WorldWideScience

Sample records for dragon geometrical models

  1. Standalone visualization tool for three-dimensional DRAGON geometrical models

    Energy Technology Data Exchange (ETDEWEB)

    Lukomski, A.; McIntee, B.; Moule, D.; Nichita, E. [Faculty of Energy Systems and Nuclear Science, Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)

    2008-07-01

    DRAGON is a neutron transport and depletion code able to solve one-, two- and three-dimensional problems. To date DRAGON provides two visualization modules, able to represent respectively two- and three-dimensional geometries. The two-dimensional visualization module generates a postscript file, while the three dimensional visualization module generates a MATLAB M-file with instructions for drawing the tracks in the DRAGON TRACKING data structure, which implicitly provide a representation of the geometry. The current work introduces a new, standalone, tool based on the open-source Visualization Toolkit (VTK) software package which allows the visualization of three-dimensional geometrical models by reading the DRAGON GEOMETRY data structure and generating an axonometric image which can be manipulated interactively by the user. (author)

  2. Model testing of Wave Dragon

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Previous to this project a scale model 1:50 of the wave energy converter (WEC) Wave Dragon was built by the Danish Maritime Institute and tested in a wave tank at Aalborg University (AAU). The test programs investigated the movements of the floating structure, mooring forces and forces in the reflectors. The first test was followed by test establishing the efficiency in different sea states. The scale model has also been extensively tested in the EU Joule Craft project JOR-CT98-7027 (Low-Pressure Turbine and Control Equipment for Wave Energy Converters /Wave Dragon) at University College Cork, Hydraulics and Maritime Research Centre, Ireland. The results of the previous model tests have formed the basis for a redesign of the WEC. In this project a reconstruction of the scale 1:50 model and sequential tests of changes to the model geometry and mass distribution parameters will be performed. AAU will make the modifications to the model based on the revised Loewenmark design and perform the tests in their wave tank. Grid connection requirements have been established. A hydro turbine with no movable parts besides the rotor has been developed and a scale model 1:3.5 tested, with a high efficiency over the whole head range. The turbine itself has possibilities for being used in river systems with low head and variable flow, an area of interest for many countries around the world. Finally, a regulation strategy for the turbines has been developed, which is essential for the future deployment of Wave Dragon.The video includes the following: 1. Title, 2. Introduction of the Wave Dragon, 3. Model test series H, Hs = 3 m, Rc = 3 m, 4. Model test series H, Hs = 5 m, Rc = 4 m, 5. Model test series I, Hs = 7 m, Rc = 1.25 m, 6. Model test series I, Hs = 7 m, Rc = 4 m, 7. Rolling title. On this VCD additional versions of the video can be found in the directory 'addvideo' for playing the video on PC's. These versions are: Model testing of Wave Dragon, DVD version

  3. Hydraulic Model Tests on Modified Wave Dragon

    DEFF Research Database (Denmark)

    Hald, Tue; Lynggaard, Jakob

    A floating model of the Wave Dragon (WD) was built in autumn 1998 by the Danish Maritime Institute in scale 1:50, see Sørensen and Friis-Madsen (1999) for reference. This model was subjected to a series of model tests and subsequent modifications at Aalborg University and in the following...... are found in Hald and Lynggaard (2001). Model tests and reconstruction are carried out during the phase 3 project: ”Wave Dragon. Reconstruction of an existing model in scale 1:50 and sequentiel tests of changes to the model geometry and mass distribution parameters” sponsored by the Danish Energy Agency...

  4. Pragmatic geometric model evaluation

    Science.gov (United States)

    Pamer, Robert

    2015-04-01

    Quantification of subsurface model reliability is mathematically and technically demanding as there are many different sources of uncertainty and some of the factors can be assessed merely in a subjective way. For many practical applications in industry or risk assessment (e. g. geothermal drilling) a quantitative estimation of possible geometric variations in depth unit is preferred over relative numbers because of cost calculations for different scenarios. The talk gives an overview of several factors that affect the geometry of structural subsurface models that are based upon typical geological survey organization (GSO) data like geological maps, borehole data and conceptually driven construction of subsurface elements (e. g. fault network). Within the context of the trans-European project "GeoMol" uncertainty analysis has to be very pragmatic also because of different data rights, data policies and modelling software between the project partners. In a case study a two-step evaluation methodology for geometric subsurface model uncertainty is being developed. In a first step several models of the same volume of interest have been calculated by omitting successively more and more input data types (seismic constraints, fault network, outcrop data). The positions of the various horizon surfaces are then compared. The procedure is equivalent to comparing data of various levels of detail and therefore structural complexity. This gives a measure of the structural significance of each data set in space and as a consequence areas of geometric complexity are identified. These areas are usually very data sensitive hence geometric variability in between individual data points in these areas is higher than in areas of low structural complexity. Instead of calculating a multitude of different models by varying some input data or parameters as it is done by Monte-Carlo-simulations, the aim of the second step of the evaluation procedure (which is part of the ongoing work) is to

  5. Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Pecher, Arthur; Kofoed, Jens Peter

    2010-01-01

    The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions of the perf......The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions...... of the performance of the device at different scaling ratios and locations of interest is strongly required. The overtopping, depending on the local conditions of the deployment site, is identified as the right stage to be considered in the modelling. The existing formulation of the overtopping model needs...... to be updated in order to represent more accurately the effects of the geometrical features and stability of the device and of the local conditions and nonscalable parameters on the overtopping flow. The paper analyses the conditions at which the present formulation has been established and proposes a strategy...

  6. Experimental modelling of the overtopping flow on the Wave Dragon Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Parmeggiani, S.; Kofoed, J.P.

    2010-11-15

    The Wave Dragon is a floating slack-moored Wave Energy Converter (WEC) of the overtopping type. Oncoming waves are focused by two wing reflectors towards the ramp of the device, surge-up and overtop into a reservoir placed at a higher level than the surface of the sea. The energy production takes place as the water is led back to the sea through a set of low-head hydro-turbines. After many years of development, Wave Dragon (WD) is now facing the phase of pre-commercial demonstration. In this phase it is very important to be able to use the available data to predict the performances of the device at different scales and locations. A flexible and comprehensive modelling tool is therefore highly required. Wave Dragon produces power through different steps of energy conversion: 1. Primary energy conversion: overtopping - The energy content of the wave (partly in the kinetic and partly in the potential form) is transferred to the device in the form of volumes of water coming into the reservoir. These volumes are stored at a higher level than the surrounding sea, being a stock of potential energy. 2. Secondary energy conversion: turbines - The potential energy stored in the reservoir is transformed into mechanical energy as the water flows back to the sea, activating the lowhead hydro-turbines. 3. Tertiary energy conversion step: generators - The turbines shaft rotation activates the permanent magnet generators, converting mechanical energy into electrical energy. 4. Grid connection and delivery of the power - The electricity produced is delivered to the grid at the right frequency, by means of a frequency converter. The present research is focused on the overtopping. Being the primary energy conversion mechanism of the WD, the overtopping is indeed the stage where the performances of the device are influenced by local conditions and the geometric features of the set-up. This makes it the right step where to account for these features through an accurate modelling

  7. Hydraulic model tests on modified Wave Dragon. Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Hald, T.; Lynggaard, J.

    2002-11-01

    The purpose of this report is to describe the model tests conducted with a new designed 2. generation WD model as well as obtained model test results. Tests are conducted as sequential reconstruction followed by physical model tests. All details concerning the reconstruction are found in Hald and Lynggaard (2001). Model tests and reconstruction are carried out during the phase 3 project: 'Wave Dragon. Reconstruction of an existing model in scale 1:50 and sequential tests of changes to the model geometry and mass distribution parameters' sponsored by the Danish Energy Agency (DEA) wave energy programme. The tests will establish a well documented basis for the development of a 1:4.5 scale prototype planned for testing Nissum Bredning, a sea inlet on the Danish West Coast. (au)

  8. Experimental Modeling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, Erik

    2011-01-01

    The Wave Dragon Wave Energy Converter is currently facing a precommercial phase. At this stage of development a reliable overtopping model is highly required, in order to predict the performance of the device at possible deployment locations. A model formulation derived for an overtopping device...... with general geometry has been used so far. The paper presents an updated formulation drawn through the tank testing of a scaled model the Wave Dragon. The sensitivity analysis of the main features influencing the overtopping flow led to an updated model formulation which can be specifically suited...... for the Wave Dragon....

  9. Experimental Modeling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, Erik

    2011-01-01

    The Wave Dragon Wave Energy Converter is currently facing a precommercial phase. At this stage of development a reliable overtopping model is highly required, in order to predict the performance of the device at possible deployment locations. A model formulation derived for an overtopping device...... with general geometry has been used so far. The paper presents an updated formulation drawn through the tank testing of a scaled model the Wave Dragon. The sensitivity analysis of the main features influencing the overtopping flow led to an updated model formulation which can be specifically suited...... for the Wave Dragon....

  10. The Wave Dragon: tests on a modified model

    Energy Technology Data Exchange (ETDEWEB)

    Martinelli, Luca; Frigaard, Peter

    1999-09-01

    A modified floating model of the Wave Dragon was tested for movements, overtopping and forces on critical positions. The modifications and consequent testing of the model are part of a R and D programme. 18 tests (repetitions included) were carried out during May 1999. Forces in 7 different positions and movements for three degrees of freedom (heave, pitch and surge) were recorded for 7 wave situations. Total overtopping was measured for 5 different wave situations. Furthermore influence of crest freeboard was tested. Sensitivity to the energy spreading in multidirectional seas was investigated. A typical exponential equation describing overtopping was fitted to the data in case of frequent wave conditions. The formula is compared to the present tests. (au)

  11. Experimental Update of the Overtopping Model Used for the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter; Friis-Madsen, Erik

    2013-01-01

    An overtopping model specifically suited for Wave Dragon is needed in order to improve the reliability of its performance estimates. The model shall be comprehensive of all relevant physical processes that affect overtopping and flexible to adapt to any local conditions and device configuration....... An experimental investigation is carried out to update an existing formulation suited for 2D draft-limited, low-crested structures, in order to include the effects on the overtopping flow of the wave steepness, the 3D geometry of Wave Dragon, the wing reflectors, the device motions and the non-rigid connection...... of which can be measured in real-time. Instead of using new fitting coefficients, this approach allows a broader applicability of the model beyond the Wave Dragon case, to any overtopping WEC or structure within the range of tested conditions. Predictions reliability of overtopping over Wave Dragon...

  12. Hubbard model with geometrical frustration

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hunpyo

    2009-10-15

    At first we present the details of the dual fermion (DF), the cluster extension of dynamical mean field theory (CDMFT) and continuous-time quantum Monte Carlo (CT QMC) methods. Using a panoply of these methods we explore the Hubbard model on the triangular and hyperkagome lattice. We find a first-order transition and continuous transition on the triangular and hyper-kagome lattice, respectively. Moreover, we find the reentrant behavior due to competition between the magnetic correlation and itinerancy of electrons by source of geometrical frustration on both lattices. (orig.)

  13. Wave Dragon

    DEFF Research Database (Denmark)

    Kramer, Morten; Frigaard, Peter

    På foranledning af Löwenmark F.R.I, er der udført numeriske beregninger af Wave Dragons (herefter WD) armes effektivitet for forskellige geometriske udformninger. 5 geometriske modeller, hvor WD's arme er forkortet/forlænget er undersøgt for 3 forskellige drejninger af armene. I alt er 15...

  14. Wave Dragon

    DEFF Research Database (Denmark)

    Kramer, Morten; Frigaard, Peter

    På foranledning af Löwenmark F.R.I, er der udført numeriske beregninger af Wave Dragons (herefter WD) armes effektivitet for forskellige geometriske udformninger. 5 geometriske modeller, hvor WD's arme er forkortet/forlænget er undersøgt for 3 forskellige drejninger af armene. I alt er 15...

  15. Phenomenological modeling of Geometric Metasurfaces

    CERN Document Server

    Ye, Weimin; Xiang, Yuanjiang; Fan, Dianyuan; Zhang, Shuang

    2015-01-01

    Metasurfaces, with their superior capability in manipulating the optical wavefront at the subwavelength scale and low manufacturing complexity, have shown great potential for planar photonics and novel optical devices. However, vector field simulation of metasurfaces is so far limited to periodic-structured metasurfaces containing a small number of meta-atoms in the unit cell by using full-wave numerical methods. Here, we propose a general phenomenological method to analytically model metasurfaces made up of arbitrarily distributed meta-atoms based on the assumption that the meta-atoms possess localized resonances with Lorentz-Drude forms, whose exact form can be retrieved from the full wave simulation of a single element. Applied to phase modulated geometric metasurfaces, our analytical results show good agreement with full-wave numerical simulations. The proposed theory provides an efficient method to model and design optical devices based on metasurfaces.

  16. Elastic scattering in geometrical model

    Science.gov (United States)

    Plebaniak, Zbigniew; Wibig, Tadeusz

    2016-10-01

    The experimental data on proton-proton elastic and inelastic scattering emerging from the measurements at the Large Hadron Collider, calls for an efficient model to fit the data. We have examined the optical, geometrical picture and we have found the simplest, linear dependence of this model parameters on the logarithm of the interaction energy with the significant change of the respective slopes at one point corresponding to the energy of about 300 GeV. The logarithmic dependence observed at high energies allows one to extrapolate the proton-proton elastic, total (and inelastic) cross sections to ultra high energies seen in cosmic rays events which makes a solid justification of the extrapolation to very high energy domain of cosmic rays and could help us to interpret the data from an astrophysical and a high energy physics point of view.

  17. Dragon's blood dropping pills have protective effects on focal cerebral ischemia rats model.

    Science.gov (United States)

    Xin, Nian; Yang, Fang-Ju; Li, Yan; Li, Yu-Juan; Dai, Rong-Ji; Meng, Wei-Wei; Chen, Yan; Deng, Yu-Lin

    2013-12-15

    Dragon's blood is a bright red resin obtained from Dracaena cochinchinensis (Lour.) S.C.Chen (Yunnan, China). As a traditional Chinese medicinal herb, it has great traditional medicinal value and is used for wound healing and to stop bleeding. Its main biological activity comes from phenolic compounds. In this study, phenolic compounds were made into dropping pills and their protective effects were examined by establishing focal cerebral ischemia rats model used method of Middle Cerebral Artery Occlusion (MCAO), and by investigating indexes of neurological scores, infarct volume, cerebral index, cerebral water content and oxidation stress. Compared to model group, high, middle and low groups of Dragon's blood dropping pills could improve the neurological function significantly (pDragon's blood dropping pills had protective effects on focal cerebral ischemia rats.

  18. Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Pecher, Arthur; Kofoed, Jens Peter

    2010-01-01

    The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions of the perf......The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions...

  19. Geometrical approach to fluid models

    NARCIS (Netherlands)

    Kuvshinov, B. N.; Schep, T. J.

    1997-01-01

    Differential geometry based upon the Cartan calculus of differential forms is applied to investigate invariant properties of equations that describe the motion of continuous media. The main feature of this approach is that physical quantities are treated as geometrical objects. The geometrical

  20. Geometrical approach to fluid models

    NARCIS (Netherlands)

    Kuvshinov, B. N.; Schep, T. J.

    1997-01-01

    Differential geometry based upon the Cartan calculus of differential forms is applied to investigate invariant properties of equations that describe the motion of continuous media. The main feature of this approach is that physical quantities are treated as geometrical objects. The geometrical notio

  1. Experimental Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter

    The Wave Dragon is a floating slack-moored Wave Energy Converter (WEC) of the overtopping type. Oncoming waves are focused by two wing reflectors towards the ramp of the device, surge-up and overtop into a reservoir placed at a higher level than the surface of the sea. The energy production takes...... place as the water is led back to the sea through a set of low-head hydro-turbines. After many years of development, Wave Dragon (WD) is now facing the phase of pre-commercial demonstration. In this phase it is very important to be able to use the available data to predict the performances of the device...... at different scales and locations. A flexible and comprehensive modelling tool is therefore highly required. Wave Dragon produces power through different steps of energy conversion: 1. Primary energy conversion: overtopping – The energy content of the wave (partly in the kinetic and partly in the potential...

  2. Higher-Dimensional Geometric $\\sigma$-Models

    CERN Document Server

    Vasilic, M

    1999-01-01

    Geometric $\\sigma$-models have been defined as purely geometric theories of scalar fields coupled to gravity. By construction, these theories possess arbitrarily chosen vacuum solutions. Using this fact, one can build a Kaluza--Klein geometric $\\sigma$-model by specifying the vacuum metric of the form $M^4\\times B^d$. The obtained higher dimensional theory has vanishing cosmological constant but fails to give massless gauge fields after the dimensional reduction. In this paper, a modified geometric $\\sigma$-model is suggested, which solves the above problem.

  3. Experimental Update of the Overtopping Model Used for the Wave Dragon Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Parmeggiani, Stefano [Wave Dragon Ltd., London (United Kingdom); Kofoed, Jens Peter [Aalborg Univ. (Denmark). Department of Civil Engineering; Friis-Madsen, Erik [Wave Dragon Ltd., London (United Kingdom)

    2013-04-15

    An overtopping model specifically suited for Wave Dragon is needed in order to improve the reliability of its performance estimates. The model shall be comprehensive of all relevant physical processes that affect overtopping and flexible to adapt to any local conditions and device configuration. An experimental investigation is carried out to update an existing formulation suited for 2D draft-limited, low-crested structures, in order to include the effects on the overtopping flow of the wave steepness, the 3D geometry of Wave Dragon, the wing reflectors, the device motions and the non-rigid connection between platform and reflectors. The study is carried out in four phases, each of them specifically targeted at quantifying one of these effects through a sensitivity analysis and at modeling it through custom-made parameters. These are depending on features of the wave or the device configuration, all of which can be measured in real-time. Instead of using new fitting coefficients, this approach allows a broader applicability of the model beyond the Wave Dragon case, to any overtopping WEC or structure within the range of tested conditions. Predictions reliability of overtopping over Wave Dragon increased, as the updated model allows improved accuracy and precision respect to the former version.

  4. Experimental Update of the Overtopping Model Used for the Wave Dragon Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Erik Friis-Madsen

    2013-04-01

    Full Text Available An overtopping model specifically suited for Wave Dragon is needed in order to improve the reliability of its performance estimates. The model shall be comprehensive of all relevant physical processes that affect overtopping and flexible to adapt to any local conditions and device configuration. An experimental investigation is carried out to update an existing formulation suited for 2D draft-limited, low-crested structures, in order to include the effects on the overtopping flow of the wave steepness, the 3D geometry of Wave Dragon, the wing reflectors, the device motions and the non-rigid connection between platform and reflectors. The study is carried out in four phases, each of them specifically targeted at quantifying one of these effects through a sensitivity analysis and at modeling it through custom-made parameters. These are depending on features of the wave or the device configuration, all of which can be measured in real-time. Instead of using new fitting coefficients, this approach allows a broader applicability of the model beyond the Wave Dragon case, to any overtopping WEC or structure within the range of tested conditions. Predictions reliability of overtopping over Wave Dragon increased, as the updated model allows improved accuracy and precision respect to the former version.

  5. Some technical issues in geometric modeling

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D.P.

    1983-01-01

    The full impact of CAD/CAM will not be felt until geometric modeling systems support dimensioning and tolerancing, have sophisticated user interfaces, and are capable of routinely handling many representation conversions. The attainment of these capabilities requires a joint effort among users, implementors, and theoreticians of geometric modeling.

  6. 5th Dagstuhl Seminar on Geometric Modelling

    CERN Document Server

    Brunnett, Guido; Farin, Gerald; Goldman, Ron

    2004-01-01

    In 19 articles presented by leading experts in the field of geometric modelling the state-of-the-art on representing, modeling, and analyzing curves, surfaces as well as other 3-dimensional geometry is given. The range of applications include CAD/CAM-systems, computer graphics, scientific visualization, virtual reality, simulation and medical imaging. The content of this book is based on selected lectures given at a workshop held at IBFI Schloss Dagstuhl, Germany. Topics treated are: – curve and surface modelling – non-manifold modelling in CAD – multiresolution analysis of complex geometric models – surface reconstruction – variational design – computational geometry of curves and surfaces – 3D meshing – geometric modelling for scientific visualization – geometric models for biomedical applications

  7. Rule-based transformations for geometric modelling

    Directory of Open Access Journals (Sweden)

    Thomas Bellet

    2011-02-01

    Full Text Available The context of this paper is the use of formal methods for topology-based geometric modelling. Topology-based geometric modelling deals with objects of various dimensions and shapes. Usually, objects are defined by a graph-based topological data structure and by an embedding that associates each topological element (vertex, edge, face, etc. with relevant data as their geometric shape (position, curve, surface, etc. or application dedicated data (e.g. molecule concentration level in a biological context. We propose to define topology-based geometric objects as labelled graphs. The arc labelling defines the topological structure of the object whose topological consistency is then ensured by labelling constraints. Nodes have as many labels as there are different data kinds in the embedding. Labelling constraints ensure then that the embedding is consistent with the topological structure. Thus, topology-based geometric objects constitute a particular subclass of a category of labelled graphs in which nodes have multiple labels.

  8. Rule-based transformations for geometric modelling

    CERN Document Server

    Bellet, Thomas; Gall, Pascale Le; 10.4204/EPTCS.48.5

    2011-01-01

    The context of this paper is the use of formal methods for topology-based geometric modelling. Topology-based geometric modelling deals with objects of various dimensions and shapes. Usually, objects are defined by a graph-based topological data structure and by an embedding that associates each topological element (vertex, edge, face, etc.) with relevant data as their geometric shape (position, curve, surface, etc.) or application dedicated data (e.g. molecule concentration level in a biological context). We propose to define topology-based geometric objects as labelled graphs. The arc labelling defines the topological structure of the object whose topological consistency is then ensured by labelling constraints. Nodes have as many labels as there are different data kinds in the embedding. Labelling constraints ensure then that the embedding is consistent with the topological structure. Thus, topology-based geometric objects constitute a particular subclass of a category of labelled graphs in which nodes hav...

  9. Geometric sigma model of the Universe

    Science.gov (United States)

    Vasilić, Milovan

    2017-05-01

    The purpose of this work is to demonstrate how an arbitrarily chosen background of the Universe can be made a solution of a simple geometric sigma model. Geometric sigma models are purely geometric theories in which spacetime coordinates are seen as scalar fields coupled to gravity. Although they look like ordinary sigma models, they have the peculiarity that their complete matter content can be gauged away. The remaining geometric theory possesses a background solution that is predefined in the process of constructing the theory. The fact that background configuration is specified in advance is another peculiarity of geometric sigma models. In this paper, I construct geometric sigma models based on different background geometries of the Universe. Whatever background geometry is chosen, the dynamics of its small perturbations is shown to have a generic classical stability. This way, any freely chosen background metric is made a stable solution of a simple model. Three particular models of the Universe are considered as examples of how this is done in practice. Supported by Serbian Ministry of Education, Science and Technological Development (171031)

  10. Hierarchical Geometric Constraint Model for Parametric Feature Based Modeling

    Institute of Scientific and Technical Information of China (English)

    高曙明; 彭群生

    1997-01-01

    A new geometric constraint model is described,which is hierarchical and suitable for parametric feature based modeling.In this model,different levels of geometric information are repesented to support various stages of a design process.An efficient approach to parametric feature based modeling is also presented,adopting the high level geometric constraint model.The low level geometric model such as B-reps can be derived automatically from the hig level geometric constraint model,enabling designers to perform their task of detailed design.

  11. Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter; Knapp, W.

    2006-01-01

    Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...... this extended period. The prototype is highly instrumented. The overtopping characteristic and the power produced are presented here. This has enabled comparison between the prototype and earlier results from both laboratory model and computer simulation. This gives the optimal operating point and the expected...

  12. Geometric Modelling by Recursively Cutting Vertices

    Institute of Scientific and Technical Information of China (English)

    吕伟; 梁友栋; 等

    1989-01-01

    In this paper,a new method for curve and surface modelling is introduced which generates curves and surfaces by recursively cutting and grinding polygons and polyhedra.It is a generalization of the existing corner-cutting methods.A lot of properties,such as geometric continuity,representation,shape-preserving,and the algorithm are studied which show that such curves and surfaces are suitable for geometric designs in CAD,computer graphics and their application fields.

  13. Connexions for the nuclear geometrical collective model

    Science.gov (United States)

    Rosensteel, G.; Sparks, N.

    2015-11-01

    The Bohr-Mottelson-Frankfurt model of nuclear rotations and quadrupole vibrations is a foundational model in nuclear structure physics. The model, also called the geometrical collective model or simply GCM(3), has two hidden mathematical structures, one group theoretic and the other differential geometric. Although the group structure has been understood for some time, the geometric structure is a new feature that this paper investigates in some detail. Using the de Rham Laplacian \\triangle =\\star d \\star d for the kinetic energy extends significantly the physical scope of the GCM(3) model. This Laplacian contains a ‘magnetic’ term due to the connexion between base manifold rotational and fibre vortex degrees of freedom. When the connexion specializes to irrotational flow, the Laplacian reduces to the Bohr-Mottelson kinetic energy operator.

  14. Geometric Modeling Application Interface Program

    Science.gov (United States)

    1990-11-01

    Manual IDEF-Extended ( IDEFIX ) Integrated Information Support System (IISS), ICAM Project 6201, Contract F33615-80-C-5155, December 1985. Interim...Differential Geometry of Curves and Surfaces, M. P. de Carmo, Prentice-Hall, Inc., 1976. IDEFIX Readers Reference, D. Appleton Company, December 1985...Modeling. IDEFI -- IDEF Information Modeling. IDEFIX -- IDEF Extended Information Modeling. IDEF2 -- IDEF Dynamics Modeling. IDSS -- Integrated Decision

  15. Analysis of Geometrical Specification Model Based on the New GeometricalProduct Specification Language

    Institute of Scientific and Technical Information of China (English)

    马利民; 王金星; 蒋向前; 李柱; 徐振高

    2004-01-01

    Geometrical Product Specification and verification (GPS) is an ISO standard system coveting standards of size, dimension,geometrical tolerance and surface texture of geometrical product. ISO/TC213 on the GPS has been working towards coordination of the previous standards in tolerance and related metrology in order to publish the next generation of the GPS language. This paper introduces the geometrical product specification model for design, manufacturing and verification based on the improved GPS and its new concepts,i.e., surface models, geometrical features and operations. An application example for the geometrical product specification model is then given.

  16. Geometrical Models and Hadronic Radii

    CERN Document Server

    Zahra, Sarwat; Fazal-e-Aleem,; Hussain, Talib; Zafar, Abrar Ahmad; Tahir, Sohail Afzal

    2015-01-01

    By using electromagnetic form factors predicted by Generalized Chou Yang model (GCYM), we compute rms radii of several hadrons with varying strangeness content such as (Pion, Proton, Phi, Lambda0, Sigma+, Sigma- and Omega-). The computed radii are found quite consistent with the results of other models and experiments, indicating excellent predicting power of GCYM. The results indicate that rms radii decrease with increase in strangeness content, separately for mesons and baryons.

  17. Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Sørensen, H. C.

    1998-01-01

    This paper concerns with the development of the wave energy converter (WEC) Wave Dragon. This WEC is based on the overtopping principle. An overview of the performed research done concerning the Wave Dragon over the past years is given, and the results of one of the more comprehensive studies......, concerning a hydraulic evaluation and optimisation of the geometry of the Wave Dragon, is presented. Furthermore, the plans for the future development projects are sketched....

  18. The Wave Dragon: 3D overtopping tests on a floating model

    Energy Technology Data Exchange (ETDEWEB)

    Martinelli, Luca; Frigaard, Peter

    1999-05-01

    In order to investigate the overtopping likely to occur in the Wave Dragon (WD), some tests were carried out measuring the total overtopping volumes on a floating 1:50 model for 5 selected wave conditions. The model set-up and the tests are first described. The aim of the tests is to measure all the water overtopping the crest freeboard and, if possible, to obtain some elements to enhance the WD efficiency. A typical exponential equation describing overtopping has been fitted to the data. Tests results are then given and compared to previous tests performed in a 2D non-floating model of the structure. (au)

  19. Model-based vision using geometric hashing

    Science.gov (United States)

    Akerman, Alexander, III; Patton, Ronald

    1991-04-01

    The Geometric Hashing technique developed by the NYU Courant Institute has been applied to various automatic target recognition applications. In particular, I-MATH has extended the hashing algorithm to perform automatic target recognition ofsynthetic aperture radar (SAR) imagery. For this application, the hashing is performed upon the geometric locations of dominant scatterers. In addition to being a robust model-based matching algorithm -- invariant under translation, scale, and 3D rotations of the target -- hashing is of particular utility because it can still perform effective matching when the target is partially obscured. Moreover, hashing is very amenable to a SIMD parallel processing architecture, and thus potentially realtime implementable.

  20. A geometrical approach to structural change modeling

    OpenAIRE

    Stijepic, Denis

    2013-01-01

    We propose a model for studying the dynamics of economic structures. The model is based on qualitative information regarding structural dynamics, in particular, (a) the information on the geometrical properties of trajectories (and their domains) which are studied in structural change theory and (b) the empirical information from stylized facts of structural change. We show that structural change is path-dependent in this model and use this fact to restrict the number of future structural cha...

  1. Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter; Friis-Madsen, Erik

    2008-01-01

    Since March 2003 a prototype of Wave Dragon has been tested in an inland sea in Denmark. This has been a great success with all subsystems tested and improved through working in an offshore environment. The project has proved the Wave Dragon device and has enabled the next stage, a production sized...

  2. Healthy Dragon

    Institute of Scientific and Technical Information of China (English)

    孙继山

    2005-01-01

    The Chinese economic dragon is healthy and dynamic. The dragorthead,Shanghai, is developing at a pace never before seen in world history, The dragon's body is also doing well, not least because there is tremendous competition across the country. Thus, four cities along the central Yangtze River Region are trying to strengthen their competitiveness.

  3. Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter; Friis-Madsen, Erik;

    2008-01-01

    Since March 2003 a prototype of Wave Dragon has been tested in an inland sea in Denmark. This has been a great success with all subsystems tested and improved through working in an offshore environment. The project has proved the Wave Dragon device and has enabled the next stage, a production sized...

  4. Advanced Geometric Modeler with Hybrid Representation

    Institute of Scientific and Technical Information of China (English)

    杨长贵; 陈玉健; 等

    1996-01-01

    An advanced geometric modeler GEMS4.0 has been developed,in which feature representation is used at the highest level abstraction of a product model.Boundary representation is used at the bottom level,while CSG model is adopted at the median level.A BRep data structure capable of modeling non-manifold is adopted.UNRBS representation is used for all curved surfaces,Quadric surfaces have dual representations consisting of their geometric data such as radius,center point,and center axis.Boundary representation of free form surfaces is easily built by sweeping and skinning method with NURBS geometry.Set operations on curved solids with boundary representation are performed by an evaluation process consisting of four steps.A file exchange facility is provided for the conversion between product data described by STEP and product information generated by GEMS4.0.

  5. Geometric Models of the Relativistic Harmonic Oscillator

    CERN Document Server

    Cotaescu, I I

    1997-01-01

    A family of relativistic geometric models is defined as a generalization of the actual anti-de Sitter (1+1) model of the relativistic harmonic oscillator. It is shown that all these models lead to the usual harmonic oscillator in the non-relativistic limit, even though their relativistic behavior is quite different. Among quantum models we find a set of models with countable energy spectra, and another one having only a finite number of energy levels and in addition a continuous spectrum.

  6. Geometric Algebra Model of Distributed Representations

    CERN Document Server

    Patyk, Agnieszka

    2010-01-01

    Formalism based on GA is an alternative to distributed representation models developed so far --- Smolensky's tensor product, Holographic Reduced Representations (HRR) and Binary Spatter Code (BSC). Convolutions are replaced by geometric products, interpretable in terms of geometry which seems to be the most natural language for visualization of higher concepts. This paper recalls the main ideas behind the GA model and investigates recognition test results using both inner product and a clipped version of matrix representation. The influence of accidental blade equality on recognition is also studied. Finally, the efficiency of the GA model is compared to that of previously developed models.

  7. Geometrical geodesy techniques in Goddard earth models

    Science.gov (United States)

    Lerch, F. J.

    1974-01-01

    The method for combining geometrical data with satellite dynamical and gravimetry data for the solution of geopotential and station location parameters is discussed. Geometrical tracking data (simultaneous events) from the global network of BC-4 stations are currently being processed in a solution that will greatly enhance of geodetic world system of stations. Previously the stations in Goddard earth models have been derived only from dynamical tracking data. A linear regression model is formulated from combining the data, based upon the statistical technique of weighted least squares. Reduced normal equations, independent of satellite and instrumental parameters, are derived for the solution of the geodetic parameters. Exterior standards for the evaluation of the solution and for the scale of the earth's figure are discussed.

  8. Geometrical model of multidimensional orbital motion

    Energy Technology Data Exchange (ETDEWEB)

    Jacak, D [Institute of Mathematics and Computer Science, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw (Poland)], E-mail: dorota.jacak@pwr.wroc.pl

    2008-05-15

    We consider a geometrical n-dimensional model of orbital-type rotation, for n{>=}4. The vectors generating this process are defined and the Fibonacci sequence is found in representation of their lengths. Within the dimension analysis of Planck units, we consider an example of the multidimensional whirl and define a sequence of formal fields. Special attention is paid to the three subsequent elements of this sequence, called here magnetic, electric and energy fields, which allow for some physical interpretations.

  9. Validation of a thermal threshold nociceptive model in bearded dragons (Pogona vitticeps).

    Science.gov (United States)

    Couture, Émilie L; Monteiro, Beatriz P; Aymen, Jessica; Troncy, Eric; Steagall, Paulo V

    2017-05-01

    To validate a thermal threshold (TT) nociceptive model in bearded dragons (Pogona vitticeps) and to document TT changes after administration of morphine. A two-part randomized, blinded, controlled, experimental study. Five adult bearded dragons (242-396 g). A TT device delivered a ramped nociceptive stimulus (0.6 °C second(-1)) to the medial thigh until a response (leg kick/escape behavior) was observed or maximum (cut-off) temperature of 62 °C was reached. In phase I, period 1, six TT readings were determined at 20 minute intervals for evaluation of repeatability. Two of these readings were randomly assigned to be sham to assess specificity of the behavioral response. The same experiment was repeated 2 weeks later (period 2) to test reproducibility. In phase II, animals were administered either intramuscular morphine (10 mg kg(-1)) or saline 0.9%. TTs (maximum 68 °C) were determined before and 2, 4, 8, 12 and 24 hours after treatment administration. Data were analyzed using one-way anova (temporal changes and repeatability) and paired t tests (reproducibility and treatment comparisons) using Bonferroni correction (p < 0.05). Mean TT values were 57.4 ± 3.8 °C and 57.3 ± 4.3 °C for periods 1 and 2, respectively. Data were repeatable within each period (p = 0.83 and p = 0.07, respectively). Reproducibility between periods was remarkable (p = 0.86). False-positive responses during sham testing were 10%. TTs were significantly increased after morphine administration at 2, 4 and 8 hours compared with baseline, and at 2 and 4 hours compared with saline 0.9%. The highest TT was 67.7 ± 0.7 °C at 4 hours after morphine administration. Testing was repeatable, reproducible and well tolerated in bearded dragons. TT nociceptive testing detected morphine administration and may be suitable for studying opioid regimens in bearded dragons. Copyright © 2017 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and

  10. Model Testing of Forces in the Reflector Joint and Mooring Forces on Wave Dragon

    DEFF Research Database (Denmark)

    Gilling, Lasse; Kofoed, Jens Peter; Tedd, James

    This report aims to present the results of a test series analysing the forces in the redesigned reflector joint and the forces in the main mooring link. The resluts presented are intended to be used by WD project partners, for the design and construction of the joint on the prototype Wave Dragon...... at Nissum Bredning and for future North Sea scale Wave Dragon. Lengths, forces and other dimentions presented are scaled to the North sea Wave Dragon unless otherwise specified....

  11. Model Testing of Forces in the Reflector Joint and Mooring Forces on Wave Dragon

    DEFF Research Database (Denmark)

    Gilling, Lasse; Kofoed, Jens Peter; Tedd, James

    This report aims to present the results of a test series analysing the forces in the redesigned reflector joint and the forces in the main mooring link. The resluts presented are intended to be used by WD project partners, for the design and construction of the joint on the prototype Wave Dragon...... at Nissum Bredning and for future North Sea scale Wave Dragon. Lengths, forces and other dimentions presented are scaled to the North sea Wave Dragon unless otherwise specified....

  12. Some Asymptotic Inference in Multinomial Nonlinear Models (a Geometric Approach)

    Institute of Scientific and Technical Information of China (English)

    WEIBOCHENG

    1996-01-01

    A geometric framework is proposed for multinomlat nonlinear modelsbased on a modified vemlon of the geometric structure presented by Bates & Watts[4]. We use this geometric framework to study some asymptotic inference in terms ofcurvtures for multlnomial nonlinear models. Our previous results [15] for ordlnary nonlinear regression models are extended to multlnomlal nonlinear models.

  13. The Wave Dragon

    DEFF Research Database (Denmark)

    Sørensen, H. C.; Hansen, R.; Friis-Madsen, E.

    2000-01-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type, utilizing a patented wave reflector design to focus the waves towards a ramp, and the overtopping is used for electricity production through a set of Kaplan/propeller hydro turbines. During the last 2 years, excessive...... design an testing has been performed on a scale 1:50 model of the Wave Dragon, and on a scale 1:3:5 model turbine. Thus survivability, overtopping, hydraulic response, turbine performance and feasibility have been verified....

  14. Knowledge-based geometric modeling in construction

    DEFF Research Database (Denmark)

    Bonev, Martin; Hvam, Lars

    2012-01-01

    a considerably high amount of their recourses is required for designing and specifying the majority of their product assortment. As design decisions are hereby based on knowledge and experience about behaviour and applicability of construction techniques and materials for a predefined design situation, smart...... tools need to be developed, to support these activities. In order to achieve a higher degree of design automation, this study proposes a framework for using configuration systems within the CAD environment together with suitable geometric modeling techniques on the example of a Danish manufacturer...

  15. Wave Dragon MW

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter

    Wave Dragon is a wave energy converter of the overtopping type. The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the experience gained a full scale, multi MW prototype...

  16. Wave Dragon MW

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter

    Wave Dragon is a wave energy converter of the overtopping type. The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the experience gained a full scale, multi MW prototype...

  17. Young Children's Understanding of Geometric Shapes: The Role of Geometric Models

    Science.gov (United States)

    Elia, Iliada; Gagatsis, Athanasios; Kyriakides, Leonidas

    2003-01-01

    In this paper, we explore the role of polygonal shapes as geometrical models in teaching mathematics, so as to elicit and interpret children's geometric conceptions and understanding about shapes. Primary pupils were asked to draw a stairway of figures (triangles, squares and rectangles) each one bigger than the preceding one. Pupils use two…

  18. Geometric Model of a Coronal Cavity

    Science.gov (United States)

    Kucera, Therese A.; Gibson, S. E.; Ratawicki, D.; Dove, J.; deToma, G.; Hao, J.; Hudson, H. S.; Marque, C.; McIntosh, P. S.; Reeves, K. K.; hide

    2010-01-01

    We observed a coronal cavity from August 8-18 2007 during a multi-instrument observing campaign organized under the auspices of the International Heliophysical Year (IHY). Here we present initial efforts to model the cavity with a geometrical streamer-cavity model. The model is based the white-light streamer mode] of Gibson et a]. (2003 ), which has been enhanced by the addition of a cavity and the capability to model EUV and X-ray emission. The cavity is modeled with an elliptical cross-section and Gaussian fall-off in length and width inside the streamer. Density and temperature can be varied in the streamer and cavity and constrained via comparison with data. Although this model is purely morphological, it allows for three-dimensional, multi-temperature analysis and characterization of the data, which can then provide constraints for future physical modeling. Initial comparisons to STEREO/EUVI images of the cavity and streamer show that the model can provide a good fit to the data. This work is part of the effort of the International Space Science Institute International Team on Prominence Cavities

  19. Geometric Model of a Coronal Cavity

    Science.gov (United States)

    Kucera, Therese A.; Gibson, S. E.; Ratawicki, D.; Dove, J.; deToma, G.; Hao, J.; Hudson, H. S.; Marque, C.; McIntosh, P. S.; Reeves, K. K.; Schmidt, D. J.; Sterling, A. C.; Tripathi, D. K.; Williams, D. R.; Zhang, M.

    2010-01-01

    We observed a coronal cavity from August 8-18 2007 during a multi-instrument observing campaign organized under the auspices of the International Heliophysical Year (IHY). Here we present initial efforts to model the cavity with a geometrical streamer-cavity model. The model is based the white-light streamer mode] of Gibson et a]. (2003 ), which has been enhanced by the addition of a cavity and the capability to model EUV and X-ray emission. The cavity is modeled with an elliptical cross-section and Gaussian fall-off in length and width inside the streamer. Density and temperature can be varied in the streamer and cavity and constrained via comparison with data. Although this model is purely morphological, it allows for three-dimensional, multi-temperature analysis and characterization of the data, which can then provide constraints for future physical modeling. Initial comparisons to STEREO/EUVI images of the cavity and streamer show that the model can provide a good fit to the data. This work is part of the effort of the International Space Science Institute International Team on Prominence Cavities

  20. Modelling and Testing of Wave Dragon Wave Energy Converter Towards Full Scale Deployment

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano

    -commercial stage in which it has proven difficult to secure the necessary funding for the deployment of a full-scale demonstrator unit. The work presented aims at easing this process, by increasing public and scientific knowledge of the device, as well as by showing the latest progress in its development. Research....... This is mainly due to the development of an updated overtopping model specifically suited to Wave Dragon, which allows greater quality to predictions of the primary energy absorption of the device compared to previous versions. At the same time an equitable approach has been described and used in the performance......, the research has also provided a deeper insight into the physics of the overtopping process by individually assessing the influence of related device configuration and wave features, which goes beyond the present application and may be used for other overtopping WECs as well. Comprehensive analysis...

  1. Geometric Modeling of Inclusions as Ellipsoids

    Science.gov (United States)

    Bonacuse, Peter J.

    2008-01-01

    Nonmetallic inclusions in gas turbine disk alloys can have a significant detrimental impact on fatigue life. Because large inclusions that lead to anomalously low lives occur infrequently, probabilistic approaches can be utilized to avoid the excessively conservative assumption of lifing to a large inclusion in a high stress location. A prerequisite to modeling the impact of inclusions on the fatigue life distribution is a characterization of the inclusion occurrence rate and size distribution. To help facilitate this process, a geometric simulation of the inclusions was devised. To make the simulation problem tractable, the irregularly sized and shaped inclusions were modeled as arbitrarily oriented, three independent dimensioned, ellipsoids. Random orientation of the ellipsoid is accomplished through a series of three orthogonal rotations of axes. In this report, a set of mathematical models for the following parameters are described: the intercepted area of a randomly sectioned ellipsoid, the dimensions and orientation of the intercepted ellipse, the area of a randomly oriented sectioned ellipse, the depth and width of a randomly oriented sectioned ellipse, and the projected area of a randomly oriented ellipsoid. These parameters are necessary to determine an inclusion s potential to develop a propagating fatigue crack. Without these mathematical models, computationally expensive search algorithms would be required to compute these parameters.

  2. Mechanical Modeling of Near-Fault Deformation Within the Dragon's Back Pressure Ridge, San Andreas Fault, Carrizo Plain, California

    Science.gov (United States)

    Hilley, G. E.; Arrowsmith, R.

    2011-12-01

    This contribution uses field observations and numerical modeling to understand how slip along the variably oriented fault surfaces in the upper few km of the San Andreas Fault (SAF) zone produces near-fault deformation observed within a 4.5-km-long Dragon's Back Pressure Ridge (DBPR) in the Carrizo Plain, central California. Geologic and geomorphic mapping of this feature indicates that the amplitude of monoclinal warping of Quaternary sediments increases from southeast to northwest along the southwestern third of the DBPR, and remains approximately constant throughout the remaining two thirds of the landform. When viewed with other structural observations and limited near-surface magnetotelluric imaging, these geologic observations are most compatible with a scenario in which shallow offset of the SAF to the northeast creates a structural knuckle that is anchored to the North American plate. Thus, deformation accrues as right-lateral strike-slip motion along the SAF moves this obstruction along the fault plane through the DBPR block. We have used the Gale numerical model to simulate deformation expected for geometries similar to those inferred within the vicinity of the DBPR. This is accomplished by relating stresses and strains in the upper crust according to a Drucker-Prager (plastic yielding) constitutive rule. Deformation in the model is driven by applying 35 mm/yr of right-lateral strike-slip motion to the model boundary; this displacement rate is likewise applied to the base of the model. The model geometry of the SAF at the beginning of the loading was fashioned to produce the discontinuity in the geometry of the fault plane that is inferred from field observations. The friction and cohesion of crust on each side of the fault were changed between models to determine the parameter values that preserve the structural discontinuity along the SAF as finite deformation accrued. The structural discontinuity over the ~4.5 km of model displacement is maintained in

  3. Geometric model of robotic arc welding for automatic programming

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Geometric information is important for automatic programming of arc welding robot. Complete geometric models of robotic arc welding are established in this paper. In the geometric model of weld seam, an equation with seam length as its parameter is introduced to represent any weld seam. The method to determine discrete programming points on a weld seam is presented. In the geometric model of weld workpiece, three class primitives and CSG tree are used to describe weld workpiece. Detailed data structure is presented. In pose transformation of torch, world frame, torch frame and active frame are defined, and transformation between frames is presented. Based on these geometric models, an automatic programming software package for robotic arc welding, RAWCAD, is developed. Experiments show that the geometric models are practical and reliable.

  4. Model Testing of Hydraulic Damping of the Reflector Joint on Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    Further development of the Wave Dragon wave energy converter in preparation for full-scale demonstration in the North Sea, PHASE A. FU4305, A4305 & ENS j.nr. 7903-030......Further development of the Wave Dragon wave energy converter in preparation for full-scale demonstration in the North Sea, PHASE A. FU4305, A4305 & ENS j.nr. 7903-030...

  5. Model Testing of Hydraulic Damping of the Reflector Joint on Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    Further development of the Wave Dragon wave energy converter in preparation for full-scale demonstration in the North Sea, PHASE A. FU4305, A4305 & ENS j.nr. 7903-030......Further development of the Wave Dragon wave energy converter in preparation for full-scale demonstration in the North Sea, PHASE A. FU4305, A4305 & ENS j.nr. 7903-030...

  6. Geometric Properties of AR(q) Nonlinear Regression Models

    Institute of Scientific and Technical Information of China (English)

    LIUYing-ar; WEIBo-cheng

    2004-01-01

    This paper is devoted to a study of geometric properties of AR(q) nonlinear regression models. We present geometric frameworks for regression parameter space and autoregression parameter space respectively based on the weighted inner product by fisher information matrix. Several geometric properties related to statistical curvatures are given for the models. The results of this paper extended the work of Bates & Watts(1980,1988)[1.2] and Seber & Wild (1989)[3].

  7. Geometrical modeling of fibrous materials under compression

    Science.gov (United States)

    Maze, Benoit; Tafreshi, Hooman Vahedi; Pourdeyhimi, Behnam

    2007-10-01

    Many fibrous materials such as nonwovens are consolidated via compaction rolls in a so-called calendering process. Hot rolls compress the fiber assembly and cause fiber-to-fiber bonding resulting in a strong yet porous structure. In this paper, we describe an algorithm for generating three dimensional virtual fiberwebs and simulating the geometrical changes that happen to the structure during the calendering process. Fibers are assumed to be continuous filaments with square cross sections lying randomly in the x or y direction. The fibers are assumed to be flexible to allow bending over one another during the compression process. Lateral displacement is not allowed during the compaction process. The algorithm also does not allow the fibers to interpenetrate or elongate and so the mass of the fibers is conserved. Bending of the fibers is modeled either by considering a constant "slope of bending" or constant "span of bending." The influence of the bending parameters on the propagation of compression through the material's thickness is discussed. In agreement with our experimental observations, it was found that the average solid volume fraction profile across the thickness becomes U shaped after the calendering. The application of these virtual structures in studying transport phenomena in fibrous materials is also demonstrated.

  8. SpaceX Dragon Air Circulation System

    Science.gov (United States)

    Hernandez, Brenda; Piatrovich, Siarhei; Prina, Mauro

    2011-01-01

    The Dragon capsule is a reusable vehicle being developed by Space Exploration Technologies (SpaceX) that will provide commercial cargo transportation to the International Space Station (ISS). Dragon is designed to be a habitable module while it is berthed to ISS. As such, the Dragon Environmental Control System (ECS) consists of pressure control and pressure equalization, air sampling, fire detection, illumination, and an air circulation system. The air circulation system prevents pockets of stagnant air in Dragon that can be hazardous to the ISS crew. In addition, through the inter-module duct, the air circulation system provides fresh air from ISS into Dragon. To utilize the maximum volume of Dragon for cargo packaging, the Dragon ECS air circulation system is designed around cargo rack optimization. At the same time, the air circulation system is designed to meet the National Aeronautics Space Administration (NASA) inter-module and intra-module ventilation requirements and acoustic requirements. A flight like configuration of the Dragon capsule including the air circulation system was recently assembled for testing to assess the design for inter-module and intra-module ventilation and acoustics. The testing included the Dragon capsule, and flight configuration in the pressure section with cargo racks, lockers, all of the air circulation components, and acoustic treatment. The air circulation test was also used to verify the Computational Fluid Dynamics (CFD) model of the Dragon capsule. The CFD model included the same Dragon internal geometry that was assembled for the test. This paper will describe the Dragon air circulation system design which has been verified by testing the system and with CFD analysis.

  9. Geometric deviation modeling by kinematic matrix based on Lagrangian coordinate

    Science.gov (United States)

    Liu, Weidong; Hu, Yueming; Liu, Yu; Dai, Wanyi

    2015-09-01

    Typical representation of dimension and geometric accuracy is limited to the self-representation of dimension and geometric deviation based on geometry variation thinking, yet the interactivity affection of geometric variation and gesture variation of multi-rigid body is not included. In this paper, a kinematic matrix model based on Lagrangian coordinate is introduced, with the purpose of unified model for geometric variation and gesture variation and their interactive and integrated analysis. Kinematic model with joint, local base and movable base is built. The ideal feature of functional geometry is treated as the base body; the fitting feature of functional geometry is treated as the adjacent movable body; the local base of the kinematic model is fixed onto the ideal geometry, and the movable base of the kinematic model is fixed onto the fitting geometry. Furthermore, the geometric deviation is treated as relative location or rotation variation between the movable base and the local base, and it's expressed by the Lagrangian coordinate. Moreover, kinematic matrix based on Lagrangian coordinate for different types of geometry tolerance zones is constructed, and total freedom for each kinematic model is discussed. Finally, the Lagrangian coordinate library, kinematic matrix library for geometric deviation modeling is illustrated, and an example of block and piston fits is introduced. Dimension and geometric tolerances of the shaft and hole fitting feature are constructed by kinematic matrix and Lagrangian coordinate, and the results indicate that the proposed kinematic matrix is capable and robust in dimension and geometric tolerances modeling.

  10. Geometrically nonlinear creeping mathematic models of shells with variable thickness

    Directory of Open Access Journals (Sweden)

    V.M. Zhgoutov

    2012-08-01

    Full Text Available Calculations of strength, stability and vibration of shell structures play an important role in the design of modern devices machines and structures. However, the behavior of thin-walled structures of variable thickness during which geometric nonlinearity, lateral shifts, viscoelasticity (creep of the material, the variability of the profile take place and thermal deformation starts up is not studied enough.In this paper the mathematical deformation models of variable thickness shells (smoothly variable and ribbed shells, experiencing either mechanical load or permanent temperature field and taking into account the geometrical nonlinearity, creeping and transverse shear, were developed. The refined geometrical proportions for geometrically nonlinear and steadiness problems are given.

  11. 3D facial geometric features for constrained local model

    NARCIS (Netherlands)

    Cheng, Shiyang; Zafeiriou, Stefanos; Asthana, Akshay; Pantic, Maja

    2014-01-01

    We propose a 3D Constrained Local Model framework for deformable face alignment in depth image. Our framework exploits the intrinsic 3D geometric information in depth data by utilizing robust histogram-based 3D geometric features that are based on normal vectors. In addition, we demonstrate the fusi

  12. Some geometric models of ancient astronomy with Geogebra

    Directory of Open Access Journals (Sweden)

    Leandro Tortosa

    2010-05-01

    Full Text Available The main objective of this work is to review and simulate, with the help of GeoGebra, the most important geometric models used by the ancient astronomers to explain the mechanisms governing the trajectories of celestial bodies in the sky. It is well known that ancient astronomers like Ptolemy, Copernicus, Galileo, invented the same complex geometric systems of circles to explain the motion of the celestial bodies. It was not until Kepler, with the introduction of conics in the geometric models, that it was possible to accurately explain the observations with theoretical models.

  13. Multipartite geometric entanglement in finite size XY model

    Energy Technology Data Exchange (ETDEWEB)

    Blasone, Massimo; Dell' Anno, Fabio; De Siena, Silvio; Giampaolo, Salvatore Marco; Illuminati, Fabrizio, E-mail: blasone@sa.infn.i [Dipartimento di Matematica e Informatica, Universita degli Studi di Salerno, Via Ponte don Melillo, I-84084 Fisciano (Italy)

    2009-06-01

    We investigate the behavior of the multipartite entanglement in the finite size XY model by means of the hierarchical geometric measure of entanglement. By selecting specific components of the hierarchy, we study both global entanglement and genuinely multipartite entanglement.

  14. A geometric construction of traveling waves in a bioremediation model

    NARCIS (Netherlands)

    Beck, M.A.; Doelman, A.; Kaper, T.J.

    2006-01-01

    Bioremediation is a promising technique for cleaning contaminated soil. We study an idealized bioremediation model involving a substrate (contaminant to be removed), electron acceptor (added nutrient), and microorganisms in a one-dimensional soil column. Using geometric singular perturbation theory,

  15. Integration of geometric modeling and advanced finite element preprocessing

    Science.gov (United States)

    Shephard, Mark S.; Finnigan, Peter M.

    1987-01-01

    The structure to a geometry based finite element preprocessing system is presented. The key features of the system are the use of geometric operators to support all geometric calculations required for analysis model generation, and the use of a hierarchic boundary based data structure for the major data sets within the system. The approach presented can support the finite element modeling procedures used today as well as the fully automated procedures under development.

  16. Assessment of platelet-derived growth factor using A splinted full thickness dermal wound model in bearded dragons (Pogona vitticeps).

    Science.gov (United States)

    Keller, Krista A; Paul-Murphy, Joanne; Weber, E P Scott; Kass, Philip H; Guzman, Sanchez-Migallon David; Park, Shin Ae; Raghunathan, Vijay Krishna; Gustavsen, Kate A; Murphy, Christopher J

    2014-12-01

    Wounds in reptiles are a common reason for presentation to a veterinarian. At this time there is limited information on effective topical medications to aid in wound closure. The objectives of this study were to translate the splinted, full-thickness dermal wound model, validated in mice, to the bearded dragon (Pogona vitticeps) and to determine the effect of topical becaplermin (BP), a platelet-derived growth factor (0.01%), on the rate of wound closure. Ten bearded dragons were anesthetized and two full-thickness cutaneous wounds were made on the dorsum of each lizard. Encircling splints were applied surrounding each wound and subsequently covered by a semi-occlusive dressing. Five lizards had one wound treated with BP and the adjacent wound treated with a vehicle control. Five additional lizards had one wound treated with saline and the second wound treated with a vehicle control. Wounds were imaged daily, and the wound area was measured using digital image analysis. The change in percentage wound closure over 17 days and the time to 50% wound closure was compared among the four treatment groups. There was no significant difference in wound closure rates between BP-treated and saline-treated wounds or in the time to 50% wound closure between any treatments. Vehicle-treated wounds adjacent to saline-treated wounds closed significantly slower than did BP (P < 0.010), saline (P < 0.001), and vehicle-treated wounds adjacent to BP-treated wounds (P < 0.013). Our preliminary study indicates that the splinted wound model, with modifications, may be used to determine wound closure rates in bearded dragons. When compared with saline, BP did not have a significant effect on wound closure rates, while the vehicle alone delayed wound closure. Histologic analysis of experimentally created wounds throughout the wound healing process is needed to further evaluate the effects of these treatments on reptile dermal wound healing.

  17. Dragons as Amulets, Dragons as Talismans, Dragons as Counselors.

    Science.gov (United States)

    Stevenson, Robert G.

    1994-01-01

    Notes that, in diverse historical and cultural settings, dragons have served as protective amulets/powerful talismans to protect/enhance powers of those who possess them. Explores use of such personal symbols in dealing with personal adversity and suggests methods in which dragon symbol can be used to promote discussion of feelings, problems, and…

  18. Sigma models for genuinely non-geometric backgrounds

    CERN Document Server

    Chatzistavrakidis, Athanasios; Lechtenfeld, Olaf

    2015-01-01

    The existence of genuinely non-geometric backgrounds, i.e. ones without geometric dual, is an important question in string theory. In this paper we examine this question from a sigma model perspective. First we construct a particular class of Courant algebroids as protobialgebroids with all types of geometric and non-geometric fluxes. For such structures we apply the mathematical result that any Courant algebroid gives rise to a 3D topological sigma model of the AKSZ type and we discuss the corresponding 2D field theories. It is found that these models are always geometric, even when both 2-form and 2-vector fields are neither vanishing nor inverse of one another. Taking a further step, we suggest an extended class of 3D sigma models, whose world volume is embedded in phase space, which allow for genuinely non-geometric backgrounds. Adopting the doubled formalism such models can be related to double field theory, albeit from a world sheet perspective.

  19. Multiscale geometric modeling of macromolecules II: Lagrangian representation.

    Science.gov (United States)

    Feng, Xin; Xia, Kelin; Chen, Zhan; Tong, Yiying; Wei, Guo-Wei

    2013-09-15

    Geometric modeling of biomolecules plays an essential role in the conceptualization of biolmolecular structure, function, dynamics, and transport. Qualitatively, geometric modeling offers a basis for molecular visualization, which is crucial for the understanding of molecular structure and interactions. Quantitatively, geometric modeling bridges the gap between molecular information, such as that from X-ray, NMR, and cryo-electron microscopy, and theoretical/mathematical models, such as molecular dynamics, the Poisson-Boltzmann equation, and the Nernst-Planck equation. In this work, we present a family of variational multiscale geometric models for macromolecular systems. Our models are able to combine multiresolution geometric modeling with multiscale electrostatic modeling in a unified variational framework. We discuss a suite of techniques for molecular surface generation, molecular surface meshing, molecular volumetric meshing, and the estimation of Hadwiger's functionals. Emphasis is given to the multiresolution representations of biomolecules and the associated multiscale electrostatic analyses as well as multiresolution curvature characterizations. The resulting fine resolution representations of a biomolecular system enable the detailed analysis of solvent-solute interaction, and ion channel dynamics, whereas our coarse resolution representations highlight the compatibility of protein-ligand bindings and possibility of protein-protein interactions.

  20. Geometric modeling of subcellular structures, organelles, and multiprotein complexes

    Science.gov (United States)

    Feng, Xin; Xia, Kelin; Tong, Yiying; Wei, Guo-Wei

    2013-01-01

    SUMMARY Recently, the structure, function, stability, and dynamics of subcellular structures, organelles, and multi-protein complexes have emerged as a leading interest in structural biology. Geometric modeling not only provides visualizations of shapes for large biomolecular complexes but also fills the gap between structural information and theoretical modeling, and enables the understanding of function, stability, and dynamics. This paper introduces a suite of computational tools for volumetric data processing, information extraction, surface mesh rendering, geometric measurement, and curvature estimation of biomolecular complexes. Particular emphasis is given to the modeling of cryo-electron microscopy data. Lagrangian-triangle meshes are employed for the surface presentation. On the basis of this representation, algorithms are developed for surface area and surface-enclosed volume calculation, and curvature estimation. Methods for volumetric meshing have also been presented. Because the technological development in computer science and mathematics has led to multiple choices at each stage of the geometric modeling, we discuss the rationales in the design and selection of various algorithms. Analytical models are designed to test the computational accuracy and convergence of proposed algorithms. Finally, we select a set of six cryo-electron microscopy data representing typical subcellular complexes to demonstrate the efficacy of the proposed algorithms in handling biomolecular surfaces and explore their capability of geometric characterization of binding targets. This paper offers a comprehensive protocol for the geometric modeling of subcellular structures, organelles, and multiprotein complexes. PMID:23212797

  1. Geometric models of (d+1)-dimensional relativistic rotating oscillators

    CERN Document Server

    Cotaescu, I I

    2000-01-01

    Geometric models of quantum relativistic rotating oscillators in arbitrary dimensions are defined on backgrounds with deformed anti-de Sitter metrics. It is shown that these models are analytically solvable, deriving the formulas of the energy levels and corresponding normalized energy eigenfunctions. An important property is that all these models have the same nonrelativistic limit, namely the usual harmonic oscillator.

  2. Design of the Wave Dragon Mooring System

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano

    This report is part of the project “Wave Dragon 1.5 MW North Sea Demonstrator”, funded by the Danish Energy Agency under the EUDP program (J.no. 64010-0405). In phase 1 of the project the hydrodynamic characterization of Wave Dragon was carried out through numerical analysis with a model calibrated...... storm conditions typical of the DanWEC location. The most desirable mooring configuration has also been better defined in terms of horizontal compliance. In phase 3 results from phase 1 shall be used to setup a numerical model for time-domain analysis of the composite system Wave Dragon + moorings...

  3. A Geometric Model for the Dynamics of Microchannel Emulsification

    NARCIS (Netherlands)

    Zwan, van der E.A.; Schroën, C.G.P.H.; Boom, R.M.

    2009-01-01

    Microchannel emulsification is an interfacial tension driven method to produce monodisperse microdroplets, or microspheres. In this paper we introduce a model for describing the dynamics of microchannel emulsification based on simple time dependent geometric shape analysis. The model is based on mec

  4. A geometric representation for the Proca model

    CERN Document Server

    Camacaro, J; Leal, L C; Camacaro, Jaime; Gaitan, Rolando; Leal, Lorenzo

    1996-01-01

    The Proca model is quantized in an open-path dependent representation that generalizes the Loop Representation of gauge theories. The starting point is a gauge invariant Lagrangian that reduces to the Proca Lagrangian when certain gauge is selected.

  5. Geometric Reid's recipe for dimer models

    NARCIS (Netherlands)

    Bocklandt, R.; Craw, A.; Quintero Vélez, A.

    2015-01-01

    Crepant resolutions of three-dimensional toric Gorenstein singularities are derived equivalent to noncommutative algebras arising from consistent dimer models. By choosing a special stability parameter and hence a distinguished crepant resolution Y, this derived equivalence generalises the Fourier-M

  6. Fuzzy Clustering Using the Convex Hull as Geometrical Model

    Directory of Open Access Journals (Sweden)

    Luca Liparulo

    2015-01-01

    Full Text Available A new approach to fuzzy clustering is proposed in this paper. It aims to relax some constraints imposed by known algorithms using a generalized geometrical model for clusters that is based on the convex hull computation. A method is also proposed in order to determine suitable membership functions and hence to represent fuzzy clusters based on the adopted geometrical model. The convex hull is not only used at the end of clustering analysis for the geometric data interpretation but also used during the fuzzy data partitioning within an online sequential procedure in order to calculate the membership function. Consequently, a pure fuzzy clustering algorithm is obtained where clusters are fitted to the data distribution by means of the fuzzy membership of patterns to each cluster. The numerical results reported in the paper show the validity and the efficacy of the proposed approach with respect to other well-known clustering algorithms.

  7. GEOMETRIC METHOD OF SEQUENTIAL ESTIMATION RELATED TO MULTINOMIAL DISTRIBUTION MODELS

    Institute of Scientific and Technical Information of China (English)

    WEIBOCHENG; LISHOUYE

    1995-01-01

    In 1980's differential geometric methods are successfully used to study curved expomential families and normal nonlinear regression models.This paper presents a new geometric structure to study multinomial distribution models which contain a set of nonlinear parameters.Based on this geometric structure,the suthors study several asymptotic properties for sequential estimation.The bias,the variance and the information loss of the sequential estimates are given from geomentric viewpoint,and a limit theorem connected with the observed and expected Fisher information is obtained in terms of curvatvre measures.The results show that the sequential estimation procednce has some better properties which are generally impossible for nonsequential estimation procedures.

  8. Geometric Reid's recipe for dimer models

    CERN Document Server

    Bocklandt, Raf; Velez, Alexander Quintero

    2013-01-01

    Crepant resolutions of three-dimensional toric Gorenstein singularities are derived equivalent to noncommutative algebras arising from consistent dimer models. By choosing a special stability parameter and hence a distinguished crepant resolution $Y$, this derived equivalence generalises the Fourier-Mukai transform relating the $G$-Hilbert scheme and the skew group algebra $\\CC[x,y,z]\\ast G$ for a finite abelian subgroup of $\\SL(3,\\CC)$. We show that this equivalence sends the vertex simples to pure sheaves, except for the zero vertex which is mapped to the dualising complex of the compact exceptional locus. This generalises results of Cautis-Logvinenko and Cautis-Craw-Logvinenko to the dimer setting, though our approach is different in each case. We also describe some of these pure sheaves explicitly and compute the support of the remainder, providing a dimer model analogue of results from Logvinenko.

  9. Variations of Shape in Industrial Geometric Models

    OpenAIRE

    Veelo, Bastiaan Niels

    2004-01-01

    This thesis presents an approach to free-form surface manipulations, which conceptually improves an existing CAD system that constructs surfaces by smoothly interpolating a network of intersecting curves. There are no regularity requirements on the network, which already yields superior modelling capabilities compared to systems that are based on industry-standard NURBS surfaces. Originally, the shape of such a surface can be modified only locally by manipulating a curve in the network. In t...

  10. A Robust Geometric Model for Argument Classification

    Science.gov (United States)

    Giannone, Cristina; Croce, Danilo; Basili, Roberto; de Cao, Diego

    Argument classification is the task of assigning semantic roles to syntactic structures in natural language sentences. Supervised learning techniques for frame semantics have been recently shown to benefit from rich sets of syntactic features. However argument classification is also highly dependent on the semantics of the involved lexicals. Empirical studies have shown that domain dependence of lexical information causes large performance drops in outside domain tests. In this paper a distributional approach is proposed to improve the robustness of the learning model against out-of-domain lexical phenomena.

  11. Effects of heat, pH, antioxidant, agitation and light on betacyanin stability using red-fleshed dragon fruit (Hylocereus polyrhizus) juice and concentrate as models.

    Science.gov (United States)

    Wong, Yen-Ming; Siow, Lee-Fong

    2015-05-01

    Red-fleshed dragon fruit (Hylocereus polyrhizus) is rich in antioxidants. The aim of this study was to determine the effects of heat pasteurization, pH adjustment, ascorbic acid addition as well as storage under agitation and light or dark condition on betacyanin content in red-fleshed dragon fruit (Hylocereus polyrhizus) juice and concentrate. The concentrate was produced by concentrating clarified red-fleshed dragon fruit juice in a rotary evaporator at 40 °C. UV-Visible spectrophotometer was used for analyzing betacyanin content. Addition of 0.25 % ascorbic acid, pH 4.0, and pasteurization at 65 °C for 30 min were selected as the best processing conditions to retain betacyanin content in red-fleshed dragon fruit juice. Storage at the agitation speed of 220 rpm showed that the concentrated samples had higher betacyanin stability compared to juice, while both juice and concentrate had almost similar betacyanin stability when tested for storage in the presence of light. In summary, ascorbic acid stabilized betacyanin in both juice and concentrate at agitated or non-agitated conditions. In contrast, light degraded betacyanin in both juice and concentrate models.

  12. Geometric accuracy of wax bade models manufactured in silicon moulds

    Directory of Open Access Journals (Sweden)

    G. Budzik

    2010-01-01

    Full Text Available The article presents the test results of the geometric accuracy of wax blade models manufactured in silicon moulds in the Rapid Tooling process, with the application of the Vacuum Casting technology. In batch production casting waxes are designed for the manufacture of models and components of model sets through injection into a metal die. The objective of the tests was to determine the possibility of using traditional wax for the production of casting models in the rapid prototyping process. Blade models made of five types of casting wax were measured. The definition of the geometric accuracy of wax blade models makes it possible to introduce individual modifications aimed at improving their shape in order to increase the dimensional accuracy of blade models manufactured in the rapid prototyping process.

  13. Dragon bridge - the world largest dragon-shaped (ARCH steel bridge as element of smart city

    Directory of Open Access Journals (Sweden)

    Chinh Luong Minh

    2016-01-01

    Full Text Available Dragon Bridge - The world’s largest dragon-shaped steel bridge, with an installation cost of $85 million USD, features 6 lanes for two separate directions, 666 meters of undulating steel in the shape of a dragon in the Ly Dynasty, the symbol of prosperity in Vietnamese culture. This unique and beautifully lit bridge, which also breathes fire and sprays water. It’s the purposeful integration of the lighting hardware articulates the dragon’s form, and the fire-breathing dragon head. This project transcends the notion of monumental bridge with dynamic colour-changing lighting, creating an iconic sculpture in the skyline that is both reverent and whimsical. The signature feature of the bridge was the massive undulating support structure resembling a dragon flying over the river. The dragon is prominent in Vietnamese culture as a symbol of power and nobility. Dragon Bridge stands out as a model of innovation. It has received worldwide attention in the design community and from the global media for its unique arch support system. Dragon Bridge serves as an example of how aesthetic quality of a design can serve cultural, economic and functional purposes. The article presents design solutions of the object and the evaluation of the technical condition before putting the facility into service.

  14. Multiscale geometric modeling of macromolecules I: Cartesian representation.

    Science.gov (United States)

    Xia, Kelin; Feng, Xin; Chen, Zhan; Tong, Yiying; Wei, Guo Wei

    2014-01-01

    This paper focuses on the geometric modeling and computational algorithm development of biomolecular structures from two data sources: Protein Data Bank (PDB) and Electron Microscopy Data Bank (EMDB) in the Eulerian (or Cartesian) representation. Molecular surface (MS) contains non-smooth geometric singularities, such as cusps, tips and self-intersecting facets, which often lead to computational instabilities in molecular simulations, and violate the physical principle of surface free energy minimization. Variational multiscale surface definitions are proposed based on geometric flows and solvation analysis of biomolecular systems. Our approach leads to geometric and potential driven Laplace-Beltrami flows for biomolecular surface evolution and formation. The resulting surfaces are free of geometric singularities and minimize the total free energy of the biomolecular system. High order partial differential equation (PDE)-based nonlinear filters are employed for EMDB data processing. We show the efficacy of this approach in feature-preserving noise reduction. After the construction of protein multiresolution surfaces, we explore the analysis and characterization of surface morphology by using a variety of curvature definitions. Apart from the classical Gaussian curvature and mean curvature, maximum curvature, minimum curvature, shape index, and curvedness are also applied to macromolecular surface analysis for the first time. Our curvature analysis is uniquely coupled to the analysis of electrostatic surface potential, which is a by-product of our variational multiscale solvation models. As an expository investigation, we particularly emphasize the numerical algorithms and computational protocols for practical applications of the above multiscale geometric models. Such information may otherwise be scattered over the vast literature on this topic. Based on the curvature and electrostatic analysis from our multiresolution surfaces, we introduce a new concept, the

  15. Geometric interpretation for the interacting-boson-fermion model

    Energy Technology Data Exchange (ETDEWEB)

    Leviatan, A.

    1988-08-11

    A geometric oriented approach for studying the interacting-boson-fermion model for odd-A nuclei is presented. A deformed single-particle hamiltonian is derived by means of an algebraic Born-Oppenheimer treatment. Observables concerning spectrum and transitions are calculated for the case of a single-j fermion coupled to a prolate core charge boson number and arbitrary deformations.

  16. Duals for classical inventory models via generalized geometric programming

    OpenAIRE

    Carlton H. Scott; Thomas R. Jefferson; Soheila Jorjani

    2004-01-01

    Inventory problems generally have a structure that can be exploited for computational purposes. Here, we look at the duals of two seemingly unrelated inventory models that suggest an interesting duality between discrete time optimal control and optimization over an ordered sequence of variables. Concepts from conjugate duality and generalized geometric programming are used to establish the duality.

  17. Three dimensional geometric modeling of processing-tomatoes

    Science.gov (United States)

    Characterizing tomato geometries with different shapes and sizes would facilitate the design of tomato processing equipments and promote computer-based engineering simulations. This research sought to develop a three-dimensional geometric model that can describe the morphological attributes of proce...

  18. AUTOMATIC MESH GENERATION OF 3-D GEOMETRIC MODELS

    Institute of Scientific and Technical Information of China (English)

    刘剑飞

    2003-01-01

    In this paper the presentation of the ball-packing method is reviewed,and a scheme to generate mesh for complex 3-D geometric models is given,which consists of 4 steps:(1)create nodes in 3-D models by ball-packing method,(2)connect nodes to generate mesh by 3-D Delaunay triangulation,(3)retrieve the boundary of the model after Delaunay triangulation,(4)improve the mesh.

  19. DIGITAL GEOMETRIC MODELLING OF TEETH PROFILE BY USING CAD METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Krzysztof TWARDOCH

    2014-03-01

    Full Text Available This article is devoted to the problem of properly defining the spatial model of tooth profile with CAD methodologies. Moved by the problem of the accuracy of the mapping defined curves describing the geometry of the teeth. Particular attention was paid to precise geometric modeling involute tooth profile, which has a significant influence on the process of identifying the mesh stiffness for tests performed on the dynamic phenomena occurring in the gear transmission systems conducted using dynamic models

  20. Experimental Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Kofoed, Jens Peter

    The Wave Dragon is a floating slack-moored Wave Energy Converter (WEC) of the overtopping type. Oncoming waves are focused by two wing reflectors towards the ramp of the device, surge-up and overtop into a reservoir placed at a higher level than the surface of the sea. The energy production takes...... place as the water is led back to the sea through a set of low-head hydro-turbines. After many years of development, Wave Dragon (WD) is now facing the phase of pre-commercial demonstration. In this phase it is very important to be able to use the available data to predict the performances of the device...... form) is transferred to the device in the form of volumes of water coming into the reservoir. These volumes are stored at a higher level than the surrounding sea, being a stock of potential energy. 2. Secondary energy conversion: turbines – The potential energy stored in the reservoir is transformed...

  1. Comparison and Analysis of Geometric Correction Models of Spaceborne SAR.

    Science.gov (United States)

    Jiang, Weihao; Yu, Anxi; Dong, Zhen; Wang, Qingsong

    2016-06-25

    Following the development of synthetic aperture radar (SAR), SAR images have become increasingly common. Many researchers have conducted large studies on geolocation models, but little work has been conducted on the available models for the geometric correction of SAR images of different terrain. To address the terrain issue, four different models were compared and are described in this paper: a rigorous range-doppler (RD) model, a rational polynomial coefficients (RPC) model, a revised polynomial (PM) model and an elevation derivation (EDM) model. The results of comparisons of the geolocation capabilities of the models show that a proper model for a SAR image of a specific terrain can be determined. A solution table was obtained to recommend a suitable model for users. Three TerraSAR-X images, two ALOS-PALSAR images and one Envisat-ASAR image were used for the experiment, including flat terrain and mountain terrain SAR images as well as two large area images. Geolocation accuracies of the models for different terrain SAR images were computed and analyzed. The comparisons of the models show that the RD model was accurate but was the least efficient; therefore, it is not the ideal model for real-time implementations. The RPC model is sufficiently accurate and efficient for the geometric correction of SAR images of flat terrain, whose precision is below 0.001 pixels. The EDM model is suitable for the geolocation of SAR images of mountainous terrain, and its precision can reach 0.007 pixels. Although the PM model does not produce results as precise as the other models, its efficiency is excellent and its potential should not be underestimated. With respect to the geometric correction of SAR images over large areas, the EDM model has higher accuracy under one pixel, whereas the RPC model consumes one third of the time of the EDM model.

  2. Comparison and Analysis of Geometric Correction Models of Spaceborne SAR

    Directory of Open Access Journals (Sweden)

    Weihao Jiang

    2016-06-01

    Full Text Available Following the development of synthetic aperture radar (SAR, SAR images have become increasingly common. Many researchers have conducted large studies on geolocation models, but little work has been conducted on the available models for the geometric correction of SAR images of different terrain. To address the terrain issue, four different models were compared and are described in this paper: a rigorous range-doppler (RD model, a rational polynomial coefficients (RPC model, a revised polynomial (PM model and an elevation derivation (EDM model. The results of comparisons of the geolocation capabilities of the models show that a proper model for a SAR image of a specific terrain can be determined. A solution table was obtained to recommend a suitable model for users. Three TerraSAR-X images, two ALOS-PALSAR images and one Envisat-ASAR image were used for the experiment, including flat terrain and mountain terrain SAR images as well as two large area images. Geolocation accuracies of the models for different terrain SAR images were computed and analyzed. The comparisons of the models show that the RD model was accurate but was the least efficient; therefore, it is not the ideal model for real-time implementations. The RPC model is sufficiently accurate and efficient for the geometric correction of SAR images of flat terrain, whose precision is below 0.001 pixels. The EDM model is suitable for the geolocation of SAR images of mountainous terrain, and its precision can reach 0.007 pixels. Although the PM model does not produce results as precise as the other models, its efficiency is excellent and its potential should not be underestimated. With respect to the geometric correction of SAR images over large areas, the EDM model has higher accuracy under one pixel, whereas the RPC model consumes one third of the time of the EDM model.

  3. Talking about Dragon in the Dragon Year

    Institute of Scientific and Technical Information of China (English)

    Liu Zhiyang

    2012-01-01

    In the five-thousand-year history of Chinese nation,dragon is the embodiment of Chinese culture,It represents the profound cultural deposits and expresses the cultural features of China.The characteristics of dragon are snake's body,eagle's claws,deer's antlers and tiger's teeth-the most featured and powerful pans from various animals.It indicates that Chinese culture absorbs merits of other cultures and integrates them,which is also the distinctive feature of Chinese culture.

  4. Hadron Dragons strike again

    CERN Multimedia

    2009-01-01

    The CERN Dragon Boat team – the Hadron Dragons – achieved a fantastic result at the "Paddle for Cancer" Dragon Boat Festival at Lac de Joux on 6 September. CERN Hadron Dragons heading for the start line.Under blue skies and on a clear lake, the Hadron Dragons won 2nd place in a hard-fought final, following top times in the previous heats. In a close and dramatic race – neck-and-neck until the final 50 metres – the local Lac-de-Joux team managed to inch ahead at the last moment. The Hadron Dragons were delighted to take part in this festival. No one would turn down a day out in such a friendly and fun atmosphere, but the Dragons were also giving their support to cancer awareness and fund-raising in association with ESCA (English-Speaking Cancer Association of Geneva). Riding on their great success in recent competitions, the Hadron Dragons plan to enter the last Dragon Boat festival of 2009 in Annecy on 17-18 October. This will coincide with t...

  5. Geometric Modeling and Reasoning of Human-Centered Freeform Products

    CERN Document Server

    Wang, Charlie C L

    2013-01-01

    The recent trend in user-customized product design requires the shape of products to be automatically adjusted according to the human body’s shape, so that people will feel more comfortable when wearing these products.  Geometric approaches can be used to design the freeform shape of products worn by people, which can greatly improve the efficiency of design processes in various industries involving customized products (e.g., garment design, toy design, jewel design, shoe design, and design of medical devices, etc.). These products are usually composed of very complex geometric shapes (represented by free-form surfaces), and are not driven by a parameter table but a digital human model with free-form shapes or part of human bodies (e.g., wrist, foot, and head models).   Geometric Modeling and Reasoning of Human-Centered Freeform Products introduces the algorithms of human body reconstruction, freeform product modeling, constraining and reconstructing freeform products, and shape optimization for improving...

  6. A Physical – Geometrical Model of an Early Universe

    Directory of Open Access Journals (Sweden)

    Corneliu BERBENTE

    2014-12-01

    Full Text Available A physical-geometrical model for a possible early universe is proposed. One considers an initial singularity containing the energy of the whole universe. The singularity expands as a spherical wave at the speed of light generating space and time. The relations of the special theory of relativity, quantum mechanics and gas kinetics are considered applicable. A structuring of the primary wave is adopted on reasons of geometrical simplicity as well as on satisfying the conservation laws. The evolution is able to lead to particles very close to neutrons as mass and radius. The actually admitted values for the radius and mass of the universe as well as the temperature of the ground radiation (3-5 K can be obtained by using the proposed model.

  7. Image-Based Geometric Modeling and Mesh Generation

    CERN Document Server

    2013-01-01

    As a new interdisciplinary research area, “image-based geometric modeling and mesh generation” integrates image processing, geometric modeling and mesh generation with finite element method (FEM) to solve problems in computational biomedicine, materials sciences and engineering. It is well known that FEM is currently well-developed and efficient, but mesh generation for complex geometries (e.g., the human body) still takes about 80% of the total analysis time and is the major obstacle to reduce the total computation time. It is mainly because none of the traditional approaches is sufficient to effectively construct finite element meshes for arbitrarily complicated domains, and generally a great deal of manual interaction is involved in mesh generation. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion,...

  8. Geometrical model fitting for interferometric data: GEM-FIND

    CERN Document Server

    Klotz, D; Paladini, C; Hron, J; Wachter, G

    2012-01-01

    We developed the tool GEM-FIND that allows to constrain the morphology and brightness distribution of objects. The software fits geometrical models to spectrally dispersed interferometric visibility measurements in the N-band using the Levenberg-Marquardt minimization method. Each geometrical model describes the brightness distribution of the object in the Fourier space using a set of wavelength-independent and/or wavelength-dependent parameters. In this contribution we numerically analyze the stability of our nonlinear fitting approach by applying it to sets of synthetic visibilities with statistically applied errors, answering the following questions: How stable is the parameter determination with respect to (i) the number of uv-points, (ii) the distribution of points in the uv-plane, (iii) the noise level of the observations?

  9. A Dynamical model for non-geometric quantum black holes

    CERN Document Server

    Spallucci, Euro

    2016-01-01

    It has been recently proposed that quantum black holes can be described as N-graviton Bose-Einstein condensates. In this picture the quantum properties of BHs "... can be understood in terms of the single number N". However, so far, the dynamical origin of the occupational number N has not been specified. This description is alternative to the usual one, where black holes are believed to be well described geometrically even at the quantum level. In this paper we pursue the former point of view and develop a non-geometrical dynamical model of quantum black holes (BHs). In our model the occupational number N is proportional to the principal quantum number n of a Planckian harmonic oscillator. The so-called "classicalization" corresponds to the large-n limit, where the Schwarzschild horizon is recovered.

  10. Time evolution in a geometric model of a particle

    CERN Document Server

    Atiyah, Michael; Schroers, Bernd

    2014-01-01

    We analyse the properties of a (4+1)-dimensional Ricci-flat spacetime which may be viewed as an evolving Taub-NUT geometry, and give exact solutions of the Maxwell and gauged Dirac equation on this background. We interpret these solutions in terms of a geometric model of the electron and its spin, and discuss links between the resulting picture and Dirac's Large Number Hypothesis.

  11. Plaster-Wrap Dragons

    Science.gov (United States)

    Vance, Shelly

    2012-01-01

    In this article, the author describes how her students constructed a three-dimensional sculpture of a dragon using plaster wrap and other materials. The dragons were formed from modest means--using only a toilet-paper tube, newsprint, tape and wire.

  12. Plaster-Wrap Dragons

    Science.gov (United States)

    Vance, Shelly

    2012-01-01

    In this article, the author describes how her students constructed a three-dimensional sculpture of a dragon using plaster wrap and other materials. The dragons were formed from modest means--using only a toilet-paper tube, newsprint, tape and wire.

  13. Geometric Assortative Growth Model for Small-World Networks

    Directory of Open Access Journals (Sweden)

    Yilun Shang

    2014-01-01

    Full Text Available It has been shown that both humanly constructed and natural networks are often characterized by small-world phenomenon and assortative mixing. In this paper, we propose a geometrically growing model for small-world networks. The model displays both tunable small-world phenomenon and tunable assortativity. We obtain analytical solutions of relevant topological properties such as order, size, degree distribution, degree correlation, clustering, transitivity, and diameter. It is also worth noting that the model can be viewed as a generalization for an iterative construction of Farey graphs.

  14. Geometric assortative growth model for small-world networks.

    Science.gov (United States)

    Shang, Yilun

    2014-01-01

    It has been shown that both humanly constructed and natural networks are often characterized by small-world phenomenon and assortative mixing. In this paper, we propose a geometrically growing model for small-world networks. The model displays both tunable small-world phenomenon and tunable assortativity. We obtain analytical solutions of relevant topological properties such as order, size, degree distribution, degree correlation, clustering, transitivity, and diameter. It is also worth noting that the model can be viewed as a generalization for an iterative construction of Farey graphs.

  15. Solving Topological and Geometrical Constraints in Bridge Feature Model

    Institute of Scientific and Technical Information of China (English)

    PENG Weibing; SONG Liangliang; PAN Guoshuai

    2008-01-01

    The capacity that computer can solve more complex design problem was gradually increased.Bridge designs need a breakthrough in the current development limitations, and then become more intelli-gent and integrated. This paper proposes a new parametric and feature-based computer aided design (CAD) models which can represent families of bridge objects, includes knowledge representation, three-dimensional geometric topology relationships. The realization of a family member is found by solving first the geometdc constraints, and then the topological constraints. From the geometric solution, constraint equations are constructed. Topology solution is developed by feature dependencies graph between bridge objects. Finally, feature parameters are proposed to drive bridge design with feature parameters. Results from our implementation show that the method can help to facilitate bridge design.

  16. Scale Problems in Geometric-Kinematic Modelling of Geological Objects

    Science.gov (United States)

    Siehl, Agemar; Thomsen, Andreas

    To reveal, to render and to handle complex geological objects and their history of structural development, appropriate geometric models have to be designed. Geological maps, sections, sketches of strain and stress patterns are such well-known analogous two-dimensional models. Normally, the set of observations and measurements supporting them is small in relation to the complexity of the real objects they derive from. Therefore, modelling needs guidance by additional expert knowledge to bridge empty spaces which are not supported by data. Generating digital models of geological objects has some substantial advantages compared to conventional methods, especially if they are supported by an efficient database management system. Consistent 3D models of some complexity can be created, and experiments with time-dependent geological geometries may help to restore coherent sequences of paleogeological states. In order to cope with the problems arising from the combined usage of 3D-geometry models of different scale and resolution within an information system on subsurface geology, geometrical objects need to be annotated with information on the context, within which the geometry model has been established and within which it is valid, and methods supporting storage and retrieval as well as manipulation of geometry at different scales must also take into account and handle such context information to achieve meaningful results. An example is given of a detailed structural study of an open pit lignite mine in the Lower Rhine Basin.

  17. Do Lumped-Parameter Models Provide the Correct Geometrical Damping?

    DEFF Research Database (Denmark)

    Andersen, Lars

    This paper concerns the formulation of lumped-parameter models for rigid footings on homogenous or stratified soil. Such models only contain a few degrees of freedom, which makes them ideal for inclusion in aero-elastic codes for wind turbines and other models applied to fast evaluation of struct......This paper concerns the formulation of lumped-parameter models for rigid footings on homogenous or stratified soil. Such models only contain a few degrees of freedom, which makes them ideal for inclusion in aero-elastic codes for wind turbines and other models applied to fast evaluation...... response during excitation and the geometrical damping related to free vibrations of a hexagonal footing. The optimal order of a lumped-parameter model is determined for each degree of freedom, i.e. horizontal and vertical translation as well as torsion and rocking. In particular, the necessity of coupling...... between horizontal sliding and rocking is discussed....

  18. Dragon pulse information management system (DPIMS): A unique model-based approach to implementing domain agnostic system of systems and behaviors

    Science.gov (United States)

    Anderson, Thomas S.

    2016-05-01

    The Global Information Network Architecture is an information technology based on Vector Relational Data Modeling, a unique computational paradigm, DoD network certified by USARMY as the Dragon Pulse Informa- tion Management System. This network available modeling environment for modeling models, where models are configured using domain relevant semantics and use network available systems, sensors, databases and services as loosely coupled component objects and are executable applications. Solutions are based on mission tactics, techniques, and procedures and subject matter input. Three recent ARMY use cases are discussed a) ISR SoS. b) Modeling and simulation behavior validation. c) Networked digital library with behaviors.

  19. Comparison of Mooring Loads in Survivability Mode on the Wave Dragon Wave Energy Converter Obtained by a Numerical Model and Experimental Data

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Muliawan, Made Jaya; Gao, Zhen;

    2012-01-01

    to be carried out numerically, through coupled analyses of alternative solutions. The present study deals with the preliminary hydrodynamic characterization of Wave Dragon needed in order to calibrate the numerical model to be used for the mooring design. A hydrodynamic analysis of the small scale model......, with experimental results derived from tank tests of a small scale model. Due to the complex geometry of the device, a sensitivity analysis is performed to discuss the influence of the mean position on the quality of the numerical predictions. Good correspondence is achieved between the experimental and numerical...... model. The numerical model is hence considered reliable for future design applications....

  20. High-fidelity geometric modeling for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Zeyun [Univ. of California, San Diego, CA (United States). Dept. of Mathematics; Holst, Michael J. [Univ. of California, San Diego, CA (United States). Dept. of Mathematics; Andrew McCammon, J. [Univ. of California, San Diego, CA (United States). Dept. of Chemistry and Biochemistry; Univ. of California, San Diego, CA (United States). Dept. of Pharmacology

    2008-05-19

    In this paper, we describe a combination of algorithms for high-fidelity geometric modeling and mesh generation. Although our methods and implementations are application-neutral, our primary target application is multiscale biomedical models that range in scales across the molecular, cellular, and organ levels. Our software toolchain implementing these algorithms is general in the sense that it can take as input a molecule in PDB/PQR forms, a 3D scalar volume, or a user-defined triangular surface mesh that may have very low quality. The main goal of our work presented is to generate high quality and smooth surface triangulations from the aforementioned inputs, and to reduce the mesh sizes by mesh coarsening. Tetrahedral meshes are also generated for finite element analysis in biomedical applications. Experiments on a number of bio-structures are demonstrated, showing that our approach possesses several desirable properties: feature-preservation, local adaptivity, high quality, and smoothness (for surface meshes). Finally, the availability of this software toolchain will give researchers in computational biomedicine and other modeling areas access to higher-fidelity geometric models.

  1. An integrated introduction to computer graphics and geometric modeling

    CERN Document Server

    Goldman, Ronald

    2009-01-01

    … this book may be the first book on geometric modelling that also covers computer graphics. In addition, it may be the first book on computer graphics that integrates a thorough introduction to 'freedom' curves and surfaces and to the mathematical foundations for computer graphics. … the book is well suited for an undergraduate course. … The entire book is very well presented and obviously written by a distinguished and creative researcher and educator. It certainly is a textbook I would recommend. …-Computer-Aided Design, 42, 2010… Many books concentrate on computer programming and soon beco

  2. A geometric model for Hochschild homology of Soergel bimodules

    DEFF Research Database (Denmark)

    Webster, Ben; Williamson, Geordie

    2008-01-01

    An important step in the calculation of the triply graded link homology of Khovanov and Rozansky is the determination of the Hochschild homology of Soergel bimodules for SL(n). We present a geometric model for this Hochschild homology for any simple group G, as B–equivariant intersection cohomology...... of B×B–orbit closures in G. We show that, in type A, these orbit closures are equivariantly formal for the conjugation B–action. We use this fact to show that, in the case where the corresponding orbit closure is smooth, this Hochschild homology is an exterior algebra over a polynomial ring...

  3. Bitten by a Dragon.

    Science.gov (United States)

    Ducey, Stephen D; Cooper, Jeffrey S; Wadman, Michael C

    2016-06-01

    Komodo dragons (Varanus komodoensis) are large lizards known to take down prey even larger than themselves. They rarely attack humans. A 38-year-old woman was bitten by a Komodo dragon on her hand while cleaning its enclosure. She was transiently hypotensive. The wounds were extensively cleaned, and she was started on prophylactic antibiotics. Her wounds healed without any infectious sequelae. Komodo dragon bites are historically thought to be highly infectious and venomous. Based on a literature review, neither of these are likely true. As in any bite, initial stabilization followed by wound management are the main components to therapy.

  4. Formal Relationships Between Geometrical and Classical Models for Concurrency

    CERN Document Server

    Goubault, Eric

    2010-01-01

    A wide variety of models for concurrent programs has been proposed during the past decades, each one focusing on various aspects of computations: trace equivalence, causality between events, conflicts and schedules due to resource accesses, etc. More recently, models with a geometrical flavor have been introduced, based on the notion of cubical set. These models are very rich and expressive since they can represent commutation between any bunch of events, thus generalizing the principle of true concurrency. While they seem to be very promising - because they make possible the use of techniques from algebraic topology in order to study concurrent computations - they have not yet been precisely related to the previous models, and the purpose of this paper is to fill this gap. In particular, we describe an adjunction between Petri nets and cubical sets which extends the previously known adjunction between Petri nets and asynchronous transition systems by Nielsen and Winskel.

  5. Geometric Models of the Quantum Relativistic Rotating Oscillator

    CERN Document Server

    Cotaescu, I I

    1997-01-01

    A family of geometric models of quantum relativistic rotating oscillator is defined by using a set of one-parameter deformations of the static (3+1) de Sitter or anti-de Sitter metrics. It is shown that all these models lead to the usual isotropic harmonic oscillator in the non-relativistic limit, even though their relativistic behavior is different. As in the case of the (1+1) models, these will have even countable energy spectra or mixed ones, with a finite discrete sequence and a continuous part. In addition, all these spectra, except that of the pure anti-de Sitter model, will have a fine-structure, given by a rotator-like term.

  6. Geometric and Textural Blending for 3D Model Stylization.

    Science.gov (United States)

    Huang, YiJheng; Lin, Wen-Chieh; Yeh, I-Cheng; Lee, Tong-Yee

    2017-01-25

    Stylizing a 3D model with characteristic shapes or appearances is common in product design, particularly in the design of 3D model merchandise, such as souvenirs, toys, furniture, and stylized items. A model stylization approach is proposed in this study. The approach combines base and style models while preserving user-specified shape features of the base model and the attractive features of the style model with limited assistance from a user. The two models are first combined at the topological level. A tree-growing technique is utilized to search for all possible combinations of the two models. Second, the models are combined at textural and geometric levels by employing a morphing technique. Results show that the proposed approach generates various appealing models and allows users to control the diversity of the output models and adjust the blending degree between the base and style models. The results of this work are also experimentally compared with those of a recent work through a user study. The comparison indicates that our results are more appealing, feature-preserving, and reasonable than those of the compared previous study. The proposed system allows product designers to easily explore design possibilities and assists novice users in creating their own stylized models.

  7. Body circumferences: clinical implications emerging from a new geometric model

    Directory of Open Access Journals (Sweden)

    Gallagher Dympna

    2008-10-01

    Full Text Available Abstract Background Body volume expands with the positive energy balance associated with the development of adult human obesity and this "growth" is captured by two widely used clinical metrics, waist circumference and body mass index (BMI. Empirical correlations between circumferences, BMI, and related body compartments are frequently reported but fail to provide an important common conceptual foundation that can be related to key clinical observations. A two-phase program was designed to fill this important gap: a geometric model linking body volume with circumferences and BMI was developed and validated in cross-sectional cohorts; and the model was applied to the evaluation of longitudinally monitored subjects during periods of voluntary weight loss. Concepts emerging from the developed model were then used to examine the relations between the evaluated clinical measures and body composition. Methods Two groups of healthy adults (n = 494 and 1499 were included in the cross-sectional model development/testing phase and subjects in two previous weight loss studies were included in the longitudinal model evaluation phase. Five circumferences (arm, waist, hip, thigh, and calf; average of sum, C, height (H, BMI, body volume (V; underwater weighing, and the volumes of major body compartments (whole-body magnetic resonance imaging were measured. Results The evaluation of a humanoid geometric model based a cylinder confirmed that V derived from C and H was highly correlated with measured V [R2 both males and females, 0.97; p 0.5. The scaling of individual circumferences to V/H varied, with waist the highest (V/H~0.6 and calf the lowest (V/H~0.3, indicating that the largest and smallest between-subject "growth" with greater body volume occurs in the abdominal area and lower extremities, respectively. A stepwise linear regression model including all five circumferences2 showed that each contributed independently to V/H. These cross

  8. Hopping electron model with geometrical frustration: kinetic Monte Carlo simulations

    Science.gov (United States)

    Terao, Takamichi

    2016-09-01

    The hopping electron model on the Kagome lattice was investigated by kinetic Monte Carlo simulations, and the non-equilibrium nature of the system was studied. We have numerically confirmed that aging phenomena are present in the autocorrelation function C ({t,tW )} of the electron system on the Kagome lattice, which is a geometrically frustrated lattice without any disorder. The waiting-time distributions p(τ ) of hopping electrons of the system on Kagome lattice has been also studied. It is confirmed that the profile of p (τ ) obtained at lower temperatures obeys the power-law behavior, which is a characteristic feature of continuous time random walk of electrons. These features were also compared with the characteristics of the Coulomb glass model, used as a model of disordered thin films and doped semiconductors. This work represents an advance in the understanding of the dynamics of geometrically frustrated systems and will serve as a basis for further studies of these physical systems.

  9. Mask roughness induced LER: geometric model at long correlation lengths

    Energy Technology Data Exchange (ETDEWEB)

    McClinton, Brittany M.; Naulleau, Patrick P.

    2011-02-11

    Collective understanding of how both the resist and line-edge roughness (LER) on the mask affect the final printed LER has made significant advances. What is poorly understood, however, is the extent to which mask surface roughness couples to image plane LER as a function of illumination conditions, NA, and defocus. Recently, progress has been made in formulating a simplified solution for mask roughness induced LER. Here, we investigate the LER behavior at long correlation lengths of surface roughness on the mask. We find that for correlation lengths greater than 3/NA in wafer dimensions and CDs greater than approximately 0.75/NA, the previously described simplified model, which remains based on physical optics, converges to a 'geometric regime' which is based on ray optics and is independent of partial coherence. In this 'geometric regime', the LER is proportional to the mask slope error as it propagates through focus, and provides a faster alternative to calculating LER in contrast to either full 2D aerial image simulation modeling or the newly proposed physical optics model. Data is presented for both an NA = 0.32 and an NA = 0.5 imaging system for CDs of 22-nm and 50-nm horizontal-line-dense structures.

  10. A geometric model of plaque incision and graft for Peyronie's disease with geometric analyses of different techniques.

    Science.gov (United States)

    Miranda, Alexandre F; Sampaio, Francisco J B

    2014-06-01

    A surgical approach with plaque incision and graft (PIG) to correct Peyronie's disease is the best method for complex, large deviations. However, the geometric and mechanical consequences of this intervention are poorly understood. The aim of this study was to analyze the geometric and mechanical consequences of PIG on penile straighten surgery. A tridimensional penile simile model with a curvature of 85° was created to test all of the most common PIG techniques. PIG with double-Y, H-shape, and Egydio techniques were used to rectify the curved penile model. The results that differed from a rectified cylinder shape were highlighted. All of the analyzed techniques created a geometric distortion that could be linked to poor surgical results. We suggest a new technique to resolve these abnormalities. Current techniques designed to correct penile deviation using PIG present geometric and mechanical imperfections with potential consequences to the postoperative success rate. The new technique proposed in this report could be a possible solution to solve the geometric distortion caused by PIG. © 2014 International Society for Sexual Medicine.

  11. Geometric Model of Topological Insulators from the Maxwell Algebra

    CERN Document Server

    Palumbo, Giandomenico

    2016-01-01

    We propose a novel geometric model of three-dimensional topological insulators in presence of an external electromagnetic field. The gapped boundary of these systems supports relativistic quantum Hall states and is described by a Chern-Simons theory with a gauge connection that takes values in the Maxwell algebra. This represents a non-central extension of the Poincar\\'e algebra and takes into account both the Lorentz and magnetic-translation symmetries of the surface states. In this way, we derive a relativistic version of the Wen-Zee term, and we show that the non-minimal coupling between the background geometry and the electromagnetic field in the model is in agreement with the main properties of the relativistic quantum Hall states in the flat space.

  12. Rule-based spatial modeling with diffusing, geometrically constrained molecules

    Directory of Open Access Journals (Sweden)

    Lohel Maiko

    2010-06-01

    Full Text Available Abstract Background We suggest a new type of modeling approach for the coarse grained, particle-based spatial simulation of combinatorially complex chemical reaction systems. In our approach molecules possess a location in the reactor as well as an orientation and geometry, while the reactions are carried out according to a list of implicitly specified reaction rules. Because the reaction rules can contain patterns for molecules, a combinatorially complex or even infinitely sized reaction network can be defined. For our implementation (based on LAMMPS, we have chosen an already existing formalism (BioNetGen for the implicit specification of the reaction network. This compatibility allows to import existing models easily, i.e., only additional geometry data files have to be provided. Results Our simulations show that the obtained dynamics can be fundamentally different from those simulations that use classical reaction-diffusion approaches like Partial Differential Equations or Gillespie-type spatial stochastic simulation. We show, for example, that the combination of combinatorial complexity and geometric effects leads to the emergence of complex self-assemblies and transportation phenomena happening faster than diffusion (using a model of molecular walkers on microtubules. When the mentioned classical simulation approaches are applied, these aspects of modeled systems cannot be observed without very special treatment. Further more, we show that the geometric information can even change the organizational structure of the reaction system. That is, a set of chemical species that can in principle form a stationary state in a Differential Equation formalism, is potentially unstable when geometry is considered, and vice versa. Conclusions We conclude that our approach provides a new general framework filling a gap in between approaches with no or rigid spatial representation like Partial Differential Equations and specialized coarse-grained spatial

  13. Methods for Geometric Data Validation of 3d City Models

    Science.gov (United States)

    Wagner, D.; Alam, N.; Wewetzer, M.; Pries, M.; Coors, V.

    2015-12-01

    Geometric quality of 3D city models is crucial for data analysis and simulation tasks, which are part of modern applications of the data (e.g. potential heating energy consumption of city quarters, solar potential, etc.). Geometric quality in these contexts is however a different concept as it is for 2D maps. In the latter case, aspects such as positional or temporal accuracy and correctness represent typical quality metrics of the data. They are defined in ISO 19157 and should be mentioned as part of the metadata. 3D data has a far wider range of aspects which influence their quality, plus the idea of quality itself is application dependent. Thus, concepts for definition of quality are needed, including methods to validate these definitions. Quality on this sense means internal validation and detection of inconsistent or wrong geometry according to a predefined set of rules. A useful starting point would be to have correct geometry in accordance with ISO 19107. A valid solid should consist of planar faces which touch their neighbours exclusively in defined corner points and edges. No gaps between them are allowed, and the whole feature must be 2-manifold. In this paper, we present methods to validate common geometric requirements for building geometry. Different checks based on several algorithms have been implemented to validate a set of rules derived from the solid definition mentioned above (e.g. water tightness of the solid or planarity of its polygons), as they were developed for the software tool CityDoctor. The method of each check is specified, with a special focus on the discussion of tolerance values where they are necessary. The checks include polygon level checks to validate the correctness of each polygon, i.e. closeness of the bounding linear ring and planarity. On the solid level, which is only validated if the polygons have passed validation, correct polygon orientation is checked, after self-intersections outside of defined corner points and edges

  14. Geometric Models for Isotropic Random Porous Media: A Review

    Directory of Open Access Journals (Sweden)

    Helmut Hermann

    2014-01-01

    Full Text Available Models for random porous media are considered. The models are isotropic both from the local and the macroscopic point of view; that is, the pores have spherical shape or their surface shows piecewise spherical curvature, and there is no macroscopic gradient of any geometrical feature. Both closed-pore and open-pore systems are discussed. The Poisson grain model, the model of hard spheres packing, and the penetrable sphere model are used; variable size distribution of the pores is included. A parameter is introduced which controls the degree of open-porosity. Besides systems built up by a single solid phase, models for porous media with the internal surface coated by a second phase are treated. Volume fraction, surface area, and correlation functions are given explicitly where applicable; otherwise numerical methods for determination are described. Effective medium theory is applied to calculate physical properties for the models such as isotropic elastic moduli, thermal and electrical conductivity, and static dielectric constant. The methods presented are exemplified by applications: small-angle scattering of systems showing fractal-like behavior in limited ranges of linear dimension, optimization of nanoporous insulating materials, and improvement of properties of open-pore systems by atomic layer deposition of a second phase on the internal surface.

  15. The Effects of Computer-assisted and Distance Learning of Geometric Modeling

    Directory of Open Access Journals (Sweden)

    Omer Faruk Sozcu

    2013-01-01

    Full Text Available The effects of computer-assisted and distance learning of geometric modeling and computer aided geometric design are studied. It was shown that computer algebra systems and dynamic geometric environments can be considered as excellent tools for teaching mathematical concepts of mentioned areas, and distance education technologies would be indispensable for consolidation of successfully passed topics

  16. Geometric and colour data fusion for outdoor 3D models.

    Science.gov (United States)

    Merchán, Pilar; Adán, Antonio; Salamanca, Santiago; Domínguez, Vicente; Chacón, Ricardo

    2012-01-01

    This paper deals with the generation of accurate, dense and coloured 3D models of outdoor scenarios from scanners. This is a challenging research field in which several problems still remain unsolved. In particular, the process of 3D model creation in outdoor scenes may be inefficient if the scene is digitalized under unsuitable technical (specific scanner on-board camera) and environmental (rain, dampness, changing illumination) conditions. We address our research towards the integration of images and range data to produce photorealistic models. Our proposal is based on decoupling the colour integration and geometry reconstruction stages, making them independent and controlled processes. This issue is approached from two different viewpoints. On the one hand, given a complete model (geometry plus texture), we propose a method to modify the original texture provided by the scanner on-board camera with the colour information extracted from external images taken at given moments and under specific environmental conditions. On the other hand, we propose an algorithm to directly assign external images onto the complete geometric model, thus avoiding tedious on-line calibration processes. We present the work conducted on two large Roman archaeological sites dating from the first century A.D., namely, the Theatre of Segobriga and the Fori Porticus of Emerita Augusta, both in Spain. The results obtained demonstrate that our approach could be useful in the digitalization and 3D modelling fields.

  17. Geometric and Colour Data Fusion for Outdoor 3D Models

    Directory of Open Access Journals (Sweden)

    Ricardo Chacón

    2012-05-01

    Full Text Available This paper deals with the generation of accurate, dense and coloured 3D models of outdoor scenarios from scanners. This is a challenging research field in which several problems still remain unsolved. In particular, the process of 3D model creation in outdoor scenes may be inefficient if the scene is digitalized under unsuitable technical (specific scanner on-board camera and environmental (rain, dampness, changing illumination conditions. We address our research towards the integration of images and range data to produce photorealistic models. Our proposal is based on decoupling the colour integration and geometry reconstruction stages, making them independent and controlled processes. This issue is approached from two different viewpoints. On the one hand, given a complete model (geometry plus texture, we propose a method to modify the original texture provided by the scanner on-board camera with the colour information extracted from external images taken at given moments and under specific environmental conditions. On the other hand, we propose an algorithm to directly assign external images onto the complete geometric model, thus avoiding tedious on-line calibration processes. We present the work conducted on two large Roman archaeological sites dating from the first century A.D., namely, the Theatre of Segobriga and the Fori Porticus of Emerita Augusta, both in Spain. The results obtained demonstrate that our approach could be useful in the digitalization and 3D modelling fields.

  18. Geometrical Models of the Locally Anisotropic Space-Time

    CERN Document Server

    Balan, V; Kokarev, S S; Pavlov, D G; Siparov, S V; Voicu, N

    2011-01-01

    Along with the construction of non-Lorentz-invariant effective field theories, recent studies which are based on geometric models of Finsler space-time become more and more popular. In this respect, the Finslerian approach to the problem of Lorentz symmetry violation is characterized by the fact that the violation of Lorentz symmetry is not accompanied by a violation of relativistic symmetry. That means, in particular, that preservation of relativistic symmetry can be considered as a rigorous criterion of the viability for any non-Lorentz-invariant effective field theory. Although this paper has a review character, it contains (with few exceptions) only those results on Finsler extensions of relativity theory, that were obtained by the authors.

  19. Geometrical properties of the Potts model during the coarsening regime.

    Science.gov (United States)

    Loureiro, Marcos P O; Arenzon, Jeferson J; Cugliandolo, Leticia F

    2012-02-01

    We study the dynamic evolution of geometric structures in a polydegenerate system represented by a q-state Potts model with nonconserved order parameter that is quenched from its disordered into its ordered phase. The numerical results obtained with Monte Carlo simulations show a strong relation between the statistical properties of hull perimeters in the initial state and during coarsening: The statistics and morphology of the structures that are larger than the averaged ones are those of the initial state, while the ones of small structures are determined by the curvature-driven dynamic process. We link the hull properties to the ones of the areas they enclose. We analyze the linear von Neumann-Mullins law, both for individual domains and on the average, concluding that its validity, for the later case, is limited to domains with number of sides around 6, while presenting stronger violations in the former case. © 2012 American Physical Society

  20. Rapid world modeling: Fitting range data to geometric primitives

    Energy Technology Data Exchange (ETDEWEB)

    Feddema, J.; Little, C.

    1996-12-31

    For the past seven years, Sandia National Laboratories has been active in the development of robotic systems to help remediate DOE`s waste sites and decommissioned facilities. Some of these facilities have high levels of radioactivity which prevent manual clean-up. Tele-operated and autonomous robotic systems have been envisioned as the only suitable means of removing the radioactive elements. World modeling is defined as the process of creating a numerical geometric model of a real world environment or workspace. This model is often used in robotics to plan robot motions which perform a task while avoiding obstacles. In many applications where the world model does not exist ahead of time, structured lighting, laser range finders, and even acoustical sensors have been used to create three dimensional maps of the environment. These maps consist of thousands of range points which are difficult to handle and interpret. This paper presents a least squares technique for fitting range data to planar and quadric surfaces, including cylinders and ellipsoids. Once fit to these primitive surfaces, the amount of data associated with a surface is greatly reduced up to three orders of magnitude, thus allowing for more rapid handling and analysis of world data.

  1. Generalised geometrical CP violation in a T′ lepton flavour model

    Energy Technology Data Exchange (ETDEWEB)

    Girardi, Ivan [SISSA/INFN,Via Bonomea 265, I-34136 Trieste (Italy); Meroni, Aurora [SISSA/INFN,Via Bonomea 265, I-34136 Trieste (Italy); Dipartimento di Matematica e Fisica, Università di Roma Tre,Via della Vasca Navale 84, I-00146, Rome (Italy); INFN, Laboratori Nazionali di Frascati,Via E. Fermi 40, I-00044 Frascati (Italy); Petcov, S.T. [SISSA/INFN,Via Bonomea 265, I-34136 Trieste (Italy); IPMU, University of Tokyo,5-1-5 Kashiwanoha, 277-8583 Kashiwa (Japan); Spinrath, Martin [SISSA/INFN,Via Bonomea 265, I-34136 Trieste (Italy); Institut für Theoretische Teilchenphysik, Karlsruhe Institute of Technology,Engesserstraße 7, D-76131 Karlsruhe (Germany)

    2014-02-12

    We analyse the interplay of generalised CP transformations and the non-Abelian discrete group T′ and use the semi-direct product G{sub f}=T′⋊H{sub CP}, as family symmetry acting in the lepton sector. The family symmetry is shown to be spontaneously broken in a geometrical manner. In the resulting flavour model, naturally small Majorana neutrino masses for the light active neutrinos are obtained through the type I see-saw mechanism. The known masses of the charged leptons, lepton mixing angles and the two neutrino mass squared differences are reproduced by the model with a good accuracy. The model allows for two neutrino mass spectra with normal ordering (NO) and one with inverted ordering (IO). For each of the three spectra the absolute scale of neutrino masses is predicted with relatively small uncertainty. The value of the Dirac CP violation (CPV) phase δ in the lepton mixing matrix is predicted to be δ≅π/2 or 3π/2. Thus, the CP violating effects in neutrino oscillations are predicted to be maximal (given the values of the neutrino mixing angles) and experimentally observable. We present also predictions for the sum of the neutrino masses, for the Majorana CPV phases and for the effective Majorana mass in neutrinoless double beta decay. The predictions of the model can be tested in a variety of ongoing and future planned neutrino experiments.

  2. A geometric growth model interpolating between regular and small-world networks

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhongzhi [Department of Computer Science and Engineering, Fudan University, Shanghai 200433 (China); Zhou, Shuigeng [Department of Computer Science and Engineering, Fudan University, Shanghai 200433 (China); Wang, Zhiyong [Department of Computer Science and Engineering, Fudan University, Shanghai 200433 (China); Shen, Zhen [Department of Computer Science and Engineering, Fudan University, Shanghai 200433 (China)

    2007-09-28

    We propose a geometric growth model which interpolates between one-dimensional linear graphs and small-world networks. The model undergoes a transition from large to small worlds. We study the topological characteristics by both theoretical predictions and numerical simulations, which are in good accordance with each other. Our geometrically growing model is a complementarity for the static WS model.

  3. Nuclear astrophysics at DRAGON

    Energy Technology Data Exchange (ETDEWEB)

    Hager, U. [Colorado School of Mines, Golden, Colorado (United States)

    2014-05-02

    The DRAGON recoil separator is located at the ISAC facility at TRIUMF, Vancouver. It is designed to measure radiative alpha and proton capture reactions of astrophysical importance. Over the last years, the DRAGON collaboration has measured several reactions using both radioactive and high-intensity stable beams. For example, the 160(a, g) cross section was recently measured. The reaction plays a role in steady-state helium burning in massive stars, where it follows the 12C(a, g) reaction. At astrophysically relevant energies, the reaction proceeds exclusively via direct capture, resulting in a low rate. In this measurement, the unique capabilities of DRAGON enabled determination not only of the total reaction rates, but also of decay branching ratios. In addition, results from other recent measurements will be presented.

  4. Experimental Overtopping Investigation for the Wave Dragon

    DEFF Research Database (Denmark)

    Borgarino, Bruno; Kofoed, Jens Peter; Tedd, James

    The present report displays the results from overtopping tests carried on the 1:51.8 Wave Dragon model in September 2007. This tests have been carried on by Bruno Borgarino, James Tedd and Jens Peter Kofoed in the wave tank facilities of Aalborg University. The objective was to provide an updated...

  5. Free-form geometric modeling by integrating parametric and implicit PDEs.

    Science.gov (United States)

    Du, Haixia; Qin, Hong

    2007-01-01

    Parametric PDE techniques, which use partial differential equations (PDEs) defined over a 2D or 3D parametric domain to model graphical objects and processes, can unify geometric attributes and functional constraints of the models. PDEs can also model implicit shapes defined by level sets of scalar intensity fields. In this paper, we present an approach that integrates parametric and implicit trivariate PDEs to define geometric solid models containing both geometric information and intensity distribution subject to flexible boundary conditions. The integrated formulation of second-order or fourth-order elliptic PDEs permits designers to manipulate PDE objects of complex geometry and/or arbitrary topology through direct sculpting and free-form modeling. We developed a PDE-based geometric modeling system for shape design and manipulation of PDE objects. The integration of implicit PDEs with parametric geometry offers more general and arbitrary shape blending and free-form modeling for objects with intensity attributes than pure geometric models.

  6. Content-Based Search on a Database of Geometric Models: Identifying Objects of Similar Shape

    Energy Technology Data Exchange (ETDEWEB)

    XAVIER, PATRICK G.; HENRY, TYSON R.; LAFARGE, ROBERT A.; MEIRANS, LILITA; RAY, LAWRENCE P.

    2001-11-01

    The Geometric Search Engine is a software system for storing and searching a database of geometric models. The database maybe searched for modeled objects similar in shape to a target model supplied by the user. The database models are generally from CAD models while the target model may be either a CAD model or a model generated from range data collected from a physical object. This document describes key generation, database layout, and search of the database.

  7. Water flow based geometric active deformable model for road network

    Science.gov (United States)

    Leninisha, Shanmugam; Vani, Kaliaperumal

    2015-04-01

    A width and color based geometric active deformable model is proposed for road network extraction from remote sensing images with minimal human interception. Orientation and width of road are computed from a single manual seed point, from which the propagation starts both right and left hand directions of the starting point, which extracts the interconnected road network from the aerial or high spatial resolution satellite image automatically. Here the propagation (like water flow in canal with defined boundary) is restricted with color and width of the road. Road extraction is done for linear, curvilinear (U shape and S shape) roads first, irrespective of width and color. Then, this algorithm is improved to extract road with junctions in a shape of L, T and X along with center line. Roads with small break or disconnected roads are also extracts by a modified version of this same algorithm. This methodology is tested and evaluated with various remote sensing images. The experimental results show that the proposed method is efficient and extracting roads accurately with less computation time. However, in complex urban areas, the identification accuracy declines due to the various sizes of obstacles, over bridges, multilane etc.

  8. GEOMETRIC MODEL OF THE NAZCA PLATE SUBDUCTION IN SOUTHWEST COLOMBIA

    Directory of Open Access Journals (Sweden)

    Monsalve J Hugo

    2007-12-01

    Full Text Available A geometric model for the subduction of the Nazca plate beneath the South American plate in southwestern of Colombia is proposed based on the relocation of hypocenters of local and distant
    earthquakes. By means of the simultaneous inversion of teleseismic P and SH body waves, the depths of the 15 events with Mw ≥ 5.8 were constrained, and the hypocenters of the 250 earthquakes recorded
    between 1990 and 2005 by the International Seismological Centre (ISC and U.S. Geological Survey, National Earthquake Information Center (NEIC were constrained and relocated. A model is proposed
    for the hypocentral sections taking into account the trench along of the Earth and Colombia-Ecuador.
    Three different possible shapes of subduction of the Nazca plate in the Colombia-Ecuador trench were obtained: The first configuration, in the Cali A segment, the dip angle changes from17º to 45º down to a maximum depth of 100km; the second configuration, in the Popayán B and Nariño C segments, the dip angle holds approximately constant at 30º down to a maximum depth of 200 km; and the third configuration, in the Quito D segment, the dip angle changes of 9º to 50º to a maximum depth 220 km. The maximum depth of seismicity along the Colombia-Ecuador trench shows two increases, the first between latitudes 4.5ºN-5ºN and the second between the latitudes 1ºS-2ºS, which suggest that the presence of the Malpelo and Carnegie Ridges may generate a differential blockage at the Pacific Colombia-Ecuador basin.

  9. Wave Dragon Wave Energy Converters Used as Coastal Protection

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Kofoed, Jens Peter

    2011-01-01

    This paper deals with wave energy converters used to reduce the wave height along shorelines. For this study the Wave Dragon wave energy converter is chosen. The wave height reduction from a single device has been evaluated from physical model tests in scale 1:51.8 of the 260 x 150 m, 24 kW/m model...... Spain, to evaluate the potential for reducing wave heights close the shore by means of Wave Dragons....

  10. Evaluation of Hydraulic Response of the Wave Dragon

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter

    The present study investigates the hydraulic response of the wave energy converter Wave Dragon. This is done by peforming model tests in a wave tank in the Hydraulics & Coastal Engineering Laboratory at Aalborg University. In the model tests a floating scale model (length scale 1:50) of the Wave...... Dragon is subjected to irregular, long crested irregular and short crested sea conditions corresponding to typical situations under which the Wave Dragon will produce power. Furthermore two situations corresponding to extreme storm conditions are tested. The objective of the study is to determine...... the wave induced forces in the moorings and in the junction between the reflectors and the reservoir part, and motions of the Wave Dragon situated in different sea conditions....

  11. Evaluation of Hydraulic Response of the Wave Dragon

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter

    The present study investigates the hydraulic response of the wave energy converter Wave Dragon. This is done by peforming model tests in a wave tank in the Hydraulics & Coastal Engineering Laboratory at Aalborg University. In the model tests a floating scale model (length scale 1:50) of the Wave...... Dragon is subjected to irregular, long crested irregular and short crested sea conditions corresponding to typical situations under which the Wave Dragon will produce power. Furthermore two situations corresponding to extreme storm conditions are tested. The objective of the study is to determine...... the wave induced forces in the moorings and in the junction between the reflectors and the reservoir part, and motions of the Wave Dragon situated in different sea conditions....

  12. The racing dragon

    CERN Document Server

    2009-01-01

    Dating back nearly 2000 years, the ancient Chinese tradition of Dragon Boat Racing was originally a celebration that fell on the 5th day of the 5th lunar month as a gesture to please the Gods and bring forth necessary rains to cultivate the lands. Now the CERN Canoe and Kayak Club, too, participates in this tradition, though not so much to please the Gods on the ritualistic date, but to bring forth giant smiles on the faces of members. Dragon Boat Racing has been rising steadily in popularity in Europe since the mid nineties and with the great potential to host and promote Dragon Boat Racing in the Geneva area, the CERN Canoe and Kayak Club, has taken the initiative to bring the sport to the region. Some members of the Club traveled to Dole in June to participate in the Festival Dragon Boat 2009. Under perfect sunny conditions, the team triumphed in their first ever tournament, cruising to a convincing first place overall finish. T...

  13. Dragon Boat Festival.

    Science.gov (United States)

    Lew, Gordon

    This is one of a series of elementary readers written in Cantonese and English and designed to familiarize children with the traditional major Chinese festivals celebrated by the Chinese in America. This booklet describes the celebration of the Dragon Boat Festival, which marks the beginning of summer. A brief background to the festival is…

  14. Estimation of PM10 concentrations over Seoul using multiple empirical models with AERONET and MODIS data collected during the DRAGON-Asia campaign

    Science.gov (United States)

    Seo, S.; Kim, J.; Lee, H.; Jeong, U.; Kim, W.; Holben, B. N.; Kim, S.-W.; Song, C. H.; Lim, J. H.

    2015-01-01

    The performance of various empirical linear models to estimate the concentrations of surface-level particulate matter with a diameter less than 10 μm (PM10) was evaluated using Aerosol Robotic Network (AERONET) sun photometer and Moderate-Resolution Imaging Spectroradiometer (MODIS) data collected in Seoul during the Distributed Regional Aerosol Gridded Observation Network (DRAGON)-Asia campaign from March to May 2012. An observed relationship between the PM10 concentration and the aerosol optical depth (AOD) was accounted for by several parameters in the empirical models, including boundary layer height (BLH), relative humidity (RH), and effective radius of the aerosol size distribution (Reff), which was used here for the first time in empirical modeling. Among various empirical models, the model which incorporates both BLH and Reff showed the highest correlation, which indicates the strong influence of BLH and Reff on the PM10 estimations. Meanwhile, the effect of RH on the relationship between AOD and PM10 appeared to be negligible during the campaign period (spring), when RH is generally low in northeast Asia. A large spatial dependency of the empirical model performance was found by categorizing the locations of the collected data into three different site types, which varied in terms of the distances between instruments and source locations. When both AERONET and MODIS data sets were used in the PM10 estimation, the highest correlations between measured and estimated values (R = 0.76 and 0.76 using AERONET and MODIS data, respectively) were found for the residential area (RA) site type, while the poorest correlations (R = 0.61 and 0.68 using AERONET and MODIS data, respectively) were found for the near-source (NS) site type. Significant seasonal variations of empirical model performances for PM10 estimation were found using the data collected at Yonsei University (one of the DRAGON campaign sites) over a period of 17 months including the DRAGON campaign

  15. Emergent lattices with geometrical frustration in doped extended Hubbard models

    Science.gov (United States)

    Kaneko, Ryui; Tocchio, Luca F.; Valentí, Roser; Gros, Claudius

    2016-11-01

    Spontaneous charge ordering occurring in correlated systems may be considered as a possible route to generate effective lattice structures with unconventional couplings. For this purpose we investigate the phase diagram of doped extended Hubbard models on two lattices: (i) the honeycomb lattice with on-site U and nearest-neighbor V Coulomb interactions at 3 /4 filling (n =3 /2 ) and (ii) the triangular lattice with on-site U , nearest-neighbor V , and next-nearest-neighbor V' Coulomb interactions at 3 /8 filling (n =3 /4 ). We consider various approaches including mean-field approximations, perturbation theory, and variational Monte Carlo. For the honeycomb case (i), charge order induces an effective triangular lattice at large values of U /t and V /t , where t is the nearest-neighbor hopping integral. The nearest-neighbor spin exchange interactions on this effective triangular lattice are antiferromagnetic in most of the phase diagram, while they become ferromagnetic when U is much larger than V . At U /t ˜(V/t ) 3 , ferromagnetic and antiferromagnetic exchange interactions nearly cancel out, leading to a system with four-spin ring-exchange interactions. On the other hand, for the triangular case (ii) at large U and finite V', we find no charge order for small V , an effective kagome lattice for intermediate V , and one-dimensional charge order for large V . These results indicate that Coulomb interactions induce [case (i)] or enhance [case(ii)] emergent geometrical frustration of the spin degrees of freedom in the system, by forming charge order.

  16. Geometric modeling and analysis of large latticed surfaces

    Science.gov (United States)

    Nayfeh, A. H.; Hefzy, M. S.

    1980-01-01

    The application of geometrical schemes, similar to geodesic domes, to large spherical antenna reflectors was investigated. The shape and size of flat segmented latticed surfaces which approximate general shells of revolution, and in particular spherical and paraboloidal reflective surfaces, were determined. The extensive mathematical and computational geometric analyses of the reflector resulted in the development of a general purpose computer program capable of generating the complete design parameters of the dish. The program also includes a graphical self contained subroutine for graphic display of the required design.

  17. A Geometrical Model for Non-Zero $\\theta_{13}$

    CERN Document Server

    Chen, Jun-Mou; Li, Xue-Qian

    2011-01-01

    Based on Friedberg and Lee's geometric picture by which the tribimaximal PMNS leptonic mixing matrix is constructed, namely corresponding mixing angles correspond to the geometric angles among the sides of a cube. We suggest that the three realistic mixing angles which slightly deviate from the values determined for the cube, are due to a viable deformation from the perfectly cubic shape. Taking the best fitted results of $\\theta_{12}$ and $\\theta_{23}$ as inputs, we determine the central value of $\\sin^22\\theta_{13}$ should be 0.0238 with a relatively large error tolerance, this value lies in the range of measurement precision of the Daya Bay experiment.

  18. Information Geometric Complexity of a Trivariate Gaussian Statistical Model

    Directory of Open Access Journals (Sweden)

    Domenico Felice

    2014-05-01

    Full Text Available We evaluate the information geometric complexity of entropic motion on low-dimensional Gaussian statistical manifolds in order to quantify how difficult it is to make macroscopic predictions about systems in the presence of limited information. Specifically, we observe that the complexity of such entropic inferences not only depends on the amount of available pieces of information but also on the manner in which such pieces are correlated. Finally, we uncover that, for certain correlational structures, the impossibility of reaching the most favorable configuration from an entropic inference viewpoint seems to lead to an information geometric analog of the well-known frustration effect that occurs in statistical physics.

  19. Geometric Modeling Applications Interface Program (GMAP). Volume 1. Executive Overview

    Science.gov (United States)

    1989-09-01

    Z . Code) 10. SOURCE OF FUNDING NOS. PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO. NO. NO. 11. TITLE (Include Security Classification) GEOMETRIC...342f CI FTR560240OOlU September 1989 SECTION 2 SCOPE OF GMAP GMAP focused on the generacion , control, and exchange of computer information to replace

  20. A differential-geometric approach to generalized linear models with grouped predictors

    NARCIS (Netherlands)

    Augugliaro, Luigi; Mineo, Angelo M.; Wit, Ernst C.

    2016-01-01

    We propose an extension of the differential-geometric least angle regression method to perform sparse group inference in a generalized linear model. An efficient algorithm is proposed to compute the solution curve. The proposed group differential-geometric least angle regression method has important

  1. Dragon-Kings, Black Swans and the Prediction of Crises

    CERN Document Server

    Sornette, Didier

    2009-01-01

    We develop the concept of ``dragon-kings'' corresponding to meaningful outliers, which are found to coexist with power laws in the distributions of event sizes under a broad range of conditions in a large variety of systems. These dragon-kings reveal the existence of mechanisms of self-organization that are not apparent otherwise from the distribution of their smaller siblings. We present a generic phase diagram to explain the generation of dragon-kings and document their presence in six different examples (distribution of city sizes, distribution of acoustic emissions associated with material failure, distribution of velocity increments in hydrodynamic turbulence, distribution of financial drawdowns, distribution of the energies of epileptic seizures in humans and in model animals, distribution of the earthquake energies). We emphasize the importance of understanding dragon-kings as being often associated with a neighborhood of what can be called equivalently a phase transition, a bifurcation, a catastrophe ...

  2. Geometrical model for non-zero θ13

    Science.gov (United States)

    Chen, Jun-Mou; Wang, Bin; Li, Xue-Qian

    2011-10-01

    Based on Friedberg and Lee’s geometric picture by which the tribimaximal Pontecorvo-Maki-Nakawaga-Sakata leptonic mixing matrix is constructed, namely, corresponding mixing angles correspond to the geometric angles among the sides of a cube. We suggest that the three realistic mixing angles, which slightly deviate from the values determined for the cube, are due to a viable deformation from the perfectly cubic shape. Taking the best-fitted results of θ12 and θ23 as inputs, we determine the central value of sin⁡22θ13 should be 0.0238, with a relatively large error tolerance; this value lies in the range of measurement precision of the Daya Bay experiment and is consistent with recent results from the T2K Collaboration.

  3. Modeling Steady Acoustic Fields Bounded in Cavities with Geometrical Imperfections

    Science.gov (United States)

    Albo, P. A. Giuliano; Gavioso, R. M.; Benedetto, G.

    2010-07-01

    A mathematical method is derived within the framework of classical Lagrangian field theory, which is suitable for the determination of the eigenstates of acoustic resonators of nearly spherical shape. The method is based on the expansion of the Helmholtz differential operator and the boundary condition in a power series of a small geometrical perturbation parameter {ɛ} . The method extends to orders higher than {ɛ^2} the calculation of the perturbed acoustic eigenvalues, which was previously limited by the use of variational formalism and the methods of Morse and Ingard. A specific example is worked out for radial modes of a prolate spheroid, with the frequency perturbation calculated to order {ɛ^3} . A possible strategy to tackle the problem of calculating the acoustic eigenvalues for cavities presenting non-smooth geometrical imperfections is also described.

  4. Dragon Daughter Tree

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    LONG long ago, Heavenly King Mu who ruled the Lijiang River intended to extend his kingdom. In order to occupy Yongning, a fertile land, he wrote to the king of the North (the North was inhabited by the Primmi and Naxi nationalities in Yongning) to propose a marriage between the two families. On the 50th birthday of Heavenly King Mu, his daughter, Princess Longnu (Dragon Daughter), fell in love with the Prince of the North, a kind and handsome young man. The Prince of the North and the Dragon Daughter were deeply attached to each other after their marriage. Before long the King of the North died and the prince became the new King. Heavenly King Mu wanted to

  5. A DXA validated geometric model for the calculation of body segment inertial parameters of young females.

    Science.gov (United States)

    Winter, Samantha Lee; Forrest, Sarah Michelle; Wallace, Joanne; Challis, John H

    2017-08-08

    The purpose of this study was to validate a new geometric solids model, developed to address the lack of female specific models for body segment inertial parameter estimation. A second aim was to determine the effect of reducing the number of geometric solids used to model the limb segments on model accuracy. The 'full' model comprised 56 geometric solids, the 'reduced' 31, and the 'basic' 16. Predicted whole-body inertial parameters were compared with direct measurements (reaction board, scales), and predicted segmental parameters with those estimated from whole-body DXA scans for 28 females. The percentage root mean square error (%RMSE) for whole-body volume was geometric solids are required to more accurately model the trunk.

  6. Survivability mode and extreme loads on the mooring lines of the Wave Dragon Wave Energy Converter

    Energy Technology Data Exchange (ETDEWEB)

    Parmeggiani, S.; Kofoed, J.P.

    2010-11-15

    This report is a product of the cooperation agreement between Wave Dragon and Aalborg University regarding phase 2 of the development of the Wave Dragon Wave Energy Converter. The research is carried out by testing the 1:51.8 scale model of the Wave Dragon, aiming at the assessment of the survivability of the device in extreme waves and evaluation of the design loads for the mooring component. The outcome of the research will be used as input for future research work aimed at the design of the mooring system and the certification of the structural design for the full scale Wave Dragon demonstrator. (Author)

  7. A Geometric Model of Multiaxial Warp-knitted Preform for Composite Reinforcement

    Institute of Scientific and Technical Information of China (English)

    周荣星; 李炜; 陈南梁; 冯勋伟

    2003-01-01

    A new geometric model of Multiaxial Warp-Knitted (MWK) performs, which is based on the experimental observations and analysis of basic stitch, is developed to relate the geometric parameters and process variables. The fiber volume fraction and fibre orientation of MWK reinforced composites are described in terms of structural and processing parameters in the model. And this model provides a basis for the prediction of mechanical behavior of the MWK reinforced composites.

  8. Evaluation of Rational Function Model for Geometric Modeling of CHANG'E-1 CCD Images

    Science.gov (United States)

    Liu, Y.; Di, K.

    2011-08-01

    Rational Function Model (RFM) is a generic geometric model that has been widely used in geometric processing of high-resolution earth-observation satellite images, due to its generality and excellent capability of fitting complex rigorous sensor models. In this paper, the feasibility and precision of RFM for geometric modeling of China's Chang'E-1 (CE-1) lunar orbiter images is presented. The RFM parameters of forward-, nadir- and backward-looking CE-1 images are generated though least squares solution using virtual control points derived from the rigorous sensor model. The precision of the RFM is evaluated by comparing with the rigorous sensor model in both image space and object space. Experimental results using nine images from three orbits show that RFM can precisely fit the rigorous sensor model of CE-1 CCD images with a RMS residual error of 1/100 pixel level in image space and less than 5 meters in object space. This indicates that it is feasible to use RFM to describe the imaging geometry of CE-1 CCD images and spacecraft position and orientation. RFM will enable planetary data centers to have an option to supply RFM parameters of orbital images while keeping the original orbit trajectory data confidential.

  9. An Optimized Method for PDEs-Based Geometric Modeling and Reconstruction

    Directory of Open Access Journals (Sweden)

    Chuanjun Wang

    2012-09-01

    Full Text Available This study presents an optimized method for efficient geometric modeling and reconstruction using Partial Differential Equations (PDEs. Based on the identification between the analytic solution of Bloor Wilson PDE and the Fourier series, we transform the problem of model selection for PDEs-based geometric modeling into the problem of significant frequencies selection from Fourier series. With the significance analysis of the Fourier series, a model selection and an iterative surface fitting algorithm are applied to address the problem of overfitting and underfitting in the PDEs-based geometric modeling and reconstruction. Simulations are conducted on both the computer generated geometric surface and the laser scanned 3D face data. Experiment results show the merits of the proposed method.

  10. Wave Dragon Buoyancy Regulation Study

    DEFF Research Database (Denmark)

    Jakobsen, Jens; Kofoed, Jens Peter

    Wave Dragon is a wave energy converter, which was deployed offshore at Nissum Bredning in Denmark in 2003. The experience gained from operating Wave Dragon during 2003 and 2004 has shown that the buoyancy regulation system can be improved in a number of ways. This study describes the current...

  11. Modeling thermodynamic distance, curvature and fluctuations a geometric approach

    CERN Document Server

    Badescu, Viorel

    2016-01-01

    This textbook aims to briefly outline the main directions in which the geometrization of thermodynamics has been developed in the last decades. The textbook is accessible to people trained in thermal sciences but not necessarily with solid formation in mathematics. For this, in the first chapters a summary of the main mathematical concepts is made. In some sense, this makes the textbook self-consistent. The rest of the textbook consists of a collection of results previously obtained in this young branch of thermodynamics. The manner of presentation used throughout the textbook is adapted for ease of access of readers with education in natural and technical sciences.

  12. A geometric level set model for ultrasounds analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sarti, A.; Malladi, R.

    1999-10-01

    We propose a partial differential equation (PDE) for filtering and segmentation of echocardiographic images based on a geometric-driven scheme. The method allows edge-preserving image smoothing and a semi-automatic segmentation of the heart chambers, that regularizes the shapes and improves edge fidelity especially in presence of distinct gaps in the edge map as is common in ultrasound imagery. A numerical scheme for solving the proposed PDE is borrowed from level set methods. Results on human in vivo acquired 2D, 2D+time,3D, 3D+time echocardiographic images are shown.

  13. Modeling And Analysis Of The Surface Roughness And Geometrical Error Using Taguchi And Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    DR.S.C.JAYSWAL

    2011-07-01

    Full Text Available This experimental work presents a technique to determine the better surface quality by controlling the surface roughness and geometrical error. In machining operations, achieving desired surface quality features of the machined product is really a challenging job. Because, these quality features are highly correlated and areexpected to be influenced directly or indirectly by the direct effect of process parameters or their interactive effects. Thus The four input process parameters such as spindle speed, depth of cut, feed rate, and stepover have been selected to minimize the surface roughness and geometrical error simultaneously by using the robustdesign concept of Taguchi L9(34 method coupled with Response surface concept. Mathematical models for surface roughness and geometrical error were obtained from response surface analysis to predict values of surface roughness and geometrical error. S/N ratio and ANOVA analyses were also performed to obtain for significant parameters influencing surface roughness and geometrical error.

  14. An improved measurement model of binocular vision using geometrical approximation

    Science.gov (United States)

    Wang, Qiyue; Wang, Zhongyu; Yao, Zhenjian; Forrest, Jeffrey; Zhou, Weihu

    2016-12-01

    In order to improve the precision of a binocular vision measurement system, an effective binocular vision measurement method, named geometrical approximation, is proposed. This method can optimize the measurement results by geometrical approximation operation based on the principles of optimization theory and spatial geometry. To evaluate the properties of the proposed method, both simulative and practical experiments are carried out. The influence of image noise and focal length error on measurement results is discussed. The results show that measurement performance of the proposed method is manifested well. Besides, the proposed method is also compared with Bundle adjustment and least squares method in a practical experiment. The experiment results indicate that the average error, calculated by using the proposed method, is 0.076 mm less than Bundle adjustment’s 0.085 mm, and only half of the least squares method’s 0.146 mm. At the meantime, the proposed method enjoys a high level of computational efficiency when compared to Bundle adjustment. Since no nonlinear iteration optimization is involved, this method can be applied readily to real time on-line measurements.

  15. Transient Analysis of Hysteresis Queueing Model Using Matrix Geometric Method

    Directory of Open Access Journals (Sweden)

    Wajiha Shah

    2011-10-01

    Full Text Available Various analytical methods have been proposed for the transient analysis of a queueing system in the scalar domain. In this paper, a vector domain based transient analysis is proposed for the hysteresis queueing system with internal thresholds for the efficient and numerically stable analysis. In this system arrival rate of customer is controlled through the internal thresholds and the system is analyzed as a quasi-birth and death process through matrix geometric method with the combination of vector form Runge-Kutta numerical procedure which utilizes the special matrices. An arrival and service process of the system follows a Markovian distribution. We analyze the mean number of customers in the system when the system is in transient state against varying time for a Markovian distribution. The results show that the effect of oscillation/hysteresis depends on the difference between the two internal threshold values.

  16. On hydrological model complexity, its geometrical interpretations and prediction uncertainty

    NARCIS (Netherlands)

    Arkesteijn, E.C.M.M.; Pande, S.

    2013-01-01

    Knowledge of hydrological model complexity can aid selection of an optimal prediction model out of a set of available models. Optimal model selection is formalized as selection of the least complex model out of a subset of models that have lower empirical risk. This may be considered equivalent to

  17. CFD study of the overtopping discharge of the Wave Dragon wave energy converter

    DEFF Research Database (Denmark)

    Eskilsson, K.; Palm, J.; Kofoed, Jens Peter

    2015-01-01

    The Wave Dragon is a floating Wave Energy Converter (WEC) working by the overtopping principle. The overtopping discharge has been determined by model scale experiments in wave basins. In the present study we numerically simulate the overtopping behavior of the Wave Dragon device using a VOFbased...

  18. Geometrical Modeling of Woven Fabrics Weavability-Limit New Relationships

    Directory of Open Access Journals (Sweden)

    Dalal Mohamed

    2017-03-01

    Full Text Available The weavability limit and tightness for 2D and 3D woven fabrics is an important factor and depends on many geometric parameters. Based on a comprehensive review of the literature on textile fabric construction and property, and related research on fabric geometry, a study of the weavability limit and tightness relationships of 2D and 3D woven fabrics was undertaken. Experiments were conducted on a representative number of polyester and cotton woven fabrics which have been woven in our workshop, using three machines endowed with different insertion systems (rapier, projectiles and air jet. Afterwards, these woven fabrics have been analyzed in the laboratory to determine their physical and mechanical characteristics using air permeability-meter and KES-F KAWABATA Evaluation System for Fabrics. In this study, the current Booten’s weavability limit and tightness relationships based on Ashenhurst’s, Peirce’s, Love’s, Russell’s, Galuszynskl’s theory and maximum-weavability is reviewed and modified as new relationships to expand their use to general cases (2D and 3D woven fabrics, all fiber materiel, all yarns etc…. The theoretical relationships were examined and found to agree with experimental results. It was concluded that the weavability limit and tightness relationships are useful tools for weavers in predicting whether a proposed fabric construction was weavable and also in predicting and explaining their physical and mechanical properties.

  19. Mask synthesis and verification based on geometric model for surface micro-machined MEMS

    Institute of Scientific and Technical Information of China (English)

    LI Jian-hua; LIU Yu-sheng; GAO Shu-ming

    2005-01-01

    Traditional MEMS (microelectromechanical system) design methodology is not a structured method and has become an obstacle for MEMS creative design. In this paper, a novel method of mask synthesis and verification for surface micro-machined MEMS is proposed, which is based on the geometric model of a MEMS device. The emphasis is focused on synthesizing the masks at the basis of the layer model generated from the geometric model of the MEMS device. The method is comprised of several steps: the correction of the layer model, the generation of initial masks and final masks including multi-layer etch masks, and mask simulation. Finally some test results are given.

  20. The effects of geometric uncertainties on computational modelling of knee biomechanics.

    Science.gov (United States)

    Meng, Qingen; Fisher, John; Wilcox, Ruth

    2017-08-01

    The geometry of the articular components of the knee is an important factor in predicting joint mechanics in computational models. There are a number of uncertainties in the definition of the geometry of cartilage and meniscus, and evaluating the effects of these uncertainties is fundamental to understanding the level of reliability of the models. In this study, the sensitivity of knee mechanics to geometric uncertainties was investigated by comparing polynomial-based and image-based knee models and varying the size of meniscus. The results suggested that the geometric uncertainties in cartilage and meniscus resulting from the resolution of MRI and the accuracy of segmentation caused considerable effects on the predicted knee mechanics. Moreover, even if the mathematical geometric descriptors can be very close to the imaged-based articular surfaces, the detailed contact pressure distribution produced by the mathematical geometric descriptors was not the same as that of the image-based model. However, the trends predicted by the models based on mathematical geometric descriptors were similar to those of the imaged-based models.

  1. Impact of Wave Dragon on Wave Climate

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Tedd, James; Kramer, Morten

    This report is an advisory paper for use in determining the wave dragon effects on hydrography, by considering the effect on the wave climate in the region of a wave dragon. This is to be used in the impact assessment for the Wave Dragon pre-commercial demonstrator.......This report is an advisory paper for use in determining the wave dragon effects on hydrography, by considering the effect on the wave climate in the region of a wave dragon. This is to be used in the impact assessment for the Wave Dragon pre-commercial demonstrator....

  2. Multi-Mode GF-3 Satellite Image Geometric Accuracy Verification Using the RPC Model.

    Science.gov (United States)

    Wang, Taoyang; Zhang, Guo; Yu, Lei; Zhao, Ruishan; Deng, Mingjun; Xu, Kai

    2017-09-01

    The GaoFen-3 (GF-3) satellite is the first C-band multi-polarization synthetic aperture radar (SAR) imaging satellite with a resolution up to 1 m in China. It is also the only SAR satellite of the High-Resolution Earth Observation System designed for civilian use. There are 12 different imaging models to meet the needs of different industry users. However, to use SAR satellite images for related applications, they must possess high geometric accuracy. In order to verify the geometric accuracy achieved by the different modes of GF-3 images, we analyze the SAR geometric error source and perform geometric correction tests based on the RPC model with and without ground control points (GCPs) for five imaging modes. These include the spotlight (SL), ultra-fine strip (UFS), Fine Strip I (FSI), Full polarized Strip I (QPSI), and standard strip (SS) modes. Experimental results show that the check point residuals are large and consistent without GCPs, but the root mean square error of the independent checkpoints for the case of four corner control points is better than 1.5 pixels, achieving a similar level of geometric positioning accuracy to that of international satellites. We conclude that the GF-3 satellite can be used for high-accuracy geometric processing and related industry applications.

  3. Design developing conceptual models blade with geometric combined surface

    OpenAIRE

    Juraev, T. H.; Bukhara Technological Institute of Engineering, Bukhara

    2013-01-01

    A conceptual model of the blade using the methods of geometricmodeling principles of industrial design and CAD technologies. Variants are functional use of the proposed model for various working bodies.

  4. Procedures for Geometric Data Reduction in Solid Log Modelling

    Science.gov (United States)

    Luis G. Occeña; Wenzhen Chen; Daniel L. Schmoldt

    1995-01-01

    One of the difficulties in solid log modelling is working with huge data sets, such as those that come from computed axial tomographic imaging. Algorithmic procedures are described in this paper that have successfully reduced data without sacrificing modelling integrity.

  5. The Geometric Modelling of Furniture Parts and Its Application

    Institute of Scientific and Technical Information of China (English)

    张福炎; 蔡士杰; 王玉兰; 居正文

    1989-01-01

    In this paper, a 3-D solid modelling method appropriate for the design of furniture parts, which has been used in FCAD (Computer Aided Design for Furniture Structure )system, is introduced. Some interactive functions for modifying part models and deriving a variety of practical parts are described. Finally. the application of the modelling method to computer aided manufacturing of furniture parts is prospected.

  6. A simple numerical model of a geometrically nonlinear Timoshenko beam

    NARCIS (Netherlands)

    Keijdener, C.; Metrikine, A.

    2015-01-01

    In the original problem for which this model was developed, onedimensional flexible objects interact through a non-linear contact model. Due to the non-linear nature of the contact model, a numerical time-domain approach was adopted. One of the goals was to see if the coupling between axial and tran

  7. Computing the Intersection of a Plane and Geometric Primitives in VRML Model for Rapid Prototyping Software

    Institute of Scientific and Technical Information of China (English)

    LI Zhanli; SUN Xiuying

    2006-01-01

    VRML(Virtual Reality Modeling Language) format as an international standard for virtual reality, has already been widely adopted for graphical representation of 3D objects over the Web. Adopting VRML model in RP(Rapid Prototyping) can reduce the precision loss which is caused by triangulation in generating STL file. Hence exploring a slicing method and developing a slicing software for VRML model is important and significant to improve the accuracy of RP products. Finding intersections of a plane and VRML model is the key operation in slicing algorithm. This paper presents a method for calculating the intersections between a set of parallel planes and VRML geometric primitives. Based on the analysis of the relative position between a plane and a geometric primitive, intersection conditions in all cases were obtained, and the geometric parameters and corresponding equations of intersections were derived. The algorithm had been tested, and applications show that it is robust and effective.

  8. Observation of Schramm-Loewner evolution on the geometrical clusters of the Ising model

    Science.gov (United States)

    Najafi, M. N.

    2015-05-01

    Schramm-Loewner Evolution (SLE) is a stochastic process that, by focusing on the geometrical features of the two-dimensional (2D) conformal invariant models, classifies them using one real parameter κ. In this work we apply the SLE formalism to the exterior frontiers of the geometrical clusters (interfaces) of the two-dimensional critical Ising model on the triangular lattice. We first analyze the critical curves going from the real axis to the real axis in the upper half plane geometry and show numerically that SLE(κ, κ - 6) works well to extract the diffusivity parameter κ. We then analyze the conformal loops of the critical Ising model. After determining some geometrical exponents of the critical loops as the interfaces of the model in hand, we address the problem of application of SLE to conformal loops. We numerically show that SLE(κ, κ - 6) is more reliable than previous methods.

  9. Fixing Geometric Errors on Polygonal Models: A Survey

    Institute of Scientific and Technical Information of China (English)

    Tao Ju

    2009-01-01

    Polygonal models are popular representations of 3D objects. The use of polygonal models in computational applications often requires a model to properly bound a 3D solid. That is, the polygonal model needs to be closed, manifold, and free of self-intersections. This paper surveys a sizeable literature for repairing models that do not satisfy this criteria, focusing on categorizing them by their methodology and capability. We hope to offer pointers to further readings for researchers and practitioners, and suggestions of promising directions for future research endeavors.

  10. Littelmann path model for geometric crystals, Whittaker functions on Lie groups and Brownian motion

    Science.gov (United States)

    Chhaibi, Reda

    2013-02-01

    Generally speaking, this thesis focuses on the interplay between the representations of Lie groups and probability theory. It subdivides into essentially three parts. In a first rather algebraic part, we construct a path model for geometric crystals in the sense of Berenstein and Kazhdan, for complex semi-simple Lie groups. We will mainly describe the algebraic structure, its natural morphisms and parameterizations. The theory of total positivity will play a particularly important role. Then, we anticipate on the probabilistic part by exhibiting a canonical measure on geometric crystals. It uses as ingredients the superpotential for the flag manifold and a measure invariant under the crystal actions. The image measure under the weight map plays the role of Duistermaat-Heckman measure. Its Laplace transform defines Whittaker functions, providing an interesting formula for all Lie groups. Then it appears clearly that Whittaker functions are to geometric crystals, what characters are to combinatorial crystals. The Littlewood-Richardson rule is also exposed. Finally we present the probabilistic approach that allows to find the canonical measure. It is based on the fundamental idea that the Wiener measure will induce the adequate measure on the algebraic structures through the path model. In the last chapter, we show how our geometric model degenerates to the continuous classical Littelmann path model and thus recover known results. For example, the canonical measure on a geometric crystal of highest weight degenerates into a uniform measure on a polytope, and recovers the parameterizations of continuous crystals.

  11. Geometric Feature Extraction and Model Reconstruction Based on Scattered Data

    Institute of Scientific and Technical Information of China (English)

    胡鑫; 习俊通; 金烨

    2004-01-01

    A method of 3D model reconstruction based on scattered point data in reverse engineering is presented here. The topological relationship of scattered points was established firstly, then the data set was triangulated to reconstruct the mesh surface model. The curvatures of cloud data were calculated based on the mesh surface, and the point data were segmented by edge-based method; Every patch of data was fitted by quadric surface of freeform surface, and the type of quadric surface was decided by parameters automatically, at last the whole CAD model was created. An example of mouse model was employed to confirm the effect of the algorithm.

  12. Do Lumped-Parameter Models Provide the Correct Geometrical Damping?

    DEFF Research Database (Denmark)

    Andersen, Lars

    2007-01-01

    This paper concerns the formulation of lumped-parameter models for rigid footings on homogenous or stratified soil with focus on the horizontal sliding and rocking. Such models only contain a few degrees of freedom, which makes them ideal for inclusion in aero-elastic codes for wind turbines...

  13. Do Lumped-Parameter Models Provide the Correct Geometrical Damping?

    DEFF Research Database (Denmark)

    Andersen, Lars

    2007-01-01

    This paper concerns the formulation of lumped-parameter models for rigid footings on homogenous or stratified soil with focus on the horizontal sliding and rocking. Such models only contain a few degrees of freedom, which makes them ideal for inclusion in aero-elastic codes for wind turbines...

  14. Human supervisory approach to modeling industrial scenes using geometric primitives

    Energy Technology Data Exchange (ETDEWEB)

    Luck, J.P.; Little, C.Q.; Roberts, R.S.

    1997-11-19

    A three-dimensional world model is crucial for many robotic tasks. Modeling techniques tend to be either fully manual or autonomous. Manual methods are extremely time consuming but also highly accurate and flexible. Autonomous techniques are fast but inflexible and, with real-world data, often inaccurate. The method presented in this paper combines the two, yielding a highly efficient, flexible, and accurate mapping tool. The segmentation and modeling algorithms that compose the method are specifically designed for industrial environments, and are described in detail. A mapping system based on these algorithms has been designed. It enables a human supervisor to quickly construct a fully defined world model from unfiltered and unsegmented real-world range imagery. Examples of how industrial scenes are modeled with the mapping system are provided.

  15. On the Use of Geometric Modeling to Predict Aortic Aneurysm Rupture.

    Science.gov (United States)

    Muluk, Sruthi L; Muluk, Pallavi D; Shum, Judy; Finol, Ender A

    2017-05-22

    Currently, the risk of abdominal aortic aneurysm (AAA) rupture is determined using the maximum diameter (Dmax) of the aorta. We sought in this study to identify a set of computed tomography (CT)-based geometric parameters that would better predict the risk of rupture than Dmax. We obtained CT scans from 180 patients (90 ruptured AAA and 90 elective AAA repair) and then used automated software to calculate 1- , 2- , and 3-dimensional geometric parameters for each AAA. Linear regression was used to identify univariate correlates of membership in the rupture group. We then used stepwise backward elimination to generate a logistic regression model for prediction of rupture. Linear regression identified 40 correlates of rupture. Following stepwise backward elimination, we developed a multivariate logistic regression model containing 15 geometric parameters, including Dmax. This model was compared with a model containing Dmax alone. The multivariate model correctly classified 98% of all cases, whereas the Dmax-only model correctly classified 72% of cases. Receiver operating characteristic analysis showed that the multivariate model had an area under the curve of 0.995, as compared with 0.770 for the Dmax-only model. This difference was highly significant (P geometric factors entirely measurable from CT scanning can be a better predictor of AAA rupture than maximum diameter alone. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Quantitative forest canopy structure assessment using an inverted geometric-optical model and up-scaling

    NARCIS (Netherlands)

    Zeng, Y.; Schaepman, M.E.; Wu, B.; Clevers, J.G.P.W.; Bregt, A.K.

    2009-01-01

    The physical-based geometric-optical Li-Strahler model can be inverted to retrieve forest canopy structural variables. One of the main input variables of the inverted model is the fractional component of sunlit background (K g). K g is calculated by using pure reflectance spectra (endmembers) of the

  17. The Dixit-Stiglitz-Krugman Trade Model: A Geometric Note

    OpenAIRE

    Kikuchi, Toru

    2010-01-01

    In this note, we briefly review the now standard Dixit-Stiglitz-Krugman trade model of monopolistic competition. Furthermore, we propose a convincing graphical exposition that emphasizes the firms' entry-exit process.

  18. Single High Fidelity Geometric Data Sets for LCM - Model Requirements

    Science.gov (United States)

    2006-11-01

    material name (example, an HY80 steel ) plus additional material requirements (heat treatment, etc.) Creation of a more detailed description of the data...57 Figure 2.22. Typical Stress-Strain Curve for Steel (adapted from Ref 59) .............................. 60 Figure...structures are steel , aluminum and composites. The structural components that make up a global FEA model drive the fidelity of the model. For example

  19. The wave dragon. Now ready for test in real sea

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, H..; Hansen, R.; Friis-Madsen, E. (and others)

    2001-07-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type, utilizing a patented wave reflector design to focus the waves towards a ramp, and the overtopping is used for electricity production through a set of Kaplan/propeller hydro turbines. During the last 2 years, excessive design and testing has been performed on a scale 1:50 model of the Wave Dragon, and on a scale 1:3.5 model turbine. The survivability, overtopping, hydraulic response, turbine performance and feasibility have been verified. Furthermore regulation strategy, grid connection technology, generator technology, and mooring systems have been accommodated to the Wave Dragon. The main conclusions from this work are elaborated, and the future plans for, and expectations to, the technology is described. (au)

  20. Improving Completeness of Geometric Models from Terrestrial Laser Scanning Data

    Directory of Open Access Journals (Sweden)

    Clemens Nothegger

    2011-12-01

    Full Text Available The application of terrestrial laser scanning for the documentation of cultural heritage assets is becoming increasingly common. While the point cloud by itself is sufficient for satisfying many documentation needs, it is often desirable to use this data for applications other than documentation. For these purposes a triangulated model is usually required. The generation of topologically correct triangulated models from terrestrial laser scans, however, still requires much interactive editing. This is especially true when reconstructing models from medium range panoramic scanners and many scan positions. Because of residual errors in the instrument calibration and the limited spatial resolution due to the laser footprint, the point clouds from different scan positions never match perfectly. Under these circumstances many of the software packages commonly used for generating triangulated models produce models which have topological errors such as surface intersecting triangles, holes or triangles which violate the manifold property. We present an algorithm which significantly reduces the number of topological errors in the models from such data. The algorithm is a modification of the Poisson surface reconstruction algorithm. Poisson surfaces are resilient to noise in the data and the algorithm always produces a closed manifold surface. Our modified algorithm partitions the data into tiles and can thus be easily parallelized. Furthermore, it avoids introducing topological errors in occluded areas, albeit at the cost of producing models which are no longer guaranteed to be closed. The algorithm is applied to scan data of sculptures of the UNESCO World Heritage Site Schönbrunn Palace and data of a petrified oyster reef in Stetten, Austria. The results of the method’s application are discussed and compared with those of alternative methods.

  1. Evaluation of hydraulic response of the Wave Dragon

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The present study investigates the hydraulic response of the wave energy converter Wave Dragon. This is done by performing model tests in a wave tank in the Hydraulics and Coastal Engineering Laboratory at Aalborg University. In the model tests a floating scale model (length scale 1:50) of the Wave Dragon is subjected to irregular long crested irregular and short crested sea conditions corresponding to typical situations under which the Wave Dragon will produce power. Furthermore two situations corresponding to extreme storm conditions are tested. The objective of the study is to determine the wave induced forces in the moorings and in the junction between the reflectors and the reservoir part, and motions of the Wave Dragon situated in different sea conditions. On the background of the performed model tests and evaluation of the investigated concept is given. The floating model of Wave Dragon demonstrated a good behaviour and was able to collect water in all sea conditions. Motions in seas with up to 5 m significant wave height were reasonable. Though, the heave motion and the pitch motion seemed to be rather large. wave Dragon survived tests in very severe sea conditions with significant wave heights between 10 m and 15 m. This was the case for long crested waves and short crested as well. Some problems were seen while adjusting the crest freeboard to the different sea conditions. The maximum force in the instrumented junction between the reflector and the reservoir part was found to be approximately 30 MN (3.000 ton). Maximum forces in the mooring system were found to be 20 MN, 30 MN and 140 MN, respectively, giving stresses in the order of 1.000 MPa to 4.000 MPa in the pre-designed wires. (au)

  2. Sensitivity analysis of geometric errors in additive manufacturing medical models.

    Science.gov (United States)

    Pinto, Jose Miguel; Arrieta, Cristobal; Andia, Marcelo E; Uribe, Sergio; Ramos-Grez, Jorge; Vargas, Alex; Irarrazaval, Pablo; Tejos, Cristian

    2015-03-01

    Additive manufacturing (AM) models are used in medical applications for surgical planning, prosthesis design and teaching. For these applications, the accuracy of the AM models is essential. Unfortunately, this accuracy is compromised due to errors introduced by each of the building steps: image acquisition, segmentation, triangulation, printing and infiltration. However, the contribution of each step to the final error remains unclear. We performed a sensitivity analysis comparing errors obtained from a reference with those obtained modifying parameters of each building step. Our analysis considered global indexes to evaluate the overall error, and local indexes to show how this error is distributed along the surface of the AM models. Our results show that the standard building process tends to overestimate the AM models, i.e. models are larger than the original structures. They also show that the triangulation resolution and the segmentation threshold are critical factors, and that the errors are concentrated at regions with high curvatures. Errors could be reduced choosing better triangulation and printing resolutions, but there is an important need for modifying some of the standard building processes, particularly the segmentation algorithms. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

  3. MODELING AND COMPENSATION TECHNIQUE FOR THE GEOMETRIC ERRORS OF FIVE-AXIS CNC MACHINE TOOLS

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    One of the important trends in precision machining is the development of real-time error compensation technique.The error compensation for multi-axis CNC machine tools is very difficult and attractive.The modeling for the geometric error of five-axis CNC machine tools based on multi-body systems is proposed.And the key technique of the compensation-identifying geometric error parameters-is developed.The simulation of cutting workpiece to verify the modeling based on the multi-body systems is also considered.

  4. Requirements for tolerances in a CAM-I generalized, solid geometric modeling system

    Energy Technology Data Exchange (ETDEWEB)

    Easterday, R.J.

    1980-01-01

    For a geometric modeling system to support computer-assisted manufacturing, it is necessary that dimensioning and tolerancing information be available in computer-readable form. The requirements of a tolerancing scheme within a geometric modeling system are discussed; they include structure sufficient to characterize the tolerance specifications currently in use by industry, means to associate tolerance structures to the boundary representation, means to create and edit information in the tolerance structures, means to extract information from the data base, and functions to check for completeness and validity of the tolerances. 1 figure, 8 tables. (RWR)

  5. Optimization of absorption placement using geometrical acoustic models and least squares.

    Science.gov (United States)

    Saksela, Kai; Botts, Jonathan; Savioja, Lauri

    2015-04-01

    Given a geometrical model of a space, the problem of optimally placing absorption in a space to match a desired impulse response is in general nonlinear. This has led some to use costly optimization procedures. This letter reformulates absorption assignment as a constrained linear least-squares problem. Regularized solutions result in direct distribution of absorption in the room and can accommodate multiple frequency bands, multiple sources and receivers, and constraints on geometrical placement of absorption. The method is demonstrated using a beam tracing model, resulting in the optimal absorption placement on the walls and ceiling of a classroom.

  6. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    Science.gov (United States)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  7. Geometric data transfer between CAD systems: solid models

    DEFF Research Database (Denmark)

    Kroszynski, Uri; Palstroem, Bjarne; Trostmann, Erik

    1989-01-01

    The first phase of the ESPRIT project CAD*I resulted in a specification for the exchange of solid models as well as in some pilot implementations of processors based on this specification. The authors summarize the CAD*I approach, addressing the structure of neutral files for solids, entities......, and attributes supporting three kinds of representations: facilities for the transfer of parametric designs; referencing library components; and other general mechanisms. They also describe the current state of the specification and processor implementations and include an example of a CAD*I neutral file....... Results from cycle and intersystem solid model transfer tests are presented, showing the practicality of the CAD*I proposal. B-rep model transfer results are discussed in some detail. The relationship of this work to standardization efforts is outlined...

  8. Adaptive filtering for deformation parameter estimation in consideration of geometrical measurements and geophysical models

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    There are two kinds of methods in researching the crust deformation: geophysical method and geometrical (or observational) method. Considerable differences usually exist between the two kinds of results, because of the datum differences, geophysical model errors, observational model errors, and so on. Thus, it is reasonable to combine the two kinds of information to collect the crust deformation information. To use the reliable geometrical and geophysical information, we have to control the observational and geophysical model error influences on the estimated deformation parameters, and to balance their contributions to the evaluated parameters. A hybrid estimation strategy is proposed here for evaluating the deformation parameters employing an adaptively robust filtering. The effects of measurement outliers on the estimated parameters are controlled by robust equivalent weights. Adaptive factors are introduced to balance the contribution of the geophysical model information and the geometrical measurements to the model parameters. The datum for the local deformation analysis is mainly determined by the highly accurate IGS station velocities. The hybrid estimation strategy is applied in an actual GPS monitoring network. It is shown that the hybrid technique employs locally repeated geometrical displacements to reduce the displacement errors caused by the mis-modeling of geophysical technique, and thus improves the precision of the estimated crust deformation parameters.

  9. Rule-based spatial modeling with diffusing, geometrically constrained molecules

    OpenAIRE

    Lohel Maiko; Lenser Thorsten; Ibrahim Bashar; Gruenert Gerd; Hinze Thomas; Dittrich Peter

    2010-01-01

    Abstract Background We suggest a new type of modeling approach for the coarse grained, particle-based spatial simulation of combinatorially complex chemical reaction systems. In our approach molecules possess a location in the reactor as well as an orientation and geometry, while the reactions are carried out according to a list of implicitly specified reaction rules. Because the reaction rules can contain patterns for molecules, a combinatorially complex or even infinitely sized reaction net...

  10. Physical modeling of geometrically confined disordered protein assemblies

    Science.gov (United States)

    Ando, David

    2015-08-01

    The transport of cargo across the nuclear membrane is highly selective and accomplished by a poorly understood mechanism involving hundreds of nucleoporins lining the inside of the nuclear pore complex (NPC). Currently, there is no clear picture of the overall structure formed by this collection of proteins within the pore, primarily due to their disordered nature and uncertainty regarding the properties of individual nucleoporins. We first study the defining characteristics of the amino acid sequences of nucleoporins through bioinformatics techniques, although bioinformatics of disordered proteins is especially challenging given high mutation rates for homologous proteins and that functionality may not be strongly related to sequence. Here we have performed a novel bioinformatic analysis, based on the spatial clustering of physically relevant features such as binding motifs and charges within disordered proteins, on thousands of FG motif containing nucleoporins (FG nups). The biophysical mechanism by which the critical FG nups regulate nucleocytoplasmic transport has remained elusive, yet our analysis revealed a set of highly conserved spatial features in the sequence structure of individual FG nups, such as the separation, localization, and ordering of FG motifs and charged residues along the protein chain. These sequence features are likely conserved due to a common functionality between species regarding how FG nups functionally regulate traffic, therefore these results constrain current models and eliminate proposed biophysical mechanisms responsible for regulation of nucleocytoplasmic traffic in the NPC which would not result in such a conserved amino acid sequence structure. Additionally, this method allows us to identify potentially functionally analogous disordered proteins across distantly related species. To understand the physical implications of the sequence features on structure and dynamics of the nucleoporins, we performed coarse-grained simulations

  11. Mathematical calculation model for geometrical parameters of timber mesh design with orthogonal grid

    Directory of Open Access Journals (Sweden)

    Loktev Dmitriy Aleksandrovich

    Full Text Available Mesh cover design, a multi-element design, which ensures the correct geometrical arrangement of the elements, is a very important task. The purpose of the given article is the development of a mathematical model for selecting the geometric parameters of wooden arches with mesh orthogonal grid with different input data. In this article three variants of design were observed. The main differences between them are in the relative position of longitudinal and transverse components. When performing static calculations of such designs in order to achieve their subsequent correct assembly, the following location conditions were observed: all the items must strictly match with each other without a gap and without overlap. However, these conditions must be met for any ratio of height to the arch span, the number of longitudinal members and the thickness of longitudinal members. Inverse problems also take place. In this case, the geometric calculation is not possible to vary the cross-section elements, and the stress-strain state of the cover is provided by varying the pitch of the transverse arches of the elements, on which the geometric calculation has no influence. All this determines the need for universal mathematical models describing any geometrical parameter of the designs needed for their geometrical calculation. The basic approach for the development of such models is the use of the known trigonometric formulas, giving a complete description of the desired geometry of the arch. Finally three transcendental equations were obtained, the solution algorithm of which using Newton’s method is presented in the MathCAD. The complexity of solving such equations using the proposed algorithm in the MathCAD is reduced to a minimum.

  12. Wave Dragon Wave Energy Converters Used as Coastal Protection

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Kofoed, Jens Peter

    2011-01-01

    This paper deals with wave energy converters used to reduce the wave height along shorelines. For this study the Wave Dragon wave energy converter is chosen. The wave height reduction from a single device has been evaluated from physical model tests in scale 1:51.8 of the 260 x 150 m, 24 kW/m model...

  13. Geometrical and computer modeling of mechanical engineering surfaces products intersection line

    Science.gov (United States)

    Panchuk, K. L.; Kaygorodtseva, N. V.; Kaygorodtseva, T. N.; Yurkov, V. Yu

    2017-06-01

    In the design and manufacture of engineering products geometrical problem is known by shaping the surface of the product. An important element of general solution of this problem is to define the lines of surfaces intersection, forming the shape of designed product. Existing possibilities of modern CAD systems do not allow achieving fullness of the result in this direction. For example, control points and change point of visibility is difficult to identify in the product drawings. In addition, there are no possibilities of detecting imaginary points which are necessary for a complete analysis of intersection surfaces, and mapping these points in the drawing. The aim of the study is to develop a geometric algorithm of constructive determining the intersection line and is devoid of these shortcomings. The objectives of the study are testing the obtained algorithm by experimental verification with geometric modeling solutions to specific problems by tools CAD. This study adopted the method, which is based on quotient of geometric sets, which are regarded as intersecting surfaces in space E3 . One area of practical use of surface engineering products geometric algorithm - shaping is based on their intersection line.

  14. Simulation of mechanisms modeled by geometrically-exact beams using Rodrigues rotation parameters

    Science.gov (United States)

    Gay Neto, Alfredo

    2017-03-01

    We present mathematical models for joints, springs, dashpots and follower loads, to be used together with geometrically-exact beam finite elements to simulate mechanisms. The rotations are described using Rodrigues parameters. An updated-Lagrangian approach is employed, leading to the possibility of finite rotations involving many turns, overcoming possible singularities in the rotation tensor. We present formulations for spherical, hinge and universal (Cardan) joints, which are enforced by Lagrange multipliers. For the hinge joint, a torsional spring with a nonlinear damper model is presented. A geometric-nonlinear translational spring/dashpot model is proposed, such as follower loads. All formulations are presented detailing their contribution to the model weak form and tangent operator. These are employed together with implicit time-integration schemes. Numerical examples are performed, showing that the proposed formulations are able to model complex spatial mechanisms. Usage of the models together with contact interaction between beams is explored by a cam/follower mechanism example.

  15. Prototype Testing of the Wave Energy Converter Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Friis-Madsen, Erik

    2006-01-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power. In the period...... from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57!27 m wide and 237 tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world’s first offshore wave energy...

  16. Prototype Testing of the Wave Energy Converter Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter Bak; Friis-Madsen, Erik

    2004-01-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power. In the period...... from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57 x 27 m wide and 237 tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world's first offshore wave energy...

  17. Modeling cotton (Gossypium spp) leaves and canopy using computer aided geometric design (CAGD)

    Science.gov (United States)

    The goal of this research is to develop a geometrically accurate model of cotton crop canopies for exploring changes in canopy microenvironment and physiological function with leaf structure. We develop an accurate representation of the leaves, including changes in three-dimensional folding and orie...

  18. A population based statistical model for daily geometric variations in the thorax.

    Science.gov (United States)

    Szeto, Yenny Z; Witte, Marnix G; van Herk, Marcel; Sonke, Jan-Jakob

    2017-04-01

    To develop a population based statistical model of the systematic interfraction geometric variations between the planning CT and first treatment week of lung cancer patients for inclusion as uncertainty term in future probabilistic planning. Deformable image registrations between the planning CT and first week CBCTs of 235 lung cancer patients were used to generate deformation vector fields (DVFs) representing the geometric variations of lung cancer patients. Using a second deformable registration step, the average DVF per patient was mapped to an average patient CT. Subsequently, the dominant modes of systematic geometric variations were extracted using Principal Component Analysis (PCA). For evaluation a leave-one-out cross-validation was performed. The first three PCA components mainly described cranial-caudal, anterior-posterior, and left-right variations, respectively. Fifty and 112 components were needed to describe correspondingly 75% and 90% of the variance. An overall systematic variation of 3.6mm SD was observed and could be described with an accuracy of about 1.0mm with the PCA model. A PCA based model for systematic geometric variations in the thorax was developed, and its accuracy determined. Such a model can serve as a basis for probability based treatment planning in lung cancer patients. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Model Study of Wave Overtopping of Marine Structure for a Wide Range of Geometric Parameters

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter

    2000-01-01

    The objective of the study described in this paper is to enable estimation of wave overtopping rates for slopes/ramps given by a wide range of geometric parameters when subjected to varying wave conditions. To achieve this a great number of model tests are carried out in a wave tank using irregular...

  20. Optimal control for mathematical models of cancer therapies an application of geometric methods

    CERN Document Server

    Schättler, Heinz

    2015-01-01

    This book presents applications of geometric optimal control to real life biomedical problems with an emphasis on cancer treatments. A number of mathematical models for both classical and novel cancer treatments are presented as optimal control problems with the goal of constructing optimal protocols. The power of geometric methods is illustrated with fully worked out complete global solutions to these mathematically challenging problems. Elaborate constructions of optimal controls and corresponding system responses provide great examples of applications of the tools of geometric optimal control and the outcomes aid the design of simpler, practically realizable suboptimal protocols. The book blends mathematical rigor with practically important topics in an easily readable tutorial style. Graduate students and researchers in science and engineering, particularly biomathematics and more mathematical aspects of biomedical engineering, would find this book particularly useful.

  1. Modeling photosynthesis of discontinuous plant canopies by linking Geometric Optical Radiative Transfer model with biochemical processes

    Science.gov (United States)

    Xin, Q.; Gong, P.; Li, W.

    2015-02-01

    Modeling vegetation photosynthesis is essential for understanding carbon exchanges between terrestrial ecosystems and the atmosphere. The radiative transfer process within plant canopies is one of the key drivers that regulate canopy photosynthesis. Most vegetation cover consists of discrete plant crowns, of which the physical observation departs from the underlying assumption of a homogenous and uniform medium in classic radiative transfer theory. Here we advance the Geometric Optical Radiative Transfer (GORT) model to simulate photosynthesis activities for discontinuous plant canopies. We separate radiation absorption into two components that are absorbed by sunlit and shaded leaves, and derive analytical solutions by integrating over the canopy layer. To model leaf-level and canopy-level photosynthesis, leaf light absorption is then linked to the biochemical process of gas diffusion through leaf stomata. The canopy gap probability derived from GORT differs from classic radiative transfer theory, especially when the leaf area index is high, due to leaf clumping effects. Tree characteristics such as tree density, crown shape, and canopy length affect leaf clumping and regulate radiation interception. Modeled gross primary production (GPP) for two deciduous forest stands could explain more than 80% of the variance of flux tower measurements at both near hourly and daily time scales. We also demonstrate that the ambient CO2 concentration influences daytime vegetation photosynthesis, which needs to be considered in state-of-the-art biogeochemical models. The proposed model is complementary to classic radiative transfer theory and shows promise in modeling the radiative transfer process and photosynthetic activities over discontinuous forest canopies.

  2. Yang-Mills equation for the nuclear geometrical collective model connexion

    Science.gov (United States)

    Sparks, N.; Rosensteel, G.

    2017-01-01

    The Bohr-Mottelson collective model of rotations and quadrupole vibrations is a foundational model in nuclear structure physics. A modern formulation using differential geometry of bundles builds on this legacy collective model to allow a deformation-dependent interaction between rotational and vortical degrees of freedom. The interaction is described by the bundle connexion. This article reports the Yang-Mills equation for the connexion. For a class of solutions to the Yang-Mills equation, the differential geometric collective model attains agreement between experiment and theory for the moments of inertia of deformed isotopes. More generally, the differential geometric framework applies to models of emergent phenomena in which two interacting sets of degrees of freedom must be unified.

  3. Geometric modeling for citation networks with linearly growing scientific paper increment

    CERN Document Server

    Liu, Qi; Dong, Engming; Li, Jianping

    2016-01-01

    For the case that the numbers of annual published papers in some citation networks grow linearly, a geometric model is proposed to predict some statistical features of those networks, in which the academic influence scopes of papers are denoted through specific geometric areas related to time and space. In the model, nodes (papers) are uniformly and randomly sprinkled onto a cluster of circles of the Minkowski space whose centers are on the time axis. Edges (citations) are linked according to an influence mechanism which indicates an existing paper will be cited by a new paper locating in its influence zone. Considering the citations between papers in different disciplines, an interdisciplinary citation mechanism is added into the model in which some papers chosen with a small probability will cite some existing papers randomly and uniformly. Different from most existing models which only study the scale-free tail of the in-degree distribution, this model characterize the overall in-degree distribution well. ...

  4. Bubbly vertex dynamics: a dynamical and geometrical model for epithelial tissues with curved cell shapes

    CERN Document Server

    Ishimoto, Yukitaka

    2014-01-01

    In order to describe two-dimensionally packed cells in epithelial tissues both mathematically and physically, there have been developed several sorts of geometrical models, such as the vertex model, the finite element model, the cell-centered model, the cellular Potts model. So far, in any case, pressures have not neatly been dealt with and curvatures of the cell boundaries have been even omitted through their approximations. We focus on these quantities and formulate them on the vertex model. Thus, a model with the curvatures is constructed and its algorithm is given for simulation. Its possible extensions and applications will also be discussed.

  5. A geometric graph model for citation networks of exponentially growing scientific papers

    Science.gov (United States)

    Xie, Zheng; Ouyang, Zhenzheng; Liu, Qi; Li, Jianping

    2016-08-01

    In citation networks, the content relativity of papers is a precondition of engendering citations, which is hard to model by a topological graph. A geometric graph is proposed to predict some features of the citation networks with exponentially growing papers, which addresses the precondition by using coordinates of nodes to model the research contents of papers, and geometric distances between nodes to diversities of research contents between papers. Citations between modeled papers are drawn according to a geometric rule, which addresses the precondition as well as some other factors engendering citations, namely academic influences of papers, aging of those influences, and incomplete copying of references. Instead of cumulative advantage of degree, the model illustrates that the scale-free property of modeled networks arises from the inhomogeneous academic influences of modeled papers. The model can also reproduce some other statistical features of citation networks, e.g. in- and out-assortativities, which show the model provides a suitable tool to understand some aspects of citation networks by geometry.

  6. Geometric mechanics

    CERN Document Server

    Muniz Oliva, Waldyr

    2002-01-01

    Geometric Mechanics here means mechanics on a pseudo-riemannian manifold and the main goal is the study of some mechanical models and concepts, with emphasis on the intrinsic and geometric aspects arising in classical problems. The first seven chapters are written in the spirit of Newtonian Mechanics while the last two ones as well as two of the four appendices describe the foundations and some aspects of Special and General Relativity. All the material has a coordinate free presentation but, for the sake of motivation, many examples and exercises are included in order to exhibit the desirable flavor of physical applications.

  7. Dragon (repulsive guidance molecule b, RGMb) is a novel gene that promotes colorectal cancer growth.

    Science.gov (United States)

    Shi, Ying; Chen, Guo-Bin; Huang, Xiao-Xiao; Xiao, Chuan-Xing; Wang, Huan-Huan; Li, Ye-Sen; Zhang, Jin-Fang; Li, Shao; Xia, Yin; Ren, Jian-Lin; Guleng, Bayasi

    2015-08-21

    Colorectal cancer (CRC) is one of the most commonly diagnosed cancers and a major cause of cancer death. However, the molecular mechanisms underlying CRC initiation, growth and metastasis are poorly understood. Dragon (RGMb), a member of the repulsive guidance molecule (RGM) family, has been recently identified as a co-receptor for bone morphogenetic protein (BMP) signaling, but the role of Dragon in CRC development is undefined. Here, we show that Dragon expression was increased in colon cancer tissues compared to control tissues in CAC mouse model and in human patients. Dragon promoted proliferation of CT26.WT and CMT93 colon cancer cells and accelerated tumor growth in the xenograft mouse model. Dragon's action on colon cancer development was mediated via the BMP4-Smad1/5/8 and Erk1/2 pathways. Therefore, our results have revealed that Dragon is a novel gene that promotes CRC growth through the BMP pathway. Dragon may be exploited as a potential therapeutic target for CRC treatment.

  8. Dragon (repulsive guidance molecule b, RGMb) is a novel gene that promotes colorectal cancer growth

    Science.gov (United States)

    Shi, Ying; Chen, Guo-Bin; Huang, Xiao-Xiao; Xiao, Chuan-Xing; Wang, Huan-Huan; Li, Ye-Sen; Zhang, Jin-Fang; Li, Shao; Xia, Yin; Ren, Jian-Lin; Guleng, Bayasi

    2015-01-01

    Colorectal cancer (CRC) is one of the most commonly diagnosed cancers and a major cause of cancer death. However, the molecular mechanisms underlying CRC initiation, growth and metastasis are poorly understood. Dragon (RGMb), a member of the repulsive guidance molecule (RGM) family, has been recently identified as a co-receptor for bone morphogenetic protein (BMP) signaling, but the role of Dragon in CRC development is undefined. Here, we show that Dragon expression was increased in colon cancer tissues compared to control tissues in CAC mouse model and in human patients. Dragon promoted proliferation of CT26.WT and CMT93 colon cancer cells and accelerated tumor growth in the xenograft mouse model. Dragon's action on colon cancer development was mediated via the BMP4-Smad1/5/8 and Erk1/2 pathways. Therefore, our results have revealed that Dragon is a novel gene that promotes CRC growth through the BMP pathway. Dragon may be exploited as a potential therapeutic target for CRC treatment. PMID:26029998

  9. Analysis of Data from a Series of Events by a Geometric Process Model

    Institute of Scientific and Technical Information of China (English)

    Yeh Lam; Li-xing Zhu; Jennifer S. K. Chan; Qun Liu

    2004-01-01

    Geometric process was first introduced by Lam[10,11]. A stochastic process {Xi, i = 1, 2,…} is called a geometric process (GP) if, for some a > 0, {ai-1Xi, i = 1, 2,…} forms a renewal process. In thispaper, the GP is used to analyze the data from a series of events. A nonparametric method is introduced forthe estimation of the three parameters in the GP. The limiting distributions of the three estimators are studied.Through the analysis of some real data sets, the GP model is compared with other three homogeneous andnonhomogeneous Poisson models. It seems that on average the GP model is the best model among these fourmodels in analyzing the data from a series of events.

  10. Radmap: ''as-built'' cad models incorporating geometrical, radiological and material information

    Energy Technology Data Exchange (ETDEWEB)

    Piotrowski, L. [Electricite de France (EDF/DRD), 78 - Chatou (France); Lubawy, J.L. [Electricite de France (EDF/CNEPE), 37 - Tours (France)

    2001-07-01

    EDF intends to achieve successful and cost-effective dismantling of its obsolete nuclear plants. To reach this goal, EDF is currently extending its ''as-built'' 3-D modelling system to also include the location and characteristics of gamma sources in the geometrical models of its nuclear installations. The resulting system (called RADMAP) is a complete CAD chain covering 3-D and gamma data acquisitions, CAD modelling and exploitation of the final model. Its aim is to describe completely the geometrical and radiological state of a particular nuclear environment. This paper presents an overall view of RADMAP. The technical and functional characteristics of each element of the chain are indicated and illustrated using real (EDF) environments/applications. (author)

  11. A geometrical construction of rational boundary states in linear sigma models

    Energy Technology Data Exchange (ETDEWEB)

    Kennaway, Kristian D. E-mail: kennaway@usc.edu

    2002-12-30

    Starting from the geometrical construction of special Lagrangian submanifolds of a toric variety, we identify a certain subclass of A-type D-branes in the linear sigma model for a Calabi-Yau manifold and its mirror with the A- and B-type Recknagel-Schomerus boundary states of the Gepner model, by reproducing topological properties such as their labeling, intersection, and the relationships that exist in the homology lattice of the D-branes. In the non-linear sigma model phase these special Lagrangians reproduce an old construction of 3-cycles relevant for computing periods of the Calabi-Yau, and provide insight into other results in the literature on special Lagrangian submanifolds on compact Calabi-Yau manifolds. The geometrical construction of rational boundary states suggests several ways in which new Gepner model boundary states may be constructed.

  12. A geometric graph model of the coevolution between citations and coauthorships in scientific papers

    CERN Document Server

    Xie, Zheng; Li, Jianping; Li, Miao; Yi, Dongyun

    2016-01-01

    Collaborations and citations within scientific research grow simultaneously and interact dynamically. Modelling the coevolution between them helps to study many phenomena that can be approached only through combining citation and coauthorship data. A geometric graph for the coevolution is proposed, the mechanism of which synthetically expresses the interactive impacts of authors and papers in a geometrical way. The model is validated against a data set of papers published in PNAS during 2000-2015. The validation shows the ability to reproduce a range of features observed with citation and coauthorship data combined and separately. Particulary, in the empirical distribution of citations per author there exist two limits, in which the distribution appears as a generalized Poisson and a power-law respectively. Our model successfully reproduces the shape of the distribution, and provides an explanation for how the shape emerges. The model also captures the empirically positive correlations between the numbers of ...

  13. A model for geometric and mechanical adaptation of arteries to sustained hypertension.

    Science.gov (United States)

    Rachev, A; Stergiopulos, N; Meister, J J

    1998-02-01

    This study aimed to model phenomenologically the dynamics of arterial wall remodeling under hypertensive conditions. Sustained hypertension was simulated by a step increase in blood pressure. The arterial wall was considered to be a thick-walled tube made of nonlinear elastic incompressible material. Remodeling rate equations were postulated for the evolution of the geometric dimensions of the hypertensive artery at the zero-stress state, as well as for one of the material constants in the constitutive equations. The driving stimuli for the geometric adaptation are the normalized deviations of wall stresses from their values under normotensive conditions. The geometric dimensions are modulated by the evolution of the deformed inner radius, which serves to restore the level of the flow-induced shear stresses at the arterial endothelium. Mechanical adaptation is driven by the difference between the area compliance under hypertensive and normotensive conditions. The predicted time course of the geometry and mechanical properties of arterial wall are in good qualitative agreement with published experimental findings. The model predicts that the geometric adaptation maintains the stress distribution in arterial wall to its control level, while the mechanical adaptation restores the normal arterial function under induced hypertension.

  14. Wave Dragon Buoyancy Regulation Study

    DEFF Research Database (Denmark)

    Jakobsen, Jens; Kofoed, Jens Peter

    Wave Dragon is a wave energy converter, which was deployed offshore at Nissum Bredning in Denmark in 2003. The experience gained from operating Wave Dragon during 2003 and 2004 has shown that the buoyancy regulation system can be improved in a number of ways. This study describes the current situ...... situation, and proposes a number of activities in order to improve the buoyancy regulation system. This work was performed under EU ENERGIE contract no. ENK5-CT-2002-00603, and is a contribution to WP 2.3/2.4 and D40/D41....

  15. Geometrical nonlinear deformation model and its experimental study on bimorph giant magnetostrictive thin film

    Institute of Scientific and Technical Information of China (English)

    Wei LIU; Zhenyuan JIA; Fuji WANG; Yongshun ZHANG; Dongming GUO

    2008-01-01

    The geometrical nonlinearity of a giant magne-tostrictive thin film (GMF) can be clearly detected under the magnetostriction effect. Thus, using geometrical linear elastic theory to describe the strain, stress, and constitutive relationship of GMF is inaccurate. According to nonlinear elastic theory, a nonlinear deformation model of the bimorph GMF is established based on assumptions that the magnetostriction effect is equivalent to the effect of body force loaded on the GMF. With Taylor series method, the numerical solution is deduced. Experiments on TbDyFe/Polyimide (PI)/SmFe and TbDyFe/Cu/SmFe are then conducted to verify the proposed model, respectively. Results indicate that the nonlinear deflection curve model is in good conformity with the experimental data.

  16. Geometric and material modeling environment for the finite-difference time-domain method

    Science.gov (United States)

    Lee, Yong-Gu; Muhammad, Waleed

    2012-02-01

    The simulation of electromagnetic problems using the Finite-Difference Time-Domain method starts with the geometric design of the devices and their surroundings with appropriate materials and boundary conditions. This design stage is one of the most time consuming part in the Finite-Difference Time-Domain (FDTD) simulation of photonics devices. Many FDTD solvers have their own way of providing the design environment which can be burdensome for a new user to learn. In this work, geometric and material modeling features are developed on the freely available Google SketchUp, allowing users who are fond of its environment to easily model photonics simulations. The design and implementation of the modeling environment are discussed.

  17. Geometrical Derivation of Differential Kinematics to Calibrate Model Parameters of Flexible Manipulator

    Directory of Open Access Journals (Sweden)

    Bum-Joo Lee

    2013-02-01

    Full Text Available In this paper differential kinematics was geometrically derived to be utilized in a calibration algorithm that improves the accuracy of the manipulation of a robot. Even though the mechanical components are manufactured and assembled precisely, small differences between the designed and the actual system always exist, due to both geometric and unmodelled errors. In order to resolve these problems, differential relationships between the model parameters and the end‐effectorʹs posture were formulated. Subsequently, a derivative based estimation algorithm, such as an EKF (Extended Kalman Filter manner, could be adopted to update the model parameters. The proposed algorithm includes joint flexibility, so is an advanced version of previous work, where a rigid joint model was adopted [1]. The effectiveness of the proposed algorithm was verified by a computer simulation with a 6 DOF manipulator robot.

  18. Geant4.10 simulation of geometric model for metaphase chromosome

    Energy Technology Data Exchange (ETDEWEB)

    Rafat-Motavalli, L., E-mail: rafat@um.ac.ir; Miri-Hakimabad, H.; Bakhtiyari, E.

    2016-04-01

    In this paper, a geometric model of metaphase chromosome is explained. The model is constructed according to the packing ratio and dimension of the structure from nucleosome up to chromosome. A B-DNA base pair is used to construct 200 base pairs of nucleosomes. Each chromatin fiber loop, which is the unit of repeat, has 49,200 bp. This geometry is entered in Geant4.10 Monte Carlo simulation toolkit and can be extended to the whole metaphase chromosomes and any application in which a DNA geometrical model is needed. The chromosome base pairs, chromosome length, and relative length of chromosomes are calculated. The calculated relative length is compared to the relative length of human chromosomes.

  19. Region-based geometric modelling of human airways and arterial vessels.

    Science.gov (United States)

    Ding, Songlin; Ye, Yong; Tu, Jiyuan; Subic, Aleksandar

    2010-03-01

    Anatomically precise geometric models of human airways and arterial vessels play a critical role in the analysis of air and blood flows in human bodies. The established geometric modelling methods become invalid when the model consists of bronchioles or small vessels. This paper presents a new method for reconstructing the entire airway tree and carotid vessels from point clouds obtained from CT or MR images. A novel layer-by-layer searching algorithm has been developed to recognize branches of the airway tree and arterial vessels from the point clouds. Instead of applying uniform accuracy to all branches regardless of the number of available points, the surface patches on each branch are constructed adaptively based on the number of available elemental points, which leads to the elimination of distortions occurring at small bronchi and vessels.

  20. Geometrical origin of tricritical points of various U(1) lattice models

    CERN Document Server

    Janke, W; Janke, W; Kleinert, H

    1995-01-01

    We review the dual relationship between various compact U(1) lattice models and Abelian Higgs models, the latter being the disorder field theories of line-like topological excitations in the systems. We point out that the predicted first-order transitions in the Abelian Higgs models (Coleman-Weinberg mechanism) are, in three dimensions, in contradiction with direct numerical investigations in the compact U(1) formulation since these yield continuous transitions in the major part of the phase diagram. In four dimensions, there are indications from Monte Carlo data for a similar situation. Concentrating on the strong-coupling expansion in terms of geometrical objects, surfaces or lines, with certain statistical weights, we present semi-quantitative arguments explaining the observed cross-over from first-order to continuous transitions by the balance between the lowest two weights (``2:1 ratio'') of these geometrical objects.

  1. Geometrical Derivation of Differential Kinematics to Calibrate Model Parameters of Flexible Manipulator

    Directory of Open Access Journals (Sweden)

    Bum-Joo Lee

    2013-02-01

    Full Text Available In this paper differential kinematics was geometrically derived to be utilized in a calibration algorithm that improves the accuracy of the manipulation of a robot. Even though the mechanical components are manufactured and assembled precisely, small differences between the designed and the actual system always exist, due to both geometric and unmodelled errors. In order to resolve these problems, differential relationships between the model parameters and the end-effector's posture were formulated. Subsequently, a derivative based estimation algorithm, such as an EKF (Extended Kalman Filter manner, could be adopted to update the model parameters. The proposed algorithm includes joint flexibility, so is an advanced version of previous work, where a rigid joint model was adopted [1]. The effectiveness of the proposed algorithm was verified by a computer simulation with a 6 DOF manipulator robot.

  2. The aesthetic of dragon pattern elements in modern clothing

    Institute of Scientific and Technical Information of China (English)

    任倩慧

    2015-01-01

    Dragon pattern with a long history of traditional patterns,contains profound cultural connotation.This passage illustrate the aesthetic analysis of dragon pattern in modern clothing, analyze the aesthetic expression of dragon pattern with modern costume designer.

  3. Modeling photosynthesis of discontinuous plant canopies by linking Geometric Optical Radiative Transfer model with biochemical processes

    Directory of Open Access Journals (Sweden)

    Q. Xin

    2015-02-01

    Full Text Available Modeling vegetation photosynthesis is essential for understanding carbon exchanges between terrestrial ecosystems and the atmosphere. The radiative transfer process within plant canopies is one of the key drivers that regulate canopy photosynthesis. Most vegetation cover consists of discrete plant crowns, of which the physical observation departs from the underlying assumption of a homogenous and uniform medium in classic radiative transfer theory. Here we advance the Geometric Optical Radiative Transfer (GORT model to simulate photosynthesis activities for discontinuous plant canopies. We separate radiation absorption into two components that are absorbed by sunlit and shaded leaves, and derive analytical solutions by integrating over the canopy layer. To model leaf-level and canopy-level photosynthesis, leaf light absorption is then linked to the biochemical process of gas diffusion through leaf stomata. The canopy gap probability derived from GORT differs from classic radiative transfer theory, especially when the leaf area index is high, due to leaf clumping effects. Tree characteristics such as tree density, crown shape, and canopy length affect leaf clumping and regulate radiation interception. Modeled gross primary production (GPP for two deciduous forest stands could explain more than 80% of the variance of flux tower measurements at both near hourly and daily time scales. We also demonstrate that the ambient CO2 concentration influences daytime vegetation photosynthesis, which needs to be considered in state-of-the-art biogeochemical models. The proposed model is complementary to classic radiative transfer theory and shows promise in modeling the radiative transfer process and photosynthetic activities over discontinuous forest canopies.

  4. Fuzzy Decision-Making Approach in Geometric Programming for a Single Item EOQ Model

    Directory of Open Access Journals (Sweden)

    Monalisha Pattnaik

    2015-06-01

    Full Text Available Background and methods: Fuzzy decision-making approach is allowed in geometric programming for a single item EOQ model with dynamic ordering cost and demand-dependent unit cost. The setup cost varies with the quantity produced/purchased and the modification of objective function with storage area in the presence of imprecisely estimated parameters are investigated.  It incorporates all concepts of a fuzzy arithmetic approach, the quantity ordered, and demand per unit compares both fuzzy geometric programming technique and other models for linear membership functions.  Results and conclusions: Investigation of the properties of an optimal solution allows developing an algorithm whose validity is illustrated through an example problem and the results discu ssed. Sensitivity analysis of the optimal solution is also studied with respect to changes in different parameter values.  

  5. Partial SUSY Breaking for Asymmetric Gepner Models and Non-geometric Flux Vacua

    CERN Document Server

    Blumenhagen, Ralph; Plauschinn, Erik

    2016-01-01

    Using the method of simple current extensions, asymmetric Gepner models of Type IIB with N=1 space-time supersymmetry are constructed. The combinatorics of the massless vector fields suggests that these classical Minkowski string vacua provide fully backreacted solutions corresponding to N=1 minima of N=2 gauged supergravity. The latter contain abelian gaugings along the axionic isometries in the hypermultiplet moduli space, and can be considered as Type IIB flux compactifications on Calabi-Yau manifolds equipped with (non-)geometric fluxes. For a particular class of asymmetric Gepner models, we are able to explicitly specify the underlying CICYs and to check necessary conditions for a GSUGRA interpretation. If this conjecture is correct, there exists a large class of exactly solvable non-geometric flux compactifications on CY threefolds.

  6. Studies on a Double Poisson-Geometric Insurance Risk Model with Interference

    Directory of Open Access Journals (Sweden)

    Yujuan Huang

    2013-01-01

    Full Text Available This paper mainly studies a generalized double Poisson-Geometric insurance risk model. By martingale and stopping time approach, we obtain adjustment coefficient equation, the Lundberg inequality, and the formula for the ruin probability. Also the Laplace transformation of the time when the surplus reaches a given level for the first time is discussed, and the expectation and its variance are obtained. Finally, we give the numerical examples.

  7. Gluon Saturation Model with Geometric Scaling for Net-Baryon Distributions in Relativistic Heavy Ion Collisions

    Institute of Scientific and Technical Information of China (English)

    李双; 冯笙琴

    2012-01-01

    The net-baryon number is essentially transported by valence quarks that probe the saturation regime in the target by multiple scattering. The net-baryon distributions, nuclear stopping power and gluon saturation features in the SPS and RHIC energy regions are investigated by taking advantage of the gluon saturation model with geometric scaling. Predications are made for the net-baryon rapidity distributions, mean rapidity loss and gluon saturation features in central Pb + Pb collisions at LHC.

  8. Geometric Ergodicity of a Hypoelliptic Diffusion Modelling The Melt-Spinning Process of Nonwoven Materials

    CERN Document Server

    Kolb, Martin; Wubker, Achim

    2011-01-01

    We analyze the large time behavior of a stochastic model for the lay-down of fibers on a conveyor belt in the production process of nonwovens. It is shown, that under weak conditions this degenerate diffusion process is strong mixing, confirming a conjecture of Grothaus and Klar. Moreover, under some additional assumptions even geometric ergodicity is established using probabilistic tools -- described in the book of Meyn and Tweedie -- in combination with methods from stochastic analysis.

  9. Geometric and Hydrodynamic Characteristics of Three-dimensional Saturated Prefractal Porous Media Determined with Lattice Boltzmann Modeling

    Science.gov (United States)

    Fractal and prefractal geometric models have substantial potential of contributing to the analysis of flow and transport in porous media such as soils and reservoir rocks. In this study, geometric and hydrodynamic parameters of saturated 3D mass and pore-solid prefractal porous media were characteri...

  10. Simplified versus geometrically accurate models of forefoot anatomy to predict plantar pressures: A finite element study.

    Science.gov (United States)

    Telfer, Scott; Erdemir, Ahmet; Woodburn, James; Cavanagh, Peter R

    2016-01-25

    Integration of patient-specific biomechanical measurements into the design of therapeutic footwear has been shown to improve clinical outcomes in patients with diabetic foot disease. The addition of numerical simulations intended to optimise intervention design may help to build on these advances, however at present the time and labour required to generate and run personalised models of foot anatomy restrict their routine clinical utility. In this study we developed second-generation personalised simple finite element (FE) models of the forefoot with varying geometric fidelities. Plantar pressure predictions from barefoot, shod, and shod with insole simulations using simplified models were compared to those obtained from CT-based FE models incorporating more detailed representations of bone and tissue geometry. A simplified model including representations of metatarsals based on simple geometric shapes, embedded within a contoured soft tissue block with outer geometry acquired from a 3D surface scan was found to provide pressure predictions closest to the more complex model, with mean differences of 13.3kPa (SD 13.4), 12.52kPa (SD 11.9) and 9.6kPa (SD 9.3) for barefoot, shod, and insole conditions respectively. The simplified model design could be produced in 3h in the case of the more detailed model, and solved on average 24% faster. FE models of the forefoot based on simplified geometric representations of the metatarsal bones and soft tissue surface geometry from 3D surface scans may potentially provide a simulation approach with improved clinical utility, however further validity testing around a range of therapeutic footwear types is required.

  11. Monte Carlo based geometrical model for efficiency calculation of an n-type HPGe detector

    Energy Technology Data Exchange (ETDEWEB)

    Padilla Cabal, Fatima, E-mail: fpadilla@instec.c [Instituto Superior de Tecnologias y Ciencias Aplicadas, ' Quinta de los Molinos' Ave. Salvador Allende, esq. Luaces, Plaza de la Revolucion, Ciudad de la Habana, CP 10400 (Cuba); Lopez-Pino, Neivy; Luis Bernal-Castillo, Jose; Martinez-Palenzuela, Yisel; Aguilar-Mena, Jimmy; D' Alessandro, Katia; Arbelo, Yuniesky; Corrales, Yasser; Diaz, Oscar [Instituto Superior de Tecnologias y Ciencias Aplicadas, ' Quinta de los Molinos' Ave. Salvador Allende, esq. Luaces, Plaza de la Revolucion, Ciudad de la Habana, CP 10400 (Cuba)

    2010-12-15

    A procedure to optimize the geometrical model of an n-type detector is described. Sixteen lines from seven point sources ({sup 241}Am, {sup 133}Ba, {sup 22}Na, {sup 60}Co, {sup 57}Co, {sup 137}Cs and {sup 152}Eu) placed at three different source-to-detector distances (10, 20 and 30 cm) were used to calibrate a low-background gamma spectrometer between 26 and 1408 keV. Direct Monte Carlo techniques using the MCNPX 2.6 and GEANT 4 9.2 codes, and a semi-empirical procedure were performed to obtain theoretical efficiency curves. Since discrepancies were found between experimental and calculated data using the manufacturer parameters of the detector, a detail study of the crystal dimensions and the geometrical configuration is carried out. The relative deviation with experimental data decreases from a mean value of 18-4%, after the parameters were optimized.

  12. Connectivity and Coverage in Hybrid Wireless Sensor Networks using Dynamic Random Geometric Graph Model

    Directory of Open Access Journals (Sweden)

    Jasmine Norman

    2011-10-01

    Full Text Available Random Geometric Graphs have been a very influential and well-studied model of large networks, such assensor networks, where the network nodes are represented by the vertices of the RGG, and the direct connectivity between nodes is represented by the edges. This assumes homogeneous wireless nodes with uniform transmission ranges. In real life, there exist heterogeneous wireless networks in which devices have dramatically different capabilities. The connectivity of a WSN is related to the positions of nodes, and those positions are heavily affected by the method of sensor deployment. As sensors may be spread in an arbitrary manner, one of the fundamental issues in a wireless sensor network is the coverage problem. In this paper, I study connectivity and coverage in hybrid WSN based on dynamic random geometric graph.

  13. Monte Carlo based geometrical model for efficiency calculation of an n-type HPGe detector.

    Science.gov (United States)

    Cabal, Fatima Padilla; Lopez-Pino, Neivy; Bernal-Castillo, Jose Luis; Martinez-Palenzuela, Yisel; Aguilar-Mena, Jimmy; D'Alessandro, Katia; Arbelo, Yuniesky; Corrales, Yasser; Diaz, Oscar

    2010-12-01

    A procedure to optimize the geometrical model of an n-type detector is described. Sixteen lines from seven point sources ((241)Am, (133)Ba, (22)Na, (60)Co, (57)Co, (137)Cs and (152)Eu) placed at three different source-to-detector distances (10, 20 and 30 cm) were used to calibrate a low-background gamma spectrometer between 26 and 1408 keV. Direct Monte Carlo techniques using the MCNPX 2.6 and GEANT 4 9.2 codes, and a semi-empirical procedure were performed to obtain theoretical efficiency curves. Since discrepancies were found between experimental and calculated data using the manufacturer parameters of the detector, a detail study of the crystal dimensions and the geometrical configuration is carried out. The relative deviation with experimental data decreases from a mean value of 18-4%, after the parameters were optimized.

  14. Scaling of geometric phase versus band structure in cluster-Ising models

    Science.gov (United States)

    Nie, Wei; Mei, Feng; Amico, Luigi; Kwek, Leong Chuan

    2017-08-01

    We study the phase diagram of a class of models in which a generalized cluster interaction can be quenched by an Ising exchange interaction and external magnetic field. The various phases are studied through winding numbers. They may be ordinary phases with local order parameters or exotic ones, known as symmetry protected topologically ordered phases. Quantum phase transitions with dynamical critical exponents z =1 or z =2 are found. In particular, the criticality is analyzed through finite-size scaling of the geometric phase accumulated when the spins of the lattice perform an adiabatic precession. With this study, we quantify the scaling behavior of the geometric phase in relation to the topology and low-energy properties of the band structure of the system.

  15. Numerical Simulation of Wake Effects in the Lee of a Farm of Wave Dragon Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, C.; Troch, P.; De Visch, K.;

    2009-01-01

    . In this paper wake effects in the lee of a single Wave Dragon WEC and multiple Wave Dragon WECs are studied in a time-dependent mild-slope equation model. The Wave Dragon WEC is a floating offshore converter of the overtopping type. The water volume of overtopped waves is first captured in a basin above mean...... sea level and then drains back to the sea through hydro turbines. The wake dimensions behind a single Wave Dragon WEC are investigated for uni- and multidirectional waves. An increasing directional spreading results in a faster wave redistribution behind the WEC. The power absorption of a farm of five...... Wave Dragon WECs, installed in a staggered grid, is calculated for varying inbetween distances. It is observed that an in-between distance of 2D is preferred, when taking spatial and safety considerations into account....

  16. Geometric Brownian Motion, Option Pricing, and Simulation: Some Spreadsheet-Based Exercises in Financial Modeling

    Directory of Open Access Journals (Sweden)

    Kevin D. Brewer

    2012-11-01

    Full Text Available This paper presents some Excel-based simulation exercises that are suitable for use in financial modeling courses. Such exercises are based on a stochastic process of stock price movements, called geometric Brownian motion, that underlies the derivation of the Black-Scholes option pricing model. Guidance is provided in assigning appropriate values of the drift parameter in the stochastic process for such exercises. Some further simulation exercises are also suggested. As the analytical underpinning of the materials involved is provided, this paper is expected to be of interest also to instructors and students of investment courses.

  17. A 5G Hybrid Channel Model Considering Rays and Geometric Stochastic Propagation Graph

    DEFF Research Database (Denmark)

    Steinböck, Gerhard; Karstensen, Anders; Kyösti, Pekka;

    2016-01-01

    We consider a ray-tracing tool, in particular the METIS map based model for deterministic simulation of the channel impulse response. The ray-tracing tool is extended by adding a geometric stochastic propagation graph to model additional stochastic paths and the dense multipath components observed...... simplistic, e.g. plain walls and thus neglecting the structures on the building facades, window frames, window sills, etc. Thus in measurements there are often additional components observed that are not captured by these simplistic ray-tracing implementations. In this contribution we introduce a flexible...

  18. Analytical and numerical modeling of an axisymmetrical electrostatic transducer with interior geometrical discontinuity.

    Science.gov (United States)

    Honzík, Petr; Podkovskiy, Alexey; Durand, Stéphane; Joly, Nicolas; Bruneau, Michel

    2013-11-01

    The main purpose of the paper is to contribute at presenting an analytical and a numerical modeling which would be relevant for interpreting the couplings between a circular membrane, a peripheral cavity having the same external radius as the membrane, and a thin air gap (with a geometrical discontinuity between them), and then to characterize small scale electrostatic receivers and to propose procedures that could be suitable for fitting adjustable parameters to achieve optimal behavior in terms of sensitivity and bandwidth expected. Therefore, comparison between these theoretical methods and characterization of several shapes is dealt with, which show that the models would be appropriate to address the design of such transducers.

  19. Mixture models of geometric distributions in genomic analysis of inter-nucleotide distances

    Directory of Open Access Journals (Sweden)

    Adelaide Valente Freitas

    2013-11-01

    Full Text Available The mapping defined by inter-nucleotide distances (InD provides a reversible numerical representation of the primary structure of DNA. If nucleotides were independently placed along the genome, a finite mixture model of four geometric distributions could be fitted to the InD where the four marginal distributions would be the expected distributions of the four nucleotide types. We analyze a finite mixture model of geometric distributions (f_2, with marginals not explicitly addressed to the nucleotide types, as an approximation to the InD. We use BIC in the composite likelihood framework for choosing the number of components of the mixture and the EM algorithm for estimating the model parameters. Based on divergence profiles, an experimental study was carried out on the complete genomes of 45 species to evaluate f_2. Although the proposed model is not suited to the InD, our analysis shows that divergence profiles involving the empirical distribution of the InD are also exhibited by profiles involving f_2. It suggests that statistical regularities of the InD can be described by the model f_2. Some characteristics of the DNA sequences captured by the model f_2 are illustrated. In particular, clusterings of subgroups of eukaryotes (primates, mammalians, animals and plants are detected.

  20. The geometric signature: Quantifying landslide-terrain types from digital elevation models

    Science.gov (United States)

    Pike, R.J.

    1988-01-01

    Topography of various types and scales can be fingerprinted by computer analysis of altitude matrices (digital elevation models, or DEMs). The critical analytic tool is the geometric signature, a set of measures that describes topographic form well enough to distinguish among geomorphically disparate landscapes. Different surficial processes create topography with diagnostic forms that are recognizable in the field. The geometric signature abstracts those forms from contour maps or their DEMs and expresses them numerically. This multivariate characterization enables once-in-tractable problems to be addressed. The measures that constitute a geometric signature express different but complementary attributes of topographic form. Most parameters used here are statistical estimates of central tendency and dispersion for five major categories of terrain geometry; altitude, altitude variance spectrum, slope between slope reversals, and slope and its curvature at fixed slope lengths. As an experimental application of geometric signatures, two mapped terrain types associated with different processes of shallow landsliding in Marin County, California, were distinguished consistently by a 17-variable description of topography from 21??21 DEMs (30-m grid spacing). The small matrix is a statistical window that can be used to scan large DEMs by computer, thus potentially automating the mapping of contrasting terrain types. The two types in Marin County host either (1) slow slides: earth flows and slump-earth flows, or (2) rapid flows: debris avalanches and debris flows. The signature approach should adapt to terrain taxonomy and mapping in other areas, where conditions differ from those in Central California. ?? 1988 International Association for Mathematical Geology.

  1. Mathematical Model and Geometrical Model of Double Pitch ZN-type Worm Gear Set Based on Generation Mechanism

    Institute of Scientific and Technical Information of China (English)

    SHU Linsen; CAO Huajun; LI Xianchong; ZHANG Chenglong; LI Yuxia

    2015-01-01

    The current researches on the tooth surface mathematical equations and the theory of gearing malnly pay attention to the ordinary type worm gear set (e.g., ZN, ZA, or ZK). The research of forming mechanism and three-dimensional modeling method for the double pitch worm gear set is not enough. So there are some difficulties in mathematical model deducing and geometry modeling of double pitch ZN-type worm gear set based on generation mechanism. In order to establish the mathematical model and the precise geometric model of double pitch ZN-type worm gear set, the structural characteristics and generation mechanism of the double pitch ZN-type worm gear set are investigated. Mathematical model of the ZN-type worm gear set is derived based on its generation mechanism and the theory of gearing. According to the mathematical model of the worm gear set which has been developed, a geometry modeling method of the double pitch ZN-type worm and worm gear is presented. Furthermore, a geometrical precision calculate method is proposed to evaluate the geometrical quality of the double pitch worm gear set. As a result, the maximum error is less than 6´10–4 mm in magnitude, thus the model of the double pitch ZN-type worm gear set is avallable to meet the requirements of finite element analysis and engineering application. The derived mathematical model and the proposed geometrical modeling method are helpful to guiding the design, manufacture and contact analysis of the worm gear set.

  2. Application of the Time-Dependent Mild-Slope Equations for the Simulation of Wake Effects in the Lee of a Farm of Wave Dragon Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, Charlotte; Troch, Peter; Visch, Kenneth De;

    2010-01-01

    in a time-dependent mild-slope equation model by using numerical sponge layers. In this paper the developed WEC implementation is applied to a single Wave Dragon WEC and multiple Wave Dragon WECs. The Wave Dragon WEC is a floating offshore converter of the overtopping type. Two wave reflectors focus...... and reservoir) are simulated as porous structures, exhibiting the same reflection, respectively absorption characteristics as obtained for the prototype Wave Dragon WEC. The wake effects behind a single Wave Dragon WEC are studied in detail for uni- and multidirectional waves. The shadow zone indicating...... the wake effect is decreasing with increasing directional spreading. The wake in the lee of a farm of five Wave Dragon WECs, installed in a staggered grid (3 WECs in the first row and 2 WECs in the second row), is calculated for three in-between distances of respectively D, 2D and 3D, with D the distance...

  3. The Transmuted Geometric-Weibull distribution: Properties, Characterizations and Regression Models

    Directory of Open Access Journals (Sweden)

    Zohdy M Nofal

    2017-06-01

    Full Text Available We propose a new lifetime model called the transmuted geometric-Weibull distribution. Some of its structural properties including ordinary and incomplete moments, quantile and generating functions, probability weighted moments, Rényi and q-entropies and order statistics are derived. The maximum likelihood method is discussed to estimate the model parameters by means of Monte Carlo simulation study. A new location-scale regression model is introduced based on the proposed distribution. The new distribution is applied to two real data sets to illustrate its flexibility. Empirical results indicate that proposed distribution can be alternative model to other lifetime models available in the literature for modeling real data in many areas.

  4. A reinforcement learning approach to model interactions between landmarks and geometric cues during spatial learning.

    Science.gov (United States)

    Sheynikhovich, Denis; Arleo, Angelo

    2010-12-13

    In contrast to predictions derived from the associative learning theory, a number of behavioral studies suggested the absence of competition between geometric cues and landmarks in some experimental paradigms. In parallel to these studies, neurobiological experiments suggested the existence of separate independent memory systems which may not always interact according to classic associative principles. In this paper we attempt to combine these two lines of research by proposing a model of spatial learning that is based on the theory of multiple memory systems. In our model, a place-based locale strategy uses activities of modeled hippocampal place cells to drive navigation to a hidden goal, while a stimulus-response taxon strategy, presumably mediated by the dorso-lateral striatum, learns landmark-approaching behavior. A strategy selection network, proposed to reside in the prefrontal cortex, implements a simple reinforcement learning rule to switch behavioral strategies. The model is used to reproduce the results of a behavioral experiment in which an interaction between a landmark and geometric cues was studied. We show that this model, built on the basis of neurobiological data, can explain the lack of competition between the landmark and geometry, potentiation of geometry learning by the landmark, and blocking. Namely, we propose that the geometry potentiation is a consequence of cooperation between memory systems during learning, while blocking is due to competition between the memory systems during action selection.

  5. Modeling the Influence of Antifreeze Proteins on Three-Dimensional Ice Crystal Melt Shapes using a Geometric Approach

    CERN Document Server

    Liu, Jun Jie; Dolev, Maya Bar; Celik, Yeliz; Wettlaufer, J S; Braslavsky, Ido

    2012-01-01

    The melting of pure axisymmetric ice crystals has been described previously by us within the framework of so-called geometric crystal growth. Nonequilibrium ice crystal shapes evolving in the presence of hyperactive antifreeze proteins (hypAFPs) are experimentally observed to assume ellipsoidal geometries ("lemon" or "rice" shapes). To analyze such shapes we harness the underlying symmetry of hexagonal ice Ih and extend two-dimensional geometric models to three-dimensions to reproduce the experimental dissolution process. The geometrical model developed will be useful as a quantitative test of the mechanisms of interaction between hypAFPs and ice.

  6. Commissioning and operation of DRAGON

    CERN Document Server

    Engel, S

    2003-01-01

    The new DRAGON (Detector of Recoils And Gammas Of Nuclear reactions) facility, located at the TRIUMF-ISAC radioactive beams laboratory in Vancouver, Canada, has initiated its experimental program. Recently DRAGON was used for initial studies of the sup 2 sup 1 Na(p,gamma) sup 2 sup 2 Mg reaction. This facility was designed to measure absolutely the rates of radiative proton and alpha capture reactions of astrophysical interest to a precision of +-20%, using inverse kinematics. To fully understand the optics and operational parameters of the facility along with the transmission particularly of the reaction recoils, systematic studies of various configurations are in progress using stable beams along with measurements of well-known resonance reactions. The status of these commissioning studies is presented.

  7. A point cloud modeling method based on geometric constraints mixing the robust least squares method

    Science.gov (United States)

    Yue, JIanping; Pan, Yi; Yue, Shun; Liu, Dapeng; Liu, Bin; Huang, Nan

    2016-10-01

    The appearance of 3D laser scanning technology has provided a new method for the acquisition of spatial 3D information. It has been widely used in the field of Surveying and Mapping Engineering with the characteristics of automatic and high precision. 3D laser scanning data processing process mainly includes the external laser data acquisition, the internal industry laser data splicing, the late 3D modeling and data integration system. For the point cloud modeling, domestic and foreign researchers have done a lot of research. Surface reconstruction technology mainly include the point shape, the triangle model, the triangle Bezier surface model, the rectangular surface model and so on, and the neural network and the Alfa shape are also used in the curved surface reconstruction. But in these methods, it is often focused on single surface fitting, automatic or manual block fitting, which ignores the model's integrity. It leads to a serious problems in the model after stitching, that is, the surfaces fitting separately is often not satisfied with the well-known geometric constraints, such as parallel, vertical, a fixed angle, or a fixed distance. However, the research on the special modeling theory such as the dimension constraint and the position constraint is not used widely. One of the traditional modeling methods adding geometric constraints is a method combing the penalty function method and the Levenberg-Marquardt algorithm (L-M algorithm), whose stability is pretty good. But in the research process, it is found that the method is greatly influenced by the initial value. In this paper, we propose an improved method of point cloud model taking into account the geometric constraint. We first apply robust least-squares to enhance the initial value's accuracy, and then use penalty function method to transform constrained optimization problems into unconstrained optimization problems, and finally solve the problems using the L-M algorithm. The experimental results

  8. Optimising and extending the geometrical modeller of a physics simulation framework

    CERN Document Server

    Urban, P

    1998-01-01

    The design of highly complex particle detectors used in High Energy Physics involves both CAD systems and physics simulation packages like Geant4. Geant4 is able to exchange detector geometries with CAD systems, conforming to the Standard for the Exchange of Product Model Data (STEP); Boundary Representation (B-Rep) models are transferred. Particle tracking is performed in these models, requiring efficient and accurate intersection computations from the geometrical modeller. The results of extending and optimising the modeller of Geant4 form the contents of this thesis. Swept surfaces: surfaces of linear extrusion and surfaces of revolution have been implemented. The problem of classifying points on surfaces bounded by curves as being inside or outside has been solved. These tasks necessitated the extension and optimisation of code related to curves and lead to a re-design of this code. Emphasis was put on efficiency and on dealing with numerical errors. The results will be integrated into the upcoming beta t...

  9. Geometrical Lattice models for N=2 supersymmetric theories in two dimensions

    CERN Document Server

    Saleur, H

    1992-01-01

    We introduce in this paper two dimensional lattice models whose continuum limit belongs to the $N=2$ series. The first kind of model is integrable and obtained through a geometrical reformulation, generalizing results known in the $k=1$ case, of the $\\Gamma_{k}$ vertex models (based on the quantum algebra $U_{q}sl(2)$ and representation of spin $j=k/2$). We demonstrate in particular that at the $N=2$ point, the free energy of the $\\Gamma_{k}$ vertex model can be obtained exactly by counting arguments, without any Bethe ansatz computation, and we exhibit lattice operators that reproduce the chiral ring. The second class of models is more adequately described in the language of twisted $N=2$ supersymmetry, and consists of an infinite series of multicritical polymer points, which should lead to experimental realizations. It turns out that the exponents $\

  10. A geometric approach to modeling of four- and five-link planar snake-like robot

    Directory of Open Access Journals (Sweden)

    Tomáš Lipták

    2016-10-01

    Full Text Available The article deals with the issue of use of geometric mechanics tools in modelling nonholonomic systems. The introductory part of the article contains fiber bundle theory that we use at creating mathematical model of nonholonomic locomotion system with undulatory movement. Further the determination of general mathematical model for n-link snake-like robot is presented, where we used nonholonomic constraints. The relation between changes of shape and position variables was expressed using the local connection that was used to analyze and control system movement by vector fields. The effect of links number of snake-like robot on its mathematical model was investigated. The last part of this article consists of detailed description of modeling reconstruction equation for four- and five-link snake-like robot.

  11. On the geometric modulation of skin lesion growth: a mathematical model for melanoma

    Directory of Open Access Journals (Sweden)

    Ana Isabel Mendes

    Full Text Available Abstract Introduction Early detection of suspicious skin lesions is critical to prevent skin malignancies, particularly the melanoma, which is the most dangerous form of human skin cancer. In the last decade, image processing techniques have been an increasingly important tool for early detection and mathematical models play a relevant role in mapping the progression of lesions. Methods This work presents an algorithm to describe the evolution of the border of the skin lesion based on two main measurable markers: the symmetry and the geometric growth path of the lesion. The proposed methodology involves two dermoscopic images of the same melanocytic lesion obtained at different moments in time. By applying a mathematical model based on planar linear transformations, measurable parameters related to symmetry and growth are extracted. Results With this information one may compare the actual evolution in the lesion with the outcomes from the geometric model. First, this method was tested on predefined images whose growth was controlled and the symmetry known which were used for validation. Then the methodology was tested in real dermoscopic melanoma images in which the parameters of the mathematical model revealed symmetry and growth rates consistent with a typical melanoma behavior. Conclusions The method developed proved to show very accurate information about the target growth markers (variation on the growth along the border, the deformation and the symmetry of the lesion trough the time. All the results, validated by the expected phantom outputs, were similar to the ones on the real images.

  12. Efficiencies of power plants, quasi-static models and the geometric-mean temperature

    Science.gov (United States)

    Johal, Ramandeep S.

    2017-02-01

    Observed efficiencies of industrial power plants are often approximated by the square-root formula: 1 - √T-/T+, where T+(T-) is the highest (lowest) temperature achieved in the plant. This expression can be derived within finite-time thermodynamics, or, by entropy generation minimization, based on finite rates for the processes. In these analyses, a closely related quantity is the optimal value of the intermediate temperature for the hot stream, given by the geometric-mean value: √T+/T-. In this paper, instead of finite-time models, we propose to model the operation of plants by quasi-static work extraction models, with one reservoir (source/sink) as finite, while the other as practically infinite. No simplifying assumption is made on the nature of the finite system. This description is consistent with two model hypotheses, each yielding a specific value of the intermediate temperature, say T1 and T2. The lack of additional information on validity of the hypothesis that may be actually realized, motivates to approach the problem as an exercise in inductive inference. Thus we define an expected value of the intermediate temperature as the equally weighted mean: (T1 + T2)/2. It is shown that the expected value is very closely given by the geometric-mean value for almost all of the observed power plants.

  13. Geometric Context and Orientation Map Combination for Indoor Corridor Modeling Using a Single Image

    Science.gov (United States)

    Baligh Jahromi, Ali; Sohn, Gunho

    2016-06-01

    Since people spend most of their time indoors, their indoor activities and related issues in health, security and energy consumption have to be understood. Hence, gathering and representing spatial information of indoor spaces in form of 3D models become very important. Considering the available data gathering techniques with respect to the sensors cost and data processing time, single images proved to be one of the reliable sources. Many of the current single image based indoor space modeling methods are defining the scene as a single box primitive. This domain-specific knowledge is usually not applicable in various cases where multiple corridors are joined at one scene. Here, we addressed this issue by hypothesizing-verifying multiple box primitives which represents the indoor corridor layout. Middle-level perceptual organization is the foundation of the proposed method, which relies on finding corridor layout boundaries using both detected line segments and virtual rays created by orthogonal vanishing points. Due to the presence of objects, shadows and occlusions, a comprehensive interpretation of the edge relations is often concealed. This necessitates the utilization of virtual rays to create a physically valid layout hypothesis. Many of the former methods used Orientation Map or Geometric Context to evaluate their proposed layout hypotheses. Orientation map is a map that reveals the local belief of region orientations computed from line segments, and in a segmented image geometric context uses color, texture, edge, and vanishing point cues to estimate the likelihood of each possible label for all super-pixels. Here, the created layout hypotheses are evaluated by an objective function which considers the fusion of orientation map and geometric context with respect to the horizontal viewing angle at each image pixel. Finally, the best indoor corridor layout hypothesis which gets the highest score from the scoring function will be selected and converted to a 3D

  14. Geometrical order-of-magnitude estimates for spatial curvature in realistic models of the Universe

    CERN Document Server

    Buchert, Thomas; van Elst, Henk; 10.1007/s10714-009-0828-4

    2009-01-01

    The thoughts expressed in this article are based on remarks made by J\\"urgen Ehlers at the Albert-Einstein-Institut, Golm, Germany in July 2007. The main objective of this article is to demonstrate, in terms of plausible order-of-magnitude estimates for geometrical scalars, the relevance of spatial curvature in realistic models of the Universe that describe the dynamics of structure formation since the epoch of matter-radiation decoupling. We introduce these estimates with a commentary on the use of a quasi-Newtonian metric form in this context.

  15. Optimized phenomenological renormalization group for geometrical models: Applications to diffusion-limited aggregation

    Science.gov (United States)

    Montag, J. Lee; Family, Fereydoon; Vicsek, Tamas; Nakanishi, Hisao

    1985-10-01

    We propose a new phenomenological rule for the weight function in the position-space renormalization-group approach for the calculation of the fractal dimension in models of geometrical disorder in order to avoid strong corrections to scaling due to surface effects. In our scheme the radius of gyration is used as a characteristic measure of the spatial extent of the clusters. In addition, an optimization parameter is introduced. Application to diffusion-limited aggregation in two dimensions shows that our method gives good estimates even when relatively small cells are used.

  16. Matching Aerial Images to 3D Building Models Using Context-Based Geometric Hashing.

    Science.gov (United States)

    Jung, Jaewook; Sohn, Gunho; Bang, Kiin; Wichmann, Andreas; Armenakis, Costas; Kada, Martin

    2016-06-22

    A city is a dynamic entity, which environment is continuously changing over time. Accordingly, its virtual city models also need to be regularly updated to support accurate model-based decisions for various applications, including urban planning, emergency response and autonomous navigation. A concept of continuous city modeling is to progressively reconstruct city models by accommodating their changes recognized in spatio-temporal domain, while preserving unchanged structures. A first critical step for continuous city modeling is to coherently register remotely sensed data taken at different epochs with existing building models. This paper presents a new model-to-image registration method using a context-based geometric hashing (CGH) method to align a single image with existing 3D building models. This model-to-image registration process consists of three steps: (1) feature extraction; (2) similarity measure; and matching, and (3) estimating exterior orientation parameters (EOPs) of a single image. For feature extraction, we propose two types of matching cues: edged corner features representing the saliency of building corner points with associated edges, and contextual relations among the edged corner features within an individual roof. A set of matched corners are found with given proximity measure through geometric hashing, and optimal matches are then finally determined by maximizing the matching cost encoding contextual similarity between matching candidates. Final matched corners are used for adjusting EOPs of the single airborne image by the least square method based on collinearity equations. The result shows that acceptable accuracy of EOPs of a single image can be achievable using the proposed registration approach as an alternative to a labor-intensive manual registration process.

  17. Matching Aerial Images to 3D Building Models Using Context-Based Geometric Hashing

    Directory of Open Access Journals (Sweden)

    Jaewook Jung

    2016-06-01

    Full Text Available A city is a dynamic entity, which environment is continuously changing over time. Accordingly, its virtual city models also need to be regularly updated to support accurate model-based decisions for various applications, including urban planning, emergency response and autonomous navigation. A concept of continuous city modeling is to progressively reconstruct city models by accommodating their changes recognized in spatio-temporal domain, while preserving unchanged structures. A first critical step for continuous city modeling is to coherently register remotely sensed data taken at different epochs with existing building models. This paper presents a new model-to-image registration method using a context-based geometric hashing (CGH method to align a single image with existing 3D building models. This model-to-image registration process consists of three steps: (1 feature extraction; (2 similarity measure; and matching, and (3 estimating exterior orientation parameters (EOPs of a single image. For feature extraction, we propose two types of matching cues: edged corner features representing the saliency of building corner points with associated edges, and contextual relations among the edged corner features within an individual roof. A set of matched corners are found with given proximity measure through geometric hashing, and optimal matches are then finally determined by maximizing the matching cost encoding contextual similarity between matching candidates. Final matched corners are used for adjusting EOPs of the single airborne image by the least square method based on collinearity equations. The result shows that acceptable accuracy of EOPs of a single image can be achievable using the proposed registration approach as an alternative to a labor-intensive manual registration process.

  18. A discrete model for geometrically nonlinear transverse free constrained vibrations of beams with various end conditions

    Science.gov (United States)

    Rahmouni, A.; Beidouri, Z.; Benamar, R.

    2013-09-01

    The purpose of the present paper was the development of a physically discrete model for geometrically nonlinear free transverse constrained vibrations of beams, which may replace, if sufficient degrees of freedom are used, the previously developed continuous nonlinear beam constrained vibration models. The discrete model proposed is an N-Degrees of Freedom (N-dof) system made of N masses placed at the ends of solid bars connected by torsional springs, presenting the beam flexural rigidity. The large transverse displacements of the bar ends induce a variation in their lengths giving rise to axial forces modelled by longitudinal springs. The calculations made allowed application of the semi-analytical model developed previously for nonlinear structural vibration involving three tensors, namely the mass tensor mij, the linear rigidity tensor kij and the nonlinearity tensor bijkl. By application of Hamilton's principle and spectral analysis, the nonlinear vibration problem is reduced to a nonlinear algebraic system, examined for increasing numbers of dof. The results obtained by the physically discrete model showed a good agreement and a quick convergence to the equivalent continuous beam model, for various fixed boundary conditions, for both the linear frequencies and the nonlinear backbone curves, and also for the corresponding mode shapes. The model, validated here for the simply supported and clamped ends, may be used in further works to present the flexural linear and nonlinear constrained vibrations of beams with various types of discontinuities in the mass or in the elasticity distributions. The development of an adequate discrete model including the effect of the axial strains induced by large displacement amplitudes, which is predominant in geometrically nonlinear transverse constrained vibrations of beams [1]. The investigation of the results such a discrete model may lead to in the case of nonlinear free vibrations. The development of the analogy between the

  19. A Geometric Method for Model Reduction of Biochemical Networks with Polynomial Rate Functions.

    Science.gov (United States)

    Samal, Satya Swarup; Grigoriev, Dima; Fröhlich, Holger; Weber, Andreas; Radulescu, Ovidiu

    2015-12-01

    Model reduction of biochemical networks relies on the knowledge of slow and fast variables. We provide a geometric method, based on the Newton polytope, to identify slow variables of a biochemical network with polynomial rate functions. The gist of the method is the notion of tropical equilibration that provides approximate descriptions of slow invariant manifolds. Compared to extant numerical algorithms such as the intrinsic low-dimensional manifold method, our approach is symbolic and utilizes orders of magnitude instead of precise values of the model parameters. Application of this method to a large collection of biochemical network models supports the idea that the number of dynamical variables in minimal models of cell physiology can be small, in spite of the large number of molecular regulatory actors.

  20. A Simplified Geometric Channel Model for Mobile-to-Mobile Communications

    Directory of Open Access Journals (Sweden)

    K. B. Baltzis

    2011-12-01

    Full Text Available In Mobile-to-Mobile (M2M communications, the communicating nodes are surrounded by scatterers and equipped with low elevation antennas. This paper proposes a simple 2-D geometric scattering model for M2M channels. The model is also applicable in cellular systems when we employ low height base station antennas. In our approach, the scatterers are uniformly distributed in ellipses with arbitrary size and orientation around each communicating node. We provide simple formulas for the calculation of the angular spread and delay variation of the propagating signal. Simulation results verify the accuracy of the model. In order to validate the generalization of the approach, we compare it against notable models in the literature. As an application example, we investigate the impact of scatterer distribution and separation between mobiles on the angle and time of arrival statistics of the multipaths.

  1. A simple geometrical model describing shapes of soap films suspended on two rings

    Science.gov (United States)

    Herrmann, Felix J.; Kilvington, Charles D.; Wildenberg, Rebekah L.; Camacho, Franco E.; Walecki, Wojciech J.; Walecki, Peter S.; Walecki, Eve S.

    2016-09-01

    We measured and analysed the stability of two types of soap films suspended on two rings using the simple conical frusta-based model, where we use common definition of conical frustum as a portion of a cone that lies between two parallel planes cutting it. Using frusta-based we reproduced very well-known results for catenoid surfaces with and without a central disk. We present for the first time a simple conical frusta based spreadsheet model of the soap surface. This very simple, elementary, geometrical model produces results surprisingly well matching the experimental data and known exact analytical solutions. The experiment and the spreadsheet model can be used as a powerful teaching tool for pre-calculus and geometry students.

  2. The Dynamic Modeling of Multiple Pairs of Spur Gears in Mesh, Including Friction and Geometrical Errors

    Directory of Open Access Journals (Sweden)

    Shengxiang Jia

    2003-01-01

    Full Text Available This article presents a dynamic model of three shafts and two pair of gears in mesh, with 26 degrees of freedom, including the effects of variable tooth stiffness, pitch and profile errors, friction, and a localized tooth crack on one of the gears. The article also details howgeometrical errors in teeth can be included in a model. The model incorporates the effects of variations in torsional mesh stiffness in gear teeth by using a common formula to describe stiffness that occurs as the gears mesh together. The comparison between the presence and absence of geometrical errors in teeth was made by using Matlab and Simulink models, which were developed from the equations of motion. The effects of pitch and profile errors on the resultant input pinion angular velocity coherent-signal of the input pinion's average are discussed by investigating some of the common diagnostic functions and changes to the frequency spectra results.

  3. The unfolded universe of elementary particles. A geometric explanation of the standard model structure

    CERN Document Server

    Bennequin, Daniel

    2016-01-01

    We propose a geometric explanation of the standard model of Glashow, Weinberg and Salam for the known elementary particles. Our model is a generic Quantum Field Theory in dimension four, obtained by developing along a Lorentz sub-manifold the lagrangian of Einstein and Dirac in dimension twelve. The main mechanism which gives birth to the standard model is a certain gauge fixing of triality, which permits to identify the multiplicity of fermions, as seen from the four dimensional world, with the eight unseen dimensions of the generating universe. In this way we get the known tables of particles, explaining the series of fermions and the gauge bosons. We suggest that the Higgs field dynamics could appear through a bosonization of the right handed neutrino and correspond to a displacement in the unseen dimensions. We also propose hypotheses for dark matter, and perhaps dark energy. Then we suggest predictions to go beyond the standard model.

  4. MATCHING AERIAL IMAGES TO 3D BUILDING MODELS BASED ON CONTEXT-BASED GEOMETRIC HASHING

    Directory of Open Access Journals (Sweden)

    J. Jung

    2016-06-01

    Full Text Available In this paper, a new model-to-image framework to automatically align a single airborne image with existing 3D building models using geometric hashing is proposed. As a prerequisite process for various applications such as data fusion, object tracking, change detection and texture mapping, the proposed registration method is used for determining accurate exterior orientation parameters (EOPs of a single image. This model-to-image matching process consists of three steps: 1 feature extraction, 2 similarity measure and matching, and 3 adjustment of EOPs of a single image. For feature extraction, we proposed two types of matching cues, edged corner points representing the saliency of building corner points with associated edges and contextual relations among the edged corner points within an individual roof. These matching features are extracted from both 3D building and a single airborne image. A set of matched corners are found with given proximity measure through geometric hashing and optimal matches are then finally determined by maximizing the matching cost encoding contextual similarity between matching candidates. Final matched corners are used for adjusting EOPs of the single airborne image by the least square method based on co-linearity equations. The result shows that acceptable accuracy of single image's EOP can be achievable by the proposed registration approach as an alternative to labour-intensive manual registration process.

  5. Morphological Plant Modeling: Unleashing Geometric and Topological Potential within the Plant Sciences

    Science.gov (United States)

    Bucksch, Alexander; Atta-Boateng, Acheampong; Azihou, Akomian F.; Battogtokh, Dorjsuren; Baumgartner, Aly; Binder, Brad M.; Braybrook, Siobhan A.; Chang, Cynthia; Coneva, Viktoirya; DeWitt, Thomas J.; Fletcher, Alexander G.; Gehan, Malia A.; Diaz-Martinez, Diego Hernan; Hong, Lilan; Iyer-Pascuzzi, Anjali S.; Klein, Laura L.; Leiboff, Samuel; Li, Mao; Lynch, Jonathan P.; Maizel, Alexis; Maloof, Julin N.; Markelz, R. J. Cody; Martinez, Ciera C.; Miller, Laura A.; Mio, Washington; Palubicki, Wojtek; Poorter, Hendrik; Pradal, Christophe; Price, Charles A.; Puttonen, Eetu; Reese, John B.; Rellán-Álvarez, Rubén; Spalding, Edgar P.; Sparks, Erin E.; Topp, Christopher N.; Williams, Joseph H.; Chitwood, Daniel H.

    2017-01-01

    The geometries and topologies of leaves, flowers, roots, shoots, and their arrangements have fascinated plant biologists and mathematicians alike. As such, plant morphology is inherently mathematical in that it describes plant form and architecture with geometrical and topological techniques. Gaining an understanding of how to modify plant morphology, through molecular biology and breeding, aided by a mathematical perspective, is critical to improving agriculture, and the monitoring of ecosystems is vital to modeling a future with fewer natural resources. In this white paper, we begin with an overview in quantifying the form of plants and mathematical models of patterning in plants. We then explore the fundamental challenges that remain unanswered concerning plant morphology, from the barriers preventing the prediction of phenotype from genotype to modeling the movement of leaves in air streams. We end with a discussion concerning the education of plant morphology synthesizing biological and mathematical approaches and ways to facilitate research advances through outreach, cross-disciplinary training, and open science. Unleashing the potential of geometric and topological approaches in the plant sciences promises to transform our understanding of both plants and mathematics. PMID:28659934

  6. Matching Aerial Images to 3d Building Models Based on Context-Based Geometric Hashing

    Science.gov (United States)

    Jung, J.; Bang, K.; Sohn, G.; Armenakis, C.

    2016-06-01

    In this paper, a new model-to-image framework to automatically align a single airborne image with existing 3D building models using geometric hashing is proposed. As a prerequisite process for various applications such as data fusion, object tracking, change detection and texture mapping, the proposed registration method is used for determining accurate exterior orientation parameters (EOPs) of a single image. This model-to-image matching process consists of three steps: 1) feature extraction, 2) similarity measure and matching, and 3) adjustment of EOPs of a single image. For feature extraction, we proposed two types of matching cues, edged corner points representing the saliency of building corner points with associated edges and contextual relations among the edged corner points within an individual roof. These matching features are extracted from both 3D building and a single airborne image. A set of matched corners are found with given proximity measure through geometric hashing and optimal matches are then finally determined by maximizing the matching cost encoding contextual similarity between matching candidates. Final matched corners are used for adjusting EOPs of the single airborne image by the least square method based on co-linearity equations. The result shows that acceptable accuracy of single image's EOP can be achievable by the proposed registration approach as an alternative to labour-intensive manual registration process.

  7. VOLUMETRIC ERROR COMPENSATION IN FIVE-AXIS CNC MACHINING CENTER THROUGH KINEMATICS MODELING OF GEOMETRIC ERROR

    Directory of Open Access Journals (Sweden)

    Pooyan Vahidi Pashsaki

    2016-06-01

    Full Text Available Accuracy of a five-axis CNC machine tool is affected by a vast number of error sources. This paper investigates volumetric error modeling and its compensation to the basis for creation of new tool path for improvement of work pieces accuracy. The volumetric error model of a five-axis machine tool with the configuration RTTTR (tilting head B-axis and rotary table in work piece side A΄ was set up taking into consideration rigid body kinematics and homogeneous transformation matrix, in which 43 error components are included. Volumetric error comprises 43 error components that can separately reduce geometrical and dimensional accuracy of work pieces. The machining accuracy of work piece is guaranteed due to the position of the cutting tool center point (TCP relative to the work piece. The cutting tool is deviated from its ideal position relative to the work piece and machining error is experienced. For compensation process detection of the present tool path and analysis of the RTTTR five-axis CNC machine tools geometrical error, translating current position of component to compensated positions using the Kinematics error model, converting newly created component to new tool paths using the compensation algorithms and finally editing old G-codes using G-code generator algorithm have been employed.

  8. Geometric dimension model of virtual astronaut body for ergonomic analysis of man-machine space system

    Science.gov (United States)

    Qianxiang, Zhou

    2012-07-01

    It is very important to clarify the geometric characteristic of human body segment and constitute analysis model for ergonomic design and the application of ergonomic virtual human. The typical anthropometric data of 1122 Chinese men aged 20-35 years were collected using three-dimensional laser scanner for human body. According to the correlation between different parameters, curve fitting were made between seven trunk parameters and ten body parameters with the SPSS 16.0 software. It can be concluded that hip circumference and shoulder breadth are the most important parameters in the models and the two parameters have high correlation with the others parameters of human body. By comparison with the conventional regressive curves, the present regression equation with the seven trunk parameters is more accurate to forecast the geometric dimensions of head, neck, height and the four limbs with high precision. Therefore, it is greatly valuable for ergonomic design and analysis of man-machine system.This result will be very useful to astronaut body model analysis and application.

  9. Dynamic lung modeling and tumor tracking using deformable image registration and geometric smoothing.

    Science.gov (United States)

    Zhang, Yongjie; Jing, Yiming; Liang, Xinghua; Xu, Guoliang; Dong, Lei

    2012-09-01

    A greyscale-based fully automatic deformable image registration algorithm, based on an optical flow method together with geometric smoothing, is developed for dynamic lung modeling and tumor tracking. In our computational processing pipeline, the input data is a set of 4D CT images with 10 phases. The triangle mesh of the lung model is directly extracted from the more stable exhale phase (Phase 5). In addition, we represent the lung surface model in 3D volumetric format by applying a signed distance function and then generate tetrahedral meshes. Our registration algorithm works for both triangle and tetrahedral meshes. In CT images, the intensity value reflects the local tissue density. For each grid point, we calculate the displacement from the static image (phase 5) to match with the moving image (other phases) by using merely intensity values of the CT images. The optical flow computation is followed by a regularization of the deformation field using geometric smoothing. Lung volume change and the maximum lung tissue movement are used to evaluate the accuracy of the application. Our testing results suggest that the application of deformable registration algorithm is an effective way for delineating and tracking tumor motion in image-guided radiotherapy.

  10. Geometrical characteristics of the enlarged fused hard sphere models of simple molecules.

    Science.gov (United States)

    Boublík, Tomas

    2005-10-20

    The enlarged fused hard sphere model represents a compromise between fused hard sphere- and hard convex body models of repulsive interactions of nonspherical molecules. Geometric functionals of the enlarged fused hard sphere models, i.e., the hard body volume, surface area, and "mean radius" for 25 molecules of the linear and approximately planar shapes (cycloalkanes and aromatic compounds), neopentane and cyclohexane were determined from the bond lengths and bond angles and expressed in the dimensionless form. The hard sphere diameters, first approximated by the values found from the correlation of the second virial coefficients, were then adjusted to heats of vaporization of the studied compounds. Parameters of nonsphericity and molar volumes, evaluated from these characteristics, are compared with parameters of modern semiempirical equations of state (BACK, BACKONE, SAFT). The calculated geometric quantities for a series of compounds make it possible to improve methods of determining the characteristic parameters of the modern semiempirical equations of state, as well as those from the perturbation approaches.

  11. Morphological Plant Modeling: Unleashing Geometric and Topological Potential within the Plant Sciences

    Directory of Open Access Journals (Sweden)

    Alexander Bucksch

    2017-06-01

    Full Text Available The geometries and topologies of leaves, flowers, roots, shoots, and their arrangements have fascinated plant biologists and mathematicians alike. As such, plant morphology is inherently mathematical in that it describes plant form and architecture with geometrical and topological techniques. Gaining an understanding of how to modify plant morphology, through molecular biology and breeding, aided by a mathematical perspective, is critical to improving agriculture, and the monitoring of ecosystems is vital to modeling a future with fewer natural resources. In this white paper, we begin with an overview in quantifying the form of plants and mathematical models of patterning in plants. We then explore the fundamental challenges that remain unanswered concerning plant morphology, from the barriers preventing the prediction of phenotype from genotype to modeling the movement of leaves in air streams. We end with a discussion concerning the education of plant morphology synthesizing biological and mathematical approaches and ways to facilitate research advances through outreach, cross-disciplinary training, and open science. Unleashing the potential of geometric and topological approaches in the plant sciences promises to transform our understanding of both plants and mathematics.

  12. Morphological Plant Modeling: Unleashing Geometric and Topological Potential within the Plant Sciences.

    Science.gov (United States)

    Bucksch, Alexander; Atta-Boateng, Acheampong; Azihou, Akomian F; Battogtokh, Dorjsuren; Baumgartner, Aly; Binder, Brad M; Braybrook, Siobhan A; Chang, Cynthia; Coneva, Viktoirya; DeWitt, Thomas J; Fletcher, Alexander G; Gehan, Malia A; Diaz-Martinez, Diego Hernan; Hong, Lilan; Iyer-Pascuzzi, Anjali S; Klein, Laura L; Leiboff, Samuel; Li, Mao; Lynch, Jonathan P; Maizel, Alexis; Maloof, Julin N; Markelz, R J Cody; Martinez, Ciera C; Miller, Laura A; Mio, Washington; Palubicki, Wojtek; Poorter, Hendrik; Pradal, Christophe; Price, Charles A; Puttonen, Eetu; Reese, John B; Rellán-Álvarez, Rubén; Spalding, Edgar P; Sparks, Erin E; Topp, Christopher N; Williams, Joseph H; Chitwood, Daniel H

    2017-01-01

    The geometries and topologies of leaves, flowers, roots, shoots, and their arrangements have fascinated plant biologists and mathematicians alike. As such, plant morphology is inherently mathematical in that it describes plant form and architecture with geometrical and topological techniques. Gaining an understanding of how to modify plant morphology, through molecular biology and breeding, aided by a mathematical perspective, is critical to improving agriculture, and the monitoring of ecosystems is vital to modeling a future with fewer natural resources. In this white paper, we begin with an overview in quantifying the form of plants and mathematical models of patterning in plants. We then explore the fundamental challenges that remain unanswered concerning plant morphology, from the barriers preventing the prediction of phenotype from genotype to modeling the movement of leaves in air streams. We end with a discussion concerning the education of plant morphology synthesizing biological and mathematical approaches and ways to facilitate research advances through outreach, cross-disciplinary training, and open science. Unleashing the potential of geometric and topological approaches in the plant sciences promises to transform our understanding of both plants and mathematics.

  13. Role Playing Research before Dungeons and Dragons

    DEFF Research Database (Denmark)

    Lieberoth, Andreas

    of Dungeons and Dragons the hobby community quickly took up this more serious mantle as well. Looking to a few unfortunate cases, and the obvious psychological power of role playing experience, many came to believe that role playing can have a profound psychological impact, but few evidence based studies have...... the effects of roleplaying – long before LARP and Dungeons and Dragons....

  14. Hydraulic behaviour of the floating wave energy converter Wave Dragon

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The objective of the project is to establish a scale 1:4.5 test model of the floating offshore wave energy converter - Wave Dragon - for testing at 5 m water depth in the Inlet Nissum Bredning. The test model will be equipped with an existing diameter 340 mm model turbine plus additional outlet tubes simulating the resistance from 1 - 16 turbines. The model will be designed to stay afloat even with a total loss of air pressure in the open bottom buoyancy chambers. The test series will primarily focus on measurements of hydraulic response, forces in the mooring system and overtopping quantities. Also data such as head, rotational speed and power production from the turbine will be monitored during the whole test period. The project will verify the effect of the pressured air buoyancy system, which cannot be scaled correctly in laboratory scale models. The test results will allow for an evaluation of the Wave Dragon power production as a function of sea state and freeboard height, in order to calibrate the existing WD-power simulation software. The model can be utilized for further testing of turbine regulation and stress and strain in the structure, establishing the necessary knowledge base for deploying a full-scale demonstration plant. This CD-ROM contains various videos, reports, notes, conference papers and Power Point presentations on the making of the wave energy converter Wave Dragon. (BA)

  15. Geometric Modelling by Discrete Surface Patches Based on Geometric Partial Differential Equations%几何偏微分方程和离散曲面设计

    Institute of Scientific and Technical Information of China (English)

    徐国良; 潘青

    2005-01-01

    We construct discrete three- and four-sided surface patches with specified C0 or C1 boundary conditions, using several geometric intrinsic curvature driven flows. These flow equations are solved numerically based on discretizations of the involved differential-geometry operators, which are derived from parametric approximations. The constructed surface patches satisfy certain geometric partial differential equations, and therefore have desirable shape. These patches are assembled together for constructing complicated geometric models for shape design. Multi-resolution representations of the models are achieved using repeated subdivision and evolution.%使用若干个几何本质的曲率驱动的偏微分方程来构造符合指定C0或C1边界条件的三边曲面片和四边曲面片,这些方程的数值解由所涉及的微分几何算子的离散化来得到,微分几何算子的离散化则源于参数逼近.所构造的曲面片满足某些特定的几何偏微分方程,故具有理想的形状,将这些曲面片组装起来便构造出复杂的几何模型.通过反复的子分和演化,得到几何模型的多尺度表示.

  16. Modifying Geometric-Optical Bidirectional Reflectance Model for Direct Inversion of Forest Canopy Leaf Area Index

    Directory of Open Access Journals (Sweden)

    Congrong Li

    2015-08-01

    Full Text Available Forest canopy leaf area index (LAI inversion based on remote sensing data is an important method to obtain LAI. Currently, the most widely-used model to achieve forest canopy structure parameters is the Li-Strahler geometric-optical bidirectional reflectance model, by considering the effect of crown shape and mutual shadowing, which is referred to as the GOMS model. However, it is difficult to retrieve LAI through the GOMS model directly because LAI is not a fundamental parameter of the model. In this study, a gap probability model was used to obtain the relationship between the canopy structure parameter nR2 and LAI. Thus, LAI was introduced into the GOMS model as an independent variable by replacing nR2 The modified GOMS (MGOMS model was validated by application to Dayekou in the Heihe River Basin of China. The LAI retrieved using the MGOMS model with optical multi-angle remote sensing data, high spatial resolution images and field-measured data was in good agreement with the field-measured LAI, with an R-square (R2 of 0.64, and an RMSE of 0.67. The results demonstrate that the MGOMS model obtained by replacing the canopy structure parameter nR2 of the GOMS model with LAI can be used to invert LAI directly and precisely.

  17. Solving a class of geometric programming problems by an efficient dynamic model

    Science.gov (United States)

    Nazemi, Alireza; Sharifi, Elahe

    2013-03-01

    In this paper, a neural network model is constructed on the basis of the duality theory, optimization theory, convex analysis theory, Lyapunov stability theory and LaSalle invariance principle to solve geometric programming (GP) problems. The main idea is to convert the GP problem into an equivalent convex optimization problem. A neural network model is then constructed for solving the obtained convex programming problem. By employing Lyapunov function approach, it is also shown that the proposed neural network model is stable in the sense of Lyapunov and it is globally convergent to an exact optimal solution of the original problem. The simulation results also show that the proposed neural network is feasible and efficient.

  18. A theoretical and computational setting for a geometrically nonlinear gradient damage modelling framework

    Science.gov (United States)

    Nedjar, B.

    The present work deals with the extension to the geometrically nonlinear case of recently proposed ideas on elastic- and elastoplastic-damage modelling frameworks within the infinitesimal theory. The particularity of these models is that the damage part of the modelling involves the gradient of damage quantity which, together with the equations of motion, are ensuing from a new formulation of the principle of virtual power. It is shown how the thermodynamics of irreversible processes is crucial in the characterization of the dissipative phenomena and in setting the convenient forms for the constitutive relations. On the numerical side, we discuss the problem of numerically integrating these equations and the implementation within the context of the finite element method is described in detail. And finally, we present a set of representative numerical simulations to illustrate the effectiveness of the proposed framework.

  19. Quasi-Topological Gauged Sigma Models, The Geometric Langlands Program, And Knots

    CERN Document Server

    Tan, Meng-Chwan

    2011-01-01

    We construct and study a closed, two-dimensional, quasi-topological (0,2) gauged sigma model with target space a smooth G-manifold, where G is any compact and connected Lie group. When the target space is a flag manifold of simple G, and the gauge group is a Cartan subgroup thereof, the perturbative model describes, purely physically, the recently formulated mathematical theory of "Twisted Chiral Differential Operators". This paves the way, via a generalized T-duality, for a natural physical interpretation of the geometric Langlands correspondence for simply-connected, simple, complex Lie groups. In particular, the Hecke eigensheaves and Hecke operators can be described in terms of the correlation functions of certain operators that underlie the infinite-dimensional chiral algebra of the flag manifold model. Nevertheless, nonperturbative worldsheet twisted-instantons can, in some situations, trivialize the chiral algebra completely. This leads to a spontaneous breaking of supersymmetry whilst implying certain...

  20. The Nuclear Shape Phase Transitions Studied within the Geometric Collective Model

    Directory of Open Access Journals (Sweden)

    Khalaf A. M.

    2013-04-01

    Full Text Available In the framework of the Geometric Collective Model (GCM, quantum phase transition between spherical and deformed shapes of doubly even nuclei are investigated. The validity of the model is examined for the case of lanthanide chains Nd / Sm and actinide chains Th / U. The parameters of the model were obtained by performing a computer simulated search program in order to obtain minimum root mean square deviations be- tween the calculated and the experimental excitation energies. Calculated potential en- ergy surfaces (PES’s describing all deformation effects of each nucleus are extracted. Our systematic studies on lanthanide and actinide chains have revealed a shape transi- tion from spherical vibrator to axially deformed rotor when moving from the lighter to the heavier isotopes.

  1. A Simple Geometrical Model for Calculation of the Effective Emissivity in Blackbody Cylindrical Cavities

    Science.gov (United States)

    De Lucas, Javier

    2015-03-01

    A simple geometrical model for calculating the effective emissivity in blackbody cylindrical cavities has been developed. The back ray tracing technique and the Monte Carlo method have been employed, making use of a suitable set of coordinates and auxiliary planes. In these planes, the trajectories of individual photons in the successive reflections between the cavity points are followed in detail. The theoretical model is implemented by using simple numerical tools, programmed in Microsoft Visual Basic for Application and Excel. The algorithm is applied to isothermal and non-isothermal diffuse cylindrical cavities with a lid; however, the basic geometrical structure can be generalized to a cylindro-conical shape and specular reflection. Additionally, the numerical algorithm and the program source code can be used, with minor changes, for determining the distribution of the cavity points, where photon absorption takes place. This distribution could be applied to the study of the influence of thermal gradients on the effective emissivity profiles, for example. Validation is performed by analyzing the convergence of the Monte Carlo method as a function of the number of trials and by comparison with published results of different authors.

  2. Dual geometric worm algorithm for two-dimensional discrete classical lattice models

    Science.gov (United States)

    Hitchcock, Peter; Sørensen, Erik S.; Alet, Fabien

    2004-07-01

    We present a dual geometrical worm algorithm for two-dimensional Ising models. The existence of such dual algorithms was first pointed out by Prokof’ev and Svistunov [N. Prokof’ev and B. Svistunov, Phys. Rev. Lett. 87, 160601 (2001)]. The algorithm is defined on the dual lattice and is formulated in terms of bond variables and can therefore be generalized to other two-dimensional models that can be formulated in terms of bond variables. We also discuss two related algorithms formulated on the direct lattice, applicable in any dimension. These latter algorithms turn out to be less efficient but of considerable intrinsic interest. We show how such algorithms quite generally can be “directed” by minimizing the probability for the worms to erase themselves. Explicit proofs of detailed balance are given for all the algorithms. In terms of computational efficiency the dual geometrical worm algorithm is comparable to well known cluster algorithms such as the Swendsen-Wang and Wolff algorithms, however, it is quite different in structure and allows for a very simple and efficient implementation. The dual algorithm also allows for a very elegant way of calculating the domain wall free energy.

  3. Systematic Geometric Error Modeling for Workspace Volumetric Calibration of a 5-axis Turbine Blade Grinding Machine

    Institute of Scientific and Technical Information of China (English)

    Abdul Wahid Khan; Chen Wuyi

    2010-01-01

    A systematic geometric model has been presented for calibration of a newly designed 5-axis turbine blade grinding machine.This machine is designed to serve a specific purpose to attain high accuracy and high efficiency grinding of turbine blades by eliminating the hand grinding process.Although its topology is RPPPR (P:prismatic;R:rotary),its design is quite distinct from the competitive machine tools.As error quantification is the only way to investigate,maintain and improve its accuracy,calibration is recommended for its performance assessment and acceptance testing.Systematic geometric error modeling technique is implemented and 52 position dependent and position independent errors are identified while considering the machine as five rigid bodies by eliminating the set-up errors ofworkpiece and cutting tool.39 of them are found to have influential errors and are accommodated for finding the resultant effect between the cutting tool and the workpiece in workspace volume.Rigid body kinematics techniques and homogenous transformation matrices are used for error synthesis.

  4. Understanding geometric instabilities in thin films via a multi-layer model.

    Science.gov (United States)

    Lejeune, Emma; Javili, Ali; Linder, Christian

    2016-01-21

    When a thin stiff film adhered to a compliant substrate is subject to compressive stresses, the film will experience a geometric instability and buckle out of plane. For high film/substrate stiffness ratios with relatively low levels of strain, the primary mode of instability will either be wrinkling or buckling delamination depending on the material and geometric properties of the system. Previous works approach these systems by treating the film and substrate as homogenous layers, either consistently perfectly attached, or perfectly unattached at interfacial flaws. However, this approach neglects systems where the film and substrate are uniformly weakly attached or where interfacial layers due to surface modifications in either the film or substrate are present. Here we demonstrate a method for accounting for these additional thin surface layers via an analytical solution verified by numerical results. The main outcome of this work is an improved understanding of how these layers influence global behavior. We demonstrate the utility of our model with applications ranging from buckling based metrology in ultrathin films, to an improved understanding of the formation of a novel surface in carbon nanotube bio-interface films. Moving forward, this model can be used to interpret experimental results, particularly for systems which deviate from traditional behavior, and aid in the evaluation and design of future film/substrate systems.

  5. Three-Dimensional Geometrical Modelling of Wild Boar Head by Reverse Engineering Technology

    Institute of Scientific and Technical Information of China (English)

    Liang Xu; Min-xu Lin; Jian-qiao Li; Zhao-liang Wang; B. Chirende

    2008-01-01

    In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough."The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional (3D) point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is -0.431 mm. The max curvature of the ridge on the neb of the head is 0.187 mm-1, and the max and rain Gauss curvatures on the surface are 0.008 mm-2 and -0.002 mm-2. These geometrical information are the essential parameters for biomimetics study of the ridger.

  6. Growing Random Geometric Graph Models of Super-linear Scaling Law

    CERN Document Server

    Zhang, Jiang

    2012-01-01

    Recent researches on complex systems highlighted the so-called super-linear growth phenomenon. As the system size $P$ measured as population in cities or active users in online communities increases, the total activities $X$ measured as GDP or number of new patents, crimes in cities generated by these people also increases but in a faster rate. This accelerating growth phenomenon can be well described by a super-linear power law $X \\propto P^{\\gamma}$($\\gamma>1$). However, the explanation on this phenomenon is still lack. In this paper, we propose a modeling framework called growing random geometric models to explain the super-linear relationship. A growing network is constructed on an abstract geometric space. The new coming node can only survive if it just locates on an appropriate place in the space where other nodes exist, then new edges are connected with the adjacent nodes whose number is determined by the density of existing nodes. Thus the total number of edges can grow with the number of nodes in a f...

  7. Outliers and Extremes: Dragon-Kings or Dragon-Fools?

    Science.gov (United States)

    Schertzer, D. J.; Tchiguirinskaia, I.; Lovejoy, S.

    2012-12-01

    Geophysics seems full of monsters like Victor Hugo's Court of Miracles and monstrous extremes have been statistically considered as outliers with respect to more normal events. However, a characteristic magnitude separating abnormal events from normal ones would be at odd with the generic scaling behaviour of nonlinear systems, contrary to "fat tailed" probability distributions and self-organized criticality. More precisely, it can be shown [1] how the apparent monsters could be mere manifestations of a singular measure mishandled as a regular measure. Monstrous fluctuations are the rule, not outliers and they are more frequent than usually thought up to the point that (theoretical) statistical moments can easily be infinite. The empirical estimates of the latter are erratic and diverge with sample size. The corresponding physics is that intense small scale events cannot be smoothed out by upscaling. However, based on a few examples, it has also been argued [2] that one should consider "genuine" outliers of fat tailed distributions so monstrous that they can be called "dragon-kings". We critically analyse these arguments, e.g. finite sample size and statistical estimates of the largest events, multifractal phase transition vs. more classical phase transition. We emphasize the fact that dragon-kings are not needed in order that the largest events become predictable. This is rather reminiscent of the Feast of Fools picturesquely described by Victor Hugo. [1] D. Schertzer, I. Tchiguirinskaia, S. Lovejoy et P. Hubert (2010): No monsters, no miracles: in nonlinear sciences hydrology is not an outlier! Hydrological Sciences Journal, 55 (6) 965 - 979. [2] D. Sornette (2009): Dragon-Kings, Black Swans and the Prediction of Crises. International Journal of Terraspace Science and Engineering 1(3), 1-17.

  8. New geometric design consistency model based on operating speed profiles for road safety evaluation.

    Science.gov (United States)

    Camacho-Torregrosa, Francisco J; Pérez-Zuriaga, Ana M; Campoy-Ungría, J Manuel; García-García, Alfredo

    2013-12-01

    To assist in the on-going effort to reduce road fatalities as much as possible, this paper presents a new methodology to evaluate road safety in both the design and redesign stages of two-lane rural highways. This methodology is based on the analysis of road geometric design consistency, a value which will be a surrogate measure of the safety level of the two-lane rural road segment. The consistency model presented in this paper is based on the consideration of continuous operating speed profiles. The models used for their construction were obtained by using an innovative GPS-data collection method that is based on continuous operating speed profiles recorded from individual drivers. This new methodology allowed the researchers to observe the actual behavior of drivers and to develop more accurate operating speed models than was previously possible with spot-speed data collection, thereby enabling a more accurate approximation to the real phenomenon and thus a better consistency measurement. Operating speed profiles were built for 33 Spanish two-lane rural road segments, and several consistency measurements based on the global and local operating speed were checked. The final consistency model takes into account not only the global dispersion of the operating speed, but also some indexes that consider both local speed decelerations and speeds over posted speeds as well. For the development of the consistency model, the crash frequency for each study site was considered, which allowed estimating the number of crashes on a road segment by means of the calculation of its geometric design consistency. Consequently, the presented consistency evaluation method is a promising innovative tool that can be used as a surrogate measure to estimate the safety of a road segment.

  9. Design of Wideband MIMO Car-to-Car Channel Models Based on the Geometrical Street Scattering Model

    Directory of Open Access Journals (Sweden)

    Nurilla Avazov

    2012-01-01

    Full Text Available We propose a wideband multiple-input multiple-output (MIMO car-to-car (C2C channel model based on the geometrical street scattering model. Starting from the geometrical model, a MIMO reference channel model is derived under the assumption of single-bounce scattering in line-of-sight (LOS and non-LOS (NLOS propagation environments. The proposed channel model assumes an infinite number of scatterers, which are uniformly distributed in two rectangular areas located on both sides of the street. Analytical solutions are presented for the space-time-frequency cross-correlation function (STF-CCF, the two-dimensional (2D space CCF, the time-frequency CCF (TF-CCF, the temporal autocorrelation function (ACF, and the frequency correlation function (FCF. An efficient sum-of-cisoids (SOCs channel simulator is derived from the reference model. It is shown that the temporal ACF and the FCF of the SOC channel simulator fit very well to the corresponding correlation functions of the reference model. To validate the proposed channel model, the mean Doppler shift and the Doppler spread of the reference model have been matched to real-world measurement data. The comparison results demonstrate an excellent agreement between theory and measurements, which confirms the validity of the derived reference model. The proposed geometry-based channel simulator allows us to study the effect of nearby street scatterers on the performance of C2C communication systems.

  10. Ion-biomolecule collisions studied within the independent atom model including geometric screening corrections

    Science.gov (United States)

    Lüdde, H. J.; Achenbach, A.; Kalkbrenner, T.; Jankowiak, H. C.; Kirchner, T.

    2016-05-01

    A recently introduced model to account for geometric screening corrections in an independent-atom-model description of ion-molecule collisions is applied to proton collisions from amino acids and DNA and RNA nucleobases. The correction coefficients are obtained from using a pixel counting method (PCM) for the exact calculation of the effective cross sectional area that emerges when the molecular cross section is pictured as a structure of (overlapping) atomic cross sections. This structure varies with the relative orientation of the molecule with respect to the projectile beam direction and, accordingly, orientation-independent total cross sections are obtained from averaging the pixel count over many orientations. We present net capture and net ionization cross sections over wide ranges of impact energy and analyze the strength of the screening effect by comparing the PCM results with Bragg additivity rule cross sections and with experimental data where available. Work supported by NSERC, Canada.

  11. Mean-field dynamic criticality and geometric transition in the Gaussian core model

    Science.gov (United States)

    Coslovich, Daniele; Ikeda, Atsushi; Miyazaki, Kunimasa

    2016-04-01

    We use molecular dynamics simulations to investigate dynamic heterogeneities and the potential energy landscape of the Gaussian core model (GCM). Despite the nearly Gaussian statistics of particles' displacements, the GCM exhibits giant dynamic heterogeneities close to the dynamic transition temperature. The divergence of the four-point susceptibility is quantitatively well described by the inhomogeneous version of the mode-coupling theory. Furthermore, the potential energy landscape of the GCM is characterized by large energy barriers, as expected from the lack of activated, hopping dynamics, and display features compatible with a geometric transition. These observations demonstrate that all major features of mean-field dynamic criticality can be observed in a physically sound, three-dimensional model.

  12. A 5G Hybrid Channel Model Considering Rays and Geometric Stochastic Propagation Graph

    DEFF Research Database (Denmark)

    Steinböck, Gerhard; Karstensen, Anders; Kyösti, Pekka

    2016-01-01

    We consider a ray-tracing tool, in particular the METIS map based model for deterministic simulation of the channel impulse response. The ray-tracing tool is extended by adding a geometric stochastic propagation graph to model additional stochastic paths and the dense multipath components observed...... in measurements. The computational complexity of raytracing typically prohibits the inclusion of the dense multipath component or limits it to the early part of the impulse response. Due to computational reasons and for lack of detailed information is the description of the environment for ray-tracing often very...... simplistic, e.g. plain walls and thus neglecting the structures on the building facades, window frames, window sills, etc. Thus in measurements there are often additional components observed that are not captured by these simplistic ray-tracing implementations. In this contribution we introduce a flexible...

  13. Modeling Philippine Stock Exchange Composite Index Using Weighted Geometric Brownian Motion Forecasts

    Directory of Open Access Journals (Sweden)

    Gayo Willy

    2016-01-01

    Full Text Available Philippine Stock Exchange Composite Index (PSEi is the main stock index of the Philippine Stock Exchange (PSE. PSEi is computed using a weighted mean of the top 30 publicly traded companies in the Philippines, called component stocks. It provides a single value by which the performance of the Philippine stock market is measured. Unfortunately, these weights, which may vary for every trading day, are not disclosed by the PSE. In this paper, we propose a model of forecasting the PSEi by estimating the weights based on historical data and forecasting each component stock using Monte Carlo simulation based on a Geometric Brownian Motion (GBM assumption. The model performance is evaluated and its forecast compared is with the results using a direct GBM forecast of PSEi over different forecast periods. Results showed that the forecasts using WGBM will yield smaller error compared to direct GBM forecast of PSEi.

  14. Unified optical distortion correction method for imaging systems using a concise geometrical transformation model

    Science.gov (United States)

    Chang, Shengqian; Liu, Siqi; Yuan, Fei; Zheng, Zhenrong

    2017-01-01

    Since optical distortion has been a big trouble for various kinds of imaging systems, finding a simple correction method with wide applications is of significant importance. In this paper, we propose a unified and simple correction method, performing well for both photographic and projective imaging systems. The basic idea is regarding the optical distortion as geometrical deformation between the object and image, without considering the specific features of an optical system. First of all, a calibration template is employed to establish the geometrical transformation model (GTM) for the distortion of a built optical system. Two alternative algorithms are given to estimate the GTM in algebraic form. The computation is very simple because no intrinsic parameters of the optical system are needed to establish the GTM. Besides, the errors introduced by the fabricating and assembling process can be eliminated. Then, the corrected image of the photographic system or the pre-distorted image of the projective systems can be obtained accordingly utilizing the GTM. Experiments are conducted to demonstrate the effectiveness of our method with wide applications.

  15. Modeling Geometric-Temporal Context With Directional Pyramid Co-Occurrence for Action Recognition.

    Science.gov (United States)

    Yuan, Chunfeng; Li, Xi; Hu, Weiming; Ling, Haibin; Maybank, Stephen J

    2014-02-01

    In this paper, we present a new geometric-temporal representation for visual action recognition based on local spatio-temporal features. First, we propose a modified covariance descriptor under the log-Euclidean Riemannian metric to represent the spatio-temporal cuboids detected in the video sequences. Compared with previously proposed covariance descriptors, our descriptor can be measured and clustered in Euclidian space. Second, to capture the geometric-temporal contextual information, we construct a directional pyramid co-occurrence matrix (DPCM) to describe the spatio-temporal distribution of the vector-quantized local feature descriptors extracted from a video. DPCM characterizes the co-occurrence statistics of local features as well as the spatio-temporal positional relationships among the concurrent features. These statistics provide strong descriptive power for action recognition. To use DPCM for action recognition, we propose a directional pyramid co-occurrence matching kernel to measure the similarity of videos. The proposed method achieves the state-of-the-art performance and improves on the recognition performance of the bag-of-visual-words (BOVWs) models by a large margin on six public data sets. For example, on the KTH data set, it achieves 98.78% accuracy while the BOVW approach only achieves 88.06%. On both Weizmann and UCF CIL data sets, the highest possible accuracy of 100% is achieved.

  16. Comparison of geometrical shock dynamics and kinematic models for shock-wave propagation

    Science.gov (United States)

    Ridoux, J.; Lardjane, N.; Monasse, L.; Coulouvrat, F.

    2017-09-01

    Geometrical shock dynamics (GSD) is a simplified model for nonlinear shock-wave propagation, based on the decomposition of the shock front into elementary ray tubes. Assuming small changes in the ray tube area, and neglecting the effect of the post-shock flow, a simple relation linking the local curvature and velocity of the front, known as the A{-}M rule, is obtained. More recently, a new simplified model, referred to as the kinematic model, was proposed. This model is obtained by combining the three-dimensional Euler equations and the Rankine-Hugoniot relations at the front, which leads to an equation for the normal variation of the shock Mach number at the wave front. In the same way as GSD, the kinematic model is closed by neglecting the post-shock flow effects. Although each model's approach is different, we prove their structural equivalence: the kinematic model can be rewritten under the form of GSD with a specific A{-}M relation. Both models are then compared through a wide variety of examples including experimental data or Eulerian simulation results when available. Attention is drawn to the simple cases of compression ramps and diffraction over convex corners. The analysis is completed by the more complex cases of the diffraction over a cylinder, a sphere, a mound, and a trough.

  17. Improved Quality Prediction Model for Multistage Machining Process Based on Geometric Constraint Equation

    Institute of Scientific and Technical Information of China (English)

    ZHU Limin; HE Gaiyun; SONG Zhanjie

    2016-01-01

    Product variation reduction is critical to improve process efficiency and product quality, especially for multistage machining process (MMP). However, due to the variation accumulation and propagation, it becomes quite difficult to predict and reduce product variation for MMP. While the method of statistical process control can be used to control product quality, it is used mainly to monitor the process change rather than to analyze the cause of product variation. In this paper, based on a differential description of the contact kinematics of locators and part surfaces, and the geometric constraints equation defined by the locating scheme, an improved analytical variation propagation model for MMP is presented. In which the influence of both locator position and machining error on part quality is considered while, in traditional model, it usually focuses on datum error and fixture error. Coordinate transformation theory is used to reflect the generation and transmission laws of error in the establishment of the model. The concept of deviation matrix is heavily applied to establish an explicit mapping between the geometric deviation of part and the process error sources. In each machining stage, the part deviation is formulized as three separated components corresponding to three different kinds of error sources, which can be further applied to fault identification and design optimization for complicated machining process. An example part for MMP is given out to validate the effectiveness of the methodology. The experiment results show that the model prediction and the actual measurement match well. This paper provides a method to predict part deviation under the influence of fixture error, datum error and machining error, and it enriches the way of quality prediction for MMP.

  18. The generalization of a class of impulse stochastic control models of a geometric Brownian motion

    Institute of Scientific and Technical Information of China (English)

    LIU XiaoPeng; LIU KunHui

    2009-01-01

    Recently, international academic circles advanced a class of new stochastic control models of a geometric Brownian motion which is an important kind of impulse control models whose cost structure is different from the others before, and it has a broad applying background and important theoretical significance in financial control and management of investment. This paper generalizes substantially the above stochastic control models under quite extensive conditions and describes the models more exactly under more normal theoretical system of stochastic process. By establishing a set of proper variational equations and proving the existence of its solution, and applying the means of stochastic analysis, this paper proves that the generalized stochastic control models have optimal controls.Meanwhile, we also analyze the structure of optimal controls carefully. Besides, we study the solution function of variational equations in a relatively deep-going way, which constitutes the value function of control models to some extent. Because the analysis methods of this paper are greatly different from those of original reference, this paper possesses considerable originality to some extent. In addition,this paper gives the strict proof to the part of original reference which is not fairly well-knit in analyses,and makes analyses and discussions of the model have the exactitude of mathematical sense.

  19. Towards Automatic Validation and Healing of Citygml Models for Geometric and Semantic Consistency

    Science.gov (United States)

    Alam, N.; Wagner, D.; Wewetzer, M.; von Falkenhausen, J.; Coors, V.; Pries, M.

    2013-09-01

    A steadily growing number of application fields for large 3D city models have emerged in recent years. Like in many other domains, data quality is recognized as a key factor for successful business. Quality management is mandatory in the production chain nowadays. Automated domain-specific tools are widely used for validation of business-critical data but still common standards defining correct geometric modeling are not precise enough to define a sound base for data validation of 3D city models. Although the workflow for 3D city models is well-established from data acquisition to processing, analysis and visualization, quality management is not yet a standard during this workflow. Processing data sets with unclear specification leads to erroneous results and application defects. We show that this problem persists even if data are standard compliant. Validation results of real-world city models are presented to demonstrate the potential of the approach. A tool to repair the errors detected during the validation process is under development; first results are presented and discussed. The goal is to heal defects of the models automatically and export a corrected CityGML model.

  20. GEOMETRIC CONTEXT AND ORIENTATION MAP COMBINATION FOR INDOOR CORRIDOR MODELING USING A SINGLE IMAGE

    Directory of Open Access Journals (Sweden)

    A. B. Jahromi

    2016-06-01

    Full Text Available Since people spend most of their time indoors, their indoor activities and related issues in health, security and energy consumption have to be understood. Hence, gathering and representing spatial information of indoor spaces in form of 3D models become very important. Considering the available data gathering techniques with respect to the sensors cost and data processing time, single images proved to be one of the reliable sources. Many of the current single image based indoor space modeling methods are defining the scene as a single box primitive. This domain-specific knowledge is usually not applicable in various cases where multiple corridors are joined at one scene. Here, we addressed this issue by hypothesizing-verifying multiple box primitives which represents the indoor corridor layout. Middle-level perceptual organization is the foundation of the proposed method, which relies on finding corridor layout boundaries using both detected line segments and virtual rays created by orthogonal vanishing points. Due to the presence of objects, shadows and occlusions, a comprehensive interpretation of the edge relations is often concealed. This necessitates the utilization of virtual rays to create a physically valid layout hypothesis. Many of the former methods used Orientation Map or Geometric Context to evaluate their proposed layout hypotheses. Orientation map is a map that reveals the local belief of region orientations computed from line segments, and in a segmented image geometric context uses color, texture, edge, and vanishing point cues to estimate the likelihood of each possible label for all super-pixels. Here, the created layout hypotheses are evaluated by an objective function which considers the fusion of orientation map and geometric context with respect to the horizontal viewing angle at each image pixel. Finally, the best indoor corridor layout hypothesis which gets the highest score from the scoring function will be selected

  1. Proximate Analysis of Dragon Fruit (Hylecereus polyhizus

    Directory of Open Access Journals (Sweden)

    Ruzainah A. Jaafar

    2009-01-01

    Full Text Available Problem statement: Dragon fruit (Hylecereus polyhizus is well known for the rich nutrient contents and it is commercially available worldwide for improving many health problems. Several studies show the proximity value of red pitaya fruits but the nutrient composition of the stem has not been extensively studied. Approach: This study was carried out to measure the proximate analysis of moisture content, water activity, ash, crude protein, crude fat, crude fiber, glucose and ascorbic acids content in premature and mature of dragon fruit. The dried powder was produced from the stem of dragon fruit and the proximate analysis of dragon fruit stem was compared between freeze drying process and drying oven process. Results: Results of this study showed that 96% moisture; 0.270 g of protein; 0.552 g L-1 glucose and 132.95 mg L-1 ascorbic acid of dragon fruit stem found higher than the fruit flesh of the dragon fruit. Conclusion: The premature stem had higher values than the mature stem of the dragon fruit which may helpful in preventing the risk factors of certain diseases.

  2. How not to train your dragon: a case of a Komodo dragon bite.

    Science.gov (United States)

    Borek, Heather A; Charlton, Nathan P

    2015-06-01

    Komodo dragons (Varanus komodoensis) are the world's largest lizards, known for killing prey that exceed their body mass. Reports of bites to humans in the popular press suggest high degrees of morbidity and mortality. Reports in the medical literature are lacking. We describe the case of a zookeeper who was bitten by a Komodo dragon, with a resultant mallet finger. We further discuss the various potential mechanisms of Komodo dragon lethality, including sepsis and venom deposition theories that are useful in guiding management.

  3. Bronze Dragons and Phoenix Table

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The table is one of the oldest kinds of furniture in China.Most, however, haven’t survived as they were made ofbamboo or wood, The discovery of this bronze table gives usa chance to see a real object from the Warring States Periodfor the first time. This bronze table was unearthed from the tomb of a kingof the Zhongshan Kingdom during the Warring States Periodat today’s Pingshan County, Hebei Province. The stand isformed from four two-winged dragons and four phoenixes

  4. 3D geometrical modelling of post-foliation deformations in metamorphic terrains (Syros, Cyclades, Greece)

    Science.gov (United States)

    Philippon, Mélody; Le Carlier de Veslud, Christian; Gueydan, Frédéric; Brun, Jean-Pierre; Caumon, Guillaume

    2015-09-01

    Superposed to ductile syn-metamorphic deformations, post-foliation deformations affect metamorphic units during their exhumation. Understanding the role of such deformations in the structuration of metamorphic units is key for understanding the tectonic evolution of convergence zones. We characterize post-foliations deformations using 3D modelling which is a first-order tool to describe complex geological structures, but a challenging task where based only on surface data. We propose a modelling procedure that combines fast draft models (interpolation of orientation data), with more complex ones where the structural context is better understood (implicit modelling), allowing us to build a 3D geometrical model of Syros Island blueschists (Cyclades), based on field data. With our approach, the 3D model is able to capture the complex present-day geometry of the island, mainly controlled by the superposition of three types of post-metamorphic deformations affecting the original metamorphic pile: i) a top-to-South ramp-flat extensional system that dominates the overall island structure, ii) large-scale folding of the metamorphic units associated with ramp-flat extensional system, and iii) steeply-dipping normal faults trending dominantly NNW-SSE and EW. The 3D surfaces produced by this method match outcrop data, are geologically consistent, and provide reasonable estimates of geological structures in poorly constrained areas.

  5. Effects of geometric head model perturbations on the EEG forward and inverse problems.

    Science.gov (United States)

    von Ellenrieder, Nicolás; Muravchik, Carlos H; Nehorai, Arye

    2006-03-01

    We study the effect of geometric head model perturbations on the electroencephalography (EEG) forward and inverse problems. Small magnitude perturbations of the shape of the head could represent uncertainties in the head model due to errors on images or techniques used to construct the model. They could also represent small scale details of the shape of the surfaces not described in a deterministic model, such as the sulci and fissures of the cortical layer. We perform a first-order perturbation analysis, using a meshless method for computing the sensitivity of the solution of the forward problem to the geometry of the head model. The effect on the forward problem solution is treated as noise in the EEG measurements and the Cramér-Rao bound is computed to quantify the effect on the inverse problem performance. Our results show that, for a dipolar source, the effect of the perturbations on the inverse problem performance is under the level of the uncertainties due to the spontaneous brain activity. Thus, the results suggest that an extremely detailed model of the head may be unnecessary when solving the EEG inverse problem.

  6. Universal geometric error modeling of the CNC machine tools based on the screw theory

    Science.gov (United States)

    Tian, Wenjie; He, Baiyan; Huang, Tian

    2011-05-01

    The methods to improve the precision of the CNC (Computerized Numerical Control) machine tools can be classified into two categories: error prevention and error compensation. Error prevention is to improve the precision via high accuracy in manufacturing and assembly. Error compensation is to analyze the source errors that affect on the machining error, to establish the error model and to reach the ideal position and orientation by modifying the trajectory in real time. Error modeling is the key to compensation, so the error modeling method is of great significance. Many researchers have focused on this topic, and proposed many methods, but we can hardly describe the 6-dimensional configuration error of the machine tools. In this paper, the universal geometric error model of CNC machine tools is obtained utilizing screw theory. The 6-dimensional error vector is expressed with a twist, and the error vector transforms between different frames with the adjoint transformation matrix. This model can describe the overall position and orientation errors of the tool relative to the workpiece entirely. It provides the mathematic model for compensation, and also provides a guideline in the manufacture, assembly and precision synthesis of the machine tools.

  7. 复合 Poisson-Geometric 过程风险模型推广%Improvement with compound Poisson-Geometric process risk model

    Institute of Scientific and Technical Information of China (English)

    王永茂; 李杰

    2013-01-01

      针对经典风险模型中 Poisson 过程均值必须等于方差这一局限,将其推广到复合 Poisson-Geometric 过程,并将保费收取次数看作是一个 Poisson 过程,且每次收到的保费看作是一个随机变量且服从指数分布,得到了对古典风险模型的一个推广。解释了做出这种推广的实际意义,经过推算,得到了调节系数以及破产概率的表达式,进而得到了模型对应的 Lundeberg 不等式。%The Poisson process in a classical risk model has some limitations, i.e., the mean must be equal to its variance. This paper extends the Poisson process into a compound Poisson-Geometric process. The times of premium collection are regarded as a Poisson process, and the premium collected is considered as a random variable following exponential distribution. Therefore, the study extends a classical risk model. This paper will explain the significance of the improvement. With the calculation, the expressions of adjustment coefficient and ruin probability are obtained. Furthermore, the Lundeberg inequality for this risk model is derived.

  8. Lower Bounds for Sorted Geometric Queries in the I/O Model

    DEFF Research Database (Denmark)

    Afshani, Peyman; Zeh, Norbert

    2012-01-01

    problems is to construct a small data structure that can answer queries efficiently. We study sorted geometric query problems in the I/O model and prove that, when limited to linear space, the naïve approach of sorting the elements in S in the desired output order from scratch is the best possible....... This is highly relevant in an I/O context because storing a massive data set in a superlinear-space data structure is often infeasible. We also prove that answering queries using I/Os requires space, where N is the input size, B is the block size, and M is the size of the main memory. This bound is unlikely...

  9. Geometrical mutual information at the tricritical point of the two-dimensional Blume-Capel model

    CERN Document Server

    Mandal, Ipsita; Melko, Roger G

    2016-01-01

    The spin-1 classical Blume-Capel model on a square lattice is known to exhibit a finite-temperature phase transition described by the tricritical Ising CFT in 1+1 space-time dimensions. This phase transition can be accessed with classical Monte Carlo simulations, which, via a replica-trick calculation, can be used to study the shape-dependence of the classical R\\'enyi entropies for a torus divided into two cylinders. From the second R\\'enyi entropy, we calculate the Geometrical Mutual Information (GMI) introduced by St\\'ephan et. al. [Phys. Rev. Lett. 112, 127204 (2014)] and use it to extract a numerical estimate for the value of the central charge near the tricritical point. By comparing to the known CFT result, $c=7/10$, we demonstrate how this type of GMI calculation can be used to estimate the position of the tricritical point in the phase diagram.

  10. A model for the origin and properties of flicker-induced geometric phosphenes.

    Directory of Open Access Journals (Sweden)

    Michael Rule

    2011-09-01

    Full Text Available We present a model for flicker phosphenes, the spontaneous appearance of geometric patterns in the visual field when a subject is exposed to diffuse flickering light. We suggest that the phenomenon results from interaction of cortical lateral inhibition with resonant periodic stimuli. We find that the best temporal frequency for eliciting phosphenes is a multiple of intrinsic (damped oscillatory rhythms in the cortex. We show how both the quantitative and qualitative aspects of the patterns change with frequency of stimulation and provide an explanation for these differences. We use Floquet theory combined with the theory of pattern formation to derive the parameter regimes where the phosphenes occur. We use symmetric bifurcation theory to show why low frequency flicker should produce hexagonal patterns while high frequency produces pinwheels, targets, and spirals.

  11. Parametric geometric model and shape optimization of an underwater glider with blended-wing-body

    Science.gov (United States)

    Sun, Chunya; Song, Baowei; Wang, Peng

    2015-11-01

    Underwater glider, as a new kind of autonomous underwater vehicles, has many merits such as long-range, extended-duration and low costs. The shape of underwater glider is an important factor in determining the hydrodynamic efficiency. In this paper, a high lift to drag ratio configuration, the Blended-Wing-Body (BWB), is used to design a small civilian under water glider. In the parametric geometric model of the BWB underwater glider, the planform is defined with Bezier curve and linear line, and the section is defined with symmetrical airfoil NACA 0012. Computational investigations are carried out to study the hydrodynamic performance of the glider using the commercial Computational Fluid Dynamics (CFD) code Fluent. The Kriging-based genetic algorithm, called Efficient Global Optimization (EGO), is applied to hydrodynamic design optimization. The result demonstrates that the BWB underwater glider has excellent hydrodynamic performance, and the lift to drag ratio of initial design is increased by 7% in the EGO process.

  12. Geometric deformable model driven by CoCRFs: application to optical coherence tomography.

    Science.gov (United States)

    Tsechpenakis, Gabriel; Lujan, Brandon; Martinez, Oscar; Gregori, Giovanni; Rosenfeld, Philip J

    2008-01-01

    We present a geometric deformable model driven by dynamically updated probability fields. The shape is defined with the signed distance function, and the internal (smoothness) energy consists of a C1 continuity constraint, a shape prior, and a term that forces the zero-level of the shape distance function towards a connected form. The image probability fields are estimated by our collaborative Conditional Random Field (CoCRF), which is updated during the evolution in an active learning manner: it infers class posteriors in pixels or regions with feature ambiguities by assessing the joint appearance of neighboring sites and using the classification confidence. We apply our method to Optical Coherence Tomography fundus images for the segmentation of geographic atrophies in dry age-related macular degeneration of the human eye.

  13. Computer-aided geometric modeling of the human eye and orbit.

    Science.gov (United States)

    Parshall, R F

    1991-01-01

    The author advocates, as a long-term development agenda for the profession, a shift in the working methods of medical illustrators from a two-dimensional image processing mode to a computer-aided design and drafting (CADD) mode. Existing CADD technology, which can make short work of the complex graphic construction problems of anatomical visualization, performs virtually all of its manipulations through systematic exercise of graphic geometry which illustrators tend to reduce to an intuitive, almost vestigial supplement to 2D image processing methods. The primary barrier to the immediate use of CADD is a lack of geometric database materials on anatomical component systems of the body. An on-going experimental project in modeling the human eye and orbit, utilizing a Silicon Graphics Iris workstation and Control Data Corporation's Integrated Computerized Engineering and Manufacturing (ICEM) software, exemplifies the preparatory work needed to create such database materials.

  14. Geometric Generalisation of Surrogate Model-Based Optimisation to Combinatorial and Program Spaces

    Directory of Open Access Journals (Sweden)

    Yong-Hyuk Kim

    2014-01-01

    Full Text Available Surrogate models (SMs can profitably be employed, often in conjunction with evolutionary algorithms, in optimisation in which it is expensive to test candidate solutions. The spatial intuition behind SMs makes them naturally suited to continuous problems, and the only combinatorial problems that have been previously addressed are those with solutions that can be encoded as integer vectors. We show how radial basis functions can provide a generalised SM for combinatorial problems which have a geometric solution representation, through the conversion of that representation to a different metric space. This approach allows an SM to be cast in a natural way for the problem at hand, without ad hoc adaptation to a specific representation. We test this adaptation process on problems involving binary strings, permutations, and tree-based genetic programs.

  15. Powerful elderly characters in video games: Flemeth of Dragon Age

    Directory of Open Access Journals (Sweden)

    Elisabeta Toma

    2015-12-01

    Full Text Available As games are becoming an increasingly popular medium in various demographic and professional strata, scholars are discussing their content and how they shape society. However, despite an increase in gender analysis of video games, little has been written about orienting games towards an elderly audience, or game representations of aging and older persons. Games specifically designed for older persons are focused on improving cognitive functions, starting from the assumption that the elderly are in need of special games in order to repair age-related deficits. This repair-focused design philosophy comes at the expense of pursuing a broader understanding of quality of life and non-programmatic entertainment. Games-for-fun that also explicitly target the elderly as an audience are almost invisible. In this article we turn our attention to a powerful elderly feminine character in an AAA game designed for entertainment without a serious mission, namely Flemeth from Dragon Age. We discuss how the game depicts and models older characters: What repertoire of portraits has Flemeth as an old woman, in the Dragon Age games? How does Flemeth contribute to an enlarged repertoire of portrayals of old women in video games? We conclude that Flemeth’s gender and age displays in Dragon Age do not impoverish her portrayal but, on the contrary, turn her into a powerful and complex character, thus offering a model for game design to represent and invite older players.

  16. A Geometrically Exact Model for Externally Loaded Concentric-Tube Continuum Robots

    Science.gov (United States)

    Rucker, D. Caleb; Jones, Bryan A.; Webster, Robert J.

    2011-01-01

    Continuum robots, which are composed of multiple concentric, precurved elastic tubes, can provide dexterity at diameters equivalent to standard surgical needles. Recent mechanics-based models of these “active cannulas” are able to accurately describe the curve of the robot in free space, given the preformed tube curves and the linear and angular positions of the tube bases. However, in practical applications, where the active cannula must interact with its environment or apply controlled forces, a model that accounts for deformation under external loading is required. In this paper, we apply geometrically exact rod theory to produce a forward kinematic model that accurately describes large deflections due to a general collection of externally applied point and/or distributed wrench loads. This model accommodates arbitrarily many tubes, with each having a general preshaped curve. It also describes the independent torsional deformation of the individual tubes. Experimental results are provided for both point and distributed loads. Average tip error under load was 2.91 mm (1.5%–3% of total robot length), which is similar to the accuracy of existing free-space models. PMID:21566688

  17. Particle-Based Geometric and Mechanical Modelling of Woven Technical Textiles and Reinforcements for Composites

    Science.gov (United States)

    Samadi, Reza

    Technical textiles are increasingly being engineered and used in challenging applications, in areas such as safety, biomedical devices, architecture and others, where they must meet stringent demands including excellent and predictable load bearing capabilities. They also form the bases for one of the most widespread group of composite materials, fibre reinforced polymer-matrix composites (PMCs), which comprise materials made of stiff and strong fibres generally available in textile form and selected for their structural potential, combined with a polymer matrix that gives parts their shape. Manufacturing processes for PMCs and technical textiles, as well as parts and advanced textile structures must be engineered, ideally through simulation, and therefore diverse properties of the textiles, textile reinforcements and PMC materials must be available for predictive simulation. Knowing the detailed geometry of technical textiles is essential to predicting accurately the processing and performance properties of textiles and PMC parts. In turn, the geometry taken by a textile or a reinforcement textile is linked in an intricate manner to its constitutive behaviour. This thesis proposes, investigates and validates a general numerical tool for the integrated and comprehensive analysis of textile geometry and constitutive behaviour as required toward engineering applications featuring technical textiles and textile reinforcements. The tool shall be general with regards to the textiles modelled and the loading cases applied. Specifically, the work aims at fulfilling the following objectives: 1) developing and implementing dedicated simulation software for modelling textiles subjected to various load cases; 2) providing, through simulation, geometric descriptions for different textiles subjected to different load cases namely compaction, relaxation and shear; 3) predicting the constitutive behaviour of the textiles undergoing said load cases; 4) identifying parameters

  18. A new geometric-based model to accurately estimate arm and leg inertial estimates.

    Science.gov (United States)

    Wicke, Jason; Dumas, Geneviève A

    2014-06-03

    Segment estimates of mass, center of mass and moment of inertia are required input parameters to analyze the forces and moments acting across the joints. The objectives of this study were to propose a new geometric model for limb segments, to evaluate it against criterion values obtained from DXA, and to compare its performance to five other popular models. Twenty five female and 24 male college students participated in the study. For the criterion measures, the participants underwent a whole body DXA scan, and estimates for segment mass, center of mass location, and moment of inertia (frontal plane) were directly computed from the DXA mass units. For the new model, the volume was determined from two standing frontal and sagittal photographs. Each segment was modeled as a stack of slices, the sections of which were ellipses if they are not adjoining another segment and sectioned ellipses if they were adjoining another segment (e.g. upper arm and trunk). Length of axes of the ellipses was obtained from the photographs. In addition, a sex-specific, non-uniform density function was developed for each segment. A series of anthropometric measurements were also taken by directly following the definitions provided of the different body segment models tested, and the same parameters determined for each model. Comparison of models showed that estimates from the new model were consistently closer to the DXA criterion than those from the other models, with an error of less than 5% for mass and moment of inertia and less than about 6% for center of mass location. Copyright © 2014. Published by Elsevier Ltd.

  19. A Novel Geometrical Height Gain Model for Line-of-Sight Urban Micro Cells Below 6 GHz

    DEFF Research Database (Denmark)

    Rodriguez, Ignacio; Nguyen, Huan Cong; Sørensen, Troels Bundgaard;

    2016-01-01

    This paper presents a novel height gain model applicable to line-of-sight urban micro cell scenarios and frequencies below 6 GHz. The model is knife-edge diffraction-based, and it is founded on simple geometrical and physical relationships. Typical system level simulator scenario parameters...

  20. Investigation of the pore geometrical structure of nanofibrous membranes using statistical modelling

    Science.gov (United States)

    Khanmohammadi Khoshui, Sedigheh; Hosseini Ravandi, Seyed Abdolkarim; Bagherzadeh, Roohollah; Saberi, Zahra; Karimi, Mohammad

    2016-10-01

    The pore size and its distribution are the two main geometrical properties of nanofibrous membranes in various applications such as filtration and tissue engineering. In the current paper, a modified approach (model) is suggested to predict pore size and its distribution in nanofibrous membranes. In the present work, inter-fibre pores are considered as polygons arising from the fibre contacts. For the first time, these polygons are assumed to be three-, four- and five-gons, and the hydraulic radius of the pores was obtained instead of the equal radius. The pore size of multilayer mats was provided with a different insight. The pore mean size and its distribution were obtained by statistical methods. In order to validate the model, polycaprolactone (PCL) nanofibrous mats were electrospun, and the mean pore size and its distribution were measured using porosimetry. It was found that the probability distribution function of the pore size in both single and multi nanofibrous layers was the Gamma function with two parameters. The effect of the fibre width and porosity raise was increasing of mean pore diameter of multilayer networks. A comparison between the modified model and previous models revealed that the modified approach was more realistic.

  1. A Geometrical-Based Model for Cochannel Interference Analysis and Capacity Estimation of CDMA Cellular Systems

    Directory of Open Access Journals (Sweden)

    Baltzis KonstantinosB

    2008-01-01

    Full Text Available Abstract A common assumption in cellular communications is the circular-cell approximation. In this paper, an alternative analysis based on the hexagonal shape of the cells is presented. A geometrical-based stochastic model is proposed to describe the angle of arrival of the interfering signals in the reverse link of a cellular system. Explicit closed form expressions are derived, and simulations performed exhibit the characteristics and validate the accuracy of the proposed model. Applications in the capacity estimation of WCDMA cellular networks are presented. Dependence of system capacity of the sectorization of the cells and the base station antenna radiation pattern is explored. Comparisons with data in literature validate the accuracy of the proposed model. The degree of error of the hexagonal and the circular-cell approaches has been investigated indicating the validity of the proposed model. Results have also shown that, in many cases, the two approaches give similar results when the radius of the circle equals to the hexagon inradius. A brief discussion on how the proposed technique may be applied to broadband access networks is finally made.

  2. Numerical Methods for a Multicomponent Two-Phase Interface Model with Geometric Mean Influence Parameters

    KAUST Repository

    Kou, Jisheng

    2015-07-16

    In this paper, we consider an interface model for multicomponent two-phase fluids with geometric mean influence parameters, which is popularly used to model and predict surface tension in practical applications. For this model, there are two major challenges in theoretical analysis and numerical simulation: the first one is that the influence parameter matrix is not positive definite; the second one is the complicated structure of the energy function, which requires us to find out a physically consistent treatment. To overcome these two challenging problems, we reduce the formulation of the energy function by employing a linear transformation and a weighted molar density, and furthermore, we propose a local minimum grand potential energy condition to establish the relation between the weighted molar density and mixture compositions. From this, we prove the existence of the solution under proper conditions and prove the maximum principle of the weighted molar density. For numerical simulation, we propose a modified Newton\\'s method for solving this nonlinear model and analyze its properties; we also analyze a finite element method with a physical-based adaptive mesh-refinement technique. Numerical examples are tested to verify the theoretical results and the efficiency of the proposed methods.

  3. A Geometrical-Based Model for Cochannel Interference Analysis and Capacity Estimation of CDMA Cellular Systems

    Directory of Open Access Journals (Sweden)

    Konstantinos B. Baltzis

    2008-10-01

    Full Text Available A common assumption in cellular communications is the circular-cell approximation. In this paper, an alternative analysis based on the hexagonal shape of the cells is presented. A geometrical-based stochastic model is proposed to describe the angle of arrival of the interfering signals in the reverse link of a cellular system. Explicit closed form expressions are derived, and simulations performed exhibit the characteristics and validate the accuracy of the proposed model. Applications in the capacity estimation of WCDMA cellular networks are presented. Dependence of system capacity of the sectorization of the cells and the base station antenna radiation pattern is explored. Comparisons with data in literature validate the accuracy of the proposed model. The degree of error of the hexagonal and the circular-cell approaches has been investigated indicating the validity of the proposed model. Results have also shown that, in many cases, the two approaches give similar results when the radius of the circle equals to the hexagon inradius. A brief discussion on how the proposed technique may be applied to broadband access networks is finally made.

  4. Prototype testing of the wave energy converter wave dragon

    Energy Technology Data Exchange (ETDEWEB)

    Kofoed, Jens Peter; Frigaard, Peter [Hydraulics and Coastal Engineering Laboratory, Department of Civil Engineering, Aalborg University, Sohngaardsholmsvej 57, Aalborg 9000 (Denmark); Friis-Madsen, Erik [Loewenmark F.R.I., Copenhagen (Denmark); Soerensen, Hans Chr. [SPOK, Copenhagen (Denmark)

    2006-02-01

    The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power. In the period from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57x27m wide and 237tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world's first offshore wave energy converter. The prototype is fully equipped with hydro turbines and automatic control systems, and is instrumented in order to monitor power production, wave climate, forces in mooring lines, stresses in the structure and movements of the Wave Dragon. In the period May 2003 to January 2005 an extensive measuring program has been carried out, establishing the background for optimal design of the structure and regulation of the power take off system. Planning for deployment of a 4MW power production unit in the Atlantic by 2007 is in progress. (author)

  5. Left-Right Symmetric Model from Geometrical Formulation of Gauge Theory in $M_{4} \\times Z_{2} \\times Z_{2}$

    CERN Document Server

    Konisi, G; Mäki, Z; Nakahara, M

    1999-01-01

    The left-right symmetric model (LRSM) with gauge group $SU(2)_{L} \\times SU(2)_{R} \\times U(1)_{B-L}$ is reconstructed from the geometric formulation of gauge theory in $M_4 \\times Z_2 \\times Z_2$ where $M_4$ is the four-dimensional Minkowski space and $Z_2 \\times Z_2$ the discrete space with four points. The geometrical structure of this model becomes clearer compared with other works based on noncommutative geometry. As a result, the Yukawa coupling terms and the Higgs potential are derived in more restricted forms than in the standard LRSM.

  6. Dungeons & Dragons: The gamers are revolting! [symposium

    Directory of Open Access Journals (Sweden)

    Rebecca Bryant

    2009-03-01

    Full Text Available The negative response by players to corporate changes to the rule systems governing Dungeons & Dragons suggests that tabletop RPGs have more in common with fan fiction than with computer games.

  7. Geometrical custom modeling of human cornea in vivo and its use for the diagnosis of corneal ectasia.

    Directory of Open Access Journals (Sweden)

    Francisco Cavas-Martínez

    Full Text Available AIM: To establish a new procedure for 3D geometric reconstruction of the human cornea to obtain a solid model that represents a personalized and in vivo morphology of both the anterior and posterior corneal surfaces. This model is later analyzed to obtain geometric variables enabling the characterization of the corneal geometry and establishing a new clinical diagnostic criterion in order to distinguish between healthy corneas and corneas with keratoconus. METHOD: The method for the geometric reconstruction of the cornea consists of the following steps: capture and preprocessing of the spatial point clouds provided by the Sirius topographer that represent both anterior and posterior corneal surfaces, reconstruction of the corneal geometric surfaces and generation of the solid model. Later, geometric variables are extracted from the model obtained and statistically analyzed to detect deformations of the cornea. RESULTS: The variables that achieved the best results in the diagnosis of keratoconus were anterior corneal surface area (ROC area: 0.847, p<0.000, std. error: 0.038, 95% CI: 0.777 to 0.925, posterior corneal surface area (ROC area: 0.807, p<0.000, std. error: 0.042, 95% CI: 0,726 to 0,889, anterior apex deviation (ROC area: 0.735, p<0.000, std. error: 0.053, 95% CI: 0.630 to 0.840 and posterior apex deviation (ROC area: 0.891, p<0.000, std. error: 0.039, 95% CI: 0.8146 to 0.9672. CONCLUSION: Geometric modeling enables accurate characterization of the human cornea. Also, from a clinical point of view, the procedure described has established a new approach for the study of eye-related diseases.

  8. A geometric analysis of fast-slow models for stochastic gene expression.

    Science.gov (United States)

    Popović, Nikola; Marr, Carsten; Swain, Peter S

    2016-01-01

    Stochastic models for gene expression frequently exhibit dynamics on several different scales. One potential time-scale separation is caused by significant differences in the lifetimes of mRNA and protein; the ratio of the two degradation rates gives a natural small parameter in the resulting chemical master equation, allowing for the application of perturbation techniques. Here, we develop a framework for the analysis of a family of 'fast-slow' models for gene expression that is based on geometric singular perturbation theory. We illustrate our approach by giving a complete characterisation of a standard two-stage model which assumes transcription, translation, and degradation to be first-order reactions. In particular, we present a systematic expansion procedure for the probability-generating function that can in principle be taken to any order in the perturbation parameter, allowing for an approximation of the corresponding propagator probabilities to that same order. For illustrative purposes, we perform this expansion explicitly to first order, both on the fast and the slow time-scales; then, we combine the resulting asymptotics into a composite fast-slow expansion that is uniformly valid in time. In the process, we extend, and prove rigorously, results previously obtained by Shahrezaei and Swain (Proc Natl Acad Sci USA 105(45):17256-17261, 2008) and Bokes et al. (J Math Biol 64(5):829-854, 2012; J Math Biol 65(3):493-520, 2012). We verify our asymptotics by numerical simulation, and we explore its practical applicability and the effects of a variation in the system parameters and the time-scale separation. Focussing on biologically relevant parameter regimes that induce translational bursting, as well as those in which mRNA is frequently transcribed, we find that the first-order correction can significantly improve the steady-state probability distribution. Similarly, in the time-dependent scenario, inclusion of the first-order fast asymptotics results in a

  9. A Geometric Computational Model for Calculation of Longwall Face Effect on Gate Roadways

    Science.gov (United States)

    Mohammadi, Hamid; Ebrahimi Farsangi, Mohammad Ali; Jalalifar, Hossein; Ahmadi, Ali Reza

    2016-01-01

    In this paper a geometric computational model (GCM) has been developed for calculating the effect of longwall face on the extension of excavation-damaged zone (EDZ) above the gate roadways (main and tail gates), considering the advance longwall mining method. In this model, the stability of gate roadways are investigated based on loading effects due to EDZ and caving zone (CZ) above the longwall face, which can extend the EDZ size. The structure of GCM depends on four important factors: (1) geomechanical properties of hanging wall, (2) dip and thickness of coal seam, (3) CZ characteristics, and (4) pillar width. The investigations demonstrated that the extension of EDZ is a function of pillar width. Considering the effect of pillar width, new mathematical relationships were presented to calculate the face influence coefficient and characteristics of extended EDZ. Furthermore, taking GCM into account, a computational algorithm for stability analysis of gate roadways was suggested. Validation was carried out through instrumentation and monitoring results of a longwall face at Parvade-2 coal mine in Tabas, Iran, demonstrating good agreement between the new model and measured results. Finally, a sensitivity analysis was carried out on the effect of pillar width, bearing capacity of support system and coal seam dip.

  10. Geometrical model for martensitic phase transitions: Understanding criticality and weak universality during microstructure growth

    Science.gov (United States)

    Torrents, Genís; Illa, Xavier; Vives, Eduard; Planes, Antoni

    2017-01-01

    A simple model for the growth of elongated domains (needle-like) during a martensitic phase transition is presented. The model is purely geometric and the only interactions are due to the sequentiality of the kinetic problem and to the excluded volume, since domains cannot retransform back to the original phase. Despite this very simple interaction, numerical simulations show that the final observed microstructure can be described as being a consequence of dipolar-like interactions. The model is analytically solved in 2D for the case in which two symmetry related domains can grow in the horizontal and vertical directions. It is remarkable that the solution is analytic both for a finite system of size L ×L and in the thermodynamic limit L →∞ , where the elongated domains become lines. Results prove the existence of criticality, i.e., that the domain sizes observed in the final microstructure show a power-law distribution characterized by a critical exponent. The exponent, nevertheless, depends on the relative probabilities of the different equivalent variants. The results provide a plausible explanation of the weak universality of the critical exponents measured during martensitic transformations in metallic alloys. Experimental exponents show a monotonous dependence with the number of equivalent variants that grow during the transition.

  11. The Rigorous Geometric Model of Satellite Laser Altimeter and Preliminarily Accuracy Validation

    Directory of Open Access Journals (Sweden)

    TANG Xinming

    2016-10-01

    Full Text Available It has been paid attention to improving the elevation accuracy of satellite stereo images aided by laser altimeter. The GF-7 satellite scheduled to launch in 2018 will be equipped with optical stereo cameras and a laser altimeter. ICESat (Ice, Cloud, and land Elevation Satellite with GLAS(Geo-science Laser Altimeter System is the first and still only laser altimeter satellite for earth observation until now. In this paper, the comprehensively analysis about the rigorous geometric model and accuracy analysis of laser altimeter is presented. The error induced by laser pointing aberration and mounting is proposed, and the data processing workflow of ICESat/GLAS from level 0 to level 2 is introduced. What's more, the geo-location accuracy between this paper and GLAS product is compared and the model is validated by the result that the accuracy based on the model is about 3 cm and 11 cm in the horizontal and vertical direction, respectively. The laser altimeter data loaded on the ZY3-02 satellite has been processed and validated preliminarily. The conclusion of this paper is valuable and can be viewed as reference for the subsequent domestic laser altimeter satellites.

  12. Advanced Spacecraft EM Modelling Based on Geometric Simplification Process and Multi-Methods Simulation

    Science.gov (United States)

    Leman, Samuel; Hoeppe, Frederic

    2016-05-01

    This paper is about the first results of a new generation of ElectroMagnetic (EM) methodology applied to spacecraft systems modelling in the low frequency range (system's dimensions are of the same order of magnitude as the wavelength).This innovative approach aims at implementing appropriate simplifications of the real system based on the identification of the dominant electrical and geometrical parameters driving the global EM behaviour. One rigorous but expensive simulation is performed to quantify the error generated by the use of simpler multi-models. If both the speed up of the simulation time and the quality of the EM response are satisfied, uncertainty simulation could be performed based on the simple models library implementing in a flexible and robust Kron's network formalism.This methodology is expected to open up new perspectives concerning fast parametric analysis, and deep understanding of systems behaviour. It will ensure the identification of main radiated and conducted coupling paths and the sensitive EM parameters in order to optimize the protections and to control the disturbance sources in spacecraft design phases.

  13. Generalised Geometrical CP Violation in a $T^{\\prime}$ Lepton Flavour Model

    CERN Document Server

    Girardi, Ivan; Petcov, S T; Spinrath, Martin

    2014-01-01

    We analyse the interplay of generalised CP transformations and the non-Abelian discrete group $T^{\\prime}$ and use the semi-direct product $G_f= T^{\\prime}\\rtimes H_{\\text{CP}}$, as family symmetry acting in the lepton sector. The family symmetry is shown to be spontaneously broken in a geometrical manner. In the resulting flavour model, naturally small Majorana neutrino masses for the light active neutrinos are obtained through the type I see-saw mechanism. The known masses of the charged leptons, lepton mixing angles and the two neutrino mass squared differences are reproduced by the model with a good accuracy. The model allows for two neutrino mass spectra with normal ordering (NO) and one with inverted ordering (IO). For each of the three spectra the absolute scale of neutrino masses is predicted with relatively small uncertainty. The value of the Dirac CP violation (CPV) phase $\\delta$ in the lepton mixing matrix is predicted to be $\\delta \\cong \\pi/2~{\\rm or}~ 3\\pi/2$. Thus, the CP violating effects in ...

  14. Diagnostics of circumstellar grains in geometric models I: structure and composition

    Science.gov (United States)

    Dawes, J. H. P.; Greaves, J. S.

    2017-01-01

    The spectral energy distribution (SED) of circumstellar dust has been extensively used to diagnose the sizes and compositions of dust grains. We show that variations of SED slope in the long wavelength (submillimetre to radio) regime can be used to diagnose the gross physical nature (and hence origins) of the dust, using simple geometric models that complement the use of detailed simulations. We consider two dust grain types: (i) clustered aggregates of smaller particles (monomers), and (ii) composite grains comprising ferrous inclusions within a silicate matrix. These types are intended to be analogous to fluffy cometary particles and fragments of compacted asteroids, respectively. Our results indicate that clusters of silicate grains produce a smooth SED, while composite grains with FeS inclusions produce an SED that has a pronounced drop at a wavelength an order of magnitude larger than the grain size, and is flatter at long wavelengths. As a test case, we compare the model predictions to flux measurements of the TW Hydrae disc. This SED shows a drop that only occurs in our models of compacted grains with inclusions. Since the TW Hya discs spans approximately 10-40 AU in radius, fluffy particles from comets were perhaps expected, as in the Sun's Kuiper belt.

  15. GEOMETRICAL MODELING OF 3D PATTERNS FOR TRADITIONAL INDIAN KUNDAN JEWELRY

    Directory of Open Access Journals (Sweden)

    GOEL VINEET KUMAR

    2011-07-01

    Full Text Available India is famous for its art and culture, which can be found in traditional handicrafts, carvings, potteries, as well as in Jewelry. The traditional Jewelry of India is what makes the Indian Jewelry so rich and unique in their manner. India has a rich tradition of gold ornamental designs and there are a number of styles of ornamentmaking in practice, each with its uniqueness, special forms and style. Our work is based on semantics; 3D patterns are created on the bases of parametric representation. This work aims to associate advantages unfolded by Computer Aided Design (CAD technology in developing traditional design patterns for Jewelry design andmanufacturing. The work also presents three dimensional (3D semantics used in Traditional Indian Kundan Jewelry with the help of mathematical modeling; to generate the traditional patterns.The goal will be achieved by devising mathematical models for various 3D semantics, for the modeling of Traditional Indian Kundan jewelry (TIKJ. Jewelry Add-In is developed for inventor using c++. Aim of this Jewelry add-in is to develop pattern of 3D geometrical shapes on 3D surface and for communication between Jewelry Add-In and Inventor.

  16. Wave Overtopping Characteristics of the Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    Simulation work has been used extensively with the Wave dragon and other overtopping devices to analyse the power production performance of them and to optimise the structural design and the control strategy. A time domain approach to this is well documented in Jakobsen & Frigaard 1999. Using...... measurements taken from the Wave Dragon Nissum Bredning prototype, some of the previous assumptions have been slightly modified and improved upon, so that the simulation method better represents the reality of what is occurring....

  17. Wave Overtopping Characteristics of the Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    Simulation work has been used extensively with the Wave dragon and other overtopping devices to analyse the power production performance of them and to optimise the structural design and the control strategy. A time domain approach to this is well documented in Jakobsen & Frigaard 1999. Using...... measurements taken from the Wave Dragon Nissum Bredning prototype, some of the previous assumptions have been slightly modified and improved upon, so that the simulation method better represents the reality of what is occurring....

  18. Wave Dragon. Test to evaluate hydraulic response. Report phase A

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, H.C.; Friis-Madsen, E.

    1999-02-01

    Danish Maritime Institute has in the spring 1998 built a model in scale 1:50 of the wave energy converter Wave Dragon. The scale model is based on calculations performed by the inventor Erik Friis-Madsen from the consultant Loewenmark F.R.I. The scale model is tested in the wave tank at Aalborg University, the Hydraulic and Coastal Engineering Laboratory. This report deals with the results from this test (phase A of the test program). The objective of the test series was to get a judgement of the viability of Wave Dragon in extreme sea conditions in the Danish part of the North Sea at a water depth of 30 meters. The test series had to document: The viability of the Wave Dragon in extreme sea conditions up to 100-year waves; the hydraulic response in 7 different sea conditions where forces and movements have been registered. The main findings are: Wave Dragon has the expected behavior, i.e. the converter is able to survive a 100-year storm; An adjustment of the pitch of the converter could improve the energy efficiency; The forces in the mooring system and the junction between wave reflectors and the platform are acceptable. The forces and the movements are registered at 7 different sea conditions. Video recording has been taken during the test. Five of the sea conditions correspond to 'normal' waves in which power will be produced. Two sea conditions correspond to extreme wave situations. The duration of the registration in each sea conditions was approximately 1/2 an hour, i.e. 3.5 hours in scale 1:1. The conclusion is: The planned test series to evaluate the energy performance can start up (phase B of the test program); The energy efficiency is expected to be improved by a slight modification in the geometry of the Wave Dragon. The modifications can include the geometry of the front and the stabilising wing at the rear end of the platform. Further on changes are possible in the stiffness of the junction between the wave reflectors and the platform and

  19. Finite element modelling of squirrel, guinea pig and rat skulls: using geometric morphometrics to assess sensitivity.

    Science.gov (United States)

    Cox, P G; Fagan, M J; Rayfield, E J; Jeffery, N

    2011-12-01

    Rodents are defined by a uniquely specialized dentition and a highly complex arrangement of jaw-closing muscles. Finite element analysis (FEA) is an ideal technique to investigate the biomechanical implications of these specializations, but it is essential to understand fully the degree of influence of the different input parameters of the FE model to have confidence in the model's predictions. This study evaluates the sensitivity of FE models of rodent crania to elastic properties of the materials, loading direction, and the location and orientation of the models' constraints. Three FE models were constructed of squirrel, guinea pig and rat skulls. Each was loaded to simulate biting on the incisors, and the first and the third molars, with the angle of the incisal bite varied over a range of 45°. The Young's moduli of the bone and teeth components were varied between limits defined by findings from our own and previously published tests of material properties. Geometric morphometrics (GMM) was used to analyse the resulting skull deformations. Bone stiffness was found to have the strongest influence on the results in all three rodents, followed by bite position, and then bite angle and muscle orientation. Tooth material properties were shown to have little effect on the deformation of the skull. The effect of bite position varied between species, with the mesiodistal position of the biting tooth being most important in squirrels and guinea pigs, whereas bilateral vs. unilateral biting had the greatest influence in rats. A GMM analysis of isolated incisor deformations showed that, for all rodents, bite angle is the most important parameter, followed by elastic properties of the tooth. The results here elucidate which input parameters are most important when defining the FE models, but also provide interesting glimpses of the biomechanical differences between the three skulls, which will be fully explored in future publications. © 2011 The Authors. Journal of

  20. Experiments with the Dragon Machine

    Energy Technology Data Exchange (ETDEWEB)

    R.E. Malenfant

    2005-08-12

    The basic characteristics of a self-sustaining chain reaction were demonstrated with the Chicago Pile in 1943, but it was not until early 1945 that sufficient enriched material became available to experimentally verify fast-neutron cross-sections and the kinetic characteristics of a nuclear chain reaction sustained with prompt neutrons alone. However, the demands of wartime and the rapid decline in effort following the cessation of hostilities often resulted in the failure to fully document the experiments or in the loss of documentation as personnel returned to civilian pursuits. When documented, the results were often highly classified. Even when eventually declassified, the data were often not approved for public release until years later.2 Even after declassification and approval for public release, the records are sometimes difficult to find. Through a fortuitous discovery, a set of handwritten notes by ''ORF July 1945'' entitled ''Dragon - Research with a Pulsed Fission Reactor'' was found by William L. Myers in an old storage safe at Pajarito Site of the Los Alamos National Laboratory3. Of course, ORF was identified as Otto R. Frisch. The document was attached to a page in a nondescript spiral bound notebook labeled ''494 Book'' that bore the signatures of Louis Slotin and P. Morrison. The notes also reference an ''Idea LS'' that can only be Louis Slotin. The discovery of the notes led to a search of Laboratory Archives, the negative files of the photo lab, and the Report Library for additional details of the experiments with the Dragon machine that were conducted between January and July 1945. The assembly machine and the experiments were carefully conceived and skillfully executed. The analyses--without the crutch of computers--display real insight into the characteristics of the nuclear chain reaction. The information presented here provides what is believed to be a complete

  1. 3D MI-DRAGON: new model for the reconstruction of US FDA drug- target network and theoretical-experimental studies of inhibitors of rasagiline derivatives for AChE.

    Science.gov (United States)

    Prado-Prado, Francisco; García-Mera, Xerardo; Escobar, Manuel; Alonso, Nerea; Caamaño, Olga; Yañez, Matilde; González-Díaz, Humberto

    2012-01-01

    The number of neurodegenerative diseases has been increasing in recent years. Many of the drug candidates to be used in the treatment of neurodegenerative diseases present specific 3D structural features. An important protein in this sense is the acetylcholinesterase (AChE), which is the target of many Alzheimer's dementia drugs. Consequently, the prediction of Drug-Protein Interactions (DPIs/nDPIs) between new drug candidates and specific 3D structure and targets is of major importance. To this end, we can use Quantitative Structure-Activity Relationships (QSAR) models to carry out a rational DPIs prediction. Unfortunately, many previous QSAR models developed to predict DPIs take into consideration only 2D structural information and codify the activity against only one target. To solve this problem we can develop some 3D multi-target QSAR (3D mt-QSAR) models. In this study, using the 3D MI-DRAGON technique, we have introduced a new predictor for DPIs based on two different well-known software. We have used the MARCH-INSIDE (MI) and DRAGON software to calculate 3D structural parameters for drugs and targets respectively. Both classes of 3D parameters were used as input to train Artificial Neuronal Network (ANN) algorithms using as benchmark dataset the complex network (CN) made up of all DPIs between US FDA approved drugs and their targets. The entire dataset was downloaded from the DrugBank database. The best 3D mt-QSAR predictor found was an ANN of Multi-Layer Perceptron-type (MLP) with profile MLP 37:37-24-1:1. This MLP classifies correctly 274 out of 321 DPIs (Sensitivity = 85.35%) and 1041 out of 1190 nDPIs (Specificity = 87.48%), corresponding to training Accuracy = 87.03%. We have validated the model with external predicting series with Sensitivity = 84.16% (542/644 DPIs; Specificity = 87.51% (2039/2330 nDPIs) and Accuracy = 86.78%. The new CNs of DPIs reconstructed from US FDA can be used to explore large DPI databases in order to discover both new drugs

  2. Geometric-Phase approach to macroscopic polarization in lattice fermion models

    Science.gov (United States)

    Ortiz, Gerardo; Martin, Richard M.; Ordejón, Pablo

    1996-03-01

    The Geometric-Phase approach is a convenient way to calculate changes in the macroscopic polarization of an insulating system, based on the concept that the integrated current is connected to the phase of the wavefunction of interacting electrons. The method has provided a powerful mathematical scheme to study dielectric phenomena in correlated systems. We have applied these ideas to a variety of strongly correlated lattice fermion models in one and two dimensions; in particular, the 3-band Hubbard model in Cu-O planes in the parent compounds of High-Temperature superconductors. We analyze the information contained in the phase when a quantum transition takes place as one parameter of the hamiltonian is adiabatically changed. Previous results assume a correlated insulator in zero macroscopic electric field. In presence of such a singular perturbation there is no stable ground state. We present a way to overcome this problem, the main idea of which consists in constraining the manifold where the electrons move, i.e., the configuration space of the N identical particles.

  3. Numerical analysis of bypass model geometrical parameters influence on pulsatile blood flow

    Directory of Open Access Journals (Sweden)

    Jonášová A.

    2011-06-01

    Full Text Available The present study is focused on the analysis of pulsatile blood flow in complete idealized 3D bypass models in dependence on three main geometrical parameters (stenosis degree, junction angle and diameter ratio. Assuming the blood to be an incompressible Newtonian fluid, the non-linear system of Navier-Stokes equations is integrated in time by a fully implicit second-order accurate fractional-step method. The space discretization is performed with the help of the cell-centred finite volume method formulated for unstructured tetrahedral grids. In order to model a realistic coronary blood flow, a time-dependent flow rate taken from corresponding literature is considered. For the analysis of obtained numerical results, special emphasis is placed on their comparison in the form of velocity isolines at several selected cross-sections during systolic and diastolic phases. The remainder of this paper is devoted to discussion of walls shear stress distribution and its oscillatory character described by the oscillatory shear index with regard to areas prone to development of intimal hyperplasia or to thrombus formation.

  4. Geometric-model-based segmentation of the prostate and surrounding structures for image-guided radiotherapy

    Science.gov (United States)

    Tang, Xiaoli; Jeong, Yongwon; Radke, Richard J.; Chen, George T. Y.

    2004-01-01

    We present a computer vision tool to improve the clinical outcome of patients undergoing radiation therapy for prostate cancer by improving irradiation technique. While intensity modulated radiotherapy (IMRT) allows one to irradiate a specific region in the body with high accuracy, it is still difficult to know exactly where to aim the radiation beam on every day of the 30~40 treatments that are necessary. This paper presents a geometric model-based technique to accurately segment the prostate and other surrounding structures in a daily serial CT image, compensating for daily motion and shape variation. We first acquire a collection of serial CT scans of patients undergoing external beam radiotherapy, and manual segmentation of the prostate and other nearby structures by radiation oncologists. Then we train shape and local appearance models for the structures of interest. When new images are available, an iterative algorithm is applied to locate the prostate and surrounding structures automatically. Our experimental results show that excellent matches can be given to the prostate and surrounding structure. Convergence is declared after 10 iterations. For 256 x 256 images, the mean distance between the hand-segmented contour and the automatically estimated contour is about 1.5 pixels (2.44 mm), with variance about 0.6 pixel (1.24 mm).

  5. A geometrical model for the Monte Carlo simulation of the TrueBeam linac

    CERN Document Server

    Rodriguez, Miguel; Fogliata, Antonella; Cozzi, Luca; Sauerwein, Wolfgang; Brualla, Lorenzo

    2015-01-01

    Monte Carlo (MC) simulation of linacs depends on the accurate geometrical description of the head. The geometry of the Varian TrueBeam linac is not available to researchers. Instead, the company distributes phase-space files (PSFs) of the flattening-filter-free (FFF) beams tallied upstream the jaws. Yet, MC simulations based on third party tallied PSFs are subject to limitations. We present an experimentally-based geometry developed for the simulation of the FFF beams of the TrueBeam linac. The upper part of the TrueBeam linac was modeled modifying the Clinac 2100 geometry. The most important modification is the replacement of the standard flattening filters by {\\it ad hoc} thin filters which were modeled by comparing dose measurements and simulations. The experimental dose profiles for the 6~MV and 10~MV FFF beams were obtained from the Varian Golden Data Set and from in-house measurements for radiation fields ranging from $3\\times3$ to $40\\times40$ cm$^2$. The same comparisons were done for dose profiles ob...

  6. Evolving nutritional strategies in the presence of competition: a geometric agent-based model.

    Directory of Open Access Journals (Sweden)

    Alistair M Senior

    2015-03-01

    Full Text Available Access to nutrients is a key factor governing development, reproduction and ultimately fitness. Within social groups, contest-competition can fundamentally affect nutrient access, potentially leading to reproductive asymmetry among individuals. Previously, agent-based models have been combined with the Geometric Framework of nutrition to provide insight into how nutrition and social interactions affect one another. Here, we expand this modelling approach by incorporating evolutionary algorithms to explore how contest-competition over nutrient acquisition might affect the evolution of animal nutritional strategies. Specifically, we model tolerance of nutrient excesses and deficits when ingesting nutritionally imbalanced foods, which we term 'nutritional latitude'; a higher degree of nutritional latitude constitutes a higher tolerance of nutritional excess and deficit. Our results indicate that a transition between two alternative strategies occurs at moderate to high levels of competition. When competition is low, individuals display a low level of nutritional latitude and regularly switch foods in search of an optimum. When food is scarce and contest-competition is intense, high nutritional latitude appears optimal, and individuals continue to consume an imbalanced food for longer periods before attempting to switch to an alternative. However, the relative balance of nutrients within available foods also strongly influences at what levels of competition, if any, transitions between these two strategies occur. Our models imply that competition combined with reproductive skew in social groups can play a role in the evolution of diet breadth. We discuss how the integration of agent-based, nutritional and evolutionary modelling may be applied in future studies to further understand the evolution of nutritional strategies across social and ecological contexts.

  7. Using Dragon Curves To Learn about Length and Area.

    Science.gov (United States)

    Smith, Lyle R.

    1999-01-01

    Utilizes dragon curves which are made with three tiles and can be used to create fascinating patterns to help students understand the concepts of length, area, and perimeter of regions as defined by dragon curves. (ASK)

  8. Little Dragon Two: An efficient Multivariate Public Key Cryptosystem

    Directory of Open Access Journals (Sweden)

    Rajesh P Singh

    2010-04-01

    Full Text Available In 1998 [8], Patarin proposed an efficient cryptosystem called Little Dragon which was a variant a variant of Matsumoto Imai cryptosystem C*. However Patarin latter found that Little Dragon cryptosystem is not secure [8], [3]. In this paper we propose a cryptosystem Little Dragon Two which is as efficient as Little Dragon cryptosystem but secure against all the known attacks. Like Little Dragon cryptosystem the public key of Little Dragon Two is mixed type that is quadratic in plaintext and cipher text variables. So the public key size of Little Dragon Two is equal to Little Dragon Cryptosystem. Ourpublic key algorithm is bijective and can be used for both encryption and signatures

  9. Flavonoids from artificially induced dragon's blood of Dracaena cambodiana.

    Science.gov (United States)

    Wang, Hui; Jiang, He-Mei; Li, Fei-Xiang; Chen, Hui-Qin; Liu, Wen-Chao; Ren, Shou-Zhong; Mei, Wen-Li; Dai, Hao-Fu

    2017-09-01

    Dragon's blood is a rare traditional medicine used in many countries. Because of its various therapeutic uses, its requirement is increasing dramatically, while formation of dragon's blood need at least several years, so many researchers tried to induce the formation of dragon's blood artificially, but the chemical constituents of artificially induced dragon's blood were rarely studied. In our research, twenty constituents, including three new ones, were isolated from artificially induced dragon's blood of Dracaena cambodiana, five of which are the same with those from natural dragon's blood. In addition, six compounds exhibited cytotoxic activities, and eleven compounds demonstrated antibacterial activities. Artificially induced dragon's blood is expected to be the substituent of natural dragon's blood. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Geometrical Bioelectrodynamics

    CERN Document Server

    Ivancevic, Vladimir G

    2008-01-01

    This paper proposes rigorous geometrical treatment of bioelectrodynamics, underpinning two fast-growing biomedical research fields: bioelectromagnetism, which deals with the ability of life to produce its own electromagnetism, and bioelectromagnetics, which deals with the effect on life from external electromagnetism. Keywords: Bioelectrodynamics, exterior geometrical machinery, Dirac-Feynman quantum electrodynamics, functional electrical stimulation

  11. Application of Geometric Moiré to the Analysis of Large Deformation in Three-dimensional Models

    Science.gov (United States)

    Cicinelli, V.; Pappalettere, C.; Sun, W. M.; Surace, L.

    The application of geometric moiré in large deformation of 3-D models is discussed. Different aspects of the method, such as mismatch technique and mechanical differentiation, are taken into consideration for the measurement. An application of the method is given to the cushion disk of an artificial knee joint in whose axis-symmetric cross section a cross specimen grating of 0.5mm pitch was replicated. The analysis shows the applicability of the geometric moiré, together with its various approaches, in the large deformation measurement giving the whole field quantitative definition.

  12. Aeroelastic simulation of multi-MW wind turbines using a free vortex model coupled to a geometrically exact beam model

    Science.gov (United States)

    Saverin, Joseph; Peukert, Juliane; Marten, David; Pechlivanoglou, George; Paschereit, Christian Oliver; Greenblatt, David

    2016-09-01

    The current paper investigates the aeroelastic modelling of large, flexible multi- MW wind turbine blades. Most current performance prediction tools make use of the Blade Element Momentum (BEM) model, based upon a number of simplifying assumptions that hold only under steady conditions. This is why a lifting line free vortex wake (LLFVW) algorithm is used here to accurately resolve unsteady wind turbine aerodynamics. A coupling to the structural analysis tool BeamDyn, based on geometrically exact beam theory, allows for time-resolved aeroelastic simulations with highly deflected blades including bend-twist, coupling. Predictions of blade loading and deformation for rigid and flexible blades are analysed with reference to different aerodynamic and structural approaches. The emergency shutdown procedure is chosen as an examplary design load case causing large deflections to place emphasis on the influence of structural coupling and demonstrate the necessity of high fidelity structural models.

  13. Transformation of a Foucault shadowgram into the geometrical model of a shear interferogram by means of isophotometry

    Science.gov (United States)

    Zhevlakov, A. P.; Zatsepina, M. E.; Kirillovskii, V. K.

    2014-06-01

    The principles of transformation of a Foucault shadowgram into a quantitative map of wave-front deformation based on creation of a system of isophotes are unveiled. The presented studies and their results prove that there is a high degree of correspondence between a Foucault shadowgram and the geometrical model of a shear interferogram with respect to displaying wave-front deformations.

  14. Characterization of dragon fruit (Hylocereus spp.) components with valorization potential

    OpenAIRE

    Liaotrakoon, Wijitra

    2013-01-01

    Dragon fruit (Hylocereus spp.), also known as pitaya or pitahaya, is increasingly gaining interest in many countries, including Thailand which is a country with a climate ideal for breeding different varieties of tropical and subtropical fruits in general, and dragon fruit more specifically. The benefits of dragon fruit for human health can be explained by its essential nutrients such as vitamins, minerals, complex carbohydrates, dietary fibres and antioxidants. Dragon fruit is also an essent...

  15. Men and Women Compete for the Dragon Crown

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    THE dragon is the symbol of China, and the Chinese consider themselves descendants of the dragon. From April 30 to May 5 in 1995, the First National Dragon Dance Tournament was held in the Summer Palace of Chinese cultural heritage. Twenty dragon dance teams convened in Beijing and a fierce display of strength and beauty unfolded. The most eyecatching performance was by the only female participants—the Zhengmingsi

  16. Is the Dragon a Suitable Symbol for China?

    Institute of Scientific and Technical Information of China (English)

    孙梦雨

    2007-01-01

    <正>Recently there has been a heated discussion on whether we should continue to use the dragon as the symbol for our China.Some claim that the dragon is no longer a suitable symbol for China. Whereas others don’t think so. A professor Wu in Shanghai who holds the view that the dragon is no good a symbol gives the following reasons.Firstly,the dragon is an evil

  17. Modeling of Surface Geometric Structure State After Integratedformed Milling and Finish Burnishing

    Science.gov (United States)

    Berczyński, Stefan; Grochała, Daniel; Grządziel, Zenon

    2017-06-01

    The article deals with computer-based modeling of burnishing a surface previously milled with a spherical cutter. This method of milling leaves traces, mainly asperities caused by the cutting crossfeed and cutter diameter. The burnishing process - surface plastic treatment - is accompanied by phenomena that take place right in the burnishing ball-milled surface contact zone. The authors present the method for preparing a finite element model and the methodology of tests for the assessment of height parameters of a surface geometrical structure (SGS). In the physical model the workpieces had a cuboidal shape and these dimensions: (width × height × length) 2×1×4.5 mm. As in the process of burnishing a cuboidal workpiece is affected by plastic deformations, the nonlinearities of the milled item were taken into account. The physical model of the process assumed that the burnishing ball would be rolled perpendicularly to milling cutter linear traces. The model tests included the application of three different burnishing forces: 250 N, 500 N and 1000 N. The process modeling featured the contact and pressing of a ball into the workpiece surface till the desired force was attained, then the burnishing ball was rolled along the surface section of 2 mm, and the burnishing force was gradually reduced till the ball left the contact zone. While rolling, the burnishing ball turned by a 23° angle. The cumulative diagrams depict plastic deformations of the modeled surfaces after milling and burnishing with defined force values. The roughness of idealized milled surface was calculated for the physical model under consideration, i.e. in an elementary section between profile peaks spaced at intervals of crossfeed passes, where the milling feed fwm = 0.5 mm. Also, asperities after burnishing were calculated for the same section. The differences of the obtained values fall below 20% of mean values recorded during empirical experiments. The adopted simplification in after

  18. Geometric phase and topology of elastic oscillations and vibrations in model systems: Harmonic oscillator and superlattice

    Directory of Open Access Journals (Sweden)

    P. A. Deymier

    2016-12-01

    Full Text Available We illustrate the concept of geometric phase in the case of two prototypical elastic systems, namely the one-dimensional harmonic oscillator and a one-dimensional binary superlattice. We demonstrate formally the relationship between the variation of the geometric phase in the spectral and wave number domains and the parallel transport of a vector field along paths on curved manifolds possessing helicoidal twists which exhibit non-conventional topology.

  19. Geometric phase and topology of elastic oscillations and vibrations in model systems: Harmonic oscillator and superlattice

    Science.gov (United States)

    Deymier, P. A.; Runge, K.; Vasseur, J. O.

    2016-12-01

    We illustrate the concept of geometric phase in the case of two prototypical elastic systems, namely the one-dimensional harmonic oscillator and a one-dimensional binary superlattice. We demonstrate formally the relationship between the variation of the geometric phase in the spectral and wave number domains and the parallel transport of a vector field along paths on curved manifolds possessing helicoidal twists which exhibit non-conventional topology.

  20. 具有AR(q)误差非线性回归模型的几何性质%Geometric Properties of AR(q) Nonlinear Regression Models

    Institute of Scientific and Technical Information of China (English)

    刘应安; 韦博成

    2004-01-01

    This paper is devoted to a study of geometric properties of AR(q) nonlinear regression models. We present geometric frameworks for regression parameter space and autoregression parameter space respectively based on the weighted inner product by fisher information matrix. Several geometric properties related to statistical curvatures are given for the models. The results of this paper extended the work of Bates & Watts(1980,1988) [1,2] and Seber & Wild(1989) [3].

  1. Method to geometrically personalize a detailed finite-element model of the spine.

    Science.gov (United States)

    Lalonde, Nadine Michèle; Petit, Yvan; Aubin, Carl-Eric; Wagnac, Eric; Arnoux, Pierre-Jean

    2013-07-01

    To date, developing geometrically personalized and detailed solid finite-element models (FEMs) of the spine remains a challenge, notably due to multiple articulations and complex geometries. To answer this problem, a methodology based on a free-form deformation technique (kriging) was developed to deform a detailed reference finite-element mesh of the spine (including discs and ligaments) to the patient-specific geometry of 10- and 82-year-old asymptomatic spines. Different kriging configurations were tested: with or without smoothing, and control points on or surrounding the entire mesh. Based on the results, it is recommended to use surrounding control points and smoothing. The mean node to surface distance between the deformed and target geometries was 0.3±1.1 mm. Most elements met the mesh quality criteria (95%) after deformation, without interference at the articular facets. The method's novelty lies in the deformation of the entire spine at once, as opposed to deforming each vertebra separately, with surrounding control points and smoothing. This enables the transformation of reference vertebrae and soft tissues to obtain complete and personalized FEMs of the spine with minimal postprocessing to optimize the mesh.

  2. Differential-geometric aspects of a nonholonomic Dirac mechanics: Lessons of a model quadratic in velocities

    Science.gov (United States)

    Pavlov, V. P.

    2014-03-01

    Faddeev and Vershik proposed the Hamiltonian and Lagrangian formulations of constrained mechanical systems that are invariant from the differential geometry standpoint. In both formulations, the description is based on a nondegenerate symplectic 2-form defined on a cotangent bundle T*Q (in the Hamiltonian formulation) or on a tangent bundle TQ (in the Lagrangian formulation), and constraints are sets of functions in involution on these manifolds. We demonstrate that this technique does not allow "invariantization" of the Dirac procedure of constraint "proliferation." We show this in an example of a typical quantum field model in which the original Lagrange function is a quadratic form in velocities with a degenerate coefficient matrix. We postulate that the initial phase space is a manifold where all arguments of the action functional including the Lagrange multipliers are defined. The Lagrange multipliers can then be naturally interpreted physically as velocities (in the Hamiltonian formulation) or momenta (in the Lagrangian formulation) related to "nonphysical" degrees of freedom. A quasisymplectic 2-form invariantly defined on such a manifold is degenerate. We propose new differential-geometric structures that allow formulating the Dirac procedure invariantly.

  3. GEOMETRIC COMPLEXITY ANALYSIS IN AN INTEGRATIVE TECHNOLOGY EVALUATION MODEL (ITEM FOR SELECTIVE LASER MELTING (SLM#

    Directory of Open Access Journals (Sweden)

    S. Merkt

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Selective laser melting (SLM is becoming an economically viable choice for manufacturing complex serial parts. This paper focuses on a geometric complexity analysis as part of the integrative technology evaluation model (ITEM presented here. In contrast to conventional evaluation methodologies, the ITEM considers interactions between product and process innovations generated by SLM. The evaluation of manufacturing processes that compete with SLM is the main goal of ITEM. The paper includes a complexity analysis of a test part from Festo AG. The paper closes with a discussion of how the expanded design freedom of SLM can be used to improve company operations, and how the complexity analysis presented here can be seen as a starting point for feature-based complexity analysis..

    AFRIKAANSE OPSOMMING: Selektiewe lasersmelting word geleidelik ’n gangbare ekonomiese keuse vir die vervaar-diging van opeenvolgende komplekse onderdele. Die navorsing is toegespits op die ontleding van meetkundige kompleksiteit as ’n gedeelte van ’n integrerende tegnologiese evalueringsmodel. Gemeet teen konvensionele evalueringsmodelle behandel die genoemde metode interaksies tussen produkte- en prosesinnovasies wat gegenereer word. Die navorsing behandel ’n kompleksiteitsontleding van ’n toetsonderdeel van die firma FESTO AG. Die resultaat toon hoe kompleksiteits-analise gebruik kan word as die vertrekpunt vir eienskapsgebaseerde analise.

  4. Phase diagram of the Kondo-Heisenberg model on honeycomb lattice with geometrical frustration

    Science.gov (United States)

    Li, Huan; Song, Hai-Feng; Liu, Yu

    2016-11-01

    We calculated the phase diagram of the Kondo-Heisenberg model on a two-dimensional honeycomb lattice with both nearest-neighbor and next-nearest-neighbor antiferromagnetic spin exchanges, to investigate the interplay between RKKY and Kondo interactions in the presence of magnetic frustration. Within a mean-field decoupling technology in slave-fermion representation, we derived the zero-temperature phase diagram as a function of Kondo coupling J k and frustration strength Q. The geometrical frustration can destroy the magnetic order, driving the original antiferromagnetic (AF) phase to non-magnetic valence bond solids (VBS). In addition, we found two distinct VBS. As J k is increased, a phase transition from AF to Kondo paramagnetic (KP) phase occurs, without the intermediate phase coexisting AF order with Kondo screening found in square lattice systems. In the KP phase, the enhancement of frustration weakens the Kondo screening effect, resulting in a phase transition from KP to VBS. We also found a process to recover the AF order from VBS by increasing J k in a wide range of frustration strength. Our work may provide predictions for future experimental observation of new processes of quantum phase transitions in frustrated heavy-fermion compounds.

  5. A population-based model to describe geometrical uncertainties in radiotherapy: applied to prostate cases

    Science.gov (United States)

    Budiarto, E.; Keijzer, M.; Storchi, P. R.; Hoogeman, M. S.; Bondar, L.; Mutanga, T. F.; de Boer, H. C. J.; Heemink, A. W.

    2011-02-01

    Local motions and deformations of organs between treatment fractions introduce geometrical uncertainties into radiotherapy. These uncertainties are generally taken into account in the treatment planning by enlarging the radiation target by a margin around the clinical target volume. However, a practical method to fully include these uncertainties is still lacking. This paper proposes a model based on the principal component analysis to describe the patient-specific local probability distributions of voxel motions so that the average values and variances of the dose distribution can be calculated and fully used later in inverse treatment planning. As usually only a very limited number of data for new patients is available; in this paper the analysis is extended to use population data. A basic assumption (which is justified retrospectively in this paper) is that general movements and deformations of a specific organ are similar despite variations in the shapes of the organ over the population. A proof of principle of the method for deformations of the prostate and the seminal vesicles is presented.

  6. A population-based model to describe geometrical uncertainties in radiotherapy: applied to prostate cases

    Energy Technology Data Exchange (ETDEWEB)

    Budiarto, E; Keijzer, M; Heemink, A W [Delft Institute of Applied Mathematics (DIAM), Technische Universiteit Delft, Mekelweg 4, 2628 CD Delft (Netherlands); Storchi, P R; Hoogeman, M S; Bondar, L; Mutanga, T F [Department of Radiation Oncology, Erasmus MC-Daniel den Hoed Cancer Centre. Groene Hilledijk 301, 3075 EA Rotterdam (Netherlands); De Boer, H C J, E-mail: e.budiarto@tudelft.nl [Department of Radiotherapy, Universitair Medisch Centrum Utrecht, Heidelberglaan 100, 3584 CX Utrecht (Netherlands)

    2011-02-21

    Local motions and deformations of organs between treatment fractions introduce geometrical uncertainties into radiotherapy. These uncertainties are generally taken into account in the treatment planning by enlarging the radiation target by a margin around the clinical target volume. However, a practical method to fully include these uncertainties is still lacking. This paper proposes a model based on the principal component analysis to describe the patient-specific local probability distributions of voxel motions so that the average values and variances of the dose distribution can be calculated and fully used later in inverse treatment planning. As usually only a very limited number of data for new patients is available; in this paper the analysis is extended to use population data. A basic assumption (which is justified retrospectively in this paper) is that general movements and deformations of a specific organ are similar despite variations in the shapes of the organ over the population. A proof of principle of the method for deformations of the prostate and the seminal vesicles is presented.

  7. The Comical Image of the Dragon in The Woman Warrior

    Institute of Scientific and Technical Information of China (English)

    艾露

    2013-01-01

    The figuration of the dragon is quite eye-catching and meaningful, particularly in the second episode of The Woman Warrior. By analyzing the image of the dragon in the text, and the relations of the dragon to the Chinese mythology and the tra⁃ditional Chinese medicine, this study argues Kingston has universalized the Chinese culture and exhibted her transnational world⁃view.

  8. Dragon's Blood extract has antithrombotic properties, affecting platelet aggregation functions and anticoagulation activities.

    Science.gov (United States)

    Xin, Nian; Li, Yu-Juan; Li, Yan; Dai, Rong-Ji; Meng, Wei-Wei; Chen, Yan; Schlappi, Michael; Deng, Yu-Lin

    2011-05-17

    Dragon's Blood from Dracaena cochinchinensis (Lour.) S.C. Chen (Yunnan, China), as a traditional Chinese medicinal herb, was shown to have certain antithrombotic effects. A new preparation process was used to extract effective components from Dragon's Blood. A 95% ethanol extract A (EA) and a precipitate B (PB) fraction were obtained and compared. Reliability of the preparation process was validated by pharmacodynamic experiments. A rat/mouse thrombosis and blood stasis model was developed for this study, and EA and PB effects on thrombosis, platelet functions and blood coagulation activities were analyzed. It was observed that the EA fraction had significantly better inhibitory effects than the PB fraction on thrombosis (pDragon's Blood contained pharmacologically effective compounds with antithrombotic effects, partially improving platelet function and anticoagulation activity. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  9. Multi-channel quantum dragons from rectangular nanotubes with even-odd structure

    Science.gov (United States)

    Inkoom, Godfred; Novotny, Mark

    Recently, a large class of nanostructures called quantum dragons have been discovered theoretically. Quantum dragons are nanostuctures with correlated disorder but have an electron transmission probability  (E) =1 for all energies E when connected to idealized leads. Hence for a single channel, the electrical conductance for a two-probe measurement should give the quantum of conductance Go =2e2/h . The time independent Schrödinger equation for the single band tight binding model is solved exactly to obtain  (E) . We have generalized the matrix method and the mapping methods of in order to study multi-channel quantum dragons for rectangular nanotubes with even-odd structure. The studies may be relevant for experimental rectangular nanotubes, such as MgO, copper phthalocyanine or some types of graphyne.. Supported in part by NSF Grant DMR-1206233.

  10. Investigation of Wave Transmission from a Floating Wave Dragon Wave Energy Converter

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen Harck; Andersen, Thomas Lykke

    2012-01-01

    This paper focuses on the calibration of the MIKE21BW model against the measured wave height reduction behind a 24 kW/m Wave Dragon (WD) wave energy converter. A numerical model is used to determine the wave transmission through the floating WD in varying wave conditions. The transmission obtained...

  11. GEOMETRIC TURBULENCE

    Directory of Open Access Journals (Sweden)

    Trunev A. P.

    2014-05-01

    Full Text Available In this article we have investigated the solutions of Maxwell's equations, Navier-Stokes equations and the Schrödinger associated with the solutions of Einstein's equations for empty space. It is shown that in some cases the geometric instability leading to turbulence on the mechanism of alternating viscosity, which offered by N.N. Yanenko. The mechanism of generation of matter from dark energy due to the geometric turbulence in the Big Bang has been discussed

  12. High level implementation of geometric multigrid solvers for finite element problems: Applications in atmospheric modelling

    Science.gov (United States)

    Mitchell, Lawrence; Müller, Eike Hermann

    2016-12-01

    The implementation of efficient multigrid preconditioners for elliptic partial differential equations (PDEs) is a challenge due to the complexity of the resulting algorithms and corresponding computer code. For sophisticated (mixed) finite element discretisations on unstructured grids an efficient implementation can be very time consuming and requires the programmer to have in-depth knowledge of the mathematical theory, parallel computing and optimisation techniques on manycore CPUs. In this paper we show how the development of bespoke multigrid preconditioners can be simplified significantly by using a framework which allows the expression of the each component of the algorithm at the correct abstraction level. Our approach (1) allows the expression of the finite element problem in a language which is close to the mathematical formulation of the problem, (2) guarantees the automatic generation and efficient execution of parallel optimised low-level computer code and (3) is flexible enough to support different abstraction levels and give the programmer control over details of the preconditioner. We use the composable abstractions of the Firedrake/PyOP2 package to demonstrate the efficiency of this approach for the solution of strongly anisotropic PDEs in atmospheric modelling. The weak formulation of the PDE is expressed in Unified Form Language (UFL) and the lower PyOP2 abstraction layer allows the manual design of computational kernels for a bespoke geometric multigrid preconditioner. We compare the performance of this preconditioner to a single-level method and hypre's BoomerAMG algorithm. The Firedrake/PyOP2 code is inherently parallel and we present a detailed performance analysis for a single node (24 cores) on the ARCHER supercomputer. Our implementation utilises a significant fraction of the available memory bandwidth and shows very good weak scaling on up to 6,144 compute cores.

  13. Dragon's Blood incense: misbranded as a drug of abuse?

    Science.gov (United States)

    Ford, S L; Steiner, R R; Thiericke, R; Young, R; Soine, W H

    2001-01-01

    An unknown red substance was being sold and used with other drugs of abuse in Virginia (often being used in conjunction with marihuana). The red substance was identified as Dragon's Blood incense from Daemonorops draco. In bioassays, Dragon's Blood incense exhibited a low, but measurable cytotoxicity in in vitro cell lines. Dragon's Blood incense or Volatilized Dragon's Blood had no adverse effect on mouse motor performance based on the inclined screen and rotorod tests. delta(9)-Tetrahydrocannibinol (THC) produced a dose-related decline in mouse performance on the rotorod test. The combination of Dragon's Blood incense or Volatilized Dragon's Blood with delta(9)-THC did not contribute further to the impairment of the mice on the rotorod. This data suggests that the abuse potential for Dragon's Blood incense alone or in combination with marihuana is minimal.

  14. [RP-HPLC characteristics of dragon's blood].

    Science.gov (United States)

    Gao, Xiu-Li; Jiang, Qian; Wang, Peng-Jiao; Zhang, Min

    2007-10-01

    To study the fingerprint of dragon's blood resina draconis by high performance liquid chromatography. The samples are extracted with methanol and separated on a Eclipse XDB-C18 column (4.6 mm x 150 mm, 5 microm) with the mobile phase of acetonitrile-H2O in gradient mode, and the flow rate was 1.0 mL x min(-1), the detection wavelength was 275 nm and the temperature of column was 40 degrees C. Loureirin B was used as the reference compound. HPLC fingerprint of dragon's blood was established and the similarity of the fingerprint was compared. The method is simple, accurate, and can be used to control the quality of dragon's blood.

  15. Reactor Simulation for Antineutrino Experiments using DRAGON and MURE

    CERN Document Server

    Jones, C L; Conrad, J M; Djurcic, Z; Fallot, M; Giot, L; Keefer, G; Onillon, A; Winslow, L

    2011-01-01

    Rising interest in nuclear reactors as a source of antineutrinos for experiments motivates validated, fast, and accessible simulations to predict reactor fission rates. Here we present results from the DRAGON and MURE simulation codes and compare them to other industry standards for reactor core modeling. We use published data from the Takahama-3 reactor to evaluate the quality of these simulations against the independently measured fuel isotopic composition. The propagation of the uncertainty in the reactor operating parameters to the resulting antineutrino flux predictions is also discussed.

  16. Application of a geometric and mathematical model to the biomechanics of the lumbar region in weightlifting athletes.

    Directory of Open Access Journals (Sweden)

    Fernando Blaya-Haro

    2016-11-01

    Full Text Available Introduction: The lumbar spine plays an important role in the biomechanics of the individual as well as contributes to define the posture. Material and methods: In this study we have proposed a geometric and mathematical model in the subjects who practice the sport of weightlifting, in order to evaluate and characterize graphically the morphology of the lumbar spine in the sagittal plane to define, analyze and predict its behavior. Results and discussion: The technical aspect of weightlifting is very precise and requires excessive joint mobility of the lumbar spine in the same time when it is integrating certain axial compressive forces due to the weight to be lifted. The scope of the results obtained in the geometric and mathematical models are of great interest due to their methodological significance for professionals who dedicate to the study and measurement of spine from different perspectives such as biomechanics, geometric, diagnostic, medical, physiotherapeutic, athletic, etc. Conclusions: We believe that the results obtained by the proposed models are relevant for the systematization and posture modeling of the individual, once the dependency relationships are formulated between the proposed variables, thereby extending the study to other regions and fundamental concepts in the overall analysis of posture.

  17. Circumventing Imprecise Geometric Information and Development of a Unified Modeling Technique for Various Flow Regimes in Capillary Tubes

    Science.gov (United States)

    Abbasi, Bahman

    2012-11-01

    Owing to their manufacturability and reliability, capillary tubes are the most common expansion devices in household refrigerators. Therefore, investigating flow properties in the capillary tubes is of immense appeal in the said business. The models to predict pressure drop in two-phase internal flows invariably rely upon highly precise geometric information. The manner in which capillary tubes are manufactured makes them highly susceptible to geometric imprecisions, which renders geometry-based models unreliable to the point of obsoleteness. Aware of the issue, manufacturers categorize capillary tubes based on Nitrogen flow rate through them. This categorization method presents an opportunity to substitute geometric details with Nitrogen flow data as the basis for customized models. The simulation tools developed by implementation of this technique have the singular advantage of being applicable across flow regimes. Thus the error-prone process of identifying compatible correlations is eliminated. Equally importantly, compressibility and chocking effects can be incorporated in the same model. The outcome is a standalone correlation that provides accurate predictions, regardless of any particular fluid or flow regime. Thereby, exploratory investigations for capillary tube design and optimization are greatly simplified. Bahman Abbasi, Ph.D., is Lead Advanced Systems Engineer at General Electric Appliances in Louisville, KY. He conducts research projects across disciplines in the household refrigeration industry.

  18. Radiation model for row crops: I. Geometric view factors and parameter optimization

    Science.gov (United States)

    Row crops with partial cover result in different radiation partitioning to the soil and canopy compared with full cover; however, methods to account for partial cover have not been adequately investigated. The objectives of this study were to: (i) develop geometric view factors to account for the sp...

  19. Geometric technique for the kinematic modeling of a 5 DOF redundant manipulator

    CSIR Research Space (South Africa)

    Makondo, N

    2012-11-01

    Full Text Available to the problem and determines efficiently the relationship between the joints and the end-effector without iterative process. Using a geometric method, if a solution exists, we provide all feasible solutions to the IK problem and from these solutions an optimal...

  20. Vehicle Concept Model Abstractions For Integrated Geometric, Inertial ,Rigid Body, Powertrain and FE Analysis

    Science.gov (United States)

    2011-06-17

    prism with paraboloid extending away from the input section. Geometric abstraction parameters include input width/height parameter, truncated pyramid...length, input/base section width/height ratio, offset of paraboloid curvature, and thickness. Acceleration performance is dependent on the internal

  1. Comparison of Orbit-Based and Time-Offset-Based Geometric Correction Models for SAR Satellite Imagery Based on Error Simulation.

    Science.gov (United States)

    Hong, Seunghwan; Choi, Yoonjo; Park, Ilsuk; Sohn, Hong-Gyoo

    2017-01-17

    Geometric correction of SAR satellite imagery is the process to adjust the model parameters that define the relationship between ground and image coordinates. To achieve sub-pixel geolocation accuracy, the adoption of the appropriate geometric correction model and parameters is important. Until now, various geometric correction models have been developed and applied. However, it is still difficult for general users to adopt a suitable geometric correction models having sufficient precision. In this regard, this paper evaluated the orbit-based and time-offset-based models with an error simulation. To evaluate the geometric correction models, Radarsat-1 images that have large errors in satellite orbit information and TerraSAR-X images that have a reportedly high accuracy in satellite orbit and sensor information were utilized. For Radarsat-1 imagery, the geometric correction model based on the satellite position parameters has a better performance than the model based on time-offset parameters. In the case of the TerraSAR-X imagery, two geometric correction models had similar performance and could ensure sub-pixel geolocation accuracy.

  2. Comparison of Orbit-Based and Time-Offset-Based Geometric Correction Models for SAR Satellite Imagery Based on Error Simulation

    Science.gov (United States)

    Hong, Seunghwan; Choi, Yoonjo; Park, Ilsuk; Sohn, Hong-Gyoo

    2017-01-01

    Geometric correction of SAR satellite imagery is the process to adjust the model parameters that define the relationship between ground and image coordinates. To achieve sub-pixel geolocation accuracy, the adoption of the appropriate geometric correction model and parameters is important. Until now, various geometric correction models have been developed and applied. However, it is still difficult for general users to adopt a suitable geometric correction models having sufficient precision. In this regard, this paper evaluated the orbit-based and time-offset-based models with an error simulation. To evaluate the geometric correction models, Radarsat-1 images that have large errors in satellite orbit information and TerraSAR-X images that have a reportedly high accuracy in satellite orbit and sensor information were utilized. For Radarsat-1 imagery, the geometric correction model based on the satellite position parameters has a better performance than the model based on time-offset parameters. In the case of the TerraSAR-X imagery, two geometric correction models had similar performance and could ensure sub-pixel geolocation accuracy. PMID:28106729

  3. Comparison of Orbit-Based and Time-Offset-Based Geometric Correction Models for SAR Satellite Imagery Based on Error Simulation

    Directory of Open Access Journals (Sweden)

    Seunghwan Hong

    2017-01-01

    Full Text Available Geometric correction of SAR satellite imagery is the process to adjust the model parameters that define the relationship between ground and image coordinates. To achieve sub-pixel geolocation accuracy, the adoption of the appropriate geometric correction model and parameters is important. Until now, various geometric correction models have been developed and applied. However, it is still difficult for general users to adopt a suitable geometric correction models having sufficient precision. In this regard, this paper evaluated the orbit-based and time-offset-based models with an error simulation. To evaluate the geometric correction models, Radarsat-1 images that have large errors in satellite orbit information and TerraSAR-X images that have a reportedly high accuracy in satellite orbit and sensor information were utilized. For Radarsat-1 imagery, the geometric correction model based on the satellite position parameters has a better performance than the model based on time-offset parameters. In the case of the TerraSAR-X imagery, two geometric correction models had similar performance and could ensure sub-pixel geolocation accuracy.

  4. Forces and overtopping on 2. generation Wave Dragon for Nissum Bredning. Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Hald, T.; Frigaard, P.

    2001-11-01

    The purpose of this report is to summarize forcing and overtopping on the redesigned Wave Dragon model. The results will establish a basis for the development of the 1:4.5 scale prototype planned for testing in Nissum Bredning, a sea inlet on the Danish West Coast. For comparison also results obtained using the 1. generation are referred in this report. (au)

  5. DETERMINATION ALGORITHM OF OPTIMAL GEOMETRICAL PARAMETERS FOR COMPONENTS OF FREIGHT CARS ON THE BASIS OF GENERALIZED MATHEMATICAL MODELS

    Directory of Open Access Journals (Sweden)

    O. V. Fomin

    2013-10-01

    Full Text Available Purpose. Presentation of features and example of the use of the offered determination algorithm of optimum geometrical parameters for the components of freight cars on the basis of the generalized mathematical models, which is realized using computer. Methodology. The developed approach to search for optimal geometrical parameters can be described as the determination of optimal decision of the selected set of possible variants. Findings. The presented application example of the offered algorithm proved its operation capacity and efficiency of use. Originality. The determination procedure of optimal geometrical parameters for freight car components on the basis of the generalized mathematical models was formalized in the paper. Practical value. Practical introduction of the research results for universal open cars allows one to reduce container of their design and accordingly to increase the carrying capacity almost by100 kg with the improvement of strength characteristics. Taking into account the mass of their park this will provide a considerable economic effect when producing and operating. The offered approach is oriented to the distribution of the software packages (for example Microsoft Excel, which are used by technical services of the most enterprises, and does not require additional capital investments (acquisitions of the specialized programs and proper technical staff training. This proves the correctness of the research direction. The offered algorithm can be used for the solution of other optimization tasks on the basis of the generalized mathematical models.

  6. A geometrical model of vertical translation and alar ligament tension in atlanto-axial rotation.

    Science.gov (United States)

    Boszczyk, B M; Littlewood, A P; Putz, R

    2012-08-01

    While allowing the greatest range of axial rotation of the entire spine with 40° to each side, gradual restraint at the extremes of motion by the alar ligaments is of vital importance. In order for the ligaments to facilitate a gradual transition from the neutral to the elastic zone, a complex interaction of axial rotation and vertical translation via the biconvex articular surfaces is essential. The aim of this investigation is to establish a geometrical model of the intricate interaction of the alar ligaments and vertical translatory motion of C1/C2 in axial rotation. Bilateral alar ligaments including the odontoid process and condylar bony entheses were removed from six adult cadavers aged 65-89 years within 48 h of death. All specimens were judged to be free of abnormalities with the exception of non-specific degenerative changes. Dimensions of the odontoid process and alar ligaments were measured. Graphical multiplanar reconstruction of atlanto-axial rotation was done in the transverse and frontal planes for the neutral position and for rotation to 40° with vertical translation of 3 mm. The necessary fibre elongation of the alar ligaments in the setting with and without vertical translation of the atlas was calculated. The mean diameter of the odontoid process in the sagittal plane was 10.6 mm (SD 1.1). The longest fibre length was measured from the posterior border of the odontoid enthesis to the posterior border of the condylar enthesis with an average of 13.2 mm (SD 2.5) and the shortest between the lateral (anterior) border odontoid enthesis and the anterior condylar enthesis with an average of 8.2 mm (SD 2.2). In graphical multiplanar reconstruction of atlanto-axial rotation to 40° without vertical translation of C1/C2, theoretical alar fibre elongation reaches 27.1% for the longest fibres, which is incompatible with the collagenous structure of the alar ligaments. Allowing 3 mm caudal translation of C1 on C2 at 40° rotation, as facilitated by the

  7. Model of counterparty risk with geometric attenuation and valuation of CDS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    To investigate the impact of microstructure interdependency of a counterparty explicitly, a geometric function is introduced in one firm's default intensity to reflect the attenuation behavior of the impact of its counterparty firm's default. The general joint distribution and marginal distributions of default times are derived by employing the change of measure. The fair premium of a vanilla CDS (credit default swap) is obtained in continuous and discrete contexts, respectively. The swap premium in a discr...

  8. Agustin de Betancourt’s Wind Machine for Draining Marshy Ground: Approach to Its Geometric Modeling with Autodesk Inventor Professional

    Directory of Open Access Journals (Sweden)

    José Ignacio Rojas-Sola

    2016-12-01

    Full Text Available The present study shows the process followed in making the three-dimensional model and geometric documentation of a historical invention of the renowned Spanish engineer Agustin de Betancourt y Molina, which forms part of his rich legacy. Specifically, this was a wind machine for draining marshy ground, designed in 1789. The present research relies on the computer-aided design (CAD techniques using Autodesk Inventor Professional software, based on the scant information provided by the only two drawings of the machine, making it necessary to propose a number of dimensional and geometric hypotheses as well as a series of movement restrictions (degrees of freedom, to arrive at a consistent design. The results offer a functional design for this historic invention.

  9. A detailed study on the use of polynomial functions for modeling geometric distortion in magnetic resonance imaging.

    Science.gov (United States)

    Wang, Deming; Yang, Zhengyi

    2008-03-01

    The use of polynomial functions for modeling geometric distortion in magnetic resonance imaging (MRI) that arises from scanner's hardware imperfection is studied in detail. In this work, the geometric distortion data from four representative MRI systems were used. Modeling of these data using polynomial functions of the fourth, fifth, sixth, and seventh orders was carried out. In order to investigate how this modeling performed for different size and shape of the volume of interest, the modeling was carried out for three different volumes of interest (VOI): a cube, a cylinder, and a sphere. The modeling's goodness was assessed using both the maximum and mean absolute errors. The modeling results showed that (i) for the cube VOI there appears to be an optimal polynomial function that gives the least modeling errors and the sixth order polynomial was found to be the optimal polynomial function for the size of the cubic VOI considered in the present work; (ii) for the cylinder VOI, all four polynomials performed approximately equally well but a trend of a slight decrease in the mean absolute error with the increasing order of the polynomial was noted; and (iii) for the sphere VOI, the maximum absolute error showed some variations with the order of the polynomial, with the fourth order polynomial producing the smallest maximum absolute errors. It is further noted that extrapolation could lead to very large errors so any extrapolation needs to be avoided. A detailed analysis on the modeling errors is presented.

  10. Advanced Control Techniques for WEC Wave Dragon

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter; Jasinski, M.;

    2007-01-01

    This paper presents the ongoing work on control of the Wave Dragon wave energy converter. Research is being conducted in and between several centers across Europe. This is building upon the knowledge gained in the prototype project, and will enable much better performance of the future deployment...

  11. Dragon's blood secretion and its ecological significance.

    Science.gov (United States)

    Jura-Morawiec, Joanna; Tulik, Mirela

    Dragon's blood is the name given to a red exudate produced by some plant species belonging to the genera Daemonorops, Dracaena, Croton and Pterocarpus. These are endemic to various parts of the globe. It is classified as a resin or latex depending on its mode of secretion and its chemical composition, which is species specific. This red substance functions in defence and is produced (a) constitutively and stored in preformed anatomical structures, or (b) by induction in response to traumatic events, such as mechanical injury, pathogen attack or invasion by insects. Apart from its defensive role in plants, dragon's blood is also a valuable natural resource renowned since antiquity for its diverse medicinal properties and uses in art. Despite the great importance of dragon's blood, our knowledge of the biological basis for its secretion is still incomplete. This review summarizes recent advances in the study of the anatomical basis for its secretion, and discusses its classification and ecological function. Bringing some clarity to these issues may also help in the commercial sourcing of dragon's blood.

  12. Dragon Boat Festival (Dyun Ngh Jit).

    Science.gov (United States)

    Wu, Julia; Quan, Ella Y.

    This bilingual-bicultural reader in Cantonese and English is intended for elementary school children in a bilingual education setting. Pen-and-ink drawings illustrate the story of the traditional dragon boat festival. Each page of the text is written in Chinese characters, Romanized form, and in English. (NCR)

  13. Ultrasonographic anatomy of bearded dragons (Pogona vitticeps).

    Science.gov (United States)

    Bucy, Daniel S; Guzman, David Sanchez-Migallon; Zwingenberger, Allison L

    2015-04-15

    To determine which organs can be reliably visualized ultrasonographically in bearded dragons (Pogona vitticeps), describe their normal ultrasonographic appearance, and describe an ultrasonographic technique for use with this species. Cross-sectional study. 14 healthy bearded dragons (6 females and 8 males). Bearded dragons were manually restrained in dorsal and sternal recumbency, and coelomic organs were evaluated by use of linear 7- to 15-MHz and microconvex 5- to 8-MHz transducers. Visibility, size, echogenicity, and ultrasound transducer position were assessed for each organ. Coelomic ultrasonography with both microconvex and linear ultrasound transducers allowed for visualization of the heart, pleural surface of the lungs, liver, caudal vena cava, aorta, ventral abdominal vein, gallbladder, fat bodies, gastric fundus, cecum, colon, cloaca, kidneys, and testes or ovaries in all animals. The pylorus was visualized in 12 of 14 animals. The small intestinal loops were visualized in 12 of 14 animals with the linear transducer, but could not be reliably identified with the microconvex transducer. The hemipenes were visualized in 7 of 8 males. The adrenal glands and spleen were not identified in any animal. Anechoic free coelomic fluid was present in 11 of 14 animals. Heart width, heart length, ventricular wall thickness, gastric fundus wall thickness, and height of the caudal poles of the kidneys were positively associated with body weight. Testis width was negatively associated with body weight in males. Results indicated coelomic ultrasonography is a potentially valuable imaging modality for assessment of most organs in bearded dragons and can be performed in unsedated animals.

  14. Comparative analyses of thermodynamic properties assessments, performed by geometric models: Application to the Ni-Bi-Zn system

    Directory of Open Access Journals (Sweden)

    Gandova V.

    2013-01-01

    Full Text Available The thermochemical properties of metals and alloys are essential for the chemists to invent and improve metallurgical and materials’ design processes. However, the properties of multicomponent systems are still scarcely known due to experimental difficulties and the large number of related systems. Thus, the modelling of some thermodynamic properties would be advantageous when experimental data are missing. Considering mentioned facts, geometric models to estimate some thermodynamic properties for the liquid phase of the Ni-Bi-Zn systems. The calculations have been performed in a wide temperature range (1000-2000 K. Ternary interaction parameters for the liquid phase allowing molar Gibbs excess energy calculation have been determined.

  15. Influence of muscle-tendon complex geometrical parameters on modeling passive stretch behavior with the Discrete Element Method.

    Science.gov (United States)

    Roux, A; Laporte, S; Lecompte, J; Gras, L-L; Iordanoff, I

    2016-01-25

    The muscle-tendon complex (MTC) is a multi-scale, anisotropic, non-homogeneous structure. It is composed of fascicles, gathered together in a conjunctive aponeurosis. Fibers are oriented into the MTC with a pennation angle. Many MTC models use the Finite Element Method (FEM) to simulate the behavior of the MTC as a hyper-viscoelastic material. The Discrete Element Method (DEM) could be adapted to model fibrous materials, such as the MTC. DEM could capture the complex behavior of a material with a simple discretization scheme and help in understanding the influence of the orientation of fibers on the MTC׳s behavior. The aims of this study were to model the MTC in DEM at the macroscopic scale and to obtain the force/displacement curve during a non-destructive passive tensile test. Another aim was to highlight the influence of the geometrical parameters of the MTC on the global mechanical behavior. A geometrical construction of the MTC was done using discrete element linked by springs. Young׳s modulus values of the MTC׳s components were retrieved from the literature to model the microscopic stiffness of each spring. Alignment and re-orientation of all of the muscle׳s fibers with the tensile axis were observed numerically. The hyper-elastic behavior of the MTC was pointed out. The structure׳s effects, added to the geometrical parameters, highlight the MTC׳s mechanical behavior. It is also highlighted by the heterogeneity of the strain of the MTC׳s components. DEM seems to be a promising method to model the hyper-elastic macroscopic behavior of the MTC with simple elastic microscopic elements. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Geometric model and analysis of rod-like large space structures

    Science.gov (United States)

    Nayfeh, A. H.; Hefney, M. S.

    1978-01-01

    The application of geometrical schemes to large sphere antenna reflectors was investigated. The purpose of these studies is to determine the shape and size of flat segmented surfaces which approximate general shells of revolution and in particular spherical and paraboloidal reflective surfaces. The extensive mathematical and computational geometry analyses of the reflector resulted in the development of a general purpose computer program. This program is capable of generating the complete design parameters of the dish and can meet stringent accuracy requirements. The computer program also includes a graphical self contained subroutine which graphically displays the required design.

  17. A new representation of orientable 2-manifold polygonal surfaces for geometric modelling

    Institute of Scientific and Technical Information of China (English)

    LIU Yong-jin; TANG Kai; JOENJA Ajay

    2006-01-01

    Many graphics and computer-aided design applications require that the polygonal meshes used in geometric computing have the properties of not only 2-manifold but also are orientable. In this paper, by collecting previous work scattered in the topology and geometry literature, we rigorously present a theoretical basis for orientable polygonal surface representation from a modern point of view. Based on the presented basis, we propose a new combinatorial data structure that can guarantee the property of orientable 2-manifolds and is primal/dual efficient. Comparisons with other widely used data structures are also presented in terms of time and space efficiency.

  18. [New study on species of Chinese medicine dragon's blood].

    Science.gov (United States)

    Zhang, Wei; Zhang, Rui-Xian; Li, Jian; Zhao, Hai-Liang

    2016-04-01

    Through comprehensive study on the descriptions of dragon's blood in traditional medical books, we pointed out that before Tang Dynasty, Butea monosperma was used as dragon's blood; during Tang and Song Dynasty, Liquidambar formosana. was used as dragon's blood; in Commentaries on the illustrations of Song Dynasty, the author made a mistake by combined the descriptions of Butea monosperma with the descriptions of the prepared medicine of Dracaena cochinchinensis in dragon's blood, and thus the oversea species D. cochinchinensis became the mainstream of dragon's blood source in homeland. Until the foundation of the Republic of China, Daemonorops draco replaced D. cochinchinensis to the main source of dragon's blood. Copyright© by the Chinese Pharmaceutical Association.

  19. Geometric Algebra

    CERN Document Server

    Chisolm, Eric

    2012-01-01

    This is an introduction to geometric algebra, an alternative to traditional vector algebra that expands on it in two ways: 1. In addition to scalars and vectors, it defines new objects representing subspaces of any dimension. 2. It defines a product that's strongly motivated by geometry and can be taken between any two objects. For example, the product of two vectors taken in a certain way represents their common plane. This system was invented by William Clifford and is more commonly known as Clifford algebra. It's actually older than the vector algebra that we use today (due to Gibbs) and includes it as a subset. Over the years, various parts of Clifford algebra have been reinvented independently by many people who found they needed it, often not realizing that all those parts belonged in one system. This suggests that Clifford had the right idea, and that geometric algebra, not the reduced version we use today, deserves to be the standard "vector algebra." My goal in these notes is to describe geometric al...

  20. The importance of object geometric properties for trajectory modeling of functional reach-to-grasp robotic therapy tasks - biomed 2009.

    Science.gov (United States)

    Nathan, Dominic; Jeutter, Dean C

    2009-01-01

    Reaching-to-grasp is essential for the performance of activities of daily living. Pathologies such as stroke, spinal cord injury, cerebral palsy, etc. limit individuals from being able to perform meaningful upper extremity movements, leading to a reduced quality of life. Robotic aided therapy is gaining prevalence as a rehabilitation tool because it can provide consistent and quantitative therapy. Such systems are dependent upon models to generate trajectories that dictate their movements. Time scaled polynomial techniques have been extensively used for robotic model development and trajectory generation. However, this approach is limited because it cannot support functional therapy tasks. This is largely due to the influence of cognitive complexity not completely considered with regards to the activity performed. We examine the influence of task cognitive complexity as manifested through the geometric properties of each object on the movement trajectories and kinematic dependent variables tasks through a motion analysis study using healthy subjects (N=8). We then compare the predicted results from several robotic trajectory models with the actual motion analysis data. Our results show that there are differences present, between the trajectory data and kinematic properties for each task, that are specific to the geometric properties of each object. In addition, the predicted results from the robotic trajectory models do not fully correlate with the actual movement information. This study is important as it will help provide some insight with regards to factors that need to be considered during the development of future robotic trajectory models and controllers for upper extremity functional rehabilitation tasks.

  1. A United Image Force for Deformable Models and Direct Transforming Geometric Active Contorus to Snakes by Level Sets

    CERN Document Server

    Lu, Hongyu

    2012-01-01

    The image force in active contours plays a key role for shape recovery in medical image analysis. The image force constructed from the heat diffusion model can not indicate segment the image accurately through it exhibits a uniform distribution of force field around the object. The features of the image force based on electrostatic field model are opposite. Firstly, this study introduces a fusion scheme of these two image forces, which capable of extracting the object boundary with high precision and fast speed. Till now, there is no satisfied analysis of the relationship between Snakes and Geometric Active Contour. The second contribution of this study indicates that the GAC model can be deduced directly from Snakes models. It proves that the each term in GAC and Snakes is correspondent and has the same function. These two models are only expressed using different mathematics.

  2. The importance of tumor volume in the prognosis of patients with glioblastoma. Comparison of computerized volumetry and geometric models

    Energy Technology Data Exchange (ETDEWEB)

    Iliadis, Georgios; Misailidou, Despina [Dept. of Radiation Oncology, ' ' Papageorgiou' ' General Hospital, Thessaloniki (Greece); Selviaridis, Panagiotis; Chatzisotiriou, Athanasios [Dept. of Neurosurgery, ' ' AHEPA' ' Hospital, Aristotle Univ. of Thessaloniki, School of Medicine (Greece); Kalogera-Fountzila, Anna [Dept. of Radiology, ' ' AHEPA' ' Hospital, Aristotle Univ. of Thessaloniki, School of Medicine (Greece); Fragkoulidi, Anna; Fountzilas, George [Dept. of Medical Oncology, ' ' Papageorgiou' ' General Hospital, Aristotle Univ. of Thessaloniki, School of Medicine (Greece); Baltas, Dimos; Tselis, Nikolaos; Zamboglou, Nikolaos [Dept. of Radiation Oncology, Klinikum Offenbach (Germany)

    2009-11-15

    Background and purpose: the importance of tumor volume as a prognostic factor in high-grade gliomas is highly controversial and there are numerous methods estimating this parameter. In this study, a computer-based application was used in order to assess tumor volume from hard copies and a survival analysis was conducted in order to evaluate the prognostic significance of preoperative volumetric data in patients harboring glioblastomas. Patients and methods: 50 patients suffering from glioblastoma were analyzed retrospectively. Tumor volume was determined by the various geometric models as well as by an own specialized software (Volumio). Age, performance status, type of excision, and tumor location were also included in the multivariate analysis. Results: the spheroid and rectangular models overestimated tumor volume, while the ellipsoid model offered the best approximation. Volume failed to attain any statistical significance in prognosis, while age and performance status confirmed their importance in progression-free and overall survival of patients. Conclusion: geometric models provide a rough approximation of tumor volume and should not be used, as accurate determination of size is of paramount importance in order to draw safe conclusions in oncology. Although the significance of volumetry was not disclosed, further studies are definitely required. (orig.)

  3. Estimation of the Current Peak Value Distribution of All Lightning to the Ground by Electro-Geometric Model

    Science.gov (United States)

    Sakata, Tadashi; Yamamoto, Kazuo; Sekioka, Shozo; Yokoyama, Shigeru

    When we examine the lightning frequency and the lightning shielding effect by EGM (electro-geometric model), we need the current distribution of all lightning to the ground. The lightning current distribution to structures is different from this distribution, but it has been used in EGM conventionally. We assumed the lightning striking distance coefficient related to height of structures for getting the result which corresponds to observed lightning frequency to structures, and estimated the current distribution of all lightning to the ground from data listed in IEC 62305 series by EGM. The estimated distribution adjusted by detection efficiency of LLS almost corresponded to observed distribution by LLS.

  4. Thickness Reconstruction of Layers by 3D Geometrical Model to Characterize Caledonian Tectonic Complex and Data in Latvia

    Science.gov (United States)

    Ukass, J.; Saks, T.; Popovs, K.

    2012-04-01

    In present study we attempt to verify the 3D geological model, which has been built on a variety of heterogeneous data sources for the Baltic Basin (BB). Data describing the displacement along the faults and associated thickness changes of the syntectonic strata is sparse and reflects only regional relevance (Brangulis & Konsins 2002). Borehole logs provide most reliable and comprehensive data source for reconstructing the structural geology of the Latvia sedimentary cover as sufficient quality seismic data is available only for the local scale structures. Based on the thickness analysis of the boreholes rough resolution 3D geological tectonic block model was developed to deconstruct the geological structure of the Latvia Caledonian sedimentary sequence. MOSYS modeling system was used for the geological structure modeling, developed within the PUMA project (Sennikovs et al, 2011). Algorithmic genetic approach was applied to interpolate data of well logs as strata volume and sequentially to reconstruct the post-deformation situation. This approach allows modifying model construction in any step and all processes are fully documented and are repeatable. Geometrical model consists of 33 tectonic blocks bordered by the faults which were distributed by interpreting displacement amount of the blocks along the faults providing an opportunity to characterize common tectonic evolution. The study results indicate insignificant thickness change of the Ordovician and Silurian strata along the faults suggesting that major slip event along the faults occurred during the late Silurian and early Devonian, and some secondary fault reactivation during the middle Devonian Narva time. Uplift of the territory during this time is confirmed by the presence of the regional unconformity. Constructed rough resolution 3D geometrical model suggests shortening along the horizontal axis approximately 10 - 20% but most of the shortening has occurred in the central-west part of Latvia where it

  5. Model theory and algebraic geometry an introduction to E. Hrushovski’s proof of the geometric Mordell-Lang conjecture

    CERN Document Server

    1998-01-01

    This introduction to the recent exciting developments in the applications of model theory to algebraic geometry, illustrated by E. Hrushovski's model-theoretic proof of the geometric Mordell-Lang Conjecture starts from very basic background and works up to the detailed exposition of Hrushovski's proof, explaining the necessary tools and results from stability theory on the way. The first chapter is an informal introduction to model theory itself, making the book accessible (with a little effort) to readers with no previous knowledge of model theory. The authors have collaborated closely to achieve a coherent and self- contained presentation, whereby the completeness of exposition of the chapters varies according to the existence of other good references, but comments and examples are always provided to give the reader some intuitive understanding of the subject.

  6. Static analysis of offshore risers with a geometrically-exact 3D beam model subjected to unilateral contact

    Science.gov (United States)

    Neto, Alfredo Gay; Martins, Clóvis A.; Pimenta, Paulo M.

    2014-01-01

    In offshore applications there are elements that can be modeled as long beams, such as umbilical cables, flexible and rigid pipes and hoses, immersed in the sea water, suspended from the floating unit to the seabed. The suspended part of these elements is named "riser" and is subjected to the ocean environment loads, such as waves and sea current. This work presents a structural geometrically-exact 3D beam model, discretized using the finite element method for riser modeling. An updated Lagrangian framework for the rotation parameterization has been used for the description of the exact kinematics. The goal is to perform a complete static analysis, considering the oceanic loads and the unilateral contact with the seabed, extending the current standard analysis for situations in which very large rotations occurs, in particular, large torsion. Details of the nonlinear 3D model and loads from oceanic environment are discussed, including the contact unilateral constraint.

  7. Geometric Quantum Discord in the Heisenberg XX Model with Three-Spin Interactions

    Science.gov (United States)

    Xie, Yu-Xia; Liu, Jing; Sun, Yu-Hang

    2017-02-01

    Quantum discord is a resource for quantum information processing tasks, and seeking flexible ways to control it is of practical significance. We investigate the trace distance, Bures distance, and Hellinger distance geometric quantum discords (GQDs) for thermal states of the Heisenberg XX chain with three-spin interactions. The results show that both the XZX + YZY and XZY - YZX types of three-spin interactions can be used to enhance evidently the GQDs for the boundary spins of the chain. The optimal strengths of three-spin interactions for which the maximum enhancement of the GQDs are achieved are strongly dependent on the GQD measures we adopted and the number of spins in the chain.

  8. Geometric Quantum Discord in the Heisenberg XX Model with Three-Spin Interactions

    Science.gov (United States)

    Xie, Yu-Xia; Liu, Jing; Sun, Yu-Hang

    2016-11-01

    Quantum discord is a resource for quantum information processing tasks, and seeking flexible ways to control it is of practical significance. We investigate the trace distance, Bures distance, and Hellinger distance geometric quantum discords (GQDs) for thermal states of the Heisenberg XX chain with three-spin interactions. The results show that both the XZX + YZY and XZY -YZX types of three-spin interactions can be used to enhance evidently the GQDs for the boundary spins of the chain. The optimal strengths of three-spin interactions for which the maximum enhancement of the GQDs are achieved are strongly dependent on the GQD measures we adopted and the number of spins in the chain.

  9. Features in geometric receiver shapes modelling bat-like directivity patterns.

    Science.gov (United States)

    Guarato, Francesco; Andrews, Heather; Windmill, James F C; Jackson, Joseph; Pierce, Gareth; Gachagan, Anthony

    2015-09-03

    The directional properties of bat ears as receivers is a current area of interest in ultrasound research. This paper presents a new approach to analyse the relationship between morphological features and acoustical properties of the external ear of bat species. The beam pattern of Rousettus leschenaultii's right ear is measured and compared to that of receiver structures whose design is inspired by the bat ear itself and made of appropriate geometric shapes. The regular shape of these receivers makes it possible to control the key reception parameters and thus to understand the effect on the associated beam pattern of the parameters themselves. Measurements show one receiver structure has a beam pattern very similar to that of R. leschenaultii's ear, thus explaining the function of individual parts constituting its ear. As it is applicable to all bat species, this approach can provide a useful tool to investigate acoustics in bats, and possibly other mammals.

  10. Geometric Model of Black Hole Quantum N-portrait, Extradimensions and Thermodynamics

    Directory of Open Access Journals (Sweden)

    Antonia M. Frassino

    2016-05-01

    Full Text Available Recently a short scale modified black hole metric, known as holographic metric, has been proposed in order to capture the self-complete character of gravity. In this paper we show that such a metric can reproduce some geometric features expected from the quantum N-portrait beyond the semi-classical limit. We show that for a generic N this corresponds to having an effective energy momentum tensor in Einstein equations or, equivalently, non-local terms in the gravity action. We also consider the higher dimensional extension of the metric and the case of an AdS cosmological term. We provide a detailed thermodynamic analysis of both cases, with particular reference to the repercussions on the Hawking-Page phase transition.

  11. Stochastic modeling and vibration analysis of rotating beams considering geometric random fields

    Science.gov (United States)

    Choi, Chan Kyu; Yoo, Hong Hee

    2017-02-01

    Geometric parameters such as the thickness and width of a beam are random for various reasons including manufacturing tolerance and operation wear. Due to these random parameter properties, the vibration characteristics of the structure are also random. In this paper, we derive equations of motion to conduct stochastic vibration analysis of a rotating beam using the assumed mode method and stochastic spectral method. The accuracy of the proposed method is first verified by comparing analysis results to those obtained with Monte-Carlo simulation (MCS). The efficiency of the proposed method is then compared to that of MCS. Finally, probability densities of various modal and transient response characteristics of rotating beams are obtained with the proposed method.

  12. Dragon's blood: botany, chemistry and therapeutic uses.

    Science.gov (United States)

    Gupta, Deepika; Bleakley, Bruce; Gupta, Rajinder K

    2008-02-12

    Dragon's blood is one of the renowned traditional medicines used in different cultures of world. It has got several therapeutic uses: haemostatic, antidiarrhetic, antiulcer, antimicrobial, antiviral, wound healing, antitumor, anti-inflammatory, antioxidant, etc. Besides these medicinal applications, it is used as a coloring material, varnish and also has got applications in folk magic. These red saps and resins are derived from a number of disparate taxa. Despite its wide uses, little research has been done to know about its true source, quality control and clinical applications. In this review, we have tried to overview different sources of Dragon's blood, its source wise chemical constituents and therapeutic uses. As well as, a little attempt has been done to review the techniques used for its quality control and safety.

  13. Geometrically exact beam elements and smooth contact schemes for the modeling of fiber-based materials and structures

    CERN Document Server

    Meier, Christoph; Wall, Wolfgang A; Popp, Alexander

    2016-01-01

    Recently, the authors have proposed a novel all-angle beam contact (ABC) formulation that combines the advantages of existing point and line contact models in a variationally consistent manner. However, the ABC formulation has so far only been applied in combination with a special torsion-free beam model, which yields a very simple and efficient finite element formulation, but which is restricted to initially straight beams with isotropic cross-sections. In order to abstain from these restrictions, the current work combines the ABC formulation with a geometrically exact Kirchhoff-Love beam element formulation that is capable of treating even the most general cases of slender beam problems in terms of initial geometry and external loads. While the neglect of shear deformation that is inherent to this formulation has been shown to provide considerable numerical advantages in the range of high beam slenderness ratios, alternative shear-deformable beam models are required for examples with thick beams. The curren...

  14. Reexamination of Nuclear Shape Transitions in Gadolinium and Dysprosium Isotopes Chains by Using the Geometric Collective Model

    Directory of Open Access Journals (Sweden)

    Khalaf A. M.

    2014-01-01

    Full Text Available The critical points of potential energy surface (PES’s of the limits of nuclear struc- ture harmonic oscillator, axially symmetric rotor and deformed -soft and discussed in framework of the general geometric collective model (GCM. Also the shape phase transitions linking the three dynamical symmetries are studied taking into account only three parameters in the PES’s. The model is tested for the case of 238 92 U , which shows a more prolate behavior. The optimized model parameters have been adjusted by fit- ting procedure using a simulated search program in order to reproduce the experimental excitation energies in the ground state band up to 6 + and the two neutron separation energies.

  15. Geometric Corroboration of the Earliest Lensed Galaxy at z~10.8 from Robust Free-Form Modelling

    CERN Document Server

    Chan, Brian M Y; Lim, Jeremy; Diego, Jose M; Zitrin, Adi; Coe, Dan; Ford, Holland C

    2016-01-01

    A multiply-lensed galaxy, MACS0647-JD, with a probable photometric redshift of $z\\simeq 10.7^{+0.6}_{-0.4}$ is claimed to constitute one of the very earliest known galaxies, formed well before reionization was completed. However, spectral evidence that MACS0647-JD lies at high redshift has proven infeasible and so here we seek an independent lensing based "geometric redshift" derived from the angles between the three lensed images of MACS0647-JD, using our free-form mass model (WSLAP+) for the lensing cluster MACSJ0647.7+7015 (at $z=0.591$). Our lens model uses the 9 sets of multiple images, including those of MACS0647-JD, identified by the CLASH survey towards this cluster. We convincingly exclude the low redshift regime of $z<3$, for which convoluted critical curves are generated by our method, as the solution bends to accommodate the wide angles of MACS0647-JD for this low redshift. Instead, a best fit to all sets of lensed galaxy positions and redshifts provides a geometric redshift of $z\\simeq 10.8^{+...

  16. My Six- Months Internship in "The Dragon"

    Institute of Scientific and Technical Information of China (English)

    程婧莹

    2011-01-01

    @@ In order to complete my first year at SHMS Caux I was required to fulfil a six-months internship in the hotel.I have chosen to work in the "Dragon Hotel".I had the pleasure of having my first year internship there.All the things for me is fresh and strange.I faced many difficulties and problems while I was doing my internship.

  17. First test of the dragon equipment

    Directory of Open Access Journals (Sweden)

    V. V. Voitsekhovich

    2005-01-01

    Full Text Available El equipo DRAGON constituye un nuevo instrumento astronómico diseñado para llevar a cabo diversas investigaciones relacionadas con óptica adaptativa, óptica activa, astronomía observacional e instrumentación astronómica. En este artículo presentamos los resultados de las primeras pruebas de este instrumento llevadas a cabo en el OAN-Tonantzintla (México.

  18. Specification of Instrumentation of Multi MW Wave Dragon Offshore Wave Energy Converter

    DEFF Research Database (Denmark)

    Gilling, Lasse; Kofoed, Jens Peter

    Wave Dragon is a wave energy converter of the overtopping type and is described e.g. in Tedd et. al. (2006). The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the exp......Wave Dragon is a wave energy converter of the overtopping type and is described e.g. in Tedd et. al. (2006). The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based...

  19. Measuring radiative capture rates at DRAGON

    Science.gov (United States)

    Hager, U.; Davids, B.; Fallis, J.; Greife, U.; Hutcheon, D. A.; Rojas, A.; Ruiz, C.

    2013-04-01

    The DRAGON recoil separator facility is located at the ISAC facility at TRIUMF, Vancouver. It is designed to measure radiative alpha and proton capture reactions of astrophysical importance in inverse kinematics. The Supernanogan ion source at ISAC provides stable beams of high intensities. The DRAGON collaboration has taken advantage of this over the last years by measuring several reactions requiring high-intensity stable oxygen beams. In particular,the ^17O(p,γ) and ^16O(α,γ) reaction rates were recently measured. The former reaction is part of the hot CNO cycle, and strongly influences the abundance of ^18F in classical novae. Because of its relatively long lifetime, ^18F is a possible target for satellite-based gamma-ray spectroscopy. The ^16O(α,γ) reaction plays a role in steady-state helium burning in massive stars, where it follows the ^12C(α,γ) reaction. At astrophysically relevant energies, the reaction proceeds exclusively via direct capture, resulting in a low rate. In both cases, the unique capabilities of DRAGON enabled determination not only of the total reaction rates, but also of decay branching ratios. Results from both experiments will be presented.

  20. Non-cyclic Geometric Phase In Stochastic Processes: Corrections To Michaelis-menten Kinetics And Applications To A Cell Growth Model

    Energy Technology Data Exchange (ETDEWEB)

    Sinitsyn, Nikolai A [Los Alamos National Laboratory

    2008-01-01

    We generalize the concept of the geometric phase in stochastic kinetics to a noncyclic evolution. Its application is demonstrated on kinetics of the Michaelis-Menten reaction. It is shown that the noncyclic geometric phase is responsible for the correction to the Michaelis-Menten law when parameters, such as a substrate concentration, are changing with time. We also discuss a model, where this correction qualitatively changes the outcome of reaction kinetics.

  1. Geometric free energy of toric AdS4/CFT3 models

    CERN Document Server

    Lee, Sangmin

    2014-01-01

    We study the supersymmetric free energy of three dimensional Chern-Simons-matter theories holographically dual to AdS$_4$ times toric Sasaki-Einstein seven-manifolds. In the large $N$ limit, we argue that the square of the free energy can be written as a quartic polynomial of trial R-charges. The coefficients of the polynomial are determined geometrically from the toric diagrams. We present the coefficients of the quartic polynomial explicitly for generic toric diagrams with up to 6 vertices, and some particular diagrams with 8 vertices. Decomposing the trial R-charges into mesonic and baryonic variables, and eliminating the baryonic ones, we show that the quartic polynomial reproduces the inverse of the Martelli-Sparks-Yau volume function. On the gravity side, we explore the possibility of using the same quartic polynomial as the prepotential in the AdS gauged supergravity. Comparing Kaluza-Klein gravity and gauged supergravity descriptions, we find perfect agreement in the mesonic sector but some discrepanc...

  2. Sharpness in the k-nearest neighbours random geometric graph model

    CERN Document Server

    Falgas-Ravry, Victor

    2011-01-01

    Let $S_{n,k}$ denote the random geometric graph obtained by placing points in a square box of area $n$ according to a Poisson process of intensity $1$ and joining each point to its $k$ nearest neighbours. Balister, Bollob\\'as, Sarkar and Walters conjectured that for every $0< \\epsilon <1$ and all $n$ sufficiently large there exists $C=C(\\epsilon)$ such that whenever the probability $S_{n,k}$ is connected is at least $\\epsilon $ then the probability $S_{n,k+C}$ is connected is at least $1-\\epsilon $. In this paper we prove this conjecture. As a corollary we prove that there is a constant $C'$ such that whenever $k=k(n)$ is a sequence of integers such that the probability $S_{n,k(n)}$ is connected tends to one as $n$ tends to infinity, then for any $s(n)$ with $s(n)=o(\\log n)$, the probability that $S_{n,k(n)+C's\\log \\log n}$ is $s$-connected tends to one This proves another conjecture of Balister, Bollob\\'as, Sarkar and Walters.

  3. Geometric free energy of toric AdS{sub 4}/CFT{sub 3} models

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sangmin [Center for Theoretical Physics, Seoul National University,Seoul 151-747 (Korea, Republic of); Department of Physics and Astronomy, Seoul National University,Seoul 151-747 (Korea, Republic of); College of Liberal Studies, Seoul National University,Seoul 151-742 (Korea, Republic of); School of Physics, Korea Institute for Advanced Study,Seoul 130-722 (Korea, Republic of); Yokoyama, Daisuke [Center for Theoretical Physics, Seoul National University,Seoul 151-747 (Korea, Republic of)

    2015-03-19

    We study the supersymmetric free energy of three dimensional Chern-Simons-matter theories holographically dual to AdS{sub 4} times toric Sasaki-Einstein seven-manifolds. In the large N limit, we argue that the square of the free energy can be written as a quartic polynomial of trial R-charges. The coefficients of the polynomial are determined geometrically from the toric diagrams. We present the coefficients of the quartic polynomial explicitly for generic toric diagrams with up to 6 vertices, and some particular diagrams with 8 vertices. Decomposing the trial R-charges into mesonic and baryonic variables, and eliminating the baryonic ones, we show that the quartic polynomial reproduces the inverse of the Martelli-Sparks-Yau volume function. On the gravity side, we explore the possibility of using the same quartic polynomial as the prepotential in the AdS gauged supergravity. Comparing Kaluza-Klein gravity and gauged supergravity descriptions, we find perfect agreement in the mesonic sector but some discrepancy in the baryonic sector.

  4. Overtopping Measurements on the Wave Dragon Nissum Bredning Prototype

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter; Rasmussen, Michael R.

    2004-01-01

    The paper describes the methods used to estimate (calculated from some indirect measurements) the overtopping of the wave energy converter Wave Dragon placed in a real sea environment. The wave energy converter in quistion is the 237-tonne heavy Wave Dragon Nissum Bredning Prototype. Comparisons...

  5. General models for the spectra of surface area scaling strategies of cells and organisms: fractality, geometric dissimilitude, and internalization.

    Science.gov (United States)

    Okie, Jordan G

    2013-03-01

    Surface areas and volumes of biological systems-from molecules to organelles, cells, and organisms-affect their biological rates and kinetics. Therefore, surface area-to-volume ratios and the scaling of surface area with volume profoundly influence ecology, physiology, and evolution. The zeroth-order geometric expectation is that surface area scales with body mass or volume as a power law with an exponent of two-thirds, with consequences for surface area-to-volume (SA : V) ratios and constraints on size; however, organisms have adaptations for altering the surface area scaling and SA : V ratios of their bodies and structures. The strategies fall into three groups: (1) fractal-like surface convolutions and crinkles; (2) classic geometric dissimilitude through elongating, flattening, fattening, and hollowing; and (3) internalization of surfaces. Here I develop general quantitative theory to model the spectra of effects of these strategies on SA : V ratios and surface area scaling, from exponents of less than two-thirds to superlinear scaling and mixed-power laws. Applying the theory to cells helps quantitatively evaluate the effects of membrane fractality, shape-shifting, vacuoles, vesicles, and mitochondria on surface area scaling, informing understanding of cell allometry, morphology, and evolution. Analysis of compiled data indicates that through hollowness and surface internalization, eukaryotic phytoplankton increase their effective surface area scaling, attaining near-linear scaling in larger cells. This unifying theory highlights the fundamental role of biological surfaces in metabolism and morphological evolution.

  6. Enhanced Geometric Map:a 2D & 3D Hybrid City Model of Large Scale Urban Environment for Robot Navigation

    Institute of Scientific and Technical Information of China (English)

    LI Haifeng; HU Zunhe; LIU Jingtai

    2016-01-01

    To facilitate scene understanding and robot navigation in large scale urban environment, a two-layer enhanced geometric map (EGMap) is designed using videos from a monocular onboard camera. The 2D layer of EGMap consists of a 2D building boundary map from top-down view and a 2D road map, which can support localization and advanced map-matching when compared with standard polyline-based maps. The 3D layer includes features such as 3D road model, and building facades with coplanar 3D vertical and horizontal line segments, which can provide the 3D metric features to localize the vehicles and flying-robots in 3D space. Starting from the 2D building boundary and road map, EGMap is initially constructed using feature fusion with geometric constraints under a line feature-based simultaneous localization and mapping (SLAM) framework iteratively and progressively. Then, a local bundle adjustment algorithm is proposed to jointly refine the camera localizations and EGMap features. Furthermore, the issues of uncertainty, memory use, time efficiency and obstacle effect in EGMap construction are discussed and analyzed. Physical experiments show that EGMap can be successfully constructed in large scale urban environment and the construction method is demonstrated to be very accurate and robust.

  7. Horizontal geometrical reaction time model for two-beam nacelle LiDARs

    Science.gov (United States)

    Beuth, Thorsten; Fox, Maik; Stork, Wilhelm

    2015-06-01

    Wind energy is one of the leading sustainable energies. To attract further private and state investment in this technology, a broad scaled drop of the cost of energy has to be enforced. There is a trend towards using Laser Doppler Velocimetry LiDAR systems for enhancing power output and minimizing downtimes, fatigue and extreme forces. Since most used LiDARs are horizontally setup on a nacelle and work with two beams, it is important to understand the geometrical configuration which is crucial to estimate reaction times for the actuators to compensate wind gusts. In the beginning of this article, the basic operating modes of wind turbines are explained and the literature on wind behavior is analyzed to derive specific wind speed and wind angle conditions in relation to the yaw angle of the hub. A short introduction to the requirements for the reconstruction of the wind vector length and wind angle leads to the problem of wind shear detection of angled but horizontal homogeneous wind fronts due to the spatial separation of the measuring points. A distance is defined in which the wind shear of such homogeneous wind fronts is not present which is used as a base to estimate further distance calculations. The reaction time of the controller and the actuators are having a negative effect on the effective overall reaction time for wind regulation as well. In the end, exemplary calculations estimate benefits and disadvantages of system parameters for wind gust regulating LiDARs for a wind turbine of typical size. An outlook shows possible future improvements concerning the vertical wind behavior.

  8. RAINDROPS FROM MOTIONLESS CLOUD USING PROPORTIONALITY AND GEOMETRIC SIMILARITY IN MATHEMATICAL MODELING

    OpenAIRE

    Dr. S. Jayakumar; Geetha, S.

    2017-01-01

    Mathematical Model is an idealization of the real world Phenomenon and never a completely accurate representation. Any Model has its limitations a good one can provide valuable results and conclusions. Mathematical Model as a mathematical construct designed to study a particular real world systems or behavior of Interest. The Model allows us to reach mathematical conclusions about the behavior; These conclusions can be interpreted to help a decision maker plan for the future. Most models simp...

  9. Melt extraction and mantle source at a Southwest Indian Ridge Dragon Bone amagmatic segment on the Marion Rise

    Science.gov (United States)

    Gao, Changgui; Dick, Henry J. B.; Liu, Yang; Zhou, Huaiyang

    2016-03-01

    This paper works on the trace and major element compositions of spatially associated basalts and peridotites from the Dragon Bone amagmatic ridge segment at the eastern flank of the Marion Platform on the ultraslow spreading Southwest Indian Ridge. The rare earth element compositions of basalts do not match the pre-alteration Dragon Bone peridotite compositions, but can be modeled by about 5 to 10% non-modal batch equilibrium melting from a DMM source. The Dragon Bone peridotites are clinopyroxene-poor harzburgite with average spinel Cr# ~ 27.7. The spinel Cr# indicates a moderate degree of melting. However, CaO and Al2O3 of the peridotites are lower than other abyssal peridotites at the same Mg# and extent of melting. This requires a pyroxene-poor initial mantle source composition compared to either hypothetical primitive upper mantle or depleted MORB mantle sources. We suggest a hydrous melting of the initial Dragon Bone mantle source, as wet melting depletes pyroxene faster than dry. According to the rare earth element patterns, the Dragon Bone peridotites are divided into two groups. Heavy REE in Group 1 are extremely fractionated from middle REE, which can be modeled by ~ 7% fractional melting in the garnet stability field and another ~ 12.5 to 13.5% in the spinel stability field from depleted and primitive upper mantle sources, respectively. Heavy REE in Group 2 are slightly fractionated from middle REE, which can be modeled by ~ 15 to 20% fractional melting in the spinel stability field from a depleted mantle source. Both groups show similar melting degree to other abyssal peridotites. If all the melt extraction occurred at the middle oceanic ridge where the peridotites were dredged, a normal ~ 6 km thick oceanic crust is expected at the Dragon Bone segment. However, the Dragon Bone peridotites are exposed in an amagmatic ridge segment where only scattered pillow basalts lie on a partially serpentinized mantle pavement. Thus their depletion requires an

  10. Can camera traps monitor Komodo dragons a large ectothermic predator?

    Directory of Open Access Journals (Sweden)

    Achmad Ariefiandy

    Full Text Available Camera trapping has greatly enhanced population monitoring of often cryptic and low abundance apex carnivores. Effectiveness of passive infrared camera trapping, and ultimately population monitoring, relies on temperature mediated differences between the animal and its ambient environment to ensure good camera detection. In ectothermic predators such as large varanid lizards, this criterion is presumed less certain. Here we evaluated the effectiveness of camera trapping to potentially monitor the population status of the Komodo dragon (Varanus komodoensis, an apex predator, using site occupancy approaches. We compared site-specific estimates of site occupancy and detection derived using camera traps and cage traps at 181 trapping locations established across six sites on four islands within Komodo National Park, Eastern Indonesia. Detection and site occupancy at each site were estimated using eight competing models that considered site-specific variation in occupancy (ψand varied detection probabilities (p according to detection method, site and survey number using a single season site occupancy modelling approach. The most parsimonious model [ψ (site, p (site survey; ω = 0.74] suggested that site occupancy estimates differed among sites. Detection probability varied as an interaction between site and survey number. Our results indicate that overall camera traps produced similar estimates of detection and site occupancy to cage traps, irrespective of being paired, or unpaired, with cage traps. Whilst one site showed some evidence detection was affected by trapping method detection was too low to produce an accurate occupancy estimate. Overall, as camera trapping is logistically more feasible it may provide, with further validation, an alternative method for evaluating long-term site occupancy patterns in Komodo dragons, and potentially other large reptiles, aiding conservation of this species.

  11. Can camera traps monitor Komodo dragons a large ectothermic predator?

    Science.gov (United States)

    Ariefiandy, Achmad; Purwandana, Deni; Seno, Aganto; Ciofi, Claudio; Jessop, Tim S

    2013-01-01

    Camera trapping has greatly enhanced population monitoring of often cryptic and low abundance apex carnivores. Effectiveness of passive infrared camera trapping, and ultimately population monitoring, relies on temperature mediated differences between the animal and its ambient environment to ensure good camera detection. In ectothermic predators such as large varanid lizards, this criterion is presumed less certain. Here we evaluated the effectiveness of camera trapping to potentially monitor the population status of the Komodo dragon (Varanus komodoensis), an apex predator, using site occupancy approaches. We compared site-specific estimates of site occupancy and detection derived using camera traps and cage traps at 181 trapping locations established across six sites on four islands within Komodo National Park, Eastern Indonesia. Detection and site occupancy at each site were estimated using eight competing models that considered site-specific variation in occupancy (ψ)and varied detection probabilities (p) according to detection method, site and survey number using a single season site occupancy modelling approach. The most parsimonious model [ψ (site), p (site survey); ω = 0.74] suggested that site occupancy estimates differed among sites. Detection probability varied as an interaction between site and survey number. Our results indicate that overall camera traps produced similar estimates of detection and site occupancy to cage traps, irrespective of being paired, or unpaired, with cage traps. Whilst one site showed some evidence detection was affected by trapping method detection was too low to produce an accurate occupancy estimate. Overall, as camera trapping is logistically more feasible it may provide, with further validation, an alternative method for evaluating long-term site occupancy patterns in Komodo dragons, and potentially other large reptiles, aiding conservation of this species.

  12. Geometric Modeling Applications Interface Program. Schema Manager User’s Manual

    Science.gov (United States)

    1990-11-01

    Standard, Product Definition Data Interface (PDDI), Project 5601, Contract F33516-82-5036, July 1984. Information Modeling Manual IDEF-Extended ( IDEFIX ...Englewood Cliffs, N.J. Differential Geometry of Curves and Surfaces, M. P. de Carmo, Prentice-Hall, Inc., 1976. IDEFIX Readers Reference, D. Appleton...IDEF Information Modeling. IDEFIX -IDEF Extended Information Modeling. IDEF2 -IDEF Dynamics Modeling. IDSS - Integrated Decision Support System

  13. Patient-specific geometrical modeling of orthopedic structures with high efficiency and accuracy for finite element modeling and 3D printing.

    Science.gov (United States)

    Huang, Huajun; Xiang, Chunling; Zeng, Canjun; Ouyang, Hanbin; Wong, Kelvin Kian Loong; Huang, Wenhua

    2015-12-01

    We improved the geometrical modeling procedure for fast and accurate reconstruction of orthopedic structures. This procedure consists of medical image segmentation, three-dimensional geometrical reconstruction, and assignment of material properties. The patient-specific orthopedic structures reconstructed by this improved procedure can be used in the virtual surgical planning, 3D printing of real orthopedic structures and finite element analysis. A conventional modeling consists of: image segmentation, geometrical reconstruction, mesh generation, and assignment of material properties. The present study modified the conventional method to enhance software operating procedures. Patient's CT images of different bones were acquired and subsequently reconstructed to give models. The reconstruction procedures were three-dimensional image segmentation, modification of the edge length and quantity of meshes, and the assignment of material properties according to the intensity of gravy value. We compared the performance of our procedures to the conventional procedures modeling in terms of software operating time, success rate and mesh quality. Our proposed framework has the following improvements in the geometrical modeling: (1) processing time: (femur: 87.16 ± 5.90 %; pelvis: 80.16 ± 7.67 %; thoracic vertebra: 17.81 ± 4.36 %; P < 0.05); (2) least volume reduction (femur: 0.26 ± 0.06 %; pelvis: 0.70 ± 0.47, thoracic vertebra: 3.70 ± 1.75 %; P < 0.01) and (3) mesh quality in terms of aspect ratio (femur: 8.00 ± 7.38 %; pelvis: 17.70 ± 9.82 %; thoracic vertebra: 13.93 ± 9.79 %; P < 0.05) and maximum angle (femur: 4.90 ± 5.28 %; pelvis: 17.20 ± 19.29 %; thoracic vertebra: 3.86 ± 3.82 %; P < 0.05). Our proposed patient-specific geometrical modeling requires less operating time and workload, but the orthopedic structures were generated at a higher rate of success as compared with the conventional method. It is expected to benefit the surgical planning of orthopedic

  14. Stage-structured matrix models for organisms with non-geometric development times

    Science.gov (United States)

    Andrew Birt; Richard M. Feldman; David M. Cairns; Robert N. Coulson; Maria Tchakerian; Weimin Xi; James M. Guldin

    2009-01-01

    Matrix models have been used to model population growth of organisms for many decades. They are popular because of both their conceptual simplicity and their computational efficiency. For some types of organisms they are relatively accurate in predicting population growth; however, for others the matrix approach does not adequately model...

  15. Simulation of Reactors for Antineutrino Experiments Using DRAGON

    CERN Document Server

    Winslow, L

    2011-01-01

    From the discovery of the neutrino to the precision neutrino oscillation measurements in KamLAND, nuclear reactors have proven to be an important source of antineutrinos. As their power and our knowledge of neutrino physics has increased, more sensitive measurements have become possible. The next generation of reactor antineutrino experiments require more detailed simulations of the reactor core. Many of the reactor simulation codes are proprietary which makes detailed studies difficult. Here we present the results of the open source DRAGON code and compare it to other industry standards for reactor modeling. We use published data from the Takahama reactor to determine the quality of the simulations. The propagation of the uncertainty to the antineutrino flux is also discussed.

  16. Cosmic-ray propagation with DRAGON2: I. numerical solver and astrophysical ingredients

    CERN Document Server

    Evoli, Carmelo; Vittino, Andrea; Di Bernardo, Giuseppe; Di Mauro, Mattia; Ligorini, Arianna; Ullio, Piero; Grasso, Dario

    2016-01-01

    We present version 2 of the DRAGON code designed for computing realistic predictions of the CR densities in the Galaxy. The code numerically solves the interstellar CR transport equation (including inhomogeneous and anisotropic diffusion, either in space and momentum, advective transport and energy losses), under realistic conditions. The new version includes an updated numerical solver and several models for the astrophysical ingredients involved in the transport equation. Improvements in the accuracy of the numerical solution are proved against analytical solutions and in reference diffusion scenarios. The novel features implemented in the code allow to simulate the diverse scenarios proposed to reproduce the most recent measurements of local and diffuse CR fluxes, going beyond the limitations of the homogeneous galactic transport paradigm. To this end, several applications using DRAGON2 are presented as well. The new version facilitates the users to include their own physical models by means of a modular C...

  17. Cosmic-ray propagation with DRAGON2: I. numerical solver and astrophysical ingredients

    Science.gov (United States)

    Evoli, Carmelo; Gaggero, Daniele; Vittino, Andrea; Di Bernardo, Giuseppe; Di Mauro, Mattia; Ligorini, Arianna; Ullio, Piero; Grasso, Dario

    2017-02-01

    We present version 2 of the DRAGON code designed for computing realistic predictions of the CR densities in the Galaxy. The code numerically solves the interstellar CR transport equation (including inhomogeneous and anisotropic diffusion, either in space and momentum, advective transport and energy losses), under realistic conditions. The new version includes an updated numerical solver and several models for the astrophysical ingredients involved in the transport equation. Improvements in the accuracy of the numerical solution are proved against analytical solutions and in reference diffusion scenarios. The novel features implemented in the code allow to simulate the diverse scenarios proposed to reproduce the most recent measurements of local and diffuse CR fluxes, going beyond the limitations of the homogeneous galactic transport paradigm. To this end, several applications using DRAGON2 are presented as well. This new version facilitates the users to include their own physical models by means of a modular C++ structure.

  18. Helicopter Rotor Load Prediction Using a Geometrically Exact Beam with Multicomponent Model

    DEFF Research Database (Denmark)

    Lee, Hyun-Ku; Viswamurthy, S.R.; Park, Sang Chul

    2010-01-01

    rotor-blade/control-system model was loosely coupled with various inflow and wake models in order to simulate both hover and forward-flight conditions. The resulting rotor blade response and pitch link loads are in good agreement with those predicted byCAMRADII. The present analysis features both model......In this paper, an accurate structural dynamic analysis was developed for a helicopter rotor system including rotor control components, which was coupled to various aerodynamic and wake models in order to predict an aeroelastic response and the loads acting on the rotor. Its blade analysis was based...... on an intrinsic formulation of moving beams implemented in the time domain. The rotor control system was modeled as a combination of rigid and elastic components. A multicomponent analysis was then developed by coupling the beam finite element model with the rotor control system model to obtain a complete rotor-blade/control...

  19. A geometric Model for the Spatial Correlation of an Acoustic Vector Field in Surface-generated Noise

    Institute of Scientific and Technical Information of China (English)

    Yiwang Huang; Qunyan Ren; Ting Li

    2012-01-01

    Spatial correlation of sound pressure and particle velocity of the surface noise in horizontally stratified media was demonstrated,with directional noise sources uniformly distributed on the ocean surface.In the evaluation of particle velocity,plane wave approximation was applied to each incident ray.Due to the equivalence of the sound source correlation property and its directivity,solutions for the spatial correlation of the field were transformed into the integration of the coherent function generated by a single directional source.As a typical horizontally stratified media,surface noise in a perfect waveguide was investigated.Correlation coefficients given by normal mode and geometric models show satisfactory agreement.Also,the normalized covariance between sound pressure and the vertical component of particle velocity is proportional to acoustic absorption coefficient,while that of the surface noise in semi-infinitely homogeneous space is zero.

  20. Constrained Probabilistic Economic Order Quantity Model under Varying Order Cost and Zero Lead Time Via Geometric Programming

    Directory of Open Access Journals (Sweden)

    Kotb A.E.H.M. Kotb

    2011-01-01

    Full Text Available Problem statement: In this study, we provide a simple method to determine the inventory policy of probabilistic single-item Economic Order Quantity (EOQ model, that has varying order cost and zero lead time. The model is restricted to the expected holding cost and the expected available limited storage space. Approach: The annual expected total cost is composed of three components (expected purchase cost, expected ordering cost and expected holding cost. The problem is then solved using a modified Geometric Programming method (GP. Results: Using the annual expected total cost to determine the optimal solutions, number of periods, maximum inventory level and minimum expected total cost per period. A classical model is derived and numerical example is solved to confirm the model. Conclusion/Recommendations: The results indicated the total cost decreased with changes in optimal solutions. Possible future extension of this model was include continuous decreasing ordering function of the number of periods and introducing expected annual demand rate as a decision variable.

  1. Narrative, Visual Model and Dragon Culture: A Narrative Analysis of Value Presentation in Two Movies Preferred by Chinese Adolescents. Research Bulletin 98.

    Science.gov (United States)

    Jin, He

    A narrative study was conducted of the visual models in two movies preferred by Chinese adolescents in two schools (n=152). The two movies studied were "Three Decisive Campaigns" (A Chinese Trilogy) and the American science fiction movie, "Jurassic Park." The modified approach from Bandura's modeling theory and film semiotics…

  2. A method for geometric modelling of magnetic anomalies: Two dimensional bodies

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, T.C.S.

    for bodies of different shapes. A procedure has been evolved to compute the anomalies for all types of step and dyke models from a single formula by suitably reorienting the 'step model and by redefining its edges and the slope or dip angle. This method also...

  3. The Geometrization of Matter Proposal in the Barrett-Crane Model and Resolution of Cosmological Problems

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, Stephon

    2003-07-15

    We give an overview of the current issues in early universe cosmology and consider the potential resolution of these issues in an as yet nascent spin foam cosmology. The model is the Barrett-Crane Model for quantum gravity along with a generalization of manifold complexes to complexes including conical singularities.

  4. On equivalent radius of curvature for PWL geometrical modeling a loop antenna

    CSIR Research Space (South Africa)

    Lysko, AA

    2012-11-01

    Full Text Available A circular loop antenna is often numerically modeled using a regular polygon. This approach is simple and robust, yet it alters the circumference of the loop and may thus shift the resonance frequency in the numerical model. This letter introduces a...

  5. Inquiry Based Learning and Meaning Generation through Modelling on Geometrical Optics in a Constructionist Environment

    Science.gov (United States)

    Kotsari, Constantina; Smyrnaiou, Zacharoula

    2017-01-01

    The central roles that modelling plays in the processes of scientific enquiry and that models play as the outcomes of that enquiry are well established (Gilbert & Boulter, 1998). Besides, there are considerable similarities between the processes and outcomes of science and technology (Cinar, 2016). In this study, we discuss how the use of…

  6. Scale effects and scaling-up by geometric-optical model

    Institute of Scientific and Technical Information of China (English)

    李小文; 王锦地; A.H.Strahler

    2000-01-01

    This is a follow-up paper to our "Scale effect of Planck’s law over nonisothermal blackbody surface". More examples are used to describe the scale effect in detail, and the scaling-up of Planck law over blackbody surface is further extended to three-dimension nonisothermal surface. This scaling-up results in a conceptual model for the directionality and spectral signature of thermal radiation at the scale of remote sensing pixels. This new model is also an improvement of Li-Strahler-Friedl conceptual model in a sense that the new model needs only statistic parameters at the pixel scale, without request of sub-pixel scale parameters as the LSF model does.

  7. Scale effects and scaling-up by geometric-optical model

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This is a follow-up paper to our "Scale effect of Planck's law over nonisothermal blackbody surface".More examples are used to describe the scale effect in detail,and the scaling-up of Planck law over blackbody surface is further extended to three-dimension nonisothermal surface.This scaling-up results in a conceptual model for the directionality and spectral signature of thermal radiation at the scale of remote sensing pixels.This new model is also an improvement of Li-Strahler-Friedl conceptual model in a sense that the new model needs only statistic parameters at the pixel scale,without request of sub-pixel scale parameters as the LSF model does.

  8. Development of advanced geometric models and acceleration techniques for Monte Carlo simulation in Medical Physics

    OpenAIRE

    Badal Soler, Andreu

    2008-01-01

    Els programes de simulació Monte Carlo de caràcter general s'utilitzen actualment en una gran varietat d'aplicacions.Tot i això, els models geomètrics implementats en la majoria de programes imposen certes limitacions a la forma dels objectes que es poden definir. Aquests models no són adequats per descriure les superfícies arbitràries que es troben en estructures anatòmiques o en certs aparells mèdics i, conseqüentment, algunes aplicacions que requereixen l'ús de models geomètrics molt detal...

  9. Scaling-based forest structural change detection using an inverted geometric-optical model in the Three Gorges region of China

    NARCIS (Netherlands)

    Zeng, Y.; Schaepman, M.E.; Wu, B.; Clevers, J.G.P.W.; Bregt, A.K.

    2008-01-01

    We use the Li-Strahler geometric-optical model combined with a scaling-based approach to detect forest structural changes in the Three Gorges region of China. The physical-based Li-Strahler model can be inverted to retrieve forest structural properties. One of the main input variables for the invert

  10. Towards Geometric D6-Brane Model Building on non-Factorisable Toroidal $\\mathbb{Z}_4$-Orbifolds

    CERN Document Server

    Berasaluce-González, Mikel; Seifert, Alexander

    2016-01-01

    We present a geometric approach to D-brane model building on the non-factorisable torus backgrounds of $T^6/\\mathbb{Z}_4$, which are $A_3 \\times A_3$ and $A_3 \\times A_1 \\times B_2$. Based on the counting of `short' supersymmetric three-cycles per complex structure {\\it vev}, the number of physically inequivalent lattice orientations with respect to the anti-holomorphic involution ${\\cal R}$ of the Type IIA/$\\Omega\\cal{R}$ orientifold can be reduced to three for the $A_3 \\times A_3$ lattice and four for the $A_3 \\times A_1 \\times B_2$ lattice. While four independent three-cycles on $A_3 \\times A_3$ cannot accommodate phenomenologically interesting global models with a chiral spectrum, the eight-dimensional space of three-cycles on $A_3 \\times A_1 \\times B_2$ is rich enough to provide for particle physics models, with several globally consistent two- and four-generation Pati-Salam models presented here. We further show that for fractional {\\it sLag} three-cycles, the compact geometry can be rewritten in a $(T^...

  11. Wave Induced Stresses Measured at the Wave Dragon Nissum Bredning Prototype

    DEFF Research Database (Denmark)

    Corona, L.; Kofoed, Jens Peter

    2006-01-01

    The paper describes the wave induced loading on the overtopping based wave energy converter Wave Dragon. Focus is put on the junction between the main body and the reflector, also called the "shoulder part", where large cross sectional forces and bending moments acts. There are two main objectives...... for this paper, first to verify the FEM results obtained by Niras, Danish society in charge of the finite element modelling and structural design, and then to make a first experimental fatigue analysis of a particular part of the Wave Dragon. This last part shall be considered as an exercise for the further work...... that is to be done for the fatigue analysis, and which is not part of this paper....

  12. Automated contouring error detection based on supervised geometric attribute distribution models for radiation therapy: A general strategy

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hsin-Chen; Tan, Jun; Dolly, Steven; Kavanaugh, James; Harold Li, H.; Altman, Michael; Gay, Hiram; Thorstad, Wade L.; Mutic, Sasa; Li, Hua, E-mail: huli@radonc.wustl.edu [Department of Radiation Oncology, Washington University, St. Louis, Missouri 63110 (United States); Anastasio, Mark A. [Department of Biomedical Engineering, Washington University, St. Louis, Missouri 63110 (United States); Low, Daniel A. [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, California 90095 (United States)

    2015-02-15

    Purpose: One of the most critical steps in radiation therapy treatment is accurate tumor and critical organ-at-risk (OAR) contouring. Both manual and automated contouring processes are prone to errors and to a large degree of inter- and intraobserver variability. These are often due to the limitations of imaging techniques in visualizing human anatomy as well as to inherent anatomical variability among individuals. Physicians/physicists have to reverify all the radiation therapy contours of every patient before using them for treatment planning, which is tedious, laborious, and still not an error-free process. In this study, the authors developed a general strategy based on novel geometric attribute distribution (GAD) models to automatically detect radiation therapy OAR contouring errors and facilitate the current clinical workflow. Methods: Considering the radiation therapy structures’ geometric attributes (centroid, volume, and shape), the spatial relationship of neighboring structures, as well as anatomical similarity of individual contours among patients, the authors established GAD models to characterize the interstructural centroid and volume variations, and the intrastructural shape variations of each individual structure. The GAD models are scalable and deformable, and constrained by their respective principal attribute variations calculated from training sets with verified OAR contours. A new iterative weighted GAD model-fitting algorithm was developed for contouring error detection. Receiver operating characteristic (ROC) analysis was employed in a unique way to optimize the model parameters to satisfy clinical requirements. A total of forty-four head-and-neck patient cases, each of which includes nine critical OAR contours, were utilized to demonstrate the proposed strategy. Twenty-nine out of these forty-four patient cases were utilized to train the inter- and intrastructural GAD models. These training data and the remaining fifteen testing data sets

  13. CREATING PRODUCT MODELS FROM POINT CLOUD OF CIVIL STRUCTURES BASED ON GEOMETRIC SIMILARITY

    Directory of Open Access Journals (Sweden)

    N. Hidaka

    2015-05-01

    Full Text Available The existing civil structures must be maintained in order to ensure their expected lifelong serviceability. Careful rehabilitation and maintenance planning plays a significant role in that effort. Recently, construction information modelling (CIM techniques, such as product models, are increasingly being used to facilitate structure maintenance. Using this methodology, laser scanning systems can provide point cloud data that are used to produce highly accurate and dense representations of civil structures. However, while numerous methods for creating a single surface exist, part decomposition is required in order to create product models consisting of more than one part. This research aims at the development of a surface reconstruction system that utilizes point cloud data efficiently in order to create complete product models. The research proposes using the application of local shape matching to the input point clouds in order to define a set of representative parts. These representative parts are then polygonized and copied to locations where the same types of parts exist. The results of our experiments show that the proposed method can efficiently create product models using input point cloud data.

  14. 几何模型在线性代数教学中的应用%Application of Geometric Model in Linear Algebra Teaching

    Institute of Scientific and Technical Information of China (English)

    席政军

    2013-01-01

    Through analyzing the relationship between geometric model and linear algebra, this article focuses on the application of geometric model in linear algebra, and discusses the classroom teaching of linear algebra.%本文通过几何模型与线性代数之间的关系,重点讨论几何模型在线性代数中的应用,并对线性代数课堂教学进行了初步探讨。

  15. Development of New Loan Payment Models with Piecewise Geometric Gradient Series

    Directory of Open Access Journals (Sweden)

    Erdal Aydemir

    2014-12-01

    Full Text Available Engineering economics plays an important role in decision making. Also, the cash flows, time value of money and interest rates are the most important research fields in mathematical finance. Generalized formulae obtained from a variety of models with the time value of money and cash flows are inadequate to solve some problems. In this study, a new generalized formulae is considered for the first time and derived from a loan payment model which is a certain number of payment amount determined by customer at the beginning of payment period and the other repayments with piecewise linear gradient series. As a result, some numerical examples with solutions are given for the developed models

  16. Clifford algebras geometric modelling and chain geometries with application in kinematics

    CERN Document Server

    Klawitter, Daniel

    2015-01-01

    After revising known representations of the group of Euclidean displacements Daniel Klawitter gives a comprehensive introduction into Clifford algebras. The Clifford algebra calculus is used to construct new models that allow descriptions of the group of projective transformations and inversions with respect to hyperquadrics. Afterwards, chain geometries over Clifford algebras and their subchain geometries are examined. The author applies this theory and the developed methods to the homogeneous Clifford algebra model corresponding to Euclidean geometry. Moreover, kinematic mappings for special Cayley-Klein geometries are developed. These mappings allow a description of existing kinematic mappings in a unifying framework.  Contents Models and representations of classical groups Clifford algebras, chain geometries over Clifford algebras Kinematic mappings for Pin and Spin groups Cayley-Klein geometries Target Groups Researchers and students in the field of mathematics, physics, and mechanical engineering About...

  17. Modelling the 2013 North Aegean (Greece) seismic sequence: geometrical and frictional constraints, and aftershock probabilities

    Science.gov (United States)

    Karakostas, Vassilis; Papadimitriou, Eleftheria; Gospodinov, Dragomir

    2014-04-01

    The 2013 January 8 Mw 5.8 North Aegean earthquake sequence took place on one of the ENE-WSW trending parallel dextral strike slip fault branches in this area, in the continuation of 1968 large (M = 7.5) rupture. The source mechanism of the main event indicates predominantly strike slip faulting in agreement with what is expected from regional seismotectonics. It was the largest event to have occurred in the area since the establishment of the Hellenic Unified Seismological Network (HUSN), with an adequate number of stations in close distances and full azimuthal coverage, thus providing the chance of an exhaustive analysis of its aftershock sequence. The main shock was followed by a handful of aftershocks with M ≥ 4.0 and tens with M ≥ 3.0. Relocation was performed by using the recordings from HUSN and a proper crustal model for the area, along with time corrections in each station relative to the model used. Investigation of the spatial and temporal behaviour of seismicity revealed possible triggering of adjacent fault segments. Theoretical static stress changes from the main shock give a preliminary explanation for the aftershock distribution aside from the main rupture. The off-fault seismicity is perfectly explained if μ > 0.5 and B = 0.0, evidencing high fault friction. In an attempt to forecast occurrence probabilities of the strong events (Mw ≥ 5.0), estimations were performed following the Restricted Epidemic Type Aftershock Sequence (RETAS) model. The identified best-fitting MOF model was used to execute 1-d forecasts for such aftershocks and follow the probability evolution in time during the sequence. Forecasting was also implemented on the base of a temporal model of aftershock occurrence, different from the modified Omori formula (the ETAS model), which resulted in probability gain (though small) in strong aftershock forecasting for the beginning of the sequence.

  18. Automated reconstruction of neuronal morphology based on local geometrical and global structural models.

    Science.gov (United States)

    Zhao, Ting; Xie, Jun; Amat, Fernando; Clack, Nathan; Ahammad, Parvez; Peng, Hanchuan; Long, Fuhui; Myers, Eugene

    2011-09-01

    Digital reconstruction of neurons from microscope images is an important and challenging problem in neuroscience. In this paper, we propose a model-based method to tackle this problem. We first formulate a model structure, then develop an algorithm for computing it by carefully taking into account morphological characteristics of neurons, as well as the image properties under typical imaging protocols. The method has been tested on the data sets used in the DIADEM competition and produced promising results for four out of the five data sets.

  19. Examining the Relationship between Forces During Stereolithography 3D Printing and Geometric Parameters of the Model

    Directory of Open Access Journals (Sweden)

    Kovalenko Iaroslav

    2016-01-01

    Full Text Available In the case of stereolithography 3D printing technology, detaching formed model from the tank with photopolymer is a lengthy process. Forces, which appear during removing of solid photopolymer layerformed in stereolithography 3D DLP printer, can destroy the built model. In this article the detachment force is measured, obtained results arestatistically analyzed and relation between detach force, area of produced layer and thickness of the layer are verified. Linear dependence between detach force and built area is determined. On the other hand, relation between detach force and thickness of the layer is not confirmed.

  20. A Geometric Model to Teach Nature of Science, Science Practices, and Metacognition

    Science.gov (United States)

    Nyman, Matthew; St. Clair, Tyler

    2016-01-01

    Using the science practice model in science classes for preservice teachers addresses three important aspects of science teacher preparation: teaching the nonlinear nature of scientific process, using scientific practices rather than the ambiguous term "inquiry-based," and emphasizing the process of metacognition as an important tool in…

  1. High-Fidelity Geometric Modeling and Mesh Generation for Mechanics Characterization of Polycrystalline Materials

    Science.gov (United States)

    2015-01-07

    Mesh Generation. Lecture Notes in Computational Vision and Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang. ISBN-10...Modeling and Mesh Generation. Lecture Notes in Computational Vision and Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang... Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang. ISBN-10: 9400742541, ISBN-13: 978-9400742543. 2013. 3. Y. Zhang. Challenges

  2. Going Backward : A Flexible Geometric Approach to Reverse Transformation from Coarse Grained to Atomistic Models

    NARCIS (Netherlands)

    Wassenaar, Tsjerk A.; Pluhackova, Kristyna; Böckmann, Rainer A.; Marrink, Siewert J.; Tieleman, D. Peter

    2014-01-01

    The conversion of coarse-grained to atomistic models is an important step in obtaining insight about atomistic scale processes from coarse-grained simulations. For this process, called backmapping or reverse transformation, several tools are available, but these commonly require libraries of molecul

  3. Influence of Interpersonal Geometrical Variation on Spinal Motion Segment Stiffness Implications for Patient-Specific Modeling

    NARCIS (Netherlands)

    Meijer, Gerdine J. M.; Homminga, Jasper; Veldhuizen, Albert G.; Verkerke, Gijsbertus J.

    2011-01-01

    Study Design. A validated finite element model of an L3-L4 motion segment is used to analyze the effects of interpersonal differences in geometry on spinal stiffness. Objective. The objective of this study is to determine which of the interpersonal variations of the geometry of the spine have a larg

  4. A Geometric Model to Teach Nature of Science, Science Practices, and Metacognition

    Science.gov (United States)

    Nyman, Matthew; St. Clair, Tyler

    2016-01-01

    Using the science practice model in science classes for preservice teachers addresses three important aspects of science teacher preparation: teaching the nonlinear nature of scientific process, using scientific practices rather than the ambiguous term "inquiry-based," and emphasizing the process of metacognition as an important tool in…

  5. 3D GEOMETRIC MODELING AND FINITE ELEMENT ANALYSIS OF “TURBO-COOLER” SUBASSEMBLY

    Directory of Open Access Journals (Sweden)

    EFTIMIE Dorin

    2013-06-01

    Full Text Available 3D design of turbo-cooler subassembly can be optimized by using finite element analysis software NX 7.5. Finite element analysis results are useful for 3D design of this unit. Results can be easily implemented in 3D design in order to optain optimal virtual model that meets the requirements imposed.

  6. Measured body composition and geometrical data of four ``virtual family'' members for thermoregulatory modeling

    Science.gov (United States)

    Xu, Xiaojiang; Rioux, Timothy P.; MacLeod, Tynan; Patel, Tejash; Rome, Maxwell N.; Potter, Adam W.

    2017-03-01

    The purpose of this paper is to develop a database of tissue composition, distribution, volume, surface area, and skin thickness from anatomically correct human models, the virtual family. These models were based on high-resolution magnetic resonance imaging (MRI) of human volunteers, including two adults (male and female) and two children (boy and girl). In the segmented image dataset, each voxel is associated with a label which refers to a tissue type that occupies up that specific cubic millimeter of the body. The tissue volume was calculated from the number of the voxels with the same label. Volumes of 24 organs in body and volumes of 7 tissues in 10 specific body regions were calculated. Surface area was calculated from the collection of voxels that are touching the exterior air. Skin thicknesses were estimated from its volume and surface area. The differences between the calculated and original masses were about 3 % or less for tissues or organs that are important to thermoregulatory modeling, e.g., muscle, skin, and fat. This accurate database of body tissue distributions and geometry is essential for the development of human thermoregulatory models. Data derived from medical imaging provide new effective tools to enhance thermal physiology research and gain deeper insight into the mechanisms of how the human body maintains heat balance.

  7. Measured body composition and geometrical data of four "virtual family" members for thermoregulatory modeling

    Science.gov (United States)

    Xu, Xiaojiang; Rioux, Timothy P.; MacLeod, Tynan; Patel, Tejash; Rome, Maxwell N.; Potter, Adam W.

    2016-08-01

    The purpose of this paper is to develop a database of tissue composition, distribution, volume, surface area, and skin thickness from anatomically correct human models, the virtual family. These models were based on high-resolution magnetic resonance imaging (MRI) of human volunteers, including two adults (male and female) and two children (boy and girl). In the segmented image dataset, each voxel is associated with a label which refers to a tissue type that occupies up that specific cubic millimeter of the body. The tissue volume was calculated from the number of the voxels with the same label. Volumes of 24 organs in body and volumes of 7 tissues in 10 specific body regions were calculated. Surface area was calculated from the collection of voxels that are touching the exterior air. Skin thicknesses were estimated from its volume and surface area. The differences between the calculated and original masses were about 3 % or less for tissues or organs that are important to thermoregulatory modeling, e.g., muscle, skin, and fat. This accurate database of body tissue distributions and geometry is essential for the development of human thermoregulatory models. Data derived from medical imaging provide new effective tools to enhance thermal physiology research and gain deeper insight into the mechanisms of how the human body maintains heat balance.

  8. Epistasis and the Structure of Fitness Landscapes: Are Experimental Fitness Landscapes Compatible with Fisher's Geometric Model?

    Science.gov (United States)

    Blanquart, François; Bataillon, Thomas

    2016-06-01

    The fitness landscape defines the relationship between genotypes and fitness in a given environment and underlies fundamental quantities such as the distribution of selection coefficient and the magnitude and type of epistasis. A better understanding of variation in landscape structure across species and environments is thus necessary to understand and predict how populations will adapt. An increasing number of experiments investigate the properties of fitness landscapes by identifying mutations, constructing genotypes with combinations of these mutations, and measuring the fitness of these genotypes. Yet these empirical landscapes represent a very small sample of the vast space of all possible genotypes, and this sample is often biased by the protocol used to identify mutations. Here we develop a rigorous statistical framework based on Approximate Bayesian Computation to address these concerns and use this flexible framework to fit a broad class of phenotypic fitness models (including Fisher's model) to 26 empirical landscapes representing nine diverse biological systems. Despite uncertainty owing to the small size of most published empirical landscapes, the inferred landscapes have similar structure in similar biological systems. Surprisingly, goodness-of-fit tests reveal that this class of phenotypic models, which has been successful so far in interpreting experimental data, is a plausible in only three of nine biological systems. More precisely, although Fisher's model was able to explain several statistical properties of the landscapes-including the mean and SD of selection and epistasis coefficients-it was often unable to explain the full structure of fitness landscapes.

  9. Are dragon-king neuronal avalanches dungeons for self-organized brain activity?

    Science.gov (United States)

    de Arcangelis, L.

    2012-05-01

    Recent experiments have detected a novel form of spontaneous neuronal activity both in vitro and in vivo: neuronal avalanches. The statistical properties of this activity are typical of critical phenomena, with power laws characterizing the distributions of avalanche size and duration. A critical behaviour for the spontaneous brain activity has important consequences on stimulated activity and learning. Very interestingly, these statistical properties can be altered in significant ways in epilepsy and by pharmacological manipulations. In particular, there can be an increase in the number of large events anticipated by the power law, referred to herein as dragon-king avalanches. This behaviour, as verified by numerical models, can originate from a number of different mechanisms. For instance, it is observed experimentally that the emergence of a critical behaviour depends on the subtle balance between excitatory and inhibitory mechanisms acting in the system. Perturbing this balance, by increasing either synaptic excitation or the incidence of depolarized neuronal up-states causes frequent dragon-king avalanches. Conversely, an unbalanced GABAergic inhibition or long periods of low activity in the network give rise to sub-critical behaviour. Moreover, the existence of power laws, common to other stochastic processes, like earthquakes or solar flares, suggests that correlations are relevant in these phenomena. The dragon-king avalanches may then also be the expression of pathological correlations leading to frequent avalanches encompassing all neurons. We will review the statistics of neuronal avalanches in experimental systems. We then present numerical simulations of a neuronal network model introducing within the self-organized criticality framework ingredients from the physiology of real neurons, as the refractory period, synaptic plasticity and inhibitory synapses. The avalanche critical behaviour and the role of dragon-king avalanches will be discussed in

  10. Modelling the transport of geometrically necessary dislocations on slip systems: application to single- and multi-crystals of ice

    Science.gov (United States)

    Richeton, T.; Le, LT; Chauve, T.; Bernacki, M.; Berbenni, S.; Montagnat, M.

    2017-02-01

    A model based on the elastic theory of continuously distributed dislocations, accounting for the transport of geometrically necessary dislocations (GND) on slip systems is developed. It allows keeping the crystallographic nature of glide by allocating velocities specific to slip systems to GND. At grain boundaries, the dislocation transport equation is resolved between a specific system in a grain and a specific system in the adjacent grain. It is used to simulate a compression creep test followed by unloading of a multiple slip deforming multi-crystal of ice during which kink band formation, grain boundary migration and localized grain nucleation are observed. The model predictions are compared to 2D strain fields obtained by digital image correlation and show a good agreement. Besides, the kink band position corresponds very well with an area of strong lattice misorientation predicted by the model and is also bounded by opposite densities of edge dislocations, in agreement with kink banding theory and characterization. Furthermore, the grain boundary migration is observed to happen from predicted low dislocation density area towards high dislocation ones—also in agreement with the theory. Lastly, the triple junctions where nucleation is observed are also characterized by high GND density and especially strong gradient of elastic energy density. These different features show the relevance of using a continuum theory of polarized dislocations per slip system to study the onset of relaxation mechanisms like kink banding, grain boundary migration and grain nucleation and possibly to propose nucleation and migration criteria.

  11. Life-history and spatial determinants of somatic growth dynamics in Komodo dragon populations.

    Directory of Open Access Journals (Sweden)

    Rebecca J Laver

    Full Text Available Somatic growth patterns represent a major component of organismal fitness and may vary among sexes and populations due to genetic and environmental processes leading to profound differences in life-history and demography. This study considered the ontogenic, sex-specific and spatial dynamics of somatic growth patterns in ten populations of the world's largest lizard the Komodo dragon (Varanus komodoensis. The growth of 400 individual Komodo dragons was measured in a capture-mark-recapture study at ten sites on four islands in eastern Indonesia, from 2002 to 2010. Generalized Additive Mixed Models (GAMMs and information-theoretic methods were used to examine how growth rates varied with size, age and sex, and across and within islands in relation to site-specific prey availability, lizard population density and inbreeding coefficients. Growth trajectories differed significantly with size and between sexes, indicating different energy allocation tactics and overall costs associated with reproduction. This leads to disparities in maximum body sizes and longevity. Spatial variation in growth was strongly supported by a curvilinear density-dependent growth model with highest growth rates occurring at intermediate population densities. Sex-specific trade-offs in growth underpin key differences in Komodo dragon life-history including evidence for high costs of reproduction in females. Further, inverse density-dependent growth may have profound effects on individual and population level processes that influence the demography of this species.

  12. Compensation for geometric modeling errors by positioning of electrodes in electrical impedance tomography

    DEFF Research Database (Denmark)

    Hyvönen, N.; Majander, H.; Staboulis, Stratos

    2017-01-01

    that render reconstructing the internal conductivity impossible if they are not taken into account. This work numerically demonstrates that one can compensate for inaccurate modeling of the object boundary in two spatial dimensions by finding compatible locations and sizes for the electrodes as a part...... of a reconstruction algorithm. The numerical studies, which are based on both simulated and experimental data, are complemented by proving that the employed complete electrode model is approximately conformally invariant, which suggests that the obtained reconstructions in mismodeled domains reflect conformal images......Electrical impedance tomography aims at reconstructing the conductivity inside a physical body from boundary measurements of current and voltage at a finite number of contact electrodes. In many practical applications, the shape of the imaged object is subject to considerable uncertainties...

  13. Compensation for geometric modeling errors by positioning of electrodes in electrical impedance tomography

    Science.gov (United States)

    Hyvönen, N.; Majander, H.; Staboulis, S.

    2017-03-01

    Electrical impedance tomography aims at reconstructing the conductivity inside a physical body from boundary measurements of current and voltage at a finite number of contact electrodes. In many practical applications, the shape of the imaged object is subject to considerable uncertainties that render reconstructing the internal conductivity impossible if they are not taken into account. This work numerically demonstrates that one can compensate for inaccurate modeling of the object boundary in two spatial dimensions by finding compatible locations and sizes for the electrodes as a part of a reconstruction algorithm. The numerical studies, which are based on both simulated and experimental data, are complemented by proving that the employed complete electrode model is approximately conformally invariant, which suggests that the obtained reconstructions in mismodeled domains reflect conformal images of the true targets. The numerical experiments also confirm that a similar approach does not, in general, lead to a functional algorithm in three dimensions.

  14. Parameterization of a geometrical reaction time model for two beam nacelle lidars

    Science.gov (United States)

    Beuth, Thorsten; Fox, Maik; Stork, Wilhelm

    2015-09-01

    The reaction time model is briefly reintroduced as published in a previous publication to explain the restrictions of detecting a horizontal homogenous wind field by two beams of a LiDAR placed on a wind turbine's nacelle. The model is parameterized to get more general statements for a beneficial system design concept. This approach is based on a parameterization towards the rotor disc radius R. All other parameters, whether they are distances like the measuring length or velocities like the cut-out wind speed, can be expressed by the rotor disc radius R. A review of state-of-the-art commercially available wind turbines and their size and rotor diameter is given to estimate the minimum measuring distances that will benefit most wind turbine systems in present as well as in the near future. In the end, the requirements are matched against commercially available LiDARs to show the necessity to advance such systems.

  15. Verification of Geometric Model-Based Plant Phenotyping Methods for Studies of Xerophytic Plants

    Directory of Open Access Journals (Sweden)

    Paweł Drapikowski

    2016-06-01

    Full Text Available This paper presents the results of verification of certain non-contact measurement methods of plant scanning to estimate morphological parameters such as length, width, area, volume of leaves and/or stems on the basis of computer models. The best results in reproducing the shape of scanned objects up to 50 cm in height were obtained with the structured-light DAVID Laserscanner. The optimal triangle mesh resolution for scanned surfaces was determined with the measurement error taken into account. The research suggests that measuring morphological parameters from computer models can supplement or even replace phenotyping with classic methods. Calculating precise values of area and volume makes determination of the S/V (surface/volume ratio for cacti and other succulents possible, whereas for classic methods the result is an approximation only. In addition, the possibility of scanning and measuring plant species which differ in morphology was investigated.

  16. A geometric network model of intrinsic grey-matter connectivity of the human brain

    Science.gov (United States)

    Lo, Yi-Ping; O'Dea, Reuben; Crofts, Jonathan J.; Han, Cheol E.; Kaiser, Marcus

    2015-10-01

    Network science provides a general framework for analysing the large-scale brain networks that naturally arise from modern neuroimaging studies, and a key goal in theoretical neuroscience is to understand the extent to which these neural architectures influence the dynamical processes they sustain. To date, brain network modelling has largely been conducted at the macroscale level (i.e. white-matter tracts), despite growing evidence of the role that local grey matter architecture plays in a variety of brain disorders. Here, we present a new model of intrinsic grey matter connectivity of the human connectome. Importantly, the new model incorporates detailed information on cortical geometry to construct ‘shortcuts’ through the thickness of the cortex, thus enabling spatially distant brain regions, as measured along the cortical surface, to communicate. Our study indicates that structures based on human brain surface information differ significantly, both in terms of their topological network characteristics and activity propagation properties, when compared against a variety of alternative geometries and generative algorithms. In particular, this might help explain histological patterns of grey matter connectivity, highlighting that observed connection distances may have arisen to maximise information processing ability, and that such gains are consistent with (and enhanced by) the presence of short-cut connections.

  17. Linear stochastic systems a geometric approach to modeling, estimation and identification

    CERN Document Server

    Lindquist, Anders

    2015-01-01

    This book presents a treatise on the theory and modeling of second-order stationary processes, including an exposition on selected application areas that are important in the engineering and applied sciences. The foundational issues regarding stationary processes dealt with in the beginning of the book have a long history, starting in the 1940s with the work of Kolmogorov, Wiener, Cramér and his students, in particular Wold, and have since been refined and complemented by many others. Problems concerning the filtering and modeling of stationary random signals and systems have also been addressed and studied, fostered by the advent of modern digital computers, since the fundamental work of R.E. Kalman in the early 1960s. The book offers a unified and logically consistent view of the subject based on simple ideas from Hilbert space geometry and coordinate-free thinking. In this framework, the concepts of stochastic state space and state space modeling, based on the notion of the conditional independence of pas...

  18. Transmuted Complementary Weibull Geometric Distribution

    Directory of Open Access Journals (Sweden)

    Ahmed Z. A…fify

    2014-12-01

    Full Text Available This paper provides a new generalization of the complementary Weibull geometric distribution that introduced by Tojeiro et al. (2014, using the quadratic rank transmutation map studied by Shaw and Buckley (2007. The new distribution is referred to as transmuted complementary Weibull geometric distribution (TCWGD. The TCWG distribution includes as special cases the complementary Weibull geometric distribution (CWGD, complementary exponential geometric distribution(CEGD,Weibull distribution (WD and exponential distribution (ED. Various structural properties of the new distribution including moments, quantiles, moment generating function and RØnyi entropy of the subject distribution are derived. We proposed the method of maximum likelihood for estimating the model parameters and obtain the observed information matrix. A real data set are used to compare the ‡exibility of the transmuted version versus the complementary Weibull geometric distribution.

  19. Three-dimensional Simulation and Pattern Making of Collar Using Geometric Model

    Institute of Scientific and Technical Information of China (English)

    Zhang Mingjie(张明杰); Hou Dongyu(侯东昱); Zhou Aiying(周爱英); Yoshio Shimizu

    2001-01-01

    An algorithm is presented for computationally simulating collars and drafting patterns. The collar shape was modeled by three-dimensional Bezier patch. Changing the position of consol points of the patch can interactively control the collar shape. Using triangular surface developing method, patterns of various styles of stand collar and separating collar were drafted. As the subsystem of 3D apparel design system, an interactive collar design system is constructed. To inspect the practical usage, we reproduced the collars using these patterns drafted by the interactive collar design system.Comparing with simulated collars, the system demonstrated well and we found it is more reliable and accurate than the method of handwork.

  20. Geometric theory of information

    CERN Document Server

    2014-01-01

    This book brings together geometric tools and their applications for Information analysis. It collects current and many uses of in the interdisciplinary fields of Information Geometry Manifolds in Advanced Signal, Image & Video Processing, Complex Data Modeling and Analysis, Information Ranking and Retrieval, Coding, Cognitive Systems, Optimal Control, Statistics on Manifolds, Machine Learning, Speech/sound recognition, and natural language treatment which are also substantially relevant for the industry.