DEGRADATION OF TEXTILE DYES BY WHITE ROT BASIDIOMYCETES

OpenAIRE

B.P. PARMAR, P.N. MERVANA B.R.M. VYAS*

2014-01-01

ABSTRACT: Dyes released by the textile industries pose a threat to environmental quality. Ligninolytic white-rot basidiomycetes can effectively degrade colored effluents and conventional dyes. White-rot fungi produce various isoforms of extracellular oxidases including laccase, Mn peroxidase and lignin peroxidase (LiP), which are involved in the degradation of lignin in their natural lignocellulosic substrates.  The textile industry, by far the most avid user of synthetic dyes, is in need...

Modern industrial and pharmacological applications of indigo dye and its derivatives--a review.

Science.gov (United States)

Stasiak, Natalia; Kukuła-Koch, Wirginia; Głowniak, Kazimierz

2014-01-01

Plant sources, chemical properties, bioactivities, as well as the synthesis of indigo dye and its derivatives, are reviewed in this paper. These compounds were chosen because of their significant benefits and scope of application as both coloring agents in the textile industry and as pharmacologically active natural products. Their use in traditional chinese medicine (TCM) has directed the attention of European researchers and medical doctors alike. The preparation of indigoferous plants--Indigo naturalis is currently about to be introduced into the European Pharmacopoeia.

Dye removal from textile wastewater using bioadsorbent

International Nuclear Information System (INIS)

Gardazi, S.M.H.

2014-01-01

Textile industries throughout the world produce huge quantities of dyes and pigments annually. Effluents from textile industries are dye wastewater, and disposal of these wastes to freshwater bodies causes damage to the environment. Among the treatment technologies, adsorption is an attractive and viable option, provided that the sorbent is inexpensive and readily available for use. In this study, a typical basic dye, methylene blue, in wastewater was treated using Melia azedarach sawdust. The effects of contact time, adsorbent amount and particle size were investigated on the removal efficiency of adsorbent for methylene blue. Complete removal of the dye were attained at higher adsorbent dose of 3 g/L with 50 mg/L initial dye concentration. The maximum adsorption was at 240 minutes, whereas more than 90% removal with 105 meu m particle size of 1 g/L adsorbent for same initial dye concentration. The experimental data best fits with 2 Langmuir adsorption isotherm (R= 0.991). (author)

Historic cohort study in Montreal's fur industry.

Science.gov (United States)

Guay, D; Siemiatycki, J

1987-01-01

A historic cohort mortality study was carried out among two groups of male workers in the Montreal fur industry: 263 dressers and dyers and 599 fur garment manufacturers. The first group is exposed to a very wide variety of chemicals used in tanning, cleaning, and dyeing fur, including substances considered to be carcinogenic and/or mutagenic. The second group is exposed to residue from the dressing and dyeing stage and to respirable fur dust. The cohorts consisted of all active members of two unions as of January 1, 1966. The mean age of the workers was 43.2 and the mean number of years since first employment 14.1. The follow-up period was from January 1, 1966, to December 31, 1981; 95% of the workers were successfully traced. Observed deaths were compared with those expected based on mortality rates of the population of metropolitan Montreal. Standardized mortality ratios (SMRs) for the manufacturers were significantly low, probably because of the ethnic composition of the cohort and a healthy worker effect. SMRs for the dressers and dyers were also low, but not as low as for the manufacturers. When attention was restricted to the French Canadians in the cohort, the observed deaths were close to the expected; there was a noteworthy excess of colorectal cancer (four observed, 0.8 expected) for dressers and dyers. Apart from this weak suggestive evidence, the results did not indicate any excess mortality risks in the fur industry. However, because of the relatively small number of expected and observed deaths in the cohort and especially among the heavily exposed dressers and dyers, the confidence intervals around SMR estimates were wide and excess risks cannot be ruled out.

Young workers in the construction industry and initial OSH-training when entering work life.

Science.gov (United States)

Holte, Kari Anne; Kjestveit, Kari

2012-01-01

Studies have found that young workers are at risk for injuries. The risk for accidents is high within construction, indicating that young workers may be especially vulnerable in this industry. In Norway, it is possible to enter the construction industry as a full time worker at the age of 18. The aim of this paper was to explore how young construction workers are received at their workplace with regards to OHS-training. The study was designed as a qualitative case study. Each case consisted of a young worker or apprentice (< 25 years), a colleague, the immediate superior, the OHS manager, and a safety representative in the company. The interviews were recorded and analyzed through content analysis. The results showed that there were differences between large and small companies, where large companies had more formalized routines and systems for receiving and training young workers. These routines were however more dependent on requirements set by legislators and contractors more than by company size, since the legislation has different requirements with impact on OHS.

Evaluation of workload among industrial workers with the Need for Recovery Scale.

Science.gov (United States)

Moriguchi, Cristiane S; Alem, Michele E R; Coury, Helenice J C G

2011-01-01

Work conditions can overload a worker's capabilities and result in health complaints. The early identification of hazardous work conditions allows the definition of priorities for more efficient ergonomic interventions. To assess the need for recovery among industrial workers under different work conditions using the Need for Recovery Scale (NFR), and to verify the association between the scores and personal factors, occupational factors and daily activities. 191 workers (mean age of 34.5±8.3 years) from a manufactory industry participated in this study. Workers answered both a questionnaire regarding demographic and occupational factors, and daily activities as well as the NFR. Ergonomic assessment of workplace sectors was carried out based on the Ergonomic Workplace Analysis. The Pearson chi-square test (significance level 5%) was used to verify the association between NFR scores and the variables of interest. The only association was between work sector and NFR score. According to the ergonomic assessment, the work sector with the highest need for recovery also presented the worst environmental and organizational conditions. The Need for Recovery Scale proved to be a helpful tool for differentiating work sectors presenting different workload demands and contributed to the definition of intervention priorities for preserving worker health.

Tooth loss, prosthetic status and treatment needs among industrial workers in Belgaum, Karnataka, India.

Science.gov (United States)

Patil, Vishal V; Shigli, Kamal; Hebbal, Mamata; Agrawal, Neha

2012-01-01

The health of industrial workers often goes uncared for due to their stressful working conditions, busy schedules and poor economic conditions. A cross-sectional survey was conducted to determine the prevalence of tooth loss, prosthetic status and treatment needs among industrial workers in Belgaum, Karnataka, India according to the criteria described in the World Health Organization (WHO) Oral Health Assessment form (1997). A total of 614 workers participated in the study. Information was obtained regarding their oral hygiene practice. The presence or absence of habits, and the frequency and duration since the last visit to a dentist were recorded followed by clinical examination. Chi-square test was used to determine the association between the variables and tooth loss. There was a statistically significant difference between the number of missing teeth in different age groups, methods of cleaning, smoking habits and visits to the dentist. Regarding prosthetic status, only one worker had a fixed prosthesis in the mandibular arch. The study revealed that tooth loss was associated with oral hygiene practices, habits and visits to the dentist. Poor prosthetic status and high treatment needs were observed. This study emphasized the need for improved dental health awareness and availability of dental facilities to industrial workers.

Extension lifetime for dye-sensitized solar cells through multiple dye adsorption/desorption process

Science.gov (United States)

Chiang, Yi-Fang; Chen, Ruei-Tang; Shen, Po-Shen; Chen, Peter; Guo, Tzung-Fang

2013-03-01

In this study, we propose a novel concept of extending the lifetime of dye-sensitized solar cells (DSCs) and reducing the costs of re-conditioning DSCs by recycling the FTO/TiO2 substrates. The photovoltaic performances of DSCs using substrates with various cycles of dye uptake and rinse off history are tested. The results show that dye adsorption and Voc are significantly increased under multiple dye adsorption/desorption process and resulted in the improvement of power conversion efficiency. Moreover, the dyeing kinetics is faster after multiple recycling processes, which is favorable for the industrial application. With surface analysis and charge transport characteristics, we also demonstrate the optimal functionality of TiO2/dye interface for the improved Voc and efficiency. The results confirm that the improved performances are due to increased dye loading and dense packing of dye molecules. Our results are beneficial for the understanding on the extension of DSCs lifetime after long-term operation in the application of DSC modules. This approach may also be applied in the replacement of newly synthesized photosensitizes to the active cells.

A survey of doses to worker groups in the nuclear industry

International Nuclear Information System (INIS)

Khan, T.A.; Baum, J.W.

1991-01-01

The the US National Council on Radiation Protection and Measurements (NCRP) has suggested ''...as guidance for radiation programs that cumulative exposure not exceed the age of the individual in years x 10 mSv (years x 1 rem).'' The International Commission on Radiological Protection (ICRP) has recommended a dose limit of 10 rem averaged over 5 years. With these developments in mind, the US Nuclear Regulatory Commission (NRC) requested the ALARA Center of the Brookhaven National Laboratory to undertake two parallel studies. One study, which is still ongoing, is to examine the impact of the newly recommended dose limits on the nuclear industry as a whole; the other study was intended to assist in this larger project by looking more closely at the nuclear power industry. Preliminary data had indicated that the critical industry as far as the impact of new regulatory limits were concerned would be the nuclear power industry, because, it was conjectured, there existed a core of highly skilled workers in some groups which routinely get higher than average exposures. The objectives of the second study were to get a better understanding of the situation vis grave a vis the nuclear power industry, by identifying the high-dose worker groups, quantifying the annual and lifetime doses to these groups to see the extent of the problem if there was one, and finally to determine if there were any dose-reduction techniques which were particularly suited to reducing doses to these groups. In this presentation we describe some of the things learned during our work on the two projects. For more detailed information on the project on dose-reduction techniques for high-dose worker groups in the nuclear power industry, see NUREG/CR-5139. An industry/advisory committee has been set up which is in the process of evaluating the data from the larger project on the impact of new dose limits and will shortly produce its report. 7 refs., 5 figs., 6 tabs

Prevalence of workers with shifts in hearing by industry: a comparison of OSHA and NIOSH Hearing Shift Criteria.

Science.gov (United States)

Masterson, Elizabeth A; Sweeney, Marie Haring; Deddens, James A; Themann, Christa L; Wall, David K

2014-04-01

The purpose of this study was to compare the prevalence of workers with National Institute for Occupational Safety and Health significant threshold shifts (NSTS), Occupational Safety and Health Administration standard threshold shifts (OSTS), and with OSTS with age correction (OSTS-A), by industry using North American Industry Classification System codes. From 2001 to 2010, worker audiograms were examined. Prevalence and adjusted prevalence ratios for NSTS were estimated by industry. NSTS, OSTS, and OSTS-A prevalences were compared by industry. Twenty percent of workers had an NSTS, 14% had an OSTS, and 6% had an OSTS-A. For most industries, the OSTS and OSTS-A criteria identified 28% to 36% and 66% to 74% fewer workers than the NSTS criteria, respectively. Use of NSTS criteria allowing for earlier detection of shifts in hearing is recommended for improved prevention of occupational hearing loss.

[Occupational risks of a shoe industry from the workers' perspective].

Science.gov (United States)

Luz, Fernanda Reinher da; Loro, Marli Maria; Zeitoune, Regina Célia Gollner; Kolankiewicz, Adriane Cristina Bernat; Rosanelli, Cleci Schmidt Piovesan

2013-01-01

This is a qualitative and descriptive study, which aimed to identify the occupational risks of a shoe industry, as well as the preventive measures taken against those risks, from the workers' perspective. The sample consisted of fifteen workers. Data were collected through semi-structured interviews and analyzed according to content analysis. The ethical aspects were respected and the research was approved by the Committee of Ethics in Research of the Northwest Regional University of Rio Grande do Sul. The results showed that the workers are aware of the risks of their work process, made use of safety measures for personal protection, and the company offers safety devices, informing and performing periodical visits to the sectors, aiming to develop educational actions.

A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

Science.gov (United States)

Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

2013-01-01

To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

Grafting of aniline derivatives onto chitosan and their applications for removal of reactive dyes from industrial effluents.

Science.gov (United States)

Abbasian, Mojtaba; Jaymand, Mehdi; Niroomand, Pouneh; Farnoudian-Habibi, Amir; Karaj-Abad, Saber Ghasemi

2017-02-01

A series of chitosan-grafted polyaniline derivatives {chitosan-g-polyaniline (CS-g-PANI), chitosan-g-poly(N-methylaniline) (CS-g-PNMANI), and chitosan-g-poly(N-ethylaniline) (CS-g-PNEANI)} were synthesized by in situ chemical oxidation polymerization method. The synthesized copolymers were analyzed by means of Fourier transform infrared (FTIR), and ultraviolet-visible (UV-vis) spectroscopies, thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM). These copolymers were applied as adsorbent for removal of acid red 4 (AR4) and direct red 23 (DR23) from aqueous solutions. The adsorption processes were optimized in terms of pH, adsorbent amount, and dyes concentrations. The maximum adsorption capacities (Q m ) for the synthesized copolymers were calculated, and among them the CS-g-PNEANI sample showed highest Q m for both AR4 (98mgg -1 ) and DR23 (112mgg -1 ) dyes. The adsorption kinetics of AR4 and DR23 dyes follow the pseudo-second order kinetic model. The regeneration and reusability tests revealed that the synthesized adsorbents had the relatively good reusability after five repetitions of the adsorption-desorption cycles. As the results, it is expected that the CS-g-PANIs find application for removal of reactive dyes (especially anionic dyes) from industrial effluents mainly due to their low production costs and high adsorption effectiveness. Copyright © 2016 Elsevier B.V. All rights reserved.

Ultrasound assisted enhancement in natural dye extraction from beetroot for industrial applications and natural dyeing of leather.

Science.gov (United States)

Sivakumar, Venkatasubramanian; Anna, J Lakshmi; Vijayeeswarri, J; Swaminathan, G

2009-08-01

There is a growing demand for eco-friendly/non-toxic colorants, specifically for health sensitive applications such as coloration of food and dyeing of child textile/leather garments. Recently, dyes derived from natural sources for these applications have emerged as an important alternative to potentially harmful synthetic dyes and pose need for suitable effective extraction methodologies. The present paper focus on the influence of process parameters for ultrasound assisted leaching of coloring matter from plant materials. In the present work, extraction of natural dye from beetroot using ultrasound has been studied and compared with static/magnetic stirring as a control process at 45 degrees C. The influence of process parameters on the extraction efficiency such as ultrasonic output power, time, pulse mode, effect of solvent system and amount of beetroot has been studied. The use of ultrasound is found to have significant improvement in the extraction efficiency of colorant obtained from beetroot. Based on the experiments it has been found that a mixture of 1:1 ethanol-water with 80W ultrasonic power for 3h contact time provided better yield and extraction efficiency. Pulse mode operation may be useful in reducing electrical energy consumption in the extraction process. The effect of the amount of beetroot used in relation to extraction efficiency has also been studied. Two-stage extraction has been studied and found to be beneficial for improving the yield for higher amounts of beetroot. Significant 8% enhancement in % yield of colorant has been achieved with ultrasound, 80W as compared to MS process both using 1:1 ethanol-water. The coloring ability of extracted beet dye has been tested on substrates such as leather and paper and found to be suitable for dyeing. Ultrasound is also found to be beneficial in natural dyeing of leather with improved rate of exhaustion. Both the dyed substrates have better color values for ultrasonic beet extract as inferred from

Health and safety aspects of textile workers from Solapur (India textile industries

Directory of Open Access Journals (Sweden)

Rahul B Hiremath

2014-12-01

Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent-studies using Congo red dye.

Science.gov (United States)

Taqui, Syed Noeman; Yahya, Rosiyah; Hassan, Aziz; Nayak, Nayan; Syed, Akheel Ahmed

2017-07-03

Fennel seed spent (FSS)-an inexpensive nutraceutical industrial spent has been used as an efficient biosorbent for the removal of Congo red (CR) from aqueous media. Results show that the conditions for maximum adsorption would be pH 2-4 and 30°C were ideal for maximum adsorption. Based on regression fitting of the data, it was determined that the Sips isotherm (R 2 = 0.994, χ 2 = 0.5) adequately described the mechanism of adsorption, suggesting that the adsorption occurs homogeneously with favorable interaction between layers with favorable interaction between layers. Thermodynamic analysis showed that the adsorption is favorable (negative values for ΔG°) and endothermic (ΔH° = 12-20 kJ mol -1 ) for initial dye concentrations of 25, 50, and 100 ppm. The low ΔH° value indicates that the adsorption is a physical process involving weak chemical interactions like hydrogen bonds and van der Waals interactions. The kinetics revealed that the adsorption process showed pseudo-second-order tendencies with the equal influence of intraparticle as well as film diffusion. The scanning electron microscopy images of FSS show a highly fibrous matrix with a hierarchical porous structure. The Fourier transform infrared spectroscopy analysis of the spent confirmed the presence of cellulosic and lignocellulosic matter, giving it both hydrophilic and hydrophobic properties. The investigations indicate that FSS is a cost-effective and efficient biosorbent for the remediation of toxic CR dye.

Direct thermal dyes

Science.gov (United States)

Ehlinger, Edward

1990-07-01

Direct thermal dyes are members of a class of compounds referred to in the imaging industry as color formers or leuco dyes. The oldest members of that class have simple triarylmethane structures, and have been employed for years in various dyeing applications. More complex triarylmethane compounds, such as phthalides and fluorans, are now used in various imaging systems to produce color. Color is derived from all of these compounds via the same mechanism, on a molecular level. That is, an event of activation produces a highly resonating cationic system whose interaction with incident light produces reflected light of a specific color. The activation event in the case of a direct thermal system is the creation of a melt on the paper involving dye and an acidic developer. The three major performance parameters in a thermal system are background color, image density, and image stability. The three major dye physical parameters affecting thermal performance are chemical constituency, purity, and particle size. Those dyes having the best combination of characteristics which can also be manufactured economically dominate the marketplace. Manufacturing high performance dyes for the thermal market involves multi-step, convergent reaction sequences performed on large scale. Intermediates must be manufactured at the right time, and at the right quality to be useful.

Evaluation of Dust Exposure among the Workers in Agricultural Industries in North-East India.

Science.gov (United States)

Dewangan, Krishna N; Patil, Mahesh R

2015-11-01

This study aims to quantify dust exposure among the workers in four different industrial settings: rice mills, flour mills, oil mills, and tea factories and to compare the obtained data with the permissible exposure limit (PEL) of Indian Union Ministry of Labour as well as to compare the dust exposure across activities and seasons. RespiCon(TM) particle sampler was used for collecting dust concentration in the breathing zone of the workers. In total, 149 workers participated in the study and 204 samples were collected. Samples were collected in the vicinity of different processing operations. Samples in the rice mills were collected for two consecutive years in two seasons; however samples from other industries were collected for 1 year. The results indicate that geometric mean (GM) of dust exposure was significantly (P workers are exposed to higher level of respirable dust as compared to the PEL, while total dust exposure to all the workers were higher than the PEL; thus, immediate reduction of dust exposure among the workers is necessary for preventing respiratory system impairment. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Isolation and screening of azo dye decolorizing bacterial isolates from dye-contaminated textile wastewater

Directory of Open Access Journals (Sweden)

Shahid Mahmood

2011-04-01

Full Text Available Azo dyes are released into wastewater streams without any pretreatment and pollute water and soilenvironments. To prevent contamination of our vulnerable resources, removal of these dye pollutants is of greatimportance. For this purpose, wastewater samples were collected from dye-contaminated sites of Faisalabad. About200 bacterial isolates were isolated through enrichment and then tested for their potential to remove RemazolBlack-B azo dye in liquid medium. Five bacterial isolates capable of degrading Remazol Black-B azo dye efficientlywere screened through experimentation on modified mineral salt medium. Isolate SS1 (collected from wastewater ofSupreme Textile Industry was able to completely remove the Remazol Black-B dye from the liquid medium in 18 h.Further, the isolate showed the best performance at the dye concentration of 100 mg L-1 medium (pH 7 and attemperature 35oC. Similarly, yeast extract proved to be the best carbon source for decolorization purpose. Theresults imply that the isolate SS1 could be used for the removal of the reactive dyes from textile effluents.

Dust exposure and the risk of cancer in cement industry workers in Korea.

Science.gov (United States)

Koh, Dong-Hee; Kim, Tae-Woo; Jang, Seunghee; Ryu, Hyang-Woo

2013-03-01

Cement is used widely in the construction industry, though it contains hazardous chemicals such as hexavalent chromium. Several epidemiological studies have examined the association between cement dust exposure and cancer, but these associations have proved inconclusive. In the present study, we examined the association between dust exposure and cancer in cement industry workers in Korea. Our cohort consisted of 1,324 men who worked at two Portland cement manufacturing factories between 1997 and 2005. We calculated cumulative dust exposures, then categorized workers into high and low dust exposure groups. Cancer cases were identified between 1997 and 2005 by linking with the national cancer registry. Standardized incidence ratios (SIRs) were calculated for all workers and the high and low dust exposure groups, respectively. The SIR for overall cancers in all workers was increased (1.35, 95% CI: 1.01-1.78). The SIR for stomach cancer in the high dust exposure group was increased (2.18, 95% CI: 1.19-3.65), but there was no increased stomach cancer risk in the low dust exposure group. The SIR for rectal cancer in all workers was increased (3.05, 95% CI: 1.32-6.02). Rectal cancer risk was similar in the high and low exposure groups. Our findings suggest a potential association between exposure in the cement industry and an increased risk of stomach and rectal cancers. However, due to the small number of cases, this association should be further investigated in a study with a longer follow-up period and adjustment for confounders. Copyright © 2012 Wiley Periodicals, Inc.

Health effects study of the nuclear industry workers in Japan

International Nuclear Information System (INIS)

Tamiko Iwasaki

1997-01-01

To clarify the effects of low-dose and low-dose-rate exposure to the human body, study on the health effects of the nuclear industry workers in Japan was conducted since 1990 by the Institute of Radiation Epidemiology, the Radiation Effects Association, which had been entrusted by the Science and Technology Agency of the Japanese Government. In the first phase analysis between 1986 and 1992, the study population was selected from among persons who were engaged in radiation work at nuclear power plants and associated facilities, and registered in the Radiation Dose Registration Center for Workers. The cohort consisted of 114,900 persons who satisfied the criteria of nationality, age, sex, etc. The average follow-up period was 4.6 years, and the average cumulative dose per person was 13.9 mSv. The total number of deaths among the study population was 1,758, including 661 deaths due to all malignant neoplasms. The Standardized Mortality Ratio of various death causes was compared. Furthermore, the cohort was grouped by five different dose levels, and the O/E was calculated to test whether there is a trend for the death rate to increase with dose. Among nuclear workers no significant increase in deaths nor any relationship with radiation dose was found, except the pancreatic cancer with 10-years lag. Since many previous studies of nuclear industry workers have demonstrated no significant association between exposure dose and pancreatic cancer, we cannot immediately conclude a causal relationship between with radiation. (author)

[Psychosocial Factors and Burnout Syndrome Found in Workers in the Dough Processing Industry, Tepic, Mexico].

Science.gov (United States)

Beltrán, Carolina Aranda; Gónzalez, José Luis López; Barraza Salas, José Horacio

2013-06-01

The workers in the dough processing industry are a population exposed to psychosocial risk factors due to the conditions in the workplace; therefore, they are likely to suffer from one of the consequences of chronic stress to which a worker is exposed daily: burnout syndrome. The aim of this study was to analyze the relationship between psychosocial factors and the burnout syndrome in workers in the dough processing industry in the city of Tepic, Mexico. A cross-sectional and descriptive study was conducted in five companies from the dough processing industry. The total population consisted of 122 workers who were administered the scale of Psychosocial Factors Identification of the Mexican Social Security Institute and the Maslach Burnout Inventory scale, in order to gather information. The presence of adverse psychosocial factors was reported in 18.3%, and 79.8% with the syndrome. There were several variables that behaved as risk factors, specifically, the system of working with the emotional exhaustion. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Prolonged menstrual cycles in female workers exposed to ethylene glycol ethers in the semiconductor manufacturing industry.

Science.gov (United States)

Hsieh, G-Y; Wang, J-D; Cheng, T-J; Chen, P-C

2005-08-01

It has been shown that female workers exposed to ethylene glycol ethers (EGEs) in the semiconductor industry have higher risks of spontaneous abortion, subfertility, and menstrual disturbances, and prolonged waiting time to pregnancy. To examine whether EGEs or other chemicals are associated with long menstrual cycles in female workers in the semiconductor manufacturing industry. Cross-sectional questionnaire survey during the annual health examination at a wafer manufacturing company in Taiwan in 1997. A three tiered exposure-assessment strategy was used to analyse the risk. A short menstrual cycle was defined to be a cycle less than 24 days and a long cycle to be more than 35 days. There were 606 valid questionnaires from 473 workers in fabrication jobs and 133 in non-fabrication areas. Long menstrual cycles were associated with workers in fabrication areas compared to those in non-fabrication areas. Using workers in non-fabrication areas as referents, workers in photolithography and diffusion areas had higher risks for long menstrual cycles. Workers exposed to EGEs and isopropanol, and hydrofluoric acid, isopropanol, and phosphorous compounds also showed increased risks of a long menstrual cycle. Exposure to multiple chemicals, including EGEs in photolithography, might be associated with long menstrual cycles, and may play an important role in a prolonged time to pregnancy in the wafer manufacturing industry; however, the prevalence in the design, possible exposure misclassification, and chance should be considered.

[Current status of hearing loss and related influencing factors in workers with noise exposure in refining and chemical industry].

Science.gov (United States)

Wu, S S; Yu, J N; He, C H; Mu, H X; Wang, C; Zhang, Y; Zhang, C Y; Yu, S F; Li, X L

2016-12-20

Objective: To investigate the current status of hearing loss and related influencing factors in workers with noise exposure in refining and chemical industry. Methods: From August 2015 to March 2016, the investigation method of collecting the data of past occupational health examinations and measuring noise in working environment was used to enroll 8 672 male workers. Results: Of all workers, 11.6% were diagnosed with hearing loss. There were significant differences in the distribution of hearing impairment among workers exposed to noise at different ages, device types and types of work (χ(2)=17.80, 77.80 and 30.53, all P hearing loss in workers with noise exposure in refining and chemical industry. Conclusion: The level of noise exposure and working years with noise exposure are main influencing factors for hearing loss in workers with noise exposure in refining and chemical industry.

COMPARATIVE STUDY OF TWO DYEING METHODS USING REACTIVE DYE

Directory of Open Access Journals (Sweden)

HINOJOSA Belén

2016-05-01

Full Text Available Environment preservation is a common worry not only for people but for companies as well. Industry is more and more concern about the necessity of developing new and more respectful processes. Dye is one of the most important processes in the textile industry but it is also considered as no too safe regarding environment issues. This process uses large amounts of water and generates big volumes of wastewater. Following this issue, new regulations and laws emerge to control the waste generated. This leads to the companies and increased costs in terms of wastewater treatments and high water consumption. In this research we compare two systems on garment finishing application, the conventional bath process and the new Ecofinish system that is able to save water and product. To compare these processes, we carried out a reactive dyeing using both systems in order to determine the quality differences in the final product. For this purpose, the samples have been tested to washing and rubbing fastness, according to UNE EN ISO 105 C10 and UNE- EN ISO 105 X12 standards, respectively. This study confirms that this system achieves water savings and reduces the wastewater produced, getting a good dyeing. This process can be considered as an alternative to the conventional one.

Analysis of radiation overexposures for radiation workers in industrial institutions during 1991-1995

International Nuclear Information System (INIS)

Mahajan, J.M.; Raman, N.V.; Massand, O.P.

1997-01-01

Radiation Standards and Instrumentation Division (RS and ID) conducts country wide personnel monitoring service for external exposures of a total of about 41,000 radiation workers. Out of these, there are about 5300 radiation workers in industrial institutions alone. The analysis of overexposure cases (more than 10 mSv during a monitoring period) of these radiation workers has been presented for the period 1991-1995. The paper describes how the reporting, investigations and follow-up of these cases helps in obtaining effective control of doses to the radiation workers in the country keeping in view the dose limits stipulated by the Atomic Energy Regulatory Board. (author)

Why Workers Are Reluctant Learners: The Case of the Canadian Pulp and Paper Industry.

Science.gov (United States)

Bratton, John A.

2001-01-01

In the Canadian pulp/paper industry, management is focused on worker flexibility for productivity. Unions view workplace learning as a threat to job control and security. Although learning new skills enhances individual workers' flexibility and employability, collectively it weakens the union through job losses. (Contains 56 references.) (SK)

Decent Work in the Chinese Apparel Industry: Comparative Analysis of Blue-Collar and White-Collar Garment Workers

Directory of Open Access Journals (Sweden)

Caixia Chen

2017-08-01

Full Text Available Addressing labor issues in the apparel industry is significantly important due to customers’ increasing awareness of poor working conditions and growing labor crises in apparel production locations worldwide. Decent work is a key element to achieving fair and harmonious employment, but is not always evident in global apparel production networks. This study examines the working conditions in China’s garment manufacturing industry, which employs more than 10 million workers. A survey was administered to 313 blue-collar workers and 228 white-collar workers on issues related to decent work, including workers’ concerns, satisfaction levels and attitudes towards decent work. Regression analysis showed that workers’ attitudes are significantly related to age, education level, service length and monthly wage. Gap analysis revealed poor understanding of decent work and low satisfaction with primary indicators of decent work. However, results suggest that workers increasingly value soft factors and the overall work experience, not only financial benefits. Cluster analysis identified four clusters of workers. This study contributes to understanding garment worker perceptions of decent work and provides implications for the operationalization of decent work in China’s garment manufacturing industry.

Bioremediation of coractive blue dye by using Pseudomonas spp. isolated from the textile dye wastewater

Science.gov (United States)

Sunar, N. M.; Mon, Z. K.; Rahim, N. A.; Leman, A. M.; Airish, N. A. M.; Khalid, A.; Ali, R.; Zaidi, E.; Azhar, A. T. S.

2018-04-01

Wastewater released from the textile industry contains variety substances, mainly dyes that contains a high concentration of color and organic. In this study the potential for bacterial decolorization of coractive blue dye was examined that isolated from textile wastewater. The optimum conditions were determined for pH, temperature and initial concentration of the dye. The bacteria isolated was Pseudomonas spp. The selected bacterium shows high decolorization in static condition at an optimum of pH 7.0. The Pseudomonas spp. could decolorize coractive blue dye by 70% within 24 h under static condition, with the optimum of pH 7.0. Decolorization was confirmed by using UV-VIS spectrophotometer. This present study suggests the potential of Pseudomonas spp. as an approach in sustainable bioremediation that provide an efficient method for decolorizing coractive blue dye.

Workers' compensation claims for musculoskeletal disorders among wholesale and retail trade industry workers--Ohio, 2005-2009.

Science.gov (United States)

2013-06-07

Work-related musculoskeletal disorders (WMSDs) resulting from ergonomic hazards are common in the United States. Recent data from the Bureau of Labor Statistics (BLS) indicate that in 2011, one third of occupational injuries and illnesses resulting in lost time from work were WMSDs. Based on data from the 2010 BLS Survey of Occupational Injuries and Illnesses, a higher rate of WMSDs resulting in lost time from work occurred in the Wholesale and Retail Trade (WRT) industry compared with most other industries. To assess trends and identify WRT subsectors and subgroups associated with high rates of WMSD workers' compensation claims, the Ohio Bureau of Workers' Compensation (OBWC) and CDC analyzed OBWC claims data for single-location WRT employers in Ohio for the period 2005-2009. From 2005 to 2009, the rate of WMSD claims declined from 86.3 to 52.8 per 10,000 employees. The three WRT industry subsectors with the highest rates of WMSD claims were Merchant Wholesalers, Nondurable Goods; Furniture and Home Furnishings Stores; and Merchant Wholesalers, Durable Goods. Within those three WRT subsectors, the highest rates of WMSD claims were noted in five subgroups: furniture stores and wholesalers of alcoholic beverages, groceries and related products, metal and minerals, and motor vehicle parts. Providing recommendations for WMSD prevention is particularly important for these WRT subgroups.

Prevalence of undiagnosed cardiovascular risk factors and 10-year CVD risk in male steel industry workers.

Science.gov (United States)

Gray, Benjamin J; Bracken, Richard M; Turner, Daniel; Morgan, Kerry; Mellalieu, Stephen D; Thomas, Michael; Williams, Sally P; Williams, Meurig; Rice, Sam; Stephens, Jeffrey W

2014-05-01

To assess the prevalence of undiagnosed cardiovascular disease (CVD) in a cohort of male steelworkers in South Wales, UK. Male steel industry workers (n = 221) with no prior diagnosis of CVD or diabetes accepted a CVD risk assessment within the work environment. Demographic, anthropometric, family, and medical histories were all recorded and capillary blood samples obtained. The 10-year CVD risk was predicted using the QRISK2-2012 algorithm. Up to 81.5% of workers were either overweight or obese. More than 20% of workers were found to have diastolic hypertension, high total cholesterol, and/or a total cholesterol/high-density lipoprotein ratio of six or more. Over one quarter of workers assessed had an increased 10-year CVD risk. Despite a physically demanding occupation, risk assessment in the workplace uncovered significant occult factors in CVD risk in a sample of male heavy industry workers.

[Investigation about prevention behavior for dust workers in machinery, ceramic, and metallurgy industry].

Science.gov (United States)

Shen, Fu-hai; Ma, Qing-kun; Xiao, Shu-yu; Cui, Feng-tao; Meng, Qing-di; Yang, Xiu-qing; Qi, Hui-sheng; Fan, Xue-yun; Yao, San-qiao

2011-01-01

The purposes of this thesis were to study the behavior about workers exposed to dust and provide scientific basis for health promotion. We designed a questionnaire and carry it on the 746 dust workers in the 3 representative corporations of Machinery, Ceramic, and Metallurgy Industry. All data were input into computer. And a database was established with Excel. SPSS11.5 statistical analysis software was used to analyze the influence on protecting behavioral between the application of qualifications, different jobs, training or protection, and other aspects etc. The rates were 94.4% and 75.3% about the regular physical examination and requirements for protective equipment. The rate of choosing an effective way of protection was generally low (15.4%). There was significant difference for among different educational background workers (P Metallurgy Industry. Those who were not educated had a lower using rate about the protection behavior, regular physical examination, and requirements for protective equipment than those educated.

Dyeing Industry Effluent System as Lipid Production Medium of Neochloris sp. for Biodiesel Feedstock Preparation

Directory of Open Access Journals (Sweden)

Vidyadharani Gopalakrishnan

2014-01-01

Full Text Available Microalgae lipid feedstock preparation cost was an important factor in increasing biodiesel fuel hikes. This study was conducted with the concept of implementing an effluent wastewater as lipid production medium for microalgae cultivation. In our study textile dyeing industry effluent was taken as a lipid production medium for Neochloris sp. cultivation. The changes in physicochemical analysis of effluent before and after Neochloris sp. treatment were recorded using standard procedures and AAS analysis. There was especially a reduction in heavy metal like lead (Pb concentration from 0.002 ppm to 0.001 ppm after Neochloris sp. treatment. Neochloris sp. cultivated in Bold Basal Medium (BBM (specific algal medium produced 41.93% total lipid and 36.69% lipid was produced in effluent based cultivation. Surprisingly Neochloris sp. cultivated in effluent was found with enhanced neutral lipid content, and it was confirmed by Nile red fluorescence assay. Further the particular enrichment in oleic acid content of the cells was confirmed with thin layer chromatography (TLC with oleic acid pure (98% control. The overall results suggested that textile dyeing industry effluent could serve as the best lipid productive medium for Neochloris sp. biodiesel feedstock preparation. This study was found to have a significant impact on reducing the biodiesel feedstock preparation cost with simultaneous lipid induction by heavy metal stress to microalgae.

Participatory ergonomics in redesigning a dyeing tub for fabric dyers.

Science.gov (United States)

Parimalam, P; Premalatha, M R; Padmini, D S; Ganguli, A K

2012-01-01

The 'saree' worn by women in India and many South Asian countries is dyed using a tub, usually in small scale units employing low capital and a small number of workers. While using these tubs, workers adopt awkward postures over long periods of time which results in severe discomfort in the neck, shoulders and lower extremities. The purpose of the study was to redesign the dyeing tub using a participatory approach and to study the impact of the newly designed tub on the reported body discomfort and rate of production. Redesigning of the dyeing tub was carried out using three parallel participative processes--(1) eliciting the views of workers who use the tub, (2) interacting with the proprietors of the small scale dyeing units (the employers) and the tub manufacturers, and (3) iterative prototype tub development based on inputs from the first two processes. These processes facilitated involvement of the stake-holders and the acceptance of change. The final prototype was tested by nine workers for a period of three months to evaluate the reduction in body discomfort and increase in rate of production (output). Studies on the impact of the new tub showed a reduction in discomfort level from 'severe' to 'moderate', and a mean increase of 7.9% in the output, confirming the benefits of the participative approach to ergonomics intervention. The involvement, trust and credibility generated by the participative process facilitated the acceptance of the final design.

Political consciousness and political action of industrial workers in Ghana : a case study of VALCO workers at Tema

NARCIS (Netherlands)

Konings, P.J.J.

1978-01-01

What is the political consciousness of Ghanaian workers in large-scale foreign and state enterprises and what action have they engaged in? The present study, based on fieldwork in Ghana in 1975, attempts to answer these questions with regard to answer these questions with regard to industrial

Chlorine disinfection of dye wastewater: Implications for a commercial azo dye mixture

International Nuclear Information System (INIS)

Vacchi, Francine Inforçato; Albuquerque, Anjaina Fernandes; Vendemiatti, Josiane Aparecida; Morales, Daniel Alexandre; Ormond, Alexandra B.; Freeman, Harold S.; Zocolo, Guilherme Julião; Zanoni, Maria Valnice Boldrin; Umbuzeiro, Gisela

2013-01-01

Azo dyes, the most widely used family of synthetic dyes, are often employed as colorants in areas such as textiles, plastics, foods/drugs/cosmetics, and electronics. Following their use in industrial applications, azo dyes have been found in effluents and various receiving waters. Chemical treatment of effluents containing azo dyes includes disinfection using chlorine, which can generate compounds of varying eco/genotoxicity. Among the widely known commercial azo dyes for synthetic fibers is C.I. Disperse Red 1. While this dye is known to exist as a complex mixture, reports of eco/genotoxicity involve the purified form. Bearing in mind the potential for adverse synergistic effects arising from exposures to chemical mixtures, the aim of the present study was to characterize the components of commercial Disperse Red 1 and its chlorine-mediated decoloration products and to evaluate their ecotoxicity and mutagenicity. In conducting the present study, Disperse Red 1 was treated with chlorine gas, and the solution obtained was analyzed with the aid of LC–ESI-MS/MS to identify the components present, and then evaluated for ecotoxicity and mutagenicity, using Daphnia similis and Salmonella/microsome assays, respectively. The results of this study indicated that chlorination of Disperse Red 1 produced four chlorinated aromatic compounds as the main products and that the degradation products were more ecotoxic than the parent dye. These results suggest that a disinfection process using chlorine should be avoided for effluents containing hydrophobic azo dyes such commercial Disperse Red 1. -- Highlights: ► Aqueous solutions of Disperse Red 1 were treated with chlorine. ► The chlorination products of Disperse Red 1 were identified using LC–ESI-MS/MS. ► Daphnia and Salmonella/microsome were employed for eco/genotoxicity testing. ► The chlorinated dye was more mutagenic than the dye itself. ► Chlorination should be avoided in effluents containing azo-dyes.

Changing gender roles and health impacts among female workers in export-processing industries in Sri Lanka.

Science.gov (United States)

Attanapola, Chamila T

2004-06-01

Since the economic liberalization in 1977, a large number of Sri Lankan women have entered the labour market and engaged in income-generating activities. Some women choose to travel abroad as domestic workers, while others choose to work in export-processing industries. This process has a profound impact on gender and gender roles in Sri Lanka. Young rural women have changed their traditional women's roles to become independent daughters, efficient factory workers and partially modernized women. Even though changing gender roles are identified as a positive impact of industrial work, the new social, cultural, and legal environments of industrial work have negative impacts on these women's lives. This paper explores health impacts of changing gender roles and practices of young rural women, focusing on the experiences of female workers in export-processing industries. Further, it contributes to the literature on gender and health, and on qualitative approaches within health geographic studies. A model is formulated to suggest a conceptual framework for studying women's health. The model describes the determinant factors of individual health status based on the question of who (personal attributes) does what (type of work) where (place), when and how (behaviours). These are also determinant factors of gender and gender roles of a society. The three types of health problems (reproductive, productive and mental health) of a woman, in this case a female industrial worker, are determined by her gender roles and practices associated with these roles.

Application of natural dyes in textile industry and the treatment of dye solutions using electrolytic techniques

OpenAIRE

Abouamer, Karima Massaud

2008-01-01

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 25/02/2008. Anodic oxidation of a commercial dye, methylene blue (MB), from aqueous solutions using an electrochemical cell is reported. Data are provided on the effects of eight different types of supporting electrolytes, concentration of electrolytes, initial dye concentration, current and electrolytic time on the percentage removal of methylene blue. Anodic oxidation was found to be effect...

Technological changes illustrated by the coal tar and tar dye industry; Die Wandlung der Technik am Beispiel der Steinkohlenteer- und Teerfarben-Chemie

Energy Technology Data Exchange (ETDEWEB)

Collin, G. [Deutsche Gesellschaft fuer Chemisches Apparatewesen, Chemische Technik und Biotechnologie e.V. (DECHEMA), Frankfurt am Main (Germany)

2001-05-01

Coal tar was detected in the 17th century in laboratory experiments based on empirical knowledge. In the 18th century industrial revolution, coal tar was an undesired by-product of iron production and coking plants. It was first used in the 19th century for impregnating railway sleepers. Later developments in atomic theory, new chemical symbols and organic element analysis provided the basis for discovering and chemical characterisation of coal tar constituents. Laboratory experiments with these tar constituents resulted in the first synthetic dyes, the postulation of tetravalent carbon and the resulting structural theory in organic chemistry for systematic synthesis of many tar dyes to substitute natural dyes in the textile industry. The technical application of these syntheses was part 2 of the industrial revolution and the foundation of the chemical industry in Germany, which developed rapidly in the 2nd half of the 19th century. Tar dye chemistry has made a significant contribution to Germany's economic growth and the change from an agricultural to an industrialized country. [German] Die Entdeckung des Steinkohlenteers im 17. Jahrhundert basiert auf durch Erfahrungswissen gepraegten Laboratoriumsexperimenten. Im Verlauf der 'Industriellen Revolution' des 18. Jahrhunderts ist der Steinkohlenteer zunaechst ein laestiges Abfallprodukt der Eisengewinnung im Kokshochofen und der Leuchtgasherstellung durch Kohlenverkokung. Erste technische Applikation finden Steinkohlenteeroele im 19. Jahrhundert durch den Eisenbahnbau zur Langzeit-Konservierung der dafuer benoetigten Holzschwellen. Die wissenschaftlichen Erfkenntnisse zur Atomtheorie, eine neue chemische Zeichensprache und die organische Elementaranalyse werden Voraussetzungen zur Entdeckung und chemischen Charakterisierung der Hauptinhaltsstoffe des Steinkohlenteers. Laboratoriumsexperimente mit den entdeckten Teerinhaltsstoffen fuehren zur Erfindung der ersten synthetischen Farbstoffe, die

Health risk assessment of volatile organic compounds exposure near Daegu dyeing industrial complex in South Korea.

Science.gov (United States)

Shuai, Jianfei; Kim, Sunshin; Ryu, Hyeonsu; Park, Jinhyeon; Lee, Chae Kwan; Kim, Geun-Bae; Ultra, Venecio U; Yang, Wonho

2018-04-20

Studying human health in areas with industrial contamination is a serious and complex issue. In recent years, attention has increasingly focused on the health implications of large industrial complexes. A variety of potential toxic chemicals have been produced during manufacturing processes and activities in industrial complexes in South Korea. A large number of dyeing industries gathered together in Daegu dyeing industrial complex. The residents near the industrial complex could be often exposed to volatile organic compounds. This study aimed to evaluate VOCs levels in the ambient air of DDIC, to assess the impact on human health risks, and to find more convincing evidences to prove these VOCs emitted from DDIC. According to deterministic risk assessment, inhalation was the most important route. Residential indoor, outdoor and personal exposure air VOCs were measured by passive samplers in exposed area and controlled area in different seasons. Satisfaction with ambient environments and self-reported diseases were also obtained by questionnaire survey. The VOCs concentrations in exposed area and controlled area was compared by t-test. The relationships among every VOC were tested by correlation. The values of hazard quotient (HQ) and life cancer risk were estimated. The concentrations of measured VOCs were presented, moreover, the variety of concentrations according the distances from the residential settings to the industrial complex site in exposed area. The residential indoor, outdoor, and personal exposure concentrations of toluene, DMF and chloroform in exposed area were significantly higher than the corresponding concentrations in controlled area both in summer and autumn. Toluene, DMF, chloroform and MEK had significantly positive correlations with each other in indoor and outdoor, and even in personal exposure. The HQ for DMF exceeded 1, and the life cancer risk of chloroform was greater than 10 - 4 in exposed area. The prevalence of respiratory diseases

Degradation of selected industrial dyes using Mg-doped TiO2 polyscales under natural sun light as an alternative driving energy

Science.gov (United States)

Shivaraju, H. P.; Midhun, G.; Anil Kumar, K. M.; Pallavi, S.; Pallavi, N.; Behzad, Shahmoradi

2017-11-01

Designing photocatalytic materials with modified functionalities for the utilization of renewable energy sources as an alternative driving energy has attracted much attention in the area of sustainable wastewater treatment applications. Catalyst-assisted advanced oxidation process is an emerging treatment technology for organic pollutants and toxicants in industrial wastewater. Preparation of visible-light-responsive photocatalyst such as Mg-doped TiO2 polyscales was carried out under mild sol-gel technique. Mg-doped TiO2 polyscales were characterized by powder XRD, SEM, FTIR, and optical and photocatalytic activity techniques. The Mg-doped TiO2 showed a mixed phase of anatase and rutile with an excellent crystallinity, structural elucidations, polyscales morphology, consequent shifting of bandgap energy and adequate photocatalytic activities under visible range of light. Mg-doped TiO2 polyscales were investigated for their efficiencies in the degradation of most commonly used industrial dyes in the real-time textile wastewater. Mg-doped TiO2 polyscales showed excellent photocatalytic degradation efficiency in both model industrial dyes (65-95%) and textile wastewater (92%) under natural sunlight as an alternative and renewable driving energy.

Graphene oxide based CdSe photocatalysts: Synthesis, characterization and comparative photocatalytic efficiency of rhodamine B and industrial dye

International Nuclear Information System (INIS)

Ghosh, Trisha; Lee, Jeong-Ho; Meng, Ze-Da; Ullah, Kefayat; Park, Chong-Yeon; Nikam, Vikram; Oh, Won-Chun

2013-01-01

Highlights: ► CdSe–graphene is synthesized by hydrothermal method. ► Three molar solutions of CdSe were used making three different composites. ► RhB and Texbrite MST-L were used as sample dye solutions. ► Texbrite MST-L is photo degraded in visible light. ► UV-spectroscopic analysis was done to measure degradation. - Abstract: CdSe–graphene composites were prepared using simple “hydrothermal method” where the graphene surface was modified using different molar solutions of cadmium selenide (CdSe) in aqueous media. The characterization of CdSe–graphene composites were studied by X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscope (SEM), and with transmission electron microscope (TEM). The catalytic activities of CdSe-composites were evaluated by degradation of rhodamine B (RhB) and commercial industrial dye “Texbrite MST-L (TXT-MST)” with fixed concentration. The degradation was observed by the decrease in the absorbance peak studied by UV spectrophotometer. The decrease in the dye concentration indicated catalytic degradation effect by CdSe–graphene composites

The health and safety concerns of immigrant women workers in the Toronto sportswear industry.

Science.gov (United States)

Gannagé, C M

1999-01-01

Immigrant women's conditions of work have worsened with new government and managerial strategies to restructure the Canadian apparel industry. Changes in occupational health and safety legislation have both given and taken away tools that immigrant women workers could use to improve the quality of their working lives. The author outlines a methodology for eliciting the health and safety concerns of immigrant women workers.

Musculoskeletal problems among workers in a garment industry, at Tirupur, Tamil Nadu

Directory of Open Access Journals (Sweden)

Sreesupria Purushothaman Ravichandran

2016-09-01

Full Text Available Background: Every occupation has its own ill effects on health. Garment workers are denied of their basic rights and less importance is given to their health. Their health status also depends on their access to treatment and availability of healthcare facilities. Aims & Objectives: To estimate the prevalence, health seeking pattern and associated factors for musculoskeletal problems among garment workers and to assess the level of exposure of individual workers to upper limb musculoskeletal loads. Materials and methods: A cross sectional study was conducted among 380 workers in a garment industry, at Tirupur over a period of two months. Interview was conducted using a structured pretested questionnaire including Nordic Musculoskeletal Questionnaire and Numerical Pain Rating Scale. Level of exposure to musculoskeletal load was assessed using RULA tool. Statistical analysis was done using SPSS 19 version. Results: 77.6% of the workers had musculoskeletal problems. The most common sites affected were neck (32.1%, knee (28.7% and low back (26.6%. More than half of the workers experienced moderate pain in all body parts. 54.2% sought health care and 40% among them preferred government hospital. Only 8.7% workers had acceptable posture. Conclusion: Health problems among garment workers are one of the areas of public health concern in our country. Reducing the work strain and providing a supportive workplace environment will have a favorable impact on work productivity

Different techniques recently used for the treatment of textile dyeing effluents: a review

International Nuclear Information System (INIS)

Altaf, A.; Noor, S.; Sharif, Q.M.; Najeebullah, M.

2010-01-01

Industrial textile processing comprises the operation of pretreatment dyeing printing and finishing. These production processes produce a substantial amount of chemical pollution. Textile finishing's wastewater, especially dye house effluent, contain different classes of organic dyes, chemicals and auxiliaries. They are colored and have extreme pH, COD and BOD values, and contain different salts, surfactants heavy metals and mineral oils. Therefore, dye bath effluents have to be treated before being discharge into the environment or municipal wastewater reservoir. This paper presents the review of different techniques currently used for the treatment of textile effluent, which are based on carbon adsorption, filtration, chemical precipitation, photo degradation, biodegradation and electrolytic chemical treatment. Membrane Technology has also been applied with the objective of recovering dyes and water. Biological processes could be adopted as a pretreatment decolorization step, combined with conventional treatment system (eg. coagulation flocculation, adsorption on activated carbon) to reduce the COD and BOD, an effective alternative for use by the textile dyeing industries. Electrochemical oxidation is an efficient process for the removal of colour and total organic carbon in reactive dyes textile wastewater. The ozonation is effective for decolorization of several dyes of different classes. Practical application of this process is feasible by treating industrial textile effluent after biological treatment. Processes using membranes technique, very interesting possibilities of separating hydrolyzed dyestuffs, dyeing auxiliaries and reuse treated wastewater in different finishing operation of textile industries. (author)

Reproductive Hazards Still Persist in the Microelectronics Industry: Increased Risk of Spontaneous Abortion and Menstrual Aberration among Female Workers in the Microelectronics Industry in South Korea

Science.gov (United States)

Kim, Inah; Kim, Myoung-Hee; Lim, Sinye

2015-01-01

Objectives Despite the global expansion of supply chains and changes to the production process, few studies since the mid-1990s and 2000s have examined reproductive risks of the microelectronics industry; we examined the reproductive risks among female microelectronics workers in South Korea. Methods Based on claim data from the National Health Insurance (2008–2012), we estimated age-specific rates of spontaneous abortion (SAB) and menstrual aberration (MA) among women aged 20 to 39 years. We compared data between microelectronics workers and three different control groups: economically inactive women, the working population as a whole, and workers employed in the bank industry. For an effect measure, age-stratified relative risks (RRs) were estimated. Results Female workers in the microelectronics industry showed significantly higher risk for SAB and MA compared to control groups. The RRs for SAB with reference to economically inactive women, working population, and bank workers in their twenties were 1.57, 1.40, and 1.37, respectively, and the RRs for MA among females in their twenties were 1.54, 1.38, and 1.48, respectively. For women in their thirties, RRs for SAB were 1.58, 1.67, and 1.13, and those for MA were 1.25, 1.35, and 1.23 compared to the three control populations, respectively. All RRs were statistically significant at a level of 0.05, except for the SAB case comparison with bank workers in their thirties. Conclusions Despite technical innovations and health and safety measures, female workers in microelectronics industry in South Korea have high rates of SAB and MA, suggesting continued exposure to reproductive hazards. Further etiologic studies based on primary data collection and careful surveillance are required to confirm these results. PMID:25938673

Reproductive Hazards Still Persist in the Microelectronics Industry: Increased Risk of Spontaneous Abortion and Menstrual Aberration among Female Workers in the Microelectronics Industry in South Korea.

Directory of Open Access Journals (Sweden)

Inah Kim

Full Text Available Despite the global expansion of supply chains and changes to the production process, few studies since the mid-1990 s and 2000s have examined reproductive risks of the microelectronics industry; we examined the reproductive risks among female microelectronics workers in South Korea.Based on claim data from the National Health Insurance (2008-2012, we estimated age-specific rates of spontaneous abortion (SAB and menstrual aberration (MA among women aged 20 to 39 years. We compared data between microelectronics workers and three different control groups: economically inactive women, the working population as a whole, and workers employed in the bank industry. For an effect measure, age-stratified relative risks (RRs were estimated.Female workers in the microelectronics industry showed significantly higher risk for SAB and MA compared to control groups. The RRs for SAB with reference to economically inactive women, working population, and bank workers in their twenties were 1.57, 1.40, and 1.37, respectively, and the RRs for MA among females in their twenties were 1.54, 1.38, and 1.48, respectively. For women in their thirties, RRs for SAB were 1.58, 1.67, and 1.13, and those for MA were 1.25, 1.35, and 1.23 compared to the three control populations, respectively. All RRs were statistically significant at a level of 0.05, except for the SAB case comparison with bank workers in their thirties.Despite technical innovations and health and safety measures, female workers in microelectronics industry in South Korea have high rates of SAB and MA, suggesting continued exposure to reproductive hazards. Further etiologic studies based on primary data collection and careful surveillance are required to confirm these results.

Reproductive Hazards Still Persist in the Microelectronics Industry: Increased Risk of Spontaneous Abortion and Menstrual Aberration among Female Workers in the Microelectronics Industry in South Korea.

Science.gov (United States)

Kim, Inah; Kim, Myoung-Hee; Lim, Sinye

2015-01-01

Despite the global expansion of supply chains and changes to the production process, few studies since the mid-1990 s and 2000s have examined reproductive risks of the microelectronics industry; we examined the reproductive risks among female microelectronics workers in South Korea. Based on claim data from the National Health Insurance (2008-2012), we estimated age-specific rates of spontaneous abortion (SAB) and menstrual aberration (MA) among women aged 20 to 39 years. We compared data between microelectronics workers and three different control groups: economically inactive women, the working population as a whole, and workers employed in the bank industry. For an effect measure, age-stratified relative risks (RRs) were estimated. Female workers in the microelectronics industry showed significantly higher risk for SAB and MA compared to control groups. The RRs for SAB with reference to economically inactive women, working population, and bank workers in their twenties were 1.57, 1.40, and 1.37, respectively, and the RRs for MA among females in their twenties were 1.54, 1.38, and 1.48, respectively. For women in their thirties, RRs for SAB were 1.58, 1.67, and 1.13, and those for MA were 1.25, 1.35, and 1.23 compared to the three control populations, respectively. All RRs were statistically significant at a level of 0.05, except for the SAB case comparison with bank workers in their thirties. Despite technical innovations and health and safety measures, female workers in microelectronics industry in South Korea have high rates of SAB and MA, suggesting continued exposure to reproductive hazards. Further etiologic studies based on primary data collection and careful surveillance are required to confirm these results.

Exposure to occupational air pollution and cardiac function in workers of the Esfahan Steel Industry, Iran.

Science.gov (United States)

Golshahi, Jafar; Sadeghi, Masoumeh; Saqira, Mohammad; Zavar, Reihaneh; Sadeghifar, Mostafa; Roohafza, Hamidreza

2016-06-01

Air pollution is recognized as an important risk factor for cardiovascular disease. We investigated association of exposure to occupational air pollution and cardiac function in the workers of the steel industry. Fifty male workers of the agglomeration and coke-making parts of the Esfahan Steel Company were randomly selected (n = 50). Workers in the administrative parts were studied as controls (n = 50). Those with known history of hypertension, dyslipidemia, or diabetes, and active smokers were not included. Data of age, body mass index, employment duration, blood pressure, fasting blood sugar, and lipid profile were gathered. Echocardiography was performed to evaluate cardiac function. Left ventricular ejection fraction was lower in workers of the agglomeration/coke-making parts than in controls (mean difference = 5 to 5.5 %, P steel industry is associated with left heart systolic dysfunction. Possible right heart insults due to air pollution exposure warrant further investigations.

German robots: The impact of industrial robots on workers

OpenAIRE

Dauth, Wolfgang; Findeisen, Sebastian; Südekum, Jens; Wößner, Nicole

2017-01-01

We study the impact of rising robot exposure on the careers of individual manufacturing workers, and the equilibrium impact across industries and local labor markets in Germany. We find no evidence that robots cause total job losses, but they do affect the composition of aggregate employment. Every robot destroys two manufacturing jobs. This accounts for almost 23 percent of the overall decline of manufacturing employment in Germany over the period 1994-2014, roughly 275,000 jobs. But this lo...

Determination of the phthalocyanine textile dye, reactive turquoise blue, by electrochemical techniques

Directory of Open Access Journals (Sweden)

Osugi Marly E.

2003-01-01

Full Text Available Turquoise blue 15 (AT15 is a reactive dye widely used in the textile industry to color natural fibers. The presence of these dyes in effluent and industrial wastewater is of considerable interest due ecotoxicological and environmental problems. The electrochemical reduction of this dye has been investigated in aqueous solution using cyclic voltammetry, controlled potential electrolysis and cathodic stripping voltammetry. Optimum conditions for dye discoloration by controlled potential electrolysis use an alkaline medium. Using cathodic stripping voltammetry a linear calibration graph was obtained from 5.00x10-8 mol L-1 to 1.00x10-6 mol L-1 of AT15 at pH 4.0, using accumulation times of 180 and 240 s and an accumulation potential of 0.0 V. The proposed method was applied in direct determination of the dye in tap water and in textile industry effluent.

Estimation of hand index for male industrial workers of Haryana State

African Journals Online (AJOL)

Hand index derived from measured hand dimensions can be used to estimate differences related to sex, age and race in forensic and legal sciences. It has been calculated as percentage of hand breadth over the hand length; which suggests that the male industrial workers population of state belong to mesocheir group of ...

Older Workers in the Hospitality Industry: Valuing Experience and Informal Learning

Science.gov (United States)

Canning, Roy

2011-01-01

The research sets out to identify the learning processes adopted by older workers in the hospitality and visitor attraction industry in Scotland, with a view to determining how employers may better support their education and training within enterprises. The study was undertaken as part of the ESRC project on "Sustaining the employability of…

Comparison of Safety Perception between Foreign and Local Workers in the Construction Industry in Republic of Korea

Directory of Open Access Journals (Sweden)

Serdar Korkmaz

2018-03-01

Full Text Available Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001 and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05 and foreign workers (F = 7.868, p < 0.05. In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of 0.428** for Korean and 0.148 for foreign workers between two items – namely, “management's commitment to safety” and “blaming staff when they make mistakes” – support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers. Keywords: construction, foreign workers, Korean workers, safety perception

Risk Perception, Knowledge and Safety Attitude and Hearing Protector Use in Petrochemical Industry Workers

Directory of Open Access Journals (Sweden)

Mahdi Jahangiri

2008-06-01

Full Text Available Background and Aim: Hearing protectors (HP are widely employed as the only measure against noise exposure. However, it is well known that unless do workers wear HP continuously, its efficacy will be very low. The purpose of this study was to determine the influence of risk perception, knowledge and safety attitude on hearing protection use in petrochemical industry's workers.Materials and Methods: In this cross-sectional study a structural questionnaire was administrated to 236 randomly selected workers in Iranian petrochemical industry who had been to 85 dBA noise and some influencing factors including risk perception, knowledge and general attitude to safety on using of HP had been investigated.Results: This study showed that only 20.3% of employees claimed to wear hearing protection all the time when they exposed to noise. There was a significant relationship between use of hearing protector and worker's risk perception (p=0.048 and also their knowledge about hearing protection(p=0.009. Also, the relationship between general attitude of workers to safety and risk perception was statistically significant (p=0.046. Conclusion: The results of the study showed that for promoting the use of hearing protectors, two main strategy should be followed. First, removing the barriers to make hearing protectors compliant, and second enhancing the workers’ risk perception about hearing loss and proper use of ear protectors.

Removal of rhodamine B (a basic dye) and thoron (an acidic dye) from dilute aqueous solutions and wastewater simulants by ion flotation.

Science.gov (United States)

Shakir, Kamal; Elkafrawy, Ahmed Faouzy; Ghoneimy, Hussein Fouad; Elrab Beheir, Shokry Gad; Refaat, Mamdoh

2010-03-01

The present work deals with removal, by ion flotation, of two dyes: a basic dye (rhodamine B (RB)) and an acidic one (thoron (TH)) from dilute aqueous solutions and simulated wastewaters. These dyes are widely used for analytical and biological staining purposes. Besides, RB is commonly used in dyeing of various industrial products. Therefore, wastewaters emanating from chemical and radiochemical laboratories, and biomedical and biological research laboratories may be contaminated with RB and TH. Ion flotation of these dyes has been investigated over a wide range of pH using the anionic surfactant, sodium lauryl sulfate (NaLS) and the cationic surfactant, cetyltrimethylammonium bromide (CTAB) as collectors. Successful removals could be achieved for RB and TH with the anionic collector, NaLS, and the cationic collector, CTAB, respectively. In addition to the effects of pH and type of collector on the efficiency of removal of each dye, the effects of collector and dye concentrations, frother dosage, ionic strength, bubbling time period and presence of foreign salts were investigated and the optimal removal conditions have been established. Removals exceeding 99.5 % and 99.9% could be achieved for RB and TH, respectively. The results obtained are discussed with respect to dissociation of dye, type of collector, ionic strength and sign and magnitude of charge of added foreign ions. Kinetics of flotation were also studied. Further studies demonstrate that under optimum conditions the developed flotation processes can be applied for the treatment of dye-contaminated wastewaters simulated to those generated at dyeing industries and radiochemical laboratories. Copyright 2009 Elsevier Ltd. All rights reserved.

20 CFR 404.1402 - When are railroad industry services by a non-vested worker covered under Social Security?

Science.gov (United States)

2010-04-01

...-vested worker covered under Social Security? 404.1402 Section 404.1402 Employees' Benefits SOCIAL... When are railroad industry services by a non-vested worker covered under Social Security? If you are a non-vested worker, we (the Social Security Administration) will consider your services in the railroad...

[Pulmonary disease due to asbestos in steel industry workers].

Science.gov (United States)

Zurbriggen, Rita; Capone, Lilian

2013-01-01

Asbestos-related diseases are caused by the inhalation of asbestos fibers in their variety chrysotile or white asbestos. Although the ban in Argentina dates from 2003, there are numerous industries where work continues with this mineral, including iron and steel industries. It is currently known the high pathogenicity of this material, so that in many countries there are programs to monitoring the exposed workers. Here we describe the general characteristics and pulmonary manifestations in 27 patients who had worked in a very huge steel factory in South America. The diagnosis of asbestos-related diseases was made by a medical-occupational record, history of asbestos exposure, additional studies of lung function and chest images. Then the sources of exposure (occupational, domestic and environmental), exposure time and latency period were analyzed, in those patients in whom a related disease was detected. Smoking history was also taken into account. Twenty-two patients had benigns pathologies (81.4%), sixteen of them with lesions localyzed in pleura, and other six pulmonary asbestosis. The malignant pathologies occurred in five patients (18.5%), in four of them mesothelioma and in other one lung cancer. The problem of asbestos exposure has contemporary relevance. Hence the need for a surveillance program in workers exposed to asbestos in the past or currently, to detect, report, record and investigate the characteristics of these pathologies.

Biotreatment of anthraquinone dye Drimarene Blue K 2 RL | Siddiqui ...

African Journals Online (AJOL)

Drimarene Blue (Db) K2RL is a reactive anthraquinone dye, used extensively in textile industry, due to poor adsorbability to textile fiber; it has a higher exhaustion rate in wastewater. The dye is toxic, carcinogenic, mutagenic and resistant to degradation. Decolorization of this dye was studied in two different systems.

Chlorine disinfection of dye wastewater: Implications for a commercial azo dye mixture

Energy Technology Data Exchange (ETDEWEB)

Vacchi, Francine Inforcato; Albuquerque, Anjaina Fernandes; Vendemiatti, Josiane Aparecida; Morales, Daniel Alexandre [Faculdade de Tecnologia, Universidade Estadual de Campinas, Limeira, SP, 13484-332 (Brazil); Ormond, Alexandra B.; Freeman, Harold S. [Department of Textile Engineering, Chemistry, and Science, North Carolina State University, Raleigh, NC 27695-8301 (United States); Zocolo, Guilherme Juliao; Zanoni, Maria Valnice Boldrin [Departamento de Quimica Analitica, Universidade Estadual Paulista Julio de Mesquita Filho, Instituto de Quimica de Araraquara, Araraquara, SP 14801-970 (Brazil); Umbuzeiro, Gisela, E-mail: giselau@ft.unicamp.br [Faculdade de Tecnologia, Universidade Estadual de Campinas, Limeira, SP, 13484-332 (Brazil)

2013-01-01

Azo dyes, the most widely used family of synthetic dyes, are often employed as colorants in areas such as textiles, plastics, foods/drugs/cosmetics, and electronics. Following their use in industrial applications, azo dyes have been found in effluents and various receiving waters. Chemical treatment of effluents containing azo dyes includes disinfection using chlorine, which can generate compounds of varying eco/genotoxicity. Among the widely known commercial azo dyes for synthetic fibers is C.I. Disperse Red 1. While this dye is known to exist as a complex mixture, reports of eco/genotoxicity involve the purified form. Bearing in mind the potential for adverse synergistic effects arising from exposures to chemical mixtures, the aim of the present study was to characterize the components of commercial Disperse Red 1 and its chlorine-mediated decoloration products and to evaluate their ecotoxicity and mutagenicity. In conducting the present study, Disperse Red 1 was treated with chlorine gas, and the solution obtained was analyzed with the aid of LC-ESI-MS/MS to identify the components present, and then evaluated for ecotoxicity and mutagenicity, using Daphnia similis and Salmonella/microsome assays, respectively. The results of this study indicated that chlorination of Disperse Red 1 produced four chlorinated aromatic compounds as the main products and that the degradation products were more ecotoxic than the parent dye. These results suggest that a disinfection process using chlorine should be avoided for effluents containing hydrophobic azo dyes such commercial Disperse Red 1. -- Highlights: Black-Right-Pointing-Pointer Aqueous solutions of Disperse Red 1 were treated with chlorine. Black-Right-Pointing-Pointer The chlorination products of Disperse Red 1 were identified using LC-ESI-MS/MS. Black-Right-Pointing-Pointer Daphnia and Salmonella/microsome were employed for eco/genotoxicity testing. Black-Right-Pointing-Pointer The chlorinated dye was more mutagenic

Immobilized Lignin Peroxidase-Like Metalloporphyrins as Reusable Catalysts in Oxidative Bleaching of Industrial Dyes

Directory of Open Access Journals (Sweden)

Paolo Zucca

2016-07-01

Full Text Available Synthetic and bioinspired metalloporphyrins are a class of redox-active catalysts able to emulate several enzymes such as cytochromes P450, ligninolytic peroxidases, and peroxygenases. Their ability to perform oxidation and degradation of recalcitrant compounds, including aliphatic hydrocarbons, phenolic and non-phenolic aromatic compounds, sulfides, and nitroso-compounds, has been deeply investigated. Such a broad substrate specificity has suggested their use also in the bleaching of textile plant wastewaters. In fact, industrial dyes belong to very different chemical classes, being their effective and inexpensive oxidation an important challenge from both economic and environmental perspective. Accordingly, we review here the most widespread synthetic metalloporphyrins, and the most promising formulations for large-scale applications. In particular, we focus on the most convenient approaches for immobilization to conceive economical affordable processes. Then, the molecular routes of catalysis and the reported substrate specificity on the treatment of the most diffused textile dyes are encompassed, including the use of redox mediators and the comparison with the most common biological and enzymatic alternative, in order to depict an updated picture of a very promising field for large-scale applications.

Assessment of the Dyeing Properties of the Pigments Produced by Talaromyces spp.

OpenAIRE

Morales-Oyervides, Lourdes; Oliveira, Jorge; Sousa-Gallagher, Maria; Méndez-Zavala, Alejandro; Montañez, Julio Cesar

2017-01-01

The high production yields of pigments by Talaromyces spp. and their high thermal stability have implied that industrial application interests may emerge in the food and textile industries, as they both involve subjecting the colourants to high temperatures. The present study aimed to assess the potential application of the pigments produced by Talaromyces spp. in the textile area by studying their dyeing properties. Dyeing studies were performed on wool. The dyeing process consisted of three...

Assessment of Industrial Antimony Exposure and Immunologic Function for Workers in Taiwan.

Science.gov (United States)

Wu, Chin-Ching; Chen, Yi-Chun

2017-06-26

This study investigated antimony exposure among employees in industries in Taiwan and evaluated whether their immunologic markers were associated with antimony exposure. We recruited 91 male workers and 42 male office administrators from 2 glass manufacturing plants, 1 antimony trioxide manufacturing plants, and 2 engineering plastic manufacturing plants. Air samples were collected at worksites and administrative offices, and each participant provided specimens of urine, blood, and hair to assay antimony levels. We also determined white blood cells, lymphocyte, and monocyte, IgA, IgE, and IgG in blood specimens. The mean antimony concentration in the air measured at worksites was much higher in the antimony trioxide plant (2.51 ± 0.57 mg/m³) than in plastic plants (0.21 ± 0.06 mg/m³) and glass plants (0.14 ± 0.01 mg/m³). Antimony levels in blood, urine, and hair measured for participants were correlated with worksites and were higher in workers than in administrators. The mean serum IgG, IgA, and IgE levels were lower in workers than in administrators ( p industrial plants than for administrators. This study suggests serum IgG, IgA, and IgE levels are negatively associated with antimony exposure.

Dye film dosimetry for radiation processing

International Nuclear Information System (INIS)

Humphreys, J.C.; McLaughlin, W.L.

1981-01-01

Commercially available plastic films containing dyes or dye precursors are convenient dosimeters and imaging media for electron beams or photons used for industrial radiation processing. As ''grainless'' imaging systems having thicknesses down to a few micrometers, they provide high spatial resolution for determining detailed absorbed dose distributions through microdensitometric analysis. The radiation absorption properties of these systems are adjusted by changing film composition so that the dosimeter materials can be made to simulate the material of interest undergoing irradiation. Other advantages include long-term stability, dose-rate independence, and ease of use and calibration. Radiochromic dye films with thicknesses varying from 0.005 to 1 mm are presently used to monitor electron-beam or gamma-ray doses from 10 to 10 5 Gy (10 3 to 10 7 rad), typical of those encountered in medical applications, radiation curing of polymeric composites, wire and cable insulation, shrinkable plastic tubing and film, as well as sterilization of medical supplies and treatment of municipal and industrial wastes. An NBS calibration service to industry involves the traceability of standard 60 Co gamma ray absorbed dose measurements by means of these films employed as transfer standards

Hair cosmetics: dyes.

Science.gov (United States)

Guerra-Tapia, A; Gonzalez-Guerra, E

2014-11-01

Hair plays a significant role in body image, and its appearance can be changed relatively easily without resort to surgical procedures. Cosmetics and techniques have therefore been used to change hair appearance since time immemorial. The cosmetics industry has developed efficient products that can be used on healthy hair or act on concomitant diseases of the hair and scalp. Dyes embellish the hair by bleaching or coloring it briefly, for temporary periods of longer duration, or permanently, depending on the composition of a dye (oxidative or nonoxidative) and its degree of penetration of the hair shaft. The dermatologist's knowledge of dyes, their use, and their possible side effects (contact eczema, cancer, increased porosity, brittleness) can extend to an understanding of cosmetic resources that also treat hair and scalp conditions. Copyright © 2013 Elsevier España, S.L.U. and AEDV. All rights reserved.

Ischaemic heart disease mortality and years of work in trucking industry workers.

Science.gov (United States)

Hart, Jaime E; Garshick, Eric; Smith, Thomas J; Davis, Mary E; Laden, Francine

2013-08-01

Evidence from general population-based studies and occupational cohorts has identified air pollution from mobile sources as a risk factor for cardiovascular disease. In a cohort of US trucking industry workers, with regular exposure to vehicle exhaust, the authors previously observed elevated standardised mortality ratios for ischaemic heart disease (IHD) compared with members of the general US population. Therefore, the authors examined the association of increasing years of work in jobs with vehicle exhaust exposure and IHD mortality within the cohort. The authors calculated years of work in eight job groups for 30,758 workers using work records from four nationwide companies. Proportional hazard regression was used to examine relationships between IHD mortality, 1985-2000, and employment duration in each job group. HRs for at least 1 year of work in each job were elevated for dockworkers, long haul drivers, pick-up and delivery drivers, combination workers, hostlers, and shop workers. There was a suggestion of an increased risk of IHD mortality with increasing years of work as a long haul driver, pick-up and delivery driver, combination worker, and dockworker. These results suggest an elevated risk of IHD mortality in workers with a previous history of regular exposure to vehicle exhaust.

Dynamic Impact of Fluoride Dust on Industrial Workers in Thermal Power Plant and its Feasibility Study on Troposphere

Science.gov (United States)

Katiyar, Swati; Kumar, Pawan

2016-07-01

Fluorine is a common element that does not occur in the elemental state in nature because of its high reactivity. It accounts for about 0.3 g kg-1 of the Earth's crust and exists in the form of fluorides in a number of minerals, of which fluorspar, cryolite and fluorapatite are the most common. This paper focuses on the analysis of flouride on the industrial workers in various working conditions on troposphere. To check the impact of flouride on workers various samples were taken from different conditions of aluminum plant industries like pot room workers and non-pot room workers as fluoride has both beneficial and detrimental effects on human health. 50 workers in pot room and 10 workers in non pot room were chosen for taking urine and serum samples. 0.09 to 3.77 mg Kg -1 and 0.39 to 1.15 mg Kg-1 (of ash weight) was recorded in the nails of pot room and non pot room workers respectively. The average flouride content was recorded as 1.10 mg Kg -1 and 0.65 mg Kg -1 in pot room and non pot room workers respectively. The outcome results clearly indicated the ill effect and dangerous for the dental health as well as physical health of the workers. A preventive measure or precaution should be taken by the management or persons to avoid the impact of flouride on the body. The clinical significance lie in the maintaining hygienic condition while preventing the any possible effect of flouride on the workers of the industries, as this will affect the production as well as the human value in term of physical capabilities and social aspects in providing medical facilities. Keywords: Fluoride, Ecosystem, Dynamic impact, Air pollutant, detrimental effects.

Experimental Researches Regarding the Ecological Dyeing with Natural Extracts

Directory of Open Access Journals (Sweden)

Budeanu Ramona

2014-12-01

Full Text Available The concept of ‘environmental awareness’ has recently had a major impact on the textile industry and on the fashion world as well. In this context, the use of natural fibres and the development of natural dyeing processes gradually became important goals of the textile industry. Of all natural textile fibres, hemp is considered to be one of the strongest and most durable. A wide range of natural extracts have been used for natural textile coloration and dyeing. Dyes deriving from natural sources have emerged as an important alternative to synthetic dyes. Ecofriendly, nontoxic, sustainable and renewable natural dyes and pigments have been used for colouring the food substrate, leather, wood, natural fibres and fabrics from the dawn of human history. The purpose of the research is to obtain ecologically coloured fabrics for textiles by using a method of dyeing that relies on natural ingredients extracted from red beet, onion leaves and black tea. The experiments are conducted on three different types of hemp fabrics. This paper presents the results of the studies regarding the dyeing process of hemp fabrics with natural extracts, the colours of the dyed samples inspected with reflectance spectra and the CIE L*a*b* colour space measurements.

A strategy for improving worker satisfaction and job attitudes in a repetitive industrial task: application of production standards and performance feedback.

Science.gov (United States)

Shikdar, Ashraf A; Das, Biman

2003-04-15

Worker satisfaction improved significantly as a consequence of the provision of the assigned and participative standards with performance feedback in a repetitive industrial production task. The maximum improvement in worker satisfaction was found for the participative standard and feedback condition. Only this condition had a significant positive effect on worker job attitudes. Monetary incentive, when provided with an assigned or participative standard with feedback, added no incremental worker satisfaction or job attitudes gain. The participative standard with feedback condition emerges as the optimum strategy for improving worker satisfaction and job attitudes in a repetitive industrial production task.

Influence of dielectric barrier discharge treatment on mechanical and dyeing properties of wool

Science.gov (United States)

Rahul, NAVIK; Sameera, SHAFI; Md Miskatul, ALAM; Md Amjad, FAROOQ; Lina, LIN; Yingjie, CAI

2018-06-01

Physical and chemical properties of wool surface significantly affect the absorbency, rate of dye bath exhaustion and fixation of the industrial dyes. Hence, surface modification is a necessary operation prior to coloration process in wool wet processing industries. Plasma treatment is an effective alternative for physiochemical modification of wool surface. However, optimum processing parameters to get the expected modification are still under investigation, hence this technology is still under development in the wool wet processing industries. Therefore, in this paper, treatment parameters with the help of simple dielectric barrier discharge plasma reactor and air as a plasma gas, which could be a promising combination for treatment of wool substrate at industrial scale were schematically studied, and their influence on the water absorbency, mechanical, and dyeing properties of twill woven wool fabric samples are reported. It is expected that the results will assist to the wool coloration industries to improve the dyeing processes.

Mortality experience among Minnesota taconite mining industry workers.

Science.gov (United States)

Allen, Elizabeth M; Alexander, Bruce H; MacLehose, Richard F; Ramachandran, Gurumurthy; Mandel, Jeffrey H

2014-11-01

To evaluate the mortality experience of Minnesota taconite mining industry workers. Mortality was evaluated between 1960 and 2010 in a cohort of Minnesota taconite mining workers employed by any of the seven companies in operation in 1983. Standardised mortality ratios (SMR) were estimated by comparing observed deaths in the cohort with expected frequencies in the Minnesota population. Standardised rate ratios (SRR) were estimated using an internal analysis to compare mortality by employment duration. The cohort included 31,067 workers with at least 1 year of documented employment. Among those, there were 9094 deaths, of which 949 were from lung cancer, and 30 from mesothelioma. Mortality from all causes was greater than expected in the Minnesota population (SMR=1.04, 95% CI 1.02 to 1.04). Mortality from lung cancer and mesothelioma was higher than expected with SMRs of 1.16 for lung cancer (95% CI 1.09 to 1.23) and 2.77 for mesothelioma (95% CI 1.87 to 3.96). Other elevated SMRs included those for cardiovascular disease (SMR=1.10, 95% CI 1.06 to 1.14), specifically for hypertensive heart disease (SMR=1.81, 95% CI 1.39 to 2.33) and ischemic heart disease (SMR=1.11, 95% CI 1.07 to 1.16). Results of the SRR analysis did not show variation in risk by duration of employment. This study provides evidence that taconite workers may be at increased risk for mortality from lung cancer, mesothelioma, and some cardiovascular disease. Occupational exposures during taconite mining operations may be associated with these increased risks, but non-occupational exposures may also be important contributors. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Early occupational hearing loss of workers in a stone crushing industry: our experience in a developing country.

Science.gov (United States)

Kitcher, Emmanuel D; Ocansey, Grace; Tumpi, Daniel A

2012-01-01

Noise-induced hearing loss (NIHL) is an irreversible sensorineural hearing loss associated with exposure to high levels of excessive noise. This paper aims to assess the prevalence of early NIHL and the awareness of the effects of noise on health among stone crushing industry workers. This was a comparative cross-sectional study in Ghana of 140 workers from the stone crushing industry compared with a control group of 150 health workers. The stone workers and controls were evaluated using a structured questionnaire, which assessed symptoms of hearing loss, tinnitus, knowledge on the health hazards associated with work in noisy environment and the use of hearing protective device. Pure tone audiometric assessment was carried out for stone workers and controls. Noise levels at the work stations of the stone workers and of the controls were measured. Statistical Analysis of data was carried out using SPSS package version 16. The mean age of stone workers and controls was 42.58±7.85 and 42.19±12 years, respectively. Subjective hearing loss occurred in 21.5% of the workers and in 2.8% of the controls. Tinnitus occurred in 26.9% of stone workers and 21.5% of controls, while 87.5% stone workers had sound knowledge on the health hazards of a noisy environment. Early NIHL in the left ear occurred in 19.3% of the stone workers compared with 0.7% in controls and in the right ear, it occurred in 14.3% of the stone workers and in 1.3% of the controls; Pstone crushing workers is about 19.3% for the left ear and 14.3% for the right ear.

Photocatalytic transformation of dyes and by-products in the presence of hydrogen peroxide.

Science.gov (United States)

Subba Rao, K V; Subrahmanyam, M; Boule, P

2003-08-01

The efficiency of the photocatalytic degradation of dyes and dyeing industry pollutants on immobilized photocatalysts can be improved by addition of hydrogen peroxide, due to its photocatalytic decomposition on TiO2. Experiments were carried out with two azodyes, Acid Orange-7 (AO-7) and Tartrazine (Tart), with 3-nitrobenzenesulfonic add (3-NBSA) which is a chemical intermediate in the dye industry and with real industrial wastewaters, using a thin-film fixed bed reactor. The effect of hydrogen peroxide is only significant for concentrations higher than 5 x 10(-3) M (170 mg l(-1)).

Industrial Noise Pollution and its Impacts on Workers in the Textile Based Cottage Industries: An Empirical Study

Directory of Open Access Journals (Sweden)

Aitbar Ali Abbasi

2011-01-01

Full Text Available This study includes the research work which was carried out to investigate the range of difficulties faced by the workers and its effects on them while working in textile based cottage industries along with their causes. This research provides necessary tip-offs to solve those problems in a systematic way. Therefore, it was considered to know the number of machines (looms operated by one worker, number of machines in one unit and number of operators in one unit. The minimum and maximum noise levels were recorded by using digital sound level meter to compute average noise level/ unit. To identify the health problems like respiratory, hearing/listening, irritation, heart/BP, annoyance and headache faced by the workers, the survey was conducted. In present research work the minimum noise recorded was 101.6dB (A and maximum as 109.8dB (A, which was compared with OSHA and WHO (World Health Organization standards. Result of this study shows that due to high intensity of noise generated by looms and dusts at work places, workers were facing the mental and physical problems.

Industrial noise pollution and its impacts on workers in the textile based cottage industries: an empirical study

International Nuclear Information System (INIS)

Abbasi, A.A.; Marri, H.B.; Nebhwani, M.

2011-01-01

This study includes the research work which was carried out to investigate the range of difficulties faced by the workers and its effects on them while working in textile based cottage industries along with their causes. This research provides necessary tip-offs to solve those problems in a systematic way. Therefore, it was considered to know the number of machines (looms) operated by one worker, number of machines in one unit and number of operators in one unit. The minimum and maximum noise levels were recorded by using digital sound level meter to compute average noise level/ unit. To identify the health problems like respiratory, hearing/listening, irritation, heart/BP, annoyance and headache faced by the workers, the survey was conducted. In present research work the minimum noise recorded was 101.6dB (A) and maximum as 1 09.8< dB (A), which was compared with OSHA and WHO (World Health Organization) standards. Result of this study shows that due to high intensity of noise generated by looms and dusts at work places, workers were facing the mental and physical problems. (author)

Assessment of the Dyeing Properties of the Pigments Produced by Talaromyces spp.

Science.gov (United States)

Morales-Oyervides, Lourdes; Oliveira, Jorge; Sousa-Gallagher, Maria; Méndez-Zavala, Alejandro; Montañez, Julio Cesar

2017-07-05

The high production yields of pigments by Talaromyces spp. and their high thermal stability have implied that industrial application interests may emerge in the food and textile industries, as they both involve subjecting the colourants to high temperatures. The present study aimed to assess the potential application of the pigments produced by Talaromyces spp. in the textile area by studying their dyeing properties. Dyeing studies were performed on wool. The dyeing process consisted of three stages: scouring, mordanting, and dyeing. Two different mordants (alum, A; ferric chloride, F) were tested at different concentrations on fabric weight (A: 5, 10, 15%; F: 10, 20, 30%). The mordanting process had a significant effect on the final colour of the dyed fabrics obtained. The values of dyeing rate constant ( k ), half-time of dyeing ( t 1/2 ), and sorption kinetics behaviour were evaluated and discussed. The obtained results showed that pigments produced by Talaromyces spp. could serve as a source for the natural dyeing of wool textiles.

Assessment of the Dyeing Properties of the Pigments Produced by Talaromyces spp.

Science.gov (United States)

Oliveira, Jorge; Sousa-Gallagher, Maria; Montañez, Julio Cesar

2017-01-01

The high production yields of pigments by Talaromyces spp. and their high thermal stability have implied that industrial application interests may emerge in the food and textile industries, as they both involve subjecting the colourants to high temperatures. The present study aimed to assess the potential application of the pigments produced by Talaromyces spp. in the textile area by studying their dyeing properties. Dyeing studies were performed on wool. The dyeing process consisted of three stages: scouring, mordanting, and dyeing. Two different mordants (alum, A; ferric chloride, F) were tested at different concentrations on fabric weight (A: 5, 10, 15%; F: 10, 20, 30%). The mordanting process had a significant effect on the final colour of the dyed fabrics obtained. The values of dyeing rate constant (k), half-time of dyeing (t1/2), and sorption kinetics behaviour were evaluated and discussed. The obtained results showed that pigments produced by Talaromyces spp. could serve as a source for the natural dyeing of wool textiles. PMID:29371555

Plasmonic Dye-Sensitized Solar Cells

KAUST Repository

Ding, I-Kang

2010-12-14

This image presents a scanning electron microscopy image of solid state dye-sensitized solar cell with a plasmonic back reflector, overlaid with simulated field intensity plots when monochromatic light is incident on the device. Plasmonic back reflectors, which consist of 2D arrays of silver nanodomes, can enhance absorption through excitation of plasmonic modes and increased light scattering, as reported by Michael D. McGehee, Yi Cui, and co-workers.

Math/Measurement Literacy for Upgrading Skills of Industrial Hourly Workers. Math Manual.

Science.gov (United States)

McMahon, Joan L.

This manual contains materials for a numeracy course for adult industrial workers. In addition to assessment tests, seven units are provided. Unit topics are whole numbers; fractions; decimals; percents, median, and range; measurement and signed numbers; ratio/proportion and introduction to algebra; and computer literacy using algebra software.…

Zinc toxicity among galvanization workers in the iron and steel industry.

Science.gov (United States)

El Safty, Amal; El Mahgoub, Khalid; Helal, Sawsan; Abdel Maksoud, Neveen

2008-10-01

Galvanization is the process of coating steel or cast iron pieces with zinc, allowing complete protection against corrosion. The ultimate goal of this work was to assess the effect of occupational exposure to zinc in the galvanization process on different metals in the human body and to detect the association between zinc exposure and its effect on the respiratory system. This study was conducted in 111 subjects in one of the major companies in the iron and steel industry. There were 61 subjects (workers) who were involved in the galvanization process. Fifty adult men were chosen as a matched reference group from other departments of the company. All workers were interviewed using a special questionnaire on occupational history and chest diseases. Ventilatory functions and chest X rays were assessed in all examined workers. Also, complete blood counts were performed, and serum zinc, iron, copper, calcium, and magnesium levels were tested. This study illustrated the relation between zinc exposure in the galvanization process and high zinc levels among exposed workers, which was associated with a high prevalence rate of metal fume fever (MFF) and low blood copper and calcium levels. There was no statistically significant difference between the exposed and control groups with regards to the magnesium level. No long-term effect of metals exposure was detected on ventilatory functions or chest X rays among the exposed workers.

Serum levels of T3 and T4 among workers of contraceptive pills industry

International Nuclear Information System (INIS)

Abbas, E.Z.; Emara, A.; Yassen, Y.Z.; Amr, M.M.; Jaras, M.S.

1985-01-01

Serum levels of thyroxine and triiodothyronine were determined in 24 workers engaged in contraceptive pills industry and 20 control subjects. Serum thyroxine in exposed subjects was significantly lower, compared to its level in controls. On the other hand, triiodothyronine was significantly higher in exposed workers. Thus, it is concluded that exposure to the dust of contraceptive drugs, namely estrogen and progesterone, produced disturbances in thyroid gland function and thyroid hormone metabolism. (author)

Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

Directory of Open Access Journals (Sweden)

Bing Han

Full Text Available This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

Science.gov (United States)

Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

2016-01-01

This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

A 2-year follow-up of spirometric parameters in workers of a tile and ceramic industry, Yazd, southeastern Iran.

Science.gov (United States)

Mehrparvar, A H; Mirmohammadi, S J; Mostaghaci, M; Davari, M H; Hashemi, S H

2013-04-01

Respiratory diseases cause a considerable amount of morbidity and mortality in the world. Pulmonary function tests are important measures for the diagnosis and management of respiratory disorders. Workers in tile and ceramic industry are exposed to high amounts of respiratory pollutants. To identify the changes in spirometric parameters in a 2-year period among tile and ceramic workers in Yazd and compare it with a control group. The study was conducted in 5 tile and ceramic factories selected by cluster sampling between 2009 and 2011 in Yazd, southeastern Iran. Demographic data and spirometric parameters of participants were recorded. Spirometric parameters were significantly reduced during the 2 years. The largest decrease was observed in FVC (≈500 mL) in ball-mill and grinding after 2 years. Decrease in all spirometric parameters was significantly higher in industrial workers than office workers. Respiratory exposure in tile and ceramic industry can significantly affect pulmonary function tests.

Comparative sensitizing potencies of fragrances, preservatives, and hair dyes

DEFF Research Database (Denmark)

Lidén, Carola; Yazar, Kerem; Johansen, Jeanne Duus

2016-01-01

the sensitizing potencies of fragrance substances, preservatives, and hair dye substances, which are skin sensitizers that frequently come into contact with the skin of consumers and workers, LLNA results and EC3 values for 72 fragrance substances, 25 preservatives and 107 hair dye substances were obtained from...... two published compilations of LLNA data and opinions by the Scientific Committee on Consumer Safety and its predecessors. The median EC3 values of fragrances (n = 61), preservatives (n = 19) and hair dyes (n = 59) were 5.9%, 0.9%, and 1.3%, respectively. The majority of sensitizing preservatives...... and hair dyes are thus strong or extreme sensitizers (EC3 value of ≤2%), and fragrances are mostly moderate sensitizers. Although fragrances are typically moderate sensitizers, they are among the most frequent causes of contact allergy. This indicates that factors other than potency need to be addressed...

Early occupational hearing loss of workers in a stone crushing industry: Our experience in a developing country

Directory of Open Access Journals (Sweden)

Emmanuel D Kitcher

2012-01-01

Full Text Available Noise-induced hearing loss (NIHL is an irreversible sensorineural hearing loss associated with exposure to high levels of excessive noise. This paper aims to assess the prevalence of early NIHL and the awareness of the effects of noise on health among stone crushing industry workers. This was a comparative cross-sectional study in Ghana of 140 workers from the stone crushing industry compared with a control group of 150 health workers. The stone workers and controls were evaluated using a structured questionnaire, which assessed symptoms of hearing loss, tinnitus, knowledge on the health hazards associated with work in noisy environment and the use of hearing protective device. Pure tone audiometric assessment was carried out for stone workers and controls. Noise levels at the work stations of the stone workers and of the controls were measured. Statistical Analysis of data was carried out using SPSS package version 16. The mean age of stone workers and controls was 42.58±7.85 and 42.19±12 years, respectively. Subjective hearing loss occurred in 21.5% of the workers and in 2.8% of the controls. Tinnitus occurred in 26.9% of stone workers and 21.5% of controls, while 87.5% stone workers had sound knowledge on the health hazards of a noisy environment. Early NIHL in the left ear occurred in 19.3% of the stone workers compared with 0.7% in controls and in the right ear, it occurred in 14.3% of the stone workers and in 1.3% of the controls; P<0.005. In conclusion, the prevalence rate of early NIHL among stone crushing workers is about 19.3% for the left ear and 14.3% for the right ear.

Factor Affecting Textile Dye Removal Using Adsorbent From Activated Carbon: A Review

Directory of Open Access Journals (Sweden)

Mohammad Razi Mohd Adib

2017-01-01

Full Text Available Industrial company such as textile, leather, cosmetics, paper and plastic generated wastewater containing large amount of dye colour. The removal of dye materials are importance as the presence of this kind of pollutant influence the quality of water and makes it aesthetically unpleasant. As their chemical structures are complicated, it is difficult to treat dyes with municipal waste treatment operations. Even a small quantity of dye does cause high visibility and undesirability. There have been various treatment technique reviewed for the removal of dye in wastewater. However, these treatment process has made it to another expensive treatment method. This review focus on the application of adsorbent in dye removal from textile wastewater as the most economical and effective method, adsorption has become the most preferred method to remove dye. The review provides literature information about different basis materials used to produce activated carbon like agricultural waste and industrial waste as well as the operational parameters factors in term of contact time, adsorbent dosage, pH solution and initial dye concentration that will affect the process in removing textile dye. This review approach the low cost and environmental friendly adsorbent for replacing conventional activated carbon.

Psychological Intervention for Post-traumatic Stress Disorder among Witnesses of a Fatal Industrial Accident in a Workers' Health Center

Directory of Open Access Journals (Sweden)

Dong-Mug Kang

2017-12-01

Full Text Available Post-traumatic stress disorder (PTSD is a serious problem not only among workers who experience industrial accidents but also among workers who witness such accidents. Early intervention is needed to prevent prolonged psychological problems. There has been no study conducted regarding the psychological problems of and interventions for bystander workers in Korea. This study introduces the experience of intervention on psychological problems at the Busan Workers' Health Center workers who witnessed their colleagues' death. An investigation and an intervention were conducted according to the Korean Occupational Safety and Health Agency (KOSHA Guide. In total, 21 individuals including indirect observers showed statistical differences on scores of the Impact Event Scale Revised and the Patient Health Questionnaire 9 after the intervention. Future interventions and research involving a larger sample size over a longer period are needed. The KOSHA Guide could be a useful tool for urgent psychological intervention in the event of major workplace disasters. Keywords: industrial accident, post-traumatic stress disorder, witness, workers' health center

First analysis of mortality of nuclear industry workers in Japan, 1986-1992

International Nuclear Information System (INIS)

Hosoda, Yutaka; Kuba, Michiyoshi; Miyake, Toshio

1997-01-01

The health effects or low doses and low dose rates exposure to human bodies have not been clarified yet. Under this situation, the Radiation Effects Association entrusted by the Science and Technology Agency of the Japanese Government began a survey entitled 'The Epidemiological Study on Nuclear Industry Workers.' The study population consisted of 114,900 workers in the nuclear industry. Their vital status and identification of cause of death were confirmed by residence registration records and by magnetic tapes of National Vital Statistics, respectively. Their dose information was obtained from the Radiation Dose Registration Center for Workers. The total population dose of the study population was 1,598.5 person-Sv, and the mean cumulative dose per individual was 13.9 mSv. The study period was between 1986 and 1992, average follow-up period being 4.6 years. There were 1,758 deaths including 661 of all malignant neoplasms among the population. The SMR was used to compare mortality among members of the study population and that of Japanese males in general after adjustment for age distribution. Furthermore, members of the population were grouped by cumulative dose groups, and the O/E was calculated to test whether there is a trend for the death rate to increase with dose. The present study demonstrated no evidence of any effect of low level radiation upon health, particularly upon the cancer mortality. (author)

Cancer morbidity among workers in the telecommunications industry.

Science.gov (United States)

Vågerö, D; Ahlbom, A; Olin, R; Sahlsten, S

1985-03-01

A retrospective cohort study of 2918 workers in the telecommunications industry in Sweden recorded the cancer morbidity for the period 1958-79. Cases of cancer were collected from the Swedish Cancer Registry for this period and information on work characteristics was collected for the entire period of employment. The total cancer morbidity was as expected. There was no excess risk of lung cancer but an excess risk of malignant melanoma of the skin was detected (SMR = 2.6, 12 cases). This excess risk was particularly associated with work environments where soldering was practised. Estimates of the SMR became larger with the assumption of a longer induction/latency period.

[Health problems and illness of female workers in textile industries].

Science.gov (United States)

Soonthorndhada, K

1989-07-01

This paper examines 3 major health-related issues: 1) existing health problems and illnesses resulting from physical environmental conditions at workplaces; 2) female workers' perception on illness and health protection; and 3) the relationship between illness and risk factors. The study area is textile factories in Bangkok and its peripheries. Data are drawn from the 1987 Survey of Occupational Health and Textile Industrial Development in Thailand: Effect on Health and Socioeconomics of Female Migrant Workers. This study shows that about 20% of female workers have ill-health problems and illness after a period of working mainly due to high levels of dust and noise, and inadequate light. These conditions are hazardous to the respiratory system (resulting in cough and chest tightness), the hearing system (pains as well as impaired and hearing loss), eye systems (irritation, reduced visual capacity) and skin allergy. Such illnesses are intensified in the long- run. The analysis of variances reveals that education, section of work, perception (particularly mask and ear plug) significantly affect these illnesses. This study concludes that health education and occupational health should be provided in factories with emphasis on health prevention and promotion.

Organic and Inorganic Dyes in Polyelectrolyte Multilayer Films

Science.gov (United States)

Ball, Vincent

2012-01-01

Polyelectrolyte multilayer films are a versatile functionalization method of surfaces and rely on the alternated adsorption of oppositely charged species. Among such species, charged dyes can also be alternated with oppositely charged polymers, which is challenging from a fundamental point of view, because polyelectrolytes require a minimal number of charges, whereas even monovalent dyes can be incorporated during the alternated adsorption process. We will not only focus on organic dyes but also on their inorganic counterparts and on metal complexes. Such films offer plenty of possible applications in dye sensitized solar cells. In addition, dyes are massively used in the textile industry and in histology to stain textile fibers or tissues. However, the excess of non bound dyes poses serious environmental problems. It is hence of the highest interest to design materials able to adsorb such dyes in an almost irreversible manner. Polyelectrolyte multilayer films, owing to their ion exchange behavior can be useful for such a task allowing for impressive overconcentration of dyes with respect to the dye in solution. The actual state of knowledge of the interactions between charged dyes and adsorbed polyelectrolytes is the focus of this review article.

EH AND S ANALYSIS OF DYE-SENSITIZED PHOTOVOLTAIC SOLAR CELL PRODUCTION

International Nuclear Information System (INIS)

BOWERMAN, B.; FTHENAKIS, V.

2001-01-01

Photovoltaic solar cells based on a dye-sensitized nanocrystalline titanium dioxide photoelectrode have been researched and reported since the early 1990's. Commercial production of dye-sensitized photovoltaic solar cells has recently been reported in Australia. In this report, current manufacturing methods are described, and estimates are made of annual chemical use and emissions during production. Environmental, health and safety considerations for handling these materials are discussed. This preliminary EH and S evaluation of dye-sensitized titanium dioxide solar cells indicates that some precautions will be necessary to mitigate hazards that could result in worker exposure. Additional information required for a more complete assessment is identified

Alberta's labour force and the energy industry : how the Alberta government is collaborating with the energy industry to improve the supply of skilled workers

Energy Technology Data Exchange (ETDEWEB)

Williams, S. [Alberta Ministry of Human Resources and Employment, Edmonton, AB (Canada)

2005-07-01

This presentation described the potential short- and long-term impacts that a lack of skilled labour may have on the energy industry in Alberta. Currently, one in six Albertans are directly or indirectly employed in the energy industry, which generated 28.1 per cent of the total provincial revenue. A chart of industry employment changes in 2004 was presented along with a description of what the provincial and federal governments are doing to help bring in more skilled workers. The presentation examined the options that are currently available to companies seeking skilled workers in light of an aging population. The challenge of a shortage in skilled labour can be addressed by increasing training opportunities, reviewing hiring standards, changing workplace technology and using migration or immigration. The barriers to labour market adjustment were identified as being a lack of labour market information, the time required for individuals to acquire skills, and financial constraints on employers. Some of the options for companies seeking skilled workers include the Provincial Nominee Program, internal training and apprenticeship. The presentation also described how the Alberta government is collaborating with the energy industry to develop and implement training and apprenticeship programs. tabs., figs.

Perceptions of risk from workers in high risk industries with work related musculoskeletal disorders.

Science.gov (United States)

Hunter, D; Silverstein, B

2014-01-01

Work-related musculoskeletal disorders (WMSDs) remain a major occupational health problem, despite decades of research, outreach, and intervention. The aim of this study is to promote early identification and prevention of WMSDs by developing education and outreach materials grounded in interview data collected from workers that have recently filed for workers compensation (WC) for WMSDs. We conducted semi-structured telephone interviews with WC claimants (n=66) from high risk industries identified through the use of a Prevention Index (PI) in Washington state with WMSDs of the back, shoulder, hand/wrist, or knee. Perceptions regarding the degree of exposure to WMSD risk factors, the social construction of pain, and the potential to implement injury-prevention measures varied widely. Many workers dismissed their injuries as the result of "fluke" or "freak" occurrences and framed their exposure to risk factors for WMSDs as either inevitable or "just part of the job." Workers in high-risk industries for WMSDs described their work conditions in ways that suggested: (1) a lack of awareness of the potential for developing a WMSD, (2) a view of work-related pain as normal, and/or (3) a pattern of self-blame for WMSD onset. A paradigm that either asserts the inevitability of WMSDs or dismisses potential control measures presents both a significant barrier to injury prevention efforts as well as a major opportunity for future occupational health research.

Second analysis of mortality of nuclear industry workers in Japan

International Nuclear Information System (INIS)

Murata, Motoi; Ohshima, Sumio; Kudo, Shin-ichi

2002-01-01

A cohort study of nuclear industry workers was begun in 1990 to determine the possible health effect of low dose radiation exposure. A follow-up study of about 244,000 male workers was conducted using residence registration records. About 176,000 subjects were successfully followed up, and 5,527 deaths were ascertained during the period of observation 1986 through 1997. Underlying causes of death were identified by record linkage with magnetic tape records of national vital statistics data. The standardized mortality ratio (SMR) was calculated with Japanese males in general as the reference population. Tests for trends in death rates were made against cumulative radiation dose. The SMR (and its 95% confidence interval) was 0.90 (0.87-0.92) for all causes, 0.80 (0.77-0.84) for non-neoplastic diseases and 0.94 (0.90-0.98) for all cancer, respectively. The lower SMR was ascribed to possible healthy worker effects, etc. In the trend analyses, the death rate for neither all cancers sites nor leukemia showed any positive correlation with radiation dose, while significantly positive correlations were found for cancers of the esophagus (p<0.001), stomach (p<0.05) and rectum (p<0.05), and also for external causes (p<0.001). In lifestyle survey studies of 49,000 workers, both smoking and drinking habits were positively correlated with radiation dose. These lifestyle characteristics may have been important factors affecting the present results

Short communication: Industrial effluent treatments using heavy ...

African Journals Online (AJOL)

Bioflocculants produced by Herbaspirillium sp. CH7, Paenibacillus sp. CH11, Bacillus sp. CH15 and a Halomonas sp. were preliminarily evaluated as flocculating agents in the treatment of industrial wastewater effluents. Industrial (1 local chemical-industry and 2 textile-industry: Biavin 109-medium blue dye and Whale dye) ...

Assessment of internal dose caused by uranium isotopes for workers in the phosphatic industry using alpha spectrometry

International Nuclear Information System (INIS)

Kharita, M. H.; Sakhita, Kh.; Al-Dallal, Z.

2007-04-01

There is probability of exposure to uranium for workers in the phosphate industry (Internal exposure) by inhalation, and the deposition of this uranium in organs and tissues, and the consequence excretion out of the body by perspiration or urine. This study focuses on the determination of uranium in urine samples of workers .some results seem to be higher than the detection limit of the method, therefore routine monitoring is required for those workers.(Author)

Evaluating Effects of Heat Stress on Cognitive Function among Workers in a Hot Industry

OpenAIRE

Adel Mazloumi; Farideh Golbabaei; Somayeh Mahmood Khani; Zeinab Kazemi; Mostafa Hosseini; Marzieh Abbasinia; Somayeh Farhang Dehghan

2014-01-01

Background:Heat stress, as one of the most common occupational health problems, can impair operators' cognitive processes. The aim of this study was to evaluate the impact of thermal stress on cognitive function among workers in a hot industry. Methods: In this cross-sectional study conducted in Malibel Saipa Company in 2013, workers were assigned into two groups: one group were exposed to heat stress (n=35), working in casting unit and the other group working in machin-ing unit (n=35) wit...

The effects of occupational noise on blood pressure and heart rate of workers in an automotive parts industry.

Science.gov (United States)

Kalantary, Saba; Dehghani, Ali; Yekaninejad, Mir Saeed; Omidi, Leila; Rahimzadeh, Mitra

2015-07-01

One of the most important impacts of industrial noise is physiological and psychological effects. The increases in workers' blood pressure and heart rate were detected during and after exposure to high levels of noise. The objectives of this research were to determine whether the noise exposures have any effects on blood pressure and heart rate of workers in the automotive parts industry. This case study was done in 2011 at different units of an automotive parts manufacturing in Tehran. Sound pressure level was measured at different units of the factory with a calibrated instrument. Demographic features of workers were gathered with an appropriate questionnaire. Heart rate and blood pressure were measured twice in a day in the start time of work day (before exposure to noise) and middle shift hours (during exposure to noise) in the occupational physician office. For analyzing data, chi-square, independent sample t-test, paired t-test, and analysis of covariance (ANCOVA) were used. P industrial noise may increase the heart rate of workers. Although rises in heart rate, systolic, and diastolic blood pressure of workers in the case group were observed after exposure to noise, the values of heart rate, systolic, and diastolic blood pressure were in the normal range. Further experimental investigations are needed to determine the relationships between these variables.

Removal of azo and anthraquinone reactive dyes from industrial wastewaters using MgO nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Moussavi, Gholamreza, E-mail: Moussavi@modares.ac.ir [Department of Environmental Health, School of Medical Sciences, Tarbiat Modares University, Tehran (Iran, Islamic Republic of); Mahmoudi, Maryam [Department of Environmental Health, School of Medical Sciences, Tarbiat Modares University, Tehran (Iran, Islamic Republic of)

2009-09-15

In the present investigation, a porous MgO powder was synthesized and tested for the removal of dyes from aqueous solution. The size of the MgO particles was in the range of 38-44 nm, with an average specific surface area of 153.7 m{sup 2}/g. Adsorption of reactive blue 19 and reactive red 198 was conducted to model azo and anthraquinone dyes at various MgO dosages, dye concentrations, solution pHs and contact times in a batch reactor. Experimental results indicate that the prepared MgO powder can remove more than 98% of both dyes under optimum operational conditions of a dosage of 0.2 g, pH 8 and a contact time of 5 min for initial dye concentrations of 50-300 mg/L. The isotherm evaluations revealed that the Langmuir model attained better fits to the experimental equilibrium data than the Freundlich model. The maximum predicted adsorption capacities were 166.7 and 123.5 mg of dye per gram of adsorbent for RB 19 and RR 198, respectively. In addition, adsorption kinetic data followed a pseudo-second-order rate for both tested dyes.

The Fuzzy u-Chart for Sustainable Manufacturing in the Vietnam Textile Dyeing Industry

Directory of Open Access Journals (Sweden)

Kim-Phung Truong

2017-07-01

Full Text Available The inevitability of measurement errors and/or humans of subjectivity in data collection processes make accumulated data imprecise, and are thus called fuzzy data. To adapt to this fuzzy domain in a manufacturing process, a traditional u control chart for monitoring the average number of nonconformities per unit is required to extend. In this paper, we first generalize the u chart, named fuzzy u-chart, whose control limits are built on the basis of resolution identity, which is a well-known fuzzy set theory. Then, an approach to fuzzy-logic reasoning, incorporating the decision-maker’s varying levels of optimism towards the online process, is proposed to categorize the manufacturing conditions. In addition, we further develop a condition-based classification mechanism, where the process conditions can be discriminated into intermittent states between in-control and out-of-control. As anomalous conditions are monitored to some extent, this condition-based classification mechanism can provide the critical information to deliberate the cost of process intervention with respect to the gain of quality improvement. Finally, the proposed fuzzy u-chart is implemented in the Vietnam textile dyeing industry to replace its conventional u-chart. The results demonstrate that the industry can effectively evade unnecessary adjustments to its current processes; thus, the industry can substantially reduce its operational cost and potential loss.

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

Science.gov (United States)

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Sorption isotherms, kinetic and optimization process of amino acid proline based polymer nanocomposite for the removal of selected textile dyes from industrial wastewater.

Science.gov (United States)

Raghunath, Sharista; Anand, K; Gengan, R M; Nayunigari, Mithil Kumar; Maity, Arjun

2016-12-01

In this article, adsorption and kinetic studies were carried out on three textile dyes, namely Reactive Blue 222 (RB 222), Reactive Red 195 (RR 195) and Reactive Yellow 145 (RY 145). The dyes studied in a mixture were adsorbed under various conditions onto PRO-BEN, a bentonite modified with a new cationic proline polymer (l-proline-epichlorohydrin polymer). The proline polymer was characterized by 1 H NMR, Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS) and TEM. The PRO-BEN composite was characterized by FT-IR, dynamic light scattering (DLS) (zeta potential), TEM imaging, SEM/EDX and X-ray photoelectron spectroscopy (characterize the binding energy). During adsorption studies, factors involving pH, temperature, the initial concentrations of the dyes and the quantity of PRO-BEN used during adsorption were established. The results revealed that the adsorption mechanism was categorized by the Langmuir type 1 isotherm. The adsorption data followed the pseudo-second order kinetic model. The intraparticle diffusion model indicated that adsorption did not only depend on the intraparticle diffusion of the dyes. The thermodynamic parameters verified that the adsorption process was spontaneous and exothermic. The Gibbs free energy values indicated that physisorption had occurred. Successful adsorption of dyes from an industrial effluent was achieved. Desorption studies concluded that PRO-BEN desorbed the dyes better than alumina. This can thereby be viewed as a recyclable remediation material. The PRO-BEN composite could be a cost efficient alternative towards the removal of organic dyes in wastewater treatment. Copyright © 2016 Elsevier B.V. All rights reserved.

Cleaner production options for reducing industrial waste: the case of batik industry in Malang, East Java-Indonesia

Science.gov (United States)

Sirait, M.

2018-01-01

The aim of this research is to conduct cleaner production options for improving the environmental performance during the production of batik industry, the case of UKM batik, Malang, East Java. Batik industry is one of small and medium textile industry which has contribution to economic growth in Malang. However, during production the batik, it generates wastewater that has potential to decrease the environmental performance. Wastewater from Celaket batik industry has BOD, COD, TSS, and pH level is far larger than the threshold of water quality standard as a result of use chemical substance during the dyes processing. In order to prevent generating wastewater, this study utilized cleaner production options, such as substitution of input material.Substitution of input material for dyes process was implemented by replacement chemical dyes (e.g.indigosol, nafthol, rapid) with natural dyes (e.g. Indigofero Tintoria). Modifying of technology/equipment was conducted by developing wastewater treatment equipment to reduce waste of batik production. The implementation of this strategy was carried out by changing input material from chemical dyes with natural dyes. The CP uptake could reduce significantly the environmental impact in term of reduction of COD, BOD, and TSS.

Women workers in male dominated industrial manufacturing organisations: Contrasting workplace case studies from Australia

OpenAIRE

Burgess, John; Henderson, Lindy; Strachan, Glenda

2005-01-01

This study compared women's roles, expectations and experiences in two comparable, male dominated industrial manufacturing companies in Australia. Both organisations are subject to legislated equal opportunity program and reporting requirements. The research was conducted to examinee the differences between what is submitted in their EEO reports and the experience of women workers in the organisations. Good jobs and poor jobs existed in the same legislative and industrial framework and in the...

Socio-economic status of workers of building construction industry.

Science.gov (United States)

Tiwary, Guddi; Gangopadhyay, P K; Biswas, S; Nayak, K; Chatterjee, M K; Chakraborty, D; Mukherjee, S

2012-05-01

Informal/unorganised sector covers 92% of the total work force in India. About 50% of the construction industrial workers belonged to informal/unorganised sector. The present study was undertaken to know the socio-economic status of construction worker and availing of the social security measures by this working group. The study covered 150 subjects with an average age of 32 years and mean duration of work was nine years. They were poorly paid with an average income of Rs. 4956/-per month. Though the literacy rate was high (79%) yet most of them were addicted to different habits like drinking alcohol, smoking bidi, tobacco chewing etc., Abusing the family members were noted in (30%) of the cases. Their regular intake of food, usually inadequate in quantity and was mainly consisted of rice, pulses, vegetables. Though most of the subjects (73%) were living in kacha houses yet the latrine facilities were available to 62% of total covered houses. Majority of them were unaware of the different social security schemes/measures. The details have been discussed here.

Eco-chemical knowledge, behavior and engagement of workers employed in the mineral fertilizer industry in Novi Sad

Directory of Open Access Journals (Sweden)

Cvjetićanin Stanko

2006-01-01

Full Text Available The level of environmental pollution is influenced by the knowledge, behavior and ecological engagement of both the individual and society. The mineral fertilizer industry represents a potential source of pollution. The issue examined in this study is the level of eco-chemical knowledge, behavior and ecological engagement of the workers employed in the mineral fertilizer industry in Novi Sad. We have concluded that the workers hover low level of knowledge, behavior and engagement. The results obtained could be used for the selection of methods to enhance the eco-chemical knowledge of the employees.

Hearing impairment among workers exposed to excessive levels of noise in ginning industries

Directory of Open Access Journals (Sweden)

Kamalesh J Dube

2011-01-01

Full Text Available Cotton ginning workers have a risk of hearing loss due to excessive noise levels at the workplace environment. In this study, estimates of typical sound levels prevailing at the workplace environment and its effects on hearing ability of the exposed workers were made among cotton ginning workers. Data on self-reported health status was collected by a questionnaire survey at 10 cotton ginning industries located at Jalgaon district of Maharashtra state, India. The cotton ginning workers were exposed to continuous noise levels between 89 and 106 dBA. The hearing ability of the subjects was accessed by pure tone audiometry. The results of audiometry show mild, moderate and moderately severe degree of hearing impairment among the cotton ginning workers. The data generated during the study show that hearing loss was significantly associated with period of exposure to the workplace noise (P <0.0001. The prevalence of audiometric hearing impairment defined as a threshold average greater than 25 dB hearing level was 96% for binaural low-frequency average, 97% for binaural mid frequency average and 94% for binaural high-frequency average in the cotton ginning workers. We recommend the compulsory use of personal protective equipment like ear plug by the cotton ginning workers at the workplace environment. A regular maintenance of ginning and pressing machineries will avoid the emission of excessive noise at the workplace environment of cotton gins. A regular periodic medical examination is necessary to measure the impact of workplace noise on the health of cotton ginning workers.

Usage of FTIR-ATR as Non-Destructive Analysis of Selected Toxic Dyes

Science.gov (United States)

Bartošová, Alica; Blinová, Lenka; Sirotiak, Maroš; Michalíková, Anna

2017-06-01

The degradation of the environment which is due to the discharge of polluting wastewater from industrial sources poses a real problem in several countries. Textile industries use large volumes of water in their operations, discharging thus large volume of wastewater into the environment, most of which is untreated. The wastewater contains a variety of chemicals from various stages of process operations, including desizing, scouring, bleaching and dyeing. The main purpose of this paper is to introduce Infrared Spectrometry with Fourier transformation as a non-destructive method for study, identifation and rapid determination of selected representatives of cationic (Methylene Blue), azo (Congo Red, Eriochrome Black T) and nitroso (Naphthol Green B) dyes. In conjunction with the ATR technique, FTIR offers a reliable detection method of dyes without extraction by other dangerous substances. Spectral interpretation of dye spectra revealed valuable information about the identification and characterization of each group of dyes.

Study of otoacoustic emissions in workers of various professional groups of the coal industry

Directory of Open Access Journals (Sweden)

Shydlovska T.A.

2015-09-01

Full Text Available Noise influence takes one of the leading roles in the development of sensorineural hearing loss (SHL. At the same time professional deafness steadily occupies the 5th place in the structure of occupational diseases in Ukraine over the past few years. Of special importance is the problem of pre-clinical and early diagnosis of occupational hearing deterioration, in sense of timely prophylactic and rehabilitation measures in “risk group” workers. The objective research methods play an important role in the diagnosis of auditory analyzer state. Many scientific studies have shown the diagnostic effectiveness of method of otoacoustic emissions recording in the early diagnosis of lesions of receptor part of auditory analyzer. It is known that SHL of noise genesis largely affects the receptor part of the auditory analyzer, for which the OAE method has great practical diagnostic significance. Objective: to study informativity indicators of otoacoustic emission for the diagnosis of sensorineural hearing loss in various occupational groups of coal workers in Ukrainian mines. Materials and Methods: Auditory function of 87 workers of the coal industry (drifters, miners and longwall miners with different levels of industrial noise and hygienic conditions in their workplaces was: 28 studied drifters (group 1, 25 miners (group 2 and 34 longwall miners (group 3. Work experience in noise in these groups was 17,9±1,0; 23,1±1,0 and 22,2±2,0 accordingly. Noise ratio in drifters was 93,6±4,9 dBA, in miners – 92,9±5,5 dBA and in longwall miners – 86,5±6,04 dBA accordingly, while the maximum permitted level is 80 dBA. The research was conducted on the analyzing system "Eclipse" "Interacoustics" (Denmark. All patients underwent registratiov of the caused OAE at frequency distortion product (DPOAE at frequencies 1-6 kHz. The results were rated using variation statistics Student's test. Results: The most prominent violation of the receptor part of the

Bioremoval of the azo dye Congo Red by the microalga Chlorella vulgaris.

Science.gov (United States)

Hernández-Zamora, Miriam; Cristiani-Urbina, Eliseo; Martínez-Jerónimo, Fernando; Perales-Vela, Hugo Virgilio; Ponce-Noyola, Teresa; Montes-Horcasitas, María del Carmen; Cañizares-Villanueva, Rosa Olivia

2015-07-01

Discharge of dye-containing wastewater by the textile industry can adversely affect aquatic ecosystems and human health. Bioremoval is an alternative to industrial processes for detoxifying water contaminated with dyes. In this work, active and inactive biomass of the microalga Chlorella vulgaris was assayed for the ability to remove Congo Red (CR) dye from aqueous solutions. Through biosorption and biodegradation processes, Chlorella vulgaris was able to remove 83 and 58 % of dye at concentrations of 5 and 25 mg L(-1), respectively. The maximum adsorption capacity at equilibrium was 200 mg g(-1). The Langmuir model best described the experimental equilibrium data. The acute toxicity test (48 h) with two species of cladocerans indicated that the toxicity of the dye in the effluent was significantly decreased compared to the initial concentrations in the influent. Daphnia magna was the species less sensitive to dye (EC50 = 17.0 mg L(-1)), followed by Ceriodaphnia dubia (EC50 = 3.32 mg L(-1)). These results show that Chlorella vulgaris significantly reduced the dye concentration and toxicity. Therefore, this method may be a viable option for the treatment of this type of effluent.

A Participatory Physical and Psychosocial Intervention for Balancing the Demands and Resources Among Industrial Workers (PIPPI)

DEFF Research Database (Denmark)

Gupta, Nidhi; Wåhlin-Jacobsen, Christian Dyrlund; Nøhr Henriksen, Louise

2015-01-01

the background, design and protocol of a cluster randomized controlled trial evaluating the effectiveness of an intervention to reduce need for recovery and improve work ability among industrial workers. Methods/Design: A two-year cluster randomized controlled design will be utilized, in which controls will also...... an intervention based on the abovementioned features which may improve the work environment, available resources and health of industrial workers, and hence their need for recovery and work ability.......Background: Need for recovery and work ability are strongly associated with high employee turnover, well-being and sickness absence. However, scientific knowledge on effective interventions to improve work ability and decrease need for recovery is scarce. Thus, the present study aims to describe...

Opinions of UK rescue shelter and rehoming center workers on the problems facing their industry

OpenAIRE

Stavisky, Jenny; Brennan, Marnie L.; Downes, Martin J.; Dean, Rachel S.

2017-01-01

Animal shelters exist worldwide to care for and rehome unwanted or straying pets. Previous studies have examined why owners breed unwanted animals, or relinquish their pets to shelters. However, the views of shelter workers, who receive and care for these animals, have previously been largely unexplored. The aim of this study was to investigate the perceptions of animal shelter workers on the problems facing their industry. A sampling frame was constructed, consisting of every identified shel...

Modified coal fly ash as low cost adsorbent for removal reactive dyes from batik industry

Directory of Open Access Journals (Sweden)

Taufiq Agus

2018-01-01

Full Text Available The removal of reactive dyes on modified coal fly ash has been investigated during a series of batch adsorption experiments. Physical characteristics of modified coal fly ash was characterized by Brunauer Emmett Teller (BET surface area analysis, X-ray powder diffraction (XRD, Fourier transform infrared spectrophotometer (FT-IR, and scanning electron microscope (SEM. The effects of operational parameters such as initial dye concentration (50–200 mg/L, solution pH (4–10 and adsorbent dosage (50–200 mg/L were studied. The adsorption experiments indicated that modified coal fly ash was effective in removing of Remazol Blue. The percentage removal of dyes increased while the modified fly ash dosage increased. The percentage removal of dyes increased with decreased initial concentration of the dye and also increased with amount of adsorbent used. The optimum of removal of dyes was found to be 94% at initial dye concentration 50 g/mL, modified fly ash dosage 250 g/mL, and pH of 2.0.

Reference book for the nitrogen industry worker in two volumes, volume 1

Science.gov (United States)

1982-05-01

The first volume presents the physical and chemical properties of gaseous and liquid substances used and obtained at the nitrogen industry enterprises. It describes the different methods for producing and purifying production gases (nitrogen-hydrogen mixture, gas synthesis). It examines the physical and chemical properties of the processes of amonia and methanol synthesis, the industrial plans and the principles for automating them. Certain methods are given for technological calculations, characteristics of the catalysts are presented, and the employed equipment is described. It is designed for engineering-technical workers of enterprises of the nitrogen and other sectors of industry, for specialists working in the scientific research and planning institutes, design offices and other organizations, as well as for teachers of higher educational institutions and students specializing in the field of the technology of inorganic products.

Analytical procedures for the determination of disperse azo dyes

Energy Technology Data Exchange (ETDEWEB)

Betowski, L.D.; Jones, T.L. (Environmental Protection Agency, Las Vegas, NV (USA)); Munslow, W.; Nunn, N.J. (Lockheed Engineering and Management Services Co., Las Vegas, NV (USA))

1988-09-01

Disperse Blue 79 is the most widely-used azo dye in the US. Its economic importance for the dye industry and textile industry is very great. Because of its use and potential for degradation to aromatic amines, this compound has been chosen for testing by the Interagency Testing Committee. The authors laboratory has been developing methods for the analytical determination of Disperse Blue 79 and any possible degradation products in wastewater. This work has been taking place in conjunction with the study of the fate of azo dyes in the wastewater treatment processes by the Water Engineering Research Laboratory of the US EPA in Cincinnati. There were various phases for this analytical development. The first step involved purifying the commercial material or presscake to obtain a standard for quantitative determination. A combination of HPLC, TLC and mass spectrometric methods was used to determine purity after extraction and column cleanup. Phase two involved the extraction of the dye from the matrices involved. The third phase was the actual testing of Disperse Blue 79 in the waste activated sludge system and anaerobic digester. Recovery of the dye and any degradation products at each sampling point (e.g., secondary effluent, waste activated sludge) was the goal of this phase.

SOCIAL DETERMINANTS OF PROFESSIONAL ETHICS AMONG WORKERS IN INDUSTRIAL UNITS (A CASE STUDY OF INDUSTRIAL WORKERS IN ARDABIL

Directory of Open Access Journals (Sweden)

Davoud Abdollahi

2012-12-01

Full Text Available Professional ethics is a factor that is under the influence of external factors and with the help of individual conscience causes adherence in a person. As professional ethics is properly guided and strengthened by social or environmental elements, its effects will appear on the output or final product in a desirable way. The present study examines the social influential factors on individual’s level of professional ethics in the workplace. For this purpose, 400 workers in both branches of industrial townships of Ardabil participated in this study. The data for this study was collected from administering a researcher-made questionnaire (consisting of 78 questions, interview, and observation. The findings revealed that socio-cultural factors primarily and individual-personality factors secondarily, affect the person’s work ethics. In addition, social factors such as intimate relationship, gender, education, skill, income, religious belief, and job stability have a positive impact on a person's work ethics.

A kinetic study of textile dyeing wastewater degradation by Penicillium chrysogenum.

Science.gov (United States)

Durruty, Ignacio; Fasce, Diana; González, Jorge Froilán; Wolski, Erika Alejandra

2015-06-01

The potential of Penicillium chrysogenum to decolorize azo dyes and a real industrial textile wastewater was studied. P. chrysogenum was able to decolorize and degrade three azo dyes (200 mg L(-1)), either independently or in a mixture of them, using glucose as a carbon source. A kinetic model for degradation was developed and it allowed predicting the degradation kinetics of the mixture of the three azo dyes. In addition, P. chrysogenum was able to decolorize real industrial wastewater. The kinetic model proposed was also able to predict the decolorization of the real wastewater. The calibration of the proposed model makes it a useful tool for future wastewater facilities' design and for practical applications.

Risk management strategy to increase the safety of workers in the nanomaterials industry

Energy Technology Data Exchange (ETDEWEB)

Ling, Min-Pei, E-mail: lingmp@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung 40402, Taiwan, ROC (China); Lin, Wei-Chao; Liu, Chia-Chyuan [Department of Cosmetic Science, Chia Nan University of Pharmacy and Science, Tainan 71710, Taiwan, ROC (China); Huang, Yi-Shiao; Chueh, Miao-Ju [Industrial Safety and Health Association of the ROC, Taipei 11670, Taiwan, ROC (China); Shih, Tung-Sheng [Institute of Occupational Safety and Health, Council of Labor Affairs, Taipei 22143, Taiwan, ROC (China)

2012-08-30

Highlights: Black-Right-Pointing-Pointer On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. Black-Right-Pointing-Pointer The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). Black-Right-Pointing-Pointer According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. Black-Right-Pointing-Pointer The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are

Risk management strategy to increase the safety of workers in the nanomaterials industry

International Nuclear Information System (INIS)

Ling, Min-Pei; Lin, Wei-Chao; Liu, Chia-Chyuan; Huang, Yi-Shiao; Chueh, Miao-Ju; Shih, Tung-Sheng

2012-01-01

Highlights: ► On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. ► The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). ► According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. ► The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are confident that our risk management strategy can be effectively reduced engineered NM industries risks for

The association between socioeconomic characteristics and consumption of food items among Brazilian industry workers.

Science.gov (United States)

Vinholes, Daniele B; Melo, Ione M F; Machado, Carlos Alberto; de Castro Chaves, Hilton; Fuchs, Flavio D; Fuchs, Sandra C

2012-01-01

Dietary pattern plays a causative role in the rising of noncommunicable diseases. The SESI (Serviço Social da Indústria) study was designed to evaluate risk factors for noncommunicable diseases. We aimed to describe food items consumed by Brazilian workers and to assess their association with socioeconomic status. Cross-sectional study was carried out among Brazilian industrial workers, selected by multistage sampling, from 157 companies. Interviews were conducted at the work place using standardized forms. 4818 workers were interviewed, aged 35.4 ± 10.7 years, 76.5% were men. The workers had an average of 8.7 ± 4.1 years of schooling and 25.4 ± 4.1 kg/m² of BMI. Men and individuals with less than high school education were less likely to consume dairy products, fruits, and vegetables daily, even after control for confounding factors. Men consumed rice and beans daily more often than women. In comparison to workers aged 50-76 years, those under 30 years old consumed less fruits and green leafy vegetables daily. The food items consumed by Brazilian workers show that there are insufficient consumption according to the guidelines of healthy foods, particularly of dairy products, vegetables, and fruits.

[Association between sense of coherence and occupational stress of workers in modern service industry in Shanghai, China].

Science.gov (United States)

Lu, X Y; Dai, J M; Wu, N; Shu, C; Gao, J L; Fu, H

2016-10-20

Objective: To investigate understand the current status of the sense of coherence and occupational stress in modern service workers, and to analyze the association between occupational stress and the sense of coherence. Methods: From March to April, 2016, 834 modern service workers from 3 companies in Shanghai, China (in air transportation industry, marketing industry, and travel industry) were surveyed by non-ran-dom sampling. The self-completion questionnaires were filled out anonymously given the informed consent of the workers. The occupational stress questionnaire was used to evaluate occupational stress, and the Chinese version of the Sense of Coherence Scale (SOC-13) was used to assess the mental health. Results: The mean score for the sense of coherence of the respondents was 61.54±10.46, and 50.1% of them were self-rated as having occupational stress. There were significant differences in SOC score between groups with different ages, marital status, positions, lengths of service, family per capita monthly income, and weekly work hours ( P occupational stress score differed significantly across groups with different marital status, lengths of service, and weekly work hours ( P occupational stress differed significantly between groups with different SOC levels ( Poccupational stress. High SOC is a protective factor for occupational stress ( OR =0.39, 95% CI 0.26~ 0.59). Conclusion: Modern service workers in Shanghai have high SOC and moderate occupational stress. Therefore, improving SOC may reduce occupational stress.

Absenteeism following a workplace intervention for older food industry workers.

Science.gov (United States)

Siukola, A; Virtanen, P; Huhtala, H; Nygård, C-H

2011-12-01

The effects of workplace interventions on sickness absence are poorly understood, in particular in ageing workers. To analyse the effects of a senior programme on sickness absence among blue-collar food industry workers of a food company in Finland. We followed up 129 employees aged 55 years or older, who participated in a senior programme (intervention group), and 229 employees of the same age from the same company who did not participate (control group). Total sickness absence days and spells of 1-3, 4-7, 8-21 and >21 days were recorded for the members of the intervention group from the year before joining the programme and for the control group starting at age 54 years. Both groups were followed for up to 6 years. The median number of sickness absence days per person-year increased significantly from baseline in both groups during the follow-up. Compared with the control group, the intervention group had increased risk for 1-3 days spells [rate ratio 1.34 (1.21-1.48)] and 4-7 days spells [rate ratio 1.23 (1.07-1.41)], but the risk for >21 days spells was decreased [rate ratio 0.68 (0.53-0.88)] after participation in the senior programme. A programme to enhance individual work well-being in ageing workers may increase short-term but reduce long-term sickness absence.

Far from Home, But at Home: Indian Migrant Workers in the Iranian Oil Industry

NARCIS (Netherlands)

Atabaki, T.

2015-01-01

This article revisits the life and times of Indian migrant workers in Persia/Iran during the first half of the twentieth century, and discusses their contributions to the founding, development and eventual consolidation of the Persian/Iranian oil industry. A number of factors that shaped this

Accident Prevention: A Workers' Education Manual.

Science.gov (United States)

International Labour Office, Geneva (Switzerland).

Devoted to providing industrial workers with a greater knowledge of precautionary measures undertaken and enforced by industries for the protection of workers, this safety education manual contains 14 lessons ranging from "The Problems of Accidents during Work" to "Trade Unions and Workers and Industrial Safety." Fire protection, safety equipment…

Evaluation of the nutritional status of workers of transformation industries adherent to the Brazilian Workers' Food Program. A comparative study.

Directory of Open Access Journals (Sweden)

Ingrid W Leal Bezerra

Full Text Available The objective of this study was to assess whether the Brazilian Workers' Food Program (WFP is associated with changes in the nutritional status of workers in the transformation industry. We conducted a cross-sectional, observational, comparative study, based on prospectively collected data from a combined stratified and two-stage probability sample of workers from 26 small and medium size companies, 13 adherent and 13 non-adherent to the WFP, in the food, mining and textile sectors. Study variables were body mass index (BMI, waist circumference (WC, and dietary intake at lunch obtained by 24-hour dietary recall. Data were analyzed with nested mixed effects linear regression with adjustment by subject variables. Sampling weights were applied in computing population parameters. The final sample consisted of 1069 workers, 541 from WFP-adherent and 528 from WFP non-adherent companies. The groups were different only in education level, income and in-house training. Workers in WFP-adherent companies have greater BMI (27.0 kg/m2 vs. 26.0 kg/m2, p = 0.002 and WC (87.9 cm vs. 86.5, p = 0.04, higher prevalence of excessive weight (62.6% vs. 55.5%, p<0.001 and of increased WC (49.1% vs. 39.9%. Workers of WFP companies have lower intake of saturated fat (-1.34 g, p<0.01 and sodium (-0.3 g, p<0.01 at lunch. In conclusion, this study showed that workers of companies adherent to the Brazilian WFP have greater rates of excessive weight and increased cardiovascular risk-a negative finding-as well as lower intake of sodium and saturated fat-a positive finding. Therefore, the WFP needs to be revisited and its aims redefined according to the current epidemiological status of the target population of the program.

Decolorization and Degradation of Batik Dye Effluent using Ganoderma lucidum

Science.gov (United States)

Pratiwi, Diah; Indrianingsih, A. W.; Darsih, Cici; Hernawan

2017-12-01

Batik is product of traditional Indonesia culture that developed into a large textile industry. Synthetic dyes which widely used in textile industries including batik. Colour can be removed from wastewater effluent by chemical, physical, and biology methods. Bioremediation is one of the methods that used for processing colored effluent. Isolated White-rot fungi Ganoderma lucidum was used for bioremediation process for batik effluent. G. lucidum was developed by G. lucidum cultivation on centers of mushroom farmer Media Agro Merapi Kaliurang, Yogyakarta. The batik effluent was collected from a private small and medium Batik enterprises located at Petir, Rongkop, Gunungkidul Regency. The aim of the study were to optimize decolorization of Naphtol Black (NB) using G. lucidum. The effect of process parameters like incubation time and dye concentration on dye decolorization and COD degradation was studied. G. lucidum were growth at pH 5-6 and temperature 25°C at various Naphtol Black dye with concentration 20 ppm, 50 ppm, and 100 ppm for 30 day incubation time. The result from this study increased decolorization in line with the increasing of COD degradation. Increasing percentage of decolorization and COD degradation gradually increased with incubation time and dye concentration. The maximum decolorization and COD reduction were found to be 60,53% and 81,03%. G. lucidum had potential to decolorized and degraded COD for NB dye effluent on higher concentration.

Simultaneous adsorption of dyes and heavy metals from multicomponent solutions using fly ash

International Nuclear Information System (INIS)

Visa, Maria; Bogatu, Cristina; Duta, Anca

2010-01-01

In wastewaters originating from dye industry there are amounts of dyes (very common methyl orange, methylene blue-MB) and heavy metals (cadmium, copper, nickel mainly from the organo-metallic dyes). They tend to adsorb in a competitive process and modify the substrate. Advanced removal is usually proposed via adsorption and the use of modified fly ash as a substrate is sustainable solution. The main constituents of fly ash (silica, alumina, iron oxide and un-burned carbon), are the priority compounds which favour the heavy metal adsorption and are active sites in dyes' adsorption processes. The paper studies the effect of MB adsorbed on the fly ash surface on the removal efficiency of cadmium, copper and nickel ionic species from complex, multi-cationic dye solutions. The adsorption efficiency and kinetics are evaluated from the complex, multicomponent systems and possible influences are discussed. High efficiencies are obtained at low heavy metal concentrations (as it is the real case for the dyes industry) whereas at medium values, competitive processes lower the individual efficiencies of copper, nickel or cadmium from mixtures.

Aerobic decolourization of two reactive azo dyes under varying ...

African Journals Online (AJOL)

Bacillus cereus isolated from dye industrial waste, that is, effluent and soil samples was screened for its ability to decolourize two reactive azo dye – cibacron black PSG and cibacron red P4B under aerobic conditions at pH 7 and incubated at 35°C over a five day period. Different carbon and nitrogen sources were used for ...

Musculoskeletal disorders and psychosocial risk factors among workers of the aircraft maintenance industry.

Science.gov (United States)

Nogueira, Helen Cristina; Diniz, Ana Carolina Parise; Barbieri, Dechristian França; Padula, Rosimeire Simprini; Carregaro, Rodrigo Luiz; de Oliveira, Ana Beatriz

2012-01-01

During the recent decades Brazil has experienced an exponential growth in the aviation sector resulting in an increasing workforce. The aircraft maintenance industry stands out, where the workers have to handle different kind of objects. The aim of this study was to evaluate psychosocial indicators as well as musculoskeletal symptoms and disorders among aircraft maintenance workers. One hundred and one employees were evaluated (32.69 ± 8.25 yr, 79.8 ± 13.4 kg, and 1.75 ± 0.07 m). Musculoskeletal symptoms and disorders were assessed through the Nordic Musculoskeletal Questionnaire (NMQ) and a standardized physical examination. The Job Content Questionnaire (JCQ) and the Utrecht Work Engagement Scale (UWES) were applied to evaluate psychosocial indicators. Results of the NMQ indicate the lower back as the most affected body region. On the other hand, the physical examination has shown clinical diagnosis of shoulder disorders. Neck, upper back and ankle/foot were also reported as painful sites. Most of workers have active work-demand profile and high work engagement levels. We suggest that musculoskeletal symptoms may be related to high biomechanical demand of the tasks performed by workers, what must be further investigated.

Migration and Health in the Construction Industry: Culturally Centering Voices of Bangladeshi Workers in Singapore.

Science.gov (United States)

Dutta, Mohan J

2017-01-29

Construction workers globally face disproportionate threats to health and wellbeing, constituted by the nature of the work they perform. The workplace fatalities and lost-time injuries experienced by construction workers are significantly greater than in other forms of work. This paper draws on the culture-centered approach (CCA) to dialogically articulate meanings of workplace risks and injuries, voiced by Bangladeshi migrant construction workers in Singapore. The narratives voiced by the participants suggest an ecological approach to workplace injuries in the construction industries, attending to food insecurity, lack of sleep, transportation, etc. as contextual features of work that shape the risks experienced at work. Moreover, participant voices point to the barriers in communication, lack of understanding, and experiences of incivility as features of work that constitute the ways in which they experience injury risks. The overarching discourses of productivity and efficiency constitute a broader climate of threats to worker safety and health.

Analysis of the use of biomass as an energy alternative for the Portuguese textile dyeing industry

International Nuclear Information System (INIS)

Nunes, L.J.R.; Matias, J.C.O.; Catalão, J.P.S.

2015-01-01

The energy efficiency and the development of environmentally correct policies are current topics, especially when applied to the industrial sector with the objective of increasing the competitiveness of the enterprises. Portuguese textile dyeing sector, being a major consumer sector of primary energy, needs to adopt measures to improve its competitiveness. Biomass appears to be a viable and preferred alternative energy source for the sector, while simultaneously develops an entire forest industry devoted to the supply of forest solid fuels. This work carries out a comprehensive PEST (political, economic, social and technological) analysis, which analyses Political, Economic, Social and Technological aspects of the replacement of the fossil fuels traditionally used in this sector by biomass, providing a framework of environmental factors that influence the strategic management of the companies. The main advantages are the reduction of external dependence on imported fuel due to the use of an endogenous renewable resource, the creation and preservation of jobs, the increased competitiveness of the sector by reducing energy costs, the use of national technology and the reduction of greenhouse gases emissions. - Highlights: • The Portuguese textile dyeing sector, being a major consumer sector of primary energy, is addressed. • Biomass is a viable and preferred alternative energy source for the sector. • A PEST (political, economic, social and technological) analysis is carried out. • The implications of the replacement of fossil fuels with biomass are studied

Industrialization Impact on Worker Mobility and Land Use in Peri Urban Area (Case study of Semarang District, Indonesia)

Science.gov (United States)

Wijaya, H. B.; Kurniawati, H.; Hutama, S. T. E. W.

2018-02-01

In many cases, industrialization has stimulated the urbanization process massively. It tends to attract substantial number of labor migrants from nearby region to fulfill the demand of workers. The paper reports the research result of industrialization phenomena in Semarang district, Indonesia. It carried out the survey by taking 250 samples of migrant workers. The result shows that the presence of labor-intensive industries becomes the most influence factor for many migrants, rather than the driving factors from the place of origin. The attraction factor could cover regional and across the province force, as indicated that all migrant respondents come from both inside and outside of Central Java Province. Furthermore, based on the land-use distribution of the migrant settlement area, it indicates a growing land-use change, both of land cover and land functions.

Organic Semiconductors based on Dyes and Color Pigments.

Science.gov (United States)

Gsänger, Marcel; Bialas, David; Huang, Lizhen; Stolte, Matthias; Würthner, Frank

2016-05-01

Organic dyes and pigments constitute a large class of industrial products. The utilization of these compounds in the field of organic electronics is reviewed with particular emphasis on organic field-effect transistors. It is shown that for most major classes of industrial dyes and pigments, i.e., phthalocyanines, perylene and naphthalene diimides, diketopyrrolopyrroles, indigos and isoindigos, squaraines, and merocyanines, charge-carrier mobilities exceeding 1 cm(2) V(-1) s(-1) have been achieved. The most widely investigated molecules due to their n-channel operation are perylene and naphthalene diimides, for which even values close to 10 cm(2) V(-1) s(-1) have been demonstrated. The fact that all of these π-conjugated colorants contain polar substituents leading to strongly quadrupolar or even dipolar molecules suggests that indeed a much larger structural space shows promise for the design of organic semiconductor molecules than was considered in this field traditionally. In particular, because many of these dye and pigment chromophores demonstrate excellent thermal and (photo-)chemical stability in their original applications in dyeing and printing, and are accessible by straightforward synthetic protocols, they bear a particularly high potential for commercial applications in the area of organic electronics. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Area Factor Determinations for an Industrial Worker Exposed to a Concrete Slab End-State

International Nuclear Information System (INIS)

Jannik, G. Timothy; Lee, Patricia L.; Farfan, Eduardo B.; Roach, Jesse L.

2008-01-01

The U.S. Department of Energy's (DOE) Savannah River Site (SRS) is decommissioning many of its excess facilities through removal of the facility structures leaving only the concrete-slab foundations in place. Site-specific, risk-based derived concentration guideline levels (DCGLs) for radionuclides have been determined for a future industrial worker potentially exposed to residual contamination on these concrete slabs as described in Jannik. These risk-based DCGLs were estimated for an exposure area of 100 m 2 . During deactivation and decommissioning (D and D) operations at SRS, the need for area factors for larger and smaller contaminated areas arose. This paper compares the area factors determined for an industrial worker exposed to a concrete slab end-state for several radionuclides of concern at SRS with 1) the illustrative area factors provided in MARSSIM, 2) the area correction factors provided in the U.S. Environmental Protection Agency's (EPA) Soil Screening Guidance, and 3) the hot spot criterion for field application provided in the RESRAD User's Manual. The purpose of this site-specific assessment is to determine if any of the recommended area factors provided in the guidance documents could be utilized at SRS for field applications of the industrial worker DCGLs. Results show the area factors that were determined for an SRS industrial worker exposed to concrete slab end-states for the common radionuclides provided in the referenced guidance documents. In addition to the SRS site-specific area factors, the following area factors are provided for comparison: - Illustrative examples of outdoor area dose factors (MARSSIM); - Area correction factors as a function of source area (Soil Screening Guidance). Note: the area correction factors were inverted to correspond to a DCGL area factor. - Recommended area correction factors as a function of source area (Soil Screening Guidance); - Ranges for hot spot multiplication factors (RESRAD). As it can be seen

Radiochromic dye film for ionizing and non ionizing radiation dosimetry

International Nuclear Information System (INIS)

Said, F.I.; Elbahay, A.Z.

1984-01-01

During the present study different types of radiochromic dye films have been investigated for γ-ray as well as ultraviolet radiation dosimetry. The technique is based on the change in absorption spectra for dosed samples with special emphasis at optical absorption bands observed at 510nm and 605nm. Dose response of different types of radiochromic dye films was determined in the range between 1 to 40 KGy γ rays. The technique is used for γ-ray dosimetry in processing with high quality. The increasing use of U.V. light in industry and medicine makes it necessary to have simple practical methods for U.V. dosimetry. To this purpose radiochromic dye films are suggested for the first time. The response was investigated for emission consisted mainly of 254 and 366nm photons over the range from 50-700 m W.S. cm -2 . The experimental results indicate that radiochromic dye films are practical and simple technique for γ-ray and U.V. dosimetry for industrial and medical applications

Migration and Health in the Construction Industry: Culturally Centering Voices of Bangladeshi Workers in Singapore

Science.gov (United States)

Dutta, Mohan J.

2017-01-01

Construction workers globally face disproportionate threats to health and wellbeing, constituted by the nature of the work they perform. The workplace fatalities and lost-time injuries experienced by construction workers are significantly greater than in other forms of work. This paper draws on the culture-centered approach (CCA) to dialogically articulate meanings of workplace risks and injuries, voiced by Bangladeshi migrant construction workers in Singapore. The narratives voiced by the participants suggest an ecological approach to workplace injuries in the construction industries, attending to food insecurity, lack of sleep, transportation, etc. as contextual features of work that shape the risks experienced at work. Moreover, participant voices point to the barriers in communication, lack of understanding, and experiences of incivility as features of work that constitute the ways in which they experience injury risks. The overarching discourses of productivity and efficiency constitute a broader climate of threats to worker safety and health. PMID:28146056

Relationship between productivity, quality and musculoskeletal disorder risk among deboning workers in a Chilean salmon industry.

Science.gov (United States)

Ilardi, Juan S

2012-01-01

The purpose of this ergonomic investigation is to establish a relationship between quality, productivity and risk of musculoskeletal disorder (MSD) in manual bone-removal process in the salmon fish industry. The method consists in a follow up study of 14 workers in a lane that processes salmon steak. Time between each steak (work cycle), quality of the steak's meat through inspection of deepness and length of the gapping generated by the manual bone-removal process and risk for musculoskeletal disorders through OCRA method were considered for this study. IMC and musculoskeletal Nordic Questionnaire of Kourinka were applied to the workers evaluated. Fourteen women worker's completed the evaluation, age 37.67 ± 8.1, with 65.27 ± 34.41 months of experience, with an IMC of 27.18 ± 3.87 (1.52 ± 0.057 meters of height) at the time of the evaluation. Time for deboning per steak averaged 38 ± 14 seconds with 68.33 ± 14.79 steaks per hour per worker. In quality terms, 74% of the steaks were qualified as "premium steaks" and 26% as "grade or industrial" (lower category and cheapest price). OCRA index for the right hand average 13.79 ± 4.59 and 3.59 ± 0.41 for the left hand. From Nordic questionnaire 80% of the workers manifested musculoskeletal symptoms in the right hand/wrist, followed up by shoulder with 60% of the workers and arm/elbow with over 50%. There was no statistically significant relationship between productivity and quality of the steak after manual bone removal process and between quality and MSD risk. However, there was a statistically significant relationship between productivity and MSD risk (pproductive sector, considering its importance for this region.

Decomposition and decoloration of a direct dye by electron beam radiation

International Nuclear Information System (INIS)

Vahdat, Ali; Bahrami, S.H.; Arami, M.; Motahari, A.

2010-01-01

The wastewaters released by textile industries to the environment contain hazardous compounds like toxic refractory dye stuff at high concentration. In this study, electron beam irradiation-induced decoloration and decomposition of C.I. Direct Black 22 aqueous solutions were investigated. The influences of absorbed doses and initial dye concentration on the percent of decoloration, COD and pH of the solutions are described. The results show that the direct dye solutions can be effectively degraded by electron beam irradiation.

Matching New Jobs to Rural Workers.

Science.gov (United States)

Gillis, William R.; Shaffer, Ron E.

1987-01-01

Written to help communities boost their economies by attracting new industries best suited for local workers, this guide discusses the kinds of employees used by different kinds of industry and highlights specific industry hiring preferences, attributes of various industries, and worker characteristics. (JHZ)

The relationshipbetweenjob satisfactionwith general healthand job burnout workers inanautomotive industry

Directory of Open Access Journals (Sweden)

2013-02-01

Material and Method: This study was a descriptive - analytical study conducted among. 120 workers in an automobile manufacturing industry in Tehran.the samples were selected using simple sampling method. Data were collected using, job satisfaction questionnaire Barry field, GHQ-28 and self-evaluation scale questionnaire. The data were analyzed using SPSS software. . Result: In this study 95% of individuals had low job satisfaction and moderated. In addition, 73/6% significant of people were likely to burnout, and 55% were people with mental health disorders. There was Inverse relationship between job satisfaction and general health the whole item. The direct correlation between the variables of general health and burnout, and there was a significant variable. The inverse relationship between job satisfaction and burnout, there was significant. . Conclusion: Given the obvious relationship between burnout and job satisfaction with public health, industry executives need to learn and improve incentive programs to promote employment, human relations and feelings of efficacy and bring into force.

The 15-Country Collaborative Study of Cancer Risk among Radiation Workers in the Nuclear Industry

DEFF Research Database (Denmark)

Cardis, E; Vrijheid, M; Blettner, M

2007-01-01

A 15-Country collaborative cohort study was conducted to provide direct estimates of cancer risk following protracted low doses of ionizing radiation. Analyses included 407,391 nuclear industry workers monitored individually for external radiation and 5.2 million person-years of follow-up. A sign...

Ergonomics study for workers at food production industry

Directory of Open Access Journals (Sweden)

Mohd Fazi Hamizatun

2017-01-01

Full Text Available The health constraint faced by production workers affects the quality of the work. The productivity of the workers is affected by the Work-related Musculoskeletal Disorder (WMSD which limits the movement of the workers. The comfort workplace condition, known as ergonomic environment is important to prevent the occurrence of the WMSD. Proper ergonomic workplace considers the condition of the workers while doing the assigned work. The objectives of this study are to identify the current problems related to ergonomic in food production process, to analyse the actual production data by using Rapid Upper Limb Assessment (RULA and Rapid Entire Body Assessment (REBA and to recommend the ergonomic workplace environment based on the condition of the study. The study was done at a Small and Medium Enterprises (SME food production company in the Klang Valley of Malaysia. The condition of the workers affects the productivity of the company due to workers’ health deficiency. From the findings, the workers are exposed to the awkward postures which leads to the Work-Musculoskeletal Disorders (WMSDs. Besides, the best height of the worker at the study area (critical area to prevent the worker from WMSDs is within 155 cm to 160 cm. The results show that the workers are exposed to the WMSD in different level of risks which causes high absenteeism among the workers.

Assessment of periodontal status in smokeless tobacco chewers and nonchewers among industrial workers in North Bengaluru

Directory of Open Access Journals (Sweden)

Dinta Kathiriya

2016-01-01

Full Text Available Introduction: More than one-third of the tobacco consumed in India is of smokeless form. While the smokeless tobacco (ST products have been strongly associated with oral cancer, the association between ST and periodontal disease is less clear. The present study was conducted on industrial workers because in premises, there is a ban on smoking tobacco and hence workers tend to consume more of ST products. Aim: The aim of this study is to assess periodontal status in ST chewers and nonchewers among industrial workers in North Bengaluru. Materials and Methods: A cross-sectional analytical study was conducted on 800 industrial workers (400 ST chewers and 400 nonchewers of North Bengaluru. Information regarding ST habits was obtained using the Global Adult Tobacco Survey questionnaire, followed by clinical examination to assess periodontal status using the community periodontal index and attachment loss. The comparison between chewers and nonchewers was done using Pearson's Chi-square test. Logistic regression analysis was used to estimate the difference of periodontal status and loss of attachment (LOA between chewers and nonchewers. Results: ST chewing habit was observed the maximum (46.5% among age group 25–44 years. Most of male chewers had habit of chewing gutkha followed by khaini, and majority of the female chewers were using khaini followed by betel nut quid. A significantly higher prevalence of bleeding on probing and calculus was found among nonchewers. ST chewers had 2.06 (95% confidence interval [CI]: 1.55–2.75 times more risk of developing periodontal pockets and 2.23 (95% CI: 1.68–2.98 times more risk of having LOA when compared with nonchewers. Conclusions: ST has deleterious effects on the periodontium. Hence, it is one of the important risk factors for periodontal disease.

Prevalence and characterization of methicillin-resistant Staphylococcus aureus isolates in food industry workers.

Science.gov (United States)

Caggiano, G; Dambrosio, A; Ioanna, F; Balbino, S; Barbuti, G; De Giglio, O; Diella, G; Lovero, G; Rutigliano, S; Scarafile, G; Baldassarre, A; Vimercati, L; Musti, M; Montagna, M T

2016-01-01

Methicillin-resistant S. aureus (MRSA) is a pathogen spread not only in the hospital environment but also in the community and amongst livestock (LA-MRSA). LA-MRSA can be transmitted to humans that live in close contact with MRSA-colonized animals, and human colonization and/or infection has been reported worldwide, particularly among those involved with livestock farming. In this study the authors evaluated the prevalence of S. aureus and MRSA among healthy carriers who worked in the food industry in Apulia, Southern Italy. Nasal swabs were taken from pasta and pork industry workers. All swab samples were subjected to tests for the isolation, identification and typing of S. aureus and MRSA strains. The identification of the strains was confirmed by molecular assessment using multiplex-PCR for the amplification of the nuc and mecA genes. The strains identified as MRSA were then subjected to a PCR protocol for the characterization of sequence type ST398. In total 26.3% of examined nasal swabs were positive for S. aureus, 8.2% of them were methicillin resistant strains and 28.5% of MRSA isolates were characterized as ST398. The MRSA prevalence among pork factory workers was 3% , whereas among the pasta operators the prevalence was 11.5. The presence of S. aureus and MRSA among food workers represents a public health risk. Further, considering the dissemination of S. aureus and MRSA among non-nosocomial environments, including communities and livestock, careful surveillance and continuous monitoring of the emergence of MRSA is fundamental for safeguarding public health.

Depression, anxiety and stress levels in industrial workers: A pilot study in Bangalore, India

Directory of Open Access Journals (Sweden)

Sheldon Rao

2015-01-01

Full Text Available Background: Mental health disorders affect around 500 million people worldwide. In India, around 10-12% of people are affected by a mental disorder either due to stress, depression, anxiety, or any other cause. Mental health of workers affects the productivity of the workplace, with estimates putting these losses to be over 100 million dollars annually. Aims: The study aims to measure depression, anxiety, and stress levels of workers in an industry and to investigate if it has any effect on productivity of the firm. Materials and Methods: The study utilized a cross-sectional design and was conducted among workmen of the firm. A sociodemographic based questionnaire and a mental health screening tool -Depression Anxiety Stress Scale (DASS-21 were used for the same. A total of 90 completed questionnaires were analyzed for the study. The data was analyzed for central tendencies as well as for any associations and correlations. Results: The study showed that none of the workers had a positive score for depression. It also showed that around 36% of the workers had a positive score for anxiety and 18% of the workers had a positive score for stress on DASS-21 scale. The odds ratio between stress and number of leaves taken by a worker in the last 3 months suggested a dose-response relationship, but was statistically insignificant. Conclusion: The study found a prevalence rate of around 18-36% for anxiety and stress amongst the workers at the factory. Large-scale studies will help understand the effect mental health status has on the Indian workplace.

Modification of azo dyes by lactic acid bacteria.

Science.gov (United States)

Pérez-Díaz, I M; McFeeters, R F

2009-08-01

The ability of Lactobacillus casei and Lactobacillus paracasei to modify the azo dye, tartrazine, was recently documented as the result of the investigation on red coloured spoilage in acidified cucumbers. Fourteen other lactic acid bacteria (LAB) were screened for their capability to modify the food colouring tartrazine and other azo dyes of relevance for the textile industry. Most LAB modified tartrazine under anaerobic conditions, but not under aerobic conditions in modified chemically defined media. Microbial growth was not affected by the presence of the azo dyes in the culture medium. The product of the tartrazine modification by LAB was identified as a molecule 111 daltons larger than its precursor by liquid chromatography-mass spectrometry. This product had a purple colour under aerobic conditions and was colourless under anaerobic conditions. It absorbed light at 361 and 553 nm. LAB are capable of anabolizing azo dyes only under anaerobic conditions. IMPACT AND SIGNIFICANCE OF THE STUDY: Although micro-organisms capable of reducing the azo bond on multiple dyes have been known for decades, this is the first report of anabolism of azo dyes by food related micro-organisms, such as LAB.

Exploring the Potential of Banana SAP as Dye for the Adinkra ...

African Journals Online (AJOL)

A study was carried out to explore the potential of banana sap as a dye for the Adinkra industry in Ghana. Pseudostem extract of banana and stem bark extract of Bridelia micratha were compared as dyeing stuff. A consumer preference study was also conducted to assess the acceptability of the products developed.

Self-reported well-being and associated factors among industrial workers in Brazil: findings from a national survey

Directory of Open Access Journals (Sweden)

Shana Ginar da Silva

Full Text Available Abstract: The purpose of this study was to estimate self-perception of well-being and associated factors among industrial workers in Brazil. A cross-sectional survey was carried out with a representative sample from 23 Brazilian states and the Federal District. Self-reported of well-being was investigated by questionnaire. Multinomial logistic regression was used in unadjusted and adjusted analyses. For 93% of the 47,477 industrial workers, the perception of well-being was positive. Those who had the highest chances of being in the category of best perception of well-being were: male workers (OR = 1.35; 95%CI: 1.28; 1.43; those aged under thirty years old (OR = 1.24; 95%CI: 1.12; 1.39; those from Southern Brazil (OR = 1.99; 95%CI: 1.83; 2.16; and people with a high income. The prevalence of positive well-being was high. Sociodemographic, behavioral and social support characteristics, as well as the characteristics related to self-report on health were associated with well-being.

Cross sectional survey on association between alcohol, betel- nut, cigarette consumption and health promoting behavior of industrial workers in Ghaziabad.

Science.gov (United States)

Arora, Dimple; Marya, Charu Mohan; Menon, Ipseeta; Oberoi, Sukhvinder Singh; Dhingra, Chandan; Anand, Richa

2015-01-01

The work force in industries are at risk of developing unduly high rates of health and behaviour related problems including abuse of alcohol, betel nut and cigarette (alcohol, betel nut and cigarette consumption). This study describes the relationships between alcohol, betel nut and cigarette consumption and health promoting behaviour among industrial workers. A cross sectional survey was conducted on workers in various industries of Ghaziabad city with concerned authority permission. A sample size of 732 workers was calculated based on pilot study. Through Simple random sampling 732 workers in 20 to 50 years age group with informed consent were interviewed through structured, pretested, validated questionnaire in vernacular language by one calibrated investigator. Data on socio demography, alcohol, betel nut and cigarette consumption pattern and health behaviour were collected. The association between health promoting behaviour and alcohol, betel nut and cigarette consumption was analysed by Logistic regression and Chi-square test through SPSS 16 at pbetel nut and cigarette consumption in study population was 88%. The prevalence of individual alcohol, betel nut and cigarette consumption were 82%, 68% and 79% respectively. Combined alcohol, betel nut and cigarette prevalence in study population was 58%. Alcohol and cigarette users were significantly higher (pbetel nut and cigarette users.

DECOLORIZATION OF TEXTILE DYES BY NEWLY ISOLATED TRAMETES VERSICOLOR STRAIN Sevil PİLATİN, Buket KUNDUHOĞLU

Directory of Open Access Journals (Sweden)

Buket KUNDUHOĞLU

2011-08-01

Full Text Available In this century, the amount of industrial produces and their consumption has increased tremendously. Along with this increase, accumulation of industrial waste and its effect on nature has causedserious problems. Because of including various chemicals and especially dye, textile waste water is one of the most hazardous industrial wastes. Color is the most important pollutant in waste water and it should be decolorized. Decolorization is more important than degradation of organic substances from waste water. Even a small amount of dye found changes the color of rivers, lakes and other waterresources, and reduces the penetration of light and solubility of gases. White rot fungus are used as a biological system in degradation and decolorizing of textile dyes.In this study, parameters for decolorization of several textile dyes (Blue 49, Orange 12, Orange 13, Red 31, Black 5, RBBR by newly isolated Trametes versicolor M96was studied.It has been determined that pH, amount of inoculum, shaking speed (rpm, dye concentration and temperature are important factors in decolorization of the studied dyes. The maximum decolorization was found pH 4.5, amount of inoculums 50 ml, shaking speed 200 rpm, dye concentration 50 mg/l and heat 30 °C.

Survey Situation and Factors Affect on Hearing Protection Large Industry Workers of Hamadan City in 2001-2002

Directory of Open Access Journals (Sweden)

F. Emami

2004-01-01

Full Text Available Noise induced hearing loss in adults is the most cause of sensory neural hearing loss after the presbycusis and industry workers severity affect by degenerative results of that. Three large works of Hamadan city which had more than 200 Workers were selected in this demonstrative quest . The mean of sound pressure level evaluated with sound level meter which amount to 82-95 dB. Total exposed workers with higher noise than 85 dB evaluated by pure tone audiometery and otoscopic evaluation and the means of hearing thresholds in four frequency :0.5,1,2,4 kHz balanced with previously . Method of concentration data was direct observation and questionnaire . 809 workers in local works exposed to invasive noise . 20.02% of them hadn’t any hearing protector and 79.98% had , which combinated of wax or dry cotton and fiber glass (76.20%, earplug (7.42%and earmuff(16.38%. The means of hearing thresholds workers with protector equal to 43.36 dB and without that was equal to 44.03 dB (t=0.29, Pv<0.05. Highest percentage quantity in two groups related to age –bracket 40-49 years old. Women with protection(9.43%were more than without protector(3.7% while the most percentage related to men without protector (96.3% in contrast to 90.57%.In totally highest percentage quantity of NIHL was in workers with past-working more than 15 years (67.54% with protector , 67.28%without protector. For awareness of degenerative results the noise in hearing large industry workers of Hamadan city 75% insignificant and 25% had efficient awareness . Not using of protectors by 20.2% of worker showing light awareness to degenerative results of noise on hearing system and poor educational healthing and noting difference in means of hearing loss at protected group on basis duration of using that, strikes the process of hearing conservation program is superficial.

Removal of industrial dyes and heavy metals by Beauveria bassiana: FTIR, SEM, TEM and AFM investigations with Pb(II).

Science.gov (United States)

Gola, Deepak; Malik, Anushree; Namburath, Maneesh; Ahammad, Shaikh Ziauddin

2017-10-01

Presence of industrial dyes and heavy metal as a contaminant in environment poses a great risk to human health. In order to develop a potential technology for remediation of dyes (Reactive remazol red, Yellow 3RS, Indanthrene blue and Vat novatic grey) and heavy metal [Cu(II), Ni(II), Cd(II), Zn(II), Cr(VI) and Pb(II)] contamination, present study was performed with entomopathogenic fungi, Beauveria bassiana (MTCC no. 4580). High dye removal (88-97%) was observed during the growth of B. bassiana while removal percentage for heavy metals ranged from 58 to 75%. Further, detailed investigations were performed with Pb(II) in terms of growth kinetics, effect of process parameters and mechanism of removal. Growth rate decreased from 0.118 h -1 (control) to 0.031 h -1 , showing 28% reduction in biomass at 30 mg L -1 Pb(II) with 58.4% metal removal. Maximum Pb(II) removal was observed at 30 °C, neutral pH and 30 mg L -1 initial metal concentration. FTIR analysis indicated the changes induced by Pb(II) in functional groups on biomass surface. Further, microscopic analysis (SEM and atomic force microscopy (AFM)) was performed to understand the changes in cell surface morphology of the fungal cell. SEM micrograph showed a clear deformation of fungal hyphae, whereas AFM studies proved the increase in surface roughness (RSM) in comparison to control cell. Homogenous bioaccumulation of Pb(II) inside the fungal cell was clearly depicted by TEM-high-angle annular dark field coupled with EDX. Present study provides an insight into the mechanism of Pb(II) bioremediation and strengthens the significance of using entomopathogenic fungus such as B. bassiana for metal and dye removal.

Ozo-Dyes mixture degradation in a fixed bed biofilm reactor packed with volcanic porous rock

International Nuclear Information System (INIS)

Contreras-Blancas, E.; Cobos-Vasconcelos, D. de los; Juarez-Ramirez, C.; Poggi-Varaldo, H. M.; Ruiz-Ordaz, N.; Galindez-Mayer, J.

2009-01-01

Textile industries discharge great amounts of dyes and dyeing-process auxiliaries, which pollute streams and water bodies. Several dyes, especially the ones containing the azo group, can cause harmful effects to different organisms including humans. Through bacterial and mammalian tests, azo dyes or their derived aromatic amines have shown cell genotoxicity. The purpose of this work was to evaluate the effect of air flow rate on azo-dyes mixture biodegradation by a microbial community immobilized in a packed bed reactor. (Author)

Ozo-Dyes mixture degradation in a fixed bed biofilm reactor packed with volcanic porous rock

Energy Technology Data Exchange (ETDEWEB)

Contreras-Blancas, E.; Cobos-Vasconcelos, D. de los; Juarez-Ramirez, C.; Poggi-Varaldo, H. M.; Ruiz-Ordaz, N.; Galindez-Mayer, J.

2009-07-01

Textile industries discharge great amounts of dyes and dyeing-process auxiliaries, which pollute streams and water bodies. Several dyes, especially the ones containing the azo group, can cause harmful effects to different organisms including humans. Through bacterial and mammalian tests, azo dyes or their derived aromatic amines have shown cell genotoxicity. The purpose of this work was to evaluate the effect of air flow rate on azo-dyes mixture biodegradation by a microbial community immobilized in a packed bed reactor. (Author)

Industrial energy thrift scheme. Report No. 16. Energy use in the knitting industry

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

The knitting industry includes organizations concerned with hosiery, other weft knitted goods and warp-knitting and in some cases also with subsequent dyeing and finishing of knitted goods. In 1976, the industry had 116,000 employees located at approximately 600 sites, mostly in the East Midlands. The total energy consumption of the industry in 1976 was estimated to be 12,180 TJ. Sites with dyeing and finishing interests could save 15% of their energy. The major sources of savings (6%) are by recovering process heat which is currently wasted and from better process control. Other significant savings (5%) are possible from better control, maintenance and insulation of boilers and pipes. Attention to better housekeeping, to controlling draughts and to space heating generally could account for a further 3.5% saving in energy. Sites without dyeing and finishing interests could save 13% of the total energy used by this group. The most important opportunities are better control of space heating (5.5%) and better control and insulation of boilers, pipes and services (5%). These sites have fewer opportunities to recover heat from processes (2%) than where dyeing and finishing takes place but opportunities do exist.

Graphene-coated polystyrene-divinylbenzene dispersive solid-phase extraction coupled with supercritical fluid chromatography for the rapid determination of 10 allergenic disperse dyes in industrial wastewater samples.

Science.gov (United States)

Lou, Chaoyan; Wu, Can; Zhang, Kai; Guo, Dandan; Jiang, Lei; Lu, Yang; Zhu, Yan

2018-05-18

Allergenic disperse dyes are a group of environmental contaminants, which are toxic and mutagenic to human beings. In this work, a method of dispersive solid-phase extraction (d-SPE) using graphene-coated polystyrene-divinylbenzene (G@PS-DVB) microspheres coupled with supercritical fluid chromatography (SFC) was proposed for the rapid determination of 10 allergenic disperse dyes in industrial wastewater samples. G@PS-DVB microspheres were synthesized by coating graphene (G) sheets onto polystyrene-divinylbenzene (PS-DVB) polymers. Such novel sorbents were employed in d-SPE for the purification and concentration of allergenic disperse dyes in wastewater samples prior to the determination by SFC with UV detection. To achieve the maximum extraction efficiency for the target dyes, several parameters influencing d-SPE process such as sorbent dosage, extraction time, desorption conditions were investigated. SFC conditions including stationary phase, modifier composition and percentage, column temperature, backpressure and flow rate were optimized to well separate the allergenic disperse dyes. Under the optimum conditions, satisfactory linear relationship (R ≥ 0.9989) was observed with the concentration of dyes ranging from 0.02 to 10.0 μg/mL. The limits of detection (LOD, S/N = 3) for the ten dyes were in the range of 1.1-15.6 ng/mL. Recoveries for the spiked samples were between 89.1% and 99.7% with relative standard deviations (RSD) lower than 10.5% in all cases. The proposed method is time-saving, green, precise and repeatable for the analysis of the target dyes. Furthermore, the application of G@PS-DVB based d-SPE process can be potentially expanded to isolate and concentrate other aromatic compounds in various matrices and supercritical fluid chromatography methodology featuring rapidity, accuracy and green will be an ideal candidate for the analysis of these compounds. Copyright © 2018 Elsevier B.V. All rights reserved.

[The systemic and differential psychoprophylaxis of vascular brain diseases in the workers of an industrial enterprise].

Science.gov (United States)

Andreev, A G

1994-01-01

Basing on epidemiological, prospective and clinicopsychological data obtained on 1900 industrial workers of Nizhni Novgorod city, the system of psychoprophylaxis and psychotherapy of cerebrovascular diseases has been developed. The system of psychoprophylaxis was used with consideration of the disease stage and phase, psychic and psychosomatic status in risk groups, in subjects with initial and apparent symptoms of cerebrovascular failure. The psychoprophylactic system proved effective in the conditions of a large industrial enterprise.

Application of membrane technologies for the treatment of textile wastewater and synthetic textile dyes

International Nuclear Information System (INIS)

Aouni, A.; Bes-Pia, A.; Fersi, C.; Dhahbi, M.; Cuartas-Uribe, B.; Alcaina-Miranda, M. I.

2009-01-01

Textile industry is characterized by using a great variety of chemicals and by large water consumption. In this way, textile effluents contains many types of dyes, detergents, solvents and salts depending on the particular textile mill processes (dyeing, printing, finishing...) and on the raw matter. For those reasons, textile industry is one of the main sources of industrial pollution, producing effluents discharges characterized by high conductivities and chemical oxygen demand (COD) values and strong colour. Process selection and operating conditions are important issues to optimize technically and economically the textile effluent treatment. This work presents the results of the laboratory-scale membrane experiments of textile industry effluents and synthetic textile dyes. Different types of Ultrafiltration (UF) and Nano filtration (NF) membranes were evaluated for permeate flux and their suitability in separating COD, colour, conductivity. Experiments demonstrated that membrane treatment is a very promising advanced treatment option for pollution control for textile industry effluents. The results of this work show that the direct ultrafiltration seems to be a realistic method in the pretreatment of the textile wastewater. In fact, NF process was successfully used to improve permeate quality of synthetic dyeing textile wastewater, but this process presented some limitations in the treatment of textile industry effluents because of membrane fouling problems. So, this process requires an efficient and appropriate technique such as ultrafiltration as a pre-treatment step for textile wastewater reuse. For direct nano filtration of synthetic textile dyes aqueous solutions, with a weak salt concentration (500 ppm), good results were obtained. More than 95 pour cent of color was removed from the treated water accompanied with a reduction of 92 pour cent of conductivity and COD. Based on the experiments; NF membranes are suitable for producing permeate of reusable

A Review on Adsorption of Cationic Dyes using Activated Carbon

Directory of Open Access Journals (Sweden)

Corda Nikita Chrishel

2018-01-01

Full Text Available In this article efficiency of activated carbon as a potent adsorbent of cationic dyes has been reviewed. Non-biodegradable nature of pollutants and their removal in the present generation is a great challenge. Therefore, extensive study on adsorption of these classes of pollutants from water bodies is being carried out. Methylene blue (majorly a dye seen in the effluent streams of textile, printing, paper industries along with some of the commonly used cationic dyes in process industries and their sorption on activated carbon are reviewed here. High cost of commercially activated carbon which is a limitation to its extensive use have paved way for study of adsorption by naturally obtained and extracted activated carbon from agricultural wastes and various other sources. The purpose of this review paper is to summarize the available information on the removal of cationic dyes using naturally extracted and commercially obtained activated carbon. Various parameters such as temperature, initial dye concentration, pH, contact time, adsorbent dosage, particle size, stirring, agitation etc. were studied and the optimum parameters were determined based on the experimental outcomes. Equilibrium data was examined using Langmuir, Freundlich, Temkin and Dubinin–Radushkevich and few other isotherm models. Kinetic studies also have been carried out to find the most suitable way of expressing the adsorption process.

Ocular manifestations in bidi industry workers: Possible consequences of occupational exposure to tobacco dust

Directory of Open Access Journals (Sweden)

Mittal Saurabh

2008-01-01

Full Text Available Tobacco consumption is the leading preventable cause of disease, disability, and premature death but little is known about its deleterious effect on the ocular health of workers handling tobacco. The goal of this study was to identify probable effects of occupational tobacco exposure among south Indian bidi-industry workers. This study included 310 females (mean age, 34.8 ± 10.9 years actively involved in bidi-rolling presenting with eye symptoms to a tertiary eye care hospital. Results suggested that a wide spectrum of ocular complications exist among these workers. Common ocular symptoms were defective vision, dull-aching headache and eye irritation. The main ocular findings were papillary conjunctival hyperplasia, hyperpigmentation of ocular surface, punctate epithelial erosion or superficial punctate keratitis, cataract or pseudophakia and segmental optic atrophy. Abstaining from work, supplementation of Vitamin B complex rich in B 12 and appropriate surgical or medical management reversed visual loss due to corneal disease or cataract but was not effective in optic neuropathy.

STATISTICAL INVESTIGATION OF ADSORPTION OF TWO REACTIVE TEXTILE DYES BY VARIOUS ADSORBENTS

Directory of Open Access Journals (Sweden)

Ümmühan DANIŞ

2002-03-01

Full Text Available Textile industry, in which uses the dyestuffs containing coloured and complex chemical compounds, is both water consumer and water pollutant. The removal of these compounds from the wastewaters is one of the most important problems in the textile industry. In this study, the adsorption of two reactive dyes (Red Px and Yellow P onto Aşkale and Balkaya lignites, Bensan clay and powdered active carbon (PAC from aqueous solution was statistically investigated. The adsorption time, dye concentration, solid/liquid ratio and mixing rate were chosen as parameters. The effects of these parameters on the amount of dye adsorbed by the adsorbents were determined. The results obtained have been statistically evaluated by using the stepwise method and SPSS Sortware version (9.1. The experimental observations and statistical evaluations shown that the effective parameters on the adsorption are equilibrium dye concentration and solid/liquid ratio. It was found that the adsorptive behaviours of both lignites and clay are similar to each other, but powdered active carbon displays different adsorptive behaviour. Finally, the empirical equations showing the relation between amount of dye adsorbed and the effective parameters were developed.

Enhanced photocatalytic performance of CeO2-TiO2 nanocomposite for degradation of crystal violet dye and industrial waste effluent

Science.gov (United States)

Zahoor, Mehvish; Arshad, Amara; Khan, Yaqoob; Iqbal, Mazhar; Bajwa, Sadia Zafar; Soomro, Razium Ali; Ahmad, Ishaq; Butt, Faheem K.; Iqbal, M. Zubair; Wu, Aiguo; Khan, Waheed S.

2018-03-01

This study presents the synthesis of CeO2-TiO2 nanocomposite and its potential application for the visible light-driven photocatalytic degradation of model crystal violet dye as well as real industrial waste water. The ceria-titania (CeO2-TiO2) nanocomposite material was synthesised using facile hydrothermal route without the assistance of any template molecule. As-prepared composite was characterised by SEM, TEM, HRTEM, XRD, XPS for surface features, morphological and crystalline characters. The formed nanostructures were determined to possess crystal-like geometrical shape and average size less than 100 nm. The as-synthesised nanocomposite was further investigated for their heterogeneous photocatalytic potential against the oxidative degradation of CV dye taken as model pollutant. The photo-catalytic performance of the as-synthesised material was evaluated both under ultra-violet as well as visible light. Best photocatalytic performance was achieved under visible light with complete degradation (100%) exhibited within 60 min of irradiation time. The kinetics of the photocatalytic process were also considered and the reaction rate constant for CeO2-TiO2 nanocomposite was determined to be 0.0125 and 0.0662 min-1 for ultra-violet and visible region, respectively. In addition, the as-synthesised nanocomposite demonstrated promising results when considered for the photo-catalytic degradation of coloured industrial waste water collected from local textile industry situated in Faisalabad region of Pakistan. Enhanced photo-catalytic performance of CeO2-TiO2 nanocomposite was proposed owing to heterostructure formation leading to reduced electron-hole recombination.

Lead evaluation in blood of workers of batteries industries; Evaluacion de plomo en sangre de trabajadores de industrias de baterias

Energy Technology Data Exchange (ETDEWEB)

Valbuena P, John J; Duarte, Martha; Clara, Marciales

2001-07-01

In order to evaluate the occupational risk of exposure to lead of employees working in three small industries that recycle and manufacture acid lead batteries, the lead and zinc protoporphyrine (ZPP) blood content was determined. The determination was also performed on people not exposed in order to establish comparison values. Venous blood was collected in metal free heparinized glass tubes. Lead was analyzed by atomic absorption with graphite furnace and ZPP by fluorescence. According to Colombian legislation, it was found that around 31 % workers in this type of industries are in dangerous and intoxication exposure. It was also found that 91 % of workers exceed the level of 30 mg Pb/dL blood established as standard by the American Conference governmental Industrial Hygienists (ACGIH)

Food industry workers' attitudes on the importance of factors affecting foodstuff quality managament

Directory of Open Access Journals (Sweden)

Antić Zorana

2015-01-01

Full Text Available The food industry is faced with several challenges at the same time: to supply safe and affordable foodstuff in sufficient quantity; to provide products in conditions where demand surpasses the human population growth; to operate in circumstances of ever-increasing competition; to protect the environment and respond to the population's public health concerns. An organization's success depends on the knowledge, skills, creativity and motivation of the company's workers and partners. Focus on its employees enables a company's development and improvement, whereas business ethics ensures public health and safety protection, environmental protection and life quality improvement. The company management's responsibility lies foremost in education, worker training and development, thus enabling a direct and indirect influence on the foodstuff quality and satisfying consumer requests in terms of foodstuff quality characteristics.

Pengaruh konsentrasi pigmen indigo pada pewarnaan (dyeing dan pengulangan warna (topping pada kulit bludru

Directory of Open Access Journals (Sweden)

Emiliana Kasmudjiastuti

2007-06-01

Full Text Available Paste indigo pigment having blue colour was produced from fermentation of indigofera tinctoria leaves and twigs. Having was very popular dye and was used especially in textile industries and leather industries of fur. The aim of the study was to the optimum concentration of indigo pigmen on dyeing of suede leather. The materials used in study were crust suede leather, indigo pigmen, wetting agent, soda ash, ammonia, formic acid sulfonated oil, and redactors such as palm sugar. The dying of leather using indigo pigmen was principally similar with common dyeing and pH of indigo is 11.5, however pH on several steps must adjusted. Variation of the concentration of in dyeing was 0.5, 1, and 1.5% respectively. Performance test were of conducted for dye penetration, colour rub fastness (dry, wet, sweat resistant, and sun light resistant for 6, 13, and 20 hours respectively. The results showed that the optimum concentration of pigmen indigo was 9% dyeing and 1 % for topping with level dye, indicated appropriate penetration dye into the cross-section leather, no fading was performed by dry colour fastness test (score 4/5 and wet colour fastness test (score 4, good sweat resistant (score 5, no colour fading on the exposure to sun light for 20 hours (score 4.

Utilization of hair and nails as bio-indicators of contamination by heavy and toxic metals in industrial workers

International Nuclear Information System (INIS)

Vilhena Schayer Sabino, Claudia de; Silva, Ascanio Barros F.E.; Fernandes, Marcio Prado; Amaral, Angela Maria; Franco, Milton Batista; Guedes, Joao Bosco; Francisco, Dovenir; Castro de Assis, Adilson de.

1996-01-01

Instrumental neutron activation analysis and atomic absorption spectrometry were performed on scalp hair and fingernail samples collected from a group of heavily exposed healthy mail industrial workers. The concentration of trace elements (As, Cd, Cr, Hg, Ni, Pb and Sb) were evaluated and compared for scalp and fingernails. Comparative studies demonstrated that concentration of certain elements were greater than those corresponding to non-exposed workers. (author). 4 refs., 6 tabs

A primary liver cancer death's survey and risk factors analysis of the workers in China nuclear industry

International Nuclear Information System (INIS)

Bao Shouchen; Chang Xuezhang; Gao Zenglin; Xiong Jinlian; Zhang Xuzong; Zhang Zhongren

1999-07-01

To evaluate primary liver cancer death in the workers of China nuclear industry and to discuss the risk factors probably for making protection and cure measures, the workers of 11 units are surveyed from the time of foundation to the end of 1990 by groups, trades and sex, and the results are analyzed with the relevant physical examinations, the results in laboratory test, and some clinic epidemiological data concerned. The accumulative rough mortality is 19.20 x 10 -5 , standard mortality 10.09 x 10 -5 , the most is at the age of 35 to 54. SMR 1.00 (P > 0.05), RR value in uranium mines is 3.67 (P < 0.01) and others does not increase. The incidence of hepatomegalia and GPT rising are lower than or about 10%, while the incidence of HBsAg is lower than 8%, a middle-levelled infection in the country. And HBsAg incidence in liver cancer cases is 61.6% and chronic hepatitis in liver cancer cases is 53.4%. The liver cancer case increase in the workers in nuclear industry is not found, but significant increase is found in uranium mine workers; whereas there is no evidence that can be attributed to radiation operation, and the death risk may be considered mainly to be related to HBV infection, then chronic hepatitis or environment factors

Study of radon, thoron and toxic elements in some textile dyes

International Nuclear Information System (INIS)

Abel-Ghany, H.A.

2013-01-01

Elemental analysis of textile dyes may provide valuable information concerning the content and concentrations of element, especially the toxic ones. Such information monitors the safety of handling and using these dyes in textile industry. In addition to the safety of wearing of clothes stained with these dyes. In the present work, the specific activity of both radon and thoron were measured in nine textile dyes by using alpha emitters registration which are emitted from radon and thoron gases in CR-39 nuclear track detectors. Unexpectedly, the results obtained reports a high concentration of both radon and thoron gases in some samples (samples D5 and D9). Also the concentration of toxic elements (Cu, Pb, Zn, Mn, Cd and Cr) in textile dyes were determined by flame and graphite furnace atomic absorption spectrometry. (author)

[Shoes stitched, workers unstitched: a study on working and health conditions among women factory workers in the footwear industry in Franca, São Paulo State, Brazil].

Science.gov (United States)

Prazeres, Taísa Junqueira; Navarro, Vera Lucia

2011-10-01

This study aimed to analyze associations between working conditions and health problems reported by women workers assigned to mechanical stitching in the footwear industry in Franca, São Paulo State, Brazil. The qualitative study's theory and methodology were based on historical and dialectical materialism and combined sociological and ethnographic research techniques. Data were collected with taped interviews, focusing on the workers' life and work stories, systematic observation of the work process, consultation of historical documents, and imagistic production. Analysis of the data revealed the effects of work in mechanical stitching on the health of women workers employed in the factory and at home, who experience precarious labor conditions involving workday intensification and extension, preset production targets, job insecurity, and unhealthy workplaces.

Electron Beam Treatment Plant for Textile Dyeing Wastewater

International Nuclear Information System (INIS)

Han, Bumsoo; Kim, Yuri; Choi, Jangseung; Ahn, Sangjun

2006-01-01

High positive effect of electron-beam treatment involved into the process of wastewater purification is now well established. The most effective for the purpose seem to be combine methods including both electron beam and any conventional treatment stages, i.e., under conditions when some synergistic effects can take place. Daegu Dyeing Industrial Complex (DDIC) includes about hundred factories occupying the area of 600,000m 2 with 13,000 employees in total. The production requires high consumption of water (90,000m 3 /day), steam, and electric power, being characterized by large amount of highly colored industrial wastewater. Because of increase in productivity and increased assortment of dyes and other chemicals, substantial necessity appears in re-equipment of purification facilities by application of efficient methods of wastewater treatment

Usage of FTIR-ATR as Non-Destructive Analysis of Selected Toxic Dyes

Directory of Open Access Journals (Sweden)

Bartošová Alica

2017-06-01

Full Text Available The degradation of the environment which is due to the discharge of polluting wastewater from industrial sources poses a real problem in several countries. Textile industries use large volumes of water in their operations, discharging thus large volume of wastewater into the environment, most of which is untreated. The wastewater contains a variety of chemicals from various stages of process operations, including desizing, scouring, bleaching and dyeing. The main purpose of this paper is to introduce Infrared Spectrometry with Fourier transformation as a non-destructive method for study, identifation and rapid determination of selected representatives of cationic (Methylene Blue, azo (Congo Red, Eriochrome Black T and nitroso (Naphthol Green B dyes. In conjunction with the ATR technique, FTIR offers a reliable detection method of dyes without extraction by other dangerous substances.

Worker exposure to silica dust in South African non-mining industries in Gauteng: An exploratory study

CSIR Research Space (South Africa)

Khoza, NN

2012-06-01

Full Text Available %, and sandblasting 2.4%. The overall maximum and minimum exposures were 5.772 and 0.009 mg/m?, respectively. Conclusion: Workers are potentially at high risk of contracting silicosis and other diseases associated with respirable silica dust. Dust control... and monitoring were inadequate in the industries visited. It is recommended that an in-depth study be conducted and that airborne dust-control programmes be implemented. Key words: non-mining industries, silica dust, respirable crystalline silica dust...

Applying Machine Learning to Workers' Compensation Data to Identify Industry-Specific Ergonomic and Safety Prevention Priorities: Ohio, 2001 to 2011.

Science.gov (United States)

Meyers, Alysha R; Al-Tarawneh, Ibraheem S; Wurzelbacher, Steven J; Bushnell, P Timothy; Lampl, Michael P; Bell, Jennifer L; Bertke, Stephen J; Robins, David C; Tseng, Chih-Yu; Wei, Chia; Raudabaugh, Jill A; Schnorr, Teresa M

2018-01-01

This study leveraged a state workers' compensation claims database and machine learning techniques to target prevention efforts by injury causation and industry. Injury causation auto-coding methods were developed to code more than 1.2 million Ohio Bureau of Workers' Compensation claims for this study. Industry groups were ranked for soft-tissue musculoskeletal claims that may have been preventable with biomechanical ergonomic (ERGO) or slip/trip/fall (STF) interventions. On the basis of the average of claim count and rate ranks for more than 200 industry groups, Skilled Nursing Facilities (ERGO) and General Freight Trucking (STF) were the highest risk for lost-time claims (>7 days). This study created a third, major causation-specific U.S. occupational injury surveillance system. These findings are being used to focus prevention resources on specific occupational injury types in specific industry groups, especially in Ohio. Other state bureaus or insurers may use similar methods.

3D-QSPR Method of Computational Technique Applied on Red Reactive Dyes by Using CoMFA Strategy

OpenAIRE

Mahmood, Uzma; Rashid, Sitara; Ali, S. Ishrat; Parveen, Rasheeda; ul-Haq, Zaheer; Ambreen, Nida; Khan, Khalid Mohammed; Perveen, Shahnaz; Voelter, Wolfgang

2011-01-01

Cellulose fiber is a tremendous natural resource that has broad application in various productions including the textile industry. The dyes, which are commonly used for cellulose printing, are ?reactive dyes? because of their high wet fastness and brilliant colors. The interaction of various dyes with the cellulose fiber depends upon the physiochemical properties that are governed by specific features of the dye molecule. The binding pattern of the reactive dye with cellulose fiber is called ...

Plant waste materials from restaurants as the adsorbents for dyes

Directory of Open Access Journals (Sweden)

Pavlović Marija D.

2015-01-01

Full Text Available This paper has demonstrated the valorization of inexpensive and readily available restaurant waste containing most consumed food and beverage residues as adsorbents for methylene blue dye. Coffee, tea, lettuce and citrus waste have been utilized without any pre-treatment, thus the adsorption capacities and dye removal efficiency were determined. Coffee waste showed highest adsorbent capacity, followed by tea, lettuce and citrus waste. The dye removal was more effective as dye concentration increases from 5 up to 60 mg/L. The favorable results obtained for lettuce waste have been especially encouraged, as this material has not been commonly employed for sorption purposes. Equilibrium data fitted very well in a Freundlich isotherm model, whereas pseudo-second-order kinetic model describes the process behavior. Restaurant waste performed rapid dye removal at no cost, so it can be adopted and widely used in industries for contaminated water treatment.

Kinetic modelling and mechanism of dye adsorption on unburned carbon

Energy Technology Data Exchange (ETDEWEB)

Wang, S.B.; Li, H.T. [Curtin University of Technology, Perth, WA (Australia). Dept. of Chemical Engineering

2007-07-01

Textile dyeing processes are among the most environmentally unfriendly industrial processes by producing coloured wastewaters. The adsorption method using unburned carbon from coal combustion residue was studied for the decolourisation of typical acidic and basic dyes. It was discovered that the unburned carbon showed high adsorption capacity at 1.97 x 10{sup -4} and 5.27 x 10{sup -4} mol/g for Basic Violet 3 and Acid Black 1, respectively. The solution pH, particle size and temperature significantly influenced the adsorption capacity. Higher solution pH favoured the adsorption of basic dye while reduced the adsorption of acid dye. The adsorption of dye increased with increasing temperature but decreased with increasing particle size. Sorption kinetic data indicated that the adsorption kinetics followed the pseudo-second-order model. The adsorption mechanism consisted of two processes, external diffusion and intraparticle diffusion, and the external diffusion was the dominating process.

Bio-degradation of synthetic textile dyes by thermophilic lignolytic fungal isolates

Directory of Open Access Journals (Sweden)

Nidhi Sahni

2014-10-01

Full Text Available Synthetic dyes are extensively used in different industries like textile dyeing, paper, printing, color, photography, pharmaceutics and cosmetics. These are generally toxic and carcinogenic in nature. If not treated, they will remain in nature for a long period of time as they are recalcitrant. Among these, azo dyes represent the largest and most versatile class of synthetic dyes. Approximately 10-15% of the dyes are released into the environment during manufacture and usage. Various methods are used for dye removal viz. physical, chemical, electrochemical and biological. Advantage of chemical, electrochemical and biological methods over physical involves the complete destruction of the dye, but chemical and electrochemical methods are found to be expensive and have operational problems. So the biological method is preferred over other methods for degradation/decolorization of dyes. In the present study, thermophilic lignolytic fungal culture was isolated from compost/soil/digested slurry/plant debris, were subjected for acclimatization to Remazol Brilliant Blue (RBB at 0.05% concentration, in the malt extract broth (MEB. The most promising fungal isolates were used for further dye degradation studies. The results suggest that the isolates T10, T14 and T17 as a useful tool for degradation of reactive dyes.

Electrocoagulation-Adsorption to Remove Anionic and Cationic Dyes from Aqueous Solution by PV-Energy

OpenAIRE

Castañeda-Díaz, J.; Pavón-Silva, T.; Gutiérrez-Segura, E.; Colín-Cruz, A.

2017-01-01

The cationic dye malachite green (MG) and the anionic dye Remazol yellow (RY) were removed from aqueous solutions using electrocoagulation-adsorption processes. Batch and continuous electrocoagulation procedures were performed and compared. Carbonaceous materials obtained from industrial sewage sludge and commercial activated carbons were used to adsorb dyes from aqueous solutions in column systems with a 96–98% removal efficiency. The continuous electrocoagulation-adsorption system was more ...

Bioflocculation of Basic Dye onto Isolated Microbial Biopolymers

Directory of Open Access Journals (Sweden)

M. Elkady

2017-10-01

Full Text Available Three purified biopolymers isolated from Bacillus velezensis (40B, Bacillus mojavensis (32A and Pseudomonas (38A strains were evaluated for dye decolourization as bioflocculants. The decolourization capacity of the three polymers was inspected using C.I 28 basic yellow dye as hazardous pollutant. The chemical compositions of these purified biopolymers were considered by HPLC and FTIR spectrum. The decolourization efficiency of the three purified biopolymers was determined using both real dye polluted wastewater (discharged from AKSA EGYPT acrylic fibres industry and simulated synthetic wastewater. The maximum decolourization efficiencies of the purified biopolymers of the three studied strains (40B, (32A and (38A were 91, 89 and 88 %, respectively. The equilibrium of dye sorption process onto biopolymers was described using Langmuir isotherm equation. However, its kinetics follows the pseudo second order model. The thermodynamic examination investigated the exothermic and spontaneous nature of the decolourization process using the purified biopolymers.

Persistence of livestock-associated antibiotic-resistant Staphylococcus aureus among industrial hog operation workers in North Carolina over 14 days.

Science.gov (United States)

Nadimpalli, Maya; Rinsky, Jessica L; Wing, Steve; Hall, Devon; Stewart, Jill; Larsen, Jesper; Nachman, Keeve E; Love, Dave C; Pierce, Elizabeth; Pisanic, Nora; Strelitz, Jean; Harduar-Morano, Laurel; Heaney, Christopher D

2015-02-01

This study aimed to evaluate the persistence of nasal carriage of Staphylococcus aureus, methicillin-resistant S. aureus and multidrug-resistant S. aureus over 14 days of follow-up among industrial hog operation workers in North Carolina. Workers anticipating at least 24 h away from work were enrolled June-August 2012. Participants self-collected a nasal swab and completed a study journal on the evening of day 1, and each morning and evening on days 2-7 and 14 of the study. S. aureus isolated from nasal swabs were assessed for antibiotic susceptibility, spa type and absence of the scn gene. Livestock association was defined by absence of scn. Twenty-two workers provided 327 samples. S. aureus carriage end points did not change with time away from work (mean 49 h; range >0-96 h). Ten workers were persistent and six were intermittent carriers of livestock-associated S. aureus. Six workers were persistent and three intermittent carriers of livestock-associated multidrug-resistant S. aureus. One worker persistently carried livestock-associated methicillin-resistant S. aureus. Six workers were non-carriers of livestock-associated S. aureus. Eighty-two per cent of livestock-associated S. aureus demonstrated resistance to tetracycline. A majority of livestock-associated S. aureus isolates (n=169) were CC398 (68%) while 31% were CC9. No CC398 and one CC9 isolate was detected among scn-positive isolates. Nasal carriage of livestock-associated S. aureus, multidrug-resistant S. aureus and methicillin-resistant S. aureus can persist among industrial hog operation workers over a 14-day period, which included up to 96 h away from work. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Dyeing of Polyester with Disperse Dyes: Part 2. Synthesis and Dyeing Characteristics of Some Azo Disperse Dyes for Polyester Fabrics

Directory of Open Access Journals (Sweden)

Alya M. Al-Etaibi

2016-06-01

Full Text Available The goal of this study was to utilize carrier for accelerating the rate of dyeing not only to enhance dyeing of polyester fabrics dyed with disperse dyes 3a,b, but also to save energy. Both the color strength expressed as dye uptake and the fastness properties of the dyed fabrics were evaluated.

Electrical fatalities among U.S. construction workers.

Science.gov (United States)

Ore, T; Casini, V

1996-06-01

Over 2000 electrocution deaths were identified among U.S. construction workers from 1980 to 1991, with the highest mean annual crude mortality rate (2.5 per 100,000 people), and second highest mean age-adjusted rate (2.7 per 100,000 people) of all industries. Although the crude fatality rates showed a downward trend, construction workers are still about four times more likely to be electrocuted at work than are workers in all industries combined. Nearly 40% of the 5083 fatal electrocutions in all industries combined occurred in construction, and 80% were associated with industrial wiring, appliances, and transmission lines. Electrocutions ranked as the second leading cause of death among construction workers, accounting for an average of 15% of traumatic deaths in the industry from 1980 to 1991. The study indicates that the workers most at risk of electrical injury are male, young, nonwhite, and electricians, structural metal workers, and laborers. The most likely time of injury is 11 a.m. to 3 p.m. from June to August. Focusing prevention on these populations and characteristics through better methods of worker and supervisor electrical safety training, use of adequate protective clothing, and compliance with established procedures could minimize the average annual loss of 168 U.S. construction workers.

Costs by industry and diagnosis among musculoskeletal claims in a state workers compensation system: 1999-2004.

Science.gov (United States)

Dunning, Kari K; Davis, Kermit G; Cook, Chad; Kotowski, Susan E; Hamrick, Chris; Jewell, Gregory; Lockey, James

2010-03-01

Musculoskeletal disorders (MSDs) are a tremendous burden on industry in the United States. However, there is limited understanding of the unique issues relating to specific industry sectors, specifically the frequency and costs of different MSDs. Claim data from 1999 to 2004 from the Ohio Bureau of Workers' Compensation were analyzed as a function of industry sector (NAICS industry-sector categories) and anatomical region (ICD-9 codes). Almost 50% of the claims were lumbar spine (26.9%) or hand/wrist (21.7%). The majority of claims were from manufacturing (25.1%) and service (32.8%) industries. The industries with the highest average costs per claim were transportation, warehouse, and utilities and construction. Across industries, the highest costs per claim were consistently for the lumbar spine, shoulder, and cervical spine body regions. This study provides insight into the severity (i.e., medical and indemnity costs) of MSDs across multiple industries, providing data for prioritizing of resources for research and interventions. 2009 Wiley-Liss, Inc.

Photodegradation of Acid red 18 dye by BiOI/ZnO nanocomposite: A dataset

Directory of Open Access Journals (Sweden)

Sahand Jorfi

2018-02-01

Full Text Available Dyes are one of the most important existing pollutants in textile industrial wastewater. These compounds are often toxic, carcinogenic, and mutagenic to living organisms, chemically and photochemically stable, and non-biodegradable. Acid red 18 is one of the azo dyes that are currently used in the textile industries. Photocatalytic degradation offers a great potential as an advanced oxidation process, in this study photocatalytic degradation of Acid red 18 by using BiOI/ZnO nanocomposite was evaluated under visible light irradiation. The influence of most essential parameters such as pH and BiOI/ZnO dosage were studied for optimum conditions. The dye removal efficiency was 85.1% at optimum experimental conditions of pH of 7, and BiOI/ZnO dosage of 1.5 g/L. The data had a good agreement with pseudo first-order kinetic model. Thus, the BiOI/ZnO/UV is an efficient process for dye degradation. Keywords: Photodegradation, Nanocomposite, BiOI/ZnO, Degradation, Dye, Acid red 18

Nano-dyeing

Directory of Open Access Journals (Sweden)

Ning Cui-Juan

2016-01-01

Full Text Available Dyeing nanofibers is a frontier of both modern textile engineering and nanotechnology. This paper suggest a feasible method for dyeing nanofibers with a natural red (Roselle Calyx by bubble electrospinning. Reactive dye (Red S3B and acid dye (Red 2B were also used in the experiment for comparison. The dyeing process was finished during the spinning process.

Socioeconomic mobility and tobacco consumption patterns in fish industry workers in Udupi District of coastal Karnataka.

Science.gov (United States)

Acharya, Shashidhar; Pentapati, Kalyana Chakravarthy; Acharya, Shruthi

2014-01-01

The aim of this study was to understand the tobacco consumption patterns and their relationship with life course socioeconomic mobility among fish industry workers as this could provide important information in dealing with the tobacco problem in this very vulnerable population. Socioeconomic life course data and information about tobacco habits was collected from 102 fish industry workers. A subject was considered to be upwardly mobile if the family head's educational attainment and the number of earning members increased and the number of children and dependents decreased since childhood in his or her household. Oral examination was also done for malignant/premalignant lesions. Of the 102 subjects, 64 regularly consumed tobacco either in smoking or smokeless forms and the common reasons for the habit were the co-workers' influence and to keep awake at work. Fourteen subjects had premalignant lesions in the oral cavity and all them were in the buccal mucosa. The prevalence of the tobacco habit was much lesser (25%) among the upwardly mobile group when compared to the minimal or no improvement group (75%). A majority of those free from the habit (73.7%) were belonging to the group, which showed improved educational attainment. Among those with good social mobility, the percentage of workers with high frequency of tobacco consumption and those with a longer duration of the tobacco habit was low when compared to the minimal social mobility group. A holistic approach consisting of efforts to improve the overall socioeconomic conditions can be more effective than piecemeal solutions in dealing with the tobacco menace.

Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

OpenAIRE

Syed Farman Ali Shah; Aziza Aftab; Noorullah Soomro; Mir Shah Nawaz; Kambiz Vafai

2015-01-01

The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO), granulated activated carbon (GAC) bed, etc. The treatment efficiency was improved by coupling c...

Workers radiation protection. Solutions accommodate new needs. The tool box of radiation protection expands itself. Industrial radiology: workers aware of risks. To design a shielded enclosure

International Nuclear Information System (INIS)

Rannou, Alain; Billarand, Yann; Scanff, Pascale; Etard, Cecile; Sage, Julie; Jolivet, Patrick; Israel, Sylvain; Caplin, Helene; Couasnon, Olivier; Cordelle, Anne

2017-01-01

A first article proposes an overview of developments in the field of workers radiation protection. This development is notably motivated by the future dismantling works. It can be noticed that some other issues are considered as more important than radiation protection in the medical field even though radiation protection is a matter of concern for radiology manipulators. Radiation protection is also an issue for workers performing luggage X-ray controls in airports. As revealed by some measurements, artificial radioactivity should be controlled. Radiation protection is planned in relationship with an exposure scenario. The Belgium example is evoked with the development of centralised data and statistics in order to compare workers profiles. A second article comments the evolution of the activity of radiation protection with its new documents, methodologies (notably for operating rooms), and practical studies. While indicating how much the number of specialised workers increased, and how much dose control has been developed in the medical sector, and in terms of workers wearing a ring- or wrist-dosimeter between 2006 and 2015, and also indicating the distribution of controlled workers among sectors, the article outlines that a computation tool is shared between professionals, and how sheets on radionuclides are published and shared. The third article briefly addresses industrial radiology to outlines that workers are always more aware of risks. The last article briefly describes how a shielded enclosure is designed to limit workers exposure

Persistence of livestock-associated antibiotic-resistant Staphylococcus aureus among industrial hog operation workers in North Carolina over 14 days

Science.gov (United States)

Nadimpalli, Maya; Rinsky, Jessica L; Wing, Steve; Hall, Devon; Stewart, Jill; Larsen, Jesper; Nachman, Keeve E; Love, Dave C; Pierce, Elizabeth; Pisanic, Nora; Strelitz, Jean; Harduar-Morano, Laurel; Heaney, Christopher D

2015-01-01

Objectives This study aimed to evaluate the persistence of nasal carriage of Staphylococcus aureus, methicillin-resistant S. aureus and multidrug-resistant S. aureus over 14 days of follow-up among industrial hog operation workers in North Carolina. Methods Workers anticipating at least 24 h away from work were enrolled June–August 2012. Participants self-collected a nasal swab and completed a study journal on the evening of day 1, and each morning and evening on days 2–7 and 14 of the study. S. aureus isolated from nasal swabs were assessed for antibiotic susceptibility, spa type and absence of the scn gene. Livestock association was defined by absence of scn. Results Twenty-two workers provided 327 samples. S. aureus carriage end points did not change with time away from work (mean 49 h; range >0–96 h). Ten workers were persistent and six were intermittent carriers of livestock-associated S. aureus. Six workers were persistent and three intermittent carriers of livestock-associated multidrug-resistant S. aureus. One worker persistently carried livestock-associated methicillin-resistant S. aureus. Six workers were non-carriers of livestock-associated S. aureus. Eighty-two per cent of livestock-associated S. aureus demonstrated resistance to tetracycline. A majority of livestock-associated S. aureus isolates (n=169) were CC398 (68%) while 31% were CC9. No CC398 and one CC9 isolate was detected among scn-positive isolates. Conclusions Nasal carriage of livestock-associated S. aureus, multidrug-resistant S. aureus and methicillin-resistant S. aureus can persist among industrial hog operation workers over a 14-day period, which included up to 96 h away from work. PMID:25200855

Photoelectrochemical studies of dye-sensitized solar cells using organic dyes

Energy Technology Data Exchange (ETDEWEB)

Marinado, Tannia

2009-10-15

The dye-sensitized solar cell (DSC) is a promising efficient low-cost molecular photovoltaic device. One of the key components in DSCs is the dye, as it is responsible for the capture of sunlight. State-of-the-art DSC devices, based on ruthenium dyes, show record efficiencies of 10-12 %. During the last decade, metal-free organic dyes have been extensively explored as sensitizers for DSC application. The use of organic dyes is particularly attractive as it enables easy structural modifications, due to fairly short synthetic routes and reduced material cost. Novel dye should in addition to the light-harvesting properties also be compatible with the DSC components. In this thesis, a series of new organic dyes are investigated, both when integrated in the DSC device and as individual components. The evaluation methods consisted of different electrochemical and photoelectrochemical techniques. Whereas the light-harvesting properties of the dyes were fairly easily improved, the behavior of the dye integrated in the DSC showed less predictable photovoltaic results. The dye series studied in Papers II and IV revealed that their dye energetics limited vital electron-transfer processes, the dye regeneration (Paper II) and injection quantum yield (Paper IV). Further, in Papers III-VI, it was observed that different dye structures seemed to alter the interfacial electron recombination with the electrolyte. In addition to the dye structure sterics, some organic dyes appear to enhance the interfacial recombination, possibly due to specific dye-redox acceptor interaction (Paper V). The impact of dye sterical modifications versus the use of coadsorbent was explored in Paper VI. The dye layer properties in the presence and absence of various coadsorbents were further investigated in Paper VII. The core of this thesis is the identification of the processes and properties limiting the performance of the DSC device, aiming at an overall understanding of the compatibility between the

Process evaluation and treatability study of wastewater in a textile dyeing industry

Energy Technology Data Exchange (ETDEWEB)

Mazumder, Debabrata [Civil Engineering Department, Bengal Engineering and Science University, Shibpur, P.O. - Botanic Garden, Horah, West Bengal - 711 103 (India)

2011-07-01

The process was investigated in a textile dying unit and subsequently wastewater generation profile was studied for the development of a viable treatment. The dyeing unit under the study generated a considerable volume of wastewater containing inorganic chemicals and organic reactive green dye. Chemical oxygen demand (COD) resulting from all the chemically oxidizible substances and the residual color of the dye were targeted for removal. The wastewater samples were collected from different sub-processes and then characterized for the parameters viz. pH, Total solid, Suspended solid, Dissolved solid, COD and Alkalinity. A composite wastewater sample was prepared according to the measured wastewater discharge from various unit operations and used for treatability study. In the first stage, coagulation-flocculation with alum and chemical oxidation with bleaching powder were performed separately. Subsequently, adsorption study was conducted with crushed burnt coal (C.B.C.) on the composite wastewater, initially treated with 10% bleaching powder solution. After several trials, this combination was found to be effective for a C.B.C. content of 10% under a contact period of 90 minutes, which showed 100% colour and about 95% COD removal.

Measuring of nonlinearity of dye doped liquid crystals using of self phase modulation effect

International Nuclear Information System (INIS)

Abedi, M.; Jafari, A.; Tajalli, H.

2007-01-01

Self phase modulation in dye doped liquid crystals has investigated and the nonlinearity of dye doped liquid crystals is measured by this effect. The Self phase modulation effect can be used for producing optical micro rings that have many applications in photonics and laser industries.

Industrial wastewater treatment with electron beam

Energy Technology Data Exchange (ETDEWEB)

Han, Bumsoo; Ko, Jaein; Kim, Jinkyu; Kim, Yuri; Chung, Wooho [Central Research Institute of Samsung Heavy Industries Co., Taejon (Korea)

2001-03-01

Global withdrawals of water to satisfy human demands have grown dramatically in this century. Between 1900 and 1945, water consumption increased by over six times, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industrial uses, and the increasing use per capita for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water-efficient technologies including economical treatment methods of wastewater and polluted water. In the Central Research Institute of Samsung Heavy Industries (SHI), many industrial wastewater including leachate from landfill area, wastewater from papermill, dyeing complex, petrochemical processes, etc. are under investigation with electron beam irradiation. For the study of treating dyeing wastewater combined with conventional facilities, an electron beam pilot plant for treating 1,000m{sup 3}/day of wastewater from 80,000m{sup 3}/day of total dyeing wastewater has constructed and operated in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from Papermill Company is also designed for S-paper Co. in Cheongwon City, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process. (author)

Industrial wastewater treatment with electron beam

International Nuclear Information System (INIS)

Han, Bumsoo; Ko, Jaein; Kim, Jinkyu; Kim, Yuri; Chung, Wooho

2001-01-01

Global withdrawals of water to satisfy human demands have grown dramatically in this century. Between 1900 and 1945, water consumption increased by over six times, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industrial uses, and the increasing use per capita for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water-efficient technologies including economical treatment methods of wastewater and polluted water. In the Central Research Institute of Samsung Heavy Industries (SHI), many industrial wastewater including leachate from landfill area, wastewater from papermill, dyeing complex, petrochemical processes, etc. are under investigation with electron beam irradiation. For the study of treating dyeing wastewater combined with conventional facilities, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 80,000m 3 /day of total dyeing wastewater has constructed and operated in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from Papermill Company is also designed for S-paper Co. in Cheongwon City, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process. (author)

Synthesis of silver nanoparticles using bacterial exopolysaccharide and its application for degradation of azo-dyes

Directory of Open Access Journals (Sweden)

Chinnashanmugam Saravanan

2017-09-01

Full Text Available In this study, the synthesis and characterization of exopolysaccharide-stabilized sliver nanoparticles (AgNPs was carried out for the degradation of industrial textile dyes. Characterization of AgNPs was done using surface plasmon spectra using UV–Vis spectroscopy, X-ray diffraction (XRD and Raman spectroscopy. The morphological nature of AgNPs was determined through transmission electron microscopy (TEM, scanning electron microscopy (SEM and atomic force microscopy (AFM, which indicated that the AgNPs were spherical in shape, with an average size of 35 nm. The thermal behaviour of AgNPs revealed that it is stable up to 437.1 °C and the required energy is 808.2J/g in TGA-DTA analysis. Ability of EPS stabilized AgNPs for degradation of azo dyes such as Methyl orange (MO and Congo red (CR showed that EPS stabilized AgNPs were found to be efficient in facilitating the degradation process of industrial textile dyes. The electron transfer takes place from reducing agent to dye molecule via nanoparticles, resulting in the destruction of the dye chromophore structure. This makes EPS-AgNPs a suitable, cheap and environment friendly candidate for biodegradation of harmful textile dyes.

Carbon/Attapulgite Composites as Recycled Palm Oil-Decoloring and Dye Adsorbents

Directory of Open Access Journals (Sweden)

Guangyan Tian

2018-01-01

Full Text Available Activated clay minerals have been widely used in the edible oil refining industry for decolorization of crude oil by adsorption, and so far many methods have been used to improve their decolorization efficiency. Herein, we successfully prepared a series of carbon/attapulgite (C/APT composite adsorbents by a one-step in-situ carbonization process with natural starch (St as the carbon source. It has been revealed that the adsorbent had better decolorization efficiency for crude palm oil than acid-activated APT. However, more than a million tons of decolorized waste is produced every year in the oil-refining industry, which was often treated as solid waste and has not yet been reutilized effectively. In order to explore a viable method to recycle and reuse the decolorant, the waste decolorant was further prepared into new C/APT adsorbents for the removal of dyes from wastewater, and then the dyes adsorbed on the adsorbent were used as the carbon sources to produce new C/APT adsorbents by a cyclic carbonization process. The results showed that the adsorbents prepared from the decolorized waste could remove more than 99.5% of the methylene blue (MB, methyl violet (MV, and malachite green (MG dyes from the simulated wastewater with the dye concentration of 200 mg/L, and the C/APT–Re adsorbent consecutively regenerated five times using the adsorbed dyes as a carbon source still exhibit good adsorption efficiency for dyes. As a whole, this process opens a new avenue to develop efficient decolorants of palm oil and achieves recyclable utilization of decolored waste.

[Prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in workers of the upholstered furniture industry].

Science.gov (United States)

Nicoletti, S; Carino, M; Di Leone, G; Trani, G; Carella, F; Rubino, G; Leone, E; Popolizio, R; Colafiglio, S; Ambrosi, L

2008-01-01

The upholstered furniture industry, the so-called "triangle of the sofa industry", is a geographic area of national and strategic economic importance in southern Italy. The single tasks are carried out mostly manually, with the characteristics of a handicraft approach. The aim of the survey was to assess the prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in 30 factories of the sofa industry located in a large geographic area of the Puglia and Basilicata Regions. In the period 1 January-31 December 2003 a network of occupational physicians investigated a population of 5.477 subjects (exposed n=3481, controls n=1996, M=3865, F=1612) in 30 different factories of the area. More than 60 percent of the total workforce studied was employed in large-sized companies (>500 employees). The following work tasks were considered: filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Case-definition was assessed through standardized procedures: symptoms by questionnaire plus physical and laboratory/imaging findings. Cumulative prevalence rates of UL-WMSDs as at 31 December 2003 reached values of up to 30% in high risk groups. Prevalence rates showed good correlation with the concise OCRA index used for assessment of exposure to repetitive strain and movements of the upper limb. The most frequently occurring disorders were tendon-related cysts and wrist tendonitis. Shoulder disorders were more frequent in male and female leather-cutting operators. This survey showed a significantly high prevalence of UL-WMSDs in sofa industry workers. It did not seem to be confirmed in this study that there was a greater female susceptibility to UL-WMSDs with the exception of carpal tunnel syndrome: gender difference seems to be less relevant at increasing levels of occupational exposure to repetitive movements and exertion of the upper limbs.

Effects of extremely low frequency electromagnetic field on the health of workers in automotive industry.

Science.gov (United States)

Liu, Xin; Zhao, Longyu; Yu, Duo; Ma, Shumei; Liu, Xiaodong

2013-12-01

To observe the effects of extremely low frequency electromagnetic fields (ELF-EMFs) in automotive industry on occupational workers. A total of 704 workers were investigated, and 374 workers were chosen and divided into two groups (control group and exposure group) according to the inclusive criteria, namely male with age 20-40 years old and ≥ 2 years of exposure. The intensities of ELF-EMFs and noise were detected with EFA-300 Field Analyzer (Narda company, Pfullingen, Germany) and AWA5610D integrating sound level meter (Hangzhou Aihua Instruments Co., Ltd, Hangzhou, China), respectively. Survey data were collected by questionnaire, and the physical check-up was done in hospital. All the data were input into SPSS17.0 software (SPSS Inc, Chicago, USA), and the appropriate statistic analyses were carried out. The intensity of EMFs in exposure group was significantly higher than that in control group (p 0.05). The survey data collected by questionnaires showed that the symptoms of loss of hair in exposure group were significantly different as compared with that in control group (p effects on the nervous, cardiovascular, liver, and hematology system of workers.

Removal of hazardous dye Ponceau-S by using Chitin:

African Journals Online (AJOL)

Sr030111Bin Comp

Key words: Chitin, Ponceau-S, organic bioadsorbent, colored organic, industrial effluents. ..... of cationic azo dye by TiO2/bentonite nanocomposite, J. Photochem. ... effluents to freshwater and estuarine algae, crustaceans and fishes. Environ.

Effective decolorization and adsorption of contaminant from industrial dye effluents using spherical surfaced magnetic (Fe_3O_4) nanoparticles

International Nuclear Information System (INIS)

Suriyaprabha, R.; Khan, Samreen Heena; Pathak, Bhawana; Fulekar, M. H.

2016-01-01

Treatment of highly concentrated Industrial dye stuff effluents released in the environment is the major issue faced in the era of waste management as well as in water pollution. Though there is availability of conventional techniques in large numbers, there is a need of efficient and effective advance technologies. In account of that, Nanotechnology plays a prominent role to treat the heavy metals, organic and inorganic contaminants using smart materials in nano regime (1 -100 nm). Among these nanomaterials like Iron Oxide (Fe_3O_4, magnetic nanoparticle) is one of the most promising candidates to remove the heavy metals from the industrial effluent. Fe_3O_4 is the widely used smart material with magnetic property having high surface area; high surface to volume ratio provides more surface for the chemical reaction for the surface adsorption. Fe_3O_4 nanoparticles have been synthesized using sonochemical method using ultra frequency in aqueous solution under optimized conditions. The as-synthesized nanoparticle was analyzed using different characterization tool. The Transmission Electron microscope (TEM) images revealed 10-12 nm spherical shape nanoparticles; crystal phase and surface morphology was confirmed by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), respectively. The functional group were identified by Fourier Transform-Infra Red Spectroscopy (FT-IR), revealed the bending and stretching vibrations associated with Iron Oxide nanoparticle. In present study, for the efficient removal of contaminants, different concentration (10-50 ppm) of dye stuff effluent has been prepared and subjected to adsorption and decolourization at definite time intervals with Fe_3O_4 nanoparticles. The concentration of Iron oxide and the time (45 mins) was kept fixed for the reaction whereas the concentration of dye stuff effluent was kept varying. It was found that the spherical shaped Fe_3O_4 proved to be the potential material for the adsorption of

ENERGY RECOVERY FOR CONTINUOUS DYEING PROCESS IN TEXTILE INDUSTRY ENTERPRISES

Directory of Open Access Journals (Sweden)

V. N. Romaniuk

2015-01-01

Full Text Available The paper ascertains and presents alteration in the energy consumption as a consequence of utilizing the low-temperature waste streams commonly used in the lines of continuous dyeing at the finishing shops of textile enterprises of Belarus. The utilization realizes through the engagement of lithium-bromide absorption heat pumps with various energy characteristics such as the heating coefficient (relative conversion ratio COPhp = 1,15; 1,7; 2,2 and the heating capacity. The latter associates with the converted heat-flow energy utilization variant with the heat-transfer medium heating system scheme (one-, twoand multistage heating. The article considers transition to previously not applied service-water preheating due to the technological acceptance of feeding higher temperature water into the dyeing machine and widening specification of the heattransfer media. The authors adduce variants of internal and external energy use and their evaluation based on the relative energy and exergy characteristics. With results of the thermodynamic analysis of the modernized production effectiveness the researchers prove that alongside with traditional and apparent interior utilization of the energy associated with the stream heat recuperation, it is advisable to widen the range of applied heat-transfer media. The transition to the service water twoand multi-stage preheating is feasible. The study shows that the existing energy supply efficiency extremely low index-numbers improve by one or two degrees. Since they are conditioned, inter alia, by the machinery design, traditional approach to energy supply and heat-medium usage as well as the enterprise whole heating system answering requirements of the bygone era of cheap energy resources. The authors examine the continuous dyeing line modernization options intending considerable investments. Preliminary economic assessment of such inevitable modernization options for the enterprise entire heat-and-power system

Characteristics of dye-sensitized solar cells using natural dye

Energy Technology Data Exchange (ETDEWEB)

Furukawa, Shoji, E-mail: furukawa@cse.kyutech.ac.j [Graduate School of Computer Science and Systems Engineering, Kyushu Institute of Technology, 680-4 Kawazu, Iizuka-shi, Fukuoka-ken 820-8502 (Japan); Iino, Hiroshi; Iwamoto, Tomohisa; Kukita, Koudai; Yamauchi, Shoji [Graduate School of Computer Science and Systems Engineering, Kyushu Institute of Technology, 680-4 Kawazu, Iizuka-shi, Fukuoka-ken 820-8502 (Japan)

2009-11-30

Dye-sensitized solar cells are expected to be used for future clean energy. Recently, most of the researchers in this field use Ruthenium complex as dye in the dye-sensitized solar cells. However, Ruthenium is a rare metal, so the cost of the Ruthenium complex is very high. In this paper, various dye-sensitized solar cells have been fabricated using natural dye, such as the dye of red-cabbage, curcumin, and red-perilla. As a result, it was found that the conversion efficiency of the solar cell fabricated using the mixture of red-cabbage and curcumin was about 0.6% (light source: halogen lamp), which was larger than that of the solar cells using one kind of dye. It was also found that the conversion efficiency was about 1.0% for the solar cell with the oxide semiconductor film fabricated using polyethylene glycol (PEG) whose molecular weight was 2,000,000 and red-cabbage dye. This indicates that the cost performance (defined by [conversion efficiency]/[cost of dye]) of the latter solar cell (dye: red-cabbage) is larger by more than 50 times than that of the solar cell using Ruthenium complex, even if the effect of the difference between the halogen lamp and the standard light source is taken into account.

Evaluation of Toluene Exposure in Workers at Industrial Area of Sidoarjo, Indonesia by Measurement of Urinary Hippuric Acid

Directory of Open Access Journals (Sweden)

Moch Sahri

2013-12-01

How to cite this article: Sahri M, Widajati N. Evaluation of Toluene Exposure in Workers at Industrial Area of Sidoarjo, Indonesia by Measurement of Urinary Hippuric Acid. Asia Pac J Med Toxicol 2013;2:145-9.

Modified Multiwalled Carbon Nanotubes for Treatment of Some Organic Dyes in Wastewater

Directory of Open Access Journals (Sweden)

M. I. Mohammed

2014-01-01

Full Text Available In Iraq, a large quantity of basic orange and methyl violet dyes contaminated wastewater from textile industries is discharged into Tigris River. So the aim of this work is to found an efficient and fast technique that can be applied directly for removal of such dyes from the wastewater before discharging into river. Accordingly, CNTs as a new approach prepared by CCVD technique were purified, functionalized, and used as adsorption material to remove dyes from wastewater. The effect of pH, contact time, CNTs dosage, and dyes concentration on removal of pollutants was studied. The removal percentage of both dyes was proportional to the contact time, CNTs dosage, and pH and inversely proportional to the dyes concentration. The results show that the equilibrium time was 20 and 30 min for basic orange and methyl violet dyes, respectively, and the maximum removal percentage for all dyes concentrations was at pH = 8.5 and CNTs dosage of 0.25 g/L and 0.3 g/L for methyl violet and basic orange dye, respectively. The adsorption isotherm shows that the correlation coefficient of Freundlich model was higher than Langmuir model for both dyes, indicating that the Freundlich model is more appropriate to describe the adsorption characteristics of organic pollutants.

A Study of The Relationship Between The Components of The Five-Factor Model of Personality and The Occurrence of Occupational Accidents in Industry Workers

Directory of Open Access Journals (Sweden)

Ehsanollah Habibi

2016-05-01

Full Text Available Accidents are among the most important problems of both the developed and the developing countries. Individual factors and personality traits are the primary causes of human errors and contribute to accidents. The present study aims to investigate the relationship between the components of the five-factor model of personality and the occurrence of occupational accidents in industrial workers. The independent T-test indicated that there is a meaningful relationship between the personality traits and accident proneness. In the two groups of industry workers injured in occupational accidents and industry workers without any occupational accidents, there is a significant relationship between personality traits, neuroticism (p=0.001, openness to experience (p=0.001, extraversion (p=0.024 and conscientiousness (p=0.021. Nonetheless, concerning the personality trait of agreeableness (p = 0.09, the group of workers with accidents did not differ significantly from the workers without any accidents. The results showed that there is a direct and significant relationship between accident proneness and the personality traits of neuroticism and openness to experience. Furthermore, there is a meaningful but inverse correlation between accident proneness and the personality traits of extraversion and conscientiousness, while there was no relationship between accident proneness and the personality trait of agreeableness.

Psychosocial factors at work and perceived health among agricultural meat industry workers in France.

Science.gov (United States)

Cohidon, Christine; Morisseau, Patrick; Derriennic, Francis; Goldberg, Marcel; Imbernon, Ellen

2009-07-01

The objective of this study was to describe the perceived health status of the meat industry employees--i.e., working in the slaughtering, cutting, and boning of large animals and poultry--and its relation to their organisational and psychosocial constraints at work. This postal survey included all 3,000 employees of the meat industry (beef, pork and poultry) in four districts in Brittany, France, whose companies were affiliated with the agricultural branch of the national health insurance fund. The questionnaire asked for social and demographic data and information describing their job and the organisation of their work. The psychosocial factors at work were described according to Karasek's questionnaire (demand, latitude and social support at work). Perceived health was measured with the Nottingham Health Profile perceived health indicator. This study shows the high prevalence of poor health reported by the workers in this industry. This poor perceived health was worse in women and increased regularly with age. Among the psychosocial factors studied, high quantitative and qualitative demand at work, inadequate resources for good work and to a lesser extent, inadequate prospects for promotion appear especially associated with poor perceived health. Other factors often associated with poor perceived health included young age at the first job and work hours that disrupt sleep rhythms (especially for women). Our results show that this population of workers is especially vulnerable from the point of view of perceived physical and psychological health and is exposed to strong physical, organisational and psychosocial constraints at work. They also demonstrate that poor perceived health is associated with some psychosocial (such as high psychological demand and insufficient resources) and organisational factors at work. These results, in conjunction with those from other disciplines involved in studying this industry, may help the companies to develop preventive

Body mass index, blood pressure, and glucose and lipid metabolism among permanent and fixed-term workers in the manufacturing industry: a cross-sectional study.

Science.gov (United States)

Inoue, Mariko; Minami, Masahide; Yano, Eiji

2014-02-27

Temporary employment, a precarious form of employment, is recognized as social determinant of poor health. However, evidence supporting precarious employment as a risk factor for health is mainly obtained from subjective data. Studies using objective clinical measurement data in the assessment of health status are limited. This study compared body mass index (BMI), lipid and glucose metabolism, and health-related lifestyle factors between permanent workers and fixed-term workers employed in the manufacturing industry. Data of 1,701 male manufacturing industry workers triglyceride levels were determined. For glucose metabolism, fasting plasma glucose and hemoglobin A1c (HbA1c) levels were measured. Multiple regression analysis adjusted for age and lifestyle factors was performed. BMI was significantly higher in permanent workers (22.9 kg/m2) compared with fixed-term workers (22.4 kg/m2). The leaner population (BMI triglyceride (β = 11.147), fasting blood glucose (β = 2.218), and HbA1c (β = 0.107) compared with permanent workers (all p glucose metabolism, even when adjusted for age and lifestyle variables, although BMI of fixed-term workers were lower than permanent workers. Precarious work might contribute to a deteriorating health status even among less overweight populations.

High flux and antifouling properties of negatively charged membrane for dyeing wastewater treatment by membrane distillation

KAUST Repository

An, Alicia Kyoungjin; Guo, Jiaxin; Jeong, Sanghyun; Lee, Eui-Jong; Tabatabai, S. Assiyeh Alizadeh; Leiknes, TorOve

2016-01-01

This study investigated the applicability of membrane distillation (MD) to treat dyeing wastewater discharged by the textile industry. Four different dyes containing methylene blue (MB), crystal violet (CV), acid red 18 (AR), and acid yellow 36 (AY

The efficacy of radiant heat controls on workers' heat stress around the blast furnace of a steel industry.

Science.gov (United States)

Giahi, Omid; Darvishi, Ebrahim; Aliabadi, Mohsen; Khoubi, Jamshid

2015-01-01

Workers' exposure to excessive heat in molten industries is mainly due to radiant heat from hot sources. The aim of this study was to evaluate the efficacy of radiant heat controls on workers heat stress around a typical blast furnace. Two main interventions were applied for reducing radiant heat around the blast furnace of a steel industry located in western Iran. These included using a heat absorbing system in the furnace body and installing reflective aluminum barrier in the main workstation. Heat stress indexes were measured before and after each intervention using the digital WBGT-meter. The results showed MRT and WBGT indexes decreased by 20 °C and 3.9 °C, respectively after using heat absorbing system and also decreased by 18.6 °C and 2.5 °C, respectively after installing a reflective barrier. These indexes decrease by 26.5 °C and 5.2 °C, respectively due to the simultaneous application of the two interventions which were statistically significant (p steel industries.

[The systemic approach to the health protection in the workers of industrial enterprises].

Science.gov (United States)

Oransky, I E; Razumov, A N; Fedorov, A A

This paper presents the results of the systemic approach to the protection of health and prophylaxis of disability in the workers of industrial enterprises. The leading role in the technologies of rehabilitation (both short-term and long-term one) is played by the natural and physical therapeutic factors. The priority in the implementation of the therapeutic and health-promoting measures is given to the treatment based on the spa and health resort facilities as well as the factory health centers.

Assessment of the dye-sensitized solar cell

Energy Technology Data Exchange (ETDEWEB)

McConnell, R. D. [Center for Basic Sciences, National Renewable Energy Laboratory, MIS 3211, 1617 Cole Boulevard, Golden, CO 80401 (United States)

2002-09-01

The field of solar electricity, or photovoltaics (PV), is rich in that there are many materials and concepts for converting sunlight into electricity. The technologies accepted as conventional are those well along in the process of commercialization. The dye-sensitized solar cell, developed in the 1990s, is a nonconventional solar electric technology that has attracted much attention, perhaps a result of its record cell efficiency above 10%. This paper reviews the technology, discusses new research results and approaches presented at a recent symposium of many of the world's important dye solar cell researchers, and presents an assessment of the dye-sensitized solar cell in a comparison with current conventional solar electric technologies. It concludes the dye solar cell has potential for becoming a cost-effective means for producing electricity, capable of competing with available solar electric technologies and, eventually, with today's conventional power technologies. But it is a relatively new technology and faces many hurdles on the path to commercialization. Because of its potential, this assessment recommends further funding for research and development (RandD) of the dye-sensitized solar cell technology on the basis of the promising technical characteristics of the technology, a strong US and worldwide research base, positive industry interest, and today's relatively small funding allocation for its RandD. (Author)

Evaluation of Nuisance Dust Health Effects on the Workers in a Tile Industry

Directory of Open Access Journals (Sweden)

A.R. Koohpaei

2008-07-01

Full Text Available Background and objectivesAir pollution in the occupational fields and its economical effects on the health care system is studied from different viewpoints such as products quality, equipment damage, environment preservation, and air pollution control. Nowadays, a lot of attention has been turned toward health effects of air pollution. The objective of this study is detection of the total dust concentration and assessment of the health effect of nuisance dust among workers in a tile production factory.MethodsIn this study airborne dust concentration was measured and evaluated by using NIOSH 0500 method. In order to determine the health effects, a standard questionnaire was used. All of personnel of workshop 1 (n=50 and workshop 2 (n=50 were assigned to the case group and one hundreds of factory employees were assigned to the control group. Results analyzed using Z test.ResultsAccording to the obtained results, concentration of dust in workshop 1 corridor was higher than that of workshop 2 corridor (59.262 mg/m3 and 32.158 mg/m3 respectively. Also, these results showed that there are significant differences between two groups in incidence of symptoms such as dry cough, eye irritation, skin redness, shortness of breath, blurred vision, skin irritation, hoarseness of voice, dry mouth and throat, throat itching and skin itching (P<0.05. However, there were not significant differences in incidence of headache, chest pain, epiphora of eyes, mucus cough, sinus problems and chest wheezing between two groups.ConclusionOn the basis of these results it was revealed that nuisance dust can affect human health and performance. This in turn can increase the medical service load and costs. As a result of inadequate control systems established in the industries, lack of information and appropriate training, and lack of personal protective equipment all across the industries, we suggest a more comprehensive research project to evaluate the effects of industrial

Dye-Sensitized Approaches to Photovoltaics

Science.gov (United States)

Grätzel, Michael

2008-03-01

. However a TCO on glass or polymer counterelectrode is widely used. In either case suitable electrocatalytic behavior is required and frequently a nanodispersed Pt precipitated from haxachloride solution is employed. It is by now evident that the achievement of an industrially-competitive sensitized photoelectrochemical solar cell is the result of the optimization of several components, associated obviously with their effective synergy. Each change of a single component has repercussions on the choice and performance of others. However as already mentioned an efficiency of over 11% has now been certified, and a stability of over 14,000 hours under accelerated testing with continuous simulated AM1.5 illumination was recently reported. In consequence there is increasing confidence on the part of industry. Several licensees of EPFL patents on dye---sensitized photovoltaic systems are now preparing for large-scale production. G24 Innovations PLC in Wales is commissioning a manufacturing plant, and Dyesol PLC in Australia is making available the required materials on an industrial scale. In conclusion, then, it can be stated that the DSC system is much more than a fascinating scientific artifact illustrating charge-transfer mechanisms at electrochemical interfaces; an efficiency and reliability with industrial credibility have been demonstrated and verified, and a significant role in competition with other photosystems can be foreseen.

Ergonomic prevention of musculoskeletal disorders of maintenance workers in the steel industry : Guidelines for the optimum working height of selected maintenance operations

NARCIS (Netherlands)

Dul, J.; Bolijn, A.J.; Delleman, N.J.; Hildebrandt, V.H.

1991-01-01

In the steel industry musculoskeletal disorders are important determinants of sickness and absenteeism. Prevention of biomechanical risk is therefore important, both for industry and the workers themselves. In this research project, ergonomic guidelines have been developed to reduce high

Study of Modern Nano Enhanced Techniques for Removal of Dyes and Metals

Directory of Open Access Journals (Sweden)

Samavia Batool

2014-01-01

Full Text Available Industrial effluent often contains the significant amount of hexavalent chromium and synthetic dyes. The discharge of wastewater without proper treatment into water streams consequently enters the soil and disturbs the aquatic and terrestrial life. A range of wastewater treatment technologies have been proposed which can efficiently reduce both Cr(VI and azo dyes simultaneously to less toxic form such as biodegradation, biosorption, adsorption, bioaccumulation, and nanotechnology. Rate of simultaneous reduction of Cr(VI and azo dyes can be enhanced by combining different treatment techniques. Utilization of synergistic treatment is receiving much attention due to its enhanced efficiency to remove Cr(VI and azo dye simultaneously. This review evaluates the removal methods for simultaneous removal of Cr(VI and azo dyes by nanomicrobiology, surface engineered nanoparticles, and nanophotocatalyst. Sorption mechanism of biochar for heavy metals and organic contaminants is also discussed. Potential microbial strains capable of simultaneous removal of Cr(VI and azo dyes have been summarized in some details as well.

COPD and occupation: a retrospective cohort study of industrial workers.

Science.gov (United States)

Mazitova, Nailya N; Saveliev, Anatoly A; Berheeva, Zuhra M; Amirov, Nail Kh

2012-09-01

The aim of this paper was to ascertain chronic obstructive pulmonary disease (COPD) prevalence among industrial workers in the Russian Federation and determine relative contribution of smoking and occupational factors to COPD. We recruited 1,375 workers aged 30 or over. Six hundred and twenty-four of them were occupationally exposed to vapours, gases, dust, and fumes (VGDF). Physical examination and baseline spirometry were performed for all the participants of the study. Those with airfl ow limitation of FEV1/FVC<0.70 were considered having COPD and those with presence of cough and sputum production for at least three months in each of two consecutive years were considered having chronic bronchitis (CB), with no overlapping between these 2 groups. Data on occupational history and VGDF levels in the working area were collected from all participants. In total, 105 cases of COPD and 170 cases of CB were diagnosed in the cohort of examined workers. Occupational exposure to VGDF was twice as often present among COPD patients than among both patients with CB and the control group of healthy workers (p<0.05). More than 40 % of COPD patients were occupationally exposed to VGDF above the value of 3.0 of the occupational exposure limit (OEL) and more than 20 % to 6.0 OEL and higher. Overall odds ratio for COPD development due to occupational VGDF exposure was 5.9 (95 % CI=3.6 to 9.8, p=0.0001). Both smoking and VGDF seem to be important for the development of COPD. Analysis of the combined effect of tobacco smoking and occupational noxious particles and gases on COPD development has shown the following order of risk factors based on the strength of their infl uence: VGDF levels, smoking index, age, and heating microclimate. There is a statistically signifi cant level of relationship and "dose-effect" dependence between occupational exposures to VGDF and the development of COPD. The effect of VGDF composition on the probability of COPD development was not found in the study

Worker Preferences for a Mental Health App Within Male-Dominated Industries: Participatory Study.

Science.gov (United States)

Peters, Dorian; Deady, Mark; Glozier, Nick; Harvey, Samuel; Calvo, Rafael A

2018-04-25

Men are less likely to seek help for mental health problems, possibly because of stigma imposed by cultural masculine norms. These tendencies may be amplified within male-dominated workplaces such as the emergency services or transport industries. Mobile apps present a promising way to provide access to mental health support. However, little is known about the kinds of mental health technologies men would be willing to engage with, and no app can be effective if the intended users do not engage with it. The goal of this participatory user research study was to explore the perceptions, preferences, and ideas of workers in male-dominated workplaces to define requirements for a mental health app that would be engaging and effective at improving psychological well-being. Workers from male-dominated workplaces in rural, suburban, and urban locations took part in an exploratory qualitative study involving participatory workshops designed to elicit their perspectives and preferences for mental health support and the design of an app for mental health. Participants generated a number of artifacts (including draft screen designs and promotional material) designed to reify their perceptions, tacit knowledge, and ideas. A total of 60 workers aged between 26 and 65 years, 92% (55/60) male, from male-dominated workplaces in rural (16/60, 27%), suburban (14/60, 23%), and urban (30/60, 50%) locations participated in one of the 6 workshops, resulting in 49 unique feature ideas and 81 participant-generated artifacts. Thematic analysis resulted in a set of feature, language, and style preferences, as well as characteristics considered important by participants for a mental health app. The term "mental health" was highly stigmatized and disliked by participants. Tools including a mood tracker, self-assessment, and mood-fix tool were highly valued, and app characteristics such as brevity of interactions, minimal on-screen text, and a solutions-oriented approach were considered

Waste metal hydroxide sludge as adsorbent for a reactive dye.

Science.gov (United States)

Santos, Sílvia C R; Vílar, Vítor J P; Boaventura, Rui A R

2008-05-30

An industrial waste sludge mainly composed by metal hydroxides was used as a low-cost adsorbent for removing a reactive textile dye (Remazol Brilliant Blue) in solution. Characterization of this waste material included chemical composition, pH(ZPC) determination, particle size distribution, physical textural properties and metals mobility under different pH conditions. Dye adsorption equilibrium isotherms were determined at 25 and 35 degrees C and pH of 4, 7 and 10 revealing reasonably fits to Langmuir and Freundlich models. At 25 degrees C and pH 7, Langmuir fit indicates a maximum adsorption capacity of 91.0mg/g. An adsorptive ion-exchange mechanism was identified from desorption studies. Batch kinetic experiments were also conducted at different initial dye concentration, temperature, adsorbent dosage and pH. A pseudo-second-order model showed good agreement with experimental data. LDF approximation model was used to estimate homogeneous solid diffusion coefficients and the effective pore diffusivities. Additionally, a simulated real effluent containing the selected dye, salts and dyeing auxiliary chemicals, was also used in equilibrium and kinetic experiments and the adsorption performance was compared with aqueous dye solutions.

Characteristics of a Broadband Dye Laser Using Pyrromethene and Rhodamine Dyes

Science.gov (United States)

Tedder, Sarah A.; Danehy, Paul M.; Wheeler, Jeffrey L.

2011-01-01

A broadband dye laser pumped by a frequency-doubled Nd:YAG laser with a full-width half-maximum (FWHM) from 592 to 610 nm was created for the use in a dual-pump broadband CARS system called WIDECARS. The desired broadband dye laser was generated with a mixture of Pyrromethene dyes as an oscillator gain medium and a spectral selective optic in the oscillator cavity. A mixture of Rhodamine dyes were used in the amplifier dye cell. To create this laser a study was performed to characterize the spectral behavior of broadband dye lasers created with Rhodamine dyes 590, 610, and 640, Pyrromethene dyes 597 and 650 as well as mixture of these dyes.

OPTIMIZATION OF DYEING PARAMETERS TO DYE COTTON WITH CARROT EXTRACTION

Directory of Open Access Journals (Sweden)

MIRALLES Verónica

2017-05-01

Full Text Available Natural dyes derived from flora and fauna are believed to be safe because of non-toxic, non-carcinogenic and biodegradable nature. Furthermore, natural dyes do not cause pollution and waste water problems. Natural dyes as well as synthetic dyes need the optimum parameters to get a good dyeing. On some occasions, It is necessary the use of mordants to increase the affinity between cellulose fiber and natural dye, but there are other conditions to optimize in the dyeing process, like time, temperature, auxiliary porducts, etc. In addition, the optimum conditions are different depends on the type of dye and the fiber nature. The aim of this work is the use of carrot extract to dye cotton fabric by exhaustion at diverse dyeing conditions. Diffferent dyeing processes were carried out to study the effect of pH condition and the temperature, using 7, 6 and 4 pH values and 95 ºC and 130ºC for an hour. As a result some images of dyed samples are shown. Moreover, to evaluate the colour of each sample CIELAB parameters are analysed obtained by reflexion spectrophotometre. The results showed that the temperature used has an important influence on the colour of the dyed sample.

Second analysis of mortality of nuclear industry workers in Japan, 1986-1997

International Nuclear Information System (INIS)

Ohshima, Sumio; Murata, Motoi

2001-01-01

This article is a commentary concerning the second report of the study in the title committed by the Science and Technology Agency (the present Ministry of Education, Culture, Sports, Science and Technology) to Radiation Effects Association. The study is an epidemiological one as for the relationships between long-term low dose radiation and its health effects in workers of nuclear industry like nuclear power plant and uses the cohort methodology for the factor (exposure dose) and diseases (mortality). In about 244,000 personnel, mortality was calculated from obtainable 179,000 resident cards of object males. For those died during the study period, cause of death was checked with the card for the movement of population (Ministry of Health, Labor and Welfare). The exposure dose was checked with the dose records of radiation workers stored in the registration center. Analysis results of standardized mortality ratio (comparison of mortality of the objects and non-object Japanese males) and of correlation of integrated dose and mortality gave no clear evidence that the low dose radiation exposure affects the mortality due to cancer. (K.H.)

Risks for heart disease and lung cancer from passive smoking by workers in the catering industry.

Science.gov (United States)

Hedley, Anthony J; McGhee, Sarah M; Repace, James L; Wong, Lai-Chin; Yu, Marcus Y S; Wong, Tze-Wai; Lam, Tai-Hing

2006-04-01

Workers in the catering industry are at greater risk of exposure to secondhand smoke (SHS) when smoke-free workplace policies are not in force. We determined the exposure of catering workers to SHS in Hong Kong and their risk of death from heart disease and lung cancer. Nonsmoking catering workers were provided with screening at their workplaces and at a central clinic. Participants reported workplace, home, and leisure time exposure to SHS. Urinary cotinine was estimated by enzyme immunoassay. Catering facilities were classified into three types: nonsmoking, partially restricted smoking (with nonsmoking areas), and unrestricted smoking. Mean urinary cotinine levels ranged from 3.3 ng/ml in a control group of 16 university staff through 6.4 ng/ml (nonsmoking), 6.1 ng/ml (partially restricted), and 15.9 ng/ml (unrestricted smoking) in 104 workers who had no exposures outside of work. Workers in nonsmoking facilities had exposures to other smoking staff. We modeled workers' mortality risks using average cotinine levels, estimates of workplace respirable particulates, risk data for cancer and heart disease from cohort studies, and national (US) and regional (Hong Kong) mortality for heart disease and lung cancer. We estimated that deaths in the Hong Kong catering workforce of 200,000 occur at the rate of 150 per year for a 40-year working-lifetime exposure to SHS. When compared with the current outdoor air quality standards for particulates in Hong Kong, 30% of workers exceeded the 24-h and 98% exceeded the annual air quality objectives due to workplace SHS exposures.

Experiences in the monitoring of radiation workers in industry and hospitals in the Philippines

International Nuclear Information System (INIS)

Mateo, A.J.

1976-08-01

The task of monitoring of radiation doses among radiation workers employed either in industry and hospitals in the Philippines is presently being undertaken by the Philippine Atomic Energy Commission. These radiation monitoring devices cover not only radioactive materials or sources but also x-ray machines. The most common dosimetry used is the film badge. This paper presents some of the experiences gained in the use of the film badge and other dosimeters

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

Science.gov (United States)

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Using Eggshell in Acid Orange 2 Dye Removal from Aqueous Solution

Directory of Open Access Journals (Sweden)

Ahmad Reza Yari

2015-05-01

Full Text Available Background and purpose: Generated dye wastewater by the textile industry is usually toxic, non-biodegradable and resistant in the environment. Eggshell is one of the inexpensive material and for the reason the vesicular structures can be used as a proper adsorbent for pollutants removal. The aim of this study is to investigate the efficiency of eggshell for removal of acid orange 2 dye from aqueous solution. Materials and Methods: In the experimental study was determined the efficacy of variant variables such as contact time (15, 30, 60, 90 and 120 min, pH (3, 7 and 11, adsorbent dose (10, 25, 50 and 75 g/L, and initial dye concentration (25, 50 and 100 mg/L. The concentration of dye by spectrophotometer ultraviolet/visible in the wavelength 483 nm was examined. Results: The results showed that with increasing contact time and adsorbent dose, the dye removal efficiency was increased, but with increasing pH and initial dye concentration the removal efficiency was decreased. The maximum of removal efficiency of acid orange 2 dye got in the optimum pH: 3, contact time: 90 min, adsorbent dose: 50 g/L and initial dye concentration: 25 mg/L. Adsorption of acid orange 2 dye (R2 = 0.87 follow the Freundlich isotherm. Conclusion: Eggshells can be used as an inexpensive and effective adsorbent for the removal of acid orange 2 dye.

An Overview: Recent Development of Titanium Oxide Nanotubes as Photocatalyst for Dye Degradation

Directory of Open Access Journals (Sweden)

Chin Wei Lai

2014-01-01

Full Text Available Today, organic dyes are one of the largest groups of pollutants release into environment especially from textile industry. It is highly toxic and hazardous to the living organism; thus, the removal of these dyes prior to discharge into the environment is essential. Varieties of techniques have been employed to degrade organic dyes and heterogeneous photocatalysis involving titanium dioxide (TiO2 appears to be the most promising technology. In recent years, TiO2 nanotubes have attracted much attention due to their high surface area and extraordinary characteristics. This paper presents a critical review of recent achievements in the modification of TiO2 nanotubes for dye degradation. The photocatalytic activity on dye degradation can be further enhanced by doping with cationic or anionic dopant.

Effect of psychosocial factors on low back pain in industrial workers.

Science.gov (United States)

Ghaffari, Mostafa; Alipour, Akbar; Farshad, Ali Asghar; Jensen, Irene; Josephson, Malin; Vingard, Eva

2008-08-01

To test the hypothesis that workplace psychosocial factors such as demand, control, support, job satisfaction and job appreciation can predict the future onset of disabling low back pain (LBP). The present study involved a prospective cohort of 4500 Iranian industrial workers. Data were gathered by means of a self-reported questionnaire about LBP, as well as working life exposure, lifestyle factors, social exposures, co-morbidity, life events and psychosomatic complaints in 2004. All new episodes of disabling LBP resulting in medically certified sick leave during the 1-year follow-up registered by occupational health clinic inside the factory. The participation rate was good (85%). A total of 744 subjects reported current LBP (point prevalence cases). A total of 52 (appreciation showed increased odds ratios, and these results were statistically significant. Few prospective studies in this field have been published, but all of them are related to industrialized countries. This prospective study suggests the aetiological role of job strain for LBP. The findings of this study indicate a substantial potential for disease prevention and health promotion at the workplace.

Azoreductase and dye detoxification activities of Bacillus velezensis strain AB.

Science.gov (United States)

Bafana, Amit; Chakrabarti, Tapan; Devi, Sivanesan Saravana

2008-01-01

Azo dyes are known to be a very important and widely used class of toxic and carcinogenic compounds. Although lot of research has been carried out for their removal from industrial effluents, very little attention is given to changes in their toxicity and mutagenicity during the treatment processes. Present investigation describes isolation of a Bacillus velezensis culture capable of degrading azo dye Direct Red 28 (DR28). Azoreductase enzyme was isolated from it, and its molecular weight was found to be 60 kDa. The enzyme required NADH as cofactor and was oxygen-insensitive. Toxicity and mutagenicity of the dye during biodegradation was monitored by using a battery of carefully selected in vitro tests. The culture was found to degrade DR28 to benzidine and 4-aminobiphenyl, both of which are potent mutagens. However, on longer incubation, both the compounds were degraded further, resulting in reduction in toxicity and mutagenicity of the dye. Thus, the culture seems to be a suitable candidate for further study for both decolourization and detoxification of azo dyes, resulting in their safe disposal.

Characteristics of dye Rhoeo spathacea in dye sensitizer solar cell (DSSC)

Science.gov (United States)

Sumardiasih, Sri; Obina, Wilfrida M.; Cari; Supriyanto, Agus; Septiawan, Trio Y.; Khairuddin

2017-01-01

Dye-sensitized solar cell (DSSC) is a device that converts solar energy into electrical energy. The magnitude of the efficiency of DSSC is mainly based on the amount of dye absorbed by the surface of TiO2. In this work, used natural dye extracted from leaves Rhoeo spathacea. The dye partially used to immerse of TiO2 as working electrodes, and the rest are directly mixed TiO2 paste to obtain dye titanium dioxide.The paste TiO2 and dye titanium dioxide coated onto the fluorine-doped tin oxide (FTO) glass plate by spin coating method. The absorbance spectra of the dye, dye titanium dioxide and TiO2 were obtained by UV-Vis spectroscopy. The conductivity of the dye, dye titanium dioxide, and TiO2 was measured by two point probe El-Kahfi 100. The DSSC based on dye titanium dioxide that stirring for 5 hours the highest efficiency of 0,0520 % whereas those based on TiO2 immersed for 36 hours showed achieved 0,0501 % obtained from I-V characterization.

Characteristics of dye Rhoeo spathacea in dye sensitizer solar cell (DSSC)

International Nuclear Information System (INIS)

Sumardiasih, Sri; Obina, Wilfrida M.; Cari; Supriyanto, Agus; Septiawan, Trio Y.; Khairuddin

2017-01-01

Dye-sensitized solar cell (DSSC) is a device that converts solar energy into electrical energy. The magnitude of the efficiency of DSSC is mainly based on the amount of dye absorbed by the surface of TiO 2 . In this work, used natural dye extracted from leaves Rhoeo spathacea. The dye partially used to immerse of TiO 2 as working electrodes, and the rest are directly mixed TiO 2 paste to obtain dye titanium dioxide.The paste TiO 2 and dye titanium dioxide coated onto the fluorine-doped tin oxide (FTO) glass plate by spin coating method. The absorbance spectra of the dye, dye titanium dioxide and TiO 2 were obtained by UV-Vis spectroscopy. The conductivity of the dye, dye titanium dioxide, and TiO 2 was measured by two point probe El-Kahfi 100. The DSSC based on dye titanium dioxide that stirring for 5 hours the highest efficiency of 0,0520 % whereas those based on TiO 2 immersed for 36 hours showed achieved 0,0501 % obtained from I-V characterization. (paper)

An analysis of workers' morale in the coal mining industry using principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J; La Court, C; Pearson, J M

1987-03-01

This paper looks at labour morale in the coal mining industry from 1967 to 1984. In particular it examines absenteeism, turnover and accidents over that period, as well as constructing an index of morale based on these variables. The data are taken from the North Nottinghamshire and South Yorkshire coal areas, and a comparison is made between these areas in the period leading up to the industrial action in 1984/85. The indices constructed indicate that morale, as measured by the first principal component, increased considerably during the years before the 1984 industrial dispute and that low morale was an unlikely reason for the dispute, although morale in South Yorkshire, a strike area, was lower than in North Nottinghamshire, largely a non-strike area. The steep rise in morale in both North Nottinghamshire and South Yorkshire follows closely the rise in unemployment nationally and may simply be an indication of conventional industrial relations assumptions that manifestations of negative worker attitudes are greatest when jobs are relatively plentiful, and considerably less so when jobs are scarce.

Adjustment for smoking reduces radiation risk: fifth analysis of mortality of nuclear industry workers in Japan, 1999-2010

Energy Technology Data Exchange (ETDEWEB)

Kudo, S.; Ishida, J.; Yoshimoto, K.; Mizuno, S.; Ohshima, S.; Kasagi, F., E-mail: s_kudo@rea.or.jp [Instituto of Radiation Epidemiology, Radiation Effects Association, 1-9-16 Kajicho, Chiyoda-ku, 101-0044 Tokyo (Japan)

2015-10-15

Full text: Many cohort studies among nuclear industry workers have been carried out to determine the possible health effects of low-level radiation. In those studies, confounding factors, for example, age was adjusted to exclude the effect of difference of mortality by age to estimate radiation risk. But there are few studies adjusting for smoking that is known as a strong factor which affects mortality. Radiation Effects Association (Rea) initiated a cohort study of nuclear industry workers mortality in 1990. To examine non-radiation factors confounding on the mortality risk among the radiation workers, Rea have performed life-style questionnaire surveys among the part of workers at 1997 and 2003 and found the correlation between radiation dose and smoking rate. Mortality follow-up were made on 75,442 male respondents for an average of 8.3 years during the observation period 1999-2010. Estimates of Excess Relative Risk percent (Err %) per 10 mSv were obtained by using the Poisson regression. The Err for all causes was statistically significant (1.05 (90 % CI 0.31 : 1.80)), but no longer significant after adjusting for smoking (0.45 (-0.24 : 1.13)). The Err for all cancers excluding leukemia was not significant (0.92 (-0.30 : 2.16)), but after adjusting for smoking, it decreased (0.36 (-0.79 : 1.50)). Thus smoking has a large effect to obscure a radiation risk, so adjustment for smoking is important to estimate radiation risk. (Author)

Adjustment for smoking reduces radiation risk: fifth analysis of mortality of nuclear industry workers in Japan, 1999-2010

International Nuclear Information System (INIS)

Kudo, S.; Ishida, J.; Yoshimoto, K.; Mizuno, S.; Ohshima, S.; Kasagi, F.

2015-10-01

Full text: Many cohort studies among nuclear industry workers have been carried out to determine the possible health effects of low-level radiation. In those studies, confounding factors, for example, age was adjusted to exclude the effect of difference of mortality by age to estimate radiation risk. But there are few studies adjusting for smoking that is known as a strong factor which affects mortality. Radiation Effects Association (Rea) initiated a cohort study of nuclear industry workers mortality in 1990. To examine non-radiation factors confounding on the mortality risk among the radiation workers, Rea have performed life-style questionnaire surveys among the part of workers at 1997 and 2003 and found the correlation between radiation dose and smoking rate. Mortality follow-up were made on 75,442 male respondents for an average of 8.3 years during the observation period 1999-2010. Estimates of Excess Relative Risk percent (Err %) per 10 mSv were obtained by using the Poisson regression. The Err for all causes was statistically significant (1.05 (90 % CI 0.31 : 1.80)), but no longer significant after adjusting for smoking (0.45 (-0.24 : 1.13)). The Err for all cancers excluding leukemia was not significant (0.92 (-0.30 : 2.16)), but after adjusting for smoking, it decreased (0.36 (-0.79 : 1.50)). Thus smoking has a large effect to obscure a radiation risk, so adjustment for smoking is important to estimate radiation risk. (Author)

Measuring the Prevalence and Incidence of Low Back Pain Disorders Among American Workers in the Aerospace and Defense Industry.

Science.gov (United States)

Goetzel, Ron Z; D'Arco, Malinda; Thomas, Jordana; Wang, Degang; Tabrizi, Maryam J; Roemer, Enid Chung; Prasad, Aishwarya; Yarborough, Charles M

2015-09-01

To determine the prevalence and incidence of low back pain (LBP) among workers in the aerospace and defense industry and in a specific company. Claims and demographic data from the Truven Health MarketScan normative database representing more than 1 million workers were drawn from a group of 18 US benchmark companies and compared with one particular company, Lockheed Martin Corporation. The prevalence of LBP in the MarketScan normative group was 15.6% in the final study year (2012), whereas the incidence of new cases was 7.2% and 7.3% in years 2011 and 2012, respectively. Compared with the normative group, the company's prevalence and incidence rates were lower. Women and older workers were more likely to experience LBP compared with men and younger workers. The analysis was used to inform the company's leadership about the health burden of the condition and evaluate alternative treatment options to prevent the incidences and reduce the prevalence of clinical back pain among workers.

The effects of outsourcing on occupational health and safety: a comparative study of factory-based workers and outworkers in the Australian clothing industry.

Science.gov (United States)

Mayhew, C; Quinlan, M

1999-01-01

Outsourcing has become increasingly widespread throughout industrialized societies over the past 20 years. Accompanying this has been a renewed growth in home-based work, sometimes using new technologies (telework) but also entailing a re-emergence of old forms, such as clothing outwork, used extensively 100 years ago. A growing body of research indicates that changes to work organization associated with outsourcing adversely affect occupational health and safety (OHS), both for outsourced workers and for those working alongside them. This study assessed the OHS implications of the shift to home-based workers in the Australian clothing industry by systematically comparing the OHS experiences of 100 factory-based workers and 100 outworkers. The level of self-reported injury was over three times higher among outworkers than factory-based workers undertaking similar tasks. The most significant factor explaining this difference was the payment system. All outworkers were paid solely by the piece, whereas factory workers were paid either under a time plus production bonus system or solely on a time basis. While the incidence of injury was far higher among outworkers, factory-based workers paid under an incentive system reported more injuries than those paid solely on a time basis. Increasing injury was correlated with piecework payment systems.

Evaluation of the effects of occupational noise exposure on serum aldosterone and potassium among industrial workers

Directory of Open Access Journals (Sweden)

Sajad Zare

2016-01-01

Full Text Available The existing literature indicates that occupational exposure to noise may have adverse effects on workers′ health. The aim of this study was to evaluate the possible effects of exposure to different sound pressure levels (SPLs on serum aldosterone and potassium concentration among Iranian blue collar workers in Golgohar Mining and Industrial Company in Sirjan, Kerman Province, Iran. This case-control study was performed on 45 workers of Golgohar Mining and Industrial Company. The subjects consisted of 30 workers from manufacturing departments and 15 office employees of the mining company. The controls, mainly with administrative jobs were exposed to 72 dBA SPL. Cases, in two separate groups, were exposed to noise levels of 88 dBA and 103 dBA, respectively. Noise intensity was measured at the desired locations. Noise measurements were performed according to the International Organization for Standardization (ISO 9612. To measure the serum aldosterone and potassium concentrations, a 5 mL blood sample was taken from each worker at the specified time intervals and aldosterone concentration was determined using enzyme-linked immunosorbent assay (ELISA test in the laboratory. Repeated measurement and Spearman′s correlation coefficient analysis were used with α = 0.05. Exposure to the different levels of sound pressure resulted in different aldosterone concentrations and meanwhile an increase in the SPL did not affect the concentration of potassium. From 10:00 AM to 10:30 AM, as SPL increased, aldosterone concentrations did not increase significantly but from 13:30 PM to 14:00 PM, raised SPL led to a significant increase in aldosterone concentration. However, there was no correlation between the concentration of potassium and different factors. This study indicated that increases in SPLs affect aldosterone concentration but at the same time do not have significant effects on serum potassium level.

Specific training in Radiation Protection for workers in the scrap metal recycling industry in Spain

International Nuclear Information System (INIS)

Correa Sainz, C.; Ortiz Ramis, T.; Pinilla Matos, J.L.; Fuentes Fuentes, L.; Gonzalez, C.O.

2006-01-01

Enresa, as signatory of the Spanish Protocol on radiological surveillance of metal materials, collaborates in the training programme for workers in the metal recycling sector. Since 1998 a total of 16 training courses have been held with a total of 332 workers from smelting and recovery companies. Furthermore information and publicity campaigns have been held for employees in the metal industry. Two types of courses are held: a Basic Course directed at first responders and an specialized Advanced Course concentrating on radiological characterisation of detected material. The evaluation of the courses by the participants has always been very positive, with the Basic Course being more popular. The practical classes are very much appreciated by the participants. In the future the Basic Course will be held once or twice per year, according to demand, and the Advanced Course will be held every two years as a minimum and always providing there is a minimum number of participants. Refresher courses for workers who are already carrying out the tasks of localisation, segregation and characterisation of radioactive material are also planned. (authors)

Specific training in Radiation Protection for workers in the scrap metal recycling industry in Spain

Energy Technology Data Exchange (ETDEWEB)

Correa Sainz, C.; Ortiz Ramis, T. [ENRESA. Madrid (Spain); Pinilla Matos, J.L.; Fuentes Fuentes, L. [ENRESA. Centro de Almacenamiento El Cabril, Cordoba (Spain); Gonzalez, C.O. [AdQ, Madrid (Spain)

2006-07-01

Enresa, as signatory of the Spanish Protocol on radiological surveillance of metal materials, collaborates in the training programme for workers in the metal recycling sector. Since 1998 a total of 16 training courses have been held with a total of 332 workers from smelting and recovery companies. Furthermore information and publicity campaigns have been held for employees in the metal industry. Two types of courses are held: a Basic Course directed at first responders and an specialized Advanced Course concentrating on radiological characterisation of detected material. The evaluation of the courses by the participants has always been very positive, with the Basic Course being more popular. The practical classes are very much appreciated by the participants. In the future the Basic Course will be held once or twice per year, according to demand, and the Advanced Course will be held every two years as a minimum and always providing there is a minimum number of participants. Refresher courses for workers who are already carrying out the tasks of localisation, segregation and characterisation of radioactive material are also planned. (authors)

Work, gender roles, and health: neglected mental health issues among female workers in the ready-made garment industry in Bangladesh

Directory of Open Access Journals (Sweden)

Akhter S

2017-08-01

Full Text Available Sadika Akhter,1,2 Shannon Rutherford,1 Feroza Akhter Kumkum,2 David Bromwich,1 Iqbal Anwar,2 Aminur Rahman,2 Cordia Chu1 1Centre for Environment and Population Health, Griffith University, Brisbane, QLD, Australia; 2International Centre for Diarrhoeal Disease Research Bangladesh, Dhaka, Bangladesh Background: Traditionally, women in Bangladesh stayed at home in their role as daughter, wife, or mother. In the 1980s, economic reforms created a job market for poor, uneducated rural women in the ready-made garment industry, mostly located in urban areas. This increased participation in paid work has changed the gender roles of these women. Women’s earnings support their family, but they are also separated from their children, with impacts on their mental health and well-being. This study explores the lived experience of women in Bangladesh working in the ready-made garment industry as they strive to be mothers and family providers, often in high-stress conditions.Methods: The study was conducted in two industrial areas of Dhaka over 8 months. Data collection included a literature review, 20 in-depth interviews with married female garment workers, and 14 key-informant interviews with officials from the Ministry of Labour and Employment, health-service providers within the garment factories, factory managers, and representatives of the Bangladesh Garment Manufacturers and Exporters Association. The data collected were analyzed thematically.Results: Poverty was a key motivating factor for female migrant workers to move from rural areas. Their children stay in their village with their grandparents, because of their mothers’ work conditions and the lack of childcare. The women reported stress, anxiety, restlessness, and thoughts of suicide, due to the double burden of work and separation from their children and family support. Further, they cannot easily access government hospital services due to their long work hours, and the limited medical

ISOLASI DAN KARAKTERISASI JAMUR PENDEGRADASI ZAT PEWARNA TEKSTIL (Isolation and Characterization of dye-degrading Fungi

Directory of Open Access Journals (Sweden)

Erni Martani

2011-07-01

. ABSTRACT The aim of this study was to isolate textile dye degrading fungi from many kinds of sample. Isolation was done using surface plating method on Potato Dextrose Agar medium. Degradation ability was measured based on dye decolorization of agar medium. The selection of isolates was based on ability to decolorize some types of dye, rate of decolorization, and tolerance to dye concentration, respectively. Six kinds dye, namely Basic fuchsin, Crystal violet, Direct blue, Methylene blue, Rhodamine B, and Safranine were used in this study. Six species of lignin degrading white rot fungi were used as positive controls. More than 100 fungal strains could be isolated from waste water and solid wastes of textile and pulp & paper industries, peat soils from Central Kalimantan and Riau, and forest soil. Examination on dye decolorization resulted in 6 selected isolates (coded as JKNT-1, JKSC-1, KRMS 5, TPA-4, TPA-10, and JYGC-1; and 2 species of lignin degrading white rot fungi, namely Phanerochaete chrysosporium and Pleurotus ostreatus. Decolorization of dye was depended on the fungal species and type of dye, i.e. one species decolorized some dyes but not the others. Methylene Blue was decolorized more readily than other dyes. In general, dye decolorization activity of fungal isolates was lower than the lignin degrading fungi. Microscopic examination indicated that the isolates of JKNT 1 and KRMS-5 were come from the genus Penicillium, the genus of JKSC-1 was Stachybotrys, the TPA-4 and JYGC-1 were Cladosporium, and TPA-10 isolate was included in genus of Aspergillus.

Laser Dyes

Indian Academy of Sciences (India)

amplification or generation of coherent light waves in the UV,. VIS, and near IR region. .... ciency in most flashlamp pumped dye lasers. It is used as reference dye .... have led to superior laser dyes with increased photostabilities. For instance ...

Adsorption of reactive blue BF-5G dye by soybean hulls: kinetics, equilibrium and influencing factors.

Science.gov (United States)

Honorio, Jacqueline Ferandin; Veit, Márcia Teresinha; Gonçalves, Gilberto da Cunha; de Campos, Élvio Antonio; Fagundes-Klen, Márcia Regina

2016-01-01

The textile industry is known for the high use of chemicals, such as dyes, and large volumes of effluent that contaminate waters, a fact that has encouraged research and improved treatment techniques. In this study, we used unprocessed soybean hulls for the removal of reactive blue BF-5G dye. The point of zero charge of soybean hulls was 6.76. Regarding the speed of agitation in the adsorption process, the resistance to mass transfer that occurs in the boundary layer was eliminated at 100 rpm. Kinetics showed an experimental amount of dye adsorbed at equilibrium of 57.473 mg g(-1) obtained under the following conditions: dye initial concentration = 400 mg L(-1); diameter of particle = 0.725 mm; dosage = 6 g L(-1); pH 2; 100 rpm; temperature = 30 °C; and duration of 24 hours. The pseudo-second order best showed the dye removal kinetics. The adsorption isotherms performed at different temperatures (20, 30, 40 and 50 °C) showed little variation in the concentration range assessed, being properly adjusted by the Langmuir isotherm model. The maximum capacity of dye adsorption was 72.427 mg g(-1) at 30 °C. Since soybean hull is a low-cost industrial byproduct, it proved to be a potential adsorbent for the removal of the textile dye assessed.

Fabrication and characterization of mixed dye: Natural and synthetic organic dye

Science.gov (United States)

Richhariya, Geetam; Kumar, Anil

2018-05-01

Mixed dye from hibiscus sabdariffa and eosin Y was employed in the fabrication of dye sensitized solar cell (DSSC). Nanostructured mesoporous film was prepared from the titanium dioxide (TiO2). The energy conversion efficiency of hibiscus, eosin Y and mixed dye was obtained as 0.41%, 1.53% and 2.02% respectively. Mixed DSSC has shown improvement in the performance of the cell as compared to hibiscus and eosin Y dye due to addition of synthetic organic dye. This illustrates the effect of synthetic organic dyes in performance enhancement of natural dyes. It has been credited to the improved absorption of light mainly in higher energy state (λ = 440-560 nm) when two dyes were employed simultaneously as was obvious from the absorption spectra of dyes adsorbed onto TiO2 electrode. The cell with TiO2 electrode sensitized by mixed dye gives short circuit current density (Jsc) = 4.01 mA/cm2, open circuit voltage (Voc) = 0.67 V, fill factor (FF) = 0.60 and energy conversion efficiency (η) of 2.02%.

Selection of workers and firm heterogeneity

NARCIS (Netherlands)

G.W.J. Hendrikse (George)

1992-01-01

textabstractA model based on differences between workers regarding their preferences for wage and leisure drives the heterogeneity of firms result. The more industrious workers are driven to small firms due to free riding in large firms. An industry consisting of small and large firms turns out to

[Safety and health in workers employed in industry. Data from Industrial Accidents Compensation Board (INAIL) and National Social Security Institute (INPS), Veneto Region, 1994-2002].

Science.gov (United States)

Mastrangelo, G; Carassai, Patrizia; Carletti, Claudia; Cattani, F; De Zorzi, Lia; Di Loreto, G; Dini, M; Mattioni, G; Mundo, Antonietta; Noceta, R; Ortolani, G; Piccioni, M; Sartori, Angela; Sereno, Antonella; Priolo, G; Scoizzato, L; Marangi, G; Marchiori, L

2008-01-01

A decreasing time trend for occupational injuries and sickness absence would be the effect of the new legislation (D.Lgs. 626/94 and successive laws) on prevention in occupational settings. Conversely, the reduction of INPS disability would reflect a health improvement due to non-occupational causes. The aim of the study was to investigate the efficacy of the new legislation among employees in industry (where the law was mainly applied), via the time trend of three standardized rates in the Veneto Region. The numerator for the rate of occupational accidents (cases occurring in industry workers in the Veneto Region, broken down for sex, age and calendar years) was supplied by INAIL. The denominator for the above rate, as well as numerators and denominators for disability and sickness absence were supplied by INPS. Data were available from 1994 to 2002 for accidents and disability, and from 1997 to 2002 for sickness absence. In every year from 1994 to 2002, the rates were standardized for age and sex with the direct method, using an internal "standard" population. The time trend of year-specific standardized rates was analyzed by Joinpoint regression software. Among industrial workers in the Veneto Region, occupational accidents increased by 0.4% yearly, while disability decreased by 2.56% from 1994 to 2002. Sick absence increased up to 1999, then decreased. This epidemiological pattern is difficult to explain. The increase in accidents could be due to the increase of non-European Union workers and/or to the fact that accidents on the way to or from work were recognized as occupational accidents by INAIL starting from 2000. Both these phenomena could have contributed to increase the rate that was otherwise diminishing. On the other hand, this same situation could be due to insufficient efficacy of the legislation (D.Lgs. 626/94 and successive laws) for preventing occupational accidents and diseases.

Concentrations and size distribution of inhalable and respirable dust among sugar industry workers: a pilot study in Khon Kaen, Thailand.

Science.gov (United States)

Sakunkoo, Pornpun; Chaiear, Naesinee; Chaikittiporn, Chalermchai; Sadhra, Steven

2011-11-01

There has been very limited information regarding bagasse exposure among workers in sugar industries as well as on health outcomes. The authors determined the occupational exposure of sugar industry workers in Khon Kaen to airborne bagasse dust. The size of the bagasse dust ranged from 0.08 to 9 µm with the highest size concentration of 2.1 to 4.7 µm. The most common size had a geometric mean diameter of 5.2 µm, with a mass concentration of 6.89 mg/m(3)/log µm. The highest mean values of inhalable and respirable dust were found to be 9.29 mg/m(3) from February to April in bagasse storage, 5.12 mg/m(3) from May to September, and 4.12 mg/m(3) from October to January. Inhalable dust concentrations were 0.33, 0.47, and 0.41 mg/m(3), respectively. Workers are likely to be exposed to high concentrations of bagasse dust and are at risk of respiratory diseases. Preventive measures, both in the form of engineering designs and personal protective devices, should be implemented.

Removal of Triphenylmethane Dyes by Bacterial Consortium

Directory of Open Access Journals (Sweden)

Jihane Cheriaa

2012-01-01

Full Text Available A new consortium of four bacterial isolates (Agrobacterium radiobacter; Bacillus spp.; Sphingomonas paucimobilis, and Aeromonas hydrophila-(CM-4 was used to degrade and to decolorize triphenylmethane dyes. All bacteria were isolated from activated sludge extracted from a wastewater treatment station of a dyeing industry plant. Individual bacterial isolates exhibited a remarkable color-removal capability against crystal violet (50 mg/L and malachite green (50 mg/L dyes within 24 h. Interestingly, the microbial consortium CM-4 shows a high decolorizing percentage for crystal violet and malachite green, respectively, 91% and 99% within 2 h. The rate of chemical oxygen demand (COD removal increases after 24 h, reaching 61.5% and 84.2% for crystal violet and malachite green, respectively. UV-Visible absorption spectra, FTIR analysis and the inspection of bacterial cells growth indicated that color removal by the CM-4 was due to biodegradation. Evaluation of mutagenicity by using Salmonella typhimurium test strains, TA98 and TA100 studies revealed that the degradation of crystal violet and malachite green by CM-4 did not lead to mutagenic products. Altogether, these results demonstrated the usefulness of the bacterial consortium in the treatment of the textile dyes.

Occupational exposure and health problems in small-scale industry workers in Dar es Salaam, Tanzania: a situation analysis.

NARCIS (Netherlands)

Rongo, L.M.B.; Barten, F.J.M.H.; Msamanga, G.I.; Heederik, D.; Dolmans, W.M.V.

2004-01-01

BACKGROUND: Workers in informal small-scale industries (SSI) in developing countries involved in welding, spray painting, woodwork and metalwork are exposed to various hazards with consequent risk to health. Aim To assess occupational exposure and health problems in SSI in Dar es Salaam, Tanzania.

Clinical, Toxicological, Biochemical, and Hematologic Parameters in Lead Exposed Workers of a Car Battery Industry

OpenAIRE

Kianoush, Sina; Balali-Mood, Mahdi; Mousavi, Seyed Reza; Shakeri, Mohammad Taghi; Dadpour, Bita; Moradi, Valiollah; Sadeghi, Mahmoud

2013-01-01

Background: Lead is a toxic element which causes acute, subacute or chronic poisoning through environmental and occupational exposure. The aim of this study was to investigate clinical and laboratory abnormalities of chronic lead poisoning among workers of a car battery industry. Methods: Questionnaires and forms were designed and used to record demographic data, past medical histories and clinical manifestations of lead poisoning. Blood samples were taken to determine biochemical (using Auto...

What makes pregnant workers sick: why, when, where and how? An exploratory study in the ready-made garment industry in Bangladesh.

Science.gov (United States)

Akhter, Sadika; Rutherford, Shannon; Chu, Cordia

2017-10-30

Bangladesh has made significant progress in reducing maternal mortality. Many factors have contributed to this; one is the socio-economic development of the country. The ready-made garment industry is at the forefront of this development creating employment for many women. However, the work environment has the potential to create health problems, particularly for vulnerable groups such as pregnant women. This paper explores perceptions of health problems during pregnancy of factory workers, in this important industry in Bangladesh. This study was conducted in four factories using qualitative research methods to provide a view of pregnant workers' health risks beyond a bio-medical approach. Data was collected through in-depth interviews of pregnant workers and observations of their homes and workplaces. Further, key informant interviews with factory health care providers, government officials and employers revealed different perspectives and experiences. Data was collected in the local language (Bengali), then transcribed and analysed using a framework analysis approach. Female workers reported that participation in paid work created an opportunity for them to earn money but pregnancy and the nature of the job, including being pressured to meet the production quota, pressure to leave the job because of their pregnancy and withholding of maternity benefits, cause stress, anxiety and may contribute to hypertensive disorders of pregnancy. This was confirmed by factory doctors who suggested that developing hypertensive disorders during pregnancy was influenced by the nature of work and stress. The employers seemed focused on profit and meeting quotas and the health of pregnant workers appeared to be a lower priority. This study found that the government lacks the resources to understand the extent of the problem or the level of compliance with maternity related regulations. These results indicate the vulnerability of female workers to physical and mental stress at work

Treatment of wastewater dyeing agent by photocatalytic process in solar reactor

OpenAIRE

Zahraa, O.; Maire, S.; Evenou, F.; Hachem, C.; Pons, M. N.; Alinsafi, A.; Bouchy, M.

2006-01-01

The photocatalytic decolorization of industrial textile dyes has been studied. The treatment was carried out on a solar reactor consisting in a flat active plane, tilted so as to face the sun and to allow the trickling of the water to be treated. Alternatively the reactor could be irradiated by an artificial source. After checking the system using salicylic acid, a conventional model molecule, the photocatalytic decolorization of Orange II, Yellow Drimarene, and Black Drimarene dyes was inves...

Dye solar cell research

CSIR Research Space (South Africa)

Cummings, F

2009-11-01

Full Text Available Cummings Energy and Processes Materials Science and Manufacturing Council for Scientific and Industrial Research P.O. Box 395 Pretoria 0001, South Africa 27 November 2009 CONTENT head2rightBackground head2rightCSIR Dye Solar Cell Research head2... rightCollaborations and Links © CSIR 2007 www.csir.co.za head2rightAcknowledgements BACKGROUND head2rightSA is dry: Annual rainfall average of 450 mm compared with a world average of 860 mm head2rightOn upside, we have some...

A health and safety survey of Irish funeral industry workers.

LENUS (Irish Health Repository)

Kelly, N

2012-02-01

BACKGROUND: Those handling deceased individuals, including the funeral industry, face a variety of health and safety hazards including occupationally acquired infectious disease. AIMS: To identify the knowledge, attitudes and beliefs of Irish funeral industry workers towards occupational hazards and infectious disease in 2009. METHODS: The sample analysed consisted of all listed member premises of the Irish Association of Funeral Directors as at 1 July 2009. A postal survey was sent to each premises in July 2009, with two rounds of follow-up reviews sent to non-responders. Four main areas were covered--occupational hazards, embalming, industry expertise and demographics. The quantitative and qualitative results were analysed to assess knowledge, attitudes and beliefs. Data collection was completed on 31 December 2009. RESULTS: Two hundred and thirty listed member premises were contacted. Twenty-two were unsuitable for the survey. One hundred and thirty-eight valid replies were received from 130 premises, representing a premises response rate of 63% (130\\/208). Seventy-three premises (56%) identified themselves as embalmers. Embalmers had variable vaccine uptake and variable knowledge, attitude and beliefs towards embalming those with blood-borne viruses. Fifteen per cent of respondents reported a work-related injury, back injury being the most common. Splash and sharps injuries were reported as a work-related injury, and infections believed to be work related were also reported. CONCLUSIONS: This study demonstrates widespread occupational health concerns among this professional group. It confirms the need for occupational health advice and services. There is also a strong desire for regulation of this profession in Ireland.

[Burnout and the quality of life of workers in food industry--a pilot study in Serbia].

Science.gov (United States)

Arandjelović, Mirjana; Ilić, Ivana; Jović, Sladjana

2010-09-01

Burnout syndrome as a consequence of a long stress at workplace can seriously disturb health and quality of life in exposed workers. It is necessary to have adequate burnout prevention and its detection. Worldwide much attention is paid to protect burnout and methods for its determination constantly improve. In Serbia there has not been a study of that kind yet. The aim of the study was to investigate burnout syndrome impact on the quality of life of workers in food industry in Nis, and to call attention of researchers in Serbia on this phenomenon, as well as to test probability of applying the original, standardized questionnaires (CBI, ComQolA5) to working population in Serbia. This study was performed in Nis within a period from 2008 to 2009 in the Institute for Workers Health Protection. A total of 489 workers were included in this study by the use of the standard questionnaire for burnout (CBI) and quality of life (ComQoL-A5). Scale confidence for measuring burnout and quality of life was determined by Cronbach alpha coefficient. ANOVA analysis was used for rating influence of burnout on the quality of life. The values of Cronbach alpha coefficient showed a high confidence of the scale for measurement personal burnout (0.87), work-related burnout (0.86) and subjective quality of life (0.83). We detected increased scores as a result of personal burnout (60.0), as well as of work-related burnout (67.9). The workers suggested relationship with the family and friends as a very important part for their quality of life (10.8), health (9.8) and safety (8.0). Productivity (6.8), emotional well-being (6.6) and material property (4.5) had smaller influence on their quality of life. An increase in score of work-related burnout by 1 was statistically significantly related to decreasing inter scores for subjective quality of life in health (B = -0.097), relationship with family and friends (B = -0.048), safety (B = -0.061) and place in community (B = -0.105). A

Treatment of dyeing wastewater including reactive dyes (Reactive ...

African Journals Online (AJOL)

Fungal growth was not observed at pH 2. Maximum fungal decolourisation ocurred at pH 3 for anionic reactive dyes (RR, RBB, RB) and pH 6 for cationic MB dye. The fungal dye bioremoval was associated with the surface charge of the fungus due to electrostatic interactions. Growing R. arrhizus strain decolourised 100% of ...

A new technology for harnessing the dye polluted water and dye collection in the chemical factory

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

A new technology for harnessing the dye polluted water and dyecollection was developed. It is based on the enhanced evaporation by using solar, wind, and air temperature energy and additional heat-electric energy. It consists of four parts: (1) evaporation carrier system (evaporation carrier and frame for evaporation carrier) for polluted water; (2) polluted water circulating system (pumping-spraying-collecting); (3) heating system; (4) workshop with polluted water reservoir-tanks and rainfall prevention roof. The polluted water was (heated in case necessary) sprayed to the evaporation carrier system and the water was evaporated when it moved in the space and downward along the carrier mainly by using natural (solar, wind, and air temperature energy). In case, when there is no roof for the carrier system, thepolluted water can be stored in the reservoirs (storage volume for about 20 days). The first 10-25 mm rainfall also need to be stored in the reservoirs to meet the state standard for discharging wastewater. The dye may be collected at the surface in the reservoir-tanks and the crystallized salt may be collected at the bottom plate. The black-color wastewater released by the factory is no more discharged to the surface water system of Taihu Lake Basin. About 2 kg dye and 200 kg industrial salt may be collected from each tone of the polluted water. The non-pollution production of dye may be realized by using this technology with environmental, economical and social benefits.

Impact of the number of painful stimuli on life satisfaction among Korean industrial accident workers completing convalescence: dual mediating effects of self-esteem and sleeping time.

Science.gov (United States)

Choi, Wan-Suk; Kim, Bo-Kyung; Kim, Ki-Do; Moon, Ok-Kon; Yeum, Dong-Moon

2016-10-08

This study examined the impact of the number of painful stimuli on life satisfaction among workers who experienced an industrial accident and investigated how self-esteem and sleeping time affected life satisfaction. The Korea Workers' Compensation & Welfare Service conducted the first nationwide panel survey on occupational health and safety insurance in 2013-2014 through a stratified systematic sampling on 2,000 industrial accident workers who completed convalescence. Based on the dataset, our study analyzed 1,832 workers experiencing an industrial accident after excluding 168 disease patients. For the research model analysis, a four-stage hierarchical regression analysis technique was applied using the SPSS regression analysis Macro program of PROCESS Procedure. To test mediated indirect effects of the self-esteem and sleeping time, the bootstrapping technique was applied. Life satisfaction, self-esteem and sleeping time decreased as the number of painful stimuli increased. Life satisfaction decreased as self-esteem and sleeping time decreased. On balance, the partial mediation model confirmed that self-esteem and sleeping time both mediate the impact of the number of painful stimuli on life satisfaction.

Older Workers' Communication Satisfaction in the Lodging Industry.

Science.gov (United States)

Fu, Yao-Yi; Mount, Daniel J.

2002-01-01

Usable responses from 374 hotel employees compared the satisfaction with workplace communications of younger (n=80) and older workers (n=81). Differences in terms of downward and vertical communication, corporate information, communication climate, feedback, and coworker communication suggest different ways to manage workers. (Contains 33…

Intoxicated workers: findings from a national Australian survey.

Science.gov (United States)

Pidd, Ken; Roche, Ann M; Buisman-Pijlman, Femke

2011-09-01

To identify prevalence of alcohol and drug use and intoxication at work. A total of 9,828 Australian workers ≥14 years old. Australia 2007. Work-place alcohol use and drug use, intoxication at work, industry and occupation of employment. Secondary analysis of a large nationally representative survey involving descriptive and weighted multivariate logistic regressions. Differential patterns were identified by drug type, worker characteristics and occupational setting, controlling for demographic variables. Nearly 9% of workers surveyed (8.7%) usually drank alcohol at work and 0.9% usually used drugs at work. Attending work under the influence of alcohol was more prevalent (5.6%) than attending work under the influence of drugs (2.0%), and significantly more likely among young, male, never married workers with no dependent children. Hospitality industry workers were 3.5 times more likely than other workers to drink alcohol and two to three times more likely to use drugs at work or attend work under the influence of alcohol or drugs. Other high-risk industries and occupations included construction, financial services, tradespersons and unskilled workers. More than one in 20 Australian workers admit to having worked under the influence of alcohol and almost one in 50 report attending work under the influence of psychoactive drugs. The rates are higher for some industries, such as the hospitality industry, than others. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

Science.gov (United States)

Finlay, William

1987-01-01

Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

Electron beam irradiation and zeolites adsorption applied to dyeing effluents

International Nuclear Information System (INIS)

Higa, Marcela C.; Fungaro, Denise A.; Somessari, Elizabeth S.R.; Magdalena, Carina P.; Grosche, Lucas C.; NNeto, Antonio C.; Borrely, Sueli I.

2007-01-01

Wastewater generated from the textile industries contain large amount of azo dyes and many of them present low biodegradability capability. Today several countries are facing with evidences that water pollution is related to toxicity, mutagenicity and carcinogenic nature. Once reactive dyes are commercial products they will be discharged to the waterways and rivers causing ecological damages and health problems. The aim of this paper was to consider the potential of two techniques for colour and toxicity removal: ionizing radiation and adsorption by zeolites synthesized from fly ash. Real effluents from chemical and textile industries (hardly coloured) were submitted to radiation and adsorption using zeolites. It was necessary to dilute some effluents prior the treatments in order to get any success. When electrons irradiation was performed radiation doses applied were from 0.5 kGy up to 20 kGy. This radiation process accounted for a partial decolouring as higher doses were implemented. Coal fly ashes were used as starting material for zeolite synthesis by means of hydrothermal treatment with alkaline medium. The adsorption was performed by batch experiments. It was obtained about 77% - 90% color removal from dye wastewater after 24h of contact time with two types of zeolite. The irradiation accounted for 72% of the initial toxicity. The ionizing radiation and adsorption by zeolites synthesized from fly ash can be used as an alternative for the treatment of aqueous waste containing dyes. (author)

Application of electron beam to industrial wastewater treatment

International Nuclear Information System (INIS)

Han, B.; Kim, D.K.; Boo, J.Y.; Kim, J.K.; Kim, Y.; Chung, W.; Choi, J.S.; Kang, H.J.; Pikaev, A.K.

2001-01-01

Global withdrawals of water to satisfy human demands have grown dramatically in this century. Between 1900 and 1995, water consumption increased by over six times, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industrial uses, and the increasing use per capita for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water efficient technologies including economical treatment methods of wastewater and polluted water. In the Central Research Institute of Samsung Heavy Industries (SHI), many industrial wastewater including leachate from landfill area, wastewater from papermill, dyeing complex, petrochemical processes, etc. are under investigation with EB irradiation. For the study of treating dyeing wastewater combined with conventional facilities, an EB pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater has been constructed and operated in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from Papermill Company is also designed for S-paper Co. in Cheongwon City, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process. (author)

The relationship between job satisfaction and general health in workers and workplace accidents in medium-scale industries

Directory of Open Access Journals (Sweden)

Mohammad Khandan

2015-09-01

Full Text Available Background & objective: Job satisfaction and high levels of general health in workers can lead to their better performance, the reduction of workplace accidents and ultimately the improved productivity of the organization. The present study was therefore conducted to assess the relationship between these variables and the incidence of workplace accidents in medium-scale industries in 2014-15. Methods: : The entire population of workers in three medium-scale industries (n=163 entered the study. Data collection was conducted using Goldberg’s General Health Questionnaire, the Minnesota Satisfaction Questionnaire and a demographic questionnaire containing items on age, gender and the number of workplace accidents. The data obtained were then analyzed in SPSS-20 using the multiple-linear and the Poisson regression models. Results: The general health scores obtained by the participants ranged from 4 to 68 and had a mean and standard deviation of 25.87±13.085. The job satisfaction scores obtained ranged from 31 to 100 and had a mean and standard deviation of 63.45±11.462. The Poisson regression model showed that the level of education, age, physical symptoms and anxiety and insomnia had a significant relationship with the rate of accidents (P<0.05. The model also showed a significant relationship between job satisfaction and general health ( =-0.417 and P =0.001. Conclusion: The general health of the study participants can be said to be unacceptable and their job satisfaction to be medium. Devising plans for controlling and improving psychological and psycho-social factors such as job satisfaction is essential for workplace decision-makers, particularly in small and medium-scale industries. These plans can facilitate the achievement of higher health and safety levels in workers.

Implementation of a biotechnological process for vat dyeing with woad.

Science.gov (United States)

Osimani, Andrea; Aquilanti, Lucia; Baldini, Gessica; Silvestri, Gloria; Butta, Alessandro; Clementi, Francesca

2012-09-01

The traditional process for vat dyeing with woad (Isatis tinctoria L.) basically relies on microbial reduction of indigo to its soluble form, leucoindigo, through a complex fermentative process. In the 19th century, cultivation of woad went into decline and use of synthetic indigo dye and chemical reduction agents was established, with a consequent negative impact on the environment due to the release of polluting wastewaters by the synthetic dyeing industry. Recently, the ever-growing demand for environmentally friendly dyeing technologies has led to renewed interest in ecological textile traditions. In this context, this study aims at developing an environmentally friendly biotechnological process for vat dyeing with woad to replace use of polluting chemical reduction agents. Two simple broth media, containing yeast extract or corn steep liquor (CSL), were comparatively evaluated for their capacity to sustain the growth and reducing activity of the strain Clostridium isatidis DSM 15098(T). Subsequently, the dyeing capacity of the CSL medium added with 140 g L⁻¹ of woad powder, providing 2.4 g L⁻¹ of indigo dye, was evaluated after fermentation in laboratory bioreactors under anaerobic or microaerophilic conditions. In all fermentations, a sufficiently negative oxidation/reduction potential for reduction of indigo was reached as early as 24 h and maintained up to the end of the monitoring period. However, clearly faster indigo dye reduction was seen in the broth cultures fermented under strict anaerobiosis, thus suggesting the suitability of the N₂ flushing strategy for enhancement of bacterial-driven indigo reduction.

Decolorization of Remazol Black-B azo dye in soil by fungi

Directory of Open Access Journals (Sweden)

Azeem Khalid*, Sadia Batool, Muhammad Tariq Siddique, Zilli Huma Nazli, Riffat Bibi, Shahid Mahmood and Muhammad Arshad

2011-04-01

Full Text Available Textile industry is known to release huge amount of dyes in the water and soil environments during the dyeingprocess. The present study was planned with the aim to remove azo dye toxicants from the soil using fungal strains.The fungi were isolated by using Remazol Black-B azo dye as the sole source of C and N. Ten isolates were initiallyselected for testing their decolorization potential in the liquid medium. Three most effective strains were used tostudy the decolorization of Remazol Black-B in soil. The strain S4 was found to be very effective in removing thedye Remazol Black-B from liquid medium as well as in soil suspension. More than 95% decolorization by the strainS4 was observed in soil under optimal incubation conditions. Overall, the dye decolorization was maximum at 100mg dye kg-1 soil at pH 7-8 under static conditions. Glucose, moisture and aeration also affected the decolorizationefficacy of the fungal strain in soil. This study implies that fungi could be used for bioremediation of dyecontaminatedsites.

Theoretical study of indoline dyes for dye-sensitized solar cells

International Nuclear Information System (INIS)

Ham, Ho Wan; Kim, Young Sik

2010-01-01

Indoline dye sensitizers were designed and studied theoretically to increase molar extinction coefficients in the visible to near infrared region for solar-cell devices. To gain insight into dye sensitizers' structural, electronic, and optical properties, DFT/TDDFT calculations were performed on a series of dye sensitizers derived from the D149. The good agreement between the experimental and TDDFT calculated absorption spectra of the D149 sensitizer allowed us to provide a detailed assessment of the main spectral features of a series of dye sensitizers. Increase in the conjugation length resulted in a more red-shifted spectral response and less positive oxidation potential than that of the D149. The dye with the dimethylfluorene group showed stronger absorption bands due to a large dipole moment. The calculated dipoles for the dye series correlate well with the observed strong absorption bands of the electronic spectra. These results provided useful clues for the molecular engineering of efficient organic dye sensitizers.

Application of low-cost adsorbents for dye removal--a review.

Science.gov (United States)

Gupta, V K; Suhas

2009-06-01

Dyes are an important class of pollutants, and can even be identified by the human eye. Disposal of dyes in precious water resources must be avoided, however, and for that various treatment technologies are in use. Among various methods adsorption occupies a prominent place in dye removal. The growing demand for efficient and low-cost treatment methods and the importance of adsorption has given rise to low-cost alternative adsorbents (LCAs). This review highlights and provides an overview of these LCAs comprising natural, industrial as well as synthetic materials/wastes and their application for dyes removal. In addition, various other methods used for dye removal from water and wastewater are also complied in brief. From a comprehensive literature review, it was found that some LCAs, in addition to having wide availability, have fast kinetics and appreciable adsorption capacities too. Advantages and disadvantages of adsorbents, favourable conditions for particular adsorbate-adsorbent systems, and adsorption capacities of various low-cost adsorbents and commercial activated carbons as available in the literature are presented. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.

Adsorptive removal of dye using biochar derived from residual algae after in-situ transesterification: Alternate use of waste of biodiesel industry.

Science.gov (United States)

Nautiyal, Piyushi; Subramanian, K A; Dastidar, M G

2016-11-01

The primary aim of this present study was to utilize the residual biomass (DB) of Spirulina platensis algae, left after in-situ transesterification, for biochar preparation. This is a solid waste residue of biodiesel industry. The biochar (BC) prepared was examined for its capacity to adsorb congo red dye from the aqueous solution. The results were compared with other adsorbents used in the study such as commercial activated carbon (AC), original algae biomass (AB) and DB. The results of proximate analysis of BC showed the decrease in the percentage of volatile matter and an increase in fixed carbon content compared to DB. The physico-chemical properties of BC were studied using elemental analysis, SEM, FTIR and XRD techniques. The AC and BC adsorbents showed better performance in removing 85.4% and 82.6% of dye respectively from solution compared to AB (76.6%) and DB (78.1%). The effect of initial dye concentration, adsorbent dosage and pH of solution on the adsorption phenomena was studied by conducting the batch adsorption experiments. The highest specific uptake for biochar was observed at acidic pH of 2 with 0.2 g/100 ml of adsorbent dosage and 90 mg/l of initial concentration. The equilibrium adsorption data were fitted to three isotherms, namely Langmuir, Freundlich and Temkin. Freundlich model proved to show the best suited results with value of correlation coefficient of 99.12%. Thus, the application of DB for production of biochar as potential adsorbent supports sustainability of algae biodiesel. Copyright © 2016 Elsevier Ltd. All rights reserved.

Robotics and Industrial Arts.

Science.gov (United States)

Edmison, Glenn A.; And Others

Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

[The status of occupational health of female migrant workers in traditional Chinese medicine, western medicine and bio-pharmaceutical industry in Gansu province].

Science.gov (United States)

Liao, Ping-Tai; Kou, Zhen-Xia; Li, Zhi-Lan; He, Yu-Hong; Yu, Wen-Lan; Zho, An-Shou

2011-09-01

To understand the status of occupational health of female migrant workers in different kinds of pharmaceutical industries in Gansu province and to provide the basis for improving occupational health condition. One thousand eight hundreds and one female workers from 16 enterprises were selected by cluster sampling in Gansu province and investigated by interviewing and questionnaires. There were statistical significances of education level, status of residency registrations, employment relationship and occupational hazards among female workers in three types of enterprises (P < 0.05 or P < 0.01). The morbidities of skin disease in female workers for three kinds of enterprises were 4.46%, 2.53% and 3.70%, respectively. The morbidities of reproductive system disease in female workers for three kinds of enterprises were 48.57%, 36.70% and 36.11%, respectively. The levels of education and working conditions of female workers in the traditional Chinese medicine, western medicine plants are low. There are more severe occupational hazards in female workers of the traditional Chinese medicine plants.

Biochemical study of some environmental pollutants dyes Part II: disperse dyes

International Nuclear Information System (INIS)

Shakra, S.; Ahmed, F.A.; Fetyan, N.A.

2005-01-01

This work was aimed to develop a method for removal of the dyes color from the textile wastewater that is well be much less costly than the other chemical or physical methods used. It therefore included: 1. Preparation of three disperses dyes. 2. Isolation of dyes degradable microorganisms from wastewater effluents and soil after adding 200 ppm of each dye individually. 3. Decolorisation and biodegradation of the dyes in liquid culture of the isolated bacteria (Bacillus thuringiensis). 4. Identification of the probable byproducts by different instruments. 5. Toxicity assessment of the dyes and their biodegraded products

Estimating number of workers potentially at risk of exposure to hardwood dust in certain industrial sectors in Italy using a national register.

Science.gov (United States)

Scarselli, Alberto; Di Marzio, Davide

2014-11-24

Hardwood dust is a well-known human carcinogen and its use is common in several economic activities. The aim of this study was to assess the extent of occupational exposure to hardwood dust in certain sectors of Italian industry. Information on occupational exposures was collected from enterprise exposure registers that must by law be reported to the National Workers' Compensation Authority, as at 31 December 2011. Data stored in the database included economic activity sector, work force size and exposed workers. The number of workers potentially exposed was estimated for some of the industrial sectors from national occupational statistics in Italy. The economic sector with the highest number of potentially exposed workers to hardwood dust was that classified as the manufacture of other wooden furniture with 15,760 men and 2,771 women, while the highest percentage of enterprises that had sent data (according to the ISTAT 2001 census) was in building and repair of non-metallic ships (21%). The systematic recording of occupational exposures is a source of data that permits recognition of high risk situations and aids exposure assessment for epidemiological studies.

Effective decolorization and adsorption of contaminant from industrial dye effluents using spherical surfaced magnetic (Fe{sub 3}O{sub 4}) nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Suriyaprabha, R., E-mail: sooriyarajendran@gmail.com; Khan, Samreen Heena [Centre for Nanosciences, Central University of Gujarat, Gandhainagar-382030 (India); Pathak, Bhawana; Fulekar, M. H., E-mail: mhfulekar@yahoo.com [School of Environment and Sustainable Development, Central University of Gujarat, Gandhainagar-382030 (India)

2016-04-13

Treatment of highly concentrated Industrial dye stuff effluents released in the environment is the major issue faced in the era of waste management as well as in water pollution. Though there is availability of conventional techniques in large numbers, there is a need of efficient and effective advance technologies. In account of that, Nanotechnology plays a prominent role to treat the heavy metals, organic and inorganic contaminants using smart materials in nano regime (1 -100 nm). Among these nanomaterials like Iron Oxide (Fe{sub 3}O{sub 4}, magnetic nanoparticle) is one of the most promising candidates to remove the heavy metals from the industrial effluent. Fe{sub 3}O{sub 4} is the widely used smart material with magnetic property having high surface area; high surface to volume ratio provides more surface for the chemical reaction for the surface adsorption. Fe{sub 3}O{sub 4} nanoparticles have been synthesized using sonochemical method using ultra frequency in aqueous solution under optimized conditions. The as-synthesized nanoparticle was analyzed using different characterization tool. The Transmission Electron microscope (TEM) images revealed 10-12 nm spherical shape nanoparticles; crystal phase and surface morphology was confirmed by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), respectively. The functional group were identified by Fourier Transform-Infra Red Spectroscopy (FT-IR), revealed the bending and stretching vibrations associated with Iron Oxide nanoparticle. In present study, for the efficient removal of contaminants, different concentration (10-50 ppm) of dye stuff effluent has been prepared and subjected to adsorption and decolourization at definite time intervals with Fe{sub 3}O{sub 4} nanoparticles. The concentration of Iron oxide and the time (45 mins) was kept fixed for the reaction whereas the concentration of dye stuff effluent was kept varying. It was found that the spherical shaped Fe{sub 3}O{sub 4} proved to be

Dye Sensitized Solar Cells

Directory of Open Access Journals (Sweden)

Di Wei

2010-03-01

Full Text Available Dye sensitized solar cell (DSSC is the only solar cell that can offer both the flexibility and transparency. Its efficiency is comparable to amorphous silicon solar cells but with a much lower cost. This review not only covers the fundamentals of DSSC but also the related cutting-edge research and its development for industrial applications. Most recent research topics on DSSC, for example, applications of nanostructured TiO2, ZnO electrodes, ionic liquid electrolytes, carbon nanotubes, graphene and solid state DSSC have all been included and discussed.

Effect of exposure to a mixture of organic solvents on hearing thresholds in petrochemical industry workers.

Science.gov (United States)

Loukzadeh, Ziba; Shojaoddiny-Ardekani, Ahmad; Mehrparvar, Amir Houshang; Yazdi, Zohreh; Mollasadeghi, Abolfazl

2014-10-01

Hearing loss is one of the most common occupational diseases. In most workplaces, workers are exposed to noise and solvents simultaneously, so the potential risk of hearing loss due to solvents may be attributed to noise. In this study we aimed to assess the effect of exposure to mixed aromatic solvents on hearing in the absence of exposure to hazardous noise. In a cross-sectional study, 99 workers from the petrochemical industry with exposure to a mixture of organic solvents whose noise exposure was lower than 85 dBA were compared with 100 un-exposed controls. After measuring sound pressure level and mean concentration of each solvent in the workplace, pure-tone-audiometry was performed and the two groups were compared in terms of high-frequency and low-frequency hearing loss. T-tests and Chi-square tests were used to compare the two groups. The mean hearing threshold at all frequencies among petrochemical workers was normal (below 25 dB). We did not observe any significant association between solvent exposure and high-frequency or low-frequency hearing loss. This study showed that temporary exposure (less than 4 years) to a mixture of organic solvents, without exposure to noise, does not affect workers' hearing threshold in audiometry tests.

Dye and its removal from aqueous solution by adsorption: a review.

Science.gov (United States)

Yagub, Mustafa T; Sen, Tushar Kanti; Afroze, Sharmeen; Ang, H M

2014-07-01

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed. Copyright © 2014 Elsevier B.V. All rights reserved.

Recent advancements in bioremediation of dye: Current status and challenges.

Science.gov (United States)

Vikrant, Kumar; Giri, Balendu Shekhar; Raza, Nadeem; Roy, Kangkan; Kim, Ki-Hyun; Rai, Birendra Nath; Singh, Ram Sharan

2018-04-01

The rampant industrialization and unchecked growth of modern textile production facilities coupled with the lack of proper treatment facilities have proliferated the discharge of effluents enriched with toxic, baleful, and carcinogenic pollutants including dyes, heavy metals, volatile organic compounds, odorants, and other hazardous materials. Therefore, the development of cost-effective and efficient control measures against such pollution is imperative to safeguard ecosystems and natural resources. In this regard, recent advances in biotechnology and microbiology have propelled bioremediation as a prospective alternative to traditional treatment methods. This review was organized to address bioremediation as a practical option for the treatment of dyes by evaluating its performance and typical attributes. It further highlights the current hurdles and future prospects for the abatement of dyes via biotechnology-based remediation techniques. Copyright © 2018 Elsevier Ltd. All rights reserved.

Identification of the Skills Needed by Workers in Various Segments of the Mountain States Graphic Communications Industry.

Science.gov (United States)

Dharavath, H. Naik

The skills needed now and 5 years from now by workers in the graphic communications industry in New Mexico, Colorado, and Wyoming were identified through a mail survey of mountain states printing companies. Of the 478 companies to which surveys were mailed, 64 were returned (response rate, 13.40%). A paired t-test was conducted to identify…

An analysis of workers' morale in the coal mining industry using principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J.; La Court, C.; Pearson, J.M.

1987-03-01

This paper looks at labour morale in the coal mining industry from 1967 to 1984. In particular it examines absenteeism, turnover and accidents over that period, as well as constructing an index of morale based on these variables. The data are taken from the North Nottinghamshire and South Yorkshire coal areas, and a comparison is made between these areas in the period leading up to the industrial action in 1984/85. The indices constructed indicate that morale, as measured by the first principal component, increased considerably during the years before the 1984 industrial dispute and that low morale was an unlikely reason for the dispute, although morale in South Yorkshire, a strike area, was lower than in North Nottinghamshire, largely a non-strike area. The steep rise in morale in both North Nottinghamshire and South Yorkshire follows closely the rise in unemployment nationally and may simply be an indication of conventional industrial relations assumptions that manifestations of negative worker attitudes are greatest when jobs are relatively plentiful, and considerably less so when jobs are scarce.

Estimating Sound Intensity and its Effect on the Hearing Status of the Workers in an Industrial Shoe Factory.

Directory of Open Access Journals (Sweden)

Vida Ameri

1999-03-01

Full Text Available Introduction: We estimated the noise in an industrial shoe factory to determine the effect of noise in the workplace on the hearing status of the workers in such environments.Materials and method: the intensity of noise in dB in different parts of the factory was estimated. Then working people in each part was selected randomly and their hearing thresholds were evaluated by Conventional audiometry.Results: The results demonstrated that 23% were required to estimate thresholds more precisely and 95 needed close examination by Otolaryngologist. Besides, 10% of the workers suffered sensory neural hearing loss whose 2% of them diagnosed as NIHL.Discussion: Since the mentioned factory has good hearing conservation program for the workers, it seems that promoting the program can decline the number of noise induced hearing losses to the least numbers.

The Impact of Hearing Protection Devices (HPDs on Blood Pressure in Workers Exposed to Noise: A Cross-sectional Study in a Textile Industry

Directory of Open Access Journals (Sweden)

Jafar Akbari

2018-06-01

Full Text Available Many studies have reported that exposure to workplace noise leads to increase in blood pressure. The aim of this study was to investigate the effect of hearing protection devices (HPDs including ear plug and ear muff on the systolic and diastolic blood pressures of workers exposed to workplace noise in a textile industry. A total of 120 male workers that exposed to 95 dB noise were investigated in this study. The systolic and diastolic blood pressures of the workers were measured for three situations of earplug, earmuff and earplug along earmuff applications. Data analyses were conducted through SPSS software (version 20 and statistical tests of ANOVA and Independent Sample Tests. The comparison of mean blood pressure in three situations showed that using ear muff had a significant effect on the systolic and diastolic blood pressures in the workers. Furthermore, the use of ear plug only had an effect on the systolic blood pressure. But, the application of ear muff caused to decrease in the systolic and diastolic blood pressures only in the third stage of the study. With regard to the results in this study, in order to control the blood pressure changes of the workers, it is recommended to use ear muff in the textile industry.

Synthesis, characterization and dyeing behavior of heterocyclic acid dyes and mordent acid dyes on wool and silk fabrics

Directory of Open Access Journals (Sweden)

Patel Hitendra M.

2012-01-01

Full Text Available Novel heterocyclic acid and mordent acid dyes were synthesized by the coupling of diazonium salt solution of different aromatic amines with 2- butyl-3-(4-hydroxybenzoylbenzofuran. The resulting heterocyclic acid dyes were characterized by spectral techniques, i.e., elemental analysis, IR, 1HNMR, 13C-NMR spectral studies and UV- visible spectroscopy. The dyeing performance of all the heterocyclic acid dyes was evaluated on wool and silk fabrics. The dyeing of chrome pre treated wool and silk fabrics showed better hues on mordented fabrics. Dyeing of wool and silk fabrics resulted in pinkish blue to red shades with very good depth and levelness. The dyed fabrics showed excellent to very good light, washing, perspiration, sublimation and rubbing fastness.

Dye decolorization and detoxification potential of Ca-alginate beads immobilized manganese peroxidase.

Science.gov (United States)

Bilal, Muhammad; Asgher, Muhammad

2015-12-10

In view of compliance with increasingly stringent environmental legislation, an eco-friendly treatment technology of industrial dyes and effluents is a major environmental challenge in the color industry. In present study, a promising and eco-friendly entrapment approach was adopted to immobilize purified manganese peroxidase (MnP) produced from an indigenous strain of Ganoderma lucidum IBL-05 on Ca-alginate beads. The immobilized MnP was subsequently used for enhanced decolorization and detoxification of textile reactive dyes). MnP isolated from solid-state culture of G. lucidum IBL-05, presented highest immobilization yield (83.9 %) using alginate beads prepared at optimized conditions of 4 % (w/v) sodium alginate, 2 % (w/v) Calcium chloride (CaCl2) and 0.5 mg/ml enzyme concentration. Immobilization of MnP enhanced optimum temperature but caused acidic shift in optimum pH of the enzyme. The immobilized MnP showed optimum activity at pH 4.0 and 60 °C as compared to pH 5.0 and 35 °C for free enzyme. The kinetic parameters K(m) and V(max) of MnP were significantly improved by immobilization. The enhanced catalytic potential of immobilized MnP led to 87.5 %, 82.1 %, 89.4 %, 95.7 % and 83 % decolorization of Sandal-fix Red C4BLN, Sandal-fix Turq Blue GWF, Sandal-fix Foron Blue E2BLN, Sandal-fix Black CKF and Sandal-fix Golden Yellow CRL dyes, respectively. The insolubilized MnP was reusable for 7 repeated cycles in dye color removal. Furthermore, immobilized MnP also caused a significant reduction in biochemical oxygen demand (BOD) (94.61-95.47 %), chemical oxygen demand (COD) (91.18-94.85 %), and total organic carbon (TOC) (89.58-95 %) of aqueous dye solutions. G. lucidum MnP was immobilized in Ca-alginate beads by entrapment method to improve its practical effectiveness. Ca-alginate bound MnP was catalytically more vigorous, thermo-stable, reusable and worked over wider ranges of pH and temperature as compared to its free counterpart. Results of cytotoxicity like

Work, gender roles, and health: neglected mental health issues among female workers in the ready-made garment industry in Bangladesh.

Science.gov (United States)

Akhter, Sadika; Rutherford, Shannon; Akhter Kumkum, Feroza; Bromwich, David; Anwar, Iqbal; Rahman, Aminur; Chu, Cordia

2017-01-01

Traditionally, women in Bangladesh stayed at home in their role as daughter, wife, or mother. In the 1980s, economic reforms created a job market for poor, uneducated rural women in the ready-made garment industry, mostly located in urban areas. This increased participation in paid work has changed the gender roles of these women. Women's earnings support their family, but they are also separated from their children, with impacts on their mental health and well-being. This study explores the lived experience of women in Bangladesh working in the ready-made garment industry as they strive to be mothers and family providers, often in high-stress conditions. The study was conducted in two industrial areas of Dhaka over 8 months. Data collection included a literature review, 20 in-depth interviews with married female garment workers, and 14 key-informant interviews with officials from the Ministry of Labour and Employment, health-service providers within the garment factories, factory managers, and representatives of the Bangladesh Garment Manufacturers and Exporters Association. The data collected were analyzed thematically. Poverty was a key motivating factor for female migrant workers to move from rural areas. Their children stay in their village with their grandparents, because of their mothers' work conditions and the lack of childcare. The women reported stress, anxiety, restlessness, and thoughts of suicide, due to the double burden of work and separation from their children and family support. Further, they cannot easily access government hospital services due to their long work hours, and the limited medical services provided in the workplace do not meet their needs. In order to improve the health and well-being of female garment workers, steps should be taken to develop health interventions to meet the needs of this important group of workers who are contributing significantly to the economic development of the country.

The effect of the textile industry dye bath additive EDTMPA on colour removal characteristics by ozone oxidation.

Science.gov (United States)

Olmez, T; Kabdaşli, I; Tünay, O

2007-01-01

In this study, the effects of the phosphonic acid based sequestering agent EDTMPA used in the textile dye baths on colour and organic matter removal by ozone oxidation was experimentally investigated. Procion Navy HEXL dyestuff that has been commonly used for the reactive dyeing of cellulose fibers was selected as the model component. The organic matter oxidation by ozone was determined to obey the pseudo-first order kinetics as they are treated singly or in combination. COD removal rates obtained from pseudo-first order reaction kinetics showed that oxidation of Navy HEXL alone (0.0947 L/min) was faster than that of EDTMPA (0.0171 L/min) and EDTMPA with dye (0.0155 L/min) at pH 3.0. It was also found that reaction rates of single EDTMPA removal and EDTMPA and dye mixture removal increased as the reaction pH was increased from 3.0 to 10.5.

Removal of Acid Black 194 dye from water by electrocoagulation with aluminum anode.

Science.gov (United States)

Vidal, Jorge; Villegas, Loreto; Peralta-Hernández, Juan M; Salazar González, Ricardo

2016-01-01

Application of an electrocoagulation process (EC) for the elimination of AB194 textile dye from synthetic and textile wastewater (effluent) contaminated with AB194 dye, was carried out using aluminum anodes at two different initial pH values. Tafel studies in the presence and absence of the dye were performed. The aluminum species formed during the electrolysis were quantified by atomic absorption, and the flocs formed in the process were analyzed by HPLC-MS. Complete removal of AB194 from 1.0 L of solution was achieved applying low densities current at initial pH values of 4.0 and 8.0. The removal of AB194 by EC was possible with a short electrolysis time, removing practically 100% of the total organic carbon content and chemical oxygen demand. The final result was completely discolored water lacking dye and organic matter. An effluent contaminated with 126 mg L(-1) AB194 dye from a Chilean textile industry was also treated by EC under optimized experimental conditions, yielding discolored water and considerably decreasing the presence of organic compounds (dye + dyeing additives), with very low concentrations of dissolved Al(3+). Analysis of flocs showed the presence of the original dye without changes in its chemical structure.

FACTORS RELATED TO TOOTH LOSS AMONG INDUSTRIAL WORKERS IN PHATHUM THANI, THAILAND.

Science.gov (United States)

Jaaidee, Jeerateep; Chatrchaiwiwatana, Supaporn; Ratanasiri, Amornrat

2017-01-01

Tooth loss is an important oral health problem among Thai people. The objectives of this study were to evaluate the prevalence of and factors associated with tooth loss among Thai industrial workers in order to apply preventive oral health programs to this population. The study consisted of 1,500 adults working in Nava Nakorn Industrial Estate, Pathum Thani Province, Thailand in 2014. Probability proportion to size cluster sampling was used and 16 clusters were included in the study. An oral health questionnaire was developed, evaluated for content validity by experts and then given to participants to fill out. The study population consisted of 621 males (41.4%) and 879 females (58.6%) aged between 19-25 years. The overall prevalence of tooth loss was 62.2% and the major reason for tooth loss was dental caries (60%). Results from multivariable logistic regression analysis show that factors associated with tooth loss were: having a history of scaling or tooth cleaning [adjusted odds ratio (AOR)= 2.47; 95% CI: 1.21-4.65], having dental caries with exposed pulp (AOR=4.12; 95% CI: 3.26-7.67), having tooth mobility due to periodontal disease (AOR=2.41; 95% CI: 2.71-5.22), having needed tooth restoration (AOR=1.75; 95% CI: 1.23-2.65), having a history of maxillofacial or a temporo-mandibular joint accident (AOR=2.13; 95% CI: 1.87- 3.23), wearing dentures (AOR=2.58; 95% CI: 2.17-6.72), using dental care services during the previous year (AOR=2.21; 95% CI: 1.26-4.57), eating snacks and candy daily (AOR=2.14; 95% CI: 1.82-2.92), having toothache (AOR=2.64; 95% CI: 1.43- 3.92), having dental caries (AOR=2.23; 95% CI: 1.62-3.27) and having a history of orthodontic treatment (AOR=3.61; 95% CI: 1.84-5.68). The Nagelkerke R squared for the model was 0.42. Our findings suggest several clinical, socio-economic and lifestyle factors are associated with tooth loss among these Thai industrial workers. An appropriate preventive oral health program targeting this high-risk group taking

Components and modifiers of the healthy worker effect: evidence from three occupational cohorts and implications for industrial compensation

International Nuclear Information System (INIS)

Howe, G.R.; Chiarelli, A.M.; Lindsay, J.P.

1988-01-01

The authors examined the components and modifiers of the healthy worker effect using mortality data from three occupational cohorts: the employees of Atomic Energy of Canada Limited followed between 1950 and 1981, a 10% sample of the Canadian labor force followed between 1965 and 1979, and workers at the Eldorado Resources Limited Beaverlodge uranium mine followed between 1950 and 1980. Two important components of the healthy worker effect have been identified in these cohorts, namely, initial selection of and continuing employment of healthy individuals. There is less evidence for a contribution from the existence of differential risk factors among employed individuals as compared with the general population. The healthy worker effect is, however, substantially modified by time since employment, sex, age, specific cause of death, and specific occupation. Because of this variation, it is inappropriate to account for the healthy worker effect by a single parameter, and all of the above factors must be taken into account in any appropriate analysis. When the only available comparison group for an occupational cohort is the general population, the healthy worker effect is unlikely to have any substantial influence on the process of assessing causality for any observed association or attributing cause in an individual case. This would be particularly true for cancer, and even more so for lung cancer, a disease often associated with industrial compensation cases

Practical approach in training (on-the-job) for workers in nuclear industries

International Nuclear Information System (INIS)

Vianna, Vilson Bedim; Rocha, Janine Gandolpho da

2005-01-01

This work approaches the 'on-the-job training' - a method of practical training - used in nuclear industries for workers who handle radioactive nuclides. The required training must, in accordance with the ISO 9000 standard, be geared to meet the needs of the organization, including the minimization of errors in operation with radionuclides, which involves various aspects (standard, social, environmental, personal and process safety etc.). Therefore, the training process must have the commitment of everybody and have a logical and documented sequence, where both the individual and the needs of the company are raised and analyzed. The clear identification of the radiological risks associated to the hands-on training is critical to the safety of who is being trained and should be part of the training content. However, the greatest challenge is a mechanism allowing to transform the hands-on training in practical learning. The role of training in the modern nuclear industry should not be restricted to provide conditions for better training or development of the employee, but also motivate the continuous improvement of the company and of the productive process

Assessment of Effectiveness of Cool Coat in Reducing Heat Strain among Workers in Steel Industry.

Science.gov (United States)

Parameswarappa, S B; Narayana, J

2017-01-01

A research study was conducted to assess the effectiveness of cool coat in reducing heat strain among workers exposed to heat in a steel plant located in south India. The study consists of assessing heat strain of workers exposed to heat in a steel plant by measuring physiological reactions of workers such as pulse rate and core body temperature with and without cool coat. The coal coat taken for this study was procured from M/s Yamuna Industries, Noida. Out of 140 employees exposed to heat hazard, 101 employees were examined in this study. Study was done in important production units in steel plant having heat hazard. Workers were interviewed and examined and information regarding thermal comfort was collected. First, the heat strain was assessed when the workers were not using cool coats. The air temperature was measured at all hot zone workplaces and found in the range of 34 0 C to 39.4 0 C (Mean: 36.54 0 C & S.D: 1.54). Physiological response such as core body temperature, pulse rate and blood pressure of workers exposed to heat hazard were measured before & after work to know the heat strain sustained by workers when they were working. Maximum core body temperature after work was found to be 39.3 0 C (Mean; 38.52 & S.D; 0.7). Maximum pulse rate of workers after work was found to be 120 beats/minute (Mean; 94.96 beats/minute, S.D: 13.11). The study indicate core body temperature of workers was found more than the permissible exposure limit prescribed by ACGIH, indicating the heat strain sustained by workers is significant, whereas the pulse rate and blood pressure was found normal & not exceeded the limits. Second, with cool coat, the heat strain was assessed among 10 workers selected from the 101 employees. Core body temperature was measured before and soon after work, The core body temperature recorded soon after work was in the range of 35.5 - 37.20C (Mean 36.36, SD= 0.52), indicating a drop in the core body temperature. In this study, a core body

Removal of Organic Dyes from Industrial Wastewaters Using UV/H2O2, UV/H2O2/Fe (II, UV/H2O2/Fe (III Processes

Directory of Open Access Journals (Sweden)

Nezamaddin Daneshvar

2007-03-01

Full Text Available UV/H2O2, UV/H2O2/Fe (II and UV/H2O2/Fe (III processes are very effective in removing pollutants from wastewater and can be used for treatment of dyestuff units wastewaters. In this study, Rhodamine B was used as a typical organic dye. Rhodamine B has found wide applications in wax, leather, and paper industries. The results from this study showed that this dye was degradable in the presence of hydrogen peroxide under UV-C irradiation (30W mercury light and Photo-Fenton process. The dye was resistant to UV irradiation. In the absence of UV irradiation, the decolorization efficiency was very negligible in the presence of hydrogen. The effects of different system variables such as initial dye concentration, duration of UV irradiation, and initial hydrogen peroxide concentration were investigated in the UV/H2O2 process. Investigation of the kinetics of the UV/H2O2 process showed that the semi-log plot of the dye concentration versus time was linear, suggesting a first order reaction. It was found that Rhodamine B decolorization efficiencies in the UV/H2O2/Fe (II and UV/H2O2/Fe (III processes were higher than that in the UV/H2O2 process. Furthermore, a solution containing 20 ppm of Rhodamine B was decolorized in the presence 18 mM of H2O2 under UV irradiation for 15 minutes. It was also found that addition of 0.1 mM Fe(II or Fe(III to the solution containing  20  ppm of the dye and 5 mM H2O2 under UV light  illumination decreased removal time to 10 min.

Accident patterns for construction-related workers: a cluster analysis

Science.gov (United States)

Liao, Chia-Wen; Tyan, Yaw-Yauan

2012-01-01

The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

Occupational dermatoses: An Asian perspective.

Science.gov (United States)

Bhatia, Riti; Sharma, Vinod Kumar

2017-01-01

Occupational dermatoses contribute to a significant portion of work-related diseases, especially in Asia, where a major portion of the workforce is in the unorganized sector. This review article is focussed on the frequency and pattern of occupational skin diseases reported across Asian countries and type of allergens implicated in different occupations. The literature was searched systematically using key words 'occupational dermatoses,' 'occupational skin disease' and name of each Asian country. Ninty five full-text articles were considered relevant and evaluated. Some of the dermatoses seen in industrial workers in Asian countries are similar to those in Western countries, including dermatoses due to chromate in construction and electroplating workers, epoxy resin, and chromate in painters, wood dust in workers in the furniture industry, azo dyes in textile workers and formaldehyde and chromates in those working in the leather and dyeing industries, dermatoses in domestic workers, chefs and health-care workers. Dermatoses in workers engaged in agriculture, beedi (tiny cigars) manufacture, agarbatti (incense sticks) production, fish processing, carpet weaving, sanitation and those working in coffee plantations and coal mines appear to be unique to Asian countries. Recognition of clinical patterns and geographic variations in occupational skin diseases will provide an impetus to further strengthen future research in these areas, as well as improving their management.

Workers Education Programme in India

Science.gov (United States)

Chansarkar, M. A.

1970-01-01

The philosophy of Workers Education in India is that strong and enlightened trade unions could be of great value in the rapid industrialization of the country. The Central Board for Workers Education has devised a number of training programs, the most important of which are training of education officers, worker-teachers training, and training…

Burnout and the quality of life of workers in food industry: A pilot study in Serbia

Directory of Open Access Journals (Sweden)

Aranđelović Mirjana

2010-01-01

Full Text Available Background/Aim. Burnout syndrome as a consequence of a long stress at workplace can seriously disturb health and quality of life in exposed workers. It is necessary to have adequate burnout prevention and its detection. Worldwide much attention is paid to protect burnout and methods for its determination constantly improve. In Serbia there has not been a study of that kind yet. The aim of the study was to investigate burnout syndrome impact on the quality of life of workers in food industry in Niš, and to call attention of researchers in Serbia on this phenomenon, as well as to test probability of applying the original, standardized questionnaires (CBI, ComQolA5 to working population in Serbia. Methods. This study was performed in Niš within a period from 2008 to 2009 in the Institute for Workers Health Protection. A total of 489 workers were included in this study by the use of the standard questionnaire for burnout (CBI and quality of life (Com- QoL-A5. Scale confidence for measuring burnout and quality of life was determined by Cronbach α coefficient. ANOVA analysis was used for rating influence of burnout on the quality of life. Results. The values of Cronbach α coefficient showed a high confidence of the scale for measurement personal burnout (0.87, work-related burnout (0.86 and subjective quality of life (0.83. We detected increased scores as a result of personal burnout (60.0, as well as of work-related burnout (67.9. The workers suggested relationship with the family and friends as a very important part for their quality of life (10.8, health (9.8 and safety (8.0. Productivity (6.8, emotional well-being (6.6 and material property (4.5 had smaller influence on their quality of life. An increase in score of work-related burnout by 1 was statistically significantly related to decreasing inter scores for subjective quality of life in health (B = -0.097, relationship with family and friends (B = - 0.048, safety (B = -0.061 and place in

Treatment of wastewater dyeing agent by photocatalytic process in solar reactor

Directory of Open Access Journals (Sweden)

O. Zahraa

2006-01-01

Full Text Available The photocatalytic decolorization of industrial textile dyes has been studied. The treatment was carried out on a solar reactor consisting in a flat active plane, tilted so as to face the sun and to allow the trickling of the water to be treated. Alternatively the reactor could be irradiated by an artificial source. After checking the system using salicylic acid, a conventional model molecule, the photocatalytic decolorization of Orange II, Yellow Drimarene, and Black Drimarene dyes was investigated. Artificial and solar irradiation gave comparable results although the heating by the sun reduced the amount of adsorption. The kinetics agrees with the Langmuir-Hinshelwood model and a discrepancy between adsorption constants deduced from the kinetic and adsorption experiments was interpreted by considering various types of adsorption sites. Orange II and Drimarene dyes decolorization kinetics are opposite limiting cases of the above model, as being of order 0 and 1 with respect to the dye, respectively.

Decolorization of a textile vat dye by adsorption on waste ash

Directory of Open Access Journals (Sweden)

MIODRAG ŠMELCEROVIĆ

2010-06-01

Full Text Available An adsorption process using cheap adsorbents could be described as a simple, selective and low cost alternative for the treatment of colored waste water compared to conventional physical and chemical processes. In this study the use of a natural waste adsorbent–ash was investigated for the removal of a textile vat dye Ostanthren blue GCD remaining after the dyeing of cotton textile. The ash obtained as a waste material during the burning of brown coal in the heating station of Leskovac (Serbia was used for the treatment of waste waters from the textile industry, i.e., waste water after the dyeing process. The effect of ash quantity, initial dye concentration, pH and agitation time on adsorption was studied. The Langmuir model was used to describe the adsorption isotherm. Based on the analytical expression of the Langmuir model, the adsorption constants, such as adsorption capacity and adsorption energy, were found. Pseudo first and second order kinetic models were studied to evaluate the kinetic data.

Effect of daily noise exposure monitoring on annual rates of hearing loss in industrial workers.

Science.gov (United States)

Rabinowitz, Peter M; Galusha, Deron; Kirsche, Sharon R; Cullen, Mark R; Slade, Martin D; Dixon-Ernst, Christine

2011-06-01

Occupational noise-induced hearing loss (NIHL) is prevalent, yet evidence on the effectiveness of preventive interventions is lacking. The effectiveness of a new technology allowing workers to monitor daily at-ear noise exposure was analysed. Workers in the hearing conservation program of an aluminium smelter were recruited because of accelerated rates of hearing loss. The intervention consisted of daily monitoring of at-ear noise exposure and regular feedback on exposures from supervisors. The annual rate of change in high frequency hearing average at 2, 3 and 4 KHz before intervention (2000-2004) and 4 years after intervention (2006-2009) was determined. Annual rates of loss were compared between 78 intervention subjects and 234 controls in other company smelters matched for age, gender and high frequency hearing threshold level in 2005. Individuals monitoring daily noise exposure experienced on average no further worsening of high frequency hearing (average rate of hearing change at 2, 3 and 4 KHz = -0.5 dB/year). Matched controls also showed decelerating hearing loss, the difference in rates between the two groups being significant (p hearing loss showed a similar trend but the difference was not statistically significant (p = 0.06). Monitoring daily occupational noise exposure inside hearing protection with ongoing administrative feedback apparently reduces the risk of occupational NIHL in industrial workers. Longer follow-up of these workers will help determine the significance of the intervention effect. Intervention studies for the prevention of NIHL need to include appropriate control groups.

Emerging epidemic in a growing industry: cigarette smoking among female micro-electronics workers in Taiwan.

Science.gov (United States)

Lin, Y-P; Yen, L-L; Pan, L-Y; Chang, P-J; Cheng, T-J

2005-03-01

To explore the emerging tobacco epidemic in female workers in the growing micro-electronics industry of Taiwan. Workers were surveyed regarding their smoking status, sociodemographics and work characteristics. In total, 1950 female employees in two large micro-electronics companies in Taiwan completed the survey. Approximately 9.3% of the female employees were occasional or daily smokers at the time of the survey. The prevalence of smoking was higher in those aged 16-19 years (20.9%), those not married (12.9%), those with a high school education or less (11.7%), those employed by Company A (11.7%), shift workers (14.3%), and those who had been in their present employment for 1 year or less (13.6%). Results of multivariate adjusted logistic regression indicated that younger age, lower level of education, shorter periods of employment with the company and shift working were the important factors in determining cigarette smoking among the study participants. The odds ratio of being a daily smoker was similar to that of being a current smoker. Marital status was the only significant variable when comparing former smokers with current smokers. Smoking prevalence in female workers in the two micro-electronics companies studied was much higher than previous reports have suggested about female smoking prevalence in Taiwan and China. We suggest that smoking is no longer a 'male problem' in Taiwan. Future smoking cessation and prevention programmes should target young working women as well as men.

Studies on Dyeing Performance of Novel Acid Azo Dyes and Mordent Acid Azo Dyes Based on 2,4-Dihydroxybenzophenone

Directory of Open Access Journals (Sweden)

Bharat C. Dixit

2009-01-01

Full Text Available Novel acid azo and mordent acid azo dyes have been prepared by the coupling of diazo solution of different aminonaphthol sulphonic acids and aromatic amino acids with 2,4-dihydroxybenzophenone. The resultant dyes were characterized by elemental analysis as well as IR and 1H NMR spectral studies. The UV-visible spectral data have also been discussed in terms of structure property relationship. The dyeing assessments of all the dyes were evaluated on wool and silk textile fibers. The dyeing of chrome pretreated wool and silk have also been monitored. The result shows that better hue was obtained on mordented fiber. Results of bactericidal studies of chrome pretreated fibers revealed that the toxicity of mordented dyes against bacteria is fairly good. Dyeing on wool and silk fibers resulted in yellowish pink to reddish brown colourations having excellent light fastness and washing fastness.

Effect of Reactive Black 5 azo dye on soil processes related to C and N cycling

Directory of Open Access Journals (Sweden)

Khadeeja Rehman

2018-05-01

Full Text Available Azo dyes are one of the largest classes of synthetic dyes being used in textile industries. It has been reported that 15–50% of these dyes find their way into wastewater that is often used for irrigation purpose in developing countries. The effect of azo dyes contamination on soil nitrogen (N has been studied previously. However, how does the azo dye contamination affect soil carbon (C cycling is unknown. Therefore, we assessed the effect of azo dye contamination (Reactive Black 5, 30 mg kg−1 dry soil, bacteria that decolorize this dye and dye + bacteria in the presence or absence of maize leaf litter on soil respiration, soil inorganic N and microbial biomass. We found that dye contamination did not induce any change in soil respiration, soil microbial biomass or soil inorganic N availability (P > 0.05. Litter evidently increased soil respiration. Our study concludes that the Reactive Black 5 azo dye (applied in low amount, i.e., 30 mg kg−1 dry soil contamination did not modify organic matter decomposition, N mineralization and microbial biomass in a silty loam soil.

Migration and Social Replacement Incomes: How to Protect Low-IncomeWorkers in the Industrialized Countries against the Forces of Globalizationand Market Integration

OpenAIRE

Sinn, Hans-Werner

2005-01-01

This paper discusses how an industrialized country could defend the wages and social benefits of its unskilled workers against wage competition from immigrants. It shows that fixing social standards harms the workers and that fixing social replacement incomes implies migration into unemployment. Defending wages with replacement incomes brings about first-order efficiency losses that outweigh the budget cost to the government. By contrast, wage subsidies involve much smaller welfare losses. Wh...

Flock worker's lung: chronic interstitial lung disease in the nylon flocking industry.

Science.gov (United States)

Kern, D G; Crausman, R S; Durand, K T; Nayer, A; Kuhn, C

1998-08-15

Two young men working at a nylon flocking plant in Rhode Island developed interstitial lung disease of unknown cause. Similar clusters at the same company's Canadian plant were reported previously. To define the extent, clinicopathologic features, and potential causes of the apparent disease outbreak. Case-finding survey and retrospective cohort study. Academic occupational medicine program. All workers employed at the Rhode Island plant on or after 15 June 1990. Symptomatic employees had chest radiography, pulmonary function tests, high-resolution computed tomography, and serologic testing. Those with unexplained radiographic or pulmonary function abnormalities underwent bronchoalveolar lavage, lung biopsy, or both. The case definition of "flock worker's lung" required histologic evidence of interstitial lung disease (or lavage evidence of lung inflammation) not explained by another condition. Eight cases of flock worker's lung were identified at the Rhode Island plant. Three cases were characterized by a high proportion of eosinophils (25% to 40%) in lavage fluid. Six of the seven patients who had biopsy had histologic findings of nonspecific interstitial pneumonia, and the seventh had bronchiolitis obliterans organizing pneumonia. All seven of these patients had peribronchovascular interstitial lymphoid nodules, usually with germinal centers, and most had lymphocytic bronchiolitis and interstitial fibrosis. All improved after leaving work. Review of the Canadian tissue specimens showed many similar histologic findings. Among the 165-member study cohort, a 48-fold or greater increase was seen in the sex-adjusted incidence rate of all interstitial lung disease. Work in the nylon flocking industry poses substantial risk for a previously unrecognized occupational interstitial lung disease. Nylon fiber is the suspected cause of this condition.

Health of radiation workers

International Nuclear Information System (INIS)

Myers, D.K.

1979-11-01

Radiation workers are healthier than the average person in the general population and appear to be as healthy as workers in other ΣsafeΣ industries. It is, however, assumed that there is no safe dose of radiation and that any exposure to radiation will cause a small increase in the incidence of cancer, this increase being directly proportional to the total radiation dose. On the basis of the risk estimates given by ICRP, radiation exposures up to 1 rem per year for 47 years are predicted to cause fewer work-related deaths than expected for the average worker in Canadian industry. Radiation exposures of 5 rem per year from age 18 to 65 would result in predicted risk which is about four times higher than that for most workers in Canada and might increase the chances of death before age 75 to nearly the same level as for the average member of the general public. (auth)

Workers' dermal exposure to UV-curable acrylates in the furniture and Parquet industry.