WorldWideScience

Sample records for dry storage

  1. Inspection of Used Fuel Dry Storage Casks

    Energy Technology Data Exchange (ETDEWEB)

    Dennis C. Kunerth; Tim McJunkin; Mark McKay; Sasan Bakhtiari

    2012-09-01

    ABSTRACT The U.S. Nuclear Regulatory Commission (NRC) regulates the storage of used nuclear fuel, which is now and will be increasingly placed in dry storage systems. Since a final disposition pathway is not defined, the fuel is expected to be maintained in dry storage well beyond the time frame originally intended. Due to knowledge gaps regarding the viability of current dry storage systems for long term use, efforts are underway to acquire the technical knowledge and tools required to understand the issues and verify the integrity of the dry storage system components. This report summarizes the initial efforts performed by researchers at Idaho National Laboratory and Argonne National Laboratory to identify and evaluate approaches to in-situ inspection dry storage casks. This task is complicated by the design of the current storage systems that severely restrict access to the casks.

  2. Evolution of spent fuel dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Standring, Paul Nicholas [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Fuel Cycle and Waste Technology; Takats, Ferenc [TS ENERCON KFT, Budapest (Hungary)

    2016-11-15

    Around 10,000 tHM of spent fuel is discharged per year from the nuclear power plants in operation. Whilst the bulk of spent fuel is still held in at reactor pools, 24 countries have developed storage facilities; either on the reactor site or away from the reactor site. Of the 146 operational AFR storage facilities about 80 % employ dry storage; the majority being deployed over the last 20 years. This reflects both the development of dry storage technology as well as changes in politics and trading relationships that have affected spent fuel management policies. The paper describes the various approaches to the back-end of the nuclear fuel cycle for power reactor fuels and provides data on deployed storage technologies.

  3. Macstor dry spent fuel storage system

    Energy Technology Data Exchange (ETDEWEB)

    Pare, F. E. [Atomic Energy of Canada Limited, Montreal (Canada)

    1996-04-15

    AECL, a Canadian Grown Corporation established since 1952, is unique among the world's nuclear organizations. It is both supplier of research reactors and heavy water moderated CANDU power reactors as well as operator of extensive nuclear research facilities. As part of its mandate, AECL has developed products and conceptual designs for the short, intermediate and long term storage and disposal of spent nuclear fuel. AECL has also assumed leadership in the area of dry storage of spent fuel. This Canadian Crown Corporation first started to look into dry storage for the management of its spent nuclear fuel in the early 1970's. After developing silo-like structures called concrete canisters for the storage of its research reactor enriched uranium fuel, AECL went on to perfect that technology for spent CANDU natural uranium fuel. In 1989 AECL teamed up with Trans nuclear, Inc.,(TN), a US based member of the international Trans nuclear Group, to extend its dry storage technology to LWR spent fuel. This association combines AECL's expertise and many years experience in the design of spent fuel storage facilities with TN's proven capabilities of processing, transportation, storage and handling of LWR spent fuel. From the early AECL-designed unventilated concrete canisters to the advanced MACSTOR concept - Modular Air-Cooled Canister Storage - now available also for LWR fuel - dry storage is proving to be safe, economical, practical and, most of all, well accepted by the general public. AECL's experience with different fuels and circumstances has been conclusive.

  4. Methane storage in dry water gas hydrates.

    Science.gov (United States)

    Wang, Weixing; Bray, Christopher L; Adams, Dave J; Cooper, Andrew I

    2008-09-03

    Dry water stores 175 v(STP)/v methane at 2.7 MPa and 273.2 K in a hydrate form which is close to the Department of Energy volumetric target for methane storage. Dry water is a silica-stabilized free-flowing powder (95% wt water), and fast methane uptakes were observed (90% saturation uptake in 160 min with no mixing) as a result of the relatively large surface-to-volume ratio of this material.

  5. Improved Food Drying and Storage Training Manual.

    Science.gov (United States)

    Zweig, Peter R.; And Others

    This manual is intended to serve as a guide for those who are helping future Peace Corps volunteers to acquire basic food drying and storage skills. Included in the guide are lesson outlines and handouts for use in each of the 30 sessions of the course. Representative topics discussed in the individual sessions are scheduling, solar dryers,…

  6. Dry Well Storage Facility conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    The Dry Well Storage Facility described is assumed to be located adjacent to or near a Spent Fuel Receiving and Packaging Facility and/or a Packaged Fuel Transfer Facility. Performance requirements, quality levels and codes and standards, schedule and methods of performance, special requirements, quality assurance program, and cost estimate are discussed. Appendices on major mechanical equipment and electric power requirements are included.

  7. Summary Report for Capsule Dry Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    JOSEPHSON, W S

    2003-09-04

    There are 1.936 cesium (Cs) and strontium (Sr) capsules stored in pools at the Waste Encapsulation and Storage Facility (WESF). These capsules will be moved to dry storage on the Hanford Site as an interim measure to reduce risk. The Cs/Sr Capsule Dry Storage Project (CDSP) is conducted under the assumption the capsules will eventually be moved to the repository at Yucca Mountain, and the design criteria include requirements that will facilitate acceptance at the repository. The storage system must also permit retrieval of capsules in the event vitrification of the capsule contents is pursued. A cut away drawing of a typical cesium chloride (CsCI) capsule and the capsule property and geometry information are provided in Figure 1.1. Strontium fluoride (SrF{sub 2}) capsules are similar in design to CsCl capsules. Further details of capsule design, current state, and reference information are given later in this report and its references. Capsule production and life history is covered in WMP-16938, Capsule Characterization Report for Capsule Dry Storage Project, and is briefly summarized in Section 5.2 of this report.

  8. Gas storage in "dry water" and "dry gel" clathrates.

    Science.gov (United States)

    Carter, Benjamin O; Wang, Weixing; Adams, Dave J; Cooper, Andrew I

    2010-03-02

    "Dry water" (DW) is a free-flowing powder prepared by mixing water, hydrophobic silica particles, and air at high speeds. We demonstrated recently that DW can be used to dramatically enhance methane uptake rates in methane gas hydrate (MGH). Here, we expand on our initial work, demonstrating that DW can be used to increase the kinetics of formation of gas clathrates for gases other than methane, such as CO(2) and Kr. We also show that the stability of the system toward coalescence can be increased via the inclusion of a gelling agent to form a "dry gel", thus dramatically improving the recyclability of the material. For example, the addition of gellan gum allows effective reuse over at least eight clathration cycles without the need for reblending. DW and its "dry gel" modification may represent a potential platform for recyclable gas storage or gas separation on a practicable time scale in a static, unmixed system.

  9. Existing Condition Analysis of Dry Spent Fuel Storage Technology

    Institute of Scientific and Technical Information of China (English)

    LI Ning; XU Lan; HAO Jian-sheng

    2016-01-01

    As in some domestic nuclear power plants, spent fuel pools near capacity, away-from-reactor type storage should be arranged to transfer spent fuel before the pool capacity is full and the plants can operate in safety. This study compares the features of wet and dry storage technology, analyzes the actualities of foreign dry storage facilities and then introduces structural characteristics of some foreign dry storage cask. Finally, a glance will be cast on the failure of away-from-reactor storage facilities of Pressurized Water Reactor(PWR)to meet the need of spent-fuel storage. Therefore, this study believes dry storage will be a feasible solution to the problem.

  10. Heat Transfer Modeling of Dry Spent Nuclear Fuel Storage Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.Y.

    1999-01-13

    The present work was undertaken to provide heat transfer model that accurately predicts the thermal performance of dry spent nuclear fuel storage facilities. One of the storage configurations being considered for DOE Aluminum-clad Spent Nuclear Fuel (Al-SNF), such as the Material and Testing Reactor (MTR) fuel, is in a dry storage facility. To support design studies of storage options a computational and experimental program has been conducted at the Savannah River Site (SRS). The main objective is to develop heat transfer models including natural convection effects internal to an interim dry storage canister and to geological codisposal Waste Package (WP). Calculated temperatures will be used to demonstrate engineering viability of a dry storage option in enclosed interim storage and geological repository WP and to assess the chemical and physical behaviors of the Al-SNF in the dry storage facilities. The current paper describes the modeling approaches and presents the computational results along with the experimental data.

  11. A present status for dry storage of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Bang, K. S.; Lee, J. C.; Park, H. Y.; Seo, K. S

    2003-04-01

    National policy for management of a spent nuclear fuel does not establish in Korea yet. A storage capacity of a storage pool that is to store the spent nuclear fuel will be exceeded an amount of accumulation from the first Woljin nuclear power plant in 2007. Therefore it is necessary that dry storage facility is secured to store safely the spent nuclear fuel on site of the nuclear power plant until national policy for a back-end spent nuclear fuel cycle is established. In order to store safely spent nuclear fuel, it is important that the present status and technology on dry storage of spent nuclear fuel is looked over. Therefore, the present status on dry storage of spent nuclear fuel was analyzed so as to develop dry storage system and choose a proper dry storage method domestic.

  12. Nondestructive Examination Guidance for Dry Storage Casks

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suter, Jonathan D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lareau, John P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhuge, Jing Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qiao, Hong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Moran, Traci L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-30

    In this report, an assessment of NDE methods is performed for components of NUHOMS 80 and 102 dry storage system components in an effort to assist NRC staff with review of license renewal applications. The report considers concrete components associated with the horizontal storage modules (HSMs) as well as metal components in the HSMs. In addition, the report considers the dry shielded canister (DSC). Scope is limited to NDE methods that are considered most likely to be proposed by licensees. The document, ACI 349.3R, Evaluation of Existing Nuclear Safety-Related Concrete Structures, is used as the basis for the majority of the NDE methods summarized for inspecting HSM concrete components. Two other documents, ACI 228.2R, Nondestructive Test Methods for Evaluation of Concrete in Structures, and ORNL/TM-2007/191, Inspection of Nuclear Power Plant Structure-Overview of Methods and Related Application, supplement the list with additional technologies that are considered applicable. For the canister, the ASME B&PV Code is used as the basis for NDE methods considered, along with currently funded efforts through industry (Electric Power Research Institute [EPRI]) and the U.S. Department of Energy (DOE) to develop inspection technologies for canisters. The report provides a description of HSM and DSC components with a focus on those aspects of design considered relevant to inspection. This is followed by a brief description of other concrete structural components such as bridge decks, dams, and reactor containment structures in an effort to facilitate comparison between these structures and HSM concrete components and infer which NDE methods may work best for certain HSM concrete components based on experience with these other structures. Brief overviews of the NDE methods are provided with a focus on issues and influencing factors that may impact implementation or performance. An analysis is performed to determine which NDE methods are most applicable to specific

  13. Corrosion assessment of dry fuel storage containers

    Energy Technology Data Exchange (ETDEWEB)

    Graves, C.E.

    1994-09-01

    The structural stability as a function of expected corrosion degradation of 75 dry fuel storage containers located in the 200 Area Low-Level Waste Burial Grounds was evaluated. These containers include 22 concrete burial containers, 13 55-gal (208-l) drums, and 40 Experimental Breeder Reactor II (EBR-II) transport/storage casks. All containers are buried beneath at least 48 in. of soil and a heavy plastic tarp with the exception of 35 of the EBR-II casks which are exposed to atmosphere. A literature review revealed that little general corrosion is expected and pitting corrosion of the carbon steel used as the exterior shell for all containers (with the exception of the concrete containers) will occur at a maximum rate of 3.5 mil/yr. Penetration from pitting of the exterior shell of the 208-l drums and EBR-II casks is calculated to occur after 18 and 71 years of burial, respectively. The internal construction beneath the shell would be expected to preclude containment breach, however, for the drums and casks. The estimates for structural failure of the external shells, large-scale shell deterioration due to corrosion, are considerably longer, 39 and 150 years respectively for the drums and casks. The concrete burial containers are expected to withstand a service life of 50 years.

  14. Thermal Analysis of a Dry Storage Concept for Capsule Dry Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    JOSEPHSON, W S

    2003-09-04

    There are 1,936 cesium (Cs) and strontium (Sr) capsules stored in pools at the Waste Encapsulation and Storage Facility (WESF). These capsules will be moved to dry storage on the Hanford Site as an interim measure to reduce risk. The Cs/Sr Capsule Dry Storage Project is conducted under the assumption that the capsules will eventually be moved to the repository at Yucca Mountain, and the design criteria include requirements that will facilitate acceptance at the repository. The storage system must also permit retrieval of capsules in the event that vitrification of the capsule contents is pursued. The Capsule Advisory Panel (CAP) was created by the Project Manager for the Hanford Site Capsule Dry Storage Project (CDSP). The purpose of the CAP is to provide specific technical input to the CDSP; to identify design requirements; to ensure design requirements for the project are conservative and defensible; to identify and resolve emerging, critical technical issues, as requested; and to support technical reviews performed by regulatory organizations, as requested. The CAP will develop supporting and summary documents that can be used as part of the technical and safety bases for the CDSP. The purpose of capsule dry storage thermal analysis is to: (1) Summarize the pertinent thermal design requirements sent to vendors, (2) Summarize and address the assumptions that underlie those design requirements, (3) Demonstrate that an acceptable design exists that satisfies the requirements, (4) Identify key design features and phenomena that promote or impede design success, (5) Support other CAP analyses such as corrosion and integrity evaluations, and (6) Support the assessment of proposed designs. It is not the purpose of this report to optimize or fully analyze variations of postulated acceptable designs. The present evaluation will indicate the impact of various possible design features, but not systematically pursue design improvements obtainable through analysis

  15. Structural Sensitivity of Dry Storage Canisters

    Energy Technology Data Exchange (ETDEWEB)

    Klymyshyn, Nicholas A.; Karri, Naveen K.; Adkins, Harold E.; Hanson, Brady D.

    2013-09-27

    This LS-DYNA modeling study evaluated a generic used nuclear fuel vertical dry storage cask system under tip-over, handling drop, and seismic load cases to determine the sensitivity of the canister containment boundary to these loads. The goal was to quantify the expected failure margins to gain insight into what material changes over the extended long-term storage lifetime could have the most influence on the security of the containment boundary. It was determined that the tip-over case offers a strong challenge to the containment boundary, and identifies one significant material knowledge gap, the behavior of welded stainless steel joints under high-strain-rate conditions. High strain rates are expected to increase the material’s effective yield strength and ultimate strength, and may decrease its ductility. Determining and accounting for this behavior could potentially reverse the model prediction of a containment boundary failure at the canister lid weld. It must be emphasized that this predicted containment failure is an artifact of the generic system modeled. Vendor specific designs analyze for cask tip-over and these analyses are reviewed and approved by the Nuclear Regulatory Commission. Another location of sensitivity of the containment boundary is the weld between the base plate and the canister shell. Peak stresses at this location predict plastic strains through the whole thickness of the welded material. This makes the base plate weld an important location for material study. This location is also susceptible to high strain rates, and accurately accounting for the material behavior under these conditions could have a significant effect on the predicted performance of the containment boundary. The handling drop case was largely benign to the containment boundary, with just localized plastic strains predicted on the outer surfaces of wall sections. It would take unusual changes in the handling drop scenario to harm the containment boundary, such as

  16. Advantages on dry interim storage for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Romanato, L.S. [Centro Tecnologico da Marinha em Sao Paulo, Av. Professor Lineu Prestes 2468, 05508-900 Sao Paulo (Brazil); Rzyski, B.M. [IPEN/ CNEN-SP, 05508-000 Sao Paulo (Brazil)]. e-mail: romanato@ctmsp.mar.mil.br

    2006-07-01

    When the nuclear fuel lose its ability to efficiently create energy it is removed from the core reactor and moved to a storage unit waiting for a final destination. Generally, the spent nuclear fuel (SNF) remains inside concrete basins with water within the reactors facility for the radioactive activity decay. Water cools the generated heat and shields radioactivity emissions. After some period of time in water basins the SNF can be sent to a definitive deposition in a geological repository and handled as radioactive waste or to reprocessing installations, or still wait for a future solution. Meanwhile, SNF remains stored for a period of time in dry or wet installations, depending on the method adopted by the nuclear power plant or other plans of the country. In many SNF wet storage sites the capacity can be fulfilled very quickly. If so, additional area or other alternative storage system should be given. There are many options to provide capacity increase in the wet storage area, but dry storages are worldwide preferred since it reduces corrosion concerns. In the wet storage the temperature and water purity should be constantly controlled whereas in the dry storage the SNF stands protected in specially designed canisters. Dry interim storages are practical and approved in many countries especially that have the 'wait and see' philosophy (wait to see new technologies development). This paper shows the advantages of dry interim storages sites in comparison with the wet ones and the nowadays problems as terrorism. (Author)

  17. Development of dry storage technology of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Maruoka, Kunio [Mitsubishi Heavy Industries Ltd., Yokohama (Japan). Nuclear Energy Systems Engineering Center; Murakami, Kazuo; Yokoyama, Takeshi; Natsume, Tomohiro; Irino, Mitsuhiro

    1998-07-01

    The increasing demand for storage of spent fuel assemblies generated by commercial nuclear power plants is the urgent subject to solve. The dry storage system is as economically more advantageous than the pool storage system, and so, Mitsubishi Heavy Industries, Ltd. has developed the metal storage cask suited to small and medium storage capacity under 2000MTU - 3000MTU. For large scale capacity, the new `Mitsubishi Vault Storage System` has been developed, and it provides a safe and economical solution. Technical study concerning cooling ability was performed. (author)

  18. Standard review plan for dry cask storage systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

  19. Delayed replantation after prolonged dry storage

    Directory of Open Access Journals (Sweden)

    Anita Rao

    2014-01-01

    Full Text Available Management of tooth avulsion in the permanent dentition often presents a challenge. Definitive treatment planning and consultation with specialists is seldom possible at the time of emergency treatment. Replantation of the avulsed tooth can restore esthetic appearance and occlusal function shortly after the injury. This article describes the management of a patient with an avulsed maxillary permanent incisor that had been air-dried for about 40 h. The replanted incisor retained its esthetic appearance and functionality 1 year after replantation, yet the long-term prognosis is not good because of progressive replacement root resorption.

  20. Advantages of dry hardened cask storage over wet storage for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Romanato, Luiz Sergio, E-mail: romanato@ctmsp.mar.mil.b [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil). Dept. da Qualidade

    2011-07-01

    Pools are generally used to store and maintain spent nuclear fuel assemblies for cooling, after removed from reactors. After three to five years stored in the pools, spent fuel can be reprocessed or sent to a final disposition in a geological repository and handled as radioactive waste or sent to another site waiting for future solution. Spent fuel can be stored in dry or wet installations, depending on the method adopted by the nuclear plant. If this storage were exclusively wet, at the installation decommissioning in the future, another solution for storage will need to be found. Today, after a preliminary cooling, the spent fuel assemblies can be removed from the pool and sent to dry hardened storage installations. This kind of storage does not need complex radiation monitoring and it is safer than wet storage. Brazil has two nuclear reactors in operation, a third reactor is under construction and they use wet spent fuel storage . Dry hardened casks use metal or both metal and concrete for radiation shielding and they are safe, especially during an earthquake. An earthquake struck Japan on March 11, 2011 damaging Fukushima Daiichi nuclear power plant. The occurrence of earthquakes in Brazil is very small but dry casks can resist to other events, including terrorist acts, better than pools. This paper shows the advantages of dry hardened cask storage in comparison with the wet storage (water pools) for spent nuclear fuel. (author)

  1. Extending dry storage of spent LWR fuel for 100 years.

    Energy Technology Data Exchange (ETDEWEB)

    Einziger, R. E.

    1998-12-16

    Because of delays in closing the back end of the fuel cycle in the U.S., there is a need to extend dry inert storage of spent fuel beyond its originally anticipated 20-year duration. Many of the methodologies developed to support initial licensing for 20-year storage should be able to support the longer storage periods envisioned. This paper evaluates the applicability of existing information and methodologies to support dry storage up to 100 years. The thrust of the analysis is the potential behavior of the spent fuel. In the USA, the criteria for dry storage of LWR spent fuel are delineated in 10 CFR 72 [1]. The criteria fall into four general categories: maintain subcriticality, prevent the release of radioactive material above acceptable limits, ensure that radiation rates and doses do not exceed acceptable levels, and maintain retrievability of the stored radioactive material. These criteria need to be considered for normal, off-normal, and postulated accident conditions. The initial safety analysis report submitted for licensing evaluated the fuel's ability to meet the requirements for 20 years. It is not the intent to repeat these calculations, but to look at expected behavior over the additional 80 years, during which the temperatures and radiation fields are lower. During the first 20 years, the properties of the components may change because of elevated temperatures, presence of moisture, effects of radiation, etc. During normal storage in an inert atmosphere, there is potential for the cladding mechanical properties to change due to annealing or interaction with cask materials. The emissivity of the cladding could also change due to storage conditions. If there is air leakage into the cask, additional degradation could occur through oxidation in breached rods, which could lead to additional fission gas release and enlargement of cladding breaches. Air in-leakage could also affect cover gas conductivity, cladding oxidation, emissivity changes, and

  2. Extended Dry Storage Signature Bench Scale Detector Conceptual Design

    Energy Technology Data Exchange (ETDEWEB)

    Rauch, Eric Benton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-02

    This report is the conceptual design of a detector based on research within the Extended Dry Storage Signature Development project under the DOE-­NE MPACT campaign. This is the second year of the project; from this year’s positive results, the next step is building a prototype and testing with real materials .

  3. Licensing of spent fuel dry storage and consolidated rod storage: A Review of Issues and Experiences

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, W.J.

    1990-02-01

    The results of this study, performed by Pacific Northwest Laboratory (PNL) and sponsored by the US Department of Energy (DOE), respond to the nuclear industry's recommendation that a report be prepared that collects and describes the licensing issues (and their resolutions) that confront a new applicant requesting approval from the US Nuclear Regulatory Commission (NRC) for dry storage of spent fuel or for large-scale storage of consolidated spent fuel rods in pools. The issues are identified in comments, questions, and requests from the NRC during its review of applicants' submittals. Included in the report are discussions of (1) the 18 topical reports on cask and module designs for dry storage fuel that have been submitted to the NRC, (2) the three license applications for dry storage of spent fuel at independent spent fuel storage installations (ISFSIs) that have been submitted to the NRC, and (3) the three applications (one of which was later withdrawn) for large-scale storage of consolidated fuel rods in existing spent fuel storage pools at reactors that were submitted tot he NRC. For each of the applications submitted, examples of some of the issues (and suggestions for their resolutions) are described. The issues and their resolutions are also covered in detail in an example in each of the three subject areas: (1) the application for the CASTOR V/21 dry spent fuel storage cask, (2) the application for the ISFSI for dry storage of spent fuel at Surry, and (3) the application for full-scale wet storage of consolidated spent fuel at Millstone-2. The conclusions in the report include examples of major issues that applicants have encountered. Recommendations for future applicants to follow are listed. 401 refs., 26 tabs.

  4. The Effects of Drying Methods, Packaging Atmosphere and Storage Time on Dried Pomegranate Aril Quality

    OpenAIRE

    GÖLÜKCÜ, Muharrem

    2015-01-01

    The aim of this work was to evaluate the effects of drying methods, packaging atmosphere, and storage time in preserving the quality of dried pomegranate aril on total phenolic matter, total anthocyanin, antioxidant activity, and CIE L, a*, b*, C, h colour values. The highest contents of phenolic matter (5580 mg kg-1), anthocyanin (679.76 mg kg-1), antioxidant capacity (IC50, 26.16 mg g-1) and CIE a* colour value (10.73) were observed in freeze dried sample, followed by vacuum, convective, an...

  5. Study on vitamin D₂ stability in dried mushrooms during drying and storage.

    Science.gov (United States)

    Sławińska, Aneta; Fornal, Emilia; Radzki, Wojciech; Skrzypczak, Katarzyna; Zalewska-Korona, Marta; Michalak-Majewska, Monika; Parfieniuk, Ewa; Stachniuk, Anna

    2016-05-15

    The main objective of this work was to determine the stability of vitamin D2 in dried mushrooms Agaricus bisporus, Pleurotus ostreatus and Lentinula edodes during storage, as well as to examine the possibility of inducing vitamin D2 production in dried mushrooms by UVB irradiation. After 1.5 year storage of dried mushrooms, the level of vitamin D2 in button mushrooms was found to be 6.90 μg/g dw, which is a 48.32% of initial level of vitamin D2. In the case of dried oyster and shiitake mushrooms there was a decrease to the level of 66.90% and 68.40%, respectively. It was determined that dried mushrooms can produce ergocalciferol under UVB irradiation. The highest content of vitamin D2 was observed in A. bisporus. Freeze-dried A. bisporus contained from 42.08 to 119.21 μg/g dw and hot-air dried mushrooms contained from 21.51 to 81.17 μg/g dw vitamin D2.

  6. Multiple-Angle Muon Radiography of a Dry Storage Cask

    Energy Technology Data Exchange (ETDEWEB)

    Durham, J. Matthew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Guardincerri, Elena [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Morris, Christopher [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Poulson, Daniel Cris [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bacon, Jeffrey Darnell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Morley, Deborah Jean [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Plaud-Ramos, Kenie Omar [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-23

    A partially loaded dry storage cask was imaged using cosmic ray muons. Since the cask is large relative to the size of the muon tracking detectors, the instruments were placed at nine different positions around the cask to record data covering the entire fuel basket. We show that this technique can detect the removal of a single fuel assembly from the center of the cask.

  7. Demonstrating the Safety of Long-Term Dry Storage - 13468

    Energy Technology Data Exchange (ETDEWEB)

    McCullum, Rod [Nuclear Energy Institute, 1201 F St. NW, Washington, DC, 20004 (United States); Brookmire, Tom [Dominion Energy, 5000 Dominion Boulevard Glen Allen, VA 23060 (United States); Kessler, John [Electric Power Research Institute, 1300 West W.T. Harris Boulevard, Charlotte, NC 28262 (United States); Leblang, Suzanne [Entergy, 1340 Echelon Parkway, Jackson, MS 39211 (United States); Levin, Adam [Exelon, 4300 Winfield Road, Warrenville, IL 60555 (United States); Martin, Zita [Tennessee Valley Authority, 1101 Market Street, Chattanooga, TN 37402 (United States); Nesbit, Steve [Duke Energy, 550 South Tryon Street, Charlotte, NC 28202 (United States); Nichol, Marc [Nuclear Energy Institute, 1201 F St. NW Washington DC, 2004 (United States); Pickens, Terry [Xcel Energy, 414 Nicollet Mall, Minneapolis, MN 55401 (United States)

    2013-07-01

    Commercial nuclear plants in the United States were originally designed with the expectation that used nuclear fuel would be moved directly from the reactor pools and transported off site for either reprocessing or direct geologic disposal. However, Federal programs intended to meet this expectation were never able to develop the capability to remove used fuel from reactor sites - and these programs remain stalled to this day. Therefore, in the 1980's, with reactor pools reaching capacity limits, industry began developing dry cask storage technology to provide for additional on-site storage. Use of this technology has expanded significantly since then, and has today become a standard part of plant operations at most US nuclear sites. As this expansion was underway, Federal programs remained stalled, and it became evident that dry cask systems would be in use longer than originally envisioned. In response to this challenge, a strong technical basis supporting the long term dry storage safety has been developed. However, this is not a static situation. The technical basis must be able to address future challenges. Industry is responding to one such challenge - the increasing prevalence of high burnup (HBU) used fuel and the need to provide long term storage assurance for these fuels equivalent to that which has existed for lower burnup fuels over the past 25 years. This response includes a confirmatory demonstration program designed to address the aging characteristics of HBU fuel and set a precedent for a learning approach to aging management that will have broad applicability across the used fuel storage landscape. (authors)

  8. Viability of Existing INL Facilities for Dry Storage Cask Handling

    Energy Technology Data Exchange (ETDEWEB)

    Randy Bohachek; Charles Park; Bruce Wallace; Phil Winston; Steve Marschman

    2013-04-01

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INL’s Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  9. Viability of Existing INL Facilities for Dry Storage Cask Handling

    Energy Technology Data Exchange (ETDEWEB)

    Bohachek, Randy; Wallace, Bruce; Winston, Phil; Marschman, Steve

    2013-04-30

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INL’s Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  10. Dry spent fuel storage with the MACSTOR system

    Energy Technology Data Exchange (ETDEWEB)

    Pare, F. [Atomic Energy of Canada Ltd., Montreal, PQ (Canada). CANDU Operations

    1996-10-01

    Atomic Energy of Canada Limited (AECL), and Transnuclear Inc. (TNI) began in 1989 the development of the concrete spent fuel storage system, called MACSTOR (Modular Air-Cooled Canister STORage) for use with LWR spent fuel assemblies. It is a hybrid system which combines the operational economies of metal cask technology with the capital economies of concrete technology. The MACSTOR Module is a monolithic, shielded concrete vault structure that can accommodate up to 20 spent fuel canisters. Each canister typically holds up to 21 PWR or 44 BWR spent fuel assemblies with a nominal fuel burn up rate of 40,000 MWD/MTU and a 7 year minimum cooling period. The structure is passively cooled by natural convection through an array of inlet and outlet gratings and galleries serving a central plenum where the (vertically) stored canisters are located. The canisters are continuously monitored by means of a pressure monitoring system developed by TNI. Thus, the utility can be assured of both positive cooling of the fuel and verification of the integrity of the fuel confinement boundary. The structure is seismically designed and is capable of withstanding site design basis accident events. The MACSTOR system includes the storage module(s), an overhead gantry system for cask handling, a transfer cask for moving fuel from wet to dry storage and a cask transporter. The canister and transfer cask designs are based on Transnuclear transport cask designs and proven hot cell transfer cask technology, adapted to requirements for on-site spent fuel storage. The MACSTOR system can economically address a wide range of storage capacity requirements. The modular concept allows for flexibility in determining each module`s capacity. Starting with 8 canisters, the capacity can be increased by increments of 4 up to 20 canisters. The MACSTOR system is also flexible in accommodating the various spent fuel types from such reactors as VVER-440, VVER-1000 and RBMK 1500. (J.P.N.)

  11. Development of a rapid screening protocol for selection of strains resistant to spray drying and storage in dry powder.

    Science.gov (United States)

    Reimann, S; Grattepanche, F; Baggenstos, C; Rezzonico, E; Berger, B; Arigoni, F; Lacroix, C

    2010-06-01

    An efficient screening method for selection of Bifidobacterium longum strains resistant to spray drying and storage was developed based on randomly amplified polymorphic DNA (RAPD) for identification of the best survivors in mixed strains bacterial preparations. Three different primers were used to generate RAPD profiles of 22 B. longum strains. All strains were distinguished according to their RAPD profiles except for the strain NCC2705 and its H(2)O(2) resistant derivative variant. The 22 strains were grouped in 3 batches of 7, 7 and 8 strains and subjected to spray drying and storage at 30 and 37 °C under anaerobic conditions. Batch survival rates after spray drying reached 17.1±4.4%. Strains showing the highest prevalence and/or resistance to storage at 37 °C were selected from individual batches for subsequent spray drying and storage testing. After 67 days of storage, NCC572 was identified as the dominant strain in powder. The stability of strain NCC572 was confirmed by performing single spray drying and storage tests. Out of 22 B. longum strains, a robust strain was identified by combining RAPD with a simultaneous screening test for survival under spray drying and storage. The method allowed a fast screening of B. longum strains in mixture for resistance to spray drying and storage compared to traditional screening procedures carried out with individual strains, in the same conditions. This approach could be applied to other stress conditions.

  12. Thermoelectric Powered Wireless Sensors for Dry-Cask Storage

    Science.gov (United States)

    Carstens, Thomas Alan

    This study focuses on the development of self-powered wireless sensors. These sensors can be used to measure key parameters in extreme environments; e.g., temperature monitoring for spent nuclear fuel during dry-cask storage. This study has developed a design methodology for these self-powered monitoring systems. The main elements that constitute this work consist of selecting and testing a power source for the wireless sensor, determination of the attenuation of the wireless signal, and testing the wireless sensor circuitry in an extreme environment. OrigenArp determined the decay heat and gamma/neutron source strength of the spent fuel throughout the service life of the dry-cask. A first principles analysis modeled the temperatures inside the dry-cask. A finite-element heat transfer code calculated the temperature distribution of the thermoelectric and heat sink. The temperature distributions determine the power produced by the thermoelectric. It was experimentally verified that a thermoelectric generator (HZ-14) with a DC/DC converter (Linear Technology LTC3108EDE) can power a transceiver (EmbedRF) at condition which represent prototypical conditions throughout and beyond the service life of the dry-cask. The wireless sensor is required to broadcast with enough power to overcome the attenuation from the dry-cask. It will be important to minimize the attenuation of the signal in order to broadcast with a small transmission power. To investigate the signal transmission through the dry-cask, CST Microwave Studio was used to determine the scattering parameter S2,1 for a horizontal dry-cask. Important parameters that can influence the transmission of the signal are antenna orientation, antenna placement, and transmission frequency. The thermoelectric generator, DC/DC converter, and transceiver were exposed to 60Co gamma radiation (exposure rate170.3 Rad/min) at the University of Wisconsin Medical Radiation Research Center. The effects of gamma radiation on the

  13. Effect of drying, freezing and storage of dried and frozen onion (Allium cepa L. on its pungency

    Directory of Open Access Journals (Sweden)

    Marcin Horbowicz

    2013-12-01

    Full Text Available The paper contains results of studies of drying and freezing effects, as well as storage of dried and frozen onion on its pungency. The effect of onion bulbs preparation on pungency was estimated as well. The pungency measurements were based on determination of pyruvate produced enzymatically by alliinase. Storage at 20°C of skinned onion decreases sligthly pungency, however three weeks storage at 0-2°C did not change it. Other results indicate that freezing at -25°C, and followed thawing led to large losses - reaching 75% of pungency found in the onion taken to the process. Storage of the frozen onion caused further decrease its pungency. Decrease of pungency during drying was depended on temperature of the process. Low drying temperature (40 and 50°C, 20 hours caused only 15-20% decline of pungency. Higher temperature drying (60°C resulted in 50% losses of onion pungency.

  14. Seismic Performance of Dry Casks Storage for Long- Term Exposure

    Energy Technology Data Exchange (ETDEWEB)

    Ibarra, Luis [Univ. of Utah, Salt Lake City, UT (United States); Sanders, David [Univ. of Nevada, Reno, NV (United States); Yang, Haori [Oregon State Univ., Corvallis, OR (United States); Pantelides, Chris [Univ. of Utah, Salt Lake City, UT (United States)

    2016-12-30

    The main goal of this study is to evaluate the long-term seismic performance of freestanding and anchored Dry Storage Casks (DSCs) using experimental tests on a shaking table, as well as comprehensive numerical evaluations that include the cask-pad-soil system. The study focuses on the dynamic performance of vertical DSCs, which can be designed as free-standing structures resting on a reinforced concrete foundation pad, or casks anchored to a foundation pad. The spent nuclear fuel (SNF) at nuclear power plants (NPPs) is initially stored in fuel-storage pools to control the fuel temperature. After several years, the fuel assemblies are transferred to DSCs at sites contiguous to the plant, known as Interim Spent Fuel Storage Installations (ISFSIs). The regulations for these storage systems (10 CFR 72) ensure adequate passive heat removal and radiation shielding during normal operations, off-normal events, and accident scenarios. The integrity of the DSCs is important, even if the overpack does not breach, because eventually the spent fuel-rods need to be shipped either to a reprocessing plant or a repository. DSCs have been considered as a temporary storage solution, and usually are licensed for 20 years, although they can be relicensed for operating periods of up to 60 years. In recent years, DSCs have been reevaluated as a potential mid-term solution, in which the operating period may be extended for up to 300 years. At the same time, recent seismic events have underlined the significant risks DSCs are exposed. The consideration of DCSs for storing spent fuel for hundreds of years has created new challenges. In the case of seismic hazard, longer-term operating periods not only lead to larger horizontal accelerations, but also increase the relative effect of vertical accelerations that usually are disregarded for smaller seismic events. These larger seismic demands could lead to casks sliding and tipping over, impacting the concrete pad or adjacent casks. The casks

  15. ACR fuel storage analysis: finite element heat transfer analysis of dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Khair, K.; Baset, S.; Millard, J. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada)

    2006-07-01

    Over the past decade Atomic Energy of Canada Limited (AECL) has designed and licensed air-cooled concrete structures used as above ground dry storage containers (MACSTOR) to store irradiated nuclear fuel from CANDU plants. A typical MACSTOR 200 module is designed to store 12,000 bundles in 20 storage cylinders. MACSTOR 200 modules are in operation at Gentilly-2 in Canada and at Cernavoda in Romania. The MACSTOR module is cooled passively by natural convection and by conduction through the concrete walls and roof. Currently AECL is designing the Advanced Candu Reactor (ACR) with CANFLEX slightly enriched uranium fuel to be used. AECL has initiated a study to explore the possibility of storing the irradiated nuclear fuel from ACR in MACSTOR modules. This included work to consider ways of minimizing footprint both in the spent fuel storage bay and in the dry storage area. The commercial finite element code ANSYS has been used in this study. The FE model is used to complete simulations with the higher heat source using the same concrete structural dimensions to assess the feasibility of using the MACSTOR design for storing the ACR irradiated fuel. This paper presents the results of the analysis. The results are used to confirm the possibility of using, with minimal changes to the design of the storage baskets and the structure, the proven design of the MACSTOR 200 containment to store the ACR fuel bundles with higher enrichment and burnup. This has thus allowed us to confirm conceptual feasibility and move on to investigation of optimization. (author)

  16. Safety aspects of dry spent fuel storage and spent fuel management

    Energy Technology Data Exchange (ETDEWEB)

    Botsch, Wolfgang; Smalian, Silva; Hinterding, Peter [TUV NORD EnSys Hannover, GmbH and Co. KG, Hanover (Germany); Volzke, Holger; Wolff, Dietmar; Kasparek, Eva-Maria [BAM Federal Institute for Materials Research and Testing, Berlin (Germany)

    2013-07-01

    As with the storage of all radioactive materials, the storage of spent nuclear fuel (SF) and high-level radioactive waste (HLW) must conform to safety requirements. Safety aspects like safe enclosure of radioactive materials, safe removal of decay heat, nuclear criticality safety and avoidance of unnecessary radiation exposure must be achieved throughout the storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. After the events of Fukushima, the advantages of passively and inherently safe dry storage systems have become more obvious. TUV and BAM, who work as independent experts for the competent authorities, present the licensing process for sites and casks and inform about spent nuclear fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields. All safety relevant issues like safe enclosure, shielding, removal of the decay heat or behavior of cask and building under accident conditions are checked and validated with state-of-the-art methods and computer codes before the license approval. It is shown how dry storage systems can ensure the compliance with the mentioned safety criteria over a long storage period. Exemplarily, the process of licensing, erection and operation of selected German dry storage facilities is presented. (authors)

  17. Effect of drying, freezing and storage of dried and frozen onion (Allium cepa L.) on its pungency

    OpenAIRE

    Marcin Horbowicz; Józef Bąkowski

    2013-01-01

    The paper contains results of studies of drying and freezing effects, as well as storage of dried and frozen onion on its pungency. The effect of onion bulbs preparation on pungency was estimated as well. The pungency measurements were based on determination of pyruvate produced enzymatically by alliinase. Storage at 20°C of skinned onion decreases sligthly pungency, however three weeks storage at 0-2°C did not change it. Other results indicate that freezing at -25°C, and followed thawing led...

  18. Initial evaluation of dry storage issues for spent nuclear fuels in wet storage at the Idaho Chemical Processing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, R J; Johnson, Jr, A B; Lund, A L; Gilbert, E R [and others

    1996-07-01

    The Pacific Northwest Laboratory has evaluated the basis for moving selected spent nuclear fuels in the CPP-603 and CPP-666 storage pools at the Idaho Chemical Processing Plant from wet to dry interim storage. This work is being conducted for the Lockheed Idaho Technologies Company as part of the effort to determine appropriate conditioning and dry storage requirements for these fuels. These spent fuels are from 22 test reactors and include elements clad with aluminum or stainless steel and a wide variety of fuel materials: UAl{sub x}, UAl{sub x}-Al and U{sub 3}O{sub 8}-Al cermets, U-5% fissium, UMo, UZrH{sub x}, UErZrH, UO{sub 2}-stainless steel cermet, and U{sub 3}O{sub 8}-stainless steel cermet. The study also included declad uranium-zirconium hydride spent fuel stored in the CPP-603 storage pools. The current condition and potential failure mechanisms for these spent fuels were evaluated to determine the impact on conditioning and dry storage requirements. Initial recommendations for conditioning and dry storage requirements are made based on the potential degradation mechanisms and their impacts on moving the spent fuel from wet to dry storage. Areas needing further evaluation are identified.

  19. OVERVIEW OF CRITERIA FOR INTERIM WET & DRY STORAGE OF RESEARCH REACTOR SPENT NUCLEAR FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R.; Vinson, D.; Iyer, N.; Fisher, D.

    2010-11-03

    Following discharge from research reactors, spent nuclear fuel may be stored 'wet' in water pools or basins, or it may be stored 'dry' in various configurations including non-sealed or sealed containers until retrieved for ultimate disposition. Interim safe storage practices are based on avoiding degradation to the fuel that would impact functions related to safety. Recommended practices including environmental controls with technical bases, are outlined for wet storage and dry storage of aluminum-clad, aluminum-based research reactor fuel. For wet storage, water quality must be maintained to minimize corrosion degradation of aluminum fuel. For dry storage, vented canister storage of aluminum fuel readily provides a safe storage configuration. For sealed dry storage, drying must be performed so as to minimize water that would cause additional corrosion and hydrogen generation. Consideration must also be given to the potential for radiolytically-generated hydrogen from the bound water in the attendant oxyhydroxides on aluminum fuel from reactor operation for dry storage systems.

  20. Modeling the Survival of Escherichia coli O157:H7 During Fermentation, Drying, and Storage of a Soudjouk-Style Fermented Dry or Semi-Dry Sausage

    Science.gov (United States)

    Cases of foodborne illness have been linked to the consumption of fermented dry or semi-dry sausages (FDSS) contaminated with Escherichia coli O157:H7. The purpose of this study was to model the inactivation of E. coli O157:H7 during FDSS manufacturing and storage. Beef batter (20% fat) containing...

  1. Influence of drying and storage on lipid and carotenoid stability of the microalga Phaeodactylum tricornutum.

    Science.gov (United States)

    Ryckebosch, Eline; Muylaert, Koenraad; Eeckhout, Mia; Ruyssen, Tony; Foubert, Imogen

    2011-10-26

    The influence of short-term storage and spray- and freeze-drying of fresh microalgal paste on the stability of lipids and carotenoids of Phaeodactylum tricornutum was investigated. Furthermore, the effects of storage time (14 and 35 days) and condition (vacuum packed vs non vacuum packed, -20 °C vs 4 °C vs 20 °C) after spray- and freeze-drying were studied. Total lipid content, free fatty acid content, carotenoid content and degree of lipid oxidation were measured. No effects of spray- and freeze-drying and subsequent storage were found on total lipid content, except for short-term storage of the fresh microalgal paste, which led to pronounced lipolysis and therefore a lower total lipid content. Freeze-dried microalgae were found to be more susceptible to lipolysis upon storage than spray-dried microalgae. On the other hand, spray-dried microalgae were more susceptible to oxidation than freeze-dried microalgae, possibly due to breakdown of protecting carotenoids upon spray-drying. Hardly any effect of storage condition was observed for any of the parameters tested.

  2. Drying and storage effects on poly(ethylene glycol) hydrogel mechanical properties and bioactivity.

    Science.gov (United States)

    Luong, P T; Browning, M B; Bixler, R S; Cosgriff-Hernandez, E

    2014-09-01

    Hydrogels based on poly(ethylene glycol) (PEG) are increasingly used in biomedical applications because of their ability to control cell-material interactions by tuning hydrogel physical and biological properties. Evaluation of stability after drying and storage are critical in creating an off-the-shelf biomaterial that functions in vivo according to original specifications. However, there has not been a study that systematically investigates the effects of different drying conditions on hydrogel compositional variables. In the first part of this study, PEG-diacrylate hydrogels underwent common processing procedures (vacuum-drying, lyophilizing, hydrating then vacuum-drying), and the effect of this processing on the mechanical properties and swelling ratios was measured. Significant changes in compressive modulus, tensile modulus, and swelling ratio only occurred for select processed hydrogels. No consistent trends were observed after processing for any of the formulations tested. The effect of storage conditions on cell adhesion and spreading on collagen- and streptococcal collagen-like protein (Scl2-2)-PEG-diacrylamide hydrogels was then evaluated to characterize bioactivity retention after storage. Dry storage conditions preserved bioactivity after 6 weeks of storage; whereas, storage in PBS significantly reduced bioactivity. This loss of bioactivity was attributed to ester hydrolysis of the protein linker, acrylate-PEG-N-hydroxysuccinimide. These studies demonstrate that these processing methods and dry storage conditions may be used to prepare bioactive PEG hydrogel scaffolds with recoverable functionality after storage.

  3. Loss of selenium in drying and storage of agronomic plant species

    DEFF Research Database (Denmark)

    Nielsen, Gunnar Gissel

    1970-01-01

    In two experiments with Se75, loss of selenium from agricultural species was noted during both drying and storage. The loss of selenium during drying was to some extent overshadowed by the influence of self-absorption caused by the water in the fresh material. The results showed that even plant...... material of non-indicator plantslose volatile selenium at drying temperatures of 60°C or higher, and in some cases even at temperatures below 60°C. The results also showed that storage as briquettes gives the lowest storage loss of selenium....

  4. Evaluation of safety margins during dry storage of CANDU fuel in MACSTOR/KN-400 module

    Energy Technology Data Exchange (ETDEWEB)

    Beaudoin, R.; Shill, R. [Atomic Energy Of Canada Limited, Montreal, Quebec (Canada); Lee, K.-H.; Chung, S.-H.; Yoon, J.-H.; Choi, B.-I.; Lee, H.-Y.; Song, M.-J. [KHNP, Nuclear Environment Technology Inst., Taejon (Korea, Republic of)

    2005-03-15

    This paper covers an evaluation of the available safety margin against fuel bundle degradation during dry storage of CANDU spent fuel bundles in a MACSTOR/KN-400 module, considering normal, off-normal and postulated accidental conditions. (author)

  5. Evaluation of Corrosion of Aluminum Based Reactor Fuel Cladding Materials During Dry Storage

    Energy Technology Data Exchange (ETDEWEB)

    Peacock, H.B. Jr.

    1999-10-21

    This report provides an evaluation of the corrosion behavior of aluminum cladding alloys and aluminum-uranium alloys at conditions relevant to dry storage. The details of the corrosion program are described and the results to date are discussed.

  6. Cooling Performance Evaluation of the Hybrid Heat Pipe for Spent Nuclear Fuel Dry Storage Cask

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Yeong Shin; Bang, In Cheol [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    To evaluate the concept of the cooling device, 2-step CFD analysis was conducted for the cooling performance of hybrid heat pipe, which consists of single fuel assembly model and full scope dry cask model. As a passive cooling device of the metal cask for dry storage of spent nuclear fuel, hybrid heat pipe was applied to DPC developed in Korea. Hybrid heat pipe is the heat pipe containing neutron absorber can be used as a passive cooling in nuclear application with both decay heat removal and control the reactivity. In this study, 2-step CFD analysis was performed to find to evaluate the heat pipe-based passive cooling system for the application to the dry cask. Only spent fuel pool cannot satisfy the demands for high burnup fuel and large amount of spent fuel. Therefore, it is necessary to prepare supplement of the storage facilities. As one of the candidate of another type of storage, dry storage method have been preferred due to its good expansibility of storage capacity and easy long-term management. Dry storage uses the gas or air as coolant with passive cooling and neutron shielding materials was used instead of water in wet storage system. It is relatively safe and emits little radioactive waste for the storage. As short term actions for the limited storage capacity of spent fuel pool, it is considered to use dry interim/long term storage method to increase the capacity of spent nuclear fuel storage facilities. For 10-year cooled down spent fuel in the pool storage, fuel rod temperature inside metal cask is expected over 250 .deg. C in simulation. Although it satisfied the criteria that cladding temperature of the spent fuel should keep under 400 .deg. C during storage period, high temperature inside cask can accelerate the thermal degradation of the structural materials consisting metal cask and fuel assembly as well as limitation of the storage capacity of metal cask. In this paper, heat pipe-based cooling device for the dry storage cask was suggested for

  7. Design requirements of a consolidating dry storage module for CANDU spent fuels

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyung Ho; Yoon, Jeong Hyoun; Yang, Ke Hyung; Choi, Byung Il; Lee, Heung Young [KHNP/NETEC, Taejon (Korea, Republic of); Cho, Gyu Seong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2003-10-01

    This paper presents a technical description of design requirement document covers the requirements of the MACSTOR/KN-400 module, which is under development to densely accommodate CANDU spent fuels with more efficient way. The design requirement is for the module that will be constructed within a dry storage site after successfully licensed by the regulatory body. This temporary outdoor spent fuel dry storage facility provides for safe storage of spent nuclear fuel after it has been removed from the plant's storage pool after being allowed to decay for a period of at least 6 years. The MACSTOR/KN-400 module is being designed to the envelope of site environmental conditions encountered at the Wolsong station. The design requirements of MACSTOR/KN-400 module meets the requirements of the appropriate Codes and Standards for dry storage of spent fuel from nuclear power reactors such as lOCFR72, and Korea Atomic Energy Act and relevant technical standard.

  8. High Burnup Dry Storage Cask Research and Development Project, Final Test Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-02-27

    EPRI is leading a project team to develop and implement the first five years of a Test Plan to collect data from a SNF dry storage system containing high burnup fuel.12 The Test Plan defined in this document outlines the data to be collected, and the storage system design, procedures, and licensing necessary to implement the Test Plan.13 The main goals of the proposed test are to provide confirmatory data14 for models, future SNF dry storage cask design, and to support license renewals and new licenses for ISFSIs. To provide data that is most relevant to high burnup fuel in dry storage, the design of the test storage system must mimic real conditions that high burnup SNF experiences during all stages of dry storage: loading, cask drying, inert gas backfilling, and transfer to the ISFSI for multi-year storage.15 Along with other optional modeling, SETs, and SSTs, the data collected in this Test Plan can be used to evaluate the integrity of dry storage systems and the high burnup fuel contained therein over many decades. It should be noted that the Test Plan described in this document discusses essential activities that go beyond the first five years of Test Plan implementation.16 The first five years of the Test Plan include activities up through loading the cask, initiating the data collection, and beginning the long-term storage period at the ISFSI. The Test Plan encompasses the overall project that includes activities that may not be completed until 15 or more years from now, including continued data collection, shipment of the Research Project Cask to a Fuel Examination Facility, opening the cask at the Fuel Examination Facility, and examining the high burnup fuel after the initial storage period.

  9. Foreign experience on effects of extended dry storage on the integrity of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.; Mitchell, S.J.

    1992-04-01

    This report summarizes the results of a survey of foreign experience in dry storage of spent fuel from nuclear power reactors that was carried out for the US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The report reviews the mechanisms for degradation of spent fuel cladding and fuel materials in dry storage, identifies the status and plans of world-wide experience and applications, and documents the available information on the expected long-term integrity of the dry-stored spent fuel from actual foreign experience. Countries covered in this survey are: Argentina, Canada, Federal Republic of Germany (before reunification with the former East Germany), former German Democratic Republic (former East Germany), France, India, Italy, Japan, South Korea, Spain, Switzerland, United Kingdom, and the former USSR (most of these former Republics are now in the Commonwealth of Independent States [CIS]). Industrial dry storage of Magnox fuels started in 1972 in the United Kingdom; Canada began industrial dry storage of CANDU fuels in 1980. The technology for safe storage is generally considered to be developed for time periods of 30 to 100 years for LWR fuel in inert gas and for some fuels in oxidizing gases at low temperatures. Because it will probably be decades before countries will have a repository for spent fuels and high-level wastes, the plans for expanded use of dry storage have increased significantly in recent years and are expected to continue to increase in the near future.

  10. Foreign experience on effects of extended dry storage on the integrity of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.; Mitchell, S.J.

    1992-04-01

    This report summarizes the results of a survey of foreign experience in dry storage of spent fuel from nuclear power reactors that was carried out for the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The report reviews the mechanisms for degradation of spent fuel cladding and fuel materials in dry storage, identifies the status and plans of world-wide experience and applications, and documents the available information on the expected long-term integrity of the dry-stored spent fuel from actual foreign experience. Countries covered in this survey are: Argentina, Canada, Federal Republic of Germany (before reunification with the former East Germany), former German Democratic Republic (former East Germany), France, India, Italy, Japan, South Korea, Spain, Switzerland, United Kingdom, and the former USSR (most of these former Republics are now in the Commonwealth of Independent States (CIS)). Industrial dry storage of Magnox fuels started in 1972 in the United Kingdom; Canada began industrial dry storage of CANDU fuels in 1980. The technology for safe storage is generally considered to be developed for time periods of 30 to 100 years for LWR fuel in inert gas and for some fuels in oxidizing gases at low temperatures. Because it will probably be decades before countries will have a repository for spent fuels and high-level wastes, the plans for expanded use of dry storage have increased significantly in recent years and are expected to continue to increase in the near future.

  11. Study on effectiveness of continuous solar dryer integrated with desiccant thermal storage for drying cocoa beans

    Directory of Open Access Journals (Sweden)

    Sari Farah Dina

    2015-03-01

    Full Text Available The main objective is to assess effectiveness of continuous solar dryer integrated with desiccant thermal storage for drying cocoa beans. Two type of desiccants were tested, molecular sieve 13× (Na86 [(AlO286·(SiO2106]·264H2O as an adsorbent type and CaCl2 as an absorbent type. The results revealed that during sunshine hours, the maximum temperature within the drying chamber varied from 40 °C to 54 °C. In average, it was 9–12 °C higher than ambient temperature. These temperatures are very suitable for drying cocoa beans. During off-sunshine hours, humidity of air inside the drying chamber was lower than ambient because of the desiccant thermal storage. Drying times for intermittent directs sun drying, solar dryer integrated with adsorbent, and solar dryer integrated with absorbent were 55 h, 41 h, and 30 h, respectively. Specific energy consumptions for direct sun drying, solar dryer integrated with adsorbent, and solar dryer integrated with absorber were 60.4 MJ/kg moist, 18.94 MJ/kg moist, and 13.29 MJ/kg moist, respectively. The main conclusion can be drawn here is that a solar dryer integrated with desiccant thermal storage makes drying using solar energy more effective in term of drying time and specific energy consumption.

  12. Viability of Two Freeze-dried Strains of Bifidobacterium Preparations at Various Temperatures during Prolonged Storage

    Institute of Scientific and Technical Information of China (English)

    DU Peng; DU Li-hui; HUO Gui-cheng

    2005-01-01

    Viability of bifidobacteria in freeze-dried probiotic products at various temperatures during prolonged storage was assessed. Bifidobacterium longum and Bifidobacterium infantis were freeze-dried. The freeze-dried preparations were stored at -18,4, and 20℃. Cell counts were enumerated using BS agar at 37℃ for 48 h under anaerobic conditions at 0, 45 and 120 days. Storage at 20℃ showed the greatest decline in the viability of bifidobacteria, whereas that at -18℃ showed the least decrease.

  13. Effect of storage conditions on compaction behavior of two grades of spray-dried lactose.

    Science.gov (United States)

    Atassi, Faraj; Almaya, Ahmad; Aburub, Aktham

    2008-01-01

    In this work we examine the effect of storage conditions (moisture exposure) on the compression behavior of 2 grades of spray-dried lactose (Pharmatose DCL 11 and Pharmatose DCL 14) under 2 different circumstances. The first was to expose powder samples to moisture, then compress them. The second was to expose precompressed tablets to moisture. We clearly show that the effect of moisture exposure and amorphous content crystallization in spray-dried lactoses on compaction behavior depends on whether this moisture exposure takes place before or after compression. In addition, the impact of storage conditions depends on the grade of spray-dried lactose.

  14. Quality Changes in Dried Tomatoes Stored in Sealed Polythene and Open Storage Systems

    Directory of Open Access Journals (Sweden)

    Bosede Adelola ADERIBIGBE

    2007-01-01

    Full Text Available Studies were conducted to quantify the changes in quality attributes of dried tomatoes during storage using High Density Polythene Film (HDPF and normal (traditional open storage systems. 300g of the dried tomato fruits were packaged in each of the six (6 high-density polythene film (HDPF bags while similar quantities were in open bowls as practiced by the rural processors. Periodic assessment of some quality parameters, microbial loads, moisture content, color, vitamins A and C, and phosphorus were conducted for a period of three months to ascertain how these two storage systems influence the changes in these quality attributes. The results showed that the fungal load counts of the dried samples prior to storage were 3.6·103 cfu/g. After three months of storage, the counts were 5.4·103 cfu/g and 7.2·103 cfu/g for the samples stored in HDPF and open systems respectively. These were significantly different at 5% level of confidence. Vitamin A of the samples changed from the initial value 134μg prior to storage to 98 μg and 103.4 μg after three months of storage in open and HDPF systems respectively. Vitamin C content changed from 5.21 mg/ 100g prior to storage to 3.69 mg/100g and 4.24 mg/100g in the samples stored in open and HDPF systems respectively after three months. The moisture content of the dried sample prior to storage was 4.2%. After three months of storage, the values were 7.13% and 3.93% respectively for samples stored in open and HDPF systems and these were highly significant at 5% level of confidence. The HDPF method gave better results compared to the traditional method of storage in Nigeria as far as these quality parameters assessed are concerned.

  15. Design of spent-fuel concrete pit dry storage and handling system

    Energy Technology Data Exchange (ETDEWEB)

    Tamaki, H.; Natsume, T.; Maruoka, K.; Yokoyama, T. [Mitsubishi Heavy Industries Ltd., Yokohama (Japan)

    1998-07-01

    An advanced dry storage system design with highly improved storage efficiency of spent nuclear fuel has been developed. The new concept 'Concrete Pit Dry Storage System' realizes a safe and economical solution to an increasing demand of storing spent fuel assemblies (SFAs) generated from commercial nuclear power reactors. The system is basically composed of a large mass concrete module which has densely arranged pit boreholes, sealed canisters containing spent fuel assemblies and a canister handling system. The system is characterized by the following advantages compared with the existing concrete module type storage systems: higher storage efficiency can be achieved by the storage module filled with concrete which also gives a high shielding performance; simple handling technology is used for transfer and installation of the canisters at the storage facility as well as the transport cask of the canisters, surface contamination of the canister is prevented; lower radiation around the storage area is provided to reduce radiation exposure during handling and storage; high structural integrity of the facility is maintained by the concrete module with a simple construction ; the ventilation gallery introducing cooling air air to the bit borehole has an enough draft height to improve cooling performance of the system; a result of the design concept, the storage system can store higher burn-up SFAs with a short cooling period. (authors)

  16. Basic Considerations for Dry Storage of Spent Nuclear Fuels and Revisited CFD Thermal Analysis on the Concrete Cask

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Jae Soo [ACT Co. Ltd., Daejeon (Korea, Republic of); Park, Younwon; Song, Sub Lee [BEES Inc., Daejeon (Korea, Republic of); Kim, Hyeun Min [KAIST, Daejeon (Korea, Republic of)

    2016-10-15

    The integrity of storage facility and also of the spent nuclear fuel itself is considered very important. Storage casks can be located in a designated area on a site or in a designated storage building. A number of different designs for dry storage have been developed and used in different countries. Dry storage system was classified into two categories by IAEA. One is container including cask and silo, the other one is vault. However, there is various way of categorization for dry storage system. Dry silo and cask are usually classified separately, so the dry storage system can be classified into three different types. Furthermore, dry cask storage can be categorized into two types based on the type of the materials, concrete cask and metal cask. In this paper, the design characteristics of dry storage cask are introduced and computational fluid dynamics (CFD) based thermal analysis for concrete cask is revisited. Basic principles for dry storage cask design were described. Based on that, thermal analysis of concrete dry cask was introduced from the study of H. M. Kim et al. From the CFD calculation, the temperature of concrete wall was maintained under the safety criteria. From this fundamental analysis, further investigations are expected. For example, thermal analysis on the metal cask, thermal analysis on horizontally laid spent nuclear fuel assemblies for transportation concerns, and investigations on better performance of natural air circulation in dry cask can be promising candidates.

  17. Critical review of creep FRAPCON-3 model under dry storage conditions

    Energy Technology Data Exchange (ETDEWEB)

    Feria, F.; Herranz, L.E. [Unit of Nuclear Safety Research, CIEMAT, Avda. Complutense 22, Madrid, Madrid 28040 (Spain)

    2009-06-15

    There is a general agreement that cladding creep rupture is the most likely and limiting failure mechanism of spent fuel in dry storage compared to other potential mechanisms, like stress corrosion cracking and/or delayed hydride cracking. Nevertheless, occurrence of creep rupture is very improbable since both decay heat and hoop stress tend to decrease throughout dry storage. In spite of this, the current trend to higher burn up levels needs further attention that ensures safe storage of spent fuel irradiated over 45 GWd/MTU. An extensive work has been carried out during the last four decades in the area of in-reactor creep modelling. Unfortunately, the in-reactor conditions are so different from those prevailing under dry storage, that all the experience gained cannot be extrapolated in a straightforward manner. On the other side, as creep tests simulating conditions throughout a 20-40 year dry storage are impractical, post-irradiation cladding creep behaviour has been modelled by means of time-temperature dependent laws developed on the basis of currently available zirconium alloys data. Additionally, some tests have been exploring the effect of irradiation, hydrogen distribution and material composition on the materials creep behaviour. Adaptation of fuel performance codes initially developed for normal and off-normal reactor operation is not an easy task either. Creep modelling is usually dependent of host codes because a good part of its validation and update has been carried out in an integral way, and as a consequence its independent performance assessment is not an easy task. This work examines the current capability of FRAPCON-3 to model creep behaviour under dry storage conditions. To do so, a review of its major fundamentals has been done and its range of applicability discussed. Once its main approximations and drawbacks have been identified, an attempt to overcome some of them has been intended by implementing an alternative expression for creep under

  18. Effect of liquid retentate storage on flavor of spray-dried whey protein concentrate and isolate.

    Science.gov (United States)

    Whitson, M; Miracle, R E; Bastian, E; Drake, M A

    2011-08-01

    The objective of this study was to determine the effects of holding time of liquid retentate on flavor of spray-dried whey proteins: Cheddar whey protein isolate (WPI) and Mozzarella 80% whey protein concentrate (WPC80). Liquid WPC80 and WPI retentate were manufactured and stored at 3°C. After 0, 6, 12, 24, and 48h, the product was spray-dried (2kg) and the remaining retentate held until the next time point. The design was replicated twice for each product. Powders were stored at 21°C and evaluated every 4 mo throughout 12 mo of storage. Flavor profiles of rehydrated proteins were documented by descriptive sensory analysis. Volatile components were analyzed with solid phase microextraction coupled with gas chromatography mass spectrometry. Cardboard flavors increased in both spray-dried products with increased retentate storage time and cabbage flavors increased in WPI. Concurrent with sensory results, lipid oxidation products (hexanal, heptanal, octanal) and sulfur degradation products (dimethyl disulfide, dimethyl trisulfide) increased in spray-dried products with increased liquid retentate storage time, whereas diacetyl decreased. Shelf stability was decreased in spray-dried products from longer retentate storage times. For maximum quality and shelf life, liquid retentate should be held for less than 12h before spray drying.

  19. A study of thermal, structural and shielding safety analysis for dry storage of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Shin, S. H. [Kyungpook Nationl Univ., Daegu (Korea, Republic of)

    1997-03-15

    As a replaced method for MRS, the dry storage has been intensively developed by the advanced countries of nuclear power technology. Currently, the domestic technology for the dry storage is also under development. In the present study, the developed technical standards for USNRC and its operation are summarized. Futhermore, the SAR for VECTRA's NUHOMES satisfied with DOE and NRC's requirements is inversely analyzed and combined with both USNRC's regulatory guide and LLNL's SARS. In the safety analysis of a dry storage, the principal design criteria which identifies the structural and mechanical safety criteria is investigated. Based on the design criteria, hypothetical accident analysis as well as off-normal operation analysis are investigated.

  20. Spent-fuel dry-storage testing at E-MAD (March 1978-March 1982)

    Energy Technology Data Exchange (ETDEWEB)

    Unterzuber, R.; Milnes, R.D.; Marinkovich, B.A.; Kubancsek, G.M.

    1982-09-01

    From March 1978 through March 1982, spent fuel dry storage tests were conducted at the Engine Maintenance, Assembly and Disassembly (E-MAD) facility on the Nevada Test Site to confirm that commercial reactor spent fuel could be encapsulated and passively stored in one or more interim dry storage cell concepts. These tests were: electrically heated drywell, isolated and adjacent drywell, concrete silo, fuel assembly internal temperature measurement, and air-cooled vault. This document presents the test data and results as well as results from supporting test operations (spent fuel calorimetry and canister gas sampling).

  1. Effects of Lower Drying-Storage Temperature on the Ductility of High-Burnup PWR Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M. C. [Argonne National Lab. (ANL), Argonne, IL (United States); Burtseva, T. A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-08-30

    The purpose of this research effort is to determine the effects of canister and/or cask drying and storage on radial hydride precipitation in, and potential embrittlement of, high-burnup (HBU) pressurized water reactor (PWR) cladding alloys during cooling for a range of peak drying-storage temperatures (PCT) and hoop stresses. Extensive precipitation of radial hydrides could lower the failure hoop stresses and strains, relative to limits established for as-irradiated cladding from discharged fuel rods stored in pools, at temperatures below the ductile-to-brittle transition temperature (DBTT).

  2. Comparison of Dry Gas Seasonal Storage with CO2 Storage and Re-Use Potential

    OpenAIRE

    Killerud, Marie

    2013-01-01

    To make large-scale CO2 storage economic, many groups have proposed using CO2in EOR projects to create value for CO2 storage. However, CO2 EOR projectsgenerally require a large and variable supply of CO2 and consequently may requiretemporary storage of CO2 in geological formations. In order to store CO2 atoffshore sites as a source for CO2 EOR projects, the CO2 needs to be extractedfrom a storage site to a certain extent. Alternatively, CO2 EOR projects maybe developed alongside saline aquife...

  3. Comparison of Dry Gas Seasonal Storage with CO2 Storage and Re-Use Potential

    OpenAIRE

    Killerud, Marie

    2013-01-01

    To make large-scale CO2 storage economic, many groups have proposed using CO2in EOR projects to create value for CO2 storage. However, CO2 EOR projectsgenerally require a large and variable supply of CO2 and consequently may requiretemporary storage of CO2 in geological formations. In order to store CO2 atoffshore sites as a source for CO2 EOR projects, the CO2 needs to be extractedfrom a storage site to a certain extent. Alternatively, CO2 EOR projects maybe developed alongside saline aquife...

  4. Effect of buffer systems and disaccharides concentration on Podoviridae coliphage stability during freeze drying and storage.

    Science.gov (United States)

    Dini, C; de Urraza, P J

    2013-06-01

    The aims of this study were to determine the stability of Podoviridae coliphage CA933P during lyophilization and storage in different media, and to establish similarities between the results obtained and those expected through mechanisms described for proteins stabilization during freeze-drying. PBS and SM buffer were assayed as lyophilization media. The effect of inorganic salts concentration as well as the addition of disaccharides on phage stability during freeze-drying and storage was also studied. The addition of low sucrose concentration (0.1 mol l⁻¹) to SM buffer stabilized phage during freezing and drying steps of the lyophilization process, but higher sugar concentrations were detrimental to phage stability during freeze-drying. Sucrose stabilized phage during storage for at least 120 days. The lyoprotective effect of low concentrations of disaccharides during the drying step of the lyophilization of proteins as well as the stabilization of the freeze-dried product in time correlated with the results obtained for phage CA933P.

  5. Simulating thermal behavior of AECL's spent fuel dry storage system with CATHENA

    Energy Technology Data Exchange (ETDEWEB)

    Sabourin, G. [Atomic Energy of Canada Limited, Montreal, PQ (Canada)

    1998-07-01

    This paper documents the comparisons between CATHENA predictions and temperature measurements taken at the Gentilly-2 NPP spent fuel dry storage facility and in a mock--up of a storage basket placed inside a storage cylinder. It also presents CATHENA temperature predictions related to the storage of spent fuel in MACSTOR modules as planned for Ignalina NPP, Lithuania. CATHENA has been chosen because it can simulate many noncondensable gases including air and helium, and because of its great flexibility in the representation of the MACSTOR module geometry. The results of the simulations show good agreement with the experimental measurements. The two comparisons indicate that CATHENA can be used to simulate heat transfer from the fuel to the external air circuit of the spent fuel dry storage system. For the Ignalina MACSTOR module, containing RBMK fuel having higher heat release than typical CANDU fuel, CATHENA predicts that the maximum fuel temperature is expected to be around 240 deg C, giving an acceptable margin below the maximum allowed temperature of 300 deg C. In conclusion, this paper shows that the thermalhydraulic code CATHENA can accurately predict the thermal behavior AECL's air cooled spent fuel dry storage system. (author)

  6. Storage mite contamination of commercial dry dog food in south-eastern Australia.

    Science.gov (United States)

    Hibberson, C E; Vogelnest, L J

    2014-06-01

    To evaluate contamination of unopened and opened stored sources of commercial dry dog food by viable storage mites. Prospective laboratory and field study. Samples were collected from nine brands of previously unopened bags (new bags) of dry food and 20 field sources of stored dry food in homes in Sydney and Canberra, Australia. All samples were initially examined for the presence of mites using a stereo-binocular microscope and then placed in separate filter-paper-sealed containers. Field samples were incubated at an average temperature of 29°C and 78% relative humidity (RH) for 5 weeks and then at average 26°C/83% RH for 8 weeks. Paired new-bag samples were stored under room conditions (average 23°C/47% RH) and controlled incubator conditions (average 26°C/80% RH) for 6 weeks. All samples were thoroughly examined for mites, mite eggs and visible mould once weekly using a stereo-binocular microscope. Storage mites were not visualised in any of the field samples or in new-bag samples stored at room temperature. Storage mites, identified as Tyrophagus putrescentiae, were visualised in increasing numbers in seven of nine new-bag samples after incubation, with first mites and then eggs evident after 3 weeks of incubation. We confirmed the presence of viable storage mites in a range of previously unopened commercial dry dog foods in Australia and confirmed the possibility of heavy storage mite contamination for dry food stored under conditions of moderate temperature and high humidity. These findings have relevance to storage mite and/or dust mite sensitivity in canine atopic dermatitis. © 2014 Australian Veterinary Association.

  7. Modelling moisture content and dry matter loss during storage of logging residues for energy

    Energy Technology Data Exchange (ETDEWEB)

    Filbakk, Tore; Hoeiboe, Olav Albert (Dept. of Ecology and Natural Resource Management, Norwegian Univ. of Life Sciences, Aas (Norway)); Dibdiakova, Janka (Norwegian Forest and Landscape Inst., Aas (Norway)); Nurmi, Juha (Finnish Forest Research Inst., Kannus (Finland))

    2011-04-15

    To achieve optimal utilisation of logging residues for energy, it is important to know how different handling and storage methods affect fuel properties. The aim of this study was to model how the moisture content and dry matter losses of logging residues develop during storage. Logging residues were collected from five different stands of spruce and pine during different seasons of the year and stored in the same location. The logging residues were stored in covered piles of bundled residues and loose residues. Only minor differences were found in the moisture content profiles between piles of bundles and loose residues. Logging residues located in the centre of both types of piles had considerably lower moisture content than the outer parts. The moisture content significantly affected dry matter loss, with the highest dry matter losses being found in the samples with the least favourable drying conditions. The dry matter losses varied between 1 and 3% per month. Significantly higher dry matter losses were found in the spruce bundles than in the pine bundles. Seasoned logging residues had the lowest dry matter loss, while the logging residues harvested and piled in the autumn had the highest loss

  8. Safeguards-by-Design: Guidance for Independent Spent Fuel Dry Storage Installations (ISFSI)

    Energy Technology Data Exchange (ETDEWEB)

    Trond Bjornard; Philip C. Durst

    2012-05-01

    This document summarizes the requirements and best practices for implementing international nuclear safeguards at independent spent fuel storage installations (ISFSIs), also known as Away-from- Reactor (AFR) storage facilities. These installations may provide wet or dry storage of spent fuel, although the safeguards guidance herein focuses on dry storage facilities. In principle, the safeguards guidance applies to both wet and dry storage. The reason for focusing on dry independent spent fuel storage installations is that this is one of the fastest growing nuclear installations worldwide. Independent spent fuel storage installations are typically outside of the safeguards nuclear material balance area (MBA) of the reactor. They may be located on the reactor site, but are generally considered by the International Atomic Energy Agency (IAEA) and the State Regulator/SSAC to be a separate facility. The need for this guidance is becoming increasingly urgent as more and more nuclear power plants move their spent fuel from resident spent fuel ponds to independent spent fuel storage installations. The safeguards requirements and best practices described herein are also relevant to the design and construction of regional independent spent fuel storage installations that nuclear power plant operators are starting to consider in the absence of a national long-term geological spent fuel repository. The following document has been prepared in support of two of the three foundational pillars for implementing Safeguards-by-Design (SBD). These are: i) defining the relevant safeguards requirements, and ii) defining the best practices for meeting the requirements. This document was prepared with the design of the latest independent dry spent fuel storage installations in mind and was prepared specifically as an aid for designers of commercial nuclear facilities to help them understand the relevant international requirements that follow from a country’s safeguards agreement with

  9. Size and molecular flexibility of sugars determine the storage stability of freeze-dried proteins

    NARCIS (Netherlands)

    Tonnis, W. F.; Mensink, M. A.; de Jager, A.; Maarschalk, K. van der Voort; Frijlink, H. W.; Hinrichs, W. L. J.

    2015-01-01

    Protein-based biopharmaceuticals are generally produced as aqueous solutions and stored refrigerated to obtain sufficient shelf life. Alternatively, proteins may be freeze-dried in the presence of sugars to allow storage stability at ambient conditions for prolonged periods. However, to act as a sta

  10. Formation dry-out and injectivity impairment during CO2 storage in saline aquifers

    NARCIS (Netherlands)

    Roels, S.M.

    2015-01-01

    This research concerns the geological storage of CO2 and in particular injectivity impairment problems related to salt precipitation. Drying and salt precipitation in geological formations can have serious consequences for upstream operations in terms of injectivity and productivity. This can negati

  11. Evaluation of limiting mechanisms for long-term spent fuel dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, J. [ANATECH Research Corp., San Diego, CA (United States); Machiels, A. [EPRI, Palo Alto, CA (United States)

    2001-07-01

    Several failure mechanisms have been postulated that could become limiting for spent fuel in dry storage. These are: stress Corrosion Cracking (SCC), Delayed Hydride Cracking (DHC) and Creep Rupture (CR). These mechanisms are examined in some detail from two perspectives: their initial environments in which they were developed and applied, and in relation to their applicability to dry storage. Extrapolation techniques are used to transfer the mechanisms from their initial in-reactor and laboratory domains to out-of-reactor spent fuel dry storage environments. This transfer is accomplished both qualitatively where necessary and quantitatively when possible, with fracture toughness used as the transfer function. In this regard, the paper provides useful information on cladding fracture toughness estimates that recognize the specific physical conditions of the cladding, which would not be found elsewhere in the literature. The arguments presented in this paper confirm the general technical consensus that creep is the governing mechanism for spent fuel in long-term dry storage. (author)

  12. Effect of storage period and chemical treatment on sunflower parents lines seedling dry matter content

    Directory of Open Access Journals (Sweden)

    Mrđa Jelena

    2009-01-01

    Full Text Available In modern agricultural production, high quality seed which germinates quickly and evenly in different environments is the main requirement for high yields. The research was carried out in the Laboratory for Seed Testing in Institute of Field and Vegetable Crops in Novi Sad. Two cytoplasmic male sterile lines L-1 and L-2 were used for the research. Seed treatments with fungicides (benomil, metalaxyl and fludioxonil and insecticides (tiametoxam and imidacloprid were applied to evaluate effects of chemical treatments and storage duration on seedlings dry matter content. This treated seed was kept in a storage facility where all commercial seed is stored. The first assessment was done after the treatments and had been repeated every three months. Analysis of variance of the tested parameters showed statistically significant effects of chemical treatments and storage duration on seedling dry matter content in L-1 line. In line L-2, statistically significant effect of chemical treatment on seedling dry matter content was observed, whereas the effect of storage duration on seedlings dry matter content was highly significant. Double interactions were highly significant. .

  13. A study on safety analysis methodology in spent fuel dry storage facility

    Energy Technology Data Exchange (ETDEWEB)

    Che, M. S.; Ryu, J. H.; Kang, K. M.; Cho, N. C.; Kim, M. S. [Hanyang Univ., Seoul (Korea, Republic of)

    2004-02-15

    Collection and review of the domestic and foreign technology related to spent fuel dry storage facility. Analysis of a reference system. Establishment of a framework for criticality safety analysis. Review of accident analysis methodology. Establishment of accident scenarios. Establishment of scenario analysis methodology.

  14. Assessment of xylanase activity in dry storage as a potential method of reducing feedstock cost.

    Science.gov (United States)

    Smith, William A; Thompson, David N; Thompson, Vicki S; Radtke, Corey W; Carter, Brady

    2009-05-01

    Enzymatic preprocessing of lignocellulosic biomass in dry storage systems has the potential to improve feedstock characteristics and lower ethanol production costs. To assess the potential for endoxylanase activity at low water contents, endoxylanase activity was tested using a refined wheat arabinoxylan substrate and three commercial endoxylanases over the water activity range 0.21-1.0, corresponding to water contents of 5% to >60% (dry basis). Homogeneously mixed dry samples were prepared at a fixed enzyme to substrate ratio and incubated in chambers at a variety of fixed water activities. Replicates were sacrificed periodically, and endoxylanase activity was quantified as an increase in reducing sugar relative to desiccant-stored controls. Endoxylanase activity was observed at water activities over 0.91 in all enzyme preparations in less than 4 days and at a water activity of 0.59 in less than 1 week in two preparations. Endoxylanase activity after storage was confirmed for selected desiccant-stored controls by incubation at 100% relative humidity. Water content to water activity relationships were determined for three lignocellulosic substrates, and results indicate that two endoxylanase preparations retained limited activity as low as 7% to 13% water content (dry basis), which is well within the range of water contents representative of dry biomass storage. Future work will examine the effects of endoxylanase activity toward substrates such as corn stover, wheat straw, and switchgrass in low water content environments.

  15. Property Prediction of Dry Common Carp (Cyprinus Carpio During Storage by Kinetic Model

    Directory of Open Access Journals (Sweden)

    Qian Lu

    2014-12-01

    Full Text Available Common carp (Cyprinus carpio is an important food resource in European and Asian countries. Nowadays, common carp after drying process is appreciated by the transportation agency and food industry because of its low transportation cost. Changes of acid value (AV, total bacterial count (TBC, and peroxide value (PV were reported in this study. We found that the changes of AV, TBC and PV of dry common carp fitted the first order reaction model and the reaction energies of changes of AV, TBC, and PV during storage were 4.56 kJ/mol, 2.21 kJ/mol, and 2.33 kJ/mol, respectively. This study will provide theoretical knowledge to food factories relating with dry fish storage and transportation.

  16. Deployment of advanced MACSTOR dry spent fuel storage technology in Korea - A joint development program

    Energy Technology Data Exchange (ETDEWEB)

    Cobanoglu, M. M.; Pattantyus, P. [Atomic Energy Canada Limited, Ottawa (Canada); Song, M. J.; Lee, H. Y. [KHNP/NETEC, Daejeon (Korea, Republic of)

    2002-04-15

    KHNP/NETEC's (K/N) and Atomic Energy of Canada Limited (AECL) are undertaking to jointly develop a high capacity dry storage structure made of reinforced concrete that uses the MACSTOR storage module concept. This effort is based on AECL's experience and on the successful deployment of concrete canisters at Wolsong and on the deployment of air-cooled MACSTOR modules at the Gentilly 2 reactor in Canada. The proposed approach addresses the conditions specific to the Wolsong site: large yearly fuel throughput, space limitations and the need for an economical dry storage structure that can store lifetime spent fuel inventories expected from the four CANDU units. The selected configuration is a 4-row MACSTOR module with a capacity of 24,000 bundles stored in 400 baskets, each holding 60 spent fuel bundles. The module is thus termed MACSTOR/KN-400 and is expected to offer a repetitive storage density increase by a factor of approximately 3, compared to concrete canisters presently used. The four Wolsong units generate spent fuel bundles that, with the high capacity factors achieved, are in the order of 20,000 bundles or more per year. At all Korean nuclear facilities, space limitations dictate the need for storage structures having high storage density. Storage density increases have to be accomplished while maintaining safety parameters during the full term storage of nuclear fuel. During the early 1990's AECL has proceeded with the development of a 2-row MACSTOR storage module that offered a higher storage density and a more economical solution compared to the stand alone concrete canister used at Wolsong 1. These modules are in use at Gentilly since the mid 1990's and operate at a capacity of 200 baskets. The selection of a MACSTOR module with 4 rows of storage cylinders is the natural evolution of the already deployed configuration. It can be developed without additional thermal testing as the fuel is maintained within the existing licensing

  17. MACSTOR{trademark}: Dry spent fuel storage for the nuclear power industry

    Energy Technology Data Exchange (ETDEWEB)

    Pare, F.E.; Pattantyus, P. [AECL Candu, Montreal, Quebec (Canada); Hanson, A.S. [Transnuclear, Inc., Hawthorne, NY (United States)

    1993-12-31

    Safe storage of spent fuel has long been an area of critical concern for the nuclear power industry. As fuel pools fill up and re-racking possibilities become exhausted, power plant operators will find that they must ship spent fuel assemblies off-site or develop new on-site storage options. Many utility companies are turning to dry storage for their spent fuel assemblies. The MACSTOR (Modular Air-cooled Canister STORage) concept was developed with this in mind. Derived from AECL`s successful vertical loading, concrete silo program for storing CANDU nuclear spent fuel, MACSTOR was developed for light water reactor spent fuel and was subjected to full scale thermal testing. The MACSTOR Module is a monolithic, shielded concrete vault structure than can accommodate up to 24 spent fuel canisters. Each canister holds 12 PWR or 32 PWR previously cooled spent fuel assemblies with burn-up rates as high as 45,000 MWD/MTU. The structure is passively cooled by natural convection through an array of inlet and outlet gratings and galleries serving a central plenum where the (vertically) stored canisters are located. The canisters are continuously monitored by means of a pressure monitoring system developed by TNI. The MACSTOR system includes the storage module(s), an overhead gantry system for cask handling, a transfer cask for moving fuel from wet to dry storage and a cask transporter. The canister and transfer cask designs are based on Transnuclear transport cask designs and proven hot cell transfer cask technology, adapted to requirements for on-site spent fuel storage. This Modular Air Cooled System has a number of inherent advantages: efficient use of construction materials and site space; cooling is virtually impossible to impede; has the ability to monitor fuel confinement boundary integrity during storage; the fuel canisters may be used for both storage and transport and canisters utilize a flanged, ASME-III closure system that allows for easy inspection.

  18. Evolution of the MACSTOR{trademark} dry spent fuel storage system

    Energy Technology Data Exchange (ETDEWEB)

    Pare, F.E.; Joubert, W.M. [Atomic Energy of Canada Ltd., Montreal, Quebec (Canada)

    1995-12-31

    The MACSTOR{trademark} (Modular Air-Cooled Canister Storage) system was developed by Atomic Energy of Canada Limited (AECL) for the interim storage of spent fuel discharged by light water reactors. It is a hybrid system which combines the operational economies of metal cask technology with the capital economies of concrete technology. The system includes all the necessary equipment to transfer spent fuel from a storage pool to an independent interim dry spent fuel storage site. After presenting a description of the system and a brief history of its development, the paper addresses its thermal performance and modeling for various design configurations. Finally, a brief summary of the experience being gained during the implementation of a MACSTOR{trademark} system modified for CANDU spent fuel at the Gentilly-2 NPP in Quebec is presented. It includes progress made in licensing activities and in public hearings pertinent to the initiation of the project.

  19. Evaluating the feasibility of new surveillance concept for Dry Storage System through CFD methodology

    Energy Technology Data Exchange (ETDEWEB)

    Tseng, Y.S., E-mail: yungshintseng@gmail.com [Nuclear Science and Technology Development Center, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Rd., Hsingchu 30013, 325, Taiwan, ROC (China); Lin, C.H., E-mail: gp6ej3@gmail.com [Center for Energy and Environmental Research, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Rd., Hsingchu 30013, 325, Taiwan, ROC (China); Shih, C., E-mail: ckshih@ess.nthu.edu.tw [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Rd., Hsingchu 30013, 325, Taiwan, ROC (China); Wang, J.R., E-mail: jongrongwang@gmail.com [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Rd., Hsingchu 30013, 325, Taiwan, ROC (China)

    2016-08-01

    Highlights: • Thermal hydraulic behavior of a 3-D dry cask under several off-normal conditions has been numerically investigated by ANSYS/FLUENT. • The simulation methodology was fully validated by comparing the measured results of VSC-17. • The results indicated that many design bases accidents can be early detected by the purposed surveillance method. • A simply determine rule has been developed for future application for dry storage ​monitoring. - Abstract: Since the Dry Storage System (DSS) has passed into a widespread middle-term storage method for Spent Nuclear Fuels (SNFs), the situation monitoring technology for a DSS should be further improved to ensure the reliability of DSS during storing time. However, a passive cooling mechanism with a full-sealed storage requirement causes that the internal situation cannot be directly monitored by thermocouples inserted into the DSS. In this study, a new surveillance method, therefore, has been proposed to overcome this problem. It can predict the DSS situation through measuring the temperature profile at the Transportable Storage Canister (TSC). A validated CFD methodology has been utilized to confirm the method through simulating the thermal characteristics of the ChinShan DSS (CSDSS). The major factors, such as the thermal loading, accident situation and flaw caused by penetrated hole probably, have been considered in this present work. The result shows that the above-mentioned issues would obviously affect the temperature profile on the TSC and can be identified via detecting the temperature profile difference on of TSC. These results confirm that the indirectly surveillance method has enough capability to replace the original monitored method and provide more system information of DSS vendor for middle-term storage.

  20. Study on effectiveness of continuous solar dryer integrated with desiccant thermal storage for drying cocoa beans

    OpenAIRE

    Sari Farah Dina; Himsar Ambarita; Farel H. Napitupulu; Hideki Kawai

    2015-01-01

    The main objective is to assess effectiveness of continuous solar dryer integrated with desiccant thermal storage for drying cocoa beans. Two type of desiccants were tested, molecular sieve 13× (Na86 [(AlO2)86·(SiO2)106]·264H2O) as an adsorbent type and CaCl2 as an absorbent type. The results revealed that during sunshine hours, the maximum temperature within the drying chamber varied from 40 °C to 54 °C. In average, it was 9–12 °C higher than ambient temperature. These temperatures are very ...

  1. Sustainable Irrigation Allocation Model for Dry and Wet Periods using Reservoir Storage and Inflow

    Science.gov (United States)

    Surianarayanan, S.; Suribabu, C. R.; Ramakrishnan, K.

    2017-07-01

    The dry period agriculture is inevitable both for the farmers for their earning, and for the soil for its fertility by crop-rotation. In tropical countries like INDIA, dry period agriculture becomes difficult because of less (or) no rain fall. Hence a simple water balancing model for irrigation scheduling, using the measure “Volumetric Reliability” is prepared in this paper, with the storage and inflow of a reservoir both for the dry and wet periods. The case-study is done for a reservoir in INDIA with thirty one years of hydrological data(from 1982 to 2012). The objective of this paper is to prepare a simple water balance model taking 10 days periods of demand and supply for ID crop(Irrigated Dry crop, ground nut) with usage of volumetric reliability concept for the periods of deficiency and adoption of less water requirement crops to reduce the water-stress during critical periods of crop growth, and finally arrive at a feasible allocation schedule for the success of agriculture and the yield throughout the year both for wet and dry crops with the available storage on the start of irrigation for a particular year. The reservoir is divided for storages such as full, deficient and critical storages. The starting storage for the dry period from January is used after adequate allocation for wet crops, the quantity for riparian rights and for drinking water, for the sustainability. By the water-balancing, the time-series for thirty one years, it is found that for twenty two years the demand for the ID crops is satisfied with the storage in the reservoir, and in the remaining years of deficient inflows, for three years (1986,1996,2004)the demand is managed by using the safe reliability factor for demand which can nullify the deficit in demand for the whole supply period. But it is genuine to assure that the reduction in the amount of water for each 10 days periods should not exceed the survival limit of the crop. Necessary soil-moisture must be ensured in the crop

  2. Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks

    CERN Document Server

    Poulson, D; Guardincerri, E; Morris, C L; Bacon, J D; Plaud-Ramos, K; Morley, D; Hecht, A

    2016-01-01

    Radiography with cosmic ray muon scattering has proven to be a successful method of imaging nuclear material through heavy shielding. Of particular interest is monitoring dry storage casks for diversion of plutonium contained in spent reactor fuel. Using muon tracking detectors that surround a cylindrical cask, cosmic ray muon scattering can be simultaneously measured from all azimuthal angles, giving complete tomographic coverage of the cask interior. This paper describes the first application of filtered back projection algorithms, typically used in medical imaging, to cosmic ray muon imaging. The specific application to monitoring spent nuclear fuel in dry storage casks is investigated via GEANT4 simulations. With a cylindrical muon tracking detector surrounding a typical spent fuel cask, the cask contents can be confirmed with high confidence in less than two days exposure. Similar results can be obtained by moving a smaller detector to view the cask from multiple angles.

  3. CFD Analysis of a Dry Storage System for MACSTOR/KN-400

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yu sun; Shin, Byung soo; Chang, Soon heung [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2007-10-15

    There are four nuclear power plants in operation at Wolsong and, annually, more than 5,000 assemblies of spent nuclear fuels are released from each plant. Thus the concrete silo type dry storage system was constructed from '90. However, after 2006, another dry storage facility is required to accept the all amount of spent nuclear fuels from the plants. Instead of the concrete silo type, MACSTOR/KN-400 was developed to store the CANDU spent nuclear fuel more densely. In this study, computational fluid dynamics (CFD) analysis of the MACSTOR/KN-400 model was performed to confirm the thermal integrity of the facility, especially for the concrete structure, using the commercial CFD code, FLUENT. The MACSTOR/KN-400 which has Thermal Insulation Panel (TIP) and IAEA Re-verification Pipe (RVP) was modeled and analyzed in the view point of the thermal integrity of the concrete structure.

  4. Retention of short chain fatty acids under drying and storage conditions

    Directory of Open Access Journals (Sweden)

    Alexandre Santos Souza

    2011-09-01

    Full Text Available Cheese whey permeate was used as a substrate for the fermentation of Propionibacterium freudenreichi PS1 for the production of short chain fatty acids, components of the bio-aroma of Swiss cheese. The liquid bio-aroma was encapsulated by spray drying under different conditions of air inlet temperature and feed rate. A study was carried out on the stability of the bio-aroma during storage in laminated packages at 30 °C for 96 days using the product showing the greatest retention of acetic and propionic acids. The results showed that the best drying conditions were an air entrance temperature of 180 °C and a feed rate of 24 g/min resulting in particles with a smooth surface and few invaginations and micro-fissures. However, 72% of the acetic acid and 80% of the propionic acid were lost during storage showing that the wall material used was inadequate to guarantee product stability.

  5. Select Generic Dry-Storage Pilot Plant Design for Safeguards and Security by Design (SSBD) per Used Fuel Campaign

    Energy Technology Data Exchange (ETDEWEB)

    Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sprinkle, James K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-05-26

    As preparation to the year-end deliverable (Provide SSBD Best Practices for Generic Dry-Storage Pilot Scale Plant) for the Work Package (FT-15LA040501–Safeguards and Security by Design for Extended Dry Storage), the initial step was to select a generic dry-storage pilot plant design for SSBD. To be consistent with other DOE-NE Fuel Cycle Research and Development (FCR&D) activities, the Used Fuel Campaign was engaged for the selection of a design for this deliverable. For the work Package FT-15LA040501–“Safeguards and Security by Design for Extended Dry Storage”, SSBD will be initiated for the Generic Dry-Storage Pilot Scale Plant described by the layout of Reference 2. SSBD will consider aspects of the design that are impacted by domestic material control and accounting (MC&A), domestic security, and international safeguards.

  6. Nonlinear Ultrasonic Diagnosis and Prognosis of ASR Damage in Dry Cask Storage

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Jianmin [Northwestern Univ., Evanston, IL (United States); Bazant, Zdenek [Northwestern Univ., Evanston, IL (United States); Jacobs, Laurence [Georgia Inst. of Technology, Atlanta, GA (United States); Guimaraes, Maria [Electrical Power Research Institute, Palo Alto, CA (United States)

    2015-11-30

    Alkali-silica reaction (ASR) is a deleterious chemical process that may occur in cement-based materials such as mortars and concretes, where the hydroxyl ions in the highly alkaline pore solution attack the siloxane groups in the siliceous minerals in the aggregates. The reaction produces a cross-linked alkali-silica gel. The ASR gel swells in the presence of water. Expansion of the gel results in cracking when the swelling-induced stress exceeds the fracture toughness of the concrete. As the ASR continues, cracks may grow and eventually coalesce, which results in reduced service life and a decrease safety of concrete structures. Since concrete is widely used as a critical structural component in dry cask storage of used nuclear fuels, ASR damage poses a significant threat to the sustainability of long term dry cask storage systems. Therefore, techniques for effectively detecting, managing and mitigating ASR damage are needed. Currently, there are no nondestructive methods to accurately detect ASR damage in existing concrete structures. The only current way of accurately assessing ASR damage is to drill a core from an existing structure, and conduct microscopy on this drilled cylindrical core. Clearly, such a practice is not applicable to dry cask storage systems. To meet these needs, this research is aimed at developing (1) a suite of nonlinear ultrasonic quantitative nondestructive evaluation (QNDE) techniques to characterize ASR damage, and (2) a physics-based model for ASR damage evolution using the QNDE data. Outcomes of this research will provide a nondestructive diagnostic tool to evaluate the extent of the ASR damage, and a prognostic tool to estimate the future reliability and safety of the concrete structures in dry cask storage systems

  7. Conceptual design report for the ICPP spent nuclear fuel dry storage project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The conceptual design is presented for a facility to transfer spent nuclear fuel from shipping casks to dry storage containers, and to safely store those containers at ICPP at INEL. The spent fuels to be handled at the new facility are identified and overall design and operating criteria established. Physical configuration of the facility and the systems used to handle the SNF are described. Detailed cost estimate for design and construction of the facility is presented.

  8. Storage Stability of Dried Microsclerotia of the Biological Control Pathogen Mycoleptodiscus Terrestris

    Science.gov (United States)

    2009-09-01

    periods (Coley-Smith and Cooke 1971), and when conditions are favorable they can germinate by the development of mycelium (myceliogenic germination), by...Because shelf life is a primary consideration of bioherbicide marketability, studies were undertaken to test efficacy of dried material after...various periods of cold storage. MATERIALS AND METHODS Fungal Inoculum. Stock cultures of Mt (NRRL #30559) were stored and plated as described in

  9. Seismic analysis and design of a spent nuclear fuel dry storage system

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kyu-Sup; Jeong, In-Su; Kim, Kap-Sun; Kim, Jong-Soo [KONES Corporation, Seoul (Korea, Republic of); Yoon, Jeong-Hyoun; Kang, Young-Gon; Cho, Chun-Hyung; Lee, Heung-Young [Nuclear Environment Technology Institute, Daejeon (Korea, Republic of)

    2005-11-15

    A comprehensive seismic analysis has been conducted in this paper by using the computer programs, SHAKE and SASSI, for a consolidated dry storage module named MACSTOR/KN-400, which will be constructed in Wolsung CANDU Nuclear Power Plant site. Especially seismic soil-structure interaction effects have been investigated in terms of transfer functions, maximum floor acceleration and floor response spectrum, and finally those effects are to be incorporated in the detailed structure design.

  10. Seed storage at elevated partial pressure of oxygen, a fast method for analysing seed ageing under dry conditions

    Science.gov (United States)

    Groot, S. P. C.; Surki, A. A.; de Vos, R. C. H.; Kodde, J.

    2012-01-01

    Background and Aims Despite differences in physiology between dry and relative moist seeds, seed ageing tests most often use a temperature and seed moisture level that are higher than during dry storage used in commercial practice and gene banks. This study aimed to test whether seed ageing under dry conditions can be accelerated by storing under high-pressure oxygen. Methods Dry barley (Hordeum vulgare), cabbage (Brassica oleracea), lettuce (Lactuca sativa) and soybean (Glycine max) seeds were stored between 2 and 7 weeks in steel tanks under 18 MPa partial pressure of oxygen. Storage under high-pressure nitrogen gas or under ambient air pressure served as controls. The method was compared with storage at 45 °C after equilibration at 85 % relative humidity and long-term storage at the laboratory bench. Germination behaviour, seedling morphology and tocopherol levels were assessed. Key Results The ageing of the dry seeds was indeed accelerated by storing under high-pressure oxygen. The morphological ageing symptoms of the stored seeds resembled those observed after ageing under long-term dry storage conditions. Barley appeared more tolerant of this storage treatment compared with lettuce and soybean. Less-mature harvested cabbage seeds were more sensitive, as was the case for primed compared with non-primed lettuce seeds. Under high-pressure oxygen storage the tocopherol levels of dry seeds decreased, in a linear way with the decline in seed germination, but remained unchanged in seeds deteriorated during storage at 45 °C after equilibration at 85 % RH. Conclusions Seed storage under high-pressure oxygen offers a novel and relatively fast method to study the physiology and biochemistry of seed ageing at different seed moisture levels and temperatures, including those that are representative of the dry storage conditions as used in gene banks and commercial practice. PMID:22967856

  11. Pectin Methyl Esterase Activity Change in Intermediate Moisture Sun-Dried Figs after Storage

    Directory of Open Access Journals (Sweden)

    Dilek Demirbüker Kavak

    2015-12-01

    Full Text Available Intermediate moisture fruits can be obtained by rehydrating dried fruits. Intermediate moisture fruits are suitable for direct consumption compared to dry fruits and can be directly used in the production of various products such as bakery products, dairy products and candies. Aim of this study is to compare the pectin methyl esterase (PME activity of intermediate moisture figs which causes softening of the texture and to compare their microbial stability after 3 months storage period. For this purpose, dried figs were rehydrated in 30 and 80° C water until they reach 30% moisture content. Rehydrated samples were stored for 3 months at +4°C. Results showed that there was no statistically significant difference between the control samples and the samples rehydrated at 80°C according to the total viable counts. At the end of the storage period, results of residual PME activity in control samples was 24.1 μmol COOH min-1g-1, while it was found 17.4 μmol COOH min-1g-1 in samples rehydrated at 80°C. As a result rehydration conducted at 80°C provided 28% reduction in PME activity compared to the control samples rehydrated at 30°C, although it did not affect the microbial load significantly after storage.

  12. Vitamins, fatty acids, and antioxidant capacity stability during storage of freeze-dried human milk.

    Science.gov (United States)

    Lozano, Blanca; Castellote, Ana Isabel; Montes, Rosa; López-Sabater, M Carmen

    2014-09-01

    Although freezing is the most common method used to preserve human milk, nutritional and immunological components may be lost during storage. Freeze-drying could increase the shelf life of human milk, while preserving its original characteristics. Seventy-two samples of freeze-dried human milk were stored for different periods of time, up to a maximum of 3 months, at 4 °C or 40 °C. Vitamin C, tocopherols, antioxidant capacity, and fatty acids composition were analyzed. A new HILIC-UHPLC method improving vitamin C determination was also validated. Ascorbic acid and total vitamin C concentrations significantly decreased at both temperatures, while antioxidant capacity only decreased at 40 °C. Fatty acids composition and both γ-tocopherol and δ-tocopherol contents remained unaltered. The stability after storage of freeze-dried milk was higher than that reported for frozen or fresh milk indicating that freeze-drying is a promising option to improve the preservation of human milk in banks.

  13. Effect of spray drying and storage on the stability of bayberry polyphenols.

    Science.gov (United States)

    Fang, Zhongxiang; Bhandari, Bhesh

    2011-12-01

    Bayberry juice was spray dried with maltodextrin (DE 10) as a carrier and then stored under different temperature and water activities (aw). The retention of the total phenolic content (TPC) and total anthocaynins (ACN) during the drying process were about 96% and 94%, respectively, suggesting spray drying was a satisfactory technique for drying heat sensitive polyphenols. Under an aw of 0.11-0.44, the TPC and ACN in bayberry powders decreased by about 6-8% and 7-27%, respectively, after 6months storage at 4°C; at 25°C for the same storage period the decreases were between 6-9% and 9-37%, respectively, while at 40°C the decreases were in the range 7-37% and 9-94%. The anthocyanin component was more readily degraded relative to other phenolic compounds. The results suggest that bayberry powder should be stored at less than 25°C and aw of 0.33, on account of greater polyphenol stability under such conditions.

  14. Rod internal pressure of spent nuclear fuel and its effects on cladding degradation during dry storage

    Science.gov (United States)

    Kim, Ju-Seong; Hong, Jong-Dae; Yang, Yong-Sik; Kook, Dong-Hak

    2017-08-01

    Temperature and hoop stress limits have been used to prevent the gross rupture of spent nuclear fuel during dry storage. The stress due to rod internal pressure can induce cladding degradation such as creep, hydride reorientation, and delayed hydride cracking. Creep is a self-limiting phenomenon in a dry storage system; in contrast, hydride reorientation and delayed hydride cracking are potential degradation mechanisms activated at low temperatures when the cladding material is brittle. In this work, a conservative rod internal pressure and corresponding hoop stress were calculated using FRAPCON-4.0 fuel performance code. Based on the hoop stresses during storage, a study on the onset of hydride reorientation and delayed hydride cracking in spent nuclear fuel was conducted under the current storage guidelines. Hydride reorientation is hard to occur in most of the low burn-up fuel while some high burn-up fuel can experience hydride reorientation, but their effect may not be significant. On the other hand, delayed hydride cracking will not occur in spent nuclear fuel from pressurized water reactor; however, there is a lack of confirmatory data on threshold intensity factor for delayed hydride cracking and crack size distribution in the fuel.

  15. Recent findings on the oxidation of UO{sub 2} fuel under nominally dry storage conditions

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P.; McEachern, R.J.; Sunder, S.; Wasywich, K.M.; Miller, N.H.; Wood, D.D

    1995-07-01

    This paper is an overview of fuel-storage demonstration experiments, supporting research on UO{sub 2} oxidation, and associated model development, in progress at AECL's Whiteshell Laboratories. The work is being performed to determine the time/temperature limits for safe storage of irradiated CANDU fuel in dry air. The most significant recent experimental finding has been the detection of small quantities of U{sub 3}O{sub 8}, formed over periods of one to several years in a variety of experiments at 150-170 deg C. Another important trading is the slight suppression of U{sub 3}O{sub 8} formation in SIMFUEL and other doped U0{sub 2} formulations. The development of a nucleation-and-growth model for U{sub 3}O{sub 8} formation is discussed, along with available activation energy data. These provide a basis for predicting U{sub 3}O{sub 8} formation rates under dry-storage conditions, and hence optimizing fuel storage strategies. (author)

  16. Develop an piezoelectric sensing based on SHM system for nuclear dry storage system

    Science.gov (United States)

    Ma, Linlin; Lin, Bin; Sun, Xiaoyi; Howden, Stephen; Yu, Lingyu

    2016-04-01

    In US, there are over 1482 dry cask storage system (DCSS) in use storing 57,807 fuel assemblies. Monitoring is necessary to determine and predict the degradation state of the systems and structures. Therefore, nondestructive monitoring is in urgent need and must be integrated into the fuel cycle to quantify the "state of health" for the safe operation of nuclear power plants (NPP) and radioactive waste storage systems (RWSS). Innovative approaches are desired to evaluate the degradation and damage of used fuel containers under extended storage. Structural health monitoring (SHM) is an emerging technology that uses in-situ sensory system to perform rapid nondestructive detection of structural damage as well as long-term integrity monitoring. It has been extensively studied in aerospace engineering over the past two decades. This paper presents the development of a SHM and damage detection methodology based on piezoelectric sensors technologies for steel canisters in nuclear dry cask storage system. Durability and survivability of piezoelectric sensors under temperature influence are first investigated in this work by evaluating sensor capacitance and electromechanical admittance. Toward damage detection, the PES are configured in pitch catch setup to transmit and receive guided waves in plate-like structures. When the inspected structure has damage such as a surface defect, the incident guided waves will be reflected or scattered resulting in changes in the wave measurements. Sparse array algorithm is developed and implemented using multiple sensors to image the structure. The sparse array algorithm is also evaluated at elevated temperature.

  17. Probabilistic risk assessment of aircraft impact on a spent nuclear fuel dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Almomani, Belal, E-mail: balmomani@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Lee, Sanghoon, E-mail: shlee1222@kmu.ac.kr [Department of Mechanical and Automotive Engineering, Keimyung University, Dalgubeol-daero 1095, Dalseo-gu, Daegu (Korea, Republic of); Jang, Dongchan, E-mail: dongchan.jang@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kang, Hyun Gook, E-mail: kangh6@rpi.edu [Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180 (United States)

    2017-01-15

    Highlights: • A new risk assessment frame is proposed for aircraft impact into an interim dry storage. • It uses event tree analysis, response-structural analysis, consequence analysis, and Monte Carlo simulation. • A case study of the proposed procedure is presented to illustrate the methodology’s application. - Abstract: This paper proposes a systematic risk evaluation framework for one of the most significant impact events on an interim dry storage facility, an aircraft crash, by using a probabilistic approach. A realistic case study that includes a specific cask model and selected impact conditions is performed to demonstrate the practical applicability of the proposed framework. An event tree analysis of an occurred aircraft crash that defines a set of impact conditions and storage cask response is constructed. The Monte-Carlo simulation is employed for the probabilistic approach in consideration of sources of uncertainty associated with the impact loads onto the internal storage casks. The parameters for representing uncertainties that are managed probabilistically include the aircraft impact velocity, the compressive strength of the reinforced concrete wall, the missile shape factor, and the facility wall thickness. Failure probabilities of the impacted wall and a single storage cask under direct mechanical impact load caused by the aircraft crash are estimated. A finite element analysis is applied to simulate the postulated direct engine impact load onto the cask body, and a source term analysis for associated releases of radioactive materials as well as an off-site consequence analysis are performed. Finally, conditional risk contribution calculations are represented by an event tree model. Case study results indicate that no severe risk is presented, as the radiological consequences do not exceed regulatory exposure limits to the public. This risk model can be used with any other representative detailed parameters and reference design concepts for

  18. Dry Cask Storage Characterization Project - Phase 1: CASTOR V/21 Cask Opening and Examination

    Energy Technology Data Exchange (ETDEWEB)

    Bare, Walter Claude; Ebner, Matthias Anthony; Torgerson, Laurence Dale

    2001-08-01

    This report documents visual examination and testing conducted in 1999 and early 2000 at the Idaho National Engineering and Environmental Laboratory (INEEL) on a Gesellschaft für Nuklear Service (GNS) CASTOR V/21 pressurized water reactor (PWR) spent fuel dry storage cask. The purpose of the examination and testing is to develop a technical basis for renewal of licenses and Certificates of Compliance for dry storage systems for spent nuclear fuel and high-level waste at independent spent fuel storage installation sites. The examination and testing was conducted to assess the condition of the cask internal and external surfaces, cask contents consisting of 21 Westinghouse PWR spent fuel assemblies from Dominion’s (formerly named Virginia Power) Surry Power Station and cask concrete storage pad. The assemblies have been continuously stored in the CASTOR cask since 1985. Cask exterior surface and selected fuel assembly temperatures, and cask surface gamma and neutron dose rates were measured. Cask external/internal surfaces, fuel basket components including accessible weldments, fuel assembly exteriors, and primary lid seals were visually examined. Selected fuel rods were removed from one fuel assembly, visually examined, and then shipped to Argonne National Laboratory for nondestructive, destructive, and mechanical examination. Cask interior crud samples and helium cover gas samples were collected and analyzed. The results of the examination and testing indicate the concrete storage pad, CASTOR V/21 cask, and cask contents exhibited sound structural and seal integrity and that long-term storage has not caused detectable degradation of the spent fuel cladding or the release of gaseous fission products between 1985 and 1999.

  19. The role of protein modifications in senescence of freeze-dried Acetobacter senegalensis during storage

    Science.gov (United States)

    2014-01-01

    Background Loss of viability is one of the most important problems during starter culture production. Previous research has mostly focused on the production process of bacterial starters, but there are few studies about cellular protein deterioration causing cell defectiveness during storage. In the present study, we investigated the influence of storage temperature (−21, 4, 35°C) on the cellular protein modifications which may contribute to the senescence of freeze-dried Acetobacter senegalensis. Results Heterogeneous populations composed of culturable cells, viable but non-culturable cells (VBNC) and dead cells were generated when freeze-dried cells were kept at −21 and 4°C for 12 months whereas higher storage temperature (35°C) mainly caused death of the cells. The analysis of stored cell proteome by 2D-DiGE demonstrated a modified pattern of protein profile for cell kept at 4 and 35°C due to the formation of protein spot trains and shift of Isoelectric point (pI). Quantification of carbonylated protein by ELISA showed that the cells stored at 4 and 35°C had higher carbonylated protein contents than fresh cells. 2D-DiGE followed by Western blotting also confirmed the carbonylation of cellular proteins involved in translation process and energy generation. The auto-fluorescent feature of cells kept at 35°C increased significantly which may be an indication of protein glycation during storage. In addition, the percentage of cellular unsaturated fatty acid and the solubility of cellular proteins decreased upon storage of cells at higher temperature suggesting that peroxidation of fatty acids and possibly protein lipidation and oxidation occurred. Conclusions High storage temperature induces some deteriorative reactions such as protein oxidation, lipidation and glycation which may cause further protein modifications like pI-shift, and protein insolubility. These modifications can partly account for the changes in cell viability. It can also be deduced

  20. Antioxidant and Sensorial Properties of Polyfloral Honey with Dried Apricots after One Year of Storage

    Directory of Open Access Journals (Sweden)

    Jelena Vulić

    2015-01-01

    Full Text Available Total phenol (TPh and flavonoid (TFd contents, antioxidant and sensorial properties of polyfloral (PH, and polyfloral honey after one year of storage (PHs with dried apricots (20, 30, and 40% were evaluated. In comparison to honey, TPh increased 1.86 times for PH40. After storage time, TPh of PH40s increased slightly lower (1.77 times, compared to PHs. TFd slightly increased, approximately 3.23-fold, from PH to PH40, while PHs showed increase of 5.15-fold for PH40s. Antioxidant activity increased with increasing concentration of apricots in honey. EC50OH varied from 3.36 for PH to 2.29 mg/mL for PH40 and from 3.48 for PHs to 2.68 mg/mL for PH40s; EC50DPPH ranged from 30.60 for PH to 14.95 mg/mL for PH40 and from 31.22 for PHs to 17.43 mg/mL for PH40s; RP0.5 ranged from 66.37 for PH to 31.83 mg/mL for PH40 and from 67.99 for PHs to 35.03 mg/mL for PH40s. Statistical analysis suggested that TPh and TFd were associated with antioxidant activity and colour. Sensory parameters, before and after storage, indicated very good sensory qualities. Phenolic composition, antioxidant capacity, and sensory properties were promoted after addition of dried apricots and these parameters stayed improved, since antioxidant compounds present in dried apricots aided in maintenance of honey properties along one year of storage.

  1. Survival of Salmonella during Drying of Fresh Ginger Root (Zingiber officinale) and Storage of Ground Ginger.

    Science.gov (United States)

    Gradl, Dana R; Sun, Lingxiang; Larkin, Emily L; Chirtel, Stuart J; Keller, Susanne E

    2015-11-01

    The survival of Salmonella on fresh ginger root (Zingiber officinale) during drying was examined using both a laboratory oven at 51 and 60°C with two different fan settings and a small commercially available food dehydrator. The survival of Salmonella in ground ginger stored at 25 and 37°C at 33% (low) and 97% (high) relative humidity (RH) was also examined. To inoculate ginger, a four-serovar cocktail of Salmonella was collected by harvesting agar lawn cells. For drying experiments, ginger slices (1 ± 0.5 mm thickness) were surface inoculated at a starting level of approximately 9 log CFU/g. Higher temperature (60°C) coupled with a slow fan speed (nonstringent condition) to promote a slower reduction in the water activity (aw) of the ginger resulted in a 3- to 4-log reduction in Salmonella populations in the first 4 to 6 h with an additional 2- to 3-log reduction by 24 h. Higher temperature with a higher fan speed (stringent condition) resulted in significantly less destruction of Salmonella throughout the 24-h period (P ginger. During storage at 97% RH, the maximum aw values were 0.85 at 25°C and 0.87 at 37°C; Salmonella was no longer detected after 25 and 5 days of storage, respectively, under these conditions. At 33% RH, the aw stabilized to approximately 0.35 at 25°C and 0.31 at 37°C. Salmonella levels remained relatively constant throughout the 365-day and 170-day storage periods for the respective temperatures. These results indicate a relationship between temperature and aw and the survival of Salmonella during both drying and storage of ginger.

  2. Behavior of spent fuel and cask components after extended periods of dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Kenneally, R. [U.S. Nuclear Regulatory Commission, Rockville, MD (United States); Kessler, J. [Electric Power Research Inst., Palo Alto, CA (United States)

    2001-07-01

    The U.S. Nuclear Regulatory Commission (NRC) promulgated 10 CFR Part 72, Title 10, for the independent storage of spent nuclear fuel and high-level radioactive waste outside reactor spent fuel pools. Part 72 currently limits the license term for an independent spent fuel storage installation to 20 years from the date of issuance. Licenses may be renewed by the Commission at or before the expiration of the license term. Applications for renewal of a license should be filed at least two years prior to the expiration of the existing license. In preparation for possible license renewal, the NRC Office of Nuclear Material and Safeguards, Spent Fuel Project Office, is developing the technical basis for renewals of licenses and Certificates of Compliance for dry storage systems for spent nuclear fuel and high-level radioactive waste at independent spent fuel storage installation sites. An analysis of past performance of selected components of these systems is required as part of that technical basis. In the years 1980 through the early 1990, the Department of Energy (DOE) procured four prototype dry storage casks for testing at the Idaho National Engineering and Environmental Laboratory (INEEL): Castor-V/21, MC-10, TN-24P, and VSC-17. The primary purpose of the testing was to benchmark thermal and radiological codes and to determine the thermal and radiological characteristics of the casks. A series of examinations in 1999 and early 2000 to investigate the integrity of the Castor V/21 cask were undertaken. There is no evidence of significant degradation of the Castor V/21 cask systems important to safety from the time of initial loading of the cask in 1985 up to the time of testing in 1999. (author)

  3. Freeze-drying of HESylated IFNα-2b: Effect of HESylation on storage stability in comparison to PEGylation.

    Science.gov (United States)

    Liebner, Robert; Bergmann, Sarah; Hey, Thomas; Winter, Gerhard; Besheer, Ahmed

    2015-11-10

    A comparison of lyophilized PEGylated and HESylated IFNα was carried out to investigate the influence of protein conjugation, lyoprotectants as well as storage temperature on protein stability. Results show that PEG tends to crystallize during freeze-drying, reducing protein stability upon storage. In contrast, HESylation(®) drastically improved the stability over PEGylation by remaining totally amorphous during lyophilization, with and without lyoprotectants while providing a high glass transition temperature of the freeze-dried cakes.

  4. Water uptake, priming, drying and storage effects inCassia excelsa Schrad seeds

    Directory of Open Access Journals (Sweden)

    Jeller H.

    2003-01-01

    Full Text Available The aims of this study were to evaluate the effects of osmotic potential on the water uptake curvein Cassia excelsa seeds and use the results to analyze the effects of dehydration and storage on primed seed germination. Seeds were imbibed in distillad water and polyethylene glicol (PEG 6000 osmotic solutions at -0.2, -0.4, and -0.6 MPa, at 20ºC. The radicle emergence and seed moisture content were evaluated at 6-hour intervals during 240 hours. Afterwards, seeds were primed in distillad water and PEG 6000 solutions at -0.2, -0.4, and -0.6 MPa for 48, 72, 96, and 168 hours at 20ºC, followed by air drying and storage for 15 days at 5ºC. The lower the osmotic potential, the higher the time required for priming. The osmoconditioning yields benefits with PEG solutions at 0.0 and -0.2 MPa; seed improvements were maintained during storage for 15 days at 5ºC, but were reverted by seed drying.

  5. NDE to Manage Atmospheric SCC in Canisters for Dry Storage of Spent Fuel: An Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pardini, Allan F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cuta, Judith M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Adkins, Harold E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Casella, Andrew M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qiao, Hong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Larche, Michael R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, Aaron A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Doctor, Steven R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-09-01

    This report documents efforts to assess representative horizontal (Transuclear NUHOMS®) and vertical (Holtec HI-STORM) storage systems for the implementation of non-destructive examination (NDE) methods or techniques to manage atmospheric stress corrosion cracking (SCC) in canisters for dry storage of used nuclear fuel. The assessment is conducted by assessing accessibility and deployment, environmental compatibility, and applicability of NDE methods. A recommendation of this assessment is to focus on bulk ultrasonic and eddy current techniques for direct canister monitoring of atmospheric SCC. This assessment also highlights canister regions that may be most vulnerable to atmospheric SCC to guide the use of bulk ultrasonic and eddy current examinations. An assessment of accessibility also identifies canister regions that are easiest and more difficult to access through the ventilation paths of the concrete shielding modules. A conceivable sampling strategy for canister inspections is to sample only the easiest to access portions of vulnerable regions. There are aspects to performing an NDE inspection of dry canister storage system (DCSS) canisters for atmospheric SCC that have not been addressed in previous performance studies. These aspects provide the basis for recommendations of future efforts to determine the capability and performance of eddy current and bulk ultrasonic examinations for atmospheric SCC in DCSS canisters. Finally, other important areas of investigation are identified including the development of instrumented surveillance specimens to identify when conditions are conducive for atmospheric SCC, characterization of atmospheric SCC morphology, and an assessment of air flow patterns over canister surfaces and their influence on chloride deposition.

  6. Effective moisture diffusivity and activation energy of rambutan seed under different drying methods to promote storage stability

    Science.gov (United States)

    Ahmad, So'bah; Shamsul Anuar, Mohd; Saleena Taip, Farah; Shamsudin, Rosnah; M, Siti Roha A.

    2017-05-01

    The effects of two drying methods, oven and microwave drying on the effective moisture diffusivity and activation energy of rambutan seed were studied. Effective moisture diffusivity and activation energy are the main indicators used for moisture movement within the material. Hence, it is beneficial to determine an appropriate drying method to attain a final moisture content of rambutan seed that potentially could be used as secondary sources in the industry. An appropriate final moisture content will provide better storage stability that can extend the lifespan of the rambutan seed. The rambutan seeds were dried with two drying methods (oven and microwave) at two level of the process variables (oven temperature; 40°C and 60°C and microwave power; 250W and 1000W) at constant initial moisture contents. The result showed that a higher value of effective moisture diffusivity and less activation energy were observed in microwave drying compared to oven drying. This finding portrays microwave drying expedites the moisture removal to achieve the required final moisture content and the most appropriate drying method for longer storage stability for rambutan seed. With respect to the process variables; higher oven temperatures and lower microwave powers also exhibit similar trends. Hopefully, this study would provide a baseline data to determine an appropriate drying method for longer storage period for turning waste to by-products.

  7. The influence of sun drying process and prolonged storage on composition of essential oil from clove buds (Syzygium aromaticum)

    Science.gov (United States)

    Hastuti, L. T.; Saepudin, E.; Cahyana, A. H.; Rahayu, D. U. C.; Murni, V. W.; Haib, J.

    2017-07-01

    Clove (Syzygium aromaticum) is native to Indonesia and used as a spice in virtually all of the world's cuisine. Clove bud oil, a yellow liquid, is obtained from distillation of buds. The quality of oil is influenced by origin, post-harvest processing, pre-treatment before distillation, the distillation method, and post-distillation treatment. The objective of this study is to investigate the effect of drying process and prolonged storage on essential oil composition of clove bud from the Tolitoli, Indonesia. To determine the effect of drying, fresh clove bud was dried under sunlight until it reached moisture content 13±1 %. The effect of storage was studied in the oil extracted from clove bud that was stored in laboratory at 25 °C for 4 months. The essential oil of each treatment was obtained by steam distillation and its chemical composition was analyzed by GC/MS. The major components found in fresh and dried clove are as follows: eugenol, eugenyl acetate, and caryophyllene. Percentage of caryophyllene was slightly increase after drying but decrease during storage. While the content of eugenyl acetate decreased during drying and storage, the content of eugenol increased. The drying and storage also affect to the change on minor compounds of essential oil of clove.

  8. Seed storage at elevated partial pressure of oxygen, a fast method for analysing seed ageing under dry conditions

    NARCIS (Netherlands)

    Groot, S.P.C.; Surki, A.A.; Vos, de R.C.H.; Kodde, J.

    2012-01-01

    Background and Aims Despite differences in physiology between dry and relative moist seeds, seed ageing tests most often use a temperature and seed moisture level that are higher than during dry storage used in commercial practice and gene banks. This study aimed to test whether seed ageing under

  9. Storage of solid propellants in a dry environment. [mechanical properties resulting from long term exposure to aerospace environments

    Science.gov (United States)

    Udlock, D. E.

    1978-01-01

    Storage of solid propellants in either a dry or a vacuum environment causes a significantly greater increase in the propellants' modulus and maximum tensile strength than does ambient storage. It is postulated that these physical property changes can be attributed to the effect trace amount of moisture has on the bond between the propellants' binder and oxidizer.

  10. Common criteria among States for storage and use of dried blood spot specimens after newborn screening

    Directory of Open Access Journals (Sweden)

    Carlo Petrini

    2012-06-01

    Full Text Available Biological samples collected in biobanks are a resource with significant research potential. The Italian Joint Group cNB - cNBBSV (National committee of Bioethics - National committee for Biosecurity, Biotechnologies and Life Sciences published a document reporting recommendations on storage and use of dried blood spot (DBS and on the development of a National Network of Regional Newborn Screening Repositories for collection of residual DBS. Several ethical questions (about consent, possible use of genetic information, unanticipated possible usages for research purposes rise from residual newborn screening specimens collections. Moreover, legal and ethical controversies are accentuated by the conflicts between the interests of sample donors, biobank holders, researchers and the public. To overcome these difficulties the identification of a few criteria for storage and research usage of DBS is crucial.

  11. Stability of Capsaicinoids and Antioxidants in Dry Hot Peppers under Different Packaging and Storage Temperatures

    Directory of Open Access Journals (Sweden)

    Qumer Iqbal

    2015-03-01

    Full Text Available The maintenance of the quality and storage life of perishable fruits and vegetables is a major challenge for the food industry. In this study, the effects of different temperatures, packaging materials and storage time on the stability of capsaicinoids and antioxidants, such as total carotenoids, ascorbic acid and total phenolic compounds, were studied in three commercially cultivated hot pepper hybrids, namely Sky Red, Maha and Wonder King. For this purpose, dry whole pods were packed in jute bags and low-density polyethylene bags (LDPE, stored for five months under controlled conditions at 20, 25 or 30 ○C and analyzed on Day 0 and at 50-day intervals until Day 150. The three hot pepper hybrids differed significantly with respect to their capsaicinoids and antioxidant concentrations, but the results indicated that with the increase in storage temperature and time, a gradual and steady decrease in these levels was equally observed for all hybrids. Overall, mean concentrations after five months were significantly reduced by 22.6% for ascorbic acid, 19.0% for phenolic compounds, 17% for carotenoids and 12.7% for capsaicinoids. The trends of capsaicinoids and antioxidants evolution were decreasing gradually during storage until Day 150, this effect being more pronounced at higher temperature. Furthermore, the disappearance rates of capsaicinoids and antioxidants were higher in peppers packed in jute bags than in those wrapped with LDPE. In conclusion, despite the sensitivity of capsaicinoids and antioxidants to oxygen, light and moisture, the packaging in natural jute or synthetic LDPE plastic bags, as well as the storage at ambient temperature preserved between 77.4% and 87.3% of the initial amounts of these health- and nutrition-promoting compounds during five months’ storage.

  12. Condensed milk storage and evaporation affect the flavor of nonfat dry milk.

    Science.gov (United States)

    Park, Curtis W; Drake, MaryAnne

    2016-12-01

    Unit operations in nonfat dry milk (NFDM) manufacture influence sensory properties, and consequently, its use and acceptance in ingredient applications. Condensed skim milk may be stored at refrigeration temperatures for extended periods before spray drying due to shipping or lack of drying capacity. Currently, NFDM processors have 2 options for milk concentration up to 30% solids: evaporation (E) or reverse osmosis (RO). The objective of this study was to determine the effect of condensed milk storage and milk concentration method (E vs. RO) on the flavor of NFDM and investigate mechanisms behind flavor differences. For experiment 1, skim milk was pasteurized and concentrated to 30% solids by E or RO and then either stored for 24h at 4°C or concentrated to 50% solids by E and spray dried immediately. To investigate mechanisms behind the results from experiment 1, experiment 2 was constructed. In experiment 2, pasteurized skim milk was subjected to 1 of 4 treatments: control (no E), heated in the evaporator without vacuum, E concentration to 30% solids, or E concentration to 40% solids. The milks were then diluted to the same solids content and evaluated. Volatile compounds were also measured during concentration in the vapor separator of the evaporator. Sensory properties were evaluated by descriptive sensory analysis and instrumental volatile compound analysis was conducted to evaluate volatile compounds. Interaction effects between storage and method of concentration were investigated. In experiment 1, E decreased sweet aromatic flavor and many characteristic milk flavor compounds and increased cardboard and cooked flavors in NFDM compared with RO. Liquid storage increased cardboard flavor and hexanal and octanal and decreased sweet aromatic flavors and vanillin concentration. Results from experiment 2 indicated that the characteristic milk flavors and their associated volatile compounds were removed by the vapor separator in the evaporator due to the heat and

  13. Effects of Different Drying Methods and Storage Time on Free Radical Scavenging Activity and Total Phenolic Content of Cosmos Caudatus.

    Science.gov (United States)

    Mediani, Ahmed; Abas, Faridah; Tan, Chin Ping; Khatib, Alfi

    2014-05-07

    The present study was conducted to determine the effect of air (AD), oven (OD) and freeze drying (FD) on the free radical scavenging activity and total phenolic content (TPC) of Cosmos caudatus and the effect of storage time by the comparison with a fresh sample (FS). Among the three drying methods that were used, AD resulted in the highest free radical scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH) (IC50 = 0.0223 mg/mL) and total phenolic content (27.4 g GAE/100 g), whereas OD produced the lowest scavenging activity and TPC value. After three months of storage, the dried samples showed a high and consistent free radical scavenging activity when compared to stored fresh material. The drying methods could preserve the quality of C. caudatus during storage and the stability of its bioactive components can be maintained.

  14. Critical Analysis of Dry Storage Temperature Limits for Zircaloy-Clad Spent Nuclear Fuel Based on Diffusion Controlled Cavity Growth

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, T.A.; Rosen, R.S.; Kassner, M.E.

    1999-12-01

    Interim dry storage of spent nuclear fuel (SNF) rods is of critical concern because a shortage of existing SNF wet storage capacity combined with delays in the availability of a permanent disposal repository has led to an increasing number of SNF rods being placed into interim dry storage. Safe interim dry storage must be maintained for a minimum of twenty years according to the Standard Review Plan for Dry Cask Storage Systems [1] and the Code of Federal Regulations, 10 CFR Part 72 [2]. Interim dry storage licensees must meet certain safety conditions when storing SNF rods to ensure that there is a ''very low probability (e.g. 0.5%) of cladding breach during long-term storage'' [1]. Commercial SNF typically consists of uranium oxide pellets surrounded by a thin cladding. The cladding is usually an {alpha}-zirconium based alloy know as ''Zircaloy''. In dry storage, the SNF rods are confined in one of several types of cask systems approved by the Nuclear Regulatory Commission (NRC). ''The cask system must be designed to prevent degradation of fuel cladding that results in a type of cladding breach, such as axial-splits or ductile fracture, where irradiated UO{sub 2} particles may be released. In addition, the fuel cladding should not degrade to the point where more than one percent of the fuel rods suffer pinhole or hairline crack type failure under normal storage conditions [1].'' The NRC has approved two models [3,4] for use by proposed dry storage licensees to determine the maximum initial temperature limit for nuclear fuel rods in dry storage that supposedly meet the above criteria and yield consistent temperature limits. Though these two models are based on the same fundamental failure theory, different assumptions have been made including the choice of values for material constants in the failure equation. This report will examine and compare the similarities and inconsistencies of these two models

  15. Effect of storage and drying temperature on the gelation behavior and structural characteristics of sericin.

    Science.gov (United States)

    Jo, Yoon Nam; Park, Byung-Dae; Um, In Chul

    2015-11-01

    Owing to unique properties, including the wound healing effect, sericin gel and films have attracted significant attention in the biomedical and cosmetic fields. The structural characteristics and properties of sericin gels and films are especially important owing to their effect on the performance of sericin in biomedical and cosmetic applications. In the present study, the effect of temperature on the gelation behavior, gel disruption, and sol-gel transition of sericin was examined using rheometry. In addition, the effect of the drying temperature on the structural characteristics of the sericin film was determined via Fourier transform infrared (FTIR) spectroscopy. The strength of the sericin gel increased and the gelation process was prolonged with decreasing storage temperatures. FTIR and differential scanning calorimetry (DSC) results also revealed that the crystallinity and the thermal decomposition temperature of the sericin film increased with decreasing drying temperature. The sericin gels were disrupted at a storage time of 40min when they were stored at temperatures higher than 50°C, and the corresponding gel strength decreased with increasing temperature. Furthermore, the thermo-reversible nature of gel-sol transition of sericin was confirmed by rheological and FTIR measurements.

  16. Influence of modified blanching treatments on inactivation of Salmonella during drying and storage of carrot slices.

    Science.gov (United States)

    Dipersio, Patricia A; Kendall, Patricia A; Yoon, Yohan; Sofos, John N

    2007-08-01

    Documented outbreaks of human illness associated with consumption of minimally processed produce have increased in recent years. This study evaluated the influence of modified treatments on inactivation of Salmonella during preparation, home-type dehydration (60 degrees C, 6h) and storage of carrot slices. Inoculated (five strains, 7.8 log cfu/g) slices were subjected to the following treatments: (i) untreated control, (ii) steam blanching (88 degrees C, 10 min), (iii) water blanching (88 degrees C, 4 min), (iv) blanching in a 0.105% citric acid solution (88 degrees C, 4 min), or (v) blanching in a 0.21% citric acid solution (88 degrees C, 4 min), dried for 6h at 60 degrees C (140 degrees F), and stored for up to 30 d. Bacterial populations were reduced by 3.8-4.1, 4.6-5.1 and 4.2-4.6 log cfu/g immediately following steam, water or citric acid blanching, respectively. After 6h of dehydration, total reductions were 1.6-1.7 (control), 4.0-5.0 (steam blanched), 4.1-4.6 (water blanched) and 4.9-5.4 (blanched in citric acid solution) log cfu/g. Populations continued to decrease throughout storage, but were still detectable by direct plating at 30 d on all samples except for those blanched in 0.21% citric acid. Results suggest that blanching carrot slices, particularly blanching in 0.21% citric acid, before drying should enhance inactivation of Salmonella during home-type dehydration and storage.

  17. Seismic Soil-Structure Interaction Analysis of a Consolidated Dry Storage Module for CANDU Spent Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Young Gon; Yoon, Jeong Hyoun; Cho, Chun Hyung; Lee, Heung Young [Korea Hydro and Nuclear Power Co., Ltd., Taejon (Korea, Republic of); Choi, Kyu Sup; Jeong, In Su; Kim, Jong Soo [KONES Co., Seoul (Korea, Republic of)

    2005-07-01

    The MACSTOR/KN-400 module has been developed as an effective alternative to the existing stand alone concrete canister for dry storage of CANDU spent fuel. The structure is a concrete monolith of 21.67 m long and 12.66 m wide and has a height equal to 7.518 m including the bottom slab. Inside of the concrete module are built 40 storage cylinders accommodating ten 60- bundle dry storage baskets, which are suspended from the top slab and eventually constrained at 10 cm above the bottom slab with horizontal seismic restraints. The main cooling process of the MACSTOR/KN-400 module is by air convection through air inlets and outlets. The civil design parameters, with respect to meteorological and seismic loads applied to the module are identical to those specified for the Wolsung CANDU 3 and 4 plants except for local geologic characteristics. As per USNRC SRP Section 3.7.2 and current US practices, Soil-Structure Interaction (SSI) effect shall be considered for all structures not supported by a rock or rock-like soil foundation materials. An SSI is a very complicated phenomenon of the structure coupled with the soil medium that is usually semi-infinite in extent and highly nonlinear in its behavior. And the effect of the SSI is noticeable especially for stiff and massive structures resting on relatively soft ground. Thus the SSI effect has to be considered in the seismic design of MACSTOR/KN-400 module resting on soil medium. The scope of the this paper is to carry out a seismic SSI analysis of the MACSTOR/KN-400 module, in order to show how much the SSI gives an effect on the structural responses by comparing with the fixed-base analysis.

  18. Analysis of dose consequences arising from the release of spent nuclear fuel from dry storage casks.

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, Samuel G.; Morrow, Charles.

    2013-01-01

    The resulting dose consequences from releases of spent nuclear fuel (SNF) residing in a dry storage casks are examined parametrically. The dose consequences are characterized by developing dose versus distance curves using simplified bounding assumptions. The dispersion calculations are performed using the MELCOR Accident Consequence Code System (MACCS2) code. Constant weather and generic system parameters were chosen to ensure that the results in this report are comparable with each other and to determine the relative impact on dose of each variable. Actual analyses of site releases would need to accommodate local weather and geographic data. These calculations assume a range of fuel burnups, release fractions (RFs), three exposure scenarios (2 hrs and evacuate, 2 hrs and shelter, and 24 hrs exposure), two meteorological conditions (D-4 and F-2), and three release heights (ground level 1 meter (m), 10 m, and 100 m). This information was developed to support a policy paper being developed by U.S. Nuclear Regulatory Commission (NRC) staff on an independent spent fuel storage installation (ISFSI) and monitored retrievable storage installation (MRS) security rulemaking.

  19. Developing a structural health monitoring system for nuclear dry cask storage canister

    Science.gov (United States)

    Sun, Xiaoyi; Lin, Bin; Bao, Jingjing; Giurgiutiu, Victor; Knight, Travis; Lam, Poh-Sang; Yu, Lingyu

    2015-03-01

    Interim storage of spent nuclear fuel from reactor sites has gained additional importance and urgency for resolving waste-management-related technical issues. In total, there are over 1482 dry cask storage system (DCSS) in use at US plants, storing 57,807 fuel assemblies. Nondestructive material condition monitoring is in urgent need and must be integrated into the fuel cycle to quantify the "state of health", and more importantly, to guarantee the safe operation of radioactive waste storage systems (RWSS) during their extended usage period. A state-of-the-art nuclear structural health monitoring (N-SHM) system based on in-situ sensing technologies that monitor material degradation and aging for nuclear spent fuel DCSS and similar structures is being developed. The N-SHM technology uses permanently installed low-profile piezoelectric wafer sensors to perform long-term health monitoring by strategically using a combined impedance (EMIS), acoustic emission (AE), and guided ultrasonic wave (GUW) approach, called "multimode sensing", which is conducted by the same network of installed sensors activated in a variety of ways. The system will detect AE events resulting from crack (case for study in this project) and evaluate the damage evolution; when significant AE is detected, the sensor network will switch to the GUW mode to perform damage localization, and quantification as well as probe "hot spots" that are prone to damage for material degradation evaluation using EMIS approach. The N-SHM is expected to eventually provide a systematic methodology for assessing and monitoring nuclear waste storage systems without incurring human radiation exposure.

  20. Effect of oven drying and storage on essential oil composition of clove (Syzygium aromaticum) from Toli-Toli

    Science.gov (United States)

    Murni, V. W.; Saepudin, E.; Cahyana, A. H.; Rahayu, D. U. C.; Hastuti, L. T.; Haib, J.

    2017-07-01

    The research about post-harvested clove is still limited especially in Indonesia, as the biggest producer of clove in the world. The present study was aimed to investigate the effect of drying process and storage on the composition of essential oil of Indonesian clove originated from Toli-Toli. The essential oil of fresh and dried clove was obtained by steam distillation and the composition of the oil was analyzed by gas chromatography-mass spectrometry (GC-MS). In all of the clove oil samples, eugenol was the major component, followed by caryophyllene and acetyleugenol. The drying method used was oven drying at 50°C until clove's moisture content reaches 13±1%. During the drying process, the content of phenylpropanoids such as eugenol, isoeugenol, and chavicol increased, while esters and monoterpenes decreased. The composition of clove oil was studied from dried clove after oven drying, then stored in the laboratory at room temperature for 4 months. There was slightly change on clove oil composition after 4 months of storage. The content of major components of clove like eugenol was higher while acetyleugenol was lower after 4 months of storage.

  1. Evaluation of safety margins during dry storage of CANDU fuel in MACSTOR/KN-400 module

    Energy Technology Data Exchange (ETDEWEB)

    Beaudoin, R.; Shill, R. [Atomic Energy of Canada Limited, Montreal, Quebec (Canada); Lee, K.-H.; Chung, S.-H.; Yoon, J.-H.; Choi, B.-I.; Lee, H.-Y.; Song, M.-J. [KHNP, Nuclear Environment Technology Inst., Taejon (Korea, Republic of)

    2004-07-01

    This paper covers an evaluation of the available safety margin against fuel bundle degradation during dry storage of CANDU spent fuel bundles in a MACSTOR/KN-400 module, considering normal, off-normal and postulated accidental conditions. Korea Hydro and Nuclear Power (KHNP), in collaboration with Atomic Energy of Canada Limited (AECL), are developing a new module for the dry storage of spent fuel from the four CANDU 6 nuclear reactors at the Wolsong site in South Korea. The module provides the benefit of occupying significantly less area than the concrete canisters presently used. The modules are designed for a minimum service life of 50 years. During that period, the spent fuel bundles shall be safely stored. This imposes that failure of a fuel bundle element or unacceptable degradation of an existing defect (from reactor operation) does not occur during the dry storage period. The fuel bundles are stored in an air-filled fuel basket that releases 365 Watts on average and a maximum of 390 Watts when rare fuel loading conditions are postulated. In addition, specific accidental air flow cooling conditions are postulated that consist of 100% blockage of all air inlets on one side of the module. These conditions can generate a peak daily fuel temperature of up to 155{sup o}C during a reference hot summer day during the first year of operation. The fuel temperature decreases over the years and also fluctuates due to daily and seasonal temperature variations. At this temperature, fuel elements with intact Zircaloy sheathing will not experience damage. However, for the few fuel bundle elements that are non-leaktight (less than 1 per 37,000), some re-oxidation of UO{sub 2} into higher oxides such as U{sub 3}O{sub 7} / U{sub 4}O{sub 9} and U{sub 3}O{sub 8} will occur. This latter form of Uranium oxide is undesirable due to its lower density that results in a volumetric increase of the pellet that can overstress the fuel element sheathing. The level of fuel pellet

  2. Anti- and pro-oxidative effect of fresh and freeze-dried vegetables during storage of mayonnaise.

    Science.gov (United States)

    Raikos, Vassilios; Neacsu, Madalina; Morrice, Philip; Duthie, Garry

    2015-12-01

    Mayonnaise was supplemented with vegetables (5 % w/w) and the effect of storage time at 4 °C on the oxidative stability of the dispersed phase was investigated. Results indicated that mayonnaise is prone to lipid oxidation during storage under refrigerator conditions. The type of vegetable used for mayonnaise reformulation was critical in inhibiting oxidation and followed the order beetroot > carrot ≈ onion with respect to antioxidant capacity. Broccoli induced a pro-oxidant effect and the rate of oxidation by the end of the storage period was 42 times higher compared with the control. The addition of beetroot, either fresh or freeze-dried, improved the oxidative stability of mayonnaise significantly. The process of freeze-drying affected adversely the ability of vegetables to decrease oil oxidation of the emulsions. This may reflect loss of important natural antioxidants during the drying procedure.

  3. Neuro-fuzzy modeling to predict physicochemical and microbiological parameters of partially dried cherry tomato during storage: effects on water activity, temperature and storage time.

    Science.gov (United States)

    Tao, Yang; Li, Yong; Zhou, Ruiyun; Chu, Dinh-Toi; Su, Lijuan; Han, Yongbin; Zhou, Jianzhong

    2016-10-01

    In the study, osmotically dehydrated cherry tomatoes were partially dried to water activity between 0.746 and 0.868, vacuum-packed and stored at 4-30 °C for 60 days. Adaptive neuro-fuzzy inference system (ANFIS) was utilized to predict the physicochemical and microbiological parameters of these partially dried cherry tomatoes during storage. Satisfactory accuracies were obtained when ANFIS was used to predict the lycopene and total phenolic contents, color and microbial contamination. The coefficients of determination for all the ANFIS models were higher than 0.86 and showed better performance for prediction compared with models developed by response surface methodology. Through ANFIS modeling, the effects of storage conditions on the properties of partially dried cherry tomatoes were visualized. Generally, contents of lycopene and total phenolics decreased with the increase in water activity, temperature and storage time, while aerobic plate count and number of yeasts and molds increased at high water activities and temperatures. Overall, ANFIS approach can be used as an effective tool to study the quality decrease and microbial pollution of partially dried cherry tomatoes during storage, as well as identify the suitable preservation conditions.

  4. PERFORMANCE OF A FORCED CONVECTION SOLAR DRIER INTEGRATED WITH GRAVEL AS HEAT STORAGE MATERIAL FOR CHILI DRYING

    Directory of Open Access Journals (Sweden)

    M. MOHANRAJ

    2009-09-01

    Full Text Available An indirect forced convection solar drier integrated with different sensible heat storage maternal has been developed and tested its performance for drying chili under the metrological conditions of Pollachi, India. The system consists of a flat plate solar air heater with heat storage unit, a drying chamber and a centrifugal blower. Drying experiments have been performed at an air flow rate of 0.25 kg/s. Drying of chili in a forced convection solar drier reduces the moisture content from around 72.8% (wet basis to the final moisture content about 9.1% in 24 h. Average drier efficiency was estimated to be about 21%. The specific moisture extraction rate was estimated to be about 0.87 kg/kWh.

  5. Structural design concept and static analysis of CANDU spent fuel compact dry storage system

    Energy Technology Data Exchange (ETDEWEB)

    Choi, K. S.; Yang, K. H.; Paek, C. R.; Jung, J. S.; Lee, H. Y. [Korea Hydro and Nuclear Power Company, Taejon (Korea, Republic of)

    2003-07-01

    In this study, an structural design concept on CANDU spent fuel compact dry storage system MACSTOR/KN-400 module has been established with a view to optimally design the structural members of the system. Design loads, loading combination and structural safety criteria of the module were reviewed assuming W olsung Site. The static analysis of the module showed that compressive stress concentration due to dead load and live load occurred around the center of roof slab. Maximum stress resulted from dead load is about twice as much as the stress from live load, and structural behavior of module caused by wind load was not significant. The static analysis results will have influence on the reinforcement bar design of structural members with other structural analyses.

  6. Freeze-drying of HI-6-loaded recombinant human serum albumin nanoparticles for improved storage stability.

    Science.gov (United States)

    Dadparvar, Miriam; Wagner, Sylvia; Wien, Sascha; Worek, Franz; von Briesen, Hagen; Kreuter, Jörg

    2014-10-01

    Severe intoxications with organophosphates require the immediate administration of atropine in combination with acetyl cholinesterase (AChE) reactivators such as HI-6. Although this therapy regimen enables the treatment of peripheral symptoms, the blood-brain barrier (BBB) restricts the access of the hydrophilic antidotes to the central nervous system which could lead to a fatal respiratory arrest. Therefore, HI-6-loaded albumin nanoparticles were previously developed to enhance the transport across this barrier and were able to reactivate organophosphate-(OP)-inhibited AChE in an in vitro BBB model. Since HI-6 is known to be moisture-sensitive, the feasibility of freeze-drying of the HI-6-loaded nanoparticles was investigated in the present study using different cryo- and lyoprotectants at different concentrations. Trehalose and sucrose (3%, w/v)-containing formulations were superior to mannitol concerning the physicochemical parameters of the nanoparticles whereas trehalose-containing samples were subject of a prolonged storage stability study at temperatures between -20°C and +40°C for predetermined time intervals. Shelf-life computations of the freeze-dried HI-6 nanoparticle formulations revealed a shelf-life time of 18 months when stored at -20°C. The formulations' efficacy was proven in vitro by reactivation of OP-inhibited AChE after transport over a porcine brain capillary endothelial cell layer model.

  7. Effect of rainfall seasonality on carbon storage in tropical dry ecosystems

    Science.gov (United States)

    Rohr, Tyler; Manzoni, Stefano; Feng, Xue; Menezes, Rômulo S. C.; Porporato, Amilcare

    2013-07-01

    seasonally dry conditions are typical of large areas of the tropics, their biogeochemical responses to seasonal rainfall and soil carbon (C) sequestration potential are not well characterized. Seasonal moisture availability positively affects both productivity and soil respiration, resulting in a delicate balance between C deposition as litterfall and C loss through heterotrophic respiration. To understand how rainfall seasonality (i.e., duration of the wet season and rainfall distribution) affects this balance and to provide estimates of long-term C sequestration, we develop a minimal model linking the seasonal behavior of the ensemble soil moisture, plant productivity, related C inputs through litterfall, and soil C dynamics. A drought-deciduous caatinga ecosystem in northeastern Brazil is used as a case study to parameterize the model. When extended to different patterns of rainfall seasonality, the results indicate that for fixed annual rainfall, both plant productivity and soil C sequestration potential are largely, and nonlinearly, dependent on wet season duration. Moreover, total annual rainfall is a critical driver of this relationship, leading at times to distinct optima in both production and C storage. These theoretical predictions are discussed in the context of parameter uncertainties and possible changes in rainfall regimes in tropical dry ecosystems.

  8. The Feasibility of Cask "Fingerprinting" as a Spent-Fuel, Dry-Storage Cask Safeguards Technique

    Energy Technology Data Exchange (ETDEWEB)

    Ziock, K P; Vanier, P; Forman, L; Caffrey, G; Wharton, J; Lebrun, A

    2005-07-27

    This report documents a week-long measurement campaign conducted on six, dry-storage, spent-nuclear-fuel storage casks at the Idaho National Laboratory. A gamma-ray imager, a thermal-neutron imager and a germanium spectrometer were used to collect data on the casks. The campaign was conducted to examine the feasibility of using the cask radiation signatures as unique identifiers for individual casks as part of a safeguards regime. The results clearly show different morphologies for the various cask types although the signatures are deemed insufficient to uniquely identify individual casks of the same type. Based on results with the germanium spectrometer and differences between thermal neutron images and neutron-dose meters, this result is thought to be due to the limitations of the extant imagers used, rather than of the basic concept. Results indicate that measurements with improved imagers could contain significantly more information. Follow-on measurements with new imagers either currently available as laboratory prototypes or under development are recommended.

  9. Irradiation Maintains Functional Components of Dry Hot Peppers (Capsicum annuum L. under Ambient Storage

    Directory of Open Access Journals (Sweden)

    Qumer Iqbal

    2016-09-01

    Full Text Available Hot peppers used as natural flavoring and coloring agents are usually irradiated in prepacked form for decontamination. The effects of gamma radiation on the stability of functional components such as capsaicinoids and antioxidant compounds (carotenoids, ascorbic acid and total phenolics were investigated in hot peppers (Capsicum annuum. Whole dried peppers packed in polyethylene bags were gamma irradiated at 0 (control, 2, 4, and 6 kGy and subsequently stored at 25 °C for 90 days. The irradiation dose did not substantially affect the initial contents of capsaicinoids, ascorbic acid and total phenolics, though the concentration of carotenoids declined by 8% from the control (76.9 mg/100 g to 6 kGy radiation dose (70.7 mg/100 g. Similarly, during storage for 90 days at ambient temperature the concentrations of capsaicinoids and total phenolics remained fairly stable with mean percent reductions from 3.3% to 4.2%, while the levels of total carotenoids and ascorbic acid significantly (p < 0.05 declined by 12% and 14%, respectively. Overall, neither irradiation nor subsequent ambient storage could appreciably influence the contents of functional components in hot peppers. These results revealed that gamma irradiation up to 6 kGy can be safely used for decontamination to meet the needs for overseas markets without compromising product quality.

  10. Sunflower seedlings dry matter content as affected by chemical treatment and storage length

    Directory of Open Access Journals (Sweden)

    Mrđa Jelena

    2011-01-01

    Full Text Available Chemical treatment of seed is a common crop protection measure. In the case of sunflower seed, fungicides are used regularly and insecticides at an increasing rate. In some cases, sunflower hybrid seed not planted in the first year is planted in the second or even third year after production. Seed vigour decreases gradually over time, which negatively affects seed emergence and subsequent plant growth and development. Seed with high vigour is expected to germinate quickly, producing seedlings that grow fast and uniformly. The objective of this study was to assess the effects of seed chemical treatment and storage length on seedling dry matter content in different sunflower hybrids. The study included several variants with fungicide and pesticide treatments and an untreated control. In the case of the hybrid NS-H-111, highest values of the studied characteristic were recorded in the control and directly after chemical treatment. In the case of the hybrid Sremac, the lowest value was recorded in seed treatment with benomyl+metalaxyl, highest in the treatments directly after chemical treatment and in seed stored for six months. In the case of the hybrid Šumadinac, highest values were recorded in the control and in seed treatment with fludioxonil+metalaxyl, the lowest in seed treatment with fludioxonil+metalaxyl+im idacloprid. Regarding the effect of different seed storage periods, highest values of the studied characteristic were recorded shortly after chemical treatment and in seed stored for six months.

  11. Sodium and Lithium Storage Properties of Spray-Dried Molybdenum Disulfide-Graphene Hierarchical Microspheres

    Science.gov (United States)

    Kalluri, Sujith; Seng, Kuok Hau; Guo, Zaiping; Du, Aijun; Konstantinov, Konstantin; Liu, Hua Kun; Dou, Shi Xue

    2015-07-01

    Developing nano/micro-structures which can effectively upgrade the intriguing properties of electrode materials for energy storage devices is always a key research topic. Ultrathin nanosheets were proved to be one of the potential nanostructures due to their high specific surface area, good active contact areas and porous channels. Herein, we report a unique hierarchical micro-spherical morphology of well-stacked and completely miscible molybdenum disulfide (MoS2) nanosheets and graphene sheets, were successfully synthesized via a simple and industrial scale spray-drying technique to take the advantages of both MoS2 and graphene in terms of their high practical capacity values and high electronic conductivity, respectively. Computational studies were performed to understand the interfacial behaviour of MoS2 and graphene, which proves high stability of the composite with high interfacial binding energy (-2.02 eV) among them. Further, the lithium and sodium storage properties have been tested and reveal excellent cyclic stability over 250 and 500 cycles, respectively, with the highest initial capacity values of 1300 mAh g-1 and 640 mAh g-1 at 0.1 A g-1.

  12. Performance and Storage Integrity of Dried Blood Spots for PCB, BFR and Pesticide Measurements

    Science.gov (United States)

    Batterman, Stuart; Chernyak, Sergei

    2014-01-01

    Dried blood spots (DBS) can provide accurate and valuable estimates of exposure to environmental toxicants, and the use of information derived from archived newborn DBS information has enormous potential to open up new research on the impacts of early chemical exposure on disease. Broad application of DBS for the purpose of quantitative exposure estimation requires robust and validated methods. This study investigates the suitability of DBS analyses for population studies of exposure to three chemical groups: polychlorinated biphenyls (PCBs), brominated flame retardants (BFRs), and chlorinated pesticides. It examines background (matrix) contamination, recovery and extraction variability, sensitivity, and storage stability. DBS samples prepared using 50 μL of adult blood were analyzed by GC/MS, and method performance was confirmed by using certified materials and paired DBS-blood samples from six volunteers. Several of the target compounds and their degradation products have not been previously measured in DBS. All target compounds were detected in DBS samples collected from the volunteers. Sample DBS cards showed background contamination of several compounds. When stored at room temperature, target compounds, excluding PBDEs, were stable for up to one month. When refrigerated or frozen, stability was acceptable for all compounds up to one year, and multiyear storage appears acceptable at colder (e.g., −80 °C) temperatures. Multicompartment models may be used to estimate or correct for storage losses. Considering concentrations of contaminants for adults and children reported in the literature, and experimental values of detection limits and background contamination, DBS samples are suitable for quantifying exposures to many PCBs, BFRs and persistent pesticides. PMID:25058892

  13. The potato dry rot causal agent and severity in Ardabil storages and the resistance of cultivars to the disease

    Directory of Open Access Journals (Sweden)

    Leila Khoshnevis

    2016-09-01

    Full Text Available Introduction: Dry rot is one of the most important diseases of potato in storages. The aim of this study was to determine dry rot severity in potato storages of Ardabil, identify the disease causal agents and evaluate some potato cultivars resistance to the disease. Materials and methods: Totally 150 infected samples were collected from thirty nine studied storages in Ardabil. Dry rot severity and the prevalence of infected tubers were determined by surveying three 50 kg bags of potato in the storages. Fungi isolated and purified from the tubers with dry rot symptoms. A factorial design with four replications was applied in order to evaluate the reaction of five potato cultivars to four Fusarium species and determining the resistant one to dry rot. Potato tuber slices were inoculated by conidial suspension of Fusarium species. Four days after inoculation and maintaining in darkness and 25oC, the cultivars susceptibility was  identified. Results: Four species of Fusarium were identified as dry rot causal agents in Ardabil as follows: F. oxysporum, F. poae, F. solani and F. sporotrichioides. There was no significant difference between Fusarium species in pathogenicity. The reaction of cultivars to various Fusarium species was different. Boren had the lowest infection (12.5% and Sabalan showed the highest (98.87 %. Sabalan ،Khavaran ،Agria and hybrid line 3970093 displayed the highest susceptibility to various studied Fusarium species. Discussion and conclusion: Based on the results, Boren is introduced as the most resistant cultivar to Fusarium dry rot and Sabalan, Agria and hybrid line 3970093 as the susceptible ones.

  14. The Effect of Storage and Extraction Methods on Amplification of Plasmodium falciparum DNA from Dried Blood Spots

    NARCIS (Netherlands)

    Schwartz, A.; Baidjoe, A.Y.; Rosenthal, P.J.; Dorsey, G.; Bousema, T.; Greenhouse, B.

    2015-01-01

    Extraction and amplification of DNA from dried blood spots (DBS) collected in field studies is commonly used for detection of Plasmodium falciparum. However, there have been few systematic efforts to determine the effects of storage and extraction methods on the sensitivity of DNA amplification. We

  15. Long-term effects of drying conditions on the essential oil and color of tarragon leaves during storage

    NARCIS (Netherlands)

    ArabHosseini, A.; Boxtel, van A.J.B.; Huisman, W.; Muller, J.

    2007-01-01

    The effect of storage on the essential oil content and color of French Tarragon (Artemisia dracunculus L.) leaves is studied. Tarragon leaves were dried at temperatures 45, 60 and 90 °C with, respectively, the relative humidity levels 17%, 7% and 2.5%. At 60 °C also a relative humidity level of 18%

  16. 78 FR 67348 - Invitation for Public Comment on Draft Test Plan for the High Burnup Dry Storage Cask Research...

    Science.gov (United States)

    2013-11-12

    ...: U.S. Department of Energy, C/O Melissa Bates, 1955 Freemont Ave., MS 1235, Idaho Falls, ID 83415..., 1955 Fremont Ave., Attn: Melissa Bates, Idaho Falls, ID, between 8 a.m. and 3:30 p.m. MT, Monday.... Melissa Bates, Contracting Officers Representative, High Burnup Dry Storage Cask Research and...

  17. A model on the effect of temperature and moisture on pollen longevity in air-dry storage environments

    NARCIS (Netherlands)

    Hong, T.D.; Ellis, R.H.; Buitink, J.; Walters, J.; Hoekstra, F.A.; Crane, J.

    1999-01-01

    Data on the survival of pollen ofTypha latifoliaL. stored for up to 261 d over seven different saturated salt solutions (providing 0.5 to 66% relative humidity) and six different constant temperatures (from −5 to +45 °C) were analysed to quantify the effect of air-dry storage environment on pollen l

  18. Evaluation of a solar-biomass-rock bed storage drying system, and its application for chilli drying

    Energy Technology Data Exchange (ETDEWEB)

    Augustus Leon, M.; Kumar, S. [Energy Field of Study, Asian Inst. of Tech. Klong Luang, Pathumthani (Thailand)

    2008-07-01

    A renewable energy-based air heating system that does not require a conventional auxiliary heater, but can still meet a daily load fraction exceeding 90% and supply hot air at a steady temperature and flow rate continuously for 24 hours a day, has been developed. It combines an unglazed transpired solar collector (UTC), rock bed, and a biomass gasifier stove with heat exchanger. The system utilises part of the rock bed to supply supplementary heat. The UTC supplies the required hot air during the day (to meet the load), and the stove-heat exchanger unit supplies hot air to the rock bed (to charge it), also during the daytime. The rock bed stores the thermal energy during the daytime, and supplies heat during off-sunshine hours - both during day and night. The system was evaluated by drying 22 kg of red chilli, using hot air at 60 C and 90 m{sup 3}/h, from an initial moisture content of 76.7% (w.b) to 8.4% over 32.5 hours of continuous drying. The dryer contributed to a reduction of 66% in drying time compared to open sun drying. The temperature of hot air supplied was stable at 60{+-}3 C for over 24 hours during the entire drying duration. Providing a load fraction of 91.6% during the 24-hour operation, the air heating system can successfully dry red chilli in a continuous drying operation, at required air temperature and flow rate, which can be maintained fairly constant. (orig.)

  19. Acoustic emission detection with fiber optical sensors for dry cask storage health monitoring

    Science.gov (United States)

    Lin, Bin; Bao, Jingjing; Yu, Lingyu; Giurgiutiu, Victor

    2016-04-01

    The increasing number, size, and complexity of nuclear facilities deployed worldwide are increasing the need to maintain readiness and develop innovative sensing materials to monitor important to safety structures (ITS). In the past two decades, an extensive sensor technology development has been used for structural health monitoring (SHM). Technologies for the diagnosis and prognosis of a nuclear system, such as dry cask storage system (DCSS), can improve verification of the health of the structure that can eventually reduce the likelihood of inadvertently failure of a component. Fiber optical sensors have emerged as one of the major SHM technologies developed particularly for temperature and strain measurements. This paper presents the development of optical equipment that is suitable for ultrasonic guided wave detection for active SHM in the MHz range. An experimental study of using fiber Bragg grating (FBG) as acoustic emission (AE) sensors was performed on steel blocks. FBG have the advantage of being durable, lightweight, and easily embeddable into composite structures as well as being immune to electromagnetic interference and optically multiplexed. The temperature effect on the FBG sensors was also studied. A multi-channel FBG system was developed and compared with piezoelectric based AE system. The paper ends with conclusions and suggestions for further work.

  20. Multi-criteria decision analysis of concentrated solar power with thermal energy storage and dry cooling.

    Science.gov (United States)

    Klein, Sharon J W

    2013-12-17

    Decisions about energy backup and cooling options for parabolic trough (PT) concentrated solar power have technical, economic, and environmental implications. Although PT development has increased rapidly in recent years, energy policies do not address backup or cooling option requirements, and very few studies directly compare the diverse implications of these options. This is the first study to compare the annual capacity factor, levelized cost of energy (LCOE), water consumption, land use, and life cycle greenhouse gas (GHG) emissions of PT with different backup options (minimal backup (MB), thermal energy storage (TES), and fossil fuel backup (FF)) and different cooling options (wet (WC) and dry (DC). Multicriteria decision analysis was used with five preference scenarios to identify the highest-scoring energy backup-cooling combination for each preference scenario. MB-WC had the highest score in the Economic and Climate Change-Economy scenarios, while FF-DC and FF-WC had the highest scores in the Equal and Availability scenarios, respectively. TES-DC had the highest score for the Environmental scenario. DC was ranked 1-3 in all preference scenarios. Direct comparisons between GHG emissions and LCOE and between GHG emissions and land use suggest a preference for TES if backup is require for PT plants to compete with baseload generators.

  1. Study and Test of Cold Storage Heat Recovery Heat Pump Coupled Solar Drying Device

    Directory of Open Access Journals (Sweden)

    Min Li

    2013-05-01

    Full Text Available In this study, we design the recovery of a heat pump combined solar drying device. Then, with this device, drying experiments of aquatic product, tilapia, were conducted, indicating that the newly designed device functions are well in temperature adjusting and controlling performance and showing that drying time is closely related to energy consumption and drying conditions. Heat recovery heat pump combined solar energy drier can improve the drying quality of aquatic products, but also can greatly reduce the drying energy consumption, which provides theoretical support to the design and processing of heat recovery heat pump of refrigeration system coupled solar drying device.

  2. Thermal modeling of a vertical dry storage cask for used nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jie, E-mail: jieli@anl.gov; Liu, Yung Y., E-mail: yyliu@anl.gov

    2016-05-15

    Graphical abstract: - Highlights: • Thermal performance of a 3-D vertical dry cask under various conditions has been numerically studied by using ANSYS/FLUENT code. • The simulation was validated by comparing the results against data obtained from the temperature measurements of a commercial cask. • The results indicated that the basket with higher thermal conductivity dissipates decay heat out of the cask more efficiently than that with a lower thermal conductivity (aluminum composite vs. stainless steel). A heavier cooling gas is also helpful to enhance heat transfer via enhanced natural convection (N{sub 2} vs. He). • Coolant release from the fuel canister results in temperature change of the canister external surfaces. The simulation shows that such a change is large enough and detectable, which can provide a mechanism for leak detection by continuously monitoring this temperature change at the top center of the canister surface. • Partial blockage of the cask air inlets affects the temperature profiles marginally for both the fuel canister and those components inside. In contrast, fully blocked air inlets will lead to remarkable increases of the component temperatures. - Abstract: Thermal modeling of temperature profiles of dry casks has been identified as a high-priority item in a U.S. Department of Energy gap analysis. In this work, a three-dimensional model of a vertical dry cask has been constructed for computer simulation by using the ANSYS/FLUENT code. The vertical storage cask contains a welded canister for 32 Pressurized Water Reactor (PWR) used-fuel assemblies with a total decay heat load of 34 kW. To simplify thermal calculations, an effective thermal conductivity model for a 17 × 17 PWR used (or spent)-fuel assembly was developed and used in the simulation of thermal performance. The effects of canister fill gas (helium or nitrogen), internal pressure (1–6 atm), and basket material (stainless steel or aluminum alloy) were studied to

  3. Protective coatings for the Ontario Power Generation Inc. dry storage container

    Energy Technology Data Exchange (ETDEWEB)

    Lewak, R. [Kinectrics Inc., Toronto, Ontario (Canada)]. E-mail: richard.lewak@kinectrics.com; Ellsworth, B. [Ontario Power Generation Inc., Tiverton, Ontario (Canada)]. E-mail: brad.ellsworth@opg.com

    2006-07-01

    Ontario Power Generation (OPG), formerly Ontario Hydro, has been storing used CANDU fuel in the irradiated fuel bays (IFBs) at its nuclear generating stations since they began operation. As the IFBs began reaching capacity, the dry storage of previously cooled used fuel became an economically viable alternative to the construction of additional wet fuel bays and the OPG Dry Storage Container (DSC) was developed. The OPG DSC is a free standing reinforced concrete container, with an inner and outer carbon steel shell, for the storage and transportation of used CANDU fuel. The outer steel shell of the DSC is protected by an applied coating system to facilitate decontamination of the outer shell and to provide protective corrosion resistance. In 1990 a study was performed to determine the optimal commercial coating system to be considered as a protective coating on the DSC outer shell. An experimental program was undertaken to identify the optimal commercial coating system, which had the best decontamination characteristics as well as maximum resistance to abrasion, weathering and durability. A total of nine coating systems were selected for study, five epoxy coatings, three epoxy/polyurethane coatings, and one polyurethane coating. Sand blasted carbon steel coupons, similar to the DSC outer shell, were coated by the manufacturers and submitted for testing of the decontamination characteristics such as activity uptake, decontamination of the coating, and the activity 'sweating' phenomenon. Tests identified four commercially available pure epoxy and epoxy/polyurethane protective coating systems as being the most promising for the exterior of the DSC surface. Of these four, the coating system chosen for use on the DSC was an epoxy/polyurethane system. After a decade of use, however, several safety and environmental concerns centering on the isocyanate content present in the polyurethane and the Volatile Organic Component (VOC) content of the coating system have

  4. Characterization of physical and viscoelastic properties of polymer films for coating applications under different temperature of drying and storage.

    Science.gov (United States)

    Perfetti, G; Jansen, K M B; Wildeboer, W J; van Hee, P; Meesters, G M H

    2010-01-15

    The increasing tendency to enhance consumer products with added functionality is leading to ever more complex products. Nowadays more and more particulate products are coated to give the product specific functionalities. An appropriate approach is needed to be able to satisfy customer's requirements. In this work, three reference well-known coating agents, namely two grades of hydroxypropyl methylcellulose (HPMC) and one polyvinyl alcohol (PVA) were selected and investigated. Aqueous solutions of such polymers were obtained and viscosity and shear stress were measured function of shear rate, temperature and polymer concentration. The viscosities of the solutions appear to be mainly shear rate independent, they clearly show Newtonian behaviour. Drying and storage conditions influence on morphology and structure of the cast films were evaluated using scanning electron microscope (SEM). Dynamic mechanical thermal analysis (DMTA) experiments were carried out on HPMC and PVA cast films to assess the viscoelastic properties over wide temperature-frequency range. The time-temperature superposition principle was used to determine the shift factor, aT, and to compose a master curve. Magnitudes and profiles of storage modulus, E', loss modulus, E'', and tan delta master curves are discussed with relation to drying and storage conditions. No impact of drying temperature on the polymer properties was observed whereas the effect of storage temperature resulted to be relevant in terms of shifts in glass transition temperature and, only partially, changes in the magnitudes of E' and E''.

  5. Study and Test of Cold Storage Heat Recovery Heat Pump Coupled Solar Drying Device

    OpenAIRE

    Min Li; Xiao-Qiang Jiang; Bao-Chuan Wu

    2013-01-01

    In this study, we design the recovery of a heat pump combined solar drying device. Then, with this device, drying experiments of aquatic product, tilapia, were conducted, indicating that the newly designed device functions are well in temperature adjusting and controlling performance and showing that drying time is closely related to energy consumption and drying conditions. Heat recovery heat pump combined solar energy drier can improve the drying quality of aquatic products, but also can gr...

  6. Drying of Rhinacanthus nasutus (Linn. Kurz. using a solar dryer incorporated with a backup thermal energy storage from wood combustion

    Directory of Open Access Journals (Sweden)

    Perapong Tekasakul

    2006-05-01

    Full Text Available An indirect, natural convection, solar cabinet dryer incorporated with a backup thermal energy storage from wood combustion was designed and tested with the Thai herb, Rhinacanthus nasutus (Linn. Kurz. Most of Thai herbs are widely used as traditional medicine and drying is an initial step in the production process. Solar dryer with a biomass backup heating system is the most feasible solution to drying in Thailand. In this work, a 4 m x 5 m solar collector was used to absorb solar radiation for heating the incoming air during the daytime, while a biomass burner was used to supply heat when solar energy was not possible. Heat from fuelwood combustion was accumulated in the thermal storage system made of bricks, and was used to heat up the incoming air. Results showed that the herb was dried uniformly and the temperature inside the drying cabinet could be maintained above 50ºC for more than 10 hours. Thermal efficiency when using solar energy was 10.5%, but the value was less than 1% when using the heat from biomass burning. This resulted from the low moisture content of the products after being dried by the solar energy. The dryer is beneficial to the operators, particularly in southern Thailand, where continuous drying is required. This dryer is by no means limited to drying of the herb. Currently, four dryers of the same model have been used by farmer groups in southern Thailand for drying bananas, several types of herbs, fish, and other products. In economic consideration, its payback period is 5.5 years when compared with the LPG-equipped dryer. When the total cost and production capacity are considered, its payback period is about 6 years.

  7. MACSTOR, an on-site, dry, spent-fuel storage system developed by AECL for use by U. S. utilities

    Energy Technology Data Exchange (ETDEWEB)

    Durante, R.; Feinroth, H.; Pattanyus, P. (AECL Technologies, Bethesda, MD (United States))

    1992-01-01

    The continuing delay in the U.S. Department of Energy's Yucca Mountain and monitored retrievable storage spent-fuel disposal and storage programs has prompted U.S. utilities to consider expanding on-site storage of spent reactor fuel. Long-term, on-site storage has certain advantages to U.S. utilities since it eliminates the need for costly and difficult shipping and puts control of the spent fuel completely under the direction of the owner-utility. AECL Technologies (AECL), through its research company and Canada deuterium uranium (CANDU) engineering services division, has been developing on-site storage for Canadian heavy water nuclear plants for almost 20 yr. AECL has developed a design for a dry storage unit, designated MACSTOR (modular air-cooled storage), that can accommodate U.S. light water reactor (LWR) fuel elements and could become a candidate for the U.S. market. This paper describes MACSTOR and its evolution from the original silos and CANSTOR system that was developed and used in Canada. These systems are subject to regulatory controls by the Atomic Energy Control Board of Canada and have proven to be safe, convenient, and cost effective.

  8. The application of mature dry storage technology and remote handling robotics to nuclear plant extension, clean-up and decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, W.C. [GEC ALSTHOM Engineering Systems Ltd., Leicester (United Kingdom)

    1997-08-01

    This paper reviews a mature dry storage technology developed by GEC ALSTHOM Engineering Systems Limited (GAES) which offers a passive, economical and licensable method of providing irradiated fuel storage capacity at operational nuclear power stations. The evolution of the modular vault dry store (MVDS) technology has taken place over 25 years of operational experience, culminating in a product which meets all of the concerns of licensing authorities regarding safety and fuel integrity. The application of remote handling robotics to nuclear fuel and active component handling as a routine process rather than as an intervention technique is also reviewed. The growth of the application of this technology is governed by several factors which include: statutory requirements, safety assurance, risk reduction and economic pressures. The availability of a mature MVDS technology with an evolving process-capable robotics technology opens up opportunities for exploring proven UK products. (Author).

  9. Identification of Components or Fractions Associated with Adverse Changes in Freeze Dried Chicken and Pork during Storage

    Science.gov (United States)

    1978-06-01

    of glucose by yeast fermentation . Food Techmol. 9: 290 (1955). 12 Fleming, I. E. and H. F. Pegler. The determination of glucose in the pre.- ence of...Amerine et al., 1965). 17 Osman, 0. A. H. and R. E. Morse. Preparation and storage characteristics of freeze dried sausages . I. Formulation and...processing of comminuted sausages (frankfurters). Food Technol. 14: 37 (Abstract) (1960). 1Amerine, M. A., R. M. Pangborn, and E. P. Roessler. Principles of

  10. CFD Analysis on the Passive Heat Removal by Helium and Air in the Canister of Spent Fuel Dry Storage System

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Do Young; Jeong, Ui Ju; Kim, Sung Joong [Hanyang University, Seoul (Korea, Republic of)

    2016-05-15

    In the current commercial design, the canister of the dry storage system is mainly backfilled with helium gas. Helium gas shows very conductive behavior due to high thermal conductivity and small density change with temperature. However, other gases such as air, argon, or nitrogen are expected to show effective convective behavior. Thus these are also considered as candidates for the backfill gas to provide effective coolability. In this study, to compare the dominant cooling mechanism and effectiveness of cooling between helium gas and air, a computational fluid dynamics (CFD) analysis for the canister of spent fuel dry storage system with backfill gas of helium and air is carried out. In this study, CFD simulations for the helium and air backfilled gas for dry storage system canister were carried out using ANSYS FLUENT code. For the comparison work, two backfilled fluids were modeled with same initial and boundary conditions. The observed major difference can be summarized as follows. - The simulation results showed the difference in dominant heat removal mechanism. Conduction for helium, and convection for air considering Reynolds number distribution. - The temperature gradient inside the fuel assembly showed that in case of air, more effective heat mixing occurred compared to helium.

  11. Listeria monocytogenes presence during fermentation, drying and storage of Petrovská klobása sausage

    Science.gov (United States)

    Janković, V.; Mitrović, R.; Lakićević, B.; Velebit, B.; Baltić, T.

    2017-09-01

    The majority of human listeriosis cases appear to be caused by consumption of ready-to-eat (RTE) foods contaminated at the time of consumption with high levels of Listeria monocytogenes. Although strategies to prevent growth of L. monocytogenes in RTE products are critical for reducing the incidence of human listeriosis, this pathogen is highly difficult to control in fermented sausage processing environments due to its high tolerance to low pH and high salt concentration. The aims of the present study were to investigate the occurrence, presence and elimination of L. monocytogenes in Petrovská klobása sausage during processing, fermentation, drying and storage. L. monocytogenes, which was detected at the beginning of the production cycle, disappeared before day 30. The pathogen decline was much faster in those sausages which were dried in controlled, industrial conditions than in those dried applying the traditional, household technique.

  12. Feasibility study in aspect of thermal integrity on the dry storage expansion options for CANDU spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. H.; Yoon, J. H.; Choi, B. I.; Lee, H. Y.; Song, M. J. [Nuclear Environment Technology Institute, Taejon (Korea, Republic of); Cho, K. S. [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2002-10-01

    In order to expand the capability of the CANDU spent fuel dry storage facilities of the at Wolsong, the alternative concepts based on MACSTOR are suggested to replace with existing concrete silo of Wolsong. For this, the feasibility of its design changes from original MACSTOR is examined in term of heat transfer and thermal hydraulic. In this study, the configuration of the module was conceptually changed from its original 2 rows to 3 and 4 rows for review. Under normal operation, the results of heat transfer and thermal hydraulic shows that storage module can feasibly accomodate four rows of storage cylinders within allowable range in terms of maximum allowable temperature of the fuel basket.

  13. Managing aging effects on dry cask storage systems for extended long-term storage and transportation of used fuel - rev. 0

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O.K.; Diercks, D.; Fabian, R.; Ma, D.; Shah, V.; Tam, S.W.; Liu, Y. (Decision and Information Sciences); ( EVS); ( NE)

    2012-07-06

    The cancellation of the Yucca Mountain repository program in the United States raises the prospect of extended long-term storage (i.e., >120 years) and deferred transportation of used fuel at operating and decommissioned nuclear power plant sites. Under U.S. federal regulations contained in Title 10 of the Code of Federal Regulations (CFR) 72.42, the initial license term for an Independent Spent Fuel Storage Installation (ISFSI) must not exceed 40 years from the date of issuance. Licenses may be renewed by the U.S. Nuclear Regulatory Commission (NRC) at the expiration of the license term upon application by the licensee for a period not to exceed 40 years. Application for ISFSI license renewals must include the following: (1) Time-limited aging analyses (TLAAs) that demonstrate that structures, systems, and components (SSCs) important to safety will continue to perform their intended function for the requested period of extended operation; and (2) a description of the aging management program (AMP) for management of issues associated with aging that could adversely affect SSCs important to safety. In addition, the application must also include design bases information as documented in the most recent updated final safety analysis report as required by 10 CFR 72.70. Information contained in previous applications, statements, or reports filed with the Commission under the license may be incorporated by reference provided that those references are clear and specific. The NRC has recently issued the Standard Review Plan (SRP) for renewal of used-fuel dry cask storage system (DCSS) licenses and Certificates of Compliance (CoCs), NUREG-1927, under which NRC may renew a specific license or a CoC for a term not to exceed 40 years. Both the license and the CoC renewal applications must contain revised technical requirements and operating conditions (fuel storage, surveillance and maintenance, and other requirements) for the ISFSI and DCSS that address aging effects that

  14. Effects of the concrete crack on radiation shielding in spent fuel dry storage facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Min

    2007-02-15

    rays in a concrete structure with collinear cracks. In the case of abnormal state, the effect of spalling due to reinforcement corrosion on the shielding performance is estimated by numerical analysis. And because dry storage system for PWR is not decided yet, these effects applied to MACSTOR-400. In case that cover thickness is under 10cm, it is estimated that spalling will be formed. Nevertheless, if the thickness of wall in MACSTOR-400 is 100cm, it is estimated that surface dose rate will be maintained below the radiation safety standards. Dose rate at Wolsung site boundary where MACSTOR-400 is located regarding the effect of concrete cracking was estimated. This estimation is based on experimental results as mentioned above. This estimation is based on experimental results. In order to estimate dose rate at site boundary, the radiological effect of other facility in same site and the effect due to arrangement is considered. It is estimated that the dose rate increasing due to cracking is up to 25%. It seems that the additional shielding effect due to the 'mutual shielding effect' will be expected about 55-60%. It is estimated that the contribution from NPPs to dose rate are the most dominant. Concrete silo has surface dose rate lower than that of MACSTOR, however, because the number of concrete silo is much more than MACSTOR, it is estimated that contribution from concrete silo is more that that of MACSTOR-400. Although operation time of NPPs, it is estimated that dose rate is maintained under criteria, regardless of crack formation. The results of this study can be applied to assess the surface dose rate of concrete shield for collinear crack, and not irregular cracks with bends. However, they may be used to establish a standard for radiological safety in shielding structures, especially shielding margin. This study does not consider buildup factor. In order to be used in the industrial fields, a study on the effect of cracking on buildup is required

  15. Managing aging effects on dry cask storage systems for extended long-term storage and transportation of used fuel - rev. 0

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O.K.; Diercks, D.; Fabian, R.; Ma, D.; Shah, V.; Tam, S.W.; Liu, Y. (Decision and Information Sciences); ( EVS); ( NE)

    2012-07-06

    The cancellation of the Yucca Mountain repository program in the United States raises the prospect of extended long-term storage (i.e., >120 years) and deferred transportation of used fuel at operating and decommissioned nuclear power plant sites. Under U.S. federal regulations contained in Title 10 of the Code of Federal Regulations (CFR) 72.42, the initial license term for an Independent Spent Fuel Storage Installation (ISFSI) must not exceed 40 years from the date of issuance. Licenses may be renewed by the U.S. Nuclear Regulatory Commission (NRC) at the expiration of the license term upon application by the licensee for a period not to exceed 40 years. Application for ISFSI license renewals must include the following: (1) Time-limited aging analyses (TLAAs) that demonstrate that structures, systems, and components (SSCs) important to safety will continue to perform their intended function for the requested period of extended operation; and (2) a description of the aging management program (AMP) for management of issues associated with aging that could adversely affect SSCs important to safety. In addition, the application must also include design bases information as documented in the most recent updated final safety analysis report as required by 10 CFR 72.70. Information contained in previous applications, statements, or reports filed with the Commission under the license may be incorporated by reference provided that those references are clear and specific. The NRC has recently issued the Standard Review Plan (SRP) for renewal of used-fuel dry cask storage system (DCSS) licenses and Certificates of Compliance (CoCs), NUREG-1927, under which NRC may renew a specific license or a CoC for a term not to exceed 40 years. Both the license and the CoC renewal applications must contain revised technical requirements and operating conditions (fuel storage, surveillance and maintenance, and other requirements) for the ISFSI and DCSS that address aging effects that

  16. Cell viability of microencapsulated Bifidobacterium animalis subsp. lactis under freeze-drying, storage and gastrointestinal tract simulation conditions.

    Science.gov (United States)

    Shamekhi, Fatemeh; Shuhaimi, Mustafa; Ariff, Arbakariya; Manap, Yazid A

    2013-03-01

    The purpose of this study was to improve the survival of Bifidobacterium animalis subsp. lactis 10140 during freeze-drying process by microencapsulation, using a special pediatric prebiotics mixture (galactooligosaccharides and fructooligosaccharides). Probiotic microorganisms were encapsulated with a coat combination of prebiotics-calcium-alginate prior to freeze-drying. Both encapsulated and free cells were then freeze-dried in their optimized combinations of skim milk and prebiotics. Response surface methodology (RSM) was used to produce a coating combination as well as drying medium with the highest cell viability during freeze-drying. The optimum encapsulation composition was found to be 2.1 % Na-alginate, 2.9 % prebiotic, and 21.7 % glycerol. Maximum survival predicted by the model was 81.2 %. No significant (p > 0.05) difference between the predicted and experimental values verified the adequacy of final reduced models. The protection ability of encapsulation was then examined over 120 days of storage at 4 and 25 °C and exposure to a sequential model of infantile GIT conditions including both gastric conditions (pH 3.0 and 4.0, 90 min, 37 °C) and intestinal conditions (pH 7.5, 5 h, 37 °C). Significantly improved cell viability showed that microencapsulation of B. lactis 10140 with the prebiotics was successful in producing a stable symbiotic powdery nutraceutical.

  17. Dry-fermented chicken sausage produced with inulin and corn oil: physicochemical, microbiological, and textural characteristics and acceptability during storage.

    Science.gov (United States)

    Menegas, Léia Zenaide; Pimentel, Tatiana Colombo; Garcia, Sandra; Prudencio, Sandra Helena

    2013-03-01

    This study aimed to evaluate the effect of oil content reduction and the addition of inulin as a partial oil substitute on the physicochemical, microbiological, and textural characteristics and acceptability during the storage (4 °C for 45 days) of dry-fermented chicken sausage produced with corn oil. Reducing the oil content did not influence the characteristics evaluated but tended to produce sausage with a dark reddish coloration. The addition of inulin did not change the physicochemical and microbiological parameters or the acceptability of the products, but resulted in an altered texture profile and a tendency toward lighter and less reddish coloration, similar to products with standard oil content. Fermented chicken sausages produced with standard amounts of corn oil, reduced amounts of corn oil, and inulin as a partial oil replacement remained stable without a significant loss of physical, chemical, microbiological, or sensory attributes during storage at 4 °C for 45 days.

  18. Flavor retention of peppermint (Mentha piperita L.) essential oil spray-dried in modified starches during encapsulation and storage.

    Science.gov (United States)

    Baranauskiene, Renata; Bylaite, Egle; Zukauskaite, Jurate; Venskutonis, Rimantas P

    2007-04-18

    The effect of different commercial modified food starch carrier materials on the flavor retention of the essential oil (EO) of peppermint (Mentha piperita L.) during spray drying and storage was evaluated. The obtained results revealed that the emulsification and encapsulation efficiencies of peppermint EO were higher for all n-octenyl succinic anhydride (OSAN)-modified starches as compared to those of hydrolyzed starches (dextrins). The compositions of pure, emulsified, and encapsulated peppermint EOs in different matrices were quite similar; however, some changes in the percentages of some individual compounds were observed. Larger differences in the compositions of surface oils from various encapsulation products were obtained. Flavor components were released at different rates by each of the encapsulated products. The aroma binding capacity of different modified starch matrices to lock EO droplets depends on the water activity, and the leakage of aromas from encapsulated powder products during storage increased with increasing water activity.

  19. Numerical analysis of temperature and flow effects in a dry, one-dimensional aquifer used for compressed air energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Smith, G.C.; Wiles, L.E.; Loscutoff, W.V.

    1979-02-01

    A detailed description of the method of analysis and the results obtained for an investigation of the hydrodynamic and thermodynamic response of a model of a dry porous media reservoir used for compressed air energy storage (CAES) is presented. Results were obtained from a one-dimensional simulation of the cycling of heated air to and from a radial flow field surrounding a single well in a porous rock. It was assumed that the performance of the bulk of the reservoir could be characterized by the performance of a single well.

  20. Effects of Freeze-dried Mulberry on Antioxidant Activities and Fermented Characteristics of Yogurt during Refrigerated Storage

    OpenAIRE

    2015-01-01

    This study investigated the effect of added freeze-dried mulberry fruit juice (FDMJ) (1, 3 and 5%) on the antioxidant activity and fermented characteristic of yogurt during refrigerated storage. A decrease in pH of yogurt and increase in acidity was observed during fermentation. The yogurts with FDMJ exhibited faster rate of pH reduction than control. Initial lactic acid bacteria count of yogurt was 6.49-6.94 Log CFU/g and increased above 9 Log CFU/g in control and 1% in FDMJ yogurt for 24 h....

  1. Effects of Dry Storage and Resubmersion of Oysters on Total Vibrio vulnificus and Total and Pathogenic (tdh+/trh+) Vibrio parahaemolyticus Levels.

    Science.gov (United States)

    Kinsey, Thomas P; Lydon, Keri A; Bowers, John C; Jones, Jessica L

    2015-08-01

    Vibrio vulnificus (Vv) and Vibrio parahaemolyticus (Vp) are the two leading causes of bacterial illnesses associated with raw shellfish consumption. Levels of these pathogens in oysters can increase during routine antifouling aquaculture practices involving dry storage in ambient air conditions. After storage, common practice is to resubmerge these stored oysters to reduce elevated Vv and Vp levels, but evidence proving the effectiveness of this practice is lacking. This study examined the changes in Vv and in total and pathogenic (thermostable direct hemolysin gene and the tdh-related hemolysin gene, tdh+ and trh+) Vp levels in oysters after 5 or 24 h of dry storage (28 to 32°C), followed by resubmersion (27 to 32°C) for 14 days. For each trial, replicate oyster samples were collected at initial harvest, after dry storage, after 7 days, and after 14 days of resubmersion. Oysters not subjected to dry storage were collected and analyzed to determine natural undisturbed vibrio levels (background control). Vibrio levels were measured using a most-probable-number enrichment followed by real-time PCR. After storage, vibrio levels (excluding tdh+ and trh+ Vp during 5-h storage) increased significantly (P 0.1) from levels in background oysters after 14 days of resubmersion, regardless of dry storage time. These data demonstrate that oyster resubmersion after dry storage at elevated ambient temperatures allows vibrio levels to return to those of background control samples. These results can be used to help minimize the risk of Vv and Vp illnesses and to inform the oyster industry on the effectiveness of routine storing and resubmerging of aquaculture oysters.

  2. Modified atmosphere packaging and vacuum packaging for long period chilled storage of dry-cured Iberian ham.

    Science.gov (United States)

    Parra, V; Viguera, J; Sánchez, J; Peinado, J; Espárrago, F; Gutierrez, J I; Andrés, A I

    2010-04-01

    Dry-cured Iberian ham slices were stored under vacuum and under four different modified atmospheres (60/40=60%N(2)+40%CO(2); 70/30=70%N(2)+30%CO(2); 80/20=80%N(2)+20%CO(2); argon=70%argon+30%CO(2)) at 4+/-1 degrees C during 120 days. Gas composition, moisture content, pH, colour, pigment content, and lipid stability were measured, as well as sensory and microbial analysis were carried out throughout storage. A loss of intensity of red colour (a(*)-values) was observed during storage in ham slices (P0.05). Slices of ham packed in 40%CO(2) (60/40) and 30%CO(2) (70/30) showed lower a(*)-values than the rest of the batches after 60 days (P0.05). TBARs values showed an upward trend during the storage of packaged slices (P0.05) throughout storage under refrigeration and packed either in vacuum or in modified atmospheres. No safety problems were detected in relation to the microbial quality in any case.

  3. High pressure processing for dark-firm-dry beef: effect on physical properties and oxidative deterioration during refrigerated storage

    Science.gov (United States)

    Utama, Dicky Tri; Lee, Seung Gyu; Baek, Ki Ho; Chung, Woon Si; Chung, In Ae; Jeon, Jung Tae; Lee, Sung Ki

    2017-01-01

    Objective Study on the application of high pressure processing (HPP) for dark-firm-dry (DFD) beef was conducted to observe whether HPP has any impact on physical properties and to evaluate oxidative deterioration during refrigerated storage under vacuum. Methods The longissimus lumborum muscles obtained from Friesian Holstein steers (33±0.5 months old) with 24-h postmortem pH higher than 6.0 were vacuum-packed and subjected to pressurization at 200, 400, and 600 MPa for 180 s at 15°C±2°C; the samples were then stored for 9 days at 4°C±1°C and compared with control (0.1 MPa). Results HPP increased meat pH by 0.1 to 0.2 units and the tenderness of cooked DFD beef significantly with no significant effects on meat texture profile. The stability of meat pH was well maintained during refrigerated storage under vacuum. No clear effects were found on the activity of catalase and superoxide dismutase, however, glutathione peroxidase activity was significantly reduced by high pressure. HPP and storage time resulted in aroma changes and the increasing amount of malondialdehyde and metmyoglobin relative composition. Conclusion Although the increasing amount of malondialdehyde content, metmyoglobin formation and aroma changes in HPP-treated samples could not be avoided, HPP at 200 MPa increased L* and a* values with less discoloration and oxidative deterioration during storage. PMID:27383811

  4. Storage stability of a commercial hen egg yolk powder in dry and intermediate-moisture food matrices.

    Science.gov (United States)

    Rao, Qinchun; Fisher, Mary Catherine; Guo, Mufan; Labuza, Theodore P

    2013-09-11

    Quality loss in intermediate-moisture foods (IMF) such as high-protein nutrition bars (HPNB) in the form of hardening, nonenzymatic browning, and free amino group loss is a general concern for the manufacturers. To measure the extent of quality loss over time in terms of these negative attributes, through changing the ratio by weight between two commercial spray-dried hen egg powders, egg white (DEW) and egg yolk (DEY), the storage stability of 10 IMF systems (water activity (aw) ∼ 0.6) containing 5% glycerol, 10% shortening, 35% protein, and 50% sweetener (either maltitol or 50% high-fructose corn syrup/50% corn syrup (HFCS/CS)) were studied. Additionally, the storage stability of the DEY powder itself was investigated. Overall, during storage at different temperatures (23, 35, and 45 °C), the storage stability of DEY in dry and IMF matrices was mainly controlled by the coaction of three chemical reactions (disulfide bond interaction, Maillard reaction, and lipid oxidation). The results showed that by replacing 25% of DEW in an IMF model system with DEY, the rate of bar hardening was significantly lower than that of the models with only DEW at all temperatures due to the softening effect of the fat in DEY. Furthermore, the use of maltitol instead of HFCS/CS in all bar systems not only resulted in decreased hardness but also drastically decreased the change in the total color difference (ΔE*). Interestingly, there was no significant loss of free amino groups in the maltitol systems at any DEW/DEY ratio.

  5. The influence of dry matter, applied heat treatment and storage period on the viscosity of stirred yogurt

    Directory of Open Access Journals (Sweden)

    Denin-Đurđević Jelena D.

    2002-01-01

    Full Text Available Skim milk powder reconstituted to 8.44% TS, 9.65% TS and 10.84% TS respectively was used for investigation. Untreated milk and milk heat treated at 85ºC/20 min and 90ºC/10 min, respectively, were used for the investigation. Milk was inoculated with 2.5% of yogurt culture (containing Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus in the ratio 1:1 at 43ºC. Samples were incubated until pH 4.6 was reached. Samples were immediately cooled to 4ºC and held at that temperature during 14 days. Acid casein gel was stirred after 1, 7 and 14 days of storage. Measurements were done at 30 rpm during 2 min, at 20ºC. According to the investigation, it could be concluded that both applied heat treatment and dry matter content influence viscosity of stirred yogurt. Viscosity increases when dry matter content increases. The smallest viscosity had yogurt produced from untreated milk with 8.44% TS, while samples produced from milk with 10.84% TS had the highest viscosity. Applied heat treatments had significant influence on viscosity of yogurt gained by stirring of acid casein gels after 7 and 14 days of storage. Stirred yogurt produced from milk heat treated at 90ºC/10 min had a higher viscosity than samples produced from milk heat treated at 85ºC/20 min. Storage period influenced average viscosity of stirred yogurt. Samples of stirred yogurt produced from milk with 8.44% TS showed a decrease of average viscosity during storage regardless of the applied heat treatment of milk. The highest average viscosity had samples produced from milk with 10.84% TS.

  6. Impact of different cryoprotectants on the survival of freeze-dried Lactobacillus rhamnosus and Lactobacillus casei/paracasei during long-term storage.

    Science.gov (United States)

    Jofré, A; Aymerich, T; Garriga, M

    2015-01-01

    The production of long shelf-life highly concentrated dried probiotic/starter cultures is of paramount importance for the food industry. The aim of the present study was to evaluate the protective effect of glucose, lactose, trehalose, and skim milk applied alone or combined upon the survival of potentially probiotic Lactobacillus rhamnosus CTC1679, Lactobacillus casei/paracasei CTC1677 and L. casei/paracasei CTC1678 during freeze-drying and after 39 weeks of storage at 4 and 22 °C. Immediately after freeze-drying, the percentage of survivors was very high (≥ 94%) and only slight differences were observed among strains and cryoprotectants. In contrast, during storage, survival in the dried state depended on the cryoprotectant, temperature and strain. For all the protectants assayed, the stability of the cultures was remarkably higher when stored under refrigeration (4 °C). Under these conditions, skim milk alone or supplemented with trehalose or lactose showed the best performance (reductions ≤ 0.9 log units after 39 weeks of storage). The lowest survival was observed during non-refrigerated storage and with glucose and glucose plus milk; no viable cells left at the end of the storage period. Thus, freeze-drying in the presence of appropriate cryoprotectants allows the production of long shelf-life highly concentrated dried cultures ready for incorporation in high numbers into food products as starter/potential probiotic cultures.

  7. A Structural Analytic Evaluation of a Connote Pad In a Spent Fuel Dry Storage Cask

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Hak; Seo, Ki Seog; Lee, Ju Chan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Yeon Do; Cho, Chun Hyung; Lee, Dae Ki [Nuclear Environment Technology Institute, Daejeon (Korea, Republic of)

    2006-06-15

    A spent fuel storage cask is required to prove the safety of a canister under a hypothetical accidental drop condition. A hypothetical accidental drop condition means that a canister is assumed to be a lee drop on to a pad of the storage cask during loading it into a storage cask. A pad of the storage cask absorbs shock to maintain the structural integrities of a canister under a hypothetical accidental drop condition. In this paper a finite element analysis for various pad structures was carried out to improve the structural integrity of a canister under a hypothetical accidental drop condition. A pad of a storage cask was designed a steel structure with concrete. The 1/4 height of a pad was modified with a structure composed of a steel and a polyurethane foam as a impact limiter. The effect of a shape of a steel structure was studied. The effects of the thickness of a steel structure and the density of a polyurethane foam was also studied.

  8. Effect of sulphur forms on colour and residue of sulphur during the storage at drying grapes by sulphur

    Directory of Open Access Journals (Sweden)

    Boztepe Özlem

    2016-01-01

    Full Text Available Turkey is the world leader in the manufacture and export of seedless raisins. Requirement of golden bleached raisins is increasing in food Industry of especially cake, bread and pastry year by year. In this research, the lowest residual value and the practical realization of such production was intended to determine by drying grapes with application of sulphur. In this case, sulphur residue and colour situations were determined during 12-mounth-storage according to sulphur forms. In this study sulphur studies were applied by Vitis Vinifera cv. “Sultani Çekirdeksiz” with Na2S2O5, which is liquid source of sulphur and SO2, which is gas source of sulphur. SO2 application were studied during 3, 6 and 8 hours and liquid form of sulphur is Na2S2O5 that was used during by 10, 20 and 30 minutes. Applications were prepared with 3 replicates which contain 20 kg fresh grape in each replicate. In conclusion, changes in dried grape have been identified in point of colour (chroma and hue and the sulphur content was determined according to sulphur forms in packing. Gas form of sulphur (SO2 which was applied 3 hours, gave the best result during 12-mounth-storage for colour and sulphur residue.

  9. Body heat storage during intermittent work in hot–dry and warm–wet environments

    National Research Council Canada - National Science Library

    Stapleton, Jill M; Wright, Heather E; Hardcastle, Stephen G; Kenny, Glen P

    2012-01-01

    We examined heat balance using an American Conference of Governmental Industrial Hygienists threshold limit value allocated exercise protocol in hot–dry (HD; 46 °C, 10% relative humidity (RH)) and warm–wet (WW; 33 °C, 60% RH...

  10. Carbohydrate storage and light requirements of tropical moist and dry forest tree species

    NARCIS (Netherlands)

    Poorter, L.; Kitajima, K.

    2007-01-01

    In many plant communities, there is a negative interspecific correlation between relative growth rates and survival of juveniles. This negative correlation is most likely caused by a trade-off between carbon allocation to growth vs. allocation to defense and storage. Nonstructural carbohydrates (NSC

  11. Standard guide for evaluation of materials used in extended service of interim spent nuclear fuel dry storage systems

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 Part of the total inventory of commercial spent nuclear fuel (SNF) is stored in dry cask storage systems (DCSS) under licenses granted by the U.S. Nuclear Regulatory Commission (NRC). The purpose of this guide is to provide information to assist in supporting the renewal of these licenses, safely and without removal of the SNF from its licensed confinement, for periods beyond those governed by the term of the original license. This guide provides information on materials behavior under conditions that may be important to safety evaluations for the extended service of the renewal period. This guide is written for DCSS containing light water reactor (LWR) fuel that is clad in zirconium alloy material and stored in accordance with the Code of Federal Regulations (CFR), at an independent spent-fuel storage installation (ISFSI). The components of an ISFSI, addressed in this document, include the commercial SNF, canister, cask, and all parts of the storage installation including the ISFSI pad. The language of t...

  12. Genetic analysis and association of simple sequence repeat markers with storage root yield, dry matter, starch and β-carotene content in sweetpotato.

    Science.gov (United States)

    Yada, Benard; Brown-Guedira, Gina; Alajo, Agnes; Ssemakula, Gorrettie N; Owusu-Mensah, Eric; Carey, Edward E; Mwanga, Robert O M; Yencho, G Craig

    2017-03-01

    Molecular markers are needed for enhancing the development of elite sweetpotato (Ipomoea batatas (L.) Lam) cultivars with a wide range of commercially important traits in sub-Saharan Africa. This study was conducted to estimate the heritability and determine trait correlations of storage root yield, dry matter, starch and β-carotene content in a cross between 'New Kawogo' × 'Beauregard'. The study was also conducted to identify simple sequence repeat (SSR) markers associated with these traits. A total of 287 progeny and the parents were evaluated for two seasons at three sites in Uganda and genotyped with 250 SSR markers. Broad sense heritability (H(2)) for storage root yield, dry matter, starch and β-carotene content were 0.24, 0.68, 0.70 and 0.90, respectively. Storage root β-carotene content was negatively correlated with dry matter (r = -0.59, P content, while storage root yield was positively correlated with dry matter (r = 0.57, P = 0.029) and starch (r = 0.41, P = 0.008) content. Through logistic regression, a total of 12, 4, 6 and 8 SSR markers were associated with storage root yield, dry matter, starch and β-carotene content, respectively. The SSR markers used in this study may be useful for quantitative trait loci analysis and selection for these traits in future.

  13. Secagem e armazenamento de sementes de juçara Drying and storage of euterpe edulis seeds

    Directory of Open Access Journals (Sweden)

    Cibele Chalita Martins

    2009-08-01

    Full Text Available Com o objetivo de verificar o efeito da secagem parcial e do armazenamento sobre a germinação e vigor de sementes de Euterpe edulis obtidas em três épocas de produção, o lote 1 foi colhido em 10 plantasmatriz (PM, em 02/99; o lote 2 em 15 PM, em 04/00; e o lote 3 em 11 PM, em 08/00. Os frutos foram despolpados e as sementes, colocadas para secar por zero, 20 e 40 h (três sublotes, em câmara seca (temperatura de 27 ºC e umidade relativa de 35%. Os três sublotes foram armazenados a 10 ºC, em sacos plásticos (20 mm de espessura fechados. Durante o armazenamento, a qualidade das sementes foi avaliada a cada seis semanas, por 30 semanas, por meio das seguintes determinações: teor de água (105±3 ºC/24 h, porcentagem de germinação e vigor (primeira contagem e índice de velocidade de germinação. O aumento do tempo de secagem resultou em sementes com teor de água decrescente, em torno de 14 a 21% dos valores iniciais, que se mantiveram praticamente inalterados durante o armazenamento. A germinação e vigor das sementes foram prejudicados pela secagem parcial e pelo aumento do tempo de armazenamento, de forma diferenciada entre as épocas de produção, e ambas as características dependem das condições climáticas vigentes durante o desenvolvimento e maturação das sementes.The objective of this research was to verify the effects of partial drying and storage duration on the germination and vigor of three E. edulis seed lots developed under different weather conditions. Mature fruits were harvested in the palm collection from the Instituto Agronômico, located in Ubatuba, SP., forming three seed lots. Seeds from ten plants were harvested on 02/99 and constituted the Seed lot 1; seed lot 2 was composed of seeds of fifteen plants collected in 04/00, whereas seeds from eleven plants harvested on 08/00 composed seed lot 3. The fruits were depulped and the seeds were dried for 0, 20 and 40 hours, using a drying chamber regulated at

  14. Evaluation of Dried Storage of Platelets and RBC for Transfusion: Lyophilization and Other Dehydration Techniques

    Science.gov (United States)

    1991-01-31

    storage as a transfusion resource for combat casualty care. The work is being carried out at three collaborating medical centers: in Greenville, NC...optimization of stabilization procedures currently underway will likely verify a patentable preparation protocol. As an interinstitutional agreement is...conditions). These modified para-plts are being evaluated in the collaborating laboratories. Results are not yet consistent, but encouraging. Whether or not

  15. Investigation of impact of storage conditions on Hypericum perforatum L. dried total extract

    Directory of Open Access Journals (Sweden)

    Halil Koyu

    2015-09-01

    Full Text Available Hypericum perforatum L. (Hypericaceae has been widely prescribed for mild to moderate depression following the release of promising results in clinical trials. However, it is known that its constituents may be affected by milieu. The stability complexities of the constituents of H. perforatum have gained interest in recent years. The aim of the present study was to examine the impact of storage conditions on H. perforatum total extract simultaneously under different storage conditions. Temperature, humidity, and light conditions were evaluated. Comparative analyses of methanol extracts were conducted using high performance liquid chromatography-diode array detection for chlorogenic acid, rutin, hyperoside, isoquercitrin, quercitrin, quercetin, amentoflavone, pseudohypericin, hyperforin, and hypericin. Analysis and extraction were performed using a validated method. The fluctuation of the constituents of the plant extract has been demonstrated. Among these components, chlorogenic acid was the most stable. Hyperforin, hypericin, and pseudohypericin were more stable than the flavonoids at −20°C, in the 6th month. As estimated, decay was lowest at −20°C and highest at 40°C–75% relative humidity for the analyzed constituents. Except for hyperforin, light protection decreased the breakdown of components within 4 months. However, at the 6th month, equivalent changes were seen for all constituents. Degradation of the constituents at −20°C indicates the importance of stability tests in analysis studies covering time and storage conditions.

  16. Short communication: The effects of dry matter and length of storage on the composition and nutritive value of alfalfa silage.

    Science.gov (United States)

    Santos, M C; Kung, L

    2016-07-01

    During the ensiling of feeds, various processes result in chemical changes that can affect their ultimate nutritive value at feed out. The primary objective of this study was to evaluate the effect of prolonged ensiling times on potential changes in in vitro digestibility of neutral detergent fiber (NDF-D) of alfalfa ensiled at about 33% [low dry matter (DM), LDM] or 45% (high DM, HDM) whole-plant DM. Alfalfa from the same field (direct chopped or wilted) was chopped with a conventional forage harvester set for a theoretical length of cut of 0.95 cm and ensiled in mini silos for 45, 180, 270, and 360 d. Fresh forages and silages were analyzed for nutrient content, fermentation end-products, and 30-h NDF-D. The pH of the fresh forages ranged from 6.1 to 6.2 and decreased to approximately 4.7 and 4.3 in HDM and LDM silages, respectively. Production of acids and alcohols were less in HDM compared with LDM as expected. Concentrations of soluble protein and NH3-N also increased with time of storage as expected but soluble protein was greater, whereas NH3-N was lower in HDM compared with LDM silage. The effect of length of storage and DM on hemicellulose and NDF concentrations were very small, whereas DM content at harvest tended to slightly increase the concentration of acid detergent fiber in HDM compared with LDM up to 270 d of storage. The NDF-D was greater in fresh forage compared with corresponding silages. However, time of storage between 45 and 360 d had no effect on the NDF-D of alfalfa silage, regardless of DM concentration at ensiling.

  17. Effect of starter culture, spice mix and storage time and temperature on biogenic amine content of dry fermented sausages.

    Science.gov (United States)

    Komprda, T; Smělá, D; Pechová, P; Kalhotka, L; Stencl, J; Klejdus, B

    2004-08-01

    Two types of dry fermented sausage differing in spicing mixture and the diameter (low content of red pepper+diameter 80 mm, H-sausage; high content of red pepper+diameter 55 mm, P-sausage, respectively) were produced in parallel with two different starter cultures (Pediococcus pentosaceus+Staphylococcus carnosus, B-samples and S. carnosus+Staphylococcus xylosus+Lactobacillus farciminis, F-samples, respectively). The sausages were ripened 21 days and subsequently stored 91 days at the room temperature. Concentration of both most abundant amines, putrescine and tyramine (y; mg/kg DM) increased significantly (P<0.01) in HB-sausage during ripening (x; days): y=2.5+18.13x-0.3144x(2) (R(2)=0.99) and y=0.7+8.17x-0.1130x(2) (R(2)=0.99), and also during storage: y=127.3+5.123x (R(2)=0.79) and y=26.0+3.211x (R(2)=0.74), respectively. At the end of ripening, putrescine (247 mg/kg DM) and tyramine (123 mg/kg DM) content in the HB-sausage was higher (P<0.05) than in the PB-sausage (12 and 9 mg/kg DM, respectively), concentration of either of these amines was negligible (1 mg/kg DM) in either type of F-inoculated sausage. Both starter culture and sausage type influenced significantly (P<0.001) both putrescine and tyramine content in the sausage; starter accounted for 57% and 55% of total variability in putrescine and tyramine content, respectively. Due to the significant (P<0.05) increase of total aerobic counts in the HB-sausage between the end of ripening and the 7th day of storage, followed by the significant (P<0.01) increase of the sum of total biogenic amines between the end of ripening (425 mg/kg DM) and the end of storage (1029 mg/kg DM), the storage of the dry fermented sausages at the room temperature should not be recommended.

  18. Physicochemical properties and storage stability of lutein microcapsules prepared with maltodextrins and sucrose by spray drying.

    Science.gov (United States)

    Kuang, Pengqun; Zhang, Hongchao; Bajaj, Poonam R; Yuan, Qipeng; Tang, Juming; Chen, Shulin; Sablani, Shyam S

    2015-02-01

    The purpose of this study was to determine the physicochemical properties of lutein microcapsules. Nine types of lutein microcapsules were prepared in order to determine their encapsulation efficiency and yield. Results show that lutein microcapsules with maltodextrin M040 and sucrose at the weight ratio of 3:1 (designated as M040:1) had the highest encapsulation efficiency (90.1%) among the lutein microcapsules, as well as a higher encapsulation yield (90.4%). The onset glass transition temperatures (Tgi ) and the surface dents of the lutein microcapsules decreased as the dextrose equivalent value of maltodextrin and the weight ratio of sucrose increased. Enthalpy relaxation experiments were conducted for the lutein microcapsules M040:1 at (Tgi - 5) , (Tgi - 10), and (Tgi - 15) °C, and the obtained data were fitted to the Kohlrausch-Williams-Watts model. Results show that the mean relaxation time (τ) (316 h) of M040:1 lutein microcapsules aged at (Tgi - 15) °C was greater than the τ (161 h) at (Tgi - 10) °C and τ (60.5 h) at (Tgi - 5) °C. Effects of temperature and oxygen transmission rates for package film on the storage stability of M040:1 lutein microcapsules were also investigated. Findings show that rates of lutein degradation and color change increased by an order of magnitude as storage temperature (4 to 97 °C) and oxygen transmission rate of the package film (0.018 to 62.8 cc/m(2) day) increased. These results suggest that lutein is highly unstable and susceptible to thermal and oxidative degradations. However, microencapsulation with appropriate wall materials of higher relaxation time and high oxygen barrier packaging can increase the storage life.

  19. The influence of different polymers on viability of Bifidobacterium lactis 300b during encapsulation, freeze-drying and storage.

    Science.gov (United States)

    Pop, Oana Lelia; Brandau, Thorsten; Schwinn, Jens; Vodnar, Dan Cristian; Socaciu, Carmen

    2015-07-01

    Seven different types of natural polymers namely hydroxypropyl methylcellulose (HPMC), sodium-carboxymethyl cellulose (Na-CMC), microcrystalline cellulose (MCC), starch BR-07, starch BR-08, dextrin and pullulan were used in order to develop the optimal formula for the entrapment of Bifidobacterium lactis 300B in Ca-alginate based granules. Laminar flow drip casting with Brace-Encapsulator was used in order to prepare the granules. The results showed that alginate/pullulan and alginate/HPMC formulation provide high protection for the bacterial strain used for encapsulation. These two formulations were further used to obtain freeze dried granules, for which the viability in time and at different temperatures was tested. The final results showed a higher viability than the level of the therapeutic minimum (>10(7) CFU/g) after 15 days of storage. Other parameters like entrapment efficiency, production rate, sphericity, flowability were also discussed.

  20. The use of dried blood spot samples in the diagnosis of lysosomal storage disorders--current status and perspectives.

    Science.gov (United States)

    Reuser, Arnold J; Verheijen, Frans W; Bali, Deeksha; van Diggelen, Otto P; Germain, Dominique P; Hwu, Wuh-Liang; Lukacs, Zoltan; Mühl, Adolf; Olivova, Petra; Piraud, Monique; Wuyts, Birgit; Zhang, Kate; Keutzer, Joan

    2011-01-01

    Dried blood spot (DBS) methods are currently available for identification of a range of lysosomal storage disorders (LSDs). These disorders are generally characterized by a deficiency of activity of a lysosomal enzyme and by a broad spectrum of phenotypes. Diagnosis of LSD patients is often delayed, which is of particular concern as therapeutic outcomes (e.g. enzyme replacement therapy) are generally more favorable in early disease stages. Experts in the field of LSDs diagnostics and screening programs convened and reviewed experiences with the use of DBS methods, and discuss the diagnostic challenges, possible applications and quality programs in this paper. Given the easy sampling and shipping and stability of samples, DBS has evident advantages over other laboratory methods and can be particularly helpful in the early identification of affected LSD patients through neonatal screening, high-risk population screening or family screening.

  1. Flavor retention of peppermint (Mentha piperita L.) essential oil spray-dried in modified starches during encapsulation and storage

    DEFF Research Database (Denmark)

    Baranauskiene, R.; Bylaite, Egle; Zukauskaite, J.

    2007-01-01

    The effect of different commercial modified food starch carrier materials on the flavor retention of the essential oil (EO) of peppermint (Mentha piperita L.) during spray drying and storage was evaluated. The obtained results revealed that the emulsification and encapsulation efficiencies...... of peppermint EO were higher for all n-octenyl succinic anhydride (OSAN)-modified starches as compared to those of hydrolyzed starches (dextrins). The compositions of pure, emulsified, and encapsulated peppermint EOs in different matrices were quite similar; however, some changes in the percentages of some...... individual compounds were observed. Larger differences in the compositions of surface oils from various encapsulation products were obtained. Flavor components were released at different rates by each of the encapsulated products. The aroma binding capacity of different modified starch matrices to lock EO...

  2. Effects of shifting seasonal rainfall patterns on net primary productivity and carbon storage in tropical seasonally dry ecosystems

    Science.gov (United States)

    Rohr, T.; Manzoni, S.; Feng, X.; Menezes, R.; Porporato, A. M.

    2013-12-01

    Although seasonally dry ecosystems (SDEs), identified by prolonged drought followed by a short, but intense, rainy season, cover large regions of the tropics, their biogeochemical response to seasonal rainfall and soil carbon (C) sequestration potential are not well characterized. Both productivity and soil respiration are positively affected by seasonal soil moisture availability, creating a delicate balance between C deposition through litterfall and C losses through heterotrophic respiration. As climate change projections for the tropics predict decreased annual rainfall and increased dry season length, it is critical to understand how variations in seasonal rainfall distributions control this balance. To address this question, we develop a minimal model linking the seasonal behavior of the ensemble soil moisture, plant productivity, the related soil C inputs through litterfall, and soil C dynamics. The model is parameterized for a case study from a drought-deciduous caatinga ecosystem in northeastern Brazil. Results indicate that when altering the seasonal rainfall patterns for a fixed annual rainfall, both plant productivity and soil C sequestration potential are largely, and nonlinearly, dependent on wet season duration. Moreover, total annual rainfall plays a dominant role in describing this relationship, leading at times to the emergence of distinct optima in both primary production and C sequestration. Examining these results in the context of climate-driven changes to wet season duration and mean annual precipitation indicate that the initial hydroclimatic regime of a particular ecosystem is an important factor to predict both the magnitude and direction of the effects of shifting seasonal distributions on productivity and C storage. Although highly productive ecosystems will likely experience declining C storage with predicted climate shifts, those currently operating well below peak production can potentially see improved C stocks with the onset of

  3. A Well Established System For The Dry Storage Of Spent Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Skrzyppek, Juergen; Kim, Josef Du-III [SMART Power Company, Essen (Germany)

    2015-05-15

    The German company GNS Gesellschaft fur Nuklear-Service mbH today looks back on more than 30 years of operational experience with dual-purpose casks. Following customer demands, GNS developed two different cask types for SNF the CASTOR and the CONSTOR cask type. While the CASTOR type is optimized for high thermal loads which allows loading after extremely short cooling times and/or high burn-up of the SNF the CONSTOR type is cost optimized for the cost-efficient storage of large quantities of cooler SNF. By now almost 1,300 GNS-casks are in operation worldwide. In Germany alone, more than 1000 CASTOR casks are stored with individual storage periods of up to 30 years. Taking into account the additional casks that have to be manufactured, loaded and stored during the final years of the German Nuclear Phase-Out, there will be 2000 casks by GNS in operation worldwide. The presentation will give an overview over several national and international projects and show the bandwidth of customized solutions by GNS.

  4. Long term storage of dry versus frozen RNA for next generation molecular studies.

    Directory of Open Access Journals (Sweden)

    Eric Seelenfreund

    Full Text Available The standard method for the storage and preservation of RNA has been at ultra-low temperatures. However, reliance on liquid nitrogen and freezers for storage of RNA has multiple downsides. Recently new techniques have been developed for storing RNA at room temperature utilizing desiccation and are reported to be an effective alternative for preserving RNA integrity. In this study we compared frozen RNA samples stored for up to one year to those which had been desiccated using RNAstable (Biomatrica, Inc., San Diego, CA and stored at room temperature. RNA samples were placed in aliquots and stored after desiccation or frozen (at -80°C, and were analyzed for RNA Integrity Number (RIN, and by qPCR, and RNA sequencing. Our study shows that RNAstable is able to preserve desiccated RNA samples at room temperature for up to one year, and that RNA preserved by desiccation is comparable to cryopreserved RNA for downstream analyses including real-time-PCR and RNA sequencing.

  5. Effects of extended dry storage of powdered infant milk formula on susceptibility of Enterobacter sakazakii to hot water and ionizing radiation.

    Science.gov (United States)

    Osaili, Tareq M; Al-Nabulsi, Anas A; Shaker, Reyad R; Ayyash, Mutamed M; Olaimat, Amin N; Al-Hasan, Ashraf S Abu; Kadora, Khaled M; Holley, Richard A

    2008-05-01

    Infant milk formula has been identified as a potential source of Enterobacter sakazakii, which has been implicated in neonatal meningitis and necrotizing enterocolitis. This study was undertaken to determine whether the length of E. sakazakii storage in powdered infant milk formula (PIMF) affected the ability of the pathogen to survive subsequent reconstitution of the powder with hot water or treatment with gamma radiation. Five E. sakazakii strains were mixed individually with PIMF and kept for up to 12 months at 25 degrees C. After storage PIMF was reconstituted with water at 60 to 100 degrees C or was exposed to radiation. Without any treatment secondary to drying, E. sakazakii counts decreased Dry storage decreased thermal resistance but increased resistance of E. sakazakii to ionizing radiation in PIMF. Reconstitution of contaminated powder with water at 70 degrees C after 1 month of dry storage reduced E. sakazakii viability slightly, > 2 log/g, and after powder was stored for 12 months all E. sakazakii strains were eliminated. In contrast, desiccation substantially increased the resistance of E. sakazakii strains to ionizing radiation. Although the D-value for E. sakazakii IMF1 following overnight storage in PIMF was 0.98 kGy, > 4 kGy was required to kill 1.5 log/g of the same strain that had survived 12 months in dry PIMF. Results suggested that low-dose irradiation will more effectively eliminate E. sakazakii from PIMF if the treatment is applied shortly after PIMF manufacture.

  6. Quality of osmotically pre-treated and vacuum dried pineapple cubes on storage as influenced by type of solutes and packaging materials

    OpenAIRE

    Paul, Prodyut Kumar; Ghosh, Swapan Kumar; Singh, Dhananjay Kumar; Bhowmick, Nilesh

    2012-01-01

    The quality and stability of osmotically pre-treated and subsequently vacuum dried pineapple cubes using three different solutes and packed in three different types of packaging materials on storage was evaluated. The experiment was laid out in completely randomized block design with two factors and three replications for each treatment. Treatment combinations were considered as one factor and storage interval as another factor. Pineapple cubes stored in glass bottle showed very little percen...

  7. Drying and storage of Eugenia involucrata DC. seeds Secagem e armazenamento de sementes de Eugenia involucrata DC.

    Directory of Open Access Journals (Sweden)

    Angela Maria Maluf

    2003-01-01

    Full Text Available The physiological quality of seeds of native species is important to produce healthy saplings and therefore guarantee the success of programs to recover disturbed vegetation. This reinforces the necessity for investigating the physiological quality of those seeds. To evaluate the effects of different drying rates on the germination, moisture content and storability of Eugenia involucrata diaspores, mature fruits collected at Mogi Guaçu, SP, Brazil had their epi- and mesocarps removed by washing and were dried at 30, 40 or 50ºC until their water content was reduced from 57% (fresh diaspores to 13% (final drying, totaling six drying levels. In a second experiment, diaspores had their moisture content reduced from 57% to 49%, at 30ºC, totaling six drying levels (0h, 1h, 2h, 3h, 4h and 5h, and were kept for 180 days in plastic bags under cold storage. The drying rate had no effect on tolerance to desiccation by E. involucrata diaspores; water contents lower than 51% decreased both germinability and storability. Diaspores can be stored for up to 180 days as long as their water content is reduced to 53% and they are kept inside plastic bags under cold storage.O uso de sementes de espécies nativas de alta qualidade é fundamental nos programas de recomposição vegetal, o que fortalece a necessidade de se investigar o potencial fisiológico das mesmas. Esta pesquisa objetivou avaliar os efeitos da velocidade de secagem dos diásporos de Eugenia involucrata sobre a sua germinação e vigor, bem como as relações entre teor de água e capacidade de armazenamento. Foram colhidos frutos maduros em pomar instalado em Mogi Guaçu, SP (22º15-16'S, 47º8-12'W, que tiveram seu epicarpo e mesocarpo removidos por lavagem. A seguir, os diásporos (semente + endocarpo foram submetidos a secagem controlada a 30, 40 e 50ºC, com reduções progressivas do teor de água inicial de 57% para até 13%, obtendo-se seis níveis de secagem em cada temperatura. Em um

  8. The Effects of Grape Seed Flour on the Quality of Turkish Dry Fermented Sausage (Sucuk) during Ripening and Refrigerated Storage

    Science.gov (United States)

    2016-01-01

    In this study, the effects of grape seed flour on the physical-chemical properties, microbiological and sensory properties of Turkish dry fermented sausage, sucuk, was investigated. After the sausages produced with beef, beef fat, sheep tail fat and spices, they were ripened for 14 d. Then they were vacuum-packaged and stored for 80 d at 4℃. The effects of grape seed flour (GSF; 0%, 0.75%, 1.5%, 3%) on the physical-chemical properties (pH, moisture, fat, protein, free fatty acids, thiobarbituric acids, diameter reduction, ripening yield, instrumental colour), microbiological properties (total aerobic mesophilic and lactic acid bacteria, Enterobacteriaceae, mould and yeast) and sensory properties of the sausages were investigated. Grape seed flour decreased moisture, TBA, diameter reduction, instrumental colour (a, b) values and sensory analysis scores during the ripening period; it also decreased TBA, instrumental colour (L, a, b) values, total aerobic mesophilic and lactic acid bacteria counts during the storage period. It was concluded that grape seed flour has a potential application as an additive in dry fermented sausages. PMID:27433100

  9. The Effects of Grape Seed Flour on the Quality of Turkish Dry Fermented Sausage (Sucuk) during Ripening and Refrigerated Storage.

    Science.gov (United States)

    Kurt, Şükrü

    2016-01-01

    In this study, the effects of grape seed flour on the physical-chemical properties, microbiological and sensory properties of Turkish dry fermented sausage, sucuk, was investigated. After the sausages produced with beef, beef fat, sheep tail fat and spices, they were ripened for 14 d. Then they were vacuum-packaged and stored for 80 d at 4℃. The effects of grape seed flour (GSF; 0%, 0.75%, 1.5%, 3%) on the physical-chemical properties (pH, moisture, fat, protein, free fatty acids, thiobarbituric acids, diameter reduction, ripening yield, instrumental colour), microbiological properties (total aerobic mesophilic and lactic acid bacteria, Enterobacteriaceae, mould and yeast) and sensory properties of the sausages were investigated. Grape seed flour decreased moisture, TBA, diameter reduction, instrumental colour (a, b) values and sensory analysis scores during the ripening period; it also decreased TBA, instrumental colour (L, a, b) values, total aerobic mesophilic and lactic acid bacteria counts during the storage period. It was concluded that grape seed flour has a potential application as an additive in dry fermented sausages.

  10. Influence of packaging and storage conditions on quality parameters and shelf life of solar-dried banana

    Directory of Open Access Journals (Sweden)

    Nina Phothapaeree

    2017-04-01

    Full Text Available Effects of packaging materials (metalized or polylactic acid, PLA, based pouches, storage temperatures (30-50°C and time (up to 6 months on quality of solar-dried banana were investigated. At 30°C in both packaging materials, change in moisture content, water activity (a w and hardness were minimal while darkening of the surface color progressed. No microbial spoilage was found. Hedonic scores of color, flavor, taste, texture and overall acceptance of the 6th month aged samples were lowest (p≤0.05. Based on the sensory test, product packed in both packaging materials had shelf life of 5 months at 30°C. Higher storage temperature greatly induced time-dependent decrease in moisture content and a w with an increase in hardness, especially for the samples in PLA-based pouches. Fractional conversion model was used to predicted time-dependent change in total color difference (ΔE (R2 ≥ 0.84. Temperature dependence of the rate constant followed Arrhenius-type relationship (R2 ≥ 0.99.

  11. Application of nonlinear ultrasonics to inspection of stainless steel for dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Timothy James II [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Anderson, Brain E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Remillieux, Marcel C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Le Bas, Pierre -Yves [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pieczonka, Lukasz [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-09-22

    This report summarized technical work conducted by LANL staff an international collaborators in support of the UFD Storage Experimentation effort. The focus of the current technical work is on the detection and imaging of a failure mechanism known as stress corrosion cracking (SCC) in stainless steel using the nonlinear ultrasonic technique known as TREND. One of the difficulties faced in previous work is in finding samples that contain realistically sized SCC. This year such samples were obtained from EPRI. Reported here are measurements made on these samples. One of the key findings is the ability to detect subsurface changes to the direction in which a crack is penetrating into the sample. This result follows from last year's report that demonstrated the ability of TREND techniques to image features below the sample surface. A new collaboration was established with AGH University of Science and Technology, Krakow, Poland.

  12. Influence of small amorphous amounts in hydrophilic and hydrophobic APIs on storage stability of dry powder inhalation products.

    Science.gov (United States)

    Müller, Thorsten; Krehl, Regina; Schiewe, Jörg; Weiler, Claudius; Steckel, Hartwig

    2015-05-01

    The effects of different manufacturing methods to induce formation of amorphous content, changes of physico-chemical characteristics of powder blends and changes of aerodynamic properties over storage time (6months) analyzed with the Next Generation Impactor (NGI) are investigated. Earlier studies have shown that standard pharmaceutical operations lead to structural disorders which may influence drug delivery and product stability. In this investigation, fully amorphous drug samples produced by spray-drying (SD) and ball-milling (BM) as well as semi-crystalline samples (produced by blending and micronization) are studied and compared to fully crystalline starting material. The amorphous content of these hydrophilic and hydrophobic active pharmaceutical ingredients (APIs) was determined using a validated one-step DVS-method. For the conducted blending and micronization tests, amorphous amounts up to a maximum of 5.1% for salbutamol sulfate (SBS) and 17.0% for ciclesonide (CS) were measured. In order to investigate the impact of small amorphous amounts, inhalable homogenous powder mixtures with very high and low amorphous content and a defined particle size were prepared with a Turbula blender for each API. These blends were stored (6months, 45% RH, room temperature) to evaluate the influence of amorphous amounts on storage stability. The fine particle fraction (FPF: % of emitted dosehydrophobic CS a constantly increasing FPF (from 6% to >15%) over storage time for both types of blends was determined. Therefore, prolonged stability of amorphous parts and an incalculable behavior for CS blends are supposed, in contrast, SBS showed a controllable FPF after conditioning.

  13. Seismic Structure-Soil-Structure Interaction Analysis of a Consolidated Dry Storage Module for CANDU Spent Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Young Gon; Yoon, Jeong Hyoun; Kim, Sung Hwan; Yang, Ke Hyung; Lee, Heung Young; Cho, Chun Hyung [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of); Choi, Kyu Sup; Jeong, In Su [KONES Corporation, Seoul (Korea, Republic of)

    2005-07-01

    The MACSTOR/KN-400 module has been developed as an effective alternative to the existing stand alone concrete canister for dry storage of CANDU spent fuel. The structure is a concrete monolith of 21.67 m long and 12.66 m wide and has a height equal to 7.518 m including the bottom slab. Inside the concrete module consists of 40 storage cylinders accommodating ten 60-bundle dry storage baskets, which are suspended from the top slab and eventually restrained at 10 cm above the bottom slab with horizontal seismic restraints. The main cooling process of the MACSTOR/KN-400 module shall be by air convection through air inlets and outlets. The civil design parameters, with respect to meteorological and seismic loads applied to the module are identical to those specified for the Wolsung CANDU 3 and 4 plants, except for local site characteristics required for soilstructure interaction (SSI) analysis. It is required for the structural integrity to fulfill the licensing requirements. As per USNRC SRP Section 3.7.2, it shall be reviewed how to consider the phenomenon of coupling of the dynamic response of adjacent structures through the soil, which is referred to as structure-soil-structure interaction (SSSI). The presence of closely spaced multiple structural foundations creates coupling between the foundations of individual structures . Some observations of the actual seismic response of structures have indicated that SSSI effects do exist, but they are generally secondary for the overall structural response motions. SSSI effects, however, may be important for a relatively small structure which is to be close to a relatively large structure, while they may be generally neglected for overall structural response of a large massive structure, such as nuclear power plant. As such the scope of the present paper is to carry out a seismic SSSI analysis in case of the MACSTOR/KN- 400 module, in order to investigate whether or not SSSI effect shall be included in the overall seismic

  14. Secado y almacenamiento de semillas de mandarino 'Cleopatra' Drying and storage of 'Cleopatra' mandarin seeds

    Directory of Open Access Journals (Sweden)

    Angel Villegas-Monter

    2005-01-01

    Full Text Available Los objetivos del trabajo fueron evaluar el efecto del tratamiento con productos químicos y contenido de humedad en la conservación de semillas de mandarino 'Cleopatra' (Citrus reshni Hort ex Tan. Semillas con 14,7% de humedad tratadas con cuatro funguicidas y 8-hidroxiquinoleina, fueron almacenadas a 4±2°C durante un año, al igual que tres lotes de semillas con 5,0%, 14,7% y 26,8% de humedad, tratadas con y sin 8-hidroxiquinoleina. Se evaluó la germinación y emergencia al inicio del experimento, a los seis y 12 meses de almacenamiento. En la prueba con productos químicos, el almacenamiento de semillas con 14,7% de humedad sólo fue viable hasta los seis meses, con mayores porcentajes de germinación y emergencia (59,3% y 54,0%, respectivamente, mientras que, en las semillas sin tratamiento químico fue de 33,3% y 27,3%, respectivamente. En relación con el contenido de humedad de las semillas, a los seis meses de almacenamiento se obtuvo mayor emergencia de plántulas (63,6% y 58,0% en semillas con 26,8% y 5%, mientras que a los 12 meses, las semillas con 5%, de humedad tuvieron 75,6% de emergencia.The objetives of this work were to evaluate the effect of the treatment with chemical products and the humidity content for conservation of seeds of 'Cleopatra' mandarin (Citrus reshni Hort ex Tan. Seeds with 14.7% of moisture content were treated with four fungicides and 8-hydroxyquinoline and stored at 4±2°C for one year. Three groups of seeds with 5.0, 14.7% and 26.8% of moisture content were stored as above. Germination and emergence were evaluated at the beginning of the two experiments, at six and twelve months of storage. In the test with chemical products, storage of seeds with 14.7% of moisture content was possible only for six months, with higher percentages of germination and emergence (59.3% and 54.0%, respectively, while in seeds without chemical treatment percentages of germination and emergence were about 33.3% and 27

  15. Polysaccharide benefits dry storage survival of the biocontrol agent Pseudomonas fluorescens S11:P:12 effective against several maladies of stored potatoes

    Science.gov (United States)

    Pseudomonas fluorescens S11:P:12 (NRRL B-21133) is a biological control agent able to suppress several storage maladies of potatoes including sprouting, Fusarium dry rot incited by Gibberella pulicaris, pink rot incited by Phytophthora erythroseptica, and late blight incited by Phytophthora infestan...

  16. Replantation after extended dry storage of avulsed permanent incisors: report of a case.

    Science.gov (United States)

    Cobankara, Funda Kont; Ungor, Mete

    2007-08-01

    A 15-year-old boy lost his maxillary right and left central incisor teeth in a bicycle accident. He was referred to our clinic 1 week after the injury. The crown-root integrities of both the teeth were not damaged. Although the teeth were stored under dry conditions for 1 week, reimplantation of the teeth was planned to retain the teeth in the mouth for as long a period as possible because of the patient's age. Following the debridement and sterilization of root surfaces in 2.5% NaOCl, root canals were prepared and filled with calcium hydroxide. Then, about 2 mm of the apexes were resected to ensure that the roots easily seated in the alveolar socket and the prepared cavities in root ends were obturated with the amalgam. The teeth were placed into their respective sockets and splinted temporarily. The root canal therapy was completed 5 weeks later. Ankylosis was observed radiographically after 10 months. The patient is now 23 years old and he is still able to use both the central incisors functionally. However, there is a pink appearance on the cervical buccal surface of left central incisor because of progressive replacement resorption. In this case, the new treatment plan is to perform a permanent restoration with dental implants following the extraction of both teeth. Even though the long-term prognosis is uncertain, this treatment technique has provided an advantage for the patient in his adolescent period by maintaining the height of alveolar bone and making the provision of an aesthetically acceptable permanent restoration at a later age possible.

  17. Metal cask RT-5000 for the dry storage and transportation of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Vorobyov, A.I.; Kazeev, V.G.; Krayev, V.S.; Shcherbina, A.N.; Churikov, Y.I. [All-Russian Research Inst. of Technical Physics, Snezhinsk (Russian Federation)

    2003-05-01

    Presentation of new-type cask, developed at RFNC-VNIITF, is in the article. The prototype model of the shipping cask was subjected to tests imitating normal shipment conditions (free fall, pressing, and impact) and to tests imitating emergency situation during shipment (a drop from the 9-m height onto a pin is replaced by acceleration of the shipping cask at a guide rail of the rocket-catapult installation (RCI), a 1-m drop onto a pin, heat tests a 30-minutes fire at the temperature of for 8500 C, submergence to the depth of 15 and 200 meters). After each test the hermeticity preservation is examined. Parallel with the real testing, a mathematical simulation of physical processes induced by the corresponding tests was conducted at the RFNC-VNIITF. The required parameters obtained from the tests are used to calibrate the calculation methods. As a result it has been possible to obtain a good agreement between the results of calculations and experiments; this will allow the mathematic simulation to be used wider. The advantage of the RT-5000 metal cask in comparison with metal-concrete analogs are as follows: SFA are placed into the RT-5000 entirely without cutting into two bunches of fuel elements; the expensive hot doom is not required for automatic cutting the SFA and for loading the bunches of fuel elements into intermediate cases; the possibility remains to transport the RT-5000 without reloading SFA after 50-year storage, although this is a problem for the metal-concrete casks.

  18. Microwave drying for safe storage and improved nutritional quality of green gram seed (Vigna radiata).

    Science.gov (United States)

    Pande, Ranjana; Mishra, H N; Singh, M N

    2012-04-11

    The present study describes the effect of the microwave-heating method on disinfestations and physico characteristics, viz., grain size, grain hardness, and nutritional quality, of the stored green gram seed. It has been observed that the use of the microwave-heating method not only prolongs the storage duration of the green gram seed but also enhances its nutritional quality. The effect of independent parameters, viz., microwave power level and time of exposure, on the moisture content, insect mortality, color, and antinutrient factor (phyic acid) was optimized using response surface methodology (RSM), with the optimized value for power of 808 W and time at 80 s. The optimally treated green gram seed has 8.9% moisture, 99.5% insect mortality, 2.22 Δa* (green color of seed), and 591.79 mg/100 g of antinutrient factor (phytic acid). The grain size (geometric mean diameter, D(m)) of the control (untreated) sample was 3.75 mm, and that of the microwave-treated sample using optimum conditions was 3.99 mm. The grain hardness of the control sample was 3.31 kg, and that of the microwave-treated sample using optimum conditions was 1.305 kg. In vitro protein digestibility (IVPD) of the control (untreated) sample was 83 ± 0.289%, and that of the microwave-treated sample using optimum conditions was 85 ± 0.296%. These values are significantly difference (p microwave treatment resulted in a non-significant (p microwave heating not only increases the insect mortality but also reduces the moisture content and antinutritional factor (phytic acid), while the natural green color of the seed is not affected much. This study provides a novel and environmentally safe technique and increase in the nutritive quality.

  19. Evaluation of maximum allowable temperature inside basket of dry storage module for CANDU spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyung Ho; Yoon, Jeong Hyoun; Chae, Kyoung Myoung; Choi, Byung Il; Lee, Heung Young; Song, Myung Jae [Nuclear Environment Technology Institute, Taejon (Korea, Republic of); Cho, Gyu Seong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2002-10-01

    This study provides a maximum allowable fuel temperature through a preliminary evaluation of the UO{sub 2} weight gain that may occur on a failed (breached sheathing) element of a fuel bundle. Intact bundles would not be affected as the UO{sub 2} would not be in contact with the air for the fuel storage basket. The analysis is made for the MACSTOR/KN-400 to be operated in Wolsong ambient air temperature conditions. The design basis fuel is a 6-year cooled fuel bundle that, on average has reached a burnup of 7,800 MWd/MTU. The fuel bundle considered for analysis is assumed to have a high burnup of 12,000 MWd/MTU and be located in a hot basket. The MACSTOR/KN-400 has the same air circuit as the MACSTOR and the air circuit will require a slightly higher temperature difference to exit the increased heat load. The maximum temperature of a high burnup bundle stored in the new MACSTOR/KN-400 is expected to be about 9 .deg. C higher than the fuel temperature of the MACSTOR at an equivalent constant ambient temperature. This temperature increase will in turn increase the UO{sub 2} weight gain from 0.06% (MACSTOR for Wolsong conditions) to an estimated 0.13% weight gain for the MACSTOR/KN-400. Compared to an acceptable UO{sub 2} weight gain of 0.6%, we are thus expecting to maintain a very acceptable safety factor of 4 to 5 for the new module against unacceptable stresses in the fuel sheathing. For the UO{sub 2} weight gain, the maximum allowable fuel temperature was shown by 164 .deg. C.

  20. Combined thermal storage pond and dry cooling tower waste heat rejection system for solar-thermal steam-electric power plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Guyer, E.C.; Bourne, J.G.; Brownell, D.L.; Rose, R.M.

    1979-02-28

    The thermal performance and economics of the combined thermal storage pond and dry cooling tower waste heat rejection system concept for solar-thermal steam-electric plants have been evaluated. Based on the computer simulation of the operation of southwest-sited solar-thermal plants, it has been determined that the combined pond-tower concept has significant cost and performance advantages over conventional dry cooling systems. Use of a thermal storage pond as a component of the dry cooling system allows a significant reduction in the required dry cooling heat exchange capacity and the associated parasitic power consumption. Importantly, it has been concluded that the combined pond-tower dry cooling system concept can be employed to economically maintain steam condensing temperatures at levels normally achieved with conventional evaporative cooling systems. An evaluation of alternative thermal storage pond design concepts has revealed that a stratified vertical-flow cut-and-fill reservoir with conventional membrane lining and covering would yield the best overall system performance at the least cost.

  1. Triple-Layer Plastic Bags Protect Dry Common Beans (Phaseolus vulgaris) Against Damage by Acanthoscelides obtectus (Coleoptera: Chrysomelidae) During Storage.

    Science.gov (United States)

    Mutungi, C; Affognon, H D; Njoroge, A W; Manono, J; Baributsa, D; Murdock, L L

    2015-10-01

    Fumigated dry common beans (Phaseolus vulgaris L.) that were artificially infested with Acanthoscelides obtectus Say, and others that were not artificially infested, were stored in hermetic triple-layer PICS (Lela Agro, Kano, Nigeria) or woven polypropylene (PP) bags for 6 mo at ambient laboratory temperature conditions of 22.6 ± 1.9°C and 60.1 ± 4.3% relative humidity. In an additional trial, beans contained in PP bags were treated with Actellic Super dust before introducing A. obtectus. Moisture content, number of live adult A. obtectus, seed damage, weight loss, and seed germination were determined at monthly intervals. At 6 mo, beans stored in PICS bags retained higher moisture than those stored in PP bags, but in all treatments the moisture level remained below that recommended for safe storage of beans. In the PICS bags, proliferation of A. obtectus did not proceed and at 6 mo, beans stored in these bags did not have insect-inflicted seed damage or weight loss. In contrast, seed damage and weight loss in PP bags exceeded economic threshold after 1 mo in the absence of Actellic Super dust (Syngenta Crop protection AG, Basle, Switzerland), and after 2 mo in the presence of it. Germination of beans stored in PP bags decreased greatly whereas the beans stored in PICS bags did not show reduced germination. Chemical free storage of common beans in PICS bags protects them against damage by A. obtectus.

  2. Validation of a Multiplex Tandem Mass Spectrometry Method for the Detection of Selected Lysosomal Storage Diseases in Dried Blood Spots

    Directory of Open Access Journals (Sweden)

    Graziela Schmitt Ribas PhD

    2017-02-01

    Full Text Available Background: Interest in screening methods for lysosomal storage diseases (LSDs has increased in recent years, since early diagnosis and treatment are essential to prevent or attenuate the onset of symptoms and the complications of these diseases. In the current work, we evaluated the performance of tandem mass spectrometry (MS/MS for the detection of some LSDs, aiming the future use of this methodology for the screening of these disorders. Methods: Standard curves and quality control dried blood spots were assayed to evaluate the precision, linearity, and accuracy. A total of 150 controls were grouped according to age and subjected to measurement of lysosomal enzymes deficient in Niemann-Pick A/B, Krabbe, Gaucher, Fabry, Pompe, and Mucopolysaccharidosis type I diseases. Samples from 59 affected patients with a diagnosis of LSDs previously confirmed by fluorimetric methods were analyzed. Results: Data from standard calibration demonstrated good linearity and accuracy and the intra- and interassay precisions varied from 1.17% to 11.60% and 5.39% to 31.24%, respectively. Except for galactocerebrosidase and α- l -iduronidase, enzyme activities were significantly higher in newborns compared to children and adult controls. Affected patients presented enzymatic activities significantly lower compared to all control participants. Conclusion: Our results show that MS/MS is a promising methodology, suitable for the screening of LSDs, but accurate diagnoses will depend on its correlation with other biochemical and/or molecular analyses.

  3. Heat transfer analysis of consolidated dry storage system for CANDU spent fuel considering environmental conditions of Wolsong site

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. H.; Yoon, J. H.; Choi, B. I.; Lee, H. Y. [Korea Hydraulic and Nuclear Power Company, Taejon (Korea, Republic of)

    2004-07-01

    The purpose of the present paper is to perform heat transfer analysis of the MACSTOR/KN-400 dry storage system for CANDU spent fuel in order to predict maximum concrete temperatures and temperature gradients. This module has twice the capacity of the existing MACSTOR-200, which is in operation at Gentilly-2. In the thermal design of the MACSTOR/KN-400, Thermal Insulation Panels(TIP) were introduced to reduce concrete temperatures and temperature gradients in the module caused by the high fuel heat loads. Environmental factors such as solar heat, daily temperature variations and ambient temperatures in summer and winter at Wolsong site and the assumed presence of hot baskets were taken into consideration in the simulations. Two cases were performed for the MACSTOR/KN-400: Off-normal cases in summer and winter. The maximum local concrete temperatures were predicted to be 63 .deg. C for the off-normal case. The temperature gradients in the concrete walls and roof are predicted to be 28C and 25C for off-normal operation in summer, incorporating a 3C uncertainty. In conclusion, this paper shows that the maximum temperature for the module is expected to meet the temperature limitations of ACI 349.

  4. Effect of the interaction between a low tyramine-producing Lactobacillus and proteolytic staphylococci on biogenic amine production during ripening and storage of dry sausages.

    Science.gov (United States)

    Bover-Cid, S; Izquierdo-Pulido, M; Vidal-Carou, M C

    2001-04-11

    The interaction between tyrosine-decarboxylase and proteolytic activities of a Lactobacillus curvatus and Staphylococcus xylosus, respectively, on biogenic amine production during the ripening and the storage of dry fermented sausages was investigated. Water content, pH, proteolysis parameters, microbial counts, and biogenic amine contents were monitored in spontaneously and starter fermented sausages. The use of proteolytic staphylococci as starter resulted in a higher content of non-protein nitrogen and total free amino acids. Tyramine was the main amine produced in all batches. However, tyrosine-decarboxylase activity of the L. curvatus starter strain was weak and yielded lower amounts of tyramine than those produced by the wild mioroflora in the control batch. Association between tyramine production and proteolysis could only be established in a defectively dried batch. Putrescine and cadaverine accumulation was efficiently reduced in the starter-mediated fermentation, in agreement with the lower development of enterobacteria. Phenylethylamine and tryptamine were only detected in the spontaneously fermented sausages, while histamine, spermine and spermidine did not vary during the ripening. Biogenic amine levels and related parameters showed significant changes during the storage of dry sausages depending on the temperature and the batch. As a general rule, changes in the pH, proteolysis, microbial counts, and biogenic amine contents were stronger at 19 degrees C than at 4 degrees C. The results suggest that refrigeration would be advisable for preventing further accumulation of biogenic amines during the storage of dry fermented sausages.

  5. Effect of Different Conditions of Growth and Storage on the Cell Counts of Two Lactic Acid Bacteria after Spray Drying in Orange Juice

    Directory of Open Access Journals (Sweden)

    Joana Barbosa

    2016-03-01

    Full Text Available Consumers increasingly require innovative food products with health benefits. Thus, a dried orange juice incorporating probiotics could be a novel challenge. In this context, we investigated whether different sugars added to the culture media used for growth of two lactic acid bacteria contributed to their protection during spray drying in orange juice and subsequent storage under different conditions of temperature, light exposure and water activity. Cell viability during passage through simulated gastro-intestinal conditions was also investigated. Cells grown in culture medium containing fructose resulted in the worst survival rates during storage. High survival was observed for cells grown in the presence of lactose, followed by glucose. The survival of dried bacteria was enhanced at 4 °C, water activity of 0.03 and absence of daylight. For cells grown in standard culture medium and after 12 months of storage at 4 °C in orange juice powder (about 109 cfu/mL, there was a reduction of approximately 2 log-units for both lactic acid bacteria after gastro-intestinal tract passage simulation. Using the conditions of growth and storage investigated, it is possible to improve the survival rate of lactic acid bacteria and produce an orange juice powder with probiotic characteristics with shelf life of at least 12 months.

  6. Preservation of the immunogenicity of dry-powder influenza H5N1 whole inactivated virus vaccine at elevated storage temperatures.

    Science.gov (United States)

    Geeraedts, Felix; Saluja, Vinay; ter Veer, Wouter; Amorij, Jean-Pierre; Frijlink, Henderik W; Wilschut, Jan; Hinrichs, Wouter L J; Huckriede, Anke

    2010-06-01

    Stockpiling of pre-pandemic influenza vaccines guarantees immediate vaccine availability to counteract an emerging pandemic. Generally, influenza vaccines need to be stored and handled refrigerated to prevent thermal degradation of the antigenic component. Requirement of a cold-chain, however, complicates stockpiling and the logistics of vaccine distribution. We, therefore, investigated the effect of elevated storage temperatures on the immunogenicity of a pre-pandemic influenza A H5N1 whole inactivated virus vaccine. Either suspended in liquid or kept as a freeze-dried powder, vaccines could be stored for 1 year at ambient temperature (20 degrees C) with minimal loss of immunogenicity in mice. Elevation of the storage temperature to 40 degrees C, however, resulted in a significant loss of immunogenic potency within 3 months if vaccines were stored in liquid suspension. In sharp contrast, freeze-dried powder formulations were stable at 40 degrees C for at least 3 months. The presence of inulin or trehalose sugar excipients during freeze-drying of the vaccine proved to be critical to maintain its immunogenic potency during storage, and to preserve the characteristic Th1-type response to whole inactivated virus vaccine. These results indicate that whole inactivated virus vaccines may be stored and handled at room temperature in moderate climate zones for over a year with minimal decline and, if converted to dry-powder, even in hot climate zones for at least 3 months. The increased stability of dry-powder vaccine at 40 degrees C may also point to an extended shelf-life when stored at 4 degrees C. Use of the more stable dry-powder formulation could simplify stockpiling and thereby facilitating successful pandemic intervention.

  7. Changes in physicochemical and microbiological properties of isoflavone-treated dry-cured sausage from sulfur-fed pork during storage.

    Science.gov (United States)

    Kim, Ji-Han; Pyun, Chang-Won; Hong, Go-Eun; Kim, Soo-Ki; Yang, Cheul-Young; Lee, Chi-Ho

    2014-01-01

    This study was performed to investigate the physicochemical and microbiological properties of isoflavone-treated dry cured sausage from sulfur fed pork (0.3%) during storage at 15°C for 45 days. Groups were divided into three treatments: dry-cured sausages produced with pork fed general diet as the control group (CON), sulfur-fed pork (SUL) and isoflavone-(0.25%) treated sulfur-fed pork (ISO). Moisture content in all groups decreased dramatically from 55-57% to 10-11% during storage, whereas crude protein, crude fat, and ash content increased (P < 0.05). The ISO group showed excellent antioxidant effect compared to CON during storage. Redness and lightness of ISO was higher than that of CON during storage. VBN in the ISO group was significantly lower than that in the CON and SUL treatments during 30 and 45 days of storage (P < 0.05). A total plate count of ISO was significantly lower than that of CON at 45 days (P < 0.05). In this study, adding isoflavone to meat products indicated prevention of lipid oxidation and improved color stability in meat products.

  8. Viability tests of LIPI-MC mould collection in ampoule of L-drying preservation after one year of storage at 5ºC

    Directory of Open Access Journals (Sweden)

    MUHAMMAD ILYAS

    2007-01-01

    Full Text Available A study on viability test of several LIPI-MC mould isolates in ampoule of L-drying preservation after one year storage at 5º C had been conducted. In this study, cell survival level of 34 ampoules number from eight mould generas and 17 species had been counted. The objective of this study was to observe the survival or viability level of several mould isolates in ampoule L-drying preservation after one year storage at 5º C. The measurement of viability level was based on the average of colony forming unit density (CFU/ml. The result showed that there were seven mould isolates have hingh viabilitiy, 18 isolates have medium viabilitiy, two isolates have low viability, and five isolates have lost its viability.

  9. In-line near infrared spectroscopy during freeze-drying as a tool to measure efficiency of hydrogen bond formation between protein and sugar, predictive of protein storage stability

    OpenAIRE

    Mensink, Maarten A.; Van Bockstal, Pieter-Jan; Pieters, S; De Meyer, Laurens; Frijlink, Henderik W.; van der Voort Maarschalk, Kees; Hinrichs, Wouter L.J.; De Beer, Thomas

    2015-01-01

    Sugars are often used as stabilizers of protein formulations during freeze-drying. However, not all sugars are equally suitable for this purpose. Using in-line near-infrared spectroscopy during freeze-drying, it is shown here that hydrogen bond formation during freeze-drying, under secondary drying conditions in particular, can be related to the preservation of the functionality and structure of proteins during storage. The disaccharide trehalose was best capable of forming hydrogen bonds wit...

  10. Exploration and application of wet-discharging dry storage of phosphogypsum%磷石膏湿排干堆的探索和应用

    Institute of Scientific and Technical Information of China (English)

    王光明; 曹绪勇

    2011-01-01

    Based on the disadvantages of wet-discharging wet storage and dry-discharging dry storage phosphogypsum commonly used in compound fertilizer enterprise, the wet-discharging dry storage of phosphogypsum is put forward, and its process operation and advantages are introduced, which evades effectively the high threshold and risk of tailings reservoir, improves the environment, decreases the cost of operation and maintenance, has the obvious superiority.%针对目前磷复肥企业磷石膏堆存常用的湿排湿堆及千排干堆方法所存在的诸多弊端,提出采用湿排干堆,并介绍其工艺运行情况及优势,有效规避了建设尾矿库的高门槛、高风险,改善了现场环境,降低了运行维护费用,优势明显。

  11. Effect of freeze-drying, cryoprotectants and storage conditions on the stability of secondary structure of insulin-loaded solid lipid nanoparticles.

    Science.gov (United States)

    Soares, Sandra; Fonte, Pedro; Costa, Ana; Andrade, José; Seabra, Vítor; Ferreira, Domingos; Reis, Salette; Sarmento, Bruno

    2013-11-18

    This study aims to monitor the secondary structure behaviour of insulin when it is encapsulated into solid lipid nanoparticles (SLN), under the influence of several critical processing parameters. Insulin was used as a therapeutic protein model. Physicochemical properties of insulin-loaded SLN (Ins-SLN) were assessed, with special focus on the insulin secondary structure after its encapsulation into SLN and after freeze-drying using different cryoprotectants (glucose, fructose and sorbitol). Additionally, a 6-month stability study was performed to evaluate the maintenance of insulin secondary structure over time at different storage conditions (4 °C/60% RH, 25 °C/60% RH, 40 °C/75% RH). Ins-SLN were successfully produced with a mean and narrow particle size around 400 nm, zeta potential around -13 mV, an insulin association efficiency of 84%. Physical-chemical properties of SLN were maintained after freeze-drying. FTIR results showed that encapsulated insulin maintained a native-like structure in a degree of similarity around 92% after production, and 84% after freeze-drying. After 6 months, freeze-dried Ins-SLN without cryoprotectant stored at 40 °C/75% RH presented the same degree of structure preservation and morphology. Results revealed that insulin structure can be significantly protected by SLN matrix itself, without a cryoprotectant agent, even using a non-optimized freeze-drying process, and under the harsher storage conditions. Multivariable experimental settled the process parameters to fit with the desired product quality attributes regarding protein and nanoparticle stability.

  12. Inulin sugar glasses preserve the structural integrity and biological activity of influenza virosomes during freeze-drying and storage

    NARCIS (Netherlands)

    de Jonge, Jørgen; Amorij, Jean-Pierre; Hinrichs, Wouter L.J.; Wilschut, Jan; Huckriede, Anke; Frijlink, Henderik W.

    2007-01-01

    Influenza virosomes are reconstituted influenza virus envelopes that may be used as vaccines or as carrier systems for cellular delivery of therapeutic molecules. Here we present a procedure to generate influenza virosomes as a stable dry-powder formulation by freeze-drying (lyophilization) using an

  13. Quality of osmotically pre-treated and vacuum dried pineapple cubes on storage as influenced by type of solutes and packaging materials.

    Science.gov (United States)

    Paul, Prodyut Kumar; Ghosh, Swapan Kumar; Singh, Dhananjay Kumar; Bhowmick, Nilesh

    2014-08-01

    The quality and stability of osmotically pre-treated and subsequently vacuum dried pineapple cubes using three different solutes and packed in three different types of packaging materials on storage was evaluated. The experiment was laid out in completely randomized block design with two factors and three replications for each treatment. Treatment combinations were considered as one factor and storage interval as another factor. Pineapple cubes stored in glass bottle showed very little percentage variation in moisture content due to its high moisture barrier properties. In all treatment combination, acidity values were invariably found to increase as the storage progressed. For all three different osmotic treatments, HDPE pouch packet always showed highest acidity followed by PVDC pouch. Again among three solutes under consideration, invert sugar recorded a rapid increase in acidity than other solutes. In pineapple cubes osmotically treated with sucrose solution, the rates of decrease of total sugar content were lower than that of invert sugar and sorbitol treated pineapple cubes. The percentage decrease of total sugar content was highest when the osmotically dehydrated pineapple cubes were packed in HDPE pouch and it was least in glass bottles. There was a gradual decrease in ascorbic acid content with the extension of storage period and this decrease was statistically significant at all storage intervals up to six-month. Lowest value of ascorbic acid content (15.210 mg per 100 g initial solid) was recorded in invert sugar treated pineapple cube packed in HDPE pouch after 6 months of storage.

  14. ¬¬¬¬ SURVIVAL OF Cronobacter sakazakii IN SKIM MILK DURING SPRAY DRYING, STORAGE AND RECONSTITUTION [Ketahanan Hidup Cronobacter sakazakii dalam Susu Skim selama Proses Pengeringan Semprot, Penyimpanan dan Rekonstitusi

    OpenAIRE

    2012-01-01

    Cronobacter sakazakii is an emerging pathogen known to survive dry conditions and its presence in powder infant formula (PIF) has been linked to several outbreaks. In Indonesia, isolation of this bacterium from various foods have been reported. The objective of this study was to determine the effect of spray drying and storage humidity on the survival of C. sakazakii YRc3a in skim milk and their viability upon reconstitution. The survival of Cronobacter during spray drying was determined by c...

  15. Storage and stability of IgG and IgM monoclonal antibodies dried on filter paper and utility in Neisseria meningitidis serotyping by Dot-blot ELISA

    Directory of Open Access Journals (Sweden)

    Yto André Y

    2008-03-01

    Full Text Available Abstract Background A simple filter paper method was developed for, the transport and storage of monoclonal antibodies (Mabs at room temperature or -20°C after spotting on filter paper, for subsequent serotyping of outer membrane antigens of N.meningitidis by dot-blot ELISA. Methods Monoclonal antibodies (Mabs were spotted within a 0.5–1 cm diameter area of Whatman grade 903 paper, which were stored individually at room temperature or at -20°C. These MAbs were stored and analyzed after periods of one week, 4 weeks, 12 months, or 13 years in the case of frozen Mab aliquots, or after 4 weeks at -20°C or at room temperature (RT in the case of Mabs dried on filter paper strips. Assays were performed in parallel using dot-blot ELISA. In addition to the MAbs specific for serotyping class 1, 2 or 3, we used a larger number of Mabs for polysaccharides, lipooligosaccharides (LOS, class 5 and cross-reactive antigens for native outer membrane of N.meningitidis. The Mabs dried on filter paper were eluted with phosphate-buffered saline (PBS containing 0.2% gelatin. Results Mabs of the isotypes IgG and IgM dried on filter papers were not affected by duration of storage. The detection by serotyping Mabs was generally consistent for dried filter paper MAb samples stored frozen for over 1 year at -20°C, and although decreased reactive antibody titers were found after storage, this did not interfere with the specificity of the Mabs used after 13 years as dry spots on filter paper. Conclusion The use of filter paper is an inexpensive and convenient method for collecting, storing, and transporting Mab samples for serotyping studies. In addition, the samples occupy little space and can be readily transported without freezing. The efficiency of using immunoglobulin G (IgG or M (IgM eluted was found to be consistent with measurement of IgG or IgM titers in most corresponding, ascites Mabs stored frozen for over 1 year. The application of meningococcal typing

  16. Safety aspects of long-term dry interim storage of type-B spent fuel and HLW transport casks

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, D.; Probst, U.; Voelzke, H.; Droste, B.; Roedel, R. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2004-07-01

    Based on the German decision to minimise transports of spent fuel casks between nuclear power plants, reprocessing plants and central storage facilities several on-site storage facilities have been licensed till the end of 2003. Because of the large amount of type-B transport casks which are going to be used for long-term interim storage the question of time limited type-B license maintenance during the storage period of up to 40 years has been discussed under different aspects. This paper describes present technical aspects of the discussion. A main aspect of transport cask qualification for interim storage is the long-term behaviour of the metallic seal lid system. Concerning this results from current experimental long-term tests with metallic ''Helicoflex''-seals in which pool water is enclosed are presented. The test series has been performed by the Federal Institute for Materials Research and Testing (BAM) on behalf of the Federal Office for Radiation Protection (BfS) since 2001. Finally, the paper presents a German concept for an authorities' and technical experts' exchange of experience, know-how and state of the art referring to cask dispatch in nuclear facilities. BAM has taken over a central role in this so-called ''co-ordinating institution for cask dispatching information'' (''KOBAF'') which contains an online data base and a technical working group meeting twice a year. The goal is to keep comparable technical standards for all nuclear sites and storage facilities which are going to load and dispatch casks of the same or similar types under the responsibility of different German state governments for the next decades.

  17. Storage facilities of spent nuclear fuel in dry for Mexican nuclear facilities; Instalaciones de almacenamiento de combustible nuclear gastado en seco para instalaciones nucleares mexicanas

    Energy Technology Data Exchange (ETDEWEB)

    Salmeron V, J. A.; Camargo C, R.; Nunez C, A.; Mendoza F, J. E.; Sanchez J, J., E-mail: juan.salmeron@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

    2013-10-15

    In this article the relevant aspects of the spent fuel storage and the questions that should be taken in consideration for the possible future facilities of this type in the country are approached. A brief description is proposed about the characteristics of the storage systems in dry, the incorporate regulations to the present Nuclear Regulator Standard, the planning process of an installation, besides the approaches considered once resolved the use of these systems; as the modifications to the system, the authorization periods for the storage, the type of materials to store and the consequent environmental impact to their installation. At the present time the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) considers the possible generation of two authorization types for these facilities: Specific, directed to establish a new nuclear installation with the authorization of receiving, to transfer and to possess spent fuel and other materials for their storage; and General, focused to those holders that have an operation license of a reactor that allows them the storage of the nuclear fuel and other materials that they possess. Both authorizations should be valued according to the necessities that are presented. In general, this installation type represents a viable solution for the administration of the spent fuel and other materials that require of a temporary solution previous to its final disposal. Its use in the nuclear industry has been increased in the last years demonstrating to be appropriate and feasible without having a significant impact to the health, public safety and the environment. Mexico has two main nuclear facilities, the nuclear power plant of Laguna Verde of the Comision Federal de Electricidad (CFE) and the facilities of the TRIGA Reactor of the Instituto Nacional de Investigaciones Nucleares (ININ) that will require in a future to use this type of disposition installation of the spent fuel and generated wastes. (Author)

  18. Influence of storage period and packaging method on sliced dry cured beef "Cecina de Leon": Effects on microbiological, physicochemical and sensory quality.

    Science.gov (United States)

    Rubio, Begoña; Martínez, Beatriz; González-Fernández, Consuelo; Garcı A-Cachán, M A Dolores; Rovira, Jordi; Jaime, Isabel

    2006-12-01

    Quality aspects of sliced dry-cured beef "Cecina de León" preserved in vacuum and gas mixtures (20%/80% CO(2)/N(2) and 80%/20% CO(2)/N(2)) were studied. The evolution of microbiological, physicochemical and sensory parameters were analysed during storage (210 days) at 6°C. Although microbial counts at 60 days of the gas-packaged samples were lower than the vacuum-packed ones, they were never higher than the spoilage limit (7 logufc/g). A slight increase (pCecina de León" packaged under vacuum and in gas mixtures. However, a decrease (pCecina de León" packaged under vacuum but a(w) did not vary (p>0.05) during storage in the gas-packaged samples. No changes were observed (p>0.05) in lightness (L(∗)), redness (a(∗)) and yellowness (b(∗)) in vacuum and gas packaged samples during storage. However, sensorially evaluated colour showed lower values in gas packaged samples during 30 days storage. This difference was decisive in establishing the shelf-life of "Cecina de León" slices preserved in gas mixtures (20%/80% CO(2)/N(2) and 80%/20% CO(2)/N(2)). Therefore, from a microbiological point of view, gas mixtures are more effective in extending the shelf-life of "Cecina de León" slices. It is concluded that vacuum packaging allows longer storage than gas-packaging as it maintains a good visual appearance of "Cecina de León", the main parameter in consumers' perception of meat quality.

  19. Evolution of spent nuclear fuel during drying storage conditions; Evolucion del combustible nuclear gastado durante almacenamiento en condiciones de sequedad

    Energy Technology Data Exchange (ETDEWEB)

    Duro, L.; Riba, O.; Martinez-Esparza, A.; Bruno, J.

    2012-07-01

    The objective of this paper is a critical discussion of the main processes that determine the structure and radiological inventory CG UOX type and the very conditions of temporary storage. This study has allowed the configuration of state CG in potential function of oxygen affects the physico-chemical characteristics of irradiated fuel.

  20. Effects of various sulphuring methods and storage temperatures on the physical and chemical quality of dried apricots.

    Science.gov (United States)

    Coşkun, Ali Levent; Türkyılmaz, Meltem; Aksu, Özge Turfan; Koç, Betül Erkan; Yemiş, Oktay; Özkan, Mehmet

    2013-12-15

    The effects of different sulphuring methods, i.e. sulphuring by "burning the elemental sulphites (BES)," "SO2 gas from liquified SO2 tank (SG)" and "dipping into sodium metabisulphite solution (DSM)" on the colour (brown colour formation and carotenoid degradation) and the loss of SO2 in apricots from Hacıhaliloğlu and Kabaaşı varieties stored at 5, 20 and 30 °C for a year were investigated. There were significant effects of variety, sulphuring method and especially storage at 30 °C on the brown colour formation and loss of SO2 (P0.05). The changes in L(*), b(*) and C(*) values were directly associated with β-carotene content and browning values. The most suitable method for all samples, except for Hacıhaliloğlu variety stored at 30 °C (BES), is SG, because the samples retained their attractive golden yellow colour during storage.

  1. Creation of a Geant4 Muon Tomography Package for Imaging of Nuclear Fuel in Dry Cask Storage

    Energy Technology Data Exchange (ETDEWEB)

    Tsoukalas, Lefteri H. [Purdue Univ., West Lafayette, IN (United States)

    2016-03-01

    This is the final report of the NEUP project “Creation of a Geant4 Muon Tomography Package for Imaging of Nuclear Fuel in Dry Cask Storage”, DE-NE0000695. The project started on December 1, 2013 and this report covers the period December 1, 2013 through November 30, 2015. The project was successfully completed and this report provides an overview of the main achievements, results and findings throughout the duration of the project. Additional details can be found in the main body of this report and on the individual Quarterly Reports and associated Deliverables of the project, uploaded in PICS-NE.

  2. Device for checking a plate accumulator battery suited for dry storage. Vorrichtung zur Pruefung eines trocken lagerfaehigen Plattenakkumulators

    Energy Technology Data Exchange (ETDEWEB)

    Krause, E.; Rust, G.; Ilgner, R.

    1986-10-23

    The invention concerns a device which permits the checking of dry plate batteries, where the plates are wetted with an electrolyte and therefore an off load measurement of the cell voltage is possible. This device consists of a paintbrush having normal bristles (without capillaries). In order to be able to carry small quantities of liquid (50 mg) on the bristles of the paintbrush, the paintbrush passes over a sponge, which is partly immersed in a reservoir of liquid. When placing the paintbrush on the plates to be measured, there is an ion-conducting bridge set up over the whole cell, so that the voltage produced by the cell can be measured.

  3. Sodium-ion storage properties of nickel sulfide hollow nanospheres/reduced graphene oxide composite powders prepared by a spray drying process and the nanoscale Kirkendall effect

    Science.gov (United States)

    Park, G. D.; Cho, J. S.; Kang, Y. C.

    2015-10-01

    Spray-drying and the nanoscale Kirkendall diffusion process are used to prepare nickel sulfide hollow nanospheres/reduced graphene oxide (rGO) composite powders with excellent Na-ion storage properties. Metallic Ni nanopowder-decorated rGO powders, formed as intermediate products, are transformed into composite powders of nickel sulfide hollow nanospheres/rGO with mixed crystal structures of Ni3S2 and Ni9S8 phases by the sulfidation process under H2S gas. Nickel sulfide/rGO composite powders with the main crystal structure of Ni3S2 are also prepared as comparison samples by the direct sulfidation of nickel acetate-graphene oxide (GO) composite powders obtained by spray-drying. In electrochemical properties, the discharge capacities at the 150th cycle of the nickel sulfide/rGO composite powders prepared by sulfidation of the Ni/rGO composite and nickel acetate/GO composite powders at a current density of 0.3 A g-1 are 449 and 363 mA h g-1, respectively; their capacity retentions, calculated from the tenth cycle, are 100 and 87%. The nickel sulfide hollow nanospheres/rGO composite powders possess structural stability over repeated Na-ion insertion and extraction processes, and also show excellent rate performance for Na-ion storage.Spray-drying and the nanoscale Kirkendall diffusion process are used to prepare nickel sulfide hollow nanospheres/reduced graphene oxide (rGO) composite powders with excellent Na-ion storage properties. Metallic Ni nanopowder-decorated rGO powders, formed as intermediate products, are transformed into composite powders of nickel sulfide hollow nanospheres/rGO with mixed crystal structures of Ni3S2 and Ni9S8 phases by the sulfidation process under H2S gas. Nickel sulfide/rGO composite powders with the main crystal structure of Ni3S2 are also prepared as comparison samples by the direct sulfidation of nickel acetate-graphene oxide (GO) composite powders obtained by spray-drying. In electrochemical properties, the discharge capacities at the

  4. House dust and storage mite contamination of dry dog food stored in open bags and sealed boxes in 10 domestic households.

    Science.gov (United States)

    Gill, Christina; McEwan, Neil; McGarry, John; Nuttall, Tim

    2011-04-01

    Dry pet food is a potential source of exposure to house dust and storage mite allergens in canine atopic dermatitis. This study evaluated contamination of house dust and dry dog food stored in paper bags, sealable plastic bags and sealable plastic boxes in 10 households for 90 days using Acarex(®) tests for guanine, a Der p 1 ELISA and mite flotation. Acarex(®) tests were negative in all the food samples but positive in all the house dust samples. The Der p 1 levels and mite numbers significantly increased in food from paper bags (P = 0.0073 and P = 0.02, respectively), but not plastic bags or boxes. Mite numbers and Der p 1 levels were 10-1000 times higher in house dust than the corresponding food samples (P food from the paper (P food from the paper bags (P = 0.0007). Bedding and carpets were significantly associated with Der p 1 levels in house dust (P = 0.015 and P = 0.01, respectively), and food from the paper (both P = 0.02) and plastic bags (P = 0.03 and P = 0.04, respectively). Mites were identified in six of 10 paper bag, three of 10 plastic bag, one of 10 plastic box and nine of 10 house dust samples. These comprised Dermatophagoides (54%), Tyrophagus (10%; all from food) and unidentified mites (36%). Storage of food in sealable plastic boxes largely prevented contamination for 3 months. Exposure to mites and mite proteins in all the stored food, however, appeared to be trivial compared with house dust. © 2010 The Authors. Journal compilation © 2010 ESVD and ACVD.

  5. Change of quality of dry rice wine during storage%干型黄酒贮存过程中品质变化的初探

    Institute of Scientific and Technical Information of China (English)

    沈丽尧; 冷云伟; 叶辉

    2011-01-01

    The quality of new rice wine can be changed after storage. Colorimetry, gas chromatography and organoleptic evaluation were used to test color, main flavor components and taste of Huzhou dry rice wine with different storage time ranged from new rice wine to 1~5 years. The results showed that the amino and carbonyl group reacted slowly during storage, which made the wine color become deep. During the storage of rice wine,the main aromatic components in the rice wine transformed mutually, which resulted in the increment of ester content and the decrement of alcohol content. A balance and a fine rice wine with good aroma and mellow taste were obtained finally. The reason and factors of influencing the change of rice wine quality, include color, flavor and taste were analyzed. Based on these results, aging factor- micro-oxygen content was proposed and some advice on the storage of rice wine was also presented.%新酒经贮存一段时间品质明显改变,通过比色法、气相色谱及感官品尝对湖州干型黄酒当年新酒和贮存1~5年陈酒的颜色、主要芳香性成分及口感等品质因素进行测试比较.结果表明,黄酒在贮存老熟过程中氨基、羰基缓慢反应,酒体颜色逐渐加深,随着贮存期延长,黄酒中主要芳香性成分互相转化,酯含量增加,醇含量减少,最后达到一种平衡,得到香气浓郁、醇和爽适的黄酒.通过对黄酒贮存老熟过程中色、香、味等品质因素变化规律及对产生变化的原因进行初步分析和探讨,提出一个陈化因子--微氧含量,同时为黄酒贮存提出一些科学的建议.

  6. Viability of Escherichia coli O157:H7 in salami following conditioning of batter, fermentation and drying of sticks, and storage of slices.

    Science.gov (United States)

    Faith, N G; Parniere, N; Larson, T; Lorang, T D; Kaspar, C W; Luchansky, J B

    1998-04-01

    The fate of Escherichia coli O157:H7 was monitored in salami during conditioning of batter, fermentation and drying of sticks, and storage of slices. The raw batter (75% pork: 25% beef, wt/wt, fat content about 20%) was inoculated with a pediococcal starter culture (about 10(8) CFU/g) and a five-strain cocktail of E. coli O157:H7 ( > or = 2 x 10(7) CFU/g) and stuffed into 104-mm diameter fibrous casings. After being refrigerated at 4 degrees C or being tempered at 13 degrees C, frozen at -20 degrees C, and thawed at 4 degrees C, or being frozen at -20 degrees C, and thawed at 4 degrees C, the inoculated batter was fermented at 24 degrees C and 90% relative humidity (RH) to pH < or = 4.8, dried at 13 degrees C and 65% RH to a moisture/protein ratio of < or = 1.9:1, and then stored at 4 or 21 degrees C under air or vacuum. For salami sticks sampled immediately after drying, appreciable differences were evident among the various batter-conditioning treatments; pathogen numbers were reduced from original levels by 2.1, 1.6, or 1.1 log10 units when batter was tempered, frozen, and thawed, frozen and thawed, or refrigerated, respectively. Similarly, regardless of storage temperature or atmosphere, within 7 days salami slices cut from sticks prepared from batter that was tempered, frozen, and thawed (2.7- to 4.9-log10-unit reduction) or frozen and thawed (2.3- to 4.8-log10-unit reduction) displayed a greater impact on pathogen numbers than slices cut from sticks prepared from batter that was refrigerated (1.6- to 3.1-log10-unit reduction). The effects of batter conditioning notwithstanding, a greater reduction in levels of E. coli O157:H7 was observed when slices were stored at 21 degrees C compared to otherwise similar slices stored at 4 degrees C. After storage for 60 days the pathogen was only detected by enrichment in slices stored at 21 degrees C, whereas pathogen levels ranged from 1.4 to 4.5 log10 CFU/g in slices stored at 4 degrees C. Differences related to

  7. ¬¬¬¬ SURVIVAL OF Cronobacter sakazakii IN SKIM MILK DURING SPRAY DRYING, STORAGE AND RECONSTITUTION [Ketahanan Hidup Cronobacter sakazakii dalam Susu Skim selama Proses Pengeringan Semprot, Penyimpanan dan Rekonstitusi

    Directory of Open Access Journals (Sweden)

    Lilis Nuraida1,2

    2012-12-01

    Full Text Available Cronobacter sakazakii is an emerging pathogen known to survive dry conditions and its presence in powder infant formula (PIF has been linked to several outbreaks. In Indonesia, isolation of this bacterium from various foods have been reported. The objective of this study was to determine the effect of spray drying and storage humidity on the survival of C. sakazakii YRc3a in skim milk and their viability upon reconstitution. The survival of Cronobacter during spray drying was determined by comparing the number of bacteria before and after drying. The viability of Cronobacter in spray dried skim milk (SDSM during storage was observed at weeks 1 to 8 and 12. At the same intervals, SDSM containing the pathogens was reconstituted at either 27°C or 50°C and the survivors were enumerated. The data were plotted to yield survival curves. Spray drying caused 4.19 log CFU/g reduction of Cronobacter and the bacteria experiencing drying were less sensitive to reconstitution at 50°C. During storage, the water activity of SDSM reached equilibrium at week 2 and afterwards, they started to decrease when stored at 50% or 90% RH, but maintained its viability at 70% RH. Storage at 50% and 90% RH accelerated the death rate of C. sakazakii YRc3a, resulting in the decline of the viable counts for 3 log cycles. At 50% RH, C. sakazakii Yrc3a decreased significantly, but the survivors exhibited increased heat resistance with the lowest reduction upon reconstitution at 50°C (0.16 log CFU/ml.

  8. Effects of plant polyphenols and a-tocopherol on lipid oxidation, residual nitrites, biogenic amines, and N-nitrosamines formation during ripening and storage of dry-cured bacon

    Science.gov (United States)

    Effects of plant polyphenols (green tea polyphenols (GTP) and grape seed extract (GSE) and a-tocopherol on physicochemical parameters, lipid oxidation, residual nitrite, microbiological counts, biogenic amines, and N-nitrosamines were determined in bacons during dry-curing and storage. Results show ...

  9. Heat release performance of heat storage water tank with phase-change material in solar drying system%太阳能干燥相变储热水箱的放热性能

    Institute of Scientific and Technical Information of China (English)

    于海涛; 高建民; 陈瑶

    2015-01-01

    为降低传统干燥能耗,强化太阳能干燥用储热水箱的储放热能力,在普通储热水箱中添加了硬脂酸/膨胀石墨相变储热材料,研究了放热温差、储热单元体积对装置放热性能的影响。研究结果表明:相变储热水箱放热时间、放热量随着放热温差和储热水箱中储热单元体积的增加均有所提升,储热单元的添加对储热水箱的放热效果影响更为显著。放热效率则随着放热温差的增大而降低,随着储热水箱中储热单元体积的增加而显著提升;储热水箱中储热单元体积为35%时,相变储热水箱的放热时间比普通储热水箱最多提升了1.26倍,放热温度最大可提高8.7℃,热效率最多可提高22.56%。%Drying is an essential process for a large number of industrial and agricultural products. In order to reduce energy consumption of traditional drying, improve its utilization efficiency and strengthen the capacity of heat storage water tank for solar drying, the stearic acid/expanded graphite composite phase-change material (PCM) with melting point of 52.74℃ and latent heat of 169.90 J/g was added into the conventional heat storage water tank in this paper. The schematic structure of the solar drying system mainly consisted of solar collector, drying oven, heat storage water tank and phase-change thermal energy storage units. The effect of heat release temperature difference and heat storage unit volume on the heat release performance of the device was studied under the same heat release conditions. The total volume of the PCM containers in the heat storage water tank was 15%, 25% and 35%, respectively. The heat storage water tank was heated to 60, 65 and 75℃ by using solar collector in heat storage process. Then the heat storage water tank was used to provide heat for the drying oven, and the heat release process was finished when the temperature of drying oven was 40℃ . The results showed that the

  10. Comparison of modified atmosphere packaging and vacuum packaging for long period storage of dry-cured ham: effects on colour, texture and microbiological quality.

    Science.gov (United States)

    García-Esteban, Marta; Ansorena, Diana; Astiasarán, Iciar

    2004-05-01

    Slices of dry-cured hams (Biceps femoris muscle) were stored during 8 weeks under vacuum and modified atmospheres (100% N(2) and a mixture of 20% CO(2) and 80% N(2)) in order to study the modifications on colour, texture and microbial counts during that period. Lightness was found to be more stable when samples were stored with 20% CO(2) and 80% N(2) without statistical differences between vacuum and 100% N(2). A slight whiteness was observed in the vacuum packed samples. Yellowness increased during time in vacuum packed samples, although no differences were found among the three conditions at the end of the study. Redness values were not affected by time or by the packaging system. With regard to texture, values found for all samples were within the normal range for this type of products, although it was observed that modified atmosphere packaging preserved samples better from hardening than vacuum packaging. No safety problems were detected in relation to the microbial quality in any case. In general, no clear differences were found among the three packaging systems for colour, texture and microbial quality in the storage conditions studied.

  11. Specific outcomes of the research on the spent fuel long-term evolution in interim dry storage and deep geological disposal

    Science.gov (United States)

    Ferry, C.; Poinssot, C.; Cappelaere, C.; Desgranges, L.; Jegou, C.; Miserque, F.; Piron, J. P.; Roudil, D.; Gras, J. M.

    2006-06-01

    This paper presents an overview of the main results of the French research on the long-term evolution of spent fuel. The behavior of the spent fuel rods in the various conditions likely to be encountered during dry storage and deep geological disposal, i.e., in a closed system, in air and in water were investigated. It appears that in a closed system the effects of helium production on the mechanical stability of grain boundaries remain the major unanswered question. In air, microscopic characterization of the UO2 oxidation leads to introduce a new phase in the classical oxidation scheme. The limiting step assumption on which the oxidation kinetics are based is only partially valid. In water, the effect of the alpha radiolysis which accelerates UO2 dissolution was demonstrated for anoxic conditions. However this effect could be counteracted by the environmental conditions, such as the presence of H2 produced by the container corrosion. The effects of the environmental parameters on the fuel matrix dissolution still need to be assessed.

  12. In-line near infrared spectroscopy during freeze-drying as a tool to measure efficiency of hydrogen bond formation between protein and sugar, predictive of protein storage stability.

    Science.gov (United States)

    Mensink, Maarten A; Van Bockstal, Pieter-Jan; Pieters, Sigrid; De Meyer, Laurens; Frijlink, Henderik W; van der Voort Maarschalk, Kees; Hinrichs, Wouter L J; De Beer, Thomas

    2015-12-30

    Sugars are often used as stabilizers of protein formulations during freeze-drying. However, not all sugars are equally suitable for this purpose. Using in-line near-infrared spectroscopy during freeze-drying, it is shown here that hydrogen bond formation during freeze-drying, under secondary drying conditions in particular, can be related to the preservation of the functionality and structure of proteins during storage. The disaccharide trehalose was best capable of forming hydrogen bonds with the model protein, lactate dehydrogenase, thereby stabilizing it, followed by the molecularly flexible oligosaccharide inulin 4kDa. The molecularly rigid oligo- and polysaccharides dextran 5kDa and 70kDa, respectively, formed the least amount of hydrogen bonds and provided least stabilization of the protein. It is concluded that smaller and molecularly more flexible sugars are less affected by steric hindrance, allowing them to form more hydrogen bonds with the protein, thereby stabilizing it better.

  13. License considerations of the temporary storage in dry of the nuclear spent fuel of light water reactors; Consideraciones de licenciamiento del almacenamiento temporal en seco del combustible gastado nuclear de reactores de agua ligera

    Energy Technology Data Exchange (ETDEWEB)

    Bazan L, A.; Vargas A, A.; Cardenas J, J. B., E-mail: ariadna.bazan@cfe.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Carretera Cardel-Nautla Km 42.5, Alto Lucero, Veracruz (Mexico)

    2011-11-15

    The spent fuel of the nuclear power plants of light water is usually stored in cells or frames inside steel coating pools. The water of the spent fuel pool has a double function: it serves as shielding or barrier for the radiation that emits the spent fuel and, on the other hand, to cool it in accordance with its decay in the time. The administration policies of the spent fuel vary of some countries to other, resulting common to all the cases this initial stage of cooling in the pools, after its irradiation in the reactor. When is not possible to increase more this capacity, usually, technologies of temporary storage in dry of the spent fuel in independent facilities are used. The storage in dry of the spent fuel differs of the storage in the fuel pools making use of gas instead of water as coolant and using metal or concrete instead of the water like barrier against the radiation. The storage industry in dry offers a great variety of technologies, which should be certified by the respective nuclear regulator entity before its use. (Author)

  14. Preservation of H2 production activity in nanoporous latex coatings of Rhodopseudomonas palustris CGA009 during dry storage at ambient temperatures: Preservation of R. palustris latex coatings

    Energy Technology Data Exchange (ETDEWEB)

    Piskorska, M. [Univ. of South Carolina, Aiken, SC (United States); Soule, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gosse, J. L. [North Carolina State Univ., Raleigh, NC (United States); Milliken, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Flickinger, M. C. [North Carolina State Univ., Raleigh, NC (United States); Smith, G. W. [Univ. of South Carolina, Aiken, SC (United States); Yeager, C. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2013-01-21

    To assess the applicability of latex cell coatings as an ‘off-the-shelf’ biocatalyst, the effect of osmoprotectants, temperature, humidity and O2 on preservation of H2 production in Rhodopseudomonas palustris coatings was evaluated. Immediately following latex coating coalescence (24 h) and for up to 2 weeks of dry storage, rehydrated coatings containing different osmoprotectants displayed similar rates of H2 production. Beyond 2 weeks of storage, sorbitol-treated coatings lost all H2 production activity, whereas considerable H2 production was still detected in sucrose- and trehalose-stabilized coatings. The relative humidity level at which the coatings were stored had a significant impact on the recovery and subsequent rates of H2 production. After 4 weeks storage under air at 60% humidity, coatings produced only trace amounts of H2 (0–0.1% headspace accumulation), whereas those stored at < 5% humidity retained 27–53% of their H2 production activity after 8 weeks of storage. In conWhen stored in argon at < 5% humidity and room temperature, R. palustris coatings retained full H2 production activity for 3 months, implicating oxidative damage as a key factor limiting coating storage. Overall, the results demonstrate that biocatalytic latex coatings are an attractive cell immobilization platform for preservation of bioactivity in the dry state.

  15. Influence of low dose of gamma radiation and storage on some vitamins and mineral elements of dried oyster mushrooms (Pleurotus ostreatus).

    Science.gov (United States)

    Kortei, Nii Korley; Odamtten, George Tawia; Obodai, Mary; Wiafe-Kwagyan, Michael; Addo, Edward Adotey

    2017-05-01

    Mushrooms contain some of the most potent natural medicines on the planet. Vitamins A, C, D, Mineral elements, contents, as well as total soluble solids (Brix(o)) of dried composition of Pleurotus ostreatus were investigated after exposing to gamma radiation doses of 0 (control), 0.5, 1, 1.5, and 2 kGy at a dose rate of 1.7 kGy per hour in air from a Cobalt 60 source (SLL 515, Hungary) batch irradiator prior to storage (0 month) and after storage (12 months) at room temperature (28 ± 2°C). Results obtained showed some significant (p differences due to irradiation and storage. Before storage, vitamins A, C, and D contents of dried and irradiated mushrooms ranged 0.003 ± 0.08-0.014 ± 0.08, 0.042 ± 1.06-0.132 ± 1.06, and 0.040 ± 0.76-0.057 ± 0.76 mg/g, respectively. After 12 months, vitamin contents decreased and ranged 0.0029 ± 0.08-0.010 ± 0.08, 0.038 ± 1.06-0.125 ± 1.06, and 0.031 ± 0.76-0.05 ± 0.76 mg/g for vitamins A, C, and D, respectively. Total soluble solids recorded 1.5 Brix(o), however, showed no significant difference (p > .05) and did not change in 12 months after gamma irradiation up to 2 kGy. Sodium ranged from 14.00 ± 0.7 to 14.90 ± 0.8 mg/100 g. Potassium content varied from 30.20 ± 0.5 to 33.10 ± 0.6 mg/100 g. Magnesium content ranged 1.27 ± 0.15-3.53 ± 0.04 mg/100 g. Calcium ranged 11.00 ± 0.4-12.53 ± 0.4 ± 0.03 mg/100 g. Phosphorus content ranged 6.11 ± 0.30-6.41 ± 0.35 mg/100 g, whereas Nitrogen content was found to be 3.00 ± 0.03-3.60 ± 0.25 mg/100 g. Microelements or heavy metals included Copper; detected ranged 0.00 ± 0.00-0.02 ± 0.001 mg/100 g, Zinc content ranged 0.01 ± 0.002-0.03 ± 0.001 mg/100 g. Iron content was found to be in the range 0.29 ± 0.01-0.37 ± 0.1 mg/100 g. Manganese content was found to be in the range 0.03 ± 0.001-0.04 ± 0.01 mg/100 g. Lead content was found to be 0.00 ± 0.00-0.03 ± 0.001

  16. Appraisal of selected osmoprotectants and carriers for formulating Gram-negative biocontrol agents active against Fusarium dry rot on potatoes in storage

    Science.gov (United States)

    The production of a dry formulation containing a high titer of viable cells of a Gram-negative biological control agent is a challenging and critically important step in developing the agent into a commercial product. Producing a dry formulation using methods based on air-drying is especially attrac...

  17. Mechanical and fracture behavior of nuclear fuel cladding in terms of transport and temporary dry storage; Comportamiento mecanio y en fractura de vainas de combustible nuclear en condiciones de transporte y almacenamiento temporal en seco

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Hervias, J.; Martin Rengel, M. A.; Gomez, F. J.

    2012-11-01

    In this work, the most relevant results of a research project on the mechanical and fracture behavior of cladding in transport and dry storage conditions are summarized. the project is being carried out at Universidad Politecnica de Madrid in collaboration with ENUSA, ENRESA and CSN. Non-irradiated cladding is investigated. The main objective is to determine a failure criterion of cladding as a function of hydrogen content, temperature and strain rate. (Author)

  18. Remote search for gamma sources at the dry storage unit 3A in Andreeva bay and the determination of their dose rates during activities for improvement to the radiological environment

    OpenAIRE

    Ivanov Kirill E.; Varnavin Anatoly P.; Korolev Andrey V.; Stepennov Boris S.; Sukhoruchkin Andrey K.; Teterin Yury A.; Teterin Anton Yu.; Kharitonov Vladimir V.; Selishev Valery A.; Fedoseenkov Alexander N.; Krasnoshekov Alexander N.; Kosnikov Alexander S.; Kostikov Dmitry A.

    2012-01-01

    The remotely controlled replacement of the concrete covering of the spent fuel dry storage unit 3A with a new iron horizontal biological shielding was carried out during works aimed at the improvement of the radiological environment at the NWC “SevRAO” - Branch of FSUE “RosRAO”, Andreeva Bay, Murmansk Region. Video control systems, a BROKK robotic manipulator, HIAB manipulator crane, gamma detectors of the ASCRO radiation monitoring system, and a CARTOGAM gamma camera were employed. A C...

  19. Remote search for gamma sources at the dry storage unit 3A in Andreeva bay and the determination of their dose rates during activities for improvement to the radiological environment

    Directory of Open Access Journals (Sweden)

    Ivanov Kirill E.

    2012-01-01

    Full Text Available The remotely controlled replacement of the concrete covering of the spent fuel dry storage unit 3A with a new iron horizontal biological shielding was carried out during works aimed at the improvement of the radiological environment at the NWC “SevRAO” - Branch of FSUE “RosRAO”, Andreeva Bay, Murmansk Region. Video control systems, a BROKK robotic manipulator, HIAB manipulator crane, gamma detectors of the ASCRO radiation monitoring system, and a CARTOGAM gamma camera were employed. A CARTOGAM gamma camera was used in all stages of the work involving high radiation levels for the remote location of the most dangerous gamma radiation sources and the evaluation of their dose rates. Gamma detectors of the ASCRO radiation monitoring system were located at several spots of the dry storage unit 3A in order to control the radiation situation. The use of the ASCRO and CARTOGAM has allowed us to avoid unauthorized exposure of the staff involved in the operations at the dry storage unit 3A site.

  20. Temporary storage in dry of the spent nuclear fuel in the Nuclear Power Plant of Laguna Verde; Almacenamiento temporal en seco del combustible nuclear gastado en la Central Nuclear Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, N.; Vargas A, A., E-mail: natividad.hernandez@cfe.gob.mx [Comision Federal de Electricidad, Gerencia de Centrales Nucleoelectricas, Carretera Veracruz-Medellin Km. 7.5, 94270 Dos Bocas, Veracruz (Mexico)

    2013-10-15

    To guarantee the continuity in the operation of the two nuclear reactors of the nuclear power plant of Laguna Verde (NPP-L V) is an activity of high priority of the Comision Federal de Electricidad (CFE) in Mexico. At the present time, the CFE is working in the storage project in dry of the spent fuel with the purpose of to liberate space of the pools and to have the enlarged capacity of storage of the spent fuel that is discharged of the reactors. This work presents the storage option in dry of the spent fuel, considering that the original capacity of the spent fuel pools of the NPP-L V was of 1242 spaces each one and that in 1991, through a modification of the original design, the storage capacity was increased to 3177 spaces by pool. At present, the cells occupied by unit are of 2165 (68%) for the Unit-I and 1839 (58%) for the Unit-2, however, in 2017 and 2022 the capacity to discharge the complete core will be limited by what is required of a retirement option of spent fuel assemblies to liberate spaces. (author)

  1. Dry Eye

    Science.gov (United States)

    ... Eye > Facts About Dry Eye Facts About Dry Eye This information was developed by the National Eye ... the best person to answer specific questions. Dry Eye Defined What is dry eye? Dry eye occurs ...

  2. Effects of Two Types of Packages on Quality of Dried Hot Pepper Fruit in Room-Temperature Storage%常温贮藏条件下两种包装对干椒品质的影响研究

    Institute of Scientific and Technical Information of China (English)

    宋占锋; 滕有德; 李跃建; 吴剑

    2012-01-01

    研究了常用的两种包装材料在常温贮藏条件下,干椒外观品质和干椒色泽、辣(气)味、脆度、水分含量、辣椒素含量、含油率等指标的变化规律。结果表明:采用编织袋常温贮藏干椒,贮藏时间短于6个月,且品质变化快;而采用塑料袋常温贮藏干椒,贮藏时间可达12个月,且品质变化慢。采用编织袋和塑料袋常温贮藏干椒,都会引起干椒辣椒素和含油率的下降,但采用编织袋贮藏的干椒下降幅度比塑料袋大。采用编织袋常温贮藏的干椒,水分含量变化幅度大,明显高于采用塑料袋常温贮藏的干椒,且干椒霉变速度快。%This study investigated some effects of 2 types of common packaging materials on dried hot pepper fruit's appearance quality, colour, pungency, crispness, moisture content, capsaicinoid content and oil rate in room-temperature storage. The results showed that the storage life of the dried fruit packaged in woven bags was shorter than 6 months with the fruit quality changing quickly; but the storage life of the dried fruit packaged in plastic bags could be up to 12 months with the fruit quality changing slowly. The room-temperature storage of the dried fruit packaged in the woven bags or plastic bags could cause the capsaicin and oil rate of the dried fruit to decline, but the decline rates of capsaicin and oil rate of the woven bag treatment were greater than those of the plastic bag treatment. The change rate of moisture content of the woven bag treatment was greater than that of the plastic bag treatment, and the dried fruit in the woven bags mildewed more easily.

  3. MODELING THE SURVIVAL OF ESCHERICHIA COLI O157:H7, LISTERIA MONOCYTOGENES AND SALMONELLA TYPHIMURIUM DURING FERMENTATION, DRYING, AND STORAGE OF SOUDJOUK-STYLE FEREMENTED SAUSAGE

    Science.gov (United States)

    Outbreaks of foodborne illnesses have been linked to the consumption of fermented dry and semi-dry sausage (FDDS) contaminated with E. coli O157:H7 and Salmonella spp. This study quantified and modeled the survival of E. coli O157:H7, L. monocytogenes and S. typhimurium in soudjouk-style sausage ...

  4. Mechanisms of deterioration of nutrients. [of freeze dried foods

    Science.gov (United States)

    Karel, M.; Flink, J. M.

    1976-01-01

    Methods which produce freeze dried foods of improved quality were examined with emphasis on storage stability. Specific topics discussed include: microstructure of freeze dried systems, investigation of structural changes in freeze dried systems, artificial food matrices, osmotic preconcentration to yield improved quality freeze dried fruits, and storage stability of osmotically preconcentrated freeze dried fruits.

  5. 3D analysis of thermo-fluid dynamics of a dry storage fuel container in stationary conditions; Analisis 3D de la termo-fluidodinamica de un contenedor de almacenamiento en seco de combustible en condiciones estacionarias

    Energy Technology Data Exchange (ETDEWEB)

    Penalva, J.; Feria, F.; Herranz, L. E.

    2012-07-01

    Dry storage containers must ensure the cooling of the fuel housing. Compliance with this requirement is of huge importance to preserve the integrity of spent fuel. In this sense, the thermo-fluid dynamics of containers is a point to consider in safety studies of this storage system. The aim of this work is to achieve a three-dimensional model of thermo-fluid dynamics of the HI-STORM 100S container using Fluent code. In addition to the fundamental characterization of the device, we have studied the impact of design variations associated with the input and output channels air. In the future, the model presented here will provide a basis for analysis of transient and accidental conditions.

  6. Qualidade fisiológica de sementes de palmiteiro-vermelho em função da desidratação e do armazenamento Physiological quality of Euterpe espiritosantensis seeds as affected by partial drying and storage

    Directory of Open Access Journals (Sweden)

    Cibele C Martins

    2007-06-01

    recalcitrant, presenting sensibility to dehydration and difficulty for storage. In some species with recalcitrant seeds, partial drying favors the maintenance of viability during storage. The objective of this research was to study the effects of partial drying and storage on germination and vigor of E. espiritosantensis seeds. Two seed lots (L1 and L2 were dried for 0; 20, and 40 hours in a dry chamber and stored at 15ºC in closed plastic bags. An assay for each seed lot was carried out on a completely randomized design, with treatments arranged in an 3 x 6 (L1 and 3 x 10 (L2 factorial scheme, corresponding to three seed drying periods and six or ten weeks of storage. Seed quality was evaluated every six weeks, during 30 and 54 weeks for L1 and L2, respectively. Seed water content (U, percentage of germination (G and vigor (first counting of germination test and index germination rate were assessed. Water content during storage, were, in both lots, on average 46; 40, and 36%, respectively, for 0; 20, and 40 hours of drying, without important changes due to storage period. For non-stored seeds, drying reduced significantly vigor, but did not interfere with germination. Seed lot L1 presented viable seeds in all sub lots until the end of the storage period (G = 71, 61 and 45% for 0; 20 and 40 hours, respectively. Seeds on lot L2 lost viability completely in the 30th week in the 40 hours of drying treatment (U=36%. Seeds in other treatments remained viable up to 54 weeks of storage (G = 46%. Partial drying reduced vigor and decreased seed longevity. Seeds from E. espiritosantensis can be stored without drying, with 45-46% of water content.

  7. Dry-fog controlled humidity system and its application in fruit & vegetable storage%干雾湿度控制系统的组建及果蔬贮藏保鲜应用试验

    Institute of Scientific and Technical Information of China (English)

    孟祥春; 黄泽鹏; 毕方铖; 金文渊

    2016-01-01

    To keep fresh and quality of postharvest fruit & vegetable, it is the most important to provide storage environments with high relative humidity (RH). Currently in China, the two mainly used humidification methods are packaging with plastic membrane/bag and installing ultrasonic humidifier in the storage room. All these methods have different degree of disadvantages. In order to provide steady high RH and keep fresh for unpackaged fruits & vegetable under storage, a kind of dry-fog controlled humidifier system was designed and built. Main parts of the system are humidity sensor, Israeli made atomizerwith orifice size of5 mm, water purification system, air compress system, purified water storage tank, pressure regulation and controlling device, water and air transportation tubes, and micro-computer controlling terminal. Mists generated through the fogger had average particle diameters of 2-10μm, which can rapidly spread and integrate into surrounding environment air, providing RH as high as 90%-98%. The humidity sensor in the storage room can continually sense changes of humidity and transmit the signal to the micro-computer controlling terminal, then the controlling unit can automatically control on or off of the atomizer. So that RH in the storage room can keep at the setting point level, and this was demonstrated by RH monitor within 24 hours after system and responding efficiency tests. Application test and evaluation on fruit & vegetable fresh keeping was conducted, and the results showed that tested fruit & vegetable stored under dry-fog controlled humidifier had much less weight loss than those stored under natural RH condition, but at the same water content level as those packaged with plastic bag. In addition, storage time and shelf life of the tested fruit and vegetable exposed to the dry fog was doubled as compared to those stored in the natural RH condition. Overall sensory quality index of dry-fog exposed fruit and vegetable was also improved. Moreover

  8. Evaluation of the criticality of a concrete container for storage of spent fuel in dry with MCNP; Evaluacion de la criticidad de un contenedor de concreto para almacenamiento de combustible gastado en seco con MCNP

    Energy Technology Data Exchange (ETDEWEB)

    Xolocostli M, J. V.; Ramirez S, J. R., E-mail: vicente.xolocostli@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-10-15

    A main concern exists inside the nuclear power plants in operation around the world that is the with respect to the storage capacity of the spent fuel, due to the useful life of the plant and the storage capacity in the spent fuel pool. In diverse countries is believed that one of the best alternatives for the spent fuel is the reprocessing of the same one since exists a great quantity of fissile material that can be profitable as the Pu-239, but even so the costs for the reprocessing continue being high, what limits taking this process to great scale. Is for that reason the importance of the containers for storage of spent fuel in dry which has had a great apogee in the last years, since they represent an alternative to store the spent fuel before making a decision on the reprocessing of the same one or the final disposal. In this work an evaluation of the criticality of a concrete container for storage of spent fuel in dry commercially available is made, and which is useful for fuel assemblies type PWR like BWR, in our case only the type BWR is considered. For the analysis of the evaluation was used the code MCNP5, considering the characteristics of the concrete container according to the available data, although the type of fuel assembly is BWR one of the models of the ABB company was considered with which the comparative of the results is made. The made calculations were carried out considering the inundation of the gap that exist and the external cavity, being this the most extreme condition to arrive to the criticality or in the case of happening an accident to have the filtration of the water toward the space of the gap. (author)

  9. Study of a brazilian cask and its installation for PWR spent nuclear fuel dry storage; Estudo de um casco nacional e sua instalacao para armazenagem seca de combustivel nuclear queimado gerado em reatores PWR

    Energy Technology Data Exchange (ETDEWEB)

    Romanato, Luiz Sergio

    2009-07-01

    Spent nuclear fuel (SNF) is removed from the nuclear reactor after the depletion on efficiency in generating energy. After the withdrawal from the reactor core, the SNF is temporarily stored in pools at the same site of the reactor. At this time, the generated heat and the short and medium lived radioactive elements decay to levels that allow removing SNF from the pool and sending it to temporary dry storage. In that phase, the fuel needs to be safely and efficiently stored, and then, it can be retrieved in a future, or can be disposed as radioactive waste. The amount of spent fuel increases annually and, in the next years, will still increase more, because of the construction of new nuclear plants. Today, the number of new facilities back up to levels of the 1970's, since it is greater than the amount of decommissioning in old installations. As no final decision on the back-end of the nuclear fuel cycle is foreseen in the near future in Brazil, either to recover the SNF or to consider it as radioactive waste, this material has to be isolated in some type of storage model existing around the world. In the present study it is shown that dry SNF storage is the best option. A national cask model for SNF as well these casks storage installation are proposed. It is a multidisciplinary study in which the engineering conceptual task was developed and may be applied to national SNF removed from the Brazilian power reactors, to be safely stored for a long time until the Brazilian authorities will decide about the site for final disposal. (author)

  10. Effects of dry brining, liquid smoking and high-pressure treatment on the physical properties of aquacultured King salmon (Oncorhynchus tshawytscha) during refrigerated storage.

    Science.gov (United States)

    Kong, Kelvin Jia Wey; Alçiçek, Zayde; Balaban, Murat O

    2015-03-15

    Aquacultured King salmon (Oncorhynchus tshawytscha) pieces were dry brined with a salt/brown sugar mix, dipped in liquid smoke for 3 min, vacuum packed, high hydrostatic pressure (HHP) treated at 600 or 200 MPa for 5 min and stored at 4 °C for up to 40 days. The surface redness (average a*) of the samples increased after dry brining, then decreased after liquid smoke treatment. HHP did not change the outside color of liquid-smoked samples. However, the inside color changed depending on pressure. HHP-treated control samples without dry brining and liquid smoking changed to a pale pink color. HHP at 600 MPa resulted in a significant increase in hardness. Compared with fresh samples, dry-brined samples had reduced water activity, while samples dipped in liquid smoke had lower pH values. Dry brining and liquid smoking protect the outside color of salmon against changes caused by HHP. The increase in hardness may counteract the softening of the smoked salmon tissue over time. © 2014 Society of Chemical Industry.

  11. Survivability of porcine epidemic diarrhea virus (PEDV) in bovine plasma submitted to spray drying processing and held at different time by temperature storage conditions.

    Science.gov (United States)

    Pujols, Joan; Segalés, Joaquim

    2014-12-05

    Bovine plasma was inoculated with porcine epidemic diarrhea virus (PEDV) at an average final titer of 4.2 log10 TCID50/mL to determine the effect of spray drying on viral inactivation. Using a laboratory scale drier, inoculated plasma was spray dried at 200 °C inlet temperature and either 70 or 80 °C throughout substance. Both liquid and dried samples were subjected to three passages on VERO cell monolayers to determine PEDV infectivity. Results indicated liquid samples contained infective virus, but none of the spray dried samples were infectious. Also, survivability of PEDV inoculated on spray dried bovine plasma (SDBP) and stored at 4, 12 or 22 °C was determined for 7, 14 and 21 days. Commercial SDBP powder was inoculated with PEDV to an average final titer of 2.8 log10 TCID50/g. Five samples per time and temperature conditions were subjected to three passages on VERO cell monolayers to determine PEDV infectivity. The virus was non-infectious for all samples stored at 22 °C at 7, 14 and 21 days. PEDV was infective in 1 out of 5 samples stored at 12 °C at 7 days, but none of the samples stored for 14 and 21 days were infectious in cell culture. For samples stored at 4 °C, 4 out of 5 samples were infectious at 7 days, 1 out of 5 samples were infectious at 14 days, but none were infectious at 21 days. In summary, PEDV was not infectious on cell culture within 7 days when stored at room temperature and within 21 days when stored at refrigerated temperature.

  12. 发酵芹菜粉对风干肠冷藏过程中理化特性的影响%Effect of Fermented Celery Powder on the Physicochemical Properties of Dried Sausage during Cold Storage

    Institute of Scientific and Technical Information of China (English)

    任小青; 刘彩红; 马俪珍

    2015-01-01

    利用发酵芹菜粉(Fermented Celery Powder,FCP ) 替代亚硝酸盐生产风干肠.将3种发酵芹菜粉(FCP506、FCP504、FCPmlz)分别替代亚硝酸盐,同时以添加亚硝酸盐(0.1 g/kg)为阳性对照组(PC),不添加亚硝酸盐为阴性对照组(NC)生产风干肠,探究风干肠成熟后,经过真空包装,在4℃的条件下贮藏4周,FCP对其理化特性的影响.研究结果表明:冷藏期间,5组风干肠的pH、Aw和水分含量变化差异不显著;NC组的TBARS值、TVB-N值明显高于其他4组(P<0.05),NC组的亚硝酸盐残留量、a*值明显低于其他4组(P<0.05),而PC、FCP506、FCP504和FCPmlz 4组之间差异不显著.说明FCP应用于风干肠可以替代亚硝酸盐的发色、抗氧化等作用,为生产天然肉制品奠定了理论基础.%Fermented celery powder (FCP) was used to make the dried sausage in this experiment.Five groups of dried sausages were set up: FCP506,FCP504,FCPmlz,PC (with 0.1 g/kg sodium nitrite) and NC (without sodium nitrite) and the pH,content of water,Aw,nitrite residue,TBARS value,TVB-N value and a*value were measured during cold storage.The results showed during cold storage,Aw,water content and pH in 5 groups of dried sausage were not significant difference;TBARS value and TVB-N value in the dried sausage with NC were significantly higher than the others (P<0.05),nitrite residue and a*value in the dried sausage with NC were significantly lower than the others (P<0.05),and the FCP506,FCP504,FCPmlz and PC group were not significant difference.Therefore,these results indicated that FCP was a useful alternative for cured meat products.

  13. Studies into the Stability of 3-O-Glycosylated and 3,5-O-Diglycosylated Anthocyanins in Differently Purified Liquid and Dried Maqui (Aristotelia chilensis (Mol.) Stuntz) Preparations during Storage and Thermal Treatment.

    Science.gov (United States)

    Brauch, Johanna E; Kroner, Mareike; Schweiggert, Ralf M; Carle, Reinhold

    2015-10-07

    Anthocyanin stabilities in diluted and differently purified maqui preparations were assessed during storage and thermal treatment at different pH values. By sequentially depleting the matrix, the influence of polar low-molecular-weight matrix constituents and non-anthocyanin phenolics was shown to be negligible. In contrast, pH substantially affected thermal stabilities of differently glycosylated cyanidin and delphinidin derivatives. At pH 3.6, half-lives of 3-O-glycosides were substantially shorter than those of respective 3,5-O-diglycosides. However, at pH 2.2, an inverse stability behavior was observed. Findings were corroborated using isolated pigments. Upon heating, cyanidin derivatives were more stable than their respective delphinidins, but their stability was similar during storage. Anthocyanins in liquid samples were more stable when stored at 4 °C as compared to 20 °C, whereas those in dried powders revealed maximum stability throughout storage. The study contains a detailed discussion and mechanistic hypothesis for the above-mentioned findings, providing insights relevant for food applications of maqui anthocyanins.

  14. Oxidation of nuclear fuel below 400 deg. Consequence on long-term dry storage; L'oxydation du combustible nucleaire au-dessous de 400 deg. Consequences sur l'entreposage a sec de longue duree

    Energy Technology Data Exchange (ETDEWEB)

    Dehaudt, Ph

    2000-07-01

    This document reviews the status of the knowledge on the oxidation of fuels below 400 deg C, in all its forms, including fuel rods, by examining the consequences of this reaction on the strength or ruin of the fuel rods during dry storage in air for a hundred years. The data available in the scientific literature, and the data acquired by CEA, are abundant on irradiated powders and pellets, but sparser for irradiated fuel fragments and for rods or sections of fuel rods. A bibliographic review is made to identify the morphological and structural changes, as well as the kinetic laws. An analysis and a summary is made with a concern to evaluate the risks of rod ruin by oxidation. The final section, in a few pages, addresses the essential lessons from this study. It presents: first, a summary of the main results of this review and its analysis, recommendations and remedies for storage; proposed research guidelines as well as precise topics, in order to fill out our knowledge and, even better, to identify the acceptable limits for storage. (author)

  15. Qualidade do café natural e despolpado após diferentes tipos de secagem e armazenamento Quality of natural and washed coffee after different types of drying and storage

    Directory of Open Access Journals (Sweden)

    Paulo C. Coradi

    2008-04-01

    Full Text Available Para se comparar as alterações na qualidade do café natural e despolpado em condições de umidades relativas de 60 e 80% e temperatura controlada de 23 °C aos 90 e 180 dias de armazenamento, realizou-se este trabalho no Departamento de Engenharia e no Pólo de Tecnologia em Pós-Colheita do Café da Universidade Federal de Lavras. A colheita do café, variedade Topázio, foi seletiva, enquanto uma parte foi despolpada e a outra processada de forma natural; no entanto, uma parcela de cada tipo de café foi conduzida para a secagem em terreiro e a outra parcela para secagem com temperaturas de 40 e 60 °C; após a secagem, o café foi armazenado em ambiente hermético mantendo-se constantes as umidades relativas de 60 e 80%. Para avaliação da qualidade foram feitas análises sensoriais, teste de acidez graxa e avaliação quantitativa da cor. Os resultados obtidos no presente trabalho permitem concluir que: a acidez graxa aumenta ao longo do tempo de armazenamento nas condições de 60 e 80% de umidade relativa; a descoloração do café é mais intensa ao longo do tempo de armazenamento para as condições de 80% de umidade relativa; aos 180 dias de armazenamento, a análise sensorial do café é menos afetada pela interação secagem, processamento e armazenamento, nas condições de 60% de umidade relativa.For comparing the alterations in the quality of natural and washed coffee under 60 to 80% relative humidity conditions from and controlled temperature of 23 °C at 90 and 180 days of storage, this work was accomplished in the Engineering Department and Coffee Post-Harvest Technology Centre of the Federal University of Lavras. The harvest of coffee, variety Topazio was selective, while a part of the coffee was pulped and the rest processed in the dry method. However, a part of each type of coffee was ground dried and the rest dried at temperatures of 40 and 60 °C; after drying, the coffee was stored in an air-tight place with

  16. Comparison of modified atmosphere packaging and vacuum packaging for long period storage of dry-cured ham: effects on colour, texture and microbiological quality

    OpenAIRE

    Garcia-Esteban, M. (Marta); Ansorena, D. (Diana); Astiasarán, I. (Iciar)

    2004-01-01

    Slices of dry-cured hams (Biceps femoris muscle) were stored during 8 weeks under vacuum and modified atmospheres (100% N2 and a mixture of 20% CO2 and 80% N2) in order to study the modifications on colour, texture and microbial counts during that period. Lightness was found to be more stable when samples were stored with 20% CO2 and 80% N2 without statistical differences between vacuum and 100% N2. A slight whiteness was observed in the vacuum packed samples. Yellowness increased during time...

  17. Survival rate of Saccharomyces boulardii adapted to a functional freeze-dried yoghurt, related to processing, storage and digestion by experimental Wistar rats

    Directory of Open Access Journals (Sweden)

    Eunice Tranquilino-Rodriguez

    2017-02-01

    Full Text Available Background: Saccharomycesboulardiiis a probiotic clinically effective inthe prevention and treatment of antibiotic induced diarrheain both children and adults, Clostridium difficile infections, inflammatory bowel disease, and other gastrointestinal disorders. However, the microorganisms need to survive the gastrointestinal transit and arrive to their action site alive in order to exert their beneficial effects. Microencapsulation is an alternative to improve the viability of probiotic in foods which can also survive in the gastrointestinal conditions. Freeze--drying is a method of dehydration that does not affect nutrients and bioactive compounds,such as probiotics contained in foods.All of them will increase the survival rate of S.boulardii.Purpose of this study:This study focused on formulae freeze-dried yogurt containing inulin, vegetable palm oil,and S.boulardii, both asfree cells and in microencapsulated form.Also,the effect of ampicillin associated S.boulardii. Methods. Yogurts were given to an “in vivo” digestion process, using male Wistar rats.The survival of S. boulardiiwas subsequently evaluated in colon and feces.For this study, six treatmentsof four of rats were used:i control rats ii rats fed with yogurt containing S. boulardiias free cells, iii rats fed with yogurt containing S. boulardiiinmicro-encapsulated form, iv control rats fed with penicillin,v rats fed with ampicillin plus yogurtcontaining S. boulardiias free cells, and vi rats fed with penicillin plus yogurt containing S. boulardiiin micro-encapsulated form. Results:The study demonstrated it was feasible to freeze-drythe S. boulardiiand incorporate it into a yogurtmade with skim milk,inulin, and unsaturated vegetable oil.The freeze-drying process not affected thesurvival of the S. boulardii(p<0.05. Microencapsulation increased the survival of S. boulardii on 1.77-Log CFU/g, and the presence of S. boulardii was only detected in colon and fecesof those rats which

  18. CASTOR {sup ®} and CONSTOR {sup ®}. A well established system for the dry storage of spent fuel and high level waste

    Energy Technology Data Exchange (ETDEWEB)

    Wimmer, Hannes; Skrzyppek, Juergen; Koebl, Michael [GNS Gesellschaft fuer Nuklear-Service mbH, Essen (Germany)

    2015-06-01

    The German company GNS Gesellschaft fuer Nuklear-Service mbH today looks back on more than 30 years of operational experience with dual-purpose casks for the transport and storage of spent nuclear fuel (SNF) from nuclear power plants and high level waste (HLW) from reprocessing. Following customer demands, GNS developed two different cask types for SNF. By now, almost 1,300 GNS-casks are in operation worldwide. This article gives an overview over several national and international projects and shows the bandwidth of customised solutions by GNS.

  19. Development of a probabilistic safety assessment framework for an interim dry storage facility subjected to an aircraft crash using best-estimate structural analysis

    Energy Technology Data Exchange (ETDEWEB)

    Almomani, Belal; Jang, Dong Chan [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Lee, Sang Hoon [Dept. of Mechanical and Automotive Engineering, Keimyung University, Daegu (Korea, Republic of); Kang, Hyun Gook [Dept. of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy (United States)

    2017-03-15

    Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose–risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research.

  20. Simplified model of the thermal evolution of the fuel dry storage; Modelo simplificado de la evolucion termica del combustible en almacenamiento en seco

    Energy Technology Data Exchange (ETDEWEB)

    Penalva, J.; Feria, F.; Herranz, L. E.

    2013-07-01

    The objective of this work is to establish a model that allows to determine easily temperature of the fuel burned and time out of reactor. The model will depend on the selected storage system, but the established methodology lays the groundwork for your application to any other case. to obtain the temperature has been used the FLUENT code, based on a model 3D itself and in the heat of decay at different burn (30-60 MWd/kgU) calculated with origin (information available in the literature). Of the different simulations carried out has developed a 3D map of temperature versus burned and time out of reactor, which has allowed to develop an equation simplified.

  1. Spent fuel dry storage technology development: thermal evaluation of isolated drywells containing spent fuel (1 kW PWR spent fuel assembly)

    Energy Technology Data Exchange (ETDEWEB)

    Unterzuber, R; Wright, J B

    1980-09-01

    A spent fuel Isolated Drywell Test was conducted at the Engine-Maintenance, Assembly and Disassembly (E-MAD) facility on the Nevada Test Site. Two PWR spent fuel assemblies having a decay heat level of approximately 1.1 kW were encapsulated inside the E-MAD Hot Bay and placed in instrumented near-surface drywell storage cells. Temperatures from the two isolated drywells and the adjacent soil have been recorded throughout the 19 month Isolated Drywell Test. Canister and drywell liner temperatures reached their peak values (254{sup 0}F and 203{sup 0}F, respectively) during August 1979. Thereafter, all temperatures decreased and showed a cycling pattern which responded to seasonal atmospheric temperature changes. A computer model was utilized to predict the thermal response of the drywell. Computer predictions of the drywell temperatures and the temperatures of the surrounding soil are presented and show good agreement with the test data.

  2. Effects of food gums on volatile flavor compounds of dried duck meat slice during storage%食用胶对鸭肉脯保藏期间挥发性风味物质变化的研究

    Institute of Scientific and Technical Information of China (English)

    王武; 任志伟; 张静; 吴巧

    2012-01-01

    Along with the extending of storage time, the volatile flavor compounds of dried duck meat slice will disappear gradually and causes poor quality of dried duck meat slice. Therefore, maintaining the stability of the volatile flavor substances is discussed in this papeT. The effects of Xanthan gum, Carrageenan, Arabic gum, Konjac gum on the quality changes were studied. HS - SPEM - GC - MS was appllied to extract and analyze the volatile flavor compounds in dried duck meat during the storage. The study showed that food gums could slow down the volatile speed of the flavor and retained flavor component nonanal and estragole better. Thus, stability of the volatile flavor was kept and shelf life of the products was extended.%随着保藏时间的延长鸭肉脯中的挥发性风味物质会逐渐挥发,造成鸭肉脯的风味减淡,影响鸭肉脯的品质,因此在加工的过程中需要采取措施以保持鸭肉脯在保藏过程中的挥发性风味物质的稳定性,以鸭肉为原料,研究了鸭肉脯在加工过程中添加黄原胶、卡拉胶、阿拉伯胶和魔芋胶对鸭肉脯保藏期间挥发性风味物质变化规律的影响.采用顶空固相微萃取技术和气相色谱质谱联用检测方( HS - SPEM - GC - MS)对鸭肉脯的挥发性风味物质进行萃取和检测,研究结果表明,添加食用胶后可以减缓鸭肉脯挥发性风味物质总含量的挥发速度,有效的保持了鸭肉脯的挥发性风味物质,同时添加食用胶对鸭肉脯中主要挥发性风味物质中的壬醛、草蒿脑等起到较好的保持作用,从而有利于延长鸭肉脯的保藏时间风味稳定性.

  3. 益生菌冻干保护剂优化及菌粉保存稳定性研究%Optimization of cryoprotectants and stability of freeze-dried probiotics during storage

    Institute of Scientific and Technical Information of China (English)

    田芬; 陈俊亮; 霍贵成

    2012-01-01

    以嗜酸乳杆菌KLDS AD1和KLDS AD2和双歧杆菌KLDS 2.0604为研究对象,研究冻干保护剂脱脂乳、蔗糖、海藻糖、葡聚糖和Vc钠盐对各菌株冻干存活率的影响,通过单因素、正交实验筛选出优化组合,得出冻干存活率均在87.81%以上。并研究采用优化后的冻干保护剂制备的各菌粉在4℃和25℃下的保存稳定性。保存稳定性实验表明:3株益生菌菌粉在4℃和25℃下保存12个月后,菌粉的活菌数最多下降2个数量级,其活菌数均在1.0×108cfu/g以上。%This paper regards two L.acidophilus of KLDS AD1 and KLDS AD2 and one Bifidobacterium of KLDS 2.0604 as research subjects, assessing the impact of cryoprotectants skim milk, saccharose, trehalose, dextran and Vc sodium salt on the survival rate of each freeze-dried probiotic powder during storage. The optimal combination gained from single factors and orthogonal experiments demonstrates that the freeze-dried survival rates of three strains are all above 87.81%. It also assesses the stability of each probiotic powder made of cryoprotectants after optimization during storage under 4 % and 25 ℃. The stability dates suggests that the viable cell counts of three probiotic powder are all above 1.0×10^8cfu/g after 12 months' storage under 4 % and 25℃, and viable cell counts of probiotic powder declines 2 order of magnitude at maximum

  4. Understanding the Risk of Chloride Induced Stress Corrosion Cracking of Interim Storage Containers for the Dry Storage of Spent Nuclear Fuel: Evolution of Brine Chemistry on the Container Surface.

    Energy Technology Data Exchange (ETDEWEB)

    Enos, David; Bryan, Charles R.

    2015-10-01

    Although the susceptibility of austenitic stainless steels to chloride-induced stress corrosion cracking is well known, uncertainties exist in terms of the environmental conditions that exist on the surface of the storage containers. While a diversity of salts is present in atmospheric aerosols, many of these are not stable when placed onto a heated surface. Given that the surface temperature of any container storing spent nuclear fuel will be well above ambient, it is likely that salts deposited on its surface may decompose or degas. To characterize this effect, relevant single and multi-salt mixtures are being evaluated as a function of temperature and relative humidity to establish the rates of degassing, as well as the likely final salt and brine chemistries that will remain on the canister surface.

  5. 膨化干燥灰枣粉玻璃化转变及贮藏稳定性%Glass transition and storage stability for explosion puffing dried jujube powder

    Institute of Scientific and Technical Information of China (English)

    毕延娣; 陈芹芹; 毕金峰; 颜廷才; 吴昕烨; 赵悦

    2015-01-01

    glass state is often considered to be stable, and the glass transition temperature has become an important predictor of food quality. With the deep understanding of water activity and glass transition theory, more and more scholars had combined these 2 theories together to predict the stability of food storage. In order to investigate the suitable storage condition of explosion puffing dried jujube (Zizyphus jujube cv. Huizao)powder, moisture sorption isotherm and glass transition temperature were determined at 25°C by the gravimetric method and differential scanning calorimetry, respectively. Three water sorption models and Gordon-Taylor equation were used to fit the moisture sorption isotherms and the glass transition temperaturedata, respectively. The state diagram of jujube powder was developed using the fitted moisture sorption isotherm and glass transition temperature curve to determine the suitable storage condition. Results showed that the equilibrium moisture content of explosion puffing dried jujube powder increased with the increasing of water activity, and the equilibrium moisture content (dry basis) was increased from 0.06 to 0.76 g/g as water activity increased from 0.113 to 0.902. The sorption behavior displayed “J” type isotherms, which may be due to the high sugar content of jujube powder. The best model to describe the moisture sorption isotherm characteristics of jujube powder was GAB model (R2=0.9968). The fitting curve indicated great fitting effect. The glass transition temperature was decreased with the increasing of moisture content, and the glass transition temperaturewas decreased from 29.90 to -35.02℃ as moisture content (wet basis) of jujube powder was increased from 0.064 to 0.175 g/g. The Gordon-Taylor equation was used to fit the glass transition temperature nonlinearly, and the correlation coefficient (R2) was 0.9912, which revealed good fitness. When dry basis moisture content was at or below 0.1223 g/g, and the temperature was at

  6. Dry Transfer Systems for Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Brett W. Carlsen; Michaele BradyRaap

    2012-05-01

    The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

  7. Study of the reorienting of hydrides in pods of nuclear fuel in storage in dry conditions It has been reproduced in the laboratory reorientation of hydrides in pods; Estudio de la reorientacion de hidroduros en vainas de combustible nuclear en condiciones de almacenamiento en seco

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Hervias, J.; Martin-Rengel, M. A.; Gomez, F. J.

    2012-07-01

    As a starting point, samples were taken at different concentrations of hydrogen, 150, 500 and 1200 ppm. Hydrogen therein was precipitated as hydrides homogeneously distributed in circumferential cross section of the cladding. These samples were subjected to thermomechanical processes representative of dry storage.

  8. Anatomical basis of LMA variations drive to different photosynthetic and water storage strategies in two Sesleria species from mountain dry grasslands

    Science.gov (United States)

    Puglielli, Giacomo; Fiore Crescente, Maria; Frattaroli, Anna Rita; Gratani, Loretta

    2016-04-01

    -0.8, respectively). This could be justified by the stronger control of water losses in S2 through a reduction of CO2 diffusion due to the increase in LT and LTD, attested by 6% and 30% lower sub stomatal CO2 concentration (Ci) and stomatal conductance (gs) compared to S1. By analyzing variations in LMA components we demonstrated that S. nitida maximizes carbon uptake mainly by LTD reduction while S. juncifolia reduces photosynthetic capacity and maximize water storage by increasing both LTD and LT. The analysis of the components for LMA provide better insight on uptake and storage strategies of resources such as CO2 and water by allowing the analysis of the relationship between physiological processes, leaf anatomy and environmental conditions.

  9. Grains storage using a field technique

    Directory of Open Access Journals (Sweden)

    Gourgue, H.

    1987-01-01

    Full Text Available Maize or other grains can be protected from insects during storage by filling empty drums, and adding a few handfuls of dry laterite soil. The tap is then rescrewed. The drum is ready for storage.

  10. Composição química de sementes de azevém em resposta ao retardamento da secagem e ao armazenamento Chemical composition of ryegrass seeds in response to drying delay and storage

    Directory of Open Access Journals (Sweden)

    Luiz Eichelberger

    2002-05-01

    Full Text Available O objetivo deste trabalho foi avaliar as alterações na composição química de sementes de azevém anual (Lolium multiflorum Lam., cultivar Comum-RS, em resposta ao retardamento da secagem (0, 6, 12, 18, 24, 36 e 48 horas e ao armazenamento (zero, quatro e oito meses, e correlacionar tais alterações com a qualidade fisiológica. A secagem foi retardada por meio do acondicionamento das sementes em caixas de poliestireno, contendo cada uma 24 kg de sementes, e realizada sobre piso de concreto, à sombra, por 12 horas, completando-a em estufa com circulação de ar. O retardamento da secagem por até 14 horas não comprometeu a qualidade fisiológica das sementes. Quando as sementes foram armazenadas por quatro e oito meses, os teores de proteína solúvel apresentaram correlação positiva com a germinação. A qualidade fisiológica das sementes correlacionou-se de forma negativa com o teor de aminoácidos e positiva com o teor de açúcares solúveis. O retardamento da secagem aumentou o teor de aminoácidos e reduziu açúcares solúveis, amido solúvel, proteína solúvel e peso de mil sementes. Durante o armazenamento houve aumento dos teores de aminoácidos, amido solúvel e proteína solúvel, e a redução de açúcares solúveis e peso de mil sementes.The objective of this experiment was to evaluate changes in the chemical composition of annual ryegrass (Lolium multiflorum Lam., cv. Comum-RS, seeds, in response to drying delay (0, 6, 12, 18, 24, 36 e 48 hours and storage (zero, four and eight months and to correlate these changes with physiological quality. Drying was delayed by conditioning seeds in polystyrene boxes, containing 24 kg of seeds each one, and was done on a shadowy concrete floor for 12 hours, being completed in an oven with circulation of forced air. Drying delay up to 14 hours did not compromise physiological quality of seeds. When seeds were stored for four and eight months, contents of soluble protein showed

  11. Spent-fuel-storage alternatives

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The Spent Fuel Storage Alternatives meeting was a technical forum in which 37 experts from 12 states discussed storage alternatives that are available or are under development. The subject matter was divided into the following five areas: techniques for increasing fuel storage density; dry storage of spent fuel; fuel characterization and conditioning; fuel storage operating experience; and storage and transport economics. Nineteen of the 21 papers which were presented at this meeting are included in this Proceedings. These have been abstracted and indexed. (ATT)

  12. Spent-fuel-storage alternatives

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The Spent Fuel Storage Alternatives meeting was a technical forum in which 37 experts from 12 states discussed storage alternatives that are available or are under development. The subject matter was divided into the following five areas: techniques for increasing fuel storage density; dry storage of spent fuel; fuel characterization and conditioning; fuel storage operating experience; and storage and transport economics. Nineteen of the 21 papers which were presented at this meeting are included in this Proceedings. These have been abstracted and indexed. (ATT)

  13. Energy Storage.

    Science.gov (United States)

    Eaton, William W.

    Described are technological considerations affecting storage of energy, particularly electrical energy. The background and present status of energy storage by batteries, water storage, compressed air storage, flywheels, magnetic storage, hydrogen storage, and thermal storage are discussed followed by a review of development trends. Included are…

  14. Electrohydrodynamic drying of carrot slices.

    Directory of Open Access Journals (Sweden)

    Changjiang Ding

    Full Text Available Carrots have one of the highest levels of carotene, and they are rich in vitamins, fiber and minerals. However, since fresh carrots wilt rapidly after harvest under inappropriate storage conditions, drying has been used to improve their shelf life and retain nutritional quality. Therefore, to further investigate the potential of this method, carrot slices were dried in an EHD system in order to study the effect of different voltages on drying rate. As measures of quality, carotene content and rehydration ratio were, respectively, compared against the conventional oven drying regime. Carotene, the main component of the dried carrot, and rehydration characteristics of the dried product can both indicate quality by physical and chemical changes during the drying process. Mathematical modeling and simulation of drying curves were also performed, using root mean square error, reduced mean square of the deviation and modeling efficiency as the primary criteria to select the equation that best accounts for the variation in the drying curves of the dried samples. Theoretically, the Page model was best suited for describing the drying rate curve of carrot slices at 10kV to 30kV. Experimentally, the drying rate of carrots was notably greater in the EHD system when compared to control, and quality, as determined by carotene content and rehydration ratio, was also improved when compared to oven drying. Therefore, this work presents a facile and effective strategy for experimentally and theoretically determining the drying properties of carrots, and, as a result, it provides deeper insight into the industrial potential of the EHD drying technique.

  15. Estimates of power deposited via cesium/barium beta and gamma radiation captured in components of a Hanford cesium chloride capsule and by components of overpacked capsules placed in an interim dry storage facility

    Energy Technology Data Exchange (ETDEWEB)

    Roetman, V.E., Westinghouse Hanford

    1996-12-23

    The deposition of power in Hanford cesium chloride capsules and in the components of design concepts for overpacking and interim storage were determined as requested (Randklev, 1996a). The power deposition results from the selective capture of gamma and beta radiation coming from the decay of the 137CS isotope in the CsCl contained in the capsules. The following three cases were analyzed: (a) a single CsCl capsule, (b) an overpack containing eight CsCl capsules, and (c) an infinite square array of such overpacks as placed in tubes of a interim dry storage facility. The power deposition was expressed as watts per gram for each of the respective physical design components in these three cases. Per the analyses request and guidance (Randklev 1996a), the primary analysis objective was to characterize, for each case, the power deposition across the radial cross-section at the expected axial position of maximum deposition. As requested, this primary part of the analysis work was done using choices for component dimension and material properties that would reasonably characterize the maximum deposition profile across the salt (CsCl) and the inner capsule barrier of the double walled metal capsule system used to construct the Hanford capsules. The secondary objective was to further evaluate the deposition behavior relative to the influence of axial position. The guidance (Randklev 1996a) also requested 1797 an analysis case that involved a lag-storage pit in a hot-cell, in which a cylindrical metal basket from a transportation cask would be used to position several capsules in the lag-storage pit. Although the basic model for the lag storage concept evaluation was essentially completed by the end of FY-96, the analysis was not run because of the need to prioritize and limit the work scope due to funding limitations for FY-97. The specific purpose for performing the subject set of analyses (Randklev 1996a) is to obtain power deposition values (i.e., per the decay of T37cs

  16. In-line near infrared spectroscopy during freeze-drying as a tool to measure efficiency of hydrogen bond formation between protein and sugar, predictive of protein storage stability

    NARCIS (Netherlands)

    Mensink, Maarten A; Van Bockstal, Pieter-Jan; Pieters, Sigrid; De Meyer, Laurens; Frijlink, Henderik W; van der Voort Maarschalk, Kees; Hinrichs, Wouter L J; De Beer, Thomas

    2015-01-01

    Sugars are often used as stabilizers of protein formulations during freeze-drying. However, not all sugars are equally suitable for this purpose. Using in-line near-infrared spectroscopy during freeze-drying, it is shown here that hydrogen bond formation during freeze-drying, under secondary drying

  17. 发酵香肠在自然风干存贮过程中的理化指标变化%Physicochemical Properties Changes of Fermented Sausage during Natural Air Drying and Storage Process

    Institute of Scientific and Technical Information of China (English)

    权美平

    2013-01-01

    Take fresh pork as raw material,make sausage with traditional Chinese-style method and detect the changes of different physicochemical indexes of finished sausage at regular intervals.The results show that:with the time extends,the moisture content,pH value,red value reduce gradually and fat content increases gradually.In addition,the acid value,POV value and TBA value caused by oxidation hydrolysis of fat increase gradually.The variation trends of test indexes indicate that natural air drying and storage do not help to the quality advance of sausage and the improvement measures should be adopted.%以猪肉为原料,采用传统中式方法制作香肠,定期检测成品香肠中各项理化指标的变化情况.结果表明:随着时间的延长,水分含量、pH值、红值逐渐降低;脂肪含量逐渐升高,脂肪的氧化水解导致的酸价、POV值、TBA值也逐渐增大.检测指标的变化趋势表明:自然风干存贮不利于香肠品质的提升,应设法加以改进.

  18. Dry Etching

    DEFF Research Database (Denmark)

    Stamate, Eugen; Yeom, Geun Young

    2016-01-01

    Production of large-area flat panel displays (FPDs) involves several pattern transfer and device fabrication steps that can be performed with dry etching technologies. Even though the dry etching using capacitively coupled plasma is generally used to maintain high etch uniformity, due to the need...... for the higher processing rates in FPDs, high-density plasma processing tools that can handle larger-area substrate uniformly are more intensively studied especially for the dry etching of polysilicon thin films. In the case of FPD processing, the current substrate size ranges from 730 × 920 mm (fourth...... generation) to 2,200 × 2,500 mm (eighth generation), and the substrate size is expected to increase further within a few years. This chapter aims to present relevant details on dry etching including the phenomenology, materials to be etched with the different recipes, plasma sources fulfilling the dry...

  19. Armazenamento de sementes de feijão revestidas com polímeros e tratadas com fungicidas Storage of dry bean seeds coated with polymers and treated with fungicides

    Directory of Open Access Journals (Sweden)

    Larissa Leandro Pires

    2004-07-01

    Full Text Available O revestimento com polímeros, associado ao tratamento químico de sementes, vem sendo utilizado em culturas com o propósito de fixar produtos químicos. O objetivo do trabalho foi avaliar o efeito do armazenamento na qualidade de sementes de feijão (Phaseolus vulgaris L. revestidas com polímeros e tratadas com diferentes fungicidas. As sementes foram inoculadas por imersão a vácuo, em suspensão de inóculo de Colletotrichum lindemuthianum (5x10(5 conídios/mL, fungo-teste utilizado. Os fungicidas benomyl, carbendazin e captan, nas formulações pó molhável, suspensão concentrada e pó seco, respectivamente, foram aplicados prévia ou concomitantemente à aplicação de uma mistura de dois polímeros à base de tintas de polímeros vinílicos fosca e brilhante. Apesar de a velocidade de germinação das sementes de feijão revestidas e tratadas ter sido reduzida, a porcentagem de germinação não foi afetada negativamente pelo revestimento com os polímeros testados. O revestimento com polímeros não prejudicou a eficiência dos fungicidas testados no controle de fungos em geral, sob nenhuma das duas formas de aplicação, ao longo dos quatro meses de armazenamento. O revestimento com estes polímeros pode afetar a eficiência de controle de patógenos nestas sementes, positiva ou negativamente, dependendo do fungicida utilizado e de sua forma de aplicação e dependendo do patógeno presente nas sementes.Coating seeds with polymers associated with chemicals is used to promote a better fixation of seed treatment products, and therefore minimizing toxic hazards. The objective of this work was to verify the effect of four-month storage on quality of dry bean (Phaseolus vulgaris L. seed coated with polymers, and treated with fungicides. Bean seeds were inoculated by immersion in a suspension of Colletotrichum lindemuthianum (5x10(5 conidia/mL, applied under vacuum. After the inoculation, seeds were treated with different types of

  20. Blanching and drying period affect moisture loss and vitamin C ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-09-03

    Sep 3, 2008 ... Key words: Pre-storage treatment, drying duration, colour chroma, fruit darkening, quality attributes. ... can be intermittent or irregular and the rate of drying is generally low and this ..... Renewable Energy 15: 95-100. Kadzere I ...

  1. Spalling Resistance Fast-drying Refractory Castables

    Institute of Scientific and Technical Information of China (English)

    Wang Jing; Peng Xigao

    2010-01-01

    @@ 1 Scope This standard specifies the term and definition,classification, technical requirements, test methods,quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of spalling resistance fast-drying refractory castables.

  2. Dry release of suspended nanostructures

    DEFF Research Database (Denmark)

    Forsén, Esko Sebastian; Davis, Zachary James; Dong, M.;

    2004-01-01

    A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer of photo......A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer......, the technique enables long time storage and transportation of produced devices without the risk of stiction. By combining the dry release method with a plasma deposited anti-stiction coating both fabrication induced stiction, which is mainly caused by capillary forces originating from the dehydration...

  3. century drying

    Science.gov (United States)

    Cook, Benjamin I.; Smerdon, Jason E.; Seager, Richard; Coats, Sloan

    2014-11-01

    Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twenty-first century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman-Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both

  4. Efecto del método de secado en la longevidad y calidad de las semillas de Bauhinia purpurea.: II. Almacenamiento en cámara fría Effect of drying method on the longevity and quality of seeds from Bauhinia purpurea.: II. Storage in cold-storage room

    Directory of Open Access Journals (Sweden)

    Marlen Navarro

    2008-03-01

    Full Text Available Se estudió la influencia combinada de los métodos de secado, las condiciones de almacenamiento y la edad fisiológica de las semillas de Bauhinia purpurea, en su capacidad germinativa y calidad. Los tratamientos para el secado fueron: A en las legumbres; B artificial; y C al sol. Se determinó el contenido de humedad (CH, la germinación y la viabilidad de las semillas durante los 12 meses de almacenamiento en cámara fría. Para el procesamiento de la información se emplearon análisis multivariados. En A el mayor valor de la capacidad germinativa (98,67% se observó en la primera evaluación, al igual que en B (100%, donde las diferencias entre los meses fueron mínimas en todo el estudio. En C la capacidad germinativa fue de 79,33% a los 12 meses, lo que representó un aumento cuantitativo de la longevidad de las semillas con respecto a A. El proceso germinativo en A, entre 0 y 9 meses de almacenamiento, se completó a los 9 días de iniciada la prueba, mientras que en el resto de las evaluaciones ocurrió a los 6 días. Entre las simientes de B y C se observó un comportamiento semejante, con la diferencia de que el potencial germinativo se logró expresar a los 6 días en B a 0 y 2 meses; en C a 0, 1, 2 y 11 meses; mientras que en B la germinación se inició a los 6 días para 9 y 10 meses. Se concluye que a las semillas de bauhinia se les puede aplicar los tratamientos ensayados en este trabajo, aunque los mejores resultados se obtuvieron al utilizar silicagel (B.The combined influence of different drying methods, the storage conditions and the physiological age of seeds from Bauhinia purpurea, on their germinative capacity and quality was determined. The treatments for drying were: A in the pods; B artificial; and C under sunlight. The moisture content (MC, germination and viability of the seeds were determined during the 12 months of storage in the cold-storage room. For the information processing multivariate analyses were used. In

  5. 不同处理方式对牛干巴贮藏期品质的影响%Effects of different treatments on the quality of dry-cured beef during storage period

    Institute of Scientific and Technical Information of China (English)

    胡凯弟; 甘芳瑗; 刘书亮; 王成; 何利; 陈姝娟

    2015-01-01

    为延长干巴牛肉货架期,文中分别采用热力、化学、热力结合化学与超高压4种方式处理干巴牛肉,以真空包装干巴牛肉为对照,于37℃保温贮藏35天,通过对其理化、微生物及感官指标进行测定,分析其在贮藏过程中品质变化规律;结果显示:热力处理组干巴牛肉品质变化较小,微生物数量减少速度较快,35天后酸价(AV)和总挥发性盐基氮(TVBN)较低;化学处理组35天后亚硝酸盐含量较其他处理组低,为0.7 mg/kg,但AV和TVBN值偏高,为1.83 mg/g和59.6 mg/kg,对细菌和酵母菌抑制效果较差;热力结合化学处理组亚硝酸盐含量较低,AV和TVBN值均最低,为1.50 mg/g和52.5 mg/kg,与热力处理组感官评分接近,微生物减少较热力组快;超高压处理组杀菌效果较好,但色泽较差.对照组35天后亚硝酸盐含量、AV、TVBN值和微生物数量均高于各处理组.4个处理组在整个贮藏过程中亚硝酸盐含量、细菌总数与酵母菌数均下降,亚硝酸盐含量均低于1.5mg/kg,远低于国家标准30 mg/kg,且无过氧化值、霉菌检出.热力结合化学组为最优处理组.%To prolong the shelf life of dry-cured beef.Different inhibition or sterilization methods including thermal,chemical,thermal cooperated with chemical and ultra-high pressure were used in dry-cured beef,respectively.The variation of quality during storage period (35 days,37 ℃) were analyzed on physical,chemical,microbiological and sensory indexes,and vacuum-packed product was used as a control.The sensory qualities of thermal-treated group changed slightly,and the amount of microorganisms decreased faster,both of acid value (AV) and total volatile basic nitrogen (TVBN) were lower after 35 days in that group;at the end of storage period,the nitrite content of chemical group was lower than others,as 0.7 mg/kg,but its AV and TVBN were higher at 1.83 mg/g and 59.6 mg/kg respectively,with poor inhibition effect on bacteria and yeast

  6. Dry cell battery poisoning

    Science.gov (United States)

    Batteries - dry cell ... Acidic dry cell batteries contain: Manganese dioxide Ammonium chloride Alkaline dry cell batteries contain: Sodium hydroxide Potassium hydroxide Lithium dioxide dry cell batteries ...

  7. Cold vacuum drying facility 90% design review

    Energy Technology Data Exchange (ETDEWEB)

    O`Neill, C.T.

    1997-05-02

    This document contains review comment records for the CVDF 90% design review. Spent fuels retrieved from the K Basins will be dried at the CVDF. It has also been recommended that the Multi-Conister Overpacks be welded, inspected, and repaired at the CVD Facility before transport to dry storage.

  8. Dry Mouth

    Science.gov (United States)

    ... Use a fluoride rinse or brush-on fluoride gel before bedtime. See your dentist at least twice yearly to have your teeth examined and plaque removed, to help prevent tooth decay. Several herbal remedies have been used historically to treat dry ...

  9. 牧草种子热泵辅助型太阳能储热干燥设备设计与试验%Design and Experiment of Heat Pump Assisted Solar Energy Heat-storage Drying Equipment for Herbage Seed

    Institute of Scientific and Technical Information of China (English)

    王全喜; 王德成; 杜建强; 翟改霞

    2012-01-01

    Aiming at herbage seed drying equipment problems of power consumption, air discharge and solar energy application, a drying mode was proposed. Basis heating was supplied by thermal-stored solar energy, and air charge was dehumidified and reused by heat pump. Main working parts, such as thermal collector, thermal storage and heat pump, and whole drying machine were designed. Using movable design idea, thermal collector was controllable and whole machine was placed safely. Performance test results showed that handling capacity reached to 161 kg/h, power handling capacity achieved to 8. 4 kg/ ( kW · h) , the drying capacity reached to 3 367 kg · % /h, and dry strength achieved to 6. 7 kg/ ( m3 · h). The power consumption ration of solar PCM heat-storage drying, solar energy and heat pump teamwork drying, heat-pump drying and electricity power drying was 0. 9:1.0:1.2:1. 5.%针对牧草种子干燥设备在能耗、排放和太阳能使用等方面存在的问题,提出了太阳能储热供热为主,尾气由热泵除湿后回收使用为辅的节能零排放干燥模式,完成了集热、储热和热泵等主要工作部件以及整机的结构设计,用移动式设计实现了太阳能集热可控和整机安全贮存.试验结果表明:处理量161 kg/h,度电处理量8.4 kg/(kW·h),干燥能力3 367 kg·%/h,干燥强度6.7 kg/(m3 ·h);太阳能相变储热干燥、太阳能一热泵联合干燥、热泵干燥和电加热干燥4种供热干燥模式的耗电量之比是0.9:1.0:1.2:1.5.

  10. Annotated Bibliography for Drying Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Rebecca E. Smith

    2011-09-01

    Internationally, the nuclear industry is represented by both commercial utilities and research institutions. Over the past two decades many of these entities have had to relocate inventories of spent nuclear fuel from underwater storage to dry storage. These efforts were primarily prompted by two factors: insufficient storage capacity (potentially precipitated by an open-ended nuclear fuel cycle) or deteriorating quality of existing underwater facilities. The intent of developing this bibliography is to assess what issues associated with fuel drying have been identified, to consider where concerns have been satisfactorily addressed, and to recommend where additional research would offer the most value to the commercial industry and the U. S. Department of Energy.

  11. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: ... your eyes do not produce enough tears, it is called dry eye. Dry eye is also when ...

  12. Study of the oxidation of the matrix of irradiated fuel under conditions of dry storage; Estudio de la oxidacion de la matriz del combustible irradiado en condiciones de almacenamiento en seco

    Energy Technology Data Exchange (ETDEWEB)

    Elorrieta, J. M.; Bonales, L. J.; Rodriguez, N.; Gutierrez, L.; Cobos, J.; Baonza, V. G.

    2014-07-01

    Spain holds the open cycle for the management of spent fuel of nuclear power stations. The solution adopted, given the urgent need for greater storage capacity, has been the construction of a centralized temporary storage, with an expected 100-year life, which will be stored from 2017 both spent fuel from nuclear power plants and other waste high activity of NPPs. (Author)

  13. Improved shelf life of dried Beauveria bassiana blastospores using convective drying and active packaging processes.

    Science.gov (United States)

    Mascarin, Gabriel Moura; Jackson, Mark A; Behle, Robert W; Kobori, Nilce N; Júnior, Ítalo Delalibera

    2016-10-01

    The yeast form (blastospore) of the dimorphic insect-pathogenic fungus Beauveria bassiana can be rapidly produced using liquid fermentation methods but is generally unable to survive rapid dehydration processes or storage under non-refrigerated conditions. In this study, we evaluated the influence of two convective drying methods, various modified atmosphere packaging systems, and storage temperatures on the desiccation tolerance, storage stability, and virulence of blastospores of B. bassiana ESALQ 1432. All blastospore formulations were dried to <5 % water content equivalent to aw < 0.3. The viability of B. bassiana blastospores after air drying and spray drying was greater than 80 %. Vacuum-packaged blastospores remained viable longer when stored at 4 °C compared with 28 °C with virtually no loss in viability over 9 months regardless the drying method. When both oxygen and moisture scavengers were added to sealed packages of dried blastospore formulations stored at 28 °C, viability was significantly prolonged for both air- and spray-dried blastospores. The addition of ascorbic acid during spray drying did not improve desiccation tolerance but enhanced cell stability (∼twofold higher half-life) when stored at 28 °C. After storage for 4 months at 28 °C, air-dried blastospores produced a lower LC80 and resulted in higher mortality to whitefly nymphs (Bemisia tabaci) when compared with spray-dried blastospores. These studies identified key storage conditions (low aw and oxygen availability) that improved blastospore storage stability at 28 °C and will facilitate the commercial development of blastospores-based bioinsecticides.

  14. Development of freeze dried vegetables

    Science.gov (United States)

    Larson, R. W.

    1970-01-01

    The development of freeze dried vegetables to be used in the Apollo food system is discussed. After the initial selection and screening of vegetables, several types of freeze dried vegetables were prepared in small batches. From these small batches, two vegetables were judged satisfactory for further testing and evaluation. These vegetables, mashed potatoes and asparagus, were subjected to storage at 100 deg plus or minus 5 F. for two weeks and then taste tested. The vegetables were also tested to determine if they complied with the microbiological requirements for Apollo food. The space food prototype production guide for the vegetables is submitted.

  15. Development of dry gram-negative bacteria biocontrol products and small pilot tests against dry rot

    Science.gov (United States)

    Pseudomonas fluorescens strains S11:P:12, P22:Y:05, and S22:T:04 suppress four important storage potato maladies; dry rot, late blight, pink rot, and sprouting. Studies were designed to identify methods for producing a dried, efficacious biological control product. The strains were evaluated individ...

  16. Recent advances in drying and dehydration of fruits and vegetables: a review

    OpenAIRE

    Sagar, V. R.; P Suresh Kumar

    2010-01-01

    Fruits and vegetables are dried to enhance storage stability, minimize packaging requirement and reduce transport weight. Preservation of fruits and vegetables through drying based on sun and solar drying techniques which cause poor quality and product contamination. Energy consumption and quality of dried products are critical parameters in the selection of drying process. An optimum drying system for the preparation of quality dehydrated products is cost effective as it shortens the drying ...

  17. Report on UQ and PCMM Analysis of Vacuum Drying for UFD S&T Gaps

    Energy Technology Data Exchange (ETDEWEB)

    Fluss, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-08-31

    This report discusses two phenomena that could affect the safety, licensing, transportation, storage, and disposition of the spent fuel storage casks and their contents (radial hydriding during drying and water retention after drying) associated with the drying of canisters for dry spent fuel storage. The report discusses modeling frameworks and evaluations that are, or have been, developed as a means to better understand these phenomena. Where applicable, the report also discusses data needs and procedures for monitoring or evaluating the condition of storage containers during and after drying. A recommendation for the manufacturing of a fully passivated fuel rod, resistant to oxidation and hydriding is outlined.

  18. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd ... your vision. Privacy Policy Related New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  19. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: Brenda Pagan- ...

  20. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? ...

  1. Influência do método e tempo de armazenamento de colmos de capim-cameroon no seu perfilhamento e produção de matéria seca Influence of method and storage time of stem fractions of cameroongrass on tillering and dry matter production

    Directory of Open Access Journals (Sweden)

    Benedito Marques da Costa

    2004-04-01

    Full Text Available O objetivo deste estudo foi conhecer as influências dos métodos e tempos de armazenamentos de frações de colmos do capim-Cameroon (Pennisetum purpureum Schum. cv. Cameroon no seu perfilhamento e produção de matéria seca, aos 70 dias após o plantio. O delineamento experimental foi em blocos casualizados, em esquema de parcelas divididas no tempo, com três repetições. Os métodos de armazenamento das frações de colmos foram: 1 amarradas em feixes; 2 amarradas em feixes e colocadas em sacos de polietileno com pequenos furos; 3 amarradas em feixes e colocadas em sacos de polietileno sem furos. Os tempos de armazenamento foram: 0, 5, 10, 15, 20, 25 e 30 dias. Verificou-se uma diferença entre os métodos de armazenamento das frações de colmos para número de perfilhos e para produção de matéria seca. O teor de umidade das frações de colmos foi afetado pelo método e pelo tempo de armazenamento. As frações de colmos de capim-cameroon podem ser armazenadas dentro de sacos de polietileno, perfurados ou não, durante 20 a 30 dias antes do plantio.The objective of this study was to evaluate the influence of methods and storage times of stem fractions upon tillering and dry matter production of Cameroongrass (Pennisetum purpureum cv. Cameroon at 70 days after planting. Its propagation was carried out by planting culm fractions, each one containing four nodes. A split plot experiment design by time with 3 replications was used. Sorage methods of the stem fractions were: 1 tied bundles; 2 tied bundles and kept in plastic bags with small holes; 3 tied bundles and kept in plastic bags without holes. The storage times were 0, 5, 10, 15, 20, 25 and 30 days. A difference among storage methods of stem fractions for number of tillers and for dry matter production was observed. The water contents of stem fractions were affected by the storage methods as well as the storage times. The stem fractions of Cameroongrass could be stored in plastic

  2. Application of Dried Blood Spots on Filter Paper for Detection of HIV ...

    African Journals Online (AJOL)

    Application of Dried Blood Spots on Filter Paper for Detection of HIV Antibodies: Effect of Temperature and Duration of Storage. ... This study aimed at evaluating the use of blood spot dried on filter paper (under different ... Article Metrics.

  3. Crystallization and X-ray diffraction of spray-dried and freeze-dried amorphous lactose.

    Science.gov (United States)

    Haque, Md Kamrul; Roos, Yrjö H

    2005-02-07

    Crystallization of spray-dried and freeze-dried amorphous lactose over different relative vapor pressures (RVP) and storage times was studied. Crystallization was observed from increasing peak intensities in X-ray diffraction patterns. Lactose was crystallized in the samples stored at RVP of 44.1% and above in both types of dehydrated powders. The rate of crystallization increased with increasing RVP and storage time. Similar crystallization behavior of both spray-dried and freeze-dried lactose was observed. Lactose crystallized as alpha-lactose monohydrate, anhydrous beta-lactose, and the anhydrous form of alpha- and beta-lactose in a molar ratio of 5:3 and 4:1 in both spray-dried and freeze-dried forms. Peak intensities of X-ray diffraction patterns for anhydrous beta-lactose were decreased, and for alpha-lactose monohydrate increased with increasing storage RVP and time. The crystallization data were successfully modeled using Avrami equation at RVP of 54.5% and above. The crystallization data obtained is helpful in understanding and predicting storage stability of lactose-containing food and pharmaceutical products.

  4. Energy storage

    CERN Document Server

    Brunet, Yves

    2013-01-01

    Energy storage examines different applications such as electric power generation, transmission and distribution systems, pulsed systems, transportation, buildings and mobile applications. For each of these applications, proper energy storage technologies are foreseen, with their advantages, disadvantages and limits. As electricity cannot be stored cheaply in large quantities, energy has to be stored in another form (chemical, thermal, electromagnetic, mechanical) and then converted back into electric power and/or energy using conversion systems. Most of the storage technologies are examined: b

  5. Used fuel extended storage security and safeguards by design roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, Samuel G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lindgren, Eric Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Robert [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Ketusky, Edward [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); England, Jeffrey [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Scherer, Carolynn [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sprinkle, James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Miller, Michael. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rauch, Eric [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scaglione, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dunn, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-05-01

    In the United States, spent nuclear fuel (SNF) is safely and securely stored in spent fuel pools and dry storage casks. The available capacity in spent fuel pools across the nuclear fleet has nearly reached a steady state value. The excess SNF continues to be loaded in dry storage casks. Fuel is expected to remain in dry storage for periods beyond the initial dry cask certification period of 20 years. Recent licensing renewals have approved an additional 40 years. This report identifies the current requirements and evaluation techniques associated with the safeguards and security of SNF dry cask storage. A set of knowledge gaps is identified in the current approaches. Finally, this roadmap identifies known knowledge gaps and provides a research path to deliver the tools and models needed to close the gaps and allow the optimization of the security and safeguards approaches for an interim spent fuel facility over the lifetime of the storage site.

  6. Coeficiente de digestibilidade verdadeira dos aminoácidos e valores de aminoácidos digestíveis do milho submetido a diferentes temperaturas de secagem e períodos de armazenamento True digestibility of amino acids and digestible amino acids values of corn samples submitted to different drying temperatures and storage periods

    Directory of Open Access Journals (Sweden)

    Débora Cristine de Oliveira Carvalho

    2009-05-01

    Full Text Available Determinou-se o coeficiente de digestibilidade verdadeira dos aminoácidos de amostras de milho submetidas a diferentes temperaturas de secagem (temperatura ambiente e secagem artificial a 80, 100 e 120°C e períodos de armazenamento (0, 60, 120 e 180 dias. A digestibilidade verdadeira dos aminoácidos foi determinada pelo método de "alimentação forçada" utilizando-se galos Leghorn adultos cecectomizados, alojados individualmente em baterias metálicas. Utilizou-se delineamento inteiramente casualizado em esquema fatorial 4 × 4 (quatro temperaturas de secagem e quatro períodos de armazenamento com um galo por unidade experimental e oito repetições por temperatura de secagem e período de armazenamento. As perdas endógenas foram determinadas com galos em jejum. O aumento da temperatura de secagem ocasionou redução linear da digestibilidade de metionina + cistina e isoleucina e efeito quadrático sobre a digestibilidade de metionina, treonina, lisina, triptofano e fenilalanina. Os maiores coeficientes de digestibilidade de metionina, treonina, lisina, triptofano e fenilalanina foram observados nas temperaturas 40, 25, 27, 32 e 40°C, respectivamente, obtidas por equação de regressão. Observou-se redução linear da digestibilidade de metionina e treonina com o tempo de armazenamento. A temperatura de secagem e o tempo de armazenamento dos grãos de milho reduzem a digestibilidade da maioria dos aminoácidos.The objective of this experiment was to determine the true digestibility (TD of amino acids from corn samples submitted to different drying temperatures (room temperature and artificial drying at 80, 100 and 120°C, and different storage periods (0, 60, 120 and 180 days. The TD of amino acids was determined by the forced feeding method using cecectomized adult Leghorn roosters, placed in individual cages. A 4 × 4 factorial arrangement was used (four drying temperatures and four storage periods, in a completely randomized design

  7. Bacteriology of Dried Meat (Kilishi) Hawked in Some Northern ...

    African Journals Online (AJOL)

    BSN

    This study is aimed at detecting the presence of bacterial pathogens in dried ... Although modern methods of meat preservation abound and ... Materials and methods. Sample .... processing, handling and storage or packaging of the product.

  8. Recent advances in drying and dehydration of fruits and vegetables: a review.

    Science.gov (United States)

    Sagar, V R; Suresh Kumar, P

    2010-01-01

    Fruits and vegetables are dried to enhance storage stability, minimize packaging requirement and reduce transport weight. Preservation of fruits and vegetables through drying based on sun and solar drying techniques which cause poor quality and product contamination. Energy consumption and quality of dried products are critical parameters in the selection of drying process. An optimum drying system for the preparation of quality dehydrated products is cost effective as it shortens the drying time and cause minimum damage to the product. To reduce the energy utilization and operational cost new dimensions came up in drying techniques. Among the technologies osmotic dehydration, vacuum drying, freeze drying, superheated steam drying, heat pump drying and spray drying have great scope for the production of quality dried products and powders.

  9. Probe Storage

    NARCIS (Netherlands)

    Gemelli, Marcellino; Abelmann, Leon; Engelen, Johan B.C.; Khatib, Mohammed G.; Koelmans, Wabe W.; Zaboronski, Olog; Campardo, Giovanni; Tiziani, Federico; Laculo, Massimo

    2011-01-01

    This chapter gives an overview of probe-based data storage research over the last three decades, encompassing all aspects of a probe recording system. Following the division found in all mechanically addressed storage systems, the different subsystems (media, read/write heads, positioning, data chan

  10. Atomic storage

    CERN Multimedia

    Ricadela, A

    2003-01-01

    IBM is supplying CERN, the European Organization for Nuclear Research, with its Storage Tank file system virtualization software, 20 terabytes of storage capacity, and services under a three-year deal to build computer systems that will support the Large Hadron Collider accelerator (1 paragraph).

  11. NGLW RCRA Storage Study

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Waters; R. Ochoa; K. D. Fritz; D. W. Craig

    2000-06-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) at the Idaho National Engineering and Environmental Laboratory contains radioactive liquid waste in underground storage tanks at the INTEC Tank Farm Facility (TFF). INTEC is currently treating the waste by evaporation to reduce the liquid volume for continued storage, and by calcination to reduce and convert the liquid to a dry waste form for long-term storage in calcine bins. Both treatment methods and activities in support of those treatment operations result in Newly Generated Liquid Waste (NGLW) being sent to TFF. The storage tanks in the TFF are underground, contained in concrete vaults with instrumentation, piping, transfer jets, and managed sumps in case of any liquid accumulation in the vault. The configuration of these tanks is such that Resource Conservation and Recovery Act (RCRA) regulations apply. The TFF tanks were assessed several years ago with respect to the RCRA regulations and they were found to be deficient. This study considers the configuration of the current tanks and the RCRA deficiencies identified for each. The study identifies four potential methods and proposes a means of correcting the deficiencies. The cost estimates included in the study account for construction cost; construction methods to minimize work exposure to chemical hazards, radioactive contamination, and ionizing radiation hazards; project logistics; and project schedule. The study also estimates the tank volumes benefit associated with each corrective action to support TFF liquid waste management planning.

  12. 77 FR 9591 - List of Approved Spent Fuel Storage Casks: HI-STORM 100, Revision 8

    Science.gov (United States)

    2012-02-17

    ... COMMISSION 10 CFR Part 72 RIN 3150-AJ05 List of Approved Spent Fuel Storage Casks: HI-STORM 100, Revision 8... the Holtec International HI-STORM 100 dry cask storage system listing within the ``List of Approved... other aspects of the HI-STORM 100 dry storage cask system. Because the NRC considers this...

  13. Acorn storage: Can you really fool Mother Nature?

    Science.gov (United States)

    Kristina Connor

    2009-01-01

    Moisture levels in acorns before storage are critical. Two years after being dried before storage, water oak (Quercus nigra) acorns had 17% to 25% germination, while cherrybark oak (Q. pagoda) acorns were dead. Acorns stored fully hydrated faired far better after 2 years in storage, with germination ranging from 48% to 53% in water...

  14. Production of dry Lactobacillus rhamnosus GG preparations by spray drying and lyophilization in aqueous two-phase systems

    Directory of Open Access Journals (Sweden)

    Katarzyna Leja

    2009-12-01

    Full Text Available Background. Drying is the oldest method of food preservation. It works by removing water from the food, which prevents the growth of microorganisms and decay. Moreover, spray or freeze drying is also used for the preservation of probiotic cultures. The aim of this study was to compare a survival rate of probiotic bacteria Lactobacillus rhamnosus during spray and freeze drying in ATPS. These results were also compared with survival rate of cells dried under the same conditions but suspended only in skim milk, 6% solution of PVP or 6% solution of dextran. Material and methods. The bacteria Lactobacillus rhamnosus GGwere suspended and spray or freeze dried in various types of aqueous two-phase emulsions: PVP/dextran, PEG4000/dextran and PEG8000/dextran. These emulsions consisted of different types of polymers and had varying ratio of polymers in dispersed (dextran and dispersing (PEG and PVP phases. Results. The research demonstrated that survival rate of bacteria directly after drying depended mainly on protective reagent, rather than on drying method. After 30-day-storage of the dried bacteria cell specimens, the highest survival rate was noted in case of freeze dried cells in milk. In case of spray drying the highest cell survival rate was observed when emulsion PVP3.6%/dextran2.4% was used as a drying medium. Conclusions. Finally, it has been found that cell survival rate was not strongly influenced by the storage temperature of the powder but it depended on the drying medium.  

  15. Formation of dry gram-negative bacteria biocontrol products and small pilot tests against potato dry rot

    Science.gov (United States)

    Pseudomonas fluorescens strains S11:P:12, P22:Y:05, and S22:T:04 reduce important potato maladies in storage including dry rot, late blight, pink rot, and sprouting. Experiments were conducted to identify methods for producing a dried, efficacious biological control product from one or more of these...

  16. Silo Storage Preconceptual Design

    Energy Technology Data Exchange (ETDEWEB)

    Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

    2012-09-01

    The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage option’s primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argon’s design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, “Silo Storage Concepts, Cathodic Protection Options Study” (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

  17. Efeito do armazenamento na compatibilidade de fungicidas e inseticidas, associados ou não a um polímero no tratamento de sementes de feijão Effect of the storage in the compatibility of fungicides and insecticides associated or not to a polymer in dry bean seed coating

    Directory of Open Access Journals (Sweden)

    Rosana Gonçalves Barros

    2005-01-01

    Full Text Available Estudou-se neste trabalho a compatibilidade de produtos químicos, associados a um polímero no tratamento de sementes de feijão, estabelecendo-se ainda, o período máximo de armazenamento. Sementes de feijão da cultivar Pérola foram submetidas aos seguintes tratamentos: 1 testemunha; 2 carbendazin + thiram + fipronil + polímero; 3 carbendazin + thiram + fipronil; 4 carbendazin + thiram + thiodicarb + polímero e 5 carbendazin + thiram + thiodicarb. Avaliaram-se emergência, eficiência no controle de lagarta elasmo (Elasmopalpus lignosellus e sanidade das sementes. Nos resultados dos parâmetros emergência e controle de elasmo, os tratamentos associados ao inseticida fipronil foram superiores aos demais; na sanidade das sementes, os tratamentos com o inseticida thiodicarb foram mais eficientes, indicando ser esse o inseticida mais compatível à mistura com os fungicidas carbendazin + thiram aos 150 dias de armazenamento. Os produtos testados podem ser utilizados no tratamento de sementes de feijão, e as sementes tratadas armazenadas por até 120 dias antes da semeadura.The compatibility of chemical products in dry bean seed coating associated to a polymer was studied in this work. Also, the maximum period of storage for these seeds coated with polymer and defensives was established. Dry beans, from cv. Pérola were submitted to the following treatments: 1 control; 2 carbendazin + thiram + fipronil + polymer; 3 carbendazin + thiram + fipronil; 4 carbendazin + thiram + thiodicarb + polymer and 5 carbendazin + thiram + thiodicarb. The evaluated parameters included emergency, lesser cornstalk borer (Elasmopalpus lignosellus efficiency control and seed pathology. For the parameters emergency and borer control the best results were obtained with the treatments including fipronil insecticide. As for seed pathology, treatments with thiodicarb insecticide were more efficient, indicating a suitable compatibility of this insecticide with the

  18. Specification of requirements to get a license for an Independent Spent Fuel Dry Storage Installation (ISFSI) at the site of the NPP-LV; Especificacion de los requerimientos para tramitar una licencia de una instalacion independiente de almacenamiento temporal en seco de combustible gastado (ISFSI) en el sitio de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Serrano R, M. L., E-mail: mlserrano@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan 779, Col. Narvarte, 03020 Ciudad de Mexico (Mexico)

    2015-09-15

    This article describes some of the work done in the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) to define specifically the requirements that the Federal Electricity Commission (CFE) shall meet to submit for consideration of CNSNS an operation request of an Independent Spent Fuel Dry Storage Installation (ISFSI). The project of a facility of this type arose from the need to provide storage capacity for spent nuclear fuel in the nuclear power plant of Laguna Verde (NPP-LV) and to continue the operation at the same facility in a safe manner. The licensing of these facilities in the United States of America has two modes: specific license or general license. The characteristics of these licenses are described in this article. However, in Mexico the existing national legislation is not designed for such license types, in fact there is a lack of standards or regulations in this regard. The regulatory law of Article 27 of the Constitution in the nuclear matter, only generally establishes that this type of facility requires an authorization from the Ministry of Energy. For this reason and because there is not a national legislation, was necessary to use the legislation that provides the Nuclear Regulatory Commission of USA, the US NRC. However, it cannot be applied as is established, so was necessary that the CNSNS analyze one by one the requirements of both types of license and determine what would be required to NPP-LV to submit its operating license of ISFSI. The American regulatory applicable to an ISFSI, the 10-Cfr-72 of the US NRC, establishes the requirements for both types of licenses. Chapter 10-Cfr was analyzed in all its clauses and coupled to the laws, regulations and standards as well as to the requirements established by CNSNS, all associated with a store spent fuel on site; the respective certification of containers for spent fuel dry storage was not included in this article, even though the CNSNS also performed that activity under the

  19. Vine kill interval and temperature effects on Fusarium dry rot development in Russet Burbank

    Science.gov (United States)

    Fusarium dry rot disease development in potato storage is universal to all market sectors and regions. The objective of this 2-year study was to evaluate three possible management decisions that may impact Fusarium dry rot development in storage: a) vine kill to harvest time, b) harvested tuber pulp...

  20. Designing CAF-adjuvanted dry powder vaccines: Spray drying preserves the adjuvant activity of CAF01

    DEFF Research Database (Denmark)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis

    2013-01-01

    spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol......Dry powder vaccine formulations are highly attractive due to improved storage stability and the possibility for particle engineering, as compared to liquid formulations. However, a prerequisite for formulating vaccines into dry formulations is that their physicochemical and adjuvant properties...... remain unchanged upon rehydration. Thus, we have identified and optimized the parameters of importance for the design of a spray dried powder formulation of the cationic liposomal adjuvant formulation 01 (CAF01) composed of dimethyldioctadecylammonium (DDA) bromide and trehalose 6,6′-dibehenate (TDB) via...

  1. Alterações bromatológicas e fermentativas durante o armazenamento de silagens de cana-de-açúcar com e sem milho desintegrado com palha e sabugo Chemical and fermentative changes during the storage period of the sugar cane silage with or without ground dried ear corn

    Directory of Open Access Journals (Sweden)

    Antônio Ricardo Evangelista

    2009-01-01

    Full Text Available Avaliaram-se as alterações bromatológicas e fermentativas de silagens de cana-de-açúcar com e sem milho desintegrado com palha e sabugo (MDPS durante 100 dias de armazenamento. Foram determinados o pH, a capacidade tamponante e os teores matéria seca (MS, proteína bruta (PB, fibra em detergente neutro (FDN, hemicelulose e nitrogênio amoniacal em relação ao nitrogênio total (N-NH3/NT. Os dados foram analisados em delineamento experimental inteiramente casualizado, em esquema fatorial 2 × 21, com três repetições, no qual o fator A foi constituído pela cana picada in natura e cana picada com milho desintegrado com palha e sabugo e o fator B, pelos 21 tempos de armazenagem. Os resultados obtidos foram submetidos à análise de regressão. Os valores de pH decresceram nos cinco primeiros dias de 5,2 para 3,5 na silagem controle e de 5,2 para 3,6 naquelas com milho desintegrado com palha e sabugo. As silagens com milho desintegrado com palha e sabugo apresentaram pH superior aos das silagens controle, em média de 0,09 unidades. A inclusão de milho desintegrado com palha e sabugo ocasionou aumento dos valores de NH3/NT em todos os tempos. Na silagem controle, a redução do teor de MS foi de 14,1 unidades percentuais, enquanto naquelas com MDPS, foi de 8,8 unidades percentuais. O milho desintegrado com palha e sabugo reduziu em 17 unidades percentuais o teor de fibra em detergente neutro das silagens, o que está relacionado ao menor valor de FDN do aditivo. Silagens de cana-de-açúcar apresentam alterações bromatológicas até 100 dias de armazenamento, não devendo permanecer armazenadas por longos períodos.The chemical and fermentative changes of the sugar cane ensiled without or with (control ground dried ear corn (GDEC were evaluated during 100 days of storage period. The pH values, buffer capacity (BC, dry matter (DM, crude protein (CP, neutral detergent fiber (NDF, acid detergent fiber (ADF, hemicellulose (HM ammonia

  2. Storage of sunflower seeds

    Directory of Open Access Journals (Sweden)

    Denise de Castro Lima

    Full Text Available The sunflower is among the top five crops in the world for the production of edible vegetable oil. The species displays rustic behavior, with an excellent edaphic and climatic adaptability index, being able to be cultivated throughout Brazil. Seed quality is the key to increasing production and productivity in the sunflower. The objective of this work was to monitor the viability of sunflower seeds with a view to their conservation when stored in different environments and packaging. The seeds were packed in paper bags, multilayered paper, black polyethylene and PET bottles; and stored for a period of twelve months in the following environments: dry cold room (10 ºC and 55% RH, the ambient conditions of Fortaleza, Ceará, Brazil (30-32 ºC and 75% RH, refrigerator (4 ºC and 38-43% RH and freezer (-20 ºC. Every three months, the water content of the seeds was determined and germination, accelerated ageing, speed of emergence index, and seedling dry weight were evaluated. The experimental design was completely randomized, in a scheme of split-lots, with four replications. It can be concluded that the natural environment is not suitable for the storage of sunflower seeds. Sunflower seeds remain viable for 12 months when stored in a dry cold room, refrigerator or freezer, irrespective of the type of packaging used.

  3. Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-09-30

    Energy storage technology is critical if the U.S. is to achieve more than 25% penetration of renewable electrical energy, given the intermittency of wind and solar. Energy density is a critical parameter in the economic viability of any energy storage system with liquid fuels being 10 to 100 times better than batteries. However, the economical conversion of electricity to fuel still presents significant technical challenges. This project addressed these challenges by focusing on a specific approach: efficient processes to convert electricity, water and nitrogen to ammonia. Ammonia has many attributes that make it the ideal energy storage compound. The feed stocks are plentiful, ammonia is easily liquefied and routinely stored in large volumes in cheap containers, and it has exceptional energy density for grid scale electrical energy storage. Ammonia can be oxidized efficiently in fuel cells or advanced Carnot cycle engines yielding water and nitrogen as end products. Because of the high energy density and low reactivity of ammonia, the capital cost for grid storage will be lower than any other storage application. This project developed the theoretical foundations of N2 catalysis on specific catalysts and provided for the first time experimental evidence for activation of Mo 2N based catalysts. Theory also revealed that the N atom adsorbed in the bridging position between two metal atoms is the critical step for catalysis. Simple electrochemical ammonia production reactors were designed and built in this project using two novel electrolyte systems. The first one demonstrated the use of ionic liquid electrolytes at room temperature and the second the use of pyrophosphate based electrolytes at intermediate temperatures (200 – 300 ºC). The mechanism of high proton conduction in the pyrophosphate materials was found to be associated with a polyphosphate second phase contrary to literature claims and ammonia production rates as high as 5X 10

  4. Cryopreservation of spin-dried mammalian cells.

    Directory of Open Access Journals (Sweden)

    Nilay Chakraborty

    Full Text Available This study reports an alternative approach to achieve vitrification where cells are pre-desiccated prior to cooling to cryogenic temperatures for storage. Chinese Hamster Ovary (CHO cells suspended in a trehalose solution were rapidly and uniformly desiccated to a low moisture content (<0.12 g of water per g of dry weight using a spin-drying technique. Trehalose was also introduced into the cells using a high-capacity trehalose transporter (TRET1. Fourier Transform Infrared Spectroscopy (FTIR was used to examine the uniformity of water concentration distribution in the spin-dried samples. 62% of the cells were shown to survive spin-drying in the presence of trehalose following immediate rehydration. The spin-dried samples were stored in liquid nitrogen (LN(2 at a vitrified state. It was shown that following re-warming to room temperature and re-hydration with a fully complemented cell culture medium, 51% of the spin-dried and vitrified cells survived and demonstrated normal growth characteristics. Spin-drying is a novel strategy that can be used to improve cryopreservation outcome by promoting rapid vitrification.

  5. Energy Efficient Textile Drying

    OpenAIRE

    Brunzell, Lena

    2006-01-01

    Traditionally, textiles were dried outdoors with the wind and the sun enhancing the drying process. Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions. Tumble dryers, however, consume large amounts of electrical energy. Over 4 million tumble dryers are sold each year in Europe and a considerable amount of energy is used for drying of clothes. Increasing energy costs and the awareness about environmental problems related to a large energy use has...

  6. Storage of solid propellants in space

    Science.gov (United States)

    Udlock, D. E.

    1977-01-01

    A test program is described which determines the extent of physical property changes that result from extended space exposure. Primary emphasis was placed on determining the effects of space vacuum. Solid propellants were stored and their physical properties tested in a vacuum and in a dry environment. The storage caused significantly greater increases in the propellants' modulus and maximum tensile strength than occurred in parallel ambient stored samples. The data indicate that the loss of trace amounts of residual moisture from cured propellant is the apparent cause of the observed propellant property changes. Therefore, initial screening tests were carried out under dry storage conditions. Upon completion of the dry storage tests, appropriate propellant samples are exposed to an actual space environment using the Long Duration Exposure Facility (LDEF).

  7. Hydrogen storage

    NARCIS (Netherlands)

    Peters, C.J.; Sloan, E.D.

    2005-01-01

    The invention relates to the storage of hydrogen. The invention relates especially to storing hydrogen in a clathrate hydrate. The clathrate hydrate according to the present invention originates from a composition, which comprises water and hydrogen, as well as a promotor compound. The promotor comp

  8. Treatment of defective fuel rods for interim storage

    Energy Technology Data Exchange (ETDEWEB)

    Muenchow, K.; Hummel, W. [AREVA NP GmbH, Erlangen (Germany)

    2013-07-01

    In this paper we look exclusively at the treatment of defective fuel rods for long-term dry interim storage at the nuclear power plant, in order to avoid off-site transports. AREVA has developed a technique that allows verifiably adequate drying of the defective fuel rods and reconstructs the barrier for retaining radioactive materials. This is done by individually encapsulating the defective fuel rods and achieving gas-tightness by seal welding. This guarantees the retention of radioactive materials during the storage period of at least 40 years in a transport and storage flask in an interim storage facility at site. (orig.)

  9. Automation of peanut drying with a sensor network including an in-shell kernel moisture sensor

    Science.gov (United States)

    Peanut drying is an essential task in the processing and handling of peanuts. Peanuts leave the fields with kernel moisture contents > 20% wet basis and need to be dried to < 10.5% w.b. for grading and storage purposes. Current peanut drying processes utilize decision support software based on model...

  10. 40 CFR 417.150 - Applicability; description of the manufacture of spray dried detergents subcategory.

    Science.gov (United States)

    2010-07-01

    ... detergents, including but not limited to assembly and storage of raw materials, crutching, spray drying... manufacture of spray dried detergents subcategory. 417.150 Section 417.150 Protection of Environment... POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.150...

  11. Fundamentals of freeze-drying.

    Science.gov (United States)

    Nail, Steven L; Jiang, Shan; Chongprasert, Suchart; Knopp, Shawn A

    2002-01-01

    --the dominant mechanism of heat transfer in freeze-drying--is inefficient at the pressures used in freeze-drying. Steps should be taken to improve the thermal contact between the product and the shelf of the freeze dryer, such as eliminating metal trays from the drying process. Quantitation of the heat transfer coefficient for the geometry used is a useful way of assessing the impact of changes in the system such as elimination of product trays and changes in the vial. Because heat transfer by conduction through the vapor increases with increasing pressure, the commonly held point of view that "the lower the pressure, the better" is not true with respect to process efficiency. The optimum pressure for a given product is a function of the temperature at which freeze-drying is carried out, and lower pressures are needed at low product temperatures. The controlling resistance to mass transfer is almost always the resistance of the partially dried solids above the submination interface. This resistance can be minimized by avoiding fill volumes of more than about half the volume of the container. The development scientist should also recognize that very high concentrations of solute may not be appropriate for optimum freeze-drying, particularly if the resistance of the dried product layer increases sharply with concentration. Although the last 10 years has seen the publication of a significant body of literature of great value in allowing development scientists and engineers to "work smarter," there is still much work needed in both the science and the technology of freeze-drying. Scientific development is needed for improving analytical methodology for characterization of frozen systems and freeze-dried solids. A better understanding of the relationship between molecular mobility and reactivity is needed to allow accurate prediction of product stability at the intended storage temperature based on accelerated stability at higher temperatures. This requires that the temperature

  12. Effect of Drying Methods on Moisture Distribution of Paddy Rice

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Variation during IR and heated-air drying process and effect on milling quality with moisture difference of paddy rice were investigated. The results indicate that the moisture SD (Standard Deviation) decreases during IR (Infrared Radiation) and heated-air (HA) drying process, and moisture uniform level for the paddy rice dried by IR treatment is higher than that by heated-air treatment. No matter IR or HA, the higher initial SD of MCs is, the bigger of the variable of the SDR value will be at the beginning stage of dried paddy storage.

  13. Efecto del método de secado en la longevidad y la calidad de las semillas de Bauhinia purpurea.: I. Almacenamiento en Condiciones Ambientales Effect of the drying method on the longevity and quality of seeds from Bauhinia purpurea.: I. Storage under ambient conditions

    Directory of Open Access Journals (Sweden)

    Marlen Navarro

    2007-11-01

    Full Text Available Se realizó un experimento con el objetivo de determinar la influencia combinada de diferentes métodos de secado, las condiciones de almacenamiento al ambiente y la edad fisiológica de las semillas de B. purpurea, en la capacidad germinativa y en la calidad de estas. Los tratamientos para el secado fueron: A en las legumbres, B artificial, y C al sol. Se determinó el porcentaje de viabilidad y de germinación, así como el contenido de humedad (CH, con una frecuencia mensual durante un año de almacenamiento; además se registró la temperatura y la humedad relativa (máxima y mínima durante el período evaluado. En el procesamiento de la información se utilizaron análisis multivariados (GLM y Factorial. En los tratamientos A y C se observaron semejanzas en cuanto a la viabilidad y la germinación, aunque las semillas alcanzaron la muerte fisiológica a los siete y nueve meses de permanencia en el almacén, respectivamente. El secado de las semillas con silicagel mostró que la pérdida de la capacidad germinativa siguió un modelo polinomial cúbico, con una marcada tendencia a la linealidad, y al finalizar el estudio fue de 70%. Las diferencias entre el CH de las semillas secadas artificialmente (B y al sol (C permitieron confirmar que la longevidad en B fue dos a cuatro veces mayor que en C. Los factores más influyentes en el ritmo de pérdida de la calidad de las semillas B. purpurea almacenadas al ambiente fueron el contenido de humedad y la edad.A trial was carried out with the objective of determining the combined influence of different drying methods, the storage under ambient conditions and the physiological age of the seeds from B. purpurea, on their germination capacity and quality. The treatments for drying were: A in the pods, B artificial and C under sunlight. The percentage of viability and germination, as well as the moisture content (MC, were determined, with a monthly frequency during a year of storage; in addition the

  14. Dry vacuum pumps

    Science.gov (United States)

    Sibuet, R.

    2008-05-01

    For decades and for ultimate pressure below 1 mbar, oil-sealed Rotary Vane Pumps have been the most popular solution for a wide range of vacuum applications. In the late 80ies, Semiconductor Industry has initiated the development of the first dry roughing pumps. Today SC applications are only using dry pumps and dry pumping packages. Since that time, pumps manufacturers have developed dry vacuum pumps technologies in order to make them attractive for other applications. The trend to replace lubricated pumps by dry pumps is now spreading over many other market segments. For the Semiconductor Industry, it has been quite easy to understand the benefits of dry pumps, in terms of Cost of Ownership, process contamination and up-time. In this paper, Technology of Dry pumps, its application in R&D/industries, merits over conventional pumps and future growth scope will be discussed.

  15. Underground Storage Tanks - Storage Tank Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — A Storage Tank Location is a DEP primary facility type, and its sole sub-facility is the storage tank itself. Storage tanks are aboveground or underground, and are...

  16. Oil Storage Facilities - Storage Tank Locations

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — A Storage Tank Location is a DEP primary facility type, and its sole sub-facility is the storage tank itself. Storage tanks are aboveground or underground, and are...

  17. PADDY DRYING IN MIXED ADSORPTION DRYER WITH ZEOLITE: DRYING RATE AND TIME ESTIMATION

    Directory of Open Access Journals (Sweden)

    Mochammad Djaeni

    2013-11-01

    Full Text Available Recently, the main problem of the rice stock and distribution in Indonesia is the quality degradation as indicated in unpleasant odor (smelly, stained, yellowness, and high percentage of broken rice. This is due to the low of paddy quality dried by from either direct sunlight or conventional fluidized bed dryer. As a result, the paddy cracks and breaks easily during milling in which causes the storage life being shorter as the enzymatic degradation by germ or fungi occurs. Air dehumidified with zeolite at drying medium temperature is potential to improve the quality of paddy. Zeolite is a material having high affinity to water vapor. In this case, the paddy and zeolite was mixed and fluidized with the air. The air will evaporate water from paddy, and at same time, the zeolite will adsorb water from air. Hence, the humidity of dryer can be kept low in which improves the driving force for drying. This work discusses the effect of presence of zeolite in the dryer, operational drying temperature, air velocity and relative humidity on drying rate of paddy. The results showed that increasing of zeolite as well as operational temperature increased the drying rate. In addition, using the model, the air dehumidification with zeolite and increase of air velocity can speed up drying time significantly at operational temperature below 80oC. This condition is very suitable for paddy drying since the quality degradation can be avoided.

  18. Freeze-drying of lactic acid bacteria.

    Science.gov (United States)

    Fonseca, Fernanda; Cenard, Stéphanie; Passot, Stéphanie

    2015-01-01

    Lactic acid bacteria are of great importance for the food and biotechnology industry. They are widely used as starters for manufacturing food (e.g., yogurt, cheese, fermented meats, and vegetables) and probiotic products, as well as for green chemistry applications. Freeze-drying or lyophilization is a convenient method for preservation of bacteria. By reducing water activity to values below 0.2, it allows long-term storage and low-cost distribution at suprazero temperatures, while minimizing losses in viability and functionality. Stabilization of bacteria via freeze-drying starts with the addition of a protectant solution to the bacterial suspension. Freeze-drying includes three steps, namely, (1) freezing of the concentrated and protected cell suspension, (2) primary drying to remove ice by sublimation, and (3) secondary drying to remove unfrozen water by desorption. In this chapter we describe a method for freeze-drying of lactic acid bacteria at a pilot scale, thus allowing control of the process parameters for maximal survival and functionality recovery.

  19. Cryopreservation of spin-dried mammalian cells.

    Science.gov (United States)

    Chakraborty, Nilay; Menze, Michael A; Malsam, Jason; Aksan, Alptekin; Hand, Steven C; Toner, Mehmet

    2011-01-01

    This study reports an alternative approach to achieve vitrification where cells are pre-desiccated prior to cooling to cryogenic temperatures for storage. Chinese Hamster Ovary (CHO) cells suspended in a trehalose solution were rapidly and uniformly desiccated to a low moisture content (spin-drying technique. Trehalose was also introduced into the cells using a high-capacity trehalose transporter (TRET1). Fourier Transform Infrared Spectroscopy (FTIR) was used to examine the uniformity of water concentration distribution in the spin-dried samples. 62% of the cells were shown to survive spin-drying in the presence of trehalose following immediate rehydration. The spin-dried samples were stored in liquid nitrogen (LN(2)) at a vitrified state. It was shown that following re-warming to room temperature and re-hydration with a fully complemented cell culture medium, 51% of the spin-dried and vitrified cells survived and demonstrated normal growth characteristics. Spin-drying is a novel strategy that can be used to improve cryopreservation outcome by promoting rapid vitrification.

  20. 米厂风机的高效运行分析%The Application of Traditional Storage Granaries and Standard Storage Granaries in Farmers' Grain Storage

    Institute of Scientific and Technical Information of China (English)

    徐洋; 阙玉喜; 朱和平; 陈良武; 崇克伟; 胡胜桃; 邵庆余

    2012-01-01

    At sampling a questionnaire was used to evaluate grain storage practices. Got to farmers' house monitoring the situation of grain storage. Farmers were asked what storage structure they used, their storage form, storage period, pest problems in storage and what was done against them. Using traditional storage granaries, farmers often need repeated handling, transfering the maize from a drying or temporary store to a more durable one. The survey found insects, rodents and sparrows damaging stored grain. Therefore, this article would analyse two different storage form in Ningxia Region farmers' to compare their contribution on reducing loss rate.%高效率优质风机对降低碾米厂运作成本,节约能源是非常重要的。用理论与数据的方式探讨了风机对碾米厂提高经济效益的作用。

  1. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  2. Effects of composite surface coating and pre-drying on the properties of kabanosy dry sausage.

    Science.gov (United States)

    Tyburcy, Andrzej; Kozyra, Daniel

    2010-10-01

    Coating of dry sausages with renewable materials could be an alternative to vacuum packaging. In this study kabanosy dry sausage was coated with a composite emulsion and stored for 7 or 15 days at 4-6 degrees C. Effects of different emulsion formulas (0.5 or 1% w/w of kappa-carrageenan and 5 or 10% w/w of glycerol) and pre-drying of coated sausages (at 50 degrees C for 1.5h) were investigated. Carrageenan concentration had a significant effect (Pcoatings. At both glycerol concentration levels, coatings had no visible cracks and were easily removed from the sausage surface after 7 and 15 days of storage. The colour values of coatings (L*, a*, and b*) changed along with the decreasing water activity during storage. Pre-drying of coated sausages reduced peeled product weight loss after storage. The financial analysis showed that among coatings tested the best proved to be the emulsion containing (w/w): 5% glycerol, 5% gelatin, 0.5% carrageenan, 20% lard, 20% beeswax, and 50% water. Copyright (c) 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  3. Ambient Dried Aerogels

    Science.gov (United States)

    Jones, Steven M.; Paik, Jong-Ah

    2013-01-01

    A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel as thermal insulation in a wide variety of instances where supercritically dried aerogels cannot be used. More specifically, thermoelectric devices can use ambient dried aerogel, where the advantages are in situ production using the cast-in ability of an aerogel. Previously, aerogels required supercritical conditions (high temperature and high pressure) to be dried. Ambient dried aerogels can be dried at room temperature and pressure. This allows many materials, such as plastics and certain metal alloys that cannot survive supercritical conditions, to be directly immersed in liquid aerogel precursor and then encapsulated in the final, dried aerogel. Additionally, the metalized Mylar films that could not survive the previous methods of making aerogels can survive the ambient drying technique, thus making multilayer insulation (MLI) materials possible. This results in lighter insulation material as well. Because this innovation does not require high-temperature or high-pressure drying, ambient dried aerogels are much less expensive to produce. The equipment needed to conduct supercritical drying costs many tens of thousands of dollars, and has associated running expenses for power, pressurized gasses, and maintenance. The ambient drying process also expands the size of the pieces of aerogel that can be made because a high-temperature, high-pressure system typically has internal dimensions of up to 30 cm in diameter and 60 cm in height. In the case of this innovation, the only limitation on the size of the aerogels produced would be in the ability of the solvent in the wet gel to escape from the gel network.

  4. Ocean Dynamics: Vietnam DRI

    Science.gov (United States)

    2014-09-30

    Dynamics: Vietnam DRI Robert Pinkel Marine Physical Laboratory Scripps Institution of Oceanography La Jolla California 92093-0213 Phone: (858) 534...DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Ocean Dynamics: Vietnam DRI 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...cycle.. The Thorpe-scale estimates are local to Site III. South China Sea Process Cruise 2014 Under Vietnam DRI funding, Researcher Drew Lucas

  5. Dry etching for microelectronics

    CERN Document Server

    Powell, RA

    1984-01-01

    This volume collects together for the first time a series of in-depth, critical reviews of important topics in dry etching, such as dry processing of III-V compound semiconductors, dry etching of refractory metal silicides and dry etching aluminium and aluminium alloys. This topical format provides the reader with more specialised information and references than found in a general review article. In addition, it presents a broad perspective which would otherwise have to be gained by reading a large number of individual research papers. An additional important and unique feature of this book

  6. Effectiveness of convective drying to conserve indigenous yeasts with high volatile profile isolated from algerian fermented raw bovine milk (Rayeb

    Directory of Open Access Journals (Sweden)

    Latifa HAMOUDI-BELARBI

    2016-01-01

    Full Text Available Abstract Yeasts Candida tropicalis, Yarrowia lipolytica, Wickerhamomyces anomalus, Issatchenkia orientalis, Kluyveromyces marxianus, Saprochaete suaveolens and Trichosporon coremiiforme were isolated and identified by physiological, biochemical tests with API 20C AUX system and molecular methods by restriction fragment analysis of PCR-amplified 28S-rRNA from Algerian fermented raw bovine milk (Rayeb. Selected yeasts S. suaveolens, I. orientalis, K. marxianus and W. anomalus produced esters and higher esters which can exert a pertinent influence on the sensory characteristics of Rayeb. Viability of S. suaveolens and W. anomalus using three methods of drying (freeze-drying, convective drying, and spray-drying and during 4 months of storage at 4 °C and 25 °C in the darkness was studied. Immediately after each drying method, high survival was obtained using freeze-drying followed by convective drying in rice cakes and spray-drying respectively. During storage at 4 °C, convective drying provided better survival of yeast cultures of S. suaveolens and W. anomalus than freeze-drying. At 25 °C of storage, convective and freeze-dried yeast cultures showed no significant loss of viable cells up to 2 months of storage. Spray-dried yeast cultures had the greatest loss of viable count during the 3 months of storage at 25 °C.

  7. Design review report FFTF interim storage cask

    Energy Technology Data Exchange (ETDEWEB)

    Scott, P.L.

    1995-01-03

    Final Design Review Report for the FFTF Interim Storage Cask. The Interim Storage Cask (ISC) will be used for long term above ground dry storage of FFTF irradiated fuel in Core Component Containers (CCC)s. The CCC has been designed and will house assemblies that have been sodium washed in the IEM Cell. The Solid Waste Cask (SWC) will transfer a full CCC from the IEM Cell to the RSB Cask Loading Station where the ISC will be located to receive it. Once the loaded ISC has been sealed at the RSB Cask Loading Station, it will be transferred by facility crane to the DSWC Transporter. After the ISC has been transferred to the Interim Storage Area (ISA), which is yet to be designed, a mobile crane will be used to place the ISC in its final storage location.

  8. Spent fuel storage requirements 1993--2040

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    Historical inventories of spent fuel are combined with U.S. Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements through the year 2040. The needs are estimated for storage capacity beyond that presently available in the reactor storage pools. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of spent fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. The nuclear utilities provide historical data through December 1992 on the end of reactor life are based on the DOE/Energy Information Administration (EIA) estimates of future nuclear capacity, generation, and spent fuel discharges.

  9. The iron content and ferritin contribution in fresh, dried, and toasted nori, Pyropia yezoensis.

    Science.gov (United States)

    Masuda, Taro; Yamamoto, Ami; Toyohara, Haruhiko

    2015-01-01

    Iron is one of the essential trace elements for humans. In this study, the iron contents in fresh, dried, and toasted nori (Pyropia yezoensis) were analyzed. The mean iron content of fresh, dried, and toasted nori were 19.0, 22.6, and 26.2 mg/100 g (dry weight), respectively. These values were superior to other food of plant origin. Furthermore, most of the iron in nori was maintained during processing, such as washing, drying, and toasting. Then, the form of iron in fresh, dried, and toasted nori was analyzed. As a result, an iron storage protein ferritin contributed to iron storage in raw and dried nori, although the precise rate of its contribution is yet to be determined, while ferritin protein cage was degraded in the toasted nori. It is the first report that verified the ferritin contribution to iron storage in such edible macroalgae with commercial importance.

  10. Designing CAF-adjuvanted dry powder vaccines: spray drying preserves the adjuvant activity of CAF01.

    Science.gov (United States)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis; Larsen, Niels Bent; Hinrichs, Wouter Leonardus Joseph; Andersen, Peter; Rantanen, Jukka; Nielsen, Hanne Mørck; Yang, Mingshi; Foged, Camilla

    2013-05-10

    Dry powder vaccine formulations are highly attractive due to improved storage stability and the possibility for particle engineering, as compared to liquid formulations. However, a prerequisite for formulating vaccines into dry formulations is that their physicochemical and adjuvant properties remain unchanged upon rehydration. Thus, we have identified and optimized the parameters of importance for the design of a spray dried powder formulation of the cationic liposomal adjuvant formulation 01 (CAF01) composed of dimethyldioctadecylammonium (DDA) bromide and trehalose 6,6'-dibehenate (TDB) via spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol. Trehalose and lactose were in the glassy state upon co-spray drying with the liposomes, whereas mannitol appeared crystalline, suggesting that the ability of the stabilizer to form a glassy matrix around the liposomes is one of the prerequisites for stabilization. Systematic studies on the effect of process parameters suggested that a fast drying rate is essential to avoid phase separation and lipid accumulation at the surface of the microparticles during spray drying. Finally, immunization studies in mice with CAF01 in combination with the tuberculosis antigen Ag85B-ESAT6-Rv2660c (H56) demonstrated that spray drying of CAF01 with trehalose under optimal processing conditions resulted in the preservation of the adjuvant activity in vivo. These data demonstrate the importance of liposome stabilization via optimization of formulation and processing conditions in the engineering of dry powder liposome formulations.

  11. Spent nuclear fuel storage. (Latest citations from the NTIS bibliographic database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The bibliography contains citations concerning spent nuclear fuel storage technologies, facilities, sites, and assessment. References review wet and dry storage, spent fuel casks and pools, underground storage, monitored and retrievable storage systems, and aluminum-clad spent fuels. Environmental impact, siting criteria, regulations, and risk assessment are also discussed. Computer codes and models for storage safety are covered. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  12. Lyophilization conditions for the storage of monooxygenases

    NARCIS (Netherlands)

    van Beek, Hugo L.; Beyer, Nina; Janssen, Dick B.; Fraaije, Marco W.

    2015-01-01

    Cyclohexanone monooxygenase (CHMO) was used as a model enzyme to find suitable freeze-drying conditions for long-term storage of an isolated monooxygenase. CHMO is a Baeyer-Villiger monooxygenase (BVMO) known for its ability to catalyze a large number of oxidation reactions. With a focus on establis

  13. Control of dry season evapotranspiration over the Amazonian forest as inferred from observations at a southern Amazon forest site

    NARCIS (Netherlands)

    Negrón Juárez, R.I.; Hodnett, M.G.; Fu, R.; Goulden, M.L.; Randow, von C.

    2007-01-01

    The extent to which soil water storage can support an average dry season evapotranspiration (ET) is investigated using observations from the Rebio Jarú site for the period of 2000 to 2002. During the dry season, when total rainfall is less than 100 mm, the soil moisture storage available to root upt

  14. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? Written By: Kierstan ...

  15. Dry imaging cameras

    Directory of Open Access Journals (Sweden)

    I K Indrajit

    2011-01-01

    Full Text Available Dry imaging cameras are important hard copy devices in radiology. Using dry imaging camera, multiformat images of digital modalities in radiology are created from a sealed unit of unexposed films. The functioning of a modern dry camera, involves a blend of concurrent processes, in areas of diverse sciences like computers, mechanics, thermal, optics, electricity and radiography. Broadly, hard copy devices are classified as laser and non laser based technology. When compared with the working knowledge and technical awareness of different modalities in radiology, the understanding of a dry imaging camera is often superficial and neglected. To fill this void, this article outlines the key features of a modern dry camera and its important issues that impact radiology workflow.

  16. Alfalfa hay storage losses study as influenced by bale type and storage method. Quarterly report, July 1, 1997--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Cuomo, G.; Sheaffer, C.; Martin, N. [and others

    1997-10-30

    This experiment was conducted in cooperation with the Minnesota Alfalfa Producers (MnVAP) cooperative. Alfalfa for use as both a biomass energy source and as a protein supplement has been proposed by MnVAP. Research has shown that alfalfa deteriorates over time in storage, and that storage method and bale type affect the amount of deterioration. Therefore, evaluation of different storage methods and bale types on dry matter and quality losses of alfalfa leaf and stem components is important information for the alfalfa grower and the MnVAP cooperative. Two bale types were evaluated for four storage methods, and measurements were made of initial and final bale weights, dry matter, leaf and stem components, and forage quality estimates. Few differences were detected among bale types for dry matter losses, and interactions among bale type and storage method were not detected. This indicates that dry matter losses were similar for different bale types regardless of the storage method. However, differences in dry matter losses and visible spoilage were detected among storage methods. No interactions between bale type and storage method were detected for forage quality parameters, indicating that forage quality losses as a result of storage were similar for different bale types. Bale type by sample type and storage method by sample type interactions were detected. Many of these were the result of poorer quality alfalfa. 4 refs., 9 tabs.

  17. SILAGE CANE SUGAR ADDED WITH DRIED BREWER

    Directory of Open Access Journals (Sweden)

    W. J. R. Castro

    2015-02-01

    Full Text Available The objective of this experiment was to evaluate the fermentative parameters and chemical composition of silage cane sugar added with residue dried brewery. The experimental design was completely randomized with four treatments and four replications: 100% cane sugar; 90% of cane sugar + 10% residue dried brewer; 80% of cane sugar + 20% residue dried brewer and 70% cane sugar + 30% dried brewer based on natural matter, composed silages. The sugar cane was chopped in a stationary machine with forage particle size of approximately 2 cm, and homogenized manually with the additives. For storage chopped fresh weight were used in experimental silos capacity of about 4 liters. The results showed that the contents of dry matter and crude protein showed positive linear (P0.05 with mean value of 3.81, while for ether extract and ash results were positive linear (P0.05 for N ammonia presented average value of 4.18. It is concluded that the addition of brewer dehydrated improves the fermentation process of silage cane sugar, in addition to improving their nutritional characteristics.

  18. Stability of dry coated solid dosage forms.

    Science.gov (United States)

    Kablitz, Caroline Désirée; Urbanetz, Nora Anne

    2009-01-01

    The dry coating process was evaluated in terms of storage stability investigating drug release and agglomeration tendency of the different coated oral dosage forms; hydroxypropyl methylcellulose acetate succinate (HPMCAS) was used with triethylcitrate (TEC) as plasticizer and acetylated monoglyceride (Myvacet) as wetting agent. Talc or colloidal silicon dioxide (Aerosil) was used as anti-tacking agents. In contrast to coating formulations consisting of HPMCAS and Myvacet all formulations containing TEC showed enteric resistance and no agglomeration tendency after preparation. After storage at 10% RH +/- 5% enteric resistance is increased slightly. This increase is more pronounced at 60% RH +/- 5%. The formulations without anti-tacking agents showed higher drug releases after 12 and 24 months due to the damage of the film's integrity during sample preparation caused by the high tackiness of the film. Tackiness is not affected by storing if samples are stored at low relative humidity. At high relative humidity tackiness increases upon storage especially for formulations without anti-tacking agents. The sieving results of the agglomeration measurements after storage can be confirmed by ring shear measurements performed immediately after preparation and approved to be a tool, which is able to predict the agglomeration during storage.

  19. Spatial Information Storage

    Directory of Open Access Journals (Sweden)

    Vladimir Markelov

    2013-01-01

    Full Text Available The article describes the spatial information storage, shows the features of spatial information and of such storage systems formation. Requirements for information storage technologies and for the data management in storage systems are determined. Cartographic information storage and updating features are shown. The article proves that intelligent solutions are the most efficient means of working with large amounts of spatial data.

  20. Effects of drying method, storage period and carbon: nitrogen ratio ...

    African Journals Online (AJOL)

    Taghwo

    2012-12-03

    Dec 3, 2012 ... MATERIALS AND METHODS. Experimental .... help of GENSTAT computer software package (Anonymous, 2010). RESULTS AND ... microbial activity. Linn and Doran ..... Preservation of soil samples for inorganic nitrogen ...

  1. Stripping with dry ice

    Science.gov (United States)

    Malavallon, Olivier

    1995-04-01

    Mechanical-type stripping using dry ice (solid CO2) consists in blasting particles of dry ice onto the painted surface. This surface can be used alone or in duplex according to type of substrate to be treated. According to operating conditions, three physical mechanisms may be involved when blasting dry ice particles onto a paint system: thermal shock, differential thermal contraction, and mechanical shock. The blast nozzle, nozzle travel speed, blast angle, stripping distance, and compressed air pressure and media flow rate influence the stripping quality and the uniformity and efficiency obtained.

  2. Technical basis for storage of Zircaloy-clad spent fuel in inert gases

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.B. Jr.; Gilbert, E.R.

    1983-09-01

    This report summarizes the technical bases to establish safe conditions for dry storage of Zircaloy-clad fuel. Dry storage of fuel with zirconium alloy cladding has been licensed in Canada, the Federal Republic of Germany, and Switzerland. In addition, dry storage demonstrations, hot cell tests, and modeling have been conducted using Zircaloy-clad fuel. The demonstrations have included irradiated boiling water reactor, pressurized heavy-water reactor, and pressurized water reactor (PWR) fuel assemblies. Irradiated fuel has been emplaced in and retrieved from metal casks, dry wells, silos, and a vault. Dry storage tests and demonstrations have involved {similar_to}5,000 fuel rods, and {similar_to}600 rods have been monitored during dry storage in inert gases with maximum cladding temperatures ranging from 50 to 570{sup 0}C. Although some tests and demonstrations are still in progress, there is currently no evidence that any rods exposed to inert gases have failed (one PWR rod exposed to an air cover gas failed at {similar_to}70{sup 0}C). Based on this favorable experience, it is concluded that there is sufficient information on fuel rod behavior, storage conditions, and potential cladding failure mechanisms to support licensing of dry storage in the United States. This licensing position includes a requirement for inert cover gases and a maximum cladding temperature guideline of 380{sup 0}C for Zircaloy-clad fuel. Using an inert cover gas assures that even if fuel with cladding defects were placed in dry storage, or if defects develop during storage, the defects would not propagate. Tests and demonstrations involving Zircaloy-clad rods and assemblies with maximum cladding temperatures above 400{sup 0}C are in progress. When the results from these tests have been evaluated, the viability of higher temperature limits should be examined. Acceptable conditions for storage in air and dry storage of consolidated fuel are issues yet to be resolved.

  3. Microencapsulated PCM thermal-energy storage system

    Energy Technology Data Exchange (ETDEWEB)

    Hawlader, M.N.A.; Uddin, M.S. [National Univ. of Singapore, Dept. of Chemical and Environmental Engineering, Singapore (Singapore); Khin, Mya Mya [National Univ. of Singapore, Dept. of Mechanical Engineering, Singapore (Singapore)

    2003-02-01

    The application of phase-change materials (PCM) for solar thermal-energy storage capacities has received considerable attention in recent years due to their large storage capacity and isothermal nature of the storage process. This study deals with the preparation and characterization of encapsulated paraffin-wax. Encapsulated paraffin particles were prepared by complex coacervation as well as spray-drying methods. The influence of different parameters on the characteristics and performance of a microencapsulated PCM in terms of encapsulation efficiency, and energy storage and release capacity has been investigated. The distribution of particle size and the morphology of microencapsulated PCM were analyzed by a scanning electron microscope (SEM). In the coacervation method, the optimum homogenizing time is 10 min and the amount of cross-linking agent is 6-8 mI. Results obtained from a differential scanning calorimeter (DSC) show that microcapsules prepared either by coacervation or the spray-drying method have a thermal energy storage/release capacity of about 145-240 J/g. Hence, encapsulated paraffin wax shows a good potential as a solar-energy storage material. (Author)

  4. Fuel Aging in Storage and Transportation (FAST): Accelerated Characterization and Performance Assessment of the Used Nuclear Fuel Storage System

    Energy Technology Data Exchange (ETDEWEB)

    McDeavitt, Sean [Texas A & M Univ., College Station, TX (United States). Dept. of Nuclear Engineering

    2016-08-02

    This Integrated Research Project (IRP) was established to characterize key limiting phenomena related to the performance of used nuclear fuel (UNF) storage systems. This was an applied engineering project with a specific application in view (i.e., UNF dry storage). The completed tasks made use of a mixture of basic science and engineering methods. The overall objective was to create, or enable the creation of, predictive tools in the form of observation methods, phenomenological models, and databases that will enable the design, installation, and licensing of dry UNF storage systems that will be capable of containing UNF for extended period of time.

  5. [Little Dry Creek Drainage

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Map of the drainage boundary, direction of flow, canals and ditches, and streets for the drainage study plan and profile for Little Dry Creek sub area in the North...

  6. What Is Dry Eye?

    Medline Plus

    Full Text Available ... information about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a ... the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media ...

  7. Cold Vacuum Drying Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  8. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide Eye ... What Is Dry Eye? Leer en Español: ¿Qué ...

  9. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Dry Eye Symptoms Related Ask an Ophthalmologist Answers Can a six-month dissolvable punctal plug be removed ... insert a permanent punctal plug? Sep 12, 2017 Can you explain why I have halos and blurry ...

  10. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide ... What Is Dry Eye? Written By: Kierstan Boyd ...

  11. What Is Dry Eye?

    Medline Plus

    Full Text Available ... about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a Tear- ... Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology ...

  12. Infrared radiation dry blanching.

    Science.gov (United States)

    For most processed fruits and vegetables, blanching is essential to inactivate the enzymes responsible for quality deterioration of fruits and vegetables in storage. Blanching also serves the purposes of microbial population reduction, color stabilization, and facilitation for further processing and...

  13. Biomarker for Glycogen Storage Diseases

    Science.gov (United States)

    2017-07-03

    Fructose Metabolism, Inborn Errors; Glycogen Storage Disease; Glycogen Storage Disease Type I; Glycogen Storage Disease Type II; Glycogen Storage Disease Type III; Glycogen Storage Disease Type IV; Glycogen Storage Disease Type V; Glycogen Storage Disease Type VI; Glycogen Storage Disease Type VII; Glycogen Storage Disease Type VIII

  14. Microencapsulated Lactobacillus rhamnosus GG powders: relationship of powder physical properties to probiotic survival during storage.

    Science.gov (United States)

    Ying, Dan Yang; Phoon, Mei Chi; Sanguansri, Luz; Weerakkody, Rangika; Burgar, Iko; Augustin, Mary Ann

    2010-01-01

    Freeze-dried commercial Lactobacillus rhamnosus GG (LGG) were encapsulated in an emulsion-based formulation stabilized by whey protein and resistant starch and either spray-dried or freeze-dried to produce probiotic microcapsules. There was no difference in loss of probiotics viability after spray drying or freeze drying. Particle size, morphology, moisture sorption, and water mobility of the powder microcapsules were examined. Particle size analysis and scanning electron microscopy showed that spray-dried LGG microcapsules (SDMC) were small spherical particles, whereas freeze-dried LGG microcapsules (FDMC) were larger nonspherical particles. Moisture sorption isotherms obtained using dynamic vapor sorption showed a slightly higher water uptake in spray-dried microcapsules. The effect of water mobility, as measured by nuclear magnetic resonance (NMR) spectroscopy, at various water activities (a(w) 0.32, 0.57, and 0.70) and probiotic viability during storage at 25 °C was also examined. Increasing the relative humidity of the environment at which the samples were stored caused an increase in water mobility and the rate of loss in viability. The viability data during storage indicated that SDMC had better storage stability compared to FDMC. Although more water was adsorbed for spray-dried than freeze-dried microcapsules, water mobility was similar for corresponding storage conditions because there was a stronger water-binding energy for spray-dried microcapsule. This possibly accounted for the improved survival of probiotics in spray-dried microcapsules.

  15. Seasonal thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.; Kannberg, L.D.; Raymond, J.R.

    1984-05-01

    This report describes the following: (1) the US Department of Energy Seasonal Thermal Energy Storage Program, (2) aquifer thermal energy storage technology, (3) alternative STES technology, (4) foreign studies in seasonal thermal energy storage, and (5) economic assessment.

  16. Electro-dry-adhesion.

    Science.gov (United States)

    Krahn, Jeffrey; Menon, Carlo

    2012-03-27

    This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.

  17. Sucrose Diffusion in Decellularized Heart Valves for Freeze-Drying.

    Science.gov (United States)

    Wang, Shangping; Oldenhof, Harriëtte; Goecke, Tobias; Ramm, Robert; Harder, Michael; Haverich, Axel; Hilfiker, Andres; Wolkers, Willem Frederik

    2015-09-01

    Decellularized heart valves can be used as starter matrix implants for heart valve replacement therapies in terms of guided tissue regeneration. Decellularized matrices ideally need to be long-term storable to assure off-the-shelf availability. Freeze-drying is an attractive preservation method, allowing storage at room temperature in a dried state. However, the two inherent processing steps, freezing and drying, can cause severe damage to extracellular matrix (ECM) proteins and the overall tissue histoarchitecture and thus impair biomechanical characteristics of resulting matrices. Freeze-drying therefore requires a lyoprotective agent that stabilizes endogenous structural proteins during both substeps and that forms a protective glassy state at room temperature. To estimate incubation times needed to infiltrate decellularized heart valves with the lyoprotectant sucrose, temperature-dependent diffusion studies were done using Fourier transform infrared spectroscopy. Glycerol, a cryoprotective agent, was studied for comparison. Diffusion of both protectants was found to exhibit Arrhenius behavior. The activation energies of sucrose and glycerol diffusion were found to be 15.9 and 37.7 kJ·mol(-1), respectively. It was estimated that 4 h of incubation at 37°C is sufficient to infiltrate heart valves with sucrose before freeze-drying. Application of a 5% sucrose solution was shown to stabilize acellular valve scaffolds during freeze-drying. Such freeze-dried tissues, however, displayed pores, which were attributed to ice crystal damage, whereas vacuum-dried scaffolds in comparison revealed no pores after drying and rehydration. Exposure to a hygroscopic sucrose solution (80%) before freeze-drying was shown to be an effective method to diminish pore formation in freeze-dried ECMs: matrix structures closely resembled those of control samples that were not freeze-dried. Heart valve matrices were shown to be in a glassy state after drying, suggesting that they can

  18. Produktivitas Benih Cabai Rawit Setelah Diperlakukan Dry Heat Treatment dan Penyimpanan

    OpenAIRE

    I GUSTI NGURAH RAKA; I DEWA NYOMAN NYANA; NI LUH MADE PRADNYAWATHI

    2015-01-01

    Productivity of Pepper Seeds Which are Treated Dry Heat Treatment and Storage Pepper plants (Capsicum frutescens L.) is one type of horticultural crops which is very high usage levels therefor, it is necessary to increase productivity dramatically. One effort to fulfil the need is preparing healthy seed with long shelf life . This study aims to determine the growth and yield of pepper plants whose seed was treated with dry heat treatment and storage. The experiment was conducted in Br . Marga...

  19. Standard guide for drying behavior of spent nuclear fuel

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This guide is organized to discuss the three major components of significance in the drying behavior of spent nuclear fuel: evaluating the need for drying, drying spent nuclear fuel, and confirmation of adequate dryness. 1.1.1 The guide addresses drying methods and their limitations in drying spent nuclear fuels that have been in storage at water pools. The guide discusses sources and forms of water that remain in SNF, its container, or both, after the drying process and discusses the importance and potential effects they may have on fuel integrity, and container materials. The effects of residual water are discussed mechanistically as a function of the container thermal and radiological environment to provide guidance on situations that may require extraordinary drying methods, specialized handling, or other treatments. 1.1.2 The basic issue in drying is to determine how dry the SNF must be in order to prevent issues with fuel retrievability, container pressurization, or container corrosion. Adequate d...

  20. Autochthonous "Bjelovars dried cheese"

    Directory of Open Access Journals (Sweden)

    Slavko Kirin

    2006-12-01

    Full Text Available «Dried cheese» is in autochthonous group of Bjelovar region cheeses which is still produced in rural domestic scale. The name of cheese originates from production procedure - drying for longer or shorter period in airy place after which the cheese is smoked, or is smoked only without drying. This type of cheese is produced in whole central region of Croatia which includes Međimurje, Podravina, Bilogora; Moslavina, Posavina and region around the capital. The aim of this paper is to describe and determine sensory, chemical and microbiological composition to determine its characteristics and production standards. As standards for sensory properties following characteristics can be used: a Outer shape: dimensions: diameter: 140-145 mm, height: 58-61 mm, mass: 700-750 g, equal, rounded shape, smooth skin, equal colour; b Consistency: easily cut, elastic, soft; c Cut: nicely combined white body, few improper holes of equal size; d Odour: pleasant milky acid odour, fairly smoky; e Taste: Fairly milky acidic taste, medium salty, fairly smoky taste. Depending on fat in dry matter content and water content in non fat dry matter, analyzed samples can be characterized as quarter fat, soft and semidry cheese. Higher acidity and saltiness was determined in some samples, microbiological analyses has shown that the most common contaminants are yeasts and moulds.

  1. Drying of Malaysian Capsicum annuum L. (Red Chili) Dried by Open and Solar Drying

    OpenAIRE

    Ahmad Fudholi; Mohd Yusof Othman; Mohd Hafidz Ruslan; Kamaruzzaman Sopian

    2013-01-01

    This study evaluated the performance of solar drying in the Malaysian red chili (Capsicum annuum L.). Red chilies were dried down from approximately 80% (wb) to 10% (wb) moisture content within 33 h. The drying process was conducted during the day, and it was compared with 65 h of open sun drying. Solar drying yielded a 49% saving in drying time compared with open sun drying. At the average solar radiation of 420 W/m2 and air flow rate of 0.07 kg/s, the collector, drying system, and pickup de...

  2. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn;

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  3. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  4. Trigger Point Dry Needling.

    Science.gov (United States)

    2017-03-01

    Increasingly, physical therapists in the United States and throughout the world are using dry needling to treat musculoskeletal pain, even though this treatment has been a controversial addition to practice. To better generalize to physical therapy practice the findings about dry needling thus far, the authors of a study published in the March 2017 issue of JOSPT identified the need for a systematic review examining the effectiveness of dry needling performed by physical therapists on people with musculoskeletal pain. Their review offers a meta-analysis of data from several included studies and assesses the evidence for risks of bias. J Orthop Sports Phys Ther 2017;47(3):150. doi:10.2519/jospt.2017.0502.

  5. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  6. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  7. Magnetically responsive dry fluids

    Science.gov (United States)

    Sousa, Filipa L.; Bustamante, Rodney; Millán, Angel; Palacio, Fernando; Trindade, Tito; Silva, Nuno J. O.

    2013-07-01

    Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid.Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr01784b

  8. Effect of drying conditions on triticale seed germination and weevil infestation

    Science.gov (United States)

    The combination of high protein content and a soft seed coat makes triticale vulnerable to attack by weevils. Drying triticale grain to moisture contents safe for storage can prevent infestation by weevils, but if grain is being stored for seed, high drying temperatures can affect seed germination. ...

  9. Circuits and signal conditioning for a peanut-drying monitoring system

    Science.gov (United States)

    Post-harvest processes at peanut buying points and other peanut grading facilities have a direct impact on the quality of the product. Peanut drying is an essential task for safe peanut storage. The rate at which peanuts are dried can also affect the flavor and milling qualities. Current peanut dryi...

  10. Atmospheric drivers of storage water use in Scots pine

    Directory of Open Access Journals (Sweden)

    H. Verbeeck

    2007-02-01

    Full Text Available In this study we determined the microclimatic drivers of storage water use in Scots pine (Pinus sylvestris L. growing in a temperate climate. The storage water use was modeled using the ANAFORE model, integrating a dynamic water flow and – storage model with a process-based transpiration model. The model was calibrated and validated with sap flow measurements for the growing season of 2000 (26 May–18 October.

    Because there was no severe soil drought during the study period, we were able to study atmospheric effects. Incoming radiation was the main driver of storage water use. The general trends of sap flow and storage water use are similar, and follow more or less the pattern of incoming radiation. Nevertheless, considerable differences in the day-to-day pattern of sap flow and storage water use were observed, mainly driven by vapour pressure deficit (VPD. During dry atmospheric conditions (high VPD storage water use was reduced. This reduction was disproportionally higher than the reduction in measured sap flow. Our results suggest that the trees did not rely more on storage water during periods of atmospheric drought, without severe soil drought.

    A third important factor was the tree water deficit. When storage compartments were depleted beyond a threshold, storage water use was limited due to the low water potential in the storage compartments. The maximum relative contribution of storage water to daily transpiration was also constrained by an increasing tree water deficit.

  11. Antioxidants in yacon products and effect of long term storage

    Directory of Open Access Journals (Sweden)

    Alejandra Castro

    2012-09-01

    Full Text Available Yacon (Smallanthus sonchifolius (Poepp. and Endl. H. Robinson is a storage root originally grown in the Andean highlands. The fresh roots are perishable and quickly turn brown during handling and processing. Aiming to prolong shelf-life and to preserve the antioxidant compounds in yacon roots, 3 mm thick yacon slices were dried in a drying cabinet at 40, 50, and 60 ºC to a moisture content of 10-14%, and yacon strips were sun dried to a moisture content of 15-20%. The total phenolic content was measured by the Folin-Ciocalteu method, and the quenching capacity was evaluated by measuring the amount of DPPH (1,1-diphenyl-2-pidrylhydrazyl inhibited in samples after drying and after 7 months of storage. The results showed that it is possible to preserve the antioxidant capacity in yacon after cabinet or sun drying. Both yacon chips and strips presented total phenolic content values similar to those of fresh yacon roots. Both products also showed a high inhibition capacity of DPPH (1,1-diphenyl-2-pidrylhydrazyl. A significant decrease in the phenolic content was observed in the yacon chips after storage, which indicates that the sun dried strips are more suitable for storage.

  12. Composition, thermotropic properties, and oxidative stability of freeze-dried and spray-dried milk fat globule membrane isolated from cheese whey.

    Science.gov (United States)

    Zhu, Dan; Damodaran, Srinivasan

    2011-08-24

    The milk fat globule membrane (MFGM) was isolated from cheese whey using a recently developed novel method. The cheese-derived MFGM contained about 17-19% lipids and 65-70% protein on a dry weight basis. About 50% of the lipids in MFGM were phospholipids. Compositional analysis of the cheese whey-derived MFGM showed that it is a rich source of phosphatidylserine, sphingomyelin, and bioactive proteins CD36, butyrophilin, xanthine oxidase, and mucin 1. Utilization of MFGM in foods as a source of nutraceutical lipids depends on its oxidative stability. In this context, the impact of drying methods, namely, freeze-drying versus spray-drying, on the storage stability of MFGM was studied. Freeze-dried (FD) and spray-dried (SD) MFGM samples were morphologically very different when examined by light microscope: The thermotropic phase transition temperature (T(m)) of lipids in the FD-MFGM was 37.8 °C, and it was 48 °C in SD-MFGM. This 10 °C difference in T(m) indicated that the drying method altered the thermodynamic state of phospholipids in MFGM. At all storage temperatures studied, the zero-order rate constant of lipid oxidation, as measured by hexanal production, was 1-2 orders of magnitude greater in the spray-dried than in the freeze-dried MFGM. The results clearly indicated that the choice of drying method affects morphological characteristics, the T(m) and oxidative stability of phospholipids in MFGM.

  13. Numerical Simulation and Experimental Study of Deep Bed Corn Drying Based on Water Potential

    Directory of Open Access Journals (Sweden)

    Zhe Liu

    2015-01-01

    Full Text Available The concept and the model of water potential, which were widely used in agricultural field, have been proved to be beneficial in the application of vacuum drying model and have provided a new way to explore the grain drying model since being introduced to grain drying and storage fields. Aiming to overcome the shortcomings of traditional deep bed drying model, for instance, the application range of this method is narrow and such method does not apply to systems of which pressure would be an influential factor such as vacuum drying system in a way combining with water potential drying model. This study established a numerical simulation system of deep bed corn drying process which has been proved to be effective according to the results of numerical simulation and corresponding experimental investigation and has revealed that desorption and adsorption coexist in deep bed drying.

  14. High moisture airtight storage of barley and triticale: Effect of moisture level and grain processing on nitrogen and phosphorus solubility

    DEFF Research Database (Denmark)

    Ton Nu, Mai Anh; Blaabjerg, Karoline; Labouriau, Rodrigo

    2015-01-01

    moisture levels (20, 23, 26 and 29% moisture) and to compare HMA storage of cereals with dry storage for 49 days. Dry stored barley and triticale (10 and 13% moisture, respectively) were kept in 10 L plastic buckets for 0 and 49 days. HMA stored cereals were kept in airtight bags (400 g per bag) at 15 °C...

  15. Influence of postharvest processing and storage conditions on key antioxidants in pūhā (Sonchus oleraceus L.)

    DEFF Research Database (Denmark)

    Ou, Zong-Quan; Schmierer, David M; Strachan, Clare J

    2014-01-01

    To investigate effects of different postharvest drying processes and storage conditions on key antioxidants in Sonchus oleraceus L. leaves.......To investigate effects of different postharvest drying processes and storage conditions on key antioxidants in Sonchus oleraceus L. leaves....

  16. Analysis of Dry Spells in Southern Italy (Calabria

    Directory of Open Access Journals (Sweden)

    Tommaso Caloiero

    2015-06-01

    Full Text Available A deficit in precipitation may impact greatly on soil moisture, snowpack, stream flow, groundwater, and reservoir storage. Among the several approaches available to analyze this phenomenon, one of the most applied is the analysis of dry spells. In this paper, an investigation of the spatial and temporal patterns of dry spells, in a region of southern Italy, has been carried out on a daily precipitation dataset. First, the frequency distributions of the sequences of dry days have been analyzed. Then, the regional areas most affected by dry events have been evaluated at annual and seasonal scale. Finally, the long-term trend of the dry spells has been estimated at annual and seasonal scale. Results show that the lower probabilities of long dry spells occur in the main reliefs of the region, while the highest values have been detected in the Ionian side. The spatial distribution of the mean and maximum length values of the dry spells evidenced a west–east gradient. The trend analysis mainly revealed a negative behavior in the duration of the dry spells at annual scale and a positive trend in the winter period.

  17. Properties of Spray Dried Food and Spray Drying Characteristics

    Science.gov (United States)

    Katoh, Fumio

    The following conclusions are obtained, studying properties of spray dried food and drying characteristics. (a) Dried particles are similar to spray droplets in size distribution (y=2.5), and particle count distribution is arranged as (dn/dx = ae-bx). (b) The ratio of the particle diameters before and after drying is calculated with moisture before and after drying, and porosity is given as (εp = ww4). (c) The standard drying method is presented to evaluate accurately drying problems at a certain standard. (d) Equilibrium moisture at 20 up to 100°C are summarized in terms of adsorption potential. (e) It makes clear that calulation based on the theory of residence time and drying time represents well complex spray drying characteristics.

  18. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... when I sleep? Feb 10, 2016 Leer en Español: ¿Qué Es el Ojo Seco? Find an Ophthalmologist ...

  19. Infrared Drying Parameter Optimization

    Science.gov (United States)

    Jackson, Matthew R.

    In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a

  20. Quality of dry ginger (Zingiber officinale) by different drying methods.

    Science.gov (United States)

    E, Jayashree; R, Visvanathan; T, John Zachariah

    2014-11-01

    Ginger rhizomes sliced to various lengths of 5, 10, 15, 20, 30, 40, 50 mm and whole rhizomes were dried from an initial moisture content of 81.3 % to final moisture content of less than 10 % by various drying methods like sun drying, solar tunnel drying and cabinet tray drying at temperatures of 50, 55, 60 and 65 °C. Slicing of ginger rhizomes significantly reduced the drying time of ginger in all the drying methods. It was observed that drying of whole ginger rhizomes under sun took the maximum time (9 days) followed by solar tunnel drying (8 days). Significant reduction in essential oil and oleoresin content of dry ginger was found as the slice length decreased. The important constituents of ginger essential oil like zingiberene, limonene, linalool, geraniol and nerolidol as determined using a gas chromatography was also found to decrease during slicing and as the drying temperature increased. The pungency constituents in the oleoresin of ginger like total gingerols and total shogoals as determined using a reverse phase high performance liquid chromatography also showed a decreasing trend on slicing and with the increase in drying temperature. It was observed from the drying studies that whole ginger rhizomes dried under sun drying or in a solar tunnel drier retained the maximum essential oil (13.9 mg/g) and oleoresin content (45.2 mg/g) of dry ginger. In mechanical drying, the drying temperature of 60 °C was considered optimum however there was about 12.2 % loss in essential oil at this temperature.

  1. Study of drying characteristics of large-cardamom

    Energy Technology Data Exchange (ETDEWEB)

    Rao, V.G.; Mande, S.; Kishore, V.V.N. [Tata Energy Research Inst., New Delhi (India)

    2001-07-01

    India is the largest producer of large-cardamom in the world with a 54% share in world production followed by Nepal (33%) and Bhutan (13%). For long-duration storage of cardamom and in order to bring out its aroma, the fresh cardamom capsules (with 80-85% moisture) has to be dried immediately after harvesting to bring down its moisture content to less than 10% (w.b.) through a curing(drying) process. Still a primitive and inefficient (operating efficiency level of about 5-15%) smoking method (using traditional bhatti) is being used for drying of large- cardamom resulting in huge (estimated 20,000 MT/yr) wastage of fuel wood and poor (charred and blackened ) quality product. This paper gives a brief description of efforts made to obtain basic drying parameters of large- cardamom (which is a pre-requisite for dryer design) under different operating conditions. (Author)

  2. Intermittent drying of beans in a spouted bed

    Directory of Open Access Journals (Sweden)

    C. A. Oliveira

    2007-12-01

    Full Text Available Carioca beans are a highly nutritious grain, in terms of the amount of protein, iron and potassium as well as carbohydrates and fiber and as a source of vitamins. The moisture content of recently picked beans is too high for good preservation and storage, resulting in the need for drying before packaging. In this work, the drying of Carioca beans in a laboratory scale spouted bed under intermittent conditions of the drying air was experimentally analyzed. Experiments carried out consisted of two types of intermittent regime: intermittence in the spout regime, referred to as spouted/fixed bed and intermittence of the air supply to the bed, called spouted bed/rest. The results were compared to those for bean drying in a spouted bed dryer without intermittence.

  3. Matrix parameters and storage conditions of manure

    Energy Technology Data Exchange (ETDEWEB)

    Weinfurtner, Karlheinz [Fraunhofer Institute for Molecular Biology and Applied Ecology (IME), Schmallenberg (Germany)

    2011-01-15

    The literature study presents an overview of storage conditions for manure and information about important matrix parameters of manure such as dry matter content, pH value, total organic carbon, total nitrogen and ammonium nitrogen. The presented results show that for matrix parameters a dissimilarity of cattle and pig manure can be observed but no difference within the species for different production types occurred with exception of calves. A scenario for western and central European countries is derived. (orig.)

  4. Storage and flood routing

    Science.gov (United States)

    Carter, R.W.; Godfrey, R.G.

    1960-01-01

    The basic equations used in flood routing are developed from the law of continuity. In each method the assumptions are discussed to enable the user to select an appropriate technique. In the stage-storage method the storage is related to the mean gage height in the reach under consideration. In the discharge-storage method the storage is determined, from weighted values of inflow and outflow discharge. In the reservoir-storage method the storage is considered as a function of outflow discharge alone. A detailed example is given for each method to illustrate that particular technique.

  5. Massive Storage Systems

    Institute of Scientific and Technical Information of China (English)

    Dan Feng; Hai Jin

    2006-01-01

    To accommodate the explosively increasing amount of data in many areas such as scientific computing and e-Business, physical storage devices and control components have been separated from traditional computing systems to become a scalable, intelligent storage subsystem that, when appropriately designed, should provide transparent storage interface, effective data allocation, flexible and efficient storage management, and other impressive features. The design goals and desirable features of such a storage subsystem include high performance, high scalability, high availability, high reliability and high security. Extensive research has been conducted in this field by researchers all over the world, yet many issues still remain open and challenging. This paper studies five different online massive storage systems and one offline storage system that we have developed with the research grant support from China. The storage pool with multiple network-attached RAIDs avoids expensive store-and-forward data copying between the server and storage system, improving data transfer rate by a factor of 2-3 over a traditional disk array. Two types of high performance distributed storage systems for local-area network storage are introduced in the paper. One of them is the Virtual Interface Storage Architecture (VISA) where VI as a communication protocol replaces the TCP/IP protocol in the system. VISA's performance is shown to achieve better than that of IP SAN by designing and implementing the vSCSI (VI-attached SCSI) protocol to support SCSI commands in the VI network. The other is a fault-tolerant parallel virtual file system that is designed and implemented to provide high I/O performance and high reliability. A global distributed storage system for wide-area network storage is discussed in detail in the paper, where a Storage Service Provider is added to provide storage service and plays the role of user agent for the storage system. Object based Storage Systems not only

  6. Solar Heating System with Building-Integrated Heat Storage

    DEFF Research Database (Denmark)

    Heller, Alfred

    1996-01-01

    Traditional solar heating systems cover between 5 and 10% of the heat demand fordomestic hot water and comfort heating. By applying storage capacity this share can beincreased much. The Danish producer of solar heating systems, Aidt-Miljø, markets such a system including storage of dry sand heated...... by PP-pipe heat exchanger. Heat demand is reduced due to direct solar heating, and due to storage. Heat demand is reduced due to direct solar heating, due to storage and due to lower heat losses through the ground. In theory, by running the system flow backwards through the sand storage, active heating...... can be achieved.The objective of the report is to present results from measured system evaluation andcalculations and to give guidelines for the design of such solar heating systems with building integrated sand storage. The report is aimed to non-technicians. In another report R-006 the main results...

  7. Study on drying rate in contact drying with flexible screen

    Institute of Scientific and Technical Information of China (English)

    王伟宏; 陆仁书; 张显权

    2000-01-01

    The moisture contents (MC) of popular veneers were tested in Composition Board Laboratory of Northeast Forestry University by contact drying with flexible screen. The influence factors considered included temperature, initial moisture contents (IMC), and veneer thickness. Veneer-drying laws under different hot press conditions were analyzed. The results showed that the drying rate increased with temperature rising. 160℃ was considered to be more efficient than 140℃ and 180℃ because excessive high temperature has no significant contribution to drying rate. IMC had significant effect on drying rate. The veneer with high IMC had a higher drying rate at above fiber saturation point (FSP) and a lower drying rate at below FSP, compared to the veneer with low IMC. Average drying rate also varied with thickness in power law.

  8. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  9. An unusually dry story

    Directory of Open Access Journals (Sweden)

    Srinivas Rajagopala

    2015-01-01

    Full Text Available We present a middle-aged woman with a prior history of central nervous system (CNS demyelinating disorder who presented with an acute onset quadriparesis and respiratory failure. The evaluation revealed distal renal tubular acidosis with hypokalemia and medullary nephrocalcinosis. Weakness persisted despite potassium correction, and ongoing evaluation confirmed recurrent CNS and long-segment spinal cord demyelination with anti-aquaporin-4 antibodies. There was no history of dry eyes or dry mouth. Anti-Sjogren′s syndrome A antigen antibodies were elevated, and there was reduced salivary flow on scintigraphy. Coexistent antiphospholipid antibody syndrome with inferior vena cava thrombosis was also found on evaluation. The index patient highlights several rare manifestations of primary Sjogren′s syndrome (pSS as the presenting features and highlights the differential diagnosis of the clinical syndromes in which pSS should be considered in the Intensive Care Unit.

  10. Drying characteristics and kinetics of fluidized bed dried potato

    OpenAIRE

    S.B. BAKAL; K.H. GEDAM; Sharma, G. P.

    2008-01-01

    In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimenta...

  11. Dry Eye Syndrome

    Directory of Open Access Journals (Sweden)

    Mohammad-Ali Javadi

    2011-01-01

    Full Text Available Our understanding of keratoconjunctivitis sicca (KCS, also known as dry eye syndrome, has been changed over recent years. Until lately, the condition was thought to be merely due to aqueous tear insufficiency. Today, it is understood that KCS is a multifactorial disorder due to inflammation of the ocular surface and lacrimal gland, neurotrophic deficiency and meibomian gland dysfunction. This change in paradigm has led to the development of new and more effective medications.

  12. Drying of complex suspensions

    OpenAIRE

    Xu, Lei; Bergés, Alexis; Lu, Peter J.; Studart, André R.; Schofield, Andrew B.; Oki, Hidekazu; Davies, Simon; Weitz, David A.

    2010-01-01

    We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates ...

  13. Experimental Evaluation of Sugar Cane Bagasse Storage in Bales System

    Directory of Open Access Journals (Sweden)

    J. Lois-Correa

    2010-12-01

    Full Text Available An experimental evaluation was carried out on three bagasse storage piles with the following characteristics: wetbaled raw bagasse, wet baled depithed bagasse and pre-dried baled depithed bagasse. In each of these formerlymentioned alternatives, the storage time influence was analyzed on temperature profile, humidity behavior,granulometry and morphology, with and without mechanical treatment, solubility in hot water, NaOH and alcoholbenzeneextractives. In the same way, the behavior of brightness in mechanical pulps produced from stored bagassewas studied. Storage losses were calculated for each alternative on the basis of obtained results and it wasdemonstrated that pre-dried bagasse as compared with wet bagasse storage, yields lower losses and betterconservation of its characteristics.

  14. KINETICS OF THIN LAYER DRYING OF POULTRY MANURE

    Directory of Open Access Journals (Sweden)

    A. E. Ghaly

    2012-01-01

    Full Text Available The poultry industry is one of the largest and fastest growing sectors of livestock production in the world. The estimated 2010 world flock was over 18 billion birds with a yearly manure output of 22 million tonnes. Storage and disposal of raw poultry manure has become an environmental problem because of the associated air, water and soil pollution. Environmental and health problems such as odor and pathogens that may arise during and after land application of raw manure can be eliminated by drying. Dried manure can be utilized as a soil conditioner to improve soil tilth and reduce the problems associated with soil compaction and as a feed for ruminants because of its high nitrogen content. The aim of this study was to investigate the kinetics of thin layer drying of poultry manure and evaluate the effects of drying with heated air on the chemical and biological properties of manure. The effects of temperature and depth of manure layer were evaluated. The profile of the moisture content of poultry manure followed an exponential decay curve. The moisture decay constant was affected by the drying temperature and the depth of the manure layer. At the three temperature levels studied, the time required to dry poultry manure in 1 cm-deep layer was the least, followed by 2 and 3 cm-deep layers, respectively. The diffusion coefficient increased with both temperature and depth of drying layer, but did not show a linear increase with either variable. The optimum depth for drying manure (at which the highest drying effectiveness occurred was 3 cm. Drying manure at 40-60°C resulted in the loss of 44-55% of the total Kjeldahl nitrogen, with losses increasing with both the temperature and depth of manure. The pH of the manure decreased from the initial value of 8.4 before drying to about 6.6 after drying. The odor analysis indicated that dried poultry manure did not have an offensive odor. Drying achieved 65.3 and 69.3% reductions in odor intensity and

  15. Dry mouth during cancer treatment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000032.htm Dry mouth during cancer treatment To use the sharing features on this page, please enable JavaScript. Some cancer treatments and medicines can cause dry mouth. Symptoms you ...

  16. Nitramine Drying & Fine Grinding Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

  17. Salted and dried Cod preserved by vacuum and modified atmosphere

    Directory of Open Access Journals (Sweden)

    Maria José Rodrigues

    2014-06-01

    Full Text Available Temperatures higher than 20ºC can boost the growth, on the salted and dried cod surface, of bacteria that present a red pigment (Rodrigues et al., 2003; Rodrigues et al., 2005. These organisms, besides the change of the food product appearance, also cause an unpleasant flavor and the product is rejected by the consumers, although does not cause any health concern. Currently, the export of salted and dried cod, to Africa, has increased and a great amount of product is rejected due to the high environmental temperature and the lack of a proper cold chain storage infrastructure. Vacuum packaging, and modified atmosphere packaging have been used for fresh and cooked seafood preservation, but, as far as the authors know, were never used to preserve salted and dried fish. In the present study it was observed the effect of vacuum packaging, packaging with 80%N2:20%CO2 and finally the addition of sodium metabisulfite on the salted and dried cod stored under temperature abuse (15ºC, 25ºC and 35ºC. Accordingly, packaging under vacum and, specially, packaging with 80%N2:20%CO2 successfuly increased the shellife of salted and dried cod . The addition of sodium metabisulfite has increased the shelflife of salted and dried cod preserved at 15ºC, but not of salted and dried cod preserved at 25ºC and 35ºC.

  18. Fuel storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Donakowski, T.D.; Tison, R.R.

    1979-08-01

    Storage technologies are characterized for solid, liquid, and gaseous fuels. Emphasis is placed on storage methods applicable to Integrated Community Energy Systems based on coal. Items discussed here include standard practice, materials and energy losses, environmental effects, operating requirements, maintenance and reliability, and cost considerations. All storage systems were found to be well-developed and to represent mature technologies; an exception may exist for low-Btu gas storage, which could have materials incompatability.

  19. ON THE QUESTION OF PROCESS CONTROL COMBINED GRAIN DRYING

    Directory of Open Access Journals (Sweden)

    Valentina Afonkina

    2016-03-01

    Full Text Available A large part of the grain produced in the South Urals has high humidity and needs to be dried before storage. Drying is an energy-intensive process and is about 70 % of the total energy consumption for post-harvest processing of grain. Modern grain drying equip¬ment, implements high-convection drying, and heat provides cost 5 350–5 500 kJ per 1 kg of evaporated moisture, which is well above the theoretical calculations. Combined drying, which involves high-temperature drying step and aeration enables to reduce heat costs up to 30 %. To control the combined drying process it is necessary that final grain moisture relates to such parameters of high-temperature drying and aeration as the initial moisture content, the temperature of grain and the time subsequent aering. The paper describes the said relation as a mathematical model of the second order obtained experi¬mentally for wheat. The model has been derived from the implementation of Box-Benkin plan for three factors – the initial grain moisture, temperature and time of grain heating and aering. The experiment was conducted for a 200 mm thick fixed grain bed. We also have got a model relating energy consumption to the said parameters. The model of the final grain moisture within the variation of factors can be used to create a control algorithm for combined drying. Taking as the set parameters final moisture, initial moisture and grain heating temperature, a microcontroller calculates the time for active aering necessary to obtain final grain moisture and an unloading mechanism provides the necessary time through regulating the discharge rate. The model makes it possible to calculate the energy usage for drying at different values of initial moisture, temperature and time of grain heating and aering.

  20. Thermal energy storage

    Science.gov (United States)

    1980-01-01

    The planning and implementation of activities associated with lead center management role and the technical accomplishments pertaining to high temperature thermal energy storage subsystems are described. Major elements reported are: (1) program definition and assessment; (2) research and technology development; (3) industrial storage applications; (4) solar thermal power storage applications; and (5) building heating and cooling applications.

  1. Pit Water Storage Ottrupgaard

    DEFF Research Database (Denmark)

    Heller, Alfred

    2000-01-01

    The pit water storage, a seasonal thermal storage, was built in 1993 with floating lid and hybrid clay-polymer for pit lining. The storage was leaking severe and solutions were to be found. In the paper solutions for pit lining and floating lids are discussed, cost estimations given and coming...

  2. Pit Water Storage Ottrupgaard

    DEFF Research Database (Denmark)

    Heller, Alfred

    2000-01-01

    The pit water storage, a seasonal thermal storage, was built in 1993 with floating lid and hybrid clay-polymer for pit lining. The storage was leaking severe and solutions were to be found. In the paper solutions for pit lining and floating lids are discussed, cost estimations given and coming...

  3. Influence of protective characteristics of packaging material on packed dried fruits

    Directory of Open Access Journals (Sweden)

    Gvozdenović Jasna J.

    2007-01-01

    Full Text Available Dried fruits are very delicate to biochemical changes during storage, due to low water content, as well as low aw value. The shelf life of these products depends on aw value. Materials for dry fruits packaging are necessary to have appropriate barrier characteristics for water, oxygen, nitrogen and carbon dioxide molecules, as well as for electromagnetic rays, especially those with low wavelengths in UV region. During storage of packed dry fruits, qualitative changes, influenced by different packaging materials, may occur. The results of tested characteristics of different packaging materials, combination and their barrier features, as well as the qualitative changes of packaged dried apples are presented in this paper. The qualitative changes of color and sensory characteristics of packaged dried apples point out to influence of the type, combination as well as the barrier features of used packaging materials. .

  4. Cold Vacuum Drying (CVD) Facility Technical Safety Requirements

    Energy Technology Data Exchange (ETDEWEB)

    KRAHN, D.E.

    2000-08-08

    The Technical Safety Requirements (TSRs) for the Cold Vacuum Drying Facility define acceptable conditions, safe boundaries, bases thereof, and management or administrative controls required to ensure safe operation during receipt of multi-canister overpacks (MCOs) containing spent nuclear fuel. removal of free water from the MCOs using the cold vacuum drying process, and inerting and testing of the MCOs before transport to the Canister Storage Building. Controls required for public safety, significant defense in depth, significant worker safety, and for maintaining radiological and toxicological consequences below risk evaluation guidelines are included.

  5. Fluid flow in drying drops

    NARCIS (Netherlands)

    Gelderblom, H.

    2013-01-01

    When a suspension drop evaporates, it leaves behind a drying stain. Examples of these drying stains encountered in daily life are coffee or tea stains on a table top, mineral rings on glassware that comes out of the dishwasher, or the salt deposits on the streets in winter. Drying stains are also pr

  6. Microwave drying of granules containing a moisture-sensitive drug: a promising alternative to fluid bed and hot air oven drying.

    Science.gov (United States)

    Chee, Sze Nam; Johansen, Anne Lene; Gu, Li; Karlsen, Jan; Heng, Paul Wan Sia

    2005-07-01

    The impact of microwave drying and binders (copolyvidone and povidone) on the degradation of acetylsalicylic acid (ASA) and physical properties of granules were compared with conventional drying methods. Moist granules containing ASA were prepared using a high shear granulator and dried with hot air oven, fluid bed or microwave (static or dynamic bed) dryers. Percent ASA degradation, size and size distribution, friability and flow properties of the granules were determined. Granules dried with the dynamic bed microwave dryer showed the least amount of ASA degradation, followed by fluid bed dryer, static bed microwave oven and hot air oven. The use of microwave drying with a static granular bed adversely affected ASA degradation and drying capability. Dynamic bed microwave dryer had the highest drying capability followed by fluid bed, static bed microwave dryer and conventional hot air oven. The intensity of microwave did not affect ASA degradation, size distribution, friability and flow properties of the granules. Mixing/agitating of granules during drying affected the granular physical properties studied. Copolyvidone resulted in lower amount of granular residual moisture content and ASA degradation on storage than povidone, especially for static bed microwave drying. In conclusion, microwave drying technology has been shown to be a promising alternative for drying granules containing a moisture-sensitive drug.

  7. Measurements of Fundamental Fluid Physics of SNF Storage Canisters

    Energy Technology Data Exchange (ETDEWEB)

    Condie, Keith Glenn; Mc Creery, Glenn Ernest; McEligot, Donald Marinus

    2001-09-01

    With the University of Idaho, Ohio State University and Clarksean Associates, this research program has the long-term goal to develop reliable predictive techniques for the energy, mass and momentum transfer plus chemical reactions in drying / passivation (surface oxidation) operations in the transfer and storage of spent nuclear fuel (SNF) from wet to dry storage. Such techniques are needed to assist in design of future transfer and storage systems, prediction of the performance of existing and proposed systems and safety (re)evaluation of systems as necessary at later dates. Many fuel element geometries and configurations are accommodated in the storage of spent nuclear fuel. Consequently, there is no one generic fuel element / assembly, storage basket or canister and, therefore, no single generic fuel storage configuration. One can, however, identify generic flow phenomena or processes which may be present during drying or passivation in SNF canisters. The objective of the INEEL tasks was to obtain fundamental measurements of these flow processes in appropriate parameter ranges.

  8. PENGERTING SUHU RENDAH UNTUK MENJAGA MUTU BAHAN PERTANIAN [Low Temperature Drying to Maintain the Quality of Agricultural Products

    Directory of Open Access Journals (Sweden)

    R Sarwono

    2005-08-01

    Full Text Available Drying equipment is an important unit operation in industrial processes. Reducing moisture content in order to prolog the storage time is very commonly used. There are many agricultural product which are very heat sensitive. To maintain the essential ingredient in those product, drying process should be applied at low temperature drying process gave lower drying rate, is time consuming and in general costly. Increasing drying rate by reducing the absolute humidity is this recommended. There are many ways to dry the air, firstly moisture is condensed in evaporator and then dried air is heated in condenser. Is conducted if the drying system in connected with heat pump system. Secondly, moisture is absorbed by hygroscopic materials such as CaO. Water absorbed and reacted with CaO become Ca(OH2 in exothermic reaction, and simultaneously dried air is heated.

  9. Terrestrial Planets Accreted Dry

    Science.gov (United States)

    Albarede, F.; Blichert-Toft, J.

    2007-12-01

    Plate tectonics shaped the Earth, whereas the Moon is a dry and inactive desert. Mars probably came to rest within the first billion years of its history, and Venus, although internally very active, has a dry inferno for its surface. The strong gravity field of a large planet allows for an enormous amount of gravitational energy to be released, causing the outer part of the planetary body to melt (magma ocean), helps retain water on the planet, and increases the pressure gradient. The weak gravity field and anhydrous conditions prevailing on the Moon stabilized, on top of its magma ocean, a thick buoyant plagioclase lithosphere, which insulated the molten interior. On Earth, the buoyant hydrous phases (serpentines) produced by reactions between the terrestrial magma ocean and the wet impactors received from the outer Solar System isolated the magma and kept it molten for some few tens of million years. The elemental distributions and the range of condensation temperatures show that the planets from the inner Solar System accreted dry. The interior of planets that lost up to 95% of their K cannot contain much water. Foundering of their wet surface material softened the terrestrial mantle and set the scene for the onset of plate tectonics. This very same process may have removed all the water from the surface of Venus 500 My ago and added enough water to its mantle to make its internal dynamics very strong and keep the surface very young. Because of a radius smaller than that of the Earth, not enough water could be drawn into the Martian mantle before it was lost to space and Martian plate tectonics never began. The radius of a planet therefore is the key parameter controlling most of its evolutional features.

  10. Short communication: The effect of liquid storage on the flavor of whey protein concentrate.

    Science.gov (United States)

    Park, Curtis W; Parker, Megan; Drake, MaryAnne

    2016-06-01

    Unit operations in dried dairy ingredient manufacture significantly influence sensory properties and, consequently, their use and consumer acceptance in a variety of ingredient applications. In whey protein concentrate (WPC) manufacture, liquid can be stored as whey or WPC before spray drying. The objective of this study was to determine the effect of storage, composition, and bleaching on the flavor of spray-dried WPC80. Liquid whey was manufactured and subjected to the following treatments: bleached or unbleached and liquid whey or liquid WPC storage. The experiment was replicated 3 times and included a no-storage control. All liquid storage was performed at 4°C for 24h. Flavor of the final spray-dried WPC80 was evaluated by a trained panel and volatile compound analyses. Storage of liquids increased cardboard flavor, decreased sweet aromatic flavor, and resulted in increased volatile lipid oxidation products. Bleaching altered the effect of liquid storage. Storage of unbleached liquid whey decreased sweet aromatic flavor and increased cardboard flavor and volatile lipid oxidation products compared with liquid WPC80 and no storage. In contrast, storage of bleached liquid WPC decreased sweet aromatic flavor and increased cardboard flavor and associated volatile lipid oxidation products compared with bleached liquid whey or no storage. These results confirm that liquid storage increases off-flavors in spray-dried protein but to a variable degree, depending on whether bleaching has been applied. If liquid storage is necessary, bleached WPC80 should be stored as liquid whey and unbleached WPC80 should be stored as liquid WPC to mitigate off-flavors.

  11. Cloud storage for dummies

    CERN Document Server

    Xu, Linda; Loughlin, Tanya

    2010-01-01

    Understand cloud computing and save your organization time and money! Cloud computing is taking IT by storm, but what is it and what are the benefits to your organization? Hitachi Data Systems' Cloud Storage For Dummies provides all the answers, With this book, you discover a clear explanation of cloud storage, and tips for how to choose the right type of cloud storage for your organization's needs. You also find out how cloud storage can free up valuable IT resources, saving time and money. Cloud Storage For Dummies presents useful information on setting up a

  12. Characterization of freeze dried egg melange long stored after irradiation

    Science.gov (United States)

    Bakalivanov, Stefan; Tsvetkova, Eli; Bakalivanova, Todorka; Tsvetkov, Tsvetan; Kaloyanov, Nikolay; Grigorova, Stoyanka; Alexieva, Vanja

    2008-01-01

    During the 4-year period of storage at room temperature of the freeze-dried (control group) and the freeze-dried and gamma-irradiated (2.0 and 3.5 kGy) whole hen's egg mélange, no significant changes were found into the sensory and functional characteristics till the 28th month. The change in the number of SH groups was not unidirectional up to the 28th month and then it started to decrease in all investigated samples. During the entire period of investigation the amount of malondialdehyde in all three groups of egg mélange was considerably below the allowed limit for foodstuffs. The most significant fractions of the protein spectra showed a general tendency of decrease during the storage.

  13. The Predication of Relationship Between Harvesting Moisture Content and The Most Convenient Rice Moisture After Drying to Obtained The Highest Head Rice Yield When Rice is Dried in Drying Machine

    Directory of Open Access Journals (Sweden)

    P. Ulger

    2006-09-01

    Full Text Available Rice is dried after harvesting and milled before consumption. But cracklings occur on rice while rice isbeing dried with hot weather. Depending on cracking amount milling rice yield will be high or low. In orderto minimize breakage during the drying process, the relationship between harvesting grain moisture contentand storage moisture content was examined. Thus the highest head rice yield could be obtained. For thatobject , rice samples that were harvested in different harvested moisture content, were dried with hot weatherin prototype dryer which was designed for this object. Rice samples were dried to different moisture andhead rice yield was predicated after drying process , thus the moisture of dried rice which was obtainedmaximum head rice yield was found.According to the data, relationship between harvesting moisture content and the moisture of dried rice onprototypes drying machine is significant as statistical. A regression equation was obtained with data fromdrying process. With this equation, the most convenient moisture to obtained highest head rice yield afterdrying can be predicted. “The most convenient rice moisture after drying =( 4.66 + 0.59 x Harvestingmoisture content±0.54”.

  14. Dry EEG Electrodes

    Directory of Open Access Journals (Sweden)

    M. A. Lopez-Gordo

    2014-07-01

    Full Text Available Electroencephalography (EEG emerged in the second decade of the 20th century as a technique for recording the neurophysiological response. Since then, there has been little variation in the physical principles that sustain the signal acquisition probes, otherwise called electrodes. Currently, new advances in technology have brought new unexpected fields of applications apart from the clinical, for which new aspects such as usability and gel-free operation are first order priorities. Thanks to new advances in materials and integrated electronic systems technologies, a new generation of dry electrodes has been developed to fulfill the need. In this manuscript, we review current approaches to develop dry EEG electrodes for clinical and other applications, including information about measurement methods and evaluation reports. We conclude that, although a broad and non-homogeneous diversity of approaches has been evaluated without a consensus in procedures and methodology, their performances are not far from those obtained with wet electrodes, which are considered the gold standard, thus enabling the former to be a useful tool in a variety of novel applications.

  15. Solar drying and agribusiness

    Directory of Open Access Journals (Sweden)

    Sebastiana del Monserrate Ruiz Cedeño

    2016-07-01

    Full Text Available Agribusinesses are the livelihoods of rural populations, but when production increase, many products are damaged and lose their commercial value due to lack of conservation treatments at a local level. Agricultural production represents the foundation of economic development of the province of Manabi. A significant level of agricultural products is lost due to lack of conservation technologies. Solar drying is a way of conserving by dehydration of some products such as: vegetables, fruits, aromatic and medicinal plants. This can be achieved by a process of proper conservation that is conducive to reduce losses using technologies easy to build, as are the different types of solar dryers which are already used in different parts of the South American region. This article proposes to introduce solar-drying technology in agricultural areas of the province of Manabi. And thereby achieve the regaining of different products that today are lost, incorporating new and attractive, marketable lines based on agricultural products naturally dehydrated with a high nutritionalvalue, capable of contributing to human health not only in the province but also in the country.

  16. Three dimensional deformation of dry-stored complete denture base at room temperature

    Science.gov (United States)

    2016-01-01

    PURPOSE The aim of this study was to evaluate whether there is any typical deformation pattern existing in complete denture when it was dried by using the 3D scanner and surface matching program. MATERIALS AND METHODS A total of 28 denture bases were fabricated with heat curing acrylic resin (each 14 upper and lower denture bases), and 14 denture bases (each 7 upper and lower denture bases) were stored in the water bottle (water stored), and another 14 denture bases were stored in the air (dry stored). Each specimen was scanned at 1st day after deflasking, 14th day after deflasking, and 28th day after deflasking, and digitalized. Three dimensional deformation patterns were acquired by comparison of the data within storage group using surface matching program. For evaluating differences between groups, these data were compared statisticallyusing Kruskal Wallis and Mann Whitney-U test (α=.05). RESULTS When evaluating 3D deformation of denture base, obvious deformations were not found in maxillary and mandibular water storage group. However, in dry stored group, typical deformation pattern was detected as storage time passes. It occurred mostly in first two weeks. Major deformations were found in the bilateral posterior area in both maxillary and mandibular group. In maxillary dry stored group, a statistical significance was found. CONCLUSION It was proved that in both upper and lower denture bases, dry storage caused more dimensional deformation than water storage with typical pattern. PMID:27555899

  17. Seed storage behavior of forest tree species seeds

    Directory of Open Access Journals (Sweden)

    Marcela Carlota Nery

    2014-09-01

    Full Text Available Seeds of five forest species were classified according to their physiological storage behavior. Seeds of Casearia sylvestris Swart (Salicaceae, Qualea grandiflora Mart. (Vochysiaceae, Guarea kunthiana A. Juss. (Meliaceae, Eremanthus incanus Less. (Asteraceae, Protium heptaphyllum March. (Burseraceae were collected and taken to the laboratory, where they were processed and submitted to both rapid and slow drying, storage and assayed for viability. After physiological classification regarding storage behavior, it was observed that seeds of C. sylvestris and E. incanus presented orthodox behavior. Seeds of G. kunthiana and P. heptaphyllum were classified as recalcitrant and Q. grandiflora as an intermediate, which did not tolerate low moisture content.

  18. Light-assisted drying (LAD) of small volume biologics: a comparison of two IR light sources

    Science.gov (United States)

    Young, Madison A.; Van Vorst, Matthew; Elliott, Gloria D.; Trammell, Susan R.

    2016-03-01

    Protein therapeutics have been developed to treat diseases ranging from arthritis and psoriasis to cancer. A challenge in the development of protein-based drugs is maintaining the protein in the folded state during processing and storage. We are developing a novel processing method, light-assisted drying (LAD), to dehydrate proteins suspended in a sugar (trehalose) solution for storage at supra-zero temperatures. Our technique selectively heats the water in small volume samples using near-IR light to speed dehydration which prevents sugar crystallization that can damage embedded proteins. In this study, we compare the end moisture content (EMC) as a function of processing time of samples dried with two different light sources, Nd:YAG (1064 nm) and Thulium fiber (1850 nm) lasers. EMC is the ratio of water to dry weight in a sample and the lower the EMC the higher the possible storage temperature. LAD with the 1064 and 1850 nm lasers yielded 78% and 65% lower EMC, respectively, than standard air-drying. After 40 minutes of LAD with 1064 and 1850 nm sources, EMCs of 0.27+/-.27 and 0.15+/-.05 gH2O/gDryWeight were reached, which are near the desired value of 0.10 gH2O/gDryWeight that enables storage in a glassy state without refrigeration. LAD is a promising new technique for the preparation of biologics for anhydrous preservation.

  19. Annex D-200 Area Interim Storage Area Final Safety Analysis Report [FSAR] [Section 1 & 2

    Energy Technology Data Exchange (ETDEWEB)

    CARRELL, R D

    2002-07-16

    The 200 Area Interim Storage Area (200 Area ISA) at the Hanford Site provides for the interim storage of non-defense reactor spent nuclear fuel (SNF) housed in aboveground dry cask storage systems. The 200 Area ISA is a relatively simple facility consisting of a boundary fence with gates, perimeter lighting, and concrete and gravel pads on which to place the dry storage casks. The fence supports safeguards and security and establishes a radiation protection buffer zone. The 200 Area ISA is nominally 200,000 ft{sup 2} and is located west of the Canister Storage Building (CSB). Interim storage at the 200 Area ISA is intended for a period of up to 40 years until the materials are shipped off-site to a disposal facility. This Final Safety Analysis Report (FSAR) does not address removal from storage or shipment from the 200 Area ISA. Three different SNF types contained in three different dry cask storage systems are to be stored at the 200 Area ISA, as follows: (1) Fast Flux Test Facility Fuel--Fifty-three interim storage casks (ISC), each holding a core component container (CCC), will be used to store the Fast Flux Test Facility (FFTF) SNF currently in the 400 Area. (2) Neutron Radiography Facility (NRF) TRIGA'--One Rad-Vault' container will store two DOT-6M3 containers and six NRF TRIGA casks currently stored in the 400 Area. (3) Commercial Light Water Reactor Fuel--Six International Standards Organization (ISO) containers, each holding a NAC-I cask4 with an inner commercial light water reactor (LWR) canister, will be used for commercial LWR SNF from the 300 Area. An aboveground dry cask storage location is necessary for the spent fuel because the current storage facilities are being shut down and deactivated. The spent fuel is being transferred to interim storage because there is no permanent repository storage currently available.

  20. Dry aging of beef; Review.

    Science.gov (United States)

    Dashdorj, Dashmaa; Tripathi, Vinay Kumar; Cho, Soohyun; Kim, Younghoon; Hwang, Inho

    2016-01-01

    The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with 0° to 4 °C and with relative humidity of 75 to 80 %. However there are various opinions on dry aging procedures and purveyors of such products are passionate about their programs. Recently, there has been an increased interest in dry aging process by a wider array of purveyors and retailers in the many countries. Dry aging process is very costly because of high aging shrinkage (6 to15 %), trims loss (3 to 24 %), risk of contamination and the requirement of highest grades meat with. The packaging in highly moisture-permeable bag may positively impact on safety, quality and shelf stability of dry aged beef. The key effect of dry aging is the concentration of the flavor that can only be described as "dry-aged beef". But the contribution of flavor compounds of proteolysis and lipolysis to the cooked dry aged beef flavor is not fully known. Also there are limited scientific studies of aging parameters on the quality and palatability of dry aged beef.

  1. Dry ice blasting

    Science.gov (United States)

    Lonergan, Jeffrey M.

    1992-04-01

    As legal and societal pressures against the use of hazardous waste generating materials has increased, so has the motivation to find safe, effective, and permanent replacements. Dry ice blasting is a technology which uses CO2 pellets as a blasting medium. The use of CO2 for cleaning and stripping operations offers potential for significant environmental, safety, and productivity improvements over grit blasting, plastic media blasting, and chemical solvent cleaning. Because CO2 pellets break up and sublime upon impact, there is no expended media to dispose of. Unlike grit or plastic media blasting which produce large quantities of expended media, the only waste produced by CO2 blasting is the material removed. The quantity of hazardous waste produced, and thus the cost of hazardous waste disposal is significantly reduced.

  2. Design of Tomato Drying System by Utilizing Brine Geothermal

    Science.gov (United States)

    Afuar, W.; Sibarani, B.; Abdurrahman, G.; Hendrarsakti, J.

    2016-09-01

    Cultivation of tomato plants in Indonesia has been started since 1961.Tomatoes generally will rot in three days if left on storage. Moreover, low quality tomatoes have cheaper price. After harvested, tomatoes need to be treated by drying process so it can last longer. Energy for drying tomatoes can be obtained by utilizing heat from geothermal brine. Purpose of this research is to design a tomato drying system by extracting heat of geothermal brine from separator with certain flow rate to heat up water by using a heat exchanger. Furthermore, this water will be used to heat up the surrounding air which is circulated by blower system to heat up the tomatoes chamber. Tomatoes drying process needs temperature range of 50-70°C to evaporate water content from 95.7% to 26%. After that treatment, the tomatoes are expected to have better durability. The objective of this study is to determine the quantity of hot brine which is needed for drying tomatoes and to design a drying system so that tomatoes can last longer.

  3. Extended Storage for Research and Test Reactor Spent Fuel for 2006 and Beyond

    Energy Technology Data Exchange (ETDEWEB)

    Hurt, William Lon; Moore, K.M.; Shaber, Eric Lee; Mizia, Ronald Eugene

    1999-10-01

    This paper will examine issues associated with extended storage of a variety of spent nuclear fuels. Recent experiences at the Idaho National Engineering and Environmental Laboratory and Hanford sites will be described. Particular attention will be given to storage of damaged or degraded fuel. The first section will address a survey of corrosion experience regarding wet storage of spent nuclear fuel. The second section will examine issues associated with movement from wet to dry storage. This paper also examines technology development needs to support storage and ultimate disposition.

  4. Influence of microencapsulation and spray drying on the viability of Lactobacillus and Bifidobacterium strains.

    Science.gov (United States)

    Goderska, Kamila; Czarnecki, Zbigniew

    2008-01-01

    Improved production methods of starter cultures, which constitute the most important element of probiotic preparations, were investigated. The aim of the presented research was to analyse changes in the viability of Lactobacillus. acidophilus and Bifidobacterium bifidum after stabilization (spray drying, liophilization, fluidization drying) and storage in refrigerated conditions for 4 months. The highest numbers of live cells, up to the fourth month of storage in refrigerated conditions, of the order of 10(7) cfu/g preparation were recorded for the B. bifidum DSM 20239 bacteria in which the N-Tack starch for spray drying was applied. Fluidization drying of encapsulated bacteria allowed obtaining a preparation of the comparable number of live bacterial cells up to the fourth month of storage with those encapsulated bacteria, which were subjected to freeze-drying but the former process was much shorter. The highest survivability of the encapsulated L. acidophilus DSM 20079 and B. bifidum DSM 20239 cells subjected to freeze-drying was obtained using skimmed milk as the cryoprotective substance. Stabilization of bacteria by microencapsulation can give a product easy to store and apply to produce dried food composition.

  5. Airtight storage of moist wheat grain improves bioethanol yields

    Directory of Open Access Journals (Sweden)

    Piens Kathleen

    2009-08-01

    Full Text Available Abstract Background Drying is currently the most frequently used conservation method for cereal grain, which in temperate climates consumes a major part of process energy. Airtight storage of moist feed grain using the biocontrol yeast Pichia anomala as biopreservation agent can substantially reduce the process energy for grain storage. In this study we tested the potential of moist stored grain for bioethanol production. Results The ethanol yield from moist wheat was enhanced by 14% compared with the control obtained from traditionally (dry stored grain. This enhancement was observed independently of whether or not P. anomala was added to the storage system, indicating that P. anomala does not impair ethanol fermentation. Starch and sugar analyses showed that during pre-treatment the starch of moist grain was better degraded by amylase treatment than that of the dry grain. Additional pre-treatment with cellulose and hemicellulose-degrading enzymes did not further increase the total ethanol yield. Sugar analysis after this pre-treatment showed an increased release of sugars not fermentable by Saccharomyces cerevisiae. Conclusion The ethanol yield from wheat grain is increased by airtight storage of moist grain, which in addition can save substantial amounts of energy used for drying the grain. This provides a new opportunity to increase the sustainability of bioethanol production.

  6. New datasets to estimate terrestrial water storage change

    NARCIS (Netherlands)

    Troch, P.A.; Durcik, M.; Seneviratne, S.; Hirschi, M.; Teuling, A.J.; Hurkmans, R.T.W.L.; Hasan, S.

    2007-01-01

    The total amount of water stored in a river basin affects streamflow at various timescales and defines the river basin's response to atmospheric forcing. For example, spring runoff in mountainous midlatitude catchments depends on winter snowpack, and groundwater storage sustains flow during dry peri

  7. Near-Infrared Imaging for High-Throughput Screening of Moisture-Induced Changes in Freeze-Dried Formulations

    DEFF Research Database (Denmark)

    Trnka, Hjalte; Palou, Anna; Panouillot, Pierre Emanuel

    2014-01-01

    formulations were freeze-dried in well plates. Samples were imaged with a NIR hyperspectral camera after freeze-drying and upon storage. On the basis of Karl Fischer titration reference values, a univariate quantification model was constructed and used to visualize the distribution of water within freeze......Evaluation of freeze-dried biopharmaceutical formulations requires careful analysis of multiple quality attributes. The aim of this study was to evaluate the use of near-infrared (NIR) imaging for fast analysis of water content and related physical properties in freeze-dried formulations. Model...... drying was observed within the samples after 3 days of storage. Further investigations with X-ray powder diffraction confirmed this local drying to be related to crystallization of sucrose. The combination of fast analysis of water content and spatial solid-state information makes NIR imaging a powerful...

  8. Dried fruit and dental health.

    Science.gov (United States)

    Sadler, Michèle Jeanne

    2016-12-01

    A comprehensive review of the literature has found that the common perceptions that dried fruits are "sticky", adhere to teeth, and are detrimental to dental health on account of their sugar content are based on weak evidence. There is a lack of good quality scientific data to support restrictive advice for dried fruit intake on the basis of dental health parameters and further research is required. A number of potentially positive attributes for dental health, such as the need to chew dried fruits which encourages salivary flow, and the presence of anti-microbial compounds and of sorbitol, also require investigation to establish the extent of their effects and whether they balance against any potentially negative attributes of dried fruit. Advice on dried fruit consumption should also take account of the nutritional benefits of dried fruit, being high in fibre, low in fat and containing useful levels of micronutrients.

  9. Aflatoxin contamination of dried red chilies: Contrasts between the United States and Nigeria, two markets differing in regulation enforcement

    Science.gov (United States)

    Dried red chilies are among the world’s most consumed spices. From farm to fork, chilies go through cropping, harvest, drying, processing and storage. Chilies are susceptible to infection by aflatoxin producing fungi and subsequent contamination by aflatoxins at every stage. Aflatoxins are highly re...

  10. Atomic Storage States

    Institute of Scientific and Technical Information of China (English)

    汪凯戈; 朱诗尧

    2002-01-01

    We present a complete description of atomic storage states which may appear in the electromagnetically induced transparency (EIT). The result shows that the spatial coherence has been included in the atomic collective operators and the atomic storage states. In some limits, a set of multimode atomic storage states has been established in correspondence with the multimode Fock states of the electromagnetic field. This gives a better understanding of the fact that, in BIT, the optical coherent information can be preserved and recovered.

  11. Spacecraft Energy Storage Systems

    OpenAIRE

    Robinson, Wilf; Hanks, James; Spina, Len; Havenhill, Doug; Gisler, Gary; Ginter, Steve; Brault, Sharon

    1997-01-01

    Flywheel Energy Storage Systems represent an exciting alternative to traditional battery storage systems used to power satellites during periods of eclipse. The increasing demand for reliable communication and data access is driving explosive growth in the number of satellite systems being developed as well as their performance requirements. Power on orbit is the key to this performance, and batteries are becoming increasingly unattractive as an energy storage media. Flywheel systems offer ve...

  12. Storage and handling of willow from short rotation coppice

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P. D.; Spinelli, R.

    1997-07-01

    During the project two main storage and drying trials were organised. The first trial in 1996 consisted of 14 piles of 6 different size material (whole shoots, via 200 mm chunk, 100 mm chunk, 50 mm chip, 28 mm chips, 25 mm chips) and six different methods of covering: Open air storage, storage under plastic cover, storage under top-cover, airtight storage, unventilated storage under roof, and intermittent ventilation (cooling) under roof. The drying trial in 1997 which consisted of four piles was established in Horsens in the same building as the ventilated trials the year before. Only Austoft 50 mm chips were used for this trial. The four piles were established in February and removed in May. Based on all the results of the trials the following conclusions can be drawn: Storage of willow from short rotation coppice is very difficult. Fine chips, such as producted by the two main harvesting machines Claas and Austoft are not suitable for storage over prolonged periods of time (more than 2 months); fine chips loose a large amount of dry matter and a lot of their lower heating value; fine chips also have a heavy infestation of micro-organisms which might cause working environment problems; short rotation coppice is best delivered straight into the heating plants during harvest; if short rotation coppice has to be stored, then this should be done as whole shoots or large chunk; if short rotation coppice has to be stored as chips for a longer period of time (more than two months), then these chips should be sealed airtight as silage. (EG) EFP-94; EFP-95; EFP-96. 10 refs.

  13. Convective drying of sludge cake

    Science.gov (United States)

    Chen, Jianbo; Peng, Xiaofeng; Xue, Yuan; Lee, Duujong; Chu, Chingping

    2002-08-01

    This paper presented an experimental study on convective drying of waste water sludge collected from Beijing GaoBeiDian Sewage Treatment Plant, particularly on the correlation between the observed shrinkage dynamics of sludge cake and the drying curve. During the initial stage of drying the process resembles to that of a particulate bed, in which moisture diffuses and evaporates at the upper surface. Conventional drying theory assuming a diffusion-evaporating front interprets this period of drying. Consequently, owing to the very large shrinkage ratio of the dried cake, cracks emerges and propagates on and within the cake body, whence inducing evaporating channel that facilitates the water removal. This occurrence compensates the reduction of surface area for evaporation, whence extending the constant-rate period during the test. Afterwards, the cracks meet with each other and form isolated cake piles, while the subsequent drying occur mainly within these piles and the conventional theory fails. The transition between the drying on a plain cake layer and that on the isolated piles demonstrates the need to adopt distinct descriptions on these two regimes of drying for the sludge cake.

  14. Effects of Different Storage Conditions on the Nutritional Qualities of Barley and Maize

    OpenAIRE

    POLAT, Havva Eylem

    2015-01-01

    The effects of different types of storage on nutritional quality values of barley and maize are examined. For this purpose, 3 different storage types, including horizontal-reinforced concrete storage, vertical-reinforced concrete silo and verticalsteel silo were taken into consideration. Nutritional quality values (dry matter, crude protein, crude fat, crude fiber, crude ash, and metabolizable energy) of samples were analyzed in the laboratory in four replicates. Total of 438 samples were col...

  15. Spray drying for preservation of erythrocytes: effect of atomization on hemolysis.

    Science.gov (United States)

    McLean, Mary; Han, Xiao-Yue; Higgins, Adam Z

    2013-04-01

    Spray drying has the potential to enable storage of erythrocytes at room temperature in the dry state. The spray drying process involves atomization of a liquid into small droplets and drying of the droplets in a gas stream. In this short report, we focus on the atomization process. To decouple atomization from drying, erythrocyte suspensions were sprayed with a two-fluid atomizer nozzle using humid nitrogen as the atomizing gas. The median droplet size was less than 100 μm for all of the spray conditions investigated, indicating that the suspensions were successfully atomized. Hemolysis was significantly affected by the hematocrit of the erythrocyte suspension, the suspension flow rate, and the atomizing gas flow rate (pspray drying may be a feasible option for erythrocyte biopreservation.

  16. Proteomic Comparison between Maturation Drying and Prematurely Imposed Drying of Zea mays Seeds Reveals a Potential Role of Maturation Drying in Preparing Proteins for Seed Germination, Seedling Vigor, and Pathogen Resistance

    DEFF Research Database (Denmark)

    Wang, Wei-Qing; Ye, Jian-Qing; Rogowska-Wrzesinska, Adelina

    2014-01-01

    abundant in this group and may contribute to the acquisition of seed germinability. However, a relatively large number of proteins changed in the embryo (47 spots) and endosperm (76 spots) specifically during maturation drying. Among these proteins, storage proteins in the embryo and defense proteins...... in the endosperm may be particularly important for seedling vigor and resistance to fungal infection, respectively....

  17. Drying Spirulina with Foam Mat Drying at Medium Temperature

    Directory of Open Access Journals (Sweden)

    Aji Prasetyaningrum

    2012-10-01

    Full Text Available Spirulina is a single cell blue green microalgae (Cyanobacteria containing many Phytonutrients (Beta-carotene, Chlorophyl, Xanthophyl, Phyocianin using as anti-carcinogen in food. Producing dry spirulina by quick drying process at medium temperature is very important to retain the Phytonutrient quality. Currently, the work is still challenging due to the gel formation that block the water diffusion from inside to the surface.  This research studies the performance of foam-mat drying on production of dry spirulina. In this method the spirulina was mixed with foaming agent (glair/egg albumen, popular as white egg at 2.5% by weight at air velocity 2.2 m/sec. Here, the effect of spirulina thickness and operational temperature on drying time and quality (Beta-carotene and color were observed. The drying time was estimated based on the measurement of water content in spirulina versus time. Result showed that the thicker spirulina, the longer drying time. Conversely, the higher operational temperature, faster drying time. At thickness ranging 1-3 mm and operational temperature below 70oC, the quality of spirulina can fit the market requirement

  18. Carrageenan drying with dehumidified air: drying characteristics and product quality

    NARCIS (Netherlands)

    Djaeni, M.; Sasongko, S.B.; Prasetyaningrum, Aji A A.A.; Jin, X.; Boxtel, van A.J.B.

    2012-01-01

    Applying dehumidified air is considered as an option to retain quality in carrageenan drying. This work concerns the effects of operational temperature, air velocity, and carrageenan thickness on the progress of drying and product quality when using dehumidified air. Final product quality and progre

  19. A new storage-ring light source

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Alex [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-06-01

    A recently proposed technique in storage ring accelerators is applied to provide potential high-power sources of photon radiation. The technique is based on the steady-state microbunching (SSMB) mechanism. As examples of this application, one may consider a high-power DUV photon source for research in atomic and molecular physics or a high-power EUV radiation source for industrial lithography. A less challenging proof-of-principle test to produce IR radiation using an existing storage ring is also considered.

  20. DRYING OF POULTRY MANURE FOR USE AS ANIMAL FEED

    Directory of Open Access Journals (Sweden)

    A. E. Ghaly

    2012-01-01

    Full Text Available The poultry industry is one of the largest and fastest growing sectors of livestock production in the world. The estimated 2010 world flock was over 18 billion birds with a yearly manure output of 22 million tonnes. Storage and disposal of raw poultry manure have become an environmental problem because of the associated air, water and soil pollution. Environmental and health problems such as odor and pathogens that may arise during and after land application of raw manure can be eliminated by drying. Dried manure can be utilized as a feed for ruminants because of its high nitrogen content. The aim of this study was to investigate the effects of drying temperature and depth, as well as the nutritional profile of dried manure and its suitability as an animal feed. Dried poultry manure contained sufficient levels of digestible energy, crude fiber, crude protein, crude fat, cobalt and iodine. Although dried poultry manure did not meet the dietary requirements for calcium, chloride, magnesium, phosphorus, potassium, sodium, copper, iron, manganese, selenium, sulfur or zinc it could be used as a feed stuff for ruminants after supplementation with the required nutrients. Heated air drying was most efficient at 60°C and at a depth of 3 cm. During drying poultry manure decreased in pH (8.4-6.9, protein content (43 to 39-43% and amino acid content. The greatest reductions in microbial population occurred at the highest temperature (60°C and the lowest manure depth (1cm. Reductions in the number of bacteria, mold/yeast and E. coli were 65-99, 74-99 and 99.97% respectively, Salmonellae was not detected in the dried product. Dried poultry manure was found to have a non-offensive odor. Odor intensity and offensiveness were reduced by 65 and 69% respectively during drying. Thin layer heated air drying of poultry manure between 40 and 60°C created a safe and nutritionally appropriate feed for ruminants.

  1. Staying dry under water

    Science.gov (United States)

    Jones, Paul; Cruz-Chu, Eduardo; Megaridis, Constantine; Walther, Jens; Koumoutsakos, Petros; Patankar, Neelesh

    2012-11-01

    Lotus leaves are known for their non-wetting properties due to the presence of surface texture. The superhydrophobic behavior arises because of the prevention of liquid water from entering the pores of the roughness. Present superhydrophobic materials rely on air trapped within the surface pores to avoid liquid permeation. This is typically unsustainable for immersed bodies due to dissolution of the air, especially under elevated pressures. Here, molecular dynamics simulations are used to demonstrate the non-wetting behavior of an immersed ten-nanometer pore. This is accomplished by establishing thermodynamically sustained vapor pockets of the surrounding liquid medium. Over 300,000 atoms were used to construct the nanopore geometry and simulate SPC/E water molecules. Ambient pressure was varied along two isotherms (300 K, and 500 K). This approach for vapor-stabilization could offer valuable guidance for maintaining surfaces dry even in a submerged state without relying on trapped air. The approach may be extended to control general phase behavior of water adjacent to textured surfaces. ISEN support is gratefully acknowledged.

  2. Forward Osmosis Brine Drying

    Science.gov (United States)

    Flynn, Michael; Shaw, Hali; Hyde, Deirdre; Beeler, David; Parodi, Jurek

    2015-01-01

    The Forward Osmosis Brine Drying (FOBD) system is based on a technique called forward osmosis (FO). FO is a membrane-based process where the osmotic potential between brine and a salt solution is equalized by the movement of water from the brine to the salt solution. The FOBD system is composed of two main elements, the FO bag and the salt regeneration system. This paper discusses the results of testing of the FO bag to determine the maximum water recovery ratio that can be attained using this technology. Testing demonstrated that the FO bag is capable of achieving a maximum brine water recovery ratio of the brine of 95%. The equivalent system mass was calculated to be 95 kg for a feed similar to the concentrated brine generated on the International Space Station and 86 kg for an Exploration brine. The results have indicated that the FOBD can process all the brine for a one year mission for between 11% to 10% mass required to bring the water needed to make up for water lost in the brine if not recycled. The FOBD saves 685 kg and when treating the International Space Station brine and it saves 829 kg when treating the Exploration brine. It was also demonstrated that saturated salt solutions achieve a higher water recovery ratios than solids salts do and that lithium chloride achieved a higher water recovery ratio than sodium chloride.

  3. Sessile nanofluid droplet drying.

    Science.gov (United States)

    Zhong, Xin; Crivoi, Alexandru; Duan, Fei

    2015-03-01

    Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier-Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.

  4. Groundwater and Terrestrial Water Storage

    Science.gov (United States)

    Rodell, Matthew; Chambers, Don P.; Famiglietti, James S.

    2011-01-01

    Most people think of groundwater as a resource, but it is also a useful indicator of climate variability and human impacts on the environment. Groundwater storage varies slowly relative to other non-frozen components of the water cycle, encapsulating long period variations and trends in surface meteorology. On seasonal to interannual timescales, groundwater is as dynamic as soil moisture, and it has been shown that groundwater storage changes have contributed to sea level variations. Groundwater monitoring well measurements are too sporadic and poorly assembled outside of the United States and a few other nations to permit direct global assessment of groundwater variability. However, observational estimates of terrestrial water storage (TWS) variations from the GRACE satellites largely represent groundwater storage variations on an interannual basis, save for high latitude/altitude (dominated by snow and ice) and wet tropical (surface water) regions. A figure maps changes in mean annual TWS from 2009 to 2010, based on GRACE, reflecting hydroclimatic conditions in 2010. Severe droughts impacted Russia and the Amazon, and drier than normal weather also affected the Indochinese peninsula, parts of central and southern Africa, and western Australia. Groundwater depletion continued in northern India, while heavy rains in California helped to replenish aquifers that have been depleted by drought and withdrawals for irrigation, though they are still below normal levels. Droughts in northern Argentina and western China similarly abated. Wet weather raised aquifer levels broadly across western Europe. Rains in eastern Australia caused flooding to the north and helped to mitigate a decade long drought in the south. Significant reductions in TWS seen in the coast of Alaska and the Patagonian Andes represent ongoing glacier melt, not groundwater depletion. Figures plot time series of zonal mean and global GRACE derived non-seasonal TWS anomalies (deviation from the mean of

  5. Impact of the freeze-drying process on product appearance, residual moisture content, viability, and batch uniformity of freeze-dried bacterial cultures safeguarded at culture collections.

    Science.gov (United States)

    Peiren, Jindrich; Hellemans, Ann; De Vos, Paul

    2016-07-01

    In this study, causes of collapsed bacterial cultures in glass ampoules observed after freeze-drying were investigated as well as the influence of collapse on residual moisture content (RMC) and viability. Also, the effect of heat radiation and post freeze-drying treatments on the RMC was studied. Cake morphologies of 21 bacterial strains obtained after freeze-drying with one standard protocol could be classified visually into four major types: no collapse, porous, partial collapse, and collapse. The more pronounced the collapse, the higher residual moisture content of the freeze-dried product, ranging from 1.53 % for non-collapsed products to 3.62 % for collapsed products. The most important cause of collapse was the mass of the inserted cotton plug in the ampoule. Default cotton plugs with a mass between 21 and 30 mg inside the ampoule did not affect the viability of freeze-dried Aliivibrio fischeri LMG 4414(T) compared to ampoules without cotton plugs. Cotton plugs with a mass higher than 65 mg inside the ampoule induced a full collapsed product with rubbery look (melt-back) and decreasing viability during storage. Heat radiation effects in the freeze-drying chamber and post freeze-drying treatments such as exposure time to air after freeze-drying and manifold drying time prior to heat sealing of ampoules influenced the RMC of freeze-dried products. To produce uniform batches of freeze-dried bacterial strains with intact cake structures and highest viabilities, inserted cotton plugs should not exceed 21 mg per ampoule. Furthermore, heat radiation effects should be calculated in the design of the primary drying phase and manifold drying time before heat sealing should be determined as a function of exposure time to air.

  6. Wind-energy storage

    Science.gov (United States)

    Gordon, L. H.

    1980-01-01

    Program SIMWEST can model wind energy storage system using any combination of five types of storage: pumped hydro, battery, thermal, flywheel, and pneumatic. Program is tool to aid design of optional system for given application with realistic simulation for further evaluation and verification.

  7. Energy Storage Economics

    Energy Technology Data Exchange (ETDEWEB)

    Elgqvist, Emma M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    This presentation provides an overview on energy storage economics including recent market trends, battery terminology and concepts, value streams, challenges, and an example of how photovoltaics and storage can be used to lower demand charges. It also provides an overview of the REopt Lite web tool inputs and outputs.

  8. Viscous property of dried clay

    Institute of Scientific and Technical Information of China (English)

    XU Li-sheng; LI Jian-zhong

    2006-01-01

    One dimensional and triaxial compression tests of air-dried and oven-dried Fujinomori clay and Pisa clay were carried out. Water content is less than 4.5 % and 1.0% for air-dried and oven-dried clay specimens, respectively. In all tests, axial strain rate was changed stepwise many times and drained creep tests were performed several times during monotonic loading at a constant strain rate. Global unloading (and also reloading in some tests) was applied during which creep loading tests were performed several times. Cyclic loading with small stress amplitude and several cycles was also performed to calculate the modulus of elasticity of the clay in tests. Local displacement transducer was used in triaxial compression test to increase measuring accuracy of axial strain. The results show that air-dried and oven-dried clay have noticeable viscous properties; during global unloading, creep deformation changes from positive to negative, i.e. there exist neutral points (zero creep deformation or no creep deformation point) in global unloading part of strain-stress curve; viscous property of Fujinomori clay decreases when water content decreases, i.e. viscous property of air-dried Fujinomori clay is more significant than that of oven-dried Fujinomori clay.

  9. Microwave Drying of Moist Coals

    Science.gov (United States)

    Salomatov, Vl. V.; Karelin, V. A.; Sladkov, S. O.; Salomatov, Vas. V.

    2017-03-01

    Physical principles and examples of practical implementation of drying large bodies of coal by microwave radiation are considered. It is shown that energy consumption in microwave drying of brown coals decreases to 1.5-1.8 (kW·h)/ kg as compared with traditional types of drying, for which the expenditures of energy amount to 3.0 (kW·h)/kg. In using microwave drying, the technological time of drying decreases to 4 h, whereas the time of convective drying, with other things being equal, comes to 8-20 h. Parallel with microwave radiation drying, grinding of a fuel takes place, as well as entrainment of such toxic and ecologically harmful elements as mercury, chlorine, phosphorus, sulfur, and nitrogen. An analysis of the prospects of using a microwave energy for drying coal fuel has shown that microwave radiation makes it possible to considerably economize in energy, increase explosional safety, improve the ecological situation, and reduce the metal content and overall dimensions of the equipment.

  10. Thermal storage heaters

    Energy Technology Data Exchange (ETDEWEB)

    Stokes, K.H.; Broadbent, J.T.

    1991-02-27

    A storage heater, providing heat by radiation, comprises an internal circuit for the passage of heated air. The heater comprises: a heat storage core, comprising heat storage rods heated by resistance wiring, and an air space around the rods, the air space forming an inner pathway of circuit; heat insulation around the core; and outer pathways adjacent outer walls of the heater. A damper is arranged at the top of the inner and outer pathways to control the communication between. The damper may be movably supported on a support part by robust bi-metallic strips wound with heater wires to control the bending of the strips. The storage heater may be supplied in kit form for the purchaser to assemble and to this end the heat storage rods may comprise particulate material poured into tubes, or liftable core units. Further heat insulation may be selectively positioned in the outer pathways to provide an even heat distribution. (author).

  11. Electricity Storage. Technology Brief

    Energy Technology Data Exchange (ETDEWEB)

    Simbolotti, G. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development ENEA, Rome (Italy); Kempener, R. [International Renewable Energy Agency IRENA, Bonn (Germany)

    2012-04-15

    Electricity storage is a key technology for electricity systems with a high share of renewables as it allows electricity to be generated when renewable sources (i.e. wind, sunlight) are available and to be consumed on demand. It is expected that the increasing price of fossil fuels and peak-load electricity and the growing share of renewables will result in electricity storage to grow rapidly and become more cost effective. However, electricity storage is technically challenging because electricity can only be stored after conversion into other forms of energy, and this involves expensive equipment and energy losses. At present, the only commercial storage option is pumped hydro power where surplus electricity (e.g. electricity produced overnight by base-load coal or nuclear power) is used to pump water from a lower to an upper reservoir. The stored energy is then used to produce hydropower during daily high-demand periods. Pumped hydro plants are large-scale storage systems with a typical efficiency between 70% and 80%, which means that a quarter of the energy is lost in the process. Other storage technologies with different characteristics (i.e. storage process and capacity, conversion back to electricity and response to power demand, energy losses and costs) are currently in demonstration or pre-commercial stages and discussed in this brief report: Compressed air energy storage (CAES) systems, Flywheels; Electrical batteries; Supercapacitors; Superconducting magnetic storage; and Thermal energy storage. No single electricity storage technology scores high in all dimensions. The technology of choice often depends on the size of the system, the specific service, the electricity sources and the marginal cost of peak electricity. Pumped hydro currently accounts for 95% of the global storage capacity and still offers a considerable expansion potential but does not suit residential or small-size applications. CAES expansion is limited due to the lack of suitable

  12. Seasonal thermal energy storage

    Science.gov (United States)

    Allen, R. D.; Kannberg, L. D.; Raymond, J. R.

    1984-05-01

    Seasonal thermal energy storage (STES) using heat or cold available from surplus, waste, climatic, or cogeneration sources show great promise to reduce peak demand, reduce electric utility load problems, and contribute to establishing favorable economics for district heating and cooling systems. Heated and chilled water can be injected, stored, and recovered from aquifers. Geologic materials are good thermal insulators, and potentially suitable aquifers are distributed throughout the United States. Potential energy sources for use in an aquifer thermal energy storage system include solar heat, power plant cogeneration, winter chill, and industrial waste heat source. Topics covered include: (1) the U.S. Department of Energy seasonal thermal energy storage program; (2) aquifer thermal energy storage technology; (3) alternative STES technology; (4) foreign studies in seasonal thermal energy storage; and (5) economic assessment.

  13. Storage resource manager

    Energy Technology Data Exchange (ETDEWEB)

    Perelmutov, T.; Bakken, J.; Petravick, D.; /Fermilab

    2004-12-01

    Storage Resource Managers (SRMs) are middleware components whose function is to provide dynamic space allocation and file management on shared storage components on the Grid[1,2]. SRMs support protocol negotiation and reliable replication mechanism. The SRM standard supports independent SRM implementations, allowing for a uniform access to heterogeneous storage elements. SRMs allow site-specific policies at each location. Resource Reservations made through SRMs have limited lifetimes and allow for automatic collection of unused resources thus preventing clogging of storage systems with ''orphan'' files. At Fermilab, data handling systems use the SRM management interface to the dCache Distributed Disk Cache [5,6] and the Enstore Tape Storage System [15] as key components to satisfy current and future user requests [4]. The SAM project offers the SRM interface for its internal caches as well.

  14. Plutonium storage criteria

    Energy Technology Data Exchange (ETDEWEB)

    Chung, D. [Scientech, Inc., Germantown, MD (United States); Ascanio, X. [Dept. of Energy, Germantown, MD (United States)

    1996-05-01

    The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less than 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.

  15. Development and Experimental Benchmark of Simulations to Predict Used Nuclear Fuel Cladding Temperatures during Drying and Transfer Operations

    Energy Technology Data Exchange (ETDEWEB)

    Greiner, Miles [Univ. of Nevada, Reno, NV (United States)

    2017-03-31

    Radial hydride formation in high-burnup used fuel cladding has the potential to radically reduce its ductility and suitability for long-term storage and eventual transport. To avoid this formation, the maximum post-reactor temperature must remain sufficiently low to limit the cladding hoop stress, and so that hydrogen from the existing circumferential hydrides will not dissolve and become available to re-precipitate into radial hydrides under the slow cooling conditions during drying, transfer and early dry-cask storage. The objective of this research is to develop and experimentallybenchmark computational fluid dynamics simulations of heat transfer in post-pool-storage drying operations, when high-burnup fuel cladding is likely to experience its highest temperature. These benchmarked tools can play a key role in evaluating dry cask storage systems for extended storage of high-burnup fuels and post-storage transportation, including fuel retrievability. The benchmarked tools will be used to aid the design of efficient drying processes, as well as estimate variations of surface temperatures as a means of inferring helium integrity inside the canister or cask. This work will be conducted effectively because the principal investigator has experience developing these types of simulations, and has constructed a test facility that can be used to benchmark them.

  16. Drying Characteristics of Garcinia atroviridis

    Directory of Open Access Journals (Sweden)

    Waigoon RITTIRUT

    2006-01-01

    Full Text Available Some physical and chemical properties of fresh garcinia fruits are reported. The most suitable drying conditions for garcinia material in a tray dryer based on the final moisture content were determined by extensive testing. It was found that for the material thickness of 2, 4 and 6 mm, a temperature of 55 °C and air velocity of 1.2 m/s are suitable for drying. The most suitable time where the final moisture content met the commercial standard was found to be 199, 256 and 427 min, respectively. The higher the temperature, the shorter the drying time. It was also observed that the suitable drying time for 2-mm thick material and air velocity of 1.2 m/s was 199, 159 and 99 min for drying temperature of 55, 65 and 75 °C, respectively. Drying characteristics are also reported. Most of the drying rate curves appear in a falling rate period except at low temperature and low velocity of operation parameters i.e. 55 °C and 0.5 m/s for 4-mm thick material, where the constant drying rate is approximately 0.09 kg water/min.m2. The sorption isotherm is sigmoidal shape at 30 °C and monolayer moisture content is 14.78 kg water/100 kg dry solid. Soaking material in 1.5 and 3.0 %w/w sodium chloride did not affect the drying rate. Effective moisture diffusivities were evaluated to be  5.57´10-10, 6.94´10-10 and 1.11´10-9 m2/s at temperatures 55, 65 and 75 °C, respectively.

  17. Space and Industrial Brine Drying Technologies

    Science.gov (United States)

    Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

    2014-01-01

    This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

  18. Stochastic analysis of long dry spells in Calabria (Southern Italy)

    Science.gov (United States)

    Sirangelo, B.; Caloiero, T.; Coscarelli, R.; Ferrari, E.

    2017-02-01

    A deficit in precipitation may impact greatly on soil moisture, snowpack, streamflow, groundwater and reservoir storage. Among the several approaches available to investigate this phenomenon, one of the most applied is the analysis of dry spells. In this study, a non-homogeneous Poisson model has been applied to a set of high-quality daily rainfall series, recorded in southern Italy (Calabria region) during the period 1981-2010, for the stochastic analysis of dry spells. Firstly, some statistical details of the Poisson models were presented. Then, the proposed model has been applied to the analysis of long dry spells. In particular, a Monte Carlo technique was performed to reproduce the characteristics of the process. As a result, the main characteristics of the long dry spells have shown patterns clearly related to some geographical features of the study area, such as elevation and latitude. The results obtained from the stochastic modelling of the long dry spells proved that the proposed model is useful for the probability evaluation of drought, thus improving environmental planning and management.

  19. Drying of α-amylase by spray drying and freeze-drying - a comparative study

    Directory of Open Access Journals (Sweden)

    S. S. de Jesus

    2014-09-01

    Full Text Available This study is aimed at comparing two traditional methods of drying of enzymes and at verifying the efficiency of each one and their advantages and disadvantages. The experiments were performed with a laboratory spray dryer and freeze-dryer using α-amylase as the model enzyme. An experimental design in star revealed that spray drying is mainly influenced by the inlet air temperature and feed flow rate, which were considered to be the main factors influencing the enzymatic activity and water activity; the long period of material exposure to high temperatures causes a partial activity loss. In the experiments of freeze drying, three methods of freezing were used (freezer, acetone and dry ice, and liquid nitrogen and samples subsequently freeze-dried for times ranging between 0-24 hours. The product obtained from the two techniques showed high enzymatic activity and low water activity. For the drying of heat-resistant enzymes, in which the product to be obtained does not have high added value, spray drying may be more economically viable because, in the freeze drying process, the process time can be considered as a limiting factor when choosing a technique.

  20. Drying kinetics of barley grains and effects on the germination index

    Directory of Open Access Journals (Sweden)

    Maiara Aparecida Bomfim SOARES

    Full Text Available Abstract This study aimed to assess the drying kinetics of barley grains and, using mathematical modeling, to evaluate the diffusivity during drying and after drying to evaluate the effect of high drying temperatures on the seed germination index for malt production. Three drying temperatures 40, 60 and 80°C were used. The last two, 60 and 80°C, reached moisture close to ideal for storage with 6 and 4 hours respectively; at 40°C, drying process took 12 hours and would still take additional hours to reach 13% moisture on a dry basis. Drying temperature influenced the germination power. The protein content was reduced according to increased drying time. The diffusivity coefficient was higher in conventional than in intermittent drying, probably due to heat loss in the intermittent process. It was observed that higher the temperature higher is the diffusivity. Ks values of the Omoto model ranged from 1.07 to 2.05E-4.

  1. Secure Storage Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2015-01-01

    The purpose of this report is to clarify the challenges associated with storage for secure enclaves. The major focus areas for the report are: - review of relevant parallel filesystem technologies to identify assets and gaps; - review of filesystem isolation/protection mechanisms, to include native filesystem capabilities and auxiliary/layered techniques; - definition of storage architectures that can be used for customizable compute enclaves (i.e., clarification of use-cases that must be supported for shared storage scenarios); - investigate vendor products related to secure storage. This study provides technical details on the storage and filesystem used for HPC with particular attention on elements that contribute to creating secure storage. We outline the pieces for a a shared storage architecture that balances protection and performance by leveraging the isolation capabilities available in filesystems and virtualization technologies to maintain the integrity of the data. Key Points: There are a few existing and in-progress protection features in Lustre related to secure storage, which are discussed in (Chapter 3.1). These include authentication capabilities like GSSAPI/Kerberos and the in-progress work for GSSAPI/Host-keys. The GPFS filesystem provides native support for encryption, which is not directly available in Lustre. Additionally, GPFS includes authentication/authorization mechanisms for inter-cluster sharing of filesystems (Chapter 3.2). The limitations of key importance for secure storage/filesystems are: (i) restricting sub-tree mounts for parallel filesystem (which is not directly supported in Lustre or GPFS), and (ii) segregation of hosts on the storage network and practical complications with dynamic additions to the storage network, e.g., LNET. A challenge for VM based use cases will be to provide efficient IO forwarding of the parallel filessytem from the host to the guest (VM). There are promising options like para-virtualized filesystems to

  2. Aflatoxins & Safe Storage

    Directory of Open Access Journals (Sweden)

    Philippe eVillers

    2014-04-01

    Full Text Available The paper examines both field experience and research on the prevention of the exponential growth of aflatoxins during multi-month post harvest storage in hot, humid countries. The approach described is the application of modern safe storage methods using flexible, Ultra Hermetic™ structures that create an unbreatheable atmosphere through insect and microorganism respiration alone, without use of chemicals, fumigants, or pumps. Laboratory and field data are cited and specific examples are given describing the uses of Ultra Hermetic storage to prevent the growth of aflatoxins with their significant public health consequences. Also discussed is the presently limited quantitative information on the relative occurrence of excessive levels of aflatoxin (>20 ppb before versus after multi-month storage of such crops as maize, rice and peanuts when under high humidity, high temperature conditions and, consequently, the need for further research to determine the frequency at which excessive aflatoxin levels are reached in the field versus after months of post-harvest storage. The significant work being done to reduce aflatoxin levels in the field is mentioned, as well as its probable implications on post harvest storage. Also described is why, with some crops such as peanuts, using Ultra Hermetic storage may require injection of carbon dioxide or use of an oxygen absorber as an accelerant. The case of peanuts is discussed and experimental data is described.

  3. Evaluation of bioactive compounds and bioactivities of soybean dried by different methods and conditions.

    Science.gov (United States)

    Niamnuy, Chalida; Nachaisin, Mali; Laohavanich, Juckamas; Devahastin, Sakamon

    2011-12-01

    Soybean has attracted significant research and commercial interests due to its many health-promoting bioactive compounds, especially isoflavones (β-glucosides, malonyl-β-glucosides, acetyl-β-glucosides and aglycones). Isoflavones possess antioxidant activity and α-glucosidase inhibitory activity, which has proved effective in the treatment of type 2 diabetes mellitus. Prior to its use, however, soybean needs to be dried to extend its storage life and to prepare the material for subsequent food or pharmaceutical processing. The present study investigated the effects of drying methods and conditions on the drying characteristics, isoflavones, antioxidant activity and α -glucosidase inhibitory activity of dried soybean. Hot-air fluidized bed drying (HAFBD), superheated-steam fluidized bed drying (SSFBD) and gas-fired infrared combined with hot air vibrating drying (GFIR-HAVD) were carried out at various drying temperatures (50, 70, 130 and150°C). The results showed that higher drying temperatures led to higher drying rates and higher levels of β-glucosides and antioxidant activity, but to lower levels of malonyl-β-glucosides, acetyl-β-glucosides and total isoflavones. At the same drying temperature GFIR-HAVD resulted in the highest drying rates and the highest levels of β-glucosides, aglycones and total isoflavones, antioxidant activity as well as α-glucosidase inhibitory activity of dried soybean. A drying temperature of 130°C gave the highest levels of aglycones and α-glucosidase inhibitory activity in all cases. The relationships between all the studied parameters were monitored and simple correlations between them were determined. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Drying of thin colloidal films

    Science.gov (United States)

    Routh, Alexander F.

    2013-04-01

    When thin films of colloidal fluids are dried, a range of transitions are observed and the final film profile is found to depend on the processes that occur during the drying step. This article describes the drying process, initially concentrating on the various transitions. Particles are seen to initially consolidate at the edge of a drying droplet, the so-called coffee-ring effect. Flow is seen to be from the centre of the drop towards the edge and a front of close-packed particles passes horizontally across the film. Just behind the particle front the now solid film often displays cracks and finally the film is observed to de-wet. These various transitions are explained, with particular reference to the capillary pressure which forms in the solidified region of the film. The reasons for cracking in thin films is explored as well as various methods to minimize its effect. Methods to obtain stratified coatings through a single application are considered for a one-dimensional drying problem and this is then extended to two-dimensional films. Different evaporative models are described, including the physical reason for enhanced evaporation at the edge of droplets. The various scenarios when evaporation is found to be uniform across a drying film are then explained. Finally different experimental techniques for examining the drying step are mentioned and the article ends with suggested areas that warrant further study.

  5. No Heat Spray Drying Technology

    Energy Technology Data Exchange (ETDEWEB)

    Beetz, Charles [ZoomEssence, Inc., Hebron, KY (United States)

    2016-06-15

    No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. In short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.

  6. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel Morrison

    2005-09-14

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2005 through June 30, 2005. During this time period efforts were directed toward (1) GSTC administration changes, (2) participating in the American Gas Association Operations Conference and Biennial Exhibition, (3) issuing a Request for Proposals (RFP) for proposal solicitation for funding, and (4) organizing the proposal selection meeting.

  7. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2007-06-30

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2007 through June 30, 2007. Key activities during this time period included: (1) Organizing and hosting the 2007 GSTC Spring Meeting; (2) Identifying the 2007 GSTC projects, issuing award or declination letters, and begin drafting subcontracts; (3) 2007 project mentoring teams identified; (4) New NETL Project Manager; (5) Preliminary planning for the 2007 GSTC Fall Meeting; (6) Collecting and compiling the 2005 GSTC project final reports; and (7) Outreach and communications.

  8. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2007-03-31

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created - the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January1, 2007 through March 31, 2007. Key activities during this time period included: {lg_bullet} Drafting and distributing the 2007 RFP; {lg_bullet} Identifying and securing a meeting site for the GSTC 2007 Spring Proposal Meeting; {lg_bullet} Scheduling and participating in two (2) project mentoring conference calls; {lg_bullet} Conducting elections for four Executive Council seats; {lg_bullet} Collecting and compiling the 2005 GSTC Final Project Reports; and {lg_bullet} Outreach and communications.

  9. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2006-05-10

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January 1, 2006 through March 31, 2006. Activities during this time period were: (1) Organize and host the 2006 Spring Meeting in San Diego, CA on February 21-22, 2006; (2) Award 8 projects for co-funding by GSTC for 2006; (3) New members recruitment; and (4) Improving communications.

  10. Cassava Sun Drying Performance on Various Surfaces and Drying ...

    African Journals Online (AJOL)

    a raw material in the production of starch, tapioca and snack foods ... The material was dried for 8 hours daily after which it was kept indoors overnight. The surface with .... statistical package (MS Office, 2007). .... preservation and marketing.

  11. EFFECT OF DRYING CONDITIONS ON MUSHROOM QUALITY

    Directory of Open Access Journals (Sweden)

    MANOJ KULSHRESHTHA

    2009-03-01

    Full Text Available Fluidized bed drying of mushroom was undertaken to study the drying characteristics and quality of the dried mushrooms. Drying was done at drying air temperatures of 50, 70, and 90oC and air velocities of 1.71 and 2.13 m/s. Two batch sizes, namely, 0.5 kg and 1 kg of sliced milky mushrooms were dried. Drying characteristics and the quality of dried mushrooms were analyzed. The results indicated that the drying time decreased only marginally with increase in air velocity. Drying air temperature of 50oC was better as it resulted in a dried product having better rehydration characteristics, lesser shrinkage and lighter color. Highest energy efficiency (79.74% was observed while drying a batch size of 1 kg at a drying air temperature of 50oC, using an air velocity of 1.7 m/s.

  12. Tiered Storage For LHC

    CERN Document Server

    CERN. Geneva; Hanushevsky, Andrew

    2012-01-01

    For more than a year, the ATLAS Western Tier 2 (WT2) at SLAC National Accelerator has been successfully operating a two tiered storage system based on Xrootd's flexible cross-cluster data placement framework, the File Residency Manager. The architecture allows WT2 to provide both, high performance storage at the higher tier to ATLAS analysis jobs, as well as large, low cost disk capacity at the lower tier. Data automatically moves between the two storage tiers based on the needs of analysis jobs and is completely transparent to the jobs.

  13. Energy Storage Criteria Handbook.

    Science.gov (United States)

    1982-10-01

    using latent heat storage , as are the more elaborate simulation methods such as TRNSYS . I 0 S 168 7.6 Symbols Used Main Symbols Cp heat capacity in Btu... Storage Purpose Review chapter 7, read section 14.1.1, and for more precise calcula- tions, refer to DOE-I or TRNSYS . A simpler method of analyzing...with sensible heat storage . An analysis method such as TRNSYS , DOE-I or f-Chart would be used to estimate the system performance. System performance

  14. Production response of lactating cows fed dried versus wet brewers' grain in diets with similar dry matter content.

    Science.gov (United States)

    Dhiman, T R; Bingham, H R; Radloff, H D

    2003-09-01

    Twenty-four Holstein-Friesian dairy cows (20 intact and 4 fitted with rumen cannula) during early lactation (56 +/- 25.3 d in milk) were assigned to two treatments to determine intake and production responses to feeding dried and wet brewers' grain. There were two cows fitted with a rumen cannula in each treatment. Cows were fed a total mixed ration twice daily containing either dried or wet brewers' grain at 15% of the dietary dry matter (DM). The diet contained 47% forage and 53% concentrate. The experimental design was a replicated 2 x 2 Latin square with two periods of 5 wk each. First 2 wk in each period were considered as adaptation to diets and data from the last 3 wk were used for treatment comparisons. Dried and wet brewers' diets contained 68.0 and 66.5% DM, respectively. Feeding brewers' grain dry or wet to dairy cows had no influence on feed intake (25.6 vs. 25.1 kg/d), fat corrected milk yield (40.1 vs. 40.7 kg/d), milk composition and feed consumption. The pH, ammonia, total volatile fatty acids and molar ratios of volatile fatty acids in the rumen fluid were not different between treatments. Fatty acid composition of milk fat from cows fed diets containing dry or wet brewers' grain was identical, except C18:2 and C18:3 fatty acids were lower in milk fat from cows fed wet brewers' grain compared with dried brewers' grain. The results from the present study suggest that the performance of cows fed either dried or wet brewers' grain at 15% of dietary DM was similar when diets had the same DM. The average price for dried and wet brewers' grain in the United States from July 2001 to June 2002 was dollars 145.3 and dollars 96.9/metric tonne DM, respectively. Using wet instead of dried brewers' grain will save dollars 49/metric tonne minus the difference in storage costs. Wet brewers' grain can be fed to dairy cows in areas that are close to the brewery and provides nutritive value similar to the dried brewers' grain.

  15. Natural wind drying of willow stems

    NARCIS (Netherlands)

    Gigler, J.K.; Loon, van W.K.P.; Berg, van den J.V.; Sonneveld, C.; Meerdink, G.

    2000-01-01

    The process of natural wind drying of willow (Salix viminalis) stems in large piles was investigated. A simple drying model was developed for stems. Large-scale drying experiments were conducted and drying data were statistically analysed. Whether drying in a pile of willow stems was uniform was inv

  16. A Mathematical Model for Freeze-Drying

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the experiments on freeze-drying carrot and potato slabs, the effects of some parameters, such as heating temperature and pressure on the freeze-drying process are examined. A simple model of freeze-drying is established to predict drying time and the mass variations of materials during the drying. The experimental results agree well with those calculated by the model.

  17. Test Plan for the Boiling Water Reactor Dry Cask Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, Samuel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lindgren, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    The thermal performance of commercial nuclear spent fuel dry storage casks are evaluated through detailed numerical analysis . These modeling efforts are completed by the vendor to demonstrate performance and regulatory compliance. The calculations are then independently verified by the Nuclear Regulatory Commission (NRC). Carefully measured data sets generated from testing of full sized casks or smaller cask analogs are widely recognized as vital for validating these models. Recent advances in dry storage cask designs have significantly increased the maximum thermal load allowed in a cask in part by increasing the efficiency of internal conduction pathways and by increasing the internal convection through greater canister helium pressure. These same vertical, canistered cask systems rely on ventilation between the canister and the overpack to convect heat away from the canister to the environment for both above and below-ground configurations. While several testing programs have been previously conducted, these earlier validation attempts did not capture the effects of elevated helium pressures or accurately portray the external convection of above-ground and below-ground canistered dry cask systems. The purpose of the investigation described in this report is to produce a data set that can be used to test the validity of the assumptions associated with the calculations presently used to determine steady-state cladding temperatures in modern vertical, canistered dry cask systems. The BWR cask simulator (BCS) has been designed in detail for both the above-ground and below-ground venting configurations. The pressure vessel representing the canister has been designed, fabricated, and pressure tested for a maximum allowable pressure (MAWP) rating of 24 bar at 400 deg C. An existing electrically heated but otherwise prototypic BWR Incoloy-clad test assembly is being deployed inside of a representative storage basket and cylindrical pressure vessel that represents the

  18. Study of Ultra-drying on Vigor and Physiological Characteristics of Lespedeza bicolor Seeds

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Ultra-drying (in a desiccator with silica gel) and accelerated aging (50 oC, 30 d) of Lespedeza bicolor seeds from the arid and semiarid areas of northwest China were studied. The results showed that in the moisture content of seed ( 43?70 g/kg), germination percentage and vigor indices had no significant differences; ultra-dried seeds had a stronger anti-aging ability than those with natural drying, and the best MC for the storage was 43 g/kg. Therefore, it was feasible to store L. bicolor seeds with ultra...

  19. Structural design of concrete storage pads for spent-fuel casks

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, Y.R.; Nickell, R.E.; James, R.J. (ANATECH Research Corp., San Diego, CA (United States))

    1993-04-01

    The loading experienced by spent fuel dry storage casks and storage pads due to potential drop or tip-over accidents is evaluated using state-of-the-art concrete structural analysis methodology. The purpose of this analysis is to provide simple design charts and formulas so that design adequacy of storage pads and dry storage casks can be demonstrated. The analysis covers a wide range of slab-design parameters, e.g., reinforcement ratio, slab thickness, concrete compressive strength, and sub-base soil compaction, as well as variations in drop orientation and drop height. The results are presented in the form of curves, giving the force on the cask as a function of storage pad hardness for various drop heights. In addition, force-displacement curves, deformed shapes, crack patterns, stresses and strains are given for various slab-design conditions and drop events. The utility of the results in design are illustrated through examples.

  20. Development of operational criteria for the interim spent fuel storage facility

    Energy Technology Data Exchange (ETDEWEB)

    Kim, M. H.; Kim, J. C.; Kim, D. K.; Cho, D. K.; Bae, K. M. [Kyunghee Univ., Seoul (Korea, Republic of)

    1997-03-15

    The final objective is to develop the technical criteria for the facility operation of the interim spent fuel storage facility. For this purpose, elementary technical issues are evaluated for the wet storage of spent fuels and status of operation in foreign counties are examined. Urgent objective of this study is to provide technical back data for the development of operational criteria. For the back data for the development of operational criteria, domestic technical data for the wet storages are collected as well as standards and criteria related to the spent fuel storage. Operational stutus of spent fuel storages in foreign countries CLAB in Sweden and MRS in the United States are studied. Dry storage concept is also studied in order to find the characteristics of wet storage concept. Also basic technical issues are defined and studied in order to build a draft of operational criteri00.