WorldWideScience

Sample records for dpg spring meeting

  1. Spring meeting of the DPG Working Group 'Solid state physics'

    International Nuclear Information System (INIS)

    1996-01-01

    The volume contains abstracts of the contributions to the Spring Meeting of the Solid State Physics Section with the topics dielectric solids, thin films, dynamics and statistical physics, semiconductor physics, magnetism, metal physics, surface physics, low temperature physics, vacuum physics and engineering, chemical physics. (MM)

  2. Highlights: Spring Council Meeting

    Science.gov (United States)

    Council members present at the May 24, 1981, meeting were Keiiti Aki, Steven Burges (for Jim Wallis), Peter S. Eagleson, E. R. Engdahl, Charles E. Helsley, James R. Heirtzler, Carl Kisslinger, Leslie H. Meredith, Chris N. K. Mooers, Norman F. Ness, Marcia M. Neugebauer, James J. O'Brien, Richard Rapp, Carl Sagan, James C. Savage, Joseph V. Smith, Fred Spilhaus, Donald L. Turcotte, James A. Van Allen, J. Tuzo Wilson, and Jay Winston (for Elmar R. Reiter until his arrival at 6:50 P.M.). David Strangway, representing the Canadian Geophysical Union, and Peter Steinhauser, representing the European Geophysical Society, were special observers at the meeting. Council meetings are open, and a number of section secretaries, committee chairmen, journal editors, and other members attended. The following major actions were adopted by the Council:The experiment of publishing oceanography and lower-atmosphere papers in JGR Green issues alternate to those containing upper-atmosphere papers will be continued through 1982. From preliminary indications the experiment seems to be working, but a full year of data, including a renewal cycle, is needed to assess the success of the experiment. Final decision will be made prior to the 1983 dues notices.

  3. Spring 1991 Meeting outstanding papers

    Science.gov (United States)

    The Atmospheric Sciences Committee has presented Kaye Brubaker and Jichun Shi with Outstanding Student Paper awards for presentations given at the AGU 1991 Spring Meeting, held in Baltimore May 28-31.Brubaker's paper, “Precipitation Recycling Estimated from Atmospheric Data,” presented quantitative estimates of the contribution of locallyevaporated moisture to precipitation over several large continental regions. Recycled precipitation is defined as water that evaporates from the land surface of a specified region and falls again as precipitation within the region. Brubaker applied a control volume analysis based on a model proposed by Budyko.

  4. Proceedings of the KNS spring meeting

    International Nuclear Information System (INIS)

    2004-01-01

    This proceedings contains articles of 2004 spring meeting of the Korean Nuclear Society. It was held on May 27-28, 2004 in Gyeongju, Korea. This proceedings is comprised of 10 sessions. The main subject titles of session are as follows: reactor physics and nuclear reactor design, thermodynamics and fluid flow, reactor operation and control, reactor safety, reactor fuels and nuclear materials, fuel cycle and waste management, radiation protection, nuclear fusion and laser technology, fuel cycle and waste management, nuclear fuel and nuclear materials, radiation protection, radiation application, life time management and decontamination, nuclear structure, nuclear beam application and nuclear fusion, nuclear policy. (Yi, J. H.)

  5. Proceedings of the KNS spring meeting

    International Nuclear Information System (INIS)

    2003-01-01

    This proceedings contains articles of 2003 spring meeting of the Korean Nuclear Society. It was held on May 29-30, 2003 in Gyeongju, Korea. This proceedings is comprised of 12 sessions. The main subject titles of session are as follows: reactor physics and nuclear reactor design, reactor operation and control, thermodynamics and fluid flow, reactor safety, reactor fuels and nuclear materials, fuel cycle and waste management, radiation protection, nuclear fusion and laser technology, fuel cycle and waste management, nuclear fuel and nuclear materials, radiation protection, radiation application, life time management and decontamination, nuclear structure, nuclear physics and nuclear fusion, nuclear policy. (Yi, J. H.)

  6. Proceedings of the Korean Society Nuclear Medicine Spring Meeting 2002

    International Nuclear Information System (INIS)

    2002-01-01

    This proceedings contains articles of 2002 Spring meeting of the Korean Society Nuclear Medicine. It was held on May 17, 2002 in Suwon, Korea. This proceedings is comprised of 3 sessions. The subject titles of session are as follows: Gynecological and Colorectal cancer, Lung cancer and Lymphoma, and general nuclear medicine. (Yi, J. H.)

  7. Proceedings of the joint Nordic spring meeting '92

    International Nuclear Information System (INIS)

    Lindgaard, P.-A.

    1992-05-01

    Proceedings in the form of extended abstracts of the Joint Nordic Spring Meeting '92 including the 3rd Nordic Conference on Surface Science, the 6th Nordic Symposium on Computer Simulation, and 3rd Nordic Symposium on Superconductivity. In addition there are contributions from workshops on the Physics of Small Cluster, on Soft Condensed Matter Physics and from an Electronic Properties Workshop. The proceedings constrain over 300 contributions on the mentioned subjects. Further, there are several contributions on general solid state subjects, magnetism, semiconductors etc. (au) (4 tabs., 187 ills., 931 refs.)

  8. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Document Server

    D. Acosta

    Run coordination and DPG The activities of the DPGs in the last six months have included the completion of publications (and many internal notes) on the data collected during CRAFT08 exercise, continuation of these studies with CRAFT09 data, and finally the first workflows and prompt feedback on 2009 LHC beam data. The level of readiness of the DPG prompt feedback groups is quite high, as first results from the early November “beam splash” data were shown to CMS within 24 hours of the first LHC beam. Moreover, results from the first collisions at 900 GeV were presented publicly three days afterward on November 26th. The CRAFT09 cosmic data taking period provided an opportunity to commission the calibration and alignment workflows on large data samples using the same software release series intended for the first LHC data, and to demonstrate routine operation of alignment and calibration workflows under production conditions. Significantly, the "prompt calibration loop" wa...

  9. Proceedings of the Korean Society for Nondestructive Testing Spring Meeting 2001

    International Nuclear Information System (INIS)

    2001-05-01

    This proceedings contains articles of the Korean Society for Nondestructive Testing Spring Meeting, 2001. It was held on May. 11-12, 2001 in Seoul, Korea and subject of the Korean Society for Nondestructive Testing Spring Meeting 2001. This proceedings is comprised of 5 sessions.

  10. Proceedings of the Korean Society for Nondestructive Testing Spring Meeting 1993

    International Nuclear Information System (INIS)

    1993-05-01

    This proceedings contains articles of the Korean Society for Nondestructive Testing Spring Meeting, 1993. It was held on May. 24, 1993 in Seoul, Korea and subject of the Korean Society for Nondestructive Testing Spring Meeting 1993. There are main session and technical session.

  11. Proceedings of the Korean Society for Nondestructive Testing Spring Meeting 1992

    International Nuclear Information System (INIS)

    1992-05-01

    This proceedings contains articles of the Korean Society for Nondestructive Testing Spring Meeting, 1992. It was held on May. 20, 1992 in Seoul, Korea and subject of the Korean Society for Nondestructive Testing Spring Meeting 1992. There are main session and technical session.

  12. Proceedings of the Conference and Symposium Korean Association for Radiation Protection Spring Meeting 2017

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-04-15

    This proceedings contains articles of the Korean Association for Radiation Protection Spring Meeting, 2017. It was held on 13 April 2017 Gunsan Saemangeum Covention Center in Gunsan, Korea and subject of the Korean Association for Radiation Protection Spring Meeting 2017. This proceedings is comprised of 5 ssessions. The main topic titles of session are as follows: Radiation protection, Biotechnology of radiation, Radiation measurement and prevention, Radiation epidemiography.

  13. Proceedings of the Conference and Symposium Korean Association for Radiation Protection Spring Meeting 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-04-15

    This proceedings contains articles of the Korean Association for Radiation Protection Spring Meeting, 2013. It was held on Apr.24-26, 2013 Hotel Hyundai Mokpo in Mokpo, Korea and subject of the Korean Association for Radiation Protection Spring Meeting 2013. This proceedings is comprised of 6 sessions. The main topic titles of session are as follows: Medical treatment and Biology 1, Measurement and Analysis 1, Radiation protection1, Medical treatment and Biology 2, Measurement and Analysis 2, Radiation protection 2.

  14. Proceedings of the Conference and Symposium Korean Association for Radiation Protection Spring Meeting 2017

    International Nuclear Information System (INIS)

    2017-04-01

    This proceedings contains articles of the Korean Association for Radiation Protection Spring Meeting, 2017. It was held on 13 April 2017 Gunsan Saemangeum Covention Center in Gunsan, Korea and subject of the Korean Association for Radiation Protection Spring Meeting 2017. This proceedings is comprised of 5 ssessions. The main topic titles of session are as follows: Radiation protection, Biotechnology of radiation, Radiation measurement and prevention, Radiation epidemiography.

  15. Proceedings of the Conference and Symposium Korean Association for Radiation Protection Spring Meeting 2016

    International Nuclear Information System (INIS)

    2016-04-01

    This proceedings contains articles of the Korean Association for Radiation Protection Spring Meeting, 2016. It was held on Apr. 6-8, 2016 Daemyung Resort in Byeonsan, Korea and subject of the Korean Association for Radiation Protection Spring Meeting 2016. This proceedings is comprised of 4 sessions. The main topic titles of session are as follows: Radiation protection, Biotechnology of radiation, Radiation Measurement, Radiation environment and prevention

  16. DGMK spring meeting of Fachbereich Aufsuchung und Gewinnung

    International Nuclear Information System (INIS)

    2002-01-01

    The report of the meeting contains 42 articles on the subjects DGMK project ''tight gas reservoirs'', geophysics, petroleum geology, drilling technique, petroleum and natural gas transport technique and underground storage of natural gas. (UKE) [de

  17. Proceedings of the Conference and Symposium Korean Association for Radiation Protection Spring Meeting 2014

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-04-15

    This proceedings contains articles of the Korean Association for Radiation Protection Spring Meeting, 2014. It was held on Apr.23-25, 2014 Grand Hotel in Busan, Korea and subject of the Korean Association for Radiation Protection Spring Meeting 2014. This proceedings is comprised of 8 sessions. The main topic titles of session are as follows: Medical treatment and Biology 1, Measurement and Analysis 1, Measurement and Analysis 2, Radiation protection 1, Radiation protection 2, Medical treatment and Biology 2, Measurement and Analysis 3, Radiation protection 3.

  18. DPG-plus syndrome: new report of a rare entity.

    Science.gov (United States)

    Azurara, Laura; Marçal, Mónica; Vieira, Filipa; Tuna, Madalena Lopo

    2015-11-12

    Pituitary gland duplication is a particularly rare finding. Different theories have been proposed to explain its pathogenesis, however, this phenomenon is not yet totally understood. Recently, duplication of the pituitary gland (DPG)-plus syndrome has been described, associating DPG with other blastogenic defects. We present the clinical and imaging findings of a newborn girl with DPG, associated with multiple other midline anomalies, including a nasopharyngeal teratoma, palate cleft deformity, bifid nasal bridge, tongue and uvula, hypoplasia of the basis pontis and corpus callosum, duplication of the basilar artery and hypothalamic hamartoma. We describe our patient's multidisciplinary team approach and emphasise the importance of reporting upcoming cases, in order to give more insight into the understanding of this complex entity. 2015 BMJ Publishing Group Ltd.

  19. Spring Meeting of the German Physical Society : Arbeitskreis FestkÖrperphysik

    CERN Document Server

    the German Physical Society : Arbeitskreis FestkÖrperphysik

    1998-01-01

    This volume contains the invited papers of the Spring meeting of the Arbeitskreis Festkörperphysik of the Deutsche Physikalische Gesellschaft, which has been held in Münster in 1997. The meeting has been attended by roughly 4000 participants from all areas of solid state physics. This book covers the current status of the fileds and shows the excitement which has been felt by the speakers when presenting their results.

  20. In celebration of the 60th anniversary proceedings of the KSME 2005 spring annual meeting

    International Nuclear Information System (INIS)

    2005-01-01

    This proceedings contains articles of 2005 spring annual meeting of the Korean Society of Mechanical Engineers. It was held on May 25-27, 2005 in Busan, Korea. This proceedings are comprised of 21 sessions. The main subject titles of session are as follows: nondestructive evaluation, fatigue evaluation, computation mechanics, CAE design, vibration, instrumentation, fabrication, optimum design, heat exchanger, fluid mechanics, nano fluid, plasma, heat transfer analysis, energy (Yi, J. H.)

  1. Spring meeting of the scientific associations for atomic physics, high speed physics, mass spectrometry, molecular physics, plasma physics

    International Nuclear Information System (INIS)

    1996-01-01

    The volume contains the abstracts of the contributions to the Spring Meeting in Rostock with aspects of atomic physics, molecular physics, high speed physics, plasma physics and mass spectrometry. (MM)

  2. 13th New Mexico Analysis Seminar & Western Spring Sectional Meeting of the AMS

    CERN Document Server

    Marcantognini, Stefania; Stokolos, Alexander; Urbina, Wilfredo; Harmonic analysis, partial differential equations, complex analysis, Banach spaces, and operator theory : celebrating Cora Sadosky's life

    2016-01-01

    Covering a range of subjects from operator theory and classical harmonic analysis to Banach space theory, this book contains survey and expository articles by leading experts in their corresponding fields, and features fully-refereed, high-quality papers exploring new results and trends in spectral theory, mathematical physics, geometric function theory, and partial differential equations. Graduate students and researchers in analysis will find inspiration in the articles collected in this volume, which emphasize the remarkable connections between harmonic analysis and operator theory. Another shared research interest of the contributors of this volume lies in the area of applied harmonic analysis, where a new notion called chromatic derivatives has recently been introduced in communication engineering. The material for this volume is based on the 13th New Mexico Analysis Seminar held at the University of New Mexico, April 3-4, 2014 and on several special sections of the Western Spring Sectional Meeting at th...

  3. The restoration in vivo of 2,3-diphosphoglycerate (2,3-DPG) in stored red cells, after transfusion. The levels of red cells 2,3-DPG.

    Science.gov (United States)

    Stan, Ana; Zsigmond, Eva

    2009-01-01

    Since the main reason for transfusing preserved red cells is to increase the oxygen carrying capacity of the recipient, the circulating preserved red cells should have at the time of transfusion normal oxygen uptake and normal oxyhemoglobin dissociation characteristics. We evaluated the effectiveness of transfused red cells, through periodical determination of erythrocyte components, during 72 hours after transfusions of large quantities (3,000 mL) of blood. Three patients with massive hemorrhages, two after amputation and one after nephrectomy were given each 3,000 mL preserved blood (in ACD, 10 days, at 4 degrees C). Red cell 2,3-DPG and serum inorganic phosphorus were determined prior to transfusion and after, periodically, for three days. Red cell 2,3-DPG was determined by Krimsky's method and inorganic phosphorus by Kuttner and Lichtenstein's method. The in vivo restoration of 2,3-DPG--of transfused red cells is shown as a percentage of recipient's final 2,3-DPG level, and was calculated in each of the three patients. The level of erythrocyte 2,3-DPG was greater than 60% of the final level within 24 hours, after the end of transfusion. The in vivo rates of restoration of 2,3-DPG in transfused red cells for periods of 0-6, 6-24, 24-48 and 48-72 hours are 0.251, 0.238, 0.133, 0.120 mM/L cells/hour. The therapeutic significance of the increased oxygen affinity of stored blood becomes very important in clinical conditions, when large volumes of red cells are urgently needed. After massive transfusions, the restoration of 2,3-DPG in red cells produces a decrease of serum inorganic phosphorus through its consumption. The stored blood with low values of erythrocyte 2,3-DPG can be used without hesitation when correcting a chronic anemia for instance, but in acute situation, when the organism needs restoration of the oxygen releasing capacity within minutes, the resynthesis is obviously insufficient. In such situations, fresh blood or blood with a near normal 2,3-DPG

  4. 2,3-DPG-Hb complex: a hypothesis for an asymmetric binding.

    Science.gov (United States)

    Pomponi, M; Bertonati, C; Fuglei, E; Wiig, O; Derocher, A E

    2000-05-15

    This study was undertaken to test the symmetry of 2,3-diphosphoglycerate (2,3-DPG) binding site in hemoglobin (Hb). From Arnone's study [A. Arnone, Nature (London) 237 (1972) 146] the 2,3-DPG binding site is located at the top of the cavity, that runs through the center of the deoxy-Hb molecule. However, it is possible that this symmetry reported by Arnone, for crystals of 2,3-DPG-Hb complex, might not be conserved in solution. In this paper, we report the 31P nuclear magnetic resonances of the 2,3-DPG interaction with Hb. The 2,3-DPG chemical shifts of the P2 and P3 resonance are both pH- and hemoglobin-dependent [protein from man, polar bear (Ursus maritimus), Arctic fox (Alopex lagopus) and bovine]. 2,3-DPG binds tightly to deoxyhemoglobin and weakly, nevertheless significantly, to oxyhemoglobin. In particular, our results suggest similar spatial position of the binding site of 2,3-DPG in both forms of Hb in solutions. However, the most unexpected result was the apparent loss of symmetry in the binding site, which might correlate with the ability of the hemoglobin to modulate its functional behavior. The different interactions of the phosphate groups indicate small differences in the quaternary structure of the different deoxy forms of hemoglobin. Given the above structural perturbation an asymmetric binding in the complex could justify, at least in part, different physiological properties of Hb. Regardless, functionally relevant effects of 2,3-DPG seem to be measured and best elucidated through solution studies.

  5. Isotope effects in the non enzymic glycation of hemoglobin catalyzed by DPG

    International Nuclear Information System (INIS)

    Gil, Herminia; Uzcategui, Jorge

    1993-01-01

    The paradigmatic reaction of glucose with hemoglobin (Hb A o ) has been studied and is known to occur most rapidly at the N-terminal valine of the β-subunit. An initial, rapid imine formation is succeeded by slower Amadori rearrangement. Non enzymic glycation of Hb A o was studied in vitro in buffer Tris 10 mM in H 2 O and D 2 O, pH 7.3, pD 7.8 at 37 deg C at a fixed concentration of 2,3 diphosphoglycerate (DPG). The reaction exhibits identical rates in protium and deuterium oxides. When D-glucose-2-h is compared with D-glucose-2-d, the kinetic isotope effect for the DPG-dependent rate is 2.1 ± 0.3, while the DPG-independent rate constant shows no isotope effect (1.1 ± 0.1). The absence of a rate in isotopic water solvents shows that proton donation for solvent, lyons or DPG does not limit the rate. The substrate isotope effect of around 2 for the DPG kinetic term indicates that the proton abstraction step of the Amadori rearrangement by DPG is wholly or partially rate-limiting for this reaction. (author)

  6. Isotope effects in the non enzymic glycation of hemoglobin catalyzed by DPG

    Energy Technology Data Exchange (ETDEWEB)

    Gil, Herminia; Uzcategui, Jorge [Universidad de Los Andes, Merida (Venezuela). Dept. de Quimica

    1993-12-31

    The paradigmatic reaction of glucose with hemoglobin (Hb A{sub o}) has been studied and is known to occur most rapidly at the N-terminal valine of the {beta}-subunit. An initial, rapid imine formation is succeeded by slower Amadori rearrangement. Non enzymic glycation of Hb A{sub o} was studied in vitro in buffer Tris 10 mM in H{sub 2} O and D{sub 2} O, pH 7.3, pD 7.8 at 37 deg C at a fixed concentration of 2,3 diphosphoglycerate (DPG). The reaction exhibits identical rates in protium and deuterium oxides. When D-glucose-2-h is compared with D-glucose-2-d, the kinetic isotope effect for the DPG-dependent rate is 2.1 {+-} 0.3, while the DPG-independent rate constant shows no isotope effect (1.1 {+-} 0.1). The absence of a rate in isotopic water solvents shows that proton donation for solvent, lyons or DPG does not limit the rate. The substrate isotope effect of around 2 for the DPG kinetic term indicates that the proton abstraction step of the Amadori rearrangement by DPG is wholly or partially rate-limiting for this reaction. (author) 23 refs., 4 figs.

  7. Proceedings of 2nd Korea-China Congress of Nuclear Medicine and the Korean Society Nuclear Medicine Spring Meeting 2000

    International Nuclear Information System (INIS)

    2000-01-01

    This proceedings contains articles of 2nd Korea-China Congress of Nuclear Medicine and 2000 spring meeting of the Korean Society Nuclear Medicine. It was held on May 17-19, 2000 in Seoul, Korean. This proceedings is comprised of 6 sessions. The subject titles of session are as follows: general nuclear medicine, neurology, oncology, radiopharmacy and biology, nuclear cardiology, nuclear cardiology: physics and instrumentation and so on. (Yi, J. H.)

  8. EMRS Spring Meeting 2014 Symposium D: Phonons and fluctuations in low dimensional structures

    International Nuclear Information System (INIS)

    2014-01-01

    The E-MRS 2014 Spring meeting, held from 26-30th May 2014 in Lille included the Symposium D entitled ''Phonons and Fluctuations in Low Dimensional Structures'', the first edition of its kind. The symposium was organised in response to the increasing interest in the study of phonons in the context of advances in condensed matter physics, electronics, experimental methods and theory and, in particular, the transfer of energy across atomic interfaces and the propagation of energy in the nm-scale. Steering heat by light or vice versa and examining nano-scale energy conversion (as in thermoelectricity and harvesting e.g. in biological systems) are two aspects that share the underlying science of energy processes across atomic interfaces and energy propagation in the nanoscale and or in confined systems. The nanometer scale defies several of the bulk relationships as confinement of electrons and phonons, locality and non-equilibrium become increasingly important. The propagation of phonons as energy carriers impacts not only heat transfer, but also the very concept and handling of temperature in non-equilibrium and highly localised conditions. Much of the needed progress depends on the materials studied and this symposium targeted the interface material aspects as well as the emerging concepts to advance in this field. The symposium had its origins in a series of meetings and seminars including: (1) the first Phonon Engineering Workshop, funded by Catalan Institute for Research and Advanced Studies (ICREA), the then MICINN, the CNRS, VTT, and several EU projects, held in Saint Feliu de Guixols (Girona, Spain) from 24th to 27th of May 2010 with 65 participants from Europe, the USA and Japan; (2) the first Phonons and Fluctuations workshop, held in Paris on 8th and 9th November 2010, supported by French, Spanish and Finnish national projects and EU projects, attended by about 50 researchers; (3) the second Phonon and Fluctuations workshop, held in Paris

  9. EMRS Spring Meeting 2014 Symposium D: Phonons and fluctuations in low dimensional structures

    Science.gov (United States)

    2014-11-01

    The E-MRS 2014 Spring meeting, held from 26-30th May 2014 in Lille included the Symposium D entitled ''Phonons and Fluctuations in Low Dimensional Structures'', the first edition of its kind. The symposium was organised in response to the increasing interest in the study of phonons in the context of advances in condensed matter physics, electronics, experimental methods and theory and, in particular, the transfer of energy across atomic interfaces and the propagation of energy in the nm-scale. Steering heat by light or vice versa and examining nano-scale energy conversion (as in thermoelectricity and harvesting e.g. in biological systems) are two aspects that share the underlying science of energy processes across atomic interfaces and energy propagation in the nanoscale and or in confined systems. The nanometer scale defies several of the bulk relationships as confinement of electrons and phonons, locality and non-equilibrium become increasingly important. The propagation of phonons as energy carriers impacts not only heat transfer, but also the very concept and handling of temperature in non-equilibrium and highly localised conditions. Much of the needed progress depends on the materials studied and this symposium targeted the interface material aspects as well as the emerging concepts to advance in this field. The symposium had its origins in a series of meetings and seminars including: (1) the first Phonon Engineering Workshop, funded by Catalan Institute for Research and Advanced Studies (ICREA), the then MICINN, the CNRS, VTT, and several EU projects, held in Saint Feliu de Guixols (Girona, Spain) from 24th to 27th of May 2010 with 65 participants from Europe, the USA and Japan; (2) the first Phonons and Fluctuations workshop, held in Paris on 8th and 9th November 2010, supported by French, Spanish and Finnish national projects and EU projects, attended by about 50 researchers; (3) the second Phonon and Fluctuations workshop, held in Paris on 8th and 9th

  10. DGMK spring meeting of the 'Exploration and Production' department. Authors' manuscripts; DGMK-Fruehjahrstagung des Fachbereichs 'Aufsuchung und Gewinnung'. Autorenmanuskripte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The spring meeting of the Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle e.V. focused on exploration and production. Papers were presented on exploration and production in general, geology, deposit development, extraction of petroleum/natural gas, drilling, underground storage, geophysics and geochemistry. [German] Die Fruehjahrstagung der Deutschen Wissenschaftlichen Gesellschaft fuer Erdoel, Erdgas und Kohle e.V. wurde vom Fachbereich ''Aufsuchung und Gewinnung'' bestimmt. Die Vortraege beschaeftigten sich mit den Gebieten Exploration and Production allgemein, Geologie, Lagerstaettentechnik, Foerdertechnik fuer Erdoel/Erdgas, Bohrtechnik, Untertagesspeichertechnik, Geophysik und Geochemie.

  11. High-order polygonal discontinuous Petrov-Galerkin (PolyDPG) methods using ultraweak formulations

    Science.gov (United States)

    Vaziri Astaneh, Ali; Fuentes, Federico; Mora, Jaime; Demkowicz, Leszek

    2018-04-01

    This work represents the first endeavor in using ultraweak formulations to implement high-order polygonal finite element methods via the discontinuous Petrov-Galerkin (DPG) methodology. Ultraweak variational formulations are nonstandard in that all the weight of the derivatives lies in the test space, while most of the trial space can be chosen as copies of $L^2$-discretizations that have no need to be continuous across adjacent elements. Additionally, the test spaces are broken along the mesh interfaces. This allows one to construct conforming polygonal finite element methods, termed here as PolyDPG methods, by defining most spaces by restriction of a bounding triangle or box to the polygonal element. The only variables that require nontrivial compatibility across elements are the so-called interface or skeleton variables, which can be defined directly on the element boundaries. Unlike other high-order polygonal methods, PolyDPG methods do not require ad hoc stabilization terms thanks to the crafted stability of the DPG methodology. A proof of convergence of the form $h^p$ is provided and corroborated through several illustrative numerical examples. These include polygonal meshes with $n$-sided convex elements and with highly distorted concave elements, as well as the modeling of discontinuous material properties along an arbitrary interface that cuts a uniform grid. Since PolyDPG methods have a natural a posteriori error estimator a polygonal adaptive strategy is developed and compared to standard adaptivity schemes based on constrained hanging nodes. This work is also accompanied by an open-source $\\texttt{PolyDPG}$ software supporting polygonal and conventional elements.

  12. Research in rock deformation: Report of the Second Rock Deformation Colloquium, 1989 AGU Spring Meeting

    Science.gov (United States)

    Green, Harry

    In response to the considerable interest expressed at the first Rock Deformation Colloquium held at the Fall 1988 AGU meeting in San Francisco, a second dinner meeting was held on Monday evening, May 8, 1989, at the Omni Hotel in Baltimore. The principal business items were a report by Steve Kirby (U.S. Geological Survey, Menlo Park, Calif.) concerning the meeting the previous day of the rock deformation steering committee and an after dinner presentation by Steve Freiman of the National Institute of Standards and Technology in Gaithersburg, Md., entitled “The Environmental Effects on Subcritical Crack Growth.” Kirby reported that a technical committee for rock deformation has been established within the Tectonophysics Section of AGU; the steering committee will attempt to establish constructive working relations with allied societies and disciplines, such as ceramics, metallurgy, materials science, structural geology, and surface science. Brian Evans of the Massachusetts Institute of Technology in Cambridge, Terry Tullis of Brown University in Providence, R.I., and Harry Green of the University of California at Davis agreed to be a subcommittee to propose a name for the technical committee, for discussion at the next steering committee meeting to be held before the 1989 Fall AGU meeting. Green also agreed to investigate the possibility of convening a special session at the Fall Meeting on the nature and mechanism of deep-focus earthquakes. (The session is Deep Slab Deformation and Faulting, T21B and T22A, organized by Harry and Ken Creager of the University of Washington, Seattle; it will be all day on Tuesday, December 5.)

  13. 78 FR 66354 - Warm Springs Irrigation District; Notice of Technical Meeting

    Science.gov (United States)

    2013-11-05

    ... Stanleya confertiflora requested by the U.S. Bureau of Land Management on June 7, 2013; the coordination of... project. f. Proposed Agenda: 1. Introduction 2. Meeting objectives 3. Plant survey discussion 4. NEPA... business Thursday, November 7, 2013, to RSVP to receive specific instructions on how to participate. Dated...

  14. 78 FR 58534 - Warm Springs Irrigation District; Notice of Technical Meeting

    Science.gov (United States)

    2013-09-24

    ... confertiflora requested by the U.S. Bureau of Land Management on June 7, 2013; the coordination of the National... Agenda: 1. Introduction. 2. Meeting objectives. 3. Plant survey discussion. 4. NEPA coordination. 5... phone. Please contact Kelly Wolcott at [email protected] or (202) 502-6480 by close of business...

  15. DGMK spring meeting of Fachbereich Aufsuchung und Gewinnung; DGMK-Fruehjahrstagung des Fachbereichs Aufsuchung und Gewinnung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The report of the meeting contains 42 articles on the subjects DGMK project ''tight gas reservoirs'', geophysics, petroleum geology, drilling technique, petroleum and natural gas transport technique and underground storage of natural gas. (UKE) [German] Der Tagungsband enthaelt 42 Vortraege zu den Themengebieten DGMK-Projekt ''Tight-Gas Reservoirs'', Geophysik, Erdoeelgeology, Bohrtechnik, Lagerstaettentechnik, Erdoel- und Erdgas- Foerdertechnik und Untertagesspeichertechnik. (UKE)

  16. [The role of 2,3-DPG in nerve conduction of children with type 1 diabetes].

    Science.gov (United States)

    Pańkowska, Ewa; Szypowska, Agnieszka; Wysocka, Marta; Lipka, Maria

    2005-01-01

    Neuropathy is one of the chronic complications of diabetes, and it is uncommon in children and adolescents. It can be recognized in a short period after the onset of diabetes and not always is connected with poor metabolic control. Hypoxia is considered as one from greatest factors diabetic neuropathy and oxygen transport to tissue partially depends on the diphosphoglycerate (2,3 DPG) concentration. As showed recent clinical studies, its concentration in children with diabetes can be abnormal. To assess the role of 2,3 DPG in nerve conduction velocity, as well as qualification of risk factors. To study were included randomly selected 37 patients with diabetes type 1, average age 15.5+/-2.25 years, with a duration of diabetes of more than 5 years (av 9.64+/-1.95 years), treated with intensive insulin therapy (MDI and CSII), without metabolic acidosis pH - 7.35. The nerve conduction velocity was measured in the sensor and motor nerves. HbA1c and 2,3 DPG were assessed additionally. Changes in motor nerve conduction velocity were observed at 22 patients. Average value of HbA1c in the studied group was 8.22+/-1.2%, Average concentration of 2,3 DPG was 6.15+/-1.67 mmol/l (3.84-11 mmol/l), in group with nerve dysfunction was lower - 5.86+/-1.69 mmol/l vs. 6.38+/-1.67, but this difference was not statistically significant. The lower value of 2,3 DPG significantly correlated with abnormal results of electroneurography test, especially with motor and sensor nerve latency (r=-0.34, p=0.038; r=-0.4, p=0.013) but not correlated with HbA1c (r= -0,19;p= 0,25), age of patients (r=0.008; p=0.96) and diabetes duration (r=-0.16; p=0.31). Nerve dysfunction is common in children with type 1 diabetes despite metabolic control and duration of diabetes. 2,3 DPG can be an independent factor of diabetes neuropathy correlated with abnormal value of the nerve conduction test.

  17. Academic Libraries: Reaching Up and Stretching Out. Proceedings of the Spring Meeting of the Nebraska Library Association, College and University Section (Crete, Nebraska, May 25, 1990).

    Science.gov (United States)

    Giesecke, Joan, Ed.

    This proceedings report provides the papers presented at the 1990 spring meeting. Titles and authors of the seven papers are as follows: (1) "Marketing without a Plan: Seizing Outreach Opportunities as They Occur" (Joan Giesecke, Gail Egbers, Kay Logan-Peters, and Debra Pearson); (2) "Historians and the Academic Library: Traditional…

  18. Chain elongation and cyclization in type III PKS DpgA.

    Science.gov (United States)

    Wu, Hai-Chen; Li, Yi-San; Liu, Yu-Chen; Lyu, Syue-Yi; Wu, Chang-Jer; Li, Tsung-Lin

    2012-04-16

    Chain elongation and cyclization of precursors of dihydroxyphenylacetyl-CoA (DPA-CoA) catalyzed by the bacterial type III polyketide synthase DpgA were studied. Two labile intermediates, di- and tri-ketidyl-CoA (DK- and TK-CoA), were proposed and chemically synthesized. In the presence of DpgABD, each of these with [(13)C(3)]malonyl-CoA (MA-CoA) was able to form partially (13)C-enriched DPA-CoA. By NMR and MS analysis, the distribution of (13)C atoms in the partially (13)C-enriched DPA-CoA shed light on how the polyketide chain elongates and cyclizes in the DpgA-catalyzed reaction. Polyketone intermediates elongate in a manner different from that which had been believed: two molecules of DK-CoA, or one DK-CoA plus one acetoacetyl-CoA (AA-CoA), but not two molecules of AA-CoA can form one molecule of DPA-CoA. As a result, polyketidyl-CoA serves as both the starter and extender, whereas polyketone-CoA without the terminal carboxyl group can only act as an extender. The terminal carboxyl group is crucial for the cyclization that likely takes place on CoA. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. PREFACE: E-MRS 2012 Spring Meeting, Symposium M: More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics

    Science.gov (United States)

    Wenger, Christian; Fompeyrine, Jean; Vallée, Christophe; Locquet, Jean-Pierre

    2012-12-01

    More than Moore explores a new area of Silicon based microelectronics, which reaches beyond the boundaries of conventional semiconductor applications. Creating new functionality to semiconductor circuits, More than Moore focuses on motivating new technological possibilities. In the past decades, the main stream of microelectronics progresses was mainly powered by Moore's law, with two focused development arenas, namely, IC miniaturization down to nano scale, and SoC based system integration. While the microelectronics community continues to invent new solutions around the world to keep Moore's law alive, there is increasing momentum for the development of 'More than Moore' technologies which are based on silicon technologies but do not simply scale with Moore's law. Typical examples are RF, Power/HV, Passives, Sensor/Actuator/MEMS or Bio-chips. The More than Moore strategy is driven by the increasing social needs for high level heterogeneous system integration including non-digital functions, the necessity to speed up innovative product creation and to broaden the product portfolio of wafer fabs, and the limiting cost and time factors of advanced SoC development. It is believed that More than Moore will add value to society on top of and beyond advanced CMOS with fast increasing marketing potentials. Important key challenges for the realization of the 'More than Moore' strategy are: perspective materials for future THz devices materials systems for embedded sensors and actuators perspective materials for epitaxial approaches material systems for embedded innovative memory technologies development of new materials with customized characteristics The Hot topics covered by the symposium M (More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics) at E-MRS 2012 Spring Meeting, 14-18 May 2012 have been: development of functional ceramics thin films New dielectric materials for advanced microelectronics bio- and CMOS compatible

  20. PREFACE Surface Modifications of Diamond and Related Materials (Session D, E-MRS Spring Meeting)

    Science.gov (United States)

    Nebel, Christoph E.

    2010-11-01

    This special issue contains selected papers which were presented at the E-MRS Symposium BIOMATERIALS, SENSORS & SURFACES, D: 'Surface modifications of diamond and related materials' which was held on 7-9 June 2010 in Strasbourg (France). With about 54 oral and poster presentations given from teams all over the world it was a very interesting, dense and lively meeting. The symposium focused on chemical modifications applied to graft surfaces of diamond, nano-diamond particles, diamond-like carbon, graphene, graphite and carbon nano-tubes with linker molecular layers for realization of bio-sensors, bio-markers, separation techniques, and switchable chemical links. Presented techniques span spontaneous bonding to photo-chemical attachment, electrochemical modifications, to Suzuki-coupling of aryl molecules. Special attention was drawn to mechanisms driving bonding kinetics such as electron transfer reactions, hydrogen cleavage reactions by nucleophilic molecules and growths schemas which vary from correlated two-dimensional chain reactions to three-dimensional cross polymerization. Hydrogen terminations, surface defects, surface roughness and atomic arrangements of surface carbon atoms were of interest to elucidate bonding mechanisms. In addition, bonding stability, either of linker molecules or of complex functionalized surfaces with DNA, proteins and enzymes was discussed by several speakers as well as details of the electronic interfaces between solid transducers and bio-layers. Here the characterization of surface and interface defect densities, of Fermi level pinning and of electron transfer rates was a major topic. Miniaturization of sensor area and application of new detection schemas was discussed. Diamond nano-particles which are increasingly used as biomarkers in drug delivery experiments also attracted attention. The organizers express our gratitude to the international members of the scientific committee who actively contributed to ensure an attractive

  1. Upgrading a Social Media Strategy to Increase Twitter Engagement During the Spring Annual Meeting of the American Society of Regional Anesthesia and Pain Medicine.

    Science.gov (United States)

    Schwenk, Eric S; Jaremko, Kellie M; Gupta, Rajnish K; Udani, Ankeet D; McCartney, Colin J L; Snively, Anne; Mariano, Edward R

    Microblogs known as "tweets" are a rapid, effective method of information dissemination in health care. Although several medical specialties have described their Twitter conference experiences, Twitter-related data in the fields of anesthesiology and pain medicine are sparse. We therefore analyzed the Twitter content of 2 consecutive spring meetings of the American Society of Regional Anesthesia and Pain Medicine using publicly available online transcripts. We also examined the potential contribution of a targeted social media campaign on Twitter engagement during the conferences. The original Twitter meeting content was largely scientific in nature and created by meeting attendees, the majority of whom were nontrainee physicians. Physician trainees, however, represent an important and increasing minority of Twitter contributors. Physicians not in attendance predominantly contributed via retweeting original content, particularly picture-containing tweets, and thus increased reach to nonattendees. A social media campaign prior to meetings may help increase the reach of conference-related Twitter discussion.

  2. DGMK/OeGEW Spring meeting of the exploration and production department. Proceedings; DGMK/OeGEW-Fruehjahrstagung des Fachbereiches Aufsuchung und Gewinnung. Tagungsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-01

    Within the spring meeting 2013 of the exploration and production department of the German Society and Coal Science and Technology (DGMK, Hamburg, Federal Republic of Germany) and the Austrian Society of Petroleum Sciences (OeGEW, Vienna, Austria) at 18th and 19th April, 2013, in Celle (Federal Republic of Germany), lectures on the following themes were held: (1) Petroleum geology; (2) Environmental protection and occupational safety; (3) Drilling technology; (4) Petroleum and natural gas conveying technology; (5) Geophysics; (6) Underground storage technology; (7) Reservoir engineering. Additionally, posters were presented according to these themes.

  3. Duplication of the pituitary gland associated with multiple blastogenesis defects: Duplication of the pituitary gland (DPG)-plus syndrome. Case report and review of literature.

    Science.gov (United States)

    Manjila, Sunil; Miller, Erin A; Vadera, Sumeet; Goel, Rishi K; Khan, Fahd R; Crowe, Carol; Geertman, Robert T

    2012-01-01

    Duplication of the pituitary gland (DPG) is a rare craniofacial developmental anomaly occurring during blastogenesis with postulated etiology such as incomplete twinning, teratogens, median cleft face syndrome or splitting of the notochord. The complex craniocaudal spectrum of blastogenesis defects associated with DPG is examined with an illustrative case. We report for the first time in the medical literature some unique associations with DPG, such as a clival encephalocele, third cerebral peduncle, duplicate odontoid process and a double tongue with independent volitional control. This patient also has the previously reported common associations such as duplicated sella, cleft palate, hypertelorism, callosal agenesis, hypothalamic enlargement, nasopharyngeal teratoma, fenestrated basilar artery and supernumerary teeth. This study also reviews 37 cases of DPG identified through MEDLINE literature search from 1880 to 2011. It provides a detailed analysis of the current case through physical examination and imaging. The authors propose that the developmental deformities associated with duplication of pituitary gland (DPG) occur as part of a developmental continuum, not as chance associations. Considering the fact that DPG is uniquely and certainly present throughout the spectrum of these blastogenesis defects, we suggest the term DPG-plus syndrome.

  4. Erythrocyte 2,3-DPG, PO2 50% and available O2 during the early post-natal fall in hemoglobin in rabbits.

    Science.gov (United States)

    Holter, P H; Halvorsen, S; Refsum, H E

    1982-09-01

    Erythrocyte 2,3-DPG, PO2 50%, whole blood hemoglobin and available O2, and fixed acid Bohr effect were studied during the first 10 days after birth in rapidly growing suckling rabbits. The post-natal fall in hemoglobin concentration was accompanied by a marked rise in erythrocyte 2,3-DPG and a gradual increase in PO2 50%. The rise in PO2 50% was sufficient to keep the available O2 of the blood unchanged throughout the observation period. The observations show that a 2,3-DPG mediated rise in PO2 50% very effectively contributes to maintenance of adequate tissue oxygenation during the post-natal fall in hemoglobin. The rise in 2,3-DPG and and PO2 50% may be due to the ordinary hypoxia-induced shift to the right of the hemoglobin O2 dissociation curve, as observed under other circumstances when blood hemoglobin is rapidly reduced, but the very marked rise in 2,3-DPG and the very low delta PO2 50%/delta 2,3-DPG ratio suggest that the rise may as well be due to hypoxia independent, pre-programmed processes. The fixed acid Bohr effect was essentially the same in newborn and adult rabbits, and was uninfluenced by large variations in 2,3-DPG.

  5. Lanthanide ions induce hydrolysis of hemoglobin-bound 2,3-diphosphoglycerate (2,3-DPG), conformational changes of globin and bidirectional changes of 2,3-DPG-hemoglobin's oxygen affinity.

    Science.gov (United States)

    Cheng, Y; Lin, H; Xue, D; Li, R; Wang, K

    2001-02-14

    The changes in structure and function of 2,3-diphosphoglycerate-hemoglobin (2,3-DPG-Hb) induced by Ln(3+) binding were studied by spectroscopic methods. The binding of lanthanide cations to 2,3-DPG is prior to that to Hb. Ln(3+) binding causes the hydrolysis of either one from the two phosphomonoester bonds in 2,3-DPG non-specifically. The results using the ultrafiltration method indicate that Ln(3+) binding sites for Hb can be classified into three categories: i.e. positive cooperative sites (N(I)), non-cooperative strong sites (N(S)) and non-cooperative weak sites (N(W)) with binding constants in decreasing order: K(I)>K(S)>K(W). The total number of binding sites amounts to about 65 per Hb tetramer. Information on reaction kinetics was obtained from the change of intrinsic fluorescence in Hb monitored by stopped-flow fluorometry. Fluctuation of fluorescence dependent on Ln(3+) concentration and temperature was observed and can be attributed to the successive conformational changes induced by Ln(3+) binding. The results also reveal the bidirectional changes of the oxygen affinity of Hb in the dependence on Ln(3+) concentration. At the range of [Ln(3+)]/[Hb]<2, the marked increase of oxygen affinity (P(50) decrease) with the Ln(3+) concentration can be attributed to the hydrolysis of 2,3-DPG, while the slight rebound of oxygen affinity in higher Ln(3+) concentration can be interpreted by the transition to the T-state of the Hb tetramer induced by Ln(3+) binding. This was indicated by the changes in secondary structure characterized by the decrease of alpha-helix content.

  6. Erythropoietin, 2,3 DPG, oxygen transport capacity, and altitude training in adolescent Alpine skiers.

    Science.gov (United States)

    Son, Hee Jeong; Kim, Hyo Jeong; Kim, Jin Hae; Ohno, Hideki; Kim, Chang Keun

    2012-01-01

    Rapid growth during adolescence caused by metabolic changes and their metabolic response to anaerobic and aerobic exercise differs considerably from that in adults and this is especially true in the responses to stresses, such as altitude exposure. However, there is little information on the suitability of exercise training at altitude for young athletes. Six male Korean adolescent alpine skiers (13-17 yr), with a skiing career of 3-5 yr, participated in the study. All subjects were exposed to an altitude of 2700 m (8858 ft) for 5 wk and altitude exposure consisted of 6 d/wk of training (4-5 h/d), with living quarters at 2100 m (-6890 ft) (Tignes, France). The 5 wk of ski training at altitude were maintained at the same level (the same number of slalom and giant slalom skiing trials) as at sea level. There was a significant increase in oxygen transport capacity, despite decreased erythropoietin (EPO) production (-31%) after altitude training. Red blood cell (RBC), hemoglobin (Hb), hematocrit (Hct), and 2,3 DPG concentrations increased significantly during altitude exposure and after return to sea level. Results indicate that applying altitude training in adolescent skiers may improve their endurance performance. However, EPO production during altitude training needs to be evaluated in larger future studies.

  7. Proceedings of the spring meeting of the Study Group for Electronic Instrumentation on April 3-5, 1995 in Juelich

    International Nuclear Information System (INIS)

    1995-06-01

    The 17 papers presented at the meeting give a survey of recent progress in the field of electronic instrumentation of scientific and technical measuring instruments, achieved at the research centers of KFA Juelich, TU Graz, HMI Berlin, Karlsruhe FZ, and Rossendorf FZ. (DG) [de

  8. The effect of pre-storage cooling on 2,3-DPG levels in red cells stored in SAG-M.

    Science.gov (United States)

    Llohn, Abid Hussain; Vetlesen, Annette; Fagerhol, Magne Kristoffer; Kjeldsen-Kragh, Jens

    2005-10-01

    The concentration of red cell 2,3-DPG (2,3-diphosphoglycerate) rapidly decreases during storage. A favourable effect on red cell 2,3-DPG has been demonstrated by rapid cooling of whole blood prior to storage. In our study we have investigated how different methods of cooling whole blood immediately after donation effect 2,3-DPG levels during storage. Thirty-six whole blood units (in 6 groups) of 450 ml were collected in 63 ml CPD. SAG-M was used as preservative solution for red cell concentrates (RCC). The units in one group were cooled down at ambient temperature, while units in the other groups were cooled down rapidly by different ways immediately after bleeding. Samples from the whole blood units were collected at various days during storage for 2,3-DPG measurements. The decline in 2,3-DPG during the first two weeks of storage was significantly slower in the groups which were cooled down rapidly to 17-18 degrees C within 1h after bleeding (all pDPG can be delayed significantly by cooling whole blood units rapidly after bleeding. Most of the methods we used in our study can easily be implemented in daily routine practise in any blood bank.

  9. Proceedings of the spring meeting of the Working Group for Electronic Instrumentation, Berlin, March 21 - 23, 1994. Summaries

    International Nuclear Information System (INIS)

    Gabriel, F.

    1994-07-01

    The SEI, working group for electronic instrumentation, is a platform for exchange of information and experience among electronics engineers from universities and research labs, particularly on subjects of interest in high-energy physics and nuclear electronics engineering. The abstracts of the 12 papers presented to the meeting cover aspects of current interest ranging from technology transfer to hardware description language to data processing to specific measuring and control instruments. (DG) [de

  10. Spring in the Arab Spring

    NARCIS (Netherlands)

    Borg, G.J.A.

    2011-01-01

    Column Gert Borg | Spring in the Arab Spring door dr. Gert Borg, onderzoeker bij Islam en Arabisch aan de Radboud Universiteit Nijmegen en voormalig directeur van het Nederlands-Vlaams Instituut Caïro Spring If, in Google, you type "Arab Spring" and hit the button, you get more than

  11. In vivo regeneration of red cell 2,3-diphosphoglycerate following transfusion of DPG-depleted AS-1, AS-3 and CPDA-1 red cells.

    Science.gov (United States)

    Heaton, A; Keegan, T; Holme, S

    1989-01-01

    Regeneration of 2,3-diphosphoglycerate (DPG) was determined following transfusion of DPG-depleted group O red cells into group A recipients. Blood from five donors was stored in the adenine-containing solutions CPDA-1, AS-1 or AS-3 for 35 d at 4 degrees C. Post-transfusion red cell DPG and ATP were measured in separated group O red cells over a 7 d period. The studies confirmed rapid in vivo DPG regeneration with greater than or equal to 50% of the maximum level being achieved within 7 h. An average of 95% of the recipients' pre-transfusion DPG level was achieved by 72 h and by 7 d mean (+/- SEM) DPG levels relative to recipient's pre-transfusion DPG averaged 84% (+/- 13%), 92% (+/- 17%) and 84% (+/- 21%) for CPDA-1, AS-1 and AS-3 red cells, respectively. Results were comparable to those previously reported for blood stored in ACD for 15-20 d (Valeri & Hirsch, 1969; Beutler & Wood, 1969). The immediate regeneration rate, V, closely approximated first order regeneration kinetics with AS-3 red cells exhibiting double the rate of CPDA-1 red cells (P less than 0.001). AS-1 red cells exhibited an intermediate rate of regeneration which was not significantly different compared to either CPDA-1 or AS-3 (P greater than 0.05). V exhibited a significant (P less than 0.05) positive correlation with ATP levels 5-7 h post-infusion. ATP regeneration of the infused cells was rapid with a mean increase of 1.2 mumol/g Hb above post-storage levels being achieved 1 h following transfusion.

  12. Preprint of the papers of the Spring 1997 Meeting of the Society of Naval Architects of Japan; Nippon zoen gakkai (1997 nen) shunki koen ronbun mazezuri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    This is a proceedings of the Spring 1997 Meeting of the Society of Naval Architects of Japan. It includes 21 papers on resistance, propulsion, movement and ocean relating to ships and floating structures. Recently, large floating structures have been regarded as promising as ocean structures having potential usability for floating airports, etc., and the response to lots of waves is being studied. The title `Numerical response analysis of a large pontoon-type or mat-type floating structure in regular waves` will be useful. Moreover, the pontoon-type floating body being proposed as the floating airport is very large having a length of 5,000m and a width of 1,000m, but very small having a thickness of 5m at thickest, several figures smaller than the dimension of the horizontal plane. Therefore, it is predicted that large elastic deformation is induced by dynamic external force such as waves. Accordingly, the title `On the prediction of hydroelastic behaviors of a huge floating structure in waves` is a useful paper.

  13. Preprint of the papers of the Spring 1997 Meeting of the Society of Naval Architects of Japan; Nippon zosen gakkai (1997 nen) shunki koen ronbun maezuri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    This is a proceedings of the Spring 1997 Meeting of the Society of Naval Architects of Japan. It includes 19 papers on structures, materials, welding, building, design and machinery of ships and floating structures. For the automation of ocean surveys, a development is conducted of cruising-type autonomous underwater vehicles (AUV). The following are important studies: `Development of a small cruising-type AUV and training of constant altitude swimming,` `Visual feedback navigation for cable tracking by autonomous underwater vehicles,` and `Development of the hull inspection robot (RTV-SHIP).` Large floating bodies for the ocean space utilization are being proposed, and the following are useful for strength analyses: `Structural analyses of very large semi-submersibles in waves,` `An investigation on the dynamic response and strength of very long floating structures by beam modeling on an elastic foundation` relating especially to pontoon-type floating bodies with no mooring, and `A basic investigation on deflection wave propagation and strength of very large floating structures.` The title `Temperature effect on corrosion fatigue strength of coated ship structural steel` is very useful for prevention of the hull corrosion.

  14. Spring Tire

    Science.gov (United States)

    Asnani, Vivake M.; Benzing, Jim; Kish, Jim C.

    2011-01-01

    The spring tire is made from helical springs, requires no air or rubber, and consumes nearly zero energy. The tire design provides greater traction in sandy and/or rocky soil, can operate in microgravity and under harsh conditions (vastly varying temperatures), and is non-pneumatic. Like any tire, the spring tire is approximately a toroidal-shaped object intended to be mounted on a transportation wheel. Its basic function is also similar to a traditional tire, in that the spring tire contours to the surface on which it is driven to facilitate traction, and to reduce the transmission of vibration to the vehicle. The essential difference between other tires and the spring tire is the use of helical springs to support and/or distribute load. They are coiled wires that deform elastically under load with little energy loss.

  15. Just Spring

    CERN Document Server

    Konda, Madhusudhan

    2011-01-01

    Get a concise introduction to Spring, the increasingly popular open source framework for building lightweight enterprise applications on the Java platform. This example-driven book for Java developers delves into the framework's basic features, as well as advanced concepts such as containers. You'll learn how Spring makes Java Messaging Service easier to work with, and how its support for Hibernate helps you work with data persistence and retrieval. Throughout Just Spring, you'll get your hands deep into sample code, beginning with a problem that illustrates dependency injection, Spring's co

  16. Beginning Spring

    CERN Document Server

    Caliskan, Mert

    2015-01-01

    Get up to speed quickly with this comprehensive guide toSpring Beginning Spring is the complete beginner's guide toJava's most popular framework. Written with an eye towardreal-world enterprises, the book covers all aspects of applicationdevelopment within the Spring Framework. Extensive samples withineach chapter allow developers to get up to speed quickly byproviding concrete references for experimentation, building askillset that drives successful application development byexploiting the full capabilities of Java's latest advances. Spring provides the exact toolset required to build anent

  17. NR sulphur vulcanization: Interaction study between TBBS and DPG by means of a combined experimental rheometer and meta-model best fitting strategy

    Energy Technology Data Exchange (ETDEWEB)

    Milani, G., E-mail: gabriele.milani@polimi.it [Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milan (Italy); Hanel, T.; Donetti, R. [Pirelli Tyre, Via Alberto e Piero Pirelli 25, 20126 Milan (Italy); Milani, F. [Chem. Co, Via J.F. Kennedy 2, 45030 Occhiobello (Italy)

    2016-06-08

    The paper is aimed at studying the possible interaction between two different accelerators (DPG and TBBS) in the chemical kinetic of Natural Rubber (NR) vulcanized with sulphur. The same blend with several DPG and TBBS concentrations is deeply analyzed from an experimental point of view, varying the curing temperature in the range 150-180°C and obtaining rheometer curves with a step of 10°C. In order to study any possible interaction between the two accelerators –and eventually evaluating its engineering relevance-rheometer data are normalized by means of the well known Sun and Isayev normalization approach and two output parameters are assumed as meaningful to have an insight into the possible interaction, namely time at maximum torque and reversion percentage. Two different numerical meta-models, which belong to the family of the so-called response surfaces RS are compared. The first is linear against TBBS and DPG and therefore well reproduces no interaction between the accelerators, whereas the latter is a non-linear RS with bilinear term. Both RS are deduced from standard best fitting of experimental data available. It is found that, generally, there is a sort of interaction between TBBS and DPG, but that the error introduced making use of a linear model (no interaction) is generally lower than 10%, i.e. fully acceptable from an engineering standpoint.

  18. Meeting

    Indian Academy of Sciences (India)

    July 1989 No.19 Newsletter of the Indian Academy of Sciences. 55th Annual. Meeting ... in the world, keeping alive atthe same time his research interests, abreast .... theory made a comeback with many new ideas and with the success of the ...

  19. Spring performance tester for miniature extension springs

    Science.gov (United States)

    Salzbrenner, Bradley; Boyce, Brad

    2017-05-16

    A spring performance tester and method of testing a spring are disclosed that has improved accuracy and precision over prior art spring testers. The tester can perform static and cyclic testing. The spring tester can provide validation for product acceptance as well as test for cyclic degradation of springs, such as the change in the spring rate and fatigue failure.

  20. DGMK spring meeting of the 'Exploration and Production' department. Authors' manuscripts; DGMK-Fruehjahrstagung des Fachbereichs 'Aufsuchung und Gewinnung'. Autorenmanuskripte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The spring meeting of the Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle e.V. focused on exploration and production. Papers were presented on exploration and production in general, geology, deposit development, extraction of petroleum/natural gas, drilling, underground storage, geophysics and geochemistry. [German] Die Fruehjahrstagung der Deutschen Wissenschaftlichen Gesellschaft fuer Erdoel, Erdgas und Kohle e.V. wurde vom Fachbereich ''Aufsuchung und Gewinnung'' bestimmt. Die Vortraege beschaeftigten sich mit den Gebieten Exploration and Production allgemein, Geologie, Lagerstaettentechnik, Foerdertechnik fuer Erdoel/Erdgas, Bohrtechnik, Untertagesspeichertechnik, Geophysik und Geochemie.

  1. A fit-for-purpose LC-MS/MS method for the simultaneous quantitation of ATP and 2,3-DPG in human K2EDTA whole blood.

    Science.gov (United States)

    Kim, Hyeryun; Kosinski, Penelope; Kung, Charles; Dang, Lenny; Chen, Yue; Yang, Hua; Chen, Yuan-Shek; Kramer, Jordyn; Liu, Guowen

    2017-09-01

    Many hemolytic anemias results in major metabolic abnormalities: two common metabolite abnormalities include increased levels of 2,3-diphosphoglycerate (2,3-DPG) and decreased levels of adenosine triphosphate (ATP). To better monitor the concentration changes of these metabolites, the development of a reliable LC-MS/MS method to quantitatively profile the concentrations of 2, 3-DPG and ATP in whole blood is essential to understand the effects of investigational therapeutics. Accurate quantification of both compounds imposes great challenges to bioanalytical scientists due to their polar, ionic and endogenous nature. Here we present an LC-MS/MS method for the reliable quantification of 2,3-DPG and ATP from K 2 EDTA human whole blood (WB) simultaneously. Whole blood samples were spiked with stable isotope labeled internal standards, processed by protein precipitation extraction, and analyzed using zwitterionic ion chromatography-hydrophilic interaction chromatography (ZIC-HILIC) coupled with tandem mass spectrometry. The linear analytical range of the assay was 50-3000μg/mL. The fit-for-purpose method demonstrated excellent accuracy and precision. The overall accuracy was within ±10.5% (%RE) for both analytes and the intra- and inter-assay precision (%CV) were less than 6.7% and 6.2% for both analytes, respectively. ATP and 2,3-DPG were found to be stable in human K 2 EDTA blood for at least 8h at 4°C, 96days when stored at -70°C and after three freeze/thaw cycles. The assay has been successfully applied to K 2 EDTA human whole blood samples to support clinical studies. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. DGMK/OeGEW spring meeting of the exploration and production department. Proceedings; DGMK/OeGEW-Fruehjahrstagung des Fachbereichs Aufsuchung und Gewinnung. Tagungsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Within the spring meeting 2009 of the exploration and production department of the German Society and Coal Science and Technology (DGMK, Hamburg, Federal Republic of Germany) and the Austrian Society of Petroleum Sciences (OeGEW, Vienna, Austria) at 27th and 28th April, 2009, in Celle (Federal Republic of Germany), the following lectures were held: (1) Natural gas for Europe - Where does it come from, and how safe is it?; (2) Fluid dynamics in salt-encased carbonates; (3) Predicting petroleum fluid quality and quantity by using the PhaseKinetic approach for a basin modelling study in the Jeanne d'Arc Basin, offshore Newfoundland, Canada; (4) Models of geomechanical reservoirs for the prognosis of tectonic stresses and crack grids - concept and case study from the Sirte Basin / Libya; (5) A depositional model and sequence stratigraphic correlation for Ordovician glacial deposits, Illizi Basin, Algeria; (6) Palynology of the upper Silurian to Middle Devonian of wells from the Reggane Basin, southern Algeria; (7) Evaluation of heterogeneities in petroleum deposits by mans of asphaltene; (8) Experiments to reactions of n-alkanes with hematite in clastic reservoir rocks; (9) Organic geochemical characterization of terrestrial source rocks of the Triassic Madygen Formation (Southern Tien Shan, Kyrgyzstan); (10) Mud Volcanoes of Azerbaijan - Organic chemistry of ejected sediments; (11) Seismoelectric signatures for the determination of depositional parameters; (12) A workflow for the processing and imaging of Reflexion seismic data with CRS attributes; (13) Detection of altitude variations during production of natural gas or petroleum in the area of the San Jorge Basin by means of satellite radar interferometry; (14) (S)PWD - Development of a high resolution system for seismic exploratory work in the deep drilling; (15) Development of a discontinuum mechanics based computer algorithm in the FDM program FLAC3D for Frac dispersion in tigt gas reservoirs; (16) A fresh

  3. Proceedings of the Spring Meeting of the Society of Naval Architects of Japan (1996). Part 2. Structure, materials, welding, construction, and design; Nihon zosen gakkai (1996 nen) shunki koen ronbun maezuri. 2. Kozo, zairyo, yosetsu, kosaku, sekkei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This is a proceedings of the Spring Meeting of the Society of Naval Architects of Japan made public on May 15 and 16, 1996. In the basic research, the following are included: Basic studies on computer aided concurrent engineering for hull structure design and piping design; Fundamental study on the new method to estimate vibration level on a ship; Flat plate approximation in the three-dimensional slamming; Development of new finite element by source method, etc. As to fracture and cracks, Equivalent CTOD concept based on the local approach and its application to fracture performance evaluation of welded joints; Fracture mechanical modeling of brittle crack propagation and arrest of steel; An evaluation method for ductile crack propagation in pre-strained plates; Multiple fatigue cracks propagating in a stiffened panel, etc. Relating to fatigue strength, Fatigue life estimation of welded joints of an aluminum alloy under superimposed random load waves; Study on unified fatigue strength assessment method for welded structure, etc.

  4. Proceedings of the Spring Meeting of the Society of Naval Architects of Japan (1996). Part 2. Structure, materials, welding, construction, and design; Nihon zosen gakkai (1996 nen) shunki koen ronbun maezuri. 2. Kozo, zairyo, yosetsu, kosaku, sekkei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This is a proceedings of the Spring Meeting of the Society of Naval Architects of Japan made public on May 15 and 16, 1996. In the basic research, the following are included: Basic studies on computer aided concurrent engineering for hull structure design and piping design; Fundamental study on the new method to estimate vibration level on a ship; Flat plate approximation in the three-dimensional slamming; Development of new finite element by source method, etc. As to fracture and cracks, Equivalent CTOD concept based on the local approach and its application to fracture performance evaluation of welded joints; Fracture mechanical modeling of brittle crack propagation and arrest of steel; An evaluation method for ductile crack propagation in pre-strained plates; Multiple fatigue cracks propagating in a stiffened panel, etc. Relating to fatigue strength, Fatigue life estimation of welded joints of an aluminum alloy under superimposed random load waves; Study on unified fatigue strength assessment method for welded structure, etc.

  5. Carbohydrate metabolism in Antarctic birds' erythrocytes: Levels of IP5 and 2,3-DPG and their effect on chicken hexokinase activity

    Directory of Open Access Journals (Sweden)

    Edson Rodrigues

    1998-03-01

    Full Text Available The aim of the present study is to show the possible implication of organic phosphate metabolites=namely inositol pentaphosphate (IP5 and 2,3-bisphosphoglycerate (2,3-DPG=in the glucose metabolism displayed by birds erythrocytes. For this purpose, a preparation of hexokinase (HK has been purified from chicken erythrocytes (RBC by affinity chromatography in Sepharose-N-aminohexanoyl glucosamine and used for kinetic experiments. It has been shown that IP5 is a competitive inhibitor of HK in regard to Mg^, but not in regard to glucose and MgATP^. On the other hand, this preparation of HK is also competitively inhibited by ATP^. It has been found that the total intracellular content of Mg^ (2.76μmol/ml is lower than the total value for the content of ATP and IP5 found in a standard packed red blood cell suspension.

  6. Proceedings of the Spring Meeting of the Society of Naval Architects of Japan (1996). Part 1. Resistance, propulsion, advance, and ocean; Nihon zosen gakkai (1996 nen) shunki koen ronbun maezuri. 1. Teiko, suishin shindo, kaiyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This is a proceedings of the Spring Meeting of the Society of Naval Architects of Japan made public on May 15 and 16, 1996. In the basic research, the following were included: Numerical simulation for submerged body fitted with hydrofoil; Simulation of tandem hydrofoils by finite volume method with moving grid system; Determination of the unknown method surface of planning plates by a formulation based on high aspect ratio approximation; Numerical simulation of a bubble flow by modified density function method, etc. As to floating bodies, Response characteristics of a long life type floating offshore airport in waves (3rd report: Response due to short waves and an attempt of active inclination control); Feasibility design of a floating airport and estimation of environmental forces on it; On the estimation method of hydrodynamic forces acting on a huge floating structure, etc. In addition, A numerical prediction with `DMDF` model of pack ice motion in the Okhotsk Sea; Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Water entry simulation of free-fall lifeboat, etc.

  7. Proceedings of the Spring Meeting of the Society of Naval Architects of Japan (1996). Part 1. Resistance, propulsion, advance, and ocean; Nihon zosen gakkai (1996 nen) shunki koen ronbun maezuri. 1. Teiko, suishin shindo, kaiyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This is a proceedings of the Spring Meeting of the Society of Naval Architects of Japan made public on May 15 and 16, 1996. In the basic research, the following were included: Numerical simulation for submerged body fitted with hydrofoil; Simulation of tandem hydrofoils by finite volume method with moving grid system; Determination of the unknown method surface of planning plates by a formulation based on high aspect ratio approximation; Numerical simulation of a bubble flow by modified density function method, etc. As to floating bodies, Response characteristics of a long life type floating offshore airport in waves (3rd report: Response due to short waves and an attempt of active inclination control); Feasibility design of a floating airport and estimation of environmental forces on it; On the estimation method of hydrodynamic forces acting on a huge floating structure, etc. In addition, A numerical prediction with `DMDF` model of pack ice motion in the Okhotsk Sea; Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Water entry simulation of free-fall lifeboat, etc.

  8. Characteristics of novel polymer based on pseudo-polyamino acids GluLa-DPG-PEG600: binding of albumin, biocompatibility, biodistribution and potential crossing the blood-brain barrier in rats

    Directory of Open Access Journals (Sweden)

    B. O. Chekh

    2017-08-01

    Full Text Available The aim of our work was to study biological properties of the polymer based on pseudo-polyamino acids GluLa-DPG-PEG600, its ability to bind albumin, as well as its localization in rat body and influence on physio­logical and functional state of rat kidneys and liver. We have found the ability of GluLa-DPG-PEG600 to bind bovine serum albumin (BSA using electrophoresis in 5% polyacrylamide gel. Structural and functional state of the liver and kidneys of rats after injections of polymer were investigated by histological analysis of organs and determination the activities of alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, gamma-glutamyltransferase and content of cholesterol and creatinine in blood. Our results showed little toxic effect of GluLa-DPG-PEG600 on rat body. Using fluorescent microscopy we have studied polymer in complex with BSA distribution in rat body: after intravenous injection polymer are localized in kidneys and spleen, and after intramuscular – in liver and brain. It has been shown that polymer passed through the blood-brain barrier and are localized in the immune organ – spleen, indicating GluLa-DPG-PEG600 as a potential drug transporter.

  9. Thermal springs of Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Breckenridge, R.M.; Hinckley, B.S.

    1978-01-01

    This bulletin attempts, first, to provide a comprehensive inventory of the thermal springs of Wyoming; second, to explore the geologic and hydrologic factors producing these springs; and, third, to analyze the springs collectively as an indicator of the geothermal resources of the state. A general discussion of the state's geology and the mechanisms of thermal spring production, along with a brief comparison of Wyoming's springs with worldwide thermal features are included. A discussion of geothermal energy resources, a guide for visitors, and an analysis of the flora of Wyoming's springs follow the spring inventory. The listing and analysis of Wyoming's thermal springs are arranged alphabetically by county. Tabulated data are given on elevation, ownership, access, water temperature, and flow rate. Each spring system is described and its history, general characteristics and uses, geology, hydrology, and chemistry are discussed. (MHR)

  10. European supply chain for valve springs

    Energy Technology Data Exchange (ETDEWEB)

    Barthold, G. [Scherdel GmbH, Marktredwitz (Germany); Thureborn, D.; Hallberg, M. [Haldex Garphyttan AB (Sweden); Janssen, P. [Mittal Steel Ruhrort GmbH / Mittal Steel Hochfeld GmbH (Germany)

    2005-07-01

    Forced by the Kobe earthquake in 1995 and the lack of valve spring steel on the world market due to damages of the Kobe steel plant, the development of a European supply chain has been sped up. End of 1994 a super clean valve spring steel with a reasonable quality from a European source was available. A strong relationship between the steel producer (Mittal), the wire manufacturer (Haldex Garphyttan) and the spring maker (Scherdel) was established. A working group of the three companies holds meetings on a regular basis to discuss quality and development issues. Over the last years the supply chain has achieved significant improvements in terms of cleanliness and decarburisation of the wire rod. The continuous common advancement of the valve spring quality has enabled the valve spring failures in the field to be reduced to < 0.1 ppm. The development and market launch of new grades has been prepared. (orig.)

  11. Instant Spring Tool Suite

    CERN Document Server

    Chiang, Geoff

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

  12. 2015 Materials Research Society Spring Meeting

    Science.gov (United States)

    2016-05-12

    States; 2, , Colorado School of Mines , Golden, Colorado, United States. Show Abstract 10:00 AM - BREAK Show Abstract FF7: Roles of Defects in Compound...Nanoparticles for Gold Mining Weizheng Shen1 2, Sibel Cetinel1 2, Carlo Montemagno1 2. 1, , Ingenuity Lab, Edmonton, Alberta, Canada; 2, Chemical...California-Irvine, Irvine, California, United States. Show Abstract 8:00 PM - GG5.10 Selective Virus Separation with Conductive Inverse Opal Films Chia

  13. Pro Spring Batch

    CERN Document Server

    Minella, Michael T

    2011-01-01

    Since its release, Spring Framework has transformed virtually every aspect of Java development including web applications, security, aspect-oriented programming, persistence, and messaging. Spring Batch, one of its newer additions, now brings the same familiar Spring idioms to batch processing. Spring Batch addresses the needs of any batch process, from the complex calculations performed in the biggest financial institutions to simple data migrations that occur with many software development projects. Pro Spring Batch is intended to answer three questions: *What? What is batch processing? What

  14. Spring 5 & reactive streams

    CERN Multimedia

    CERN. Geneva; Clozel, Brian

    2017-01-01

    Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

  15. Chemical and Hydro-Geologic Analysis of Ikogosi Warm Spring Water in Nigeria

    OpenAIRE

    Akinola Ikudayisi; Folasade Adeyemo; Josiah Adeyemo

    2015-01-01

    This study focuses on the hydro-geology and chemical constituents analysis of Ikogosi Warm Spring waters in South West Nigeria. Ikogosi warm spring is a global tourist attraction because it has both warm and cold spring sources. Water samples from the cold spring, warm spring and the meeting point were collected, analyzed and the result shows close similarity in temperature, hydrogen iron concentration (pH), alkalinity, hardness, Calcium, Magnesium, Sodium, Iron, total di...

  16. Spring integration essentials

    CERN Document Server

    Pandey, Chandan

    2015-01-01

    This book is intended for developers who are either already involved with enterprise integration or planning to venture into the domain. Basic knowledge of Java and Spring is expected. For newer users, this book can be used to understand an integration scenario, what the challenges are, and how Spring Integration can be used to solve it. Prior experience of Spring Integration is not expected as this book will walk you through all the code examples.

  17. The first CERN Spring Campus

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

  18. Pro Spring Integration

    CERN Document Server

    Lui, M; Chan, Andy; Long, Josh

    2011-01-01

    Pro Spring Integration is an authoritative book from the experts that guides you through the vast world of enterprise application integration (EAI) and application of the Spring Integration framework towards solving integration problems. The book is:. * An introduction to the concepts of enterprise application integration * A reference on building event-driven applications using Spring Integration * A guide to solving common integration problems using Spring Integration What makes this book unique is its coverage of contemporary technologies and real-world information, with a focus on common p

  19. Coil spring venting arrangement

    International Nuclear Information System (INIS)

    McCugh, R.M.

    1975-01-01

    A simple venting device for trapped gas pockets in hydraulic systems is inserted through a small access passages, operated remotely, and removed completely. The device comprises a small diameter, closely wound coil spring which is pushed through a guide temporarily inserted in the access passage. The guide has a central passageway which directs the coil spring radially upward into the pocket, so that, with the guide properly positioned for depth and properly oriented, the coil spring can be pushed up into the top of the pocket to vent it. By positioning a seal around the free end of the guide, the spring and guide are removed and the passage is sealed

  20. News Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

    Science.gov (United States)

    2011-05-01

    Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

  1. Mockito for Spring

    CERN Document Server

    Acharya, Sujoy

    2015-01-01

    If you are an application developer with some experience in software testing and want to learn more about testing frameworks, then this technology and book is for you. Mockito for Spring will be perfect as your next step towards becoming a competent software tester with Spring and Mockito.

  2. Learning Spring application development

    CERN Document Server

    Soni, Ravi Kant

    2015-01-01

    This book is intended for those who are interested in learning the core features of the Spring Framework. Prior knowledge of Java programming and web development concepts with basic XML knowledge is expected.

  3. Cyanobacteria in ambient springs

    Czech Academy of Sciences Publication Activity Database

    Cantonati, M.; Komárek, Jiří; Montejano, G.

    2015-01-01

    Roč. 24, č. 4 (2015), s. 865-888 ISSN 0960-3115 Institutional support: RVO:67985939 Keywords : Springs * Cyanoprokaryotes * Radiation * Nitrogen Subject RIV: EF - Botanics Impact factor: 2.258, year: 2015

  4. Spring Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Spring Bottom Trawl Survey was initiated in 1968 and covered an area from Cape Hatteras, NC, to Nova Scotia, Canada, at depths >27m....

  5. Masters of the springs

    DEFF Research Database (Denmark)

    Laursen, Steffen

    2010-01-01

    flanked by villages that relied on these water recourses for agricultural production. The springs emerged in the zone separating the cemeteries from the settlements. The freshwater springs were actively incorporated into the religious landscape of the dead, by consistently erecting mounds of a particular...... for water - a process which perhaps also is evidenced by temple constructions at Barbar, Umm al-Sujur and Abu Zaydan....

  6. Abstracts of papers presented at the LVIII Cold Spring Harbor Symposium on quantitative Biology: DNA and chromosomes

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This volume contains the abstracts of oral and poster presentations made at the LVIII Cold Spring Harbor Symposium on Quantitative Biology entitles DNA & Chromosomes. The meeting was held June 2--June 9, 1993 at Cold Spring Harbor, New York.

  7. Leopold Fellows meet

    Science.gov (United States)

    Hartmann, Dennis L.

    Communicating the results of environmental science research to nonscientists was the focus of a week-long meeting of fellows of the Aldo Leopold Leadership Program (ALLP) in June. Participating were 20 mid-career university facultymembers, the first group of ALLP fellows to be selected.Discussions were held on the role of scientists in society, techniques for effective leadership, improving communications skills, and working productively with news media. The training program considers both print and broadcast media as well as other outreach vehicles. The meeting was held at Kah Nee Ta Resort on the Warm Springs Indian Reservation, Warm Springs, Oregon, June 15-21, 1999.

  8. Pro Spring security

    CERN Document Server

    Scarioni, Carlo

    2013-01-01

    Security is a key element in the development of any non-trivial application. The Spring Security Framework provides a comprehensive set of functionalities to implement industry-standard authentication and authorization mechanisms for Java applications. Pro Spring Security will be a reference and advanced tutorial that will do the following: Guides you through the implementation of the security features for a Java web application by presenting consistent examples built from the ground-up. Demonstrates the different authentication and authorization methods to secure enterprise-level applications

  9. Instant Spring security starter

    CERN Document Server

    Jagielski, Piotr

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A concise guide written in an easy-to-follow format following the Starter guide approach.This book is for people who have not used Spring Security before and want to learn how to use it effectively in a short amount of time. It is assumed that readers know both Java and HTTP protocol at the level of basic web programming. The reader should also be familiar with Inversion-of-Control/Dependency Injection, preferably with the Spring framework itsel

  10. Mercury content in Hot Springs

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, R

    1974-01-01

    A method of determination of mercury in hot spring waters by flameless atomic absorption spectrophotometry is described. Further, the mercury content and the chemical behavior of the elementary mercury in hot springs are described. Sulfide and iodide ions interfered with the determination of mercury by the reduction-vapor phase technique. These interferences could, however, be minimized by the addition of potassium permanganate. Waters collected from 55 hot springs were found to contain up to 26.0 ppb mercury. High concentrations of mercury have been found in waters from Shimoburo Springs, Aomori (10.0 ppb), Osorezan Springs, Aomori (1.3 approximately 18.8 ppb), Gosyogake Springs, Akita (26.0 ppb), Manza Springs, Gunma (0.30 approximately 19.5 ppb) and Kusatu Springs, Gunma (1.70 approximately 4.50 ppb). These hot springs were acid waters containing a relatively high quantity of chloride or sulfate.

  11. A Quadratic Spring Equation

    Science.gov (United States)

    Fay, Temple H.

    2010-01-01

    Through numerical investigations, we study examples of the forced quadratic spring equation [image omitted]. By performing trial-and-error numerical experiments, we demonstrate the existence of stability boundaries in the phase plane indicating initial conditions yielding bounded solutions, investigate the resonance boundary in the [omega]…

  12. Spring batch essentials

    CERN Document Server

    Rao, P Raja Malleswara

    2015-01-01

    If you are a Java developer with basic knowledge of Spring and some experience in the development of enterprise applications, and want to learn about batch application development in detail, then this book is ideal for you. This book will be perfect as your next step towards building simple yet powerful batch applications on a Java-based platform.

  13. Studying Springs in Series Using a Single Spring

    Science.gov (United States)

    Serna, Juan D.; Joshi, Amitabh

    2011-01-01

    Springs are used for a wide range of applications in physics and engineering. Possibly, one of their most common uses is to study the nature of restoring forces in oscillatory systems. While experiments that verify Hooke's law using springs are abundant in the physics literature, those that explore the combination of several springs together are…

  14. Spring-recharging in the Himalayas

    International Nuclear Information System (INIS)

    Joshi, Anil P.

    2009-01-01

    in the settlement of mountain villages in the Himalayas. In fact, in many places, it was the single factor that determined the location of the villages and naturally rainwater has been the source which recharge the catchments of the springs. Forest cover keeps these catchment areas alive for the slow and constant recharging of the springs. In the recent past due to continuous deforestation, the catchment areas have been drastically reduced. Eventually, these denuded lands were unable to conserve water, which has resulted in the drying-up and dying of many mountain springs. Certainly, this became a major threat to both the natural habitats of the springs, as well as to the survival of the communities. In order to meet the water needs of the villages, the government-development agencies devised a distribution system in which water was diverted from regions with an adequate supply to those deprived of water. This approach to remedy the water shortage brought about significant water conflicts, as the rights to water resources were not well defined. This system also did not adequately address water-management and distribution lines for the water resources

  15. Bioinspired spring origami

    Science.gov (United States)

    Faber, Jakob A.; Arrieta, Andres F.; Studart, André R.

    2018-03-01

    Origami enables folding of objects into a variety of shapes in arts, engineering, and biological systems. In contrast to well-known paper-folded objects, the wing of the earwig has an exquisite natural folding system that cannot be sufficiently described by current origami models. Such an unusual biological system displays incompatible folding patterns, remains open by a bistable locking mechanism during flight, and self-folds rapidly without muscular actuation. We show that these notable functionalities arise from the protein-rich joints of the earwig wing, which work as extensional and rotational springs between facets. Inspired by this biological wing, we establish a spring origami model that broadens the folding design space of traditional origami and allows for the fabrication of precisely tunable, four-dimensional–printed objects with programmable bioinspired morphing functionalities.

  16. Hot springs in Hokuriku District

    Energy Technology Data Exchange (ETDEWEB)

    Sato, K. (Hot Springs Research Center, Japan)

    1971-01-01

    In the Hokuriku district including Toyama, Ishikawa, and Fukui Prefectures, hot springs of more than 25/sup 0/C were investigated. In the Toyama Prefecture, there are 14 hot springs which are located in an area from the Kurobe River to the Tateyama volcano and in the mountainous area in the southwest. In Ishikawa Prefecture there are 16 hot springs scattered in Hakusan and its vicinity, the Kaga mountains, and in the Noto peninsula. In northern Fukui Prefecture there are seven hot springs. The hot springs in Shirakawa in Gifu Prefecture are characterized as acid springs producing exhalations and H/sub 2/S. These are attributed to the Quaternary volcanoes. The hot springs of Wakura, Katayamazu, and Awara in Ishikawa Prefecture are characterized by a high Cl content which is related to Tertiary andesite. The hot springs of Daishoji, Yamanaka, Yamashiro, Kuritsu, Tatsunokuchi, Yuwaku, and Yunotani are characterized by a low HCO/sub 3/ content. The Ca and SO/sub 4/ content decreases from east to west, and the Na and Cl content increases from west to east. These fluctuations are related to the Tertiary tuff and rhyolite. The hot springs of Kuronagi, Kinshu, and Babadani, located along the Kurobe River are characterized by low levels of dissolved components and high CO/sub 2/ and HCO/sub 3/ content. These trends are related to late Paleozoic granite. Hot springs resources are considered to be connected to geothermal resources. Ten tables, graphs, and maps are provided.

  17. Weldon Spring dose calculations

    International Nuclear Information System (INIS)

    Dickson, H.W.; Hill, G.S.; Perdue, P.T.

    1978-09-01

    In response to a request by the Oak Ridge Operations (ORO) Office of the Department of Energy (DOE) for assistance to the Department of the Army (DA) on the decommissioning of the Weldon Spring Chemical Plant, the Health and Safety Research Division of the Oak Ridge National Laboratory (ORNL) performed limited dose assessment calculations for that site. Based upon radiological measurements from a number of soil samples analyzed by ORNL and from previously acquired radiological data for the Weldon Spring site, source terms were derived to calculate radiation doses for three specific site scenarios. These three hypothetical scenarios are: a wildlife refuge for hunting, fishing, and general outdoor recreation; a school with 40 hr per week occupancy by students and a custodian; and a truck farm producing fruits, vegetables, meat, and dairy products which may be consumed on site. Radiation doses are reported for each of these scenarios both for measured uranium daughter equilibrium ratios and for assumed secular equilibrium. Doses are lower for the nonequilibrium case

  18. Nutrition Frontiers - Spring 2017 | Division of Cancer Prevention

    Science.gov (United States)

    Volume 8, Issue 2 Dear Colleague, The spring issue of Nutrition Frontiers showcases the calcium/magnesium intake ratio in colorectal adenoma, the role of PPARγ in metabolism and reproduction, and the effects of time-restricted feeding on metabolic parameters. Meet our spotlight investigator, Dr. Maria Cruz-Correa, and her research on gut bacterial genes, diet, and colorectal

  19. Nutrition Frontiers - Spring 2018 | Division of Cancer Prevention

    Science.gov (United States)

    Dear Colleague, The spring issue of Nutrition Frontiers showcases the association of gut microbial communities in premenopausal women, how high-fat, high-calorie-diet-induced obesity may increase pancreatic cancer, and the effects of calorie restriction protocols on pro-inflammatory cytokines. Meet our spotlight investigator, Dr. Purnima Kumar, and her research on black

  20. Spring viremia of carp

    Science.gov (United States)

    Ahne, W.; Bjorklund, H.V.; Essbauer, S.; Fijan, N.; Kurath, G.; Winton, J.R.

    2002-01-01

    pring viremia of carp (SVC) is an important disease affecting cyprinids, mainly common carp Cyprinus carpio. The disease is widespread in European carp culture, where it causes significant morbidity and mortality. Designated a notifiable disease by the Office International des Epizooties, SVC is caused by a rhabdovirus, spring viremia of carp virus (SVCV). Affected fish show destruction of tissues in the kidney, spleen and liver, leading to hemorrhage, loss of water-salt balance and impairment of immune response. High mortality occurs at water temperatures of 10 to 17°C, typically in spring. At higher temperatures, infected carp develop humoral antibodies that can neutralize the spread of virus and such carp are protected against re-infection by solid immunity. The virus is shed mostly with the feces and urine of clinically infected fish and by carriers. Waterborne transmission is believed to be the primary route of infection, but bloodsucking parasites like leeches and the carp louse may serve as mechanical vectors of SVCV. The genome of SVCV is composed of a single molecule of linear, negative-sense, single-stranded RNA containing 5 genes in the order 3¹-NPMGL-5¹ coding for the viral nucleoprotein, phosphoprotein, matrix protein, glycoprotein, and polymerase, respectively. Polyacrylamide gel electrophoresis of the viral proteins, and sequence homologies between the genes and gene junctions of SVCV and vesicular stomatitis viruses, have led to the placement of the virus as a tentative member of the genus Vesiculovirus in the family Rhabdoviridae. These methods also revealed that SVCV is not related to fish rhabdoviruses of the genus Novirhabdovirus. In vitro replication of SVCV takes place in the cytoplasm of cultured cells of fish, bird and mammalian origin at temperatures of 4 to 31°C, with an optimum of about 20°C. Spring viremia of carp can be diagnosed by clinical signs, isolation of virus in cell culture and molecular methods. Antibodies directed

  1. Developing bulk exchange spring magnets

    Science.gov (United States)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  2. Outlier loci detect intraspecific biodiversity amongst spring and autumn spawning herring across local scales

    DEFF Research Database (Denmark)

    Bekkevold, Dorte; Gross, Riho; Arula, Timo

    2016-01-01

    Herring, Clupea harengus, is one of the ecologically and commercially most important species in European northern seas, where two distinct ecotypes have been described based on spawning time; spring and autumn. To date, it is unknown if these spring and autumn spawning herring constitute genetica...... of these co-occurring ecotypes to meet requirements for sustainable exploitation and ensure optimal livelihood for coastal communities....

  3. Tips for Staying Healthy While Traveling this Spring (and Summer, and Fall) | Poster

    Science.gov (United States)

    Spring is here again, and with it come scientific meetings and spring vacations. Some of the scientists and staff at NCI at Frederick will be traveling across the globe in the next few months, so Occupational Health Services would like to share a few tips for staying healthy while traveling.

  4. Spring security 3.x cookbook

    CERN Document Server

    Mankale, Anjana

    2013-01-01

    This book follows a cookbook style exploring various security solutions provided by Spring Security for various vulnerabilities and threat scenarios that web applications may be exposed to at the authentication and session level layers.This book is for all Spring-based application developers as well as Java web developers who wish to implement robust security mechanisms into web application development using Spring Security.Readers are assumed to have a working knowledge of Java web application development, a basic understanding of the Spring framework, and some knowledge of the fundamentals o

  5. Spheres of discharge of springs

    Science.gov (United States)

    Springer, Abraham E.; Stevens, Lawrence E.

    2009-02-01

    Although springs have been recognized as important, rare, and globally threatened ecosystems, there is as yet no consistent and comprehensive classification system or common lexicon for springs. In this paper, 12 spheres of discharge of springs are defined, sketched, displayed with photographs, and described relative to their hydrogeology of occurrence, and the microhabitats and ecosystems they support. A few of the spheres of discharge have been previously recognized and used by hydrogeologists for over 80 years, but others have only recently been defined geomorphologically. A comparison of these spheres of discharge to classification systems for wetlands, groundwater dependent ecosystems, karst hydrogeology, running waters, and other systems is provided. With a common lexicon for springs, hydrogeologists can provide more consistent guidance for springs ecosystem conservation, management, and restoration. As additional comprehensive inventories of the physical, biological, and cultural characteristics are conducted and analyzed, it will eventually be possible to associate spheres of discharge with discrete vegetation and aquatic invertebrate assemblages, and better understand the habitat requirements of rare or unique springs species. Given the elevated productivity and biodiversity of springs, and their highly threatened status, identification of geomorphic similarities among spring types is essential for conservation of these important ecosystems.

  6. Spring valve for well completion

    Energy Technology Data Exchange (ETDEWEB)

    Gorbatov, P T

    1966-07-22

    A spring-loaded valve for well completion consists of a housing with a spring-loaded closing element. In order to protect the closing element from corrosion which might lower the pressure drop, the closing element is made in the form of a piston. It is tightly connected with sealing elements. The housing has orifices, overlapping the piston in the initial position.

  7. Experimenting with Inexpensive Plastic Springs

    Science.gov (United States)

    Perez, Leander; Marques, Adriana; Sánchez, Iván

    2014-01-01

    Acommon undergraduate laboratory experience is the determination of the elastic constant of a spring, whether studying the elongation under a static load or studying the damped harmonic motion of the spring with a suspended mass. An alternative approach to this laboratory experience has been suggested by Menezes et al., aimed at studying the…

  8. Evaluation of the cleanness of SiCr-spring steels for suspension springs

    Energy Technology Data Exchange (ETDEWEB)

    Valentin, P.; Blaesius, A.; Bruch, C. [Saarstahl AG, Voelklingen (Germany)

    2005-07-01

    The requirements of suspension springs for the automotive industry are increasing with regard to cleanness and strength. In order to meet this high quality level a remarkable quality improvement was obtained within the last years due to the introduction of a very strict ladle metallurgy together with a controlled stirring in ladle and an optimized steel flow pattern in the tundish. The tradition of spring steel and particularly of Si killed SiCr steel grades of the Saarstahl AG increased continuously within the last years and reached nearly 100000 t/a in 2004, at the same time the rejection rate decreased significantly. The application of the soft reduction technique and an advanced equipment on the new billet continuous casting machine SO with a strand size of 150 mm sq. and the introduction of the new walking beam furnace and the precise temperature controlled deformation in the rolling mill will provide further substantial quality improvements. (orig.)

  9. Linear magnetic spring and spring/motor combination

    Science.gov (United States)

    Patt, Paul J. (Inventor); Stolfi, Fred R. (Inventor)

    1991-01-01

    A magnetic spring, or a spring and motor combination, providing a linear spring force characteristic in each direction from a neutral position, in which the spring action may occur for any desired coordinate of a typical orthogonal coordinate system. A set of magnets are disposed, preferably symmetrically about a coordinate axis, poled orthogonally to the desired force direction. A second set of magnets, respectively poled opposite the first set, are arranged on the sprung article. The magnets of one of the sets are spaced a greater distance apart than those of the other, such that an end magnet from each set forms a pair having preferably planar faces parallel to the direction of spring force, the faces being offset so that in a neutral position the outer edge of the closer spaced magnet set is aligned with the inner edge of the greater spaced magnet set. For use as a motor, a coil can be arranged with conductors orthogonal to both the magnet pole directions and the direction of desired spring force, located across from the magnets of one set and fixed with respect to the magnets of the other set. In a cylindrical coordinate system having axial spring force, the magnets are radially poled and motor coils are concentric with the cylinder axis.

  10. A bountiful spring harvest

    CERN Multimedia

    2013-01-01

    Although we recently put the clocks forward and spring has officially begun, the view from my window looks more autumnal – befitting of the season of mists and mellow fruitfulness, rather than that of sowing seeds for the future. Which, in a way is appropriate. With the LHC paused, we are reaping a kind of harvest in the form of recognition for our efforts.   Two weeks ago, I was in Edinburgh, on behalf of everyone at CERN, to collect the Edinburgh medal, which we shared with Peter Higgs. I particularly like the citation for this honour: “The Edinburgh Medal is awarded each year to men and women of science and technology whose professional achievements are judged to have made a significant contribution to the understanding and well-being of humanity.” I like this, because it underlines a fact that needs to be shouted louder – that fundamental science does more than build the sum of human knowledge, it is also the foundation of human well-being. A few d...

  11. Spring comes for ATLAS

    CERN Multimedia

    Butin, F.

    2004-01-01

    (First published in the CERN weekly bulletin 24/2004, 7 June 2004.) A short while ago the ATLAS cavern underwent a spring clean, marking the end of the installation of the detector's support structures and the cavern's general infrastructure. The list of infrastructure to be installed in the ATLAS cavern from September 2003 was long: a thousand tonnes of mechanical structures spread over 13 storeys, two lifts, two 65-tonne overhead travelling cranes 25 metres above cavern floor, with a telescopic boom and cradle to access the remaining 10 metres of the cavern, a ventilation system for the 55 000 cubic metre cavern, a drainage system, a standard sprinkler system and an innovative foam fire-extinguishing system, as well as the external cryogenic system for the superconducting magnets and the liquid argon calorimeters (comprising, amongst other things, two helium refrigeration units, a nitrogen refrigeration unit and 5 km of piping for gaseous or liquid helium and nitrogen), not to mention the handling eq...

  12. The Begg's uprighting spring - Revisited.

    Science.gov (United States)

    Kumar, Vinay; Sundareswaran, Shobha

    2015-01-01

    Uprighting springs, an integral part of the Begg ligsht wire differential force technique is gaining more and more popularity, as a useful adjunct in contemporary preadjusted edgewise appliance systems as well. It can be used with brackets containing vertical slots for mesiodistal crown uprighting, or as braking auxiliaries providing additional anchorage while protracting posteriors. Here, we present a simple and quick chair side method of fabricating and customizing uprighting springs according to the required crown/root movement for correction. This communication would serve as a ready reckoner during fabrication of the springs, thus dispelling the confusion that usually arises regarding direction and position of the coil and active arm.

  13. Groundwater flow cycling between a submarine spring and an inland fresh water spring.

    Science.gov (United States)

    Davis, J Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  14. Laurel Springs & DoDEA

    National Research Council Canada - National Science Library

    Jhung, Seung

    2000-01-01

    At the request of the client organization, Laurel Springs School, we developed an in-depth market analysis of comparable educational programs offered within the Department of Defense Education Activities (DoDEA...

  15. 78 FR 16665 - International Energy Agency Meetings

    Science.gov (United States)

    2013-03-18

    ... this notice is to permit attendance by representatives of U.S. company members of the IAB at a meeting... meeting among company representatives at the same location at 8:30 a.m. on March 26. The agenda for this... Refining Crisis 8. Middle East Energy Exports and the Arab Spring 9. The Turmoil in North Africa and the...

  16. Spring Small Grains Area Estimation

    Science.gov (United States)

    Palmer, W. F.; Mohler, R. J.

    1986-01-01

    SSG3 automatically estimates acreage of spring small grains from Landsat data. Report describes development and testing of a computerized technique for using Landsat multispectral scanner (MSS) data to estimate acreage of spring small grains (wheat, barley, and oats). Application of technique to analysis of four years of data from United States and Canada yielded estimates of accuracy comparable to those obtained through procedures that rely on trained analysis.

  17. Marble Canyon spring sampling investigation

    International Nuclear Information System (INIS)

    McCulley, B.

    1985-10-01

    The Mississippian Leadville Limestone is the most permeable formation in the lower hydrostratigraphic unit underlying the salt beds of the Paradox Formation in Gibson Dome, Paradox Basin, Utah, which is being considered as a potential nuclear waste repository site. The closest downgradient outcrop of the Mississippian limestone is along the Colorado River in Marble Canyon, Arizona. This report describes the sampling and interpretation of springs in that area to assess the relative contribution of Gibson Dome-type Leadville Limestone ground water to that spring discharge. The high-volume (hundreds of liters per second or thousands of gallons per minute) springs discharging from fault zones in Marble Canyon are mixtures of water recharged west of the Colorado River on the Kaibab Plateau and east of the river in the Kaiparowits basin. No component of Gibson Dome-type Leadville Limestone ground water is evident in major and trace element chemistry or isotopic composition of the Marble Canyon Springs. A low-volume (0.3 liters per second or 5 gallons per minute) spring with some chemical and isotopic characteristics of Gibson Dome-type Leadville Limestone water diluted by Kaiparowits basin-type water issues from a travertine mound in the Bright Angel Shale on the Little Colorado River. However, the stable isotopic composition and bromide levels of that spring discharge, in addition to probable ground-water flow paths, contradict the dilution hypothesis

  18. 78 FR 53783 - Notice of Intent To Repatriate Cultural Items: Colorado College, Colorado Springs, CO

    Science.gov (United States)

    2013-08-30

    ... this notice meet the definition of unassociated funerary objects. Lineal descendants or representatives... Springs, CO, that meet the definition of unassociated funerary objects under 25 U.S.C. 3001. This notice... adaption of Huhugam and has become known in the larger society as an archeological culture. Determinations...

  19. E-MRS Spring Meeting - Nanophotonic Materials Session

    Science.gov (United States)

    2004-05-27

    are also analyzed, including combinations of recently realized nanorings [5]. The effective optical properties of various families of metamaterials...present calculations of the distant-dependent dissipated power as a function of wave vector for an oscillating dipole above the silver /dielectric...the measurement of leakage radiation to the excitation and propagation of SPPs in silver films with various surface nanostructures, thereby gaining

  20. Fossilization Processes in Thermal Springs

    Science.gov (United States)

    Farmer, Jack D.; Cady, Sherry; Desmarais, David J.; Chang, Sherwood (Technical Monitor)

    1995-01-01

    To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular

  1. Spring harvest of corn stover

    Energy Technology Data Exchange (ETDEWEB)

    Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

    2010-07-01

    Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

  2. 76 FR 39077 - Notice of Commission Meeting and Public Hearing

    Science.gov (United States)

    2011-07-05

    ... business meeting. The conference session and business meeting both are open to the public and will be held... be held during the 1:30 p.m. business meeting include the dockets listed below. 1. Spring City... Nos. 1, 2, 3, and 5 in the Lockatong Formation and Brunswick Group. The project is located in the East...

  3. Instant Spring for Android starter

    CERN Document Server

    Dahanne, Anthony

    2013-01-01

    Packt Instant Starter: get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.This is a Starter which gives you an introduction to Spring for Android with plenty of well-explained practical code examples.If you are an Android developer who wants to learn about RESTful web services and OAuth authentication and authorization, and you also want to know how to speed up your development involving those architectures using Spring for Android abstractions, then this book is for you.But core Java developers

  4. Spring for It: First Novels

    Science.gov (United States)

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  5. Open-Coil Retraction Spring

    Directory of Open Access Journals (Sweden)

    Pavankumar Janardan Vibhute

    2011-01-01

    Full Text Available Sliding mechanic has become a popular method for space closure with developments in preadjusted edgewise appliance. Furthermore, various space closing auxiliaries have been developed and evaluated extensively for their clinical efficiency. Their effectiveness enhanced with optimum force magnitude and low-load deflection rate (LDR/force decay. With the advent of NiTi springs in orthodontics, LDRs have been markedly reduced. For use of NiTi, clinician has to depend upon prefabricated closed coil springs. “Open Coil Retraction Spring (OCRS” is developed utilizing NiTi open-coil spring for orthodontic space closure. This paper describes fabrication and clinical application of OCRS which have number of advantages. It sustains low LDR with optimum force magnitude. Its design is adjustable for desired length and force level. It is fail-safe for both activation and deactivation (i.e., it cannot be over activated, and decompression limit of open coil is also controlled by the operator, resp.. A possibility to offset the OCRS away from mucosa helps to reduce its soft-tissue impingement.

  6. Finite element fatigue analysis of rectangular clutch spring of automatic slack adjuster

    Science.gov (United States)

    Xu, Chen-jie; Luo, Zai; Hu, Xiao-feng; Jiang, Wen-song

    2015-02-01

    The failure of rectangular clutch spring of automatic slack adjuster directly affects the work of automatic slack adjuster. We establish the structural mechanics model of automatic slack adjuster rectangular clutch spring based on its working principle and mechanical structure. In addition, we upload such structural mechanics model to ANSYS Workbench FEA system to predict the fatigue life of rectangular clutch spring. FEA results show that the fatigue life of rectangular clutch spring is 2.0403×105 cycle under the effect of braking loads. In the meantime, fatigue tests of 20 automatic slack adjusters are carried out on the fatigue test bench to verify the conclusion of the structural mechanics model. The experimental results show that the mean fatigue life of rectangular clutch spring is 1.9101×105, which meets the results based on the finite element analysis using ANSYS Workbench FEA system.

  7. Archaeal Nitrification in Hot Springs

    Science.gov (United States)

    Richter, A.; Daims, H.; Reigstad, L.; Wanek, W.; Wagner, M.; Schleper, C.

    2006-12-01

    Biological nitrification, i.e. the aerobic conversion of ammonia to nitrate via nitrite, is a major component of the global nitrogen cycle. Until recently, it was thought that the ability to aerobically oxidize ammonia was confined to bacteria of the phylum Proteobacteria. However, it has recently been shown that Archaea of the phylum Crenarchaeota are also capable of ammonia oxidation. As many Crenarchaeota are thermophilic or hyperthermophilic, and at least some of them are capable of ammonia oxidation we speculated on the existence of (hyper)thermophilic ammonia-oxidizing archaea (AOA). Using PCR primers specifically targeting the archaeal ammonia monooxygenase (amoA) gene, we were indeed able to confirm the presence of such organisms in several hot springs in Reykjadalur, Iceland. These hot springs exhibited temperatures well above 80 °C and pH values ranging from 2.0 to 4.5. To proof that nitrification actually took place under these extreme conditions, we measured gross nitrification rates by the isotope pool dilution method; we added 15N-labelled nitrate to the mud and followed the dilution of the label by nitrate production from ammonium either in situ (incubation in the hot spring) or under controlled conditions in the laboratory (at 80 °C). The nitrification rates in the hot springs ranged from 0.79 to 2.22 mg nitrate-N per L of mud and day. Controls, in which microorganisms were killed before the incubations, demonstrated that the nitrification was of biological origin. Addition of ammonium increased the gross nitrification rate approximately 3-fold, indicating that the nitrification was ammonium limited under the conditions used. Collectively, our study provides evidence that (1) AOA are present in hot springs and (2) that they are actively nitrifying. These findings have major implications for our understanding of nitrogen cycling of hot environments.

  8. 75 FR 11868 - Defense Health Board (DHB) Meeting

    Science.gov (United States)

    2010-03-12

    ... Colorado Springs Marriott hotel, 5580 Tech Center Drive, Colorado Springs, CO 80919. Written statements may.... Additional information, agenda updates, and meeting registration are available online at the Defense Health... will review all timely submissions with the Department of Defense Task Force on the Prevention of...

  9. Plenary lectures of the divisions semiconductor physics, thin films, dynamics and statistical physics, magnetism, metal physics, surface physics, low temperature physics

    International Nuclear Information System (INIS)

    Roessler, U.

    1992-01-01

    This volume contains a selection of plenary and invited lectures of the Solid State Division spring meeting of the DPG (Deutsche Physikalische Gesellschaft) 1992 in Regensburg. The constribution come mainly from five fields of the physics of condensed matter: doped fullerenes and high Tc superconductors, surfaces, time-resolved on nonlinear optics, polymer melts, and low-dimensional semiconductor systems. (orig.)

  10. COMMISSIONING AND DIRECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    Darin Acosta

    The main event since the last CMS week has been the long cosmic run with the field at the nominal value of 3.8 Tesla (CRAFT). The goals of the run were to operate continuously the detector for the order of a month in order to gain operational experience and to accumulate cosmic track statistics matching that collected from all previous CRUZET runs (i.e. 300 Million cosmic triggers), or expressed in different terms, to run with an average operational efficiency exceeding 70%. Both goals have been achieved: the 70% average live time is given by a mixture of fairly stable running periods (we have run for up to 24 hours without a single interruption) and periods of high instability due to a multitude of causes which are being analyzed. Several firmware issues have been identified and are being fixed. Problems in the control software robustness are being tackled, and for the unavoidable readout hardware failures (in a system as large and complex as our data acquisition setup), modifications in the DAQ are being ...

  11. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    2010-01-01

    The period since the last CMS week has witnessed the start of the LHC as a 'physics' machine. The excitement of the first collisions at 7 TeV on March 30 will be remembered for a long time! The preparation for the event was meticulous. The LHC was pushed to deliver non-colliding stable beams prior to the real collisions, which allowed CMS teams to use the few beam gas interactions within the length of the pixel detector to verify that the beams would indeed collide once both beams were circulating and the separation bump was collapsed. In passing, this exercise allowed us to catch some last minute features of the system, which could have affected our performance on the day! The first collisions were detected practically simultaneously around the ring. Within tens of minutes not only event displays, but also some physics distributions were delivered to the audience of the press conference. A plan of work had been carefully defined on how to use the first collisions following the first hour of excitement. I...

  12. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    L. Malgeri

    2011-01-01

    General Figure 2: Integrated luminosity delivered by LHC and recorded by CMS in 2010 and 2011. Since the last CMS Bulletin, an enormous amount of progress has been made. The LHC has been increasing the number of bunches stored in the machine to the record of 1236 bunches. On the way there they have achieved a peak instantaneous luminosity of 1.27x1033 cm-2s-1 making the LHC by far the highest luminosity hadron collider. The LHC has now delivered over 1 fb-1 to CMS. Figure 2 shows the delivered and recorded luminosity in the 2010 and 2011 run. In Figure 3 is shown the daily delivered and recorded luminosity during the 2011 run until mid-June. The LHC has now delivered over 50 pb-1 in one day.   Figure 3: The daily delivered and recorded luminosities during the 2011 run. Tracker The data collected by the Tracker is of very good quality, and is being constantly monitored offline by our Offline shift crew and our DQM team. These teams are also certifying the data, and it is seen that 99% of the da...

  13. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    L. Malgeri

    2011-01-01

    Since the last Bulletin, CMS has completed the proton data-taking and transitioned to the ion physics data-taking. The proton run in 2011 has been a great success both for the LHC and CMS. The data delivered by the LHC and recorded by CMS are shown in Figure 3. In the period up to the June/July machine development (MD) and technical stop (TS) the machine completed the ramping to 1380 bunches per beam. In the July and August running period the machine reduced the emittance and increased the bunch charges. In the last proton running period after the August/September MD and TS period the machine reduced b* to 1.0 m from 1.5 m that had been used earlier in the year. This, combined with some further increases in the intensity, lead to the peak instantaneous luminosity of 3.5 x 1033 cm–2s–1 achieved this year. The LHC delivered 5.72 fb–1 and CMS recorded 5.20 fb–1 for an overall efficiency of 91%. The offline certification yielded a 'golden' sample of 4.7 fb...

  14. Super-preshowers (DPG-Fruehjahrstagung 2016)

    Energy Technology Data Exchange (ETDEWEB)

    Kaeaepae, Alex [Bergische Universitaet Wuppertal, Gaussstr. 20, 42119 Wuppertal (Germany); Collaboration: Pierre-Auger-Collaboration

    2016-07-01

    Based on the current data from the Pierre Auger Observatory, no evidence of cosmic ray photon primaries has been found. However, photon primaries could induce so-called ''super-preshowers'', which have not been considered sofar, but are a promising candidate for explaining the ''composition puzzle'' at ultra-high energies. In this presentation, possible super-preshower processes are examined, and their effects on important Auger parameters, such as the energy deposit and muon production, are studied via simulations.

  15. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    L. Malgeri

    2010-01-01

    The last six months have been very intense for run coordination as this period corresponds to the time most of the LHC luminosity has been delivered. The pace imposed by the LHC has marked the operation of the CMS detector and data logging: the luminosity has on average doubled every 10 days. Sometimes, this has strained our activities: the trigger teams, both Level-1 and HLT, have been in the trenches to cope with the spectacular LHC performance in order to keep the thresholds as low as possible for e/γs and jet triggers in order to make the physics community profit as much as possible from the data delivered. The constant effort to stay at the edge of our possibilities (essentially stay at or below 70 kHz for the first level trigger rates and below 600 Hz logging rates) has paid off in the end. Examples are the beautiful di-muon and di-electron invariant mass distributions where we are able, for instance, to detect low mass resonance like the h in the di-muon decay channel which has branching rat...

  16. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    A. Ryd and T. Camporesi

    2010-01-01

    Commissioning and Run Coordination activities After the successful conclusion of the LHC pilot run commissioning in 2009 activities at the experiment restarted only late in January due to the cooling and detector maintenance. As usual we got going with weekly exercises used to deploy, debug, and validate improvements in firmware and software. A debriefing workshop aimed at analyzing the operational aspects of the 2009 pilot run was held on Jan. 15, 2009, to define a list of improvements (and relative priorities) to be planned. In the last month, most of the objectives set in the debriefing workshop have been attained. The major achievements/improvements obtained are the following: - Consolidation of the firmware for both readout and trigger for ECAL - Software implementation of procedures for raising the bias voltage of the silicon tracker and pixel driven by LHC mode changes with automatic propagation of the state changes from the DCS to the DAQ. The improvements in the software and firmware allow suppress...

  17. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    L. Malgeri

    2011-01-01

    As the technical interventions were finishing up and services restored at P5 we started central operations again in 2011. We started operations with a reduced shift crew, Shift leader and DCS shifter, on 24th January. We had a first mid-week global run on 2nd and 3rd February followed by cosmic data-taking between 10th and 20th February. Due to delays with cooling for the strip tracker the useful cosmic data-taking with the strip tracker was reduced to about four days. On 20th February, the LHC started beam commissioning, and cosmic data-taking with the full CMS detector was stopped. The machine availability has been much higher during the 2011 beam commissioning than during the comparable time period in 2010. This has given us few opportunities to turn on the tracker for further cosmic data-taking. Many changes and upgrades were performed during the winter shutdown. Among them was an upgrade to running the central DAQ on 64 bit. All of these upgrades have now b...

  18. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    Darin Acosta

    Since the last CMS week we have continued the regular mid week global runs and conducted the first CRUZET this year at the beginning of June. The fact that the tracker was not available yet due to the cooling plant refurbishing has limited the scope of these global runs. The focus has been on verifying the robustness of the various subsystem data acquisition chains under realistic LHC-like trigger conditions. In the last few weeks we have been able to take runs of many hours at a Level-1 trigger rate of 90 kHz with less than 10% deadtime. As usual a lot of issues have been found and dealt with, and the firmware of the various subsystems have all been upgraded/fixed. Worth reporting is the fact that now both endcaps are read-out completely (including the RPC on the negative side) and the local commissioning of the preshower detector has been steadily progressing, with the last firmware fixes in hand to be able to join the global run campaign. The Pixel system has been part of 3 global runs already and has pr...

  19. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    Darin Acosta

    The pace of activity is high for the Detector Performance Groups now that the CMS experiment is complete for 2008 and LHC beams are imminent. This includes refinement of the data quality monitoring tools (including prompt offline analyses), triggers, reconstruction code, and calibration and alignment conditions. Notable since the last CMS Week has been the inclusion of the strip tracker into the global running in July and the inclusion of the pixel systems and ECAL endcaps in August. The following describes the highlights from each group. During the CRUZET3 global run in July (the third installment of the Cosmic Run at Zero Tesla exercise) the Silicon Strip tracker recorded data with all barrel detectors and one side of the end-cap wheels. The week-long data-taking period delivered about 300k tracks good for detector alignment and was an extremely valuable experience to test the reconstruction, calibration and alignment workflows in their final configuration. Events with tracks were selected in real-time at ...

  20. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    D. Acosta

    Point 5 commissioning activities Since the last CMS week there has been little global commissioning activities: the first mid week global run aiming to assess the status of the hardware and DAQ software after the winter maintenance and developments has taken place two weeks ago involving all subdetectors but tracker and pixel whose hardware is still being actively worked on. The local commissioning restarted once the cooling became available again the third week of January. Below are detailed the main activities which have taken place so far. DAQ The activity of the central DAQ group during pause of global runs was focused on various items. The commissioning of the 900 new PCs which will be used to run the HLT processes has been almost completed. It is planned to use these PCs in the first global run at the start of March. In addition the location of various server PCs which host essential functionalities to get the private ".cms" network going, has been re-organized to allow to implemen...

  1. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    Tiziano Camporesi

    Pit commissioning activities The last 4 months have seen various major achievements in hardware commissioning, global data taking, readiness of the DPGs to deal with LHC data flows and alignment and calibration workflows. Since February, the global commissioning has been characterized on the one side by more and more of the final CMS detector becoming available for global readout and triggering and on the other side by consolidation of many of the central software infrastructure and of most of the services infrastructure. The reliability of services like cooling, power, gas has markedly improved with respect to what we observed in the second half of 2007.   Of particular note are the delivery of all low voltage power supplies, the commissioning of the final power distribution, the progressive commissioning ( still ongoing)  of the Detector Safety System and of the associated DCS early warning and alarm system. On the detector side, while already we are used to seeing all of HCAL being exe...

  2. Recent trend of administration on hot springs

    Energy Technology Data Exchange (ETDEWEB)

    Okubo, Shigeru [Environment Agency, Tokyo (Japan)

    1989-01-01

    The Environmental Agency exercises jurisdiction over Hot Spring Act, and plans to protect the source of the hot spring and to utilize it appropriately. From the aspect of utilization, hot springs are widely used as a means to remedy chronic diseases and tourist spots besides places for recuperation and repose. Statistics on Japanese hot springs showed that the number of hot spring spots and utilized-fountainhead increased in 1987, compared with the number in 1986. Considering the utilized-headspring, the number of naturally well-out springs has stabilized for 10 years while power-operated springs have increased. This is because the demand of hot springs has grown as the number of users has increased. Another reason is to keep the amount of hot water by setting up the power facility as the welled-out amount has decreased. Major point of recent administration on the hot spring is to permit excavation and utilization of hot springs. Designation of National hot spring health resorts started in 1954 in order to ensure the effective and original use of hot springs and to promote the public use of them, for the purpose of arranging the sound circumstances of hot springs. By 1988, 76 places were designated. 4 figs., 3 tabs.

  3. Portrait of a Geothermal Spring, Hunter's Hot Springs, Oregon.

    Science.gov (United States)

    Castenholz, Richard W

    2015-01-27

    Although alkaline Hunter's Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73-74 °C (the world-wide upper limit for photosynthesis), and 68-70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria) is at 54-55 °C, and the in situ lower limit at 47-48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47-48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments.

  4. Baseline risk evaluation for exposure to bulk wastes at the Weldon Spring Quarry, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    Haroun, L.A.; Peterson, J.M.; MacDonell, M.M.; Hlohowskyj, I.

    1990-01-01

    The US Department of Energy (DOE), under its Surplus Facilities Management Program (SFMP), is responsible for cleanup activities at the Weldon Spring site, Weldon Spring, Missouri. The site consists of a raffinate pits and chemical plant area and a quarry. This baseline risk evaluation has been prepared to support a proposed response action for management of contaminated bulk wastes in the quarry. The quarry became chemically and radioactively contaminated as a result of various wastes that were disposed of there between 1942 and 1969. This risk evaluation assesses potential impacts on human health and the environment that may result from exposure to releases of contaminants from the quarry under current site conditions. Risk assessment is a key component of the remedial investigation/feasibility study (RI/FS) process, as identified in guidance from the US Environmental Protection Agency (EPA); this process addresses sites subject to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended by the Superfund Amendments and Reauthorization Act of 1986. Response actions at the Weldon Spring quarry are subject to CERCLA requirements because the quarry is listed on the EPA's National Priorities List. The DOE is also responsible for complying with the requirements of the National Environmental Policy Act (NEPA) of 1969, which requires federal agencies to consider the environmental consequences of a proposed action as part of the decision-making process for that action. Although this document has not been prepared to fulfill specific NEPA requirements, the analyses contained herein --- along with the analyses provided in the remedial investigation, feasibility study, and other supporting documents --- are intended to meet the environmental assessment requirements of NEPA

  5. Proceedings of the Korean Society for Nondestructive Testing Fall Meeting 1998

    International Nuclear Information System (INIS)

    1998-05-01

    This proceedings contains articles of the Korean Society for Nondestructive Testing Spring Meeting, 1998. It was held on May.8-9, 1998 Yeungnam University in Daegu, Korea and subject of the Korean Society for Nondestructive Testing Spring Meeting 1998. This proceedings is comprised of 4 sessions.

  6. Spring Framework 5: Themes & Trends

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Spring Framework 5.0/5.1, scheduled for release in early/late 2017, focuses on several key themes: reactive web applications based on Reactive Streams, comprehensive support for JDK 9 and HTTP/2, as well as the latest API generations in the Enterprise Java ecosystem. This talk presents the overall story in the context of wider industry trends, highlighting Spring’s unique programming model strategy.

  7. Injector linac of SPring-8

    International Nuclear Information System (INIS)

    Yoshikawa, H.; Hori, T.; Suzuki, S.; Yanagida, K.; Itoh, Y.; Mizuno, A.; Taniuchi, T.; Sakaki, H.; Kuba, A.; Fukushima, S.; Kobayashi, T.; Asaka, T.; Yokomizo, H.

    1996-01-01

    The linac that is SPring-8 injector was completed and started operation from August 1. A beam was able to be transported to the final beam dumping at a tail end on August 8. From now on this linac carries out beam adjustment and be scheduled to do a beam injection to a synchrotron in October. The construction and fundamental performance of the linac are described. (author)

  8. Controlling proteins through molecular springs.

    Science.gov (United States)

    Zocchi, Giovanni

    2009-01-01

    We argue that the mechanical control of proteins-the notion of controlling chemical reactions and processes by mechanics-is conceptually interesting. We give a brief review of the main accomplishments so far, leading to our present approach of using DNA molecular springs to exert controlled stresses on proteins. Our focus is on the physical principles that underlie both artificial mechanochemical devices and natural mechanisms of allostery.

  9. Mechanics of anisotropic spring networks.

    Science.gov (United States)

    Zhang, T; Schwarz, J M; Das, Moumita

    2014-12-01

    We construct and analyze a model for a disordered linear spring network with anisotropy. The modeling is motivated by, for example, granular systems, nematic elastomers, and ultimately cytoskeletal networks exhibiting some underlying anisotropy. The model consists of a triangular lattice with two different bond occupation probabilities, p(x) and p(y), for the linear springs. We develop an effective medium theory (EMT) to describe the network elasticity as a function of p(x) and p(y). We find that the onset of rigidity in the EMT agrees with Maxwell constraint counting. We also find beyond linear behavior in the shear and bulk modulus as a function of occupation probability in the rigid phase for small strains, which differs from the isotropic case. We compare our EMT with numerical simulations to find rather good agreement. Finally, we discuss the implications of extending the reach of effective medium theory as well as draw connections with prior work on both anisotropic and isotropic spring networks.

  10. 75 FR 39241 - Hooper Springs Project

    Science.gov (United States)

    2010-07-08

    ... DEPARTMENT OF ENERGY Bonneville Power Administration Hooper Springs Project AGENCY: Bonneville... (collectively referred to as the Hooper Springs Project). The new BPA substation would be called Hooper Springs... proposed project would address voltage stability and reliability concerns of two of BPA's full requirements...

  11. A Low Frequency FBG Accelerometer with Symmetrical Bended Spring Plates

    Directory of Open Access Journals (Sweden)

    Fufei Liu

    2017-01-01

    Full Text Available To meet the requirements for low-frequency vibration monitoring, a new type of FBG (fiber Bragg grating accelerometer with a bended spring plate is proposed. Two symmetrical bended spring plates are used as elastic elements, which drive the FBG to produce axial strains equal in magnitude but opposite in direction when exciting vibrations exist, leading to doubling the wavelength shift of the FBG. The mechanics model and a numerical method are presented in this paper, with which the influence of the structural parameters on the sensitivity and the eigenfrequency are discussed. The test results show that the sensitivity of the accelerometer is more than 1000 pm/g when the frequency is within the 0.7–20 Hz range.

  12. Spring Recipes A Problem-solution Approach

    CERN Document Server

    Long, Josh; Mak, Gary

    2010-01-01

    With over 3 Million users/developers, Spring Framework is the leading "out of the box" Java framework. Spring addresses and offers simple solutions for most aspects of your Java/Java EE application development, and guides you to use industry best practices to design and implement your applications. The release of Spring Framework 3 has ushered in many improvements and new features. Spring Recipes: A Problem-Solution Approach, Second Edition continues upon the bestselling success of the previous edition but focuses on the latest Spring 3 features for building enterprise Java applications.

  13. Isolators Including Main Spring Linear Guide Systems

    Science.gov (United States)

    Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

    2017-01-01

    Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

  14. Meeting Disorders.

    Science.gov (United States)

    Yager, Joel; Katzman, Jeffrey W

    2017-12-01

    Although meetings are central to organizational work, considerable time devoted to meetings in Academic Health Centers appears to be unproductively spent. The primary purposes of this article are to delineate and describe Meeting Disorders, pathological processes resulting in these inefficient and ineffective scenarios, and Meeting Fatigue Disorder (MFD), a clinical syndrome. The paper also offers preliminary approaches to remedies. The authors integrate observations made during tens of thousands of hours in administrative meetings in academic medical settings with information in the literature regarding the nature, causes and potential interventions for dysfunctional groups and meetings. Meeting Disorders, resulting from distinct pathologies of leadership and organization, constitute prevalent subgroups of the bureaucrapathologies, pathological conditions caused by dysfunctional bureaucratic processes that generate excesses of wasted time, effort, and other resources. These disorders also generate frustration and demoralization among participants, contributing to professional burnout. Meeting Fatigue Disorder (MFD) is a subjective condition that develops in individuals who overdose on these experiences and may reflect one manifestation of burnout. Meeting disorders and Meeting Fatigue Disorder occur commonly in bureaucratic life. Resources and potential remedies are available to help ameliorate their more deleterious effects.

  15. Conference scene: DGVS spring conference 2009.

    Science.gov (United States)

    Kolligs, Frank Thomas

    2009-10-01

    The 3rd annual DGVS Spring Conference of the German Society for Gastroenterology (Deutsche Gesellschaft für Verdauungs- und Stoffwechselkrankheiten) was held at the Seminaris Campus Hotel in Berlin, Germany, on 8-9 May, 2009. The conference was organized by Roland Schmid and Matthias Ebert from the Technical University of Munich, Germany. The central theme of the meeting was 'translational gastrointestinal oncology: towards personalized medicine and individualized therapy'. The conference covered talks on markers for diagnosis, screening and surveillance of colorectal cancer, targets for molecular therapy, response prediction in clinical oncology, development and integration of molecular imaging in gastrointestinal oncology and translational research in clinical trial design. Owing to the broad array of topics and limitations of space, this article will focus on biomarkers, response prediction and the integration of biomarkers into clinical trials. Presentations mentioned in this summary were given by Matthias Ebert (Technical University of Munich, Germany), Esmeralda Heiden (Epigenomics, Berlin, Germany), Frank Kolligs (University of Munich, Germany), Florian Lordick (University of Heidelberg, Germany), Hans Jorgen Nielsen (University of Copenhagen, Denmark), Anke Reinacher-Schick (University of Bochum, Germany), Christoph Röcken (University of Berlin, Germany), Wolff Schmiegel (University of Bochum, Germany) and Thomas Seufferlein (University of Halle, Germany).

  16. Comparative spring mechanics in mantis shrimp.

    Science.gov (United States)

    Patek, S N; Rosario, M V; Taylor, J R A

    2013-04-01

    Elastic mechanisms are fundamental to fast and efficient movements. Mantis shrimp power their fast raptorial appendages using a conserved network of exoskeletal springs, linkages and latches. Their appendages are fantastically diverse, ranging from spears to hammers. We measured the spring mechanics of 12 mantis shrimp species from five different families exhibiting hammer-shaped, spear-shaped and undifferentiated appendages. Across species, spring force and work increase with size of the appendage and spring constant is not correlated with size. Species that hammer their prey exhibit significantly greater spring resilience compared with species that impale evasive prey ('spearers'); mixed statistical results show that species that hammer prey also produce greater work relative to size during spring loading compared with spearers. Disabling part of the spring mechanism, the 'saddle', significantly decreases spring force and work in three smasher species; cross-species analyses show a greater effect of cutting the saddle on the spring force and spring constant in species without hammers compared with species with hammers. Overall, the study shows a more potent spring mechanism in the faster and more powerful hammering species compared with spearing species while also highlighting the challenges of reconciling within-species and cross-species mechanical analyses when different processes may be acting at these two different levels of analysis. The observed mechanical variation in spring mechanics provides insights into the evolutionary history, morphological components and mechanical behavior, which were not discernible in prior single-species studies. The results also suggest that, even with a conserved spring mechanism, spring behavior, potency and component structures can be varied within a clade with implications for the behavioral functions of power-amplified devices.

  17. CACTUS SPRING ROADLESS AREA, CALIFORNIA.

    Science.gov (United States)

    Matti, Jonathan C.; Kuizon, Lucia

    1984-01-01

    Geologic, geochemical, and geophysical studies together with a review of historic mining and prospecting activities indicate that the Cactus Spring Roadless Area in California has little promise for the occurrence of mineral or energy resources. Marble bodies occur in the northern part of the roadless area and are possible resources for building stone, crushed and quarried aggregate, and lime and magnesium for Portland cement and industrial applications. It is recommended that the terrane of marble be mapped and sampled carefully in order to evaluate the quantity and quality of the carbonate resources.

  18. STAFF MEETING

    CERN Document Server

    2003-01-01

    I should like to invite all members of the CERN Personnel to a meeting on Wednesday 25th June 2003 at 11.00 hrs - Auditorium, bldg. 500 to give a report on the outcome of the June Meetings of Council and its Committees. Closed-circuit transmission of the meeting will be available in the AB Auditorium (Prévessin), the AB Auditorium (Meyrin - bldg. 6), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). Luciano Maiani Director General

  19. Outer grid strap protruding spring repair apparatus

    International Nuclear Information System (INIS)

    Widener, W.H.

    1987-01-01

    This patent describes a nuclear fuel assembly grid spring repair apparatus for repairing a spring formed on an outer strap of a fuel assembly grid and having a portion protruding outwardly beyond the strap, the apparatus comprising: (a) a support frame defining an opening and having means defining a guide channel extending along the opening in a first direction; (b) means mounted on the frame and being adjustable for attaching the frame to the outer strap of the support grid so that the frame opening is aligned with the outwardly protruding spring on the outer strap; (c) an outer slide having a passageway defined therethrough and being mounted in the guide channel for reciprocable movement along the frame opening in the first direction for aligning the passageway with the outwardly protruding portion of the spring on the outer strap. The outer slide also has means defining a guide way extending along the passageway in a second direction generally orthogonal to the first direction; (d) a spring reset mechanism being operable for resetting the protruding spring to a nonprotruding position relative to the outer strap when the mechanism is aligned with the protruding portion of the spring; and (e) an inner slide supporting the spring reset mechanism and being mounted to the guide way for reciprocable movement along the passageway of the outer slide in the second direction for aligning the spring reset mechanism with the protruding portion of the spring on the outer strap

  20. Low-level waste forum meeting reports

    International Nuclear Information System (INIS)

    1992-01-01

    This paper provides highlights from the spring meeting of the Low Level Radioactive Waste Forum. Topics of discussion included: state and compact reports; New York's challenge to the constitutionality of the Low-Level Radioactive Waste Amendments Act of 1985; DOE technical assistance for 1993; interregional import/export agreements; Department of Transportation requirements; superfund liability; nonfuel bearing components; NRC residual radioactivity criteria

  1. Low-level Waste Forum meeting report. Spring meeting, April 28--30, 1993

    International Nuclear Information System (INIS)

    1993-01-01

    The Low-Level Radioactive Waste Forum is an association of representatives of states and compacts established to facilitate state and compact commission implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies. The Forum participants include representatives from regional compacts, designated host states, unaffiliated states, and states with currently-operating low-level radioactive waste facilities. This report contains information synthesizing the accomplishments of the Forum, as well as any new advances that have been made in the management of low-level radioactive wastes

  2. Reactor upgrade loans in spring?

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The European Bank for Reconstruction and Development (EBRD) could start to make loans for immediate safety improvements on eastern European reactors in the first half of 1993, according to Francois Demarcq, the bank's project manager for the nuclear safety account. He reported to the German Atomforum meeting in Bonn on January 26; progress at last seems to be forthcoming on the proposals for urgent assistance put forward last year by the Group of 24 Organization for Economic Cooperation and Development countries in Lisbon last June and the Group of 7 summit meeting in Bonn in July

  3. R&W Club Frederick Readies for Spring and Beyond | Poster

    Science.gov (United States)

    By Carolynne Keenan, Guest Writer What do discounted Frederick Keys tickets, a wine tour of Frederick area vineyards, a Segway tour of Washington, DC, a summertime National Parks tour, and a special children’s Easter party have in common? All are activities that the Recreation & Welfare (R&W) Club Frederick is currently developing for spring 2013. At the first members meeting

  4. Logic Meeting

    CERN Document Server

    Tugué, Tosiyuki; Slaman, Theodore

    1989-01-01

    These proceedings include the papers presented at the logic meeting held at the Research Institute for Mathematical Sciences, Kyoto University, in the summer of 1987. The meeting mainly covered the current research in various areas of mathematical logic and its applications in Japan. Several lectures were also presented by logicians from other countries, who visited Japan in the summer of 1987.

  5. 78 FR 9691 - Farm Credit Administration Board; Sunshine Act Meeting

    Science.gov (United States)

    2013-02-11

    ... the meeting are: Open Session Approval of Minutes January 10, 2013. New Business Spring 2013 Abstract... February 14, 2013, from 9:00 a.m. until such time as the Board concludes its business. FOR FURTHER...-5090. SUPPLEMENTARY INFORMATION: Parts of this meeting of the Board will be open to the public (limited...

  6. Magnetic spring based on two permanent magnets

    International Nuclear Information System (INIS)

    Tsivilitsin, V.Yu.; Mil'man, Yu.V.; Goncharuk, V.A.; Bondar, I.B.

    2011-01-01

    A new type of the magnetic spring construction 'two permanent magnets' has been considered. A mathematical expression for the estimation of a pulling-in force has been offered. This expression is verified experimentally on the produced operating magnetic spring. The theoretical and experimental data are in good accordance. A number of advantages of the magnetic spring over the construction 'permanent magnet - magnetic circuit' such as an insignificant friction force between two magnets and a higher pulling force are discussed.

  7. Trial lectures for accelerator operators in SPring-8

    International Nuclear Information System (INIS)

    Ohshima, T.

    2004-01-01

    In case of the SPring-8, accelerator operators are working in three shifts of eight hours. They are making the scheduled beam injection to the storage ring, routine measurements of beam parameters such as the COD, the betatron tunes, the bunch current of stored beam and so on. They are keeping watch on operational state every time. In case of something wrong, they will take measures to meet the situation. Newcomer of operator works with an experienced one to learn sequence of the beam injection, how to operate Graphical User Interface and (GUI) so on. In addition, we organise preliminary lectures on accelerator for operators. Topics done in the lectures are RF system, vacuum system, magnet system, monitors, beam diagnostics, accelerator and beamline control system etc. The contents of the lecture can be seen through web browser again and again. It is useful for operators to understand the SPring-8 facility and details of their work because some of them are not familiar with the accelerator field before being an operator of SPring-8. (author)

  8. Soft tissue modelling with conical springs.

    Science.gov (United States)

    Omar, Nadzeri; Zhong, Yongmin; Jazar, Reza N; Subic, Aleksandar; Smith, Julian; Shirinzadeh, Bijan

    2015-01-01

    This paper presents a new method for real-time modelling soft tissue deformation. It improves the traditional mass-spring model with conical springs to deal with nonlinear mechanical behaviours of soft tissues. A conical spring model is developed to predict soft tissue deformation with reference to deformation patterns. The model parameters are formulated according to tissue deformation patterns and the nonlinear behaviours of soft tissues are modelled with the stiffness variation of conical spring. Experimental results show that the proposed method can describe different tissue deformation patterns using one single equation and also exhibit the typical mechanical behaviours of soft tissues.

  9. Work Term Assignment Spring 2017

    Science.gov (United States)

    Sico, Mallory

    2017-01-01

    My tour in the Engineering Robotics directorate exceeded my expectations. I learned lessons about Creo, manufacturing and assembly, collaboration, and troubleshooting. During my first tour, last spring, I used Creo on a smaller project, but had limited experience with it before starting in the Dynamic Systems Test branch this spring. I gained valuable experience learning assembly design, sheet metal design and designing with intent for manufacturing and assembly. These skills came from working both on the hatch and the floor. I also learned to understand the intent of other designers on models I worked with. While redesigning the floor, I was modifying an existing part and worked to understand what the previous designer had done to make it fit with the new model. Through working with the machine shop and in the mock-up, I learned much more about manufacturing and assembly. I used a Dremel, rivet gun, belt sander, and countersink for the first time. Through taking multiple safety training for different machine shops, I learned new machine shop safety skills specific to each one. This semester also gave me new collaborative opportunities. I collaborated with engineers within my branch as well as with Human Factors and the building 10 machine shop. This experience helped me learn how to design for functionality and assembly, not only for what would be easiest in my designs. In addition to these experiences, I learned many lessons in troubleshooting. I was the first person in my office to use a Windows 10 computer. This caused unexpected issues with NASA services and programs, such as the Digital Data Management Server (DDMS). Because of this, I gained experience finding solutions to lockout and freeze issues as well as Creo specific settings. These will be useful skills to have in the future and will be implemented in future rotations. This co-op tour has motivated me more to finish my degree and pursue my academic goals. I intend to take a machining Career Gateway

  10. Post irradiation examination of garter springs from Indian PHWRs

    International Nuclear Information System (INIS)

    Dubey, J.S.; Shah, Priti Kotak; Mishra, Prerna; Singh, H.N.; Alur, V.D.; Kumar, Ashwini; Bhandekar, A.; Pandit, K.M.; Anantharaman, S.

    2013-12-01

    Irradiated Zr-2.5Nb-0.5Cu garter springs, belonging to Indian Pressurised Heavy Water Reactors, which had experienced 8 to 10 Effective Full Power Years of operation were subjected to visual, dimensional, chemical, metallographic examination and relevant mechanical tests. Methodology of the tests conducted and results are presented. The digital photographs were used to measure the inner and outer circumferences by image processing. The hydrogen (H) content in the spring coils were measured using Differential Scanning Calorimetry (DSC). In the stretch test, all the irradiated GSs were found to require an additional load, as compared to unirradiated GS, to produce a given amount of residual extension which indicated that the irradiated GSs had undergone significant irradiation hardening. The crush test results showed that the minimum load required to crush the coil or cause a sudden sideways shift in the grips was higher than 400 N/coil, much higher than the design load. The test results indicated that the irradiated GS, after 10 EFPY of operation, have adequate strength and ductility to continue to meet the design intent. Mechanical tests were carried out on irradiated girdle wires taken out of the loose fit garter springs (GS) from (NAPS-1, ∼ 8.5 EFPY) and tight fit garter spring from KAPS-2 (∼ 8.0 EFPY) PHWRs. Tensile tests on the irradiated girdle wires, showed irradiation hardening in the material and reduction in ductility. The irradiated girdle wires have around 4 to 5% residual ductility level against the 15% ductility of unirradiated wire. The fracture surfaces of the irradiated as well as the un-irradiated girdle wires were observed in SEM. (author)

  11. Shape memory alloy resetable spring lift for pedestrian protection

    Science.gov (United States)

    Barnes, Brian M.; Brei, Diann E.; Luntz, Jonathan E.; Strom, Kenneth; Browne, Alan L.; Johnson, Nancy

    2008-03-01

    Pedestrian protection has become an increasingly important aspect of automotive safety with new regulations taking effect around the world. Because it is increasingly difficult to meet these new regulations with traditional passive approaches, active lifts are being explored that increase the "crush zone" between the hood and rigid under-hood components as a means of mitigating the consequences of an impact with a non-occupant. Active lifts, however, are technically challenging because of the simultaneously high forces, stroke and quick timing resulting in most of the current devices being single use. This paper introduces the SMArt (Shape Memory Alloy ReseTable) Spring Lift, an automatically resetable and fully reusable device, which couples conventional standard compression springs to store the energy required for a hood lift, with Shape Memory Alloys actuators to achieve both an ultra high speed release of the spring and automatic reset of the system for multiple uses. Each of the four SMArt Device subsystems, lift, release, lower and reset/dissipate, are individually described. Two identical complete prototypes were fabricated and mounted at the rear corners of the hood, incorporated within a full-scale vehicle testbed at the SMARTT (Smart Material Advanced Research and Technology Transfer) lab at University of Michigan. Full operational cycle testing of a stationary vehicle in a laboratory setting confirms the ultrafast latch release, controlled lift profile, gravity lower to reposition the hood, and spring recompression via the ratchet engine successfully rearming the device for repeat cycles. While this is only a laboratory demonstration and extensive testing and development would be required for transition to a fielded product, this study does indicate that the SMArt Lift has promise as an alternative approach to pedestrian protection.

  12. August Meeting

    African Journals Online (AJOL)

    chifaou.amzat

    2011-10-19

    Oct 19, 2011 ... rural hometowns, where they unite with their rural-based colleagues for ... extent have they empowered the women-folk in the public sphere? ...... It would be safe, therefore, for one to conceptualise the 'August Meeting'.

  13. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

    You were hundreds of persons to participate in our information meetings of October 3 and 6 2014, and we thank you for your participation! The full presentation is available here. A summary of the topics is available here (in french).

  14. Public meetings

    CERN Multimedia

    Staff Association

    2017-01-01

    Do you have questions about the elections to the Staff Council, 2017 MERIT exercise, EVE and School, LD to IC exercise, CHIS, the Pension Fund… Come get informed and ask your questions at our public meetings. These public meetings are also an opportunity to get the more information on current issues. Benefit from this occasion to get the latest news and to discuss with the representatives of the statutory body that is the Staff Association!

  15. Rooster Springs Elementary Teams Up for Success

    Science.gov (United States)

    Edwards, Jennifer

    2012-01-01

    For many schools, membership in PTA can become "expected," instead of being a positive, fun opportunity to involve parents and support students and teachers. With more than 800 students each year, Rooster Springs Elementary PTA (RSE PTA) in Dripping Springs, Texas, never worried about membership recruitment. The PTA often assumed that…

  16. 1988 Hanford riverbank springs characterization report

    International Nuclear Information System (INIS)

    Dirkes, R.L.

    1990-12-01

    This reports presents the results of a special study undertaken to characterize the riverbank springs (i.e., ground-water seepage) entering the Columbia River along the Hanford Site. Radiological and nonradiological analyses were performed. River water samples were also analyzed from upstream and downstream of the Site as well as from the immediate vicinity of the springs. In addition, irrigation return water and spring water entering the river along the shoreline opposite Hanford were analyzed. Hanford-origin contaminants were detected in spring water entering the Columbia River along the Hanford Site. The type and concentrations of contaminants in the spring water were similar to those known to exist in the ground water near the river. The location and extent of the contaminated discharges compared favorably with recent ground-water reports and predictions. Spring discharge volumes remain very small relative to the flow of the Columbia. Downstream river sampling demonstrates the impact of ground-water discharges to be minimal, and negligible in most cases. Radionuclide concentrations were below US Department of Energy Derived Concentration Guides (DCGs) with the exception 90 Sr near the 100-N Area. Tritium, while below the DCG, was detected at concentrations above the US Environmental Protection Agency drinking water standards in several springs. All other radionuclide concentrations were below drinking water standards. Nonradiological contaminants were generally undetectable in the spring water. River water contaminant concentrations, outside of the immediate discharge zones, were below drinking water standards in all cases. 19 refs., 5 figs., 12 tabs

  17. A natural tracer investigation of the hydrological regime of Spring Creek Springs, the largest submarine spring system in Florida

    Science.gov (United States)

    Dimova, Natasha T.; Burnett, William C.; Speer, Kevin

    2011-04-01

    This work presents results from a nearly two-year monitoring of the hydrologic dynamics of the largest submarine spring system in Florida, Spring Creek Springs. During the summer of 2007 this spring system was observed to have significantly reduced flow due to persistent drought conditions. Our examination of the springs revealed that the salinity of the springs' waters had increased significantly, from 4 in 2004 to 33 in July 2007 with anomalous high radon ( 222Rn, t1/2=3.8 days) in surface water concentrations indicating substantial saltwater intrusion into the local aquifer. During our investigation from August 2007 to May 2009 we deployed on an almost monthly basis a continuous radon-in-water measurement system and monitored the salinity fluctuations in the discharge area. To evaluate the springs' freshwater flux we developed three different models: two of them are based on water velocity measurements and either salinity or 222Rn in the associated surface waters as groundwater tracers. The third approach used only salinity changes within the spring area. The three models showed good agreement and the results confirmed that the hydrologic regime of the system is strongly correlated to local precipitation and water table fluctuations with higher discharges after major rain events and very low, even reverse flow during prolong droughts. High flow spring conditions were observed twice during our study, in the early spring and mid-late summer of 2008. However the freshwater spring flux during our observation period never reached that reported from a 1970s value of 4.9×10 6 m 3/day. The maximum spring flow was estimated at about 3.0×10 6 m 3/day after heavy precipitation in February-March 2008. As a result of this storm (total of 173 mm) the salinity in the spring area dropped from about 27 to 2 in only two days. The radon-in-water concentrations dramatically increased in parallel, from about 330 Bq/m 3 to about 6600 Bq/m 3. Such a rapid response suggests a direct

  18. Meeting Mid-Year Meeting

    Indian Academy of Sciences (India)

    23 Newsletter of the Indian Academy of ScienCE. 57th Annual. Meeting ... Srinivas, Institute for Social and Economic. Change ... "Quantum mechanics and statistical mechanics of anyons" .... Special Issue on Geomagnetic Methods and.

  19. Weldon Spring historical dose estimate

    International Nuclear Information System (INIS)

    Meshkov, N.; Benioff, P.; Wang, J.; Yuan, Y.

    1986-07-01

    This study was conducted to determine the estimated radiation doses that individuals in five nearby population groups and the general population in the surrounding area may have received as a consequence of activities at a uranium processing plant in Weldon Spring, Missouri. The study is retrospective and encompasses plant operations (1957-1966), cleanup (1967-1969), and maintenance (1969-1982). The dose estimates for members of the nearby population groups are as follows. Of the three periods considered, the largest doses to the general population in the surrounding area would have occurred during the plant operations period (1957-1966). Dose estimates for the cleanup (1967-1969) and maintenance (1969-1982) periods are negligible in comparison. Based on the monitoring data, if there was a person residing continually in a dwelling 1.2 km (0.75 mi) north of the plant, this person is estimated to have received an average of about 96 mrem/yr (ranging from 50 to 160 mrem/yr) above background during plant operations, whereas the dose to a nearby resident during later years is estimated to have been about 0.4 mrem/yr during cleanup and about 0.2 mrem/yr during the maintenance period. These values may be compared with the background dose in Missouri of 120 mrem/yr

  20. Spring Dust Storm Smothers Beijing

    Science.gov (United States)

    2002-01-01

    A few days earlier than usual, a large, dense plume of dust blew southward and eastward from the desert plains of Mongolia-quite smothering to the residents of Beijing. Citizens of northeastern China call this annual event the 'shachenbao,' or 'dust cloud tempest.' However, the tempest normally occurs during the spring time. The dust storm hit Beijing on Friday night, March 15, and began coating everything with a fine, pale brown layer of grit. The region is quite dry; a problem some believe has been exacerbated by decades of deforestation. According to Chinese government estimates, roughly 1 million tons of desert dust and sand blow into Beijing each year. This true-color image was made using two adjacent swaths (click to see the full image) of data from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), flying aboard the OrbView-2 satellite, on March 17, 2002. The massive dust storm (brownish pixels) can easily be distinguished from clouds (bright white pixels) as it blows across northern Japan and eastward toward the open Pacific Ocean. The black regions are gaps between SeaWiFS' viewing swaths and represent areas where no data were collected. Image courtesy the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

  1. SPring-8 beamline control system.

    Science.gov (United States)

    Ohata, T; Konishi, H; Kimura, H; Furukawa, Y; Tamasaku, K; Nakatani, T; Tanabe, T; Matsumoto, N; Ishii, M; Ishikawa, T

    1998-05-01

    The SPring-8 beamline control system is now taking part in the control of the insertion device (ID), front end, beam transportation channel and all interlock systems of the beamline: it will supply a highly standardized environment of apparatus control for collaborative researchers. In particular, ID operation is very important in a third-generation synchrotron light source facility. It is also very important to consider the security system because the ID is part of the storage ring and is therefore governed by the synchrotron ring control system. The progress of computer networking systems and the technology of security control require the development of a highly flexible control system. An interlock system that is independent of the control system has increased the reliability. For the beamline control system the so-called standard model concept has been adopted. VME-bus (VME) is used as the front-end control system and a UNIX workstation as the operator console. CPU boards of the VME-bus are RISC processor-based board computers operated by a LynxOS-based HP-RT real-time operating system. The workstation and the VME are linked to each other by a network, and form the distributed system. The HP 9000/700 series with HP-UX and the HP 9000/743rt series with HP-RT are used. All the controllable apparatus may be operated from any workstation.

  2. Weldon Spring historical dose estimate

    Energy Technology Data Exchange (ETDEWEB)

    Meshkov, N.; Benioff, P.; Wang, J.; Yuan, Y.

    1986-07-01

    This study was conducted to determine the estimated radiation doses that individuals in five nearby population groups and the general population in the surrounding area may have received as a consequence of activities at a uranium processing plant in Weldon Spring, Missouri. The study is retrospective and encompasses plant operations (1957-1966), cleanup (1967-1969), and maintenance (1969-1982). The dose estimates for members of the nearby population groups are as follows. Of the three periods considered, the largest doses to the general population in the surrounding area would have occurred during the plant operations period (1957-1966). Dose estimates for the cleanup (1967-1969) and maintenance (1969-1982) periods are negligible in comparison. Based on the monitoring data, if there was a person residing continually in a dwelling 1.2 km (0.75 mi) north of the plant, this person is estimated to have received an average of about 96 mrem/yr (ranging from 50 to 160 mrem/yr) above background during plant operations, whereas the dose to a nearby resident during later years is estimated to have been about 0.4 mrem/yr during cleanup and about 0.2 mrem/yr during the maintenance period. These values may be compared with the background dose in Missouri of 120 mrem/yr.

  3. Spring plant phenology and false springs in the conterminous US during the 21st century

    Science.gov (United States)

    Allstadt, Andrew J.; Vavrus, Stephen J.; Heglund, Patricia J.; Pidgeon, Anna M.; Thogmartin, Wayne E.; Radeloff, Volker C.

    2015-01-01

    The onset of spring plant growth has shifted earlier in the year over the past several decades due to rising global temperatures. Earlier spring onset may cause phenological mismatches between the availability of plant resources and dependent animals, and potentially lead to more false springs, when subsequent freezing temperatures damage new plant growth. We used the extended spring indices to project changes in spring onset, defined by leaf out and by first bloom, and predicted false springs until 2100 in the conterminous United States (US) using statistically-downscaled climate projections from the Coupled Model Intercomparison Project 5 ensemble. Averaged over our study region, the median shift in spring onset was 23 days earlier in the Representative Concentration Pathway 8.5 scenario with particularly large shifts in the Western US and the Great Plains. Spatial variation in phenology was due to the influence of short-term temperature changes around the time of spring onset versus season long accumulation of warm temperatures. False spring risk increased in the Great Plains and portions of the Midwest, but remained constant or decreased elsewhere. We conclude that global climate change may have complex and spatially variable effects on spring onset and false springs, making local predictions of change difficult.

  4. Optimum Design of a Coil Spring for Improving the Performance of a Spring -Operated Mechanism

    International Nuclear Information System (INIS)

    Lee, Dae Woo; Sohn, Jeong Hyun; Yoo, Wan Suk

    2016-01-01

    In this study, a release test bed is designed to evaluate the dynamic behaviors of a coil spring. From the release tests, the dynamic behaviors of a coil spring are analyzed. A lumped parameter spring model was established for numerical simulation of a spring. The design variables of a coil spring are optimized by using the design of experiments approach. Two-level factorial designs are used for the design optimization, and the primary effects of the design variables are analyzed. Based on the results of the interaction analysis and design sensitivity analysis, the level of the design variables is rearranged. Finally, the mixed-level factorial design is used for the optimum design process. According to the optimum design of the opening spring, the dynamic performance of the spring-operated mechanism increases by 2.90

  5. 77 FR 29316 - Marine Protected Areas Federal Advisory Committee; Public Meeting

    Science.gov (United States)

    2012-05-17

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Marine Protected Areas.... ACTION: Notice of open meeting. SUMMARY: Notice is hereby given of a meeting of the Marine Protected Areas Federal Advisory Committee (Committee) in Silver Spring, Maryland. DATES: The meeting will be held...

  6. Public meeting

    CERN Multimedia

    HR Department

    2010-01-01

    Dear Colleagues, I am pleased to invite you to a public meeting which will be held on Thursday 11 November 2010 at 2:30 p.m., in the Main Auditorium (welcome coffee from 2 p.m.) In this meeting Sigurd Lettow, Director for Administration and General Infrastructure will present the Management’s proposals towards restoring full funding of the Pension Fund. The meeting will follow discussions which took place with the Staff Association, at the Standing Concertation Committee (CCP) of 1 November 2010 and will be held with the Members States, at the Tripartite Employment Conditions Forum (TREF) of 4 November 2010. You will be able to attend this presentation in the Main Auditorium or via the webcast. The Management will also be available to reply to your questions on this subject. Best regards, Anne-Sylvie Catherin

  7. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2010 at 9:15 a.m. in room 60-6-002 Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department The CERN Ombuds The new account management system Crèche progress + Restaurants Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch   Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  8. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2011 At 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN The new account management system Users’ Office news Any Other Business Agenda for the next meeting   Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium ...

  9. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2010 at 9:15 a.m. in Room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS Department An update on Safety at CERN The CERN Summer Student program Bringing Library services to users Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  10. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department CERN Global Network An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) ...

  11. Thermal springs of Malaysia and their potentialdevelopment

    Science.gov (United States)

    Rahim Samsudin, Abdul; Hamzah, Umar; Rahman, Rakmi Ab.; Siwar, Chamhuri; Fauzi Mohd. Jani, Mohd; Othman, Redzuan

    The study on the potential development of hot springs for the tourism industry in Malaysiawas conducted. Out of the 40 hot springs covered, the study identified 9 hot springs having a high potential for development, 14 having medium potential and the remaining 17 having low or least potential for development. This conclusion was arrived at after considering the technical and economic feasibility of the various hot springs. Technical feasibility criteria includes geological factors, water quality, temperature and flow rate. The economic feasibility criteria considers measures such as accessibility, current and market potentials in terms of visitors, surrounding attractions and existing inventory and facilities available. A geological input indicates that high potential hot springs are located close to or within the granite body and associated with major permeable fault zones. They normally occur at low elevation adjacent to topographic highs. High potential hot springs are also characterised by high water temperature, substantial flowrate and very good water quality which is important for water-body contact activities such as soaking. Economic criteria for high potential hot springs are associated with good accessibility, good market, good surrounding attractions like rural and village setting and well developed facilities and infrastructures.

  12. Sampling and analysis of 100 Area springs

    International Nuclear Information System (INIS)

    1992-02-01

    This report is submitted in fulfillment of Hanford Federal Facility Agreement and Consent Order Milestone M-30-01, submit a report to EPA and Ecology evaluating the impact to the Columbia River from contaminated springs and seeps as described in the operable unit work plans listed in M-30-03. Springs, seeps, sediments, and the Columbia River were sampled for chemical and radiological analyses during the period September 16 through October 21, 1991. A total of 26 locations were sampled. Results of these analyses show that radiological and nonradiological contaminants continue to enter the Columbia River from the retired reactor areas of the 100 Area via the springs. The primary contaminants in the springs are strontium-90, tritium, and chromium. These contaminants were detected in concentrations above drinking water standards. Analysis of total organic carbon were run on all water samples collected; there is no conclusive evidence that organic constituents are entering the river through the springs. Total organic carbon analyses were generally higher for the surface water than for the springs. The results of this study will be used to develop a focused, yet flexible, long-term spring sampling program. Analysis of Columbia River water samples collected at the Hanford Townsite (i.e., downstream of the reactor areas) did not detect any Hanford-specific contaminants

  13. Shallow groundwater investigations at Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1991-06-01

    The Missouri Department of Natural Resources, Division of Geology and Land Survey (MDNR-DGLS) conducted investigations of the upper aquifer in the vicinity of the abandoned Weldon Spring Chemical Plant in southwest St. Charles County, Missouri. The objective of the investigation was to better define the relationships between precipitation, surface runoff, groundwater recharge and shallow groundwater discharge within the study area, thereby assisting the Department of Energy in designing an appropriate groundwater monitoring plan for the Weldon Spring Site Remedial Action Project. The results of the investigations indicate that the upper aquifer has been affected by karst development but that well developed karst does not exist on or around the site. Dye traces conducted during the study have shown that surface water which leaves the site enters the subsurface in losing streams around the site and travels rapidly to one or more local springs. Upper aquifer recharge areas, constructed from dye trace and potentiometric data, generally follow surface water drainage patterns on the south side of the site, but cross surface-water drainage divides north of the site. Nine springs may receive recharge from site runoff, depending upon the amount of runoff. In addition to these springs, one perennial spring and two intermittent springs to the southwest of the site may receive recharge from site infiltration. 25 refs., 13 figs

  14. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1978-01-01

    A bimetallic grid spacer is described comprising a grid structure of zircaloy formed by intersecting striplike members which define fuel element openings for receiving fuel elements and spring strips made of Inconel positioned within the grid structure for cooperating with the fuel elements to maintain them in their desired position. A plurality of these spring strips extend longitudinally between sides of the grid structure, being locked in position by the grid retaining strips. The fuel rods, which are disposed in the fuel openings formed in the grid structure, are positioned by means of the springs associated with the spring strips and a plurality of dimples which extend from the zircaloy grid structure into the openings. In one embodiment the strips are disposed in a plurality of arrays with those spring strip arrays situated in opposing diagonal quadrants of the grid structure extending in the same direction and adjacent spring strip arrays in each half of the spacer extending in relatively perpendicular directions. Other variations of the spring strip arrangements for a particular fuel design are disclosed herein

  15. Spring/dimple instrument tube restraint

    International Nuclear Information System (INIS)

    DeMario, E.E.; Lawson, C.N.

    1993-01-01

    A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs. 7 figures

  16. Staff meeting

    CERN Document Server

    2006-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Thursday 18 January 2007 at 3:00 p.m. Main Auditorium (bldg.. 500) to convey my best wishes for the new year, to review CERN's activities during 2006 and to present the perspectives for this special year of the LHC start-up. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg.. 31) and the AT Auditorium (bldg.. 30). Simultaneous translation into English will be available in the main Auditorium. Robert AYMAR

  17. Scientific meetings

    International Nuclear Information System (INIS)

    1973-01-01

    One of the main aims of the IAEA is to foster the exchange of scientific and technical information and one of the main ways of doing this is to convene international scientific meetings. They range from large international conferences bringing together several hundred scientists, smaller symposia attended by an average of 150 to 250 participants and seminars designed to instruct rather than inform, to smaller panels and study groups of 10 to 30 experts brought together to advise on a particular programme or to develop a set of regulations. The topics of these meetings cover every part of the Agency's activities and form a backbone of many of its programmes. (author)

  18. STAFF MEETING

    CERN Multimedia

    Robert Aymar

    2005-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Thursday 12 January 2006 at 4:00 p.m. - Main Auditorium (bldg. 500) to convey my best wishes for the new year, to review CERN's activities during 2005 and to present the perspectives for this coming year. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). A simultaneous translation into English will be available in the main Auditorium. Best wishes for the festive season Robert AYMAR

  19. STAFF MEETING

    CERN Multimedia

    2004-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Tuesday 13 January 2004 at 4:00 p.m. - Main Auditorium (bldg. 500) to convey my best wishes for the new year and to present a perspective of CERN's future activities. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). A simultaneous translation into English will be available in the main Auditorium. Robert AYMAR

  20. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

      Public meetings : Come and talk about your future employment conditions !   The Staff Association will come and present the results of our survey on the 2015 five-yearly review. Following the survey, the topics discussed, will be contract policy, recognition of merit (MARS), working time arrangements and family policy. After each meeting and around a cup of coffee or tea you will be able to continue the discussions. Do not hesitate to join us, the five-yearly review, it is with YOU!

  1. Vibro-spring particle size distribution analyser

    International Nuclear Information System (INIS)

    Patel, Ketan Shantilal

    2002-01-01

    This thesis describes the design and development of an automated pre-production particle size distribution analyser for particles in the 20 - 2000 μm size range. This work is follow up to the vibro-spring particle sizer reported by Shaeri. In its most basic form, the instrument comprises a horizontally held closed coil helical spring that is partly filled with the test powder and sinusoidally vibrated in the transverse direction. Particle size distribution data are obtained by stretching the spring to known lengths and measuring the mass of the powder discharged from the spring's coils. The size of the particles on the other hand is determined from the spring 'intercoil' distance. The instrument developed by Shaeri had limited use due to its inability to measure sample mass directly. For the device reported here, modifications are made to the original configurations to establish means of direct sample mass measurement. The feasibility of techniques for measuring the mass of powder retained within the spring are investigated in detail. Initially, the measurement of mass is executed in-situ from the vibration characteristics based on the spring's first harmonic resonant frequency. This method is often erratic and unreliable due to the particle-particle-spring wall interactions and the spring bending. An much more successful alternative is found from a more complicated arrangement in which the spring forms part of a stiff cantilever system pivoted along its main axis. Here, the sample mass is determined in the 'static mode' by monitoring the cantilever beam's deflection following the wanton termination of vibration. The system performance has been optimised through the variations of the mechanical design of the key components and the operating procedure as well as taking into account the effect of changes in the ambient temperature on the system's response. The thesis also describes the design and development of the ancillary mechanisms. These include the pneumatic

  2. Executive summary: Weldon Spring Site Environmental Report for calendar year 1992. Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This report has been prepared to provide information about the public safety and environmental protection programs conducted by the Weldon Spring Site Remedial Action Project. The Weldon Spring site is located in southern St. Charles County, Missouri, approximately 48 km (30 mi) west of St. Louis. The site consists of two main areas, the Weldon Spring Chemical Plant and raffinate pits and the Weldon Spring Quarry. The objectives of the Site Environmental Report are to present a summary of data from the environmental monitoring program, to characterize trends and environmental conditions at the site, and to confirm compliance with environmental and health protection standards and requirements. The report also presents the status of remedial activities and the results of monitoring these activities to assess their impacts on the public and environment. The scope of the environmental monitoring program at the Weldon Spring site has changed since it was initiated. Previously, the program focused on investigations of the extent and level of contaminants in the groundwater, surface waters, buildings, and air at the site. In 1992, the level of remedial activities required monitoring for potential impacts of those activities, particularly on surface water runoff and airborne effluents. This report includes monitoring data from routine radiological and nonradiological sampling activities. These data include estimates of dose to the public from the Weldon Spring site; estimates of effluent releases; and trends in groundwater contaminant levels. Also, applicable compliance requirements, quality assurance programs, and special studies conducted in 1992 to support environmental protection programs are reviewed.

  3. Crisis meeting

    CERN Multimedia

    Staff Association

    2014-01-01

      To all CERN staff: your rights are at risk ! We invite you to come to a crisis meeting on Wednesday 2nd April at 10:30 a.m., Auditorium, Main Building, Meyrin site. Your presence is crucial, we are ALL concerned !

  4. Crisis meeting

    CERN Multimedia

    Staff Association

    2015-01-01

    To all CERN staff: your rights are at risk! We invite you to come to a crisis meeting on Thursday 7th May 2015 at 9 a.m., Auditorium, Main Building, Meyrin site. Your presence is crucial, we are ALL concerned!

  5. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 4 December 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Fellows, Associates and Summer Student Programmes Particle Data Book distribution Revoking Computer accounts Equipment insurance on site Reports from ACCU representatives on other committees Users' Office news Any Other Business Dates for meetings in 2003 Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (74837...

  6. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria  W. Adam  (71661) Belgium  G. Wilquet  (74664) Bulgaria  R. Tzenov  (77958) Czech Republic  P. Závada&am...

  7. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) Fr...

  8. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :   Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)...

  9. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Re...

  10. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 15 June 2011 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN Reports from ACCU representatives on other Committees a. Scientific Information Policy Board (SIPB) b. IT Service Review Meeting (ITSRM) c. GS User Commission Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in bra...

  11. SPring-8 and application of nuclear scattering

    Energy Technology Data Exchange (ETDEWEB)

    Harami, Taikan [Japan Atomic Energy Research Inst., Kamigori, Hyogo (Japan). Kansai Research Establishment

    1997-03-01

    The SPring-8 has Linac synchrotron, incidence type facility and an accumulation ring. By preparing a beam line to take out light at the accumulation ring, the SPring-8 is supplied for common applications. Development of science adopting new method to study of properties and organisms by using high brightness source is expected. Construction of the SPring-8 accelerator was finished and adjusting test and commissioning of apparatuses are now in proceeding. At pre-use inspection of the accumulation ring on March, 1997, beam lines for R and D and crystalline structure analysis are applied to the Science and Technology Agency to inspect them simultaneously. And, by activating character of the SPring-8 radiation facility of high brightness and high energy X-ray generator, property study using Moessbauer nuclide to a probe can be conducted. (G.K.)

  12. Diagenetic Changes in Common Hot Spring Microfacies

    Science.gov (United States)

    Hinman, N. W.; Kendall, T. A.; MacKenzie, L. A.; Cady, S. D.

    2016-05-01

    The friable nature of silica hot spring deposits makes them susceptible to mechanical weathering. Rapid diagenesis must take place for these rocks to persist in the geologic record. The properties of two microfacies at two deposits were compared.

  13. Optical spring effect in nanoelectromechanical systems

    International Nuclear Information System (INIS)

    Tian, Feng; Zhou, Guangya; Du, Yu; Chau, Fook Siong; Deng, Jie

    2014-01-01

    In this Letter, we report a hybrid system consisting of nano-optical and nano-mechanical springs, in which the optical spring effect works to adjust the mechanical frequency of a nanoelectromechanical systems resonator. Nano-scale folded beams are fabricated as the mechanical springs and double-coupled one-dimensional photonic crystal cavities are used to pump the “optical spring.” The dynamic characteristics of this hybrid system are measured and analyzed at both low and high input optical powers. This study leads the physical phenomenon of optomechanics in complex nano-opto-electro-mechanical systems (NOEMS) and could benefit the future applications of NOEMS in chip-level communication and sensing

  14. Stravinsky: The Rite of Spring. Canticum sacrum

    Index Scriptorium Estoniae

    1996-01-01

    Uuest heliplaadist "Stravinsky: The Rite of Spring. Canticum sacrum. Requiem canticles. Choral Variations on "Vom Himmel hoch". Lausanne Pro Arte Choir, Suisse Romande Chamber Choir and Orchestra, Neeme Järvi" Chandos CHAN 9408 (75 minutes:DDD)

  15. Coastal Energy Corporation, Willow Springs, MO

    Science.gov (United States)

    notice of a proposed Administrative Penalty Assessment against Coastal Energy Corporation, located at 232 Burnham Road, Willow Springs, Missouri, for alleged violations at the facility located at or near that facility.

  16. Beamlines on the SPring-8 project

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, Hideo [Japan Atomic Energy Research Inst., Kamigori, Hyogo (Japan). Kansai Research Establishment

    1997-03-01

    SPring-8 project is going to construct a ultrahigh-brilliance X-ray synchrotron radiation facility and commissioning of the storage ring is expected in Spring 1977. The facility will be available to scientists and engineers of universities, national laboratories and industries not only from Japan but also from abroad. 20 proposals for public beamlines are submitted to the Beamline Committee and the ten public beamlines are scheduled for completion by the end of 1997. (author)

  17. Visit to valuable water springs. 22. ; Kanazawa spring and springs at the mountain flank of Iwate volcano. Meisui wo tazunete. 22. ; Kanazawa shimizu to Iwate sanroku yusuigun

    Energy Technology Data Exchange (ETDEWEB)

    Itadera, K. (Kanagawa Hot Springs Research Institute, Kanagawa (Japan)); Shimano, Y. (Utsunomiya Bunsei Junior College, Tochigi (Japan))

    1993-06-30

    This paper describes the following matters on the springs at the mountain flank of Iwate volcano in Iwate Prefecture, with the Kanazawa spring as the main subject: The new and old Iwate volcanos have rock-bed flow deposits which resulted from mountain disintegration, distributed over their south, east and north flanks, and most of the spring water wells up in these areas; the south, east and north flanks have about 80 springs, about 30 springs, and about 10 springs, respectively; the number of springs and the water well-up scale show a trend of inverse proportion; the Kanazawa spring is a generic name of the several springs located on the north flank in the Kanazawa area; its main spring forms a spring pond with an area of about 100 m[sup 2] with a spring water temperature of about 11.5[degree]C, electric conductivity of 200 [mu] S/cm or higher, and a flow-out rate of 500 l/s or more; the Kanazawa spring is characterized by having as large total dissolved component amount as 170 mg/l or more and abundant amount of SO4[sup 2-] and Cl[sup -]; and the spring presents properties different from those in other springs. 10 refs., 5 figs., 1 tab.

  18. Strontium isotopic composition of hot spring and mineral spring waters, Japan

    International Nuclear Information System (INIS)

    Notsu, Kenji; Wakita, Hiroshi; Nakamura, Yuji

    1991-01-01

    In Japan, hot springs and mineral springs are distributed in Quaternary and Neogene volcanic regions as well as in granitic, sedimentary and metamorphic regions lacking in recent volcanic activity. The 87 Sr/ 86 Sr ratio was determined in hot spring and mineral spring waters obtained from 47 sites. The ratios of waters from Quaternary and Neogene volcanic regions were in the range 0.703-0.708, which is lower than that from granitic, sedimentary and metamorphic regions (0.706-0.712). The geographical distribution of the ratios coincides with the bedrock geology, and particularly the ratios of the waters in Quaternary volcanic regions correlate with those of surrounding volcanic rocks. These features suggest that subsurface materials control the 87 Sr/ 86 Sr ratios of soluble components in the hot spring and mineral spring waters. (author)

  19. RIKEN-JAERI 8-GeV synchrotron radiation project - SPring-8

    International Nuclear Information System (INIS)

    Awaya, Yohko

    1990-01-01

    The plan of an 8-GeV synchrotron radiation facility, which is called SPring-8 (Super Photon Ring-8GeV), had been proposed by Science and Technology Agency (STA) in Japan and it was decided that its construction would be started from April 1990. An atomic physics group in Japan had the first meeting in December 1988 to discuss the future studies of atomic physics and related problems at SPring-8 and plans of research and development (R and D) for them. Their report was published in May 1990. In this report, an outline of SPring-8 is described. Results of the discussions of Japanese working group of atomic physics and the present status of R and D of this group will be presented by M. Kimura in this workshop

  20. 75 FR 16749 - Marine Protected Areas Federal Advisory Committee; Public Meeting

    Science.gov (United States)

    2010-04-02

    ... Protected Areas Federal Advisory Committee (Committee) in Charleston, South Carolina. DATES: The meeting..., National Marine Protected Areas Center, 1305 East West Highway, Silver Spring, Maryland 20910. (Phone: 301... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration (NOAA) Marine Protected...

  1. Geochemical and hydrologic data for wells and springs in thermal-spring areas of the Appalachians

    Energy Technology Data Exchange (ETDEWEB)

    Hobba, W.A. Jr.; Chemerys, J.C.; Fisher, D.W.; Pearson, F.J. Jr.

    1976-07-01

    Current interest in geothermal potential of thermal-spring areas in the Appalachians makes all data on thermal springs and wells in these areas valuable. Presented here without interpretive comment are maps showing selected springs and wells and tables of physical and chemical data pertaining to these wells and springs. The chemical tables show compositions of gases (oxygen, nitrogen, argon, methane, carbon dioxide, and helium), isotope contents (tritium, carbon (13), and oxygen (18)), trace and minor element chemical data, and the usual complete chemical data.

  2. Groundwater monitoring strategies at the Weldon Spring site, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    Meyer, K.A. Jr.

    1988-01-01

    This paper presents groundwater monitoring strategies at the Weldon Spring Site in east-central Missouri. The Weldon Spring Site is former ordnance works and uranium processing facility. In 1987, elevated levels of inorganic anions and nitroaromatics were detected in groundwater beneath the site. Studies are currently underway to characterize the hydrogeologic regime and to define groundwater contamination. The complex hydrogeology at the Weldon Spring Site requires innovative monitoring strategies. Combinations of fracture and conduit flow exist in the limestone bedrock. Perched zones are also present near surface impoundments. Losing streams and springs surround the site. Confronting this complex combination of hydrogeologic conditions is especially challenging

  3. The source, discharge, and chemical characteristics of water from Agua Caliente Spring, Palm Springs, California

    Science.gov (United States)

    Contributors: Brandt, Justin; Catchings, Rufus D.; Christensen, Allen H.; Flint, Alan L.; Gandhok, Gini; Goldman, Mark R.; Halford, Keith J.; Langenheim, V.E.; Martin, Peter; Rymer, Michael J.; Schroeder, Roy A.; Smith, Gregory A.; Sneed, Michelle; Martin, Peter

    2011-01-01

    Agua Caliente Spring, in downtown Palm Springs, California, has been used for recreation and medicinal therapy for hundreds of years and currently (2008) is the source of hot water for the Spa Resort owned by the Agua Caliente Band of the Cahuilla Indians. The Agua Caliente Spring is located about 1,500 feet east of the eastern front of the San Jacinto Mountains on the southeast-sloping alluvial plain of the Coachella Valley. The objectives of this study were to (1) define the geologic structure associated with the Agua Caliente Spring; (2) define the source(s), and possibly the age(s), of water discharged by the spring; (3) ascertain the seasonal and longer-term variability of the natural discharge, water temperature, and chemical characteristics of the spring water; (4) evaluate whether water-level declines in the regional aquifer will influence the temperature of the spring discharge; and, (5) estimate the quantity of spring water that leaks out of the water-collector tank at the spring orifice.

  4. Ground water monitoring strategies at the Weldon Spring Site, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    Meyer, K.A. Jr.

    1988-01-01

    This paper presents ground water monitoring strategies at the Weldon Spring Site in east-central Missouri. The Weldon Spring Site is a former ordnance works and uranium processing facility. In 1987, elevated levels of inorganic anions and nitroaromatics were detected in ground water beneath the site. Studies are currently underway to characterize the hydrogeologic regime and to define ground water contamination. The complex hydrogeology at the Weldon Spring Site requires innovative monitoring strategies. Combinations of fracture and conduit flow exist in the limestone bedrock. Perched zones are also present near surface impoundments. Losing streams and springs surround the site. Solving this complex combination of hydrogeologic conditions is especially challenging

  5. Public meetings

    CERN Multimedia

    Staff Association

    2012-01-01

    MARS PENSIONS CONTRACT POLICY GENERAL INFORMATION   PUBLIC MEETINGS COME AND BE INFORMED! Public meetings Monday 15 Oct. 2 pm Amphi IT, 31-3-004 Meyrin Wednesday 17 Oct. 10 am Amphi BE, 864-1-D02 Prévessin Thursday 18 Oct. 10 am Salle du Conseil/ Council Chamber 503-1-001 Meyrin Thursday 18 Oct. 2 pm Filtration Plant, 222-R-001(in English) Meyrin   Overview of the topics to be discussed Recognition of Merit – MARS Outcome of last exercise 2007 to 2012 : lessons learned Pension Fund Capital preservation policy : what is it ? Contract policy LC2IC statistics SA proposal General information CVI 2013 Voluntary programmes (PRP, SLS)  

  6. Staff meeting

    CERN Multimedia

    2007-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Wednesday 16 January 2008 at 3:00 p.m. Main Auditorium (bldg 500) to convey my best wishes for the new year, to review CERN’s activities during 2007 and to present the perspectives for 2008, the year of the LHC start-up. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (Bldg. 31) and the AT Auditorium (Bldg. 30). Simultaneous translation into English will be available in the main Auditorium. Best wishes for the festive season! Robert AYMAR

  7. Meeting information

    Science.gov (United States)

    The 1986 Ocean Sciences Meeting of the American Geophysical Union and the American Society of Limnology and Oceanography (ASLO) will be held January 13-17, 1986, in New Orleans, La., at the Fairmont Hotel. Co-sponsoring societies are the Acoustical Society of America (ASA), the American Meteorological Society (AMS), the Marine Technology Society (MTS), and the Institute of Electrical and Electronics Engineers, Oceanic Engineering Society (OES).

  8. ACCU Meeting

    CERN Multimedia

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 6. The PH Department 2. Adoption of the agenda 7. Reports from ACCU representatives on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. News from the CERN Management 9. Any Other Business 5. Matters arising 10. Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (79573) Portugal P. Bordalo (74704) Czech Republic P. Závada ...

  9. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting News from the CERN Management Matters arising The PH Department Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin...

  10. ACCU MEETING

    CERN Multimedia

    Chris Onions/EP (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising EP Space management Cars Housing EDH from the User's point of view VRVS Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) France M. Déj...

  11. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 8 March 2006 At 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  12. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tEmergency Services at CERN 2.\tAdoption of the agenda\t8.\tThe Meyrin Tram project 3.\tMinutes of the previous meeting9.\tReports from ACCU representatives on other committees 4.\tMatters arising10.\tUsers’ Office news 5.\tNews from the CERN Management11.\tElection of ACCU Chair 6. LHC 2008 start-up events 6.\tLogistics and transport at CERN 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Aust...

  13. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tAn update on safety at CERN 7.\tChildcare initiative 8.\tReports from ACCU representatives on other committees 9.\tUsers’ Office news 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75...

  14. ACCU meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tLHC 2008 start-up events 7.\tEmergency Services at CERN 8.\tThe Meyrin Tram project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tElection of ACCU Chair 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilq...

  15. ACCU MEETING

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941...

  16. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2005 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer S. Laplace...

  17. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (7...

  18. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in room 60-6-002 1.     Chairman's remarks 2.     Adoption of the agenda 3.     Minutes of the previous meeting 4.     Matters arising 5.     News from the CERN Management 6.     Report on Fellows and Associates programme 7.     Overview of safety at CERN 8.     Reports from ACCU representatives on other committees 9.     Users' Office news 10.  Any Other Business 11.  Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets):Austria W. Adam  (71661) Belgium G. Wilquet (74664) Bulgaria ...

  19. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 December 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Closure of computer accounts upon CERN contract expiry Reports from ACCU representatives on other committees Users' Office news Election of ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets). Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  20. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 June 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Open Access Publishing Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini ...

  1. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agendafor the meeting to be held on Wednesday 8 March 2006At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Fin...

  2. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2005 At 9:15 a.m. in room 160-1-009 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Purchasing procedures at CERN Reports from ACCU representatives on other committees Users' Office news CERN Clubs Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Las...

  3. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tCar sharing pilot project 2.\tAdoption of the agenda\t8.\tReports from ACCU representatives on other committees 3.\tMinutes of the previous meeting9.\tUsers’ Office newss 4.\tMatters arising10.\tAny Other Business 5.\tNews from the CERN Management11.\tAgenda for the next meeting 6.\tLogistics and transport at CERN Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)...

  4. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  5. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  6. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (7594...

  7. ACCU MEETING

    CERN Multimedia

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on Fellows and Associates Programme Overview of safety at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K....

  8. ACCU meeting

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  9. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2008 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria, W. Adam (71661) Belgium, C. Vander Velde (71539) Bulgaria Czech Republic, P. Závada (75877) Denmark, J.B. Hansen (...

  10. ACCU MEETING

    CERN Document Server

    Chris Onions

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Dosimetry at CERN Status of collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office newss Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (7935...

  11. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. ...

  12. ACCU MEETING

    CERN Multimedia

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 6.\tDosimetry at CERN 2.\tAdoption of the agenda 7.\tStatus of collaborative tools at CERN 3.\tMinutes of the previous meeting 8.\tReports from ACCU representatives on other committees 4.\tMatters arising 9.\tUsers’ Office newss 5.\tNews from the CERN Management 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway G. Løvhøiden (73176) Belgium G. Wilquet (74664) Poland M. Witek (78967) Bulgaria Portugal...

  13. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (...

  14. ACCU Meeting

    CERN Multimedia

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  15. ACCU Meeting

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - W. Adam (71661) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (75877) Denmark - J.B. Hansen...

  16. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finl...

  17. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finlan...

  18. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 3 December 2008 at 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. ...

  19. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks6.\tLogistics and transport at CERN2.\tAdoption of the agenda\t7.\tCar sharing pilot project3.\tMinutes of the previous meeting8.\tReports from ACCU representatives on other committees4.\tMatters arising9.\tUsers’ Office newss5.\tNews from the CERN Management10.\tAny Other Business11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)Bulgaria\tPortugalP...

  20. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. La...

  1. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiis...

  2. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskin...

  3. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2001 At 9:15 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Video-conferencing/recording Fellows programme Operational Circular No. 6 EP Space management Update on Computing Issues Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary)  ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic...

  4. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equal Opportunities Commission 2. Adoption of the agenda 8. Registration plans for portables 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgar...

  5. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda,8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting9. Reports from ACCU representatives on other committees 4. Matters arising10. Users' Office news 5. News from the CERN Management11. Any Other Business 6. CHIS news and follow-up of survey12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661)NorwayH. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (7591...

  6. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 September 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Health Insurance Questionnaire Host States Relations Service Update on EP Space management Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (...

  7. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Ada...

  8. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda 8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. Health Insurance news and follow-up of survey 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wil...

  9. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Reports from ACCU representatives 2. Adoption of the agenda on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. Matters arising 9. Any Other Business 5. News from the CERN Management 10. Agenda for the next meeting 6. Property Protection at CERN Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (74837) Portugal P. Bordalo (74704) Czech Republic ...

  10. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Registration plans for portables 2. Adoption of the agenda 9. Reports from ACCU representatives 3. Minutes of the previous meeting on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting 7. Equal Opportunities Commission Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): AustriaW. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgari...

  11. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (716...

  12. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 March 2002 At 9:15 a.m. in the Council Chamber Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Follow-up on Space Management Users' Desktop needs PIE procedures Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer L. Serin (712...

  13. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha...

  14. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building 1. Chairman's remarks 2. Adoption of the agenda 3. News from the CERN Management 4. Minutes of the previous meeting 5. Matters arising 6. Report from the Scientific Information Policy Board 7. Report from ETT Division: The Press Office 8. Update on Computing Issues 9. Users' Office News 10. Any Other Business 11. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Bryan Pattison (Secretary). ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Z vada (75...

  15. ACCU MEETING

    CERN Multimedia

    Bryan Pattison

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building1. Chairman's remarks2. Adoption of the agenda3. News from the CERN Management4. Minutes of the previous meeting5. Matters arising6. Report from the Scientific Information Policy Board7. Report from ETT Division: The Press Office8. Update on Computing Issues9. Users' Office News10. Any Other Business11. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail toBryan Pattison(Secretary).ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :Austria G. Neuhofer (74094)Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)Czech Republic P. Závada (75877)Den...

  16. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha ...

  17. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The CERN Press Office An update on Safety at CERN The Burotel project Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denmark...

  18. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (Chairperson) (71539) Bulgaria Czech Republic S. Nemecek (71144) ...

  19. ACCU MEETING

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2011 at 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda      Minutes of the previous meeting Matters arising       News from the CERN Management Report on services from GS department Report on new CHIS rules Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria M. Jeitler (76307) Belgium C. Vander Velde (Chairperson)...

  20. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of conduct 7.\tEqual Opportunities at CERN 8.\tAn update on safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tOther business 13.\tAgenda of the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Re...

  1. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 June 2009At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management CERN Social Services User services in GS Department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - G. Walzel (76592) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (7587...

  2. ACCU Meeting

    CERN Multimedia

    Chris Onions

    DRAFT Agenda for the meeting to be held on Wednesday 9 December 2009 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Restaurant No. 1 extension An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Election of the ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Záv...

  3. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of Conduct 7.\tEqual Opportunities at CERN 8.\tAn update on Safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Cze...

  4. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tThe CERN Press Office 7.\tAn update on Safety at CERN 8.\tThe Burotel project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria C...

  5. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (7...

  6. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users'Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) ...

  7. Crop Sequence Influences on Sustainable Spring Wheat Production in the Northern Great Plains

    Directory of Open Access Journals (Sweden)

    Joseph M. Krupinsky

    2010-11-01

    Full Text Available Cropping systems in American agriculture are highly successful since World War II, but have become highly specialized, standardized, and simplified to meet the demands of an industrialized food system. Minimal attention has been given to the efficient exploitation of crop diversity and the synergistic and/or antagonistic relationships of crops in crop sequences. Objectives of our research were to determine if previous crop sequences have long-term benefits and/or drawbacks on spring wheat seed yield, seed N concentration, and seed precipitation-use efficiency in the semiarid northern Great Plains, USA. Research was conducted 6 km southwest of Mandan, ND using a 10 × 10 crop matrix technique as a research tool to evaluate multiple crop sequence effects on spring wheat (triticum aestivum L. production in 2004 and 2005. Spring wheat production risks can be mitigated when second year crop residue was dry pea (Pisium sativum L. averaged over all first year crop residues. When compared to spring wheat as second year crop residue in the dry year of 2004, dry pea as the second year residue crop resulted in a 30% spring wheat seed yield increase. Sustainable cropping systems need to use precipitation efficiently for crop production, especially during below average precipitation years like 2004. Precipitation use efficiency average over all treatments, during the below average precipitation year was 23% greater than the above average precipitation year of 2005. Diversifying crops in cropping systems improves production efficiencies and resilience of agricultural systems.

  8. Assessment of sulfurous springs in the west of Iraq for balneotherapy, drinking, irrigation and aquaculture purposes.

    Science.gov (United States)

    Awadh, Salih Muhammad; Al-Ghani, Sura Abdul

    2014-06-01

    This research deals with the sulfurous spring waters flow along the course of the Euphrates River in western Iraq in the area extended between Haqlaniya and Hit within the Al-Anbar governorate. Eleven springs (3 in Haqlanya, 4 in Kubaysa and 4 in Hit) have been addressed for the purpose of water evaluation for balneology, drinking, irrigation and aquaculture (fish farming). In order to meet the objectives of this research, all springs were sampled and analyzed for the total dissolved solid, electrical conductivity, pH, temperature, major cations (Ca(2+), Mg(2+), Na(+) and K(+)), major anions (SO(4)(2-), Cl(-), HCO(3)(-) and CO(3)(2-)), minor anions (PO(4)(3-)and NO(3)(-)) as well as the trace elements that included Pb, Zn, Cd, Ni, Fe, Mn, Cu, Br, F, Ba, B, Sr, Al, As, Cr, Hg and Se. The International Standards of World Health Organization are used for assessing the water quality. The results revealed that the springs belong to the tepid springs of 27-30 °C and classified as hypothermal to the thermal springs. Lithochemistry and geochemical processes clearly affected the water chemistry. The hydrogeochemical processes are responsible for the element enrichment in water by the chemical dissolution of carbonate and gypsum and evaporation as well. The results of the study indicate the possibility of using spring water for therapeutic purposes, but not allowed for drinking and aquaculture (fish farming), except those free of H(2)S gas. On the other hand, it can be used for irrigation with risk. However, soil type as well as proper selection of plants should be taken into consideration.

  9. Class structure of the Injector Linac control system of SPring-8

    International Nuclear Information System (INIS)

    Yoshikawa, H.; Itoh, Y.; Tamezane, K.; Sakaki, Y.; Kodera, M.; Yokomizo, H.

    1994-01-01

    The first section of the Injector Linac for SPring-8 has been constructed and the initial beam meets the specification. This section, from the electron gun to the buncher and monitors, is also used as a test stand for the control software. The concept of Object-Oriented programming was adopted because of the special requirements for the accelerator control. We present an overview of the linac control system and the software architecture. ((orig.))

  10. Hydrochemical Characteristics of Springs in Oke–Igbo, Ondo State ...

    African Journals Online (AJOL)

    Michael Horsfall

    each spring and analyzed for temperature, pH, electrical conductivity (EC), total dissolved solids (TDS), total ... Boiling of the spring water, is therefore, .... spring against sudden change in pH might also .... The altitude of the springs may have.

  11. Spring Bird Migration Phenology in Eilat, Israel

    Directory of Open Access Journals (Sweden)

    Reuven Yosef

    2009-12-01

    Full Text Available Analysis of the mean date of first captures and median arrival dates of spring migration for 34 species of birds at Eilat, Israel, revealed that the earlier a species migrates through Eilat, the greater is the inter-annual variation in the total time of its passage. Birds arrive during spring migration in Eilat in four structured and independent waves. The annual fluctuation in the initial arrival dates (initial capture dates and median dates (median date of all captures, not including recaptures, did not depend on the length of the migratory route. This implies that migrants crossing the Sahara desert depart from their winter quarters on different Julian days in different years. We suggest that negative correlations between the median date of the spring migration of early and late migrants depends upon the easterly (Hamsin wind period. Moreover, we believe that the phenology of all birds during spring migration in Eilat is possibly also determined by external factors such as weather conditions on the African continent or global climatic processes in the Northern hemisphere. Orphean Warblers (Sylvia hortensis show a strong positive correlation (rs=-0.502 of initial capture date with calendar years, whereas other species such as Barred Warbler (S. nisoria; rs = -0.391 and Spotted Flycatcher (Muscicapa striata; rs = -0.398 display an insignificant trend. The Dead Sea Sparrow (Passer moabiticus and Red-Backed Shrike (Lanius collurio are positively correlated regarding initial arrival date and medians of spring migration.

  12. Geothermal energy and hot springs in Ethiopia

    Energy Technology Data Exchange (ETDEWEB)

    Koga, T. (Hot Springs Therapeutics Research Institute, Kyushu, Univ., Japan)

    1971-01-01

    The hot springs in Ethiopia are concentrated in two areas: the North Afar depression and adjacent Red Sea shore, and a geothermal field 100 km from northeast to southwest in the central part of Ethiopia. The latter extends not only to the Great Rift Valley but also to the Aden Gulf. In the lake district in the central Great Rift Valley, there are a number of hot springs on the lake shore. These are along NE-SW fault lines, and the water is a sodium bicarbonate-type rich in HCO/sub 3/ and Na but low in C1 and Ca. In Dallol in the North Afar depression, CO/sub 2/-containing hot springs with high temperatures (110/sup 0/C) and a specific gravity of 1.4, were observed. In the South Afar depression, located in the northeastern part of the Rift Valley, there are many active volcanoes and hot springs between the lake district and the Danakil depression. The spring water is a sodium bicarbonate saline type. Nine graphs and maps are included.

  13. Characterization of the hydrogeology of the sacred Gihon Spring, Jerusalem: a deteriorating urban karst spring

    Science.gov (United States)

    Amiel, Ronit Benami; Grodek, Tamir; Frumkin, Amos

    2010-09-01

    The Gihon Spring, Jerusalem, is important for the major monotheistic religions. Its hydrogeology and hydrochemistry is studied here in order to understand urbanization effects on karst groundwater resources, and promote better water management. High-resolution monitoring of the spring discharge, temperature and electrical conductivity, was performed, together with chemical and bacterial analysis. All these demonstrate a rapid response of the spring to rainfall events and human impact. A complex karst system is inferred, including conduit flow, fissure flow and diffuse flow. Electrical conductivity, Na+ and K+ values (2.0 mS/cm, 130 and 50 mg/l respectively) are very high compared to other nearby springs located at the town margins (0.6 mS/cm, 15 and <1 mg/l respectively), indicating considerable urban pollution in the Gihon area. The previously cited pulsating nature of the spring was not detected during the present high-resolution monitoring. This phenomenon may have ceased due to additional water sources from urban leakage and irrigation feeding the spring. The urbanization of the recharge catchment thus affects the spring water dramatically, both chemically and hydrologically. Appropriate measures should therefore be undertaken to protect the Gihon Spring and other karst aquifers threatened by rapid urbanization.

  14. Staff meeting

    CERN Multimedia

    2007-01-01

    Dear Colleagues, 2007 is a very special year for CERN. I would like to review the status of our activities with you, and I invite you to a presentation on Wednesday 27 June 2007 at 3:00 p.m. Main Auditorium (bldg. 500) Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). Simultaneous translation into English will be available in the Main Auditorium. Robert AYMAR

  15. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

      MARS 2015 FIVE YEARLY REVIEW CONTRACT POLICY PENSION FUND GENERAL INFORMATION   COME AND BE INFORMED! PUBLIC MEETINGS Friday 3rd October at 10 am Amphi BE, 864-1-D02 Prévessin Friday 3rd October at 2 pm Salle du Conseil / Council Chamber, 503-1-001 (in English) Meyrin Monday 6th October at 10 am Kjell Johnsen Auditorium, 30-7-018 Meyrin Monday 6th October at 2 pm Salle du Conseil / Council Chamber, 503-1-001 Meyrin  

  16. Molecular biology of Homo sapiens: Abstracts of papers presented at the 51st Cold Spring Harbor symposium on quantitative biology

    International Nuclear Information System (INIS)

    Watson, J.D.; Siniscalco, M.

    1986-01-01

    This volume contains abstracts of papers presented at the 51st Cold Springs Harbor Symposium on Quantitative Biology. The topic for this meeting was the ''Molecular Biology of Homo sapiens.'' Sessions were entitled Human Gene Map, Human Cancer Genes, Genetic Diagnosis, Human Evolution, Drugs Made Off Human Genes, Receptors, and Gene Therapy. (DT)

  17. Molecular biology of Homo sapiens: Abstracts of papers presented at the 51st Cold Spring Harbor symposium on quantitative biology

    Energy Technology Data Exchange (ETDEWEB)

    Watson, J.D.; Siniscalco, M.

    1986-01-01

    This volume contains abstracts of papers presented at the 51st Cold Springs Harbor Symposium on Quantitative Biology. The topic for this meeting was the ''Molecular Biology of Homo sapiens.'' Sessions were entitled Human Gene Map, Human Cancer Genes, Genetic Diagnosis, Human Evolution, Drugs Made Off Human Genes, Receptors, and Gene Therapy. (DT)

  18. Quarry geotechnical report for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-11-01

    This report has been prepared for the United States Department of Energy's (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) by the Project Management Contractor (PMC), which is MK-Ferguson Company (MK-Ferguson) with Jacobs Engineering Group (JEG) as its designated subcontractor. The Weldon Spring site (WSS) comprises the Weldon Spring quarry area and the Weldon Spring chemical plant and raffinate pit areas. This report presents the results of geotechnical investigations conducted during 1989--1990 at the proposed Weldon Spring quarry staging and water treatment facilities in the quarry area. The facilities are intended for treatment of water removed from the quarry area. An access road and a decontamination pad will be necessary for handling and transportation of bulk waste. Results of previous geotechnical investigations performed by other geoscience and environmental engineering firms in the quarry area, were reviewed, summarized and incorporated into this report. Well logging, stratigraphy data, piezometer data, elevations, and soil characteristics are also included

  19. Prediction of Spring Rate and Initial Failure Load due to Material Properties of Composite Leaf Spring

    International Nuclear Information System (INIS)

    Oh, Sung Ha; Choi, Bok Lok

    2014-01-01

    This paper presented analysis methods for adapting E-glass fiber/epoxy composite (GFRP) materials to an automotive leaf spring. It focused on the static behaviors of the leaf spring due to the material composition and its fiber orientation. The material properties of the GFRP composite were directly measured based on the ASTM standard test. A reverse implementation was performed to obtain the complete set of in-situ fiber and matrix properties from the ply test results. Next, the spring rates of the composite leaf spring were examined according to the variation of material parameters such as the fiber angles and resin contents of the composite material. Finally, progressive failure analysis was conducted to identify the initial failure load by means of an elastic stress analysis and specific damage criteria. As a result, it was found that damage first occurred along the edge of the leaf spring owing to the shear stresses

  20. Manufacture of conical springs with elastic medium technology improvement

    Science.gov (United States)

    Kurguzov, S. A.; Mikhailova, U. V.; Kalugina, O. B.

    2018-01-01

    This article considers the manufacturing technology improvement by using an elastic medium in the stamping tool forming space to improve the conical springs performance characteristics and reduce the costs of their production. Estimation technique of disk spring operational properties is developed by mathematical modeling of the compression process during the operation of a spring. A technique for optimizing the design parameters of a conical spring is developed, which ensures a minimum voltage value when operated in the edge of the spring opening.

  1. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meetingto be held on Wednesday 3 December 2008 at 9:15 a.m.in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Va...

  2. Archaeal diversity in Icelandic hot springs

    DEFF Research Database (Denmark)

    Kvist, Thomas; Ahring, Birgitte Kiær; Westermann, Peter

    2007-01-01

    Whole-cell density gradient extractions from three solfataras (pH 2.5) ranging in temperature from 81 to 90 degrees C and one neutral hot spring (81 degrees C, pH 7) from the thermal active area of Hveragerethi (Iceland) were analysed for genetic diversity and local geographical variation...... of Archaea by analysis of amplified 16S rRNA genes. In addition to the three solfataras and the neutral hot spring, 10 soil samples in transects of the soil adjacent to the solfataras were analysed using terminal restriction fragment length polymorphism (t-RFLP). The sequence data from the clone libraries...... enzymes AluI and BsuRI. The sequenced clones from this solfatara belonged to Sulfolobales, Thermoproteales or were most closest related to sequences from uncultured Archaea. Sequences related to group I.1b were not found in the neutral hot spring or the hyperthermophilic solfatara (90 degrees C)....

  3. Use of SPring-8 in drug development

    International Nuclear Information System (INIS)

    Nishijima, Kazumi

    2006-01-01

    Protein structure analysis consortium was established by 21 drug companies and has analyzed protein structures using the beam line BL32B2 of SPring-8 since September in 2002. Outline of the protein structure analysis consortium, contribution of SPring-8 to drug development, and the present status and future of use of SPring-8 are stated. For examples of structure analysis, the human nuclear enzyme (PARP-1) fragment complex crystal structure, human ISG20, human dipeptidine peptidase IV, human cMDH, chromatin binding human nuclear enzyme complex, change of structure of each step of tyrosine activation of bacteria tyrosine tRNA synthetase are described. Contribution of analysis of protein structure and functions to drug development, development process of new drug, drug screening using compounds database on the basis of the three dimensional structure of receptor active site, genome drug development, and the effects of a target drug on the market are explained. (S.Y.)

  4. Nonlinear Squeeze Film Dampers without Centralized Springs

    Directory of Open Access Journals (Sweden)

    Zhu Changsheng

    2000-01-01

    Full Text Available In this paper, the bifurcation behavior of a flexible rotor supported on nonlinear squeeze film dampers without centralized springs is analyzed numerically by means of rotor trajectories, Poincar maps, bifurcation diagrams and power spectra, based on the short bearing and cavitated film assumptions. It is shown that there also exist two different operations (i.e., socalled bistable operations in some speed regions in the rotor system supported on the nonlinear squeeze film dampers without centralized springs. In the bistable operation speed regions, the rotor system exhibits synchronous, sub-synchronous, sub-super-synchronous and almost-periodic as well as nonperiodic motions. The periodic bifurcation behaviors of the rotor system supported on nonlinear squeeze film dampers without centralized springs are very complex and require further investigations.

  5. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1980-01-01

    An improved and novel grid spacer was developed for use in nuclear reactor fuel assemblies. It is comprised of a series of intersecting support strips and a peripheral support band attached to the ends of the support strips. Each of the openings into which the fuel element is inserted has a number of protruding dimples and springs extending in different directions. The dimples coact with the springs to secure the fuel rods in the openings. Compared with previous designs, this design gives more positive alignment of the support stips while allowing greater flexibility to counterbalance the effects of thermal expansion. The springs are arranged in alternating directions so that the reaction forces tend to counterbalance each other, which in turn minimizes the reaction loads on the supporting structure. (D.N.)

  6. Hydrogeological characterization of peculiar Apenninic springs

    Science.gov (United States)

    Cervi, F.; Marcaccio, M.; Petronici, F.; Borgatti, L.

    2014-09-01

    In the northern Apennines of Italy, springs are quite widespread over the slopes. Due to the outcropping of low-permeability geologic units, they are generally characterized by low-yield capacities and high discharge variability during the hydrologic year. In addition, low-flow periods (discharge lower than 1 Ls-1) reflect rainfall and snowmelt distribution and generally occur in summer seasons. These features strongly condition the management for water-supply purposes, making it particularly complex. The "Mulino delle Vene" springs (420 m a.s.l., Reggio Emilia Province, Italy) are one of the largest in the Apennines for mean annual discharge and dynamic storage and are considered as the main water resource in the area. They flow out from several joints and fractures at the bottom of an arenite rock mass outcrop in the vicinity of the Tresinaro River. To date, these springs have not yet been exploited, as the knowledge about the hydrogeological characteristics of the aquifer and their hydrological behaviour is not fully achieved. This study aims to describe the recharge processes and to define the hydrogeological boundaries of the aquifer. It is based on river and spring discharge monitoring and groundwater balance assessment carried out during the period 2012-2013. Results confirm the effectiveness of the approach, as it allowed the total aliquot of discharge of the springs to be assessed. Moreover, by comparing the observed discharge volume with the one calculated with the groundwater balance, the aquifer has been identified with the arenite slab (mean altitude of 580 m a.s.l.), extended about 5.5 km2 and located 1 km west of the monitored springs.

  7. Spring and Its Global Echo: Quantitative Analysis

    Directory of Open Access Journals (Sweden)

    A. V. Korotayev

    2017-01-01

    Full Text Available It is shown that the Arab Spring acted as a trigger for a global wave of socio-political destabilization, which signifi cantly exceeded the scale of the Arab Spring itself and affected absolutely all world-system zones. Only in 2011 the growth of the global number of largescale anti-government demonstrations, riots and political strikes was to a high degree (although not entirely due to their growth in the Arab world. In the ensuing years, the Arab countries rather made a negative contribution to a very noticeable further increase in the global number of large-scale anti-government demonstrations, riots and general strikes (the global intensity of all these three important types of socio-political destabilization continued to grow despite the decline in the Arab world. Thus, for all these three important indicators of sociopolitical destabilization, the scale of the global echo of the Arab Spring has overshadowed the scale of the Arab Spring itself. Only as regards the fourth considered indicator (major terrorist attacks / guerrilla warfare the scale of the global echo for the entire period considered did not overshadow the scale of the Arab Spring (and, incidentally, «Winter» - and in 2014-2015 Arab countries continued to make a disproportionate contribution to the historically record global values of this sad indicator – global number of major terrorist attacks/ guerilla warfare. To conclude, triggered by the Arab Spring, the global wave of socio-political destabilization led after 2010 to a very signifi cant growth of socio-political instability in absolutely all World System zones. However, this global destabilization wave manifested itself in different World System zones in different ways and not completely synchronously.

  8. Integrated geophysical investigations of Main Barton Springs, Austin, Texas, USA

    Science.gov (United States)

    Saribudak, By Mustafa; Hauwert, Nico M.

    2017-03-01

    Barton Springs is a major discharge site for the Barton Springs Segment of the Edwards Aquifer and is located in Zilker Park, Austin, Texas. Barton Springs actually consists of at least four springs. The Main Barton Springs discharges into the Barton Springs pool from the Barton Springs fault and several outlets along a fault, from a cave, several fissures, and gravel-filled solution cavities on the floor of the pool west of the fault. Surface geophysical surveys [resistivity imaging, induced polarization (IP), self-potential (SP), seismic refraction, and ground penetrating radar (GPR)] were performed across the Barton Springs fault and at the vicinity of the Main Barton Springs in south Zilker Park. The purpose of the surveys was two-fold: 1) locate the precise location of submerged conduits (caves, voids) carrying flow to Main Barton Springs; and 2) characterize the geophysical signatures of the fault crossing Barton Springs pool. Geophysical results indicate significant anomalies to the south of the Barton Springs pool. A majority of these anomalies indicate a fault-like pattern, in front of the south entrance to the swimming pool. In addition, resistivity and SP results, in particular, suggest the presence of a large conduit in the southern part of Barton Springs pool. The groundwater flow-path to the Main Barton Springs could follow the locations of those resistivity and SP anomalies along the newly discovered fault, instead of along the Barton Springs fault, as previously thought.

  9. Rapid River Hatchery - Spring Chinook, Final Report

    International Nuclear Information System (INIS)

    Watson, M.

    1996-05-01

    This report presents the findings of the independent audit of the Rapid River Hatchery (Spring Chinook). The hatchery is located in the lower Snake River basin near Riggins Idaho. The hatchery is used for adult collection, egg incubation, and rearing of spring chinook. The audit was conducted in April 1996 as part of a two-year effort that will include 67 hatcheries and satellite facilities located on the Columbia and Snake River system in Idaho, Oregon, and Washington. The hatchery operating agencies include the US Fish and Wildlife Service, Idaho Department of Fish and Game, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife

  10. Fuel column retainer using radially compressed spring

    International Nuclear Information System (INIS)

    Johansson, E.B.

    1989-01-01

    This patent describes a fuel rod construction including a fuel rod having an inside cylindrical diameter, cylindrical fuel pellets placed within the rod. The cylindrical fuel pellets having a diameter less than the inside cylindrical diameter and being stacked end to end for a distance less than the length of the fuel rod inside the fuel rod; Zircaloy end plugs for sealing the rod at either end; a compression spring adjacent one end of the rods for biasing the pellets to and towards the other end of the rod. An improvement in the Zircaloy spring is described

  11. Meeting Venus

    Science.gov (United States)

    Sterken, Christiaan; Aspaas, Per Pippin

    2013-06-01

    On 2-3 June 2012, the University of Tromsoe hosted a conference about the cultural and scientific history of the transits of Venus. The conference took place in Tromsoe for two very specific reasons. First and foremost, the last transit of Venus of this century lent itself to be observed on the disc of the Midnight Sun in this part of Europe during the night of 5 to 6 June 2012. Second, several Venus transit expeditions in this region were central in the global enterprise of measuring the scale of the solar system in the eighteenth century. The site of the conference was the Nordnorsk Vitensenter (Science Centre of Northern Norway), which is located at the campus of the University of Tromsoe. After the conference, participants were invited to either stay in Tromsoe until the midnight of 5-6 June, or take part in a Venus transit voyage in Finnmark, during which the historical sites Vardoe, Hammerfest, and the North Cape were to be visited. The post-conference program culminated with the participants observing the transit of Venus in or near Tromsoe, Vardoe and even from a plane near Alta. These Proceedings contain a selection of the lectures delivered on 2-3 June 2012, and also a narrative description of the transit viewing from Tromsoe, Vardoe and Alta. The title of the book, Meeting Venus, refers the title of a play by the Hungarian film director, screenwriter and opera director Istvan Szabo (1938-). The autobiographical movie Meeting Venus (1991) directed by him is based on his experience directing Tannhauser at the Paris Opera in 1984. The movie brings the story of an imaginary international opera company that encounters a never ending series of difficulties and pitfalls that symbolise the challenges of any multicultural and international endeavour. As is evident from the many papers presented in this book, Meeting Venus not only contains the epic tales of the transits of the seventeenth, eighteenth and nineteenth centuries, it also covers the conference

  12. The annual ASCI meeting: does nostalgia have a future?

    Science.gov (United States)

    Lefkowitz, Robert J

    2008-04-01

    For many academic physician-scientists, the yearly Tri-Societies meeting of the ASCI, AAP, and AFCR during the 1960s, '70s, and '80s was an annual rite of spring and the focal point of the academic year. In this brief essay, I set down some miscellaneous recollections of these meetings and some thoughts about why they were of such central importance in the careers of those of my generation.

  13. Public meetings

    CERN Multimedia

    Staff Association

    2013-01-01

    MARS SURVEY 5YR 2015 GENERAL INFORMATION ELECTIONS 2013   COME AND BE INFORMED! Public meetings Tuesday 1st Oct. 10 am Amphi IT, 31-3-004 Meyrin Tuesday 1st Oct. 2 pm Council Chamber, 503-1-001 Meyrin Friday 4 Oct. 10 am Amphi BE, 864-1-D02 Prévessin Monday 7 Oct. 2 pm Council Chamber, 503-1-001 (in English) Meyrin Tuesday 8 Oct. 10 am Amphi Kjell Johnsen, 30-7-018 Meyrin   Overview of the topics to be discussed Recognition of Merit – MARS Outcome of last exercise 2007 to 2013: lessons learned Survey: five-yearly review, give us your opinion General information CVI 2014 Voluntary programmes (PRP, SLS) Elections 2013 Renewal of the Staff Council 2014 - 2015  

  14. Meetings and Meeting Modeling in Smart Environments

    NARCIS (Netherlands)

    Nijholt, Antinus; op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.

    In this paper we survey our research on smart meeting rooms and its relevance for augmented reality meeting support and virtual reality generation of meetings in real time or off-line. The research reported here forms part of the European 5th and 6th framework programme projects multi-modal meeting

  15. Meetings and meeting modeling in smart surroundings

    NARCIS (Netherlands)

    op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.; Nijholt, Antinus; Nishida, T.

    2004-01-01

    In this paper we survey our research on smart meeting rooms and its relevance for augmented reality meeting support and virtual reality generation of meetings in real-time or off-line. Intelligent real-time and off-line generation requires understanding of what is going on during a meeting. The

  16. Hydrogeochemical And Isotopic Investigation Of Nasrettin Hoca Springs, Eskisehir, Turkey

    Directory of Open Access Journals (Sweden)

    Mehmet ÇELİK

    2013-06-01

    Full Text Available The aims of this study are to investigate the water quality, the contamination and water-rock interaction of the Nasrettin Hoca springs, with an ultimate aim of establishing protection measures. Within the scope of this study, the springs in and around the catchment area, Bağbaşı springs, Hatip spring, Ali spring, Saracık Fountain and Babadat spring, were investigated. The springs are of Ca-Mg-HCO3 type when basic hydrogeochemical features are considered, are under the influence of marble-limestone and meta ophiolitic units located in the recharge area and are of shallow circulation. The trace element contents of the springs show the influence of the carbonate rocks comprising the reservoir (Sr and the basement rocks (Ni, Al. The protection areas of Nasrettin Hoca springs against contamination are determined as three different zones by considering the hydrogeologic and topographical features of the region and the Turkish Standards

  17. Standards, Assessments & Opting Out, Spring 2015

    Science.gov (United States)

    Advance Illinois, 2015

    2015-01-01

    In the spring, Illinois students will take new state assessments that reflect the rigor and relevance of the new Illinois Learning Standards. But some classmates will sit out and join the pushback against standardized testing. Opt-out advocates raise concerns about over-testing, and the resulting toll on students as well as the impact on classroom…

  18. Registration of 'Prevail' hard red spring wheat

    Science.gov (United States)

    Grower and end-user acceptance of new Hard Red Spring Wheat (HRSW; Triticum aestivum L.) cultivars is largely contingent upon satisfactory agronomic performance, end-use quality potential, and disease resistance levels. Additional characteristics, such as desirable plant height, can also contribute...

  19. Nonlinear Study of Industrial Arc Spring Dampers

    DEFF Research Database (Denmark)

    Lahriri, Said; Santos, Ilmar; Hartmann, Henning

    2011-01-01

    acting on the SFD are presented. It is worth mentioning, that the maps and diagrams can be used as design guidance. Finally, a comparison between the numerical results and experimental result is facilitated in form of waterfall diagrams. For this, a full scale model of the arc-spring damper was designed...

  20. Tried and True: Springing into Linear Models

    Science.gov (United States)

    Darling, Gerald

    2012-01-01

    In eighth grade, students usually learn about forces in science class and linear relationships in math class, crucial topics that form the foundation for further study in science and engineering. An activity that links these two fundamental concepts involves measuring the distance a spring stretches as a function of how much weight is suspended…

  1. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1980-01-01

    An improved and novel grid spacer for maintaining the fuel rods of a nuclear reactor fuel assembly in substantially parallel array is described. The invention provides for spring strips to maintain the fuel elements in their desired orientation which have more positive alignment than previous types while allowing greater flexibility to counterbalance the effects of differential thermal expansion. (UK)

  2. Joint Force Quarterly. Number 18, Spring 1998

    Science.gov (United States)

    1998-06-01

    our arms.” JFQ ■ O F F T H E S H E L F 142 JFQ / Spring 1998 Colonel Harry G. Summers, Jr., USA (Ret.), is a syndicated columnist and noted lecturer...a syndicate leader at a German staff college is considered a high-prestige post that usually presages promo- tion to flag rank. Two other foreign

  3. Manomaterials research activities at the SPring-8

    International Nuclear Information System (INIS)

    Kimura, Sigeru; Kobayashi, Keisuke

    2005-01-01

    The Ministry of Education, Culture, Sports, Science and Technology, Japan started the 'Nanotechnology Support Project' from 2002 for the purpose to support nanotechnology researches. As part of the nanotechnology support project, SPring-8 has supported nanotechnology researches using synchrotron radiation. In this article, some research activities of the project are introduced. (author)

  4. Magnetically Coupled Magnet-Spring Oscillators

    Science.gov (United States)

    Donoso, G.; Ladera, C. L.; Martin, P.

    2010-01-01

    A system of two magnets hung from two vertical springs and oscillating in the hollows of a pair of coils connected in series is a new, interesting and useful example of coupled oscillators. The electromagnetically coupled oscillations of these oscillators are experimentally and theoretically studied. Its coupling is electromagnetic instead of…

  5. The Silent Spring of Rachel Carson.

    Science.gov (United States)

    Kerstetter, Ned

    1996-01-01

    Presents a lesson plan examining Rachel Carson's call to arms concerning the harmful consequences of pesticides. Students view a video documentary on Carson's work and read a synopsis of her book, "Silent Spring." Assessment is provided by various activities including writing assignments, creating posters, and editorial cartoons. (MJP)

  6. Tool Releases Optical Elements From Spring Brackets

    Science.gov (United States)

    Gum, J. S.

    1984-01-01

    Threaded hooks retract bracket arms holding element. Tool uses three hooks with threaded shanks mounted in ring-shaped holder to pull on tabs to release optical element. One person can easily insert or remove optical element (such as prism or lens) from spring holder or bracket with minimal risk of damage.

  7. [History of hot spring bath treatment in China].

    Science.gov (United States)

    Hao, Wanpeng; Wang, Xiaojun; Xiang, Yinghong; Gu Li, A Man; Li, Ming; Zhang, Xin

    2011-07-01

    As early as the 7th century B.C. (Western Zhou Dynasty), there is a recording as 'spring which contains sulfur could treat disease' on the Wentang Stele written by WANG Bao. Wenquan Fu written by ZHANG Heng in the Easten Han Dynasty also mentioned hot spring bath treatment. The distribution of hot springs in China has been summarized by LI Daoyuan in the Northern Wei Dynasty in his Shuijingzhu which recorded hot springs in 41 places and interpreted the definition of hot spring. Bencao Shiyi (by CHEN Cangqi, Tang Dynasty) discussed the formation of and indications for hot springs. HU Zai in the Song Dynasty pointed out distinguishing hot springs according to water quality in his book Yuyin Conghua. TANG Shenwei in the Song Dynasty noted in Jingshi Zhenglei Beiji Bencao that hot spring bath treatment should be combined with diet. Shiwu Bencao (Ming Dynasty) classified hot springs into sulfur springs, arsenicum springs, cinnabar springs, aluminite springs, etc. and pointed out their individual indications. Geologists did not start the work on distribution and water quality analysis of hot springs until the first half of the 20th century. There are 972 hot springs in Wenquan Jiyao (written by geologist ZHANG Hongzhao and published in 1956). In July 1982, the First National Geothermal Conference was held and it reported that there were more than 2600 hot springs in China. Since the second half of the 20th century, hot spring sanatoriums and rehabilitation centers have been established, which promoted the development of hot spring bath treatment.

  8. Public meeting

    CERN Multimedia

    Staff Association

    2015-01-01

    Last Monday at 9 a.m. the Council Chamber was full, with several people standing, for the public meeting of the Staff Association. Simultaneously, many of our colleagues followed the presentations in the Amphitheatre in Prévessin. We would like to thank all of you for the interest you have shown and for your feedback. In the introduction we explained how the Staff Association represents the staff in its discussions with Management and Member States, and how the staff itself defined, by its participation in the 2013 staff survey, the priority assigned to various points related to the employment conditions. The position of the Staff Association regarding the new contract policy, to be implemented as of 31 March 2015 after approval by Council, was stated. Then, in the framework of the 2015 five-yearly review, the general approach that we would like to see for the new career structure, was explained. Concerning diversity, based on what we know about the situation in other international organiza...

  9. Fruitful meeting

    CERN Multimedia

    Mike Lamont

    2010-01-01

    The annual meeting for the LHC Performance Workshop was held in Chamonix from 25 to 29 January 2010 in the Centre de Congrès Le Majestic. The Workshop focused on how to reach the maximum operating energy.   The LHC Performance Workshop took place between 25 and 29 January 2010 in a rather chilly Chamonix. Following the successful start of beam commissioning last year, there remain a number of important questions about the near future of the machine. Topics discussed included the maximum operational energy that will be possible in 2010 and the steps need to go above the planned 2010 start-up energy of 3.5 TeV. Of particular importance were the required splice and magnet consolidation measures that would be demanded by an increase above this energy.  The energy in the magnets and beams will always represent a considerable threat, and the possible impact of an incident and the potential measures required to speed up a recovery were put on the table. Safety is critical and there were...

  10. A springs actuated finger exoskeleton: From mechanical design to spring variables evaluation.

    Science.gov (United States)

    Bortoletto, Roberto; Mello, Ashley N; Piovesan, Davide

    2017-07-01

    In the context of post-stroke patients, suffering of hemiparesis of the hand, robot-aided neuro-motor rehabilitation allows for intensive rehabilitation treatments and quantitative evaluation of patients' progresses. This work presents the design and evaluation of a spring actuated finger exoskeleton. In particular, the spring variables and the interaction forces between the assembly and the hand were investigated, in order to assess the effectiveness of the proposed exoskeleton.

  11. Summary of Needs and Opportunities from the 2011 Residential Energy Efficiency Stakeholders Meeting: Atlanta, Georgia -- March 16-18, 2011

    Energy Technology Data Exchange (ETDEWEB)

    2011-05-01

    This summary report outlines needs and issues for increasing energy efficiency of new and existing U.S homes, as identified at the U.S Department of Energy Building America program Spring 2011 stakeholder meeting in Atlanta, Georgia.

  12. Simulated effects of increased groundwater withdrawals in the Cave Springs area, Hixson, Tennessee

    Science.gov (United States)

    Haugh, Connor J.

    2014-01-01

    Concern for future water supplies in Tennessee has grown in recent years as a result of increased awareness of competing needs, the impact of droughts, and the need for more water to support growing populations. The U.S. Geological Survey conducts investigations to improve the knowledge about interactions of geology, climate, humans, and ecosystems with the water cycle, which is critical to understanding and optimizing water availability. The Hixson Utility District in Hamilton County, Tennessee, uses groundwater resources in the Cave Springs area as a water supply, withdrawing water from two well fields located at Cave Springs and Walkers Corner. Historically, Hixson Utility District has withdrawn about 5 million gallons per day (Mgal/d) at the Cave Springs well field and between 2 and 3 Mgal/d at the Walkers Corner well field. To assess the capacity of the groundwater resources in the Cave Springs area to meet future demands, four different scenarios of increased groundwater withdrawals were analyzed using computer model simulations.

  13. Springing response due to bidirectional wave excitation

    DEFF Research Database (Denmark)

    Vidic-Perunovic, Jelena

    2005-01-01

    theories deal with the unidirectional wave excitation. This is quite standard. The problem is how to include more than one directional wave systems described by a wave spectrum with arbitrary heading. The main objective of the present work has been to account for the additional second-order springing......-linear (second order) high frequency springing analyses with unidirectional wave excitation are much more scattered. Some of the reasons are different level of wave excitation accounted in the different Executive Summary ivtheories, inclusion of additional hydrodynamic phenomena e.g. slamming in the time...... because, to the author's knowledge, this is the first time that the wave data were collected simultaneously with stress records on the deck of the ship. This is highly appreciated because one can use the precise input and not only the most probable sea state statistics. The actual picture of the sea waves...

  14. SPRING BARLEY BREEDING FOR MALTING QUALITY

    Directory of Open Access Journals (Sweden)

    Alžbeta Žofajová

    2010-05-01

    Full Text Available The aim of this contribution is to illustrate the results of spring barley breeding for malting quality and point out an important position of variety in production of  qualitative  raw material for maltinq and beer  industry as well as the system of evaluation the qualitative parameters of breeding materials and adaptation of barley breeding programms to the  new requirements of  malting and beer industry. As an example of the results obtained most recently description is made of the Ezer, Levan, Donaris, Sladar spring barley varieties with very good malting quality and effective resistance to  powdery mildew.  Cultivation of these varieties  and malting barley production with  reduced use  of pesticidies is environmentally friedly alternative. doi:10.5219/50

  15. Modelling Flat Spring performance using FEA

    International Nuclear Information System (INIS)

    Fatola, B O; Keogh, P; Hicks, B

    2009-01-01

    This paper reports how the stiffness of a Flat Spring can be predicted using nonlinear Finite Element Analysis (FEA). The analysis of a Flat Spring is a nonlinear problem involving contact mechanics, geometric nonlinearity and material property nonlinearity. Research has been focused on improving the accuracy of the model by identifying and exploring the significant assumptions contributing to errors. This paper presents results from some of the models developed using FEA software. The validation process is shown to identify where improvements can be made to the model assumptions to increase the accuracy of prediction. The goal is to achieve an accuracy level of ±10 % as the intention is to replace practical testing with FEA modelling, thereby reducing the product development time and cost. Results from the FEA models are compared with experimental results to validate the accuracy.

  16. Fast Times During Spring Breaks: Are Traffic Fatalities Another Consequence?

    OpenAIRE

    French, Michael; Gumus, Gulcin

    2014-01-01

    Every year in the United States, millions of college students travel for spring break, spending billions of dollars. We examine a potential adverse consequence of spring break that has received little attention in the literature - traffic safety. In particular, we estimate the impact of spring break season on fatal passenger vehicle crashes. Using daily county-level longitudinal data on traffic fatalities in popular spring break destinations from 1982-2011, we conduct separate analyses by age...

  17. Joint Force Quarterly. Number 4, Spring 1994

    Science.gov (United States)

    1994-05-01

    Martin J. Peters, Jr. Calvin B. Kelley Art Direction Typography and Design Division Government Printing Office Joint Force Quarterly is published by...within larger organizations. For example, the concept 6 JFQ / Spring 1994 of the combined joint task force for Europe is designed to provide just such...or financial, may be the shared outcome for all parties to future conflicts. The image of war, shaped over centuries, is precise, graphic , and

  18. Using Euler buckling springs for vibration isolation

    CERN Document Server

    Winterflood, J; Blair, D G

    2002-01-01

    Difficulties in obtaining ideal vertical vibration isolation with mechanical springs are identified as being due to the mass of the elastic element which is in turn due to its energy storage requirement. A new technique to minimize this energy is presented - being an Euler column undergoing elastic buckling. The design of a high performance vertical vibration isolation stage based on this technique is presented together with its measured performance.

  19. Using Euler buckling springs for vibration isolation

    International Nuclear Information System (INIS)

    Winterflood, J; Barber, T; Blair, D G

    2002-01-01

    Difficulties in obtaining ideal vertical vibration isolation with mechanical springs are identified as being due to the mass of the elastic element which is in turn due to its energy storage requirement. A new technique to minimize this energy is presented - being an Euler column undergoing elastic buckling. The design of a high performance vertical vibration isolation stage based on this technique is presented together with its measured performance

  20. Recent results from LEPS at SPring-8

    International Nuclear Information System (INIS)

    Nakano, T.

    2004-01-01

    The polarized photon beam at SPring-8 is produced by backward-Compton scattering of laser photons from 8 GeV electrons. The maximum energy of the photon beam is 2.4 GeV which is above the ss-bar production threshold. We report the status of the facility and new results obtained by experiments with this high quality beam. (author)

  1. Estimating Spring Condensation on the Great Lakes

    Science.gov (United States)

    Meyer, A.; Welp, L.

    2017-12-01

    The Laurentian Great Lakes region provides opportunities for shipping, recreation, and consumptive water use to a large part of the United States and Canada. Water levels in the lakes fluctuate yearly, but attempts to model the system are inadequate because the water and energy budgets are still not fully understood. For example, water levels in the Great Lakes experienced a 15-year low period ending in 2013, the recovery of which has been attributed partially to decreased evaporation and increased precipitation and runoff. Unlike precipitation, the exchange of water vapor between the lake and the atmosphere through evaporation or condensation is difficult to measure directly. However, estimates have been constructed using off-shore eddy covariance direct measurements of latent heat fluxes, remote sensing observations, and a small network of monitoring buoys. When the lake surface temperature is colder than air temperature as it is in spring, condensation is larger than evaporation. This is a relatively small component of the net annual water budget of the lakes, but the total amount of condensation may be important for seasonal energy fluxes and atmospheric deposition of pollutants and nutrients to the lakes. Seasonal energy fluxes determine, and are influenced by, ice cover, water and air temperatures, and evaporation in the Great Lakes. We aim to quantify the amount of spring condensation on the Great Lakes using the National Center for Atmospheric Prediction North American Regional Reanalysis (NCEP NARR) Data for Winter 2013 to Spring 2017 and compare the condensation values of spring seasons following high volume, high duration and low volume, low duration ice cover.

  2. School in nature from spring to winter

    OpenAIRE

    MLSOVÁ, Martina

    2012-01-01

    The bachelor's thesis "Outdoor school from spring to winter" deals with the influence of field teaching on the locomotor development of preschool children. Based on specialized literature its theoretical part summarizes the influence of the natural environment on the child's development. It describes the benefits of field teaching, it deals with the term "Outdoor school" nowadays and in the past and with the locomotor development of children. The practical part includes an elaborated yearlong...

  3. Natural Radioactivity of Thermal Springs in Croatia

    International Nuclear Information System (INIS)

    Marovic, G.; Sencar, J.; Cesar, D.

    1998-01-01

    The Republic of Croatia is rich in thermal and mineral springs, which are widely popular for medical therapy, tourism, recreation, rehabilitation and drinking. Considering the popularity of the spas and the habits of our population to use the beneficial effects of these springs it is of interest to estimate the radiation doses received by patients or tourists staying in the spas. In view of this, the Radiation Protection Unit of the Institute for Medical Research and Occupational Health in Zagreb has been engaged in a research programme dealing with the natural radioactivity concentration in the Croatian thermal and mineral waters. The aim of this paper was to estimate total natural radioactivity (Ra, Ra decay) in thermal and mineral waters from the several spas in Croatia. On basis of the obtained data the Ra and Ra activity ratio was calculated for each investigated spa. In this study possible effects of natural radioactivity were determined for each radionuclide using a derived concentration (DC) for a group of individuals for municipal drinking water supplies. Values exceeding DC represent radionuclide concentrations for radioactive waste. Total percentage ratio for each spring was also calculated. Since natural radioactivity in some spas exceeds DC value the practise of using these waters should be regularly estimated and monitored in order to avoid any possible health effects. (author)

  4. Microbiology of Kamchatka Peninsula Hot Springs

    Science.gov (United States)

    Bonch-Osmolovsk, E.

    2005-12-01

    Hot springs of Uzon Caldera, Geyser Valley, Moutnovsky Volcano (Kamchatka Peninsula) served as the sources of isolation of numerous thermophilic prokaryotes, many of them representing new taxa. Among new isolates there were hyperthermophilic archaea - neutrophilic or acidophilic anaerobic organotrophs, able to use a wide range of polymeric organic substrates. Bacterial isolates were in majority represented by moderate thermophiles - organotrophs and lithoautotrophs. Latter group consisted of anaerobes oxidizing molecular hydrogen in the course of sulfate, sulfur or iron reduction, and of anaerobic CO-oxidizing, hydrogen-producing bacteria. Some of new isolates represented deep phylogenetic lineages in Bacteria domain. Microbial activity in Kamchatka hot springs was studied by means of radioisotopic tracing. The rates of methanogenesis, acetogenesis, inorganic carbon assimilation, acetate oxidation were determined in three different hot springs with pH ranging from 3.0 to 8.5 and water temeperature being in the range from 55 to 85oC. The results indicated the presence and activity of novel metabolic groups of thermophilic prokaryotes that so far have not been known in laboratory cultures.

  5. N Springs expedited response action proposal

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Since signing the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) in 1989, the parties to the agreement have recognized the need to modify the approach to conducting investigations, studies, and cleanup actions at Hanford. To implement this approach, the parties have jointly developed the Hanford Past-Practice Strategy. The strategy defines a non-time-critical expedited response action (ERA) as a response action ``needed to abate a threat to human health or welfare or the environment where sufficient time exists for formal planning prior to initiation of response. In accordance with the past-practice strategy, DOE proposes to conduct an ERA at the N Springs, located in the Hanford 100 N Area, to substantially reduce the strontium-90 transport into the river through the groundwater pathway. The purpose of this ERA proposal is to provide sufficient information to select a preferred alternative at N Springs. The nature of an ERA requires that alternatives developed for the ERA be field ready; therefore, all the technologies proposed for the ERA should be capable of addressing the circumstances at N Springs. A comparison of these alternatives is made based on protectiveness, cost, technical feasibility, and institutional considerations to arrive at a preferred alternative. Following the selection of an alternative, a design phase will be conducted; the design phase will include a detailed look at design parameters, performance specifications, and costs of the selected alternative. Testing will be conducted as required to generate design data.

  6. Rain-induced spring wheat harvest losses

    Science.gov (United States)

    Bauer, A.; Black, A. L. (Principal Investigator)

    1983-01-01

    When rain or a combination of rain and high humidity delay wheat harvest, losses can occur in grain yield and/or grain quality. Yield losses can result from shattering, from reduction in test weight, and in the case of windrowed grain, from rooting of sprouting grain at the soil: windrow contact. Losses in grain quality can result from reduction in test weight and from sprouting. Sprouting causes a degradation of grain proteins and starches, hence flour quality is reduced, and the grain price deteriorates to the value of feed grain. Although losses in grain yield and quality are rain-induced, these losses do not necessarily occur because a standing or windrowed crop is wetted by rain. Spike water concentration in hard red spring wheat must be increased to about 45-49% before sprouting is initiated in grain that has overcome dormancy. The time required to overcome this dormancy after the cultivar has dried to 12 to 14% water concentration differs with hard red spring cultivars. The effect of rain on threshing-ready standing and windrowed hard red spring wheat grain yeild and quality was evaluated. A goal was to develop the capability to forecast the extent of expected loss of grain yield and quality from specific climatic events that delay threshing.

  7. Phenological changes in bamboo carbohydrates explain the preference for culm over leaves by giant pandas (Ailuropoda melanoleuca during spring.

    Directory of Open Access Journals (Sweden)

    Katrina K Knott

    Full Text Available Seasonal changes in the foodscape force herbivores to select different plant species or plant parts to meet nutritional requirements. We examined whether the search for calorie-rich carbohydrates explained giant panda's selection for bamboo culm over leaves during spring. Leaves and culms were collected from four Phyllostachys bamboos (P. aurea, P. aureosulcata, P. glauca, and P. nuda once per month over 18-27 months. Monthly changes in annual plant part nutrients were examined, and compared to seasonal foraging behaviors of captive giant pandas. Although total fiber was greater (p<0.0001 in culm (85.6 ± 0.5% than leaves (55.3 ± 0.4% throughout the year, culm fiber was at its lowest in spring (79-85% when culm selection by giant pandas exceeded 70% of their overall diet. Culm starch also was greatest (p = 0.044 during spring (5.5 ± 1.1% and 2.5-fold the percentage of starch in leaves (2.2 ± 0.6%. The free sugars in spring culm consisted of a high proportion of glucose (35% and fructose (47%, whereas sucrose made up 42% of the total free sugar content of spring leaves. Bound sugars in culm consisted of 60% glucose and 38% xylose likely representative of hemicellulose. The concentrations of bound sugars (hemicelluloses in spring culms (543.7 ± 13.0 mg/g was greater (p<0.001 than in leaves (373.0 ± 14.8 mg/g. These data help explain a long-standing question in giant panda foraging ecology: why consume the plant part with the lowest protein and fat during the energetically intensive spring breeding season? Giant pandas likely prefer spring culm that contains abundant mono- and polysaccharides made more bioavailable as a result of reduced fiber content. These data suggest that phenological changes in bamboo plant part nutrition drive foraging decisions by giant pandas.

  8. Flow-induced vibration of helical coil compression springs

    International Nuclear Information System (INIS)

    Stokes, F.E.; King, R.A.

    1983-01-01

    Helical coil compression springs are used in some nuclear fuel assembly designs to maintain holddown and to accommodate thermal expansion. In the reactor environment, the springs are exposed to flowing water, elevated temperatures and pressures, and irradiation. Flow parallel to the longitudinal axis of the spring may excite the spring coils and cause vibration. The purpose of this investigation was to determine the flow-induced vibration (FIV) response characteristics of the helical coil compression springs. Experimental tests indicate that a helical coil spring responds like a single circular cylinder in cross-flow. Two FIV excitation mechanisms control spring vibration. Namely: 1) Turbulent Buffeting causes small amplitude vibration which increases as a function of velocity squared. 2) Vortex Shedding causes large amplitude vibration when the spring natural frequency and Strouhal frequency coincide. Several methods can be used to reduce or to prevent vortex shedding large amplitude vibrations. One method is compressing the spring to a coil pitch-to-diameter ratio of 2 thereby suppressing the vibration amplitude. Another involves modifying the spring geometry to alter its stiffness and frequency characteristics. These changes result in separation of the natural and Strouhal frequencies. With an understanding of how springs respond in the flowing water environment, the spring physical parameters can be designed to avoid large amplitude vibration. (orig.)

  9. Integrated Field Analyses of Thermal Springs

    Science.gov (United States)

    Shervais, K.; Young, B.; Ponce-Zepeda, M. M.; Rosove, S.

    2011-12-01

    A group of undergraduate researchers through the SURE internship offered by the Southern California Earthquake Center (SCEC) have examined thermal springs in southern Idaho, northern Utah as well as mud volcanoes in the Salton Sea, California. We used an integrated approach to estimate the setting and maximum temperature, including water chemistry, Ipad-based image and data-base management, microbiology, and gas analyses with a modified Giggenbach sampler.All springs were characterized using GISRoam (tmCogent3D). We are performing geothermometry calculations as well as comparisons with temperature gradient data on the results while also analyzing biological samples. Analyses include water temperature, pH, electrical conductivity, and TDS measured in the field. Each sample is sealed and chilled and delivered to a water lab within 12 hours.Temperatures are continuously monitored with the use of Solinst Levelogger Juniors. Through partnership with a local community college geology club, we receive results on a monthly basis and are able to process initial data earlier in order to evaluate data over a longer time span. The springs and mudpots contained microbial organisms which were analyzed using methods of single colony isolation, polymerase chain reaction, and DNA sequencing showing the impact of the organisms on the springs or vice versa. Soon we we will collect gas samples at sites that show signs of gas. This will be taken using a hybrid of the Giggenbach method and our own methods. Drawing gas samples has proven a challenge, however we devised a method to draw out gas samples utilizing the Giggenbach flask, transferring samples to glass blood sample tubes, replacing NaOH in the Giggenbach flask, and evacuating it in the field for multiple samples using a vacuum pump. We also use a floating platform devised to carry and lower a levelogger, to using an in-line fuel filter from a tractor in order to keep mud from contaminating the equipment.The use of raster

  10. Thermal algae in certain radioactive springs in Japan, (3)

    International Nuclear Information System (INIS)

    Mifune, Masaaki; Hirose, Hiroyuki.

    1982-01-01

    Shikano Hot Springs are located at five km to the south of Hamamura Station on the Sanin Line in Tottori Prefecture. The water temperature and the pH of the springs are 40.2 - 61.2 0 C, and 7.5 - 7.8, respectively. They belong to simple thermals. Hamamura Hot Springs are located in the neighbourhood of Hamamura Station. The highest radon content of the hot springs is 175.1 x 10 -10 Ci/l, and the great part of the springs belong to radioactive ones. From the viewpoint of the major ionic constituents, they are also classified under weak salt springs, sulfated salt springs, and simple thermals. Regarding the habitates of the algal flora, the water temperature and the pH of the springs are 28.0 - 68.0 0 C, and 6.8 - 7.4, respectively. The thermal algae found by Ikoma and Doi at Hamamura Hot Springs were two species of Cyanophyceae. By the authors, nine species and one variety of Cyanophyceae including Ikoma and Doi's two species were newly found at Shikano and Hamamura Hot Springs. Chlorophyceous alga was not found. The dominant thermal algae of these hot springs were Mastigocladus laminosus, and the other algae which mainly consist of Oscillatoriaceous algae. From these points, it seems that the thermal algae of Shikano and Hamamura Hot Springs belong to the normal type of thermal algae, and they are different from the thermal algae of Ikeda Mineral Springs and Masutomi Hot Springs which belong to strongly radioactive springs. (author)

  11. Structural analysis of compression helical spring used in suspension system

    Science.gov (United States)

    Jain, Akshat; Misra, Sheelam; Jindal, Arun; Lakhian, Prateek

    2017-07-01

    The main aim of this work has to develop a helical spring for shock absorber used in suspension system which is designed to reduce shock impulse and liberate kinetic energy. In a vehicle, it increases comfort by decreasing amplitude of disturbances and it improves ride quality by absorbing and dissipating energy. When a vehicle is in motion on a road and strikes a bump, spring comes into action quickly. After compression, spring will attempt to come to its equilibrium state which is on level road. Helical springs can be made lighter with more strength by reducing number of coils and increasing the area. In this research work, a helical spring is modeled and analyzed to substitute the existing steel spring which is used in suspension. By using different materials, stress and deflection of helical spring can be varied. Comparability between existing spring and newly replaced spring is used to verify the results. For finding detailed stress distribution, finite element analysis is used to find stresses and deflection in both the helical springs. Finite element analysis is a method which is used to find proximate solutions of a physical problem defined in a finite domain. In this research work, modeling of spring is accomplished using Solid Works and analysis on Ansys.

  12. Top Nozzle Holddown Spring Optimization of KSNP Fuel Assembly

    International Nuclear Information System (INIS)

    Lee, Seong Ki; Park, Nam Kyu; Kim, Hyeong Koo; Lee, Joon Ro; Kim, Jae Won

    2002-01-01

    Nuclear fuel assembly for Korea Standard Nuclear Power (KSNP) Plant has 4 helical compression springs at the upper end of it. The springs, in conjunction with the fuel assembly weight, apply a holddown force against excess of buoyancy forces and the upward hydraulic forces due to the reactor coolant flow. Thus the holddown spring is to be designed such that the positive net downward force will be maintained for all normal and anticipated transient flow and temperature conditions in the nuclear reactor. With satisfying these in-reactor requirements of the fuel assembly holddown spring. Under the assumption that spring density is constant, the volume nozzle holddown spring. Under the assumption that spring density is constant, the volume minimization is executed by using the design variables, viz., wire diameter, mean coil diameter, minimization is executed by using the design variables, viz., wire diameter, mean coil diameter are within the compatible range of the fuel assembly structural components. Based on these conditions, the optimum design of the holddown spring is obtained considering the reactor operating condition and by using ANSYS code. The optimized spring has the properties that are a decreased volume and increased stiffness, compared with the existing one even if the absolute values are very similar each other. The holddown spring design features and the algorithm developed in this study could be directly applicable to the current commercial production. Therefore, it could be used to enhance the design efficiency and the functional performance of the spring, and to reduce a material cost a little

  13. Shape modification for decreasing the spring stiffness of double-plate nozzle type spacer grid spring

    International Nuclear Information System (INIS)

    Lee, K. H.; Kang, H. S.; Song, K. N.; Yun, K. H.; Kim, H. K.

    2001-01-01

    Nozzle of the double-plated grid plays the role of the spirng to support a fuel rod as well as the coolant path in grid. The nozzle was known to be necessary to reduce the spring stiffness for supporting performance. In this study, the contact analysis between the fuel rod and the newly designed nozzle was performed by ABAQUS computer code to propose the preferable shape in term of spring performance. Two small cut at the upper and lower part of the nozzle appeared to have a minor effect in decreasing the nozzle stiffness. A long slot at the center of the nozzle was turned out not only to decrease the spring constant as desired but also to increase the elastic displacement

  14. Characteristics Analysis and Testing of SMA Spring Actuator

    Directory of Open Access Journals (Sweden)

    Jianzuo Ma

    2013-01-01

    Full Text Available The biasing form two-way shape memory alloy (SMA actuator composed of SMA spring and steel spring is analyzed. Based on the force equilibrium equation, the relationship between load capacity of SMA spring and geometric parameters is established. In order to obtain the characteristics of SMA spring actuator, the output force and output displacement of SMA spring under different temperatures are analyzed by the theoretical model and the experimental method. Based on the shape memory effect of SMA, the relationship of the SMA spring actuator's output displacement with the temperature, the stress and strain, the material parameters, and the size parameters is established. The results indicate that the trend of theoretical results is basically consistent with the experimental data. The output displacement of SMA spring actuator is increased with the increasing temperature.

  15. Stiffness and design for strength of trapezoidal Belleville springs

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard; Pedersen, Pauli

    2011-01-01

    in this paper. Finite element results are compared with analytical predictions and critically analysed in terms of the effect of Poisson ratio, overall stiffness, and stress distribution in the spring. This is done in order to verify the range of validity of design standards. Finite element analysis emerges......Belleville springs or coned disc springs are commonly used in machine design. The geometric dimensions of the spring and the determination of non-linear force–displacement curve are regulated by different standards. However, the theory behind Belleville spring design standards is founded on a study...... published in 1936. Furthermore, the common spring design with cross-sections of uniform thickness poses problems in terms of non-uniformity of stress distribution. In view of this, non-linear three-dimensional finite element analyses of spring designs including uniform or variable thickness are carried out...

  16. Northeast Oregon Hatchery Spring Chinook Master Plan, Technical Report 2000.

    Energy Technology Data Exchange (ETDEWEB)

    Ashe, Becky L.; Concannon, Kathleen; Johnson, David B.

    2000-04-01

    Spring chinook salmon populations in the Imnaha and Grande Ronde rivers are listed as threatened under the Endangered Species Act (ESA) and are at high risk of extirpation. The Nez Perce Tribe, the Confederated Tribes of the Umatilla Indian Reservation, and Oregon Department of Fish and Wildlife, are co-managers of conservation/restoration programs for Imnaha and Grande Ronde spring chinook salmon that use hatchery supplementation and conventional and captive broodstock techniques. The immediate goal of these programs is to prevent extirpation and provide the potential for restoration once factors limiting production are addressed. These programs redirect production occurring under the Lower Snake River Compensation Plan (LSRCP) from mitigation to conservation and restoration. Both the Imnaha and Grande Ronde conservation/restoration programs are described in ESA Section 10 permit applications and the co-managers refer to the fish production from these programs as the Currently Permitted Program (CPP). Recently, co-managers have determined that it is impossible to produce the CPP at Lookingglass Hatchery, the LSRCP facility intended for production, and that without additional facilities, production must be cut from these conservation programs. Development of new facilities for these programs through the Columbia Basin Fish and Wildlife Program is considered a new production initiative by the Northwest Power Planning Council (NPPC) and requires a master plan. The master plan provides the NPPC, program proponents and others with the information they need to make sound decisions about whether the proposed facilities to restore salmon populations should move forward to design. This master plan describes alternatives considered to meet the facility needs of the CPP so the conservation program can be fully implemented. Co-managers considered three alternatives: modify Lookingglass Hatchery; use existing facilities elsewhere in the Basin; and use new facilities in

  17. WSSRAP chemical plant geotechnical investigations for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-12-01

    This document has been prepared for the United states Department of Energy (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) by the Project Management Contractor (PMC), which consists of MK-Ferguson Company (MKF) and Morrison Knudsen Corporation Environmental Services Group (MKES) with Jacobs Engineering Group (JEG) as MKF's predesignated subcontractor. This report presents the results of site geotechnical investigations conducted by the PMC in the vicinity of the Weldon Spring chemical plant and raffinate pits (WSCP/RP) and in potential on-site and off-site clayey material borrow sources. The WSCP/RP is the proposed disposal cell (DC) site. 39 refs., 24 figs., 12 tabs

  18. Phototrophy in Mildly Acidic Hot Spring Ecosystems

    Science.gov (United States)

    Fecteau, K.; Boyd, E. S.; Shock, E.

    2014-12-01

    Microbial light-driven reduction of carbon in continental hydrothermal ecosystems is restricted to environments at temperatures less than 73 °C. In circumneutral and alkaline systems bacterial phototrophs (cyanobacteria and anoxygenic phototrophs) are suggested to be principally responsible for this activity whereas algal (i.e., eukaryotic) phototrophs are thought to be responsible for this activity in acidic systems. In Yellowstone National Park numerous examples of phototrophic microbial communities exist at high and low pH, while hot springs with intermediate pH (values 3-5) are rare and commonly dilute. It is thought that the transition from algal photosynthesis to bacterial photosynthesis occurs within this pH range. To test this hypothesis, we sequenced bacterial and eukaryal small subunit ribosomal RNA genes, analyzed pigments, and performed comprehensive geochemical measurements from 12 hot springs within this pH realm. At all sites, the largest phototrophic population was either comprised of Cyanobacteria or affiliated with the algal order Cyanidiales, which are ubiquitous in acidic springs, yet abundant sequences of both lineages were present in 8 of the 12 sites. Nevertheless, some of these samples exceeded the known temperature limit of the algae (56 °C), suggesting that these populations are dead or inactive. Indeed, one site yielded evidence for a large Cyanidiales population as the only phototrophs present, yet an experiment at the time of sampling failed to demonstrate light-driven carbon fixation, and analysis of extracted pigments showed a large amount of the chlorophyll degradation product pheophorbide a and very little intact chlorophyll, indicating photosynthesis occurred at this site when conditions were different. Our observations illustrate the dynamic nature of these systems that may be transiently conducive to photosynthesis, which may open niches for phototrophs of both domains and likely played a role in the evolution of photosynthesis.

  19. Spring-block Model for Barkhausen Noise

    International Nuclear Information System (INIS)

    Kovacs, K.; Brechet, Y.; Neda, Z.

    2005-01-01

    A simple mechanical spring-block model is used for studying Barkhausen noise (BN). The model incorporates the generally accepted physics of domain wall movement and pinning. Computer simulations on this model reproduces the main features of the hysteresis loop and Barkhausen jumps. The statistics of the obtained Barkhausen jumps follows several scaling laws, in qualitative agreement with experimental results. The model consists of a one-dimensional frictional spring-block system. The blocks model the Bloch-walls that separate inversely oriented magnetic domains, and springs correspond to the magnetized regions. Three types of realistic forces are modelled with this system: 1. the force resulting from the magnetic energy of the neighboring domains in external magnetic field (modelled by forces having alternating orientations and acting directly on the blocks); 2. the force resulting from the magnetic self-energy of each domain (modelled by the elastic forces of the springs); 3. the pinning forces acting on the domain walls (modelled by position dependent static friction acting on blocks). The dynamics of the system is governed by searching for equilibrium: one particular domain wall can jump to the next pinning center if the resultant of forces 1. and 2. is greater then the pinning force. The external magnetic field is successively increased (or decreased) and the system is relaxed to mechanical equilibrium. During the simulations we are monitoring the variation of the magnetization focusing on the shape of the hysteresis loop, power spectrum, jump size (avalanche size) distribution, signal duration distribution, signal area distribution. The simulated shape of the hysteresis loops fulfills all the requirements for real magnetization phenomena. The power spectrum indicates different behavior in the low (1/f noise) and high (white noise) frequency region. All the relevant distribution functions show scaling behavior over several decades of magnitude with a naturally

  20. SPRING BARLEY BREEDING FOR MALTING QUALITY

    OpenAIRE

    Alžbeta Žofajová; Jozef Gubiš; Ľudovít Sleziak; Klára Križanová; Vratislav Psota

    2010-01-01

    The aim of this contribution is to illustrate the results of spring barley breeding for malting quality and point out an important position of variety in production of  qualitative  raw material for maltinq and beer  industry as well as the system of evaluation the qualitative parameters of breeding materials and adaptation of barley breeding programms to the  new requirements of  malting and beer industry. As an example of the results obtained most recently descripti...

  1. Novosadski golozrni, a spring oat variety

    Directory of Open Access Journals (Sweden)

    Pržulj Novo

    2001-01-01

    Full Text Available The naked oat variety Novosadski golozrni was developed from a cross between the variety Adam and a spring-type naked oat line from Canada. The variety is early, medium tall, with excellent resistance to lodging. The yield of Novosadski golozrni is 30-40% lower than that of the hulled standard and it is to the largest measure dependent on the interaction variety x year x location. The variety has high contents of proteins and fats (19.2% DM and 6.2% DM, respectively and a low cellulose content (2.8% DM. .

  2. South Atlantic Humanities Center Seminars -- Spring 2004

    OpenAIRE

    Elliott, Jean

    2004-01-01

    The South Atlantic Humanities Center (SAHC) at Virginia Tech is sponsoring several seminars this spring.•À_•À_ SAHC is a partnership of the Virginia Foundation for the Humanities, Virginia Tech, and the University of Virginia.•À_•À_ SAHC focuses on the U.S. South Atlantic from a regional and transatlantic perspective. It explores and preserves the rich heritage of a region stretching from Virginia to the Virgin Islands.•À_•À_ It engages artists and performers, writers and filmmakers, teachers...

  3. Penetrating ocular trauma from trampoline spring.

    Science.gov (United States)

    Spokes, David; Siddiqui, Salina; Vize, Colin

    2010-02-01

    The case is presented of a 12-year old boy who sustained severe penetrating ocular trauma while playing on a domestic trampoline. A main spring broke under tension and the hook had struck the eye at high velocity and penetrated the sclera. Primary repair was undertaken but on review it became apparent the eye could not be salvaged. Evisceration was carried out and an orbital implant was placed. Post-operative cosmesis is acceptable. This type of injury has not been reported before. Adult supervision of children on trampolines is recommended to minimise the chance of serious injury.

  4. The United States and the Arab Spring

    Directory of Open Access Journals (Sweden)

    Timo Kivimäki

    2013-01-01

    Full Text Available This article reveals, by studying correlative relationships between US regime support and regime properties, that the US foreign policy in the Middle East has traditionally helped governments to limit the political participation of Islamists, communists, enemies of Israel and populations that could be hostile to the US oil interests. This way the US economic and strategic security interests have contributed to human insecurity in the region. With the exception of the last interest, the US has relaxed its support for repression of the above-mentioned groups. This seems to be one of the international factors that made the Arab Spring possible.

  5. Getting started with Spring Framework a hands-on guide to begin developing applications using Spring Framework

    CERN Document Server

    Sharma, J

    2016-01-01

    Getting started with Spring Framework is a hands-on guide to begin developing applications using Spring Framework. The examples (consisting of 74 sample projects) that accompany this book are based on Spring 4.3 and Java 8. You can download the examples described in this book from the following GitHub project:github.com/getting-started-with-spring/3rdEdition This book is meant for Java developers with little or no knowledge of Spring Framework. Getting started with Spring Framework, Third Edition has been updated to reflect changes in Spring 4.3 and also includes new chapters on Java-based configuration and Spring Data (covers Spring Data JPA and Spring Data MongoDB projects). The existing chapters have been revised to include information on Java-based configuration. The book also includes some new information on bean definition profiles, importing application context XML files, lazy autowiring, creating custom qualifier annotations, JSR 349 annotations, spring-messaging module, Java 8's Optional type, and s...

  6. Remedial action programs annual meeting: Meeting notes

    International Nuclear Information System (INIS)

    1987-01-01

    The US Department of Energy Grand Junction Projects Office was pleased to host the 1987 Remedial Action programs Annual Meeting and herein presents notes from that meeting as prepared (on relatively short notice) by participants. These notes are a summary of the information derived from the workshops, case studies, and ad hoc committee reports rather than formal proceedings. The order of the materials in this report follows the actual sequence of presentations during the annual meeting

  7. Annual report of SPring-8, 1996

    International Nuclear Information System (INIS)

    1997-01-01

    This report summarizes the activities of the SPring-8 Project in 1996. The purpose of the SPring-8 Project is to construct the world's most brilliant synchrotron radiation source in the soft and hard x-ray regions. The construction of the facility started in 1990, and the Project approaches its final stage of construction with the most outstanding progress in 1996 being the successful commissioning of the injector linac and the booster synchrotron. Installation of the linac was completed by the end of 1995 and the power test of the entire system started in January 1996. After the RF aging of the waveguide and accelerator columns for three months, the commissioning of the linac started on August 1 and it succeeded to accelerate electrons up to 1 GeV one week later. As for the booster synchrotron, its installation and precise alignment were completed in September. After the full power test of two months, the synchrotron commissioning started on December 6. Electrons were accelerated up to 8 GeV on December 16. The installation of all magnets in the storage ring was completed and the precise alignment of focusing magnets is under way. The installation of vacuum chambers and RF cavities has already been completed and the evacuation test is going on. The commissioning of the storage ring is scheduled in March, 1997. (M.N.)

  8. Sol Duc Hot Springs feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    1981-12-01

    Sol Duc Springs is located in the Olympic National Park in western Washington state. Since the turn of the century, the area has served as a resort, offering hot mineral baths, lodge and overnight cabin accommodations. The Park Service, in conjunction with the concessionaire, is in the process of renovating the existing facilities, most of which are approximately 50 years old. The present renovation work consists of removing all of the existing cabins and replacing them with 36 new units. In addition, a new hot pool is planned to replace the existing one. This report explores the possibility of a more efficient use of the geothermal resource to accompany other planned improvements. It is important to note that the system outlined is based upon the resource development as it exists currently. That is, the geothermal source is considered to be: the two existing wells and the hot springs currently in use. In addition, every effort has been made to accommodate the priorities for utilization as set forth by the Park Service.

  9. Hard-tip, soft-spring lithography.

    Science.gov (United States)

    Shim, Wooyoung; Braunschweig, Adam B; Liao, Xing; Chai, Jinan; Lim, Jong Kuk; Zheng, Gengfeng; Mirkin, Chad A

    2011-01-27

    Nanofabrication strategies are becoming increasingly expensive and equipment-intensive, and consequently less accessible to researchers. As an alternative, scanning probe lithography has become a popular means of preparing nanoscale structures, in part owing to its relatively low cost and high resolution, and a registration accuracy that exceeds most existing technologies. However, increasing the throughput of cantilever-based scanning probe systems while maintaining their resolution and registration advantages has from the outset been a significant challenge. Even with impressive recent advances in cantilever array design, such arrays tend to be highly specialized for a given application, expensive, and often difficult to implement. It is therefore difficult to imagine commercially viable production methods based on scanning probe systems that rely on conventional cantilevers. Here we describe a low-cost and scalable cantilever-free tip-based nanopatterning method that uses an array of hard silicon tips mounted onto an elastomeric backing. This method-which we term hard-tip, soft-spring lithography-overcomes the throughput problems of cantilever-based scanning probe systems and the resolution limits imposed by the use of elastomeric stamps and tips: it is capable of delivering materials or energy to a surface to create arbitrary patterns of features with sub-50-nm resolution over centimetre-scale areas. We argue that hard-tip, soft-spring lithography is a versatile nanolithography strategy that should be widely adopted by academic and industrial researchers for rapid prototyping applications.

  10. The Egyptian Arab Spring and Political Islam

    Directory of Open Access Journals (Sweden)

    Ayman Gad El ashkar

    2016-07-01

    Full Text Available This study elaborates and analyzes the phenomenon and concept of political Islam, the reasons of the increased role of the Islamists and their political and reformist tendencies in the light of the Egyptian revolution of Arab Spring, reasons and the main factors that have contributed on their advent into power and their influence in that time, the issue of the application of Islamic Sharia and complex realities about this dilemma. The revolutions of Arab Spring, including the Egyptian revolution, are considered one of the most important and most dangerous events in the XXI century after the terrorist attacks of 11 September 2001, not only in the Middle East but throughout the world because of their impact on peace and global security. The growth of the phenomenon of political Islam and the advent of Islamists into power in Egypt has represented one of the most remarkable features of this sudden revolution. No doubt that the issue of the relationship between Islam and the state's political system raises many confusing questions for many people. In this sense the importance of this study will directly identify the fact that the leadership of Islamists in Egypt is not the implementation of Islamic Sharia but their movements and ideology.

  11. Nuclear resonant scattering beamline at SPring-8

    Energy Technology Data Exchange (ETDEWEB)

    Harami, Taikan [Japan Atomic Energy Research Inst., Kamigori, Hyogo (Japan). Kansai Research Establishment

    1996-04-01

    Mainly by Japan Atomic Energy Research Institute, the Institute of Physical and Chemical Research and Japan Synchrotron Radiation Research Institute, the construction of the Super Photon ring-8 GeV (SPring-8) which is the large scale synchrotron radiation facility for a high luminance light source placing emphasis on short wavelength region (shorter than about 1 nm) is in progress at the Harima Science Park City, Hyogo Prefecture. The features of the SPring-8 are the high luminance of light, the good parallelism and directionality of light, the quasi-monochromatic light with variable wavelength, and the possibility of design from straight polarization to circular polarization. The injection system that accelerates electrons up to 8 GeV and the storage ring storing the 8 GeV electrons for long hours, and 61 beamlines are explained. The manufacture of the nuclear resonant scattering beamline as the beamline for joint utilization was begun. Its transport channel and the experiment hutch are shown. By the features of undulator synchrotron radiation, the research on the matters with small recoilless fraction such as biological substances, liquid, gas and others and the research on time-dependent phenomena become feasible anew. The research on the dynamic structural analysis of heme protein is planned. (K.I.)

  12. Thermal water of the Yugawara Hot Spring

    Energy Technology Data Exchange (ETDEWEB)

    Oki, Y; Ogino, K; Nagatsuka, Y; Hirota, S; Kokaji, F; Takahashi, S; Sugimoto, M

    1963-03-01

    The Yugawara Hot Spring is located in the bottom of the dissected creata of the Yugawara volcano. Natural hot spring water ran dry almost twenty five years ago, and thermal water is now pumped up by means of deep drill holes. The hydrorogy of the thermal water was studied from both geochemical and geophysical points of view. Two types of thermal water, sodium chloride and calcium sulfate, are recognized. Sodium chloride is predominant in the high temperature area and low in the surrounding low temperature area. Calcium sulfate predominates in the low temperature area. Sodium chloride is probably derived from deep magmatic emanations as indicated in the high Li content. Sulfate ion seems to originate from oxidation of pyrite whose impregnation took place in the ancient activity of the Yugawara volcano. The content of Ca is stoichiometrically comparable with SO/sub 4//sup 2 -/. It is suggested that sulfuric acid derived from the oxidation of pyrite attacks calcite formed during the hydrothermal alteration of rocks. Some consideration of well logging in the geothermal area is also discussed. Temperature measurement in recharging of cold water is applicable to the logging of drill holes as well as the electric logging.

  13. Health Care, the Arab Spring and After

    Directory of Open Access Journals (Sweden)

    Sonia Alianak

    2016-10-01

    Full Text Available This study analyzes the effect of health care on Middle Eastern countries on the eve of and soon after the Arab Spring. It posits that countries that were most stable were the healthiest ones; countries which underwent revolutions were the unhealthiest ones; whereas countries that settled for reforms were moderate in health. It presents a hypothesis, the Inverted Funnel Model Hypothesis, that states that as the level of health care of a country rises so does its stability, which in turn leads to better health care as if down an inverted funnel to hypothetical maximums of both health care and stability. To test the hypothesis both quantitative and qualitative methods are used. The quantitative part involves first of all compiling seven health indicators based on the World Health Organization Annual Reports on twelve individual countries, for a period of five years preceding the Arab Spring’s onset in 2011 and in the immediate aftermath of 2011, and, second of all running correlations with political stability of each country, grouped in a three-way typology of countries. This is supplemented by a qualitative part which analyzes the health perceptions and demands of Arab Spring protesters in search of social justice.

  14. Hydrosalinity studies of the Virgin River, Dixie Hot Springs, and Littlefield Springs, Utah, Arizona, and Nevada

    Science.gov (United States)

    Gerner, Steven J.; Thiros, Susan A.; Gerner, Steven J.; Thiros, Susan A.

    2014-01-01

    The Virgin River contributes a substantial amount of dissolved solids (salt) to the Colorado River at Lake Mead in the lower Colorado River Basin. Degradation of Colorado River water by the addition of dissolved solids from the Virgin River affects the suitability of the water for municipal, industrial, and agricultural use within the basin. Dixie Hot Springs in Utah are a major localized source of dissolved solids discharging to the Virgin River. The average measured discharge from Dixie Hot Springs during 2009–10 was 11.0 cubic feet per second (ft3/s), and the average dissolved-solids concentration was 9,220 milligrams per liter (mg/L). The average dissolved-solids load—a measurement that describes the mass of salt that is transported per unit of time—from Dixie Hot Springs during this period was 96,200 tons per year (ton/yr). Annual dissolved-solids loads were estimated at 13 monitoring sites in the Virgin River Basin from streamflow data and discrete measurements of dissolved-solids concentrations and (or) specific conductance. Eight of the sites had the data needed to estimate annual dissolved-solids loads for water years (WYs) 1999 through 2010. During 1999–2010, the smallest dissolved-solids loads in the Virgin River were upstream of Dixie Hot Springs (59,900 ton/yr, on average) and the largest loads were downstream of Littlefield Springs (298,200 ton/yr, on average). Annual dissolved-solids loads were smallest during 2002–03, which was a period of below normal precipitation. Annual dissolved-solids loads were largest during 2005—a year that included a winter rain storm that resulted in flooding throughout much of the Virgin River Basin. An average seepage loss of 26.7 ft3/s was calculated from analysis of monthly average streamflow from July 1998 to September 2010 in the Virgin River for the reach that extends from just upstream of the Utah/Arizona State line to just above the Virgin River Gorge Narrows. Seepage losses from three river reaches

  15. Developing a composite based elliptic spring for automotive applications

    International Nuclear Information System (INIS)

    Talib, Abdul Rahim Abu; Ali, Aidy; Goudah, G.; Lah, Nur Azida Che; Golestaneh, A.F.

    2010-01-01

    An automotive suspension system is designed to provide both safety and comfort for the vehicle occupants. In this study, finite element models were developed to optimize the material and geometry of the composite elliptical spring based on the spring rate, log life and shear stress parameters. The influence of the ellipticity ratio on the performance of woven roving-wrapped composite elliptical springs was investigated both experimentally and numerically. The study demonstrated that composite elliptical springs can be used for light and heavy trucks with substantial weight reduction. The results showed that the ellipticity ratio significantly influenced the design parameters. Composite elliptic springs with ellipticity ratios of a/b = 2 had the optimum spring parameters.

  16. Effects of springs on a pendulum electromechanical energy harvester

    Directory of Open Access Journals (Sweden)

    Arnaud Notué Kadjie

    2014-01-01

    Full Text Available This paper studies a model of energy harvester that consists of an electromechanical pendulum system subjected to nonlinear springs. The output power is analyzed in terms of the intrinsic parameters of the device leading to optimal parameters for energy harvesting. It is found that in an appropriate range of the springs constant, the power attains higher values as compared to the case without springs. The dynamical behavior of the device shows transition to chaos.

  17. Effects of springs on a pendulum electromechanical energy harvester

    OpenAIRE

    Arnaud Notué Kadjie; Paul Woafo

    2014-01-01

    This paper studies a model of energy harvester that consists of an electromechanical pendulum system subjected to nonlinear springs. The output power is analyzed in terms of the intrinsic parameters of the device leading to optimal parameters for energy harvesting. It is found that in an appropriate range of the springs constant, the power attains higher values as compared to the case without springs. The dynamical behavior of the device shows transition to chaos.

  18. Navigator. Volume 45, Number 3, Spring 2009

    Science.gov (United States)

    National Science Education Leadership Association, 2009

    2009-01-01

    The National Science Education Leadership Association (NSELA) was formed in 1959 to meet a need to develop science education leadership for K-16 school systems. "Navigator" is published by NSELA to provide the latest NSELA events. This issue of "Navigator" includes the following items: (1) A Message from the President (Brenda Wojnowski); (2) NSELA…

  19. NOVA[R] Spring 2002 Teacher's Guide.

    Science.gov (United States)

    Armstrong, Peter; Ransick, Kristi; Rosene, Dale; Sammons, James

    The guide presents lesson plans from "NOVA" which targets middle school and junior high school students and meet the National Science Education Standards. Lessons include: (1) "Neanderthals on Trial"; (2) "Fireworks"; (3) "Secrets, Lies and Atomic Spies"; (4) "Bioterror"; (5) "The Missing…

  20. Outlier Loci Detect Intraspecific Biodiversity amongst Spring and Autumn Spawning Herring across Local Scales.

    Directory of Open Access Journals (Sweden)

    Dorte Bekkevold

    Full Text Available Herring, Clupea harengus, is one of the ecologically and commercially most important species in European northern seas, where two distinct ecotypes have been described based on spawning time; spring and autumn. To date, it is unknown if these spring and autumn spawning herring constitute genetically distinct units. We assessed levels of genetic divergence between spring and autumn spawning herring in the Baltic Sea using two types of DNA markers, microsatellites and Single Nucleotide Polymorphisms, and compared the results with data for autumn spawning North Sea herring. Temporally replicated analyses reveal clear genetic differences between ecotypes and hence support reproductive isolation. Loci showing non-neutral behaviour, so-called outlier loci, show convergence between autumn spawning herring from demographically disjoint populations, potentially reflecting selective processes associated with autumn spawning ecotypes. The abundance and exploitation of the two ecotypes have varied strongly over space and time in the Baltic Sea, where autumn spawners have faced strong depression for decades. The results therefore have practical implications by highlighting the need for specific management of these co-occurring ecotypes to meet requirements for sustainable exploitation and ensure optimal livelihood for coastal communities.

  1. Reactivation of Open Coil Springs: A Novel Procedure

    Directory of Open Access Journals (Sweden)

    Sanjeeb Kumar Sahu

    2012-01-01

    Full Text Available Open coil springs are commonly used in orthodontic practice to create space for a palatally or lingually blocked out tooth. However, very often the clinician encounters a situation where the inter-bracket span is very less and the open coil spring is not long enough to open the required space needed for alignment. In such situations, the clinician needs to remove the arch wire and reinserts a longer coil spring. A new simple and cost-effective technique describes an intraoral reactivation of an open coil spring without the need for removal of the base archwire with the additional benefit of preventing unwanted forces to the adjacent teeth.

  2. Analytical Technique of Selection of Constructive Parameters Pneumatichydraulic Springs

    Directory of Open Access Journals (Sweden)

    A. A. Tsipilev

    2014-01-01

    Full Text Available The article "Technique for Analytical Selection of Design Parameters of Pneumatichydraulic Springs concerns the ride smoothness of high-speed vehicles. Author of article Tsipilev A.A. is an assistant at chair "Multi-purpose Tracked Vehicles and Mobile Robots" of BMSTU. The article represents a synthesis of known information on the springing systems and an analysis of relation between spring design data and running gear. It describes standard units of running gear of vehicle in the context of springing systems. Classification of springing systems is considered. Modernization general policy for existing suspensions and prospects for creation of new ones are given. The article considers a design of various pneumatic-hydraulic springs to be set on domestic tracked vehicles. A developed technique allows us to have elastic characteristics of pneumatic-hydraulic springs of various types using these design data and kinematics of the running gear. The article provides recommendations to calculate characteristics of springing systems. The adequacy analysis of the given technique based on the comparison of real and rated characteristics of the existing suspension is conducted. This article can be useful to the experts dealing with springing systems of wheel and tracked vehicles.

  3. Mechanics of patterned helical Si springs on Si substrate.

    Science.gov (United States)

    Liu, D L; Ye, D X; Khan, F; Tang, F; Lim, B K; Picu, R C; Wang, G C; Lu, T M

    2003-12-01

    The elastic response, including the spring constant, of individual Si helical-shape submicron springs, was measured using a tip-cantilever assembly attached to a conventional atomic force microscope. The isolated, four-turn Si springs were fabricated using oblique angle deposition with substrate rotation, also known as the glancing angle deposition, on a templated Si substrate. The response of the structures was modeled using finite elements, and it was shown that the conventional formulae for the spring constant required modifications before they could be used for the loading scheme used in the present experiment.

  4. Wavelength variation of a standing wave along a vertical spring

    Science.gov (United States)

    Welsch, Dylan; Baker, Blane

    2018-03-01

    Hand-driven resonance can be observed readily in a number of mechanical systems including thin boards, rods, strings, and springs. In order to show such behavior in the vertical spring pictured in Fig. 1, a section of spring is grasped at a location about one meter from its free end and driven by small, circular motions of the hand. At driving frequencies of a few hertz, a dramatic standing wave is generated. One of the fascinating features of this particular standing wave is that its wavelength varies along the length of the spring.

  5. Experimental investigation and modeling of dynamic performance of wave springs

    OpenAIRE

    Tang, N.; Rongong, J.; Lord, C.; Sims, N.

    2016-01-01

    This paper investigates vibration suppression potentials for a novel frictional system - a wave spring.\\ud Two different types of wave springs, crest-to-crest and nested ones, were used in this work. Compared with\\ud nested wave springs, crest-to-crest wave springs have lower damping and a larger range for the linear stiffness\\ud due to a reduced level of contact. Dynamic compressive tests, subject to different static compression levels,\\ud are carried out to investigate the force-displacemen...

  6. Pressurizer safety valve serviceability enhancement by spring compression stability

    Energy Technology Data Exchange (ETDEWEB)

    Ratiu, M.D.; Moisidis, N.T. [California Consulting Engineering and Technology (CALCET), San Leandro, California (United States)

    2007-07-01

    The proactive maintenance of the spring-loaded-self-actuated Pressurizer Safety Valve (PSV) has caused frequent concerns pertaining the spring self actuated reliability due to set point drift, spurious openings, and seat leakage. The exhaustive testing performed on a Crosby PSV model 6M6 has revealed that the principal cause of these malfunctions is the spring compression elastic instability during service. The spring lateral deformations measurements performed validated the analytical shapes for spring compression: symmetrical bending - for coaxial supported ends - restraining any support displacement, and asymmetrical bending induced by the potential misalignment of the supported top end. The source of the spring compression instability appears on the tested Crosby PSV induced by the top end lateral displacement during long term operation. The testing with restrained displacement at the spring top has shown consistent set-point reproducibility, less than +/- 1 per cent. To eliminate the asymmetrical spring buckling, a design review of the PSV is proposed including the guided fixture at the top and the decrease of spring coil slenderness ratio H/D, corresponding to the general analytical elastic stability for the asymmetrical compression. (authors)

  7. Pressurizer safety valve serviceability enhancement by spring compression stability

    International Nuclear Information System (INIS)

    Ratiu, M.D.; Moisidis, N.T.

    2007-01-01

    The proactive maintenance of the spring-loaded-self-actuated Pressurizer Safety Valve (PSV) has caused frequent concerns pertaining the spring self actuated reliability due to set point drift, spurious openings, and seat leakage. The exhaustive testing performed on a Crosby PSV model 6M6 has revealed that the principal cause of these malfunctions is the spring compression elastic instability during service. The spring lateral deformations measurements performed validated the analytical shapes for spring compression: symmetrical bending - for coaxial supported ends - restraining any support displacement, and asymmetrical bending induced by the potential misalignment of the supported top end. The source of the spring compression instability appears on the tested Crosby PSV induced by the top end lateral displacement during long term operation. The testing with restrained displacement at the spring top has shown consistent set-point reproducibility, less than +/- 1 per cent. To eliminate the asymmetrical spring buckling, a design review of the PSV is proposed including the guided fixture at the top and the decrease of spring coil slenderness ratio H/D, corresponding to the general analytical elastic stability for the asymmetrical compression. (authors)

  8. Design of SPring-8 control system

    International Nuclear Information System (INIS)

    Wada, T.; Kumahara, T.; Yonehara, H.; Yoshikawa, H.; Masuda, T.; Wang Zhen

    1992-01-01

    The control system of SPring-8 facility is designed. A distributed computer system is adopted with a three-hierarchy levels. All the computers are linked by computer networks. The network of upper level is a high-speed multi-media LAN such as FDDI which links sub-system control computers, and middle are Ethernet or MAP networks which link front end processors (FEP) such as VME system. The lowest is a field level bus which links VME and controlled devices. Workstations (WS) or X-terminals are useful for man-machine interfaces. For operating system (OS), UNIX is useful for upper level computers, and real-time OS's for FEP's. We will select hardwares and OS of which specifications are close to international standards. Since recently the cost of software has become higher than that of hardware, we introduce computer aided tools as many as possible for program developments. (author)

  9. Hot Springs-Garrison Fiber Optic Project

    International Nuclear Information System (INIS)

    1994-10-01

    Bonneville Power Administration (BPA) is proposing to upgrade its operational telecommunications system between the Hot Springs Substation and the Garrison Substation using a fiber optic system. The project would primarily involve installing 190 kilometers (120 miles) of fiber optic cable on existing transmission structures and installing new fiber optic equipment in BPA's substation yards and control houses. BPA prepared an environmental assessment (EA) evaluating the proposed action. This EA was published in October 1994. The EA identifies a number of minor impacts that might occur as a result of the proposed action, as well as some recommended mitigation measures. This Mitigation Action Plan (MAP) identifies specific measures to avoid, minimize, or compensate for impacts identified in the EA

  10. Wall current monitor for SPring-8 linac

    International Nuclear Information System (INIS)

    Yanagida, Kenichi; Yamada, Kouji; Yokoyama, Minoru

    1994-06-01

    A fast rise time, broad band width and wide dynamic range wall current monitor was developed for SPring-8 linac. The performances are a rise time of ∼250ps, an effective impedance of 1.4Ω (output of ∼1.4V/A) and a bandwidth of 18kHz-2GHz. From a result of examination using 40ns electron beam, a significant change of effective impedance was not observed when a peak current was changed up to 12A or when a beam was moved by 8mm in a vacuum pipe. A circuit model that includes a core inductor loop was constructed. Using this model effective impedance and band width were calculated and compared to measured ones. They agreed very well except one part. In consequence the mechanism of wall current monitor can be explained by means of this model. (author)

  11. Hot Springs-Garrison Fiber Optic Project

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    Bonneville Power Administration (BPA) is proposing to upgrade its operational telecommunications system between the Hot Springs Substation and the Garrison Substation using a fiber optic system. The project would primarily involve installing 190 kilometers (120 miles) of fiber optic cable on existing transmission structures and installing new fiber optic equipment in BPA`s substation yards and control houses. BPA prepared an environmental assessment (EA) evaluating the proposed action. This EA was published in October 1994. The EA identifies a number of minor impacts that might occur as a result of the proposed action, as well as some recommended mitigation measures. This Mitigation Action Plan (MAP) identifies specific measures to avoid, minimize, or compensate for impacts identified in the EA.

  12. Radon concentration measurements in therapeutic spring water

    International Nuclear Information System (INIS)

    Deak, N.; Horvath, A.; Sajo B, L.; Marx, G.

    1996-01-01

    It is believed that people undergoing a curative cycle in a given spa, may receive a dose in the range of 400 mSv/year which is many times the average annual dose so that their risk of lung cancer may increase by 3% or more. To determine the risk due to the natural radioactivity, of the most frequented spas in Budapest (H), we selected four and some others located on the country side being of particular interest. Results of the radon concentration in spring water are presented, with the evidence that some spas have a high radon concentration. We conclude that patients receiving treatment may be exposed to an additional dose in the range of 29-76 mSv/year that at the bronchia could be between 445-1182 mSv/year. (authors). 6 refs., 2 figs., 2 tabs

  13. Tight fitting garter springs-MODAR

    Energy Technology Data Exchange (ETDEWEB)

    Kazimer, D. [Bruce Power, Tiverton, Ontario (Canada)

    2011-07-01

    Annulus spacers are used in CANDU reactors to maintain the annular gap between two tubes - an inner pressure tube (PT) and the outer calandria tube (CT). Typically four annulus spacers are used in one fuel channel assembly, each at a specified axial position. Bruce Unit 8 and many other CANDU units were constructed with tight-fitting garter springs (TFGS). The TFGS were not designed to be detected or relocated by the conventional tool, Spacer Location And Repositioning (SLAR) processes. Due to non-optimal 'As Left' construction locations for the Bruce Unit 8 TFGS, PT/CT contact has been predicted to occur well prior to its End of Life (EOL). Bruce Power entered a Project with AECL-CRL to design, manufacture and test and implement a new tooling system that would detect and reposition tight fitting annulus spacers. (author)

  14. Stars Spring up Out of the Darkness

    Science.gov (United States)

    2006-01-01

    [figure removed for brevity, see original site] Click on the image for movie of Stars Spring up Out of the Darkness This artist's animation illustrates the universe's early years, from its explosive formation to its dark ages to its first stars and mini-galaxies. Scientists using NASA's Spitzer Space Telescope found patches of infrared light splattered across the sky that might be the collective glow of clumps of the universe's first objects. Astronomers do not know if these first objects were stars or 'quasars,' which are black holes voraciously consuming surrounding gas. The movie begins with a flash of color that represents the birth of the universe, an explosion called the Big Bang that occurred about 13.7 billion years ago. A period of darkness ensues, where gas begins to clump together. The universe's first stars are then shown springing up out of the gas clumps, flooding the universe with light, an event that probably happened about a few hundred million years after the Big Bang. Though these first stars formed out of gas alone, their deaths seeded the universe with the dusty heavy chemical elements that helped create future generations of stars. The first stars, called Population III stars (our star is a Population I star), were much bigger and brighter than any in our nearby universe, with masses about 1,000 times that of our sun. They grouped together into mini-galaxies, which then merged to form galaxies like our own mature Milky Way galaxy. The first quasars, not shown here, ultimately became the centers of powerful galaxies that are more common in the distant universe.

  15. Geothermal Exploration in Hot Springs, Montana

    Energy Technology Data Exchange (ETDEWEB)

    Toby McIntosh, Jackola Engineering

    2012-09-26

    The project involves drilling deeper in the Camp Aqua well dri lled in June 1982 as part of an effort to develop an ethanol plant. The purpose of the current drill ing effort is to determine if water at or above 165°F exists for the use in low temperature resource power generation. Previous geothermal resource study efforts in and around Hot Springs , MT and the Camp Aqua area (NE of Hot Springs) have been conducted through the years. A confined gravel aquifer exists in deep alluvium overlain by approximately 250 of si lt and c lay deposits from Glacial Lake Missoula. This gravel aquifer overlies a deeper bedrock aquifer. In the Camp Aqua area several wel l s exist in the gravel aquifer which receives hot water f rom bedrock fractures beneath the area. Prior to this exploration, one known well in the Camp Aqua area penetrated into the bedrock without success in intersecting fractures transporting hot geothermal water. The exploration associated with this project adds to the physical knowledge database of the Camp Aqua area. The dri l l ing effort provides additional subsurface information that can be used to gain a better understanding of the bedrock formation that i s leaking hot geothermal water into an otherwise cold water aquifer. The exi s t ing well used for the explorat ion is located within the center of the hottest water within the gravel aquifer. This lent i t sel f as a logical and economical location to continue the exploration within the existing well. Faced with budget constraints due to unanticipated costs, changing dril l ing techniques stretched the limited project resources to maximize the overa l l well depth which f e l l short of original project goals. The project goal of finding 165°F or hotter water was not achieved; however the project provides additional information and understanding of the Camp Aqua area that could prove valuable in future exploration efforts

  16. 19th JANNAF Safety and Environmental Protection Subcommittee Meeting. Volume 1

    Science.gov (United States)

    Cocchiaro, J. E. (Editor); Becker, D. L. (Editor)

    2002-01-01

    This volume, the first of two volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the 19th Joint Army-Navy-NASA-Air Force (JANNAF) Safety & Environmental Protection Subcommittee Meeting. The meeting was held 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. Topics covered include green energetic materials and life cycle pollution prevention; space launch range safety; propellant/munitions demilitarization, recycling, and reuse: and environmental and occupational health aspects of propellants and energetic materials.

  17. Minutes of the Meeting - Pennsylvania Electric Association, Engineering Section, Transmission and Distribution Committee, Spring, 1981

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Proceedings includes 8 papers dealing with underground and submarine crossings of electric power cables, underground fault locating equipment, lightning arresters, the current carrying capacity of conductors in distribution systems, emergency warning facilities in nuclear power plants, and the use of fiberglass/polyester materials in fiberglass poles

  18. The EPA CompTox Chemistry Dashboard - an online resource for environmental chemists (ACS Spring Meeting)

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program integrates advances in biology, chemistry, and computer science to help prioritize chemicals for further research based on potential human health risks. This work involves computational and data drive...

  19. 106th meeting of the working group electronic instrumentation in Spring 2015

    International Nuclear Information System (INIS)

    Goettlicher, Peter

    2015-06-01

    The following topics were dealt with: A survey of DESY, actual in DESY, the electronics sevice center of DESY, flip-chip technology at DES, CE certifications for electronic devices centrally performed by DESY ZE, a VHDL-based gigabit ethernet protocol pile for FPGAs, a digital camera trigger for the Cherenkov-telescope array, the trigger system in the Hess1 Upgrade camera, data connection between ships and zeppelin for the ascertainment of flow vortices, IP-based measurement devices on the base of FPGA, MTCA.4 RTM module based on the DRS-4 capacitor array, basic design rules, integrated phase-locked loop design, machine protection system for XFEL and FLASH II, general machine timing of FAIR, MTCA.4-based reference and clock distribution module for the European XFEL, the driving system of the 12-m Cherenkov telescope MST, ventilator driving tor VDC chambers in the CMS experiment, implementation of a TANGO server for the connection of the Mythen detector in the GALAXI experiment, the flexible PiLC controller for driving and measurement purposes with FPGA performance, measurement of important beam parameters of the LHC with diamond sensors, recent developments of the electronics for the ATLAS strip tracker upgrade, a flexible electromagnetic actuator system for the turbulence research, prototype development for the CALICE analogous hadronic calorimeter. (HSI)

  20. 107th meeting of the working group electronic instrumentation in Spring 2016

    International Nuclear Information System (INIS)

    Goettlicher, Peter

    2016-06-01

    The following topics were dealt with: Instrumentation and the NUSTAR physics program in FAIR phase-0, actual projects of the group EE-digital electronics, ethernet-based data acquisition beyond 10 GBit/s, the big data problem in DAQ systems, a general front-end readout architecture in scientific detector systems, the KALYPSO detection system for single-shot electro-optical bunch measurements, MicroTCA based RF and laser cavity regulation including piezo controls, FPGA implementation for data acquisition system with gigabit serial link and PCIe interface, next generation MTCA.4 crate, increased PCIexpress band-width up to 128 Gb/s and optical PCIexpress cascading, power supplies for the sensitive measurement techniques and the complex automatization, error-save industry PC, the interfacing of NI products to EPICS, Green Cube, a survey of EPICS rate at GSI and FAIR, CS++ as actor-based successor of the CS framework, synchronized fast shutter control with adaptive phase shift compensation in the EtherCAT motion control system, precise voltage supply for the SiPM of a Cherenkov telescope in the Antarctis, development of a multichannel readout hardware for delay-line neutron detectors, silicon photonic data transmission for detector instrumentation, EMV consideration of the Maria instrument at the FRM2, quench detectors for FAIR, optimized illumination and in-situ calibration of high-gain antennas for the detection of extensive cosmic air showers. (HSI)

  1. 105th meeting of the working group electronic instrumentation in Spring 2014

    International Nuclear Information System (INIS)

    Goettlicher, Peter

    2014-09-01

    The following topics were dealt with: Contactless flow-rate sensor for heavy liquid metals, half-balanced broadband low-noise amplifier for the detection of quantum shot noise of graphene, generation of short pulses with high amplitude with standard CFA, electronic division of the HZG, myths of the PCB design of digital high-speed signals, FPGA based readout and control for PANDA components, MTCA.4 for the optical synchronization system at the XFEL and the FLASH accelerator, heterogeneous systems in computing intensive applications, upgrade of the camera electronics of the 12-meter telescope of H.E.S.S., the SeRiVas testing tool for VMEbus modules, rework of leadless components, real-time control on single atoms, IBIS models in SPICE environments, off-shore data acquisition, plant PET and application of USB 3.0 for the data acquisition, tact synchronization and time measurement in a distributed data-acquisition system, developments in DESY FS-DS, the open intersection place TwinCAT 3 for automatic code generation, a prototype experiment at the DESY test beam with the governing system DOOCS, dynamic surface generation for the facility driving with LabVIEW, driving of a sputtering facility with LabVIEW, automatization for vacuum chambers realized with LabVIEW and Simatic S7-300, shor summary of the workshop microcontroller/SPS/control systems. (HSI)

  2. Text-mining strategies to support computational research in chemical toxicity (ACS 2017 Spring meeting)

    Science.gov (United States)

    With 26 million citations, PubMed is one of the largest sources of information about the activity of chemicals in biological systems. Because this information is expressed in natural language and not stored as data, using the biomedical literature directly in computational resear...

  3. Proceedings of the 2006 Combustion Institute Canadian Section spring technical meeting

    International Nuclear Information System (INIS)

    Devaud, C.; Weckman, E.; Lam, C.; Spike, E.

    2006-01-01

    This conference provided a networking opportunity for academic, government and industrial combustion researchers from across Canada. All aspects of combustion were discussed, particularly those related to new engine technologies that reduce exhaust gas emissions while maintaining performance. Major engine operating and fuelling control parameters that improve combustion efficiency were identified. The conference was divided into several sessions dealing with combustion emissions and pollutants such as soot and particulates; alternative fuels including biofuels and fuel cells; chemical kinetics; droplet and spray combustion; combustion synthesis of materials; detonations, explosions, fires, flammability, flares and incineration; environmental issues and hazard analysis; and, numerical modeling and simulation. The conference featured 61 presentations, of which 39 have been catalogued separately for inclusion in this database

  4. Mobilizing EPA's Comptox Chemistry Dashboard Data on Mobile Devices (ACS Spring Meeting)

    Science.gov (United States)

    The EPA’s National Center of Computational Toxicology (NCCT) Chemistry Dashboard provides access to chemistry data for about 720,000 chemical substances. The application is used to source, for example: physicochemical property data, bioassay screening data and functional use, and...

  5. TRIAD Annual Spring Meeting (49th) Held in Huntsville, Alabama on May 27, 2010

    Science.gov (United States)

    2010-05-27

    small diverse businesses. She also serves as a focal point to market USCS to the diverse supply base, customer base, and acts as a subject matter... Market research by Procurement/Technical/Program personnel  Benefits  Consolidate every Center’s database into one  O t ll NASA l f k t hpen o a...emp oyees or mar e researc  E-mail capability to vendors for RFI, draft RFPs, Sources Sought Notices  Vendors can post capability briefs in any

  6. Process improvements for enhanced productivity of PHWR garter springs

    International Nuclear Information System (INIS)

    Srinivasula Reddy, S.; Tonpe, Sunil; Saibaba, N.; Jayaraj, R.N.

    2009-01-01

    Full text: In Pressurised Heavy Water Reactors (PHWR), Garter springs are used as spacers between the coolant tube and calandria tube. Garter springs are made from Zirconium alloy containing 2.5 % Niobium and 0.5% copper. The springs are basically manufactured by coiling a wire of cross section 1.7 mm x 1.0 mm, which is produced by series of drawing and swaging operations using hot extruded rods of 19 mm diameter. The manufacturing process also involves heat treatment and chemical cleaning operations at appropriate stages. It is required to ensure that the life of springs against parameters like hydrogen pickup, residual stresses and low stiffness is improved at the manufacturing stage itself by improving manufacturing process. The impact of above problems on spring life and process improvements is briefly discussed. The critical factor affecting the garter spring performance in PHWR Reactor is mainly hydrogen. The life limiting factors for garter springs are the problems arising out of high total hydrogen content, which depends on the hydrogen pickup during reactor operation. This phenomenon can happen during the reactor operation, as springs are prone to pick-up hydrogen in the reactor environment. Hence acceptable hydrogen content for the springs is specified as 25 ppm (max.). Garter spring is susceptible to hydrogen pick-up during various production processes, which make material brittle and difficult for fabrication process such as wire drawing and coiling. By studying and optimizing the process parameters of spring manufacturing, the hydrogen pick-up of springs is brought down from 70 ppm to a level of 20 ppm. Garter springs are provided with a hook at each end to enable its assembly to coolant tube in the reactor. The hook portion is very critical in maintaining the integrity of the spring. It is desirable to have the hook portion relieved of all residual stresses. For this purpose manufacturing process has been modified and solutionising was introduced as

  7. Pemodelan Desain Sol Sepatu dengan Inovasi Penambahan Wave Spring

    Directory of Open Access Journals (Sweden)

    Redyarsa Dharma Bintara

    2015-07-01

    Full Text Available Desain sepatu sport berkembang pesat dengan tujuan mengurangi cedera dan meningkatkankenyamanan pengguna. Pengurangan cedera dilakukan dengan cara memperbesar energi yangdiserap dari beban akibat pengguna berlari atau melompat. Pada penelitian ini dilakukanpenambahan wave spring yang digunakan sebagai mekanisme penyerap beban.Pemodelandilakukan pada sol sepatu dengan menggunakan bantuan software finite element method (FEMAnsys 14.5 Academic. Model awal dilakukan untuk mengetahui batas deformasi sol sepatu yangakan dimanfaatkan sebagai input model berikutnya yaitu model dengan diberikan inovasipenambahan wave spring. Analisa difokuskan pada sol sepatu bagian belakang (tumit kaki.Darihasil simulasi, didapatkan bahwa penyerapan energi sol sepatu dengan penambahan wave springlebih besar daripada penyerapan energi sol sepatu tanpa penambahan wave spring, sehinggapenambahan wave spring memungkinkan untuk diaplikasikan pada sol sepatu sport.Kata kunci: Penyerapan energi, wave spring, sol sepatu. Sport shoe design had been developed rapidly with the purpose to reduce injuries and increaseuser comfort. Reduction of injury is done by enlarging the energy absorbed from the user running orjumping load. In this study, the addition of the wave spring is used as the load absorbingmechanism. The shoes sole is modeled by using finite element method (FEM software Ansys 14.5Academic. Initial model was conducted to determine the deformation boundary in soles which willbe used as input to the next model for the wave spring addition innovation. Analysis focused onshoe sole on heel foot. From the simulation results, it was found that the energy absorption shoessoles with the addition of the wave spring is greater than the energy absorption soles without theaddition of wave spring. It can be concluded that the addition of a spring wave can be applied to thesoles of sports shoes.Keywords: Energy absorb, wave spring, shoe sole, deformation boundary

  8. SPring-8 Structural Biology Beamlines / Current Status of Public Beamlines for Protein Crystallography at SPring-8

    International Nuclear Information System (INIS)

    Kawamoto, Masahide; Hasegawa, Kazuya; Shimizu, Nobutaka; Sakai, Hisanobu; Shimizu, Tetsuya; Nisawa, Atsushi; Yamamoto, Masaki

    2007-01-01

    SPring-8 has 2 protein crystallography beamlines for public use, BL38B1 (Structural Biology III) and BL41XU (Structural Biology I). The BL38B1 is a bending magnet beamline for routine data collection, and the BL41XU is an undulator beamline specially customized for micro beam and ultra-high resolutional experiment. The designs and the performances of each beamline are presented

  9. 76 FR 54536 - Meeting

    Science.gov (United States)

    2011-09-01

    ... UNITED STATES INSTITUTE OF PEACE Meeting AGENCY: United States Institute of Peace. Date/Time... Peace Act, Public Law 98-525. Agenda: September 22, 2011 Board Meeting; Approval of Minutes of the One Hundred Fortieth Meeting (June 23-24, 2011) of the Board of Directors; Chairman's Report; President's...

  10. 75 FR 58350 - Meeting

    Science.gov (United States)

    2010-09-24

    ... UNITED STATES ARCTIC RESEARCH COMMISSION Meeting Notice is hereby given that the U.S. Arctic Research Commission will hold its 94th meeting in Fairbanks, AK, on October 6-8, 2010. The business session... approval of the agenda. (2) Approval of the minutes from the 93rd meeting. (3) Commissioners and staff...

  11. Evaluating meeting support tools

    NARCIS (Netherlands)

    Post, W.M.; Huis in 't Veld, M. M.A.; Boogaard, S.A.A. van den

    2007-01-01

    Many attempts are underway for developing meeting support tools, but less attention is paid to the evaluation of meetingware. This article describes the development and testing of an instrument for evaluating meeting tools. First, we specified the object of evaluation -meetings- by means of a set of

  12. Evaluating meeting support tools

    NARCIS (Netherlands)

    Post, W.M.; Huis in't Veld, M.A.A.; Boogaard, S.A.A. van den

    2008-01-01

    Many attempts are underway for developing meeting support tools, but less attention is paid to the evaluation of meetingware. This article describes the development and testing of an instrument for evaluating meeting tools. First, we specified the object of evaluation - meetings - by means of a set

  13. Commuting for meetings

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Engelson, Leonid; Franklin, Joel P.

    2014-01-01

    Urban congestion causes travel times to exhibit considerable variability, which leads to coordination problems when people have to meet. We analyze a game for the timing of a meeting between two players who must each complete a trip of random duration to reach the meeting, which does not begin...

  14. Making Meetings Work Better.

    Science.gov (United States)

    Standke, Linda

    1978-01-01

    Focusing on the increased use by trainers of off-site facilities for employee training meetings, this article looks at some improvements and the expanding market in the meeting site industry. It also highlights emerging trends in the industry and covers the growth of meeting planning into a profession. (EM)

  15. The role of risk assessment in project planning at the Weldon Spring Quarry, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    Haroun, L.A.; Peterson, J.M.

    1989-01-01

    This paper presents the methodology used to prepare a baseline risk evaluation of the bulk wastes at the quarry. The DOE is proposing to remove these bulk wastes and transport them approximately 6.4 km (4 mi) to a temporary storage facility at the chemical plant area of the Weldon Spring site. The DOE has responsibility for cleanup activities at the Weldon Spring site under its Surplus Facilities Management Program (SFMP). A baseline risk evaluation is an evaluation of the potential impacts on human health and the environment that may result from exposure to releases of contaminants from a site in the absence of site remediation. This evaluation is a key component of the remedial investigation (RI) process, as identified in guidance from the US Environmental Protection Agency (EPA) that addresses sites subject to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended by the Superfund Amendments and Reauthorization Act of 1986. Response actions at the Weldon Spring quarry are subject to CERCLA requirements because the quarry is listed on the EPA's National Priorities List

  16. Feasibility study for management of the bulk wastes at the Weldon Spring quarry, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-02-01

    The US Department of Energy (DOE), under its Surplus Facilities Management Program, is responsible for conducting remedial actions at the Weldon Spring site in St. Charles County, Missouri. The Weldon Spring site, which is listed on the National Priorities List of the US Environmental Protection Agency (EPA), became contaminated as a result of processing and disposal activities that took place from the 1940s through the 1960s. The site consists of a quarry and a chemical plant area located about 6.4 km (4 mi) northeast of the quarry. The quarry is surrounded by the Weldon Spring Wildlife Area and is near a well field that constitutes a major source of potable water for St. Charles County; the nearest supply well is located about 0.8 km (0.5 mi) southeast of the quarry. From 1942 to 1969, the quarry was used for the disposal of various radioactively and chemically contaminated materials. Bulk wastes in the quarry consist of contaminated soils and sediments, rubble, metal debris, and equipment. As part of overall site remediation, DOE is proposing to conduct an interim remedial action at the quarry to manage the radioactively and chemically contaminated bulk waste contained therein. 105 refs., 33 figs., 42 tabs

  17. Portrait of a Geothermal Spring, Hunter’s Hot Springs, Oregon

    Directory of Open Access Journals (Sweden)

    Richard W. Castenholz

    2015-01-01

    Full Text Available Although alkaline Hunter’s Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73–74 °C (the world-wide upper limit for photosynthesis, and 68–70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria is at 54–55 °C, and the in situ lower limit at 47–48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47–48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments.

  18. Portrait of a Geothermal Spring, Hunter’s Hot Springs, Oregon

    Science.gov (United States)

    Castenholz, Richard W.

    2015-01-01

    Although alkaline Hunter’s Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73–74 °C (the world-wide upper limit for photosynthesis), and 68–70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria) is at 54–55 °C, and the in situ lower limit at 47–48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47–48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments. PMID:25633225

  19. Geochemical studies of Ishiwa hot springs in Yamanashi Prefecture-yearly change of hot springs

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, T. (Yamanashi Prefecture Womens Junior College, Japan)

    1971-12-01

    The effect of drilling on the Ishiwa hot springs was studied. About 50 wells have been drilled since 1961 when the first well was drilled to a depth of 146 m where 47/sup 0/C water flowed at 1376 l/min. Changes have occurred in flow rate, temperature, and chemical composition of the spring water. In area A near the foot of northern Okura-Keijisan along the Byodo and Fuefuki rivers, the pH value was 8.0 to 8.2 when drilling began, but it is now 7.4 to 8.0. In area B in the central spring area along the Chikatsu water reservoir, the pH was about 8.5 when drilling began, but is presently 10. The shift of area A pH to acidic is thought to be due to the effect of river water. The shift in area B pH to alkaline was thought to be connected to the fountainhead with pH 10 which appeared in the Kami-Ogihara Resseki district in Shioyama City. The fountainhead was located along the Fuefuki River at the foot of Obosatsu, 20 km from the Ishiwa area.

  20. Wheat Quality Council, Hard Spring Wheat Technical Committee, 2017 Crop

    Science.gov (United States)

    Nine experimental lines of hard spring wheat were grown at up to six locations in 2017 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spring...

  1. Automated cycled sprinkler irrigation for spring frost protection of cranberries

    Science.gov (United States)

    Sprinkler irrigation is essential for preventing spring frost bud damage in cranberry (Vaccinium macrocarpon Ait). Risk-averse growers have been reluctant to adopt the intermittent cycling of irrigation pumps as a standard management practice. In the spring of 2013 and 2014, an experiment was conduc...

  2. Microbiological studies of hot springs in India: a review.

    Science.gov (United States)

    Poddar, Abhijit; Das, Subrata K

    2018-01-01

    The earliest microbiological studies on hot springs in India date from 2003, a much later date compared to global attention in this striking field of study. As of today, 28 out of 400 geothermal springs have been explored following both culturable and non-culturable approaches. The temperatures and pH of the springs are 37-99 °C and 6.8-10, respectively. Several studies have been performed on the description of novel genera and species, characterization of different bio-resources, metagenomics of hot spring microbiome and whole genome analysis of few isolates. 17 strains representing novel species and many thermostable enzymes, including lipase, protease, chitinase, amylase, etc. with potential biotechnological applications have been reported by several authors. Influence of physico-chemical conditions, especially that of temperature, on shaping the hot spring microbiome has been established by metagenomic investigations. Bacteria are the predominant life forms in all the springs with an abundance of phyla Firmicutes, Proteobacteria, Actinobacteria, Thermi, Bacteroidetes, Deinococcus-Thermus and Chloroflexi. In this review, we have discussed the findings on all microbiological studies that have been carried out to date, on the 28 hot springs. Further, the possibilities of extrapolating these studies for practical applications and environmental impact assessment towards protection of natural ecosystem of hot springs have also been discussed.

  3. Remote access and automation of SPring-8 MX beamlines

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Go, E-mail: ueno@spring8.or.jp; Hikima, Takaaki; Yamashita, Keitaro; Hirata, Kunio; Yamamoto, Masaki [RIKEN SPring-8 Center, 1-1-1 Koto, Sayo-cho, Sayo-gun, Hyogo 679-5148 JAPAN (Japan); Hasegawa, Kazuya; Murakami, Hironori; Furukawa, Yukito; Mizuno, Nobuhiro; Kumasaka, Takashi [SPring-8/JASRI, 1-1-1 Koto, Sayo-cho, Sayo-gun, Hyogo 679-5198 JAPAN (Japan)

    2016-07-27

    At SPring-8 MX beamlines, a remote access system has been developed and started user operation in 2010. The system has been developed based on an automated data collection and data management architecture utilized for the confirmed scheme of SPring-8 mail-in data collection. Currently, further improvement to the remote access and automation which covers data processing and analysis are being developed.

  4. Nano-G accelerometer using geometric anti-springs

    NARCIS (Netherlands)

    Boom, B. A.; Bertolini, A.; Hennes, E.; Brookhuis, R. A.; Wiegerink, R. J.; Van Den Brand, J. F J; Beker, M. G.; Oner, A.; Van Wees, D.

    2017-01-01

    We report an ultra-sensitive seismic accelerometer with nano-g sensitivity, using geometric anti-spring technology. High sensitivity is achieved by an on-chip mechanical preloading system comprising four sets of curved leaf springs that support a proof-mass. Using this preloading mechanism,

  5. Chemical characteristics of the major thermal springs of Montana

    Energy Technology Data Exchange (ETDEWEB)

    Mariner, R.H.; Presser, T.S.; Evans, W.C.

    1976-07-01

    Twenty-one thermal springs in western Montana were sampled for chemical, isotope, and gas compositions. Most of the springs issue dilute to slightly saline sodium-bicarbonate waters of neutral to slightly alkaline pH. A few of the springs issue sodium-mixed anion waters of near neutral pH. Fluoride concentrations are high in most of the thermal waters, up to 18 miligrams per litre, while F/Cl ratios range from 3/1 in the dilute waters to 1/10 in the slightly saline waters. Most of the springs are theoretically in thermodynamic equilibrium with respect to calcite and fluorite. Nitrogen is the major gas escaping from most of the hot springs; however, Hunters Hot Springs issue principally methane. The deuterium content of the hot spring waters is typical of meteoric water in western Montana. Geothermal calculations based on silica concentrations and Na-K-Ca ratios indicate that most of the springs are associated with low temperature aquifers (less than 100/sup 0/C). Chalcedony may be controlling the silica concentrations in these low temperature aquifers even in ''granitic'' terranes.

  6. Synergy of a warm spring and dry summer

    Science.gov (United States)

    Yude Pan; David. Schimel

    2016-01-01

    An analysis suggests that high carbon uptake by US land ecosystems during the warm spring of 2012 offset the carbon loss that resulted from severe drought over the summer — and hints that the warm spring could have worsened the drought.

  7. Multiscale Mass-Spring Models of Carbon Nanotube Foams

    Science.gov (United States)

    2010-09-06

    Rev. 8-98) Prescribed by ANSI Std Z39-18 Graphical abstract (movie) Axial strain localization in a mesoscopic chain of five bistable springs. The...line). Graphical Abstract Research highlights • Axial strain localization in microscopic bistable spring chains mimics kink- ing of compressed carbon

  8. Use of thermal springs for geochemical exploration in Ethiopia ...

    African Journals Online (AJOL)

    In this study an attempt was made to examine precious metals in the localities of the hydrothermal areas in the central Rift valley with the objective of whether thermal springs can hit mineral deposits. Thus, Filwoha, Sodere, Ambo and Wondogenet thermal spring areas were selected and specimens were collected for gold, ...

  9. water quality evaluation of spring waters in nsukka, nigeria

    African Journals Online (AJOL)

    ES Obe

    2013-07-02

    Jul 2, 2013 ... directly from an underground formation from, which water flows naturally to the surface or from a bored ... evidence that surface runoff is readily entering the spring. This may mean the spring is contaminated with ... soil, hydrological factors that lead to runoff, and by biological processes within the aquatic.

  10. Microbiological and chemical assessment of spring water from a ...

    African Journals Online (AJOL)

    Assessment of spring water from Ikare-Akoko, a rural setting in southwest, Nigeria for microbial and chemical contaminants was carried out. Total heterotrophic bacteria count of 4.0 x 106 CFU/mL was highest during the peak of the rainy season in Omi-idu spring (Igbede community) while the lowest population of 0.14 x106 ...

  11. Preliminary geothermal investigations at Manley Hot Springs, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    East, J.

    1982-04-01

    Manley Hot Springs is one of several hot springs which form a belt extending from the Seward Peninsula to east-central Alaska. All of the hot springs are low-temperature, water-dominated geothermal systems, having formed as the result of circulation of meteoric water along deepseated fractures near or within granitic intrusives. Shallow, thermally disturbed ground at Manley Hot Springs constitutes an area of 1.2 km by 0.6 km along the lower slopes of Bean Ridge on the north side of the Tanana Valley. This area includes 32 springs and seeps and one warm (29.1/sup 0/C) well. The hottest springs range in temperature from 61/sup 0/ to 47/sup 0/C and are presently utilized for space heating and irrigation. This study was designed to characterize the geothermal system present at Manley Hot Springs and delineate likely sites for geothermal drilling. Several surveys were conducted over a grid system which included shallow ground temperature, helium soil gas, mercury soil and resistivity surveys. In addition, a reconnaissance ground temperature survey and water chemistry sampling program was undertaken. The preliminary results, including some preliminary water chemistry, show that shallow hydrothermal activity can be delineated by many of the surveys. Three localities are targeted as likely geothermal well sites, and a model is proposed for the geothermal system at Manley Hot Springs.

  12. Force delivery of Ni-Ti coil springs.

    Science.gov (United States)

    Manhartsberger, C; Seidenbusch, W

    1996-01-01

    Sentalloy springs (GAC, Central Islip, N.Y.) of the open and closed type were investigated with a special designed device. The closed coil springs were subjected to a tensile and the open coil springs to a compression test. After a first measurement, the springs were activated for a period of 4 weeks and then reinvestigated with the same procedure. It could be shown distinctly that, with the different coil springs, the force delivery given by the producer could be achieved only within certain limits. To remain in the martensitic plateau, changed activation ranges, and for the Sentalloy coil springs white and red of the open and closed type, also changed force deliveries had to be taken into account. There was a distinct decrease in force delivery between the first and second measurement. After considering the loading curves of all the Sentalloy coil springs and choosing the right activation range respective to the force delivery, it was found that the coil springs deliver a superior clinical behavior and open new treatment possibilities.

  13. Preliminary analysis of geothermal aspects of Brazilian thermal spring

    International Nuclear Information System (INIS)

    Hurter, S.J.; Hamza, V.M.

    1982-01-01

    Information on more than 400 geothermal springs in Brazil has been assembled. On the basis of the data colected the temperatures at the maximum depths of circulation of spring waters are calculated using the quality of silica dissolved in water. For some thermal springs temperatures are calculated on the basis of silica determination carrried out by us. Applying linear relations between silica temperature and geothermal flux the average depths of water circulation in the Parana Basin and the Brazilian folded belts surrounding the San Francisco craton are calculated. The radioactivity of the water, derived mainly from the dissolved radon can be correlated with the temperature of the spring. An inverse correlation, as was observed for thermal springs of Pocos de Caldas, can be used to calculate the ascent velocity of thermal waters, where as, a positive correlations could be interpreted as due to the mixing of thermal with surface waters. (Author) [pt

  14. Springing Response Due to Directional Wave Field Excitation

    DEFF Research Database (Denmark)

    Vidic-Perunovic, Jelena; Jensen, Jørgen Juncher

    2004-01-01

    This paper analyses the wave-induced high-frequency bending moment response of ships, denoted springing. The aim is to predict measured severe springing responses in a large bulk carrier. It is shown that the most important springing contribution is due to the resultant second order excitation...... in multidirectional sea. The incident pressure field from the second order bidirectional wave field is derived, including the non-linear cross-coupling terms between the two wave systems (e.g. wind driven waves and swell). The resulting effect of the super-harmonic cross-coupling interaction terms on the springing...... response is discussed. An example with opposing waves is given, representing probably the 'worst' case for energy exchange between the wave systems. Theoretical predictions of standard deviation of wave- and springing-induced stress amidships are compared with full-scale measurements for a bulk carrier....

  15. Diversity of Bamboos around springs in Malang East Java

    Directory of Open Access Journals (Sweden)

    Solikin Solikin

    2014-11-01

    Full Text Available Bamboos have important roles to people in the villages area. They are planted and used by the people for making houses, food, buckets, fences, ropes, fuels, musical instruments and plaits. The root distribution of Bamboos is large and fibrous, also the growth of their new clumps is ascendant so the Bamboos has good potency for water and soil conservation on river banks, around the springs, hillsides and scarps. The survey to invent the bamboos growing around the springs was conducted in Singosari, Lawang, Karangploso, Dau and Lowokwaru Malang East Java in May 2009. The Bamboos invented at 0-100 m from the springs. The results Showed that there were four Bamboos founded around the springs namely Bambusa blumeana,Dendrocalamus asper, Gigantochloa atter and Gigantochloa apus. Dendrocalamus asper was the most dominant species founded around the springs with relative frequency, relative density and important value index is 45.83 ; 58.49 and 104.32 respectively.

  16. Analysis of Damped Mass-Spring Systems for Sound Synthesis

    Directory of Open Access Journals (Sweden)

    Don Morgan

    2009-01-01

    Full Text Available There are many ways of synthesizing sound on a computer. The method that we consider, called a mass-spring system, synthesizes sound by simulating the vibrations of a network of interconnected masses, springs, and dampers. Numerical methods are required to approximate the differential equation of a mass-spring system. The standard numerical method used in implementing mass-spring systems for use in sound synthesis is the symplectic Euler method. Implementers and users of mass-spring systems should be aware of the limitations of the numerical methods used; in particular we are interested in the stability and accuracy of the numerical methods used. We present an analysis of the symplectic Euler method that shows the conditions under which the method is stable and the accuracy of the decay rates and frequencies of the sounds produced.

  17. Applying spatial analysis techniques to assess the suitability of multipurpose uses of spring water in the Jiaosi Hot Spring Region, Taiwan

    Science.gov (United States)

    Jang, Cheng-Shin

    2016-04-01

    The Jiaosi Hot Spring Region is located in northeastern Taiwan and is rich in geothermal springs. The geothermal development of the Jiaosi Hot Spring Region dates back to the 18th century and currently, the spring water is processed for various uses, including irrigation, aquaculture, swimming, bathing, foot spas, and recreational tourism. Because of the proximity of the Jiaosi Hot Spring Region to the metropolitan area of Taipei City, the hot spring resources in this region attract millions of tourists annually. Recently, the Taiwan government is paying more attention to surveying the spring water temperatures in the Jiaosi Hot Spring Region because of the severe spring water overexploitation, causing a significant decline in spring water temperatures. Furthermore, the temperature of spring water is a reliable indicator for exploring the occurrence and evolution of springs and strongly affects hydrochemical reactions, components, and magnitudes. The multipurpose uses of spring water can be dictated by the temperature of the water. Therefore, accurately estimating the temperature distribution of the spring water is critical in the Jiaosi Hot Spring Region to facilitate the sustainable development and management of the multipurpose uses of the hot spring resources. To evaluate the suitability of spring water for these various uses, this study spatially characterized the spring water temperatures of the Jiaosi Hot Spring Region by using ordinary kriging (OK), sequential Gaussian simulation (SGS), and geographical information system (GIS). First, variogram analyses were used to determine the spatial variability of spring water temperatures. Next, OK and SGS were adopted to model the spatial distributions and uncertainty of the spring water temperatures. Finally, the land use (i.e., agriculture, dwelling, public land, and recreation) was determined and combined with the estimated distributions of the spring water temperatures using GIS. A suitable development strategy

  18. Framework for Springs Stewardship Program and proposed action development: Spring Mountains National Recreation Area, Humboldt-Toiyabe National Forest

    Science.gov (United States)

    Marc Coles-Ritchie; Stephen J. Solem; Abraham E. Springer; Burton Pendleton

    2014-01-01

    In the desert Southwest, springs are an important ecological feature and serve as a focal point for both biological and human interactions on the landscape. As a result, attention has been placed on the stewardship and protection of these important resources. Management has traditionally focused on the more accessible and heavily used eastern canyons within the Spring...

  19. Transport properties of Topopah Spring tuff

    International Nuclear Information System (INIS)

    Lin, W.; Daily, W.

    1984-10-01

    Electrical resistivity, ultrasonic P-waves velocity, and water permeability were measured simultaneously on both intact and fractured Topopah Spring tuff samples at a confining pressure of 5.0 MPa, pore pressures to 2.5 MPa, and temperatures to 140 0 C. The tested samples were subjected to three dehydration and rehydration cycles. The dehydrations were accomplished at a temperature of 140 0 C, and the rehydrations were accomplished at various combinations of temperature and pore pressures so that the wetting fluid was either liquid water, steam or both. The electrical resistivity measurements indicate that for the intact sample, the drying and resaturation took place fairly uniformly throughout the sample. On the other hand, for the fractured sample, the drying and resaturation was spatially quite nonuniform. When samples had been subjected to 5 MPa of confining pressure and 140 0 C for several weeks, a gradual monotonic drift in resistivity was measured (decreasing resistivity when dry; increasing resistivity when wet). This may be the result of either minerological changes or grain boundary movement. In any case, the phenomenon may have important consequences on long term repository performance, and should be studied further. The permeability of the intact sample was independent of temperature, dehydration and rehydration cycles, and time. The permeability of the fractured sample, initially dominated by the fracture, decreased by about one order of magnitude after each dehydration and rehydration cycle. 11 references, 12 figures, 3 tables

  20. Phaedrus tandem mirror. Status report, Spring 1983

    International Nuclear Information System (INIS)

    1983-01-01

    During the spring of 1983, the Phaedrus group undertook a major up to air to improve diagnostic capabilities, modify RF antennas and clean up the inner vacuum surfaces of accumulated getter material. This time was also used to analyze more thoroughly our present data base and correlate it with relevant theoretical predictions. A neutral beam build up code has been developed to model RF central stream trapping and heating, neutral gas charge exchange losses with finite gyroradius effects, and beam aiming sensitivity. MHD stability of the central cell stand alone operation has been explained by a radial ponderomotive force which opposes the centrifugal force due to bad field line curvature. First drafts of research papers on RF trapping, electron cyclotron heating, the stand alone mode, and MHD instability studies were completed. All of these papers require more experiments to tie up loose ends but the loose ends were identified more clearly by this process. The remainder of this report will be organized by experimental area, describing in limited detail the status of current research, recent modifications to diagnostic and machine hardware and immediate future experimental objectives

  1. "I just wanted to get away": An analysis of spring breakers' travel motivations

    Science.gov (United States)

    Nuno F. Ribeiro; Paul E. Durrenberger; Careen M. Yarnal; Garry E. Chick

    2010-01-01

    Scholarly research on Spring Break has grown substantially and has often associated spring breakers' motivations with a number of risky behaviors. Recent research, however, has challenged these assumptions. The purpose of this study was to examine spring breakers' motivations for going on Spring Break. Unlike the media portrayal of Spring Break as a time of...

  2. 39 CFR 6.1 - Regular meetings, annual meeting.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Regular meetings, annual meeting. 6.1 Section 6.1 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE MEETINGS (ARTICLE VI) § 6.1 Regular meetings, annual meeting. The Board shall meet regularly on a schedule...

  3. Where photons meet phonons

    NARCIS (Netherlands)

    Buters, F.M.

    2017-01-01

    We investigate how radiation pressure can be used to influence the mechanical motion of a micro-mirror suspended from springs. This trampoline resonator is part of an optical Fabry-Perot cavity. By tuning the laser frequency with respect to the optical resonance, we are able to optically cool the

  4. Comparison of gas spring designs with adjustable spring characteristic for a free-piston engine; Vergleich von Gasfedervarianten mit variabler Kennlinie fuer einen Freikolbenmotor

    Energy Technology Data Exchange (ETDEWEB)

    Pohl, S.E.; Ferrari, C. [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Stuttgart (Germany). Inst. fuer Fahrzeugkonzepte

    2007-12-15

    In this paper two different gas spring designs for a free-piston application are introduced. On the basis of thermodynamic calculations the spring characteristics of a mass-variable and a volume-variable gas spring are analyzed for different operating points. A comparison of the spring performances indicates that the spring characteristics of the two designs only match at one operation point. Therefore, a calculation method minimizing the difference between the two spring characteristics over the entire operating range of a free piston engine is introduced. The theoretical examination is confirmed by measurements on a gas spring test stand. (orig.)

  5. Eleventh ITER negotiations meeting (N-11) and twelfth negotiators' standing sub-group meeting (NSSG-12)

    International Nuclear Information System (INIS)

    Luo Delong

    2005-01-01

    The Eleventh ITER Negotiations Meeting (N-11) and the Twelfth Negotiators' Standing Sub-Group (NSSG-12 convened on October 19-25, 2005 at the Kempinski Hotel Chengdu, Sichuan Province. China was the host of this meeting. Delegations from China, the European Union, Japan, the Republic of Korea, the Russian Federation and the United States of America, as well as members from the International Team, met there to continue their work to reach agreement on the joint implementation of the ITER international fusion energy R and D project. The delegations accepted the Vice Minister of Science and Technology, Mr. LIU Yanhua, and State Councillor, Mr. SHI Dinghuan as Moderators for N-11 and NSSG-12, respectively, and Mr. LUO Delong as Secretary for both meetings. At the Meeting, delegates discussed and made substantial progress on a full range of legal, technical, and administrative topics, including staffing for ITER, policies for managing the project and its procurements, and the continuing joint drafting of the agreement on establishing the international ITER Organization to implement the project. Delegates also explored the possibility of India joining the Negotiations. In the light of the reports presented to the Meeting from the recent joint exploratory mission to India, delegates identified a series of steps for the near future leading towards a possible agreement among all the Parties to India's accession. The Negotiations Meeting also discussed the progress report of NSSG and forward planning and future tasks. The Negotiators agreed that substantial progress was made on all topics, and delegations are optimistic that the Joint Implementation Agreement and related Annexes and instruments could be initialed in spring of 2006. As decided by all delegations, the next Twelfth ITER Negotiations Meeting will be held in Korea on 6 December, 2005

  6. Patterns of Macroinvertebrate and Fish Diversity in Freshwater Sulphide Springs

    Directory of Open Access Journals (Sweden)

    Ryan Greenway

    2014-09-01

    Full Text Available Extreme environments are characterised by the presence of physicochemical stressors and provide unique study systems to address problems in evolutionary ecology research. Sulphide springs provide an example of extreme freshwater environments; because hydrogen sulphide’s adverse physiological effects induce mortality in metazoans even at micromolar concentrations. Sulphide springs occur worldwide, but while microbial communities in sulphide springs have received broad attention, little is known about macroinvertebrates and fish inhabiting these toxic environments. We reviewed qualitative occurrence records of sulphide spring faunas on a global scale and present a quantitative case study comparing diversity patterns in sulphidic and adjacent non-sulphidic habitats across replicated river drainages in Southern Mexico. While detailed studies in most regions of the world remain scarce, available data suggests that sulphide spring faunas are characterised by low species richness. Dipterans (among macroinvertebrates and cyprinodontiforms (among fishes appear to dominate the communities in these habitats. At least in fish, there is evidence for the presence of highly endemic species and populations exclusively inhabiting sulphide springs. We provide a detailed discussion of traits that might predispose certain taxonomic groups to colonize sulphide springs, how colonizers subsequently adapt to cope with sulphide toxicity, and how adaptation may be linked to speciation processes.

  7. Simulation and analysis of tape spring for deployed space structures

    Science.gov (United States)

    Chang, Wei; Cao, DongJing; Lian, MinLong

    2018-03-01

    The tape spring belongs to the configuration of ringent cylinder shell, and the mechanical properties of the structure are significantly affected by the change of geometrical parameters. There are few studies on the influence of geometrical parameters on the mechanical properties of the tape spring. The bending process of the single tape spring was simulated based on simulation software. The variations of critical moment, unfolding moment, and maximum strain energy in the bending process were investigated, and the effects of different radius angles of section and thickness and length on driving capability of the simple tape spring was studied by using these parameters. Results show that the driving capability and resisting disturbance capacity grow with the increase of radius angle of section in the bending process of the single tape spring. On the other hand, these capabilities decrease with increasing length of the single tape spring. In the end, the driving capability and resisting disturbance capacity grow with the increase of thickness in the bending process of the single tape spring. The research has a certain reference value for improving the kinematic accuracy and reliability of deployable structures.

  8. Siliceous Shrubs in Yellowstone's Hot Springs: Implications for Exobiological Investigations

    Science.gov (United States)

    Guidry, S. A.; Chafetz, H. S.

    2003-01-01

    Potential relict hot springs have been identified on Mars and, using the Earth as an analog, Martian hot springs are postulated to be an optimal locality for recognizing preserved evidence of extraterrestrial life. Distinctive organic and inorganic biomarkers are necessary to recognize preserved evidence of life in terrestrial and extraterrestrial hot spring accumulations. Hot springs in Yellowstone National Park, Wyoming, U.S.A., contain a wealth of information about primitive microbial life and associated biosignatures that may be useful for future exobiological investigations. Numerous siliceous hot springs in Yellowstone contain abundant, centimeter-scale, spinose precipitates of opaline silica (opal-A). Although areally extensive in siliceous hot spring discharge channel facies, these spinose forms have largely escaped attention. These precipitates referred to as shrubs, consist of porous aggregates of spinose opaline silica that superficially resemble miniature woody plants, i.e., the term shrubs. Shrubs in carbonate precipitating systems have received considerable attention, and represent naturally occurring biotically induced precipitates. As such, shrubs have great potential as hot spring environmental indicators and, more importantly, proxies for pre-existing microbial life.

  9. Earlier vegetation green-up has reduced spring dust storms.

    Science.gov (United States)

    Fan, Bihang; Guo, Li; Li, Ning; Chen, Jin; Lin, Henry; Zhang, Xiaoyang; Shen, Miaogen; Rao, Yuhan; Wang, Cong; Ma, Lei

    2014-10-24

    The observed decline of spring dust storms in Northeast Asia since the 1950s has been attributed to surface wind stilling. However, spring vegetation growth could also restrain dust storms through accumulating aboveground biomass and increasing surface roughness. To investigate the impacts of vegetation spring growth on dust storms, we examine the relationships between recorded spring dust storm outbreaks and satellite-derived vegetation green-up date in Inner Mongolia, Northern China from 1982 to 2008. We find a significant dampening effect of advanced vegetation growth on spring dust storms (r = 0.49, p = 0.01), with a one-day earlier green-up date corresponding to a decrease in annual spring dust storm outbreaks by 3%. Moreover, the higher correlation (r = 0.55, p storm outbreak ratio (the ratio of dust storm outbreaks to times of strong wind events) indicates that such effect is independent of changes in surface wind. Spatially, a negative correlation is detected between areas with advanced green-up dates and regional annual spring dust storms (r = -0.49, p = 0.01). This new insight is valuable for understanding dust storms dynamics under the changing climate. Our findings suggest that dust storms in Inner Mongolia will be further mitigated by the projected earlier vegetation green-up in the warming world.

  10. Distribution of glycerol dialkyl glycerol tetraethers in Tibetan hot springs

    Directory of Open Access Journals (Sweden)

    Liu He

    2012-05-01

    Full Text Available Isoprenoidal glycerol dialkyl glycerol tetraethers (iGDGTs from the Gulu hot springs (23–83.6 °C, pH > 7 and Yangbajing hot springs (80–128 °C, pH > 7 were analyzed in order to investigate the distribution of archaeal lipids among different hot springs in Tibet. A soil sample from Gulu was incubated at different temperatures and analyzed for changes in iGDGTs to help evaluate whether surrounding soil may contribute to the iGDGTs in hot springs. The sources of bacterial GDGTs (bGDGTs in these hot springs were also investigated. The results revealed different profiles of iGDGTs between Gulu and Yangbajing hot springs. Core iGDGTs and polar iGDGTs also presented different patterns in each hot spring. The PCA analysis showed that the structure of polar iGDGTs can be explained by three factors and suggested multiple sources of these compounds. Bivariate correlation analysis showed significant positive correlations between polar and core bGDGTs, suggesting the in situ production of bGDGTs in the hot springs. Furthermore, in the soil incubation experiment, temperature had the most significant influence on concentration of bGDGTs rather than iGDGTs, and polar bGDGTs had greater variability than core bGDGTs with changing temperature. Our results indicated that soil input had little influence on the composition of GDGTs in Tibetan hot springs. On the other hand, ring index and TEX86 values were both positively correlated with incubation temperature, suggesting that the structure of archaeal lipids changed in response to varying temperature during incubation.

  11. SPRING FLORA OF CEMETERIES OF ODESSA

    Directory of Open Access Journals (Sweden)

    N. V. Gerasimyuk

    2014-04-01

    Full Text Available The spring flora was analyzed on six cemeteries in Odessa, such cemeteries as Vtoroe xristianskoe, Troickoe, Tairovskoe, Trete evrejskoe, Oficerskoe (Dmitrievskое and Severnoe. There were found and identified 235 species of plants, which belong to 186 genera and 67 families. There was taken a taxonomic analysis of flora of the cemeteries also of spreding of plants by ekobiomorphs, the analysis of hronotyp and origin. The proportion of the flora on the cemeteries is 1:2,8:3,5. The dominant family of the flora of Odessa’s cemeteries is Asteraceae. There are other leading families such as Rosaceae, Fabaceae, Poaceae, Brassicaceae, Lamiaceae. Herbs and trees are dominant among the life forms. Mesophytes and kseromezophytes are in the majority among hihromorphs. Heliophytes are on the first place by adapting to the light. Our results showed that the adventitious plants occupy up to 44% of all amount of plants at the cemeteries in Odessa. Kenophytes is a dominant group among them. Floragenetics analysis revealed the dominance of the plants from Asia. There have been allocated plants that were met at all six cemeteries independently of the location religious and age characteristics of the cemetery. "Core" of the flora of Odessa’s cemetery have made weed Acer negundo L., Ballota nigra L. and decorative Hedera helix L., Centaurea dealbata Willd., Buxus sempervirens L., Convallaria majalis L., Sedum kamtschaticum Fisch., Thuja occidentalis L., Hemerocalis fulva (L. L. There were found 4 species of plants that belong to the rare and endangered plants of Odessa’s region: Convallaria majalis L., Hyacinthella leucophaea (K. Koch Schur, Clematis integrifolia L., Paeonia tenuifolia L. Moreover Convallaria majalis L. grows on all six investigated cemeteries. Also two species: Hyacinthella leucophaea (K. Koch Schur and Clematis Keywords: cemeteries, Odessa, flora, plants, ekobiomorphs.

  12. SPRING FLORA OF CEMETERIES OF ODESSA

    Directory of Open Access Journals (Sweden)

    SPRING FLORA OF CEMETERIES OF ODESSA

    2014-04-01

    Full Text Available The spring flora was analyzed on six cemeteries in Odessa, such cemeteries as Vtoroe xristianskoe, Troickoe, Tairovskoe, Trete evrejskoe, Oficerskoe (Dmitrievskое and Severnoe. There were found and identified 235 species of plants, which belong to 186 genera and 67 families. There was taken a taxonomic analysis of flora of the cemeteries also of spreding of plants by ekobiomorphs, the analysis of hronotyp and origin. The proportion of the flora on the cemeteries is 1:2,8:3,5. The dominant family of the flora of Odessa’s cemeteries is Asteraceae. There are other leading families such as Rosaceae, Fabaceae, Poaceae, Brassicaceae, Lamiaceae. Herbs and trees are dominant among the life forms. Mesophytes and kseromezophytes are in the majority among hihromorphs. Heliophytes are on the first place by adapting to the light. Our results showed that the adventitious plants occupy up to 44% of all amount of plants at the cemeteries in Odessa. Kenophytes is a dominant group among them. Floragenetics analysis revealed the dominance of the plants from Asia. There have been allocated plants that were met at all six cemeteries independently of the location religious and age characteristics of the cemetery. "Core" of the flora of Odessa’s cemetery have made weed Acer negundo L., Ballota nigra L. and decorative Hedera helix L., Centaurea dealbata Willd., Buxus sempervirens L., Convallaria majalis L., Sedum kamtschaticum Fisch., Thuja occidentalis L., Hemerocalis fulva (L. L. There were found 4 species of plants that belong to the rare and endangered plants of Odessa’s region: Convallaria majalis L., Hyacinthella leucophaea (K. Koch Schur, Clematis integrifolia L., Paeonia tenuifolia L. Moreover Convallaria majalis L. grows on all six investigated cemeteries. Also two species: Hyacinthella leucophaea (K. Koch Schur and Clematis

  13. Clostridium XIV Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Lynd, Lee

    2016-08-28

    The 14th biannual Clostridium meeting was held at Dartmouth College from August 28 through 31, 2016. As noted in the meeting program (http://clostridiumxiv.com/wp-content/uploads/2016/09/Clostridium_XIV_program.pdf). the meeting featured 119 registered attendees, 33 oral presentations, 5 of which were given by younger presenters, 40 posters, and 2 keynote presentations, with strong participation by female and international scientists.

  14. Timescales for nitrate contamination of spring waters, northern Florida, USA

    Science.gov (United States)

    Katz, B.G.; Böhlke, J.K.; Hornsby, H.D.

    2001-01-01

    Residence times of groundwater, discharging from springs in the middle Suwannee River Basin, were estimated using chlorofluorocarbons (CFCs), tritium (3H), and tritium/helium-3 (3H/3He) age-dating methods to assess the chronology of nitrate contamination of spring waters in northern Florida. During base-flow conditions for the Suwannee River in 1997–1999, 17 water samples were collected from 12 first, second, and third magnitude springs discharging groundwater from the Upper Floridan aquifer. Extending age-dating techniques, using transient tracers to spring waters in complex karst systems, required an assessment of several models [piston-flow (PFM), exponential mixing (EMM), and binary-mixing (BMM)] to account for different distributions of groundwater age. Multi-tracer analyses of four springs yielded generally concordant PFM ages of around 20±2 years from CFC-12, CFC-113, 3H, and 3He, with evidence of partial CFC-11 degradation. The EMM gave a reasonable fit to CFC-113, CFC-12, and 3H data, but did not reproduce the observed 3He concentrations or 3H/3He ratios, nor did a combination PFM–EMM. The BMM could reproduce most of the multi-tracer data set only if both endmembers had 3H concentrations not much different from modern values. CFC analyses of 14 additional springs yielded apparent PFM ages from about 10 to 20 years from CFC-113, with evidence of partial CFC-11 degradation and variable CFC-12 contamination. While it is not conclusive, with respect to the age distribution within each spring, the data indicate that the average residence times were in the order of 10–20 years and were roughly proportional to spring magnitude. Applying similar models to recharge and discharge of nitrate based on historical nitrogen loading data yielded contrasting trends for Suwanee County and Lafayette County. In Suwanee County, spring nitrate trends and nitrogen isotope data were consistent with a peak in fertilizer input in the 1970s and a relatively high overall ratio

  15. Characterization of closed nickel-titanium orthodontic coil springs

    Energy Technology Data Exchange (ETDEWEB)

    Langeron, T. [Rene Descartes Univ., Paris V, Pontoise (France). Faculte de Chirurgie Dentaire; Filleul, M.P. [Rene Descartes Univ., Paris V, Pontoise (France). Faculte de Chirurgie Dentaire; ENSCP, Paris (France). Lab. de Metallurgie Structurale; Humbeeck, J. van [Katholieke Univ. Leuven, Heverlee (Belgium). Faculteit Toegepaste Wetenschappen, Metaalkunde en Toegepaste Materialkund

    2001-11-01

    Nickel-titanium orthodontic coil springs are used to move teeth with low forces and slow deactivation. The present paper provides data on transformation temperatures and on load-deflection rate at buccal temperature of closed Nickel-Titanium coil springs available on the market from ORMCO {sup trademark} and GAC {sup trademark}. All the springs exhibited superelasticity but their properties were not stable in the range of buccal temperatures and varied not only from one manufacturer to the other but they also varied from one batch to the other of each supplier. The need for more stability is stressed. (orig.)

  16. 1990 Fall Meeting Report

    Science.gov (United States)

    Chapman, David S.

    The AGU 1990 Fall Meeting, held in San Francisco December 3-7, continued the steady growth trend for the western meeting set over the last decade. About 5200 members registered for the meeting and 3836 papers were given. The scientific kickoff to the meeting was provided by a Union session on initial results of the current Magellan mission to Venus. The mission was also the focus of a public lecture and short film on highlights of the mission and an extensive Union poster session.

  17. Meetings in Organizations

    DEFF Research Database (Denmark)

    Ravn, Ib

    as having to serve organizational stakeholders (such as customers and users), and work must be subjectively meaningful to the modern, well-educated employee. Do meetings answer to these challenges? A survey of 300 knowledge workers in five highly successful, knowledge-intensive corporations in Denmark...... showed that although employees were satisfied with their managers; traditional meeting-management skills, the customer was largely invisible in organizational meetings, and the hearts and minds of the employees were not engaged to any significant degree in meetings. It is concluded that despite massive...

  18. 77 FR 9958 - Spring Pygmy Sunfish Candidate Conservation Agreement With Assurances; Receipt of Application for...

    Science.gov (United States)

    2012-02-21

    ... stained spring water, spring runs, and associated spring-fed wetlands (Warren 2004). The species is highly... disclosure, we cannot guarantee that we will be able to do so. Dated: February 14, 2012. Stephen M. Ricks...

  19. EDITORIAL: Nano Meets Spectroscopy Nano Meets Spectroscopy

    Science.gov (United States)

    Birch, David J. S.

    2012-08-01

    The multidisciplinary two-day Nano Meets Spectroscopy (NMS) event was held at the National Physical Laboratory (NPL), Teddington, UK, in September 2011. The event was planned from the outset to be at the interface of several areas—in particular, spectroscopy and nanoscience, and to bring together topics and people with different approaches to achieving common goals in biomolecular science. Hence the meeting cut across traditional boundaries and brought together researchers using diverse techniques, particularly fluorescence and Raman spectroscopy. Despite engaging common problems, these techniques are frequently seen as mutually exclusive with the two communities rarely interacting at conferences. The meeting was widely seen to have lived up to its billing in good measure. It attracted the maximum capacity of ~120 participants, including 22 distinguished speakers (9 from outside the UK), over 50 posters and a vibrant corporate exhibition comprising 10 leading instrument companies and IOP Publishing. The organizers were Professor David Birch (Chair), Dr Karen Faulds and Professor Duncan Graham of the University of Strathclyde, Professor Cait MacPhee of the University of Edinburgh and Dr Alex Knight of NPL. The event was sponsored by the European Science Foundation, the Institute of Physics, the Royal Society of Chemistry, NPL and the Scottish Universities Physics Alliance. The full programme and abstracts are available at http://sensor.phys.strath.ac.uk/nms/program.php. The programme was quite ambitious in terms of the breadth and depth of scope. The interdisciplinary and synergistic concept of 'X meets Y' played well, cross-fertilization between different fields often being a source of inspiration and progress. Fluorescence and Raman spectroscopy provided the core, but the meeting had little repetition and also attracted contributions on more specialist techniques such as CARS, super-resolution, single molecule and chiral methods. In terms of application the

  20. Elk Distributions Relative to Spring Normalized Difference Vegetation Index Values

    International Nuclear Information System (INIS)

    Smallidge, S.T.; Baker, T.T.; VanLeeuwen, D.; Gould, W.R.; Thompson, B.C.

    2010-01-01

    Rocky Mountain elk (Cervus elaphus) that winter near San Antonio Mountain in northern New Mexico provide important recreational and economic benefits while creating management challenges related to temporospatial variation in their spring movements. Our objective was to examine spring distributions of elk in relation to vegetative emergence as it progresses across the landscape as measured by remote sensing. Spring distributions of elk were closely associated with greater photosynthetic activity of spring vegetation in 2 of 3 years as determined using NDVI values derived from AVHRR datasets. Observed elk locations were up to 271% greater than expected in the category representing the most photosynthetic activity. This association was not observed when analyses at a finer geographic scale were conducted. Managers facing challenges involving human-wildlife interactions and land-use issues should consider environmental conditions that may influence variation in elk association with greener portions of the landscape.

  1. NEFSC 2001 Spring Bottom Trawl Survey (AL0104, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of the cruise are to: (1) determine the spring distribution and relative abundance of fish and selected invertebrate species; (2) collect biological...

  2. Formulating the spring discharge-function for the recession period ...

    Indian Academy of Sciences (India)

    College of Agricultural Engineering & Post Harvest Technology (CAEPHT),. Central Agricultural ... during the recession period is the key to its proper management. The spring .... In equation (1), Q is the recession flow, t is time, and a, b are ...

  3. SEAMAP 2011 Spring Plankton Survey (CU1101, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The primary survey objective was to assess the occurrence, abundance and geographical distribution of the early life stages of spring spawning fishes, especially...

  4. Ten NCI Researchers Among Spring Research Festival Award Winners | Poster

    Science.gov (United States)

    In a ceremony at the Fort Detrick Community Activities Center earlier this week, Maj. Gen. Barbara R. Holcomb, the commanding officer of the Fort Detrick garrison, distributed the awards for outstanding presentations and posters at the 2017 Spring Research Festival.

  5. Stravinsky: The Rite of Spring / Hartmut, Lück

    Index Scriptorium Estoniae

    Lück, Hartmut

    1996-01-01

    Uuest heliplaadist "Stravinsky: The Rite of Spring. Canticum Sacrum. Requiem Canticles. Choral Variations on "Vom Himmel hoch". Lausanne Pro Arte Choir, Suisse Romande Chamber Choir and Orchestra, Neeme Järvi. Chandos CHAN 9408 (75 minutes:DDD)

  6. NEFSC 1999 Spring Bottom Trawl Survey (AL9903, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of the cruise are to: (1) determine the spring distribution and relative abundance of fish and selected invertebrate species; (2) collect biological...

  7. Topology Counts: Force Distributions in Circular Spring Networks

    Science.gov (United States)

    Heidemann, Knut M.; Sageman-Furnas, Andrew O.; Sharma, Abhinav; Rehfeldt, Florian; Schmidt, Christoph F.; Wardetzky, Max

    2018-02-01

    Filamentous polymer networks govern the mechanical properties of many biological materials. Force distributions within these networks are typically highly inhomogeneous, and, although the importance of force distributions for structural properties is well recognized, they are far from being understood quantitatively. Using a combination of probabilistic and graph-theoretical techniques, we derive force distributions in a model system consisting of ensembles of random linear spring networks on a circle. We show that characteristic quantities, such as the mean and variance of the force supported by individual springs, can be derived explicitly in terms of only two parameters: (i) average connectivity and (ii) number of nodes. Our analysis shows that a classical mean-field approach fails to capture these characteristic quantities correctly. In contrast, we demonstrate that network topology is a crucial determinant of force distributions in an elastic spring network. Our results for 1D linear spring networks readily generalize to arbitrary dimensions.

  8. Thermoelastic properties on Cu-Zn-Al shape memory springs

    Directory of Open Access Journals (Sweden)

    Carlos Augusto do Nascimento Oliveira

    2010-06-01

    Full Text Available This paper present a thermomechanical study of actuators in form of helical springs made from shape memory alloy wires that can work as actuator and/or as sensor. These abilities are due to the martensitic transformation. This transformation is a diffusionless phase transition that occurs by a cooperative atomic rearrange mechanism. In this work, helical spring actuators were manufactured from Cu-Zn-Al shape memory alloy wires. The springs were submitted to constant tensile loads and thermal cycles. This procedure allows to determine thermoelastic properties of the shape memory springs. Thermomechanical properties were analyzed during 50 thermal cycles in the temperature range from 20 to 130 °C. Results of variations in critical transformation temperatures, thermoelastic strain and thermal hysteresis are discussed based on defects rearrangement and martensitic transformation theory.

  9. Spot-Welding Gun With Adjustable Pneumatic Spring

    Science.gov (United States)

    Burley, Richard K.

    1990-01-01

    Proposed spot-welding gun equipped with pneumatic spring, which could be bellows or piston and cylinder, exerts force independent of position along stroke. Applies accurate controlled force to joint welded, without precise positioning at critical position within stroke.

  10. SEAMAP Spring 2016 Plankton Survey (R21601, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During the 2016 Spring Plankton Survey, plankton samples were collected from a systematic grid of stations to assess distribution, occurrence and abundance of the...

  11. Improved Performance of Unpaved Roads During Spring Thaw

    National Research Council Canada - National Science Library

    Henry, Karen S; Olson, James P; Farrington, Stephen P; Lens, John

    2005-01-01

    Unpaved roads in Vermont are subject to deterioration from seasonal freezing and thawing, and many towns have roads that suffer chronic serviceability problems during the so-called "spring thaw," or mud season...

  12. SEAMAP Spring 2015 Plankton Survey (GU1501, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During the 2015 Spring Plankton Survey, plankton samples were collected from a systematic grid of stations to assess distribution, occurrence and abundance of the...

  13. Soda Creek springs - metamorphic waters in the eastern Alaska Range

    Science.gov (United States)

    Richter, D.H.; Donaldson, D.E.; Lamarre, R.A.

    1973-01-01

    The Soda Creek springs are a group of small, cold mineral springs on the southern flank of the eastern Alaska Range. The spring waters contain anomalous concentrations of carbon dioxide, sodium, chlorine, sulfate, boron, and ammonia and are actively precipitating deposits of calcite and aragonite. Sparingly present in these deposits are mixed-layer illite-montmorillonite clays and zeolite minerals. Low-temperaturemetamorphic reactions in subjacent marine sedimentary rocks of Jurassic and Cretaceous age may have produced the fluids and silicate minerals. With only a few exceptions, cool bicarbonate-rich springs in Alaska are concentrated south of the Denali fault system in south-central Alaska, southeastern Alaska, and along the Kaltag-Tintina fault system. These areas are characterized by active or recently activetectonism, major faults and folds, and an abundance of marine sedimentary rocks.

  14. Radioactivity measurement in spring waters of Cantabria, Spain

    International Nuclear Information System (INIS)

    Soto Torres, J.; Gomez Arozamena, J.

    1999-01-01

    A study of the radioactivity existing in a high number of springs located in Cantabria, Northern Spain, was made. The spring analyzed in three sampling campaign's, And alpha and beta total activities and 226 Ra and 222 Rn concentrations were determined for each sample. The measuring techniques employed were gamma spectrometry with Ge detector, counting with gas flow proportional counter, and counting with ZnS(Ag) scintillating detector. Results show that springs with high radon water concentration have high values respect to the national mean. The springs with the highest radium and radon levels have thermal waters and are located on two deep fault, those have historic seismicity and seismical and geomorphological evidences of recent tectonic activity

  15. Topology Counts: Force Distributions in Circular Spring Networks.

    Science.gov (United States)

    Heidemann, Knut M; Sageman-Furnas, Andrew O; Sharma, Abhinav; Rehfeldt, Florian; Schmidt, Christoph F; Wardetzky, Max

    2018-02-09

    Filamentous polymer networks govern the mechanical properties of many biological materials. Force distributions within these networks are typically highly inhomogeneous, and, although the importance of force distributions for structural properties is well recognized, they are far from being understood quantitatively. Using a combination of probabilistic and graph-theoretical techniques, we derive force distributions in a model system consisting of ensembles of random linear spring networks on a circle. We show that characteristic quantities, such as the mean and variance of the force supported by individual springs, can be derived explicitly in terms of only two parameters: (i) average connectivity and (ii) number of nodes. Our analysis shows that a classical mean-field approach fails to capture these characteristic quantities correctly. In contrast, we demonstrate that network topology is a crucial determinant of force distributions in an elastic spring network. Our results for 1D linear spring networks readily generalize to arbitrary dimensions.

  16. NEFSC 2000 Spring Bottom Trawl Survey (AL0002, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of the cruise are to: (1) determine the spring distribution and relative abundance of fish and selected invertebrate species; (2) collect biological...

  17. NEFSC 2001 Spring Bottom Trawl Survey (AL0103, EK500)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of the cruise are to: (1) determine the spring distribution and relative abundance of fish and selected invertebrate species; (2) collect biological...

  18. Mapping of groundwater spring potential zone using geospatial ...

    Indian Academy of Sciences (India)

    9

    geographical information system and remote sensing with various ... integration of RS and GIS and multi-criteria decision-making techniques, .... terrain factor contains the S (spring) before taking a class of terrain factor (F) into account and its.

  19. Taking minutes of meetings

    CERN Document Server

    Gutmann, Joanna

    2016-01-01

    aking Minutes of Meetings guides you through the entire process behind minute taking: arranging the meeting; writing the agenda; creating the optimum environment; structuring the meeting and writing notes up accurately. The minute-taker is one of the most important and powerful people in a meeting and you can use this opportunity to develop your knowledge, broaden your horizons and build credibility within the organization. Taking Minutes of Meetings is an easy to read 'dip-in, dip-out' guide which shows you how to confidently arrange meetings and produce minutes. It provides hands-on advice about the sections of a meeting as well as tips on how to create an agenda, personal preparation, best practice advice on taking notes and how to improve your accuracy. Brand new chapters of this 4th edition include guidance on using technology to maximize effectiveness and practical help with taking minutes for a variety of different types of meetings. The creating success series of books... With over one million copi...

  20. CMS MANAGEMENT MEETINGS

    CERN Multimedia

    2010-01-01

    The Agendas and Minutes of the Management Board meetings are accessible to CMS members at: http://indico.cern.ch/categoryDisplay.py?categId=223 The Agendas and Minutes of the Collaboration Board meetings are accessible to CMS members at: http://indico.cern.ch/categoryDisplay.py?categId=174

  1. CMS MANAGEMENT MEETINGS

    CERN Multimedia

    The Agendas and Minutes of the Management Board meetings are accessible to CMS members at: http://indico.cern.ch/categoryDisplay.py?categId=223  The Agendas and Minutes of the Collaboration Board meetings are accessible to CMS members at: http://indico.cern.ch/categoryDisplay.py?categId=174 

  2. Air and Space Power Journal-Spring 2016

    Science.gov (United States)

    2016-01-01

    and military became interested in aviation for defensive purposes (e.g., concern over Japanese hostilities) and offers details about initial...Spring 2016 | 99 Book Reviews Empire. He finds that ace was invented in the late 1920s by cinema and that such a term would have been considered...In the real Pacific War, Japanese - Spring 2016 | 101 Book Reviews Americans were interned in camps, and a largely homogeneous American people fought

  3. School of Culinary Arts & Food Technology - Spring Newsletter 2017

    OpenAIRE

    Murphy, James Peter

    2017-01-01

    The School of Culinary Arts and Food Technology, Spring Newsletter captured the many events, research, awards, significant contributions and special civic and community activities which the students and staff members of the school have successfully completed leading up to the Spring period of 2017. The successful completion of these activities would not be possible without the active and on-going support of the 'INSPIRED' friends of Culinary Arts (sponsors).

  4. Winter chilling speeds spring development of temperate butterflies.

    Science.gov (United States)

    Stålhandske, Sandra; Gotthard, Karl; Leimar, Olof

    2017-07-01

    Understanding and predicting phenology has become more important with ongoing climate change and has brought about great research efforts in the recent decades. The majority of studies examining spring phenology of insects have focussed on the effects of spring temperatures alone. Here we use citizen-collected observation data to show that winter cold duration, in addition to spring temperature, can affect the spring emergence of butterflies. Using spatial mixed models, we disentangle the effects of climate variables and reveal impacts of both spring and winter conditions for five butterfly species that overwinter as pupae across the UK, with data from 1976 to 2013 and one butterfly species in Sweden, with data from 2001 to 2013. Warmer springs lead to earlier emergence in all species and milder winters lead to statistically significant delays in three of the five investigated species. We also find that the delaying effect of winter warmth has become more pronounced in the last decade, during which time winter durations have become shorter. For one of the studied species, Anthocharis cardamines (orange tip butterfly), we also make use of parameters determined from previous experiments on pupal development to model the spring phenology. Using daily temperatures in the UK and Sweden, we show that recent variation in spring temperature corresponds to 10-15 day changes in emergence time over UK and Sweden, whereas variation in winter duration corresponds to 20 days variation in the south of the UK versus only 3 days in the south of Sweden. In summary, we show that short winters delay phenology. The effect is most prominent in areas with particularly mild winters, emphasising the importance of winter for the response of ectothermic animals to climate change. With climate change, these effects may become even stronger and apply also at higher latitudes. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  5. Investigation about Role of Algae in Kazeroon Sasan Spring Odor

    Directory of Open Access Journals (Sweden)

    A Hamzeian

    2016-05-01

    Full Text Available Introduction: As odor for potable water is unpleasant for costumers, it needs to do researches for finding the reasons of odorous water. Sasan spring that is located in, near kazeroon city, Fars, Iran, is potable water resource for Kazeroon and Booshehr city and many other villages. Water in Sasan spring has the odor problem. With regards to important   role of algae on ado r problems in this study the role of algae on   odor was investigated. Methods: After regular sampling, the TON (threshold odor number was indicated and algae species was distinguished and the number of total algae and any species  of algae was numbers by microscopic direct numbering method .as the algae mass  is related to nitrogen and phosphor concentration, results of concentration Of nitrogen and phosphor in this spring that was examined regularity by water company was investigated and compared to concentration of these component that are need for algae growing.   Results: results shows that TON was in range  of 4.477 to 6.2 that indicated  oderous limit . Regression and diagram between TON and number of total algae showed the linear relationship. The concentration of nitrogen and phosphor, showed adequate condition for algal grow. Result of determination of algae species showed high population of Oscilatoria and Microcystis species, which are known as essential case of mold odor in water resources. Investigation on geological maps in the region around the Sasan spring, show alluvium source and is effected by surface part of it’s around land. Conclusion: because of the algae was determined as the essential cause of odor   in the spring, and algal growth is related to nutrients, and because of the surface pollution can penetrate in the alluvium lands around the spring, and effect the water in spring, so nutrient control and management is the essential way for odor control in the spring.

  6. Development of alternative materials for BWR fuel springs

    International Nuclear Information System (INIS)

    Uruma, Y.; Osato, T.; Yamazaki, K.

    2002-01-01

    Major sources of radioactivity introduced into reactor water of BWR were estimated fuel crud and in-core materials (especially, fuel springs). Fuel springs are used for fixation of fuel cladding tubes with spacer grid. Those are small parts (total length is only within 25 mm) and so many numbers are loaded simultaneously and then total surfaces area are calculated up to about 200 m 2 . Fuel springs are located under high radiation field and high oxidative environment. Conventional fuel spring is made of alloy-X750 which is one of nickel-based alloy and is reported to show relatively higher corrosion release rate. 58 Co and 60 Co will be released directly into reactor water from intensely radio-activated fuel springs surface and increase radioactivity concentrations in primary coolant. Corrosion release control from fuel springs is an important technical item and a development of alternative material instead of alloy-X750 for fuel spring is a key subject to achieve ultra low man-rem exposure BWR plant. In present work, alloy-X718 which started usage for PWR fuel springs and stainless steel type 316L which has many mechanical property data are picked up for alternative materials and compared their corrosion behaviors with conventional material. Corrosion experiment was conducted under vapor-water two phases flow which is simulated fuel cladding surface boiling condition. After exposure, corrosion film formed under corrosion test was analyzed in detail and corrosion film amount and corrosion release amount are estimated among three materials. (authors)

  7. Compacted cancellous bone has a spring-back effect

    DEFF Research Database (Denmark)

    Kold, S; Bechtold, JE; Ding, Ming

    2003-01-01

    A new surgical technique, compaction, has been shown to improve implant fixation. It has been speculated that the enhanced implant fixation with compaction could be due to a spring-back effect of compacted bone. However, such an effect has yet to be shown. Therefore we investigated in a canine mo....... Thus we found a spring-back effect of compacted bone, which may be important for increasing implant fixation by reducing initial gaps between the implant and bone....

  8. Green Team Readies for Spring with Plant Swap | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer Those looking for a cost-effective way to spruce up their yards this spring can stop by the National Cancer Institute at Frederick Green Team’s booth during the Spring Research Festival (SRF) on May 7 and 8. Pick up a free plant, donate overgrown plants from your yard, or swap for a new plant. Everyone is invited to participate in the swap, whether you have plants to donate or not.

  9. Yakima River Spring Chinook Enhancement Study, 1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fast, David E.

    1991-05-01

    The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system. 47 refs., 89 figs., 67 tabs.

  10. Study of the Behavior of Some Spring Barley Lines with Two Rows Created at A.R.D.S Turda Regarding Production Capacity and Quality

    Directory of Open Access Journals (Sweden)

    Ioana PORUMB

    2017-05-01

    Full Text Available The spring barley is a variety of a superior quality for brewing compared with the feed barley due to several reasons. Research was conducted in the field of breeding of spring barley with two rows, within ARDS Turda, during 2013-2015. The trials were comparatively developed, and included 25 variants. The biological material was represented by four  autochthonous genotypes: Turdeana, Daciana Romaniţa (A.R.D.S. Turda, and Adina (A.R.D.S. Suceava. The spring barley lines created by the S.C.D.A. Turda, meet the requirements of the beer industry in terms of protein content, starch, M.M.B. and germination energy.

  11. Experimental and numerical investigations of shape memory alloy helical springs

    International Nuclear Information System (INIS)

    Aguiar, Ricardo A A; Pacheco, Pedro M C L; Savi, Marcelo A

    2010-01-01

    Shape memory alloys (SMAs) belong to the class of smart materials and have been used in numerous applications. Solid phase transformations induced either by stress or temperature are behind the remarkable properties of SMAs that motivate the concept of innovative smart actuators for different purposes. The SMA element used in these actuators can assume different forms and a spring is an element usually employed for this aim. This contribution deals with the modeling, simulation and experimental analysis of SMA helical springs. Basically, a one-dimensional constitutive model is assumed to describe the SMA thermomechanical shear behavior and, afterwards, helical springs are modeled by considering a classical approach for linear-elastic springs. A numerical method based on the operator split technique is developed. SMA helical spring thermomechanical behavior is investigated through experimental tests performed with different thermomechanical loadings. Shape memory and pseudoelastic effects are treated. Numerical simulations show that the model results are in close agreement with those obtained by experimental tests, revealing that the proposed model captures the general thermomechanical behavior of SMA springs

  12. The saltiest springs in the Sierra Nevada, California

    Science.gov (United States)

    Moore, James G.; Diggles, Michael F.; Evans, William C.; Klemic, Karin

    2017-07-20

    The five saltiest springs in the Sierra Nevada in California are found between 38.5° and 38.8° N. latitude, on the South Fork American River; on Caples Creek, a tributary of the Silver Fork American River; and on the North Fork Mokelumne River. The springs issue from Cretaceous granitic rocks in the bottoms of these major canyons, between 1,200- and 2,200-m elevation. All of these springs were well known to Native Americans, who excavated meter-sized basins in the granitic rock, within which they produced salt by evaporation near at least four of the five spring sites. The spring waters are dominated by Cl, Na, and Ca; are enriched relative to seawater in Ca, Li, and As; and are depleted in SO4, Mg, and K. Tritium analyses indicate that the spring waters have had little interaction with rainfall since about 1954. The waters are apparently an old groundwater of meteoric origin that resided at depth before moving up along fractures to the surface of the exhumed granitic rocks. However, along the way these waters incorporated salts from depth, the origin of which could have been either from marine sedimentary rocks intruded by the granitic magmas or from fluid inclusions in the granitic rocks. Prolonged storage at depth fostered water-rock interactions that undoubtedly modified the fluid compositions.

  13. The false spring of 2012, earliest in North American record

    Science.gov (United States)

    Ault, T.R.; Henebry, G.M.; de Beurs, K. M.; Schwartz, M.D.; Betancourt, Julio L.; Moore, David

    2013-01-01

    Phenology - the study of recurring plant and animal life cycle stages, especially their timing and relationships with weather and climate - is becoming an essential tool for documenting, communicating, and anticipating the consequences of climate variability and change. For example, March 2012 broke numerous records for warm temperatures and early flowering in the United States [Karl et al., 2012; Elwood et al., 2013]. Many regions experienced a “false spring,” a period of weather in late winter or early spring sufficiently mild and long to bring vegetation out of dormancy prematurely, rendering it vulnerable to late frost and drought.As global climate warms, increasingly warmer springs may combine with the random climatological occurrence of advective freezes, which result from cold air moving from one region to another, to dramatically increase the future risk of false springs, with profound ecological and economic consequences [e.g., Gu et al., 2008; Marino et al., 2011; Augspurger, 2013]. For example, in the false spring of 2012, an event embedded in long-term trends toward earlier spring [e.g., Schwartz et al., 2006], the frost damage to fruit trees totaled half a billion dollars in Michigan alone, prompting the federal government to declare the state a disaster area [Knudson, 2012].

  14. Habitat features and distribution of Salamandra salamandra in underground springs

    Directory of Open Access Journals (Sweden)

    Raoul Manenti

    2009-12-01

    Full Text Available Subterranean habitats are among the less known terrestrial habitats, but can reveal an unexpected biodiversity, and can play an underestimated role for amphibians. The fire salamander Salamandra salamandra is sometimes found in underground environments, but the factors affecting its distribution in subterranean spaces remain substantially unexplored. We repeatedly surveyed some hypogeous springs, such as draining galleries and “bottini” in NW Italy, in order to evaluate the relationship between environmental features and distribution of S. salamandra in these underground springs. We performed visual encounter surveys to assess the occurrence of larvae, juveniles or adults in springs. We also recorded four habitat variables: easy of access, isolation, macrobenthos richness and forest cover of the surrounding landscape. We used generalized linear models to evaluate the relationships between habitat features and occurrence of larvae. We observed larvae of S. salamandra in 13 out of 22 springs; their presence was associated to springs with high easy of access and with relatively rich macrobenthos communities. In underground springs, larval development apparently required longer time than in nearby epigeous streams. Nevertheless, S. salamandra can attain metamorphosis in this environment. The occurrence of S. salamandra in underground environments was not accidental, but repeated in the time and interesting from an ecological point of view, confirming the high plasticity of the species.

  15. In Vivo Force Decay of Niti Closed Coil Springs

    Science.gov (United States)

    Cox, Crystal; Nguyen, Tung; Koroluk, Lorne; Ko, Ching-Chang

    2014-01-01

    Introduction Nickel-titanium (NiTi) closed coil springs are purported to deliver constant forces over extended ranges of activation and working times. In vivo studies supporting this claim are limited. The objective of this study is to evaluate changes in force decay properties of NiTi closed coil springs after clinical use. Methods Pseudoelastic force-deflection curves for 30 NiTi coil springs (used intra-orally) and 15 matched laboratory control springs (simulated intra-oral conditions - artificial saliva, 37°C) were tested pre- and post-retrieval via Dynamic Mechanical Analysis (DMA) and the Instron machine, respectively, to evaluate amount of force loss and hysteresis change following 4, 8, or 12 weeks of working time (n=10 per group). Effect of the oral environment and clinical use on force properties were evaluated by comparing in vivo and in vitro data. Results The springs studied showed a statistically significant decrease in force (~12%) following 4 weeks of clinical use (pspace closure at an average rate of 0.91mm per month was still observed despite this decrease in force. In vivo and in vitro force loss data were not statistically different. Conclusions NiTi closed coil springs do not deliver constant forces when used intra-orally, but they still allow for space closure rates of ~1mm/month. PMID:24703289

  16. The Dynamic Characteristic and Hysteresis Effect of an Air Spring

    Science.gov (United States)

    Löcken, F.; Welsch, M.

    2015-02-01

    In many applications of vibration technology, especially in chassis, air springs present a common alternative to steel spring concepts. A design-independent and therefore universal approach is presented to describe the dynamic characteristic of such springs. Differential and constitutive equations based on energy balances of the enclosed volume and the mountings are given to describe the nonlinear and dynamic characteristics. Therefore all parameters can be estimated directly from physical and geometrical properties, without parameter fitting. The numerically solved equations fit very well to measurements of a passenger car air spring. In a second step a simplification of this model leads to a pure mechanical equation. While in principle the same parameters are used, just an empirical correction of the effective heat transfer coefficient is needed to handle some simplification on this topic. Finally, a linearization of this equation leads to an analogous mechanical model that can be assembled from two common spring- and one dashpot elements in a specific arrangement. This transfer into "mechanical language" enables a system description with a simple force-displacement law and a consideration of the nonobvious hysteresis and stiffness increase of an air spring from a mechanical point of view.

  17. Report on the FY 1998 survey for preservation of Jozankei Hot Spring. Hot spring variation survey; 1998 nendo Jozankei onsen hozen chosa. Onsen hendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    Of the FY 1998 survey for preservation of Jozankei Hot Spring, a survey was conducted with the aim of grasping the state of variation in ingredients of hot spring, etc. in the area and of elucidating the causes of hot spring variation. During the period from October 27, 1998 to August 28, 1999, the following were carried out: sampling of specimens of spring water at 6 spring sources, river water at 2 points and precipitation at 2 points; measurement of temperature, spring temperature, pH, electric conductivity, etc.; analyses of Na, Ca, CL, HCO{sub 3}, SiO{sub 2}, etc. The results of the analysis are as follows. As to spring sources, A-2, A-7 and B-1, the precipitation or river water flow rate seem to largely affect the variation in hot spring measuring values. As to spring resources, A-6 and B-4, the relation with the precipitation or river water flow rate is not clear, but a big change is recognized in the snow-melting season. The tendency to the two variations seems to be caused by the difference between the spring with which the river water is greatly concerned by the crack system of the spring having reached the river and the spring which was closed on the earth surface. The temperature variation of springs was considered to be affected by the river water which flowed into the springs. (NEDO)

  18. Wolfcampian brachiopods from the Bird Spring Group, Wamp Spring area, Las Vegas Range, Clark County, Nevada ( USA).

    Science.gov (United States)

    Mills, P.C.; Langenheim, R.L.

    1987-01-01

    The Wamp Spring section of the Bird Spring Group is subdivided into a basal platy limestone member, lower cliff-forming member, and upper cliff-forming member. Triticites, Schwagerina, and Schubertella kingi in the platy limestone member indicate an early Wolfcampian age. Schwagerina, Schubertella kingi, and a distinctive assemblage of brachiopods, similar to the West Texas fauna, indicate that the upper cliff-forming member is late Wolfcampian. The lower cliff-forming member is tentatively assigned to the middle Wolfcampian. The Wamp Spring sequence correlates temporally with the BSe 'formation' of the Bird Spring Group. The fossil-rich upper cliff-forming limestone member includes the new species Pontisia boodi, Crurithyris wampensis, and Calliprotonia(?) n. sp. A, as well as Hustedia culcitula, Crenispirifer(?) sp., Cenorhynchia(?) sp., Kutorginella(?) sp., marginiferids, lyssacine hexactinellid sponges, pleurotomarid and bellerophontid gastropods, cidaroid echinoids, rugose corals, cylindrical cryptostome bryozoans, and nuculids. -from Authors

  19. Buildings radiological characterization report for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-04-01

    This report summarizes radiological characterization data on the Weldon Spring Chemical Plant (WSCP) buildings gathered as part of five previous investigations, and provides a consistent will be used to support future feasibility studies which will determine the best available technologies for ultimate disposition of the buildings and associated equipment. At present no structure or piece of equipment can be released from the WSCP for unrestricted use without further radiation measurements being performed. A final group of equipment and building components contains surface radioactivity levels in excess of DOE guidelines; this group, usually found in buildings housing uranium and/or thorium processing equipment, will require decontamination and comprehensive scanning in order to be considered for unrestricted use release. 9 refs., 44 tabs

  20. Proposed plan for the management of bulk wastes at the Weldon Spring quarry, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-02-01

    This proposed plan addresses the management of contaminated bulk wastes at the Weldon Spring quarry. Activities at the site are being conducted by the US Department of Energy under its Surplus Facilities Management Program. A remedial investigation/feasibility study has been prepared in accordance with requirements of the Comprehensive Environmental Response. The purposes of the proposed plan are to present a notice and brief analysis of the proposed quarry bulk waste remedial action, describe the remedial action alternatives for this interim remedial action, identify the currently preferred alternative for managing the bulk wastes and present the rationale for this preference, serve as a companion document to the RI/FS and administrative record file for this action, and outline the public's role in the decision-making process for this action. 2 figs., 4 tabs