Symmetries for SM Alignment in multi-Higgs Doublet Models

CERN Document Server

Pilaftsis, Apostolos

2016-01-01

We derive the complete set of maximal symmetries for Standard Model (SM) alignment that may occur in the tree-level scalar potential of multi-Higgs Doublet Models, with $n > 2$ Higgs doublets. Our results generalize the symmetries of SM alignment, without decoupling of large mass scales or fine-tuning, previously obtained in the context of two-Higgs Doublet Models.

CP violation conditions in N-Higgs-doublet potentials

International Nuclear Information System (INIS)

Nishi, C. C.

2006-01-01

Conditions for CP violation in the scalar potential sector of general N-Higgs-doublet models are analyzed from a group theoretical perspective. For the simplest two-Higgs-doublet model potential, a minimum set of conditions for explicit and spontaneous CP violation is presented. The conditions can be given a clear geometrical interpretation in terms of quantities in the adjoint representation of the basis transformation group for the two doublets. Such conditions depend on CP-odd pseudoscalar invariants. When the potential is CP invariant, the explicit procedure to reach the real CP-basis and the explicit CP transformation can also be obtained. The procedure to find the real basis and the conditions for CP violation are then extended to general N-Higgs-doublet model potentials. The analysis becomes more involved and only a formal procedure to reach the real basis is found. Necessary conditions for CP invariance can still be formulated in terms of group invariants: the CP-odd generalized pseudoscalars. The problem can be completely solved for three Higgs-doublets

Vacuum stability in neutrinophilic Higgs doublet model

International Nuclear Information System (INIS)

Haba, Naoyuki; Horita, Tomohiro

2011-01-01

A neutrinophilic Higgs model has tiny vacuum expectation value (VEV), which can naturally explain tiny masses of neutrinos. There is a large energy scale hierarchy between a VEV of the neutrinophilic Higgs doublet and that of usual standard model-like Higgs doublet. In this Letter we at first analyze vacuum structures of Higgs potential in both supersymmetry (SUSY) and non-SUSY neutrinophilic Higgs models, and next investigate a stability of this VEV hierarchy against radiative corrections. We will show that the VEV hierarchy is stable against radiative corrections in both Dirac neutrino and Majorana neutrino scenarios in both SUSY and non-SUSY neutrinophilic Higgs doublet models.

Titanium gettering in Doublet III

International Nuclear Information System (INIS)

de Grassie, J.S.; Callis, R.; Campbell, G.

1980-08-01

The application of mild titanium gettering in the Doublet III tokamak has led to a significant improvement in the obtainable operating regimes and discharge parameters for all of the many plasma cross-sectional shapes studied. With gettering, low-Z impurities and radiated power are greatly reduced. The maximum line averaged electron density has increased 50% (anti n/sub e max/ approx. 1 x 10 20 /m 3 ), corresponding to a Murakami coefficient of nearly 6

A model for quasi parity-doublet spectra with strong coriolis mixing

International Nuclear Information System (INIS)

Minkov, N.; Drenska, S.; Strecker, M.

2013-01-01

The model of coherent quadrupole and octupole motion (CQOM) is combined with the reflection-asymmetric deformed shell model (DSM) in a way allowing fully microscopic description of the Coriolis decoupling and K-mixing effects in the quasi parity-doublet spectra of odd-mass nuclei. In this approach the even-even core is considered within the CQOM model, while the odd nucleon is described within DSM with pairing interaction. The Coriolis decoupling/mixing factors are calculated through a parity-projection of the single-particle wave function. Expressions for the Coriolis mixed quasi parity-doublet levels are obtained in the second order of perturbation theory, while the K-mixed core plus particle wave function is obtained in the first order. Expressions for the B(E1), B(E2) and B(E3) reduced probabilities for transitions within and between different quasi-doublets are obtained by using the total K-mixed wave function. The model scheme is elaborated in a form capable of describing the yrast and non-yrast quasi parity-doublet spectra in odd-mass nuclei. (author)

Structural insights into microtubule doublet interactions inaxonemes

Energy Technology Data Exchange (ETDEWEB)

Downing, Kenneth H.; Sui, Haixin

2007-06-06

Coordinated sliding of microtubule doublets, driven by dynein motors, produces periodic beating of the axoneme. Recent structural studies of the axoneme have used cryo-electron tomography to reveal new details of the interactions among some of the multitude of proteins that form the axoneme and regulate its movement. Connections among the several sets of dyneins, in particular, suggest ways in which their actions may be coordinated. Study of the molecular architecture of isolated doublets has provided a structural basis for understanding the doublet's mechanical properties that are related to the bending of the axoneme, and has also offered insight into its potential role in the mechanism of dynein activity regulation.

Higgs boson couplings in multi-doublet models with natural flavour conservation

Directory of Open Access Journals (Sweden)

Kei Yagyu

2016-12-01

Full Text Available We investigate the deviation in the couplings of the standard model (SM like Higgs boson (h with a mass of 125 GeV from the prediction of the SM in multi-doublet models within the framework where flavour changing neutral currents at the tree level are naturally forbidden. After we present the general expressions for the modified gauge and Yukawa couplings for h, we show the correlation between the deviation in the Yukawa coupling for the tau lepton hτ+τ− and that for the bottom quark hbb¯ under the assumption of a non-zero deviation in the hVV (V=W,Z couplings in two Higgs doublet models (2HDMs and three Higgs doublet models (3HDMs as simple examples. We clarify the possible allowed prediction of the deviations in the 3HDMs which cannot be explained in the 2HDMs even taking into account the one-loop electroweak corrections to the Yukawa coupling.

The broad Brillouin doublet and CP of KTaO3, second sound vs. Two-phonon difference scattering

International Nuclear Information System (INIS)

Farhi, E.; Tagantsev, A.K.; Hehlen, B.; Courtens, E.; Boatner, L.A.

1999-01-01

Complete text of publication follows. Low-T Brillouin spectra of the incipient ferroelectric KTaO 3 exhibit a broad central peak (CP) (1), and some additional broad Brillouin doublet (BD) (2), that can both relate to phonon-density fluctuations (3). Starting from extensive new high resolution neutron scattering measurements in pure crystals, low lying phonon sheets were modelled in the central part of Brillouin zone. Such a parameterisation was then used in order to analyse those up-mentioned unusual features in teens of two-phonon mechanisms (4). Numerical evaluations show that transverse acoustic (TA) phonons whose normal damping is faster than the BD frequency (Γ DB > ω DB ) may produce hydrodynamic second sound (propagation of heat). Moreover, two-phonon difference scattering from low damping thermal TA phonons ((Γ DB DB ) can contribute to the spectra with either a sharp or a broader BD, depending on the phonon group velocity and phonon-sheet anisotropy. The position of the doublet is consistent with both mechanisms, but comparing the computed anisotropies with experimental Brillouin and neutron scattering data, one favours the second process. (author)

Classification of finite reparametrization symmetry groups in the three-Higgs-doublet model

International Nuclear Information System (INIS)

Ivanov, Igor P.; Vdovin, E.

2013-01-01

Symmetries play a crucial role in electroweak symmetry breaking models with non-minimal Higgs content. Within each class of these models, it is desirable to know which symmetry groups can be implemented via the scalar sector. In N-Higgs-doublet models, this classification problem was solved only for N=2 doublets. Very recently, we suggested a method to classify all realizable finite symmetry groups of Higgs-family transformations in the three-Higgs-doublet model (3HDM). Here, we present this classification in all detail together with an introduction to the theory of solvable groups, which play the key role in our derivation. We also consider generalized-CP symmetries, and discuss the interplay between Higgs-family symmetries and CP-conservation. In particular, we prove that presence of the Z 4 symmetry guarantees the explicit CP-conservation of the potential. This work completes classification of finite reparametrization symmetry groups in 3HDM. (orig.)

Enhanced nuclear magnetic resonance in a non-magnetic cubic doublet

International Nuclear Information System (INIS)

Veenendaal, E.J.

1982-01-01

In this thesis two lanthanide compounds are studied which show enhanced nuclear magnetism at low temperatures: Rb 2 NaHoF 6 and CsNaHoF 6 . Chapter II gives a description of the 4 He-circulating refrigerator, which was built to provide the low temperatures required for the polarization of the enhanced nuclear moments. This type of dilution refrigerator was chosen because of its simple design and large cooling power. Chapter III is devoted to a comparison of the different types of dilution refrigerators. A theoretical discussion is given of their performance, starting from the differential equations, which govern the temperature distribution in the refrigerator. In chapter IV the actual performance of the refrigerator, described in chapter II is discussed. In chapter V a description of the NMR-apparatus, developed for very-low-temperature NMR experiments is given. In chapter VI experimental results on the compound Rb 2 NaHoF 6 are presented. The CEF-ground state of this compound is probably the non-magnetic doublet GAMMA 3 , but at a temperature of 170 K a structural phase transition lowers the crystal symmetry from cubic to tetragonal and the doublet is split into two singlets. In chapter VII specific heat, (enhanced) nuclear magnetic resonance and magnetization measurements on the compound Cs 2 NaHoF 6 are presented which also has a GAMMA 3 -doublet ground state. In zero magnetic field the degeneracy of the doublet is removed at a temperature of 393 mK, where a phase transition is induced by quadrupolar interactions. (Auth.)

Emulsion sheet doublets as interface trackers for the OPERA experiment

International Nuclear Information System (INIS)

Anokhina, A; Aoki, S; Ariga, A; Arrabito, L; Autiero, D; Brugiere, T; Chaussard, L; Badertscher, A; Bay, F; Greggio, F Bersani; Bertolin, A; Besnier, M; Bick, D; Bozza, C; Brugnera, R; Carrara, E; Brunetti, G; Buontempo, S; Cazes, A; Chernyavsky, M

2008-01-01

New methods for efficient and unambiguous interconnection between electronic position sensitive detectors and target units based on nuclear photographic emulsion films have been developed. The application to the OPERA experiment, that aims at detecting ν μ ν τ oscillations in the CNGS neutrino beam, is reported in this paper. In order to reduce background due to latent tracks collected before installation in the detector, on-site large-scale treatments of the emulsions (''refreshing'') have been applied. Changeable Sheet (CSd) packages, each made of a doublet of emulsion films, have been designed, assembled and coupled to the OPERA target units (''ECC bricks''). A device has been built to print X-ray spots for accurate interconnection both within the CSd and between the CSd and the related ECC brick. Sample emulsion films have been extensively scanned with state-of-the-art automated optical microscopes. Efficient track-matching and powerful background rejection have been achieved in tests with electronically tagged penetrating muons. Further improvement of in-doublet film alignment was obtained by matching the pattern of low-energy electron tracks. The commissioning of the overall OPERA alignment procedure is in progress

Multi-Higgs doublet models: physical parametrization, sum rules and unitarity bounds

Science.gov (United States)

Bento, Miguel P.; Haber, Howard E.; Romão, J. C.; Silva, João P.

2017-11-01

If the scalar sector of the Standard Model is non-minimal, one might expect multiple generations of the hypercharge-1/2 scalar doublet analogous to the generational structure of the fermions. In this work, we examine the structure of a Higgs sector consisting of N Higgs doublets (where N ≥ 2). It is particularly convenient to work in the so-called charged Higgs basis, in which the neutral Higgs vacuum expectation value resides entirely in the first Higgs doublet, and the charged components of remaining N - 1 Higgs doublets are mass-eigenstate fields. We elucidate the interactions of the gauge bosons with the physical Higgs scalars and the Goldstone bosons and show that they are determined by an N × 2 N matrix. This matrix depends on ( N - 1)(2 N - 1) real parameters that are associated with the mixing of the neutral Higgs fields in the charged Higgs basis. Among these parameters, N - 1 are unphysical (and can be removed by rephasing the physical charged Higgs fields), and the remaining 2( N - 1)2 parameters are physical. We also demonstrate a particularly simple form for the cubic interaction and some of the quartic interactions of the Goldstone bosons with the physical Higgs scalars. These results are applied in the derivation of Higgs coupling sum rules and tree-level unitarity bounds that restrict the size of the quartic scalar couplings. In particular, new applications to three Higgs doublet models with an order-4 CP symmetry and with a Z_3 symmetry, respectively, are presented.

The impact of reduction of doublet well spacing on the Net Present Value and the life time of fluvial Hot Sedimentary Aquifer doublets

NARCIS (Netherlands)

Willems, C.J.L.; Maghami Nick, Hamidreza M.; Bruhn, D.F.

This paper evaluates the impact of reduction of doublet well spacing, below the current West Netherlands Basin standard of 1000 to 1500 m, on the Net Present Value (NPV) and the life time of fluvial Hot Sedimentary Aquifer (HSA) doublets. First, a sensitivity analysis is used to show the possible

Doublet Tracer Testing in Klamath Falls, Oregon

Energy Technology Data Exchange (ETDEWEB)

Gudmundsson, J S; Johnson, S E; Horne, R N; Jackson, P B [Pet. Eng. Dept., Stanford University; Culver, G G [Geo-Heat Center, Oregon Institute of Technology, Klamath Falls, OR

0000-12-30

A tracer test was carried out in a geothermal doublet system to study the injection behavior of a developed reservoir known to be fractured. The doublet produces about 320 gpm of 160 degrees Fahrenheit water that is used for space heating and then injected; the wells are spaced 250 ft apart. Tracer breakthrough was observed in 2 hours and 45 minutes in the production well, indicating fracture flow. However, the tracer concentrations were low and indicated porous media flow; the tracers mixed with a reservoir volume much larger than a fracture.

Doublet Tracer Testing in Klamath Falls, Oregon

Energy Technology Data Exchange (ETDEWEB)

Gudmundsson, J.S.; Johnson, S.E.; Horne, R.N.; Jackson, P. B. [Pet. Eng. Dept., Stanford University; Culver, G.G. [Geo-Heat Center, Oregon Institute of Technology, Klamath Falls, OR

0001-01-01

A tracer test was carried out in a geothermal doublet system to study the injection behavior of a developed reservoir known to be fractured. The doublet produces about 320 gpm of 160 degrees Fahrenheit water that is used for space heating and then injected; the wells are spaced 250 ft apart. Tracer breakthrough was observed in 2 hours and 45 minutes in the production well, indicating fracture flow. However, the tracer concentrations were low and indicated porous media flow; the tracers mixed with a reservoir volume much larger than a fracture.

Optimization of an electrostatic quadrupole doublet focusing systems

Energy Technology Data Exchange (ETDEWEB)

Hussein, Oday A., E-mail: oah@sc.nahrainuniv.edu.iq [Department of Physics, College of Science, Al-Nahrain University, Baghdad (Iraq); Sise, Omer [Department of Science Education, Faculty of Education, Suleyman Demirel University, Isparta (Turkey)

2017-05-15

Highlights: • The imaging properties of an electrostatic quadrupole doublet lens were analyzed with the aid of computer simulation. • The optimal electrode voltages which lead to stigmatic image in both planes of the quadrupole doublet lens with minimum spot size at position sensitive detector (PSD) were found for two operation modes: point-to-point focusing and parallel-to-point focusing. • The imaging properties of are very sensitive to the lunching angle of the electron-beam. - Abstract: The imaging properties of an electrostatic quadrupole doublet lens were analyzed with the aid of computer simulation. The optimal electrode voltages which lead to stigmatic image in both planes of the quadrupole doublet lens with minimum spot size at position sensitive detector (PSD) were found for two operation modes: point-to-point focusing and parallel-to-point focusing. The optical properties as: Magnifications, spot sizes in the image plane and aberration figures were discussed. The results showed that the focusing of the lens was strong in the xy-plane in comparison with the focusing in the xz-plane. The distortion of the image was greater when the image position will be close to the lens in comparison with object position. Also, the imaging properties were very sensitive to the lunching angle of the electron-beam.

The inelastic scattering of 2Pi [case (b)] molecules and an understanding of the differing Λ doublet propensities for molecules of π vs π3 orbital occupancy

International Nuclear Information System (INIS)

Dagdigian, P.J.; Alexander, M.H.; Liu, K.; Department of Chemistry, University of Maryland, College Park, Maryland 20742; Gas Phase Chemical Dynamics Group, Chemistry Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439)

1989-01-01

The quantum formalism for the scattering of a diatomic molecule in a 2 Pi electronic state which is well described by Hund's case (b) limit is investigated here. For a particular JF/sub i/ yields J'F'/sub 1/ transition, quantum interference effects will lead to preferential population of one of the final state Λ doublet levels. The nonstatistical population of final state Λ doublet levels arises from an interference between terms in the expansion of the two electrostatic potential energy surfaces, of A' and A'' reflection symmetry, which describe the interaction between a molecule in a Pi electronic state and a closed-shell partner. The particular Λ doublet level preferred is opposite for molecules of π 1 vs π 3 electron occupancy. The physical origin of this reversal in the Λ doublet propensity is a direct reflection of the fact that for the former the A' potential surface is more repulsive since the sole π electron lies in the triatomic plane in this case, whereas for molecules of π 3 electron occupancy the A' surface is less repulsive than the A'' surface since for the A' surface only one of the three π electrons lies in the triatomic plane. The magnitude of these Λ doublet propensities is illustrated by calculated cross sections for the CH(X 2 Pi)--He system using the ab initio potential energy surfaces calculated by the Argonne theoretical group, and these cross sections are compared to those of the crossed molecular study of Liu and Macdonald [J. Chem. Phys. 61, xxxx (1989)]. A similar analysis is carried out for collisions of a molecule of π 3 electron occupancy and is illustrated by inelastic collisions of OH(X 2 Pi)

Doublet III beamline: as-built

International Nuclear Information System (INIS)

Harder, C.R.; Holland, M.M.; Parker, J.W.; Gunn, J.; Resnick, L.

1980-03-01

In order to fully exploit Doublet III capabilities and to study new plasma physics regimes, a Neutral Beam Injector System has been constructed. Initially, a two beamline system will supply 7 MW of heat to the plasma. The system is currently being expanded to inject approx. 20 MW of power (6 beamlines). Each beamline is equipped with two Lawrence Berkeley Laboratory type rectangular ion sources with 10 cm x 40 cm extraction grids. These sources will accelerate hydrogen ions to 80 keV, with extracted beam currents in excess of 80 A per source expected. The first completed source is currently being tested and conditioned on the High Voltage Test Stand at Lawrence Livermore Laboratory. This paper pictorially reviews the as-built Doublet III neutral beamline with emphasis on component relation and configuration relative to spatial and source imposed design constraints

Isomer shifts of the octupole doublet in muonic 207Pb

International Nuclear Information System (INIS)

Budick, B.; Anigstein, R.; Kast, J.W.

1980-01-01

Isomer shifts in the doublet 5/2 + , 7/2 + levels in muonic 207 Pb have been measured. The shifts are essentially the same as in the core 3 - collective state. They support the hypothesis that the octupole vibration does not conserve volume. (orig.)

Chiral doublet bands in odd-A nuclei 103,105Rh

International Nuclear Information System (INIS)

Qi Bin; Wang Shouyu; Zhang Shuangquan; Meng Jie

2010-01-01

Spontaneous chiral symmetry breaking is a phenomenon of general interest in chemistry, biology and particle physics. Since the pioneering work of nuclear chirality in 1997 [1] , much effort has been devoted to further explore this interesting phenomenon. Following the observation of chiral doublet bands in N = 75 isotones [2] more candidates have been reported over more than 20 nuclei experimentally in A∼100, 130 and 190 mass regions including odd-odd, odd-A and even-even nuclei. However, the identification and the intrinsic mechanism of candidate chiral doublet bands are still under debate. Although various versions of particle rotor model (PRM) and titled axis cranking model (TAC) had been applied to study chiral bands, the essential starting point for understanding their properties is based on the ideal picture, i.e. one particle and one hole coupled with a γ = 30 rigid triaxial rotor. On the other hand, from the investigation of semiclassical TAC based on the mean field, it is shown that the chiral doublet bands in the real nuclei are not always consistent with the static chirality, but mixed with the character of dynamic chirality. Thus it is necessary to construct a fully quantal model for the description of chiral doublet bands in the real nuclei, which is aimed to understand the properties of chiral doublet bands in real nuclei, and to present clearly the picture and character of chiral motion [3] . Recently, we have developed the multi-particle multi-hole coupled with the triaxial rotor model, which is able to describe the nuclear rotation related to many valence nucleons. Adopting this model, chirality in odd-A nuclei 103,105 Rh with πg 9/2 -1 ⊗νh 11/2 2 configuration and in odd-A nucleus 135 Nd with πh 11/2 2 ⊗νh 11/2 1 configuration [4] are studied in a fully quantal approach. For the chiral doublet bands, the observed energies and the B(M1) and B(E2) values are reproduced very well. Root mean square values of the angular momentum components

Spectral features of the tunneling-induced transparency and the Autler-Townes doublet and triplet in a triple quantum dot.

Science.gov (United States)

Luo, Xiao-Qing; Li, Zeng-Zhao; Jing, Jun; Xiong, Wei; Li, Tie-Fu; Yu, Ting

2018-02-15

We theoretically investigate the spectral features of tunneling-induced transparency (TIT) and Autler-Townes (AT) doublet and triplet in a triple-quantum-dot system. By analyzing the eigenenergy spectrum of the system Hamiltonian, we can discriminate TIT and double TIT from AT doublet and triplet, respectively. For the resonant case, the presence of the TIT does not exhibit distinguishable anticrossing in the eigenenergy spectrum in the weak-tunneling regime, while the occurrence of double anticrossings in the strong-tunneling regime shows that the TIT evolves to the AT doublet. For the off-resonance case, the appearance of a new detuning-dependent dip in the absorption spectrum leads to double TIT behavior in the weak-tunneling regime due to no distinguished anticrossing occurring in the eigenenergy spectrum. However, in the strong-tunneling regime, a new detuning-dependent dip in the absorption spectrum results in AT triplet owing to the presence of triple anticrossings in the eigenenergy spectrum. Our results can be applied to quantum measurement and quantum-optics devices in solid systems.

Derivative interactions and perturbative UV contributions in N Higgs doublet models

Energy Technology Data Exchange (ETDEWEB)

Kikuta, Yohei [KEK Theory Center, KEK, Tsukuba (Japan); The Graduate University for Advanced Studies, Department of Particle and Nuclear Physics, Tsukuba (Japan); Yamamoto, Yasuhiro [Universidad de Granada, Deportamento de Fisica Teorica y del Cosmos, Facultad de Ciencias and CAFPE, Granada (Spain)

2016-05-15

We study the Higgs derivative interactions on models including arbitrary number of the Higgs doublets. These interactions are generated by two ways. One is higher order corrections of composite Higgs models, and the other is integration of heavy scalars and vectors. In the latter case, three point couplings between the Higgs doublets and these heavy states are the sources of the derivative interactions. Their representations are constrained to couple with the doublets. We explicitly calculate all derivative interactions generated by integrating out. Their degrees of freedom and conditions to impose the custodial symmetry are discussed. We also study the vector boson scattering processes with a couple of two Higgs doublet models to see experimental signals of the derivative interactions. They are differently affected by each heavy field. (orig.)

Scalar production in models with 1 and 2 Higgs doublets

International Nuclear Information System (INIS)

Campos Carvalho, F.L. de.

1991-03-01

A standard electroweak interaction model is studied based on the introduction of an additional scalar doublet which rises two neutral scalars, one pseudoscalar and two charged scalars. The doublet introduction gives the possibility to implement constraints issued by the supersymmetry, restricting therefore those scalar masses. (L.C.J.A.)

Two-Higgs-doublet-portal dark-matter models in light of direct search and LHC data

Energy Technology Data Exchange (ETDEWEB)

Chang, Chia-Feng [Department of Physics and Center for Theoretical Sciences, National Taiwan University,No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan (China); He, Xiao-Gang [Department of Physics and Center for Theoretical Sciences, National Taiwan University,No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan (China); INPAC, Department of Physics and Astronomy, Shanghai Jiao Tong University,800 Dongchuan Rd., Minhang, Shanghai 200240 (China); Physics Division, National Center for Theoretical Sciences,No. 101, Sec. 2, Kuang Fu Rd., Hsinchu 300, Taiwan (China); Tandean, Jusak [Department of Physics and Center for Theoretical Sciences, National Taiwan University,No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan (China); Physics Division, National Center for Theoretical Sciences,No. 101, Sec. 2, Kuang Fu Rd., Hsinchu 300, Taiwan (China)

2017-04-19

We explore simple Higgs-portal models of dark matter (DM) with spin 1/2, 3/2, and 1, respectively, applying to them constraints from the LUX and PandaX-II direct detection experiments and from LHC measurements on the 125-GeV Higgs boson. With only one Higgs doublet, we find that the spin-1/2 DM having a purely scalar effective coupling to the doublet is viable only in a narrow range of mass near the Higgs pole, whereas the vector DM is still allowed if its mass is also close to the Higgs pole or exceeds 1.4 TeV, both in line with earlier analyses. Moreover, the spin-3/2 DM is in a roughly similar situation to the spin-1/2 DM, but has surviving parameter space which is even more restricted. We also consider the two-Higgs-doublet extension of each of the preceding models, assuming that the expanded Yukawa sector is that of the two-Higgs-doublet model of type II. We show that in these two-Higgs-doublet-portal models significant portions of the DM mass regions excluded in the simplest scenarios by direct search bounds can be reclaimed due to suppression of the effective DM interactions with nucleons at some ratios of the CP-even Higgs bosons’ couplings to the up and down quarks. The regained parameter space contains areas which can yield a DM-nucleon scattering cross-section that is far less than its current experimental limit or even goes below the neutrino-background floor.

New final doublets and power densities for the international linear ...

Indian Academy of Sciences (India)

Abstract. In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the international linear collider and reduce the power losses. The result is a set of three new final doublet layouts with improved beam transport properties. The effect of localised power deposition and ...

The possible mass region for shears bands and chiral doublets

Energy Technology Data Exchange (ETDEWEB)

Meng, J [Institute of Physical and Chemical Research, Wako, Saitama (Japan); Frauendorf, S

1998-03-01

The Tilted Axis Cranking (TAC) theory is reviewed. The recent progress of TAC for triaxial deformed nuclei is reported. More emphasis has been paid to the new discovered phenomena - chiral doublets and their explanation. The possible mass region for the shears bands and chiral doublets and their experimental signature are discussed. (author)

Temporal changes of the inner core from waveform doublets

Science.gov (United States)

Yang, Y.; Song, X.

2017-12-01

Temporal changes of the Earth's inner core have been detected from earthquake waveform doublets (repeating sources with similar waveforms at the same station). Using doublets from events up to the present in the South Sandwich Island (SSI) region recorded by the station COLA (Alaska), we confirmed systematic temporal variations in the travel time of the inner-core-refracted phase (PKIKP, the DF branch). The DF phase arrives increasingly earlier than outer core phases (BC and AB) by rate of approximately 0.07 s per decade since 1970s. If we assume that the temporal change is caused by a shift of the lateral gradient from the inner core rotation as in previous studies, we estimate the rotation rate of 0.2-0.4 degree per year. We also analyzed the topography of the inner core boundary (ICB) using SSI waveform doublets recorded by seismic stations in Eurasia and North America with reflected phase (PKiKP) and refracted phases. There are clear temporal changes in the waveforms of doublets for PKiKP under Africa and Central America. In addition, for doublets recorded by three nearby stations (AAK, AML, and UCH), we observed systematic change in the relative travel time of PKiKP and PKIKP. The temporal change of the (PKiKP - PKIKP) differential time is always negative for the event pairs if both events are before 2007, while it fluctuates to positive if the later event occurs after 2007. The rapid temporal changes in space and time may indicate localized processes (e.g., freezing and melting) of the ICB in the recent decades under Africa. We are exploring 4D models consistent with the temporal changes.

Two-Higgs-doublet models with Minimal Flavour Violation

International Nuclear Information System (INIS)

Carlucci, Maria Valentina

2010-01-01

The tree-level flavour-changing neutral currents in the two-Higgs-doublet models can be suppressed by protecting the breaking of either flavour or flavour-blind symmetries, but only the first choice, implemented by the application of the Minimal Flavour Violation hypothesis, is stable under quantum corrections. Moreover, a two-Higgs-doublet model with Minimal Flavour Violation enriched with flavour-blind phases can explain the anomalies recently found in the ΔF = 2 transitions, namely the large CP-violating phase in B s mixing and the tension between ε K and S ψKS .

Material failures observed in Doublet III neutral beamlines

International Nuclear Information System (INIS)

Bailey, E.W.; Colleraine, A.; Doll, D.; Grunloh, H.; Kim, J.; Langhorn, A.; Thurgood, B.

1983-12-01

The Doublet III neutral beam injectors consist of three separable spools two meters in diameter by four meters long overall when assembled. Contained within these spools are the neutralizers, ion dumps, deflecting magnet, calorimeter dumps, cryogenic panels and beam scraping collimators 3,7. To date three beamlines are in operation on Doublet III, and the beams have accumulated operating time of approximately 32 months, with the oldest having been in operation for 18 months. During this time operation of DIII with the neutral beam sources has demonstrated the following: 7.8 MW injected neutrals from three beamlines (6 sources), high β (4.5%), and non-circular plasma shape. The sources have also exhibited a very reliable injected shot history 4, 5, 6, 8. Material failures encountered during the operation of DIII N.B. injectors and the solutions to these failures are described. Failures include cracking of the neutralizer exit collimator due to heating cycles, failure of cyropanel support rods due to cooling cycles, failure of the sliding drive of the moveable calorimeter due to friction

Effective Field Theory with Two Higgs Doublets

CERN Document Server

Crivellin, Andreas; Procura, Massimiliano

2016-01-01

In this article we extend the effective field theory framework describing new physics effects to the case where the underlying low-energy theory is a Two-Higgs-Doublet model. We derive a complete set of independent operators up to dimension six assuming a $Z_2$-invariant CP-conserving Higgs potential. The effects on Higgs and gauge boson masses, mixing angles in the Higgs sector as well as couplings to fermions and gauge bosons are computed. At variance with the case of a single Higgs doublet, we find that pair production of SM-like Higgses, arising through dimension-six operators, is not fixed by fermion-fermion-Higgs couplings and can therefore be sizable.

Doublet III neutral beam injector test tank cryopanel design

International Nuclear Information System (INIS)

Doll, D.W.; Kamperschroer, J.H.; Arend, P.V.

1980-03-01

A simple condensing cryopanel has been designed for the Doublet III neutral beam test tank with a 320,000 liters per second pumping capacity for hydrogen. This maintains a vacuum in the test tank which simulates the Doublet III vessel, 1.3 x 10 -3 Pa (approx.10 -5 torr). The hydrogen gas load comes from the beam striking the test tank calorimeter and amounts to about 7.2 torr liters per second. The cryopanel is cylindrical shaped with a liquid helium (LHe) surface that pumps through liquid nitrogen (LN) cooled aluminum chevrons located in squirrel-cage fashion around the inside surface of the cylinder. The LHe cooled surface is a smooth cylinder 2.09m in diameter by .69m long with LHe flowing in a approx. 1mm annular space between concentric cylinders. The chevrons which are not blackened are cooled from each end with LN flowing in ring manifolds that serve as the primary cryopanel structure. The LHe is force fed at 55.2 kPa remaining in the liquid phase through the panel. External heat exchanger capability permits use of helium at 3.8 to 4.2 0 K. Normal operating flow rate is 1.4 g/sec for a heat load expected to be 12.2 W total

Doublet III neutral beam multi-stream command language system

International Nuclear Information System (INIS)

Campbell, L.; Garcia, J.R.

1983-01-01

A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer. The two tasks, the interactive and the sequencer, run independently and communicate using shared memory regions. The compiler runs as an overlay to the interactive task when so directed by operator commands. The system is succesfully being used to operate the three neutral beams on Doublet III

An evaluation of interferences in heat production from low enthalpy geothermal doublets systems

DEFF Research Database (Denmark)

Willems, Cees J. L.; Nick, Hamidreza M.; Weltje, Gert Jan

2017-01-01

Required distance between doublet systems in low enthalpy geothermal heat exploitation is often not fully elucidated. The required distance aims to prevent negative interference influencing the utilisation efficiency of doublet systems. Currently production licence areas are often issued based...... and minimal required production temperature. The results of this study can be used to minimize negative interference or optimise positive interference aiming at improving geothermal doublet deployment efficiency. (C) 2017 The Authors. Published by Elsevier Ltd....

Self-Sustained Oscillatory Sliding Movement of Doublet Microtubules and Flagellar Bend Formation.

Directory of Open Access Journals (Sweden)

Sumio Ishijima

Full Text Available It is well established that the basis for flagellar and ciliary movements is ATP-dependent sliding between adjacent doublet microtubules. However, the mechanism for converting microtubule sliding into flagellar and ciliary movements has long remained unresolved. The author has developed new sperm models that use bull spermatozoa divested of their plasma membrane and midpiece mitochondrial sheath by Triton X-100 and dithiothreitol. These models enable the observation of both the oscillatory sliding movement of activated doublet microtubules and flagellar bend formation in the presence of ATP. A long fiber of doublet microtubules extruded by synchronous sliding of the sperm flagella and a short fiber of doublet microtubules extruded by metachronal sliding exhibited spontaneous oscillatory movements and constructed a one beat cycle of flagellar bending by alternately actuating. The small sliding displacement generated by metachronal sliding formed helical bends, whereas the large displacement by synchronous sliding formed planar bends. Therefore, the resultant waveform is a half-funnel shape, which is similar to ciliary movements.

Application of an array processor to the analysis of magnetic data for the Doublet III tokamak

International Nuclear Information System (INIS)

Wang, T.S.; Saito, M.T.

1980-08-01

Discussed herein is a fast computational technique employing the Floating Point Systems AP-190L array processor to analyze magnetic data for the Doublet III tokamak, a fusion research device. Interpretation of the experimental data requires the repeated solution of a free-boundary nonlinear partial differential equation, which describes the magnetohydrodynamic (MHD) equilibrium of the plasma. For this particular application, we have found that the array processor is only 1.4 and 3.5 times slower than the CDC-7600 and CRAY computers, respectively. The overhead on the host DEC-10 computer was kept to a minimum by chaining the complete Poisson solver and free-boundary algorithm into one single-load module using the vector function chainer (VFC). A simple time-sharing scheme for using the MHD code is also discussed

CP violation in the two-doublet Higgs sector of the MSSM

International Nuclear Information System (INIS)

Akhmetzyanova, Eh.N.; Dolgopolov, M.V.; Dubinin, M.N.

2006-01-01

Models with extended two-doublet Higgs sector are discussed in view of using their particular features to find out which sources of CP violation could take place in nature. It is considered the effective two-Higgs-doublet potential with complex parameters, when the CP invariance is broken both explicitly and spontaneously. For case of the two-doublet Higgs sector of the minimal supersymmetric model, when CP invariance is violated by the interactions of Higgs fields with the third generation of scalar quarks, the Higgs bosons mass spectrum in the case of maximal CP mixing is calculated which is significantly different from CP-conserving case. The phenomenological consequences for the Higgs mass spectrum in the decoupling regime and for the strong mixing case are considered [ru

ATLAS diboson excesses from the stealth doublet model

Directory of Open Access Journals (Sweden)

Wei Chao

2016-02-01

Full Text Available The ATLAS Collaboration has reported excesses in diboson invariant mass searches of new resonances around 2 TeV, which might be a prediction of new physics around that mass range. We interpret these results in the context of a modified stealth doublet model where the extra Higgs doublet has a Yukawa interaction with the first generation quarks, and show that the heavy CP-even Higgs boson can naturally explain the excesses in the WW and ZZ channels with a small Yukawa coupling, ξ∼0.15, and a tiny mixing angle with the SM Higgs boson, α∼0.05. Furthermore, the model satisfies constraints from colliders and electroweak precision measurements.

Strong electron correlation in photoionization of spin-orbit doublets

International Nuclear Information System (INIS)

Amusia, M.Ya.; Chernysheva, L.V.; Manson, S.T.; Msezane, A.M.; Radojevic, V.

2002-01-01

A new and explicitly many-body aspect of the 'leveraging' of the spin-orbit interaction is demonstrated, spin-orbit activated interchannel coupling, which can significantly alter the photoionization cross section of a spin-orbit doublet. As an example, it is demonstrated via a modified version of the spin-polarized random phase approximation with exchange, that a recently observed unexplained structure in the Xe 3d 5/2 photoionization cross section [A. Kivimaeki et al., Phys. Rev. A 63, 012716 (2000)] is entirely due to this effect. Similar features are predicted for Cs 3d 5/2 and Ba 3d 5/2

A search for close-mass lepton doublet

International Nuclear Information System (INIS)

Riles, J.K.

1989-04-01

Described is a search for a heavy charged lepton with an associated neutrino of nearly the same mass, together known as a close-mass lepton doublet. The search is conducted in e + e/sup/minus// annihilation data taken with the Mark II detector at a center-of-mass energy of 29 GeV. In order to suppress contamination from conventional two-photon reactions, the search applies a novel, radiative-tagging technique. Requiring the presence of an isolated, energetic photon allows exploration for lepton doublets with a mass splitting smaller than that previously accessible to experiment. No evidence for such a new lepton has been found, enabling limits to be placed on allowed mass combinations. Mass differences as low as 250-300 MeV are excluded for charged lepton masses up to 10 GeV. 78 refs., 64 figs., 8 tabs

H2-broadening, shifting and mixing coefficients of the doublets in the ν2 and ν4 bands of PH3 at room temperature

Science.gov (United States)

Salem, Jamel; Blanquet, Ghislain; Lepère, Muriel; Younes, Rached ben

2018-05-01

The broadening, shifting and mixing coefficients of the doublet spectral lines in the ν2 and ν4 bands of PH3 perturbed by H2 have been determined at room temperature. Indeed, the collisional spectroscopic parameters: intensities, line widths, line shifts and line mixing parameters, are all grouped together in the collisional relaxation matrix. To analyse the collisional process and physical effects on spectra of phosphine (PH3), we have used the measurements carried out using a tunable diode-laser spectrometer in the ν2 and ν4 bands of PH3 perturbed by hydrogen (H2) at room temperature. The recorded spectra are fitted by the Voigt profile and the speed-dependent uncorrelated hard collision model of Rautian and Sobelman. These profiles are developed in the studies of isolated lines and are modified to account for the line mixing effects in the overlapping lines. The line widths, line shifts and line mixing parameters are given for six A1 and A2 doublet lines with quantum numbers K = 3n, (n = 1, 2, …) and overlapped by collisional broadening at pressures of less than 50 mbar.

Beta and current limits in the Doublet III tokamak

International Nuclear Information System (INIS)

Strait, E.J.; Chu, M.S.; Jahns, G.L.

1986-04-01

Neutral-beam heated discharges in Doublet III exhibit an operational beta limit, β/sub T/(%) less than or equal to 3.5 I(MA)/a(m)B(T), in good agreement with several theoretical predictions for ideal external kink or ballooning modes. These theories predict that the β limit has no explicit dependence on plasma shape (for nominal dee shapes). This aspect of the theory was confirmed in Doublet III by varying the elongation (kappa) from 1.0 to 1.6 and the triangularity (delta) from -0.1 to 0.9 and finding in all cases the same β limit. The maximum achievable beta thus depends on the minimum achievable value of the safety factor q. In Doublet III, the operational current limit is given by q greater than or equal to 1.7 for limiter-defined discharges and q greater than or equal to 2.7 for separatrix-defined discharges. Operation with q approx.2 was achieved for 1.0 less than or equal to kappa less than or equal to 1.6. Both β and q limits are characterized by major disruptions which usually terminate the discharge. In both cases, the disruptions often have a precursor oscillation with toroidal mode number n = 1, poloidal mode number m = 2 or 3, a frequency of zero to a few kHz, and a growth time on the order of a millisecond. These observations suggest that the proximate cause of these disruptions is a kink or tearing mode, pressure-driven in one case and current-driven in the other. Theoretical analyses of discharges at both limits will be compared. Modes with a high toroidal mode number, 3 less than or equal to n less than or equal to 5, and ballooning character have been observed near the β/sub T/ limit. These modes do not appear to be closely connected with the disruptions. Heating efficiency, ΔW/ΔP, remains constant up to the limiting disruption. Fishbone modes appear to be mainly a feature of high β/sub p/ operation and not connected to the β/sub T/ limit

Vector boson fusion in the inert doublet model

Science.gov (United States)

Dutta, Bhaskar; Palacio, Guillermo; Restrepo, Diego; Ruiz-Álvarez, José D.

2018-03-01

In this paper we probe the inert Higgs doublet model at the LHC using vector boson fusion (VBF) search strategy. We optimize the selection cuts and investigate the parameter space of the model and we show that the VBF search has a better reach when compared with the monojet searches. We also investigate the Drell-Yan type cuts and show that they can be important for smaller charged Higgs masses. We determine the 3 σ reach for the parameter space using these optimized cuts for a luminosity of 3000 fb-1 .

Doublet III neutral beam multi-stream command language system

International Nuclear Information System (INIS)

Campbell, L.; Garcia, J.R.

1983-12-01

A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer

Sizable NSI from the SU(2){sub L} scalar doublet-singlet mixing and the implications in DUNE

Energy Technology Data Exchange (ETDEWEB)

Forero, David V. [Center for Neutrino Physics, Virginia Tech,Blacksburg, VA, 24061 (United States); Huang, Wei-Chih [Fakultät für Physik, Technische Universität Dortmund,Dortmund, 44221 (Germany)

2017-03-03

We propose a novel and simple mechanism where sizable effects of non-standard interactions (NSI) in neutrino propagation are induced from the mixing between an electrophilic second Higgs doublet and a charged singlet. The mixing arises from a dimensionful coupling of the scalar doublet and singlet to the standard model Higgs boson. In light of the small mass, the light mass eigenstate from the doublet-singlet mixing can generate much larger NSI than those induced by the heavy eigenstate. We show that a sizable NSI ε{sub eτ} (∼0.3) can be attained without being excluded by a variety of experimental constraints. Furthermore, we demonstrate that NSI can mimic effects of the Dirac CP phase in the neutrino mixing matrix but they can potentially be disentangled by future long-baseline neutrino experiments, such as the Deep Underground Neutrino Experiment (DUNE).

Physiological consequences of doublet discharges on motoneuronal firing and motor unit force

Directory of Open Access Journals (Sweden)

Włodzimierz eMrówczyński

2015-03-01

Full Text Available The double discharges are observed at the onset of contractions of mammalian motor units (MUs, especially during their recruitment to strong or fast movements. Doublets lead to MU force increase and improve ability of muscles to maintain high force during prolonged contractions. In this review we discuss an ability to produce doublets by fast and slow motoneurons (MNs, their influence on the course of action potential afterhyperpolarization as well as its role in modulation of the initial stage of the firing pattern of MNs. In conclusion, a generation of doublets is an important strategy of motor control, responsible for fitting the motoneuronal firing rate to the optimal for MUs at the start of their contraction, necessary for increment of muscle force.

The inert doublet model: a new archetype of WIMP dark matter?

International Nuclear Information System (INIS)

Tytgat, M Hg

2008-01-01

The Inert Doublet Model (IDM) is a two doublet extension of the Higgs-Brout-Englert sector of the Standard Model with a Z2 symmetry in order to prevent FCNC. If the Z2 symmetry is not spontaneously broken, the lightest neutral extra scalar is a dark matter candidate. We briefly review the phenomenology of the model, emphasizing its relevance for the issue of Electroweak Symmetry Breaking (EWSB) and the prospects for detection of dark matter

Scalar dark matter in leptophilic two-Higgs-doublet model

Science.gov (United States)

Bandyopadhyay, Priyotosh; Chun, Eung Jin; Mandal, Rusa

2018-04-01

Two-Higgs-Doublet Model of Type-X in the large tan ⁡ β limit becomes leptophilic to allow a light pseudo-scalar A and thus provides an explanation of the muon g - 2 anomaly. Introducing a singlet scalar dark matter S in this context, one finds that two important dark matter properties, nucleonic scattering and self-annihilation, are featured separately by individual couplings of dark matter to the two Higgs doublets. While one of the two couplings is strongly constrained by direct detection experiments, the other remains free to be adjusted for the relic density mainly through the process SS → AA. This leads to the 4τ final states which can be probed by galactic gamma ray detections.

THE Na 8200 Å DOUBLET AS AN AGE INDICATOR IN LOW-MASS STARS

International Nuclear Information System (INIS)

Schlieder, Joshua E.; Simon, Michal; Lépine, Sébastien; Rice, Emily; Fielding, Drummond; Tomasino, Rachael

2012-01-01

We investigate the use of the gravity sensitive neutral sodium (Na I) doublet at 8183 Å and 8195 Å (Na 8200 Å doublet) as an age indicator for M dwarfs. We measured the Na doublet equivalent width (EW) in giants, old dwarfs, young dwarfs, and candidate members of the β Pic moving group using medium-resolution spectra. Our Na 8200 Å doublet EW analysis shows that the feature is useful as an approximate age indicator in M-type dwarfs with (V – K s ) ≥ 5.0, reliably distinguishing stars older and younger than 100 Myr. A simple derivation of the dependence of the Na EW on temperature and gravity supports the observational results. An analysis of the effects of metallicity shows that this youth indicator is best used on samples with similar metallicity. The age estimation technique presented here becomes useful in a mass regime where traditional youth indicators are increasingly less reliable, is applicable to other alkali lines, and will help identify new low-mass members in other young clusters and associations.

Scalable UWB photonic generator based on the combination of doublet pulses.

Science.gov (United States)

Moreno, Vanessa; Rius, Manuel; Mora, José; Muriel, Miguel A; Capmany, José

2014-06-30

We propose and experimentally demonstrate a scalable and reconfigurable optical scheme to generate high order UWB pulses. Firstly, various ultra wideband doublets are created through a process of phase-to-intensity conversion by means of a phase modulation and a dispersive media. In a second stage, doublets are combined in an optical processing unit that allows the reconfiguration of UWB high order pulses. Experimental results both in time and frequency domains are presented showing good performance related to the fractional bandwidth and spectral efficiency parameters.

Near-threshold photoionization of the Xe 3d spin-orbit doublet: Relativistic, relaxation, and intershell interaction effects

International Nuclear Information System (INIS)

Radojevic, V.; Davidovic, D.M.; Amusia, M.Ya.

2003-01-01

Results of calculations of the near-threshold photoionization of the xenon 3d spin-orbit doublet are reported. Our theoretical analysis is undertaken in order to interpret and enlighten the very detailed measurements of this process [A. Kivimaeki et al., Phys. Rev. A 63, 012716 (2001)], which revealed a previously unobserved interesting feature--an additional broad maximum--in the partial xenon 3d 5/2 cross section. This double maximum was not produced by earlier calculations, except in the recent study by Amusia et al. [Phys. Rev. Lett. 88, 093002 (2002)], which, in contrast to the present one, is not ab initio and relativistic in character. The partial photoionization cross sections of 3d 5/2 and 3d 3/2 subshells, photoelectron anisotropy parameters, and spin-polarization parameters that were so far not studied either experimentally or theoretically are calculated. Many-electron correlations, relativistic effects, and relaxation effects of the ionic core in the ionization process are taken into account by using the relativistic random-phase approximation, modified to include the relaxation of the considered subshell

Microanalytical techniques applied to phase identification and measurement of solute redistribution at the solid/liquid interface of frozen Fe-4.3Ni doublets

CERN Document Server

Faryna, M; Okane, T

2002-01-01

A Fe-4.3M alloy has been solidified directionally by using the Bridgman system. The solidification conditions were chosen to obtain an oriented cellular structure of delta-ferrite. These are: a positive temperature gradient of about 60 K/cm and a growth rate of 6.6 mu m/s. A change in these conditions can lead either to the formation of austenite or to the competitive growth of delta-ferrite/gamma-austenite. The solid/liquid interface of delta-ferrite cells has been frozen and double instability has been revealed at the tip of the cells. The instability is described as the first harmonic wave of fundamental undulation, which appeared at the formerly planar solid/liquid interface. This means that a doublet structure is formed only with the imposed specific conditions of solidification. The Ni-solute redistribution after back-diffusion has been measured across the delta-ferrite doublet. Results of energy dispersive x-ray (EDX) measurements on the distribution of Ni and Fe correspond well to the theoretical pred...

Emulsion sheet doublets as interface trackers for the OPERA experiment

CERN Document Server

Anokhina, A.; Ariga, A.; Arrabito, L.; Autiero, D.; Badertscher, A.; Bay, F.; Greggio, F.Bersani; Bertolin, A.; Besnier, M.; Bick, D.; Bozza, C.; Brugiere, T.; Brugnera, R.; Brunetti, G.; Buontempo, S.; Carrara, E.; Cazes, A.; Chaussard, L.; Chernyavsky, M.; Chiarella, V.; Chon-Sen, N.; Chukanov, A.; Consiglio, L.; Cozzi, M.; Cuha, V.; Dal Corso, F.; D'Amato, G.; D'Ambrosio, N.; De Lellis, G.; Declais, Y.; De Serio, M.; Di Capua, F.; Di Ferdinando, D.; Di Giovanni, A.; Di Marco, N.; Di Troia, C.; Dmitrievski, S.; Dominjon, A.; Dracos, Marcos; Duchesneau, D.; Dusini, S.; Ebert, J.; Egorov, O.; Enikeev, R.; Ereditato, Antonio; Esposito, L.S.; Favier, J.; Felici, G.; Ferber, T.; Fini, R.; Frekers, D.; Fukuda, T.; Galkin, V.I.; Galkin, V.A.; Garfagnini, A.; Giacomelli, G.; Giorgini, M.; Goellnitz, C.; Goldberg, J.; Golubkov, D.; Gornushkin, Y.; Grella, G.; Grianti, F.; Guler, M.; Gusev, G.; Gustavino, C.; Hagner, Caren; Hara, T.; Hierholzer, M.; Hiramatsu, S.; Hoshino, Kaoru; Ieva, M.; Jakovcic, K.; Janicsko Csathy, J.; Janutta, B.; Jollet, C.; Juget, F.; Kawai, T.; Kazuyama, M.; Kim, S.H.; Knuesel, J.; Kodama, K.; Komatsu, M.; Kose, U.; Kreslo, I.; Laktineh, I.; Lazzaro, C.; Lenkeit, J.; Ljubicic, A.; Longhin, Andrea; Lutter, G.; Manai, K.; Mandrioli, G.; Marotta, A.; Marteau, J.; Matsuo, T.; Matsuoka, H.; Mauri, N.; Meisel, F.; Meregaglia, A.; Messina, M.; Migliozzi, P.; Mikado, S.; Miyamoto, S.; Monacelli, Piero; Morishima, Kunihiro; Moser, U.; Muciaccia, Maria Teresa; Naganawa, N.; Naka, T.; Nakamura, M.; Nakamura, T.; Nakano, T.; Nikitina, V.; Niwa, K.; Nonoyama, Y.; Ogawa, S.; Osedlo, V.; Ossetski, D.; Paoloni, A.; Park, B.D.; Park, I.G.; Pastore, A.; Patrizii, L.; Pennacchio, E.; Pessard, H.; Pilipenko, V.; Pistillo, C.; Polukhina, N.; Pozzato, M.; Pretzl, Klaus P.; Publichenko, P.; Pupilli, F.; Roganova, T.; Rosa, G.; Rostovtseva, I.; Rubbia, A.; Russo, A.; Ryazhskaya, O.; Ryzhikov, D.; Sato, O.; Sato, Y.; Saveliev, V.; Sazhina, G.; Schembri, A.; Scotto Lavina, L.; Shibuya, H.; Simone, S.; Sioli, Max; Sirignano, C.; Sirri, G.; Song, J.S.; Spinetti, M.; Stanco, L.; Starkov, N.; Stipcevic, M.; Strauss, T.; Strolin, Paolo Emilio; Sugonyaev, V.; Taira, Y.; Takahashi, S.; Tenti, M.; Terranova, F.; Tezuka, I.; Tioukov, V.; Tolun, P.; Tsarev, V.; Tufanli, S.; Ushida, N.; Vilain, P.; Vladimirov, M.; Votano, L.; Vuilleumier, J.L.; Wilquet, G.; Wonsak, B.; Wurtz, J.; Yoon, C.S.; Yoshida, J.; Zaitsev, Y.; Zemskova, S.; Zghiche, Amina; Zimmermann, R.

2008-01-01

New methods for efficient and unambiguous interconnection between electronic counters and target units based on nuclear photographic emulsion films have been developed. The application to the OPERA experiment, that aims at detecting oscillations between mu neutrino and tau neutrino in the CNGS neutrino beam, is reported in this paper. In order to reduce background due to latent tracks collected before installation in the detector, on-site large-scale treatments of the emulsions ("refreshing") have been applied. Changeable Sheet (CSd) packages, each made of a doublet of emulsion films, have been designed, assembled and coupled to the OPERA target units ("ECC bricks"). A device has been built to print X-ray spots for accurate interconnection both within the CSd and between the CSd and the related ECC brick. Sample emulsion films have been extensively scanned with state-of-the-art automated optical microscopes. Efficient track-matching and powerful background rejection have been achieved in tests with electronic...

Operator-generated command language for computer control of Doublet III

International Nuclear Information System (INIS)

Drobnis, D.; Petersen, P.

1982-02-01

The Control System for Doublet III consists of a medium-sized minicomputer system, with several keyboards and color alphanumeric CRTs for interactive operator interface to a large distributed CAMAC I/O system. Under normal operating conditions, however, all of the sequential and decision-making operations necessary to prepare each tokamak shot are performed directly by the computer, executing a set of Procedures coded in a convenient command language. Most of these Procedures have been developed by the Doublet III operators themselves, and are maintained, altered, and augmented as required without programmer attention. In effect, the Procedures have become a high-level tokamak Command Language

The Doublet III neutral beam injector cryosystem

International Nuclear Information System (INIS)

Langhorn, A.R.

1984-01-01

This chapter describes neutral beam injection into the Doublet III tokamak for plasma heating experiments. Cryopanels employed in the beamline vacuum pumping system are force flow cooled to 3.8 K by a closed loop refrigeration system. Topics considered include beamline description, cryosystem description, system characteristics, and operational history. Evaluation of the first beamline was carried out using a 25 L/h liquefier and a unique reliquefaction heat exchanger to permit subatmospheric operation and panel flow rates of 140 L/h. The system was upgraded for three beamline operation by substitution of a 100 L/h liquefier and more cryogen storage capacity. It is concluded that the cryosystem gives stable operation of three beamline cryopanel arrays with little operator intervention

Reference peak method for analysis of doublets in gamma-ray spectrometry used in neutron activation analysis

International Nuclear Information System (INIS)

Wasek, M.; Cichowlas, A.; Sterlinski, S.; Dybczynski, R.

2000-01-01

A simple algebraic method for the quantitative analysis of doublets in gamma-ray spectra from HPGe detectors is presented. The calculation algorithm is accomplished using the Microsoft Excel program. The method does not require any assumptions regarding the shape of the peaks in the spectrum. The possibilities of quantitative analysis of doublets of various intensity ration and separation of ots components are discussed in detail. The practical examples proved the usefulness the method also for the analysis of the closed doublets. (author)

THE Na 8200 Angstrom-Sign DOUBLET AS AN AGE INDICATOR IN LOW-MASS STARS

Energy Technology Data Exchange (ETDEWEB)

Schlieder, Joshua E.; Simon, Michal [Department of Physics and Astronomy, Stony Brook University, Stony Brook, NY 11794 (United States); Lepine, Sebastien; Rice, Emily [Department of Astrophysics, American Museum of Natural History, Central Park West at 79th Street, New York, NY 10024 (United States); Fielding, Drummond [Department of Physics and Astronomy, Johns Hopkins University, 366 Bloomberg Center, 3400 North Charles Street, Baltimore, MD 21218 (United States); Tomasino, Rachael, E-mail: michal.simon@stonybrook.edu, E-mail: schlieder@mpia-hd.mpg.de, E-mail: lepine@amnh.org, E-mail: erice@amnh.org, E-mail: dfieldi1@jhu.edu, E-mail: tomas1r@cmich.edu [Department of Physics, Central Michigan University, Mount Pleasant, MI 48859 (United States)

2012-05-15

We investigate the use of the gravity sensitive neutral sodium (Na I) doublet at 8183 Angstrom-Sign and 8195 Angstrom-Sign (Na 8200 Angstrom-Sign doublet) as an age indicator for M dwarfs. We measured the Na doublet equivalent width (EW) in giants, old dwarfs, young dwarfs, and candidate members of the {beta} Pic moving group using medium-resolution spectra. Our Na 8200 A doublet EW analysis shows that the feature is useful as an approximate age indicator in M-type dwarfs with (V - K{sub s}) {>=} 5.0, reliably distinguishing stars older and younger than 100 Myr. A simple derivation of the dependence of the Na EW on temperature and gravity supports the observational results. An analysis of the effects of metallicity shows that this youth indicator is best used on samples with similar metallicity. The age estimation technique presented here becomes useful in a mass regime where traditional youth indicators are increasingly less reliable, is applicable to other alkali lines, and will help identify new low-mass members in other young clusters and associations.

Localized excitations in superconducting point contacts: probing the Andreev doublet

International Nuclear Information System (INIS)

Bretheau, L.

2013-01-01

The Josephson effect describes the coherent coupling between superconductors and the resulting supercurrent. Microscopically, it arises from the existence of discrete quasiparticle states, localized at the weak link, the Andreev bound states. They come in doublets in each conduction channel of the weak link, with energies symmetric about the Fermi energy and opposite supercurrents. Each Andreev doublet gives rise to four states: the ground state |-> and the excited state |+>, with even parity, and the excited odd states |↑> and |↓>. Is it possible to address and control Andreev doublets? This thesis describes two sets of experiments designed to answer this question using the most basic Josephson element, a one-atom contact between two superconducting electrodes. In a first experiment, we have observed and characterized the excited odd states |↑> and |↓>. As expected for a spin-degenerate system, they do not carry supercurrent. In this experiment the excitation was uncontrolled and resulted from trapping of spurious quasiparticles. We have measured the lifetime of the odd states: under some condition, it is found to exceed 100 μs. The second experiment is a photon-absorption spectroscopy of the Andreev doublet. It was performed by using a Josephson junction as an integrated on-chip microwave emitter and detector. The observed Andreev transitions correspond to excitation from the ground state |->to the excited even state |+>, and are well accounted for by our quantum model. This result opens the way to coherent manipulation of this two level system. The direct observation of the excited Andreev state, either by quasiparticle-injection or photon-absorption, strongly supports the mesoscopic theory of the Josephson effect. It shows that in addition to the phase difference, each channel of a Josephson weak link possesses an internal fermionic degree of freedom. It could be used to code information in a novel type of superconducting qubit. (author) [fr

Electric dipole moments in two-Higgs-doublet models

Energy Technology Data Exchange (ETDEWEB)

Jung, Martin [Institut für Physik, Technische Universität Dortmund,Otto-Hahn-Str. 4, D-44221 Dortmund (Germany); Pich, Antonio [IFIC, Universitat de València - CSIC,Apt. Correos 22085, E-46071 València (Spain)

2014-04-10

Electric dipole moments are extremely sensitive probes for additional sources of CP violation in new physics models. Specifically, they have been argued in the past to exclude new CP-violating phases in two-Higgs-doublet models. Since recently models including such phases have been discussed widely, we revisit the available constraints in the presence of mechanisms which are typically invoked to evade flavour-changing neutral currents. To that aim, we start by assessing the necessary calculations on the hadronic, nuclear and atomic/molecular level, deriving expressions with conservative error estimates. Their phenomenological analysis in the context of two-Higgs-doublet models yields strong constraints, in some cases weakened by a cancellation mechanism among contributions from neutral scalars. While the corresponding parameter combinations do not yet have to be unnaturally small, the constraints are likely to preclude large effects in other CP-violating observables. Nevertheless, the generically expected contributions to electric dipole moments in this class of models lie within the projected sensitivity of the next-generation experiments.

Power systems for the Doublet III 2-MW ECH system

International Nuclear Information System (INIS)

Remsen, D.B. Jr.

1981-10-01

A system providing 5 second pulses at 60 GHz from ten 200 kW gyrotrons is being prepared for electron cyclotron heating experiments on Doublet III. The power supply for the gyrotron system is a power supply currently under construction by Universal Voltronics Corporation for the Doublet III neutral beam power supply, and is to have the option of reverse polarity (negative) to fill the needs of the system of ten gyrotons operating in parallel. The output of this power supply is 80 kV at 100A for 5 second pulses with good regulation. The output pulse rise and fall times and fault protection response time are all compatible with the gyrotron requirements

Radiative electroweak breaking with pseudo Goldstone Higgs doublets

International Nuclear Information System (INIS)

Ananthanarayan, B.; Shafi, Q.

1996-01-01

We consider a realistic example of supersymmetric grand unification based on SU(3) c xSU(3) L xSU(3) R in which the electroweak (EW) Higgs doublets are open-quote open-quote light close-quote close-quote as a consequence of the open-quote open-quote pseudo Goldstone close-quote close-quote mechanism. We discuss radiative EW breaking in this model, exploring in particular the open-quote open-quote small close-quote close-quote (order unity) and open-quote open-quote large close-quote close-quote (≅m t /m b ) tanβ regions by studying the variations of r 2 (≡μ 1,2 2 /μ 2 3 ), where μ 1,2,3 2 are the well-known MSSM parameters evaluated at the GUT scale. For |r| sufficiently close to unity the quantity tanβ can be of order unity, but the converse is not always true. copyright 1996 The American Physical Society

Doublet III construction and engineering test

International Nuclear Information System (INIS)

Anon.

1979-01-01

Progress during FY-78 on the construction and operation of the Doublet III is reported. Detailed discussions about the installation and testing of various components and subsystems, including the B-coil, E-coil, F-coils and support structure, vacuum vessel, vacuum pumping system, limiter, thermal insulation blanket, control system, B-coil power system, E-coil power system, F-coil power system, and motor-generator, are presented. A brief review of the engineering test operation is given

Selection of doublet cellular patterns in directional solidification through spatially periodic perturbations

International Nuclear Information System (INIS)

Losert, W.; Stillman, D.A.; Cummins, H.Z.; Kopczynski, P.; Rappel, W.; Karma, A.

1998-01-01

Pattern formation at the solid-liquid interface of a growing crystal was studied in directional solidification using a perturbation technique. We analyzed both experimentally and numerically the stability range and dynamical selection of cellular arrays of 'doublets' with asymmetric tip shapes, separated by alternate deep and shallow grooves. Applying an initial periodic perturbation of arbitrary wavelength to the unstable planar interface allowed us to force the interface to evolve into doublet states that would not otherwise be dynamically accessible from a planar interface. We determined systematically the ranges of wavelength corresponding to stable singlets, stable doublets, and transient unstable patterns. Experimentally, this was accomplished by applying a brief UV light pulse of a desired spatial periodicity to the planar interface during the planar-cellular transient using the model alloy Succinonitrile-Coumarin 152. Numerical simulations of the nonlinear evolution of the interface were performed starting from a small sinusoidal perturbation of the steady-state planar interface. These simulations were carried out using a computationally efficient phase-field symmetric model of directional solidification with recently reformulated asymptotics and vanishing kinetics [A. Karma and W.-J. Rappel, Phys. Rev. E 53 R3017 (1996); Phys. Rev. Lett. 77, 4050 (1996); Phys. Rev. E 57, 4323 (1998)], which allowed us to simulate spatially extended arrays that can be meaningfully compared to experiments. Simulations and experiments show remarkable qualitative agreement in the dynamic evolution, steady-state structure, and instability mechanisms of doublet cellular arrays. copyright 1998 The American Physical Society

Graphite limiter and armour damage in Doublet III

International Nuclear Information System (INIS)

McKelvey, T.; Taylor, T.; Trester, P.

1983-01-01

Graphite coated with TiC has been used extensively in Doublet III for limiters and neutral beam armour. Performance of these components has been superior to that of the metal components previously used. Damage to the coated graphite has occurred and can be classified into three categories: (1) gross failure of the graphite due to thermal stresses induced by the combination of high applied energy fluxes and mechanical restraint, (2) surface failure of the graphite due to runaway electron impingement, and (3) loss of TiC coating due to arcing, sputtering, vaporization and spalling, primarily during plasma disruptions and other abnormal plasma conditions. Design improvements are being continually implemented to minimize this damage and its consequences. (author)

Inert doublet dark matter with an additional scalar singlet and 125 GeV Higgs boson

Energy Technology Data Exchange (ETDEWEB)

Dutta Banik, Amit; Majumdar, Debasish [Saha Institute of Nuclear Physics, Astroparticle Physics and Cosmology Division, Kolkata (India)

2014-11-15

In this work we consider a model for particle dark matter where an extra inert Higgs doublet and an additional scalar singlet is added to the Standard Model (SM) Lagrangian. The dark matter candidate is obtained from only the inert doublet. The stability of this one component dark matter is ensured by imposing a Z{sub 2} symmetry on this additional inert doublet. The additional singlet scalar has a vacuum expectation value (VEV) and mixes with the Standard Model Higgs doublet, resulting in two CP even scalars h{sub 1} and h{sub 2}. We treat one of these scalars, h{sub 1}, to be consistent with the SM Higgs-like boson of mass around 125 GeV reported by the LHC experiment. These two CP even scalars contribute to the annihilation cross section of this inert doublet dark matter, resulting in a larger dark matter mass region that satisfies the observed relic density. We also investigate the h{sub 1} → γγ and h{sub 1} → γ Z processes and compared these with LHC results. This is also used to constrain the dark matter parameter space in the present model. We find that the dark matter candidate in the mass region 60-80 GeV (m{sub 1} = 125 GeV, mass of h{sub 1}) satisfies the recent bound from LUX direct detection experiment. (orig.)

Leptophobic Z' in models with multiple Higgs doublet fields

Science.gov (United States)

Chiang, Cheng-Wei; Nomura, Takaaki; Yagyu, Kei

2015-05-01

We study the collider phenomenology of the leptophobic Z' boson from an extra U(1)' gauge symmetry in models with N -Higgs doublet fields. We assume that the Z' boson at tree level has (i) no Z- Z' mixing, (ii) no interaction with the charged leptons, and (iii) no flavour-changing neutral current. Under such a setup, it is shown that in the N = 1 case, all the U(1)' charges of left-handed quark doublets and right-handed up- and down- type quarks are required to be the same, while in the N ≥ 3 case one can take different charges for the three types of quarks. The N = 2 case is not well-defined under the above three requirements. We study the processes ( V = γ , Z and W ±) with the leptonic decays of Z and W ± at the LHC. The most promising discovery channel or the most stringent constraint on the U(1)' gauge coupling constant comes from the Z'γ process below the threshold and from the process above the threshold. Assuming the collision energy of 8 TeV and integrated luminosity of 19.6 fb-1, we find that the constraint from the Z'γ search in the lower mass regime can be stronger than that from the UA2 experiment. In the N ≥ 3 case, we consider four benchmark points for the Z' couplings with quarks. If such a Z' is discovered, a careful comparison between the Z'γ and Z' W signals is crucial to reveal the nature of Z' couplings with quarks. We also present the discovery reach of the Z' boson at the 14-TeV LHC in both N = 1 and N ≥ 3 cases.

The influence of reservoir heterogeneities on geothermal doublet performance

NARCIS (Netherlands)

Doddema, Leon

2012-01-01

SUMMARY The current main problem with deep geothermal energy in the Netherlands is the uncertainty in terms of attainable flow rate and life time. The goal of this research is therefore modeling a geothermal doublet in a heterogeneous reservoir, using a

Design study of a new vacuum vessel for Doublet III

International Nuclear Information System (INIS)

Rawls, J.M.; Davis, L.G.; Anderson, P.M.

1980-10-01

The principal thrust of the project was to examine a single design in enough depth to gain confidence in the feasibility and desirability of specific design features. However, a valuable spin-off of the project was to develop information of a more generic character to aid in future studies of possibilities for Doublet III. For example, we now feel that Doublet III can be reconfigured with any of a variety of new vacuum vessels, poloidal coil sets, and auxiliary heating systems within three years of project initiation, a period that is short compared to the time scale for developing a completely new facility. In addition, this can be accomplished at a fraction of the cost required to develop a comparable facility

Higgs bosons in the two-doublet model with CP violation

International Nuclear Information System (INIS)

Akhmetzyanova, E.; Dolgopolov, M.; Dubinin, M.

2005-01-01

We consider the effective two-Higgs-doublet potential with complex parameters, when the CP invariance is broken both explicitly and spontaneously. The diagonal mass term in the local minimum of the potential is constructed for the physical basis of Higgs fields, keeping explicitly the limiting case of CP conservation, if the parameters are taken real. For the special case of the two-doublet Higgs sector of the minimal supersymmetric model, when CP invariance is violated by the Higgs bosons interaction with scalar quarks of the third generation, we calculate by means of the effective potential method the Higgs boson masses and evaluate the two-fermion Higgs boson decay widths and the widths of rare one-loop-mediated decays H→γγ, H→gg

Vortex solutions in two-Higgs-doublet systems

International Nuclear Information System (INIS)

Bimonte, G.; Lozano, G.

1994-04-01

We analyze the existence of string-like defects in a two-Higgs-doublet system having SU(2) x U(1) y x U(1) y , as gauge group. We are able to show that, when certain relations among the parameters hold, these configurations satisfy a set of first order differential equations (Bogomol'nyi equations) and their energy is proportional to their topological charge. (author). 12 refs

Search for a lighter Higgs boson in Two Higgs Doublet Models

Energy Technology Data Exchange (ETDEWEB)

Cacciapaglia, Giacomo; Deandrea, Aldo; Gascon-Shotkin, Suzanne; Corre, Solène Le; Lethuillier, Morgan [University Lyon, Université Claude Bernard Lyon 1, CNRS/IN2P3, UMR5822 IPNL,4, rue E. Fermi, Villeurbanne, F-69622 (France); Tao, Junquan [Institute High Energy Physics, Chinese Academy of Sciences,P.O. Box 918, Beijing, 100049 (China)

2016-12-15

We consider present constraints on Two Higgs Doublet Models, both from the LHC at Run 1 and from other sources in order to explore the possibility of constraining a neutral scalar or pseudo-scalar particle lighter than the 125 GeV Higgs boson. Such a lighter particle is not yet completely excluded by present data. We show with a simplified analysis that some new constraints could be obtained at the LHC if such a search is performed by the experimental collaborations, which we therefore encourage to continue carrying out light diphoton resonance searches at √s=13 TeV in the context of Two Higgs Doublet Models.

A two-Higgs-doublet model facing experimental hints

Directory of Open Access Journals (Sweden)

Crivellin Andreas

2016-01-01

Full Text Available Physics beyond the Standard Model has so far eluded our experimental probes. Nevertheless, a number of interesting anomalies have accumulated that can be taken as hints towards new physics: BaBar, Belle, and LHCb have found deviations of approximately 3:8σ in B → Dτν and B → D*τν; the anomalous magnetic moment of the muon differs by about 3σ from the theoretic prediction; the branching ratio for τ → μνν is about 2σ above the Standard Model expectation; and CMS and ATLAS found hints for a non-zero decay rate of h → μτ at 2.6σ. Here we consider these processes within a lepton-specific two-Higgs doublet model with additional non-standard Yukawa couplings and show how (and which of these excesses can be accommodated.

Trilinear Higgs couplings in the two Higgs doublet model with CP violation

International Nuclear Information System (INIS)

Osland, Per; Pandita, P. N.; Selbuz, Levent

2008-01-01

We carry out a detailed analysis of the general two Higgs doublet model with CP violation. We describe two different parametrizations of this model, and then study the Higgs boson masses and the trilinear Higgs couplings for these two parametrizations. Within a rather general model, we find that the trilinear Higgs couplings have a significant dependence on the details of the model, even when the lightest Higgs boson mass is taken to be a fixed parameter. We include radiative corrections in the one-loop effective potential approximation in our analysis of the Higgs boson masses and the Higgs trilinear couplings. The one-loop corrections to the trilinear couplings of the two Higgs doublet model also depend significantly on the details of the model, and can be rather large. We study quantitatively the trilinear Higgs couplings, and show that these couplings are typically several times larger than the corresponding standard model trilinear Higgs coupling in some regions of the parameter space. We also briefly discuss the decoupling limit of the two Higgs doublet model.

Electroweak phase transition in two Higgs doublet models

International Nuclear Information System (INIS)

Cline, J.M.; Lemieux, P.

1997-01-01

We reexamine the strength of the first-order phase transition in the electroweak theory supplemented by an extra Higgs doublet. The finite-temperature effective potential V eff is computed to one-loop order, including the summation of ring diagrams, to study the ratio φ c /T c of the Higgs field VEV to the critical temperature. We make a number of improvements over previous treatments, including a consistent treatment of Goldstone bosons in V eff , an accurate analytic approximation to V eff valid for any mass-to-temperature ratios, and use of the experimentally measured top quark mass. For two-Higgs-doublet models, we identify a significant region of parameter space where φ c /T c is large enough for electroweak baryogenesis, and we argue that this identification should persist even at higher orders in perturbation theory. In the case of the minimal supersymmetric standard model, our results indicate that the extra Higgs bosons have little effect on the strength of the phase transition. copyright 1997 The American Physical Society

Collisional broadening of alkali doublets by helium perturbers

Energy Technology Data Exchange (ETDEWEB)

Mullamphy, D F T [School of Mathematics, Physics and Information Technology, James Cook University, Townsville 4811 (Australia); Peach, G [Department of Physics and Astronomy, University College London WC1E 6BT (United Kingdom); Venturi, V [School of Mathematics, Physics and Information Technology, James Cook University, Townsville 4811 (Australia); Whittingham, I B [School of Mathematics, Physics and Information Technology, James Cook University, Townsville 4811 (Australia); Gibson, S J [School of Mathematics, Physics and Information Technology, James Cook University, Townsville 4811 (Australia)

2007-03-28

We report results for the Lorentzian profiles of the Li I, Na I and K I doublets and the Na I subordinate doublet broadened by helium perturbers for temperatures up to 3000 K. They have been obtained from a fully quantum-mechanical close-coupling description of the colliding atoms, the Baranger theory of line shapes and new ab initio potentials for the alkali-helium interaction. For all lines except the 769.9 nm K I line, the temperature dependence of the widths over the range 70 {<=} T {<=} 3000 K is accurately represented by the power law form w = aT{sup bb} with 0.38 < b < 0.43. The 769.9 nm K I line has this form for 500 {<=} T {<=} 3000 K with b having the higher value of 0.49. Although the shifts have a more complex temperature dependence, they all have the general feature of increasing with temperature above T {approx} 500 K apart from the 769.9 K I line whose shift decreases with temperature.

The flavor-locked flavorful two Higgs doublet model

Science.gov (United States)

Altmannshofer, Wolfgang; Gori, Stefania; Robinson, Dean J.; Tuckler, Douglas

2018-03-01

We propose a new framework to generate the Standard Model (SM) quark flavor hierarchies in the context of two Higgs doublet models (2HDM). The `flavorful' 2HDM couples the SM-like Higgs doublet exclusively to the third quark generation, while the first two generations couple exclusively to an additional source of electroweak symmetry breaking, potentially generating striking collider signatures. We synthesize the flavorful 2HDM with the `flavor-locking' mechanism, that dynamically generates large quark mass hierarchies through a flavor-blind portal to distinct flavon and hierarchon sectors: dynamical alignment of the flavons allows a unique hierarchon to control the respective quark masses. We further develop the theoretical construction of this mechanism, and show that in the context of a flavorful 2HDM-type setup, it can automatically achieve realistic flavor structures: the CKM matrix is automatically hierarchical with | V cb | and | V ub | generically of the observed size. Exotic contributions to meson oscillation observables may also be generated, that may accommodate current data mildly better than the SM itself.

Conceptual design summary for modifying Doublet III to a large dee-shaped configuration

International Nuclear Information System (INIS)

Davis, L.G.; Gallix, R.; Luxon, J.L.; Mahdavi, M.A.; Puhn, F.A.; Rock, P.J.; Wesley, J.C.

1983-05-01

The Doublet III tokamak is to be reconfigured by replacing its indented (doublet) vacuum vessel with a larger one of a dee-shaped cross section. This change will permit significantly larger elongated plasmas than is presently possible and will allow higher plasma current (up to 5 MA) and anticipated longer confinement time. Reactor relevant values of stable beta and plasma pressure are predicted. This modification, while resulting in a significant change in capability, utilizes most of the existing coils, structure, systems and facility

Two Higgs doublets in SO(10) model

International Nuclear Information System (INIS)

Asatryan, G.M.

1989-01-01

An SO(10) grand unification model is suggested with two light Higgs doublets, whose vacuum expectation values are connected with the SU(2) L xU(1) Y electroweak group breaking. Taking into account the naturality condition associated with absence of flavor changing neutral currents, a certain form of the quark mass matrices. As a result, the proton lifetime in the SO(10) model turns to be strongly restrained

On the connectivity anisotropy in fluvial Hot Sedimentary Aquifers and its influence on geothermal doublet performance

DEFF Research Database (Denmark)

Willems, Cees J.L.; Nick, Hamid; Donselaar, Marinus E.

2017-01-01

This study finds that the geothermal doublet layout with respect to the paleo flow direction in fluvial sedimentary reservoirs could significantly affect pump energy losses. These losses can be reduced by up to 10% if a doublet well pair is oriented parallel to the paleo flow trend compared...

Stability analysis for the Big Dee upgrade of the Doublet III tokamak

International Nuclear Information System (INIS)

Helton, F.J.; Luxon, J.L.

1987-01-01

Ideal magnetohydrodynamic stability analysis has been carried out for configurations expected in the Big Dee tokamak, an upgrade of the Doublet III tokamak into a non-circular cross-section device which began operation early in 1986. The results of this analysis support theoretical predictions as follows: Since the maximum value of beta stable to ballooning and Mercier modes, which we denote β c , increases with inverse aspect ratio, elongation and triangularity, the Big Dee is particularly suited to obtain high values of β c and there exist high β c Big Dee equilibria for large variations in all relevant plasma parameters. The beta limits for the Big Dee are consistent with established theory as summarized in present scaling laws. High beta Big Dee equilibria are continuously accessible when approached through changes in all relevant input parameters and are structurally stable with respect to variations of input plasma parameters. Big Dee beta limits have a smooth dependence on plasma parameters such as β p and elongation. These calculations indicate that in the actual running of the device the Big Dee high beta equilibria should be smoothly accessible. Theory predicts that the limiting plasma parameters, such as beta, total plasma current and plasma pressure, which can be obtained within the operating limits of the Big Dee are reactor relevant. Thus the Big Dee should be able to use its favourable ideal MHD scaling and controlled plasma shaping to attain reactor relevant parameters in a moderate sized device. (author)

Autler-Townes doublet and electromagnetically induced transparency resonance probed by an ultrashort pulse train

International Nuclear Information System (INIS)

Soares, A A; De Araujo, Luis E E

2010-01-01

We study theoretically the interaction between an ultrashort pulse train and a three-level atom driven by a cw laser. We show that the pulse train can be employed to observe spectra of Autler-Townes doublet and electromagnetically induced transparency resonance that are time and frequency resolved. The observation of subnatural linewidth features associated with the electromagnetically induced transparency resonance is described. The temporal evolution of electromagnetically induced transparency of the pulse train is shown to exhibit new and different features compared to that of the related phenomenon of coherent population trapping. By matching the tooth separation of the frequency comb associated with the pulse train to that of the Autler-Townes doublet, quantum beats between the doublet components can be induced. We show that coherent accumulation of excitation plays a major role in the two studied phenomena.

Generation of deviation parameters for amino acid singlets, doublets ...

Indian Academy of Sciences (India)

We present a new method, secondary structure prediction by deviation parameter (SSPDP) for predicting the secondary structure of proteins from amino acid sequence. Deviation parameters (DP) for amino acid singlets, doublets and triplets were computed with respect to secondary structural elements of proteins based on ...

Penguin effects induced by the two-Higgs-doublet model and charmless B-meson decays

International Nuclear Information System (INIS)

Davies, A.J.; Joshi, G.C.; Matsuda, M.

1991-03-01

Nonstandard physical effects through the penguin diagram induced by the charged Higgs scalar contribution in the two-Higgs-doublet model are analysed. The non-leptonic β-decay processes including the non-standard two-Higgs-doublet contribution are compared with the standard model results, which arise from the magnetic gluon transition term. The charged Higgs contribution gives a sizable enhancement to the branching fractions of β-meson charmless decay. 13 refs., 4 figs

Agnostic stacking of intergalactic doublet absorption: measuring the Ne VIII population

Science.gov (United States)

Frank, Stephan; Pieri, Matthew M.; Mathur, Smita; Danforth, Charles W.; Shull, J. Michael

2018-05-01

We present a blind search for doublet intergalactic metal absorption with a method dubbed `agnostic stacking'. Using a forward-modelling framework, we combine this with direct detections in the literature to measure the overall metal population. We apply this novel approach to the search for Ne VIII absorption in a set of 26 high-quality COS spectra. We probe to an unprecedented low limit of log N>12.3 at 0.47≤z ≤1.34 over a path-length Δz = 7.36. This method selects apparent absorption without requiring knowledge of its source. Stacking this mixed population dilutes doublet features in composite spectra in a deterministic manner, allowing us to measure the proportion corresponding to Ne VIII absorption. We stack potential Ne VIII absorption in two regimes: absorption too weak to be significant in direct line studies (12.3 13.7). We do not detect Ne VIII absorption in either regime. Combining our measurements with direct detections, we find that the Ne VIII population is reproduced with a power-law column density distribution function with slope β = -1.86 ^{+0.18 }_{ -0.26} and normalization log f_{13.7} = -13.99 ^{+0.20 }_{ -0.23}, leading to an incidence rate of strong Ne VIII absorbers dn/dz =1.38 ^{+0.97 }_{ -0.82}. We infer a cosmic mass density for Ne VIII gas with 12.3 value significantly lower that than predicted by recent simulations. We translate this density into an estimate of the baryon density Ωb ≈ 1.8 × 10-3, constituting 4 per cent of the total baryonic mass.

Mass terms of CP-violating Weinberg three-Higgs-doublet model at a charge-breaking vacuum

International Nuclear Information System (INIS)

Zarrinkamar, S.; Hassanabadi, H.; Rajabi, A.A.

2010-01-01

Weinberg three-Higgs-doublet model attracts interest in many aspects including the study of CP-violation as well as calculating the muon transverse polarization and neutron electric dipole moment. In the present work, we calculate the mass terms of CP-violating Weinberg 3HDM at a charge-breaking vacuum using an elaborate basis. (author)

Vapor deposition on doublet airfoil substrates: Control of coating thickness and microstructure

Energy Technology Data Exchange (ETDEWEB)

Rodgers, Theron M.; Zhao, Hengbei; Wadley, Haydn N. G., E-mail: haydn@virginia.edu [Department of Materials Science and Engineering, University of Virginia, 395 McCormick Rd., P.O. Box 400745, Charlottesville, Virginia 22904 (United States)

2015-11-15

Gas jet assisted vapor deposition processes for depositing coatings are conducted at higher pressures than conventional physical vapor deposition methods, and have shown promise for coating complex shaped substrates including those with non-line-of-sight (NLS) regions on their surface. These regions typically receive vapor atoms at a lower rate and with a wider incident angular distribution than substrate regions in line-of-sight (LS) of the vapor source. To investigate the coating of such substrates, the thickness and microstructure variation along the inner (curved) surfaces of a model doublet airfoil containing both LS and NLS regions has been investigated. Results from atomistic simulations and experiments confirm that the coating's thickness is thinner in flux-shadowed regions than in other regions for all the coating processes investigated. They also indicated that the coatings columnar microstructure and pore volume fraction vary with surface location through the LS to NLS transition zone. A substrate rotation strategy for optimizing the thickness over the entire doublet airfoil surface was investigated, and led to the identification of a process that resulted in only small variation of coating thickness, columnar growth angle, and pore volume fraction on all doublet airfoil surfaces.

High plasma exposure to pemetrexed leads to severe hyponatremia in patients with advanced non small cell lung cancer receiving pemetrexed-platinum doublet chemotherapy

International Nuclear Information System (INIS)

Gota, Vikram; Kavathiya, Krunal; Doshi, Kartik; Gurjar, Murari; Damodaran, Solai E; Noronha, Vanita; Joshi, Amit; Prabhash, Kumar

2014-01-01

Pemetrexed-platinum doublet therapy is a standard treatment for stage IIIb/IV nonsquamous non small cell lung cancer (NSCLC). While the regimen is associated with several grade ≥3 toxicities, hyponatremia is not a commonly reported adverse effect. Here we report an unusually high incidence of grade ≥3 hyponatremia in Indian patients receiving pemetrexed-platinum doublet, and the pharmacological basis for this phenomenon. Forty-six patients with advanced NSCLC were enrolled for a bioequivalence study of two pemetrexed formulations. All patients received the pemetrexed-platinum doublet for six cycles followed by single-agent pemetrexed maintenance until progression. Pharmacokinetic blood samples were collected at predefined time points during the first cycle and the concentration-time profile of pemetrexed was investigated by noncompartmental analysis. Hyponatremic episodes were investigated with serum electrolytes, serum osmolality, urinary sodium, and urine osmolality. Sixteen of 46 patients (35%) had at least one episode of grade ≥3 hyponatremia. Twenty-four episodes of grade ≥3 hyponatremia were observed in 200 cycles of doublet chemotherapy. Plasma exposure to pemetrexed was significantly higher in patients with high-grade hyponatremia than in those with low-grade or no hyponatremia (P=0.063 and P=0.001, respectively). Pemetrexed clearance in high-grade hyponatremia was quite low compared with normal and low-grade hyponatremia (P=0.001 and P=0.055, respectively). Median pemetrexed exposure in this cohort was much higher than that reported in the literature from Western studies. Higher exposure to pemetrexed is associated with grade ≥3 hyponatremia. The pharmacogenetic basis for higher exposure to pemetrexed in Indian patients needs further investigation

Standard model fermion hierarchies with multiple Higgs doublets

International Nuclear Information System (INIS)

Solaguren-Beascoa Negre, Ana

2016-01-01

The hierarchies between the Standard Model (SM) fermion masses and mixing angles and the origin of neutrino masses are two of the biggest mysteries in particle physics. We extend the SM with new Higgs doublets to solve these issues. The lightest fermion masses and the mixing angles are generated through radiative effects, correctly reproducing the hierarchy pattern. Neutrino masses are generated in the see-saw mechanism.

Inert two-Higgs-doublet model strongly coupled to a non-Abelian vector resonance

Science.gov (United States)

Rojas-Abatte, Felipe; Mora, Maria Luisa; Urbina, Jose; Zerwekh, Alfonso R.

2017-11-01

We study the possibility of a dark matter candidate having its origin in an extended Higgs sector which, at least partially, is related to a new strongly interacting sector. More concretely, we consider an i2HDM (i.e., a Type-I two Higgs doublet model supplemented with a Z2 under which the nonstandard scalar doublet is odd) based on the gauge group S U (2 )1×S U (2 )2×U (1 )Y . We assume that one of the scalar doublets and the standard fermion transform nontrivially under S U (2 )1 while the second doublet transforms under S U (2 )2. Our main hypothesis is that standard sector is weakly coupled while the gauge interactions associated to the second group is characterized by a large coupling constant. We explore the consequences of this construction for the phenomenology of the dark matter candidate and we show that the presence of the new vector resonance reduces the relic density saturation region, compared to the usual i2DHM, in the high dark matter mass range. In the collider side, we argue that the mono-Z production is the channel which offers the best chances to manifest the presence of the new vector field. We study the departures from the usual i2HDM predictions and show that the discovery of the heavy vector at the LHC is challenging even in the mono-Z channel since the typical cross sections are of the order of 10-2 fb .

The parity doublet model with fluctuations

Energy Technology Data Exchange (ETDEWEB)

Weyrich, Johannes; Smekal, Lorenz von [TU Darmstadt (Germany); Strodthoff, Nils [Universitaet Heidelberg (Germany)

2014-07-01

In the 1970s the Walecka model and the chiral Walecka model were developed and have since been studied intensively. It was noted early on, however, that the chiral model leads to massless Lee-Wick nuclear matter in the chirally restored phase. A promising variant to describe nuclear matter and chiral symmetry restoration consistently is the parity doublet model (or mirror model). It has already been treated in a mean field (MF) approach with promising results. This is motivation for us to to examine this model with functional renormalization group (FRG) methods, hence including full mesonic fluctuations.

Design, construction and commissioning of a simple, low cost permanent magnet quadrupole doublet

International Nuclear Information System (INIS)

Conard, E.M.; Parcell, S.K.; Arnott, D.W.

1999-01-01

In the framework of new beam line developments at the Australian National Medical Cyclotron, a permanent magnet quadrupole doublet was designed and built entirely in house. The design proceeded from the classical work by Halbach et al. but emphasised the 'low cost' aspect by using simple rectangular NdFeB blocks and simple assembly techniques. Numerical simulations using the (2-D) Gemini code were performed to check the field strength and homogeneity predictions of analytical calculations. This paper gives the reasons for the selection of a permanent magnet, the design and construction details of the quadrupole doublet and its field measurement results. (authors)

Development of thermal fractures in two Dutch geothermal doublets

NARCIS (Netherlands)

Loeve, D.; Veldkamp, J.G.; Peters, E.; Wees, J.D.A.M. van

2015-01-01

In the production well of a low-enthalpy geothermal doublet hot water is pumped from reservoirs at about 50-1007deg;C. After passing through a heat exchanger, the cold water is re-injected at about 20-357deg;C in the injection well into the reservoir, which initially has the same temperature as the

Measurements of Narrow Mg II Associated Absorption Doublets with ...

Indian Academy of Sciences (India)

2016-01-27

Jan 27, 2016 ... The measurement of the variations of absorption lines over time is a good method to study the physical conditions of absorbers. In this paper, we measure the variations of the line strength of 36 narrow Mg II2796, 2803 associated absorption doublets, which are imprinted on 31 quasar spectra with two ...

Material failures observed in the Doublet III neutral beamlines

International Nuclear Information System (INIS)

Bailey, E.W.; Colleraine, A.; Doll, D.; Grunloh, H.; Kim, J.; Langhorn, A.; Thurgood, B.

1983-01-01

The Doublet III neutral beam injectors consist of three separable spools two meters in diameter by four meters long overall when assembled. Contained within these spools are the neutralizers, ion dumps, deflecting magnet, calorimeter dumps, cryogenic panels and beam scraping collimators. To date three beamlines are in operation on Doublet III, and the beams have accumulated operating time of approximately 32 months, with the oldest having been in operation for 18 months. During this time operation of DIII with the neutral beam sources has demonstrated the following: 7.8 MW injected neutrals from three beamlines (6 sources), high β (4.5%), and non-circular plasma shape. The sources have also exibited a very reliable injected shot history. Material failures encountered during the operation of DIII N.B. injectors and the solutions to these failures are described. Failures include cracking of the neutralizer exit collimator due to heating cycles, failure of cyropanel support rods due to cooling cycles, failure of the sliding drive of the moveable calorimeter due to friction

Sensitive criterion for chirality; Chiral doublet bands in 104Rh59

International Nuclear Information System (INIS)

Koike, T.; Starosta, K.; Vaman, C.; Ahn, T.; Fossan, D.B.; Clark, R.M.; Cromaz, M.; Lee, I.Y.; Macchiavelli, A.O.

2003-01-01

A particle plus triaxial rotor model was applied to odd-odd nuclei in the A ∼ 130 region in order to study the unique parity πh11/2xνh11/2 rotational bands. With maximum triaxiality assumed and the intermediate axis chosen as the quantization axis for the model calculations, the two lowest energy eigenstates of a given spin have chiral properties. The independence of the quantity S(I) on spin can be used as a new criterion for chirality. In addition, a diminishing staggering amplitude of S(I) with increasing spin implies triaxiality in neighboring odd-A nuclei. Chiral quartet bases were constructed specifically to examine electromagnetic properties for chiral structures. A set of selection rules unique to chirality was derived. Doublet bands built on the πg9/2xνh11/2 configuration have been discovered in odd-odd 104Rh using the 96Zr(11B, 3n) reaction. Based on the discussed criteria for chirality, it is concluded that the doublet bands observed in 104Rh exhibit characteristic chiral properties suggesting a new region of chirality around A ∼110. In addition, magnetic moment measurements have been performed to test the πh11/2xνh11/2 configuration in 128Cs and the πg9/2xνh11/2 configuration in 104Rh

Penguin effects induced by the two-Higgs-doublet model and charmless B-meson decays

International Nuclear Information System (INIS)

Davies, A.J.; Joshi, G.C.; Matsuda, M.

1991-01-01

Nonstandard physical effects through the penguin diagram induced by the charged Higgs scalar contribution in the two-Higgs-doublet model are analysed. Since non-leptonic B-decay processes to final states consisting of s+s+anti s are induced only through the penguin diagram they are important tests of such contributions. We compare these decays including the non-standard two-Higgs-doublet contribution with the standard model results, which arise from the magnetic gluon transistion term. The charged Higgs contribution can give a sizable enhancement to the branching fraction of B-meson charmless decay. (orig.)

The influence of facies heterogeneity on the doublet performance in low-enthalpy geothermal sedimentary reservoirs

DEFF Research Database (Denmark)

Crooijmans, R. A.; Willems, C. J L; Nick, Hamid

2016-01-01

A three-dimensional model is used to study the influence of facies heterogeneity on energy production under different operational conditions of low-enthalpy geothermal doublet systems. Process-based facies modelling is utilised for the Nieuwerkerk sedimentary formation in the West Netherlands Basin...... and the energy recovery rate for different discharge rates and the production temperature (Tmin) above which the doublet is working. With respect to the results, we propose a design model to estimate the life time and energy recovery rate of the geothermal doublet. The life time is estimated as a function of N....../G, Tmin and discharge rate, while the design model for the energy recovery rate is only a function of N/G and Tmin. Both life time and recovery show a positive relation with an increasing N/G. Further our results suggest that neglecting details of process-based facies modelling may lead to significant...

LHC phenomenology of composite 2-Higgs doublet models

Energy Technology Data Exchange (ETDEWEB)

De Curtis, Stefania [University of Florence, Department of Physics and Astronomy, Sesto Fiorentino (Italy); INFN, Sezione di Firenze (Italy); Moretti, Stefano; Yagyu, Kei; Yildirim, Emine [University of Southampton, School of Physics and Astronomy, Southampton (United Kingdom)

2017-08-15

We investigate the phenomenology of Composite 2-Higgs doublet models (C2HDMs) of various Yukawa types based on the global symmetry breaking SO(6) → SO(4) x SO(2). The kinetic part and the Yukawa Lagrangian are constructed in terms of the pseudo Nambu-Goldstone Boson (pNGB) matrix and a 6-plet of fermions under SO(6). The scalar potential is assumed to be the same as that of the Elementary 2-Higgs doublet model (E2HDM) with a softly broken discrete Z{sub 2} symmetry. We then discuss the phenomenological differences between the E2HDM and C2HDM by focusing on the deviations from standard model (SM) couplings of the discovered Higgs state (h) as well as on the production cross sections and branching ratios (BRs) at the large Hadron collider (LHC) of extra Higgs bosons. We find that, even if the same deviation in the hVV (V = W,Z) coupling is assumed in the two scenarios, there appear significant differences between the E2HDM and C2HDM from the structure of the Yukawa couplings, so that production and decay features of extra Higgs bosons can be used to distinguish between the two scenarios. (orig.)

High-scale validity of a two-Higgs-doublet scenario: metastability included

Energy Technology Data Exchange (ETDEWEB)

Chakrabarty, Nabarun; Mukhopadhyaya, Biswarup [Harish-Chandra Research Institute, Regional Centre for Accelerator-based Particle Physics, Allahabad (India)

2017-03-15

We identify regions in a Type-II two-Higgs-doublet model which correspond to a metastable electroweak vacuum with lifetime larger than the age of the universe. We analyse scenarios which retain perturbative unitarity up to grand unification and Planck scales. Each point in the parameter space is restricted using data from the Large Hadron Collider (LHC) as well as flavour and precision electroweak constraints. We find that substantial regions of the parameter space are thus identified as corresponding to metastability, which complement the allowed regions for absolute stability, for top quark mass at the high as well as low end of its currently allowed range. Thus, a two-Higgs-doublet scenario with the electroweak vacuum, either stable or metastable, can sail through all the way up to the Planck scale without facing any contradiction. (orig.)

Doublet vs. FODO structure: beam dynamics and layout

CERN Document Server

Eshraqi, M; CERN. Geneva. BE Department

2010-01-01

A FoDo (singlet) structure is designed for the CERN Superconducting Proton LINAC. This architecture is compared to the baseline (doublet) architecture of SPL on the basis of its beam dynamics performance and the required investment. The sensitivity of both layouts to quadrupole gradient errors and misalignment is checked and a correction scheme for beam steering is proposed. Finally a single quad beam dilution scheme is studied and designed for the pilot beam dump.

Magnitude of Higgs-boson-exchange CP violation in two-doublet models with large tanβ

International Nuclear Information System (INIS)

Barr, S.M.

1993-01-01

CP violation in neutral Higgs-boson exchange is studied in two-doublet models in an expansion in (1/tan 2 β). The typical magnitude of various CP-violating quantities is found for large tanβ. In particular the electric dipole moment (EDM) of the electron and the coefficient c S of the CP-violating electron-nucleon scalar-pseudoscalar operator are examined and it is found that in a simple class of two-doublet models c S /d e is typically O(tan 2 β). Therefore c S is more important than d e for the EDM's of diamagnetic atoms and molecules (Hg, Xe, TlF) typically if tanβ approx-gt 5, and for paramagnetic atoms (Cs, Tl) if tanβ approx-gt 15. The dependence on tanβ of the various contributions to the neutron EDM including the Weinberg three-gluon operator, and the dependence on tanβ of the top-quark EDM are also discussed. Supersymmetric and three-doublet models are also considered

Precision lifetime measurements of Ar II 4p doublet levels

International Nuclear Information System (INIS)

Marger, D.; Schmoranzer, H.

1990-01-01

The lifetimes of the Ar II 4p doublet fine-structure levels 4p 2 D 0 5/2 , 4p' 2 F 0 5/2 and 4p' 2 F 0 7/2 were measured by beam-dye laser spectroscopy. The experimental uncertainty was reduced to below 1%. (orig.)

Function and operation of the Doublet III E-coil vacuum breaker system

International Nuclear Information System (INIS)

Callis, R.W.; Jackson, G.; DeGrassie, J.; Peterson, P.; LeVine, F.

1979-11-01

The ohmic heating system for the Doublet III fusion research device at General Atomic is required to provide the voltage for the initial breakdown phase (there is no preionization) along with the energy to drive the plasma current to a value of 2.5 MA or greater. This requires a peak one turn voltage of 250 volts (16 kV across coil terminals) and a magnetic flux swing of 5 volt-seconds (peak coil current of 110 kA). This voltage and flux swing is accomplished by reverse biasing the ohmic heating coil (E-coil) where, upon reaching a value of 110 ka the coil current is interrupted and commutated into a RC network producing 16 kV across the coil. The interrruption of the E-coil current is accomplished by the use of an array of vacuum circuit breakers (VCB's) and a counter plus network. A description is given of the ohmic heating circuit and the performance of the vacuum circuit breaker array and its counter pulse system

Radiative neutrino mass and Majorana dark matter within an inert Higgs doublet model

Science.gov (United States)

Ahriche, Amine; Jueid, Adil; Nasri, Salah

2018-05-01

We consider an extension of the standard model (SM) with an inert Higgs doublet and three Majorana singlet fermions to address both origin and the smallness of neutrino masses and dark matter (DM) problems. In this setup, the lightest Majorana singlet fermion plays the role of DM candidate and the model parameter space can be accommodated to avoid different experimental constraints such as lepton flavor violating processes and electroweak precision tests. The neutrino mass is generated at one-loop level a la Scotogenic model and its smallness is ensured by the degeneracy between the C P -odd and C P -even scalar members of the inert doublet. Interesting signatures at both leptonic and hadronic colliders are discussed.

New viable region of an inert Higgs doublet dark matter model with scotogenic extension

Science.gov (United States)

Borah, Debasish; Gupta, Aritra

2017-12-01

We explore the intermediate dark matter mass regime of the inert Higgs doublet model, approximately between 400 and 550 GeV, which is allowed by latest constraints from direct and indirect detection experiments, but the thermal relic abundance remains suppressed. We extend the model by three copies of right-handed neutrinos, odd under the built-in Z2 symmetry of the model. This discrete Z2 symmetry of the model allows these right-handed neutrinos to couple to the usual lepton doublets through the inert Higgs doublet allowing the possibility of radiative neutrino mass in the scotogenic fashion. Apart from generating nonzero neutrino mass, such an extension can also revive the intermediate dark matter mass regime. The late decay of the lightest right-handed neutrino to dark matter makes it possible for the usual thermally underabundant dark matter in this intermediate mass regime to satisfy the correct relic abundance limit. The revival of this wide intermediate mass range can have relevance not only for direct and indirect search experiments but also for neutrino experiments as the long lifetime of the lightest right-handed neutrino also results in almost vanishing lightest neutrino mass.

Nonclassical Effects of a Four-Level Excited-Doublet Atom Model

International Nuclear Information System (INIS)

Zhang Jiansong; Xu Jingbo

2006-01-01

We adopt a dynamical algebraic method to study a four-level excited-doublet atom model and obtain the explicit expressions of the time-evolution operator and the density operator for the system. The nonclassical effects of the system, such as collapses and revivals of the atomic inversion and squeezing of the radiation field, are also discussed.

Doublet channel neutron-deuteron scattering in leading order effective field theory

OpenAIRE

B. BlankleiderFlinders U.; J. Gegelia(INFN)

2015-01-01

The doublet channel neutron-deuteron scattering amplitude is calculated in leading order effective field theory (EFT). It is shown that this amplitude does not depend on a constant contact interaction three-body force. Satisfactory agreement with available data is obtained when only two-body forces are included.

CP properties of symmetry-constrained two-Higgs-doublet models

CERN Document Server

Ferreira, P M; Nachtmann, O; Silva, Joao P

2010-01-01

The two-Higgs-doublet model can be constrained by imposing Higgs-family symmetries and/or generalized CP symmetries. It is known that there are only six independent classes of such symmetry-constrained models. We study the CP properties of all cases in the bilinear formalism. An exact symmetry implies CP conservation. We show that soft breaking of the symmetry can lead to spontaneous CP violation (CPV) in three of the classes.

Doublet III limiter performance and implications for mechanical design and material selection for future limiters

International Nuclear Information System (INIS)

Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

1979-10-01

The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described

Doublet III limiter performance and implications for mechanical design and material selection for future limiters

Energy Technology Data Exchange (ETDEWEB)

Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

1979-10-01

The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described. (MOW)

Restrictions on two Higgs doublet models and CP violation at the unification scale

International Nuclear Information System (INIS)

Athanasiu, G.G.

1987-04-01

Bounds on charged Higgs masses and couplings in models with two Higgs doublets are examined that came from CP violation in the neutral K system. Bounds on charged Higgs masses and couplings in two Higgs doublet models are also obtained from their effects on neutral-B-meson mixing. The bounds are found to be comparable to those obtained with additional assumptions from the neutral K system. The three generation phase invariant measure of CP violation is shown to satisfy a simple and solvable renormalization group equation. Its value is seen to fall by four to eight orders of magnitude between the weak and grand unification scales in the standard model, as well as in its two Higgs and supersymmetric extensions

Energy confinement in Doublet III with high-Z limiters

Energy Technology Data Exchange (ETDEWEB)

Marcus, F.B.; Adcock, S.J.; Baker, D.R.; Blau, F.P.; Brooks, N.H.; Chase, R.P.; DeBoo, J.C.; Ejima, S.; Fairbanks, E.S.; Fisher, R.K.

1980-02-01

This report describes the experimental measurements and data analysis techniques used to evaluate the energy confinement in noncircular plasmas produced in Doublet III. Major aspects of the confinement measurements and analysis techniques are summarized. Machine parameters, diagnostic systems and discharge parameters relavent to the confinement measurements are given. Magnetic analysis techniques used to determine the plasma shape are reviewed. Scaling of the on-axis values of electron temperature, confinement time and Z/sub eff/ with plasma density is presented. Comparison with scaling results from other circular tokamaks is discussed. Numerical and analytic techniques developed for calculating the plasma energy confinement time and self-consistent profiles of density, temperature, current, and flux in non-circular geometries are described. These techniques are applied to the data and used to determine the central and global electron energy confinement time for a typical doublet plasma. Additional aspects of the confinement such as the radial dependence of the electron thermal conductivity and the estimated ion temperature are explored with the aid of a non-circular transport simulation code. The results of the confinement measurements are summarized and discussed. A brief summary of the theoretically expected effects of noncircularity on plasma confinement is included for reference as Appendix I.

Extending two Higgs doublet models for two-loop neutrino mass generation and one-loop neutrinoless double beta decay

Directory of Open Access Journals (Sweden)

Zhen Liu

2017-02-01

Full Text Available We extend some two Higgs doublet models, where the Yukawa couplings for the charged fermion mass generation only involve one Higgs doublet, by two singlet scalars respectively carrying a singly electric charge and a doubly electric charge. The doublet and singlet scalars together can mediate a two-loop diagram to generate a tiny Majorana mass matrix of the standard model neutrinos. Remarkably, the structure of the neutrino mass matrix is fully determined by the symmetric Yukawa couplings of the doubly charged scalar to the right-handed leptons. Meanwhile, a one-loop induced neutrinoless double beta decay can arrive at a testable level even if the electron neutrino has an extremely small Majorana mass. We also study other experimental constraints and implications including some rare processes and Higgs phenomenology.

Extending two Higgs doublet models for two-loop neutrino mass generation and one-loop neutrinoless double beta decay

Energy Technology Data Exchange (ETDEWEB)

Liu, Zhen, E-mail: liu-zhen@sjtu.edu.cn; Gu, Pei-Hong, E-mail: peihong.gu@sjtu.edu.cn

2017-02-15

We extend some two Higgs doublet models, where the Yukawa couplings for the charged fermion mass generation only involve one Higgs doublet, by two singlet scalars respectively carrying a singly electric charge and a doubly electric charge. The doublet and singlet scalars together can mediate a two-loop diagram to generate a tiny Majorana mass matrix of the standard model neutrinos. Remarkably, the structure of the neutrino mass matrix is fully determined by the symmetric Yukawa couplings of the doubly charged scalar to the right-handed leptons. Meanwhile, a one-loop induced neutrinoless double beta decay can arrive at a testable level even if the electron neutrino has an extremely small Majorana mass. We also study other experimental constraints and implications including some rare processes and Higgs phenomenology.

Precise predictions within the two-Higgs-doublet model

International Nuclear Information System (INIS)

Altenkamp, Lukas

2017-01-01

We consider the Two-Higgs-Doublet Model (THDM) where the Standard Model (SM) field content is extended by adding a further Higgs-boson doublet. This results in five Higgs bosons, two CP-even, one CP-odd and a charged Higgs boson and it's anti-particle. In order to provide accurate and reliable predictions within this model, next-to-leading order calculations are necessary. To this end, we perform a renormalization procedure and adopt four new renormalization schemes. The counterterm Feynman rules as well as the renormalization conditions are implemented into an FeynArts model file, yielding the possibility to generate amplitudes and squared matrix elements for arbitrary processes which is a major contribution to the automation of higher-order calculations. As an application we investigate the decay of a light, CP-even, SM-like Higgs boson into four fermions in the THDM. To this end, we extend the program Prophecy4f and compute the partial decay widths for different benchmark scenarios. For all investigated scenarios, we observe that the THDM widths are bounded by the SM widths and that the deviations are larger at higher order. The renormalization group equations have been solved in order to investigate the renormalization scale dependence which gives an estimate of the theoretical uncertainty arising due to the truncation of the perturbation series. By comparing the results of different renormalization schemes we determine for which parameter regions each scheme provides reliable predictions.

Precise predictions within the two-Higgs-doublet model

Energy Technology Data Exchange (ETDEWEB)

Altenkamp, Lukas

2017-02-21

We consider the Two-Higgs-Doublet Model (THDM) where the Standard Model (SM) field content is extended by adding a further Higgs-boson doublet. This results in five Higgs bosons, two CP-even, one CP-odd and a charged Higgs boson and it's anti-particle. In order to provide accurate and reliable predictions within this model, next-to-leading order calculations are necessary. To this end, we perform a renormalization procedure and adopt four new renormalization schemes. The counterterm Feynman rules as well as the renormalization conditions are implemented into an FeynArts model file, yielding the possibility to generate amplitudes and squared matrix elements for arbitrary processes which is a major contribution to the automation of higher-order calculations. As an application we investigate the decay of a light, CP-even, SM-like Higgs boson into four fermions in the THDM. To this end, we extend the program Prophecy4f and compute the partial decay widths for different benchmark scenarios. For all investigated scenarios, we observe that the THDM widths are bounded by the SM widths and that the deviations are larger at higher order. The renormalization group equations have been solved in order to investigate the renormalization scale dependence which gives an estimate of the theoretical uncertainty arising due to the truncation of the perturbation series. By comparing the results of different renormalization schemes we determine for which parameter regions each scheme provides reliable predictions.

Investigations on a Q0 Doublet Optics for the LHC Luminosity Upgrade

CERN Document Server

Laface, E; Scandale, Walter; Wildner, E

2008-01-01

The Q0 scheme of the LHC insertion region is based on the introduction of a doublet of quadrupoles at 13 m from the IP. We present here the doublet optics and the magnets layout such as gradients, lengths, positions and apertures. In this scheme we show the gain in luminosity and chromaticity, with respect to a nominal layout with $\\beta^{*}$ = 0.25 m (i.e. LHC phase 1 upgrade) and $\\beta^{*} = 0.15 m, due to a smaller beta-max. We show the alignment tolerance and the energy deposition issues, in Q0A-Q0B. We also consider shielding the magnets with liners. The capability of Q0 optics to limit the b function could be exploited after the LHC Phase 1 upgrade in order to reduce the $\\beta^{*}$ below 0.25 m, leaving the upgraded triplet unchanged

A rotated transmission grating spectrometer for detecting spectral separation of doublet Na

Energy Technology Data Exchange (ETDEWEB)

Santosa, Ignatius Edi [Department of Physics Education, Sanata Dharma University, Paingan Maguwohardjo Depok Sleman, Yogyakarta 55281, Indonesia edi@usd.ac.id (Indonesia)

2015-04-16

Transmission gratings are usually used in a spectrometer for measuring the wavelength of light. In the common design, the position of the grating is perpendicular to the incident light. In order to increase the angular dispersion, in contrary to the common design, in this experiment the transmission grating was rotated. Due to the non-zero incident angle, the diffracted light was shifted. This rotated transmission grating spectrometer has been used to determine the separation of doublet Na. In this experiment, the diffraction angle was measured at various incident angles. The spectral separation of doublet Na was identified from the difference in the diffraction angle of two spectral lines. This spectral separation depends on the incident angle, the grating constant and the order of diffraction. As the effect of increasing the incident angle, a significant increase of the spectral separation can be achieved up to three fold.

A rotated transmission grating spectrometer for detecting spectral separation of doublet Na

International Nuclear Information System (INIS)

Santosa, Ignatius Edi

2015-01-01

Transmission gratings are usually used in a spectrometer for measuring the wavelength of light. In the common design, the position of the grating is perpendicular to the incident light. In order to increase the angular dispersion, in contrary to the common design, in this experiment the transmission grating was rotated. Due to the non-zero incident angle, the diffracted light was shifted. This rotated transmission grating spectrometer has been used to determine the separation of doublet Na. In this experiment, the diffraction angle was measured at various incident angles. The spectral separation of doublet Na was identified from the difference in the diffraction angle of two spectral lines. This spectral separation depends on the incident angle, the grating constant and the order of diffraction. As the effect of increasing the incident angle, a significant increase of the spectral separation can be achieved up to three fold

Structure of potentials with N Higgs doublets

International Nuclear Information System (INIS)

Nishi, C. C.

2007-01-01

Extensions of the standard model with N Higgs doublets are simple extensions presenting a rich mathematical structure. An underlying Minkowski structure emerges from the study of both variable space and parameter space. The former can be completely parametrized in terms of two future lightlike Minkowski vectors with spatial parts forming an angle whose cosine is -(N-1) -1 . For the parameter space, the Minkowski parametrization enables one to impose sufficient conditions for bounded below potentials, characterize certain classes of local minima, and distinguish charge breaking vacua from neutral vacua. A particular class of neutral minima presents a degenerate mass spectrum for the physical charged Higgs bosons

Maximum entropy technique in the doublet structure analysis

International Nuclear Information System (INIS)

Belashev, B.Z.; Panebrattsev, Yu.A.; Shakhaliev, Eh.I.; Soroko, L.M.

1998-01-01

The Maximum Entropy Technique (MENT) for solution of the inverse problems is explained. The effective computer program for resolution of the nonlinear equations system encountered in the MENT has been developed and tested. The possibilities of the MENT have been demonstrated on the example of the MENT in the doublet structure analysis of noisy experimental data. The comparison of the MENT results with results of the Fourier algorithm technique without regularization is presented. The tolerant noise level is equal to 30% for MENT and only 0.1% for the Fourier algorithm

Elve Doublets: The Ionospheric Fingerprints of Compact Intracloud Discharges

Science.gov (United States)

da Silva, C. L.; Marshall, R. A.; Pasko, V. P.

2015-12-01

Compact intracloud discharges (CIDs) persist to date as one of the most mysterious lightning manifestations. CIDs are known to be the strongest natural sources of radio-frequency radiation on Earth. At VHF frequencies, approximately above 30 MHz, their emitted power is ten times stronger than that of other lightning processes. The well-known strength of CIDs in VHF contrasts with the lack of substantial optical measurements. CID's VLF/LF electric field change waveforms resemble one full cycle of a distorted sine function, with the first half-cycle being (a few times) larger-amplitude and shorter-duration than the second. For this reason CIDs have been dubbed narrow bipolar events (NBEs). NBE waveshapes are strikingly similar to the largest initial breakdown pulses (IBPs) that occur during the earlier stages of a conventional lightning flash, called classic IBPs. The similarity between classic IBP and NBE far-field waveforms, combined with the fact that positive-polarity NBEs frequently appear as the first event in an otherwise regular positive intracloud discharge, may be indicative that the source of these two E-field pulse types share the same physical mechanism inside thunderclouds [da Silva and Pasko, JGR, 120, 4989-5009, 2015]. In this presentation, we introduce a novel way to investigate CIDs. We show evidence that CIDs can produce an unique ionospheric signature, named "elve doublets". These signatures are characterized by a pair of elves separated in time by 80-160 microseconds. Our analysis combines fast photometric elve data, equivalent-transmission-line models to describe the dynamics of CID source currents, and FDTD modeling of electromagnetic wave propagation in the Earth-ionosphere waveguide accounting for its nonlinear interaction with the lower ionosphere [Marshall et al., GRL, 42, 2015, doi:10.1002/2015GL064862]. We show that typical (negative-polarity) CID altitudes, between 14-22 km, explain the time delay observed in elve doublets, where the

Theory of radiative muon capture with applications to nuclear spin and isospin doublets

International Nuclear Information System (INIS)

Hwang, W.P.; Primakoff, H.

1978-01-01

A theory of radiative muon capture, with applications to nuclear spin and isospin doublets, is formulated on the basis of the conservation of the hadronic electromagnetic current, the conservation of the hadronic weak polar currents, the partial conservation of the hadronic weak axial-vector current, the SU(2) x SU(2) current algebra for the various hadronic current, and a simplifying dynamical approximation for the hadron-radiating part of the transition amplitude: the ''linearity hypothesis''. The resultant total transition amplitude, which also includes the muon-radiating part, is worked out explicitly and applied to treat the processes μ - p → ν/sub μ/nγ and μ - 3 He → ν/sub μ/ 3 Hγ

Fluctuations observed in NBI heated Doublet III divertor discharges

International Nuclear Information System (INIS)

Konoshima, Shigeru; Aikawa, Hiroshi; Azumi, Masafumi

1983-10-01

A specific type of activity associated with fairly large pulsive energy loss has been observed, predominantly during improved confinement (H-mode) discharges in the NBI heated Doublet III tokamak. Large repetitive bursts of edge recycling light with 2-5ms duration and --10ms intervals appear in the course of increasing βsub(p). The amount of energy released by a single burst is estimated to be at least 2-3% of stored energy. As a result of these periodic energy losses, attained values of plasma energy is evaluated to be depressed as much as 10%. Prior to a burst, large m=n=0 magnetic field oscillations of --20kHz were observed with highly peaked distribution near the divertor region. No other particular activities which might be responsible for either the confinement deterioration or improvement have been found throughout the entire operational space. (author)

The inert doublet model in the light of Fermi-LAT gamma-ray data: a global fit analysis

Science.gov (United States)

Eiteneuer, Benedikt; Goudelis, Andreas; Heisig, Jan

2017-09-01

We perform a global fit within the inert doublet model taking into account experimental observables from colliders, direct and indirect dark matter searches and theoretical constraints. In particular, we consider recent results from searches for dark matter annihilation-induced gamma-rays in dwarf spheroidal galaxies and relax the assumption that the inert doublet model should account for the entire dark matter in the Universe. We, moreover, study in how far the model is compatible with a possible dark matter explanation of the so-called Galactic center excess. We find two distinct parameter space regions that are consistent with existing constraints and can simultaneously explain the excess: One with dark matter masses near the Higgs resonance and one around 72 GeV where dark matter annihilates predominantly into pairs of virtual electroweak gauge bosons via the four-vertex arising from the inert doublet's kinetic term. We briefly discuss future prospects to probe these scenarios.

The inert doublet model in the light of Fermi-LAT gamma-ray data: a global fit analysis

Energy Technology Data Exchange (ETDEWEB)

Eiteneuer, Benedikt; Heisig, Jan [RWTH Aachen University, Institute for Theoretical Particle Physics and Cosmology, Aachen (Germany); Goudelis, Andreas [UMR 7589 CNRS and UPMC, Laboratoire de Physique Theorique et Hautes Energies (LPTHE), Paris (France)

2017-09-15

We perform a global fit within the inert doublet model taking into account experimental observables from colliders, direct and indirect dark matter searches and theoretical constraints. In particular, we consider recent results from searches for dark matter annihilation-induced gamma-rays in dwarf spheroidal galaxies and relax the assumption that the inert doublet model should account for the entire dark matter in the Universe. We, moreover, study in how far the model is compatible with a possible dark matter explanation of the so-called Galactic center excess. We find two distinct parameter space regions that are consistent with existing constraints and can simultaneously explain the excess: One with dark matter masses near the Higgs resonance and one around 72 GeV where dark matter annihilates predominantly into pairs of virtual electroweak gauge bosons via the four-vertex arising from the inert doublet's kinetic term. We briefly discuss future prospects to probe these scenarios. (orig.)

Performance of Doublet III neutral beam injector cryopumping system

International Nuclear Information System (INIS)

Langhorn, A.R.; Kim, J.; Tupper, M.L.; Williams, J.P.; Fasolo, J.

1984-01-01

The Doublet III neutral beam injector system is based on three beamlines; each beamline employs two 80 kV/80 A hydrogen ion sources. Two liquid helium (LHe) cooled cryopanel arrays were designed as an integral part of the beamline in order to provide high differential pumping of hydrogen gas along the beamline. The cryopanel arrays consist of a front (nearer to the torus) disk panel (3 m 2 each side) with liquid nitrogen (LN 2 ) cooled chevrons and a rear cylindrical panel of modified Santeler panels (8 m 2 ) which also employs LN 2 cooled surfaces shielding LHe cooled surfaces. These cryopanels are piped in series. The LHe delivery is based on a closed-loop, forced-flow scheme intended for variable panel temperatures (3.7 to 4.3 K). It uses small tubes for mechanical flexibility and thermal resiliency providing ease of economic defrosting. The cryogenic system consists of a liquefier (100 l/h), a large Dewar, a heat exchanger, and a liquid ring pump. Three beamlines are serviced simultaneously by the system. Pumping speeds measured locally at ionization gauges, were well in excess of the 1.4 x 10 6 l/s design goal

FN-2HDM: Two Higgs Doublet Models with Froggatt-Nielsen symmetry

Energy Technology Data Exchange (ETDEWEB)

Dery, Avital; Nir, Yosef [Department of Particle Physics and Astrophysics, Weizmann Institute of Science, Herzl 234, Rehovot 76100 (Israel)

2017-04-03

We embed Two Higgs Doublet Models (2HDMs) in the Froggatt Nielsen (FN) framework. We find that the approximate FN symmetry predicts i) approximate Natural Flavor Conservation (NFC) of Types II or IV in the Yukawa sector, and ii) approximate Peccei-Quinn (PQ) symmetry in the scalar sector. We discuss the phenomenological consequences of these features.

Top-bottom doublet in the sphaleron background

CERN Document Server

Moreno, J M; Quirós, Mariano

1995-01-01

We consider the top-bottom doublet in the background of the sphaleron for the realistic case of large non-degeneracy of fermion masses, in particular m_b=5 GeV and m_t=175 GeV. We propose an axially symmetric (r,\\theta)-dependent ansatz for fermion fields and investigate the effects of the non-degeneracy on them. The exact solution is described, with an error less than 0.01\\%, by a set of ten radial functions. We also propose an approximate solution, in the m_b/m_t\\rightarrow 0 limit, with an error {\\cal O}(m_b/m_t). We have found that the effects of non-degeneracy provide a \\theta-dependence typically \\sim 10\\%.

Theory of singlet-doublet excitations in praseodymium

International Nuclear Information System (INIS)

Bak, P.

1975-10-01

The magnetic excitation spectrum in a paramagnetic singlet-doublet system is calculated using a diagrammatic high density expansion technique. The lowest order diagrams, which correspond to the random phase approximation (RPA), give a detailed description of the wave vector and temperature dependence of the four exciton modes in praseodymium in terms of a Hamiltonian including isotropic Heisenberg exchange interactions and anisotropic, dipolar-like interactions. The leading contributions to the linewidths of the excitations are obtained by extending the 1/Z expansion of the generalized susceptibility propagators one order beyond the random phase approximation. This damping corresponds to spin wave scattering on single-site fluctuations. The theoretical spectral functions are in detailed agreement with experiment

Relative brightness of the O+(2 D-2 P) doublets in low-energy aurorae

International Nuclear Information System (INIS)

Whiter, D. K.; Lanchester, B. S.; Gustavsson, B.; Jallo, N. I. B.; Jokiaho, O.; Dahlgren, H.; Ivchenko, N.

2014-01-01

The ratio of the emission line doublets from O + at 732.0 nm (I 732 ) and 733.0 nm (I 733 ) has been measured in auroral conditions of low-energy electron precipitation from Svalbard (78.°20 north, 15.°83 east). Accurate determination of R = I 732 /I 733 provides a powerful method for separating the density of the O + 2 P 1 /2,3 /2 o levels in modeling of the emissions from the doublets. A total of 383 spectra were included from the winter of 2003-2004. The value obtained is R = I 732 /I 733 = 1.38 ± 0.02, which is higher than theoretical values for thermal equilibrium in fully ionized plasma, but is lower than reported measurements by other authors in similar auroral conditions. The continuity equations for the densities of the two levels are solved for different conditions, in order to estimate the possible variations of R. The results suggest that the production of ions in the two levels from O ( 3 P 1 ) and O ( 3 P 2 ) does not follow the statistical weights, unlike astrophysical calculations for plasmas in nebulae. The physics of auroral impact ionization may account for this difference, and therefore for the raised value of R. In addition, the auroral solution of the densities of the ions, and thus of the value of R, is sensitive to the temperature of the neutral atmosphere. Although the present work is a statistical study, it shows that it is necessary to determine whether there are significant variations in the ratio resulting from non-equilibrium conditions, from auroral energy deposition, large electric fields, and changes in temperature and composition.

Positional stability experiment and analysis of elongated plasmas in Doublet III

International Nuclear Information System (INIS)

Yokomizo, Hideaki

1984-04-01

Control systems of the plasma position and shape on Doublet III are explained and experimental results of vertical stability of elongated plasmas are reviewed. Observed results of the vertical instability are qualitatively compared with the predictions from the simplified model and quantitatively compared with the numerical calculations based on a more realistic model. Experiments are in reasonable agreement with the theoretical analyses. (author)

Main line maser emission in the OH ground state Λdoublet as a result of overlapping far infrared transitions

International Nuclear Information System (INIS)

Pelling, M.

1977-01-01

Transitions 2πsub(1/2), j = 5/2, F = 3 → 2πsub(3/2), j = 3/2, F = 2 and 2πsub(1/2), j = 5/2, F = 2 → 2πsub(3/2), J = 3/2, F = 1 have overlapping Doppler line wings at a kinetic temperature of 100 K. This alters the transport of radiation in each line from that which would occur in the absence of line overlap. As a result, the upper levels of the ground state Λ-doublet become overpopulated. (author)

The Features of Moessbauer Spectra of Hemoglobins: Approximation by Superposition of Quadrupole Doublets or by Quadrupole Splitting Distribution?

International Nuclear Information System (INIS)

Oshtrakh, M. I.; Semionkin, V. A.

2004-01-01

Moessbauer spectra of hemoglobins have some features in the range of liquid nitrogen temperature: a non-Lorentzian asymmetric line shape for oxyhemoglobins and symmetric Lorentzian line shape for deoxyhemoglobins. A comparison of the approximation of the hemoglobin Moessbauer spectra by a superposition of two quadrupole doublets and by a distribution of the quadrupole splitting demonstrates that a superposition of two quadrupole doublets is more reliable and may reflect the non-equivalent iron electronic structure and the stereochemistry in the α- and β-subunits of hemoglobin tetramers.

Re-derived overclosure bound for the inert doublet model

Science.gov (United States)

Biondini, S.; Laine, M.

2017-08-01

We apply a formalism accounting for thermal effects (such as modified Sommerfeld effect; Salpeter correction; decohering scatterings; dissociation of bound states), to one of the simplest WIMP-like dark matter models, associated with an "inert" Higgs doublet. A broad temperature range T ˜ M/20 . . . M/104 is considered, stressing the importance and less-understood nature of late annihilation stages. Even though only weak interactions play a role, we find that resummed real and virtual corrections increase the tree-level overclosure bound by 1 . . . 18%, depending on quartic couplings and mass splittings.

Resuscitation of the three-scalar doublet model with spontaneous CP violation

International Nuclear Information System (INIS)

Branco, G.C.; Buras, A.J.; Gerard, J.M.

1985-01-01

We show that the three-scalar doublet model with spontaneous CP violation and natural flavor conservation can be made consistent with the recent measurements of epsilon'/epsilon provided an interesting hierarchy among the vacuum expectation values present in the model is assumed. Simultaneously ΔM(Ksub(L)-Ksub(S)), the epsilon parameter and the electric dipole moment of the neutron are consistent with the experimental data. (orig.)

The Higgs vacuum uplifted. Revisiting the electroweak phase transition with a second Higgs doublet

Energy Technology Data Exchange (ETDEWEB)

Dorsch, G.C. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Huber, S.J. [Sussex Univ., Brighton (United Kingdom). Dept. of Physics and Astronomy; Mimasu, K. [Sussex Univ., Brighton (United Kingdom). Dept. of Physics and Astronomy; Louvain Univ. Catholique, Louvain-la-Neuve (Belgium). Center for Cosmology, Particle Physics and Phenomenology; No, J.M. [King' s College, London (United Kingdom). Dept. of Physics; Sussex Univ., Brighton (United Kingdom). Dept. of Physics and Astronomy

2017-05-25

The existence of a second Higgs doublet in Nature could lead to a cosmological first order electroweak phase transition and explain the origin of the matter-antimatter asymmetry in the Universe. We explore the parameter space of such a two-Higgs-doublet-model and show that a first order electroweak phase transition strongly correlates with a significant uplifting of the Higgs vacuum w.r.t. its Standard Model value. We then obtain the spectrum and properties of the new scalars H{sub 0}, A{sub 0} and H{sup ±} that signal such a phase transition, showing that the decay A{sub 0}→H{sub 0}Z at the LHC and a sizable deviation in the Higgs self-coupling λ{sub hhh} from its SM value are sensitive indicators of a strongly first order electroweak phase transition in the 2HDM.

Baryogenesis in the two doublet and inert singlet extension of the Standard Model

Energy Technology Data Exchange (ETDEWEB)

Alanne, Tommi [CP" 3-Origins, University of Southern Denmark,Campusvej 55, DK-5230 Odense M (Denmark); Kainulainen, Kimmo [Department of Physics, University of Jyväskylä,P.O. Box 35 (YFL), FI-40014 Jyväskylä (Finland); Helsinki Institute of Physics, University of Helsinki,P.O. Box 64, FI-00014 Helsinki (Finland); Tuominen, Kimmo [Department of Physics, University of Helsinki,P.O. Box 64, FI-00014 Helsinki (Finland); Helsinki Institute of Physics, University of Helsinki,P.O. Box 64, FI-00014 Helsinki (Finland); Vaskonen, Ville [Department of Physics, University of Jyväskylä,P.O. Box 35 (YFL), FI-40014 Jyväskylä (Finland); Helsinki Institute of Physics, University of Helsinki,P.O. Box 64, FI-00014 Helsinki (Finland)

2016-08-25

We investigate an extension of the Standard Model containing two Higgs doublets and a singlet scalar field (2HDSM). We show that the model can have a strongly first-order phase transition and give rise to the observed baryon asymmetry of the Universe, consistent with all experimental constraints. In particular, the constraints from the electron and neutron electric dipole moments are less constraining here than in pure two-Higgs-doublet model (2HDM). The two-step, first-order transition in 2HDSM, induced by the singlet field, may lead to strong supercooling and low nucleation temperatures in comparison with the critical temperature, T{sub n}≪T{sub c}, which can significantly alter the usual phase-transition pattern in 2HD models with T{sub n}≈T{sub c}. Furthermore, the singlet field can be the dark matter particle. However, in models with a strong first-order transition its abundance is typically but a thousandth of the observed dark matter abundance.

Partially natural Two Higgs Doublet Models

Energy Technology Data Exchange (ETDEWEB)

Draper, Patrick [Department of Physics, University of California,Broida Hall, Santa Barbara, CA 93106 (United States); Haber, Howard E. [Santa Cruz Institute for Particle Physics, University of California,1156 High Street, Santa Cruz, CA 95064 (United States); Kavli Institute for Theoretical Physics, University of California,Kohn Hall, Santa Barbara, CA 93106 (United States); Ruderman, Joshua T. [Center for Cosmology and Particle Physics, Department of Physics, New York University,4 Washington Pl. New York, NY 10003 (United States)

2016-06-21

It is possible that the electroweak scale is low due to the fine-tuning of microscopic parameters, which can result from selection effects. The experimental discovery of new light fundamental scalars other than the Standard Model Higgs boson would seem to disfavor this possibility, since generically such states imply parametrically worse fine-tuning with no compelling connection to selection effects. We discuss counterexamples where the Higgs boson is light because of fine-tuning, and a second scalar doublet is light because a discrete symmetry relates its mass to the mass of the Standard Model Higgs boson. Our examples require new vectorlike fermions at the electroweak scale, and the models possess a rich electroweak vacuum structure. The mechanism that we discuss does not protect a small CP-odd Higgs mass in split or high-scale supersymmetry-breaking scenarios of the MSSM due to an incompatibility between the discrete symmetries and holomorphy.

Phylogenetic analysis of the core histone doublet and DNA topo II genes of Marseilleviridae: evidence of proto-eukaryotic provenance.

Science.gov (United States)

Erives, Albert J

2017-11-28

While the genomes of eukaryotes and Archaea both encode the histone-fold domain, only eukaryotes encode the core histone paralogs H2A, H2B, H3, and H4. With DNA, these core histones assemble into the nucleosomal octamer underlying eukaryotic chromatin. Importantly, core histones for H2A and H3 are maintained as neofunctionalized paralogs adapted for general bulk chromatin (canonical H2 and H3) or specialized chromatin (H2A.Z enriched at gene promoters and cenH3s enriched at centromeres). In this context, the identification of core histone-like "doublets" in the cytoplasmic replication factories of the Marseilleviridae (MV) is a novel finding with possible relevance to understanding the origin of eukaryotic chromatin. Here, we analyze and compare the core histone doublet genes from all known MV genomes as well as other MV genes relevant to the origin of the eukaryotic replisome. Using different phylogenetic approaches, we show that MV histone domains encode obligate H2B-H2A and H4-H3 dimers of possible proto-eukaryotic origin. MV core histone moieties form sister clades to each of the four eukaryotic clades of canonical and variant core histones. This suggests that MV core histone moieties diverged prior to eukaryotic neofunctionalizations associated with paired linear chromosomes and variant histone octamer assembly. We also show that MV genomes encode a proto-eukaryotic DNA topoisomerase II enzyme that forms a sister clade to eukaryotes. This is a relevant finding given that DNA topo II influences histone deposition and chromatin compaction and is the second most abundant nuclear protein after histones. The combined domain architecture and phylogenomic analyses presented here suggest that a primitive origin for MV histone genes is a more parsimonious explanation than horizontal gene transfers + gene fusions + sufficient divergence to eliminate relatedness to eukaryotic neofunctionalizations within the H2A and H3 clades without loss of relatedness to each of

28 CFR 3.5 - Forfeiture of gambling devices.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Forfeiture of gambling devices. 3.5 Section 3.5 Judicial Administration DEPARTMENT OF JUSTICE GAMBLING DEVICES § 3.5 Forfeiture of gambling devices. For purposes of seizure and forfeiture of gambling devices see section 8 of this chapter. [Order...

Three-dimensional magnetotelluric imaging of the 1997 Kagoshima earthquake doublet, Southwest Japan

Science.gov (United States)

Asamori, K.; Makuuchi, A.; Umeda, K.

2013-12-01

The 1997 Kagoshima earthquake doublet struck on unrecognized active faults lacking clear surface expression where very few large earthquakes have occurred. Two shallow moderate earthquakes occurred in the northwestern part of Kagoshima province, on March 26 (Mw 6.1) and May 13 (Mw 6.0) in 1997, both followed by intensive aftershock sequences. Aftershock distribution of the 1997 earthquake doublet reflects complicated rupture process attributed to the geological (rheological) conditions and coupling of hydraulic pressure as well as tectonic shear stress. For advanced understanding of dynamic interactions between fluids and faulting, it is imperative to obtain three-dimensional (3-D) images of the electrical resistivity structure around the seismogenic faults. In this study, we conduct magnetotelluric (MT) soundings in and around the source region of the 1997 Kagoshima earthquake sequence and perform a 3-D inversion of wideband MT data above a depth of 30 km. MT stations were deployed around the aftershock area of the 1997 Kagoshima earthquake. All of 42 MT sites were set up in the land area. The data were collected using five component (three magnetic and two telluric components) wide-band MT instruments (Phoenix MTU-5 system) in February, 2013. The data were acquired in the frequency range from 0.000343 to 320 Hz. The recording duration ranged from 2 to 8 days. As the cultural noises severely affect the measurements, the time series analysis focused on the nocturnal data when there were fewer noise. A simultaneous remote reference measurement was carried out at the Sawauchi site (1300 km northeast of the study area). Using the remote reference technique (Gamble et al., 1979), we were able to reduce the unfavorable cultural noises. The observed apparent resistivity and phase data were inverted simultaneously using the 3-D inversion code of Sasaki (2004). In this inversion, the 3-D blocks were set up in the crust and upper mantle. These block size in the horizontal

Random phase approximation: from Giant to Intra-doublet resonances

International Nuclear Information System (INIS)

Amusia, M.Ya.

2004-01-01

We discuss here the history and current achievements of one of the most powerful approaches of 20th century physics--the random phase approximation (RPA) that permits us to study collective or multiparticle effects in atoms, nuclei, molecules and clusters, as well as in quantum liquids. We concentrate on RPA application to studies of isolated atoms where it permits one to disclose the collective multielectron nature of so-called Giant resonances and predict a number of others, like Interference and Intra-doublet resonances. We present general theory as well as results of concrete calculations for a number of atoms

Random phase approximation: from Giant to Intra-doublet resonances

Energy Technology Data Exchange (ETDEWEB)

Amusia, M.Ya. E-mail: amusia@vms.huji.ac.il

2004-06-01

We discuss here the history and current achievements of one of the most powerful approaches of 20th century physics--the random phase approximation (RPA) that permits us to study collective or multiparticle effects in atoms, nuclei, molecules and clusters, as well as in quantum liquids. We concentrate on RPA application to studies of isolated atoms where it permits one to disclose the collective multielectron nature of so-called Giant resonances and predict a number of others, like Interference and Intra-doublet resonances. We present general theory as well as results of concrete calculations for a number of atoms.

Reopen parameter regions in two-Higgs doublet models

Science.gov (United States)

Staub, Florian

2018-01-01

The stability of the electroweak potential is a very important constraint for models of new physics. At the moment, it is standard for Two-Higgs doublet models (THDM), singlet or triplet extensions of the standard model to perform these checks at tree-level. However, these models are often studied in the presence of very large couplings. Therefore, it can be expected that radiative corrections to the potential are important. We study these effects at the example of the THDM type-II and find that loop corrections can revive more than 50% of the phenomenological viable points which are ruled out by the tree-level vacuum stability checks. Similar effects are expected for other extension of the standard model.

The Use of Source-Sink and Doublet Distributions Extended to the Solution of Boundary-Value Problems in Supersonic Flow

Science.gov (United States)

Heaslet, Max A; Lomax, Harvard

1948-01-01

A direct analogy is established between the use of source-sink and doublet distributions in the solution of specific boundary-value problems in subsonic wing theory and the corresponding problems in supersonic theory. The correct concept of the "finite part" of an integral is introduced and used in the calculation of the improper integrals associated with supersonic doublet distributions. The general equations developed are shown to include several previously published results and particular examples are given for the loading on rolling and pitching triangular wings with supersonic leading edges.

CP violation in a multi-Higgs-doublet model with flavor-changing neutral currents

International Nuclear Information System (INIS)

Deshpande, N.G.; He, X.

1994-01-01

We study CP violation in multi-Higgs-doublet model based on a S 3 xZ 3 horizontal symmetry where the CKM phase is not the principal source of CP violation. We consider two mechanisms for CP violation in this model: (a) CP violation due to complex Yukawa couplings, and (b) CP violation due to scalar-pseudoscalar Higgs boson mixings. Both mechanisms can explain the observed CP violation in the neutral kaon system. ε'/ε due to neutral Higgs boson exchange is small in both mechanisms, but charged Higgs boson contributions can be as large as 10 -4 for (a) and 10 -3 for (b). CP violation in the neutral B system is, however, quite different from the minimal standard model. The neutron electric dipole moment can be as large as the present experimental bound, and can be used to constrain charged Higgs boson masses. The electron EDM is one order of magnitude below the experimental bound in case (b) and smaller in case (a)

Doublet Pulse Coherent Laser Radar for Tracking of Resident Space Objects

Science.gov (United States)

2014-09-01

any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a...tracking 10 cm2 cross section targets in LEO as well as tracking near Earth objects (NEOs) such as meteoroids, and asteroids may well be possible...using short pulsewidth doublet pulse coherent ladar technique offers a means for precision tracking. The technique offers best of both worlds ; precise

Pseudo-Goldstone Higgs Doublets from Non-Vectorlike Grand Unified Higgs Sector

CERN Document Server

Hernández, A E Cárcamo

2016-01-01

We present a novel way of realizing the pseudo-Nambu-Goldstone boson mechanism for the doublet-triplet splitting in supersymmetric grand unified theories. The global symmetries of the Higgs sector are attributed to a non-vectorlike Higgs content, which is consistent with unbroken supersymmetry in a scenario with flat extra dimensions and branes. We also show how in such a model one can naturally obtain a realistic pattern for the Standard Model fermion masses and mixings.

3D-printed Bioanalytical Devices

Science.gov (United States)

Bishop, Gregory W; Satterwhite-Warden, Jennifer E; Kadimisetty, Karteek; Rusling, James F

2016-01-01

While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices. PMID:27250897

Neutral beam program

International Nuclear Information System (INIS)

Anon.

1979-01-01

The structure of the beam injection program for the Doublet-3 device is discussed. The design considerations for the beam line and design parameters for the Doublet-3 ion souce are given. Major components of the neutral beam injector system are discussed in detail. These include the neutralizer, magnetic shielding, reflecting magnets, vacuum system, calorimeter and beam dumps, and drift duct. The planned location of the two-injector system for Doublet-3 is illustrated and site preparation is considered. The status of beamline units 1 and 2 and the future program schedule are discussed

Status of the charged Higgs boson in two Higgs doublet models

Science.gov (United States)

Arbey, A.; Mahmoudi, F.; Stål, O.; Stefaniak, T.

2018-03-01

The existence of charged Higgs boson(s) is inevitable in models with two (or more) Higgs doublets. Hence, their discovery would constitute unambiguous evidence for new physics beyond the Standard Model (SM). Taking into account all relevant results from direct charged and neutral Higgs boson searches at LEP and the LHC, as well as the most recent constraints from flavour physics, we present a detailed analysis of the current phenomenological status of the charged Higgs sector in a variety of well-motivated two Higgs doublet models (2HDMs). We find that charged Higgs bosons as light as 75 GeV can still be compatible with the combined data, although this implies severely suppressed charged Higgs couplings to all fermions. In more popular models, e.g. the 2HDM of Type II, we find that flavour physics observables impose a combined lower limit on the charged Higgs mass of M_{H^± } ≳ 600 GeV - independent of tan β - which increases to M_{H^± } ≳ 650 GeV for tan β < 1. We furthermore find that in certain scenarios, the signature of a charged Higgs boson decaying into a lighter neutral Higgs boson and a W boson provides a promising experimental avenue that would greatly complement the existing LHC search programme for charged Higgs boson(s).

Status of the charged Higgs boson in two Higgs doublet models

International Nuclear Information System (INIS)

Arbey, A.; Mahmoudi, F.; Stefaniak, T.; Staal, O.

2018-01-01

The existence of charged Higgs boson(s) is inevitable in models with two (or more) Higgs doublets. Hence, their discovery would constitute unambiguous evidence for new physics beyond the Standard Model (SM). Taking into account all relevant results from direct charged and neutral Higgs boson searches at LEP and the LHC, as well as the most recent constraints from flavour physics, we present a detailed analysis of the current phenomenological status of the charged Higgs sector in a variety of well-motivated two Higgs doublet models (2HDMs). We find that charged Higgs bosons as light as 75 GeV can still be compatible with the combined data, although this implies severely suppressed charged Higgs couplings to all fermions. In more popular models, e.g. the 2HDM of Type II, we find that flavour physics observables impose a combined lower limit on the charged Higgs mass of M H ± > or similar 600 GeV - independent of tan β - which increases to M H ± > or similar 650 GeV for tan β < 1. We furthermore find that in certain scenarios, the signature of a charged Higgs boson decaying into a lighter neutral Higgs boson and a W boson provides a promising experimental avenue that would greatly complement the existing LHC search programme for charged Higgs boson(s). (orig.)

Photoluminescence Detected Doublet Structure in the Integer and Fractional Quantum Hall Regime

International Nuclear Information System (INIS)

Kim, Yongmin; Munteanu, F.M.; Perry, C.H.; Reno, J.L.; Rickel, D.G.; Simmons, J.A.

1999-01-01

We present here the results of polarized magneto-photoluminescence measurements on a high mobility single-heterojunction. The presence of a doublet structure over a large magnetic field range (2>v>l/6) is interpreted as possible evidence for the existence of a magneto-roton minima of the charged density waves. This is understood as an indication of strong electronic correlation even in the case of the IQHE limit

Evaluating a Prefabricated Submerged Breakwater and Double-T Sill for Beach Erosion Prevention, Cape May Point, NJ

National Research Council Canada - National Science Library

Stauble, Donald K; Giovannozzi, Michael A

2003-01-01

...) and a linear prefabricated concrete sill called the Double-T across the seaward end of two adjacent groin compartments, in order to assess the effectiveness of these structures in retaining sand...

Global fits of the two-loop renormalized Two-Higgs-Doublet model with soft Z 2 breaking

Science.gov (United States)

Chowdhury, Debtosh; Eberhardt, Otto

2015-11-01

We determine the next-to-leading order renormalization group equations for the Two-Higgs-Doublet model with a softly broken Z 2 symmetry and CP conservation in the scalar potential. We use them to identify the parameter regions which are stable up to the Planck scale and find that in this case the quartic couplings of the Higgs potential cannot be larger than 1 in magnitude and that the absolute values of the S-matrix eigenvalues cannot exceed 2 .5 at the electroweak symmetry breaking scale. Interpreting the 125 GeV resonance as the light CP -even Higgs eigenstate, we combine stability constraints, electroweak precision and flavour observables with the latest ATLAS and CMS data on Higgs signal strengths and heavy Higgs searches in global parameter fits to all four types of Z 2 symmetry. We quantify the maximal deviations from the alignment limit and find that in type II and Y the mass of the heavy CP -even ( CP -odd) scalar cannot be smaller than 340 GeV (360 GeV). Also, we pinpoint the physical parameter regions compatible with a stable scalar potential up to the Planck scale. Motivated by the question how natural a Higgs mass of 125 GeV can be in the context of a Two-Higgs-Doublet model, we also address the hierarchy problem and find that the Two-Higgs-Doublet model does not offer a perturbative solution to it beyond 5 TeV.

Design and expression of a retro doublet of cecropin with enhanced activity

OpenAIRE

Díaz, Mauricio; Arenas, Gloria; Marshall, Sergio H

2008-01-01

Novel doublet molecules of cecropin A from Drosophila melanogaster were designed and constructed combining the regular (CECdir) with the inverted (CECret) coding sequence of the standard CEC A1 gene resulting in the following configurations: CECdir-CECret and CECret-CECdir. These two recombinant molecules were generated using a three-primer driven PCR reaction yielding composite single functional aminoacidic molecules with the coding sequences of CECdir linked in frame with the coding sequenc...

Impurity studies and discharge cleaning in Doublet III

Energy Technology Data Exchange (ETDEWEB)

Marcus, F.B.

1979-10-01

The goal of present and next generation tokamak experiments is to produce high-density, high-purity plasmas during high-power, extended-duration discharges. Plasma discharges with Z/sub eff/ values near unity and low concentrations of medium and high-Z metallic impurities have been obtained in Doublet III using a combination of low-power hydrogen discharge cleaning, gas puffing, precise plasma shape and position control, and high-Z limiters. Analysis of the first wall surface and residual gas impurities confirmed that clean conditions have been achieved. The high-Z limiters showed very limited amounts of melting or arcing. The progress of the wall cleaning process was monitored by three diagnostic techniques: Auger electron spectroscopy of metallic samples at the vessel wall, residual gas analysis, and the resistivity of full power discharges.

Impurity studies and discharge cleaning in Doublet III

International Nuclear Information System (INIS)

Marcus, F.B.

1979-10-01

The goal of present and next generation tokamak experiments is to produce high-density, high-purity plasmas during high-power, extended-duration discharges. Plasma discharges with Z/sub eff/ values near unity and low concentrations of medium and high-Z metallic impurities have been obtained in Doublet III using a combination of low-power hydrogen discharge cleaning, gas puffing, precise plasma shape and position control, and high-Z limiters. Analysis of the first wall surface and residual gas impurities confirmed that clean conditions have been achieved. The high-Z limiters showed very limited amounts of melting or arcing. The progress of the wall cleaning process was monitored by three diagnostic techniques: Auger electron spectroscopy of metallic samples at the vessel wall, residual gas analysis, and the resistivity of full power discharges

Spatial Distribution of Ground water Level Changes Induced by the 2006 Hengchun Earthquake Doublet

Directory of Open Access Journals (Sweden)

Yeeping Chia

2009-01-01

Full Text Available Water-level changes were ob served in 107 wells at 67 monitoring stations in the southern coastal plain of Tai wan during the 2006 Mw 7.1 Hengchun earthquake doublet. Two consecutive coseismic changes induced by the earth quake doublet can be observed from high-frequency data. Obervations from multiple-well stations indicate that the magnitude and direction of coseismic change may vary in wells of different depths. Coseismic rises were dominant on the south east side of the costal plain; whereas, coseismic falls prevailed on the north west side. In the transition zone, rises appeared in shallow wells whilst falls were evident in deep wells. As coseismic ground water level changes can reflect the tectonic strain field, tectonic extension likely dominates the deep subsurface in the transition area, and possibly in the en tire southern coastal plain. The coseismic rises in water level showed a tendency to de crease with distance from the hypocenter, but no clear trend was found for the coseismic falls.

Signal-to-solar clutter calculations of AK-47 muzzle flash at various spectral bandpasses near the potassium D1/D2 doublet

Science.gov (United States)

Klett, Karl K., Jr.

2010-04-01

An analysis was performed, using MODTRAN, to determine the best filters to use for detecting the muzzle flash of an AK-47 in daylight conditions in the desert. Filters with bandwidths of 0.05, 0.1, 0.5, 1.0, 3.0, and 5.0 nanometers (nm) were analyzed to understand how the optical bandwidth affects the signal-to-solar clutter ratio. These filters were evaluated near the potassium D1 and D2 doublet emission lines that occur at 769.89 and 766.49 nm respectively that are observed where projectile propellants are used. The maximum spectral radiance, from the AK-47 muzzle flash, is 1.88 x 10-2 W/cm2 str micron, and is approximately equal to the daytime atmospheric spectral radiance. The increased emission, due to the potassium doublet lines, and decreased atmospheric transmission, due to oxygen absorption, combine to create a condition where the signal-to-solar clutter ratio is greater than 1. The 3 nm filter, has a signal-to-solar clutter ratio of 2.09 when centered at 765.37 nm and provides the best combination of both cost and signal sensitivity.

''Big Dee'' upgrade of the Doublet III diagnostic data acquisition computer system

International Nuclear Information System (INIS)

Mcharg, B.B.

1983-01-01

The ''Big Dee'' upgrade of the Doublet III tokamak facility will begin operation in 1986 with an initial quantity of data expected to be 10 megabytes per shot and eventually attaining 20-25 megabytes per shot. This is in comparison to the 4-5 megabytes of data currently acquired. To handle this greater quantity of data and to serve physics needs for significantly improved between-shot processing of data will require a substantial upgrade of the existing data acquisition system. The key points of the philosophy that have been adopted for the upgraded system to handle the greater quantity of data are (1) preserve existing hardware, (2) preserve existing software; (3) configure the system in a modular fashion; and (4) distribute the data acquisition over multiple computers. The existing system using ModComp CLASSIC 16 bit minicomputers is capable of handling 5 megabytes of data per shot

Big Dee upgrade of the Doublet III diagnostic data acquisition computer system

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1983-12-01

The Big Dee upgrade of the Doublet III tokamak facility will begin operation in 1986 with an initial quantity of data expected to be 10 megabytes per shot and eventually attaining 20 to 25 megabytes per shot. This is in comparison to the 4 to 5 megabytes of data currently acquired. To handle this greater quantity of data and to serve physics needs for significantly improved between-shot processing of data will require a substantial upgrade of the existing data acquisition system. The key points of the philosophy that have been adopted for the upgraded system to handle the greater quantity of data are (1) preserve existing hardware; (2) preserve existing software; (3) configure the system in a modular fashion; and (4) distribute the data acquisition over multiple computers. The existing system using ModComp CLASSIC 16 bit minicomputers is capable of handling 5 megabytes of data per shot

3D Ceramic Microfluidic Device Manufacturing

International Nuclear Information System (INIS)

Natarajan, Govindarajan; Humenik, James N

2006-01-01

Today, semiconductor processing serves as the backbone for the bulk of micromachined devices. Precision lithography and etching technology used in the semiconductor industry are also leveraged by alternate techniques like electroforming and molding. The nature of such processing is complex, limited and expensive for any manufacturing foundry. This paper details the technology elements developed to manufacture cost effective and versatile microfluidic devices for applications ranging from medical diagnostics to characterization of bioassays. Two applications using multilayer ceramic technology to manufacture complex 3D microfluidic devices are discussed

Separate μ- and e-lepton numbers non-conservation in the Weinberg model with two higgs doublets

International Nuclear Information System (INIS)

Branco, G.C.

1977-03-01

It is shown that in the Weinberg-Salam model with two Higgs doublets, one is naturally led to the violation of separate μ and e-lepton numbers. The branching ratio for μ → eγ is found to be comparable to the present experimental limit. (orig.) [de

Effects of Constant and Doublet Frequency Electrical Stimulation Patterns on Force Production of Knee Extensor Muscles.

Directory of Open Access Journals (Sweden)

Carole Cometti

Full Text Available This study compared knee extensors' neuromuscular fatigue in response to two 30-minute stimulation patterns: constant frequency train (CFT and doublet frequency train (DFT. Fifteen men underwent two separate sessions corresponding to each pattern. Measurements included torque evoked by each contraction and maximal voluntary contractions (MVC measured before and immediately after the stimulation sessions. In addition, activation level and torque evoked during doublets (Pd and tetanic contractions at 80-Hz (P80 and 20-Hz (P20 were determined in six subjects. Results indicated greater mean torque during the DFT stimulation session as compared with CFT. But, no difference was obtained between the two stimulation patterns for MVC and evoked torque decreases. Measurements conducted in the subgroup depicted a significant reduction of Pd, P20 and P80. Statistical analyses also revealed bigger P20 immediate reductions after CFT than after DFT. We concluded that DFT could be a useful stimulation pattern to produce and maintain greater force with quite similar fatigue than CFT.

Direct and indirect singlet scalar dark matter detection in the lepton-specific two-Higgs-doublet model

International Nuclear Information System (INIS)

Boucenna, M. S.; Profumo, S.

2011-01-01

A recent study of gamma-ray data from the Galactic center motivates the investigation of light (∼7-10 GeV) particle dark matter models featuring tau-lepton pairs as dominant annihilation final state. The lepton-specific two-Higgs-doublet model provides a natural framework where light, singlet scalar dark matter can pair-annihilate dominantly into tau leptons. We calculate the nucleon-dark matter cross section for singlet scalar dark matter within the lepton-specific two-Higgs-doublet model framework, and compare with recent results from direct detection experiments. We study how direct dark matter searches can be used to constrain the dark matter interpretation of gamma-ray observations, for different dominant annihilation final states. We show that models exist with the correct thermal relic abundance that could fit the claimed gamma-ray excess from the Galactic center region and have direct detection cross sections of the order of what is needed to interpret recent anomalous events reported by direct detection experiments.

Study of vibrations and stabilization of linear collider final doublets at the sub-nanometer scale

International Nuclear Information System (INIS)

Bolzon, B.

2007-11-01

CLIC is one of the current projects of high energy linear colliders. Vertical beam sizes of 0.7 nm at the time of the collision and fast ground motion of a few nanometers impose an active stabilization of the final doublets at a fifth of nanometer above 4 Hz. The majority of my work concerned vibrations and active stabilization study of cantilever and slim beams in order to be representative of the final doublets of CLIC. In a first part, measured performances of different types of vibration sensors associated to an appropriate instrumentation showed that accurate measurements of ground motion are possible from 0.1 Hz up to 2000 Hz on a quiet site. Also, electrochemical sensors answering a priori the specifications of CLIC can be incorporated in the active stabilization at a fifth of nanometer. In a second part, an experimental and numerical study of beam vibrations enabled to validate the efficiency of the numerical prediction incorporated then in the simulation of the active stabilization. Also, a study of the impact of ground motion and of acoustic noise on beam vibrations showed that an active stabilization is necessary at least up to 1000 Hz. In a third part, results on the active stabilization of a beam at its two first resonances are shown down to amplitudes of a tenth of nanometer above 4 Hz by using in parallel a commercial system performing passive and active stabilization of the clamping. The last part is related to a study of a support for the final doublets of a linear collider prototype in phase of finalization, the ATF2 prototype. This work showed that relative motion between this support and the ground is below imposed tolerances (6 nm above 0.1 Hz) with appropriate boundary conditions. (author)

Relative brightness of the O{sup +}({sup 2} D-{sup 2} P) doublets in low-energy aurorae

Energy Technology Data Exchange (ETDEWEB)

Whiter, D. K. [Finnish Meteorological Institute, Erik Palménin Aukio 1, FI-00560 Helsinki (Finland); Lanchester, B. S.; Gustavsson, B.; Jallo, N. I. B.; Jokiaho, O.; Dahlgren, H. [School of Physics and Astronomy, University of Southampton, SO17 1BJ (United Kingdom); Ivchenko, N., E-mail: daniel.whiter@fmi.fi [Royal Institute of Technology (KTH), Teknikringen 31, SE-100 44 Stockholm (Sweden)

2014-12-10

The ratio of the emission line doublets from O{sup +} at 732.0 nm (I {sub 732}) and 733.0 nm (I {sub 733}) has been measured in auroral conditions of low-energy electron precipitation from Svalbard (78.°20 north, 15.°83 east). Accurate determination of R = I {sub 732}/I {sub 733} provides a powerful method for separating the density of the O{sup +} {sup 2} P{sub 1} {sub /2,3} {sub /2}{sup o} levels in modeling of the emissions from the doublets. A total of 383 spectra were included from the winter of 2003-2004. The value obtained is R = I {sub 732}/I {sub 733} = 1.38 ± 0.02, which is higher than theoretical values for thermal equilibrium in fully ionized plasma, but is lower than reported measurements by other authors in similar auroral conditions. The continuity equations for the densities of the two levels are solved for different conditions, in order to estimate the possible variations of R. The results suggest that the production of ions in the two levels from O ({sup 3} P {sub 1}) and O ({sup 3} P {sub 2}) does not follow the statistical weights, unlike astrophysical calculations for plasmas in nebulae. The physics of auroral impact ionization may account for this difference, and therefore for the raised value of R. In addition, the auroral solution of the densities of the ions, and thus of the value of R, is sensitive to the temperature of the neutral atmosphere. Although the present work is a statistical study, it shows that it is necessary to determine whether there are significant variations in the ratio resulting from non-equilibrium conditions, from auroral energy deposition, large electric fields, and changes in temperature and composition.

Real-world hospital costs for nonchemotherapy drugs and nondrug care associated with platinum-based doublets in the first-line setting for advanced nonsquamous non-small-cell lung cancer in Chinese patients: a retrospective cohort study

Directory of Open Access Journals (Sweden)

Chen JH

2016-04-01

Full Text Available Jianhua Chen,1 Shengqi Wu,2 Chenping Hu,3 Yicheng Yang,4 Narayan Rajan,5 Yun Chen,4 Canjuan Yang,6 Jianfeng Li,6 Wendong Chen7 1Department of Medical Oncology, 2Department of Research and Education, Hunan Province Tumor Hospital, 3Department of Respiratory, Xiangya Hospital, Central South University, Changsha, Hunan, 4Lilly Suzhou Pharmaceutical Co., Ltd. Shanghai Branch, Shanghai, People's Republic of China; 5Global Health Outcomes Research, Eli Lilly and Co, Indianapolis, IN, USA; 6Division of Health Outcome Research, Normin Health Changsha Representative Office, Changsha, Hunan, People's Republic of China; 7Normin Health, Toronto, ON, Canada Objective: The objective of this study was to compare hospital costs per treatment cycle (HCTC for nonchemotherapy drugs and nondrug care associated with platinum-based doublets in the first-line setting for advanced nonsquamous non-small-cell lung cancer (AdvNS-NSCLC in Chinese patients. Methods: Patients receiving platinum-based doublets in the first-line setting for AdvNS-NSCLC from 2010 to 2012 in two Chinese tertiary hospitals were identified to create the retrospective study cohort. Propensity score methods were used to create matched treatment groups for head-to-head comparisons on HCTC between pemetrexed–platinum and other platinum-based doublets. Multiple linear regression analyses were performed to rank studied platinum-based doublets for their associations with the log10 scale of HCTC for nonchemotherapy drugs and nondrug care. Results: Propensity score methods created matched treatment groups for pemetrexed–platinum versus docetaxel–platinum (61 pairs, paclitaxel–platinum (39 pairs, gemcitabine–platinum (93 pairs, and vinorelbine–platinum (73 pairs, respectively. Even though the log10 scale of HCTC for nonchemotherapy drugs and nondrug care associated with pemetrexed–platinum was ranked lowest in all patients (coefficient –0.174, P=0.015, which included patients experiencing

Review of the conceptual design of a Doublet fusion experimental power reactor

International Nuclear Information System (INIS)

Baker, C.C.

1976-01-01

The results of a two-year, conceptual design study of a fusion experimental power reactor (EPR) are presented. For this study, the primary objectives of the EPR are to obtain plasma ignition conditions and produce net electrical power. The design features a Doublet plasma configuration with a major radius of 4.5 m. The average plasma beta is 10 percent which yields a thermonuclear power level of 410 MW during a 105-sec burn period. With a duty factor of 0.84, the gross electrical output is 124 MW(e) while the net output is 37 MW(e). The design features a 25-cm-thick, helium-cooled, modular, stainless-steel blanket with a 1-cm-thick, silicon carbide first wall. Sufficient shielding is provided to permit contact maintenance outside the shield envelope within 24 hr after shutdown. An overall plant concept has been developed including a superheated steam cycle power conversion system. Preliminary cost estimates and construction schedules have also been developed. 3 refs

A second Higgs doublet in the early universe. Baryogenesis and gravitational waves

International Nuclear Information System (INIS)

Dorsch, G.C.; Konstandin, T.; Huber, S.J.; No, J.M.; King's College, London

2016-11-01

We show that simple Two Higgs Doublet models still provide a viable explanation for the matter-antimatter asymmetry of the Universe via electroweak baryogenesis, even after taking into account the recent order-of-magnitude improvement on the electron-EDM experimental bound by the ACME Collaboration. Moreover we show that, in the region of parameter space where baryogenesis is possible, the gravitational wave spectrum generated at the end of the electroweak phase transition is within the sensitivity reach of the future space-based interferometer LISA.

A second Higgs doublet in the early universe. Baryogenesis and gravitational waves

Energy Technology Data Exchange (ETDEWEB)

Dorsch, G.C.; Konstandin, T. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Huber, S.J. [Sussex Univ., Brighton (United Kingdom). Dept. of Physics and Astronomy; No, J.M. [Sussex Univ., Brighton (United Kingdom). Dept. of Physics and Astronomy; King' s College, London (United Kingdom). Dept. of Physics

2016-11-15

We show that simple Two Higgs Doublet models still provide a viable explanation for the matter-antimatter asymmetry of the Universe via electroweak baryogenesis, even after taking into account the recent order-of-magnitude improvement on the electron-EDM experimental bound by the ACME Collaboration. Moreover we show that, in the region of parameter space where baryogenesis is possible, the gravitational wave spectrum generated at the end of the electroweak phase transition is within the sensitivity reach of the future space-based interferometer LISA.

A second Higgs doublet in the early universe: baryogenesis and gravitational waves

Energy Technology Data Exchange (ETDEWEB)

Dorsch, G.C.; Konstandin, T. [DESY, Notkestraße 85, D-22607 Hamburg (Germany); Huber, S.J.; No, J.M., E-mail: glauber.dorsch@desy.de, E-mail: s.huber@sussex.ac.uk, E-mail: thomas.konstandin@desy.de, E-mail: jose_miguel.no@kcl.ac.uk [Department of Physics and Astronomy, University of Sussex, Brighton BN1 9QH (United Kingdom)

2017-05-01

We show that simple Two Higgs Doublet models might still provide a viable explanation for the matter-antimatter asymmetry of the Universe via electroweak baryogenesis, even after taking into account the recent order-of-magnitude improvement on the electron-EDM experimental bound by the ACME Collaboration. Moreover we show that, in the region of parameter space where baryogenesis may be possible, the gravitational wave spectrum generated at the end of the electroweak phase transition is within the sensitivity reach of the future space-based interferometer LISA.

Three-dimensional heat transfer analysis of the Doublet III beamline calorimeter

International Nuclear Information System (INIS)

Kamperschroer, J.H.; Pipkins, J.F.

1979-10-01

A general three-dimensional analysis has been formulated to study the flow of heat in a neutral beam calorimeter. The boundary value problem with an arbitrary incident heat flux has been solved using Fourier analysis and Laplace transform techniques. A general solution has been obtained and subsequently studied using numerical techniques as applied to the particular geometry and incident heat flux conditions of the Doublet III injection system. Negligible errors result in unfolding the incident heat flux through the use of thermocouples located near the rear surface, if data taking is initiated at the proper time and proceeds at a sufficiently rapid rate

Muon g−2 in the aligned two Higgs doublet model

Energy Technology Data Exchange (ETDEWEB)

Han, Tao [Department of Physics and Astronomy, University of Pittsburgh,Pittsburgh, PA 15260 (United States); Physics Department, Collaborative Innovation Center of Quantum Matter, Tsinghua University,Beijing 100084 (China); Korea Institute for Advanced Study,Seoul 130-722 (Korea, Republic of); Kang, Sin Kyu [School of Liberal Arts, Seoul National University of Science and Technology,Seoul 139-743 (Korea, Republic of); Sayre, Joshua [Department of Physics and Astronomy, University of Pittsburgh,Pittsburgh, PA 15260 (United States)

2016-02-16

We study the Two-Higgs-Doublet Model with the aligned Yukawa sector (A2HDM) in light of the observed excess measured in the muon anomalous magnetic moment. We take into account the existing theoretical and experimental constraints with up-to-date values and demonstrate that a phenomenologically interesting region of parameter space exists. With a detailed parameter scan, we show a much larger region of viable parameter space in this model beyond the limiting case Type X 2HDM as obtained before. It features the existence of light scalar states with masses 3 GeV≲m{sub H}≲50 GeV, or  10 GeV≲m{sub A}≲130 GeV, with enhanced couplings to tau leptons. The charged Higgs boson is typically heavier, with 200 GeV≲m{sub H{sup +}}≲630 GeV. The surviving parameter space is forced into the CP-conserving limit by EDM constraints. Some Standard Model observables may be significantly modified, including a possible new decay mode of the SM-like Higgs boson to four taus. We comment on future measurements and direct searches for those effects at the LHC as tests of the model.

Metrological characterization of 3D imaging devices

Science.gov (United States)

Guidi, G.

2013-04-01

Manufacturers often express the performance of a 3D imaging device in various non-uniform ways for the lack of internationally recognized standard requirements for metrological parameters able to identify the capability of capturing a real scene. For this reason several national and international organizations in the last ten years have been developing protocols for verifying such performance. Ranging from VDI/VDE 2634, published by the Association of German Engineers and oriented to the world of mechanical 3D measurements (triangulation-based devices), to the ASTM technical committee E57, working also on laser systems based on direct range detection (TOF, Phase Shift, FM-CW, flash LADAR), this paper shows the state of the art about the characterization of active range devices, with special emphasis on measurement uncertainty, accuracy and resolution. Most of these protocols are based on special objects whose shape and size are certified with a known level of accuracy. By capturing the 3D shape of such objects with a range device, a comparison between the measured points and the theoretical shape they should represent is possible. The actual deviations can be directly analyzed or some derived parameters can be obtained (e.g. angles between planes, distances between barycenters of spheres rigidly connected, frequency domain parameters, etc.). This paper shows theoretical aspects and experimental results of some novel characterization methods applied to different categories of active 3D imaging devices based on both principles of triangulation and direct range detection.

Study of vibrations and stabilization of linear collider final doublets at the sub-nanometer scale; Etude des vibrations et de la stabilisation a l'echelle sous-nanometrique des doublets finaux d'un collisionneur lineaire

Energy Technology Data Exchange (ETDEWEB)

Bolzon, B

2007-11-15

CLIC is one of the current projects of high energy linear colliders. Vertical beam sizes of 0.7 nm at the time of the collision and fast ground motion of a few nanometers impose an active stabilization of the final doublets at a fifth of nanometer above 4 Hz. The majority of my work concerned vibrations and active stabilization study of cantilever and slim beams in order to be representative of the final doublets of CLIC. In a first part, measured performances of different types of vibration sensors associated to an appropriate instrumentation showed that accurate measurements of ground motion are possible from 0.1 Hz up to 2000 Hz on a quiet site. Also, electrochemical sensors answering a priori the specifications of CLIC can be incorporated in the active stabilization at a fifth of nanometer. In a second part, an experimental and numerical study of beam vibrations enabled to validate the efficiency of the numerical prediction incorporated then in the simulation of the active stabilization. Also, a study of the impact of ground motion and of acoustic noise on beam vibrations showed that an active stabilization is necessary at least up to 1000 Hz. In a third part, results on the active stabilization of a beam at its two first resonances are shown down to amplitudes of a tenth of nanometer above 4 Hz by using in parallel a commercial system performing passive and active stabilization of the clamping. The last part is related to a study of a support for the final doublets of a linear collider prototype in phase of finalization, the ATF2 prototype. This work showed that relative motion between this support and the ground is below imposed tolerances (6 nm above 0.1 Hz) with appropriate boundary conditions. (author)

Explaining the 3.5 keV X-ray line in a Lμ‑Lτ extension of the inert doublet model

Science.gov (United States)

Biswas, Anirban; Choubey, Sandhya; Covi, Laura; Khan, Sarif

2018-02-01

We explain the existence of neutrino masses and their flavour structure, dark matter relic abundance and the observed 3.5 keV X-ray line within the framework of a gauged U(1)Lμ ‑ Lτ extension of the "scotogenic" model. In the U(1)Lμ ‑ Lτ symmetric limit, two of the RH neutrinos are degenerate in mass, while the third is heavier. The U(1)Lμ ‑ Lτ symmetry is broken spontaneously. Firstly, this breaks the μ‑τ symmetry in the light neutrino sector. Secondly, this results in mild splitting of the two degenerate RH neutrinos, with their mass difference given in terms of the U(1)Lμ ‑ Lτ breaking parameter. Finally, we get a massive Zμτ gauge boson. Due to the added Z2 symmetry under which the RH neutrinos and the inert doublet are odd, the canonical Type-I seesaw is forbidden and the tiny neutrino masses are generated radiatively at one loop. The same Z2 symmetry also ensures that the lightest RH neutrino is stable and the other two can only decay into the lightest one. This makes the two nearly-degenerate lighter neutrinos a two-component dark matter, which in our model are produced by the freeze-in mechanism via the decay of the Zμτ gauge boson in the early universe. We show that the next-to-lightest RH neutrino has a very long lifetime and decays into the lightest one at the present epoch explaining the observed 3.5 keV line.

Lepton Flavor Violation in the Two Higgs Doublet Model using g-2 muon factor

International Nuclear Information System (INIS)

Diaz, Rodolfo A.; Martinez, R.; Rodriguez, J.-Alexis; Tuiran, E.

2002-01-01

Current experimental data from the g-2 muon factor, seems to show the necessity of physics beyond the Standard Model (SM), since the difference between SM and experimental predictions is approximately 2.6σ. In the framework of the General Two Higgs Doublet Model (2HDM), we calculate the muon anomalous magnetic moment to get lower and upper bounds for the Flavour Changing (FC) Yukawa couplings in the leptonic sector

3D Printed Photoresponsive Devices Based on Shape Memory Composites.

Science.gov (United States)

Yang, Hui; Leow, Wan Ru; Wang, Ting; Wang, Juan; Yu, Jiancan; He, Ke; Qi, Dianpeng; Wan, Changjin; Chen, Xiaodong

2017-09-01

Compared with traditional stimuli-responsive devices with simple planar or tubular geometries, 3D printed stimuli-responsive devices not only intimately meet the requirement of complicated shapes at macrolevel but also satisfy various conformation changes triggered by external stimuli at the microscopic scale. However, their development is limited by the lack of 3D printing functional materials. This paper demonstrates the 3D printing of photoresponsive shape memory devices through combining fused deposition modeling printing technology and photoresponsive shape memory composites based on shape memory polymers and carbon black with high photothermal conversion efficiency. External illumination triggers the shape recovery of 3D printed devices from the temporary shape to the original shape. The effect of materials thickness and light density on the shape memory behavior of 3D printed devices is quantified and calculated. Remarkably, sunlight also triggers the shape memory behavior of these 3D printed devices. This facile printing strategy would provide tremendous opportunities for the design and fabrication of biomimetic smart devices and soft robotics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

3D printing functional materials and devices (Conference Presentation)

Science.gov (United States)

McAlpine, Michael C.

2017-05-01

The development of methods for interfacing high performance functional devices with biology could impact regenerative medicine, smart prosthetics, and human-machine interfaces. Indeed, the ability to three-dimensionally interweave biological and functional materials could enable the creation of devices possessing unique geometries, properties, and functionalities. Yet, most high quality functional materials are two dimensional, hard and brittle, and require high crystallization temperatures for maximal performance. These properties render the corresponding devices incompatible with biology, which is three-dimensional, soft, stretchable, and temperature sensitive. We overcome these dichotomies by: 1) using 3D printing and scanning for customized, interwoven, anatomically accurate device architectures; 2) employing nanotechnology as an enabling route for overcoming mechanical discrepancies while retaining high performance; and 3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This three-dimensional blending of functional materials and `living' platforms may enable next-generation 3D printed devices.

Minkowski space structure of the Higgs potential in the two-Higgs-doublet model. II. Minima, symmetries, and topology

International Nuclear Information System (INIS)

Ivanov, I. P.

2008-01-01

We continue to explore the consequences of the recently discovered Minkowski space structure of the Higgs potential in the two-Higgs-doublet model. Here, we focus on the vacuum properties. The search for extrema of the Higgs potential is reformulated in terms of 3-quadrics in the 3+1-dimensional Minkowski space. We prove that 2HDM cannot have more than two local minima in the orbit space and that a twice-degenerate minimum can arise only via spontaneous violation of a discrete symmetry of the Higgs potential. Investigating topology of the 3-quadrics, we give concise criteria for existence of noncontractible paths in the Higgs orbit space. We also study explicit symmetries of the Higgs potential/Lagrangian and their spontaneous violation from a wider perspective than usual

Collider and dark matter searches in the inert doublet model from Peccei-Quinn symmetry

Energy Technology Data Exchange (ETDEWEB)

Alves, Alexandre [Departamento de Ciências Exatas e da Terra, Universidade Federal de São Paulo,Diadema-SP, 09972-270 (Brazil); Camargo, Daniel A.; Dias, Alex G. [Universidade Federal do ABC, Centro de Ciências Naturais e Humanas,09210-580, Santo André-SP (Brazil); Longas, Robinson [Instituto de Física, Universidad de Antioquia,Calle 70 No. 52-21, Medellín (Colombia); Nishi, Celso C. [Universidade Federal do ABC, Centro de Matemática, Computação e Cognição Naturais,09210-580, Santo André-SP (Brazil); Queiroz, Farinaldo S. [Max-Planck-Institut fur Kernphysik,Saupfercheckweg 1, 69117 Heidelberg (Germany)

2016-10-04

Weakly Interacting Massive Particles (WIMPs) and axions are arguably the most compelling dark matter candidates in the literature. Could they coexist as dark matter particles? More importantly, can they be incorporated in a well motivated framework in agreement with experimental data? In this work, we show that this two component dark matter can be realized in the Inert Doublet Model in an elegant and natural manner by virtue of the spontaneous breaking of a Peccei-Quinn U(1){sub PQ} symmetry into a residual ℤ{sub 2} symmetry. The WIMP stability is guaranteed by the ℤ{sub 2} symmetry and a new dark matter component, the axion, arises. There are two interesting outcomes: (i) vector-like quarks needed to implement the Peccei-Quinn symmetry in the model may act as a portal between the dark sector and the SM fields with a supersymmetry-type phenomenology at colliders; (ii) two-component Inert Doublet Model re-opens the phenomenologically interesting 100–500 GeV mass region. We show that the model can successfully realize a two component dark matter framework and at the same time avoid low and high energy physics constraints such as monojet and dijet plus missing energy, as well as indirect and direct dark matter detection bounds.

The top right coupling in the aligned two-Higgs-doublet model

Energy Technology Data Exchange (ETDEWEB)

Ayala, Cesar [Departament de Física Teòrica, Universitat de València & Instituto de Física Corpuscular (IFIC),Centro Mixto Universitat de València-CSIC,E-46100 Burjassot, València (Spain); Department of Physics, Universidad Técnica Federico Santa María,Casilla 110-V, Valparaíso (Chile); González-Sprinberg, Gabriel A. [Instituto de Física, Facultad de Ciencias, Universidad de la República,Iguá 4225, Montevideo 11600 (Uruguay); Martinez, R. [Departamento de Física, Universidad Nacional de Colombia,Bogotá Distrito Capital (Colombia); Vidal, Jordi [Departament de Física Teòrica, Universitat de València & Instituto de Física Corpuscular (IFIC),Centro Mixto Universitat de València-CSIC,E-46100 Burjassot, València (Spain)

2017-03-24

We compute the top quark right coupling in the aligned two-Higgs-doublet model. In the Standard Model the real part of this coupling is dominated by QCD-gluon-exchange diagram, but the imaginary part, instead, is purely electroweak at one loop. Within this model we show that values for the imaginary part of the coupling up to one order of magnitude larger than the electroweak prediction can be obtained. For the real part of the electroweak contribution we find that it can be of the order of 2×10{sup −4}. We also present detailed results of the one loop analytical computation.

Organic bistable memory devices based on MoO3 nanoparticle embedded Alq3 structures

Science.gov (United States)

Abhijith, T.; Kumar, T. V. Arun; Reddy, V. S.

2017-03-01

Organic bistable memory devices were fabricated by embedding a thin layer of molybdenum trioxide (MoO3) between two tris-(8-hydroxyquinoline)aluminum (Alq3) layers. The device exhibited excellent switching characteristics with an ON/OFF current ratio of 1.15 × 103 at a read voltage of 1 V. The device showed repeatable write-erase capability and good stability in both the conductance states. These conductance states are non-volatile in nature and can be obtained by applying appropriate voltage pulses. The effect of MoO3 layer thickness and its location in the Alq3 matrix on characteristics of the memory device was investigated. The field emission scanning electron microscopy (FE-SEM) images of the MoO3 layer revealed the presence of isolated nanoparticles. Based on the experimental results, a mechanism has been proposed for explaining the conductance switching of fabricated devices.

tbW anomalous couplings in the Two Higgs Doublet Model

Energy Technology Data Exchange (ETDEWEB)

Arhrib, Abdesslam; Jueid, Adil [Département de Mathématiques, Faculté des Sciences et Techniques,Université Abdelmalek Essaadi,B. 416, Tangier (Morocco)

2016-08-11

We make a complete one loop calculation of the tbW couplings in the Two Higgs Doublet Model. We evaluate both the anomalous couplings g{sub L} and g{sub R} as well as left handed and right handed component of tbW. The computation is done in the Feynman gauge using the on-shell scheme renormalization for the Standard Model wave functions and parameters. We first show that the relative corrections to these anomalous couplings are rather small in most regions of the parameter space. We then analyze the effects of these anomalous couplings on certain observables such as top quark polarization in single top production through t−channel as well as W{sup ±} boson helicity fractions in top decay.

A model with isospin doublet U(1)D gauge symmetry

Science.gov (United States)

Nomura, Takaaki; Okada, Hiroshi

2018-05-01

We propose a model with an extra isospin doublet U(1)D gauge symmetry, in which we introduce several extra fermions with odd parity under a discrete Z2 symmetry in order to cancel the gauge anomalies out. A remarkable issue is that we impose nonzero U(1)D charge to the Standard Model Higgs, and it gives the most stringent constraint to the vacuum expectation value of a scalar field breaking the U(1)D symmetry that is severer than the LEP bound. We then explore relic density of a Majorana dark matter candidate without conflict of constraints from lepton flavor violating processes. A global analysis is carried out to search for parameters which can accommodate with the observed data.

Measuring the separation of the sodium D-doublet with a Michelson interferometer

Science.gov (United States)

D'Anna, M.; Corridoni, T.

2018-01-01

Revisiting a method proposed by Fizeau in 1862, in this paper we measure the separation of the Na-doublet (the wavelength difference {{Δ }}λ between the two emission D-lines of the sodium spectrum) with a didactical Michelson interferometer. We describe the setup, how the measurements have been done and develop a mathematical model in order to explain the principal features of the collected data. Discussing the limits of this model, we suggest further experimental and theoretical extensions of the experience, also focusing on the didactical aspects to show how this experiment could bring advanced modern physics topics into high schools.

Pb(Zn1/3Nb2/3O3–PbTiO3 single crystal and device development

Directory of Open Access Journals (Sweden)

L. C. Lim

2014-01-01

Full Text Available This paper describes recent device developments with relaxor ferroelectric Pb(Zn1/3Nb2/3O3–PbTiO3 (PZN–PT single crystals carried out at Microfine Materials Technologies Pte. Ltd, Singapore. Promising [011]-poled transverse cuts of PZN–PT single crystals and the results on the effect of electric field and axial compressive stress on the rhombohedral-to-orthorhombic (R–O phase transformation behavior of such cuts are presented and discussed. The single crystal devices described include a compact low-frequency broadband power-efficient underwater tonpilz projector, high sensitivity shear accelerometers and acoustic vector sensors (AVS. The unique characteristics offered by these PZN–PT single crystal devices are highlighted, which serve as examples of new-generation piezoelectric devices and systems for a wide range of demanding applications.

Dark Matter candidate in Inert Doublet Model with additional local gauge symmetry U (1)

International Nuclear Information System (INIS)

Gaitán, R.; De Oca, J.H. Montes; Garcés, E. A.; Cabral-Rosetti, L. G.

2016-01-01

We consider the Inert Doublet Model (IDM) with an additional local gauge symmetry U (1) and a complex singlet scalar to break the symmetry U (1). The continuous symmetry U (1) is introduced to control the CP-conserving interaction instead of some discrete symmetries as usually. We present the mass spectrum for neutral scalar and gauge bosons and the values of the charges under U (1) for which the model could have a candidate to dark matter. (paper)

A tale of twin Higgs: natural twin two Higgs doublet models

International Nuclear Information System (INIS)

Yu, Jiang-Hao

2016-01-01

In original twin Higgs model, vacuum misalignment between electroweak and new physics scales is realized by adding explicit ℤ 2 breaking term. Introducing additional twin Higgs could accommodate spontaneous ℤ 2 breaking, which explains origin of this misalignment. We introduce a class of twin two Higgs doublet models with most general scalar potential, and discuss general conditions which trigger electroweak and ℤ 2 symmetry breaking. Various scenarios on realising the vacuum misalignment are systematically discussed in a natural composite two Higgs double model framework: explicit ℤ 2 breaking, radiative ℤ 2 breaking, tadpole-induced ℤ 2 breaking, and quartic-induced ℤ 2 breaking. We investigate the Higgs mass spectra and Higgs phenomenology in these scenarios.

One-loop contributions to neutral minima in the inert doublet model

Energy Technology Data Exchange (ETDEWEB)

Ferreira, P.M. [Instituto Superior de Engenharia de Lisboa - ISEL,1959-007 Lisboa (Portugal); Centro de Física Teórica e Computacional - FCUL,Universidade de Lisboa, R. Ernesto de Vasconcelos, 1749-016 Lisboa (Portugal); Świeżewska, Bogumiła [Faculty of Physics, University of Warsaw,Pasteura 5, 02-093 Warsaw (Poland)

2016-04-15

The vacuum structure of the inert doublet model is analysed at the one-loop level using the effective potential formalism, to verify the validity of tree-level predictions for the properties of the global minimum. An inert minimum (with massive fermions) and an inert-like minimum (with massless fermions) can coexist at tree level. But the one-loop analysis reveals that the allowed parameter space for the coexistence of more than one minimum is larger than the tree-level expected one. It is also shown that for some choices of parameters, the global minimum found at the one-loop level may be inert (or inert-like), contrary to what the tree-level analysis indicates.

Neutrino masses in RPV models with two pairs of Higgs doublets

Energy Technology Data Exchange (ETDEWEB)

Grossman, Yuval [Laboratory for Elementary-Particle Physics, Cornell University,Ithaca, N.Y. (United States); Peset, Clara [Institut de Fisica d’Altes Energies (IFAE), Universitat Autònoma de Barcelona,08193 Bellaterra, Barcelona (Spain)

2014-04-07

We study the generation of neutrino masses and mixing in supersymmetric R-parity violating models containing two pairs of Higgs doublets. In these models, new RPV terms H^{sub D{sub 1}}H^{sub D{sub 2}}E^ arise in the superpotential, as well as new soft terms. Such terms give new contributions to neutrino masses. We identify the different parameters and suppression/enhancement factors that control each of these contributions. At tree level, just like in the MSSM, only one neutrino acquires a mass due to neutrino-neutralino mixing. There are no new one loop effects. We study the two loop contributions and find the conditions under which they can be important.

Renormalization schemes for the Two-Higgs-Doublet Model and applications to h → WW/ZZ → 4 fermions

DEFF Research Database (Denmark)

Altenkamp, Lukas; Dittmaier, Stefan; Rzehak, Heidi

2017-01-01

We perform the renormalization of different types of Two-Higgs-Doublet Models for the calculation of observables at next-to-leading order. In detail, we suggest four different renormalization schemes based on on-shell renormalization conditions as far as possible and on M S ¯ prescriptions for th...

Search for Higgs bosons predicted in two-Higgs-doublet models via decays to tau lepton pairs in 1.96 TeV pp collisions.

Science.gov (United States)

Aaltonen, T; Adelman, J; Akimoto, T; Alvarez González, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Apresyan, A; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Barria, P; Bartos, P; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Beecher, D; Behari, S; Bellettini, G; Bellinger, J; Benjamin, D; Beretvas, A; Beringer, J; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Bridgeman, A; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burke, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Calancha, C; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carls, B; Carlsmith, D; Carosi, R; Carrillo, S; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavaliere, V; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Chwalek, T; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Compostella, G; Convery, M E; Conway, J; Cordelli, M; Cortiana, G; Cox, C A; Cox, D J; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; Dagenhart, D; Datta, M; Davies, T; de Barbaro, P; De Cecco, S; Deisher, A; De Lorenzo, G; Dell'Orso, M; Deluca, C; Demortier, L; Deng, J; Deninno, M; Derwent, P F; Di Canto, A; di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Elagin, A; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Ferrazza, C; Field, R; Flanagan, G; Forrest, R; Frank, M J; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garberson, F; Garcia, J E; Garfinkel, A F; Garosi, P; Genser, K; Gerberich, H; Gerdes, D; Gessler, A; Giagu, S; Giakoumopoulou, V; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C M; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Group, R C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Han, B-Y; Han, J Y; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hays, C; Heck, M; Heijboer, A; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hewamanage, S; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Hussein, M; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; James, E; Jang, D; Jayatilaka, B; Jeon, E J; Jha, M K; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Kar, D; Karchin, P E; Kato, Y; Kephart, R; Ketchum, W; Keung, J; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, H W; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kreps, M; Kroll, J; Krop, D; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhr, T; Kulkarni, N P; Kurata, M; Kwang, S; Laasanen, A T; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, E; Lee, H S; Lee, S W; Leone, S; Lewis, J D; Lin, C-S; Linacre, J; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, C; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lovas, L; Lucchesi, D; Luci, C; Lueck, J; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; MacQueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis-Katsikakis, A; Margaroli, F; Marino, C; Marino, C P; Martin, A; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Mathis, M; Mattson, M E; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzione, A; Merkel, P; Mesropian, C; Miao, T; Miladinovic, N; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyake, H; Moggi, N; Mondragon, M N; Moon, C S; Moore, R; Morello, M J; Morlock, J; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagai, Y; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Nett, J; Neu, C; Neubauer, M S; Neubauer, S; Nielsen, J; Nodulman, L; Norman, M; Norniella, O; Nurse, E; Oakes, L; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Orava, R; Osterberg, K; Pagan Griso, S; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Peiffer, T; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Pianori, E; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Pueschel, E; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Renton, P; Renz, M; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rodriguez, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Rutherford, B; Saarikko, H; Safonov, A; Sakumoto, W K; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savoy-Navarro, A; Schlabach, P; Schmidt, A; Schmidt, E E; Schmidt, M A; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sforza, F; Sfyrla, A; Shalhout, S Z; Shears, T; Shepard, P F; Shimojima, M; Shiraishi, S; Shochet, M; Shon, Y; Shreyber, I; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soha, A; Somalwar, S; Sorin, V; Spreitzer, T; Squillacioti, P; Stanitzki, M; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Strycker, G L; Suh, J S; Sukhanov, A; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thompson, G A; Thomson, E; Tipton, P; Ttito-Guzmán, P; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Totaro, P; Tourneur, S; Trovato, M; Tsai, S-Y; Tu, Y; Turini, N; Ukegawa, F; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vázquez, F; Velev, G; Vellidis, C; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Volobouev, I; Volpi, G; Wagner, P; Wagner, R G; Wagner, R L; Wagner, W; Wagner-Kuhr, J; Wakisaka, T; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Weinelt, J; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Wilbur, S; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Würthwein, F; Xie, S; Yagil, A; Yamamoto, K; Yamaoka, J; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yi, K; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zhang, X; Zheng, Y; Zucchelli, S

2009-11-13

We present the results of a search for Higgs bosons predicted in two-Higgs-doublet models, in the case where the Higgs bosons decay to tau lepton pairs, using 1.8 fb(-1) of integrated luminosity of pp collisions recorded by the CDF II experiment at the Fermilab Tevatron. Studying the mass distribution in events where one or both tau leptons decay leptonically, no evidence for a Higgs boson signal is observed. The result is used to infer exclusion limits in the two-dimensional space of tanbeta versus m(A) (the ratio of the vacuum expectation values of the two Higgs doublets and the mass of the pseudoscalar boson, respectively).

A search for neutral Higgs bosons in the MSSM and models with two scalar field doublets

CERN Document Server

Ackerstaff, K.; Allison, John; Altekamp, N.; Anderson, K.J.; Anderson, S.; Arcelli, S.; Asai, S.; Ashby, S.F.; Axen, D.; Azuelos, G.; Ball, A.H.; Barberio, E.; Barlow, Roger J.; Bartoldus, R.; Batley, J.R.; Baumann, S.; Bechtluft, J.; Behnke, T.; Bell, Kenneth Watson; Bella, G.; Bentvelsen, S.; Bethke, S.; Betts, S.; Biebel, O.; Biguzzi, A.; Bird, S.D.; Blobel, V.; Bloodworth, I.J.; Bobinski, M.; Bock, P.; Bonacorsi, D.; Boutemeur, M.; Braibant, S.; Brigliadori, L.; Brown, Robert M.; Burckhart, H.J.; Burgard, C.; Burgin, R.; Capiluppi, P.; Carnegie, R.K.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Chrisman, D.; Clarke, P.E.L.; Cohen, I.; Conboy, J.E.; Cooke, O.C.; Couyoumtzelis, C.; Coxe, R.L.; Cuffiani, M.; Dado, S.; Dallapiccola, C.; Dallavalle, G.Marco; Davis, R.; De Jong, S.; del Pozo, L.A.; de Roeck, A.; Desch, K.; Dienes, B.; Dixit, M.S.; Doucet, M.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Eatough, D.; Estabrooks, P.G.; Etzion, E.; Evans, H.G.; Evans, M.; Fabbri, F.; Fanfani, A.; Fanti, M.; Faust, A.A.; Feld, L.; Fiedler, F.; Fierro, M.; Fischer, H.M.; Fleck, I.; Folman, R.; Fong, D.G.; Foucher, M.; Furtjes, A.; Futyan, D.I.; Gagnon, P.; Gary, J.W.; Gascon, J.; Gascon-Shotkin, S.M.; Geddes, N.I.; Geich-Gimbel, C.; Geralis, T.; Giacomelli, G.; Giacomelli, P.; Giacomelli, R.; Gibson, V.; Gibson, W.R.; Gingrich, D.M.; Glenzinski, D.; Goldberg, J.; Goodrick, M.J.; Gorn, W.; Grandi, C.; Gross, E.; Grunhaus, J.; Gruwe, M.; Hajdu, C.; Hanson, G.G.; Hansroul, M.; Hapke, M.; Hargrove, C.K.; Hart, P.A.; Hartmann, C.; Hauschild, M.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Herndon, M.; Herten, G.; Heuer, R.D.; Hildreth, M.D.; Hill, J.C.; Hillier, S.J.; Hobson, P.R.; Hocker, James Andrew; Homer, R.J.; Honma, A.K.; Horvath, D.; Hossain, K.R.; Howard, R.; Huntemeyer, P.; Hutchcroft, D.E.; Igo-Kemenes, P.; Imrie, D.C.; Ishii, K.; Jawahery, A.; Jeffreys, P.W.; Jeremie, H.; Jimack, M.; Joly, A.; Jones, C.R.; Jones, M.; Jost, U.; Jovanovic, P.; Junk, T.R.; Kanzaki, J.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Kayal, P.I.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Kirk, J.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Koetke, D.S.; Kokott, T.P.; Kolrep, M.; Komamiya, S.; Kowalewski, Robert V.; Kress, T.; Krieger, P.; von Krogh, J.; Kyberd, P.; Lafferty, G.D.; Lahmann, R.; Lai, W.P.; Lanske, D.; Lauber, J.; Lautenschlager, S.R.; Lawson, I.; Layter, J.G.; Lazic, D.; Lee, A.M.; Lefebvre, E.; Lellouch, D.; Letts, J.; Levinson, L.; List, B.; Lloyd, S.L.; Loebinger, F.K.; Long, G.D.; Losty, M.J.; Ludwig, J.; Lui, D.; Macchiolo, A.; Macpherson, A.; Mannelli, M.; Marcellini, S.; Markopoulos, C.; Markus, C.; Martin, A.J.; Martin, J.P.; Martinez, G.; Mashimo, T.; Mattig, Peter; McDonald, W.John; McKenna, J.; Mckigney, E.A.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Menke, S.; Merritt, F.S.; Mes, H.; Meyer, J.; Michelini, A.; Mihara, S.; Mikenberg, G.; Miller, D.J.; Mincer, A.; Mir, R.; Mohr, W.; Montanari, A.; Mori, T.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nellen, B.; Nisius, R.; O'Neale, S.W.; Oakham, F.G.; Odorici, F.; Ogren, H.O.; Oh, A.; Oldershaw, N.J.; Oreglia, M.J.; Orito, S.; Palinkas, J.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Patt, J.; Perez-Ochoa, R.; Petzold, S.; Pfeifenschneider, P.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poffenberger, P.; Poli, B.; Posthaus, A.; Rembser, C.; Robertson, S.; Robins, S.A.; Rodning, N.; Roney, J.M.; Rooke, A.; Rossi, A.M.; Routenburg, P.; Rozen, Y.; Runge, K.; Runolfsson, O.; Ruppel, U.; Rust, D.R.; Sachs, K.; Saeki, T.; Sahr, O.; Sang, W.M.; Sarkisian, E.K.G.; Sbarra, C.; Schaile, A.D.; Schaile, O.; Scharf, F.; Scharff-Hansen, P.; Schieck, J.; Schleper, P.; Schmitt, B.; Schmitt, S.; Schoning, A.; Schroder, Matthias; Schumacher, M.; Schwick, C.; Scott, W.G.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.P.; Sittler, A.; Skillman, A.; Skuja, A.; Smith, A.M.; Snow, G.A.; Sobie, R.; Soldner-Rembold, S.; Springer, Robert Wayne; Sproston, M.; Stephens, K.; Steuerer, J.; Stockhausen, B.; Stoll, K.; Strom, David M.; Strohmer, R.; Szymanski, P.; Tafirout, R.; Talbot, S.D.; Taras, P.; Tarem, S.; Teuscher, R.; Thiergen, M.; Thomson, M.A.; von Torne, E.; Torrence, E.; Towers, S.; Trigger, I.; Trocsanyi, Z.; Tsur, E.; Turcot, A.S.; Turner-Watson, M.F.; Ueda, I.; Utzat, P.; Van Kooten, Rick J.; Vannerem, P.; Verzocchi, M.; Vikas, P.; Vokurka, E.H.; Voss, H.; Wackerle, F.; Wagner, A.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wermes, N.; White, J.S.; Wilson, G.W.; Wilson, J.A.; Wyatt, T.R.; Yamashita, S.; Yekutieli, G.; Zacek, V.; Zer-Zion, D.

1998-01-01

A search is described for the neutral Higgs bosons h^0 and A^0 predicted by models with two scalar field doublets and, in particular, the Minimal Supersymmetric Standard Model (MSSM). The search in the Z^0 h^0 and h^0 A^0 production channels is based on data corresponding to an integrated luminosity of 25 pb^{-1} from e^+e^- collisions at centre-of-mass energies between 130 and 172GeV collected with the OPAL detector at LEP. The observation of a number of candidates consistent with Standard Model background expectations is used in combination with earlier results from data collected at the Z^0 resonance to set limits on m_h and m_A in general models with two scalar field doublets and in the MSSM. For example, in the MSSM, for tan(beta) > 1, minimal and maximal scalar top quark mixing and soft SUSY-breaking masses of 1 TeV, the 95% confidence level limits m_h > 59.0 GeV and m_A > 59.5 GeV are obtained. For the first time, the MSSM parameter space is explored in a detailed scan.

A microfluidic device for 2D to 3D and 3D to 3D cell navigation

International Nuclear Information System (INIS)

Shamloo, Amir; Amirifar, Leyla

2016-01-01

Microfluidic devices have received wide attention and shown great potential in the field of tissue engineering and regenerative medicine. Investigating cell response to various stimulations is much more accurate and comprehensive with the aid of microfluidic devices. In this study, we introduced a microfluidic device by which the matrix density as a mechanical property and the concentration profile of a biochemical factor as a chemical property could be altered. Our microfluidic device has a cell tank and a cell culture chamber to mimic both 2D to 3D and 3D to 3D migration of three types of cells. Fluid shear stress is negligible on the cells and a stable concentration gradient can be obtained by diffusion. The device was designed by a numerical simulation so that the uniformity of the concentration gradients throughout the cell culture chamber was obtained. Adult neural cells were cultured within this device and they showed different branching and axonal navigation phenotypes within varying nerve growth factor (NGF) concentration profiles. Neural stem cells were also cultured within varying collagen matrix densities while exposed to NGF concentrations and they experienced 3D to 3D collective migration. By generating vascular endothelial growth factor concentration gradients, adult human dermal microvascular endothelial cells also migrated in a 2D to 3D manner and formed a stable lumen within a specific collagen matrix density. It was observed that a minimum absolute concentration and concentration gradient were required to stimulate migration of all types of the cells. This device has the advantage of changing multiple parameters simultaneously and is expected to have wide applicability in cell studies. (paper)

Outgassing measurements and results used in designing the Doublet III Neutral Beam Injector System

International Nuclear Information System (INIS)

Yamamoto, R.M.; Harvey, J.

1979-11-01

Material vacuum properties played an important part in designing the Neutral Beam Injector System for General Atomic's Doublet III Tokamak. Low operating vacuum tank pressures were desired to keep re-ionization of the Neutral Beam to a minimum. Plasma contamination was also a major concern, hence stringent material impurity constraints were imposed. Outgassing Rate Measurement and Residual Gas Analyses were performed on different types of materials to determine if their vacuum properties were compatible with the Neutral Beam Injector System requirements

Optimization Techniques for 3D Graphics Deployment on Mobile Devices

Science.gov (United States)

Koskela, Timo; Vatjus-Anttila, Jarkko

2015-03-01

3D Internet technologies are becoming essential enablers in many application areas including games, education, collaboration, navigation and social networking. The use of 3D Internet applications with mobile devices provides location-independent access and richer use context, but also performance issues. Therefore, one of the important challenges facing 3D Internet applications is the deployment of 3D graphics on mobile devices. In this article, we present an extensive survey on optimization techniques for 3D graphics deployment on mobile devices and qualitatively analyze the applicability of each technique from the standpoints of visual quality, performance and energy consumption. The analysis focuses on optimization techniques related to data-driven 3D graphics deployment, because it supports off-line use, multi-user interaction, user-created 3D graphics and creation of arbitrary 3D graphics. The outcome of the analysis facilitates the development and deployment of 3D Internet applications on mobile devices and provides guidelines for future research.

Higgs particle production at LEP in multi-doublet scenarios with hierarchy of the vacuum expectation values

International Nuclear Information System (INIS)

Kalinowski, J.; Pokorski, S.

1989-01-01

We discuss the production at LEP of Higgs particles in multi-doublet scenarios with a hierarchy of the vacuum expectation values ν 2 /ν 1 ≅m t /m b . The cross sections are similar or larger than for the standard Higgs boson of the same mass but the signature is different. Events with four b-jets are the only important signature of such Higgs particles. (orig.)

Effects of CuBr addition to CH3NH3PbI3(Cl) perovskite photovoltaic devices

Science.gov (United States)

Oku, Takeo; Ohishi, Yuya; Tanaka, Hiroki

2018-01-01

Effects of CuBr addition to perovskite CH3NH3PbI3(Cl) precursor solutions on photovoltaic properties were investigated. The CH3NH3Pb(Cu)I3(Cl,Br)-based photovoltaic devices were fabricated by a spin-coating technique, and the microstructures of the devices were investigated by X-ray diffraction, optical microscopy and scanning electron microscopy. Current density-voltage characteristics were improved by a small amount of CuBr addition, which resulted in improvement of the conversion efficiencies of the devices. The structure analysis showed decrease of unit cell volume and increase of Cu/Br composition by the CuBr addition, which would indicate the Cu/Br substitution at the Pb/I sites in the perovskite crystal, respectively.

Selected topics on surface effects in fusion devices: neutral-beam injectors and beam-direct converters

International Nuclear Information System (INIS)

Kaminsky, M.

1978-01-01

Neutral-beam injectors are being used for the heating and fueling of plasmas in existing devices such as PLT (Princeton), ISX (Oak Ridge) and 2XIIB (Lawrence Livermore Laboratory) and will be used in devices such as TFTR (Princeton), MX (Livermore) and Doublet III (Gulf Atomic). For example, TFTR has been designed to receive a total of 20 MW of 120-keV deuterium atoms in pulses of 0.5-sec duration from 12 neutral beam injectors; for the MX experiment it is planned to inject a total of 750A (equivalent) of deuterium atoms with a mean energy of 56 keV in 0.5-sec pulses. The interaction of energetic deuterium atoms with exposed surfaces of device components such as beam dumps, beam-direct-convertors collectors, beam calorimeters, and armor plates, cause a variety of surface effects which affect deleteriously the operation of such devices. Some of the major effects will be discussed

A tale of twin Higgs: natural twin two Higgs doublet models

Energy Technology Data Exchange (ETDEWEB)

Yu, Jiang-Hao [Amherst Center for Fundamental Interactions, Department of Physics,University of Massachusetts Amherst,710 North Pleasant St., Amherst, MA 01002 (United States)

2016-12-28

In original twin Higgs model, vacuum misalignment between electroweak and new physics scales is realized by adding explicit ℤ{sub 2} breaking term. Introducing additional twin Higgs could accommodate spontaneous ℤ{sub 2} breaking, which explains origin of this misalignment. We introduce a class of twin two Higgs doublet models with most general scalar potential, and discuss general conditions which trigger electroweak and ℤ{sub 2} symmetry breaking. Various scenarios on realising the vacuum misalignment are systematically discussed in a natural composite two Higgs double model framework: explicit ℤ{sub 2} breaking, radiative ℤ{sub 2} breaking, tadpole-induced ℤ{sub 2} breaking, and quartic-induced ℤ{sub 2} breaking. We investigate the Higgs mass spectra and Higgs phenomenology in these scenarios.

3D TCAD Simulation for Semiconductor Processes, Devices and Optoelectronics

CERN Document Server

Li, Simon

2012-01-01

Technology computer-aided design, or TCAD, is critical to today’s semiconductor technology and anybody working in this industry needs to know something about TCAD.  This book is about how to use computer software to manufacture and test virtually semiconductor devices in 3D.  It brings to life the topic of semiconductor device physics, with a hands-on, tutorial approach that de-emphasizes abstract physics and equations and emphasizes real practice and extensive illustrations.  Coverage includes a comprehensive library of devices, representing the state of the art technology, such as SuperJunction LDMOS, GaN LED devices, etc. Provides a vivid, internal view of semiconductor devices, through 3D TCAD simulation; Includes comprehensive coverage of  TCAD simulations for both optic and electronic devices, from nano-scale to high-voltage high-power devices; Presents material in a hands-on, tutorial fashion so that industry practitioners will find maximum utility; Includes a comprehensive library of devices, re...

Diamond Pixel Detectors and 3D Diamond Devices

International Nuclear Information System (INIS)

Venturi, N.

2016-01-01

Results from detectors of poly-crystalline chemical vapour deposited (pCVD) diamond are presented. These include the first analysis of data of the ATLAS Diamond Beam Monitor (DBM). The DBM module consists of pCVD diamond sensors instrumented with pixellated FE-I4 front-end electronics. Six diamond telescopes, each with three modules, are placed symmetrically around the ATLAS interaction point. The DBM tracking capabilities allow it to discriminate between particles coming from the interaction point and background particles passing through the ATLAS detector. Also, analysis of test beam data of pCVD DBM modules are presented. A new low threshold tuning algorithm based on noise occupancy was developed which increases the DBM module signal to noise ratio significantly. Finally first results from prototypes of a novel detector using pCVD diamond and resistive electrodes in the bulk, forming a 3D diamond device, are discussed. 3D devices based on pCVD diamond were successfully tested with test beams at CERN. The measured charge is compared to that of a strip detector mounted on the same pCVD diamond showing that the 3D device collects significantly more charge than the planar device.

Baryogenesis in the two doublet and inert singlet extension of the Standard Model

DEFF Research Database (Denmark)

Alanne, Tommi; Kainulainen, Kimmo; Tuominen, Kimmo

2016-01-01

We investigate an extension of the Standard Model containing two Higgs doublets and a singlet scalar field (2HDSM). We show that the model can have a strongly first-order phase transition and give rise to the observed baryon asymmetry of the Universe, consistent with all experimental constraints...... with the critical temperature, Tn Tc, which can significantly alter the usual phase-transition pattern in 2HD models with Tn ≈ Tc. Furthermore, the singlet field can be the dark matter particle. However, in models with a strong first-order transition its abundance is typically but a thousandth of the observed dark...... matter abundance....

The strange quark contribution to the neutron electric dipole moment in multi-Higgs doublet models

International Nuclear Information System (INIS)

He, Xiao Gang; McKeller, H.J.; Pakvasa, S.

1990-09-01

The strange quark contribution to the neutron electric dipole moment was studied and compared with other contributions in multi-Higgs doublet models. It was found that the strange quark contribution is significant because the strange quark color dipole moment is larger than that of the down (up) quark by a factor m s /m d (m s /m u ). In the case of neutral Higgs it can be the dominant contribution to the neutron electric dipole moment. 18 refs

Constraining Proton Lifetime in SO(10) with Stabilized Doublet-Triplet Splitting

Energy Technology Data Exchange (ETDEWEB)

Babu, K.S.; /Oklahoma State U.; Pati, Jogesh C.; /SLAC; Tavartkiladze, Zurab; /Oklahoma State U. /Tbilisi, Inst. Phys.

2011-06-28

We present a class of realistic unified models based on supersymmetric SO(10) wherein issues related to natural doublet-triplet (DT) splitting are fully resolved. Using a minimal set of low dimensional Higgs fields which includes a single adjoint, we show that the Dimopoulos-Wilzcek mechanism for DT splitting can be made stable in the presence of all higher order operators without having pseudo-Goldstone bosons and flat directions. The {mu} term of order TeV is found to be naturally induced. A Z{sub 2}-assisted anomalous U(1){sub A} gauge symmetry plays a crucial role in achieving these results. The threshold corrections to {alpha}{sub 3}(M{sub Z}), somewhat surprisingly, are found to be controlled by only a few effective parameters. This leads to a very predictive scenario for proton decay. As a novel feature, we find an interesting correlation between the d = 6 (p {yields} e{sup +}{pi}{sup 0}) and d = 5 (p {yields} {bar {nu}}K{sup +}) decay amplitudes which allows us to derive a constrained upper limit on the inverse rate of the e{sup +}{pi}{sup 0} mode. Our results show that both modes should be observed with an improvement in the current sensitivity by about a factor of five to ten.

SM with two Higgs doublets: an example of CP-violation without Fermions

International Nuclear Information System (INIS)

Cvetic, G.

1993-01-01

Some CP-violation effects without fermions in the Standard Model are investigated with two Higgs doublets. First, the mass eigenstates of the physical neutral Higgses are calculated for small but nonzero CP-violation parameter ξ * , and then a ''forward-backward'' asymmetry A fb for the decay H → W + W - Z that would be a signal of CP-violation. The effects are in general small. However, A fb turns out to be a rather clean signal of CP-violation: neither the CP-conserving final state interactions nor the direct production background events contribute to Γ fb . The KM-type CP-violation effects that could in principle also contribute to A fb are negligible. 6 refs

Comparison of Theodorsen's Unsteady Aerodynamic Forces with Doublet Lattice Generalized Aerodynamic Forces

Science.gov (United States)

Perry, Boyd, III

2017-01-01

This paper identifies the unsteady aerodynamic forces and moments for a typical section contained in the NACA Report No. 496, "General Theory of Aerodynamic Instability and the Mechanism of Flutter," by Theodore Theodorsen. These quantities are named Theodorsen's aerodynamic forces (TAFs). The TAFs are compared to the generalized aerodynamic forces (GAFs) for a very high aspect ratio wing (AR = 20) at zero Mach number computed by the doublet lattice method. Agreement between TAFs and GAFs is very-good-to-excellent. The paper also reveals that simple proportionality relationships that are known to exist between the real parts of some GAFs and the imaginary parts of others also hold for the real and imaginary parts of the corresponding TAFs.

Thermal stress analysis and the effect of temperature dependence of material properties on Doublet III limiter design

International Nuclear Information System (INIS)

McKelvey, T.E.; Koniges, A.E.; Marcus, F.; Sabado, M.; Smith, R.

1979-10-01

Temperature and thermal stress parametric design curves are presented for two materials selected for Doublet III primary limiter applications. INC X-750 is a candidate for the medium Z limiter design and ATJ graphite for the low Z design. The dependence of significant material properties on temperature is shown and the impact of this behavior on the decision to actively or passively cool the limiter is discussed

Controlled flavour changing neutral couplings in two Higgs Doublet models

Energy Technology Data Exchange (ETDEWEB)

Alves, Joao M.; Branco, Gustavo C.; Nebot, Miguel [Instituto Superior Tecnico (IST), Lisboa Univ., Departamento de Fisica e Centro de Fisica Teorica de Particulas (CFTP), Lisboa (Portugal); Botella, Francisco J.; Cornet-Gomez, Fernando [Universitat de Valencia-CSIC, Departament de Fisica Teorica y IFIC, Burjassot (Spain)

2017-09-15

We propose a class of two Higgs doublet models where there are flavour changing neutral currents (FCNC) at tree level, but under control due to the introduction of a discrete symmetry in the full Lagrangian. It is shown that in this class of models, one can have simultaneously FCNC in the up and down sectors, in contrast to the situation encountered in the renormalisable and minimal flavour violating 2HDM models put forward by Branco et al. (Phys Lett B 380:119, 1996). The intensity of FCNC is analysed and it is shown that in this class of models one can respect all the strong constraints from experiment without unnatural fine-tuning. It is pointed out that the additional sources of flavour and CP violation are such that they can enhance significantly the generation of the Baryon asymmetry of the Universe, with respect to the standard model. (orig.)

Two Higgs doublet models and b → s exclusive decays

Energy Technology Data Exchange (ETDEWEB)

Arnan, Pere; Mescia, Federico [Universitat de Barcelona, Departament de Fisica Quantica i Astrofisica (FQA), Institut de Ciencies del Cosmos (ICCUB), Barcelona (Spain); Becirevic, Damir [CNRS, Univ. Paris-Sud, Universite Paris-Saclay, Laboratoire de Physique Theorique, Orsay (France); Sumensari, Olcyr [CNRS, Univ. Paris-Sud, Universite Paris-Saclay, Laboratoire de Physique Theorique, Orsay (France); Universidade de Sao Paulo, Instituto de Fisica, Sao Paulo (Brazil)

2017-11-15

We computed the leading order Wilson coefficients relevant to all the exclusive b → sl{sup +}l{sup -} decays in the framework of the two Higgs doublet model (2HDM) with a softly broken Z{sub 2} symmetry by including the O(m{sub b}) corrections. We elucidate the issue of appropriate matching between the full and the effective theory when dealing with the (pseudo-)scalar operators for which keeping the external momenta different from zero is necessary. We then make a phenomenological analysis by using the measured B(B{sub s} → μ{sup +}μ{sup -}) and B(B → Kμ{sup +}μ{sup -}){sub high-q{sup 2}}, for which the hadronic uncertainties are well controlled, and we discuss their impact on various types of 2HDM. A brief discussion of the decays with τ-leptons in the final state is provided too. (orig.)

Effect of CP violation in the singlet-doublet dark matter model

Directory of Open Access Journals (Sweden)

Tomohiro Abe

2017-08-01

Full Text Available We revisit the singlet-doublet dark matter model with a special emphasis on the effect of CP violation on the dark matter phenomenology. The CP violation in the dark sector induces a pseudoscalar interaction of a fermionic dark matter candidate with the SM Higgs boson. The pseudoscalar interaction helps the dark matter candidate evade the strong constraints from the dark matter direct detection experiments. We show that the model can explain the measured value of the dark matter density even if dark matter direct detection experiments do not observe any signal. We also show that the electron electric dipole moment is an important complement to the direct detection for testing this model. Its value is smaller than the current upper bound but within the reach of future experiments.

Restrictions on two Higgs doublet models and CP violation at the unification scale

International Nuclear Information System (INIS)

Athanasiu, G.G.

1987-01-01

In Part I we examine bounds from CP violation in the neutral K system on charged Higgs masses and couplings in models with two Higgs doublets. While CP violation is still due only to a non-zero phase in the Kobayashi-Maskawa matrix, there are additional short-distance contributions involving charged Higgs exchange rather than W boson exchange. By having CP violation in the mass matrix, but not in the kaon to two pions decay amplitude, largely due to Higgs exchange, it is possible to obtain a small value of ε'/ε. In Part II we obtain bounds on charged-Higgs-boson masses and couplings in two Higgs doublet models from their effects on neutral-B-meson mixing. The bounds are comparable to those obtained with additional assumptions from the neutral-K-system. Neutral-Higgs-boson effects on the spectrum and wave functions of tt bound states are examined in the same model. In the future they could lead to restrictions on, or discovery of, the corresponding neutral Higgs bosons if they have relatively low masses and enhanced couplings. Finally, in Part III, the three generation phase invariant measure of CP violation is shown to satisfy a simple and solvable renormalization group equation. Its value falls by four to eight orders of magnitude between the weak and grand unification scales in the standard model, as well as in its two Higgs and supersymmetric extensions. Such a small value of CP violation at the grand unification scale can pose a problem for baryogenesis; this avoided if there are heavy quarks with masses close to their fixed points

Electrical Stress Influences the Efficiency of CH3 NH3 PbI3 Perovskite Light Emitting Devices.

Science.gov (United States)

Zhao, Lianfeng; Gao, Jia; Lin, YunHui L; Yeh, Yao-Wen; Lee, Kyung Min; Yao, Nan; Loo, Yueh-Lin; Rand, Barry P

2017-06-01

Organic-inorganic hybrid perovskite materials are emerging as semiconductors with potential application in optoelectronic devices. In particular, perovskites are very promising for light-emitting devices (LEDs) due to their high color purity, low nonradiative recombination rates, and tunable bandgap. Here, using pure CH 3 NH 3 PbI 3 perovskite LEDs with an external quantum efficiency (EQE) of 5.9% as a platform, it is shown that electrical stress can influence device performance significantly, increasing the EQE from an initial 5.9% to as high as 7.4%. Consistent with the enhanced device performance, both the steady-state photoluminescence (PL) intensity and the time-resolved PL decay lifetime increase after electrical stress, indicating a reduction in nonradiative recombination in the perovskite film. By investigating the temperature-dependent characteristics of the perovskite LEDs and the cross-sectional elemental depth profile, it is proposed that trap reduction and resulting device-performance enhancement is due to local ionic motion of excess ions, likely excess mobile iodide, in the perovskite film that fills vacancies and reduces interstitial defects. On the other hand, it is found that overstressed LEDs show irreversibly degraded device performance, possibly because ions initially on the perovskite lattice are displaced during extended electrical stress and create defects such as vacancies. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Moessbauer effect measurements on the intermetallic compounds Ni3Al and Ni3Ge

International Nuclear Information System (INIS)

Drijver, J.W.; Woude, F. van der

1975-01-01

Moessbauer parameters obtained from room temperature emission and absorption spectra of Ni 3 Al and Ni 3 Ga processed by a computer assuming a singlet and a doublet are given. The doublet is due to iron or cobalt atoms at the nickel site. Quadrupole splitting at 57 Fe nuclei in Ni 3 Ga is larger than in Ni 3 Al, viz. 0.52 and 0.37 mm/sec, respectively. Isomer shift at the Al/Ga position is very close to -0.02 mm/sec found in metallic nickel. Also given are the hyperfine magnetic fields at 4.2 K. Considering the preference of 57 Co and 57 Fe atoms in the lattice, the field intensities at the nickel and aluminium sites are found to be 227 +- 1 and 238 +- 1 kOe, respectively. (Z.S.)

A 3D printed microfluidic perfusion device for multicellular spheroid cultures.

Science.gov (United States)

Ong, Louis Jun Ye; Islam, Anik; DasGupta, Ramanuj; Iyer, Narayanan Gopalakkrishna; Leo, Hwa Liang; Toh, Yi-Chin

2017-09-11

The advent of 3D printing technologies promises to make microfluidic organ-on-chip technologies more accessible for the biological research community. To date, hydrogel-encapsulated cells have been successfully incorporated into 3D printed microfluidic devices. However, there is currently no 3D printed microfluidic device that can support multicellular spheroid culture, which facilitates extensive cell-cell contacts important for recapitulating many multicellular functional biological structures. Here, we report a first instance of fabricating a 3D printed microfluidic cell culture device capable of directly immobilizing and maintaining the viability and functionality of 3D multicellular spheroids. We evaluated the feasibility of two common 3D printing technologies i.e. stereolithography (SLA) and PolyJet printing, and found that SLA could prototype a device comprising of cell immobilizing micro-structures that were housed within a microfluidic network with higher fidelity. We have also implemented a pump-free perfusion system, relying on gravity-driven flow to perform medium perfusion in order to reduce the complexity and footprint of the device setup, thereby improving its adaptability into a standard biological laboratory. Finally, we demonstrated the biological performance of the 3D printed device by performing pump-free perfusion cultures of patient-derived parental and metastatic oral squamous cell carcinoma tumor and liver cell (HepG2) spheroids with good cell viability and functionality. This paper presents a proof-of-concept in simplifying and integrating the prototyping and operation of a microfluidic spheroid culture device, which will facilitate its applications in various drug efficacy, metabolism and toxicity studies.

Dobletes etimológicos en fraseología / Etymological doublets in phraseology

Directory of Open Access Journals (Sweden)

Oksana Gorelova

2010-07-01

Full Text Available RESUMEN: El artículo analiza un grupo de frases proverbiales españolas que proceden de un mismo étimo latino pero que entraron en la lengua española por dos vías diferentes: la escrita y la hablada, lo que permite llegar a la conclusión de que en el sistema fraseológico español existen dobletes etimológicos.ABSTRACT: The article analyses a group of Spanish proverbial sayings that originate in the same Latin etymon but entered the Spanish language though two two different routes - the written one and the spoken one. This allows us draw conclusions about the existence of etymological doublets in the Spanish phraseological system.

Looking for New Naturally Aligned Higgs Doublets at the LHC

CERN Document Server

Pilaftsis, Apostolos

2015-10-30

Since the current LHC Higgs data suggest the couplings of the observed 125 GeV Higgs boson to be close to the Standard Model (SM) expectations, any extended Higgs sector must lead to the so-called SM alignment limit, where one of the Higgs bosons behaves exactly like that of the SM. In the context of the Two Higgs Doublet Model (2HDM), this alignment is often associated with either decoupling of the heavy Higgs sector or accidental cancellations in the 2HDM potential. We present a novel symmetry justification for 'natural' alignment without necessarily decoupling or fine-tuning. We show that there exist only three different symmetry realizations of the natural alignment scenario in 2HDM. We analyze new collider signals for the heavy Higgs sector in the natural alignment limit, which dominantly lead to third-generation quarks in the final state and can serve as a useful observational tool during the Run-II phase of the LHC.

Engineering Novel Lab Devices Using 3D Printing and Microcontrollers.

Science.gov (United States)

Courtemanche, Jean; King, Samson; Bouck, David

2018-03-01

The application of 3D printing and microcontrollers allows users to rapidly engineer novel hardware solutions useful in a laboratory environment. 3D printing is transformative as it enables the rapid fabrication of adapters, housings, jigs, and small structural elements. Microcontrollers allow for the creation of simple, inexpensive machines that receive input from one or more sensors to trigger a mechanical or electrical output. Bringing these technologies together, we have developed custom solutions that improve capabilities and reduce costs, errors, and human intervention. In this article, we describe three devices: JetLid, TipWaster, and Remote Monitoring Device (REMIND). JetLid employs a microcontroller and presence sensor to trigger a high-speed fan that reliably de-lids microtiter plates on a high-throughput screening system. TipWaster uses a presence sensor to activate an active tip waste chute when tips are ejected from a pipetting head. REMIND is a wireless, networked lab monitoring device. In its current implementation, it monitors the liquid level of waste collection vessels or bulk liquid reagent containers. The modularity of this device makes adaptation to other sensors (temperature, humidity, light/darkness, movement, etc.) relatively simple. These three devices illustrate how 3D printing and microcontrollers have enabled the process of rapidly turning ideas into useful devices.

Review of 3D Printed Millimeter-Wave and Terahertz Passive Devices

Directory of Open Access Journals (Sweden)

Bing Zhang

2017-01-01

Full Text Available The 3D printing technology is catching attention nowadays. It has certain advantages over the traditional fabrication processes. We give a chronical review of the 3D printing technology from the time it was invented. This technology has also been used to fabricate millimeter-wave (mmWave and terahertz (THz passive devices. Though promising results have been demonstrated, the challenge lies in the fabrication tolerance improvement such as dimensional tolerance and surface roughness. We propose the design methodology of high order device to circumvent the dimensional tolerance and suggest specific modelling of the surface roughness of 3D printed devices. It is believed that, with the improvement of the 3D printing technology and related subjects in material science and mechanical engineering, the 3D printing technology will become mainstream for mmWave and THz passive device fabrication.

B→ηK* and B→φKs decays in the two Higgs doublet model III

International Nuclear Information System (INIS)

Wang Shuaiwei; Song Taiping; Lv Linxia

2008-01-01

Using the QCD factorization approach, we investigate the large branching ratios of B→ηK * decays and the S φK s anomaly of B→φK s decay in the two Higgs doublet model III. With the contributions of flavour-changing neutral current mediated by the neutral Higgs bosons H 0 , h 0 and A 0 at the tree level, we provide a coherent resolution to these anomalies within the constrained parameter spaces, which are 120 bs λ ss |<136. This will be really interesting in searching for the signs of new physics. (authors)

Higgs boson pair production at the photon linear collider in the two Higgs doublet model

International Nuclear Information System (INIS)

Asakawa, Eri; Harada, Daisuke; Okada, Yasuhiro; Kanemura, Shinya; Tsumura, Koji

2009-02-01

We calculate the cross section of the lightest Higgs boson pair production at the Photon Linear Collider in the two Higgs doublet model. We focus on the scenario in which the lightest Higgs boson has the standard model like couplings to gauge bosons. We take into account the one-loop correction to the hhh coupling as well as additional one-loop diagrams due to charged bosons to the γγ → hh helicity amplitudes. We discuss the impact of these corrections on the hhh coupling measurement at the Photon Linear Collider. (author)

Magnetic resonance imaging of implantable cardiac rhythm devices at 3.0 tesla.

Science.gov (United States)

Gimbel, J Rod

2008-07-01

A relaxation of the prohibition of scanning cardiac rhythm device patients is underway, largely because of the growing experience of safe scanning events at 1.5T. Magnetic resonance imaging (MRI) at 3T is becoming more common and may pose a different risk profile and outcome of MRI of cardiac device patients. No restrictions were placed on pacemaker dependency, region scanned, device type, or manufacturer. Sixteen scans at 3T were performed with an electrophysiologist present on 14 patients with a variety of devices from various manufacturers. An "MRI-S" strategy was used. Multimodal monitoring was required. Device interrogation was performed prior to, immediately after, and 1-3 months after the MRI. For nonpacemaker-dependent device patients, attempts were made to turn all device features off (with OOO programming the goal) conceptually rendering the device "invisible." In pacemaker-dependent patients, the device was programmed to asynchronous mode at highest output for the duration of the scan with the goal of rendering the device conceptually "invulnerable" to MRI effects. The specific absorption rate (SAR) was limited to 2W/kg. All patients were successfully scanned. No arrhythmias were noted. No significant change in the programmed parameters, pacing thresholds, sensing, impedance, or battery parameters was noted. The insertable loop recorder (ILR) recorded prolonged artifactual asystole during MRI. One patient noted chest burning during the scan. Device patients may undergo carefully tailored 3T MRI scans when pre-MRI reprogramming of the device occurs in conjunction with extensive monitoring, supervision, and follow-up.

Mössbauer spectroscopic study on spin crossover coordination polymer Fe(3-Clpy){sub 2}[Pd(CN){sub 4}

Energy Technology Data Exchange (ETDEWEB)

Kitazawa, Takafumi, E-mail: kitazawa@chem.sci.toho-u.ac.jp; Sekiya, Madoka; Kawasaki, Takeshi; Takahashi, Masashi [Toho University, Department of Chemistry, Faculty of Science (Japan)

2016-12-15

{sup 57}Fe Mössbauer spectroscopic results on the alternatively prepared spin crossover coordination polymer Fe(3-Clpy){sub 2}Pd(CN){sub 4} sample I agree with those of SQUID data. Mössbauer specrum at RT shows two diffrent doublets which correspond to the HS1(inner doublet) and HS2(outer doublet). The intensity of the HS1 doublet decreases on cooling to 78 K at the expense of a new one featuring the LS singlet. Almost 100 % of HS1 change to LS singlet due to iron(II) ions coordinated by four N atoms of cyano groups and two N atoms of 3-Clpy ligand in the sample I. The SQUID data of the sample I prepared by a new direct contact method are different from those of the already reported Fe(3-Clpy){sub 2}Pd(CN){sub 4} sample. The differences of the SQUID data are associated with particle size effects in molecule spin crossover samples.

Critical Assessment of TD-DFT for Excited States of Open-Shell Systems: I. Doublet-Doublet Transitions.

Science.gov (United States)

Li, Zhendong; Liu, Wenjian

2016-01-12

A benchmark set of 11 small radicals is set up to assess the performance of time-dependent density functional theory (TD-DFT) for the excited states of open-shell systems. Both the unrestricted (U-TD-DFT) and spin-adapted (X-TD-DFT) formulations of TD-DFT are considered. For comparison, the well-established EOM-CCSD (equation-of-motion coupled-cluster with singles and doubles) is also used. In total, 111 low-lying singly excited doublet states are accessed by all the three approaches. Taking the MRCISD+Q (multireference configuration interaction with singles and doubles plus the Davidson correction) results as the benchmark, it is found that both U-TD-DFT and EOM-CCSD perform well for those states dominated by singlet-coupled single excitations (SCSE) from closed-shell to open-shell, open-shell to vacant-shell, or closed-shell to vacant-shell orbitals. However, for those states dominated by triplet-coupled single excitations (TCSE) from closed-shell to vacant-shell orbitals, both U-TD-DFT and EOM-CCSD fail miserably due to severe spin contaminations. In contrast, X-TD-DFT provides balanced descriptions of both SCSE and TCSE. As far as the functional dependence is concerned, it is found that, when the Hartree-Fock ground state does not suffer from the instability problem, both global hybrid (GH) and range-separated hybrid (RSH) functionals perform grossly better than pure density functionals, especially for Rydberg and charge-transfer excitations. However, if the Hartree-Fock ground state is instable or nearly instable, GH and RSH tend to underestimate severely the excitation energies. The SAOP (statistically averaging of model orbital potentials) performs more uniformly than any other density functionals, although it generally overestimates the excitation energies of valence excitations. Not surprisingly, both EOM-CCSD and adiabatic TD-DFT are incapable of describing excited states with substantial double excitation characters.

Electric dipole moments of charged leptons in the split fermion scenario in the two Higgs doublet model

International Nuclear Information System (INIS)

Iltan, E.O.

2005-01-01

We predict the charged lepton electric dipole moments in the split fermion scenario in the framework of the two Higgs doublet model. We observe that the numerical value of the muon (tau) electric dipole moment is of the order of the magnitude of 10 -22 e cm (10 -20 e cm) and there is an enhancement in the case of two extra dimensions, especially for the tau lepton electric dipole moment. (orig.)

The Reliability of a Novel Mobile 3-dimensional Wound Measurement Device.

Science.gov (United States)

Anghel, Ersilia L; Kumar, Anagha; Bigham, Thomas E; Maselli, Kathryn M; Steinberg, John S; Evans, Karen K; Kim, Paul J; Attinger, Christopher E

2016-11-01

Objective assessment of wound dimensions is essential for tracking progression and determining treatment effectiveness. A reliability study was designed to establish intrarater and interrater reliability of a novel mobile 3-dimensional wound measurement (3DWM) device. Forty-five wounds were assessed by 2 raters using a 3DWM device to obtain length, width, area, depth, and volume measurements. Wounds were also measured manually, using a disposable ruler and digital planimetry. The intraclass correlation coefficient (ICC) was used to establish intrarater and interrater reliability. High levels of intrarater and interrater agreement were observed for area, length, and width; ICC = 0.998, 0.977, 0.955 and 0.999, 0.997, 0.995, respectively. Moderate levels of intrarater (ICC = 0.888) and interrater (ICC = 0.696) agreement were observed for volume. Lastly, depth yielded an intrarater ICC of 0.360 and an interrater ICC of 0.649. Measures from the 3DWM device were highly correlated with those obtained from scaled photography for length, width, and area (ρ = 0.997, 0.988, 0.997, P device yielded correlations of ρ = 0.990, 0.987, 0.996 with P device was found to be highly reliable for measuring wound areas for a range of wound sizes and types as compared to manual measurement and digital planimetry. The depth and therefore volume measurement using the 3DWM device was found to have a lower ICC, but volume ICC alone was moderate. Overall, this device offers a mobile option for objective wound measurement in the clinical setting.

Generation of doublet spectral lines at self-seeded X-ray FELs

Energy Technology Data Exchange (ETDEWEB)

Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2010-11-15

Self-seeding schemes, consisting of two undulators with a monochromator in between, aim to reduce the bandwidth of SASE X-ray FELs. We recently proposed to use a new method of monochromatization exploiting a single crystal in Braggtransmission geometry for self-seeding in the hard X-ray range. The obvious and technically possible extension is to use such kind of monochromator setup with two -or more- crystals arranged in a series to spectrally filter the SASE radiation at two -or more- closely-spaced wavelengths within the FEL gain band. This allows for the production of doublet- or multiplet-spectral lines. Applications exist over a broad range of hard X-ray wavelengths involving any process where there is a large change in cross section over a narrow wavelength range, as in multiple wavelength anomalous diffraction techniques (MAD). In this paper we consider the simultaneous operation of the LCLS hard X-ray FEL at two closely spaced wavelengths. We present simulation results for the LCLS baseline, and we show that this method can produce fully coherent radiation shared between two longitudinal modes. Mode spacing can be easily tuned within the FEL gain band, i.e. within 10 eV. An interesting aspect of the proposed scheme is a way of modulating the electron bunch at optical frequencies without a seed quantum laser. In fact, the XFEL output intensity contains an oscillating ''mode-beat'' component whose frequency is related to the frequency difference between the pair of longitudinal modes considered. Thus, at saturation one obtains FEL-induced modulations of energy loss and energy spread in the electron bunch at optical frequency. These modulations can be converted into density modulation at the same optical frequency with the help of a weak chicane installed behind the baseline undulator. Powerful coherent radiation can then be generated with the help of an optical transition radiation (OTR) station,which have important applications. In this paper we briefly

Generation of doublet spectral lines at self-seeded X-ray FELs

International Nuclear Information System (INIS)

Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

2010-11-01

Self-seeding schemes, consisting of two undulators with a monochromator in between, aim to reduce the bandwidth of SASE X-ray FELs. We recently proposed to use a new method of monochromatization exploiting a single crystal in Braggtransmission geometry for self-seeding in the hard X-ray range. The obvious and technically possible extension is to use such kind of monochromator setup with two -or more- crystals arranged in a series to spectrally filter the SASE radiation at two -or more- closely-spaced wavelengths within the FEL gain band. This allows for the production of doublet- or multiplet-spectral lines. Applications exist over a broad range of hard X-ray wavelengths involving any process where there is a large change in cross section over a narrow wavelength range, as in multiple wavelength anomalous diffraction techniques (MAD). In this paper we consider the simultaneous operation of the LCLS hard X-ray FEL at two closely spaced wavelengths. We present simulation results for the LCLS baseline, and we show that this method can produce fully coherent radiation shared between two longitudinal modes. Mode spacing can be easily tuned within the FEL gain band, i.e. within 10 eV. An interesting aspect of the proposed scheme is a way of modulating the electron bunch at optical frequencies without a seed quantum laser. In fact, the XFEL output intensity contains an oscillating ''mode-beat'' component whose frequency is related to the frequency difference between the pair of longitudinal modes considered. Thus, at saturation one obtains FEL-induced modulations of energy loss and energy spread in the electron bunch at optical frequency. These modulations can be converted into density modulation at the same optical frequency with the help of a weak chicane installed behind the baseline undulator. Powerful coherent radiation can then be generated with the help of an optical transition radiation (OTR) station,which have important applications. In this paper we briefly

Steric asymmetry and lambda-doublet propensities in state-to-state rotationally inelastic scattering of NO(2 π/2) with He

International Nuclear Information System (INIS)

Wiskerke, Arjan E.; de Lange, Marc J.L.; Stolte, Steven; Taatjes, Craig A.; van der Avoird, Ad; Klos, Jacek

2004-01-01

Relative integrated cross sections are measured for rotationally inelastic scattering of NO( 2 π 1/2 ), hexapole selected in the upper Λ-doublet level of the ground rotational state (j = 0.5), in collisions with He at a nominal energy of 514 cm -1 . Application of a static electric field E in the scattering region, directed parallel or antiparallel to the relative velocity vector v, allows the state-selected NO molecule to be oriented with either the N end or the O end towards the incoming He atom. Laser-induced fluorescence detection of the final state of the NO molecule is used to determine the experimental steric asymmetry, SA (triple b ond) (σ v ↑↓ E -σ v ↑↑ E )/(σ v ↑↓ E + σ v ↑↑ E ), which is equal to within a factor of (-1) to the molecular steric effect, S i # yields# f (triple b ond) (σ He # yields# NO - σ He # yields# ON )/(σ He # yields# NO + σ He # yields# ON ). The dependence of the integral inelastic cross section on the incoming λ-doublet component is also observed as a function of the final rotational (j(prime)), spin-orbit ((Omega)(prime)), and Λ-doublet (ε(prime)) state. The measured steric asymmetries are significantly larger than previously observed for NO-Ar scattering, supporting earlier proposals that the repulsive part of the interaction potential is responsible for the steric asymmetry. In contrast to the case of scattering with Ar, the steric asymmetry of NO-He collisions is not very sensitive to the value of (Omega)(prime) . However, the Λ-doublet propensities are very different for ((Omega) = 0.5(F 1 ) → (Omega)(prime) = 0.5(F 1 )) transitions. Spin-orbit manifold conserving collisions exhibit a propensity for parity conservation at low Δ j , but spin-orbit manifold changing collisions do not show this propensity. In conjunction with the experiments, state-to-state cross sections for scattering of oriented NO( 2 π) molecules with He atoms are predicted from close-coupling calculations on restricted

3D direct writing fabrication of electrodes for electrochemical storage devices

Science.gov (United States)

Wei, Min; Zhang, Feng; Wang, Wei; Alexandridis, Paschalis; Zhou, Chi; Wu, Gang

2017-06-01

Among different printing techniques, direct ink writing is commonly used to fabricate 3D battery and supercapacitor electrodes. The major advantages of using the direct ink writing include effectively building 3D structure for energy storage devices and providing higher power density and higher energy density than traditional techniques due to the increased surface area of electrode. Nevertheless, direct ink writing has high standards for the printing inks, which requires high viscosity, high yield stress under shear and compression, and well-controlled viscoelasticity. Recently, a number of 3D-printed energy storage devices have been reported, and it is very important to understand the printing process and the ink preparation process for further material design and technology development. We discussed current progress of direct ink writing technologies by using various electrode materials including carbon nanotube-based material, graphene-based material, LTO (Li4Ti5O12), LFP (LiFePO4), LiMn1-xFexPO4, and Zn-based metallic oxide. Based on achieve electrochemical performance, these 3D-printed devices deliver performance comparable to the energy storage device fabricated using traditional methods still leaving large room for further improvement. Finally, perspectives are provided on the potential future direction of 3D printing for all solid-state electrochemical energy storage devices.

Precision calculations for h → WW/ZZ → 4 fermions in the Two-Higgs-Doublet Model with Prophecy4f

DEFF Research Database (Denmark)

Altenkamp, Lukas; Dittmaier, Stefan; Rzehak, Heidi

2018-01-01

We have calculated the next-to-leading-order electroweak and QCD corrections to the decay processes h → WW/ZZ → 4 fermions of the light CP-even Higgs boson h of various types of Two-Higgs-Doublet Models (Types I and II, “lepton-specific” and “flipped” models). The input parameters are defined in ...

An UV photochromic memory effect in proton-based WO3 electrochromic devices

International Nuclear Information System (INIS)

Zhang Yong; Lee, S.-H.; Mascarenhas, A.; Deb, S. K.

2008-01-01

We report an UV photochromic memory effect on a standard proton-based WO 3 electrochromic device. It exhibits two memory states, associated with the colored and bleached states of the device, respectively. Such an effect can be used to enhance device performance (increasing the dynamic range), re-energize commercial electrochromic devices, and develop memory devices

An UV photochromic memory effect in proton-based WO3 electrochromic devices

Science.gov (United States)

Zhang, Yong; Lee, S.-H.; Mascarenhas, A.; Deb, S. K.

2008-11-01

We report an UV photochromic memory effect on a standard proton-based WO3 electrochromic device. It exhibits two memory states, associated with the colored and bleached states of the device, respectively. Such an effect can be used to enhance device performance (increasing the dynamic range), re-energize commercial electrochromic devices, and develop memory devices.

Hidden U (1 ) gauge symmetry realizing a neutrinophilic two-Higgs-doublet model with dark matter

Science.gov (United States)

Nomura, Takaaki; Okada, Hiroshi

2018-04-01

We propose a neutrinophilic two-Higgs-doublet model with hidden local U (1 ) symmetry, where active neutrinos are Dirac type, and a fermionic dark matter (DM) candidate is naturally induced as a result of remnant symmetry even after the spontaneous symmetry breaking. In addition, a physical Goldstone boson arises as a consequence of two types of gauge singlet bosons and contributes to the DM phenomenologies as well as an additional neutral gauge boson. Then, we analyze the relic density of DM within the safe range of direct detection searches and show the allowed region of dark matter mass.

3D Printing of Living Responsive Materials and Devices.

Science.gov (United States)

Liu, Xinyue; Yuk, Hyunwoo; Lin, Shaoting; Parada, German Alberto; Tang, Tzu-Chieh; Tham, Eléonore; de la Fuente-Nunez, Cesar; Lu, Timothy K; Zhao, Xuanhe

2018-01-01

3D printing has been intensively explored to fabricate customized structures of responsive materials including hydrogels, liquid-crystal elastomers, shape-memory polymers, and aqueous droplets. Herein, a new method and material system capable of 3D-printing hydrogel inks with programed bacterial cells as responsive components into large-scale (3 cm), high-resolution (30 μm) living materials, where the cells can communicate and process signals in a programmable manner, are reported. The design of 3D-printed living materials is guided by quantitative models that account for the responses of programed cells in printed microstructures of hydrogels. Novel living devices are further demonstrated, enabled by 3D printing of programed cells, including logic gates, spatiotemporally responsive patterning, and wearable devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The relation between well spacing and Net Present Value in fluvial Hot Sedimentary Aquifer geothermal doublets : a West Netherlands Basin case study

NARCIS (Netherlands)

Willems, C.J.L.; Goense, T.; Maghami Nick, Hamidreza M.; Bruhn, D.F.

2016-01-01

This paper analyzes the relation between well spacing and Net Present Value of a Hot Sedimentary Aquifer geothermal doublet. First, a sensitivity analysis is carried out to evaluate the effect of uncertainty of geological and production parameters on the Net present Value. Second a finite-element

A 3-DOF haptic master device for minimally invasive surgery

Science.gov (United States)

Nguyen, Phuong-Bac; Oh, Jong-Seok; Choi, Seung-Bok

2012-04-01

This paper introduces a novel 3-DOF haptic master device for minimally invasive surgery featuring magneto-rheological (MR) fluid. It consists of three rotational motions. These motions are constituted by two bi-directional MR (BMR) plus one conventional MR brakes. The BMR brake used in the system possesses a salient advantage that its range of braking torque varies from negative to positive values. Therefore, the device is expected to be able sense in a wide environment from very soft tissues to bones. In this paper, overall of the design of the device is presented from idea, modeling, optimal design, manufacturing to control of the device. Moreover, experimental investigation is undertaken to validate the effectiveness of the device.

Has the general two-Higgs-doublet model unnatural FCNC suppression? An RGE analysis

International Nuclear Information System (INIS)

Cvetic, G.; Hwang, S.S.; Kim, C.S.

1997-01-01

There is a widespread belief that the general two-Higgs-doublet model (G2HDM) behaves unnaturally with respect to evolution of the flavor-changing neutral Yukawa coupling parameters (FCNYCP's) - i.e., that the latter, although being suppressed at low energies of probes, in general increase by a large factor as the energy of probes increases. We investigate this, by evolving Yukawa parameters by one-loop renormalization group equations and neglecting contributions of the first quark generation. For patterns of FCNYCP suppression at low energies suggested by existing quark mass hierarchies, FCNYCP's remain remarkably stable (suppressed) up to energies very close to the Landau pole. This indicates that G2HDM preserves FCNYCP suppression, for reasonably chosen patterns of that suppression at low energies. (author)

Passive athermalization of doublets in 8-13 micron waveband

Science.gov (United States)

Schuster, Norbert

2014-10-01

Passive athermalization of lenses has become a key-technology for automotive and other outdoor applications using modern uncooled 25, 17 and 12 micron pixel pitch bolometer arrays. Typical pixel counts for thermal imaging are 384x288 (qVGA), 640x480 (VGA), and 1024x768 (XGA). Two lens arrangements (called Doublets) represent a cost effective way to satisfy resolution requirements of these detectors with F-numbers 1.4 or faster. Thermal drift of index of refraction and the geometrical changes (in lenses and housing) versus temperature defocus the initial image plane from the detector plane. The passive athermalization restricts this drop of spatial resolution in a wide temperature range (typically -40°C…+80°C) to an acceptable value without any additional external refocus. In particular, lenses with long focal lengths and high apertures claim athermalization. A careful choice of lens and housing materials and a sophistical dimensioning lead to three different principles of passivation: The Passive Mechanical Athermalization (PMA) shifts the complete lens cell, the Passive Optical and Mechanical Athermalization (POMA) shifts only one lens inside the housing, the Passive Optical Athermalization (POA) works without any mechanism. All three principles will be demonstrated for a typical narrow-field lens (HFOV about 12°) with high aperture (aperture based F-number 1.3) for the actual uncooled reference detector (17micron VGA). Six design examples using different combinations of lens materials show the impact on spatial lens resolution, on overall length, and on weight. First order relations are discussed. They give some hints for optimization solutions. Pros and cons of different passive athermalization principles are evaluated in regards of housing design, availability of materials and costing. Examples with a convergent GASIR®1-lens in front distinguish by best resolution, short overall length, and lowest weight.

Toward a theory of the initiation of cancer by alpha, beta, and x radiation: the twin doublet model

International Nuclear Information System (INIS)

Marshall, J.H.; Pagnamenta, A.

1979-01-01

Information concerning the basic mechanics of interaction of radiation with matter at both the cellular and the molecular levels may now be sufficient to allow an extension of the cellular model of cancer induction to the level of individual particle tracks, ionizations, and particular bonds in the DNA molecule. The Doublet model appears promising as a candidate for the initial damage to DNA involved in cell killing, mutation, and a single cancer initiation

Zero-field studies of spin–lattice relaxation processesin non-Kramers doublet of LiF:Ni.sup.2+./sup.

Czech Academy of Sciences Publication Activity Database

Azamat, Dmitry; Badalyan, A. G.; Dejneka, Alexandr; Jastrabík, Lubomír; Lančok, Ján

2016-01-01

Roč. 122, č. 12 (2016), s. 1-5, č. článku 1026. ISSN 0947-8396 R&D Projects: GA MŠk LO1409; GA ČR GA16-22092S; GA MŠk LM2015088 Institutional support: RVO:68378271 Keywords : LiF:Ni 2+ * spin–lattice relaxation processes * non-Kramers doublet of LiF:Ni 2+ Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.455, year: 2016

Exploring collider aspects of a neutrinophilic Higgs doublet model in multilepton channels

Science.gov (United States)

Huitu, Katri; Kärkkäinen, Timo J.; Mondal, Subhadeep; Rai, Santosh Kumar

2018-02-01

We consider a neutrinophilic Higgs scenario where the Standard Model is extended by one additional Higgs doublet and three generations of singlet right-handed Majorana neutrinos. Light neutrino masses are generated through mixing with the heavy neutrinos via the Type-I seesaw mechanism when the neutrinophilic Higgs gets a vacuum expectation value (VEV). The Dirac neutrino Yukawa coupling in this scenario can be sizable compared to those in the canonical Type-I seesaw mechanism owing to the small neutrinophilic Higgs VEV giving rise to interesting phenomenological consequences. We have explored various signal regions likely to provide a hint of such a scenario at the LHC as well as at future e+e- colliders. We have also highlighted the consequences of light neutrino mass hierarchies in collider phenomenology that can complement the findings of neutrino oscillation experiments.

Instrumentation and control of the Doublet III Neutral Beam Injector System

Energy Technology Data Exchange (ETDEWEB)

Kohli, J.C.; Moore, C.D.; Drobnis, D.D.; Elischer, V.P.; Kilgore, R.; Uber, D.

1980-03-01

The hardware and software required for the operation of the Doublet III Neutral Beam Injector System (NBIS) are described. Development and implementation of this Instrumentation and Control System was divided between the major participants - General Atomic Company and Lawrence Berkeley Laboratory. The subdivision of responsibilities and the coordination of the participants' activities are described with reference to hardware and software requirements in support of the entire system. Included are a description of the operators' consoles, the interlock system and the CAMAC system. One feature of the control software is source modeling. This feature includes feedback on a shot to shot basis and adaptive control. Adaptive control permits the computer system to automatically adjust parameters after a shot, and to control the system to automatically compensate for time varying NBIS components. The Neutral Beam Power Supply features power supply modeling, fiber optic transmission of analog signals and digital control of power supply power-up/interlocks.

Higgs pair production in the CP-violating two-Higgs-doublet model

Science.gov (United States)

Bian, Ligong; Chen, Ning; Jiang, Yun

2017-12-01

The SM-like Higgs pair production is discussed in the framework of the general CP-violating two-Higgs-doublet model, where we find that the CP-violating mixing angles can be related to the Higgs self-couplings. Therefore, the future experimental searches for Higgs boson pairs can be constrained by the improved precision of the electric dipole moment measurements. Based on a series of constraints of the SM-like Higgs boson signal fits, the perturbative unitarity and stability bounds to the Higgs potential, and the most recent LHC searches for heavy Higgs bosons, we suggest a set of benchmark models for the future high-energy collider searches for Higgs pair production. The e+e- colliders operating at s = (500GeV,1 TeV) are capable of measuring the Higgs cubic self-couplings of the benchmark models directly. We also estimate the cross sections of the resonance contributions to the Higgs pair productions for the benchmark models at the future LHC and SppC/FCC-hh runs.

Instrumentation and control of the Doublet III Neutral Beam Injector System

International Nuclear Information System (INIS)

Kohli, J.C.; Moore, C.D.; Drobnis, D.D.; Elischer, V.P.; Kilgore, R.; Uber, D.

1980-03-01

The hardware and software required for the operation of the Doublet III Neutral Beam Injector System (NBIS) are described. Development and implementation of this Instrumentation and Control System was divided between the major participants - General Atomic Company and Lawrence Berkeley Laboratory. The subdivision of responsibilities and the coordination of the participants' activities are described with reference to hardware and software requirements in support of the entire system. Included are a description of the operators' consoles, the interlock system and the CAMAC system. One feature of the control software is source modeling. This feature includes feedback on a shot to shot basis and adaptive control. Adaptive control permits the computer system to automatically adjust parameters after a shot, and to control the system to automatically compensate for time varying NBIS components. The Neutral Beam Power Supply features power supply modeling, fiber optic transmission of analog signals and digital control of power supply power-up/interlocks

Search for non-minimal Higgs bosons in Z0 decays with the L3 detector at LEP

International Nuclear Information System (INIS)

Sopczak, A.

1992-01-01

A general search for neutral and charged Higgs bosons in e + e - collisions at the Z 0 resonance is reported. No assumption that the Higgs sector consists of one doublet as in the Minimal Standard Model (MSM) is made. In the MSM of electroweak interactions, a single Higgs doublet generates the masses for the gauge bosons and for the charged fermions via spontaneous breaking of the gauge symmetry. With only one doublet, Higgs boson production and decay properties depend only on the Higgs boson mass. The LEP experiments have searched for the MSM Higgs boson and exclude it for masses less than about 60 GeV. It is quite possible that the actual scalar sector in nature has more than one doublet of Higgs bosons or has Higgs bosons in other multiplets. This is expected in many theories that go beyond the Standard Model. In Supersymmetric models, at least two Higgs doublets are predicted. A model with two Higgs doublets illustrates some processes that occur in more general models. If the Higgs sector contains more than a single doublet, rates for bremsstrahlung of the lightest Higgs boson from the Z 0 are no longer uniquely predicted and are generally lower than in the MSM. At the same time, with a richer Higgs sector, pairs of Higgs particles can be produced in Z 0 decays. Therefore, if one is to find a non-MSM Higgs boson at LEP, one must search for bremsstrahlung at lower rates than predicted in the MSM and for Higgs boson pair-production. This work is based on the 1990 and 1991 L3 data sample which totals 408,000 hadronic Z 0 decays, collected at center-of-mass energies between 88.2 and 94.3 GeV. No Higgs signal inconsistent with background is observed in any of the decay channels analyzed. From the results of direct searches, model-independent limits on Higgs boson bremsstrahlung and on Higgs boson pair-production from the Z 0 are presented. The bremsstrahlung limits are interpreted in a general two-doublet model

Conformally invariant Inert Higgs doublet model: an unified model for Inflation and Dark matter

International Nuclear Information System (INIS)

Das, Moumita; Mohanty, Subhendra

2012-01-01

Motivation of our present study is the searching for an unified model which can describe both the inflation as well as dark matter. From particle physics point of view, Higgs can be the most interesting candidate for the scalar field inflation. Conformal coupling of the inflaton with the gravity can generate the density perturbation and we use this idea in a realistic inert Higgs doublet model. We study the loop corrections of this conformally coupled system and in present era there is electroweak symmetry breaking to provide the mass of the particles. Study of the mass spectrum in present era reveals the scalar dark matter with mass 33.7 GeV and lightest Higgs at 125.6 GeV.

A shallow crustal earthquake doublet from the Trans-Mexican volcanic belt (Central Mexico)

Science.gov (United States)

Quintanar, L.; Rodríguez-González, M.; Campos-Enríquez, O.

2003-04-01

The trans-Mexican volcanic belt is an active volcanic arc related to subduction along the Middle America trench and characterized by shallow seismicity and synvolcanic to postvolcanic extensional arc-parallel faulting. The Mezquital graben is a major intra-arc basin of the central trans-Mexican volcanic belt. A doublet of moderate shallow shocks occurred in March and October 1976 in the region of this graben. These earthquakes were recorded by the Mexican National Seismological network, in particular by the Bosch-Omori seismograph (T_0 = 18 s) at the Tacubaya Observatory in Mexico City. We have carefully relocated the two main shocks and their major aftershocks by reading the original records and using a modified crustal velocity model for this region. A difference of ˜50 km is observed between the locations reported by the Mexican Seismological Service and those obtained in this study, which are additionally supported by the damage distribution of these earthquakes. A first motion analysis, based on regional and teleseismic records, defines for the March and October shocks normal fault mechanisms, characterized by E-W striking fault planes, which coincides with the orientation of the master faults of the Mezquital graben. After calculating the instrumental response, the source parameters were obtained from the Bosch-Omori seismograph records by body-wave modeling. For the March earthquake, we estimate a seismic moment of 4.5×1023 dyne-cm (equivalent to M_w=5.0) and a stress drop of 0.7 MPa assuming a circular rupture model (radius = 3 km). Given the poor quality of the Bosch-Omori record for the October earthquake, we used the comparison, between both events, of long-period (T=20 sec) teleseismic records at 2 stations to obtain its corresponding source parameters. By assuming a similar stress drop as for the March event, we obtain a M_0 of 5.6×1023 dyne-cm and M_w = 5.1 with a rupture length of 6.5 km. According to gravity data, the regional E-W faults are

An architecture for integrating planar and 3D cQED devices

Energy Technology Data Exchange (ETDEWEB)

Axline, C.; Reagor, M.; Heeres, R.; Reinhold, P.; Wang, C.; Shain, K.; Pfaff, W.; Chu, Y.; Frunzio, L.; Schoelkopf, R. J. [Department of Applied Physics, Yale University, New Haven, Connecticut 06511 (United States)

2016-07-25

Numerous loss mechanisms can limit coherence and scalability of planar and 3D-based circuit quantum electrodynamics (cQED) devices, particularly due to their packaging. The low loss and natural isolation of 3D enclosures make them good candidates for coherent scaling. We introduce a coaxial transmission line device architecture with coherence similar to traditional 3D cQED systems. Measurements demonstrate well-controlled external and on-chip couplings, a spectrum absent of cross-talk or spurious modes, and excellent resonator and qubit lifetimes. We integrate a resonator-qubit system in this architecture with a seamless 3D cavity, and separately pattern a qubit, readout resonator, Purcell filter, and high-Q stripline resonator on a single chip. Device coherence and its ease of integration make this a promising tool for complex experiments.

A stacked memory device on logic 3D technology for ultra-high-density data storage

International Nuclear Information System (INIS)

Kim, Jiyoung; Hong, Augustin J; Kim, Sung Min; Shin, Kyeong-Sik; Song, Emil B; Hwang, Yongha; Xiu, Faxian; Galatsis, Kosmas; Chui, Chi On; Candler, Rob N; Wang, Kang L; Choi, Siyoung; Moon, Joo-Tae

2011-01-01

We have demonstrated, for the first time, a novel three-dimensional (3D) memory chip architecture of stacked-memory-devices-on-logic (SMOL) achieving up to 95% of cell-area efficiency by directly building up memory devices on top of front-end CMOS devices. In order to realize the SMOL, a unique 3D Flash memory device and vertical integration structure have been successfully developed. The SMOL architecture has great potential to achieve tera-bit level memory density by stacking memory devices vertically and maximizing cell-area efficiency. Furthermore, various emerging devices could replace the 3D memory device to develop new 3D chip architectures.

A stacked memory device on logic 3D technology for ultra-high-density data storage

Energy Technology Data Exchange (ETDEWEB)

Kim, Jiyoung; Hong, Augustin J; Kim, Sung Min; Shin, Kyeong-Sik; Song, Emil B; Hwang, Yongha; Xiu, Faxian; Galatsis, Kosmas; Chui, Chi On; Candler, Rob N; Wang, Kang L [Device Research Laboratory, Department of Electrical Engineering, University of California, Los Angeles, CA 90095 (United States); Choi, Siyoung; Moon, Joo-Tae, E-mail: hbt100@ee.ucla.edu [Advanced Technology Development Team and Process Development Team, Memory R and D Center, Samsung Electronics Co. Ltd (Korea, Republic of)

2011-06-24

We have demonstrated, for the first time, a novel three-dimensional (3D) memory chip architecture of stacked-memory-devices-on-logic (SMOL) achieving up to 95% of cell-area efficiency by directly building up memory devices on top of front-end CMOS devices. In order to realize the SMOL, a unique 3D Flash memory device and vertical integration structure have been successfully developed. The SMOL architecture has great potential to achieve tera-bit level memory density by stacking memory devices vertically and maximizing cell-area efficiency. Furthermore, various emerging devices could replace the 3D memory device to develop new 3D chip architectures.

Neutrinophilic two Higgs doublet model with dark matter under an alternative U(1)_{B-L} gauge symmetry

Science.gov (United States)

Nomura, Takaaki; Okada, Hiroshi

2018-03-01

We propose a Dirac type active neutrino with rank two mass matrix and a Majorana fermion dark matter candidate with an alternative local U(1)_{B-L} extension of neutrinophilic two Higgs doublet model. Our dark matter candidate can be stabilized due to charge assignment under the gauge symmetry without imposing extra discrete Z_2 symmetry and the relic density is obtained from an Z' boson exchanging process. Taking into account collider constraints on the Z' boson mass and coupling, we estimate the relic density.

A search for Higgs bosons h and A of a two doublet model is performed using ALEPH; Recherche des bosons de Higgs neutres d`un modele a deux doublets avec le detecteur ALEPH au LEP

Energy Technology Data Exchange (ETDEWEB)

Simion, S.

1995-04-01

A search of Higgs bosons h and A of a two-doublet model is performed. We analyse the data collected by ALEPH till 1993, corresponding to a luminosity of 63.4 pb{sup 1} at the Z peak. The {tau}{sup +}{tau}{sup -}q anti q and b anti b b anti b final states are mainly considered. The section criteria are available, thus improving the sensitivity of the analysis. Assuming m{sub h} = m{sub A} = 45 GeV, an upper limit of O.324 pb on the {pi}{sup +}{pi}{sup -}q anti q cross section is derived. The four-b final state selection is based on b-hadron lifetime, using the two-dimensional readout from the vertex detector. We analyse 1.53 million hadronic Z`s without any evidence for a signal (313 events seen, 270+-17 expected from the background, with 24% efficiency for m{sub h} = m{sub A} = 45 GeV.). Searches for the standard Model Higgs boson are interpreted in the framework of a two-doublet model. The decay of the lightest scalar h into a AA pair is also considered. No signal is found and the regions excluded in the (m{sub h} -m{sub A}) and (m{sub A} - tan {beta}) planes of the MSSM are presented. Influence of stop mixing is discussed. Assuming m{sub top} 170 GeV, universal quark masses m{sub Q} = 1 TeV, no stop mixing, and tan {beta} > 1, a 95% lower limit on m{sub A} equal to 45.5 GeV is derived. (authors). 60 refs., 93 figs., 15 tabs.

Electrochromic device based on electrospun WO{sub 3} nanofibers

Energy Technology Data Exchange (ETDEWEB)

Dulgerbaki, Cigdem; Maslakci, Neslihan Nohut; Komur, Ali Ihsan; Oksuz, Aysegul Uygun, E-mail: ayseguluygun@sdu.edu.tr

2015-12-15

Highlights: • WO{sub 3} electrochromic nanofibers were prepared by electrospinning technique. • WO{sub 3} nanofibers switched reversibly from transparent to blue color. • Electrochromic device was assembled using ionic liquid based gel electrolyte. • Significant optical modulation and excellent cycling stability were achieved for ECD. - Abstract: The tungsten oxide (WO{sub 3}) nanofibers were grown directly onto an ITO-coated glass via an electrospinning method for electrochromic applications. The electrochromic properties of WO{sub 3} nanofibers were investigated in the presence of different electrolytes including a series of ionic liquids and classic LiClO{sub 4}-PC system. A significant optical modulation of 20.82% at 760 nm, reversible coloration with efficiency of 64.58 cm{sup 2}/C and excellent cycling stability were achieved for the nanofiber electrochromic device (ECD) with ionic liquid based gel electrolyte.

THE PHYSICAL ORIGIN AND THE DIAGNOSTIC POTENTIAL OF THE SCATTERING POLARIZATION IN THE Li I RESONANCE DOUBLET AT 6708 A

International Nuclear Information System (INIS)

Belluzzi, Luca; Landi Degl'Innocenti, Egidio; Trujillo Bueno, Javier

2009-01-01

High-sensitivity measurements of the linearly polarized solar limb spectrum produced by scattering processes in quiet regions of the solar atmosphere showed that the Q/I profile of the lithium doublet at 6708 A has an amplitude ∼10 -4 and a curious three-peak structure, qualitatively similar to that found and confirmed by many observers in the Na I D 2 line. Given that a precise measurement of the scattering polarization profile of the lithium doublet lies at the limit of the present observational possibilities, it is worthwhile to clarify the physical origin of the observed polarization, its diagnostic potential, and what kind of Q/I shapes can be expected from theory. To this end, we have applied the quantum theory of atomic level polarization taking into account the hyperfine structure of the two stable isotopes of lithium, as well as the Hanle effect of a microturbulent magnetic field of arbitrary strength. We find that quantum interferences between the sublevels pertaining to the upper levels of the D 2 and D 1 line transitions of lithium do not cause any observable effect on the emergent Q/I profile. Our theoretical calculations show that only two Q/I peaks can be expected, with the strongest one caused by the D 2 line of 7 Li I and the weakest one due to the D 2 line of 6 Li I. Interestingly, we find that these two peaks in the theoretical Q/I profile stand out clearly only when the kinetic temperature of the thin atmospheric region that produces the emergent spectral line radiation is lower than 4000 K. The fact that such a thin atmospheric region is located around a height of 200 km in standard semi-empirical models, where the kinetic temperature is about 5000 K, leads us to suggest that the most likely Q/I profile produced by the Sun in the lithium doublet should be slightly asymmetric and dominated by the 7 Li I peak.

Flexible All-Inorganic Perovskite CsPbBr3 Nonvolatile Memory Device.

Science.gov (United States)

Liu, Dongjue; Lin, Qiqi; Zang, Zhigang; Wang, Ming; Wangyang, Peihua; Tang, Xiaosheng; Zhou, Miao; Hu, Wei

2017-02-22

All-inorganic perovskite CsPbX 3 (X = Cl, Br, or I) is widely used in a variety of photoelectric devices such as solar cells, light-emitting diodes, lasers, and photodetectors. However, studies to understand the flexible CsPbX 3 electrical application are relatively scarce, mainly due to the limitations of the low-temperature fabricating process. In this study, all-inorganic perovskite CsPbBr 3 films were successfully fabricated at 75 °C through a two-step method. The highly crystallized films were first employed as a resistive switching layer in the Al/CsPbBr 3 /PEDOT:PSS/ITO/PET structure for flexible nonvolatile memory application. The resistive switching operations and endurance performance demonstrated the as-prepared flexible resistive random access memory devices possess reproducible and reliable memory characteristics. Electrical reliability and mechanical stability of the nonvolatile device were further tested by the robust current-voltage curves under different bending angles and consecutive flexing cycles. Moreover, a model of the formation and rupture of filaments through the CsPbBr 3 layer was proposed to explain the resistive switching effect. It is believed that this study will offer a new setting to understand and design all-inorganic perovskite materials for future stable flexible electronic devices.

3D site specific sample preparation and analysis of 3D devices (FinFETs) by atom probe tomography.

Science.gov (United States)

Kambham, Ajay Kumar; Kumar, Arul; Gilbert, Matthieu; Vandervorst, Wilfried

2013-09-01

With the transition from planar to three-dimensional device architectures such as Fin field-effect-transistors (FinFETs), new metrology approaches are required to meet the needs of semiconductor technology. It is important to characterize the 3D-dopant distributions precisely as their extent, positioning relative to gate edges and absolute concentration determine the device performance in great detail. At present the atom probe has shown its ability to analyze dopant distributions in semiconductor and thin insulating materials with sub-nm 3D-resolution and good dopant sensitivity. However, so far most reports have dealt with planar devices or restricted the measurements to 2D test structures which represent only limited challenges in terms of localization and site specific sample preparation. In this paper we will discuss the methodology to extract the dopant distribution from real 3D-devices such as a 3D-FinFET device, requiring the sample preparation to be carried out at a site specific location with a positioning accuracy ∼50 nm. Copyright © 2013 Elsevier B.V. All rights reserved.

Cervical external immobilization devices: evaluation of magnetic resonance imaging issues at 3.0 Tesla.

Science.gov (United States)

Diaz, Francis L; Tweardy, Lisa; Shellock, Frank G

2010-02-15

Laboratory investigation, ex vivo. Currently, no studies have addressed the magnetic resonance imaging (MRI) issues for cervical external immobilization devices at 3-Tesla. Under certain conditions significant heating may occur, resulting in patient burns. Furthermore, artifacts can be substantial and prevent the diagnostic use of MRI. Therefore, the objective of this investigation was to evaluate MRI issues for 4 different cervical external immobilization devices at 3-Tesla. Excessive heating and substantial artifacts are 2 potential complications associated with performing MRI at 3-Tesla in patients with cervical external immobilization devices. Using ex vivo testing techniques, MRI-related heating and artifacts were evaluated for 4 different cervical devices during MRI at 3-Tesla. Four cervical external immobilization devices (Generation 80, Resolve Ring and Superstructure, Resolve Ring and Jerome Vest/Jerome Superstructure, and the V1 Halo System; Ossur Americas, Aliso Viejo, CA) underwent MRI testing at 3-Tesla. All devices were made from nonmetallic or nonmagnetic materials. Heating was determined using a gelled-saline-filled skull phantom with fluoroptic thermometry probes attached to the skull pins. MRI was performed at 3-Tesla, using a high level of RF energy. Artifacts were assessed at 3-Tesla, using standard cervical imaging techniques. The Generation 80 and V1 Halo devices exhibited substantial temperature rises (11.6 degrees C and 8.5 degrees C, respectively), with "sparking" evident for the Generation 80 during the MRI procedure. Artifacts were problematic for these devices, as well. By comparison, the 2 Resolve Ring-based cervical external immobilization devices showed little or no heating (Tesla.

Efficient, air-stable quantum dots light-emitting devices with MoO3 modifying the anode

International Nuclear Information System (INIS)

Meng, Xiangdong; Ji, Wenyu; Hua, Jie; Yu, Zhaoliang; Zhang, Yan; Li, Haibo; Zhao, Jialong

2013-01-01

In this work, we fabricated quantum dots light-emitting devices with hole-injection layer, molybdenum oxide (MoO 3 ) substituting for poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) which is hygroscopic and acidic and, therefore, a source of interface instability. A significant enhancement in luminance and current efficiency in MoO 3 -containing devices was observed. In addition, MoO 3 -containing devices were more stable in the air than those with PEDOT:PSS as the hole injection layer. The hole injection and transport of the devices were studied by the J–V characteristics of the hole-only devices. The excellent performance of the devices was principally a result of MoO 3 possessing lower injection barrier for the hole and better stability than PEDOT:PSS. -- Highlights: • We fabricated QD-LEDs with MoO 3 substituting for PEDOT:PSS as hole-injection layer. • A enhancement in luminance and efficiency in MoO 3 -containing device was observed. • The enhancement was originated from the stability and easy hole injection of MoO 3

Effects of GeI2 or ZnI2 addition to perovskite CH3NH3PbI3 photovoltaic devices

Science.gov (United States)

Tanaka, Hiroki; Ohishi, Yuya; Oku, Takeo

2018-01-01

CH3NH3PbI3 added with GeI2 or ZnI2 perovskite photovoltaic devices were fabricated characterized. The surface coverages of the perovskite layers were improved by the addition of GeI2 or ZnI2. Formation of PbI2 observed for the pristine CH3NH3PbI3 was suppressed by the GeI2 or ZnI2 addition, which resulted in the improvement of the conversion efficiencies of the perovskite photovoltaic devices.

Syntheses and multi-NMR study of fac- and mer-OsO(3)F(2)(NCCH(3)) and the X-ray crystal structure (n = 2) and Raman spectrum (n = 0) of fac-OsO(3)F(2)(NCCH(3)).nCH(3)CN.

Science.gov (United States)

Hughes, Michael J; Gerken, Michael; Mercier, Hélène P A; Schrobilgen, Gary J

2010-06-07

Dissolution of the infinite chain polymer, (OsO(3)F(2))(infinity), in CH(3)CN solvent at -40 degrees C followed by solvent removal under vacuum at -40 degrees C yielded fac-OsO(3)F(2)(NCCH(3)).nCH(3)CN (n >/= 2). Continued pumping at -40 degrees C with removal of uncoordinated CH(3)CN yielded fac-OsO(3)F(2)(NCCH(3)). Both fac-OsO(3)F(2)(NCCH(3)).nCH(3)CN and fac-OsO(3)F(2)(NCCH(3)) are yellow-brown solids and were characterized by low-temperature (-150 degrees C) Raman spectroscopy. The crystal structure (-173 degrees C) of fac-OsO(3)F(2)(NCCH(3)).2CH(3)CN consists of two co-crystallized CH(3)CN molecules and a pseudo-octahedral OsO(3)F(2).NCCH(3) molecule in which three oxygen atoms are in a facial arrangement and CH(3)CN is coordinated trans to an oxygen atom in an end-on fashion. The Os---N bond length (2.205(3) A) is among the shortest M---N adduct bonds observed for a d(0) transition metal oxide fluoride. The (19)F NMR spectrum of (OsO(3)F(2))(infinity) in CH(3)CN solvent (-40 degrees C) is a singlet (-99.6 ppm) corresponding to fac-OsO(3)F(2)(NCCH(3)). The (1)H, (15)N, (13)C, and (19)F NMR spectra of (15)N-enriched OsO(3)F(2)(NCCH(3)) were recorded in SO(2)ClF solvent (-84 degrees C). Nitrogen-15 enrichment resulted in splitting of the (19)F resonance of fac-OsO(3)F(2)((15)NCCH(3)) into a doublet ((2)J((15)N-(19)F), 21 Hz). In addition, a doublet of doublets ((2)J((19)F(ax)-(19)F(eq)), 134 Hz; (2)J((15)N-(19)F(eq)), 18 Hz) and a doublet ((2)J((19)F(ax)-(19)F(eq)), 134 Hz) were observed in the (19)F NMR spectrum that have been assigned to mer-OsO(3)F(2)((15)NCCH(3)); however, coupling of (15)N to the axial fluorine-on-osmium environment could not be resolved. The nitrogen atom of CH(3)CN is coordinated trans to a fluorine ligand in the mer-isomer. Quantum-chemical calculations at the SVWN and B3LYP levels of theory were used to calculate the energy-minimized gas-phase geometries, vibrational frequencies of fac- and mer-OsO(3)F(2)(NCCH(3)) and of CH(3)CN. The

Dark matter physics in neutrino specific two Higgs doublet model

Energy Technology Data Exchange (ETDEWEB)

Baek, Seungwon; Nomura, Takaaki [School of Physics, Korea Institute for Advanced Study,85 Hoegiro, Dongdaemun-gu, Seoul 02455 (Korea, Republic of)

2017-03-10

Although the seesaw mechanism is a natural explanation for the small neutrino masses, there are cases when the Majorana mass terms for the right-handed neutrinos are not allowed due to symmetry. In that case, if neutrino-specific Higgs doublet is introduced, neutrinos become Dirac particles and their small masses can be explained by its small VEV. We show that the same symmetry, which we assume a global U(1){sub X}, can also be used to explain the stability of dark matter. In our model, a new singlet scalar breaks the global symmetry spontaneously down to a discrete Z{sub 2} symmetry. The dark matter particle, lightest Z{sub 2}-odd fermion, is stabilized. We discuss the phenomenology of dark matter: relic density, direct detection, and indirect detection. We find that the relic density can be explained by a novel Goldstone boson channel or by resonance channel. In the most region of parameter space considered, the direct detections is suppressed well below the current experimental bound. Our model can be further tested in indirect detection experiments such as FermiLAT gamma ray searches or neutrinoless double beta decay experiments.

C P -violation in the two Higgs doublet model: From the LHC to EDMs

Science.gov (United States)

Chen, Chien-Yi; Li, Hao-Lin; Ramsey-Musolf, Michael

2018-01-01

We study the prospective sensitivity to C P -violating two Higgs doublet models from the 14 TeV LHC and future electric dipole moment (EDM) experiments. We concentrate on the search for a resonant heavy Higgs that decays to a Z boson and a SM-like Higgs h , leading to the Z (ℓℓ)h (b b ¯ ) final state. The prospective LHC reach is analyzed using the Boosted Decision Tree method. We illustrate the complementarity between the LHC and low energy EDM measurements and study the dependence of the physics reach on the degree of deviation from the alignment limit. In all cases, we find that there exists a large part of parameter space that is sensitive to both EDMs and LHC searches.

Electron impact excitation of the lowest doublet and quartet core-excited autoionizing states in Rb atoms

International Nuclear Information System (INIS)

Borovik, A; Roman, V; Zatsarinny, O; Bartschat, K

2013-01-01

Electron impact excitation of the (4p 5 5s 2 ) 2 P 3/2,1/2 and (4p 5 4d5s) 4 P 1/2,3/2,5/2 autoionizing states in rubidium atoms was studied experimentally by measuring the ejected-electron excitation functions and theoretically by employing a fully relativistic Dirac B-spline R-matrix (close-coupling) model. The experimental data were collected in an impact energy range from the respective excitation thresholds up to 50 eV with an incident electron energy resolution of 0.2 eV and an observation angle of 54.7°. Absolute values of the excitation cross sections were obtained by normalizing to the theoretical predictions. The observed near-threshold resonance structures were also analysed by comparison with theory. For the 2 P 3/2,1/2 doublet states, a detailed analysis of the R-matrix results reveals that the most intense resonances are related to odd-parity negative-ion states with dominant configurations 4p 5 5s5p 2 and 4p 5 4d5s6s. The measured excitation functions for the 2 P 1/2 and 4 P J states indicate a noticeable cascade population due to the radiative decay from high-lying autoionizing states. A comparative analysis with similar data for other alkali atoms is also presented.

Simplified dark matter models with two Higgs doublets. I. Pseudoscalar mediators

Energy Technology Data Exchange (ETDEWEB)

Bauer, Martin [Heidelberg Univ. (Germany). Inst. fuer Theoretische Physik; Haisch, Ulrich [Oxford Univ. (United Kingdom). Rudolf Peierls Centre for Theoretical Physics; CERN, Geneva (Switzerland). Theoretical Physics Dept.; Kahlhoefer, Felix [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2017-01-15

We study a new class of renormalisable simplified models for dark matter searches at the LHC that are based on two Higgs doublet models with an additional pseudoscalar mediator. In contrast to the spin-0 simplified models employed in analyses of Run I data these models are self-consistent, unitary and bounds from Higgs physics typically pose no constraints. Predictions for various missing transverse energy (E{sub T,miss}) searches are discussed and the reach of the 13 TeV LHC is explored. It is found that the proposed models provide a rich spectrum of complementary observables that lead to non-trivial constraints. We emphasise in this context the sensitivity of the t anti t+E{sub T,miss}, mono-Z and mono-Higgs channels, which yield stronger limits than mono-jet searches in large parts of the parameter space. Constraints from spin-0 resonance searches, electroweak precision measurements and flavour observables are also derived and shown to provide further important handles to constraint and to test the considered dark matter models.

Maximally Symmetric Two Higgs Doublet Model with Natural Standard Model Alignment

CERN Document Server

Dev, P S Bhupal

2014-01-01

We study the Higgs mass spectrum as predicted by a Maximally Symmetric Two Higgs Doublet Model (MS-2HDM) potential based on the SO(5) group, softly broken by bilinear Higgs mass terms. We show that the lightest Higgs sector resulting from this MS-2HDM becomes naturally aligned with that of the Standard Model (SM), independently of the charged Higgs boson mass and $\\tan \\beta$. In the context of Type-II 2HDM, SO(5) is the simplest of the three possible symmetry realizations of the scalar potential that can naturally lead to the SM alignment. Nevertheless, renormalization group effects due to the hypercharge gauge coupling $g'$ and third-generation Yukawa couplings may break sizeably this SM alignment, along with the custodial symmetry inherited by the SO(5) group. Using the current Higgs signal strength data from the LHC, which disfavour large deviations from the SM alignment limit, we derive lower mass bounds on the heavy Higgs sector as a function of $\\tan\\beta$, which can be stronger than the existing limit...

A New Design of a Single-Device 3D Hall Sensor: Cross-Shaped 3D Hall Sensor

Directory of Open Access Journals (Sweden)

Wei Tang

2018-04-01

Full Text Available In this paper, a new single-device three-dimensional (3D Hall sensor called a cross-shaped 3D Hall device is designed based on the five-contact vertical Hall device. Some of the device parameters are based on 0.18 μm BCDliteTM technology provided by GLOBALFOUNDRIES. Two-dimensional (2D and 3D finite element models implemented in COMSOL are applied to understand the device behavior under a constant magnetic field. Besides this, the influence of the sensing contacts, active region’s depth, and P-type layers are taken into account by analyzing the distribution of the voltage along the top edge and the current density inside the devices. Due to the short-circuiting effect, the sensing contacts lead to degradation in sensitivities. The P-type layers and a deeper active region in turn are responsible for the improvement of sensitivities. To distinguish the P-type layer from the active region which plays the dominant role in reducing the short-circuiting effect, the current-related sensitivity of the top edge (Stop is defined. It is found that the short-circuiting effect fades as the depth of the active region grows. Despite the P-type layers, the behavior changes a little. When the depth of the active region is 7 μm and the thickness of the P-type layers is 3 μm, the sensitivities in the x, y, and z directions can reach 91.70 V/AT, 92.36 V/AT, and 87.10 V/AT, respectively.

Microchip-based electrochemical detection using a 3-D printed wall-jet electrode device.

Science.gov (United States)

Munshi, Akash S; Martin, R Scott

2016-02-07

Three dimensional (3-D) printing technology has evolved dramatically in the last few years, offering the capability of printing objects with a variety of materials. Printing microfluidic devices using this technology offers various advantages such as ease and uniformity of fabrication, file sharing between laboratories, and increased device-to-device reproducibility. One unique aspect of this technology, when used with electrochemical detection, is the ability to produce a microfluidic device as one unit while also allowing the reuse of the device and electrode for multiple analyses. Here we present an alternate electrode configuration for microfluidic devices, a wall-jet electrode (WJE) approach, created by 3-D printing. Using microchip-based flow injection analysis, we compared the WJE design with the conventionally used thin-layer electrode (TLE) design. It was found that the optimized WJE system enhances analytical performance (as compared to the TLE design), with improvements in sensitivity and the limit of detection. Experiments were conducted using two working electrodes - 500 μm platinum and 1 mm glassy carbon. Using the 500 μm platinum electrode the calibration sensitivity was 16 times higher for the WJE device (as compared to the TLE design). In addition, use of the 1 mm glassy carbon electrode led to limit of detection of 500 nM for catechol, as compared to 6 μM for the TLE device. Finally, to demonstrate the versatility and applicability of the 3-D printed WJE approach, the device was used as an inexpensive electrochemical detector for HPLC. The number of theoretical plates was comparable to the use of commercially available UV and MS detectors, with the WJE device being inexpensive to utilize. These results show that 3-D-printing can be a powerful tool to fabricate reusable and integrated microfluidic detectors in configurations that are not easily achieved with more traditional lithographic methods.

Rotation and rotation-vibration spectroscopy of the 0+-0- inversion doublet in deuterated cyanamide.

Science.gov (United States)

Kisiel, Zbigniew; Kraśnicki, Adam; Jabs, Wolfgang; Herbst, Eric; Winnewisser, Brenda P; Winnewisser, Manfred

2013-10-03

The pure rotation spectrum of deuterated cyanamide was recorded at frequencies from 118 to 649 GHz, which was complemented by measurement of its high-resolution rotation-vibration spectrum at 8-350 cm(-1). For D2NCN the analysis revealed considerable perturbations between the lowest Ka rotational energy levels in the 0(+) and 0(-) substates of the lowest inversion doublet. The final data set for D2NCN exceeded 3000 measured transitions and was successfully fitted with a Hamiltonian accounting for the 0(+) ↔ 0(-) coupling. A smaller data set, consisting only of pure rotation and rotation-vibration lines observed with microwave techniques was obtained for HDNCN, and additional transitions of this type were also measured for H2NCN. The spectroscopic data for all three isotopic species were fitted with a unified, robust Hamiltonian allowing confident prediction of spectra well into the terahertz frequency region, which is of interest to contemporary radioastronomy. The isotopic dependence of the determined inversion splitting, ΔE = 16.4964789(8), 32.089173(3), and 49.567770(6) cm(-1), for D2NCN, HDNCN, and H2NCN, respectively, is found to be in good agreement with estimates from a simple reduced quartic-quadratic double minimum potential.

Perturbation constraint on particle masses in the Weinberg-Salam model with two massless Higgs doublets

International Nuclear Information System (INIS)

Inoue, Kenzo; Nakano, Yoshimasa; Kakuto, Akira.

1980-01-01

The Weinberg-Salam model with two Higgs doublets is investigated. The spontaneous breakdown of the gauge symmetry is assumed to be produced by the Coleman-Weinberg mechanism, keeping gauge hierarchies in grand unified theories in mind. A discrete symmetry is introduced to secure flavor-diagonal Yukawa interactions of neutral Higgs bosons and the absence of the axion. Bounds on various masses are obtained by imposing coupling constants to lie in a finite range for the validity of the perturbation theory. It will be found that there must be at least one Higgs boson whose mass is lighter than 40 GeV, in order to satisfy the perturbation constraint at the unification mass scale in grand unified theories. (author)

Inelastic collisions of OH (2Pi) with H2: Comparison between theory and experiment including rotational, fine structure, and Λ-doublet transitions

International Nuclear Information System (INIS)

Schinke, R.; Andresen, P.

1984-01-01

Detailed cross section calculations for inelastic collisions of OH ( 2 Pi) in the ground state j = 3/2, Omega-bar = 3/2 with H 2 are presented using an ab initio potential energy surface without adjustable parameters. The OH molecular wave function is described within the intermediate coupling case. The results are compared with recent experiments. The agreement is satisfactory for the final rotational state distributions within both the Omega-bar = 3/2 and the Omega-bar = 1/2 ladder. Also the relative magnitude of Omega-bar = 1/2 and 3/2 cross sections is in good accord with experiment and thus indicates that the difference potential V/sub A/'-V/sub A/'' is realistically described by the ab initio calculation. The dynamical calculations yield prefential excitation of one Λ-doublet state. The extent of this preference increases with j and is larger for Omega-bar = 3/2 in qualitative but not quantitative agreement with experiment. Possible interpretations in terms of the potential energy surfaces are briefly discussed

High density low-q discharges with D-shaped plasmas in Doublet III

International Nuclear Information System (INIS)

Nagami, Masayuki; Yoshida, Hidetoshi; Shinya, Kichiro; Yokomizo, Hideaki; Shimada, Michiya; Ioki, Kimihiro; Izumi, Shigeru; Kitsunezaki, Masao; Jahns, G.

1981-07-01

The maximum plasma current in Doublet III is found to be limited by disruptions when the limiter safety factor is approximately 2. However, due to the strong toroidal and shaping field effect on rotational transform at the outer plasma edge associated with a D-shape formation having a vertical elongation of 1.5, the safety factor q sub(a) * estimated from simple geometric considerations for D-shaped plasmas corresponds to values as low as 1.5. These discharges operate stably with considerably higher plasma current than most reactor design studies assume. These low-q discharges show excellent plasma performance: very flat spatial electron temperature progiles, high density operation with anti n sub(e)R/B sub(T) up to 7.8, and good energy confinement producing a volume average β of up to 1% with ohmic heating only. This operational regime appears to be applicable to future high β tokamaks with D-shaped cross section. (author)

Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics

Science.gov (United States)

Fu, Haoran; Nan, Kewang; Bai, Wubin; Huang, Wen; Bai, Ke; Lu, Luyao; Zhou, Chaoqun; Liu, Yunpeng; Liu, Fei; Wang, Juntong; Han, Mengdi; Yan, Zheng; Luan, Haiwen; Zhang, Yijie; Zhang, Yutong; Zhao, Jianing; Cheng, Xu; Li, Moyang; Lee, Jung Woo; Liu, Yuan; Fang, Daining; Li, Xiuling; Huang, Yonggang; Zhang, Yihui; Rogers, John A.

2018-03-01

Three-dimensional (3D) structures capable of reversible transformations in their geometrical layouts have important applications across a broad range of areas. Most morphable 3D systems rely on concepts inspired by origami/kirigami or techniques of 3D printing with responsive materials. The development of schemes that can simultaneously apply across a wide range of size scales and with classes of advanced materials found in state-of-the-art microsystem technologies remains challenging. Here, we introduce a set of concepts for morphable 3D mesostructures in diverse materials and fully formed planar devices spanning length scales from micrometres to millimetres. The approaches rely on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear mechanical buckling. Over 20 examples have been experimentally and theoretically investigated, including mesostructures that can be reshaped between different geometries as well as those that can morph into three or more distinct states. An adaptive radiofrequency circuit and a concealable electromagnetic device provide examples of functionally reconfigurable microelectronic devices.

Numerical simulation of 3D boundary-driven acoustic streaming in microfluidic devices.

Science.gov (United States)

Lei, Junjun; Hill, Martyn; Glynne-Jones, Peter

2014-02-07

This article discusses three-dimensional (3D) boundary-driven streaming in acoustofluidic devices. Firstly, the 3D Rayleigh streaming pattern in a microchannel is simulated and its effect on the movement of microparticles of various sizes is demonstrated. The results obtained from this model show good comparisons with 3D experimental visualisations and demonstrate the fully 3D nature of the acoustic streaming field and the associated acoustophoretic motion of microparticles in acoustofluidic devices. This method is then applied to another acoustofluidic device in order to gain insights into an unusual in-plane streaming pattern. The origin of this streaming has not been fully described and its characteristics cannot be explained from the classical theory of Rayleigh streaming. The simulated in-plane streaming pattern was in good agreement with the experimental visualisation. The mechanism behind it is shown to be related to the active sound intensity field, which supports our previous findings on the mechanism of the in-plane acoustic streaming pattern visualised and modelled in a thin-layered capillary device.

Temperature-Dependent Electric Field Poling Effects in CH3NH3PbI3 Optoelectronic Devices.

Science.gov (United States)

Zhang, Chuang; Sun, Dali; Liu, Xiaojie; Sheng, Chuan-Xiang; Vardeny, Zeev Valy

2017-04-06

Organo-lead halide perovskites show excellent optoelectronic properties; however, the unexpected inconsistency in forward-backward I-V characteristics remains a problem for fabricating solar panels. Here we have investigated the reasons behind this "hysteresis" by following the changes in photocurrent and photoluminescence under electric field poling in transverse CH 3 NH 3 PbI 3 -based devices from 300 to 10 K. We found that the hysteresis disappears at cryogenic temperatures, indicating the "freeze-out" of the ionic diffusion contribution. When the same device is cooled under continuous poling, the built-in electric field from ion accumulation brings significant photovoltaic effect even at 10 K. From the change of photoluminescence upon polling, we found a second dipole-related mechanism which enhances radiative recombination upon the alignment of the organic cations. The ionic origin of hysteresis was also verified by applying a magnetic field to affect the ion diffusion. These findings reveal the coexistence of ionic and dipole-related mechanisms for the hysteresis in hybrid perovskites.

Nonvolatile rewritable memory device based on solution-processable graphene/poly(3-hexylthiophene) nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Zhang, Li, E-mail: lizhang9@zzu.edu.cn [School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450052 (China); Li, Ye; Shi, Jun [School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450052 (China); Shi, Gaoquan [Department of Chemistry, Tsinghua University, Beijing 100084 (China); Cao, Shaokui, E-mail: Caoshaokui@zzu.edu.cn [School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450052 (China)

2013-11-01

An electrically bistable device utilizing a nanocomposite of hexadecylamine-functionalized graphene oxide (HDAGO) with poly(3-hexylthiophene) (P3HT) is demonstrated. The device has an ITO/P3HT-HDAGO/Al sandwich structure, in which the composite film of P3HT-HDAGO was prepared by simple solution phase mixing of the exfoliated HDAGO monolayers with P3HT matrix and a spin-coating method. The memory device exhibits typical bistable electrical switching behavior and a nonvolatile rewritable memory effect, with a turn-on voltage of about 1.5 V and an ON/OFF-state current ratio of 10{sup 5}. Under ambient conditions, both the ON and OFF states are stable under a constant voltage stress or a continuous pulse voltage stress at a read voltage of 1 V. The conduction mechanism is deduced from the modeling of the nature of currents in both states, and the electrical switching behavior can be attributed to the electric-field-induced charge transfer between P3HT and HDAGO nanosheets. - Highlights: • Nonvolatile rewritable memory effect in P3HT–graphene composite is demonstrated. • The memory device was fabricated through a simple solution processing technique. • The device shows a remarkable electrical bistable behavior and excellent stability. • Memory mechanism is deduced from the modeling of the currents in both states.

Nonvolatile rewritable memory device based on solution-processable graphene/poly(3-hexylthiophene) nanocomposite

International Nuclear Information System (INIS)

Zhang, Li; Li, Ye; Shi, Jun; Shi, Gaoquan; Cao, Shaokui

2013-01-01

An electrically bistable device utilizing a nanocomposite of hexadecylamine-functionalized graphene oxide (HDAGO) with poly(3-hexylthiophene) (P3HT) is demonstrated. The device has an ITO/P3HT-HDAGO/Al sandwich structure, in which the composite film of P3HT-HDAGO was prepared by simple solution phase mixing of the exfoliated HDAGO monolayers with P3HT matrix and a spin-coating method. The memory device exhibits typical bistable electrical switching behavior and a nonvolatile rewritable memory effect, with a turn-on voltage of about 1.5 V and an ON/OFF-state current ratio of 10 5 . Under ambient conditions, both the ON and OFF states are stable under a constant voltage stress or a continuous pulse voltage stress at a read voltage of 1 V. The conduction mechanism is deduced from the modeling of the nature of currents in both states, and the electrical switching behavior can be attributed to the electric-field-induced charge transfer between P3HT and HDAGO nanosheets. - Highlights: • Nonvolatile rewritable memory effect in P3HT–graphene composite is demonstrated. • The memory device was fabricated through a simple solution processing technique. • The device shows a remarkable electrical bistable behavior and excellent stability. • Memory mechanism is deduced from the modeling of the currents in both states

Measurements of ODAK-3K plasma device using plastic track detectors

International Nuclear Information System (INIS)

2010-01-01

In this study, some testing experiments on the fusion researches with a new-constructed plasma focus (PF) device, namely ODAK-3K are reported. The device has a maximal energy input of 3 kJ and is used for both plasma and D D reaction explorations. Experiments with deuterium have shown that peak current of I p eak=39 kA flows between the electrodes at P=11.5 mbar for the operation voltage of V=14 kV. Average total neutron yield is measured around 3.3x10 5 neutrons per shot using CR-39 plastic detectors located opposite the anode inside the PF chamber

B → nK* and B → φKS Decays in the Two Higgs Doublet Model III

International Nuclear Information System (INIS)

Shuai-Wei, Wang; Tai-Ping, Song; Lin-Xia, Lü

2008-01-01

Using the QCD factorization approach, we investigate the large branching ratios of B →φ K s decays and tjhe S φKs anomaly of B →K s decay in the two Higgs doublet model III. With the contributions of flavour-changing neutral current mediated by the neutral Higgs bosons H 0 , h 0 and A 0 at the tree level, we provide a coherent resolution to these anomalies within the constrained parameter spaces, which are 120 bs λ ss | <136. This will be really interesting in searching for the signs of new physics. (the physics of elementary particles and fields)

Radiative generation of quark masses and mixing angles in the two Higgs doublet model

International Nuclear Information System (INIS)

Ibarra, Alejandro; Solaguren-Beascoa, Ana

2014-01-01

We present a framework to generate the quark mass hierarchies and mixing angles by extending the Standard Model with one extra Higgs doublet. The charm and strange quark masses are generated by small quantum effects, thus explaining the hierarchy between the second and third generation quark masses. All the mixing angles are also generated by small quantum effects: the Cabibbo angle is generated at zeroth order in perturbation theory, while the remaining off-diagonal entries of the Cabibbo–Kobayashi–Maskawa matrix are generated at first order, hence explaining the observed hierarchy |V ub |,|V cb |≪|V us |. The values of the radiatively generated parameters depend only logarithmically on the heavy Higgs mass, therefore this framework can be reconciled with the stringent limits on flavor violation by postulating a sufficiently large new physics scale

A novel method of TVTS in the TS-3 device and the proposal of its application to a large device

International Nuclear Information System (INIS)

Tokimatsu, K.; Hayashi, N.; Ueda, Y.; Ono, Y.; Katsurai, M.

1997-01-01

A novel method of television Thomson scattering (TVTS) has been developed in the TS-3 device. In this system, a framing camera is located between a spectroscope and a close coupled device camera. This framing camera can take two successive frames from the exit of the spectroscope. The time interval is of 500 ns between those two frames. Because of the shortness of this time interval, the background light is negligible; moreover TVTS is applicable to the TS-3 device whose plasma lifetime is about 150 μs. This method indicates the possibility of not only high spatial resolution but also time repetition in a simple system. (orig.)

Two Higgs Doublet Model and Model Independent Interpretation of Neutral Higgs Boson Searches

CERN Document Server

Abbiendi, G.; Ainsley, C.; Akesson, P.F.; Alexander, G.; Allison, John; Anderson, K.J.; Arcelli, S.; Asai, S.; Ashby, S.F.; Axen, D.; Azuelos, G.; Bailey, I.; Ball, A.H.; Barberio, E.; Barlow, Roger J.; Baumann, S.; Behnke, T.; Bell, Kenneth Watson; Bella, G.; Bellerive, A.; Benelli, G.; Bentvelsen, S.; Bethke, S.; Biebel, O.; Bloodworth, I.J.; Boeriu, O.; Bock, P.; Bohme, J.; Bonacorsi, D.; Boutemeur, M.; Braibant, S.; Bright-Thomas, P.; Brigliadori, L.; Brown, Robert M.; Burckhart, H.J.; Cammin, J.; Capiluppi, P.; Carnegie, R.K.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Clarke, P.E.L.; Clay, E.; Cohen, I.; Cooke, O.C.; Couchman, J.; Couyoumtzelis, C.; Coxe, R.L.; Csilling, A.; Cuffiani, M.; Dado, S.; Dallavalle, G.Marco; Dallison, S.; de Roeck, A.; de Wolf, E.; Dervan, P.; Desch, K.; Dienes, B.; Dixit, M.S.; Donkers, M.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Estabrooks, P.G.; Etzion, E.; Fabbri, F.; Fanti, M.; Feld, L.; Ferrari, P.; Fiedler, F.; Fleck, I.; Ford, M.; Frey, A.; Furtjes, A.; Futyan, D.I.; Gagnon, P.; Gary, J.W.; Gaycken, G.; Geich-Gimbel, C.; Giacomelli, G.; Giacomelli, P.; Glenzinski, D.; Goldberg, J.; Grandi, C.; Graham, K.; Gross, E.; Grunhaus, J.; Gruwe, M.; Gunther, P.O.; Hajdu, C.; Hanson, G.G.; Hansroul, M.; Hapke, M.; Harder, K.; Harel, A.; Harin-Dirac, M.; Hauke, A.; Hauschild, M.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Hensel, C.; Herten, G.; Heuer, R.D.; Hill, J.C.; Hocker, James Andrew; Hoffman, Kara Dion; Homer, R.J.; Honma, A.K.; Horvath, D.; Hossain, K.R.; Howard, R.; Huntemeyer, P.; Igo-Kemenes, P.; Ishii, K.; Jacob, F.R.; Jawahery, A.; Jeremie, H.; Jones, C.R.; Jovanovic, P.; Junk, T.R.; Kanaya, N.; Kanzaki, J.; Karapetian, G.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Kim, D.H.; Klein, K.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Kokott, T.P.; Komamiya, S.; Kowalewski, Robert V.; Kress, T.; Krieger, P.; von Krogh, J.; Kuhl, T.; Kupper, M.; Kyberd, P.; Lafferty, G.D.; Landsman, H.; Lanske, D.; Lawson, I.; Layter, J.G.; Leins, A.; Lellouch, D.; Letts, J.; Levinson, L.; Liebisch, R.; Lillich, J.; List, B.; Littlewood, C.; Lloyd, A.W.; Lloyd, S.L.; Loebinger, F.K.; Long, G.D.; Losty, M.J.; Lu, J.; Ludwig, J.; Macchiolo, A.; Macpherson, A.; Mader, W.; Marcellini, S.; Marchant, T.E.; Martin, A.J.; Martin, J.P.; Martinez, G.; Mashimo, T.; Mattig, Peter; McDonald, W.John; McKenna, J.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Mendez-Lorenzo, P.; Menges, W.; Merritt, F.S.; Mes, H.; Michelini, A.; Mihara, S.; Mikenberg, G.; Miller, D.J.; Mohr, W.; Montanari, A.; Mori, T.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nisius, R.; O'Neale, S.W.; Oakham, F.G.; Odorici, F.; Ogren, H.O.; Oh, A.; Okpara, A.; Oreglia, M.J.; Orito, S.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Patt, J.; Pfeifenschneider, P.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poli, B.; Polok, J.; Pooth, O.; Przybycien, M.; Quadt, A.; Rembser, C.; Renkel, P.; Rick, H.; Rodning, N.; Roney, J.M.; Rosati, S.; Roscoe, K.; Rossi, A.M.; Rozen, Y.; Runge, K.; Runolfsson, O.; Rust, D.R.; Sachs, K.; Saeki, T.; Sahr, O.; Sarkisyan, E.K.G.; Sbarra, C.; Schaile, A.D.; Schaile, O.; Scharff-Hansen, P.; Schroder, Matthias; Schumacher, M.; Schwick, C.; Scott, W.G.; Seuster, R.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.P.; Skuja, A.; Smith, A.M.; Snow, G.A.; Sobie, R.; Soldner-Rembold, S.; Spagnolo, S.; Sproston, M.; Stahl, A.; Stephens, K.; Stoll, K.; Strom, David M.; Strohmer, R.; Stumpf, L.; Surrow, B.; Talbot, S.D.; Tarem, S.; Taylor, R.J.; Teuscher, R.; Thiergen, M.; Thomas, J.; Thomson, M.A.; Torrence, E.; Towers, S.; Toya, D.; Trefzger, T.; Trigger, I.; Trocsanyi, Z.; Tsur, E.; Turner-Watson, M.F.; Ueda, I.; Vachon, B.; Vannerem, P.; Verzocchi, M.; Voss, H.; Vossebeld, J.; Waller, D.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wengler, T.; Wermes, N.; Wetterling, D.; White, J.S.; Wilson, G.W.; Wilson, J.A.; Wyatt, T.R.; Yamashita, S.; Zacek, V.; Zer-Zion, D.

2001-01-01

Searches for the neutral Higgs bosons h0 and A0, are used to obtain limits on the Type II Two Higgs Doublet Model (2HDM(II)) with no CP-violation in the Higgs sector and no additional particles besides the five Higgs bosons. The analysis combines approximately 170 pb-1 of data collected with the OPAL detector at sqrt{s} ~ 189 GeV with previous runs at sqrt{s} ~ mZ and sqrt{s} ~ 183 GeV. The searches are sensitive to the h0, A0 -> qq, gg, tau+tau- and h0 -> A0A0 decay modes of the Higgs bosons. For the first time, the 2HDM(II) parameter space is explored in a detailed scan, and new flavour independent analyses are applied to examine regions in which the neutral Higgs bosons decay predominantly into light quarks or gluons. Model-independent limits are also given.

Almost-commutative geometries beyond the standard model: III. Vector doublets

International Nuclear Information System (INIS)

Squellari, Romain; Stephan, Christoph A

2007-01-01

We will present a new extension of the standard model of particle physics in its almost-commutative formulation. This extension has as its basis the algebra of the standard model with four summands (Iochum et al 2004 J. Math. Phys. 45 5003 (Preprint hep-th/0312276), Jureit J-H and Stephan C 2005 J. Math. Phys. 46 043512 (Preprint hep-th/0501134), Schuecker T 2005 Krajewski diagrams and spin lifts Preprint hep-th/0501181, Jureit et al 2005 J. Math. Phys. 46 072303 (Preprint hep-th/0503190), Jureit J-H and Stephan C 2006 On a classification of irreducible almost commutative geometries: IV (Preprint hep-th/0610040)), and enlarges only the particle content by an arbitrary number of generations of left-right symmetric doublets which couple vectorially to the U(1) Y x SU(2) w subgroup of the standard model. As in the model presented in Stephan (2007 Almost-commutative geometries beyond the standard model: II. New Colours Preprint hep-th/0706.0595), which introduced particles with a new colour, grand unification is no longer required by the spectral action. The new model may also possess a candidate for dark matter in the hundred TeV mass range with neutrino-like cross section

Transparent Cu4O3/ZnO heterojunction photoelectric devices

Science.gov (United States)

Kim, Hong-Sik; Yadav, Pankaj; Patel, Malkeshkumar; Kim, Joondong; Pandey, Kavita; Lim, Donggun; Jeong, Chaehwan

2017-12-01

The present article reports the development of flexible, self-biased, broadband, high speed and transparent heterojunction photodiode, which is essentially important for the next generation electronic devices. We grow semitransparent p-type Cu4O3 using the reactive sputtering method at room temperature. The structural and optical properties of the Cu4O3 film were investigated by using the X-ray diffraction and UV-visible spectroscopy, respectively. The p-Cu4O3/n-ZnO heterojunction diode under dark condition yields rectification behavior with an extremely low saturation current value of 1.8 × 10-10 A and a zero bias photocurrent under illumination condition. The transparent p-Cu4O3/n-ZnO heterojunction photodetector can be operated without an external bias, due to the light-induced voltage production. The metal oxide heterojunction based on Cu4O3/ZnO would provide a route for the transparent and flexible photoelectric devices, including photodetectors and photovoltaics.

Alternative [SU(3]4 model of leptonic color and dark matter

Directory of Open Access Journals (Sweden)

Corey Kownacki

2018-03-01

Full Text Available The alternative [SU(3]4 model of leptonic color and dark matter is discussed. It unifies at MU∼1014 GeV and has the low-energy subgroup SU(3q×SU(2l×SU(2L×SU(2R×U(1X with (u,hR instead of (u,dR as doublets under SU(2R. It has the built-in global U(1 dark symmetry which is generalized B–L. In analogy to SU(3q quark triplets, it has SU(2l hemion doublets which have half-integral charges and are confined by SU(2l gauge bosons (stickons. In analogy to quarkonia, their vector bound states (hemionia are uniquely suited for exploration at a future e−e+ collider.

Alternative [SU(3)]4 model of leptonic color and dark matter

Science.gov (United States)

Kownacki, Corey; Ma, Ernest; Pollard, Nicholas; Popov, Oleg; Zakeri, Mohammadreza

2018-03-01

The alternative [ SU (3) ] 4 model of leptonic color and dark matter is discussed. It unifies at MU ∼1014 GeV and has the low-energy subgroup SU(3)q × SU(2)l × SU(2)L × SU(2)R × U(1)X with (u , h) R instead of (u , d) R as doublets under SU(2)R. It has the built-in global U (1) dark symmetry which is generalized B- L. In analogy to SU(3)q quark triplets, it has SU(2)l hemion doublets which have half-integral charges and are confined by SU(2)l gauge bosons (stickons). In analogy to quarkonia, their vector bound states (hemionia) are uniquely suited for exploration at a future e-e+ collider.

High-performance flexible resistive memory devices based on Al2O3:GeOx composite

Science.gov (United States)

Behera, Bhagaban; Maity, Sarmistha; Katiyar, Ajit K.; Das, Samaresh

2018-05-01

In this study a resistive switching random access memory device using Al2O3:GeOx composite thin films on flexible substrate is presented. A bipolar switching characteristic was observed for the co-sputter deposited Al2O3:GeOx composite thin films. Al/Al2O3:GeOx/ITO/PET memory device shows excellent ON/OFF ratio (∼104) and endurance (>500 cycles). GeOx nanocrystals embedded in the Al2O3 matrix have been found to play a significant role in enhancing the switching characteristics by facilitating oxygen vacancy formation. Mechanical endurance was retained even after several bending. The conduction mechanism of the device was qualitatively discussed by considering Ohmic and SCLC conduction. This flexible device is a potential candidate for next-generation electronics device.

Time domain topology optimization of 3D nanophotonic devices

DEFF Research Database (Denmark)

Elesin, Yuriy; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard

2014-01-01

We present an efficient parallel topology optimization framework for design of large scale 3D nanophotonic devices. The code shows excellent scalability and is demonstrated for optimization of broadband frequency splitter, waveguide intersection, photonic crystal-based waveguide and nanowire...

The Associated Absorption Features in Quasar Spectra of the Sloan Digital Sky Survey. I. Mg II Absorption Doublets

Science.gov (United States)

Chen, Zhi-Fu; Huang, Wei-Rong; Pang, Ting-Ting; Huang, Hong-Yan; Pan, Da-Sheng; Yao, Min; Nong, Wei-Jing; Lu, Mei-Mei

2018-03-01

Using the SDSS spectra of quasars included in the DR7Q or DR12Q catalogs, we search for Mg II λλ2796, 2803 narrow absorption doublets in the spectra data around Mg II λ2798 emission lines. We obtain 17,316 Mg II doublets, within the redshift range of 0.3299 ≤ z abs ≤ 2.5663. We find that a velocity offset of υ r 6000 km s‑1. If associated Mg II absorbers are defined by υ r present at least one associated Mg II system with {W}{{r}}λ 2796≥slant 0.2 \\mathringA . The fraction of associated Mg II systems with high-velocity outflows correlates with the average luminosities of their central quasars, indicating a relationship between outflows and the quasar feedback power. The υ r distribution of the outflow Mg II absorbers is peaked at 1023 km s‑1, which is smaller than the corresponding value of the outflow C IV absorbers. The redshift number density evolution of absorbers (dn/dz) limited by υ r > ‑3000 km s‑1 differs from that of absorbers constrained by υ r > 2000 km s‑1. Absorbers limited by υ r > 2000 km s‑1 and higher values exhibit profiles similar to dn/dz. In addition, the dn/dz is smaller when absorbers are constrained with larger υ r . The distributions of equivalent widths, and the ratio of {W}rλ 2796/{W}rλ 2803, are the same for associated and intervening systems, and independent of quasar luminosity.

Room-temperature spintronic effects in Alq3-based hybrid devices

NARCIS (Netherlands)

Dediu, V.; Hueso, L.E.; Bergenti, I; Riminucci, A.; Borgatti, F.; Graziosi, P.; Newby, C.; Casoli, F.; de Jong, Machiel Pieter; Taliani, C.; Zhan, Y.

2008-01-01

We report on efficient spin polarized injection and transport in long 102 nm channels of Alq3 organic semiconductor. We employ vertical spin valve devices with a direct interface between the bottom manganite electrode and Alq3, while the top-electrode geometry consists of an insulating tunnel

A simple device for the stereoscopic display of 3D CT images

International Nuclear Information System (INIS)

Haveri, M.; Suramo, I.; Laehde, S.; Karhula, V.; Junila, J.

1997-01-01

We describe a simple device for creating true 3D views of image pairs obtained at 3D CT reconstruction. The device presents the images in a slightly different angle of view for the left and the right eyes. This true 3D viewing technique was applied experimentally in the evaluation of complex acetabular fractures. Experiments were also made to determine the optimal angle between the images for each eye. The angle varied between 1 and 7 for different observers and also depended on the display field of view used. (orig.)

CP-violation in the ZZZ and ZWW vertices at e"+e"− colliders in Two-Higgs-Doublet Models

International Nuclear Information System (INIS)

Grzadkowski, B.; Ogreid, O.M.; Osland, P.

2016-01-01

We discuss possibilities of measuring CP violation in the Two-Higgs-Doublet Model by studying effects of one-loop generated ZZZ and ZWW vertices. We discuss a set of CP-sensitive asymmetries for ZZ and W"+W"− production at linear e"+e"−-colliders, that directly depends on the weak-basis invariant ℑJ_2 that parametrises the strength of CP violation. Given the restrictions on this model that follow from the LHC measurements, the predicted effects are small. Pursuing such measurements is however very important, as an observed signal might point to a richer scalar sector.

Electric dipole moments of charged leptons and lepton flavor violating interactions in the general two Higgs doublet model

International Nuclear Information System (INIS)

Iltan, E. O.

2001-01-01

We calculate the electric dipole moment of the electron using the experimental result of the muon electric dipole moment and upper limit of the BR(μ->eγ) in the framework of the general two Higgs doublet model. Our prediction is 10 -32 ecm, which lies in the experimental current limits. Further, we obtain constraints for the Yukawa couplings {bar ξ} N,τe D and {bar ξ} N,τμ D . Finally, we present an expression which connects the BR(τ->μγ) and the electric dipole moment of the τ lepton and study the relation between these physical quantities

Higgs phenomenology in the minimal S U (3 )L×U (1 )X model

Science.gov (United States)

Okada, Hiroshi; Okada, Nobuchika; Orikasa, Yuta; Yagyu, Kei

2016-07-01

We investigate the phenomenology of a model based on the S U (3 )c×S U (3 )L×U (1 )X gauge theory, the so-called 331 model. In particular, we focus on the Higgs sector of the model which is composed of three S U (3 )L triplet Higgs fields and is the minimal form for realizing a phenomenologically acceptable scenario. After the spontaneous symmetry breaking S U (3 )L×U (1 )X→S U (2 )L×U (1 )Y , our Higgs sector effectively becomes that with two S U (2 )L doublet scalar fields, in which the first- and the second-generation quarks couple to a different Higgs doublet from that which couples to the third-generation quarks. This structure causes the flavor-changing neutral current mediated by Higgs bosons at the tree level. By taking an alignment limit of the mass matrix for the C P -even Higgs bosons, which is naturally realized in the case with the breaking scale of S U (3 )L×U (1 )X much larger than that of S U (2 )L×U (1 )Y, we can avoid current constraints from flavor experiments such as the B0-B¯ 0 mixing even for the Higgs bosons masses that are O (100 ) GeV . In this allowed parameter space, we clarify that a characteristic deviation in quark Yukawa couplings of the Standard Model-like Higgs boson is predicted, which has a different pattern from that seen in two Higgs doublet models with a softly broken Z2 symmetry. We also find that the flavor-violating decay modes of the extra Higgs boson, e.g., H /A →t c and H±→t s , can be dominant, and they yield the important signature to distinguish our model from the two Higgs doublet models.

Three-body calculation of two-body threshold electrodisintegration of 3He and 3H

International Nuclear Information System (INIS)

Heimbach, C.R.; Lehman, D.R.; O'Connell, J.S.

1977-01-01

Threshold two-body electrodisintegration of 3 He and 3 H is investigated within the context of exact three-body theory. The calculations performed are based on the formalism of Gibson and Lehman. Careful consideration is given to the singularities of the disintegration Born amplitude for this case, since the momentum transfer is not zero, to assure validity of the numerical methods. Calculated results are compared with all the latest threshold 3 He electrodisintegration data which samples a range of scattered-electron angles, 92.6 0 0 , and incident electron energies, 40 MeV 0 3 H electrodisintegration for some of the same kinematics. The mechanism for the sharp rise as a function of excitation energy in the (e,e') cross section for theta/sub e/ approx. 90 0 due to the 2 S → 2 S monopole transition from Coulomb scattering is singled out by examination of the contributions to the Coulomb doublet amplitude. A similar analysis is carried out for the doublet and quartet transverse amplitudes where the 2 S → 4 P magnetic quadrupole transition dominates for excitation energies less than 20 MeV

A feasibility analysis of replacing the standard ammonia refrigeration device with the cascade NH3/CO2 refrigeration device in the food industry

Directory of Open Access Journals (Sweden)

Jankovich Dennis

2015-01-01

Full Text Available The thermodynamic analysis demonstrates the feasibility of replacing the standard ammonia refrigeration device with the cascade NH3/CO2 refrigeration device in the food industry. The main reason for replacement is to reduce the total amount of ammonia in spaces like deep-freezing chambers, daily chambers, working rooms and technical passageways. An ammonia-contaminated area is hazardous to human health and the safety of food products. Therefore the preferred reduced amount of ammonia is accumulated in the Central Refrigeration Engine Room, where the cascade NH3/CO2 device is installed as well. Furthermore, the analysis discusses and compares two left Carnot¢s refrigeration cycles, one for the standard ammonia device and the other for the cascade NH3/CO2 device. Both cycles are processes with two-stage compression and two-stage throttling. The thermodynamic analysis demonstrates that the selected refrigeration cycle is the most cost-effective process because it provides the best numerical values for the total refrigeration factor with respect to the observed refrigeration cycle. The chief analyzed influential parameters of the cascade device are: total refrigeration load, total reactive power, mean temperature of the heat exchanger, evaporating and condensing temperature of the low-temperature part.

Impact of Low Molecular Weight Poly(3-hexylthiophene)s as Additives in Organic Photovoltaic Devices.

Science.gov (United States)

Seibers, Zach D; Le, Thinh P; Lee, Youngmin; Gomez, Enrique D; Kilbey, S Michael

2018-01-24

Despite tremendous progress in using additives to enhance the power conversion efficiency of organic photovoltaic devices, significant challenges remain in controlling the microstructure of the active layer, such as at internal donor-acceptor interfaces. Here, we demonstrate that the addition of low molecular weight poly(3-hexylthiophene)s (low-MW P3HT) to the P3HT/fullerene active layer increases device performance up to 36% over an unmodified control device. Low MW P3HT chains ranging in size from 1.6 to 8.0 kg/mol are blended with 77.5 kg/mol P3HT chains and [6,6]-phenyl C 61 butyric acid methyl ester (PCBM) fullerenes while keeping P3HT/PCBM ratio constant. Optimal photovoltaic device performance increases are obtained for each additive when incorporated into the bulk heterojunction blend at loading levels that are dependent upon additive MW. Small-angle X-ray scattering and energy-filtered transmission electron microscopy imaging reveal that domain sizes are approximately invariant at low loading levels of the low-MW P3HT additive, and wide-angle X-ray scattering suggests that P3HT crystallinity is unaffected by these additives. These results suggest that oligomeric P3HTs compatibilize donor-acceptor interfaces at low loading levels but coarsen domain structures at higher loading levels and they are consistent with recent simulations results. Although results are specific to the P3HT/PCBM system, the notion that low molecular weight additives can enhance photovoltaic device performance generally provides a new opportunity for improving device performance and operating lifetimes.

A device that operates within a self-assembled 3D DNA crystal

Science.gov (United States)

Hao, Yudong; Kristiansen, Martin; Sha, Ruojie; Birktoft, Jens J.; Hernandez, Carina; Mao, Chengde; Seeman, Nadrian C.

2017-08-01

Structural DNA nanotechnology finds applications in numerous areas, but the construction of objects, 2D and 3D crystalline lattices and devices is prominent among them. Each of these components has been developed individually, and most of them have been combined in pairs. However, to date there are no reports of independent devices contained within 3D crystals. Here we report a three-state 3D device whereby we change the colour of the crystals by diffusing strands that contain dyes in or out of the crystals through the mother-liquor component of the system. Each colouring strand is designed to pair with an extended triangle strand by Watson-Crick base pairing. The arm that contains the dyes is quite flexible, but it is possible to establish the presence of the duplex proximal to the triangle by X-ray crystallography. We modelled the transition between the red and blue states through a simple kinetic model.

3D Printed Composites for Topology Transforming Multifunctional Devices

Science.gov (United States)

2017-01-26

panels connected by hinges, which occupy infinitesimal space but control the angles between two panels. Figure 2.2.1-3 shows panels are connected by...observations that higher curing temperature yields to more compacted and better connected silver NPs. The Young’s moduli, however, are lower than that of...AFRL-AFOSR-VA-TR-2017-0021 3D Printed Composites for Topology -Transforming Multifunctional Devices Kurt Maute REGENTS OF THE UNIVERSITY OF COLORADO

Rapid fabrication of Al{sub 2}O{sub 3} encapsulations for organic electronic devices

Energy Technology Data Exchange (ETDEWEB)

Ali, Kamran; Ali, Junaid [Department of Mechatronics Engineering, Jeju National University, Jeju 690-756 (Korea, Republic of); Mehdi, Syed Murtuza [Department of Mechanical Engineering, NED University of Engineering and Technology, Karachi 75270 (Pakistan); Choi, Kyung-Hyun, E-mail: amm@jejunu.ac.kr [Department of Mechatronics Engineering, Jeju National University, Jeju 690-756 (Korea, Republic of); An, Young Jin [Jeonnam Science and Technology Promotion Center, Yeongam-gun, Jeollanam-do 526-897 (Korea, Republic of)

2015-10-30

Highlights: • Al{sub 2}O{sub 3} encapsulations are being developed through a unique R2R-AALD system. • The encapsulations have resulted in life time enhancement of PVP memristor devices. • The Al{sub 2}O{sub 3} encapsulated memristor performed with superior stability for four weeks. • Encapsulated devices performed efficiently even after bending test for 100 cycles. - Abstract: Organic electronics have earned great reputation in electronic industry yet they suffer technical challenges such as short lifetimes and low reliability because of their susceptibility to water vapor and oxygen which causes their fast degradation. This paper report on the rapid fabrication of Al{sub 2}O{sub 3} encapsulations through a unique roll-to-roll atmospheric atomic layer deposition technology (R2R-AALD) for the life time enhancement of organic poly (4-vinylphenol) (PVP) memristor devices. The devices were then categorized into two sets. One was processed with R2R-AALD Al{sub 2}O{sub 3} encapsulations at 50 °C and the other one was kept as un-encapsulated. The field-emission scanning electron microscopy (FESEM) results revealed that pin holes and other irregularities in PVP films with average arithmetic roughness (R{sub a}) of 9.66 nm have been effectively covered by Al{sub 2}O{sub 3} encapsulation having R{sub a} of 0.92 nm. The X-ray photoelectron spectroscopy XPS spectrum for PVP film showed peaks of C 1s and O 1s at the binding energies of 285 eV and 531 eV, respectively. The respective appearance of Al 2p, Al 2s, and O 1s peaks at the binding energies of 74 eV, 119 eV, and 531 eV, confirms the fabrication of Al{sub 2}O{sub 3} films. Electrical current–voltage (I–V) measurements confirmed that the Al{sub 2}O{sub 3} encapsulation has a huge influence on the performance, robustness and life time of memristor devices. The Al{sub 2}O{sub 3} encapsulated memristor performed with superior stability for four weeks whereas the un-encapsulated devices could only last for one

Perturbed Lepton-Specific Two-Higgs-Doublet Model Facing Experimental Hints for Physics beyond the Standard Model.

Science.gov (United States)

Crivellin, Andreas; Heeck, Julian; Stoffer, Peter

2016-02-26

BABAR, Belle, and LHCb Collaborations report evidence for new physics in B→Dτν and B→D^{*}τν of approximately 3.8σ. There is also the long lasting discrepancy of about 3σ in the anomalous magnetic moment of the muon, and the branching ratio for τ→μνν is 1.8σ (2.4σ) above the standard model expectation using the HFAG (PDG) values. Furthermore, CMS Collaboration finds hints for a nonzero decay rate of h→μτ. Interestingly, all these observations can be explained by introducing new scalars. In this Letter we consider these processes within a lepton-specific two-Higgs doublet model (i.e., of type X) with additional nonstandard Yukawa couplings. It is found that one can accommodate τ→μνν with modified Higgs-τ couplings. The anomalous magnetic moment of the muon can be explained if the additional neutral CP-even Higgs boson H is light (below 100 GeV). Also R(D) and R(D^{*}) can be easily explained by additional t-c-Higgs couplings. Combining these t-c couplings with a light H the decay rate for t→Hc can be in a testable range for the LHC. Effects in h→μτ are also possible, but in this case a simultaneous explanation of the anomalous magnetic moment of the muon is difficult due to the unavoidable τ→μγ decay.

Dark Matter signals at the LHC from a 3HDM

Science.gov (United States)

Cordero, A.; Hernandez-Sanchez, J.; Keus, V.; King, S. F.; Moretti, S.; Rojas, D.; Sokolowska, D.

2018-05-01

We analyse new signals of Dark Matter (DM) at the Large Hadron Collider (LHC) in a 3-Higgs Doublet Model (3HDM) where only one doublet acquires a Vacuum Expectation Value (VEV), preserving a parity Z 2. The other two doublets are inert and do not develop a VEV, leading to a dark scalar sector controlled by Z 2, with the lightest CP-even dark scalar H 1 being the DM candidate. This leads to the loop induced decay of the next-to-lightest scalar, {H}_2\\to {H}_1f\\overline{f}(f=u,d,c,s,b,e,μ, τ ) , mediated by both dark CP-odd and charged scalars. This is a smoking-gun signal of the 3HDM since it is not allowed in the 2HDM with one inert doublet and is expected to be important when H 2 and H 1 are close in mass. In practice, this signature can be observed in the cascade decay of the SM-like Higgs boson, h\\to {H}_1{H}_2\\to {H}_1{H}_1f\\overline{f} into two DM particles and di-leptons/di-jets, where h is produced from either gluon-gluon Fusion (ggF) or Vector Boson Fusion (VBF). However, this signal competes with the tree-level channel q\\overline{q}\\to {H}_1{H}_1{Z}^{\\ast}\\to {H}_1{H}_1f\\overline{f} . We devise some benchmarks, compliant with collider, DM and cosmological data, for which the interplay between these modes is discussed. In particular, we show that the resulting detector signature, [InlineMediaObject not available: see fulltext.], with invariant mass of f\\overline{f} much smaller than m Z , can potentially be extracted already during Run 2 and 3. For example, the H 2 → H 1 γ * and γ * → e + e - case will give a spectacular QED mono-shower signal.

Alq3 nanorods: promising building blocks for optical devices.

Science.gov (United States)

Chen, Wei; Peng, Qing; Li, Yadong

2008-07-17

Monodisperse Alq3 nanorods with hexagonal-prism-like morphology are produced via a facile, emulsion based synthesis route. The photoluminescence of individual nanorods differs from the bulk material. These nanorods are promising building blocks for novel optical devices. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

3D Printed Paper-Based Microfluidic Analytical Devices

Directory of Open Access Journals (Sweden)

Yong He

2016-06-01

Full Text Available As a pump-free and lightweight analytical tool, paper-based microfluidic analytical devices (μPADs attract more and more interest. If the flow speed of μPAD can be programmed, the analytical sequences could be designed and they will be more popular. This reports presents a novel μPAD, driven by the capillary force of cellulose powder, printed by a desktop three-dimensional (3D printer, which has some promising features, such as easy fabrication and programmable flow speed. First, a suitable size-scale substrate with open microchannels on its surface is printed. Next, the surface of the substrate is covered with a thin layer of polydimethylsiloxane (PDMS to seal the micro gap caused by 3D printing. Then, the microchannels are filled with a mixture of cellulose powder and deionized water in an appropriate proportion. After drying in an oven at 60 °C for 30 min, it is ready for use. As the different channel depths can be easily printed, which can be used to achieve the programmable capillary flow speed of cellulose powder in the microchannels. A series of microfluidic analytical experiments, including quantitative analysis of nitrite ion and fabrication of T-sensor were used to demonstrate its capability. As the desktop 3D printer (D3DP is very cheap and accessible, this device can be rapidly printed at the test field with a low cost and has a promising potential in the point-of-care (POC system or as a lightweight platform for analytical chemistry.

Gauge invariant Barr-Zee type contributions to fermionic EDMs in the two-Higgs doublet models

International Nuclear Information System (INIS)

Abe, Tomohiro; Hisano, Junji; Kitahara, Teppei; Tobioka, Kohsaku

2014-01-01

We calculate all gauge invariant Barr-Zee type contributions to fermionic electric dipole moments (EDMs) in the two-Higgs doublet models (2HDM) with softly broken Z 2 symmetry. We start by studying the tensor structure of h→VV′ part in the Barr-Zee diagrams, and we calculate the effective couplings in a gauge invariant way by using the pinch technique. Then we calculate all Barr-Zee diagrams relevant for electron and neutron EDMs. We make bounds on the parameter space in type-I, type-II, type-X, and type-Y 2HDMs. The electron and neutron EDMs are complementary to each other in discrimination of the 2HDMs. Type-II and type-X 2HDMs are strongly constrained by recent ACME experiment’s result, and future experiments of electron and neutron EDMs may search O(10) TeV physics

The Nd-Mn exchange interaction, low temperature specific heat and magnetism of Nd{sub 2/3}Ca{sub 1/3}MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Beznosov, Anatoly [B. Verkin Institute for Low Temperature Physics and Engineering NASU, 47 Lenin Avenue, Kharkov 61103 (Ukraine); Fertman, Elena, E-mail: fertman@ilt.kharkov.ua [B. Verkin Institute for Low Temperature Physics and Engineering NASU, 47 Lenin Avenue, Kharkov 61103 (Ukraine); Desnenko, Vladimir [B. Verkin Institute for Low Temperature Physics and Engineering NASU, 47 Lenin Avenue, Kharkov 61103 (Ukraine); Kajnakova, Marcela; Feher, Alexander [Centre of Low Temperature Physics of the Faculty of Science UPJS and IEP SAS, Park Angelinum 9, 04154 Kosice (Slovakia)

2011-10-15

The low temperature specific heat and magnetic characteristics of Nd{sub 2/3}Ca{sub 1/3}MnO{sub 3} perovskite are studied in a wide range of magnetic fields (up to 9 T). Temperature dependent specific heat data show a broadened Schottky-like anomaly below 20 K caused by splitting of the Nd{sup 3+} ions ground-state doublet in the effective molecular field H{sub ex}, determined by exchange interaction between Nd and Mn spin systems supplemented by an applied external magnetic field. Existence of the splitting at zero magnetic field and expressed field dependence is the evidence of a strong exchange coupling between Nd and Mn magnetic subsystems. The Nd-ions magnetic ordering leads to an additional contribution to the magnetic moment of the system below 30 K, producing anomalies of the magnetic loss and field-cooled and zero-field-cooled magnetizations. The observed broadened Schottky-like anomalies are fitted for each applied magnetic field by the sum of three Schottky functions. Applied magnetic field extends the anomaly region and shifts it to higher temperatures. Splitting of the higher crystal field Kramers doublets gives an additional contribution to the heat capacity in magnetic fields. The ground state doublet g-factors g{sub ||} and g{sub perpendicular} were estimated to be 3.4 and 2.2, respectively, and H{sub ex} was estimated to be 9 T. The Nd{sup 3+} ions magnetic moment estimated from the magnetization data agrees with the value obtained from the specific heat data. - Highlights: > Low temperature specific heat of Nd{sub 2/3}Ca{sub 1/3}MnO{sub 3} has been measured in magnetic fields up to 9 T. > Schottky-like anomalies are fitted for each magnetic field by a sum of three Schottky functions. > An effective magnetic field of the Mn spin system on Nd ion has been estimated as H{sub ex}=9 T. > Nd{sup 3+} ground-state g-factors have been estimated as g{sub ||}=3.4 and g{sub perpendicular} =2.2. > Magnetic ordering of the Nd subsystem has been revealed below

Understanding the conductive channel evolution in Na:WO3-x-based planar devices

Science.gov (United States)

Shang, Dashan; Li, Peining; Wang, Tao; Carria, Egidio; Sun, Jirong; Shen, Baogen; Taubner, Thomas; Valov, Ilia; Waser, Rainer; Wuttig, Matthias

2015-03-01

An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO3-x) films on a soda-lime glass substrate, from which Na+ diffuses into the WO3-x films during the deposition. The entire process of Na+ migration driven by an alternating electric field is visualized in the Na-doped WO3-x films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the devices. The peculiar channel evolution is interpreted by a thermal-stress-induced mechanical deformation of the films and an asymmetric Na+ mobility between the parabolic and the bar channels. These results exemplify a typical ion migration process driven by an alternating electric field in a solid electrolyte with a low ion mobility and are expected to be beneficial to improve the controllability of the ion migration in ion-based functional devices, such as resistive switching devices.An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO3-x) films on a soda-lime glass substrate, from which Na+ diffuses into the WO3-x films during the deposition. The entire process of Na+ migration driven by an alternating electric field is visualized in the Na-doped WO3-x films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the

Crystal-field and Nd-Mn exchange interaction in Nd{sub 2/3}Ca{sub 1/3}MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Beznosov, A; Fertman, E; Desnenko, V; Loginov, A [B Verkin Institute for Low Temperature Physics and Engineering, NASU, 47 Lenin Ave., 61103 Kharkov (Ukraine); Feher, A; Kajnakova, M, E-mail: fertman@ilt.kharkov.u [Centre of Low Temperature Physics of the Faculty of Science of P.J. Safarik University and IEP SAS, Park Angelinum 9, SK-04154 Kotice (Slovakia)

2010-01-01

A study of the low field magnetization and specific heat in magnetic fields up to 9 T of Nd{sub 2/3}Ca{sub 1/3}MnO{sub 3} perovskite in the 2-30 K temperature range has been done. All the specific heat data show broadened Schottky-like anomaly below 20 K. We suppose that such a behavior originates from the Nd magnetic ordering caused by the splitting of the Nd{sup 3+} ions ground-state doublet (GSD) in the effective molecular field H{sub ex} of Mn spin system supplemented by an applied external magnetic field. The zero field GSD splitting is an evidence of a strong exchange coupling between Nd and Mn magnetic subsystems. The Nd-ions magnetic ordering introduces an additional contribution to the ferromagnetic moment producing anomalies of the field-cooled and zero-field-cooled magnetizations of the system below 28 K. The broadened Schottky-like anomalies found are fitted for every field by a set of three Schottky functions. Applied magnetic field extends the anomaly region and shifts it to the higher temperatures. Splitting of the higher crystal field Kramers doublets gives an additional contribution to the heat capacity under magnetic fields. The GSD g-factors g{sub ||} and g{sub p}erpendicular was estimated as 3.4 and 2.2, respectively, and H{sub ex} as 9 T.

Improved electron injection into Alq{sub 3} based devices using a thin Erq{sub 3} injection layer

Energy Technology Data Exchange (ETDEWEB)

Shakya, P; Desai, P; Gillin, W P [Department of Physics, Queen Mary, University of London, Mile End Road, London, E1 4NS (United Kingdom); Curry, R J [Advanced Technology Institute, School of Electronics and Physical Sciences, University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom)

2008-04-21

The role of a thin erbium(III) tris(8-hydroxyquinoline) (Erq{sub 3}) interface layer on the electron injection into aluminium(III) tris(8-hydroxyquinoline) (Alq{sub 3}) based organic light emitting devices (OLEDs) has been investigated. It has been shown that the use of a 40 A interface layer can increase the efficiency of a simple Alq{sub 3} OLED with an Al cathode to a level comparable with other, well established, high-efficiency cathodes such as LiF/Al. We also show that, despite the bulk HOMO and LUMO positions for Erq{sub 3} being little different from those for Alq{sub 3}, the presence of an interfacial layer makes the devices turn-on voltage almost independent of the cathode metal. This is explained by there being a vacuum level shift for Erq{sub 3} which is dependent on the work function of the cathode metal.

A very light CP-odd scalar in the Two-Higgs-Doublet Model

CERN Document Server

Larios, F; Yuan, C P; CERN. Geneva

2001-01-01

We show that a general two-Higgs-doublet model (THDM) with a very light CP-odd scalar (A) can be compatible with the rho parameter, Br(b --> s\\gamma), R_b, A_b, (g-2) of muon, Br(Upsilon --> A gamma), and the direct search via the Yukawa process at LEP. For its mass around 0.2 GeV, the muon (g-2) and Br(Upsilon --> A \\gamma) data require tan(beta) to be about 1. Consequently, A can behave like a fermiophobic CP-odd scalar and predominantly decay into a photon pair ("gamma gamma"), which registers in detectors of high energy collider experiments as a single photon signature when the momentum of A is large. We compute the partial decay width of Z --> A A A and the production rate of f \\bar{f} --> Z A A --> Z +"gamma gamma", f^' {\\bar f} --> W^{\\pm} A A --> W^\\pm + "gamma gamma" and f \\bar f --> H^+ H^- --> W^+ W^- A A --> W^+ W^- + "gamma gamma" at high energy colliders such as LEP, Tevatron, LHC, and future Linear Colliders. Other production mechanisms of a light A, such as gg --> h --> AA --> "gamma gamma", a...

A newly developed removable dental device for fused 3-D MRI/Meg imaging

Energy Technology Data Exchange (ETDEWEB)

Kuboki, Takuo [Okayama Univ. (Japan). Dental School; Clark, G T; Akhtari, M; Sutherling, W W

1999-06-01

Recently 3-D imaging techniques have been used to shed light on the role of abnormal brain functions in such conditions as nocturnal bruxism and orofacial pain. In order to achieve precise 3-D image fusion between magnetic resonance images (MRI) and magnetoencephalography (MEG) data, we developed a removable dental device which attaches rigidly to the teeth. Using this device, correlation of MEG and MRI data points was achieved by the co-registration of 3 or more fiducial points. Using a Polhemus 3-space digitizer the locations of the points were registered on MEG and then a small amount of high-water-content material was placed at each point for registering these same points on MRI. The mean reproducibility of interpoint distances, determined for 2 subjects, was between 0.59 and 0.82 mm. Using a Monte Carlo statistical analysis we determined that the accuracy of a posterior projection from the fiducial points to any point within the strata of the brain is {+-}3.3 mm. The value of this device is that it permits reasonably precise and repeatable co-registration of these points and yet it is easily removed and replaced by the patient. Obviously such a device could also be adapted for use in diagnosis and analysis of brain functions related with other various sensory and motor functions (e.g., taste, pain, clenching) in maxillofacial region using MRI and MEG. (author)

A newly developed removable dental device for fused 3-D MRI/Meg imaging

International Nuclear Information System (INIS)

Kuboki, Takuo; Clark, G.T.; Akhtari, M.; Sutherling, W.W.

1999-01-01

Recently 3-D imaging techniques have been used to shed light on the role of abnormal brain functions in such conditions as nocturnal bruxism and orofacial pain. In order to achieve precise 3-D image fusion between magnetic resonance images (MRI) and magnetoencephalography (MEG) data, we developed a removable dental device which attaches rigidly to the teeth. Using this device, correlation of MEG and MRI data points was achieved by the co-registration of 3 or more fiducial points. Using a Polhemus 3-space digitizer the locations of the points were registered on MEG and then a small amount of high-water-content material was placed at each point for registering these same points on MRI. The mean reproducibility of interpoint distances, determined for 2 subjects, was between 0.59 and 0.82 mm. Using a Monte Carlo statistical analysis we determined that the accuracy of a posterior projection from the fiducial points to any point within the strata of the brain is ±3.3 mm. The value of this device is that it permits reasonably precise and repeatable co-registration of these points and yet it is easily removed and replaced by the patient. Obviously such a device could also be adapted for use in diagnosis and analysis of brain functions related with other various sensory and motor functions (e.g., taste, pain, clenching) in maxillofacial region using MRI and MEG. (author)

Mass matrix ansatz and lepton flavor violation in the two-Higgs doublet model-III

International Nuclear Information System (INIS)

Diaz-Cruz, J.L.; Noriega-Papaqui, R.; Rosado, A.

2004-01-01

Predictive Higgs-boson-fermion couplings can be obtained when a specific texture for the fermion mass matrices is included in the general two-Higgs doublet model. We derive the form of these couplings in the charged lepton sector using a Hermitian mass matrix ansatz with four-texture zeros. The presence of unconstrained phases in the vertices φ i l i l j modifies the pattern of flavor-violating Higgs boson interactions. Bounds on the model parameters are obtained from present limits on rare lepton flavor-violating processes, which could be extended further by the search for the decay τ→μμμ and μ-e conversion at future experiments. The signal from Higgs boson decays φ i →τμ could be searched for at the CERN Large Hadron Collider, while e-μ transitions could produce a detectable signal at a future eμ collider, through the reaction e + μ - →h 0 →τ + τ -

Heat flux to the limiter during disruptions and neutral beam injection in Doublet-III

International Nuclear Information System (INIS)

Hino, T.; DeGrassie, J.; Taylor, T.S.; Hopkins, G.; Meyer, C.; Petrie, T.W.; Kahn, C.L.; Ejima, S.

1984-01-01

The heat flux to the Doublet-III primary limiter has been monitored during plasma disruptions and during neutral beam injection. The surface temperature of the movable TiC-coated graphite limiter was measured with an Inframetrics thermal imaging system and a suitably filtered silicon photodiode spot detector. In addition, the floating electric potential of the limiter with respect to the vacuum vessel was measured. The heat pulse duration to the limiter was measured by the spot detector with a time response of x approx.= 10 μs and these times were correlated with the plasma parameters. In limiter discharges, 20% of the plasma kinetic stored energy goes to the limiter during disruptions. The power balance during disruptions is also discussed. During neutral beam injection, the limiter is not heated uniformly; the ion drift side receives much more thermal flux than the electron drift side. The fraction of beam power going to the limiter is as high as approx.= 35% in normal limiter discharges. (orig.)

Leptophilic neutral Higgs bosons in two Higgs doublet model at a linear collider

Energy Technology Data Exchange (ETDEWEB)

Hashemi, Majid [Shiraz University, Physics Department, College of Sciences, Shiraz (Iran, Islamic Republic of)

2017-05-15

This paper addresses the question of the observability of neutral Higgs bosons through the leptonic decay in a two Higgs doublet model (2HDM). Both scalar and pseudo-scalar Higgs bosons (H, A) are considered. The model is set to type IV to enhance the leptonic decay. In such a scenario, a signal production process like e{sup +}e{sup -} → A{sup 0}H{sup 0} → ττμμ or μμττ would provide a clear signal on top of the background in a di-muon invariant mass distribution far from the Z boson pole mass. The analysis is based on a τ-id algorithm which preselects events if they have two τ jets by requiring a hadronic τ decay. Several benchmark points are defined for the search, requiring a linear collider operating at √(s) = 0.5 and 1 TeV. It is shown that the signal can be observed on top of the background in all benchmark points at an integrated luminosity of 1000 fb{sup -1}. (orig.)

Let there be light from a second light Higgs doublet

Science.gov (United States)

Haisch, Ulrich; Malinauskas, Augustinas

2018-03-01

In this article, we demonstrate that the unexpected peak at around 95 GeV as seen recently by CMS in the di-photon final state can be explained within the type-I two-Higgs-doublet model by means of a moderately-to-strongly fermiophobic CP-even Higgs H. Depending on the Higgs mass spectrum, the production of such a H arises dominantly from vector boson fusion or through a cascade in either pp\\to t\\overline{t} with \\overset{(-)}{t}\\to {H}^{±}\\overset{(-)}{b}\\to {W}^{± *}H\\overset{(-)}{b} or pp → A with A → W ∓ H ± → W ∓ W ± H or via pp → W ± ∗ → H ± H. In this context, we also discuss other Higgs anomalies such as the LEP excess in Higgsstrahlung and the observation of enhanced rates in t\\overline{t}h at both the Tevatron and the LHC, showing that parameters capable of explaining the CMS di-photon signal can address the latter deviations as well. The Higgs spectra that we explore comprise masses between 80 GeV and 350 GeV. While at present all constraints from direct and indirect searches for spin-0 resonances can be shown to be satisfied for such light Higgses, future LHC data will be able to probe the parameter space that leads to a simultaneous explanation of the discussed anomalies.

Overview of 3-year experience with large-scale electronic portal imaging device-based 3-dimensional transit dosimetry

NARCIS (Netherlands)

Mijnheer, Ben J.; González, Patrick; Olaciregui-Ruiz, Igor; Rozendaal, Roel A.; van Herk, Marcel; Mans, Anton

2015-01-01

To assess the usefulness of electronic portal imaging device (EPID)-based 3-dimensional (3D) transit dosimetry in a radiation therapy department by analyzing a large set of dose verification results. In our institution, routine in vivo dose verification of all treatments is performed by means of 3D

Precision calculations for h → WW/ZZ → 4 fermions in the Two-Higgs-Doublet Model with Prophecy4f

Science.gov (United States)

Altenkamp, Lukas; Dittmaier, Stefan; Rzehak, Heidi

2018-03-01

We have calculated the next-to-leading-order electroweak and QCD corrections to the decay processes h → WW/ZZ → 4 fermions of the light CP-even Higgs boson h of various types of Two-Higgs-Doublet Models (Types I and II, "lepton-specific" and "flipped" models). The input parameters are defined in four different renormalization schemes, where parameters that are not directly accessible by experiments are defined in the \\overline{MS} scheme. Numerical results are presented for the corrections to partial decay widths for various benchmark scenarios previously motivated in the literature, where we investigate the dependence on the \\overline{MS} renormalization scale and on the choice of the renormalization scheme in detail. We find that it is crucial to be precise with these issues in parameter analyses, since parameter conversions between different schemes can involve sizeable or large corrections, especially in scenarios that are close to experimental exclusion limits or theoretical bounds. It even turns out that some renormalization schemes are not applicable in specific regions of parameter space. Our investigation of differential distributions shows that corrections beyond the Standard Model are mostly constant offsets induced by the mixing between the light and heavy CP-even Higgs bosons, so that differential analyses of h→4 f decay observables do not help to identify Two-Higgs-Doublet Models. Moreover, the decay widths do not significantly depend on the specific type of those models. The calculations are implemented in the public Monte Carlo generator Prophecy4f and ready for application.

Theory of field induced incommensurability: CsFeCl3

DEFF Research Database (Denmark)

Lindgård, Per-Anker

1986-01-01

Using correlation theory for the singlet-doublet magnet CsFeCl3 in a magnetic field, a field induced incommensurate ordering along K-M is predicted without invoking dipolar effects. A fully self-consistent RPA theory gives Hc=44 kG in agreement with experiments at T=1.3K. Correlation and dipolar...

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

International Nuclear Information System (INIS)

Yamanaka, M.; Takeda, Y.; Tanigawa, S.; Nishizawa, A.; Noda, N.

1979-11-01

A twin optically-pumped far-infrared CH 3 OH laser has been constructed for use in plasma diagnostics. The anti-symmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 μm. With the 118.8-μm line, it is obtained from the frequency separation of the anti-symmetric doublet that the CH 3 OH absorption line center is 16 +- 1 MHz higher than the pump 9.7-μm P(36) CO 2 laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described. (author)

Comparisons of switching characteristics between Ti/Al2O3/Pt and TiN/Al2O3/Pt RRAM devices with various compliance currents

Science.gov (United States)

Qi, Yanfei; Zhao, Ce Zhou; Liu, Chenguang; Fang, Yuxiao; He, Jiahuan; Luo, Tian; Yang, Li; Zhao, Chun

2018-04-01

In this study, the influence of the Ti and TiN top electrodes on the switching behaviors of the Al2O3/Pt resistive random access memory devices with various compliance currents (CCs, 1-15 mA) has been compared. Based on the similar statistical results of the resistive switching (RS) parameters such as V set/V reset, R HRS/R LRS (measured at 0.10 V) and resistance ratio with various CCs for both devices, the Ti/Al2O3/Pt device differs from the TiN/Al2O3/Pt device mainly in the forming process rather than in the following switching cycles. Apart from the initial isolated state, the Ti/Al2O3/Pt device has the initial intermediate state as well. In addition, its forming voltage is relatively lower. The conduction mechanisms of the ON and OFF state for both devices are demonstrated as ohmic conduction and Frenkel-Poole emission, respectively. Therefore, with the combined modulations of the CCs and the stop voltages, the TiN/Al2O3/Pt device is more stable for nonvolatile memory applications to further improve the RS performance.

36 CFR 3.13 - What conditions apply to the use of Marine Sanitation Devices (MSD)?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false What conditions apply to the use of Marine Sanitation Devices (MSD)? 3.13 Section 3.13 Parks, Forests, and Public Property NATIONAL... to the use of Marine Sanitation Devices (MSD)? (a) Discharging sewage from any vessel, whether...

3D Printed "Earable" Smart Devices for Real-Time Detection of Core Body Temperature.

Science.gov (United States)

Ota, Hiroki; Chao, Minghan; Gao, Yuji; Wu, Eric; Tai, Li-Chia; Chen, Kevin; Matsuoka, Yasutomo; Iwai, Kosuke; Fahad, Hossain M; Gao, Wei; Nyein, Hnin Yin Yin; Lin, Liwei; Javey, Ali

2017-07-28

Real-time detection of basic physiological parameters such as blood pressure and heart rate is an important target in wearable smart devices for healthcare. Among these, the core body temperature is one of the most important basic medical indicators of fever, insomnia, fatigue, metabolic functionality, and depression. However, traditional wearable temperature sensors are based upon the measurement of skin temperature, which can vary dramatically from the true core body temperature. Here, we demonstrate a three-dimensional (3D) printed wearable "earable" smart device that is designed to be worn on the ear to track core body temperature from the tympanic membrane (i.e., ear drum) based on an infrared sensor. The device is fully integrated with data processing circuits and a wireless module for standalone functionality. Using this smart earable device, we demonstrate that the core body temperature can be accurately monitored regardless of the environment and activity of the user. In addition, a microphone and actuator are also integrated so that the device can also function as a bone conduction hearing aid. Using 3D printing as the fabrication method enables the device to be customized for the wearer for more personalized healthcare. This smart device provides an important advance in realizing personalized health care by enabling real-time monitoring of one of the most important medical parameters, core body temperature, employed in preliminary medical screening tests.

Understanding the conductive channel evolution in Na:WO(3-x)-based planar devices.

Science.gov (United States)

Shang, Dashan; Li, Peining; Wang, Tao; Carria, Egidio; Sun, Jirong; Shen, Baogen; Taubner, Thomas; Valov, Ilia; Waser, Rainer; Wuttig, Matthias

2015-04-14

An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO(3-x)) films on a soda-lime glass substrate, from which Na(+) diffuses into the WO(3-x) films during the deposition. The entire process of Na(+) migration driven by an alternating electric field is visualized in the Na-doped WO(3-x) films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the devices. The peculiar channel evolution is interpreted by a thermal-stress-induced mechanical deformation of the films and an asymmetric Na(+) mobility between the parabolic and the bar channels. These results exemplify a typical ion migration process driven by an alternating electric field in a solid electrolyte with a low ion mobility and are expected to be beneficial to improve the controllability of the ion migration in ion-based functional devices, such as resistive switching devices.

3D-printed devices for continuous-flow organic chemistry.

Science.gov (United States)

Dragone, Vincenza; Sans, Victor; Rosnes, Mali H; Kitson, Philip J; Cronin, Leroy

2013-01-01

We present a study in which the versatility of 3D-printing is combined with the processing advantages of flow chemistry for the synthesis of organic compounds. Robust and inexpensive 3D-printed reactionware devices are easily connected using standard fittings resulting in complex, custom-made flow systems, including multiple reactors in a series with in-line, real-time analysis using an ATR-IR flow cell. As a proof of concept, we utilized two types of organic reactions, imine syntheses and imine reductions, to show how different reactor configurations and substrates give different products.

All-Polymer Photovoltaic Devices of Poly(3-(4- n -octyl)-phenylthiophene) from Grignard Metathesis (GRIM) Polymerization

KAUST Repository

Holcombe, Thomas W.

2009-10-14

(Graph Presented) The synthesis of poly[3-(4-n-octyl)-phenylthiophene] (POPT) from Grignard Metathesis (GRIM) is reported. GRIM POPT is found to have favorable electronic, optical, and processing properties for organic photovoltaics (OPVs). Space-charge limited current and field effect transistor measurements for POPT yielded hole mobilities of 1 × 10-4 cm2/(V s) and 0.05 cm2/(V s), respectively. Spincasting GRIM POPT from chlorobenzene yields a thin film with a 1.8 eV band gap, and PC61BM:POPT bulk heterojection devices provide a peak performance of 3.1%. Additionally, an efficiency of 2.0% is achieved in an all-polymer, bilayer OPV using poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-(1-cyanovinylene) phenylene] (CNPPV) as an acceptor. This state-of-the-art all-polymer device is analyzed in comparison to the analogous poly(3-hexylthiophene) (P3HT)/CNPPV device. Counter to expectations based on more favorable energy level alignment, greater active layer light absorption, and similar hole mobility, P3HT/CNPPV devices perform less well than POPT/CNPPV devices with a peak efficiency of 0.93%. © 2009 American Chemical Society.

All-Polymer Photovoltaic Devices of Poly(3-(4- n -octyl)-phenylthiophene) from Grignard Metathesis (GRIM) Polymerization

KAUST Repository

Holcombe, Thomas W.; Woo, Claire H.; Kavulak, David F.J.; Thompson, Barry C.; Fréchet, Jean M. J.

2009-01-01

(Graph Presented) The synthesis of poly[3-(4-n-octyl)-phenylthiophene] (POPT) from Grignard Metathesis (GRIM) is reported. GRIM POPT is found to have favorable electronic, optical, and processing properties for organic photovoltaics (OPVs). Space-charge limited current and field effect transistor measurements for POPT yielded hole mobilities of 1 × 10-4 cm2/(V s) and 0.05 cm2/(V s), respectively. Spincasting GRIM POPT from chlorobenzene yields a thin film with a 1.8 eV band gap, and PC61BM:POPT bulk heterojection devices provide a peak performance of 3.1%. Additionally, an efficiency of 2.0% is achieved in an all-polymer, bilayer OPV using poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-(1-cyanovinylene) phenylene] (CNPPV) as an acceptor. This state-of-the-art all-polymer device is analyzed in comparison to the analogous poly(3-hexylthiophene) (P3HT)/CNPPV device. Counter to expectations based on more favorable energy level alignment, greater active layer light absorption, and similar hole mobility, P3HT/CNPPV devices perform less well than POPT/CNPPV devices with a peak efficiency of 0.93%. © 2009 American Chemical Society.

Searches for Dark Matter via Mono-W Production in Inert Doublet Model at the LHC

Science.gov (United States)

Wan, Neng; Li, Niu; Zhang, Bo; Yang, Huan; Zhao, Min-Fu; Song, Mao; Li, Gang; Guo, Jian-You

2018-05-01

The Inert Doublet Model (IDM) is one of the many beyond Standard Model scenarios with an extended scalar sector, which provide a suitable dark matter particle candidate. Dark matter associated visible particle production at high energy colliders provides a unique way to determine the microscopic properties of the dark matter particle. In this paper, we investigate that the mono-W + missing transverse energy production at the Large Hadron Collider (LHC), where W boson decay to a lepton and a neutrino. We perform the analysis for the signal of mono-W production in the IDM and the Standard Model (SM) backgrounds, and the optimized criteria employing suitable cuts are chosen in kinematic variables to maximize signal significance. We also investigate the discovery potential in several benchmark scenarios at the 14 TeV LHC. When the light Z2 odd scalar higgs of mass is about 65 GeV, charged Higgs is in the mass range from 120 GeV to 250 GeV, it provides the best possibility with a signal significance of about 3σ at an integrated luminosity of about 3000 fb‑1. Supported by the National Natural Science Foundation of China under Grant Nos. 11205003, 11305001, 11575002, the Key Research Foundation of Education Ministry of Anhui Province of China under Grant Nos. KJ2017A032, KJ2016A749, KJ2013A260, and Natural Science Foundation of West Anhui University under Grant No. WXZR201614

3D Printing device adaptable to Computer Numerical Control (CNC)

OpenAIRE

GARDAN , Julien; Danesi , F.; Roucoules , Lionel; Schneider , A.

2014-01-01

This article presents the development of a 3D printing device for the additive manufacturing adapted to a CNC machining. The application involves the integration of a specific printing head. Additive manufacturing technology is most commonly used for modeling, prototyping, tooling through an exclusive machine or 3D printer. A global review and analysis of technologies show the additive manufacturing presents little independent solutions [6][9]. The problem studied especially the additive manu...

78 FR 55294 - Certain Wireless Devices With 3G Capabilities and Components Thereof Commission Determination To...

Science.gov (United States)

2013-09-10

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-800] Certain Wireless Devices With 3G Capabilities and Components Thereof Commission Determination To Review the Final Initial Determination Finding... importation of certain wireless devices with 3G capabilities and components thereof by reason of infringement...

17 CFR 240.10b-3 - Employment of manipulative and deceptive devices by brokers or dealers.

Science.gov (United States)

2010-04-01

... deceptive devices by brokers or dealers. 240.10b-3 Section 240.10b-3 Commodity and Securities Exchanges... Contrivances § 240.10b-3 Employment of manipulative and deceptive devices by brokers or dealers. (a) It shall be unlawful for any broker or dealer, directly or indirectly, by the use of any means or...

Testing a Novel 3D Printed Radiographic Imaging Device for Use in Forensic Odontology.

Science.gov (United States)

Newcomb, Tara L; Bruhn, Ann M; Giles, Bridget; Garcia, Hector M; Diawara, Norou

2017-01-01

There are specific challenges related to forensic dental radiology and difficulties in aligning X-ray equipment to teeth of interest. Researchers used 3D printing to create a new device, the combined holding and aiming device (CHAD), to address the positioning limitations of current dental X-ray devices. Participants (N = 24) used the CHAD, soft dental wax, and a modified external aiming device (MEAD) to determine device preference, radiographer's efficiency, and technique errors. Each participant exposed six X-rays per device for a total of 432 X-rays scored. A significant difference was found at the 0.05 level between the three devices (p = 0.0015), with the MEAD having the least amount of total errors and soft dental wax taking the least amount of time. Total errors were highest when participants used soft dental wax-both the MEAD and the CHAD performed best overall. Further research in forensic dental radiology and use of holding devices is needed. © 2016 American Academy of Forensic Sciences.

3-D ICs as a Platform for IoT Devices

Science.gov (United States)

2017-03-01

are both naturally reduced in 3-D ICs. I. INTRODUCTION The Internet of Things (IoT) is a novel computing paradigm based on connecting physical devices...cost and high transparency [6]. PET is used as the substrate of p-i-n type solar cells and is compatible with the traditional deposition process of solar ...10 138 3.42 to 3.48 130 to 185 2.6 400 to 1,060memory Solar cells Polyethylene 1 · 1016 0.2 1.58 to 1.64 2 to 2.7 3.9 400 to 1,600Terephthalate (PET

Radiative corrections to the triple Higgs coupling in the inert Higgs doublet model

International Nuclear Information System (INIS)

Arhrib, Abdesslam; Benbrik, Rachid; Falaki, Jaouad El; Jueid, Adil

2015-01-01

We investigate the implication of the recent discovery of a Higgs-like particle in the first phase of the LHC Run 1 on the Inert Higgs Doublet Model (IHDM). The determination of the Higgs couplings to SM particles and its intrinsic properties will get improved during the new LHC Run 2 starting this year. The new LHC Run 2 would also shade some light on the triple Higgs coupling. Such measurement is very important in order to establish the details of the electroweak symmetry breaking mechanism. Given the importance of the Higgs couplings both at the LHC and e + e − Linear Collider machines, accurate theoretical predictions are required. We study the radiative corrections to the triple Higgs coupling hhh and to hZZ, hWW couplings in the context of the IHDM. By combining several theoretical and experimental constraints on parameter space, we show that extra particles might modify the triple Higgs coupling near threshold regions. Finally, we discuss the effect of these corrections on the double Higgs production signal at the e + e − LC and show that they can be rather important.

Tectonic Implication of the 5th March 2005, Doublet Earthquake in Ilan, Taiwan

Directory of Open Access Journals (Sweden)

En-Chao Yeh

2016-01-01

Full Text Available The 5th March 2005 earthquake doublet focal mechanism was determined as strike-slip faulting from Harvard and BATS moment tensor inversion. However, based on first motion polarities, the first shock has a normal focal mechanism (Wu et al. 2008a. This discrepancy has caused a debate over the focal mechanism solution because different focal mechanisms have different tectonic implications. Based on the dislocation determination from Global Position System (GPS measurements, we find this event includes both tensile and strike-slip components. This finding illustrates the reason for the differences in the determined focal mechanisms using two different types of seismic data and analyzing methods. Field mapping and microstructure examination results indicate that the ductile deformation around the study area was characterized by the evolution from transpression to transtension with a predominant strike-slip component, but present-day active structures may be dominated by normal faulting. Thus, the active tensile slip result determined from dislocation modeling strongly suggests that the back arc extension of the Okinawa trough influences the stress state in this region, and changes the major transtension from strike-slip faulting to normal faulting.

Surface acoustic wave devices on AlN/3C–SiC/Si multilayer structures

International Nuclear Information System (INIS)

Lin, Chih-Ming; Lien, Wei-Cheng; Riekkinen, Tommi; Senesky, Debbie G; Pisano, Albert P; Chen, Yung-Yu; Felmetsger, Valery V

2013-01-01

Surface acoustic wave (SAW) propagation characteristics in a multilayer structure including a piezoelectric aluminum nitride (AlN) thin film and an epitaxial cubic silicon carbide (3C–SiC) layer on a silicon (Si) substrate are investigated by theoretical calculation in this work. Alternating current (ac) reactive magnetron sputtering was used to deposit highly c-axis-oriented AlN thin films, showing the full width at half maximum (FWHM) of the rocking curve of 1.36° on epitaxial 3C–SiC layers on Si substrates. In addition, conventional two-port SAW devices were fabricated on the AlN/3C–SiC/Si multilayer structure and SAW propagation properties in the multilayer structure were experimentally investigated. The surface wave in the AlN/3C–SiC/Si multilayer structure exhibits a phase velocity of 5528 m s −1 and an electromechanical coupling coefficient of 0.42%. The results demonstrate the potential of AlN thin films grown on epitaxial 3C–SiC layers to create layered SAW devices with higher phase velocities and larger electromechanical coupling coefficients than SAW devices on an AlN/Si multilayer structure. Moreover, the FWHM values of rocking curves of the AlN thin film and 3C–SiC layer remained constant after annealing for 500 h at 540 °C in air atmosphere. Accordingly, the layered SAW devices based on AlN thin films and 3C–SiC layers are applicable to timing and sensing applications in harsh environments. (paper)

Interference contributions to gluon initiated heavy Higgs production in the Two-Higgs-Doublet Model

International Nuclear Information System (INIS)

Greiner, Nicolas

2016-03-01

We discuss the production of a heavy neutral Higgs boson of a CP-conserving Two-Higgs-Doublet Model in gluon fusion and its decay into a four-fermion final state, gg(→VV)→e + e - π + π - /e + e - ν l anti ν l . We investigate the interference contributions to invariant mass distributions of the four-fermion final state and other relevant kinematical observables. The relative importance of the different contributions is quantified for the process in the on-shell approximation, gg→ZZ. We show that interferences of the heavy Higgs with the light Higgs boson and background contributions are essential for a correct description of the differential cross section. Even though they contribute below O(10%) to those heavy Higgs signal cross sections, to which the experiments at the Large Hadron Collider were sensitive in its first run, we find that they are sizeable in certain regions of the parameter space that are relevant for future heavy Higgs boson searches. In fact, the interference contributions can significantly enhance the experimental sensitivity to the heavy Higgs boson.

Status of the Inert Doublet Model and the role of multileptons at the LHC

Energy Technology Data Exchange (ETDEWEB)

Gustafsson, Michael [Univ. Libre de Bruxelles (Belgium). Service de Physique Theorique; Rydbeck, Sara [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Lopez-Honorez, Laura [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); Lundstroem, Erik [AlbaNova Univ., Stockholm (Sweden). The Oskar Klein Centre

2012-06-15

A possible feature of the Inert Doublet Model (IDM) is to provide a dark matter candidate together with an alteration of both direct and indirect collider constraints that allow for a heavy Higgs boson. We study the IDM in light of recent results from Higgs searches at the Large Hadron Collider (LHC) in combination with dark matter direct-detection limits from the XENON experiment. We ask under what conditions the IDM can still accommodate a heavy Higgs boson. We find that IDM scenarios with a Higgs boson in the mass range 160 to 600 GeV are ruled out only when all experimental constraints are combined. For models explaining only a fraction of the DM the limits are weakened, and IDMs with a heavy Higgs are allowed. We discuss the prospects for future detection of such IDM scenarios in the four-lepton plus missing energy channel at the LHC. This signal can show up in the first year of running at {radical}(s)=14 TeV, and we present detector-level studies for a few benchmark models. (orig.)

Ionically conducting Er3+-doped DNA-based biomembranes for electrochromic devices

International Nuclear Information System (INIS)

Leones, R.; Fernandes, M.; Sentanin, F.; Cesarino, I.; Lima, J.F.; Zea Bermudez, V. de; Pawlicka, A.; Magon, C.J.; Donoso, J.P.; Silva, M.M.

2014-01-01

Biopolymer-based membranes have particular interest due to their biocompatibility, Biodegradability, easy extraction from natural resources and low cost. The incorporation of Er 3+ ions into natural macromolecule hosts with the purpose of producing highly efficient emitting phosphors is of widespread interest in materials science, due to their important roles in display devices. Thus, biomembranes may be viewed as innovative materials for the area of optics. This paper describes studies of luminescent material DNA-based membranes doped with erbium triflate and demonstrates that their potential technological applications may be expanded to electrochromic devices. The sample that exhibits the highest ionic conductivity is DNA 10 Er, (1.17 × 10 −5 and 7.76 × 10 −4 S.cm −1 at 30 and 100 °C, respectively). DSC, XRD and POM showed that the inclusion of the guest salt into DNA does not change significantly its amorphous nature. The overall redox stability was ca. 2.0 V indicating that these materials have an acceptable stability window for applications in solid state electrochemical devices. The EPR analysis suggested that the Er 3+ ions are distributed in various environments. A small ECD comprising a Er 3+ -doped DNA-based membrane was assembled and tested by cyclic voltammetry and chronoamperometry. These electrochemical analyses revealed a pale blue color to transparent color change and a decrease of the charge density from -4.0 to -1.2 mC.cm −2 during 4000 color/bleaching cycles

[Performance dependence of organic light-emitting devices on the thickness of Alq3 emitting layer].

Science.gov (United States)

Lian, Jia-rong; Liao, Qiao-sheng; Yang, Rui-bo; Zheng, Wei; Zeng, Peng-ju

2010-10-01

The dependence of opto-electronical characteristics in organic light-emitting devices on the thickness of Alq3 emitter layer was studied, where MoO3, NPB, and Alq3 were used as hole injector, hole transporter, and emitter/electron transporter, respectively. By increasing the thickness of Alq3 layer from 20 to 100 nm, the device current decreased gradually, and the EL spectra of devices performed a little red shift with an obvious broadening in long wavelength range but a little decrease in intensity of short wavelength range. The authors simulated the EL spectra using the photoluminescence (PL) spectra of Alq3 as Alq3 intrinsic emission, which coincided with the experimental EL spectra well. The simulated results suggested that the effect of interference takes the major role in broadening the long wavelength range of EL spectra, and the distribution of emission zone largely affects the profile of EL spectra in short wavelength range.

3D printing of a wearable personalized oral delivery device: A first-in-human study

Science.gov (United States)

Brambilla, Davide

2018-01-01

Despite the burgeoning interest in three-dimensional (3D) printing for the manufacture of customizable oral dosage formulations, a U.S. Food and Drug Administration–approved tablet notwithstanding, the full potential of 3D printing in pharmaceutical sciences has not been realized. In particular, 3D-printed drug-eluting devices offer the possibility for personalization in terms of shape, size, and architecture, but their clinical applications have remained relatively unexplored. We used 3D printing to manufacture a tailored oral drug delivery device with customizable design and tunable release rates in the form of a mouthguard and, subsequently, evaluated the performance of this system in the native setting in a first-in-human study. Our proof-of-concept work demonstrates the immense potential of 3D printing as a platform for the development and translation of next-generation drug delivery devices for personalized therapy. PMID:29750201

Customizable 3D Printed 'Plug and Play' Millifluidic Devices for Programmable Fluidics.

Science.gov (United States)

Tsuda, Soichiro; Jaffery, Hussain; Doran, David; Hezwani, Mohammad; Robbins, Phillip J; Yoshida, Mari; Cronin, Leroy

2015-01-01

Three dimensional (3D) printing is actively sought after in recent years as a promising novel technology to construct complex objects, which scope spans from nano- to over millimeter scale. Previously we utilized Fused deposition modeling (FDM)-based 3D printer to construct complex 3D chemical fluidic systems, and here we demonstrate the construction of 3D milli-fluidic structures for programmable liquid handling and control of biological samples. Basic fluidic operation devices, such as water-in-oil (W/O) droplet generators for producing compartmentalized mono-disperse droplets, sensor-integrated chamber for online monitoring of cellular growth, are presented. In addition, chemical surface treatment techniques are used to construct valve-based flow selector for liquid flow control and inter-connectable modular devices for networking fluidic parts. As such this work paves the way for complex operations, such as mixing, flow control, and monitoring of reaction / cell culture progress can be carried out by constructing both passive and active components in 3D printed structures, which designs can be shared online so that anyone with 3D printers can reproduce them by themselves.

Enhancement of photocurrent extraction and electron injection in dual-functional CH3NH3PbBr3 perovskite-based optoelectronic devices via interfacial engineering

Science.gov (United States)

Tsai, Chia-Lung; Lu, Yi-Chen; Hsiung Chang, Sheng

2018-07-01

Photocurrent extraction and electron injection in CH3NH3PbBr3 (MAPbBr3) perovskite-based optoelectronic devices are both significantly increased by improving the contact at the PCBM/MAPbBr3 interface with an extended solvent annealing (ESA) process. Photoluminescence quenching and x-ray diffraction experiments show that the ESA not only improves the contact at the PCBM/MAPbBr3 interface but also increases the crystallinity of the MAPbBr3 thin films. The optimized dual-functional PCBM-MAPbBr3 heterojunction based optoelectronic device has a high power conversion efficiency of 4.08% and a bright visible luminescence of 1509 cd m‑2. In addition, the modulation speed of the MAPbBr3 based light-emitting diodes is larger than 14 MHz, which indicates that the defect density in the MAPbBr3 thin film can be effectively reduced by using the ESA process.

Encapsulation of a [Dy(OH2)8](3+) cation: magneto-optical and theoretical studies of a caged, emissive SMM.

Science.gov (United States)

Al Hareri, M; Gavey, E L; Regier, J; Ras Ali, Z; Carlos, L D; Ferreira, R A S; Pilkington, M

2016-10-15

The first supramolecular cage formed by three benzo-15-crown-5 macrocycles encapsulating a [Dy(OH2)8](3+) guest cation is reported, with the Dy(iii) centre exhibiting local pseudo square antiprismatic D4d symmetry. The anisotropy barrier extracted from ac susceptibility studies, emission spectroscopy and ab initio calculations reveals that the second excited state Kramers doublet plays a key role in the magnetization dynamics due to the Ising character and near coparallel nature of the ground and first excited Kramers doublets.

3D-printed devices for continuous-flow organic chemistry

Directory of Open Access Journals (Sweden)

Vincenza Dragone

2013-05-01

Full Text Available We present a study in which the versatility of 3D-printing is combined with the processing advantages of flow chemistry for the synthesis of organic compounds. Robust and inexpensive 3D-printed reactionware devices are easily connected using standard fittings resulting in complex, custom-made flow systems, including multiple reactors in a series with in-line, real-time analysis using an ATR-IR flow cell. As a proof of concept, we utilized two types of organic reactions, imine syntheses and imine reductions, to show how different reactor configurations and substrates give different products.

Development of a calibration system for airborne "1"3"1I monitoring devices

International Nuclear Information System (INIS)

Zhao, C.; Tang, F.; He, L.; Xu, Y.; Lu, X.

2016-01-01

A prototype calibration system for airborne "1"3"1I monitoring devices was developed at the Shanghai Institute of Measurement and Testing Technology (SIMT). This system consists of a gaseous "1"3"1I_2 generator, an airborne storage chamber, an airborne iodine sampler, and an HPGe spectrometer. With this system, "1"3"1I reference samples in the form of charcoal filters and charcoal cartridges, with activities ranging from 100 to 10,000 Bq, were produced with overall relative standard uncertainties of 2.8% (for filter samples) and 3.5% (for cartridge samples); the activities range could be extended according to need. - Highlights: • Original calibration system for airborne "1"3"1I monitoring devices was developed. • Two types of "1"3"1I reference samples was prepared. • The activity of the produced "1"3"1I reference sample could be easily controlled. • The influence of uneven distribution of "1"3"1I in cartridge samples was considered.

Towards fabrication of 3D printed medical devices to prevent biofilm formation

DEFF Research Database (Denmark)

Sandler, Niklas; Salmela, Ida; Fallarero, Adyary

2014-01-01

The use of three-dimensional (3D) printing technologies is transforming the way that materials are turned into functional devices. We demonstrate in the current study the incorporation of anti-microbial nitrofurantoin in a polymer carrier material and subsequent 3D printing of a model structure...

3D printing for health & wealth: Fabrication of custom-made medical devices through additive manufacturing

Science.gov (United States)

Colpani, Alessandro; Fiorentino, Antonio; Ceretti, Elisabetta

2018-05-01

Additive Manufacturing (AM) differs from traditional manufacturing technologies by its ability to handle complex shapes with great design flexibility. These features make the technique suitable to fabricate customized components, particularly answering specific custom needs. Although AM mainly referred to prototyping, nowadays the interest in direct manufacturing of actual parts is growing. This article shows the application of AM within the project 3DP-4H&W (3D Printing for Health & Wealth) which involves engineers and physicians for developing pediatric custom-made medical devices to enhance the fulfilling of the patients specific needs. In the project, two types of devices made of a two-component biocompatible silicone are considered. The first application (dental field) consists in a device for cleft lip and palate. The second one (audiological field) consists in an acoustic prosthesis. The geometries of the devices are based on the anatomy of the patient that is obtained through a 3D body scan process. For both devices, two different approaches were planned, namely direct AM and indirect Rapid Tooling (RT). In particular, direct AM consists in the FDM processing of silicone, while RT consists in molds FDM fabrication followed by silicone casting. This paper presents the results of the RT method that is articulated in different phases: the acquisition of the geometry to be realized, the design of the molds taking into account the casting feasibility (as casting channel, vents, part extraction), the realization of molds produced through AM, molds surface chemical finishing, pouring and curing of the silicone. The fabricated devices were evaluated by the physicians team that confirmed the effectiveness of the proposed procedure in fabricating the desired devices. Moreover, the procedure can be used as a general method to extend the range of applications to any custom-made device for anatomic districts, especially where complex shapes are present (as tracheal or

Fabrication, electrical characterization and device simulation of vertical P3HT field-effect transistors

Directory of Open Access Journals (Sweden)

Bojian Xu

2017-12-01

Full Text Available Vertical organic field-effect transistors (VOFETs provide an advantage over lateral ones with respect to the possibility to conveniently reduce the channel length. This is beneficial for increasing both the cut-off frequency and current density in organic field-effect transistor devices. We prepared P3HT (poly[3-hexylthiophene-2,5-diyl] VOFETs with a surrounding gate electrode and gate dielectric around the vertical P3HT pillar junction. Measured output and transfer characteristics do not show a distinct gate effect, in contrast to device simulations. By introducing in the simulations an edge layer with a strongly reduced charge mobility, the gate effect is significantly reduced. We therefore propose that a damaged layer at the P3HT/dielectric interface could be the reason for the strong suppression of the gate effect. We also simulated how the gate effect depends on the device parameters. A smaller pillar diameter and a larger gate electrode-dielectric overlap both lead to better gate control. Our findings thus provide important design parameters for future VOFETs.

Design and fabrication of directional diffractive device on glass substrate for multiview holographic 3D display

Science.gov (United States)

Su, Yanfeng; Cai, Zhijian; Liu, Quan; Zou, Wenlong; Guo, Peiliang; Wu, Jianhong

2018-01-01

Multiview holographic 3D display based on the nano-grating patterned directional diffractive device can provide 3D images with high resolution and wide viewing angle, which has attracted considerable attention. However, the current directional diffractive device fabricated on the photoresist is vulnerable to damage, which will lead to the short service life of the device. In this paper, we propose a directional diffractive device on glass substrate to increase its service life. In the design process, the period and the orientation of the nano-grating at each pixel are carefully calculated accordingly by the predefined position of the viewing zone, and the groove parameters are designed by analyzing the diffraction efficiency of the nano-grating pixel on glass substrate. In the experiment, a 4-view photoresist directional diffractive device with a full coverage of pixelated nano-grating arrays is efficiently fabricated by using an ultraviolet continuously variable spatial frequency lithography system, and then the nano-grating patterns on the photoresist are transferred to the glass substrate by combining the ion beam etching and the reactive ion beam etching for controlling the groove parameters precisely. The properties of the etched glass device are measured under the illumination of a collimated laser beam with a wavelength of 532nm. The experimental results demonstrate that the light utilization efficiency is improved and optimized in comparison with the photoresist device. Furthermore, the fabricated device on glass substrate is easier to be replicated and of better durability and practicability, which shows great potential in the commercial applications of 3D display terminal.

3D printing and milling a real-time PCR device for infectious disease diagnostics.

Science.gov (United States)

Mulberry, Geoffrey; White, Kevin A; Vaidya, Manjusha; Sugaya, Kiminobu; Kim, Brian N

2017-01-01

Diagnosing infectious diseases using quantitative polymerase chain reaction (qPCR) offers a conclusive result in determining the infection, the strain or type of pathogen, and the level of infection. However, due to the high-cost instrumentation involved and the complexity in maintenance, it is rarely used in the field to make a quick turnaround diagnosis. In order to provide a higher level of accessibility than current qPCR devices, a set of 3D manufacturing methods is explored as a possible option to fabricate a low-cost and portable qPCR device. The key advantage of this approach is the ability to upload the digital format of the design files on the internet for wide distribution so that people at any location can simply download and feed into their 3D printers for quick manufacturing. The material and design are carefully selected to minimize the number of custom parts that depend on advanced manufacturing processes which lower accessibility. The presented 3D manufactured qPCR device is tested with 20-μL samples that contain various concentrations of lentivirus, the same type as HIV. A reverse-transcription step is a part of the device's operation, which takes place prior to the qPCR step to reverse transcribe the target RNA from the lentivirus into complementary DNA (cDNA). This is immediately followed by qPCR which quantifies the target sequence molecules in the sample during the PCR amplification process. The entire process of thermal control and time-coordinated fluorescence reading is automated by closed-loop feedback and a microcontroller. The resulting device is portable and battery-operated, with a size of 12 × 7 × 6 cm3 and mass of only 214 g. By uploading and sharing the design files online, the presented low-cost qPCR device may provide easier access to a robust diagnosis protocol for various infectious diseases, such as HIV and malaria.

78 FR 8191 - Certain Wireless Devices With 3G and/or 4G Capabilities and Components Thereof; Institution of...

Science.gov (United States)

2013-02-05

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-868] Certain Wireless Devices With 3G and... importation, and the sale within the United States after importation of certain wireless devices with 3G and... devices with 3G and/or 4G capabilities and components thereof by reason of infringement of one or more of...

3D analysis of semiconductor devices: A combination of 3D imaging and 3D elemental analysis

Science.gov (United States)

Fu, Bianzhu; Gribelyuk, Michael A.

2018-04-01

3D analysis of semiconductor devices using a combination of scanning transmission electron microscopy (STEM) Z-contrast tomography and energy dispersive spectroscopy (EDS) elemental tomography is presented. 3D STEM Z-contrast tomography is useful in revealing the depth information of the sample. However, it suffers from contrast problems between materials with similar atomic numbers. Examples of EDS elemental tomography are presented using an automated EDS tomography system with batch data processing, which greatly reduces the data collection and processing time. 3D EDS elemental tomography reveals more in-depth information about the defect origin in semiconductor failure analysis. The influence of detector shadowing and X-rays absorption on the EDS tomography's result is also discussed.

Using computed tomography and 3D printing to construct custom prosthetics attachments and devices.

Science.gov (United States)

Liacouras, Peter C; Sahajwalla, Divya; Beachler, Mark D; Sleeman, Todd; Ho, Vincent B; Lichtenberger, John P

2017-01-01

The prosthetic devices the military uses to restore function and mobility to our wounded warriors are highly advanced, and in many instances not publically available. There is considerable research aimed at this population of young patients who are extremely active and desire to take part in numerous complex activities. While prosthetists design and manufacture numerous devices with standard materials and limb assemblies, patients often require individualized prosthetic design and/or modifications to enable them to participate fully in complex activities. Prosthetists and engineers perform research and implement digitally designs in collaboration to generate equipment for their patient's rehabilitation needs. 3D printing allows for these devices to be manufactured from an array of materials ranging from plastic to titanium alloy. Many designs require form fitting to a prosthetic socket or a complex surface geometry. Specialty items can be scanned using computed tomography and digitally reconstructed to produce a virtual 3D model the engineer can use to design the necessary features of the desired prosthetic, device, or attachment. Completed devices are tested for fit and function. Numerous custom prostheses and attachments have been successfully translated from the research domain to clinical reality, in particular, those that feature the use of computed tomography (CT) reconstructions. The purpose of this project is to describe the research pathways to implementation for the following clinical designs: sets of bilateral hockey skates; custom weightlifting prosthetic hands; and a wine glass holder. This article will demonstrate how to incorporate CT imaging and 3D printing in the design and manufacturing process of custom attachments and assistive technology devices. Even though some of these prosthesis attachments may be relatively simple in design to an engineer, they have an enormous impact on the lives of our wounded warriors.

A power device material of corundum-structured α-Ga2O3 fabricated by MIST EPITAXY® technique

Science.gov (United States)

Kaneko, Kentaro; Fujita, Shizuo; Hitora, Toshimi

2018-02-01

Corundum-structured oxides have been attracting much attention as next-generation power device materials. A corundum-structured α-Ga2O3 successfully demonstrated power device operations of Schottky barrier diodes (SBDs) with the lowest on-resistance of 0.1 mΩ cm2. The SBDs as a mounting device of TO220 also showed low switching-loss properties with a capacitance of 130 pF. Moreover, the thermal resistance was 13.9 °C/W, which is comparable to that of the SiC TO220 device (12.5 °C/W). On the other hand, corundum-structured α-(Rh,Ga)2O3 showed p-type conductivity, which was confirmed by Hall effect measurements. The Hall coefficient, carrier density, and mobility were 8.22 cm3/C, 7.6 × 1017/cm3, and 1.0 cm2 V-1 s-1, respectively. These values were acceptable for the p-type layer of pn diodes based on α-Ga2O3.

An inorganic electroluminescent device using calcium phosphate doped with Eu{sup 3+} as the luminescent layer

Energy Technology Data Exchange (ETDEWEB)

Koide, Takuhiro [Department of Chemistry and Chemical Engineering, Yamagata University, 4-3-16 Jonan, Yonezawa-shi, Yamagata 992-8510 (Japan); Ito, Michimasa [Tokai Rika Co. Ltd., 3-260 Toyota, Oguchi-cho, Niwa-gun, Aichi 480-0195 (Japan); Kawai, Takahiro [Department of Biochemical Engineering, Yamagata University, 4-3-16 Jonan, Yonezawa-shi, Yamagata 992-8510 (Japan); Matsushima, Yuta, E-mail: ymatsush@yz.yamagata-u.ac.jp [Department of Chemistry and Chemical Engineering, Yamagata University, 4-3-16 Jonan, Yonezawa-shi, Yamagata 992-8510 (Japan)

2013-03-20

Highlights: ► A thin film electroluminescent device was fabricated with a calcium phosphate as the light emitting layer. ► The light emitting layer was formed on the BaTiO{sub 3} disk by a spray pyrolysis method. ► Among the examined calcium phosphates, β-Ca{sub 3}(PO{sub 4}){sub 2}:Eu{sup 3+} showed the best photo- and electroluminescent properties. -- Abstract: In this work, the availability of calcium phosphates for the light emitting layer of a thin-film electroluminescent (TFEL) device was investigated. The goal of this work was to develop an electronic device with ordinary materials such as a calcium phosphate, the principal ingredient of the skeleton of the vertebrate. Compositions of 2CaO·P{sub 2}O{sub 5} (Ca{sub 2}P{sub 2}O{sub 7}), 3CaO·P{sub 2}O{sub 5} (Ca{sub 3}(PO{sub 4}){sub 2}) and 4CaO·P{sub 2}O{sub 5} (Ca{sub 4}O(PO{sub 4}){sub 2}) were examined as the candidates for the light emitting layer. Before composing the TFEL device, the photoluminescence (PL) properties of the three compositions were investigated in the powder form to evaluate the performance as the light emitting layer. Among the examined calcium phosphates, Eu-doped β-Ca{sub 3}(PO{sub 4}){sub 2} showed the best PL properties. It showed typical red-emission from Eu{sup 3+}. The PL intensity was enhanced with the heat-treatment temperature and the optimal temperature was 1250 °C. Then, a TFEL device was prepared by a spray pyrolysis method with the β-Ca{sub 3}(PO{sub 4}){sub 2}:Eu{sup 3+} phosphor layer on a BaTiO{sub 3} disk. The TFEL device exhibited the red emission originating in Eu{sup 3+} at 610 nm under applying alternating voltage. Different from the power sample, the intensity of EL decreased with the heat-treatment temperature from 1000 to 1250 °C. The deterioration of EL at the higher temperatures was attributed to chemical interaction between the phosphor layer and the BaTiO{sub 3} disk.

Customizable 3D Printed 'Plug and Play' Millifluidic Devices for Programmable Fluidics.

Directory of Open Access Journals (Sweden)

Soichiro Tsuda

Full Text Available Three dimensional (3D printing is actively sought after in recent years as a promising novel technology to construct complex objects, which scope spans from nano- to over millimeter scale. Previously we utilized Fused deposition modeling (FDM-based 3D printer to construct complex 3D chemical fluidic systems, and here we demonstrate the construction of 3D milli-fluidic structures for programmable liquid handling and control of biological samples. Basic fluidic operation devices, such as water-in-oil (W/O droplet generators for producing compartmentalized mono-disperse droplets, sensor-integrated chamber for online monitoring of cellular growth, are presented. In addition, chemical surface treatment techniques are used to construct valve-based flow selector for liquid flow control and inter-connectable modular devices for networking fluidic parts. As such this work paves the way for complex operations, such as mixing, flow control, and monitoring of reaction / cell culture progress can be carried out by constructing both passive and active components in 3D printed structures, which designs can be shared online so that anyone with 3D printers can reproduce them by themselves.

Two-loop corrections to the ρ parameter in Two-Higgs-Doublet models

Energy Technology Data Exchange (ETDEWEB)

Hessenberger, Stephan; Hollik, Wolfgang [Max-Planck-Institut fuer Physik (Werner-Heisenberg-Institut), Muenchen (Germany)

2017-03-15

Models with two scalar doublets are among the simplest extensions of the Standard Model which fulfill the relation ρ = 1 at lowest order for the ρ parameter as favored by experimental data for electroweak observables allowing only small deviations from unity. Such small deviations Δρ originate exclusively from quantum effects with special sensitivity to mass splittings between different isospin components of fermions and scalars. In this paper the dominant two-loop electroweak corrections to Δρ are calculated in the CP-conserving THDM, resulting from the top-Yukawa coupling and the self-couplings of the Higgs bosons in the gauge-less limit. The on-shell renormalization scheme is applied. With the assumption that one of the CP-even neutral scalars represents the scalar boson observed by the LHC experiments, with standard properties, the two-loop non-standard contributions in Δρ can be separated from the standard ones. These contributions are of particular interest since they increase with mass splittings between non-standard Higgs bosons and can be additionally enhanced by tanβ and λ{sub 5}, an additional free coefficient of the Higgs potential, and can thus modify the one-loop result substantially. Numerical results are given for the dependence on the various non-standard parameters, and the influence on the calculation of electroweak precision observables is discussed. (orig.)

Phenomenology of U(1){sub F} extension of inert-doublet model with exotic scalars and leptons

Energy Technology Data Exchange (ETDEWEB)

Dhargyal, Lobsang [Harish-Chandra Research Institute, HBNI, Allahabad (India)

2018-02-15

In this work we will extend the inert-doublet model (IDM) by adding a new U(1){sub F} gauge symmetry to it, under which, a Z{sub 2} even scalar (φ{sub 2}) and Z{sub 2} odd right handed component of two exotic charged leptons (F{sub eR}, F{sub μR}), are charged. We also add one Z{sub 2} even real scalar (φ{sub 1}) and one complex scalar (φ), three neutral Majorana right handed fermions (N{sub 1}, N{sub 2}, N{sub 3}), two left handed components of the exotic charged leptons (F{sub eL}, F{sub μL}) as well as F{sub τ} are all odd under the Z{sub 2}, all of which are not charged under the U(1){sub F}. With these new particles added to the IDM, we have a model which can give two scalar DM candidates, together they can explain the present DM relic density as well as the muon (g-2) anomaly simultaneously. Also in this model the neutrino masses are generated at one loop level. One of the most peculiar feature of this model is that non-trivial solution to the axial gauge anomaly free conditions lead to the prediction of a stable very heavy partner to the electron (F{sub e}), whose present collider limit (13 TeV LHC) on its mass should be around m{sub F{sub e}} ≥ few TeV. (orig.)

Preparation and characterization of electroluminescent devices based on complexes of β-diketonates of Tb3+, Eu3+, Gd3+ ions with macrocyclic ligands and UO22+ films

International Nuclear Information System (INIS)

Gibelli, Edison Bessa

2010-01-01

Complexes containing Rare Earth ions are of great interest in the manufacture of electro luminescent devices as organic light emitting devices (OLED). These devices, using rare earth trivalent ions (TR 3+ ) as emitting centers, show high luminescence with extremely fine spectral bands due to the structure of their energy levels, long life time and high quantum efficiency. This work reports the preparation of Rare Earth β-diketonate complexes (Tb 3+ , Eu 3+ and Gd 3+ ) and (tta - thenoyltrifluoroacetonate and acac - acetylacetonate) containing a ligand macrocyclic crown ether (DB18C6 - dibenzo18coroa6) and polymer films of UO 2 2+ . The materials were characterized by complexometric titration with EDTA, CH elemental analysis, near infrared absorption spectroscopy, thermal analysis, X-ray diffraction (powder method) and luminescence spectroscopy. For manufacturing the OLED it was used the technique of deposition of thin films by physical vapor (PVD, Physical Vapor Deposition). (author)

A COUPLED CHEMISTRY-EMISSION MODEL FOR ATOMIC OXYGEN GREEN AND RED-DOUBLET EMISSIONS IN THE COMET C/1996 B2 HYAKUTAKE

International Nuclear Information System (INIS)

Bhardwaj, Anil; Raghuram, Susarla

2012-01-01

The green (5577 Å) and red-doublet (6300, 6364 Å) lines are prompt emissions of metastable oxygen atoms in the 1 S and 1 D states, respectively, that have been observed in several comets. The value of the intensity ratio of green to red-doublet (G/R ratio) of 0.1 has been used as a benchmark to identify the parent molecule of oxygen lines as H 2 O. A coupled chemistry-emission model is developed to study the production and loss mechanisms of the O( 1 S) and O( 1 D) atoms and the generation of red and green lines in the coma of C/1996 B2 Hyakutake. The G/R ratio depends not only on photochemistry, but also on the projected area observed for cometary coma, which is a function of the dimension of the slit used and the geocentric distance of the comet. Calculations show that the contribution of photodissociation of H 2 O to the green (red) line emission is 30%-70% (60%-90%), while CO 2 and CO are the next potential sources contributing 25%-50% ( 1 S) to O( 1 D) would be around 0.03 (±0.01) if H 2 O is the main source of oxygen lines, whereas it is ∼0.6 if the parent is CO 2 . Our calculations suggest that the yield of O( 1 S) production in the photodissociation of H 2 O cannot be larger than 1%. The model-calculated radial brightness profiles of the red and green lines and G/R ratios are in good agreement with the observations made on the comet Hyakutake in 1996 March.

Surface Temperature Measurements from a Stator Vane Doublet in a Turbine Engine Afterburner Flame Using a YAG:Tm Thermographic Phosphor

Science.gov (United States)

Eldridge, J. I.; Walker, D. G.; Gollub, S. L.; Jenkins, T. P.; Allison, S. W.

2015-01-01

Luminescence-based surface temperature measurements were obtained from a YAG:Tm-coated stator vane doublet exposed to the afterburner flame of a J85 test engine at University of Tennessee Space Institute (UTSI). The objective of the testing was to demonstrate that reliable surface temperatures based on luminescence decay of a thermographic phosphor producing short-wavelength emission could be obtained from the surface of an actual engine component in a high gas velocity, highly radiative afterburner flame environment. YAG:Tm was selected as the thermographic phosphor for its blue emission at 456 nm (1D23F4 transition) and UV emission at 365 nm (1D23H6 transition) because background thermal radiation is lower at these wavelengths, which are shorter than those of many previously used thermographic phosphors. Luminescence decay measurements were acquired using a probe designed to operate in the afterburner flame environment. The probe was mounted on the sidewall of a high-pressure turbine vane doublet from a Honeywell TECH7000 turbine engine coated with a standard electron-beam physical vapor deposited (EB-PVD) 200-m-thick TBC composed of yttria-stabilized zirconia (YSZ) onto which a 25-m-thick YAG:Tm thermographic phosphor layer was deposited by solution precursor plasma spray (SPPS). Spot temperature measurements were obtained by measuring luminescence decay times at different afterburner power settings and then converting decay time to temperature via calibration curves. Temperature measurements using the decays of the 456 and 365 nm emissions are compared. While successful afterburner environment measurements were obtained to about 1300C with the 456 nm emission, successful temperature measurements using the 365 nm emission were limited to about 1100C due to interference by autofluorescence of probe optics at short decay times.

76 FR 81527 - Certain Wireless Devices with 3G Capabilities and Components Thereof; Determination Not to Review...

Science.gov (United States)

2011-12-28

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-800] Certain Wireless Devices with 3G Capabilities and Components Thereof; Determination Not to Review Initial Determination Granting Motion for... importation, and the sale within the United States after importation of certain wireless devices with 3G...

78 FR 42107 - Certain Wireless Devices With 3G Capabilities and Components Thereof; Notice of Request for...

Science.gov (United States)

2013-07-15

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-800] Certain Wireless Devices With 3G Capabilities and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U.S..., specifically a limited exclusion order against certain wireless devices with 3G capabilities and components...

77 FR 26788 - Certain Wireless Devices With 3G Capabilities and Components Thereof Determination Not To Review...

Science.gov (United States)

2012-05-07

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-800] Certain Wireless Devices With 3G Capabilities and Components Thereof Determination Not To Review Initial Determination To Amend the Notice of... importation of certain wireless devices with 3G capabilities and components thereof by reason of infringement...

3D integration of planar crossbar memristive devices with CMOS substrate

International Nuclear Information System (INIS)

Lin, Peng; Pi, Shuang; Xia, Qiangfei

2014-01-01

Planar memristive devices with bottom electrodes embedded into the substrates were integrated on top of CMOS substrates using nanoimprint lithography to implement hybrid circuits with a CMOL-like architecture. The planar geometry eliminated the mechanically and electrically weak parts, such as kinks in the top electrodes in a traditional crossbar structure, and allowed the use of thicker and thus less resistive metal wires as the bottom electrodes. Planar memristive devices integrated with CMOS have demonstrated much lower programing voltages and excellent switching uniformity. With the inclusion of the Moiré pattern, the integration process has sub-20 nm alignment accuracy, opening opportunities for 3D hybrid circuits in applications in the next generation of memory and unconventional computing. (paper)

A 3-DOF SOI MEMS ultrasonic energy harvester for implanted devices

International Nuclear Information System (INIS)

Fowler, A G; Moheimani, S O R; Behrens, S

2013-01-01

This paper reports the design and testing of a microelectromechanical systems (MEMS) energy harvester that is designed to harvest electrical energy from an external source of ultrasonic waves. This mechanism is potentially suited to applications including the powering of implanted devices for biomedical applications. The harvester employs a novel 3-degree of freedom design, with electrical energy being generated from displacements of a proof mass via electrostatic transducers. A silicon-on-insulator MEMS process was used to fabricate the device, with experimental characterization showing that the harvester can generate 24.7 nW, 19.8 nW, and 14.5 nW of electrical power respectively through its x-, y-, and z-axis vibrational modes

Characterization of Porous WO3 Electrochromic Device by Electrochemical Impedance Spectroscopy

Directory of Open Access Journals (Sweden)

Chien Chon Chen

2013-01-01

Full Text Available This paper concerns the microstructure of the anodic tungsten oxide (WO3 and its use in an electrochromic (EC glass device. When voltages between 100 V and 160 V were applied to tungsten film for 1 h under 0.4 wt. % NaF electrolyte, porous WO3 film was formed. The film, which had a large surface area, was used as electrochromic film for EC glass. The average transmittance in a visible region of the spectrum for a 144 cm2 EC device was above 75% in the bleached state and below 40% in the colored state, respectively. Repeatability using of the colored/bleached cycles was tested good by a cyclic voltammograms method. The internal impedance values under colored and bleached states were detected and simulated using an electrical impedance spectra (EIS technique. The EC glass impedance characteristics were simulated using resistors, capacitors, and Warburg impedance. The ITO/WO3, WO3/electrolyte, electrolyte/NiO, and NiO/ITO interfaces can be simulated using a resistance capacitance (RC parallel circuits, and bulk materials such as the indium tin oxide (ITO and conducting wire can be simulated by using a series of resisters.

Novel Concepts for Device to Device Communication using Network Coding

DEFF Research Database (Denmark)

Pahlevani, Peyman; Hundebøll, Martin; Pedersen, Morten Videbæk

2014-01-01

Device-to-device communication is currently a hot research topic within 3GPP. Even though D2D communication has been part of previous ad hoc, meshed and sensor networks proposals, the main contribution by 3GPP is that the direct communication among two devices is carried out over a dynamically as...

A Modular Microfluidic Device via Multimaterial 3D Printing for Emulsion Generation.

Science.gov (United States)

Ji, Qinglei; Zhang, Jia Ming; Liu, Ying; Li, Xiying; Lv, Pengyu; Jin, Dongping; Duan, Huiling

2018-03-19

3D-printing (3DP) technology has been developing rapidly. However, limited studies on the contribution of 3DP technology, especially multimaterial 3DP technology, to droplet-microfluidics have been reported. In this paper, multimaterial 3D-printed devices for the pneumatic control of emulsion generation have been reported. A 3D coaxial flexible channel with other rigid structures has been designed and printed monolithically. Numerical and experimental studies have demonstrated that this flexible channel can be excited by the air pressure and then deform in a controllable way, which can provide the active control of droplet generation. Furthermore, a novel modular microfluidic device for double emulsion generation has been designed and fabricated, which consists of three modules: function module, T-junction module, and co-flow module. The function module can be replaced by (1) Single-inlet module, (2) Pneumatic Control Unit (PCU) module and (3) Dual-inlet module. Different modules can be easily assembled for different double emulsion production. By using the PCU module, double emulsions with different number of inner droplets have been successfully produced without complicated operation of flow rates of different phases. By using single and dual inlet module, various double emulsions with different number of encapsulated droplets or encapsulated droplets with different compositions have been successfully produced, respectively.

Inductance analysis of superconducting quantum interference devices with 3D nano-bridge junctions

Science.gov (United States)

Wang, Hao; Yang, Ruoting; Li, Guanqun; Wu, Long; Liu, Xiaoyu; Chen, Lei; Ren, Jie; Wang, Zhen

2018-05-01

Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μA for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 nΦ0/(Hz)1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.

Bs0–B-bars0 mixing within minimal flavor-violating two-Higgs-doublet models

International Nuclear Information System (INIS)

Chang, Qin; Li, Pei-Fu; Li, Xin-Qiang

2015-01-01

In the “Higgs basis” for a generic 2HDM, only one scalar doublet gets a nonzero vacuum expectation value and, under the criterion of minimal flavor violation, the other one is fixed to be either color-singlet or color-octet, which are named as the type-III and type-C models, respectively. In this paper, the charged-Higgs effects of these two models on B s 0 –B -bar s 0 mixing are studied. First of all, we perform a complete one-loop computation of the electro-weak corrections to the amplitudes of B s 0 –B -bar s 0 mixing. Together with the up-to-date experimental measurements, a detailed phenomenological analysis is then performed in the cases of both real and complex Yukawa couplings of charged scalars to quarks. The spaces of model parameters allowed by the current experimental data on B s 0 –B -bar s 0 mixing are obtained and the differences between type-III and type-C models are investigated, which is helpful to distinguish between these two models

Role of Al2O3 thin layer on improving the resistive switching properties of Ta5Si3-based conductive bridge random accesses memory device

Science.gov (United States)

Kumar, Dayanand; Aluguri, Rakesh; Chand, Umesh; Tseng, Tseung-Yuen

2018-04-01

Ta5Si3-based conductive bridge random access memory (CBRAM) devices have been investigated to improve their resistive switching characteristics for their application in future nonvolatile memory technology. Changes in the switching characteristics by the addition of a thin Al2O3 layer of different thicknesses at the bottom electrode interface of a Ta5Si3-based CBRAM devices have been studied. The double-layer device with a 1 nm Al2O3 layer has shown improved resistive switching characteristics over the single layer one with a high on/off resistance ratio of 102, high endurance of more than 104 cycles, and good retention for more than 105 s at the temperature of 130 °C. The higher thermal conductivity of Al2O3 over Ta5Si3 has been attributed to the enhanced switching properties of the double-layer devices.

Ideal-MHD beta limits: scaling laws and comparison with Doublet III high-beta plasmas

International Nuclear Information System (INIS)

Bernard, L.C.; Bhadra, D.K.; Helton, F.J.; Lao, L.L.; Todd, T.N.

1983-06-01

Doublet III (DIII) recently has achieved a value for #betta#, the ratio of volume averaged plasma to magnetic pressure, of 4.5%. This #betta# value is in the range required for an economically attractive tokamak reactor, and also close to the relevant limit predicted by ideal-MHD theory. It is therefore of great interest to assess the validity of the theory by comparison with experiment and thus to have a basis for the prediction of future reactor performance. A large variety of plasma shapes have been obtained in DIII. These shapes can be divided into two classes: (1) limiter discharges, and (2) diverted discharges, which are of great interest because of their good confinement in the H-mode operation. We derive simple scaling laws from the variation of optimized ideal-MHD beta limits (#betta#/sub c/) with plasma shape parameters. The current profile is optimized for fixed plasma shapes, separately for the high-n (ballooning) and the low-n (kink) modes. Results are presented in the form of suitability normalized curves of #betta# versus poloidal beta, #betta#/sub p/, for both ballooning and kink modes in order to simultaneously compare all the DIII experimental data

Research on 3-D base isolation system applied to new power reactor 3-D seismic isolation device with rolling seal type air spring: Pt.2

International Nuclear Information System (INIS)

Junji Suhara; Ryoichiro Matsumoto; Shinsuke Oguri; Yasuo Okada; Kazuhiko Inoue; Kenji Takahashi

2005-01-01

A three dimensional seismic base isolation device was developed for heavy structures and buildings such as nuclear power reactor buildings. The device realizes 3-D isolation by combining a LRB (laminated rubber bearing) for horizontal isolation with an air spring for vertical isolation in series. In this study, scale models of the 3-D base isolation device were made and were tested to examine the dynamic properties and ultimate strengths of the device. The performance of the device under earthquake excitation was examined through shaking table tests of 1/7 scale models. As the results, it was confirmed that the device worked smoothly under the horizontal and vertical excitations, and that the theoretical formulae of the orifice damping could explain the test results. The high-pressure air springs of trial production were forced to burst to find out which factor influenced ultimate strength. It was confirmed from results of the burst test that the strength of the air spring depended upon the diameter of rolling part of the bellows and the number of layers of the reinforcing fibers. Judging from the results of the shaking table test and the burst test, the developed 3-D base isolation device was applicable to a nuclear power plant building. (authors)

3D-printed components for quantum devices.

Science.gov (United States)

Saint, R; Evans, W; Zhou, Y; Barrett, T; Fromhold, T M; Saleh, E; Maskery, I; Tuck, C; Wildman, R; Oručević, F; Krüger, P

2018-05-30

Recent advances in the preparation, control and measurement of atomic gases have led to new insights into the quantum world and unprecedented metrological sensitivities, e.g. in measuring gravitational forces and magnetic fields. The full potential of applying such capabilities to areas as diverse as biomedical imaging, non-invasive underground mapping, and GPS-free navigation can only be realised with the scalable production of efficient, robust and portable devices. We introduce additive manufacturing as a production technique of quantum device components with unrivalled design freedom and rapid prototyping. This provides a step change in efficiency, compactness and facilitates systems integration. As a demonstrator we present an ultrahigh vacuum compatible ultracold atom source dissipating less than ten milliwatts of electrical power during field generation to produce large samples of cold rubidium gases. This disruptive technology opens the door to drastically improved integrated structures, which will further reduce size and assembly complexity in scalable series manufacture of bespoke portable quantum devices.

A low-cost microwell device for high-resolution imaging of neurite outgrowth in 3D

Science.gov (United States)

Ren, Yuan; Mlodzianoski, Michael J.; Cheun Lee, Aih; Huang, Fang; Suter, Daniel M.

2018-06-01

Objective. Current neuronal cell culture is mostly performed on two-dimensional (2D) surfaces, which lack many of the important features of the native environment of neurons, including topographical cues, deformable extracellular matrix, and spatial isotropy or anisotropy in three dimensions. Although three-dimensional (3D) cell culture systems provide a more physiologically relevant environment than 2D systems, their popularity is greatly hampered by the lack of easy-to-make-and-use devices. We aim to develop a widely applicable 3D culture procedure to facilitate the transition of neuronal cultures from 2D to 3D. Approach. We made a simple microwell device for 3D neuronal cell culture that is inexpensive, easy to assemble, and fully compatible with commonly used imaging techniques, including super-resolution microscopy. Main results. We developed a novel gel mixture to support 3D neurite regeneration of Aplysia bag cell neurons, a system that has been extensively used for quantitative analysis of growth cone dynamics in 2D. We found that the morphology and growth pattern of bag cell growth cones in 3D culture closely resemble the ones of growth cones observed in vivo. We demonstrated the capability of our device for high-resolution imaging of cytoskeletal and signaling proteins as well as organelles. Significance. Neuronal cell culture has been a valuable tool for neuroscientists to study the behavior of neurons in a controlled environment. Compared to 2D, neurons cultured in 3D retain the majority of their native characteristics, while offering higher accessibility, control, and repeatability. We expect that our microwell device will facilitate a wider adoption of 3D neuronal cultures to study the mechanisms of neurite regeneration.

Josephson effect in Al/Bi{sub 2}Se{sub 3}/Al coplanar hybrid devices

Energy Technology Data Exchange (ETDEWEB)

Galletti, L., E-mail: luca.galletti@unina.it [Dipartimento di Scienze Fisiche, Università degli Studi di Napoli Federico II, I-80126 Napoli (Italy); CNR-SPIN Napoli, Complesso Universitario di Monte Sant’Angelo, 80126 Napoli (Italy); Charpentier, S. [Department of Microtechnology and Nanoscience, Chalmers University of Technology, SE-41296 Göteborg (Sweden); Lucignano, P.; Massarotti, D. [Dipartimento di Scienze Fisiche, Università degli Studi di Napoli Federico II, I-80126 Napoli (Italy); CNR-SPIN Napoli, Complesso Universitario di Monte Sant’Angelo, 80126 Napoli (Italy); Arpaia, R. [Dipartimento di Scienze Fisiche, Università degli Studi di Napoli Federico II, I-80126 Napoli (Italy); Department of Microtechnology and Nanoscience, Chalmers University of Technology, SE-41296 Göteborg (Sweden); Tafuri, F. [CNR-SPIN Napoli, Complesso Universitario di Monte Sant’Angelo, 80126 Napoli (Italy); Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università di Napoli, I-81031 Aversa (CE) (Italy); Bauch, T. [Department of Microtechnology and Nanoscience, Chalmers University of Technology, SE-41296 Göteborg (Sweden); Suzuki, Y. [University of Tsukuba, Institute of Materials Science, Tsukuba 305, Ibaraki (Japan); Tagliacozzo, A. [Dipartimento di Scienze Fisiche, Università degli Studi di Napoli Federico II, I-80126 Napoli (Italy); Kadowaki, K. [University of Tsukuba, Institute of Materials Science, Tsukuba 305, Ibaraki (Japan); Lombardi, F. [Department of Microtechnology and Nanoscience, Chalmers University of Technology, SE-41296 Göteborg (Sweden)

2014-08-15

Highlights: • Superconducting proximity effect induced in Al/Bi{sub 2}Se{sub 3}/Al coplanar hybrid devices. • Comparative study of Al/Bi{sub 2}Se{sub 3} interfaces with various buffer layers. • Towards a Josephson super-current through the edge states of topological insulators. - Abstract: The edge states of Topological Insulators (TI) are protected against backscattering, thanks to the topological properties arising from their band structure. Coupling a TI to a superconductor (S) can induce unconventional effects, including the creation of Majorana bound states (MBS). The fabrication of coplanar hybrid devices is a fundamental step to pave the way to the understanding of proximity effects in topologically non-trivial systems, and to a large variety of experiments aimed at the possible detection of MBS. We discuss the feasibility and some relevant properties of Al–Bi{sub 2}Se{sub 3}–Al coplanar proximity devices. Special attention is devoted to the design of the junction, aimed at enhancing the coupling between the electrodes and the TI.

Facial expression identification using 3D geometric features from Microsoft Kinect device

Science.gov (United States)

Han, Dongxu; Al Jawad, Naseer; Du, Hongbo

2016-05-01

Facial expression identification is an important part of face recognition and closely related to emotion detection from face images. Various solutions have been proposed in the past using different types of cameras and features. Microsoft Kinect device has been widely used for multimedia interactions. More recently, the device has been increasingly deployed for supporting scientific investigations. This paper explores the effectiveness of using the device in identifying emotional facial expressions such as surprise, smile, sad, etc. and evaluates the usefulness of 3D data points on a face mesh structure obtained from the Kinect device. We present a distance-based geometric feature component that is derived from the distances between points on the face mesh and selected reference points in a single frame. The feature components extracted across a sequence of frames starting and ending by neutral emotion represent a whole expression. The feature vector eliminates the need for complex face orientation correction, simplifying the feature extraction process and making it more efficient. We applied the kNN classifier that exploits a feature component based similarity measure following the principle of dynamic time warping to determine the closest neighbors. Preliminary tests on a small scale database of different facial expressions show promises of the newly developed features and the usefulness of the Kinect device in facial expression identification.

Next-to-leading order unitarity fits in Two-Higgs-Doublet models with soft ℤ{sub 2} breaking

Energy Technology Data Exchange (ETDEWEB)

Cacchio, Vincenzo; Chowdhury, Debtosh; Eberhardt, Otto [Istituto Nazionale di Fisica Nucleare, Sezione di Roma,Piazzale Aldo Moro 2, I-00185 Roma (Italy); Murphy, Christopher W. [Scuola Normale Superiore,Piazza dei Cavalieri 7, I-56126 Pisa (Italy)

2016-11-07

We fit the next-to-leading order unitarity conditions to the Two-Higgs-Doublet model with a softly broken ℤ{sub 2} symmetry. In doing so, we alleviate the existing uncertainty on how to treat higher order corrections to quartic couplings of its Higgs potential. A simplified approach to implementing the next-to-leading order unitarity conditions is presented. These new bounds are then combined with all other relevant constraints, including the complete set of LHC Run I data. The upper 95% bounds we find are 4.2 on the absolute values of the quartic couplings, and 235 GeV (100 GeV) for the mass degeneracies between the heavy Higgs particles in the type I (type II) scenario. In type II, we exclude an unbroken ℤ{sub 2} symmetry with a probability of 95%. All fits are performed using the open-source code HEPfit.

Interpretation and mapping of geological features using mobile devices for 3D outcrop modelling

Science.gov (United States)

Buckley, Simon J.; Kehl, Christian; Mullins, James R.; Howell, John A.

2016-04-01

Advances in 3D digital geometric characterisation have resulted in widespread adoption in recent years, with photorealistic models utilised for interpretation, quantitative and qualitative analysis, as well as education, in an increasingly diverse range of geoscience applications. Topographic models created using lidar and photogrammetry, optionally combined with imagery from sensors such as hyperspectral and thermal cameras, are now becoming commonplace in geoscientific research. Mobile devices (tablets and smartphones) are maturing rapidly to become powerful field computers capable of displaying and interpreting 3D models directly in the field. With increasingly high-quality digital image capture, combined with on-board sensor pose estimation, mobile devices are, in addition, a source of primary data, which can be employed to enhance existing geological models. Adding supplementary image textures and 2D annotations to photorealistic models is therefore a desirable next step to complement conventional field geoscience. This contribution reports on research into field-based interpretation and conceptual sketching on images and photorealistic models on mobile devices, motivated by the desire to utilise digital outcrop models to generate high quality training images (TIs) for multipoint statistics (MPS) property modelling. Representative training images define sedimentological concepts and spatial relationships between elements in the system, which are subsequently modelled using artificial learning to populate geocellular models. Photorealistic outcrop models are underused sources of quantitative and qualitative information for generating TIs, explored further in this research by linking field and office workflows through the mobile device. Existing textured models are loaded to the mobile device, allowing rendering in a 3D environment. Because interpretation in 2D is more familiar and comfortable for users, the developed application allows new images to be captured

DeviceNet-based device-level control in SSRF

CERN Document Server

Leng Yong Bin; Lu Cheng Meng; Miao Hai Feng; Liu Song Qiang; Shen Guo Bao

2002-01-01

The control system of Shanghai Synchrotron Radiation Facility is an EPICS-based distributed system. One of the key techniques to construct the system is the device-level control. The author describes the design and implementation of the DeviceNet-based device controller. A prototype of the device controller was tested in the experiments of magnet power supply and the result showed a precision of 3 x 10 sup - sup 5

Optical and electrical properties of P3HT:graphene composite based devices

Science.gov (United States)

Yadav, Anjali; Verma, Ajay Singh; Gupta, Saral Kumar; Negi, Chandra Mohan Singh

2018-04-01

The polymer-carbon derivate composites are well known for their uses and performances in the photovoltaic and optoelectronic industries. In this paper, we synthesis P3HT:graphene composites and discuss their optical and electrical properties. The composites have been prepared by using spin-coating technique onto the glass substrates. It has been found that the incorporation of graphene reduces absorption intensity. However, absorption peak remain unchanged with addition of graphene. The surface morphology studies display homogeneous distribution of graphene with P3HT. Raman studies suggest that chemical structure was not affected by graphene doping. Devices having the structure of glass/ITO/P3HT/ Al and glass ITO/P3HT:graphene/Al were then fabricated. I-V behavior of the fabricated devices was found to be similar to the Schottky diode. ITO/P3HT:graphene/Al structure shows tremendous increase in current values as compared to the ITO/P3HT/Al. Furthermore, charge transport mechanism were studied by analyzing the double logarithmic J-V characteristics curve, which indicates that the current at low voltage follows Ohmic behavior, trap-charge limited conduction (TCLC) mechanism at an intermediate voltage and space charge limited conduction (SCLC) mechanism at sufficiently high voltages.

Study on invadopodia formation for lung carcinoma invasion with a microfluidic 3D culture device.

Science.gov (United States)

Wang, Shanshan; Li, Encheng; Gao, Yanghui; Wang, Yan; Guo, Zhe; He, Jiarui; Zhang, Jianing; Gao, Zhancheng; Wang, Qi

2013-01-01

Invadopodia or invasive feet, which are actin-rich membrane protrusions with matrix degradation activity formed by invasive cancer cells, are a key determinant in the malignant invasive progression of tumors and represent an important target for cancer therapies. In this work, we presented a microfluidic 3D culture device with continuous supplement of fresh media via a syringe pump. The device mimicked tumor microenvironment in vivo and could be used to assay invadopodia formation and to study the mechanism of human lung cancer invasion. With this device, we investigated the effects of epidermal growth factor (EGF) and matrix metalloproteinase (MMP) inhibitor, GM6001 on invadopodia formation by human non-small cell lung cancer cell line A549 in 3D matrix model. This device was composed of three units that were capable of achieving the assays on one control group and two experimental groups' cells, which were simultaneously pretreated with EGF or GM6001 in parallel. Immunofluorescence analysis of invadopodia formation and extracellular matrix degradation was conducted using confocal imaging system. We observed that EGF promoted invadopodia formation by A549 cells in 3D matrix and that GM6001 inhibited the process. These results demonstrated that epidermal growth factor receptor (EGFR) signaling played a significant role in invadopodia formation and related ECM degradation activity. Meanwhile, it was suggested that MMP inhibitor (GM6001) might be a powerful therapeutic agent targeting invadopodia formation in tumor invasion. This work clearly demonstrated that the microfluidic-based 3D culture device provided an applicable platform for elucidating the mechanism of cancer invasion and could be used in testing other anti-invasion agents.

Electroluminescence dependence on the organic thickness in ZnO nano rods/Alq3 heterostructure devices.

Science.gov (United States)

Kan, Pengzhi; Wang, Yongsheng; Zhao, Suling; Xu, Zheng; Wang, Dawei

2011-04-01

ZnO nanorods are synthesised by a hydrothermal method on ITO glass. Their crystallization and morphology are detected by XRD and SEM, respectively. The results show that the ZnO nanorod array has grown primarily along a direction aligned perpendicular to the ITO substrate. The average height and diameter of the nanorods is about 130 nm and 30 nm, respectively. Then ZnO nano rods/Alq3 heterostructure LEDs are prepared by thermal evaporation of Alq3 molecules. The thicknesses of the Alq3 layers are 130 nm, 150 nm, 170 nm and 190 nm, respectively. The electroluminescence of the devices is detected under different DC bias voltages. The exciton emission of Alq3 is detected in all devices. When the thickness of Alq3 is 130 nm, the UV electroluminescence of ZnO is around 382 nm, and defect emissions around 670 nm and 740 nm are detected. Defect emissions of ZnO nanorods are prominent. When the thickness of Alq3 increases to over 170 nm, it is difficult to observe defect emissions from the ZnO nano rods. In such devices, the exciton emission of Alq3 is more prominent than other emissions under different bias voltage.

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

DEFF Research Database (Denmark)

Tanenbaum, David M.; Hermenau, Martin; Voroshazi, Eszter

2012-01-01

Seven distinct sets (n ¢ 12) of state of the art organic photovoltaic devices were prepared by leading research laboratories in a collaboration planned at the Third International Summit on Organic Photovoltaic Stability (ISOS-3). All devices were shipped to RISØ DTU and characterized simultaneously...... in the study. We present here design and fabrication details for the seven device sets, benefits and challenges associated with the unprecedented size of the collaboration, characterization protocols, and results both on individual device stability and uniformity of device sets, in the three illumination...

A measurement of the radiative widths of the 16.6-16.9 MeV doublet in 8Be

International Nuclear Information System (INIS)

Nathan, Alan Marc

1975-01-01

The isovector M1 decay rates of the 16.6-16.9 MeV 2+ doublet in 8 Be to the 2.9 MeV 2+ first excited state have been measured. The total rate summed over both levels is found to be Γ mi = 4.94+0.80 eV. This allows a determination of the weak magnetism form factor b which is proportional to Γ mi 1/2 . If this result is compared with the result of a recent teta-alpha angular correlation measurement in the beta decays of the analogue 8 Li and 8 B ground states to the same final state, a model independent test of the Conserved Vector Current theory is possible. It is shown that the existing data are consistent with both CVC and the nonexistence of a 2. class induced tensor form factor. (author)

One-loop corrections to the perturbative unitarity bounds in the CP-conserving two-Higgs doublet model with a softly broken ℤ{sub 2} symmetry

Energy Technology Data Exchange (ETDEWEB)

Grinstein, Benjamín [Department of Physics, University of California, San Diego, 9500 Gilman Drive, La Jolla, CA 92093 (United States); Murphy, Christopher W. [Scuola Normale Superiore, Piazza dei Cavalieri 7, Pisa 56126 (Italy); Uttayarat, Patipan [Department of Physics, Srinakharinwirot University, Wattana, Bangkok 10110 (Thailand)

2016-06-13

We compute all of the one-loop corrections that are enhanced, O(λ{sub i}λ{sub j}/16π{sup 2}), in the limit s≫|λ{sub i}|v{sup 2}≫M{sub W}{sup 2}, s≫m{sub 12}{sup 2} to all the 2→2 longitudinal vector boson and Higgs boson scattering amplitudes in the CP-conserving two-Higgs doublet model with a softly broken ℤ{sub 2} symmetry. In the two simplified scenarios we study, the typical bound we find is |λ{sub i}(s)|⪅4.

Computer Simulation of Robotic Device Components in 3D Printer Manufacturing

Directory of Open Access Journals (Sweden)

M. A. Kiselev

2016-01-01

Full Text Available The paper considers a relevant problem "Computer simulation of robotic device components in manufacturing on a 3D printer" and highlights the problem of computer simulation based on the cognitive programming technology of robotic device components. The paper subject is urgent because computer simulation of force-torque and accuracy characteristics of robot components in terms of their manufacturing properties and conditions from polymeric and metallic materials is of paramount importance for programming and manufacturing on the 3D printers. Two types of additive manufacturing technologies were used:1. FDM (Fused deposition modeling - layered growth of products from molten plastic strands;2. SLM (Selective laser melting - selective laser sintering of metal powders, which, in turn, create:• conditions for reducing the use of expensive equipment;• reducing weight and increasing strength through optimization of  the lattice structures when using a bionic design;• a capability to implement mathematical modeling of individual components of robotic and other devices in terms of appropriate characteristics;• a 3D printing capability to create unique items, which cannot be made by other known methods.The paper aim was to confirm the possibility of ensuring the strength and accuracy characteristics of cases when printing from polymeric and metallic materials on a 3D printer. The investigation emphasis is on mathematical modeling based on the cognitive programming technology using the additive technologies in their studies since it is, generally, impossible to make the obtained optimized structures on the modern CNC machines.The latter allows us to create a program code to be clear to other developers without cost, additional time for development, adaptation and implementation.Year by year Russian companies increasingly use a 3D-print system in mechanical engineering, aerospace industry, and for scientific purposes. Machines for the additive

3D printing and milling a real-time PCR device for infectious disease diagnostics

Science.gov (United States)

Mulberry, Geoffrey; White, Kevin A.; Vaidya, Manjusha; Sugaya, Kiminobu

2017-01-01

Diagnosing infectious diseases using quantitative polymerase chain reaction (qPCR) offers a conclusive result in determining the infection, the strain or type of pathogen, and the level of infection. However, due to the high-cost instrumentation involved and the complexity in maintenance, it is rarely used in the field to make a quick turnaround diagnosis. In order to provide a higher level of accessibility than current qPCR devices, a set of 3D manufacturing methods is explored as a possible option to fabricate a low-cost and portable qPCR device. The key advantage of this approach is the ability to upload the digital format of the design files on the internet for wide distribution so that people at any location can simply download and feed into their 3D printers for quick manufacturing. The material and design are carefully selected to minimize the number of custom parts that depend on advanced manufacturing processes which lower accessibility. The presented 3D manufactured qPCR device is tested with 20-μL samples that contain various concentrations of lentivirus, the same type as HIV. A reverse-transcription step is a part of the device’s operation, which takes place prior to the qPCR step to reverse transcribe the target RNA from the lentivirus into complementary DNA (cDNA). This is immediately followed by qPCR which quantifies the target sequence molecules in the sample during the PCR amplification process. The entire process of thermal control and time-coordinated fluorescence reading is automated by closed-loop feedback and a microcontroller. The resulting device is portable and battery-operated, with a size of 12 × 7 × 6 cm3 and mass of only 214 g. By uploading and sharing the design files online, the presented low-cost qPCR device may provide easier access to a robust diagnosis protocol for various infectious diseases, such as HIV and malaria. PMID:28586401

3D printed metal molds for hot embossing plastic microfluidic devices.

Science.gov (United States)

Lin, Tung-Yi; Do, Truong; Kwon, Patrick; Lillehoj, Peter B

2017-01-17

Plastics are one of the most commonly used materials for fabricating microfluidic devices. While various methods exist for fabricating plastic microdevices, hot embossing offers several unique advantages including high throughput, excellent compatibility with most thermoplastics and low start-up costs. However, hot embossing requires metal or silicon molds that are fabricated using CNC milling or microfabrication techniques which are time consuming, expensive and required skilled technicians. Here, we demonstrate for the first time the fabrication of plastic microchannels using 3D printed metal molds. Through optimization of the powder composition and processing parameters, we were able to generate stainless steel molds with superior material properties (density and surface finish) than previously reported 3D printed metal parts. Molds were used to fabricate poly(methyl methacrylate) (PMMA) replicas which exhibited good feature integrity and replication quality. Microchannels fabricated using these replicas exhibited leak-free operation and comparable flow performance as those fabricated from CNC milled molds. The speed and simplicity of this approach can greatly facilitate the development (i.e. prototyping) and manufacture of plastic microfluidic devices for research and commercial applications.

Simultaneous 3D-vibration measurement using a single laser beam device

Science.gov (United States)

Brecher, Christian; Guralnik, Alexander; Baümler, Stephan

2012-06-01

Today's commercial solutions for vibration measurement and modal analysis are 3D-scanning laser doppler vibrometers, mainly used for open surfaces in the automotive and aerospace industries and the classic three-axial accelerometers in civil engineering, for most industrial applications in manufacturing environments, and particularly for partially closed structures. This paper presents a novel measurement approach using a single laser beam device and optical reflectors to simultaneously perform 3D-dynamic measurement as well as geometry measurement of the investigated object. We show the application of this so called laser tracker for modal testing of structures on a mechanical manufacturing shop floor. A holistic measurement method is developed containing manual reflector placement, semi-automated geometric modeling of investigated objects and fully automated vibration measurement up to 1000 Hz and down to few microns amplitude. Additionally the fast set up dynamic measurement of moving objects using a tracking technique is presented that only uses the device's own functionalities and does neither require a predefined moving path of the target nor an electronic synchronization to the moving object.

Coexistence of nonvolatility and volatility in Pt/Nb-doped SrTiO3/In memristive devices

International Nuclear Information System (INIS)

Yang, M; Bao, D H; Li, S W

2013-01-01

Memristive devices are triggering innovations in the fields of nonvolatile memory, digital logic, analogue circuits, neuromorphic engineering, and so on. Creating new memristive devices with unique characteristics would be significant for these emergent applications. Here we report the coexistence of nonvolatility and volatility in Pt/Nb-doped SrTiO 3 (NSTO)/In memristive devices. The Pt/NSTO interface contributes a nonvolatile resistive switching behaviour, whereas the NSTO/In interface displays a volatile hysteresis loop. Combining the two interfaces in the Pt/NSTO/In devices leads to the unique coexistence of nonvolatility and volatility. The results imply more opportunities to invent new memristive devices by engineering both interfaces in metal/insulator/metal structures. (paper)

3G, 4G and beyond bringing networks, devices and the web together

CERN Document Server

Sauter, Martin

2012-01-01

Extensively updated evaluation of current and future network technologies, applications and devices  This book follows on from its successful predecessor with an introduction to next generation network technologies, mobile devices, voice and multimedia services and the mobile web 2.0.  Giving a sound technical introduction to 3GPP wireless systems, this book explains the decisions taken during standardization of the most popular wireless network standards today, LTE, LTE-Advanced and HSPA+.  It discusses how these elements strongly influence each other and how network ca

High scale impact in alignment and decoupling in two-Higgs-doublet models

Science.gov (United States)

Basler, Philipp; Ferreira, Pedro M.; Mühlleitner, Margarete; Santos, Rui

2018-05-01

The two-Higgs-doublet model (2HDM) provides an excellent benchmark to study physics beyond the Standard Model (SM). In this work, we discuss how the behavior of the model at high-energy scales causes it to have a scalar with properties very similar to those of the SM—which means the 2HDM can be seen to naturally favor a decoupling or alignment limit. For a type II 2HDM, we show that requiring the model to be theoretically valid up to a scale of 1 TeV, by studying the renormalization group equations (RGE) of the parameters of the model, causes a significant reduction in the allowed magnitude of the quartic couplings. This, combined with B -physics bounds, forces the model to be naturally decoupled. As a consequence, any nondecoupling limits in type II, like the wrong-sign scenario, are excluded. On the contrary, even with the very constraining limits for the Higgs couplings from the LHC, the type I model can deviate substantially from alignment. An RGE analysis similar to that made for type II shows, however, that requiring a single scalar to be heavier than about 500 GeV would be sufficient for the model to be decoupled. Finally, we show that the 2HDM is stable up to the Planck scale independently of which of the C P -even scalars is the discovered 125 GeV Higgs boson.

A COUPLED CHEMISTRY-EMISSION MODEL FOR ATOMIC OXYGEN GREEN AND RED-DOUBLET EMISSIONS IN THE COMET C/1996 B2 HYAKUTAKE

Energy Technology Data Exchange (ETDEWEB)

Bhardwaj, Anil; Raghuram, Susarla, E-mail: bhardwaj_spl@yahoo.com, E-mail: anil_bhardwaj@vssc.gov.in, E-mail: raghuramsusarla@gmail.com [Space Physics Laboratory, Vikram Sarabhai Space Centre, Trivandrum 695022 (India)

2012-03-20

The green (5577 Angstrom-Sign ) and red-doublet (6300, 6364 Angstrom-Sign ) lines are prompt emissions of metastable oxygen atoms in the {sup 1}S and {sup 1}D states, respectively, that have been observed in several comets. The value of the intensity ratio of green to red-doublet (G/R ratio) of 0.1 has been used as a benchmark to identify the parent molecule of oxygen lines as H{sub 2}O. A coupled chemistry-emission model is developed to study the production and loss mechanisms of the O({sup 1}S) and O({sup 1}D) atoms and the generation of red and green lines in the coma of C/1996 B2 Hyakutake. The G/R ratio depends not only on photochemistry, but also on the projected area observed for cometary coma, which is a function of the dimension of the slit used and the geocentric distance of the comet. Calculations show that the contribution of photodissociation of H{sub 2}O to the green (red) line emission is 30%-70% (60%-90%), while CO{sub 2} and CO are the next potential sources contributing 25%-50% (<5%). The ratio of the photoproduction rate of O({sup 1} S) to O({sup 1} D) would be around 0.03 ({+-}0.01) if H{sub 2}O is the main source of oxygen lines, whereas it is {approx}0.6 if the parent is CO{sub 2}. Our calculations suggest that the yield of O({sup 1} S) production in the photodissociation of H{sub 2}O cannot be larger than 1%. The model-calculated radial brightness profiles of the red and green lines and G/R ratios are in good agreement with the observations made on the comet Hyakutake in 1996 March.

Direct Vapor Growth of Perovskite CsPbBr3 Nanoplate Electroluminescence Devices.

Science.gov (United States)

Hu, Xuelu; Zhou, Hong; Jiang, Zhenyu; Wang, Xiao; Yuan, Shuangping; Lan, Jianyue; Fu, Yongping; Zhang, Xuehong; Zheng, Weihao; Wang, Xiaoxia; Zhu, Xiaoli; Liao, Lei; Xu, Gengzhao; Jin, Song; Pan, Anlian

2017-10-24

Metal halide perovskite nanostructures hold great promises as nanoscale light sources for integrated photonics due to their excellent optoelectronic properties. However, it remains a great challenge to fabricate halide perovskite nanodevices using traditional lithographic methods because the halide perovskites can be dissolved in polar solvents that are required in the traditional device fabrication process. Herein, we report single CsPbBr 3 nanoplate electroluminescence (EL) devices fabricated by directly growing CsPbBr 3 nanoplates on prepatterned indium tin oxide (ITO) electrodes via a vapor-phase deposition. Bright EL occurs in the region near the negatively biased contact, with a turn-on voltage of ∼3 V, a narrow full width at half-maximum of 22 nm, and an external quantum efficiency of ∼0.2%. Moreover, through scanning photocurrent microscopy and surface electrostatic potential measurements, we found that the formation of ITO/p-type CsPbBr 3 Schottky barriers with highly efficient carrier injection is essential in realizing the EL. The formation of the ITO/p-type CsPbBr 3 Schottky diode is also confirmed by the corresponding transistor characteristics. The achievement of EL nanodevices enabled by directly grown perovskite nanostructures could find applications in on-chip integrated photonics circuits and systems.

The spin-orbit interaction and SU(3) generators in superdeformation

Energy Technology Data Exchange (ETDEWEB)

Sugawara-Tanabe, K [School of Social Information, Otsuma Women` s University, Tokyo (Japan); Arima, A [Tokyo Univ. (Japan). Dept. of Physics

1992-08-01

The authors found that the effect of spin-orbit coupling becomes smaller for the parity doublet level and for some other levels around superdeformation. This is because of the strongly deformed quadrupole field, which indicates the L-S coupling scheme is recovered for these levels. These levels can be described by an SU-3 group with eight generators and a Casimir operator. 6 refs., 3 figs.

Adapting multiuser 3D virtual environments to heterogeneous devices

OpenAIRE

Araujo, Regina Borges de; Silva, Alessandro Rodrigues e; Todesco, Glauco

2006-01-01

With the growing dissemination and reliability of wireless networks and the emergence of devices with increasing processing and communication power, applications that up to now were restricted to the PCs are being envisaged to run on devices as heterogeneous as wrist clocks, refrigerators with access to the internet, mobile phones, PDAs, set-top-boxes, game consoles etc. Application development for this myriad of devices and networks with different capabilities requires special attention from...

Coherent population transfer and superposition of atomic states via stimulated Raman adiabatic passage using an excited-doublet four-level atom

International Nuclear Information System (INIS)

Jin Shiqi; Gong Shangqing; Li Ruxin; Xu Zhizhan

2004-01-01

Coherent population transfer and superposition of atomic states via a technique of stimulated Raman adiabatic passage in an excited-doublet four-level atomic system have been analyzed. It is shown that the behavior of adiabatic passage in this system depends crucially on the detunings between the laser frequencies and the corresponding atomic transition frequencies. Particularly, if both the fields are tuned to the center of the two upper levels, the four-level system has two degenerate dark states, although one of them contains the contribution from the excited atomic states. The nonadiabatic coupling of the two degenerate dark states is intrinsic, it originates from the energy difference of the two upper levels. An arbitrary superposition of atomic states can be prepared due to such nonadiabatic coupling effect

H+H- interaction up to higher orders of perturbation theory in the model with two Higgs doublets (self-energy and vertex diagrams)

International Nuclear Information System (INIS)

Dvoeglazov, V.V.; Skachkov, N.B.

1991-01-01

Self-energy and vertex blocks that enter into the amplitude of Higgs-Higgs-interaction are calculated up to the fourth order of perturbation theory in the framework of the model of electroweak interaction with two Higgs doublets and an arbitrary number of fermions. The renormalization is performed on the mass shell of the physical fields after a spontaneous symmetry breaking. The values of the coupling constants are, as a rule, not concretized in the paper. In the cases where it is needed to use them, their values obtained in the model with the minimal supersymmetric extension of the standard model (MSSM) are taken. 29 refs.; 1 tab

Observation of red electroluminescence from an Eu2O3/ p +-Si device and improved performance by introducing a Tb2O3 layer

International Nuclear Information System (INIS)

Yin, Xue; Wang, Shenwei; Mu, Guangyao; Wan, Guangmiao; Huang, Miaoling; Yi, Lixin

2017-01-01

We report red electroluminescence (EL) from an Eu 2 O 3 / p + -Si device with Eu 2 O 3 film annealed in oxygen ambient at 700 °C. The red EL is ascribed to the characteristic emissions of Eu 3+ ions in Eu 2 O 3 film and the luminescence mechanism is discussed in detail. In order to optimize the device performance, Eu 2 O 3 /Tb 2 O 3 multiple films were deposited on Si wafer, and the result showed EL intensity of the device was obviously enhanced and the turn-on voltage was reduced to about 10 V. Moreover, intensity ratio I ( 5 D 0 – 7 F 2 )/ I ( 5 D 0 – 7 F 1 ) was also significantly increased with the hypersensitive transition 5 D 0 – 7 F 2 as the most prominent group at about 611 nm. The improved performance was attributed to the added Tb 2 O 3 film that it can be served as the hole-injection layer to afford extra holes injected into the Eu 2 O 3 layer. (paper)

Moessbauer study in the glass system PbO. 2B/sub 2/O/sub 3/. Fe/sub 2/O/sub 3/

Energy Technology Data Exchange (ETDEWEB)

Sekhon, S S; Kamal, R [Punjabi Univ., Patiala (India). Dept. of Physics

1978-05-01

The Moessbauer technique has been employed to study the structure and crystallite formation in the glass system PbO.2B/sub 2/O/sub 3/ containing upto 30 wt% Fe/sub 2/O/sub 3/. Like alkali borate glasses, this glass system also exhibits a broadened quadrupole doublet and iron ions are present in Fe/sup 3 +/ state. Above about 20 wt%, the crystallites of magnetically ordered states have been identified. Susceptibility variation with concentration suggests the formation of a superparamagnetic state.

Monoscopic photogrammetry to obtain 3D models by a mobile device: a method for making facial prostheses.

Science.gov (United States)

Salazar-Gamarra, Rodrigo; Seelaus, Rosemary; da Silva, Jorge Vicente Lopes; da Silva, Airton Moreira; Dib, Luciano Lauria

2016-05-25

The aim of this study is to present the development of a new technique to obtain 3D models using photogrammetry by a mobile device and free software, as a method for making digital facial impressions of patients with maxillofacial defects for the final purpose of 3D printing of facial prostheses. With the use of a mobile device, free software and a photo capture protocol, 2D captures of the anatomy of a patient with a facial defect were transformed into a 3D model. The resultant digital models were evaluated for visual and technical integrity. The technical process and resultant models were described and analyzed for technical and clinical usability. Generating 3D models to make digital face impressions was possible by the use of photogrammetry with photos taken by a mobile device. The facial anatomy of the patient was reproduced by a *.3dp and a *.stl file with no major irregularities. 3D printing was possible. An alternative method for capturing facial anatomy is possible using a mobile device for the purpose of obtaining and designing 3D models for facial rehabilitation. Further studies must be realized to compare 3D modeling among different techniques and systems. Free software and low cost equipment could be a feasible solution to obtain 3D models for making digital face impressions for maxillofacial prostheses, improving access for clinical centers that do not have high cost technology considered as a prior acquisition.

CAS-3 H - a device for tritium monitoring

International Nuclear Information System (INIS)

Corbu, N.; Popescu, I. V.; Bucur, C.

2001-01-01

The equipment for tritium monitoring is designed to continuous sampling of tritium from working places in nuclear power plants (NPP) or from plants' surroundings. Its construction allows continuous function in free atmosphere during 8 hours, it is protected against environment factors by support beg, while its components are made from stainless steel or corrosion resistant materials. Inside and surroundings of NPP tritium can exist in different form. The most important tritium quantity (over 90%) are in form of tritiated water, and in form of free hydrogen (less than 10% in closed rooms inside NPP), as well as, in a very small quantity in form of chemical organic tritiated combinations (less than 1%). Tritium sampling from indoor following a mixing phase is considered a simply and fast method. Even this method isn't too precise it requires short time for determination. This is a big advantage because inside NPP the momentary evolution of tritium concentration must be known to be able to take adequate measures. Constructive data for this device are: - dimensions, length x width x height, 470 x 410 x 130 mm; - supply, 2,5 V c.c.; - maxim power consumed, 5 W/h - weight, max. 6 kg. Device main components are: - dry mini-pump with double membrane that ensures a nominal debit upper then necessary, of 12 l/h air at a depression of least 20 mm Hg; - electrical engine with supply tension of 2.5 V c.c., and revolution of 500 rev/min, that acts the pump. Engine power is about 5 W; - filter used as device's shield against particles from air; - revmeter type ROTROM-I.D-PTFE, for air debit measurement by mixing vessels, with measure scale between 4 and 27 Nl/h air; - two mixing vessels made of glass with active capacity of 100 ml; - 28 photoelectric cells placed over support beg, that ensures accumulator charging, thus allowing an increased autonomy in time for device function; - two accumulators type R20 with tension of 1.25 V and minimum intensity of 4 A; - support beg

Order reconstruction phenomena and temperature-driven dynamics in a 3D zenithally bistable device

KAUST Repository

Raisch, A.

2014-07-01

We model the zenithally bistable device (ZBD) in three dimensions (3D), within the Landau-de Gennes theory, and find three stable static states in 3D without an applied field: the vertically aligned nematic (VAN) state, the hybrid aligned nematic (HAN) state and a third, high-tilt state, which we call the THAN state, with an interior and a surface defect. We recover the order reconstruction (OR) phenomenon around the defects in the HAN and THAN states and the 3D THAN and HAN solutions exhibit stable biaxial cylinders connecting defects on opposite faces of the ZBD device. We demonstrate a two-way temperature-driven switching between high-tilt and low-tilt states through controlled heating and cooling procedures in two dimensions (2D), with no applied fields. © CopyrightEPLA, 2014.

Thermomchromic Reaction-Induced Reversible Upconversion Emission Modulation for Switching Devices and Tunable Upconversion Emission Based on Defect Engineering of WO3:Yb3+,Er3+ Phosphor.

Science.gov (United States)

Ruan, Jiufeng; Yang, Zhengwen; Huang, Anjun; Zhang, Hailu; Qiu, Jianbei; Song, Zhiguo

2018-05-02

Reversible luminescence modulation of upconversion phosphors has the potential applications as photoswitches and optical memory and data storage devices. Previously, the photochromic reaction was extensively used for the realization of reversible luminescence modulation. It is very necessary to develop other approaches such as thermomchromic reaction to obtain the reversible upconversion luminescence modulation. In this work, the WO 3 :Yb 3+ ,Er 3+ phosphors with various colors were prepared at various temperatures, exhibiting tunable upconversion luminescence attributed to the formation of oxygen vacancies in the host. Upon heat treatment in the reducing atmosphere or air, the WO 3 :Yb 3+ ,Er 3+ phosphors show a reversible thermomchromic property. The reversible upconversion luminescence modulation of WO 3 :Yb 3+ ,Er 3+ phosphors was observed based on thermomchromic reaction. Additionally, the upconversion luminescence modulation is maintained after several cycles, indicating its excellent stability. The WO 3 :Yb 3+ ,Er 3+ phosphors with reversible upconversion luminescence and excellent reproducibility have potential applications as the photoswitches and optical memory and data storage devices.

Fabrication and Characterization of Bi2Te3-Based Chip-Scale Thermoelectric Energy Harvesting Devices

Science.gov (United States)

Cornett, Jane; Chen, Baoxing; Haidar, Samer; Berney, Helen; McGuinness, Pat; Lane, Bill; Gao, Yuan; He, Yifan; Sun, Nian; Dunham, Marc; Asheghi, Mehdi; Goodson, Ken; Yuan, Yi; Najafi, Khalil

2017-05-01

Thermoelectric energy harvesters convert otherwise wasted heat into electrical energy. As a result, they have the potential to play a critical role in the autonomous wireless sensor network signal chain. In this paper, we present work carried out on the development of Bi2Te3-based thermoelectric chip-scale energy harvesting devices. Process flow, device demonstration and characterization are highlighted.

Exploring the Inert Doublet Model through the dijet plus missing transverse energy channel at the LHC

Directory of Open Access Journals (Sweden)

P. Poulose

2017-02-01

Full Text Available In this study of the Inert Doublet Model (IDM, we propose that the dijet + missing transverse energy channel at the Large Hadron Collider (LHC will be an effective way of searching for the scalar particles of the IDM. This channel receives contributions from gauge boson fusion, and t-channel production, along with contributions from H+ associated production. We perform the analysis including study of the Standard Model (SM background with assumed systematic uncertainty, and optimise the selection criteria employing suitable cuts on the kinematic variables to maximise the signal significance. We find that with high luminosity option of the LHC, this channel has the potential to probe the IDM in the mass range of up to about 400 GeV, which is not accessible through other leptonic channels. In a scenario with light dark matter of mass about 65 GeV, charged Higgs in the mass range of around 200 GeV provides the best possibility with a signal significance of about 2σ at an integrated luminosity of about 3000 fb−1.

p p →A →Z h and the wrong-sign limit of the two-Higgs-doublet model

Science.gov (United States)

Ferreira, Pedro M.; Liebler, Stefan; Wittbrodt, Jonas

2018-03-01

We point out the importance of the decay channels A →Z h and H →V V in the wrong-sign limit of the two-Higgs-doublet model (2HDM) of type II. They can be the dominant decay modes at moderate values of tan β , even if the (pseudo)scalar mass is above the threshold where the decay into a pair of top quarks is kinematically open. Accordingly, large cross sections p p →A →Z h and p p →H →V V are obtained and currently probed by the LHC experiments, yielding conclusive statements about the remaining parameter space of the wrong-sign limit. In addition, mild excesses—as recently found in the ATLAS analysis b b ¯→A →Z h —could be explained. The wrong-sign limit makes other important testable predictions for the light Higgs boson couplings.

Doublet tracer tests to determine the contaminant flushing properties of a municipal solid waste landfill.

Science.gov (United States)

Woodman, N D; Rees-White, T C; Beaven, R P; Stringfellow, A M; Barker, J A

2017-08-01

This paper describes a programme of research investigating horizontal fluid flow and solute transport through saturated municipal solid waste (MSW) landfill. The purpose is to inform engineering strategies for future contaminant flushing. Solute transport between injection/abstraction well pairs (doublets) is investigated using three tracers over five separate tests at well separations between 5m and 20m. Two inorganic tracers (lithium and bromide) were used, plus the fluorescent dye tracer, rhodamine-WT. There was no evidence for persistent preferential horizons or pathways at the inter-well scale. The time for tracer movement to the abstraction wells varied with well spacing as predicted for a homogeneous isotropic continuum. The time for tracer movement to remote observation wells was also as expected. Mobile porosity was estimated as ~0.02 (~4% of total porosity). Good fits to the tracer breakthrough data were achieved using a dual-porosity model, with immobile regions characterised by block diffusion timescales in the range of about one to ten years. This implies that diffusional exchanges are likely to be very significant for engineering of whole-site contaminant flushing and possibly rate-limiting. Copyright © 2017. Published by Elsevier B.V.

Magnetic phase transitions in two-dimensional frustrated Cu3R(SeO3)2O2Cl. Spectroscopic study

Science.gov (United States)

Klimin, S. A.; Budkin, I. V.

2017-01-01

Using optical study of electronic spectra of rare-earth (RE) ions, magnetic phase transitions in the low-dimensional frustrated RE magnets Cu3R(SeO3)2O2Cl (R = Sm, Yb, Er, Nd, Pr, Eu) were investigated. Phase transitions were registered either by splittings of crystal-field (CF) doublets or by repulsion of CF levels of f-ions in a staggered magnetic field. Different scenarios of magnetic order in isostructural compounds of the francisite family are discussed.

Assessment of RELAP5 MOD3.3 and CATHARE 2 V1.5A against a full scale test of PERSEO device

International Nuclear Information System (INIS)

Bianchi, F.; Meloni, P.; Ferri, R.; Achilli, A.

2004-01-01

PERSEO device was developed in the framework of a domestic research program on innovative safety systems, with the purpose to increase the reliability of passive Decay Heat Removal Systems implementing in-pool heat exchangers. The device was tested at SIET Thermal-hydraulic Research Centre by modifying the existing PANTHERS IC-PCC facility. Two types of tests were performed: integral tests and stability tests. The experimental data acquired in the test campaign allowed a validation of a RELAP5/mod 3.3 beta release and CATHARE2 V1.5a/Mod8.1 full scale model of the PERSEO device. The paper deals with the comparison between the two codes against an integral test considered representative from the point of view of the PERSEO functioning and it highlights capabilities and limits of the codes in simulating such kind of test. (authors)

The minimal extension of the Standard Model with S3 symmetry

International Nuclear Information System (INIS)

Lee, C.E.; Lin, C.; Yang, Y.W.

1991-01-01

In this paper the two Higgs-doublet extension of the standard electroweak model with S 3 symmetry is presented. The flavour changing neutral Higgs interaction are automatically absent. A permutation symmetry breaking scheme is discussed. The correction to the Bjorken's approximation and the CP-violation factor J are given within this scheme

Study of crystal-field excitations and Raman active phonons in o-DyMnO3

International Nuclear Information System (INIS)

Jandl, S.; Mansouri, S.; Mukhin, A.A.; Yu Ivanov, V.; Balbashov, A.; Gospodino, M.M.; Nekvasil, V.; Orlita, M.

2011-01-01

In DyMnO 3 orthorhombic single crystals, the weak Raman active phonon softening below T=100 K is correlated with the study of infrared active Dy 3+ CF excitations as a function of temperature and under applied magnetic field. We detect five H 13/2 CF transitions that we predict with appropriate CF Hamiltonian and we confirm that the magnetic easy axis lies in the ab plane. While the CF energy level shifts below T=100 K reflect different displacements of the oxygen ions that contribute to the phonon softening, lifting of the ground state Kramers doublet degeneracy (∼30 cm -1 ) is observed below T N =39 K due to the anisotropic Mn 3+ -Dy 3+ interaction, which could be responsible for the stability of the bc-cycloid ferroelectric phase. - Research highlights: → Origin of Raman active phonon softening in the multiferroic o-DyMnO 3 . → A crystal-field study under magnetic field of Dy 3+ in o-DyMnO 3 . → Location of the magnetic easy axis in o-DyMnO 3 . → Lifting of Kramers doublet degeneracy in o-DyMnO 3 .

Scaling of energy confinement with minor radius, current and density in Doublet III Ohmically heated plasmas

International Nuclear Information System (INIS)

Ejima, S.; Petrie, T.W.; Riviere, A.C.

1982-01-01

The dependence of plasma energy confinement on minor radius, density and plasma current is described for Ohmically heated near-circular plasmas in Doublet III. A wide range of parameters is used for the study of scaling laws; the plasma minor radius defined by the flux surface in contact with limiter is varied by a factor of 2 (a = 44, 32, and 23 cm), the line average plasma density, nsub(e)-bar, is varied by a factor of 20 from 0.5 to 10 x 10 13 cm -3 (nsub(e)-bar R 0 /Bsub(T) = 0.3 to 6 x 10 14 cm -2 .kG -1 ) and the plasma current, I, is varied by a factor of 6 from 120 to 718 kA. The range of the limiter safety factor, qsub(L), is from 2 to 12. - For plasmas with a = 23 and 32 cm, the scaling law at low nsub(e)-bar for the gross electron energy confinement time can be written as (s, cm) tausub(Ee)sup(G) approx.= 3.6 x 10 -19 nsub(e)-bar a 2 qsub(c)sup(3/4), where qsub(c) = 2πa 2 Bsub(T)/μ 0 IR 0 . For the 44-cm plasmas, tausub(Ee)sup(G) is about 1.8 times less than predicted by this scaling, possibly owing to the change in limiter configuration and small plasma-wall separation and/or the aspect ratio change. At high nsub(e)-bar, tausub(Ee)sup(G) saturates and in many cases decreases with nsub(e)-bar but increases with I in a classical-like manner. The dependence of tausub(Ee)sup(G) on a is considerably weakened. The confinement behaviour can be explained by taking an ion thermal conductivity 2 to 7 times that given by Hinton-Hazeltine's neoclassical theory with a lumped-Zsub(eff) impurity model. Within this range the enhancement factor increases with a or a/R 0 . The electron thermal conductivity evaluated at half-temperature radius where most of the thermal insulation occurs sharply increases with average current density within that radius, but does not depend on a within the uncertainties of the measurements. (author)

Pharmacological properties of homomeric and heteromeric GluR1o and GluR3o receptors

DEFF Research Database (Denmark)

Nielsen, B S; Banke, T G; Schousboe, A

1998-01-01

Homomeric and heteromeric alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionate (AMPA) receptor subunits GluR1o and GluR3o were expressed in Spodoptera frugiperda (Sf9) insect cells. Membranes containing the recombinant receptors showed a doublet of bands of the expected size (99-109 kDa) after...

Study of 3D printing method for GRIN micro-optics devices

Science.gov (United States)

Wang, P. J.; Yeh, J. A.; Hsu, W. Y.; Cheng, Y. C.; Lee, W.; Wu, N. H.; Wu, C. Y.

2016-03-01

Conventional optical elements are based on either refractive or reflective optics theory to fulfill the design specifications via optics performance data. In refractive optical lenses, the refractive index of materials and radius of curvature of element surfaces determine the optical power and wavefront aberrations so that optical performance can be further optimized iteratively. Although gradient index (GRIN) phenomenon in optical materials is well studied for more than a half century, the optics theory in lens design via GRIN materials is still yet to be comprehensively investigated before realistic GRIN lenses are manufactured. In this paper, 3D printing method for manufacture of micro-optics devices with special features has been studied based on methods reported in the literatures. Due to the additive nature of the method, GRIN lenses in micro-optics devices seem to be readily achievable if a design methodology is available. First, derivation of ray-tracing formulae is introduced for all possible structures in GRIN lenses. Optics simulation program is employed for characterization of GRIN lenses with performance data given by aberration coefficients in Zernike polynomial. Finally, a proposed structure of 3D printing machine is described with conceptual illustration.

Safety analysis of an irradiation device for 99Mo production in RA-3 reactor

International Nuclear Information System (INIS)

Lerner, Ana Maria; Madariaga, Marcelo; Waldman, Ricardo

2000-01-01

The Argentine RA-3 research reactor (5 MW) has been converted to LEU fuel more than nine years ago. Since then, it has been operating with LEU fuel, which has been designed and fabricated at the National Atomic Energy Commission (CNEA). The Nuclear Regulatory Authority (ARN) is the institution in charge of the installation safety control. It is under this framework that the ARN has elaborated a neutronic calculation model for the RA-3 core, paying special attention to the device presently used for the irradiation of (HEU) 235 U targets required to obtain 9 '9Mo as a fission product. A regulatory analysis of results is carried out in the framework of ARN standards for fixed experiments. For such purpose, calculated reactivity values associated with such device are compared with recently measured values at the installation. Finally, and according to guidelines established in the first part of this work, a calculation model for a new device proposed by CNEA for the irradiation of metallic (LEU) uranium targets and still at its design stage, is here analysed. (author)

BiFeO3 epitaxial thin films and devices: past, present and future

Science.gov (United States)

Sando, D.; Barthélémy, A.; Bibes, M.

2014-11-01

The celebrated renaissance of the multiferroics family over the past ten years has also been that of its most paradigmatic member, bismuth ferrite (BiFeO3). Known since the 1960s to be a high temperature antiferromagnet and since the 1970s to be ferroelectric, BiFeO3 only had its bulk ferroic properties clarified in the mid-2000s. It is however the fabrication of BiFeO3 thin films and their integration into epitaxial oxide heterostructures that have fully revealed its extraordinarily broad palette of functionalities. Here we review the first decade of research on BiFeO3 films, restricting ourselves to epitaxial structures. We discuss how thickness and epitaxial strain influence not only the unit cell parameters, but also the crystal structure, illustrated for instance by the discovery of the so-called T-like phase of BiFeO3. We then present its ferroelectric and piezoelectric properties and their evolution near morphotropic phase boundaries. Magnetic properties and their modification by thickness and strain effects, as well as optical parameters, are covered. Finally, we highlight various types of devices based on BiFeO3 in electronics, spintronics, and optics, and provide perspectives for the development of further multifunctional devices for information technology and energy harvesting.

Device characteristics of organic light-emitting diodes based on electronic structure of the Ba-doped Alq3 layer.

Science.gov (United States)

Lim, Jong Tae; Kim, Kyung Nam; Yeom, Geun Young

2009-12-01

Organic light-emitting diodes (OLEDs) with a Ba-doped tris(8-quinolinolato)aluminum(III) (Alq3) layer were fabricated to reduce the barrier height for electron injection and to improve the electron conductivity. In the OLED consisting of glass/ITO/4,4',4"-tris[2-naphthylphenyl-1-phenylamino]triphenylamine (2-TNATA, 30 nm)/4,4'-bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (NPB, 18 nm)/Alq3 (42 nm)/Ba-doped Alq3 (20 nm, x%: x = 0, 10, 25, and 50)/Al (100 nm), the device with the Alq3 layer doped with 10% Ba showed the highest light out-coupling characteristic. However, as the Ba dopant concentration was increased from 25% to 50%, this device characteristic was largely reduced. The characteristics of these devices were interpreted on the basis of the chemical reaction between Ba and Alq3 and the electron injection property by analyzing the electronic structure of the Ba-doped Alq3 layer. At a low Ba doping of 10%, mainly the Alq3 radical anion species was formed. In addition, the barrier height for electron injection in this layer was decreased to 0.6 eV, when compared to the pristine Alq3 layer. At a high Ba doping of 50%, the Alq3 molecules were severely decomposed. When the Ba dopant concentration was changed, the light-emitting characteristics of the devices were well coincided with the formation mechanism of Alq3 radical anion and Alq3 decomposition species.

Dependence of Acetate-Based Antisolvents for High Humidity Fabrication of CH3NH3PbI3 Perovskite Devices in Ambient Atmosphere.

Science.gov (United States)

Yang, Fu; Kapil, Gaurav; Zhang, Putao; Hu, Zhaosheng; Kamarudin, Muhammad Akmal; Ma, Tingli; Hayase, Shuzi

2018-05-16

High-efficiency perovskite solar cells (PSCs) need to be fabricated in the nitrogen-filled glovebox by the atmosphere-controlled crystallization process. However, the use of the glovebox process is of great concern for mass level production of PSCs. In this work, notable efficient CH 3 NH 3 PbI 3 solar cells can be obtained in high humidity ambient atmosphere (60-70% relative humidity) by using acetate as the antisolvent, in which dependence of methyl, ethyl, propyl, and butyl acetate on the crystal growth mechanism is discussed. It is explored that acetate screens the sensitive perovskite intermediate phases from water molecules during perovskite film formation and annealing. It is revealed that relatively high vapor pressure and high water solubility of methyl acetate (MA) leads to the formation of highly dense and pinhole free perovskite films guiding to the best power conversion efficiency (PCE) of 16.3% with a reduced hysteresis. The devices prepared using MA showed remarkable shelf life stability of more than 80% for 360 h in ambient air condition, when compared to the devices fabricated using other antisolvents with low vapor pressure and low water solubility. Moreover, the PCE was still kept at 15.6% even though 2 vol % deionized water was added in the MA for preparing the perovskite layer.

The effect of a single blade limiter on energetic neutral beam particles in Doublet III

International Nuclear Information System (INIS)

Petrie, T.W.; Armentrout, C.; Burrell, K.H.; Hino, T.; Kahn, C.; Kim, J.; Lohr, J.; Rottler, L.; Schissel, D.; St John, H.

1984-01-01

Energetic beam ion collisions with the main limiter can be a significant power loss process under certain operating conditions in Doublet III. Futhermore, these collisions may cause measurable damage to the limiter itself. Under low current and low toroidal field conditions (e.g., Isub(p) = 290 kA and Bsub(T) = 6.3 kG), 20-38% of the inferred absorbed beam power may be deposited directly on the ion drift side of the limiter by the beam ions. However, for higher plasma current and toroidal fields (e.g., Isub(p) = 480 kA and Bsub(t) = 15 kG), the fraction of inferred absorbed beam power deposited on the limiter is reduced to < 10%. Monte Carlo code simulations show that this loss of beam power is primarily a result of the large poloidal and toroidal gyro-orbits of the energetic beam ions. Other factors which may enhance beam ion losses to the limiter are (1) large separation distances between the primary limiter and the (outboard) vacuum vessel wall, and (2) plasma density buildup near the plasma edge during high gas puff operation. In addition, our data suggests enhanced plasma density and recycling near the limiter. This localized density can cause appreciable premature ionizations of the incoming beam neutrals and thus reduce the effective plasma heating of the beamline which is immediately upcurrent of the limiter. The prematurely-ionized beam particles from this adjacent beamline are responsible for much of the damage to the ion drift side of the limiter. We have found that under certain operating conditions (1) the direct beam heating of the limiter is 50% greater and (2) the stored plasma energy is 10% less when the beamline immediately upcurrent of the limiter heats the plasma. Thus, the relative positions of the limiters to the beamlines are important in designing future tokamaks. (orig.)

Evaluation of 3D laser device for characterizing shape and surface properties of aggregates used in pavements

CSIR Research Space (South Africa)

Anochie-Boateng, Joseph

2010-08-01

Full Text Available program for the 3D laser device using fifteen different spherical and twelve cubic shaped objects. The laser device was evaluated for accuracy and repeatability to compute aggregate surface area and volume properties. The results showed that the laser...

Properties study of LiNbO3 lateral field excited device working on thickness extension mode

International Nuclear Information System (INIS)

Zhi-Tian, Zhang; Ting-Feng, Ma; Chao, Zhang; Wen-Yan, Wang; Yan, Liu; Guan-Ping, Feng

2010-01-01

This paper investigates the properties of thickness extension mode excited by lateral electric field on LiNbO 3 by using the extended Christoffel–Bechmann method. It finds that the lateral field excitation coupling factor for a-mode (quasi-extensional mode) reaches its maximum value of 28% on X-cut LiNbO 3 . The characteristics of a lateral field excitation device made of X-cut LiNbO 3 have been investigated and the lateral field excitation device is used for the design of a high frequency ultrasonic transducer. The time and frequency domain pulse/echo response of the LiNbO 3 lateral field excitation ultrasonic transducer is analysed with the modified Krimholtz–Leedom–Matthae model and tested using traditional pulse/echo method. A LiNbO 3 lateral field excitation ultrasonic transducer with the centre frequency of 33.44 MHz and the −6 dB bandwidth of 33.8% is acquired, which is in good agreement with the results of the Krimholtz–Leedom–Matthae model. Further analysis suggests that the LiNbO 3 lateral field excitation device has great potential in the design of broadband high frequency ultrasonic transducers. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Novel hybrid light-emitting devices based on MAPbBr3 nanoplatelets:PVK nanocomposites and zinc oxide nanorod arrays

Science.gov (United States)

Wang, Szu-Ping; Chang, Chun-Kai; Yang, Sheng-Hsiung; Chang, Che-Yu; Chao, Yu-Chiang

2018-01-01

In this research, we demonstrate inverted perovskite light-emitting devices (PeLEDs) based on zinc oxide nanorod arrays (ZnO NAs) as the electron transport layer and methylammonium lead bromide nanoplatelets (MAPbBr3 NPLs) as the emissive material for the first time. The polyethyleneimine ethoxylated (PEIE) was inserted between the ZnO NAs and the MAPbBr3 NPLs layer to reduce the energy barrier and improve the electron injection efficiency. Besides, different weight ratios of poly(N-vinylcarbazole) (PVK) were blended with MAPbBr3 NPLs to make evenly dispersed nanocomposite films, thereby enhancing the performance of devices. Meanwhile, the photoluminescence of MAPbBr3 NPLs:PVK nanocomposite film was increased due to reduced self-quenching and prolonged carrier lifetime. Inverted PeLEDs with the configuration of ITO/PEIE-modified ZnO NAs/MAPbBr3 NPLs:PVK/TFB/Au were fabricated and evaluated, using TFB as the hole transport layer. The current density of the devices containing PVK matrix was significantly suppressed compared to those without PVK. Herein, the best device revealed a max brightness of 495 cd m-2 and a low turn-on voltage of 3.1 V that shows potential use in light-emitting applications.

Image Quality of the 3 Dimensional Phase-Contrast Technique in an Intracranial Magnetic Resonance Angiography with Artifacts Caused by Orthodontic Devices: A Comparison with 3 Dimensional Time-of-Flight Technique

Energy Technology Data Exchange (ETDEWEB)

Kang, Seong Jin; Kim, Young Soo; Hong, Hyun Sook [Dept. of Radiology, Soonchunhyang University College of Medicine, Bucheon (Korea, Republic of); Kim, Dong Hun [Dept. of Radiology, Chosun University School of Medicine, Kwangju (Korea, Republic of)

2011-07-15

To evaluate the degree of image distortion caused by orthodontic devices during a intracranial magnetic resonance angiography (MRA), and to determine the effectiveness of the 3 dimensional phase-contrast (3D PC). Subjects were divided into group A (n = 20) wearing a home-made orthodontic device, and group B (n = 10) with an actual orthodontic device. A 3.0T MR scanner was used, applying 3D time-of-flight (TOF) and 3D PC. Two board-certified radiologists evaluated images independently based on a four point scale classifying segments of the circle of Willis. Magnetic susceptibility variations and contrast-to-noise ratio (CNR) on maximum intensity projection images were measured. In group A, scores of the 3D TOF and 3D PC were 2.84 {+-} 0.1 vs. 2.88 {+-} 0.1 (before) and 1.8 {+-} 0.4 vs 2.83 {+-} 0.1 (after wearing device), respectively. In group B, the scores of 3D TOF and 3D PC were 1.86 {+-} 0.43 and 2.81 {+-} 0.15 (p = 0.005), respectively. Magnetic susceptibility variations showed meaningful results after wearing the device (p = 0.0001). CNRs of the 3D PC before and after wearing device were 142.9 {+-} 6.6 vs. 140.8 {+-} 7.2 (p = 0.7507), respectively. In the 3D TOF, CNRs were 324.8 {+-} 25.4 vs. 466.3 {+-} 41.7 (p = 0.0001). The 3D PC may be a solution method for distorted images by magnetic susceptibility in the intracranial MRA compared with 3D TOF.

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

OpenAIRE

Terán-Escobar, Gerardo; Lira-Cantú, Mónica; Krebs, Frederik C.

2012-01-01

Seven distinct sets (n >= 12) of state of the art organic photovoltaic devices were prepared by leading research laboratories in a collaboration planned at the Third International Summit on Organic Photovoltaic Stability (ISOS-3). All devices were shipped to RISO DTU and characterized simultaneously up to 1830 h in accordance with established ISOS-3 protocols under three distinct illumination conditions: accelerated full sun simulation; low level indoor fluorescent lighting; and dark storage ...

Software architecture as a freedom for 3D content providers and users along with independency on purposes and used devices

Science.gov (United States)

Sultana, Razia; Christ, Andreas; Meyrueis, Patrick

2014-05-01

The improvements in the hardware and software of communication devices have allowed running Virtual Reality (VR) and Augmented Reality (AR) applications on those. Nowadays, it is possible to overlay synthetic information on real images, or even to play 3D on-line games on smart phones or some other mobile devices. Hence the use of 3D data for business and specially for education purposes is ubiquitous. Due to always available at hand and always ready to use properties of mobile phones, those are considered as most potential communication devices. The total numbers of mobile phone users are increasing all over the world every day and that makes mobile phones the most suitable device to reach a huge number of end clients either for education or for business purposes. There are different standards, protocols and specifications to establish the communication among different communication devices but there is no initiative taken so far to make it sure that the send data through this communication process will be understood and used by the destination device. Since all the devices are not able to deal with all kind of 3D data formats and it is also not realistic to have different version of the same data to make it compatible with the destination device, it is necessary to have a prevalent solution. The proposed architecture in this paper describes a device and purpose independent 3D data visibility any time anywhere to the right person in suitable format. There is no solution without limitation. The architecture is implemented in a prototype to make an experimental validation of the architecture which also shows the difference between theory and practice.

Half metallic ferromagnet Pr_0_._9_5Mn_0_._9_3_9O_3 for spin based devices

International Nuclear Information System (INIS)

Santhosh Kumar, B.; Praveen Shankar, N.; Venkateswaran, C.; Manimuthu, P.

2016-01-01

Half Metallic Ferromagnets (HMF) are excellent candidates for spintronics devices due to their unusual 3d and 4s bands. Band theory and first principles calculations strongly predict that Pr based compounds are promising HMF candidates due to their spin hybridisation. Among all Pr based HMF, Pr_0_._9_5Mn_0_._9_3_9O_3 is special because of its pervoskite structure. The different oxidation states of Mn and Pr will enhance the hybridisation of 3d and 4f bands. The present study is experimental effort on the preparation of Pr based compounds

NIMROD Simulations of the HIT-SI and HIT-SI3 Devices

Science.gov (United States)

Morgan, Kyle; Jarboe, Tom; Hossack, Aaron; Chandra, Rian; Everson, Chris

2017-10-01

The Helicity Injected Torus with Steady Inductive helicity injection (HIT-SI) experiment uses a set of inductively driven helicity injectors to apply non-axisymmetric current drive on the edge of the plasma, driving an axisymmetric spheromak equilibrium in a central confinement volume. Significant improvements have been made to extended MHD modeling of HIT-SI, with both the resolution of disagreement at high injector frequencies in HIT-SI in addition to successes with the new upgraded HIT-SI3 device. Previous numerical studies of HIT-SI, using a zero-beta eMHD model, focused on operations with a drive frequency of 14.5 kHz, and found reduced agreement with both the magnetic profile and current amplification at higher frequencies (30-70 kHz). HIT-SI3 has three helicity injectors which are able to operate with different mode structures of perturbations through the different relative temporal phasing of the injectors. Simulations that allow for pressure gradients have been performed in the parameter regimes of both devices using the NIMROD code and show improved agreement with experimental results, most notably capturing the observed Shafranov-shift due to increased beta observed at higher finj in HIT-SI and the variety of toroidal perturbation spectra available in HIT-SI3. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Fusion Energy Sciences under Award Number DE-FG02- 96ER54361.

Device Performance of the Mott InsulatorDevice Performance of the Mott Insulator LaVO3 as a Photovoltaic Material

KAUST Repository

Wang, Lingfei

2015-06-22

Searching for solar-absorbing materials containing earth-abundant elements with chemical stability is of critical importance for advancing photovoltaic technologies. Mott insulators have been theoretically proposed as potential photovoltaic materials. In this paper, we evaluate their performance in solar cells by exploring the photovoltaic properties of Mott insulator LaVO3 (LVO). LVO films show an indirect band gap of 1.08 eV as well as strong light absorption over a wide wavelength range in the solar spectrum. First-principles calculations on the band structure of LVO further reveal that the d−d transitions within the upper and lower Mott-Hubbard bands and p−d transitions between the O 2p and V 3d band contribute to the absorption in visible and ultraviolet ranges, respectively. Transport measurements indicate strong carrier trapping and the formation of polarons in LVO. To utilize the strong light absorption of LVO and to overcome its poor carrier transport, we incorporate it as a light absorber in solar cells in conjunction with carrier transporters and evaluate its device performance. Our complementary experimental and theoretical results on such prototypical solar cells made of Mott-Hubbard transition-metal oxides pave the road for developing light-absorbing materials and photovoltaic devices based on strongly correlated electrons.

A new 3-dimensional head fixation device for brain imaging

International Nuclear Information System (INIS)

Goto, Ryoi; Kawashima, Ryuta; Yoshioka, Seiro; Ono, Shuichi; Ito, Hiroshi; Sato, Kazunori; Akaizawa, Takashi; Koyama, Masamichi; Fukuda, Hiroshi

1995-01-01

We have developed a new head fixation device for studies of brain function. This device was designed to immobilize subject's heads during image scanning and to precisely reproduce the head position for two different imaging modalities such as MRI and PET. The device consists of a plastic frame, a pillow filled with beads of styrene foam, and a face mask of thermoplastic resin which was originally intended for application in radiotherapy. A bridge for biting was incorporated into the mask for stable fixation. The device enables immobilization of subject's heads with good reproducibility of position at the practical level. Our results indicate that this head fixation system is useful for fixation of head during activation studies using PET. (author)

9 CFR 312.3 - Official marks and devices to identify inspected and passed equine products.

Science.gov (United States)

2010-01-01

... inspected and passed equine products. 312.3 Section 312.3 Animals and Animal Products FOOD SAFETY AND... § 312.3 Official marks and devices to identify inspected and passed equine products. (a) The official... § 317.2 of this subchapter to identify inspected and passed mule and other (nonhorse) equine carcasses...

U.S. Workshop on the Physics and Chemistry of II-VI Materials (a.k.a. II-VI Workshop) - ARO Research Area 9: Materials Science - Physical Properties of Materials

Science.gov (United States)

2015-12-21

integrated into arrays and can be fabricated on various substrates including glass . This makes it well suited for constructing photodetector-arrays for...energy forming a stable TeO2 , but the Cd 3d doublet remained the same. We also analyzed the diffusion profile of the contact metals that were...The devices in this study were made on Corning® Willow® Glass , which is a highly transparent, flexible, hermetic, and dimensionally stable

Image Quality of the 3 Dimensional Phase-Contrast Technique in an Intracranial Magnetic Resonance Angiography with Artifacts Caused by Orthodontic Devices: A Comparison with 3 Dimensional Time-of-Flight Technique

International Nuclear Information System (INIS)

Kang, Seong Jin; Kim, Young Soo; Hong, Hyun Sook; Kim, Dong Hun

2011-01-01

To evaluate the degree of image distortion caused by orthodontic devices during a intracranial magnetic resonance angiography (MRA), and to determine the effectiveness of the 3 dimensional phase-contrast (3D PC). Subjects were divided into group A (n = 20) wearing a home-made orthodontic device, and group B (n = 10) with an actual orthodontic device. A 3.0T MR scanner was used, applying 3D time-of-flight (TOF) and 3D PC. Two board-certified radiologists evaluated images independently based on a four point scale classifying segments of the circle of Willis. Magnetic susceptibility variations and contrast-to-noise ratio (CNR) on maximum intensity projection images were measured. In group A, scores of the 3D TOF and 3D PC were 2.84 ± 0.1 vs. 2.88 ± 0.1 (before) and 1.8 ± 0.4 vs 2.83 ± 0.1 (after wearing device), respectively. In group B, the scores of 3D TOF and 3D PC were 1.86 ± 0.43 and 2.81 ± 0.15 (p = 0.005), respectively. Magnetic susceptibility variations showed meaningful results after wearing the device (p = 0.0001). CNRs of the 3D PC before and after wearing device were 142.9 ± 6.6 vs. 140.8 ± 7.2 (p = 0.7507), respectively. In the 3D TOF, CNRs were 324.8 ± 25.4 vs. 466.3 ± 41.7 (p = 0.0001). The 3D PC may be a solution method for distorted images by magnetic susceptibility in the intracranial MRA compared with 3D TOF.

2D array transducers for real-time 3D ultrasound guidance of interventional devices

Science.gov (United States)

Light, Edward D.; Smith, Stephen W.

2009-02-01

We describe catheter ring arrays for real-time 3D ultrasound guidance of devices such as vascular grafts, heart valves and vena cava filters. We have constructed several prototypes operating at 5 MHz and consisting of 54 elements using the W.L. Gore & Associates, Inc. micro-miniature ribbon cables. We have recently constructed a new transducer using a braided wiring technology from Precision Interconnect. This transducer consists of 54 elements at 4.8 MHz with pitch of 0.20 mm and typical -6 dB bandwidth of 22%. In all cases, the transducer and wiring assembly were integrated with an 11 French catheter of a Cook Medical deployment device for vena cava filters. Preliminary in vivo and in vitro testing is ongoing including simultaneous 3D ultrasound and x-ray fluoroscopy.

78 FR 958 - Certain Wireless Devices With 3G and/or 4G Capabilities and Components Thereof Notice of Receipt...

Science.gov (United States)

2013-01-07

... INTERNATIONAL TRADE COMMISSION [DN 2929] Certain Wireless Devices With 3G and/or 4G Capabilities... with 3G and/or 4G Capabilities and Components Thereof, DN 2929; the Commission is soliciting comments... importation of certain wireless devices with 3g and/or 4g capabilities and components thereof. The complaint...

Are Portable Stereophotogrammetric Devices Reliable in Facial Imaging? A Validation Study of VECTRA H1 Device.

Science.gov (United States)

Gibelli, Daniele; Pucciarelli, Valentina; Cappella, Annalisa; Dolci, Claudia; Sforza, Chiarella

2018-01-31

Modern 3-dimensional (3D) image acquisition systems represent a crucial technologic development in facial anatomy because of their accuracy and precision. The recently introduced portable devices can improve facial databases by increasing the number of applications. In the present study, the VECTRA H1 portable stereophotogrammetric device was validated to verify its applicability to 3D facial analysis. Fifty volunteers underwent 4 facial scans using portable VECTRA H1 and static VECTRA M3 devices (2 for each instrument). Repeatability of linear, angular, surface area, and volume measurements was verified within the device and between devices using the Bland-Altman test and the calculation of absolute and relative technical errors of measurement (TEM and rTEM, respectively). In addition, the 2 scans obtained by the same device and the 2 scans obtained by different devices were registered and superimposed to calculate the root mean square (RMS; point-to-point) distance between the 2 surfaces. Most linear, angular, and surface area measurements had high repeatability in M3 versus M3, H1 versus H1, and M3 versus H1 comparisons (range, 82.2 to 98.7%; TEM range, 0.3 to 2.0 mm, 0.4° to 1.8°; rTEM range, 0.2 to 3.1%). In contrast, volumes and RMS distances showed evident differences in M3 versus M3 and H1 versus H1 comparisons and reached the maximum when scans from the 2 different devices were compared. The portable VECTRA H1 device proved reliable for assessing linear measurements, angles, and surface areas; conversely, the influence of involuntary facial movements on volumes and RMS distances was more important compared with the static device. Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Large room-temperature tunneling anisotropic magnetoresistance and electroresistance in single ferromagnet/Nb:SrTiO3 Schottky devices.

Science.gov (United States)

Kamerbeek, Alexander M; Ruiter, Roald; Banerjee, Tamalika

2018-01-22

There is a large effort in research and development to realize electronic devices capable of storing information in new ways - for instance devices which simultaneously exhibit electro and magnetoresistance. However it remains a challenge to create devices in which both effects coexist. In this work we show that the well-known electroresistance in noble metal-Nb:SrTiO 3 Schottky junctions can be augmented by a magnetoresistance effect in the same junction. This is realized by replacing the noble metal electrode with ferromagnetic Co. This magnetoresistance manifests as a room temperature tunneling anisotropic magnetoresistance (TAMR). The maximum room temperature TAMR (1.6%) is significantly larger and robuster with bias than observed earlier, not using Nb:SrTiO 3 . In a different set of devices, a thin amorphous AlO x interlayer inserted between Co and Nb:SrTiO 3 , reduces the TAMR by more than 2 orders of magnitude. This points to the importance of intimate contact between the Co and Nb:SrTiO 3 for the TAMR effect. This is explained by electric field enhanced spin-orbit coupling of the interfacial Co layer in contact with Nb:SrTiO 3 . We propose that the large TAMR likely has its origin in the 3d orbital derived conduction band and large relative permittivity of Nb:SrTiO 3 and discuss ways to further enhance the TAMR.

Impact of continuing scaling on the device performance of 3D cylindrical junction-less charge trapping memory

International Nuclear Information System (INIS)

Li Xinkai; Huo Zongliang; Jin Lei; Jiang Dandan; Hong Peizhen; Xu Qiang; Tang Zhaoyun; Li Chunlong; Ye Tianchun

2015-01-01

This work presents a comprehensive analysis of 3D cylindrical junction-less charge trapping memory device performance regarding continuous scaling of the structure dimensions. The key device performance, such as program/erase speed, vertical charge loss, and lateral charge migration under high temperature are intensively studied using the Sentaurus 3D device simulator. Although scaling of channel radius is beneficial for operation speed improvement, it leads to a retention challenge due to vertical leakage, especially enhanced charge loss through TPO. Scaling of gate length not only decreases the program/erase speed but also leads to worse lateral charge migration. Scaling of spacer length is critical for the interference of adjacent cells and should be carefully optimized according to specific cell operation conditions. The gate stack shape is also found to be an important factor affecting the lateral charge migration. Our results provide guidance for high density and high reliability 3D CTM integration. (paper)

Polymer Coatings in 3D-Printed Fluidic Device Channels for Improved Cellular Adherence Prior to Electrical Lysis.

Science.gov (United States)

Gross, Bethany C; Anderson, Kari B; Meisel, Jayda E; McNitt, Megan I; Spence, Dana M

2015-06-16

This paper describes the design and fabrication of a polyjet-based three-dimensional (3D)-printed fluidic device where poly(dimethylsiloxane) (PDMS) or polystyrene (PS) were used to coat the sides of a fluidic channel within the device to promote adhesion of an immobilized cell layer. The device was designed using computer-aided design software and converted into an .STL file prior to printing. The rigid, transparent material used in the printing process provides an optically transparent path to visualize endothelial cell adherence and supports integration of removable electrodes for electrical cell lysis in a specified portion of the channel (1 mm width × 0.8 mm height × 2 mm length). Through manipulation of channel geometry, a low-voltage power source (500 V max) was used to selectively lyse adhered endothelial cells in a tapered region of the channel. Cell viability was maintained on the device over a 5 day period (98% viable), though cell coverage decreased after day 4 with static media delivery. Optimal lysis potentials were obtained for the two fabricated device geometries, and selective cell clearance was achieved with cell lysis efficiencies of 94 and 96%. The bottleneck of unknown surface properties from proprietary resin use in fabricating 3D-printed materials is overcome through techniques to incorporate PDMS and PS.

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 2: User's manual (version 3.0)

Science.gov (United States)

Sidwell, Kenneth W.; Baruah, Pranab K.; Bussoletti, John E.; Medan, Richard T.; Conner, R. S.; Purdon, David J.

1990-01-01

A comprehensive description of user problem definition for the PAN AIR (Panel Aerodynamics) system is given. PAN AIR solves the 3-D linear integral equations of subsonic and supersonic flow. Influence coefficient methods are used which employ source and doublet panels as boundary surfaces. Both analysis and design boundary conditions can be used. This User's Manual describes the information needed to use the PAN AIR system. The structure and organization of PAN AIR are described, including the job control and module execution control languages for execution of the program system. The engineering input data are described, including the mathematical and physical modeling requirements. Version 3.0 strictly applies only to PAN AIR version 3.0. The major revisions include: (1) inputs and guidelines for the new FDP module (which calculates streamlines and offbody points); (2) nine new class 1 and class 2 boundary conditions to cover commonly used modeling practices, in particular the vorticity matching Kutta condition; (3) use of the CRAY solid state Storage Device (SSD); and (4) incorporation of errata and typo's together with additional explanation and guidelines.

Effects on LOCA mass and energy release of the SIT Fluidic device for SKN 3 and 4

International Nuclear Information System (INIS)

Song, Jeung Hyo; Kim, Tae Yoon; Choi, Han Rim; Choi, Chul Jin; Seo, Jong Tae

2003-01-01

A fluidic device is employed for the control of safety injection tank flow during a large break loss of coolant accident in Shin Kori Nuclear power plant Unit 3 and 4. It is installed in the safety injection tank and provides two stages of safety injection tank flow injection, initially high flow injection and then low flow injection after the reactor vessel downcomer annulus full. This allows a more effective use of safety injection tank water inventory during a loss of coolant accident. However, the fluidic device may have an adverse impact on the mass and energy release during the accident. That is, the steam mass and energy release will be increased by a considerable amount because the safety injection tank low flow injection via fluidic device is not credited to condense the steam flows through intact cold legs. The increased mass and energy releases have an impact on the peak pressure and temperature of the containment. This effect of the fluidic device is analyzed on the mass and energy release and the peak pressure and temperature of the containment. The calculation has been done using the CEFLASH-4A, the FLOOD3 with some modifications for the fluidic device and the CONTEMPT-LT code. The results show that the mass and energy release and the peak pressure and temperature were considerably increased when compared with the case without the fluidic device. However, the results satisfy the required design margin

Effects on LOCA mass and energy release of the SIT Fluidic device for SKN 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Song, Jeung Hyo; Kim, Tae Yoon; Choi, Han Rim; Choi, Chul Jin; Seo, Jong Tae [Korea Power Engineering Company, Daejon (Korea, Republic of)

2003-07-01

A fluidic device is employed for the control of safety injection tank flow during a large break loss of coolant accident in Shin Kori Nuclear power plant Unit 3 and 4. It is installed in the safety injection tank and provides two stages of safety injection tank flow injection, initially high flow injection and then low flow injection after the reactor vessel downcomer annulus full. This allows a more effective use of safety injection tank water inventory during a loss of coolant accident. However, the fluidic device may have an adverse impact on the mass and energy release during the accident. That is, the steam mass and energy release will be increased by a considerable amount because the safety injection tank low flow injection via fluidic device is not credited to condense the steam flows through intact cold legs. The increased mass and energy releases have an impact on the peak pressure and temperature of the containment. This effect of the fluidic device is analyzed on the mass and energy release and the peak pressure and temperature of the containment. The calculation has been done using the CEFLASH-4A, the FLOOD3 with some modifications for the fluidic device and the CONTEMPT-LT code. The results show that the mass and energy release and the peak pressure and temperature were considerably increased when compared with the case without the fluidic device. However, the results satisfy the required design margin.

Technical Note: Immunohistochemical evaluation of mouse brain irradiation targeting accuracy with 3D-printed immobilization device

Energy Technology Data Exchange (ETDEWEB)

Zarghami, Niloufar, E-mail: nzargham@uwo.ca; Jensen, Michael D. [Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Talluri, Srikanth; Dick, Frederick A. [Department of Biochemistry, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada); Foster, Paula J. [Imaging Research Laboratories, Robarts Research Institute, 100 Perth Drive, London, Ontario N6A 5K8 (Canada); Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Chambers, Ann F. [Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Oncology, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada); Wong, Eugene [Department of Physics and Astronomy, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Medical Biophysics, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); Department of Oncology, The University of Western Ontario, 1151 Richmond Street, London, Ontario N6A 3K7 (Canada); London Regional Cancer Program, London Health Sciences Centre, 800 Commissioners Road East, London, Ontario N6A 5W9 (Canada)

2015-11-15

Purpose: Small animal immobilization devices facilitate positioning of animals for reproducible imaging and accurate focal radiation therapy. In this study, the authors demonstrate the use of three-dimensional (3D) printing technology to fabricate a custom-designed mouse head restraint. The authors evaluate the accuracy of this device for the purpose of mouse brain irradiation. Methods: A mouse head holder was designed for a microCT couch using CAD software and printed in an acrylic based material. Ten mice received half-brain radiation while positioned in the 3D-printed head holder. Animal placement was achieved using on-board image guidance and computerized asymmetric collimators. To evaluate the precision of beam localization for half-brain irradiation, mice were sacrificed approximately 30 min after treatment and brain sections were stained for γ-H2AX, a marker for DNA breaks. The distance and angle of the γ-H2AX radiation beam border to longitudinal fissure were measured on histological samples. Animals were monitored for any possible trauma from the device. Results: Visualization of the radiation beam on ex vivo brain sections with γ-H2AX immunohistochemical staining showed a sharp radiation field within the tissue. Measurements showed a mean irradiation targeting error of 0.14 ± 0.09 mm (standard deviation). Rotation between the beam axis and mouse head was 1.2° ± 1.0° (standard deviation). The immobilization device was easily adjusted to accommodate different sizes of mice. No signs of trauma to the mice were observed from the use of tooth block and ear bars. Conclusions: The authors designed and built a novel 3D-printed mouse head holder with many desired features for accurate and reproducible radiation targeting. The 3D printing technology was found to be practical and economical for producing a small animal imaging and radiation restraint device and allows for customization for study specific needs.

Technical Note: Immunohistochemical evaluation of mouse brain irradiation targeting accuracy with 3D-printed immobilization device

International Nuclear Information System (INIS)

Zarghami, Niloufar; Jensen, Michael D.; Talluri, Srikanth; Dick, Frederick A.; Foster, Paula J.; Chambers, Ann F.; Wong, Eugene

2015-01-01

Purpose: Small animal immobilization devices facilitate positioning of animals for reproducible imaging and accurate focal radiation therapy. In this study, the authors demonstrate the use of three-dimensional (3D) printing technology to fabricate a custom-designed mouse head restraint. The authors evaluate the accuracy of this device for the purpose of mouse brain irradiation. Methods: A mouse head holder was designed for a microCT couch using CAD software and printed in an acrylic based material. Ten mice received half-brain radiation while positioned in the 3D-printed head holder. Animal placement was achieved using on-board image guidance and computerized asymmetric collimators. To evaluate the precision of beam localization for half-brain irradiation, mice were sacrificed approximately 30 min after treatment and brain sections were stained for γ-H2AX, a marker for DNA breaks. The distance and angle of the γ-H2AX radiation beam border to longitudinal fissure were measured on histological samples. Animals were monitored for any possible trauma from the device. Results: Visualization of the radiation beam on ex vivo brain sections with γ-H2AX immunohistochemical staining showed a sharp radiation field within the tissue. Measurements showed a mean irradiation targeting error of 0.14 ± 0.09 mm (standard deviation). Rotation between the beam axis and mouse head was 1.2° ± 1.0° (standard deviation). The immobilization device was easily adjusted to accommodate different sizes of mice. No signs of trauma to the mice were observed from the use of tooth block and ear bars. Conclusions: The authors designed and built a novel 3D-printed mouse head holder with many desired features for accurate and reproducible radiation targeting. The 3D printing technology was found to be practical and economical for producing a small animal imaging and radiation restraint device and allows for customization for study specific needs

A Study of Dip-Coatable, High-Capacitance Ion Gel Dielectrics for 3D EWOD Device Fabrication

Directory of Open Access Journals (Sweden)

Carlos E. Clement

2017-01-01

Full Text Available We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D electrowetting-on-dielectric (EWOD devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm2 than that of conventional dielectrics such as SiO2. However, the previous spin-coating method used for gel layer deposition poses several issues for 3D EWOD device fabrication, particularly when assembling multiple modules. Not only does the spin-coating process require multiple repetitions per module, but the ion gel layer also comes in risks of damage or contamination due to handling errors caused during assembly. In addition, it was observed that the chemical formulation previously used for the spin-coating method causes the surface defects on the dip-coated gel layers and thus leads to poor EWOD performance. In this paper, we alternatively propose a dip-coating method with modified gel solutions to obtain defect-free, functional ion gel layers without the issues arising from the spin-coating method for 3D device fabrication. A dip-coating approach offers a single-step coating solution with the benefits of simplicity, scalability, and high throughput for deposition of high-capacitance gel layers on non-planar EWOD devices. An ion gel solution was prepared by combining the [EMIM][TFSI] ionic liquid and the [P(VDF-HFP] copolymer at various wt % ratios in acetone solvent. Experimental studies were conducted to fully understand the effects of chemical composition ratios in the gel solution and how varying thicknesses of ion gel and Teflon layers affects EWOD performance. The effectiveness and potentiality of dip-coatable gel layers for 3D EWOD devices have been demonstrated through fabricating 5 × 1 arrayed liquid prisms using a single-step dip-coating method. Each prism module has

Improved electron injection in spin coated Alq3 incorporated ZnO thin film in the device for solution processed OLEDs

Science.gov (United States)

Dasi, Gnyaneshwar; Ramarajan, R.; Thangaraju, Kuppusamy

2018-04-01

We deposit tris-(8-hydroxyquinoline)aluminum (Alq3) incorporated zinc oxide (ZnO) thin films by spin coating method under the normal ambient. It showed the higher transmittance (90% at 550 nm) when compared to that (80% at 550 nm) of spin coated pure ZnO film. SEM studies show that the Alq3 incorporation in ZnO film also enhances the formation of small sized particles arranged in the network of wrinkles on the surface. XRD reveals the improved crystalline properties upon Alq3 inclusion. We fabricate the electron-only devices (EODs) with the structure of ITO/spin coated ZnO:Alq3 as ETL/Alq3 interlayer/LiF/Al. The device showed the higher electron current density of 2.75 mA/cm2 at 12V when compared to that (0.82 mA/cm2 at 12V) of the device using pure ZnO ETL. The device results show that it will be useful to fabricate the low-cost solution processed OLEDs for future lighting and display applications.

3D printed Lego®-like modular microfluidic devices based on capillary driving.

Science.gov (United States)

Nie, Jing; Gao, Qing; Qiu, Jing-Jiang; Sun, Miao; Liu, An; Shao, Lei; Fu, Jian-Zhong; Zhao, Peng; He, Yong

2018-03-12

The field of how to rapidly assemble microfluidics with modular components continuously attracts researchers' attention, however, extra efforts must be devoted to solving the problems of leaking and aligning between individual modules. This paper presents a novel type of modular microfluidic device, driven by capillary force. There is no necessity for a strict seal or special alignment, and its open structures make it easy to integrate various stents and reactants. The key rationale for this method is to print different functional modules with a low-cost three-dimensional (3D) printer, then fill the channels with capillary materials and assemble them with plugs like Lego ® bricks. This rapidly reconstructed modular microfluidic device consists of a variety of common functional modules and other personalized modules, each module having a unified standard interface for easy assembly. As it can be printed by a desktop 3D printer, the manufacturing process is simple and efficient, with controllable regulation of the flow channel scale. Through diverse combinations of different modules, a variety of different functions can be achieved, without duplicating the manufacturing process. A single module can also be taken out for testing and analysis. What's more, combined with basic circuit components, it can serve as a low-cost Lego ® -like modular microfluidic circuits. As a proof of concept, the modular microfluidic device has been successfully demonstrated and used for stent degradation and cell cultures, revealing the potential use of this method in both chemical and biological research.

Fused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication : Procedures, Materials, and Applications

NARCIS (Netherlands)

Salentijn, Gert Ij; Oomen, Pieter E; Grajewski, Maciej; Verpoorte, Elisabeth