Reclamation of abandoned mined lands along th Upper Illinois Waterway using dredged material

Energy Technology Data Exchange (ETDEWEB)

Van Luik, A; Harrison, W

1982-01-01

Sediments were sampled and characterized from 28 actual or proposed maintenance-dredging locations in the Upper Illinois Waterway, that is, the Calumet-Sag Channel, the Des Plaines River downstream of its confluence with the Calumet-Sag Channel, and the Illinois River from the confluence of the Kankakee and Des Plaines rivers to Havana, Illinois. Sufficient data on chemical constituents and physical sediments were obtained to allow the classification of these sediments by currently applicable criteria of the Illinois Environmental Protection Agency for the identification of hazardous, persistent, and potentially hazardous wastes. By these criteria, the potential dredged materials studied were not hazardous, persistent, or potentially hazardous; they are a suitable topsoil/ reclamation medium. A study of problem abandoned surface-mined land sites (problem lands are defined as being acidic and/or sparsely vegetated) along the Illinois River showed that three sites were particularly well suited to the needs of the Corps of Engineers (COE) for a dredged material disposal/reclamation site. Thes sites were a pair of municipally owned sites in Morris, Illinois, and a small corporately owned site east of Ottawa, Illinois, and adjacent to the Illinois River. Other sites were also ranked as to suitability for COE involvement in their reclamation. Reclamation disposal was found to be an economically competitive alternative to near-source confined disposal for Upper Illinois Waterway dredged material.

Dispersion of suspended material from an operating sand suction dredge in the Øresund (Denmark)

DEFF Research Database (Denmark)

Kiørboe, Thomas; Møhlenberg, F.

1981-01-01

The concentration of suspended material in the immediate vicinity of an operating sand suction dredge in the Oresund was 3-5000mg/l. Concentrations > 100 mg/l were restricted to a downstream distance of .apprx. 150m and ambient levels were reached within .apprx. 1 km of the dredge. The natural...

Beneficial use of dredged materials in Great Lakes commercial ports for transportation projects.

Science.gov (United States)

2014-05-01

This report describes an effort to facilitate beneficial use of dredged materials (DM) from Great Lakes ports and harbors as an alternative construction : material in transportation-related earthwork applications. The overall objective is to link tog...

United States of America Ocean Dumping Report for Calendar Year 1981. Dredged Material.

Science.gov (United States)

1982-06-01

ocean dumping rules and regulations, F.R. Vol 42 No. 7, 11 Jan 1977 (2) Metals: () esame as above(3) Orga& nics : same as above 1). Other :iiLvs.is: (I...results: (1) Nutrients: Meets chemical - biological testing criteria II (2) Metals: * B 1 t U S(3) Orga! nics : b. Other analyses: (1) Metals: (2...description of dredged material, dredging, and transportation made: a. Description: Silty sand to silty clay noncohesive Hydrogen Sulfide smell. BIDDLE b

Economical Treatment of Dredged Material to Facilitate Beneficial Use

Science.gov (United States)

2014-08-01

reduction, dewatering and drying ; and the treatment ( kiln ) phase. Debris and solids larger than 1.3 cm (0.5 in.) (gravel, and cobbles) are removed and...11 ii Abstract Growing constraints on conventional dredged material disposal are motivating movement toward more sustainable alternatives. Given...Sediment Washing for the Treatment of Saginaw River Sediments (EPA 1994e) ................. 40 MetPro Maximum Density Separator and Dry Screening

Dredging Operations Technical Support Program. General Decisionmaking Framework for Management of Dredged Material: Example Application to Commencement Bay, Washington.

Science.gov (United States)

1991-06-01

Figure 4) and was used to predict surface runoff water quality from dredged material as part of the CE/EPA FVP ( Westerdahl and Skogerboe 1981; Lee and...Sedimrnts," Miscellaneous Paper D-83-1, US Army Engineer Waterways Experiment Station, Vicksburg, MS. Westerdahl , H. E., and Skogerboe, J. G. 1981

A Guide for Using Geochemical Methods in Dredged Material, Sediment Tracking, and Sediment Budget Studies

Science.gov (United States)

2017-06-26

geochemical markers such as radioisotopes and stable isotopes, organic matter, and mineralogy/elemental composition are recognized and established methods ...further elucidate the original erosion source of accumulating sediment (Hoefs 2009). 2.3 Radioisotopes Radioisotopic dating is based on measuring the...ER D C TR -1 7- 3 Dredging Operations and Environmental Research Program A Guide for Using Geochemical Methods in Dredged Material

Evaluation of dredged material proposed for ocean disposal from Red Hook/Bay Ridge project areas, New York

Energy Technology Data Exchange (ETDEWEB)

Pinza, M.R.; Barrows, E.S.; Borde, A.B. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1996-09-01

The objective of the Red HookIBay Ridge project was to evaluate proposed dredged material from these two areas to determine its suitability for unconfined ocean disposal at the Mud Dump Site. Sediment samples were collected from the Red Hook/Bay Ridge project areas. Tests and analyses were conducted. The evaluation of proposed dredged material from the Red Hook/Bay Ridge project areas consisted of bulk sediment chemical analyses, chemical analyses of dredging site water and elutriate, water-column and benthic acute toxicity tests. Twenty-four individual sediment core samples were collected from these two areas and analyzed for grain size, moisture content, and total organic carbon (TOC). Three composite sediment samples, representing Red Hook Channel and the two Bay Ridge Reaches to be dredged, were analyzed for bulk density, specific gravity, metals, chlorinated pesticides, polychlorinated biphenyl (PCB) congeners, polynuclear aromatic hydrocarbons (PAH), and 1,4-dichlorobenzene. Dredging site water and elutriate water, which is prepared from the suspended-particulate phase (SPP) of the three Red Hook Bay Ridge sediment composites, were analyzed for metals, pesticides, and PCBS. Benthic acute toxicity tests were performed. Water-column or SPP toxicity tests were performed. Bioaccumulation tests were also conducted.

Summit on the beneficial use of dredged materials : turning a surplus material into a commodity of value.

Science.gov (United States)

2014-07-01

Dredged material management options for commercial ports, particularly those involving permanent or long-term placement facilities, are : diminishing. Many existing placement facilities serving these ports are at, or near capacity, and high costs, pl...

Ecological evaluation of proposed dredged material from the John F. Baldwin Ship Channel: Phase 3 -- biological testing

Energy Technology Data Exchange (ETDEWEB)

Kohn, N.P.; Karle, L.M.; Pinza, M.R.; Mayhew, H.L.; White, P.J.; Gruendell, B.D.; Word, J.Q. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1993-10-01

The John F. Baldwin Ship Channel is a 28-mile-long portion of the San Francisco Bay to Stockton Ship Channel, the primary shipping lane through San Francisco Bay and Delta. The San Francisco District of the US Army Corps of Engineers (USACE) is responsible for construction of the John F. Baldwin Ship Channel, which is authorized to be deepened to a project depth of {minus}45 ft relative to mean lower low water (MLLW). Approximately 8.5 million cubic yards (mcy) of sediment will be removed from the channel to reach this project depth. The USACE requested Battelle/Marine Sciences Laboratory (MSL) to conduct testing for ocean disposal under the guidelines in Evaluation of Dredged Material Proposed for Ocean Disposal-Testing Manual (EPA/USACE 1991). This testing manual contains a tiered evaluation approach developed specifically for ocean disposal of dredged material at a selected site. In this study, John F. Baldwin Ship Channel sediments were evaluated under the Tier III (biological) testing guidance, which is considered to be highly stringent and protective of the environment. The Tier III guidance for ocean disposal testing requires tests of water column effects, (following dredged material disposal), deposited sediment toxicity, and bioaccumulation of contaminants from deposited sediment (dredged material).

Guidelines for Selecting Control and Treatment Options for Contaminated Dredged Material.

Science.gov (United States)

1986-09-01

is being used to predict surface runoff water quality from dredged material as part of the CE/EPA FVP ( Westerdahl and Skogerboe 1981, Lee and...April 20, 1984. Water Pollution Control Federation. 1976. "Chlorination of Wastewater," Manual of Practice No. 4, Washington, D.C. Westerdahl , H. E

Introduction to Using Native Plant Community on Dredge Material Placement Areas

Science.gov (United States)

2017-05-01

solutions, such as riprap. In some cases, plants may also reduce offsite transport of particles from the surface of the sediments placed in the...to 30% of the in situ sediment volume). Hydraulic dredging, which involves re-suspension of sediments into a slurry that is then pumped through a...may be mechanically dredged and mechanically offloaded from barges, mechanically dredged and hydraulically offloaded, or hydraulically dredging and

Laboratory Assessment of Potential Impacts to Dungeness Crabs from Disposal of Dredged Material from the Columbia River

Energy Technology Data Exchange (ETDEWEB)

Vavrinec, John; Pearson, Walter H.; Kohn, Nancy P.; Skalski, J. R.; Lee, Cheegwan; Hall, Kathleen D.; Romano, Brett A.; Miller, Martin C.; Khangaonkar, Tarang P.

2007-05-07

Dredging of the Columbia River navigation channel has raised concerns about dredging-related impacts on Dungeness crabs (Cancer magister) in the estuary, mouth of the estuary, and nearshore ocean areas adjacent to the Columbia River. The Portland District, U.S. Army Corps of Engineers engaged the Marine Sciences Laboratory (MSL) of the U.S. Department of Energy’s Pacific Northwest National Laboratory to review the state of knowledge and conduct studies concerning impacts on Dungeness crabs resulting from disposal during the Columbia River Channel Improvement Project and annual maintenance dredging in the mouth of the Columbia River. The present study concerns potential effects on Dungeness crabs from dredged material disposal specific to the mouth of the Columbia River.

The Role of the Federal Standard in the Beneficial Use of Dredged Material

Science.gov (United States)

A guide for USACE Districts, other federal agencies, state agencies, local governments, and private interest groups. The Federal Standard Paper provides guidance on using dredged material as a resource to achieve environmental and economic benefits.

Dredged Material Management Categories for Tracking Beneficial Use

Science.gov (United States)

2015-06-01

NDC) compiles the project level information and prepares statistics at the Corps-wide level. The NDC maintains information on type of dredge plant ...project level information and prepares statistics at the Corps-wide level. The NDC maintains information on type of dredge plant , volume of sediments...the volume of sediment used for a beneficial purpose. In addition, regulations associated with both the Marine Protection Research and Sanctuaries

Design of a GIS-based rating protocol to assess the potential for landfill closure using dredge material in post Hurricane Sandy New Jersey.

Science.gov (United States)

Miskewitz, Robert J; Barone, Daniel; Guterl, Sar J; Uchrin, Christopher G

2017-05-12

New Jersey is rapidly running out of capacity for storage of dredged material. A potential solution to this lack of storage space is to remove and reuse the dredged material for some beneficial use. Results from a Rutgers University project performed for the New Jersey Department of Transportation, Office of Maritime Resources, designed to assess the potential for closure of New Jersey landfills using dredge material from existing Confined Disposal Facilities (CDFs) are presented and discussed. The project included an update of the existing NJDEP landfill database, the development of a rating system to identify landfills with the highest potential to utilize dredged material for their closure, and the identification and preliminary investigation of the top candidate landfills based on this rating system.

75 FR 54497 - Ocean Dumping; Guam Ocean Dredged Material Disposal Site Designation

Science.gov (United States)

2010-09-08

.... SUMMARY: The EPA is designating the Guam Deep Ocean Disposal Site (G- DODS) as a permanent ocean dredged... administration of ocean disposal permits; (2) development and maintenance of a site monitoring program; (3... include: (1) Regulating quantities and types of material to be disposed, including the time, rates, and...

78 FR 20316 - Final Issuance of General NPDES Permits (GP) for Small Suction Dredges in Idaho

Science.gov (United States)

2013-04-04

... System (NPDES) General Permit (IDG-37-0000) to placer mining operations in Idaho for small suction... Small Suction Dredges in Idaho AGENCY: Environmental Protection Agency, Region 10. ACTION: Final notice... significant economic impact on a substantial number of small entities.'' EPA has concluded that NPDES general...

Stabilization / solidification of polluted marine dredged sediment of port en Bessin France, using hydraulic binders and silica fume

Science.gov (United States)

Silitonga, Ernesto

2017-09-01

A large amount of sediment is dredged in France every year. Due to the increase of the amount of marine dredged sediments, environmentally reuse of dredged sediment is urgently needed in France. The first objective of this study is to find an application for reuse of marine dredged sediments materials, as new material for road construction. Hence, serial tests need to be realized to identify if marine dredged sediment could be utilized for road construction. The second goal is to enhance the physical, mechanical and chemical characteristics of the mix, by incorporating binders and sediments, and revealed the identification of the mechanical characteristics measured on the mixes is compatible with their use as a base course material. The results show that the treatment by hydraulics binders could satisfy the needed mechanical characteristics. The present of Silica Fume is aimed to reduce the pollution level, especially the heavy metal content. However, the proportion of hydraulics binders and silica fume needed to meet prescribed specification is important, so the reuse of the marine dredged sediments of Port-en-Bessin, France in road construction, as an alternative material could be achieved. After the geotechnical study in laboratory results shown as expected than the study to identify the chemical characteristic realized. To evaluate the environmental impacts of the used material, leaching test is performed. The leaching test was performed to verify the predicted release of pollutants based on total dissolution. And for the final part, the test results show that the polluted marine dredged sediments could be safely used (in term of environmental impact) as a new material in road construction.

Application of Toxicity Identification and Evaluation Procedures for Dredged Material Management

Science.gov (United States)

2017-02-01

human health and ecological receptors. This information is also useful when evaluating dredged material for open water disposal since it could eliminate...Cantwell, K. T. Ho, J. R. Serbst, and M. C. Pelletier. 2004. Use of zeolite for removing ammonia and ammonia-caused toxicity in marine toxicity...However, the evaluation of potential environmental impacts that may result from alternative management strategies, such as the beneficial use of

San Francisco Bay Long Term Management Strategy for Dredging

Science.gov (United States)

The San Francisco Bay Long Term Management Strategy (LTMS) is a cooperative effort to develop a new approach to dredging and dredged material disposal in the San Francisco Bay area. The LTMS serves as the Regional Dredging Team for the San Francisco area.

Flotation as a remediation technique for heavily polluted dredged material. 1. A feasibility study.

Science.gov (United States)

Cauwenberg, P; Verdonckt, F; Maes, A

1998-01-19

The flotation behaviour of highly polluted dredged material was investigated at different pH values by mechanical agitated (Denver) flotation. Up to 80% of cadmium, copper, lead and zinc could be concentrated in the froth layer which represented only 30% of the total mass. The maximum specificity for heavy metals, defined as the concentrating factor, was obtained at pH 8-9. The maximum recovery of heavy metals on the other hand was found to be reached at elevated pH values (pH 12). In addition the specificity of the flotation process for the transition metals could be assigned to their presence as metal sulphides in the dredged material. However, the interaction with organic matter is an important factor in determining their flotability. The carbonate fraction was irrelevant for the flotation behaviour of heavy metals.

Evaluation of Island and Nearshore Confined Disposal Facility Alternatives, Pascagoula River Harbor Dredged Material Management Plan

National Research Council Canada - National Science Library

Bunch, Barry

2003-01-01

...) for the Federal navigation project at Pascagoula, MS. The studies focused on evaluating an option under consideration for the placement of dredged material in an island confined disposal facility (CDF...

Environmental impact and recovery at two dumping sites for dredged material in the North Sea

International Nuclear Information System (INIS)

Stronkhorst, J.; Ariese, F.; Hattum, B. van; Postma, J.F.; Kluijver, M. de; Besten, P.J. den; Bergman, M.J.N.; Daan, R.; Murk, A.J.; Vethaak, A.D.

2003-01-01

Marine benthic resources near dumping sites are adversely affected by physical disturbances, but a causal link to contaminant damage could not be found. - The environmental impact and recovery associated with the long and uninterrupted disposal of large volumes of moderately contaminated dredged material from the port of Rotterdam was studied at nearby dumping sites in the North Sea. Observations were made on sediment contamination, ecotoxicity, biomarker responses and benthic community changes shortly after dumping at the 'North' site had ceased and at the start of disposal at the new dumping site 'Northwest'. During the period of dumping, very few benthic invertebrates were found at the North site. Concentrations of cadmium, mercury, polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs) and tributyltin (TBT) in the fine sediment fraction ( 3 of moderately contaminated dredged material had been dumped at the new dumping site Northwest, the species richness and abundance of benthic invertebrates declined over an area extending about 1-2 km eastwards. This correlated with a shift in sediment texture from sand to silt. The contamination of the fine sediment fraction at the Northwest location doubled. It is concluded that marine benthic resources at and around the dumping sites have been adversely affected by physical disturbance (burial, smothering). However, no causal link could be established with sediment-associated contaminants from the dredged spoils

Ecological evaluation of proposed dredged material from Winyah Bay, South Carolina

International Nuclear Information System (INIS)

Ward, J.A.; Gardiner, W.W.; Pinza, M.R.; Word, J.Q.

1993-10-01

The navigational channels of Winyah Bay, Georgetown Harbor, South Carolina require dredging to enable normal shipping traffic to use these areas. Before dredging, environmental assessments must be conducted to determine the suitability of this dredged sediment for unconfined, open-water disposal. The Charleston, South Carolina District Office of the US Army Corps of Engineers (USACE) requested that the Battelle/Marine Science Laboratory (MSL) collect sediment samples and conduct the required physical/chemical, toxicological, and bioaccumulation evaluations as required in the 1991 Implementation Manual. This report is intended to provide information required to address potential ecological effects of the Entrance Channel and Inner Harbor sediments proposed disposal in the ocean

Beneficial Use of Dredged Material Monitoring Program. 1996 Annual report (Base Year Through Fy1996).

Science.gov (United States)

1997-01-01

at the Atchafalaya River - Horseshoe Cut prior to FY1995 was unavailable at the time of this report. It is likely that dredged material was placed...Callibrachoa pa’rviflora (Juss.) D’Arcy wild petunia ( Petunia parviflora) perennial; roadsides and waste places Chamaesyce maculata (L.) Small

Three-dimensional visualization maps of suspended-sediment concentrations during placement of dredged material in 21st Avenue West Channel Embayment, Duluth-Superior Harbor, Duluth, Minnesota, 2015

Science.gov (United States)

Groten, Joel T.; Ellison, Christopher A.; Mahoney, Mollie H.

2016-06-30

Excess sediment in rivers and estuaries poses serious environmental and economic challenges. The U.S. Army Corps of Engineers (USACE) routinely dredges sediment in Federal navigation channels to maintain commercial shipping operations. The USACE initiated a 3-year pilot project in 2013 to use navigation channel dredged material to aid in restoration of shoreline habitat in the 21st Avenue West Channel Embayment of the Duluth-Superior Harbor. Placing dredged material in the 21st Avenue West Channel Embayment supports the restoration of shallow bay aquatic habitat aiding in the delisting of the St. Louis River Estuary Area of Concern.The U.S. Geological Survey, in cooperation with the USACE, collected turbidity and suspended-sediment concentrations (SSCs) in 2014 and 2015 to measure the horizontal and vertical distribution of SSCs during placement operations of dredged materials. These data were collected to help the USACE evaluate the use of several best management practices, including various dredge material placement techniques and a silt curtain, to mitigate the dispersion of suspended sediment.Three-dimensional visualization maps are a valuable tool for assessing the spatial displacement of SSCs. Data collection was designed to coincide with four dredged placement configurations that included periods with and without a silt curtain as well as before and after placement of dredged materials. Approximately 230 SSC samples and corresponding turbidity values collected in 2014 and 2015 were used to develop a simple linear regression model between SSC and turbidity. Using the simple linear regression model, SSCs were estimated for approximately 3,000 turbidity values at approximately 100 sampling sites in the 21st Avenue West Channel Embayment of the Duluth-Superior Harbor. The estimated SSCs served as input for development of 12 three-dimensional visualization maps.

Analysis of decision support system for dredging operations management.

Science.gov (United States)

2005-12-01

This research developed an improved method for optimizing the disposal of dredged material : at offshore disposal sites. A nonlinear programming model has been developed to assist in : the development of dredging plans at open water disposal sites. T...

Three-year summary report of biological monitoring at the Southwest Ocean dredged-material disposal site and additional locations off Grays Harbor, Washington, 1990--1992

Energy Technology Data Exchange (ETDEWEB)

Antrim, L.D.; Shreffler, D.K.; Pearson, W.H.; Cullinan, V.I. [Battelle Marine Research Lab., Sequim, WA (United States)

1992-12-01

The Grays Harbor Navigation Improvement Project was initiated to improve navigation by widening and deepening the federal channel at Grays Harbor. Dredged-material disposal sites were selected after an extensive review process that included inter-agency agreements, biological surveys, other laboratory and field studies, and preparation of environmental impact statements The Southwest Site, was designated to receive materials dredged during annual maintenance dredging as well as the initial construction phase of the project. The Southwest Site was located, and the disposal operations designed, primarily to avoid impacts to Dungeness crab. The Final Environmental Impact Statement Supplement for the project incorporated a Site Monitoring Plan in which a tiered approach to disposal site monitoring was recommended. Under Tier I of the Site Monitoring Plan, Dungeness crab densities are monitored to confirm that large aggregations of newly settled Dungeness crab have not moved onto the Southwest Site. Tier 2 entails an increased sampling effort to determine whether a change in disposal operations is needed. Four epibenthic surveys using beam trawls were conducted in 1990, 1991, and 1992 at the Southwest Site and North Reference area, where high crab concentrations were found in the spring of 1985. Survey results during these three years prompted no Tier 2 activities. Epibenthic surveys were also conducted at two nearshore sites where construction of sediment berms has been proposed. This work is summarized in an appendix to this report.

Evaluation of Proposed Dredged Material Disposal Alternatives for New York/New Jersey Harbor. Phase 1

Science.gov (United States)

1988-08-01

been developed ( Westerdahl and Skogerboe 1981) and is being used x..-’. to predict surface runoff water quality from dredged material as part of the...Islands in New York Harbor," Miscellaneous Paper D-88-3, US Army Engineer Waterways Experiment Station, Vicksburg, MS. Westerdahl , H. E., and Skogerboe

determination of area and volume from dredged geodata set

African Journals Online (AJOL)

user

or volume of dredged materials can be determined for the purpose of costing and extent of the dredging. Therefore, ... To excavate pipeline, cable and tunnel trenches. ❖ To mine ores or ... depends, in part, on the sediment properties[9].An.

The environmental impact and recovery at two dumping sites for dredged material in the North Sea

NARCIS (Netherlands)

Stronkhorst, J.; Ariese, F.; Hattum, van B.; Postma, J.F.; Kluijver, de M.; Besten, den P.; Bergman, M.J.N.; Daan, R.; Murk, A.J.; Vethaak, A.D.

2003-01-01

The environmental impact and recovery associated with the long and uninterrupted disposal of large volumes of moderately contaminated dredged material from the port of Rotterdam was studied at nearby dumping sites in the North Sea. Observations were made on sediment contamination, ecotoxicity,

33 CFR 336.2 - Transportation of dredged material for the purpose of disposal into ocean waters.

Science.gov (United States)

2010-07-01

... quality certification and determine consistency with a Federally-approved coastal zone management plan for... the 401 certification process or the CZMA consistency determination process. Nevertheless, the Corps... quality certification for proposed Corps ocean disposal of dredged material within the limits of the...

15 CFR Appendix C to Subpart M of... - Dredged Material Disposal Sites Within the Sanctuary

Science.gov (United States)

2010-01-01

... the Sanctuary C Appendix C to Subpart M of Part 922 Commerce and Foreign Trade Regulations Relating to... COMMERCE OCEAN AND COASTAL RESOURCE MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine Sanctuary Pt. 922, Subpt. M, App. C Appendix C to Subpart M of Part 922—Dredged Material...

Admixing dredged marine clay with cement-bentonite for reduction of compressibility

Science.gov (United States)

Rahilman, Nur Nazihah Nur; Chan, Chee-Ming

2017-11-01

Cement-based solidification/stabilization is a method that is widely used for the treatment of dredged marine clay. The key objective for solidification/stabilization is to improve the engineering properties of the originally soft, weak material. Dredged materials are normally low in shear strength and bearing capacity while high incompressibility. In order to improve the material's properties for possible reuse, a study on the one-dimensional compressibility of lightly solidified dredged marine clay admixed with bentonite was conducted. On the other hand, due to the viscous nature, particularly the swelling property, bentonite is a popular volumising agent for backfills. In the present study, standard oedometer test was carried out to examine the compressibility of the treated sample. Complementary strength measurements were also conducted with laboratory vane shear setup on both the untreated and treated dredged marine clay. The results showed that at the same binder content, the addition of bentonite contributed significantly to the reduction of compressibility and rise in undrained shear strength. These improved properties made the otherwise discarded dredged marine soils potentially reusable for reclamation works, for instance.

Draft Site Management and Monitoring Plan for Corpus Christi Maintenance and New Work Ocean Dredged Material Disposal Site

Science.gov (United States)

USEPA Region 6 and the US Army Corps of Engineers submit for public comment the Draft Site Management and Monitoring Plan for Corpus Christi Maintenance and New Work Ocean Dredged Material Disposal Site

Cd and Zn concentrations in small mammals and willow leaves on disposal facilities for dredged material

NARCIS (Netherlands)

Mertens, J.; Luyssaert, S.; Verbeeren, S.; Vervaeke, P; Lust, N

2001-01-01

Disposal sites for dredged material are often polluted with heavy metals. The uptake of Cd and Zn by small mammals and willow trees was assessed on three sites with a different pollution degree. Detailed soil sampling showed a huge variation in soil characteristics within the sites, typical for

Summary of Vegetation Changes on Dredged Material and Environmental Management Program Sites in the St. Paul District, Corps of Engineers

National Research Council Canada - National Science Library

Anfang, Robert

2000-01-01

This report summaries the results of vegetation monitoring activities on dredged material placement sites on the Upper Mississippi River between Minneapolis, Minnesota and Prairie du Chien, Wisconsin...

Biological and chemical effects of the disposal of dredged material in the Belgian Part of the North Sea (licensing period 2010-2011)

OpenAIRE

Van Hoey, G.; Delahaut, V.; Derweduwen, J.; Devries, L.; Dewitte, B.; Hostens, K.; Robbens, J.

2011-01-01

It is important to investigate the effects of dumping of dredged material in the marine environment from ecosystem perspective, because it could lead to different responses of the ecosystem. Therefore, the regular dredging program from ILVO Fisheries is evaluating the impact of these dumping activities at different levels by looking at: i) differences in biological characteristics of the ecosystem components macrobenthos, epibenthos and demersal fish ii) the (bio)accumulation of contaminants ...

Environmental management for dredging sediments - the requirement of developing nations.

Science.gov (United States)

Manap, Norpadzlihatun; Voulvoulis, Nikolaos

2015-01-01

Scientific research has characterized the effects of dredging, an underwater excavation process for navigational purposes or material extraction, and has shown its association with a number of chemical, physical and biological impacts. Due to this, much environmental management has been applied in the dredging industry in order to manage its detrimental effects. However, developing nations may have different approaches towards their dredging environmental management to compare to their companions with higher economic strength. Moreover, scientific evidence to make an informed decision is often lacking, hence affecting the number of research executed at these nations, limiting their efforts to preserve the environment. This paper reviews the dredging environmental impacts and its two important factors, dredging technology and sediment characteristic, that determine the magnitude of impacts through literature review, and discusses the need for a more integrated dredging environmental management to be developed for developing nations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 B of -42-foot project)

Energy Technology Data Exchange (ETDEWEB)

Kohn, N.P.; Ward, J.A.; Mayhew, H.L.; Word, J.Q.; Barrows, E.S.; Goodwin, S.M.; Lefkovitz, L.F. (Battelle/Marine Sciences Lab., Sequim, WA (United States))

1992-06-01

The Water Resources Development Act of 1986 (Public Law 99-662) authorized the US Army Corps of Engineers (USACE) San Francisco District, to deepen and widen the navigational channels of the Oakland Inner and Outer Harbors to accommodate deeper-draft vessels. The USACE is considering several disposal options for the dredged material removed during these channel improvements including open-water disposal. Dredged material proposed for open-water disposal must be evaluated to determine the potential impacts of the disposal activity on the water column and disposal site environments. The USACE requested that Battelle/Marine Sciences Laboratory (MSL) conduct studies to evaluate open-water disposal options for Oakland Harbor sediments. This request developed into the Oakland Harbor Phase III Program. This is Volume 2 of a two-volume report that presents information gathered to determine the suitability of ocean disposal of sediments dredged from Oakland Harbor. This volume contains the Appendixes (A through N), which provide details of the data analyses and full presentation of the data and results.

Effects of dredging operations on sediment quality. Contaminant mobilization in dredged sediments from the Port of Santos, SP, Brazil

Energy Technology Data Exchange (ETDEWEB)

Torres, Ronaldo J.; Santos, Fernando C.; Mozeto, Antonio A. [Lab. de Biogeoquimica Ambiental, Dept. de Quimica, Univ. Federal de Sao Carlos, Sao Paulo, SP (Brazil); Abessa, Denis M.S.; Maranho, Luciane A.; Davanso, Marcela B. [Campus Experimental do Litoral Paulista, UNESP - Univ. Estadual Paulista ' Julio de Mesquita Filho' , Sao Paulo, SP (Brazil); Nascimento, Marcos R.L. do [Lab. de Pocos de Caldas (LAPOC), CNEN-Comissao Nacional de Energia Nuclear, MG (Brazil)

2009-10-15

Background, aim, and scope Contaminated sediments are a worldwide problem, and mobilization of contaminants is one of the most critical issues in environmental risk assessment insofar as dredging projects are concerned. The investigation of how toxic compounds are mobilized during dredging operations in the channel of the Port of Santos, Brazil, was conducted in an attempt to assess changes in the bioavailability and toxicity of these contaminants. Materials and methods Bulk sediment samples and their interstitial waters and elutriates were subjected to chemical evaluation and ecotoxicological assessment. Samples were collected from the channel before dredging, from the dredge's hopper, and from the disposal site and its surroundings. Results The results indicate that the bulk sediments from the dredging site are contaminated moderately with As, Pb, and Zn and severely with Hg, and that polycyclic aromatic hydrocarbon (PAH) concentrations are relatively high. Our results also show a 50% increase in PAH concentrations in suspended solids in the water collected from the hopper dredge. This finding is of great concern, since it refers to the dredge overflow water which is pumped back into the ecosystem. Acute toxicity tests on bulk sediment using the amphipod Tiburonella viscana showed no toxicity, while chronic tests with the sea urchin Lytechinus variegatus showed toxicity in the interstitial waters and elutriates. Results are compared with widely used sediment quality guidelines and with a sediment quality assessment scheme based on various lines of evidence. Conclusions The data presented here indicate that the sediments collected in this port show a certain degree of contamination, especially those from the inner part of the channel. The classification established in this study indicated that sediments from the dredged channel are impacted detrimentally and that sea disposal may disperse contaminants. According to this classification, the sediments are

Assessment of the Effectiveness of Environmental Dredging in South Lake, China

Science.gov (United States)

Wang, Xiao Yu; Feng, Jiang

2007-08-01

Environmental dredging is a primary remedial option for removal of the contaminated material from aquatic environment. Of primary concern in environmental dredging is the effectiveness of the intended sediment removal. A 5-year field monitoring study was conducted to assess the effectiveness of the environmental dredging in South Lake, China. The concentrations of total nitrogen (TN), total phosphors, and heavy metals (Zn, Pb, Cd, Cu, Cr, Ni, Hg, and As) before and after dredging in sediment were determined and compared. Multiple ecological risk indices were employed to assess the contamination of heavy metals before and after dredging. Our results showed that the total phosphorus levels reduced 42% after dredging. Similar changes for Hg, Zn, As Pb, Cd, Cu, Cr, and Ni were observed, with reduction percentages of 97.0, 93.1, 82.6, 63.9, 52.7, 50.1, 32.0, and 23.6, respectively, and the quality of sediment improved based on the criterion of Sediment Quality Guidelines by USEPA and contamination degree values (Cd) decreased significantly (paired t-test, p heavy metals from South Lake. Nevertheless, the dredging was ineffective to remove total nitrogen from sediment. We conclude that the reason for the observed increase in TN after dredging was likely ammonia release from the sediment impairing the dredging effectiveness.

Characterization of Dredged Oyster Shell Deposits at Mobile Bay, Alabama Using Geophysical Methods

Directory of Open Access Journals (Sweden)

Stanley C. Nwokebuihe

2016-12-01

Full Text Available The need for disposing materials dredged from ship channels is a common problem in bays and lagoons. This study is aimed at investigating the suitability of scour features produced by dredging oyster shell deposits in Mobile Bay, Alabama, to dispose excavated channel material. A study area approximately 740 by 280 m lying about 5 km east of Gaillard Island was surveyed using underwater electrical resistivity tomography (UWERT and continuous electrical resistivity profiling (CERP tools. The geophysical survey was conducted with the intent to map scour features created by oyster shell dredging activities in the bay between 1947 and 1982. The geoelectrical surveys show that oyster beds are characterized by high resistivity values greater than 1.1 ohm.m while infilled dredge cuts show lower resistivity, generally from 0.6 to 1.1 ohm.m. The difference in resistivity mainly reflects the lithology and the consolidation of the shallow sediments: consolidated silty clay and sandy sediments rich in oyster shell deposits (with less clay content overlying unconsolidated clayey materials infilling the scours. Results show that most of the infilled dredge cuts are mostly distributed in the north-south direction. Considering that the scours are generally up to 6 m deep across the survey location, it is estimated that about 0.8 million cubic meters of oyster shells and overlying strata were dredged from the survey location.

The Ecological Impact of Beach Nourishment with Dredged Materials on the Intertidal Zone at Bogue Banks, North Carolina.

Science.gov (United States)

1983-03-01

ronmental advisability of beach nourishment with dredged materials. The high-energy sandy teach environment is harsh, characterized by great variations in...34 Botanica Marina, No. 20, 1977, pp. 227-232. ANDERSON, W.D., et al., "The Macro-Fauna of the Surf Zone off Folly Beach, South Carolina," Technical Report

Dredged Material Management Plan and Environmental Impact Statement. McNary Reservoir and Lower Snake River Reservoirs. Appendix C: Economic Analysis

National Research Council Canada - National Science Library

2002-01-01

...; for managment of dredged material from these reservoirs; and for maintenance of flow conveyance capacity at the most upstream extent of the Lower Granite reservoir for the remaining economic life of the dam and reservoir project (to year 2074...

A technique for the assessment of the visual impact of nearshore confined dredged materials and other built islands

Science.gov (United States)

Roy Mann

1979-01-01

Drilling rigs, confined dredged material disposal sites power and sewage treatment facilities, and other built objects on or near shorelines have often created appreciable impacts on the aesthetic perceptions of residents and recreational users. Techniques for assessing such impacts that are reviewed in this paper include viewscape analysis for large-scale shore...

Optimizing Dredge-and-Dump Activities for River Navigability Using a Hydro-Morphodynamic Model

Directory of Open Access Journals (Sweden)

Andries J. Paarlberg

2015-07-01

Full Text Available Worldwide, significant dredging activities of riverbed sediment are employed to ensure that freight transportation on rivers can continue year-round. Imbalances of sediment budget may produce relevant impacts regarding river morphology and related environmental services. This study shows that hydro-morphodynamic modeling tools can be used to optimize dredge-and-dump activities and, at the same time, mitigate problems deriving from these activities in rivers. As a case study, we focused on dredging activities on the Lower Parana River, Argentina. Navigation on this river is of crucial importance to the economies of the bordering countries, hence, each year significant dredging activities are employed. To estimate dredging loads under different strategies, a 25 km river reach of the Parana River was modeled using the Delft3D-modelling suite by Deltares. The Netherlands, to simulate flow-sediment interactions in a quasi-steady and uncoupled approach. Impacts of dredging activities were explicitly included. Different dredge-and-dump strategies included variations in dredging over-depth (clearance and variations in dumping locations. Our results indicate that dredge-and-dump strategies can be targeted to stimulate natural processes that improve the depth and stability of the navigation channel and to counteract unwanted bed level responses in the long-medium term. A ~40% reduction in dredging effort could be achieved by moving the dredged material to distant locations in the secondary channel rather than dumping to the side of the waterway in the main channel.

33 CFR 338.2 - Activities involving the discharge of dredged or fill material into waters of the U.S.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Activities involving the discharge of dredged or fill material into waters of the U.S. 338.2 Section 338.2 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE OTHER CORPS ACTIVITIES INVOLVING...

Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 B of -42-foot project). Volume 2, Appendixes

Energy Technology Data Exchange (ETDEWEB)

Kohn, N.P.; Ward, J.A.; Mayhew, H.L.; Word, J.Q.; Barrows, E.S.; Goodwin, S.M.; Lefkovitz, L.F. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1992-06-01

The Water Resources Development Act of 1986 (Public Law 99-662) authorized the US Army Corps of Engineers (USACE) San Francisco District, to deepen and widen the navigational channels of the Oakland Inner and Outer Harbors to accommodate deeper-draft vessels. The USACE is considering several disposal options for the dredged material removed during these channel improvements including open-water disposal. Dredged material proposed for open-water disposal must be evaluated to determine the potential impacts of the disposal activity on the water column and disposal site environments. The USACE requested that Battelle/Marine Sciences Laboratory (MSL) conduct studies to evaluate open-water disposal options for Oakland Harbor sediments. This request developed into the Oakland Harbor Phase III Program. This is Volume 2 of a two-volume report that presents information gathered to determine the suitability of ocean disposal of sediments dredged from Oakland Harbor. This volume contains the Appendixes (A through N), which provide details of the data analyses and full presentation of the data and results.

Dredged sediments as a resource for brick production: Possibilities and barriers from a consumers’ perspective

International Nuclear Information System (INIS)

Cappuyns, Valérie; Deweirt, Valentine; Rousseau, Sandra

2015-01-01

Highlights: • Consumers are suspicious towards bricks produced from dredged sediments. • Technical quality, safety and environmental impacts are considered key characteristics. • Public has insufficient knowledge on bricks produced from dredged sediments. • Sensitization and provision of information to customers are of primary importance. - Abstract: A possible solution for the oversupply of dredged sediments is their use as a raw material in brick production. Despite the fact that several examples (e.g., Agostini et al., 2007; Hamer and Karius, 2002; Xu et al., 2014) show that this application is feasible, some economic, technical and social limitations interfere with the development of a market of dredged materials in brick production in Flanders. While we describe the main characteristics of the supply side, we focus on the limitations and barriers from the demand side in the present study. Based on a consumers survey we analyze consumers’ risk perceptions and attitudes towards bricks produced from dredged sediments. Consumers in Flanders are rather suspicious with respect to bricks produced from dredged sediments and their risk perception is mainly determined by the possibility of a bad bargain (brick of inferior quality) and the connotation with chemical contamination. The willingness to pay for bricks made from dredged sediments is mainly influenced by the age of the respondents, as well environmental awareness, and the respondents’ belief in their ability to influence environmental problems. Sensitization and information of customers seems to be of primary importance to make dredged-sediment-derived bricks a successful product

Dredged sediments as a resource for brick production: Possibilities and barriers from a consumers’ perspective

Energy Technology Data Exchange (ETDEWEB)

Cappuyns, Valérie, E-mail: valerie.cappuyns@kuleuven.be; Deweirt, Valentine; Rousseau, Sandra

2015-04-15

Highlights: • Consumers are suspicious towards bricks produced from dredged sediments. • Technical quality, safety and environmental impacts are considered key characteristics. • Public has insufficient knowledge on bricks produced from dredged sediments. • Sensitization and provision of information to customers are of primary importance. - Abstract: A possible solution for the oversupply of dredged sediments is their use as a raw material in brick production. Despite the fact that several examples (e.g., Agostini et al., 2007; Hamer and Karius, 2002; Xu et al., 2014) show that this application is feasible, some economic, technical and social limitations interfere with the development of a market of dredged materials in brick production in Flanders. While we describe the main characteristics of the supply side, we focus on the limitations and barriers from the demand side in the present study. Based on a consumers survey we analyze consumers’ risk perceptions and attitudes towards bricks produced from dredged sediments. Consumers in Flanders are rather suspicious with respect to bricks produced from dredged sediments and their risk perception is mainly determined by the possibility of a bad bargain (brick of inferior quality) and the connotation with chemical contamination. The willingness to pay for bricks made from dredged sediments is mainly influenced by the age of the respondents, as well environmental awareness, and the respondents’ belief in their ability to influence environmental problems. Sensitization and information of customers seems to be of primary importance to make dredged-sediment-derived bricks a successful product.

Technical Guidelines for Environmental Dredging of Contaminated Sediments

Science.gov (United States)

2008-09-01

material from barges to adjacent rehandling facilities or to move material relatively short distances. Conveyors can also be used to transfer ...by direct dumping or unloading into a chute or conveyor . Truck transport of treated material to landfills may also be considered. The material...environmental dredging for purposes of a feasibility study, remedial design , and implementation. The scope of this document is limited to the technical

Site Management and Monitoring Plan (SMMP) for the Mouth of Columbia River- Deep and Shallow Water Ocean Dredged Material Disposal Sites, OR/WA

Science.gov (United States)

This SMMP is intended to provide management and monitoring strategies for disposal in the Mouth of Columbia River- Deep and Shallow Ocean Dredged Material Disposal Sites on the border of Oregon and Washington.

Ocean Dredged Material Disposal Site (ODMDS) Authorization and Short-Term FATE (STFATE) Model Analysis: 2014-2015 Working Group Findings Report

Science.gov (United States)

2016-03-01

fractions A grain size or sieve analysis typically yields the mass fraction of each particle size class after dispersing all of the material. However...ER D C TR -1 6- 2 Ocean Dredged Material Disposal Site (ODMDS) Authorization and Short-Term FATE (STFATE) Model Analysis 2014 – 2015...Term FATE (STFATE) Model Analysis 2014 – 2015 Working Group Findings Report Jase D. Ousley Coastal and Hydraulics Laboratory U.S. Army Engineer

Evaluation of Dredged Material Proposed for Ocean Disposal from Federal Projects in New York and New Jersey and the Military Ocean Terminal (MOTBY)

Energy Technology Data Exchange (ETDEWEB)

Barrows, E.S.; Antrim, L.D.; Pinza, M.R.; Gardiner, W.W.; Kohn, N.P.; Gruendell, B.D.; Mayhew, H.L.; Word, J.Q.; Rosman, L.B. [Battelle Marine Sciences Laboratory, Sequim, Washington (United States)

1996-08-01

The U.S. Army Corps of Engineers (USACE) is authorized by Section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (MPRSA), Public Law 92-532, and by the Clean Water Act of 1972 (CWA) and Amendments of 1977 to permit, evaluate, and regulate the disposal of dredged material in ocean waters to minimize adverse environmental effects. Compliance with the regulations of the MPRSA calls for physical and biological testing of sediment proposed for dredging prior to its disposal in ocean waters. The testing required by the MPRSA criteria is conducted under a testing manual developed by the USACE and the U.S. Environmental Protection Agency (EPA), Evaluation of Dredged Material Proposed for Ocean Disposal (Testing Manual), commonly referred to as the `Green Book.` Testing protocols in the Green Book include bulk sediment analysis, grain size analysis, elutriate testing, and biological testing. The biological testing includes bioassays for acute toxicity as well as analysis to determine bioaccumulation of certain contaminants by marine organisms. The objective of the USACE-NYD Federal Projects Program was to evaluate sediment proposed for dredging and unconfined ocean disposal at the Mud Dump Site. The results of analytical measurements and bioassays performed on the test sediments were compared with analyses of sediment from the Mud Dump Reference Site to determine whether the test sediments were acutely toxic to marine organisms or resulted in statistically significantly greater bioaccumulation of contaminants in marine organisms, relative to the reference sediment. Testing for the federal project areas was performed according to the requirements.

Improving Site Characterization for Rock Dredging using a Drilling Parameter Recorder and the Point Load Test

Science.gov (United States)

1994-09-01

materials. Also, available data from drilling rates in the mining and tunneling industries (Howarth and Rowlands 1987, Somerton 1959) indicate a...selected uniform natural rock materials and several man -made rock simulants were used to obtain drilling parameter records for materials of known...Dredging Seminar, Atlantic City, NJ, May 1993. Western Dredging Association (WEDA) and Texas A&M University. Somerton , W. H. (1959). "A laboratory study of

Environmental dredging residual generation and management.

Science.gov (United States)

Patmont, Clay; LaRosa, Paul; Narayanan, Raghav; Forrest, Casey

2018-05-01

The presence and magnitude of sediment contamination remaining in a completed dredge area can often dictate the success of an environmental dredging project. The need to better understand and manage this remaining contamination, referred to as "postdredging residuals," has increasingly been recognized by practitioners and investigators. Based on recent dredging projects with robust characterization programs, it is now understood that the residual contamination layer in the postdredging sediment comprises a mixture of contaminated sediments that originate from throughout the dredge cut. This mixture of contaminated sediments initially exhibits fluid mud properties that can contribute to sediment transport and contamination risk outside of the dredge area. This article reviews robust dredging residual evaluations recently performed in the United States and Canada, including the Hudson River, Lower Fox River, Ashtabula River, and Esquimalt Harbour, along with other projects. These data better inform the understanding of residuals generation, leading to improved models of dredging residual formation to inform remedy evaluation, selection, design, and implementation. Data from these projects confirm that the magnitude of dredging residuals is largely determined by site conditions, primarily in situ sediment fluidity or liquidity as measured by dry bulk density. While the generation of dredging residuals cannot be avoided, residuals can be successfully and efficiently managed through careful development and implementation of site-specific management plans. Integr Environ Assess Manag 2018;14:335-343. © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

A Single-Point Mooring System for Direct Pumpout of Hopper Dredges

National Research Council Canada - National Science Library

1992-01-01

This technical note describes a direct pumpout (DPO) system for use with hopper dredges, operating and design criteria for the DPO, initial mooring system designs, and the final DPO and mooring system selected...

Guidelines for assessing the valorization of a waste into cementitious material: dredged sediment for production of self compacting concrete

Directory of Open Access Journals (Sweden)

Rozas, F.

2015-09-01

Full Text Available This article presents some guidelines in order to analyse the feasibility of including a waste material in the production of a structural cementitious material. First of all, the compatibility of the waste with a cementitious material has to be assured; then, if necessary, a decontamination step will be carried out; after, decision on the type of material has to be taken based on different aspects, with special emphasis on the granulometry. As a last step, mechanical, environmental and durability properties have to be evaluated. Then the procedure is illustrated with a full example, obtaining a self compacting concrete (SCC including dredged sediment taken from a Spanish harbour.Este artículo presenta algunas directrices con el fin de analizar la posibilidad de incluir un material de desecho en la producción de un material base cemento estructural. En primer lugar, debe asegurarse la compatibilidad de los residuos con el material base cemento. Tras ello, si es necesario, se llevará a cabo la etapa de descontaminación del residuo. Después debe tomarse la decisión sobre el tipo de material a utilizar en base a diferentes aspectos, haciendo especial énfasis en la granulometría. Como último paso, deben evaluarse las propiedades mecánicas, ambientales y de durabilidad del producto final. El procedimiento a seguir se ilustra con un ejemplo concreto basado en la obtención de un hormigón autocompactante (SCC incluyendo en su fabricación sedimentos dragados tomados de un puerto español.

Summary of Measurement Protocols for Sediment Resuspended from Dredging Operations

National Research Council Canada - National Science Library

2006-01-01

... of all the data required to assess releases and mechanisms of releases from different types of dredges working in different sediment conditions such as cohesive, noncohesive, and rock materials...

Preliminary Assessment of Potential Impacts to Dungeness Crabs from Disposal of Dredged Materials from the Columbia River

Energy Technology Data Exchange (ETDEWEB)

Pearson, Walter H.; Miller, Martin C.; Williams, Greg D.; Kohn, Nancy P.; Skalski, John R.

2006-02-01

Dredging of the Columbia River navigation channel has raised concerns about dredging-related impacts on Dungeness crabs (Cancer magister). The overall objectives of this effort are to synthesize what is known about disposal effects on Dungeness crabs (Phase 1) and to offer approaches to quantify the effects, including approaches to gain a population-level perspective on any effects found in subsequent studies (Phase 2). This report documents Phase 1, which included (1) development of a conceptual model to integrate knowledge about crab biology and the physical processes occurring during disposal, (2) application of physics-based numerical modeling of the disposal event to understand the physical forces and processes to which a crab might be exposed during disposal, (3) conduct of a vulnerability analysis to identify the potential mechanisms by which crabs may be injured, and (4) recommendations of topics and approaches for future studies to assess the potential population-level effects of disposal on Dungeness crabs. The conceptual model first recognizes that disposal of dredged materials is a physically dynamic process with three aspects: (1) convective descent and bottom encounter, (2) dynamic collapse and spreading, and (3) mounding. Numerical modeling was used to assess the magnitude of the potentially relevant forces and extent of mounding in single disposal events. The modeling outcomes show that predicted impact pressure, shear stress, and mound depth are greatly reduced by discharge in deep water, and somewhat reduced at longer discharge duration. The analysis of numerical modeling results and vulnerabilities indicate that the vulnerability of crabs to compression forces under any of the disposal scenarios is low. For the deep-water disposal scenarios, the maximum forces and mounding do not appear to be sufficiently high enough to warrant concern for surge currents or burial at the depths involved (over 230 ft). For the shallow-water (45 to 65 ft), short

Literature Review of Dredging Physical Models

Science.gov (United States)

This U.S. Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, special report presents a review of dredging physical ...model studies with the goal of understanding the most current state of dredging physical modeling, understanding conditions of similitude used in past...studies, and determining whether the flow field around a dredging operation has been quantified. Historical physical modeling efforts have focused on

Overdepth Dredging and Characterization Depth Recommendations

Science.gov (United States)

2007-06-01

bucket is hoisted to the surface and usually side dumped into a barge or sidecast to its placement site. The general clamshell dredge’s horizontal...excavation accuracies vary as a function of type of dredging equipment used (mechanical or hydraulic ) and interaction with site-specific physical...surveys. Dredge excavation accuracies vary as a function of the type of dredging equipment used (mechanical or hydraulic ) and its respective

Solidification/stabilization of dredged marine sediments for road construction.

Science.gov (United States)

Wang, Dong Xing; Abriak, Nor Edine; Zentar, Rachid; Xu, WeiYa

2012-01-01

Cement/lime-based solidification is an environmentally sound solution for the management of dredged marine sediments, instead of traditional solutions such as immersion. Based on the mineralogical composition and physical characteristics of Dunkirk sediments, the effects of cement and lime are assessed through Atterberg limits, modified Proctor compaction, unconfined compressive strength and indirect tensile strength tests. The variation of Atterberg limits and the improvement in strength are discussed at different binder contents. The potential of sediments solidified with cement or lime for road construction is evaluated through a proposed methodology from two aspects: I-CBR value and material classification. The test results show the feasibility of solidified dredged sediments for beneficial use as a material in road construction. Cement is superior to lime in terms of strength improvement, and adding 6% cement is an economic and reasonable method to stabilize fine sediments.

Oyster Shell Dredging in Atchafalaya Bay and Adjacent Waters, Louisiana. Volume 1. Final Environment Impact Statement and Appendixes.

Science.gov (United States)

1987-11-01

This force majure clause shall not apply to the annual minimum guaranty set forth in item 22 in any lease year in which any of the Purchasers dredge...the Gulf Coast Region, by Statets, 1960-1969 Table 10. Civilian Labor Force ..... ............... . EIS-80 Table 11. 1975-85 Inclusive - Clam and...within the region and are continuously reworked by erosional forces . Shell dredging operations in the recent past have been concentrated in the southern

Potential assessment of using fly ash as a binding agent for stabilization and solidification of dredged material; Potentialbedoemning av flygaskor som bindemedelskomponent foer stabilisering och solidifiering (s/s) av muddermassor

Energy Technology Data Exchange (ETDEWEB)

Wilhelmsson, Anna; Holm, Goeran; Lagerlund, Johan; Maijala, Aino; Macsik, Josef

2010-04-15

Over the next few years, about 200 000-800 000 m3 of contaminated sediments, with a muddy, slimy texture, high water ratio and low strength, shall be dredged annually in the development of ports and maintenance dredging of navigable waterways. Dumping at sea is limited since the dredged materials are contaminated. Land disposal requires transports and land area and is thus high in costs. In the construction of new port areas, large volumes of crushed rock, etc. are normally used as construction filling materials. These materials can be replaced by stabilised and solidified dredged materials, with modified geotechnical properties. The method of stabilising/solidifying (s/s) contaminated dredged materials has been used internationally for a long period of time, and, in more recent years, also in the Nordic countries. In Sweden, for instance, the Port of Gaevle and the Port of Oxeloesund have received permissions to reuse s/s-treated contaminated dredged materials in the port structures. Reuse of the stabilised/solidified masses in a geotechnical structure is supported by the new Framework Directive (2008/98/EC) on waste where great emphasis is placed on recycling. Within the project, fly ashes were inventoried with respect to suitability and availability. Five fly ashes, both individual fly ashes and mixtures of different fly ashes, were investigated in the laboratory as a binder component in a binder mix consisting of 50% cement, 20% Merit 5000 and 30% fly ash. Sediment from the Port of Gaevle were stabilised with a binder mixture amount of 150 kg/m3. Produced samples were examined in terms of strength, permeability and leaching. An assessment of the fly ashes' potential was performed based on technological, environmental and economical aspects, as well as market demand and the acceptance of stabilised and solidified dredged materials as construction material. The results show that fly ash, together in a binder mixture with construction cement and slag cement

Some Insights to the Reuse of Dredged Marine Soils by Admixing with Activated Steel Slag

Directory of Open Access Journals (Sweden)

Chee-Ming Chan

2014-01-01

Full Text Available Regular dredging is necessary for the development of coastal regions and the maintenance of shipping channels. The dredging process dislodges sediments from the seabed, and the removed materials, termed dredged marine soils, are generally considered a geowaste for dumping. However, disposal of the dredged soils offshores can lead to severe and irreversible impact on the marine ecosystem, while disposal on land often incurs exorbitant costs with no guarantee of zero-contamination. It is therefore desirable to reuse the material, and one option is solidification with another industrial waste, that is, steel slag. This paper describes the exploratory work of admixing dredged marine soil with activated steel slag for improvement of the mechanical properties. An optimum activation concentration of NaOH was introduced to the soil-slag mixture for uniform blending. Specimens were prepared at different mix ratios then left to cure for up to 4 weeks. The unconfined compressive strength test was conducted to monitor the changes in strength at predetermined intervals. It was found that the strength does not necessarily increase with higher steel slag content, indicating an optimum slag content required for the maximum solidification effect to take place. Also, regardless of the slag content, longer curing time produces greater strength gain. In conclusion, steel slag addition to dredged sediments can effectively strengthen the originally weak soil structure by both the “cementation” and “filler” effects, though the combined effects were not distinguished in the present study.

Long-Term Management Strategy for Dredged Material Disposal for Naval Facilities at Pearl Harbor, Hawaii Phase III - Analysis of Alternatives and Development of an LTMS

National Research Council Canada - National Science Library

Palermo, Michael

2000-01-01

This report documents Phase III of a three-phase study to develop a Long-Term Management Study for disposal of dredged material unsuitable for ocean disposal from Pearl Harbor Naval Complex for the next 30 years...

Sediment Engineering thru Dredging and with Nature (SETDWN) - Fate of Fines in the Dredging and Placement Process

Science.gov (United States)

2015-05-15

operations and beach construction perspective, material is lost and a significant percent of fines is winnowed during the dredging and placement...discharged at the beach weather it is from a hopper pumpout, cuttersuction, or hydraulic offloader; experiences similar winnowing processes. The beach...of compliance with in situ percent fines criteria. This same process can be employed for the winnowing of other constituents in mixed sediments as

Characterization of metals released from coal fly ash during dredging at the Kingston ash recovery project.

Science.gov (United States)

Bednar, A J; Averett, D E; Seiter, J M; Lafferty, B; Jones, W T; Hayes, C A; Chappell, M A; Clarke, J U; Steevens, J A

2013-09-01

A storage-pond dike failure occurred on December 22, 2008 at the Tennessee Valley Authority Kingston Fossil Plant resulting in the release of over 4million cubic meters (5million cubic yards) of fly ash. Approximately half of the released ash was deposited in the main channel of the Emory River, Tennessee, USA. Remediation efforts of the Emory River focused on hydraulic dredging, as well as mechanical excavation in targeted areas. However, agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could promote dissolution and desorption of metals from the solid fly ash material. Furthermore, aeration of the dredge slurry could alter the redox state of metals in the fly ash material and thereby change their sorption, mobility, and toxicity properties. The research presented here focuses on the concentrations and speciation of metals during the fly ash recovery from the Emory River. Our results indicate that arsenite [As(III)] released from the fly ash material during dredging was slowly oxidized to arsenate [As(V)] in the slurry recovery system with subsequent removal through precipitation or sorption reactions with suspended fly ash material. Concentrations of other dissolved metals, including iron and manganese, also generally decreased in the ash recovery system prior to water discharge back to the river. Published by Elsevier Ltd.

Dredge spoil disposal off Kavaratti Island, Lakshadweep, India

Digital Repository Service at National Institute of Oceanography (India)

Chandramohan, P.; SanilKumar, V.; Jayakumar, S.

Maintenance dredging has been carried out along the navigational channel at Kavaratii Island and dredge spoil is disposed in the open sea. This paper describes the movement of sediment plume while dredging and disposal. The study indicates...

Merits of a Scenario Approach in Dredge Plume Modelling

DEFF Research Database (Denmark)

Pedersen, Claus; Chu, Amy Ling Chu; Hjelmager Jensen, Jacob

2011-01-01

Dredge plume modelling is a key tool for quantification of potential impacts to inform the EIA process. There are, however, significant uncertainties associated with the modelling at the EIA stage when both dredging methodology and schedule are likely to be a guess at best as the dredging...... contractor would rarely have been appointed. Simulation of a few variations of an assumed full dredge period programme will generally not provide a good representation of the overall environmental risks associated with the programme. An alternative dredge plume modelling strategy that attempts to encapsulate...... uncertainties associated with preliminary dredging programmes by using a scenario-based modelling approach is presented. The approach establishes a set of representative and conservative scenarios for key factors controlling the spill and plume dispersion and simulates all combinations of e.g. dredge, climatic...

WODA Technical Guidance on Underwater Sound from Dredging.

Science.gov (United States)

Thomsen, Frank; Borsani, Fabrizio; Clarke, Douglas; de Jong, Christ; de Wit, Pim; Goethals, Fredrik; Holtkamp, Martine; Martin, Elena San; Spadaro, Philip; van Raalte, Gerard; Victor, George Yesu Vedha; Jensen, Anders

2016-01-01

The World Organization of Dredging Associations (WODA) has identified underwater sound as an environmental issue that needs further consideration. A WODA Expert Group on Underwater Sound (WEGUS) prepared a guidance paper in 2013 on dredging sound, including a summary of potential impacts on aquatic biota and advice on underwater sound monitoring procedures. The paper follows a risk-based approach and provides guidance for standardization of acoustic terminology and methods for data collection and analysis. Furthermore, the literature on dredging-related sounds and the effects of dredging sounds on marine life is surveyed and guidance on the management of dredging-related sound risks is provided.

Chemical characterisation of dredged sediments in relation to their potential use in civil engineering.

Science.gov (United States)

Zuliani, Tea; Mladenovič, Ana; Ščančar, Janez; Milačič, Radmila

2016-04-01

During capital and/or maintenance dredging operations, large amounts of material are produced. Instead of their discharge, dredged sediments may be a valuable natural resource if not contaminated. One of the possible areas of application is civil engineering. In the present work, the environmental status of seaport dredged sediment was evaluated in order to investigate its potential applicability as a secondary raw material. Sediments were analysed for element concentrations in digested samples, aqueous extracts and fractions from sequential extraction; for fluoride, chloride and sulphate concentrations in aqueous extracts; and for tributyltin (TBT). Granulometric and mineralogical compositions were also analysed. The elemental impact was evaluated by calculation of the enrichment factors. The total element concentrations determined showed moderate contamination of the dredged sediments as was confirmed also by their moderate enrichment factors, presumably as a result of industrial and port activities. Elemental concentrations in the aqueous extract were very low and therefore do not represent any hazard for the environment. The water-soluble element concentrations were under the threshold levels set by the EU Directive on the landfill of waste, on the basis of which the applicability of dredged sediments in civil engineering is evaluated, while the content of chloride and sulphate were above the threshold levels. It was found out that due to the large amounts of sediment available, civil engineering applications such as the construction of embankments and backfilling is the most beneficial recycling solution at present.

Southeast Regional Implementation Manual for Requirements and Procedures for Evaluation of the Ocean Disposal of Dredged Material in Southeastern U.S. Atlantic and Gulf Coast Waters

Science.gov (United States)

This Regional Implementation Manual was prepared by EPA Region 4 to provide guidance for applicants proposing open-water disposal of dredged material in southeastern U.S. coastal waters of the Atlantic Ocean and the Gulf of Mexico.

Lightweight Aggregate Made from Dredged Material in Green Roof Construction for Stormwater Management

Directory of Open Access Journals (Sweden)

Rui Liu

2016-07-01

Full Text Available More than 1.15 million cubic meters (1.5 million cubic yards of sediment require annual removal from harbors and ports along Ohio’s Lake Erie coast. Disposing of these materials into landfills depletes land resources, while open water placement of these materials deteriorates water quality. There are more than 14,000 acres of revitalizing brownfields in Cleveland, U.S., many containing up to 90% impervious surface, which does not allow “infiltration” based stormwater practices required by contemporary site-based stormwater regulation. This study investigates the potential of sintering the dredged material from the Harbor of Cleveland in Lake Erie to produce lightweight aggregate (LWA, and apply the LWA to green roof construction. Chemical and thermal analyses revealed the sintered material can serve for LWA production when preheated at 550 °C and sintered at a higher temperature. Through dewatering, drying, sieving, pellet making, preheating, and sintering with varying temperatures (900–1100 °C, LWAs with porous microstructures are produced with specific gravities ranging from 1.46 to 1.74, and water absorption capacities ranging from 11% to 23%. The water absorption capacity of the aggregate decreases as sintering temperature increases. The LWA was incorporated into the growing media of a green roof plot, which has higher water retention capacity than the conventional green roof system.

40 CFR 228.15 - Dumping sites designated on a final basis.

Science.gov (United States)

2010-07-01

... mile. (iii) Depth: Ranges from 200 to 400 meters. (iv) Primary Use: Dredged material. (v) Period of Use... meters. (iv) Primary use: Dredged material. (v) Period of use: Continuing use. (vi) Restriction: Disposal.... (iii) Depth: Average 90 meters. (iv) Exclusive Use: Dredged material. (v) Period of Use: Continuing...

PHYTOREMEDIATION OF DREDGED SEDIMENTS: A CASE STUDY AT THE JONES ISLAND CDF

Science.gov (United States)

The Jones Island Confined Disposal Facility (CDF) is a 44 acre in-lake area that receives dredged material from Milwaukee Harbor and the surrounding waterways. Some of those materials are contaminated with industrial waste and urban run-off. The CDF is nearing the end of its desi...

Effects of dredged sediment disposal on the coastal marine macrobenthic assemblage in Southern Brazil

Directory of Open Access Journals (Sweden)

L. G. Angonesi

Full Text Available The aim of this study was to evaluate the deposition impact of dredged material from Patos lagoon estuary on a benthic macroinvertebrate assemblage structure in an adjacent coastal marine area. Nine sampling stations were chosen at random in the disposal area, and nine others in the same way in an adjacent control area. Samples were collected at a 19 m depth before sediment disposal (11 July 2000, during dredging and disposal operations (25 Oct. 2000, and three months thereafter (24 Aug. 2001. Statistical analysis indicated that sampling periods presented similar characteristics in both the control and disposal sites. Disposal of dredged sediment from Patos lagoon had no detectable detrimental effects upon macrobenthic faunal assemblage at the dumping site. This result is attributed both to adaptation of resident biota to dynamic sedimentary conditions and to the fine estuarine sediment dredged, the dispersion of which in the water column might have minimized sediment deposition and consequent damage to the benthic fauna.

Ross Sea Mollusca from the Latitudinal Gradient Program: R/V Italica 2004 Rauschert dredge samples

Directory of Open Access Journals (Sweden)

Claudio Ghiglione

2013-10-01

Full Text Available Information regarding the molluscs in this dataset is based on the Rauschert dredge samples collected during the Latitudinal Gradient Program (LGP on board the R/V “Italica” in the Ross Sea (Antarctica in the austral summer 2004. A total of 18 epibenthic dredge deployments/samplings have been performed at four different locations at depths ranging from 84 to 515m by using a Rauschert dredge with a mesh size of 500µm. In total 8,359 specimens have been collected belonging to a total of 161 species. Considering this dataset in terms of occurrences, it corresponds to 505 discrete distributional records (incidence data. Of these, in order of abundance, 5,965 specimens were Gastropoda (accounting for 113 species, 1,323 were Bivalvia (accounting for 36 species, 949 were Aplacophora (accounting for 7 species, 74 specimens were Scaphopoda (3 species, 38 were Monoplacophora (1 species and, finally, 10 specimens were Polyplacophora (1 species. This data set represents the first large-scale survey of benthic micro-molluscs for the area and provides important information about the distribution of several species, which have been seldom or never recorded before in the Ross Sea. All vouchers are permanently stored at the Italian National Antarctic Museum (MNA, Section of Genoa, enabling future comparison and crosschecking. This material is also currently under study, from a molecular point of view, by the barcoding project “BAMBi” (PNRA 2010/A1.10.

Beneficial Uses of Dredged Material. Proceedings of the Gulf Coast Regional Workshop Held on 26-28 April 1988 in Galveston, Texas

Science.gov (United States)

1990-02-01

COL John Tudela, Commander of the Galveston District, US Army Corps of Engineers. As a former Pharmacist Mate, third class in the US Marine Corps, I... uti - lizing material from maintenance dredging at the entrance to the harbor. The port commission has lands and containment facilities prepared for...sensitivity. When considering disposal techniques, it is useful to retrace man’s uti - lization of estuaries and waterways. From earliest times, settlement

Agricultural Rivers at Risk: Dredging Results in a Loss of Macroinvertebrates. Preliminary Observations from the Narew Catchment, Poland

Directory of Open Access Journals (Sweden)

Mateusz Grygoruk

2015-08-01

Full Text Available Ecosystem deterioration in small lowland agricultural rivers that results from river dredging entails a significant threat to the appropriate ecohydrological conditions of these water bodies, expressed as homogenization of habitats and loss of biodiversity. Our study was aimed at a comparison of abundance and taxonomic structure of bottom-dwelling macroinvertebrates in dredged and non-dredged stretches of small lowland rivers and tributaries of the middle Narew River, namely: Czaplinianka, Turośnianka, Dąb, and Ślina. The experimental setup was (1 to collect samples of the bottom material from the river stretches that either persisted in a non-modified state (dredging was not done there in the last few years or had been subjected to river dredging in the year of sampling; and (2 to analyze the abundance and taxonomic structure of macroinvertebrates in the collected samples. The study revealed that at the high level of statistical significance (from p = 0.025 to p = 0.001, the total abundance of riverbed macroinvertebrates in the dredged stretches of the rivers analyzed was approximately 70% lower than in non-dredged areas. We state that the dredging of small rivers in agricultural landscapes seriously affects their ecological status by negatively influencing the concentrations and species richness of benthic macroinvertebrates.

Geotechnical and mineralogical characterisations of marine-dredged sediments before and after stabilisation to optimise their use as a road material.

Science.gov (United States)

Saussaye, L; van Veen, E; Rollinson, G; Boutouil, M; Andersen, J; Coggan, J

2017-12-01

Dredging activities to extend, deepen and maintain access to harbours generate significant volumes of waste dredged material. Some ways are investigated to add value to these sediments. One solution described here is their use in road construction following treatment with hydraulic binders. This paper presents the characterisation of four sediments, in their raw state and after 90 days of curing following stabilisation treatment with lime and cement, using a combination of novel and established analytical techniques to investigate subsequent changes in mineralogy. These sediments are classified as fine, moderately to highly organic and highly plastic and their behaviour is linked to the presence of smectite clays. The main minerals found in the sediments using X-ray diffraction (XRD) and automated mineralogy are quartz, calcite, feldspars, aluminium silicates, pyrite and halite. Stabilisation was found to improve the mechanical performances of all the sediments. The formation of cementitious hydrates was not specifically detected using automated mineralogy or XRD. However, a decrease in the percentage volume of aluminium silicates and aluminium-iron silicates and an increase of the percentage volume of feldspars and carbonates was observed.

Projected entrainment of fish resulting from aggregate dredging

International Nuclear Information System (INIS)

Drabble, Ray

2012-01-01

Previous research to assess impacts from aggregate dredging has focussed on infaunal species with few studies made of fish entrainment. Entrainment evidence from hydraulic dredging studies is reviewed to develop a sensitivity index for benthic fish. Environmental monitoring attendant with the granting of new licences in the Eastern Channel Region (ECR) in 2006 offers a unique opportunity to assess the effects of dredging upon fish. Projected theoretical fish entrainment rates are calculated based upon: abundance data from 4m beam trawl sampling of fish species over the period 2005–2008; sensitivity data; and dredging activity and footprint derived from Electronic monitoring System (EMS) data. Results have been compared with actual entrainment rates and also against summary results from independent analysis of the changes in fish population over the period 2005–2008 (). The case is made for entrainment surveys to form part of impact monitoring for marine aggregate dredging.

Dredging in Sediments Containing Munitions and Explosives of Concern (MEC)

National Research Council Canada - National Science Library

Welp, Timothy; Follett, George; Crull, Michelle; Pollock, Cheryl

2008-01-01

.... This report describes the different types of dredges and dredging projects that can encounter MEC, describes how these dredges' operational methodologies can be impacted by MEC, and summarizes past...

Predicting dredging-associated effects to coral reefs in Apra Harbor, Guam - Part 1: Sediment exposure modeling.

Science.gov (United States)

Gailani, Joseph Z; Lackey, Tahirih C; King, David B; Bryant, Duncan; Kim, Sung-Chan; Shafer, Deborah J

2016-03-01

Model studies were conducted to investigate the potential coral reef sediment exposure from dredging associated with proposed development of a deepwater wharf in Apra Harbor, Guam. The Particle Tracking Model (PTM) was applied to quantify the exposure of coral reefs to material suspended by the dredging operations at two alternative sites. Key PTM features include the flexible capability of continuous multiple releases of sediment parcels, control of parcel/substrate interaction, and the ability to efficiently track vast numbers of parcels. This flexibility has facilitated simulating the combined effects of sediment released from clamshell dredging and chiseling within Apra Harbor. Because the rate of material released into the water column by some of the processes is not well understood or known a priori, the modeling approach was to bracket parameters within reasonable ranges to produce a suite of potential results from multiple model runs. Sensitivity analysis to model parameters is used to select the appropriate parameter values for bracketing. Data analysis results include mapping the time series and the maximum values of sedimentation, suspended sediment concentration, and deposition rate. Data were used to quantify various exposure processes that affect coral species in Apra Harbor. The goal of this research is to develop a robust methodology for quantifying and bracketing exposure mechanisms to coral (or other receptors) from dredging operations. These exposure values were utilized in an ecological assessment to predict effects (coral reef impacts) from various dredging scenarios. Copyright © 2015. Published by Elsevier Ltd.

The Performance of Nearshore Dredge Disposal at Ocean Beach, San Francisco, California, 2005-2007

Science.gov (United States)

Barnard, Patrick L.; Erikson, Li H.; Hansen, Jeff E.; Elias, Edwin

2009-01-01

Ocean Beach, California, contains an erosion hot spot in the shadow of the San Francisco ebb tidal delta that threatens valuable public infrastructure as well as the safe recreational use of the beach. In an effort to reduce the erosion at this location a new plan for the management of sediment dredged annually from the main shipping channel at the mouth of San Francisco Bay was implemented in May 2005 by the United States Army Corps of Engineers, San Francisco District (USACE). The USACE designated a temporary nearshore dredge disposal site for the annual disposal of about 230,000 m3 (300,000 yd3) of sand about 750 m offshore and slightly south of the erosion hot spot, in depths between approximately 9 and 14 m. The site has now been used three times for a total sediment disposal of about 690,000 m3 (about 900,000 yds3). The disposal site was chosen because it is in a location where strong tidal currents and open-ocean waves can potentially feed sediment toward the littoral zone in the reach of the beach that is experiencing critical erosion, as well as prevent further scour on an exposed outfall pipe. The onshore migration of sediment from the target disposal location might feed the primary longshore bar or the nearshore zone, and provide a buffer to erosion that peaks during winter months when large waves impact the region. The United States Geological Survey (USGS) has been monitoring and modeling the bathymetric evolution of the test dredge disposal site and the adjacent coastal region since inception in May 2005. This paper reports on the first 2.5 years of this monitoring program effort (May 2005 to December 2007) and assesses the short-term coastal response. Here are the key findings of this report: *Approximately half of the sediment that has been placed in the nearshore dredge-disposal site during the 2.5 years of this study remains within the dredge focus area. *In the winter of 2006-7, large waves transported the dredge-mound material onshore. *High

Efficient dredging strategies for improving transportation infrastructure resilience : August 1, 2014 - December 31, 2016 : final research report.

Science.gov (United States)

2017-02-01

The inland navigation system is highly dependent on uncertain natural factors such as shoaling that can render waterways unnavigable. In order to ensure waterway navigability, maintenance dredging must be completed. We consider the problem of selecti...

Decontamination and functional reclamation of dredged brackish sediments.

Science.gov (United States)

Doni, S; Macci, C; Peruzzi, E; Iannelli, R; Ceccanti, B; Masciandaro, G

2013-07-01

The continuous stream of sediments, dredged from harbors and waterways for keeping shipping traffic efficiency, is a considerable ongoing problem recognized worldwide. This problem gets worse as most of the sediments dredged from commercial ports and waterways turn out to be polluted by a wide range of organic and inorganic contaminants. In this study, phytoremediation was explored as a sustainable reclamation technology for turning slightly-polluted brackish dredged sediments into a matrix feasible for productive use. To test this possibility, a phytoremediation experimentation was carried out in containers of about 0.7 m(3) each, filled with brackish dredged sediments contaminated by heavy metals and hydrocarbons. The sediments were pre-conditioned by adding an agronomic soil (30 % v/v) to improve their clayey granulometric composition, and by topping the mixture with high quality compost (4 kg m(-2)) to favour the initial adaptation of the selected vegetal species. The following plant treatments were tested: (1) Paspalum vaginatum, (2) Phragmites australis, (3) Spartium junceum + P. vaginatum, (4) Nerium oleander + P. vaginatum, (5) Tamarix gallica + P. vaginatum, and (6) unplanted control. Eighteen months after the beginning of the experimentation, all the plant species were found in healthy condition and well developed. Throughout the whole experiment, the monitored biological parameters (total microbial population and dehydrogenase activity) were generally observed as constantly increasing in all the planted sediments more than in the control, pointing out an improvement of the chemico-physical conditions of both microorganisms and plants. The concentration decrease of organic and inorganic contaminants (>35 and 20 %, respectively) in the treatments with plants, particularly in the T. gallica + P. vaginatum, confirmed the importance of the root-microorganism interaction in activating the decontamination processes. Finally, the healthy state of

An 'Early Warning System' for the prevention of dredging potential impacts on sensitive areas

Science.gov (United States)

Piermattei, Viviana; Martellucci, Riccardo; Pierattini, Alberto; Bonamano, Simone; Paladini de Mendoza, Francesco; Albani, Marta; Stefanì, Chiara; Madonia, Alice; Fersini, Giorgio; Marcelli, Marco

2016-04-01

Coastal marine ecosystems are increasingly subject to multiple pressures and stressors produced by the effects of human activities. Intense and frequent disturbances which affect marine environment can derive from dredging activity, which is a fundamental management for most ports and harbours. The potential environmental effects of dredging procedures are generally due to the excavation of material from the sea bottom and the relocation elsewhere for disposal, overflow from the dredger and loss of material from pipelines during transport. Depending on the location and the intensity of these activities the marine environment, particularly sensitive areas, may be affected by dredging. The main environmental effects can be associated with suspended sediments and increases in turbidity into the water column, which can have adverse effects on marine animals and plants by reducing light penetration and by physical disturbance. For this reason it is fundamental to implement a real time monitoring system to control and prevent negative effects, enabling a rapid response to adverse water quality conditions and a fast activation of mitigation procedures, in agreement with all the reference authorities. In this work we present the development of an innovative 'Early Warning System' based on fixed stations, ad hoc in situ surveys and forecasting models, which was applied to a dredging activity carried out in the Gulf of Gaeta (Latium, Italy). It represents an extension of the C-CEMS (Civitavecchia Coastal Environmental Monitoring System) network, which is operative in the Tyrrhenian sea since 2005.

Temporal Patterns in Seawater Quality from Dredging in Tropical Environments.

Directory of Open Access Journals (Sweden)

Ross Jones

Full Text Available Maintenance and capital dredging represents a potential risk to tropical environments, especially in turbidity-sensitive environments such as coral reefs. There is little detailed, published observational time-series data that quantifies how dredging affects seawater quality conditions temporally and spatially. This information is needed to test realistic exposure scenarios to better understand the seawater-quality implications of dredging and ultimately to better predict and manage impacts of future projects. Using data from three recent major capital dredging programs in North Western Australia, the extent and duration of natural (baseline and dredging-related turbidity events are described over periods ranging from hours to weeks. Very close to dredging i.e. <500 m distance, a characteristic features of these particular case studies was high temporal variability. Over several hours suspended sediment concentrations (SSCs can range from 100-500 mg L-1. Less turbid conditions (10-80 mg L-1 can persist over several days but over longer periods (weeks to months averages were <10 mg L-1. During turbidity events all benthic light was sometimes extinguished, even in the shallow reefal environment, however a much more common feature was very low light 'caliginous' or daytime twilight periods. Compared to pre-dredging conditions, dredging increased the intensity, duration and frequency of the turbidity events by 10-, 5- and 3-fold respectively (at sites <500 m from dredging. However, when averaged across the entire dredging period of 80-180 weeks, turbidity values only increased by 2-3 fold above pre-dredging levels. Similarly, the upper percentile values (e.g., P99, P95 of seawater quality parameters can be highly elevated over short periods, but converge to values only marginally above baseline states over longer periods. Dredging in these studies altered the overall probability density distribution, increasing the frequency of extreme values. As

The Effect of Binder and Waste Granular Materials (WGM on the Shear Strength and Shear Resistance of Dredged Marine Soils (DMS

Directory of Open Access Journals (Sweden)

Rosman Mohammad Zawawi

2017-01-01

Full Text Available Dredged marine soil (DMS is considered as weak and soft problematic soil. It is possible to give this type of soil a second life if only its geotechnical properties are improved. Infusing soil with solidification agent is the common practice of soil improvement. This study uses binder and waste granular material (WGM such as cement, bottom ash (BA and palm oil clinker (POC. The aforementioned materials are capable to fortify the poor features of the soil. Series numbers of soil bed samples were tested for its shear strength and shear resistance. Test results show that the mentioned soil parameters were corresponded with each other. In short, geo-waste and biomass materials are possible to be reused instead of being discarded.

Appearance and water quality of turbidity plumes produced by dredging in Tampa Bay, Florida

Science.gov (United States)

Goodwin, Carl R.; Michaelis, D.M.

1984-01-01

Turbidity plumes in Tampa Bay, Florida, produced during ship-channel dredging operations from February 1977 to August 1978, were monitored in order to document plume appearance and water quality, evaluate plume influence on the characteristics of Tampa Bay water, and provide a data base for comparison with other areas that have similar sediment, dredge, placement, containment, and tide conditions. The plumes investigated originated from the operation of one hopper dredge and three cutterhead-pipeline dredges. Composition of bottom sediment was found to vary from 85 percent sand and shell fragments to 60 percent silt and clay. Placement methods for dredged sediment included beach nourishment, stationary submerged discharge, oscillating surface discharge, and construction of emergent dikes. Tidal currents ranged from slack water to flow velocities of 0.60 meter per second. Plumes were monitored simultaneously by (1) oblique and vertical 35-millimeter aerial photography and (2) water-quality sampling to determine water clarity and concentrations of nutrients, metals, pesticides, and industrial compounds. Forty-nine photographs depict plumes ranging in length from a few tens of meters to several kilometers and ranging in turbidity level from hopper-dredge unloading operations also produced plumes of low visibility. Primary turbidity plumes were produced directly by dredging and placement operations; secondary plumes were produced indirectly by resuspension of previously deposited material. Secondary plumes were formed both by erosion, in areas of high-velocity tidal currents, and by turbulence from vessels passing over fine material deposited in shallow areas. Where turbidity barriers were not used, turbidity plumes visible at the surface were good indicators of the location of turbid water at depth. Where turbidity barriers were used, turbid bottom water was found at locations having no visible surface plumes. A region of rapidly accelerating then decelerating flow

Physical and biological impact on marine benthic Polychaetes due to dredging in the Mormugao harbour, Goa and its restoration after dredging

Digital Repository Service at National Institute of Oceanography (India)

Rathod, V.

The proportion of gravel in the sediment of the dredged site increased after-dredging, while that of organic matter decreased The impact on community was estimated at species level, using both univariate and multivariate analyses Maximum negative effect...

Ecological evaluation of proposed dredged material from Richmond Harbor

International Nuclear Information System (INIS)

Pinza, M.R.; Ward, J.A.; Mayhew, H.L.; Word, J.Q.; Niyogi, D.K.; Kohn, N.P.

1992-10-01

During the summer of 1991, Battelle/Marine Sciences Laboratory (MSL) was contracted to conduct sampling and testing of sediments proposed for dredging of Richmond Harbor, California. The MSL collected sediment cores to a depth of -40 ft MLLW (-38 ft + 2 ft overdepth) from 28 (12-in. core) and 30 (4-in. core) stations. The sediment cores were allocated to six composite samples referred to as sediment treatments, which were then subjected to physical, chemical, toxicological, and bioaccumulation testing. Physical and chemical parameters included grain size, total organic carbon (TOC), total volatile solids (TVS), oil and grease, total petroleum hydrocarbons (TPH), polynuclear aromatic hydrocarbons (PAH), chlorinated pesticides, polychlorinated biphenyis (PCBs), priority pollutant metals, and butyltins. The results from the test treatments were compared to results from five reference treatments representative of potential in-bay and offshore disposal sites

Ecological evaluation of proposed dredged material from Richmond Harbor

Energy Technology Data Exchange (ETDEWEB)

Pinza, M R; Ward, J A; Mayhew, H L; Word, J Q; Niyogi, D K; Kohn, N P [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1992-10-01

During the summer of 1991, Battelle/Marine Sciences Laboratory (MSL) was contracted to conduct sampling and testing of sediments proposed for dredging of Richmond Harbor, California. The MSL collected sediment cores to a depth of [minus]40 ft MLLW ([minus]38 ft + 2 ft overdepth) from 28 (12-in. core) and 30 (4-in. core) stations. The sediment cores were allocated to six composite samples referred to as sediment treatments, which were then subjected to physical, chemical, toxicological, and bioaccumulation testing. Physical and chemical parameters included grain size, total organic carbon (TOC), total volatile solids (TVS), oil and grease, total petroleum hydrocarbons (TPH), polynuclear aromatic hydrocarbons (PAH), chlorinated pesticides, polychlorinated biphenyis (PCBs), priority pollutant metals, and butyltins. The results from the test treatments were compared to results from five reference treatments representative of potential in-bay and offshore disposal sites.

Short-term impact of blue mussel dredging ( Mytilus edulis L.) on a benthic community

DEFF Research Database (Denmark)

Dolmer, Per; Kristensen, T.; Christiansen, M.L.

2001-01-01

The short-term effect of mussel dredging in a brackish Danish sound was studied. A commercial dredging track was identified and an analysis of the species composition inside the track and at an adjacent control area showed that dredging changed the community structure by reducing the density...... of polychaetes. In order to investigate the extent and the duration of the dredging impact experimental dredging was conducted. The experimental dredging removed 50% of the mussels in two dredged areas. Immediately after dredging, a significantly lower number of species was measured inside the mussel beds...... in dredged areas compared to control and boundary areas. This effect lasted for at least 40 days. The analysis of the species composition showed that the dredged area had a significantly lower density, particularly of polychaetes compared to the boundary area. An increased number of species was recorded...

Dangerous compounds in the dredged material from the sea - Assessment of the current approach to the evaluation of contaminations based on the data from the Polish coastal zone (the Baltic Sea).

Science.gov (United States)

Staniszewska, Marta; Boniecka, Helena

2018-05-01

It has been shown that the current approach to the assessment of contamination in the sediments obtained during the dredging works in the Baltic countries indicates the presence of "non-contaminated" dredged material. The concentration limits of heavy metals, Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorinated Biphenyls (PCBs) have been exceeded only in 1% of the samples obtained during the dredging works (2005-2015) within the Polish coastal zone. After 2008, no contaminated sediments have been found. Also, in the remaining Baltic countries, sediments are very rarely contaminated. As a result of this assessment, the sediments can be stored in the sea or have a practical application. However, it has been questioned whether the large cost of determining the numerous chemical parameters is justified. It has been proposed to carry out simple screening tests. Following the preliminary screening, the decision on more detailed (and expensive) chemical tests of individual pollutants would be made. Copyright © 2018 Elsevier Ltd. All rights reserved.

Toxicity of harbour canal sediments before dredging and after off shore disposal

NARCIS (Netherlands)

Van den Hurk, P.; Eertman, R.H.M.; Stronkhorst, J.

1997-01-01

Dredge material from an entrance waterway to the port of Rotterdam and sediments from the North Sea off-shore disposal site were tested for toxicity using three different sediment bioassays, The goals of the study were to evaluate if bioassays generate useful additional information to chemical based

Mussel dredging: Impact on epifauna in Limfjorden, Denmark

DEFF Research Database (Denmark)

Dolmer, Per

2002-01-01

Species composition and population density of epibenthos are described in two areas in Limfjorden, Denmark. Both areas covered both a mussel fishing ground and an area that has been permanently closed for mussel dredging since 1988. Furthermore, mussels were dredged in a part of the mussel fishing...... grounds in both areas four months before the investigations. The rest of the fishing grounds had not been exploited for at least four years. This study describes the short-term impact (4 mo) and long-term impact (>4 y) of mussel dredging using the permanently closed areas as controls. The data were...... analyzed by multivariate statistics. In both short-term study areas significant effects of dredging were observed. A number of taxa (sponges, echinoderms, anthozoans, molluscs, crustaceans, and ascidians) had a reduced density or were not observed in fished areas four months after the fishing was ended...

WODA technical guidance on underwater sound from dredging

NARCIS (Netherlands)

Thomsen, F.; Borsani, F.; Clarke, D.; Jong, C. de; Wit, P. de; Goethals, F.; Holtkamp, M.; Martin, E.S.; Spadaro, P.; Raalte, G. van; Victor, G.Y.V.; Jensen, A.

2016-01-01

The World Organization of Dredging Associations (WODA) has identified underwater sound as an environmental issue that needs further consideration. A WODA Expert Group on Underwater Sound (WEGUS) prepared a guidance paper in 2013 on dredging sound, including a summary of potential impacts on aquatic

Dredging Operations Technical Support Program: Engineering Design and Environmental Assessment of Dredged Material Overflow from Hydraulically Filled Hopper Barges in Mobile Bay, Alabama

Science.gov (United States)

1990-09-01

turbid estuarine habitats such as Mobile Bay are very tolerant of moderately high concentrations of suspended sediments and thin layers of sediment...GULF OF MEXIC BAYOU 4M 2CAE SI2LTK Fiur 3. DsrbuinoAedmnTyesi oie a fo IsphordingLT anCLmb190 PART III: DREDGING EQUIPMENT AND OPERATIONAL TECHNIQUES...increase in ambient turbidity was noted. Water samples were collected at surface, middepth, and bottom. The sampling boats proceeded across their

Proposal of industrialization process of dredged sediments

Directory of Open Access Journals (Sweden)

Rachid Hadj Sadok

2018-01-01

Full Text Available Our study will focus on life cycle assessment (LCA of dredged sediments in its environment from sediment extraction to waste treatment. This tool is part of an environmental management approach, to compare the environmental loads of the different stages of the life cycle of the same product and to deduce which stage of the scenario is the most polluting in environmental terms. Optimize the modeling of industrialization process of dredged sediments using the SimaPro 8.2.3 software to propose a model that is the most respectful of the environment. We will focus on the environmental impacts; we will try to propose the most environmentally friendly scenario to exploit these dredged sediments in the field of building construction.

Stabilization of dredged spoils for pavement construction in the ...

African Journals Online (AJOL)

Natural soils underlying the East-West road are mainly clay and silt of poor quality ... on the dredged soils included particle size distribution, compaction and California Bearing Ratio. Cement stabilization was performed on the dredged spoil.

Spatial Patterns in Water Quality Changes during Dredging in Tropical Environments

Science.gov (United States)

Fisher, Rebecca; Stark, Clair; Ridd, Peter; Jones, Ross

2015-01-01

Dredging poses a potential risk to tropical ecosystems, especially in turbidity-sensitive environments such as coral reefs, filter feeding communities and seagrasses. There is little detailed observational time-series data on the spatial effects of dredging on turbidity and light and defining likely footprints is a fundamental task for impact prediction, the EIA process, and for designing monitoring projects when dredging is underway. It is also important for public perception of risks associated with dredging. Using an extensive collection of in situ water quality data (73 sites) from three recent large scale capital dredging programs in Australia, and which included extensive pre-dredging baseline data, we describe relationships with distance from dredging for a range of water quality metrics. Using a criterion to define a zone of potential impact of where the water quality value exceeds the 80th percentile of the baseline value for turbidity-based metrics or the 20th percentile for the light based metrics, effects were observed predominantly up to three km from dredging, but in one instance up to nearly 20 km. This upper (~20 km) limit was unusual and caused by a local oceanographic feature of consistent unidirectional flow during the project. Water quality loggers were located along the principal axis of this flow (from 200 m to 30 km) and provided the opportunity to develop a matrix of exposure based on running means calculated across multiple time periods (from hours to one month) and distance from the dredging, and summarized across a broad range of percentile values. This information can be used to more formally develop water quality thresholds for benthic organisms, such as corals, filter-feeders (e.g. sponges) and seagrasses in future laboratory- and field-based studies using environmentally realistic and relevant exposure scenarios, that may be used to further refine distance based analyses of impact, potentially further reducing the size of the dredging

Spatial Patterns in Water Quality Changes during Dredging in Tropical Environments.

Science.gov (United States)

Fisher, Rebecca; Stark, Clair; Ridd, Peter; Jones, Ross

2015-01-01

Dredging poses a potential risk to tropical ecosystems, especially in turbidity-sensitive environments such as coral reefs, filter feeding communities and seagrasses. There is little detailed observational time-series data on the spatial effects of dredging on turbidity and light and defining likely footprints is a fundamental task for impact prediction, the EIA process, and for designing monitoring projects when dredging is underway. It is also important for public perception of risks associated with dredging. Using an extensive collection of in situ water quality data (73 sites) from three recent large scale capital dredging programs in Australia, and which included extensive pre-dredging baseline data, we describe relationships with distance from dredging for a range of water quality metrics. Using a criterion to define a zone of potential impact of where the water quality value exceeds the 80th percentile of the baseline value for turbidity-based metrics or the 20th percentile for the light based metrics, effects were observed predominantly up to three km from dredging, but in one instance up to nearly 20 km. This upper (~20 km) limit was unusual and caused by a local oceanographic feature of consistent unidirectional flow during the project. Water quality loggers were located along the principal axis of this flow (from 200 m to 30 km) and provided the opportunity to develop a matrix of exposure based on running means calculated across multiple time periods (from hours to one month) and distance from the dredging, and summarized across a broad range of percentile values. This information can be used to more formally develop water quality thresholds for benthic organisms, such as corals, filter-feeders (e.g. sponges) and seagrasses in future laboratory- and field-based studies using environmentally realistic and relevant exposure scenarios, that may be used to further refine distance based analyses of impact, potentially further reducing the size of the dredging

Study of Morphologic Change in Poyang Lake Basin Caused by Sand Dredging Using Multi-temporal Landsat Images and DEMs

Science.gov (United States)

Qi, S.; Zhang, X.; Wang, D.; Zhu, J.; Fang, C.

2014-11-01

Sand dredging has been practiced in rivers, lakes, harbours and coastal areas in recent years in China mostly because of demand from construction industry as building material. Sand dredging has disturbed aquatic ecosystems by affecting hydrological processes, increasing content of suspended sediments and reducing water clarity. Poyang Lake, connecting with Yangtze River in the lower reaches of the Yangtze River, is the largest fresh water lake in China. Sand dredging in Poyang Lake has been intensified since 2001 because such practice was banned in Yangtze River and profitable. In this study, the morphologic change caused by sand dredging in Poyang Lake basin was analysed by overlaying two DEMs acquired in 1952 and 2010 respectively. Since the reflectance of middle infrared band for sand dredging vessel is much higher than that of water surface, sand dredging vessels were showed as isolated grey points and can be counted in the middle infrared band in 12 Landsat images acquired in flooding season during 2000~2010. Another two Landsat images (with low water level before 2000 and after 2010) were used to evaluate the morphologic change by comparing inundation extent and shoreline shape. The following results was obtained: (1) vessels for sand dredging are mainly distributed in the north of Poyang Lake before 2007, but the dredging area was enlarged to the central region and even to Gan River; (2) sand dredging area reached to about 260.4 km2 and is mainly distributed in the north of Songmen Mountain and has been enlarged to central of Poyang Lake from the distribution of sand vessels since 2007. Sand dredged from Poyang Lake was about 1.99 × 109 m3 or 2448 Mt assuming sediment bulk density of 1.23 t m-3. It means that the magnitude of sand mining during 2001-2010 is almost ten times of sand depositions in Poyang Lake during 1955-2010; (3) Sand dredging in Poyang Lake has alternated the lake capacity and discharge section area, some of the watercourse in the

Morphological Response of a Mud Capped Dredge Pit in Western Louisiana After Sand Excavation for Barrier Island Restoration

Science.gov (United States)

Robichaux, P. A.; Xu, K.; Bentley, S. J.; Li, C.; Miner, M. D.

2017-12-01

Sand resources play a crucial role in supporting tourism, maintaining coastal ecosystems, and protecting property and infrastructure. Mud capped dredge pits (MCDPs) are created when paleochannel sand, covered by muddy shelf overburden, is excavated for restoration purposes; such paleochannels are one significant sand resource for coastal barrier protection. However, our knowledge of MCDPs is limited. To improve understanding of their morphological behavior, a dredge pit called Peveto Channel (PC) offshore of Holly Beach, LA, was studied in 2016. Our study consisted of a survey using multiple geophysical methods, including multibeam bathymetry, sidescan sonar, subbottom profiling, and magnetometry. Results indicate that PC has undergone 100% infilling since dredging occurred. Although the pit is filled up, analyses indicate the newly deposited material is unconsolidated and has yet to equilibrate to the ambient seafloor conditions. The surface of the pit area is pockmarked and uneven, likely caused by degassing processes and differential consolidation. Sidescan sonar images confirm that the pit walls have experienced little to no lateral erosion and are well preserved. The results from this survey and from historical surveys conducted in 2003 (a few months after dredging), 2004, 2006, and 2007 are compared to previously constructed numerical models used to predict the behavior of dredge pits. To our knowledge, PC is the only filled-up offshore dredge pit in coastal Louisiana. Thus the findings of this study provide new long-term information for regulatory policies and the feasibility of MCDPs as sand resources in the future.

Water injection dredging

NARCIS (Netherlands)

Verhagen, H.J.

2000-01-01

Some twenty years ago WIS-dredging has been developed in the Netherlands. By injecting water into the mud layer, the water content of the mud becomes higher, it becomes fluid mud and will start to flow. The advantages of this system are that there is no need of transporting the mud in a hopper, and

Risk-based decision-making framework for the selection of sediment dredging option.

Science.gov (United States)

Manap, Norpadzlihatun; Voulvoulis, Nikolaos

2014-10-15

The aim of this study was to develop a risk-based decision-making framework for the selection of sediment dredging option. Descriptions using case studies of the newly integrated, holistic and staged framework were followed. The first stage utilized the historical dredging monitoring data and the contamination level in media data into Ecological Risk Assessment phases, which have been altered for benefits in cost, time and simplicity. How Multi-Criteria Decision Analysis (MCDA) can be used to analyze and prioritize dredging areas based on environmental, socio-economic and managerial criteria was described for the next stage. The results from MCDA will be integrated into Ecological Risk Assessment to characterize the degree of contamination in the prioritized areas. The last stage was later described using these findings and analyzed using MCDA, in order to identify the best sediment dredging option, accounting for the economic, environmental and technical aspects of dredging, which is beneficial for dredging and sediment management industries. Copyright © 2014 Elsevier B.V. All rights reserved.

[Startup mechanism of moxibustion warming and dredging function].

Science.gov (United States)

Huang, Kaiyu; Liang, Shuang; Sun, Zheng; Zhang, Jianbin

2017-09-12

With "moxibustion" and "warm stimulation" as the keywords, the literature on moxibustion mechanism of warming and dredging from June 1st, 1995 to June 1st, 2016 was collected from PubMed, China National Knowledge Infrastructure (CNKI) and Wanfang database. The startup mechanism of moxibustion warming and dredging function was analyzed in terms of moxibustion warming stimulation. The results were found that moxibustion was based on local rising temperature of acupoint. It activated local specific receptors, heat sensitive immune cells, heat shock proteins and so on to start the warming and dredging function and produce various local effects. The warming stimulation signals as well as subsequent effects through nerve and body fluid pathways induced the effects of further specific target organs and body systems.

stabilization of dredged spoils for pavement construction in the niger

African Journals Online (AJOL)

Dr. Tse

Natural soils underlying the East-West road are mainly clay and silt of poor quality ... on the dredged soils included particle size distribution, compaction and California ... KEYWORDS: Stabilization, dredge spoil, pavement, Niger Delta, cement.

Impact of pozzolanic binder addition on stabilization of polluted dredged sediments on its potential reuse as a new material resource for road construction in Basse Normandie, France

Science.gov (United States)

Silitonga, E.

2018-02-01

Due to the increase of the amount of marine dredged sediments (MDS) and the cost of managing the disposal site is very high, a reutilization of dredged sediment is urgently needed in France. The primary goal of this research is to find a domain for reuse of MDS materials as a new material regarding the environmental issues, and other requirement needed. In this study, the MDS was used as replacement material in road construction. Hence, various tests need to be realized to identify if MDS could achieve the requirement needed in this domain. The secondary objective is to enhance the geotechnical characteristic and to reduce the pollution content of the MDS, by incorporating binders and sediments, and revealed the geotechnical characteristic. The geotechnical test result shows that the stabilization by hydraulics binders improve the geotechnical characteristic and could fulfil the requirement needed. The present of Fly Ash and Silica Fume in this study is aimed to reduce the pollution level, especially the heavy metal content. After the geotechnical study in laboratory results shows as expected then the study to identify the chemical characteristic was realized. In order to evaluate the environmental impacts, leaching test was performed. The Leaching test result shows that with 7% of Silica Fume and 10% of Fly Ash capable to fulfil the criteria needed, hence, the use of MDS is consider safe in term of geotechnical and environmental impact, as a new material in road construction

Methods and Metrics for Evaluating Environmental Dredging ...

Science.gov (United States)

This report documents the objectives, approach, methodologies, results, and interpretation of a collaborative research study conducted by the National Risk Management Research Laboratory (NRMRL) and the National Exposure Research laboratory (NERL) of the U.S. Environmental Protection Agency’s (U.S. EPA’s) Office of Research and Development (ORD) and the U.S. EPA’s Great Lakes National Program Office (GLNPO). The objectives of the research study were to: 1) evaluate remedy effectiveness of environmental dredging as applied to contaminated sediments in the Ashtabula River in northeastern Ohio, and 2) monitor the recovery of the surrounding ecosystem. The project was carried out over 6 years from 2006 through 2011 and consisted of the development and evaluation of methods and approaches to assess river and ecosystem conditions prior to dredging (2006), during dredging (2006 and 2007), and following dredging, both short term (2008) and long term (2009-2011). This project report summarizes and interprets the results of this 6-year study to develop and assess methods for monitoring pollutant fate and transport and ecosystem recovery through the use of biological, chemical, and physical lines of evidence (LOEs) such as: 1) comprehensive sampling of and chemical analysis of contaminants in surface, suspended, and historic sediments; 2) extensive grab and multi-level real time water sampling and analysis of contaminants in the water column; 3) sampling, chemi

Strength characteristics of lightly solidified dredged marine clay admixed with bentonite

Science.gov (United States)

Ariffin, Syazwana Tajul; Chan, Chee-Ming

2017-11-01

Strength characteristic is a significant parameter in measuring the effect of soil improvement and effective composition of solidification. In this study, the dredged marine sediment (DMS) collected from Kuala Perlis (Malaysia) was examined to determine its strength characteristics under light cement solidification with bentonite. Dredged marine clay generally has the low shear strength and high void ratio, and consists mainly of soil particles of the fine-grained type. As a discarded geo-waste, it can be potentially treated to for reuse as a backfill material instead of being disposed of, hence reducing the negative impact on the environment. Physico-chemical parameters of the dredged sample were first determined, then solidification was carried out to improve the engineering properties by admixing ordinary Portland cement (OPC) as the binder and bentonite as a volume enhancer to the soil. The DMS was treated with the addition of 3 % and 6 % cement and bentonite within the range of 0-30 %. The specimens were cured at room temperature for 3, 7 and 14 days. The strength gain was measured by unconfined compression test and vane shear test. The laboratory test results were analyzed to establish the relationship between strength properties and solidification specifications. In summary, the strength of specimens increased with the increase of the quantity of bentonite and cement to get the effective composition of the specimen.

Life cycle assessment for dredged sediment placement strategies.

Science.gov (United States)

Bates, Matthew E; Fox-Lent, Cate; Seymour, Linda; Wender, Ben A; Linkov, Igor

2015-04-01

Dredging to maintain navigable waterways is important for supporting trade and economic sustainability. Dredged sediments are removed from the waterways and then must be managed in a way that meets regulatory standards and properly balances management costs and risks. Selection of a best management alternative often results in stakeholder conflict regarding tradeoffs between local environmental impacts associated with less expensive alternatives (e.g., open water placement), more expensive measures that require sediment disposal in constructed facilities far away (e.g., landfills), or beneficial uses that may be perceived as risky (e.g., beach nourishment or island creation). Current sediment-placement decisions often focus on local and immediate environmental effects from the sediment itself, ignoring a variety of distributed and long-term effects from transportation and placement activities. These extended effects have implications for climate change, resource consumption, and environmental and human health, which may be meaningful topics for many stakeholders not currently considered. Life-Cycle Assessment (LCA) provides a systematic and quantitative method for accounting for this wider range of impacts and benefits across all sediment management project stages and time horizons. This paper applies a cradle-to-use LCA to dredged-sediment placement through a comparative analysis of potential upland, open water, and containment-island placement alternatives in the Long Island Sound region of NY/CT. Results suggest that, in cases dealing with uncontaminated sediments, upland placement may be the most environmentally burdensome alternative, per ton-kilometer of placed material, due to the emissions associated with diesel fuel combustion and electricity production and consumption required for the extra handling and transportation. These results can be traded-off with the ecosystem impacts of the sediments themselves in a decision-making framework. Published by

Investigation of Comparative Mosquito Breeding in Dredged Material Disposal Sites Used in the Maintenance Dredging of the Atlantic Intra-Coastal Waterway in South Carolina.

Science.gov (United States)

1978-01-01

rctary ditching equipment falls inton thc latter category. Equipment of this type cuts a ditch with a Srt-ating cutting head . As the marsh sod is removed...several years if the site is not further altered by dredging. * 89 W W W V W W W W W W W SITE DESIGNATION: WACCAMAW NECK (G-1O) Summary 151. This...Bionomics and embryology of the inland floodwater mosquito . .. .’. Univ. of Illinois Press. 2 11pp. S Jeane, G. S., II, and R. E. Pine. 1975

Flow and suspended-sand behavior in large rivers after dredging.

Science.gov (United States)

Yuill, B. T.; Wang, Y.; Allison, M. A.; Meselhe, E. A.

2017-12-01

Dredging is commonly used in large rivers to promote navigation and provide sediment for engineering projects. Channel bars typically have thicker, coarser sediment deposits than elsewhere on the channel bed and are often the focus of dredging projects. Bar dredging may create deep pits ("borrow pits") that significantly alter flow and sediment transport. Locally, the pit acts as a large bedform, contracting and expanding the flow field and enhancing turbulence. At the reach scale, the pit acts as a new sediment sink and disrupts the sediment budget which may have consequences for channel stability and aquatic ecosystem health. In this study, we focus on the local impact of the borrow pit and how it, similar to dunes, creates a turbulent wake within the downstream flow column. We hypothesize that this wake may have implications for the overlapping suspended-sediment transport fields. Efficient dredging operations requires the ability to predict channel infilling/recovery timescales and in large, sandy rivers, a substantial fraction of the sediment infilling results from the settling of suspended sediment. However, if the turbulent wake significantly alters pathways of sediment settling within the borrow pit, typical models of sediment deposition that do not account for the wake effects may not apply. To explore this problem, we use numerical modelling to predict sand behavior with and without resolving the effects of wake turbulence. Wake turbulence is resolved using detached-eddy simulation and sand settling is simulated using Lagrangian particle tracking. Our study area is a >1 km2 channel bar in the lower Mississippi River, which was dredged in October 2016. We used vessel-based measurements (MBES, ADCP) to characterize the post-dredge hydrodynamic environment. Study results indicate that the turbulent wake significantly impacted suspended-sand behavior as it entered the borrow pit and large eddies increased the vertical grain velocities, mean grain settling was

Assessment of the Influence of Dredge Spoil Dumping on the Seafloor Geological Integrity

Directory of Open Access Journals (Sweden)

Joonas J. Virtasalo

2018-04-01

Full Text Available The European Marine Strategy Framework Directive requires the development of suitable indicators for regular reporting on the environmental state and achievement of a good environmental status of EU's marine waters by 2020. The development of indicators for determining seafloor integrity and its possible disturbance by human activities have so far largely ignored the geological properties of seafloor. This paper presents a study of Vuosaari and Uusikaupunki-D offshore dumping sites in Finland, the northern Baltic Sea. Full coverage multibeam bathymetry and relative backscatter data, and a number of sediment cores were collected over the sites. The areas covered by dumped dredge spoil stand out in the multibeam images because of their irregular surface and elevated backscatter. The short gravity cores were studied for lithology, and in 1-cm slices for 137Cs activity, organic content, and grain size distribution. The dumped material is represented in the cores by the gravelly mud lithofacies with massive texture and angular coarse particles. The dumped material is coarser, less sorted and has higher kurtosis compared to natural sediment due to the admixing of blasted rock during the dredging activities, and limited sorting during fall through the water column upon dumping. Dispersed dredge spoil, which was suspended in the water column during the dumping activities or reworked from the dumped material mounds and redistributed along the seafloor soon thereafter, was deposited over a wide area as a thin layer that is not necessarily readily identifiable by visual inspection in the cores. Cesium activity helped distinguish the dumped material from the 137Cs-enriched natural sediments deposited after the 1986 Chernobyl disaster. Considering that the dumped material at many of the coring sites in the Vuosaari dumping area is covered by natural sediment, it probably is largely stable. In contrast, dumped material at the shallower Uusikaupunki-D site has

ENVIRONMENTAL EFFECTS OF DREDGING AND DISPOSAL (E2-D2)

Science.gov (United States)

US Army Corps of Engineers public web site for the "Environmental Effects of Dredging and Disposal" ("E2-D2") searchable database of published reports and studies about environmental impacts associated with dredging and disposal operations. Many of the reports and studies are ava...

The WODA guidance paper on underwater sound from dredging (abstract)

NARCIS (Netherlands)

Thomsen, F.; Borsani, F.; Clarke, D.; Jong, C.A.F. de; Witt, P. de; Holtkamp, M.; Goethals, F.; San Martin, E.; Spadaro, P.; Raalte, G. van; Jensen, A.

2013-01-01

The World Organisation of Dredging Associations (WODA) has identified underwater sound as an environmental issue that needs further consideration. A WODA Expert Group on Underwater Sound (WEGUS) was established to provide a guidance paper on dredging sound, impact on aquatic biota and advice on

Selected Problems Of Noninvasive Ooze Dredging In The Protected Areas Of Port Docks

Directory of Open Access Journals (Sweden)

Abramowicz-Gerigk Teresa

2015-09-01

Full Text Available The paper presents the analysis of the ooze dredging concepts in the protected areas of harbour docks. The proposed method and system for ooze dredging are dedicated to all types of seabed protection, but the main concern are the geotextile mattresses, not resistant to mechanical damages. Due to the large seabed areas covered with this type of protection the effective method of noninvasive ooze dredging should be based on the use of a technical vessel for underwater works. The result of the analysis is the concept of the method and system for ooze dredging including in particular the mechanism for the automatic holding of the suction-dredge head in the proper distance from the seabed protection surface - the leading wheel truck and buoyancy-ballast system.

Evalution and cost comparison of anti-siltation systems and traditional dredging methods

OpenAIRE

Velasco, Victor V.

2000-01-01

CIVINS (Civilian Institutions) Thesis document Maintaining the design depth of ship servicing facilities is a challenging task. Dredging technology has improved significantly in the past few decades and this should have driven the cost downwards. However, increased environmental awareness has placed limitations on how dredge spoils are handled, transported and disposed of and has effectively increased the costs of dredging operations. The United States Army Corps of Engineers and the Naval...

Laboratory Feasibility Study Concerning the Use of the SediMeter (trademark) to Detect Fine-Scale ( or = 1 mm) Sedimentation Resulting from Dredging Operations

Science.gov (United States)

2013-07-01

Pages/Services.aspx). As a result of this dredging activity, bottom sediments are stirred up and resuspended into plumes. The transport of these...1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law , no...bed elevation changes as dredged material is pumped into an area such as a wetland. They could also be used to evaluate the geomorphic stability of

Effect of cutter type on sediment pollutants release in channel dredging

Science.gov (United States)

Yu, Y. R.; Chen, Y.; Dong, M. M.; Yang, B. L.

2016-08-01

Dredging activities are often used to maintain existing navigation channels. However’ traditional dredging equipment inevitably leads to sediment resuspension and nutrient loading in water. In this work’ the existing cutter used for dredging was transformed environmentally to reduce the release amount of sediment pollutants’ and to avoid the formation of secondary pollution to water bodies. Simulated tests with a general cutter’ a spiral cutter’ along with a general and spiral cutter equipped with the anti-diffusion device were conducted respectively in this study. The change of pollutants concentration in overlying water was examined. The environmental performance of each different structure cutter was comparatively analysed as well. The result revealed that in channel dredging with a spiral cutter’ the release amount of sediment pollutants was less than with a general cutter’ and that a general/spiral cutter equipped with the anti-diffusion device could effectively reduce the release amount of sediment contaminants’ particularly the release of the nitrogen nutrient during the 1h after the dredging treatment. The best transformation scheme for a cutter suction dredger (CSD) in its environmental-protection function may be: a spiral cutter equipped with the anti-diffusion device.

Dredging and disposal of fine sediments in the state of Rio de Janeiro, Brazil.

Science.gov (United States)

Barbosa, M C; de Souza Soares de Almeida, M

2001-07-30

Dredging is employed quite frequently in the state of Rio de Janeiro, especially for the installation and upkeep of commercial ports and rehabilitation of the hydraulic section of silted bodies of water. Until recently, all dredged material with no economic use was destined for marine disposal or stored at the edge of the water body. Since the 1990s, however, a new approach has been adopted for dredging as a result of pressure from the environmental organisations, encouraging closer interaction in Rio de Janeiro between the local and state public authorities and the universities on issues relating to licensing of this kind of activity. The recent experiments of the Civil and Ocean Engineering Programs of COPPE-UFRJ (Federal University of Rio de Janeiro) described herein are included in this context. The state of Rio de Janeiro has three bays, several coastal lagoon systems and a number of small and medium sized rivers in or close to urban areas, with a gentle slope as they near the sea. This is, then, a region highly susceptible to silting processes of water bodies, and therefore, to maintenance and/or environmental rehabilitation. As discussed in the article, fine and almost always organic sediments prevail, which is a considerable obstacle to the end disposal and possibility of reuse.

Predicting pollutant concentrations in the water column during dredging operations: Implications for sediment quality criteria

International Nuclear Information System (INIS)

Wasserman, Julio Cesar; Wasserman, Maria Angélica V.; Barrocas, Paulo Rubens G.; Almeida, Aline Mansur

2016-01-01

The development of new dredging techniques that can reduce, or at least predict, the environmental impacts, is in high demand by governments in developing countries. In the present work, a new methodology was developed, to evaluate the level of metals contamination (i.e. cadmium, lead and zinc) of the water column, during a dredging operation. This methodology was used to evaluate the impacts of the construction of a new maritime terminal in Sepetiba Bay, Brazil. The methodology quantifies the amount of resuspended sediments and calculates the expected contaminants concentrations in the water column. The results indicated that sediment quality criteria were not compatible with water quality criteria, because the dredging of contaminated sediments does not necessarily yield contaminated water. It is suggested that the use of sediment quality criteria for dredging operations might be abandoned, and the methodology presented in this study applied to assess dredging's environmental impacts, predicting water contamination levels. - Graphical abstract: A graphic model showing transference of contaminants from the sediments to the water column. The dark sediment area represents the dredged sediments and the arrows emerging from them represent the resuspended sediments affecting the water column. - Highlights: •Developing countries demand for new dredging projects. •A new model evaluates concentrations of metals in the water, caused by dredging. •The model shows that water and sediment quality criteria are not compatible. •Local hydrodynamics have a strong influence on the contamination of the water. •Management of dredging operations reduces environmental contamination.

Design improvements in box dredges to enhance the collection of manganese nodules

Digital Repository Service at National Institute of Oceanography (India)

Fernando, V.; Sonawane, A.V.

Design of three box dredges along with the technique and modifications effected to anable bulk sampling of manganese nodules is presented. Incorporation of a sled, angled cutting edges, retention plates and increased size of the dredge resulted...

Ecotoxicological assessment of sediments from the Port of Santos and the disposal sites of dredged material

Directory of Open Access Journals (Sweden)

Eduinetty Ceci P. M. Sousa

2007-06-01

Full Text Available The dredging of sediments from the Santos Channel is necessary to allow the navigation of ships operating in the Port of Santos. The disposal sites for such sediments are situated on the coastal zone, in front of the Santos Bay. The present paper aimed at evaluating the toxicity of sediments collected at the Santos Channel and at the former and current sediment disposal sites. Whole sediment tests with amphipods and elutriate assays with sea-urchin embryos were used. The samples from the Santos Channel were considered the most toxic: all the sediment samples from this area showed toxicity. Moreover, some samples from both former and new sediment disposal sites exhibited toxicity. Therefore, results showed that sediments from the studied areas present evidences of degradation; however, further studies are required to determine relationships between toxicity and contamination. Results also suggested that the disposal of dredged sediments should be re-evaluated.A dragagem dos sedimentos do Canal de Santos é necessária para permitir o trânsito de navios que operam no Porto de Santos. As áreas de disposição do material dragado estão situadas na zona costeira, em frente à Baía de Santos. Este estudo visou avaliar a qualidade dos sedimentos do Canal de Santos e das áreas de disposição atuais e antigas, utilizando testes de toxicidade de sedimento integral com anfípodos e de toxicidade de elutriatos com embriões de ouriço do mar. As amostras do Canal de Santos foram consideradas as mais tóxicas: todas as amostras dessa área foram consideradas significativamente tóxicas. Além disso, algumas amostras das áreas de disposição exibiram toxicidade. Os resultados mostraram, portanto, que os sedimentos apresentam evidências de degradação em sua qualidade, porém novos estudos devem ser conduzidos visando determinar as relações entre contaminação e toxicidade. Os resultados sugerem ainda que a disposição dos sedimentos dragados

Application of the Streamflow Prediction Tool to Estimate Sediment Dredging Volumes in Texas Coastal Waterways

Science.gov (United States)

Yeates, E.; Dreaper, G.; Afshari, S.; Tavakoly, A. A.

2017-12-01

Over the past six fiscal years, the United States Army Corps of Engineers (USACE) has contracted an average of about a billion dollars per year for navigation channel dredging. To execute these funds effectively, USACE Districts must determine which navigation channels need to be dredged in a given year. Improving this prioritization process results in more efficient waterway maintenance. This study uses the Streamflow Prediction Tool, a runoff routing model based on global weather forecast ensembles, to estimate dredged volumes. This study establishes regional linear relationships between cumulative flow and dredged volumes over a long-term simulation covering 30 years (1985-2015), using drainage area and shoaling parameters. The study framework integrates the National Hydrography Dataset (NHDPlus Dataset) with parameters from the Corps Shoaling Analysis Tool (CSAT) and dredging record data from USACE District records. Results in the test cases of the Houston Ship Channel and the Sabine and Port Arthur Harbor waterways in Texas indicate positive correlation between the simulated streamflows and actual dredging records.

Fishery Resource Utilization of a Restored Estuarine Borrow Pit: A Beneficial Use of Dredged Material Case Study

Science.gov (United States)

2012-08-01

differed from those in both May and November, but May and November did not differ. May trawl samples were characterized by anchovies and bluefish ... bluefish (Pomatomus saltatrix), weakfish (Cynoscion regalis), Atlantic menhaden (Brevoortia tyrannus), and spot (Leiostomas xanthurus). Winter spawning...August 2012 17 only fish species captured by gill net in both dredged holes. Other species comprising the gill net catch included bluefish

Ripening of clayey dredged sediments during temporary upland disposal, A Bioremediation technique.

NARCIS (Netherlands)

Vermeulen, J.; Grotenhuis, J.T.C.; Joziasse, J.; Rulkens, W.H.

2003-01-01

Background and Goal. In the Netherlands about 40 million m3 of sediment has to be dredged annually for both maintenance and environmental reasons. Temporary upland disposal is the most widely adopted alternative for dredged sediments worldwide. For good management of temporary disposal sites,

Flotation as a remediation technique for heavily polluted dredged material. 2. Characterisation of flotated fractions.

Science.gov (United States)

Cauwenberg, P; Verdonckt, F; Maes, A

1998-01-19

The particle size distribution and the metal speciation of the heavy metals were investigated on dredged sediment and on the fractions obtained by mechanical agitated (Denver) flotation. The transition metal ions (cadmium, copper, lead and zinc) were flotated specifically independent of the particle size. Particle size analysis, EDTA extraction and sequential extracts indicated that during flotation a redistribution of metals occurred due to the oxidation of metal sulphides. This oxidation process was more pronounced when the flotation was performed at higher pH values and resulted in a decrease in flotation specificity.

Phytoplankton community indicators of changes associated with dredging in the Tagus estuary (Portugal)

International Nuclear Information System (INIS)

Cabrita, Maria Teresa

2014-01-01

This work reports changes in suspended particulate matter, turbidity, dissolved Cr, Ni, Cu, Cd, Hg and Pb concentrations, and phytoplankton biomass and composition during a 5-month period dredging operation, in a trace element contaminated area of the Tagus estuary (Portugal). Phytoplankton biomass, diatom:other groups ratio, benthic:pelagic diatom ratio, Margalef's, Simpson's diversity, Shannon–Wiever's, and Warwick and Clarke's taxonomic diversity and distinctness indices, and individual taxa were investigated as indicators of dredging induced changes. Significant rise in sediment resuspension and trace element mobilisation caused by dredging influenced the community structure but not the overall biomass. Benthic diatom displacement into the water column maintained species diversity, and therefore, none of the indices highlighted community changes. Contrastingly, diatom:other groups ratio and benthic:pelagic diatom ratio were reliable indicators for the assessment of dredging induced changes. A shift in composition towards species less susceptible to trace elements was observed, disclosing some individual taxa as potential indicators. - Highlights: • Phytoplankton community indicators of dredging induced changes were investigated. • Increased resuspension and trace element mobilisation changed community structure. • Diversity indices unsuitable to detect changes because species richness was maintained. • Diatom:other groups and benthic:pelagic diatom ratios were efficient indicators. • Individual taxa may be potential indicators but require site-specific validation. - Diatom:other groups ratio, benthic:pelagic diatom ratio and individual taxa were identified as efficient indicators for the assessment of water quality changes associated with dredging

Detecting sedimentation impacts to coral reefs resulting from dredging the Port of Miami, Florida USA.

Science.gov (United States)

Miller, Margaret W; Karazsia, Jocelyn; Groves, Carolyn E; Griffin, Sean; Moore, Tom; Wilber, Pace; Gregg, Kurtis

2016-01-01

The federal channel at Port of Miami, Florida, USA, was dredged between late 2013 and early 2015 to widen and deepen the channel. Due to the limited spatial extent of impact-assessment monitoring associated with the project, the extent of the dredging impacts on surrounding coral reefs has not been well quantified. Previously published remote sensing analyses, as well as agency and anecdotal reports suggest the most severe and largest area of sedimentation occurred on a coral reef feature referred to as the Inner Reef, particularly in the sector north of the channel. A confounding regional warm-water mass bleaching event followed by a coral disease outbreak during this same time frame made the assessment of dredging-related impacts to coral reefs adjacent to the federal channel difficult but still feasible. The current study sought to better understand the sedimentation impacts that occurred in the coral reef environment surrounding Port of Miami, to distinguish those impacts from other regional events or disturbances, and provide supplemental information on impact assessment that will inform discussions on compensatory mitigation requirements. To this end, in-water field assessments conducted after the completion of dredging and a time series analysis of tagged corals photographed pre-, during, and post-dredging, are used to discern dredging-related sedimentation impacts for the Inner Reef north. Results indicate increased sediment accumulation, severe in certain times and places, and an associated biological response (e.g., higher prevalence of partial mortality of corals) extended up to 700 m from the channel, whereas project-associated monitoring was limited to 50 m from the channel. These results can contribute to more realistic prediction of areas of indirect effect from dredging projects needed to accurately evaluate proposed projects and design appropriate compliance monitoring. Dredging projects near valuable and sensitive habitats subject to local and

Detecting sedimentation impacts to coral reefs resulting from dredging the Port of Miami, Florida USA

Directory of Open Access Journals (Sweden)

Margaret W. Miller

2016-11-01

Full Text Available The federal channel at Port of Miami, Florida, USA, was dredged between late 2013 and early 2015 to widen and deepen the channel. Due to the limited spatial extent of impact-assessment monitoring associated with the project, the extent of the dredging impacts on surrounding coral reefs has not been well quantified. Previously published remote sensing analyses, as well as agency and anecdotal reports suggest the most severe and largest area of sedimentation occurred on a coral reef feature referred to as the Inner Reef, particularly in the sector north of the channel. A confounding regional warm-water mass bleaching event followed by a coral disease outbreak during this same time frame made the assessment of dredging-related impacts to coral reefs adjacent to the federal channel difficult but still feasible. The current study sought to better understand the sedimentation impacts that occurred in the coral reef environment surrounding Port of Miami, to distinguish those impacts from other regional events or disturbances, and provide supplemental information on impact assessment that will inform discussions on compensatory mitigation requirements. To this end, in-water field assessments conducted after the completion of dredging and a time series analysis of tagged corals photographed pre-, during, and post-dredging, are used to discern dredging-related sedimentation impacts for the Inner Reef north. Results indicate increased sediment accumulation, severe in certain times and places, and an associated biological response (e.g., higher prevalence of partial mortality of corals extended up to 700 m from the channel, whereas project-associated monitoring was limited to 50 m from the channel. These results can contribute to more realistic prediction of areas of indirect effect from dredging projects needed to accurately evaluate proposed projects and design appropriate compliance monitoring. Dredging projects near valuable and sensitive habitats

Structural and functional biological assessment of aggregate dredging intensity on the Belgian part of the North Sea

OpenAIRE

De Backer, A.; Hillewaert, H.; Van Hoey, G.; Wittoeck, J.; Hostens, K.

2014-01-01

Marine aggregate dredging in the Belgian part of the North Sea (BPNS) is restricted to four dedicated concession zones. Within these zones, there are areas under different dredging pressure, but with the advantage that these are situated within a similar habitat (cfr. similar sediment characteristics) . As such, this study assessed how different degrees of dredging pressure executed on a similar sandy habitat affect the benthic ecosystem. Possible responses of the macrobenthos on the dredging...

Prediction of water quality variation caused by dredging urban river-bed

Energy Technology Data Exchange (ETDEWEB)

Cho, Hong-Je; Lee, Byung-Ho; Kim, Jung-Sik [University of Ulsan, Ulsan(Korea); Lee, Kun-Bae [Metropolitan City Hall of Ulsan, Ulsan(Korea)

2002-04-30

The purpose of this study was to examine the effect of water quality improvement due to dredging the bottom deposit at the downstream of a urban river. The finite difference method was used to analyze the water quality variations caused by the depths of dredging and intercepting ratios of the goal years. 21 boring points were selected along the 11.2 Km river reach running through a metropolitan city. The pollution levels of the deposits from the bored points were examined by the leaching test. The improvement effect of the water quality, measured as changes of COD, were carried at under drought, minimal, and normal flow. The result indicates that the dredging of the contaminated sludge contributes the improvement of the water quality. (author). 10 refs., 8 tabs., 7 figs.

Comparisons of benthic filter feeder communities before and after a large-scale capital dredging program.

Science.gov (United States)

Abdul Wahab, Muhammad Azmi; Fromont, Jane; Gomez, Oliver; Fisher, Rebecca; Jones, Ross

2017-09-15

Changes in turbidity, sedimentation and light over a two year large scale capital dredging program at Onslow, northwestern Australia, were quantified to assess their effects on filter feeder communities, in particular sponges. Community functional morphological composition was quantified using towed video surveys, while dive surveys allowed for assessments of species composition and chlorophyll content. Onslow is relatively diverse recording 150 sponge species. The area was naturally turbid (1.1 mean P 80 NTU), with inshore sites recording 6.5× higher turbidity than offshore localities, likely influenced by the Ashburton River discharge. Turbidity and sedimentation increased by up to 146% and 240% through dredging respectively, with corresponding decreases in light levels. The effects of dredging was variable, and despite existing caveats (i.e. bleaching event and passing of a cyclone), the persistence of sponges and the absence of a pronounced response post-dredging suggest environmental filtering or passive adaptation acquired pre-dredging may have benefited these communities. Copyright © 2017. Published by Elsevier Ltd.

A temporal and spatial assessment of TBT concentrations at dredged material disposal sites around the coast of England and Wales.

Science.gov (United States)

Bolam, Thi; Barry, Jon; Law, Robin J; James, David; Thomas, Boby; Bolam, Stefan G

2014-02-15

Despite legislative interventions since the 1980s, contemporary concentrations of organotin compounds in marine sediments still impose restrictions on the disposal of dredged material in the UK. Here, we analyse temporal and spatial data to assess the effectiveness of the ban on the use of TBT paints in reducing concentrations at disposal sites. At a national scale, there was a statistically significant increase in the proportion of samples in which the concentration was below the limit of detection (LOD) from 1998 to 2010. This was observed for sediments both inside and outside the disposal sites. However, this temporal decline in organotin concentration is disposal site-specific. Of the four sites studied in detail, two displayed significant increases in proportion of samples below LOD over time. We argue that site-specificity in the effectiveness of the TBT ban results from variations in historical practices at source and unique environmental characteristics of each site. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Changes in water quality at Cochin harbour dredging site, south west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Joseph, T.; Balachandran, K.K.; Nair, M.; Venugopal, P.; Sankaranarayanan, V.N.

The water quality in the vicinity of the dredging did not show any appreciable change. All dissolved nutrients recorded sharp changes in the water column. After 20 minutes and 2 hours, the conditions at the dredging were much different from the pre...

Technical guidelines for environmental dredging of contaminated sediments

Science.gov (United States)

2008-09-01

This report provides technical guidelines for evaluating : environmental dredging as a sediment remedy component. This document : supports the Contaminated Sediment Remediation Guidance for : Hazardous Waste Sites, released by the U.S. Environmental ...

Ecotoxicological risk assessment linked to infilling quarries with treated dredged seaport sediments

Energy Technology Data Exchange (ETDEWEB)

Perrodin, Yves, E-mail: perrodin@entpe.fr [Universite de Lyon, ENTPE, CNRS, UMR 5023 LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); Donguy, Gilles [Universite de Lyon, ENTPE, CNRS, UMR 5023 LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); Bazin, Christine [INSAVALOR, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex (France); Volatier, Laurence; Durrieu, Claude [Universite de Lyon, ENTPE, CNRS, UMR 5023 LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); Bony, Sylvie; Devaux, Alain [Universite de Lyon, ENTPE, CNRS, UMR 5023 LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); INRA, USC IGH, UMR LEHNA, 2, rue Maurice Audin, 69518 Vaulx-en-Velin (France); Abdelghafour, Mohammed; Moretto, Robert [INSAVALOR, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex (France)

2012-08-01

The dredged sediments of polluted seaports now raise complex management problems since it is no longer possible to discharge them into the sea. This results in the need to manage them on land, raising other types of technical, economic and environmental problems. Regarding the technical and economic dimensions, traditional waste treatment methods have proved to be poorly adapted, due to very high costs and low absorbable volumes. In this context, filling quarries in coastal areas with treated sediments could represent an interesting alternative for these materials. Nevertheless, for the environmental dimension, it is necessary to demonstrate that this possibility is harmless to inland ecosystems. Consequently, a specific ecotoxicological risk assessment methodology has been formulated and tested on three sediments taken from seaboards of France, in view to providing an operational and usable tool for the prior validation of any operation to fill quarries with treated seaport sediments. This method incorporates the formulation of a global conceptual model of the scenario studied and the definition of protocols for each of its steps: the characterisation of exposures (based on a simulation of sediment deposit), the characterisation of effects (via the study of sediments ecotoxicity), and the final ecotoxicological risk assessment performed as a calculation of a risk quotient. It includes the implementation in parallel of two types of complementary approach: the 'substances' approach derived from the European methodology for assessing new substances placed on the market, and the 'matrix' approach which is similar to methods developed in France to assess ecological risks in other domains (waste management, polluted site management, Horizontal-Ellipsis ). The application of this dual approach to the three sediments tested led to conclude with reliability that the project to deposit sediments '1' and '2' presented a low risk for

Ecotoxicological risk assessment linked to infilling quarries with treated dredged seaport sediments

International Nuclear Information System (INIS)

Perrodin, Yves; Donguy, Gilles; Bazin, Christine; Volatier, Laurence; Durrieu, Claude; Bony, Sylvie; Devaux, Alain; Abdelghafour, Mohammed; Moretto, Robert

2012-01-01

The dredged sediments of polluted seaports now raise complex management problems since it is no longer possible to discharge them into the sea. This results in the need to manage them on land, raising other types of technical, economic and environmental problems. Regarding the technical and economic dimensions, traditional waste treatment methods have proved to be poorly adapted, due to very high costs and low absorbable volumes. In this context, filling quarries in coastal areas with treated sediments could represent an interesting alternative for these materials. Nevertheless, for the environmental dimension, it is necessary to demonstrate that this possibility is harmless to inland ecosystems. Consequently, a specific ecotoxicological risk assessment methodology has been formulated and tested on three sediments taken from seaboards of France, in view to providing an operational and usable tool for the prior validation of any operation to fill quarries with treated seaport sediments. This method incorporates the formulation of a global conceptual model of the scenario studied and the definition of protocols for each of its steps: the characterisation of exposures (based on a simulation of sediment deposit), the characterisation of effects (via the study of sediments ecotoxicity), and the final ecotoxicological risk assessment performed as a calculation of a risk quotient. It includes the implementation in parallel of two types of complementary approach: the “substances” approach derived from the European methodology for assessing new substances placed on the market, and the “matrix” approach which is similar to methods developed in France to assess ecological risks in other domains (waste management, polluted site management, …). The application of this dual approach to the three sediments tested led to conclude with reliability that the project to deposit sediments “1” and “2” presented a low risk for the peripheral aquatic ecosystems while

Evaluation of the boundary condition influence on PAH concentrations in the water column during the sediment dredging of a port.

Science.gov (United States)

Cutroneo, L; Castellano, M; Carbone, C; Consani, S; Gaino, F; Tucci, S; Magrì, S; Povero, P; Bertolotto, R M; Canepa, G; Capello, M

2015-12-30

The mobilisation of sediments and related contaminants connected to dredging activities is one of the most critical issues to the environmental risk and exposure assessment of a dredging project. The aim of this paper was an investigation of the mobilisation of polycyclic aromatic hydrocarbons (PAHs) due to the dredging of the Port of Genoa (Italy) to identify the temporal and spatial extent of the contaminant transport, and the influence of the dredging and the boundary conditions on it. The results showed relatively low background PAH concentrations in the water column and confirmed the dredging as the primary rising factor of concentrations in the water column, but also showed a complex scenario in which the different environmental and dredging factors forced the concentrations at different levels and moments. The post dredging phase showed PAH values close to the background conditions and the concentrations remained relatively high only for a few PAHs.

Effects of Dredging and Lanthanum-Modified Clay on Water Quality Variables in an Enclosure Study in a Hypertrophic Pond

Directory of Open Access Journals (Sweden)

Miquel Lürling Guido Waajen

2017-05-01

Full Text Available An enclosure experiment was conducted between July and September 2009 to compare the effectiveness of a phosphate fixative, the lanthanum-modified bentonite clay Phoslock® (LMB, dredging, and their combination in controlling eutrophication in a hypertrophic urban pond in Heesch, The Netherlands. In total, 25 water quality variables were monitored. Multivariate analysis revealed that the combination LMB-treated and dredged enclosures deviated most from the pond (reference and the controls, and showed the strongest eutrophication reduction. Overall, dredging significantly increased transparency, lowered turbidity, and improved the oxygen conditions in the enclosures compared to non-dredged ones. Nonetheless, one dredged enclosure deviated dramatically from the others, which might reflect methodological issues with dredging. The LMB treatment appeared to be less effective at mitigating eutrophication than dredging, and phosphate concentrations even increased during the experiment in the LMB-treated enclosures. Chemical equilibrium modeling suggested that humic substances could have formed complexes with lanthanum (La from the LMB, rendering it unavailable for intercepting P over the course of the enclosure experiment. Residual lanthanum concentrations in combination dredging and LMB treatments exceeded the Dutch standard 10-fold. Total zooplankton abundance, and particularly Cladocera, increased in all enclosures over the course of the experiment. The limited effect of LMB in the enclosure experiment and the violation of the Dutch La standard when combined with dredging disqualify LMB as an intervention agent in the restoration of the pond.

Effects of combined dredging-related stressors on sponges: a laboratory approach using realistic scenarios.

Science.gov (United States)

Pineda, Mari-Carmen; Strehlow, Brian; Kamp, Jasmine; Duckworth, Alan; Jones, Ross; Webster, Nicole S

2017-07-12

Dredging can cause increased suspended sediment concentrations (SSCs), light attenuation and sedimentation in marine communities. In order to determine the combined effects of dredging-related pressures on adult sponges, three species spanning different nutritional modes and morphologies were exposed to 5 treatment levels representing realistic dredging scenarios. Most sponges survived under low to moderate turbidity scenarios (SSCs of ≤ 33 mg L -1 , and a daily light integral of ≥0.5 mol photons m -2 d -1 ) for up to 28 d. However, under the highest turbidity scenario (76 mg L -1 , 0.1 mol photons m -2 d -1 ) there was 20% and 90% mortality of the phototrophic sponges Cliona orientalis and Carteriospongia foliascens respectively, and tissue regression in the heterotrophic Ianthella basta. All three sponge species exhibited mechanisms to effectively tolerate dredging-related pressures in the short term (e.g. oscula closure, mucus production and tissue regression), although reduced lipids and deterioration of sponge health suggest that longer term exposure to similar conditions is likely to result in higher mortality. These results suggest that the combination of high SSCs and low light availability can accelerate mortality, increasing the probability of biological effects, although there is considerable interspecies variability in how adult sponges respond to dredging pressures.

Effects of suction-dredging for cockles on non-target fauna in the Wadden Sea

NARCIS (Netherlands)

Hiddink, JG

2003-01-01

Suction dredging for cockles removes large cockles from tidal flats and may also cause mortality of non-target fauna and make the habitat less suitable for some species. This study examines whether suction dredging for cockles on tidal flats of the Dutch Wadden Sea had affected densities of

SURVIVAL ESTIMATES OF BYCATCH INDIVIDUALS DISCARDED FROM BIVALVE DREDGES

Directory of Open Access Journals (Sweden)

Francisco Leitão

2014-12-01

Full Text Available The fate of released bycatch is an issue of great interest for fisheries research and management. Survival experiments were carried out to assess the survival capacity of animals damaged and discarded during clam dredging operations. Three common bycatch species, two fish (Trachinus vipera; Dicologlossa cuneata and one crab (Polybius henslowii, were collected during the sorting of catches from a commercial dredging boat. An arbitrary score scale was used to quantify the type and extent of damage to the organisms. Onboard, damaged individuals were placed in tanks containing seawater which were subsequently transferred to the laboratory. Survival experiments were conducted during the subsequent 48h. D. cuneata exhibited the lowest mortality after 48h (54%, followed by P. henslowii (65% and T. vipera (81%. Despite the magnitude of the percentage mortalities determined, the average number of individuals estimated to die during a 15 minutes tow (standard commercial fishing time was relatively small: 1.2, 3.24 and 11 for D. cuneata, T. vipera and P. henslowii, respectively. Nevertheless, when these figures are extrapolated to cover all the dredging fleet the impact of this practice on the populations of the species studied can be significant, particulary for D. cuneata.

Monitoring of East Channel dredge areas benthic fish population and its implications

International Nuclear Information System (INIS)

Drabble, Ray

2012-01-01

Regional annual sampling of commercial fish stocks formed a high priority for monitoring studies attendant with the granting of aggregate dredging licenses in the Eastern Channel Region (ECR) which had previously not been dredged. An assessment of 4 m beam trawl sampling between 2005 and 2008 following the granting of licences in 2006 is provided. The majority of fish species have shown marked reductions in abundance since commencement of dredging. Draghead entrainment has been identified as a possible contributory cause based upon the known vulnerability of selected species (). Other environmental factors considered offer no explanation for the changes in abundance. Comparative analyses with ICES data for plaice and sole over the study period demonstrate that changes in the ECR do not result from seasonal flux in the wider populations. An alternative impact model and potential mitigation measures are suggested.

Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 A of -42-foot project)

International Nuclear Information System (INIS)

Ward, J.A.; Word, J.Q.; Pinza, M.R.; Mayhew, H.L.; Barrows, E.S.; Lefkovitz, L.F.

1992-09-01

The Battelle/Marine Sciences Laboratory (MSL) conducted a study to determine whether dredged sediments from Oakland Inner and Outer Harbors were suitable for ocean disposal. Nineteen test treatments, six reference treatments, and three control treatments were tested for physical/chemical parameters, water column effects, dredged- sediment toxicity, and bioaccumulation potential. Physical/chemical parameters were analyzed at each site and each composite sediment to a depth of -44 ft MLLW. These parameters included analysis for geological characteristics, conventional sediment measurements (grain size, total volatile solids, total organic carbon, oil and grease, and total petroleum hydrocarbons), metals,, polynuclear aromatic hydrocarbons (PAHs), pesticides, butyltins, and polychlorinated biphenyls (PCBs). Physical/chemical data were used in support of the toxicological and bioaccumulation testing, but were not used in the decision-making criteria described in the Draft Implementation manual under Tier III testing. To evaluate water column effects, MSL conducted suspended-particulate-phase (SPP) test using the mysid shrimp Holmesimysis sculpta, speckled sanddab citharichtys stigmaeus, and larvae of the pacific oyster Crassostrea gigas. Both a 48-h and a 96-h test were performed. The MSL evaluated dredged-sediment toxicity by conducting a total of eight solid-phase toxicity tests using the following organisms: the bivalve clam Macoma nasuta, the polychaete worm Nepthys caecoides, the speckled sanddab C. stigmaeus, and the amphipod Rhepoxynius abronius. Test duration ranged from 10 to 28 days. Bioaccumulation potential was evaluated in the 28-day M. Nasuta and N. caecoides solid-phase exposures by measuring the contaminants of concern present in their tissues after exposure to test, reference, and control sediments. This report contains the data and test results

Ecological evaluation of proposed discharge of dredged material from Oakland Harbor into ocean waters (Phase 3 A of -42-foot project)

Energy Technology Data Exchange (ETDEWEB)

Ward, J A; Word, J Q; Pinza, M R; Mayhew, H L; Barrows, E S; Lefkovitz, L F [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1992-09-01

The Battelle/Marine Sciences Laboratory (MSL) conducted a study to determine whether dredged sediments from Oakland Inner and Outer Harbors were suitable for ocean disposal. Nineteen test treatments, six reference treatments, and three control treatments were tested for physical/chemical parameters, water column effects, dredged- sediment toxicity, and bioaccumulation potential. Physical/chemical parameters were analyzed at each site and each composite sediment to a depth of -44 ft MLLW. These parameters included analysis for geological characteristics, conventional sediment measurements (grain size, total volatile solids, total organic carbon, oil and grease, and total petroleum hydrocarbons), metals,, polynuclear aromatic hydrocarbons (PAHs), pesticides, butyltins, and polychlorinated biphenyls (PCBs). Physical/chemical data were used in support of the toxicological and bioaccumulation testing, but were not used in the decision-making criteria described in the Draft Implementation manual under Tier III testing. To evaluate water column effects, MSL conducted suspended-particulate-phase (SPP) test using the mysid shrimp Holmesimysis sculpta, speckled sanddab citharichtys stigmaeus, and larvae of the pacific oyster Crassostrea gigas. Both a 48-h and a 96-h test were performed. The MSL evaluated dredged-sediment toxicity by conducting a total of eight solid-phase toxicity tests using the following organisms: the bivalve clam Macoma nasuta, the polychaete worm Nepthys caecoides, the speckled sanddab C. stigmaeus, and the amphipod Rhepoxynius abronius. Test duration ranged from 10 to 28 days. Bioaccumulation potential was evaluated in the 28-day M. Nasuta and N. caecoides solid-phase exposures by measuring the contaminants of concern present in their tissues after exposure to test, reference, and control sediments. This report contains the data and test results.

Effects of light attenuation on the sponge holobiont-implications for dredging management

DEFF Research Database (Denmark)

Pineda, Mari Carmen; Strehlow, Brian; Duckworth, Alan

2016-01-01

Dredging and natural sediment resuspension events can cause high levels of turbidity, reducing the amount of light available for photosynthetic benthic biota. To determine how marine sponges respond to light attenuation, five species were experimentally exposed to a range of light treatments......, indicating that light attenuation poses a risk to photosynthetic marine sponges. Examining benthic light levels over temporal scales would enable dredging proponents to be aware of conditions that could impact on sponge physiology....

Environmental Risk Assessment of dredging processes – application to Marin harbour (NW Spain)

OpenAIRE

A. G. Gómez; J. García Alba; A. Puente; J. A. Juanes

2014-01-01

ABSTRACT. A methodological procedure to estimate the environmental risk of dredging operations in aquatic systems has been developed. Environmental risk estimations are based on numerical models results, which provide an appropriated spatio-temporal framework analysis to guarantee an effective decision-making process. The methodological procedure has been applied on a real dredging operation in the port of Marin (NW Spain). Results from Marin harbour confirmed the suitabi...

40 CFR 227.13 - Dredged materials.

Science.gov (United States)

2010-07-01

... by the U.S. Army Corps of Engineers using the criteria of applicable sections of parts 227 and 228... material with particle sizes larger than silt, and the material is found in areas of high current or wave energy such as streams with large bed loads or coastal areas with shifting bars and channels; or (2...

Faunal and vegetation monitoring in response to harbor dredging in the Port of Miami

Science.gov (United States)

Daniels, Andre; Stevenson, Rachael; Smith, Erin; Robblee, Michael

2018-04-11

Seagrasses are highly productive ecosystems. A before-after-control-impact (BACI) design was used to examine effects of dredging on seagrasses and the animals that inhabit them. The control site North Biscayne Bay and the affected site Port of Miami had seagrass densities decrease during both the before, Fish and Invertebrate Assessment Network 2006-2011, and after, Faunal Monitoring in Response to Harbor Dredging 2014-2016, studies. Turbidity levels increased at North Biscayne Bay and Port of Miami basins during the Faunal Monitoring in Response to Harbor Dredging study, especially in 2016. Animal populations decreased significantly in North Biscayne Bay and Port of Miami in the Faunal Monitoring in Response to Harbor Dredging study compared to the Fish and Invertebrate Assessment Network study. Predictive modeling shows that numbers of animal populations will likely continue to decrease if the negative trends in seagrass densities continue unabated. There could be effects on several fisheries vital to the south Florida economy. Additional research could determine if animal populations and seagrass densities have rebounded or continued to decrease.

Evolution of mud-capped dredge pits following excavation: sediment trapping and slope instability

Science.gov (United States)

Obelcz, J.; Xu, K.; Bentley, S. J.; Li, C.; Miner, M. D.; O'Connor, M. C.; Wang, J.

2016-02-01

Many fluvial channels incised the Northern Gulf of Mexico inner continental shelf during the late Quaternary. Mud-capped dredge pits (MCDPs), which are generally elongate and deep (8-10 m) excavations, target sandy fluvial channel deposits for coastal restoration projects. The morphological evolution of dredge excavations in noncohesive sandy substrate is well studied, but MCDPs have up to a several-meter-thick veneer of Holocene shelf mud overlying sandy channel deposits. This stratigraphy is hypothesized to result in more complex post-dredge morphology than pit walls simply slumping to the angle of repose shortly after excavation. Numerical modeling of MCDP post-dredge response conducted prior to excavation indicates pit walls may retrogressively fail, which is accounted for in pit design by assigning no-dredge setback buffers from pipelines or cultural and environmental resources. To validate model results and test effectiveness of setback buffers, a geophysical survey of the Sandy Point MCDP (20 km west of the Mississippi River Delta in 10m deep water), where 1.7 million m3 of sandy sediment was excavated in 2012, was conducted May 2015. A total of 84 line-km of high-resolution chirp subbottom and a 27 km2 grid of swath bathymetry and sidescan sonar were collected. The data indicate the dredge pit walls are differentially slumping, with the western pit wall in a more active state of failure than the eastern wall. The western failures morphologically resemble features observed along the muddy Mississippi River Delta Front at water depths of 20-100 m, including bowl-shaped collapse failures and retrogressive stair-stepped slumps; these failures may play a key role in evaluating the distance of setback buffer zone to pipelines. These features indicate the cohesive mud overlying the sandy infill has a prominent role in pit wall stability. A 0.5-1 m thick acoustically transparent package overlies the entire pit floor (interpreted as a possible fluid mud layer

Phytoremediation of metals contaminated dredged sediments: Use of synthetic chelates in metals phytoextraction

Science.gov (United States)

Sahut, C.; Geniaut, G.; Lillo, M. P.

2003-05-01

(in Times 10 points) The waterways maintenance leads to a large volume of dredged polluted sediments, to be disposed of, every year. As the economic disposal of dredged sediment is a single line along the stream they can behave as a sink of pollutant and a migration in the environment is observed. Chelate-enhanced phytoremediation has been proposed as an effective tool for the extraction of heavy metals from dredged sediment by plants. Lysimeters studies were conducted to study the phytoremediation of sediments with EDTA and lactic acid used as synthetic chelators. EDTA appeared to enhance metal solubility by plant uptake did not increase accordingly. Futhermore EDTA enhance metal leaching which could lead 10 groungwater pollution. To prevent these unwanted side-effects, careful management of phytoremediation and of the use of EDTA seems necessary.

Dredging effects on selected nutrient concentrations and ecoenzymatic activity in two drainage ditch sediments in the lower Mississippi River Valley

Directory of Open Access Journals (Sweden)

Matt Moore

2017-09-01

Full Text Available Agricultural drainage ditches are conduits between production acreage and receiving aquatic systems. Often overlooked for their mitigation capabilities, agricultural drainage ditches provide an important role for nutrient transformation via microbial metabolism. Variations in ecoenzyme activities have been used to elucidate microbial metabolism and resource demand of microbial communities to better understand the relationship between altered nutrient ratios and microbial activity in aquatic ecosystems. Two agricultural drainage ditches, one in the northeast portion of the Arkansas Delta and the other in the lower Mississippi Delta, were monitored for a year. Sediment samples were collected prior to each ditch being dredged (cleaned, and subsequent post-dredging samples occurred as soon as access was available. Seasonal samples were then collected throughout a year to examine effects of dredging on selected nutrient concentrations and ecoenzymatic activity recovery in drainage ditch sediments. Phosphorus concentrations in sediments after dredging decreased 33–66%, depending on ditch and phosphorus extraction methodology. Additionally, ecoenzymatic activity was significantly decreased in most sediment samples after dredging. Fluorescein diacetate hydrolysis activity, an estimate of total microbial activity, decreased 56–67% after dredging in one of the two ditches. Many sample sites also had significant phosphorus and ecoenzymatic activity differences between the post-dredge samples and the year-long follow-up samples. Results indicate microbial metabolism in dredged drainage ditches may take up to a year or more to recover to pre-dredged levels. Likewise, while sediment nutrient concentrations may be decreased through dredging and removal, runoff and erosion events over time tend to quickly replenish nutrient concentrations in replaced sediments. Understanding nutrient dynamics and microbial metabolism within agricultural drainage ditches is

10 CFR 51.97 - Final environmental impact statement-materials license.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-Materials Licenses § 51.97 Final environmental impact statement—materials license. (a) Independent spent fuel storage installation (ISFSI...

Measurement of changes in marine benthic ecosystem function following physical disturbance by dredging

OpenAIRE

Wan Hussin, Wan Mohd Rauhan

2012-01-01

Measuring the impact of physical disturbance on macrofaunal communities and sediment composition is important given the increased demand for the exploitation and disturbance of marine ecosystems. The aim of the present investigation was to provide a comprehensive study about the extent to which the disturbance (especially aggregate dredging) may affect benthic ecosystem function. The first part of the thesis concerns a field investigation of the impacts of dredging on the be...

Environmental Risk Assessment of dredging processes - application to Marin harbour (NW Spain)

Science.gov (United States)

Gómez, A. G.; García Alba, J.; Puente, A.; Juanes, J. A.

2014-04-01

A methodological procedure to estimate the environmental risk of dredging operations in aquatic systems has been developed. Environmental risk estimations are based on numerical models results, which provide an appropriated spatio-temporal framework analysis to guarantee an effective decision-making process. The methodological procedure has been applied on a real dredging operation in the port of Marin (NW Spain). Results from Marin harbour confirmed the suitability of the developed methodology and the conceptual approaches as a comprehensive and practical management tool.

Processes of physical change to the seabed and bivalve recruitment over a 10-year period following experimental hydraulic clam dredging on Banquereau, Scotian Shelf

Science.gov (United States)

Gilkinson, K.; King, E. L.; Li, M. Z.; Roddick, D.; Kenchington, E.; Han, G.

2015-01-01

A previous study on the effects of experimental hydraulic clam dredging on seabed habitat and commercial bivalve populations revealed a lack of recovery after a 3-year post-dredging period (1998-2001) on a deep (65-75 m) offshore sandy bank on the Scotian Shelf, Canada. Follow-up sidescan sonar surveys were carried out 5 and 10 years after dredging (2003, 2008) in order to identify long-term processes of seabed recovery. Grab sampling was carried out 10 years after dredging to identify post-dredging commercial bivalve recruitment. Changes in the seafloor, including dredge tracks, were documented with a series of 7 sidescan sonar surveys between 1998 and 2008. A sediment mobility model was constructed based on modeled tidal current and hindcast wave data over this time period to quantify natural seabed disturbance and interpret changes to the dredge tracks mapped by sidescan sonar surveys. The model indicated that tidal currents had minimal effect on sediment mobilization. The main driving force associated with re-working of surficial sediments as evidenced by deterioration of dredge tracks in sonograms was annual fall/winter storms. While the annual frequency of storms and associated wave heights was variable, the observations and sediment mobility calculations suggest that the most influential variable is the magnitude of individual large storms, specifically storms with a significant wave height of ∼11 m. These storms are capable of generating mobile sediment layers of 20-30 cm thickness, equivalent to the dredge blade cutting depth. It appears that, with minor exceptions, sediment properties have returned to pre-dredging conditions 10 years after dredging in this habitat. Based on known age-length relationships, the four commercial bivalve species showed very low recruitment at the experimental site over the 10-year post-dredging period. However, this is unlikely due to a dredging effect since a similar pattern was observed in non-dredged areas.

Hydrogeologic framework, hydrology, and water quality in the Pearce Creek Dredge Material Containment Area and vicinity, Cecil County, Maryland, 2010-11

Science.gov (United States)

Dieter, Cheryl A.; Koterba, Michael T.; Zapecza, Otto S.; Walker, Charles W.; Rice, Donald E.

2013-01-01

In 2009, to support an evaluation of the feasibility of reopening the Pearce Creek Dredge Material Containment Area (DMCA) in Cecil County, Maryland, for dredge-spoil disposal, the U.S. Geological Survey (USGS) began to implement a comprehensive study designed to improve the understanding of the hydrogeologic framework, hydrology, and water quality of shallow aquifers underlying the DMCA and adjacent communities, to determine whether or not the DMCA affected groundwater quality, and to assess whether or not groundwater samples contained chemical constituents at levels greater than maximum allowable or recommended levels established by the U.S. Environmental Protection Agency Safe Drinking Water Act. The study, conducted in 2010-11 by USGS in cooperation with the U.S. Army Corps of Engineers, included installation of observation wells in areas where data gaps led earlier studies to be inconclusive. The data from new wells and existing monitoring locations were interpreted and show the DMCA influences the groundwater flow and quality. Groundwater flow in the two primary aquifers used for local supplies-the Magothy aquifer and upper Patapsco aquifer (shallow water-bearing zone)-is radially outward from the DMCA toward discharge areas, including West View Shores, the Elk River, and Pearce Creek Lake. In addition to horizontal flow outward from the DMCA, vertical gradients primarily are downward in most of the study area, and upward near the Elk River on the north side of the DMCA property, and the western part of West View Shores. Integrating groundwater geochemistry data in the analysis, the influence of the DMCA is not only a source of elevated concentrations of dissolved solids but also a geochemical driver of redox processes that enhances the mobilization and transport of redox-sensitive metals and nutrients. Groundwater affected by the DMCA is in the Magothy aquifer and upper Patapsco aquifer (shallow water-bearing zone). Based on minimal data, the water quality

Agricultural Rivers at Risk: Dredging Results in a Loss of Macroinvertebrates. Preliminary Observations from the Narew Catchment, Poland

OpenAIRE

Mateusz Grygoruk; Magdalena Frąk; Aron Chmielewski

2015-01-01

Ecosystem deterioration in small lowland agricultural rivers that results from river dredging entails a significant threat to the appropriate ecohydrological conditions of these water bodies, expressed as homogenization of habitats and loss of biodiversity. Our study was aimed at a comparison of abundance and taxonomic structure of bottom-dwelling macroinvertebrates in dredged and non-dredged stretches of small lowland rivers and tributaries of the middle Narew River, namely: Czaplinianka, Tu...

MATERIALS FOR THE FINAL COVER OF SANITARY LANDFILLS

OpenAIRE

Davorin Kovačić

1994-01-01

The paper deals with the selection of materials for the sea¬ling layer in the final cover of sanitary landfills. The sealing la¬yer is the most critical component of the final cover. Its role is to minimize percolation of water through the final cover. Ma¬terials used for the construction of the sealing layer are either of mineral origin (compacted clay) or geosynthetic (geomem¬brane). They are most often used in combination creating com¬posite liners. Recently alternative materials are also ...

Experimental Study on the Curing Effect of Dredged Sediments with Three Types of Curing Agents

Directory of Open Access Journals (Sweden)

Yan Lei-Ming

2016-01-01

Full Text Available Sediment solidification technology is widely used to dispose dredged sediment, three types of curing agents were used in this study to solidified the dredged sediment from shallows in Nantong with three types of curing agents: JY, ZL and FJ. The results showed that the optimal additive amounts of these three curing agents were 140g JY, 16g ZL, 2.0g FJ per 1000g of the dredged sediment respectively, their 28d USC were up to 2.48 MPa, 2.96 MPa and 3.00 MPa. JY has obvious early strength effect, which of FJ is not that obvious, but the later-stage strength of sediment solidified by FJ are relatively higher.

The Importance of Providing Multiple-Channel Sections in Dredging Activities to Improve Fish Habitat Environments

Directory of Open Access Journals (Sweden)

Hung-Pin Chiu

2016-01-01

Full Text Available After Typhoon Morakot, dredging engineering was conducted while taking the safety of humans and structures into consideration, but partial stream reaches were formed in the multiple-channel sections in Cishan Stream because of anthropogenic and natural influences. This study mainly explores the distribution of each fish species in both the multiple- and single-channel sections in the Cishan Stream. Parts of the environments did not exhibit significant differences according to a one-way ANOVA comparing the multiple- and single-channel sections, but certain areas of the multiple-channel sections had more diverse habitats. Each fish species was widely distributed by non-metric multidimensional scaling in the multiple-channel sections as compared to those in the single-channel sections. In addition, according to the principal component analysis, each fish species has a preferred environment, and all of them have a wide choice of habitat environments in the multiple-channel sections. Finally, the existence of multiple-channel sections could significantly affect the existence of the fish species under consideration in this study. However, no environmental factors were found to have an influence on fish species in the single-channel sections, with the exception of Rhinogobius nantaiensis. The results show that providing multiple-channel sections in dredging activities could improve fish habitat environments.

Impact on a fish assemblage of the maintenance dredging of a navigation channel in a tropical coastal ecosystem

OpenAIRE

Demarques Ribeiro da Silva Junior; Sérgio Ricardo Santos; Marcelo Travassos; Marcelo Vianna

2012-01-01

Dredging and dredge-spoil disposal are among the major problems in coastal management. Many of the scientific contributions concerning the impacts of this practice are based on the study of sessile organisms and subtropical environments. We evaluated changes in the composition and abundance of a fish assemblage resulting from dredging and sediment disposal at the mouth and in the adjacent waters of the Caravelas River on the north-eastern coast of Brazil. Samples were collected in two directl...

MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR.

Energy Technology Data Exchange (ETDEWEB)

STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

1998-05-01

One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from our nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from U.S. waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect our environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions.

Wave Glider Monitoring of Sediment Transport and Dredge Plumes in a Shallow Marine Sandbank Environment.

Science.gov (United States)

Van Lancker, Vera; Baeye, Matthias

2015-01-01

As human pressure on the marine environment increases, safeguarding healthy and productive seas increasingly necessitates integrated, time- and cost-effective environmental monitoring. Employment of a Wave Glider proved very useful for the study of sediment transport in a shallow sandbank area in the Belgian part of the North Sea. During 22 days, data on surface and water-column currents and turbidity were recorded along 39 loops around an aggregate-extraction site. Correlation with wave and tidal-amplitude data allowed the quantification of current- and wave-induced advection and resuspension, important background information to assess dredging impacts. Important anomalies in suspended particulate matter concentrations in the water column suggested dredging-induced overflow of sediments in the near field (i.e., dynamic plume), and settling of finer-grained material in the far field (i.e., passive plume). Capturing the latter is a successful outcome to this experiment, since the location of dispersion and settling of a passive plume is highly dependent on the ruling hydro-meteorological conditions and thus difficult to predict. Deposition of the observed sediment plumes may cause habitat changes in the long-term.

Wave Glider Monitoring of Sediment Transport and Dredge Plumes in a Shallow Marine Sandbank Environment.

Directory of Open Access Journals (Sweden)

Vera Van Lancker

Full Text Available As human pressure on the marine environment increases, safeguarding healthy and productive seas increasingly necessitates integrated, time- and cost-effective environmental monitoring. Employment of a Wave Glider proved very useful for the study of sediment transport in a shallow sandbank area in the Belgian part of the North Sea. During 22 days, data on surface and water-column currents and turbidity were recorded along 39 loops around an aggregate-extraction site. Correlation with wave and tidal-amplitude data allowed the quantification of current- and wave-induced advection and resuspension, important background information to assess dredging impacts. Important anomalies in suspended particulate matter concentrations in the water column suggested dredging-induced overflow of sediments in the near field (i.e., dynamic plume, and settling of finer-grained material in the far field (i.e., passive plume. Capturing the latter is a successful outcome to this experiment, since the location of dispersion and settling of a passive plume is highly dependent on the ruling hydro-meteorological conditions and thus difficult to predict. Deposition of the observed sediment plumes may cause habitat changes in the long-term.

Effects of dredging operations on soft bottom macrofauna in a harbor in the Patos Lagoon estuarine region of southern Brazil

Directory of Open Access Journals (Sweden)

C. E. Bemvenuti

Full Text Available An evaluation was made of the effects of dredging on the soft bottom community in the channel of the Rio Grande harbor in the Patos Lagoon estuarine region of southern Brazil. During four seasonal cruises, samples were collected from nine biological stations, one of which was located outside the dredged area. Three macrobenthic samples were collected on each cruise from each station, using a 0.08 m² van Veen grab. A cluster analysis was applied to group summer and autumn cruise stations before the dredging period, revealing larger numbers of species (35-36 spp. and higher densities of organisms. The station located outside the dredging area was always included in this group, regardless of the sampling period or conditions of salinity. Another group comprised the winter and spring stations during the dredging period. This group was characterized by stations with the fewest species (20-18 spp. and the lowest and most variable organism densities. The efficient strategies of resilience of the dominant estuarine species may minimize the effects of dredging on the biota through the rapid recolonization of the soft bottom of the harbor channel.

MATERIALS FOR THE FINAL COVER OF SANITARY LANDFILLS

Directory of Open Access Journals (Sweden)

Davorin Kovačić

1994-12-01

Full Text Available The paper deals with the selection of materials for the sea¬ling layer in the final cover of sanitary landfills. The sealing la¬yer is the most critical component of the final cover. Its role is to minimize percolation of water through the final cover. Ma¬terials used for the construction of the sealing layer are either of mineral origin (compacted clay or geosynthetic (geomem¬brane. They are most often used in combination creating com¬posite liners. Recently alternative materials are also used like paper mill sludge or discarded swelling clay.

Thermal Consolidation of Dredge Sand for Artificial Reef Formations

Science.gov (United States)

Trevino, Alexandro

Coral Reef ecosystems have degraded over years due to a variety of environmental issues such as ocean acidification. The continuous stress has detrimental effects on coral reef ecosystems that can possibly lead to the loss of the ecosystem. Our research aims to construct a prototype of an artificial reef by consolidating dredge sand from the ship channels of South Texas. Consolidation is achieved through an aluminum polytetrafluoroethylene self-propagating high temperature process that yields a solid formation to mimic the physical properties of coral reef structures. Using thermodynamic calculations, the variation of initial components was determined that reached an adiabatic temperature with a maximum peak of 2000 K. The self-sustaining reaction front was obtained to rigidly consolidate the dredge sand only at composition concentrations exceeding a critical value of 24 wt.% Al, and 3 wt.% PTFE. The combustion synthesis produced a consolidated formation with a hardened and porous structure.

An experimental study on dredge spoil of estuarine sediments in the bay of seine (France): A morphosedimentary assessment

Science.gov (United States)

Marmin, Stella; Lesueur, Patrick; Dauvin, Jean Claude; Samson, Sandrine; Tournier, Patrice; Gallicher Lavanne, Albert; Dubrulle-Brunaud, Carole; Thouroude, Coralie

2016-03-01

Studies on the consequences of dredging on estuarine morphology and its sedimentary dynamics are common, but the impacts of dumping dredge spoil in coastal open settings are rarely found in scientific literature. An experimental study was conducted over the period 2012-2013 to monitor the physical impacts of dredged material dumped at two adjacent sites (one million cubic metres at each) on the inner shelf of the Bay of Seine in France (eastern part of the English Channel, La Manche). As recently reinforced in the EU Marine Strategy Framework Directive (MSFD), knowledge on the location and intensity of human impacts (e.g. on marine ecosystems) is critical for effective marine management and conservation. So, two methods of disposition were tested to evaluate the impacts of dumping on the environment and thus propose recommendations for future dumping. The strategy is based on a Before-After-Control-Impact (BACI) approach, in which the spatio-temporal variability was studied by analysing the morphological and sedimentological characteristics over a period of 28 months, from November 2011 to April 2014, also including recovery of the seafloor after cessation of the dumping activities. The first experimental dumping operation (MASED) was carried out regularly for 8 months at a single point and generating a conical deposit of 5 m in height, while the second dumping (MABIO) lasted for 12 months involving four steps in the dumping process. In the second case, a wider area was covered, leading to the formation of a smaller deposit of 2 m in height. The dumped deposits consisted of muddy fine sand, whereas the inner shelf seafloor in this area is covered with fine to medium sand. As a result, muddy fine sand accumulated at or near the two dumping sites, with a maximum mud (i.e. particles4 Φ) content of 50% compared todredged material remained at the end of the dumping periods. After dumping ceased, a further 5% of material for MABIO and 20% for MASED, was transported out

Multi-platform assessment of turbidity plumes during dredging operations in a major estuarine system

Science.gov (United States)

Caballero, Isabel; Navarro, Gabriel; Ruiz, Javier

2018-06-01

Dredging activities in estuaries frequently cause deleterious environmental effects on the water quality which can impact flora, fauna, and hydrodynamics, among others. A medium- and high-resolution satellite-based procedure is used in this study to monitor turbidity plumes generated during the dredging operations in the Guadalquivir estuary, a major estuarine system providing important ecosystem services in southwest Europe. A multi-sensor scheme is evaluated using a combination of five public and commercial medium- and high-resolution satellites, including Landsat-8, Sentinel-2A, WorldView-2, WorldView-3, and GeoEye-1, with pixel sizes ranging from 30 m to 0.3 m. Applying a multi-conditional algorithm after the atmospheric correction of the optical imagery with ACOLITE, Sen2Cor and QUAC processors, it is demonstrated the feasibility to monitoring suspended solids during dredging operations at a spatial resolution unachievable with traditional satellite-based ocean color sensors (>300 m). The frame work can be used to map on-going, post and pre-dredging activities and asses Total Suspended Solids (TSS) anomalies caused by natural and anthropogenic processes in coastal and inland waters. These promising results are suitable to effectively improve the assessment of features relevant to environmental policies for the challenging coastal management and might serve as a notable contribution to the Earth Observation Program.

Declining metal levels at Foundry Cove (Hudson River, New York): Response to localized dredging of contaminated sediments

International Nuclear Information System (INIS)

Mackie, Joshua A.; Natali, Susan M.; Levinton, Jeffrey S.; Sanudo-Wilhelmy, Sergio A.

2007-01-01

This study examines the effectiveness of remediating a well-recognized case of heavy metal pollution at Foundry Cove (FC), Hudson River, New York. This tidal freshwater marsh was polluted with battery-factory wastes (1953-1979) and dredged in 1994-1995. Eight years after remediation, dissolved and particulate metals (Cd, Co, Cu, Pb, Ni, and Ag) were found to be lower than levels in the lower Hudson near New York City. Levels of metals (Co, Ni, Cd) on suspended particles were comparatively high. Concentrations of surface sediment Cd throughout the marsh system remain high, but have decreased both in the dredged and undredged areas: Cd was 2.4-230 mg/kg dw of sediment in 2005 vs. 109-1500 mg/kg in the same area in 1983. The rate of tidal export of Cd from FC has decreased by >300-fold, suggesting that dredging successfully stemmed a major source of Cd to the Hudson River. - Dredging of a hotspot of metal-contaminated sediment is associated with a recognizable local and river-wide decline in cadmium in the Hudson River, New York

Density-Driven Currents and Deposition of Fine Materials

DEFF Research Database (Denmark)

Saremi, Sina

Dredging is a key element in river, ports, coastal and offshore development. In general dredging is conducted for excavation at the river,lake or seabed, relocation of the material, maintenance of the navigation channels, mining underwater deposits, land reclamation or cleaning up the environment...... and the local conditions determine the level of environmental interference and the impacts caused by the dredging projects. Sediment spillage from hopper overflow constitutes a source for sediment plumes and can also impact the turbidity of aquatic environments. The overflowing mixture is often different from...... the mixture pumped into the hopper (the inflow), because the mixture undergoes compositional transformation as a result of different timescales in the segregation of the various sediment fractions. A proper description of the compositional transformation during filling and subsequent overflow stages can...

Quantification of physical properties of dredged sediments during physical ripening

NARCIS (Netherlands)

Vermeulen, J.; Dijk, S.G.; Grotenhuis, J.T.C.; Rulkens, W.H.

2005-01-01

The soil formation process ripening can be used as a bioremediation technique for dredged sediments that are polluted with organic chemicals. Currently, data are lacking that quantify the effects of physical ripening on parameters that affect aerobic bioremediation. We quantified the effects of

Southern Monterey Bay Littoral Cell CRSMP CEMEX Mine Dredge Pond 2008

Data.gov (United States)

California Natural Resource Agency — Location of the CEMEX mine dredge pond at Lapis Sand Plant, Marina, CA. Southern Monterey Bay has been the most intensively mined shoreline in the U.S. Sand mining...

Responses of macroinvertebrates and local environment to short-term commercial sand dredging practices in a flood-plain lake.

Science.gov (United States)

Meng, Xingliang; Jiang, Xiaoming; Li, Zhengfei; Wang, Jun; Cooper, Keith M; Xie, Zhicai

2018-08-01

In parts of the developing world, the expansion of industrial sand mining activities has led to serious environmental concerns. However, current understanding of the effects of this activity on an inland water ecosystem remains limited. Herein, we choose the "most affected" lake in China (Dongting Lake), to assess short-term (1year) effects of sand dredging on key environmental parameters and on the structure of the macroinvertebrate assemblage. Within the dredged area we observed increases in water depth (on average 2.17m), turbidity and changes in sediment composition (e.g., increase in % medium sand, and a decrease in % clay). In addition, dredging was associated with a 50 % reduction in taxa richness, Simpson and Shannon-Wiener indices, and a 72 and 99 % reduction in abundance and biomass, respectively. Indirect effects were also observed in the zone surrounding the extraction sites (ca. 500m), most likely as a result of the dredging processes (e.g., sediment screening and overspill) and water flow. No such effects were observed at a nearby reference site. The direct removal of sediment and indirect alteration of physical conditions (e.g., water depth, turbidity and sediment composition) appear to be the most likely cause of variations in the benthic community. Implications of our findings for the planning, management and monitoring of sand dredging in inland waters are discussed. Copyright © 2018 Elsevier B.V. All rights reserved.

75 FR 35660 - Massachusetts: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2010-06-23

... copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form... hard copy at the following two locations: (i) Massachusetts Department of Environmental Protection...: dredged material exemption at 40 CFR 261.4(g)--State: formatting corrections to previously authorized...

IMPACT OF SAND DREDGING AND SILT EXTRACTION ACTIVITY ON RIVER AND ITS CHARACTERISTICS : A REVIEW

OpenAIRE

Vishal S. Gholap

2016-01-01

The present research work highlights the influences of sand dredging and extensive silt quarrying activity on rivers. The sand dredging activity and its impact on the river processes and other river environment have discussed in the present review paper. It has seen that most of the rivers and their processes are highly degraded and altered due to these activities. In India and almost in the regions of Maharashtra, the ground water is decreasing and such activities also invited the problems ...

Assessment of Mud-Capped Dredge Pit Evolution Offshore Louisiana: Implications to Sand Excavation and Coastal Restoration

Science.gov (United States)

Xu, K.; Miner, M. D.; Bentley, S. J.; Li, C.; Obelcz, J.; O'Connor, M. C.

2016-02-01

The shelf offshore Louisiana is characterized by a dominantly muddy seafloor with a paucity of restoration-quality sand proximal to shore. Discrete sand deposits associated with ancient rivers that incised the shelf during lower sea-level positions occur close to shore. These shelf channel sands have been targeted for coastal restoration projects resulting in significant cost savings over more distal deposits. Several recent projects targeted shelf paleo-fluvial deposits comprising relatively deep (10 m) channel sands underlying a muddy overburden. Because of contrasting characteristics of cohesive mud vs. non-cohesive sand and potential modern fluvial mud supply from the Mississippi and Atchafalaya Rivers, long term pit evolution is poorly understood relative to their more common sand-only counterparts. Alterations to seafloor topography from dredging shelf sediment resources can potentially affect oil and gas infrastructure or other resources of concern (i.e. historic shipwrecks) located proximal to dredge pits. Site-specific data required to make accurate predictions and empirical measurements to test and validate predictive models were only available for Peveto Channel offshore Holly Beach, Louisiana. Here we present new geophysical and geological data (bathymetry, sidescan, subbottom, and radionuclide of sediment cores) and physical oceanographic observations (hydrodynamics and sediment dynamics) collected at Raccoon Island (dredged in 2013) dredge pit in Louisiana. These field data collections along with pre-existing data provide a time-series to capture evolution at Raccoon Island post-excavation. Conceptual morphological models will be developed for dredge pit evolution and testing effectiveness of setback buffers protecting pipelines, habitats, and cultural resources. Our results will increase decision making ability regarding safety and protecting environmental and cultural resources, and better management of valuable sand resources.

[Effect of suspended silt from dredging at Yangtze estuary on Brachionus plicatilis].

Science.gov (United States)

Wang, Jinqui; Xu, Zhaoli; Shi, Chun; Chen, Yaqu

2002-07-01

The effect of suspended silt from dredging at Yangtze estuary on Brachionus plicatilis was investigated by clonal culture (to construct life table) and population accumulative culture. The intrinsic increasing rate of the rotifer population was greatly reduced under different concentrations (1, 3, 5, 7 and 9 mg.ml-1) of silt, from 29.6% to 64.1%, and to a maximum of 130.0%. The suspended silt affected population survival rate, rather than its reproduction rate. In accumulative culture, the densities of female, males, parthenogenetic eggs, and resting eggs in the population were not affected by silt. It was concluded that the presence of suspended silt should have a certain negative influence on the rotifer population in dredging Yangtze estuary.

Simulations of dredged sediment spreading on a Posidonia oceanica meadow off the Ligurian coast, Northwestern Mediterranean.

Science.gov (United States)

Capello, M; Cutroneo, L; Ferranti, M P; Budillon, G; Bertolotto, R M; Ciappa, A; Cotroneo, Y; Castellano, M; Povero, P; Tucci, S

2014-02-15

The sandy deposits from dredging can have negative effects on the environment such as increase in suspended solids in the water column and their consequent transport. An experimental study was conducted to characterize water masses, dynamics, and sedimentation rates on the Ligurian continental shelf (Italy), where both a sand deposit, that could be used for beach nourishment, and a nearby Posidonia oceanica meadow coexist. The environmental plan provides a mathematical simulation of the sediment-dispersion to evaluate the possible impact on the meadow. It has been calculated that the dredging could double the concentration of suspended particles, but its scheduling will preclude a sediment accumulation. All the information obtained from this work will be used to study the environmental feasibility of the sand deposit exploitation and as starting point for drawing up the monitoring plan in case of dredging. Copyright © 2013 Elsevier Ltd. All rights reserved.

Characterization of Underwater Sounds Produced by a Hydraulic Cutterhead Dredge during Maintenance Dredging in the Stockton Deepwater Shipping Channel, California

Science.gov (United States)

2014-03-01

underwater sound had not been linked to dredging projects. However, concerns for negative impacts of underwater noise on aquatic species (e.g. salmon ... METHODS Study site. The Port of Stockton is a major inland deepwater port in Stockton, California, located on the San Joaquin River before it joins... of Cook Inlet, Alaska. The authors reported that ambient sound levels ranged from 95 dB in the Knik Arm to 124 dB near Point Possession on an incoming

The Influence of Organic Material and Temperature on the Burial Tolerance of the Blue Mussel, Mytilus edulis: Considerations for the Management of Marine Aggregate Dredging.

Directory of Open Access Journals (Sweden)

Richard S Cottrell

temperature during sedimentation events may lead to an overestimation of the tolerance of benthic species to smothering from dredged material.

Effects of sediment dredging on nitrogen cycling in Lake Taihu, China: Insight from mass balance based on a 2-year field study.

Science.gov (United States)

Yu, Juhua; Fan, Chengxin; Zhong, Jicheng; Zhang, Lu; Zhang, Lei; Wang, Changhui; Yao, Xiaolong

2016-02-01

Sediment dredging can permanently remove pollutants from an aquatic ecosystem, which is considered an effective approach to aquatic ecosystem restoration. In this work, a 2-year field simulation test was carried out to investigate the effect of dredging on nitrogen cycling across the sediment-water interface (SWI) in Lake Taihu, China. The results showed that simulated dredging applied to an area rich in total organic carbon (TOC) and total nitrogen (TN) slightly reduced the NH4(+)-N release from sediments while temporarily enhanced the NH4(+)-N release in an area with lower TOC and/or TN (in the first 180 days), although the application had a limited effect on the fluxes of NO2(-)-N and NO3(-)-N in both areas. Further analysis indicated that dredging induced decreases in nitrification, denitrification, and anaerobic ammonium oxidation (anammox) in sediments, notably by 76.9, 49.0, and 89.9%, respectively, in the TOC and/or TN-rich area. Therefore, dredging slowed down nitrogen cycling rates in sediments but did not increase N loading to overlying water. The main reason for the above phenomenon could be attributed to the removal of the surface sediments enriched with more TOC and/or TN (compared with the bottom sediments). Overall, to minimize internal N pollution, dredging may be more applicable to nutrient-rich sediments.

Impact of maintenance dredging on macrobenthic community structure of a tropical estuary

Digital Repository Service at National Institute of Oceanography (India)

Rehitha, T.V.; Ullas, N.; Vineetha, G.; Benny, P.Y.; Madhu, N.V.; Revichandran, C.

This paper demonstrates the impact of maintenance dredging activities on the macrobenthic community structure of a tropical monsoonal estuary (Cochin estuary), located in the southwest coast of India for three consecutive years. The results...

77 FR 67345 - Final Environmental Impact Statement/Environmental Impact Report (EIS/EIR) for the Clearwater...

Science.gov (United States)

2012-11-09

...The U.S. Army Corps of Engineers (Corps) in conjunction with the Sanitation Districts of Los Angeles County (Sanitation Districts) has completed a Final Environmental Impact Statement/Environmental Impact Report (EIS/EIR) for the Clearwater Program. The Clearwater Program is a comprehensive planning effort undertaken by the Sanitation Districts for the Joint Outfall System, a regional wastewater management system serving approximately 4.8 million people in 73 cities and unincorporated areas in Los Angeles County. A major component of the Clearwater Program is the evaluation of alternatives for construction of a new ocean outfall and rehabilitation of the existing ocean outfalls. Both activities would entail discharge of dredged and fill material in waters of the United States, work in navigable waters of the United States, and the transport of dredged material for ocean disposal. These activities would require authorization from the Corps pursuant to Section 404 of the Clean Water Act, Section 10 of the Rivers and Harbors Act, and Section 103 of the Marine Protection, Research, and Sanctuaries Act, respectively. The Draft EIS/EIR was circulated for a 57-day review period from February 13, 2012 through April 10, 2012. The Corps and the Sanitation Districts reviewed and provided responses to 19 agency comments and 33 public comments in preparing the Final EIS/EIR. The Final EIS/EIR, including a Draft 404(b)(1) alternatives analysis, is available for a 31-day review period from November 9, 2012 through December 10, 2012. The document is accessible via the World- Wide Web at www.ClearwaterProgram.org. Alternatively, printed copies are available at the following locations: Sanitation Districts of Los Angeles County, 1955 Workman Mill Road, Whittier, California; Carson Regional Library, 151 East Carson Street, Carson, California; Los Angeles Public Library, San Pedro Branch, 931 South Gaffey Street, San Pedro, California; and Los Angeles Public Library, Wilmington

Health risk assessment linked to filling coastal quarries with treated dredged seaport sediments

International Nuclear Information System (INIS)

Perrodin, Yves; Donguy, Gilles; Emmanuel, Evens; Winiarski, Thierry

2014-01-01

Dredged seaport sediments raise complex management problems since it is no longer possible to discharge them into the sea. Traditional waste treatments are poorly adapted for these materials in terms of absorbable volumes and cost. In this context, filling quarries with treated sediments appears interesting but its safety regarding human health must be demonstrated. To achieve this, a specific methodology for assessing health risks has been developed and tested on three seaport sediments. This methodology includes the development of a conceptual model of the global scenario studied and the definition of specific protocols for each of its major steps. The approach proposed includes in particular the use of metrological and experimental tools that are new in this context: (i) an experimental lysimeter for characterizing the deposit emissions, and (ii) a geological radar for identifying potential preferential pathways between the sediment deposit and the groundwater. The application of this approach on the three sediments tested for the scenario studied showed the absence of health risk associated with the consumption of groundwater for substances having a “threshold effect” (risk quotient −6 ). - Highlights: • The release of polluted dredged seaport sediments into the sea must be avoided. • Their use after treatment for the filling-up of quarries is proposed by managers. • An original health risk assessment methodology was created to validate this option. • It includes the use of a lysimeter and a georadar for the exposure assessment stage. • The example studied concludes to a health risk linked to arsenic in the groundwater

MAINTAINING ACCESS TO AMERICA'S INTERMODAL PORTS/TECHNOLOGIES FOR DECONTAMINATION OF DREDGED SEDIMENT: NEW YORK/NEW JERSEY HARBOR

Energy Technology Data Exchange (ETDEWEB)

STERN,E.A.; JONES,K.; DONATO,K.; PAULING,J.D.; SONTAG,J.G.; CLESCERI,N.L.; MENSINGER,M.C.; WILDE,C.L.

1998-05-01

One of the greatest drivers for maintaining access to America's Intermodal ports and related infrastructure redevelopment efforts over the next several years will be the control and treatment of contaminated sediments dredged from the nation's waterways. More than 306 million cubic meters (m{sup 3}) (400 million cubic yards [cy]) of sediments are dredged annually from US waterways, and each year close to 46 million m{sup 3} (60 million cy) of this material is disposed of in the ocean (EPA 842-F-96-003). The need to protect the environment against undesirable effects from sediment dredging and disposal practices is gaining increased attention from the public and governmental agencies. Meeting this need is a challenging task not only from the standpoint of solving formidable scientific and engineering problems, but also, and more importantly, from the need to implement complex collaborations among the many different parties concerned with the problem. Some 40 years ago, C.P. Snow pointed out the problems involved in communicating between the two cultures of the sciences and the humanities (Snow, 1993). Today, it is necessary to extend Snow's concept to a multicultural realm with groups that include governmental, industrial, environmental, academic, and the general public communicating in different languages based on widely different fundamental assumptions. The handling of contaminated sediments in the Port of New York/New Jersey (Port) exemplifies this problem. This paper describes a multicultural team that has formed as the result of a Congressional mandate for the development of procedures suitable for the decontamination of sediments in the Port under the Water Resources Development Act (WRDA) of 1992 (Section 405C) and 1996 (Section 226).

Study on vibration characteristics of the shaft system for a dredging pump based on FEM

International Nuclear Information System (INIS)

Zhai, L M; Liu, X; He, L Y; Wang, Z W; Qin, L; Liu, C Y; He, Y

2012-01-01

The dynamic characteristics of the shaft system for a dredging pump were studied with the Finite Element Method (FEM) by SAMCEF ROTOR. At first, the influence of the fluid-solid coupling interaction of mud water and impeller, water sealing and pump shaft on the lateral critical speeds were analyzed. The results indicated that the mud water must be taken into consideration, while the water sealing need not to. Then the effects of radial and thrust rolling bearings on the lateral critical speeds were discussed, which shows that the radial bearing close to the impeller has greatest impact on the 1st order critical speed. At last, the upper and lower limits of the critical speeds of lateral, axial and torsional vibration were calculated. The rated speed of the dredging pump was far less than the predicted critical speed, which can ensure the safe operation of the unit. Each vibration mode is also shown in this paper. This dynamic analysis method offers some reference value on the research of vibration and stability of the shaft system in dredging pump.

Final Environmental Impact Statement on Modifications to Monroe Harbor, Michigan.

Science.gov (United States)

1980-02-01

INVOLVED IF THE PROPOSED ACTION SHOULD BE IMPLEMENTED 8.01 The labor , materials and fuel commited for the dredging, dike construction and disposal...political ;ressure intervenes to force a diecision. We do not believe -a decisions reached in such a clima ~te arec cocucive to sound natural resource r

Sediment Plumes Resulting from the Port of Miami Dredging: Analysis and Interpretation Using Satellite Data and Long Term Monitoring Programs

Science.gov (United States)

Barnes, B. B.; Hu, C.; Kovach, C.; Silverstein, R. N.

2016-02-01

From November 2013 through mid-2015, large turbidity plumes were observed offshore the Port of Miami (Florida, USA), likely associated with a project to deepen and widen the Miami Harbor channels. Using data from local monitoring programs, however, it is difficult to estimate the size, duration, extent, and severity (relative to natural turbidity events) of these plumes. In contrast, satellite observing systems offer a platform from which these plumes can be monitored and placed in historical context. As such, turbidity plumes captured by MODIS (Aqua) and Landsat 8 reflectance data were manually outlined. For MODIS, these delineations were refined using reflectance anomaly thresholds, determined from pre-dredging data. Long term records of local environmental conditions were used to account for conditions (e.g., wind speed, tidal stage) for which elevated reflectance data might be expected in the absence of dredging. The spatial extent of turbidity plumes observed in the Port of Miami region during the dredging period ranged from 127 and 228 km2, at least 5 times that immediately prior to dredging. The frequency of observed plumes in satellite imagery increased from 23% to 84% after dredging began, while temporal differences in plume location, severity, and size were also observed. Turbidity plumes may have large adverse effects on coral communities, and this region is home to many species of coral (including some considered threatened by the US Endangered Species Act). Indeed, over 11 km2 of coral area was affected by these plumes, with some locations within plume delineations on nearly 40% of images. The approaches developed in this work, in particular the focus on historical norms after considering all perturbation factors, may be included in monitoring and assessment of this and future dredging activities, especially where fragile marine ecosystems may potentially be impacted.

[Ecological risk evaluation of heavy metals of the typical dredged mud in Shanghai].

Science.gov (United States)

Tang, Qing-Li; Cheng, Jin-Ping; Gao, Hao-Min; Yao, Lei; Jiang, Zhen-Yi; Wu, Yang; Xie, Cui-Song; Liang, Hai; Wang, He; Pi, Shuai-Shuai; Yu, Zhao-Yi

2013-04-01

In order to discuss the potential ecological risk of heavy metals of the typical dredged mud in Shanghai, the Hakanson potential ecological risks method was used to analyse and assess the potential ecological risks of heavy metals, including Hg, Cd, Cu, Pb, As,Cr and Zn in dredged mud from the following three areas-the dock apron of Huangpu River, the mouth of the Yangtze River and inland waterways. The results showed that the mean values of ecological risk index (Er(i)) of the seven heavy metals are 20.05, 17.49, 8.82, 5.71, 4.68, 1.74 and 1.13, respectively, all of which belonged to the low ecological risk; Cd (one location in inland waterways) and Hg (three locations in the mouth of the Yangtze River and one location in inland waterways) are the most hazardous elements, with the Er(i) > 40, which belonged to the medium ecological risk or the high ecological risk, and other elements belonged to the low ecological risk. From the results of ecological risk indices(ERI) of the heavy metals in Shanghai dredged mud, the risk of the heavy metals belonged to the low ecological risk. The ERI of inland waterways, the mouth of the Yangtze River and the dock apron of the Huangpu River were 81.4, 57.7 and 52.5, respectively, which all belong to the low ecological risk.

Polycyclic aromatic hydrocarbon-polluted dredged peat sediments and earthworms: a mutual interference

NARCIS (Netherlands)

Eijsackers, H.J.P.; Jonge, de S.; Muijs, B.; Slijkerman, D.; Gestel, van C.A.M.

2001-01-01

In lowland areas of the Netherlands, any peat sediments will gradually become enriched with anthropogenically derived Polycyclic Aromatic Hydrocarbons. Due to Dutch policy standards these (anaerobic) sediments are not allowed to be dredged and placed onto land. Under aerobic conditions, however,

Dredging Equipment Modifications for Detection and Removal of Ordnance

Science.gov (United States)

2006-12-01

Electromagnet at a concrete recycler facility. ...........................................................71 viii TABLES Table 3-1. Hydraulic pipeline...discharge. The slurry only arched about 1.5 m (5 ft) from the spreader , and the solids rapidly settled from the fluid. When the original project was...dredge. 3.4.4 San Diego A concrete recycler was visited in two different sites in San Diego, California. The major interest for these visits was to

Assessing the Potential for Salmon Recovery via Floodplain Restoration: A Multitrophic Level Comparison of Dredge-Mined to Reference Segments

Science.gov (United States)

Bellmore, J. Ryan; Baxter, Colden V.; Ray, Andrew M.; Denny, Lytle; Tardy, Kurt; Galloway, Evelyn

2012-03-01

Pre-restoration studies typically focus on physical habitat, rather than the food-base that supports aquatic species. However, both food and habitat are necessary to support the species that habitat restoration is frequently aimed at recovering. Here we evaluate if and how the productivity of the food-base that supports fish production is impaired in a dredge-mined floodplain within the Yankee Fork Salmon River (YFSR), Idaho (USA); a site where past restoration has occurred and where more has been proposed to help recover anadromous salmonids. Utilizing an ecosystem approach, we found that the dredged segment had comparable terrestrial leaf and invertebrate inputs, aquatic primary producer biomass, and production of aquatic invertebrates relative to five reference floodplains. Thus, the food-base in the dredged segment did not necessarily appear impaired. On the other hand, we observed that off-channel aquatic habitats were frequently important to productivity in reference floodplains, and the connection of these habitats in the dredged segment via previous restoration increased invertebrate productivity by 58%. However, using a simple bioenergetic model, we estimated that the invertebrate food-base was at least 4× larger than present demand for food by fish in dredged and reference segments. In the context of salmon recovery efforts, this observation questions whether additional food-base productivity provided by further habitat restoration would be warranted in the YFSR. Together, our findings highlight the importance of studies that assess the aquatic food-base, and emphasize the need for more robust ecosystem models that evaluate factors potentially limiting fish populations that are the target of restoration.

Assessing the potential for salmon recovery via floodplain restoration: a multitrophic level comparison of dredge-mined to reference segments.

Science.gov (United States)

Bellmore, J Ryan; Baxter, Colden V; Ray, Andrew M; Denny, Lytle; Tardy, Kurt; Galloway, Evelyn

2012-03-01

Pre-restoration studies typically focus on physical habitat, rather than the food-base that supports aquatic species. However, both food and habitat are necessary to support the species that habitat restoration is frequently aimed at recovering. Here we evaluate if and how the productivity of the food-base that supports fish production is impaired in a dredge-mined floodplain within the Yankee Fork Salmon River (YFSR), Idaho (USA); a site where past restoration has occurred and where more has been proposed to help recover anadromous salmonids. Utilizing an ecosystem approach, we found that the dredged segment had comparable terrestrial leaf and invertebrate inputs, aquatic primary producer biomass, and production of aquatic invertebrates relative to five reference floodplains. Thus, the food-base in the dredged segment did not necessarily appear impaired. On the other hand, we observed that off-channel aquatic habitats were frequently important to productivity in reference floodplains, and the connection of these habitats in the dredged segment via previous restoration increased invertebrate productivity by 58%. However, using a simple bioenergetic model, we estimated that the invertebrate food-base was at least 4× larger than present demand for food by fish in dredged and reference segments. In the context of salmon recovery efforts, this observation questions whether additional food-base productivity provided by further habitat restoration would be warranted in the YFSR. Together, our findings highlight the importance of studies that assess the aquatic food-base, and emphasize the need for more robust ecosystem models that evaluate factors potentially limiting fish populations that are the target of restoration.

Profile constructing and elevation design of soil reclaimed by hydraulic dredge pump in mining areas

Energy Technology Data Exchange (ETDEWEB)

Longqian, C.; Aiqin, S.; Tianjian, Z. [China Univ. of Mining and Technology, Xuzhou, Jiangsu (China). School of Environmental Science and Spatial Informatics; Mei, L. [China Univ. of Mining and Technology, Xuzhou, Jiangsu (China)

2007-07-01

Underground coal mining is the main method of coal mining in China. The hydraulic dredge pump reclamation method is the basic method used for repairing hydraulic erosion. This paper reviewed land reclamation by hydraulic dredge pump in the Yi'an coal mine of Xuzhou mining area in the east of China, and analyzed the constructing theory of soil profiling. It examined factors such as the height of the ground-water table; the thickness of plough horizon; the length of crops root and the state of soil erosion; and the methods of profile construction and elevation design of soil reclaimed by hydraulic dredge pump. A relevant mathematical model was also developed. The paper discussed the general situation of the study site as well as the basic theory of profile constructing and the profile constructing method. The paper also discussed the elevation design of the reclaimed land. It was concluded that the practice has proved that the methods can make the reclaimed soil keep a similar characteristics to that of original cropped soil, and meet the requirements for elevation of reclaimed land. 8 refs., 1 tab., 2 figs.

Environmental effects of dredging: Alternative dredging equipment and operational methods to minimize sea turtle mortalities. Technical notes

Energy Technology Data Exchange (ETDEWEB)

Dickerson, D.D.; Nelson, D.A.

1990-12-01

Five species of sea turtles occur along the United States coastlines and are listed as threatened or endangered. The loggerhead sea turtle (Caretta caretta) is listed as threatened, while the Kemp`s ridley (Lepidochelys kenipi), the hawksbill (Eretmochelys imbricata), and the leatherback (Dermochelys coriacea) are all less abundant and listed as endangered. Florida breeding populations of the green sea turtle (Chelonia mydas) are listed as endangered, but green turtles in other US waters are considered threatened. The National Marine Fisheries Service (NMFS) has determined, based on the best available information, that because of their life cycle and behavioral patterns only the loggerhead, the green, and the Kemp`s ridley are put at risk by hopper dredging activities (Studt 1987).

Catastrophic shifts in the aquatic primary production revealed by a small low-flow section of tropical downstream after dredging.

Science.gov (United States)

Marotta, H; Enrich-Prast, A

2015-11-01

Dredging is a catastrophic disturbance that directly affects key biological processes in aquatic ecosystems, especially in those small and shallow. In the tropics, metabolic responses could still be enhanced by the high temperatures and solar incidence. Here, we assessed changes in the aquatic primary production along a small section of low-flow tropical downstream (Imboassica Stream, Brazil) after dredging. Our results suggested that these ecosystems may show catastrophic shifts between net heterotrophy and autotrophy in waters based on three short-term stages following the dredging: (I) a strongly heterotrophic net primary production -NPP- coupled to an intense respiration -R- likely supported by high resuspended organic sediments and nutrients from the bottom; (II) a strongly autotrophic NPP coupled to an intense gross primary production -GPP- favored by the high nutrient levels and low solar light attenuation from suspended solids or aquatic macrophytes; and (III) a NPP near to the equilibrium coupled to low GPP and R rates following, respectively, the shading by aquatic macrophytes and high particulate sedimentation. In conclusion, changes in aquatic primary production could be an important threshold for controlling drastic shifts in the organic matter cycling and the subsequent silting up of small tropical streams after dredging events.

Assessing Impacts of Navigation Dredging on Atlantic Sturgeon (Acipenser oxyrinchus)

Science.gov (United States)

2014-11-01

are known to be opportunistic benthivores, feeding primarily on mollusks, polychaete worms, amphipods, isopods, shrimps and small bottom-dwelling...fishes and insect larvae (Smith 1985, Dadswell 2006). Shallow water shoals located adjacent to both sides of the Federal navigation channel, provide a...and J. Hoeman (1982). Distribution and abundance of the Dungeness crab and Crangon shrimp , and dredging-related mortality of invertebrates and fish

Combined environmental stress from shrimp farm and dredging releases in a subtropical coastal lagoon (SE Gulf of California).

Science.gov (United States)

Cardoso-Mohedano, J G; Páez-Osuna, F; Amezcua-Martínez, F; Ruiz-Fernández, A C; Ramírez-Reséndiz, G; Sanchez-Cabeza, J A

2016-03-15

Nutrient pollution causes environmental damages on aquatic ecosystems worldwide. Eutrophication produces impacts in coastal ecosystems, affecting biota and ecosystem services. The Urias coastal lagoon (SE Gulf of California) is a sub-tropical estuary under several environmental pressures such as nutrient inputs from shrimp farm effluents and dredging related to port operations, which can release substances accumulated in sediments. We assessed the water quality impacts caused by these activities and results showed that i) nitrogen was the limiting nutrient, ii) shrimp farm effluents increased particulate organic matter and chlorophyll a in the receiving stations, and iii) dredging activities increased nitrite and reduced dissolved oxygen concentrations. The co-occurrence of the shrimp farm releases and dredging activities was likely the cause of a negative synergistic effect on water quality which mainly decreases dissolved oxygen and increases nitrite concentrations. Coastal zone management should avoid the co-occurrence of these, and likely others, stressors in coastal ecosystems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Notes on dredging in the Great Bitter Lake of the Suez Canal

NARCIS (Netherlands)

Beets, C.

1953-01-01

INTRODUCTION In the summer of 1950, the present writer spent a three weeks' holiday dredging in the Great Bitter Lake. Plans to collect specimens in that area for the Rijksmuseum van Natuurlijke Historie at Leiden had, unfortunately, to be drawn up somewhat hurriedly, but at least the most essential

Health risk assessment linked to filling coastal quarries with treated dredged seaport sediments

Energy Technology Data Exchange (ETDEWEB)

Perrodin, Yves, E-mail: yves.perrodin@entpe.fr [Université de Lyon, ENTPE, UMR CNRS 5023, Laboratoire LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); Donguy, Gilles [Université de Lyon, ENTPE, UMR CNRS 5023, Laboratoire LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France); Emmanuel, Evens [Laboratoire de Qualité de l' Eau et de l' Environnement, Université Quisqueya, BP 796 Port-au-Prince (Haiti); Winiarski, Thierry [Université de Lyon, ENTPE, UMR CNRS 5023, Laboratoire LEHNA, 2 rue Maurice Audin, 69518 Vaulx-en-Velin (France)

2014-07-01

Dredged seaport sediments raise complex management problems since it is no longer possible to discharge them into the sea. Traditional waste treatments are poorly adapted for these materials in terms of absorbable volumes and cost. In this context, filling quarries with treated sediments appears interesting but its safety regarding human health must be demonstrated. To achieve this, a specific methodology for assessing health risks has been developed and tested on three seaport sediments. This methodology includes the development of a conceptual model of the global scenario studied and the definition of specific protocols for each of its major steps. The approach proposed includes in particular the use of metrological and experimental tools that are new in this context: (i) an experimental lysimeter for characterizing the deposit emissions, and (ii) a geological radar for identifying potential preferential pathways between the sediment deposit and the groundwater. The application of this approach on the three sediments tested for the scenario studied showed the absence of health risk associated with the consumption of groundwater for substances having a “threshold effect” (risk quotient < 1), and an acceptable risk for substances having a “non-threshold effect”, with the notable exception of arsenic (individual risk equal to 3.10{sup −6}). - Highlights: • The release of polluted dredged seaport sediments into the sea must be avoided. • Their use after treatment for the filling-up of quarries is proposed by managers. • An original health risk assessment methodology was created to validate this option. • It includes the use of a lysimeter and a georadar for the exposure assessment stage. • The example studied concludes to a health risk linked to arsenic in the groundwater.

Characterizing Seagrass Exposure to Light Attenuation and Turbidity Associated with Dredging Activity in the Gulf Intracoastal Waterway, Sarasota Bay, Florida

Science.gov (United States)

2016-11-01

physical removal of existing submerged aquatic vegetation within the dredging footprint. Indirect impacts to seagrasses may occur in areas near the...W. Bergstromand, and R. A. Batuik. 1993. Assessing water quality with submersed aquatic vegetation . Bioscience 43:86–94. Dixon, L. K. 2000...Rosenbrand, A. Mullie, G. L. Wessel, T. Arts, and I. K. Deibel. 1996. Turbidity caused by dredging: Viewed in perspective. Terra et Aqua 64:10–17

PTM Modeling of Dredged Suspended Sediment at Proposed Polaris Point and Ship Repair Facility CVN Berthing Sites - Apra Harbor, Guam

Science.gov (United States)

2017-09-01

sedimentation outside of the channel footprint. For example, dredging near the edge of the footprint can be confined to time periods when tidal currents...Cases 1 or 2 due to the lower loss rate. Sedimentation rates outside the channel prism are further reduced because all sediment is introduced in the...ER D C/ CH L TR -1 7- 16 PTM Modeling of Dredged Suspended Sediment at Proposed Polaris Point and Ship Repair Facility CVN Berthing

Ecotoxicological risk assessment linked to infilling quarries with treated dredged seaport sediments.

Science.gov (United States)

Perrodin, Yves; Donguy, Gilles; Bazin, Christine; Volatier, Laurence; Durrieu, Claude; Bony, Sylvie; Devaux, Alain; Abdelghafour, Mohammed; Moretto, Robert

2012-08-01

The dredged sediments of polluted seaports now raise complex management problems since it is no longer possible to discharge them into the sea. This results in the need to manage them on land, raising other types of technical, economic and environmental problems. Regarding the technical and economic dimensions, traditional waste treatment methods have proved to be poorly adapted, due to very high costs and low absorbable volumes. In this context, filling quarries in coastal areas with treated sediments could represent an interesting alternative for these materials. Nevertheless, for the environmental dimension, it is necessary to demonstrate that this possibility is harmless to inland ecosystems. Consequently, a specific ecotoxicological risk assessment methodology has been formulated and tested on three sediments taken from seaboards of France, in view to providing an operational and usable tool for the prior validation of any operation to fill quarries with treated seaport sediments. This method incorporates the formulation of a global conceptual model of the scenario studied and the definition of protocols for each of its steps: the characterisation of exposures (based on a simulation of sediment deposit), the characterisation of effects (via the study of sediments ecotoxicity), and the final ecotoxicological risk assessment performed as a calculation of a risk quotient. It includes the implementation in parallel of two types of complementary approach: the "substances" approach derived from the European methodology for assessing new substances placed on the market, and the "matrix" approach which is similar to methods developed in France to assess ecological risks in other domains (waste management, polluted site management, …). The application of this dual approach to the three sediments tested led to conclude with reliability that the project to deposit sediments "1" and "2" presented a low risk for the peripheral aquatic ecosystems while sediment "3

75 FR 38501 - The Release of the Final Environmental Impact Statement (FEIS) for the Town of Nags Head Proposed...

Science.gov (United States)

2010-07-02

... cubic yards of beach-quality sediment from an offshore borrow source, and deposit the material along... dredging operations and discharge the sand on the beach via submerged pipeline. The applicant's proposed borrow areas include sites identified as having beach quality material in the U.S. Army Corps of...

Indirect Effects and Potential Cumulative Impacts of Dredging in an Urbanized Estuary

Science.gov (United States)

Sommerfield, C. K.; Chen, J.; Ralston, D. K.; Geyer, W. R.

2016-02-01

For over two centuries, the Delaware River and Bay estuary has supported one of the most economically important ports in the United States. To accommodate ships of ever-increasing size, the 165-km axial shipping channel has been deepened to over twice the natural depth of the estuary. While it is known that the channel has modified tides and sedimentation patterns in the estuary, unknown are the impacts on the ecosystem as a whole. A concern is the influence of channelization on sediment movement to the tidal wetland coast, which is eroding at rates on the order of meters per year. Tidal wetlands frame the entire estuary and provide vital ecosystem services ranging from recreation to carbon sequestration. To identify shifts in baseline conditions, we are performing a retrospective analysis of estuarine dynamics using historical bathymetry, numerical modeling, and observational studies. The period of interest extends from 1848 (50 years prior to channel construction) to present. During this period the channel was progressively deepened from its natural depth of 5.5 m to the current depth of 14 m. Preliminary modeling results support independent evidence that the salt intrusion and zone of rapid sediment deposition migrated several 10s of kilometers up-estuary as an indirect effect of deepening. Ironically, the locus of intense deposition now falls squarely within the Wilmington-Philadelphia port complex; river sediment that initially settles in this area is removed by maintenance dredging before it can disperse seaward. Sediment budgetary analysis indicates that the mass of sediment dredged from the upper estuary on average exceeds the mass of the new sediment supplied from the drainage basin. Hence, a probable cumulative impact of dredging is a reduction in sediment delivery to the lower estuary and fringing wetlands. Connections among the shipping channel, wave-tide interactions, and marsh edge erosion are a topic of ongoing modeling and observational research.

Investigation of sediment transport and optimization of dredging operations in Indian ports using radiotracer technique

International Nuclear Information System (INIS)

Pant, H.J.

2012-01-01

India has a long coastline of about 7,515 km and there are twelve major ports situated on the coastline. Out of them, six are situated on the West Coast whereas other six are situated on the East Coast. In addition to this, there are more than 140 minor ports and other marine establishments situated along the coastline. Each port and marine project has a navigation channel and depth of this navigation channel needs to be maintained to a level of at least 12-15 meters for smooth sailing of ships. Sediments continuously move along the coast due to alongshore currents generated by the waves and tides; and get deposited in navigation channels. For maintaining the required depth of the channels, the dredging operation is carried out. throughout the year or as and when required. Development of a new port or harbour also involves huge capital dredging. The dredged sediments generated during maintenance or capital dredging needs to be dumped at a suitable location, so that it does not find its way back to the channel and obstruct sailing of ships. Moreover the selected site should be such that the turn around time of the dredger is kept minimum to economize the dredging operation. In order to meet the above requirements, the knowledge of transport parameters such as the general direction of movement, extent of lateral and longitudinal movement, transport velocity, transport thickness and bed load movement rate is required. Radiotracer techniques are commonly used to investigate sediment transport on seabed and evaluate the suitability of the proposed dumping sites. Scandium-46 (half-life: 84 days, Gamma energies: 0.89 MeV (100%), 1.12 MeV (100%)) in the form of scandium glass powder is the most suitable radiotracer for tracing sediments on seabed. The activity used in an investigation ranges from 75-300 GBq (2-8 Ci). The suitably prepared particulate radiotracer is injected on seabed at the proposed site using a specially designed injection system and its movement is

Ecological evaluation of proposed dredged material from Richmond Harbor Deepening Project and the intensive study of the Turning Basin

Energy Technology Data Exchange (ETDEWEB)

Pinza, M.R.; Mayhew, H.L.; Karle, L.M.; Kohn, N.P.; White, P.J.; Word, J.Q.; Michaels, L.L. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1995-06-01

Richmond Harbor is on the eastern shoreline of central San Francisco Bay and its access channels and several of the shipping berths are no longer wide or deep enough to accommodate modem deeper-draft vessels. The Water Resources Development Act of 1986 (PL99-662) authorized the US Army Corps of Engineers (USACE), San Francisco District to deepen and widen the navigation channels in Richmond Harbor. Several options for disposal of the material from this dredging project are under consideration by USACE: disposal within San Francisco Bay, at open-ocean disposal sites, or at uplands disposal sites. Purpose of this study was to conduct comprehensive evaluations, including chemical, biological, and bioaccumulation testing of sediments in selected areas of Richmond Harbor. This information was required by the Environmental Protection Agency (EPA) and USACE. Battelle/Marine Sciences Laboratory collected 20 core samples, both 4-in. and 12-in., to a project depth of -40 ft mean lower low water (MLLW) (-38 ft MLLW plus 2 ft of overdepth) using a vibratory-hammer core. These 20 field samples were combined to form five test composites plus an older bay mud (OBM) composite that were analyzed for physical/chemical parameters, biological toxicity, and tissue chemistry. Solid-phase tests were conducted with the amphipod, Rhepoxynius abronius; the clam, Macoma nasuta; and the polychaete worm, Nephtys caecoides. Suspended-particulate-phase (SPP) tests were conducted with the sanddab, Citharichthys stigmaeus; the mysid, Holmesimysis costata; and the bivalve, Mytilus galloprovincialis. Bioaccumulation of contaminants was measured in tissues of Macoma nasuta and Nereis virens. Sediments from one ocean reference sediment, and two in-bay reference sediments, were tested concurrently. Results from analysis of the five test treatments were statistically compared with the reference sediment R-OS in the first five sections of this report.

Monitoring the effects of disposal of fine sediments from maintenance dredging on suspended particulate matter concentration in the Belgian nearshore area

OpenAIRE

Fettweis, M.; Baeye, M.; Francken, F.; Lauwaert, B.; Van den Eynde, D.; Van Lancker, V.; Martens, C.; Michielsen, T.

2012-01-01

The impact of continuous disposal of fine-grained sediments from maintenance dredging works on the suspended particulate matter concentration in a shallow nearshore turbidity maximum was investigated during dredging experiment (port of Zeebrugge, southern North Sea). Before, during and after the experiment monitoring of SPM concentration using OBS and ADV altimetry was carried out at a location 5 km west of the disposal site. A statistical analysis, based on the concept of populations and sub...

Characterization of Underwater Sounds Produced by a Backhoe Dredge Excavating Rock and Gravel

Science.gov (United States)

2012-12-01

bathymetry, hydrodynamic conditions, prevalence of non-dredging ambient sounds), this study fills important knowledge gaps that contribute to better... Beaver Mackenzie, peak spectral levels were 122 dB at 190 m with a peak frequency of 120 Hz. Received levels in the 20- to 1000-Hz band were 133 dB

Morphological Analyses and Simulated Flood Elevations in a Watershed with Dredged and Leveed Stream Channels, Wheeling Creek, Eastern Ohio

Science.gov (United States)

Sherwood, James M.; Huitger, Carrie A.; Ebner, Andrew D.; Koltun, G.F.

2008-01-01

The USGS, in cooperation with the Ohio Emergency Management Agency, conducted a study in the Wheeling Creek Basin to (1) evaluate and contrast land-cover characteristics from 2001 with characteristics from 1979 and 1992; (2) compare current streambed elevation, slope, and geometry with conditions present in the late 1980s; (3) look for evidence of channel filling and over widening in selected undredged reaches; (4) estimate flood elevations for existing conditions in both undredged and previously dredged reaches; (5) evaluate the height of the levees required to contain floods with selected recurrence intervals in previously dredged reaches; and (6) estimate flood elevations for several hypothetical dredging and streambed aggradation scenarios in undredged reaches. The amount of barren land in the Wheeling Creek watershed has decreased from 20 to 1 percent of the basin area based on land-cover characteristics from 1979 and 2001. Barren lands appear to have been converted primarily to pasture, presumably as a result of surface-mine reclamation. Croplands also decreased from 13 to 8 percent of the basin area. The combined decrease in barren lands and croplands is approximately offset by the increase in pasture. Stream-channel surveys conducted in 1987 and again in 2006 at 21 sites in four previously dredged reaches of Wheeling Creek indicate little change in the elevation, slope, and geometry of the channel at most sites. The mean change in width-averaged bed and thalweg elevations for the 21 cross sections was 0.1 feet. Bankfull widths, mean depths, and cross-sectional areas measured at 12 sites in undredged reaches were compared to estimates determined from regional equations. The mean percentage difference between measured and estimated bankfull widths was -0.2 percent, suggesting that bankfull widths in the Wheeling Creek Basin are generally about the same as regional averages for undisturbed basins of identical drainage area. For bankfull mean depth and cross

Effect of cement dosage and early curing towards Kuala Perlis dredged marine sediments: a ɛv - σv and SEM-EDX approach

Science.gov (United States)

Syakeera Nordin, Nurul; Chan, Chee-Ming

2017-11-01

Cement is the primary material used in solidifying the soft soils. This material was applied in solidifying Kuala Perlis dredged marine sediments (DMS). These unwanted sediments are classified as high plasticity silt, MH with 3.36 LL of wc/LL value. At dosage 10 and 20 % of cemented-DMS and 3 days curing time, compression curve results shows the settlement criteria were enhanced than the natural DMS. Unfortunately, the settlement criteria are not complies with the permissible settlement limit and applicable pressure. The formation of cementing compounds appears in the SEM micrograph for 10 and 20 % of cemented-DMS. EDX analysis shows the Ca:Si ratio were increased for cemented-DMS due to the formation of C-S-H gel.

Sediment and turbidity associated with offshore dredging increase coral disease prevalence on nearby reefs.

Science.gov (United States)

Pollock, F Joseph; Lamb, Joleah B; Field, Stuart N; Heron, Scott F; Schaffelke, Britta; Shedrawi, George; Bourne, David G; Willis, Bette L

2014-01-01

In recent decades, coral reef ecosystems have declined to the extent that reefs are now threatened globally. While many water quality parameters have been proposed to contribute to reef declines, little evidence exists conclusively linking specific water quality parameters with increased disease prevalence in situ. Here we report evidence from in situ coral health surveys confirming that chronic exposure to dredging-associated sediment plumes significantly increase the prevalence of white syndromes, a devastating group of globally important coral diseases. Coral health surveys were conducted along a dredging-associated sediment plume gradient to assess the relationship between sedimentation, turbidity and coral health. Reefs exposed to the highest number of days under the sediment plume (296 to 347 days) had two-fold higher levels of disease, largely driven by a 2.5-fold increase in white syndromes, and a six-fold increase in other signs of compromised coral health relative to reefs with little or no plume exposure (0 to 9 days). Multivariate modeling and ordination incorporating sediment exposure level, coral community composition and cover, predation and multiple thermal stress indices provided further confirmation that sediment plume exposure level was the main driver of elevated disease and other compromised coral health indicators. This study provides the first evidence linking dredging-associated sedimentation and turbidity with elevated coral disease prevalence in situ. Our results may help to explain observed increases in global coral disease prevalence in recent decades and suggest that minimizing sedimentation and turbidity associated with coastal development will provide an important management tool for controlling coral disease epizootics.

Controlling toxic cyanobacteria: Effects of dredging and phosphorus-binding clay on cyanobacteria and microcystins

NARCIS (Netherlands)

Lürling, M.; Faassen, E.J.

2012-01-01

Sediment dredging and Phoslock® addition were applied individually and in combination in an enclosure experiment in a Dutch hypertrophic urban pond. These measures were applied to control eutrophication and reduce the risk of exposure to cyanobacterial toxins. Over the 58 days course of the

Chemotoxic materials in a final repository for high-level radioactive wastes. CHEMOTOX concept for defence in depth concerning ground water protection from chemotoxic materials in a final high-level waste repository

International Nuclear Information System (INIS)

Alt, Stefan; Sailer, Michael; Schmidt, Gerhard; Herbert, Horst-Juergen; Krone, Juergen; Tholen, Marion

2009-01-01

The disposal of high-level radioactive wastes in a final repository includes chemotoxic materials. The chemotoxic materials are either part of the radioactive material or part of the packaging material, or the structures within the repository. In the frame of the licensing procedure it has to be demonstrated that no hazardous pollution of the ground water or other disadvantageous changes can occur. The report describes the common project of the Oeko-Institut e.V., the DBE Technology GmbH and the GRS mbH concerning the possible demonstration of a systematic protection of the groundwater against chemotoxic materials in case of a final high-level-radioactive waste repository in the host materials salt and clay stone.

Influence of Water Content on the Flow Consistency of Dredged Marine Soils

Directory of Open Access Journals (Sweden)

Rosman M. Z.

2016-01-01

Full Text Available In present time, dredged marine soils (DMS are generally considered as geo-waste in Malaysia. It is also known to contain high value of water and low shear strength. Lightly solidified soils such as soilcement slurry and flowable fill are known as controlled low strength materials (CLSM. On site, the CLSM was tested for its consistency by using an open-ended cylinder pipe. The vertical and lateral displacement from the test would determine the quality and workability of the CLSM. In this study, manufactured kaolin powder was mixed with different percentages of water. Cement was also added to compare the natural soil with solidified soil samples. There are two methods of flowability test used, namely the conventional lift method and innovative drop method. The lateral displacement or soil spread diameter values were recorded and averaged. Tests showed that the soil spread diameter corresponded almost linear with the increasing amount of water. The binder-added samples show no significant difference with non-binder sample. Also, the mixing water content and percentage of fines had influenced the soil spread diameter.

[Pollution distribution and potential ecological risk assessment of heavy metals in sediments from the different eastern dredging regions of Lake Taihu].

Science.gov (United States)

Mao, Zhi-Gang; Gu, Xiao-Hong; Lu, Xiao-Ming; Zeng, Qing-Fei; Gu, Xian-Kun; Li, Xu-Guang

2014-01-01

In order to investigate the distribution characteristics of nutrients and heavy metals in sediments from different eastern dredging regions of Lake Taihu, the surface and core sediment samples at 5 sites (in East Taihu Lake and Xukou Bay) were collected in 2012. Contents of nutrients (TOC, TN and TP) and heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn) in the sediments were measured and the pollution degrees of heavy metals were evaluated with the potential ecological risk method. The results showed that the heavy metal contents in Xukou Bay were generally higher than those in East Taihu Lake, whereas the nutrients contents showed the reverse trend. There were significant differences between the phytoplankton-dominated and culture lake regions. The concentrations of both nutrients and heavy metals decreased with increasing profile depth. Moreover, the contents of nutrients and heavy metals in the sediments of all dredged areas were lower than those in the un-dredged areas, suggesting that dredging may be a useful approach for decreasing nutrients and heavy metals loading in sediments, but its effectiveness decreased with time. Significant positive correlations were found among different heavy metals and nutrients, indicating that they were from the same pollution source. The Hakanson potential ecological risk index was applied for assessing the status of sediment heavy metal enrichment and the result indicated that sediment dredging could reduce the extent of potential ecological risk. The risk index in different sites followed the order: X1 > D1 > D3 > X2 > D2, while the risk index in site X1 of Xukou Bay was higher than that in site D1 of East Taihu Lake. And the comprehensive ecological risk grades in sites X1 and D1 were in the moderate range, while the sites D2, D3 and X2 were low.

Keeping ports accessible: Brazil is saving “millions” in dredging costs thanks to nuclear techniques

International Nuclear Information System (INIS)

Quevenco, Rodolfo

2015-01-01

With a coastline of over 8500 kilometres, 90 per cent of Brazil’s total exports and imports pass through its ports. Many of the country’s major ports and harbours were built over 100 years ago. Keeping shipping lanes open and enabling these ports to accommodate larger vessels with ever bigger loads requires constant dredging, often at high cost. Over the years, the use of nuclear techniques to study sediment build-up and transport across major ports and harbours (see box) has saved Brazil millions of dollars in dredging costs, said Jefferson Vianna Bandeira, a senior researcher in the Environment Department of the National Nuclear Energy Commission of Brazil. With IAEA assistance, Bandeira and a team of scientists have been using radiotracers to map sediment movements that affect Brazil’s major ports since the 1960s.

77 FR 25717 - Proposed Issuance of a General NPDES Permit for Small Suction Dredging

Science.gov (United States)

2012-05-01

...) General Permit (IDG-37-0000) to placer mining operations in Idaho for small suction dredges (intake nozzle... ENVIRONMENTAL PROTECTION AGENCY [FRL-9666-1] Proposed Issuance of a General NPDES Permit for Small... certifies ``will not, if promulgated, have a significant economic impact on a substantial number of small...

Phytoremediation as a management option for contaminated sediments in tidal marshes, flood control areas and dredged sediment landfill sites.

Science.gov (United States)

Bert, Valérie; Seuntjens, Piet; Dejonghe, Winnie; Lacherez, Sophie; Thuy, Hoang Thi Thanh; Vandecasteele, Bart

2009-11-01

Polluted sediments in rivers may be transported by the river to the sea, spread over river banks and tidal marshes or managed, i.e. actively dredged and disposed of on land. Once sedimented on tidal marshes, alluvial areas or control flood areas, the polluted sediments enter semi-terrestrial ecosystems or agro-ecosystems and may pose a risk. Disposal of polluted dredged sediments on land may also lead to certain risks. Up to a few years ago, contaminated dredged sediments were placed in confined disposal facilities. The European policy encourages sediment valorisation and this will be a technological challenge for the near future. Currently, contaminated dredged sediments are often not valorisable due to their high content of contaminants and their consequent hazardous properties. In addition, it is generally admitted that treatment and re-use of heavily contaminated dredged sediments is not a cost-effective alternative to confined disposal. For contaminated sediments and associated disposal facilities used in the past, a realistic, low cost, safe, ecologically sound and sustainable management option is required. In this context, phytoremediation is proposed in the literature as a management option. The aim of this paper is to review the current knowledge on management, (phyto)remediation and associated risks in the particular case of sediments contaminated with organic and inorganic pollutants. This paper deals with the following features: (1) management and remediation of contaminated sediments and associated risk assessment; (2) management options for ecosystems on polluted sediments, based on phytoremediation of contaminated sediments with focus on phytoextraction, phytostabilisation and phytoremediation of organic pollutants and (3) microbial and mycorrhizal processes occurring in contaminated sediments during phytoremediation. In this review, an overview is given of phytoremediation as a management option for semi-terrestrial and terrestrial ecosystems

Heavy Metal Uptake, Translocation, and Bioaccumulation Studies of Triticum aestivum Cultivated in Contaminated Dredged Materials

Directory of Open Access Journals (Sweden)

Gregorio Begonia

2005-08-01

Full Text Available Phytoremediation is a technology that uses vegetation to remediate contaminants from water, soil, and sediments. Unlike traditional remediation techniques such as soil washing or vitrification, phytoremediation offers a technology that is solar-driven, aesthetically pleasing, and cost effective. Recent studies indicate that winter wheat (Triticum aestivum L. is a potential accumulator for heavy metals such as lead (Pb and cadmium (Cd in hydroponic systems. Based on these findings, a laboratory study was conducted with the primary objective of determining the phytoaccumulation capability of this plant species for heavy metals from contaminated dredged materials (DMs originating from two confined disposal facilities (CDF. The United States Army Corps of Engineers (USACE manages several hundred million cubic meters of DMs each year, and 5 to 10 % of these DMs require special handling because they are contaminated with hazardous substances that can move from the substrates into food webs causing unacceptable risk outside CDFs. Phytoremediation may offer an alternative to decrease this risk. Chemical analyses by USACE personnel identified 17 metals in various DMs, but in this present study, only zinc (Zn and Cd were investigated. Pre-germinated seeds of the test plants were planted under laboratory conditions in pots containing the various DMs and reference soil. Four weeks after planting, plants were harvested and separated into roots and shoots for biomass production and tissue metal concentrations analyses. Results showed that T. aestivum plants have the capacity to tolerate and grow in multiple-metal contaminated DMs with the potential of accumulating various amounts of Zn and Cd. Root and shoot biomass of T. aestivum were not significantly affected by the DMs on which the plants were grown suggesting that this plant species can grow just as well on DMs contaminated by various metals as in the reference soil. No significant differences in the Zn

Metal availability in a highly contaminated, dredged-sediment disposal site: field measurements and geochemical modeling.

Science.gov (United States)

Lions, Julie; Guérin, Valérie; Bataillard, Philippe; van der Lee, Jan; Laboudigue, Agnès

2010-09-01

Two complementary approaches were used to characterize arsenic and metal mobilizations from a dredged-sediment disposal site: a detailed field study combined with hydrogeochemical modeling. Contaminants in sediments were found to be mainly present as sulfides subject to oxidation. Secondary phases (carbonates, sulfates, (hydr)oxides) were also observed. Oxidative processes occurred at different rates depending on physicochemical conditions and contaminant contents in the sediment. Two distinct areas were identified on the site, each corresponding to a specific contaminant mobility behavior. In a reducing area, Fe and As were highly soluble and illustrated anoxic behavior. In well-oxygenated material, groundwater was highly contaminated in Zn, Cd and Pb. A third zone in which sediments and groundwater were less contaminated was also characterized. This study enabled us to prioritize remediation work, which should aim to limit infiltration and long-term environmental impact. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Application of Dredged Materials and Steelmaking Slag as Basal Media to Restore and Create Seagrass Beds: Mesocosm and Core Incubation Experiments

Science.gov (United States)

Tsukasaki, A.; Suzumura, M.; Tsurushima, N.; Nakazato, T.; Huang, Y.; Tanimoto, T.; Yamada, N.; Nishijima, W.

2016-02-01

Seagrass beds stabilize bottom sediments, improve water quality and light conditions, enhance species diversity, and provide habitat complexity in coastal marine environments. Seagrass beds are now experiencing worldwide decline by rapid environmental changes. Possible options of seagrass bed restoration are civil engineering works including mounding to raise the bottom to elevations with suitable light for seagrass growth. Reuse or recycling of dredged materials (DM) and various industrial by-products including steelmaking slags is a beneficial option to restore and create seagrass beds. To evaluate the applicability of DM and dephosphorization slag (Slag) as basal media of seagrass beds, we carried out mesocosm experiments and core incubation experiments in a land-based flow-through seawater tank over a year. During the mesocosm experiment, no difference was found in growth of eelgrass (Zostera marina L.) and macrobenthic community structures between Slag-based sediments and sand-based control experiments, even though Slag-based sediments exhibited substantially higher pH than sand-based sediments. During the core incubation experiment, we investigated detailed variation and distributions of pH and nutrients, and diffusion fluxes of nutrients between the sediment/seawater interface. Though addition of Slag induced high pH up to 10.7 in deep layers (sediments, whereas dissolved phosphate concentration was substantially reduced by the addition of Slag. The low concentrations of phosphate was likely due to precipitation with calcium under high pH condition. Diffusion fluxes of nutrients from the cores were comparable with those reported in natural coastal systems. It was suggested that the mixture of Slag and DM is applicable as basal media for construction of artificial seagrass beds.

76 FR 63547 - Security Zone; Columbia and Willamette Rivers, Dredge Vessels Patriot and Liberty

Science.gov (United States)

2011-10-13

... or his designated representative. The security zone will be in effect while the Dredge Vessels are... its effects on them and participate in the rulemaking process. Small businesses may send comments on... requirements. (c) Enforcement period. The security zone created by this section will be in effect from 7 a.m...

Investigation of the radiological impact due to the dredging of sediments in the Minimes harbour of La Rochelle. Workers and population exposure to reinforced natural radioactivity

International Nuclear Information System (INIS)

2010-01-01

As the city of La Rochelle is implementing a project of expansion of the Minimes yachting harbour which comprises the dredging of sediments (which may have been polluted by a rare earth production plant), this document reports the assessment of the radiological impact of this dredging activity on workers and on the population. A campaign of sediment coring has been performed in order to validate the reference coring station selection, to measure sand radiological activity and to measure the activity of the sediments to be dredged. The computed maximum efficient doses for the workers and for the population appear to be low, and very much less to the 1 mSv/year threshold

Impact on a fish assemblage of the maintenance dredging of a navigation channel in a tropical coastal ecosystem

Directory of Open Access Journals (Sweden)

Demarques Ribeiro da Silva Junior

2012-03-01

Full Text Available Dredging and dredge-spoil disposal are among the major problems in coastal management. Many of the scientific contributions concerning the impacts of this practice are based on the study of sessile organisms and subtropical environments. We evaluated changes in the composition and abundance of a fish assemblage resulting from dredging and sediment disposal at the mouth and in the adjacent waters of the Caravelas River on the north-eastern coast of Brazil. Samples were collected in two directly impacted and three adjacent areas. Differences among stations were not significant, but the dredged site had the least diverse station, as expected. The stations farthest from the directly impacted areas apparently were not influenced by the coastal work, thus suggesting localised effects. The contribution of the present study is particularly important because of the study area's proximity to others that have high conservation value such as mangrove forests and coral reefs, and the relevance of the subject given the continuing dredging activity.A dragagem e descarte de sedimento se destacam como atividades que geram grandes distúrbios aos ecossistemas marinhos e, consequentemente tornam-se um desafio ao manejo e ordenamento costeiro. Grande parte dos estudos que abordam seus impactos é baseada em pesquisas com organismos sésseis e em ambientes temperados, criando uma lacuna no entendimento de seus efeitos sobre a ictiofauna, principalmente nas regiões tropicais. No presente estudo foram avaliadas as alterações na composição e abundância da comunidade de peixes sob influência da dragagem e descarte de sedimento na foz do Rio Caravelas, costa da região Nordeste do Brasil. As amostras foram obtidas em duas estações diretamente afetadas e em três outras áreas adjacentes. Não houve diferença significativa na diversidade média obtida para cada estação, porém a estação correspondente à área dragada apresentou o menor valor dentre as

Combining trace elements micro-analysis in deposited dredged sediments: EPMA and μ-XRF analysis

International Nuclear Information System (INIS)

Poitevin, A; Lerouge, C; Wille, G; Bataillard, P; Quinn, P; Hennet, L

2012-01-01

Since deposited dredged sediments are rich in metallic contaminants, they present a risk for environment. This work aims to study dredged sediments chemical composition, identify metal-carrier minerals and understand their mobility. Combining chemical and spectroscopic techniques at multi-scale for an integrative approach of trace elements (zinc, lead, iron) behaviour is therefore necessary. The global mineralogy and the chemistry of the sediment were determined by X-ray diffraction and fluorescence (XRF), respectively. Zn and Pb enriched fractions were separated using a sequential chemical extraction procedure and measured by inductively coupled plasma atomic emission and mass spectroscopy. Microanalyses using scanning electron microscopy (SEM), electron microprobe microanalysis (EPMA), combined with synchrotron radiation X-ray fluorescence (μ-XRF) were carried out to characterize mineralogical phases and identify Zn and Pb carrier minerals. Iron oxyhydroxides and iron sulphides were consistently identify as Zn and Pb carriers. The assumption that carbonate fraction was the major Zn carried phase, as demonstrated by chemical extraction results, was not verified by EPMA or μ-XRF.

Changing contaminant mobility in a dredged canal sediment during a three-year phytoremediation trial

International Nuclear Information System (INIS)

King, Rosalind F.; Royle, Anna; Putwain, Philip D.; Dickinson, Nicholas M.

2006-01-01

Metal mobility and degradation of organic pollutants were investigated in a contaminated canal sediment in NW England. Sediment was dredged and exposed above the water surface, planted with multiple taxa of Salix, Populus and Alnus and monitored over 32 months. Short-term metal fractionation and phytotoxicity during sediment oxidation were also evaluated in separate laboratory studies. Zinc and Pb redistributed into more mobile fractions, which increased toxicity of the sediment to plants in the laboratory. In contrast, at the canal site, mobility of most elements decreased and total concentrations of Zn, Pb, Cu and Cd fell. Petroleum hydrocarbon concentrations decreased, but the tree-planted treatments appeared less effective at reducing PAH concentrations than treatments colonised by invasive plants. Tree survivorship decreased over time, suggesting increasing phytotoxicity of the exposed sediment in the longer term. Trees provided little benefit in terms of sediment remediation. Options for future management of the sediment are evaluated. - Highly mobilised and toxic metals in a dredged canal sediment provided unexpected responses in a phytoremediation trial

Assessment of sediment quality in dredged and undredged areas of the Trenton Channel of the Detroit River, Michigan USA, using the sediment quality triad

Science.gov (United States)

Besser, John M.; Giesy, John P.; Kubitz, Jody A.; Verbrugge, David A.; Coon, Thomas G.; Braselton, W. Emmett

1996-01-01

The “sediment quality triad” approach was used to assess the effects of dredging on the sediment quality of a new marina in the Trenton Channel of the Detroit River, and to evaluate spatial and temporal variation in sediment quality in the Trenton Channel. Samples were collected in November of 1993 (10 months after dredging) and characterized by chemical analysis, sediment bioassays, and assessment of benthic invertebrate communities. The three study components indicated little difference in sediment quality at dredged sites in the marina relative to nearby areas in the Trenton Channel, and little change in sediment quality of Trenton Channel sites relative to conditions reported in the mid-1980s. These results suggest that improvement in sediment quality in the Trenton Channel, due to dredging or natural processes, will depend on elimination of sediment “hot spots” and other upstream contaminant sources. Concentrations of chemical contaminants, especially metals and polycyclic aromatic hydrocarbons, exceeded concentrations associated with effects on biota and were significantly correlated with results of sediment bioassays and characteristics of benthic communities. Laboratory sediment bioassays with Hyalella azteca andChironomus tentans produced better discrimination among sites with differing degrees of contamination than did characterization of benthic communities, which were dominated by oligochaetes at all sites in the marina and the Trenton Channel.

Bodems voor vrijloopstallen = Bedding materials in loose housing systems for dairy cattle

NARCIS (Netherlands)

Dooren, van H.J.C.; Galama, P.J.; Smits, M.C.J.

2012-01-01

Sand, Compost and 'toemaak' (a mixture of reed, dredge and manure) had been used as bedding material for loose housing systems on three dairy research farms of Wageningen UR Livestock Research. Gaseous emissions, animal behavior and health and food safety aspects were measured and reported together

The impact of dredge-fill on Posidonia oceanica seagrass meadows: regression and patterns of recovery.

Science.gov (United States)

Badalamenti, Fabio; Alagna, Adriana; D'Anna, Giovanni; Terlizzi, Antonio; Di Carlo, Giuseppe

2011-03-01

Posidonia oceanica meadows can be severely damaged by dredge-fill operations. We report on the construction of gas pipelines that occurred between 1981 and 1993 in SW Sicily, Italy. A large portion of the meadow was mechanically removed, and the excavated trench was filled with a mosaic of substrates, ranging from sand to consolidated rock debris. Meadow loss and recovery were quantified over 7 years after the end of operations. We recorded an overall loss of 81.20 ha of meadow. Substrate strongly affected recovery as the percent cover by P. oceanica consistently increased on calcareous rubble, reaching values of 44.37 ± 3.05% in shallow sites after 7 years, whereas no significant increase occurred on other substrates. As in the Mediterranean Sea exploitation of coastal areas continues to grow with consequent impacts on P. oceanica meadows, this case study illustrates how artificial rubble-like materials could be employed to support the restoration of damaged meadows. Copyright © 2010 Elsevier Ltd. All rights reserved.

Monitoring the effects of disposal of fine sediments from maintenance dredging on suspended particulate matter concentration in the Belgian nearshore area (southern North Sea)

OpenAIRE

Fettweis, M.; Baeye, M.; Francken, F.; Lauwaert, B.; Van den Eynde, D.; Van Lancker, V.; Martens, C.; Michielsen, T.

2011-01-01

The impact of continuous disposal of fine-grained sediments from maintenance dredging works on the suspended particulate matter concentration in a shallow nearshore turbidity maximum was investigated during dredging experiment (port of Zeebrugge, southern North Sea). Before, during and after the experiment monitoring of SPM concentration using OBS and ADV altimetry was carried out at a location 5 km west of the disposal site. A statistical analysis, based on the concept of populations and sub...

Dredging in the Spratly Islands: Gaining Land but Losing Reefs.

Science.gov (United States)

Mora, Camilo; Caldwell, Iain R; Birkeland, Charles; McManus, John W

2016-03-01

Coral reefs on remote islands and atolls are less exposed to direct human stressors but are becoming increasingly vulnerable because of their development for geopolitical and military purposes. Here we document dredging and filling activities by countries in the South China Sea, where building new islands and channels on atolls is leading to considerable losses of, and perhaps irreversible damages to, unique coral reef ecosystems. Preventing similar damage across other reefs in the region necessitates the urgent development of cooperative management of disputed territories in the South China Sea. We suggest using the Antarctic Treaty as a positive precedent for such international cooperation.

Dredging of blue mussels ( Mytilus edulis L.) in a Danish sound: stock sizes and fishery-effects on mussel population dynamic

DEFF Research Database (Denmark)

Dolmer, Per; Kristensen, Per Sand; Hoffmann, Erik

1999-01-01

In April 1993, 1994 and 1995 the abundance of blue mussels, Mytilus edulis L., was estimated in Limfjorden, Denmark. The stocks were assessed by using a down-scaled model of a commercial mussel dredge which efficiency was analysed by comparing its samples with others collected by diver. The mean...... dredge efficiency was 17%. The fishing area in Limfjorden (700 km(2)) is divided into 22 fishery zones and mussel stock size was calculated for each zone. From April 1993 to April 1994 the total stock size declined from 771 000 to 616 000 t. In the same period, the exploitation rate in the fishery was 14...

Dredging of sand from a creek adjacent to a sand-spit for reclamation: Its impact on spit stability and coastal zone

Digital Repository Service at National Institute of Oceanography (India)

Rajagopal, M.D.; Vethamony, P.; Ilangovan, D.; Jayakumar, S.; Sudheesh, K.; Murty, K.S.R.

model to understand the flow pattern when the bathymetry is altered for dredging and (ii) GALENA to analyse the slope stability. 2. Coastal Environment of the Study Area Off Paradip, currents are of the order of 50–90 cm/s during southwest monsoon.... Assuming an average sedimentation depth of 0.5 m for a dredged area of ∼4.22 × 10 6 m 2 ,thematerial accumulated in this region (zone-I) works out to be ∼2.11×10 6 m 3 . Earlier studies proved that the mouth of JMC is a region of divergence...

Digital 3D reconstruction of Betancourt’s historical heritage: the dredging machine in the Port of Kronstadt

Directory of Open Access Journals (Sweden)

José Ignacio Rojas-Sola

2018-01-01

Full Text Available Agustín de Betancourt was one of the most distinguished engineers of the 18th and 19th centuries with numerous contributions to various fields of engineering, including civil engineering. This research shows the process followed in documenting the cultural heritage of this engineer from the Canary Islands (Spain, especially in the geometric documentation of the Kronstadt harbour-dredging machine presented in 1808. The initial information was taken from the Canary Orotava Foundation, History of Science, which has been compiling information on the Betancourt Digital Project for years. In particular, there are only 8 colour illustrations without scale, as well as a small report on the description of the parts and the operation of a dredging machine previously designed for the Port of Venice (but never put into operation. This was the basis for the construction of the dredging machine for the Port of Kronstadt (Russia that did go into operation in 1812 for more than 10 years. From this information, 3D reconstruction was made by means of Computer-Aided Design (CAD techniques thanks to the use of the Autodesk Inventor Professional parametric software, which made it possible to build the 3D model and complete its geometric documentation as well as different detailed plans and exploded views. The results show a reliable approach to its modelling, a process in which several dimensional and operational hypotheses have had to be assumed due to the lack of existing information.

Metal uptake by young trees from dredged brackish sediment : Limitations and possibilities for phytoextraction and phytostabilisation

NARCIS (Netherlands)

Mertens, Jan; Vervaeke, Pieter; de Schrijver, A.; Luyssaert, Sebastiaan

2004-01-01

Five tree species (Acer pseudoplatanus L., Alnus glutinosa L. Gaertn., Fraxinus excelsior L., Populus alba L. and Robinia pseudoacacia L.) were planted on a mound constructed of dredged sediment. The sediment originated from a brackish river mouth and was slightly polluted with heavy metals. This

Sea Dredged Gravel versus Crushed Granite as Coarse Aggregate for Self Compacting Concrete in Aggressive Environment

DEFF Research Database (Denmark)

Sørensen, Eigil V.; Kristensen, Lasse Frølich

2007-01-01

Properties of self compacting concrete (SCC) with two types of coarse aggregate - sea dredged gravel with smooth and rounded particles and crushed granite with rough and angular particles - have been studied. Sea gravel allowed a higher aggregate proportion in the concrete leading to a higher...

To what extend the dam dredging can influence the background level of metals in the Rhine River: using chemical and biological long-term monitoring to answer

Directory of Open Access Journals (Sweden)

Lebrun Jérémie D.

2017-01-01

Full Text Available Dredging generates remobilisation of sediments contaminated by non-degradable compounds such as metals, to which aquatic organisms can be exposed. This study aims at assessing the environmental impact of sediments remobilised in the Rhine River (France during the dredging of Marckolsheim dam by pumping/dilution in 2013 on metal speciation and organisms' exposure. The monitoring coupling chemical and biological tools was performed 2 years before dredging operation on 2 sampling sites, upstream and downstream from the discharge of pumping/dilution, to acquire data on the natural variability of labile (DGT as passive samplers, dissolved and particulate concentrations of Cd, Co, Cr, Cu, Ni, Mn, Pb and Zn in Rhine during full hydrological cycles. In parallel, size-calibrated zebra mussels were transplanted at both sites to monitor continuously metal bioavailability from particulate and dissolved fractions. This long-term monitoring allowed the establishment of reference baselines of Rhine water and mussels' contamination levels and subsequently, the detection of averred environmental changes due to the dredging. Indeed, Co and Mn accumulations in mussels exposed to the discharge were consistent with increasing labile species in Rhine whereas ones of Cr and Pb were likely due to an enhanced particulate bioavailability. Whatever the exposure route, the mussels recovered their basal metal contents 2 weeks after the end of dredging, suggesting a transient impact of sediment remobilisation on bioaccumulation. This long-term monitoring highlights the interest of coupling chemical and biological time-integrated tools for a better assessment of environmental risks because metallic exchanges between organisms and their media are complex and metal-specific.

Uranium series disequilibrium dating of coral and shell fragments dredged around islands and seamounts during the 1986 HMNZS Tui cruises

International Nuclear Information System (INIS)

McCabe, W.J.; Ditchburn, R.G.; Glasby, G.P.

1996-01-01

Nine coral and two shell samples dredged from the flanks of various islands and seamounts in the subtropical SW Pacific were processed through the uranium series analysis system and ages calculated. Although there is a tendency for sample ages to increase with water depth, the presence of corals less than 1000 years old at water depths of 400 to almost 1100 m indicates the influence of recent slumping rather than crustal warping or eustatic changes as reasons for their present position. This phenomenon is related to mass wasting of material down slope. It is possible that samples collected systematically down the slopes of these islands would enable the frequency and times of slumping to be determined. (author). 7 refs., 2 figs., 7 tabs

Application of Long Distance Conveyance (LDC) of Dredged Sediments to Louisiana Coastal Restoration

Science.gov (United States)

2011-01-01

generally use some type of bucket for digging the sediment, then hoist or boom the load to the surface. Most common hydraulic methods use a centrifugal...sediment. The loaded bucket is hoisted to the surface and side dumped into a transportation unit, or into the disposal site. Transportation units are...Conveyance (LDC) of Dredged Sediments to Louisiana Coastal Restoration Timothy Welp Coastal and Hydraulics Laboratory U.S. Army Engineer Research

A Case Study of the Effects of Dredging in Narrgansett Bay (RI, USA) on Winter Flounder Eggs

Science.gov (United States)

Seasonal dredging constraints have been established in several northeastern U.S. estuaries with the intent to protect winter flounder (Pseudopleuronectes americanus). A major source of concern is impacts on demersal eggs due to elevated sedimentation rates during the winter-earl...

Some economic aspects of the conversion of raw materials into final products

Energy Technology Data Exchange (ETDEWEB)

Pick, H J [Univ. of Aston, Birmingham, Eng.; Becker, P E

1978-01-01

In a previous paper Pick and Becker analyzed the direct and indirect relations between energy and the ''physical structure'' materials used by the engineering and construction industries. The present paper provides a more general description of materials conversion from natural resources to final products. The cost of raw materials, only some 30 percent of which come from the developing countries, accounts for a relatively small proportion of final product costs, the remaining product costs arising from the progressive application of labor, capital, energy, etc. Emphasis is placed on the complete interdependence of the inputs to manufacturing; a change in any one having implications for the remainder. Materials substitution, while in principle providing an adaptive mechanism to change, also has implications for a wide range of factors of production and for social and industrial issues such as regional employment, the demand for specific trades and professions, for research and development and for industrial structure and capital investment. Full allowance for this interdependence needs to be an integral part of effective long term policy formulation and of research and development planning.

A field study on phytoremediation of dredged sediment contaminated by heavy metals and nutrients: the impacts of sediment aeration.

Science.gov (United States)

Wu, Juan; Yang, Lihua; Zhong, Fei; Cheng, Shuiping

2014-12-01

Compared to traditional chemical or physical treatments, phytoremediation has proved to be a cost-effective and environmentally sound alternative for remediation of contaminated dredged sediment. A field study was conducted in a sediment disposal site predominantly colonized by Typha angustifolia under different sediment moisture conditions to estimate the phytoremediation effects of dredged sediment. The moisture content was 37.30 % and 48.27 % in aerated and waterlogged sediment, respectively. Total nitrogen (TN) content was higher in the waterlogged sediment than in the aerated sediment. The total Cd contents were lower in aerated sediment, which was mainly resulted from the lower exchangeable fraction of Cd. The bioaccumulation of P, Cu and Pb in T. angustifolia was promoted by waterlogging, and the belowground tissue concentrations and accumulation factors (AFs) of Cu were higher than that of other metals, which can be explained by that Cu is an essential micronutrient for plants. Consistent with many previous studies, T. angustifolia showed higher metal levels in roots than in above-ground tissues at both the sediment conditions. Due to the improved biomass produced in the aerated sediment, the removals of nutrients and the metals by plant harvest were higher from aerated sediment than from waterlogged sediment. It was indicated that maintaining the dredged sediment aerated can avoid release risk and plant uptake of metals, while the opposite management option can promote phytoextraction of these contaminants.

Bibliography on ocean waste disposal. second edition. Final report 1976

International Nuclear Information System (INIS)

Stanley, H.G.; Kaplanek, D.W.

1976-09-01

This research bibliography is restricted to documents relevant to the field of ocean waste disposal. It is primarily limited to recent publications in the categories of: ocean waste disposal; criteria; coastal zone management; monitoring; pollution control; dredge spoil; dredge spoin disposal; industrial waste disposal; radioactive waste; oil spills; bioassay; fisheries resources; ocean incineration; water chemistry; and, Water pollution

Sulfur Mustard Exposure from Dredged Artillery Shell in a Commercial Clammer

Directory of Open Access Journals (Sweden)

Jenna Otter

2017-09-01

Full Text Available A 40-year-old commercial fisherman presented with a blistering second degree burn to the right arm after handling a dredged and undetonated World War I-era sulfur mustard artillery shell. He sustained isolated second degree cutaneous injury requiring wound care and skin grafting. Sulfur mustard, or dichlorethylsulphide, is a vesicant chemical warfare agent that causes significant cutaneous chemical burn and is managed with burn wound care. Long-term effects include cosmetic disfigurement and increased risk of developing cancer. Sulfur mustard exposure is a rare but devastating injury when discarded artillery shells are encountered in coastal waters.

Fate of cadmium in the rhizosphere of Arabidopsis halleri grown in a contaminated dredged sediment

Energy Technology Data Exchange (ETDEWEB)

Huguet, Séphanie, E-mail: huguet.st@gmail.com [ISTerre, Université Grenoble Alpes, CNRS, F-38041 Grenoble (France); Laboratoire de Chimie Analytique Bio-Inorganique et Environnement (LCABIE), Institut des sciences analytiques et de physico-chimie pour l' environnement et les matériaux (IPREM UMR 5254), Université de Pau et des Pays de l' Adour and CNRS, Hélioparc, 2 Av. Pierre Angot, 64053 Pau Cedex 9 (France); INERIS, Parc technologique Alata, 60550 Verneuil-en-Halatte (France); EMDouai, MPE-GCE, 930 Boulevard Lahure, 59500 Douai (France); Isaure, Marie-Pierre [Laboratoire de Chimie Analytique Bio-Inorganique et Environnement (LCABIE), Institut des sciences analytiques et de physico-chimie pour l' environnement et les matériaux (IPREM UMR 5254), Université de Pau et des Pays de l' Adour and CNRS, Hélioparc, 2 Av. Pierre Angot, 64053 Pau Cedex 9 (France); Bert, Valérie [INERIS, Parc technologique Alata, 60550 Verneuil-en-Halatte (France); Laboudigue, Agnès [EMDouai, MPE-GCE, 930 Boulevard Lahure, 59500 Douai (France); Proux, Olivier [OSUG, UMS832 CNRS/UJF, 414 rue de la piscine, 38400 Saint-Martin d' Hères (France); Flank, Anne-Marie; Vantelon, Delphine [Beamline LUCIA, SLS, Swiss Light Source, CH-5232 Villigen (Switzerland); Synchrotron SOLEIL, F-91192 Gif Sur Yvette (France); Sarret, Géraldine, E-mail: geraldine.sarret@ujf-grenoble.fr [ISTerre, Université Grenoble Alpes, CNRS, F-38041 Grenoble (France)

2015-12-01

In regions impacted by mining and smelting activities, dredged sediments are often contaminated with metals. Phytotechnologies could be used for their management, but more knowledge on the speciation of metals in the sediment and on their fate after colonization by plant roots is needed. This work was focused on a dredged sediment from the Scarpe river (North of France), contaminated with Zn and Cd. Zn, Cd hyperaccumulating plants Arabidopsis halleri from metallicolous and non-metallicolous origin were grown on the sediment for five months in a pot experiment. The nature and extent of the modifications in Cd speciation with or without plant were determined by electron microscopy, micro X-ray fluorescence and bulk and micro X-ray absorption spectroscopy. In addition, changes in Cd exchangeable and bioavailable pools were evaluated, and Cd content in leachates was measured. Finally, Cd plant uptake and plant growth parameters were monitored. In the original sediment, Cd was present as a mixed Zn, Cd, Fe sulfide. After five months, although pots still contained reduced sulfur, Cd-bearing sulfides were totally oxidized in vegetated pots, whereas a minor fraction (8%) was still present in non-vegetated ones. Secondary species included Cd bound to O-containing groups of organic matter and Cd phosphates. Cd exchangeability and bioavailability were relatively low and did not increase during changes in Cd speciation, suggesting that Cd released by sulfide oxidation was readily taken up with strong interactions with organic matter and phosphate ligands. Thus, the composition of the sediment, the oxic conditions and the rhizospheric activity (regardless of the plant origin) created favorable conditions for Cd stabilization. However, it should be kept in mind that returning to anoxic conditions may change Cd speciation, so the species formed cannot be considered as stable on the long term. - Highlights: • Cd was present as a mixed Zn, Cd, Fe sulfide in the sediment before

Fate of cadmium in the rhizosphere of Arabidopsis halleri grown in a contaminated dredged sediment

International Nuclear Information System (INIS)

Huguet, Séphanie; Isaure, Marie-Pierre; Bert, Valérie; Laboudigue, Agnès; Proux, Olivier; Flank, Anne-Marie; Vantelon, Delphine; Sarret, Géraldine

2015-01-01

In regions impacted by mining and smelting activities, dredged sediments are often contaminated with metals. Phytotechnologies could be used for their management, but more knowledge on the speciation of metals in the sediment and on their fate after colonization by plant roots is needed. This work was focused on a dredged sediment from the Scarpe river (North of France), contaminated with Zn and Cd. Zn, Cd hyperaccumulating plants Arabidopsis halleri from metallicolous and non-metallicolous origin were grown on the sediment for five months in a pot experiment. The nature and extent of the modifications in Cd speciation with or without plant were determined by electron microscopy, micro X-ray fluorescence and bulk and micro X-ray absorption spectroscopy. In addition, changes in Cd exchangeable and bioavailable pools were evaluated, and Cd content in leachates was measured. Finally, Cd plant uptake and plant growth parameters were monitored. In the original sediment, Cd was present as a mixed Zn, Cd, Fe sulfide. After five months, although pots still contained reduced sulfur, Cd-bearing sulfides were totally oxidized in vegetated pots, whereas a minor fraction (8%) was still present in non-vegetated ones. Secondary species included Cd bound to O-containing groups of organic matter and Cd phosphates. Cd exchangeability and bioavailability were relatively low and did not increase during changes in Cd speciation, suggesting that Cd released by sulfide oxidation was readily taken up with strong interactions with organic matter and phosphate ligands. Thus, the composition of the sediment, the oxic conditions and the rhizospheric activity (regardless of the plant origin) created favorable conditions for Cd stabilization. However, it should be kept in mind that returning to anoxic conditions may change Cd speciation, so the species formed cannot be considered as stable on the long term. - Highlights: • Cd was present as a mixed Zn, Cd, Fe sulfide in the sediment before

[Calculation of environmental dredging depth of heavy sediments in Zhushan Bay of Taihu Lake metal polluted].

Science.gov (United States)

Jiang, Xia; Wang, Wen-Wen; Wang, Shu-Hang; Jin, Xiang-Can

2012-04-01

Horizontal distribution of heavy metals in surface sediments of Zhushan Bay was investigated, and core sediment samples were collected in the representative area. Core sediments were divided into oxide layer (A), polluted layer (B), upper polluted transition layer(C1), lower polluted transition layer(C2) and normal mud layer(D) from top to bottom. The change of total contents of Cr, Ni, Cu, Zn, As, Cd, Hg, Pb and contents of biological available Cr, Ni, Cu, Zn, As, Cd, Pb with depths were analyzed. Ecological risk assessment of heavy metals in sediments was done by potential ecological risk index method. At last, environmental dredging depth was calculated. The results shows that the contents of Cr, Ni, Cu, Zn, As, Cd, Hg, Pb are 30.56-216.58, 24.07-59.95, 16.71-140.30, 84.31-193.43, 3.39-22.30, 0.37-1.59, 0.00-0.80 and 9.67-99.35 mg x kg(-1), respectively. The average concentrations of Cr, Ni, Cu, Zn, As, Cd, Hg, Pb are 79.74, 37.74, 44.83, 122.39, 10.39, 0.77, 0.14 and 40.08 mg x kg(-1), respectively. Heavy metals in the surface sediments of Zhushan Bay mainly distribute in the west bank and the estuaries of Taige canal, Yincun Port, and Huanshan River,and Cd pollution is relatively serious. There is an accumulative effect of heavy metals in Zhushan Bay, and the contents of biological available metals decrease with depths. Ecological risk grades of Cd in layer A and B are high, and the comprehensive potential ecological risk grades of each layer are in middle or low. The environmental dredging layers are A and B, and the average dredging depth is 0.39 m.

Final disposal of the rad waste materials - question of the nuclear energy implementation and application perspectives

International Nuclear Information System (INIS)

Plecas, I.

1995-01-01

Two main problems that are denying and slowing down the development of nuclear energy are safe work of the nuclear power facilities (NEF) and disposal of the radioactive waste materials, produced from the NEF and infrastructure facilities of the nuclear fuel cycle (NFC). Although nowadays worldwide knowledge, based on the 45 year of experiences in handling the radioactive waste materials, do not treat the problems of final disposal of the rad waste materials as a task of the primary importance in NFC, this subject still engage experts from this field of investigations, especially in the countries that developed all aspects of the nuclear fuel cycle. Techniques for final disposal of low and intermediate level rad waste materials, are well known and are in state of implementation. The importance of the fundamental safety principles, implemented in the IAEA documents, concerning handling, treatment and final disposal of the rad waste materials, is presented. Future usage of nuclear energy, taking into account all the facts that are dealing with problems of the rad waste materials produced in the NFC, can be a reality. (author.)

Reducing the impact of blue mussel (Mytilus edulis) dredging on the ecosystem in shallow water soft bottom areas

DEFF Research Database (Denmark)

Frandsen, Rikke; Eigaard, Ole Ritzau; Poulsen, Louise K.

2015-01-01

Dredging blue mussels (Mytilus edulis) and thus removing structural elements, inducing resuspension of sediment as well as reducing filtration capacity, will inevitably affect the ecosystem. The study demonstrates that the impacts of fishing can be reduced through gear developments. A new light d...

Evaluation of heavy metals transfer: impact of a dredged sediment deposit on a on-polluted soil; Migration des polluants metalliques: cas d'un depot de sediments contamines sur un sol non pollue

Energy Technology Data Exchange (ETDEWEB)

Vauleon, C.; Laboudigue, A. [Centre National de Recherche sur les Sites et Sols Pollues, CNRSSP, 59 - Douai (France); Tiffreau, Ch. [CEA Cadarache, 13 - Saint Paul lez Durance (France)

2001-07-01

In many countries and especially in the North of France, inland waterways need to be dredged regularly to provide a high quality environment for customers, staff and local communities. However, dredging operations generate yearly large quantities of sediments, which in spite of their high pollutant contents, are often stored in non-specific sites. Thus, the threat of a spreading contamination for the surrounding environment is important. In order to evaluate this potential risk and to quantify the transfer of heavy metals from the dredged layer to the non-polluted soil below, an interdisciplinary research project was undertaken including, (i) the monitoring of an experimental sediment deposit, (ii) the microscopic study of metal distribution inside this deposit, (iii) the evaluation of microbial activity, (iv) the impact of natural vegetation growth on metal migration. Up to now, the main processes identified (oxidation of sulphur compounds, vertical migration of Zinc) allowed us to make several recommendations for the future management of dredged sediments by: (i) controlling the oxidation processes during dredging operations or (ii) assessing the high neutralizing capacity of the local environment of deposition. Moreover, an adequate vegetation management can reduce the heavy metals migration to groundwater's with maximum efficiency and at low costs. (author)

Water quality of a coastal Louisiana swamp and how dredging is undermining restoration efforts

Science.gov (United States)

Lane, Robert R.; Huang, Haosheng; Day, John W.; Justic, Dubravko; DeLaune, Ronald D.

2015-01-01

The Bayou Boeuf Basin (BBB), a sub-basin of the Barataria Basin estuary in coastal Louisiana, consists of forested and floating wetlands receiving drainage from surrounding agricultural fields and urban watersheds. We characterized surface water quality in the BBB, and determined through hydrologic modeling if a series of levee breaks along major drainage channels would significantly improve water quality by allowing flow into surrounding wetlands. Surface water monitoring found surrounding sugarcane farm fields to be major sources of nutrient and sediment loading. Hydrological modeling indicated that levee breaks would increase N reduction from the current 21.4% to only 29.2%, which is much lower than the anticipated 90-100% removal rate. This was due to several factors, one them being dredging of main drainage channels to such a degree that water levels do not rise much above the surrounding wetland elevation even during severe storms, so only a very small fraction of the stormwater carried in the channel is exposed to wetlands. These unexpected results provide insight into an undoubtedly pervasive problem in human dominated wetland systems; that of decreased flooding during storm events due to channel deepening by dredging activities. Additional water quality management practices should be implemented at the farm field level, prior to water entering major drainage canals.

Harbour dredging in the Townsville region: a cross-evaluation between proxy records in coral skeletons and environmental monitoring records (GBRMPA)

International Nuclear Information System (INIS)

Esslemont, G.

2000-01-01

Full text: The hypothesis tested is whether coral skeletons provide a proxy-record of copper and zinc bio-availability in inner-neritic environments, which corresponds with conventionally obtained records of harbour dredging. Trace metal concentrations in a colony of the massive-branching coral Pocillopora damicornis were measured along two calice walls that grew at a relatively uniform rate of ∼1 mm/year. Each calice wall represented tracking surfaces for the SIMS micro-sampling beam, along which a complete series of measurements were made over two annual cycles, at approximately monthly increments. Measurements were located temporally using annual couplets of high and low density growth-bands, representing 1991-92. Sub-annual resolution was achieved using proxy temperature (Sr/Ca) and salinity records (Ba/Ca) in the coral skeleton, which were related to conventionally obtained GBRMPA records taken nearby. Proxy records of copper and zinc in coral skeletons were related to the 1991 dredging of Townsville Harbour, recorded in detail by GBRMPA. Records include six temporal measurements of labile copper and zinc in fine sediment resuspended by two dredging episodes, resulting in metal-rich sediment plumes (2-3 x background) settling onto reefs fringing Magnetic Island. The P. damicornis colony was obtained from an exposed reef. Both dredging episodes were clearly recorded by the coral skeleton, using copper and zinc tracers measured by the SIMS micro-beam, and sediment-biota accumulation coefficients were derived for these metals. Calibration of the SIMS instrument was achieved from a standard in a pseudo 'coral skeleton' matrix. We attempted to co-precipitate a four point series of multi-metal standards in an aragonite matrix, to provide an external calibration series verified by cross-instrument measurement (AAS). However, metal concentrations were heterogenous at the micron scale, and precise calibration could not be achieved using the SIMS instrument. This

Concurrent monitoring of vessels and water turbidity enhances the strength of evidence in remotely sensed dredging impact assessment

NARCIS (Netherlands)

Wu, G.; Leeuw, de J.; Skidmore, A.K.; Prins, H.H.T.; Liu, Y.

2007-01-01

Remotely sensed assessment of dredging impacts on water turbidity is straightforward when turbidity plumes show up in clear water. However, it is more complicated in turbid waters as the spatial or temporal changes in turbidity might be of natural origin. The plausibility of attributing turbidity

Quantifying Sediment Characteristics and Infilling Rate within a Ship Shoal Dredge Borrow Area, Offshore Louisiana

Science.gov (United States)

Xue, Z.; Wilson, C.; Bentley, S. J.; Xu, K.; Liu, H.; Li, C.; Miner, M. D.

2017-12-01

Barrier islands provide protection to interior wetlands and maintain estuarine gradients. Mississippi River delta plain barrier islands are undergoing rapid disintegration due to high rates of subsidence and a deficit in the coastal sand supply. To mitigate for barrier island land loss, Louisiana has implemented a restoration program that intends to supplement coastal sand deficits by introducing sand from outside of the active coastal system. Inner-shelf shoals offshore Louisiana are one of the only sand resource options containing large volumes of restoration quality sand. Ship Shoal is one of these inner-shelf shoals that was produced by marine reworking of former Mississippi River Delta barrier island sediments during late Holocene time. Though indirect effects to protected areas or infrastructure adjacent to excavations have been considered, there is a paucity of observational data on their evolution. Caminada borrow area, dredged in 2013-2016 for the Caminada Headland Restoration Project, provides a valuable opportunity to validate and improve predictive models for how borrow areas evolve. In July 2017, a subbottom and bathymetric geophysical survey was conducted and sediment cores were collected to test the hypothesis that sedimentation within the excavation is affected by lateral bedload transport after initial rapid infill as slopes equilibrate. Preliminary results show the sediment within the excavation is predominantly very fine sand with isolated mud drapes. These sediments overlay older delta complex muddy strata. This contrasts strongly with other dredge pits outside of shoal areas and closer to shore, which have been infilled largely by advection of fine suspended sediments of fluvial origin. Laboratory work on cores will include laser grain size, x-ray analyses of sedimentary structures, and radiochemistry analyses for rates and age of deposition. With the knowledge of stratigraphy and sediment dynamics surrounding the dredge pit, we can quantify

Effects of sediment application on Nyssa aquatica and Taxodium distichum saplings

Science.gov (United States)

Grandy, Isabel; Messina, Linda; Anemaet, Evelyn R.; Middleton, Beth A.

2018-01-01

The decline of Taxodium distichum forests along the Gulf Coast of North America is partly due to elevation loss and subsequent flooding. In many coastal wetlands, a common approach for coastal restoration is to rebuild elevation through the application of dredge material, but this technique has not been used widely in coastal forests due to concerns of negatively impacting trees. This experiment explored growth responses of Nyssa aquatica and T. distichumsaplings to applications of low salinity dredge material (0.08 ± 0.001 ppt) in a greenhouse setting. Compared to controls, saplings of T. distichum grown in 7 and 15 cm sediment depths had greater final height, and increased stem and total biomass. In contrast, N. aquatica did not respond to sediment application. The absence of a negative response to sediment application in these two species indicates that dredge material application has the potential to improve the ecosystem health of sinking swamp forests by raising their elevation. We recommend that field trials applying sediment additions in coastal forests include careful monitoring of ecosystem responses, including seed bank expression, seedling regeneration, and root and canopy production.

Regional Sediment Management Strategies for the Vicinity of St. Augustine Inlet, St. Johns County, Florida

Science.gov (United States)

2016-07-01

Placement): Hopper dredge can dump in nearshore or use beach pump -out capabilities (if available). Pipeline dredge can dredge from all permitted sources... dump in nearshore or use beach pump -out capabilities (if available). Pipeline dredge can dredge from all permitted sources with direct beach placement...direct pump -out to the beach. Concerns related to overdredging the ebb shoal were lessened since that source would be the final target, providing only

Health risk assessment linked to filling coastal quarries with treated dredged seaport sediments.

Science.gov (United States)

Perrodin, Yves; Donguy, Gilles; Emmanuel, Evens; Winiarski, Thierry

2014-07-01

Dredged seaport sediments raise complex management problems since it is no longer possible to discharge them into the sea. Traditional waste treatments are poorly adapted for these materials in terms of absorbable volumes and cost. In this context, filling quarries with treated sediments appears interesting but its safety regarding human health must be demonstrated. To achieve this, a specific methodology for assessing health risks has been developed and tested on three seaport sediments. This methodology includes the development of a conceptual model of the global scenario studied and the definition of specific protocols for each of its major steps. The approach proposed includes in particular the use of metrological and experimental tools that are new in this context: (i) an experimental lysimeter for characterizing the deposit emissions, and (ii) a geological radar for identifying potential preferential pathways between the sediment deposit and the groundwater. The application of this approach on the three sediments tested for the scenario studied showed the absence of health risk associated with the consumption of groundwater for substances having a "threshold effect" (risk quotient risk for substances having a "non-threshold effect", with the notable exception of arsenic (individual risk equal to 3.10(-6)). Copyright © 2014 Elsevier B.V. All rights reserved.

Digitise this! A quick and easy remote sensing method to monitor the daily extent of dredge plumes.

Directory of Open Access Journals (Sweden)

Richard D Evans

Full Text Available Technological advancements in remote sensing and GIS have improved natural resource managers' abilities to monitor large-scale disturbances. In a time where many processes are heading towards automation, this study has regressed to simple techniques to bridge a gap found in the advancement of technology. The near-daily monitoring of dredge plume extent is common practice using Moderate Resolution Imaging Spectroradiometer (MODIS imagery and associated algorithms to predict the total suspended solids (TSS concentration in the surface waters originating from floods and dredge plumes. Unfortunately, these methods cannot determine the difference between dredge plume and benthic features in shallow, clear water. This case study at Barrow Island, Western Australia, uses hand digitising to demonstrate the ability of human interpretation to determine this difference with a level of confidence and compares the method to contemporary TSS methods. Hand digitising was quick, cheap and required very little training of staff to complete. Results of ANOSIM R statistics show remote sensing derived TSS provided similar spatial results if they were thresholded to at least 3 mg L(-1. However, remote sensing derived TSS consistently provided false-positive readings of shallow benthic features as Plume with a threshold up to TSS of 6 mg L(-1, and began providing false-negatives (excluding actual plume at a threshold as low as 4 mg L(-1. Semi-automated processes that estimate plume concentration and distinguish between plumes and shallow benthic features without the arbitrary nature of human interpretation would be preferred as a plume monitoring method. However, at this stage, the hand digitising method is very useful and is more accurate at determining plume boundaries over shallow benthic features and is accessible to all levels of management with basic training.

Study of materials for use in final deposits of radioactive waste

International Nuclear Information System (INIS)

Amaral, A.F.; Tello, C.C.O.

2011-01-01

Clays are used in repositories (final deposits of radioactive waste) due to their radionuclide sorption and soil waterproofing capacities. The objectives of this work are to research and develop tests of characterization relevant to the use of clays in repositories, to characterize national clays and to assemble a database with information on the suppliers and the tests that were done. Results are shown for the mineral identification test, for the determination of the normal Proctor compaction curve, size distribution, cationic exchange capacity, specific surface, and others, for two materials. Such information will allow the selection of the best among these materials for use in the backfill and in other applications, besides indicating the most reliable test for estimating characteristics of different materials. (author)

Shellfish dredging pushes a flexible avian top predator out of a marine protected area.

Directory of Open Access Journals (Sweden)

Jan A van Gils

2006-11-01

Full Text Available There is a widespread concern about the direct and indirect effects of industrial fisheries; this concern is particularly pertinent for so-called "marine protected areas" (MPAs, which should be safeguarded by national and international law. The intertidal flats of the Dutch Wadden Sea are a State Nature Monument and are protected under the Ramsar convention and the European Union's Habitat and Birds Directives. Until 2004, the Dutch government granted permission for ~75% of the intertidal flats to be exploited by mechanical dredgers for edible cockles (Cerastoderma edule. Here we show that dredged areas belonged to the limited area of intertidal flats that were of sufficient quality for red knots (Calidris canutus islandica, a long-distance migrant molluscivore specialist, to feed. Dredging led to relatively lower settlement rates of cockles and also reduced their quality (ratio of flesh to shell. From 1998 to 2002, red knots increased gizzard mass to compensate for a gradual loss in shellfish quality, but this compensation was not sufficient and led to decreases in local survival. Therefore, the gradual destruction of the necessary intertidal resources explains both the loss of red knots from the Dutch Wadden Sea and the decline of the European wintering population. This study shows that MPAs that do not provide adequate protection from fishing may fail in their conservation objectives.

Final-impression techniques and materials for making complete and removable partial dentures.

Science.gov (United States)

Jayaraman, Srinivasan; Singh, Balendra P; Ramanathan, Balasubramanian; Pazhaniappan Pillai, Murukan; MacDonald, Laura; Kirubakaran, Richard

2018-04-04

Endentulism is relatively common and is often treated with the provision of complete or partial removable dentures. Clinicians make final impressions of complete dentures (CD) and removable partial dentures (RPD) using different techniques and materials. Applying the correct impression technique and material, based on an individual's oral condition, improves the quality of the prosthesis, which may improve quality of life. To assess the effects of different final-impression techniques and materials used to make complete dentures, for retention, stability, comfort, and quality of life in completely edentulous people.To assess the effects of different final-impression techniques and materials used to make removable partial dentures, for stability, comfort, overextension, and quality of life in partially edentulous people. Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 22 November 2017), the Cochrane Central Register of Controlled Trials (CENTRAL) (Cochrane Register of Studies, to 22 November 2017), MEDLINE Ovid (1946 to 22 November 2017), and Embase Ovid (21 December 2015 to 22 November 2017). The US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on language or publication status when searching the electronic databases, however the search of Embase was restricted by date due to the Cochrane Centralised Search Project to identify all clinical trials and add them to CENTRAL. We included randomised controlled trials (RCTs) comparing different final-impression techniques and materials for treating people with complete dentures (CD) and removable partial dentures (RPD). For CD, we included trials that compared different materials or different techniques or both. In RPD for tooth-supported conditions, we included trials comparing the

75 FR 3731 - Proposed Issuance of a General NPDES Permit for Small Suction Dredging-Permit Number IDG-37-0000

Science.gov (United States)

2010-01-22

... System (NPDES) general permit to placer mining operations in Idaho for small suction dredges (intake... ENVIRONMENTAL PROTECTION AGENCY [FRL-9104-3] Proposed Issuance of a General NPDES Permit for Small... significant economic impact on a substantial number of small entities.'' EPA has concluded that NPDES general...

Carboniferous granite basement dredged from a site on the southwest margin of the Challenger Plateau, Tasman Sea

International Nuclear Information System (INIS)

Tulloch, A.J.; Kimbrough, D.L.; Wood, R.A.

1991-01-01

Discordant zircon fractions from a granite sample dredged off a basement horst on the western margin of the Challenger Plateau yield a 335 ± 7 Ma lower intercept date interpreted as the crystallisation age of the granite. This age, and the modal composition of the granite, is similar to that of the Karamea Suite of Westland and Nelson, New Zealand, and some Tasmanian granites. The concordia upper intercept date of 1747 ± 300 Ma implies the presence of Proterozoic continental crustal material in the source region of the granite. The Challenger granite is distinct from older S-type granites of southeastern Australia and I-type granites of northern Victoria Land and Marie Byrd Land, Antarctica. Subsequent to emplacement, the granite was brecciated and hydrothermally altered. A K-Ar age of 95 Ma on hydrothermal sericite indicates that this event overlapped with a major crustal extension event recorded in Westland and Nelson, and predates the oldest known sea floor in the Tasman Basin by at least 11 Ma. (author). 23 refs., 3 figs., 2 tabs

Environmental balance of mining from seafloor

International Nuclear Information System (INIS)

Gomaa, Ehab Elsayed

2013-01-01

evaluation and determination of the environmental performances of different dredging equipment, techniques and procedures. Moreover, the new future developments and latest proposals in the dredging industry have been presented. Also, the new proposal to reduce the turbidity and suspended material effect which is the most important environmental impacts during dredging operations has presented. This research work gives a description of underwater mining techniques and different way of evaluating the dredging equipment's in term of environmental, economic and social aspects. Also, this work presents two different methods of evaluation. The first approach is the statistical analyses method by using the modern Fuzzy evaluation concept. The second slant is a mathematical accounting method by using the information from the Egyptian case study, in order to reach the most environmental-friendly dredging techniques by taking into account the economic and social point of views. The final evaluation showed that the suction and bucket ladder dredger are the best choices. The assessment was made after comparing many parameters such as performance, characteristics, working depth, soil types and project area. Also, this work presents two different new practices for extraction of the underwater placer deposits which occur on the Egyptian Mediterranean coast. The first technique uses floating processing unit in the in situ area, which gets the extracted material and treated it to reduce the transportation costs. The second technique has divided the working area to many stages which make the suction dredger used also for transporting the material into the beach. The pipeline will be the best method of transportation by using the power of suction, which reduce also the transportation costs and also avoid the environmental effects.

Environmental balance of mining from seafloor

Energy Technology Data Exchange (ETDEWEB)

Gomaa, Ehab Elsayed

2013-09-30

evaluation and determination of the environmental performances of different dredging equipment, techniques and procedures. Moreover, the new future developments and latest proposals in the dredging industry have been presented. Also, the new proposal to reduce the turbidity and suspended material effect which is the most important environmental impacts during dredging operations has presented. This research work gives a description of underwater mining techniques and different way of evaluating the dredging equipment's in term of environmental, economic and social aspects. Also, this work presents two different methods of evaluation. The first approach is the statistical analyses method by using the modern Fuzzy evaluation concept. The second slant is a mathematical accounting method by using the information from the Egyptian case study, in order to reach the most environmental-friendly dredging techniques by taking into account the economic and social point of views. The final evaluation showed that the suction and bucket ladder dredger are the best choices. The assessment was made after comparing many parameters such as performance, characteristics, working depth, soil types and project area. Also, this work presents two different new practices for extraction of the underwater placer deposits which occur on the Egyptian Mediterranean coast. The first technique uses floating processing unit in the in situ area, which gets the extracted material and treated it to reduce the transportation costs. The second technique has divided the working area to many stages which make the suction dredger used also for transporting the material into the beach. The pipeline will be the best method of transportation by using the power of suction, which reduce also the transportation costs and also avoid the environmental effects.

33 CFR 336.0 - General.

Science.gov (United States)

2010-07-01

... BE CONSIDERED IN THE EVALUATION OF ARMY CORPS OF ENGINEERS DREDGING PROJECTS INVOLVING THE DISCHARGE... material excavated or dredged from navigable waters of the U.S. will be evaluated by the Corps in... dredged material into the territorial sea would be for the primary purpose of fill, such as the use of...

Biochemical ripening of dredged sediments. Part 2. Degradation of polycyclic aromatic hydrocarbons and total petroleum hydorcarbons in slurried and consolidated sediments

NARCIS (Netherlands)

Vermeulen, J.; Gool, van M.P.M.; Mentink, G.H.; Joziasse, J.; Bruning, H.; Grotenhuis, J.T.C.

2007-01-01

Ripening of polycyclic aromatic hydrocarbons (PAH) and total petroleum hydrocarbons (TPH) polluted dredged sediment can be considered as a bioremediation technique. Aerobic biodegradation of PAH and TPH was studied in five previously anaerobic-slurried sediments during a 350-d laboratory incubation

Final Report: Photo-Directed Molecular Assembly of Multifunctional Inorganic Materials

Energy Technology Data Exchange (ETDEWEB)

B.G. Potter, Jr.

2010-10-15

This final report details results, conclusions, and opportunities for future effort derived from the study. The work involved combining the molecular engineering of photoactive Ti-alkoxide systems and the optical excitation of hydrolysis and condensation reactions to influence the development of the metal-oxygen-metal network at the onset of material formation. Selective excitation of the heteroleptic alkoxides, coupled with control of alkoxide local chemical environment, enabled network connectivity to be influenced and formed the basis for direct deposition and patterning of Ti-oxide-based materials. The research provided new insights into the intrinsic photoresponse and assembly of these complex, alkoxide molecules. Using a suite of electronic, vibrational, and nuclear spectroscopic probes, coupled with quantum chemical computation, the excitation wavelength and fluence dependence of molecular photoresponse and the nature of subsequent hydrolysis and condensation processes were probed in pyridine-carbinol-based Ti-alkoxides with varied counter ligand groups. Several methods for the patterning of oxide material formation were demonstrated, including the integration of this photoprocessing approach with conventional, dip-coating methodologies.

Effects of dredging and macrophyte management on the fish species composition in an old Neotropical reservoir

Directory of Open Access Journals (Sweden)

André Luiz Henríques Esguícero

2017-03-01

Full Text Available Abstract: Aim: As part of the remodeling of an almost century-old dam, in the Rio Jacaré-Guaçu, the dredging and management of macrophytes were carried out in the Gavião Peixoto Reservoir (São Paulo State, Brazil. Data for the reservoir and a river stretch upstream the reservoir were compared, for evaluating the effects of the management procedures. Methods The fish fauna and physical and chemical factors were studied during five years, before (2005-2006 and after the recovery procedures (2007-2009, once a year, during the rainy season. Fishes were caught by gill nets, 10 m long and 1.5, 4, and 6 cm-mesh between adjacent knots. Results After the management procedures, the values of pH and dissolved oxygen increased in the reservoir, whereas conductivity decreased, bringing them closer to those of the upstream stretch. Species richness, diversity, and Catch per Unit Effort in number and biomass, increased in the reservoir after the management. Conclusions After the recovery procedures, the composition of the fish fauna in the reservoir was similar to that of the upstream stretch. The dredging and management of macrophytes in the reservoir benefited the fish fauna diversity, through improvement in water quality and space expansion.

Littoral cells and harbor dredging along the California coast

Science.gov (United States)

Griggs, Gary B.

1987-02-01

Beach compartments or littoral cells form the framework for our understanding of the sources, transport, and sinks of sand in the nearshore zone. In general, along the California coast, beach sand is derived from rivers or clifferosion, moves alongshore under the influence of the prevailing waver conditions, and ultimately is lost either to a submarine canyon or a dune field. Marinas or harbors built either between or at the upcoast ends of beach compartments have been relatively maintenance-free, because of a lack of significant littoral drift at these locations. On the other hand, those harbors built in the middle reaches or at the downcoast ends of littoral cells have had expensive annual dredging problems, because of the interruption of large volumes of littoral drift. Although engineers have labored for years on various breakwater, jetty, or entrance channel configurations, the actual design utilized is of secondary importance. The critical factors are harbor location within a littoral cell and annual litoral drift volume.

36 CFR 1206.86 - What additional materials must I submit with the final narrative report?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What additional materials must I submit with the final narrative report? 1206.86 Section 1206.86 Parks, Forests, and Public... narrative report? You must submit the materials determined by the Commission as found in the NHPRC grant...

40 CFR 230.60 - General evaluation of dredged or fill material.

Science.gov (United States)

2010-07-01

... (previous tests, the presence of polluting industries and information about their discharge or runoff into... is most likely to be free from chemical, biological, or other pollutants where it is composed... industries, municipalities, or other sources, including types and amounts of waste materials discharged along...

Advanced 3D Characterization and Reconstruction of Reactor Materials FY16 Final Report

International Nuclear Information System (INIS)

Fromm, Bradley; Hauch, Benjamin; Sridharan, Kumar

2016-01-01

A coordinated effort to link advanced materials characterization methods and computational modeling approaches is critical to future success for understanding and predicting the behavior of reactor materials that operate at extreme conditions. The difficulty and expense of working with nuclear materials have inhibited the use of modern characterization techniques on this class of materials. Likewise, mesoscale simulation efforts have been impeded due to insufficient experimental data necessary for initialization and validation of the computer models. The objective of this research is to develop methods to integrate advanced materials characterization techniques developed for reactor materials with state-of-the-art mesoscale modeling and simulation tools. Research to develop broad-ion beam sample preparation, high-resolution electron backscatter diffraction, and digital microstructure reconstruction techniques; and methods for integration of these techniques into mesoscale modeling tools are detailed. Results for both irradiated and un-irradiated reactor materials are presented for FY14 - FY16 and final remarks are provided.

Advanced 3D Characterization and Reconstruction of Reactor Materials FY16 Final Report

Energy Technology Data Exchange (ETDEWEB)

Fromm, Bradley [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hauch, Benjamin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sridharan, Kumar [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-12-01

A coordinated effort to link advanced materials characterization methods and computational modeling approaches is critical to future success for understanding and predicting the behavior of reactor materials that operate at extreme conditions. The difficulty and expense of working with nuclear materials have inhibited the use of modern characterization techniques on this class of materials. Likewise, mesoscale simulation efforts have been impeded due to insufficient experimental data necessary for initialization and validation of the computer models. The objective of this research is to develop methods to integrate advanced materials characterization techniques developed for reactor materials with state-of-the-art mesoscale modeling and simulation tools. Research to develop broad-ion beam sample preparation, high-resolution electron backscatter diffraction, and digital microstructure reconstruction techniques; and methods for integration of these techniques into mesoscale modeling tools are detailed. Results for both irradiated and un-irradiated reactor materials are presented for FY14 - FY16 and final remarks are provided.

Settling characteristics of fine-grained sediments used in Louisiana coastal land building and restoration projects

Science.gov (United States)

Ghose Hajra, M.

2016-02-01

Coastal property development, sea level rise, geologic subsidence, loss of barrier islands, increasing number and intensity of coastal storms and other factors have resulted in water quality degradation, wetlands loss, reduced storm and surge protection, ground settlement, and other challenges in coastal areas throughout the world. One of the goals towards reestablishing a healthy coastal ecosystem is to rebuild wetlands with river diversion or sediment conveyance projects that optimally manage and allocate sediments, minimally impact native flora and fauna, and positively affect the water quality. Engineering properties and material characteristics of the dredged material and foundation soils are input parameters in several mathematical models used to predict the long term behavior of the dredged material and foundation soil. Therefore, proper characterization of the dredged material and foundation soils is of utmost importance in the correct design of a coastal restoration and land reclamation project. The sedimentation and consolidation characteristics of the dredged material as well as their effects on the time rate of settlement of the suspended solid particles and underlying foundation soil depend, among other factors, on the (a) grain size distribution of the dredged material, (b) salinity (fresh, brackish, or saltwater environment) of the composite slurry, and (c) concentration of the solid particles in the slurry. This paper will present the results from column settling tests and self-weight consolidation tests performed on dredged samples obtained from actual restoration projects in Louisiana. The effects of salinity, grain size distribution, and initial particle concentration on the sedimentation and consolidation parameters of the dredged material will also be discussed.

Characterization of Underwater Sounds Produced by Trailing Suction Hopper Dredges During Sand Mining and Pump-out Operations

Science.gov (United States)

2014-03-01

machinery itself, such as winches, generators, thrusters and particularly propeller-induced cavitation ; and 5) sounds associated with the off-loading of...dredges were working concurrently. This is not surprising, given that cavitation (propeller noise) contributed the most to the overall sound field. If...in Cook Inlet, Alaska (an area known for high hydrodynamic flow conditions). Their RLs ranged from 95- 120 dB at eight locations. Highest RLs were

New Materials for Electric Drive Vehicles - Final CRADA Report

Energy Technology Data Exchange (ETDEWEB)

Carter, J. David [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-10-18

This project was sponsored by the US DOE Global Initiatives for Proliferation Prevention. The object was for Ukrainian and US partners, including Argonne, AETC, and Dontech to develop special carbon materials and factory production equipment with the goal of making better car batteries to achieve DOE's goals for all-electric and plug-in hybrid electric vehicles. Carbon materials are used in designs for lithium-ion batteries and metal-air batteries, both leading contenders for future electric cars. Specifically, the collaborators planned to use the equipment derived from this project to develop a rechargeable battery system that will use the carbon materials produced by the innovative factory process equipment. The final outcome of the project was that the Ukrainian participants consisting of the Kharkov Institute of Physics and Technology (KIPT), the Institute of Gas of National Academy of Sciences of Ukraine and the Materials Research Center, Ltd. designed, built, tested and delivered 14 pieces of processing equipment for pilot scale carbon production lines at the AETC, Arlington Heights facilities. The pilot scale equipment will be used to process materials such as activated carbon, thermally expanded graphite and carbon coated nano-particles. The equipment was shipped from Ukraine to the United States and received by AETC on December 3, 2013. The equipment is on loan from Argonne, control # 6140. Plug-in hybrid electric vehicles (PHEV) and all-electric vehicles have already demostrated success in the U.S. as they begin to share the market with older hybrid electric designs. When the project was conceived, PHEV battery systems provided a ~40 mile driving range (2011 figures). DOE R&D targets increased this to >100 miles at reduced cost less than $250/kWh (2011 figures.) A 2016 Tesla model S has boasted 270 miles. The project object was to develop pilot-production line equipment for advanced hybrid battery system that achieves cycle life of 1000, an energy

Exploiting Novel Radiation-Induced Electromagnetic Material Changes for Remote Detection and Monitoring: Final Progress Report

Science.gov (United States)

2016-04-01

Exploiting Novel Radiation -Induced Electromagnetic Material Changes for Remote Detection and Monitoring: Final Progress Report Distribution...assess the effects of ionizing radiation on at least three classes of electromagnetic materials. The proposed approach for radiation detection was...that was desired to be monitored remotely. Microwave or low millimeter wave electromagnetic radiation would be used to interrogate the device

Earthworm biomass as additional information for risk assessment of heavy metal biomagnification: a case study for dredged sediment-derived soils and polluted floodplain soils

International Nuclear Information System (INIS)

Vandecasteele, Bart; Samyn, Jurgen; Quataert, Paul; Muys, Bart; Tack, Filip M.G.

2004-01-01

The important role of earthworms in the biomagnification of heavy metals in terrestrial ecosystems is widely recognised. Differences in earthworm biomass between sites is mostly not accounted for in ecological risk assessment. These differences may be large depending on soil properties and pollution status. A survey of earthworm biomass and colonisation rate was carried out on dredged sediment-derived soils (DSDS). Results were compared with observations for the surrounding alluvial plains. Mainly grain size distribution and time since disposal determined earthworm biomass on DSDS, while soil pollution status of the DSDS was of lesser importance. Highest earthworm biomass was observed on sandy loam DSDS disposed at least 40 years ago. - Polluted clayey dredged sediment-derived soils have a relatively low risk for heavy metal biomagnification due to slow earthworm colonisation

Upper Triassic spongiomorph and coral association dredged off the northwestern Australian shelf

Science.gov (United States)

Stanley, G. D.

Upper Triassic corals and spongiomorphs dredged during BMR Cruise 95 from the Rowley Terrace, offshore Canning Basin of northwestern Australia, indicate possible new occurrences of reef facies. These are comparable to counterparts known from the Norhtern Limestone Alps of central Europe. A branching spongiomorph, represented by the genus Spongiomorpha sp. and two coral taxa, Pamiroseris rectilamellosa (Winkler) and Retiophyllia tellae (Stoppani), are reported herein. Collectively, these fossils indicate a Late Triassic (Noria-Rhaetian) age. Although different in taxonomic composition, the fauna compares with one previously reported from a Late Triassic Ocean Drilling Project reef site (site 764) on the Wombat Plateau, some 350 km to the west. The Rowley Terrace occurrences may represent an eastward extension of the Wombat reefs, developed along the rifted margin of Gondwana.

The cumulative impacts of reclamation and dredging on the marine ecology and land-use in the Kingdom of Bahrain.

Science.gov (United States)

Zainal, Khadija; Al-Madany, Ismail; Al-Sayed, Hashim; Khamis, Abdelqader; Al Shuhaby, Suhad; Al Hisaby, Ali; Elhoussiny, Wisam; Khalaf, Ebtisam

2012-07-01

This article assesses the ecological and economic impacts of land reclamation and dredging through consulting recent environmental impact assessment reports. Geographic features of Bahrain during 1963-2008 are produced using Geographical Information System. Extensive but inexpensive shallow coastal areas and tidal flats have been reclaimed particularly from 1997 to 2007 at a high rate of 21 km(2)/year. Formal records show the increase in the original land mass by the year 2008 to be 91 km(2). An estimated total cumulative loss of major habitats resulting from 10 reclamation projects was around 153.58 km(2). Also much larger scale impacts should be considered resulting from the borrow areas used for the extraction of sand or infill materials. A number of key habitats and species are affected in the vicinity of these projects. The study attempts to assign a monetary value to the marine ecosystem functions. There is a need for efficient coastal zone management to regulate a sustainable use of the marine resources. Copyright © 2012 Elsevier Ltd. All rights reserved.

Developing Sediment Transport and Dredging Prediction Model of Ohio River at Olmsted Locks and Dams Area using HEC-RAS (1D/2D)By Ganesh Raj Ghimire1 and Bruce A. Devantier 2

Science.gov (United States)

Ghimire, G. R.

2015-12-01

Sediment deposition is a serious issue in the construction and operation of large reservoir and inland navigation projects in the United States and around the world. Olmsted Locks and Dams in the Ohio River navigation system is facing similar challenges of huge sediment deposition during the ongoing in-wet construction methodology since 1993. HEC-RAS 5.0 integrated with ArcGIS, will be used to yield unsteady 2D hydrodynamic model of Ohio River at Olmsted area. Velocity, suspended sediment, bed sediment and hydrographic survey data acquired from public archives of USGS and USACE Louisville District will be input into the model. Calibration and validation of model will be performed against the measured stage, flow and velocity data. It will be subjected to completely unsteady 1D sediment transport modeling new to HEC-RAS 5.0 which incorporates sediment load and bed gradation via a DSS file, commercial dredging and BSTEM model. Sediment model will be calibrated to replicate the historical bed volume changes. Excavated cross-sections at Olmsted area will also be used to predict the sediment volume trapped inside the ditch over the period between excavations and placement of dam shells at site. Model will attempt to replicate historical dredging volume data and compare with the deposition volume from simulation model to formulate the dredging prediction model. Hence, the results of this research will generate a model that can form a basis for scheduling the dredging event prior to the placement of off-shore cast shells replacing the current as and when required approach of dredging plan. 1 Graduate Student, Department of Civil Engineering, Southern Illinois University Carbondale Carbondale, Illinois, 62901-6603 2 Professor, Department of Civil Engineering, Southern Illinois University Carbondale Carbondale, Illinois, 62901-6603

77 FR 31725 - Safety Zone; Belle Pass Dredge Operations, Belle Pass, Mile Marker 1.0 to Mile Marker (−0.2...

Science.gov (United States)

2012-05-30

... Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to health or risk to safety that may disproportionately affect children. 11...-AA00 Safety Zone; Belle Pass Dredge Operations, Belle Pass, Mile Marker 1.0 to Mile Marker (-0.2), Port...

Application of the microprobe dredging operation in the treatment of the meibomian gland dysfunction(MGD

Directory of Open Access Journals (Sweden)

Qing-Qiang Wang

2014-07-01

Full Text Available AIM: To evaluate the function of the microprobe dredging technology in the treatment of meibomian gland dysfunction(MGDand to provide fast, efficient, economical and practical method of treatment for meibomian gland dysfunction(MGD. METHODS:The 100μm diameter stainless steel wire was made as the microprobe with the total length of 3cm, which the needle was about 5mm and hand shank was about 2.5cm. Selected 140 cases with dry eyes of meibomian gland dysfunction(MGD, patients were divided into two groups and made them have comparability. Observation group(n=70used microprobe to dredge meibomian gland pipe accompanied with drugs, hot compress and meibomian gland massage treatment. The control group(n=70was given conventional drugs, hot compress and meibomian massage treatment. To compare the tear break-up time(BUT, efficient rate and the cure rate of the two groups after treatment of 1d, 1wk, 2wk, 1 mo, 2mo and 3mo.RESULTS: BUT were significantly prolonged in observation group and control group after treatment, and the observation group improved more obviously; the efficient rate and cure rate of the observation group were significantly higher than that of the control group after 1d, 1wk, 2wk, 1mo, 2mo and 3mo treatment. CONCLUSION:Using microprobe to unclog the meibomian gland tube can provide the fast and efficient, economical and practical treatment for meibomian gland dysfunction(MGD, which can be promoted in the clinical practice.

Planting woody crops on dredged contaminated sediment provides both positive and negative effects in terms of remediation

Energy Technology Data Exchange (ETDEWEB)

Hartley, William, E-mail: w.hartley@salford.ac.uk [School of Computing, Science and Engineering, University of Salford, Cockcroft Building, Salford M5 4WT (United Kingdom); Riby, Philip [School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF (United Kingdom); Dickinson, Nicholas M. [Department of Ecology, Lincoln University, Lincoln 7647, Canterbury (New Zealand); Shutes, Brian [Urban Pollution Research Centre, Department of Natural Sciences, Middlesex University, Hendon, London NW4 4BT (United Kingdom); Sparke, Shaun [School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF (United Kingdom); Scholz, Miklas [School of Computing, Science and Engineering, University of Salford, Cockcroft Building, Salford M5 4WT (United Kingdom)

2011-12-15

There is currently a requirement for studies focusing on the long-term sustainability of phytoremediation technologies. Trace element uptake by Salix, Populus and Alnus species planted in dredged contaminated canal sediment and concentrations in sediment and pore waters were investigated, eight years after a phytoremediation trial was initiated in NW England. Soil biological activity was also measured using invertebrate and microbial assays to determine soil quality improvements. Zinc was the dominant trace metal in foliage and woody stems, and the most mobile trace element in sediment pore water ({approx}14 mg l{sup -1}). Biological activity had improved; earthworm numbers had increased from 5 to 24, and the QBS index (an index of microarthropod groups in soil) had increased from 70 to 88. It is concluded that biological conditions had improved and natural processes appear to be enhancing soil quality, but there remains a potential risk of trace element transfer to the wider environment. - Highlights: > Trees provide positive and negative effects for remediation of dredged sediment. > Biological conditions had improved and natural processes enhance soil quality. > Zinc was the dominant trace metal in foliage and sediment pore waters. > Metal contaminants remain a problem in relation to their wider environmental fate. > A sustainable environment appears to be forming as a result of natural attenuation. - Soil biological quality improves in a woody crop stand eight years after a phytoremediation trial.

Leaching study of contaminated and remediated soil and dredged sludge and development of a fast testing procedure for determining the leachability of contaminants; Uitloogonderzoek aan verontreinigde en gereinigde grond en baggerspecie en ontwikkeling van verkorte proceudres ter bepaling van de uitloging

Energy Technology Data Exchange (ETDEWEB)

Zevenbergen, C.; Frapporti, G.; Keyzer, J.; Heynen, J.J.M.

1997-08-01

A large study, performed jointly by ECN and IWACO, in which the effect of soil remediation on the leachability of contaminants from soils was investigated, is summarized. The study included two specific aims, which are treated in more detail in two separate reports: (1) The development of a fast testing procedure for determining the leachability of pollutants from contaminated and treated soils, which allows for an assessment relative to the regulatory limits stated in the Dutch Building Materials Decree; and (2) To develop a better understanding of the physico-chemical processes underlying the leachability of contaminants, including the development of a model for the leaching of pollutants from contaminated and treated soils and dredged sludge. The development of a fast testing procedure is reported in this report. The study of physico-chemical processes is reported in `Speciation of metals in contaminated and remediated soil and dredged sludge. Leaching processes and controlling factors` (ECN-C--96-084). The contaminants dealt with in this report are arsenic, copper, cadmium, mercury, lead, zinc, and cyanide, as well as a limited amount of contaminated and remediated aquatic sediments. 13 figs., 2 tabs, 8 refs.

75 FR 19311 - Ocean Dumping; Guam Ocean Dredged Material Disposal Site Designation

Science.gov (United States)

2010-04-14

... not all suitable materials can be re-used or stockpiled for future use given costs, logistical... not expected with regard to vessel safety and operational costs. The lack of impact is expected... reporting and record-keeping burden on the regulated community, as well as to minimize the cost of Federal...

Puget Sound Dredged Disposal Analysis (PSDDA). Final Environmental Impact Statement Unconfined Open-Water Disposal for Dredged Material, Phase 2. (North and South Puget Sound)

Science.gov (United States)

1989-09-01

chinook have a more diverse diet spectrum. Their prey would consist of riverborne insects , small crustaceans, and juvenile fish. They also are prey to...stant Manager Division of Acuatic Lands 206/586-6375 c: MPWG Os.cg D D-3 MSPH R. BLUM. tDirect or- - "- ’, i ’"" STATE OF WASHINGTON DEPARTMENT OF

Evaluation of Koontz Lake (North Indiana) Ecological Restoration Options - Comparison of Dredging and Aeration - and Broad Application to USACE Projects

Science.gov (United States)

2018-01-01

necessity of dredging, special water treatment, and maintenance of shipping and stream channels (Glassner-Shwayder 1993). Influxes of sediment have an...eutrophication, harmful algae, invasive plants, and shallowing due to accumulation of sediment and muck. A study was conducted to assist in evaluating... sediments . (The U.S. Army Engineer Research and Development Center does not endorse any specific products or brands). DISCLAIMER: The contents of this

The Deepest Cut: Political Ecology in the Dredging of a New Sea Mouth in Chilika Lake, Orissa, India

Directory of Open Access Journals (Sweden)

Dujovny Eial

2009-01-01

Full Text Available This paper explores the political and historical ecology surrounding the 2002 dredging of a new sea mouth in Chilika Lake, India. It contends that the use of Geographic Information Systems (GIS and mathematical flow models advanced an ′environmental orthodoxy′ that coalesced around the narrative of a rapidly ′shifting sea mouth′. This orthodoxy ignored historical evidence of the importance of seasonal flooding to the ecosystem′s health and discounted the fishing communities′ concerns regarding the introduction of prawn aquaculture. The product of over two centuries of flood control policies, this hydrological intervention has freed up waterlogged soils for cultivation and produced favourable conditions for the further spread of prawn aquaculture in the lake. While ostensibly engineered to improve the lake′s ecology and benefit the fishing communities, this paper argues that the much-touted intervention has unsettled a slew of ecological relationships and primarily benefited the lake′s agricultural communities. Most recently, unanticipated declines in the fishery have led to calls for further studies and government interventions. This research contends that successive attempts to engineer solutions for Chilika and its watershed are precisely what necessitate additional interventions. At the same time, it questions the Indian government′s claim that the dredging of a new sea mouth was both necessary and scientifically sound.

Determining Recovery Potential of Dredged Material for Beneficial Use - Site Characterization; Prescriptive Approach

National Research Council Canada - National Science Library

Olin-Estes, Trudy

2000-01-01

... of physical separation. The first technical note(Olin-Estes and Palermo 2000) introduces physical separation concepts and presents mathematical relationships for estimating material recovery potential (MRP...

Planting woody crops on dredged contaminated sediment provides both positive and negative effects in terms of remediation

International Nuclear Information System (INIS)

Hartley, William; Riby, Philip; Dickinson, Nicholas M.; Shutes, Brian; Sparke, Shaun; Scholz, Miklas

2011-01-01

There is currently a requirement for studies focusing on the long-term sustainability of phytoremediation technologies. Trace element uptake by Salix, Populus and Alnus species planted in dredged contaminated canal sediment and concentrations in sediment and pore waters were investigated, eight years after a phytoremediation trial was initiated in NW England. Soil biological activity was also measured using invertebrate and microbial assays to determine soil quality improvements. Zinc was the dominant trace metal in foliage and woody stems, and the most mobile trace element in sediment pore water (∼14 mg l -1 ). Biological activity had improved; earthworm numbers had increased from 5 to 24, and the QBS index (an index of microarthropod groups in soil) had increased from 70 to 88. It is concluded that biological conditions had improved and natural processes appear to be enhancing soil quality, but there remains a potential risk of trace element transfer to the wider environment. - Highlights: → Trees provide positive and negative effects for remediation of dredged sediment. → Biological conditions had improved and natural processes enhance soil quality. → Zinc was the dominant trace metal in foliage and sediment pore waters. → Metal contaminants remain a problem in relation to their wider environmental fate. → A sustainable environment appears to be forming as a result of natural attenuation. - Soil biological quality improves in a woody crop stand eight years after a phytoremediation trial.

Removal of trace metals and improvement of dredged sediment dewaterability by bioleaching combined with Fenton-like reaction.

Science.gov (United States)

Zeng, Xiangfeng; Twardowska, Irena; Wei, Shuhe; Sun, Lina; Wang, Jun; Zhu, Jianyu; Cai, Jianchao

2015-05-15

Bioleaching by Aspergillus niger strain SY1 combined with Fenton-like reaction was optimized to improve trace metal removal and dewaterability of dredged sediments. The major optimized parameters were the duration of bioleaching and H₂O₂ dose in Fenton-like process (5 days and 2g H₂O₂/L, respectively). Bioleaching resulted in the removal of ≈90% of Cd, ≈60% of Zn and Cu, ≈20% of Pb, and in decrease of sediment pH from 6.6 to 2.5 due to organic acids produced by A. niger. After addition of H₂O₂, Fenton-like reaction was initiated and further metal removal occurred. Overall efficiency of the combined process comprised: (i) reduction of Cd content in sediment by 99.5%, Cu and Zn by >70% and Pb by 39% as a result of metal release bound in all mobilizable fractions; (ii) decrease of sediment capillary suction time (CST) from 98.2s to 10.1s (by 89.8%) and specific resistance to filtration (SRF) from 37.4×10(12)m/kg to 6.2×10(12)m/kg (by 83.8%), due to reducing amount of extracellular polymeric substances (EPS) by 68.7% and bound water content by 79.1%. The combined process was found to be an efficient method to remove trace metals and improve dewaterability of contaminated dredged sediments. Copyright © 2015 Elsevier B.V. All rights reserved.

Phosphate bonded ceramics as candidate final-waste-form materials

International Nuclear Information System (INIS)

Singh, D.; Wagh, A.S.; Cunnane, J.; Sutaria, M.; Kurokawa, S.; Mayberry, J.

1994-04-01

Room-temperature setting phosphate-bonded ceramics were studied as candidate materials for stabilization of DOE low-level problem mixed wastes which cannot be treated by other established stabilization techniques. Phosphates of Mg, Mg-Na, Al and Zr were studied to stabilize ash surrogate waste containing RCRA metals as nitrates and RCRA organics. We show that for a typical loading of 35 wt.% of the ash waste, the phosphate ceramics pass the TCLP test. The waste forms have high compression strength exceeding ASTM recommendations for final waste forms. Detailed X-ray diffraction studies and differential thermal analyses of the waste forms show evidence of chemical reaction of the waste with phosphoric acid and the host matrix. The SEM studies show evidence of physical bonding. The excellent performance in the leaching tests is attributed to a chemical solidification and physical as well as chemical bonding of ash wastes in these phosphate ceramics

State surveillance of radioactive material transportation. Final report

International Nuclear Information System (INIS)

Salomon, S.N.

1984-02-01

The main objective of this final report on the state surveillance of the transportation of radioactive material (RAM) is to suggest the most cost-effective inspection areas where enforcement actions might be taken by the states during their participation in the State Hazardous Materials Enforcement Development (SHMED) Program. On the basis of the lessons learned from the surveillance program, these actions are enforcement at low-level radioactive burial sites by means of civil penalties and site use suspension; enforcement at airports and at terminals that forward freight; and enforcement of courier companies. More effective and efficient enforcement can be achieved through instrumented police patrol cars and remote surveillance because they require the least amount of time of enforcement personnel. In addition, there is a strong relationship between effective emergency response and enforcement because the appropriate shipping papers, placarding and knowledge of appropriate emergency response procedures lead to improved emergency response. These lessons originate from a ten-state surveillance program from 1977 through 1981 jointly sponsored by the US Nuclear Regulatory Commission (NRC) and DOT. The states give recommendations in the categories of education, training, expanded surveillance, coordination and enforcement. The topics of special interest covered include low-level radioactive waste disposal sites, airports, cargo terminals, highways, ports, and accidents and incidents. The three most common problems in compliance with RAM transportation regulations reported by the states are incorrect package labeling; improper shipping papers; and incorrect or missing placards. Other common problems reported by the states are summarized. The relationship to other studies, the status of the SHMED Program, a synopsis of state RAM surveillance reports, and NRC/DOT expenditures are given

A survey of U.S. prosthodontists and dental schools on the current materials and methods for final impressions for complete denture prosthodontics.

Science.gov (United States)

Petrie, Cynthia S; Walker, Mary P; Williams, Karen

2005-12-01

The purpose of this study was to survey members of The American College of Prosthodontists (ACP) to evaluate current materials and methods for final impressions for complete denture prosthodontics in the United States. In addition, those methods were compared with methods and materials taught in U.S. dental schools via a second survey sent to the chairpersons of prosthodontic/restorative departments. An anonymous questionnaire was mailed to all 1762 active ACP members in the United States in 2003. A slightly modified questionnaire was also distributed to chairpersons of prosthodontic/restorative departments in the 54 U.S. dental schools. Data analysis was performed via frequency distribution and chi-square statistics. Nine hundred and forty-five questionnaires were returned by members of the ACP (54% return rate) and 42 questionnaires were returned by the U.S. dental schools (78% return rate). The majority of the reporting prosthodontists (88%) and dental schools (98%) use a border-molded custom tray for final impressions for complete denture prosthodontics. The most popular material for border molding was plastic modeling compound (67% of reporting ACP members, and 95% of the responding dental schools). Variability of the materials used for final impressions was observed, with the most popular materials being polyvinylsiloxane for the ACP members (36%) and polysulfide for the dental schools (64%). Statistically significant differences were found in the materials used for border molding by prosthodontists based on the time elapsed since completion of prosthodontic training. No differences were found in the materials used for impression of edentulous arches based on years of experience. Geographic location did not influence the materials and methods used by prosthodontists for complete denture final impressions. There was variability of the materials and techniques used for final impressions by ACP members and dental schools; however, overall there was an agreement

Characterization of sediment from the dredging of storm water channels in the city of Salvador-BA, Brazil aiming to use in structural ceramics

International Nuclear Information System (INIS)

Santos, O.C.; Breitenbach, S.B.; Coelho, R.E.; Andrade, J.C.S.; Sales Junior, J.C.C.; Paskocimas, C.A.; Martinelli, A.E.; Nascimento, R.M.

2017-01-01

The aim of this study was to characterize sediment from the dredging of storm water channels (Scp) in the city of Salvador, Bahia, aiming its maximum replacement by clay in structural ceramics, since this binary mixture is part of the pilot project of the standard mass, in the research of interlocked block ceramic formulation. Initially, the sediment was submitted to the following tests: plasticity index; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; thermal and particle size analyses. The morphology of the material was analyzed by scanning electron microscopy, coupled with energy dispersive spectroscopy. Then, sediment (Scp) was added to clay from the municipality of Candelas, Bahia, in the proportions of 10, 20, 30 and 40 wt%. Specimens were prepared by uniaxial pressing in dimensions of 60 mm x 20 mm, with compacting pressure of 25 MPa, and the material was humidified with 8% of water. Firing was conducted in resistive furnace at temperatures of 850, 950 and 1050 deg C, with 5 deg C / min heating rate. The properties evaluated were: linear shrinkage; water absorption and modulus of rupture. The results indicated the possibility of using SCP in structural ceramics by the prerequisites required in standards, in the manufacture of tiles, sealing blocks and bricks. (author)

The Dredging of the Sacred Cenote of Chichen Itzá 1904-1914

Directory of Open Access Journals (Sweden)

Guillermo Palacios

2017-09-01

Full Text Available This article analyzes the “restoration” of a treasure of incalculable value, taken from Chichen Itzá’s Sacred Cenote with the help of a primitive dredge installed along its edge by Edward H. Thompson, then the U.S. consul in Progreso, and financed by Harvard University’s Peabody Museum and private collectors from the Boston area. This “restoration” began in 1904 and continued up until 1907, with periodic resumptions up until 1909, the year in which Thompson resigned from his consular position, which marked the weakening of the network of complicity that he had been weaving since 1875 to allow him to illegally export hundreds of Maya pieces to the University of Cambridge. The article concludes in 1914, when the violence of the Mexican Revolution unintentionally put an end to the looting of Chichén Itzá.

Dendrochemical assessment of mercury releases from a pond and dredged-sediment landfill impacted by a chlor-alkali plant.

Science.gov (United States)

Maillard, François; Girardclos, Olivier; Assad, Mohamad; Zappelini, Cyril; Pérez Mena, Julia Maria; Yung, Loïc; Guyeux, Christophe; Chrétien, Stéphane; Bigham, Gary; Cosio, Claudia; Chalot, Michel

2016-07-01

Although current Hg emissions from industrial activities may be accurately monitored, evidence of past releases to the atmosphere must rely on one or more environmental proxies. We used Hg concentrations in tree cores collected from poplars and willows to investigate the historical changes of Hg emissions from a dredged sediment landfill and compared them to a nearby control location. Our results demonstrated the potential value of using dendrochemistry to record historical Hg emissions from past industrial activities. Copyright © 2016 Elsevier Inc. All rights reserved.

The 2016-2018 National Plan of Management of Radioactive Materials and Wastes. Final report

International Nuclear Information System (INIS)

2017-01-01

A first document contains the final version of the French National Plan of Management of Radioactive Materials and Wastes (PNGMDR) for the period 2016-2018: principles and objectives (presentation of radioactive materials and wastes, principles to be taken into account to define pathways of management of radioactive wastes, legal and institutional framework, information transparency), the management of radioactive materials (context and challenges, management pathways, works on fast breeder reactors of fourth generation), assessment and perspectives of existing pathways of management of radioactive wastes (management of historical situations, management of residues of mining and sterile processing, management of waste with a high natural radioactivity, management of very short life waste, of very low activity wastes, and low and medium activity wastes), needs and perspectives regarding management processes to be implemented for the different types of radioactive wastes. Appendices to this document contain: a recall of the content of previous PNGMDR since 2007, a synthesis of realisations and researches performed abroad, research orientations for the concerned period, and international agreement on spent fuel and radioactive waste management. A second document, released by the ASN, proposes an environmental and strategic assessment of the plan. A third one and a fourth one contain the opinion of the Environmental Authority on the plan preliminary focus and the answer to the Environmental Authority by the ASN. Finally, a synthesis of the remarks made by the public about the PNGMDR and the answers to these remarks conclude the document

The first stage of BFS integrated system for nuclear materials control and accounting. Final report

International Nuclear Information System (INIS)

1996-09-01

The BFS computerized accounting system is a network-based one. It runs in a client/server mode. The equipment used in the system includes a computer network consisting of: One server computer system, including peripheral hardware and three client computer systems. The server is located near the control room of the BFS-2 facility outside of the 'stone sack' to ensure access during operation of the critical assemblies. Two of the client computer systems are located near the assembly tables of the BFS-1 and BFS-2 facilities while the third one being the Fissile Material Storage. This final report details the following topics: Computerized nuclear material accounting methods; The portal monitoring system; Test and evaluation of item control technology; Test and evaluation of radiation based nuclear material measurement equipment; and The integrated demonstration of nuclear material control and accounting methods

Proceedings from the U.S. Army Corps of Engineers (USACE) and the National Oceanic and Atmospheric Administration (NOAA) Natural and Nature-Based Features Workshop

Science.gov (United States)

2016-03-01

settings. Those examples included, but were not limited to vegetation plantings on dredged material placement areas and dunes; ecosystem restoration...tools with sanctuaries , estuarine reserves, marine protected areas, and other assets located in coastal areas around the nation. These places and...9. Vegetation on Dredged Material Placement Areas: This proposed project would use native plants as engineering materials for developing NNBF in

Red River Stream Improvement Final Design Nez Perce National Forest.

Energy Technology Data Exchange (ETDEWEB)

Watershed Consulting, LLC

2007-03-15

This report details the final stream improvement design along the reach of Red River between the bridge below Dawson Creek, upstream for approximately 2 miles, Idaho County, Idaho. Geomorphic mapping, hydrologic profiles and cross-sections were presented along with existing fish habitat maps in the conceptual design report. This information is used to develop a stream improvement design intended to improve aquatic habitat and restore riparian health in the reach. The area was placer mined using large bucket dredges between 1938 and 1957. This activity removed most of the riparian vegetation in the stream corridor and obliterated the channel bed and banks. The reach was also cut-off from most valley margin tributaries. In the 50 years since large-scale dredging ceased, the channel has been re-established and parts of the riparian zone have grown in. However, the recruitment of large woody debris to the stream has been extremely low and overhead cover is poor. Pool habitat makes up more than 37% of the reach, and habitat diversity is much better than the project reach on Crooked River. There is little large woody debris in the stream to provide cover for spawning and juvenile rearing, because the majority of the woody debris does not span a significant part of the channel, but is mainly on the side slopes of the stream. Most of the riparian zone has very little soil or subsoil left after the mining and so now consists primarily of unconsolidated cobble tailings or heavily compacted gravel tailings. Knapweed and lodgepole pine are the most successful colonizers of these post mining landforms. Tributary fans which add complexity to many other streams in the region, have been isolated from the main reach due to placer mining and road building.

Buried waste containment system materials. Final Report

International Nuclear Information System (INIS)

Weidner, J.R.; Shaw, P.G.

1997-10-01

This report describes the results of a test program to validate the application of a latex-modified cement formulation for use with the Buried Waste Containment System (BWCS) process during a proof of principle (POP) demonstration. The test program included three objectives. One objective was to validate the barrier material mix formulation to be used with the BWCS equipment. A basic mix formula for initial trials was supplied by the cement and latex vendors. The suitability of the material for BWCS application was verified by laboratory testing at the Idaho National Engineering and Environmental Laboratory (INEEL). A second objective was to determine if the POP BWCS material emplacement process adversely affected the barrier material properties. This objective was met by measuring and comparing properties of material prepared in the INEEL Materials Testing Laboratory (MTL) with identical properties of material produced by the BWCS field tests. These measurements included hydraulic conductivity to determine if the material met the US Environmental Protection Agency (EPA) requirements for barriers used for hazardous waste sites, petrographic analysis to allow an assessment of barrier material separation and segregation during emplacement, and a set of mechanical property tests typical of concrete characterization. The third objective was to measure the hydraulic properties of barrier material containing a stop-start joint to determine if such a feature would meet the EPA requirements for hazardous waste site barriers

Contaminant accumulation and biomarker responses in caged mussels, Mytilus galloprovincialis, to evaluate bioavailability and toxicological effects of remobilized chemicals during dredging and disposal operations in harbour areas

International Nuclear Information System (INIS)

Bocchetti, Raffaella; Fattorini, Daniele; Pisanelli, Barbara; Macchia, Simona; Oliviero, Lisa; Pilato, Fabiano; Pellegrini, David; Regoli, Francesco

2008-01-01

Remobilization of chemicals from contaminated sediments is a major risk associated with dredging and disposal operations in harbour areas. In this work caged mussels, Mytilus galloprovincialis, were chosen as bioindicator organisms to reveal the impact and recovery of organisms from these activities in the harbour of Piombino (Tuscany, Italy) where approximately 100,000 m 3 of sediments were removed and disposed in a local confined disposal facility (CDF). Organisms were deployed before, during and after the end of operations, selecting sites differently impacted by these activities. Temporal changes in environmental bioavailability and biological effects of pollutants were assessed by integrating analyses of trace metals and polycyclic aromatic hydrocarbons (PAHs) accumulated in tissues of caged mussels with a wide array of biomarkers reflecting exposure to specific classes of pollutants and different levels of cellular unbalance or toxicity. Such biological responses included levels of metallothioneins, activity of acyl CoA oxidase (AOX) as a marker of peroxisome proliferation, oxidative stress biomarkers (content of glutathione, enzymatic activities of catalase, glutathione S-transferases, glutathione reductase, glutathione peroxidases), total oxyradical scavenging capacity (TOSC) toward peroxyl and hydroxyl radicals, lysosomal membrane stability and genotoxic effects measured as DNA strand breaks and frequency of micronuclei. Obtained results indicated that a general disturbance was already present in the whole harbour area and especially in the inner site before the beginning of operations, when caged mussels exhibited a significant accumulation of PAHs and Pb, lower TOSC values and higher levels of both lysosomal and genotoxic damages. Bioavailability of trace metals and PAHs markedly increased during dredging activities with values up to 40 μg/g for Pb and up to 2200 ng/g for PAHs in tissues of caged mussels, a significant inhibition of antioxidant

Contaminant accumulation and biomarker responses in caged mussels, Mytilus galloprovincialis, to evaluate bioavailability and toxicological effects of remobilized chemicals during dredging and disposal operations in harbour areas

Energy Technology Data Exchange (ETDEWEB)

Bocchetti, Raffaella; Fattorini, Daniele; Pisanelli, Barbara [Istituto di Biologia e Genetica, Universita Politecnica delle Marche, Via Ranieri Monte d' Ago, 60100 Ancona (Italy); Macchia, Simona; Oliviero, Lisa; Pilato, Fabiano; Pellegrini, David [Istituto Centrale per la Ricerca Scientifica e Tecnologica Applicata al Mare (ICRAM), Viale Nazario Sauro 4, 57128 Livorno (Italy); Regoli, Francesco [Istituto di Biologia e Genetica, Universita Politecnica delle Marche, Via Ranieri Monte d' Ago, 60100 Ancona (Italy)], E-mail: f.regoli@univpm.it

2008-09-29

Remobilization of chemicals from contaminated sediments is a major risk associated with dredging and disposal operations in harbour areas. In this work caged mussels, Mytilus galloprovincialis, were chosen as bioindicator organisms to reveal the impact and recovery of organisms from these activities in the harbour of Piombino (Tuscany, Italy) where approximately 100,000 m{sup 3} of sediments were removed and disposed in a local confined disposal facility (CDF). Organisms were deployed before, during and after the end of operations, selecting sites differently impacted by these activities. Temporal changes in environmental bioavailability and biological effects of pollutants were assessed by integrating analyses of trace metals and polycyclic aromatic hydrocarbons (PAHs) accumulated in tissues of caged mussels with a wide array of biomarkers reflecting exposure to specific classes of pollutants and different levels of cellular unbalance or toxicity. Such biological responses included levels of metallothioneins, activity of acyl CoA oxidase (AOX) as a marker of peroxisome proliferation, oxidative stress biomarkers (content of glutathione, enzymatic activities of catalase, glutathione S-transferases, glutathione reductase, glutathione peroxidases), total oxyradical scavenging capacity (TOSC) toward peroxyl and hydroxyl radicals, lysosomal membrane stability and genotoxic effects measured as DNA strand breaks and frequency of micronuclei. Obtained results indicated that a general disturbance was already present in the whole harbour area and especially in the inner site before the beginning of operations, when caged mussels exhibited a significant accumulation of PAHs and Pb, lower TOSC values and higher levels of both lysosomal and genotoxic damages. Bioavailability of trace metals and PAHs markedly increased during dredging activities with values up to 40 {mu}g/g for Pb and up to 2200 ng/g for PAHs in tissues of caged mussels, a significant inhibition of antioxidant

40Ar-39Ar dating of hornfels dredged near the Japan trench

International Nuclear Information System (INIS)

Takigami, Yutaka; Fujioka, Kantaro

1989-01-01

During the KH 81-3 Cruise of the R/V Hakuho-Maru, biotite-bearing hornfelses were dredged from the landward slope of the Japan Trench. Bulk sample and separated biotite were dated by the 40 Ar- 39 Ar method and they showed 40 Ar- 39 Ar ages of 28.9±1.4 Ma and 28.5±1.4 Ma, respectively. This would indicate that biotite was formed at about 29 Ma by the thermal metamorphism which might have related with some magmatic activity. In this magmatic activity was caused by the subducting oceanic plate in the similar conditions at present, it seems to have occurred at a place too close to the present trench axis. This discrepancy could be explained by such processes as the change of the angle of the subducting plate, the moving of the trench axis by tectonic erosion and so on. However, more age data are required to solve this discrepancy. (author)

Materials, Strands, and Cables for Superconducting Accelerator Magnets. Final Report

Energy Technology Data Exchange (ETDEWEB)

Sumption, Mike D. [Ohio State University, Columbia, OH (United States); Collings, Edward W. [Ohio State University, Columbia, OH (United States)

2014-09-19

This report focuses on Materials, Strands and Cables for High Energy Physics Particle accelerators. In the materials area, work has included studies of basic reactions, diffusion, transformations, and phase assemblage of Nb₃Sn. These materials science aspects have been married to results, in the form of flux pinning, B_c2, B_irr, and transport J_c, with an emphasis on obtaining the needed J_c for HEP needs. Attention has also been paid to the “intermediate-temperature superconductor”, magnesium diboride emphasis being placed on (i) irreversibility field enhancement, (ii) critical current density and flux pinning, and (iii) connectivity. We also report on studies of Bi-2212. The second area of the program has been in the area of “Strands” in which, aside from the materials aspect of the conductor, its physical properties and their influence on performance have been studied. Much of this work has been in the area of magnetization estimation and flux jump calculation and control. One of the areas of this work was strand instabilities in high-performance Nb₃Sn conductors due to combined fields and currents. Additionally, we investigated quench and thermal propagation in YBCO coated conductors at low temperatures and high fields. The last section, “Cables”, focussed on interstrand contact resistance, ICR, it origins, control, and implications. Following on from earlier work in NbTi, the present work in Nb₃Sn has aimed to make ICR intermediate between the two extremes of too little contact (no current sharing) and too much (large and unacceptable magnetization and associated beam de-focussing). Interstrand contact and current sharing measurements are being made on YBCO based Roebel cables using transport current methods. Finally, quench was investigated for YBCO cables and the magnets wound from them, presently with a focus on 50 T solenoids for muon collider applications.

40 CFR 230.77 - Other actions.

Science.gov (United States)

2010-07-01

... needs of fish and wildlife; (c) In dredging projects funded by Federal agencies other than the Corps of... discharge of dredged or fill material, the permitting authority should consider the ecosystem that will be...

Recommended Determination of Region IV Concerning the Yazoo Backwater Area Pumps Project

Science.gov (United States)

This document explains the basis for EPA Region IV’s recommendation to prohibit the specification of certain waters of the United States as a discharge site for dredge site for dredged or fill material.

Larval Fish Feeding Responses to Variable Suspended Sediment and Planktonic Prey Concentrations

National Research Council Canada - National Science Library

Colby, D

2004-01-01

... impacts from dredging projects. For example, in the context of nearshore placement of mixed sediments, concerns have been raised that winnowing of fine sediments from deposited dredged material may elevate turbidity and have a...

On the necessity of ecotoxicological assessments of aquatic sediments

International Nuclear Information System (INIS)

Krebs, F.

1992-01-01

The guidelines for dredged material adopted by the Oslo Commission in June 1991 impose stricter obligations on its member states regarding the management of dredged material in the marine environment. It can be assumed that the basic ideas of these guidelines will become the model for inland waterways as well. For an environmentally acceptable management of dredging operations and the collection of evidence against polluters, ecotoxicological investigations on the behaviour of contaminants in waters are required in addition to chemical analyses. The practical application of these guidelines is hampered by the fact that no standardized biotests for sediments exist in Germany to date. The paper describes situations in which standardized biotest methods of aquatic ecotoxicology can already be used. A concept for the biological assessment of sediments is still lacking. It is necessary to define quality objectives for the evaluation of chemical and ecotoxicological data with a view to ecologically acceptable management of dredged material. (orig.) [de

Advisory group meeting on safeguards related to final disposal of nuclear material in waste and spent fuel

International Nuclear Information System (INIS)

1988-07-01

This paper is primarily concerned with Section 11 of INFCIRC/153 which provides for the possible termination of safeguards based on a determination that the nuclear material in question has been consumed, has been diluted, or has become practicably irrecoverable. Two distinctly different categories of nuclear material have been suggested for possible termination of safeguards based on a determination that the nuclear material has become practicably irrecoverable: One relates to a variety of low concentration waste materials, meaning thereby materials which the State or plant operator considers to be of questionable economic recoverability and the other relates to the spent fuel placed in facilities described as ''permanent repositories'' which are at least claimed to represent ''final disposal'' facilities and are candidates for a possible determination of practicably irrecoverable. 26 refs, tabs

Predicting dredging-associated effects to coral reefs in Apra Harbor, Guam - Part 2: Potential coral effects.

Science.gov (United States)

Nelson, Deborah Shafer; McManus, John; Richmond, Robert H; King, David B; Gailani, Joe Z; Lackey, Tahirih C; Bryant, Duncan

2016-03-01

Coral reefs are in decline worldwide due to anthropogenic stressors including reductions in water and substratum quality. Dredging results in the mobilization of sediments, which can stress and kill corals via increasing turbidity, tissue damage and burial. The Particle Tracking Model (PTM) was applied to predict the potential impacts of dredging-associated sediment exposure on the coral reef ecosystems of Apra Harbor, Guam. The data were interpreted using maps of bathymetry and coral abundance and distribution in conjunction with impact parameters of suspended sediment concentration (turbidity) and sedimentation using defined coral response thresholds. The results are presented using a "stoplight" model of negligible or limited impacts to coral reefs (green), moderate stress from which some corals would be expected to recover while others would not (yellow) and severe stress resulting in mortality (red). The red conditions for sediment deposition rate and suspended sediment concentration (SSC) were defined as values exceeding 25 mg cm(-2) d(-1) over any 30 day window and >20 mg/l for any 18 days in any 90 day period over a column of water greater than 2 m, respectively. The yellow conditions were defined as values >10 mg cm(-2) d(-1) and <25 mg cm(-2) d(-1) over any 30 day period, and as 20% of 3 months' concentration exceeding 10 mg/l for the deposition and SSC, respectively. The model also incorporates the potential for cumulative effects on the assumption that even sub-lethal stress levels can ultimately lead to mortality in a multi-stressor system. This modeling approach can be applied by resource managers and regulatory agencies to support management decisions related to planning, site selection, damage reduction, and compensatory mitigation. Published by Elsevier Ltd.

Impact assessment of dredging to remove coal fly ash at the Tennessee Valley Authority Kingston Fossil plant using fathead minnow elutriate exposures.

Science.gov (United States)

Stanley, Jacob K; Kennedy, Alan J; Bednar, Anthony J; Chappell, Mark A; Seiter, Jennifer M; Averett, Daniel E; Steevens, Jeffery A

2013-04-01

On December 22, 2008, failure of an earthen containment structure resulted in the release of approximately 4.1 million m(3) of coal fly ash into the Emory River and the surrounding area from the Tennessee Valley Authority Kingston Fossil Plant near Kingston, Tennessee, USA. The purpose of the present study was to assess the potential of dredging activities performed to remove the fly ash from the river to result in increased risk to pelagic fish, with special consideration of mobilization of metals. Elutriates were created using two sources of fly ash by bubbling with air over 10 d. This elutriate preparation method was designed to represent worst-case conditions for oxidation, metal release, and dissolution. Larval and juvenile Pimephales promelas underwent 10-d exposures to these elutriates. Larval end points included survival and biomass, and juvenile end points included survival, length, biomass, liver somatic index, and bioaccumulation. No significant toxicity was observed. Bioaccumulation of metals in juveniles was found to be primarily attributable to metals associated with particles in the gut. Results suggest little potential for toxicity to related fish species due to fly ash removal dredging activities given the extreme conditions represented by the elutriates in the present study. Copyright © 2013 SETAC.

Gender difference in walleye PCB concentrations persists following remedial dredging

Science.gov (United States)

Madenjian, Charles P.; Jude, David J.; Rediske, Richard R.; O'Keefe, James P.; Noguchi, George E.

2009-01-01

Eleven male walleyes (Sander vitreus) and 10 female walleyes from the Saginaw Bay (Lake Huron) population were caught during the spawning run at Dow Dam (Midland, Michigan) in the Tittabawassee River during April 1996, and individual whole-fish polychlorinated biphenyl (PCB) determinations were made. Total PCB concentrations averaged 7.95 and 3.17??mg/kg for males and females, respectively. As part of the Natural Resource Damage Assessment remediation process, contaminated sediments from the Saginaw River, the main tributary to Saginaw Bay, were removed during 2000 and 2001. Total PCB concentrations of 10 male and 10 female walleyes caught at Dow Dam during April 2007 averaged 1.58 and 0.55??mg/kg, respectively. Thus, dredging of the Saginaw River appeared to be effective in reducing PCB concentrations of Saginaw Bay adult walleyes, as both males and females decreased in PCB concentration by more than 80% between 1996 and 2007. However, the ratio of male PCB concentration to female PCB concentration did not decline between 1996 and 2007. This persistent gender difference in PCB concentrations was apparently due to a gender difference in habitat utilization coupled with a persistent spatial gradient in prey fish PCB concentrations from the Saginaw River to Lake Huron.

Zinc and cadmium mobility in a 5-year-old dredged sediment deposit: experiments and modelling

Energy Technology Data Exchange (ETDEWEB)

Lions, J. [BRGM, Orleans (France). Water Div.; Centre National de Recherche sur les Sites et Sols Pollues, Douai (France); Lee, J. van der [Ecole des Mines de Paris, Fontainebleau (France). Geosciences - Reactive Hydrodynamics Group; Guerin, V.; Bataillard, P. [BRGM, Orleans (France). Environment and Process Div.; Centre National de Recherche sur les Sites et Sols Pollues, Douai (France); Laboudigue, A. [Ecole des Mines de Douai (France). Environmental and Civil Engineering; Centre National de Recherche sur les Sites et Sols Pollues, Douai (France)

2007-08-15

Background. Landfill deposits of contaminated, dredged sediments are subject to chemical alteration and especially to oxidation processes. Accordingly, sulphides are gradually oxidized leading to the formation of secondary phases and associated metals could become mobile and redistributed among the sediment components, such as carbonates, clay and freshly precipitated (hydr)oxides. Once mobilised, metals could represent a hazard for the environment and especially for drinking water supply facilities. Methods. In the present study, leaching experiments have been carried out on a dredged sediment to study metal mobilisation after 5 years of field aging. First, kinetic batch tests allowed one to evaluate the impact of solid-liquid contact time and to determine the kinetic parameters. Secondly, two types of dynamic experiments have been conducted: dynamic flush reactor and column leach test to evaluate the impact of solution renewing by excluding or not excluding the transport processes, respectively. In order to evaluate the impact of calcium on the metal mobilisation, the column leaching test is conducted with pure water and Ca(NO{sub 3}){sub 2} solution, at the beginning and at the end of the injection, respectively. Geochemical and reactive transport modelling of the experiments was performed using the geochemical code CHESS and the reactive transport model HYTEC. Results and Discussion. The studied sediment is complex with numerous reactive phases such as sulphides, (hydr)oxides, organic matter, phyllosilicates. All leaching tests highlight that zinc and cadmium are mobilised in significant concentrations and lead remains insoluble. A conceptual geochemical model of the sediment has been built to allow simulations of the whole experiments, based on a single, coherent phase description and parameter set. Simulations of the batch, flush and column experiments were performed taking into account the major reaction-controlling mechanisms including, among others, p

Energy Materials Center at Cornell: Final Report

Energy Technology Data Exchange (ETDEWEB)

Abruña, Héctor [Cornell Univ., Ithaca, NY (United States); Mutolo, Paul F [Cornell Univ., Ithaca, NY (United States)

2015-01-02

The mission of the Energy Materials Center at Cornell (emc²) was to achieve a detailed understanding, via a combination of synthesis of new materials, experimental and computational approaches, of how the nature, structure, and dynamics of nanostructured interfaces affect energy conversion and storage with emphasis on fuel cells, batteries and supercapacitors. Our research on these systems was organized around a full system strategy for; the development and improved performance of materials for both electrodes at which storage or conversion occurs; understanding their internal interfaces, such as SEI layers in batteries and electrocatalyst supports in fuel cells, and methods for structuring them to enable high mass transport as well as high ionic and electronic conductivity; development of ion-conducting electrolytes for batteries and fuel cells (separately) and other separator components, as needed; and development of methods for the characterization of these systems under operating conditions (operando methods) Generally, our work took industry and DOE report findings of current materials as a point of departure to focus on novel material sets for improved performance. In addition, some of our work focused on studying existing materials, for example observing battery solvent degradation, fuel cell catalyst coarsening or monitoring lithium dendrite growth, employing in operando methods developed within the center.

Physicochemical and biological characterisation of different dredged sediment deposit sites in France

International Nuclear Information System (INIS)

Capilla, Xavier; Schwartz, Christophe; Bedell, Jean-Philippe; Sterckeman, Thibault; Perrodin, Yves; Morel, Jean-Louis

2006-01-01

The aim of this work is to determine sediment properties, metal contents and transfers of Cd and Zn from dredged sediments to plants. To this end 10 deposit sites with different contexts were visited in France. The main agronomic characteristics and metal contents for surface soil layers were measured, the plant species present at the sites, such as Brassicaceae and Fabaceae, were listed, and the distribution of their root systems described. Soil characteristics such as available P (Olsen) varied between sites, with values ranging from 0.01 to 0.49 g kg -1 . Total contents and enrichment factors were studied, highlighting metal contamination in most of the sites. Despite carrying out principal component analyses, it was not possible to group deposits by age or geographical localisation. However, deposits could be distinguished as a function of proximity of industrial facilities, sediment grain size and carbonate content. Associations between metals were also highlighted: (1) Cd, Pb and Zn, and (2) Al, Cr, Cu and Fe. Consequently, we propose classifying them as technogenic anthrosols. - The term technogenic arthrosols is suggested

Physicochemical and biological characterisation of different dredged sediment deposit sites in France

Energy Technology Data Exchange (ETDEWEB)

Capilla, Xavier [Laboratoire des Sciences de l' Environnement a l' ENTPE, Rue Maurice Audin, 69 518 Vaulx-en-Velin Cedex (France); Schwartz, Christophe [Laboratoire Sols et Environnement, INPL (ENSAIA)/INRA UMR 1120, 2 avenue de la foret de Haye, BP 172, 54 505 Vandoeuvre les Nancy (France); Bedell, Jean-Philippe [Laboratoire des Sciences de l' Environnement a l' ENTPE, Rue Maurice Audin, 69 518 Vaulx-en-Velin Cedex (France)]. E-mail: bedell@entpe.fr; Sterckeman, Thibault [Laboratoire Sols et Environnement, INPL (ENSAIA)/INRA UMR 1120, 2 avenue de la foret de Haye, BP 172, 54 505 Vandoeuvre les Nancy (France); Perrodin, Yves [Laboratoire des Sciences de l' Environnement a l' ENTPE, Rue Maurice Audin, 69 518 Vaulx-en-Velin Cedex (France); Morel, Jean-Louis [Laboratoire Sols et Environnement, INPL (ENSAIA)/INRA UMR 1120, 2 avenue de la foret de Haye, BP 172, 54 505 Vandoeuvre les Nancy (France)

2006-09-15

The aim of this work is to determine sediment properties, metal contents and transfers of Cd and Zn from dredged sediments to plants. To this end 10 deposit sites with different contexts were visited in France. The main agronomic characteristics and metal contents for surface soil layers were measured, the plant species present at the sites, such as Brassicaceae and Fabaceae, were listed, and the distribution of their root systems described. Soil characteristics such as available P (Olsen) varied between sites, with values ranging from 0.01 to 0.49 g kg{sup -1}. Total contents and enrichment factors were studied, highlighting metal contamination in most of the sites. Despite carrying out principal component analyses, it was not possible to group deposits by age or geographical localisation. However, deposits could be distinguished as a function of proximity of industrial facilities, sediment grain size and carbonate content. Associations between metals were also highlighted: (1) Cd, Pb and Zn, and (2) Al, Cr, Cu and Fe. Consequently, we propose classifying them as technogenic anthrosols. - The term technogenic arthrosols is suggested.

Selecting enhancing solutions for electrokinetic remediation of dredged sediments polluted with fuel.

Science.gov (United States)

Rozas, F; Castellote, M

2015-03-15

In this paper a procedure for selecting the enhancing solutions in electrokinetic remediation experiments is proposed. For this purpose, dredged marine sediment was contaminated with fuel, and a total of 22 different experimental conditions were tested, analysing the influence of different enhancing solutions by using three commercial non-ionic surfactants, one bio-surfactant, one chelating agent, and one weak acid. Characterisation, microelectrophoretic and electrokinetic remediation trials were carried out. The results are explained on the basis of the interactions between the fuel, the enhancing electrolytes and the matrix. For one specific system, the electrophoretic zeta potential, (ζ), of the contaminated matrix in the solution was found to be related to the electroosmotic averaged ζ in the experiment and not to the efficiency in the extraction. This later was correlated to a parameter accounting for both contributions, the contaminant and the enhancing solution, calculated on the basis of differences in the electrophoretic ζ in different conditions which has allowed to propose a methodology for selection of enhancing solutions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Dredging Operations Technical Support Program. Evaluation of the 1980 Capping Operations at the Experimental Mud Dump Site, New York Bight Apex.

Science.gov (United States)

1983-10-01

Christiaensen Basin e. NW Quad.-Dredge I4at’l Dump Site ( DMD ) f. 1 naut. mi. due W of DM0 Site - o . Stock Population from Cape Kay x. Capping Site (DM0...was 0.5 ppm. Cadmium contamination of the marine environment can be traced to a K wide range of industrial sources, including photography, lithography ...DDT,.in (birds interferes with calcium metabolism and results in thin egg shells, thereby increasing mortality among unhatched birds. Butler (1972

Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Gulf of Mexico). COMMON RANGIA.

Science.gov (United States)

1985-04-01

manufacture (Arndt 1976). Of the material dredged of glass, chemicals, chicken and cattle in 1967, an estimated 12.2 million tons feed, wallboard, and...Clam shells poultry grit, cattle roughage, filter are harvested by large commercial material, and whiting (pigment). hydraulic dredges. By far the...non-selective filter feeders orange coloration and effecting (Darnell 1958; Olsen 1976a) ingesting castration . Only large clams are large quantities

Mitigation and enhancement techniques for the Upper Mississippi River system and other large river systems

Science.gov (United States)

Schnick, Rosalie A.; Morton, John M.; Mochalski, Jeffrey C.; Beall, Jonathan T.

1982-01-01

Extensive information is provided on techniques that can reduce or eliminate the negative impact of man's activities (particularly those related to navigation) on large river systems, with special reference to the Upper Mississippi River. These techniques should help resource managers who are concerned with such river systems to establish sound environmental programs. Discussion of each technique or group of techniques include (1) situation to be mitigated or enhanced; (2) description of technique; (3) impacts on the environment; (4) costs; and (5) evaluation for use on the Upper Mississippi River Systems. The techniques are divided into four primary categories: Bank Stabilization Techniques, Dredging and Disposal of Dredged Material, Fishery Management Techniques, and Wildlife Management Techniques. Because techniques have been grouped by function, rather than by structure, some structures are discussed in several contexts. For example, gabions are discussed for use in revetments, river training structures, and breakwaters. The measures covered under Bank Stabilization Techniques include the use of riprap revetments, other revetments, bulkheads, river training structures, breakwater structures, chemical soil stabilizers, erosion-control mattings, and filter fabrics; the planting of vegetation; the creation of islands; the creation of berms or enrichment of beaches; and the control of water level and boat traffic. The discussions of Dredging and the Disposal of Dredged Material consider dredges, dredging methods, and disposal of dredged material. The following subjects are considered under Fishery Management Techniques: fish attractors; spawning structures; nursery ponds, coves, and marshes; fish screens and barriers; fish passage; water control structures; management of water levels and flows; wing dam modification; side channel modification; aeration techniques; control of nuisance aquatic plants; and manipulated of fish populations. Wildlife Management

Electroceramic functional gradient materials. Final report 1995 - 1998

Energy Technology Data Exchange (ETDEWEB)

Toft Soerensen, O. [ed.

1999-10-01

In this programme the research and development is focused on electroceramic materials, which are of direct interest for the Danish producers of electronic components (AMP Danmark) and ceramic gas sensors (PBI-Dansensor) as well as companies involved in development of fuel cells (Haldor Topsoee). The R and D work has been focused on strategic materials research, both application oriented and more basic research, and on development of new techniques for fabrication of EFGM (Electroceramic Functional Gradient Materials) of three types: LC circuit materials (electronic noise filters), oxides for electrochemical reactors and solid oxide fuel cell applications (SOFC) and materials (semiconductors, oxygen ion conductors) for oxygen sensors. This work has been carried out in five projects: 1) Integrated filter components; 2) Electrochemical reactor materials; 3) Oxygen sensors based on semiconductors and oxygen ion conductors; 4) Interface models - synthesis and characterisation; 5) Suppression of cracking in multilayered ceramic materials. (EHS)

Quantum Materials at the Nanoscale - Final Report

Energy Technology Data Exchange (ETDEWEB)

Cooper, Stephen Lance [Univ. of Illinois, Urbana, IL (United States). Dept. of Physics

2016-01-11

The central aim of the Quantum Materials at the Nanoscale (QMN) cluster was to understand and control collective behavior involving the interplay of spins, orbitals, and charges, which governs many scientifically interesting and technologically important phenomena in numerous complex materials. Because these phenomena involve various competing interactions, and influence properties on many different length and energy scales in complex materials, tackling this important area of study motivated a collaborative effort that combined the diverse capabilities of QMN cluster experimentalists, the essential theoretical analysis provided by QMN cluster theorists, and the outstanding facilities and staff of the FSMRL. During the funding period 2007-2014, the DOE cluster grant for the Quantum Materials at the Nanoscale (QMN) cluster supported, at various times, 15 different faculty members (14 in Physics and 1 in Materials Science and Engineering), 7 postdoctoral research associates, and 57 physics and materials science PhD students. 41 of these PhD students have since graduated and have gone on to a variety of advanced technical positions at universities, industries, and national labs: 25 obtained postdoctoral positions at universities (14), industrial labs (2 at IBM), DOE national facilities (3 at Argonne National Laboratory, 1 at Brookhaven National Lab, 1 at Lawrence Berkeley National Lab, and 1 at Sandia National Lab), and other federal facilities (2 at NIST); 13 took various industrial positions, including positions at Intel (5), Quantum Design (1), Lasque Industries (1), Amazon (1), Bloomberg (1), and J.P. Morgan (1). Thus, the QMN grant provided the essential support for training a large number of technically advanced personnel who have now entered key national facilities, industries, and institutions. Additionally, during the period 2007-2015, the QMN cluster produced 159 publications (see pages 14-23), including 23 papers published in Physical Review Letters; 16

The pathways of C: from AGB stars, to the Interstellar Medium, and finally into the protoplanetary disk

Science.gov (United States)

Trigo-Rodriguez, J. M.; Garcia-Hernandez, D. A.

2011-05-01

The origin, and role of C in the formation of first solar system aggregates is described. Stellar grains evidence demonstrates that Asymptotic Giant Branch (AGB) stars were nearby to the solar nebula at the time of solar system formation. Such stars continue to burn H and He in shells that surround the C-O core. During their evolution, flashes occur in the He shell and the C, and O produced are eventually dredged up into the star's envelop and then to the stellar surface, and finally masively ejected to the interstellar medium (IM). Once in a molecular cloud, the electrophilicity of C makes this element reactable with the surrounding gas to produce different molecular species. Primitive meteorites, particularly these known as chondrites, preserved primeval materials of the disk. The abundances of short-lived radionuclides (SLN), inferred to have been present in the early solar system (ESS), are a constraint on the birth and early evolution of the solar system as their relatively short half lives do not allow the observed abundances to be explained by galactic chemical evolution processes. We present a model of a 6.5 solar masses star of solar metallicity that simultaneously match the abundances of SLNs inferred to have been present in the ESS by using a dilution factor of 1 part of AGB material per 300 parts of original solar nebula material, and taking into account a time interval between injection of SLNs and consolidation of chondrites equal to 0.53 Myr [2]. Such a polluting source does not overproduce 53Mn, as supernova models do, and only marginally affects isotopic ratios of stable elements. The AGB stars released O- and C-rich gas with important oxidizing implications to first solar system materials as recently detected in circumstellar environments [3]. REF: [1] Lada C.J. and Lada E.A. 2003. Ann. Rev. A&A. 41: 57; [2] Trigo-Rodriguez J.M. et al. 2009. MAPS 44: 627; [3] Decin L. et al. 2010. Nature 467: 64.

Secondary environmental impacts of remedial alternatives for sediment contaminated with hydrophobic organic contaminants.

Science.gov (United States)

Choi, Yongju; Thompson, Jay M; Lin, Diana; Cho, Yeo-Myoung; Ismail, Niveen S; Hsieh, Ching-Hong; Luthy, Richard G

2016-03-05

This study evaluates secondary environmental impacts of various remedial alternatives for sediment contaminated with hydrophobic organic contaminants using life cycle assessment (LCA). Three alternatives including two conventional methods, dredge-and-fill and capping, and an innovative sediment treatment technique, in-situ activated carbon (AC) amendment, are compared for secondary environmental impacts by a case study for a site at Hunters Point Shipyard, San Francisco, CA. The LCA results show that capping generates substantially smaller impacts than dredge-and-fill and in-situ amendment using coal-based virgin AC. The secondary impacts from in-situ AC amendment can be reduced effectively by using recycled or wood-based virgin AC as production of these materials causes much smaller impacts than coal-based virgin AC. The secondary environmental impacts are highly sensitive to the dredged amount and the distance to a disposal site for dredging, the capping thickness and the distance to the cap materials for capping, and the AC dose for in-situ AC amendment. Based on the analysis, this study identifies strategies to minimize secondary impacts caused by different remediation activities: optimize the dredged amount, the capping thickness, or the AC dose by extensive site assessments, obtain source materials from local sites, and use recycled or bio-based AC. Copyright © 2015 Elsevier B.V. All rights reserved.

Multiphase CFD modeling of nearfield fate of sediment plumes

DEFF Research Database (Denmark)

Saremi, Sina; Hjelmager Jensen, Jacob

2014-01-01

Disposal of dredged material and the overflow discharge during the dredging activities is a matter of concern due to the potential risks imposed by the plumes on surrounding marine environment. This gives rise to accurately prediction of the fate of the sediment plumes released in ambient waters...

Cladding and Structural Materials for Advanced Nuclear Energy Systems Final Report

International Nuclear Information System (INIS)

Was, G.S.; Allen, T.R.; Ila, D.; Levi, C.; Morgan, D.; Motta, A.; Wang, L.; Wirth, B.

2011-01-01

The goal of this consortium is to address key materials issues in the most promising advanced reactor concepts that have yet to be resolved or that are beyond the existing experience base of dose or burnup. The research program consists of three major thrusts: (1) high-dose radiation stability of advanced fast reactor fuel cladding alloys, (2) irradiation creep at high temperature, and (3) innovative cladding concepts embodying functionally-graded barrier materials. This NERI-Consortium final report represents the collective efforts of a large number of individuals over a period of three and a half years and included 9 PIs, 4 scientists, 3 post-docs and 12 students from the seven participating institutions and 8 partners from 5 national laboratories and 3 industrial institutions (see table). University participants met semi-annually and participants and partners met annually for meetings lasting 2-3 days and designed to disseminate and discuss results, update partners, address outstanding issues and maintain focus and direction toward achieving the objectives of the program. The participants felt that this was a highly successful program to address broader issues that can only be done by the assembly of a range of talent and capabilities at a more substantial funding level than the traditional NERI or NEUP grant. As evidence of the success, this group, collectively, has published 20 articles in archival journals and made 57 presentations at international conferences on the results of this consortium.

Evaluation of Novel Semiconductor Materials Potentially Useful in Solar Cells: Cooperative Research and Development Final Report, CRADA number CRD-06-00172

Energy Technology Data Exchange (ETDEWEB)

Geisz, J.

2010-07-01

Evaluation of novel semiconductor materials potentially useful in solar cells. NREL will fabricate, test and analyze solar cells from EpiWorks' wafers produced in 2-3 separate growth campaigns. NREL will also characterize material from 2-3 separate EpiWorks material development campaigns. Finally, NREL will visit EpiWorks and help establish any necessary process, such as spectral CV measurements and III-V on Si metalization processes and help validate solar cell designs and performance.

Concept and Idea-Project for Yugoslav Low and Intermediate level Radioactive Waste Materials Final Disposal Facility

International Nuclear Information System (INIS)

Peric, A.

1997-01-01

Encapsulation of rad waste in a mortar matrix and displacement of such solidified waste forms into the shallow land burial system, engineered trench system type is suggested concept for the final disposal of low and intermediate level rad waste. The mortar-rad waste mixtures are cured in containers of either concrete or metal for an appropriate period of time, after which solidified rad waste-mortar monoliths are then placed in the engineered trench system, parallelepiped honeycomb structure. Trench consists of vertical barrier-walls, bottom barrier-floors, surface barrier-caps and permeable-reactive walls. Surroundings of the trench consists of buffer barrier materials, mainly clay. Each segment of the trench is equipped with the independent drainage system, as a part of the main drainage. Encapsulation of each filled trench honeycomb segment is performed with concrete cap. Completed trench is covered with impermeable plastic foil and soil leaner, preferably clay. Paper presents an overview of the final disposal facility engineered trench system type. Advantages in comparison with other types of final disposal system are given. (author)

78 FR 47635 - Endangered and Threatened Species; Designation of Critical Habitat for Yelloweye Rockfish, Canary...

Science.gov (United States)

2013-08-06

...) dredging and disposal of dredged material; (3) pollution and runoff; (4) underwater construction and..., at the northern tip of Whidbey Island. Pollution and runoff are also concerns in this basin, mostly... areas deeper than 98 ft (30 m) along Possession Point, Admiralty Inlet and the rims of Puget Sound...

'Global change' impact of inter-annual variation in water discharge as a driving factor to dredging and spoil disposal in the river Rhine system and of turbidity in the Wadden Sea

NARCIS (Netherlands)

de Jonge, V.N.; de Jong, D.J.

2002-01-01

Between 1970 to 2000, the annual mean suspended matter (SPM) concentrations in the Vlie and Marsdiep tidal inlets of the Wadden Sea varied over five times. The present paper examines the possible relationship between SPM in the Wadden Sea and changing river Rhine discharges and dredging operations.

Organic materials for second harmonic generation. Final report

International Nuclear Information System (INIS)

Twieg, R.J.

1985-01-01

Materials were chosen by screening the Cambridge Crystallographic Index for new noncentrosymmetric crystalline compounds, by screening commercially available materials or by synthesis of unique new substances. Measurements were then made on the powder form of these materials. Langmuir-Blodgett films were deposited and studied. In addition to the above studies, a computer program was developed to calculate (hyper) polarizabilities of organic molecules and thus aid in the selection of materials for testing. The nonlinear molecules have been divided into three classes according to absorption cutoff: 400 to 500 nm, 300 to 400 nm, and 200 to 300 nm. 108 refs., 7 tabs

Organic materials for second harmonic generation. Final report

Energy Technology Data Exchange (ETDEWEB)

Twieg, R.J. (comp.)

1985-03-31

Materials were chosen by screening the Cambridge Crystallographic Index for new noncentrosymmetric crystalline compounds, by screening commercially available materials or by synthesis of unique new substances. Measurements were then made on the powder form of these materials. Langmuir-Blodgett films were deposited and studied. In addition to the above studies, a computer program was developed to calculate (hyper) polarizabilities of organic molecules and thus aid in the selection of materials for testing. The nonlinear molecules have been divided into three classes according to absorption cutoff: 400 to 500 nm, 300 to 400 nm, and 200 to 300 nm. 108 refs., 7 tabs. (WRF)

Transport of low-level radioactive soil at deep-ocean disposal site

International Nuclear Information System (INIS)

Abdelrhman, M.A.

1993-01-01

This discussion highlights the impact of treating disposed material as barge loads, instead of as single particles. The specific objectives of this discussion are: to present the effect of initial plume dynamics on water column exposure time; and to qualitatively show the effect of horizontal diffusion of particulates in a water column and bed exposure to particulates. A model for instantaneous release of dredged material from a hopper dredge is adapted to illustrate these effects

Asbestos-Containing Materials in Schools; Final Rule and Notice. Part III: Environmental Protection Agency. 40 CFR Part 763.

Science.gov (United States)

Federal Register, 1987

1987-01-01

The Environmental Protection Agency (EPA) has issued a final rule under the Toxic Substance Control Act (TSCA) to require all local education agencies (LEAs) to identify asbestos-containing materials in their school buildings and take appropriate action to control release of asbestos fibers. The LEAs are required to describe their activities in…

Development and characterization of semiconductor materials by ion beams. Final report of a co-ordinated research project

International Nuclear Information System (INIS)

2002-06-01

This CRP was recommended by the Consultants meeting on Ion Beam Techniques Applied to Semiconductor and Related Advanced Materials, held in April 1997 in Vienna. The consultants proposed to have a CRP in the field of application of MeV ion beams for the development and characterization of semiconductor materials. The CRP was approved and a first RCM was held in Vienna between 2-5 June 1998, in order to stimulate ideas and to promote collaborations among CRP participants. The goals and practical outcomes of the CRP were defined and several specific topics were identified including: optoelectronic characterization of semiconductor materials and devices by ion microbeams, characterization of thin films, defect transformations in semiconductors, light element analysis. One important recommendation was that sample exchanges among different laboratories be strongly encouraged. The participants presented individual activities on their projects, all subjects of research were identified and linked with approved individual projects. Collaboration among the participants was discussed and established. Some modifications to work plans were adopted. As proposed during the first RCM, the final RCM was held at the Ruder Boskovic Institute, Zagreb, Croatia, between 25 and 29 September 2000, with the purpose of reviewing/discussing the results achieved during the course of the CRP and to prepare a draft of the final report and associated publication. This document contains summary of the CRP and ten individual reports presented by participants. Each of the reports has been indexed separately

Metal transfer to plants grown on a dredged sediment: use of radioactive isotope 203Hg and titanium

International Nuclear Information System (INIS)

Caille, Nathalie; Vauleon, Clotilde; Leyval, Corinne; Morel, Jean-Louis

2005-01-01

Improperly disposed of dredged sediments contaminated with metals may induce long-term leaching and an increase of metal concentrations in ground waters and vegetal cover plants. The objective of the study was to quantify the sediment-to-plant transfer of Cu, Pb, Hg and Zn with a particular focus on the pathway of Hg and to determine whether the establishment of vegetal cover modifies the metal availability. A pot experiment with rape (Brassica napus), cabbage (Brassica oleraccea) and red fescue (Festuca rubra) was set up using a sediment first spiked with the radioisotope 203 Hg. Zinc concentrations (197-543 mg kg -1 DM) in leaves were higher than Cu concentration (197-543 mg kg -1 DM), Pb concentration (2.3-2.6 mg kg -1 DM) and Hg concentration (0.9-1.7 mg kg -1 DM). Leaves-to-sediment ratios decreased as follows: Zn>Cu>Hg>Pb. According to Ti measurements, metal contamination by dry deposition was less than 1%. Mercury concentration in plant leaves was higher than European and French thresholds. Foliar absorption of volatile Hg was a major pathway for Hg contamination with a root absorption of Hg higher in rape than in cabbage and red fescue. Growth of each species increased Cu solubility. Zinc solubility was increased only in the presence of rape. The highest increase of Cu solubility was observed for red fescue whereas this species largely decreased Zn solubility. Dissolved organic carbon (DOC) measurements suggested that Cu solubilisation could result from organic matter or release of natural plant exudates. Dissolved inorganic carbon (DIC) measures suggested that the high Zn solubility in the presence of rape could originate from a generation of acidity in rape rhizosphere and a subsequent dissolution of calcium carbonates. Consequently, emission of volatile Hg from contaminated dredged sediments and also the potential increase of metal solubility by a vegetal cover of grass when used in phytostabilisation must be taken into account by decision makers

Metal transfer to plants grown on a dredged sediment: use of radioactive isotope 203Hg and titanium.

Science.gov (United States)

Caille, Nathalie; Vauleon, Clotilde; Leyval, Corinne; Morel, Jean-Louis

2005-04-01

Improperly disposed of dredged sediments contaminated with metals may induce long-term leaching and an increase of metal concentrations in ground waters and vegetal cover plants. The objective of the study was to quantify the sediment-to-plant transfer of Cu, Pb, Hg and Zn with a particular focus on the pathway of Hg and to determine whether the establishment of vegetal cover modifies the metal availability. A pot experiment with rape (Brassica napus), cabbage (Brassica oleraccea) and red fescue (Festuca rubra) was set up using a sediment first spiked with the radioisotope 203Hg. Zinc concentrations (197-543 mg kg(-1) DM) in leaves were higher than Cu concentration (197-543 mg kg(-1) DM), Pb concentration (2.3-2.6 mg kg(-1) DM) and Hg concentration (0.9-1.7 mg kg(-1) DM). Leaves-to-sediment ratios decreased as follows: Zn > Cu > Hg > Pb. According to Ti measurements, metal contamination by dry deposition was less than 1%. Mercury concentration in plant leaves was higher than European and French thresholds. Foliar absorption of volatile Hg was a major pathway for Hg contamination with a root absorption of Hg higher in rape than in cabbage and red fescue. Growth of each species increased Cu solubility. Zinc solubility was increased only in the presence of rape. The highest increase of Cu solubility was observed for red fescue whereas this species largely decreased Zn solubility. Dissolved organic carbon (DOC) measurements suggested that Cu solubilisation could result from organic matter or release of natural plant exudates. Dissolved inorganic carbon (DIC) measures suggested that the high Zn solubility in the presence of rape could originate from a generation of acidity in rape rhizosphere and a subsequent dissolution of calcium carbonates. Consequently, emission of volatile Hg from contaminated dredged sediments and also the potential increase of metal solubility by a vegetal cover of grass when used in phytostabilisation must be taken into account by decision

Final Report: Scintillator Materials for Medical Applications, December 1, 1997 - November 30, 1999

International Nuclear Information System (INIS)

Lempicki, A.; Brecher, C.; Wojtowicz, A.J.; Szupryczynski, P.

2000-01-01

From the very beginning of our program we regarded the understanding of the scintillation mechanism as our primary mission. If in addition this understanding could lead to the discovery of a new material, so much the better. When we began this work some nine years ago, the theoretical basis for the scintillation phenomenon was in disarray. The initial and final steps were reasonably well characterized, but there was no consensus on the crucial intermediate, the transfer of energy from the lattice to the emitting center. In the over 40 publications that resulted from this program, we demonstrated that despite the highly insulating nature of the hosts and the great magnitude of the band gap, the primary means of transport is through mobile charge carriers and their sequential capture by the emitting center. Although radical at the time, this picture is now generally accepted throughout the field. Subsequently, we also recognized the critical role that trapping centers localized at lattice defects can play in the process, not merely as passive sources of loss but as active participants in the kinetics. In this sense shallow traps can wreak more havoc than deep ones, impeding the rate by which carriers can reach the emitting centers and seriously slowing the resulting decay. And we established low-temperature thermoluminescence as a comprehensive tool for quantizing these effects. As for new and better materials, our work also had an impact. We were among the first to recognize the potential of LuAlO 3 (lutetium aluminum perovskite, or LuAP) as a detector for PET applications. Although this material has not supplanted LuSiO 5 (lutetium oxysilicate, or LSO) in terms of light output or absence of afterglow, LuAP still exhibits by far the highest figure of merit (light output divided by decay time) of any scintillator material currently known. Our work has also bought into stark view the dismaying realization of just how improbable it is that a material will ever be found

Application of the final flotation waste for obtaining the glass-ceramic materials

Directory of Open Access Journals (Sweden)

Cocić Mira

2017-01-01

Full Text Available This work describes the investigation of the final flotation waste (FFW, originating from the RTB Bor Company (Serbia, as the main component for the production of glass-ceramic materials. The glass-ceramics was synthesized by the sintering of FFW, mixtures of FFW with basalt (10%, 20%, and 40%, and mixtures of FFW with tuff (20% and 40%. The sintering was conducted at the different temperatures and with the different time duration in order to find the optimal composition and conditions for crystallization. The increase of temperature, from 1100 to 1480°C, and sintering time, from 4 to 6h resulted in a higher content of hematite crystal in the obtained glass-ceramic (up to 44%. The glass-ceramics sintered from pure FFW (1080°C/36h has good mechanical properties, such as high propagation speed (4500 m/s and hardness (10800 MPa, as well as very good thermal stability. The glass-ceramics obtained from mixtures shows weaker mechanical properties compared to that obtained from pure FFW. The mixtures of FFW with tuff have a significantly lower bulk density compared to other obtained glass-ceramics. Our results indicate that FFW can be applied as a basis for obtaining the construction materials. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 176010: Composition, genesis, application, and contribution to the environmental sustainability

Dungeness Crab Dredging Entrainment Studies in the Lower Columbia River, 2002 – 2004: Loss Projections, Salinity Model, and Scenario Analysis

Energy Technology Data Exchange (ETDEWEB)

Pearson, Walter H.; Williams, Greg D.; Skalski, John R.

2005-01-01

Dungeness crab studies conducted in 2002 for the Portland District of the U.S. Army Corps of Engineers (Corps) constituted a major step forward in quantifying crab entrainment through statistical projections of adult equivalent loss (AEL) and loss to the fishery (LF) from proposed construction and maintenance dredging in the Columbia River navigation channel (Pearson et al. 2002, 2003). These studies also examined the influence of bottom salinity on crab abundance and entrainment rates. Additional sampling was conducted in 2004 to tighten loss projections, further develop the crab salinity model, and apply the model to assess correlations of entrainment rates and projected losses with seasonal salinity changes.

radiochemical studies on the binding of humic materials with toxic elements and compounds

International Nuclear Information System (INIS)

Afifi, D.M.I.

2001-01-01

industrial nations produce several billion tons of waste every year . this figure will increase as both population and industrial growth increase. there are many kinds of waste, including refinery waste, which consists of hydrocarbons, heavy metals, metal catalysts and caustic solution; dredge spoils, some of which are highly polluted and cntains substances potentially hazardous to human health or the marine ecosystem; chemical waste such as insecticides, pesticides, other complex chemicals and heavy metals; radioactive waste and agricultural waste, anmd most of them are extremely hazardous and harmful to the marine ecosystem and its inhabitants.the aim of this thesis is to study the binding of humic materials with toxic elements and compounds

Estimating seabed pressure from demersal trawls, seines, and dredges based on gear design and dimensions

DEFF Research Database (Denmark)

Eigaard, Ole Ritzau; Bastardie, Francois; Breen, Mike

2016-01-01

such as logbook data. Here, we take a different approach starting from the gear itself (design and dimensions) to estimate the physical interactions with the seabed at the level of the individual fishing operation. We defined 14 distinct towed gear groups in European waters (eight otter trawl groups, three beam...... trawl groups, two demersal seine groups, and one dredge group), for which we established gear “footprints”. The footprint of a gear is defined as the relative contribution from individual larger gear components, such as trawl doors, sweeps, and groundgear, to the total area and severity of the gear...... to enable the prediction of gear footprint area and sediment penetration from vessel size. Application of these relationships with average vessel sizes and towing speeds provided hourly swept-area estimates by métier. Scottish seining has the largest overall gear footprint of ∼1.6 km2 h−1 of which 0.08 km2...

Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

Energy Technology Data Exchange (ETDEWEB)

Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Industrial and Medical Nuclear Safety; Tingle, W. [Dept. of Environment, Health, and Natural Resources, Raleigh, NC (United States). Div. of Radiation Protection

1997-05-01

As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ``Applications for the Use of Sealed Sources in Portable Gauging Devices,`` and in NMSs Policy and guidance Directive 2-07, ``Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.`` This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications.

Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

International Nuclear Information System (INIS)

Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A.; Tingle, W.

1997-05-01

As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ''Applications for the Use of Sealed Sources in Portable Gauging Devices,'' and in NMSs Policy and guidance Directive 2-07, ''Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.'' This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications

Final Report

Energy Technology Data Exchange (ETDEWEB)

Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-08-07

This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.

Study of hydrological and geochemical data on materials for the final cover of subsurface storage sites

International Nuclear Information System (INIS)

Sauter, M.M.; Barres, M.; Faby, J.

1987-01-01

The European Research program includes studies on highly watertight materials likely to sait the final cover of low-level and intermediate-level waste disposal. The experimental equipment is composed of a 26 sq. m collector placed on an inclined plane, just below the material to be tested and connected by means of a gutter with a measuring room where the infiltration waters flow rate is steadily measured. On the surface of the tumulus, a 300 sq.m inclined plane permits the measure of the running off water. The recording raingauge completes the device. Water vapour pressures are measured at different depths within the material. Total watercontents are registered along vertical profils using a special neutron logging tool. Numerous physico-chemical measures are carried out on the infiltration and running off waters: pH, Eh, temperature, dissolved oxygen, conductivity, turbidity and major anions and cations. Two materials have been tested with this device: - weathered schists; Compacted clay. The first material showed that, on average over the six months period of measurements, the overall rainfall brokedown into 11% running waters, 13% infiltration and 76% evaporation because infiltration accounts for a large part of rainfall. It resulted in a complete saturation of the material during certain periods of the year. Humidity measurements performed at different places pointed out large heterogeneities inside the material. It is worth noting that, despite some problems due to calibration, the whole instrumentation located in the measuring room worked rather well and permitted to demonstate the bad qualities of the material. The second material was subsequently covered by a 20 cm thick layer made of a mixture of sand in order to regularize water infiltration under the soil vegetation constituted by a special grass growing

Coastal structures, waste materials and fishery enhancement

Energy Technology Data Exchange (ETDEWEB)

Collins, K.J.; Jensen, A.C.; Lockwood, A.P.M.; Lockwood, S.J. [University of Southampton, Southampton (United Kingdom). Dept. of Oceanography

1994-09-01

Current UK practice relating to the disposal of material at sea is reviewed. The use of stabilization technology relating to bulk waste materials, coal ash, oil ash and incinerator ash is discussed. The extension of this technology to inert minestone waste and tailings, contaminated dredged sediments and phosphogypsum is explored. Uses of stabilized wastes are considered in the areas of habitat restoration, coastal defense and fishery enhancement. It is suggested that rehabilitation of marine dump sites receiving loose waste such as pulverized fuel ash (PFA) could be enhanced by the continued dumping of the material but in a stabilized block form, so creating new habitat diversity. Global warming predictions include sea level rise and increased storm frequency. This is of particular concern along the southern and eastern coasts of the UK. The emphasis of coastal defense is changing from hard seawalls to soft options which include offshore barriers to reduce wave energy reaching the coast. Stabilized waste materials could be included in these and other marine constructions with possible economic benefit. Ministry of Agriculture, Fisheries and Food (MAFF), the regulatory authority in England and Wales for marine disposal/construction, policy regarding marine structures and fishery enhancement is outlined. A case is made for the inclusion of fishery enhancement features in future coastal structures. Examples of the productivity of man-made structures are given. Slight modification of planned structures and inclusion of suitable habitat niches could allow for the cultivation of kelp, molluscs, crustacea and fish.

Estimation of seafloor impact from demersal trawls, seines and dredges based on gear design and dimensions

DEFF Research Database (Denmark)

Eigaard, Ole Ritzau; Bastardie, Francois; Breen, Michael

a different approach using the gear itself (design and dimensions) for understanding and estimation of the physical interactions with the seafloor at the individual fishing operation level. With reference to the métier groupings of EU logbooks, we defined 17 distinct towed gear groups in European waters (11...... otter trawl groups, 3 beam trawl groups, 2 demersal seine groups, and 1 dredge group), for which we established seafloor “footprints”. The footprint of a gear was defined as the relative contribution from individual larger gear components, such as the trawl doors, sweeps and ground gear, to the total...... types based on a review of the scientific literature. For each defined gear group a vessel-size (kW or total length) – gear size (total gear width or circumference) relationship was estimated to enable the prediction of gear footprint area and sediment penetration from vessel size. The implications...

Final report for Assembling Microorganisms into Energy Converting Materials

Energy Technology Data Exchange (ETDEWEB)

Sahin, Ozgur

2018-03-26

The goal of this project was to integrate microorganisms capable of reversible energy transduction in response to changing relative humidity with non-biological materials to create hybrid energy conversion systems. While plants and many other biological organisms have developed structures that are extraordinarily effective in converting changes in relative humidity into mechanical energy, engineered energy transduction systems rarely take advantage of this powerful phenomenon. Rather than developing synthetic materials that can convert changes in relative humidity in to mechanical energy, we developed approaches to assemble bacterial spores into larger materials. These materials can convert energy from evaporation of water in dry atmospheric conditions, which we demonstrated by building energy harvesters from these materials. We have also developed experiments to investigate the interaction of water with the spore material, and to determine how this interaction imposes limits on energy conversion. In addition, we carried out theoretical calculations to investigate the limits imposed by the environmental conditions to the power available in the energy harvesting process. These calculations took into account heat and water vapor transfer in the atmosphere surrounding the spore based materials. Overall, our results suggest that biomolecular materials are promising candidates to convert energy from evaporation.

X-ray Studies of Materials Dynamics at MHATT-CAT Sector 7 , Advanced Photon Source. Final report

International Nuclear Information System (INIS)

Roy Clarke

2006-01-01

This Final Report describes the scientific accomplishments that have been achieved with support from grant DE-FG02-03ER46023 during the period 12/01/02-11/30/05. The funding supported a vigorous scientific program allowing the PI to achieve leadership in a number of important areas. In particular, research carried out during this period has opened way to ultrafast dynamics studies of materials by combining the capabilities of synchrotron radiation with those of ultrafast lasers. This enables the initiation of laser-induced excitations and studies of their subsequent dynamics using laser-pump/x-ray probe techniques. Examples of such excitations include phonons, shock waves, excitons, spin-waves, and polaritons. The breadth of phenomena that can now be studied in the time-domain is very broad, revealing new phenomena and mechanisms that are critical to many applications of materials

75 FR 22524 - Ocean Dumping; Designation of Ocean Dredged Material Disposal Sites Offshore of the Siuslaw River...

Science.gov (United States)

2010-04-29

...://www.regulations.gov or in hard copy during normal business hours for the regional library at the U.S... would expect to revise the SMMP if necessary in the event wave energy projects or other renewable or... create a ``speedbump'' resulting in decreased wave energy and erosion on the beach. The final Sites...

Metal transfer to plants grown on a dredged sediment: use of radioactive isotope {sup 203}Hg and titanium

Energy Technology Data Exchange (ETDEWEB)

Caille, Nathalie [ENSAIA-INRA/INPL, 2 avenue de la Foret de Haye, F-54505 Vandoeuvre-les-Nancy (France); CNRSSP, 930 boulevard Lahure, F-59505 Douai (France); Laboratoire des Interactions Microorganismes-Mineraux-Matiere organique dans les sols, CNRS, 17 rue Notre-Dame des Pauvres, F-54505 Vandoeuvre-les-Nancy (France); Vauleon, Clotilde [CNRSSP, 930 boulevard Lahure, F-59505 Douai (France); Leyval, Corinne [Laboratoire des Interactions Microorganismes-Mineraux-Matiere organique dans les sols, CNRS, 17 rue Notre-Dame des Pauvres, F-54505 Vandoeuvre-les-Nancy (France); Morel, Jean-Louis [ENSAIA-INRA/INPL, 2 avenue de la Foret de Haye, F-54505 Vandoeuvre-les-Nancy (France)]. E-mail: jean-louis.Morel@ensaia.inpl-nancy.fr

2005-04-01

Improperly disposed of dredged sediments contaminated with metals may induce long-term leaching and an increase of metal concentrations in ground waters and vegetal cover plants. The objective of the study was to quantify the sediment-to-plant transfer of Cu, Pb, Hg and Zn with a particular focus on the pathway of Hg and to determine whether the establishment of vegetal cover modifies the metal availability. A pot experiment with rape (Brassica napus), cabbage (Brassica oleraccea) and red fescue (Festuca rubra) was set up using a sediment first spiked with the radioisotope {sup 203}Hg. Zinc concentrations (197-543 mg kg{sup -1} DM) in leaves were higher than Cu concentration (197-543 mg kg{sup -1} DM), Pb concentration (2.3-2.6 mg kg{sup -1} DM) and Hg concentration (0.9-1.7 mg kg{sup -1} DM). Leaves-to-sediment ratios decreased as follows: Zn>Cu>Hg>Pb. According to Ti measurements, metal contamination by dry deposition was less than 1%. Mercury concentration in plant leaves was higher than European and French thresholds. Foliar absorption of volatile Hg was a major pathway for Hg contamination with a root absorption of Hg higher in rape than in cabbage and red fescue. Growth of each species increased Cu solubility. Zinc solubility was increased only in the presence of rape. The highest increase of Cu solubility was observed for red fescue whereas this species largely decreased Zn solubility. Dissolved organic carbon (DOC) measurements suggested that Cu solubilisation could result from organic matter or release of natural plant exudates. Dissolved inorganic carbon (DIC) measures suggested that the high Zn solubility in the presence of rape could originate from a generation of acidity in rape rhizosphere and a subsequent dissolution of calcium carbonates. Consequently, emission of volatile Hg from contaminated dredged sediments and also the potential increase of metal solubility by a vegetal cover of grass when used in phytostabilisation must be taken into account

Applying Freeze Technology for Characterisation of Liquids, Sludge and Sediment

International Nuclear Information System (INIS)

Eriksson, Jens; Foster, Adam; Lindberg, Maria

2016-01-01

dredging/remediation activities required, as well as a significant reduction in the overall amount of material that must be disposed. With an accurate 3-D model of the contaminated area, the contaminated material can be effectively removed while minimizing the amount of excess non-contaminated material that is also removed during a typical large scale remediation project. The reduction of transportation and disposal costs can be significant for projects that require the removal and disposal of large amounts of material. The same technology can also be scaled up and used to accurately remove contaminated fractions with essentially no cross-contamination with surrounding material. After the necessary characterization activities have been completed, the freeze technology can also be used to remove the contaminated material. Freeze dredging plates have been designed, fabricated and successfully used to complete both small and large scale dredging projects. The advantages of using freeze technology for dredging activities are accuracy and the minimization of cross-contamination or spreading of the contaminated material. Typical dredging techniques will spread the contamination which increases the required dredging activity and the volume of material that must be disposed. Freeze dredging is capable of removing material to a specific depth without disturbing or spreading the contamination or the material surrounding the contamination. The freeze front expansion can be well controlled such that a precise amount of material is extracted each time the freeze dredging activity is performed. Furthermore, by freezing the sludge or sediment, the risk of spilling or spreading the material during collection activities is significantly reduced. During transportation of the remediated material (to a treatment location or for disposal), it is possible to keep the material frozen to insure easy, safe and cost effective transport. In the solid state there is less risk of exposure in case of

An evaluation of technologies for the heavy metal remediation of dredged sediments.

Science.gov (United States)

Mulligan, C N; Yong, R N; Gibbs, B F

2001-07-30

Sediments dewatering is frequently necessary after dredging to remediate and treat contaminants. Methods include draining of the water in lagoons with or without coagulants and flocculants, or using presses or centrifuges. Treatment methods are similar to those used for soil and include pretreatment, physical separation, thermal processes, biological decontamination, stabilization/solidification and washing. However, compared to soil treatment, few remediation techniques have been commercially used for sediments. In this paper, a review of the methods that have been used and an evaluation of developed and developing technologies is made. Sequential extraction technique can be a useful tool for determining metal speciation before and after washing. Solidification/stabilization techniques are successful but significant monitoring is required, since the solidification process can be reversible. In addition, the presence of organics can reduce treatment efficiency. Vitrification is applicable for sediments but expensive. Only if a useful glass product can be sold will this process be economically viable. Thermal processes are only applicable for removal of volatile metals, such as mercury and costs are high. Biological processes are under development and have the potential to be low cost. Since few low cost metal treatment processes for sediments are available, there exists significant demand for further development. Pretreatment may be one of the methods that can reduce costs by reducing the volumes of sediments that need to be treated.

Final report on CCQM-K79: Comparison of value-assigned CRMs and PT materials: Ethanol in aqueous matrix

Science.gov (United States)

Hein, Sebastian; Philipp, Rosemarie; Duewer, David L.; Gasca Aragon, Hugo; Lippa, Katrice A.; Toman, Blaza

2013-01-01

-weighted generalized distance regression was used to establish the key comparison reference function (KCRF) relating the assigned values to the repeatability measurements. On the basis of leave-one-out cross-validation, all of the assigned values for all 27 materials were deemed equivalent at the 95% level of confidence. These materials were used to define the KCRF. Parametric bootstrap Monte Carlo was used to estimate 95% level-of-confidence coverage intervals for the degrees of equivalence of materials, d +/- U95(d), and of the participating NMIs, D +/- U95(D). Because of the very wide range of ethanol mass fraction in the materials, these degrees of equivalence are expressed in percent relative form: %d +/- U95(%d) and %D +/- U95(%D). The median of the absolute values of the %D for the participating NMIs is less than 0.05% with a median U95(%D) of less than 1%. These results demonstrate that the participating NMIs have the ability to correctly value-assign CRMs and proficiency test materials for ethanol in aqueous media and similar measurands. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Properties of container and backfill materials for the final disposal of highly radioactive fission products

International Nuclear Information System (INIS)

Mirschinka, V.

1983-11-01

The qualifications of six metallic alloys to serve as canister materials for an in-can glass smelting process were studied. These alloys are: N 6 1.4864 (X 12NiCrSi3616, Thermax 16/36), No. 2.4816 (NiCr15Fe, Inconel 600), No. 2.4610 (Hastelloy C4), No. 2.4778 (UMCO50), No. 1.5415 (15MO3), No. 1.1005 (ZSH-Spezial). The mechanical properties of any of the six materials at high temperatures were found to be sufficient. The chemical interactions between glass and metal were investigated by glass smelting tests and electron microprobe analyses, showing that chromium as an alloying element of the crucible material may affect the quality of the glass product by causing inhomogeneities and a violent blistering in the glass matrix. The resistance against corrosion by concentrated salt solutions under elevated pressure and temperature similar to final depository conditions was tested showing that the presence of a bentonite suspension in the salt solution reduces the corrosion attack of the metal significantly. Diffusion experiments of salt solutions doted with radioactive isotopes Na-22 and Cl-36 as tracer substances were made to show the retardation behaviour of salt ions in compacted bentonite. However, a long-term barrier effect of the bentonite against salt ion diffusion could not be verified. (orig./HOE)

78 FR 37528 - Intent To Prepare a Draft Supplement to the December 2009 Final Environmental Impact Statement...

Science.gov (United States)

2013-06-21

... modification request includes the consolidation of Phases II-V into one phase (in a single dredging event), the... has reevaluated its financial status and seeks to modify their DA authorization. A key component in...

Anacostia River fringe wetlands restoration project: final report for the five-year monitoring program (2003 through 2007)

Science.gov (United States)

Krafft, Cairn C.; Hammerschlag, Richard S.; Guntenspergen, Glenn R.

2009-01-01

The 6-hectare (ha) freshwater tidal Anacostia River Fringe Wetlands (Fringe Wetlands) were reconstructed along the mainstem of the Anacostia River in Washington, DC (Photograph 1, Figure 1) during the summer of 2003. The Fringe Wetlands consist of two separate planting cells. Fringe A, located adjacent to Lower Kingman Island, on the west bank of the Anacostia River, occupies 1.6 ha; Fringe B, located on the east bank of the Anacostia River, occupies 4.4 ha. This project is the third in a series of freshwater tidal wetland reconstructions on the Anacostia River designed and implemented by the US Army Corps of Engineers (USACE) Baltimore District and District Department of the Environment (DDOE) on lands managed by the National Park Service (NPS). The first was Kenilworth Marsh, reconstructed in 1993 (Syphax and Hammerschlag 2005); the second was Kingman Marsh, reconstructed in 2000 (Hammerschlag et al. 2006). Kenilworth and Kingman were both constructed in low-energy backwaters of the Anacostia. However, the Fringe Wetlands, which were constructed on two pre-existing benches along the high-energy mainstem, required sheet piling to provide protection from erosive impacts of increased flow and volume of water associated with storm events during the establishment phase (Photograph 2). All three projects required the placement of dredged sediment materials to increase elevations enough to support emergent vegetation (Photograph 3). The purpose of all three wetland reconstruction projects was to restore pieces of the once extensive tidal freshwater marsh habitat that bordered the Anacostia River historically, prior to the dredge and fill operations and sea wall installation that took place there in the early to mid-1900's (Photograph 4).

AY 2002-2003 Industry Study: Final Report Strategic Materials

National Research Council Canada - National Science Library

Adams, Karen G

2003-01-01

Strategic materials are those materials, along with research, development, and technology that are critical in ensuring a US competitive advantage, both economically and with respect to national security capabilities...

Disposal of radioactive waste material

International Nuclear Information System (INIS)

Cairns, W.J.; Burton, W.R.

1984-01-01

A method of disposal of radioactive waste consists in disposing the waste in trenches dredged in the sea bed beneath shallow coastal waters. Advantageously selection of the sites for the trenches is governed by the ability of the trenches naturally to fill with silt after disposal. Furthermore, this natural filling can be supplemented by physical filling of the trenches with a blend of absorber for radionuclides and natural boulders. (author)

Promotional materials clearinghouse, year 5 final report 2001-2002

Science.gov (United States)

2002-10-01

The Promotional Materials Clearinghouse is a participant-driven undertaking. All materials currently archived at the Clearinghouse were solicited from transit systems and transportation demand management (TDM) agencies nationwide with marketing manag...

Final IAEA research coordination meeting on plasma-interaction induced erosion of fusion reactor materials. October 9-11, 1995, Vienna, Austria. Summary report

International Nuclear Information System (INIS)

Langley, R.A.

1995-12-01

The proceedings and results of the Final IAEA Research Coordination Meeting on ''Plasma-interaction Induced Erosion of Fusion Reactor Materials'' held on October 9, 10 and 11, 1995 at the IAEA Headquarters in Vienna are briefly described. This report includes a summary of presentations made by the meeting participants, the results of a data survey and needs assessment for the erosion of plasma facing components and in-vessel materials, and recommendations regarding future work. (author). Refs, figs, tabs

Functional Materials for Microsystems: Smart Self-Assembled Photochromic Films: Final Report; FINAL

International Nuclear Information System (INIS)

BURNS, ALAN R.; SASAKI, DARRYL Y.; CARPICK, R.W.; SHELNUTT, JOHN A.; BRINKER, C. JEFFREY

2001-01-01

This project set out to scientifically-tailor ''smart'' interfacial films and 3-D composite nanostructures to exhibit photochromic responses to specific, highly-localized chemical and/or mechanical stimuli, and to integrate them into optical microsystems. The project involved the design of functionalized chromophoric self-assembled materials that possessed intense and environmentally-sensitive optical properties (absorbance, fluorescence) enabling their use as detectors of specific stimuli and transducers when interfaced with optical probes. The conjugated polymer polydiacetylene (PDA) proved to be the most promising material in many respects, although it had some drawbacks concerning reversibility. Throughout his work we used multi-task scanning probes (AFM, NSOM), offering simultaneous optical and interfacial force capabilities, to actuate and characterize the PDA with localized and specific interactions for detailed characterization of physical mechanisms and parameters. In addition to forming high quality mono-, bi-, and tri-layers of PDA via Langmuir-Blodgett deposition, we were successful in using the diacetylene monomer precursor as a surfactant that directed the self-assembly of an ordered, mesostructured inorganic host matrix. Remarkably, the diacetylene was polymerized in the matrix, thus providing a PDA-silica composite. The inorganic matrix serves as a perm-selective barrier to chemical and biological agents and provides structural support for improved material durability in microsystems. Our original goal was to use the composite films as a direct interface with microscale devices as optical elements (e.g., intracavity mirrors, diffraction gratings), taking advantage of the very high sensitivity of device performance to real-time dielectric changes in the films. However, our optical physics colleagues (M. Crawford and S. Kemme) were unsuccessful in these efforts, mainly due to the poor optical quality of the composite films

TBT-contaminated sediments. Treatment in a pilot scale

Energy Technology Data Exchange (ETDEWEB)

Stichnothe, H.; Calmano, W.; Arevalo, E.; Keller, A.; Thoeming, J. [Hamburg Univ. of Technology, Dept. Environmental Science and Technology, Hamburg (Germany)

2005-07-01

Background, aims and scope. Sediments in harbours and nearby shipyards demonstrate widespread contamination with tributyltin (TBT). Therefore, reuse and relocation of dredged material from these locations are prohibited. Even if the international marine organization (IMO) convention concerning TBT-based paints is ratified (champ 2003) the TBT problem in sediments will continue to remain for many years due to the persistence of TBT. Methods. An electrochemical process has been developed to treat polluted sediments. Dredged materials with high and low TBT-contents were studied on a technical and a pilot scale. The treatment process was assessed by chemical analysis and a biotest battery. Additionally, an economic analysis was performed to check the economic feasibility of the process to treat dredged material from two different locations at different operating conditions. Furthermore an up-scaling estimation was performed to evaluate treatment costs at a larger scale, i.e. for a plant having a capacity of 720,000 t/a. Results and discussion. Butyltin species and polycyclic aromatic hydrocarbons (PAH) were decomposed due to electrochemically-induced oxidation, while the treatment did not alter heavy metal and PCB concentrations. The bacteria luminescence test indicated a reduced toxicity after the electrochemical treatment, while the algae growth inhibition test and bacteria contact test did not confirm these results. Based on a small consumer price of Euro 0.12/kWh, treating the high-contaminated sediment in the pilot plant would cost Euro 21/m{sup 3} and Euro 31/m{sup 3} for the low contaminated sediment, respectively. Assuming an industrial consumer price of Euro 0.06/kWh for electricity in an up-scaled process with a capacity of 720,000 t/a, the total treatment costs for the low contaminated sediment would be Euro 13/m{sup 3}. Conclusion. The results of treating dredged material from Bremerhaven and the fine-grained fraction from the METHA plant show that the

Final report on CCQM-K80: Comparison of value-assigned CRMs and PT materials: Creatinine in human serum

Science.gov (United States)

Camara, Johanna E.; Duewer, David L.; Gasca Aragon, Hugo; Lippa, Katrice A.; Toman, Blaza

2013-01-01

regression was used to establish the key comparison reference function (KCRF) relating the assigned values to the repeatability measurements. Parametric bootstrap Monte Carlo was used to estimate 95% level-of-confidence coverage intervals for the degrees of equivalence of materials, d +/- U95(d), and of the participating NMIs, D +/- U95(D). Because of the wide range of creatinine mass fraction in the materials, these degrees of equivalence are expressed in percent relative form: %d +/- U95(%d) and %D +/- U95(%D). On the basis of leave-one-out cross-validation, the assigned values for 16 of the 17 materials were deemed equivalent at the 95% level of confidence. These materials were used to define the KCRF. The excluded material was identified as having a marginally underestimated assigned uncertainty, giving it large and potentially anomalous influence on the KCRF. However, this material's %d of 1.4 +/- 1.5 indicates that it is equivalent with the other materials at the 95% level of confidence. The median |%d| for all 17 of the materials is 0.3 with a median U95(%d) of 1.9. All of these higher-order CRMs for creatinine in human serum are equivalent within their assigned uncertainties. The median |%D| for the participating NMIs is 0.3 with a median U95(%D) of 2.1. These results demonstrate that all participating NMIs have the ability to correctly value-assign CRMs and proficiency test materials for creatinine in human serum and similar measurands. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Chemical Clarification Methods for Confined Dredged Material Disposal.

Science.gov (United States)

1983-07-01

foot second per metre cubic yards 0.7645549 cubic metres Farenheit degrees 5/9 Celsius degrees or Kelvins* feet 0.3048 metres feet per minute 0.3048...unknown in freshwater environments, use zero S.G. = specific gravity of solids; use 2.67 if unknown Wt. H20 [(weight of wet sample and dish, g...62.4 lb/ft v = average velocity, ft/sec Ps= absolute viscosity, 2.36 x 10-5 at 60F The duration t of the mixing is determined by t =L (6) v The net

Electrochemical Remediation of Dredged Material for Beneficial Use

DEFF Research Database (Denmark)

Pedersen, Anne Juul; Gardner, Kevin H.

2003-01-01

Two different methods, electrodialytic and electroosmotic remediation, were used to demonstrate the potential of electrochemical methods for remediation of contaminated harbor sediments. In two three-week-long laboratory experiments using electrodialysis and electroosmosis, respectively...

Final Report: Laser-Material Interactions Relevant to Analytic Spectroscopy of Wide Band Gap Materials

Energy Technology Data Exchange (ETDEWEB)

Dickinson, J. Thomas [Washington State Univ., Pullman, WA (United States)

2014-04-05

We summarize our studies aimed at developing an understanding of the underlying physics and chemistry in terms of laser materials interactions relevant to laser-based sampling and chemical analysis of wide bandgap materials. This work focused on the determination of mechanisms for the emission of electrons, ions, atoms, and molecules from laser irradiation of surfaces. We determined the important role of defects on these emissions, the thermal, chemical, and physical interactions responsible for matrix effects and mass-dependent transport/detection. This work supported development of new techniques and technology for the determination of trace elements contained such as nuclear waste materials.

Repair and Dredging of Bear Creek Marina Final Environmental Assessment

Science.gov (United States)

2007-06-01

Lagoon and Santa Rosa Sound. Florida Department of Environmental Protection. December 2001. ––––––––, 2002. Technical Report. Florida...Biological Response of Infaunal Macroinvertebrates in the Choctawhatchee Bay System, CARRMA, Florida State University, Tallahassee, FL. Minerals

Reuse of dredged marine soils as landfill liner: Effect of pH on Escherichia coli growth

Science.gov (United States)

Anuar, N. M.; Chan, C. M.

2017-11-01

A potential reuse area yet to be explored is the utilization of dredged marine soils (DMS) as geosorbent to retain pathogenic bacteria in landfill leachate. The use of DMS as geosorbent in landfill site could be considered as a new way of environmental friendly solid waste management. By laying DMS at the base of landfill like conventional clay liners, the geowaste could be simultaneously disposed of and act as passive geosorbent for microbes in leachate. DMS are known to serve as a hospitable environment for bacteria growth. Environmental factors such as soil’s pH, salinity and particle size could affect the bacteria growth rate. This study investigated the effect range of pH value on the growth of indicator bacteria, Escherichia coli (E. coli) isolated from landfill leachate. The results showed that the number of E. coli grew higher in alkaline compared to acidic condition. Findings from this study will serve as a base for future studies for removing bacteria in leachate using DMS as geosorbent in a landfill site.

New laser materials: Final report

International Nuclear Information System (INIS)

1986-10-01

In the Interim Report No. 1, it was reported that the fluorescence lifetime (≥ 750μs) in Nd doped Y(PO 3 ) 3 was longer by a factor of three as compared to YAG. This means potentially three times as much energy storage and consequently more efficient for flashlamp pumping. It also makes diode pumping easier. In addition, since the Y site is octahedrally coordinated, there is a possibility of energy transfer using Cr as the sensitizing element. As suggested by W. Krupke, we decided to explore the trivalent cation metaphosphates systematically. The compounds investigated can be represented by the general formula A(PO 3 ) 3 where A = Y, Lu, In, Sc, GA and Al. The object is to study the fluorescence characteristics of Nd and Cr as well as the effectiveness of energy transfer from Cr to Nd. In addition, we also investigated other possible laser host crystals, notably CaMgSi 2 O 6 (diopside), LaBO 3 and La(BO 2 ) 3 . Results on these materials will also be discussed

Superhard nanophase cutter materials for rock drilling applications; FINAL

International Nuclear Information System (INIS)

Voronov, O.; Tompa, G.; Sadangi, R.; Kear, B.; Wilson, C.; Yan, P.

2000-01-01

The Low Pressure-High Temperature (LPHT) System has been developed for sintering of nanophase cutter and anvil materials. Microstructured and nanostructured cutters were sintered and studied for rock drilling applications. The WC/Co anvils were sintered and used for development of High Pressure-High Temperature (HPHT) Systems. Binderless diamond and superhard nanophase cutter materials were manufactured with help of HPHT Systems. The diamond materials were studied for rock machining and drilling applications. Binderless Polycrystalline Diamonds (BPCD) have high thermal stability and can be used in geothermal drilling of hard rock formations. Nanophase Polycrystalline Diamonds (NPCD) are under study in precision machining of optical lenses. Triphasic Diamond/Carbide/Metal Composites (TDCC) will be commercialized in drilling and machining applications

Constructing wetlands: measuring and modeling feedbacks of oxidation processes between plants and clay-rich material

Science.gov (United States)

Saaltink, Rémon; Dekker, Stefan C.; Griffioen, Jasper; Wassen, Martin J.

2016-04-01

Interest is growing in using soft sediment as a building material in eco-engineering projects. Wetland construction in the Dutch lake Markermeer is an example: here the option of dredging some of the clay-rich lake-bed sediment and using it to construct 10.000 ha of wetland will soon go under construction. Natural processes will be utilized during and after construction to accelerate ecosystem development. Knowing that plants can eco-engineer their environment via positive or negative biogeochemical plant-soil feedbacks, we conducted a six-month greenhouse experiment to identify the key biogeochemical processes in the mud when Phragmites australis is used as an eco-engineering species. We applied inverse biogeochemical modeling to link observed changes in pore water composition to biogeochemical processes. Two months after transplantation we observed reduced plant growth and shriveling as well as yellowing of foliage. The N:P ratios of plant tissue were low and were affected not by hampered uptake of N but by enhanced uptake of P. Plant analyses revealed high Fe concentrations in the leaves and roots. Sulfate concentrations rose drastically in our experiment due to pyrite oxidation; as reduction of sulfate will decouple Fe-P in reducing conditions, we argue that plant-induced iron toxicity hampered plant growth, forming a negative feedback loop, while simultaneously there was a positive feedback loop, as iron toxicity promotes P mobilization as a result of reduced conditions through root death, thereby stimulating plant growth and regeneration. Given these two feedback mechanisms, we propose that when building wetlands from these mud deposits Fe-tolerant species are used rather than species that thrive in N-limited conditions. The results presented in this study demonstrate the importance of studying the biogeochemical properties of the building material and the feedback mechanisms between plant and soil prior to finalizing the design of the eco-engineering project.

Test and evaluation of computerized nuclear material accounting methods. Final report

International Nuclear Information System (INIS)

1995-01-01

In accordance with the definition of a Material Balance Area (MBA) as a well-defined geographical area involving an Integral operation, the building housing the BFS-1 and BFS-1 critical facilities is considered to consist of one MBA. The BFS materials are in the form of small disks clad in stainless steel and each disk with nuclear material has its own serial number. Fissile material disks in the BFS MBA can be located at three key monitoring points: BFS-1 facility, BFS-2 facility and main storage of BFS fissile materials (storage 1). When used in the BFS-1 or BFS-2 critical facilities, the fissile material disks are loaded in tubes (fuel rods) forming critical assembly cores. The following specific features of the BFS MBA should be taken into account for the purpose of computerized accounting of nuclear material: (1) very large number of nuclear material items (about 70,000 fissile material items); and (2) periodically very intensive shuffling of nuclear material items. Requirements for the computerized system are determined by basic objectives of nuclear material accounting: (1) providing accurate information on the identity and location of all items in the BFS material balance area; (2) providing accurate information on location and identity of tamper-indicating devices; (3) tracking nuclear material inventories; (4) issuing periodic reports; (5) assisting with the detection of material gains or losses; (6) providing a history of nuclear material transactions; (7) preventing unauthorized access to the system and data falsification. In August 1995, the prototype computerized accounting system was installed on the BFS facility for trial operation. Information on two nuclear material types was entered into the data base: weapon-grade plutonium metal and 36% enriched uranium dioxide. The total number of the weapon-grade plutonium disks is 12,690 and the total number of the uranium dioxide disks is 1,700

Dewatering of contaminated river sediments

Science.gov (United States)

Church, Ronald H.; Smith, Carl W.; Scheiner, Bernard J.

1994-01-01

Dewatering of slurries has been successfully accomplished by the proper use of polymers in flocculating the fine particulate matter suspended in mineral processing streams. The U.S. Bureau of Mines (USBM) entered into a cooperative research effort with the U.S. Army Corps of Engineers (Corps) for the purpose of testing and demonstrating the applicability of mining flocculation technology to dredging activities associated with the removal of sediments from navigable waterways. The Corps has the responsibility for maintaining the navigable waterways in the United States. Current technology relies primarily on dredging operations which excavate the material from the bottom of waterways. The Corps is testing new dredging technology which may reduce resuspension of sediments by the dredging operation. Pilot plant dredging equipment was tested by the Corps which generated larger quantities of water when compared to conventional equipment, such as the clam shell. The transportation of this 'excess' water adds to the cost of sediment removal. The process developed by the USBM consists of feed material from the barge being pumped through a 4-in line by a centrifugal pump and exiting through a 4-in PVC delivery system. A 1,000-gal fiberglass tank was used to mix the polymer concentrate. The polymer was pumped through a 1-in line using a variable speed progressive cavity pump and introduced to the 4-in feed line prior to passing through a 6-in by 2-ft static mixer. The polymer/feed slurry travels to the clarifying tank where the flocculated material settled to the bottom and allowed 'clean' water to exit the overflow. A pilot scale flocculation unit was operated on-site at the Corps' 'Confined Disposal Facility' in Buffalo, NY.

The influence of environmental factors and dredging on chironomid larval diversity in urban drainage systems in polders strongly influenced by seepage from large rivers

DEFF Research Database (Denmark)

Vermonden, K.; Brodersen, Klaus Peter; Jacobsen, Dean

2011-01-01

, in urban waters strongly influenced by seepage of large rivers. Chironomid assemblages were studied in urban surface-water systems (man-made drainage ditches) in polder areas along lowland reaches of the rivers Rhine-Meuse in The Netherlands. Multivariate analysis was used to identify the key environmental...... factors. Taxon richness, Shannon index (H'), rareness of species, and life-history strategies at urban locations were compared with available data from similar man-made water bodies in rural areas, and the effectiveness of dredging for restoring chironomid diversity in urban waters was tested. Three...... diversity of chironomid communities in urban waters affected by nutrient-rich seepage or inlet of river water...

Zn speciation in a soil contaminated by the deposition of a dredged sediment by synchrotron X-ray techniques

International Nuclear Information System (INIS)

Isaure, Marie-Pierre; Manceau, Alain; Laboudigue, Agnes; Tamura, Nobumichi; Marcus, Matthew A.

2003-09-01

The nature and proportion of Zn species present in an agricultural soil overlaid by a dredged contaminated sediment have been untangled by the novel combination of three non-invasive synchrotron-based x-ray techniques: x-ray microfluorescence (μSXRF), microdiffraction (μXRD), and absorption spectroscopy (EXAFS). One primary (franklinite) and two secondary (phyllomanganate and phyllosilicate) Zn-containing minerals were identified in the initial soil, and another primary (ZnS) and a new secondary (Fe-(oxyhydr)oxide) Zn species in the covered soil. The quantitative analysis of EXAFS spectra recorded on bulk samples indicated that ZnS and Zn-Fe (oxyhydr)oxides amounted to 71+-10 percent and 27+-10 percent, respectively, and the other Zn species to less than 10 percent. The two new Zn species found in the covered soil result from the gravitational migration of ZnS particles initially present in the sediment, and from their further oxidative dissolution and fixation of leached Zn on F e (oxyhydr) oxides

Dissemination of Continuing Education Materials Via Television Delivery Systems. Final Technical Report and Final Report.

Science.gov (United States)

Munushian, Jack

In 1972, the University of Southern California School of Engineering established a 4-channel interactive instructional television network. It was designed to allow employees of participating industries to take regular university science and engineering courses and special continuing education courses at or near their work locations. Final progress…

Build green and conventional materials off-gassing tests: A final report

Energy Technology Data Exchange (ETDEWEB)

Piersol, P.

1995-12-31

Build Green is a certification program that will identify and label building products with a known recycled content. The introduction of these recycled materials has raised the concern that they may emit more indoor pollutants than conventional materials. This study addresses that concern by analyzing Build Green and conventional materials to assess their potential for off-gassing. The study involved emission tests of 37 materials including carpets, carpet undercushions, structural lumber, foundation material, insulation, drywall, fiberboard, counter tops, and cabinetry. The results presented in this report include comparisons of Build Green and conventional materials in terms of emissions of volatile organic compounds and formaldehyde, the material loading ratio, and discussion of the specific sources of the emissions.

Sea floor topography and backscatter intensity of the Historic Area Remediation Site (HARS), offshore of New York, based on multibeam surveys conducted in 1996, 1998, and 2000

Science.gov (United States)

Butman, Bradford; Danforth, W.W.; Knowles, S.C.; May, Brian; Serrett, Laurie

2000-01-01

An area offshore of Sandy Hook, New Jersey, has been used extensively for disposal of dredged and other materials, derived from the New York/New Jersey Harbor and surrounding areas, since the late 1800's (Figure 1). Between 1976 and 1995, the New York Bight Dredged Material Disposal Site, also known as the Mud Dump Site (Figure 2), received on average about 6 million cubic yards of material each year from federal and private maintenance dredging and from harbor deepening activities (Massa and others, 1996). In September 1997 the Mud Dump Site (MDS) was closed as an official ocean disposal site by the U.S. Environmental Protection Agency (http://www.epa.gov/), and the MDS and surrounding areas were designated as the Historic Area Remediation Site (HARS). The HARS is subdivided into a Primary Remediation Area (PRA, subdivided into 9 cells), a Buffer Zone, and a No-Discharge Zone (Figure 2). The sea floor of the HARS, approximately 9 square nautical miles in area, is being remediated by placing at least a one-meter cap of Category I (clean) dredged material on top of the existing surface sediments that exhibit varying degrees of degradation. (See http://www.nan.usace.army.mil/business/prjlinks/dmmp/benefic/hars.htm)(Category I sediments have no potential short or long-term impacts and are acceptable for unrestricted ocean disposal (EPA, 1996)). About 1.1 million cubic yards of dredged material for remediation was placed in the HARS in 1999, and 2.5 million cubic yards in 2000. Three multibeam echosounder surveys were carried out to map the topography and surficial geology of the HARS. The surveys were conducted November 23 - December 3, 1996, October 26 - November 11, 1998, and April 6 - 30, 2000. The surveys were carried out as part of a larger survey of the Hudson Shelf Valley and adjacent shelf (Butman and others, 1998, (http://pubs.usgs.gov/openfile/of98-616/). This report presents maps showing topography, shaded relief, and backscatter intensity (a measure of sea

High Temperature Materials Characterization and Advanced Materials Development

International Nuclear Information System (INIS)

Ryu, Woo Seog; Kim, D. H.; Kim, S. H.

2007-06-01

The project has been carried out for 2 years in stage III in order to achieve the final goals of performance verification of the developed materials, after successful development of the advanced high temperature material technologies for 3 years in Stage II. The mechanical and thermal properties of the advanced materials, which were developed during Stage II, were evaluated at high temperatures, and the modification of the advanced materials were performed. Moreover, a database management system was established using user-friendly knowledge-base scheme to complete the integrated-information material database in KAERI material division

Materials Technology Support for Radioisotope Power Systems Final Report

Energy Technology Data Exchange (ETDEWEB)

Daniel P. Kramer; Chadwick D. Barklay

2008-10-07

Over the period of this sponsored research, UDRI performed a number of materials related tasks that helped to facilitate increased understanding of the properties and applications of a number of candidate program related materials including; effects of neutron irradiation on tantalum alloys using a 500kW reactor, thermodynamic based modeling of the chemical species in weld pools, and the application of candidate coatings for increased oxidation resistance of FWPF (Fine Weave Pierced Fabric) modules.

Materials Technology Support for Radioisotope Power Systems Final Report

International Nuclear Information System (INIS)

Kramer, Daniel P.; Barklay, Chadwick D.

2008-01-01

Over the period of this sponsored research, UDRI performed a number of materials related tasks that helped to facilitate increased understanding of the properties and applications of a number of candidate program related materials including; effects of neutron irradiation on tantalum alloys using a 500kW reactor, thermodynamic based modeling of the chemical species in weld pools, and the application of candidate coatings for increased oxidation resistance of FWPF (Fine Weave Pierced Fabric) modules

Quantum Simulations of Materials and Nanostructures (Q-SIMAN). Final Report

Energy Technology Data Exchange (ETDEWEB)

Galli, Giulia [Univ. of California, Davis, CA (United States); Bai, Zhaojun [Univ. of California, Davis, CA (United States); Ceperley, David [Univ. of Illinois, Urbana, IL (United States); Cai, Wei [Stanford Univ., CA (United States); Gygi, Francois [Univ. of California, Davis, CA (United States); Marzari, Nicola [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Pickett, Warren [Univ. of California, Davis, CA (United States); Spaldin, Nicola [Univ. of California, Santa Barbara, CA (United States); Fattebert, Jean-Luc [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schwegler, Eric [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-09-16

The focus of this SciDAC SAP (Scientific Application) is the development and use of quantum simulations techniques to understand materials and nanostructures at the microscopic level, predict their physical and chemical properties, and eventually design integrated materials with targeted properties. (Here the word ‘materials’ is used in a broad sense and it encompasses different thermodynamic states of matter, including solid, liquids and nanostructures.) Therefore our overarching goal is to enable scientific discoveries in the field of condensed matter and advanced materials through high performance computing.

Materials in the economy; material flows, scarcity, and the environment

Science.gov (United States)

Wagner, Lorie A.

2002-01-01

The importance of materials to the economy of the United States is described, including the levels of consumption and uses of materials. The paths (or flows) that materials take from extraction, through processing, to consumer products, and then final disposition are illustrated. Scarcity and environmental issues as they relate to the flow of materials are discussed. Examples for the three main themes of the report (material flows, scarcity, and the environment) are presented.

Simulation of the Press Hardening Process and Prediction of the Final Mechanical Material Properties

Science.gov (United States)

Hochholdinger, Bernd; Hora, Pavel; Grass, Hannes; Lipp, Arnulf

2011-08-01

Press hardening is a well-established production process in the automotive industry today. The actual trend of this process technology points towards the manufacturing of parts with tailored properties. Since the knowledge of the mechanical properties of a structural part after forming and quenching is essential for the evaluation of for example the crash performance, an accurate as possible virtual assessment of the production process is more than ever necessary. In order to achieve this, the definition of reliable input parameters and boundary conditions for the thermo-mechanically coupled simulation of the process steps is required. One of the most important input parameters, especially regarding the final properties of the quenched material, is the contact heat transfer coefficient (IHTC). The CHTC depends on the effective pressure or the gap distance between part and tool. The CHTC at different contact pressures and gap distances is determined through inverse parameter identification. Furthermore a simulation strategy for the subsequent steps of the press hardening process as well as adequate modeling approaches for part and tools are discussed. For the prediction of the yield curves of the material after press hardening a phenomenological model is presented. This model requires the knowledge of the microstructure within the part. By post processing the nodal temperature history with a CCT diagram the quantitative distribution of the phase fractions martensite, bainite, ferrite and pearlite after press hardening is determined. The model itself is based on a Hockett-Sherby approach with the Hockett-Sherby parameters being defined in function of the phase fractions and a characteristic cooling rate.

Multiyear Program Plan for the High Temperature Materials Laboratory; FINAL

International Nuclear Information System (INIS)

Arvid E. Pasto

2000-01-01

Recently, the U.S. Department of Energy's (DOE) Office of Heavy Vehicle Technologies (OHVT) prepared a Technology Roadmap describing the challenges facing development of higher fuel efficiency, less polluting sport utility vehicles, vans, and commercial trucks. Based on this roadmap, a multiyear program plan (MYPP) was also developed, in which approaches to solving the numerous challenges are enumerated. Additional planning has been performed by DOE and national laboratory staff, on approaches to solving the numerous challenges faced by heavy vehicle system improvements. Workshops and planning documents have been developed concerning advanced aerodynamics, frictional and other parasitic losses, and thermal management. Similarly, the Heavy Vehicle Propulsion Materials Program has developed its own multiyear program plan. The High Temperature Materials Laboratory, a major user facility sponsored by OHVT, has now developed its program plan, described herein. Information was gathered via participation in the development of OHVT's overall Technology Roadmap and MYPP, through personal contacts within the materials-user community, and from attendance at conferences and expositions. Major materials issues for the heavy vehicle industry currently center on trying to increase efficiency of (diesel) engines while at the same time reducing emissions (particularly NO(sub x) and particulates). These requirements dictate the use of increasingly stronger, higher-temperature capable and more corrosion-resistant materials of construction, as well as advanced catalysts, particulate traps, and other pollution-control devices. Exhaust gas recirculation (EGR) is a technique which will certainly be applied to diesel engines in the near future, and its use represents a formidable challenge, as will be described later. Energy-efficient, low cost materials processing methods and surface treatments to improve wear, fracture, and corrosion resistance are also required

Lower Colorado River Proposed General Permit Main Report and Final Environmental Impact Statement.

Science.gov (United States)

1982-04-01

disturbed by construction of dam, channelisation, dredging, and other man -caused and natural disturbances. Riparian woodland and marshland are the...development around the man -made lakes. Historic sites, structures, and properties associated with these events and trends are to be found along the lower...wood source. The Cocopah at Somerton are forced to buy, or at least procure, their mesquite from neighboring Quechans at Fort Yuma. Continued loss of

Flood Control, Roseau River, Roseau and Kittson Counties, Minnesota. Final Environmental Impact Statement.

Science.gov (United States)

1976-12-01

can be inferred from an accident which occurred in August 1970, in which an insecticide dumping resulted in a fish kill that extended for a 3 1/2... nettle (Laportea canadensis), which almost blankets the understory and bloodroot (Sanguinaria canadensis), which was restricted to this community type...Crataegus rotundifolia), stinging nettle (Urtica divica) and thimbleweed. d. Green Ash-Elm Community This type is common on the old dredge disposal sites of

77 FR 63312 - Notice of Intent: Designation of an Ocean Dredged Material Disposal Site (ODMDS) in Eastern Long...

Science.gov (United States)

2012-10-16

... Material Disposal Site (ODMDS) in Eastern Long Island Sound; Connecticut, New York, and Rhode Island AGENCY... (ODMDS) to serve the eastern Long Island Sound region (Connecticut, New York, and Rhode Island). SUMMARY... Environmental Impact Statement that supported the designation of the Central and Western Long Island Sound...

Seafloor studies of Mamala Bay, Honolulu, Hawaii

Science.gov (United States)

Torresan, Michael E.

No comprehensive study of the effects of disposal of dredge spoils has been conducted to determine if the environment has suffered. The U.S. Army Corps of Engineers (USACE) has regularly dredged the shipping channels of Honolulu Harbor and Pearl Harbor for commercial and military purposes. The 5-year frequency for new dredging activity has led to the formation of extensive offshore wide deposits of relatively coarse sediments being created in a sedimentary environment that naturally collects much finer-grained materials. At the same time, the rapid growth of Honolulu and its suburban region over the past 3 decades has added nutrient-enriched sewage outfall to the artificially-heavy sediment load. The combined effects of dredge-spoil disposal and contaminant loads are not well-documented, and are poorly understood. The U.S. Geological Survey (USGS) began a comprehensive study to characterize the seafloor of Mamala Bay.In 1993, the USGS initiated a program sponsored by the USACE and the U.S. Environmental Protection Agency that produced a detailed map of the seafloor, especially of the distribution of dredge spoils, and a preliminary analysis of the environmental effects of dredge-spoils disposal and the chemical effects of the introduction of nutrient-rich outfall. Part of the work would involve sediment sampling, biological testing, and evaluation. Of particular interest is tissue sampling and analysis of endemic shrimp to determine the rates of absorption of toxic elements, such as heavy metals, that are easily brought into the food chain.

Final environmental statement, Liquid Metal Fast Breeder Reactor Program. Volume 1

International Nuclear Information System (INIS)

1975-12-01

Information is presented under the following section headings: LMFBR program options and their compatibility with the major issues affecting commercial development, Proposed Final Environmental Statement for the LMFBR program, December 1974, WASH-1535, supplemental material, and material relating to Proposed Final Environmental Statement review

Biodiesel production from sediments of a eutrophic reservoir

International Nuclear Information System (INIS)

Kuchkina, A.Yu.; Gladyshev, M.I.; Sushchik, N.N.; Kravchuk, E.S.; Kalachova, G.S.

2011-01-01

Sediments from eutrophic reservoir Bugach (Siberia, Russia) were tested for possibility to produce biodiesel. We supposed that the sediments could be a promising biodiesel producer. The major reason of high price of biodiesel fuel is cost of a raw material. The use of dredging sediments for biodiesel production reduces production costs, because the dredging sediments are by-products which originated during lake restoration actions, and are free of cost raw materials. Lipid content in sediments was 0.24% of dry weight. To assess the potential of from sediments as a substitute of diesel fuel, the properties of the biodiesel such as cetane number, iodine number and heat of combustion were calculated. All of this parameters complied with limits established by EN 14214 and EN 14213 related to biodiesel quality. -- Highlights: → Dredging sediments were considered as a new feedstock for biodiesel production. → Lipid and fatty acid content in the sediments were determined. → Main properties of the biodiesel were calculated basing on fatty acid composition. → The properties well complied with limits established in biodiesel standards.

Materials Analysis and Modeling of Underfill Materials.

Energy Technology Data Exchange (ETDEWEB)

Wyatt, Nicholas B [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chambers, Robert S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

The thermal-mechanical properties of three potential underfill candidate materials for PBGA applications are characterized and reported. Two of the materials are a formulations developed at Sandia for underfill applications while the third is a commercial product that utilizes a snap-cure chemistry to drastically reduce cure time. Viscoelastic models were calibrated and fit using the property data collected for one of the Sandia formulated materials. Along with the thermal-mechanical analyses performed, a series of simple bi-material strip tests were conducted to comparatively analyze the relative effects of cure and thermal shrinkage amongst the materials under consideration. Finally, current knowledge gaps as well as questions arising from the present study are identified and a path forward presented.

A full-scale biological aerated filtration system application in the ...

African Journals Online (AJOL)

owner

tanks, gravel filter and finally sand anthracite (3:1 by volume) filter. ... sedimentation of the wastewater for six hours reduced the COD, BOD, and ... suspended solids, pigments color and oil and grease. ... The sludge was been dredged every.

Construction and Demolition Debris 2014 US Final Disposition Estimates Using the CDDPath Method

Data.gov (United States)

U.S. Environmental Protection Agency — Estimates of the final amount and final disposition of materials generated in the Construction and Demolition waste stream measured in total mass of each material....

Potential of kenaf (Hibiscus cannabinus L.) and corn (Zea mays L.) for phytoremediation of dredging sludge contaminated by trace metals.

Science.gov (United States)

Arbaoui, Sarra; Evlard, Aricia; Mhamdi, Mohamed El Wafi; Campanella, Bruno; Paul, Roger; Bettaieb, Taoufik

2013-07-01

The potential of kenaf (Hibiscus cannabinus L.) and corn (Zea mays L.) for accumulation of cadmium and zinc was investigated. Plants have been grown in lysimetres containing dredging sludge, a substratum naturally rich in trace metals. Biomass production was determined. Sludge and water percolating from lysimeters were analyzed by atomic absorption spectrometry. No visible symptoms of toxicity were observed during the three- month culture. Kenaf and corn tolerate trace metals content in sludge. Results showed that Zn and Cd were found in corn and kenaf shoots at different levels, 2.49 mg/kg of Cd and 82.5 mg/kg of Zn in kenaf shoots and 2.1 mg/kg of Cd and 10.19 mg/kg in corn shoots. Quantities of extracted trace metals showed that decontamination of Zn and Cd polluted substrates is possible by corn and kenaf crops. Tolerance and bioaccumulation factors indicated that both species could be used in phytoremediation.

Cross-Scale Baroclinic Simulation of the Effect of Channel Dredging in an Estuarine Setting

Directory of Open Access Journals (Sweden)

Fei Ye

2018-02-01

Full Text Available Holistic simulation approaches are often required to assess human impacts on a river-estuary-coastal system, due to the intrinsically linked processes of contrasting spatial scales. In this paper, a Semi-implicit Cross-scale Hydroscience Integrated System Model (SCHISM is applied in quantifying the impact of a proposed hydraulic engineering project on the estuarine hydrodynamics. The project involves channel dredging and land expansion that traverse several spatial scales on an ocean-estuary-river-tributary axis. SCHISM is suitable for this undertaking due to its flexible horizontal and vertical grid design and, more importantly, its efficient high-order implicit schemes applied in both the momentum and transport calculations. These techniques and their advantages are briefly described along with the model setup. The model features a mixed horizontal grid with quadrangles following the shipping channels and triangles resolving complex geometries elsewhere. The grid resolution ranges from ~6.3 km in the coastal ocean to 15 m in the project area. Even with this kind of extreme scale contrast, the baroclinic model still runs stably and accurately at a time step of 2 min, courtesy of the implicit schemes. We highlight that the implicit transport solver alone reduces the total computational cost by 82%, as compared to its explicit counterpart. The base model is shown to be well calibrated, then it is applied in simulating the proposed project scenario. The project-induced modifications on salinity intrusion, gravitational circulation, and transient events are quantified and analyzed.

Sediment Placement Areas 2012

Data.gov (United States)

California Natural Resource Agency — Dredge material placement sites (DMPS), including active, inactive, proposed and historical placement sites. Dataset covers US Army Corps of Engineers San Francisco...

Sediment Placement Areas 2012

Data.gov (United States)

California Department of Resources — Dredge material placement sites (DMPS), including active, inactive, proposed and historical placement sites. Dataset covers US Army Corps of Engineers San Francisco...

The computation of turbulent recirculating flow using curvilinear finite differences. Application of the k - epsilon model to the flow in dredged trenches

International Nuclear Information System (INIS)

Alfrink, B.J.

1981-08-01

The report treats the computation of turbulent recirculating flow in dredged trenches. The mathematical model consists of the full two-dimensional unsteady Reynolds equations, formulated in primitive variables. Turbulence closure is obtained by means of a two-equation (k - epsilon) model. The numerical technique is based on the use of curvilinear finite differences in space and of fractional steps in time. A procedure is proposed to apply the model for varying roughness circumstances. The value of the Von Karman constant can be determined from geometric information. Afterwards, only the c 1 -constant is adapted by means of a degenerated epsilon-equation. The report describes an extensive sensitivity study for the inlet conditions and the empirical constants. Ultimately, the results of the mathematical model are very satisfactory. Compared with laboratory experiments, the recirculation length is only underpredicted with 10%

Final Report - Assessment of Potential Phosphate Ion-Cementitious Materials Interactions

International Nuclear Information System (INIS)

Naus, Dan J.; Mattus, Catherine H.; Dole, Leslie Robert

2007-01-01

The objectives of this limited study were to: (1) review the potential for degradation of cementitious materials due to exposure to high concentrations of phosphate ions; (2) provide an improved understanding of any significant factors that may lead to a requirement to establish exposure limits for concrete structures exposed to soils or ground waters containing high levels of phosphate ions; (3) recommend, as appropriate, whether a limitation on phosphate ion concentration in soils or ground water is required to avoid degradation of concrete structures; and (4) provide a 'primer' on factors that can affect the durability of concrete materials and structures in nuclear power plants. An assessment of the potential effects of phosphate ions on cementitious materials was made through a review of the literature, contacts with concrete research personnel, and conduct of a 'bench-scale' laboratory investigation. Results of these activities indicate that: no harmful interactions occur between phosphates and cementitious materials unless phosphates are present in the form of phosphoric acid; phosphates have been incorporated into concrete as set retarders, and phosphate cements have been used for infrastructure repair; no standards or guidelines exist pertaining to applications of reinforced concrete structures in high-phosphate environments; interactions of phosphate ions and cementitious materials has not been a concern of the research community; and laboratory results indicate similar performance of specimens cured in phosphate solutions and those cured in a calcium hydroxide solution after exposure periods of up to eighteen months. Relative to the 'primer,' a separate NUREG report has been prepared that provides a review of pertinent factors that can affect the durability of nuclear power plant reinforced concrete structures

Final Report - Assessment of Potential Phosphate Ion-Cementitious Materials Interactions

Energy Technology Data Exchange (ETDEWEB)

Naus, Dan J [ORNL; Mattus, Catherine H [ORNL; Dole, Leslie Robert [ORNL

2007-06-01

The objectives of this limited study were to: (1) review the potential for degradation of cementitious materials due to exposure to high concentrations of phosphate ions; (2) provide an improved understanding of any significant factors that may lead to a requirement to establish exposure limits for concrete structures exposed to soils or ground waters containing high levels of phosphate ions; (3) recommend, as appropriate, whether a limitation on phosphate ion concentration in soils or ground water is required to avoid degradation of concrete structures; and (4) provide a "primer" on factors that can affect the durability of concrete materials and structures in nuclear power plants. An assessment of the potential effects of phosphate ions on cementitious materials was made through a review of the literature, contacts with concrete research personnel, and conduct of a "bench-scale" laboratory investigation. Results of these activities indicate that: no harmful interactions occur between phosphates and cementitious materials unless phosphates are present in the form of phosphoric acid; phosphates have been incorporated into concrete as set retarders, and phosphate cements have been used for infrastructure repair; no standards or guidelines exist pertaining to applications of reinforced concrete structures in high-phosphate environments; interactions of phosphate ions and cementitious materials has not been a concern of the research community; and laboratory results indicate similar performance of specimens cured in phosphate solutions and those cured in a calcium hydroxide solution after exposure periods of up to eighteen months. Relative to the "primer," a separate NUREG report has been prepared that provides a review of pertinent factors that can affect the durability of nuclear power plant reinforced concrete structures.

Characterization of sediment from the dredging of storm water channels in the city of Salvador-BA, Brazil aiming to use in structural ceramics; Caracterizacao de sedimento proveniente de dragagem de canais pluviais do municipio de Salvador-BA visando sua utilizacao em ceramica estrutural

Energy Technology Data Exchange (ETDEWEB)

Santos, O.C.; Breitenbach, S.B.; Coelho, R.E., E-mail: engcruz@ig.com.br, E-mail: silviabb@ifba.edu.br, E-mail: rodrigoecoelho@gmail.com [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), Salvador (Brazil); Andrade, J.C.S.; Sales Junior, J.C.C., E-mail: jean.engmateriais@gmail.com, E-mail: jccalado@gmail.com [Universidade Federal do Amazonas (UFAM), Manaus (Brazil). Dept. de Engenharia de Materiais; Paskocimas, C.A.; Martinelli, A.E.; Nascimento, R.M., E-mail: paskocimas@uol.com.br, E-mail: aemart@uol.com.br, E-mail: rubensmaribondo@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

2017-01-15

The aim of this study was to characterize sediment from the dredging of storm water channels (Scp) in the city of Salvador, Bahia, aiming its maximum replacement by clay in structural ceramics, since this binary mixture is part of the pilot project of the standard mass, in the research of interlocked block ceramic formulation. Initially, the sediment was submitted to the following tests: plasticity index; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; thermal and particle size analyses. The morphology of the material was analyzed by scanning electron microscopy, coupled with energy dispersive spectroscopy. Then, sediment (Scp) was added to clay from the municipality of Candelas, Bahia, in the proportions of 10, 20, 30 and 40 wt%. Specimens were prepared by uniaxial pressing in dimensions of 60 mm x 20 mm, with compacting pressure of 25 MPa, and the material was humidified with 8% of water. Firing was conducted in resistive furnace at temperatures of 850, 950 and 1050 deg C, with 5 deg C / min heating rate. The properties evaluated were: linear shrinkage; water absorption and modulus of rupture. The results indicated the possibility of using SCP in structural ceramics by the prerequisites required in standards, in the manufacture of tiles, sealing blocks and bricks. (author)

Reference materials and measurement traceability

International Nuclear Information System (INIS)

Bingham, C.D.

1980-01-01

Nuclear materials safeguards within the U.S.A. are accomplished by the integration of activities involving physical protection, material control and material accountability. Material accountability requires both sound measurement technology and well-defined accounting procedures to provide final evidence that physical protection and materials control have achieved their purpose. 5 refs

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

International Nuclear Information System (INIS)

Martone, M.

1997-01-01

This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

Energy Technology Data Exchange (ETDEWEB)

Martone, M [ENEA, Centro Ricerche Frascati, Rome (Italy)

1997-01-01

This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

Improving the prediction of the final part geometry in high strength steels U drawing by means of advanced material and friction models

Science.gov (United States)

de Argandoña, Eneko Saenz; Mendiguren, Joseba; Otero, Irune; Mugarra, Endika; Otegi, Nagore; Galdos, Lander

2018-05-01

Steel has been used in vehicles from the automotive industry's inception. Different steel grades are continually being developed in order to satisfy new fuel economy requirements. For example, advanced high strength steel grades (AHSS) are widely used due to their good strength/weight ratio. Because each steel grade has a different microstructure composition and hardness, they show different behaviors when they are subjected to different strain paths. Similarly, the friction behavior when using different contact pressures is considerably altered. In the present paper, four different steel grades, ZSt380, DP600, DP780 and Fortiform 1050 materials are deeply characterized using uniaxial and cyclic tension-compression tests. Coefficient of friction (COF) is also obtained using strip drawing tests. These results have been used to calibrate mixed kinematic-hardening material models as well as pressure dependent friction models. Finally, the geometrical accuracy of the different material and friction models has been evaluated by comparing the numerical predictions with experimental demonstrators obtained using a U-Drawing tester.

Simplified Laboratory Runoff Procedure (SLRP): Procedure and Application

National Research Council Canada - National Science Library

Price, Richard

2000-01-01

The Simplified Laboratory Runoff Procedure (SLRP) was developed to provide a faster, less expensive approach to evaluate surface runoff water quality from dredged material placed in an upland environment...

LDRD final report on nanocomposite materials based on hydrocarbon-bridged siloxanes

Energy Technology Data Exchange (ETDEWEB)

Ulibarri, T.A.; Bates, S.E.; Loy, D.A.; Jamison, G.M.; Emerson, J.A.; Curro, J.G.

1997-05-01

Silicones [polydimethylsiloxane (PDMS) polymers] are environmentally safe, nonflammable, weather resistant, thermally stable, low T{sub g} materials which are attractive for general elastomer applications because of their safety and their performance over a wide temperature range. However, PDMS is inherently weak due to its low glass transition temperature (T{sub g}) and lack of stress crystallization. The major goal of this project was to create a family of reinforced elastomers based on silsesquioxane/PDMS networks. Polydimethylsiloxane-based (PDMS) composite materials containing a variety of alkylene-arylene-bridged polysilsesquioxanes were synthesized in order to probe short chain and linkage effects in bimodal polymer networks. Monte Carlo simulations on the alkylene-bridged silsesquioxane/PDMS system predicted that the introduction of the silsesquioxane short chains into the long chain PDMS network would have a significant reinforcing effect on the elastomer. The silsesquioxane-PDMS networks were synthesized and evaluated. Analysis of the mechanical properties of the resulting materials indicated that use of the appropriate silisesquioxane generated materials with greatly enhanced properties. Arylene and activated alkylene systems resulted in materials that showed superior adhesive strength for metal-to-metal adhesion.

Hydrophilic nanoporous materials

DEFF Research Database (Denmark)

2010-01-01

The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.05, the ......The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.......05, the method comprising the steps of: (a) preparing a precursor material comprising at least one polymeric component and having a first phase and a second phase; (b) removal of at least a part of the first phase of the precursor material prepared in step (a) so as to leave behind a nanoporous material...... of the polymer matrix; (c) irradiating at least a part of said nanoporous material with light of a wave length of in the range of 250-400 nm (or 200-700 nm) in the presence of oxygen and/or ozone. Corresponding hydrophilic nanoporous materials are also disclosed. L...

Final disposal room structural response calculations

International Nuclear Information System (INIS)

Stone, C.M.

1997-08-01

Finite element calculations have been performed to determine the structural response of waste-filled disposal rooms at the WIPP for a period of 10,000 years after emplacement of the waste. The calculations were performed to generate the porosity surface data for the final set of compliance calculations. The most recent reference data for the stratigraphy, waste characterization, gas generation potential, and nonlinear material response have been brought together for this final set of calculations

Quality assurance methods and procedures for accepting radioactive waste for final storage

International Nuclear Information System (INIS)

Wenger, R.

1992-01-01

The concept of quality assurance for the final storage of radioactive materials is presented together with the procedure, characterisation, procedural development and documentation involved. Other topics include the assessment of the material to find its suitability for final storage and the tests for transport. 4 figs., 9 refs

Pilot remediation of sediment from the Petroleum harbour in Amsterdam

International Nuclear Information System (INIS)

Hakstege, A.L.; Geldermalsen, L.A. van

1998-01-01

The Petroleum Harbour project is the third pilot remediation, which was carried out within the framework of POSW (the national development programme for treatment processes of polluted sediments). The main objectives of the pilot remediation are: to demonstrate the biological treatment of dredged materials on a practical scale; and to gain knowledge and experience for the future remediation of the total Petroleum harbour. A strict tender procedure was carefully executed in order to select the most effective and 'state of the art' biodegradation technology. The selected remediation chain was a combination of 'standard' soil treatment technology and newly developed biotechnology. Dredging, biotechnological treatment and the effects of the remediation on the environment were monitored in detail. The quality of the treated sand fraction complied with the Dutch standards for re-use and was actually applied in a project of Rijkswaterstaat. Biodegradation resulted in a substantial decrease of the oil and PAH's contents, but due to the lack of breakdown of a few high-molecular PAH's, the quality requirements of the contract were not achieved. It is concluded that the two main objectives of the project have been attained. Finally some recommendations for the future clean-up of the Petroleum harbour are given. (author)

CNO abundances in Cepheids and supergiants: theoretical implications

International Nuclear Information System (INIS)

Becker, S.A.; Cox, A.N.

1982-01-01

Models of a 9 M/sub sun/ star have been evolved to see if the observed nitrogen enhancement and the carbon and oxygen depletions in yellow supergiants and Cepheids can be explained. In the standard (first dredge-up phase) evolutionary picture, the normal or near normal CNO abundances for the envelopes of stars on the main sequence are altered when such stars become red giants with deeply mixed convective envelopes prior to core He ignition. While this process does result in a noticeable nitrogen enhancement and a carbon reduction (oxygen is only slightly reduced), the observed changes in the CNO abundances are reported to be much larger. Consequently, other additional mechanisms need to be considered. The effects of primordial abundances, mass loss and transfer, convective overshoot, rotation, and magnetic fields are discussed. It is found that in order to explain the observed O depletion, there must be some form of mixing between the convective hydrogen-burning core and the inner part of the radiative envelope. This additional mixed material is then latter dredged up during the red giant phase. A simplified three-zone model is proposed. Finally, as a consequence of this additional mixing, longer main-sequence lifetimes and more luminous blue loops in the Cepheid region are predicted

Development of radiative-cooling materials. Final technical report: FY 1980-1981

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

Work on research and development on glazing and selective emitter materials that will enhance day and night sky radiative cooling is described. The emphasis is on glazing development with a secondary interest in the appropriate selective emitter. The testing focused on the individual material properties. (MHR)

Tailings neutralization and other alternatives for immobilizing toxic materials in tailings. Final report

International Nuclear Information System (INIS)

Opitz, B.E.; Sherwood, D.R.; Dodson, M.E.; Serne, R.J.

1985-09-01

This document, ''Tailing Neutralization and Other Alternatives for Immobilizing Toxic Materials in Tailings,'' is the final report in a series of six. It summarizes research completed since the beginning of the project. Three subtasks are included: Subtask A - Neutralization Methods Selection; Subtask B - Laboratory Analysis; and Subtask C - Field Testing. Subtask A reviews treatment processes from other industries to evaluate whether current waste technology from other fields is applicable to the uranium industry. This task also identifies several reagents that were tested for their effectiveness in treating acidic tailings and tailings solution in order to immobilize the contaminants associated with the acid waste. Subtask B describes the laboratory batch and column treatment studies performed on solid waste tailings and tailings solutions over the course of the project. The evaluation of several reagents identified in Subtask A was based on three criteria: (1) treated effluent water quality; (2) neutralized sludge handling and hydraulic properties; and (3) reagent costs and acid neutralizing efficiency. Subtask C presents a field demonstration plan that will evaluate the effectiveness, costs, and benefits of neutralizing acidic uranium mill tailings solution to reduce the potential leaching of toxic trace metals, radionuclides, and macro ions from a tailings impoundment. Details of the related research can be found in the documents listed in the ''Previous Documents in Series.'' 43 refs., 9 figs., 46 tabs

Final versions of the initial package of classroom materials and guidelines

NARCIS (Netherlands)

Doorman, Michiel; Jonker, Vincent

2014-01-01

The main aim of the mascil Work Package 3 ‘classroom materials’ is to present guidelines and an online collection of teaching materials that encourage and support teachers to design their own classroom materials that connect IBL and the WoW in mathematics and science education.The collection

Fundamentals of Composite Materials for Undergraduate Engineering--A Filmed Presentation. Final Report.

Science.gov (United States)

Busching, Herbert W.

Curricula in undergraduate engineering have not adequately reflected present usage and knowledge of composite materials (types of rock and organic matter in which structurally dissimilar materials are combined). Wide usage of composites is expected to increase the importance of this class of materials and the need for more substantive exposure to…

Humboldt Open Ocean Disposal Site (HOODS) Survey Work 2014

Data.gov (United States)

U.S. Environmental Protection Agency — The Humboldt Open Ocean Disposal Site (HOODS) is a dredged material disposal site located 3 nautical miles (nm) offshore of Humboldt Bay in Northern California....

Handling of final storage of unreprocessed spent nuclear fuel

International Nuclear Information System (INIS)

1978-01-01

In this report the various facilities incorporated in the proposed handling chain for spent fuel from the power stations to the final repository are discribed. Thus the geological conditions which are essential for a final repository is discussed as well as the buffer and canister materials and how they contribute towards a long-term isolation of the spent fuel. Furthermore one chapter deals with leaching of the deposited fuel in the event that the canister is penetrated as well as the transport mechanisms which determine the migration of the radioactive substances through the buffer material. The dispersal processes in the geosphere and the biosphere are also described together with the transfer mechanisms to the ecological systems as well as radiation doses. Finally a summary is given of the safety analysis of the proposed method for the handling and final storage of the spent fuel. (E.R.)

Relationships between fracture toughness and other material properties. Final report

International Nuclear Information System (INIS)

Perra, M.; Finnie, I.

1974-01-01

The key experimental and analytical studies which have led to our present understanding of the mechanisms of ductile fracture are reviewed. It is concluded that insufficient progress has been made in the quantitative description of ductile separation mechanisms on a microscale to allow the realistic prediction of fracture toughness from material properties and microstructure. An experimental study of ductile fracture is underway which has the aim of determining the growth rate of voids in known plastic deformation fields as a function of triaxiality of stress and material work-hardening. Novel specimens of particularly well characterized microstructure are utilized

Inorganic polymers and materials. Final report

Energy Technology Data Exchange (ETDEWEB)

Sneddon, Larry G.

2001-01-01

This DOE-sponsored project was focused on the design, synthesis, characterization, and applications of new types of boron and silicon polymers with a goal of attaining processable precursors to advanced ceramic materials of technological importance. This work demonstrated a viable design strategy for the systematic formation of polymeric precursors to ceramics based on the controlled functionalization of preformed polymers with pendant groups of suitable compositions and crosslinking properties. Both the new dipentylamine-polyborazylene and pinacolborane-hydridopolysilazane polymers, unlike the parent polyborazylene and other polyborosilazanes, are stable as melts and can be easily spun into polymer fibers. Subsequent pyrolyses of these polymer fibers then provide excellent routes to BN and SiNCB ceramic fibers. The ease of synthesis of both polymer systems suggests new hybrid polymers with a range of substituents appended to polyborazylene or polysilazane backbones, as well as other types of preceramic polymers, should now be readily achieved, thereby allowing even greater control over polymer and ceramic properties. This control should now enable the systematic tailoring of the polymers and derived ceramics for use in different technological applications. Other major recent achievements include the development of new types of metal-catalyzed methods needed for the polymerization and modification of inorganic monomers and polymers, and the modification studies of polyvinylsiloxane and related polymers with substituents that enable the formation of single source precursors to high-strength, sintered SiC ceramics.

Canister materials proposed for final disposal of high level nuclear waste

Energy Technology Data Exchange (ETDEWEB)

Mattson, E; Odoj, R; Merz, E [eds.

1981-06-01

The nuclear waste will be enclosed in corrosion resistant canisters. These will be deposited in repositories in geological formations, such as granite, basalt, clay, bedded or domed salt, or the sediments beneath the deep ocean floor. There the canisters will be exposed to groundwater, brine or seawater at an elevated temperature. Species formed by radiolysis may effect the corrosivity of the agent. The corrosion resistance of candidate canister materials is evaluated by corrosion tests and by thermodynamic and mass transport calculations. Examinations of ancient metal objects after long exposure in nature may give additional information. On the basis of the work carried out so far, the principal candidate canister materials are titanium materials, copper, and highpurity alumina.

Materials Informatics: Statistical Modeling in Material Science.

Science.gov (United States)

Yosipof, Abraham; Shimanovich, Klimentiy; Senderowitz, Hanoch

2016-12-01

Material informatics is engaged with the application of informatic principles to materials science in order to assist in the discovery and development of new materials. Central to the field is the application of data mining techniques and in particular machine learning approaches, often referred to as Quantitative Structure Activity Relationship (QSAR) modeling, to derive predictive models for a variety of materials-related "activities". Such models can accelerate the development of new materials with favorable properties and provide insight into the factors governing these properties. Here we provide a comparison between medicinal chemistry/drug design and materials-related QSAR modeling and highlight the importance of developing new, materials-specific descriptors. We survey some of the most recent QSAR models developed in materials science with focus on energetic materials and on solar cells. Finally we present new examples of material-informatic analyses of solar cells libraries produced from metal oxides using combinatorial material synthesis. Different analyses lead to interesting physical insights as well as to the design of new cells with potentially improved photovoltaic parameters. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Materials Degradation and Detection (MD2): Deep Dive Final Report

Energy Technology Data Exchange (ETDEWEB)

McCloy, John S.; Montgomery, Robert O.; Ramuhalli, Pradeep; Meyer, Ryan M.; Hu, Shenyang Y.; Li, Yulan; Henager, Charles H.; Johnson, Bradley R.

2013-02-01

An effort is underway at Pacific Northwest National Laboratory (PNNL) to develop a fundamental and general framework to foster the science and technology needed to support real-time monitoring of early degradation in materials used in the production of nuclear power. The development of such a capability would represent a timely solution to the mounting issues operators face with materials degradation in nuclear power plants. The envisioned framework consists of three primary and interconnected “thrust” areas including 1) microstructural science, 2) behavior assessment, and 3) monitoring and predictive capabilities. A brief state-of-the-art assessment for each of these core technology areas is discussed in the paper.

Section 404 of the Clean Water Act

Science.gov (United States)

Information about the Clean Water Act permitting program for dredge or fill material into waters of the US, including roles, 401 certification of permits, state/tribal assumption of 404 program, mitigation requirements, regulations

Computational materials design

International Nuclear Information System (INIS)

Snyder, R.L.

1999-01-01

Full text: Trial and error experimentation is an extremely expensive route to the development of new materials. The coming age of reduced defense funding will dramatically alter the way in which advanced materials have developed. In the absence of large funding we must concentrate on reducing the time and expense that the R and D of a new material consumes. This may be accomplished through the development of computational materials science. Materials are selected today by comparing the technical requirements to the materials databases. When existing materials cannot meet the requirements we explore new systems to develop a new material using experimental databases like the PDF. After proof of concept, the scaling of the new material to manufacture requires evaluating millions of parameter combinations to optimize the performance of the new device. Historically this process takes 10 to 20 years and requires hundreds of millions of dollars. The development of a focused set of computational tools to predict the final properties of new materials will permit the exploration of new materials systems with only a limited amount of materials characterization. However, to bound computational extrapolations, the experimental formulations and characterization will need to be tightly coupled to the computational tasks. The required experimental data must be obtained by dynamic, in-situ, very rapid characterization. Finally, to evaluate the optimization matrix required to manufacture the new material, very rapid in situ analysis techniques will be essential to intelligently monitor and optimize the formation of a desired microstructure. Techniques and examples for the rapid real-time application of XRPD and optical microscopy will be shown. Recent developments in the cross linking of the world's structural and diffraction databases will be presented as the basis for the future Total Pattern Analysis by XRPD. Copyright (1999) Australian X-ray Analytical Association Inc

Review of the sorption of radionuclides on the bedrock of Haestholmen and on construction and backfill materials of a final repository for reactor wastes

International Nuclear Information System (INIS)

Kulmala, S.; Hakanen, M.

1992-10-01

Imatran Voima Oy (IVO) has plans to build a final repository for reactor wastes in the bedrock of the nuclear power plant site at Haestholmen, Loviisa. This report summarizes the sorption studies of radionuclides in Finnish bedrock performed at the Department of Radiochemistry, University of Helsinki. The values of mass distribution ratios, K d , and surface distribution ratios, K a ; of carbon, calsium, Zirconium, niobium, cobalt, nickel, strontium, cesium, uranium, plutonium, americium, thorium, chlorine, iodine and technetium are surveyed. Special attention is paid to the sorption data for construction and backfill materials of rector waste repository and the bedrock of Haestholmen. Safety assessment of a repository includes calculations of migration of the waste element in construction materials and backfill in the nearfield and in bedrock. Retardation by sorption of waste nuclides compared to groundwater flow is described by using distribution ratios between solid materials and water. (orig.)

Pelican Spit 1988-1997

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Densities of nekton were measured in three created salt marshes to examine habitat development rate. All three marshes were created from dredged material from the...

76 FR 67348 - Olympic Coast National Marine Sanctuary Regulations Revisions

Science.gov (United States)

2011-11-01

... ships; clarify the language referring to consideration of the objectives of the governing bodies of.... The final rule language further clarifies that the governing body of the tribe must certify the tribal... language prohibiting ``drilling into, dredging or otherwise altering the seabed of the sanctuary'' (59 FR...

Nondestructive materials characterization with applications to aerospace materials

CERN Document Server

Nagy, Peter; Rokhlin, Stanislav

2004-01-01

With an emphasis on aircraft materials, this book describes techniques for the material characterization to detect and quantify degradation processes such as corrosion and fatigue. It introduces readers to these techniques based on x-ray, ultrasonic, optical and thermal principles and demonstrates the potential of the techniques for a wide variety of applications concerning aircraft materials, especially aluminum and titanium alloys. The advantages and disadvantages of various techniques are evaluated. An introductory chapter describes the typical degradation mechanisms that must be considered and the microstructure features that have to be detected by NDE methods. Finally, some approaches for making lifetime predictions are discussed. It is suitable as a textbook in special training courses in advanced NDE and aircraft materials characterization.

Chesapeake Bay baseline data acquisition, toxics in the Chesapeake Bay. Final preliminary report, 1946-78

International Nuclear Information System (INIS)

1978-07-01

This report identifies researchers, research activities, and data files applicable to the Chesapeake Bay estuarine system. The identified data were generated after 1973 on the following: submerged aquatic vegetation, shellfish bed closures, eutrophication, toxics accumulation in the food chain, dredging and spoil disposal, hydrologic modifications, modification of fisheries, shoreline erosion, wetlands alterations, and the effects of boating and shipping on water quality. Major past and current program monitoring in the Bay and its tributaries are summarized according to frequency

Hydrogeological effects of dredging navigable canals through lagoon shallows. A case study in Venice

Directory of Open Access Journals (Sweden)

P. Teatini

2017-11-01

Full Text Available For the first time a comprehensive investigation has been carried out to quantify the possible effects of dredging a navigable canal on the hydrogeological system underlying a coastal lagoon. The study is focused on the Venice Lagoon, Italy, where the port authority is planning to open a new 10 m deep and 3 km long canal to connect the city passenger terminal to the central lagoon inlet, thus avoiding the passage of large cruise ships through the historic center of Venice. A modeling study has been developed to evaluate the short (minutes, medium (months, and long (decades term processes of water and pollutant exchange between the shallow aquifer system and the lagoon, possibly enhanced by the canal excavation, and ship wakes. An in-depth characterization of the lagoon subsurface along the channel has supported the numerical modeling. Piezometer and sea level records, geophysical acquisitions, laboratory analyses of groundwater and sediment samples (chemical analyses and ecotoxicity testing, and the outcome of 3-D hydrodynamic and computational fluid dynamic (CFD models have been used to set up and calibrate the subsurface multi-model approach. The numerical outcomes allow us to quantify the groundwater volume and estimate the mass of anthropogenic contaminants (As, Cd, Cu, Cr, Hg, Pb, Se likely leaked from the nearby industrial area over the past decades, and released into the lagoon from the canal bed by the action of depression waves generated by ships. Moreover, the model outcomes help to understand the effect of the hydrogeological layering on the propagation of the tidal fluctuation and salt concentration into the shallow brackish aquifers underlying the lagoon bottom.

76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Science.gov (United States)

2011-10-24

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the availability of the Final EIS/EIR. By this Notice the BLM is also segregating the public lands within the Tule Project application area from appropriation under the public land laws including the Mining Law, but not the Mineral Leasing or Material Sales Act, for a period of 2 years.

Area Strip Mine Reclamation Using Dredged Material: A Field Demonstration.

Science.gov (United States)

1980-07-01

COMMON BEGGAR’S TICK Bidens frondosa COMMON EVENING PRIMROSE Oenothera biennis COMMON ORACH Atriplex patula COMMON REED Phraginites communis...altissima ACERACEAE BOX ELDER Acer negundo RHAMNACEAE COMMON BUCKTHORN Rhamnus cathartica A8 r ONAGRACEAE COMMON EVENING PRIMROSE Oenothera biennis

Final certification of two new reference materials for inorganic trace analysis

International Nuclear Information System (INIS)

Dybczynski, R.; Danko, B.; Kulisa, K.; Chajduk-Maleszewska, E.; Polkowska-Motrenko, H.; Samczynski, Z.; Szopa, Z.

2004-01-01

Two new biological reference materials for inorganic trace analysis: Tea Leaves (INCT-TL-1) and Mixed Polish Herbs (INCT-MPH-2) were prepared and certified at the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, employing the general strategy of the preparation and certification of CRMs developed in INCT. For both materials ca 40 kg of ground, sieved and carefully homogenized fraction of nominal particle size ≤ 67 mm was obtained. Homogeneity of the materials studied by INAA was shown to be good for samples of masses: m ≥ 100 mg but further investigations indicate that for most of elements these materials can be considered homogeneous down to masses of ca 5 mg or perhaps even lower. The certification was based on results of a worldwide interlaboratory comparison, in which 109 laboratories from 19 countries participated. The results of the analysis of a CRM, which was sent and analyzed along with intercomparison samples and the identity of which was known only to the organizers, were utilized in the process of certification. In addition selected elements were analyzed also by definitive methods based on RNAA. The content of more than 30 elements could be certified in each of the new CRMs. Analytical uncertainties and stability uncertainties were quantified to arrive at combined uncertainties of the certified values. In addition information values were provided for some other elements. (author)

Wetland eco-engineering: Measuring and modeling feedbacks of oxidation processes between plants and clay-rich material

NARCIS (Netherlands)

Saaltink, R.; Dekker, S.C.; Griffioen, J.; Wassen, M.J.

2016-01-01

Interest is growing in using soft sediment as a foundation in eco-engineering projects. Wetland construction in the Dutch lake Markermeer is an example: here, dredging some of the clay-rich lake-bed sediment and using it to construct wetland will soon begin. Natural processes will be utilized during

Studies of movement of sediments in Santos bay

International Nuclear Information System (INIS)

Bandeira, J.V.; Aun, P.E.; Bomtempo, V.L.; Salim, L.H.; Minardi, P.S.P.; Santos, J.A.

1990-01-01

In the years of 1973, 74, 80, 81 and 85 several studies were performed at Santos bay, using radioactive tracers, with the following main objectives: to evaluate the behaviour (on the bottom and in suspension) of the mixture of silt and clay which is dredged from the estuary and from its access channel and dumped at pre-determined sites, in the bay and surrounding regions, with the objective of optimizing dredging disposal operations; to quantify the movement of sandy sediments on the bottom, in 3 areas of the bay, in summer and winter conditions, to obtain pertinent information related to the siltation of the access channel. As results of these studies, it was found that: the ancient dumping site, near Itaipu Point, in the western limit of the bay, was inadequate, since the material could return to the bay and to the estuary. The dumping site was moved to a region at the south of Moela Island, located eastwards relative to the bay, which brought substantial economies in dredging works; the bottom sediment transport was quantified, following clouds of tagged materials for about 8 months, thus obtaining important conclusions about transport rates in different regions of the bay. An analysis of the intervening hydrodynamic agents is also presented. (author) (L.J.C.)

Industry to Education Technology Transfer Program. Composite Materials--Personnel Development. Final Report.

Science.gov (United States)

Tomezsko, Edward S. J.

A composite materials education program was established to train Boeing Helicopter Company employees in the special processing of new filament-reinforced polymer composite materials. During the personnel development phase of the joint Boeing-Penn State University project, an engineering instructor from Penn State completed a 5-month, full-time…

Industry to Education Technical Transfer Program & Composite Materials. Composite Materials Course. Fabrication I Course. Fabrication II Course. Composite Materials Testing Course. Final Report.

Science.gov (United States)

Massuda, Rachel

These four reports provide details of projects to design and implement courses to be offered as requirements for the associate degree program in composites and reinforced plastics technology. The reports describe project activities that led to development of curricula for four courses: composite materials, composite materials fabrication I,…

Engineered Materials for Cesium and Strontium Storage Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Sean M. McDeavitt

2010-04-14

Closing the nuclear fuel cycle requires reprocessing spent fuel to recover the long-lived components that still have useful energy content while immobilizing the remnant waste fission products in stable forms. At the genesis of this project, next generation spent fuel reprocessing methods were being developed as part of the U.S. Department of Energy's Advanced Fuel Cycle Initiative. One of these processes was focused on solvent extraction schemes to isolate cesium (Cs) and strontium (Sr) from spent nuclear fuel. Isolating these isotopes for short-term decay storage eases the design requirements for long-term repository disposal; a significant amount of the radiation and decay heat in fission product waste comes from Cs-137 and Sr-90. For the purposes of this project, the Fission Product Extraction (FPEX) process is being considered to be the baseline extraction method. The objective of this project was to evaluate the nature and behavior of candidate materials for cesium and strontium immobilization; this will include assessments with minor additions of yttrium, barium, and rubidium in these materials. More specifically, the proposed research achieved the following objectives (as stated in the original proposal): (1) Synthesize simulated storage ceramics for Cs and Sr using an existing labscale steam reformer at Purdue University. The simulated storage materials will include aluminosilicates, zirconates and other stable ceramics with the potential for high Cs and Sr loading. (2) Characterize the immobilization performance, phase structure, thermal properties and stability of the simulated storage ceramics. The ceramic products will be stable oxide powders and will be characterized to quantify their leach resistance, phase structure, and thermophysical properties. The research progressed in two stages. First, a steam reforming process was used to generate candidate Cs/Sr storage materials for characterization. This portion of the research was carried out at

Engineered Materials for Cesium and Strontium Storage. Final Technical Report

International Nuclear Information System (INIS)

McDeavitt, Sean M.

2010-01-01

Closing the nuclear fuel cycle requires reprocessing spent fuel to recover the long-lived components that still have useful energy content while immobilizing the remnant waste fission products in stable forms. At the genesis of this project, next generation spent fuel reprocessing methods were being developed as part of the U.S. Department of Energy's Advanced Fuel Cycle Initiative. One of these processes was focused on solvent extraction schemes to isolate cesium (Cs) and strontium (Sr) from spent nuclear fuel. Isolating these isotopes for short-term decay storage eases the design requirements for long-term repository disposal; a significant amount of the radiation and decay heat in fission product waste comes from Cs-137 and Sr-90. For the purposes of this project, the Fission Product Extraction (FPEX) process is being considered to be the baseline extraction method. The objective of this project was to evaluate the nature and behavior of candidate materials for cesium and strontium immobilization; this will include assessments with minor additions of yttrium, barium, and rubidium in these materials. More specifically, the proposed research achieved the following objectives (as stated in the original proposal): (1) Synthesize simulated storage ceramics for Cs and Sr using an existing labscale steam reformer at Purdue University. The simulated storage materials will include aluminosilicates, zirconates and other stable ceramics with the potential for high Cs and Sr loading. (2) Characterize the immobilization performance, phase structure, thermal properties and stability of the simulated storage ceramics. The ceramic products will be stable oxide powders and will be characterized to quantify their leach resistance, phase structure, and thermophysical properties. The research progressed in two stages. First, a steam reforming process was used to generate candidate Cs/Sr storage materials for characterization. This portion of the research was carried out at Purdue

Plasma-material interactions

International Nuclear Information System (INIS)

Wilson, K.L.

1984-01-01

Plasma-interactive components must be resistant to erosion processes, efficient in heat removal, and effective in minimizing tritium inventory and permeation. As long as plasma edge temperatures are 50 eV, no one material can satisfy the diverse requirements imposed by these plasma materials interactions. The only solution is the design of duplex, or even more complicated, structures. The material that faces the plasma should be low atomic number, with acceptable erosion and evaporation characteristics. The substrate material must have high thermal conductivity for heat removal. Finally, materials must be selected judiciously for tritium compatibility. In conclusion, materials play a critical role in the achievement of safe and economical magnetic fusion energy. Improvements in materials have already led to many advances in present day device operation, but additional innovative materials solutions are required for the critical plasma materials interaction issues in future power reactors

Materialism.

Science.gov (United States)

Melnyk, Andrew

2012-05-01

Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

Geotechnical engineering for ocean waste disposal. An introduction

Science.gov (United States)

Lee, Homa J.; Demars, Kenneth R.; Chaney, Ronald C.; ,

1990-01-01

As members of multidisciplinary teams, geotechnical engineers apply quantitative knowledge about the behavior of earth materials toward designing systems for disposing of wastes in the oceans and monitoring waste disposal sites. In dredge material disposal, geotechnical engineers assist in selecting disposal equipment, predict stable characteristics of dredge mounds, design mound caps, and predict erodibility of the material. In canister disposal, geotechnical engineers assist in specifying canister configurations, predict penetration depths into the seafloor, and predict and monitor canister performance following emplacement. With sewage outfalls, geotechnical engineers design foundation and anchor elements, estimate scour potential around the outfalls, and determine the stability of deposits made up of discharged material. With landfills, geotechnical engineers evaluate the stability and erodibility of margins and estimate settlement and cracking of the landfill mass. Geotechnical engineers also consider the influence that pollutants have on the engineering behavior of marine sediment and the extent to which changes in behavior affect the performance of structures founded on the sediment. In each of these roles, careful application of geotechnical engineering principles can contribute toward more efficient and environmentally safe waste disposal operations.

Tier I ecological evaluation for phase III channel improvements to the John. F. Baldwin ship channel

Energy Technology Data Exchange (ETDEWEB)

Bienert, R.W.; Shreffler, D.K.; Word, J.Q.; Kohn, N.P. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

1994-05-01

To assist the US Army Corps of Engineers (USACE) in determing whether the material from proposed dredging of the John F. Baldwin Ship Channel (JFBSC) is suitable for unrestricted, unconfined open-ocean disposal, Battelle/Marine Sciences Laboratory (MSL) prepared this report. Based on these findings, sediments that would be removed during Phase III improvements to the JFBSC fail to meet the three suitability criteria for open-ocean disposal. Firstly, fine-grained sediments comprise a significant fraction of the bottom material in some areas of the channel, and this material is not exposed to high current or wave energy. Dredged material from the JFBSC is not being proposed for beach nourishment; therefore the second criterion is not met. JFBSC sediments do not meet the third criterion because, although they may be substantially similar to substrates at several of the proposed disposal sites, they are from an area that historically has experienced loading of contaminants, which toxicology studies have shown have the potential to result in acute toxicity or significant bioaccumulation.

The materials selection in ITER and the first materials workshop

International Nuclear Information System (INIS)

Matera, R.; Barabash, V.; Kalinin, G.; Tanaka, S.

1998-01-01

The selection of materials and joining technologies to be used in ITER is a trade-off between multiple and often conflicting requirements derived from the unique features of the fusion environment. Materials selection must encompass a total engineering approach, by considering not only physical and mechanical properties, but also the components' manufacturing, their maintainability and reliability, and, finally, how they can be recycled or disposed of at the end of machine operation

Dredging Research, Volume 3, No. 3. DNA Technology to Impact Dredged Material Projects through Faster, More Accurate Testing Methods

National Research Council Canada - National Science Library

McDonald, Allison

2000-01-01

.... Most people associate DNA with criminal cases and paternity testing, but thanks to research projects such as the Human Genome Project, which has isolated and identified thousands of genes, many...

Dredging Operations Technical Support Program. Aquaculture in Dredged Material Containment Areas, Proceedings Held at Galveston, Texas on September 1982.

Science.gov (United States)

1983-10-01

the world’s growing need for animal protein . c. Aquaculture can provide additional stability and diversification for U. S. agriculture and agribusiness...are as follows: 33 _’k .2- .2. .. -7 First there is the Texas Historical Society. Friends, we have had dinosaurs , bears, alligators, and Indians...farm-raised catfish should find a place in the diets of more and more people. The product is high in protein , low in cholesterol, and available year

Irradiation-Accelerated Corrosion of Reactor Core Materials. Final Report

Energy Technology Data Exchange (ETDEWEB)

Jiao, Zhujie [Univ. of Michigan, Ann Arbor, MI (United States); Was, Gary [Univ. of Michigan, Ann Arbor, MI (United States); Bartels, David [Univ. of Notre Dame, IN (United States)

2015-04-02

This project aims to understand how radiation accelerates corrosion of reactor core materials. The combination of high temperature, chemically aggressive coolants, a high radiation flux and mechanical stress poses a major challenge for the life extension of current light water reactors, as well as the success of most all GenIV concepts. Of these four drivers, the combination of radiation and corrosion places the most severe demands on materials, for which an understanding of the fundamental science is simply absent. Only a few experiments have been conducted to understand how corrosion occurs under irradiation, yet the limited data indicates that the effect is large; irradiation causes order of magnitude increases in corrosion rates. Without a firm understanding of the mechanisms by which radiation and corrosion interact in film formation, growth, breakdown and repair, the extension of the current LWR fleet beyond 60 years and the success of advanced nuclear energy systems are questionable. The proposed work will address the process of irradiation-accelerated corrosion that is important to all current and advanced reactor designs, but remains very poorly understood. An improved understanding of the role of irradiation in the corrosion process will provide the community with the tools to develop predictive models for in-reactor corrosion, and to address specific, important forms of corrosion such as irradiation assisted stress corrosion cracking.

Microbial occurrence in bentonite-based buffer materials of a final disposal site for low level radioactive waste in Taiwan

International Nuclear Information System (INIS)

Chou Fongin; Chen Tzungyuang; Li Chiachin; Wen Hsiaowei

2011-01-01

This research addresses the potential of microbial implications in bentonite for use as a buffer and backfill material in final disposal site for low-level radioactive waste (LLRW) in Taiwan, where has a special island-type climate. Microbe activities naturally present in this site were analyzed, and buffer materials (BM) consisted of 100%, 70% or 50% bentonite were prepared for laboratory studies. A total of 39 microbial strains were isolated, and the predominant strains included four bacterial, one yeast and four fungal strains. Growth inhibition was not detected in any tested strain cultured in a radiation field with a dose rate of 0.2 Gy/h. Most of the isolated strains grew under a dose rate of 1.4 Gy/h. The D 10 values of the tested strains ranged from 0.16 to 2.05 kGy. The mycelia of tested fungal strains could spread over 5 cm during six months of inoculation in BM. The spreading activity of the tested bacteria was less than that of the fungi. Moreover, biofilms were observed on the surfaces of the BM. Since a large and diverse population of microbes is present in Taiwan, microbes may contribute to the mobilization of radionuclides in the disposal site. (author)

In-plane Material Filters for the Discrete Material Optimization Method

DEFF Research Database (Denmark)

Sørensen, Rene; Lund, Erik

2015-01-01

, because the projection filter is a non-linear function of the design variables, the projected variables have to be re-scaled in a final so-called normalization filter. This is done to prevent the optimizer in creating superior, but non-physical pseudo-materials. The method is demonstrated on a series......This paper presents in-plane material filters for the Discrete Material Optimization method used for optimizing laminated composite structures. The filters make it possible for engineers to specify a minimum length scale which governs the minimum size of areas with constant material continuity....... Consequently, engineers can target the available production methods, and thereby increase its manufacturability while the optimizer is free to determine which material to apply together with an optimum location, shape, and size of these areas with constant material continuity. By doing so, engineers no longer...

Final Exam Weighting as Part of Course Design

Directory of Open Access Journals (Sweden)

Matthew Franke

2018-03-01

Full Text Available The weighting of a final exam or a final assignment is an essential part of course design that is rarely discussed in pedagogical literature. Depending on the weighting, a final exam or assignment may provide unequal benefits to students depending on their prior performance in the class. Consequently, uncritical grade weighting can discount student learning, by ensuring that improved mastery of material at the semester’s end is not reflected in the course grade. Problems related to several common final exam weights are explored, as are potential solutions to unequal student outcomes made possible by uncritical grade weighting. Ultimately, this essay argues that choosing a weight for a final exam or a final assignment determines what types of student success ought to be possible in the class; therefore, instructors should assign exam weights intentionally, being fully aware of the potential benefits and problems of the weights that they choose.

Source book of educational materials for radiation therapy. Final report

International Nuclear Information System (INIS)

Pijar, M.L.

1979-08-01

The Source Book is a listing of educational materials in radiation therapy technology. The first 17 sections correspond to the subjects identified in the ASRT Curriculum Guide for schools of radiation therapy. Each section is divided into publications and in some sections audiovisuals and training aids. Entries are listed without endorsement

Final Report: Nanoscale Dynamical Heterogeneity in Complex Magnetic Materials

Energy Technology Data Exchange (ETDEWEB)

Kevan, Stephen [Univ. of Oregon, Eugene, OR (United States)

2016-05-27

A magnetic object can be demagnetized by dropping it on a hard surface, but what does ‘demagnetized’ actually mean? In 1919 Heinrich Barkhausen proved the existence of magnetic domains, which are regions of uniform magnetization that are much larger than atoms but much smaller than a macroscopic object. A material is fully magnetized when domain magnetizations are aligned, while it is demagnetized when the domain magnetizations are randomly oriented and the net magnetization is zero. The heterogeneity of a demagnetized object leads to interesting questions. Magnets are unstable when their poles align, and stable when their poles anti-align, so why is the magnetized state ever stable? What do domains look like? What is the structure of a domain wall? How does the magnetized state transform to the demagnetized state? How do domains appear and disappear? What are the statistical properties of domains and how do these vary as the domain pattern evolves? Some of these questions remain the focus of intense study nearly a century after Barkhausen’s discovery. For example, just a few years ago a new kind of magnetic texture called a skyrmion was discovered. A skyrmion is a magnetic domain that is a nanometer-scale, topologically protected vortex. ‘Topologically protected’ means that skyrmions are hard to destroy and so are stable for extended periods. Skyrmions are characterized by integral quantum numbers and are observed to move with little dissipation and so could store and process information with very low power input. Our research project uses soft x-rays, which offer very high magnetic contrast, to probe magnetic heterogeneity and to measure how it evolves in time under external influences. We will condition a soft x-ray beam so that the wave fronts will be coherent, that is, they will be smooth and well-defined. When coherent soft x-ray beam interacts with a magnetic material, the magnetic heterogeneity is imprinted onto the wave fronts and projected into

Brazos Santiago Inlet, Texas, Shoaling Study