WorldWideScience

Sample records for dta

  1. Your Child's Immunizations: Diphtheria, Tetanus & Pertussis Vaccine (DTaP)

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Your Child's Immunizations: Diphtheria, Tetanus & Pertussis Vaccine (DTaP) KidsHealth / For ... child outweigh the potential risks. Caring for Your Child After DTaP Immunization Your child may have a ...

  2. Nano-DTA and nano-DSC with cantilever-type calorimeter

    International Nuclear Information System (INIS)

    Nakabeppu, Osamu; Deno, Kohei

    2016-01-01

    Highlights: • Nanocalorimetry with original cantilever type calorimeters. • The calorimeters showed the enthalpy resolution of 200 nJ level. • Nano-DTA of a binary alloy captured a probabilistic peak after solidification. • Power compensation DSC of a microgram level sample was demonstrated. • The DSC and DTA behavior were explained with a lumped model. - Abstract: Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) of the minute samples in the range of microgram to nanogram were studied using original cantilever-type calorimeters. The micro-fabricated calorimeter with a heater and thermal sensors was able to perform a fast temperature scan at above 1000 K/s and a high-resolution heat measurement. The DTA of minuscule metal samples demonstrated some advances such as the thermal analysis of a 20 ng level indium and observation of a strange phase transition of a binary alloy. The power compensation type DSC using a thermal feedback system was also performed. Thermal information of a microgram level sample was observed as splitting into the DSC and DTA signals because of a mismatch between the sample and the calorimeter. Although there remains some room for improvement in terms of the heat flow detection, the behavior of the compensation system in the DSC was theoretically understood through a lumped model. Those experiments also produced some findings, such as a fin effect with sample loading, a measurable weight range, a calibration of the calorimeter and a product design concept. The development of the nano-DTA and nano-DSC will enable breakthroughs for the fast calorimetry of the microscopic size samples.

  3. Diphtheria, tetanus, and pertussis (DTaP) vaccines - what you need to know

    Science.gov (United States)

    ... is taken in its entirety from the CDC Diphtheria, Tetanus, and Pertussis (DTaP) Vaccine Information Statement (VIS): ... vis-statements/dtap.html CDC review information for Diphtheria, Tetanus, and Pertussis (DTaP) VIS: Page last reviewed: ...

  4. Incomplete Early Childhood Immunization Series and Missing Fourth DTaP Immunizations; Missed Opportunities or Missed Visits?

    Science.gov (United States)

    Robison, Steve G

    2013-01-01

    The successful completion of early childhood immunizations is a proxy for overall quality of early care. Immunization statuses are usually assessed by up-to-date (UTD) rates covering combined series of different immunizations. However, series UTD rates often only bear on which single immunization is missing, rather than the success of all immunizations. In the US, most series UTD rates are limited by missing fourth DTaP-containing immunizations (diphtheria/tetanus/pertussis) due at 15 to 18 months of age. Missing 4th DTaP immunizations are associated either with a lack of visits at 15 to 18 months of age, or to visits without immunizations. Typical immunization data however cannot distinguish between these two reasons. This study compared immunization records from the Oregon ALERT IIS with medical encounter records for two-year olds in the Oregon Health Plan. Among those with 3 valid DTaPs by 9 months of age, 31.6% failed to receive a timely 4th DTaP; of those without a 4th DTaP, 42.1% did not have any provider visits from 15 through 18 months of age, while 57.9% had at least one provider visit. Those with a 4th DTaP averaged 2.45 encounters, while those with encounters but without 4th DTaPs averaged 2.23 encounters.

  5. Structure investigations on zirconium phosphate preparates by means of DTA, ETA, and TG

    International Nuclear Information System (INIS)

    Herbell, J.D.; Specht, S.; Born, H.J.

    1976-01-01

    The simultanous DTA, ETA and TG inorganic ion exchanger based on zirconium phosphate enables the clear interpretation of the effects occuring. In particular it can be seen that the fast transition in amorphous preparates at high temperature of a badly defined form of pyrophosphate into the cubic crystalline substances, however a measurable energy release by means of DTA is not observed due to the slight mobility of the atoms in the crystal lattice. This effect on the other hand may be seen using ETA. In addition, an exothermal reaction occuring in some preparates, especially in cation charged ones, was traced back to the forming of part-crystalline structures which could be especially fast and sensitively characterized using DTA. (orig.) [de

  6. Influence of Temperature and Catalyst on the Decomposition of Potassium Chlorate in a Simple DTA-Apparatus.

    Science.gov (United States)

    Wiederholt, Erwin

    1983-01-01

    DTA is a technique in which the temperature difference between sample/reference is measured as a function of temperature, while both are subject to a controlled temperature program. Use of a simple DTA-apparatus in demonstrating catalytic effects of manganese dioxide and aluminum oxide on decomposition temperature of potassium chlorate is…

  7. A fully liquid DTaP-IPV-HB-PRP-T hexavalent vaccine for primary and booster vaccination of healthy Turkish infants and toddlers

    Science.gov (United States)

    Ceyhan, Mehmet; Yıldırım, İnci; Tezer, Hasan; Devrim, İlker; Feroldi, Emmanuel

    2017-08-23

    Background/aim: Immunogenicity and safety of a primary series of a fully liquid, hexavalent DTaP-IPV-HB-PRP-T vaccine given at 2, 3, and 4 months of age compared to licensed comparators and a DTaP-IPV-HB-PRP-T booster at 15?18 months were evaluated. Materials and methods: This was a Phase III, randomized, open-label trial. Primary series (no hepatitis B [HB] at birth) of DTaP-IPV-HB-PRP-T (N = 155) (group 1) or licensed control vaccines (DTaP-IPV//PRP-T and standalone HB: N = 155) (group 2) and DTaP-IPV-HB-PRP-T booster were administered. Noninferiority was evaluated 1 month postprimary series for anti-HB seroprotection (SP). All other analyses were descriptive. Safety was assessed from parental reports. Results: Postprimary series noninferiority of anti-HB ≥ 10 mIU/mL was demonstrated for the DTaP-IPV-HB-PRP-T vaccine (94.0%) compared to the licensed control (96.1%). Postprimary series primary SP and seroconversion (SC) rates were high and similar for both groups. Antibody persistence (prebooster) was high for each antigen and similar between groups except for HB, which was lower for DTaP-IPV-HB-PRP-T than for standalone HB. For each antigen except HB, DTaP-IPV-HB-PRP-T booster responses were high and similar in each group. Safety was good for primary and booster series and similar between groups. Conclusion: The DTaP-IPV-HB-PRP-T vaccine is immunogenic and safe when administered in a challenging primary series schedule without HB vaccination at birth.

  8. DTaP Vaccine (Diphtheria, Tetanus, and Pertussis): What You Need to Know

    Science.gov (United States)

    ... STATEMENT DTaP Vaccine What You Need to Know (Diphtheria, Tetanus and Pertussis) Many Vaccine Information Statements are ... www. immunize. org/ vis 1 Why get vaccinated? Diphtheria, tetanus, and pertussis are serious diseases caused by ...

  9. Characteristic of DTA curves for cast ferrous alloys

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2008-04-01

    Full Text Available The study presents DTA curves for selected grades of cast iron and cast steel. The thermal effects observed on derivative curves, caused by crystallisation of single phases and eutectic were discussed. The thermal effects having their origin in crystallisation of secondary carbides were determined. It has been indicated that the range of temperatures of their crystallisation can be determined from the cooling curve t = f(τ, from the solidification curve dt/dτ = f′(τ, and from the second derivative d2t/dτ2 = f″(τ. The crystallisation rate of single phases or of their mixture is indicated by the duration of thermal effect and by the slope angle of the curve responsible for a specific thermal effect before and after its maximum. A very high sensitivity of the derivative curve to temperature changes in liquid and solid alloy and to the phase (phases growth rate enables control of alloy before pouring of moulds. The control of alloy may consist in identification of phases the presence of which is indispensable in alloy microstructure and in determination of some important properties, e.g. Rp0,2, Rm, A5 and HB. In the latter case, the statistical relationships between the above mentioned characteristic parameters of DTA curves and the selected mechanical properties have been determined. The said relationships form a basis for construction of algorithms used in development of computer programs for control of individual alloys.

  10. A freeze-stable formulation for DTwP and DTaP vaccines.

    Science.gov (United States)

    Xue, Honggang; Yang, Bangling; Kristensen, Debra D; Chen, Dexiang

    2014-01-01

    Inadvertent vaccine freezing often occurs in the cold chain and may cause damage to freeze‑sensitive vaccines. Liquid vaccines that contain aluminum salt adjuvants are particularly vulnerable. Polyol cryoprotective excipients have been shown to prevent freeze damage to hepatitis B vaccine. In this study, we examined the freeze-protective effect of propylene glycol on diphtheria-tetanus-pertussis-whole-cell (DTwP) and acellular (DTaP) vaccines. Pilot lots of DTwP and DTaP formulated with 7.5% propylene glycol underwent 3 freeze-thaw treatments. The addition of propylene glycol had no impact on pH, particle size distribution, or potency of the vaccines prior to freeze-thaw treatment; the only change noted was an increase in osmolality. The potencies and the physical properties of the vaccines containing cryoprotectant were maintained after freeze-thawing and for 3 months in accelerated stability studies. The results from this study indicate that formulating vaccines with propylene glycol can protect diphtheria-tetanus-pertussis vaccines against freeze damages.

  11. A fully liquid DTaP-IPV-Hep B-PRP-T hexavalent vaccine for primary and booster vaccination of healthy Mexican children.

    Science.gov (United States)

    Aquino, Amalia Guadalupe Becerra; Brito, Maricruz Gutiérrez; Doniz, Carlos E Aranza; Herrera, Juan Francisco Galán; Macias, Mercedes; Zambrano, Betzana; Plennevaux, Eric; Santos-Lima, Eduardo

    2012-10-05

    To evaluate an investigational, fully liquid hexavalent diphtheria-tetanus-acellular pertussis-inactivated poliovirus-hepatitis B-Haemophilus influenzae type b (DTaP-IPV-Hep B-PRP-T: Hexaxim™) vaccine for primary and booster vaccination of healthy children in Mexico. Infants (N=1189) were randomized to receive one of three lots of the DTaP-IPV-Hep B-PRP-T vaccine or a licensed hexavalent control vaccine (Infanrix™ hexa) for primary vaccination at 2, 4 and 6 months. All participants who completed the primary series and agreed to participate in the booster part of the study received a dose of the investigational vaccine at 15-18 months of age. Validated serological assays and parental reports were used to assess immunogenicity and safety, respectively. Post-primary vaccination, ≥95.8% of participants in both the DTaP-IPV-Hep B-PRP-T and control groups were seroprotected (SP) against diphtheria, tetanus, poliovirus, hepatitis B and PRP, or had seroconverted (SC) to the pertussis toxin (PT) and filamentous hemagglutinin (FHA) pertussis antigens. The SP/SC rates induced by the three DTaP-IPV-Hep B-PRP-T lots were equivalent. No differences in SP/SC rates were observed between the pooled lots of investigational vaccine and the control vaccine. Antibody persistence at 15-18 months was comparable between groups, with strong increases in all antibody concentrations post-DTaP-IPV-Hep B-PRP-T booster. Both vaccines were well tolerated for primary vaccination, as was the booster dose of DTaP-IPV-Hep B-PRP-T. These study findings confirm the suitability of the combined, fully liquid DTaP-IPV-Hep B-PRP-T vaccine for inclusion in routine childhood vaccination schedules. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Concomitant administration of diphtheria, tetanus, acellular pertussis and inactivated poliovirus vaccine derived from Sabin strains (DTaP-sIPV) with pentavalent rotavirus vaccine in Japanese infants.

    Science.gov (United States)

    Tanaka, Yoshiyuki; Yokokawa, Ruriko; Rong, Han Shi; Kishino, Hiroyuki; Stek, Jon E; Nelson, Margaret; Lawrence, Jody

    2017-06-03

    Rotavirus is the leading cause of severe acute gastroenteritis in infants and young children. Most children are infected with rotavirus, and the health and economic burdens of rotavirus gastroenteritis on healthcare systems and families are considerable. In 2012 pentavalent rotavirus vaccine (RV5) and diphtheria, tetanus, acellular pertussis and inactivated poliovirus vaccine derived from Sabin strains (DTaP-sIPV) were licensed in Japan. We examined the immunogenicity and safety of DTaP-sIPV when administrated concomitantly with RV5 in Japanese infants. A total of 192 infants 6 to 11 weeks of age randomized to Group 1 (N = 96) received DTaP-sIPV and RV5 concomitantly, and Group 2 (N = 96) received DTaP-sIPV and RV5 separately. Antibody titer to diphtheria toxin, pertussis antigens (PT and FHA), tetanus toxin, and poliovirus type 1, 2, and 3 were measured at 4 to 6 weeks following 3-doses of DTaP-sIPV. Seroprotection rates for all components of DTaP-sIPV were 100% in both groups, and the geometric mean titers for DTaP-sIPV in Group 1 were comparable to Group 2. Incidence of systemic AEs (including diarrhea, vomiting, fever, and nasopharyngitis) were lower in Group 1 than in Group 2. All vaccine-related AEs were mild or moderate in intensity. There were no vaccine-related serious AEs, no deaths, and no cases of intussusception during the study. Concomitant administration of DTaP-sIPV and RV5 induced satisfactory immune responses to DTaP-sIPV and acceptable safety profile. The administration of DTaP-sIPV given concomitantly with RV5 is expected to facilitate compliance with the vaccination schedule and improve vaccine coverage in Japanese infants.

  13. Dynamic profiles of neutralizing antibody responses elicited in rhesus monkeys immunized with a combined tetravalent DTaP-Sabin IPV candidate vaccine.

    Science.gov (United States)

    Sun, Mingbo; Ma, Yan; Xu, Yinhua; Yang, Huijuan; Shi, Li; Che, Yanchun; Liao, Guoyang; Jiang, Shude; Zhang, Shumin; Li, Qihan

    2014-02-19

    The World Health Organization has recommended that a Sabin inactivated polio vaccine (IPV) should gradually and synchronously replace oral polio vaccines for routine immunizations because its benefits in eliminating vaccine-associated paralytic poliomyelitis have been reported in different phases of clinical trials. It is also considered important to explore new tetravalent diphtheria, tetanus, and acellular pertussis-Sabin IPV (DTaP-sIPV) candidate vaccines for possible use in developing countries. In this study, the immunogenicity of a combined tetravalent DTaP-sIPV candidate vaccine was investigated in primates by evaluating the neutralizing antibody responses it induced. The dynamic profiles of the antibody responses to each of the separate antigenic components and serotypes of Sabin IPV were determined and their corresponding geometric mean titers were similar to those generated by the tetravalent diphtheria, tetanus, and acellular pertussis-conventional IPV (DTaP-cIPV), the tetravalent diphtheria, tetanus, and acellular pertussis (DTaP), and Sabin IPV vaccines in the control groups. This implies that protective immunogenic effects are conferred by this combined tetravalent formulation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Phase II and III Clinical Studies of Diphtheria-Tetanus-Acellular Pertussis Vaccine Containing Inactivated Polio Vaccine Derived from Sabin Strains (DTaP-sIPV).

    Science.gov (United States)

    Okada, Kenji; Miyazaki, Chiaki; Kino, Yoichiro; Ozaki, Takao; Hirose, Mizuo; Ueda, Kohji

    2013-07-15

    Phase II and III clinical studies were conducted to evaluate immunogenicity and safety of a novel DTaP-IPV vaccine consisting of Sabin inactivated poliovirus vaccine (sIPV) and diphtheria-tetanus-acellular pertussis vaccine (DTaP). A Phase II study was conducted in 104 healthy infants using Formulation H of the DTaP-sIPV vaccine containing high-dose sIPV (3, 100, and 100 D-antigen units for types 1, 2, and 3, respectively), and Formulations M and L, containing half and one-fourth of the sIPV in Formulation H, respectively. Each formulation was administered 3 times for primary immunization and once for booster immunization. A Phase III study was conducted in 342 healthy infants who received either Formulation M + oral polio vaccine (OPV) placebo or DTaP + OPV. The OPV or OPV placebo was orally administered twice between primary and booster immunizations. Formulation M was selected as the optimum dose. In the Phase III study, the seropositive rate was 100% for all Sabin strains after primary immunization, and the neutralizing antibody titer after booster immunization was higher than in the control group (DTaP + OPV). All adverse reactions were clinically acceptable. DTaP-sIPV was shown to be a safe and immunogenic vaccine. JapicCTI-121902 for Phase II study, JapicCTI-101075 for Phase III study (http://www.clinicaltrials.jp/user/cte_main.jsp).

  15. A Randomized, Controlled Study of DTaP-IPV-HB-PRP-T, a Fully Liquid Hexavalent Vaccine, Administered in a 3-, 5- and 11- to 12-month Schedule.

    Science.gov (United States)

    Vesikari, Timo; Silfverdal, Sven-Arne; Jordanov, Emilia; Feroldi, Emmanuel

    2017-01-01

    To assess the immunogenicity and safety of a fully liquid, ready-to-use hexavalent DTaP-IPV-HB-PRP-T vaccine when administered in a 2 + 1 schedule at 3, 5 and 11-12 months of age. Phase III, randomized, active-controlled, observer-blind, multicenter study. Infants were randomized to receive DTaP-IPV-HB-PRP-T (N = 275) or a licensed control hexavalent vaccine (DTaP-IPV-HB//PRP~T: N = 275), both given in coadministration with Prevenar 13. Serum was analyzed for immune responses to all vaccine antigens. Noninferiority of DTaP-IPV-HB-PRP-T to the control vaccine was tested at completion of the primary series using predefined seroprotection (SP) rate and vaccine response (VR) rates. Safety was assessed using parental reports. Noninferiority of DTaP-IPV-HB-PRP-T to the control vaccine was demonstrated postdose 3 for each antigen, and the SP (for D, T, poliovirus 1, 2 and 3, hepatitis B and polyribosylribitol phosphate) and VR rates (for pertussis toxin and filamentous hemagglutinin) were high in each group. SP rates for D, T, polio 1, 2, 3 and VR rates for pertussis toxin and filamentous hemagglutinin were similar in each group. For hepatitis B, SP rate was slightly higher for DTaP-IPV-HB//PRP~T (99.6%) than DTaP-IPV-HB-PRP-T (96.4%), and for PRP, SP rate was higher for DTaP-IPV-HB-PRP-T (93.5%) than DTaP-IPV-HB//PRP~T (85.2%). For Prevenar 13, the SP rate was high for each serotype and similar for both groups. All vaccines were well tolerated. These study findings confirm the safety and immunogenicity and thus the suitability of this fully liquid hexavalent vaccine for administration in a 2 + 1 schedule.

  16. Measurements of Gasification Characteristics of Coal and Char in CO2-Rich Gas Flow by TG-DTA

    Directory of Open Access Journals (Sweden)

    Zhigang Li

    2013-01-01

    Full Text Available Pyrolysis, combustion, and gasification properties of pulverized coal and char in CO2-rich gas flow were investigated by using gravimetric-differential thermal analysis (TG-DTA with changing O2%, heating temperature gradient, and flow rate of CO2-rich gases provided. Together with TG-DTA, flue gas generated from the heated coal, such as CO, CO2, and hydrocarbons (HCs, was analyzed simultaneously on the heating process. The optimum O2% in CO2-rich gas for combustion and gasification of coal or char was discussed by analyzing flue gas with changing O2 from 0 to 5%. The experimental results indicate that O2% has an especially large effect on carbon oxidation at temperature less than 1100°C, and lower O2 concentration promotes gasification reaction by producing CO gas over 1100°C in temperature. The TG-DTA results with gas analyses have presented basic reference data that show the effects of O2 concentration and heating rate on coal physical and chemical behaviors for the expected technologies on coal gasification in CO2-rich gas and oxygen combustion and underground coal gasification.

  17. A Randomized Controlled Study of a Fully Liquid DTaP-IPV-HB-PRP-T Hexavalent Vaccine for Primary and Booster Vaccinations of Healthy Infants and Toddlers in Latin America.

    Science.gov (United States)

    López, Pío; Arguedas Mohs, Adriano; Abdelnour Vásquez, Arturo; Consuelo-Miranda, Maria; Feroldi, Emmanuel; Noriega, Fernando; Jordanov, Emilia; B Chir, Siham; Zambrano, Betzana

    2017-11-01

    Hexavalent diphtheria-tetanus-acellular pertussis-inactivated poliovirus-hepatitis B-Haemophilus influenzae type b (DTaP-IPV-HB-PRP-T)-containing vaccines are increasingly the standard of care. This study evaluated the primary series (NCT01177722) and booster (NCT01444781) of a fully liquid DTaP-IPV-HB-PRP-T vaccine in Latin America. Infants (N = 1375) received hepatitis B vaccine at birth and were randomized to one of 3 batches of the investigational DTaP-IPV-HB-PRP-T or licensed control vaccine (DTaP-HB-IPV//PRP-T) at 2-4 to 6 months of age, coadministered with 7-valent pneumococcal conjugate vaccine (PCV7) (2-4-6 months) and rotavirus vaccine (2-4 months). A booster of either DTaP-IPV-HB-PRP-T or control was given at 12-24 months, coadministered with PCV7. Immunogenicity was assessed by validated assays and safety from parental reports. Primary series seroprotection and vaccine response rates were equivalent for DTaP-IPV-HB-PRP-T batches. For pooled batches, noninferiority to the control vaccine was demonstrated for each antigen. There were no descriptive differences in antibody persistence or booster response between DTaP-IPV-HB-PRP-T and the control. The booster responses to either vaccine following DTaP-IPV-HB-PRP-T primary series or to DTaP-IPV-HB-PRP-T following a control vaccine primary series were similar. The anti-aP component (filamentous hemagglutinin [FHA] and pertussis toxin [PT]) vaccine response and anti-Haemophilus influenzae type b (PRP) series seroprotection (≥0.15 µg/mL) rates were ≥73.0% after 2 primary series doses. Antipyretics had no effect on the immune response, and an extra (oral) polio vaccination had no effect on the antipolio booster response. Responses to PCV7 and rotavirus vaccine were similar for each coadministration. There were no safety concerns observed with any vaccine. These results confirm the suitability of the fully liquid DTaP-IPV-HB-PRP-T vaccine for primary and booster vaccination of infants.

  18. Copper(II) acetates with aliphatic/heterocyclic amines - Coupled TG-DTA-EGA study, IR characterization and structure correlation

    Czech Academy of Sciences Publication Activity Database

    Zeleňák, V.; Vargová, Z.; Györyová, K.; Večerníková, Eva; Balek, V.

    2005-01-01

    Roč. 82, - (2005), s. 747-754 ISSN 1388-6150 Institutional research plan: CEZ:AV0Z40320502 Keywords : copper acetate * 1,3-diaminopropane * DTA Subject RIV: CA - Inorganic Chemistry Impact factor: 1.425, year: 2005

  19. Determination of γ′+γ / γ Phase Boundary in Ni-Al-Cr System Using DTA Thermal Analysis

    Directory of Open Access Journals (Sweden)

    Maciąg T.

    2016-03-01

    Full Text Available Mechanical properties at elevated temperature, in modern alloys based on intermetallic phase Ni3Al are connected with phase composition, especially with proportion of ordered phase γ′ (L12 and disordered phase γ (A1. In this paper, analysis of one key systems for mentioned alloys - Ni-Al-Cr, is presented. A series of alloys with chemical composition originated from Ni-rich part of Ni-Al-Cr system was prepared. DTA thermal analysis was performed on all samples. Based on shape of obtained curves, characteristic for continuous order-disorder transition, places of course of phase boundaries γ′+γ / γ were determined. Moreover, temperature of melting and freezing of alloys were obtained. Results of DTA analysis concerning phase boundary γ′+γ / γ indicated agreement with results obtained by authors using calorimetric solution method.

  20. Development of a certified reference material for calibration of DSC and DTA below room temperature: NMIJ CRM 5401-a, Cyclohexane for Thermal Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Yoshitaka, E-mail: y-shimizu@aist.go.jp; Ohte, Yoko; Kato, Kenji

    2013-09-20

    Highlights: • We developed a new CRM for quality assurance of DSC and DTA below room temperature. • Certified values are temperatures and enthalpies of two phase transitions. • Certified values agree with literature values. • Certified values are determined by adiabatic calorimetry and traceable to the SI. • Purity of this CRM was confirmed more than 0.9999. - Abstract: For the quality assurance of performance of differential scanning calorimeters (DSC) and differential thermal analyzers (DTA) below room temperature, we have developed “NMIJ CRM 5401-a, Cyclohexane for Thermal Analysis” applicable to calibration of DSC and DTA in the low temperature. Adiabatic calorimetry was used to measure the temperatures and enthalpies of solid–solid phase transition and fusion as certified values, and to determine the purity in amount of substance fraction as information. The certified values are consistent with their corresponding literature values within expanded uncertainties and have traceability to the SI. Purity in amount of substance fraction was measured by fractional melting method based on freezing point depression method and was confirmed to be more than 0.9999. NMIJ CRM 5401-a was produced based on a quality system in compliance with ISO Guide 34: 2000. We demonstrate the usefulness of NMIJ CRM 5401-a in the calibration, quality control, and validation aspects of DSC and DTA.

  1. Antibody responses of Macaca fascicularis against a new inactivated polio vaccine derived from Sabin strains (sIPV) in DTaP-sIPV vaccine.

    Science.gov (United States)

    Sato, Y; Shiosaki, K; Goto, Y; Sonoda, K; Kino, Y

    2013-05-01

    Antibody responses of Macaca fascicularis against a new tetravalent vaccine composed of diphtheria toxoid, tetanus toxoid, acellular pertussis antigens, and inactivated poliovirus derived from Sabin strains (sIPV) was investigated to predict an optimal dose of sIPV in a new tetravalent vaccine (DTaP-sIPV) prior to conducting a dose-defined clinical study. Monkeys were inoculated with DTaP-sIPVs containing three different antigen units of sIPVs: Vaccine A (types 1:2:3 = 3:100:100 DU), Vaccine B (types 1:2:3 = 1.5:50:50 DU), and Vaccine C (types 1:2:3 = 0.75:25:25 DU). There was no difference in the average titers of neutralizing antibody against the attenuated or virulent polioviruses between Vaccines A and B. The average neutralizing antibody titers of Vaccine C tended to be lower than those of Vaccines A and B. The sIPV antigens did not affect the anti-diphtheria or anti-tetanus antibody titers of DTaP-sIPV. Furthermore, the average neutralizing antibody titers of Vaccine A against the attenuated and virulent polioviruses were comparable between M. fascicularis and humans. These results suggest that M. fascicularis may be a useful animal model for predicting the antibody responses to sIPVs in humans, and that it may be likely to reduce the amount of sIPVs contained in DTaP-sIPVs, even for humans. Copyright © 2013 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  2. DTA and DSC study on the effect of mechanical dispersion on poly(tetrafluorethylene properties

    Directory of Open Access Journals (Sweden)

    Dumitraşa Mihai

    2014-12-01

    Full Text Available Poly(tetrafluorethylene particles were obtained by mechanical processing of the formed polymer (Teflon bar. In order to assess the effect of mechanical wear on polymer properties, their melting and crystallization behaviour was investigated by DSC and DTA, and the results were compared to the ones obtained for the native polymer. An increase of the crystallinity degree and an accentuated decrease of the average molecular weight were found for the samples submitted to mechanical wear, as a result of mechanical degradation of the polymer

  3. Persistence of hepatitis B immune memory until 9-10 years of age following hepatitis B vaccination at birth and DTaP-IPV-HB-PRP∼T vaccination at 2, 4 and 6 months.

    Science.gov (United States)

    Kosalaraksa, Pope; Chokephaibulkit, Kulkanya; Benjaponpitak, Suwat; Pancharoen, Chitsanu; Chuenkitmongkol, Sunate; B'Chir, Siham; Da Costa, Xavier; Vidor, Emmanuel

    2018-01-15

    To evaluate the long-term persistence of anti-hepatitis B surface (HBs) antibodies and the response to a HB challenge re-vaccination in children who had received a primary series of DTaP-IPV-HB-PRP∼T (Hexaxim™) or DTaP-IPV-HB/PRP∼T (Infanrix hexa™). Two cohorts of participants who had previously received HB vaccine at birth followed by either DTaP-IPV-HB-PRP∼T or DTaP-IPV-HB/PRP∼T co-administered with PCV7 at 2, 4, 6 months of age in a randomized, Phase III, observer-blind study in Thailand, were followed up for anti-HBs antibodies (geometric mean concentrations [GMCs] and seroprotection [SP] rate [% of participants with a titer ≥10 mIU/mL]) at 12-18 months of age and 9-10 years of age. A monovalent HB challenge re-vaccination was administered at 9-10 years of age and the anamnestic response was evaluated. Anti-HBs GMCs and SP rates in the DTaP-IPV-HB-PRP∼T and DTaP-IPV-HB/PRP∼T groups were high and similar post-primary vaccination series (2477 mIU/mL and 99.5% and 2442 mIU/mL and 99.5%, respectively) and declined to a similar extent in each group at 12-18 months (154.5 mIU/mL and 90.8% and 162.3 mIU/mL and 96.5%, respectively). Antibody levels further declined at 9-10 years of age (13.3 mIU/mL and 49.3% and 8.0 mIU/mL and 42.9%) and a strong anamnestic response occurred in each group post-HB challenge re-vaccination (92.8% and 98.7%, respectively). The kinetics of long-term anti-HBs antibody persistence were similar following a primary series of DTaP-IPV-HB-PRP∼T or DTaP-IPV-HB/PRP∼T. The response to a subsequent HB challenge re-vaccination was strong and similar in each group, demonstrating persisting immune memory.

  4. Concomitant administration of a fully liquid, ready-to-use DTaP-IPV-HB-PRP-T hexavalent vaccine with a meningococcal serogroup C conjugate vaccine in infants.

    Science.gov (United States)

    Vesikari, Timo; Borrow, Ray; Da Costa, Xavier; Richard, Patrick; Eymin, Cécile; Boisnard, Florence; Lockhart, Stephen

    2017-01-11

    DTaP-IPV-HB-PRP-T or hexavalent vaccines are indicated for primary and booster vaccination of infants and toddlers against diphtheria, tetanus, pertussis, hepatitis B, poliomyelitis and invasive diseases caused by Haemophilus influenzae type b (Hib). The present study evaluates the safety and immunogenicity of a ready-to-use hexavalent vaccine when co-administered with a meningococcal serogroup C conjugate (MenC) vaccine in infants. This was a phase III, open-label, randomised, multicentre study conducted in Finland. Healthy infants, aged 46-74days (n=350), were randomised in a ratio of 1:1 to receive DTaP-IPV-HB-PRP-T vaccine at two, three and four months, either with a MenC vaccine co-administered at two and four months (Group 1; n=175) or without MenC vaccine (Group 2; n=175). All infants also received routine rotavirus and 13-valent pneumococcal conjugate vaccines. The proportion of participants with an anti-HBs concentration ⩾10mIU/mL assessed one month after the third dose of DTaP-IPV-HB-PRP-T vaccine was 97.5% [95%CI: 93.1-99.3] in the coadministration group and 96.1% [95%CI: 91.8-98.6] in the group without MenC vaccine. The proportion of participants with an anti-MenC SBA titre ⩾8 assessed one month after the second dose of MenC vaccine was 100% in the coadministration group. Both primary objectives were achieved. Secondary immunogenicity and safety analyses showed that co-administration of DTaP-IPV-HB-PRP-T and MenC vaccines did not impact the immune response to the antigens of each of the two vaccines. All vaccines were well tolerated and the safety profile of DTaP-IPV-HB-PRP-T vaccine was similar in both groups. ClinicalTrials.gov identifier: NCT01839175; EudraCT number: 2012-005547-24. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  5. Compositional characterization of carbon electrode material: A study using simultaneous TG-DTA-FTIR

    International Nuclear Information System (INIS)

    Raje, Naina; Aacherekar, Darshana A.; Reddy, A.V.R.

    2009-01-01

    Present work describes the application of thermal methods, especially the evolved gas analysis (EGA) for the compositional characterization of carbon electrode material with respect to its organic, amorphous and graphitic carbon content. Trace levels of organic carbon present in the amorphous carbon samples were determined qualitatively by using FTIR absorption spectroscopy. Amorphous and graphitic carbon content in synthetic mixture samples were determined quantitatively using simultaneous TG-DTA-FTIR measurements. FTIR system was calibrated using the measured absorption signal of the evolved carbon dioxide due to the decomposition of cadmium carbonate. Inter-comparison studies using TG-FTIR measurements show that simultaneous FTIR spectroscopy is an effective complementary quantitative measurement technique for thermogravimetric analysis involving the complex decomposition reaction processes.

  6. Some characteristics of protons emitted in backward hemisphere in dTa and CTa interactions at Psub(0)=4.2 GeV/c

    International Nuclear Information System (INIS)

    Gasparyan, A.P.; Mekhtiev, R.R.

    1985-01-01

    In interactions of deuterium and carbon relativistic nuclei with tantalum at P 0 =4.2 GeV/c for secondary protons with 100 deg emission angle in lab. system, the temperature of proton kinetic energy spectra in three angle intervals has been determined. It does not contradict the values obtained in hadron-nuclear interactions. The slope parameters for backward emitted proton spectra over comulative variable β=/E-psub(11) msub(p) in dTa and CTa collisions and hadron-nucleus interactions are approximately equal as well. At the same time some difference of s: ope parameters on kinetic energy and cumulative variables spectra between dTa and CTa is observed. In CTa collisions the spectra are deeper. The comparison with the predictions of cascade model for CTa interactions is made. The cascade model taking into account the final state interaction of nucleons on the whole satisfactorily describes the experimental data

  7. Kinetics of magnesiothermic reduction of UF4 by DTA

    International Nuclear Information System (INIS)

    Raina, Amulya; Agarwal, Renu

    2016-01-01

    Uranium metal production for nuclear fuel is usually carried out by magnesio-thermic reduction of UF 4 (s). This is a highly exothermic reaction: UF 4 +2Mg → 2MgF 2 + U, ΔH r 298.15 K = -349 kJ/mol. The process is carried out by loading 1:2 molar ratio of UF 4 and Mg mixture in a large stainless steel vessel lined with insulating MgF 2 . This bomb reactor is heated to ~1023 K, but the reaction is known to start at lower temperature. The furnace heat and reaction heat results in shooting mixture temperature to >1800 K. Attaining such high temperatures is desired for complete segregation of fluoride slag (T m MgF 2 =1538 K) and uranium melt (T m =1406 K) due to large difference in their densities, 3.4 gm/cc and 17.9 gm/cc, respectively. For efficient and economic magnesio-thermic reduction of UF 4 , it is desired to understand heat distribution in the reactor vessel, which requires kinetic parameters of this reaction: activation energy (E α ) and A. As this is a solid-solid reaction, studying this reaction kinetics can be approximated by nonisothermal DTA analysis using different heating rates. For non-isothermal conditions, the heating rate (ϕ) = dT/dt is related to rate of propagation of reaction

  8. EVOLUCIÓN DE LA CATEGORIZACIÓN SEMÁNTICA EN ADULTOS MAYORES CON DIAGNÓSTICO DE DCL-A Y DTA Y SIN PATOLOGÍA NEUROLÓGICA

    Directory of Open Access Journals (Sweden)

    ANA COMESAÑA

    2015-01-01

    Full Text Available Tradicionalmente la memoria semánticahasido definida como un tesoro mental que alma-cena información sobre las palabras, su signifi-cado, como así también la relación entre ellas,los hechos y los conceptos. Una de las vías prin-cipales para explicar cómo se organiza la infor-mación en la memoria semántica (MS es atra vés de categorías. La demencia tipo Alzheimer(DTA suele estar caracterizada por un deterioroen la memoria episódica. Sin embargo, se debateen tor no al deterioro de la misma, en qué mo-mento aparece, a qué se debe y si hay una pér-dida diferencial en distintos momentos de laen fermedad. El objetivo del trabajo que se in-forma fue analizar los procesos de categoriza-ción semántica en adultos mayores sanos com- parándolos con dos grupos de personas con pa-tologías neurológicas: uno con diagnóstico dedeterioro cognitivo leve (DCL y otro con de-mencia tipo Alzheimer (DTA, emparejados poredad, nivel educativo y género. Para ello, se uti-lizaron tareas tradicionales para evaluar la me-moria semántica y también un método novedoso,el DISTSEM, que permite evaluar las estimacio-nes que realizan las personas de las distanciassemánticas entre los conceptos. Los resultadosmostraron que el grupo de personas sin patologíatuvo un rendimiento superior en todas las tareasen comparación con los grupos de personas conpatología neurológica. Por otro lado, el grupocon DTA mostró un deterioro semántico afec-tando en primer lugar a la categoría seres vivos.El DCL preservó la estructura categorial só locon pequeñas intrusiones. El DISTSEM mostróser un instrumento adecuado para la dis cri- minación entre sujetos sanos y DTA.

  9. Forty years of the Hrubý glass-forming coefficient via DTA when comparing other criteria in relation to the glass stability and vitrification ability

    Czech Academy of Sciences Publication Activity Database

    Kozmidis-Petrovic, A.; Šesták, Jaroslav

    2012-01-01

    Roč. 110, č. 2 (2012), 997-1004 ISSN 1388-6150 Institutional research plan: CEZ:AV0Z10100521 Keywords : glass transition * Hrubý criterion * glass -forming ability * DTA/DSC Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.982, year: 2012

  10. IR, 1H NMR, mass, XRD and TGA/DTA investigations on the ciprofloxacin/iodine charge-transfer complex.

    Science.gov (United States)

    Refat, Moamen S; El-Hawary, W F; Moussa, Mohamed A A

    2011-05-01

    The charge-transfer complex (CTC) of ciprofloxacin drug (CIP) as a donor with iodine (I(2)) as a sigma acceptor has been studied spectrophotometrically in CHCl(3). At maximum absorption bands, the stoichiometry of CIP:iodine system was found to be 1:1 ratio according to molar ratio method. The essential spectroscopic data like formation constant (K(CT)), molar extinction coefficient (ɛ(CT)), standard free energy (ΔG°), oscillator strength (f), transition dipole moment (μ), resonance energy (R(N)) and ionization potential (I(D)) were estimated. The spectroscopic techniques such as IR, (1)H NMR, mass and UV-vis spectra and elemental analyses (CHN) as well as TG-DTG and DTA investigations were used to characterize the chelating behavior of CIP/iodine charge-transfer complex. The iodine CT interaction was associated with a presence of intermolecular hydrogen bond. The X-ray investigation was carried out to investigate the iodine doping in the synthetic CT complex. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. Polymorphism of 1,2,3-trichloropropane: NQR and DTA study of the ordered and disordered phases

    International Nuclear Information System (INIS)

    Veglio, N; Zuriaga, M J; Monti, G A

    2004-01-01

    1,2,3-Trichloropropane was investigated by means of nuclear quadrupole resonance (NQR) and differential thermal analysis (DTA). One amorphous state and two crystalline monotropic phases (forms I and II) were found depending on the thermal history of the sample and only one is stable up to the melting point. The different phases were characterized by 35 Cl NQR. It was concluded that form I is an ordered crystal with only one molecular conformation present in the unit cell while form II is a disordered state with at least two molecules present in the unit cell. In the two crystalline phases, the presence of group reorientations (-CH 2 Cl) and molecule reorientations as a whole can be inferred from 35 Cl spin-lattice relaxation times (T 1 ) with activation energies of 33 and 42 kJ mol -1 , respectively, in form I. In form II, these activation energies are in the range 20-29 kJ mol -1 indicating that this polymorph is less compactly crystalline packed in comparison to form I

  12. Polymorphism of 1,2,3-trichloropropane: NQR and DTA study of the ordered and disordered phases

    Science.gov (United States)

    Veglio, N.; Zuriaga, M. J.; Monti1, G. A.

    2004-11-01

    1,2,3-Trichloropropane was investigated by means of nuclear quadrupole resonance (NQR) and differential thermal analysis (DTA). One amorphous state and two crystalline monotropic phases (forms I and II) were found depending on the thermal history of the sample and only one is stable up to the melting point. The different phases were characterized by 35Cl NQR. It was concluded that form I is an ordered crystal with only one molecular conformation present in the unit cell while form II is a disordered state with at least two molecules present in the unit cell. In the two crystalline phases, the presence of group reorientations (-CH2Cl) and molecule reorientations as a whole can be inferred from 35Cl spin-lattice relaxation times (T1) with activation energies of 33 and 42 kJ mol-1, respectively, in form I. In form II, these activation energies are in the range 20-29 kJ mol-1 indicating that this polymorph is less compactly crystalline packed in comparison to form I.

  13. Detection of Soluble and Fixed NH4+ in Clay Minerals by DTA and IR Reflectance Spectroscopy : A Potential Tool for Planetary Surface Exploration

    Science.gov (United States)

    Janice, Bishop; Banin, A.; Mancinelli, R. L.; Klovstad, M. R.; DeVincenzi, Donald L. (Technical Monitor)

    2001-01-01

    Nitrogen is an essential element for life. It is the only element among the six major biogenic elements, C, O, S, O, P, H, whose presence in the Martian soil has not been positively and directly established. We describe here a study assessing the ability to detect NH4 in soils by two methods: differential thermal analysis (DTA) and infrared (IR) reflectance spectroscopy. Four standard clay minerals (kaolinite, montmorillonite, illite and attapulgite) and an altered tephra sample from Mauna Kea were treated with NH4 in this study. Samples of the NH4-treated and leached clays were analyzed by DTA and infrared (IR) reflectance spectroscopy to quantify the delectability of soluble and sorbed/fixed NH4. An exotherm at 270-280 C was clearly detected in the DTA curves of NH4-treated (non-leached) samples. This feature is assigned to the thermal decomposition reaction of NH4. Spectral bands observed at 1.56, 2.05, 2.12, 3.06, 3.3, 3.5, 5.7 and 7.0 microns in the reflectance spectra of NH4-treated and leached samples are assigned to the sorbed/fixed ammonium in the clays. The montmorillonite has shown the most intense absorbance due to fixed ammonium among the leached samples in this study, as a result of its high cation sorption capacity. It is concluded that the presence of sorbed or fixed NH4 in clays may be detected by infrared (IR) reflectance or emission spectroscopy. Distinction between soluble and sorbed NH4 may be achieved through the presence or absence of several spectral features assigned to the sorbed NH4 moietyi and, specifically, by use of the 4.2 micrometer feature assigned to solution NH4. Thermal analyses furnish supporting evidence of ammonia in our study through detection of N released at temperatures of 270-330 C. Based on these results it is estimated that IR spectra measured from a rover should be able to detect ammonia if present above 20 mg NH4/g sample in the surface layers. Orbital IR spectra and thermal analyses measured on a rover may be able to

  14. Synthesis of Co/MCM-41catalysts and characterization by XRD, EDX, DTA/TG, SEM and TEM

    International Nuclear Information System (INIS)

    Sousa, B.V.; Rodrigues, M.G.F.

    2009-01-01

    Full text: In this work, molecular sieve MCM-41 was prepared as well as the Co/MCM-41 catalyst, via humid impregnation with concentration of 5 wt.% and 10 wt.% Co/MCM- 41. The attainment of the mesoporous molecular sieve, Si-MCM-41, was confirmed by the x-ray diffractogram. It was verified that after the calcination all the bromine (Br) was removed indicating that the calcination process removed all surfactant in the mesoporous structure. XRD and EDX analyses indicated that cobalt was found in the form of Co3O2 in the Co/MCM-41 catalysts. The diffraction standards showed that the impregnation and calcination processes caused changes in the structure only for catalyst with 10 wt.% Co/MCM-41. The DTA/TG curves showed that cobalt nitrate was totally decomposed on the MCM-41. From the images of SEM, it was possible to observe that the Co/MCM-41 catalysts were composed by clusters of small crystals. The images obtained from TEM showed clearly the presence of metal cobalt particles in a well dispersed form for catalyst with 5 wt.% Co/MCM41, except for the catalyst with 10 wt.% Co/MCM41. (author)

  15. The n-butyl amine TPD measurement of Brönsted acidity for solid catalysts by simultaneous TG/DTG-DTA

    Science.gov (United States)

    Sasca, V.; Avram, Livia; Verdes, Orsina; Popa, A.

    2010-06-01

    The method for Brönsted acidity measurement based on TPD of alkyl amines desorption by gas-chromatography or thermogravimetry was adapted for simultaneous TG/DTG-DTA analysis. The acidity measurements were focused on the 12-tungstophosphoric acid (H 3PW 12O 40) and its salts, especially with Cesium since these posses the highest Brönsted acidity and they are among the most interesting catalysts. The n-butyl amine (NBA) desorption takes place in three steps for Cs xH 3- xPW 12O 40, x = 0-2, and four steps for the Cs 2.5H 0.5PW 12O 40. The steps of desorption correspond to the release of NBA molecules in stages, as NBA or butene molecules resulted from the Hofmann elimination reaction and NH 3 + H 2O formed by decomposition of ammonium salt. The quantities of desorption products, C 4H 8 and NH 3 + H 2O, corresponding to the stages with the maximum desorption rates at 400-420 °C, respectively 560-600 °C, are in the stoichiometric ratio with the Brönsted acidity.

  16. Studies on thermal decomposition of phenol binder using TG/DTG/DTA and FTIR-DRIFTS techniques in temperature range 20-500 °C

    Directory of Open Access Journals (Sweden)

    *Artur Bobrowski

    2018-03-01

    Full Text Available This paper presents results of thermoanalytical and structural research on phenolic binder used in foundry for the preparation of moulding sand. The binder has been prepared based on resole type phenolic resin with the addition of ester hardener. The aim of the study was to determine the structural changes taking place in the phenolic binder under the influence of temperature. Results show that in the investigated range of temperatures,phenolic binder exhibits three exothermic thermal effects accompanying the decomposition process. The test results using the Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS technique show that the addition of a hardener stabilizes the binder structure within methylene bridges. The reduction in the reaction rate observed in the DTA curve at about 330 癈 can be associated with the formation of gaseous products by decomposition of the binder or, as suggested by the literature data, the formation of triple bonds and CN-HCN groups.

  17. Evolución de la categorización semántica en adultos mayores con diagnóstico de DCL-A y DTA y sin patología neurológica

    OpenAIRE

    Comesaña, Ana; Vivas, Jorge

    2015-01-01

    Tradicionalmente la memoria semántica ha sido definida como un tesoro mental que almacena información sobre las palabras, su significado, como así también la relación entre ellas, los hechos y los conceptos. Una de las vías principales para explicar cómo se organiza la información en la memoria semántica (MS) es a través de categorías. La demencia tipo Alzheimer (DTA) suele estar caracterizada por un deterioro en la memoria episódica. Sin embargo, se debate en torno al deterioro de la misma, ...

  18. Molecular docking, TG/DTA, molecular structure, harmonic vibrational frequencies, natural bond orbital and TD-DFT analysis of diphenyl carbonate by DFT approach

    Science.gov (United States)

    Xavier, S.; Periandy, S.; Carthigayan, K.; Sebastian, S.

    2016-12-01

    Vibrational spectral analysis of Diphenyl Carbonate (DPC) is carried out by using FT-IR and FT-Raman spectroscopic techniques. It is found that all vibrational modes are in the expected region. Gaussian computational calculations were performed using B3LYP method with 6-311++G (d, p) basis set. The computed geometric parameters are in good agreement with XRD data. The observation shows that the structure of the carbonate group is unsymmetrical by ∼5° due to the attachment of the two phenyl rings. The stability of the molecule arising from hyperconjugative interaction and charge delocalization are analyzed by Natural Bond Orbital (NBO) study and the results show the lone pair transition has higher stabilization energy compared to all other. The 1H and 13C NMR chemical shifts are calculated using the Gauge-Including Atomic Orbital (GIAO) method with B3LYP/6-311++G (d, p) method. The chemical shifts computed theoretically go very closer to the experimental results. A study on the electronic and optical properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies and Molecular electrostatic potential (MEP) exhibit the high reactivity nature of the molecule. The non-linear optical property of the DPC molecule predicted theoretically found to be good candidate for NLO material. TG/DTA analysis was made and decomposition of the molecule with respect to the temperature was studied. DPC having the anthelmintic activity is docked in the Hemoglobin of Fasciola hepatica protein. The DPC has been screened to antimicrobial activity and found to exhibit antibacterial effects.

  19. F-5M DTA Program

    Directory of Open Access Journals (Sweden)

    Daniel Ferreira V. Mattos

    2009-01-01

    Full Text Available The Brazilian F-5 was submitted to avionics and weapons upgrade. This “new” aircraft has proven to be heavier and more capable. A comprehensive damage tolerance analysis is being performed to evaluate how the new mission profiles and weight distribution may affect the airframe structural integrity. Operational data were collected at the Brazilian Air Force Bases where the fighter is flown. Software was developed in order to acquire, filter and analyze flight data. This data was used for comparison between the pre and post modernization mission profiles and to determine the stress level in each of the known aircraft fatigue critical locations (FCL. The results show that the change in aircraft weight and balance and the new operational profile can significantly change the inspection intervals of certain fatigue critical locations of the structure. A preliminary result for the horizontal tail has shown that this component will have a much more restrictive maintenance schedule to assure flight safety.

  20. Meaning and death-thought accessibility.

    Science.gov (United States)

    Van Tongeren, Daryl R; Green, Jeffrey D

    2018-01-01

    Meaning is a central feature in human life, but death can disrupt a sense of meaning. Two experiments tested the hypothesis that meaning in life and meaning in death are distinct types of meaning when mortality is salient and differentially affect death-thought accessibility (DTA). In Experiment 1, imagining a specific scenario in which meaning is preserved beyond death reduced DTA relative to a standard mortality salience prime; moreover, these effects were not due to changes in self-esteem. In Experiment 2, imagining a meaningful life when mortality is salient elicited greater DTA, whereas imagining meaning in death elicited less DTA. Imbuing death with meaning attenuates DTA, whereas meaning in life increases DTA. © 2017 The British Psychological Society.

  1. Delay and death-thought accessibility: a meta-analysis.

    Science.gov (United States)

    Steinman, Christopher T; Updegraff, John A

    2015-12-01

    The dual-process component of Terror Management Theory (TMT) proposes that different types of threats lead to increases in death-thought accessibility (DTA) after different delay intervals. Experimental studies of terror management threats' effect on DTA were collected and coded for their use of explicitly death-related (vs. not explicitly death-related) threats, and for their use of delay and task-switching during the delay. Results reveal that studies using death-related threats achieved larger DTA effect-sizes when they included more task-switching or a longer delay between the threat and the DTA measurement. In contrast, studies using threats that were not explicitly death-related achieved smaller DTA effect-sizes when they included more task-switching between the threat and the DTA measurement. These findings provide partial support for the dual-process component's predictions regarding delay and DTA. Limitations and future directions are discussed. © 2015 by the Society for Personality and Social Psychology, Inc.

  2. Immunogenicity and reactogenicity of Infanrix™ when co-administered with meningococcal MenACWY-TT conjugate vaccine in toddlers primed with MenHibrix™ and Pediarix™.

    Science.gov (United States)

    Leonardi, Michael; Latiolais, Thomas; Sarpong, Kwabena; Simon, Michael; Twiggs, Jerry; Lei, Paul; Rinderknecht, Stephen; Blatter, Mark; Bianco, Veronique; Baine, Yaela; Friedland, Leonard R; Baccarini, Carmen; Miller, Jacqueline M

    2015-02-11

    Co-administration of an investigational quadrivalent meningococcal serogroups A, C, W and Y tetanus toxoid conjugate vaccine (MenACWY-TT) with the fourth dose of diphtheria-tetanus-acellular pertussis vaccine (DTaP) at age 15-18 months was investigated in 3-dose Haemophilus influenzae type b-meningococcal serogroups C/Y conjugate vaccine (HibMenCY-TT)-primed toddlers. Infants were randomized (5:1) and primed at 2, 4 and 6 months of age with HibMenCY-TT and DTaP-hepatitis B-inactivated poliovirus (DTaP-HBV-IPV) vaccine, or Hib-TT and DTaP-HBV-IPV (Control). HibMenCY-TT+ DTaP-HBV-IPV vaccinees were re-randomized (2:2:1) to receive MenACWY-TT at 12-15 months and DTaP at 15-18 months (MenACWY-TT group); MenACWY-TT co-administered with DTaP at 15-18 months (Coad group); or HibMenCY-TT at 12-15 months and DTaP at 15-18 months (HibMenCY-TT group). Controls received DTaP at 15-18 months. Only children in the HibMenCY-TT group received a fourth dose of Hib conjugate vaccine due to Hib conjugate vaccine shortage at the time of the study. DTaP immunogenicity and reactogenicity were assessed one month post-vaccination. Pre-defined statistical non-inferiority criteria between Coad and Control groups were met for diphtheria, tetanus and filamentous haemagglutinin but not pertussis toxoid and pertactin. Following vaccination ≥99% of children had anti-diphtheria/anti-tetanus concentrations ≥1.0 IU/ml. Pertussis GMCs were lower in all investigational groups versus Control. In post hoc analyses, pertussis antibody concentrations were above those in infants following 3-dose DTaP primary vaccination in whom efficacy against pertussis was demonstrated (Schmitt, von König, et al., 1996; Schmitt, Schuind, et al., 1996). The reactogenicity profile of the Coad group was similar to DTaP administered alone. Routine booster DTaP was immunogenic with an acceptable safety profile when co-administered with MenACWY-TT vaccine in HibMenCY-TT-primed toddlers. These data support the

  3. Immunogenicity, Safety, and Tolerability of Bivalent rLP2086 Meningococcal Group B Vaccine Administered Concomitantly With Diphtheria, Tetanus, and Acellular Pertussis and Inactivated Poliomyelitis Vaccines to Healthy Adolescents.

    Science.gov (United States)

    Vesikari, Timo; Wysocki, Jacek; Beeslaar, Johannes; Eiden, Joseph; Jiang, Qin; Jansen, Kathrin U; Jones, Thomas R; Harris, Shannon L; O'Neill, Robert E; York, Laura J; Perez, John L

    2016-06-01

    Concomitant administration of bivalent rLP2086 (Trumenba [Pfizer, Inc] and diphtheria, tetanus, and acellular pertussis and inactivated poliovirus vaccine (DTaP/IPV) was immunologically noninferior to DTaP/IPV and saline and was safe and well tolerated. Bivalent rLP2086 elicited robust and broad bactericidal antibody responses to diverse Neisseria meningitidis serogroup B strains expressing antigens heterologous to vaccine antigens after 2 and 3 vaccinations. Bivalent rLP2086, a Neisseria meningitidis serogroup B (MnB) vaccine (Trumenba [Pfizer, Inc]) recently approved in the United States to prevent invasive MnB disease in individuals aged 10-25 years, contains recombinant subfamily A and B factor H binding proteins (fHBPs). This study evaluated the coadministration of Repevax (diphtheria, tetanus, and acellular pertussis and inactivated poliovirus vaccine [DTaP/IPV]) (Sanofi Pasteur MSD, Ltd) and bivalent rLP2086. Healthy adolescents aged ≥11 to B proteins different from the vaccine antigens. Participants were randomly assigned to receive bivalent rLP2086 + DTaP/IPV (n = 373) or saline + DTaP/IPV (n = 376). Immune responses to DTaP/IPV in participants who received bivalent rLP2086 + DTaP/IPV were noninferior to those in participants who received saline + DTaP/IPV.The proportions of bivalent rLP2086 + DTaP/IPV recipients with prespecified seroprotective hSBA titers to the 4 MnB test strains were 55.5%-97.3% after vaccination 2 and 81.5%-100% after vaccination 3. The administration of bivalent rLP2086 was well tolerated and resulted in few serious adverse events. Immune responses to DTaP/IPV administered with bivalent rLP2086 to adolescents were noninferior to DTaP/IPV administered alone. Bivalent rLP2086 was well tolerated and elicited substantial and broad bactericidal responses to diverse MnB strains in a high proportion of recipients after 2 vaccinations, and these responses were further enhanced after 3 vaccinations.ClinicalTrials.gov identifier NCT01323270

  4. The Role of Anti-Drug Antibodies in the Pharmacokinetics, Disposition, Target Engagement, and Efficacy of a GITR Agonist Monoclonal Antibody in Mice.

    Science.gov (United States)

    Brunn, Nicholas D; Mauze, Smita; Gu, Danling; Wiswell, Derek; Ueda, Roanna; Hodges, Douglas; Beebe, Amy M; Zhang, Shuli; Escandón, Enrique

    2016-03-01

    Administration of biologics to enhance T-cell function is part of a rapidly growing field of cancer immunotherapy demonstrated by the unprecedented clinical success of several immunoregulatory receptor targeting antibodies. While these biologic agents confer significant anti-tumor activity through targeted immune response modulation, they can also elicit broad immune responses potentially including the production of anti-drug antibodies (ADAs). DTA-1, an agonist monoclonal antibody against GITR, is a highly effective anti-tumor treatment in preclinical models. We demonstrate that repeated dosing with murinized DTA-1 (mDTA-1) generates ADAs with corresponding reductions in drug exposure and engagement of GITR on circulating CD3(+) CD4(+) T cells, due to rapid hepatic drug uptake and catabolism. Mice implanted with tumors after induction of preexisting mDTA-1 ADA show no anti-tumor efficacy when given 3 mg/kg mDTA-1, an efficacious dose in naive mice. Nonetheless, increasing mDTA-1 treatment to 30 mg/kg in ADA-positive mice restores mDTA-1 exposure and GITR engagement on circulating CD3(+) CD4(+) T cells, thereby partially restoring anti-tumor efficacy. Formation of anti-mDTA-1 antibodies and changes in drug exposure and disposition does not occur in GITR(-/-) mice, consistent with a role for GITR agonism in humoral immunity. Finally, the administration of muDX400, a murinized monoclonal antibody against the checkpoint inhibitor PD-1, dosed alone or combined with mDTA-1 did not result in reduced muDX400 exposure, nor did it change the nature of the anti-mDTA-1 response. This indicates that anti-GITR immunogenicity may not necessarily impact the pharmacology of coadministered monoclonal antibodies, supporting combination immunomodulatory strategies. Copyright © 2016 by The American Society for Pharmacology and Experimental Therapeutics.

  5. Investigation of dehydration reaction of BaCl2.2H2O and SrCl2.6H2O by thermal analysis under pressure

    International Nuclear Information System (INIS)

    Homma, Tsuneyuki; Yamada, Tetsuo

    1978-01-01

    The dehydration reactions of BaCl 2 .2H 2 O and SrCl 2 .6H 2 O were investigated by the techniques of thermal analysis, i.e. thermogravimetry (TG and DTG) and differential thermal analysis (DTA) under pressures of 1, 4, 10 and 40 atm. For BaCl 2 .2H 2 O, the DTA curves showed two peaks at 1 atm and three or four peaks at pressures above 4 atm, and the TG curves showed two steps over the range of 1 -- 10 atm and 3 steps at 40 atm. For SrCl 2 .6H 2 O, the DTA curves showed five peaks at respective pressure, and the TG curves showed three steps at 1 atm and two steps at pressures above 4 atm. As a common effect of pressure to the dehydration of these two salts, DTG peaks and some of DTA peaks shifted to higher temperatures with a increase in pressure, but a few peaks remained unshifted on DTA curves in spite of increasing pressure. The peaks which corresponded to these unshifted peaks on DTA curves were not observed on DTG curves. The unshifted peaks on DTA curves were attributed to the endothermic reaction accompanied by the dissociation of coordination water. The DTA and TG curves suggested that both salts formed the intermediate state between anhydrous and monohydrate states. (auth.)

  6. Phase diagrams of novel Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} quasi-ternary system following DTA and X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Barchiy, I.E.; Tatzkar, A.R. [Department of Chemistry, Uzhgorod National University, Pidgirna St., 46, Uzhgorod 88000 (Ukraine); Fedorchuk, A.O. [Department of Inorganic and Organic Chemistry, Lviv National University of Veterinary Medicine and Biotechnologies, Pekarska St., 50, Lviv 79010 (Ukraine); Plucinski, K., E-mail: kpluc2006@wp.pl [Electronics Department, Military University Technology, Warsaw, Kaliskiego 2, Warsaw 00-908 (Poland)

    2016-06-25

    Phase relation in the Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} quasiternary system were studied by the DTA and X-ray diffraction in combination with mathematical modeling. The phase diagrams of the Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2} and Tl{sub 2}SnSe{sub 3}–TlSbSe{sub 2} systems, the perspective views of the phase interaction in the ternary system, the liquidus surface projection, the isothermal section at 423 K were built for the first time. The Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2}–Tl{sub 2}SnSe{sub 3} system is of the invariant eutectic type and is characterized by the formation of limited solid solutions following initial ternary compounds. New complex compounds are not formed. - Highlights: • Two Tl{sub 4}SnSe{sub 4}–TlSbSe{sub 2},Tl{sub 2}SnSe{sub 3}–TlSbSe{sub 2} systems were explored. • Invariant processes in the ternary system were determined. • New complex compounds were not observed in ternary system.

  7. A theoretical and empirical review of the death-thought accessibility concept in terror management research.

    Science.gov (United States)

    Hayes, Joseph; Schimel, Jeff; Arndt, Jamie; Faucher, Erik H

    2010-09-01

    Terror management theory (TMT) highlights the motivational impact of thoughts of death in various aspects of everyday life. Since its inception in 1986, research on TMT has undergone a slight but significant shift from an almost exclusive focus on the manipulation of thoughts of death to a marked increase in studies that measure the accessibility of death-related cognition. Indeed, the number of death-thought accessibility (DTA) studies in the published literature has grown substantially in recent years. In light of this increasing reliance on the DTA concept, the present article is meant to provide a comprehensive theoretical and empirical review of the literature employing this concept. After discussing the roots of DTA, the authors outline the theoretical refinements to TMT that have accompanied significant research findings associated with the DTA concept. Four distinct categories (mortality salience, death association, anxiety-buffer threat, and dispositional) are derived to organize the reviewed DTA studies, and the theoretical implications of each category are discussed. Finally, a number of lingering empirical and theoretical issues in the DTA literature are discussed with the aim of stimulating and focusing future research on DTA specifically and TMT in general.

  8. [Immunogenicity of sabin inactivated poliovirus vaccine induced by diphtheria-tetanus-acellular pertussis and Sabin inactivated poliovirus combined vaccine].

    Science.gov (United States)

    Ma, Yan; Qin, Min; Hu, Hui-Qiong; Ji, Guang; Feng, Ling; Gao, Na; Gu, Jie; Xie, Bing-Feng; He, Ji-Hong; Sun, Ming-Bo

    2011-06-01

    In order to search the preparation process and optimazing dosage ratio of adsorbed diphtheria-tetanus-acellular pertussis and sabin inactivated poliovirus combined vaccine (DTaP-sIPV), the neutralizing antibody titers of IPV induced by different concentration of DTaP-sIPV were investigated on rats. Two batches of DTaP-sLPV were produced using different concentration of sIPV and the quality control was carried. Together with sabin-IPV and DTaP-wIPV ( boostrix-polio, GSK, Belgium) as control group, the DTaP-sIPV were administrated on three-dose schedule at 0, 1, 2 month on rats. Serum sample were collected 30 days after each dose and neutralizing antibody titers against three types poliovirus were determined using micro-neutralization test. Two batches of prepared DTaP-sIPV and control sLPV were according to the requirement of Chinese Pharmacopoeia (Volume III, 2005 edition) and showed good stability. The seropositivity rates were 100% for sabin inactivated poliovirus antigen in all groups. The GMTs (Geometric mean titers) of neutralizing antibodies against three types poliovirus increased. The prepared DTaP-sIPV was safe, stable and effective and could induced high level neutralizing antibody against poliovirus on rats.

  9. Diphtheria, Tetanus, and Pertussis (DTaP) Vaccine

    Science.gov (United States)

    Certiva® (as a combination product containing Diphtheria, Tetanus Toxoids, Acellular Pertussis Vaccine) ... Daptacel® (as a combination product containing Diphtheria, Tetanus Toxoids, Acellular Pertussis Vaccine)

  10. The application of DTA and TG methods to investigate the non-crystalline hydration products of CaAl2O4 and Ca7ZrAl6O18 compounds

    International Nuclear Information System (INIS)

    Szczerba, Jacek; Madej, Dominika; Śnieżek, Edyta; Prorok, Ryszard

    2013-01-01

    Highlights: ► Hydrates, i.e. CAH 10 , C 2 AH 8 , C 3 AH 6 and C 4 AH 19 are formed during hydration of CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 . ► Hydrated CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 compounds were investigated by X-ray diffraction, SEM/EDS and thermal analysis. ► The hydration reaction proceeds as consumes the unreacted core of the CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 grain. - Abstract: The hydration products and thermal decomposition mechanism of hydrated CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 compounds were investigated by X-ray diffraction, SEM/EDS and thermal analysis. The processes of crystal hydrate nucleation and precipitation were preceded by the evolution of the X-ray amorphous phase during the first 24 h of hydration. DTA–TGA–EGA techniques allowed the study of the detailed decomposition and identification of intermediate and stable to be performed. The differential thermal analysis (DTA) curves of hydrated CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 compounds show five similar endothermic peaks due to crystal water desorption. According to the quantitative TGA–EGA analyses performed on hydrated CaAl 2 O 4 and Ca 7 ZrAl 6 O 18 compounds, it was found that C 2 AH 8 , C 3 AH 6 and Al(OH) 3 phases are the main hydration products of CaAl 2 O 4 . Under the same laboratory conditions, the hydration of Ca 7 ZrAl 6 O 18 proceeds with the formation of mainly CAH 10 and AH 3 -gel phases. We provide the original illustrations of the hydrate crystals formation via amorphous phases

  11. Facile formation of dendrimer-stabilized gold nanoparticles modified with diatrizoic acid for enhanced computed tomography imaging applications.

    Science.gov (United States)

    Peng, Chen; Li, Kangan; Cao, Xueyan; Xiao, Tingting; Hou, Wenxiu; Zheng, Linfeng; Guo, Rui; Shen, Mingwu; Zhang, Guixiang; Shi, Xiangyang

    2012-11-07

    We report a facile approach to forming dendrimer-stabilized gold nanoparticles (Au DSNPs) through the use of amine-terminated fifth-generation poly(amidoamine) (PAMAM) dendrimers modified by diatrizoic acid (G5.NH(2)-DTA) as stabilizers for enhanced computed tomography (CT) imaging applications. In this study, by simply mixing G5.NH(2)-DTA dendrimers with gold salt in aqueous solution at room temperature, dendrimer-entrapped gold nanoparticles (Au DENPs) with a mean core size of 2.5 nm were able to be spontaneously formed. Followed by an acetylation reaction to neutralize the dendrimer remaining terminal amines, Au DSNPs with a mean size of 6 nm were formed. The formed DTA-containing [(Au(0))(50)-G5.NHAc-DTA] DSNPs were characterized via different techniques. We show that the Au DSNPs are colloid stable in aqueous solution under different pH and temperature conditions. In vitro hemolytic assay, cytotoxicity assay, flow cytometry analysis, and cell morphology observation reveal that the formed Au DSNPs have good hemocompatibility and are non-cytotoxic at a concentration up to 3.0 μM. X-ray absorption coefficient measurements show that the DTA-containing Au DSNPs have enhanced attenuation intensity, much higher than that of [(Au(0))(50)-G5.NHAc] DENPs without DTA or Omnipaque at the same molar concentration of the active element (Au or iodine). The formed DTA-containing Au DSNPs can be used for CT imaging of cancer cells in vitro as well as for blood pool CT imaging of mice in vivo with significantly improved signal enhancement. With the two radiodense elements of Au and iodine incorporated within one particle, the formed DTA-containing Au DSNPs may be applicable for CT imaging of various biological systems with enhanced X-ray attenuation property and detection sensitivity.

  12. Timing of routine infant vaccinations and risk of food allergy and eczema at one year of age.

    Science.gov (United States)

    Kiraly, N; Koplin, J J; Crawford, N W; Bannister, S; Flanagan, K L; Holt, P G; Gurrin, L C; Lowe, A J; Tang, M L K; Wake, M; Ponsonby, A-L; Dharmage, S C; Allen, K J

    2016-04-01

    Epidemiological evidence suggests that routine vaccinations can have nontargeted effects on susceptibility to infections and allergic disease. Such effects may depend on age at vaccination, and a delay in pertussis vaccination has been linked to reduced risk of allergic disease. We aimed to test the hypothesis that delay in vaccines containing diphtheria-tetanus-acellular pertussis (DTaP) is associated with reduced risk of food allergy and other allergic diseases. HealthNuts is a population-based cohort in Melbourne, Australia. Twelve-month-old infants were skin prick-tested to common food allergens, and sensitized infants were offered oral food challenges to determine food allergy status. In this data linkage study, vaccination data for children in the HealthNuts cohort were obtained from the Australian Childhood Immunisation Register. Associations were examined between age at the first dose of DTaP and allergic disease. Of 4433 children, 109 (2.5%) received the first dose of DTaP one month late (delayed DTaP). Overall, delayed DTaP was not associated with primary outcomes of food allergy (adjusted odds ratio (aOR) 0.77; 95% CI: 0.36-1.62, P = 0.49) or atopic sensitization (aOR: 0.66; 95% CI: 0.35-1.24, P = 0.19). Amongst secondary outcomes, delayed DTaP was associated with reduced eczema (aOR: 0.57; 95% CI: 0.34-0.97, P = 0.04) and reduced use of eczema medication (aOR: 0.45; 95% CI: 0.24-0.83, P = 0.01). There was no overall association between delayed DTaP and food allergy; however, children with delayed DTaP had less eczema and less use of eczema medication. Timing of routine infant immunizations may affect susceptibility to allergic disease. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. Immunogenicity and safety of an inactivated hepatitis A vaccine when coadministered with Diphtheria-tetanus-acellular pertussis and haemophilus influenzae type B vaccines in children 15 months of age.

    Science.gov (United States)

    Trofa, Andrew F; Klein, Nicola P; Paul, Ian M; Michaels, Marian G; Goessler, Mary; Chandrasekaran, Vijayalakshmi; Blatter, Mark

    2011-09-01

    This study (NCT00197236) evaluated the safety and immunogenicity of a hepatitis A virus (HAV) vaccine when coadministered with diphtheria-tetanus-acellular pertussis (DTaP) and Haemophilus influenzae type b (Hib) vaccines in children 15 months of age. This was an open-labeled, multicenter study with healthy subjects enrolled and randomized (1:1:1) into 3 treatment groups. A total of 394 subjects received the first study vaccinations at 15 months of age. Group HAV (N = 135) received 2 doses of HAV vaccine 6 to 9 months apart. Group HAV+DTaP+Hib (N = 127) received HAV vaccine coadministered with DTaP and Hib vaccines and the second dose of HAV vaccine, 6 to 9 months later. Group DTaP+Hib→HAV (N = 132) received the DTaP and Hib vaccines at 15 months of age, followed by HAV vaccine 30 days later and the second dose of HAV vaccine 7 to 10 months after the DTaP+Hib vaccines. Immune responses were evaluated before the first study vaccination and 30 days after each vaccine dose. Solicited, unsolicited, and serious adverse events were collected. After 2 doses of the HAV vaccine, all subjects in the 3 groups were seropositive. The geometric mean concentration of anti-HAV antibodies ranged between 1625.1 and 1904.4 mIU/mL. Coadministration of the 3 vaccines did not impact immunogenicity of the HAV, DTaP, or Hib vaccines. Vaccines were well tolerated in all groups. A 2-dose schedule of HAV vaccine was well tolerated and immunogenic when administered to children starting at 15 months of age. Immune responses to the DTaP or Hib vaccines were similar whether they were administered alone or were coadministered with the HAV vaccine.

  14. Quadrivalent meningococcal (MenACWY-TT) conjugate vaccine or a fourth dose of H. influenzae-N. meningitidis C/Y conjugate vaccine (HibMenCY-TT) is immunogenic in toddlers who previously received three doses of HibMenCY-TT in infancy.

    Science.gov (United States)

    Leonardi, Michael; Latiolais, Thomas; Sarpong, Kwabena; Simon, Michael; Twiggs, Jerry; Lei, Paul; Rinderknecht, Stephen; Blatter, Mark; Bianco, Veronique; Baine, Yaela; Friedland, Leonard R; Miller, Jacqueline M

    2015-02-11

    Immunogenicity and safety of a single dose of MenACWY-TT or a fourth dose of HibMenCY-TT were evaluated in the second year of life in HibMenCY-TT-primed toddlers. Healthy infants were randomized (5:1) and primed at 2, 4 and 6 months of age with HibMenCY-TT and diphtheria-tetanus-acellular pertussis-hepatitis B-inactivated poliovirus (DTaP-HBV-IPV) vaccine; or Hib-TT and DTaP-HBV-IPV (control). Recipients of HibMenCY-TT+DTaP-HBV-IPV were re-randomized (2:2:1) to receive MenACWY-TT at 12-15 months and DTaP at 15-18 months; MenACWY-TT co-administered with DTaP at 15-18 months; or HibMenCY-TT at 12-15 months and DTaP at 15-18 months. Controls received DTaP only at 15-18 months due to Hib conjugate vaccine shortage. Serum bactericidal activity using human complement (hSBA) and safety were assessed one month after meningococcal vaccination. After vaccination with MenACWY-TT at 12-15 months or MenACWY-TT+DTaP at 15-18 months, all subjects previously primed for serogroups C/Y had hSBA ≥1:8 for these serogroups. At least 96.1% also had hSBA ≥1:8 for serogroups A/W. All subjects in the HibMenCY-TT group had hSBA ≥1:8 for serogroups C/Y. All pre-defined statistical criteria for meningococcal immunogenicity were satisfied. All vaccination regimens had acceptable safety profiles. Children primed with three doses of HibMenCY-TT who then received a single dose of MenACWY-TT or a fourth dose of HibMenCY-TT had robust increases in hSBA titers for serogroups C/Y. These data provide support that MenACWY-TT, given with or without the fourth scheduled dose of DTaP could be administered as an alternative to a fourth dose of HibMenCY-TT in the second year of life. This study (110870/110871) is registered at www.clinicaltrials.gov NCT00614614. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  15. Pricing strategies for combination pediatric vaccines based on the lowest overall cost formulary.

    Science.gov (United States)

    Behzad, Banafsheh; Jacobson, Sheldon H; Sewell, Edward C

    2012-10-01

    This paper analyzes pricing strategies for US pediatric combination vaccines by comparing the lowest overall cost formularies (i.e., formularies that have the lowest overall cost). Three pharmaceutical companies compete pairwise over the sale of monovalent and combination vaccines. Particular emphasis is placed on examining the price of Sanofi Pasteur's DTaP-IPV/HIb under different conditions. The main contribution of the paper is to provide the lowest overall cost formularies for different prices of DTaP-IPV/HIb and other Sanofi Pasteur vaccines. The resulting analysis shows that DTaP-IPV/HIb could have been more competitively priced compared with the combination vaccine DTaP-HepB-IPV, for federal contract prices in 2009, 2010 and 2011. This study also proposes the lowest overall cost formularies when shortages of monovalent vaccines occur.

  16. DTA AND MOSSBAUER STUDIES IN RARE EARTH ORTHOFERRITES

    Energy Technology Data Exchange (ETDEWEB)

    Eibschuetz, M.; Gorodetsky, G.; Shtrikman, S.; Treves, D.

    1963-11-15

    Curie temperatures of 14 different orthoferrites with the chemical formula RFeO/sub 3/ (R = Y, La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were measured by differential thermal analysis. Hyperfine interactions of the Fe/ sup 57/ nucleus in the same materials were determined from their Mossbauer spectra. It is found that the quadrupole splitting with the exception of the case of Sm, isomer shift, Curie temperature, and internal field vary regularly with the ionic size of R. (auth)

  17. Deferred Tax Assests and Bank Regulatory Capital

    NARCIS (Netherlands)

    Gallemore, J.

    2012-01-01

    Abstract: In this study, I examine three issues: (1) whether the probability of bank failure is increasing in the proportion of regulatory capital composed of deferred tax assets (DTA), (2) whether market participants incorporate the increased failure risk associated with the DTA component of

  18. Study on the decomposition kinetics of FOX-7 and HNF

    NARCIS (Netherlands)

    Klerk, W.P.C. de; Popescu, C.; Heijden, A.E.D.M. van der

    2003-01-01

    At TNO Prins Maurits Laboratory the characterisation and application of energetic materials is one of the main research topics. In this respect, the activities are focussed on using thermal analysis techniques such as TG/DTA and DSC. Standard DSC and TG/DTA techniques usually apply a linear

  19. Glass-ceramic material of the Si-Ca-K system sintered from sugarcane bagasse ash; Material vitro-ceramico do distema SiO{sub 2}-CaO-K{sub 2}O sinterizado a partir de cinza de bagaco de cana de acucar

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, S.R.; Silva, R.A.; Santos, G.C.; Santos, G.T.A., E-mail: rainho@fct.unesp.b [Universidade Estadual Paulista (DFQB/FCT/UNESP), Presidente Prudente, SP (Brazil). Fac. de Ciencias e Tecnologia. Dept. de Fisica, Quimica e Biologia; Romero, M.; Rincon, J.Ma. [Consejo Superior de Investigaciones Cientificas (IETCC/CSIC), Madri (Spain). Inst. de Ciencias de la Construccion Eduardo Torroja; Reynoso, V.C.S. [Universidade Estadual Paulista (FEIS/UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia

    2009-07-01

    This study analyses the crystallization of glasses obtained from two samples of sugarcane bagasse ash - SCBA (named Cinza 07 and Cinza 08) mixed with carbonates (calcium and potassium). The glasses and their crystallization were examined using differential thermal analysis (DTA), X-ray fluorescence (XRF) and X-ray diffraction (XRD). The characterizations of the ashes show that they consist mainly of crystalline materials, predominantly quartz, with iron, potassium and aluminum oxides as minor elements. For the sample Cinza07 the DTA data presents broad and overlaid crystallization peaks, indicating crystallization of more than two different phases. The DTA results of samples with different grain-size distribution show that the crystallization peak intensities increase as the sample grain-size decreases, suggesting that surface crystallization actively participate on the mechanism of crystallization. For the sample Cinza 08 the DTA data presents two well defined peaks. In this case, the more intense peak was evaluated to obtain kinetic data (Eat= 355 kJ/mol) to the major phase (Wollastonita). (author)

  20. Glass-ceramic material of the Si-Ca-K system sintered from sugarcane bagasse ash

    International Nuclear Information System (INIS)

    Teixeira, S.R.; Silva, R.A.; Santos, G.C.; Santos, G.T.A.; Romero, M.; Rincon, J.Ma.; Reynoso, V.C.S.

    2009-01-01

    This study analyses the crystallization of glasses obtained from two samples of sugarcane bagasse ash - SCBA (named Cinza 07 and Cinza 08) mixed with carbonates (calcium and potassium). The glasses and their crystallization were examined using differential thermal analysis (DTA), X-ray fluorescence (XRF) and X-ray diffraction (XRD). The characterizations of the ashes show that they consist mainly of crystalline materials, predominantly quartz, with iron, potassium and aluminum oxides as minor elements. For the sample Cinza07 the DTA data presents broad and overlaid crystallization peaks, indicating crystallization of more than two different phases. The DTA results of samples with different grain-size distribution show that the crystallization peak intensities increase as the sample grain-size decreases, suggesting that surface crystallization actively participate on the mechanism of crystallization. For the sample Cinza 08 the DTA data presents two well defined peaks. In this case, the more intense peak was evaluated to obtain kinetic data (Eat= 355 kJ/mol) to the major phase (Wollastonita). (author)

  1. Immunogenicity study to investigate the interchangeability among three different types of polio vaccine: A cohort study in Japan.

    Science.gov (United States)

    Ohfuji, Satoko; Ito, Kazuya; Ishibashi, Motoki; Shindo, Shizuo; Takasaki, Yoshio; Yokoyama, Takashi; Yokoyama, Takato; Yamashita, Yuji; Shibao, Keigo; Nakano, Takashi; Tsuru, Tomomi; Irie, Shin; Hirota, Yoshio

    2017-06-01

    In Japan, the routine immunization program with oral polio vaccine (OPV) has been suspended since September 2012, when a program with 4 doses of inactivated monovalent polio vaccine (IPV) or quadrivalent vaccine against diphtheria, pertussis, and tetanus with IPV (DTaP-IPV) was introduced. The aim of this study was to examine the interchangeability among these 3 types of polio vaccines.We conducted a prospective cohort study at 5 pediatric clinics in Japan. A total of 153 infants were assigned to 1 of the 4 groups by considering the vaccination history of OPV and trivalent vaccine against DTaP. Eleven infants with a history of OPV received 3 doses of DTaP-IPV; 49 infants with a history of OPV and DTaP received 3 doses of IPV; 50 polio vaccine-naïve infants received 2 doses of IPV followed by 2 doses of DTaP-IPV; and 43 polio vaccine-naive infants received 2 doses of DTaP-IPV followed by IPV. The immunogenicity after polio vaccination was evaluated among these 4 groups.After 2 doses of polio vaccination, more than 80% of the infants exhibited a neutralization antibody titer ≥1:8 for all Sabin strains and wild strains in all groups. After the third dose, the seroprotection proportion (i.e., a neutralization antibody titer ≥1:8) reached about 100%. After the fourth dose, a neutralization antibody titer exceeded the required protective levels (i.e., a neutralization antibody titer ≥1:8) considerably in all groups.Four doses of polio vaccines induced a sufficient level of immunity in Japanese infants, irrespective of vaccine combinations or order.

  2. Immunogenicity and Safety of a Booster Injection of DTap-IPV//Hib (Pentaxim) Administered Concomitantly With Tetravalent Dengue Vaccine in Healthy Toddlers 15-18 Months of Age in Mexico: A Randomized Trial.

    Science.gov (United States)

    Melo, Flor Irene Rodriguez; Morales, José Juan Renteria; De Los Santos, Abiel Homero Mascareñas; Rivas, Enrique; Vigne, Claire; Noriega, Fernando

    2017-06-01

    The live, attenuated, tetravalent dengue vaccine (CYD-TDV) is licensed in a number of dengue endemic countries for individuals ≥9 years of age. Before the integration of any vaccine into childhood vaccination schedules, a lack of immune interference and acceptable safety when coadministered with other recommended vaccines should be demonstrated. This randomized, multi-center phase III trial was conducted in Mexico. Healthy toddlers (n = 732) received a booster dose of a licensed pentavalent combination vaccine [diphtheria, tetanus, acellular pertussis, inactivated polio vaccine and Haemophilus influenzae type b (DTaP-IPV//Hib)] either concomitantly or sequentially, with the second dose of CYD-TDV administered as a 3-dose schedule. Antibody titers against diphtheria toxoid, tetanus toxoid and pertussis antigens were measured by enzyme-linked immunosorbent assay. Antibodies against poliovirus and dengue serotypes were measured using a plaque reduction neutralization test. Noninferiority was demonstrated for each of the DTaP-IPV//Hib antigens if the lower limit of the 2-sided 95% confidence interval of the difference in seroconversion rates between the 2 groups (CYD-TDV and placebo) was ≥10%. Safety of both vaccines was assessed. Noninferiority in immune response was demonstrated for all DTaP-IPV//Hib antigens. After 3 doses of CYD-TDV, no difference was observed in the immune response for CYD-TDV between groups. There were no safety concerns during the study. Coadministration of the DTaP-IPV//Hib booster vaccine with CYD-TDV has no observed impact on the immunogenicity or safety profile of the DTaP-IPV//Hib booster vaccine. No difference was observed on the CYD-TDV profile when administered concomitantly or sequentially with the DTaP-IPV//Hib booster vaccine.

  3. Risk of Febrile Seizures and Epilepsy After Vaccination With Diphtheria, Tetanus, Acellular Pertussis, Inactivated Poliovirus, and Haemophilus Influenzae Type b

    DEFF Research Database (Denmark)

    Sun, Yuelian; Christensen, Jakob Christensen; Hviid, Anders

    2012-01-01

    -acellular pertussis–inactivated poliovirus– Haemophilus influenzae type b (DTaP-IPV-Hib) vaccine since September 2002. Objective To estimate the risk of febrile seizures and epilepsy after DTaP-IPV-Hib vaccination given at 3, 5, and 12 months. Design, Setting, and Participants A population-based cohort study of 378...

  4. Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

    Science.gov (United States)

    Holmes, Manford L.

    This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

  5. Hydration–dehydration behavior and thermodynamics of MX-80 montmorillonite studied using thermal analysis

    Energy Technology Data Exchange (ETDEWEB)

    Tajeddine, L. [CNRS-IC2MP-UMR- Hydrasa, 5 Ave Albert, Turpain, (France); Gailhanou, H.; Blanc, P.; Lassin, A.; Gaboreau, S. [BRGM, 3 Av. Claude Guillemin, BP6009, Orléans F-45060 (France); Vieillard, P., E-mail: philippe.vieillard@univ-poitiers.fr [CNRS-IC2MP-UMR- Hydrasa, 5 Ave Albert, Turpain, (France)

    2015-03-20

    Highlights: • Adsorption–desorption of water on MX-80 is determined from TGA and DTA analysis. • From DTA analysis, three types of water behavior exist at various hydration states. • Surface area of DTA allows to determine the dehydration enthalpy per mole of water. • A maximum enthalpy is 12 kJ/mol for the adsorption and desorption processes. • Enthalpy of formation of water for adsorption and desorption processes are provided. - Abstract: The thermal dehydration of natural bentonite clay MX-80 chosen as a possible future backfill material, was investigated using thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The aim of this work is to provide a better understanding of the thermodynamics of the hydration–dehydration process of MX-80. The data obtained from thermogravimetry derivative curves at different relative humidities were used to determine the adsorption–desorption isotherm of MX-80. The total amount of water varies from 0.35 to 5.62 and from 0.78 to 6.12 mol adsorbed H{sub 2}O/mol of clay upon adsorption and desorption, respectively, for a RH between 11 and 91%. Furthermore, the heats released upon adsorption and desorption are not completely similar. Moreover, the analysis of DTA signals obtained at various hydration states provides insights about three types of water behavior in MX-80. Therefore, the surface area of DTA curves was taken into account to determine the dehydration enthalpy per mole of water; the values do not correlate with the amount of adsorbed water in MX-80, and the maximum enthalpy was approximately 12 kJ/mol for the adsorption and desorption studies. The values obtained were combined with the standard enthalpies of the formation of liquid water to obtain the corresponding enthalpy of the formation of water relative to dehydrated MX-80.

  6. A New Platform for Profiling Degradation-Related Impurities Via Exploiting the Opportunities Offered by Ion-Selective Electrodes: Determination of Both Diatrizoate Sodium and Its Cytotoxic Degradation Product.

    Science.gov (United States)

    Riad, Safaa M; Abd El-Rahman, Mohamed K; Fawaz, Esraa M; Shehata, Mostafa A

    2018-05-01

    Although the ultimate goal of administering active pharmaceutical ingredients (APIs) is to save countless lives, the presence of impurities and/or degradation products in APIs or formulations may cause harmful physiological effects. Today, impurity profiling (i.e., the identity as well as the quantity of impurity in a pharmaceutical) is receiving critical attention from regulatory authorities. Despite the predominant use of spectroscopic and chromatographic methods over electrochemical methods for impurity profiling of APIs, this work investigates the opportunities offered by electroanalytical methods, particularly, ion-selective electrodes (ISEs), for profiling degradation-related impurities (DRIs) compared with conventional spectroscopic and chromatographic methods. For a meaningful comparison, diatrizoate sodium (DTA) was chosen as the anionic X-ray contrast agent based on its susceptibility to deacetylation into its cytotoxic and mutagenic degradation product, 3,5-diamino-2,4,6 triiodobenzoic acid (DTB). This cationic diamino compound can be also detected as an impurity in the final product because it is used as a synthetic precursor for the synthesis of DTA. In this study, four novel sensitive and selective sensors for the determination of both DTA and its cytotoxic degradation products are presented. Sensors I and II were developed for the determination of the anionic drug, DTA, and sensors III and IV were developed for the determination of the cationic cytotoxic impurity. The use of these novel sensors not only provides a stability-indicating method for the selective determination of DTA in the presence of its degradation product, but also permits DRI profiling. Moreover, a great advantage of these proposed ISE systems is their higher sensitivity for the quantification of DTB relative to other spectroscopic and chromatographic methods, so it can measure trace amounts of DTB impurities in DTA bulk powder and pharmaceutical formulation without a need for

  7. Structural, dielectric and multiferroic properties of Er and La ...

    Indian Academy of Sciences (India)

    Administrator

    Laser Materials Development & Devices Division, Raja Ramanna Centre for Advanced ... enhancing the electrical and magnetic properties of BFO. ... fraction data was carried out using refinement software ... out using DTA (SETARAM model No TG/DTA-92B) to ..... in BLEFOx=0⋅05,0.07,0⋅1 is due to collapse of spiral spin.

  8. Aquatic risk assessment of the new rice herbicide profoxydim

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Paloma [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)]. E-mail: arguello@inia.es; Kubitza, Johanna [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Peter Dohmen, G. [BASF-AG, Agricultural Center Limburgerhof, P.O. Box 120, D-67114 Limburgerhof (Germany); Tarazona, Jose V. [Laboratory for Ecotoxicology, Department of the Environment, INIA, Crta De La Coruna Km 7, 28040 Madrid (Spain)

    2006-07-15

    A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required.

  9. Aquatic risk assessment of the new rice herbicide profoxydim

    International Nuclear Information System (INIS)

    Sanchez, Paloma; Kubitza, Johanna; Peter Dohmen, G.; Tarazona, Jose V.

    2006-01-01

    A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance. - Risk refinement assessment of rice pesticides starting with DTA and moving to community studies is a cost-effective approach, only if required

  10. Role of thermal analysis in uranium oxide fuel fabrication process

    International Nuclear Information System (INIS)

    Balaji Rao, Y.; Yadav, R.B.

    2006-01-01

    The present paper discusses the application of thermal analysis, particularly, differential thermal analysis (Dta) at various stages of fuel fabrication process. The useful role of Dta in knowing the decomposition pattern and calcination temperature of Adu along with de-nitration temperature is explained. The decomposition pattern depends upon the type of drying process adopted for wet ADU cake (ADU C). Also, the paper highlights the utility of DTA in determining the APS and SSA of UO 2+x and U 3 O 8 powders as an alternate technique. Further, the temperature difference (ΔT max ) between the two exothermic peaks obtained in UO 2+x powder oxidation is related to sintered density of UO 2 pellets. (author)

  11. Dynamic Assessment and Response to Intervention: Two Sides of One Coin

    Science.gov (United States)

    Grigorenko, Elena L.

    2009-01-01

    This article compares and contrasts the main features of dynamic testing and assessment (DT/A) and response to intervention (RTI). The comparison is carried out along the following lines: (a) historical and empirical roots of both concepts, (b) premises underlying DT/A and RTI, (c) terms used in these concepts, (d) use of these concepts, (e)…

  12. Estimating the Life Expectancy of Facilities

    Science.gov (United States)

    1974-04-01

    44160 Radioactive Storage Warehouse 44180 Open Warehouse Facility 44181 Vehicle Storage Facility 44190 Storage-Covered-Depot and Arsenal--Other 44210...state is 23 23, 14 O0 14 9 224 .467 .400 .133 .6w .,determined in the form of the observation matrix: 67 0 12J 3 2 . 5 V = lyr Dta PoitS Dta Polut 6V 1

  13. Thermal decomposition of lanthanides (III) and yttrium (III) solid complexes from ethyl ene diamine tetraacetic acid

    International Nuclear Information System (INIS)

    Mercadante, A.

    1991-01-01

    Solid state compounds of lanthanides (III) and yttrium derived from ethyl ene diamine tetraacetic acid were prepared from respective basic carbonates, that were neutralized with EDTA stoichiometry quantities. Complexometry with EDTA, thermogravimetry (TG), differential thermal analysis (DTA) and X-ray diffraction have been used in the study of these compounds. The results of complexometry with EDTA as well as TG and DTA curves bed to the stoichiometry of these compounds the following general formula is obeyed: H[Ln(EDTA]. n H 2 O. X-ray powder patterns of these compounds permitted to establish two isomorphous series. The DTA ant TG curves allowed us to study the dehydration process, the thermal stability and thermal decomposition of these compounds. (C.G.C.)

  14. Copper-Based Metal-Organic Porous Materials for CO2 Electrocatalytic Reduction to Alcohols.

    Science.gov (United States)

    Albo, Jonathan; Vallejo, Daniel; Beobide, Garikoitz; Castillo, Oscar; Castaño, Pedro; Irabien, Angel

    2017-03-22

    The electrocatalytic reduction of CO 2 has been investigated using four Cu-based metal-organic porous materials supported on gas diffusion electrodes, namely, (1) HKUST-1 metal-organic framework (MOF), [Cu 3 (μ 6 -C 9 H 3 O 6 ) 2 ] n ; (2) CuAdeAce MOF, [Cu 3 (μ 3 -C 5 H 4 N 5 ) 2 ] n ; (3) CuDTA mesoporous metal-organic aerogel (MOA), [Cu(μ-C 2 H 2 N 2 S 2 )] n ; and (4) CuZnDTA MOA, [Cu 0.6 Zn 0.4 (μ-C 2 H 2 N 2 S 2 )] n . The electrodes show relatively high surface areas, accessibilities, and exposure of the Cu catalytic centers as well as favorable electrocatalytic CO 2 reduction performance, that is, they have a high efficiency for the production of methanol and ethanol in the liquid phase. The maximum cumulative Faradaic efficiencies for CO 2 conversion at HKUST-1-, CuAdeAce-, CuDTA-, and CuZnDTA-based electrodes are 15.9, 1.2, 6, and 9.9 %, respectively, at a current density of 10 mA cm -2 , an electrolyte-flow/area ratio of 3 mL min cm -2 , and a gas-flow/area ratio of 20 mL min cm -2 . We can correlate these observations with the structural features of the electrodes. Furthermore, HKUST-1- and CuZnDTA-based electrodes show stable electrocatalytic performance for 17 and 12 h, respectively. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Stability indicating spectrophotometric and spectrodensitometric methods for the determination of diatrizoate sodium in presence of its degradation product

    Science.gov (United States)

    Abd El-Rahman, Mohamed K.; Riad, Safaa M.; Abdel Gawad, Sherif A.; Fawaz, Esraa M.; Shehata, Mostafa A.

    2015-02-01

    Three sensitive, selective, and precise stability indicating methods for the determination of the X-ray contrast agent, diatrizoate sodium (DTA), in the presence of its acidic degradation product (highly cytotoxic 3,5 diamino metabolite) and in pharmaceutical formulation were developed and validated. The first method is a first derivative (D1) spectrophotometric one, which allows the determination of DTA in the presence of its degradate at 231.2 nm (corresponding to zero crossing of the degradate) over a concentration range of 2-24 μg/mL with mean percentage recovery 99.95 ± 0.97%. The second method is the first derivative of the ratio spectra (DD1) by measuring the peak amplitude at 227 nm over the same concentration range as D1 spectrophotometric method, with mean percentage recovery 99.99 ± 1.15%. The third method is a TLC-densitometric one, where DTA was separated from its degradate on silica gel plates using chloroform:methanol:ammonium hydroxide (20:10:2 by volume) as a developing system. This method depends on quantitative densitometric evaluation of thin layer chromatogram of DTA at 238 nm over a concentration range of 4-20 μg/spot, with mean percentage recovery 99.88 ± 0.89%. The selectivity of the proposed methods was tested using laboratory-prepared mixtures. The proposed methods have been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives. The results were statistically compared with the official US pharmacopeial method. No significant difference for either accuracy or precision was observed.

  16. KINETIKA REAKSI SINTHESIS BIOMATERIAL HIDROXYAPATITE DENGAN JENIS PREKURSOR NITRAT DAN ASETAT

    Directory of Open Access Journals (Sweden)

    Adhi Setiawan

    2014-12-01

    Full Text Available Hidroxyapatite (HAp merupakan salah satu biomaterial yang banyak diaplikasikan dalam dunia medis untuk membuat implant jaringan tubuh terutama tulang dan gigi sehingga kemurnian produk HAp memegang peranan yang cukup penting. Agar diperoleh HAp dengan kemurnian tinggi, kinetika reaksi pembentukan HAp harus diketahui secara jelas. Metode yang digunakan untuk memperoleh kinetika reaksi HAp adalah dengan analisis TG-DTA  yang dilakukan pada dua jenis prekursor HAp yaitu asetat dan nitrat. Metode TG-DTA tersebut dilakukan dengan memanaskan prekursor HAp dengan variasi laju pemanasan 10, 15, 17, dan 20 oC/menit. Hasil analisis TG-DTA menunjukkan bahwa reaksi dekomposisi prekursor asetat dan nitrat membentuk HAp masing-masing terjadi pada suhu 659 oC dan 560 oC. Hasil fitting parameter kinetika menunjukkan bahwa energi aktivasi pembentukan HAp pada prekursor asetat sebesar 161,56 kJ/mol  dengan model kinetika Normal Grain Growth sedangkan pada prekursor nitrat sebesar 374 kJ/mol dengan model kinetika Johnson-Mehl-Avrami. Kata kunci: Biomaterial, hidroxypapatite, Dekomposisi, Energi Aktivasi ABSTRACT KINETIC STUDY OF THE BIOMATERIAS HIDOXYAPATITE SINTHESIS WITH PRECURSOR NITRATE AND  ACETATE. Hidroxyapatite (HAp is one of the biomaterials widely applied in the medical world to make implant tissues of the body, especially bones and teeth so that the purity of the HAp plays a fairly important. In order to obtain high purity HAp, reaction kinetics should be known clearly. TG-DTA  is method used to obtain the reaction kinetics of HAp.TG-DTA analyzes were conducted on precursors acetate and nitrate. TG-DTA method is carried out by heating HAp precursor with variation heating rate 10, 15, 17, and 20° C/min respectively. The results of TG-DTA  showed decomposition precursor acetate and nitrate formed HAp occurs on temperature 659° C and 560° C respectively. The results of the fitting kinetic showed activation energy of  the HAp formation on acetate

  17. ADVERSE EVENTS POST-DTAP AND DTwP VACCINATION IN THAI CHILDREN.

    Science.gov (United States)

    Fortuna, Librada; Sirivichayakul, Chukiat; Watanaveeradej, Veerachai; Soonthornworasiri, Ngamphol; Sitcharungsi, Raweerat

    2015-07-01

    We conducted a prospective study to compare the development of fever (axillary T ≥ 37.9 °C) within 4 hours of vaccination, determine the proportion of children who develop high fever (T ≥ 39°C) and evaluate parental days missed from work due to their children's vaccination with either the diphtheria-tetanus-whole cell pertussis (DTwP) or diphtheria-tetanus-acellular pertussis (DTaP) vaccine. The results of this study can help physicians and parents decide whether to have their child vaccinated with the DTwP or more expensive DTaP vaccine. We studied 140 healthy Thai children aged 2 months to 6 years from December 2011 to March 2012 who presented for vaccination. Parents recorded their child's temperature, local and systemic adverse reactions and missed days from work due to these adverse events on a diary card. Of the 140 participants, 72 received the DTwP vaccine and 68 received the DTaP vaccine. The median (IQR) age was 4 (2-6) months and the median weight was 7.1 (5.6-8.7) kg. Twenty children developed fever (axillary T ≥ 37.9°C) within 4 hours following vaccination, 17 (23.6%) had received the DTwP vaccine and 3 (4.4%) had received the DTaP vaccine (p = 0.040). One child (1.4%) who had received the DTwP vaccine and none who received the DTaP vaccine developed high fever (T ≥ 39°C) within 4 hours of vaccination (p = 0.329). Parents of two children who received the DTwP vaccine and one child who received the DTaP vaccine missed work following vaccination (p = 0.059). In conclusion, children who received the DTwP vaccines were more likely to have early post-vaccination fever and higher fever but there was no significant difference between the two groups in parental days lost from work.

  18. A new mouse model for renal lesions produced by intravenous injection of diphtheria toxin A-chain expression plasmid

    Directory of Open Access Journals (Sweden)

    Nakamura Shingo

    2004-04-01

    Full Text Available Abstract Background Various animal models of renal failure have been produced and used to investigate mechanisms underlying renal disease and develop therapeutic drugs. Most methods available to produce such models appear to involve subtotal nephrectomy or intravenous administration of antibodies raised against basement membrane of glomeruli. In this study, we developed a novel method to produce mouse models of renal failure by intravenous injection of a plasmid carrying a toxic gene such as diphtheria toxin A-chain (DT-A gene. DT-A is known to kill cells by inhibiting protein synthesis. Methods An expression plasmid carrying the cytomegalovirus enhancer/chicken β-actin promoter linked to a DT-A gene was mixed with lipid (FuGENE™6 and the resulting complexes were intravenously injected into adult male B6C3F1 mice every day for up to 6 days. After final injection, the kidneys of these mice were sampled on day 4 and weeks 3 and 5. Results H-E staining of the kidney specimens sampled on day 4 revealed remarkable alterations in glomerular compartments, as exemplified by mesangial cell proliferation and formation of extensive deposits in glomerular basement membrane. At weeks 3 and 5, gradual recovery of these tissues was observed. These mice exhibited proteinuria and disease resembling sub-acute glomerulonephritis. Conclusions Repeated intravenous injections of DT-A expression plasmid DNA/lipid complex caused temporary abnormalities mainly in glomeruli of mouse kidney. The disease in these mice resembles sub-acute glomerulonephritis. These DT-A gene-incorporated mice will be useful as animal models in the fields of nephrology and regenerative medicine.

  19. Conditional ablation of orexin/hypocretin neurons: a new mouse model for the study of narcolepsy and orexin system function.

    Science.gov (United States)

    Tabuchi, Sawako; Tsunematsu, Tomomi; Black, Sarah W; Tominaga, Makoto; Maruyama, Megumi; Takagi, Kazuyo; Minokoshi, Yasuhiko; Sakurai, Takeshi; Kilduff, Thomas S; Yamanaka, Akihiro

    2014-05-07

    The sleep disorder narcolepsy results from loss of hypothalamic orexin/hypocretin neurons. Although narcolepsy onset is usually postpubertal, current mouse models involve loss of either orexin peptides or orexin neurons from birth. To create a model of orexin/hypocretin deficiency with closer fidelity to human narcolepsy, diphtheria toxin A (DTA) was expressed in orexin neurons under control of the Tet-off system. Upon doxycycline removal from the diet of postpubertal orexin-tTA;TetO DTA mice, orexin neurodegeneration was rapid, with 80% cell loss within 7 d, and resulted in disrupted sleep architecture. Cataplexy, the pathognomic symptom of narcolepsy, occurred by 14 d when ∼5% of the orexin neurons remained. Cataplexy frequency increased for at least 11 weeks after doxycycline. Temporary doxycycline removal followed by reintroduction after several days enabled partial lesion of orexin neurons. DTA-induced orexin neurodegeneration caused a body weight increase without a change in food consumption, mimicking metabolic aspects of human narcolepsy. Because the orexin/hypocretin system has been implicated in the control of metabolism and addiction as well as sleep/wake regulation, orexin-tTA; TetO DTA mice are a novel model in which to study these functions, for pharmacological studies of cataplexy, and to study network reorganization as orexin input is lost.

  20. Do dual-thread orthodontic mini-implants improve bone/tissue mechanical retention?

    Science.gov (United States)

    Lin, Yang-Sung; Chang, Yau-Zen; Yu, Jian-Hong; Lin, Chun-Li

    2014-12-01

    The aim of this study was to understand whether the pitch relationship between micro and macro thread designs with a parametrical relationship in a dual-thread mini-implant can improve primary stability. Three types of mini-implants consisting of single-thread (ST) (0.75 mm pitch in whole length), dual-thread A (DTA) with double-start 0.375 mm pitch, and dual-thread B (DTB) with single-start 0.2 mm pitch in upper 2-mm micro thread region for performing insertion and pull-out testing. Histomorphometric analysis was performed in these specimens in evaluating peri-implant bone defects using a non-contact vision measuring system. The maximum inserted torque (Tmax) in type DTA was found to be the smallest significantly, but corresponding values found no significant difference between ST and DTB. The largest pull-out strength (Fmax) in the DTA mini-implant was found significantly greater than that for the ST mini-implant regardless of implant insertion orientation. Mini-implant engaged the cortical bone well as observed in ST and DTA types. Dual-thread mini-implant with correct micro thread pitch (parametrical relationship with macro thread pitch) in the cortical bone region can improve primary stability and enhanced mechanical retention.

  1. Characterization behavior of some polymeric composite ion exchangers

    International Nuclear Information System (INIS)

    El-Zahhar, A.A; Ahdel-Aziz, H.M.; Siyam, T.

    2005-01-01

    Polymeric composite resins were prepared by template polymerization process in aqueous solution. Thermogravimetric analysis (TGA), differential thermal analysis (DTA) and The X-ray diffraction patterns (XRD) were performed to evaluate the physico chemical properties of the different polymeric composite resins. The TGA and DTA clarify high thermal stability of prepared polymeric composite resins. XRD of prepared polymeric composite shows that there is crystalline structure of some resins while other are amorphous one

  2. Systematic review of reporting rates of adverse events following immunization: an international comparison of post-marketing surveillance programs with reference to China.

    Science.gov (United States)

    Guo, Biao; Page, Andrew; Wang, Huaqing; Taylor, Richard; McIntyre, Peter

    2013-01-11

    China is the most populous country in the world, with an annual birth cohort of approximately 16 million, requiring an average of 500 million vaccine doses administered annually. In China, over 30 domestic and less than 10 overseas vaccine manufacturers supply over 60 licensed vaccine products, representing a growing vaccine market mainly due to recent additions to the national immunization schedule, but data on post-marketing surveillance for adverse events following immunization (AEFI) are sparse. To compare reporting rates for various categories of AEFI from China with other routine post-marketing surveillance programs internationally. Systematic review of published studies reporting rates of AEFI by vaccine, category of reaction and age from post-marketing surveillance systems in English and Chinese languages. Overall AEFI reporting rates (all vaccines, all ages) in Chinese studies were consistent with those from similar international studies elsewhere, but there was substantial heterogeneity in regional reporting rates in China (range 2.3-37.8/100,000 doses). The highest AEFI reporting rates were for diphtheria-tetanus-pertussis whole-cell (DTwP) and acellular (DTaP) vaccines (range 3.3-181.1/100,000 doses for DTwP; range 3.5-92.6/100,000 doses for DTaP), with higher median rates for DTwP than DTaP, and higher than expected rates for DTaP vaccine. Similar higher rates for DTwP and DTaP containing vaccines, and relatively lower rates for vaccines against hepatitis B virus, poliovirus, and Japanese encephalitis virus were found in China and elsewhere in the world. Overall AEFI reporting rates in China were consistent with similar post-marketing surveillance systems in other countries. Sources of regional heterogeneity in AEFI reporting rates, and their relationships to differing vaccine manufacturers versus differing surveillance practices, require further exploration. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. New and improved method of investigation using thermal tools for characterization of cellulose from eucalypts pulp

    Energy Technology Data Exchange (ETDEWEB)

    Lengowski, Elaine Cristina, E-mail: elainelengowski@yahoo.com.br [Laboratório de Anatomia e Qualidade da Madeira – LANAQM, Departamento de Engenharia e Tecnologia Florestal – DETF/Universidade Federal do Paraná, (UFPR), Curitiba, PR (Brazil); Magalhães, Washington Luiz Esteves, E-mail: washington.magalhaes@embrapa.br [Embrapa Florestas, Estrada da Ribeira km 111 P.O. Box 319, 83411-000 Colombo, PR (Brazil); Programa de Pós Graduação em Engenharia de Materiais – PIPE Universidade Federal do Paraná, (UFPR), Curitiba, PR (Brazil); Nisgoski, Silvana, E-mail: silnis@yahoo.com [Laboratório de Anatomia e Qualidade da Madeira – LANAQM, Departamento de Engenharia e Tecnologia Florestal – DETF/Universidade Federal do Paraná, (UFPR), Curitiba, PR (Brazil); Muniz, Graciela Inês Bolzon de, E-mail: graciela.ufpr@gmail.com [Laboratório de Anatomia e Qualidade da Madeira – LANAQM, Departamento de Engenharia e Tecnologia Florestal – DETF/Universidade Federal do Paraná, (UFPR), Curitiba, PR (Brazil); Satyanarayana, Kestur Gundappa [Embrapa Florestas, Estrada da Ribeira km 111 P.O. Box 319, 83411-000 Colombo, PR (Brazil); Lazzarotto, Marcelo, E-mail: marcelo.lazzarotto@embrapa.br [Embrapa Florestas, Estrada da Ribeira km 111 P.O. Box 319, 83411-000 Colombo, PR (Brazil)

    2016-08-20

    Highlights: • Cellulose was treated to modify its crystallinity. • Cellulose was characterized by X-ray diffraction to evaluate Segal’s index. • TGA and DTA with chemometric tools were used to predict Segal’s index. • MLR model was applied to predict XRD cellulose Segal’s index from TGA curves. • MLR model was applied to predict XRD cellulose Segal’s index from DTA curves. - Abstract: Despite cellulose being the most abundant biopolymer on earth and an important commodity, there is a lack of deeper knowledge about its structure as well as faster and more efficient characterization techniques. This paper presents preparation of nanocellulose from bleached cellulose pulp of Eucalyptus by chemical and mechanical pre-treatments, while the cellulose was given treatment to obtain a great range of crystallinity index. The nanocellulose is characterized by X-ray diffraction to evaluate Segal’s index while chemometric tools by TGA and DTA were used to predict Segal’s index. DTA curves, along with multivariate statistical model, presented better result than TGA. The coefficient of variation and standard error of prediction for the proposed models using external validation samples were in the range of 0.91–0.96 and 4.18–8.71, respectively. These successful mathematical models are discussed by correlating them with the observed characteristics of cellulose.

  4. New and improved method of investigation using thermal tools for characterization of cellulose from eucalypts pulp

    International Nuclear Information System (INIS)

    Lengowski, Elaine Cristina; Magalhães, Washington Luiz Esteves; Nisgoski, Silvana; Muniz, Graciela Inês Bolzon de; Satyanarayana, Kestur Gundappa; Lazzarotto, Marcelo

    2016-01-01

    Highlights: • Cellulose was treated to modify its crystallinity. • Cellulose was characterized by X-ray diffraction to evaluate Segal’s index. • TGA and DTA with chemometric tools were used to predict Segal’s index. • MLR model was applied to predict XRD cellulose Segal’s index from TGA curves. • MLR model was applied to predict XRD cellulose Segal’s index from DTA curves. - Abstract: Despite cellulose being the most abundant biopolymer on earth and an important commodity, there is a lack of deeper knowledge about its structure as well as faster and more efficient characterization techniques. This paper presents preparation of nanocellulose from bleached cellulose pulp of Eucalyptus by chemical and mechanical pre-treatments, while the cellulose was given treatment to obtain a great range of crystallinity index. The nanocellulose is characterized by X-ray diffraction to evaluate Segal’s index while chemometric tools by TGA and DTA were used to predict Segal’s index. DTA curves, along with multivariate statistical model, presented better result than TGA. The coefficient of variation and standard error of prediction for the proposed models using external validation samples were in the range of 0.91–0.96 and 4.18–8.71, respectively. These successful mathematical models are discussed by correlating them with the observed characteristics of cellulose.

  5. On the Toxicity of the Aromatic Diamines and their Tetramethylcarboxylic Acid Derivatives

    OpenAIRE

    Gili, Pedro; Mederos, Alfredo

    2000-01-01

    The use of the theoretical PALLAS 3.0 program, to study the toxic behaviour of tetramethylcarboxylic acids, potential pharmaceuticals derived from o-phenylenediamines, indicates that o-phenylenediamines are highly toxic (level 1), while the tetramethycarboxylic acid derivatives (o-PhDTA and 3,4-TDTA) are slightly toxic, similar to EDTA (level 3). Therefore these ligands o-PhDTA and 3,4-TDTA, similar to EDTA, can be used as sequestering agents of toxic metals and overload of essential metals i...

  6. Absorption characteristics of Kupravas deposit clays modified by phosphoric acid

    International Nuclear Information System (INIS)

    Ruplis, A.; Mezinskis, G.; Chaghuri, M.

    1998-01-01

    Literature data suggested that clays may be used as sorbents for waste water treatment. The surface and sorption properties of minerals changes due to the influence of acid rains. The process of recession of clay properties has been modeled in laboratory by treatment of clays with mineral acids at higher temperature that in natural conditions. The present paper is devoted to the study of influence of phosphoric acid on the sorption properties of Kupravas deposit clays. Natural clay samples and samples treated with phosphoric acid were characterized by means of x-ray diffraction an differential thermal analysis (DTA) methods These methods were used also to identify the sample of Lebanese clays. X-ray diffraction analysis data show that the samples of clays from the deposit of Kuprava contain illite and kaolinite while sample of Lebanese clay contains quartz, calcite, and montmorillonite. DTA results show characteristic features of Kuprava clays described in reference with DTA of Lebanese clay clearly demonstrate the presence of large quantity of calcite

  7. Semicarbazone EGA Inhibits Uptake of Diphtheria Toxin into Human Cells and Protects Cells from Intoxication

    Directory of Open Access Journals (Sweden)

    Leonie Schnell

    2016-07-01

    Full Text Available Diphtheria toxin is a single-chain protein toxin that invades human cells by receptor-mediated endocytosis. In acidic endosomes, its translocation domain inserts into endosomal membranes and facilitates the transport of the catalytic domain (DTA from endosomal lumen into the host cell cytosol. Here, DTA ADP-ribosylates elongation factor 2 inhibits protein synthesis and leads to cell death. The compound 4-bromobenzaldehyde N-(2,6-dimethylphenylsemicarbazone (EGA has been previously shown to protect cells from various bacterial protein toxins which deliver their enzymatic subunits from acidic endosomes to the cytosol, including Bacillus anthracis lethal toxin and the binary clostridial actin ADP-ribosylating toxins C2, iota and Clostridium difficile binary toxin (CDT. Here, we demonstrate that EGA also protects human cells from diphtheria toxin by inhibiting the pH-dependent translocation of DTA across cell membranes. The results suggest that EGA might serve for treatment and/or prevention of the severe disease diphtheria.

  8. The intersection of the extrinsic hedgehog and WNT/wingless signals with the intrinsic Hox code underpins branching pattern and tube shape diversity in the drosophila airways.

    Directory of Open Access Journals (Sweden)

    Ryo Matsuda

    2015-01-01

    Full Text Available The tubular networks of the Drosophila respiratory system and our vasculature show distinct branching patterns and tube shapes in different body regions. These local variations are crucial for organ function and organismal fitness. Organotypic patterns and tube geometries in branched networks are typically controlled by variations of extrinsic signaling but the impact of intrinsic factors on branch patterns and shapes is not well explored. Here, we show that the intersection of extrinsic hedgehog(hh and WNT/wingless (wg signaling with the tube-intrinsic Hox code of distinct segments specifies the tube pattern and shape of the Drosophila airways. In the cephalic part of the airways, hh signaling induces expression of the transcription factor (TF knirps (kni in the anterior dorsal trunk (DTa1. kni represses the expression of another TF spalt major (salm, making DTa1 a narrow and long tube. In DTa branches of more posterior metameres, Bithorax Complex (BX-C Hox genes autonomously divert hh signaling from inducing kni, thereby allowing DTa branches to develop as salm-dependent thick and short tubes. Moreover, the differential expression of BX-C genes is partly responsible for the anterior-to-posterior gradual increase of the DT tube diameter through regulating the expression level of Salm, a transcriptional target of WNT/wg signaling. Thus, our results highlight how tube intrinsic differential competence can diversify tube morphology without changing availabilities of extrinsic factors.

  9. Phase transformations in Higher Manganese Silicides

    Energy Technology Data Exchange (ETDEWEB)

    Allam, A. [MADIREL, UMR 7246 CNRS - Universite Aix-Marseille, av Normandie-Niemen, 13397 Marseille Cedex 20 (France); IM2NP, UMR 7334 CNRS - Universite Aix-Marseille, av Normandie-Niemen, Case 142, 13397 Marseille Cedex 20 (France); Boulet, P. [MADIREL, UMR 7246 CNRS - Universite Aix-Marseille, av Normandie-Niemen, 13397 Marseille Cedex 20 (France); Nunes, C.A. [Departamento de Engenharia de Materiais (DEMAR), Escola de Engenharia de Lorena (EEL), Universidade de Sao Paulo - USP, Caixa Postal 116, 12600-970 Lorena, Sao Paulo (Brazil); Sopousek, J.; Broz, P. [Masaryk University, Faculty of Science, Department of Chemistry, Kolarska 2, 611 37 Brno (Czech Republic); Masaryk University, Central European Institute of Technology, CEITEC, Kamenice 753/5, 625 00 Brno (Czech Republic); Record, M.-C., E-mail: m-c.record@univ-cezanne.fr [IM2NP, UMR 7334 CNRS - Universite Aix-Marseille, av Normandie-Niemen, Case 142, 13397 Marseille Cedex 20 (France)

    2013-02-25

    Highlights: Black-Right-Pointing-Pointer The phase transitions of the Higher Manganese Silicides were investigated. Black-Right-Pointing-Pointer The samples were characterised by XRD, DTA and DSC. Black-Right-Pointing-Pointer Mn{sub 27}Si{sub 47} is the stable phase at room temperature and under atmospheric pressure. Black-Right-Pointing-Pointer At around 800 Degree-Sign C, Mn{sub 27}Si{sub 47} is transformed into Mn{sub 15}Si{sub 26}. Black-Right-Pointing-Pointer The phase transition is of a second order. - Abstract: This work is an investigation of the phase transformations of the Higher Manganese Silicides in the temperature range [100-1200 Degree-Sign C]. Several complementary experimental techniques were used, namely in situ X-ray Diffraction (XRD), Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC). The evolution of both the lattice parameters and the thermal expansion coefficients was determined from in situ XRD measurements. The stability of the samples was investigated by thermal analysis (DTA) and Cp measurements (DSC). This study shows that Mn{sub 27}Si{sub 47} which is the stable phase at room temperature and under atmospheric pressure undergoes a phase transformation at around 800 Degree-Sign C. Mn{sub 27}Si{sub 47} is transformed into Mn{sub 15}Si{sub 26}. This phase transformation seems to be of a second order one. Indeed it was not evidenced by DTA and by contrast it appears on the Cp curve.

  10. [Local reactions after diphtheria-tetanus-acellular pertussis vaccines in mice; changes in histopathology at the injection site].

    Science.gov (United States)

    Nagaoka, Chiharu; Katsuta, Tomohiro; Honjo, Ayako; Tateyama, Satoshi; Tokutake, Tadaomi; Arimoto, Yutaka; Nakajima, Natsuki; Goshima, Toshiro; Kato, Tatsuo

    2006-03-01

    Diphtheria-tetanus-acellular pertussis vaccine (DTaP) developed in Japan is now widely used worldwide. DTaP is safer than the diphtheria-tetanus-whole-cell pertussis vaccine (DTwP) and has fewer severe side effects, but local reactions such as redness, swelling, and induration are still reported. The pathophysiological mechanism of these reactions is controversial. To clarify the cause of local reactions, we conducted studies using the mouse model. After administering either one or two abdominal subcutaneous DTaP inoculations, we observed changes in histopathology at the injection site at 24h, 48h, and 7 days. The control group, inoculated with physiologic saline, showed no significant changes either pathologically or with the naked eye. All mice after DTaP vaccination showed indurations at the injection site. Pathologically, we watched leukocyte invasion into or around the site, especially neutrophils and eosinophils. After the first vaccination, the extent of the invasion was strong 24h and 7 days later. At 24h following the second vaccination, a dramatic leukocyte invasion seen persisted at 7days. At 7 days after the first vaccination, peripheral fibrosis had begun, and when a second vaccination was administered, it began even earlier at the second site. These histopathological changes show that local reactions are caused by both inflammatory and allergic responses. Because this mouse study resulted in the same pattern of reactions observed in humans, this method will be useful for studies focusing on local reactions.

  11. Systematic review and meta-analysis of studies evaluating diagnostic test accuracy: A practical review for clinical researchers-Part I. general guidance and tips

    International Nuclear Information System (INIS)

    Kim, Kyung Won; Choi, Sang Hyun; Huh, Jimi; Park, Seong Ho; Lee, June Young

    2015-01-01

    In the field of diagnostic test accuracy (DTA), the use of systematic review and meta-analyses is steadily increasing. By means of objective evaluation of all available primary studies, these two processes generate an evidence-based systematic summary regarding a specific research topic. The methodology for systematic review and meta-analysis in DTA studies differs from that in therapeutic/interventional studies, and its content is still evolving. Here we review the overall process from a practical standpoint, which may serve as a reference for those who implement these methods

  12. Electric motor-transformer aggregate in hermetic objects of transport vehicles

    Science.gov (United States)

    Zabora, Igor

    2017-10-01

    The construction and features of operation for new electrical unit - electric motor-transformer aggregate (DTA) are considered. Induction motors are intended for operation in hermetic plants with extreme conditions surrounding gas, steam-to-gas and liquid environment at a high temperature (to several hundred of degrees). Main objective of spent researches is the substantiation of possibility reliable and effective electric power transform with electric machine means directly in hermetic objects with extreme conditions environment by means of new DTA. The principle and job analysis of new disk induction motors of block-module type are observed.

  13. Thermal activation and characterization of clay Brasgel aiming your application as adsorbent in removal of nickel

    International Nuclear Information System (INIS)

    Vasconcelos, P.N.M.; Sousa, A.B.; Sousa, A.K.F.; Rodrigues, M.G.F.; Laborde, H.M.

    2012-01-01

    The clays exhibit interesting properties in adsorption of heavy metals in wastewater. This property can be modified by thermal activation. In this work, the characterization of clay Brasgel before and after thermal activation (200 deg C 300 deg C 400 deg C and 500 deg C) is performed by cation exchange capacity (CEC), X-ray Spectroscopy for Energy Dispersion (EDX), X-ray diffraction (XRD) and Differential Thermal Analysis and Gravimetric (DTA / TG). The main differences between natural and activated clays are the structural changes observed by XRD and DTA / TG. (author)

  14. Active site-directed alkylation of Na+-K+-ATPase by digitalis sulphonate derivatives of different lipophilicity.

    Science.gov (United States)

    Fricke, U.; Klaus, W.; Rogatti, M.

    1981-01-01

    1 Sulphonate derivatives of k-strophanthidin and digitoxigenin were tested as active site-directed labels of Na+-K+-adenosine triphosphatase (Na+-ATPase) from guinea-pig heart. 2 Lipophilicity ranged between P = 93 for strophanthidin-3-tosyloxy-acetate (STA) and P = 3028 for digitoxigenin-3-tosyloxy-acetate (DTA). 3 Although the alkylating moiety of STA and DTA was identical, the reversibility of Na+-K+-ATPase inhibition varied appreciably (82% and 35% respectively). 4 It is concluded that lipophilicity contributes considerably to the irreversible binding of alkylating cardiotonic steroids to myocardial Na+-K+-ATPase. PMID:6261865

  15. Effects of Plant Growth Regulators (PGRs)Sprayed at R5 on the Amino Acid Components in Soybean Seeds%R5期喷施植物生长调节剂对不同品质类型大豆籽粒氨基酸组分的影响

    Institute of Scientific and Technical Information of China (English)

    宋柏权; 赵黎明; 林思宇; 冯乃杰; 杨骥; 李建英; 郑殿峰

    2012-01-01

    In field trail, three plant growth regulators( PGRs) of SOD simulations( SODM ) ,Choline chloride( Cc) and diethyl aminoethyl hexanoate( DTA-6) were sprayed on soybeans with different quality types at R5,and the amino acid components of soybean seeds were determined after harvest. SODM , Cc and DTA-6 all reduced total amino acids content for three soybean types, the decreasing amplitude was the smallest (0.50% -1.03 % ) in high protein cultivar Heinong 35 , while was the largest in high protein and high oil cultivar Kennong 4. The three PGRs changed the ratio of different amino acids for three quality type soybeans,and all improved the contents of alanine,valine,isoleucine in high protein cultivar Heinong 35.%在大田条件下,于R5期对不同品质类型大豆品种叶片喷施SOD摸拟物(SODM)、氯化胆碱(Choline chloride,Cc)和2-N,N-二乙氨基乙基己酸酯(Diethyl aminoethyl hexanoate,DTA-6)3种植物生长调节剂,成熟收获后测定籽粒中氨基酸组分含量.结果表明:SODM、Cc、DTA-6均降低了不同品种类型大豆的氨基酸总量,其中高蛋白品种黑农35氨基酸总量降幅(0.50% ~ 1.03%)最小,而双高品种垦农4号氨基酸总量降幅(2.53% ~4.67%)最大.SODM、Cc、DTA-6对不同品质类型大豆氨基酸组分比例均有影响,三者均提高了高蛋白品种黑农35的丙氨酸、缬氨酸和异亮氨酸含量.

  16. In Vivo Transfer and Microevolution of Avian Native IncA/C2blaNDM-1-Carrying Plasmid pRH-1238 during a Broiler Chicken Infection Study.

    Science.gov (United States)

    Hadziabdic, Sead; Fischer, Jennie; Malorny, Burkhard; Borowiak, Maria; Guerra, Beatriz; Kaesbohrer, Annemarie; Gonzalez-Zorn, Bruno; Szabo, Istvan

    2018-04-01

    The emergence and spread of carbapenemase-producing Enterobacteriaceae (CPE) in wildlife and livestock animals pose an important safety concern for public health. With our in vivo broiler chicken infection study, we investigated the transfer and experimental microevolution of the bla NDM-1 -carrying IncA/C 2 plasmid (pRH-1238) introduced by avian native Salmonella enterica subsp. enterica serovar Corvallis without inducing antibiotic selection pressure. We evaluated the dependency of the time point of inoculation on donor ( S Corvallis [12-SA01738]) and plasmid-free Salmonella recipient [d-tartrate-fermenting (d-Ta + ) S Paratyphi B (13-SA01617), referred to here as S Paratyphi B (d-Ta + )] excretion by quantifying their excretion dynamics. Using plasmid profiling by S1 nuclease-restricted pulsed-field gel electrophoresis, we gained insight into the variability of the native plasmid content among S Corvallis reisolates as well as plasmid acquisition in S Paratyphi B (d-Ta + ) and the enterobacterial gut microflora. Whole-genome sequencing enabled us to gain an in-depth insight into the microevolution of plasmid pRH-1238 in S Corvallis and enterobacterial recipient isolates. Our study revealed that the fecal excretion of avian native carbapenemase-producing S Corvallis is significantly higher than that of S Paratyphi (d-Ta + ) and is not hampered by S Paratyphi (d-Ta + ). Acquisition of pRH-1238 in other Enterobacteriaceae and several events of plasmid pRH-1238 transfer to different Escherichia coli sequence types and Klebsiella pneumoniae demonstrated an interspecies broad host range. Regardless of the microevolutionary structural deletions in pRH-1238, the single carbapenem resistance marker bla NDM-1 was maintained on pRH-1238 throughout the trial. Furthermore, we showed the importance of the gut E. coli population as a vector of pRH-1238. In a potential scenario of the introduction of NDM-1-producing S Corvallis into a broiler flock, the pRH-1238 plasmid could

  17. TG/DTA and X ray Diffraction Studies on Ammonium Uranyl Nitrate

    International Nuclear Information System (INIS)

    Kim, Byung Ho; Lee, Young Bum; Jeong, Ji Young; Choi, Jong Hyun; Kim, Tae Joon; Nam, Ho Yun; Kim, Jong Man

    2011-01-01

    Ammonium uranyl nitrate (AUN) is an important intermediate product during conversion of a uranyl nitrate[UO 2 (NO 3 ) 2 ] solution to UO 2 powder for the fabrication of nuclear fuels, the so-called modified direct denitration (MDD) process. The MDD process involves the thermal decomposition of AUN double salts, which are prepared from a mixture consisting of a UO 2 (NO 3 ) 2 solution and NH 4 NO 3 . The physical and chemical properties of an oxide powder depend upon its thermal treatment. Three double salts are known for the UO 2 (NO 3 ) 2 - NH 4 NO 3 -H 2 O system, but there have been only a few studies done on thermal decomposition of these salts. Therefore, the objective of this study is to investigate the reaction pathways during a thermal decomposition and reduction of AUN to achieve a better knowledge of the influence of an AUN preparation process and thermal decomposition procedures on uranium oxides under a nitrogen, air, or hydrogen atmosphere

  18. Demencia tipo Alzheimer, deterioro cognitivo y toma de decisiones

    Directory of Open Access Journals (Sweden)

    Aurora Moreno

    2011-04-01

    Full Text Available El objetivo de este trabajo es el de conocer cómo es la toma de decisiones en la Demencia Tipo Alzheimer (DTA en situaciones de incertidumbre, si se manifiesta la tendencia al riesgo o no, y la relación que guarda la ejecución con el status cognitivo en cada una de las áreas evaluadas por los test de cribado del deterioro cognitivo propios de las demencias. Participaron 10 pacientes con DTA, y comparados con 10 sujetos controles. Se utilizó la Prueba Cartas (basada en la Iowa Gambling Task, donde los sujetos deben elegir entre varias opciones que entrañan más o menos riesgo, y una batería de cribado del deterioro cognitivo. Los resultados reflejaron que los sujetos con DTA en etapas iniciales presentan cierta tendencia al riesgo en las decisiones que toman y no desarrollan patrones estratégicos de elección. Parece que el deterioro cognitivo y el grado de afectación en las distintas áreas se relaciona con la forma en que toman decisiones.

  19. Thermal decomposition kinetics of antimony oxychloride in air

    Institute of Scientific and Technical Information of China (English)

    阳卫军; 唐谟堂; 金胜明

    2002-01-01

    The DTA and XRD techniques were employed to study thermal decomposition mechanism of antimony oxychloride SbOCl in the air. The thermal decomposition reaction occurs in four steps, and the former three steps as: SbOCl(s)→Sb4O5Cl2(s)+SbCl3(g)→Sb8O11Cl2(s)+SbCl3(g)→Sb2O3(s)+SbCl3(g). The forth step is the oxidation of Sb2O3 by air, Sb2O3(s)+O2→Sb2O4(s). The activation energy and the order of the thermal decomposition reaction of antimony oxychloride in three steps presented in DTA curves were calculated according to Kinssinger methods from DTA curves. The values of activation energy and the order are respectively 91.97kJ/mol, 0.73 in the first step, 131.14kJ/mol, 0.63 in the second step and 146.94kJ/mol, 1.58 in the third step.

  20. Moisture distribution in sludges based on different testing methods

    Institute of Scientific and Technical Information of China (English)

    Wenyi Deng; Xiaodong Li; Jianhua Yan; Fei Wang; Yong Chi; Kefa Cen

    2011-01-01

    Moisture distributions in municipal sewage sludge, printing and dyeing sludge and paper mill sludge were experimentally studied based on four different methods, i.e., drying test, thermogravimetric-differential thermal analysis (TG-DTA) test, thermogravimetricdifferential scanning calorimetry (TG-DSC) test and water activity test. The results indicated that the moistures in the mechanically dewatered sludges were interstitial water, surface water and bound water. The interstitial water accounted for more than 50% wet basis (wb) of the total moisture content. The bond strength of sludge moisture increased with decreasing moisture content, especially when the moisture content was lower than 50% wb. Furthermore, the comparison among the four different testing methods was presented.The drying test was advantaged by its ability to quantify free water, interstitial water, surface water and bound water; while TG-DSC test, TG-DTA test and water activity test were capable of determining the bond strength of moisture in sludge. It was found that the results from TG-DSC and TG-DTA test are more persuasive than water activity test.

  1. Rumination but not distraction increases eating-related symptoms in anorexia and bulimia nervosa.

    Science.gov (United States)

    Naumann, Eva; Tuschen-Caffier, Brunna; Voderholzer, Ulrich; Caffier, Detlef; Svaldi, Jennifer

    2015-05-01

    Recent models of eating disorders emphasize the importance of ruminative thinking in the occurrence of unhealthy eating behavior. Hence, the aim of the current study was to examine the influence of induced rumination and distraction on the desire to engage in eating-related symptoms in anorexia (AN) and bulimia nervosa (BN). After a sadness induction, either a ruminative or distractive emotion regulation style was encouraged in women with AN (n = 38), BN (n = 37), and non-eating disordered controls (CG; n = 36). At baseline and after the emotion regulation induction feelings of sadness, desire to abstain from eating (DTA) and desire to binge (DTB) were assessed. Main results reveal that rumination led to a significant increase of DTA in the AN group and of DTB in patients with BN. In the CG, DTA significantly decreased after distraction. Although there were significant increases in subjective sadness in the rumination condition, no changes were found in the distraction condition. The results suggest that rumination in response to sadness has a detrimental effect on eating-related symptoms in eating disorders. (c) 2015 APA, all rights reserved).

  2. Hydrogenation of heteroaromatics by high pressure DTA techniques. 3; Koatsu DTA ho ni yoru hokozoku kagobutsu no suisoka (rutenium tanji shokubai ni yoru kakusuisoka datsu hetero hanno)

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, M.; Yoshida, T. [Hokkaido National Industrial Research Institute, Sapporo (Japan); Kotanigawa, T. [Japan International Cooperation Agency, Tokyo (Japan)

    1996-10-28

    Ring-opening of heteroaromatics and heteroatom-removal reaction were studied experimentally using the acidic catalyst containing phosphoric acid for improvement of an upgrading method of coal derived oils. In experiment, some Ru-carrying metal oxide catalysts such as RMZ, RML and RMN catalyst, and MNP catalyst containing phosphoric acid were used as specimens. Nuclear hydrogenation reaction and hydro-denitrogenation reaction of dibenzothiophene and carbazole were compared with each other. The experimental results are as follows. Both RMN and RMNP catalysts offer a superior selectivity in nuclear hydrogenation reaction and hydro-denitrogenation reaction of carbazole. Although both catalysts offer an extremely high nuclear hydrogenation activity at 360{degree}C, these offer the high selectivity of denitrogenation products at 430{degree}C. In comparison of the activities of MN and MNP catalysts with the same Mn2O3:NiO ratio, MNP catalyst offers the higher denitrogenation activity than MN catalyst at 430{degree}C. 1 ref., 3 tabs.

  3. Effect of ghrelin on the motor deficit caused by the ablation of nigrostriatal dopaminergic cells or the inhibition of striatal dopamine receptors.

    Science.gov (United States)

    Suda, Yukari; Kuzumaki, Naoko; Narita, Michiko; Hamada, Yusuke; Shibasaki, Masahiro; Tanaka, Kenichi; Tamura, Hideki; Kawamura, Takashi; Kondo, Takashige; Yamanaka, Akihiro; Narita, Minoru

    2018-02-19

    Ghrelin plays roles in a wide range of central functions by activating the growth hormone secretagogue receptor (GHSR). This receptor has recently been found in the substantia nigra (SN) to control dopamine (DA)-related physiological functions. The dysregulation of DA neurons in the SN pars compacta (SNc) and the consequent depletion of striatal DA are known to underlie the motor deficits observed in Parkinson's disease (PD). In the present study, we further investigated the role of the SN-ghrelin system in motor function under the stereotaxic injection of AAV-CMV-FLEX-diphtheria toxin A (DTA) into the SN of dopamine transporter (DAT)-Cre (DAT SN ::DTA) mice to expunge DA neurons of the SNc. First, we confirmed the dominant expression of GHSR1a, which is a functional GHSR, in tyrosine hydroxylase (TH)-positive DA neurons in the SNc of control mice. In DAT SN ::DTA mice, we clearly observed motor dysfunction using several behavioral tests. An immunohistochemical study revealed a dramatic loss of TH-positive DA neurons in the SNc and DAT-labeled axon terminals in the striatum, and an absence of mRNAs for TH and DAT in the SN of DAT SN ::DTA mice. The mRNA level of GHSR1a was drastically decreased in the SN of these mice. In normal mice, we also found the mRNA expression of GHSR1a within GABAergic neurons in the SN pars reticulata (SNr). Under these conditions, a single injection of ghrelin into the SN failed to improve the motor deficits caused by ablation of the nigrostriatal DA network using DAT SN ::DTA mice, whereas intra-SN injection of ghrelin suppressed the motor dysfunction caused by the administration of haloperidol, which is associated with the transient inhibition of DA transmission. These findings suggest that phasic activation of the SNc-ghrelin system could improve the dysregulation of nigrostriatal DA transmission related to the initial stage of PD, but not the motor deficits under the depletion of nigrostriatal DA. Although GHSRs are found in non

  4. Adaptação e aplicabilidade de um algoritmo de diurético para pacientes com insuficiência cardíaca

    Directory of Open Access Journals (Sweden)

    Maria Karolina Echer Ferreira Feijó

    2013-06-01

    Full Text Available FUNDAMENTO: Estados congestivos podem ser identificados e manejados através de algoritmos como o Diuretic Treatment Algorithm (DTA para ajuste de diurético por telefone, com enfoque na avaliação clínica. Porém, o DTA está disponível somente em língua inglesa. OBJETIVO: Adaptar o DTA e testar sua aplicabilidade para uso no Brasil em pacientes ambulatoriais com IC. MÉTODOS: Seguiram-se as etapas de tradução, síntese, retrotradução, avaliação por comitê de especialistas e pré-teste (aplicabilidade clínica por meio de ensaio clínico randomizado. O DTA foi denominado, na versão para o Brasil, algoritmo de ajuste de diurético (AAD. Os pacientes foram randomizados para grupo intervenção (GI - ajuste de diurético conforme o AAD - ou grupo controle (GC - ajuste convencional. Foi avaliado o escore clínico de congestão (ECC e o peso para ambos os grupos. RESULTADOS: Foram realizadas 12 modificações no DTA. Incluíram-se 34 pacientes. Para aqueles congestos, o aumento de diurético guiado pelo AAD resultou em maior resolução da congestão, com redução de dois pontos no ECC para 50% da amostra -2 (-3,5; -1,0, enquanto a mediana para o GC foi 0 (-1,25; -1,0, (p < 0,001. A mediana de variação de peso foi maior no GI -1,4 (-1,7; -0,5 quando comparado ao GC 0,1 (1,2; -0,6, p = 0,001. CONCLUSÕES: O ADD mostrou-se aplicável na prática clínica após adaptação e parece resultar em melhor controle da congestão em pacientes com IC. A efetividade clínica da ferramenta merece ser testada em amostra maior de pacientes visando sua validação para uso no Brasil (Universal Trial Number: U1111-1130-5749 (Arq Bras Cardiol. 2013; [online]. ahead print, PP.0-0.

  5. SU-F-T-271: Comparing IMRT QA Pass Rates Before and After MLC Calibration

    Energy Technology Data Exchange (ETDEWEB)

    Mazza, A; Perrin, D; Fontenot, J [Mary Bird Perkins Cancer Center, Baton Rouge, LA (United States)

    2016-06-15

    Purpose: To compare IMRT QA pass rates before and after an in-house MLC leaf calibration procedure. Methods: The MLC leaves and backup jaws on four Elekta linear accelerators with MLCi2 heads were calibrated using the EPID-based RIT Hancock Test as the means for evaluation. The MLCs were considered to be successfully calibrated when they could pass the Hancock Test with criteria of 1 mm jaw position tolerance, and 1 mm leaf position tolerance. IMRT QA results were collected pre- and postcalibration and analyzed using gamma analysis with 3%/3mm DTA criteria. AAPM TG-119 test plans were also compared pre- and post-calibration, at both 2%/2mm DTA and 3%/3mm DTA. Results: A weighted average was performed on the results for all four linear accelerators. The pre-calibration IMRT QA pass rate was 98.3 ± 0.1%, compared with the post-calibration pass rate of 98.5 ± 0.1%. The TG-119 test plan results showed more of an improvement, particularly at the 2%/2mm criteria. The averaged results were 89.1% pre and 96.1% post for the C-shape plan, 94.8% pre and 97.1% post for the multi-target plan, 98.6% pre and 99.7% post for the prostate plan, 94.7% pre and 94.8% post for the head/neck plan. Conclusion: The patient QA results did not show statistically significant improvement at the 3%/3mm DTA criteria after the MLC calibration procedure. However, the TG-119 test cases did show significant improvement at the 2%/2mm level.

  6. Preparation, characterization, and kinetics of thermolysis of nickel and copper nitrate complexes with 2,2 Prime -bipyridine ligand

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Dinesh; Kapoor, I.P.S. [Department of Chemistry, DDU Gorakhpur University, Gorakhpur 273 009 (India); Singh, Gurdip, E-mail: gsingh4us@yahoo.com [Department of Chemistry, DDU Gorakhpur University, Gorakhpur 273 009 (India); Froehlich, Roland [Institut fuer Organische Chemie, Universitaet Muenster, D-48149 Muenster (Germany)

    2012-10-10

    Graphical abstract: Nickel and copper nitrate complexes with 2,2 Prime -bipyridine, nitrate and water ligands have been prepared and characterized by single crystal X-ray diffraction, FT-IR and CHN analyses. Thermolysis was performed by using TG, DTA and ignition delay measurements. The kinetics of thermolysis were also evaluated. Highlights: Black-Right-Pointing-Pointer Preparation and characterization of Ni and Cu nitrate complexes have been reported. Black-Right-Pointing-Pointer Thermolysis has been carried out using TG-DTA and ignition delay measurements. Black-Right-Pointing-Pointer Their thermal decomposition pathways have been proposed. Black-Right-Pointing-Pointer Oxides residues as end product of thermolysis were revealed by XRD patterns. Black-Right-Pointing-Pointer Kinetics of their isothermal decomposition was evaluated. - Abstract: Nickel and copper nitrate complexes with 2,2 Prime -bipyridine (bipy) as a N donor and nitrate and water as oxygen donor ligands of the general formula [M(NO{sub 3})(C{sub 10}H{sub 8}N{sub 2})(H{sub 2}O){sub 3}](NO{sub 3}), where M = Ni and Cu, have been obtained from the corresponding metal nitrate salts. These complexes were characterized by X-ray crystallography, FT-IR, and CHN analysis. Both the complexes have been found to be six coordinated. Their thermal decomposition behaviour was investigated by TG, DTA, and ignition delay measurements. TG-DTA examinations of these complexes revealed multistep thermal decomposition. The corresponding metal oxide residues obtained after thermolysis were identified from their X-ray diffraction patterns (XRD). Kinetics of isothermal decomposition of the complexes was established from both the model-fitting as well as isoconversional methods.

  7. Optical properties and crystallization kinetics of (TeO{sub 2})(ZnO)(TiO{sub 2}) glasses

    Energy Technology Data Exchange (ETDEWEB)

    Kabalci, Idris [Department of Physics Education, Education Faculty, Harran University, Sanliurfa (Turkey); Koerpe, Nese Oeztuerk [Department of Materials Science, Eskisehir, Osmangazi University, Eskisehir (Turkey); Duran, Tugba; Oezdemir, Mustafa [Department of Physics, Science and Arts Faculty, Marmara University, Istanbul (Turkey)

    2011-09-15

    Ternary tellurite based glasses in the (TeO{sub 2})(ZnO)(TiO{sub 2}) system were prepared and its optical properties and crystallization kinetics investigated by using UV-VIS spectrophotometer and differential thermal analyzer (DTA). All the glasses were transparent from visible to near infrared region for different ZnO glass compositions (x=0.05, 0.10, 0.20, and 0.30 mol). In the experiment, optical band gap and Urbach energies were estimated from the optical absorption spectra between 400 and 800 nm wavelength region. The observed results confirm that the addition of ZnO glass composition from 0.05 to 0.30 mol increases the optical band gap energy from 2.94 to 3.0 eV. In addition, glass transition (T{sub g}), crystallization (T{sub p}) and melting temperature (T{sub m}) were determined by using the DTA plots. Finally, DTA results obtained with a heating rate of 20 C/min show that the peak crystallization temperature increases from 463 to 533 C as the ZnO content increases from 0.05 to 0.30 mol (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Study of the aluminothermic reduction of niobium pentoxide through thermal analysis experiments and high energy milling processing

    Directory of Open Access Journals (Sweden)

    Claudio Parra De Lazzari

    2007-06-01

    Full Text Available Aluminothermic reduction of niobium pentoxide was studied through thermal analysis techniques such as differential thermal analysis (DTA and thermogravimetry (TG as well as through high energy milling processing. Reactants mixtures were composed by powders of Nb2O5 and Al. In the case of DTA-TG experiments, different molar ratios Nb2O5:Al were heated in a dynamic atmosphere of synthetic air under controlled conditions. The high energy milling runs were carried out via SPEX vibratory mill under argon atmosphere and with milling power equal to 7:1 (ratio of mass of balls to mass of mixture with 10 pct excess of Al over the stoichiometric mass of aluminum necessary. In both kinds of experiments, X ray diffraction was used in order to identify the products of reaction. From DTA-TG experiments, it was possible to determine the experimental value of the enthalpy change (-595.9 kJ.mol-1, which is near to the theoretical one. From the milling experiments, it was possible to verify the possibility of the occurance of aluminothermic reducion of niobium pentoxide via this kind of processing.

  9. Oral Polio Vaccination and Hospital Admissions With Non-Polio Infections in Denmark

    DEFF Research Database (Denmark)

    Sørup, Signe; Stensballe, Lone G; Krause, Tyra Grove

    2016-01-01

    Background.  Live vaccines may have nonspecific beneficial effects on morbidity and mortality. This study examines whether children who had the live-attenuated oral polio vaccine (OPV) as the most recent vaccine had a different rate of admissions for infectious diseases than children with inactiv......Background.  Live vaccines may have nonspecific beneficial effects on morbidity and mortality. This study examines whether children who had the live-attenuated oral polio vaccine (OPV) as the most recent vaccine had a different rate of admissions for infectious diseases than children...... with inactivated diphtheria-tetanus-pertussis-polio-Haemophilus influenzae type b vaccine (DTaP-IPV-Hib) or live measles-mumps-rubella vaccine (MMR) as their most recent vaccine. Methods.  A nationwide, register-based, retrospective cohort study of 137 403 Danish children born 1997-1999, who had received 3 doses...... of DTaP-IPV-Hib, were observed from 24 months (first OPV dose) to 36 months of age. Results.  Oral polio vaccine was associated with a lower rate of admissions with any type of non-polio infection compared with DTaP-IPV-Hib as most recent vaccine (adjusted incidence rate ratio [IRR], 0.85; 95% confidence...

  10. Thermal activation and characterization of chocolate clay for using as adsorbent in nickel removal; Ativacao termica e caracterizacao da argila chocolate visando sua aplicacao como adsorvente na remocao de niquel

    Energy Technology Data Exchange (ETDEWEB)

    Villar, W.C.T.; Brito, A.L.F.; Laborde, H.M.; Rodrigues, M.G.F., E-mail: meiry@deq.ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia Quimica; Ferreira, H.S. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Ciencias e Engenharia de Materiais

    2009-07-01

    Clays present interesting properties as adsorbing material for the removal of heavy metals from effluents. This property is clearly modified by thermal activation. In this work, the characterization of chocolate clay before and after thermal activation (from 300 to 500 deg C) is realized by X-ray diffraction (XRD), differential thermal analysis and thermogravimetric analysis (DTA/TG), infrared spectroscopy (IR), scanning electron microscopy (SEM) and cation exchange capacity (CEC). The main differences between the activated and natural clays are structural modifications of the clay, as shown by XRD and DTA/TG, but also a modification of its cation exchange capacity as shown by the methylene blue method. (author)

  11. Fitness-for-service and defect tolerance assessment - solutions for cracked components to remain in service

    International Nuclear Information System (INIS)

    Nguyen, Ninh; De Beer, Eric

    2013-01-01

    This paper describes the application of the FFS/DTA methodology to assist plant asset managers in dealing with cracks that have been detected in in-service components, particularly those in the power, petrochemical, mining and transport industries. Several state-of-the-art structural integrity assessment proce-dures such as AS/NZS 3788, BS7910, R5-R6 and API-579-1/ ASME FFS-1 are described and discussed; and their application to practical situations using the principles of FFS/DTA is illustrated through a series of selected case studies. The usefulness, effectiveness and versatility of this fracture-mechanics based methodology for examination of in-service cracked components is amply demonstrated.

  12. Thermal activation and characterization of chocolate clay for using as adsorbent in nickel removal

    International Nuclear Information System (INIS)

    Villar, W.C.T.; Brito, A.L.F.; Laborde, H.M.; Rodrigues, M.G.F.; Ferreira, H.S.

    2009-01-01

    Clays present interesting properties as adsorbing material for the removal of heavy metals from effluents. This property is clearly modified by thermal activation. In this work, the characterization of chocolate clay before and after thermal activation (from 300 to 500 deg C) is realized by X-ray diffraction (XRD), differential thermal analysis and thermogravimetric analysis (DTA/TG), infrared spectroscopy (IR), scanning electron microscopy (SEM) and cation exchange capacity (CEC). The main differences between the activated and natural clays are structural modifications of the clay, as shown by XRD and DTA/TG, but also a modification of its cation exchange capacity as shown by the methylene blue method. (author)

  13. Construction of a differential thermal analysis installation; Realisation d'une installation d'analyse thermique differentielle

    Energy Technology Data Exchange (ETDEWEB)

    Branche, G; Chantret, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The authors are indicating the characteristics of a D.T.A. installation they built. Experimental rooms, ovens, thermal regulation, recording methods are thoroughly described, with outlining of the requirements to obtain a high sensitivity. Numerous D.T.A. curves relating to argillaceous substances, bituminous shales, and uraniferous compounds are given. (author) [French] Les auteurs donnent les caracteristiques de l'installation d'Analyse Thermique Differentielle qu'ils ont construits. Ils decrivent en detail les chambres d'experiences, les fours, la regulation thermique, l'enregistrement, en insistant sur les conditions necessaires pour obtenir une sensibilite elevee. Ils donnent de nombreuses courbes differentielles relatives des produits argileux, des schistes bitumineux et des composes uraniferes. (auteur)

  14. Thermal analysis experiment for elucidating sodium-water chemical reaction mechanism in steam generator of sodium-cooled fast reactor

    International Nuclear Information System (INIS)

    Kikuchi, Shin; Kurihara, Akikazu; Ohshima, Hiroyuki

    2012-01-01

    For the purpose of elucidating the mechanism of the sodium-water surface reaction in a steam generator of sodium-cooled fast reactors, kinetic study of the sodium (Na)-sodium hydroxide (NaOH) reaction has been carried out by using Differential Thermal Analysis (DTA) technique. The parameters, including melting points of Na and NaOH, phase transition temperature of NaOH, Na-NaOH reaction temperature, and decomposition temperature of sodium hydride (NaH) have been identified from DTA curves. Based on the measured reaction temperature, rate constant of sodium monoxide (Na 2 O) generation was obtained. Thermal analysis results indicated that Na 2 O generation at the secondary overall reaction should be considered during the sodium-water reaction. (author)

  15. Using the direct method in organophilization of clay chocolate 'A' with organic surfactant; Utilizacao do metodo direto na organofilizacao da argila chocolate 'A' com surfactante organico

    Energy Technology Data Exchange (ETDEWEB)

    Patricio, A.C.L.; Sousa, A.B.; Silva, M.M. da; Rodrigues, M.G.F.; Laborde, H.M., E-mail: cadigena@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Centro de Ciencias e Tecnologia. Unidade Academica de Engenharia Quimica

    2012-07-01

    During the development of this work, we studied the preparation of organoclays through direct method, starting from the natural clay Chocolate 'A' using the quaternary ammonium salt, chloride, alkyl dimethyl benzyl ammonium (Dodigen). The samples were characterized by X-Ray Diffraction (XRD), Infrared Spectroscopy in the Region (IV), Gravimetric and Differential Thermal Analysis (DTA / TGA) and swelling of Foster using solvents, gasoline, kerosene and diesel. Was observed by the results XRD, IR and DTA / TG effective intercalation of quaternary ammonium salts of the inter lamellar spaces of the clay, and by Foster swelling test samples treated with the quaternary ammonium salt Dodigen showed affinity for all the solvents tested. (author)

  16. Thermal and X-ray diffraction analysis studies during the decomposition of ammonium uranyl nitrate

    OpenAIRE

    Kim, B. H.; Lee, Y. B.; Prelas, M. A.; Ghosh, T. K.

    2012-01-01

    Two types of ammonium uranyl nitrate (NH4)2UO2(NO3)4?2H2O and NH4UO2(NO3)3, were thermally decomposed and reduced in a TG-DTA unit in nitrogen, air, and hydrogen atmospheres. Various intermediate phases produced by the thermal decomposition and reduction process were investigated by an X-ray diffraction analysis and a TG/DTA analysis. Both (NH4)2UO2(NO3)4?2H2O and NH4UO2(NO3)3 decomposed to amorphous UO3 regardless of the atmosphere used. The amorphous UO3 from (NH4)2UO2(NO3)4?2H2O was crysta...

  17. Synthesis and characterization of nanostructured titanium carbide for fuel cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Paviter; Singh, Harwinder; Singh, Bikramjeet; Kaur, Manpreet; Kaur, Gurpreet; Kumar, Akshay, E-mail: akshaykumar.tiet@gmail.com [Advanced Functional Material Laboratory, Department of Nanotechnology,, Sri Guru Granth Sahib World University, Fatehgarh Sahib-140 406 Punjab (India); Kumar, Manjeet [Department of Materials Engineering, Defense Institute of Advanced Technology (DU), Pune-411 025 (India); Bala, Rajni [Department of Mathematics Punjabi University Patiala-147 002 Punjab (India)

    2016-04-13

    Titanium carbide (TiC) nanoparticles have been successfully synthesized by carbo-thermic reaction of titanium and acetone at 800 °C. This method is relatively low temperature synthesis route. It can be used for large scale production of TiC. The synthesized nanoparticles have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential thermal analyzer (DTA) techniques. XRD analysis confirmed the formation of single phase TiC. XRD analysis confirmed that the particles are spherical in shape with an average particle size of 13 nm. DTA analysis shows that the phase is stable upto 900 °C and the material can be used for high temperature applications.

  18. Using the direct method in organophilization of clay chocolate 'A' with organic surfactant

    International Nuclear Information System (INIS)

    Patricio, A.C.L.; Sousa, A.B.; Silva, M.M. da; Rodrigues, M.G.F.; Laborde, H.M.

    2012-01-01

    During the development of this work, we studied the preparation of organoclays through direct method, starting from the natural clay Chocolate 'A' using the quaternary ammonium salt, chloride, alkyl dimethyl benzyl ammonium (Dodigen). The samples were characterized by X-Ray Diffraction (XRD), Infrared Spectroscopy in the Region (IV), Gravimetric and Differential Thermal Analysis (DTA / TGA) and swelling of Foster using solvents, gasoline, kerosene and diesel. Was observed by the results XRD, IR and DTA / TG effective intercalation of quaternary ammonium salts of the inter lamellar spaces of the clay, and by Foster swelling test samples treated with the quaternary ammonium salt Dodigen showed affinity for all the solvents tested. (author)

  19. Characterization of nanosized Al2(WO4)3

    International Nuclear Information System (INIS)

    Nihtianova, D.; Velichkova, N.; Nikolova, R.; Koseva, I.; Yordanova, A.; Nikolov, V.

    2011-01-01

    Graphical abstract: TEM method allows to detect small quantities of impurities not detectable by other methods. In our case impurities of W 5 O 14 are detected in Al 2 (WO 4 ) 3 nanopowder. Highlights: → Nanosized Al 2 (WO 4 ) 3 by simple co-precipitation method. → Spherical particles with mean size of 22 nm distributed between 10 and 40 nm at 630 o C. → XRD, DTA and TEM confirm well defined products with perfect structure. → TEM locality allows detection of impurities not detectable by XRD and DTA. -- Abstract: Nanosized aluminum tungstate Al 2 (WO 4 ) 3 was prepared by co-precipitation reaction between Na 2 WO 4 and Al(NO 3 ) 3 aqueous solutions. The powder size and shape, as well as size distribution are estimated after different conditions of powder preparation. The purity of the final product was investigated by XRD and DTA analyses, using the single crystal powder as reference. Between the specimen and the reference no difference was detected. The crystal structure of Al 2 (WO 4 ) 3 nanosized powder was confirmed by TEM (SAED, HRTEM). In additional, TEM locality allows to detect some W 5 O 14 impurities, which are not visible by conventional X-ray powder diffraction and thermal analyses.

  20. Thermal analysis and prediction of phase equilibria in the TiO2-Bi2O3 system

    International Nuclear Information System (INIS)

    Lopez-Martinez, Jaqueline; Romero-Serrano, Antonio; Hernandez-Ramirez, Aurelio; Zeifert, Beatriz; Gomez-Yanez, Carlos; Martinez-Sanchez, Roberto

    2011-01-01

    A thermodynamic study on the TiO 2 -Bi 2 O 3 system was carried out using differential thermal analysis (DTA) and X-Ray diffraction (XRD) techniques covering the composition range from 65 to 90 mol% Bi 2 O 3 . From the XRD results the only two intermediate compounds in the Bi 2 O 3 rich region were Bi 4 Ti 3 O 12 and Bi 12 TiO 20 . The Bi 4 Ti 3 O 12 phase presents the well known plate-like morphology. The experimentally determined phase transition temperatures with DTA technique were compared with thermodynamic calculated results and good agreement was obtained. The DTA results also showed that the limit of the peritectic reaction between liquid and Bi 4 Ti 3 O 12 occurs approximately at 90 mol% Bi 2 O 3 . The phase diagram of the TiO 2 -Bi 2 O 3 system was calculated using a quasichemical model for the liquid phase. The thermodynamic properties of the intermediate compounds were estimated from the data of TiO 2 and Bi 2 O 3 pure solids. In this manner, data for this binary system have been analysed and represented with a small adjustable parameter for the liquid phase.

  1. Effect of amaranth on dielectric, thermal and optical properties of KDP single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Chandran, Senthilkumar; Paulraj, Rajesh, E-mail: rajeshp@ssn.edu.in; Ramasamy, P.

    2017-01-15

    Bulk single crystals of pure and amaranth doped KDP were grown using point seed technique. Effect of amaranth doping on KDP crystals was analyzed using powder XRD, thermal analysis (TG/DTA), dielectric, photoconductivity and etching studies. The phase purity and crystallinity of pure and dye doped crystals were confirmed by powder X-ray diffraction analysis. It is observed from TG-DTA analysis that the decomposition point decreased while doping with amaranth. Dielectric constant and loss increases with increasing temperatures. The photoconductivity decreases with the increase of amaranth concentration. - Highlights: • Pure and amaranth doped KDP crystals grown from point seed technique. • The addition of amaranth changes the decomposition points of dye doped KDP crystals. • Dielectric constant is increased. • It shows positive photoconductivity.

  2. Synthesis of CNTs/CuO and its catalytic performance on the thermal decomposition of ammonium perchlorate

    Directory of Open Access Journals (Sweden)

    Ping Cui

    2016-05-01

    Full Text Available Copper oxide (CuO nanoparticles were successfully deposited on carbon nanotubes’ (CNTs surface via complex-precipitation method, the nanocomposite was characterized by transmission electron microscopy (TEM, scanning electron microscopy (SEM, X-ray photoelectron spectroscopy (XPS, X-ray powder diffraction (XRD, Raman spectroscopy, Fourier transform infrared (FT-IR and Brunauer–Emmett–Teller (BET. The catalytic performance of CNTs/CuO on ammonium perchlorate (AP decomposition was analyzed by differential thermal analyzer (DTA, the DTA results showed its excellent catalytic effect on AP decomposition, as 8 wt.% CNTs/CuO was added in AP, the second exothermic peak temperature decreased by 158 °C. Such composite may be a promising candidate for catalyzing the AP thermal decomposition.

  3. Lattice parameters values and phase diagram for the Cu2Zn1-zFezGeSe4 alloy system

    International Nuclear Information System (INIS)

    Caldera, D.; Quintero, M.; Morocoima, M.; Quintero, E.; Grima, P.; Marchan, N.; Moreno, E.; Bocaranda, P.; Delgado, G.E.; Mora, A.E.; Briceno, J.M.; Fernandez, J.L.

    2008-01-01

    X-ray powder diffraction and differential thermal analysis (DTA) measurements were made on polycrystalline samples of the Cu 2 Zn 1-z Fe z GeSe 4 alloy system. The diffraction patterns were used to show the equilibrium conditions and to estimate crystalline parameter values. It was found that, at room temperature, a single phase solid solution with the tetragonal stannite α structure (I4-bar2m) occurs across the whole composition range. The DTA thermograms were used to construct the phase diagram of the Cu 2 Zn 1-z Fe z GeSe 4 alloy system. It was confirmed that the Cu 2 ZnGeSe 4 compound melts incongruently. It was observed that undercooling effects occur for samples with z > 0.9

  4. Thermal and structural characterization of the vitreous samples in the SiO2 - PbO - Na2O system

    Directory of Open Access Journals (Sweden)

    Mocioiu Catalina Oana

    2006-01-01

    Full Text Available Lead-containing glasses have been used from the ancient time. Recently, due to the possible application in optics, electronics, nuclear techniques, wastes inactivation. the interest in these types of glasses has been renewed. For lead waste inactivation, glasses with high amount of PbO in the composition are required, those exhibiting at the same time a high chemical and thermal stability. Thermal behavior of lead-silicate glasses was examined by differential thermal analysis (DTA. Infrared spectroscopy was used to investigate the structure of the glasses. The spectra were interpreted in terms of the structures of silicate group by comparison with the spectra of other silicate crystals. The DTA and infrared data were correlated with the chemical stability tests.

  5. Synthesis and characterization of La(III), Pr(III), Nd(III), Sm(III), Eu(III), Gd(III), Tb(III) and Dy(III) complexes of 2-acetylfuran-2-thenoylhydrazone

    International Nuclear Information System (INIS)

    Singh, B.; Singh, Praveen K.

    1998-01-01

    The reaction of 2-acetylfuran-2-thenoylhydrazone(afth) with Ln(III) trichlorides yields complexes of the type [Ln(afth)Cl 2 (H 2 O)(EtOH)]Cl, [Ln(III) = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy]. The complexes have been characterized by molar conductance, magnetic susceptibility and TGA and DTA measurements, magnetic susceptibility and TGA and DTA measurements, FAB mass, infrared, proton NMR, electronic absorption and emission spectra. The terbium complex is found to be monomer from the FAB mass spectrum. The IR and NMR spectra suggest neutral tridentate behaviour of the Schiff base. A coordination number seven is proposed around the metal ions. Emission spectra suggest C 3v , symmetry around the metal ion with capped octahedron geometry for the europium complex. (author)

  6. Reentrant behaviour in polyvinyl alcohol-borax hydrogels

    Science.gov (United States)

    Lawrence, Mathias B.; Desa, J. A. E.; Aswal, V. K.

    2018-01-01

    Polyvinyl alcohol (PVA) hydrogels, cross-linked with varying concentrations of borax, were studied with small angle neutron scattering (SANS), x-ray diffraction (XRD) and differential thermal analysis (DTA). The SANS data satisfy the Ornstein-Zernike approximation. The hydrogels are modelled as PVA chains bound by borate cross-links. Water occupies the spaces within the three-dimensional hydrogel network. The mesh size ξ indicates reentrant behaviour i.e. at first, ξ increases and later decreases as a function of borax concentration. The behaviour is explained on the basis of the balance between the charged di-diol cross-links and the shielding by free ions in the solvent. XRD and DTA show the molecular size of water in the solvent and the glass transition temperature commensurate with reentrant behaviour.

  7. Your child's first vaccines

    Science.gov (United States)

    ... term seizures, coma, lowered consciousness, and permanent brain damage have been reported following DTaP vaccination. These reports are extremely rare. Pneumococcal Vaccine Mild Problems: drowsiness or temporary loss of appetite ( ...

  8. Your Baby's First Vaccines

    Science.gov (United States)

    ... term seizures, coma, lowered consciousness, and permanent brain damage have been reported following DTaP vaccination. These reports are extremely rare. Pneumococcal Vaccine Mild Problems: Drowsiness or temporary loss of appetite ( ...

  9. Gene Delivery for Metastatic Prostate Cancer Cells

    National Research Council Canada - National Science Library

    Pang, Shen

    2001-01-01

    .... Enhanced by the bystander effect, the specific expression of the DTA gene causes significant cell death in prostate cancer cell cultures, with very low background cell eradication in control cell lines...

  10. Your Baby's First Vaccines: What You Need to Know

    Science.gov (United States)

    ... term seizures, coma, lowered consciousness, and permanent brain damage have been reported following DTaP vaccination. These reports are extremely rare. Pneumococcal Vaccine • Mild Problems: Drowsiness or temporary loss of appetite ( ...

  11. Fulltext PDF

    Indian Academy of Sciences (India)

    differential thermal analysis (TG–DTA). ... −2 was observed. Keywords. Ceramics; fuel cells; solid state reactions; electromotive force; ionic conduction. 1. ... thermal analysing balance based on the thermogravimetric/ differential thermal analysis ...

  12. Análise térmica de esparfloxacino

    Directory of Open Access Journals (Sweden)

    E. E.S. Schapoval

    2009-01-01

    Full Text Available

    Foi realizada a análise térmica de esparfloxacino, fluorquinolona de terceira geração que possui potente atividade contra bactérias Gram-positivas, como Streptococcus pneumoniae e Staphylococcus aureus inclusive cepas meticilina resistentes (MRSA, bactérias Gram-negativas, anaeróbios, Legionella spp., Mycoplasma spp., Chlamydia spp. e Mycobacterium spp. Nas curvas DTA observa-se pico endotérmico de fusão na temperatura de 276,5 oC. A curva DTA, em ar sintético, apresenta dois picos exotérmicos (341,6 e 579,2 oC, atribuídos à decomposição do composto. A curva TG permite observar a perda de massa total em duas etapas, entre as temperaturas 285,5 e 645,3 oC. A curva DTA, em atmosfera de nitrogênio, apresenta pico exotérmico de decomposição na temperatura de 340,0 oC e na curva TG, a perda de massa inicia-se na temperatura de 254,4 oC. Palavras-chave: Análise térmica, antibacteriano, esparfloxacino, fluorquinolona, quinolona.

  13. Thermal behaviour of nicotinic acid, sodium nicotinate and its compounds with some bivalent transition metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, A.L.C.S. do; Caires, F.J., E-mail: caires.flavio@yahoo.com.br; Gomes, D.J.C.; Gigante, A.C.; Ionashiro, M.

    2014-01-10

    Graphical abstract: - Highlights: • The transition metal ion nicotinates were synthesized. • The TG–DTA curves provided previously unreported information about thermal behaviour. • The gaseous products released were detected by TG–DSC coupled to FTIR. - Abstract: Solid-state M(L){sub 2}·nH{sub 2}O compounds, where M stands for bivalent transition metals (Mn, Fe, Co, Ni, Cu and Zn), L is nicotinate and n = 0–4.5, have been synthesized. Characterization and thermal behaviour of these compounds were investigated employing elemental analysis based on the mass losses observed in the TG–DTA curves, complexometry, X-ray diffractometry, infrared spectroscopy (FTIR), simultaneous thermogravimetric and differential thermal analysis (TG–DTA) and TG–DSC coupled to FTIR. The thermal behaviour of nicotinic acid and its sodium salt was also investigated. For the hydrated transition metal compounds, the dehydration and thermal decomposition of the anhydrous compounds occur in a single step. For the sodium nicotinate, the final residue up to 765 °C is sodium carbonate and for the transition metal nicotinates, the final residues are Mn{sub 3}O{sub 4}, Fe{sub 2}O{sub 3}, Co{sub 3}O{sub 4}, NiO, CuO and ZnO. The results also provided information concerning the thermal stability, thermal decomposition and identification of the gaseous products evolved during the thermal decomposition of the compounds.

  14. Thermal analysis and prediction of phase equilibria in the TiO{sub 2}-Bi{sub 2}O{sub 3} system

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Martinez, Jaqueline, E-mail: jacky-411@hotmail.com [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F (Mexico); Romero-Serrano, Antonio, E-mail: romeroipn@hotmail.com [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F (Mexico); Hernandez-Ramirez, Aurelio, E-mail: aurelioh@hotmail.com [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F (Mexico); Zeifert, Beatriz, E-mail: bzeifert@yahoo.com [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F (Mexico); Gomez-Yanez, Carlos, E-mail: cgomezy@ipn.mx [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F (Mexico); Martinez-Sanchez, Roberto, E-mail: roberto.martinez@cimav.edu.mx [CIMAV, Av. Miguel de Cervantes 120, Chihuahua C.P.31109 (Mexico)

    2011-03-20

    A thermodynamic study on the TiO{sub 2}-Bi{sub 2}O{sub 3} system was carried out using differential thermal analysis (DTA) and X-Ray diffraction (XRD) techniques covering the composition range from 65 to 90 mol% Bi{sub 2}O{sub 3}. From the XRD results the only two intermediate compounds in the Bi{sub 2}O{sub 3} rich region were Bi{sub 4}Ti{sub 3}O{sub 12} and Bi{sub 12}TiO{sub 20}. The Bi{sub 4}Ti{sub 3}O{sub 12} phase presents the well known plate-like morphology. The experimentally determined phase transition temperatures with DTA technique were compared with thermodynamic calculated results and good agreement was obtained. The DTA results also showed that the limit of the peritectic reaction between liquid and Bi{sub 4}Ti{sub 3}O{sub 12} occurs approximately at 90 mol% Bi{sub 2}O{sub 3}. The phase diagram of the TiO{sub 2}-Bi{sub 2}O{sub 3} system was calculated using a quasichemical model for the liquid phase. The thermodynamic properties of the intermediate compounds were estimated from the data of TiO{sub 2} and Bi{sub 2}O{sub 3} pure solids. In this manner, data for this binary system have been analysed and represented with a small adjustable parameter for the liquid phase.

  15. Effects of a Diphtheria-Tetanus-Acellular Pertussis Vaccine on Immune Responses in Murine Local Lymph Node and Lung Allergy Models▿

    Science.gov (United States)

    Vandebriel, Rob J.; Gremmer, Eric R.; van Hartskamp, Michiel; Dormans, Jan A. M. A.; Mooi, Frits R.

    2007-01-01

    We have previously shown that in mice, diphtheria-tetanus-acellular pertussis (DTaP) vaccination before Bordetella pertussis infection resulted in, besides effective clearance, immediate hypersensitivity (lung eosinophilia, increased total serum immunoglobulin E [IgE], and increased ex vivo Th2 cytokine production by cells from the bronchial lymph nodes). To better appreciate the extent of these findings, we measured DTaP vaccination effects in the local lymph node assay (LLNA) and an ovalbumin (OVA) lung allergy model. In the LLNA, mice were vaccinated or adjuvant treated before being sensitized with trimellitic anhydride (TMA; inducing a Th2-directed response) and dinitrochlorobenzene (DNCB; inducing a Th1-directed response). Compared to the adjuvant-treated controls, the vaccinated mice showed a decreased response to TMA and (to a much lesser extent) an increased response to DNCB. The decreased response to TMA coincided with increased transforming growth factor β levels. With the exception of filamentous hemagglutinin, all vaccine constituents contributed to the decreased response to TMA. In the lung allergy model, sensitization induced OVA-specific IgE, lung pathology (peribronchiolitis, perivasculitis, and hypertrophy of the bronchiolar mucus cells) and increased the number of eosinophils, lymphocytes, and neutrophils in the bronchoalveolar lavage fluid. Vaccination failed to modulate these parameters. In conclusion, although DTaP vaccination may affect the LLNA response, we found no evidence of an effect on lung allergy. PMID:17202304

  16. Thermal behaviour of nicotinic acid, sodium nicotinate and its compounds with some bivalent transition metal ions

    International Nuclear Information System (INIS)

    Nascimento, A.L.C.S. do; Caires, F.J.; Gomes, D.J.C.; Gigante, A.C.; Ionashiro, M.

    2014-01-01

    Graphical abstract: - Highlights: • The transition metal ion nicotinates were synthesized. • The TG–DTA curves provided previously unreported information about thermal behaviour. • The gaseous products released were detected by TG–DSC coupled to FTIR. - Abstract: Solid-state M(L) 2 ·nH 2 O compounds, where M stands for bivalent transition metals (Mn, Fe, Co, Ni, Cu and Zn), L is nicotinate and n = 0–4.5, have been synthesized. Characterization and thermal behaviour of these compounds were investigated employing elemental analysis based on the mass losses observed in the TG–DTA curves, complexometry, X-ray diffractometry, infrared spectroscopy (FTIR), simultaneous thermogravimetric and differential thermal analysis (TG–DTA) and TG–DSC coupled to FTIR. The thermal behaviour of nicotinic acid and its sodium salt was also investigated. For the hydrated transition metal compounds, the dehydration and thermal decomposition of the anhydrous compounds occur in a single step. For the sodium nicotinate, the final residue up to 765 °C is sodium carbonate and for the transition metal nicotinates, the final residues are Mn 3 O 4 , Fe 2 O 3 , Co 3 O 4 , NiO, CuO and ZnO. The results also provided information concerning the thermal stability, thermal decomposition and identification of the gaseous products evolved during the thermal decomposition of the compounds

  17. Experimental investigation and thermodynamic calculations of the Bi–In–Ni phase diagram

    International Nuclear Information System (INIS)

    Premović, Milena; Minić, Duško; Manasijević, Dragan; Ćosović, Vladan; Živković, Dragana; Dervišević, Irma

    2015-01-01

    Highlights: • Calculated constitutive binary system based on literature data. • Experimentally determined (DTA) temperatures of phase transformations compared with analytical calculation. • Definition of several vertical sections. • Calculated horizontal section, confirmed by experimental SEM–EDS and XRD method. • Calculated liquidus surface projection and determined invariant reaction occurred in ternary Bi–In–Ni system. - Abstract: Phase diagram of the Bi–In–Ni ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) analysis. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections In–Bi 0.8 Ni 0.2 , x(Bi) = 0.6 and Bi–In 0.5 Ni 0.5 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 100 °C, 300 °C and 350 °C was carried out using SEM–EDS and XRD methods. The obtained results were compared with the calculated isothermal sections of the Bi–In–Ni ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Bi–In–Ni ternary system were presented

  18. A study of phase transformations in complex matallic alloys Al73Mn23Pd4 and Al73Mn21Pd6

    Czech Academy of Sciences Publication Activity Database

    Priputen, P.; Černičková, I.; Kusý, M.; Illeková, E.; Švec, P.; Buršík, Jiří; Svoboda, Milan; Dolinšek, J.; Janovec, J.

    2011-01-01

    Roč. 465, - (2011), s. 302-305 ISSN 1013-9826 Institutional research plan: CEZ:AV0Z20410507 Keywords : ternary alloy system * phase transformation * DTA/SEM Subject RIV: BM - Solid Matter Physics ; Magnetism

  19. SU-E-T-183: Clinical Quality Assurance Workflow for Dynamic Tumor Tracking Radiation Dose Delivery

    International Nuclear Information System (INIS)

    Mamalui-Hunter, M; Su, Z; Li, Z

    2015-01-01

    Purpose: One of the most important aspects of implementation of new treatment modalities is an ‘end-to-end’ verification of the treatment process. Radiation treatment based on dynamic tracking of a tumor is highly patient-specific, therefore, special attention should be paid to quality assurance of the treatment delivery. Our goal was to design the clinical workflow that ensures accurate delivery of the planned dose using the Dynamic Target Tracking option of VeroTM (BrainLab,MHI) linac. Methods: A patient simulation is designed to include a pre-treatment session to verify whether the system can reliably track the motion of the implanted marker and build the 4D model of the target motion. The external surrogate and target motion patterns are recorded in the ExactracTM log files. In this work, a spectrum of custom marker and external surrogate motion trajectories closely resembling the patient specific motion patterns was used. 1mm thick/11mm long VisicoilTM marker was placed 15 and 20mm from the center of the spherical tissue equivalent target (centroid to centroid distance) in the 4D motion phantom (CIRSTM). 3D conformal (3 mm block margin) SBRT plans were delivered to 2 moving targets in the phantom: 1) 20mm diameter target that allows ion chamber dose measurement and 2) 25mm target that allows using film to measure CAX dose (GafchromicTM EBT3 used). The measured dose was compared to the iPlanTM TPS results using MonteCarlo algorithm (1% variance, Dose-to-water). Results: On average, film shows 98.9% pass using gamma criterion for 2% and 2mm DTA, 94.3% match for 2% and 1 mm DTA, 98% pass for 1% and 2 mm DTA however only 88% points passing for 1% and 1 mm DTA. Ion chamber measurements agreed with the calculation within 1.5%. Conclusion: The clinical QA workflow was designed for SBRT delivery using real-time tumor tracking on VeroTM linac

  20. Amine-functionalized magnetic nanoparticles as robust support for ...

    Indian Academy of Sciences (India)

    their surface properties via introduction of functional groups holds great prospect in the field of ... Biomaterials; enzyme activity; enzyme biocatalysis; nanoparticles; surface properties. 1. .... lyzer (Pyris Diamond TG-DTA) with a heating rate. 8.

  1. Whooping Cough Vaccine Recommendation for Babies and Young Children

    Centers for Disease Control (CDC) Podcasts

    This podcast provides information about whooping cough and the recommendation that all children receive the DTaP vaccine, according to CDC’s recommended schedule, to help protect them from this serious disease.

  2. Lattice parameters values and phase diagram for the Cu{sub 2}Zn{sub 1-z}Fe{sub z}GeSe{sub 4} alloy system

    Energy Technology Data Exchange (ETDEWEB)

    Caldera, D. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Quintero, M. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela)], E-mail: mquinter@ula.ve; Morocoima, M.; Quintero, E.; Grima, P.; Marchan, N.; Moreno, E.; Bocaranda, P. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Delgado, G.E. [Laboratorio de Cristalografia, Departamento de Quimica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Mora, A.E.; Briceno, J.M.; Fernandez, J.L. [Laboratorio de Analisis Quimico y Estructura de Materiales, Departamento de Fisica, Universidad de Los Andes, Merida 5101 (Venezuela)

    2008-06-12

    X-ray powder diffraction and differential thermal analysis (DTA) measurements were made on polycrystalline samples of the Cu{sub 2}Zn{sub 1-z}Fe{sub z}GeSe{sub 4} alloy system. The diffraction patterns were used to show the equilibrium conditions and to estimate crystalline parameter values. It was found that, at room temperature, a single phase solid solution with the tetragonal stannite {alpha} structure (I4-bar2m) occurs across the whole composition range. The DTA thermograms were used to construct the phase diagram of the Cu{sub 2}Zn{sub 1-z}Fe{sub z}GeSe{sub 4} alloy system. It was confirmed that the Cu{sub 2}ZnGeSe{sub 4} compound melts incongruently. It was observed that undercooling effects occur for samples with z > 0.9.

  3. Deformation potentials for band-to-band tunneling in silicon and germanium from first principles

    Science.gov (United States)

    Vandenberghe, William G.; Fischetti, Massimo V.

    2015-01-01

    The deformation potentials for phonon-assisted band-to-band tunneling (BTBT) in silicon and germanium are calculated using a plane-wave density functional theory code. Using hybrid functionals, we obtain: DTA = 4.1 × 108 eV/cm, DTO = 1.2 × 109 eV/cm, and DLO = 2.2 × 109 eV/cm for BTBT in silicon and DTA = 7.8 × 108 eV/cm and DLO = 1.3 × 109 eV/cm for BTBT in germanium. These values agree with experimentally measured values and we explain why in diodes, the TA/TO phonon-assisted BTBT dominates over LO phonon-assisted BTBT despite the larger deformation potential for the latter. We also explain why LO phonon-assisted BTBT can nevertheless dominate in many practical applications.

  4. Preparation of thermally stable nanocrystalline hydroxyapatite by hydrothermal method.

    Science.gov (United States)

    Prakash Parthiban, S; Elayaraja, K; Girija, E K; Yokogawa, Y; Kesavamoorthy, R; Palanichamy, M; Asokan, K; Narayana Kalkura, S

    2009-12-01

    Thermally stable hydroxyapatite (HAp) was synthesized by hydrothermal method in the presence of malic acid. X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), differential thermal analysis (DTA), thermogravimetric analysis (TGA) was done on the synthesized powders. These analyses confirmed the sample to be free from impurities and other phases of calcium phosphates, and were of rhombus morphology along with nanosized particles. IR and Raman analyses indicated the adsorption of malic acid on HAp. Thermal stability of the synthesized HAp was confirmed by DTA and TGA. The synthesized powders were thermally stable upto 1,400 degrees C and showed no phase change. The proposed method might be useful for producing thermally stable HAp which is a necessity for high temperature coating applications.

  5. Synthesis, characterization and oxide ionic conductivity of β-type ...

    Indian Academy of Sciences (India)

    examined to detect whether there was a change in the mass of the powder sample ... model diffractometer (Bragg-Brentano geometry, graphite monochromator with ... simultaneous DTA/TG system (Perkin Elmer Diamond type). The samples of ...

  6. Proposal for a Coordinated Research Project: Prediction of Axial and Radial Creep in Pressure Tubes

    International Nuclear Information System (INIS)

    Bozzano, Patricia B.

    2013-01-01

    Participation of Argentina: • hydrogen charge of 90 samples for hydrogen determination: IGF, HVEMS, DSC, Resistivity, DTA; • 17 samples for non destructive techniques; • 6 blisters in CANDU pressure tube sections for NDT evaluation

  7. Heat treatment of concrete and its influence on the mechanical properties

    Directory of Open Access Journals (Sweden)

    Elkacemi Sana

    2014-04-01

    The objective of our work is to study by thermogravimetric and differential thermal analysis (TGA / DTA and the heated unheated concrete to follow the evolution of solid phases present in the latter when exposed to high temperatures.

  8. FastStats: Whooping Cough or Pertussis

    Science.gov (United States)

    ... Women’s Health State and Territorial Data Reproductive Health Contraceptive Use Infertility Reproductive Health Notice Regarding FastStats Mobile ... DT/DTaP vaccination: 84.6% (2015) Percent of adolescents aged 13-17 years with 1 dose or ...

  9. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min Sik; Jun, Yubin; Lee, Changha, E-mail: clee@unist.ac.kr; Oh, Jae Eun, E-mail: ohjaeeun@unist.ac.kr

    2013-12-15

    The use of calcium oxide (CaO) demonstrates a superior potential for the activation of ground granulated blast furnace slag (GGBFS), and it produces a higher mechanical strength than calcium hydroxide [Ca(OH){sub 2}]. The mechanical strength differences between CaO- and Ca(OH){sub 2}-activated GGBFS binders are explored using isothermal calorimetry, powder X-ray diffraction, thermogravimetric and differential thermal analysis (TGA and DTA) as well as compressive strength testing. Calcium silicate hydrate (C–S–H), Ca(OH){sub 2} and a hydrotalcite-like phase are found as reaction products in all samples. The TGA and DTA results indicate that the use of CaO produces more C–S–H, although this is not likely to be the primary cause of higher strength development in the CaO-activated GGBFS. Rather, other factors such as porosity may govern the strength at a higher order of magnitude. Significant reduction of Ca(OH){sub 2} occurs only with the use of Ca(OH){sub 2}, followed by the formation of carbonate (CaCO{sub 3}), indicating carbonation. -- Highlights: •CaO showed a better potential for the activation of GGBFS than Ca(OH){sub 2}. •Strength test, XRD, TGA/DTA and isothermal calorimetry are used. •C-S-H, Ca(OH){sub 2}, and a hydrotalcite-like phase are found in all samples. •The use of Ca(OH){sub 2} causes some degree of carbonation.

  10. Qualidade física e sensorial de biscoitos doces com fécula de mandioca Physical and sensorial quality of sweet cookies with cassava starch

    Directory of Open Access Journals (Sweden)

    Jucyanne Carvalho Vieira

    2010-12-01

    Full Text Available Neste trabalho, foi avaliada a substituição de 5, 10 e 15% de farinha de trigo por fécula de mandioca na elaboração de biscoito doce. Ambas, farinha e fécula, foram submetidas à caracterização físico-química, reológica e análise térmica diferencial (DTA. Os biscoitos produzidos foram comparados por meio de análises sensoriais e microbiológicas. O resultado da análise térmica diferencial não mostrou qualquer alteração no comportamento de gelatinização do amido. O teste de aceitação sensorial mostrou que a crocância foi o único atributo que apresentou diferença significativa, indicando a viabilidade técnica de substituição da farinha de trigo por 15% de fécula de mandioca.This research evaluated the substitution of 5, 10 and 15% of wheat flour for cassava starch in sweet cookies production. Both, flour and starch were submitted to the physicochemical, rheological and differential thermal analysis (DTA. The produced cookies were compared through sensory and microbiological analyses. The DTA result didn´t show any alteration in the starch gelatinization behavior. The result of the sensory acceptance analysis showed that crispness is the unique attribute that presented significant difference, indicating the technical viability of wheat flour substitution for 15% of cassava starch.

  11. Measurement of the aortic diameter in the asymptomatic Korean population: Assessment with multidetector CT

    International Nuclear Information System (INIS)

    Lee, Sang Hwan; Lee, Whal; Choi, Hyuck Jae; Kim, Dae Jin; Park, Eun Ah; Chung, Jin Wook; Park, Jae Hyung

    2013-01-01

    To determine normal reference values for aortic diameters in asymptomatic Korean adults. Three hundred adults without signs or symptoms of cardiovascular diseases were enrolled in this study. Aortic diameters were measured at nine predetermined levels on CT images. Aortic diameter measurements were adjusted for body surface area. Analysis of data was performed with regard to age, sex, weight, height and hypertension. Aortic diameters were 2.99 ± 0.57 cm at the ascending aorta, 2.54 ± 0.35 cm at the transverse aortic arch, 2.36 ± 0.35 cm at the proximal descending thoracic aorta (DTA), 2.23 ± 0.37 cm at the mid DTA, 2.17 ± 0.38 cm at the distal DTA, 2.16 ± 0.37 cm at the thoracoabdominal junction, 2.10, 00B1, 0.35 cm at the level of the celiac axis, 1.94, 00B1, 0.36 cm at the suprarenal aorta, 1.58 ± 0.24 cm at the aortic bifurcation. Men had slightly larger diameters than women (p < 0.05). All diameters increased with age and hypertension, with statistical significance (p < 0.01). And all aortic diameters increased with height (p < 0.05) except at the level of the aortic arch (p = 0.056), and increased with weight (p < 0.05) except at the level of the suprarenal aorta (p = 0.067). Male sex, higher weight and height, age and hypertension are associated with larger aortic diameters in asymptomatic Korean adults.

  12. Experimental investigation and thermodynamic calculations of the Ag–Bi–Ga phase diagram

    International Nuclear Information System (INIS)

    Minić, Duško; Premović, Milena; Manasijević, Dragan; Ćosović, Vladan; Živković, Dragana; Marković, Aleksandar

    2015-01-01

    Phase diagram of the Ag–Bi–Ga ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and x-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic prediction of phase equilibria based on calculation of phase diagram (CALPHAD) method. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag–Bi 50 Ga 50 , Bi–Ag 50 Ga 50 and Ga–Ag 50 Bi 50 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 200 °C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal section of the Ag–Bi–Ga ternary system at corresponding temperature. Calculated liquidus projection and invariant equilibria of the Ag–Bi–Ga ternary system were presented. The obtained values were found to be in a close agreement. - Highlights: • Calculated constitutive binary system based on literature data. • Experimentally determined (DTA) temperatures of phase transformations compared with analytical calculation. • Definition of three vertical sections Ag–Bi 50 Ga 50 , Bi–Ag 50 Ga 50 and Ga–Ag 50 Bi 50 . • Calculated horizontal section at 200 °C, confirmed by experimental SEM-EDS and XRD method. • Calculated liquidus surface projection and determined invariant reaction occurred in ternary Ag–Bi–Ga system

  13. Research Article Special Issue

    African Journals Online (AJOL)

    2018-02-01

    Feb 1, 2018 ... determined to be PW/ PEG400 = 1/3, 5% (w/w) acid loading and .... Thermal gravimetric analysis (TGA) and differential thermal analysis (DTA) measurement ... tape and sputter-coated with gold to impart electrical conductivity ...

  14. Use of sugar-cane bagasse ash to produce glass-ceramic material in the system Ca O-SiO2-Na2O

    International Nuclear Information System (INIS)

    Teixeira, S.R.; Santos, G.T.A.; Magalhaes, R.S.; Rincon, J.Ma.; Romero, M.; Carvalho, C.L.

    2009-01-01

    A bottom ash was used as raw material to obtain glass which was crystallized to form glass-ceramic material. The characterization of the ash shows that it consists mainly of crystalline materials, predominantly quartz, with oxides of iron, potassium and aluminum as minor elements. The glass was obtained from the mixing of ash with calcium and sodium carbonates. The glass and the glass-ceramic were examined using differential thermal analysis (DTA), X-ray fluorescence (XRF), X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD and DTA data show that Wollastonita is the only crystalline phase present in the material crystallized at 1050 deg C. Part of the glass was synthesized at this temperature for one hour, resulting in a green/brown hard material glass-ceramic. The images of SEM show morphology of spherilithic growth indicating volumetric crystallization mechanism. (author)

  15. Kinetics and Mechanism of Oxidation of Triethylene Glycol and Tetraethylene Glycol by Ditelluratoargentate (III in Alkaline Medium

    Directory of Open Access Journals (Sweden)

    Jinhuan Shan

    2013-01-01

    Full Text Available The kinetics of oxidation of triethylene glycol and tetraethylene glycol by ditelluratoargentate (III (DTA in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2 K–313.2 K. The reaction rate showed first-order dependence in DTA and fractional order with respect to triethylene glycol or tetraethylene glycol. It was found that the pseudo-first-order rate constant (kobs increased with an increase in concentration of OH− and a decrease in concentration of H4TeO6 2−. There was a negative salt effect and no free radicals were detected. A plausible mechanism involving a two-electron transfer was proposed, and the rate equations derived from the mechanism explained all the experimental results and observations. The activation parameters along with the rate constants of the rate-determining step were calculated.

  16. Mechanical and thermal properties of physically-blended-plastic films

    International Nuclear Information System (INIS)

    Abu Issa, M. S.

    1983-10-01

    Low density polyethylene (LDPE) and isotactic polypropylene (PP) blend were produced in film form and were characterized by a number of techniques such as wide-angle x-ray diffraction (WAXD), differential thermal analysis (DTA), scanning electron microscopy (SEM), and instron tensile testing. Results of WAXD and DTA showed conclusively that the two components in the blend are incompatible. SEM micrographs indicated that the 60/40 and 40/60 PP/PE blends show approximately fine homogeneous dispersion of the minor component into the matrix of the major component. The mechanical properties of the blend films improved with respect to the PE homo polymer. The improvement was more remarkable with the increase of the PP component in the blend. Results obtained in this work were explained in terms of crystallinity and the crystallite orientation. 28 refs., 29 figs., 5 tabs. (A.M.H.)

  17. Neutron diffraction and thermal studies of amorphous CS2 realised by low-temperature vapour deposition

    International Nuclear Information System (INIS)

    Yamamuro, O.; Matsuo, T.; Onoda-Yamamuro, N.; Takeda, K.; Munemura, H.; Tanaka, S.; Misawa, M.

    2003-01-01

    We have succeeded in preparing amorphous carbon disulphide (CS 2 ) by depositing its vapour on a cold substrate at 10 K. Complete formation of the amorphous state has been confirmed by neutron diffraction and differential thermal analysis (DTA). The amorphous sample crystallized at ca. 70 K, which is lower than the hypothetical glass transition temperature (92 K) estimated from the DTA data of the (CS 2 ) x (S 2 Cl 2 ) 1-x binary mixture. CS 2 , a symmetric linear tri-atomic molecule, is the simplest of the amorphized molecular substances whose structural and thermal information has been reported so far. Comparison of the static structure factors S(Q) has shown that the orientational correlation of CS 2 molecules may be much stronger in the amorphous state than in the liquid state at higher temperature. (authors)

  18. Use of sugar-cane bagasse ash to produce glass-ceramic material in the system Ca O-SiO{sub 2}-Na{sub 2}O; Utilizacao de cinza de bagaco de cana para produzir material vitro-ceramico do sistema SiO{sub 2}-CaO-Na{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, S.R.; Santos, G.T.A.; Magalhaes, R.S., E-mail: rainho@fct.unesp.b [Universidade Estadual Paulista (DFQB/FCT/UNESP), Presidente Prudente, SP (Brazil). Fac. de Ciencias e Tecnologia. Dept. de Fisica, Quimica e Biologia; Rincon, J.Ma.; Romero, M. [Consejo Superior de Investigaciones Cientificas (IETCC/CSIC), Madri (Spain). Inst. de Ciencias de la Construccion Eduardo Torroja; Carvalho, C.L. [Universidade Estadual Paulista (FEIS/UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia

    2009-07-01

    A bottom ash was used as raw material to obtain glass which was crystallized to form glass-ceramic material. The characterization of the ash shows that it consists mainly of crystalline materials, predominantly quartz, with oxides of iron, potassium and aluminum as minor elements. The glass was obtained from the mixing of ash with calcium and sodium carbonates. The glass and the glass-ceramic were examined using differential thermal analysis (DTA), X-ray fluorescence (XRF), X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD and DTA data show that Wollastonita is the only crystalline phase present in the material crystallized at 1050 deg C. Part of the glass was synthesized at this temperature for one hour, resulting in a green/brown hard material glass-ceramic. The images of SEM show morphology of spherilithic growth indicating volumetric crystallization mechanism. (author)

  19. Functionalization of Chitosan with 3,4,5-Trihydroxy Benzoic Acid Moiety for The Uptake of Chromium Species

    Directory of Open Access Journals (Sweden)

    Akhmad Sabarudin

    2013-03-01

    Full Text Available Chitosan-based chelating resin, the cross-linked chitosan functionalized with 3,4,5-trihydroxy benzoic acid moiety (CCTS-THBA resin, was newly synthesized and its adsorption behavior toward appropriate elements was investigated. At pH 5-9, the CCTS-THBA resin showed quantitative adsorption (87-91% for Cr (VI, while only < 15% for Cr (III. The addition of cyclohexanediamine tetraacetic acid (CyDTA to the samples resulted in a considerably increase of the adsorption of both chromium species. In this condition, Cr (III is chelated with CyDTA to form anionic complexes at pH 3-5, which was then completely adsorbed on the resin by ion exchange mechanism. Similarly, the adsorption of Cr (VI reached almost 100% in pH range of 3-6. The adsorption capacity of CCTS-THBA resin for Cr (VI was 109 mg g-1.

  20. A comparative study between three stability indicating spectrophotometric methods for the determination of diatrizoate sodium in presence of its cytotoxic degradation product based on two-wavelength selection

    Science.gov (United States)

    Riad, Safaa M.; El-Rahman, Mohamed K. Abd; Fawaz, Esraa M.; Shehata, Mostafa A.

    2015-06-01

    Three sensitive, selective, and precise stability indicating spectrophotometric methods for the determination of the X-ray contrast agent, diatrizoate sodium (DTA) in the presence of its acidic degradation product (highly cytotoxic 3,5-diamino metabolite) and in pharmaceutical formulation, were developed and validated. The first method is ratio difference, the second one is the bivariate method, and the third one is the dual wavelength method. The calibration curves for the three proposed methods are linear over a concentration range of 2-24 μg/mL. The selectivity of the proposed methods was tested using laboratory prepared mixtures. The proposed methods have been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives. The results were statistically compared with the official US pharmacopeial method. No significant difference for either accuracy or precision was observed.

  1. Studies on various properties of pure and Li-doped Barium Hydrogen Phosphate (BHP) single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Nallamuthu, D. [Department of Physics, Aditanar College of Arts and Science, Tiruchendur 628216, Tamil Nadu (India); Selvarajan, P., E-mail: pselvarajanphy@yahoo.co.i [Department of Physics, Aditanar College of Arts and Science, Tiruchendur 628216, Tamil Nadu (India); Freeda, T.H. [Physics Research Centre, S.T. Hindu College, Nagercoil 629002 (India)

    2010-12-15

    Single crystals of pure and Li-doped barium hydrogen phosphate (BHP) were grown by solution method with gel technique. Various properties of the harvested crystals were studied by carrying out single crystal and powder XRD, FTIR, TG/DTA, microhardness and dielectric studies. Atomic absorption study was carried out for Li-doped BHP crystal to check the presence of Li dopants. Unit cell dimensions and diffracting planes of the grown crystals have been identified from XRD studies. Functional groups of the title compounds have been identified from FTIR studies. Density of the grown crystals was calculated using the XRD data. Thermal stability of the samples was checked by TG/DTA studies. Mechanical and dielectric characterizations of the harvested pure and Li-doped BHP crystals reveal the mechanical strength and ferroelectric transition. The observed results are reported and discussed.

  2. Growth, spectral, structural and mechanical properties of struvite ...

    Indian Academy of Sciences (India)

    Struvite stones are commonly found in women. It forms in human ... Crystals obtained have been analysed by powder and single crystal XRD, SEM–EDX, FTIR and TG–DTA. The results ... This relative freedom from constriction is believed to ...

  3. Syntheses, structures and properties of two coordination polymers of ...

    Indian Academy of Sciences (India)

    Dipu Sutradhar

    2017-11-10

    Nov 10, 2017 ... with a Perkin-Elmer Diamond TG/DTA analyzer heated from. 30–800 .... diffractometer using graphite monochromated Mo-Kα radi- ation (0.71073 Å). The unit ..... the change in complementary unitsPolyhedron 3948; (b). Roy S ...

  4. Correlation between agronomic and stem borer resistant traits in ...

    African Journals Online (AJOL)

    GY had significant relationship with days to 50% pollen shed, (DTA) (rg = 0.49**), plant height (PH) (rg ... that either days to 50% pollen shed or plant height could be considered in selection for stem borer resistance. ... HOW TO USE AJOL.

  5. About the role of silver in high temperature reactions of Y1 Ba2 Cu3 O7-σ superconductor ceramic

    International Nuclear Information System (INIS)

    Fiscina, J.E.; Esparza, D.A.

    1995-01-01

    Superconducting properties vs. firing protocol was studied in Ag-Y 1 Ba 2 Cu 3 O 7-σ composite. We present, as a part of a more complete study, R vs. T characterization. DTA-TGA measurements and SEM-EDAX analysis

  6. On the growth of calcium tartrate tetrahydrate single crystals

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... The grown crystals were characterized by atomic absorption spectroscopy (AAS), X-ray diffraction analysis (XRD), microhardness measurement, Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and differential thermal analysis (DTA). The results obtained are compared with the ...

  7. Crystal growth and comparison of vibrational and thermal properties ...

    Indian Academy of Sciences (India)

    The TGA–DTA studies showed the thermal properties of the crystals. ... impact on laser technology, optical communication and optical storage technology. [1,2]. .... UTHC and UTHS crystals in the temperature range of 25–1100◦C with a heat-.

  8. Ex situ synthesis of G/ α -Fe 2 O 3 nanocomposite and its catalytic ...

    Indian Academy of Sciences (India)

    Graphene oxide (GO) was synthesized using a modified Hummers method and graphenenanosheets ... The characterization of the as-prepared materialswas performed using X-ray diffraction analyses and ... The results of DTA indicated that the obtained nanomaterials contributein ameliorating the thermal ... Current Issue

  9. Thermochemical behaviour of Ru(II) complex–SiO2 microcomposites

    Indian Academy of Sciences (India)

    WINTEC

    both the gel spectra are to be expected accounting for the complex molar mass of ..... (ii) TEOS + OtEOS-produced gel: No principle diffe- rences in the DTG, DTA ... Acknowledgements. The study was carried out with the financial support from.

  10. The hydrocarbon accumulations mapping in crystalline rocks by mobile geophysical methods

    Science.gov (United States)

    Nesterenko, A.

    2013-05-01

    Sedimentary-migration origin theory of hydrocarbons dominates nowadays. However, a significant amount of hydrocarbon deposits were discovered in the crystalline rocks, which corroborates the theory of non-organic origin of hydrocarbons. During the solving of problems of oil and gas exploration in crystalline rocks and arrays so-called "direct" methods can be used. These methods include geoelectric methods of forming short-pulsed electromagnetic field (FSPEF) and vertical electric-resonance sounding (VERS) (FSPEF-VERS express-technology). Use of remote Earth sounding (RES) methods is also actual. These mobile technologies are extensively used during the exploration of hydrocarbon accumulations in crystalline rocks, including those within the Ukrainian crystalline shield. The results of explorations Four anomalous geoelectric zones of "gas condensate reservoir" type were quickly revealed as a result of reconnaissance prospecting works (Fig. 1). DTA "Obukhovychi". Anomaly was traced over a distance of 4 km. Approximate area is 12.0 km2. DTA"Korolevskaya". Preliminary established size of anomalous zone is 10.0 km2. The anomalous polarized layers of gas and gas-condensate type were determined. DTA "Olizarovskaya". Approximate size of anomaly is about 56.0 km2. This anomaly is the largest and the most intense. DTA "Druzhba". Preliminary estimated size of anomaly is 16.0 km2. Conclusions Long experience of a successful application of non-classical geoelectric methods for the solving of variety of practical tasks allow one to state their contribution to the development of a new paradigm of geophysical researches. Simultaneous usage of the remote sensing data processing and interpretation method and FSPEF and VERS technologies can essentially optimize and speed up geophysical work. References 1. S.P. Levashov. Detection and mapping of anomalies of "hydrocarbon deposit" type in the fault zones of crystalline arrays by geoelectric methods. / S.P. Levashov, N.A. Yakymchuk, I

  11. Diagnostic accuracy research in glaucoma is still incompletely reported: An application of Standards for Reporting of Diagnostic Accuracy Studies (STARD 2015.

    Directory of Open Access Journals (Sweden)

    Manuele Michelessi

    Full Text Available Research has shown a modest adherence of diagnostic test accuracy (DTA studies in glaucoma to the Standards for Reporting of Diagnostic Accuracy Studies (STARD. We have applied the updated 30-item STARD 2015 checklist to a set of studies included in a Cochrane DTA systematic review of imaging tools for diagnosing manifest glaucoma.Three pairs of reviewers, including one senior reviewer who assessed all studies, independently checked the adherence of each study to STARD 2015. Adherence was analyzed on an individual-item basis. Logistic regression was used to evaluate the effect of publication year and impact factor on adherence.We included 106 DTA studies, published between 2003-2014 in journals with a median impact factor of 2.6. Overall adherence was 54.1% for 3,286 individual rating across 31 items, with a mean of 16.8 (SD: 3.1; range 8-23 items per study. Large variability in adherence to reporting standards was detected across individual STARD 2015 items, ranging from 0 to 100%. Nine items (1: identification as diagnostic accuracy study in title/abstract; 6: eligibility criteria; 10: index test (a and reference standard (b definition; 12: cut-off definitions for index test (a and reference standard (b; 14: estimation of diagnostic accuracy measures; 21a: severity spectrum of diseased; 23: cross-tabulation of the index and reference standard results were adequately reported in more than 90% of the studies. Conversely, 10 items (3: scientific and clinical background of the index test; 11: rationale for the reference standard; 13b: blinding of index test results; 17: analyses of variability; 18; sample size calculation; 19: study flow diagram; 20: baseline characteristics of participants; 28: registration number and registry; 29: availability of study protocol; 30: sources of funding were adequately reported in less than 30% of the studies. Only four items showed a statistically significant improvement over time: missing data (16, baseline

  12. One-year post-primary antibody persistence and booster immune ...

    African Journals Online (AJOL)

    One-year post-primary antibody persistence and booster immune response to a DTaP-IPV//PRP~T vaccine (Pentaxim) given at 18 - 19 months of age in South African children primed at 6, 10 and 14 weeks of age with the same vaccine.

  13. EFFECT OF COOLING RATES ON THE MICROSTRUCTURE AND ...

    African Journals Online (AJOL)

    ... eutectic under three cooling conditions were proposed. In the DTA mode (slow cooling), the relationship between the two phases was stable. However as the cooling rates increased ( quenching and meltspun modes), the relationship tended towards metastability. KEY WORDS: alloy, solidification, microstructure, eutectic, ...

  14. Routing strategy including time and carbon dioxide emissions : effects on network performance

    NARCIS (Netherlands)

    Zhang, Fan; Chen, Y.; Goni Ros, B.; GAO, Jian; Knoop, V.L.

    2016-01-01

    Traffic congestion leads to delays and increased carbon dioxide (CO2) emissions. Traffic management measures such as providing information on environmental route costs have been proposed to mitigate congestion. Multi-criteria routing dynamic traffic assignment (MCR-DTA) models are needed to evaluate

  15. A new green approach for the reduction of graphene oxide ...

    Indian Academy of Sciences (India)

    2.2 Preparation of GO. GO was prepared by oxidizing the graphite powder in a mix- ... measured using a Diamond TG/DTA analyzer (Perkin Elmer. Instruments). ... domains during the reduction of GO.23 This change of ID/IG value is in good ...

  16. First Aid: Coughing

    Science.gov (United States)

    ... this topic for: Parents Kids Teens Flu Center Asthma Center Your Child's Immunizations: Diphtheria, Tetanus & Pertussis Vaccine (DTaP) Whooping Cough (Pertussis) Is It a Cold or the Flu? Why Is Hand Washing So ... Asthma Center Flu Center Whooping Cough Your Lungs & Respiratory ...

  17. Alkali and bleach treatment of the extracted cellulose from pineapple ...

    African Journals Online (AJOL)

    (FTIR) spectroscopy, Thermogravimetric analysis (TGA) and Differential thermal analysis (DTA). SEM micrographs revealed that alkali treatment removed the impurities in the pineapple leaf fibers and subsequent bleaching further purify the fibers leaving mostly cellulose only while hemicellulose and lignin are removed as ...

  18. Phase Equilibria in the Bi-In-Sn-Zn System. Thermal Analysis vs. Calculations

    Directory of Open Access Journals (Sweden)

    Dębski A.

    2017-12-01

    Full Text Available With the use of the differential thermal analysis (DTA, studies of the phase transitions were conducted for 90 of alloys from the quaternary Bi-In-Sn-Zn system and for the constant ratio of Bi:In and Bi:Sn. The studies were conducted for the alloys prepared from the purity metals (Bi, In, Sn, Zn = 99.999 mas. % by way of melting in a graphite crucible in a glove-box filled with Ar, in which the impurities level was less than 0.1 ppm. After melting and thorough mixing, the liquid alloys were poured out into a graphite test mold. The phase transition temperature data obtained from the DTA investigations were next confronted with those determined from the calculations based on the binary and ternary optimized thermodynamic parameters available in the literature. It was found that the experimental and the calculated phase transition temperatures were in good agreement.

  19. Neutron diffraction and thermal studies of amorphous CS{sub 2} realised by low-temperature vapour deposition

    Energy Technology Data Exchange (ETDEWEB)

    Yamamuro, O.; Matsuo, T. [Osaka Univ., Dept. of Chemistry, Graduate School of Sciences (Japan); Onoda-Yamamuro, N. [Tokyo Denki Univ., College of Sciences and Technology (Japan); Takeda, K. [Naruto Univ., Dept. of Chemistry, Tokushima (Japan); Munemura, H.; Tanaka, S.; Misawa, M. [Niigata Univ. (Japan). Faculty of Science

    2003-08-01

    We have succeeded in preparing amorphous carbon disulphide (CS{sub 2}) by depositing its vapour on a cold substrate at 10 K. Complete formation of the amorphous state has been confirmed by neutron diffraction and differential thermal analysis (DTA). The amorphous sample crystallized at ca. 70 K, which is lower than the hypothetical glass transition temperature (92 K) estimated from the DTA data of the (CS{sub 2}){sub x}(S{sub 2}Cl{sub 2}){sub 1-x} binary mixture. CS{sub 2}, a symmetric linear tri-atomic molecule, is the simplest of the amorphized molecular substances whose structural and thermal information has been reported so far. Comparison of the static structure factors S(Q) has shown that the orientational correlation of CS{sub 2} molecules may be much stronger in the amorphous state than in the liquid state at higher temperature. (authors)

  20. Formation of condensed phosphates when heating CdO with NH4H2PO4

    International Nuclear Information System (INIS)

    Atstinya, L.Zh.; Dindune, A.P.; Konstant, Z.A.

    1987-01-01

    A study was made on process of CdO thermal condensation with NH 4 H 2 PO 4 depending on the ratio of basic substances and temperature synthesis conditions. It was established that reaction between CdO and NH 4 H 2 PO 4 of pure for analysis grade was initiated when basic mixtures were pounded with a pestle. Heating of cadmium-ammonium triphosphate with products of ammonium dihydrophosphate polycondensation in 330-350 deg C range resulted to CdNH 4 (PO 3 ) 3 formation. Exoeffect on DTA curves corresponded at 540 deg C to formation of α-Cd(PO 3 ) 2 . α-Cd(PO 3 ) 2 → β-Cd(PO 3 ) 2 transition took place at 810 deg C with successive melting of β-Cd(PO 3 ) 2 at 850 deg C, which was supported by the DTA curve and sharp change of the relative electric conductivity

  1. Thermodynamic evaluation of the Cu-Mg-Zr system

    International Nuclear Information System (INIS)

    Haemaelaeinen, M.; Zeng, K.

    1999-01-01

    The thermodynamic evaluation of the Cu-Mg-Zr system is presented in this paper. A literature survey was carried out first based on the most recent literature, which was scanned from the THERMET literature database. The evaluation of the thermodynamic parameters was carried out using Thermo-Calc (version H) software. The evaluation of the Cu-Mg-Zr system was carried out using the most recent experimental data from the literature and a set of DTA measurements. DTA measurements were done using alumina (Al 2 O 3 ) crucibles under helium atmosphere with the niobium (Nb) reference crucible. The evaluated Cu-Mg-Zr phase diagram fitted well with experimental data with the liquidus data in a limited range of composition. There were two miscibility gaps observe in the system. New τ phase was detected using the X-ray and microscopic analysis and the data was used in this evaluation. (orig.)

  2. Self-affirmation attenuates death-thought accessibility after mortality salience, but not among a high post-traumatic stress sample.

    Science.gov (United States)

    Vail, Kenneth E; Morgan, Adrienne; Kahle, Lauren

    2018-01-01

    According to anxiety buffer disruption theory (ABDT), people function effectively in the world, in part, by relying on anxiety-buffer systems to protect against death awareness; however, traumatic experiences can overwhelm and disrupt those anxiety-buffer systems, leaving people unprotected from death awareness and at increased risk for the major symptom clusters of posttraumatic stress disorder (PTSD). Based on that idea, it was hypothesized that (a) when posttraumatic stress symptoms are low, self-affirmation (a known worldview/self-esteem based anxiety-buffer) should prevent mortality reminders from causing increased death-thought accessibility (DTA); but that (b) when posttraumatic stress symptoms are high (indicating anxiety-buffer disruption), self-affirmation should fail to prevent mortality reminders from increasing DTA. To test these hypotheses, participants identified in a general population prescreen assessment as "low posttraumatic-stress symptom" (n = 222) and "high posttraumatic-stress symptom" (n = 210) were reminded of death (vs. control topic), prompted to engage in a self-affirmation (vs. nonself-affirmation) task, and then asked to complete a standard assessment of death-thought accessibility (DTA). The hypotheses were confirmed, revealing that posttraumatic stress symptoms were associated with the ineffectiveness of anxiety-buffer system in protecting against increased death awareness. The present findings support of a foundational concept of ABDT, and point to new insights about the nature of PTSD and its treatment, because failure to manage death awareness is known to cause anxiety and exacerbate anxiety-related disorders (e.g., PTSD). (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  3. Selection and reporting of statistical methods to assess reliability of a diagnostic test: Conformity to recommended methods in a peer-reviewed journal

    International Nuclear Information System (INIS)

    Park, Ji Eun; Sung, Yu Sub; Han, Kyung Hwa

    2017-01-01

    To evaluate the frequency and adequacy of statistical analyses in a general radiology journal when reporting a reliability analysis for a diagnostic test. Sixty-three studies of diagnostic test accuracy (DTA) and 36 studies reporting reliability analyses published in the Korean Journal of Radiology between 2012 and 2016 were analyzed. Studies were judged using the methodological guidelines of the Radiological Society of North America-Quantitative Imaging Biomarkers Alliance (RSNA-QIBA), and COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) initiative. DTA studies were evaluated by nine editorial board members of the journal. Reliability studies were evaluated by study reviewers experienced with reliability analysis. Thirty-one (49.2%) of the 63 DTA studies did not include a reliability analysis when deemed necessary. Among the 36 reliability studies, proper statistical methods were used in all (5/5) studies dealing with dichotomous/nominal data, 46.7% (7/15) of studies dealing with ordinal data, and 95.2% (20/21) of studies dealing with continuous data. Statistical methods were described in sufficient detail regarding weighted kappa in 28.6% (2/7) of studies and regarding the model and assumptions of intraclass correlation coefficient in 35.3% (6/17) and 29.4% (5/17) of studies, respectively. Reliability parameters were used as if they were agreement parameters in 23.1% (3/13) of studies. Reproducibility and repeatability were used incorrectly in 20% (3/15) of studies. Greater attention to the importance of reporting reliability, thorough description of the related statistical methods, efforts not to neglect agreement parameters, and better use of relevant terminology is necessary

  4. Mecanismos cognitivos en la toma de decisiones en situaciones de incertidumbre. Un estudio con pacientes con demencia tipo Alzheimer

    Directory of Open Access Journals (Sweden)

    Aurora Moreno

    2012-08-01

    Full Text Available Los pacientes con demencia tipo Alzheimer (DTA suelen presentar problemas en la toma de decisiones (TD, incluso ya en fase leve. Diversos estudios han analizado el funcionamiento de los mecanismos cognitivos en los procesos de TD, especialmente en situaciones de incertidumbre. Una de estas aproximaciones es la hipótesis del marcador somático a través de la Iowa Gambling Task (IGT y el índice Gambling (IG. Uno de los problemas es la inespecificidad de los indicadores de la IGT, por ello se han propuesto modelos explicativos para solventar estas carencias, como el Prospective Valence Learning (PVL. En este trabajo, aplicamos la IGT a 10 pacientes y 10 controles. Analizamos los parámetros del PVL: aversión a las pérdidas (λ regla de utilidad (α, recencia (A y consistencia (c, y la evolución de la tarea en función de las elecciones ventajosas. Nuestros resultados muestran que el rendimiento de los controles es mejor que el de pacientes DTA, aunque en las fases iniciales no hay diferencias, estas se ciñen a los dos bloques finales. En los parámetros del PVL se obtienen diferencias en α y c y en menor medida en λ. A partir de los parámetros del PVL podemos caracterizar el proceso de toma de decisiones de los pacientes DTA, como sensibles a las pérdidas, más influenciados por las elecciones inmediatas y un nivel de consistencia muy bajo, que indica estrategias de elección aleatoria.

  5. Selection and reporting of statistical methods to assess reliability of a diagnostic test: Conformity to recommended methods in a peer-reviewed journal

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ji Eun; Sung, Yu Sub [Dept. of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Asan Medical Center, Seoul (Korea, Republic of); Han, Kyung Hwa [Dept. of Radiology, Research Institute of Radiological Science, Yonsei University College of Medicine, Seoul (Korea, Republic of); and others

    2017-11-15

    To evaluate the frequency and adequacy of statistical analyses in a general radiology journal when reporting a reliability analysis for a diagnostic test. Sixty-three studies of diagnostic test accuracy (DTA) and 36 studies reporting reliability analyses published in the Korean Journal of Radiology between 2012 and 2016 were analyzed. Studies were judged using the methodological guidelines of the Radiological Society of North America-Quantitative Imaging Biomarkers Alliance (RSNA-QIBA), and COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) initiative. DTA studies were evaluated by nine editorial board members of the journal. Reliability studies were evaluated by study reviewers experienced with reliability analysis. Thirty-one (49.2%) of the 63 DTA studies did not include a reliability analysis when deemed necessary. Among the 36 reliability studies, proper statistical methods were used in all (5/5) studies dealing with dichotomous/nominal data, 46.7% (7/15) of studies dealing with ordinal data, and 95.2% (20/21) of studies dealing with continuous data. Statistical methods were described in sufficient detail regarding weighted kappa in 28.6% (2/7) of studies and regarding the model and assumptions of intraclass correlation coefficient in 35.3% (6/17) and 29.4% (5/17) of studies, respectively. Reliability parameters were used as if they were agreement parameters in 23.1% (3/13) of studies. Reproducibility and repeatability were used incorrectly in 20% (3/15) of studies. Greater attention to the importance of reporting reliability, thorough description of the related statistical methods, efforts not to neglect agreement parameters, and better use of relevant terminology is necessary.

  6. Heterogeneidad clínica de la demencia y severidad de la apraxia en pacientes con demencia tipo Alzheimer

    Directory of Open Access Journals (Sweden)

    Daniel G. Politis

    2013-11-01

    Full Text Available La evolución clínica de la Enfermedad de Alzheimer presenta gran heterogeneidad clínica. Se han descripto diferentes subtipos clínicos, entre ellos Mayeux et al. (1985 reportan la existencia de 4, que presentan diferentes niveles de severidad cognitiva y funcional. La diversidad clínica de estos no ha sido claramente investigada.La evolución clínica de la Enfermedad de Alzheimer presenta gran heterogeneidad clínica. Se han descripto diferentes subtipos clínicos, entre ellos Mayeux et al. (1985 reportan la existencia de 4, que presentan diferentes niveles de severidad cognitiva y funcional. La diversidad clínica de estos no ha sido claramente investigada.Objetivos: estudiar la severidad de demencia, la severidad de la apraxia y el deterioro funcional en relación con los subtipos clínicos de Mayeux en pacientes con Demencia tipo Alzheimer (DTA. Se evaluaron 49 pacientes con diagnóstico de DTA. Se encontraron correlaciones estadísticamente significativas entre la clasificación de Mayeux con la severidad de la demencia, la severidad de la apraxia y el deterioro funcional.La severidad de demencia, de la apraxia y el deterioro funcional parece acompañar los diferentes subtipos clínicos descriptos por Mayeux, por lo cual la evaluación y detección de las mismas podrían contribuir a la clasificación clínica y pronóstico de la DTA.

  7. Experimental investigation and thermodynamic calculations of the Ag–Bi–Ga phase diagram

    Energy Technology Data Exchange (ETDEWEB)

    Minić, Duško, E-mail: dminic65@open.telekom.rs [University in Priština, Faculty of Technical Science, Kos. Mitrovica (Serbia); Premović, Milena [University in Priština, Faculty of Technical Science, Kos. Mitrovica (Serbia); Manasijević, Dragan [University of Belgrade, Technical Faculty, Bor (Serbia); Ćosović, Vladan [University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Belgrade (Serbia); Živković, Dragana [University of Belgrade, Technical Faculty, Bor (Serbia); Marković, Aleksandar [University in Priština, Faculty of Technical Science, Kos. Mitrovica (Serbia)

    2015-10-15

    Phase diagram of the Ag–Bi–Ga ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and x-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic prediction of phase equilibria based on calculation of phase diagram (CALPHAD) method. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag–Bi{sub 50}Ga{sub 50}, Bi–Ag{sub 50}Ga{sub 50} and Ga–Ag{sub 50}Bi{sub 50} were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 200 °C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal section of the Ag–Bi–Ga ternary system at corresponding temperature. Calculated liquidus projection and invariant equilibria of the Ag–Bi–Ga ternary system were presented. The obtained values were found to be in a close agreement. - Highlights: • Calculated constitutive binary system based on literature data. • Experimentally determined (DTA) temperatures of phase transformations compared with analytical calculation. • Definition of three vertical sections Ag–Bi{sub 50}Ga{sub 50}, Bi–Ag{sub 50}Ga{sub 50} and Ga–Ag{sub 50}Bi{sub 50}. • Calculated horizontal section at 200 °C, confirmed by experimental SEM-EDS and XRD method. • Calculated liquidus surface projection and determined invariant reaction occurred in ternary Ag–Bi–Ga system.

  8. Phase transition temperatures of Sn-Zn-Al system and their comparison with calculated phase diagrams

    Czech Academy of Sciences Publication Activity Database

    Smetana, B.; Zlá, S.; Kroupa, Aleš; Žaludová, M.; Drápala, J.; Burkovič, R.; Petlák, D.

    2012-01-01

    Roč. 110, č. 1 (2012), s. 369-378 ISSN 1388-6150 R&D Projects: GA MŠk(CZ) OC08053 Institutional support: RVO:68081723 Keywords : Sn-Zn-Al system * DTA * phase transition temperatures Subject RIV: BJ - Thermodynamics Impact factor: 1.982, year: 2012

  9. Investigations of surface characterization of silicone rubber due to ...

    Indian Academy of Sciences (India)

    Unknown

    †Department of Polymer Technology, Crescent Engineering College, Chennai 600 048, India. Abstract. In the present work, tracking ... Silicone rubber; surface degradation; tracking; WAXD; TG–DTA. 1. Introduction. Power transmission at ... mena in polymer insulators under d.c. voltages. Hence the tracking phenomena ...

  10. Search strategies to identify diagnostic accuracy studies in MEDLINE and EMBASE

    NARCIS (Netherlands)

    Beynon, Rebecca; Leeflang, Mariska M. G.; McDonald, Steve; Eisinga, Anne; Mitchell, Ruth L.; Whiting, Penny; Glanville, Julie M.

    2013-01-01

    A systematic and extensive search for as many eligible studies as possible is essential in any systematic review. When searching for diagnostic test accuracy (DTA) studies in bibliographic databases, it is recommended that terms for disease (target condition) are combined with terms for the

  11. Live vaccine against measles, mumps, and rubella and the risk of hospital admissions for nontargeted infections

    DEFF Research Database (Denmark)

    Sørup, Signe; Benn, Christine Stabell; Poulsen, Anja

    2014-01-01

    ). Nationwide Danish registers provided data on vaccinations and hospital admissions. The recommended vaccination schedule was inactivated vaccine against diphtheria, tetanus, pertussis, polio, and Haemophilus influenzae type b (DTaP-IPV-Hib) administered at ages 3, 5, and 12 months and MMR at age 15 months...

  12. In Vitro Evaluation of Antimicrobial Activity of Crude Extract from ...

    African Journals Online (AJOL)

    Patrick Erah

    antimicrobial herbal formulation with these plants. ACKNOWLEDGEMENTS. The authors are thankful to All India Council for. Technical Education, New Delhi, India for financial assistance. REFERENCES. 1. Weisser R, Asscher AW, Winpenny J. In vitro reversal of antibiotic resistance by DTA. Nature 1966; 219: 1365-1366.

  13. Thermogravimetric investigations of vanadium complexes

    International Nuclear Information System (INIS)

    Bechmann, W.; Uhlemann, E.; Ludwig, W.

    1987-01-01

    Extensive studies on oxovanadium(IV) and (V) complexes with bidentate chelating ligands include thermogravimetric investigations. TG, DTG, and DTA data provide additional facts to redox behaviour and stability of the complexes. These data also allow a critical appreciation of the given melting temperatures. (author)

  14. Synthesis and characterization of thermally stable oligomer-metal ...

    African Journals Online (AJOL)

    The thermal stabilities of the oligomer-metal complexes were compared by thermogravimetric (TG) and differential thermal (DTA) analyses. According to TG, oligomer-metal complexes were stable against to temperature and thermooxidative decomposition. The weight losses of oligomer-metal complexes were found to be 5 ...

  15. Carbon monoxide oxidation using Zn-Cu-Ti hydrotalcite-derived ...

    Indian Academy of Sciences (India)

    Multioxide catalysts of zinc, copper and titanium with different ratios obtained from layered double hydroxide (LDH) precursors were used in the oxidation of carbon monoxide. The catalysts were characterized by energy-dispersive X-ray spectrometry, X-ray diffraction, thermal analyses (TG, DTG and DTA) and scanning ...

  16. Immunogenicity and safety of an acellular pertussis, diphtheria ...

    African Journals Online (AJOL)

    Objective. To assess the immunogenicity and safety data for a pentavalent combination vaccine containing acellular pertussis, inactivated poliovirus, and Haemophilus influenzae (Hib) polysaccharide-conjugate antigens. Methods. A DTaP-IPV//PRP~T vaccine (Pentaxim™) was given at 6, 10 and 14 weeks of age to 212 ...

  17. Crystallization study of amorphous system Fe84-xWxB16 (x = 3;5)

    International Nuclear Information System (INIS)

    Novakova, A.A.; Sidorova, G.V.; Kiseleva, T.Yu.; Szasz, A.

    1992-01-01

    A complex study of the crystallization process of the amorphous system was carried out by Moessbauer spectroscopy, X-ray diffraction and DTA. Alloy samples crystallized at 600deg C contain the following phases: α-Fe, Fe 3 B and solid solution (Fe, W) 3 B. (orig.)

  18. Differential thermal analysis microsystem for explosive detection

    DEFF Research Database (Denmark)

    Olsen, Jesper Kenneth; Greve, Anders; Senesac, L.

    2011-01-01

    as a small silicon nitride membrane incorporating heater elements and a temperature measurement resistor. In this manuscript the DTA system is described and tested by measuring calorimetric response of 3 different kinds of explosives (TNT, RDX and PETN). This project is carried out under the framework...

  19. Recomendación sobre la vacuna contra la tosferina para los bebés y niños pequeños(Whooping Cough Vaccine Recommendation for Babies and Young Children)

    Centers for Disease Control (CDC) Podcasts

    Este podcast proporciona información acerca de la tosferina y la recomendación de que todos los niños reciban la vacuna DTaP según el calendario recomendado por los CDC para ayudar a protegerlos contra esta grave enfermedad.

  20. Thermal studies on the weathering status of Lakhra coal

    International Nuclear Information System (INIS)

    Kumbher, M.; Vasandani, A.G.M.; Shah, S.W.

    2002-01-01

    Thermal studies about the weathering status of Lakhra coal were conducted using thermogravimetric (TG) and differential thermal analysis (DTA) in N/sub 2/ and air atmospheres. These studies were centered on the extent of the release of volatile matters and the determination of calorific values. The decline in these parameters, i.e. volatile matters and calorific values, cause a decline in the caking properties of coal and promote auto-ignition. The TG behavior of weathered samples in N/sub 2/ indicates a clear decline in percent moisture and volatile matters and abrupt burning of the fixed carbon. The TG curves further indicate quick decomposition of samples at various temperatures and auto-ignition with respect to time. The DTA behavior of the weathered samples in air, shows a significant difference in peak configuration, such as suppression of main endothermic peaks and shifting of shoulder peaks towards lower temperature. The N/sub 2/ atmosphere gives illusive and ill-defined events with respect to time. (author)

  1. A study of the crystallization of ZrO

    International Nuclear Information System (INIS)

    Aguilar, D. H.; Torres-Gonzalez, L. C.; Torres-Martinez, L. M.; Lopez, T.; Quintana, P.

    2001-01-01

    ZrO(sub 2)-SiO(sub 2) sol-gel powders were produced using tetraethoxysilane (TEOS) and zirconium propoxide. After gellation, the ZrO(sub 2) crystallization process was investigated using X-ray diffraction (XRD), thermal analysis (DTA/TGA), and scanning electron microscopy (SEM). Fresh gels were amorphous. Thermal treatments were carried out from 100 to 1400 C for a total annealing time of 182 h. Tetragonal zirconia, (Z(t)) was the first phase to crystallize, between 300 and 500 C. Crystallization temperature was lower for zirconia-rich compositions, increasing as silica content was raised. DTA analysis showed that Z(t) crystallization occurred in two stages. Complete tetragonal-monoclinic zirconia transformation occurred near 1000 C, and was clearly observed only in ZrO(sub 2)-rich compositions ( and gt;80%). Silica remains amorphous until 1200 C, when ZrSiO(sub 4) formation took place. A metastable sol-gel phase diagram was proposed to show the crystallization process between 100 and 1400 C

  2. Gamma index evaluation of IMRT technique using gafchromic film EBT3 for homogeneous and inhomogeneous material

    Science.gov (United States)

    Nisauf, T. A.; Wibowo, W. E.; Pawiro, S. A.

    2017-07-01

    This study was done to evaluate the gamma index for registering between the planar of dose planning and the measurement of EBT film. The treatment plan was simulated for 5 patients using Fan Beam Computerized Tomography (FBCT) modality, Philips Pinnacle planning system, 6 MV photon energy, 50 segments IMRT technique, and calculation grid resolution (CGR) of 0.2 cm. Gamma Index (GI) evaluation was done with criteria of dose difference (DD) of 2 %, dose to agreement (DTA) of 2 mm and dose difference (DD) of 5 % DTA of 3 mm, SAD 100 cm, depth of 5 cm and 10 cm of the phantom. The result shows that GI for homogeneous material is greater than for inhomogeneous material with discrepancy to previous work is about 1.98 % for homogeneous material (depth 5 cm) and 2.05 % (depth 10 cm) while it was found of 2.98 % for inhomogeneous material (equivalent depth 5 cm) and 4.59 % (equivalent depth 10 cm).

  3. Computer-aided control of high-quality cast iron

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2008-04-01

    Full Text Available The study discusses the possibility of control of the high-quality grey cast iron and ductile iron using the author’s genuine computer programs. The programs have been developed with the help of algorithms based on statistical relationships that are said to exist between the characteristic parameters of DTA curves and properties, like Rp0,2, Rm, A5 and HB. It has been proved that the spheroidisation and inoculation treatment of cast iron changes in an important way the characteristic parameters of DTA curves, thus enabling a control of these operations as regards their correctness and effectiveness, along with the related changes in microstructure and mechanical properties of cast iron. Moreover, some examples of statistical relationships existing between the typical properties of ductile iron and its control process were given for cases of the melts consistent and inconsistent with the adopted technology.A test stand for control of the high-quality cast iron and respective melts has been schematically depicted.

  4. Delineation of phase fields at the Te-rich end of the Ru Te binary system

    Science.gov (United States)

    Ali (Basu), M.; Bharadwaj, S. R.; Das, D.

    2005-04-01

    The tellurium rich side of the ruthenium-tellurium binary system was studied by differential thermal analysis. To avoid reported problems of Te loss by evaporation and reactive interference of Te to the thermocouples of the thermal analyzer, the present study made use of specially designed sealed quartz capsules as DTA containers. The thermal analyses were carried out over the compositional range of 0.66 ⩽ xTe ⩽ 1.00 with the help of SETARAM TG/DTA and other indigenously built thermal analyzers available in this laboratory. The thermal data generated for fifteen different compositions were interpreted for the nature of phase transitions occurring at their characteristic temperatures. The Ru-Te binary system was found to have a eutectic transformation at 444 °C at a composition of xTe = 0.918 and a monotectic transformation at 447 °C at a composition of xTe = 0.700. Up to 6 at.% Ru is soluble in Te at about 440 °C.

  5. Delineation of phase fields at the Te-rich end of the Ru-Te binary system

    International Nuclear Information System (INIS)

    Ali, M.; Bharadwaj, S.R.; Das, D.

    2005-01-01

    The tellurium rich side of the ruthenium-tellurium binary system was studied by differential thermal analysis. To avoid reported problems of Te loss by evaporation and reactive interference of Te to the thermocouples of the thermal analyzer, the present study made use of specially designed sealed quartz capsules as DTA containers. The thermal analyses were carried out over the compositional range of 0.66 x Te 1.00 with the help of SETARAM TG/DTA and other indigenously built thermal analyzers available in this laboratory. The thermal data generated for fifteen different compositions were interpreted for the nature of phase transitions occurring at their characteristic temperatures. The Ru-Te binary system was found to have a eutectic transformation at 444 deg. C at a composition of x Te = 0.918 and a monotectic transformation at 447 deg. C at a composition of x Te = 0.700. Up to 6 at.% Ru is soluble in Te at about 440 deg. C

  6. Synthesis, characterization, crystal structure, and thermal analysis of 2-chloro-N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl) acetamide

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, R. [University of Jammu, X-ray Crystallography Laboratory, Post-Graduate Department of Physics & Electronics (India); Nayak, P. S.; Narayana, B. [Mangalore University, Mangalagangotri, Department of Studies in Chemistry (India); Kant, R., E-mail: rkvk.paper11@gmail.com [University of Jammu, X-ray Crystallography Laboratory, Post-Graduate Department of Physics & Electronics (India)

    2015-12-15

    The title compound, C{sub 13}H{sub 14}O{sub 2}N{sub 3}Cl, has been synthesized by the reaction of chloroacetyl chloride with 4-aminoantipyrine in basic media and characterized by FT-IR, CHN elemental analysis, UV-Vis, TGA, DTA, DSC and single crystal X-ray diffraction. crystals are monoclinic, sp. gr. P2{sub 1}/c, a = 6.9994(6), b = 12.4035(13), c = 15.836(2) Å, β = 100.367(9)°, Z = 4. The crystal structure is stabilized by N–H···O and C–H···O interactions, the former interactions result in the formation of dimers corresponding to R{sub 2}{sup 2} (10) graphset motif and the dimers are further connected by C–H···O hydrogen bonding forming chains. In addition, the thermal stability of the compound was determined by TGA, DTA, DSC analysis, and absorption at λ{sub max} = 298 nm was determined by UV-Vis spectrophotometer.

  7. Lattice parameter values and phase transitions for the Cu2Cd1-zMn zGeSe4 and Cu2Cd1-zFe zGeSe4 alloys

    International Nuclear Information System (INIS)

    Quintero, E.; Tovar, R.; Quintero, M.; Delgado, G.E.; Morocoima, M.; Caldera, D.; Ruiz, J.; Mora, A.E.; Briceno, M.; Fernandez, J.L.

    2007-01-01

    X-ray powder diffraction measurements and differential thermal analysis (DTA) were made on polycrystalline samples of the Cu 2 Cd 1-z Mn z GeSe 4 and Cu 2 Cd 1-z Fe z GeSe 4 alloy systems. The diffraction patterns were used to show the equilibrium conditions and to derive lattice parameter values. The effect of the annealing temperature and cooling rate to room temperature are discussed. For the Cu 2 Cd 1-z Fe z GeSe 4 system, only two single solid phase fields, the tetragonal stannite α and the wurtz-stannite δ structures were found to occur in the diagram. For the Cu 2 Cd 1-z Mn z GeSe 4 system, in addition to the tetragonal stannite α and the wurtz-stannite δ phases, MnSe was found to exist in the diagram. The DTA experiments showed that the cooling curves for both systems exhibited effects of undercooling

  8. Mars Geochemical Instrument (MarGI): An instrument for the analysis of the Martian surface and the search for evidence of life

    Science.gov (United States)

    Kojiro, Daniel R.; Mancinelli, Rocco; Martin, Joe; Holland, Paul M.; Stimac, Robert M.; Kaye, William J.

    2005-01-01

    The Mars Geochemical Instrument, MarGI, was developed to provide a comprehensive analysis of the rocks and surface material on Mars. The instrument combines Differential Thermal Analysis (DTA) with miniature Gas Chromatography-Ion Mobility Spectrometry (GC-IMS) to identify minerals, the presence and state of water, and organic compounds. Miniature pyrolysis ovens are used to both, conduct DTA analysis of soil or crushed rocks samples, and pyrolyze the samples at temperatures up to 1000 degrees C for GC-IMS analysis of the released gases. This combination of analytical processes and techniques, which can characterize the mineralogy of the rocks and soil, and identify and quantify volatiles released during pyrolysis, has applications across a wide range of target sites including comets, planets, asteroids, and moons such as Titan and Europa. The MarGI analytical approach evolved from the Cometary Ice and Dust Experiment (CIDEX) selected to fly on the Comet Rendezvous Asteroid Flyby Mission (CRAF).

  9. Solid State Formation Mechanism of Li4Ti5O12 from an Anatase TiO2 Source

    DEFF Research Database (Denmark)

    Shen, Yanbin; Søndergaard, Martin; Christensen, Mogens

    2014-01-01

    Solid state synthesis of Li4Ti5O12 anode material for Li ion batteries typically results in products containing rutile TiO2 and Li2TiO3 impurities, and subsequent high calcination temperatures lead to particle growth that reduces capacity and rate ability. Here, the formation and growth of Li4Ti5O......12 particles by a solid-state reaction using anatase TiO2 with various crystallite sizes and Li2CO3 is investigated by in situ high temperature powder X-ray diffraction (HT-PXRD) and thermal gravimetry-differential thermal analysis (TG-DTA). The combined data provide insight into the origin...... crystallite sizes (∼50 nm, ∼30 nm, ∼20 nm, and amorphous) were explored, and decreasing crystallite sizes causes a reduced initial reaction temperature. Using anatase with a crystallite size of ∼20 nm resulted in phase pure Li4Ti5O12 at the lowest temperature (800 °C). PXRD and TG-DTA results also revealed...

  10. The constitution of the ternary system Ti-Ni-C; Die Konstitution des Dreistoffes Ti-Ni-C

    Energy Technology Data Exchange (ETDEWEB)

    Schuster, J.C.; Du, Y. [Technische Univ., Vienna (Austria). Inst. fuer Physikalische Chemie

    1998-12-31

    The system Ti-Ni-C was completely re-examined taking a new approach applying XRD, DTA, SEM-EDX and light microscopy, for elaboration of a complete thermodynamic description of the system. The carbon solubility in the binary Ti-Ni compounds is of significance only in the Ti{sub 2}Ni phase, and was found to be 4 at% at 900 C. The thermodynamic description thus achieved enables precise determination of the solubilities of Ti and C in solid or liquid nickel. (orig./CB) [Deutsch] Das System Ti-Ni-C wurde mittels XRD, DTA, SEM-EDX und Lichtmikroskopie umfassend neu untersucht mit dem Ziel, eine komplette thermodynamische Beschreibung zu ermoeglichen. Die Kohlenstoffloeslichkeit in den binaeren Ti-Ni Verbindungen ist nur fuer die Phase Ti{sub 2}Ni signifikant. Bei 900 C betrug sie 4 at% C. Die erarbeitete thermodynamische Beschreibung erlaubt eine praezise Darstellung der Ti- und C-Loeslichkeiten in festem und fluessigem Nickel. (orig.)

  11. Crystallization kinetic of clear burning kaolinitic clay; Cinetica de cristalizacao de argila caulinitica de queima clara

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.A.; Medeiros, J.; Teixeira, S.R. [Universidade Estadual Paulista (DFQB/FCT/UNESP), Presidente Prudente, SP (Brazil). Fac. de Ciencias e Tecnologia. Dept. de Fisica, Quimica e Biologia

    2009-07-01

    It was studied the crystallization kinetics of one caulinitic clay of clear burning, from Teodoro Sampaio (SP) region. Differential thermal analysis (DTA), X-ray diffraction (XRD) and X-ray fluorescence (XRF) had been used in the development of the work. Non-isothermal methods had been used for attainment of the kinetic data and in the determination of the crystallization mechanisms. The exothermic peak associate to the crystallization is located between 900 and 1000 deg C, varying in accordance with the heating rate of the sample. The activation energies were taken using the data of thermal analysis (DTA) and the methods of Kissinger (700 kJ/mol) and Ligero (721 kJ/mol). The Avrami constant n was calculated using Ligero and the m parameter was obtained using Matusita method and the n and E of Ligero. Both values (1.17) are close to 1, indicating growth in two dimensions with morphology of plates and nucleation of surface as dominant mechanism. (author)

  12. Characterization of the calcium-fluoroaluminosilicate glass prepared by a non-hydrolytic sol-gel route for future dental application as glass ionomer cement

    Directory of Open Access Journals (Sweden)

    Alexandre Cestari

    2009-06-01

    Full Text Available Glass ionomer cements are widely employed in dentistry due to their physical, biological and mainly anti-caries properties. Glass ionomers consist of an aluminosilicate glass matrix modified with other elements, and they contain large quantities of fluorine. In this study, we report on the preparation of calcium-fluoroaluminosilicate glasses by a nonhydrolytic sol-gel route as an alternative approach to obtaining alumina-silica matrices. The glass powders were prepared via the non-hydrolytic sol-gel method, by mixing AlCl3, SiCl4, CaF2, AlF3, NaF, and AlPO4. The powders were studied by thermal analysis (TG/DTA/DSC, photoluminescence (PL, nuclear magnetic resonance (NMR27Al-29Si, and X ray diffraction (XRD. TG/DTA/DSC analyses revealed a constant mass loss due to structural changes during the heating process, which was confirmed by NMR and PL. A stable aluminosilicate matrix with potential future application as a glass ionomer base was obtained.

  13. Synthesis of Cr(III-Morin Complex: Characterization and Antioxidant Study

    Directory of Open Access Journals (Sweden)

    Qadeer K. Panhwar

    2014-01-01

    Full Text Available The complex formation between Cr(III and morin was carried out in methanol and confirmed by analytical characterization using UV-Vis, IR, 1H NMR, and TG-DTA. UV-Vis shows significant bathochromic shift in benzoyl upon coordination as well as IR well illustrates the peak shift of C=O group and formation of a O–Cr(III bond. Likewise, 1H NMR studies clarify that Cr(III metal ion replaces the 5OH proton hence; 5-hydroxy-4-keto site is employed by morin in chelation to form six-membered stable ring system out of three available chelating sites. In addition, TG-DTA denotes the presence of coordinated and crystalline water molecules. The melting point of the complex was found to be 389°C by DSC. In addition, Cr(III-morin complex was found to be a more potent antioxidant than morin as evaluated by DPPH• and FRAP methods.

  14. Rare-earth metal compounds with a novel ligand 2-methoxycinnamylidenepyruvate: A thermal and spectroscopic approach

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, C.T., E-mail: claudiocarvalho@ufgd.edu.br [Federal University of Grande Dourados, UFGD, 79.804-970 Dourados, MS (Brazil); Oliveira, G.F. [Federal University of Grande Dourados, UFGD, 79.804-970 Dourados, MS (Brazil); Fernandes, J. [Federal University of Grande Dourados, UFGD, 79.804-970 Dourados, MS (Brazil); Federal University of Mato Grosso, UFMT, 78.060-900 Cuiabá, MT (Brazil); Federal University of Goiás, UFG, 74.690-900, Goiânia, GO (Brazil); Institute of Chemistry, UNESP, 14.801-970 Araraquara, SP (Brazil); Siqueira, A.B. [Federal University of Mato Grosso, UFMT, 78.060-900 Cuiabá, MT (Brazil); Ionashiro, E.Y. [Federal University of Goiás, UFG, 74.690-900, Goiânia, GO (Brazil); Ionashiro, M. [Institute of Chemistry, UNESP, 14.801-970 Araraquara, SP (Brazil)

    2016-08-10

    Highlights: • 2-Methoxycinnamylidenepyruvate as a novel ligand for the synthesis of complexes. • Complexes with well-defined structural arrangements. • Thermal decomposition dependent on the nature of the metal ion. • Study by TG/FT-IR and TG/MS of the gaseous products released. • Potential technological application. - Abstract: Compounds of 2-methoxycinnamylidenepyruvate with trivalent lanthanide ions (Tb, Ho, Er, Tm, Yb and Lu) were obtained in solid state and studied mainly in terms of their thermal and spectroscopic properties. The analyses of the characterization were performed by thermogravimetric system coupled to a mass and infrared spectrometer (TG–DTA/MS and TG–DTA/FT-IR), X-ray powder diffractometry, differential scanning calorimetry (DSC), infrared (FT-IR), preliminary study of fluorescence as well as classical technique of titration with EDTA. From these results, it was possible to establish the stoichiometry, thermal behavior, hydration water content, and the gaseous products released in the thermal decomposition steps, and suggest the type of metal-ligand coordination.

  15. Using thermal and spectroscopic data to investigate the thermal behavior of epinephrine

    Energy Technology Data Exchange (ETDEWEB)

    Bannach, Gilbert; Cervini, Priscila [Instituto de Quimica de Sao Carlos - IQSC/USP, C.P. 780, CEP 13560-970, Sao Carlos, SP (Brazil); Cavalheiro, Eder Tadeu Gomes, E-mail: cavalheiro@iqsc.usp.br [Instituto de Quimica de Sao Carlos - IQSC/USP, C.P. 780, CEP 13560-970, Sao Carlos, SP (Brazil); Ionashiro, Massao [Instituto de Quimica, UNESP, C.P. 355, CEP 14801-970, Araraquara, SP (Brazil)

    2010-02-20

    Epinephrine is a neurotransmitter of the catecholamine class that acts in the mammalian central nervous system. The TG-DTA curves of epinephrine showed that the anhydrous compound starts decomposition at 165 {sup o}C, under the conditions used in this work. The reflectance FTIR spectra and X-ray powder diffraction patterns of epinephrine before and after heating up to 210 {sup o}C, as well as the TG-FTIR spectra of sample heated between 30 and 600 {sup o}C, were obtained and reveled that after heating, structural changes occurred in the sample. At temperatures higher than 205 {sup o}C the thermal decomposition took place with elimination of methylamine in agreement with the first mass loss observed in the TG curve in both air and N{sub 2} atmospheres (TG = 17.0%, calcd. = 17.0%). The melting was observed at 205 {sup o}C (DTA) or 203 {sup o}C (DSC) but this process occurred overlapped with decomposition characteristic of an incongruent melting process.

  16. Recommendations for reporting of systematic reviews and meta-analyses of diagnostic test accuracy: a systematic review

    NARCIS (Netherlands)

    McGrath, Trevor A.; Alabousi, Mostafa; Skidmore, Becky; Korevaar, Daniël A.; Bossuyt, Patrick M. M.; Moher, David; Thombs, Brett; McInnes, Matthew D. F.

    2017-01-01

    This study is to perform a systematic review of existing guidance on quality of reporting and methodology for systematic reviews of diagnostic test accuracy (DTA) in order to compile a list of potential items that might be included in a reporting guideline for such reviews: Preferred Reporting Items

  17. Clinical presentation of infants hospitalised with pertussis

    African Journals Online (AJOL)

    [7] In SA, whole-cell pertussis vaccine (administered as a trivalent vaccine to include tetanus and diphtheria) was replaced by acellular pertussis vaccine in 2009. The pentavalent vaccine (diphtheria, tetanus, acellular pertussis, inactivated polio vaccine and haemophilus influenza type b (DTaP-. IPV/Hib) was also introduced ...

  18. Crystallization study of amorphous system Fe[sub 84-x]W[sub x]B[sub 16] (x = 3; 5)

    Energy Technology Data Exchange (ETDEWEB)

    Novakova, A.A.; Sidorova, G.V.; Kiseleva, T.Yu.; Szasz, A. (Dept. of Physics, State Univ., Moscow (Russia) Inst. of Metallurgy, Academy of Science, Moscow (Russia) Eoetvoes Univ., Budapest (Hungary))

    1992-10-01

    A complex study of the crystallization process of the amorphous system was carried out by Moessbauer spectroscopy, X-ray diffraction and DTA. Alloy samples crystallized at 600deg C contain the following phases: [alpha]-Fe, Fe[sub 3]B and solid solution (Fe, W)[sub 3]B. (orig.).

  19. Thermogravimetric and differential thermal analysis of potassium bicarbonate contaminated cellulose

    Science.gov (United States)

    A. Broido

    1966-01-01

    When samples undergo a complicated set of simultaneous and sequential reactions, as cellulose does on heating, results of thermogravimetric and differential thermal analyses are difficult to interpret. Nevertheless, careful comparison of pure and contaminated samples, pyrolyzed under identical conditions, can yield useful information. In these experiments TGA and DTA...

  20. Non isothermal kinetic study of the aluminium titanate formation in alumina-titania mixtures

    Directory of Open Access Journals (Sweden)

    N. M. Rendtorff

    2014-09-01

    Full Text Available Aluminum titanate (Al2TiO5 is a high refractoriness material with excellent thermal shock resistance. Hence it is suitable for several applications at elevated temperatures where insulation and thermal shock resistance are required. Such as components of internal combustion engines, exhaust port liners, metallurgy, and thermal barriers. The thermal instability of Al2TiO5 at high temperature is another characteristic of this material that has been studied and controlled by the incorporation of several additives. The Al2TiO5 formation from pure oxides presents an endothermic peak in the differential thermal analysis (DTA. The thermodynamic temperature is 1280 ºC. But experimentally, as in every other DTA experiment, these peaks strongly depend on the heating rate: this fact has been extensively employed for the kinetic study of transformation processes and the mechanism determination of chemical reactions. Both activation energies (Ea and nucleation rates can be obtained from these experiments. The present work reports the formation Ea of Al2TiO5 prepared from pure oxides at air atmosphere by the Kissinger DTA based methods. Previously the particle size distribution of the starting powders together with X-ray diffraction analysis of the starting powders and the resulting materials was carried out. The properties of the Al2TiO5 formation were grouped into two groups corresponding to the low and high heating rates, below and over 5 K/min. Ea values were obtained after the Avrami (n constant evidenced that the crystallization mechanism is strongly related to the heating rate, even in the wide range studied which includes the technological ones(0.5-40 K/min.

  1. The sensitivity of patient specific IMRT QC to systematic MLC leaf bank offset errors

    International Nuclear Information System (INIS)

    Rangel, Alejandra; Palte, Gesa; Dunscombe, Peter

    2010-01-01

    Purpose: Patient specific IMRT QC is performed routinely in many clinics as a safeguard against errors and inaccuracies which may be introduced during the complex planning, data transfer, and delivery phases of this type of treatment. The purpose of this work is to evaluate the feasibility of detecting systematic errors in MLC leaf bank position with patient specific checks. Methods: 9 head and neck (H and N) and 14 prostate IMRT beams were delivered using MLC files containing systematic offsets (±1 mm in two banks, ±0.5 mm in two banks, and 1 mm in one bank of leaves). The beams were measured using both MAPCHECK (Sun Nuclear Corp., Melbourne, FL) and the aS1000 electronic portal imaging device (Varian Medical Systems, Palo Alto, CA). Comparisons with calculated fields, without offsets, were made using commonly adopted criteria including absolute dose (AD) difference, relative dose difference, distance to agreement (DTA), and the gamma index. Results: The criteria most sensitive to systematic leaf bank offsets were the 3% AD, 3 mm DTA for MAPCHECK and the gamma index with 2% AD and 2 mm DTA for the EPID. The criterion based on the relative dose measurements was the least sensitive to MLC offsets. More highly modulated fields, i.e., H and N, showed greater changes in the percentage of passing points due to systematic MLC inaccuracy than prostate fields. Conclusions: None of the techniques or criteria tested is sufficiently sensitive, with the population of IMRT fields, to detect a systematic MLC offset at a clinically significant level on an individual field. Patient specific QC cannot, therefore, substitute for routine QC of the MLC itself.

  2. Immunogenicity and safety after booster vaccination of diphtheria, tetanus, and acellular pertussis in young adults: an open randomized controlled trial in Japan.

    Science.gov (United States)

    Hara, Megumi; Okada, Kenji; Yamaguchi, Yuko; Uno, Shingo; Otsuka, Yasuko; Shimanoe, Chisato; Nanri, Hinako; Horita, Mikako; Ozaki, Iwata; Nishida, Yuichiro; Tanaka, Keitaro

    2013-12-01

    The recent increase of pertussis in young adults in Japan is hypothesized to be due in part to waning protection from the acellular pertussis vaccine. While a booster immunization may prevent an epidemic of pertussis among these young adults, little is known about the safety and immunogenicity of such a booster with the diphtheria, tetanus, and acellular pertussis vaccine (DTaP), which is currently available in Japan. One hundred and eleven medical students with a mean age of 19.4 years were randomly divided into 2 groups of 55 and 56 subjects and received, respectively, 0.2 or 0.5 ml of DTaP. Immunogenicity was assessed by performing the immunoassay using serum, and the geometric mean concentration (GMC), GMC ratio (GMCR), seropositive rate, and booster response rate were calculated. Adverse reactions and adverse events were monitored for 7 days after vaccination. After booster vaccination in the two groups, significant increases were found in the antibodies against pertussis toxin, filamentous hemagglutinin, diphtheria toxoid, and tetanus toxoid, and the booster response rates for all subjects reached 100%. The GMCs and GMCRs against all antigens were significantly higher in the 0.5-ml group than in the 0.2-ml group. No serious adverse events were observed. Frequencies of local reactions were similar in the 2 groups, although the frequency of severe local swelling was significantly higher in the 0.5-ml group. These data support the acceptability of booster immunization using both 0.2 and 0.5 ml of DTaP for young adults for controlling pertussis. (This study was registered at UMIN-CTR under registration number UMIN000010672.).

  3. Demanda de irrigação suplementar para a cultura do milho no estado de Minas Gerais Demand of supplemental irrigation for corn in the state of Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Roberto Araújo de Faria

    2000-04-01

    Full Text Available Com o emprego de um modelo de balanço hídrico e de técnicas de sistema de informações geográficas, a demanda máxima diária de irrigação suplementar para a cultura do milho, no Estado de Minas Gerais, foi simulada e espacializada. Consideraram-se solos de textura grossa (disponibilidade total de água - DTA: 0,6 mm cm-1, média (DTA = 1,2 mm cm-1 e fina (DTA = 1,8 mm cm-1. As precipitações dependentes diárias foram estimadas em nível de 75% de probabilidade, utilizando-se a distribuição gama, enquanto a evapotranspiração diária foi em nível de 50% de probabilidade, utilizando-se o modelo proposto por Penman-Monteith (Smith, 1991. Identificou-se, espacialmente, a melhor época de plantio para o milho, considerando-se a menor demanda de irrigação.Using a soil water balance model and a geographical information system, the daily maximum demand of supplemental irrigation for corn in the state of Minas Gerais was simulated and spacialized, for coarse (total available water - TAW: 0.6 mm cm-1, medium (TAW = 1.2 mm cm-1 and fine (TAW = 1.8 mm cm-1 soils. The daily dependable precipitations were estimated using the gamma distribution at 75% of probability and the daily evapotranspiration was computed using the Penman-Monteith (Smith, 1991 with 50% probability. The best planting date considering the lower supplemental irrigation demand was spacialized.

  4. Perfis Diferenciais de Perda de Memória entre a Demência Frontotemporal e a do Tipo Alzheimer

    Directory of Open Access Journals (Sweden)

    Allegri Ricardo F.

    2001-01-01

    Full Text Available Os estados iniciais da demência tipo Alzheimer (DTA caracterizam-se classicamente por deterioração da memória enquanto que as mudanças de conduta e de personalidade aparecem nas etapas iniciais da demência frontotemporal (DFT. Entretanto, na prática clínica, o diagnóstico diferencial é difícil. O objetivo do presente trabalho foi estudar o rendimento da memória de pacientes com DTA (n= 20 e com DFT (n= 20 comparando-o com um grupo de controles (n = 20. Os pacientes, emparelhados por idade e escolaridade, foram avaliados com uma bateria neuropsicológica exaustiva. Para a avaliação da memória, examinou-se a "queixa subjetiva" de perda de memória (memória subjetiva, a aprendizagem de uma lista de palavras (memória episódica e o desempenho no teste de denominação de Boston (memória semântica. As pontuações de ambos os grupos de pacientes, na grande maioria das provas, foram significativamente inferiores às dos controles. Os pacientes com DTA mostraram uma deterioração global da memória episódica (tipo amnésia e semântica com um alto nível de queixa subjetiva. Os sujeitos com DFT, por outro lado, apresentaram um déficit de memória importante na recuperação da informação, mas com melhores capacidades de registro da informação, apesar das dificuldades de reconhecimento do seu distúrbio.

  5. The sensitivity of patient specific IMRT QC to systematic MLC leaf bank offset errors

    Energy Technology Data Exchange (ETDEWEB)

    Rangel, Alejandra; Palte, Gesa; Dunscombe, Peter [Department of Medical Physics, Tom Baker Cancer Centre, 1331-29 Street NW, Calgary, Alberta T2N 4N2, Canada and Department of Physics and Astronomy, University of Calgary, 2500 University Drive North West, Calgary, Alberta T2N 1N4 (Canada); Department of Medical Physics, Tom Baker Cancer Centre, 1331-29 Street NW, Calgary, Alberta T2N 4N2 (Canada); Department of Medical Physics, Tom Baker Cancer Centre, 1331-29 Street NW, Calgary, Alberta T2N 4N2 (Canada); Department of Physics and Astronomy, University of Calgary, 2500 University Drive NW, Calgary, Alberta T2N 1N4 (Canada) and Department of Oncology, Tom Baker Cancer Centre, 1331-29 Street NW, Calgary, Alberta T2N 4N2 (Canada)

    2010-07-15

    Purpose: Patient specific IMRT QC is performed routinely in many clinics as a safeguard against errors and inaccuracies which may be introduced during the complex planning, data transfer, and delivery phases of this type of treatment. The purpose of this work is to evaluate the feasibility of detecting systematic errors in MLC leaf bank position with patient specific checks. Methods: 9 head and neck (H and N) and 14 prostate IMRT beams were delivered using MLC files containing systematic offsets ({+-}1 mm in two banks, {+-}0.5 mm in two banks, and 1 mm in one bank of leaves). The beams were measured using both MAPCHECK (Sun Nuclear Corp., Melbourne, FL) and the aS1000 electronic portal imaging device (Varian Medical Systems, Palo Alto, CA). Comparisons with calculated fields, without offsets, were made using commonly adopted criteria including absolute dose (AD) difference, relative dose difference, distance to agreement (DTA), and the gamma index. Results: The criteria most sensitive to systematic leaf bank offsets were the 3% AD, 3 mm DTA for MAPCHECK and the gamma index with 2% AD and 2 mm DTA for the EPID. The criterion based on the relative dose measurements was the least sensitive to MLC offsets. More highly modulated fields, i.e., H and N, showed greater changes in the percentage of passing points due to systematic MLC inaccuracy than prostate fields. Conclusions: None of the techniques or criteria tested is sufficiently sensitive, with the population of IMRT fields, to detect a systematic MLC offset at a clinically significant level on an individual field. Patient specific QC cannot, therefore, substitute for routine QC of the MLC itself.

  6. Control selection and confounding factors: A lesson from a Japanese case-control study to examine acellular pertussis vaccine effectiveness.

    Science.gov (United States)

    Ohfuji, Satoko; Okada, Kenji; Nakano, Takashi; Ito, Hiroaki; Hara, Megumi; Kuroki, Haruo; Hirota, Yoshio

    2017-08-24

    When using a case-control study design to examine vaccine effectiveness, both the selection of control subjects and the consideration of potential confounders must be the important issues to ensure accurate results. In this report, we described our experience from a case-control study conducted to evaluate the effectiveness of acellular pertussis vaccine combined with diphtheria-tetanus toxoids (DTaP vaccine). Newly diagnosed pertussis cases and age- and sex-matched friend-controls were enrolled, and the history of DTaP vaccination was compared between groups. Logistic regression models were used to calculate odds ratios (ORs) and 95% confidence intervals (CIs) of vaccination for development of pertussis. After adjustment for potential confounders, four doses of DTaP vaccination showed a lower OR for pediatrician-diagnosed pertussis (OR=0.11, 95% CI, 0.01-0.99). In addition, the decreasing OR of four doses vaccination was more pronounced for laboratory-confirmed pertussis (OR=0.07, 95%CI, 0.01-0.82). Besides, positive association with pertussis was observed in subjects with a history of steroid treatment (OR=5.67) and those with a recent contact with a lasting cough (OR=4.12). When using a case-control study to evaluate the effectiveness of vaccines, particularly those for uncommon infectious diseases such as pertussis, the use of friend-controls may be optimal due to the fact that they shared a similar experience for exposure to the pathogen as the cases. In addition, to assess vaccine effectiveness as accurately as possible, the effects of confounding should be adequately controlled with a matching or analysis technique. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  7. Conventional versus frozen elephant trunk surgery for extensive disease of the thoracic aorta.

    Science.gov (United States)

    Di Eusanio, Marco; Borger, Michael; Petridis, Francesco D; Leontyev, Sergey; Pantaleo, Antonio; Moz, Monica; Mohr, Friedrich; Di Bartolomeo, Roberto

    2014-11-01

    To compare early and mid-term outcomes after repair of extensive aneurysm of the thoracic aorta using the conventional elephant trunk or frozen elephant trunk (FET) procedures. Fifty-seven patients with extensive thoracic aneurysmal disease were treated using elephant trunk (n = 36) or FET (n = 21) procedures. Patients with aortic dissection, descending thoracic aorta (DTA) diameter less than 40 mm, and thoracoabdominal aneurysms were excluded from the analysis, as were those who did not undergo antegrade selective cerebral perfusion during circulatory arrest. Short-term and mid-term outcomes were compared according to elephant trunk/FET surgical management. Preoperative and intraoperative variables were similar in the two groups, except for a higher incidence of female sex, coronary artery disease and associated procedures in elephant trunk patients. Hospital mortality (elephant trunk: 13.9% versus FET: 4.8%; P = 0.2), permanent neurologic dysfunction (elephant trunk: 5.7% versus FET: 9.5%; P = 0.4) and paraplegia (elephant trunk: 2.9% versus FET: 4.8%; P = 0.6) rates were similar in the two groups. Follow-up was 100% complete. In the elephant trunk group, 68.4% of patients did not undergo a second-stage procedure during follow-up for a variety of reasons. Of these patients, the DTA diameter was greater than 51 mm in 72.2% and two (6.7%) died due to aortic rupture while awaiting stage-two intervention. Endovascular second-stage procedures were successfully performed in all FET patients with residual DTA aneurysmal disease (n = 3), whereas nine of 11 elephant trunk patients who returned for second-stage procedures required conventional surgical replacement through a lateral thoracotomy. Kaplan-Meier estimate of 4-year survival was 75.8 ± 7.6 and 72.8 ± 10.6 in elephant trunk and FET patients, respectively (log-rank P = 0.8). In patients with extensive aneurysmal disease of thoracic aorta, elephant trunk and FET procedures

  8. Relaxation processes and structural transformations in amorphous Co-Fe-Si-B alloys

    International Nuclear Information System (INIS)

    Dus-Sitek, M.; Olszowski, Z.

    1994-01-01

    The thermostimulated electron emission (TSEE) method was applied for determination of relaxation and crystallization processes in amorphous alloys. By using the analogy of DTA-method, the activation energy of relaxation and crystallization processes has been determined from the measurements of changes of TSEE temperature maxima depending on the heating rate

  9. Calcium ferrite formation from the thermolysis of calcium tris (maleato)

    Indian Academy of Sciences (India)

    For preparing calcium ferrite, calcium tris (maleato) ferrate(III) precursor was prepared by mixing aqueous solutions of iron(III) maleate, calcium maleate and maleic acid. Various physico-chemical techniques i.e. TG, DTG, DTA, Mössbauer, XRD, IR etc have been used to study the decomposition behaviour from ambient to ...

  10. Thermal behaviour of strontium tartrate single crystals grown in gel

    Indian Academy of Sciences (India)

    Thermal behaviour of strontium tartrate crystals grown with the aid of sodium metasilicate gel is investigated using thermogravimetry (TG) and differential thermal analysis (DTA). Effect of magnetic field and dopant (Pb)2+ on the crystal stability is also studied using thermal analysis. This study reveals that water molecules are ...

  11. Measles-mumps-rubella vaccination and respiratory syncytial virus-associated hospital contact

    DEFF Research Database (Denmark)

    Sørup, Signe; Benn, Christine Stabell; Stensballe, Lone Graff

    2015-01-01

    -confirmed RSV hospital contacts at age 14-23 months in all children born in Denmark 1997-2002 who had already received the vaccine against diphtheria, tetanus, pertussis (acellular), polio, and Haemophilus influenzae type b (DTaP-IPV-Hib) at the recommended ages of 3, 5, and 12 months. RESULTS: The study...

  12. based gel polymer electrolytes

    Indian Academy of Sciences (India)

    (PVdF) as a host polymer, lithium perchlorate (LiClO4), lithium triflate ... TG/DTA studies showed the thermal stability of the polymer electrolytes. .... are observed while comparing pure XRD spectra with .... batteries as its operating temperature is normally in the .... chain ion movements and the conductivity of the polymer.

  13. Meningococcal Vaccine (For Parents)

    Science.gov (United States)

    ... previous dose of meningococcal vaccine, to the DTaP vaccine , or to latex If your child has a history of Guillain-Barré syndrome (a disease of the nervous system that causes progressive weakness), talk to your doctor about whether the vaccines are a good idea. Caring for Your Child ...

  14. Synthesis and characterization of Th(IV) complex of bis-schiff base from o-vanillin and o-phenylene diamine

    International Nuclear Information System (INIS)

    Fan Yuhua; Bi Caifeng; Bao Meng

    1997-01-01

    The new solid complex of thorium nitrate with bis-schiff base (L) derived from o-vanillie and o-phenylene diamine has been synthesized and characterized by elemental analysis, DTA-TG, IR, UV and molar conductance analysis. The composition of the complex is confirmed to be ThL(NO 3 ) 4

  15. Synthesis and characterization of Th(IV) and U(VI) complexes with o-vanillin-p-phenylenediamine

    International Nuclear Information System (INIS)

    Bi Caifeng; Fan Yuhua; Sun Guoxin; Chang Jun

    2000-01-01

    Two new solid complexes, [ThL(NO 3 ) 2 ](NO 3 ) 2 , [UO 2 L(NO 3 )]NO 3 (L = o-vanillin-p-phenylenediamine) have been synthesized and characterized by elemental analyses, DTA-TG, IR spectra, UV spectra and molar conductance. Possible structures of the two complexes are proposed. (author)

  16. Stability of trapped electrons in thermally modified alcohol-alcohol and alcohol-water glasses

    International Nuclear Information System (INIS)

    Chlebosz, G.; Kalecinski, J.

    1996-01-01

    Absorption spectra of e t - , DTA and dielectric losses measurements of frozen irradiated matrices of different composition of alcohol-water and alcohol-alcohol have been studied as a function of temperature. In ethylene glycol-water and glycerol-water systems irregularity of e t - decay might be caused by inhomogeneity of the glasses. (author)

  17. Synthesis of 3-(4,5-dihydroimidazol-1-YL)propyltriethoxysilane bound Ru(II) complex bearing viologen segment

    International Nuclear Information System (INIS)

    Gurbuz, N.; Seckin, T.; Ozdemir, I.; Cetinkaya, B.

    2005-01-01

    The nanostructured metallopolymers consisting of the partially quaternized 3-(4,5-dihydroimidazol-1-yl)propyl having the viologen group linked covalently through the alkyl spacer its Ru(II) complex have been prepared by sol-gel method. Structural elucidation was done with Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and differential thermal analysis (DTA) [ru

  18. Carboxymethylated-, hydroxypropylsulfonated- and quaternized xylan derivative films

    Science.gov (United States)

    Ivan Simkovic; Ivan Kelnar; Iveta Uhliarikova; Raniero Mdndichi; Anurag Mandalika; Thomas Elder

    2014-01-01

    Under alkaline/water conditions carboxymethyl, 2-hydroxypropylsulfonate and trimethylammonium-2-hydroxypropyl groups were introduced into xylan in one step with the goal to prepare film specimens. The materials were characterized by NMR, SEC-MALS, TG/DTG/DTA, AFM and mechanical testing. The properties of triple, double and mono-substituted materials were compared. The...

  19. On the oxygen deficiency of high-Tc Y1Ba2Cu3O7-μ ceramics

    International Nuclear Information System (INIS)

    Szasz, A.; Dankhazi, Z.; Kojnok, J.; Trager, T.; Matrai, J.; Gyorgy, I.; Kirchmayr, H.; Mueller, H.; Watson, L.M.

    1991-01-01

    The role of oxygen deficiency in Y 1 Ba 2 Cu 3 O 7-μ ceramics was investigated by differential thermal analysis (DTA), differential thermogravimetry (DTG), linear thermal expansion (LTE), and by soft x-ray fluorescence spectroscopy (SXFS). The interdependence of the measured parameters and some of the stability criteria are discussed

  20. Optimization of lead (ii) ions adsorption on to chemically activated ...

    African Journals Online (AJOL)

    The derivative thermal analysis (DTA) and thermogravimetric analysis (TGA) profile of the activated carbon were employed in the proximate analysis. The BET surface area shows a high microporous surface area and micropore volume of 840.38 m2/g and 0.30 cc/g respectively which aids sorption efficiency. The adsorption ...

  1. Preparation of Nd-doped barium cerate through different routes

    DEFF Research Database (Denmark)

    Chen, F.L.; Toft Sørensen, O.; Meng, G.Y.

    1997-01-01

    BaCe0.9Nd0.1O3-delta was prepared through different routes: oxalate coprecipitation (OF), carbonate-oxide mixed by ball-milling (COB) and carbonate-oxide mixed by mortar/pestle (COM). The reaction process studied by DTA-TG and XRD showed that calcination of the precursor powders at T greater than...

  2. Control of crystallization kinetics and study of the thermal, structural and morphological properties of an Li{sub 2}O-B{sub 2}O{sub 3}-Al{sub 2}O{sub 3} vitreous system

    Energy Technology Data Exchange (ETDEWEB)

    Dantas, Noelio O.; Silva, Valdeir A., E-mail: noelio@ufu.br [Universidade Federal de Uberlandia (LNMIS/UFU), MG (Brazil). Instituto de Fisica. Laboratorio de Novos Materials Isolantes a Semicondutores; Neto, O.O.D. [Universidade Federal de Uberlandia (GOIQ/UFU), MG (Brazil). Instituto de Fisica. Grupo de Optica e Informacao Quantica; Nascimento, Marcio L.F. [Vitreous Materials Laboratory, Institute of Humanities, Arts and Sciences, Federal University of Bahia, Salvador, BA (Brazil); PROTEC/PEI-Postgraduate Program in Industrial Engineering, Department of Chemical Engineering. Polytechnic School, Federal University of Bahia, Salvador (Brazil)

    2012-07-01

    A glass matrix with nominal composition 50Li{sub 2}O.45B{sub 2}O{sub 3}.5Al{sub 2}O{sub 3} (mol%) was synthesized, and its physical properties were investigated by differential thermal analysis (DTA), X-ray diffraction (XRD), and atomic force microscopy (AFM). The glass transition temperature T{sub g}, the crystallization-onset temperature T{sub x}, the crystallization peak temperatures T{sub c1} and T{sub c2}. and the fusion peak temperatures T{sub m1} and T{sub m2} were determined from at least two glass matrix phases to be approximately 382, 457, 486, 574, 761, and 787 °C, respectively, at 5 °C/min heating rate. Heat treatments at 450 °C for an increasing sequence of time intervals allowed control over the amount of crystallization. Additional information on the crystallization kinetics for the LBA glass matrix was gathered from AFM images, DTA thermograms, and XRD diffractograms. The latter technique showed that LiBO{sub 2} (ICDD-16568) and Li{sub 3}AIB{sub 2}O{sub 6} (ICDD- 51754) phases are formed in the glass-ceramic system. Debye-Schemer analysis of the XRD peaks revealed a competition between the evolutions of crystal phases during heat treatment. Activation energies for crystallization, obtained from theoretical models applied to the DTA data showed that the crystallization is heterogeneous. The AFM images demonstrated that this heterogeneous crystallization starts at the surface of the LBA glass matrix and identified crystal sizes in agreement with the results of the Debye-Schemer analysis. Our study shows that thermal and structural characterization techniques can be combined with theoretical results drawn from well-tested models to offer a unified view of crystallization in a glass-ceramics system. (author)

  3. Comparative evaluation of Map-Check and Arc-Check for dosimetric verification in patients treaties with IMRT; Evaluacion comparativa de MapCHECK y ArcCHECK para verificacion dosimetrica en pacientes tratados con IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, B.; Marquina, J.; Ramirez, J.; Gonzales, A., E-mail: bertha.garcia@aliada.com.pe [ALIADA, Oncologia Integral, Av. Jose Galvez Barrenechea 1044, San Isidro, Lima 27 (Peru)

    2014-08-15

    The dosimetric controls that are realized to the patients in the Intensity-Modulated Radiation Therapy (IMRT) and Volumetric Modulated Arc Therapy (VMAT) techniques; are indispensable since allows in real time to verify the quantity of imparted dose to the patient, these controls should be carried out every time that will begin a treatment, because these techniques impart dose dynamically modulating the dose intensity and movements of the Multi leaf Collimator (MLC), for they exist different diodes devices prepared in spiral (3-D) and planar form (2-D); that allows to estimate the dose fluence in a certain area. Treatment studies for head and neck with IMRT were compared regarding the reading average carried out by the diodes in the corresponding areas, using the criteria of the gamma index like dose difference 3% or 3m m of distance for both diode arrangements, in the IMRT case was found in Arc-Check a minor difference of 3/3 for an average of 99.37% of read diodes in a correct way contrary to the reading obtained with the Map-Check 3/3 an average of difference of 96.19%; in IMRT the difference was lower due to different factors like sensibility of the diodes reading, resolution, diodes disposition, as well as the average reading of entrance and exit of the radiation beams. Within the parameters delivered by the diodes arrangement is considered the positioning correction for both acceptance indexes like the gamma factor and the Distance-to-agreement (Dta), the existent difference of reading in factor gamma and Dta fundamentally is the way in like they compare the dose distribution; the Gamma uses dose averages of high and low gradients and Dta use only averages of areas of high gradients between the nearest points giving the distance as a result among the distribution point and the nearest point what makes stricter. (Author)

  4. SU-C-BRD-03: Closing the Loop On Virtual IMRT QA

    International Nuclear Information System (INIS)

    Valdes, G; Scheuermann, R; Y, H C.; Olszanski, A; Bellerive, M; Solberg, T

    2015-01-01

    Purpose: To develop an algorithm that predicts a priori IMRT QA passing rates. Methods: 416 IMRT plans from all treatment sites were planned in Eclipse version 11 and delivered using a dynamic sliding window technique on Clinac iX or TrueBeam linacs (Varian Medical Systems, Palo Alto, CA). The 3%/3mm and 2%/2mm local distance to agreement (DTA) were recorded during clinical operations using a commercial 2D diode array (MapCHECK 2, Sun Nuclear, Melbourne, FL). Each plan was characterized by 37 metrics that describe different failure modes between the calculated and measured dose. Machine-learning algorithms (MLAs) were trained to learn the relation between the plan characteristics and each passing rate. Minimization of the cross validated error, together with maximum a posteriori estimation (MAP), were used to choose the model parameters. Results: 3%/3mm local DTA can be predicted with an error smaller than 3% for 98% of the plans. For the remaining 2% of plans, the residual error was within 5%. For 2%/2mm local DTA passing rates, 96% percent of the plans were successfully predicted with an error smaller than 5%. All high-risk plans that failed the 2%/2mm local criteria were correctly identified by the algorithm. The most important metric to describe the passing rates was determined to be the MU per Gray (modulation factor). Conclusions: Logs files and independent dose calculations have been suggested as possible substitutes for measurement based IMRT QA. However, none of these methods answer the fundamental question of whether a plan can be delivered with a clinically acceptable error given the limitations of the linacs and the treatment planning system. Predicting the IMRT QA passing rates a priori closes that loop. For additional robustness, virtual IMRT QA can be combined with Linac QA and log file analysis to confirm appropriate delivery

  5. leve a moderada

    Directory of Open Access Journals (Sweden)

    Luis Felipe Zapata

    2008-01-01

    Full Text Available La Demencia Tipo Alzheimer (DTA representa un 70% del total de demencias que afectan a las personas de edad avanzada. Es una enfermedad neurodegenerativa que ocasiona un significativo deterioro cognitivo en los pacientes e implica una incapacidad progresiva para el adecuado funcionamiento en la vida diaria. Los estudios han tenido como eje el deterioro cognitivo, principalmente los procesos de memoria que son los más dramáticos. Sólo en años recientes se ha empezado a investigar el deterioro que puede causar la enfermedad a otros niveles como en el reconocimiento de las expresiones faciales emocionales. El objetivo de la presente investigación es analizar el reconocimiento de la expresión facial emocional en pacientes con DTA frente a personas sanas y determinar si se presentan alteraciones en este tipo de reconocimiento en los pacientes con dicha demencia. PACIENTES Y MÉTODOS: se conformaron dos grupos. Uno de 22 pacientes con DTA leves y moderados y otro grupo de 22 personas sin demencia. Se aplicó el MMSE para el diagnóstico del grado de severidad de la demencia y la prueba de rostros Pofa Kit de Paul Ekman para la evaluación del reconocimiento de la expresión facial emocional. RESULTADOS: se encontraron diferencias significativas en el reconocimiento global entre el grupo control y el grupo de pacientes. La única emoción que permaneció reconocida fue la de felicidad aún en estados moderados de la enfermedad. La rabia y tristeza se vieron afectadas desde los estados leves y el reconocimiento de la expresión de miedo se alteró solo en los estados moderados de la enfermedad

  6. Comparative evaluation of Map-Check and Arc-Check for dosimetric verification in patients treaties with IMRT

    International Nuclear Information System (INIS)

    Garcia, B.; Marquina, J.; Ramirez, J.; Gonzales, A.

    2014-08-01

    The dosimetric controls that are realized to the patients in the Intensity-Modulated Radiation Therapy (IMRT) and Volumetric Modulated Arc Therapy (VMAT) techniques; are indispensable since allows in real time to verify the quantity of imparted dose to the patient, these controls should be carried out every time that will begin a treatment, because these techniques impart dose dynamically modulating the dose intensity and movements of the Multi leaf Collimator (MLC), for they exist different diodes devices prepared in spiral (3-D) and planar form (2-D); that allows to estimate the dose fluence in a certain area. Treatment studies for head and neck with IMRT were compared regarding the reading average carried out by the diodes in the corresponding areas, using the criteria of the gamma index like dose difference 3% or 3m m of distance for both diode arrangements, in the IMRT case was found in Arc-Check a minor difference of 3/3 for an average of 99.37% of read diodes in a correct way contrary to the reading obtained with the Map-Check 3/3 an average of difference of 96.19%; in IMRT the difference was lower due to different factors like sensibility of the diodes reading, resolution, diodes disposition, as well as the average reading of entrance and exit of the radiation beams. Within the parameters delivered by the diodes arrangement is considered the positioning correction for both acceptance indexes like the gamma factor and the Distance-to-agreement (Dta), the existent difference of reading in factor gamma and Dta fundamentally is the way in like they compare the dose distribution; the Gamma uses dose averages of high and low gradients and Dta use only averages of areas of high gradients between the nearest points giving the distance as a result among the distribution point and the nearest point what makes stricter. (Author)

  7. Brazilian Air Force aircraft structural integrity program: An overview

    Directory of Open Access Journals (Sweden)

    Alberto W. S. Mello Junior

    2009-01-01

    Full Text Available This paper presents an overview of the activities developed by the Structural Integrity Group at the Institute of Aeronautics and Space - IAE, Brazil, as well as the status of ongoing work related to the life extension program for aircraft operated by the Brazilian Air Force BAF. The first BAF-operated airplane to undergo a DTA-based life extension was the F-5 fighter, in the mid 1990s. From 1998 to 2001, BAF worked on a life extension project for the BAF AT- 26 Xavante trainer. All analysis and tests were performed at IAE. The fatigue critical locations (FCLs were presumed based upon structural design and maintenance data and also from exchange of technical information with other users of the airplane around the world. Following that work, BAF started in 2002 the extension of the operational life of the BAF T-25 “Universal”. The T-25 is the basic training airplane used by AFA - The Brazilian Air Force Academy. This airplane was also designed under the “safe-life” concept. As the T-25 fleet approached its service life limit, the Brazilian Air Force was questioning whether it could be kept in flight safely. The answer came through an extensive Damage Tolerance Analysis (DTA program, briefly described in this paper. The current work on aircraft structural integrity is being performed for the BAF F-5 E/F that underwent an avionics and weapons system upgrade. Along with the increase in weight, new configurations and mission profiles were established. Again, a DTA program was proposed to be carried out in order to establish the reliability of the upgraded F-5 fleet. As a result of all the work described, the BAF has not reported any accident due to structural failure on aircraft submitted to Damage Tolerance Analysis.

  8. Control of the shape and size of iron oxide (α-Fe2O3 nanoparticles synthesized through the chemical precipitation method

    Directory of Open Access Journals (Sweden)

    Abdelmajid Lassoued

    Full Text Available Hematite (α-Fe2O3 nanoparticles were synthesized via a simple chemical precipitation method. The impact of varying the concentration of precursor on the crystalline phase, size and morphology of α-Fe2O3 products was explored. The characteristic of the synthesized hematite nanoparticles were evaluated by X-ray diffraction (XRD, Transmission Electron Microscopy (TEM, Scanning Electron Microscopy (SEM, Fourier Transform Infra-Red (FT-IR spectroscopy, Raman spectroscopy, Differential Thermal Analysis (DTA, Thermo Gravimetric Analysis (TGA, Ultraviolet–Visible (UV–Vis analysis and Photoluminescence (PL. XRD data revealed a rhombohedral (hexagonal structure with the space group R-3c in all samples. Uniform spherical like morphology was confirmed by TEM and SEM. The result revealed that the particle sizes were varied between 21 and 82 nm and that the increase in precursor concentration (FeCl3, 6H2O is accompanied by an increase in the particle size of 21 nm for pure α-Fe2O3 synthesized with [Fe3+] = 0.05 M at 82 nm for pure α-Fe2O3 synthesized with [Fe3+] = 0.4 M. FT-IR confirms the phase purity of the nanoparticles synthesized. The Raman spectroscopy was used not only to prove that we have synthesized pure hematite but also to identify their phonon modes. The thermal behavior of compound was studied by using TGA/DTA results: The TGA showed three mass losses, whereas DTA resulted in three endothermic peaks. Besides, the optical investigation revealed that samples have an optical gap of about 2.1 eV and that this value varies as a function of the precursor concentration. Keywords: Nanoparticles, Hematite (α-Fe2O3, Precipitation, Precursor, Size, Band gap

  9. Structural and constitutional studies of some cerium-praseodymium alloys

    International Nuclear Information System (INIS)

    Altunbas, M.; Harris, I.R.

    1980-01-01

    Room temperature X-ray diffraction studies on some powdered Ce-Pr alloys indicate that the face-centred-cubic (fcc) structure extends from 0 to 65% Pr and the double hexagonal (dhcp) structure from 66 to 100% Pr, after a heat treatment of 600 0 C for 2 h and quickly cooling to room temperature. Variations of atomic volume with composition in both ranges indicate that the volume difference between the fcc form of praseodymium and the dhcp form is similar to that observed for α(dhcp) and β(fcc) lanthanum, whereas extrapolation to 100% Ce from the dhcp range gave an atomic volume for the dhcp Ce appreciably in excess of the atomic volume of fcc γ-Ce. This volume expansion is consistent with a slight change of the effective valency of the cerium atoms in the dhcp solid solutions when compared with the γ-Ce but there is uncertainty as to the precise atomic volume of dhcp β-Ce. The DTA studies indicate a narrow liquidus/solidus separation and the electrical resistivity and DTA measurements indicate a regular change with composition in the transition temperature of the high temperature bcc phase. For the dhcp-fcc transition there is a marked variation in the width of the hysteresis loop across the Ce-Pr system which can be correlated with the degree of plastic deformation involved in the transformation. There is a marked increase in the slope of the transition temperature with composition for the Pr-rich alloys and no such transition is observed for the praseodymium samples after one heating cycle. A possible dhcp-fcc transition, however, is indicated by the DTA traces of the commercially pure praseodymium sample on cycling with temperature and this has been attributed to the influence of interstitial impurities. (author)

  10. Characteristics of pertussis outbreaks in Catalonia, Spain, 1997 to 2010.

    Science.gov (United States)

    Crespo, Inma; Broner, Sonia; Soldevila, Núria; Martínez, Ana; Godoy, Pere; Sala-Farré, Maria-Rosa; Company, Maria; Rius, Cristina; Domínguez, Angela; Group Of Catalonia, The Pertussis Working

    2015-01-01

    In Catalonia, pertussis outbreaks must be reported to the Department of Health. This study analyzed pertussis outbreaks between 1997 and 2010 in general and according to the characteristics of the index cases. The outbreak rate, hospitalization rate and incidence of associated cases and their 95%CI were calculated. Index cases were classified in two groups according to age (<15 years and ≥15 years) and the vaccine type received: whole cell vaccine (DTwP) or acellular vaccine (DTaP). During the study period, 230 outbreaks were reported. The outbreak rate was 2.43 × 10(-6) persons-year, and outbreaks ranged from 2 to 32 cases, with a median duration of 18 days. There were 771 associated cases, with an incidence rate of 0.8 × 10(-5) persons-year.   After classifying outbreaks according to the age of the index case, 126 outbreaks (1.3 × 10(-6) persons-year) had an index case aged <15 y and 87 (0.87 × 10(-6) person-year) had an index case aged ≥15 y (RR = 1.44, 95%CI 1.10-1.90; P = 0.007). Between 2003 and 2010, after the introduction of the acellular vaccine, the index case was vaccinated with DTwP vaccine in 25 outbreaks (0.43 × 10(-6) persons-year) and with DTaP vaccine in 32 outbreaks (0.55 × 10(-6) person-year) (RR = 0.78, 95%CI 0.46-1.31; P = 0.35). Of cases, 37.2% were correctly vaccinated, suggesting waning immunity of pertussis vaccine protection and endogenous circulation of pertussis. A greater number of outbreaks had an index case aged <15 y. No changes in the disease incidence, associated cases and hospitalization rate were observed after the introduction of DTaP.

  11. SU-C-BRD-03: Closing the Loop On Virtual IMRT QA

    Energy Technology Data Exchange (ETDEWEB)

    Valdes, G; Scheuermann, R; Y, H C.; Olszanski, A; Bellerive, M; Solberg, T [University of Pennsylvania, Philadelphia, PA (United States)

    2015-06-15

    Purpose: To develop an algorithm that predicts a priori IMRT QA passing rates. Methods: 416 IMRT plans from all treatment sites were planned in Eclipse version 11 and delivered using a dynamic sliding window technique on Clinac iX or TrueBeam linacs (Varian Medical Systems, Palo Alto, CA). The 3%/3mm and 2%/2mm local distance to agreement (DTA) were recorded during clinical operations using a commercial 2D diode array (MapCHECK 2, Sun Nuclear, Melbourne, FL). Each plan was characterized by 37 metrics that describe different failure modes between the calculated and measured dose. Machine-learning algorithms (MLAs) were trained to learn the relation between the plan characteristics and each passing rate. Minimization of the cross validated error, together with maximum a posteriori estimation (MAP), were used to choose the model parameters. Results: 3%/3mm local DTA can be predicted with an error smaller than 3% for 98% of the plans. For the remaining 2% of plans, the residual error was within 5%. For 2%/2mm local DTA passing rates, 96% percent of the plans were successfully predicted with an error smaller than 5%. All high-risk plans that failed the 2%/2mm local criteria were correctly identified by the algorithm. The most important metric to describe the passing rates was determined to be the MU per Gray (modulation factor). Conclusions: Logs files and independent dose calculations have been suggested as possible substitutes for measurement based IMRT QA. However, none of these methods answer the fundamental question of whether a plan can be delivered with a clinically acceptable error given the limitations of the linacs and the treatment planning system. Predicting the IMRT QA passing rates a priori closes that loop. For additional robustness, virtual IMRT QA can be combined with Linac QA and log file analysis to confirm appropriate delivery.

  12. Tropical sea snail shells: Possible exotic sources for ceramic biomaterial synthesis

    Science.gov (United States)

    Oktar, F. N.; Kiyici, I. A.; Gökçe, H.; Aǧaogulları, D.; Kayali, E. S.

    2013-12-01

    In this study, chemical and structural properties of sea snail shell based bioceramic materials (i.e. hydroxyapatite, whitlockite and other phases) are produced by using mechano-chemical (ultrasonic) conversion method. For this purpose, differential thermal and gravimetric analysis (DTA/TG), X-ray diffraction, infra-red (IR) and scanning electron microscope (SEM) studies are performed.

  13. Tropical sea snail shells: Possible exotic sources for ceramic biomaterial synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Oktar, F. N. [Bioengineering Dept., Faculty of Engineering, Marmara Univ., Istanbul, Turkey, and Medical Imaging Technics Dept., School of Health Related Professions, Marmara Univ., Istanbul, Turkey, and Nanotechnology and Biomaterials Research and Application Cen (Turkey); Kiyici, I. A. [Graduate School of Natural and Applied Sciences, Biomedical Engineering, Kocaeli University, Kocaeli (Turkey); Gökçe, H. [Metallurgical and Materials Engineering Dept., Istanbul Technical Univ., Istanbul, Turkey, and Prof. Dr. Adnan Tekin Material Sciences and Production Technologies Applied Research Center, Istanbul Technical Univ., Istanbul (Turkey); Ağaogulları, D.; Kayali, E. S. [Metallurgical and Materials Engineering Dept., Istanbul Technical Univ., Istanbul (Turkey)

    2013-12-16

    In this study, chemical and structural properties of sea snail shell based bioceramic materials (i.e. hydroxyapatite, whitlockite and other phases) are produced by using mechano-chemical (ultrasonic) conversion method. For this purpose, differential thermal and gravimetric analysis (DTA/TG), X-ray diffraction, infra-red (IR) and scanning electron microscope (SEM) studies are performed.

  14. 1179-1187suppl.doc

    Indian Academy of Sciences (India)

    2.11 Application: Dynamic adsorption 8 ... Surface area was determined using N2 adsorption at 77 K using Micromeritics ASAP 2020 surface analyzer . .... A SETSYS TGA-DTA 10 instrument was used to determine the thermal degradation and stability behaviour of BC, CTS/BC, CTS/BC/PMAA under air using Al2O3 crucible ...

  15. One-pot size and shape controlled synthesis of DMSO capped iron ...

    Indian Academy of Sciences (India)

    Size and shape of the capped iron oxide nanoparticles are well controlled by simply ... quently used to synthesize magnetic ferrites from different iron precursors ... added to the mixture resulting in a dark brown precipitate. Figure 2. (a–c). TG–DTA .... Doyle P S, Bibette J, Bancaud A and Viovy J L 2002 Science. 295 2237.

  16. Influence of aluminum hydroxide and lime on the hydration of tricalcium silicate

    NARCIS (Netherlands)

    de Jong, J.G.M.; Stein, H.N.; Stevels, J.M.

    1968-01-01

    The influence of amorphorous Al(OH)3 on the hydration of 3CaO.SiO2 in portland cement was studied with an isothermal calorimeter. The reaction mechanism was investigated qual. by x-ray diffraction, D.T.A., ir, and electron microscope methods and the course of Ca(OH)2 concn. was followed quant.

  17. Design of a large heat lift 40 K to 80 K pulse tube cryocooler for space applications

    NARCIS (Netherlands)

    Trollier, T.; Tanchon, J.; Buquet, J.; Ravex, A.; Charles, I.; Coynel, A.; Duband, L.; Ercolani, E.; Guillemet, L.; Mullié, J.; Dam, J.A.M.; Benschop, T.; Linder, M.; Miller, S.D.; Ross, Jr. R.G.

    2007-01-01

    A Large heat lift Pulse Tube Cooler (LPTC) is under development in partnership with AL/ DTA, CEA/SBT and THALES Cryogenics. The engineering model is expected to provide 2.3 W at 50 K at a 10 °C rejection temperature and 160 watts of electrical input power to the compressor. The split coaxial design

  18. Synthesis and characterization of perovskite oxides lafe 1-x cu x o 3 ...

    African Journals Online (AJOL)

    LaFe1-xCuxO3 (where x ranged from 0 to 0.4) powders are successfully synthesized by the solgel method employing metal nitrate salts as cations precursors and methanol as solvent. Thermogravimetric and differential thermal analysis (TGA/DTA) results exhibit that decomposition of the precursor to the oxide completed at ...

  19. Development of calcium phosphate based apatite from hen's eggshell

    Indian Academy of Sciences (India)

    Unknown

    2.2d TG–DTA analysis: The weight loss and thermal stability of the samples were also evaluated from the thermogravimetric analysis data. An HETZSCH-Gerate- bau GmBH thermal analyser having simultaneous thermal analyser (STA) 409 C microbalance with a heating rate of 10°C min–1 was employed. 3. Results and ...

  20. Transport properties and microstructure changes of talc characterized by emanation

    Czech Academy of Sciences Publication Activity Database

    Pérez-Maqueda, L. A.; Balek, Vladimír; Poyato, J.; Šubrt, Jan; Beneš, M.; Ramírez-Valle, V.; Buntseva, I.M.; Beckman, I. N.; Pérez-Rodríguez, J. L.

    2008-01-01

    Roč. 92, č. 1 (2008), s. 253-258 ISSN 1388-6150 R&D Projects: GA MŠk LC523 Grant - others:MST(ES) MAT 2005-04838 Institutional research plan: CEZ:AV0Z40320502 Keywords : DTA emanation thermal analysis * microstructure changes * radon diffusion Subject RIV: CA - Inorganic Chemistry Impact factor: 1.630, year: 2008

  1. Evaluation of red mud as pozzolanic material in replacement of cement for production of mortars

    International Nuclear Information System (INIS)

    Manfroi, E.P.; Cheriaf, M.; Rocha, J.C.

    2010-01-01

    Red mud is a by-product of the alkaline extraction of aluminum from the bauxite and represents a renewed environmental problem due the significant annual throughput by the plants. In the present work, the pozzolanic properties of Brazilian red mud fired at 600, 700, 800 and 900 deg C were investigated by monitoring lime consumption using DTA analysis and Brazilian standard methodology NBR 5772 (1992). Products and kinetics of hydration were determined in cement pastes produced with 5 and 15% red mud using x-ray diffraction and DTA analysis. Compressive strength and capillary absorption tests were realized on mortars constituted by 5, 10 and 15% red mud in replacement of cement. When calcined at 600 deg C, the red mud develops good pozzolanic properties, and the compressive strength of mortars produced with this waste meet values in accordance with regulatory standard. These results shown than red mud can be used, in partial replacement of cement, as new construction material to produce sustainable mortars with low environmental impact. (author)

  2. Structural and Spectroscopic Studies of Sm3+/CdS Nanocrystallites in Sol-Gel TiO2-ZrO2 Matrix

    Science.gov (United States)

    Karthika, S.; Prathibha, Vasudevan; Ann, Mary K. A.; Viji, Vidyadharan; Biju, P. R.; Unnikrishnan, N. V.

    2014-02-01

    A sol-gel method was used to prepare titania-zirconia matrices doped with Sm3+/CdS nanocrystallites. The structural properties of the matrices were characterized using transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential thermal analysis (DTA), and Fourier-transform infrared spectroscopy studies. The thermal stability of the material was determined by TGA/DTA analysis. The absorption spectrum shows the characteristic peaks of the Sm3+ ions and the absorption peak corresponding to the CdS nanocrystallites. The optical bandgap and size of the CdS nanoparticles were calculated from the absorption spectrum. From TEM, the interplanar distance ( d) was estimated to be 3.533 Å, which matches with the (1 0 0) plane of bulk CdS. The measurements yield a nanocrystallite size of around 7.8 nm. The optical absorption and emission spectra confirmed the formation of CdS nanoparticles along with samarium ions in the titania-zirconia matrices. The fluorescence intensity of the samarium ions was found to be greatly enhanced by codoping with CdS nanocrystallites.

  3. Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons

    Directory of Open Access Journals (Sweden)

    Zahra Jamili-Shirvan

    2013-12-01

    Full Text Available The nanocrystallization of Co67Fe4Cr7Si8B14 amorphous ribbons which prepared by planar flow melt spinning process (PFMS was investigated. Crystallization of the ribbons was studied by differential thermal analysis (DTA, X-ray diffraction (XRD and transmission electron microscopy (TEM. The DTA result of amorphous ribbon at heating rate of 10˚C/min showedoccurrence of phase transitions in two stages. The ribbons were isothermally annealed for 30 minutes in argon atmosphere at different temperatures between 300 and 650ºC with 25ºC steps. The magnetic properties of annealed samples were measured using a vibrating sample magnetometer (VSM. The VSM results revealed that optimum soft magnetic properties occurred at 400ºC. XRD patterns showed that the samples isothermally annealed up to 450ºC were amorphous, while TEM results at 400ºC indicated 7-8 nm mean size nanocrytallites in amorphous matrix and size of the nanocrystallites increased by increasing temperature. Also by X-ray diffraction pattern, precipitation of different phases at higher temperatures confirmed.

  4. Two-step nucleation of the g-phase in a Ti-45Al-18Nb alloy

    Energy Technology Data Exchange (ETDEWEB)

    Goyel, Sonalika [University of Florida, Gainesville; Rios, Orlando [ORNL; Kesler, Michael [University of Florida, Gainesville; Ebrahimi, Fereshteh [University of Florida, Gainesville

    2010-01-01

    Phase transformations in a high Nb TieAleNb alloy (Ti-45Al-18Nb at%) upon cooling were studied. This alloy solidifies as single b-phase, which upon cooling under equilibrium conditions, is expected to follow the b / b g / b g s / g s transformation path. The DTA analysis confirmed two transformation events as manifested by two peaks upon cooling. However, compositional and structural characterization of samples with different heat treatment schedules, including slow cooling (9 C/min), revealed that the s-phase did not form upon cooling. The two DTA peaks observed in the cooling cycle of the alloy are proven to be associated with the two-stage formation of the g-phase. Detailed microstructural evaluations showed that the g-phase nucleated in two discrete stages and exhibited two different morphologies. The absence of the s-phase is believed to be due to the lack of enough driving force at high temperatures. The aging of a fast cooled sample, yielding an equilibrated microstructure, substantiated the presence of the s-phase.

  5. Glioblastoma formation from cell population depleted of Prominin1-expressing cells.

    Directory of Open Access Journals (Sweden)

    Kenji Nishide

    2009-08-01

    Full Text Available Prominin1 (Prom1, also known as CD133 in human has been widely used as a marker for cancer stem cells (CSCs, which self-renew and are tumorigenic, in malignant tumors including glioblastoma multiforme (GBM. However, there is other evidence showing that Prom1-negative cancer cells also form tumors in vivo. Thus it remains controversial whether Prom1 is a bona fide marker for CSCs. To verify if Prom1-expressing cells are essential for tumorigenesis, we established a mouse line, whose Prom1-expressing cells can be eliminated conditionally by a Cre-inducible DTA gene on the Prom1 locus together with a tamoxifen-inducible CreER(TM, and generated glioma-initiating cells (GICs-LD by overexpressing both the SV40 Large T antigen and an oncogenic H-Ras(L61 in neural stem cells of the mouse line. We show here that the tamoxifen-treated GICs-LD (GICs-DTA form tumor-spheres in culture and transplantable GBM in vivo. Thus, our studies demonstrate that Prom1-expressing cells are dispensable for gliomagenesis in this mouse model.

  6. Lattice parameter values and phase transitions for the Cu{sub 2}Cd{sub 1-z}Mn {sub z}GeSe{sub 4} and Cu{sub 2}Cd{sub 1-z}Fe {sub z}GeSe{sub 4} alloys

    Energy Technology Data Exchange (ETDEWEB)

    Quintero, E. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Tovar, R. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Quintero, M. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela)]. E-mail: mquinter@ula.ve; Delgado, G.E. [Laboratorio de Cristalografia, Departamento de Quimica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Morocoima, M. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Caldera, D. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Ruiz, J. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida 5101 (Venezuela); Mora, A.E. [Laboratorio de Analisis Quimico y Estructural de Materiales, Departamento de Fisica, Universidad de Los Andes, Merida 5101 (Venezuela); Briceno, M. [Laboratorio de Analisis Quimico y Estructural de Materiales, Departamento de Fisica, Universidad de Los Andes, Merida 5101 (Venezuela); Fernandez, J.L. [Laboratorio de Analisis Quimico y Estructural de Materiales, Departamento de Fisica, Universidad de Los Andes, Merida 5101 (Venezuela)

    2007-04-25

    X-ray powder diffraction measurements and differential thermal analysis (DTA) were made on polycrystalline samples of the Cu{sub 2}Cd{sub 1-z}Mn {sub z}GeSe{sub 4} and Cu{sub 2}Cd{sub 1-z}Fe {sub z}GeSe{sub 4} alloy systems. The diffraction patterns were used to show the equilibrium conditions and to derive lattice parameter values. The effect of the annealing temperature and cooling rate to room temperature are discussed. For the Cu{sub 2}Cd{sub 1-z}Fe {sub z}GeSe{sub 4} system, only two single solid phase fields, the tetragonal stannite {alpha} and the wurtz-stannite {delta} structures were found to occur in the diagram. For the Cu{sub 2}Cd{sub 1-z}Mn {sub z}GeSe{sub 4} system, in addition to the tetragonal stannite {alpha} and the wurtz-stannite {delta} phases, MnSe was found to exist in the diagram. The DTA experiments showed that the cooling curves for both systems exhibited effects of undercooling.

  7. Rheological phase synthesis of nanosized α-LiFeO_2 with higher crystallinity degree for cathode material of lithium-ion batteries

    International Nuclear Information System (INIS)

    Liu, Haowen; Ji, Panyin; Han, Xiaoyan

    2016-01-01

    In this paper, rheological phase method has been successfully applied to synthesize nanosized α-LiFeO_2, a promising cathode material of lithium-ion batteries. The formation, structure and morphology of the as-prepared powder were characterized by Thermogravimetric and differential thermal analyses (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy (SEM). The particle size of the obtained α-LiFeO_2 ranged from 100 to 300 nm. It exhibited an initial discharge capacity 169 mAh g"−"1 at 0.1 C between 1.5 and 4.3 V, especially excellent cycling retention from the 10th to the 50th cycle (96.8%) between 1.5 and 4.3 V. The higher crystallinity degree might be responsible for the cyclability improvement. - Highlights: • α-LiFeO_2 with higher crystallinity degree has been synthesized. • The obtained samples were investigated by TGA/DTA, FTIR, SEM, XRD. • The prepared α-LiFeO_2 indicated excellent cycling retention.

  8. Effects of calcination temperature on phase formation and particle size of Zn{sub 2}Nb{sub 34}O{sub 87} powder synthesized by solid-state reaction

    Energy Technology Data Exchange (ETDEWEB)

    Amonpattaratkit, Penphitcha, E-mail: p.amonpattaratkit@gmail.com [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Ananta, Supon, E-mail: suponananta@yahoo.com [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand)

    2013-05-15

    The solid-state mixed oxide method via a rapid vibro-milling technique was explored for the preparation of single-phase Zn{sub 2}Nb{sub 34}O{sub 87} nanopowders. Phase formation of zinc niobate was investigated as a function of calcination temperature by using a combination of thermogravimetric/differential thermal analyzer (TG/DTA) and X-ray diffraction (XRD) techniques. Morphology, particle size and chemical composition of the powders were determined by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) technique. The obtained results clearly revealed the influences of calcination temperature on phase formation and particle size of Zn{sub 2}Nb{sub 34}O{sub 87} nanopowder. - Highlights: ► Single phase Zn{sub 2}Nb{sub 34}O{sub 87} was firstly prepared by solid-state mixed oxide method via a rapid vibro-milling technique. ► The influences of calcination temperature on phase formation and particle size were investigated. ► Zn{sub 2}Nb{sub 34}O{sub 87} powders were characterized by TG–DTA, XRD, SEM and EDX.

  9. Evaluation of red mud as pozzolanic material in replacement of cement for production of mortars; Avaliacao da lama vermelha como material pozolanico em substituicao ao cimento para producao de argamassas

    Energy Technology Data Exchange (ETDEWEB)

    Manfroi, E.P.; Cheriaf, M.; Rocha, J.C., E-mail: elizmanfroi@yahoo.com.b, E-mail: malik@valores.ufsc.b [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Civil

    2010-07-01

    Red mud is a by-product of the alkaline extraction of aluminum from the bauxite and represents a renewed environmental problem due the significant annual throughput by the plants. In the present work, the pozzolanic properties of Brazilian red mud fired at 600, 700, 800 and 900 deg C were investigated by monitoring lime consumption using DTA analysis and Brazilian standard methodology NBR 5772 (1992). Products and kinetics of hydration were determined in cement pastes produced with 5 and 15% red mud using x-ray diffraction and DTA analysis. Compressive strength and capillary absorption tests were realized on mortars constituted by 5, 10 and 15% red mud in replacement of cement. When calcined at 600 deg C, the red mud develops good pozzolanic properties, and the compressive strength of mortars produced with this waste meet values in accordance with regulatory standard. These results shown than red mud can be used, in partial replacement of cement, as new construction material to produce sustainable mortars with low environmental impact. (author)

  10. Sepiolite functionalized with N-[3-(trimethoxysilylpropyl]-ethylenediamine triacetic acid trisodium salt. Part I: Preparation and characterization

    Directory of Open Access Journals (Sweden)

    Lazarević Slavica S.

    2015-01-01

    Full Text Available Natural sepiolite from Andrici (Serbia was functionalized by covalent grafting of N-[3-(trimethoxysilylpropyl]ethylenediamine triacetic acid trisodium salt to the Si-OH sepiolite groups. The functionalized material, MSEAS, was characterized by determination of phase composition by X-ray diffraction (XRD analysis, analysis of morphological characteristics by scanning electron microscopy (SEM, using Fourier transform infrared (FTIR spectroscopy, differential thermal analyses (DTA, determination of specific surface areas and pore size distribution using B.E.T. method and point of zero charge (pHpzc determination. The crystal structure of sepiolite does not change significantly upon surface modification. FT-IR and DTA analysis confirmed that the modified sample maintained the basic structure of sepiolite and also the presence of organic groups in functionalized sepiolite sample. The point of zero charge of MSEAS in KNO3 solutions of different concentrations determination by the batch technique from was at pH 7.0 ± 0.1. [Projekat Ministarstva nauke Republike Srbije, br. III 45019, and FP7 NANOTECH FTM No. 245916

  11. Preparation and structural characterization of zwitterionic surfactant intercalated into NiZn-layered hydroxide salts

    Science.gov (United States)

    Liu, Jiexiang; Wang, Jianlong; Zhang, Xiaoguang; Fang, Binbin; Hu, Pan; Zhao, Xuyang

    2015-10-01

    Three zwitterionic surfactants, dodecyl dimethyl carboxylbetaine (DCB), dodecyl dimethyl sulfobetaine (DSB) and N-dodecyl-β-aminoprpionate (DAP), intercalated into NiZn-layered hydroxide salts (NZL-DCB, NZL-DSB and NZL-DAP) were synthesized by the coprecipitation method. The effect of surfactant content, pH, temperature and time of hydrothermal treatment on preparation was investigated and discussed. The NZL-DCB, NZL-DSB and NZL-DAP were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry analysis and differential thermal analysis (TGA/DTA). The results showed that basal spacings of NZL-DCB, NZL-DSB and NZL-DAP were around 3.45, 3.68 and 3.94 nm, respectively. DCB, DSB and DAP probably form an overlapped bilayer in the gallery. TGA/DTA data indicated that NZL-DCB, NZL-DSB and NZL-DAP displayed three loss weight stages: loss of adsorbed and structural water, dehydroxylation of matrix and decomposition of nitrate ions, decomposition and combustion of surfactants. Furthermore, chemical analysis data, BET surface area and scanning electron microscopic (SEM) were also measured and analyzed.

  12. Synthesis of polyphenylacetylene by radiation-induced polymerization in deoxycholic acid clathrate

    International Nuclear Information System (INIS)

    Cataldo, Franco; Strazzulla, Giovanni; Iglesias-Groth, Susana

    2009-01-01

    Phenylacetylene was polymerized as inclusion compound (clathrate) inside deoxycholic acid (DOCA) crystals. The polymerization was initiated by γ radiation and a total dose of 320 kGy was employed. The resulting polyphenylacetylene (PPA) was isolated by dissolution of deoxycholic acid in boiling ethanol. PPA high polymer was accompanied by a series of phenylacetylene oligomers, which were detected by liquid chromatographic analysis (HPLC). PPA was characterized by electronic absorption spectroscopy and by FT-IR spectroscopy in comparison to a reference PPA prepared by a stereospecific catalyst. The microstructure of PPA from inclusion polymerization was highly trans type, similar to that observed on PPA prepared by bulk radiolysis. No optical activity was detected by polarimetry on PPA prepared by inclusion polymerization. The host-guest complex PPA/DOCA was studied by differential thermal analysis (DTA) and by thermogravimetry (TGA). DTA provided evidences of the host-guest complex formation from the shift of the melting point of DOCA while the TGA confirmed the identity - in terms of thermal behaviour - of the PPA from inclusion polymerization with that from stereospecific polymerization

  13. Preparation and magnetic properties of multiferroic CuMnO2 nanoparticles.

    Science.gov (United States)

    Kurokawa, Akinobu; Yanoh, Tkuya; Yano, Shinya; Ichiyanagi, Yuko

    2014-03-01

    CuMnO2 nanoparticles with diameters of 64 nm were synthesized by a novel wet chemical method. An optimized two-step annealing method was developed through the analysis of thermogravimetric differential thermal analysis (TG-DTA) measurements in order to obtain single-phase CuMnO2. A sharp exothermic peak was observed in the DTA curve at approximately 500 K where structural changes of the copper oxides and manganese oxides in the precursor are expected to occur. It is believed that Cu+ ions were oxidized to Cu2+ ions and that Mn2+ ions were oxidized to Mn3+ ions in the Cu-Mn-O system. Deoxidization reactions were also found at approximately 1200 K. The optimized annealing temperature for the first step was determined to be 623 K in air. The optimized annealing temperature for the second step was 1173 K in an Ar atmosphere. Magnetization measurements suggested an antiferromagnetic spin ordering at approximately 50 K. It was expected that Mn3+ spin interactions induced magnetic phase transition affected by definite temperature.

  14. CRYSTALLIZATION KINETICS OF GLASS-CERAMICS BY DIFFERENTIAL THERMAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    A. NOZAD

    2011-06-01

    Full Text Available The crystallization behavior of fluorphlogopite, a glass-ceramic in the MgO–SiO2–Al2O3–K2O–B2O3–F system, was studied by substitution of Li2O for K2O in the glass composition. DTA, XRD and SEM were used for the study of crystallization behavior, formed phases and microstructure of the resulting glass-ceramics. Crystallization kinetics of the glass was investigated under non-isothermal conditions, using the formal theory of transformations for heterogeneous nucleation. The crystallization results were analyzed, and both the activation energy of crystallization process as well as the crystallization mechanism were characterized. Calculated kinetic parameters indicated that the appropriate crystallization mechanism was bulk crystallization for base glass and the sample with addition of Li2O. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses was in the range of 234-246 KJ/mol and in the samples with addition of Li2O was changed to the range of 317-322 KJ/mol.

  15. Corrosion mechanism and bioactivity of borate glasses analogue to Hench’s bioglass

    Directory of Open Access Journals (Sweden)

    Mona A. Ouis

    2012-09-01

    Full Text Available Bioactive borate glasses (from the system Na2O-CaO-B2O3-P2O5 and corresponding glass-ceramics as a new class of scaffold material were prepared by full replacement of SiO2 with B2O3 in Hench patented bioactive glass. The prepared samples were investigated by differential thermal analysis (DTA, Fourier transform infrared (FTIR spectroscopy and X-ray diffraction (XRD analysis. The DTA data were used to find out the proper heat treatment temperatures for preparation of the appropriate glass-ceramics with high crystallinity. The prepared crystalline glass-ceramics derivatives were examined by XRD to identify the crystalline phases that were precipitated during controlled thermal treatment. The FTIR spectroscopy was used to justify the formation of hydroxyapatite as an indication of the bioactivity potential or activity of the studied ternary borate glasses or corresponding glass-ceramics after immersion in aqueous phosphate solution. The corrosion results are interpreted on the basis of suggested recent views on the corrosion mechanism of such modified borate glasses in relation to their composition and constitution.

  16. Evolution of ferroelectric SrBi2Nb2O9 phase embedded in tellurite glass

    Science.gov (United States)

    Mohamed, E. A.

    2017-12-01

    Glasses with the composition, [(100-x)TeO2- x(SrO-Bi2O3-Nb2O5)] with x = 20, 30 and 40 (in mol %) were prepared. The X-ray diffraction (XRD) pattern and differential thermal analysis (DTA) for the as-prepared samples confirmed the amorphous and glassy characteristics, respectively. The SrBi2Nb2O9 phase in tellurite glass for HT773 sample at x = 40 mol % is formed and confirmed by the Rietveld refinement. DTA curves for all glass samples exhibit two endothermic dips while the two broad exothermic peaks at lower x reduced to one at higher x. Infrared (IR) results revealed that the glassy matrix are composed of TeO3, TeO3+1, TeO4, BiO6 and NbO6 structural units. The changes in the density (ρ), molar volume (Vm), oxygen molar volume (V0) and oxygen packing fraction (OPD) have correlated with structural changes in the glass network. The optical studies show an absorption bands below the absorption edge in the glass samples.

  17. The Effect of Size and Crumb Rubber Composition as a Filler with Compatibilizer Pp-G-Ma in Polypropylene Blends and Sir-20 Compound on Mechanical and Thermal Properties

    Directory of Open Access Journals (Sweden)

    Erna Frida

    2013-04-01

    Full Text Available Having been researched the development of thermoplastic elastomer material of polypropylene and natural rubber SIR-20 compound with Crumb Rubber as the filler. Reinforced polypropylene with size 60 mesh with 1 mm, and the composition of the Crumb rubber (30, 40, and 50 wt%. Observed mechanical properties are tensile strength, fracture elongation, Young's modulus, tear strength and impact strength. Thermal properties are analyzed by DSC and DTA/TGA. It is acquired that for the size of 60 mesh crumb rubber tensile strength, fracture elongation, Young’s modulus, tear strength and impact strength are bigger than 1mm size. The addition of 60 mesh crumb rubber increases but it decreases by adding of 50 weight%. While for crumb rubber 1 mm tensile strength, fracture elongation, tear strength and impact strength decreas. Based on analysis of DSC that the addition of crumb rubber does not make a difference boiling point significantly between samples containing crumb rubber and polypropylene Analysis TGA/DTA to an increase in enthalpy and decomposition temperature with the addition of crumb rubber used and thermal stability.

  18. Author Details

    African Journals Online (AJOL)

    One-year post-primary antibody persistence and booster immune response to a DTaP-IPV//PRP~T vaccine (Pentaxim) given at 18 - 19 months of age in South African children primed at 6, 10 and 14 weeks of age with the same vaccine. Abstract PDF · Vol 92, No 11 (2002) - Articles Dysbetalipoproteinaemia-clinical and ...

  19. The interaction between bitumen matrix and chemical components of radioactive wastes of WWER type

    International Nuclear Information System (INIS)

    Selucky, P.; Sazavsky, P.; Peka, V.; Krupka, M.

    2000-01-01

    The interaction between bitumen matrix and chemical components of WWER type radioactive wastes was studied. So called ''cold'' model bitumen products were prepared and compared with real products using macroDTA method. On the basis of obtained curves, the evaluation of bitumen product fire risks was performed with the aim to minimize risks of bituminization process. (authors)

  20. Composition dependence of electrical properties of ZnF2–MO–TeO2 ...

    Indian Academy of Sciences (India)

    Unknown

    concentrations of MO (P2O5, As2O3 and Bi2O3) were measured as a function of frequency and temperature over moderately ... affect the far infrared transmission of tellurite glasses to a less extent ... with differential thermal analysis (DTA) and infrared spectra (IR). ... density (d) of the glasses was determined to an accuracy.

  1. Written reminders increase vaccine coverage in Danish children - evaluation of a nationwide intervention using The Danish Vaccination Register, 2014 to 2015

    DEFF Research Database (Denmark)

    Suppli, Camilla Hiul; Rasmussen, Mette; Valentiner-Branth, Palle

    2017-01-01

    of the measles-mumps-rubella vaccine (MMR2) and the diphtheria-tetanus-pertussis-polio vaccine DTaP-IPV4 among the 7-year-olds, with 5.0 percentage points (95% confidence interval (CI): 4.5-5.4) and 6.4 percentage points (95% CI: 6.0-6.9), respectively. Among the 2.5 and 7-year-olds, the proportion...

  2. The temperature gradient on section of casting in process of primary crystallization of chromium cast iron

    Directory of Open Access Journals (Sweden)

    A. Studnicki

    2008-08-01

    Full Text Available The methodology of defining in article was introduced the temperature gradient in process of primary crystallization during cooling the casting from chromium cast iron on basis of measurements of thermal field in test DTA-K3. Insert also the preliminary results of investigations of influence temperature gradient on structure of studied wear resistance chromium cast iron.

  3. Thermal decomposition of double selenates of lanthanides (III), yttrium (III) and ammonium

    International Nuclear Information System (INIS)

    Crespi, M.S.

    1989-01-01

    Double selenates of lanthanides, yttrium and ammonium were prepared by treating mixtures of simple selenates with equimolar amounts and then dried in a vacuum desiccator containing anhydrous calcium chloride, protected from light. The compounds were studied using the conventional analytical methods such as infrared absorption spectra, X-ray diffraction, differential thermal analysis (DTA), and thermogravimetry (TG). (author)

  4. Study of reaction sequences for formation of solid solution: 0,48 ...

    African Journals Online (AJOL)

    ... of a low concentration of ions forming the perovskite structure PZT (Pb2+, Zr4+ et Ti4+) by other ions (Zn2+, Cr3+ et Sb+5 in our study) alters the reaction sequences training of the solid solution PZT and especially the formation of intermediate phase. Keywords: PZT / Calcination / TGA / DTA / RX / Piezoelectric Ceramics ...

  5. Statistical variability and confidence intervals for planar dose QA pass rates

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Daniel W.; Nelms, Benjamin E.; Attwood, Kristopher; Kumaraswamy, Lalith; Podgorsak, Matthew B. [Department of Physics, State University of New York at Buffalo, Buffalo, New York 14260 (United States) and Department of Radiation Medicine, Roswell Park Cancer Institute, Buffalo, New York 14263 (United States); Canis Lupus LLC, Merrimac, Wisconsin 53561 (United States); Department of Biostatistics, Roswell Park Cancer Institute, Buffalo, New York 14263 (United States); Department of Radiation Medicine, Roswell Park Cancer Institute, Buffalo, New York 14263 (United States); Department of Radiation Medicine, Roswell Park Cancer Institute, Buffalo, New York 14263 (United States); Department of Molecular and Cellular Biophysics and Biochemistry, Roswell Park Cancer Institute, Buffalo, New York 14263 (United States) and Department of Physiology and Biophysics, State University of New York at Buffalo, Buffalo, New York 14214 (United States)

    2011-11-15

    Purpose: The most common metric for comparing measured to calculated dose, such as for pretreatment quality assurance of intensity-modulated photon fields, is a pass rate (%) generated using percent difference (%Diff), distance-to-agreement (DTA), or some combination of the two (e.g., gamma evaluation). For many dosimeters, the grid of analyzed points corresponds to an array with a low areal density of point detectors. In these cases, the pass rates for any given comparison criteria are not absolute but exhibit statistical variability that is a function, in part, on the detector sampling geometry. In this work, the authors analyze the statistics of various methods commonly used to calculate pass rates and propose methods for establishing confidence intervals for pass rates obtained with low-density arrays. Methods: Dose planes were acquired for 25 prostate and 79 head and neck intensity-modulated fields via diode array and electronic portal imaging device (EPID), and matching calculated dose planes were created via a commercial treatment planning system. Pass rates for each dose plane pair (both centered to the beam central axis) were calculated with several common comparison methods: %Diff/DTA composite analysis and gamma evaluation, using absolute dose comparison with both local and global normalization. Specialized software was designed to selectively sample the measured EPID response (very high data density) down to discrete points to simulate low-density measurements. The software was used to realign the simulated detector grid at many simulated positions with respect to the beam central axis, thereby altering the low-density sampled grid. Simulations were repeated with 100 positional iterations using a 1 detector/cm{sup 2} uniform grid, a 2 detector/cm{sup 2} uniform grid, and similar random detector grids. For each simulation, %/DTA composite pass rates were calculated with various %Diff/DTA criteria and for both local and global %Diff normalization

  6. Preparation and characterization of the adducts between lanthanide methanesulfonates and thioxane oxide

    International Nuclear Information System (INIS)

    Castro e Silva, E. de.

    1983-01-01

    The preparation and characterization of the adduct between lanthanide methanesulphonates and thioxane oxide are presented. The compounds characterization by conductance measurements, X-ray powder patterns, infrared, visible and fluorescence spectra, TG, DTG and DTA curves was made. According to the X-ray patterns, three isomorphous series were obtained: a-La-Gd b-Tb-Dy and c-Ho-Lu, Y. (M.J.C.) [pt

  7. A note on the differential thermal analysis of Amazonian archeological pottery

    International Nuclear Information System (INIS)

    Enriquez, C.R.; Beltrao, M. da C. de M.C.; Danon, J.

    1979-02-01

    Sherds of archeological pottery of the mouth of the Amazon river are investigated by D.T.A.. These samples have been previously investigated by thermoluminescence (T.L.) and Moessbauer spectroscopy (M.S.). The aim of the study has been to establish possible correlations between the hydration phenomena and the observed charges in the iron oxides of the pottery. (author) [pt

  8. Absence of External Electric-Field Effects on Transformations in Steels

    Science.gov (United States)

    1991-10-01

    12 2. Approximate CCT diagram for the high nickel composition used in the present measurements ...................................... 13 3...Main features of CCT diagram for 02 tool steel ........................ 14 4. DTA and THA data for the 3569C isothermal bainite transformation with...on the continuous-cooling-transformation ( CCT ) diagram obtained by examining transfor- mations in a 3.0 weight percent (wt.%) nickel specimen at

  9. Nickel permanganate as a precursor in the synthesis of a NiMn2O4 spinel

    International Nuclear Information System (INIS)

    Schmidt, Jorge A.; Sagua, Aurora E.; Bazan, Julio C.; Prat, Maria R.; Braganza, Maria E.; Moran, Emilio

    2005-01-01

    The present study describes the preparation, characterization, and thermal decomposition of the compound Ni(MnO 4 ) 2 .xH 2 O, which was synthesized by a coprecipitation method at a low temperature. The role of this compound as a precursor in the synthesis of a Ni-Mn spinel was determined via X-ray, TG-DTA, electron diffraction, and EDAX measurements

  10. Addition compounds of lanthamide (III) and yttrium (III) hexafluorophosphates and N,N - dimethylformamide

    International Nuclear Information System (INIS)

    Braga, L.S.P.

    1983-01-01

    Addition compounds of lanthanide (III) and yttrium (III) hexafluorophosphates and N-N-Dimetylformamide are described to characterize the complexes, elemental analysis, melting ranges, molar conductance measurements, X-ray powder patters infrared and Raman spectra, TG and DTA curves, are studied. Information concerning the decomposition of the adducts through the thermogravimetric curves and the differential thermal analysis curves is obtained. (M.J.C.) [pt

  11. Layered Zinc Hydroxide Salts Intercalated with Anionic Surfactants and Adsolubilized with UV Absorbing Organic Molecules

    OpenAIRE

    Cursino,Ana C. T.; Rives,Vicente; Carlos,Luís D.; Rocha,João; Wypych,Fernando

    2015-01-01

    Two anionic surfactants, dodecylsulfate (DDS) and dodecylbenzenesulfonate (DBS), were intercalated into layered zinc hydroxide salts (LHS) using the direct alkaline co-precipitation method, and characterized by powder X-ray diffraction (PXRD), Fourier-transform infrared (FTIR) and thermogravimetric analysis/differential thermal analysis (TGA/DTA). Different UV-absorbing organic molecules, like salicylates, cinnamates and benzophenones, were adsolubilized in the LHS interlayer following two di...

  12. Rekayasa Biopolimer Jerami Padi dengan Teknik Kopolimerisasi Cangkok dan Taut Silang

    OpenAIRE

    Henny Purwaningsih; Tun Tedja Irawadi; Zainal Alim Mas’ud; Anas Miftah Fauzi

    2017-01-01

    Kopolimerisasi cangkok dan taut silang akrilamida (AAm) terhadap jerami padi dilakukan dalamsuasana hampa udara menggunakan aliran gas N2 dengan amonium persulfat (APS) sebagai inisiatordan N,N’-metilena-bis-akrilamida (MBAAm). Pencirian dilakukan dengan teknik mikroskopipemayaran elektron (SEM) untuk melihat morfologi permukaan, teknik spektroskopi FTIR untukmelihat gugus fungsi, dan teknik DTA untuk menganalisis ketahanan produk terhadap suhu. Kajiandilakukan terhadap swelling capacity prod...

  13. Rekayasa Biopolimer Jerami Padi Dengan Teknik Kopolimerisasi Cangkok Dan Taut Silang

    OpenAIRE

    Purwaningsih, Henny; Irawadi, Tun Tedja; Mas’ud, Zainal Alim; Fauzi, Anas Miftah

    2012-01-01

    Kopolimerisasi cangkok dan taut silang akrilamida (AAm) terhadap jerami padi dilakukan dalamsuasana hampa udara menggunakan aliran gas N2 dengan amonium persulfat (APS) sebagai inisiatordan N,N'-metilena-bis-akrilamida (MBAAm). Pencirian dilakukan dengan teknik mikroskopipemayaran elektron (SEM) untuk melihat morfologi permukaan, teknik spektroskopi FTIR untukmelihat gugus fungsi, dan teknik DTA untuk menganalisis ketahanan produk terhadap suhu. Kajiandilakukan terhadap swelling capacity prod...

  14. Thermogravimetric investigations on A(H2O)6BX6 complexes and the formation of ABX6 and ABO3 structures

    NARCIS (Netherlands)

    Heilbron, M.A.; Gellings, P.J.

    1976-01-01

    Thermogravimetry (TG) of A(H2O)6BX6 complexes are presented, with A = Cd2+, Co2+, Cu2+, Fe2+, Mg2+, Mn2+, Ni2+, Pb2+, Zn2+, B=Si4+, Sn4+, Ti4+, Zr4+, and X=Cl−, F−. On a selected number of complexes, differential thermal analyses (DTA) and differential scanning calorimetric measurements (DSC) have

  15. Formulation and synthesis by melting process of titanate enriched glass-ceramics and ceramics

    International Nuclear Information System (INIS)

    Advocat, T.; Fillet, C.; Lacombe, J.; Bonnetier, A.; McGlinn, P.

    1999-01-01

    The main objective of this work is to provide containment for the separated radionuclides in stable oxide phases with proven resistance to leaching and irradiation damage and in consequence to obtain a glass ceramic or a ceramic material using a vitrification process. Sphene glass ceramic, zirconolite glass ceramic and zirconolite enriched ceramic have been fabricated and characterized by XRD, SEM/EDX and DTA

  16. Vertical Bridgman growth and characterization of Cd0.95-xMnxZn0.05Te (x=0.20, 0.30) single-crystal ingots

    Energy Technology Data Exchange (ETDEWEB)

    Bolotnikov, A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Kopach, V. [Brookhaven National Lab. (BNL), Upton, NY (United States); Kopach, O. [Brookhaven National Lab. (BNL), Upton, NY (United States); Shcherbak, L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Fochuk, P. [Brookhaven National Lab. (BNL), Upton, NY (United States); Filonenko, S. [Brookhaven National Lab. (BNL), Upton, NY (United States); James, R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-08-01

    Solid-liquid phase transitions in Cd0.95-xMnxZn0.05Te alloys with x = 0.20 and 0.30 were investigated by differential thermal analysis (DTA). The heating/cooling rates were 5 and 10 K/min with a melt dwell time of 10, 30 and 60 minutes. Cd0.95-xMnxZn0.05Te (x=0.20, 0.30) single-crystal ingots were grown by the vertical Bridgman method guided using the DTA results. Te inclusions (1-20 microns), typical for CdTe and Cd(Zn)Te crystals, were observed in the ingots by infrared transmission microscopy. The measured X-ray diffraction patterns showed that all compositions are found to be in a single phase. Using current-voltage (I-V) measurements, the resistivity of the samples from each ingot was estimated to be about 105 Ohm·cm. The optical transmission analysis demonstrated that the band-gap width of the investigated ingots increased from 1.77 to 1.88 eV with the increase of the MnTe content from 20 to 30 mol. %.

  17. Effect of carbonation temperature on CO_2 adsorption capacity of CaO derived from micro/nanostructured aragonite CaCO_3

    International Nuclear Information System (INIS)

    Hlaing, Nwe Ni; Sreekantan, Srimala; Hinode, Hirofumi; Kurniawan, Winarto; Thant, Aye Aye; Othman, Radzali; Mohamed, Abdul Rahman; Salime, Chris

    2016-01-01

    Recent years, CaO-based synthetic materials have been attracted attention as potential adsorbents for CO_2 capture mainly due to their high CO_2 adsorption capacity. In this study, micro/nanostructured aragonite CaCO_3 was synthesized by a simple hydrothermal method with using polyacrylamide (PAM). The structural, morphological and thermal properties of the synthesized sample were investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and thermogravimetry analysis (TG-DTA). The XRD and FESEM results showed that the obtained sample was aragonite CaCO_3 with aggregated nanorods and microspheres composed of nanorods. A TG-DTA apparatus with Thermoplus 2 software was used to investigate the effect of carbonation temperature on the CO_2 adsorption capacity of CaO derived from aragonite CaCO_3 sample. At 300 °C, the sample reached the CO_2 adsorption capacity of 0.098 g-CO_2/g-adsorbent, whereas the sample achieved the highest capacity of 0.682 g-CO_2/g-adsorbent at 700 °C. The results showed that the carbonation temperature significantly influenced on the CO_2 adsorption capacity of the CaO derived from aragonite CaCO_3.

  18. Characterization of Iron and Steel Industry Slags to be Recycled under Ecological Aspects as a Recycling Concept for Waste Treatment

    International Nuclear Information System (INIS)

    Khalil, T.K.; Aly, H.F.; Bossert, J.

    1999-01-01

    The recycling and final disposal of different types of industrial waste play an important role in decreasing environmental pollution all over the world. Three different solid waste slags from steel industries situated in the Helwan area (Cairo-Egypt), namely blast furnace slags, oxygen converter slags arc furnace slags were studied. The morphology of the collected slag powders was examined using scanning electron microscopy (SEM). Surface characteristics of the slag powders were measured through nitrogen gas adsorption and application of the BET equation at 77 K. The thermal behaviour of the slag powders was studied with the help of differential thermal analysis (DTA) and thermogravimetry(TG)> Due to the presence of some changes in the DTA base lines, possibly as a result of phase transformations, X-ray diffraction was applied to identify these phases. The sintering behaviour of the compact slag powders after isostatic pressing was evaluated using dilatometry. The sintering and melting temperature of the studied samples were determined using heating microscopy. The effect of changing sintering temperature and of applying different isostatic pressures on the density and porosity of the slag powder compacts was investigated

  19. Crystallization kinetics and growth mechanism of 8 mol% yttria-stabilized zirconia (8YSZ) nano-powders prepared by a sol-gel process

    International Nuclear Information System (INIS)

    Kuo, C.-W.; Lee, Y.-H.; Hung, I-M.; Wang, M.-C.; Wen, S.-B.; Fung, K.-Z.; Shih, C.-J.

    2008-01-01

    Eight mol% yttria-stabilized zirconia (8YSZ) gel powders were synthesized at 348 K for 2 h using ZrOCl 2 .8H 2 O and Y(NO 3 ) 3 .6H 2 O as starting materials in an ethanol-water solution by a sol-gel process. The crystallization kinetics and growth mechanism of the 8YSZ gel powders have been investigated using differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The XRD results and SAED pattern show that the 8YSZ gel powders calcined at 773 K for 2 h is a cubic ZrO 2 . The activation energy for the crystallization of the cubic ZrO 2 formation in the 8YSZ gel powders is determined as 231.76 kJ/mol by a non-isothermal DTA method. Both growth morphology parameter (n) and crystallization mechanism index (m) are close to 3.0, indicating that the bulk nucleation is dominant in the cubic ZrO 2 formation. The TEM examination shows that the cubic ZrO 2 has a spherical-like morphology with a size ranging from 10 to 20 nm

  20. Pengaruh sistem vulkanisasi konvensional (CV dan semi efisien (SEV terhadap sifat aging dan termal vulkanisat campuran karet alam dan karet butil

    Directory of Open Access Journals (Sweden)

    Arum Yuniari

    2015-12-01

    Full Text Available The purpose of this research was to study the effect of CV and SEV curing systems on aging and thermal properties of natural rubber and butyl rubber blends. The mixing of rubber and rubber chemicals using two roll-mills and the vulcanization process was carried out by the hydraulic press at 160° C and 150 kg/cm2. The research design used two variations; first, the CV curing system (accelerator/sulfur (1.0/2.5 phr and SEV curing system (accelerator/sulfur (2.1/1.5 phr, second, the ratio of natural rubber/butyl: 100/0; 95/5; 90/10; 85/15; 80/20; 75/25; 70/30; 65/35; 60/40 and 55/45 phr. The parameter observed were tensile strength, elongation at break, hardness before and after aging and thermal properties, e.g.TG/DTA and DSC. The results showed that CV curing systems provided tensile, elongation at break properties gave higher quality and better aging properties. TG/DTA analysis of vulcanizates processed with CV curing systems provided slightly better thermal stability than of the SEV curing system.

  1. Thermal decomposition process of silver behenate

    International Nuclear Information System (INIS)

    Liu Xianhao; Lu Shuxia; Zhang Jingchang; Cao Weiliang

    2006-01-01

    The thermal decomposition processes of silver behenate have been studied by infrared spectroscopy (IR), X-ray diffraction (XRD), combined thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS), transmission electron microscopy (TEM) and UV-vis spectroscopy. The TG-DTA and the higher temperature IR and XRD measurements indicated that complicated structural changes took place while heating silver behenate, but there were two distinct thermal transitions. During the first transition at 138 deg. C, the alkyl chains of silver behenate were transformed from an ordered into a disordered state. During the second transition at about 231 deg. C, a structural change took place for silver behenate, which was the decomposition of silver behenate. The major products of the thermal decomposition of silver behenate were metallic silver and behenic acid. Upon heating up to 500 deg. C, the final product of the thermal decomposition was metallic silver. The combined TG-MS analysis showed that the gas products of the thermal decomposition of silver behenate were carbon dioxide, water, hydrogen, acetylene and some small molecule alkenes. TEM and UV-vis spectroscopy were used to investigate the process of the formation and growth of metallic silver nanoparticles

  2. Multi-methodological characterisation of Costa Rican biochars from small-scale retort and top-lit updraft stoves and inter-methodological comparison

    Directory of Open Access Journals (Sweden)

    Joeri Kaal

    2017-01-01

    Full Text Available We applied common (pH, elemental analysis, thermogravimetry and less-common (infrared spectroscopy, GACS adsorption test, pyrolysis-GC-MS, hydrogen pyrolysis analytical procedures to a set of biochars from Costa Rica (bamboo stalk, cacao chaff, sawmill scrap, coconut husk and orchard prunings feedstocks. The biochars were produced by high temperature combustion in a top-lit updraft stove (TLUD and low temperature anaerobic charring in a retort (RET, the latter of which was heated by the gas that evolved from the TLUD. The RET biochars exhibit a smaller adsorption capacity, higher molecular diversity and larger proportion of thermolabile materials, because of the lower degree of thermochemical alteration (DTA and therefore limited formation of the microporous polycondensed aromatic matrix typical of the TLUD biochars. Multivariate statistics showed that DTA, not feedstock composition, controls biochar organic chemistry. The TLUD biochars might be better candidates for soil amendment because of their adsorption capacities and will probably exert a more prolonged effect because of their chemical stability. The cross-comparison of the methods showed the complementarity of especially elemental analysis, GACS, thermogravimetry, hypy and pyrolysis-GC-MS.

  3. Ferroelectricity of strained SrTiO3 in lithium tetraborate glass-nanocomposite and glass-ceramic

    Science.gov (United States)

    Abdel-Khalek, E. K.; Mohamed, E. A.; Kashif, I.

    2018-02-01

    Glass-nanocomposite (GNCs) sample of the composition [90Li2B4O7-10SrTiO3] (mol %) was prepared by conventional melt quenching technique. The glassy phase and the amorphous nature of the GNCs sample were identified by Differential thermal analysis (DTA) and X-ray diffraction (XRD) studies, respectively. DTA of the GNCs exhibits sharp and broad exothermic peaks which represent the crystallization of Li2B4O7 and SrTiO3, respectively. The tetragonal Li2B4O7 and tetragonal SrTiO3 crystalline phases in glass-ceramic (GC) were identified by XRD and scanning electron microscopic (SEM). The strain tetragonal SrTiO3 phase in GNCs and GC has been confirmed by SEM. The values of crystallization activation energies (Ec1 and Ec2) for the first and second exothermic peaks are equal to 174 and 1452 kJ/mol, respectively. The Ti3+ ions in tetragonal distorted octahedral sites in GNCs were identified by optical transmission spectrum. GNCs and GC samples exhibit broad dielectric anomalies at 303 and 319 K because of strained SrTiO3 ferroelectric, respectively.

  4. The effect of UV exposure and heat treatment on crystallization behavior of photosensitive glasses

    Science.gov (United States)

    Kıbrıslı, Orhan; Ersundu, Ali Erçin

    2018-05-01

    In this study, photosensitive glasses in the Na2O-ZnO-Al2O3-SiO2 system with photosensitizing agents (cerium, silver, tin, antimony) and halogenides (NaF and KBr) were synthesized through a conventional melt-quenching technique. The crystallization mechanism was investigated for solely heat-treated and UV-exposed + heat-treated samples using differential thermal analysis (DTA), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) techniques to understand the effect of UV exposure on crystallization behavior of photosensitive glasses. Accordingly, non-isothermal DTA measurements were performed at different heating rates to determine crystallization peak, T p, and onset, T c, temperatures. For solely heat-treated samples, the kinetic parameters such as the Avrami constant, n, and morphology index, m, were calculated as 1 from the Ozawa method indicating surface crystallization and the value of crystallization activation energy was calculated as 944 kJ/mol using modified Kissinger method. On the contrary, bulk crystallization was found to be predominant for UV exposed + heat-treated samples revealing that UV exposure is the primary cause of bulk crystallization in photosensitive glasses.

  5. Model Analytical Development for Physical, Chemical, and Biological Characterization of Momordica charantia Vegetable Drug

    Science.gov (United States)

    Guimarães, Geovani Pereira; Santos, Ravely Lucena; Júnior, Fernando José de Lima Ramos; da Silva, Karla Monik Alves; de Souza, Fabio Santos

    2016-01-01

    Momordica charantia is a species cultivated throughout the world and widely used in folk medicine, and its medicinal benefits are well documented, especially its pharmacological properties, including antimicrobial activities. Analytical methods have been used to aid in the characterization of compounds derived from plant drug extracts and their products. This paper developed a methodological model to evaluate the integrity of the vegetable drug M. charantia in different particle sizes, using different analytical methods. M. charantia was collected in the semiarid region of Paraíba, Brazil. The herbal medicine raw material derived from the leaves and fruits in different particle sizes was analyzed using thermoanalytical techniques as thermogravimetry (TG) and differential thermal analysis (DTA), pyrolysis coupled to gas chromatography/mass spectrometry (PYR-GC/MS), and nuclear magnetic resonance (1H NMR), in addition to the determination of antimicrobial activity. The different particle surface area among the samples was differentiated by the techniques. DTA and TG were used for assessing thermal and kinetic parameters and PYR-GC/MS was used for degradation products chromatographic identification through the pyrograms. The infusions obtained from the fruit and leaves of Momordica charantia presented antimicrobial activity. PMID:27579215

  6. [Safety and immunogenicity of a 7-valent pneumococcal conjugate vaccine (Prevenar) booster dose in healthy Chinese toddlers].

    Science.gov (United States)

    Li, Rong-cheng; Li, Feng-xiang; Li, Yan-ping

    2009-06-01

    To evaluate the safety and immunogenicity of the booster dose of 7 valent pneumococcal conjugate vaccine (PCV7) to the healthy Chinese toddlers who had received 3 primary doses. Four hundred and eighty-eight Chinese toddlers received a booster dose of PCV7 at age of 12-15 months following a primary series of the vaccine given at ages 3, 4, 5 months separately with Diphtheria Tetanus Acellular Pertussis Combined Vaccine (DTaP) in Group 1 or concurrently with DTaP in Group 2. Following the booster dose immunization, each subject was followed up for 30 days to observe the safety of the vaccine. Blood samples were taken from a subset of subjects prior and post 30 days the booster dose immunization to evaluate immunogenicity. A high proportion of subjects in Group 1 (89%) and Group 2 (91%) remained afebrile after the booster dose. Local reactions to the PCV7 booster dose were generally mild. For each serotype, the rise in GMC (post-/pre-vaccination) showed a statistically significant difference (P<0.0001) between both groups. PCV7 administered as a booster dose is generally safe, well tolerate, and immunogenic in healthy Chinese toddlers.

  7. Interaction of titanium and zirconium hydroxides with aqueous solutions of lead(2) salts

    International Nuclear Information System (INIS)

    Savenko, V.G.; Sakharov, V.V.; Nurgalieva, A.A.; Petrov, K.I.

    1980-01-01

    The mixed phases, characterized by the Pb : Zr 4 ratio are synthesized during the process of geterophase interaction of zirconium hydroxide with solutions of lead nitrate and acetate. The process of the mixed phases thermolysis on the base of amorphous zirconium hydroxides is investigated by the methods of DTA, X-ray phase analysis and IR spectroscopy. The metastable phases are formed during the thermolysis process

  8. Synthesis and characterization of U(VI) and Th(IV) complexes with o-vanillin-p-phenylenediamine

    International Nuclear Information System (INIS)

    Bi Caifeng; Fan Yuhua

    2001-01-01

    Two new solid complexes of uranyl nitrate and thorium nitrate with bis-Schiff base o-vanillin-p-phenylenediamine (L) have been synthesized and characterized by elemental analysis, IR, UV, DTA-TG and molar conductance. The compositions of the complexes are confirmed to be [UO 2 LNO 3 ]NO 3 and [ThL(NO 3 ) 2 ](NO 3 ) 2 . Some properties of the complexes are studied

  9. Kinetics and mechanism of synthetic CoS oxidation process

    Directory of Open Access Journals (Sweden)

    Štrbac N.

    2006-01-01

    Full Text Available The results of investigation of kinetics and mechanism for synthetic a-CoS oxidation process are presented in this paper. Based on experimental data obtained using DTA and XRD analysis and constructed PSD diagrams for Co-S-O system, mechanism of synthetic a-CoS oxidation process is suggested. Characteristic kinetic parameters were obtained for experimental isothermal investigations of desulfurization degree using Sharp method.

  10. X-ray characteristics and thermal transformations of double diphosphates MLnP2O7 (M-K, Rb, Cs; Ln-REE of yttrium subgroup)

    International Nuclear Information System (INIS)

    Anisimova, N.Yu.; Chudinova, N.N.; Trunov, V.K.; AN SSSR, Moscow

    1993-01-01

    Results on studying double diphosphates of rare earth metals with K, Rb and Cs are studied by methods of X-ray analysis, high-temperature roentgenography and DTA. Double diphosphates of rare earth and alkali metals are crystallized in three structural types: monoclinic, rhombic and hexagonal, whereby rhombic form by heating inversely transforms into hexagonal one. MLnP 2 O 7 thermal transformations are studied

  11. Lanthanoid and yttrium tellurates

    Energy Technology Data Exchange (ETDEWEB)

    Gonalez, C G; Guedes de Carvalho, R A [Faculdade de Engenharia, Porto (Portugal). Centro de Engenharia Quimica

    1978-05-01

    Preparation in aqueous medium of all the lanthanoid (except Ce and Pm) and yttrium tellurates is described. Chemical analyses, solubilities at 25/sup 0/C in water and thermograms of all the products prepared were determined. X-ray diffractograms and DTA and DTG curves of La, Gd and Yb tellurates were obtained and commented. Partial volatilization of lanthanoid is observed in the thermal analysis of tellurates.

  12. Trace the exploitation of Egyptian rice straw through spectral and thermal measurements

    Directory of Open Access Journals (Sweden)

    Raafat M. Issa

    2016-09-01

    Full Text Available Cellulose from rice straw obtained at low sodium hydroxide solution concentration with high quality was used to obtain different cellulose derivatives through xanthation. Cellulose was then treated with carbon disulfide in the presence of sodium hydroxide. The viscose obtained was characterized with both chemical and instrumental analyses, namely, IR spectra, TGA and DTA analysis as well as SEM (scanning electron microscopy.

  13. Lanthanum and yttrium oxysulfides activated by europium: (Ln1-x Eux)2 O2 S - Synthesis and characterization

    International Nuclear Information System (INIS)

    Luiz, J.M.

    1989-01-01

    The synthesis of lanthanum and yttrium oxysulfides activated by europium were obtained by thermal decomposition of lanthanum and yttrium oxalates doped with europium, under an argon and sulphur atmosphere. The thermal decomposition of these compounds is studied by differential thermal analysis (DTA). The characterization of these oxysulfides were made by chemical analyses, infrared spectroscopy, X-ray diffraction, scanning electron microscopy and emission spectroscopy. (M.V.M.)

  14. Development of a dielectric ceramic based on diatomite-titania. Part one: powder preparation and sintering study

    Directory of Open Access Journals (Sweden)

    Tavares Elcio Correia de Souza

    1997-01-01

    Full Text Available This work presents powder preparation and sintering experiments of a mixture diatomite-titania. X-ray diffraction, DTA, TGA as well as chemical and microstructural analyses were made. The sintering process was investigated as a function of sintering temperature and time, mass variation, linear shrinkage and activation energy. The results show that sintering of diatomite-titania could be described by a viscous flow mechanism.

  15. PZ, PT and PZT formation from metal citrates

    International Nuclear Information System (INIS)

    Bastos, C.M.R.; Zaghette, M.A.; Jafelicci Junior, M.; Varela, J.A.

    1990-01-01

    Lead zirconate, lead titanate and lead titanate-zirconate were obtained by mechanical mixing of lead, titanium and zirconium citrates in ether and by calcination. The process was analyzed by DTA, TGA, IR, pore size distribution and surface area measurements. The results indicate that the decomposition reaction and formation of PZ, PT occur simultaneaously without formation of intermediate compounds. PZT was formed from 500 0 C. (author) [pt

  16. Additional aspects of facies determination of the Souza Formation

    International Nuclear Information System (INIS)

    Vasconcelos, E.C.; Mabesoone, J.M.

    1984-01-01

    By means of geochemical analysis of total sample and trace elements, x-ray and DTA investigation of the clay fractions, and microfanes study, obtained by the facies determination of the Souza Formation, some additional aspects giving evidence of the sequence of events responsable by origin, deposition and formation of sediments of this middle unit of the Rio do Peixe group were established. (Author) [pt

  17. Metallurgical Changes in the High Temperature Fretting of Ni and Ti Alloys.

    Science.gov (United States)

    1976-10-01

    a layerstructure on the surface. DO , ~~~~~~~~~~~ 1473 porno .. OP V ~~v ss is o soi..ETE - ; •ECVAITY CLAUIF1CATIOf, Or ThiS PAGE (Nba. D.ta —a-~~S~?~~~~~~~w3 ~~~~~~ Y~*.S 4- - ~~ %..flCt

  18. BiCaSrCuO superconductors

    International Nuclear Information System (INIS)

    Polvi, V.M.; Niemi, K.J.

    1989-01-01

    BiCaSrCuO and BiPbCaSrCuO powders have been synthesized. Different research methods (SEM,EDS,XRF,SRD,DTA) have been used to characterize the bulk specimen and wires. Resistance and current density measured as a function of temperature are reported. The ceramic products contained several phases. Lead containing specimen gave the best results and the synthesis was easily reproducible

  19. El proceso de Toma de Decisiones en pacientes con Demencia tipo Alzheimer

    Directory of Open Access Journals (Sweden)

    Jose R. Alameda

    2012-04-01

    Full Text Available Tomar decisiones es algo común en nuestra vida y contribuye a la adaptación al medio en que vivimos, por ello es relevante conocer cómo es el proceso de toma de decisiones y las posibles disfunciones que puedan darse a causa de su deterioro. En el caso de los pacientes con demencia tipo Alzheimer, los problemas en la toma de decisiones parecen incluso ya en fases leves, lo que dificulta la correcta interacción con el entorno, especialmente en situaciones de incertidumbre. Este proceso ha sido analizado desde varios enfoques, siendo la hipótesis del marcador somático y la tarea de la Iowa Gambling Task (IGT uno de los más utilizados. El objetivo de este trabajo es el de analizar la toma de decisiones en pacientes con DTA frente a un grupo de sujetos control, y analizar el tipo de elecciones de ambos grupos en situaciones de incertidumbre mediante la una versión modificada de la IGT, observar si son tendentes al riesgo o no, y la relación que guarda su ejecución con el status cognitivo en cada una de las áreas evaluadas por los tests. Además de la IGT, utilizaremos como test de cribado en demencias el Miniexamen Cognoscitivo de Lobo, Test del Reloj a la Orden y Copia y Test de Fluidez Verbal de Isaacs. En nuestros resultados, los sujetos con DTA presentan una ejecución deficitaria en la IGT, tanto en el cómputo global como en su análisis por bloques, con una estrategia de elección de cartas aleatoria, por lo que podríamos considerar ciertas tendencias al riesgo, si bien su ejecución muestra cierta capacidad de aprendizaje a lo largo de los bloques. Por último, el deterioro cognitivo y el grado de afectación en las distintas áreas analizadas se relacionan con la forma en que toman decisiones los pacientes con DTA.

  20. Synthesis of Zn(BH{sub 4}){sub 2} and Gas Absorption and Release Characteristics of Zn(BH{sub 4}){sub 2}, Ni, or Ti-Added MgH{sub 2}–Based Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Young Jun; Lee, Seong Ho; Kwon, Sung Nam; Park Il Woo; Song, Myoung Youp [Chonbuk National University, Jeonju (Korea, Republic of)

    2015-07-15

    A sample [named Zn(BH{sub 4}){sub 2}(+NaCl)] was synthesized by milling ZnCl{sub 2} and NaBH{sub 4} at 400 rpm under argon gas for 2 h. And Zn(BH{sub 4}){sub 2}(+NaCl)+MgH{sub 2} sample was prepared by milling MgH{sub 2} in a planetary ball mill and mixing with the Zn(BH{sub 4}){sub 2}(+NaCl) synthesized by milling for 4 h in a mortar with a pestle. Then the gas-release characteristics of the two samples were investrigated. Analyses of XRD patterns and FT-IR spectra, as well as TGA, DTA, and SEM observations, were also performed. After heating the samples to 400 ℃, the weight losses of Zn(BH{sub 4}){sub 2}(+NaCl) and Zn(BH{sub 4}){sub 2}(+NaCl)+MgH{sub 2} were 11.2 and 8.2 wt%, respectively, with respect to the sample weight. The DTA results for the two samples showed a decomposition peak for Zn(BH{sub 4}){sub 2} at about 61 ℃. The DTA result of Zn(BH{sub 4}){sub 2}(+NaCl) + MgH{sub 2} showed a decomposition peak for MgH{sub 2} at about 374 ℃. A sample of Zn(BH{sub 4}){sub 2}(+NaCl)+MgH{sub 2} to which Ni, and Ti were added, with a composition of 90 wt% MgH{sub 2}-5 wt% Zn(BH{sub 4}){sub 2}(+NaCl)-2.5 wt% Ni-2.5 wt% Ti, in which a large amount of MgH2 is contained in order to make a large quantity of hydrogen be absorbed and released reversibly, was also prepared. The experimental results showed that addition of Zn(BH{sub 4}){sub 2}(+NaCl), Ni, or Ti increased the dehydriding rate of MgH{sub 2}, while decreased its initial hydriding rate.

  1. THE INCORPORATION OF DOUBLE TAXATION AGREEMENTS INTO SOUTH AFRICAN DOMESTIC LAW

    Directory of Open Access Journals (Sweden)

    Izelle du Plessis

    2015-11-01

    Full Text Available There are different opinions as to the process whereby double taxation agreements (DTAs are incorporated into South African law. This contribution aims to discuss some of the existing opinions and to offer a further perspective on the matter. At the heart of the debate lies the interpretation of two provisions, namely section 231 of the Constitution of the Republic of South Africa and section 108 of the Income Tax Act and the interaction between the two. This contribution argues that South Africa's DTAs are not self-executing (a term referred to in section 231(4 of the Constitution and should therefore be enacted into law by national legislation. It is furthermore argued that section 108(2 of the Income Tax Act enables a DTA to be incorporated into South African domestic law, by means of publication in the Government Gazette. An analysis of the case law supports this argument. Whether or not DTAs are regarded as self-executing, the status of a DTA in relation to the Income Tax Act still has to be determined. In other words, once the DTA forms part of South African domestic law, does it rank higher, lower or on a par with the Income Tax Act? It is submitted that the status of DTAs in South Africa is determined by the Constitution. It is furthermore submitted that South Africa's DTAs do not attain a status on the same level as the Constitution and that the Constitution allows for the possibility that South Africa's DTAs may be overridden by subsequent legislation (for example, by amendments to the Income Tax Act. Whether or not an override will take place in a specific case should, it is submitted, be determined by the application of the principles of statutory interpretation which apply in the case of conflict. Although this latter submission finds support in the minority judgement in Glenister, both the AM Moolla and Tradehold decisions express contrary views. The hope is expressed that the South African courts will provide clarity on this

  2. SU-E-T-356: Accuracy of Eclipse Electron Macro Monte Carlo Dose Algorithm for Use in Bolus Electron Conformal Therapy

    International Nuclear Information System (INIS)

    Carver, R; Popple, R; Benhabib, S; Antolak, J; Sprunger, C; Hogstrom, K

    2014-01-01

    Purpose: To evaluate the accuracy of electron dose distribution calculated by the Varian Eclipse electron Monte Carlo (eMC) algorithm for use with recent commercially available bolus electron conformal therapy (ECT). Methods: eMC-calculated electron dose distributions for bolus ECT have been compared to those previously measured for cylindrical phantoms (retromolar trigone and nose), whose axial cross sections were based on the mid-PTV CT anatomy for each site. The phantoms consisted of SR4 muscle substitute, SR4 bone substitute, and air. The bolus ECT treatment plans were imported into the Eclipse treatment planning system and calculated using the maximum allowable histories (2×10 9 ), resulting in a statistical error of <0.2%. Smoothing was not used for these calculations. Differences between eMC-calculated and measured dose distributions were evaluated in terms of absolute dose difference as well as distance to agreement (DTA). Results: Results from the eMC for the retromolar trigone phantom showed 89% (41/46) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of −0.12% with a standard deviation of 2.56%. Results for the nose phantom showed 95% (54/57) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of 1.12% with a standard deviation of 3.03%. Dose calculation times for the retromolar trigone and nose treatment plans were 15 min and 22 min, respectively, using 16 processors (Intel Xeon E5-2690, 2.9 GHz) on a Varian Eclipse framework agent server (FAS). Results of this study were consistent with those previously reported for accuracy of the eMC electron dose algorithm and for the .decimal, Inc. pencil beam redefinition algorithm used to plan the bolus. Conclusion: These results show that the accuracy of the Eclipse eMC algorithm is suitable for clinical implementation of bolus ECT

  3. Structure and crystallization behavior of La{sub 2}O{sub 3}⋅3B{sub 2}O{sub 3} metaborate glasses doped with Nd{sup 3+} or Eu{sup 3+} ions

    Energy Technology Data Exchange (ETDEWEB)

    Pytalev, D.S., E-mail: pytalev@isan.troitsk.ru [Institute of Spectroscopy, Russian Academy of Sciences, 5 Fizicheskaya St., 142190 Troitsk, Moscow (Russian Federation); Caurant, D.; Majérus, O.; Trégouët, H. [Institut de Recherche de Chimie Paris, CNRS – Chimie ParisTech, 11 Rue Pierre et Marie Curie, 75005 Paris (France); Charpentier, T. [CEA, IRAMIS, NIMBE, CEA-CNRS UMR 3299, Laboratoire de Structure et Dynamique par Résonance Magnétique, 91191 Gif-sur-Yvette (France); Mavrin, B.N. [Institute of Spectroscopy, Russian Academy of Sciences, 5 Fizicheskaya St., 142190 Troitsk, Moscow (Russian Federation)

    2015-08-25

    Highlights: • The structure and crystallization behavior of the La{sub 2}O{sub 3}⋅3B{sub 2}O{sub 3} glass are studied. • LaB{sub 3}O{sub 6} crystallizes congruently without intermediate but only from glass surface. • The structure of the amorphous and the crystalline phases differ significantly. • The activation energy of LaB{sub 3}O{sub 6} crystal growth is determined. - Abstract: The local structure and crystallization behavior of the stoichiometric La{sub 2}O{sub 3}⋅3B{sub 2}O{sub 3} (LaMB) metaborate glass doped with Nd{sup 3+} or Eu{sup 3+} ions are studied using differential thermal analysis (DTA), X-ray diffraction (XRD), Raman scattering and {sup 11}B magic-angle spinning nuclear magnetic resonance (MAS NMR), optical absorbance and luminescence techniques. In the crystallized samples, XRD, NMR and Raman spectroscopy have detected the formation of only one crystalline phase (congruent crystallization of LaB{sub 3}O{sub 6}). No intermediate metastable crystalline phase has been detected before LaB{sub 3}O{sub 6} crystals formation (single stage crystallization process). The observation of heat treated glass samples by scanning electron microscopy (SEM) and optical microscopy coupled with the study of the effect of varying the glass particle size on the DTA curves have both revealed that LaB{sub 3}O{sub 6} crystallization only occurs by a heterogeneous nucleation mechanism (needle-shape crystals) from glass surface. The activation energy E{sub c} of crystal growth has been determined by performing DTA experiments at different heating rates with the Kissinger (784 kJ/mol) and Ozawa (801 kJ/mol) equations than can be used for surface crystallization processes. The heterogeneous crystallization behavior and the spectroscopic results obtained in this work by comparing the LaMB glass with the LaB{sub 3}O{sub 6} crystalline phase suggest the existence of significant structural differences between the amorphous and the crystalline phases contrary to what

  4. Immunogenicity and safety of a fully liquid aluminum phosphate adjuvanted Haemophilus influenzae type b PRP-CRM197-conjugate vaccine in healthy Japanese children: A phase III, randomized, observer-blind, multicenter, parallel-group study.

    Science.gov (United States)

    Togashi, Takehiro; Mitsuya, Nodoka; Kogawara, Osamu; Sumino, Shuji; Takanami, Yohei; Sugizaki, Kayoko

    2016-08-31

    Broad use of monovalent Haemophilus influenzae type b (Hib) conjugate vaccines based on the capsular polysaccharide polyribosyl-ribitol phosphate (PRP), has significantly reduced invasive Hib disease burden in children worldwide, particularly in children aged vaccine has been widely used since the initiation of public funding programs followed by a routine vaccination designation in 2013. We compared the immunogenicity and safety of PRP conjugated to a non-toxic diphtheria toxin mutant (PRP-CRM197) vaccine with the PRP-T vaccine when administered subcutaneously to healthy Japanese children in a phase III study. Additionally, we evaluated the immunogenicity and safety profiles of a diphtheria-tetanus acellular pertussis (DTaP) combination vaccine when concomitantly administered with either PRP-CRM197 or PRP-T vaccines. The primary endpoint was the "long-term seroprotection rate", defined as the group proportion with anti-PRP antibody titers ⩾1.0μg/mL, after the primary series. Long-term seroprotection rates were 99.3% in the PRP-CRM197 group and 95.6% in the PRP-T group. The intergroup difference (PRP-CRM197 group - PRP-T group) was 3.7% (95% confidence interval: 0.099-7.336), demonstrating that PRP-CRM197 vaccine was non-inferior to PRP-T vaccine (pvaccination was higher in the PRP-CRM197 group than in PRP-T. Concomitant administration of PRP-CRM197 vaccine with DTaP vaccine showed no differences in terms of immunogenicity compared with concomitant vaccination with PRP-T vaccine and DTaP vaccine. Although CRM197 vaccine had higher local reactogenicity, overall, both Hib vaccines had acceptable safety and tolerability profiles. The immunogenicity of PRP-CRM197 vaccine administered subcutaneously as a three-dose primary series in children followed by a booster vaccination 1year after the primary series induced protective levels of Hib antibodies with no safety or tolerability concerns. Registered on ClinicalTrials.gov: NCT01379846. Copyright © 2016 The Authors

  5. Structural characterization and impedance studies of PbO nanofibers synthesized by electrospinning technique

    Energy Technology Data Exchange (ETDEWEB)

    Hari Prasad, Kamatam [Department of Physics, Pondicherry University, Puducherry, 605 014 (India); Vinoth, S. [Department of Physics, Pondicherry University, Puducherry, 605 014 (India); Centre for Nanoscience, Pondicherry University, Puducherry, 605014 (India); Jena, Paramananda [Department of Physics, Pondicherry University, Puducherry, 605 014 (India); School of Materials Science and Technology, Indian Institute of Technology(BHU), Varanasi, 221 005 (India); Venkateswarlu, M. [R & D, Amara Raja Batteries Ltd, Karakambadi, 517 520, A.P (India); Satyanarayana, N., E-mail: nallanis2011@gmail.com [Department of Physics, Pondicherry University, Puducherry, 605 014 (India)

    2017-06-15

    One-dimensional electrospun lead oxide nanofibers synthesized by a simple electrospinning technique. The prepared lead oxide nanofibers investigated by using TG/DTA, FTIR, Raman, X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area analyzer, scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM-EDX), atomic force microscopy (AFM), Transmission electron microscopy (TEM), and impedance spectroscopy techniques. TG/DTA results confirmed the thermal behavior of the as-spun nanofibers. XRD, FTIR, and Raman spectra results, respectively, confirm the formation of pure orthorhombic crystalline phase and structural coordination of the lead oxide (β-PbO) nanofibers. The BET specific surface area of β-PbO nanofibers sample is found to be 51.23 m{sup 2} g{sup -1}. SEM and AFM micrographs showed the formation of β-PbO nanofibers with a diameter of 85–300 nm. The impedance measurements of lead oxide nanofibers as a function of temperature, 25–150 °C, was evaluated by analyzing the measured impedance data using the winfit software. The electrical conductivity of the lead oxide (β-PbO) nanofibers evaluated by analyzing the measured impedance data using the winfit software is found to be 5.68 × 10{sup -6} S cm{sup -1} at 150 °C. Also, an activation energy (E{sub a}) for the migration of the charge carrier evaluated from the temperature dependence of conductivity plot is found to be 0.27 eV. The temperature dependence AC conductivity of β-PbO nanofibers was evaluated using the measured impedance data and sample dimension. The observed variation of high-frequency AC conductivity attributed to the hopping electrons between the adjacent sites. - Highlights: • First time, β-PbO nanofibers were successfully prepared by electrospinning technique. • Structural, morphological, roughness and electrical properties are studied. • TG/DTA, XRD, FTIR, Raman, SEM/AFM, TEM-EDX, and impedance measurements were made.

  6. Assessment of the pyramidal tract by diffusion tensor analysis in brain hemorrhage patients for motor function prognosis

    International Nuclear Information System (INIS)

    Kawamo, Michiaki; Abe, Takumi; Izumiyama, Hitoshi

    2008-01-01

    In patients with brain hemorrhage, the entire visualized pyramidal tract was established as an area of interest (ROI). Its Fractional Anisotropy (FA) value was determined by diffusion tensor analysis (DTA), and its relationship to motor function at the onset and three months later was investigated. In 30 patients with brain hemorrhage accompanying paralysis, MRI was performed during the subacute phase (6-14 days after onset). In addition, using a workstation, DTA was performed in order to visualize the pyramidal tract. The FA of the ROI was measured on the affected and unaffected sides, and as previously reported, the ratio of FA in the affected and unaffected sides was calculated. Subsequently, we examined the relationship between the FA ratio and motor function prognosis. Motor function prognosis was assessed based on the sum of the Brunnstrom stage at the onset and three months later. A strong correlation coefficient existed between the FA ratio of the entire pyramidal tract and the sum of the Brunnstrom stage three months after onset (0.74, p<0.001), and prognosis of motor function tended to improve in patients with FA ratios of 0.95 or higher. Patients with mild paralysis were identified in order to ascertain the degree of improvement in paralysis, and a significant correlation between the FA ratio of the entire pyramidal tract and the degree of improvement in the Brunnstrom stage was observed (correlation coefficient 0.77, p<0.001). When compared to putamen hemorrhage, the FA ratio affected the prognosis of paralysis more in thalamic hemorrhage. The results suggest that in patients with an FA ratio of 1.0, the recovery rate of paralysis three months after onset is markedly high. In brain hemorrhage patients, a reduction in the FA ratio of the entire pyramidal tract was correlated with the functional prognosis of motor paralysis, and in thalamic hemorrhage, it may be possible to predict motor function based on FA ratios. Hence, the DTA of the pyramidal tract

  7. SU-E-T-356: Accuracy of Eclipse Electron Macro Monte Carlo Dose Algorithm for Use in Bolus Electron Conformal Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Carver, R [Mary Bird Perkins Cancer Center, Baton Rouge, LA (United States); Popple, R; Benhabib, S [UniversityAlabama Birmingham, Birmingham, AL (United Kingdom); Antolak, J [Mayo Clinic, Rochester, MN (United States); Sprunger, C [Louisiana State University, Baton Rouge, LA (United States); Hogstrom, K [Mary Bird Perkins Cancer Center, Baton Rouge, LA (United States); Louisiana State University, Baton Rouge, LA (United States)

    2014-06-01

    Purpose: To evaluate the accuracy of electron dose distribution calculated by the Varian Eclipse electron Monte Carlo (eMC) algorithm for use with recent commercially available bolus electron conformal therapy (ECT). Methods: eMC-calculated electron dose distributions for bolus ECT have been compared to those previously measured for cylindrical phantoms (retromolar trigone and nose), whose axial cross sections were based on the mid-PTV CT anatomy for each site. The phantoms consisted of SR4 muscle substitute, SR4 bone substitute, and air. The bolus ECT treatment plans were imported into the Eclipse treatment planning system and calculated using the maximum allowable histories (2×10{sup 9}), resulting in a statistical error of <0.2%. Smoothing was not used for these calculations. Differences between eMC-calculated and measured dose distributions were evaluated in terms of absolute dose difference as well as distance to agreement (DTA). Results: Results from the eMC for the retromolar trigone phantom showed 89% (41/46) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of −0.12% with a standard deviation of 2.56%. Results for the nose phantom showed 95% (54/57) of dose points within 3% dose difference or 3 mm DTA. There was an average dose difference of 1.12% with a standard deviation of 3.03%. Dose calculation times for the retromolar trigone and nose treatment plans were 15 min and 22 min, respectively, using 16 processors (Intel Xeon E5-2690, 2.9 GHz) on a Varian Eclipse framework agent server (FAS). Results of this study were consistent with those previously reported for accuracy of the eMC electron dose algorithm and for the .decimal, Inc. pencil beam redefinition algorithm used to plan the bolus. Conclusion: These results show that the accuracy of the Eclipse eMC algorithm is suitable for clinical implementation of bolus ECT.

  8. UV determination of Cu (II) from water after adsorption on a nitrosonaphthol functionalized XAD-2

    International Nuclear Information System (INIS)

    Memon, S.O.; Khuhawar, M.Y.; Shah, S.W.; Bhanger, M.I.

    2002-01-01

    A chelating resin was synthesized through the diazo coupling of nitrosonaphtol (NN) with a polystyrene divinyl benzene matrix-Amberlite XAD-2. The NN/XAD-2 was characterized by differential thermal analysis (DTA) and infrared spectroscopy. The performance of NN tailored XAD-2 demonstrated greater potential for the adsorption of copper(II) from water. The adsorption capacity, preconcentration factor, thermal stability, resin stability and IR behavior is discussed with some applications. (author)

  9. Features of melting of indium monohalides

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriev, V S; Smirniv, V A [AN SSSR, Chernogolovka. Inst. Fiziki Tverdogo Tela

    1980-12-01

    The character of InCl, InBr and InI melting is investigated by the methods of DTA, calorimetry, conductometry and chemical analysis. Partial decomposition of monohalogenides during melting according to the reactions of disproportionation is shown. The presence of disproportionation products (In/sup 0/ and In/sup 3 +/) is manifested in the properties of solid monohalogenides, prepared by the crystallization from melt, in their photosensitivity and electroconductivity.

  10. Examination of Some Commercial Sorptive Organobentonites

    OpenAIRE

    ÖNAL, Müşerref

    2014-01-01

    For controlling organophilic partition nanophase (OPN) formation in some commercial sorptive organobentonites (OBs), 4 sample were selected randomly and examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential thermal analysis (DTA), thermal gravimetric analysis (TGA), element analysis (EA), and nitrogen adsorption/desorption (N2-AD) techniques. Since the d(001) values of the OB samples are between 1.94 and 3.36 nm, the pseudotrilayer or paraff...

  11. Effect of Long Term Low-Level Gamma Radiation on Thermal Sensitivity of RDX/HMX Mixtures

    Science.gov (United States)

    1976-11-01

    1.1x10 R. It was concluded that the slight exothermic reaction before the 3^6 HMX polymorphic transition could be caused by a radiation-induced...Radiation on Thermal Sensitivity of RDX / HMX Mixtures 5. TYPE OF REPORT 4 PERIOD COVERED Final Report 6. PERFORMING ORG. REPORT NUMBER 7...and Identity by block number) Gamma radiation Weight loss HMX Impact sensitivity test RDX Vacuum stability test DTA Infrared spectrometry TGA

  12. 15-00273_SI_NP.doc

    Indian Academy of Sciences (India)

    ... 2−4 in Toluene. 18. Figure S8. Cyclic voltammogram (complete Scan) of compounds 2−4 and Xanthone. measured in acetonitrile solution at 100mV/sec. 19 ̶ 20. Figure S9. DTA plots of compound 2‒4. 21. Figure S10. CIE coordinates of compounds 2‒4. 22. Figure S11. Photograph of compound 2‒4 in solution form. 23 ...

  13. Experimental investigation and thermochemical assessment of the system Cu-Y-O

    International Nuclear Information System (INIS)

    Zimmermann, E.; Mohammad, A.; Boudene, A.; Neuschuetz, D.

    1995-01-01

    Experimental investigations of the thermochemical properties of the phases in the system Cu-Y-O by means of DTA, EMF, TG and calorimetric measurements are reported. The results together with critically selected data from the literature are used for a complete assessment of the Gibbs energies of the ternary phases (based on the Standard Element Reference State, SER). For the binary subsystems critically assessed data from the literature are used. (orig.)

  14. MX Siting Investigation. MX System Siting Summary Report. Land Acquisition Application Package Map Sheets. Volume III.

    Science.gov (United States)

    1982-01-18

    Environmental Impact Statement DMA Defense Mapping Agency DOPAA Description of Proposed Actions and Alternatives DTA Designated Training Area DTN Designated...Transportation Network EIS Environmental Impact Statement FLPMA Federal Land Policy Management Act FNI Fugro National, Inc. FSED Full Scale Engineering...CONTRACT OR GRANT NUMBER(s) 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Cr+e wec - r Tniz. Q6 cr-% e rL!: Pktcxim Nat*’v

  15. Application of thermal analysis in nuclear waste management

    International Nuclear Information System (INIS)

    Raje, Naina; Kalekar, Bhupesh; Acharekar, Darshana; Reddy, A.V.R.

    2009-01-01

    Thermal decomposition of zirconium raffinate and ammonium nitrate has been studied using simultaneous TG - DTA - MS/FTIR measurements. Based on non-isothermal analysis, isothermal measurements have been carried out at different temperatures to fix the calcination temperature/s. Decomposition of ammonium nitrate was studied in inert, oxidizing and reducing environments and the results suggest that the decomposition mechanism is same in inert/oxidizing atmosphere but is different in reducing environment. (author)

  16. 57Fe Moessbauer effect studies of magnetic ordering in Lasub(1-x) Srsub(x)CoO3

    International Nuclear Information System (INIS)

    Bhide, V.G.; Rajoria, D.S.

    1975-01-01

    A detailed investigation of the Lasub(1-x)Srsub(x)CoO 3 system was performed for the entire range of Sr concentrations using X-ray diffraction for structural studies, DTA for phase transition analysis, Moessbauer and magnetic susceptibility studies for magnetic properties, and electrical resistivity and Seebeck coefficient studies for electron transport properties. Among other interesting results, samples with x > 0.125 were found to show ferromagnetic ordering. (A.K.)

  17. Neue Shandite und Parkerite. Darstellung und röntgenographische Charakterisierung

    OpenAIRE

    Anusca, Irina

    2009-01-01

    Das Ziel dieser Arbeit war es, neue Verbindungen mit Shandit- und Parkeritstruktur zu darstellen und mittels röntgenographischen Methoden (Pulverdiffraktometrie und Einkristallanalyse), das thermische Verhalten durch DTA / DSC - Messungen und Elektronenmikroskopische Untersuchungen (REM, EDX) zu charakterisieren. Die vorliegende Arbeit ist wie folgt im zwei Themen gegliedert: Shandite und Parkerite. Der ersten Teil dieser Arbeit befaßt sich mit metallreichen ternären Chalkogeniden M3A2X2, ...

  18. Untitled

    Indian Academy of Sciences (India)

    A, Sct /o B s. B. 17.9 at / 3. B. 18, 6 at /o. 199 at Wo. B. ----|--|--|--|--|--|--. 3OO 500 700 900 1100. Temperature °C. Figure 9. DTA plots for ribbons of compositions indicated in the figure. observed. The FeB peak was found to shift to lower temperature for BS 16 a/o as compared to that for B > 16 afo. Inal et al (1981) observed ...

  19. Effect of resinite on the combustion of New Zealand subbituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Benfell, K.E.; Beamish, B.B.; Rodgers, K.A. [University of Newcastle, Callaghan, NSW (Australia). Dept. of Geology

    1997-09-01

    This paper shows that Oligocene resin from New Zealand`s Rotowaro coalfield displays DTA and DTG traces similar to those of other fossil resins. It modifies the thermal behaviour of low rank coal raising the peak combustion temperature and lowering its rate of combustion; this behaviour may be common among liptinite macerals. The effect is not additive and unlike other coal constituents the resinite component does not deteriorate with time.

  20. Thermal analysis/mass spectrometry as a tool for studying environmental pollution by coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Matuschek, G.; Kettrup, A.A. [GSF-Forschungszentrum fuer Umwelt und Gesundheit, GmbH, Institut fuer Oekologische Chemie, Neuherberg, D-85764 Neuherberg (Germany)

    1999-07-01

    Five different German standard coals were investigated. A simultaneous thermal analyzer/mass spectrometer was used for the characterization of the coal samples and the identification of the volatiles evolved during the heating of the sample up to 1400C. The TG and DTA results were discussed for the investigations under different atmospheres. The on line recorded mass spectra were interpreted with respect to the evolution of hazardous substances

  1. Thermal analysis/mass spectrometry as a tool for studying environmental pollution by coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Matuschek, G.; Kettrup, A.A. [GSF-Forschungszentrum fuer Umwelt und Gesundheit, GmbH, Institut fuer Oekologische Chemie, Neuherberg, D-85764 Neuherberg (Germany)

    1999-07-01

    Five different German standard coals were investigated. A simultaneous thermal analyzer/mass spectrometer was used for the characterization of the coal samples and the identification of the volatiles evolved during the heating of the sample up to 1400C. The TG and DTA results were discussed for the investigations under different atmospheres. The on line recorded mass spectra were interpreted with respect to the evolution of hazardous substances.

  2. Whooping Cough Vaccine Recommendation for Babies and Young Children

    Centers for Disease Control (CDC) Podcasts

    2015-01-22

    This podcast provides information about whooping cough and the recommendation that all children receive the DTaP vaccine, according to CDC’s recommended schedule, to help protect them from this serious disease.  Created: 1/22/2015 by National Center for Immunization and Respiratory Diseases (NCIRD), Division of Bacterial Diseases (DBD), Meningitis and Vaccine Preventable Diseases Branch (MVPDB).   Date Released: 1/22/2015.

  3. Simultaneous vaccination with MMR and DTaP-IPV-Hib and rate of hospital admissions with any infections

    DEFF Research Database (Denmark)

    Sørup, Signe; Benn, Christine S; Poulsen, Anja

    2016-01-01

    , retrospective, register based cohort study of 520,859 children born in Denmark 1997-2006, who were followed from 15months to 4years of age. Incidence rate ratios (IRRs) of hospital admissions were estimated by Cox regression and adjusted for background factors including exact age. RESULTS: By 2years of age...

  4. Synthesis, spectroscopic and electrochemical performance of pasted β-nickel hydroxide electrode in alkaline electrolyte

    Science.gov (United States)

    Shruthi, B.; Bheema Raju, V.; Madhu, B. J.

    2015-01-01

    β-Nickel hydroxide (β-Ni(OH)2) was successfully synthesized using precipitation method. The structure and property of the β-Ni(OH)2 were characterized by X-ray diffraction (XRD), Fourier Transform infra-red (FT-IR), Raman spectra and thermal gravimetric-differential thermal analysis (TG-DTA). The results of the FTIR spectroscopy and TG-DTA studies indicate that the β-Ni(OH)2 contains water molecules and anions. The microstructural and composition studies have been performed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) analysis. A pasted-type electrode is prepared using β-Ni(OH)2 powder as the active material on a nickel sheet as a current collector. Cyclic voltammetry (CV) and Electrochemical impedance spectroscopy (EIS) studies were performed to evaluate the electrochemical performance of the β-Ni(OH)2 electrode in 6 M KOH electrolyte. CV curves showed a pair of strong redox peaks as a result of the Faradaic redox reactions of β-Ni(OH)2. The proton diffusion coefficient (D) for the present β-Ni(OH)2 electrode material is found to be 1.44 × 10-12 cm2 s-1. Further, electrochemical impedance studies confirmed that the β-Ni(OH)2 electrode reaction processes are diffusion controlled.

  5. Evidence-Based Toxicology.

    Science.gov (United States)

    Hoffmann, Sebastian; Hartung, Thomas; Stephens, Martin

    Evidence-based toxicology (EBT) was introduced independently by two groups in 2005, in the context of toxicological risk assessment and causation as well as based on parallels between the evaluation of test methods in toxicology and evidence-based assessment of diagnostics tests in medicine. The role model of evidence-based medicine (EBM) motivated both proposals and guided the evolution of EBT, whereas especially systematic reviews and evidence quality assessment attract considerable attention in toxicology.Regarding test assessment, in the search of solutions for various problems related to validation, such as the imperfectness of the reference standard or the challenge to comprehensively evaluate tests, the field of Diagnostic Test Assessment (DTA) was identified as a potential resource. DTA being an EBM discipline, test method assessment/validation therefore became one of the main drivers spurring the development of EBT.In the context of pathway-based toxicology, EBT approaches, given their objectivity, transparency and consistency, have been proposed to be used for carrying out a (retrospective) mechanistic validation.In summary, implementation of more evidence-based approaches may provide the tools necessary to adapt the assessment/validation of toxicological test methods and testing strategies to face the challenges of toxicology in the twenty first century.

  6. Thermal decomposition and kinetic evaluation of decanted 2,4,6-trinitrotoluene (TNT) for reutilization as composite material

    Science.gov (United States)

    Ahmed, M. F.; Hussain, A.; Malik, A. Q.

    2016-08-01

    Use of energetic materials has long been considered for only military purposes. However, it is very recent that their practical applications in wide range of commercial fields such as mining, road building, under water blasting and rocket propulsion system have been considered. About 5mg of 2,4,6-trinitrotoluene (TNT) in serviceable (Svc) as well as unserviceable (Unsvc) form were used for their thermal decomposition and kinetic parameters investigation. Thermogravimetric/ differential thermal analysis (TG/DTA), X-ray diffraction (XRD) and Scanning electron microscope (SEM) were used to characterize two types of TNT. Arrhenius kinetic parameters like activation energy (E) and enthalpy (AH) of both TNT samples were determined using TG curves with the help of Horowitz and Metzger method. Simultaneously, thermal decomposition range was evaluated from DTA curves. Distinct diffraction peaks showing crystalline nature were obtained from XRD analysis. SEM results indicated that Unsvc TNT contained a variety of defects like cracks and porosity. Similarly, it is observed that thermal as well as kinetic behavior of both TNT samples vary to a great extent. Likewise, a prominent change in the activation energies (E) of both samples is observed. This in-depth study provides a way forward in finding solutions for the safe reutilization of decanted TNT.

  7. Effect of carbonation temperature on CO{sub 2} adsorption capacity of CaO derived from micro/nanostructured aragonite CaCO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Hlaing, Nwe Ni, E-mail: nwenihlaing76@gmail.com [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Department of International Development Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo (Japan); Department of Physics, University of Yangon, 11041 Kamayut, Yangon (Myanmar); Sreekantan, Srimala, E-mail: srimala@usm.my [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Hinode, Hirofumi, E-mail: hinode@ide.titech.ac.jp; Kurniawan, Winarto, E-mail: Kurniawan.w.ab@m.titech.ac.jp [Department of International Development Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo (Japan); Thant, Aye Aye, E-mail: a2thant@gmail.com [Department of Physics, University of Yangon, 11041 Kamayut, Yangon (Myanmar); Othman, Radzali, E-mail: radzali@utem.edu.my [Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Malacca (Malaysia); Mohamed, Abdul Rahman, E-mail: chrahman@eng.usm.my [Low Carbon Economy (LCE) Research Group, School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Salime, Chris, E-mail: chris.salim@surya.ac.id [Environmental Engineering, Surya University, Tangerang, 15810 Banten (Indonesia)

    2016-07-06

    Recent years, CaO-based synthetic materials have been attracted attention as potential adsorbents for CO{sub 2} capture mainly due to their high CO{sub 2} adsorption capacity. In this study, micro/nanostructured aragonite CaCO{sub 3} was synthesized by a simple hydrothermal method with using polyacrylamide (PAM). The structural, morphological and thermal properties of the synthesized sample were investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and thermogravimetry analysis (TG-DTA). The XRD and FESEM results showed that the obtained sample was aragonite CaCO{sub 3} with aggregated nanorods and microspheres composed of nanorods. A TG-DTA apparatus with Thermoplus 2 software was used to investigate the effect of carbonation temperature on the CO{sub 2} adsorption capacity of CaO derived from aragonite CaCO{sub 3} sample. At 300 °C, the sample reached the CO{sub 2} adsorption capacity of 0.098 g-CO{sub 2}/g-adsorbent, whereas the sample achieved the highest capacity of 0.682 g-CO{sub 2}/g-adsorbent at 700 °C. The results showed that the carbonation temperature significantly influenced on the CO{sub 2} adsorption capacity of the CaO derived from aragonite CaCO{sub 3}.

  8. Influence of calcination temperature on Cd{sub 0.3}Co{sub 0.7}Fe{sub 2}O{sub 4} nanoparticles: Structural, thermal and magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, Ch.Venkata, E-mail: cvrphy@gmail.com [School of Mechanical Engineering, Yeungnam University, 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of); PrabhakarVattikuti, S.V. [School of Mechanical Engineering, Yeungnam University, 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of); Ravikumar, R.V.S.S.N. [Department of Physics, Acharya Nagarjuna University, AP 522510 (India); Moon, Sang Jun, E-mail: nanobiomems@dgist.ac.kr [Cybernetics Laboratory, Daegu Gyeongbuk Institute of Science and Technology (DGIST) (Korea, Republic of); Shim, Jaesool, E-mail: jshim@ynu.ac.kr [School of Mechanical Engineering, Yeungnam University, 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do 712-749 (Korea, Republic of)

    2015-11-15

    Cadmium substituted cobalt ferrite nanoparticles are synthesis using the chemical method. The as-prepared ferrite nanoparticles are calcinated at 300 °C and 600 °C respectively. The samples are studied using; Powder XRD, SEM with EDX, TEM, FT-IR, TG-DTA and vibrating sample magnetometer (VSM) in order to study the calcination temperature effect on structural, morphological and magnetic properties. The magnetic properties, like saturation magnetization and coercivity increases with increasing the calcination temperature. This enhancement is attributed to the transition from amulti-domain to a single-domain nature. The absorption bands observed at 588 cm{sup −1} (ν{sub 1}) and 440 cm{sup −1} (ν{sub 2}) are attributed to the vibrations of tetrahedral and octahedral complexes. The TG-DTA curves reveal the thermal stability of the prepared ferrite nanoparticles. The calcination temperature influences the magnetic properties, surface morphology and crystalline size. - Highlights: • Cd{sub 0.3}Co{sub 0.7}Fe{sub 2}O{sub 4} nanoparticles synthesized using the chemical co-precipitation. • The magnetization, coercivity values increases with increasing the calcination temperature. • The calcination temperature influences the magnetic properties and crystallite size. • The FTIR spectra results confirmed the vibrations of tetrahedral and octahedral complexes.

  9. Vaccination Coverage for Infants: Cross-Sectional Studies in Two Regions of Belgium

    Directory of Open Access Journals (Sweden)

    Emmanuelle Robert

    2014-01-01

    Full Text Available Methods and Objectives. To estimate infant vaccination coverage in the French-speaking region of Belgium (Wallonia and in the Brussels-Capital Region, two cross-sectional studies were performed in 2012. A face-to-face questionnaire was administered by trained investigators. The objective was to evaluate infant vaccination coverage retrospectively in 18- to 24-month-old children. These studies offered the opportunity to assess some factors influencing vaccine uptake in infants. Results and Discussion. Approximately 99% of the children had received the first dose of IPV-DTaP, 90% the fourth dose, 94% the MMR vaccine, 97% the first dose of pneumococcal vaccine, and 90% the third dose. In both regions, when fitting a logistic model, the most associated factor was attendance at maternal and child clinics (MCH. No association was observed between vaccination coverage and the mother’s level of education. For the last immunization session, where the mother was a Belgian native and when she worked more hours, child was better immunized, but only in Brussels. Conclusion. Coverage for the fourth dose of hexavalent vaccine (DTaP-IPV-HBV/Hib needs to be increased. Indeed, additional effort is needed to increase HIB and pertussis coverage rates because the herd immunity threshold for these two diseases has not been reached.

  10. Thermoanalytical Investigation of Terazosin Hydrochloride

    Directory of Open Access Journals (Sweden)

    Mona Mohamed Abdel-Moety

    2013-02-01

    Full Text Available Purpose: Thermal analysis (TGA, DTG and DTA and differential scanning calorimetry (DSC have been used to study the thermal behavior of terazosin hydrochloride (TER. Methods: Thermogravimetric analysis (TGA/DTG, differential thermal analysis (DTA and differential scanning calorimetry (DSC were used to determine the thermal behavior and purity of the used drug. Thermodynamic parameters such as activation energy (E*, enthalpy (H*, entropy (S* and Gibbs free energy change of the decomposition (G* were calculated using different kinetic models. Results: The purity of the used drug was determined by differential scanning calorimetry (99.97% and specialized official method (99.85% indicating to satisfactory values of the degree of purity. Thermal analysis technique gave satisfactory results to obtain quality control parameters such as melting point (273 ºC, water content (7.49% and ash content (zero in comparison to what were obtained using official method: (272 ºC, (8.0% and (0.02% for melting point, water content and ash content, respectively. Conclusion: Thermal analysis justifies its application in quality control of pharmaceutical compounds due to its simplicity, sensitivity and low operational costs. DSC data indicated that the degree of purity of terazosin hydrochloride is similar to that found by official method.

  11. Exploration of the Role of Heat Activation in Enhancing Serpentine Carbon Sequestration Reactions

    International Nuclear Information System (INIS)

    McKelvy, M.J.; Chizmeshya, A.V.G.; Diefenbacher, J.; Bearat, H.; Wolf, G.

    2005-01-01

    As compared with other candidate carbon sequestration technologies, mineral carbonation offers the unique advantage of permanent disposal via geologically stable and environmentally benign carbonates. The primary challenge is the development of an economically viable process. Enhancing feedstock carbonation reactivity is key. Heat activation dramatically enhances aqueous serpentine carbonation reactivity. Although the present process is too expensive to implement, the materials characteristics and mechanisms that enhance carbonation are of keen interest for further reducing cost. Simultaneous thermogravimetric and differential thermal analysis (TGA/DTA) of the serpentine mineral lizardite was used to isolate a series of heat-activated materials as a function of residual hydroxide content at progressively higher temperatures. Their structure and composition are evaluated via TGA/DTA, X-ray powder diffraction (including phase analysis), and infrared analysis. The meta-serpentine materials that were observed to form ranged from those with longer range ordering, consistent with diffuse stage-2 like interlamellar order, to an amorphous component that preferentially forms at higher temperatures. The aqueous carbonation reaction process was investigated for representative materials via in situ synchrotron X-ray diffraction. Magnesite was observed to form directly at 15 MPa CO 2 and at temperatures ranging from 100 to 125 C. Carbonation reactivity is generally correlated with the extent of meta-serpentine formation and structural disorder.

  12. Preparation, Characterization and application of Alumina Powder Produced by advanced Preparation Techniques

    International Nuclear Information System (INIS)

    Khalil, T.; Abou El Nour, F.; Bossert, J.; Ashor, A.H.

    2000-01-01

    Aluminum oxide powders were prepared by advanced chemical techniques. The morphology of the produced powders were examined using scanning electron microscopy (SEM). Surface characteristics of the powders were measured through nitrogen gas adsorption and application of the BET equation at 77 K, through the use of nitrogen gas adsorption at liquid nitrogen temperature and application of the Brunauer-Emett-Teller (BET) equation. The total surface area, total pore volume and pore radius of the powders were calculated through the construction of the plots relating the amount of nitrogen gas adsorbed V 1 and the thickness of the adsorbed layer t(V 1 -t plots). The thermal behaviour of the powders were studied with the help of differential thermal analysis (DTA) and thermogravimetry (TG). Due to the presence of some changes in the DTA base lines, possibly as a result of phase transformations, X-ray diffraction was applied to identify these phases. The sintering behaviour of the compact powders after isostatic pressing was evaluated using dilatometry. The sintering temperature of the studied samples were also determined using heating microscopy. The effect of changing sintering temperature and of applying different isostatic pressures on the density and porosity of the compacts was investigated

  13. Design and implementation of a film dosimetry audit tool for comparison of planned and delivered dose distributions in high dose rate (HDR) brachytherapy

    Science.gov (United States)

    Palmer, Antony L.; Lee, Chris; Ratcliffe, Ailsa J.; Bradley, David; Nisbet, Andrew

    2013-10-01

    A novel phantom is presented for ‘full system’ dosimetric audit comparing planned and delivered dose distributions in HDR gynaecological brachytherapy, using clinical treatment applicators. The brachytherapy applicator dosimetry test object consists of a near full-scatter water tank with applicator and film supports constructed of Solid Water, accommodating any typical cervix applicator. Film dosimeters are precisely held in four orthogonal planes bisecting the intrauterine tube, sampling dose distributions in the high risk clinical target volume, points A and B, bladder, rectum and sigmoid. The applicator position is fixed prior to CT scanning and through treatment planning and irradiation. The CT data is acquired with the applicator in a near clinical orientation to include applicator reconstruction in the system test. Gamma analysis is used to compare treatment planning system exported RTDose grid with measured multi-channel film dose maps. Results from two pilot audits are presented, using Ir-192 and Co-60 HDR sources, with a mean gamma passing rate of 98.6% using criteria of 3% local normalization and 3 mm distance to agreement (DTA). The mean DTA between prescribed dose and measured film dose at point A was 1.2 mm. The phantom was funded by IPEM and will be used for a UK national brachytherapy dosimetry audit.

  14. Synthesis and characterization of Cu3TaIn3Se7 and CuTa2InTe4

    International Nuclear Information System (INIS)

    Calderon, E.; Munoz-Pinto, M.; Duran-Pina, S.; Quintero, M.; Quintero, E.; Morocoima, M.; Delgado, G.E.; Romero, H.; Briceno, J.M.; Fernandez, J.; Grima-Gallardo, P.

    2008-01-01

    Polycrystalline samples of Cu 3 TaIn 3 Se 7 and CuTa 2 InTe 4 were synthesized by the usual melt and anneal technique. X-ray powder diffraction showed a single phase behavior for both samples with tetragonal symmetry and unit cell parameter values a=5.794±0.002 A, c=11.66±0.01 A, c/a=2.01, V=391±1 A 3 and a=6.193±0.001 A, c=12.400 ±0.002A, c/a=2.00, V=475±1 A 3 , respectively. Differential thermal analysis (DTA) measurements suggested a complicated behavior near the melting point with several thermal transitions observed in the heating and cooling runs. From the shape of the DTA peaks it was deduced that the melting is incongruent for both materials. Magnetic susceptibility measurements (zero-field cooling and field cooling) indicated an antiferromagnetic character with transition temperatures of T=70 K (Cu 3 TaIn 3 Se 7 ) and 42 K (CuTa 2 InTe 4 ). A spin-glass transition was observed in Cu 3 TaIn 3 Se 7 with T f ∼50 K. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. The investigation of YAlO{sub 3}-NdAlO{sub 3} system, synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Szysiak, A., E-mail: agnieszka.szysiak@itme.edu.pl [Institute of Electronic Materials Technology, Wolczynska 133, 01-919 Warsaw (Poland); Klimm, D.; Ganschow, S. [Leibniz Institute for Crystal Growth, Max-Born Str. 2, 12489 Berlin (Germany); Mirkowska, M.; Diduszko, R.; Lipinska, L. [Institute of Electronic Materials Technology, Wolczynska 133, 01-919 Warsaw (Poland); Kwasniewski, A. [Leibniz Institute for Crystal Growth, Max-Born Str. 2, 12489 Berlin (Germany); Pajaczkowska, A. [Institute of Electronic Materials Technology, Wolczynska 133, 01-919 Warsaw (Poland)

    2011-09-01

    Highlights: {center_dot} The system YAlO{sub 3}-NdAlO{sub 3} is pseudo-binary. {center_dot} Both end members show high mutual solubility >25% in the solid phase. {center_dot} A solid solution Y{sub 0.8}Nd{sub 0.2} melts azeotropic ca. 20{sup o} below pure YAP. {center_dot} All YAP-rich solid solutions have the 2-phase region between solidus and liquidus. - Abstract: The pseudo-binary phase diagram of the YAlO{sub 3} (YAP)-NdAlO{sub 3} (NAP) system was determined by differential thermal analysis (DTA) and X-ray powder diffraction (XRD) measurements. High purity nanocrystalline powders and small single crystals of Y{sub 1-x}Nd{sub x}AlO{sub 3} (0 {<=} x {<=} 1) have been produced successfully by modified sol-gel (Pechini) and micro-pulling-down methods, respectively. Both end members show high mutual solubility >25% in the solid phase, with a miscibility gap for intermediate compositions. A solid solution with x {approx} 0.2 melts azeotropic ca. 20{sup o} below pure YAP. Such crystals can be grown from the melt without segregation. The narrow solid/liquid region near the azeotrope point could be measured with a 'cycling' DTA measurement technique.

  16. Synthesis, characterizations and anti-bacterial activities of pure and Ag doped CdO nanoparticles by chemical precipitation method.

    Science.gov (United States)

    Sivakumar, S; Venkatesan, A; Soundhirarajan, P; Khatiwada, Chandra Prasad

    2015-02-05

    In the present study, synthesized pure and Ag (1%, 2%, and 3%) doped Cadmium Oxide (CdO) nanoparticles by chemical precipitation method. Then, the synthesized products were characterized by thermo gravimetric-differential thermal analysis (TG-DTA), X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, Ultra violet-Vis diffused reflectance spectroscopy (UV-Vis-DRS), Scanning electron microscopy (SEM), Energy dispersive X-rays (EDX) spectroscopy, and anti-bacterial activities, respectively. The transition temperatures and phase transitions of Cd(OH)2 to CdO at 400°C was confirmed by TG-DTA analysis. The XRD patterns show the cubic shape and average particle sizes are 21, 40, 34, and 37nm, respectively for pure and Ag doped samples. FT-IR study confirmed the presence of CdO and Ag at 677 and 459cm(-1), respectively. UV-Vis-DRS study shows the variation on direct and indirect band gaps. The surface morphologies and elemental analysis have been confirmed from SEM and with EDX. In addition, the synthesized products have been characterized by antibacterial activities against Gram-positive and negative bacteria. Further, the present investigation suggests that CdO nanoparticles have the great potential applications on various industrial and medical fields of research. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Structural study of some divalent aluminoborate glasses using ultrasonic and positron annihilation techniques

    Science.gov (United States)

    Saddeek, Yasser B.; Mohamed, Hamdy F. M.; Azooz, Moenis A.

    2004-07-01

    Positron annihilation lifetime (PAL), ultrasonic techniques, and differential thermal analysis (DTA) were performed to study the structure of some aluminoborate glasses. The basic compositions of these glasses are 50 B2O3 + 10 Al2O3 + 40 RO (wt%), where RO is the divalent oxide (MgO, CaO, SrO, and CdO). The ultrasonic data show that the rigidity increases from MgO to CaO then decrease at SrO and again increases at CdO. The glass transition temperature (determined from DTA) decreases from MgO to SrO then increases at CdO. The trend of the thermal properties was attributed to thermal stability. The experimental data are correlated with the internal glass structure and its connectivity. The PAL data show that an inversely correlation between the relative fractional of the open hole volume and the density of the samples. Also, there is a good correlation between the ortho-positronium (o-Ps) lifetime (open hole volume size) and the bulk modulus of the samples (determined from ultrasonic technique). The open volume hole size distribution for the samples shows that the open volume holes expand in size for CaO, SrO, MgO, and CdO, respectively with their distribution function moving to higher volume size.

  18. Design and implementation of a film dosimetry audit tool for comparison of planned and delivered dose distributions in high dose rate (HDR) brachytherapy

    International Nuclear Information System (INIS)

    Palmer, Antony L; Bradley, David; Nisbet, Andrew; Lee, Chris; Ratcliffe, Ailsa J

    2013-01-01

    A novel phantom is presented for ‘full system’ dosimetric audit comparing planned and delivered dose distributions in HDR gynaecological brachytherapy, using clinical treatment applicators. The brachytherapy applicator dosimetry test object consists of a near full-scatter water tank with applicator and film supports constructed of Solid Water, accommodating any typical cervix applicator. Film dosimeters are precisely held in four orthogonal planes bisecting the intrauterine tube, sampling dose distributions in the high risk clinical target volume, points A and B, bladder, rectum and sigmoid. The applicator position is fixed prior to CT scanning and through treatment planning and irradiation. The CT data is acquired with the applicator in a near clinical orientation to include applicator reconstruction in the system test. Gamma analysis is used to compare treatment planning system exported RTDose grid with measured multi-channel film dose maps. Results from two pilot audits are presented, using Ir-192 and Co-60 HDR sources, with a mean gamma passing rate of 98.6% using criteria of 3% local normalization and 3 mm distance to agreement (DTA). The mean DTA between prescribed dose and measured film dose at point A was 1.2 mm. The phantom was funded by IPEM and will be used for a UK national brachytherapy dosimetry audit. (paper)

  19. Crystallization kinetics and growth mechanism of 8 mol% yttria-stabilized zirconia (8YSZ) nano-powders prepared by a sol-gel process

    Energy Technology Data Exchange (ETDEWEB)

    Kuo, C.-W. [Department of Resources Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Lee, Y.-H. [Department of Materials Science and Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Hung, I-M. [Department of Chemical Engineering and Materials Science, Yuan Ze University, 135 Far-East Road, Chung-Li, Taoyuan, Taiwan (China); Wang, M.-C. [Faculty of Fragrance and Cosmetics, Kaohsiung Medical University, 100 Shi-Chuan 1st Road, Kaohsiung 807, Taiwan (China); Wen, S.-B. [Department of Resources Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Fung, K.-Z. [Department of Materials Science and Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Shih, C.-J. [Faculty of Fragrance and Cosmetics, Kaohsiung Medical University, 100 Shi-Chuan 1st Road, Kaohsiung 807, Taiwan (China)], E-mail: cjshih@kmu.edu.tw

    2008-04-03

    Eight mol% yttria-stabilized zirconia (8YSZ) gel powders were synthesized at 348 K for 2 h using ZrOCl{sub 2}.8H{sub 2}O and Y(NO{sub 3}){sub 3}.6H{sub 2}O as starting materials in an ethanol-water solution by a sol-gel process. The crystallization kinetics and growth mechanism of the 8YSZ gel powders have been investigated using differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The XRD results and SAED pattern show that the 8YSZ gel powders calcined at 773 K for 2 h is a cubic ZrO{sub 2}. The activation energy for the crystallization of the cubic ZrO{sub 2} formation in the 8YSZ gel powders is determined as 231.76 kJ/mol by a non-isothermal DTA method. Both growth morphology parameter (n) and crystallization mechanism index (m) are close to 3.0, indicating that the bulk nucleation is dominant in the cubic ZrO{sub 2} formation. The TEM examination shows that the cubic ZrO{sub 2} has a spherical-like morphology with a size ranging from 10 to 20 nm.

  20. Characterization of some archaeological ceramics and clay samples from Zamala - Far-northern part of Cameroon (West Central Africa)

    Energy Technology Data Exchange (ETDEWEB)

    Ntah, Z.L. Epossi; Sobott, R.; Bente, K., E-mail: zoilaepossi@yahoo.fr [Institute of Mineralogy, Crystallography and Materials Science, University of Leipzig (Germany); Fabbri, B. [Institute of Science and Technology for Ceramics, National Research Council (CNR) of Italy, Faenza (Italy)

    2017-07-15

    Seventeen ceramics samples (515±95 BP, about 580 years old) and two clay raw materials from Zamala (Far-northern, Cameroon) were characterized by X-ray diffraction (XRD), thermal analysis (DTA/TG) and X-ray fluorescence spectroscopy. The aim of the work was the deduction of the production technology and provenance of these ceramics. With the exception of one sample the analysed ceramics formed a homogeneous chemical and mineralogical group. The observed mineralogical phases were quartz, mica (biotite), potassium feldspar (microcline) and plagioclase (albite and oligoclase). The XRD study of two local clays yielded the presence of quartz, kaolinite, mica, feldspar and plagioclase. The presence of the broad endothermic peak in the DTA/TG curves of the clays and its absence in the curves of the ceramics indicated that the firing temperature of the ceramics was above 550-600 °C, which is the temperature of the kaolinite-metakaolinite transformation. The firing experiments of the clay between 400-1200 °C in oxidizing atmosphere showed that mica disappeared above 900 °C. Therefore, the firing temperature of the sherds should have been between 600-900 °C. The chemical correlation between ceramics and local clay materials pointed out to a local production of these ceramics. (author)

  1. Thermal decomposition of hydrotalcite-like compounds studied by a novel tapered element oscillating microbalance (TEOM)

    International Nuclear Information System (INIS)

    Perez-Ramirez, Javier; Abello, Sonia

    2006-01-01

    For the first time, we report on the application of a tapered element oscillating microbalance (TEOM) as a novel technique to investigate the thermal decomposition of hydrotalcite-like compounds (HTlcs) in air. Experiments were performed in the temperature range of 323-973 K with Mg-Al, Ni-Al, and Co-Al-HTlcs. The TEOM technique measures mass changes based on inertial forces, presenting important advantages over conventional thermogravimetric analyzers, such as the very rapid time response and the well-defined flow pattern. In general terms, excellent agreement between TEOM, TGA, and DTA techniques during HTlc decomposition was obtained. Interestingly, transition temperatures in the TEOM were lower than in TGA and DTA, particularly for removal of interlayer water but also for dehydroxylation of the brucite-like layers and decarbonation. This was attributed to the flow-through operation in the tapered element of the TEOM as compared to the recognized gas stagnancy and bypass in sample crucibles of conventional thermogravimetric analyzers. Our results conclude that the TEOM technique is suitable for temperature-programmed studies. However, due to its operation principle, blank runs are required in contrast to the more automatic operation in commercial thermogravimetric units. Besides, a careful sample loading and packing in the micro-reactor is essential for reproducible results

  2. Features of the incorporation of single and double based powders within emulsion explosives

    Science.gov (United States)

    Ribeiro, J. B.; Mendes, R.; Tavares, B.; Louro, C.

    2014-05-01

    In this work, features of the thermal and detonation behaviour of compositions resulting from the mixture of single and double based powders within ammonium nitrate based emulsion explosives are shown. Those features are portrayed through results of thermodynamic-equilibrium calculations of the detonation velocity, the chemical compatibility assessment through differential thermal analysis [DTA] and thermo gravimetric analysis [TGA], the experimental determination of the detonation velocity and a comparative evaluation of the shock sensitivity using a modified version of the "gap-test". DTA/TGA results for the compositions and for the individual components overlap until the beginning of the thermal decomposition which is an indication of the absence of formation of any new chemical species and so of the compatibility of the components of the compositions. After the beginning of the thermal decomposition it can be seen that the rate of mass loss is much higher for the compositions with powder than for the one with sole emulsion explosive. Both, theoretical and experimental, values of the detonation velocity have been shown to be higher for the powdered compositions than for the sole emulsion explosive. Shock sensitivity assessments have ended-up with a slightly bigger sensitivity for the compositions with double based powder when compared to the single based compositions or to the sole emulsion.

  3. Features of the incorporation of single and double based powders within emulsion explosives

    International Nuclear Information System (INIS)

    Ribeiro, J B; Mendes, R; Tavares, B; Louro, C

    2014-01-01

    In this work, features of the thermal and detonation behaviour of compositions resulting from the mixture of single and double based powders within ammonium nitrate based emulsion explosives are shown. Those features are portrayed through results of thermodynamic-equilibrium calculations of the detonation velocity, the chemical compatibility assessment through differential thermal analysis [DTA] and thermo gravimetric analysis [TGA], the experimental determination of the detonation velocity and a comparative evaluation of the shock sensitivity using a modified version of the g ap-test . DTA/TGA results for the compositions and for the individual components overlap until the beginning of the thermal decomposition which is an indication of the absence of formation of any new chemical species and so of the compatibility of the components of the compositions. After the beginning of the thermal decomposition it can be seen that the rate of mass loss is much higher for the compositions with powder than for the one with sole emulsion explosive. Both, theoretical and experimental, values of the detonation velocity have been shown to be higher for the powdered compositions than for the sole emulsion explosive. Shock sensitivity assessments have ended-up with a slightly bigger sensitivity for the compositions with double based powder when compared to the single based compositions or to the sole emulsion.

  4. The effect of high curing temperature on the reaction kinetics in MK/lime and MK-blended cement matrices at 60 deg. C

    International Nuclear Information System (INIS)

    Rojas, Moises Frias; Sanchez de Rojas, M.I.

    2003-01-01

    It is well known that the pozzolanic reaction between metakaolin (MK) and calcium hydroxide produces CSH, C 2 ASH 8 (stratlingite), C 4 AH 13 and C 3 ASH 6 (hydrogarnet). However, the presence or absence of these hydrated phases depends on different parameters, such as curing temperature, matrix used, etc. This paper shows the results of a study in order to know the effect of high curing temperature (60 deg. C) on the kinetics of the pozzolanic reaction in different matrices. MK/lime (calcium hydroxide) and MK-blended cement matrices were studied in samples stored and cured at 60 deg. C and up to 123 days of hydration. The nature, sequence and crystallinity of the hydrated phases were analysed using differential thermal analysis (DTA) and X-ray diffraction (XRD) techniques. Results showed that the sequence and formation of the hydrated phases was different in both matrices cured at 60 deg. C. In an MK/lime matrix, C 2 ASH 8 , C 4 AH 13 and C 3 ASH 6 were the main hydrated phases; while in an MK-blended cement, stratlingite was the sole hydrated phase issued from pozzolanic reaction. The DTA and XRD data also reveal an important fact: there is no evidence of the presence of hydrogarnet in blended cements

  5. Crystallization kinetics of BaO-Al2O3-SiO2 glasses

    Science.gov (United States)

    Bansal, Narottam P.; Hyatt, Mark J.

    1989-01-01

    Barium aluminosilicate glasses are being investigated as matrix materials in high-temperature ceramic composites for structural applications. Kinetics of crystallization of two refractory glass compositions in the barium aluminosilicate system were studied by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). From variable heating rate DTA, the crystallization activation energies for glass compositions (wt percent) 10BaO-38Al2O3-51SiO2-1MoO3 (glass A) and 39BaO-25Al2O3-35SiO2-1MoO3 (glass B) were determined to be 553 and 558 kJ/mol, respectively. On thermal treatment, the crystalline phases in glasses A and B were identified as mullite (3Al2O3-2SiO2) and hexacelsian (BaO-Al2O3-2SiO2), respectively. Hexacelsian is a high-temperature polymorph which is metastable below 1590 C. It undergoes structural transformation into the orthorhombic form at approximately 300 C accompanied by a large volume change which is undesirable for structural applications. A process needs to be developed where stable monoclinic celsian, rather than hexacelsian, precipitates out as the crystal phase in glass B.

  6. The effect of some wood preservatives on the thermal degradation of Scots pine

    International Nuclear Information System (INIS)

    Tomak, Eylem D.; Baysal, Ergun; Peker, Huseyin

    2012-01-01

    Highlights: ► Scots pine samples were impregnated with 10 commercial wood preservatives. ► Thermal degradation of wood was evaluated by TG, DTG and DTA. ► The thermal behavior of treated wood differed from that of untreated wood. ► Boron containing wood preservatives yielded more charcoal than other preservatives. ► Boric oxide and metal compounds in the formulations may affect char weight. - Abstract: Wood has been a structural material for many years; however, its ability to burn has limited its use in some applications. This study aims to evaluate the effect of commercial wood preservatives having concentration of 4% on the thermal behavior of Scots pine wood, and compare the fire retardant effectiveness of these preservatives with that of boron compounds. Thermal degradation of treated and untreated wood samples was evaluated by thermogravimetry (TG), differential thermogravimetry (DTG) and differential thermal analysis (DTA). Thermal behavior of treated wood differed from thermal behavior of untreated wood in terms of a high char yield. Results showed that weight loss of wood reduced while char yield increased in the charring phase of the pyrolysis in the boron containing preservative treated wood accompanying with pyrolysis temperature lowered. The highest char yield was obtained from the samples treated with disodium octaborate tetrahydrate in the all treated groups.

  7. Lanthanide complexes of 2-aminoacetophenone and 2-acetylaminoacetophenone 2-thenoylhydrazone

    International Nuclear Information System (INIS)

    Singh, Praveen K.; Singh, B.

    1998-01-01

    The reaction of lanthanide chlorides with 2-aminoacetophenone-2-thenoyl- hydrazone and 2-acetylaminoacetophenone-2-thenoylhydrazone yield complexes of the type [Ln(aath) 2 Cl 2 (H 2 )O]Cl and [Ln(acaath) 2 Cl 2 ]Cl. These complexes have been characterized by molar conductance, magnetic susceptibility, TGA, DTA and various spectroscopic techniques such as mass, IR, NMR, UV - visible and emission spectra. Mass spectral data indicate the aath complexes to be monomeric. Thermal stability of the complexes and presence of one water molecule in aath complex is indicated by TGA and DTA studies. Electronic spectra of Pr(III) and Nd(III) complexes show the coordination number to be nine and eight around the metal ions in the aath and acaath complexes, respectively. This has also been inferred from the spectral features of the hypersensitive transition in the Nd(III) complexes. The lowering in coordination number from aath to acaath complexes may be attributed to increase in chelate ring size and/or steric/inductive effect of methyl group. Emission spectral studies of the [Eu(aath) 2 Cl 2 (H 2 O)]Cl and [Eu(acaath) 2 Cl 2 ]Cl suggest tricapped trigonal prismatic (D 3h ) and square antiprismatic (D 4d ) geometry, respectively. (author)

  8. Phase relations in the system NaCl-KCl-H2O: IV. Differential thermal analysis of the sylvite liquidus in the KCl-H2O binary, the liquidus in the NaCl-KCl-H2O ternary, and the solidus in the NaCl-KCl binary to 2 kb pressure, and a summary of experimental data for thermodynamic-PTX analysis of solid-liquid equilibria at elevated P-T conditions

    Science.gov (United States)

    Chou, I.-Ming; Sterner, S.M.; Pitzer, Kenneth S.

    1992-01-01

    The sylvite liquidus in the binary system KCl-H2O and the liquidus in the ternary system NaCl-KCl-H2O were determined by using isobaric differential thermal analysis (DTA) cooling scans at pressures up to 2 kbars. Sylvite solubilities along the three-phase curve in the binary system KCl-H2O were obtained by the intersection of sylvite-liquidus isopleths with the three-phase curve in a P-T plot. These solubility data can be represented by the equation Wt.% KCl (??0.2) = 12.19 + 0.1557T - 5.4071 ?? 10-5 T2, where 400 ??? T ??? 770??C. These data are consistent with previous experimental observations. The solidus in the binary system NaCl-KCl was determined by using isobaric DTA heating scans at pressures up to 2 kbars. Using these liquidus and solidus data and other published information, a thermodynamic-PTX analysis of solid-liquid equilibria at high pressures and temperatures for the ternary system has been performed and is presented in an accompanying paper (Part V of this series). However, all experimental liquidus, solidus, and solvus data used in this analysis are summarized in this report (Part IV) and they are compared with the calculated values based on the analysis. ?? 1992.

  9. Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar

    International Nuclear Information System (INIS)

    Aly, M.; Hashmi, M.S.J.; Olabi, A.G.; Messeiry, M.; Abadir, E.F.; Hussain, A.I.

    2012-01-01

    Highlights: → Glass powder (GP) and nano-silica (CS) were used as a partial cement replacement in cement mortar (CM). → No damaging effect can be detected due to the reaction between GP and CM with particle size up to 75 μm. → Hybrid combination of GP/CS greatly improved mechanical properties and microstructure of CM. -- Abstract: This paper presents a laboratory study of the properties of colloidal nano-silica (CS)/waste glass cement composites. The microstructure, alkali-silica reaction (ASR), and the mechanical properties of cement mortars containing waste glass powder (WG) as a cement replacement with and without CS are investigated and compared with plain mortar. In addition, the hydration of cement compounds was followed by differential thermal analysis (DTA), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). The results show that incorporation of WG has a positive effect on the mechanical properties of cement mortars especially when CS is presented. In addition, the DTA/TGA results and XRD analysis show a reduction in the calcium hydroxide (CH) content in mortars with both WG and a hybrid combination of WG and CS. This confirms the improvement of mechanical properties and the occurrence of the pozzolanic reaction after 28 days of hydration.

  10. PENGARUH TEMPERATUR DAN IRADIASI TERHADAP INTERDIFUSI PARTIKEL BAHAN BAKAR JENIS U−7Mo/Al

    Directory of Open Access Journals (Sweden)

    Maman Kartaman Ajiriyanto

    2016-06-01

    Full Text Available ABSTRAK PENGARUH TEMPERATUR DAN IRADIASI TERHADAP INTERDIFUSI PARTIKEL BAHAN BAKAR JENIS U−7Mo/Al. Paduan U−7Mo/Al memiliki potensi besar sebagai bahan bakar reaktor riset, tetapi bahan bakar ini memiliki beberapa kekurangan antara lain dapat membentuk interaction layer pada antarmuka pada saat proses fabrikasi maupun iradiasi di reaktor melalui mekaniame difusi. Penelitian ini dilakukan untuk mengetahui terjadinya interaction layer yang disebabkan oleh interdifusi atau diffusion couple paduan U−7Mo dengan pelat AlMg2 yang dipanaskan pada temperatur 500 °C dan 550 °C selama 24 jam dalam tungku arc furnace dan tungku DTA pada temperatur 30 °C hingga 1400 °C. Hasil pengamatan mikrostruktur menggunakan Scanning Electron Microscope (SEM pada sampel diffusion couple hasil pemanasan pada temperatur 500 °C belum terlihat adanya interaction layeratau pembentukan fasa baru antara partikel U−Mo dan matriks Al. Sementara itu, pemanasan pada temperatur 550 °C telah terjadi interdifusi paduan U−7Mo dengan pelat AlMg2 menghasilkan senyawa (U,MoAlx pada antarmuka atau interface. Hal ini didukung oleh hasil analisis DTA menunjukkan bahwa paduan U−7Mo/Al pada 500 °C mempunyai kompatibilitas panas yang baik, tetapi diatas temperatur 550 °C telah terjadi perubahan fasa a + d menjadi a + g. Pemanasan hingga 679,14 °C terjadi fasa metastabil U(Al,Mox dan selanjutnya mengalami proses interdifusi dengan leburan uranium membentuk interaction layer berupa aglomerat senyawa UAlx (UAl4, UAl3 danUAl2. Aglomerat yang terbentuk dari proses pemanasan secara diffusion couple maupun dalam tungku DTA dibandingkan dengan aglomerat yang terbentuk akibat proses iradiasi. Bahan bakar paduan U−7Mo/Al yang diradiasi dengan burn up 58% mengalami interdifusi antara U−7Mo dengan matriks Al menghasilkan fasa metastabil U(Al,Mox yang berubah menjadi layer (U,MoAl7, presipitat UMo2Al20, (UMoAl3−Al dan membentuk boundary atau aglomerat UAlx (UAl4, UAl3 danUAl2

  11. Mineralogical characterization of the argillaceous material from the Municipality of Santa Barbara, Para, Brazil; Caracterizacao mineralogica de material argiloso proveniente do municipio de Santa Barbara, Para, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrando, E.A., E-mail: edemarino@ufpa.b [Universidade Federal do Para (UFPA), Maraba, PA (Brazil). Fac. de Engenharia de Materiais. Lab. de Materiais Ceramicos; Sheller, T.; Angelica, R.S. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Fac. de Geologia. Inst. de Geociencias; Neves, R.S. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Fac. de Engenharia Quimica. Inst. de Tecnologia

    2009-07-01

    In the present work were investigated mineralogical phases in a material with argillaceous characteristic of the region of Genipauba, Santa Barbara, State of Para. Characterization of the collected sample was performed by X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TG) and infrared spectroscopy (IR). The results of the assays indicate the presence of the clay minerals like kaolinite and muscovite, as well as minerals as quartz and anatase. (author)

  12. Mineralogical characterization of the argillaceous material from the Municipality of Santa Barbara, Para, Brazil

    International Nuclear Information System (INIS)

    Hildebrando, E.A.; Sheller, T.; Angelica, R.S.; Neves, R.S.

    2009-01-01

    In the present work were investigated mineralogical phases in a material with argillaceous characteristic of the region of Genipauba, Santa Barbara, State of Para. Characterization of the collected sample was performed by X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TG) and infrared spectroscopy (IR). The results of the assays indicate the presence of the clay minerals like kaolinite and muscovite, as well as minerals as quartz and anatase. (author)

  13. Thermal dehydration kinetics of phosphogypsum

    OpenAIRE

    López Gómez, Félix Antonio; Tayibi, Hanan; García-Díaz, Irene; Alguacil, Francisco José

    2015-01-01

    Phsophogypsum is a by-product from the processing phosphate rock. Before the use of it in cement industry such as setting regulator is necessary a study of dehydration reaction of phosphogypsum to avoid the false setting during the milling. The aim is to study the thermal behavior of two different phosphogypsum sources (Spain and Tunisia) under non-isothermal conditions in argon atmosphere by using Thermo-Gravimetriy, Differential Thermal Analysis (TG-DTA) and Differential Scanning Calori...

  14. Tritium in metals: Techniques of preparation

    International Nuclear Information System (INIS)

    Laesser, R.; Klatt, K.H.; Mecking, P.; Wenzl, H.

    1982-08-01

    In order to study the behavior of tritium in metals, an all metal apparatus has been built for the safe handling of 100 mg of tritium. Samples of palladium, vanadium, niobium, and tantalum were loaded with tritium, deuterium or hydrogen. Some details of the phase diagrams could be established by DTA and by measurement of the lattice parameters. The diffusion of tritium in V, Nb, and Ta was studied with the Gorsky-effect. (TWO)

  15. Thermochemistry of 1,1'-di-n-butyluranocene

    International Nuclear Information System (INIS)

    Kuznetsov, N.T.; Mitin, V.A.; Kir'yanov, K.V.; Sevast'yanov, V.G.; Bogdanov, V.A.

    1987-01-01

    Combustion enthalpy, temperature dependence of saturated vapor of uranium 1,1'-di-n-butylcyclooctatetraene (1,1'-di-n-butyluranocene) are determined for the first time and its thermal behaviour is studied using DTA and high temperature spectrophotometry. Melting and thermal decomposition beginning temperatures; melting and vaporization enthalpies; standard formation enthalpies in a condensed and gaseous states; mean dissociation energy of uranium bond to n-butylcyclooctatetraene are calculated according to the data obtained

  16. Estimation of laid energy in a γ radioactive wastes barrel

    International Nuclear Information System (INIS)

    Mechitoua, B.

    1999-01-01

    The purpose is to reproduce the results of a study realised at the Cea Grenoble ((DTA/CEREM/DEM) with the MCNPP4B code and an internal DAM code. The calculations concern the estimation of the percentage of the energy transferred to the organic matters contained in gamma radioactive wastes casks. After the checking it is estimated with the calculations codes the percentages of energy laid in more realistic configurations. (N.C.)

  17. Preparation and characterization of Yttrium-Aluminium garnet (Y3Al5O12)

    International Nuclear Information System (INIS)

    Ruzicka, J.; Niznansky, D.; Houzvicka, J.; Nikl, M.; Cerny, R.

    2009-01-01

    This work deals with the preparation of powders and transparent yttrium aluminium garnet (Y 3 Al 5 O 12 - YAG) from nanopowders. Stoichiometric amounts of nanocrystalline Al 2 O 3 and Y 2 O 3 were mixed and chemically pretreated using different basic agents and using ultrasonic bath. Resulting mixture was dried, pressed and heated up to 1750°C. Final material was characterized by X-ray diffraction, DTA and optical and electron microscopy

  18. The BBN Knowledge Acquisition Project

    Science.gov (United States)

    1988-09-01

    bmawt’s most ban for it w be comdmed a member of toe darn definted by dta concept. A slot consists of ’@A WMa dm@@Wg as W O*Jin do aw sudL 61 a role ne, a...When staking a new concept. KR&IE will prompt for t name of the new concept sod then a pop-up form will app an dt looks shdo Descriti !n Heme you may

  19. 我国某矿田硫化物和硫盐类矿物差热失重分析的研究

    Institute of Scientific and Technical Information of China (English)

    陈国玺

    1976-01-01

    DTA and TGA curves are presented for 117 samples of sulfide and sulfosalt minerals from a certain eassiterite-sulfide deposit. The differential thermal and thermogravimetric analyses were conducted under oxidation conditions and in inert atmospheres by use of China-made Model 4.1 Precise Differential Thermebalance. In conjunction with X-ray diffraction analysis, pyrrhotite and chaleopyrite of different crystal systems, silver-bearlng galena, jamesonite and boulangerite have been studied in more detail.

  20. Synthesis and characterization of tetraphenylporphyrinate of dysprosium route dysprosium acetylacetonate.; Sintesis y caracterizacion de un porfirinato de disprosio via acetilacetonato de disprosio.

    Energy Technology Data Exchange (ETDEWEB)

    Martinez M, V

    1993-12-31

    Dysprosium bis (tetraphenylporphyrinate) and bis (dysprosium) Tris (tetraphenylporphyrinate) were synthesized from dysprosium tetraphenylporphyrinate prepared in situ, and characterized by IR, UV-vis, TGA, DTA, EPR and magnetic susceptibility measurements. The double decker compound was obtained by direct oxidation of the HDy(TPP){sub 2} intermediate. The existence of the radical anion, (TPP){sup -} , in the double decker product was conformed by EPR spectrometry. Dysprosium monoporphyrinate was isolated and characterized by the same techniques. (Author).

  1. JCSC_129_02_0239_0247_SI.docx

    Indian Academy of Sciences (India)

    Abdul

    a There is no reaction when single crystals of 1 are heated to 150˚C.b Manual grinding using pestle and mortar. Figure S1. (a) 1H NMR spectra of 1 before UV irradiation in DMSO-d6. (b) 1H NMR spectra of 5 min ground sample (1b) after 25 UV irradiation in DMSO-d6. TGA. Figure S2. (a) TGA/DTA analysis of 20 min ...

  2. Thermal behavior and decomposition of cerium(III) butanoate, pentanoate and hexanoate salts upon heating in argon

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Suarez Guevara, Maria Josefina; Yue, Zhao

    2017-01-01

    The thermal behavior and decomposition of Ce-butanoate monohydrate (Ce(C3H7CO2)3·H2O), Ce-pentanoate (Ce(C4H9CO2)3) and Ce-hexanoate (Ce(C5H11CO2)3) were studied in a flow of argon while heating at 5 °C/min. By means of several techniques such as simultaneous TG-DTA, FTIR evolved gas analysis, in...

  3. French participation to PISC III

    International Nuclear Information System (INIS)

    Birac, C.

    1994-06-01

    The PISC III programme was set up in 1986 after the conclusions of the PISC II programme. The main objective was assessment of ISI procedures on few particular components or materials. France with IPSN, CEA/DTA, DCN INDRET, EDF, FRAMATOME and INTERCONTROLE decided to have an important participation in several of the eight actions. This paper describes shortly the key points of this participation and the consequences in France. (authors). 10 figs., 1 tab

  4. Synthesis and characterization of tetraphenylporphyrinate of dysprosium route dysprosium acetylacetonate

    International Nuclear Information System (INIS)

    Martinez M, V.

    1992-01-01

    Dysprosium bis (tetraphenylporphyrinate) and bis (dysprosium) Tris (tetraphenylporphyrinate) were synthesized from dysprosium tetraphenylporphyrinate prepared in situ, and characterized by IR, UV-vis, TGA, DTA, EPR and magnetic susceptibility measurements. The double decker compound was obtained by direct oxidation of the HDy(TPP) 2 intermediate. The existence of the radical anion, (TPP) - , in the double decker product was conformed by EPR spectrometry. Dysprosium monoporphyrinate was isolated and characterized by the same techniques. (Author)

  5. Study of the tellurite-rich composition range in the Bi2O3-TeO2 system

    International Nuclear Information System (INIS)

    Ghazaryan, A.A.

    2015-01-01

    The TeO 2 and Bi 2 O 3 based glasses and glass ceramics are widely used for various technical needs. However, information about the phase diagram of the Bi 2 O 3 -TeO 2 system is limited, and the existing data are inconsistent. According to Demina L.A. with co-authors the Bi 2 Te 4 O 1 1 compound has a congruent melting at 662°C and forms two eutectics with neighbors. In another case, according to the Schmidt P. with co-authors, it melts incongruently at 645°C without indication of Liquidus temperature. It was the motivation for the Bi 2 Te 4 O 1 1 melting behavior investigation and the binary Bi 2 O 3 -TeO 2 system phase diagram correction in the TeO 2 rich area of compositions. As initial materials the glass and solid state sintered samples were used for these purposes. The differential thermal and X-ray analyses were used for glassy and crystallized products identification. The exothermic effect with maximum at 420°C and two endothermal effects with minimum at 635°C and 720 Degree C are clearly observed on the DTA curve of the 80 TeO 2 -20 Bi 2 O 3 (mol.percent) glass composition corresponding to the Bi 2 Te 4 O 1 1 compound. The product of Bi 2 Te 4 O 1 1 glass powder crystallization at 420°C is the Bi 2 Te 4 O 1 1 compound with melting point of 635 ± 5°C. The second endothermic effect on the DTA curve in the range of temperature 680-765°C with minimum at 720°C, is associated with dissolution of TeO 2 in the melt, formed as result of the Bi 2 Te 4 O 1 1 incongruent melting. The existence of eutectic E 1 (87 mol.percent TeO 2 ) between Bi 2 Te 4 O 1 1 and TeO 2 with a melting point of 580 ±5°C has been confirmed. Incongruent melting promotes the peritectic P 1 (81 mol.percent TeO 2 ) formation between Bi 2 Te 4 O 1 1 and eutectic E 1 (87 mol.percent TeO 2 ) with a melting point of 635±5°C. Three endothermic effects at 560 °C, 635 °C and 720°C have been observed on the DTA curve of Bi 2 Te 4 O 1 1 compound, obtained by solid state synthesis. Last

  6. Thermal, structural and magnetic properties of some zinc phosphate glasses doped with manganese ions

    International Nuclear Information System (INIS)

    Pascuta, Petru; Bosca, Maria; Borodi, Gheorghe; Culea, Eugen

    2011-01-01

    Research highlights: → MnO) x .(P 2 O 5 ) 40 .(ZnO) 60-x glasses (0 ≤ x ≤ 20 mol%) were prepared by the melt-quenching technique. → The DTA data indicate a good thermal stability of the studied glasses. → EPR spectra shows isolated Mn 2+ ions in octahedral symmetric sites or to associated ones when the Mn 2+ ions are involved in dipole-dipole and/or superexchange interactions. → The magnetic susceptibility data revealed superexchange magnetic interactions involving manganese ions, antiferromagnetically coupled for the sample containing 20 mol% MnO. - Abstract: (MnO) x .(P 2 O 5 ) 40 .(ZnO) 60-x glasses containing different concentrations of MnO ranging from 0 to 20 mol% were prepared by the melt-quenching technique. The samples had a fixed P 2 O 5 content of 40 mol% and the MnO:ZnO ratio was varied. The thermal, structural and magnetic properties of these glasses were investigated by means of differential thermal analysis (DTA), electron paramagnetic resonance (EPR) and magnetic susceptibility measurements. Compositional dependence of the glass transition (T g ), crystallization (T p ) and melting temperatures were determined by DTA investigations. From the dependence of the T g on the heating rate (a), the activation energy of the glass transition (E g ) was calculated. The fragility index (F) for the studied glasses was determined to see whether these materials are obtained from kinetically strong-glass-forming (KS) or kinetically fragile-glass forming (KF) liquids. The EPR spectra of the studied glasses revealed absorptions centered at g ∼ 2.0, 3.3 and 4.3. The compositional variations of the intensity and line width of these absorption lines was interpreted in terms of the variation in the concentration of the Mn 2+ and Mn 3+ ions in the glass and the interaction between the manganese ions. EPR and magnetic susceptibility data reveal that both Mn 2+ and Mn 3+ ions are present in the studied glasses, their relative concentration being dependent on

  7. Thermal Properties of Lunar Regolith Simulants

    Science.gov (United States)

    Street, Kenneth; Ray, Chandra; Rickman, Doug

    2010-01-01

    Various high temperature chemical processes have been developed to extract oxygen and metals from lunar regolith. These processes are tested using terrestrial analogues of the regolith. But all practical terrestrial analogs contain H2O and/or OH-, the presence of which has substantial impact on important system behaviors. We have undertaken studies of lunar regolith simulants to determine the limits of the simulants to validate key components for human survivability during sustained presence on the moon. Differential Thermal Analysis (DTA) yields information on phase transitions and melting temperatures. Themo-Gravimetric Analysis (TGA) with mass spectrometric (MS) determination of evolved gas species yields chemical information on various oxygenated volatiles (water, carbon dioxide, sulfur oxides, nitrogen oxides and phosphorus oxides) and their evolution temperature profiles. The DTA and TGAMS studies included JSC-1A fine, NU-LHT-2M and its proposed feed stocks: anorthosite; dunite; HQ (high quality) glass and the norite from which HQ glass is produced. Fig 1 is a data profile for anorthosite. The DTA (Fig 1a) indicates exothermic transitions at 355 and 490 C and endothermic transitions at 970 and 1235 C. Below the 355 C transition, water (Molecular Weight, MW, 18 in Fig 1c) is lost accounting for approximately 0.1% mass loss due to water removal (Fig 1b). Just above 490 C a second type of water is lost, presumably bound in lattices of secondary minerals. Between 490 and the 970 transition other volatile oxides are lost including those of hydrogen (third water type), carbon (MW = 44), sulfur (MW = 64 and 80), nitrogen (MW 30 and 46) and possibly phosphorus (MW = 79, 95 or 142). Peaks at MW = 35 and 19 may be attributable to loss of chlorine and fluorine respectively. Negative peaks in the NO (MW = 30) and oxygen (MW = 32) MS profiles may indicate the production of NO2 (MW = 46). Because so many compounds are volatilized in this temperature range quantification of

  8. Influence of lanthanium atoms on the physico-chemical properties of GeS0,5Se0,5 solid solutions

    International Nuclear Information System (INIS)

    Murguzov, M.I.; Alakbarov, A.S.; Bayramov, R.B.

    2010-01-01

    By the methods of physical-chemical analysis (DTA, X-ray, MSA, as well as measurement of microhardness and density determination) the influence of La on the physico-chemical properties of solid solutions (GeS 0 ,5Se 0 ,5) 1 -x(La) x was studied and its microdiagram was plotted. At room temperature the GeS 0 ,5Se 0 ,5 based solid solid solution extent to 4 at. percent La. The dependence of lanthane microhardness was studied

  9. Production of Synthetic Phosphoanhydrite and Its Use as a Binder in Self-Leveling Underlayments (SLU)

    OpenAIRE

    Schaefer, Cec?lia Ogliari; Cheriaf, Malik; Rocha, Jana?de Cavalcante

    2017-01-01

    An experimental study was conducted to investigate the potential use of phosphogypsum (PG) to produce self-leveling underlayments. The study was designed in two stages. Initially a phosphoanhydrite (PA) was produced by heating phosphogypsum at temperatures of 350 ?C, 450 ?C, 550 ?C, and 650 ?C. Two periods of heating were applied (2 and 4 h). The formation of anhydrite was determined by thermogravimetric analysis (DTA-TG) and confirmed by X-ray diffraction (XRD). The results show that anhydri...

  10. Spectral and thermal investigation of tetrabenzoylacetonatobenzoylacetonediuranyl

    International Nuclear Information System (INIS)

    Kostyuk, N.N.; Dik, T.A.; Klavsut', G.N.; Umrejko, D.S.

    1989-01-01

    Uranium(6) compound with benzoylacetone (NBA) of [(UO 2 ) 2 (NBA)(BA) 4 ] composition was prepared by the method of electrochemical synthesis in oxidizing medium. Spectral and thermal investigation (data of IR, Raman spectra, TG, DTA) was conducted to show that four NBA molecules entered the compound as acidoligands and one NBA molecule (being a bridge) - as neutral ligand in keto-form. Mechanism of thermal decomposition was suggested and kinetic parameters of thermolysis of examined substance were calculated

  11. Adsorption Behavior of Trinitrotoluene by Rice Husk Carbon

    Science.gov (United States)

    Fu, Dan

    2018-03-01

    Trinitrotoluene could be adsorbed by many materials. The adsorption properties of Trinitrotoluene were studied in this paper by Rice husk carbon (RHC). The influence factors of pH value of Trinitrotoluene wastewater, adsorbent dosage and the ratio of dilution to wastewater were examined. The results of TG–DTA analysis showed that the main temperature ranges of thermal decomposition for the RHC was 324-467°C. The study indicates that RHC can be used in wastewater to removal Trinitrotoluene.

  12. Synthesis and thermochemistry of vaporization of uranium tetrakis(2,6,6-trimethyl-2-methoxy-3,5-heptanedionate) -U(ODPM)4 (1); uranium tetrakis(2,6-dimethyl-2-methoxy-3,5-heptanedionate) - U(OPPM)4 (2)

    International Nuclear Information System (INIS)

    Sevast'yanov, V.G.; Krasnodubskaya, S.V.; Kurtasov, O.V.; Alikhanyan, A.S.; Kuznetsov, N.T.; Zanina, A.S.

    1990-01-01

    Tensimetrically pure samples of (1) and (2) complexes are obtained by exchange reaction between uranium tetrachloride and respective sodium β-diketonate. The temperature dependence of saturated vapour pressure is found by Knudsen diffusion method. The mean value of sublimation enthalpy are equal to 160.7±6.3 kJ·mol -1 (387-428 K) (1), 121±18.4 kJ·Mol -1 (344-377 K). The melting temperature and enthalpy are found by DTA method

  13. INFLUENCE OF BIOPRETREATMENT ON THE CHARACTER OF CORN STOVER LIGNIN AS SHOWN BY THERMOGRAVIMETRIC AND CHEMICAL STRUCTURAL ANALYSES

    OpenAIRE

    Xuewei Yang; Yelin Zeng; Xiaoyu Zhang

    2010-01-01

    The effect of corn stover lignin structure alteration caused by white-rot fungi pretreatment on the pyrolysis kinetics was studied by FTIR and TG/DTA. Results showed that biopretreatment had a remarkable effect on lignin pyrolysis. Biopretreatment can decrease the activation energy and increase the pre-exponential factor in the initial stage of pyrolysis, which makes it possible to start the lignin pyrolysis at a relatively gentle condition and improve the availability of biomass pyrolysis as...

  14. The system SnTe-InSe

    International Nuclear Information System (INIS)

    Gurshumov, A.P.; Alidzhanov, M.A.; Aliev, A.S.; Gadzhiev, T.G.; Mamedov, N.A.

    1986-01-01

    This paper discusses the nature of the interaction and physicochemical properties of the alloys of the system SnTe-InSe. The DTA was performed on an NTR-74 pyrometer, XPA on a Dron-2.0 diffractometer and MSA on an MIM-7 metallographic microscope. The microhardness of the samples was determined on a PMT-3 microhardness tester. The congruently melting compound SnInTeSe and solid solutions based on the starting components are formed in the system

  15. Synthesis, Characterization and Evaluation of the Transformations in Hibiscus sabdariffa-graft-poly(butyl acrylate

    Directory of Open Access Journals (Sweden)

    B. S. Kaith

    2008-01-01

    Full Text Available Different reaction parameters for the graft copolymerization of butyl acrylate onto Hibiscus sabdariffa fiber were optimized. Graft copolymers thus obtained were subjected to characterization using XRD, TGA, DTA, SEM and FTIR techniques and were evaluated for physio-chemical changes in the behavior. The percentage crystallinity and crystallinity index were found to decrease with increase in grafting while there was reduction in moisture absorption and increase in chemical, thermal resistance of the graft copolymers.

  16. Studies on the thermal decomposition of lanthanum(III) valerate and lanthanum(III) caproate in argon

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Yue, Zhao; Suarez Guevara, Maria Josefina

    2015-01-01

    The decomposition of La-valerate (La(C4H9CO2)3·xH2O (x ≈ 0.45)) and La-caproate (La(C5H11CO2)3·xH2O (x ≈ 0.30)) was studied upon heating at 5 C/min in a flow of argon. Using a variety of techniques including simultaneous TG-DTA, FTIR, X-ray diffraction with both laboratory Cu Kα and synchrotron s...

  17. Synthesis of complex oxides with garnet structure by spray drying of an aqueous salt solution

    Science.gov (United States)

    Makeenko, A. V.; Larionova, T. V.; Klimova-Korsmik, O. G.; Starykh, R. V.; Galkin, V. V.; Tolochko, O. V.

    2017-04-01

    The use of spray drying to obtain powders of complex oxides with a garnet structure has demonstrated. The processes occurring during heating of the synthesized oxide-salt product, leading to the formation of a material with a garnet structure, have been investigated using DTA, TGA, XPS, and XRD. It has been shown that a single-phase garnet structure of system (Y x Gd(3- x))3Al5O12 can be synthesized over the entire range of compositions.

  18. REMOVAL OF CRYSTAL VIOLET BY BIOSORPTION ONTO DATE STONES

    OpenAIRE

    NOUREDDINE EL MESSAOUDI; MOHAMMED EL KHOMRI; SAFAE BENTAHAR; ABDELLAH DBIK; ABDELLAH LACHERAI

    2016-01-01

    The biosorption has the advantage that it can be applied to effluent disposal and thus brings various responses to the regulatory requirements for environmental protection. This study presents the results obtained from the use of date stones (DS) for the elimination of crystal violet (CV) from aqueous medium. Several analysis techniques were used to determine the different characteristics of biosorbent studied (FTIR, TGA-DTA, SEM and pHzpc).The physico-chemical parameters influence of the bio...

  19. Removal of Heavy Metals from Drinking Water by Magnetic Carbon Nanostructures Prepared from Biomass

    OpenAIRE

    Muneeb Ur Rahman Khattak, Muhammad; Zahoor, Muhammad; Muhammad, Bakhtiar; Khan, Farhat Ali; Ullah, Riaz; AbdEI-Salam, Naser M.

    2017-01-01

    Heavy metals contamination of drinking water has significant adverse effects on human health due to their toxic nature. In this study a new adsorbent, magnetic graphitic nanostructures were prepared from watermelon waste. The adsorbent was characterized by different instrumental techniques (surface area analyzer, FTIR, XRD, EDX, SEM, and TG/DTA) and was used for the removal of heavy metals (As, Cr, Cu, Pb, and Zn) from water. The adsorption parameters were determined for heavy metals adsorpti...

  20. Whole-cell or acellular pertussis vaccination in infancy determines IgG subclass profiles to DTaP booster vaccination

    NARCIS (Netherlands)

    van der Lee, Saskia; Sanders, Elisabeth A.M.; Berbers, Guy A M; Buisman, Anne-Marie

    2018-01-01

    Introduction Duration of protection against pertussis is shorter in adolescents who have been immunized with acellular pertussis (aP) in infancy compared with adolescents who received whole-cell pertussis (wP) vaccines in infancy, which is related to immune responses elicited by these priming

  1. Whole-cell or acellular pertussis vaccination in infancy determines IgG subclass profiles to DTaP booster vaccination.

    NARCIS (Netherlands)

    van der Lee, Saskia; Sanders, Elisabeth A M; Berbers, Guy A M; Buisman, Anne-Marie

    2018-01-01

    Duration of protection against pertussis is shorter in adolescents who have been immunized with acellular pertussis (aP) in infancy compared with adolescents who received whole-cell pertussis (wP) vaccines in infancy, which is related to immune responses elicited by these priming vaccines. To better

  2. Crystallization study of Sn additive Se–Te chalcogenide alloys

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Rahim, M.A.; Gaber, A.; Abu-Sehly, A.A.; Abdelazim, N.M., E-mail: nana841@hotmail.co.uk

    2013-08-20

    Highlights: • The aim of the work deals with studying the crystallization kinetics by using different method. • Values of various kinetic parameters were calculated. • The results indicate that the rate of crystallization is related to the thermal stability and glass forming ability. - Abstract: Results of differential thermal analysis (DTA) under non-isothermal conditions of glasses Se{sub 90−x}Te{sub 10}Sn{sub x} (x = 0, 2.5, 5 and 7 at.%) are reported and discussed. The glass transition temperature (T{sub g}), the onset crystallization temperature (T{sub c}) and the peak temperature of crystallization (T{sub p}) were found to be dependent on the compositions and the heating rate. Values of various kinetic parameters such as activation energy of glass transition (E{sub g}), activation energy of crystallization (E{sub c}), rate constant (K{sub p}), Hurby number (H{sub r}) and the order parameter (n) were determined. For the present systems, the results indicate that the rate of crystallization is related to thermal stability and glass forming ability (GFA). According to the Avrami exponent (n), the results show a one dimensional growth for the composition Se{sub 90}Te{sub 10} and a three dimensional growth for the three other compositions. The crystalline phases resulting from DTA and (SEM) have been identified using X-ray diffraction.

  3. Studi Transformasi Fasa Sistem Besi Karbon dengan Pengamatan Thermal Diferensial

    Directory of Open Access Journals (Sweden)

    Azwar Manaf

    2002-04-01

    Full Text Available Phase Transformation Studies of Fe-C System with Differential Thermal Analyzer: Phase transformation studies for ironcarbon (Fe-C system have been done by means of Differential Thermal Analyzer, DTA. Fe-C samples of nominal compositions for respectively low carbon containing alloy (0.1 wt.%, hypo eutectoid (0.4 wt.%, and eutectoid (0.8 wt.% were prepared by powder metallurgy process using pure Fe and C powder materials (>99 % as the feed stock. Measurement by DTA in the temperature range 25 oC–1100 oC for the samples indicated that there are two endothermic temperatures transition in pure Fe sample respectively at 773.8 oC associated with phase transformation of ferromagnetic (α to paramagnetic (β and at 930oC due to a phase transformation of β-ferrite to austenite (γ. The two transition temperature was also consistently observed in all Fe-C samples but with one additional temperature transition at about 753 oC associated with a phase transformation of pearlite to austenite. Data of heat change measurement in the temperature range 25 oC-1100 oC were subsequently used for determination of heat capacity, Cp for the Fe-C samples as the function of T. Cp (T curves when fi tted by polynomial regression have resulted in regression coeffi cients between 0.8 and 1.0.

  4. Extractive spectrophotometric determination of molybdenum in steels and nickel base high-temperature alloys as a ternary complex with hydroxylamine hydrochloride and 4-(2-pyridylazo) resorcinol

    International Nuclear Information System (INIS)

    Reddy, M.R.P.; Kumar, P.V.S.; Shyamsundar, J.P.; Anjaneyulu, Y.

    1990-01-01

    The red coloured, ternary complex formed by molybdenum(VI) with hydroxylamine hydrchloride and 4-(2-pyridylazo) resorcinol (PAR), on heating for 20 minutes in a hot water bath at pH 6-8, can be extracted with a mixture of n-butanol and benzene (4:1). This complex exhibits absorption maximum at 530nm with a molar absorptivity of 2.8x10 4 lit. mol -1 cm -1 and obeys Beer's law upto 4.5μg/ml of Mo(VI). The composition of the complex is found to be 1:1:1, for Mo(VI): hydroxylamine hydrochloride: PAR. Large amounts of tartaric acid and 2, 2-diamino-cyclohexane tetra acetic acid (CyDTA) can be tolerated in this method. The extraction becomes highly selective in presence of CyDTA (3ml of 5x10 -2 M) and interference of ions like Fe(III)(5mg), Pb(II)(4mg), Zn(II)(2mg), Cu(II)(4mg), Mn(II)(3mg), Ni(II)(4mg), Sn(II)(3mg), Cr(VI)(2mg) and Bi(III)(0.5mg) can be effectively supressed in the determination of 10-45μg of molybdenum. The method can be successfully applied for the determination of molybdenum in steels and nickel base high temperature alloys. (author). 2 tabs., 8 refs

  5. Syntheses, structural elucidation, thermal properties, theoretical quantum chemical studies (DFT and biological studies of barbituric–hydrazone complexes

    Directory of Open Access Journals (Sweden)

    Amina A. Soayed

    2015-03-01

    Full Text Available Condensation of barbituric acid with hydrazine hydrate yielded barbiturichydrazone (L which was characterized using IR, 1H NMR and mass spectra. The Co(II, Ni(II and Cu(II complexes derived from this ligand have been synthesized and structurally characterized by elemental analyses, spectroscopic methods (IR, UV–Vis and ESR and thermal analyses (TGA, DTG and DTA and the structures were further elucidated using quantum chemical density functional theory. Complexes of L were found to have the ML.nH2O stoichiometry with either tetrahedral or octahedral geometry. The ESR data showed the Cu(II complex to be in a tetragonal geometry. Theoretical investigation of the electronic structure of metal complexes at the TD-DFT/B3LYP level of theory has been carried out and discussed. The fundamental vibrational wavenumbers were calculated and a good agreement between observed and scaled calculated wavenumbers was achieved. Thermal studies were performed to deduce the stabilities of the ligand and complexes. Thermodynamic parameters, such as the order of reactions (n, activation energy ΔE∗, enthalpy of reaction ΔH∗ and entropy ΔS∗ were calculated from DTA curves using Horowitz–Metzger method. The ligand L and its complexes have been screened for their antifungal and antibacterial activities and were found to possess better biological activities compared to those of unsubstituted barbituric acid complexes.

  6. Characterization on the precipitate sample of cetyltrimethylammonium bromide adsorbed onto nanocube CaCO3 particles from aqueous-ammonia-rich solution

    International Nuclear Information System (INIS)

    Rivera Virtudazo, Raymond V.; Fuji, Masayoshi; Takai, Chika; Shirai, Takashi

    2012-01-01

    Physicochemical analysis on the precipitate samples of the cationic cetyltrimethylammonium bromide (CTAB) adsorbed onto nanocube CaCO 3 particles (NcCP) in aqueous ammonia rich (NH 4 + ) solution was initially examined. The amount of CTAB added to the (<100 nm) NcCP ranging from 0.04 to 88.5 mM was prepared under room temperature aqueous alkaline condition and characterized by thermogravimetry/differential thermogravimetric analysis (TGA/DTA), Raman spectroscopy (RS), scanning electron microscopy, transmission electron microscopy (TEM), gas chromatograph combined with mass spectrometer analysis (GC–MS), and powder X-ray diffraction pattern. RS, GC–MS, and TGA/DTA analyses indicate that only layer of CTAB molecules were present on the surface of the NcCP. Moreover, this thin sheet layer was morphologically observed by the TEM image (particularly at 88 mM concentration of CTAB). In general, adsorption of CTAB molecules onto NcCP under aqueous alkaline medium had no effect on the cubic crystal structure and particle morphology. The present study confirms the adsorption mechanism of cationic surfactant onto NcCP colloids model and contributes to the better understanding of the possible structural arrangement of the sorbed surfactant molecules onto the NcCP-aqueous alkaline interface by simple characterization method. This investigation is expected to create new, low-cost route to produce promising nanopowders and conversion to hollow particles with multi-component porous surface shell wall.

  7. Keggin type polyoxometalate H4[αSiW12O40].nH2O as intercalant for hydrotalcite

    Directory of Open Access Journals (Sweden)

    Neza Rahayu Palapa

    2017-06-01

    Full Text Available The synthesis of hydrotalcite and polyoxometalate H4[αSiW12O40].nH2O with the ratio (2:1, (1:1, (1:2 and (1:3 has been done. The product of intercalation was characterized using FT-IR spectrophotometer, XRD, and TG-DTA. Polyoxometalate H4[αSiW12O40].nH2O intercalated layered double hydroxide was optimised to use as adsorbent Congo red dye. Characterization using FT-IR was not showing the optimal insertion process. The result using XRD characterization was showed successful of polyoxometalate H4[αSiW12O40].nH2O inserted layered double hydroxide with a ratio (1:1 which the basal spacing was expanded from 7,8 Ȧ to 9,81 Ȧ. Furthermore, the thermal analysis was performed using TG-DTA. The result show that the decomposition of polyoxometalate H4[αSiW12O40].nH2O intercalated  hydrotalcite with ratio (1:1 was occured at 80oC to 400oC with a loss of OH in the layer at 150oC to 220oC, and then the decomposition of the compound polyoxometalate H4[αSiW12O40].nH2O at 350oC to 420oC. Keywords: Hydrotalcite, Layered Double Hydroxide, Polyoxometalate, Intercalation

  8. Synthesis and characterization of Cu{sub 3}TaIn{sub 3}Se{sub 7} and CuTa{sub 2}InTe{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Calderon, E.; Munoz-Pinto, M.; Duran-Pina, S.; Quintero, M.; Quintero, E.; Morocoima, M. [Centro de Estudios de Semiconductores, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida (Venezuela); Delgado, G.E. [Laboratorio de Cristalografia, Departamento de Quimica, Facultad de Ciencias, Universidad de Los Andes, Merida (Venezuela); Romero, H. [Laboratorio de Magnetismo, Departamento de Fisica, Facultad de Ciencias, Universidad de Los Andes, Merida (Venezuela); Briceno, J.M.; Fernandez, J. [Laboratorio de Analisis Quimico y Estructural (LAQUEM), Departamento de Fisica, Facultad de Ciencias, Merida (Venezuela); Grima-Gallardo, P.

    2008-07-15

    Polycrystalline samples of Cu{sub 3}TaIn{sub 3}Se{sub 7} and CuTa{sub 2}InTe{sub 4} were synthesized by the usual melt and anneal technique. X-ray powder diffraction showed a single phase behavior for both samples with tetragonal symmetry and unit cell parameter values a=5.794{+-}0.002 A, c=11.66{+-}0.01 A, c/a=2.01, V=391{+-}1 A{sup 3} and a=6.193{+-}0.001 A, c=12.400 {+-}0.002A, c/a=2.00, V=475{+-}1 A{sup 3}, respectively. Differential thermal analysis (DTA) measurements suggested a complicated behavior near the melting point with several thermal transitions observed in the heating and cooling runs. From the shape of the DTA peaks it was deduced that the melting is incongruent for both materials. Magnetic susceptibility measurements (zero-field cooling and field cooling) indicated an antiferromagnetic character with transition temperatures of T=70 K (Cu{sub 3}TaIn{sub 3}Se{sub 7}) and 42 K (CuTa{sub 2}InTe{sub 4}). A spin-glass transition was observed in Cu{sub 3}TaIn{sub 3}Se{sub 7} with T{sub f}{approx}50 K. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  9. Crystallization kinetics of magnetic glass-ceramics prepared by the processing of waste materials

    International Nuclear Information System (INIS)

    Francis, A.A.

    2006-01-01

    The objective of the present investigation was to study the feasibility of conversion of an intimate mixture of blast furnace slag and blast furnace flue dust generated by a single industrial company into magnetic glass-ceramic product. Blast furnace slag (BFS) and blast furnace flue dust (BFD) are generated at a rate of 300,000 and 30,000 tons/year, respectively, from iron and steel factory. The crystallization mechanisms of a composition containing BFS and BFD in a 50/50 proportion were investigated by differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The crystallization temperature was found to vary from 900 to 1100 deg. C and two phases appeared in the crystallized samples: pyroxene Ca(Mg, Fe, Al)(Si, Al) 2 O 6 and magnetite/maghemite. Heating rate and particle sizes effects on crystal growth of powdered samples were studied by DTA. The apparent activation energy of crystal growth using the particle size 180-315 μm was determined to be 355 and 329 kJ/mol for the first and second peak, respectively. The presence of sharp and broad crystallization peaks indicate simultaneous surface and internal crystallization mechanism. Good wear resistance and chemical durability particularly in alkaline environment, combine with good hardness and magnetic properties make this glass-ceramic material potentially useful for various industrial applications

  10. Structural study of some divalent aluminoborate glasses using ultrasonic and positron annihilation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Saddeek, Yasser B. [Physics Department, Faculty of Science, Al-Azhar University, Assiut (Egypt); Mohamed, Hamdy F.M. [Physics Department, Faculty of Science, El-Minia University, B.O. 61519 El-Minia (Egypt); Azooz, Moenis A. [Glass Research Department, National Research Center, Dokki, Cairo (Egypt)

    2004-07-01

    Positron annihilation lifetime (PAL), ultrasonic techniques, and differential thermal analysis (DTA) were performed to study the structure of some aluminoborate glasses. The basic compositions of these glasses are 50 B{sub 2}O{sub 3}+ 10 Al {sub 2}O {sub 3}+40RO (wt%), where RO is the divalent oxide (MgO, CaO, SrO, and CdO). The ultrasonic data show that the rigidity increases from MgO to CaO then decrease at SrO and again increases at CdO. The glass transition temperature (determined from DTA) decreases from MgO to SrO then increases at CdO. The trend of the thermal properties was attributed to thermal stability. The experimental data are correlated with the internal glass structure and its connectivity. The PAL data show that an inversely correlation between the relative fractional of the open hole volume and the density of the samples. Also, there is a good correlation between the ortho-positronium (o-Ps) lifetime (open hole volume size) and the bulk modulus of the samples (determined from ultrasonic technique). The open volume hole size distribution for the samples shows that the open volume holes expand in size for CaO, SrO, MgO, and CdO, respectively with their distribution function moving to higher volume size. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Structural study of some divalent aluminoborate glasses using ultrasonic and positron annihilation techniques

    International Nuclear Information System (INIS)

    Saddeek, Yasser B.; Mohamed, Hamdy F.M.; Azooz, Moenis A.

    2004-01-01

    Positron annihilation lifetime (PAL), ultrasonic techniques, and differential thermal analysis (DTA) were performed to study the structure of some aluminoborate glasses. The basic compositions of these glasses are 50 B 2 O 3 + 10 Al 2 O 3 +40RO (wt%), where RO is the divalent oxide (MgO, CaO, SrO, and CdO). The ultrasonic data show that the rigidity increases from MgO to CaO then decrease at SrO and again increases at CdO. The glass transition temperature (determined from DTA) decreases from MgO to SrO then increases at CdO. The trend of the thermal properties was attributed to thermal stability. The experimental data are correlated with the internal glass structure and its connectivity. The PAL data show that an inversely correlation between the relative fractional of the open hole volume and the density of the samples. Also, there is a good correlation between the ortho-positronium (o-Ps) lifetime (open hole volume size) and the bulk modulus of the samples (determined from ultrasonic technique). The open volume hole size distribution for the samples shows that the open volume holes expand in size for CaO, SrO, MgO, and CdO, respectively with their distribution function moving to higher volume size. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  12. Private-sector vaccine purchase costs and insurer payments: a disincentive for using combination vaccines?

    Science.gov (United States)

    Clark, Sarah J; Cowan, Anne E; Freed, Gary L

    2011-04-01

    Combination vaccines have been endorsed as a means to decrease the number of injections needed to complete the childhood immunization schedule, yet anecdotal reports suggest that private providers lose money on combination vaccines. The objective of this study was to determine whether practices purchasing combination vaccines had significantly different vaccine costs and reimbursement compared to practices that were not purchasing combination vaccines. Using cross-sectional purchase and insurer payment data collected from a targeted sample of private practices in five US states, we calculated the average total vaccine cost and reimbursement across the childhood immunization schedule. The average vaccine purchase cost across the childhood schedule was significantly higher for practices using a combined vaccine with diphtheria, tetanus, acellular pertussis vaccine, inactivated polio vaccine, and Hepatitis B vaccine (DTaP-IPV-HepB) than for practices using either separate vaccine products or a combined vaccine with Haemophilus influenzae, type b vaccine and Hepatitis B vaccine (Hib-HepB). The average insurer payment for vaccine administration across the childhood schedule was significantly lower for practices using DTaP-IPV-HepB combination vaccine than for practices using separate vaccine products. This study appears to validate anecdotal reports that vaccine purchase costs and insurer payment for combination vaccines can have a negative financial impact for practices that purchase childhood vaccines.

  13. Engineering of Highly Susceptible Paramagnetic Nanostructures of Gd2S3:Eu3+: Potentially an Efficient Material for Room Temperature Gas Sensing Applications

    Directory of Open Access Journals (Sweden)

    Muhammed M. Radhi

    2010-11-01

    Full Text Available This research papers throws light into the compositional, morphological and structural properties of novel nanoparticles of Gd2S3:Eu3+ synthesized by a simple co-precipitation technique. Furthermore, we also prognosticate that this material could be useful for gas sensing applications at room temperature. Nanostructures formulation by this method resulted in the formation of orthorhombic crystal structure with primitive lattice having space group Pnma. The material characterizations are performed using X-ray diffraction (XRD, energy dispersive X-ray analysis (EDX, thermo-gravimetric analysis/differential thermal analysis (TGA/DTA and transmission electron microscope (TEM. The calculated crystallite sizes are ~ 2-5 nm and are in well accordance with the HRTEM results. EDX result confirms the presence and homogeneous distribution of Gd and Eu throughout the nanoparticle. The prepared nanoparticles exhibit strong paramagnetic nature with paramagnetic term, susceptibility c = 8.2 ´ 10-5 emg/g Gauss. TGA/DTA analysis shows 27 % weight loss with rise in temperature. The gas sensing capability of the prepared Gd2S3:Eu3+ magnetic nanoparticles are investigated using the amperometric method. These nanoparticles show good I-V characteristics with ideal semiconducting nature at room temperature with and without ammonia dose. The observed room temperature sensitivity with increasing dose of ammonia indicates applicability of Gd2S3 nanoparticles as room temperature ammonia sensors.

  14. Preparation and investigation of structural properties of magnetic diatomite nanocomposites formed with different iron content

    Energy Technology Data Exchange (ETDEWEB)

    Yusan, Sabriye, E-mail: sabriye.doyurum@ege.edu.tr [Ege University, Institute of Nuclear Sciences, 35100 Bornova, Izmir (Turkey); Korzhynbayeva, Kuralay [Al-Farabi Kazakh National University, Faculty of Chemistry and Chemical Technology, 050040 Almaty (Kazakhstan); Aytas, Sule [Ege University, Institute of Nuclear Sciences, 35100 Bornova, Izmir (Turkey); Tazhibayeva, Sagdat; Musabekov, Kuanyshbek [Al-Farabi Kazakh National University, Faculty of Chemistry and Chemical Technology, 050040 Almaty (Kazakhstan)

    2014-09-01

    Highlights: • Magnetic diatomite nanocomposites were generated by partial reduction co-precipitation method. • VSM results showed that nanocomposites have superparamagnetic behaviour. • The nanocomposites were also characterized by XRD, FTIR, SEM, DTA/TGA and BET. - Abstract: Magnetic diatomite nanocomposites (MDNC) were synthesized successfully by partial reduction co-precipitation method from iron salt solution at different concentrations and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal analyses (DTA/TGA), vibrating sample magnetometry (VSM) and surface area measurements (BET). The XRD pattern of magnetic diatomite nanocomposites is face centered cubic with an average diameter of 4.67, 4.11 and 4. 82 nm as MDNC-1, MDNC-2 and MDNC-3, respectively. The saturation magnetization values for magnetic diatomite composites (diatomite/Fe ratio 1:1.5, 1:2.0 and 1:3.0) were found to be 13.81, 13.37 and 16.42 emu/g, respectively. By FT-IR spectra it was found that the main features of the silica framework were maintained after magnetite incorporation and some peak intensities were increased with magnetite loading. The cell parameter increase and the surface area decrease with increase in Fe content, observed by N{sub 2} adsorption–desorption technique, were considered as evidence of metal concentration effect in the synthesis procedure.

  15. Idiopathic Pulmonary Fibrosis: Data-driven Textural Analysis of Extent of Fibrosis at Baseline and 15-Month Follow-up.

    Science.gov (United States)

    Humphries, Stephen M; Yagihashi, Kunihiro; Huckleberry, Jason; Rho, Byung-Hak; Schroeder, Joyce D; Strand, Matthew; Schwarz, Marvin I; Flaherty, Kevin R; Kazerooni, Ella A; van Beek, Edwin J R; Lynch, David A

    2017-10-01

    Purpose To evaluate associations between pulmonary function and both quantitative analysis and visual assessment of thin-section computed tomography (CT) images at baseline and at 15-month follow-up in subjects with idiopathic pulmonary fibrosis (IPF). Materials and Methods This retrospective analysis of preexisting anonymized data, collected prospectively between 2007 and 2013 in a HIPAA-compliant study, was exempt from additional institutional review board approval. The extent of lung fibrosis at baseline inspiratory chest CT in 280 subjects enrolled in the IPF Network was evaluated. Visual analysis was performed by using a semiquantitative scoring system. Computer-based quantitative analysis included CT histogram-based measurements and a data-driven textural analysis (DTA). Follow-up CT images in 72 of these subjects were also analyzed. Univariate comparisons were performed by using Spearman rank correlation. Multivariate and longitudinal analyses were performed by using a linear mixed model approach, in which models were compared by using asymptotic χ 2 tests. Results At baseline, all CT-derived measures showed moderate significant correlation (P pulmonary function. At follow-up CT, changes in DTA scores showed significant correlation with changes in both forced vital capacity percentage predicted (ρ = -0.41, P pulmonary function (P fibrosis at CT yields an index of severity that correlates with visual assessment and functional change in subjects with IPF. © RSNA, 2017.

  16. Selective dehydration of bio-ethanol to ethylene catalyzed by lanthanum-phosphorous-modified HZSM-5: influence of the fusel.

    Science.gov (United States)

    Hu, Yaochi; Zhan, Nina; Dou, Chang; Huang, He; Han, Yuwang; Yu, Dinghua; Hu, Yi

    2010-11-01

    Bio-ethanol dehydration to ethylene is an attractive alternative to oil-based ethylene. The influence of fusel, main byproducts in the fermentation process of bio-ethanol production, on the bio-ethanol dehydration should not be ignored. We studied the catalytic dehydration of bio-ethanol to ethylene over parent and modified HZSM-5 at 250°C, with weight hourly space velocity (WHSV) equal to 2.0/h. The influences of a series of fusel, such as isopropanol, isobutanol and isopentanol, on the ethanol dehydration over the catalysts were investigated. The 0.5%La-2%PHZSM-5 catalyst exhibited higher ethanol conversion (100%), ethylene selectivity (99%), and especially enhanced stability (more than 70 h) than the parent and other modified HZSM-5. We demonstrated that the introduction of lanthanum and phosphorous to HZSM-5 could weaken the negative influence of fusel on the formation of ethylene. The physicochemical properties of the catalysts were characterized by ammonia temperature-programmed desorption (NH(3)-TPD), nitrogen adsorption and thermogravimetry (TG)/differential thermogravimetry (DTG)/differential thermal analysis (DTA) (TG/DTG/DTA) techniques. The results indicated that the introduction of lanthanum and phosphorous to HZSM-5 could inhibit the formation of coking during the ethanol dehydration to ethylene in the presence of fusel. The development of an efficient catalyst is one of the key technologies for the industrialization of bio-ethylene.

  17. Conditional reduction of adult born doublecortin-positive neurons reversibly impairs selective behaviours

    Directory of Open Access Journals (Sweden)

    Lillian eGarrett

    2015-11-01

    Full Text Available Adult neurogenesis occurs in the adult mammalian subventricular zone (SVZ along the walls of the lateral ventricles and the subgranular zone (SGZ of the hippocampal dentate gyrus. While a burgeoning body of research implicates adult neurogenesis in olfactory bulb (OB - and hippocampal-related behaviors, the precise function continues to elude. To further assess the behavioral importance of adult neurogenesis, we herein generated a novel inducible transgenic mouse model of adult neurogenesis reduction where mice with CreERT2 under doublecortin (DCX promoter control were crossed with mice where diphtheria toxin A (DTA was driven by the Rosa26 promoter. Activation of DTA, through the administration of tamoxifen (TAM, results in a specific reduction of DCX+ immature neurons in both the hippocampal dentate gyrus and OB. We show that the decrease of DCX+ cells causes impaired social discrimination ability in both young adult (from 3 months and middle (from 10 months aged mice. Furthermore, these animals showed an age-independent altered coping behavior in the Forced Swim Test without clear changes in anxiety-related behavior. Notably, these behavior changes were reversible on repopulating the neurogenic zones with DCX+ cells on cessation of the tamoxifen treatment, demonstrating the specificity of this effect. Overall, these results support the notion that adult neurogenesis plays a role in social memory and in stress coping but not necessarily in anxiety-related behavior.

  18. The effect of some wood preservatives on the thermal degradation of Scots pine

    Energy Technology Data Exchange (ETDEWEB)

    Tomak, Eylem D., E-mail: eylemdizman@yahoo.com [Karadeniz Technical University, Faculty of Forestry, Forest Industrial Engineering Department, 61080 Trabzon (Turkey); Baysal, Ergun, E-mail: bergun@mu.edu.tr [Mugla University, Faculty of Technology, Department of Wood Science and Technology, Kotekli, 48000 Mugla (Turkey); Peker, Huseyin, E-mail: peker100@hotmail.com [Artvin Coruh University, Faculty of Forestry, Forest Industrial Engineering Department, 06100 Artvin (Turkey)

    2012-11-10

    Highlights: Black-Right-Pointing-Pointer Scots pine samples were impregnated with 10 commercial wood preservatives. Black-Right-Pointing-Pointer Thermal degradation of wood was evaluated by TG, DTG and DTA. Black-Right-Pointing-Pointer The thermal behavior of treated wood differed from that of untreated wood. Black-Right-Pointing-Pointer Boron containing wood preservatives yielded more charcoal than other preservatives. Black-Right-Pointing-Pointer Boric oxide and metal compounds in the formulations may affect char weight. - Abstract: Wood has been a structural material for many years; however, its ability to burn has limited its use in some applications. This study aims to evaluate the effect of commercial wood preservatives having concentration of 4% on the thermal behavior of Scots pine wood, and compare the fire retardant effectiveness of these preservatives with that of boron compounds. Thermal degradation of treated and untreated wood samples was evaluated by thermogravimetry (TG), differential thermogravimetry (DTG) and differential thermal analysis (DTA). Thermal behavior of treated wood differed from thermal behavior of untreated wood in terms of a high char yield. Results showed that weight loss of wood reduced while char yield increased in the charring phase of the pyrolysis in the boron containing preservative treated wood accompanying with pyrolysis temperature lowered. The highest char yield was obtained from the samples treated with disodium octaborate tetrahydrate in the all treated groups.

  19. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification

    Energy Technology Data Exchange (ETDEWEB)

    Lamouri, S.; Hamidouche, M.; Bouaouadja, N.; Belhouchet, H.; Garnier, V.; Fantozzi, G.; Trelkat, J.F.

    2017-07-01

    In this work, we studied the aptitude to sintering green bodies using γ-Al2O3 transition alumina as raw powder. We focused on the influence of the heating rate on densification and microstructural evolution. Phase transformations from transition alumina γ→δ→θ→α-Al2O3 were studied by in situ X-rays diffraction from the ambient to 1200°C. XRD patterns revealed coexistence of various phase transformations during the heating cycle. DTA and dilatometry results showed that low heating rate leads to a significant reduction of the temperature of the α-Al2O3 alumina formation. Around 1190, 1217 and 1240°C were found when using 5, 10 and 20°C/min of heating rate, respectively. The activation energy for θ-Al2O3→α-Al2O3 transformation calculated by Kissinger and JMA equations using dilatometry method were 464.29 and 488.79kJ/mol, respectively and by DTA method were 450.72 and 475.49kJ/mol, respectively. In addition, the sintering of the green bodies with low heating rate promotes the rearrangement of the grains during θ-Al2O3→α-Al2O3 transformation, enhancing the relative density to 95% and preventing the development of a vermicular structure. (Author)

  20. Spectral characterization of mechanically synthesized MoO3-CuO nanocomposite

    Science.gov (United States)

    Sundeep, Dola; Gopala Krishna, A.; Ravikumar, R. V. S. S. N.; Vijaya Kumar, T.; Daniel Ephraim, S.; Pavan, Y. L.

    2016-01-01

    In this work, MoO3-CuO metal oxide composite nanopowders are prepared by simple mechanochemical assisted synthesis technique with the stoichiometric weight ratios of MoO3 and CuO as 2.3:1 and 3.3:1, respectively. The structural and spectroscopic properties of the as-synthesised samples are characterised by XRD, SEM with EDS, FT-IR, Raman spectroscopy and TGA/DTA. X-ray diffraction pattern demonstrates the peaks correspond to orthorhombic phase of α-MoO3 and monoclinic phase of β-CuO. The average crystalline sizes of the 2.3:1 and 3.3:1 samples were found to be 16 and 24 nm, respectively, which are supported by Williamson-Hall (W-H) calculations. The correlations between the milling rotational speeds with morphological characteristics are revealed by the SEM images. The fundamental modes of Mo=O and Cu-O were analysed by FT-IR. Raman analysis has provided the qualitative information about the structure of the mixed oxide composite. Thermogravimetry analysis and Differential Thermal Analysis (DTA) of MoO3-CuO have revealed that the dual phase mixed oxide composite is stable up to 709 °C with a negligible weight loss. Based on the above, it can be inferred that the synthesised mixed lubricous oxide nanocomposite could be used as a solid lubricant at elevated temperatures.

  1. Preparation, characterization and thermal behaviour study of 4-dimethyl amino benzal pyruvate of lanthanides (III) and yttrium (III) in solid state

    International Nuclear Information System (INIS)

    Miyano, M.H.

    1990-01-01

    Solid state compounds involving Ln and DMBP, where Ln trivalent lanthanides (except promethium) and yttrium; DMBP 4-dimethyl amino benzylidene pyruvate, were prepared by addition of ligand to the corresponding metal ions chlorides, both in aqueous solution. The precipitates were washed with distilled water and dried at 40 0 C in a forced circulation oven. Complexometry with EDTA, thermogravimetry (TG), differential thermal analysis (DTA), infra-red absorption and X-ray diffraction have been used in the study of these compounds. (author)

  2. Modeling of collisional excited x-ray lasers using short pulse laser pumping

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Akira; Moribayashi, Kengo; Utsumi, Takayuki; Tajima, Toshiki [Japan Atomic Energy Research Inst., Neyagawa, Osaka (Japan). Kansai Research Establishment

    1998-03-01

    A simple atomic kinetics model of electron collisional excited x-ray lasers has been developed. The model consists of a collisional radiative model using the average ion model (AIM) and a detailed term accounting (DTA) model of Ni-like Ta. An estimate of plasma condition to produce gain in Ni-like Ta ({lambda}=44A) is given. Use of the plasma confined in a cylinder is proposed to preform a uniform high density plasma from 1-D hydrodynamics calculations. (author)

  3. Thermal property of holmium doped lithium lead borate glasses

    Science.gov (United States)

    Usharani, V. L.; Eraiah, B.

    2018-04-01

    The new glass system of holmium doped lithium lead borate glasses were prepared by conventional melt quenching technique. The thermal stability of the different compositions of Ho3+ ions doped lithium lead borate glasses were studied by using TG-DTA. The Tg values are ranging from 439 to 444 °C with respect to the holmium concentration. Physical parameters like polaron radius(rp), inter-nuclear distance (ri), field strength (F) and polarizability (αm) of oxide ions were calculated using appropriate formulae.

  4. Phase formation in Na2MoO4 - MgMoO4 - Cr2(MoO4)3 system

    International Nuclear Information System (INIS)

    Kotova, I.Yu.; Kozhevnikova, N.M.

    1998-01-01

    Interaction within Na 2 MoO 4 - MgMoO 4 - Cr 2 (MoO 4 ) 3 ternary system is studied by X ray phase and DTA methods. State diagram of NaCr(MoO 4 ) 2 - MgMoO 4 section is plotted. Production of ternary molybdates of Na 1-x Mg 1-x Cr 1+x (MoO 4 ) 3 , where 0 ≤ x ≤ 0.3, and NaMg 3 Cr(MoO 4 ) 5 composition is ascertained [ru

  5. Synthesis, structure and magnetic properties of CoFe_2O_4 nanomaterial by coprecipitation method

    International Nuclear Information System (INIS)

    Nguyen Anh Tien; Hoang Thi Tuyet

    2015-01-01

    CoFe_2O_4 spinel nanomaterial has been synthesized by coprecipitation method through the hydrolysis of Co(II) and Fe(III) cations in boiling water. The results of DTA/TGA/DrTGA, XRD, TEM methods showed that CoFe_2O_4 crystals formed after a calcination at 700 °C exhibited structure of cubic with the particles size of 30-50 nm, H_c = 1526.89 Oe, M_s = 41.703 emu/g, M_r = 19.545 emu/g. (author)

  6. Recomendación sobre la vacuna contra la tosferina para los bebés y niños pequeños (Whooping Cough Vaccine Recommendation for Babies and Young Children)

    Centers for Disease Control (CDC) Podcasts

    2015-04-13

    Este podcast proporciona información acerca de la tosferina y la recomendación de que todos los niños reciban la vacuna DTaP según el calendario recomendado por los CDC para ayudar a protegerlos contra esta grave enfermedad.  Created: 4/13/2015 by National Center for Immunization and Respiratory Diseases (NCIRD), Division of Bacterial Diseases (DBD), Meningitis and Vaccine Preventable Diseases Branch (MVPDB).   Date Released: 4/13/2015.

  7. Preparation, characterization and luminescence of Sm~(3+) or Eu~(3+) doped Sr_2CeO_4 by a modified sol-gel method

    Institute of Scientific and Technical Information of China (English)

    张春祥; 史建设; 杨绪杰; 陆路德; 汪信

    2010-01-01

    Superfine Sr2CeO4:RE3+ (RE=Eu, Sm) phosphors were synthesized at relatively low temperature by a modified sol-gel method using nitrates as raw materials, ethylenediaminetetraacetic acid (EDTA) as complexing agent. Single phase phosphors could be obtained at calcination temperature above 800 °C and pH value higher than 6.4 of initial solution. The as-prepared powders consisted of uniform crotch-like grains. The preparation process was monitored by thermogravimetric and differential thermal analysis (TG-DTA) ...

  8. Model-fitting approach to kinetic analysis of non-isothermal oxidation of molybdenite

    International Nuclear Information System (INIS)

    Ebrahimi Kahrizsangi, R.; Abbasi, M. H.; Saidi, A.

    2007-01-01

    The kinetics of molybdenite oxidation was studied by non-isothermal TGA-DTA with heating rate 5 d eg C .min -1 . The model-fitting kinetic approach applied to TGA data. The Coats-Redfern method used of model fitting. The popular model-fitting gives excellent fit non-isothermal data in chemically controlled regime. The apparent activation energy was determined to be about 34.2 kcalmol -1 With pre-exponential factor about 10 8 sec -1 for extent of reaction less than 0.5

  9. Phase diagram of Pr-P system

    International Nuclear Information System (INIS)

    Mironov, K.E.

    1981-01-01

    An area of the Pr-P system, adjoining to the Pr ordinate, is plotted up by the DTA method. Presence of P solid solution in Pr is established. Data on thermal stability of PrP, PrP 2 , PrP 5 and PrP 7 are generalized. The diagram of phase transformations in Pr-P system is plotted up proceeding from the whole complex of the data, presented. A supposition is made on a possible formation of solid solutions between the highest polyphosphide and phosphorus [ru

  10. Modification of Nafion Membranes by IL-Cation Exchange: Chemical Surface, Electrical and Interfacial Study

    Directory of Open Access Journals (Sweden)

    V. Romero

    2012-01-01

    A study of time evolution of the impedance curves measured in the system “IL aqueous solution/Nafion-112 membrane/IL aqueous solution” was also performed. This study allows us monitoring the electrical changes associated to the IL-cation incorporation in both the membrane and the membrane/IL solution interface, and it provides supplementary information on the characteristic of the Nafion/DTA+ hybrid material. Moreover, the results also show the significant effect of water on the electrical resistance of the Nafion-112/IL-cation-modified membrane.

  11. Preparation and characterization of exfoliated polyaniline/montmorillonite nanocomposites

    International Nuclear Information System (INIS)

    Narayanan, Binitha N.; Koodathil, Ranjana; Gangadharan, Tripti; Yaakob, Zahira; Saidu, Femina K.; Chandralayam, Soumini

    2010-01-01

    Transition metal ions were exchanged with the interlamellar cations of montmorillonite clays and polymerization of aniline was done within the layers. The delaminated clay layers upon ion exchange resulted in exfoliated polyaniline/clay nanocomposite formation which has profound effects on polymer structure, properties and electrical conduction mechanisms. Here we offer polyaniline (PANI)/montmorillonite exfoliated nanocomposite synthesized through a simple, cheap route which need not require complicated and less economical organophilic modification. The prepared composites were characterized using XRD, FTIR, and TG/DTA to prove exfoliation.

  12. Preparation and characterization of exfoliated polyaniline/montmorillonite nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Binitha N., E-mail: binithann@yahoo.co.i [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India); Department of Chemical and Process Engineering, Faculty of Engineering, National University of Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Koodathil, Ranjana; Gangadharan, Tripti [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India); Yaakob, Zahira [Department of Chemical and Process Engineering, Faculty of Engineering, National University of Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Saidu, Femina K.; Chandralayam, Soumini [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India)

    2010-04-15

    Transition metal ions were exchanged with the interlamellar cations of montmorillonite clays and polymerization of aniline was done within the layers. The delaminated clay layers upon ion exchange resulted in exfoliated polyaniline/clay nanocomposite formation which has profound effects on polymer structure, properties and electrical conduction mechanisms. Here we offer polyaniline (PANI)/montmorillonite exfoliated nanocomposite synthesized through a simple, cheap route which need not require complicated and less economical organophilic modification. The prepared composites were characterized using XRD, FTIR, and TG/DTA to prove exfoliation.

  13. Plasma-aided surface technology for modification of materials referred to fire protection

    International Nuclear Information System (INIS)

    Dineff, P.; Gospodinova, D.; Kostova, L.; Vladkova, T.; Chen, E.

    2008-01-01

    There has been considerable interest in dielectric barrier air discharge at atmospheric pressure and room temperature over the past decade due to the increased number of industrial applications. New plasma-aided capillary impregnation technology for flame spreading stop and fire protection of porous materials was developed. Research, based on thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimetry (DSC), proves that plasma-chemical surface pre-treatment exert material change on chemical interaction between phosphorus containing flame retardant and wood matrix (Pinus sylvestris, Bulgaria; Pseudotsuga, Canada)

  14. Metallography and thermal analysis of ceramic nuclear fuels

    International Nuclear Information System (INIS)

    Tebaldi, V.

    1988-01-01

    The book contains two parts: the ceramography laboratory and the thermal treatment laboratory. After general remarks on sintering the first part includes sample preparation for ceramography (grinding, polishing, etching), microscopic examination and quantitative image analysis. The second part deals with temperature measurement, oxide/metal ratio determination, thermogravimetry, differential thermal analysis (DTA), melting point determination and constitution of phase diagrams. Installation of a Pu laboratory, sample decontamination, and research with a microprobe are described. 188 photomicrographs present the microstructure of ceramics based on U, Pu and higher actinides

  15. Mutual Influence of Special Components in Baotou Steel Blast Furnace Slag on the Crystallization Behavior of Glass

    OpenAIRE

    Wang, Yici; Jiang, Qi; Luo, Guoping; Yu, Wenwu; Ban, Yan

    2012-01-01

    In the process of glass-ceramics prepared with Baotou steel blast furnace slag, quartz sand, and other raw materials by melting method, the mutual influence of the special components such as CaF2, REXOY, TiO2, K2O, and Na2O in the blast furnace slag on the crystallization behavior of parent glass was investigated using differential thermal analysis (DTA) and X-ray diffraction (XRD). The results show that the special components in slag can reduce the crystallization temperature and promote cry...

  16. Obtaining ZnO nanocrystalline through methods of combustion and precipitation

    International Nuclear Information System (INIS)

    Garcia, A.P.; Guaglianoni, W.C.; Cunha, M.A.; Basegio, T.M.; Bergmann, C.P.

    2012-01-01

    Zinc oxide is important technological applications in rubber and industrial paints. The chemical properties and microstructure of ZnO powder depends on the synthesis method employed. In this work, it was obtained nanosized ZnO using different synthesis processes, such as solution combustion and precipitation, varying the concentrations of reactants and the working temperature. The obtained powders were characterized by SEM, BET, XRD, crystallite size determination and thermal analysis (TGA and DTA). It was possible to obtain nanosized ZnO with the methods used. (author)

  17. Synthesis, fluorescence properties of Tb(Ⅲ) complexes with novel mono-substituted β-diketone ligands

    Institute of Scientific and Technical Information of China (English)

    罗一鸣; 李石凤; 李军; 陈学娟; 唐瑞仁

    2010-01-01

    Two novel pyridine-2,6-dicarboxylic acid derivatives of mono-β-diketone named methyl 6-biphenylacetyl-2-pyridinecarboxylate (MBP) and 6-biphenylacetyl-2-pyridinecarboxylic acid (BAA) and their corresponding binary complexes Tb(MBP)3.6H2O and Tb(BAA)3·6H2O were synthesized. The ligands were characterized by elemental analysis, FT-IR and 1H-NMR, and the complexes were characterized with elemental analysis, FT-IR, 1H-NMR and thermogravimetric and differential thermal analysis(TG-DTA). The investigation of fluo...

  18. Preparation of Nd-doped gadolinium-gallium garnet laser ceramic powder by sol-gel method

    Institute of Scientific and Technical Information of China (English)

    YAO Yan-ping; LIU Jing-he

    2006-01-01

    Preparation of Nd3+:Gd3Ga5O12 polycrystalline material by sol-gel method was preparated in this paper.The structure and the pattern of the sample were analyzed by thermogravimetric analysis and differential thermal analysis(TG-DTA),Infrared spectrum,XRD,TEM and electron spectrum,which indicated that the powder with good characteristics of 70-100 nm can be obtained by sintering at 1 000℃.It was shown that the chemical composition of the sample was agreed with experimental requirements by electron spectrum analysis.

  19. Projection of the Liquidus Surface of the Co - Sn - Bi System

    Science.gov (United States)

    Abilov, Ch. I.; Allazov, M. R.; Sadygova, S. G.

    2016-11-01

    The crystallization behavior of phases in alloys of the Co - Sn - Bi system is studied by the methods of differential thermal (DTA), x-ray phase (XRP) and x-ray diffraction (XRD) analyses and hardness measurement. The projection of the liquidus surface is plotted. The boundaries of layering, the development of the monovariant processes, and the coordinates of the nonvariant equilibrium compositions are determined. Compositions of (Co3Sn2)1 - x Bi x solid solutions suitable for the production of antifriction materials are suggested.

  20. Mineralogical and Thermal Properties of Poly(methyl methacrylate) Alite Composite

    International Nuclear Information System (INIS)

    Ismail, M.R.; El-Fass, M.M.; Abd-El-Rahman, H.A.; El-Miligy, A.A.

    1999-01-01

    The X-ray diffraction (XRD) characteristics and thermal stability of PMMA alite composite have been studied. The dried alite samples were impregnated by methyl methacrylate monomer and then subjected to gamma irradiation. The mineralogical and thermal properties of the PMMA alite composite materials were investigated by using XRD, DTA, and TGA techniques. The results indicate that, a markedly reduction of the peaks intensities of XRD for tricalcium silicate and calcium hydroxide. TGA data showed that PMMA alite composite has a high thermal stability as compared to PMMA

  1. Improving UXO Detection and Discrimination in Magnetic Environments

    Science.gov (United States)

    2010-05-01

    disks were used for 82 all analyses using a Bruker AXS S-4 Pioneer, a 4 kW, wavelength dispersive instrument. XRF element analyses were determined by...event at around 500°C is possibly caused by loss of structural water from kaolin and/or mica type clay minerals. Between about 600 and 1400°C the TGA...Loss of structural water from Kaolin or Micas1 510 Endothermic TGA, DTA Decomposition of böhmite (γ-AlO·OH)1 Loss of structural water from

  2. Preferred Reporting Items for a Systematic Review and Meta-analysis of Diagnostic Test Accuracy Studies: The PRISMA-DTA Statement.

    Science.gov (United States)

    McInnes, Matthew D F; Moher, David; Thombs, Brett D; McGrath, Trevor A; Bossuyt, Patrick M; Clifford, Tammy; Cohen, Jérémie F; Deeks, Jonathan J; Gatsonis, Constantine; Hooft, Lotty; Hunt, Harriet A; Hyde, Christopher J; Korevaar, Daniël A; Leeflang, Mariska M G; Macaskill, Petra; Reitsma, Johannes B; Rodin, Rachel; Rutjes, Anne W S; Salameh, Jean-Paul; Stevens, Adrienne; Takwoingi, Yemisi; Tonelli, Marcello; Weeks, Laura; Whiting, Penny; Willis, Brian H

    2018-01-23

    Systematic reviews of diagnostic test accuracy synthesize data from primary diagnostic studies that have evaluated the accuracy of 1 or more index tests against a reference standard, provide estimates of test performance, allow comparisons of the accuracy of different tests, and facilitate the identification of sources of variability in test accuracy. To develop the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) diagnostic test accuracy guideline as a stand-alone extension of the PRISMA statement. Modifications to the PRISMA statement reflect the specific requirements for reporting of systematic reviews and meta-analyses of diagnostic test accuracy studies and the abstracts for these reviews. Established standards from the Enhancing the Quality and Transparency of Health Research (EQUATOR) Network were followed for the development of the guideline. The original PRISMA statement was used as a framework on which to modify and add items. A group of 24 multidisciplinary experts used a systematic review of articles on existing reporting guidelines and methods, a 3-round Delphi process, a consensus meeting, pilot testing, and iterative refinement to develop the PRISMA diagnostic test accuracy guideline. The final version of the PRISMA diagnostic test accuracy guideline checklist was approved by the group. The systematic review (produced 64 items) and the Delphi process (provided feedback on 7 proposed items; 1 item was later split into 2 items) identified 71 potentially relevant items for consideration. The Delphi process reduced these to 60 items that were discussed at the consensus meeting. Following the meeting, pilot testing and iterative feedback were used to generate the 27-item PRISMA diagnostic test accuracy checklist. To reflect specific or optimal contemporary systematic review methods for diagnostic test accuracy, 8 of the 27 original PRISMA items were left unchanged, 17 were modified, 2 were added, and 2 were omitted. The 27-item PRISMA diagnostic test accuracy checklist provides specific guidance for reporting of systematic reviews. The PRISMA diagnostic test accuracy guideline can facilitate the transparent reporting of reviews, and may assist in the evaluation of validity and applicability, enhance replicability of reviews, and make the results from systematic reviews of diagnostic test accuracy studies more useful.

  3. Advanced aircraft service life monitoring method via flight-by-flight load spectra

    Science.gov (United States)

    Lee, Hongchul

    This research is an effort to understand current method and to propose an advanced method for Damage Tolerance Analysis (DTA) for the purpose of monitoring the aircraft service life. As one of tasks in the DTA, the current indirect Individual Aircraft Tracking (IAT) method for the F-16C/D Block 32 does not properly represent changes in flight usage severity affecting structural fatigue life. Therefore, an advanced aircraft service life monitoring method based on flight-by-flight load spectra is proposed and recommended for IAT program to track consumed fatigue life as an alternative to the current method which is based on the crack severity index (CSI) value. Damage Tolerance is one of aircraft design philosophies to ensure that aging aircrafts satisfy structural reliability in terms of fatigue failures throughout their service periods. IAT program, one of the most important tasks of DTA, is able to track potential structural crack growth at critical areas in the major airframe structural components of individual aircraft. The F-16C/D aircraft is equipped with a flight data recorder to monitor flight usage and provide the data to support structural load analysis. However, limited memory of flight data recorder allows user to monitor individual aircraft fatigue usage in terms of only the vertical inertia (NzW) data for calculating Crack Severity Index (CSI) value which defines the relative maneuver severity. Current IAT method for the F-16C/D Block 32 based on CSI value calculated from NzW is shown to be not accurate enough to monitor individual aircraft fatigue usage due to several problems. The proposed advanced aircraft service life monitoring method based on flight-by-flight load spectra is recommended as an improved method for the F-16C/D Block 32 aircraft. Flight-by-flight load spectra was generated from downloaded Crash Survival Flight Data Recorder (CSFDR) data by calculating loads for each time hack in selected flight data utilizing loads equations. From

  4. Synthesis, spectroscopic analysis and electrochemical performance of modified β-nickel hydroxide electrode with CuO

    Directory of Open Access Journals (Sweden)

    B. Shruthi

    2017-03-01

    Full Text Available In the present work, a modified β-nickel hydroxide (β-Ni(OH2 electrode material with CuO has been prepared using a co-precipitation method. The structure and property of the modified β-Ni(OH2 with CuO were characterized by X-ray diffraction (XRD, Fourier Transform infra-red (FT-IR, Raman and thermal gravimetric-differential thermal analysis (TG-DTA techniques. The results of the FT-IR spectroscopy and TG-DTA indicate that the modified β-Ni(OH2 electrode materials contain intercalated water molecules and anions. A pasted–type electrode was prepared using nickel hydroxide powder as the main active material on a nickel sheet as a current collector. Cyclic voltammetry (CV and Electrochemical impedance spectroscopy (EIS studies were undertaken to assess the electrochemical behavior of pure β-Ni(OH2 and modified β-Ni(OH2 electrode with CuO in a 6 M KOH electrolyte. The addition of CuO into β-nickel hydroxide was found to enhance the reversibility of the electrode reaction and also increase the separation of the oxidation current peak of the active material from the oxygen evolution current. The modified nickel hydroxide with CuO was also found to exhibit a higher proton diffusion coefficient and a lower charge transfer resistance. These findings suggest that the modified β-Ni(OH2 with CuO possesses an enhanced electrochemical response and thus can be recognized as a promising candidate for battery electrode applications.

  5. Rancang Bangun Platform Sistem SFN TV Digital DVB-T2

    Directory of Open Access Journals (Sweden)

    Rakhmat Oktariza

    2015-12-01

    Full Text Available Menyambut implementasi penuh standar penyiaran TV digital DVB-T2 di Indonesia, pemahaman konsep dan realisasi terkait skema alokasi frekuensi dan susunan pemancar-penerima amat diperlukan untuk dapat melakukan perencanaan jaringan yang matang. Adanya suatu platform untuk implementasi, pengukuran dan analisis kinerja sistem DVB-T2 akan sangat membantu hal tersebut. Tugas Akhir ini bertujuan merancang platform sistem Single Frequency Network (SFN untuk implementasi, pengukuran dan analisis pada aplikasi TV digital berstandar DVB-T2. Rancangan platform untuk pengukuran terdiri atas sebuah PC berisi card DekTec DTA-2131 dan antena UHF sebagai unit penerima, sedangkan dua buah PC berisi card DekTec DTA-2111 sebagai unit pemancar dan sebuah RF channel simulator ditambahkan untuk memungkinkan implementasi dan pengujian SFN secara mandiri dalam skala laboratorium. Pengukuran lapangan melalui drive test dilakukan dengan unit penerima sebagai evaluasi terhadap jaringan penyiaran TV digital di wilayah Gerbang Kertasusila. Hasil yang diperoleh kemudian digunakan dalam simulasi untuk menentukan rekomendasi skenario pengimplementasian SFN di wilayah tersebut, terutama dalam kaitannya dengan faktor Power Imbalance (PI antara dua atau lebih pemancar. Platform yang dirancang sudah mampu diaplikasikan untuk pengukuran dan evaluasi jaringan penyiaran existing. Sementara hasil pengukuran dari 8 test point memberikan rata-rata level RF sebesar -67,70 dBm dan CNR sebesar 20,40 dB untuk wilayah Gerbang Kertasusila. Skenario pasangan pemancar yang direkomendasikan dari hasil simulasi adalah Tx1-2 untuk SFN-SISO dan Tx2-3 untuk SFN-MISO.

  6. Vibrational spectra, powder X-ray diffractions and physical properties of cyanide complexes with 1-ethylimidazole

    Science.gov (United States)

    Kürkçüoğlu, Güneş Süheyla; Kiraz, Fulya Çetinkaya; Sayın, Elvan

    2015-10-01

    The heteronuclear tetracyanonickelate(II) complexes of the type [M(etim)Ni(CN)4]n (hereafter, abbreviated as M-Ni-etim, M = Mn(II), Fe(II) or Co(II); etim = 1-ethylimidazole, C5H8N2) were prepared in powder form and characterized by FT-IR and Raman spectroscopy, powder X-ray diffraction (PXRD), thermal (TG; DTG and DTA), and elemental analysis techniques. The structures of these complexes were elucidated using vibrational spectra and powder X-ray diffraction patterns with the peak assignment to provide a better understanding of the structures. It is shown that the spectra are consistent with a proposed crystal structure for these compounds derived from powder X-ray diffraction measurements. Vibrational spectra of the complexes were presented and discussed with respect to the internal modes of both the etim and the cyanide ligands. The C, H and N analyses were carried out for all the complexes. Thermal behaviors of these complexes were followed using TG, DTG and DTA curves in the temperature range 30-700 °C in the static air atmosphere. The FT-IR, Raman spectra, thermal and powder X-ray analyses revealed no significant differences between the single crystal and powder forms. Additionally, electrical and magnetic properties of the complexes were investigated. The FT-IR and Raman spectroscopy, PXRD, thermal and elemental analyses results propose that these complexes are similar in structure to the Hofmann-type complexes.

  7. Development of a freeze-stable formulation for vaccines containing aluminum salt adjuvants.

    Science.gov (United States)

    Braun, LaToya Jones; Tyagi, Anil; Perkins, Shalimar; Carpenter, John; Sylvester, David; Guy, Mark; Kristensen, Debra; Chen, Dexiang

    2009-01-01

    Vaccines containing aluminum salt adjuvants are prone to inactivation following exposure to freeze-thaw stress. Many are also prone to inactivation by heat. Thus, for maximum potency, these vaccines must be maintained at temperatures between 2 degrees C and 8 degrees C which requires the use of the cold chain. Nevertheless, the cold chain is not infallible. Vaccines are subject to freezing during both transport and storage, and frozen vaccines are discarded (under the best circumstances) or inadvertently administered despite potentially reduced potency. Here we describe an approach to minimize our reliance on the proper implementation of the cold chain to protect vaccines from freeze-thaw inactivation. By including PEG 300, propylene glycol, or glycerol in a hepatitis B vaccine, particle agglomeration, changes in the fluorescence emission spectrum--indicative of antigen tertiary structural changes--and losses of in vitro and in vivo indicators of potency were prevented following multiple exposures to -20 degrees C. The effect of propylene glycol was examined in more detail and revealed that even at concentrations too low to prevent freezing at -10 degrees C, -20 degrees C, and -80 degrees C, damage to the vaccine could be prevented. A pilot study using two commercially available diphtheria, tetanus toxoid, and acellular pertussis (DTaP) vaccines suggested that the same stabilizers might protect these vaccines from freeze-thaw agglomeration as well. It remains to be determined if preventing agglomeration of DTaP vaccines preserves their antigenic activity following freeze-thaw events.

  8. Lattice parameters values and phase diagram for the Cu{sub 2}Zn{sub 1−z}Mn{sub z}GeSe{sub 4} alloy system

    Energy Technology Data Exchange (ETDEWEB)

    Caldera, D. [Centro de Estudios de Semiconductores, Departamento de Física, Facultad de Ciencias, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of); Quintero, M., E-mail: mquinter@ula.ve [Centro de Estudios de Semiconductores, Departamento de Física, Facultad de Ciencias, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of); Morocoima, M.; Moreno, E.; Quintero, E.; Grima-Gallardo, P.; Bocaranda, P. [Centro de Estudios de Semiconductores, Departamento de Física, Facultad de Ciencias, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of); Henao, J.A.; Macías, M.A. [Grupo de Investigación en Química Estructural (GIQUE), Facultad de Ciencias, Escuela de Química, Universidad Industrial de Santander, Apartado aéreo 678, Bucaramanga (Colombia); Briceño, J.M.; Mora, A.E. [Laboratorio de Análisis Químico y Estructura de Materiales, Departamento de Física, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of)

    2014-11-25

    Highlights: • The samples were annealed at 500 °C for 1 month. • Samples in the ranges 0 < z < 0.375 had the tetragonal stannite α structure (I4{sup ¯}2m). • For 0.725 < z ⩽ 1 the wurtz–stannite δ structure (Pmn2{sub 1}). • Undercooling effects occur for samples in the range 0.725 < z < 0.925. - Abstract: The T(z) phase diagram of the Cu{sub 2}Zn{sub 1−z}Mn{sub z}GeSe{sub 4} alloy system is obtained from X-ray diffraction and differential thermal analysis DTA. At room temperature, the X-ray diffraction data showed that samples in the ranges 0 < z < 0.375 had the tetragonal stannite α structure (I4{sup ¯}2m), while for 0.725 < z ⩽ 1 the wurtz–stannite δ structure (Pmn2{sub 1}). The α and δ fields are separated by a relative wide three-phase field (α + δ + MnSe{sub 2}). The DTA thermograms were used to construct the phase diagram of the Cu{sub 2}Zn{sub 1−z}Mn{sub z}GeSe{sub 4} alloy system. It was confirmed that the Cu{sub 2}ZnGeSe{sub 4} and Cu{sub 2}MnGeSe{sub 4} compounds melt incongruently. It was observed that undercooling effects occur for samples in the range 0.725 < z < 0.925.

  9. Crystallization behavior of Li2O-SiO2, Na2O-SiO2 and Na2O-CaO-SiO2 glasses; Li2O-SiO2, Na2O-SiO2, Na2O-CaO-SiO2 kei glass no kessho sekishutsu kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Tsutsumi, K.; Otake, J.; Nagasaka, T.; Hino, M. [Tohoku University, Sendai (Japan)

    1998-06-01

    It has been known that crystallization of mold powder is effective on the disturbance of heat transfer between mold and solidified shell in production of middle carbon steel slabs in continuous casting process. But it has not yet been made clear which composition of mold powder is the most suitable for crystallization. The crystallization behavior of Li2O-SiO2, Na2O-SiO2 and Na2O-CaO-SiO2 glasses was observed by differential thermal analysis (DTA) and hot-thermocouple methods with DTA in the present work. As a result, addition of alkaline metal and alkaline earth metal oxides to SiO2 increased the critical cooling rate for glass formation in binary system of Li2O-SiO2 and Na2O-SiO2 and Li2O-SiO2 system crystallized easier than Na2O-SiO2 system. In ternary system of Na2O-CaO-SiO2, addition of Na2O hurried the critical cooling rate at CaO/SiO2=0.93 mass ratio, but the rate was almost constant in the composition range of more than 15 mass% Na2O. The slag of CaO/SiO2=0.93 made the rate faster than the slag of CaO/SiO2=0.47 at constant content of 10mass% Na2O. 17 refs., 10 figs., 3 tabs.

  10. Studies on the mixed ligand complexes of copper(II involving a sulfa drug and some potentially bi or tridentate ligands under physiological conditions

    Directory of Open Access Journals (Sweden)

    S. Regupathy

    2014-12-01

    Full Text Available The stability constants of mixed ligand complexes formed in the Cu(II-sulfathiazole(stz(A-glycine(gly, dl-2-aminobutanoic acid(2aba, dl-3-aminobutanoic acid(3aba, 1,2-diaminopropane(dp, 1,3-diaminopropane(tp, dl-2,3-diaminopropanoic acid(dapa, dl-2,4-diaminobutanoic acid(daba, dl-2,5-diaminopentanoic acid(ornithine, orn(B systems have been determined pH-metrically at 37 °C and I = 0.15 mol dm−3 (NaClO4 using SCOGS program. Analysis of experimental data indicates the presence of CuABH, CuAB, CuAB2H2 or CuAB2 species. The Δlog K values demonstrate higher stabilities for the mixed ligand complexes compared to the binary analogues. The CuAB complexes with B = gly, 2aba, dapa & orn systems were isolated and characterized using micro analytical, magnetic moment, ESR, electrochemical studies, TG/DTA, power XRD and SEM analysis. Magnetic susceptibility and electronic spectral studies suggest square planar geometry for the CuAB complexes. The g values indicate that the unpaired electron lies in thedx2-y2 orbital. The TG/DTA studies reveal that the complexes are non hydrated and possesses high thermal stability. The powder XRD data suggest that the complex is microcrystalline. The antimicrobial activity and CT DNA cleavage studies of the complexes are also reported.

  11. Water concentration controlled hydrolysis and crystallization in n-octanol to TiO{sub 2} nanocrystals with size below 10 nm

    Energy Technology Data Exchange (ETDEWEB)

    Wang Meilan [School of Chemical and Biological Science and Engineering, Yantai University, Yantai 264005 (China); He Tao, E-mail: htzy79@yahoo.com.cn [School of Chemical and Biological Science and Engineering, Yantai University, Yantai 264005 (China); Pan Yanfei; Liao Weiping [School of Chemical and Biological Science and Engineering, Yantai University, Yantai 264005 (China); Zhang Shangzhou; Du Wei [School of Environment and Materials Engineering, Yantai University, Yantai 264005 (China)

    2011-11-01

    Highlights: {yields} Controlled hydrolysis of alkoxide was realized by adjusting water concentration. {yields} Carrying out hydrolysis under different water concentration gave hydrolyzed intermediate with different composition. {yields} A precise size control below 10 nm for anatase TiO{sub 2} nanocrystals was realized. - Abstract: Hydrolysis of tetrabutyl titanate (TBT) and crystallization from hydrolyzed intermediates were carried out in a simple ternary system including n-octanol, TBT and water. Anatase TiO{sub 2} nanocrystals (NCS) were prepared with precise size control below 10 nm. The hydrolysis rate at different water concentration (C{sub water}) was evaluated by measuring the induction time before turbidity changing of the synthetic solution. Fourier transform infrared spectrum (FT-IR) and thermogravimetric/differential thermal analysis (TG/DTA) techniques were applied to make clear the composition of hydrolyzed intermediates obtained at different C{sub water}. Powder X-ray diffraction (XRD) technique was used to track the crystallization process of TiO{sub 2} NCS. Transmission electron microscopy (TEM), XRD, FT-IR and TG/DTA techniques were used to characterize the particular properties of NCS. The C{sub water} controlled mechanism responsible for the slow hydrolysis and crystallization were discussed. Since no other organic capping ligands or rapid injecting techniques were used to limit NCS' growth and the solvent n-octanol can be easily separated and reused, this simple synthetic process is of green chemistry and has application potential in large-scale preparation of inorganic NCS.

  12. Mechanism of gypsum hydration

    Directory of Open Access Journals (Sweden)

    Pacheco, G.

    1991-06-01

    Full Text Available There is an hypothesis that the mechanism o f gypsum hydration and dehydration is performed through two simultaneous phenomena. In this study we try to clear up this phenomenon using chlorides as accelerators or a mixture of ethanol-methanol as retarders to carry out the gypsum setting. Natural Mexican gypsum samples and a hemihydrate prepared in the laboratory are used. The following analytical techniques are used: MO, DRX, DTA, TG and DTG. In agreement with the obtained results, it can be concluded: that colloid formation depends on the action of accelerators or retarders and the crystals are a consequence of the quantity of hemihydrate formed.

    En el mecanismo de hidratación y deshidratación del yeso existe la hipótesis de que éste se efectúa por dos fenómenos simultáneos. Este estudio intenta esclarecer estos fenómenos, empleando: cloruros como aceleradores o mezcla etanol-metanol como retardadores para efectuar el fraguado del yeso. Se emplean muestras de yeso de origen natural mexicano y hemihydrate preparado en laboratorio; se utilizan técnicas analíticas: MO, DRX, DTA, TG y DTG. De acuerdo a los resultados obtenidos se puede deducir: que la formación del coloide depende de la acción de los agentes aceleradores o retardadores y que los cristales son consecuencia de la cantidad de hemihidrato formado.

  13. Preparation of magnesium hydroxide nanoflowers from boron mud via anti-drop precipitation method

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xi [School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Blue Sky Technology Corporation, Beijing 100083 (China); Ma, Hongwen, E-mail: mahw@cugb.edu.cn [School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Jiang, Xiaoqian [School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Jiang, Zhouqing [School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Blue Sky Technology Corporation, Beijing 100083 (China)

    2014-08-15

    Highlights: • We use the anti-drop precipitation method for synthesis of magnesium hydroxide. • Boron mud which is solid waste from a borax factory is used as the magnesium source. • The magnesium hydroxide nanoflowers are prepared in a short time. • The as-prepared magnesium hydroxide can be used as an effective flame retardant. - Abstract: Using boron mud as the starting material, the flower-like magnesium hydroxide (MH) has been successfully prepared via anti-drop precipitation method. The effect of NH{sub 3}·H{sub 2}O concentration, aging time, and surfactant on the morphology of MH was investigated. The optimum precipitation conditions are dropping MgSO{sub 4} solution in 5% NH{sub 3}·H{sub 2}O solution, with 3% polyethylene glycol as surfactant, aging for 30 min. XRD, SEM, FI-IR, and TG/DTA have been employed to characterize the as-prepared samples. XRD reveals that MH with high purity has the brucite structure. SEM images show that the flower-like MH exists in the form of mono-disperse well uniform spherical aggregation with diameter of 3–5 μm. TG/DTA shows a total percentage of weight loss 33.6% with a well-defined endothermic peak near 381.3 °C corresponding to the decomposition of MH. Furthermore, it reports that the extremely fast primary nucleation is of significance for crystal growth of MH.

  14. Effect of grain structure on phase transformation events in Inconel 718

    International Nuclear Information System (INIS)

    Dahotre, N.B.; McCay, M.H.; McCay, T.D.; Hubbard, C.R.; Porter, W.D.; Cavin, O.B.

    1993-01-01

    Nickel base superalloys generally obtain their maximum strength from γ'[Ni 3 (Al,Ti)] and γ double-prime[Ni 3 (Al,Ti,Nb)] age hardening precipitates. During welding the γ' precipitation is very rapid and can lead to strain age cracking, which limits weldability. Thus, the weldable superalloys are limited in their Al and Ti content and hence in their ultimate strength. One method of increasing the ultimate strength of a superalloy, while avoiding strain age cracking, is the addition of Nb. This produces Ni 3 Nb(δ), and when used in conjunction with a limited amount of γ', results in an increase in strength without strain age cracking problems. The γ double-prime does not lead to strain age cracking because its transformation kinetics are too slow for formation during ordinary welding practice. This combination of γ' and γ double-prime strengthening is incorporated into the Inconel 718 alloys. The research reported herein was undertaken to determine the time-temperature response of Inconel 718 in the as-cast, wrought and wrought-grain-grown states, using differential thermal analysis (DTA). It is essential to locate the temperature regime of each phase transformation event and to study the transformation sequence in order to tailor sound laser welding techniques for Inconel 718. In the present research, a DTA technique was employed to study both the phase transformation events and the phase transformation sequence as a function of the pre-existing condition of the alloy

  15. Synthesis and thermal characterization of new ternary chelates of piroxicam and tenoxicam with glycine and DL-phenylalanine and some transition metals

    Science.gov (United States)

    Zayed, M. A.; El-Dien, F. A. Nour; Mohamed, Gehad G.; El-Gamel, Nadia E. A.

    2006-05-01

    The ternary chelates of piroxicam (Pir) and tenoxicam (Ten) with Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) in the presence of various amino acids such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized with different physicochemical methods. IR spectra confirm that Pir and Ten behave as a neutral bidentate ligand coordinated to the metal ions via the pyridine- N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its deprotonated carboxylic group. In addition, PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its deprotonated carboxylic and amino groups. The solid reflectance spectra and magnetic moment measurements confirm that all the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. Thermal behaviour of the complexes is extensively studied using TG and DTA techniques. TG results show that water molecules (hydrated and coordinated) and anions are removed in the first and second steps while Gly, PhA, Pir and Ten are decomposed in the next and subsequent steps. The pyrolyses of the chelates into different gases are observed in the DTA curves as exo- or endothermic peaks. Also, phase transition states are observed in some chelates. Different thermodynamic parameters are calculated using Coats-Redfern method and the results are interpreted.

  16. Thermomagnetic properties of Co1-x Zn x Fe2O4 (x=0.1-0.5) nanoparticles

    International Nuclear Information System (INIS)

    Arulmurugan, R.; Vaidyanathan, G.; Sendhilnathan, S.; Jeyadevan, B.

    2006-01-01

    Ultra fine particles of Co 1- x Zn x Fe 2 O 4 with stoichiometric proportion (x) varying from 0.1 to 0.5 were prepared by the usual co-precipitation method. The preparation procedure favored the formation of complex Co-Zn-substituted ferrite nanoparticles. The particles were characterized by XRD. The particle size was calculated by using the Debye-Scherrer formula. The size of the particles precipitated was less than 12 nm. Thermal studies were carried out using simultaneous TG-DTA studies. TG-DTA studies confirmed the presence of associated water content in the precipitated nanoparticles and indicated that ferritization was complete. The temperature-dependent magnetization was recorded at two different fields (5 and 1 kOe). Curie temperature of the powder samples was calculated by extrapolating the linear part of the temperature-dependent magnetization data measured at 1 kOe. Thermomagnetic coefficient which is the first derivative of the temperature-dependent magnetization curve help us in understanding the redistribution of cations between the A and B sites, taking place during the process of heating in the case of nanoparticles. The temperature at which cation redistribution takes place depends on the zinc concentration. From the value of thermomagnetic coefficient and the temperature range, where k T is maximum, it is clear that Co 0.5 Zn 0.5 Fe 2 O 4 particles can be used for the preparation of temperature-sensitive ferrofluid

  17. Examining the role of different age groups, and of vaccination during the 2012 Minnesota pertussis outbreak

    Science.gov (United States)

    Worby, Colin J.; Kenyon, Cynthia; Lynfield, Ruth; Lipsitch, Marc; Goldstein, Edward

    2015-01-01

    There is limited information on the roles of different age groups during pertussis outbreaks. Little is known about vaccine effectiveness against pertussis infection (both clinically apparent and subclinical), which is different from effectiveness against reportable pertussis disease, with the former influencing the impact of vaccination on pertussis transmission in the community. For the 2012 pertussis outbreak in Minnesota, we estimated odds ratios for case counts in pairs of population groups before vs. after the epidemic’s peak. We found children aged 11–12y, 13–14y and 8–10y experienced the greatest rates of depletion of susceptible individuals during the outbreak’s ascent, with all ORs for each of those age groups vs. groups outside this age range significantly above 1, with the highest ORs for ages 11–12y. Receipt of the fifth dose of DTaP was associated with a decreased relative role during the outbreak’s ascent compared to non-receipt [OR 0.16 (0.01, 0.84) for children aged 5, 0.13 (0.003, 0.82) for ages 8–10y, indicating a protective effect of DTaP against pertussis infection. No analogous effect of Tdap was detected. Our results suggest that children aged 8–14y played a key role in propagating this outbreak. The impact of immunization with Tdap on pertussis infection requires further investigation. PMID:26278132

  18. New investigation of phase equilibria in the system Al-Cu-Si.

    Science.gov (United States)

    Ponweiser, Norbert; Richter, Klaus W

    2012-01-25

    The phase equilibria and invariant reactions in the system Al-Cu-Si were investigated by a combination of optical microscopy, powder X-ray diffraction (XRD), differential thermal analysis (DTA) and electron probe micro analysis (EPMA). Isothermal phase equilibria were investigated within two isothermal sections. The isothermal section at 500 °C covers the whole ternary composition range and largely confirms the findings of previous phase diagram investigations. The isothermal section at 700 °C describes phase equilibria only in the complex Cu-rich part of the phase diagram. A new ternary compound τ was found in the region between (Al,Cu)-γ(1) and (Cu,Si)-γ and its solubility range was determined. The solubility of Al in κ-CuSi was found to be extremely high at 700 °C. In contrast, no ternary solubility in the β-phase of Cu-Al was found, although this phase is supposed to form a complete solid solution according to previous phase diagram assessments. Two isopleths, at 10 and 40 at.% Si, were investigated by means of DTA and a partial ternary reaction scheme (Scheil diagram) was constructed, based on the current work and the latest findings in the binary systems Al-Cu and Cu-Si. The current study shows that the high temperature equilibria in the Cu-rich corner are still poorly understood and additional studies in this area would be favorable.

  19. Use of 3D printers to create a patient‐specific 3D bolus for external beam therapy

    Science.gov (United States)

    Baker, Jamie; Hsia, An Ting; Xu, Zhigang

    2015-01-01

    The purpose of this paper is to demonstrate that an inexpensive 3D printer can be used to manufacture patient‐specific bolus for external beam therapy, and to show we can accurately model this printed bolus in our treatment planning system for accurate treatment delivery. Percent depth‐dose measurements and tissue maximum ratios were used to determine the characteristics of the printing materials, acrylonitrile butadiene styrene and polylactic acid, as bolus material with physical density of 1.04 and 1.2 g/cm3, and electron density of 3.38×1023electrons/cm3 and 3.80×1023 electrons/cm3, respectively. Dose plane comparisons using Gafchromic EBT2 film and the RANDO phantom were used to verify accurate treatment planning. We accurately modeled a printing material in Eclipse treatment planning system, assigning it a Hounsfield unit of 260. We were also able to verify accurate treatment planning using gamma analysis for dose plane comparisons. With gamma criteria of 5% dose difference and 2 mm DTA, we were able to have 86.5% points passing, and with gamma criteria of 5% dose difference and 3 mm DTA, we were able to have 95% points passing. We were able to create a patient‐specific bolus using an inexpensive 3D printer and model it in our treatment planning system for accurate treatment delivery. PACS numbers: 87.53.Jw, 87.53.Kn, 87.56.ng PMID:26103485

  20. PIXE/RBS as a tool to study cementitious materials: Application to the dynamic leaching of concrete

    International Nuclear Information System (INIS)

    Llorente, I.; Castellote, M.; Gonzalez-Arrabal, R.; Ynsa, M.D.; Munoz-Martin, A.; Viedma, P.G. de; Castillo, A.; Martinez, I.; Andrade, C.; Zuloaga, P.; Ordonez, M.

    2009-01-01

    The suitability of the application of Ion Beam Analysis (IBA) techniques such as Particle Induced X-ray Emission spectrometry (PIXE) and Rutherford Backscattering Spectrometry (RBS) to elemental depth profiling in concrete is analysed, studying hardened samples of concrete prior to and after a dynamic leaching test. A calibration of the data has been done by comparing the results obtained by IBA techniques with those obtained by Chemical and Thermogravimetric Analysis (TG/DTA). From PIXE and RBS data relevant information about the migration of minor elements, within the concrete matrix after leaching is obtained.

  1. Applications for skimmer coupling systems, combining simultaneous thermal analysers with mass spectrometers

    International Nuclear Information System (INIS)

    Kaisersberger, E.; Post, E.

    1998-01-01

    The sensitivity of the Skimmer coupling for combining the simultaneous thermal analysis (STA) method TG-DTA/DSC and mass spectrometry (MS) is further improved by a factor of three using an automatic vacuum control device. Especially high mass numbers are detected without the common condensation problems met in capillary couplings, as is shown by application of the skimmer coupling for coal, CuGaSe 2 -semiconductor material and polystyrene. The basic idea of the novel pulse thermal analysis technique (PTA) is demonstrated. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  2. Preparation of Pb(Mg1/3Nb2/3)O3 by simultaneous precipitations

    International Nuclear Information System (INIS)

    Juiz, S.A.; Varela, J.A.; Santilli, C.V.; Pulcinelli, S.H.; Longo, E.

    1990-01-01

    Pb(Mg 1/3 Nb 2/3 )O 3 was obtained by simultaneous precipitation of Pb(NO 3 ) 2' Mg(NO 3 ) 2 . 6H 2 O and NH 4 H 2 /NbO(C 2 O 4 ) 3 ./3H 2 O in alkaline medium. DTA of the precipitates show the PMN formation between 700 and 750 0 C. XRD on powder calcined at 750 0 C indicates on other phases basiders PMN. Measurements of dielectric constants shows a Curie temperature shifted to -80 0 C. (author) [pt

  3. Thermal analysis and prediction of phase equilibria in ternary Pb-Zn-Ag system

    Directory of Open Access Journals (Sweden)

    Živković D.

    2011-01-01

    Full Text Available Ternary Pb-Zn-Ag system is typical for some physicochemical processes going on in refining phase in the extractive metallurgy of lead. Therefore, investigation of mentioned system is important from both theoretical and practical research of the phenomena occurring during the lead desilverizing process. The results of experimental investigation using differential thermal analysis (DTA and thermodynamic calculation of phase equilibria in Pb-Zn-Ag system according to CALPHAD method, in the sections with Zn:Ag mass ratio equal to 90:10, 70:30 and 50:50, are presented in this paper.

  4. PIXE/RBS as a tool to study cementitious materials: Application to the dynamic leaching of concrete

    Energy Technology Data Exchange (ETDEWEB)

    Llorente, I., E-mail: irene@cenim.csic.e [Centro Nacional de Investigaciones Metalurgicas (CENIM-CSIC), Avda Gregorio del Amo, 8, 28040 Madrid (Spain); Castellote, M. [Instituto de Ciencias de la Construccion ' Eduardo Torroja' (IETcc-CSIC), Serrano Galvache, 4, 28033 Madrid (Spain); Gonzalez-Arrabal, R. [Parque Cientifico de Madrid, Campus de Cantoblanco, Einstein 13, 28049 Madrid (Spain); Ynsa, M.D.; Munoz-Martin, A. [Centro de Microanalisis de Materiales (CMAM), Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain); Viedma, P.G. de; Castillo, A.; Martinez, I.; Andrade, C. [Instituto de Ciencias de la Construccion ' Eduardo Torroja' (IETcc-CSIC), Serrano Galvache, 4, 28033 Madrid (Spain); Zuloaga, P.; Ordonez, M. [Empresa Nacional de Residuos Radiactivos, S.A. (ENRESA), Emilio Vargas, 7, 28043 Madrid (Spain)

    2009-12-15

    The suitability of the application of Ion Beam Analysis (IBA) techniques such as Particle Induced X-ray Emission spectrometry (PIXE) and Rutherford Backscattering Spectrometry (RBS) to elemental depth profiling in concrete is analysed, studying hardened samples of concrete prior to and after a dynamic leaching test. A calibration of the data has been done by comparing the results obtained by IBA techniques with those obtained by Chemical and Thermogravimetric Analysis (TG/DTA). From PIXE and RBS data relevant information about the migration of minor elements, within the concrete matrix after leaching is obtained.

  5. A New Star-shaped Carbazole Derivative with Polyhedral Oligomeric Silsesquioxane Core: Crystal Structure and Unique Photoluminescence Property.

    Science.gov (United States)

    Xu, Zixuan; Yu, Tianzhi; Zhao, Yuling; Zhang, Hui; Zhao, Guoyun; Li, Jianfeng; Chai, Lanqin

    2016-01-01

    A new inorganic–organic hybrid material based on polyhedral oligomeric silsesquioxane (POSS) capped with carbazolyl substituents, octakis[3-(carbazol-9-yl)propyldimethylsiloxy]-silsesquioxane (POSS-8Cz), was successfully synthesized and characterized. The X-ray crystal structure of POSS-8Cz were described. The photophysical properties of POSS-8Cz were investigated by using UV–vis,photoluminescence spectroscopic analysis. The hybrid material exhibits blue emission in the solution and the solid film.The morphology and thermal stablity properties were measured by X-ray diffraction (XRD) and TG-DTA analysis.

  6. Application of thermal analysis methods on the study of PE thermal degradation and the influence of Mg (OH) sub 2 as fire retardant

    CERN Document Server

    Zarringhalam-Moghaddam, A

    2002-01-01

    Fire retardation effects of Mg(OH) sub 2 on PE was studied utilizing DTA, TGA and DSC methods. Reductions on reaction peak area and mass loss rate with the addition of Mg(OH) sub 2 were observed as indication of retardation effects of Mg(OH) sub 2 on PE. Cone calorimeter tests were performed on samples to verify the thermo analytical results. It was concluded that when Mg(OH) sub 2 is present it effectively modified the degradation behavior of PE and the thermal analyses are useful and rapid methods to study the retardation effects.

  7. Description of the ternary system Cu-Ge-Te

    International Nuclear Information System (INIS)

    Dogguy, M.; Carcaly, C.; Rivet, J.; Flahaut, J.

    1977-01-01

    The Cu-Ge-Te ternary system has been studied by DTA and by crystallographic and metallographic analysis. The existence of a ternary compound Cu 2 GeTe 3 is demonstrated; this compound has a ternary incongruent melting point at 500 0 C. This ternary compound has a superstructure of a zinc blende type. The study shows the existence of five ternary eutectics. Two liquid-liquid miscibility gaps exist: the first is situated entirely in the ternary system; the second gives a monotectic region within the ternary system. (Auth.)

  8. Structure and thermal properties of nanospheres obtained by ethoxy silanes copolymerization

    International Nuclear Information System (INIS)

    Pedroso, Marcos A.S.; Mothe, Cheila G.; Dias, Marcos L.

    2001-01-01

    Thermal and structural characterization of organophylic nano spherical copolymers of tetra ethoxysilane (TEOS) and methyltriethoxysilane (MTEOS) or dimethyldiethoxysilane (DMDEOS) obtained by sol-gel reaction terminated by trimethylchlorosilane are described. 29 Si NMR, wide angle X-ray scattering (WAXS) and thermal analysis (TG/DTG and DTA) were employed. Due to the high reactivity of TEOS, the copolymers are silica-silicon hybrids showing bilayer structure where silica constitutes a core and a alkyl-rich chemical structure constitutes the external layer. The copolymers present higher mass lost at high temperatures than TEOS homopolymer. (author)

  9. [Stability of physical state on compound hawthorn dropping pills].

    Science.gov (United States)

    Zhang, Wei; Chen, Hong-Yan; Jiang, Jian-Lan

    2008-11-01

    To evaluate the stability of physical state with accelerate test and dropping in process before and after on compound hawthorn dropping pills. Scanning electron microscope, TG-DTA, FT-IR and XRD were used. The active components presented amorphous, tiny crystal and molecular state in dropping pills, and it had no obvious reaction between PEG 4000 and active components. With time prolonging, a little of active components changed from amorphous state to tiny crystal or molecular state. Solid dispersion improved the stability and dissolution of compound hawthorn dropping pills.

  10. Glass formation in RbF-BeF2-ErF3 system

    International Nuclear Information System (INIS)

    Reshetnikova, L.P.; Topshinoev, A.P.; Zakharova, B.S.; Sipachev, V.A.

    1987-01-01

    IR spectroscopic method (200-2000 cm -1 ) is used to study the glass structure in RbF-BeF 2 -ErF 3 system. It is shown that with increase of erbium fluoride content in fluoroberyllate glasses the absorption bands characteristic of (BeF 3 ) n n- groupings, appear in spectra. DTA and X-ray diffraction analysis of the glass annealing products are used to study the glass crystallization process. It is stated that erbium fluoride introduction into the glass results in increase of crystallization stability. The glass structure model is suggested

  11. Use of Thermoanalytic Methods in the Evaluation of Combusted Materials

    Directory of Open Access Journals (Sweden)

    František Krepelka

    2006-12-01

    Full Text Available The paper describes possibilities of using thermoanalytic methods for the evaluation and comparison of materials designed for a direct combustion. Differential thermal analysis (DTA and thermogravimetric analysis (TGA were both used in the evaluation. The paper includes a description of methods of data processing from analyses for the purposes of comparison of used materials regarding their heating values. The following materials were analysed in the experiments: wooden coal of objectional grain size, fly ash from heating plant exhaust funnels, dendromass waste: spruce sawdust, micro-briquettes of spruce sawdust and fly-ash combined.

  12. Development of environment radiation database management system

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun [Daeduk College, Taejon (Korea, Republic of)

    1999-03-15

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation.

  13. Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis.

    Science.gov (United States)

    Zhu, Guoliang; Wang, Wei; Wang, Rui; Zhao, Chuanbao; Pan, Weitao; Huang, Haijun; Du, Dafan; Wang, Donghong; Shu, Da; Dong, Anping; Sun, Baode; Jiang, Sheng; Pu, Yilong

    2017-08-29

    The formation mechanism of TiC particles in a Ni-Ti-C system were revealed by using differential thermal analysis (DTA), XRD, and SEM to identify the reaction products in different temperature ranges. The results indicated that the synthesis mechanism of TiC in Ni-Ti-C system was complex; several reactions were involved in the combustion synthesis of TiC-Ni composite. The Ni-Ti intermediate phases play important roles during the formation of TiC. Moreover, the influence of heating rate on the size range of TiC was also discussed.

  14. Funciones Orbitofrontales en pacientes con Demencia tipo Alzheimer

    OpenAIRE

    Solórzano Jiménez, Luis Mariano

    2016-01-01

    [ES] La DTA se caracteriza por el deterioro progresivo de la memoria y de otras áreas de la función cognitiva, tal es el caso de las funciones ejecutivas (FE), propias de la corteza prefrontal (CPF) y relacionadas con la autorregulación del comportamiento. De esta forma, los procesos asociados a las FE pueden ser de índole cognitivo (memoria de trabajo, razonamiento, resolución de problemas, planificación, secuenciación, atención sostenida, resistencia a la interferencia, utilización de feedb...

  15. The effects of additives on the microstructure and sinterability of molybdenum oxide - study of related solid solutions

    International Nuclear Information System (INIS)

    Kassem, M.

    2006-01-01

    This study focuses on the phase transformation induced during mixing a fixed quantity of MoO 3 with various concentration of V 2 O 5 , Bn 2 O 5 , Al 2 O 3 and pure aluminium. These concentrations are 2, 3, 4, 5, 10, 20, 40 and 50%. Employing several physical techniques such as x-ray powder diffraction, FTIR and DTA, different solid solution were identified. Also the compressibility and sintering of these solid solutions have been studied via the variation of the density of pellets prepared from these solid solutions (Author)

  16. Development of environment radiation database management system

    International Nuclear Information System (INIS)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun

    1999-03-01

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation

  17. Systems of pyridine, piperidine, piperazine, morpholine hydrochlorides-terbium (dysprosium) chloride-water

    International Nuclear Information System (INIS)

    Gajfutdinova, R.K.; Sharafutdinova, A.A.; Murinov, Yu.I.

    1988-01-01

    The isothermal cross section method at 25 and 50 deg C is applied to study pyridine hydrochloride-terbium chloride-water (1) piperidine hydrochloride-dysprosium chloride-water (2), piperazine dihydrochloride-dysprosium chloride-water (3) and morpholine hydrochloride-terbium chloride (4) systems. Solubility isotherma prove the formation of incongruently soluble compound of the TbCl 3 x6C 5 H 5 NxHCl composition systems (1). The individuality of the new solid phase is proved by the chemical and DTA methods. Systems (2-4) are of a simple eutonic type

  18. Minutes of the Explosives Safety Seminar (19th) Held at Los Angeles, California, 9-10-11 September 1980. Volume 1

    Science.gov (United States)

    1980-01-01

    acid is the principal fuel. The coating is added to prevent the water-aluminum reaction. The guar gum is used as the thickening gelling agent to prevent...and the components did not stay mixed. The thickening characteristic was not present. A DTA/TGA thermogram of a guar gum sample dried for 18.5 days at...to 4.6 ± 0.1 POWDER COMPONENT Aluminum (coated wtth .125% isostearic acid) 97.6 ± 2.0Guar Gum 1.4 * 0.2Potassium Acid Phthalate 1.0 ± 0.2 679 IJ x x

  19. Fabrication of Polycrystalline Lanthanum Manganite (La0.99 Mn0.01 O3) Powder and Fibres by Electrospinning Method

    International Nuclear Information System (INIS)

    Yin Yin Win; That Htar Lwin; Than Than Win; Yin Maung Maung; Ko Ko Kyaw Soe

    2011-12-01

    Lanthanum manganite (La0.99 Mn0.01 O3) powder have been prepared by using pyrolysis methods. Lanthanum manganite fibres were successfully fabricated by electro-spinning utilizing precursors. Polycrystalline perovskite structure lanthanum manganite powder and fibres showed that the grain size and crystal grain increased significantly with the increase in calcination temperature. A variety of techniques (SEM, FT-IR and TG-DTA) were employed to study the morphology and fibre quality, crystal structure, and thermal analysis of La0.99 Mn0.01 O3 specimen respectively.

  20. Potentiometric studies on some ternary complexes of Nd(III), Sm(III), Gd(III) and Ho(III) with cyclohexanediaminetetraacetic acid as primary ligand

    International Nuclear Information System (INIS)

    Marathe, D.G.; Munshi, K.N.

    1983-01-01

    The formation constants of the ternary complexes of neodymium(III), samarium(III), gadlonium(III) and holmium(III) with cyclohexanediaminetetraacetic acid (CyDTA) as primary ligand and dihydroxynaphthalene (DHN), dihydroxynaphthalene-6-sulphonic acid (DHNSA) and cateechol-3,5-disulphonic acid (CDSA) as secondary ligands have been investigated by potentiometric titration technique. The secondary ligands have been investigated by potentiometric titration technique. The values of formation constants of 1:1:1 ternary chelates are reported at three different temperatures, and at a fixed ionic strength, μ = 0.1 M (NaClO 4 ). (author)

  1. Gel and xerogel of thorium phosphate. I characteristics of evolution during drying

    International Nuclear Information System (INIS)

    Brandel, V.; Iroulart, G.; Simoni, E.; Genet, M.

    1990-01-01

    In order to obtain a transparent matrix for optical spectroscopy studies of doped ions, chemical conditions to get a gel and a xerogel of thorium phosphate have been investigated. Both are transparent for a long time. Transformation of the gel into xerogel under drying procedure has been followed by DTA, TGA, NMR and studied by a fluorescent probe UO 2 2+ . After thermal treatment of the amorphous xerogel we get the crystallized and opaque thorium orthophosphate. This amorphous → crystal transition was studied by far infrared spectroscopy and X rays [fr

  2. Structure and thermal decomposition of sulfated β-cyclodextrin intercalated in a layered double hydroxide

    International Nuclear Information System (INIS)

    Wang Ji; Wei Min; Rao Guoying; Evans, D.G.; Duan Xue

    2004-01-01

    The sodium salt of hexasulfated β-cyclodextrin has been synthesized and intercalated into a magnesium-aluminum layered double hydroxide by ion exchange. The structure, composition and thermal decomposition behavior of the intercalated material have been studied by variable temperature X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), inductively coupled plasma emission spectroscopy (ICP), and thermal analysis (TG-DTA) and a model for the structure has been proposed. The thermal stability of the intercalated sulfated β-cyclodextrin is significantly enhanced compared with the pure form before intercalation

  3. Structure and thermal decomposition of sulfated β-cyclodextrin intercalated in a layered double hydroxide

    Science.gov (United States)

    Wang, Ji; Wei, Min; Rao, Guoying; Evans, David G.; Duan, Xue

    2004-01-01

    The sodium salt of hexasulfated β-cyclodextrin has been synthesized and intercalated into a magnesium-aluminum layered double hydroxide by ion exchange. The structure, composition and thermal decomposition behavior of the intercalated material have been studied by variable temperature X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), inductively coupled plasma emission spectroscopy (ICP), and thermal analysis (TG-DTA) and a model for the structure has been proposed. The thermal stability of the intercalated sulfated β-cyclodextrin is significantly enhanced compared with the pure form before intercalation.

  4. Fabrication and testing of the sintered ceramic UO2 fuel - I - III, Part III - testing of sintered uranium dioxide properties dependent on the fabrication procedure

    International Nuclear Information System (INIS)

    Novakovic, M.; Ristic, M.M.

    1961-12-01

    The objective of this task was testing the influence of some parameters on the properties of sintered UO 2 . The influence of parameters tested were as follows: adhesives; pressure in the pressing procedure; temperature of sintering of the UO 2 powder. Other parameters were chosen according to the theoretical study. Sintering was done in argon atmosphere. Characterization of the UO 2 powder was performed meaning determining the needed chemical, physical and physico-chemical properties. Some new methods were developed within this task: SET method for measuring the specific surfaces, DTA, TGA, high-temperature torsion

  5. Promoting renewables through soft loans

    International Nuclear Information System (INIS)

    Marcks, C.

    1999-01-01

    The DtA, founded in 1950s, is a federal institution owned by the German government. It assists the government to implement its economic, environmental and social policy. Financial assistance is being granted mainly through soft loans. Such loans are a flexible instrument, permitting to partially correct prices without severely distorting market forces. They assure total financing while spreading the subsidy over the entire period of the engagement. This avoids windfall opportunities often related to direct subsidies. Investors, therefore, have an intrinsic motivation to only submit sound and profitable projects. (orig./RHM)

  6. Thermal stability study of melt-quenched (Fe/sub 1-x/Ni/sub x)/sub 76/B/sub 24/ amorphous ribbons

    International Nuclear Information System (INIS)

    Ashfaq, A.; Shamim, A.; Suleman, M.

    1995-01-01

    A study of thermal stability of amorphous (Fe/sub 1-x/Ni/sub x/)sub 76/B/sub 24/ (where x-0.5, 0.9) alloy ribbons, obtained from the smelt, has been undertaken by means of dynamics temperature resistivity measurements and differential thermal analysis method. RT-curves of these alloys exhibit unusual behavior, which may be due to the complexity of the crystal structures arising from heating. DTA-results show a hump and an exothermic peak, magnetic behavior of amorphous and isochronal heat treated alloys are also studied. (author)

  7. Synthesis and characterization of boehmites obtained from gibbsite in presence of different environments

    Energy Technology Data Exchange (ETDEWEB)

    Denigres Filho, Ricardo Wilson Nastari; Rocha, Gisele de Araujo; Vieira-Coelho, Antonio Carlos, E-mail: acvcoelh@usp.br [Universidade de Sao Paulo (LPSS/EP/USP), SP (Brazil). Departamento de Engenharia Metalurgica e de Materiais. Laboratorio de Materias-Primas Particuladas; Montes, Celia Regina [Centro de Energia Nuclear na Agricultura (NUPEGEL/CENA/USP), Piracicaba, SP (Brazil). Nucleo de Pesquisas Geoquimicas e Geofisicas da Listosfera

    2016-05-15

    In this study, results related to boehmite synthesis by hydrothermal processes starting from a Bayer commercial gibbsite are reported. The processes have been conducted from aqueous suspensions with initial acidic or alkaline pH, without or with acetate ion, at 160 deg C for 72h to 168h. The final materials were characterized by X-ray diffraction (XRD), thermal methods (DTA and TGA) and scanning electron microscopy (SEM). The influence of the synthesis conditions on the morphology of the boehmite crystals obtained from the gibbsite at different hydrothermal processes are discussed. (author)

  8. Diagnosis of the surface layer damage in a 1960s reinforced concrete building

    Directory of Open Access Journals (Sweden)

    S.L. Pagliolico

    2014-01-01

    Full Text Available This work aimed to determine the degradation causes of the Palace of Public Works located in S. Giovanni square in Turin (Piedmont, Italy. The samples collected from the surface layer were characterized by means of scanning electron microscopy (SEM, X-ray diffraction (XRD, thermogravimetric coupled with differential thermal analysis (TG-DTA, mercury intrusion porosimetry measurements (MIP and phenolphthalein test. Metallographic and elemental analyses were also carried out on the steel reinforcing bars. An exhaustive picture of the main causes of deterioration was drawn in order to design the intervention of rehabilitation.

  9. Growth and characterization of nonlinear optical single crystal: Nicotinic L-tartaric

    Energy Technology Data Exchange (ETDEWEB)

    Sheelarani, V.; Shanthi, J., E-mail: shanthinelson@gmail.com [Department of Physics, Avinashilingam Institute for Home Science and Higher Education for Women, Coimbatore-641043 (India)

    2015-06-24

    Nonlinear optical single crystals were grown from Nicotinic and L-Tartaric acid by slow evaporation technique at room temperature. Structure of the grown crystal was confirmed by single crystal X-ray diffraction studies, The crystallinity of the Nicotinic L-Tartaric (NLT) crystals was confirmed from the powder XRD pattern. The transparent range and cut off wavelength of the grown crystal was studied by the UV–Vis spectroscopic analysis.The thermal stability of the crystal was studied by TG-DTA. The second harmonic generation (SHG) efficiency of NLT was confirmed by Kurtz Perry technique.

  10. Screening strategies for atrial fibrillation: a systematic review and cost-effectiveness analysis.

    Science.gov (United States)

    Welton, Nicky J; McAleenan, Alexandra; Thom, Howard Hz; Davies, Philippa; Hollingworth, Will; Higgins, Julian Pt; Okoli, George; Sterne, Jonathan Ac; Feder, Gene; Eaton, Diane; Hingorani, Aroon; Fawsitt, Christopher; Lobban, Trudie; Bryden, Peter; Richards, Alison; Sofat, Reecha

    2017-05-01

    Atrial fibrillation (AF) is a common cardiac arrhythmia that increases the risk of thromboembolic events. Anticoagulation therapy to prevent AF-related stroke has been shown to be cost-effective. A national screening programme for AF may prevent AF-related events, but would involve a substantial investment of NHS resources. To conduct a systematic review of the diagnostic test accuracy (DTA) of screening tests for AF, update a systematic review of comparative studies evaluating screening strategies for AF, develop an economic model to compare the cost-effectiveness of different screening strategies and review observational studies of AF screening to provide inputs to the model. Systematic review, meta-analysis and cost-effectiveness analysis. Primary care. Adults. Screening strategies, defined by screening test, age at initial and final screens, screening interval and format of screening {systematic opportunistic screening [individuals offered screening if they consult with their general practitioner (GP)] or systematic population screening (when all eligible individuals are invited to screening)}. Sensitivity, specificity and diagnostic odds ratios; the odds ratio of detecting new AF cases compared with no screening; and the mean incremental net benefit compared with no screening. Two reviewers screened the search results, extracted data and assessed the risk of bias. A DTA meta-analysis was perfomed, and a decision tree and Markov model was used to evaluate the cost-effectiveness of the screening strategies. Diagnostic test accuracy depended on the screening test and how it was interpreted. In general, the screening tests identified in our review had high sensitivity (> 0.9). Systematic population and systematic opportunistic screening strategies were found to be similarly effective, with an estimated 170 individuals needed to be screened to detect one additional AF case compared with no screening. Systematic opportunistic screening was more likely to be cost

  11. Risk of febrile seizures and epilepsy after vaccination with diphtheria, tetanus, acellular pertussis, inactivated poliovirus, and Haemophilus influenzae type B.

    Science.gov (United States)

    Sun, Yuelian; Christensen, Jakob; Hviid, Anders; Li, Jiong; Vedsted, Peter; Olsen, Jørn; Vestergaard, Mogens

    2012-02-22

    Vaccination with whole-cell pertussis vaccine carries an increased risk of febrile seizures, but whether this risk applies to the acellular pertussis vaccine is not known. In Denmark, acellular pertussis vaccine has been included in the combined diphtheria-tetanus toxoids-acellular pertussis-inactivated poliovirus-Haemophilus influenzae type b (DTaP-IPV-Hib) vaccine since September 2002. To estimate the risk of febrile seizures and epilepsy after DTaP-IPV-Hib vaccination given at 3, 5, and 12 months. A population-based cohort study of 378,834 children who were born in Denmark between January 1, 2003, and December 31, 2008, and followed up through December 31, 2009; and a self-controlled case series (SCCS) study based on children with febrile seizures during follow-up of the cohort. Hazard ratio (HR) of febrile seizures within 0 to 7 days (0, 1-3, and 4-7 days) after each vaccination and HR of epilepsy after first vaccination in the cohort study. Relative incidence of febrile seizures within 0 to 7 days (0, 1-3, and 4-7 days) after each vaccination in the SCCS study. A total of 7811 children were diagnosed with febrile seizures before 18 months, of whom 17 were diagnosed within 0 to 7 days after the first (incidence rate, 0.8 per 100,000 person-days), 32 children after the second (1.3 per 100,000 person-days), and 201 children after the third (8.5 per 100,000 person-days) vaccinations. Overall, children did not have higher risks of febrile seizures during the 0 to 7 days after the 3 vaccinations vs a reference cohort of children who were not within 0 to 7 days of vaccination. However, a higher risk of febrile seizures was found on the day of the first (HR, 6.02; 95% CI, 2.86-12.65) and on the day of the second (HR, 3.94; 95% CI, 2.18-7.10), but not on the day of the third vaccination (HR, 1.07; 95% CI, 0.73-1.57) vs the reference cohort. On the day of vaccination, 9 children were diagnosed with febrile seizures after the first (5.5 per 100,000 person-days), 12

  12. Analysis of phase formation in Ni-rich alloys of the Ni-Ta-W system by calorimetry, DTA, SEM, and TEM

    Energy Technology Data Exchange (ETDEWEB)

    Witusiewicz, V.T.; Hecht, U.; Warnken, N.; Fries, S.G. [Access e.V., Aachen (Germany); Hu Weiping [Inst. fuer Metallkunde und Metallphysik der RWTH Aachen (Germany)

    2006-04-15

    The partial enthalpies of dissolution of pure Ni, W and Ta in liquid ternary Ni-Ta-W alloys have been determined at (1773 {+-} 5) K using a high temperature isoperibolic calorimeter. Measurements were performed in Ni-rich alloys (from 80 to 100 at.% Ni) along sections with constant Ta:W atomic ratios 1:0, 2:1, 1:2, and 0:1. The partial enthalpies and thereby the integral enthalpy of mixing of these ternary alloys are calculated from the partial enthalpies of dissolution using SGTE Gibbs energies for pure elements as reference. The obtained thermochemical data confirm that in the investigated Ni-rich alloys the binary interactions between Ta and W as well as the ternary Ni-Ta-W interactions are negligibly small. Due to this the variation of the integral enthalpy of mixing of the ternary alloys is well described as linear combination of the constituent Ni-Ta and Ni-W binaries. Such behaviour of the ternary liquid alloys is related to a very low probability of new ternary stable phases to occur in solid state. This prediction is confirmed by differential thermal analysis, scanning electron microscopy, and transmission electron microscopy of the as-solidified and annealed samples obtained as last alloy compositions in the series of calorimetric dissolution. (orig.)

  13. Kinetics of crystal growth in amorphous solid and supercooled liquid TeSe20 using DTA and d.c. conductivity measurements

    International Nuclear Information System (INIS)

    Kotkata, M.F.; Mahmoud, E.A.; El-Mously, M.K.

    1979-07-01

    Curves of reaction rate versus temperature for constant heating rates (phi=1-10 0 C/min) constructed by analytical methods have been used to demonstrate the crystallization kinetics of amorphous solid TeSe 20 . The devitrification process takes place with predominance of random nucleation and one-dimensional growth, and is limited by combined switching and splitting of the chemical bonds. The mean value for the activation energy of the amorphous-crystal transformation, average E, is found to be 64 Kcal/mole. While, the quantity E calculated on the basis of d.c. conductivity changes during different isothermal crystallization (120-175 0 C) in supercooled liquid TeSe 20 , amounts to 11.5 Kcal/mole and suggests the existence of mixed chains in the liquid alloys. (author)

  14. A mathematical framework for virtual IMRT QA using machine learning.

    Science.gov (United States)

    Valdes, G; Scheuermann, R; Hung, C Y; Olszanski, A; Bellerive, M; Solberg, T D

    2016-07-01

    It is common practice to perform patient-specific pretreatment verifications to the clinical delivery of IMRT. This process can be time-consuming and not altogether instructive due to the myriad sources that may produce a failing result. The purpose of this study was to develop an algorithm capable of predicting IMRT QA passing rates a priori. From all treatment, 498 IMRT plans sites were planned in eclipse version 11 and delivered using a dynamic sliding window technique on Clinac iX or TrueBeam Linacs. 3%/3 mm local dose/distance-to-agreement (DTA) was recorded using a commercial 2D diode array. Each plan was characterized by 78 metrics that describe different aspects of their complexity that could lead to disagreements between the calculated and measured dose. A Poisson regression with Lasso regularization was trained to learn the relation between the plan characteristics and each passing rate. Passing rates 3%/3 mm local dose/DTA can be predicted with an error smaller than 3% for all plans analyzed. The most important metrics to describe the passing rates were determined to be the MU factor (MU per Gy), small aperture score, irregularity factor, and fraction of the plan delivered at the corners of a 40 × 40 cm field. The higher the value of these metrics, the worse the passing rates. The Virtual QA process predicts IMRT passing rates with a high likelihood, allows the detection of failures due to setup errors, and it is sensitive enough to detect small differences between matched Linacs.

  15. Evaluation of an automatic segmentation algorithm for definition of head and neck organs at risk.

    Science.gov (United States)

    Thomson, David; Boylan, Chris; Liptrot, Tom; Aitkenhead, Adam; Lee, Lip; Yap, Beng; Sykes, Andrew; Rowbottom, Carl; Slevin, Nicholas

    2014-08-03

    The accurate definition of organs at risk (OARs) is required to fully exploit the benefits of intensity-modulated radiotherapy (IMRT) for head and neck cancer. However, manual delineation is time-consuming and there is considerable inter-observer variability. This is pertinent as function-sparing and adaptive IMRT have increased the number and frequency of delineation of OARs. We evaluated accuracy and potential time-saving of Smart Probabilistic Image Contouring Engine (SPICE) automatic segmentation to define OARs for salivary-, swallowing- and cochlea-sparing IMRT. Five clinicians recorded the time to delineate five organs at risk (parotid glands, submandibular glands, larynx, pharyngeal constrictor muscles and cochleae) for each of 10 CT scans. SPICE was then used to define these structures. The acceptability of SPICE contours was initially determined by visual inspection and the total time to modify them recorded per scan. The Simultaneous Truth and Performance Level Estimation (STAPLE) algorithm created a reference standard from all clinician contours. Clinician, SPICE and modified contours were compared against STAPLE by the Dice similarity coefficient (DSC) and mean/maximum distance to agreement (DTA). For all investigated structures, SPICE contours were less accurate than manual contours. However, for parotid/submandibular glands they were acceptable (median DSC: 0.79/0.80; mean, maximum DTA: 1.5 mm, 14.8 mm/0.6 mm, 5.7 mm). Modified SPICE contours were also less accurate than manual contours. The utilisation of SPICE did not result in time-saving/improve efficiency. Improvements in accuracy of automatic segmentation for head and neck OARs would be worthwhile and are required before its routine clinical implementation.

  16. Development and characterization of glass-ceramic sealants in the (CaO-Al2O3-SiO2-B2O3) system for Solid Oxide Electrolyzer Cells

    International Nuclear Information System (INIS)

    Khedim, Hichem; Nonnet, Helene; Mear, Francois O.

    2012-01-01

    The efficiency of glass-ceramic sealants plays a crucial role in Solid Oxide Electrolyzer Cell performance and durability. In order to develop suitable sealants, operating around 800 degrees C, two parent glass compositions, CAS1B and CAS2B, from the CaO-Al 2 O 3 -SiO 2 -B 2 O 3 system were prepared and explored. The thermal and physicochemical properties of the glass ceramics and their crystallization behavior were investigated by HSM. DTA and XRD analyses. The microstructure and chemical compositions of the crystalline phases were investigated by microprobe analysis. Bonding characteristic as well as chemical interactions of the parent glass with yttria-stabilized zirconia (YSZ) electrolyte and ferritic steel-based interconnect (Crofere (R)) were also investigated. The preliminary results revealed the superiority of CAS2B glass for sealing application in SOECs. The effect of minor additions of V 2 O 5 , K 2 O and TiO 2 on the thermal properties was also studied and again demonstrated the advantages of the CAS2B glass composition. Examining the influence of heat treatment on the seal behavior showed that the choice of the heating rate is a compromise between delaying the crystallization process and delaying the viscosity drop. The thermal Expansion Coefficients (TEC) obtained for the selected glass ceramic are within the desired range after the heat treatment of crystallization. The crystallization kinetic parameters of the selected glass composition were also determined under non-isothermal conditions by means of differential thermal analysis (DTA) and using the formal theory of transformations for heterogeneous nucleation. (authors)

  17. Methods for addressing "innocent bystanders" when evaluating safety of concomitant vaccines.

    Science.gov (United States)

    Wang, Shirley V; Abdurrob, Abdurrahman; Spoendlin, Julia; Lewis, Edwin; Newcomer, Sophia R; Fireman, Bruce; Daley, Matthew F; Glanz, Jason M; Duffy, Jonathan; Weintraub, Eric S; Kulldorff, Martin

    2018-04-01

    The need to develop methods for studying the safety of childhood immunization schedules has been recognized by the Institute of Medicine and Department of Health and Human Services. The recommended childhood immunization schedule includes multiple vaccines in a visit. A key concern is safety of concomitant (same day) versus separate day vaccination. This paper addresses a methodological challenge for observational studies using a self-controlled design to investigate the safety of concomitant vaccination. We propose a process for distinguishing which of several concomitantly administered vaccines is responsible for increased risk of an adverse event while adjusting for confounding due to relationships between effect modifying risk factors and concomitant vaccine combinations. We illustrate the approach by re-examining the known increase in risk of seizure 7 to 10 days after measles-mumps-rubella (MMR) vaccination and evaluating potential independent or modifying effects of other vaccines. Initial analyses suggested that DTaP had both an independent and potentiating effect on seizure. After accounting for the relationship between age at vaccination and vaccine combination, there was little evidence for increased risk of seizure with same day administration of DTaP and MMR; incidence rate ratio, 95% confidence interval 1.2 (0.9-1.6), P value = θ.226. We have shown that when using a self-controlled design to investigate safety of concomitant vaccination, it can be critically important to adjust for time-invariant effect modifying risk factors, such as age at time of vaccination, which are structurally related to vaccination patterns due to recommended immunization schedules. Copyright © 2018 John Wiley & Sons, Ltd.

  18. Phase-Pure of BiFeO3 Ceramic Based on Citric Acid - Assisted Gel by Sintering Time Variation

    Science.gov (United States)

    Suastiyanti, Dwita; Ismojo

    2017-07-01

    Bismuth ferrite powder (BiFeO3/BFO) with high purity was synthesized by sol-gel process. It was used Bi5O(OH)9(NO3)4 and Fe(NO3)3.9H2O as main compound sources. Citric acid (C6H8O7) was used as fuell. As multiferroic material, BFO promises important technological applications in several devices like data strorage, spinotronics, sensor, actuator devices etc. This research would know the optimum process condition of sol-gel process to produce BFO powder by varying of sintering time. The novelty of this research is how to produce BFO in single phase by simple method. It was used calcination condition at 160°C for 4 hours and sintering condition at 600°C with varying of sintering time of 4, 6 and 8 hours. Thermogravimetric Analysis/Differential Thermal Analysis (TGA/DTA), X Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) were used to characterize the powder. Loss of mass and heat flow were seen at TGA/DTA test at 160°C approximately (used as reference of calcination temperature). BFO powder sintered at for 8 hours has no secondary phase, meanwhile for another sintering time (4 and 6 hours) it has Bi2O3 as secondary phase. It is also show at SEM observation result that powder with sintering time of 8 hours has finer grain than of 4 and 6 hours sintering at the same temperature. The grains of BFO powder has heterogenous in size, shape and still agglomerated.

  19. Self-ignition of coal during in-situ gasification. Thermoanalytical investigations. Selbstentzuendung von Kohlen bei der Untertagevergasung. Thermoanalytische Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J O

    1986-01-10

    The underground gasification of deep coal strata via boreholes presupposes flow ways for the gasifying agent and the gasified media with a sufficiently high degree of permeability. Canal burning during countercurrent flow in low depths has been tested as a technical method for linking boreholes and enhancing gas permeability. For the execution of in situ gasification the control or prevention of the spontaneous ignition of the coal under high pressure should not be ignored, because of self-ignition resulting from canal burning in the linking phase. To investigate enthalpy change during the oxidation of coal under various conditions, a device for differential thermal analysis (DTA) was developed and constructed with which temperature development as a result of oxidation in a flowing pressure-gas atmosphere could be observed. A caloric calibration of the device permitted a direct inference of enthalpic difference from differential thermal potential as a measured value. With a regression model for reaction kinetics, the intensity of heat development was linked with kinetic data; this permitted a description of the dependence of the oxidation process on temperature and material concentration. From the interconnections discovered between the carbonization degree and enthalpy change during oxidation we may conclude that the oxidation process is controlled by the emergence of thermal decomposition products. The heat tonality diagram of the DTA of coal oxidation can be divided into three phases and interpreted in connection with the different degrees of carbonization. The results of the investigation reveal that inactivation of the coal before the actual process of linking is of considerable importance. (MOS).

  20. Insight to the Thermal Decomposition and Hydrogen Desorption Behaviors of NaNH2-NaBH4 Hydrogen Storage Composite.

    Science.gov (United States)

    Pei, Ziwei; Bai, Ying; Wang, Yue; Wu, Feng; Wu, Chuan

    2017-09-20

    The lightweight compound material NaNH 2 -NaBH 4 is regarded as a promising hydrogen storage composite due to the high hydrogen density. Mechanical ball milling was employed to synthesize the composite NaNH 2 -NaBH 4 (2/1 molar ratio), and the samples were investigated utilizing thermogravimetric-differential thermal analysis-mass spectroscopy (TG-DTA-MS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) analyses. The full-spectrum test (range of the ratio of mass to charge: 0-200) shows that the released gaseous species contain H 2 , NH 3 , B 2 H 6 , and N 2 in the heating process from room temperature to 400 °C, and possibly the impurity gas B 6 H 12 also exists. The TG/DTA analyses show that the composite NaNH 2 -NaBH 4 (2/1 molar ratio) is conductive to generate hydrogen so that the dehydrogenation process can be finished before 400 °C. Moreover, the thermal decomposition process from 200 to 400 °C involves two-step dehydrogenation reactions: (1) Na 3 (NH 2 ) 2 BH 4 hydride decomposes into Na 3 BN 2 and H 2 (200-350 °C); (2) remaining Na 3 (NH 2 ) 2 BH 4 reacts with NaBH 4 and Na 3 BN 2 , generating Na, BN, NH 3 , N 2 , and H 2 (350-400 °C). The better mechanism understanding of the thermal decomposition pathway lays a foundation for tailoring the hydrogen storage performance of the composite complex hydrides system.