, Sil, Sbo monomer and homodimer Dst-5, Dst-10, Dbt-5, Dbt-10, Dil-10, Dbo-10 styryl dyes on blood erythrocytes of white rats. It was shown that the homodimer styryl dyes Dst-5, Dbt-5 and Dbo-10 decrease the erythrocytes quantity by 1.5-2 times more as compared with monomer dyes Sbt and Sbo. The main cause of dyes different action is the different oxidation degree of intracellular hemoglobin evoked by these dyes. It was established that the observed effects was connected with different penetration of these dyes through membrane of erythrocytes and with interaction of these dyes with albumin localized in membranes of cells.

  7. Oxidative stability of yogurt with added lutein dye.

    Science.gov (United States)

    Domingos, L D; Xavier, A A O; Mercadante, A Z; Petenate, A J; Jorge, R A; Viotto, W H

    2014-02-01

    This study evaluated the effect of adding lutein dye on the oxidative stability of yogurt during 35 d of refrigerated storage, in the presence and absence of light. Yogurts manufactured without and with the equivalent of 1.5mg of lutein in 120 g of the final product were characterized for their total carotenoid and riboflavin contents, and the behaviors of both riboflavin and lutein were monitored during storage. A decrease in riboflavin content occurred, with concurrent appearance of its derived-oxidation products in the yogurts without added lutein and exposed to light during storage. The yogurts with added lutein dye showed constant lutein and riboflavin contents throughout storage both for the samples stored under light and for those stored in the dark. Yogurts (120 g) with the addition of 0.5, 1.5, and 2.5mg of lutein dye were evaluated for their sensory acceptance, and the statistical analysis showed no differences between the samples for the attributes of aroma and flavor. These results indicate that the added lutein remained stable throughout the storage period and conferred protection for the riboflavin against photooxidation, preserving the quality of the yogurts. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  8. Participatory ergonomics in redesigning a dyeing tub for fabric dyers.

    Science.gov (United States)

    Parimalam, P; Premalatha, M R; Padmini, D S; Ganguli, A K

    2012-01-01

    The 'saree' worn by women in India and many South Asian countries is dyed using a tub, usually in small scale units employing low capital and a small number of workers. While using these tubs, workers adopt awkward postures over long periods of time which results in severe discomfort in the neck, shoulders and lower extremities. The purpose of the study was to redesign the dyeing tub using a participatory approach and to study the impact of the newly designed tub on the reported body discomfort and rate of production. Redesigning of the dyeing tub was carried out using three parallel participative processes--(1) eliciting the views of workers who use the tub, (2) interacting with the proprietors of the small scale dyeing units (the employers) and the tub manufacturers, and (3) iterative prototype tub development based on inputs from the first two processes. These processes facilitated involvement of the stake-holders and the acceptance of change. The final prototype was tested by nine workers for a period of three months to evaluate the reduction in body discomfort and increase in rate of production (output). Studies on the impact of the new tub showed a reduction in discomfort level from 'severe' to 'moderate', and a mean increase of 7.9% in the output, confirming the benefits of the participative approach to ergonomics intervention. The involvement, trust and credibility generated by the participative process facilitated the acceptance of the final design.

  9. Balances instruments, manufacturers, history

    CERN Document Server

    Robens, Erich; Kiefer, Susanne

    2014-01-01

    The book deals mainly with direct mass determination by means of a conventional balances. It covers the history of the balance from the beginnings in Egypt earlier than 3000 BC to recent developments. All balance types are described with emphasis on scientific balances. Methods of indirect mass determination, which are applied to very light objects like molecules and the basic particles of matter and celestial bodies, are included.  As additional guidance, today’s manufacturers are listed and the profile of important companies is reviewed. Several hundred photographs, reproductions and drawings show instruments and their uses. This book includes commercial weighing instruments for merchandise and raw materials in workshops as well as symbolic weighing in the ancient Egyptian’s ceremony of ‘Weighing of the Heart’, the Greek fate balance, the Roman  Justitia, Juno Moneta and Middle Ages scenes of the Last Judgement with Jesus or St. Michael and of modern balances. The photographs are selected from the...

  10. MERGER ACCOUTING FOR COMPANIES

    Directory of Open Access Journals (Sweden)

    SUCIU GHEORGHE

    2014-05-01

    Full Text Available Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and must respect national and international regulations. One important request concerning the merger operations is that the accounting values of the assets, debts and ownership equity must be brought to the present financial value.

  11. Characteristics of a Broadband Dye Laser Using Pyrromethene and Rhodamine Dyes

    Science.gov (United States)

    Tedder, Sarah A.; Danehy, Paul M.; Wheeler, Jeffrey L.

    2011-01-01

    A broadband dye laser pumped by a frequency-doubled Nd:YAG laser with a full-width half-maximum (FWHM) from 592 to 610 nm was created for the use in a dual-pump broadband CARS system called WIDECARS. The desired broadband dye laser was generated with a mixture of Pyrromethene dyes as an oscillator gain medium and a spectral selective optic in the oscillator cavity. A mixture of Rhodamine dyes were used in the amplifier dye cell. To create this laser a study was performed to characterize the spectral behavior of broadband dye lasers created with Rhodamine dyes 590, 610, and 640, Pyrromethene dyes 597 and 650 as well as mixture of these dyes.

  12. Octane-Assisted Reverse Micellar Dyeing of Cotton with Reactive Dyes

    Directory of Open Access Journals (Sweden)

    Alan Yiu-lun Tang

    2017-12-01

    Full Text Available In this study, we investigated the computer colour matching (CCM of cotton fabrics dyed with reactive dye using the octane-assisted reverse micellar approach. The aim of this study is to evaluate the colour quality and compare the accuracy between CCM forecasting and simulated dyeing produced by conventional water-based dyeing and octane-assisted reverse micellar dyeing. First, the calibration of dyeing databases for both dyeing methods was established. Standard samples were dyed with known dye concentrations. Computer colour matching was conducted by using the colour difference formula of International Commission on Illumination (CIE L*a*b*. Experimental results revealed that the predicted concentrations were nearly the same as the expected known concentrations for both dyeing methods. This indicates that octane-assisted reverse micellar dyeing system can achieve colour matching as good as the conventional water-based dyeing system. In addition, when comparing the colour produced by the conventional water-based dyeing system and the octane-assisted reverse micellar dyeing system, the colour difference (ΔE is ≤1, which indicates that the reverse micellar dyeing system could be applied for industrial dyeing with CCM.

  13. Integration of Manufacturing and Development in Emerging Markets

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2011-01-01

    The paper investigates the problems related to functional integration between manufacturing activities and R&D activities in emerging markets within multinational companies. A framework to this end is developed and illustrated in relation to four cases from multinational companies, which have...... established R&D and manufacturing in China or India. The findings point to the importance of contingencies such as industrial clock speed, technological complexity, as well as the extent to which local adaptation is needed. Keywords: Co-location, Emerging markets, Functional integration, Manufacturing, R&D....

  14. 76 FR 1349 - Airworthiness Directives; Cessna Aircraft Company (Cessna) (Type Certificate A00003SE Previously...

    Science.gov (United States)

    2011-01-10

    ... Airworthiness Directives; Cessna Aircraft Company (Cessna) (Type Certificate A00003SE Previously Held by... Company (Type Certificate A00003SE previously held by Columbia Aircraft Manufacturing (previously The... Cessna Aircraft Company (Cessna) (Type Certificate A00003SE previously held by Columbia Aircraft...

  15. A new leuco dye dosifilm PVG

    International Nuclear Information System (INIS)

    Liu Aiguo; Chen Wenxiu; Jia Haishun

    1995-01-01

    A leuco dye film dosimeter for dose measurement on Co-60 gamma radiation processing was developed. The matrix material polyvinyl butyral (PVB) with leuco malachite green (LMG) and additive halogenated compounds (RX) were manufactured as the PVG dosifilm. Its response (Δ A/L vs dose) at 627nm showed a linearity (correlation coefficient r>0.999) in the dose range from 0.5 to 80 kGy. The calibration coefficient of temperature during irradiation was + 0.053/degC. The response increased slightly with the increasing of relative humidities (0-96.4%); and the calibration coefficient was +0.006/Δr.h(%). From 54.9% to 96.4% the deviation was less than 4%. The PVG dosifilm was stable before and after irradiation when it was stored in the dark at a given relative humidity. The deviation of response on PVG dosifilm kept in a brown desiccator was less than 4% after 40 days. It was suitable to serve as a routine dosimeter. (author)

  16. A new leuco dye dosifilm PVG

    Energy Technology Data Exchange (ETDEWEB)

    Aiguo, Liu; Wenxiu, Chen; Haishun, Jia [Beijing Normal University, Beijing (China). Dept. of Chemistry

    1996-05-01

    A leuco dye film dosimeter for dose measurement on {sup 60}Co gamma radiation processing was developed. The matrix material polyvinyl butyryl (PVB) with leuco malachite green (LMG) and additive halogenated compounds (RX) were manufactured as the PVG dosifilm. Its response ({Delta}A/L vs dose) at 627 nm showed a linearity (correlation coefficient r>0.999) in the dose range from 0.5 to 80 kGy. The calibration coefficient of temperature during irradiation was +0.053/degree C. The response increased slightly with the increasing of relative humidities (0{approx}96.4%); and the the calibration coefficient was +0.006/{Delta}r. h(%). From 54.9% to 96.4% the deviation was less than 4%. The PVG dosifilm was stable before and after irradiation when it was stored in the dark at a given relative humidity. The deviation of response on PVG dosifilm kept in a brown desiccator was less than 4% after 40 days. It was suitable to serve as a routine dosimeter.

  17. A new leuco dye dosifilm PVG

    Energy Technology Data Exchange (ETDEWEB)

    Aiguo, Liu; Wenxiu, Chen; Haishun, Jia [Beijing Normal Univ., BJ (China). Dept. of Chemistry

    1995-03-01

    A leuco dye film dosimeter for dose measurement on Co-60 gamma radiation processing was developed. The matrix material polyvinyl butyral (PVB) with leuco malachite green (LMG) and additive halogenated compounds (RX) were manufactured as the PVG dosifilm. Its response ({Delta} A/L vs dose) at 627nm showed a linearity (correlation coefficient r>0.999) in the dose range from 0.5 to 80 kGy. The calibration coefficient of temperature during irradiation was + 0.053/degC. The response increased slightly with the increasing of relative humidities (0-96.4%); and the calibration coefficient was +0.006/{Delta}r.h(%). From 54.9% to 96.4% the deviation was less than 4%. The PVG dosifilm was stable before and after irradiation when it was stored in the dark at a given relative humidity. The deviation of response on PVG dosifilm kept in a brown desiccator was less than 4% after 40 days. It was suitable to serve as a routine dosimeter. (author).

  18. INTERNATIONALIZATION STRATEGIES: A CASE STUDY AT SMALL EXPORT COMPANIES

    Directory of Open Access Journals (Sweden)

    Elaine Di Diego Antunes

    2009-04-01

    Full Text Available The purpose of this study is to identify the main internationalization strategies used by small manufacturers of hammocks. Our findings show that these export companies have up to 20 employees and their main internationalization strategy is exportation. This plan is carried out in 3 ways: indirect exportation, through trading companies; direct exportation, through sales performed in the companies and cooperative exportation, through a network of dealers in greater companies. Its was also verified that some organizations export up to 60% of their products while the vast majority does not even export 5% of it, turning primarily to the domestic market.

  19. Ford Motor Company - Learning from the Automotive Industry

    OpenAIRE

    Haas-Kotzegger, Ursula; Schlegelmilch, Bodo B.; Ambos, Björn

    2013-01-01

    This case study discusses the challenges faced by Ford Motor Company, one of the world's biggest car manufactures. In 2007, after Ford reported one of the worst losses in the company's history, the firm is in the middle of a restructuring process. The "Way Forward Initiative", started by Bill Ford should bring the company back into the fast lane. The case offers background information on the company and its different divisions. It provides the reader with data on the core markets of Ford wi...

  20. Artificial evolution of coumarin dyes for dye sensitized solar cells.

    Science.gov (United States)

    Venkatraman, Vishwesh; Abburu, Sailesh; Alsberg, Bjørn Kåre

    2015-11-07

    The design and discovery of novel molecular structures with optimal properties has been an ongoing effort for materials scientists. This field has in general been dominated by experiment driven trial-and-error approaches that are often expensive and time-consuming. Here, we investigate if a de novo computational design methodology can be applied to the design of coumarin-based dye sensitizers with improved properties for use in Grätzel solar cells. To address the issue of synthetic accessibility of the designed compounds, a fragment-based assembly is employed, wherein the combination of chemical motifs (derived from the existing databases of structures) is carried out with respect to user-adaptable set of rules. Rather than using computationally intensive density functional theory (DFT)/ab initio methods to screen candidate dyes, we employ quantitative structure-property relationship (QSPR) models (calibrated from empirical data) for rapid estimation of the property of interest, which in this case is the product of short circuit current (Jsc) and open circuit voltage (Voc). Since QSPR models have limited validity, pre-determined applicability domain criteria are used to prevent unacceptable extrapolation. DFT analysis of the top-ranked structures provides supporting evidence of their potential for dye sensitized solar cell applications.

  1. Efficacy of Lean Manufacturing to Improve Production Performance

    Directory of Open Access Journals (Sweden)

    Israel Balogun

    2016-12-01

    Full Text Available The lean manufacturing system is a technique of manufacturing products in time. The concept of lean manufacturing principles employs simpler ways of communicating required materials as well as manual technique in ensuring the provision of signals for replenishment of materials the production companies require. Performance on the other hand, can be considered the attainment of value effectively and efficiently. Lean manufacturing and performance production goes hand in hand. Through utilizing lean manufacturing method, most companies would be able to tailor their processes in achieving effective performance and meeting unique requests from their consumers. The exploratory observations conducted in the study was purposely for examining the nature of complex interactions involved between major constructs and environmental sustainability at the parent company and the tire part vendors. The method of the research was a qualitative case study. The research data were obtained from with the case company and through structured interviews the case company's consumers. The case-specific tools were first developed in close co-operation with the case company. Future research agenda addresses gaps in the current literature and suggests relevant framework from which to explore this phenomenon.

  2. Advanced treatments for the removal of a textile dye

    International Nuclear Information System (INIS)

    Almazan S, P. T.

    2016-01-01

    In this work, the remove a dye from aqueous solution and the treatment of textile wastewater using natural and iron and copper modified materials and advanced oxidation by Fenton and photo-Fenton heterogeneous processes are presented. Clay and activated carbon were modified using Fe and Cu electrodes at ph values of 7 and 2 respectively. The materials were characterized by scanning electronic microscopy (Sem), electron X-ray dispersive spectroscopy (EDS), X-ray diffraction and specific area (Bet), the optimum ph for clay modifications with Fe and Cu was 7, whereas for copper modified activated carbon was 2, because de elemental analysis indicated that under the above conditions the content of evaluated metals is highest. The specific area for natural and iron and copper modified clay samples was 5.97, 131.30 and 78.44 m"2/g, whereas for natural and copper modified activated carbon at ph 2 was 654.85 and 647.61 m"2/g. Dye and wastewater used in this study were obtained from a laundry where jeans are manufactured in Almoloya del Rio in Mexico State. Dye was characterized by infrared spectrophotometry and UV-Vis and it was compared with a standard of potassium indigo trisulfonate and it was observed that both spectra were identical, whereby the dye used in this study is an indigo dye with a maximum absorption band at 591 nm. The characterization of wastewater shows a low biodegradability index (0.25) indicating the presence of non-biodegradability organic matter, and a high concentration of phosphorous was found (93.7 mg/L). A compound parabolic concentrator (CPC-2D) was built to concentrate UV radiation from sunlight and applied in photo-Fenton heterogeneous process obtaining concentrated UV-A and UV-B radiation of 54.29±0.71 and 1.65±0.37 W/m"2 respectively. Iron modified clay (Mt-Fe-7) and copper modified activated carbon (Ac-Cu-2) was used as catalyst in the photo-Fenton process with hydrogen peroxide. The results show that using 1.5 g of catalyst, a

  3. Biochemical study of some environmental pollutants dyes Part II: disperse dyes

    International Nuclear Information System (INIS)

    Shakra, S.; Ahmed, F.A.; Fetyan, N.A.

    2005-01-01

    This work was aimed to develop a method for removal of the dyes color from the textile wastewater that is well be much less costly than the other chemical or physical methods used. It therefore included: 1. Preparation of three disperses dyes. 2. Isolation of dyes degradable microorganisms from wastewater effluents and soil after adding 200 ppm of each dye individually. 3. Decolorisation and biodegradation of the dyes in liquid culture of the isolated bacteria (Bacillus thuringiensis). 4. Identification of the probable byproducts by different instruments. 5. Toxicity assessment of the dyes and their biodegraded products

  4. Key Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  5. Open Source Telecommunication Companies

    Directory of Open Access Journals (Sweden)

    Peter Liu

    2007-08-01

    Full Text Available Little is known about companies whose core business is selling telecommunications products that lever open source projects. Open source telecommunications (OST companies operate in markets that are very different from typical software product markets. The telecommunications market is regulated, vertically integrated, and proprietary designs and special chips are widely used. For a telecommunications product to be useful, it must interact with both access network products and core network products. Due to specifications in Service Agreements Levels, penalties for failures of telecommunications products are very high. This article shares information that is not widely known, including a list of OST companies and the open source projects on which they depend, the size and diversity of venture capital investment in OST companies, the nature of the commercial product-open source software and company-project relationships, ways in which OST companies make money, benefits and risks of OST companies, and competition between OST companies. Analysis of this information provides insights into the ways in which companies can build business models around open source software. These findings will be of interest to entrepreneurs, top management teams of incumbent companies that sell telecommunications products, and those who care about Ontario's ability to compete globally.

  6. Handbook of Manufacturing Control Fundamentals, description, configuration

    CERN Document Server

    Lödding, Hermann

    2013-01-01

    This first-time English publication of one of Germany’s leading manufacturing control handbooks provides a comprehensive overview of the state of the art, with detailed and easy to understand descriptions of numerous control techniques from Kanban to CONWIP to Backlog Control. Based on the proven funnel model and written for the industry, this book clearly illustrates how companies can use manufacturing control to effectively improve on-time delivery, reduce inventories and cut down throughput times. “This book distinguishes itself with its convincing systematic approach based on thorough international research. Its clear presentation and direct applicability for analysing and configuring the manufacturing control make this handbook an outstanding and unique publication on PPC.” Hans-Peter Wiendahl “The field of manufacturing control is very convincingly reviewed and presented from a theoretical and methodological perspective. Both researchers as well as practitioners will profit from it.” Peter N...

  7. Ergonomic Conditions in Small Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Ashraf A. Shikdar

    2001-12-01

    Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

  8. Reducing of Manufacturing Lead Time by Implementation of Lean Manufacturing Principles

    Directory of Open Access Journals (Sweden)

    Hussein Salem Ketan

    2015-08-01

    Full Text Available Many organizations today are interesting to implementing lean manufacturing principles that should enable them to eliminating the wastes to reducing a manufacturing lead time. This paper concentrates on increasing the competitive level of the company in globalization markets and improving of the productivity by reducing the manufacturing lead time. This will be by using the main tool of lean manufacturing which is value stream mapping (VSM to identifying all the activities of manufacturing process (value and non-value added activities to reducing elimination of wastes (non-value added activities by converting a manufacturing system to pull instead of push by applying some of pull system strategies as kanban and first on first out lane (FIFO. ARENA software is used to simulate the current and future state. This work is executed in the state company for electrical industries in Baghdad. The obtained results of the application showed that implementation of lean principles helped on reducing of a manufacturing lead time by 33%.

  9. Inventory of nanotechnology companies in Mexico

    Science.gov (United States)

    Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

    2016-02-01

    This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

  10. Inventory of nanotechnology companies in Mexico

    International Nuclear Information System (INIS)

    Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

    2016-01-01

    This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications

  11. Influence of organisational culture on company performance

    OpenAIRE

    R.M. Yusuff; A. Busu; A. Rashid; N. Zulkifli

    2008-01-01

    Purpose: The lack of organizational effort to assess cultural compatibility or fit prior to the engagement offirms has contributed to the failure of several mergers and acquisition. A Korean public listed company withmanufacturing plants in Malaysia and New Zealand found that the performances of the newly acquired plantswere significantly lower than the manufacturing plants in Korea.Design/methodology/approach: In this study, the influence of national culture on organizational culture andthe ...

  12. Inventory of nanotechnology companies in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Appelbaum, Richard, E-mail: rich@global.ucsb.edu [University of California at Santa Barbara, MacArthur Foundation Chair in Sociology and Global & International Studies Co-PI, Center for Nanotechnology and Society, Social Science and Media Studies 2103 (United States); Zayago Lau, Edgar [Center for Research and Advanced Studies of the National Polytechnic Institute (CINVESTAV, Zacatenco)., Multidisciplinary Graduate Programs (Mexico); Foladori, Guillermo [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico); Parker, Rachel [Canadian Institute for Advanced Research, Research Programs (Canada); Vazquez, Laura Liliana Villa [Universidad Autónoma de Zacatecas (Mexico); Belmont, Eduardo Robles [UNAM, Institute for Research in Applied Mathematics and Systems (IIMAS) (Mexico); Figueroa, Edgar Ramón Arteaga [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico)

    2016-02-15

    This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

  13. Synthesis, characterization and dyeing behavior of heterocyclic acid dyes and mordent acid dyes on wool and silk fabrics

    Directory of Open Access Journals (Sweden)

    Patel Hitendra M.

    2012-01-01

    Full Text Available Novel heterocyclic acid and mordent acid dyes were synthesized by the coupling of diazonium salt solution of different aromatic amines with 2- butyl-3-(4-hydroxybenzoylbenzofuran. The resulting heterocyclic acid dyes were characterized by spectral techniques, i.e., elemental analysis, IR, 1HNMR, 13C-NMR spectral studies and UV- visible spectroscopy. The dyeing performance of all the heterocyclic acid dyes was evaluated on wool and silk fabrics. The dyeing of chrome pre treated wool and silk fabrics showed better hues on mordented fabrics. Dyeing of wool and silk fabrics resulted in pinkish blue to red shades with very good depth and levelness. The dyed fabrics showed excellent to very good light, washing, perspiration, sublimation and rubbing fastness.

  14. Fate of Colored Smoke Dyes

    Science.gov (United States)

    1992-01-01

    4.13] have been applied to their estimation. This approach has the advantages of sensitivity and of not requiring high purity and known structures...Chrom absorbance detector, and an Alltech Econosil C-18 (10 micrometer) column (4.6 mm X 25 cm with guard column). The mobile phase, HPLC-grade methanol...water partition coefficient or vice versa. The HPLC method is of similar precision and has the advantage that known structure and purity of the dye are

  15. Broad band exciplex dye lasers

    International Nuclear Information System (INIS)

    Dienes, A.; Shank, C.V.; Trozzolo, A.M.

    1975-01-01

    The disclosure is concerned with exciplex dye lasers, i.e., lasers in which the emitting species is a complex formed only from a constituent in an electronically excited state. Noting that an exciplex laser, favorable from the standpoint of broad tunability, results from a broad shift in the peak emission wavelength for the exciplex relative to the unreacted species, a desirable class resulting in such broad shift is described. Preferred classes of laser media utilizing specified resonant molecules are set forth. (auth)

  16. Dataset on analysis of dyeing property of natural dye from Thespesia populnea bark on different fabrics

    Directory of Open Access Journals (Sweden)

    Kuchekar Mohini

    2018-02-01

    Full Text Available The natural dyes separated from plants are of gaining interest as substitutes for synthetic dyes in food and cosmetics. Thespesia populnea (T. populnea is widely grown plant and used in the treatment of various diseases. This study was aimed to separate natural dye from T. populnea bark and analysis of its dyeing property on different fabrics. In this investigation pharmacognostic study was carried out. The pharmacognostic study includes morphological study, microscopical examination, proximate analysis along with the phytochemical study. The dyeing of different fabric was done with a natural dye extracted from T. populnea bark. The fabrics like cotton, butter crep, polymer, chiken, lone, ulene and tarakasa were dye with plant extract. The various evaluation parameters were studied. It includes effect of washing with water, effect of soap, effect of sunlight, effect of alum, effect of Cupric sulphate, microscopical study of fabrics and visual analysis of dyeing by common people were studied. In results, natural dye isolated from T. populnea bark could be used for dyeing fabrics with good fastness properties. The studies reveals that, the dyeing property of fabrics after washing with water and soap, exposed to sunlight does not get affected. It was observed that cotton and tarakasa stains better as compared with other fabrics. It was concluded that the ethanolic extract having good dyeing property. Keywords: Plant, Thespesia populnea, Bark, Natural dye, Fabrics

  17. Development of Advanced Ceramic Manufacturing Technology; FINAL

    International Nuclear Information System (INIS)

    Pujari, V.K.

    2001-01-01

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

  18. The Effect of the Implementation of Advanced Manufacturing Technologies on Training in the Manufacturing Sector

    Science.gov (United States)

    Castrillon, Isabel Dieguez; Cantorna, Ana I. Sinde

    2005-01-01

    Purpose: The aim of this article is to gain insight into some of the factors that determine personnel-training efforts in companies introducing advanced manufacturing technologies (AMTs). The study provides empirical evidence from a sector with high rates of technological modernisation. Design/methodology/approach: "Ad hoc" survey of 90…

  19. Intelligent manufacturing through participation : a participative simulation environment for integral manufacturing enterprise renewal

    NARCIS (Netherlands)

    Eijnatten, F.M. van

    2002-01-01

    This book deals with a 'Participative Simulation environment for Intelligent Manufacturing' (PSIM). PSIM is a software environment for use in assembly operations and it is developed and pilot-demonstrated in five companies: Volvo (Sweden), Finland Post, Fiat (Italy), Yamatake (Japan), Ford (USA).

  20. Service Offering at Electrical Equipment Manufacturers

    Directory of Open Access Journals (Sweden)

    Lucie Kaňovská

    2015-09-01

    Full Text Available Purpose of the article: The aim of the paper is to uncover ways of managing service offering provided by electrical equipment manufactures in the Czech Republic. The segment is extremely important for Czech industry nowadays, especially because of many companies being subcontractors for the car industry and mechanical engineering. The producers of electric equipment comply with the Czech industry classification CZ-NACE 27. Methodology/methods: The questionnaire in the form of the Likert scale was prepared to gather information about customer services. The respondents were usually directors or managers, e.g. employees with high competencies of knowing customer services in this particular market. The total of 22 companies were included in the survey. Research was focused on the following industries classifications belonging to CZ-NACE 27: CZ-NACE 27, CZ-NACE 271 and CZ-NACE 273. According to Czech Statistical Office the total number of companies belonging to these 3 segments is 136. It means 16,2% companies belonging to CZ-NACE 27 participated in our research. Basic statistical methods were used to analyse the complete database. Scientific aim: The paper deals with the problem of service offering provided by today’s manufacturers. Global understanding of services that manufacturers really develop, sell, deliver and manage is still limited. Findings: Managing service offering provided by today‘s manufacturers shows that 1 Manufacturers not offer only tangible products, but also wide range of services and even information and support. 2 New products are not designed only according to company technicians, but also according to their customers. Their products and services are developed, tested and improved according to their needs. 3 Services provide complex customer care from time product selection to its end. Conclusions: Manufacturers of tangible products need to enlarge their product offering to be able to satisfy customers. Therefore

  1. Public Shareholdership Energy Companies

    International Nuclear Information System (INIS)

    Kist, A.W.; Crone, F.J.M.; Hudig, D.F.; Ketting, N.G.; De Swaan, T.; Willems, R.

    2008-06-01

    National and international developments on the energy markets and changes in legislation and regulation require a renewed strategic orientation of energy companies and their shareholders. Decentralized authorities will have to reconsider their position as a shareholder in energy companies carefully. This report provides an overview of the recommendations of the Kist Commission on how provinces and municipalities can make a well-considered choice as shareholder of energy companies. [mk] [nl

  2. Privatised companies and market

    International Nuclear Information System (INIS)

    Salini, M. P.

    2001-01-01

    The Italian Government decided to adopt the public company structure where a little group of medium-term investors had the task of supporting the transition of the privatised companies to the market. The article examines the reasons for this decision and its failure in attaining the purpose, not excluding the possibility for the public company of imposing itself in the long period and in a context of a minor legislative intervention and more effective Corporate Governance rules [it

  3. Peranan Metode Activity Based Costing Dalam Menentukan Cost of Goods Manufactured

    OpenAIRE

    Martusa, Riki; Darma, Stephanus Ryan; Carolina, Verani

    2011-01-01

    The purpose of this research is to know production process of a textile company in Bandung and to analyze the comparison between cost of goods manufactured calculation methods, that applied in the company (traditional costing method) and Activity Based Costing (ABC) method. The obatained data was performed monthly during the year 2009. Based on analysis result, Cost Of Goods Manufactured calculation for unpattern material using ABC method resulted the Cost Of Goods Manufactured that is lower ...

  4. Synthesis and characterization of reactive dye-cassava mesocarp ...

    African Journals Online (AJOL)

    The synthesis of triazine based reactive dyes was carried out. The resultant dyes were characterized by thin layers chromatography, molecular weight, infrared and ultra- violet spectroscopy, and used in dyeing cassava mesocarp to produce dye modified cellulosic substrates. The dyed substrates were tested for dye fixation, ...

  5. The Danish East India Company

    DEFF Research Database (Denmark)

    Sørensen, Karsten Engsig

    2005-01-01

    The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la......The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la...

  6. Dye removal from textile wastewater using bioadsorbent

    International Nuclear Information System (INIS)

    Gardazi, S.M.H.

    2014-01-01

    Textile industries throughout the world produce huge quantities of dyes and pigments annually. Effluents from textile industries are dye wastewater, and disposal of these wastes to freshwater bodies causes damage to the environment. Among the treatment technologies, adsorption is an attractive and viable option, provided that the sorbent is inexpensive and readily available for use. In this study, a typical basic dye, methylene blue, in wastewater was treated using Melia azedarach sawdust. The effects of contact time, adsorbent amount and particle size were investigated on the removal efficiency of adsorbent for methylene blue. Complete removal of the dye were attained at higher adsorbent dose of 3 g/L with 50 mg/L initial dye concentration. The maximum adsorption was at 240 minutes, whereas more than 90% removal with 105 meu m particle size of 1 g/L adsorbent for same initial dye concentration. The experimental data best fits with 2 Langmuir adsorption isotherm (R= 0.991). (author)

  7. Biological wastewater treatment of azo dyes

    Energy Technology Data Exchange (ETDEWEB)

    Shaul, G.M.; Dempsey, C.R.; Dostal, K.A. (Environmental Protection Agency, Cincinnati, OH (USA))

    1988-09-01

    EPA Water Engineering Research Laboratory, Office of Research and Development, undertook a study to determine the fate of specific water soluble azo dye compounds in the activated sludge process (ASP). The study was approached by dosing the feed to the pilot ASP systems with various water soluble azo dyes and by monitoring each dye compound through the system, analyzing both liquid and sludge samples. The fate of the parent dye compound was assessed via mass balance calculations. These data could determine if the compound was removed by adsorption, apparent biodegradation, or not removed at all. The paper presents results for 18 dye compounds tested from June 1985 through August 1987. The study was conducted at EPAs Test and Evaluation Facility in Cincinnati, Ohio. The objective of this study was to determine the partitioning of water soluble azo dyes in the ASP.

  8. Panchromatic Response in Solid-State Dye-Sensitized Solar Cells Containing Phosphorescent Energy Relay Dyes

    KAUST Repository

    Yum, Jun-Ho; Hardin, Brianâ E.; Moon, Soo-Jin; Baranoff, Etienne; Nà ¼ esch, Frank; McGehee, Michaelâ D.; Grà ¤ tzel, Michael; Nazeeruddin, Mohammadâ K.

    2009-01-01

    Running relay: Incorporating an energyrelay dye (ERD) into the hole transporter of a dye-sensitized solar cell increased power-conversion efficiency by 29% by extending light harvesting into the blue region. In the operating mechanism (see picture

  9. Time dependent – density functional theory characterization of organic dyes for dye-sensitized solar cells

    KAUST Repository

    Hilal, Rifaat; Aziz, Saadullah G.; Osman, Osman I.; Bredas, Jean-Luc

    2017-01-01

    We aim at providing better insight into the parameters that govern the intramolecular charge transfer (ICT) and photo-injection processes in dyes for dye-sensitised solar cells (DSSC). Density functional theory (DFT) and time-dependent DFT (TD

  10. Incorporating Multiple Energy Relay Dyes in Liquid Dye-Sensitized Solar Cells

    KAUST Repository

    Yum, Jun-Ho; Hardin, Brian E.; Hoke, Eric T.; Baranoff, Etienne; Zakeeruddin, Shaik M.; Nazeeruddin, Mohammad K.; Torres, Tomas; McGehee, Michael D.; Grä tzel, Michael

    2011-01-01

    Panchromatic response is essential to increase the light-harvesting efficiency in solar conversion systems. Herein we show increased light harvesting from using multiple energy relay dyes inside dye-sensitized solar cells. Additional photoresponse

  11. Increased light harvesting in dye-sensitized solar cells with energy relay dyes

    KAUST Repository

    Hardin, Brian E.; Hoke, Eric T.; Armstrong, Paul B.; Yum, Jun-Ho; Comte, Pascal; Torres, Tomá s; Fré chet, Jean M. J.; Nazeeruddin, Md Khaja; Grä tzel, Michael; McGehee, Michael D.

    2009-01-01

    Conventional dye-sensitized solar cells have excellent charge collection efficiencies, high open-circuit voltages and good fill factors. However, dye-sensitized solar cells do not completely absorb all of the photons from the visible and near

  12. Increased light harvesting in dye-sensitized solar cells with energy relay dyes

    KAUST Repository

    Hardin, Brian E.

    2009-06-21

    Conventional dye-sensitized solar cells have excellent charge collection efficiencies, high open-circuit voltages and good fill factors. However, dye-sensitized solar cells do not completely absorb all of the photons from the visible and near-infrared domain and consequently have lower short-circuit photocurrent densities than inorganic photovoltaic devices. Here, we present a new design where high-energy photons are absorbed by highly photoluminescent chromophores unattached to the titania and undergo Förster resonant energy transfer to the sensitizing dye. This novel architecture allows for broader spectral absorption, an increase in dye loading, and relaxes the design requirements for the sensitizing dye. We demonstrate a 26% increase in power conversion efficiency when using an energy relay dye (PTCDI) with an organic sensitizing dye (TT1). We estimate the average excitation transfer efficiency in this system to be at least 47%. This system offers a viable pathway to develop more efficient dye-sensitized solar cells.

  13. The Effects of International Operations on the Relationship Between Manufacturing Improvement Programs and Operational Performance

    DEFF Research Database (Denmark)

    Matyusz, Zsolt; Demeter, Krisztina; Boer, Harry

    The link between manufacturing programs and operational performance, and the effects of company internal and external factors on that relationship, are well studied in the literature, both theoretically and empirically. However, previous studies rarely took into account how the scope of operations...... of the business unit affects the relationship between manufacturing programs and performances. We investigate the scope of operations from the manufacturing perspective (i.e. companies that manufacture in only one country have narrow scope of operations, while companies that manufacture in more than one country...... have broad scope of operations). We apply structural equation modelling (SEM) using PLS path modelling to investigate the effect of scope of operations on the relationship between manufacturing improvement programs and operational performance. Manufacturing improvement programs are programs like...

  14. Hair dye poisoning and the developing world

    Directory of Open Access Journals (Sweden)

    Sampathkumar Krishnaswamy

    2009-01-01

    Full Text Available Hair dye poisoning has been emerging as one of the important causes of intentional self harm in the developing world. Hair dyes contain paraphenylene-diamine and a host of other chemicals that can cause rhabdomyolysis, laryngeal edema, severe metabolic acidosis and acute renal failure. Intervention at the right time has been shown to improve the outcome. In this article, we review the various manifestations, clinical features and treatment modalities for hair dye poisoning.

  15. Value networks in manufacturing sustainability and performance excellence

    CERN Document Server

    Uusitalo, Teuvo

    2017-01-01

    This book highlights innovative solutions together with various techniques and methods that can help support the manufacturing sector to excel in economic, social, and environmental terms in networked business environments. The book also furthers understanding of sustainable manufacturing from the perspective of value creation in manufacturing networks, by capitalizing on the outcomes of the European ‘Sustainable Value Creation in Manufacturing Networks’ project. New dynamics and uncertainties in modern markets call for innovative solutions in the global manufacturing sector. While the manufacturing sector is traditionally driven by technology, it also requires other managerial and organizational solutions in terms of network governance, business models, sustainable solution development for products and services, performance management portals, etc., which can provide major competitive advantages for companies. At the same time, the manufacturing industry is subject to a change process, where business net...

  16. RPC industries - UV and EB equipment manufacturers

    International Nuclear Information System (INIS)

    Rodrigues, A.M.

    1987-01-01

    RPC Industries has been manufacturing electron beam and ultraviolet equipment for the industrial processing of materials for more than 15 years. RPC maintains its headquarters and electron processor manufacturing plant in Hayward, California. UV equipment is made in the company's plant near Chicago. Sales offices are maintained in New York, Illinois, and California in the USA, and in Germany, Japan, Australia, Italy, Israel, and Sweden. Complete testing and pilot facilities are available in Hayward (EB) and near Chicago (UV). Described below are the basic system components, applications and advantages of RPC's UV and EB systems. (orig.)

  17. Manufacturing Improvement Program for the Oil and Gas Industry Supply Chain and Marketing Cluster

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Robert [Oklahoma State Univ., Stillwater, OK (United States)

    2016-09-28

    This project supported upgrades for manufacturing companies in the oil and natural gas supply chain in Oklahoma. The goal is to provide assistance that will lead to the improved efficiency advancement of the manufacturing processes currently used by the existing manufacturing clients. The basis for the work is to improve the economic environment for the clients and the communities they serve.

  18. Solubilization of Hydrophobic Dyes in Surfactant Solutions

    Directory of Open Access Journals (Sweden)

    Ali Reza Tehrani-Bagha

    2013-02-01

    Full Text Available In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs—the critical micelle concentration (CMC—there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

  19. Micro-Cavity Fluidic Dye Laser

    DEFF Research Database (Denmark)

    Helbo, Bjarne; Kristensen, Anders; Menon, Aric Kumaran

    2003-01-01

    We have successfully designed, fabricated and characterized a micro-cavity fluidic dye laser with metallic mirrors, which can be integrated with polymer based lab-on-a-chip microsystems without further processing steps. A simple rate-equation model is used to predict the average pumping power...... threshold for lasing as function of cavity-mirror reflectance, laser dye concentration and cavity length. The laser device is characterized using the laser dye Rhodamine 6G dissolved in ethanol. Lasing is observed, and the influence of dye concentration is investigated....

  20. Ultrasonic assisted dyeing: dyeing of acrylic fabrics C.I. Astrazon Basic Red 5BL 200%.

    Science.gov (United States)

    Kamel, M M; Helmy, H M; Mashaly, H M; Kafafy, H H

    2010-01-01

    The dyeing of acrylic fabrics using C.I. Astrazon Basic Red 5BL 200% has been studied with both conventional and ultrasonic techniques. The effect of dye concentration, dye bath pH, ultrasonic power, dyeing time and temperature were studied and the resulting shades obtained by dyeing with both techniques were compared. Colour strength values obtained were found to be higher with ultrasonic than with conventional heating. The results of fastness properties of the dyed fabrics were studied. X-ray and Scanning Electron Microscope SEM were carried out on dyed samples using both methods of dyeing to find out an explanation for the better dyeability of acrylic fabrics with (US) method. Dyeing kinetics of acrylic fabrics using C.I. Astrazon Basic Red 5BL 200% using conventional and ultrasonic conditions were compared. The time/dye-uptake isotherms are revealing the enhanced dye-uptake in the second phase of dyeing. The values of dyeing rate constant, half-time of dyeing and standard affinity and ultrasonic efficiency have been calculated and discussed.