WorldWideScience

Sample records for doppler effect measurements

  1. Influence of speckle effect on doppler velocity measurement

    Science.gov (United States)

    Zheng, Zheng; Changming, Zhao; Haiyang, Zhang; Suhui, Yang; Dehua, Zhang; Xingyuan, Zheng; Hongzhi, Yang

    2016-06-01

    In a coherent Lidar system, velocity measurement of a target is achieved by measuring Doppler frequency shift between the echo and local oscillator (LO) signals. The measurement accuracy is proportional to the spectrum width of Doppler signal. Actually, the speckle effect caused by the scattering of laser from a target will broaden the Doppler signal's spectrum and bring uncertainty to the velocity measurement. In this paper, a theoretical model is proposed to predict the broadening of Doppler spectrum with respect to different target's surface and motion parameters. The velocity measurement uncertainty caused by the broadening of spectrum is analyzed. Based on the analysis, we design a coherent Lidar system to measure the velocity of the targets with different surface roughness and transverse velocities. The experimental results are in good agreement with theoretical analysis. It is found that the target's surface roughness and transverse velocity can significantly affect the spectrum width of Doppler signal. With the increase of surface roughness and transverse velocity, the measurement accuracy becomes worse. However, the influence of surface roughness becomes weaker when the spot size of laser beam on the target is smaller.

  2. Velocity Measurement Based on Laser Doppler Effect

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yan-Yan; HUO Yu-Jing; HE Shu-Fang; GONG Ke

    2010-01-01

    @@ A novel method for velocity measurement is presented.In this scheme,a parallel-linear-polarization dualfrequency laser is incident on the target and senses the target velocity with both the frequencies,which can increase the maximum measurable velocity significantly.The theoretical analysis and verification experiment of the novel method are presented,which show that high-velocity measurement can be achieved with high precision using this method.

  3. Dead time effects in laser Doppler anemometry measurements

    DEFF Research Database (Denmark)

    Velte, Clara Marika; Buchhave, Preben; George, William K.

    2014-01-01

    We present velocity power spectra computed by the so-called direct method from burst-type laser Doppler anemometer (LDA) data, both measured in a turbulent round jet and generated in a computer. Using today’s powerful computers, we have been able to study more properties of the computed spectra...... frequency range, starting around the cutoff frequency due to the finite size of the MV. Using computer-generated data mimicking the LDA data, these effects have previously been shown to appear due to the effect of dead time, i.e., the finite time during which the system is not able to acquire new...... measurements. These dead times can be traced back to the fact that the burst-mode LDA cannot measure more than one signal burst at a time. Since the dead time is approximately equal to the residence time for a particle traversing a measurement volume, we are dealing with widely varying dead times, which...

  4. Direct measurement of Lorentz transformation with Doppler effects

    Science.gov (United States)

    Chen, Shao-Guang

    For space science and astronomy the fundamentality of one-way velocity of light (OWVL) is selfevident. The measurement of OWVL (distance/interval) and the clock synchronization with light-signal transfer make a logical circulation. This means that OWVL could not be directly measured but only come indirectly from astronomical method (Romer's Io eclipse and Bradley's sidereal aberration), furthermore, the light-year by definitional OWVL and the trigonometry distance with AU are also un-measurable. For to solve this problem two methods of clock synchronization were proposed: The direct method is that at one end of dual-speed transmissionline with single clock measure the arriving-time difference of longitudinal wave and transverse wave or ordinary light and extraordinary light, again to calculate the collective sending-time of two wave with Yang's /shear elastic-modulus ratio (E/k) or extraordinary/ordinary light refractive-index ratio (ne/no), which work as one earthquake-station with single clock measures first-shake time and the distance to epicenter; The indirect method is that the one-way wavelength l is measured by dual-counters Ca and Cb and computer's real-time operation of reading difference (Nb - Na) of two counters, the frequency f is also simultaneously measured, then l f is just OWVL. Therefore, with classical Newtonian mechanics and ether wave optics, OWVL can be measured in the Galileo coordinate system with an isotropic length unit (1889 international meter definition). Without any hypotheses special relativity can entirely establish on the metrical results. When a certain wavelength l is defined as length unit, foregoing measurement of one-way wavelength l will become as the measurement of rod's length. Let a rigidity-rod connecting Ca and Cb moves relative to lamp-house with velocity v, rod's length L = (Nb - Na) l will change follow v by known Doppler effect, i.e., L(q) =L0 (1+ (v/c) cos q), where L0 is the proper length when v= 0, v• r = v cos q

  5. Improved technique for blood flow velocity measurement using Doppler effect

    Science.gov (United States)

    Valadares Oliveira, Eduardo J.; Nantes Button, Vera L. d. S.; Maia, Joaquim M.; Costa, Eduardo T.

    2002-04-01

    The Doppler velocimeter developed allows to determine the angle between the ultrasonic beam and the velocity vector of the flow, and to calculate the precise blood flow in a vessel. Four piezoelectric transducers constitute the Doppler velocimeter. Three of these transducers are positioned to form an equilateral triangle (base of a pyramid). When these transducers move simultaneously, backward or forward from the initial position, the emitted ultrasonic beams focalize on a position (peak of the pyramid) closer or farther from the transducers faces, according to the depth of the vessel where we intend to measure de flow. The angle between the transducers allows adjusting the height of this pyramid and the position of the focus (where the three beams meet). A forth transducer is used to determine the diameter of the vessel and monitor the position of the Doppler velocimeter relative to the vessel. Simulation results showed that with this technique is possible to accomplish precise measurement of blood flow.

  6. Unidirectional Rotation of Molecules Measured by the Rotational Doppler Effect

    Directory of Open Access Journals (Sweden)

    Prior Yehiam

    2013-03-01

    Full Text Available A pair of linearly polarized pump pulses induce field-free unidirectional molecular rotation, which is detected by a delayed circularly polarized probe. The polarization and spectrum of the probe are modified by the interaction with the molecules, in accordance with the Rotational Doppler Effect.

  7. The Effect of Amplitude Modulation on the Axial Resolution of Doppler-Based Ultrasonic Topography Measurement

    DEFF Research Database (Denmark)

    RezaNejad Gatabi, Javad; Das, Sayantan; Forouzbakhsh, Farshid

    2016-01-01

    of the Doppler measurement techniques. A modified Doppler measurement system that significantly improves the measurement accuracy is also presented. The fabricated sensor has 72-μm measurement accuracy using 40-kHz transducers. This technique can also be employed in cost-effective displacement measurement...... variation of the received signal. Amplitude variation significantly affects the measurement accuracy when the surface axial displacement range is comparable with the ultrasonic wavelength. This paper presents a theoretical and experimental study of the effect of amplitude modulation on the performance......Ultrasonic Doppler-based systems for surface topography measurements are attractive alternatives to the transit-time-based methods. Sensors used in Doppler systems are less dependent on the speed of the sound in air, although contemporary Doppler measurement systems are sensitive to the amplitude...

  8. Radiative transfer effects on Doppler measurements as sources of surface effects in sunspot seismology

    CERN Document Server

    Rajaguru, S P; Wachter, R; Scherrer, P H

    2006-01-01

    We show that the use of Doppler shifts of Zeeman sensitive spectral lines to observe wavesn in sunspots is subject to measurement specific phase shifts arising from, (i) altered height range of spectral line formation and the propagating character of p mode waves in penumbrae, and (ii) Zeeman broadening and splitting. We also show that these phase shifts depend on wave frequencies, strengths and line of sight inclination of magnetic field, and the polarization state used for Doppler measurements. We discuss how these phase shifts could contribute to local helioseismic measurements of 'surface effects' in sunspot seismology.

  9. A proposed experimental method for interpreting Doppler effect measurements and determining their precision

    Science.gov (United States)

    Klann, P. G.

    1973-01-01

    The principal problem in the measurement of the Doppler reactivity effect is separating it from the thermal reactivity effects of the expansion of the heated sample. It is shown in this proposal that the thermal effects of sample expansion can be experimentally determined by making additional measurements with porous samples having the same mass and/or volume as the primary sample. By combining these results with independent measurements of the linear temperature coefficient and the computed temperature dependence of the Doppler coefficient the magnitude of the Doppler coefficient may be extracted from the data. These addiational measurements are also useful to experimentally determine the precision of the reactivity oscillator technique used to measure the reactivity effects of the heated sample.

  10. Measurement of Thermal Effects of Doppler Ultrasound: An In Vitro Study.

    Directory of Open Access Journals (Sweden)

    Samir Helmy

    Full Text Available Ultrasound is considered a safe imaging modality and is routinely applied during early pregnancy. However, reservations are expressed concerning the application of Doppler ultrasound in early pregnancy due to energy emission of the ultrasound probe and its conversion to heat. The objective of this study was to evaluate the thermal effects of emitted Doppler ultrasound of different ultrasound machines and probes by means of temperature increase of in-vitro test-media.We investigated the energy-output of 5 vaginal and abdominal probes of 3 ultrasound machines (GE Healthcare, Siemens, Aloka. Two in-vitro test objects were developed at the Center for Medical Physics and Biomedical Engineering, Medical University Vienna (water bath and hydrogel bath. Temperature increase during Doppler ultrasound emission was measured via thermal sensors, which were placed inside the test objects or on the probes' surface. Each probe was emitting for 5 minutes into the absorbing test object with 3 different TI/MI settings in Spectral Doppler mode.During water bath test, temperature increase varied between 0.1 and 1.0°C, depending on probe, setting and focus, and was found highest for spectral Doppler mode alone. Maximum temperature increase was found during the surface heating test, where values up to 2.4°C could be measured within 5 minutes of emission.Activation of Doppler ultrasound in the waterbath model causes a significant increase of temperature within one minute. Thermally induced effects on the embryo cannot be excluded when using Doppler ultrasound in early pregnancy.

  11. Measurement of velocities in noisy environments with a microwave Doppler-effect radar

    Energy Technology Data Exchange (ETDEWEB)

    Lozano-Rogado, J. [Departamento de Fisica Aplicada III, Facultad de Fisicas, Universidad Complutense de Madrid, Madrid (Spain)]. E-mail: jesloz@eucmos.sim.ucm.es; Miranda-Pantoja, J.M.; Sebastian, J.L. [Departamento de Fisica Aplicada III, Facultad de Fisicas, Universidad Complutense de Madrid, Madrid (Spain)

    2001-05-01

    An undergraduate experiment is proposed to facilitate the understanding of the basic principles related to radar systems and signal analysis. A Doppler-effect radar has been installed and used to measure the velocities of a target under different conditions. This system features the use of a low-power generator and a general purpose data acquisition card. The analysis of the measured IF (intermediate frequency) voltage has been made by using the fast Fourier transform in order to illustrate the relevance of the basic spectral techniques for the characterization of weak signals in noisy environments. (author)

  12. 多普勒效应测速新探%Revisiting the Doppler-effects Based Velocity Measurement

    Institute of Scientific and Technical Information of China (English)

    张梦琪; 杨名

    2015-01-01

    从大学物理教材出发,以多普勒测速为例,论述了在多普勒效应中测速仪与被测物体相对位置的不同对结果的影响.%Starting from the Doppler effects,this paper discussed basic principles of the Doppler-effect based velocity measurement and the special attention is paid to the effect of the relative position between the detector and the object on the measurement results.

  13. Photoacoustic Doppler flow measurement in optically scattering media

    Science.gov (United States)

    Fang, Hui; Maslov, Konstantin; Wang, Lihong V.

    2007-12-01

    We recently observed the photoacoustic Doppler effect from flowing small light-absorbing particles. Here, we apply the effect to measure blood-mimicking fluid flow in an optically scattering medium. The light scattering in the medium decreases the amplitude of the photoacoustic Doppler signal but does not affect either the magnitude or the directional discrimination of the photoacoustic Doppler shift. This technology may hold promise for a new Doppler method for measuring blood flow in microcirculation with high sensitivity.

  14. Assessment of the effect of vessel curvature on Doppler measurements in steady flow.

    Science.gov (United States)

    Balbis, S; Guiot, C; Roatta, S; Arina, R; Todros, T

    2004-05-01

    Blood vessel curvature is responsible for the appearance of nonaxial velocity components and for minor changes in the pattern of the axial flow. All the velocity components are expected to contribute to the Doppler signal produced by the ultrasound (US) backscattered by the insonated blood cells, the axial velocity, contributing to the actual volumetric blood flow, and the transverse velocity, causing the recirculating vortices. A detailed, separate analysis of the velocity components is, therefore, mandatory to quantify how vessel curvature can affect results and clinical diagnosis. Both experimental in vitro measures and numerical simulations were performed on a curved tube and the Doppler power spectra so obtained were compared. The satisfactorily agreement of the above spectra shows that the nonaxial velocity components are easily detectable with clinical equipment and that their amplitude, as expected, is not negligible and can bias Doppler measurements and resulting clinical diagnosis.

  15. An Undergraduate Experiment on Nuclear Lifetime Measurement Using the Doppler Effect

    Science.gov (United States)

    Campbell, J. L.; And Others

    1972-01-01

    While designed for a senior undergraduate laboratory, the experiment illustrates the principles involved in the various Doppler techniques currently used in nuclear lifetime studies and demonstrates the versatility of the Ge(Li) detector in applications other than direct energy or intensity measurement. (Author/TS)

  16. Student Microwave Experiments Involving the Doppler Effect.

    Science.gov (United States)

    Weber, F. Neff; And Others

    1980-01-01

    Described is the use of the Doppler Effect with microwaves in the measurement of the acceleration due to gravity of falling objects. The experiments described add to the repertoire of quantitative student microwave experiments. (Author/DS)

  17. Rotational Doppler effect in nonlinear optics

    Science.gov (United States)

    Li, Guixin; Zentgraf, Thomas; Zhang, Shuang

    2016-08-01

    The translational Doppler effect of electromagnetic and sound waves has been successfully applied in measurements of the speed and direction of vehicles, astronomical objects and blood flow in human bodies, and for the Global Positioning System. The Doppler effect plays a key role for some important quantum phenomena such as the broadened emission spectra of atoms and has benefited cooling and trapping of atoms with laser light. Despite numerous successful applications of the translational Doppler effect, it fails to measure the rotation frequency of a spinning object when the probing wave propagates along its rotation axis. This constraint was circumvented by deploying the angular momentum of electromagnetic waves--the so-called rotational Doppler effect. Here, we report on the demonstration of rotational Doppler shift in nonlinear optics. The Doppler frequency shift is determined for the second harmonic generation of a circularly polarized beam passing through a spinning nonlinear optical crystal with three-fold rotational symmetry. We find that the second harmonic generation signal with circular polarization opposite to that of the fundamental beam experiences a Doppler shift of three times the rotation frequency of the optical crystal. This demonstration is of fundamental significance in nonlinear optics, as it provides us with insight into the interaction of light with moving media in the nonlinear optical regime.

  18. Endoscopic Doppler ultrasound for measurement of azygos blood flow. Validation against thermodilution and assessment of pharmacological effects of terlipressin in portal hypertension

    DEFF Research Database (Denmark)

    2001-01-01

    BACKGROUND: Endoscopic ultrasound (EUS) is a new modality allowing real-time flow measurements by means of the Doppler technique. The aim of the study was to evaluate azygos blood flow measurements by endoscopic ultrasound. METHODS: Measurements of azygos blood flow by EUS and by the thermodilution....... RESULTS: The EUS Doppler and thermodilution measurements correlated significantly (R=0.81, P blood flow was found to be 14% higher by the EUS method than by thermodilution. The coefficient of variation of the EUS Doppler measurements of the azygos blood flow was 14.8%. After...... administration of terlipressin, the azygos blood flow, as measured by EUS Doppler, decreased significantly by 23% from 915 to 704 ml/min (P = 0.014) and the portal venous flow decreased by 28% from 1170 to 789 ml/min (P = 0.03). No effects of placebo were detected. CONCLUSIONS: These results show that EUS...

  19. Effects of various factors on Doppler ultrasonographic measurements of radial and coccygeal arterial blood pressure in privately owned, conscious cats.

    Science.gov (United States)

    Whittemore, Jacqueline C; Nystrom, Michael R; Mawby, Dianne I

    2017-04-01

    OBJECTIVE To assess the effects of age, body condition score (BCS), and muscle condition score (MCS) on radial and coccygeal systolic arterial blood pressure (SAP) in cats. DESIGN Prospective randomized trial. ANIMALS 66 privately owned cats enrolled between May and December 2010. PROCEDURES BCS and MCS of cats were assessed by 2 investigators; SAP was measured via Doppler ultrasonic flow detector, with cats positioned in right lateral or sternal recumbency for measurements at the radial or coccygeal artery, respectively, with order of site randomized. Associations among variables were assessed through correlation coefficients, partial correlation coefficients, and ANCOVA. RESULTS Interrater reliability for BCS and MCS assessment was high (correlation coefficients, 0.95 and 0.83, respectively). No significant effect was identified for order of SAP measurement sites. Coccygeal and radial SAP were positively correlated (ρ = 0.45). The median difference in coccygeal versus radial SAP was 19 mm Hg, but differences were not consistently positive or negative. Radial SAP was positively correlated with age (ρ = 0.48) and negatively correlated with MCS (ρ = -0.30). On the basis of the correlation analysis, the association between radial SAP and MCS reflected the confounding influence of age. Coccygeal SAP was not significantly correlated with age, BCS, or MCS. CONCLUSIONS AND CLINICAL RELEVANCE Use of the coccygeal artery is recommended to reduce the confounding effects of age and sarcopenia on Doppler ultrasonographic SAP measurements in cats. Additionally, monitoring for changes in MCS is recommended for cats undergoing serial SAP measurement.

  20. Use of GPS network data for HF Doppler measurements interpretation

    CERN Document Server

    Petrova, Inna R; Latypov, Ruslan R

    2014-01-01

    The method of measurement of Doppler frequency shift of ionospheric signal - HF Doppler technique - is one of well-known and widely used methods of ionosphere research. It allows to research various disturbances in the ionosphere. There are some sources of disturbances in the ionosphere. These are geomagnetic storms, solar flashes, metrological effects, atmospheric waves. This method allows to find out the influence of earthquakes, explosions and other processes on the ionosphere, which occur near to the Earth. HF Doppler technique has the high sensitivity to small frequency variations and the high time resolution, but interpretation of results is difficult. In this work we make an attempt to use GPS data for Doppler measurements interpretation. Modeling of Doppler frequency shift variations with use of TEC allows to separate ionosphere disturbances of medium scale.

  1. Inverse Doppler Effects in Flute

    CERN Document Server

    Zhao, Xiao P; Liu, Song; Shen, Fang L; Li, Lin L; Luo, Chun R

    2015-01-01

    Here we report the observation of the inverse Doppler effects in a flute. It is experimentally verified that, when there is a relative movement between the source and the observer, the inverse Doppler effect could be detected for all seven pitches of a musical scale produced by a flute. Higher tone is associated with a greater shift in frequency. The effect of the inverse frequency shift may provide new insights into why the flute, with its euphonious tone, has been popular for thousands of years in Asia and Europe.

  2. Investigations of Near-Zone Doppler Effects.

    Science.gov (United States)

    Prouty, Dale Austen

    Far away from an electromagnetic source the normal Doppler shifts in frequency occur--a red shift for receding and a blue shift for approaching. As indicated by previous work with an infinitesimal dipole, different frequency shifts occur when the source and observer move closer together, into the near-zone. These "near-zone Doppler effects" are investigated for general sources and subsequently two specific examples are presented. The general results show that near-zone shifts are similar to far-zone shifts, but the local phase velocity must be used, i.e. (DIAGRAM, TABLE OR GRAPHIC OMITTED...PLEASE SEE DAI). In the far zone the phase velocity is the speed of light; in the near zone it differs. Fundamentally, the distance between surfaces of constant phase in the near zone is changed. The surfaces of constant phase for the waves are no longer spherical, but more ellipsoidal or spheroidal, so that a moving observer sees a different frequency shift. Two specific examples are presented to indicate the actual magnitude of near-zone effects. The examples include a prolate spheroidal antenna and a circular aperture. Once the magnitude of the effects is determined, the measurability of near-zone Doppler effects is discussed. The investigation concentrates on Fresnel zone effects due to the measurement problem. Finally, it is shown that for an electrically large wire antenna (the spheroidal example) near-zone Doppler effects are measurable.

  3. The effect of isometric exercise of the hand on the synovial blood flow in patients with rheumatoid arthritis measured by color Doppler ultrasound

    DEFF Research Database (Denmark)

    Ellegaard, Karen; Torp-Pedersen, Søren; Lund, Hans

    2013-01-01

    In 90% of patients with rheumatoid arthritis (RA), the joints of the hand are affected. Studies of grip strength training have not indicated a negative effect on disease activity after training. Introduction of ultrasound Doppler (USD) to measure increased blood flow induced by inflammation has...

  4. The Doppler Effect--A New Approach

    Science.gov (United States)

    Allen, J.

    1973-01-01

    Discusses the Doppler effect as it applies to different situations, such as a stationary source of sound with the observer moving, a stationary observer, and the sound source and observer both moving. Police radar, satellite surveillance radar, radar astronomy, and the Doppler navigator, are discussed as applications of Doppler shift. (JR)

  5. No effect of 85 mT permanent magnets on laser-Doppler measured blood flow response to inspiratory gasps.

    Science.gov (United States)

    Mayrovitz, Harvey N; Groseclose, Edye E; King, David

    2005-05-01

    Although no effects of permanent magnets on resting skin blood flow (SBF) in humans have yet been demonstrated, the possibility that magnet related effects might modify dynamic SBF changes has not been previously studied. We hypothesized that magnets may alter local neurovascular mechanisms to cause changes in normal SBF vasoactive responses. To test this, we studied the effects of a magnet on SBF reductions induced by sympathetic reflexes associated with deep inspirations. SBF was continuously monitored by a dual channel laser-Doppler flowmeter with probes on the middle finger dorsum of both hands of 24 healthy subjects. In the first of two successive intervals, each of the fingers rested on sham ceramic magnets (control interval). Subsequently, one finger rested on an active magnet and the other finger on a sham (experimental interval). Skin temperatures were also measured. The magnet was a 37 mm diameter x 14 mm thick ceramic magnet with a surface field strength of 85 mT measured in the geometrical center of the magnet. Field strength at the finger dorsum, 13 mm above magnet, was 31.5 mT. During each interval, three deep breaths were used to elicit SBF reductions. Responses were calculated as the percent reduction in SBF from its prior 20 s average. Breaths in each interval were spaced 3 min apart to permit full recovery between responses. The experimental interval started after an active magnet was in place for 20 min. Results showed no significant difference in either vasoconstrictive responses or skin temperature due to the magnet. We conclude that magnets of the type, strength and duration used, have no significant effect on vasoconstrictive processes associated with this sympathetic reflex in this group of healthy subjects.

  6. Doppler Lidar for Wind Measurements on Venus

    Science.gov (United States)

    Singh, Upendra N.; Emmitt, George D.; Yu, Jirong; Kavaya, Michael J.

    2010-01-01

    NASA Langley Research Center has a long history of developing 2-micron laser transmitter for wind sensing. With support from NASA Laser Risk Reduction Program (LRRP) and Instrument Incubator Program (IIP), NASA Langley Research Center has developed a state-of-the-art compact lidar transceiver for a pulsed coherent Doppler lidar system for wind measurement. The transmitter portion of the transceiver employs the high-pulse-energy, Ho:Tm:LuLiF, partially conductively cooled laser technology developed at NASA Langley. The transceiver is capable of 250 mJ pulses at 10 Hz. It is very similar to the technology envisioned for coherent Doppler lidar wind measurements from Earth and Mars orbit. The transceiver is coupled to the large optics and data acquisition system in the NASA Langley VALIDAR mobile trailer. The large optics consists of a 15-cm off-axis beam expanding telescope, and a full-hemispheric scanner. Vertical and horizontal vector winds are measured, as well as relative backscatter. The data acquisition system employs frequency domain velocity estimation and pulse accumulation. It permits real-time display of the processed winds and archival of all data. This lidar system was recently deployed at Howard University facility in Beltsville, Mary-land, along with other wind lidar systems. Coherent Doppler wind lidar ground-based wind measurements and comparisons with other sensors will be presented. A simulation and data product for wind measurement at Venus will be presented.

  7. Azimuthal Doppler Effect in Optical Vortex Spectroscopy

    Science.gov (United States)

    Aramaki, Mitsutoshi; Yoshimura, Shinji; Toda, Yasunori; Morisaki, Tomohiro; Terasaka, Kenichiro; Tanaka, Masayoshi

    2015-11-01

    Optical vortices (OV) are a set of solutions of the paraxial Helmholtz equation in the cylindrical coordinates, and its wave front has a spiral shape. Since the Doppler shift is caused by the phase change by the movement in a wave field, the observer in the OV, which has the three-dimensional structured wave front, feels a three-dimensional Doppler effect. Since the multi-dimensional Doppler components are mixed into a single Doppler spectrum, development of a decomposition method is required. We performed a modified saturated absorption spectroscopy to separate the components. The OV and plane wave are used as a probe beam and pump beam, respectively. Although the plane-wave pump laser cancels the z-direction Doppler shift, the azimuthal Doppler shift remains in the saturated dip. The spatial variation of the dip width gives the information of the azimuthal Doppler shift. The some results of optical vortex spectroscopy will be presented.

  8. Superharmonic microbubble Doppler effect in ultrasound therapy

    Science.gov (United States)

    Pouliopoulos, Antonios N.; Choi, James J.

    2016-08-01

    The introduction of microbubbles in focused ultrasound therapies has enabled a diverse range of non-invasive technologies: sonoporation to deliver drugs into cells, sonothrombolysis to dissolve blood clots, and blood-brain barrier opening to deliver drugs into the brain. Current methods for passively monitoring the microbubble dynamics responsible for these therapeutic effects can identify the cavitation position by passive acoustic mapping and cavitation mode by spectral analysis. Here, we introduce a new feature that can be monitored: microbubble effective velocity. Previous studies have shown that echoes from short imaging pulses had a Doppler shift that was produced by the movement of microbubbles. Therapeutic pulses are longer (>1 000 cycles) and thus produce a larger alteration of microbubble distribution due to primary and secondary acoustic radiation force effects which cannot be monitored using pulse-echo techniques. In our experiments, we captured and analyzed the Doppler shift during long therapeutic pulses using a passive cavitation detector. A population of microbubbles (5  ×  104-5  ×  107 microbubbles ml-1) was embedded in a vessel (inner diameter: 4 mm) and sonicated using a 0.5 MHz focused ultrasound transducer (peak-rarefactional pressure: 75-366 kPa, pulse length: 50 000 cycles or 100 ms) within a water tank. Microbubble acoustic emissions were captured with a coaxially aligned 7.5 MHz passive cavitation detector and spectrally analyzed to measure the Doppler shift for multiple harmonics above the 10th harmonic (i.e. superharmonics). A Doppler shift was observed on the order of tens of kHz with respect to the primary superharmonic peak and is due to the axial movement of the microbubbles. The position, amplitude and width of the Doppler peaks depended on the acoustic pressure and the microbubble concentration. Higher pressures increased the effective velocity of the microbubbles up to 3 m s-1, prior to the onset of

  9. The effects of probe placement on measured flow velocity in transcranial Doppler ultrasound imaging in-vitro and in-vivo experiments

    Science.gov (United States)

    de Jong, Daan L. K.; Meel-van den Abeelen, Aisha S. S.; Lagro, Joep; Claassen, Jurgen A. H. R.; Slump, Cornelis H.

    2014-03-01

    The measurement of the blood flow in the middle cerebral artery (MCA) using transcranial Doppler ultrasound (US) imaging is clinically relevant for the study of cerebral autoregulation. Especially in the aging population, impairement of the autoregulation may coincide or relate to loss of perfusion and consequently loss of brain function. The cerebral autoregulation can be assessed by relating the blood pressure to the blood flow in the brain. Doppler US is a widely used, non-invasive method to measure the blood flow in the MCA. However, Doppler flow imaging is known to produce results that are dependent of the operator. The angle of the probe insonation with respect to the centerline of the blood vessel is a well known factor for output variability. In patients also the skull must be traversed and the MCA must be detected, influencing the US signal intensity. In this contribution we report two studies. We describe first an in-vitro setup to study the Doppler flow in a situation where the ground truth is known. Secondly, we report on a study with healthy volunteers where the effects of small probe displacements on the flow velocity signals are investigated. For the latter purpose, a special probe holder was designed to control the experiment.

  10. Correlation and Sequential Filtering with Doppler Measurements

    Institute of Scientific and Technical Information of China (English)

    WANGJianguo; HEPeikun; HANYueqiu; WUSiliang

    2004-01-01

    Two sequential filters are developed for Doppler radar measurements in the presence of correlation between range and range rate measurement errors. Two ideal linear measurement equations with the pseudo measurements are constructed via block-partitioned Cholesky factorization and the practical measurement equationswith the pseudo measurements are obtained through the direction cosine estimation and error compensation. The resulting sequential filters make the position measurement be possibly processed before the pseudo measurement and hence the more accurate direction cosine estimate can be obtained from the filtered position estimate rather than the predicted state estimate. The numerical simulations with different rangerange rate correlation coefficients show thatthe proposed two sequential filters are almost equivalent in performance but both superior to the conventional extended Kalman filter for different correlation coefficients.

  11. Inverse Doppler Effects in Broadband Acoustic Metamaterials.

    Science.gov (United States)

    Zhai, S L; Zhao, X P; Liu, S; Shen, F L; Li, L L; Luo, C R

    2016-08-31

    The Doppler effect refers to the change in frequency of a wave source as a consequence of the relative motion between the source and an observer. Veselago theoretically predicted that materials with negative refractions can induce inverse Doppler effects. With the development of metamaterials, inverse Doppler effects have been extensively investigated. However, the ideal material parameters prescribed by these metamaterial design approaches are complex and also challenging to obtain experimentally. Here, we demonstrated a method of designing and experimentally characterising arbitrary broadband acoustic metamaterials. These omni-directional, double-negative, acoustic metamaterials are constructed with 'flute-like' acoustic meta-cluster sets with seven double meta-molecules; these metamaterials also overcome the limitations of broadband negative bulk modulus and mass density to provide a region of negative refraction and inverse Doppler effects. It was also shown that inverse Doppler effects can be detected in a flute, which has been popular for thousands of years in Asia and Europe.

  12. Inverse Doppler Effects in Broadband Acoustic Metamaterials

    Science.gov (United States)

    Zhai, S. L.; Zhao, X. P.; Liu, S.; Shen, F. L.; Li, L. L.; Luo, C. R.

    2016-08-01

    The Doppler effect refers to the change in frequency of a wave source as a consequence of the relative motion between the source and an observer. Veselago theoretically predicted that materials with negative refractions can induce inverse Doppler effects. With the development of metamaterials, inverse Doppler effects have been extensively investigated. However, the ideal material parameters prescribed by these metamaterial design approaches are complex and also challenging to obtain experimentally. Here, we demonstrated a method of designing and experimentally characterising arbitrary broadband acoustic metamaterials. These omni-directional, double-negative, acoustic metamaterials are constructed with ‘flute-like’ acoustic meta-cluster sets with seven double meta-molecules; these metamaterials also overcome the limitations of broadband negative bulk modulus and mass density to provide a region of negative refraction and inverse Doppler effects. It was also shown that inverse Doppler effects can be detected in a flute, which has been popular for thousands of years in Asia and Europe.

  13. Observation of the Zero Doppler Effect

    Science.gov (United States)

    Ran, Jia; Zhang, Yewen; Chen, Xiaodong; Fang, Kai; Zhao, Junfei; Chen, Hong

    2016-04-01

    The normal Doppler effect has well-established applications in many areas of science and technology. Recently, a few experimental demonstrations of the inverse Doppler effect have begun to appear in negative-index metamaterials. Here we report an experimental observation of the zero Doppler effect, that is, no frequency shift irrespective of the relative motion between the wave signal source and the detector in a zero-index metamaterial. This unique phenomenon, accompanied by the normal and inverse Doppler effects, is generated by reflecting a wave from a moving discontinuity in a composite right/left-handed transmission line loaded with varactors when operating in the near zero-index passband, or the right/left-handed passband. This work has revealed a complete picture of the Doppler effect in metamaterials and may lead to potential applications in electromagnetic wave related metrology.

  14. Doppler sensitivity and its effect on transatlantic TWSTFT links

    Science.gov (United States)

    Zhang, Shengkang; Parker, Thomas; Zhang, Victor

    2017-02-01

    Some investigations have concluded that the diurnal pattern in the time comparison results of present two way satellite time and frequency transfer (TWSTFT) links may come mainly from Doppler dependent errors in the time of arrival (TOA) measurements made by the receivers of the TWSTFT modems. In this paper, several experiments were carried out to test if there is a Doppler dependent error in the ‘delay’ measurements of the receivers currently used. By simulating quantitative Doppler effects in the time transfer signal both on the carrier and the code, a type of Doppler sensitivity on the code was observed in the receivers, which has about  -0.49 ns offset in ‘delay’ measurement for a 1  ×  10-9 fractional Doppler shift. This sensitivity is basically the same for modems with different serial numbers from the same manufacture. We calculated this Doppler caused diurnal pattern in the time comparison results of the transatlantic TWSTFT link between NIST and PTB and found that it is very small and negligible, because the Doppler dependent error is almost identical in the NIST and PTB measurements and therefore it is nearly canceled in the TWSTFT difference. Commercial products are identified for technical completeness only, and no endorsement by NIST is implied.

  15. Inverse Doppler Effects in Broadband Acoustic Metamaterials

    National Research Council Canada - National Science Library

    Zhai, S L; Zhao, X P; Liu, S; Shen, F L; Li, L L; Luo, C R

    2016-01-01

    .... With the development of metamaterials, inverse Doppler effects have been extensively investigated. However, the ideal material parameters prescribed by these metamaterial design approaches are complex and also challenging to obtain experimentally...

  16. Design of new seismometer based on laser Doppler effect

    Institute of Scientific and Technical Information of China (English)

    Zhenhui Du(杜振辉); Fuxiang Huang(黄福祥); Chengzhi Jiang(蒋诚志); Zhifei Tao(陶知非); Hua Gao(高华); Lina Lü(吕丽娜)

    2004-01-01

    In order to improve the resolution of seismic acquisition, a new seismic acquisition system based on tangential laser Doppler effect with an optimized differential optical configuration is proposed. The relative movement of the inertia object and the immobile frame is measured by laser Doppler effect, which can avoid the electromagnetic and thermometric interference, and the adoption of frequency-modulated (FM)transmission can improve the ability of anti-jamming. The frequency bandwidth is properly determined by analyzing the frequency of the Doppler signal. The velocity, displacement, acceleration, and frequency to be measured can be real-time acquired by frequency/velocity (F/V) converting the FM Doppler signal.A 100-dB dynamic range and the linear frequency range of 1.0 to 1000 Hz are realized.

  17. Continuous cardiac output measurement - Aspects of Doppler frequency analysis

    Science.gov (United States)

    Mackay, R. S.; Hechtman, H. B.

    1975-01-01

    From the suprasternal notch blood flow velocity in the aorta can be measured non-invasively by a Doppler probe. Integration over systole after frequency analysis gives a measure of stroke volume if a separate diameter observation is incorporated. Frequency analysis by a zero crossing counter or by a set of parallel phaselock loops was less effective than a set of bandpass filters. Observations on dogs, baboons and humans before and after exercise or surgery suggest the indications to be useful. Application to judging heart failure by the effect of introducing a volume load is indicated. Changes in output also are measured in freely moving subjects.

  18. Teaching the Doppler effect in astrophysics

    Science.gov (United States)

    Hughes, Stephen W.; Cowley, Michael

    2017-03-01

    The Doppler effect is a shift in the frequency of waves emitted from an object moving relative to the observer. By observing and analysing the Doppler shift in electromagnetic waves from astronomical objects, astronomers gain greater insight into the structure and operation of our Universe. In this paper, a simple technique is described for teaching the basics of the Doppler effect to undergraduate astrophysics students using acoustic waves. An advantage of the technique is that it produces a visual representation of the acoustic Doppler shift. The equipment comprises a 40 kHz acoustic transmitter and a microphone. The sound is bounced off a computer fan and the signal collected by a DrDAQ ADC and processed by a spectrum analyser. Widening of the spectrum is observed as the fan power supply potential is increased from 4 to 12 V.

  19. A comparison between 133Xenon washout technique and Laser Doppler flowmetry in the measurement of local vasoconstrictor effects on the microcirculation in subcutaneous tissue and skin

    DEFF Research Database (Denmark)

    Kastrup, J; Bülow, J; Lassen, N A

    1987-01-01

    level. The measurements were performed in tissue with and without sympathetic innervation. In five subjects, who all had been cervically sympathectomized for manual hyperhidrosis, the Laser Doppler and 133Xenon blood flow measurements were performed simultaneously on the sympathetically denervated...... forearm, and on the calf with preserved sympathetic nerve supply. The Laser Doppler method registered a 23% reduction in skin blood flow during lowering of the extremities independently of the sympathetic nerve supply to the skin. The 133Xenon method recorded a 44% decrease in blood flow in innervated...... and unchanged blood flow in denervated subcutaneous tissue during lowering of the extremities. Our results indicate that the Laser Doppler method and 133Xenon method are not comparable, and that the Laser Doppler method is not useful in measuring local sympathetic mediated blood flow changes....

  20. Analysis of multiple scattering effects in optical Doppler tomography

    DEFF Research Database (Denmark)

    Yura, H.T.; Thrane, L.; Andersen, Peter E.

    2005-01-01

    Optical Doppler tomography (ODT) combines Doppler velocimetry and optical coherence tomography (OCT) to obtain high-resolution cross-sectional imaging of particle flow velocity in scattering media such as the human retina and skin. Here, we present the results of a theoretical analysis of ODT where...... multiple scattering effects are included. The purpose of this analysis is to determine how multiple scattering affects the estimation of the depth-resolved localized flow velocity. Depth-resolved velocity estimates are obtained directly from the corresponding mean or standard deviation of the observed...... Doppler frequency spectrum. Thus, in the present analysis, the dependence of the mean and standard deviation of the Doppler shift on the scattering properties of the flowing medium are obtained. Taking the multiple scattering effects into account, we are able to explain previous measurements of depth...

  1. The Doppler effect in NMR spectroscopy.

    Science.gov (United States)

    Guéron, Maurice

    2003-02-01

    An NMR sample may be subject to motions, such as those due to sample spinning or to liquid flow. Is the spectrum of such a sample affected by the Doppler effect? The question arises because, instrumental dimensions being much shorter than the wavelength, it is the near-field of the precessing magnetic moment which couples to the receiver coil, rather than the radiated far-field. We expand the near-field into plane propagating waves. For each such wave there is another one with the same amplitude, propagating in the opposite direction. The Doppler shifts are therefore equal and opposite. In the model case of a small fluid sample moving with constant velocity, this leads to a distribution of Doppler shifts which is symmetrical with respect to the unshifted frequency: there is no net spectral shift. We examine the possibility of observing the Doppler distribution in this case. We also consider the case of thermal motion of a gas. We draw attention to the resolved Doppler splitting of molecular rotational transitions in a supersonic burst as observed in a microwave resonator. We also mention briefly the Doppler effect in molecular beam spectroscopy.

  2. Endoscopic Doppler ultrasound for measurement of azygos blood flow. Validation against thermodilution and assessment of pharmacological effects of terlipressin in portal hypertension

    DEFF Research Database (Denmark)

    Hansen, Erik Feldager; Bendtsen, Flemming; Brinch, K

    2001-01-01

    technique were compared in 20 patients with portal hypertension. The ability of EUS flowmetry to detect changes in the azygos and portal venous flow after an intravenous dose of 2 mg of terlipressin was evaluated in 13 of the patients in a double-blind, randomized, placebo-controlled, cross-over design...... administration of terlipressin, the azygos blood flow, as measured by EUS Doppler, decreased significantly by 23% from 915 to 704 ml/min (P = 0.014) and the portal venous flow decreased by 28% from 1170 to 789 ml/min (P = 0.03). No effects of placebo were detected. CONCLUSIONS: These results show that EUS...... measurement of the azygos blood flow correlate strongly to the measurements by the thermodilution technique, and EUS is moreover well tolerated by the patients. The method is applicable for monitoring pharmacological effects on the superior porto-systemic collateral circulation and portal venous flow...

  3. Effect of Endolymphatic Hydrops on Sound Transmission in Live Guinea Pigs Measured with a Laser Doppler Vibrometer.

    Science.gov (United States)

    Ding, Chen-Ru; Xu, Xin-Da; Wang, Xin-Wei; Jia, Xian-Hao; Cheng, Xiang; Liu, Xiang; Yang, Lin; Tong, Bu-Sheng; Chi, Fang-Lu; Ren, Dong-Dong

    2016-01-01

    Objective. This study aimed at describing the mechanism of hearing loss in low frequency and the different dynamic behavior of the umbo, the stapes head, and the round window membrane (RWM) between normal guinea pigs and those with endolymphatic hydrops (EH), using a laser Doppler vibrometer (LDV). Methods. Cochlear sections were stained with hematoxylin and eosin (HE) to evaluate the hydropic ratio (HR). Auditory brainstem responses (ABR) and whole-mount immunostaining were measured. Displacement of the umbo, stapes head, and RWM in response to ear-canal sound was evaluated using a LDV. Results. Mean HR values in EH model of all the turns are larger than the control group. The ABR threshold of the EH group was significantly higher than that of the control. Strong positive correlation was found between HR at apical turn and ABR threshold elevation at 1000 Hz and at subapical turn and ABR threshold elevation at 2000 Hz. FITC-phalloidin immunostaining of the cochlear basilar membrane in the apical, subapical, and suprabasal turns showed missing and derangement stereocilia of third-row outer hair cells. The umbo, stapes head, and RWM displacement in ears with EH was generally lower than that of normal ears. The EH-induced differences in stapes head and RWM motion were significant at 0.5 kHz. Conclusion. The LDV results suggested that the higher inner ear impedance in EH affected the dynamic behavior of the two opening windows of the cochlea and then reduced the vibration of the ossicular chain by increasing the afterload, resulting in acoustic dysfunction. The vibration reduction mainly occurred at low frequencies, which has related with the morphology changes of the apical and subapical turns in EH model.

  4. Effect of Endolymphatic Hydrops on Sound Transmission in Live Guinea Pigs Measured with a Laser Doppler Vibrometer

    Directory of Open Access Journals (Sweden)

    Chen-Ru Ding

    2016-01-01

    Full Text Available Objective. This study aimed at describing the mechanism of hearing loss in low frequency and the different dynamic behavior of the umbo, the stapes head, and the round window membrane (RWM between normal guinea pigs and those with endolymphatic hydrops (EH, using a laser Doppler vibrometer (LDV. Methods. Cochlear sections were stained with hematoxylin and eosin (HE to evaluate the hydropic ratio (HR. Auditory brainstem responses (ABR and whole-mount immunostaining were measured. Displacement of the umbo, stapes head, and RWM in response to ear-canal sound was evaluated using a LDV. Results. Mean HR values in EH model of all the turns are larger than the control group. The ABR threshold of the EH group was significantly higher than that of the control. Strong positive correlation was found between HR at apical turn and ABR threshold elevation at 1000 Hz and at subapical turn and ABR threshold elevation at 2000 Hz. FITC-phalloidin immunostaining of the cochlear basilar membrane in the apical, subapical, and suprabasal turns showed missing and derangement stereocilia of third-row outer hair cells. The umbo, stapes head, and RWM displacement in ears with EH was generally lower than that of normal ears. The EH-induced differences in stapes head and RWM motion were significant at 0.5 kHz. Conclusion. The LDV results suggested that the higher inner ear impedance in EH affected the dynamic behavior of the two opening windows of the cochlea and then reduced the vibration of the ossicular chain by increasing the afterload, resulting in acoustic dysfunction. The vibration reduction mainly occurred at low frequencies, which has related with the morphology changes of the apical and subapical turns in EH model.

  5. Endoscopic Doppler ultrasound for measurement of azygos blood flow. Validation against thermodilution and assessment of pharmacological effects of terlipressin in portal hypertension

    DEFF Research Database (Denmark)

    Hansen, Erik Feldager; Bendtsen, Flemming; Brinch, K;

    2001-01-01

    BACKGROUND: Endoscopic ultrasound (EUS) is a new modality allowing real-time flow measurements by means of the Doppler technique. The aim of the study was to evaluate azygos blood flow measurements by endoscopic ultrasound. METHODS: Measurements of azygos blood flow by EUS and by the thermodilution...... technique were compared in 20 patients with portal hypertension. The ability of EUS flowmetry to detect changes in the azygos and portal venous flow after an intravenous dose of 2 mg of terlipressin was evaluated in 13 of the patients in a double-blind, randomized, placebo-controlled, cross-over design....... RESULTS: The EUS Doppler and thermodilution measurements correlated significantly (R=0.81, P blood flow was found to be 14% higher by the EUS method than by thermodilution. The coefficient of variation of the EUS Doppler measurements of the azygos blood flow was 14.8%. After...

  6. Comparison between /sup 133/Xenon washout technique and Laser Doppler flowmetry in the measurement of local vasoconstrictor effects on the microcirculation in subcutaneous tissue and skin

    Energy Technology Data Exchange (ETDEWEB)

    Kastrup, J.; Buelow, J.; Lassen, N.A.

    1987-10-01

    Changes in skin blood flow measured by Laser Doppler flowmetry and changes in subcutaneous blood flow measured by /sup 133/Xenon washout technique were compared during activation of the local sympathetic mediated veno-arteriolar vaso-constrictor reflex by lowering the area of investigation below heart level. The measurements were performed in tissue with and without sympathetic innervation. In five subjects, who all had been cervically sympathectomized for manual hyperhidrosis, the Laser Doppler and /sup 133/Xenon blood flow measurements were performed simultaneously on the sympathetically denervated forearm, and on the calf with preserved sympathetic nerve supply. The Laser Doppler method registered a 23% reduction in skin blood flow during lowering of the extremities independently of the sympathetic nerve supply to the skin. The /sup 133/Xenon method recorded a 44% decrease in blood flow in innervated and unchanged blood flow in denervated subcutaneous tissue during lowering of the extremities. Our results indicate that the Laser Doppler method and /sup 133/Xenon method are not comparable, and that the Laser Doppler method is not useful in measuring local sympathetic mediated blood flow changes.

  7. Laser Doppler flowmetry for bone blood flow measurement: correlation with microsphere estimates and evaluation of the effect of intracapsular pressure on femoral head blood flow

    Energy Technology Data Exchange (ETDEWEB)

    Swiontkowski, M.F.; Tepic, S.; Perren, S.M.; Moor, R.; Ganz, R.; Rahn, B.A.

    1986-01-01

    Laser Doppler flowmetry (LDF) was used to measure bone blood flow in the rabbit femoral condyles. To correlate the LDF output signal blood cell flux to in vivo blood flow, simultaneous measurements using LDF and /sup 85/Sr-labeled microspheres were made in an adult rabbit model. There was no correlation between the two methods for blood flow in the femoral condyles and the correlation between the two methods for blood flow in the femoral head does not achieve statistical significance. An LDF signal of 0.4 V was approximately equal to a microsphere measured flow rate of 0.4 ml blood/g bone/min. The strength of the correlation in the latter case may have been affected by (a) large arteriovenous shunts, (b) inadequate mixing of the microspheres with a left ventricular injection, and (c) insufficient numbers of microspheres present in the bone samples. When LDF was used to evaluate the effect of elevated intracapsular pressure on femoral head blood flow in skeletally mature rabbits, femoral head subchondral bone blood flow declined with increasing intracapsular pressure from a baseline value of 0.343 +/- 0.036 to a value of 0.127 +/- 0.27 at 120 cm of water pressure. The decline in femoral head blood flow was statistically significant at pressures of 40 cm of water or higher (p less than 0.001), and evaluation of sections of the proximal femora made from preterminal disulphine blue injections confirmed these findings. Intracapsular tamponade has an adverse effect on femoral head blood flow beginning well below central venous pressure and should be considered in the pathophysiology of posttraumatic and nontraumatic necrosis of the femoral head. Laser Doppler flowmetry was easy to use and appears to be a reproducible technique for evaluating femoral head blood flow, offering distinct advantages over the microsphere technique for measuring bone blood flow.

  8. Experimental Verification of Doppler Effect with the Refraction Method

    Institute of Scientific and Technical Information of China (English)

    Lie FENG; Jia-bi CHEN; Jing-bin HU; Song-lin ZHUANG

    2010-01-01

    The traditional methad of measuring Dopplr Effect is either reflection or dispersion.This article clarifies that it can also verify the Doppler Effect with the refraction method.We have designed the experimental system with the method of optical heterodyne,using the refraction light beam from a prism,and made the experiment.The experimental results are in accordance with the theoreticai calculation.It is very useful in some particular case,such as in Negative-Index Materials(NIM),to verify the Doppler Effect with this method.

  9. Observation of the inverse Doppler effect.

    Science.gov (United States)

    Seddon, N; Bearpark, T

    2003-11-28

    We report experimental observation of an inverse Doppler shift, in which the frequency of a wave is increased on reflection from a receding boundary. This counterintuitive effect has been produced by reflecting a wave from a moving discontinuity in an electrical transmission line. Doppler shifts produced by this system can be varied in a reproducible manner by electronic control of the transmission line and are typically five orders of magnitude greater than those produced by solid objects with kinematic velocities. Potential applications include the development of tunable and multifrequency radiation sources.

  10. Reversed Doppler effect in photonic crystals.

    Science.gov (United States)

    Reed, Evan J; Soljacić, Marin; Joannopoulos, John D

    2003-09-26

    Nonrelativistic reversed Doppler shifts have never been observed in nature and have only been speculated to occur in pathological systems with simultaneously negative effective permittivity and permeability. This Letter presents a different, new physical phenomenon that leads to a nonrelativistic reversed Doppler shift in light. It arises when light is reflected from a moving shock wave propagating through a photonic crystal. In addition to reflection of a single frequency, multiple discrete reflected frequencies or a 10 GHz periodic modulation can also be observed when a single carrier frequency of wavelength 1 microm is incident.

  11. Spectroscopic observation of the rotational Doppler effect.

    Science.gov (United States)

    Barreiro, S; Tabosa, J W R; Failache, H; Lezama, A

    2006-09-15

    We report on the first spectroscopic observation of the rotational Doppler shift associated with light beams carrying orbital angular momentum. The effect is evidenced as the broadening of a Hanle electromagnetically induced transparency coherence resonance on Rb vapor when the two incident Laguerre-Gaussian laser beams have opposite topological charges. The observations closely agree with theoretical predictions.

  12. Theoretical analysis and experimental verification on optical rotational Doppler effect

    CERN Document Server

    Zhou, Hailong; Dong, Jianji; Zhang, Pei; Zhang, Xinliang

    2016-01-01

    We present a theoretical model to sufficiently investigate the optical rotational Doppler effect based on modal expansion method. We find that the frequency shift content is only determined by the surface of spinning object and the reduced Doppler shift is linear to the difference of mode index between input and output orbital angular momentum (OAM) light, and linear to the rotating speed of spinning object as well. An experiment is carried out to verify the theoretical model. We explicitly suggest that the spatial spiral phase distribution of spinning object determines the frequency content. The theoretical model makes us better understand the physical processes of rotational Doppler effect, and thus has many related application fields, such as detection of rotating bodies, imaging of surface and measurement of OAM light.

  13. Theoretical analysis and experimental verification on optical rotational Doppler effect

    Science.gov (United States)

    Zhou, Hailong; Fu, Dongzhi; Dong, Jianji; Zhang, Pei; Zhang, Xinliang

    2016-05-01

    We present a theoretical model to sufficiently investigate the optical rotational Doppler effect based on modal expansion method. We find that the frequency shift content is only determined by the surface of spinning object and the reduced Doppler shift is linear to the difference of mode index between input and output orbital angular momentum (OAM) light, and linear to the rotating speed of spinning object as well. An experiment is carried out to verify the theoretical model. We explicitly suggest that the spatial spiral phase distribution of spinning object determines the frequency content. The theoretical model makes us better understand the physical processes of rotational Doppler effect, and thus has many related application fields, such as detection of rotating bodies, imaging of surface and measurement of OAM light.

  14. Millimeter-wave micro-Doppler measurements of small UAVs

    Science.gov (United States)

    Rahman, Samiur; Robertson, Duncan A.

    2017-05-01

    This paper discusses the micro-Doppler signatures of small UAVs obtained from a millimeter-wave radar system. At first, simulation results are shown to demonstrate the theoretical concept. It is illustrated that whilst the propeller rotation rate of the small UAVs is quite high, millimeter-wave radar systems are capable of capturing the full micro-Doppler spread. Measurements of small UAVs have been performed with both CW and FMCW radars operating at 94 GHz. The CW radar was used for obtaining micro-Doppler signatures of individual propellers. The field test data of a flying small UAV was collected with the FMCW radar and was processed to extract micro-Doppler signatures. The high fidelity results clearly reveal features such as blade flashes and propeller rotation modulation lines which can be used to classify targets. This work confirms that millimeter-wave radar is suitable for the detection and classification of small UAVs at usefully long ranges.

  15. Pulsed photoacoustic Doppler flow measurements in blood-mimicking phantoms

    Science.gov (United States)

    Brunker, J.; Beard, P.

    2011-03-01

    The feasibility of making spatially resolved measurements of blood flow using pulsed photoacoustic Doppler techniques has been explored. Doppler time shifts were quantified via cross-correlation of pairs of photoacoustic waveforms generated within a blood-simulating phantom using pairs of laser light pulses. The photoacoustic waves were detected using a focussed or planar PZT ultrasound transducer. For each flow measurement, a series of 100 waveform pairs was collected. Previous data processing methods involved rejection of poorly correlated waveform pairs; the modal velocity value and standard deviation were then extracted from the selected distribution of velocity measurements. However, the data selection criteria used in this approach is to some extent arbitrary. A new data analysis protocol, which involves averaging the 100 cross-correlation functions and thus uses all of the measured data, has been designed in order to prevent exclusion of outliers. This more rigorous approach has proved effective for quantifying the linear motion of micron-scale absorbers imprinted on an acetate sheet moving with velocities in the range 0.14 to 1.25 ms-1. Experimental parameters, such as the time separation between the laser pulses and the transducer frequency response, were evaluated in terms of their effect on the accuracy, resolution and range of measurable velocities. The technique was subsequently applied to fluid phantoms flowing at rates less than 5 mms-1 along an optically transparent tube. Preliminary results are described for three different suspensions of phenolic resin microspheres, and also for whole blood. Velocity information was obtained even under non-optimal conditions using a low frequency transducer and a low pulse repetition frequency. The distinguishing advantage of pulsed rather than continuous-wave excitation is that spatially resolved velocity measurements can be made. This offers the prospect of mapping flow within the microcirculation and thus

  16. A Reference Optical System of Laser Doppler Longitudinal Displacement Measurement

    Institute of Scientific and Technical Information of China (English)

    张存满; 赵洋; 李达成

    2001-01-01

    In this paper, a new reference optical system is put forward to achieve longitudinal displacement measurement. An optical grating is used for frequency mixing and getting high SNR signals in the measurement. Conditions and methods for getting Doppler beat signals are presented.The experiments indicate that this optical syetem can be used to measure the longitudinal displacement with high accuracy.

  17. Use of high sensitivity GNSS receiver Doppler measurements for indoor pedestrian dead reckoning.

    Science.gov (United States)

    He, Zhe; Renaudin, Valérie; Petovello, Mark G; Lachapelle, Gérard

    2013-03-28

    Dead-reckoning (DR) algorithms, which use self-contained inertial sensors combined with gait analysis, have proven to be effective for pedestrian navigation purposes. In such DR systems, the primary error is often due to accumulated heading drifts. By tightly integrating global navigation satellite system (GNSS) Doppler measurements with DR, such accumulated heading errors can usually be accurately compensated. Under weak signal conditions, high sensitivity GNSS (HSGNSS) receivers with block processing techniques are often used, however, the Doppler quality of such receivers is relatively poor due to multipath, fading and signal attenuation. This often limits the benefits of integrating HSGNSS Doppler with DR. This paper investigates the benefits of using Doppler measurements from a novel direct vector HSGNSS receiver with pedestrian dead-reckoning (PDR) for indoor navigation. An indoor signal and multipath model is introduced which explains how conventional HSGNSS Doppler measurements are affected by indoor multipath. Velocity and Doppler estimated by using direct vector receivers are introduced and discussed. Real experimental data is processed and analyzed to assess the veracity of proposed method. It is shown when integrating HSGNSS Doppler with PDR algorithm, the proposed direct vector method are more helpful than conventional block processing method for the indoor environments considered herein.

  18. Use of High Sensitivity GNSS Receiver Doppler Measurements for Indoor Pedestrian Dead Reckoning

    Directory of Open Access Journals (Sweden)

    Gérard Lachapelle

    2013-03-01

    Full Text Available Dead-reckoning (DR algorithms, which use self-contained inertial sensors combined with gait analysis, have proven to be effective for pedestrian navigation purposes. In such DR systems, the primary error is often due to accumulated heading drifts. By tightly integrating global navigation satellite system (GNSS Doppler measurements with DR, such accumulated heading errors can usually be accurately compensated. Under weak signal conditions, high sensitivity GNSS (HSGNSS receivers with block processing techniques are often used, however, the Doppler quality of such receivers is relatively poor due to multipath, fading and signal attenuation. This often limits the benefits of integrating HSGNSS Doppler with DR. This paper investigates the benefits of using Doppler measurements from a novel direct vector HSGNSS receiver with pedestrian dead-reckoning (PDR for indoor navigation. An indoor signal and multipath model is introduced which explains how conventional HSGNSS Doppler measurements are affected by indoor multipath. Velocity and Doppler estimated by using direct vector receivers are introduced and discussed. Real experimental data is processed and analyzed to assess the veracity of proposed method. It is shown when integrating HSGNSS Doppler with PDR algorithm, the proposed direct vector method are more helpful than conventional block processing method for the indoor environments considered herein.

  19. Exact classical Doppler effect derived from the photon emission process

    CERN Document Server

    Lin, Chyi-Lung; Hsieh, Shang-Lin; Tsai, Chun-Ming

    2016-01-01

    The concept of photon is not necessary only applied to the relativistic Doppler theory. It may also work well for classical theory. As conservation of momentum and energy are physical laws, if applying these laws gives the exact relativistic Doppler effect, it should also give the exact classical Doppler effect. So far the classical Doppler effect is only obtained by using some approximation, as derived by Fermi in 1932. We show that the exact classical Doppler effect can be derived from the photon emission process in the exact treatment and reveal that these results are the same as those derived from the wave theory of light.

  20. On acceleration dependence of Doppler effect in light

    Indian Academy of Sciences (India)

    Sanjay M Wagh

    2013-09-01

    Using only the geometric relationships of suitable locations, we analyse Doppler effect in light to show how the acceleration of the source also contributes to the Doppler shift. We further propose that an experiment be performed using cyclotron-type devices to determine the acceleration dependence of the Doppler shift.

  1. Arterial compliance measurement using a noninvasive laser Doppler measurement system

    Science.gov (United States)

    Hast, Jukka T.; Myllylae, Risto A.; Sorvoja, Hannu; Nissilae, Seppo M.

    2000-11-01

    The aim of this study was to study the elasticity of the arterial wall using a non-invasive laser Doppler measurement system. The elasticity of the arterial wall is described by its compliance factor, which can be determined when both blood pressure and the radial velocity of the arterial wall are known. To measure radical velocity we used a self- mixing interferometer. The compliance factors were measured from six healthy volunteers, whose ages were varied from 21 to 32. Although a single volunteer's compliance factor is presented as an example, this paper treated the volunteers as a group. First, the elastic modulus, which is inversely proportional to the compliance factor, was determined. Then, an exponential curve was fitted into the measured data and a characteristic equation for the elastic modulus of the arterial wall was determined. The elastic modulus was calculated at different pressures and the results were compared to the static incremental modulus of a dog's femoral artery. The results indicate that there is a correlation between human elastic and canine static incremental modulus for blood pressures varying from 60 to 110 mmHg.

  2. The effect of isometric exercise of the hand on the synovial blood flow in patients with rheumatoid arthritis measured by color Doppler ultrasound.

    Science.gov (United States)

    Ellegaard, Karen; Torp-Pedersen, Søren; Lund, Hans; Pedersen, Kirsten; Henriksen, Marius; Danneskiold-Samsøe, Bente; Bliddal, Henning

    2013-01-01

    In 90% of patients with rheumatoid arthritis (RA), the joints of the hand are affected. Studies of grip strength training have not indicated a negative effect on disease activity after training. Introduction of ultrasound Doppler (USD) to measure increased blood flow induced by inflammation has made it possible to investigate the direct effect on blood supply in the synovium after training. In this case-control study, 24 patients with RA with USD activity in the wrist joint participated. The USD activity was measured by the color fraction (CF) (CF = colored pixels/total number of pixels in ROI). Twenty-four patients were assigned to an 8-week grip strength training program. At baseline and after 8 weeks of training, an USD examination of the wrist joint was performed. In the training group, we measured grip strength and pain in the wrist joint. Six patients withdrew from the training because of pain or change in medication. Eighteen patients served as control group. There was a modest, not significant, decrease in the CF in response to training (1.86%; P = 0.08). Grip strength increased 8.8% after training (P = 0.055). Pain in motion deceased after training (P = 0.04). No difference in the CF was seen between the training and control groups, neither at baseline nor at follow-up (P = 0.82 and P = 0.48). Patients withdrawing from training had a significantly higher CF than the other patients (P > 0.001). The results in this study might indicate that the flow in the synovium assessed by USD is not affected by grip strength training.

  3. Miniature Laser Doppler Velocimeter for Measuring Wall Shear

    Science.gov (United States)

    Gharib, Morteza; Modarress, Darius; Forouhar, Siamak; Fourguette, Dominique; Taugwalder, Federic; Wilson, Daniel

    2005-01-01

    A miniature optoelectronic instrument has been invented as a nonintrusive means of measuring a velocity gradient proportional to a shear stress in a flow near a wall. The instrument, which can be mounted flush with the wall, is a variant of a basic laser Doppler velocimeter. The laser Doppler probe volume can be located close enough to the wall (as little as 100 micron from the surface) to lie within the viscosity-dominated sublayer of a turbulent boundary layer. The instrument includes a diode laser, the output of which is shaped by a diffractive optical element (DOE) into two beams that have elliptical cross sections with very high aspect ratios.

  4. High-resolution kinetic energy distributions via doppler shift measurements

    Science.gov (United States)

    Xu, Z.; Koplitz, B.; Buelow, S.; Baugh, D.; Wittig, C.

    1986-07-01

    In photolysis/probe experiments using pulsed sources, time delay produces both spatial and directional bias in the fragment distributions, thus enabling well-resolved kinetic energy distributions to be obtained from Doppler shift measurements. Data are presented for H-atoms detected using two-photon ionization, and high S/N and laser-limited kinetic energy resolution are demonstrated.

  5. Tethered acoustic doppler current profiler platforms for measuring streamflow

    Science.gov (United States)

    Rehmel, Michael S.; Stewart, James A.; Morlock, Scott E.

    2003-01-01

    The U.S. Geological Survey tested and refined tethered-platform designs for measuring streamflow. Platform specifications were developed, radio-modem telemetry of acoustic Doppler current profiler (ADCP) data and potential platform-hull sources were investigated, and hulls were tested and evaluated.

  6. The Martian rotation from Doppler measurements: Simulations of future radioscience experiments

    Science.gov (United States)

    Péters, Marie-Julie; Yseboodt, Marie; Dehant, Véronique; Le Maistre, Sebastien; Marty, Jean-Charles

    2016-10-01

    The radioscience experiment onboard the future InSight and ExoMars missions consists in two-way Doppler shift measurement from a X-band radio link between a lander on Mars and the ground stations on Earth. The Doppler effect on the radio signal is related to the revolution of the planets around the Sun and to the variations of the orientation and the rotation of Mars. The variations of the orientation of the rotation axis are the precession and nutations, related to the deep interior of Mars and the variations of the rotation rate are the length-of-day variation, related to the dynamic of the atmosphere.We perform numerical simulations of the Doppler measurements in order to quantify the precision that can be achieved on the determination of the Mars rotation and orientation parameters (MOP). For this purpose, we use the GINS (Géodésie par Intégrations Numériques Simultanées) software developed by the CNES and further adapted at the Royal Observatory of Belgium for planetary geodesy applications. This software enables to simulate the relative motion of the lander at the surface of Mars relative to the ground stations and to compute the MOP signature on the Doppler shift. The signature is the difference between the Doppler observable estimated taking into account a MOP and the Doppler estimated without this parameter.The objective is to build a strategy to be applied to future data processing in order to improve our estimation of the MOP. We study the effect of the elevation of the Earth in the sky of the lander, of the tracking duration and number of pass per week, of the tracking time, of the lander position and of Doppler geometry on the signatures. Indeed, due to the geometry, the Doppler data are highly sensitive to the position variations along the line of sight.

  7. Reexamination of the Doppler effect through Maxwell's equations.

    Science.gov (United States)

    Guo, Wei; Aktas, Yildirim

    2012-08-01

    In this work, the electric field emitted from a moving source, an electric point dipole, is analyzed for the purpose of illustrating the physics behind the Doppler effect. It is found that if the (translational) motion of the source is nonrelativistic, the Doppler effect is realized in two steps: the motion of the source first causes the dyadic Green function associated with the electric field to acquire an oscillation frequency in the far-field region of the source, and then the frequency leads to the Doppler effect. It is also demonstrated that the Doppler effect is observable only in the far-field region of the source.

  8. Analysis on rotational Doppler Effect based on modal expansion method

    CERN Document Server

    Zhou, Hailong; Zhang, Pei; Zhang, Xinliang

    2015-01-01

    We theoretically investigate the optical rotational Doppler Effect using modal expansion method. We find that the frequency shift content is only determined by the surface of spinning object and the reduced Doppler shift is linear to the change of mode index. The theoretical model makes us better understand the physical processes of rotational Doppler Effect. It can provide theoretical guidance for many related applications, such as detection of rotating bodies, detection of OAM and frequency shift.

  9. How to study the Doppler effect with Audacity software

    Science.gov (United States)

    Adriano Dias, Marco; Simeão Carvalho, Paulo; Rodrigues Ventura, Daniel

    2016-05-01

    The Doppler effect is one of the recurring themes in college and high school classes. In order to contextualize the topic and engage the students in their own learning process, we propose a simple and easily accessible activity, i.e. the analysis of the videos available on the internet by the students. The sound of the engine of the vehicle passing by the camera is recorded on the video; it is then analyzed with the free software Audacity by measuring the frequency of the sound during approach and recede of the vehicle from the observer. The speed of the vehicle is determined due to the application of Doppler effect equations for acoustic waves.

  10. Sound Power Estimation by Laser Doppler Vibration Measurement Techniques

    Directory of Open Access Journals (Sweden)

    G.M. Revel

    1998-01-01

    Full Text Available The aim of this paper is to propose simple and quick methods for the determination of the sound power emitted by a vibrating surface, by using non-contact vibration measurement techniques. In order to calculate the acoustic power by vibration data processing, two different approaches are presented. The first is based on the method proposed in the Standard ISO/TR 7849, while the second is based on the superposition theorem. A laser-Doppler scanning vibrometer has been employed for vibration measurements. Laser techniques open up new possibilities in this field because of their high spatial resolution and their non-intrusivity. The technique has been applied here to estimate the acoustic power emitted by a loudspeaker diaphragm. Results have been compared with those from a commercial Boundary Element Method (BEM software and experimentally validated by acoustic intensity measurements. Predicted and experimental results seem to be in agreement (differences lower than 1 dB thus showing that the proposed techniques can be employed as rapid solutions for many practical and industrial applications. Uncertainty sources are addressed and their effect is discussed.

  11. Aircraft Wake Vortex Measurement with Coherent Doppler Lidar

    Science.gov (United States)

    Wu, Songhua; Liu, Bingyi; Liu, Jintao

    2016-06-01

    Aircraft vortices are generated by the lift-producing surfaces of the aircraft. The variability of near-surface conditions can change the drop rate and cause the cell of the wake vortex to twist and contort unpredictably. The pulsed Coherent Doppler Lidar Detection and Ranging is an indispensable access to real aircraft vortices behavior which transmitting a laser beam and detecting the radiation backscattered by atmospheric aerosol particles. Experiments for Coherent Doppler Lidar measurement of aircraft wake vortices has been successfully carried out at the Beijing Capital International Airport (BCIA). In this paper, the authors discuss the Lidar system, the observation modes carried out in the measurements at BCIA and the characteristics of vortices.

  12. Aircraft Wake Vortex Measurement with Coherent Doppler Lidar

    Directory of Open Access Journals (Sweden)

    Wu Songhua

    2016-01-01

    Full Text Available Aircraft vortices are generated by the lift-producing surfaces of the aircraft. The variability of near-surface conditions can change the drop rate and cause the cell of the wake vortex to twist and contort unpredictably. The pulsed Coherent Doppler Lidar Detection and Ranging is an indispensable access to real aircraft vortices behavior which transmitting a laser beam and detecting the radiation backscattered by atmospheric aerosol particles. Experiments for Coherent Doppler Lidar measurement of aircraft wake vortices has been successfully carried out at the Beijing Capital International Airport (BCIA. In this paper, the authors discuss the Lidar system, the observation modes carried out in the measurements at BCIA and the characteristics of vortices.

  13. Double Doppler effect in two-dimensional photonic crystal with negative effective index

    Science.gov (United States)

    Jiang, Qiang; Chen, Jiabi; Liang, Binming; Zhuang, Songlin

    2016-11-01

    The inverse Doppler effect in photonic crystal with negative refractive index had been proofed experimentally in our previous research. In this paper, we studied the spatial harmonics of Bloch wave propagating in such PhCs by FFT method. The lagging and front phase evolutions reveal that both backward wave and forward wave exist in these harmonics. Subsequently, we studied the double Doppler effect phenomenon that both the normal and inverse Doppler exist in one photonic crystal simultaneously by using the improved dynamic FDTD method which we made it suitable for dealing with moving objects. The simulative Doppler frequency shifts were consistent with the theoretical values. Our study provides a potential technology in measurement area.

  14. X mode Doppler reflectometry k-spectral measurements in ASDEX Upgrade: experiments and simulations

    Science.gov (United States)

    Lechte, C.; Conway, G. D.; Görler, T.; Tröster-Schmid, C.; the ASDEX Upgrade Team

    2017-07-01

    The perpendicular density fluctuation spectrum in the tokamak ASDEX Upgrade was measured with Doppler reflectometry. In this paper, extensive plasma turbulence and microwave propagation simulations with the gene gyro-kinetic code and the ipf-fd3d full-wave code were undertaken to explain the observed spectral shape. It was shown that in this case the X-mode polarisation suffers both from a large nonlinear saturation effect at low-to-intermediate probed wavenumbers, and a super-linear enhancement effect at large wavenumbers. With these effects, we were able to explain the observed discrepancies between the gene perpendicular wavenumber spectra and the Doppler reflectometry derived wavenumber spectra. While the agreement is not perfect, the simulations give guidance on how to interpret X-mode Doppler reflectometry spectra.

  15. Using Doppler Shifts of GPS Signals To Measure Angular Speed

    Science.gov (United States)

    Campbell, Charles E., Jr.

    2006-01-01

    A method has been proposed for extracting information on the rate of rotation of an aircraft, spacecraft, or other body from differential Doppler shifts of Global Positioning System (GPS) signals received by antennas mounted on the body. In principle, the method should be capable of yielding low-noise estimates of rates of rotation. The method could eliminate the need for gyroscopes to measure rates of rotation. The method is based on the fact that for a given signal of frequency ft transmitted by a given GPS satellite, the differential Doppler shift is attributable to the difference between those components of the instantaneous translational velocities of the antennas that lie along the line of sight from the antennas to the GPS satellite.

  16. Acoustic doppler methods for remote measurements of ocean flows - a review

    Digital Repository Service at National Institute of Oceanography (India)

    Joseph, A.

    The evolution of acoustic doppler methods for remote measurements of ocean flows has been briefly reviewed in historical perspective. Both Eulerian and profiling methods have been discussed. Although the first acoustic Doppler current meter has been...

  17. Laser Doppler anemometer measurements using nonorthogonal velocity components: error estimates.

    Science.gov (United States)

    Orloff, K L; Snyder, P K

    1982-01-15

    Laser Doppler anemometers (LDAs) that are arranged to measure nonorthogonal velocity components (from which orthogonal components are computed through transformation equations) are more susceptible to calibration and sampling errors than are systems with uncoupled channels. In this paper uncertainty methods and estimation theory are used to evaluate, respectively, the systematic and statistical errors that are present when such devices are applied to the measurement of mean velocities in turbulent flows. Statistical errors are estimated for two-channel LDA data that are either correlated or uncorrelated. For uncorrelated data the directional uncertainty of the measured velocity vector is considered for applications where mean streamline patterns are desired.

  18. CALF BLOOD-FLOW AND POSTURE - DOPPLER ULTRASOUND MEASUREMENTS DURING AND AFTER EXERCISE

    NARCIS (Netherlands)

    VANLEEUWEN, BE; BARENDSEN, GJ; LUBBERS, J; DEPATER, L

    1992-01-01

    To investigate the joint effects of body posture and calf muscle pump, the calf blood flow of eight healthy volunteers was measured with pulsed Doppler equipment during and after 3 min of rhythmic exercise on a calf ergometer in the supine, sitting, and standing postures. Muscle contractions serious

  19. Thermal tests for laser Doppler perfusion measurements in Raynaud's syndrome

    Science.gov (United States)

    Kacprzak, Michal; Skora, A.; Obidzinska, J.; Zbiec, A.; Maniewski, Roman; Staszkiewicz, W.

    2004-07-01

    The laser Doppler method offers a non-invasive, real time technique for monitoring of blood perfusion in microcirculation. In practical measurements the perfusion index is given only in relative values. Thus, accurate and reproducible results can be only obtained when using a well controlled stimulation test. The aim of this study was evaluation of the thermal stimulation test, which is frequently used to investigate microcirculation in patients with Raynaud's syndrome. Three types of thermal tests, in which air or water with temperature in range 5°C - 40°C were used. Ten normal volunteers and fifteen patients with clinical symptoms of the primary Raynaud's syndrome were enrolled in this study. To estimate skin microcirculation changes during the thermal test, the multichannel laser Doppler system and laser Doppler scanner were used. The obtained results were analyzed from the point of view of the efficiency of these methods and the thermal provocative tests in differentiation of normal subjects and patient with Raynaud's syndrome.

  20. Radar Measurement of Human Polarimetric Micro-Doppler

    Directory of Open Access Journals (Sweden)

    David Tahmoush

    2013-01-01

    Full Text Available We use polarimetric micro-Doppler for the detection of arm motion, especially for the classification of whether someone has their arms swinging and is thus unloaded. The arm is often bent at the elbow, providing a surface somewhat similar to a dihedral. This is distinct from the more planar surfaces of the body which allows us to isolate the signals of the arm (and knee. The dihedral produces a double bounce that can be seen in polarimetric radar data by measuring the phase difference between HH and VV. This measurement can then be used to determine whether the subject is unloaded.

  1. Doppler effect in resonant photoemission from SF6: correlation between Doppler profile and Auger emission anisotropy.

    Science.gov (United States)

    Kitajima, M; Ueda, K; De Fanis, A; Furuta, T; Shindo, H; Tanaka, H; Okada, K; Feifel, R; Sorensen, S L; Gel'mukhanov, F; Baev, A; Agren, H

    2003-11-21

    Fragmentation of the SF6 molecule upon F 1s excitation has been studied by resonant photoemission. The F atomiclike Auger line exhibits the characteristic Doppler profile that depends on the direction of the photoelectron momentum relative to the polarization vector of the radiation as well as on the photon energy. The measured Doppler profiles are analyzed by the model simulation that takes account of the anisotropy of the Auger emission in the molecular frame. The Auger anisotropy extracted from the data decreases with an increase in the F-SF5 internuclear distance.

  2. Improvement of vertical velocity statistics measured by a Doppler lidar through comparison with sonic anemometer observations

    Science.gov (United States)

    Bonin, Timothy A.; Newman, Jennifer F.; Klein, Petra M.; Chilson, Phillip B.; Wharton, Sonia

    2016-12-01

    Since turbulence measurements from Doppler lidars are being increasingly used within wind energy and boundary-layer meteorology, it is important to assess and improve the accuracy of these observations. While turbulent quantities are measured by Doppler lidars in several different ways, the simplest and most frequently used statistic is vertical velocity variance (w'2) from zenith stares. However, the competing effects of signal noise and resolution volume limitations, which respectively increase and decrease w'2, reduce the accuracy of these measurements. Herein, an established method that utilises the autocovariance of the signal to remove noise is evaluated and its skill in correcting for volume-averaging effects in the calculation of w'2 is also assessed. Additionally, this autocovariance technique is further refined by defining the amount of lag time to use for the most accurate estimates of w'2. Through comparison of observations from two Doppler lidars and sonic anemometers on a 300 m tower, the autocovariance technique is shown to generally improve estimates of w'2. After the autocovariance technique is applied, values of w'2 from the Doppler lidars are generally in close agreement (R2 ≈ 0.95 - 0.98) with those calculated from sonic anemometer measurements.

  3. Measurement of wind profiles by motion-stabilised ship-borne Doppler lidar

    Science.gov (United States)

    Achtert, P.; Brooks, I. M.; Brooks, B. J.; Moat, B. I.; Prytherch, J.; Persson, P. O. G.; Tjernström, M.

    2015-11-01

    Three months of Doppler lidar wind measurements were obtained during the Arctic Cloud Summer Experiment on the icebreaker Oden during the summer of 2014. Such ship-borne Doppler measurements require active stabilisation to remove the effects of ship motion. We demonstrate that the combination of a commercial Doppler lidar with a custom-made motion-stabilisation platform enables the retrieval of wind profiles in the Arctic atmospheric boundary layer during both cruising and ice-breaking with statistical uncertainties comparable to land-based measurements. This held true particularly within the atmospheric boundary layer even though the overall aerosol load was very low. Motion stabilisation was successful for high wind speeds in open water and the resulting wave conditions. It allows for the retrieval of vertical winds with a random error below 0.2 m s-1. The comparison of lidar-measured wind and radio soundings gives a mean bias of 0.3 m s-1 (2°) and a mean standard deviation of 1.1 m s-1 (12°) for wind speed (wind direction). The agreement for wind direction degrades with height. The combination of a motion-stabilised platform with a low-maintenance autonomous Doppler lidar has the potential to enable continuous long-term high-resolution ship-based wind profile measurements over the oceans.

  4. Measurement of wind profiles by motion-stabilised ship-borne Doppler lidar

    Directory of Open Access Journals (Sweden)

    P. Achtert

    2015-11-01

    Full Text Available Three months of Doppler lidar wind measurements were obtained during the Arctic Cloud Summer Experiment on the icebreaker Oden during the summer of 2014. Such ship-borne Doppler measurements require active stabilisation to remove the effects of ship motion. We demonstrate that the combination of a commercial Doppler lidar with a custom-made motion-stabilisation platform enables the retrieval of wind profiles in the Arctic atmospheric boundary layer during both cruising and ice-breaking with statistical uncertainties comparable to land-based measurements. This held true particularly within the atmospheric boundary layer even though the overall aerosol load was very low. Motion stabilisation was successful for high wind speeds in open water and the resulting wave conditions. It allows for the retrieval of vertical winds with a random error below 0.2 m s−1. The comparison of lidar-measured wind and radio soundings gives a mean bias of 0.3 m s−1 (2° and a mean standard deviation of 1.1 m s−1 (12° for wind speed (wind direction. The agreement for wind direction degrades with height. The combination of a motion-stabilised platform with a low-maintenance autonomous Doppler lidar has the potential to enable continuous long-term high-resolution ship-based wind profile measurements over the oceans.

  5. From HARPS to CODEX: exploring the limits of Doppler measurements

    Science.gov (United States)

    Pepe, F. A.; Lovis, C.

    2008-08-01

    Only 3 6 years ago, the Doppler technique was believed to have reached its final limitations in measuring stellar velocities and finding extra-solar planets. The 3 4 m s-1 precision level achieved, at that time, by various teams, was certainly limited by instrumental performances, but also constrained, as believed by a part of the community, by intrinsic stellar limitations. The advent of HARPS drastically changed this view. The instrument demonstrated, through its recent discoveries, that stars more 'stable' than 1 m s-1 actually exist, and that their radial velocity (RV) can be measured at that level of precision. Short-term precision of 20 cm s-1 rms and long-term precision of the order of 30 60 cm s-1 rms have been actually achieved on real stars, showing that RVs still harbor a great potential, and not only in the domain of extra-solar planets. Indeed, HARPS inspired the CODEX@ELT experiment for the direct determination of the expansion of the Universe, measuring the Doppler shift of Ly-α forest lines as a function of time. This experiment calls for a Doppler precision as low as 1 cm s-1, which in turn inspires new possibilities in the domain of extra-solar planets. We will investigate the obstacles on the way to cm s-1 precision. The discussion presented here will be based on our experience with HARPS and what we consider to be the current limitations set by the instrument, telescope, atmosphere and star. Finally, we will also provide an outlook on possible improvements and expected performances, which will finally define new scientific opportunities.

  6. From HARPS to CODEX: exploring the limits of Doppler measurements

    Energy Technology Data Exchange (ETDEWEB)

    Pepe, F A; Lovis, C [Observatoire Astronomique, Universite de Geneve, CH-1290 Sauverny (Switzerland)], E-mail: Francesco.Pepe@obs.unige.ch

    2008-08-15

    Only 3-6 years ago, the Doppler technique was believed to have reached its final limitations in measuring stellar velocities and finding extra-solar planets. The 3-4 m s{sup -1} precision level achieved, at that time, by various teams, was certainly limited by instrumental performances, but also constrained, as believed by a part of the community, by intrinsic stellar limitations. The advent of HARPS drastically changed this view. The instrument demonstrated, through its recent discoveries, that stars more 'stable' than 1 m s{sup -1} actually exist, and that their radial velocity (RV) can be measured at that level of precision. Short-term precision of 20 cm s{sup -1} rms and long-term precision of the order of 30-60 cm s{sup -1} rms have been actually achieved on real stars, showing that RVs still harbor a great potential, and not only in the domain of extra-solar planets. Indeed, HARPS inspired the CODEX at ELT experiment for the direct determination of the expansion of the Universe, measuring the Doppler shift of Ly-{alpha} forest lines as a function of time. This experiment calls for a Doppler precision as low as 1 cm s{sup -1}, which in turn inspires new possibilities in the domain of extra-solar planets. We will investigate the obstacles on the way to cm s{sup -1} precision. The discussion presented here will be based on our experience with HARPS and what we consider to be the current limitations set by the instrument, telescope, atmosphere and star. Finally, we will also provide an outlook on possible improvements and expected performances, which will finally define new scientific opportunities.

  7. SIRHEN : a data reduction program for photonic Doppler velocimetry measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, Daniel H., III; Ao, Tommy

    2010-06-01

    SIRHEN (Sandia InfraRed HEtrodyne aNalysis) is a program for reducing data from photonic Doppler velocimetry (PDV) measurements. SIRHEN uses the short-time Fourier transform method to extract velocity information. The program can be run in MATLAB (2008b or later) or as a Windows executable. This report describes the new Sandia InfraRed HEtrodyne aNalysis program (SIRHEN; pronounced 'siren') that has been developed for efficient and robust analysis of PDV data. The program was designed for easy use within Sandia's dynamic compression community.

  8. Doppler effect induced spin relaxation boom

    Science.gov (United States)

    Zhao, Xinyu; Huang, Peihao; Hu, Xuedong

    2016-03-01

    We study an electron spin qubit confined in a moving quantum dot (QD), with our attention on both spin relaxation, and the product of spin relaxation, the emitted phonons. We find that Doppler effect leads to several interesting phenomena. In particular, spin relaxation rate peaks when the QD motion is in the transonic regime, which we term a spin relaxation boom in analogy to the classical sonic boom. This peak indicates that a moving spin qubit may have even lower relaxation rate than a static qubit, pointing at the possibility of coherence-preserving transport for a spin qubit. We also find that the emitted phonons become strongly directional and narrow in their frequency range as the qubit reaches the supersonic regime, similar to Cherenkov radiation. In other words, fast moving excited spin qubits can act as a source of non-classical phonons. Compared to classical Cherenkov radiation, we show that quantum dot confinement produces a small but important correction on the Cherenkov angle. Taking together, these results have important implications to both spin-based quantum information processing and coherent phonon dynamics in semiconductor nanostructures.

  9. Observation of the inverse Doppler effect in negative-index materials at optical frequencies

    Science.gov (United States)

    Chen, Jiabi; Wang, Yan; Jia, Baohua; Geng, Tao; Li, Xiangping; Feng, Lie; Qian, Wei; Liang, Bingming; Zhang, Xuanxiong; Gu, Min; Zhuang, Songlin

    2011-04-01

    The Doppler effect is a fundamental frequency shift phenomenon that occurs whenever a wave source and an observer are moving with respect to one another. It has well-established applications in astrophotonics, biological diagnostics, weather and aircraft radar systems, velocimetry and vibrometry. The counterintuitive inverse Doppler effect was theoretically predicted in 1968 by Veselago in negative-index materials. However, because of the tremendous challenges of frequency shift measurements inside such materials, most investigations of the inverse Doppler effect have been limited to theoretical predictions and numerical simulations. Indirect experimental measurements have been conducted only in nonlinear transmission lines at ~1-2 GHz (ref. 8) and in acoustic media at 1-3 kHz (ref. 9). Here, we report the first experimental observation of the inverse Doppler shift at an optical frequency (λ = 10.6 µm) by refracting a laser beam in a photonic-crystal prism that has the properties of a negative-index material.

  10. Mitigating Doppler shift effect in HF multitone data modem

    Science.gov (United States)

    Sonlu, Yasar

    1989-09-01

    Digital communications over High Frequency (HF) radio channels are getting important in recent years. Current HF requirements are for data transmission at rates 2.4 kbps or more to accommodate computer data links and digital secure voice. HF modems which were produced to meet these speeds are, serial modems and parallel modems. On the other hand, the HF sky-wave communication medium, the ionosphere, has some propagation problems such as multipath and Doppler shift. The effect of Doppler shift in a parallel modem which employs Differential Quadrature Phase Shift Keying (DQPSK) modulation is considered and a correction method to mitigate the Doppler Shift effect is introduced.

  11. Saturn's Doppler velocimetry wind measurements with VLT/UVES

    Science.gov (United States)

    Silva, Miguel; Mota Machado, Pedro; Luz, David; Sanchez-Lavega, Agustin; Hueso, Ricardo; Peralta, Javier

    2016-10-01

    We present Doppler wind velocity results of Saturn's zonal flow at ~0.4 mbar pressure level. Our aim is help to constrain the characterization of the equatorial jet at the referred altitude and the latitudinal variation of the zonal winds, to contribute to monitor the spatial and temporal variability in order to achieve a better understanding of the dynamics of Saturn's zonal winds, which Sánchez-Lavega et al. (2003, Nature, 423, 623) have found to have strongly changed in recent years, as the planet approached southern summer solstice.The UVES/VLT instrument has been used, which simultaneously achieves high spectral resolving power and high spatial resolution. The field has been derotated in order to have the aperture aligned perpendicularly to Saturn's rotation axis. In this configuration, spatial information in the East-West direction is preserved in a set of spectra in the direction perpendicular to dispersion.The technique of absolute accelerometry (AA, Connes, 1985, ApSS 110, 211) has been applied to the backscattered solar spectrum in order to determine the Doppler shift associated with the zonal circulation. Our measurements have been made in the wavelength range of 480-680 nm. Previously we successfully adapted this Doppler velocimetry technique for measuring winds at Venus cloud tops (Machado et al. 2012).The observations consisted of 4 blocks of 15 exposures of 90 sec, plus two shorter blocks of 9 exposures, totalling 7.3 hours of telescope time. In order to cover the whole disk the aperture has been offset by 1 arcsec in the North-South direction between consecutive exposures. Most of the northern hemisphere was covered by the rings. Saturn's diameter was 17.4 arcsec, and the slit aperture was 0.3x25 arcsec. The aperture offset between consecutive exposures was 1 arcsec. Two observations blocks of 9 exposures only covered the central part of the disk, and four others covered the whole disk. The sub-terrestrial point was at -26.1 degrees South. The

  12. The Doppler Effect: A Consideration of Quasar Redshifts.

    Science.gov (United States)

    Gordon, Kurtiss J.

    1980-01-01

    Provides information on the calculation of the redshift to blueshift ratio introduced by the transverse Doppler effect at relativistic speeds. Indicates that this shift should be mentioned in discussions of whether quasars are "local" rather than "cosmological" objects. (GS)

  13. The Doppler Effect: A Consideration of Quasar Redshifts.

    Science.gov (United States)

    Gordon, Kurtiss J.

    1980-01-01

    Provides information on the calculation of the redshift to blueshift ratio introduced by the transverse Doppler effect at relativistic speeds. Indicates that this shift should be mentioned in discussions of whether quasars are "local" rather than "cosmological" objects. (GS)

  14. Doppler lidar wind measurement with the edge technique

    Science.gov (United States)

    Korb, C. Laurence; Gentry, Bruce M.

    1992-01-01

    The edge technique is a new and powerful method for measuring small frequency shifts. Range resolved lidar measurements of winds can be made with high accuracy and high vertical resolution using the edge technique to measure the Doppler shift of an atmospheric backscattered signal from a pulsed laser. The edge technique can be used at near-infrared or visible wavelengths using well developed solid state lasers and detectors with various edge filters. In the edge technique, the laser frequency is located on the steep slope of the spectral response function of a high resolution optical filter. Due to the steep slope of the edge, very small frequency shifts cause large changes in measured signal. The frequency of the outgoing laser pulse is determined by measuring its location on the edge of the filter. This is accomplished by sending a small portion of the beam to the edge detection setup where the incoming light is split into two channels - an edge filter and an energy monitor channel. The energy monitor signal is used to normalize the edge filter signal for magnitude. The laser return backscattered from the atmosphere is collected by a telescope and directed through the edge detection setup to determine its frequency (location on the edge) in a similar manner for each range element. The Doppler shift, and thus the wind, is determined from a differential measurement of the frequency of the outgoing laser pulse and the frequency of the laser return backscattered from the atmosphere. We have conducted simulations of the performance of an edge lidar system using an injection seeded pulsed Nd:YAG laser at 1.06 microns. The central fringe of a Fabry-Perot etalon is used as a high resolution edge filter to measure the shift of the aerosol return.

  15. Laser Doppler flowmetry to measure changes in cerebral blood flow.

    Science.gov (United States)

    Sutherland, Brad A; Rabie, Tamer; Buchan, Alastair M

    2014-01-01

    Laser Doppler flowmetry (LDF) is a method by which relative cerebral blood flow (CBF) of the cortex can be measured. Although the method is easy to employ, LDF only measures relative CBF, while absolute CBF cannot be quantified. LDF is useful for investigating CBF changes in a number of different applications including neurovascular and stroke research. This chapter will prepare the reader for rodent experiments using LDF with two preparations. The closed skull preparation can be used to monitor CBF with an intact skull, but in adult rats, thinning of the skull is required to obtain an accurate cortical CBF signal. The open skull preparation requires a craniotomy to expose the surface of the brain and the LDF probe is held close to the surface to measure cerebral perfusion.

  16. Method for Canceling Ionospheric Doppler Effect

    Science.gov (United States)

    Vessot, R. F. C.

    1982-01-01

    Unified transponder system with hydrogen-maser oscillators at both stations can compensate for both motional and ionospheric components of Doppler shift. Appropriate choices of frequency shift in output of mixer m3. System exploits proportionality between dispersive component of frequency shift and reciprocal of frequency to achieve cancellation of dispersive component at output.

  17. Photoacoustic perfusion measurements: a comparison with power Doppler in phantoms

    Science.gov (United States)

    Heres, H. M.; Arabul, M. Ü.; Tchang, B. C.; van de Vosse, F. N.; Rutten, M. C.; Lopata, R. G.

    2015-03-01

    Ultrasound-based measurements using Doppler, contrast, and more recently photoacoustics (PA), have emerged as techniques for tissue perfusion measurements. In this study, the feasibility of in vitro perfusion measurements with a fully integrated, hand-held, photoacoustic probe was investigated and compared to Power Doppler (PD). Three cylindrical polyvinyl alcohol (PVA) phantoms were made (diameter = 15 mm) containing 100, 200 and 400 parallel polysulfone tubes (diameter = 0.2 mm), resulting in a perfused cross-sectional area of 1.8, 3.6 and 7.1% respectively. Each phantom was perfused with porcine blood (15 mL/min). Cross-sectional PA images (λ = 805nm, frame rate = 10Hz) and PD images (PRF = 750Hz) were acquired with a MyLab One and MyLab 70 scanner (Esaote, NL), respectively. Data were averaged over 70 frames. The average PA signal intensity was calculated in a region-of-interest of 4 mm by 6 mm. The percentage of colored PD pixels was measured in the entire phantom region. The average signal intensity of the PA images increased linearly with perfusion density, being 0.54 (+/- 0.01), 0.56 (+/- 0.01), 0.58 (+/- 0.01) with an average background signal of 0.53 in the three phantoms, respectively. For PD, the percentage of colored pixels in the phantom area (1.5% (+/- 0.2%), 4.4% (+/- 0.2%), 13.7% (+/- 0.8%)) also increased linearly. The preliminary results suggest that PA, like PD, is capable of detecting an increase of blood volume in tissue. In the future, in vivo measurements will be explored, although validation will be more complex.

  18. Doppler term in the galaxy two-point correlation function: wide-angle, velocity, Doppler lensing and cosmic acceleration effects

    OpenAIRE

    Raccanelli, Alvise; Bertacca, Daniele; Jeong, Donghui; Neyrinck, Mark C.; Szalay, Alexander S.

    2016-01-01

    We study the parity-odd part (that we shall call Doppler term) of the linear galaxy two-point correlation function that arises from wide-angle, velocity, Doppler lensing and cosmic acceleration effects. As it is important at low redshift and at large angular separations, the Doppler term is usually neglected in the current generation of galaxy surveys. For future wide-angle galaxy surveys such as Euclid, SPHEREx and SKA, however, we show that the Doppler term must be included. The effect of t...

  19. The Effect of Doppler Phenomenon on the Speed of Blood Flow

    Directory of Open Access Journals (Sweden)

    Ghaidaa Abdulrahman Khalid

    2012-01-01

    Full Text Available This research studying the phenomenon of Doppler (frequency Doppler as a method through which the direction and speed of the blood cells flows in blood vessels wear measured. This Doppler frequency is relied upon in medicine for measuring the speed of blood flow, because the blood flow is an important concept from the concepts of medicine. It represents the function and efficient of the heart and blood vessels in the body so any defect in this function will appear as a change in the speed of blood flow from the normal value assumed. As this speed changes alot in cases of disease and morbidity of the heart, so in order to identify the effect of changing the Doppler frequency on the speed of blood flow and the relationship of this frequency with the angles of transitions and receptions and the effect of changing the ultrasound transmitted frequencies on the measured velocities .The Doppler ultrasound system has been used which is more efficient and easier to be widely used as a practical application in Al Yarmouk Teaching Hospital on two subjects. The normal had a natural medical history in the blood vessels, and abnormal had carotid artery stenosis. This device will give the flow velocity of blood in the blood vessels which is useful to the examiner, the equation of Doppler as a mathematical model in the research is adopted the measured speed to clarify the amount of change in the frequency (shift in frequency. This speed was measured in five different blood vessels, large arteries (abdominal aorta and carotid artery in the neck and large veins (the inferior vena cava across the abdomen and the external Jugular vein in the neck and capillaries in the hand and fingers. Then using the measured velocities in these vessels the Doppler frequency was calculated from this mathematical model using MATLAB program, was found that as velocity of the blood increases, so does the Doppler frequency and vice versa. The greater the value of the Doppler angle

  20. Measurements of enlarged blood pump models using Laser Doppler Anemometer.

    Science.gov (United States)

    Chua, L P; Yu, S C; Leo, H L

    2000-01-01

    In an earlier study (Chua et al., 1998, 1999a), a 5:1 enlarged model of the Kyoto-NTN Magnetically Suspended Centrifugal Blood Pump (Akamatsu et al., 1995) with five different impeller blade profiles was designed and constructed. Their respective flow characteristics with respect to (1) the three different blade profile designs: forward, radial, and backward, (2) the number of blades used, and (3) the rotating speed were investigated. Among the five impeller designs, the results obtained suggested that impellers A and C designs should be adopted if higher head is required. Impellers A and C therefore were selected for the flow in between their blades to be measured using Laser Doppler Anemometer (LDA), so as to have a better understanding of the flow physics with respect to the design parameters.

  1. Wide angle Michelson Doppler imaging interferometer. [measuring atmospheric emissions

    Science.gov (United States)

    Shepherd, G. G.

    1980-01-01

    The optical system, stepping control, phase and modulation depth, array detector, and directions sensor are described for a specialized type of Michelson interferometer which works at sufficiently high resolution to measure the line widths and Doppler shifts of naturally occurring atmospheric emissions. With its imaging capability, the instrument can potentially supply this data independently for each element of the 100 x 100 detector array. The experiment seeks: (1) to obtain vertical profiles of atmospheric winds and temperatures as functions of latitude by observing near the limb; (2) to acquire exploratory wind and temperature data on smaller scale structures in airglow irregularities and in auroral forms; and (3) to collaborate with other Spacelab experiments, such as barium cloud releases, in providing wind and temperature data.

  2. Ultrasonic intrusion sensor using the Doppler effect; Choonpa Doppler hoshiki shinnyu sensor

    Energy Technology Data Exchange (ETDEWEB)

    Kani, H.; Iwasaki, N.; Goto, M. [Nippon Soken, Inc., Tokyo (Japan); Tsuzuki, T.; Nakamura, T. [Denso Corp., Aichi (Japan)

    1997-10-01

    For vehicle anti-theft alarm systems which cope with vehicle and car component theft, EU initiated vehicle security regulations from Jan 1997. Also, the insurance industry has instituted the insurance certification of vehicle anti-theft alarm systems. We have developed an ultrasonic intrusion sensor using the doppler effect for vehicle anti-theft alarm systems specifically for these EU regulations and insurance certification. 2 refs., 7 figs., 1 tab.

  3. Blood flow measurements during hemodialysis vascular access interventions - Catheter-based thermodilution or Doppler ultrasound?

    DEFF Research Database (Denmark)

    Heerwagen, Søren T; Hansen, Marc A; Schroeder, Torben V

    2012-01-01

    Purpose: To test the clinical performance of catheter-based thermodilution and Doppler ultrasound of the feeding brachial artery for blood flow measurements during hemodialysis vascular access interventions.Methods: Thirty patients with arteriovenous fistulas who underwent 46 interventions had...... access blood flow measured before and after every procedure. Two methods, catheter-based thermodilution and Doppler ultrasound, were compared to the reference method of ultrasound dilution. Catheter-based thermodilution and Doppler ultrasound were performed during the endovascular procedures while flow...

  4. Application of acoustic doppler velocimeters for streamflow measurements

    Science.gov (United States)

    Rehmel, M.

    2007-01-01

    The U.S. Geological Survey (USGS) principally has used Price AA and Price pygmy mechanical current meters for measurement of discharge. New technologies have resulted in the introduction of alternatives to the Price meters. One alternative, the FlowTracker acoustic Doppler velocimeter, was designed by SonTek/YSI to make streamflow measurements in wadeable conditions. The device measures a point velocity and can be used with standard midsection method algorithms to compute streamflow. The USGS collected 55 quality-assurance measurements with the FlowTracker at 43 different USGS streamflow-gaging stations across the United States, with mean depths from 0.05to0.67m, mean velocities from 13 to 60 cm/s, and discharges from 0.02 to 12.4m3/s. These measurements were compared with Price mechanical current meter measurements. Analysis of the comparisons shows that the FlowTracker discharges were not statistically different from the Price meter discharges at a 95% confidence level. ?? 2007 ASCE.

  5. Measurement of neonatal heart rate using handheld Doppler ultrasound.

    Science.gov (United States)

    Dyson, Amanda; Jeffrey, Michele; Kluckow, Martin

    2017-03-01

    This pilot study aimed to determine whether handheld Doppler ultrasound is feasible and reliable for measuring neonatal heart rate (HR) when compared with ECG. Stable newborns were recruited from the neonatal intensive care unit and postnatal ward between July 2014 and January 2015 at Royal North Shore Hospital, Sydney, Australia. Each newborn had their HR recorded every 15 s over 145 s using four different modalities: ECG, counted audible Doppler (AD) over 10 s, pulse oximetry (PO) and the Doppler display (DD). The correlation and variation between each modality and ECG. 51 newborns with a median gestational age of 38 weeks (27-41) and a mean weight of 2.78 kg (0.82 to 4.76) with a median postnatal age of 3 days (0-87) were studied. There was a mean difference of 0.69 bpm (95% CI -2.9 to +1.5) between AD-HR and ECG-HR with good correlation between modalities (r=0.94, p<0.01). The median time to achieve AD-HR was 3 s (1-45). The mean difference between DD-HR and ECG-HR was 5.37 bpm (95% CI -12.8 to +2.1) with moderate correlation (r=0.37, p=0.04). The mean difference between PO-HR and ECG-HR was 0.49 bpm (95% CI -1.5 to +0.51) with good correlation (r=0.99, p<0.01). The variability between AD-HR and ECG-HR decreased with decreasing weight. AD-HR correlates well with ECG-HR. Further research in the delivery room is recommended before using AD-HR in this area. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  6. Measurement of depth of burns by laser Doppler perfusion imaging

    NARCIS (Netherlands)

    Droog, E.J.; Droog, E.J.; Steenbergen, Wiendelt; Sjöberg, F.

    2001-01-01

    Laser Doppler perfusion imaging (LDPI), is a further development in laser Doppler flowmetry (LDF). Its advantage is that it enables assessment of microvascular blood flow in a predefined skin area rather than, as for LDF, in one place. In many ways this method seems to be more promising than LDF in

  7. Measurement of depth of burns by laser Doppler perfusion imaging

    NARCIS (Netherlands)

    Droog, E.J.; Steenbergen, W.; Sjöberg, F.

    2001-01-01

    Laser Doppler perfusion imaging (LDPI), is a further development in laser Doppler flowmetry (LDF). Its advantage is that it enables assessment of microvascular blood flow in a predefined skin area rather than, as for LDF, in one place. In many ways this method seems to be more promising than LDF in

  8. Measurement of wind profiles by motion-stabilised ship-borne Doppler lidar

    Directory of Open Access Journals (Sweden)

    P. Achtert

    2015-09-01

    Full Text Available Three months of Doppler lidar wind measurements were obtained during the Arctic Cloud Summer Experiment on the icebreaker Oden during the summer of 2014. Such ship-borne measurements require active stabilisation to remove the effects of ship motion. We demonstrate that the combination of a commercial Doppler lidar with a custom-made motion-stabilisation platform enables the retrieval of wind profiles in the Arctic boundary layer during both cruising and ice-breaking with statistical uncertainties comparable to land-based measurements. This holds particularly within the planetary boundary layer even though the overall aerosol load was very low. Motion stabilisation was successful for high wind speeds in open water and the resulting wave conditions. It allows for the retrieval of winds with a random error below 0.2 m s−1, comparable to the measurement error of standard radiosondes. The combination of a motion-stabilised platform with a low-maintenance autonomous Doppler lidar has the potential to enable continuous long-term high-resolution ship-based wind profile measurements over the oceans.

  9. It's all in the past: Deconstructing the temporal Doppler effect.

    Science.gov (United States)

    Aksentijevic, Aleksandar; Treider, John Melvin Gudnyson

    2016-10-01

    A recent study reported an asymmetry between subjective estimates of future and past distances with passive estimation and virtual movement. The temporal Doppler effect refers to the contraction of future distance judgments relative to past ones. We aimed to replicate the effect using real and imagined motion in both directions as well as different temporal perspectives. To avoid the problem of subjective anchoring, we compared real- and imagined-, ego- and time-moving conditions to a control group. Generally, Doppler-like distortion was only observed in conditions in which the distance between the participant and a frontal target increased. No effects of temporal perspective were observed. The "past-directed temporal Doppler effect" presents a challenge for the current theories of temporal cognition by demonstrating absence of psychological movement into the future. The effect could open new avenues in memory research and serve as a starting point in a systematic examination of how the humans construct future.

  10. A revised uncertainty budget for measuring the Boltzmann constant using the Doppler Broadening Technique on ammonia

    CERN Document Server

    Lemarchand, Cyril; Sow, Papa Lat Tabara; Triki, Meriam; Tokunaga, Sean K; Briaudeau, Stephan; Chardonnet, Christian; Darquié, Benoît; Daussy, Christophe

    2013-01-01

    We report on our on-going effort to measure the Boltzmann constant, kB, using the Doppler Broadening Technique. The main systematic effects affecting the measurement are discussed. A revised error budget is presented in which the global uncertainty on systematic effects is reduced to 2.3 ppm. This corresponds to a reduction of more than one order of magnitude compared to our previous Boltzmann constant measurement. Means to reach a determination of kB at the part per million accuracy level are outlined.

  11. Spectral analysis of laser-Doppler perfusion signal measured during thermal test.

    Science.gov (United States)

    Maniewski, R; Leger, P; Lewandowski, P; Liebert, A; Bendayan, P; Boccalon, H; Bajorski, L; Möller, K O

    1999-01-01

    The method of spectral analysis of laser-Doppler perfusion signal measured during thermal test is proposed. During three 20 min phases with 40, 5, and 40 degrees C of thermal test laser-Doppler perfusion signal was recorded. For each signal phase frequency spectra were calculated using the FFT method. Quantitative parameter Spectral Factor for results evaluation was proposed. In total 94 patients were measured: 69 with Raynaud's phenomenon and 25 normal subjects. Additionally in 18 Raynaud's patients the influence of Nifedipine was studied. Results suggest that proposed parameter is able to differentiate between Raynaud's patients and normal subjects and that is useful for evaluation of Nifedipine effectiveness. However, further studies are needed to improve the method to differentiate between primary and secondary Raynaud's patients.

  12. Development of fiber optic laser Doppler velocimeter for measurement of local blood velocity

    Science.gov (United States)

    Ohba, Kenkich; Fujiwara, Noboru

    1993-08-01

    In order to measure the local velocity field in opaque fluid flows like blood flow, a new laser Doppler velocimeter having a pickup consisting of a small distributed index lens attached to the tips of two fibers which are joined side by side in parallel has been newly developed. The distributed index lens is the shape of a truncated cone. The flow field around this sensor has been measured very precisely by means of an ordinary LDV. The effect of turbidity of fluid on the quality of the laser Doppler signal from this sensor has been examined by experiments. As a result, it has been shown that this LDV sensor has a high signal-to-noise ratio, and that the disturbance against flow by the sensor is very small, and it is very promising as a velocity sensor for opaque or semi-opaque fluid flow like blood flow.

  13. Genetic oscillations. A Doppler effect in embryonic pattern formation.

    Science.gov (United States)

    Soroldoni, Daniele; Jörg, David J; Morelli, Luis G; Richmond, David L; Schindelin, Johannes; Jülicher, Frank; Oates, Andrew C

    2014-07-11

    During embryonic development, temporal and spatial cues are coordinated to generate a segmented body axis. In sequentially segmenting animals, the rhythm of segmentation is reported to be controlled by the time scale of genetic oscillations that periodically trigger new segment formation. However, we present real-time measurements of genetic oscillations in zebrafish embryos showing that their time scale is not sufficient to explain the temporal period of segmentation. A second time scale, the rate of tissue shortening, contributes to the period of segmentation through a Doppler effect. This contribution is modulated by a gradual change in the oscillation profile across the tissue. We conclude that the rhythm of segmentation is an emergent property controlled by the time scale of genetic oscillations, the change of oscillation profile, and tissue shortening.

  14. Ultrasonic Doppler measurement of renal artery blood flow

    Science.gov (United States)

    Freund, W. R.; Beaver, W. L.; Meindl, J. D.

    1976-01-01

    Studies were made of (1) blood flow redistribution during lower body negative pressure (LBNP), (2) the profile of blood flow across the mitral annulus of the heart (both perpendicular and parallel to the commissures), (3) testing and evaluation of a number of pulsed Doppler systems, (4) acute calibration of perivascular Doppler transducers, (5) redesign of the mitral flow transducers to improve reliability and ease of construction, and (6) a frequency offset generator designed for use in distinguishing forward and reverse components of blood flow by producing frequencies above and below the offset frequency. Finally methodology was developed and initial results were obtained from a computer analysis of time-varying Doppler spectra.

  15. Minimally destructive Doppler measurement of a quantized, superfluid flow

    Science.gov (United States)

    Anderson, Neil; Kumar, Avinash; Eckel, Stephen; Stringari, Sandro; Campbell, Gretchen

    2016-05-01

    Ring shaped Bose-Einstein condensates are of interest because they support the existence of quantized, persistent currents. These currents arise because in a ring trap, the wavefunction of the condensate must be single valued, and thus the azimuthal velocity is quantized. Previously, these persistent current states have only been measured in a destructive fashion via either interference with a phase reference or using the size of a central vortex-like structure that appears in time of flight. Here, we demonstrate a minimally destructive, in-situ measurement of the winding number of a ring shaped BEC. We excite a standing wave of phonon modes in the ring BEC using a perturbation. If the condensate is in a nonzero circulation state, then the frequency of these phonon modes are Doppler shifted, causing the standing wave to precess about the ring. From the direction and velocity of this precession, we can infer the winding number of the flow. For certain parameters, this technique can detect individual winding numbers with approximately 90% fidelity.

  16. Doppler-like effect and doubtful expansion of universe

    CERN Document Server

    Szaraniec, E

    2003-01-01

    The distance contraction, as observed in electrical soundings over horizontally stratified earth (static system), is identified as a counterpart of Doppler shift in dynamical systems. Identification of Doppler-like effect in a stock-still systems makes it possible to give an al-ternative answer to the question about an effective cause of the Doppler shift, which sounds: the inhomogeneities. This answer opens different static as well as kinematic possibilities, which challenge established theories of expanding universe and energizing big bang.The energy propagating in stratified universe of layers exhibits a shift which could be at-tributed not only to the expansion (Hubble's theory) but alternatively to fluctuations in material properties (inhomogeneities).

  17. Relative blood flow changes measured using calibrated frequency-weighted Doppler power at different hematocrit levels.

    Science.gov (United States)

    Wallace, Sean; Logallo, Nicola; Faiz, Kashif W; Lund, Christian; Brucher, Rainer; Russell, David

    2014-04-01

    In theory, the power of a trans-cranial Doppler signal may be used to measure changes in blood flow and vessel diameter in addition to velocity. In this study, a flow index (FI) of relative changes in blood flow was derived from frequency-weighted Doppler power signals. The FI, plotted against velocity, was calibrated to the zero intercept with absent flow to reduce the effects of non-uniform vessel insonation. An area index was also calculated. FIs were compared with actual flow in four silicone tubes of different diameter at increasing flow rates and increasing hematocrit (Hct) in a closed-loop phantom model. FI values were strongly correlated with actual flow, at constant Hct, but varied substantially with changes in Hct. Percentage changes in area indexes, relative to the 4-mm tube, were strongly correlated with tube cross-sectional area. The implications of these results for in vivo use are discussed.

  18. Determining the Speed of Sound Using the Doppler Effect.

    Science.gov (United States)

    Gagne, Richard.

    1996-01-01

    Presents a simple but effective experiment that uses ultrasonic transducers and some basic electronics to study the speed of sound using the Doppler effect. Eliminates the noise problems associated with most sound experiments. Discusses the theory, and describes the apparatus and procedure. (JRH)

  19. Validation of Doppler ultrasound and magnetic resonance imaging velocity measurements by means of a test object

    NARCIS (Netherlands)

    Oostayen, J.A. van; Bezemer, R.A.; Wasser, M.N.J.M.; Teirlinck, C.J.P.M.

    1996-01-01

    Objective: To validate Doppler ultrasound and MRI mean velocity measurements in a test object in which mean velocities are known and can be chosen within a range of 10-100 cm/s in tubes of 4 and 8 mm. This validation was carried out to check the performance of a duplex Doppler ultrasound system that

  20. Seeing-Induced Errors in Solar Doppler Velocity Measurements

    CERN Document Server

    Padinhatteeri, Sreejith; Sankarasubramanian, K; 10.1007/s11207-010-9597-1

    2010-01-01

    Imaging systems based on a narrow-band tunable filter are used to obtain Doppler velocity maps of solar features. These velocity maps are created by taking the difference between the blue- and red-wing intensity images of a chosen spectral line. This method has the inherent assumption that these two images are obtained under identical conditions. With the dynamical nature of the solar features as well as the Earth's atmosphere, systematic errors can be introduced in such measurements. In this paper, a quantitative estimate of the errors introduced due to variable seeing conditions for ground-based observations is simulated and compared with real observational data for identifying their reliability. It is shown, under such conditions, that there is a strong cross-talk from the total intensity to the velocity estimates. These spurious velocities are larger in magnitude for the umbral regions compared to the penumbra or quiet-sun regions surrounding the sunspots. The variable seeing can induce spurious velocitie...

  1. New procedures for analyzing Doppler-shift attenuation lifetime measurements

    Energy Technology Data Exchange (ETDEWEB)

    Petkov, P., E-mail: petkov@inrne.bas.bg [Bulgarian Academy of Sciences, Institute for Nuclear Research and Nuclear Energy, 1784 Sofia (Bulgaria); Dewald, A. [Institut für Kernphysik, Universität zu Köln, D-50937 Köln (Germany); Tonev, D.; Goutev, N.; Asova, G.; Dimitrov, B.; Gavrilov, G.; Mineva, M.N.; Yavahchova, M.S. [Bulgarian Academy of Sciences, Institute for Nuclear Research and Nuclear Energy, 1784 Sofia (Bulgaria)

    2015-05-21

    A generalization of an earlier proposed version of the Differential decay curve method is presented for the analysis of Doppler-shift attenuation lifetime measurements. The lifetime is derived directly from the line shapes of the depopulating and feeding transitions without any assumptions about or fitting of the time dependence of the population of the corresponding levels except for unobserved feeding when relevant. Fitting of the line shapes is also not necessary. The only approximation involved is related to the continuous treatment of the nuclear scattering events in the Monte Carlo simulation needed. Tests with simulated and real data reveal good reliability of this method. We propose also a new precise procedure where the lifetime is derived by fitting the time dependence of the population of the level of interest using the line shape of the depopulating transition and the difference of the spectra of the depopulating and feeding transitions. Practical application to simulated and real data proves the applicability of the new procedure.

  2. 用李萨如图形变化的快慢测多普勒效应中的频率差(测速)%Measuring frequency shift (speed) in Doppler effect through the variation of Lissajous figures

    Institute of Scientific and Technical Information of China (English)

    周珺; 王婷; 郭鹏

    2013-01-01

    The measurement of frequency shift was difficult in speedometer system based on Doppler effect .The application of Lissajous figures in the system was introduced .The experiment was more practical because a remote controlled toy car was used to simulate real vehicle .%针对当前利用多普勒效应测速实验中的测量频率差难的问题,通过实验发现利用李萨如图形变化的快慢测多普勒效应中的频率差,效果很好。实验中设计了使用遥控赛车模拟现实中的车辆,实验更具现实性。

  3. Complex Doppler effect in left-handed metamaterials

    CERN Document Server

    Ziemkiewicz, David

    2014-01-01

    The Doppler shift is investigated in one-dimensional system with moving source. Theoretical findings are confirmed in numerical simulations of optical and acoustical waves propagation in simple metamaterial model, showing the reversed shift and the existence of multiple frequency modes. The properties of these waves are discussed. The effect of absorption on the phenomenon is outlined.

  4. How to Study the Doppler Effect with Audacity Software

    Science.gov (United States)

    Dias, Marco Adriano; Carvalho, Paulo Simeão; Ventura, Daniel Rodrigues

    2016-01-01

    The Doppler effect is one of the recurring themes in college and high school classes. In order to contextualize the topic and engage the students in their own learning process, we propose a simple and easily accessible activity, i.e. the analysis of the videos available on the internet by the students. The sound of the engine of the vehicle…

  5. Laser Doppler velocimetry measurement of turbulent bubbly channel flow

    Energy Technology Data Exchange (ETDEWEB)

    So, S.; Takagi, S.; Matsumoto, Y. [Department of Mechanical Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656 (Japan); Morikita, H. [Morikita Shuppan Co. Ltd, 1-4-11,Fujimi Chiyoda-ku, Tokyo 102-0071 (Japan)

    2002-07-01

    Measurements of the turbulence properties of gas-liquid bubbly flows with mono-dispersed 1-mm-diameter bubbles are reported for upward flow in a rectangular channel. Bubble size and liquid-phase velocity were measured using image-processing and laser Doppler velocimetry (LDV), respectively. A description is given of the special arrangements for two-dimensional LDV needed to obtain reliable bubbly flow data, in particular the configuration of the optical system, the distinction of signals from the bubbles and liquid phase. To create the mono-dispersed bubbles, a small amount of surfactant (3-pentanol of 20 ppm) was added to the flow. Whilst this caused a drastic change in bubble size distribution and flow field, it did not affect the turbulence properties of the single-phase flow. In this study, experiments with three different bulk Reynolds numbers (1,350, 4,100, 8,200) were conducted with void fractions less than 1.2%. In all three cases, there was a very high accumulation of bubbles near the wall with bubble slip at the wall. The mean velocity profile of the liquid phase was steeper near the wall owing to the driving force of buoyant bubbles, and the streamwise turbulent intensity in the vicinity of the wall was enhanced. Furthermore the mean velocity profiles of the liquid phase were flattened in the wide region around the channel center. This region was lifted up by the bubble sheet near the wall, giving it a plug-like flow structure. In addition, the turbulent fluctuation and Reynolds stress in the liquid phase are very much suppressed in this region. This strong preferential accumulation near the wall produces the dramatic change of the whole flow structure. (orig.)

  6. Laser Doppler velocimetry measurement of turbulent bubbly channel flow

    Science.gov (United States)

    So, S.; Morikita, H.; Takagi, S.; Matsumoto, Y.

    2002-05-01

    Measurements of the turbulence properties of gas-liquid bubbly flows with mono-dispersed 1-mm-diameter bubbles are reported for upward flow in a rectangular channel. Bubble size and liquid-phase velocity were measured using image-processing and laser Doppler velocimetry (LDV), respectively. A description is given of the special arrangements for two-dimensional LDV needed to obtain reliable bubbly flow data, in particular the configuration of the optical system, the distinction of signals from the bubbles and liquid phase. To create the mono-dispersed bubbles, a small amount of surfactant (3-pentanol of 20 ppm) was added to the flow. Whilst this caused a drastic change in bubble size distribution and flow field, it did not affect the turbulence properties of the single-phase flow. In this study, experiments with three different bulk Reynolds numbers (1,350, 4,100, 8,200) were conducted with void fractions less than 1.2%. In all three cases, there was a very high accumulation of bubbles near the wall with bubble slip at the wall. The mean velocity profile of the liquid phase was steeper near the wall owing to the driving force of buoyant bubbles, and the streamwise turbulent intensity in the vicinity of the wall was enhanced. Furthermore the mean velocity profiles of the liquid phase were flattened in the wide region around the channel center. This region was lifted up by the bubble sheet near the wall, giving it a plug-like flow structure. In addition, the turbulent fluctuation and Reynolds stress in the liquid phase are very much suppressed in this region. This strong preferential accumulation near the wall produces the dramatic change of the whole flow structure.

  7. In vitro comparison of Doppler and catheter-measured pressure gradients in 3D models of mitral valve calcification.

    Science.gov (United States)

    Herrmann, Tarrah A; Siefert, Andrew W; Pressman, Gregg S; Gollin, Hannah R; Touchton, Steven A; Saikrishnan, Neelakantan; Yoganathan, Ajit P

    2013-09-01

    Mitral annular calcification (MAC) involves calcium deposition in the fibrous annulus supporting the mitral valve (MV). When calcification extends onto the leaflets, valve opening can be restricted. The influence of MAC MV geometry on Doppler gradients is unknown. This study describes a novel methodology to rapid-prototype subject-specific MAC MVs. Replicated valves were used to assess the effects of distorted annular-leaflet geometry on Doppler-derived, transmitral gradients in comparison to direct pressure measurements and to determine if transmitral gradients vary according to measurement location. Three-dimensional echocardiography data sets were selected for two MAC MVs and one healthy MV. These MVs were segmented and rapid prototyped in their middiastolic configuration for in vitro testing. The effects of MV geometry, measurement modality, and measurement location on transmitral pressure gradient were assessed by Doppler and catheter at three locations along the MV's intercommissural axis. When comparing dimensions of the rapid-prototyped valves to the subject echocardiography data sets, mean relative errors ranged from 6.2% to 35%. For the evaluated MVs, Doppler pressure gradients exhibited good agreement with catheter-measured gradients at a variety of flow rates, though with slight systematic overestimation in the recreated MAC valves. For all of the tested MVs, measuring the transmitral pressure gradient at differing valve orifice positions had minimal impact on observed gradients. Upon the testing of additional normal and calcific MVs, these data may contribute to an improved clinical understanding of MAC-related mitral stenosis. Moreover, they provide the ability to statistically evaluate between measurement locations, flow rates, and valve geometries for Doppler-derived pressure gradients. Determining these end points will contribute to greater clinical understanding for the diagnosis MAC patients and understanding the use and application of Doppler

  8. Potential scientific research which will benefit from an airborne Doppler lidar measurement system

    Science.gov (United States)

    Frost, W.

    1980-01-01

    Areas of research which can be significantly aided by the Doppler lidar airborne system are described. The need for systematic development of the airborne Doppler lidar is discussed. The technology development associated with the systematic development of the system will have direct application to satellite systems for which the lidar also promises to be an effective instrument for atmospheric research.

  9. Minimally destructive, Doppler measurement of a quantized flow in a ring-shaped Bose-Einstein condensate

    Science.gov (United States)

    Kumar, A.; Anderson, N.; Phillips, W. D.; Eckel, S.; Campbell, G. K.; Stringari, S.

    2016-02-01

    The Doppler effect, the shift in the frequency of sound due to motion, is present in both classical gases and quantum superfluids. Here, we perform an in situ, minimally destructive measurement, of the persistent current in a ring-shaped, superfluid Bose-Einstein condensate using the Doppler effect. Phonon modes generated in this condensate have their frequencies Doppler shifted by a persistent current. This frequency shift will cause a standing-wave phonon mode to be ‘dragged’ along with the persistent current. By measuring this precession, one can extract the background flow velocity. This technique will find utility in experiments where the winding number is important, such as in emerging ‘atomtronic’ devices.

  10. Acute effects of lateral thigh foam rolling on arterial tissue perfusion determined by spectral Doppler and Power Doppler ultrasound.

    Science.gov (United States)

    T, Hotfiel; B, Swoboda; S, Krinner; C, Grim; M, Engelhardt; M, Uder; R, Hei

    2016-09-23

    Foam rolling has been developed as a popular intervention in training and rehabilitation. However, evidence on its effects on the cellular and physiological level is lacking. The aim of this study was to assess the effect of foam rolling on arterial blood flow of the lateral thigh. Twenty-one healthy participants (age 25 ± 2 years, height 177 ± 9 cm, body weight 74 ± 9 kg) were recruited from the medical and sports faculty. Arterial tissue perfusion was determined by spectral Doppler and power Doppler ultrasound, represented as peak flow (Vmax), time average velocity maximum (TAMx), time average velocity mean (TAMn), and resistive index (RI), and with semiquantitative grading that was assessed by four blind-folded investigators. Measurement values were assessed under resting conditions and twice after foam rolling exercises of the lateral thigh (0 min and 30 min post intervention). The trochanteric region, mid portion, and distal tibial insertion of the lateral thigh were representative for data analysis. Arterial blood flow of the lateral thigh increased significantly following foam rolling exercises compared to baseline (p<0.05). We detected a relative increase in Vmax of 73.6% (0 min) and 52.7 % (30 min) (p<0.001), in TAMx of 53.2% (p<0.001) and 38.3 % (p=0.002), and in TAMn of 84.4% (p<0.001) and 68.2 % (p<0.001). Semiquantitative Power Doppler scores at all portions revealed increased average grading of 1.96 after intervention and 2.04 after 30 min compared to 0.75 at baseline. Our results may contribute to the understanding of local physiological reactions to self-myofascial release.

  11. Measuring Turbulence from Moored Acoustic Doppler Velocimeters. A Manual to Quantifying Inflow at Tidal Energy Sites

    Energy Technology Data Exchange (ETDEWEB)

    Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thomson, Jim [Univ. of Washington, Seattle, WA (United States); Talbert, Joe [Univ. of Washington, Seattle, WA (United States); DeKlerk, Alex [Univ. of Washington, Seattle, WA (United States)

    2016-03-01

    This work details a methodology for measuring hub height inflow turbulence using moored acoustic Doppler velocimiters (ADVs). This approach is motivated by the shortcomings of alternatives. For example, remote velocity measurements (i.e., from acoustic Doppler profilers) lack sufficient precision for device simulation, and rigid tower-mounted measurements are very expensive and technically challenging in the tidal environment. Moorings offer a low-cost, site-adaptable and robust deployment platform, and ADVs provide the necessary precision to accurately quantify turbulence.

  12. A comparison of a coaxial focused laser Doppler system in atmospheric measurements

    Science.gov (United States)

    Karaki, S.

    1973-01-01

    Measurements of atmospheric velocities and turbulence with the laser Doppler system were obtained, and the results compared with cup anemometer and hot-wire measurements in the same wind field. The laser Doppler velocimeter (LDV) is described along with the test procedures. It was found that mean values determined from the LDV data are within 5% of other anemometer data for long time periods, and the LDV measures higher velocities.

  13. High-Energy 2-Micrometers Doppler Lidar for Wind Measurements

    Science.gov (United States)

    Koch, Grady J.; Beyon, Jeffrey Y.; Barnes, Bruce W.; Petros, Mulugeta; Yu, Jirong; Amzajerdian, Farzin; Kavaya, Michael J.; Singh, Upendra N.

    2006-01-01

    High-energy 2-micrometer wavelength lasers have been incorporated in a prototype coherent Doppler lidar to test component technologies and explore applications for remote sensing of the atmosphere. Design of the lidar is presented including aspects in the laser transmitter, receiver, photodetector, and signal processing. Calibration tests and sample atmospheric data are presented on wind and aerosol profiling.

  14. Depth-encoded dual beam phase-resolved Doppler OCT for Doppler-angle-independent flow velocity measurement

    Science.gov (United States)

    Qian, Jie; Cheng, Wei; Cao, Zhaoyuan; Chen, Xinjian; Mo, Jianhua

    2017-02-01

    Phase-resolved Doppler optical coherence tomography (PR-D-OCT) is a functional OCT imaging technique that can provide high-speed and high-resolution depth-resolved measurement on flow in biological materials. However, a common problem with conventional PR-D-OCT is that this technique often measures the flow motion projected onto the OCT beam path. In other words, it needs the projection angle to extract the absolute velocity from PR-D-OCT measurement. In this paper, we proposed a novel dual-beam PR-D-OCT method to measure absolute flow velocity without separate measurement on the projection angle. Two parallel light beams are created in sample arm and focused into the sample at two different incident angles. The images produced by these two beams are encoded to different depths in single B-scan. Then the Doppler signals picked up by the two beams together with the incident angle difference can be used to calculate the absolute velocity. We validated our approach in vitro on an artificial flow phantom with our home-built 1060 nm swept source OCT. Experimental results demonstrated that our method can provide an accurate measurement of absolute flow velocity with independency on the projection angle.

  15. Novel Analytic Method for Determining Micro-Doppler Measurement Sensitivity in Life-detection Radar

    Directory of Open Access Journals (Sweden)

    Hu Cheng

    2016-10-01

    Full Text Available In recent years, a new non-contact life detecting device has been developed, known as life-detection radar, which can measure bodily movement and locate human subjects. Typically, the amplitude of the vibration being measured is quite small, so the measurement is easily contaminated by noise in the radar system. To date, there is no effective index for judging the influence of noise on the vibration measurements in this radar system. To solve this problem, in this paper, we define the micro-Doppler measurement sensitivity to analyze the influence of noise on the measurement. We then perform a simulation to generate a performance curve for the radar system.

  16. Ultrasonic position and velocity measurement for a moving object by M-sequence pulse compression using Doppler velocity estimation by spectrum-pattern analysis

    Science.gov (United States)

    Ikari, Yohei; Hirata, Shinnosuke; Hachiya, Hiroyuki

    2015-07-01

    Pulse compression using a maximum-length sequence (M-sequence) can improve the signal-to-noise ratio (SNR) of the reflected echo in the pulse-echo method. In the case of a moving object, however, the echo is modulated owing to the Doppler effect. The Doppler-shifted M-sequence-modulated signal cannot be correlated with the reference signal that corresponds to the transmitted M-sequence-modulated signal. Therefore, Doppler velocity estimation by spectrum-pattern analysis of a cyclic M-sequence-modulated signal and cross correlations with Doppler-shifted reference signals that correspond to the estimated Doppler velocities has been proposed. In this paper, measurements of the position and velocity of a moving object by the proposed method are described. First, Doppler velocities of the object are estimated using a microphone array. Secondly, the received signal from each microphone is correlated with each Doppler-shifted reference signal. Then, the position of the object is determined from the B-mode image formed from all cross-correlation functions. After that, the velocity of the object is calculated from velocity components estimated from the Doppler velocities and the position. Finally, the estimated Doppler velocities, determined positions, and calculated velocities are evaluated.

  17. Quantitative Doppler measures in coiled vessels: investigation on excised umbilical veins.

    Science.gov (United States)

    Guiot, C; Roatta, S; Piccoli, E; Saccomandi, F; Todros, T

    1999-11-01

    Quantitative assessment of umbilical venous blood velocity with Doppler ultrasound (US) must cope with the coiled structure of the vein inside the cord. Both an experimental and a theoretical approach showed remarkable variations in the insonation angle when the probe was moved along the vein, provided the inclination between the Doppler probe and the cord was kept constant. Inaccurate signal processing, stochastic variability and flow disturbances could, however, mask the influence of the geometry. The above hypotheses were assessed by investigating five cords in vitro a few hours after delivery from normal pregnancies at term. The Doppler signal was sampled at different sites along each cord and the mean Doppler shift estimated by FFT spectral analysis, both directly and through the noise rejection D'Alessio's algorithm, which proved effective in improving the Doppler shift estimate in condition of low signal-to-noise ratio (SNR).

  18. A method to measure the movement of a rough plane ultrasonically by Doppler - phase shift

    Science.gov (United States)

    Kortelainen, Juha

    The Doppler effect has been used to measure the horizontal movement of a rough plane. The operational principle is based on the measurement of the phase shift of an ultrasonic wave scattered from the surface. This method has been developed for measuring the length of logs in a forest machine. Equations for the Doppler phase shift have been derived for the situation where the moving object is a single particle. Later this 'one-particle-theory' has been expanded for the situation where the moving object is a rough plane. The theory uses some simplifications and assumptions from the reality, but the results still agree well with measurements. This method has been tested by moving logs with a velocity varying from 0 to 1 m/s. The variability of measurement with different kind of logs was about 0.3 ... 2% when the movement was about one meter. The analysis of the errors and ideas to compensate them are presented in the paper.

  19. Michelson interferometer null may confirm transverse Doppler Effect

    CERN Document Server

    Woodruff, Robert A

    2014-01-01

    We analyze fringe formation within Michelson-like experiments as viewed by relativistic inertial observers. Our analysis differs from previous work because we include optical misalignment of the beamsplitter of the interferometer due to the anamorphic geometry of relativistic Lorentz contraction. We conclude that inertial frame equivalence of Michelson-like experiments provide verification of the transverse Doppler Effect and exclude any model incorporating the relativistic Lorentz contraction effect.

  20. An Assessment of Wind Plant Complex Flows Using Advanced Doppler Radar Measurements

    Science.gov (United States)

    Gunter, W. S.; Schroeder, J.; Hirth, B.; Duncan, J.; Guynes, J.

    2015-12-01

    As installed wind energy capacity continues to steadily increase, the need for comprehensive measurements of wind plant complex flows to further reduce the cost of wind energy has been well advertised by the industry as a whole. Such measurements serve diverse perspectives including resource assessment, turbine inflow and power curve validation, wake and wind plant layout model verification, operations and maintenance, and the development of future advanced wind plant control schemes. While various measurement devices have been matured for wind energy applications (e.g. meteorological towers, LIDAR, SODAR), this presentation will focus on the use of advanced Doppler radar systems to observe the complex wind flows within and surrounding wind plants. Advanced Doppler radars can provide the combined advantage of a large analysis footprint (tens of square kilometers) with rapid data analysis updates (a few seconds to one minute) using both single- and dual-Doppler data collection methods. This presentation demonstrates the utility of measurements collected by the Texas Tech University Ka-band (TTUKa) radars to identify complex wind flows occurring within and nearby operational wind plants, and provide reliable forecasts of wind speeds and directions at given locations (i.e. turbine or instrumented tower sites) 45+ seconds in advance. Radar-derived wind maps reveal commonly observed features such as turbine wakes and turbine-to-turbine interaction, high momentum wind speed channels between turbine wakes, turbine array edge effects, transient boundary layer flow structures (such as wind streaks, frontal boundaries, etc.), and the impact of local terrain. Operational turbine or instrumented tower data are merged with the radar analysis to link the observed complex flow features to turbine and wind plant performance.

  1. Laser and acoustic Doppler techniques for the measurement of fluid velocities

    Science.gov (United States)

    Cliff, W. C.

    1975-01-01

    An overview of current laser and acoustic Doppler techniques is presented. Results obtained by Doppler anemometry and conventional sensors are compared. Comparisons include simultaneous velocity measurements by hot wire and a three-dimensional laser anemometer made in a gaseous pipe flow as well as direct comparisons of atmospheric velocities measured with propeller and cup anemometry. Scanning techniques are also discussed. Conclusions and recommendations for future work are presented.

  2. Monostatic Doppler lidar using an Nd:YAG laser for wind-velocity measurement

    Science.gov (United States)

    Bersenev, V. I.; Kaptsov, L. N.; Priezzhev, A. V.

    1987-10-01

    A monostatic Doppler lidar using a CW Nd:YAG laser has been developed for measurements of wind velocity. A series of atmospheric measurements using this lidar was carried out. At medium turbulence levels, the limiting lidar range is 200 m. As compared with a CO2 Doppler lidar, the Nd:YAG lidar has a better spatial resolution, is more convenient to use, and does not require a cooled photodetector.

  3. Cerebrovascular reactivity in migraineurs as measured by transcranial Doppler

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, T.D.; Harpold, G.J. (Alabama Univ., Birmingham, AL (USA). School of Medicine); Troost, B.T. (Bowman Gray School of Medicine, Winston-Salem, NC (USA))

    1990-04-01

    Transcranial Doppler ultrasound is a relatively new diagnostic modality which allows the non-invasive assessment of intracranial circulation. A total of 10 migraine patients were studied and compared to healthy controls without headaches. Migraineurs during the headache-free interval demonstrated excessive cerebrovascular reactivity to CO{sub 2}, evidenced by an increase in middle cerebral artery blood flow velocity of 47% {plus minus} 15% compared to 28% {plus minus} 14% in controls. Differences between the two study groups revealed no significant decrease in middle cerebral artery blood flow velocity with hypocapnia. However, the differences between middle cerebral artery blood flow velocity during hyperventilation and CO{sub 2} inhalation were significantly different comparing migraineurs and controls. Instability of the baseline blood flow velocities was also noted in migraineurs during the interictal period. Characteristics which may allow differentiation of migraineurs from other headache populations could possibly be obtained from transcranial Doppler ultrasound flow studies. 24 refs., 2 tabs.

  4. Torsional vibration measurements on rotating shaft system using laser doppler vibrometer

    Science.gov (United States)

    Xiang, Ling; Yang, Shixi; Gan, Chunbiao

    2012-11-01

    In this work, a laser torsional vibrameter was used to measure the torsion vibration of a rotating shaft system under electrical network impact. Based on the principles of laser Doppler velocimetry, the laser torsional vibrometer (LTV) are non-contact measurement of torsional oscillation of rotating shafts, offering significant advantages over conventional techniques. Furthermore, a highly complex shafting system is analyzed by a modified Riccati torsional transfer matrix. The system is modeled as a chain consisting of an elastic spring with concentrated mass points, and the multi-segments lumped mass model is established for this shafting system. By the modified Riccati torsional transfer matrix method, an accumulated calculation is effectively eliminated to obtain the natural frequencies. The electrical network impacts can activize the torsional vibration of shaft system, and the activized torsion vibration frequencies contained the natural frequencies of shaft system. The torsional vibrations of the shaft system were measured under electrical network impacts in laser Doppler torsional vibrometer. By comparisons, the natural frequencies by measurement were consistent with the values by calculation. The results verify the instrument is robust, user friendly and can be calibrated in situ. The laser torsional vibrometer represents a significant step forward in rotating machinery diagnostics.

  5. Measurement of the Resonant Characteristics of a Single Bubble Vibration by Using a Laser Doppler Vibrometer

    Science.gov (United States)

    Yoshikawa, Taisuke; Kotera, Hironori; Yoshida, Kenji; Koyama, Daisuke; Nakamura, Kentaro; Watanabe, Yoshiaki

    2011-07-01

    We constructed the experimental system with a laser Doppler vibrometer (LDV) for measuring the vibration of a single microbubble. It was demonstrated that the system enabled the capture of the vibration with an amplitude of nanometer order. We attempted to experimentally measure the resonant characteristics of a bubble attached to a wall by using the system. As a result, we succeeded in measuring the characteristics and evaluating the Q factor and the resonant radius at a driving frequency of 27.8 kHz, although these values are different from those predicted on the basis of the theory for a single free bubble. The LDV measurement system is expected to an effective tool for evaluating bubble vibrations with very small displacement amplitudes, such as the vibration of a microcapsule.

  6. A Tracking Filter in Spherical Coordinates Enhanced by De-noising of Converted Doppler Measurements

    Institute of Scientific and Technical Information of China (English)

    ZHOU Gongjian; YU Changjun; CUI Naigang; QUAN Taifan

    2012-01-01

    Tracking problem in spherical coordinates with range rate (Doppler) measurements,which would have errors correlated to the range measurement errors,is investigated in this paper.The converted Doppler measurements,constructed by the product of the Doppler measurements and range measurements,are used to replace the original Doppler measurements.A de-noising method based on an unbiased Kalman filter (KF) is proposed to reduce the converted Doppler measurement errors before updating the target states for the constant velocity (CV) model.The states from the de-noising filter are then combined with the Cartesian states from the converted measurement Kalman filter (CMKF) to produce final state estimates.The nonlinearity of the de-noising filter states are handled by expanding them around the Cartesian states from the CMKF in a Taylor series up to the second order term.In the mean time,the correlation between the two filters caused by the common range measurements is handled by a minimum mean squared error (MMSE) estimation-based method.These result in a new tracking filter,CMDN-EKF2.Monte Carlo simulations demonstrate that the proposed tracking filter can provide efficient and robust performance with a modest computational cost.

  7. [Determining the aortic and renal hemodynamic effects of propofol on rabbits using Doppler ultrasonography].

    Science.gov (United States)

    Apan, Alpaslan; Karadeniz Bilgili, M Yasemin; Cağlayan, Fatma

    2004-03-01

    The hemodynamic effects of propofol-fentanyl anesthesia were known to reduce arterial pressure and heart rate. We aimed to determine the effects of propofol-fentanyl anesthesia on renal artery blood flow and aorta by using Doppler ultrasonography on an animal model. The study was conducted on 8 male New Zaeland White strain rabbits. The initial aortic and renal hemodynamic measurements were determined on animals using ketamin anesthesia. Later the right femoral arteries were cannulated for determining arterial blood pressure and pulse oximetry was followed from the ear. Propofol 5-7 mg/kg with fentanyl 1-2 microg/kg was injected via the ear vein. Doppler parameters (RI, RI, Vmax, Vmin) of the renal artery and aorta were determined after the anesthesia. According to the basal measurements, arterial blood pressure and breath rates declined significantly (27% and 53% respectively, p<0.05); however there were no statistical alteration of aortic and renal artery Doppler parameters. Anesthesia induced by propofol-fentanyl did not induce a statistically significant difference in Doppler parameters obtained from the renal artery and aorta. It is clinically important to know that determining the changes in RI and PI during the postoperative period is not related to the propofol-fentanyl anesthesia.

  8. Taking laser Doppler vibrometry off the tripod: correction of measurements affected by instrument vibration

    Science.gov (United States)

    Halkon, Ben J.; Rothberg, Steve J.

    2017-04-01

    Laser Doppler vibrometers (LDVs) are now well-established as an effective non-contact alternative to traditional contacting transducers. Despite 30 years of successful applications, however, very little attention has been given to sensitivity to vibration of the instrument itself. In this paper, the sensitivity to instrument vibration is confirmed before development theoretically and experimentally of a practical scheme to enable correction of measurements for arbitrary instrument vibration. The scheme requires a pair of correction sensors with appropriate orientation and relative location, while using frequency domain processing to accommodate inter-channel time delay and signal integrations. Error reductions in excess of 30 dB are delivered in laboratory tests with simultaneous instrument and target vibration over a broad frequency range. Ultimately, application to measurement on a vehicle simulator experiencing high levels of vibration demonstrates the practical nature of the correction technique and its robustness in a challenging measurement environment.

  9. The Doppler Effect and Spectral Energy Distribution of Blazars

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The relativistic beaming model is adopted to discuss quantitatively the observational differences between radio-selected BL Lac objects (RBLs) and X-ray-selected BL Lac objects (XBLs), and between BL Lac objects and fiat spectrum radio quasars (FSRQs). The main results are the following: (1) In the Doppler cor-rected color-color (αin ro-αin ox -αox) diagram, XBLs and FSRQs occupy separated regions,while RBLs bridge the gap between them. These properties suggest that similar in- trinsic physical processes operate in all the objects under a range of intrinsic physical conditions. (2) Our results are consistent with the results of Sambruna, Maraschi and Urry (1996) from other methods. We show the αxox introduced by Sambruna to be a good index for describing the energy distribution because it represents the intrinsic energy distribution and includes the Doppler correction. (3) The Doppler effect of relativistic beaming is the main mechanism, and the physical differences (such as magnetic fields, electron energies) are also important complementary fac-tors for understanding the relation between XBLs and RBLs;

  10. Extremely high-frequency micro-Doppler measurements of humans

    Science.gov (United States)

    Hedden, Abigail S.; Silvious, Jerry L.; Dietlein, Charles R.; Green, Jeremy A.; Wikner, David A.

    2014-05-01

    The development of sensors that are capable of penetrating smoke, dust, fog, clouds, and rain is critical for maintaining situational awareness in degraded visual environments and for providing support to the Warfighter. Atmospheric penetration properties, the ability to form high-resolution imagery with modest apertures, and available source power make the extremely high-frequency (EHF) portion of the spectrum promising for the development of radio frequency (RF) sensors capable of penetrating visual obscurants. Comprehensive phenomenology studies including polarization and backscatter properties of relevant targets are lacking at these frequencies. The Army Research Laboratory (ARL) is developing a fully-polarimetric frequency-modulated continuous-wave (FMCW) instrumentation radar to explore polarization and backscatter properties of in-situ rain, scattering from natural and man-made surfaces, and the radar cross section and micro-Doppler signatures of humans at EHF frequencies, specifically, around the 220 GHz atmospheric window. This work presents an overview of the design and construction of the radar system, hardware performance, data acquisition software, and initial results including an analysis of human micro-Doppler signatures.

  11. Mucosal blood flow measurements using laser Doppler perfusion monitoring

    Institute of Scientific and Technical Information of China (English)

    Dag Arne Lihaug Hoff; Hans Gregersen; Jan Gunnar Hatlebakk

    2009-01-01

    Perfusion of individual tissues is a basic physiological process that is necessary to sustain oxygenation and nutrition at a cellular level. Ischemia, or the insufficiency of perfusion, is a common mechanism for tissue death or degeneration, and at a lower threshold, a mechanism for the generation of sensory signalling including pain. It is of considerable interest to study perfusion of peripheral abdominal tissues in a variety of circumstances. Microvascular disease of the abdominal organs has been implicated in the pathogenesis of a variety of disorders, including peptic ulcer disease, inflammatory bowel disease and chest pain. The basic principle of laser Doppler perfusion monitoring (LDPM) is to analyze changes in the spectrum of light reflected from tissues as a response to a beam of monochromatic laser light emitted. It reflects the total local microcirculatory blood perfusion, including perfusion in capillaries, arterioles, venules and shunts. During the last 20-25 years, numerous studies have been performed in different parts of the gastrointestinal (GI) tract using LDPM. In recent years we have developed a multi-modal catheter device which includes a laser Doppler probe, with the intent primarily to investigate patients suffering from functional chest pain of presumed oesophageal origin. Preliminary studies show the feasibility of incorporating LDPM into such catheters for performing physiological studies in the GI tract. LDPM has emerged as a research and clinical tool in preference to other methods; but, it is important to be aware of its limitations and account for them when reporting results.

  12. Time series analysis of continuous-wave coherent Doppler Lidar wind measurements

    DEFF Research Database (Denmark)

    Sjöholm, Mikael; Mikkelsen, Torben; Mann, Jakob

    2008-01-01

    The influence of spatial volume averaging of a focused 1.55 mu m continuous-wave coherent Doppler Lidar on observed wind turbulence measured in the atmospheric surface layer over homogeneous terrain is described and analysed. Comparison of Lidar-measured turbulent spectra with spectra simultaneou......The influence of spatial volume averaging of a focused 1.55 mu m continuous-wave coherent Doppler Lidar on observed wind turbulence measured in the atmospheric surface layer over homogeneous terrain is described and analysed. Comparison of Lidar-measured turbulent spectra with spectra...

  13. Repeatability, variability and reference values of pulsed wave Doppler echocardiographic measurements in healthy Saanen goats

    Directory of Open Access Journals (Sweden)

    Leroux Aurélia A

    2012-10-01

    Full Text Available Abstract Background Pulsed wave (PW Doppler echocardiography has become a routine non invasive cardiac diagnostic tool in most species. However, evaluation of intracardiac blood flow requires reference values, which are poorly documented in goats. The aim of this study was to test the repeatability, the variability, and to establish the reference values of PW measurements in healthy adult Saanen goats. Using a standardised PW Doppler echocardiographic protocol, 10 healthy adult unsedated female Saanen goats were investigated three times at one day intervals by the same observer. Mitral, tricuspid, aortic and pulmonary flows were measured from a right parasternal view, and mitral and aortic flows were also measured from a left parasternal view. The difference between left and right side measurements and the intra-observer inter-day repeatability were tested and then the reference values of PW Doppler echocardiographic parameters in healthy adult female Saanen goats were established. Results As documented in other species, all caprine PW Doppler parameters demonstrated a poor inter-day repeatability and a moderate variability. Tricuspid and pulmonary flows were best evaluated on the right side whereas mitral and aortic flows were best obtained on the left side, and reference values are reported for healthy adult Saanen goats. Conclusions PW Doppler echocardiography allows the measurement of intracardiac blood flow indices in goats. The reference values establishment will help interpreting these indices of cardiac function in clinical cardiac cases and developing animal models for human cardiology research.

  14. Frequency modulation via the Doppler effect in optical fibers.

    Science.gov (United States)

    Oberson, P; Huttner, B; Gisin, N

    1999-04-01

    We present the principle of optical frequency modulation via the Doppler effect obtained by rapidly stretching an optical fiber and thus modifying the optical path of the light propagating in the fiber. This procedure creates a pure frequency shift, with no degradation of the spectrum. Moreover, the effect is wavelength independent and can therefore be applied to any type of light source. We show an experimental realization in which a frequency excursion of ~100 MHz was obtained with a bobbin vibrating at 180 Hz.

  15. Geometric doppler effect: spin-split dispersion of thermal radiation.

    Science.gov (United States)

    Dahan, Nir; Gorodetski, Yuri; Frischwasser, Kobi; Kleiner, Vladimir; Hasman, Erez

    2010-09-24

    A geometric Doppler effect manifested by a spin-split dispersion relation of thermal radiation is observed. A spin-dependent dispersion splitting was obtained in a structure consisting of a coupled thermal antenna array. The effect is due to a spin-orbit interaction resulting from the dynamics of the surface waves propagating along the structure whose local anisotropy axis is rotated in space. The observation of the spin-symmetry breaking in thermal radiation may be utilized for manipulation of spontaneous or stimulated emission.

  16. A measurement approach based on micro-Doppler maps for signature and motion analysis

    Science.gov (United States)

    Ricci, R.; Sona, A.

    2013-05-01

    In this paper, a novel and comprehensive measurement approach is proposed for the detection and analysis of human motion signature. The approach combines theoretical concepts and tools of micro-Doppler theory, image processing, and human modeling, in a original way. The attention is primarily focused on the description of the most meaningful parameters influencing the accuracy of the obtained signature. The ultimate purpose is to provide a framework through which organizing, comparing, and merging future research activities, ideas and results in the field of human motion signature analysis for security, health and disaster recovery purposes. Some simulation and experimental results underlying the feasibility and effectiveness of the measurement approach are also summarized and analyzed.

  17. Photoacoustic Doppler effect from flowing small light-absorbing particles.

    Science.gov (United States)

    Fang, Hui; Maslov, Konstantin; Wang, Lihong V

    2007-11-01

    From the flow of a suspension of micrometer-scale carbon particles, the photoacoustic Doppler shift is observed. As predicted theoretically, the observed Doppler shift equals half of that in Doppler ultrasound and does not depend on the direction of laser illumination. This new physical phenomenon provides a basis for developing photoacoustic Doppler flowmetry, which can potentially be used for detecting fluid flow in optically scattering media and especially low-speed blood flow of relatively deep microcirculation in biological tissue.

  18. 3D velocity measurement by a single camera using Doppler phase-shifting holography

    Science.gov (United States)

    Ninomiya, Nao; Kubo, Yamato; Barada, Daisuke; Kiire, Tomohiro

    2016-10-01

    In order to understand the details of the flow field in micro- and nano-fluidic devices, it is necessary to measure the 3D velocities under a microscopy. Thus, there is a strong need for the development of a new measuring technique for 3D velocity by a single camera. One solution is the use of holography, but it is well known that the accuracy in the depth direction is very poor for the commonly used in-line holography. At present, the Doppler phase-shifting holography is used for the 3D measurement of an object. This method extracts the signal of a fixed frequency caused by the Doppler beat between the object light and the reference light. It can measure the 3D shape precisely. Here, the frequency of the Doppler beat is determined by the velocity difference between the object light and the reference light. This implies that the velocity of an object can be calculated by the Doppler frequency. In this study, a Japanese 5 yen coin was traversed at a constant speed and its holography has been observed by a high-speed camera. By extracting only the first order diffraction signal at the Doppler frequency, a precise measurement of the shape and the position of a 5 yen coin has been achieved. At the same time, the longitudinal velocity of a 5 yen coin can be measured by the Doppler frequency. Furthermore, the lateral velocities are obtained by particle image velocimetry (PIV) method. A 5 yen coin has been traversed at different angles and its shapes and the 3D velocities have been measured accurately. This method can be applied to the particle flows in the micro- or nano-devices, and the 3D velocities will be measured under microscopes.

  19. Improved Prediction of the Doppler Effect in TRISO Fuel

    Energy Technology Data Exchange (ETDEWEB)

    J. Ortensi; A.M. Ougouag

    2009-05-01

    The Doppler feedback mechanism is a major contributor to the passive safety of gas-cooled, graphite-moderated High Temperature Reactors that use fuel based on TRISO particles. It follows that the correct prediction of the magnitude and time-dependence of this feedback effect is essential to the conduct of safety analyses for these reactors. Since the effect is directly dependent on the actual temperature reached by the fuel during transients, the underlying phenomena of heat transfer and temperature rise must be correctly predicted. This paper presents an improved model for the TRISO particle and its thermal behavior during transients. The improved approach incorporates an explicit TRISO heat conduction model to better quantify the time dependence of the temperature in the various layers of the TRISO particle, including its fuel central zone. There follows a better treatment of the Doppler Effect within said fuel zone. The new model is based on a 1-D analytic solution for composite media using the Green’s function technique. The modeling improvement takes advantage of some of the physical behavior of TRISO fuel under irradiation and includes a distinctive look at the physics of the neutronic Doppler Effect. The new methodology has been implemented within the coupled R-Z nodal diffusion code CYNOD-THERMIX. The new model has been applied to the analysis of earthquakes (presented in a companion paper). In this paper, the model is applied to the control rod ejection event, as specified in the OECD PBMR-400 benchmark, but with temperature dependent thermal properties. The results obtained for this transient using the enhanced code are a considerable improvement over the predictions of the original code. The incorporation of the enhanced model shows that the Doppler Effect plays a more significant role than predicted by the original unenhanced model based on the THERMIX homogenized fuel region model. The new model shows that the overall energy generation during the rod

  20. Determination of the Ion Velocity Distribution in a Rotating Plasma from Measurements of Doppler Broadening

    DEFF Research Database (Denmark)

    Jørgensen, L. W.; Sillesen, Alfred Hegaard

    1979-01-01

    The Doppler-broadened profile of the He II 4685.75 AA line was measured along a chord in a rotating plasma, transverse to the magnetic field. Using a single-particle orbit picture, the corresponding velocity spectrum of ions confirm the measurements, so it can be concluded that the single......-particle orbit picture is valid for the discharge period under investigation, except for the first few microseconds during breakdown when a strong interaction between plasma and remaining neutral gas takes place by Alfvens critical velocity mechanism. A simple relation is given between the measured half......-width and shift of the Doppler profile and the macroscopic quantities of ion velocity and energy. Several Doppler-broadened profiles are shown for different plasma parameters....

  1. Maritime target and sea clutter measurements with a coherent Doppler polarimetric surveillance radar

    NARCIS (Netherlands)

    Smith, A.J.E.; Gelsema, S.J.; Kester, L.J.H.M.; Melief, H.W.; Premel Cabic, G.; Theil, A.; Woudenberg, E.

    2002-01-01

    Doppler polarimetry in a surveillance radar for the maritime surface picture is considered. This radar must be able to detect low-RCS targets in littoral environments. Measurements on such targets have been conducted with a coherent polarimetric measurement radar in March 2001 and preliminary

  2. LASER-DOPPLER BLOOD FLOWMETRY USING 2 WAVELENGTHS - MONTE-CARLO SIMULATIONS AND MEASUREMENTS

    NARCIS (Netherlands)

    KOELINK, MH; DEMUL, FFM; GREVE, J; GRAAFF, R; DASSEL, ACM; AARNOUDSE, JG

    1994-01-01

    A new laser Doppler blood flowmeter for measuring skin perfusion is presented. The flowmeter consists of a probe that uses two different wavelengths and is able to measure at different depths. It may be used to distinguish the superficial microcirculation of the skin providing nutritional flow and t

  3. Maritime target and sea clutter measurements with a coherent Doppler polarimetric surveillance radar

    NARCIS (Netherlands)

    Smith, A.J.E.; Gelsema, S.J.; Kester, L.J.H.M.; Melief, H.W.; Premel Cabic, G.; Theil, A.; Woudenberg, E.

    2002-01-01

    Doppler polarimetry in a surveillance radar for the maritime surface picture is considered. This radar must be able to detect low-RCS targets in littoral environments. Measurements on such targets have been conducted with a coherent polarimetric measurement radar in March 2001 and preliminary result

  4. Design of Ultrasonic System for Vibration Measurement Based on Doppler Effect%基于多普勒效应的超声波测振系统设计

    Institute of Scientific and Technical Information of China (English)

    周继惠; 陈刚; 曹青松; 犹堃

    2015-01-01

    连续超声波束遇到振动物体表面会产生多普勒效应,文中据此设计了超声波测振系统,其主要由超声波发射接收模块、数据采集和信号处理模块等组成。发射探头发出超声波后,接收探头获得由振动物体表面反射的超声波信号,通过数据采集卡转换为数字信号,再采用微分鉴相方法获取原振动信号,实现物体的振动测量。最后,对该超声波测振系统进行了实验,结果证实了该超声波测振系统的有效性。%The ultrasonic system was designed for vibration measurement Doppler effect occurring when continuous ultrasonic beam encountered the surface of vibrating object.The system was composed of ultrasonic transmitting and receiving module and sig-nal acquisition,processing and analysis module.The ultrasound was transmitted by the ultrasonic transmitting probe.The ultrasonic signal reflected from the surface was received by the ultrasonic receiving probe and the reflected ultrasonic signal was converted to the digital signal through the data acquisition card.Then the digital signal was processed through differential phase demodulation to obtain the original vibration signal.Finally,the ultrasonic system for vibration measurement was tested,and the validity of the system was confirmed.

  5. On the Doppler effect for photons in rotating systems

    CERN Document Server

    Giuliani, Giuseppe

    2015-01-01

    The analysis of the Doppler effect for photons in rotating systems, studied using the M\\"ossbauer effect, confirms the general conclusions of a previous paper dedicated to experiments with photons emitted/absorbed by atoms/nuclei in inertial flight. The wave theory of light is so deeply rooted that it has been--and currently is--applied to describe phenomena in which the fundamental entities at work are discrete (photons). The fact that the wave theory of light can describe one aspect of these phenomena can not overshadow two issues: the corpuscular theory of light, firstly applied to the Doppler effect for photons by Schr\\"odinger in 1922, is by far more complete since it describes all the features of the studied phenomena; the wave theory can be used only when the number of photons at work is statistically significant. The disregard of basic methodological criteria may appear as a minor fault. However, the historical development of quantum physics shows that the predominance of the wave theory of radiation,...

  6. Theoretical description of improving measurement accuracy for incoherence Mie Doppler wind lidar

    Institute of Scientific and Technical Information of China (English)

    Du Jun; Ren De-Ming; Zhao Wei-Jiang; Qu Yan-Chen; Chen Zhen-Lei; Geng Li-Jie

    2013-01-01

    For the nonlinearity of Fabry-Perot interferometer (FPI) transmission spectrum,the measurement uncertainty of incoherent Mie Doppler wind lidar based on it increases evidently with the increase of backscattering signal Doppler shift.A method of repeating the use of the approximate linear part of FPI transmission spectra for reducing the high uncertainty of a big Doppler shift is proposed.One of the ways of realizing this method is discussed in detail,in which the characteristics of FPI transmission spectrum changing with thickness and incident angle are utilized simultaneously.Under different atmosphere conditions,it has been proved theoretically that the range of measurement uncertainty drops to one-sixth while its minimum has no serious change.This method can be used not only to guide the new system design,but also as a new working way for the fabricated system.

  7. Micro-Doppler measurement of insect wing-beat frequencies with W-band coherent radar.

    Science.gov (United States)

    Wang, Rui; Hu, Cheng; Fu, Xiaowei; Long, Teng; Zeng, Tao

    2017-05-03

    The wingbeat frequency of insect migrant is regarded potentially valuable for species identification and has long drawn widespread attention in radar entomology. Principally, the radar echo signal can be used to extract wingbeat information, because both the signal amplitude and phase could be modulated by wing-beating. With respect to existing entomological radars, signal amplitude modulation has been used for wingbeat frequency measurement of large insects for many years, but the wingbeat frequency measurement of small insects remains a challenge. In our research, W-band and S-band coherent radars are used to measure the insect wingbeat frequency. The results show that the wingbeat-induced amplitude modulation of W-band radar is more intense than that of the S-band radar and the W-band radar could measure the wingbeat frequency of smaller insects. In addition, it is validated for the first time that the signal phase could also be used to measure the insect wingbeat frequency based on micro-Doppler effect. However, whether the wingbeat frequency measurement is based on the amplitude or phase modulation, it is found that the W-band coherent radar has better performance on both the measurement precision and the measurable minimum size of the insect.

  8. Doppler broadening thermometry of acetylene and accurate measurement of the Boltzmann constant.

    Science.gov (United States)

    Hashemi, R; Povey, C; Derksen, M; Naseri, H; Garber, J; Predoi-Cross, A

    2014-12-07

    In this paper, we present accurate measurements of the fundamental Boltzmann constant based on a line-shape analysis of acetylene spectra in the ν1 + ν3 band recorded using a tunable diode laser. Experimental spectra recorded at low pressures (0.25 - 9 Torr), have been analyzed using a Speed Dependent Voigt model that takes into account the molecular speed dependence effects. This line-shape model reproduces the experimental data with good accuracy and allows us to determine precise line-shape parameters for the P(25) transition of the ν1 + ν3 band. From the recorded spectra we obtained the Doppler-width and then determined the Boltzmann constant, k(B).

  9. Positron life time and annihilation Doppler broadening measurements on transition metal complexes

    Energy Technology Data Exchange (ETDEWEB)

    Levay, B. (Eoetvoes Lorand Tudomanyegyetem, Budapest (Hungary). Fizikai Kemiai es Radiologiai Tanszek); Varhelyi, Cs. (Babes-Bolyai Univ., Cluj (Romania)); Burger, K. (Eoetvoes Lorand Tudomanyegyetem, Budapest (Hungary). Szervetlen es Analitikai Kemiai Intezet)

    1982-01-01

    Positron life time and annihilation Doppler broadening measurements have been carried out on 44 solid coordination compounds. Several correlations have been found between the annihilation life time (tau/sub 1/) and line shape parameters (L) and the chemical structure of the compounds. Halide ligands were the most active towards positrons. This fact supports the assumption on the possible formation of (e/sup +/X/sup -/) positron-halide bound state. The life time was decreasing and the annihilation energy spectra were broadening with the increasing negative character of the halides. The aromatic base ligands affected the positron-halide interaction according to their basicity and space requirement and thus they indirectly affected the annihilation parameters, too. In the planar and tetrahedral complexes the electron density on the central met--al ion affected directly the annihilation parameters, while in the octahedral mixed complexes it had only an ind--irect effect through the polarization of the halide ligands.

  10. Investigation of measurement sensitivities in cross-correlation Doppler global velocimetry

    Science.gov (United States)

    Cadel, Daniel R.; Lowe, K. Todd

    2016-11-01

    Cross-correlation Doppler global velocimetry (CC-DGV) is a flow measurement technique based on the estimation of Doppler frequency shift of scattered light by means of cross-correlating two filtered intensity signals. The signal characteristics of CC-DGV result in fundamental limits for estimation variance as well as the possibility for estimator bias. The current study assesses these aspects theoretically and via Monte Carlo signal simulations. A signal model is developed using canonical numerical functions for the iodine absorption cell and incorporating Poisson and Gaussian signal noise models. Along with consideration of the analytical form of the Cramér-Rao lower bound, best practices for system settings are discussed. The CC-DGV signal processing routine is then assessed by a series of Monte Carlo simulations studying the effect of temperature mismatch between flow signal and reference detector cells, velocity magnitude, and discretization error in the frequency modulation. A measurement bias was observed; the magnitude of the bias is a weak function of the cell temperature mismatch, but it is independent of the flow velocity magnitude. The measurement variance was found to approach the Cramér-Rao lower bound for optimized conditions. A cyclical bias error resulting from the discrete nature of the laser frequency sweep is also observed with maximum errors of ± 1.0 % of the laser frequency scan step size, corresponding to peak errors of ± 0.61 m s-1 for typical settings. Overall, the signal estimator is found to perform best for matched cell temperatures, small frequency step size, and high velocity regimes, where the relative bias errors are collectively minimized.

  11. Observing Molecular Spinning via the Rotational Doppler Effect

    CERN Document Server

    Korech, Omer; Gordon, Robert J; Averbukh, Ilya Sh; Prior, Yehiam

    2013-01-01

    When circularly polarized light is scattered from a rotating target, a rotational Doppler shift (RDS) emerges from an exchange of angular momentum between the spinning object and the electromagnetic field. Here, we used coherently spinning molecules to generate a shift of the frequency of a circularly polarized probe propagating through a gaseous sample. We used a linearly polarized laser pulse to align the molecules, followed by a second delayed pulse polarized at 45{\\deg} to achieve unidirectional molecular rotation. The measured RDS is orders of magnitude greater than previously observed by other methods. This experiment provides explicit evidence of unidirectional molecular rotation and paves the way for a new class of measurements in which the rotational direction of molecular reagents may be monitored or actively controlled.

  12. The age-related advancement of arterial disease measured by Doppler ultrasound diastolic flow analysis.

    Science.gov (United States)

    Terenzi, T; Gallagher, D; DeMeersman, R; Beadle, E; Muller, D

    1993-10-01

    To quantify by A-mode Doppler sonography the age-related progression of arterial disease so that age dependent normal values may be established for the screening Doppler peripheral arterial exam. Arterial distensibility was assessed by A-mode Doppler diastolic flow analysis as a measure of atherogenesis. These values will increase the sensitivity and decrease the incidence of false-positive results when the Doppler exam is utilized to differentially diagnosis vascular and sciatic neurogenic claudication. The relationship between age and results from the standard ankle/arm index ultrasound pneumatic cuff examination was also analyzed. A two by three analysis of variance with orthogonal Helmert contrast codes and simple linear regression analysis was utilized for this cross-sectionally designed investigation. The dependent measures of diastolic flow analysis and ankle/arm pressure index were obtained within three nested successively increasing age groups. Chiropractic office. Studied were a total of 90 sedentary nonsmoking subjects, aged 23-79 yr, all of whom had normally accepted levels of serum glucose, cholesterol and blood pressure. Subjects were screened for evidence of aortic coarctation, myocardial infarction, tachyarrhythmia, aortic valve stenosis, mitral prolapse, hypertension, hypercholesterolemia, diabetes and peripheral occlusive arterial disease. Anthropometric measurements and percent body fat were obtained. A predictive oxygen consumption bike ergometer test was performed to obtain aerobic capacity. The commonly utilized standard ankle/arm index ultrasound pneumatic cuff examination and arterial diastolic flow analysis were performed with A-mode Doppler ultrasound on all subjects. These results demonstrate that a significant inverse linear relationship exists between aging and arterial compliance (p < .0001) in our population. Diastolic flow analysis had a greater sensitivity to arterial disease than the standard ankle/arm index ultrasound pneumatic

  13. Assessment of coating layers on the accuracy of displacement measurement in laser Doppler vibrometry

    Science.gov (United States)

    Hasanian, Mostafa; Lissenden, Cliff J.

    2017-02-01

    The Laser Doppler Vibrometer (LDV) is known to be a useful tool for measuring vibration and wave propagation for non-destructive testing (NDT). Although LDV systems have many advantages, most notably that they provide non-contact measurements, they often require surface enhancement such as reflective tape to improve the signal-to-noise ratio. While accurate for low frequencies, measured displacements from tape can be significantly different from the displacement of the substrate once the frequency exceeds a threshold value. In this study, different tapes are mounted on the surface of an aluminum block, and out-of-plane displacements are recorded for frequencies from 1 to 5 MHz. In addition, dynamic finite element modeling is conducted, where the effect of reflective tapes on measured displacements on the surface of the tape is evaluated. Results of the finite element simulations reveal that the effective stiffness and mass of the tape can contribute significantly to errors in data acquisition during experiments. As evident in the results, the discrepancy between the measured displacements at the top and the bottom of the tape is considerable at some frequencies. The wave propagation simulation also provides improved understanding of the experimental results.

  14. Doppler lidar atmospheric wind sensors - A comparative performance evaluation for global measurement applications from earth orbit

    Science.gov (United States)

    Menzies, R. T.

    1986-01-01

    A comparison is made of four prominent Doppler lidar systems, ranging in wavelength from the near UV to the middle IR, which are presently being studied for their potential in an earth-orbiting global tropospheric wind field measurement application. The comparison is restricted to relative photon efficiencies, i.e., the required number of transmitted photons per pulse is calculated for each system for midtropospheric velocity estimate uncertainties ranging from + or - 1 to + or - 4 m/s. The results are converted to laser transmitter pulse energy and power requirements. The analysis indicates that a coherent CO2 Doppler lidar operating at 9.11-micron wavelength is the most efficient.

  15. A Comprehensive Method of Estimating Electric Fields from Vector Magnetic Field and Doppler Measurements

    CERN Document Server

    Kazachenko, Maria D; Welsch, Brian T

    2014-01-01

    Photospheric electric fields, estimated from sequences of vector magnetic field and Doppler measurements, can be used to estimate the flux of magnetic energy (the Poynting flux) into the corona and as time-dependent boundary conditions for dynamic models of the coronal magnetic field. We have modified and extended an existing method to estimate photospheric electric fields that combines a poloidal-toroidal (PTD) decomposition of the evolving magnetic field vector with Doppler and horizontal plasma velocities. Our current, more comprehensive method, which we dub the "{\\bf P}TD-{\\bf D}oppler-{\\bf F}LCT {\\bf I}deal" (PDFI) technique, can now incorporate Doppler velocities from non-normal viewing angles. It uses the \\texttt{FISHPACK} software package to solve several two-dimensional Poisson equations, a faster and more robust approach than our previous implementations. Here, we describe systematic, quantitative tests of the accuracy and robustness of the PDFI technique using synthetic data from anelastic MHD (\\te...

  16. Portal blood flow volume measurement in schistosomal patients: evaluation of Doppler ultrasonography reproducibility

    Energy Technology Data Exchange (ETDEWEB)

    Leao, Alberto Ribeiro de Souza; Santos, Jose Eduardo Mourao; Moulin, Danilo Sales; Shigueoka, David Carlos; D' Ippolito, Giuseppe [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Escola Paulista de Medicina. Dept. de Diagnostico por Imagem]. E-mail: ar.leao@uol.com.br; Colleoni, Ramiro [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Escola Paulista de Medicina. Dept. de Gastroenterologia

    2008-09-15

    Objective: To evaluate the reproducibility of Doppler ultrasonography in the measurement of portal blood flow volume in schistosomal patients. Materials and methods: Prospective, transversal, observational and self-paired study evaluating 21 patients with hepatosplenic schistosomiasis submitted to Doppler ultrasonography performed by three independent observers for measurement of portal blood flow. Pairwise interobserver agreement was calculated by means of the intraclass correlation coefficient, paired t-test and Pearson's correlation coefficient. Results: Interobserver agreement was excellent. Intraclass correlation ranged from 80.6% to 93.0% (IC at 95% [65.3% ; 95.8%]), with the Pearson's correlation coefficient ranging between 81.6% and 92.7% with no statistically significant interobserver difference regarding the mean portal blood flow volume measured by Doppler ultrasonography (p = 0.954 / 0.758 / 0.749). Conclusion: Doppler ultrasonography has demonstrated to be a reliable method for measuring the portal blood flow volume in patients with portal hypertension secondary to schistosomiasis, with a good interobserver agreement. (author)

  17. Continuous measurements of discharge from a horizontal acoustic Doppler current profiler in a tidal river

    NARCIS (Netherlands)

    Hoitink, A.J.F.; Buschman, F.A.; Vermeulen, B.

    2009-01-01

    Acoustic Doppler current profilers (ADCPs) can be mounted horizontally at a river bank, yielding single-depth horizontal array observations of velocity across the river. This paper presents a semideterministic, semistochastic method to obtain continuous measurements of discharge from horizontal ADCP

  18. Laser Doppler anemometry measurements in a circulating fluidized bed of metal particles

    DEFF Research Database (Denmark)

    Ibsen, Claus Hübbe; Solberg, Tron; Hjertager, Bjørn Helge;

    2002-01-01

    Laser Doppler Anemometry (LDA) measurements were performed in a 1/9 scale model of a 12 MW circulating fluidized bed (CFB) boiler. The model was operated according to scaling laws. The 2D-LDA system used was positioned in two different ways to obtain the three velocity components u, v and w...

  19. The influence of probe fiber distance on laser Doppler perfusion monitoring measurements

    NARCIS (Netherlands)

    Morales, F; Graaff, R; Smit, AJ; Gush, R; Rakhorst, G

    2003-01-01

    Laser Doppler perfusion monitoring (LDPM) is a noninvasive technique for monitoring skin microcirculation. The aim of this article was to investigate the influence of fiber separation on clinical LDPM measurements. A dual-channel LDPM system was used in combination with a probe that consists of two

  20. Multistatic Tracking for Continous Active Sonar using Doppler-Bearing Measurements

    Science.gov (United States)

    2013-07-01

    S. Coraluppi, Multistatic active sonar system interoperability, data fusion, and measures of performance, NURC Technical Report NURC -FR-2006-004...of Doppler sensitive and insensitive waveforms, NURC Technical Report SR-427, July 2005. [7] S. Nardone, V. Aidala, Observability Criteria For

  1. Evaluation of single and multiple Doppler lidar techniques to measure complex flow during the XPIA field campaign

    Energy Technology Data Exchange (ETDEWEB)

    Choukulkar, Aditya; Brewer, W. Alan; Sandberg, Scott P.; Weickmann, Ann; Bonin, Timothy A.; Hardesty, R. Michael; Lundquist, Julie K.; Delgado, Ruben; Iungo, G. Valerio; Ashton, Ryan; Debnath, Mithu; Bianco, Laura; Wilczak, James M.; Oncley, Steven; Wolfe, Daniel

    2017-01-01

    Accurate three-dimensional information of wind flow fields can be an important tool in not only visualizing complex flow but also understanding the underlying physical processes and improving flow modeling. However, a thorough analysis of the measurement uncertainties is required to properly interpret results. The XPIA (eXperimental Planetary boundary layer Instrumentation Assessment) field campaign conducted at the Boulder Atmospheric Observatory (BAO) in Erie, CO, from 2 March to 31 May 2015 brought together a large suite of in situ and remote sensing measurement platforms to evaluate complex flow measurement strategies.

    In this paper, measurement uncertainties for different single and multi-Doppler strategies using simple scan geometries (conical, vertical plane and staring) are investigated. The tradeoffs (such as time–space resolution vs. spatial coverage) among the different measurement techniques are evaluated using co-located measurements made near the BAO tower. Sensitivity of the single-/multi-Doppler measurement uncertainties to averaging period are investigated using the sonic anemometers installed on the BAO tower as the standard reference. Finally, the radiometer measurements are used to partition the measurement periods as a function of atmospheric stability to determine their effect on measurement uncertainty.

    It was found that with an increase in spatial coverage and measurement complexity, the uncertainty in the wind measurement also increased. For multi-Doppler techniques, the increase in uncertainty for temporally uncoordinated measurements is possibly due to requiring additional assumptions of stationarity along with horizontal homogeneity and less representative line-of-sight velocity statistics. It was also found that wind speed measurement uncertainty was lower during stable conditions compared to unstable conditions.

  2. Evaluation of single and multiple Doppler lidar techniques to measure complex flow during the XPIA field campaign

    Science.gov (United States)

    Choukulkar, Aditya; Brewer, W. Alan; Sandberg, Scott P.; Weickmann, Ann; Bonin, Timothy A.; Hardesty, R. Michael; Lundquist, Julie K.; Delgado, Ruben; Valerio Iungo, G.; Ashton, Ryan; Debnath, Mithu; Bianco, Laura; Wilczak, James M.; Oncley, Steven; Wolfe, Daniel

    2017-01-01

    Accurate three-dimensional information of wind flow fields can be an important tool in not only visualizing complex flow but also understanding the underlying physical processes and improving flow modeling. However, a thorough analysis of the measurement uncertainties is required to properly interpret results. The XPIA (eXperimental Planetary boundary layer Instrumentation Assessment) field campaign conducted at the Boulder Atmospheric Observatory (BAO) in Erie, CO, from 2 March to 31 May 2015 brought together a large suite of in situ and remote sensing measurement platforms to evaluate complex flow measurement strategies. In this paper, measurement uncertainties for different single and multi-Doppler strategies using simple scan geometries (conical, vertical plane and staring) are investigated. The tradeoffs (such as time-space resolution vs. spatial coverage) among the different measurement techniques are evaluated using co-located measurements made near the BAO tower. Sensitivity of the single-/multi-Doppler measurement uncertainties to averaging period are investigated using the sonic anemometers installed on the BAO tower as the standard reference. Finally, the radiometer measurements are used to partition the measurement periods as a function of atmospheric stability to determine their effect on measurement uncertainty. It was found that with an increase in spatial coverage and measurement complexity, the uncertainty in the wind measurement also increased. For multi-Doppler techniques, the increase in uncertainty for temporally uncoordinated measurements is possibly due to requiring additional assumptions of stationarity along with horizontal homogeneity and less representative line-of-sight velocity statistics. It was also found that wind speed measurement uncertainty was lower during stable conditions compared to unstable conditions.

  3. Projectile Impact Point Prediction Based on Self-Propelled Artillery Dynamics and Doppler Radar Measurements

    Directory of Open Access Journals (Sweden)

    Mostafa Khalil

    2013-01-01

    Full Text Available Any trajectory calculation method has three primary sources of errors, which are model error, parameter error, and initial state error. In this paper, based on initial projectile flight trajectory data measured using Doppler radar system; a new iterative method is developed to estimate the projectile attitude and the corresponding impact point to improve the second shot hit probability. In order to estimate the projectile initial state, the launch dynamics model of practical 155 mm self-propelled artillery is defined, and hence, the vibration characteristics of the self-propelled artillery is obtained using the transfer matrix method of linear multibody system MSTMM. A discrete time transfer matrix DTTM-4DOF is developed using the modified point mass equations of motion to compute the projectile trajectory and set a direct algebraic relation between any two successive radar data. During iterations, adjustments to the repose angle are made until an agreement with acceptable tolerance occurs between the Doppler radar measurements and the estimated values. Simulated Doppler radar measurements are generated using the nonlinear six-degree-of-freedom trajectory model using the resulted initial disturbance. Results demonstrate that the data estimated using the proposed algorithm agrees well with the simulated Doppler radar data obtained numerically using the nonlinear six-degree-of-freedom model.

  4. Analysis of the Uncertainty in Wind Measurements from the Atmospheric Radiation Measurement Doppler Lidar during XPIA: Field Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, Rob [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    In March and April of 2015, the ARM Doppler lidar that was formerly operated at the Tropical Western Pacific site in Darwin, Australia (S/N 0710-08) was deployed to the Boulder Atmospheric Observatory (BAO) for the eXperimental Planetary boundary-layer Instrument Assessment (XPIA) field campaign. The goal of the XPIA field campaign was to investigate methods of using multiple Doppler lidars to obtain high-resolution three-dimensional measurements of winds and turbulence in the atmospheric boundary layer, and to characterize the uncertainties in these measurements. The ARM Doppler lidar was one of many Doppler lidar systems that participated in this study. During XPIA the 300-m tower at the BAO site was instrumented with well-calibrated sonic anemometers at six levels. These sonic anemometers provided highly accurate reference measurements against which the lidars could be compared. Thus, the deployment of the ARM Doppler lidar during XPIA offered a rare opportunity for the ARM program to characterize the uncertainties in their lidar wind measurements. Results of the lidar-tower comparison indicate that the lidar wind speed measurements are essentially unbiased (~1cm s-1), with a random error of approximately 50 cm s-1. Two methods of uncertainty estimation were tested. The first method was found to produce uncertainties that were too low. The second method produced estimates that were more accurate and better indicators of data quality. As of December 2015, the first method is being used by the ARM Doppler lidar wind value-added product (VAP). One outcome of this work will be to update this VAP to use the second method for uncertainty estimation.

  5. CO2 measurements during transcranial Doppler examinations in headache patients

    DEFF Research Database (Denmark)

    Thomsen, L L; Iversen, Helle Klingenberg

    1994-01-01

    -tidal pCO2 with a capnograph. When patients are nauseated and vomit, as in migraine, the mask or mouthpiece connected to the capnograph represents a problem. We therefore evaluated whether a transcutaneous pCO2 electrode was as useful as the capnograph for pCO2 measurements in TCD examinations. We...... conclude that this is not the case, and recommend capnographic end-tidal pCO2 measurements during TCD examinations. However, transcutaneous pCO2 measurements may represent a supplement to spot measurements of end-tidal pCO2 in stable conditions when long-term monitoring is needed, and the mask...

  6. Explanation of the inverse Doppler effect observed in nonlinear transmission lines.

    Science.gov (United States)

    Kozyrev, Alexander B; van der Weide, Daniel W

    2005-05-27

    The theory of the inverse Doppler effect recently observed in magnetic nonlinear transmission lines is developed. We explain the crucial role of the backward spatial harmonic in the occurrence of an inverse Doppler effect and draw analogies of the magnetic nonlinear transmission line to the backward wave oscillator.

  7. Doppler effect of nonlinear waves and superspirals in oscillatory media.

    Science.gov (United States)

    Brusch, Lutz; Torcini, Alessandro; Bär, Markus

    2003-09-01

    Nonlinear waves emitted from a moving source are studied. A meandering spiral in a reaction-diffusion medium provides an example in which waves originate from a source exhibiting a back-and-forth movement in a radial direction. The periodic motion of the source induces a Doppler effect that causes a modulation in wavelength and amplitude of the waves ("superspiral"). Using direct simulations as well as numerical nonlinear analysis within the complex Ginzburg-Landau equation, we show that waves subject to a convective Eckhaus instability can exhibit monotonic growth or decay as well as saturation of these modulations depending on the perturbation frequency. Our findings elucidate recent experimental observations concerning superspirals and their decay to spatiotemporal chaos.

  8. Relativistic Doppler effect: universal spectra and zeptosecond pulses.

    Science.gov (United States)

    Gordienko, S; Pukhov, A; Shorokhov, O; Baeva, T

    2004-09-10

    We report on a numerical observation of the train of zeptosecond pulses produced by the reflection of a relativistically intense femtosecond laser pulse from the oscillating boundary of an overdense plasma because of the Doppler effect. These pulses promise to become unique experimental and technological tools since their length is of the order of the Bohr radius and the intensity is extremely high proportional, variant 10(19) W/cm(2). We present the physical mechanism, analytical theory, and direct particle-in-cell simulations. We show that the harmonic spectrum is universal: the intensity of nth harmonic scales as 1/n(p) for n<4gamma(2), where gamma is the largest gamma factor of the electron fluid boundary, and p=3 and p=5/2 for the broadband and quasimonochromatic laser pulses, respectively.

  9. Lifetimes in neutron-rich Nd isotopes measured by Doppler profile method

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, I.; Lister, C.J.; Morss, L.R. [and others

    1995-08-01

    Lifetimes of the rotational levels in neutron-rich even-even Nd isotopes were deduced from the analysis of the Doppler broadened line shapes. The experiment was performed at Daresbury with the Eurogam array, which at that time consisted of 45 Compton-suppressed Ge detectors and 5 Low-Energy Photon Spectrometers. The source was in the form of a 7-mm pellet which was prepared by mixing 5-mg; {sup 248}Cm and 65-mg KCl and pressing it under high pressure. Events for which three or more detectors fired were used to construct a cubic data array whose axes represented the {gamma}-ray energies and the contents of each channel the number of events with that particular combination of {gamma}-ray energies. From this cubic array, one-dimensional spectra were generated by placing gates on peaks on the other two axes. Gamma-ray spectra of even-even Nd isotopes were obtained by gating on the transitions in the complimentary Kr fragments. The gamma peaks de-exciting states with I {>=} 12 h were found to be broader than the instrumental line width due to the Doppler effect. The line shapes of they-ray peaks were fitted separately with a simple model for the feeding of the states and assuming a rotational band with constant intrinsic quadruple moment and these are shown in Fig. I-27. The quadrupole moments thus determined were found to be in good agreement with the quadrupole moments measured previously for lower spin states. Because of the success of this technique for the Nd isotopes, we intend to apply this technique to the new larger data set collected with the Eurogam II array. The results of this study were published.

  10. On one-way Doppler measurements of space craft and celestial objects

    Science.gov (United States)

    Jochim, E. F. M.

    2010-01-01

    The orbital velocity of a spacecraft and other celestial objects is monitored by observing the Doppler frequency shift of the signals received at the ground station. This is possible one-way in case the transmitted frequency is stable enough. In most spacecraft a calibrated transponder allows two-way Doppler frequency registrations. In general, the factor 2 is expected as the quotient between two- and one-way frequencies. However, this is no longer the case when the motion of the observed object deviates from the orbit as predicted. Frequency differences appear. Porsche (1999) has published a formula to describe these differences based on the assumption of a double projection of the true velocity vector. In the present paper a more sophisticated analysis of the influence of state errors on the track-ing results is deduced. This theory has been tested by the Doppler measurements during flybys of the comet space probe GIOTTO penetrating through the comae of the comets P/Halley and P/Grigg-Skjellerup. One-way Doppler measurements of the low Earth satellites CHAMP and TERRASAR-X show a tendency for the applicability of this approach. Finally, some conse-quences for the observation of other celestial objects are discussed.

  11. Outlier Detection in GNSS Pseudo-Range/Doppler Measurements for Robust Localization.

    Science.gov (United States)

    Zair, Salim; Le Hégarat-Mascle, Sylvie; Seignez, Emmanuel

    2016-04-22

    In urban areas or space-constrained environments with obstacles, vehicle localization using Global Navigation Satellite System (GNSS) data is hindered by Non-Line Of Sight (NLOS) and multipath receptions. These phenomena induce faulty data that disrupt the precise localization of the GNSS receiver. In this study, we detect the outliers among the observations, Pseudo-Range (PR) and/or Doppler measurements, and we evaluate how discarding them improves the localization. We specify a contrario modeling for GNSS raw data to derive an algorithm that partitions the dataset between inliers and outliers. Then, only the inlier data are considered in the localization process performed either through a classical Particle Filter (PF) or a Rao-Blackwellization (RB) approach. Both localization algorithms exclusively use GNSS data, but they differ by the way Doppler measurements are processed. An experiment has been performed with a GPS receiver aboard a vehicle. Results show that the proposed algorithms are able to detect the 'outliers' in the raw data while being robust to non-Gaussian noise and to intermittent satellite blockage. We compare the performance results achieved either estimating only PR outliers or estimating both PR and Doppler outliers. The best localization is achieved using the RB approach coupled with PR-Doppler outlier estimation.

  12. Outlier Detection in GNSS Pseudo-Range/Doppler Measurements for Robust Localization

    Directory of Open Access Journals (Sweden)

    Salim Zair

    2016-04-01

    Full Text Available In urban areas or space-constrained environments with obstacles, vehicle localization using Global Navigation Satellite System (GNSS data is hindered by Non-Line Of Sight (NLOS and multipath receptions. These phenomena induce faulty data that disrupt the precise localization of the GNSS receiver. In this study, we detect the outliers among the observations, Pseudo-Range (PR and/or Doppler measurements, and we evaluate how discarding them improves the localization. We specify a contrario modeling for GNSS raw data to derive an algorithm that partitions the dataset between inliers and outliers. Then, only the inlier data are considered in the localization process performed either through a classical Particle Filter (PF or a Rao-Blackwellization (RB approach. Both localization algorithms exclusively use GNSS data, but they differ by the way Doppler measurements are processed. An experiment has been performed with a GPS receiver aboard a vehicle. Results show that the proposed algorithms are able to detect the ‘outliers’ in the raw data while being robust to non-Gaussian noise and to intermittent satellite blockage. We compare the performance results achieved either estimating only PR outliers or estimating both PR and Doppler outliers. The best localization is achieved using the RB approach coupled with PR-Doppler outlier estimation.

  13. Laser Doppler velocimetry applied to the measurement of local and global wind

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, J.M.; Forrester, P.A. (Royal Signals and Radar Establishment, Malvern (GB))

    1989-01-01

    The analysis of radiation scattered from naturally occurring aerosols carried along by the wind provides a powerful tool for the study of wind structure and enables the air flow to be studied from a single, non-perturbing, measuring station. In this paper, we outline the current status of wind measurement from ground-based, air borne and space platforms. The potential for using Laser Doppler Velocimetry on a range of applications with wind turbine generators is discussed. (author).

  14. Measurement of two-dimensional Doppler wind fields using a field widened Michelson interferometer.

    Science.gov (United States)

    Langille, Jeffery A; Ward, William E; Scott, Alan; Arsenault, Dennis L

    2013-03-10

    An implementation of the field widened Michelson concept has been applied to obtain high resolution two-dimensional (2D) images of low velocity (<50 m/s) Doppler wind fields in the lab. Procedures and techniques have been developed that allow Doppler wind and irradiance measurements to be determined on a bin by bin basis with an accuracy of less than 2.5 m/s from CCD images over the observed field of view. The interferometer scanning mirror position is controlled to subangstrom precision with subnanometer repeatability using the multi-application low-voltage piezoelectric instrument control electronics developed by COM DEV Ltd.; it is the first implementation of this system as a phase stepping Michelson. In this paper the calibration and characterization of the Doppler imaging system is described and the planned implementation of this new technique for imaging 2D wind and irradiance fields using the earth's airglow is introduced. Observations of Doppler winds produced by a rotating wheel are reported and shown to be of sufficient precision for buoyancy wave observations in airglow in the mesopause region of the terrestrial atmosphere.

  15. Observation of a motional Stark effect to determine the second-order Doppler effect.

    Science.gov (United States)

    Hagel, G; Battesti, R; Nez, F; Julien, L; Biraben, F

    2002-11-11

    The high resolution two-photon spectroscopy of hydrogen is often limited by the second-order Doppler effect. To determine this effect, we apply a magnetic field perpendicular to the atomic beam. This field induces a quadratic motional Stark shift proportional, as the second-order Doppler effect, to v(2) (v atomic velocity). For some magnetic field, these two effects are opposite and the total shift due to the atomic velocity is reduced. We present the first observation of this effect for the 1S-3S transition in hydrogen.

  16. Effect of preload alternations on a new Doppler echocardiographic index of combined systolic and diastolic performance

    DEFF Research Database (Denmark)

    Møller, J E; Poulsen, S H; Egstrup, K

    1999-01-01

    The objective of the study was to assess the effect of preload alternations on a nongeometric Doppler index of combined systolic and diastolic myocardial performance (MPI). Doppler echocardiography was performed during Valsalva maneuver, passive leg lifting, and after sublingual administration of...

  17. Analytical and experimental comparisons between the frequency-modulated–frequency-shift measurement and the pulsed-wave–time-shift measurement Doppler systems

    DEFF Research Database (Denmark)

    Wilhjelm, Jens Erik; Pedersen, P. C.

    1996-01-01

    In previous publications, a new echo-ranging Doppler system based on transmission of repetitive coherent frequency modulated (FM) sinusoids in two different implementations was presented. One of these implementations, the Frequency Modulated - frequency shift measurement (FM-fsm) Doppler system...... is in this paper compared with its PW counterpart, the Pulsed Wave - time shift measurement (PW-tsm) Doppler system. When using transmitted PW and FM signals with a Gaussian envelope, the parallelism between the two systems can be stated explicitly, and comparison be made between the main performance indices...... for the two Doppler systems. The performance of the FM and PW Doppler systems is evaluated by means of numerical simulation and measurements of actual flow profiles. The results indicate that the two Doppler systems have very similar levels of performance....

  18. Radar target recognition based on micro-Doppler effect

    Institute of Scientific and Technical Information of China (English)

    DONG Wei-guang; LI Yan-jun

    2008-01-01

    Mechanical vibration of target structures will modulate the phase function of radar backscattering, and will induce thefrequency modulation of returned signals from the target. It generates a side bands of the target body Doppler frequencyshift, which is helpful for target recognition. Based on this.a micro-Doppler atomic storehouse is built for the targetrecognition, and four kinds of common classifiers are used separately to perform the classified recognition. The simulationexperimental results show that this method has high recognition rate above 90%.

  19. Method and system to measure temperature of gases using coherent anti-stokes doppler spectroscopy

    Science.gov (United States)

    Rhodes, Mark

    2013-12-17

    A method of measuring a temperature of a noble gas in a chamber includes providing the noble gas in the chamber. The noble gas is characterized by a pressure and a temperature. The method also includes directing a first laser beam into the chamber and directing a second laser beam into the chamber. The first laser beam is characterized by a first frequency and the second laser beam is characterized by a second frequency. The method further includes converting at least a portion of the first laser beam and the second laser beam into a coherent anti-Stokes beam, measuring a Doppler broadening of the coherent anti-Stokes beam, and computing the temperature using the Doppler broadening.

  20. Quantitative measurement of blood flow dynamics in chorioallantoic membrane of chicken embryo using laser Doppler anemometry

    Science.gov (United States)

    Borozdova, M. A.; Stiukhina, E. S.; Sdobnov, A. A.; Fedosov, I. V.; Postnov, D. E.; Tuchin, V. V.

    2016-04-01

    We report the results on in ovo application of developed Laser Doppler Anemometer (LDA) device. The chorioallantoic membrane (CAM) of 9-13 days chicken embryos was used as a biological model that allows an easy access to both arterial and venous vessels of different size. The key point of our study was to find out how the periodic and aperiodic pulsations of blood flow (which are inevitable in living organism) will affect the LDA functions and measuring capability. Specifically, we (i) developed the technique to extract and refine the pulse rhythm from the signal received from a vessel, and (ii) analyzed the changes in power spectra of LDA signal that are caused by heart beating and considerably complicate the reliable measurement of Doppler shift. Our main conclusion is that the algorithm of LDA data processing need to be improved, and this possibly can be done by counting the information on current phase of cardiac cycle.

  1. Comparing Pulsed Doppler LIDAR with SODAR and Direct Measurements for Wind Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, N. D.; Jonkman, B. J.; Scott, G. N.; Pichugina, Y. L.

    2007-07-01

    There is a pressing need for good wind-speed measurements at greater and greater heights to assess the availability of the resource in terms of power production and to identify any frequently occurring atmospheric structural characteristics that may create turbulence that impacts the operational reliability and lifetime of wind turbines and their components. In this paper, we summarize the results of a short study that compares the relative accuracies of wind speeds derived from a high-resolution pulsed Doppler LIDAR operated by the National Oceanic and Atmospheric Administration (NOAA) and a midrange Doppler SODAR with wind speeds measured by four levels of tower-based sonic anemometry up to a height of 116 m.

  2. Signal Processing for Radar with Array Antennas and for Radar with Micro-Doppler Measurements

    OpenAIRE

    Björklund, Svante

    2017-01-01

    Radar (RAdio Detection And Ranging) uses radio waves to detect the presence of a target and measure its position and other properties. This sensor has found many civilian and military applications due to advantages such as possible large surveillance areas and operation day and night and in all weather. The contributions of this thesis are within applied signal processing for radar in two somewhat separate research areas: 1) radar with array antennas and 2) radar with micro-Doppler measuremen...

  3. Skin blood flow changes, measured by laser Doppler flowmetry, in the first week after birth

    NARCIS (Netherlands)

    Suichies, H.E.; Brouwer, C.; Aarnoudse, J.G.; Jentink, H.W.; de Mul, F.F.M.; Greve, Jan

    1990-01-01

    Changes in forehead skin blood flow were determined in 17 healthy, term newborns, using a fiberless diode laser Doppler flow meter (Diodopp). Measurements were carried out three times on each infant, at postnatal ages of 16.8 ± 7.4 h, 58.9 ± 6.2 h and 121.5 ± 14.2 h (mean ± S.D.), respectively. Skin

  4. Orbital angular momentum complex spectrum analyzer for vortex light based on rotational Doppler Effect

    CERN Document Server

    Zhou, Hailong; Dong, Jianji; Zhang, Pei; Chen, Dongxu; Cai, Xinlun; Li, Fuli; Zhang, Xinliang

    2016-01-01

    The function to measure orbital angular momentum (OAM) distribution of vortex light is essential for OAM applications. Although there are lots of works to measure OAM modes, it is difficult to measure the power distribution of different OAM modes quantitatively and instantaneously, let alone measure the phase distribution among them. In this work, we demonstrate an OAM complex spectrum analyzer, which enables to measure the power and phase distribution of OAM modes simultaneously by employing rotational Doppler Effect. The original OAM mode distribution is mapped to electrical spectrum of beating signals with a photodetector. The power distribution and phase distribution of superimposed OAM beams are successfully retrieved by analyzing the electrical spectrum. We also extend the measurement to other spatial modes, such as linear polarization modes. These results represent a new landmark of spatial mode analysis and show great potentials in optical communication and OAM quantum state tomography.

  5. Wind gust measurements using pulsed Doppler wind-lidar: comparison of direct and indirect techniques

    DEFF Research Database (Denmark)

    model, driven by the Doppler lidar measurements, which uses a non-linear particle filter to estimate the small-scale turbulent fluctuations. The first results show that the reconstruction method can reproduce the wind speed maxima measured by the sonic anemometer if a low-pass filter with a cut......-off frequency similar to the lidar measurement frequency is applied to the sonic data. These results from the reconstructed wind are better than the maxima derived directly from the wind lidar measurements. However, the maxima of the raw sonic anemometer signal are still higher than the maxima...

  6. Characterization of Turbulence in Wind Turbine Wakes under Different Stability Conditions from Static Doppler LiDAR Measurements

    Directory of Open Access Journals (Sweden)

    Valerie-Marie Kumer

    2017-03-01

    Full Text Available Wake characteristics are of great importance for wind park performance and turbine loads. While wind tunnel experiments provided a solid base for the basic understanding of the structure and dynamics of wind turbine wakes, the consequent step forward to characterize wakes is full-scale measurements in real atmospheric boundary layer conditions under different stability regimes. Scanning Doppler LiDAR measurements have proven to be a flexible and useful tool for such measurements. However, their advantage of measuring spatial fluctuation is accompanied by the limited temporal resolution of individual sampling volumes within the scanned area. This study presents results from LiDAR Doppler Beam Swing (DBS measurements and highlights the potential of information retrieved from a spectral analysis of wake measurements. Data originate from three Windcube v1 and sonic anemometers, collected during the Wind Turbine Wake Experiment–Wieringermeer. Despite the ongoing research on the reliability of turbulence retrievals based on DBS data, our results show wake peak frequencies consistent with sonic anemometer measurements. The energy spectra show rather distinct maxima during stable conditions, which broaden during unstable and neutral conditions. Investigations on the effect of blade pitch on downstream wind speed and turbulence intensity profiles indicate the potential for the development of stability-dependent wind farm control strategies.

  7. Two-wave photon Doppler velocimetry measurements in direct impact Hopkinson pressure bar experiments

    Science.gov (United States)

    Lea, Lewis J.; Jardine, Andrew P.

    2015-09-01

    Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion and faster achievement of force equilibrium. Currently advantages are gained at a significant cost: the fact that input bar data is unavailable removes all information about the striker impacted specimen face, preventing the determination of force equilibrium, and requiring approximations to be made on the sample deformation history. Recently photon Doppler velocimetry methods have been developed, which can replace strain gauges on Hopkinson bars. In this paper we discuss an experimental method and complementary data analysis for using Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system, with the same level of convenience. We discuss extracting velocity and force measurements, and improving the accuracy and convenience of Doppler velocimetry on Hopkinson bars. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains.

  8. Fine-measuring technique and application for sea surface wind by mobile Doppler wind lidar

    Science.gov (United States)

    Liu, Zhishen; Wang, Zhangjun; Wu, Songhua; Liu, Bingyi; Li, Zhigang; Zhang, Xin; Bi, Decang; Chen, Yubao; Li, Rongzhong; Yang, Yuqiang

    2009-06-01

    The Key Laboratory of Ocean Remote Sensing of the Ministry of Education of China, Ocean University of China, has developed the first mobile Doppler wind lidar in China. As an important component of meteorological services for the Good Luck Beijing 2007 Qingdao International Regatta, the mobile Doppler wind lidar was used to measure the sea surface wind (SSW) with 100 m*100 m spatial and 10-min temporal resolution in Qingdao from 15 to 23 August 2007. We present the results from two aspects of this campaign. First, the lidar was operated in the fixed-direction mode and compared to SSW simultaneously measured by a collocated buoy. Second, we present lidar wind measurements throughout the regatta and show good agreement with the match situation of the International Regatta. In addition, we present a case study, accounting for the observation of sailboats stopped by the headwind. With considerable data accumulated, we have shown that the mobile Doppler wind lidar can indeed provide near real-time SSW in support of the sailing games. The lidar has also provided meteorological services for the 2008 Olympic sailing games from 8 to 22 August and Paralympics Sailing Games from 8 to 13 September 2008 in Qingdao.

  9. Two-wave photon Doppler velocimetry measurements in direct impact Hopkinson pressure bar experiments

    Directory of Open Access Journals (Sweden)

    Lea Lewis J.

    2015-01-01

    Full Text Available Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion and faster achievement of force equilibrium. Currently advantages are gained at a significant cost: the fact that input bar data is unavailable removes all information about the striker impacted specimen face, preventing the determination of force equilibrium, and requiring approximations to be made on the sample deformation history. Recently photon Doppler velocimetry methods have been developed, which can replace strain gauges on Hopkinson bars. In this paper we discuss an experimental method and complementary data analysis for using Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system, with the same level of convenience. We discuss extracting velocity and force measurements, and improving the accuracy and convenience of Doppler velocimetry on Hopkinson bars. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains.

  10. Stratospheric temperature measurement with scanning Fabry-Perot interferometer for wind retrieval from mobile Rayleigh Doppler lidar.

    Science.gov (United States)

    Xia, Haiyun; Dou, Xiankang; Shangguan, Mingjia; Zhao, Ruocan; Sun, Dongsong; Wang, Chong; Qiu, Jiawei; Shu, Zhifeng; Xue, Xianghui; Han, Yuli; Han, Yan

    2014-09-08

    Temperature detection remains challenging in the low stratosphere, where the Rayleigh integration lidar is perturbed by aerosol contamination and ozone absorption while the rotational Raman lidar is suffered from its low scattering cross section. To correct the impacts of temperature on the Rayleigh Doppler lidar, a high spectral resolution lidar (HSRL) based on cavity scanning Fabry-Perot Interferometer (FPI) is developed. By considering the effect of the laser spectral width, Doppler broadening of the molecular backscatter, divergence of the light beam and mirror defects of the FPI, a well-behaved transmission function is proved to show the principle of HSRL in detail. Analysis of the statistical error of the HSRL is carried out in the data processing. A temperature lidar using both HSRL and Rayleigh integration techniques is incorporated into the Rayleigh Doppler wind lidar. Simultaneous wind and temperature detection is carried out based on the combined system at Delhi (37.371°N, 97.374°E; 2850 m above the sea level) in Qinghai province, China. Lower Stratosphere temperature has been measured using HSRL between 18 and 50 km with temporal resolution of 2000 seconds. The statistical error of the derived temperatures is between 0.2 and 9.2 K. The temperature profile retrieved from the HSRL and wind profile from the Rayleigh Doppler lidar show good agreement with the radiosonde data. Specifically, the max temperature deviation between the HSRL and radiosonde is 4.7 K from 18 km to 36 km, and it is 2.7 K between the HSRL and Rayleigh integration lidar from 27 km to 34 km.

  11. Investigation of three-dimensional vibration measurement by a single scanning laser Doppler vibrometer

    Science.gov (United States)

    Chen, Da-Ming; Zhu, W. D.

    2017-01-01

    A scanning laser Doppler vibrometer (SLDV) has been widely used in non-contact vibration measurement. This paper presents a novel investigation of three-dimensional (3D) vibration measurement by a single SLDV sequentially placed at three different positions, where 3D vibration is defined as three vibration components along axes of a specified measurement coordinate system (MCS), which can give more precise knowledge of structural dynamic characteristics. A geometric model of the SLDV is proposed and a vibrometer coordinate system (VCS) based on the geometric model is defined and fixed on the SLDV. The pose of a SLDV with respect to a MCS is expressed in the form of a translation vector and a direction cosine matrix from the VCS to the MCS, which can be calculated by four or more target points with known coordinates in both the MCS and the VCS. An improved method based on the least squares method and singular value decomposition is proposed to obtain the pose of the SLDV. Compared with an inverse method, the proposed method can yield an orthogonal direction cosine matrix and be applicable to a two-dimensional structure. Effects of the number of target points on the accuracy and stability of the proposed method are investigated. With three direction cosine matrices of three different positions obtained by the proposed method, measured vibration velocities along laser line-of-sight directions can be transformed to vibration components along axes of the MCS. An experiment was conducted to measure 3D vibration of a target point on a beam under sinusoidal excitation by a single SLDV sequentially placed at three different positions. Vibration components along axes of the MCS obtained by the single SLDV were in good agreement with those from a commercial Polytec 3D scanning laser vibrometer PSV-500-3D.

  12. [The effect of Doppler effect on ultraviolet absorption spectrum from difference in temperature (UVASDT)].

    Science.gov (United States)

    Hu, Yao-gai; Zeng, Fan-qing; Li, Wei; Hu, Ji-ming

    2005-06-01

    In this paper, the formation of UV absorption spectrum from difference in temperature (UVASDT) is discussed. Broadening of spectral lines might be one of the reasons for the formation of UVASDT. The effect of temperature on the broadening of spectral lines is analyzed. The Doppler SDT function is deduced, and the SDT of C60 and progesterone can be explained by it. It is indicated that the Doppler effect might be the primary reason for the formation of UVASDT of this kind of substance.

  13. Design and implementation of a smartphone-based portable ultrasound pulsed-wave Doppler device for blood flow measurement.

    Science.gov (United States)

    Huang, Chih-Chung; Lee, Po-Yang; Chen, Pay-Yu; Liu, Ting-Yu

    2012-01-01

    Blood flow measurement using Doppler ultrasound has become a useful tool for diagnosing cardiovascular diseases and as a physiological monitor. Recently, pocket-sized ultrasound scanners have been introduced for portable diagnosis. The present paper reports the implementation of a portable ultrasound pulsed-wave (PW) Doppler flowmeter using a smartphone. A 10-MHz ultrasonic surface transducer was designed for the dynamic monitoring of blood flow velocity. The directional baseband Doppler shift signals were obtained using a portable analog circuit system. After hardware processing, the Doppler signals were fed directly to a smartphone for Doppler spectrogram analysis and display in real time. To the best of our knowledge, this is the first report of the use of this system for medical ultrasound Doppler signal processing. A Couette flow phantom, consisting of two parallel disks with a 2-mm gap, was used to evaluate and calibrate the device. Doppler spectrograms of porcine blood flow were measured using this stand-alone portable device under the pulsatile condition. Subsequently, in vivo portable system verification was performed by measuring the arterial blood flow of a rat and comparing the results with the measurement from a commercial ultrasound duplex scanner. All of the results demonstrated the potential for using a smartphone as a novel embedded system for portable medical ultrasound applications. © 2012 IEEE

  14. Offshore Wind Measurements Using Doppler Aerosol Wind Lidar (DAWN) at NASA Langley Research Center

    Science.gov (United States)

    Beyon, Jeffrey Y.; Koch, Grady J.; Kavaya, Michael J.

    2014-01-01

    The latest flight demonstration of Doppler Aerosol Wind Lidar (DAWN) at NASA Langley Research Center (LaRC) is presented. The goal of the campaign was to demonstrate the improvement of DAWN system since the previous flight campaign in 2012 and the capabilities of DAWN and the latest airborne wind profiling algorithm APOLO (Airborne Wind Profiling Algorithm for Doppler Wind Lidar) developed at LaRC. The comparisons of APOLO and another algorithm are discussed utilizing two and five line-of-sights (LOSs), respectively. Wind parameters from DAWN were compared with ground-based radar measurements for validation purposes. The campaign period was June - July in 2013 and the flight altitude was 8 km in inland toward Charlotte, NC, and offshores in Virginia Beach, VA and Ocean City, MD. The DAWN system was integrated into a UC12B with two operators onboard during the campaign.

  15. [Transfontanellar Doppler ultrasound measurement of cerebral blood velocity before and after surgical treatment of hydrocephalus].

    Science.gov (United States)

    de Assis, M C; Machado, H R

    1999-09-01

    Twenty-seven children with hydrocephalus of different etiologies diagnosed by clinical examination, neurosonography and computerized brain tomography were submitted to transfontanellar US-Doppler evaluation for measurement of blood flow velocity and for the calculation of resistance index (RI) in the anterior and middle cerebral arteries and internal carotids. All children were submitted to evaluation before surgery and on the 1st, 30th and 60th postoperative days. We conclude that neurosonography and US-Doppler technique is useful for determination of hydrocephalus, indication and control of cerebrospinal fluid shunts and monitoring of changes in RI, comparing data obtained immediately before and after surgery and during the late postoperative period. The results obtained when comparing the RI values for the various arteries during the different stages of the study also permitted us to conclude that the anterior cerebral arteries are representative of the maximal alterations that occur in cerebral vascular resistance in pediatric patients with hydrocephalus.

  16. Offshore wind measurements using Doppler aerosol wind lidar (DAWN) at NASA Langley Research Center

    Science.gov (United States)

    Beyon, Jeffrey Y.; Koch, Grady J.; Kavaya, Michael J.

    2014-06-01

    The latest flight demonstration of Doppler Aerosol Wind Lidar (DAWN) at NASA Langley Research Center (LaRC) is presented. The goal of the campaign was to demonstrate the improvement of DAWN system since the previous flight campaign in 2012 and the capabilities of DAWN and the latest airborne wind profiling algorithm APOLO (Airborne Wind Profiling Algorithm for Doppler Wind Lidar) developed at LaRC. The comparisons of APOLO and another algorithm are discussed utilizing two and five line-of-sights (LOSs), respectively. Wind parameters from DAWN were compared with ground-based radar measurements for validation purposes. The campaign period was June - July in 2013 and the flight altitude was 8 km in inland toward Charlotte, NC, and offshores in Virginia Beach, VA and Ocean City, MD. The DAWN system was integrated into a UC12B with two operators onboard during the campaign.

  17. Imaging shear wave propagation for elastic measurement using OCT Doppler variance method

    Science.gov (United States)

    Zhu, Jiang; Miao, Yusi; Qu, Yueqiao; Ma, Teng; Li, Rui; Du, Yongzhao; Huang, Shenghai; Shung, K. Kirk; Zhou, Qifa; Chen, Zhongping

    2016-03-01

    In this study, we have developed an acoustic radiation force orthogonal excitation optical coherence elastography (ARFOE-OCE) method for the visualization of the shear wave and the calculation of the shear modulus based on the OCT Doppler variance method. The vibration perpendicular to the OCT detection direction is induced by the remote acoustic radiation force (ARF) and the shear wave propagating along the OCT beam is visualized by the OCT M-scan. The homogeneous agar phantom and two-layer agar phantom are measured using the ARFOE-OCE system. The results show that the ARFOE-OCE system has the ability to measure the shear modulus beyond the OCT imaging depth. The OCT Doppler variance method, instead of the OCT Doppler phase method, is used for vibration detection without the need of high phase stability and phase wrapping correction. An M-scan instead of the B-scan for the visualization of the shear wave also simplifies the data processing.

  18. Corruption of radio metric Doppler due to solar plasma dynamics: S/X dual-frequency Doppler calibration for these effects

    Science.gov (United States)

    Winn, F. B.; Reinbold, S. R.; Yip, K. W.; Koch, R. E.; Lubeley, A.

    1975-01-01

    Doppler data from Mariner 6, 7, 9, and 10 and Pioneer 10 and 11 were discussed and the rms noise level for various sun-earth-probe angles were shown. The noise levels of both S- and X-band Doppler data for sun-earth-probe angles smaller than 20 deg were observed to be orders of magnitude greater than nominal. Such solar plasma-related Doppler degradation reduced the Mariner 10-Mercury 11 encounter navigation accuracy by nearly a factor of 10. Furthermore, this degradation was shown to be indirectly related to plasma dynamics and not a direct measure of the dynamics.

  19. Measurements of Mesosphere and Lower Thermosphere Winds by the TIMED Doppler Interferometer

    Science.gov (United States)

    Killeen, T. L.; Gablehouse, R. D.; Johnson, R. M.; Wu, Q.; Solomon, S. C.; Gell, D. A.; Niciejewski, R. J.; Skinner, W. R.; Kafkalidis, J. F.; Ortland, D. A.

    2002-12-01

    Since the launch of the NASA Thermosphere-Ionosphere-Mesosphere Energetics and Dynamics (TIMED) satellite in December 2001, the TIMED Doppler Interferometer (TIDI) has been measuring the global wind field in the mesosphere and lower thermosphere. Validation of these data using ground-based and other space-based observations is in progress. Early analyses have focused on wind measurements in the 60 to 110 km altitude region using emissions from the O2 Atmospheric (0-0) band. We will present results showing the variability of tidal oscillations in the middle atmosphere, and new measurements of polar mesopause dynamics.

  20. Neural network analysis of pulp flow speed in low coherence Doppler flowmetry measurement

    Science.gov (United States)

    Hannula, Manne; Alarousu, Erkki; Prykäri, Tuukka; Myllylä, Risto

    2007-03-01

    Low Coherence Doppler Flowmetry (LCDF) measurement produces a signal, which frequency domain characteristics are in connection to the speed of the flow. In this study a LCDF measurement data of pulp flow in a capillary was analyzed with a simple Artificial Neural Network (ANN) method to estimate the flow speed. The accuracy of the method proved to be good, validation of the method resulted in absolute error of 14 +/- 11 percentage units (mean+/-std) in flow speed estimation. The results of the study can be utilized in development of industrial pulp flow speed measurement instruments.

  1. Ultrasound Doppler measurements predict success of treatment with anti-TNF-α drug in patients with rheumatoid arthritis

    DEFF Research Database (Denmark)

    Ellegaard, Karen; Christensen, Robin; Torp-Pedersen, Søren;

    2011-01-01

    To investigate the predictive ability of core outcomes applied in RA trials, including ultrasound (US) Doppler (USD) measurements differentiating patients who remain on anti-TNF-a therapy following 1 year....

  2. Glucagon-like peptide-2 stimulates mucosal microcirculation measured by laser Doppler flowmetry in end-jejunostomy short bowel syndrome patients

    DEFF Research Database (Denmark)

    Høyerup, P; Hellström, P M; Schmidt, P T;

    2013-01-01

    In animal and human studies glucagon-like peptide-2 (GLP-2) has been shown to increase blood flow in the superior mesenteric artery and the portal vein. This study describes the effect of GLP-2 measured directly on the intestinal mucosal blood flow by laser Doppler flowmetry (LDF) in end-jejunost...

  3. Rotational Doppler Effect: A Probe for Molecular Orbitals Anisotropy.

    Science.gov (United States)

    Miao, Quan; Travnikova, Oksana; Gel'mukhanov, Faris; Kimberg, Victor; Sun, Yu-Ping; Thomas, T Darrah; Nicolas, Christophe; Patanen, Minna; Miron, Catalin

    2015-05-01

    The vibrationally resolved X-ray photoelectron spectra of X2Σg+(3σg−1) and B2Σu+(2σu−1) states of N2+ were recorded for different photon energies and orientations of the polarization vector. Clear dependencies of the spectral line widths on the X-ray polarization as well as on the symmetry of the final electronic states are observed. Contrary to the translational Doppler, the rotational Doppler broadening is sensitive to the photoelectron emission anisotropy. On the basis of theoretical modeling, we suggest that the different rotational Doppler broadenings observed for gerade and ungerade final states result from a Young's double-slit interference phenomenon.

  4. Dynamics of speckles with a small number of scattering events: specific features of manifestation of the Doppler effect.

    Science.gov (United States)

    Ulyanov, Sergey S

    2014-04-01

    Spectra of intensity fluctuations of dynamic non-Gaussian speckles formed with a small number of scattering events have been studied theoretically and experimentally. A new type of manifestation of the Doppler effect has been observed. The dependence of frequency position of the Doppler peak and the shape of the Doppler spectrum on the number of scatterers has been analyzed.

  5. Turbulent flow as a cause for underestimating coronary flow reserve measured by Doppler guide wire

    Directory of Open Access Journals (Sweden)

    Richartz Barbara M

    2006-03-01

    Full Text Available Abstract Background Doppler-tipped coronary guide-wires (FW are well-established tools in interventional cardiology to quantitatively analyze coronary blood flow. Doppler wires are used to measure the coronary flow velocity reserve (CFVR. The CFVR remains reduced in some patients despite anatomically successful coronary angioplasty. It was the aim of our study to test the influence of changes in flow profile on the validity of intra-coronary Doppler flow velocity measurements in vitro. It is still unclear whether turbulent flow in coronary arteries is of importance for physiologic studies in vivo. Methods We perfused glass pipes of defined inner diameters (1.5 – 5.5 mm with heparinized blood in a pulsatile flow model. Laminar and turbulent flow profiles were achieved by varying the flow velocity. The average peak velocity (APV was recorded using 0.014 inch FW. Flow velocity measurements were also performed in 75 patients during coronary angiography. Coronary hyperemia was induced by intra-coronary injection of adenosine. The APV maximum was taken for further analysis. The mean luminal diameter of the coronary artery at the region of flow velocity measurement was calculated by quantitative angiography in two orthogonal planes. Results In vitro, the measured APV multiplied with the luminal area revealed a significant correlation to the given perfusion volumes in all diameters under laminar flow conditions (r2 > 0.85. Above a critical Reynolds number of 500 – indicating turbulent flow – the volume calculation derived by FW velocity measurement underestimated the actual rate of perfusion by up to 22.5 % (13 ± 4.6 %. In vivo, the hyperemic APV was measured irrespectively of the inherent deviation towards lower velocities. In 15 of 75 patients (20% the maximum APV exceeded the velocity of the critical Reynolds number determined by the in vitro experiments. Conclusion Doppler guide wires are a valid tool for exact measurement of coronary flow

  6. Solar wind density structure at 1 AU and comparison to Doppler scintillation measurements

    Science.gov (United States)

    Huddleston, D. E.; Woo, R.; Neugebauer, M.

    1996-07-01

    Results of a survey of solar wind density fluctuations in different flow types observed by ISEE-3 at 1 AU are presented and compared with Doppler scintillation measurements. We consider coronal hole, plasma sheet, interstream, CME and sheath interaction region flow types. For the quasi-stationary solar wind, densities (N) and density fluctuation levels (ΔN) are low in coronal hole flow, and high in the plasma sheet containing the heliospheric current sheet (HCS). The highest fluctuation levels are found in the sheath compression regions between CMEs and associated forward shocks. The streamer structure around the HCS broadens and erodes with distance from the Sun, and the broadened Doppler scintillation signature at 1 AU is in good qualitative agreement with ISEE-3 superposed epoch analysis. The observed asymmetry about the HCS is an expected result of solar wind dynamic evolution. A greater contrast between flow types is seen in ΔN levels rather than in N itself. Doppler scintillation responds to ΔN and thus provides a sensitive means of detecting interplanetary disturbances. However, we find that ΔN/N is not constant in the solar wind, and thus enhanced scintillation cannot unambiguously imply enhanced density.

  7. Volumetric vessel reconstruction method for absolute blood flow velocity measurement in Doppler OCT images

    Science.gov (United States)

    Qi, Li; Zhu, Jiang; Hancock, Aneeka M.; Dai, Cuixia; Zhang, Xuping; Frostig, Ron D.; Chen, Zhongping

    2017-02-01

    Doppler optical coherence tomography (DOCT) is considered one of the most promising functional imaging modalities for neuro biology research and has demonstrated the ability to quantify cerebral blood flow velocity at a high accuracy. However, the measurement of total absolute blood flow velocity (BFV) of major cerebral arteries is still a difficult problem since it not only relates to the properties of the laser and the scattering particles, but also relates to the geometry of both directions of the laser beam and the flow. In this paper, focusing on the analysis of cerebral hemodynamics, we presents a method to quantify the total absolute blood flow velocity in middle cerebral artery (MCA) based on volumetric vessel reconstruction from pure DOCT images. A modified region growing segmentation method is first used to localize the MCA on successive DOCT B-scan images. Vessel skeletonization, followed by an averaging gradient angle calculation method, is then carried out to obtain Doppler angles along the entire MCA. Once the Doppler angles are determined, the absolute blood flow velocity of each position on the MCA is easily found. Given a seed point position on the MCA, our approach could achieve automatic quantification of the fully distributed absolute BFV. Based on experiments conducted using a swept-source optical coherence tomography system, our approach could achieve automatic quantification of the fully distributed absolute BFV across different vessel branches in the rodent brain.

  8. Clutter attenuation using the Doppler effect in standoff electromagnetic quantum sensing

    Science.gov (United States)

    Lanzagorta, Marco; Jitrik, Oliverio; Uhlmann, Jeffrey; Venegas, Salvador

    2016-05-01

    In the context of traditional radar systems, the Doppler effect is crucial to detect and track moving targets in the presence of clutter. In the quantum radar context, however, most theoretical performance analyses to date have assumed static targets. In this paper we consider the Doppler effect at the single photon level. In particular, we describe how the Doppler effect produced by clutter and moving targets modifies the quantum distinguishability and the quantum radar error detection probability equations. Furthermore, we show that Doppler-based delayline cancelers can reduce the effects of clutter in the context of quantum radar, but only in the low-brightness regime. Thus, quantum radar may prove to be an important technology if the electronic battlefield requires stealthy tracking and detection of moving targets in the presence of clutter.

  9. Doppler measurements of feto-placental blood stream in pregnant smokers

    Directory of Open Access Journals (Sweden)

    Gordana Bogdanović

    2011-12-01

    Full Text Available Introduction: Doppler analysis of the feto-placental and fetal circulation give dynamic information on the condition of the bloodstream during pregnancy, and early detection of fetal hypoxia. The objectives of the study were: testing whether there is influence of smoking on feto-placental circulation; determining whether there is a link to a number of smoked cigarettes during the day; assessing the benefits of Doppler ultrasonographic screening in detection of fetal hypoxia in pregnant women who smoke during pregnancy.Methods: 300 pregnancies were included in the prospective research. With regard to a number of smoked cigarettes the pregnant women were divided into three groups: I. the first group (moderate smokers consisted of 100 pregnant women who smoked up to 15 cigarettes a day during pregnancy; II. the second group (heavy smokers 100 pregnant women who smoked more than 15 cigarettes a day during pregnancy and III. the third group (control group 100 pregnant women who did not smoke during pregnancy. All pregnant women underwent Doppler measurements of blood circulation (determination of resistance index – RI in the umbilical artery, fetal aorta and middle cerebral artery.Results: The intensity of smoking has influence to circulation because RI in the umbilical artery and fetal aorta is increased and RI is decreased in the middle cerebral artery in pregnant women heavy smokers in comparison to pregnant women moderate smokers.Conclusion: Doppler sonography of the blood vessels could have an important role in detection of hypoxia and monitoring of the condition of the fetus of pregnant women who smoked during pregnancy.

  10. A comprehensive method of estimating electric fields from vector magnetic field and Doppler measurements

    Energy Technology Data Exchange (ETDEWEB)

    Kazachenko, Maria D.; Fisher, George H.; Welsch, Brian T., E-mail: kazachenko@ssl.berkeley.edu [Space Sciences Laboratory, UC Berkeley, CA 94720 (United States)

    2014-11-01

    Photospheric electric fields, estimated from sequences of vector magnetic field and Doppler measurements, can be used to estimate the flux of magnetic energy (the Poynting flux) into the corona and as time-dependent boundary conditions for dynamic models of the coronal magnetic field. We have modified and extended an existing method to estimate photospheric electric fields that combines a poloidal-toroidal decomposition (PTD) of the evolving magnetic field vector with Doppler and horizontal plasma velocities. Our current, more comprehensive method, which we dub the 'PTD-Doppler-FLCT Ideal' (PDFI) technique, can now incorporate Doppler velocities from non-normal viewing angles. It uses the FISHPACK software package to solve several two-dimensional Poisson equations, a faster and more robust approach than our previous implementations. Here, we describe systematic, quantitative tests of the accuracy and robustness of the PDFI technique using synthetic data from anelastic MHD (ANMHD) simulations, which have been used in similar tests in the past. We find that the PDFI method has less than 1% error in the total Poynting flux and a 10% error in the helicity flux rate at a normal viewing angle (θ = 0) and less than 25% and 10% errors, respectively, at large viewing angles (θ < 60°). We compare our results with other inversion methods at zero viewing angle and find that our method's estimates of the fluxes of magnetic energy and helicity are comparable to or more accurate than other methods. We also discuss the limitations of the PDFI method and its uncertainties.

  11. New lifetime measurements in the stable semimagic Sn isotopes using the Doppler-shift attenuation technique

    Science.gov (United States)

    Jungclaus, A.; Walker, J.; Leske, J.; Speidel, K.-H.; Stuchbery, A. E.; East, M.; Boutachkov, P.; Cederkäll, J.; Doornenbal, P.; Egido, J. L.; Ekström, A.; Gerl, J.; Gernhäuser, R.; Goel, N.; Górska, M.; Kojouharov, I.; Maier-Komor, P.; Modamio, V.; Naqvi, F.; Pietralla, N.; Pietri, S.; Prokopowicz, W.; Schaffner, H.; Schwengner, R.; Wollersheim, H.-J.

    2011-09-01

    Precise measurements of lifetimes in the picosecond range of excited states in the stable even-A Sn isotopes 112,114,116,122Sn have been performed using the Doppler shift attenuation technique. For the first excited 2+ states in 112Sn, 114Sn and 116Sn the E2 transition strengths deduced from the measured lifetimes are in disagreement with the previously adopted values. They indicate a shallow minimum at N = 66 in contrast to the maximum at mid-shell predicted by modern shell model calculations.

  12. Coherent Doppler Lidar for Measuring Velocity and Altitude of Space and Arial Vehicles

    Science.gov (United States)

    Amzajerdian, Farzin; Pierrottet, Diego; Hines, Glenn D.; Petway, Larry; Barnes, Bruce W.

    2016-01-01

    A coherent Doppler lidar has been developed to support future NASA missions to planetary bodies. The lidar transmits three laser beams and measures line-of-sight range and velocity along each beam using a frequency modulated continuous wave (FMCW) technique. Accurate altitude and velocity vector data, derived from the line-of-sight measurements, enables the landing vehicle to precisely navigate from several kilometers above the ground to the designated location and execute a gentle touchdown. The same lidar sensor can also benefit terrestrial applications that cannot rely on GPS or require surface-relative altitude and velocity data.

  13. Blood flow measurements during hemodialysis vascular access interventions - Catheter-based thermodilution or Doppler ultrasound?

    DEFF Research Database (Denmark)

    Heerwagen, Søren T; Hansen, Marc A; Schroeder, Torben V

    2012-01-01

    Purpose: To test the clinical performance of catheter-based thermodilution and Doppler ultrasound of the feeding brachial artery for blood flow measurements during hemodialysis vascular access interventions.Methods: Thirty patients with arteriovenous fistulas who underwent 46 interventions had...... by ultrasound dilution was determined within three days of the procedure. The methods were compared using regression analysis and tested for systematic bias. Results: Failure to position the thermodilutional catheter correctly was observed in 8 out of 46 (17%) pre-intervention measurements. Post...

  14. Doppler broadening effect on collision cross section functions - Deconvolution of the thermal averaging

    Science.gov (United States)

    Bernstein, R. B.

    1973-01-01

    The surprising feature of the Doppler problem in threshold determination is the 'amplification effect' of the target's thermal energy spread. The small thermal energy spread of the target molecules results in a large dispersion in relative kinetic energy. The Doppler broadening effect in connection with thermal energy beam experiments is discussed, and a procedure is recommended for the deconvolution of molecular scattering cross-section functions whose dominant dependence upon relative velocity is approximately that of the standard low-energy form.

  15. Influences of Doppler effect on spontaneously generated coherence in a Rb atom

    Science.gov (United States)

    Song, Zhuo; Zheng, Y.

    2015-11-01

    We study the influences of Doppler effect on spontaneously generated coherence in a Rb atom driven by a probe field and two control fields. We show that the propagating directions of the lasers and the wave-vector mismatch have influence on the absorption properties of the atom. By employing the Doppler effect and spontaneous generated coherence, the ultra-narrow lines in probe absorption profile near two-photon resonant position can be obtained.

  16. Laser frequency stabilization using a dispersive line shape induced by Doppler Effect.

    Science.gov (United States)

    Wang, Qing; Qi, Xianghui; Liu, Shuyong; Yu, Jiachen; Chen, Xuzong

    2015-02-01

    We report a simple and robust Doppler-free spectroscopic technique to stabilize a laser frequency to the atomic transition. By employing Doppler Effect on the atomic beam, we obtained a very stable dispersive signal with a high signal-to-noise ratio and no Doppler-background, which served as an error signal to electronically stabilize a laser frequency without modulation. For validating the performance of this technique, we locked a DFB laser to the (133)Cs D2 line and observed an efficient suppression of the frequency noise and a long-term reduction of the frequency drifts in a laboratory environment.

  17. Simultaneous measurement of respiration and cardiac period in preterm infants by laser Doppler vibrometry

    Science.gov (United States)

    Scalise, Lorenzo; Marchionni, Paolo; Ercoli, Ilaria; Tomasini, Enrico Primo

    2012-06-01

    The paper presents an optical non-contact method for simultaneous measurement of the heart beat and respiration period, based on the assessment of the chest wall movements induced by the pumping action of the heart, and by inspiration/expiration acts of the lungs. The measurement method is applied on 40 patients recovered in a Neonatal Intensive Care Unit (NICU), where the operating conditions are often critical and the contact with the patient's skin needs to be minimized. The method proposed is based on optical recording of the movements of chest wall by means of a laser Doppler vibrometer directly pointed onto the left, frontal part of the thoracic surface. Data measured were compared with reference instrumentation; to reach this goal, the ECG and Laser Doppler Vibrometer (LDV) signals were simultaneously acquired to monitor the heart period (HP), while to measure respiration period (RP) signals from a spirometer and a LDV were collected simultaneously. After LDV signals decomposition, heart and respiration acts were detected and compared in term of beat per minute (bpm). HPs measured by the proposed method showed an uncertainty <6% (respect to ECG), while for RPs data an uncertainty of 3% (respect to spirometer data) was estimated. The proposed method has the intrinsic advantage to be totally without contact and to allow the simultaneous measurement of heart and respiration rate also in critical, clinical environments such as the NICU.

  18. A range-rate extraction unit for determining Doppler effect

    Science.gov (United States)

    1970-01-01

    Active ranging technique devised for VHF or S-band radar systems divides target Doppler frequency by counter-generated number that is proportional to transmitting frequency, thus producing target velocity data in terms of speed and distance relative to target transponder.

  19. LH and ICRH RF electric field measurements using Doppler-free Saturation Spectroscopy

    Science.gov (United States)

    Martin, E. H.; Zafar, A.; Caughman, J. B. O.; Isler, R. C.; Bell, G. L.

    2016-10-01

    The physics mechanisms of wave heating and current drive processes in the bulk hot plasma are generally well identified, however, details of the wave-plasma interaction in the cold plasma edge are still not fully understood. To investigate the alluding physics non-perturbative diagnostics are required due to the large energy flux traversing the space associated with the corresponding RF antenna/launcher. A spectroscopic diagnostic, based on Doppler-free saturation spectroscopy, is currently under development at ORNL that will be capable of measuring RF electric fields with high precision (20 V/cm). The RF electric field is determined by systematically fitting a Balmer series spectral line profile obtained via DFSS using a previous validated non-perturbative quantum mechanically model. The spectral line profile is measured using Doppler-free saturation spectroscopy (DFSS). DFSS is a laser-based technique involving two counter-propagating beams, referred to as the pump and probe, which are made to overlap at a single point in space. The frequency of the laser is swept over that associated with the electronic transition of interest and the probe beam absorption intensity is measured. In this presentation an active spectroscopic technique allowing for measurements of the RF electric field driving wave-plasma interactions for lower hybrid (LH) and ion cyclotron resonance heating (ICRH) systems, based on DFSS, will be discussed. Initial measurements of the electric field in the magnetized capacitively coupled RF sheath obtained on a laboratory test stand will be presented.

  20. CMB Aberration and Doppler Effects as a Source of Hemispherical Asymmetries

    CERN Document Server

    Notari, Alessio; Catena, Riccardo

    2013-01-01

    Our peculiar motion with respect to the CMB rest frame represents a preferred direction in the observed CMB sky since it induces an apparent deflection of the observed CMB photons (aberration) and a shift in their frequency (Doppler). Both effects distort the multipoles a_{ell m}'s at all ell's. Such effects are real as it has been recently measured for the first time by Planck according to what was proposed in recent papers. However, the common lore when estimating a power spectrum from CMB is to consider that Doppler affects only the ell=1 multipole, neglecting any other corrections. In this letter we use simulations of the CMB sky in a boosted frame with a peculiar velocity \\beta = v/c = 0.00123 in order to assess the impact of such effect on power spectrum estimations in different regions of the sky. We show that the boost induces a north-south asymmetry in the power spectrum which is highly significant and non-negligible, of about (0.75 \\pm 0.15)% for half-sky cuts when going up to ell = 2500. We suggest...

  1. Reduction of Doppler effect for the needs of wayside condition monitoring system of railway vehicles

    Science.gov (United States)

    Dybała, Jacek; Radkowski, Stanisław

    2013-07-01

    Technology of acoustic condition monitoring of vehicles in motion is based on the assumption that diagnostically relevant information is stored in the acoustic signal generated by a passing vehicle. Analyzing the possibilities of increasing the effectiveness of condition monitoring of a passing vehicle with stationary microphones, it should be noted that the acoustic signal recorded in these conditions is disturbed with the disturbance resulting from the Doppler effect. Reduction of signal's frequential structure disturbance resulting from the Doppler effect allows efficient analysis of changes in frequential structure of recorded signals and as a result extraction of relevant diagnostic information related with technical condition of running gear of vehicle. This article presents a method for removal of signal's frequential structure disturbances related with relative move of vehicles and stationary monitoring station. For elimination of the frequential non-stationary of signals disturbance-oriented dynamic signal resampling method was used. The paper provides a test of two methods for defining the time course of local disturbance of signal's frequential structure: the method based on the Hilbert transform and the method of analytical description of signal's disturbance based on the knowledge of a phenomenon that causes frequential non-stationarity of signals. As an example, the results of the processing and analysis of acoustic signals recorded by wayside measuring station, during the passage of WM-15A railway vehicle on an experimental track of Polish Railway Institute, are presented.

  2. Study on simulation and experiment of laser micro-Doppler effect for detecting complex vibration

    Science.gov (United States)

    Yuan, Shuai; Zhang, Juan; Liu, Mei-juan; Zhang, Jun

    2013-08-01

    The spectrum of radar signal will be modulated by moving target or vibration and turning part of the target, this is called micro-Doppler effect. It is a new way of using micro-Doppler effect to realize the feature extraction and target recognition. Because the complex vibration target has more complicated frequency component than the single frequency target, so it is very useful to do the research of simulation and experiment of laser micro-Doppler effect for detecting complex vibration. In this paper, the research on simulation and experiment of laser micro-Doppler effect for detecting complex vibration of moving target was developed based on the simulation research of micro-Doppler effect in lidar. Firstly, the geometry of complex vibrating target detection in radar was established. Secondly, the simulation and experiment signal sources were compared and also the returned signals in radar of the simulation and experiment were compared, the compared results showed that the two complex signal sources were very similar, and the frequency change trend of returned signals in radar was the same. Thirdly, joint time-frequency analysis method of the reassigned smoothed pseudo Wigner-Ville distribution (RSPWVD) was introduced to analyze the signals. The results showed that in RSPWVD, the waveform of the vibration target, the target vibration period, the Doppler frequency shift and the target's speed can be got. The simulation results and the experiment results got by the RSPWVD had the basically same frequency characteristics. So the RSPWVD can reflect very well the micro-Doppler characteristics of moving target's complex vibration. In conclusion it proved the validity of the simulated model, also it proved that using this time-frequency method to analyze the micro-Doppler signal of complex vibration was correct. And it laid the foundation of further using lidar to realize the classification and identification of target.

  3. Cost-effectiveness of laser Doppler imaging in burn care in the Netherlands

    Directory of Open Access Journals (Sweden)

    Hop M Jenda

    2013-02-01

    Full Text Available Abstract Background Early accurate assessment of burn depth is important to determine the optimal treatment of burns. The method most used to determine burn depth is clinical assessment, which is the least expensive, but not the most accurate. Laser Doppler imaging (LDI is a technique with which a more accurate (>95% estimate of burn depth can be made by measuring the dermal perfusion. The actual effect on therapeutic decisions, clinical outcomes and the costs of the introduction of this device, however, are unknown. Before we decide to implement LDI in Dutch burn care, a study on the effectiveness and cost-effectiveness of LDI is necessary. Methods/design A multicenter randomised controlled trial will be conducted in the Dutch burn centres: Beverwijk, Groningen and Rotterdam. All patients treated as outpatient or admitted to a burn centre within 5 days post burn, with burns of indeterminate depth (burns not obviously superficial or full thickness and a total body surface area burned of ≤ 20% are eligible. A total of 200 patients will be included. Burn depth will be diagnosed by both clinical assessment and laser Doppler imaging between 2–5 days post burn in all patients. Subsequently, patients are randomly divided in two groups: ‘new diagnostic strategy’ versus ‘current diagnostic strategy’. The results of the LDI-scan will only be provided to the treating clinician in the ‘new diagnostic strategy’ group. The main endpoint is the effect of LDI on wound healing time. In addition we measure: a the effect of LDI on other patient outcomes (quality of life, scar quality, b the effect of LDI on diagnostic and therapeutic decisions, and c the effect of LDI on total (medical and non-medical costs and cost-effectiveness. Discussion This trial will contribute to our current knowledge on the use of LDI in burn care and will provide evidence on its cost-effectiveness. Trial registration NCT01489540

  4. Development of ultrasonic pulse-train Doppler method for velocity profile and flowrate measurement

    Science.gov (United States)

    Wada, Sanehiro; Furuichi, Noriyuki; Shimada, Takashi

    2016-11-01

    We present a novel technique for measuring the velocity profile and flowrate in a pipe. This method, named the ultrasonic pulse-train Doppler method (UPTD), has the advantages of expanding the velocity range and setting the smaller measurement volume with low calculation and instrument costs in comparison with the conventional ultrasonic pulse Doppler method. The conventional method has limited measurement of the velocity range due to the Nyquist sampling theorem. In addition, previous reports indicate that a smaller measurement volume increases the accuracy of the measurement. In consideration of the application of the conventional method to actual flow fields, such as industrial facilities and power plants, the issues of velocity range and measurement volume are important. The UPTD algorithm, which exploits two pulses of ultrasound with a short interval and envelope detection, is proposed. Velocity profiles calculated by this algorithm were examined through simulations and excellent agreement was found in all cases. The influence of the signal-to-noise ratio (SNR) on the algorithm was also estimated. The result indicates that UPTD can measure velocity profiles with high accuracy, even under a small SNR. Experimental measurements were conducted and the results were evaluated at the national standard calibration facility of water flowrate in Japan. Every detected signal forms a set of two pulses and the enveloped line can be observed clearly. The results show that UPTD can measure the velocity profiles over the pipe diameter, even if the velocities exceed the measurable velocity range. The measured flowrates were under 0.6% and the standard deviations for all flowrate conditions were within  ±0.38%, which is the uncertainty of the flowrate measurement estimated in the previous report. In conclusion, UPTD provides superior accuracy and expansion of the velocity range.

  5. Effects of solar eclipse on the ionosphere observed by the Doppler sounding

    Science.gov (United States)

    Sindelarova, Tereza; Mosna, Zbysek; Chum, Jaroslav

    2017-04-01

    The Doppler sounding of the ionosphere is based on measurements of the frequency shift between the transmitted and received radio wave of a stable known frequency. The frequency shift is related to changes of the phase path of the radio wave and can be influenced by the vertical motion of the reflecting layer due to gravity waves, by compression and rarefaction of gas at a fixed height owing to infrasound waves or by changes of electron density due to changes of ionization rate e.g. during the solar eclipse or solar flares. We studied effects of total solar eclipses on 20 March 2015 in the Czech Republic and on 9 March 2016 on Taiwan. In both events, the Doppler sounding was located in the area of partial eclipse. Distinct disturbance was observed around the time of the maximum eclipse. We assume that it is related to processes at the site of measurements rather than to waves propagating from the region of total eclipse.

  6. Modification of the Doppler effect due to the helicity-rotation coupling

    Energy Technology Data Exchange (ETDEWEB)

    Mashhoon, Bahram

    2002-12-30

    The helicity-rotation coupling and its current empirical basis are examined. The modification of the Doppler effect due to the coupling of photon spin with the rotation of the observer is considered in detail in connection with its applications in the Doppler tracking of spacecraft. Further implications of this coupling and the possibility of searching for it in the intensity response of a rotating detector are briefly discussed.

  7. Doppler-shift attenuation lifetime measurement of the 36Ar21+ level

    Science.gov (United States)

    Voss, P.; Drake, T. E.; Starosta, K.; Andreoiu, C.; Ashley, R.; Ball, G. C.; Bender, P. C.; Chester, A.; Churchman, R.; Cross, D. S.; Garnsworthy, A. B.; Hackman, G.; Hadinia, B.; Henderson, R.; Jigmeddorj, B.; Ketelhut, S.; Krücken, R.; Laffoley, A. T.; Leach, K. G.; Miller, D.; Orlandi, R.; Pearson, C. J.; Pore, J.; Rajabali, M. M.; Rand, E. T.; Svensson, C. E.; Tardiff, E.; Unsworth, C.; Wang, Z.-M.; Signoracci, A.

    2017-08-01

    At TRIUMF, the TIGRESS Integrated Plunger device and its suite of ancillary detector systems have been implemented for charged-particle tagging and light-ion identification in coincidence with γ -ray spectroscopy for Doppler-shift lifetime studies and low-energy Coulomb excitation measurements. As a test of the device, the lifetime of the first 2+ excited state in 36Ar was measured from the γ -ray line shape of the 21+→0g.s . + transition using the Doppler-shift attenuation technique following Coulomb excitation. The line-shape signatures, vital for precision lifetime measurements, were significantly improved by enhanced reaction-channel selectivity using a complementary approach of kinematic gating and digital rise-time discrimination of recoiling charged particles in a silicon PIN diode array. The lifetime was determined by comparisons between the data and simulated line shapes generated using our TIGRESS Coulomb excitation code as an input to the Lindhard method, which was then extended and included as a class in geant4. The model-independent lifetime result of 490 ±50 fs corresponds to a reduced quadrupole transition strength of B (E 2 ;21+→0g.s . +) =56 ±6 e2fm4 and agrees well with previous intermediate energy Coulomb excitation measurements, thereby resolving reported discrepancies in the 21+ level lifetime in this self-conjugate nucleus.

  8. CO2 laser doppler systems for the measurement of atmospheric winds and turbulence

    Science.gov (United States)

    Huffaker, R. M.

    1975-01-01

    Two CO2 laser doppler systems developed by NASA and some results obtained with them are discussed. A continuous wave, monostatic system for short-range wind measurement is described, and direct comparisons between the data obtained with it and with a cup-anemometer/wind vane system and a hot-wire anemometer show excellent agreement between the systems. Improvements being made in three CW, CO2 laser doppler systems, including a filter bank for optimized signal processing and a versatile scanning system, are noted. A pulsed CO2 system for measuring clear air turbulence is described, and results of test performance on board a Convair 990 are presented. It is noted that while the system was able to measure air speed and turbulence, the range of its transmitter-atmosphere-receiver was lower than predicted, and a difference of about 20 to 30 dB existed between the actual and theoretical turbulence measurements. Factors that may account for this loss are listed.

  9. Three Dimensional Measurements of Boundary Layer Statistics using Scanning Doppler Lidar

    Science.gov (United States)

    Frehlich, R.

    2008-12-01

    Accurate measurements and modeling of the boundary layer is challenging, especially for the stable night time boundary layer, the highly turbulent boundary layer, and the early morning transition to convection. High quality profiles of mean and turbulent statistics of the night time boundary layer are logistically difficult using instrumented towers or instrumented research aircraft. One of the fundamental limits to the accuracy of atmospheric estimates of mean and turbulent quantities is the number of independent samples of the relevant processes. Traditional measurements from towers, sodars, radar profilers, and instrumented aircraft essentially produce a spatial sample of the atmosphere along a line defined by the mean wind (or aircraft trajectory). Advanced three dimensional measurements of the boundary layer provides the highest statistical accuracy which is essential to understand complex rapidly changing processes. The development of eye-safe scanning Doppler lidars and processing algorithms to correct for the spatial filtering by the laser pulse smoothing and the contribution from estimation error have produced profiles of the mean velocity and key turbulence statistics (the energy dissipation rate, velocity variance, and turbulence length scale) for two orthogonal horizontal velocity components. This requires accurate information about the sensing volume of the lidar measurements as well as the statistical properties of the estimation error. The various processing techniques and fundamental assumptions for the analysis of scanning Doppler lidar data will be presented for various atmospheric conditions. Unresolved issues for future work will also be outlined.

  10. Doppler-shift attenuation method lifetime measurements of low-lying states in {sup 111}In

    Energy Technology Data Exchange (ETDEWEB)

    Bucurescu, D.; Cata-Danil, I.; Ilas, G.; Ivascu, M.; Marginean, N.; Stroe, L.; Ur, C.A. [Institute of Atomic Physics, P.O. Box MG-6, Bucharest 76900 (Romania)

    1996-11-01

    The lifetimes of nine low-lying excited states in {sup 111}In have been measured with the Doppler-shift attenuation method in the {sup 111}Cd({ital p},{ital n}{gamma}) reaction. A comparison of experimental quantities with predictions based on the interacting boson-fermion model unravels the states due to the coupling of a {ital g}{sub 9/2} proton hole to the quadrupole vibrations of the core. {copyright} {ital 1996 The American Physical Society.}

  11. The effect of endogenous estrogen on Doppler-estimated right ventricular systolic pressure during exercise.

    Science.gov (United States)

    Wang, Vicki N; Ahmed, Mavra; Ciofani, Amelia; Sasson, Zion; Granton, John T; Mak, Susanna

    2012-10-01

    We evaluated the effect of endogenous estrogen levels on exercise-related changes in right ventricular systolic pressure (RVSP) of healthy, eumenorrheic, sedentary women. Volunteers were studied at two separates phases of the menstrual cycle (LO and HI estrogen phases), exercised on a semi-supine ergometer with escalating workload and monitored continuously by 12-lead ECG and automated blood pressure cuff. At each exercise stage, Doppler echocardiography measurements were obtained and analyzed to determine RVSP. Fourteen subjects (age 24 ± 5) were studied. Exercise duration was significantly higher on the HI estrogen day, but no significant differences in hemodynamic response to exercise were found between the two study days. There were also no significant differences with respect to heart rate (HR) acceleration during early exercise, as well as resting and peak RVSP, HR, blood pressure, and rate pressure product. Doppler-estimated RVSP demonstrated a linear relationship to HR at a ratio of 1 mm Hg (1 mm Hg = 133.3224 Pa) for every 5 bpm (beats per minute) increase in HR. There were no differences in the slope of this relationship between HI and LO estrogen phases of the menstrual cycle. Our findings did not demonstrate any effect of endogenous estrogen levels on the modulation of the pulmonary vascular response to exercise in healthy women.

  12. Dipolar modulation in the size of galaxies: The effect of Doppler magnification

    CERN Document Server

    Bonvin, Camille; Bacon, David; Clarkson, Chris; Maartens, Roy; Moloi, Teboho; Bull, Philip

    2016-01-01

    Objects falling into an overdensity appear larger on its near side and smaller on its far side than other objects at the same redshift. This produces a dipolar pattern of magnification, primarily as a consequence of the Doppler effect. At low redshift this Doppler magnification completely dominates the usual integrated gravitational lensing contribution to the lensing magnification. We show that one can optimally observe this pattern by extracting the dipole in the cross-correlation of number counts and galaxy sizes. This dipole allows us to almost completely remove the contribution from gravitational lensing up to redshift 0.5, and even at high redshift z~1 the dipole picks up the Doppler magnification predominantly. Doppler magnification should be easily detectable in current and upcoming optical and radio surveys; by forecasting for telescopes such as the SKA, we show that this technique is competitive with using peculiar velocities via redshift-space distortions to constrain dark energy. It produces simil...

  13. Fibre Optic Laser Doppler Anemometry, The Potential For Measurements In Man.

    Science.gov (United States)

    Kilpatrick, Walker D.

    1984-10-01

    Fibre optic laser Doppler anemometry (FOLDA) is a useful technique for in vitro studies but has yet to be used successfully for the measurement of intravascular velocity in man. Some reasons for this are: 1. The difficulty of locating the position of the fibre within the vessel. 2. Lack of knowledge of the precise velocity profile across the vessel. 3. The effects of flow perturbation at the tip of the probe. These problems have been assessed using a FOLDA system developed in our laboratory. Three dimensional velocity profiles of blood flowing in arteries with and without stenoses have been plotted at different rates of flow. The results show that the parabolic profile of fully developed laminar flow is flattened in an arterial stenosis and the degree of flattening increases as flow increases. This means the relationship of the flow and velocity is nonlinear. Any use of FOLDA to assess vessel dimension must take this into account. The position of the fibre in the vessel can only be adequately controlled in in-vitro studies. The region of measurement is only 50 μm diameter and must be at the position of the peak velocity to enable quantitative measurement. Thus the technique is useful in humans only when there is a flat velocity profile such as in the coronary sinus. The relationship between coronary sinus flow and FOLDA velocity is linear in experimental animals. The current FOLDA system has a limited range of projection into the blood stream. The velocity is not linearly related to blood flow when the direction of flow is the same as the projected light, probably due to flow perturbation at the fibre tip. This means that a probe introduced into a coronary artey would not measure linear flow however a probe introduced against the flow could be used to assess the severity of peripheral arterial stenoses. To measure flow across a stenoses before and after angioplasty is possible but requires a method of obtaining an average spatial velocity before it is practicable.

  14. Measurements of the Spatial Variability of Mean Wind Profiles Using Multiple Doppler Lidars over Distances less than 1 Km

    Science.gov (United States)

    Banta, R. M.; Choukulkar, A.; Brewer, A.; Lundquist, J. K.; Iungo, V.; Pichugina, Y. L.; Quelet, P. T.; Wolfe, D. E.; Oncley, S.; Sandberg, S.; Weickmann, A. M.; Delgado, R.; McCaffrey, K.

    2015-12-01

    Small differences in wind speed can translate to large differences in wind energy (WE) revenues, so WE decision making requires accurate measurements of wind profiles through the turbine rotor layer of the lower atmosphere. Advances in understanding and modeling of boundary-layer processes, also needed by WE, requires such measurements through an even deeper layer—at least the lowest few hundreds of meters. An important use for such accurate measured wind-profile data is in the initiation and verification of NWP models. This prospect raises several fundamental questions, such as, what does the modeled profile represent, how was the measured profile determined, and what if the profile had been measured from a different site within the grid cell? To address these questions, two experiments were conducted at the Boulder Atmospheric Observatory (BAO) in modestly complex terrain downwind of the mountains. The Lidar Uncertainty Measurement Experiment (LUMEX) in June-July 2014 featured 5 Doppler lidars (2 scanning), and XPIA in April-May 2015, 11 Doppler lidars, including 5 scanning systems. Two broad goals of these projects were to assess differences in scanning and other data acquisition procedures on the measurements, addressed in (Pichugina et al.) at this conference, and to evaluate the effects of varying spatial separations on differences in the measured winds, addressed in the present paper. Sonic anemometers every 50 m on the 300-m BAO tower were used as a reference for the wind calculations, as well as another profile location. Lidar scan data indicated terrain-related regions of stronger flow within the scan volume of more than 1 m/s that were at least semi-recurrent. This variability produced significant differences in mean rotor-level winds by 2 identical profiling lidars separated by 500 m. During XPIA, four of the scanning Doppler lidars performed intersecting elevation scans (vertical-slice or "RHI") to create 'virtual towers' at various separation

  15. Laser Doppler flowmetry is valid for measurement of cerebral blood flow autoregulation lower limit in rats

    DEFF Research Database (Denmark)

    Tonnesen, Jan; Pryds, Anders; Larsen, Erik Hviid

    2005-01-01

    Laser Doppler flowmetry (LDF) is a recent technique that is increasingly being used to monitor relative changes in cerebral blood flow whereas the intra-arterial 133xenon injection technique is a well-established method for repeated absolute measurements of cerebral blood flow. The aim of this st...... CO2 challenge. Haemodilution influences the two methods differently causing relative overestimation of blood flow by the laser Doppler technique compared to the 133xenon method....... of this study was to validate LDF for assessment of cerebral autoregulation and CO2 reactivity with the 133xenon injection technique as the gold standard. Simultaneous measurements of cerebral blood flow (CBF) were collected by LDF (CBFLDF) and the 133xenon method (CBFXe) while (1) cerebral autoregulation...... was challenged by controlled systemic haemorrhage, or (2) cerebral blood flow was varied by manipulating the arterial partial pressure of CO2 (Pa,CO2). LDF slightly overestimated CBF under conditions of haemorrhagic shock and haemodilution caused by controlled haemorrhage (paired t test, P

  16. Acoustic resolution photoacoustic Doppler velocity measurements in fluids using time-domain cross-correlation

    Science.gov (United States)

    Brunker, J.; Beard, P.

    2013-03-01

    Blood flow measurements have been demonstrated using the acoustic resolution mode of photoacoustic sensing. This is unlike previous flowmetry methods using the optical resolution mode, which limits the maximum penetration depth to approximately 1mm. Here we describe a pulsed time correlation photoacoustic Doppler technique that is inherently flexible, lending itself to both resolution modes. Doppler time shifts are quantified via cross-correlation of pairs of photoacoustic waveforms generated in moving absorbers using pairs of laser light pulses, and the photoacoustic waves detected using an ultrasound transducer. The acoustic resolution mode is employed by using the transducer focal width, rather than the large illuminated volume, to define the lateral spatial resolution. The use of short laser pulses allows depth-resolved measurements to be obtained with high spatial resolution, offering the prospect of mapping flow within microcirculation. Whilst our previous work has been limited to a non-fluid phantom, we now demonstrate measurements in more realistic blood-mimicking phantoms incorporating fluid suspensions of microspheres flowing along an optically transparent tube. Velocities up to 110 mm/s were measured with accuracies approaching 1% of the known velocities, and resolutions of a few mm/s. The velocity range and resolution are scalable with excitation pulse separation, but the maximum measurable velocity was considerably smaller than the value expected from the detector focal beam width. Measurements were also made for blood flowing at velocities up to 13.5 mm/s. This was for a sample reduced to 5% of the normal haematocrit; increasing the red blood cell concentration limited the maximum measurable velocity so that no results were obtained for concentrations greater than 20% of a physiologically realistic haematocrit. There are several possible causes for this limitation; these include the detector bandwidth and irregularities in the flow pattern. Better

  17. Wind measurements in Saturn's atmosphere with UVES/VLT ground-based Doppler velocimetry

    Science.gov (United States)

    Machado, Pedro; Silva, Miguel; Peralta, Javier; Luz, David; Sánchez-Lavega, Agustin; Hueso, Ricardo

    2016-04-01

    We will present preliminary Doppler wind velocity results of Saturn's zonal flow at cloud level. Our aim is help to constrain the characterization of the equatorial jet at cloud level and the latitudinal variation of the zonal winds, to measure its spatial and temporal variability, to contribute to monitor the variability in order to achieve a better understanding of the dynamics of Saturn's zonal winds, whose equatorial jet has a complex vertical structure and temporal variability (Sanchez-Lavega et al., Nature, 423, 623, 3003; Garcia-Melendo et al., Geophys. Res. Lett., 37, L22204. 2010). Finally, the complementarity with Cassini, providing an independent set of observations. The UVES/VLT instrument has been used, which simultaneously achieves high spectral resolving power and high spatial resolution. The field has been derotated in order to have the aperture aligned perpendicularly to Saturn's rotation axis. In this configuration, spatial information in the East-West direction is preserved in a set of spectra in the direction perpendicular to dispersion. The technique of absolute accelerometry (AA, Connes, 1985, ApSS 110, 211) has been applied to the backscattered solar spectrum in order to determine the Doppler shift associated with the zonal circulation. Our measurements have been made in the wavelength range of 480-680 nm. Previously we successfully adapted this Doppler velocimetry technique for measuring winds at Venus cloud tops (Machado et al. 2012). In the present study we will show the adaptation of this method for Saturn's case. Since the AA technique only allows to compare spectra where the line shifts are within the line width, in fast rotating atmospheres (as is the case of Saturn) the spectra must be compared by pairs from adjacent areas of the disk (adjacent pixels in the slit). We will use coordinated observations from the Cassini's Visible and Infrared Mapping Spectrometer (VIMS), in order to compare with the Doppler winds obtained from the UVES

  18. Navigation Doppler Lidar Sensor for Precision Altitude and Vector Velocity Measurements Flight Test Results

    Science.gov (United States)

    Pierrottet, Diego F.; Lockhard, George; Amzajerdian, Farzin; Petway, Larry B.; Barnes, Bruce; Hines, Glenn D.

    2011-01-01

    An all fiber Navigation Doppler Lidar (NDL) system is under development at NASA Langley Research Center (LaRC) for precision descent and landing applications on planetary bodies. The sensor produces high resolution line of sight range, altitude above ground, ground relative attitude, and high precision velocity vector measurements. Previous helicopter flight test results demonstrated the NDL measurement concepts, including measurement precision, accuracies, and operational range. This paper discusses the results obtained from a recent campaign to test the improved sensor hardware, and various signal processing algorithms applicable to real-time processing. The NDL was mounted in an instrumentation pod aboard an Erickson Air-Crane helicopter and flown over vegetation free terrain. The sensor was one of several sensors tested in this field test by NASA?s Autonomous Landing and Hazard Avoidance Technology (ALHAT) project.

  19. Fabrication of {sup 94}Zr thin target for recoil distance doppler shift method of lifetime measurement

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, C.K.; Rohilla, Aman [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Abhilash, S.R.; Kabiraj, D.; Singh, R.P. [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India); Mehta, D. [Department of Physics, Panjab University, Chandigarh 160014 (India); Chamoli, S.K., E-mail: skchamoli@physics.du.ac.in [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India)

    2014-11-11

    A thin isotopic {sup 94}Zr target of thickness 520μg/cm{sup 2} has been prepared for recoil distance Doppler shift method (RDM) lifetime measurement by using an electron beam deposition method on tantalum backing of 3.5 mg/cm{sup 2} thickness at Inter University Accelerator Center (IUAC), New Delhi. To meet the special requirement of smoothness of surface for RDM lifetime measurement and also to protect the outer layer of {sup 94}Zr from peeling off, a very thin layer of gold has been evaporated on a {sup 94}Zr target on a specially designed substrate holder. In all, 143 mg of 99.6% enriched {sup 94}Zr target material was utilized for the fabrication of {sup 94}Zr targets. The target has been successfully used in a recent RDM lifetime measurement experiment at IUAC.

  20. Velocity distribution measurements in a fishway like open channel by Laser Doppler Anemometry (LDA)

    Science.gov (United States)

    Sayeed-Bin-Asad, S. M.; Lundström, T. S.; Andersson, A. G.; Hellström, J. G. I.

    2016-03-01

    Experiments in an open channel flume with placing a vertical half cylinder barrier have been performed in order to investigate how the upstream velocity profiles are affected by a barrier. An experimental technique using Laser Doppler Velocimetry (LDV) was adopted to measure these velocity distributions in the channel for four different discharge rates. Velocity profiles were measured very close to wall and at 25, 50 and 100 mm upstream of the cylinder wall. For comparing these profiles with well-known logarithmic velocity profiles, velocity profiles were also measured in smooth open channel flow for all same four discharge rates. The results indicate that regaining the logarithmic velocity profiles upstream of the half cylindrical barrier occurs at 100 mm upstream of the cylinder wall.

  1. Velocity distribution measurements in a fishway like open channel by Laser Doppler Anemometry (LDA

    Directory of Open Access Journals (Sweden)

    Sayeed-Bin-Asad S.M.

    2016-01-01

    Full Text Available Experiments in an open channel flume with placing a vertical half cylinder barrier have been performed in order to investigate how the upstream velocity profiles are affected by a barrier. An experimental technique using Laser Doppler Velocimetry (LDV was adopted to measure these velocity distributions in the channel for four different discharge rates. Velocity profiles were measured very close to wall and at 25, 50 and 100 mm upstream of the cylinder wall. For comparing these profiles with well-known logarithmic velocity profiles, velocity profiles were also measured in smooth open channel flow for all same four discharge rates. The results indicate that regaining the logarithmic velocity profiles upstream of the half cylindrical barrier occurs at 100 mm upstream of the cylinder wall.

  2. Real-time ultrafast dynamics of dense, hot matter measured by pump-probe Doppler spectrometry

    Science.gov (United States)

    Lad, Amit D.; Mondal, S.; Narayanan, V.; Ahmed, Saima; Rajeev, P. P.; Robinson, A. P. L.; Pasley, J.; Kumar, G. Ravindra

    2010-08-01

    A detailed understanding of the critical surface motion of high intensity laser produced plasma is very crucial for understanding the interaction. We employ the two colour pump-probe technique to report the first ever femtosecond scale ultrafast dynamics measurement of the critical surface of a solid plasma produced by a relativistically intense, femtosecond pump laser beam (1018 W/cm2, 30 fs, 800 nm) on an aluminium target. We observe the Doppler shift of a time delayed probe laser beam (1012 W/cm2, 80 fs, 400 nm) up to delays of 30 ps. Such unravelling of dynamics has not been possible in earlier measurements, which typically used the self reflection of a powerful pump pulse. We observe time dependent red and blue shifts and measure their magnitudes to infer plasma expansion velocity and acceleration and thereby the plasma profile. Our results are very well reproduced by 1D hydrodynamic simulation (HYADES code).

  3. Doppler Tomography

    CERN Document Server

    Marsh, T R

    2000-01-01

    I review the method of Doppler tomography which translates binary-star line profiles taken at a series of orbital phases into a distribution of emission over the binary. I begin with a discussion of the basic principles behind Doppler tomography, including a comparison of the relative merits of maximum entropy regularisation versus filtered back-projection for implementing the inversion. Following this I discuss the issue of noise in Doppler images and possible methods for coping with it. Then I move on to look at the results of Doppler Tomography applied to cataclysmic variable stars. Outstanding successes to date are the discovery of two-arm spiral shocks in cataclysmic variable accretion discs and the probing of the stream/magnetospheric interaction in magnetic cataclysmic variable stars. Doppler tomography has also told us much about the stream/disc interaction in non-magnetic systems and the irradiation of the secondary star in all systems. The latter indirectly reveals such effects as shadowing by the a...

  4. Synchrosqueezing an effective method for analyzing Doppler radar physiological signals.

    Science.gov (United States)

    Yavari, Ehsan; Rahman, Ashikur; Jia Xu; Mandic, Danilo P; Boric-Lubecke, Olga

    2016-08-01

    Doppler radar can monitor vital sign wirelessly. Respiratory and heart rate have time-varying behavior. Capturing the rate variability provides crucial physiological information. However, the common time-frequency methods fail to detect key information. We investigate Synchrosqueezing method to extract oscillatory components of the signal with time varying spectrum. Simulation and experimental result shows the potential of the proposed method for analyzing signals with complex time-frequency behavior like physiological signals. Respiration and heart signals and their components are extracted with higher resolution and without any pre-filtering and signal conditioning.

  5. Accurate Measurements of Free Flight Drag Coefficients with Amateur Doppler Radar

    CERN Document Server

    Courtney, Elya; Courtney, Michael

    2016-01-01

    In earlier papers, techniques have been described using optical chronographs to determine free flight drag coefficients with an accuracy of 1-2%, accomplished by measuring near and far velocities of projectiles in flight over a known distance. Until recently, Doppler radar has been prohibitively expensive for many users. This paper reports results of exploring potential applications and accuracy using a recently available, inexpensive (< $600 US) amateur Doppler radar system to determine drag coefficients for projectiles of various sizes (4.4 mm to 9 mm diameter) and speeds (M0.3 to M3.0). In many cases, drag coefficients can be determined with an accuracy of 1% or better if signal-to-noise ratio is sufficient and projectiles vary little between trials. It is also straightforward to design experiments for determining drag over a wide range of velocities. Experimental approaches and limitations are described. Overall, the amateur radar system shows greater accuracy, ease of use, and simplicity compared with...

  6. Assessment of measurement error due to sampling perspective in the space-based Doppler lidar wind profiler

    Science.gov (United States)

    Houston, S. H.; Emmitt, G. D.

    1986-01-01

    A Multipair Algorithm (MPA) has been developed to minimize the contribution of the sampling error in the simulated Doppler lidar wind profiler measurements (due to angular and spatial separation between shots in a shot pair) to the total measurement uncertainty. Idealized wind fields are used as input to the profiling model, and radial wind estimates are passed through the MPA to yield a wind measurement for 300 x 300 sq km areas. The derived divergence fields illustrate the gradient patterns that are particular to the Doppler lidar sampling strategy and perspective.

  7. Noticeable positive Doppler effect on optical bistability in an N-type active Raman gain atomic system

    Institute of Scientific and Technical Information of China (English)

    Chang Zeng-Guang; Niu Yue-Ping; Zhang Jing-Tao; Gong Shang-Qing

    2012-01-01

    We theoretically investigate the Doppler effect on optical bistability in an N type active Raman gain atomic system inside an optical ring cavity.It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region,which has been known as the positive Doppler effect on optical bistability.In addition,we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.

  8. Compact, High Energy 2-micron Coherent Doppler Wind Lidar Development for NASA's Future 3-D Winds Measurement from Space

    Science.gov (United States)

    Singh, Upendra N.; Koch, Grady; Yu, Jirong; Petros, Mulugeta; Beyon, Jeffrey; Kavaya, Michael J.; Trieu, Bo; Chen, Songsheng; Bai, Yingxin; Petzar, paul; Modlin, Edward A.; Barnes, Bruce W.; Demoz, Belay B.

    2010-01-01

    This paper presents an overview of 2-micron laser transmitter development at NASA Langley Research Center for coherent-detection lidar profiling of winds. The novel high-energy, 2-micron, Ho:Tm:LuLiF laser technology developed at NASA Langley was employed to study laser technology currently envisioned by NASA for future global coherent Doppler lidar winds measurement. The 250 mJ, 10 Hz laser was designed as an integral part of a compact lidar transceiver developed for future aircraft flight. Ground-based wind profiles made with this transceiver will be presented. NASA Langley is currently funded to build complete Doppler lidar systems using this transceiver for the DC-8 aircraft in autonomous operation. Recently, LaRC 2-micron coherent Doppler wind lidar system was selected to contribute to the NASA Science Mission Directorate (SMD) Earth Science Division (ESD) hurricane field experiment in 2010 titled Genesis and Rapid Intensification Processes (GRIP). The Doppler lidar system will measure vertical profiles of horizontal vector winds from the DC-8 aircraft using NASA Langley s existing 2-micron, pulsed, coherent detection, Doppler wind lidar system that is ready for DC-8 integration. The measurements will typically extend from the DC-8 to the earth s surface. They will be highly accurate in both wind magnitude and direction. Displays of the data will be provided in real time on the DC-8. The pulsed Doppler wind lidar of NASA Langley Research Center is much more powerful than past Doppler lidars. The operating range, accuracy, range resolution, and time resolution will be unprecedented. We expect the data to play a key role, combined with the other sensors, in improving understanding and predictive algorithms for hurricane strength and track. 1

  9. Utility of Doppler ultrasonography for diagnosing and assessing treatment effects in liver compartment syndrome.

    Science.gov (United States)

    Ando, Yusuke; Ishigami, Masatoshi; Ishizu, Yoji; Kuzuya, Teiji; Honda, Takashi; Hayashi, Kazuhiko; Ishikawa, Tetsuya; Goto, Hidemi; Hirooka, Yoshiki

    2017-06-01

    Liver compartment syndrome is a life-threatening complication of hepatic subcapsular hematoma; diagnosis and assessment of treatment effects are therefore important. We report a rare case of liver compartment syndrome due to spontaneous hepatic subcapsular hematoma without any underlying conditions, in which Doppler ultrasonography (US) proved useful in both diagnosis and assessment of treatment effects. A 32-year-old woman experienced sudden epigastralgia and was diagnosed with hepatic subcapsular hematoma in the right lobe, based on contrast-enhanced computed tomography. Hepatic arteriography showed active hemorrhage and Doppler US showed retrograde flow in the right portal vein. From these findings, we diagnosed hepatic subcapsular hematoma complicated with liver compartment syndrome, and performed embolization of the bleeding point and percutaneous hematoma drainage. After these medical procedures, normalized antegrade flow in the right portal vein was observed on Doppler US. No underlying conditions contributing to hematoma were identified. In this case, Doppler US was useful for both diagnosis and assessment of treatment effects in liver compartment syndrome. When we examine patients with hepatic subcapsular hematoma, Doppler US should be used to diagnose the presence of liver compartment syndrome and assess treatment effects.

  10. Limited Accuracy of Colour Doppler Ultrasound Dynamic Tissue Perfusion Measurement in Diabetic Adults

    Science.gov (United States)

    Stoperka, Felix; Karger, Claudia

    2016-01-01

    Dynamic tissue perfusion measurement (DTPM) is a pre-described and available method in pediatric ultrasound to quantify tissue perfusion in renal Doppler ultrasound by particular video analysis software. This study evaluates DTPM during single and between repeated visits after 6 months, calibrates repeated DTPM within different region of interest (ROI) and compares DTPM with kidney function markers in adult patients with early diabetic nephropathy (n = 17). During repeated measurements, no association of readings at the same patients in the same (n = 3 readings) as well as repeated visit (n = 2 visits) could be retrieved. No association between DTPM, MDRD-GFR, albuminuria, age and duration of diabetes was observed. These negative results are presumably related to inconsistency of DTPM due to non-fixed ROI position as could be shown in calibrating series. Further development of the method should be performed to enable reproducible DTPM readings in adults. PMID:28033403

  11. Hydrodynamic Nuclei Concentration Technique in Cavitation Research and Comparison to Phase-Doppler Measurements

    Science.gov (United States)

    Ebert, Eric; Kröger, Willfried; Damaschke, Nils

    2015-12-01

    Small particles, especially bubbles in the micro-meter range, influence the cavitation of the propellers. The prediction of cavitation inception and water quality measurements are important in cavitation research. The Hydrodynamic Nuclei Concentration (HDNC) technique can be used for reliable bubble concentration measurements in fluid flows. The HDNC technique bases on the analysis of scattered light from the cavitation nuclei in the water. The HDNC technique can distinguish between bubbles and solid particles. The particle type classification is important, because the number concentration of solid particles is often much higher than the nuclei concentration in cavitation tunnels and in seawater. Verification experiments show, that the HDNC technique reaches similar capabilities in number concentration estimation as Phase Doppler (PD) technique in much shorter acquisition time.

  12. Laser-Doppler Velocimetry Measurements Inside a Backward Curved Centrifugal Fan

    Directory of Open Access Journals (Sweden)

    Tong-Miin Liou

    2001-01-01

    Full Text Available Laser-Doppler velocimetry (LDV measurements are presented of relative mean velocity and turbulence intensity components inside the impeller passage of a centrifugal fan with twelve backward curved blades at design, under-design, and over-design flow rates. Additional LDV measurements were also performed at the volute outlet to examine the uniformity of the outlet flow for the three selected flow rates. Complementary flow visualization results in the tongue region are further presented. It is found that the number of characteristic flow regions and the average turbulence level increase with decreasing air flow rate. For the case of under-design flow rate, there are a through-flow region on the suction side, a reverse flow region on the pressure side, and a shear layer region in between. The corresponding average turbulence intensity is as high as 9.1% of blade tip velocity.

  13. Modelling Solar Oscillation Power Spectra: II. Parametric Model of Spectral Lines Observed in Doppler Velocity Measurements

    CERN Document Server

    Vorontsov, Sergei V

    2013-01-01

    We describe a global parametric model for the observed power spectra of solar oscillations of intermediate and low degree. A physically motivated parameterization is used as a substitute for a direct description of mode excitation and damping as these mechanisms remain poorly understood. The model is targeted at the accurate fitting of power spectra coming from Doppler velocity measurements and uses an adaptive response function that accounts for both the vertical and horizontal components of the velocity field on the solar surface and for possible instrumental and observational distortions. The model is continuous in frequency, can easily be adapted to intensity measurements and extends naturally to the analysis of high-frequency pseudo modes (interference peaks at frequencies above the atmospheric acoustic cutoff).

  14. Perfusion assessment in rat spinal cord tissue using photoplethysmography and laser Doppler flux measurements

    Science.gov (United States)

    Phillips, Justin P.; Cibert-Goton, Vincent; Langford, Richard M.; Shortland, Peter J.

    2013-03-01

    Animal models are widely used to investigate the pathological mechanisms of spinal cord injury (SCI), most commonly in rats. It is well known that compromised blood flow caused by mechanical disruption of the vasculature can produce irreversible damage and cell death in hypoperfused tissue regions and spinal cord tissue is particularly susceptible to such damage. A fiberoptic photoplethysmography (PPG) probe and instrumentation system were used to investigate the practical considerations of making measurements from rat spinal cord and to assess its suitability for use in SCI models. Experiments to assess the regional perfusion of exposed spinal cord in anesthetized adult rats using both PPG and laser Doppler flowmetry (LDF) were performed. It was found that signals could be obtained reliably from all subjects, although considerable intersite and intersubject variability was seen in the PPG signal amplitude compared to LDF. We present results from 30 measurements in five subjects, the two methods are compared, and practical application to SCI animal models is discussed.

  15. Sub-Doppler temperature measurements of laser-cooled atoms using optical nanofibres

    Science.gov (United States)

    Russell, Laura; Deasy, Kieran; Daly, Mark J.; Morrissey, Michael J.; Chormaic, Síle Nic

    2012-01-01

    We present a method for measuring the average temperature of a cloud of cold 85Rb atoms in a magneto-optical trap using an optical nanofibre. A periodic spatial variation is applied to the magnetic fields generated by the trapping coils and this causes the trap centre to oscillate, which, in turn, causes the cloud of cold atoms to oscillate. The optical nanofibre is used to collect the fluorescence emitted by the cold atoms, and the frequency response between the motion of the centre of the oscillating trap and the cloud of atoms is determined. This allows us to make measurements of cloud temperature both above and below the Doppler limit, thereby paving the way for nanofibres to be integrated with ultracold atoms for hybrid quantum devices.

  16. Estimating mechanical blood trauma in a centrifugal blood pump: laser Doppler anemometer measurements of the mean velocity field.

    Science.gov (United States)

    Pinotti, M; Paone, N

    1996-06-01

    A laser Doppler anemometer (LDA) was used to obtain the mean velocity and the Reynolds stress fields in the inner channels of a well-known centrifugal vaneless pump (Bio-pump). Effects of the excessive flow resistance against which an occlusive pump operates in some surgical situations, such as cardiopulmonary bypass, are illustrated. The velocity vector field obtained from LDA measurements reveals that the constraint-forced vortex provides pumping action in a restricted area in the core of the pump. In such situations, recirculating zones dominate the flow and consequently increase the damage to blood cells and raise the risk of thrombus formation in the device. Reynolds normal and shear stress fields were obtained in the entry flow for the channel formed by two rotating cones to illustrate the effects of flow disturbances on the potential for blood cell damage.

  17. Intrinsic physical properties and Doppler boosting effects in LSI+61303

    CERN Document Server

    Massi, M

    2014-01-01

    Our aim is to show how variable Doppler boosting of an intrinsically variable jet can explain the long-term modulation of 1667 \\pm 8 days observed in the radio emission of LSI+61303. The physical scenario is that of a conical, magnetized plasma jet having a periodical (P1) increase of relativistic particles, Nrel, at a specific orbital phase, as predicted by accretion in the eccentric orbit of LSI+61303. Jet precession (P2) changes the angle, eta, between jet axis and line of sight, thereby inducing variable Doppler boosting. The problem is defined in spherical geometry, and the optical depth through the precessing jet is calculated by taking into account that the plasma is stratified along the jet axis. The synchrotron emission of such a jet was calculated and we fitted the resulting flux density Smodel(t) to the observed flux density obtained during a 6.5-year monitoring of LSI+61303 by the Green Bank radio interferometer. Our physical model for the system LSI+61303 is not only able to reproduce the long-te...

  18. Effects of alpha-trinositol on peripheral circulation in diabetic patients with critical limb ischaemia. A pilot study using laser Doppler fluxmetry, transcutaneous oxygen tension measurements and dynamic capillaroscopy

    DEFF Research Database (Denmark)

    Nilsson, L; Apelqvist, J; Edvinsson, L

    1998-01-01

    the start of the administration. There were no detectable changes in blood pressure or heart rate. Laser Doppler flux increased from 41% to 57.5% and tcPO2 changed from 116 to 91 s in "half time recovery" after occlusion. Capillary blood flow showed an increase in resting velocity from 0.1 to 0.5 mm/s at 24...

  19. Color Doppler measurement of blood flow in the inferior thyroid artery in patients with autoimmune thyroid diseases

    Energy Technology Data Exchange (ETDEWEB)

    Caruso, Giuseppe; Attard, Marco; Caronia, Aurelio; Lagalla, Roberto

    2000-10-01

    Purpose: The aim of the study is to find out whether the measurement of peak systolic velocity in the inferior thyroid artery (ITA) is a valuable parameter to differentiate autoimmune thyroid diseases (hyper-, normo- or hypofunctional) and to evaluate the efficacy of medical treatment. Material and methods: The ITA of 31 patients (eight with Graves' disease, 23 with subclinical hypothyroidism) was examined with color Doppler and pulsed Doppler. The final diagnosis was obtained by citology and by hormonal and antibodies assays. The patients were monitorized by ultrasound for a period of 8 months. Results: In all the patients with Graves' disease the peak systolic velocity was always over 150 cm/s, while in other autoimmune thyroiditis the peak systolic velocity was within the normal range, and never exceeding 65 cm/s. In the first group, the measurement taken in the ITA showed also the efficacy of the pharmacological treatment earlier and more reliably than the color Doppler pattern obtained in the parenchyma. Conclusions: The color Doppler measurement of the ITA seems to be a promising technique with low-cost and easy approach. In our experience, the color Doppler of the ITA could have a clinical role in the differential diagnosis of diffuse thyroid diseases and in the follow-up of the Graves' disease during medical treatment.

  20. Improved Micro Rain Radar snow measurements using Doppler spectra post-processing

    Directory of Open Access Journals (Sweden)

    M. Maahn

    2012-11-01

    Full Text Available The Micro Rain Radar 2 (MRR is a compact Frequency Modulated Continuous Wave (FMCW system that operates at 24 GHz. The MRR is a low-cost, portable radar system that requires minimum supervision in the field. As such, the MRR is a frequently used radar system for conducting precipitation research. Current MRR drawbacks are the lack of a sophisticated post-processing algorithm to improve its sensitivity (currently at +3 dBz, spurious artefacts concerning radar receiver noise and the lack of high quality Doppler radar moments. Here we propose an improved processing method which is especially suited for snow observations and provides reliable values of effective reflectivity, Doppler velocity and spectral width. The proposed method is freely available on the web and features a noise removal based on recognition of the most significant peak. A dynamic dealiasing routine allows observations even if the Nyquist velocity range is exceeded. Collocated observations over 115 days of a MRR and a pulsed 35.2 GHz MIRA35 cloud radar show a very high agreement for the proposed method for snow, if reflectivities are larger than −5 dBz. The overall sensitivity is increased to −14 and −8 dBz, depending on range. The proposed method exploits the full potential of MRR's hardware and substantially enhances the use of Micro Rain Radar for studies of solid precipitation.

  1. Detection on micro-Doppler effect based on 1550 nm laser coherent radar

    Science.gov (United States)

    Jun, Zhang; Yang, Sun; Zenghui, Cao; Tengfei, Sun; Tiantian, Zheng

    2014-01-01

    A laser coherent detection system of 1550 nm wavelength was presented, and experimental research on detecting micro-Doppler effect in a dynamic target was developed. In this paper, the return signal in the time domain is decomposed into a set of components in different wavelet-scales by multi-resolution analysis, and the components are associated with the vibrational motions in a target. The micro-Doppler signatures are extracted by applying the reconstruction (inverse wavelet transform). During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrational signals and estimate the motion parameters successfully. The experimental results indicate that the micro-Doppler information in a moving can be effectively detected, and tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analysis and time-frequency analysis.

  2. DETECTION ON MICRO-DOPPLER EFFECT BASED ON LASER COHERENT RADAR

    Institute of Scientific and Technical Information of China (English)

    Sun Yang; Zhang Jun

    2012-01-01

    A laser coherent detection system of 1550 nm wavelength was presented,and experimental research on detecting micro-Doppler effect in a dynamic target was developed.In the study,the return signal in the time domain is decomposed into a set of components in different wavelet scales by multi-resolution wavelet analysis,and the components are associated with the vibrational motions in a target.Then micro-Doppler signatures are extracted by applying the reconstruction.During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrational signals and estimate the motion parameters successfully.The experimental results indicate that the system can effectively detect micro-Doppler information in a moving target,and the tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analysis and time-frequency analysis.

  3. Seismic Source Directivity from Doppler Effect Analysis, Part I: Theory

    OpenAIRE

    Caldeira, B.; Bezzeghoud, M.; Borges, JF

    2004-01-01

    The directivity effects, a characteristic of finiteness seismic sources, are generated by the rupture in preferential directions. Those effects are manifested through different cadencies in the seismological measures from azimuthally distributed stations. The apparent durations are expressed as (e.g. Aki and Richards, 1980), (1), where L, v, c and ??are, respectively, the fault length, the rupture velocity, the wave velocity and the angle between rupture direction and ray. This time duration ...

  4. Measuring Velocity and Acceleration Using Doppler Shift of a Source with an Example of Jet in SS433

    Indian Academy of Sciences (India)

    Sanjay M. Wagh

    2014-12-01

    We describe here as to how the Doppler shift of a source needs to be used to measure its velocity and acceleration. We also apply this method, as an example here, to spectral lines of the blue-shifted jet in micro-quasar SS433 and discuss the intricacies of these measurements.

  5. Wind Profiling from a New Compact, Pulsed, 2-Micron, Coherent-Detection Doppler Lidar Transceiver during Wind Measurement Intercomparison

    Science.gov (United States)

    Singh, Upendra N.; Koch, Grady J.; Kavaya, Michael J.; Yu, Jirong; Beyon, Jeffrey Y.; Demoz, B.; Veneable, D.

    2009-01-01

    NASA Langley Research Center has a long history of developing 2-micron laser transmitter for wind sensing. With support from NASA Laser Risk Reduction Program (LRRP) and Instrument Incubator Program (IIP), NASA Langley Research Center has developed a state-of-the-art compact lidar transceiver for a pulsed coherent Doppler lidar system for wind measurement. This lidar system was recently deployed at Howard University facility in Beltsville, Maryland, along with other wind lidar systems. Coherent Doppler wind lidar ground-based wind measurements and comparisons with other lidars and other sensors will be presented.

  6. Non-contact measurement of facial surface vibration patterns during singing by scanning laser Doppler vibrometer.

    Science.gov (United States)

    Kitamura, Tatsuya; Ohtani, Keisuke

    2015-01-01

    This paper presents a method of measuring the vibration patterns on facial surfaces by using a scanning laser Doppler vibrometer (LDV). The surfaces of the face, neck, and body vibrate during phonation and, according to Titze (2001), these vibrations occur when aerodynamic energy is efficiently converted into acoustic energy at the glottis. A vocalist's vibration velocity patterns may therefore indicate his or her phonatory status or singing skills. LDVs enable laser-based non-contact measurement of the vibration velocity and displacement of a certain point on a vibrating object, and scanning LDVs permit multipoint measurements. The benefits of scanning LDVs originate from the facts that they do not affect the vibrations of measured objects and that they can rapidly measure the vibration patterns across planes. A case study is presented herein to demonstrate the method of measuring vibration velocity patterns with a scanning LDV. The objective of the experiment was to measure the vibration velocity differences between the modal and falsetto registers while three professional soprano singers sang sustained vowels at four pitch frequencies. The results suggest that there is a possibility that pitch frequency are correlated with vibration velocity. However, further investigations are necessary to clarify the relationships between vibration velocity patterns and phonation status and singing skills.

  7. The Doppler Effect of Light Wave%光波的多普勒效应

    Institute of Scientific and Technical Information of China (English)

    张子珍

    2016-01-01

    光波的多普勒效应属狭义相对论的范畴,本文用几何语言和非几何语言的狭义相对论知识推导了光波的多普勒效应公式,并且将两种方法作了比较分析。%The doppler effect of light belong to the category of special relativity .We derived the formula for light wave doppler effect using geometry and non geometry languages of special relativity ,and made a comparative analysis of two kinds of methods .

  8. [Use of the Doppler effect in pathology and vascular surgery of the lower extremities].

    Science.gov (United States)

    Lévy, J B; Battino, J

    1975-11-01

    A clinical, arteriographic and hemodynamic comparative study, using the Doppler effect in 100 cases, suggests: -- that a study of the Doppler effect is a very useful method of diagnosis to determine the site of obstruction and the state of the blood vessels beyond the obstruction, even in the absence of adequate radiological images; -- following operation, it permits one to assess a case of thrombosis, even when the latter is not obvious clinically. It makes unnecessary post-operative arteriographic controls in tired or high-risk patients.

  9. The effect of nonuniform motion on the Doppler spectrum of scattered continuous-wave waveforms

    Science.gov (United States)

    Gray, John E.; Addison, Stephen R.

    2003-04-01

    The Doppler effect is a widely treated phenomena in both radar and sonar for objects undergoing uniform motion. There are many different models (Censor has written a history of the subject) one can use to derive the Doppler effect. The treatment of non-uniform motion is not widely discussed in the literature of radar and sonar. Some authors argue it is negligible, while others refer to work dating back to Kelly in the early sixties. The treatment by Kelly, based on waveform analysis in acoustics, is difficult to justify in electromagnetism. Using the language of waveform analysis it is difficult to determine when approximations are justified by the physics of the waveform interaction and when they aren't. By returning to electromagnetic considerations in the derivation and subsequent analysis, issues associated with the correct physics and proper approximations become transparent. We present a straight forward analysis of the non-uniform Doppler effect based on the relativistic mirror (moving boundary) that is undergoing arbitrary motion. The resultant structure of the scattered waveform provides a simple representation of the effect of non-uniform motion on the scattered waveform that can be more easily analyzed. This work is a continuation of earlier work done by Censor, De Smedt, and Cooper. This analysis is independent of narrow-band assumptions so it is completely general. Non-uniform motion can produce two types of effects associated with the Doppler spectrum, a baseband line that isn't straight and micro-Doppler off of the baseband that produces complicated sideband behavior. Complicated baseband and micro-Doppler are illustrated by using the example of a particular waveform, the continuous wave (CW) which is analyzed for a number of examples of interest to the radar community. Application of this information is then discussed.

  10. Multi-channel Doppler backscattering measurements in the C-2 field reversed configuration

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, L., E-mail: lschmitz@ucla.edu; Peebles, W. A. [Department of Physics and Astronomy, University of California Los Angeles, Los Angeles, California 90095 (United States); Ruskov, E. [Department of Physics and Astronomy, University of California, Irvine, Irvine, California 92697 (United States); Deng, B. H.; Gota, H.; Gupta, D.; Tuszewski, M.; Douglass, J.; Binderbauer, M.; Tajima, T. [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)

    2014-11-15

    A versatile heterodyne Doppler Backscattering (DBS) system is used to measure density fluctuation levels (in the wavenumber range kρ{sub s} ≤ 50), and the toroidal E × B flow velocity in the C-2 Field-Reversed Configuration (FRC). Six tunable frequencies in three waveguide bands (26 GHz ≤ f ≤ 90 GHz) are launched using monostatic beam optics, via a quasi-optical beam combiner/polarizer and an adjustable parabolic focusing mirror (inside the vacuum enclosure) achieving Gaussian beam spot sizes of 3–5.5 cm at the X/O-mode cutoff. The DBS system covers plasma densities of 0.8 × 10{sup 13} ≤ n{sub e} ≤ 1 × 10{sup 14} cm{sup −3}, and provides access to the FRC core (up to the field null) and across the FRC separatrix into the scrape-off layer plasma.

  11. Comparison of numerical hindcasted severe waves with Doppler radar measurements in the North Sea

    Science.gov (United States)

    Ponce de León, Sonia; Bettencourt, João H.; Dias, Frederic

    2017-01-01

    Severe sea states in the North Sea present a challenge to wave forecasting systems and a threat to offshore installations such as oil and gas platforms and offshore wind farms. Here, we study the ability of a third-generation spectral wave model to reproduce winter sea states in the North Sea. Measured and modeled time series of integral wave parameters and directional wave spectra are compared for a 12-day period in the winter of 2013-2014 when successive severe storms moved across the North Atlantic and the North Sea. Records were obtained from a Doppler radar and wave buoys. The hindcast was performed with the WAVEWATCH III model (Tolman 2014) with high spectral resolution both in frequency and direction. A good general agreement was obtained for integrated parameters, but discrepancies were found to occur in spectral shapes.

  12. APPROACH OF IMPROVING PRECISION IN ULTRASONIC DOPPLER BLOODSTREAM SPEED MEASUREMENT BY CHAOS-BASED FREQUENCY DETECTING

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    It is critical for cerebral vascular disease diagnosis through Doppler to detect the maximum and the minimum of the carotid blood flow speed accurately. A kind of Duffing system under an external periodic power with dump is introduced in the letter, numerical analysis is carried out by four-order Runge-Kutta method. An oscillator array is designed according to the frequency of the ultrasonic wave. When the external signals are inputted, computational algorithm is used to scan the array in turn and analyze the result, and the frequency can be determined. Based on the methods above, detecting the carotid blood flow speed accurately is realized. The Signal-to-Noise Ratio (SNR) of-20.23dB is obtained by the result of experiments. In conclusion, the SNR has been improved and the precision of the measured bloodstream speed has been increased,which can be 0.069% to 0.13%.

  13. Measurement uncertainty analysis in incoherent Doppler lidars by a new scattering approach.

    Science.gov (United States)

    Belmonte, Aniceto; Lázaro, Antonio

    2006-08-21

    We need to examine the uncertainty added to the Doppler measurement process of atmospheric wind speeds of a practical incoherent detection lidar. For this application, the multibeam Fizeau wedge has the advantage over the Fabry-Perot interferometer of defining linear fringe patterns. Unfortunately, the convenience of using the transfer function for angular spectrum transmission has not been available because the nonparallel mirror geometry of Fizeau wedges. In this paper, we extent the spatial-frequency arguments used in Fabry-Perot etalons to the Fizeau geometry by using a generalized scattering matrix method based on the propagation of optical vortices. Our technique opens the door to consider complex, realistic configurations for any Fizeau-based instrument.

  14. Multi-channel Doppler backscattering measurements in the C-2 field reversed configuration.

    Science.gov (United States)

    Schmitz, L; Ruskov, E; Deng, B H; Gota, H; Gupta, D; Tuszewski, M; Douglass, J; Peebles, W A; Binderbauer, M; Tajima, T

    2014-11-01

    A versatile heterodyne Doppler Backscattering (DBS) system is used to measure density fluctuation levels (in the wavenumber range kρs ≤ 50), and the toroidal E × B flow velocity in the C-2 Field-Reversed Configuration (FRC). Six tunable frequencies in three waveguide bands (26 GHz ≤ f ≤ 90 GHz) are launched using monostatic beam optics, via a quasi-optical beam combiner/polarizer and an adjustable parabolic focusing mirror (inside the vacuum enclosure) achieving Gaussian beam spot sizes of 3-5.5 cm at the X/O-mode cutoff. The DBS system covers plasma densities of 0.8 × 10(13) ≤ ne ≤ 1 × 10(14) cm(-3), and provides access to the FRC core (up to the field null) and across the FRC separatrix into the scrape-off layer plasma.

  15. Comparison of shipboard acoustic Doppler current profiler and moored current measurements in the Equatorial Pacific

    Science.gov (United States)

    Chereskin, T. K.; Regier, L. A.; Halpern, D.

    1987-01-01

    Depth-averaged current shears computed from shipboard acoustic Doppler current profiler (ADCP) and moored Savonius rotor and vane vector-averaging current meter (VACM) measurements are compared at 35, 62.5, 100 and 140 m depths within 7 km of each other near 0 deg, 140 deg W during a 12-day interval in November 1984. The agreement between the VACM and ADCP shears was excellent. The average root-mean-square difference of hourly shear values was small, approximately 0.0021/s, and the average correlation coefficient was 0.90. Spectral estimates were equivalent to within a 95 percent significance level and the VACM and ADCP shears were 95 percent statistically coherent with zero phase difference for frequencies below 0.2 cycles per hour.

  16. The measurement of sperm motility by the fibre optic Doppler anemometer as a prediction of bovine fertility

    Science.gov (United States)

    Bullock, J. G.; Ross, D. A.

    The fibre optic Doppler anemometer (FODA) has been used to develop an accurate quantitative method of routinely assessing bull fertility. This method is of importance to the artificial insemination industry because the present qualitative estimation, performed by viewing semen using a microscope, can only set broad limits of quality. Laser light from the FODA was directed into diluted semen samples and the back scattered light was measured. A digital correlator was used to calculate the signal correlation of the back scattered light. The resultant data curves were interpreted in terms of the collective motility and swimming speed of the spermatozoa using a microcomputer. These two parameters are accepted as being indicative of fertility. The accuracy of this method is demonstrated by examination of results obtained in an experiment where enzymes, thought to alter fertility, were added to semen. The effect of the enzymes on the swimming speed and motility was clearly demonstrated.

  17. Fringe mode transmittance laser Doppler microscope anemometer: its adaptation for measurement in the microcirculation.

    Science.gov (United States)

    Einav, S; Berman, H J

    1988-10-01

    Blood flow analysis in the microcirculation requires accurate measurement of velocity, volume flow and shear-rate versus shear-stress relationships. The resolution of most anemometers is too limited to obtain useful measurements, especially near the blood vessel wall and at branches and bifurcations. To make such measurements possible with a noninvasive, high resolution, accurate technique, we have developed a fringe mode, transmittance laser Doppler microscope anemometer (LDMA). This system has an intrinsically high spatial resolution (10 x 12 microns), and does not require a high concentration (10(6)/cm3) of scatters or red blood cells (RBC) as in our application. Preliminary measurements of water flow in a rectangular channel were conducted to ascertain the reliability and accuracy of velocity measurements using the LDMA. Velocity profiles were then measured by the LDMA system in arterioles 38-135 microns in diameter, in the transparent, everted cheek pouch of the anaesthetized hamster. The extremely high resolution of the optical system, and the ultra-fine traversing mechanism of the microscope stage, made velocity readings larger than 0.02 mm/s with accuracy and reproducibility better than 1%, possible near the wall to within 7-10 microns.

  18. Reference measurements on a Francis model turbine with 2D Laser-Doppler-Anemometry

    Science.gov (United States)

    Frey, A.; Kirschner, O.; Riedelbauch, S.; Jester-Zuerker, R.; Jung, A.

    2016-11-01

    To validate the investigations of a high-resolution CFD simulation of a Francis turbine, measurements with 2D Laser-Doppler-Anemometry are carried out. The turbine is operated in part load, where a rotating vortex rope occurs. To validate both, mean velocities and velocity fluctuations, the measurements are classified relative to the vortex rope position. Several acrylic glass windows are installed in the turbine walls such as upstream of the spiral case inlet, in the vaneless space and in the draft tube. The current investigation is focused on a measurement plane below the runner. 2D velocity components are measured on this whole plane by measuring several narrow spaced radial lines. To avoid optical refraction of the laser beam a plan parallel window is inserted in the cone wall. The laser probe is positioned with a 2D traverse system consisting of a circumferential rail and a radial aligned linear traverse. The velocity data are synchronized with the rotational frequency of the rotating vortex rope. The results of one measurement line show the dependency of the axial and circumferential velocities on the vortex rope position.

  19. The effect of diurnal variations of ionospheric parameters on Doppler frequency shift on the Boulder-Havana path

    Science.gov (United States)

    Laso, B.; Potapova, N. I.; Freizon, I. A.; Shapiro, B. S.

    1981-08-01

    An analysis of vertical-sounding and Doppler-shift data at 10 and 15 MHz obtained for the Boulder-Havana path indicates that the influence of critical frequencies is primarily manifested in variations of propagation modes and associated variations of Doppler shift. Variations of layer height are shown to have a considerable effect on the morning peak and to primarily determine the magnitude of Doppler shift during disturbed nighttime periods.

  20. Micro-Doppler Effect of Extended Streamlined Targets Based on Sliding Scattering Centre Model

    Directory of Open Access Journals (Sweden)

    Bo Tang

    2016-06-01

    Full Text Available The scattering center of extended streamlined targets can slide when the direction of radiation is changed. The sliding scattering center has influence on the micro-Doppler effect of micro-motion of the extended streamlined target. This paper focused on the micro-Doppler of the extended streamlined target for the bistatic radar. Based on the analysis, the analytical expressions of the micro-Doppler of coning motion with sliding scattering center model were given for bistatic radar. And the results were validated by the simulated results of the scattering field based on the full-wave method of the electromagnetic computation. The results showed that the sliding of the scattering center can make the micro-Doppler be less and distorted, and the influence of the sliding is different for two different types of the sliding scattering centers: sliding on the surface and sliding on the bottom circle. The analytical expressions of the micro-Doppler are helpful to analyze the time-frequency presentations (TFR of the coning motion of the extended streamlined target and to estimate the parameters of the target.

  1. A comparison of measurements of cerebral blood flow in the rabbit using laser Doppler spectroscopy and radionuclide labelled microspheres.

    Science.gov (United States)

    Eyre, J A; Essex, T J; Flecknell, P A; Bartholomew, P H; Sinclair, J I

    1988-02-01

    Laser Doppler spectroscopy has been evaluated for the measurement of cerebral blood flow (CBF) by correlation with simultaneous measurements by radionuclide labelled microspheres. The experimental procedures were carried out on five anaesthetised rabbits. The cortical tissue was exposed by means of a small burr hole and illuminated by a helium neon laser (632.8 nm). Reflected light was detected using a silicon photodiode, and CBF was calculated continuously from the power of the frequency weighted Doppler spectrum in the reflected light. Three successive measurements of CBF were made using the microsphere technique. Following an initial baseline measurement, CBF was increased by an infusion of metaraminol and then reduced by controlled haemorrhage. Laser Doppler spectroscopy provided continuous monitoring of blood flow fluctuations and during the haemorrhage it was possible to demonstrate CBF autoregulation until the mean blood pressure fell below 6.7 kPa (50 mmHg). A regression analysis was performed between the simultaneous CBF measurements from the two techniques using a least squares best fit straight line analysis (r = 0.92, P less than 0.001). It was concluded that the flow computed from laser Doppler spectroscopy varied linearly with CBF and offers the unique advantage of continuous and instantaneous measurements even during nonsteady state flow.

  2. Development of a mobile Doppler lidar system for wind and temperature measurements at 30-70 km

    Science.gov (United States)

    Yan, Zhaoai; Hu, Xiong; Guo, Wenjie; Guo, Shangyong; Cheng, Yongqiang; Gong, Jiancun; Yue, Jia

    2017-02-01

    A mobile Doppler lidar system has been developed to simultaneously measure zonal and meridional winds and temperature from 30 to 70 km. Each of the two zonal and meridional wind subsystems employs a 15 W power, 532 nm laser and a 1 m diameter telescope. Iodine vapor filters are used to stabilize laser frequency and to detect the Doppler shift of backscattered signal. The integration method is used for temperature measurement. Experiments were carried out using the mobile Doppler lidar in August 2014 at Qinghai, China (91°E, 38°N). The zonal wind was measured from 20 to 70 km at a 3 km spatial resolution and 2 h temporal resolution. The measurement error is about 0.5 m/s at 30 km, and 10 m/s at 70 km. In addition, the temperature was measured from 30 to 70 km at 1 km spatial resolution and 1 h temporal resolution. The temperature measurement error is about 0.4 K at 30 km, and 8.0 K at 70 km. Comparison of the lidar results with the temperature of the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER), the zonal wind of the Modern-Era Retrospective Analysis for Re-search and Applications (MERRA), and radiosonde zonal wind shows good agreement, indicating that the Doppler lidar results are reliable.

  3. Retrieval of Vertical Profiles of Liquid Water and Ice Content in Mixed Clouds from Doppler Radar and Microwave Radiometer Measurements.

    Science.gov (United States)

    Sauvageot, Henri

    1996-01-01

    A new method to retrieve vertical profiles of liquid water content Mw(z), ice water content Mi(z), and ice particle size distribution Ni(D, z), (where D is the ice particle size and z the vertical coordinate) in mixed nonprecipitating clouds using the observations of a zenith-viewing Doppler radar and of a microwave radiometer is proposed. In this method, the profile of the vertical air velocity deduced from Doppler radar measurements is used to describe the rate of production by the updrafts of water. vapor in excess of saturation with respect to ice. Using a Zi Mi power-law relation with an unknown linear parameter (let i, be this parameter) and initially assuming that Zw is negligible with respect to Zi, (where Zw and Zi are the radar reflectivity factors of liquid water and ice particles respectively), the measured radar reflectivity factor profile Zm ( Zi) is inverted to estimate Ni(D, z). From Ni(D, z), the profile of the rate of water vapor that can be consumed by pure deposition on ice particles is calculated. The difference between the rate of production of the exam water vapor and the rate of deposited water vapor is an expression of the rate of liquid water generation at each level. By writing that the integral of the liquid water along the profile has to be equal to the total liquid water deduced from the microwave radiometer measurement, an estimation of the i parameter is obtained. From i, an estimation of the profiles Mw(z), Mi(z), Zw(z), Zi(z) (=Zm Zw), and Ni(D, z) is calculated. If Zw is effectively negligible with respect to Zi, the computation of the retrieved profiles is ended. If not, Zi(z) is corrected and a new estimation of the profiles is computed. The results of the numerical simulation of the algorithm are presented.

  4. Retrieval of aerosol backscatter and extinction from airborne coherent Doppler wind lidar measurements

    Directory of Open Access Journals (Sweden)

    F. Chouza

    2015-02-01

    Full Text Available A novel method for calibration and quantitative aerosol optical properties retrieval from Doppler wind lidars (DWL is presented in this work. Due to the strong wavelength dependence of the atmospheric molecular backscatter and the low sensitivity of the coherent detection to spectrally broad signals, calibration methods for aerosol lidars cannot be applied to a coherent DWLs usually operating at wavelengths between 1.5–2 μm. Instead, concurrent measurements of an airborne DWL at 2 μm and the POLIS ground-based aerosol lidar at 532 nm are used in this work, in combination with sun photometer measurements, for the calibration and retrieval of aerosol backscatter and extinction profiles. The proposed method was applied to measurements from the SALTRACE experiment in June–July 2013, which aimed at quantifying the aerosol transport and change in aerosol properties from the Sahara desert to the Caribbean. The retrieved backscatter and extinction coefficient profiles from the airborne DWL are within 20% of POLIS aerosol lidar and CALIPSO satellite measurements. Thus the proposed method extends the capabilities of coherent DWL to measure profiles of the horizontal and vertical wind towards aerosol backscatter and extinction profiles, which is of high benefit for aerosol transport studies.

  5. Gravity wave observations by Doppler wind and temperature lidar measurements in the strato- and mesosphere

    Science.gov (United States)

    Baumgarten, Gerd; Fiedler, Jens; Hildebrand, Jens; Lübken, Franz-Josef

    2016-04-01

    The observation of wind and temperature perturbations by gravity waves propagating throughout the strato- and mesosphere is a challenging task. Both the kinetic and potential energy density can be derived and yield information about ensemble mean properties of gravity waves. We measure temperatures and winds with the Doppler Rayleigh/Mie/Raman lidar at the ALOMAR research station in Northern Norway (69N, 16E). Using two independently steerable telescopes and lasers we are able to measure vertical profiles of two wind components and temperatures simultaneously. The observations can be performed even under sunlit conditions, which is essential for measuring atmospheric perturbations over several days and during summer at this location. We report on the first observation of persistent inertia gravity wave signatures in the horizontal wind and temperature. The measurements cover the altitude range from 20 km to about 80 km during night and to about 70 km during daytime. For one case with observations lasting more than 50 hours, we find amplitudes of 5 to 25 m/s and 1 to 8 K in wind and temperature, respectively. The measured kinetic to potential energy density ratio is about 10, indicating that the majority of variability is due to waves with intrinsic frequencies close to the inertial frequency. The entire wave field is mainly characterized by the presence of multiple waves, however quasi-monochromatic waves can be identified at limited times and allow a more detailed analysis of wave properties like propagation direction, amplitudes and the momentum flux.

  6. Phonon characteristics of high {Tc} superconductors from neutron Doppler broadening measurements

    Energy Technology Data Exchange (ETDEWEB)

    Trela, W.J.; Kwei, G.H.; Lynn, J.E. [Los Alamos National Lab., NM (United States); Meggers, K. [Univ. of Kiel (Germany)

    1994-12-01

    Statistical information on the phonon frequency spectrum of materials can be measured by neutron transmission techniques if they contain nuclei with low energy resonances, narrow enough to be Doppler-broadened, in their neutron cross sections. The authors have carried out some measurements using this technique for materials of the lanthanum barium cuprate class, La{sub 2{minus}x}Ba{sub x}CuO{sub 4}. Two samples with slightly different concentrations of oxygen, one being superconductive, the other not, were examined. Pure lanthanum cuprate was also measured. Lanthanum, barium and copper all have relatively low energy narrow resonances. Thus it should be possible to detect differences in the phonons carried by different kinds of atom in the lattice. Neutron cross section measurements have been made with high energy resolution and statistical precision on the 59m flight path of LANSCE, the pulsed spallation neutron source at Los Alamos National Laboratory. Measurements on all three materials were made over a range of temperatures from 15K to 300K, with small steps through the critical temperature region near 27K. No significant changes in the mean phonon energy of the lanthanum atoms were observed near the critical temperature of the super-conducting material. It appears however that the mean phonon energy of lanthanum in the superconductor is considerably higher than that in the non-superconductors. The samples used in this series of experiments were too thin in barium and copper to determine anything significant about their phonon spectra.

  7. Validation of streamflow measurements made with M9 and RiverRay acoustic Doppler current profilers

    Science.gov (United States)

    Boldt, Justin A.; Oberg, Kevin A.

    2015-01-01

    The U.S. Geological Survey (USGS) Office of Surface Water (OSW) previously validated the use of Teledyne RD Instruments (TRDI) Rio Grande (in 2007), StreamPro (in 2006), and Broadband (in 1996) acoustic Doppler current profilers (ADCPs) for streamflow (discharge) measurements made by the USGS. Two new ADCPs, the SonTek M9 and the TRDI RiverRay, were first used in the USGS Water Mission Area programs in 2009. Since 2009, the OSW and USGS Water Science Centers (WSCs) have been conducting field measurements as part of their stream-gaging program using these ADCPs. The purpose of this paper is to document the results of USGS OSW analyses for validation of M9 and RiverRay ADCP streamflow measurements. The OSW required each participating WSC to make comparison measurements over the range of operating conditions in which the instruments were used until sufficient measurements were available. The performance of these ADCPs was evaluated for validation and to identify any present and potential problems. Statistical analyses of streamflow measurements indicate that measurements made with the SonTek M9 ADCP using firmware 2.00–3.00 or the TRDI RiverRay ADCP using firmware 44.12–44.15 are unbiased, and therefore, can continue to be used to make streamflow measurements in the USGS stream-gaging program. However, for the M9 ADCP, there are some important issues to be considered in making future measurements. Possible future work may include additional validation of streamflow measurements made with these instruments from other locations in the United States and measurement validation using updated firmware and software.

  8. Enhanced optical precursors by Doppler effect via active Raman gain process.

    Science.gov (United States)

    Peng, Yandong; Niu, Yueping; Zhang, Lida; Yang, Aihong; Jiang, Lin; Gong, Shangqing

    2012-08-15

    A scheme for enhancing precursor pulse by Doppler effect is proposed in a room-temperature active-Raman-gain medium. Due to abnormal dispersion between two gain peaks, main fields are advanced and constructively interfere with optical precursors, which leads to enhancement of the transient pulse at the rise edge of the input. Moreover, after Doppler averaging, the abnormal dispersion intensifies and the constructive interference between precursors and main fields is much strengthened, which boosts the transient spike. Simulation results demonstrate that the peak intensity of precursors could be enhanced nearly 20 times larger than that of the input.

  9. Combined complex Doppler and Cherenkov effect in left-handed metamaterials

    CERN Document Server

    Ziemkiewicz, David

    2015-01-01

    We derive the formula of the complex Doppler shift in a two-dimensional, dispersive metamaterial and we show that a moving, monochromatic radiation source generates multiple frequency modes. The role of the group velocity is stressed and the Doppler shifted radiation field exhibits features of the Cherenkov effect. The presented theory is also applicable to the case of a moving, nonoscillating charge and explains many peculiar characteristics of the Cherenkov radiation in lefthanded metamaterials such as the backward direction of power emission, the constant radiation angle and the lack of velocity threshold.

  10. Potential for stratospheric Doppler windspeed measurements of Jupiter by sub-millimetre spectroscopy

    Science.gov (United States)

    Hurley, J.; Irwin, P. G. J.; Ellison, B. N.; de Kok, R.; Calcutt, S. B.; Teanby, N. A.; Fletcher, L. N.; Irshad, R.

    2010-09-01

    The sub-millimetre/microwave range of the spectrum has been exploited in the field of Earth observation by many instruments over the years and has provided a plethora of information on atmospheric chemistry and dynamics - however, this spectral range has not been fully explored in planetary science, having been exclusively employed to carry out ground-based measurements. To this end, a sub-millimetre instrument, the Orbiter Terahertz Infrared Spectrometer (ORTIS), is studied by the University of Oxford and the Rutherford Appleton Laboratory, to meet the requirements of the European Space Agency's Cosmic Visions 2015-2025 programme - in particular, the Europa Jupiter System Mission (EJSM), which has the European Space Agency and the National Aeronautics and Space Administration as partners. ORTIS is designed to measure atmospheric temperature, the abundance of stratospheric water vapour and other jovian gases, and is intended to be capable of retrieving vertical profiles of horizontal windspeed in the stratosphere for the first time, from Doppler-shifted emission lines measured at high spectral resolution. In this work, a preliminary study and implementation of the estimation of windspeed profiles on simulated spectra representative of Jupiter is presented, detailing the development of the retrieval algorithm, showing that a sub-millimetre instrument such as ORTIS should be able to retrieve windspeed profiles to an accuracy of about 15 m/s between 70 and 200 km/0.1-10 mb using a single near-limb measurement, for expected noise amplitudes.

  11. Detonation wave profiles measured in plastic bonded explosives using 1550 nm photon doppler velocimetry (PDV)

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsen, Richard L [Los Alamos National Laboratory; Bartram, Brian D [Los Alamos National Laboratory; Sanchez, Nathaniel (nate) J [Los Alamos National Laboratory

    2009-01-01

    We present detonation wave profiles measured in two TATB based explosives and two HMX based explosives. Profiles were measured at the interface of the explosive and a Lithium-Fluoride (LiF) window using 1550 nm Photon Doppler Velocimetry (PDV). Planar detonations were produced by impacting the explosive with a projectile launched in a gas-gun. The impact state was varied to produce varied distance to detonation, and therefore varied support of the Taylor wave following the Chapman-Jouget (CJ) or sonic state. Profiles from experiments with different support should be the same between the Von-Neumann (VN) spike and CJ state and different thereafter. Comparison of profiles with differing support, therefore, allows us to estimate reaction zone lengths. For the TATB based explosive, a reaction zone length of {approx} 3.9 mm, 500 ns was measured in EDC-35, and a reaction zone length of {approx} 6.3 mm, 800 ns was measured in PBX 9502 pre-cooled to -55 C. The respective VN spike state was 2.25 {+-} 0.05 km/s in EDC-35 and 2.4 {+-} 0.1 km/s in the cooled PBX 9502. We do not believe we have resolved either the VN spike state (> 2.6 km/s) nor the reaction zone length (<< 50 ns) in the HMX based explosives.

  12. Detonation Wave Profiles Measured in Plastic Bonded Explosives Using 1550 nm Photon Doppler Velocimetry

    Science.gov (United States)

    Gustavsen, R. L.; Bartram, B. D.; Sanchez, N. J.

    2009-12-01

    We present detonation wave profiles measured in two TATB based explosives and two HMX based explosives. Profiles were measured at the interface of the explosive and a Lithium-Fluoride (LiF) window using 1550 nm Photon Doppler Velocimetry (PDV). Planar detonations were produced by impacting the explosive with a projectile launched in a gas-gun. The impact state was changed from shot to shot in order to produce varied distances to detonation. In this way, we tuned the support of the Taylor wave following the Chapman-Jouget (CJ) or sonic state. Profiles from experiments with different support should be the same between the Von-Neumann (VN) spike and CJ state and different thereafter. Comparison of profiles with differing support, therefore, allows us to estimate reaction zone lengths. For the TATB based explosive, a reaction zone length of ≈3.9 mm, 500 ns was measured in EDC-35, and a reaction zone length of ≈6.3 mm, 800 ns was measured in PBX 9502 pre-cooled to -55° C. The respective VN spike state was 2.25±0.05 km/s in EDC-35 and 2.4±0.1 km/s in the cooled PBX 9502. We do not believe we have resolved either the VN spike state (>2.6 km/s) nor the reaction zone length (≪50 ns) in the HMX based explosives.

  13. Comparison of Global Sizing Velocimetry and Phase Doppler Anemometry measurements of alternative jet fuel sprays

    Science.gov (United States)

    Sadr, Reza; Kannaiyan, Kumaran

    2013-11-01

    Atomization plays a crucial precursor role in liquid fuel combustion that directly affects the evaporation, mixing, and emission levels. Laser diagnostic techniques are often used to study the spray characteristics of liquid fuels. The objective of this work is to compare the spray measurements of Gas-to Liquid (GTL) jet fuels obtained using Global Sizing Velocimetry (GSV) and Phase Doppler Anemometry (PDA) techniques at global and local levels, respectively. The chemical and physical properties of GTL fuels are different from conventional jet fuels, owing to the difference in their production methodology. In this work, the experimental facility, the measurement techniques, and spray characteristics of two different GTL fuels are discussed and compared with those of Jet A-1 fuel. Results clearly demonstrate that although the global measurement gives an overall picture of the spray, fine details are obtained only through local measurements and complement in gaining more inferences into the spray characteristics. The results also show a close similarity in spray characteristics between GTL and Jet A-1 fuels. Funded by Qatar Science and Technology Park.

  14. Dynamic Data Filtering of Long-Range Doppler LiDAR Wind Speed Measurements

    Directory of Open Access Journals (Sweden)

    Hauke Beck

    2017-06-01

    Full Text Available Doppler LiDARs have become flexible and versatile remote sensing devices for wind energy applications. The possibility to measure radial wind speed components contemporaneously at multiple distances is an advantage with respect to meteorological masts. However, these measurements must be filtered due to the measurement geometry, hard targets and atmospheric conditions. To ensure a maximum data availability while producing low measurement errors, we introduce a dynamic data filter approach that conditionally decouples the dependency of data availability with increasing range. The new filter approach is based on the assumption of self-similarity, that has not been used so far for LiDAR data filtering. We tested the accuracy of the dynamic data filter approach together with other commonly used filter approaches, from research and industry applications. This has been done with data from a long-range pulsed LiDAR installed at the offshore wind farm ‘alpha ventus’. There, an ultrasonic anemometer located approximately 2.8 km from the LiDAR was used as reference. The analysis of around 1.5 weeks of data shows, that the error of mean radial velocity can be minimised for wake and free stream conditions.

  15. Correcting acoustic Doppler current profiler discharge measurements biased by sediment transport

    Science.gov (United States)

    Mueller, D.S.; Wagner, C.R.

    2007-01-01

    A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) is attributed to the movement of sediment on or near the streambed, and is an issue widely acknowledged by the scientific community. The integration of a differentially corrected global positioning system (DGPS) to track the movement of the ADCP can be used to avoid the systematic bias associated with a moving bed. DGPS, however, cannot provide consistently accurate positions because of multipath errors and satellite signal reception problems on waterways with dense tree canopy along the banks, in deep valleys or canyons, and near bridges. An alternative method of correcting for the moving-bed bias, based on the closure error resulting from a two-way crossing of the river, is presented. The uncertainty in the mean moving-bed velocity measured by the loop method is shown to be approximately 0.6cm/s. For the 13 field measurements presented, the loop method resulted in corrected discharges that were within 5% of discharges measured utilizing DGPS to compensate for moving-bed conditions. ?? 2007 ASCE.

  16. Evaluation of a new high power, wide separation laser Doppler probe : Potential measurement of deeper tissue blood flow

    NARCIS (Netherlands)

    Clough, Geraldine; Chipperfield, Andrew; Byrne, Christopher; de Mul, Frits; Gush, Rodney

    2009-01-01

    Objective: To compare the output from a novel high power, wide separation laser Doppler flow probe (DP1-V2-HP, 4 mm, with IRLD20) with that of a standard flow probe (DP1-V2, 0.5 mm, with DRT4) (Moor UK) and to explore its potential for use in the noninvasive measurement of blood flow in deeper tissu

  17. Estimation of aircraft wake vortex parameters from data measured with a 1.5-μm coherent Doppler lidar.

    Science.gov (United States)

    Smalikho, I N; Banakh, V A

    2015-07-15

    A strategy of measurement by a 1.5-μm pulsed coherent Doppler lidar "Stream Line" has been developed, and a method for estimation of aircraft wake vortices from the lidar data has been proposed. The principal possibility of obtaining the information about the vortex situation over an airport airfield with the Stream-Line lidar has been demonstrated.

  18. Doppler effect in a solid medium: Spin wave emission by a precessing domain wall drifting in spin current

    Science.gov (United States)

    Xia, Hong; Chen, Jie; Zeng, Xiaoyan; Yan, Ming

    2016-04-01

    The Doppler effect is a fundamental physical phenomenon observed for waves propagating in vacuum or various media, commonly gaseous or liquid. Here, we report on the occurrence of a Doppler effect in a solid medium. Instead of a real object, a topological soliton, i.e., a magnetic domain wall (DW) traveling in a current-carrying ferromagnetic nanowire, plays the role of the moving wave source. The Larmor precession of the DW in an external field stimulates emission of monochromatic spin waves (SWs) during its motion, which show a significant Doppler effect, comparable to the acoustic one of a train whistle. This process involves two prominent spin-transfer-torque effects simultaneously, the current-driven DW motion and the current-induced SW Doppler shift. The latter gives rise to an interesting feature, i.e., the observed SW Doppler effect appears resulting from a stationary source and a moving observer, contrary to the laboratory frame.

  19. The Doppler effect and the three most famous experiments for special relativity

    Science.gov (United States)

    Klinaku, Shukri

    Using the general formula for the Doppler effect at any arbitrary angle, the three famous experiments for special theory of relativity will be examined. Explanation of the experiments of Michelson, Kennedy-Thorndike and Ives-Stilwell will be given in a precise and elegant way without postulates, arbitrary assumptions or approximations.

  20. [Ultrasonography and Doppler effect, an original method for the early and dynamic evaluation of bone callus].

    Science.gov (United States)

    Elanga, M; Bouche, B; Putz, P; Dumont, N

    1997-12-01

    The authors describe an original and simple method for monitoring bone healing, based upon ultrasonography and the Doppler effect. They present four cases of diaphyseal fractures followed by this method and correlated with clinical findings. This noninvasive and inexpensive method of investigation is full of prospect for the monitoring of bone healing after fracture.

  1. Recognition of binary x-ray systems utilizing the doppler effect

    Science.gov (United States)

    Novak, B. L.

    1980-01-01

    The possibility of recognizing the duality of a single class of X-ray systems utilizing the Doppler effect is studied. The procedure is based on the presence of a period which coincides with the orbital period at the intensity of the radiation in a fixed energy interval of the X-ray component of a binary system.

  2. Acute Effects of Hemodialysis on Left and Right Ventricular Function: A Doppler Tissue Imaging Study

    Directory of Open Access Journals (Sweden)

    Tansel Erol

    2012-08-01

    Full Text Available Purpose: Doppler tissue imaging (DTI allows noninvasive assessment of both left ventricular (LV and right ventricular (RV function. The aim of this study was to evaluate the effect of hemodialysis (HD on LV and RV function using DTI. Method: Our study group included 30 patients on chronic HD program (mean age 45 15 years. Myocardial (Sm, Em, Am and annular velocities (Ea, Aa were measured in several cardiac territories before and after HD. Results: After HD, Ea significantly reduced from 10.8 3.4 cm/s to 9.6 2.4 cm/s (p = 0.029. Patients exhibited a lower Em following HD in all measured territories. Em/Am ratio was also reduced for each LV wall investigated after HD in all measured territories. At the RV segments, Sm, Em, and Am decreased significantly in all measured territories. Em of the anterior wall was positively related to ultrafiltration volume (r = 0.25, p = 0.006, whereas the decrease of Sm of RV basal segment correlated with a decrease of diastolic blood pressure (r = 0.23, p < 0.01. Conclusion: Our data indicate that a single HD session is associated with acute changes of systolic and diastolic parameters of LV and RV. [Cukurova Med J 2012; 37(4.000: 215-222

  3. Modal parameter determination of a lightweight aerospace panel using laser Doppler vibrometer measurements

    Science.gov (United States)

    de Sousa, Kleverson C.; Domingues, Allan C.; Pereira, Pedro P. de S.; Carneiro, Sergio H.; de Morais, Marcus V. G.; Fabro, Adriano T.

    2016-06-01

    The experimental determination of modal parameters, i.e. natural frequencies, mode shapes and damping ratio, are key in characterizing the dynamic behaviour of structures. Typically, such parameters are obtained from dynamic measurements using one or a set of accelerometers, for response measurements, along with force transducers from an impact hammer or an electrodynamic actuator, i.e. a shaker. However, lightweight structures, commonly applied in the aerospace industry, can be significantly affected by the added mass from accelerometers. Therefore, non-contact measurement techniques, like Laser Doppler Vibrometer (LDV), are a more suitable approach in determining the dynamic characteristics of such structures. In this article, the procedures and results of a modal test for a honeycomb sandwich panel for aerospace applications are presented and discussed. The main objectives of the test are the identification of natural frequencies and mode shapes in order to validate a numerical model, as well as the identification of the damping characteristics of the panel. A validated numerical model will be necessary for future detailed response analysis of the satellite, including vibroacoustic investigations to account for acoustic excitations encountered during launching. The numerical model using homogenised material properties is updated to fit the experimental results and very good agreement between experimental and numerically obtained natural frequencies and mode shapes.

  4. Absorption measurement of acoustic materials using a scanning laser Doppler vibrometer

    Science.gov (United States)

    Vanlanduit, Steve; Vanherzeele, Joris; Guillaume, Patrick; de Sitter, Gert

    2005-03-01

    In this article a method is proposed to estimate the normal incidence reflection ratio and absorption coefficient of acoustical materials using measurements in a transparent tube excited with a loudspeaker and terminated with the material under investigation. The waveforms are measured at different locations in the tube using a scanning laser Doppler vibrometer. Because the measurement probe (i.e., the laser beam) does not interfere with the wave in the tube, narrow tubes can be used. This means that-in contrast to the standardized wide tube tests using microphones-the proposed experiment could be used for high frequencies (in the paper an 8 mm tube was used, resulting in a 25 kHz upper frequency limit). It is shown based on theoretically known scenarios (i.e., an open tube and a rigid termination) that the absorption coefficient can be obtained with an error of about three percent. In addition, the absorption coefficient of two commonly used absorption materials-glass fiber wool and carpet-were determined and found to be in good agreement with material databases. .

  5. The Doppler Effect based acoustic source separation for a wayside train bearing monitoring system

    Science.gov (United States)

    Zhang, Haibin; Zhang, Shangbin; He, Qingbo; Kong, Fanrang

    2016-01-01

    Wayside acoustic condition monitoring and fault diagnosis for train bearings depend on acquired acoustic signals, which consist of mixed signals from different train bearings with obvious Doppler distortion as well as background noises. This study proposes a novel scheme to overcome the difficulties, especially the multi-source problem in wayside acoustic diagnosis system. In the method, a time-frequency data fusion (TFDF) strategy is applied to weaken the Heisenberg's uncertainty limit for a signal's time-frequency distribution (TFD) of high resolution. Due to the Doppler Effect, the signals from different bearings have different time centers even with the same frequency. A Doppler feature matching search (DFMS) algorithm is then put forward to locate the time centers of different bearings in the TFD spectrogram. With the determined time centers, time-frequency filters (TFF) are designed with thresholds to separate the acoustic signals in the time-frequency domain. Then the inverse STFT (ISTFT) is taken and the signals are recovered and filtered aiming at each sound source. Subsequently, a dynamical resampling method is utilized to remove the Doppler Effect. Finally, accurate diagnosis for train bearing faults can be achieved by applying conventional spectrum analysis techniques to the resampled data. The performance of the proposed method is verified by both simulated and experimental cases. It shows that it is effective to detect and diagnose multiple defective bearings even though they produce multi-source acoustic signals.

  6. Effect of Magnesium Sulfate on Doppler Parameters of Fetal Umbilical and Middle Cerebral Arteries in Women with Severe Preeclampsia

    Directory of Open Access Journals (Sweden)

    Nazanin Farshchian

    2012-01-01

    Full Text Available Objective: To assess the effect of injecting magnesium sulfate on Doppler parameters of fetal umbilical and middle cerebral arteries (MCA in women with severe preeclampsia. Materials and Methods: A total of 21 patients with severe preeclampsia admitted to Imam Reza Hospital, Kermanshah (Iran, were evaluated. Before and after administration of magnesium sulfate, Doppler ultrasound scan was carried out to measure fetal middle cerebral artery and umbilical artery blood flow. Paired t-test was used for statistical analysis. Results: After injection of magnesium sulfate, the mean resistivity index (RI-umbilical, and pulsatility index (PI-cerebral showed a statistically significant reduction ( P < 0.001. The cerebroumbilical C/U ratio increased after the intervention ( P < 0.001. The PI-umbilical ( P = 0.1 and pre- and post-RI-cerebral ( P = 0.96 did not have statistically significant changes. Conclusions: Infusion of magnesium sulfate significantly decreases the flow in the fetus RI-umbilical and PI-MCA, and it increases C/U ratio indices in color Doppler ultrasound.

  7. Inertial Navigation System/Doppler Velocity Log (INS/DVL Fusion with Partial DVL Measurements

    Directory of Open Access Journals (Sweden)

    Asaf Tal

    2017-02-01

    Full Text Available The Technion autonomous underwater vehicle (TAUV is an ongoing project aiming to develop and produce a small AUV to carry on research missions, including payload dropping, and to demonstrate acoustic communication. Its navigation system is based on an inertial navigation system (INS aided by a Doppler velocity log (DVL, magnetometer, and pressure sensor (PS. In many INSs, such as the one used in TAUV, only the velocity vector (provided by the DVL can be used for aiding the INS, i.e., enabling only a loosely coupled integration approach. In cases of partial DVL measurements, such as failure to maintain bottom lock, the DVL cannot estimate the vehicle velocity. Thus, in partial DVL situations no velocity data can be integrated into the TAUV INS, and as a result its navigation solution will drift in time. To circumvent that problem, we propose a DVL-based vehicle velocity solution using the measured partial raw data of the DVL and additional information, thereby deriving an extended loosely coupled (ELC approach. The implementation of the ELC approach requires only software modification. In addition, we present the TAUV six degrees of freedom (6DOF simulation that includes all functional subsystems. Using this simulation, the proposed approach is evaluated and the benefit of using it is shown.

  8. Inertial Navigation System/Doppler Velocity Log (INS/DVL) Fusion with Partial DVL Measurements

    Science.gov (United States)

    Tal, Asaf; Klein, Itzik; Katz, Reuven

    2017-01-01

    The Technion autonomous underwater vehicle (TAUV) is an ongoing project aiming to develop and produce a small AUV to carry on research missions, including payload dropping, and to demonstrate acoustic communication. Its navigation system is based on an inertial navigation system (INS) aided by a Doppler velocity log (DVL), magnetometer, and pressure sensor (PS). In many INSs, such as the one used in TAUV, only the velocity vector (provided by the DVL) can be used for aiding the INS, i.e., enabling only a loosely coupled integration approach. In cases of partial DVL measurements, such as failure to maintain bottom lock, the DVL cannot estimate the vehicle velocity. Thus, in partial DVL situations no velocity data can be integrated into the TAUV INS, and as a result its navigation solution will drift in time. To circumvent that problem, we propose a DVL-based vehicle velocity solution using the measured partial raw data of the DVL and additional information, thereby deriving an extended loosely coupled (ELC) approach. The implementation of the ELC approach requires only software modification. In addition, we present the TAUV six degrees of freedom (6DOF) simulation that includes all functional subsystems. Using this simulation, the proposed approach is evaluated and the benefit of using it is shown. PMID:28241410

  9. Laser Doppler anemometry measurements of steady flow through two bi-leaflet prosthetic heart valves

    Directory of Open Access Journals (Sweden)

    Ovandir Bazan

    2013-12-01

    Full Text Available INTRODUCTION: In vitro hydrodynamic characterization of prosthetic heart valves provides important information regarding their operation, especially if performed by noninvasive techniques of anemometry. Once velocity profiles for each valve are provided, it is possible to compare them in terms of hydrodynamic performance. In this first experimental study using laser doppler anemometry with mechanical valves, the simulations were performed at a steady flow workbench. OBJECTIVE: To compare unidimensional velocity profiles at the central plane of two bi-leaflet aortic prosthesis from St. Jude (AGN 21 - 751 and 21 AJ - 501 models exposed to a steady flow regime, on four distinct sections, three downstream and one upstream. METHODS: To provide similar conditions for the flow through each prosthesis by a steady flow workbench (water, flow rate of 17L/min. and, for the same sections and sweeps, to obtain the velocity profiles of each heart valve by unidimensional measurements. RESULTS: It was found that higher velocities correspond to the prosthesis with smaller inner diameter and instabilities of flow are larger as the section of interest is closer to the valve. Regions of recirculation, stagnation of flow, low pressure, and flow peak velocities were also found. CONCLUSIONS: Considering the hydrodynamic aspect and for every section measured, it could be concluded that the prosthesis model AGN 21 - 751 (RegentTM is superior to the 21 AJ - 501 model (Master Series. Based on the results, future studies can choose to focus on specific regions of the these valves.

  10. Simultaneous wind and temperature measurements in the middle atmosphere with a twin Doppler lidar

    Science.gov (United States)

    Hildebrand, Jens; Baumgarten, Gerd; Fiedler, Jens; Lübken, Franz-Josef

    2016-04-01

    Winds play an important role for the filtering of gravity waves traveling from the ground to higher altitudes. They control the propagation of gravity waves and the amount of transported energy and momentum. The thermal structure of the atmosphere determines its stability, hence the buoyancy frequency. Therefore, knowing winds and temperatures in the middle atmosphere is crucial to study and interpret atmospheric dynamics comprehensively. Both temperature and wind affect the propagation of infrasound waves through the middle atmosphere. Observing winds and temperatures in the middle atmosphere on routine basis is challenging since a large part of this altitude range is not accessible by radars or satellites. Using the Doppler Rayleigh Iodine Spectrometer DoRIS, our Rayleigh/Mie/Raman lidar at the Arctic station ALOMAR in Northern Norway (69°N, 16°E) is capable to measure winds and temperatures simultaneously in the middle atmosphere between about 20 and 80 km altitude. Since two independently steerable telescopes are used, we can derive two wind components at once. Winds and temperatures are measured even under daylight conditions, yielding observations spanning multiple days, which is essential for, e.g., gravity-wave studies. We will present results from case studies and a larger data set covering winter situations between 2012 and 2015, including stratospheric warmings and periods of enhanced gravity wave activity.

  11. Acoustic Doppler current profiler measurements in coastal and estuarine environments: examples from the Tay Estuary, Scotland

    Science.gov (United States)

    Wewetzer, Silke F. K.; Duck, Robert W.; Anderson, James M.

    1999-08-01

    Acoustic Doppler current profilers (ADCPs) provide a means to measure the components of water current velocities in three dimensions. Such instruments have been used widely by the oil industry in deep offshore waters but their application to nearshore coastal and estuarine environments has been principally confined to the USA. Using examples of ADCP datasets acquired from the macrotidal Tay Estuary, eastern Scotland, the principles of field deployment, data acquisition and forms of output are critically summarised. It is shown, for the first time in the Tay Estuary, that vertical current velocities are significant and are particularly so in downwelling zones associated with the development and passage of axially convergent tidal fronts. The improved understanding of three-dimensional water and suspended sediment dynamics in coastal and estuarine waters is crucial to, inter alia, the sustainable management of effluent discharges and, in more general terms, it is predicted on the basis of the Tay case study, that ADCP measurements afford significant opportunities to refine understanding of geomorphological processes in a variety of aquatic environments worldwide.

  12. Inertial Navigation System/Doppler Velocity Log (INS/DVL) Fusion with Partial DVL Measurements.

    Science.gov (United States)

    Tal, Asaf; Klein, Itzik; Katz, Reuven

    2017-02-22

    The Technion autonomous underwater vehicle (TAUV) is an ongoing project aiming to develop and produce a small AUV to carry on research missions, including payload dropping, and to demonstrate acoustic communication. Its navigation system is based on an inertial navigation system (INS) aided by a Doppler velocity log (DVL), magnetometer, and pressure sensor (PS). In many INSs, such as the one used in TAUV, only the velocity vector (provided by the DVL) can be used for aiding the INS, i.e., enabling only a loosely coupled integration approach. In cases of partial DVL measurements, such as failure to maintain bottom lock, the DVL cannot estimate the vehicle velocity. Thus, in partial DVL situations no velocity data can be integrated into the TAUV INS, and as a result its navigation solution will drift in time. To circumvent that problem, we propose a DVL-based vehicle velocity solution using the measured partial raw data of the DVL and additional information, thereby deriving an extended loosely coupled (ELC) approach. The implementation of the ELC approach requires only software modification. In addition, we present the TAUV six degrees of freedom (6DOF) simulation that includes all functional subsystems. Using this simulation, the proposed approach is evaluated and the benefit of using it is shown.

  13. Time-resolved measurement of bubble cavitation by using power Doppler ultrasound image

    Science.gov (United States)

    Koda, Ren; Izumi, Yosuke; Nagai, Hayato; Yamakoshi, Yoshiki

    2017-04-01

    In this study, a novel measurement method for a secondary ultrasound wave irradiated by microbubble cavitation is proposed. High-intensity ultrasound (h-US, 1.0–1.5 MPa), which produces bubble cavitation, is irradiated with a fixed time delay after introducing imaging US, whose frequency is different from that of the h-US. The bubble cavitation signal (BCS) is detected by the signal-processing unit of an ultrasound power Doppler imaging instrument. By this method, both a spatially resolved bubble image (S-image) and the temporal transition of the BCS (T-image) are monitored simultaneously. A feature of the method is that the BCS is observed in situ with sub-µs time resolution. The accuracy of the method is evaluated and it is found that the maximum deviation of the amplitude of the simulated BCS is 4.80%. This method is applied to measure the BCS of ultrasound contrast agent microbubbles. As a result, the dependence of the inherent temporal transition of the BCS on the sound pressure of the h-US (0.6–1.2 MPa) is observed.

  14. Innovative Coal Solids-Flow Monitoring and Measurement Using Phase-Doppler and Mie Scattering Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Seong Lee

    2010-01-19

    Fuel flow to individual burners is complicated and difficult to determine on coal fired boilers, since coal solids were transported in a gas suspension that is governed by the complex physics of two-phase flow. The objectives of the project were the measurements of suspended coal solids-flows in the simulated test conditions. Various extractive methods were performed manually and can give only a snapshot result of fuel distribution. In order to measure particle diameter & velocity, laser based phase-Doppler particle analyzer (PDPA) and particle image velocimetry (PIV) were carefully applied. Statistical methods were used to analyze particle characteristics to see which factors have significant effect. The transparent duct model was carefully designed and fabricated for the laser-based-instrumentation of solids-flow monitoring (LISM). The experiments were conducted with two different kinds of particles with four different particle diameters. The particle types were organic particles and saw dust particles with the diameter range of 75-150 micron, 150-250 micron, 250-355 micron and 355-425 micron. The densities of the particles were measured to see how the densities affected the test results. Also the experiment was conducted with humid particles and fog particles. To generate humid particles, the humidifier was used. A pipe was connected to the humidifier to lead the particle flow to the intersection of the laser beam. The test results of the particle diameter indicated that, the mean diameter of humid particles was between 6.1703 microns and 6.6947 microns when the humid particle flow was low. When the humid particle flow was high, the mean diameter was between 6.6728 microns and 7.1872 microns. The test results of the particle mean velocity indicated that the mean velocity was between 1.3394 m/sec and 1.4556 m/sec at low humid particle flow. When the humid particle flow was high, the mean velocity was between 1.5694 m/sec and 1.7856 m/sec. The Air Flow Module, TQ

  15. Classification of micro-Doppler signatures of human aquatic activity through simulation and measurement using transferred learning

    Science.gov (United States)

    Kim, Youngwook; Park, Jinhee; Moon, Taesup

    2017-05-01

    Remote detection of human aquatic activity can be applied not only to ocean surveillance but also to rescue operations. When a human is illuminated by electromagnetic waves, a Doppler signal is generated from his or her moving parts. Indeed, bodily movements are what make humans' micro-Doppler signatures unique, offering a chance to classify human motions. Certain studies have analyzed and attempted to recognize human aquatic activity, but the topic has yet to be extensively studied. In the present research, we simulate the micro-Doppler signatures of a swimming person in an attempt to investigate those signatures' characteristics. We model human arms as point scatterers while assuming a simple arm motion. By means of such a simulation, we can obtain spectrograms from a swimming person, then extend our measurement to multiple participants. Measurements are taken from five aquatic activities featuring five participants, comprising freestyle, backstroke, and breaststroke, pulling a boat, and rowing. As suggested by the simulation study, the spectrograms for the five activities show different micro-Doppler signatures; hence, we propose to classify them using a deep convolutional neural network (DCNN). In particular, we suggest the use of a transfer-learned DCNN, which is based on a DCNN pretrained by a large-scale RGB image dataset that is, ImageNet. The classification accuracy is calculated using fivefold cross-validation on our dataset. We find that a DCNN trained through transfer learning achieves the highest accuracy while also providing a significant performance boost over the conventional classification method.

  16. Fiber-Based Doppler Lidar for Vector Velocity and Altitude Measurements

    Science.gov (United States)

    Amzajerdian, Farzin; Pierrottet, Diego; Hines, Glenn; Petway, Larry; Barnes, Bruce

    2015-01-01

    A coherent Doppler lidar capable of providing accurate velocity and altitude data has been developed and demonstrated for future NASA missions to the solar system bodies requiring precision navigation and controlled soft landing.

  17. The EarthCARE space-borne Doppler 94 GHz radar simulator: correction of multiple scattering, aliasing and NUBF and effects of variable along track integration

    Science.gov (United States)

    Augustynek, T.; Battaglia, A.; Kollias, P.

    2011-12-01

    The primary goal of this work is to address several challenges related to spaceborne Doppler radars like future the EarthCARE mission and recent developments of data simulation, correction and processing. The 94 GHz Cloud Profiling Radar onboard the ESA EarthCARE mission will be the first radar in space with Doppler capability allowing mean Doppler velocity measurements. This will enable more accurate characterization of clouds and precipitation (classification, retrieval accuracy, dynamics). It is the only instrument of this kind planned for the immediate post-CloudSat era and represents an irreplaceable asset in regards to climate change studies. Meeting the scientific accuracy requirements of vertical motions of 1 m/s, with a horizontal resolution of 1 km, is very challenging. The five key factors that control the performance of spaceborne radar will be discussed, such as: contribution of multiple scattering (MS), attenuation, velocity folding, non uniform beam filling (NUBF) and effects of along track integration of the signal. The research utilizes an end-to-end simulator for spaceborne Doppler radars. The simulator uses a Monte Carlo module which accounts for MS and produces ideal Doppler spectra as measured by a spaceborne radar flying over 3D highly resolved scenes produced via WRF Model simulations. The estimates of the Doppler moments (reflectivity, mean Doppler velocity and spectrum width) are achieved via the pulse pair technique. The objective method for identification of MS-contaminated range-bins based purely on the reflectivity-derived variables is described, with most important one, cumulative integrated reflectivity, found to be 41 dBZ_int which serves as the threshold value for identification of radar range gates contaminated by MS. This is further demonstrated in a CloudSat case study with the threshold value for CloudSat is found to be 41.9 dBZ_int. The unfolding procedure of Doppler velocities will be presented. Then we will describe the

  18. Analysis and compensation for code Doppler effect of BDS II signal under high dynamics

    Science.gov (United States)

    Ouyang, Xiaofeng; Zeng, Fangling

    2016-01-01

    In high dynamic circumstances, the acquisition of BDS (BeiDou Navigation Satellite System) signal would be affected by the pseudo-code Doppler. The pseudo-code frequency shift is more prominent and complex when BOC modulation has been adopted by BDS-II, but is not yet involved in current compensation algorithm. In addition, the most frequently used code Doppler compensation algorithm is modifying the sampling rate or local bit rate, which not only increases the complexity of the acquisition and tracking, but also is barely realizable for the hardware receiver to modify the local frequency. Therefore, this paper proposes a code Doppler compensation method based on double estimator receiver, which simultaneously controls NCO delay of code tracking loop and subcarrier tracking loop to compensate for pseudo-code frequency shift. The simulation and test are implemented with BDS-II BOC signal. The test results demonstrate that the proposed algorithm can effectively compensate for pseudo-code Doppler of BOC signal and has detection probability 3dB higher than the uncompensated situation when the false alarm rate is under 0.01 and the coherent integration time is 1ms.

  19. Differential doppler heterodyning technique

    DEFF Research Database (Denmark)

    Lading, Lars

    1971-01-01

    Measuring velocity without disturbing the moving object is possible by use of the laser doppler heterodyning technique. Theoretical considerations on the doppler shift show that the antenna property of the photodetector can solve an apparent conflict between two different ways of calculating...... the detected doppler frequency. It is found that the doppler frequency for this particular setup is independent of the direction of detection. Investigations of the signal-to-noise ratio (SNR) show that the maximum SNR-considering the optical setup-is obtained by measuring the frequency difference between two...

  20. Feasibility of intercostal blood flow measurement by echo-Doppler technique in healthy subjects.

    Science.gov (United States)

    de Bisschop, Claire; Montaudon, Michel; Glénet, Stéphane; Guénard, Hervé

    2017-05-01

    Intercostal artery blood flow supplies the external and internal intercostal muscles, which are inspiratory and expiratory muscles. Intercostal blood flow measured by the echo-Doppler (ED) technique has not previously been reported in humans. This study describes the feasibility of this measurement during free and loaded breathing in healthy subjects. Systolic, diastolic and mean blood flows were measured in the eighth dorsal intercostal space during free and loaded breathing using the ED technique. Flows were calculated as the product of the artery intraluminal surface and blood velocity. Ten healthy subjects (42 ± 13·6 years) were included. Integrated electromyogram (iEMG), arterial pressure, cardiac frequency and breathing pattern were also recorded. Mean blood flows were 3·5 ± 1·2 ml min(-1) at rest, 6 ± 2·6 ml min(-1) while breathing through a combined inspiratory and expiratory resistance and 4·0 ± 1·3 ml min(-1) 1 min after unloading. Diastolic blood flow was about one-third the systolic blood flow. The changes in blood flows were consistent with those in iEMG. No change in mean blood flow was observed between inspiration and expiration, suggesting a balance in the perfusion of external and internal muscles during breathing. In conclusion, ED is a feasible technique for non-invasive, real-time measurement of intercostal blood flow in humans. In healthy subjects, mean blood flow appeared tightly matched to iEMG activity. This technique may provide a way to assess the vascular adaptations induced by diseases in which respiratory work is increased or cardiac blood flow altered. © 2015 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

  1. Full-field linear and nonlinear measurements using Continuous-Scan Laser Doppler Vibrometry and high speed Three-Dimensional Digital Image Correlation

    Science.gov (United States)

    Ehrhardt, David A.; Allen, Matthew S.; Yang, Shifei; Beberniss, Timothy J.

    2017-03-01

    Spatially detailed dynamic measurements of thin, lightweight structures can be difficult to obtain due to the structure's low mass and complicated deformations under certain loading conditions. If traditional contacting sensors, such as accelerometers, strain gauges, displacement transducers, etc., are used, the total number of measurement locations available is limited by the weight added and the effect each sensor has on the local stiffness of the contact area. Other non-contacting sensors, such as Laser Doppler Vibrometers (LDV), laser triangulation sensors, proximity sensors, etc., do not affect the dynamics of a structure, but are limited to single point measurements. In contrast, a few recently developed non-contacting measurement techniques have been shown to be capable of simultaneously measuring the response over a wide measurement field. Two techniques are considered here: Continuous-Scan Laser Doppler Vibrometry (CSLDV) and high speed Three-Dimensional Digital Image Correlation (3D DIC). With the use of these techniques, unprecedented measurement resolution can be achieved. In this work, the linear and nonlinear deformations of a clamped, nominally flat beam and plate under steady state sinusoidal loading will be measured using both techniques. In order to assess their relative merits, the linear natural frequencies, mode shapes, and nonlinear deformation shapes measured with each method are compared. Both measurement systems give comparable results in many cases, although 3D DIC is more accurate for spatially complex deformations at large amplitudes and CSLDV is more accurate at low amplitudes and when the spatial deformation pattern is simpler.

  2. Innovative Coal Solids-Flow Monitoring and Measurement Using Phase-Doppler and Mie Scattering Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Seong Lee

    2010-01-19

    Fuel flow to individual burners is complicated and difficult to determine on coal fired boilers, since coal solids were transported in a gas suspension that is governed by the complex physics of two-phase flow. The objectives of the project were the measurements of suspended coal solids-flows in the simulated test conditions. Various extractive methods were performed manually and can give only a snapshot result of fuel distribution. In order to measure particle diameter & velocity, laser based phase-Doppler particle analyzer (PDPA) and particle image velocimetry (PIV) were carefully applied. Statistical methods were used to analyze particle characteristics to see which factors have significant effect. The transparent duct model was carefully designed and fabricated for the laser-based-instrumentation of solids-flow monitoring (LISM). The experiments were conducted with two different kinds of particles with four different particle diameters. The particle types were organic particles and saw dust particles with the diameter range of 75-150 micron, 150-250 micron, 250-355 micron and 355-425 micron. The densities of the particles were measured to see how the densities affected the test results. Also the experiment was conducted with humid particles and fog particles. To generate humid particles, the humidifier was used. A pipe was connected to the humidifier to lead the particle flow to the intersection of the laser beam. The test results of the particle diameter indicated that, the mean diameter of humid particles was between 6.1703 microns and 6.6947 microns when the humid particle flow was low. When the humid particle flow was high, the mean diameter was between 6.6728 microns and 7.1872 microns. The test results of the particle mean velocity indicated that the mean velocity was between 1.3394 m/sec and 1.4556 m/sec at low humid particle flow. When the humid particle flow was high, the mean velocity was between 1.5694 m/sec and 1.7856 m/sec. The Air Flow Module, TQ

  3. A comparison of Doppler lidar wind sensors for Earth-orbit global measurement applications

    Science.gov (United States)

    Menzies, Robert T.

    1985-01-01

    Now, there are four Doppler lidar configurations which are being promoted for the measurement of tropospheric winds: (1) the coherent CO2 Lidar, operating in the 9 micrometer region using a pulsed, atmospheric pressure CO2 gas discharge laser transmitter, and heterodyne detection; (2) the coherent Neodymium doped YAG or Glass Lidar, operating at 1.06 micrometers, using flashlamp or diode laser optical pumping of the solid state laser medium, and heterodyne detection; (3) the Neodymium doped YAG/Glass Lidar, operating at the doubled frequency (at 530 nm wavelength), again using flashlamp or diode laser pumping of the laser transmitter, and using a high resolution tandem Fabry-Perot filter and direct detection; and (4) the Raman shifted Xenon Chloride Lidar, operating at 350 nm wavelength, using a pulsed, atmospheric pressure XeCl gas discharge laser transmitter at 308 nm, Raman shifted in a high pressure hydrogen cell to 350 nm in order to avoid strong stratospheric ozone absorption, also using a high resolution tandem Fabry-Perot filter and direct detection. Comparisons of these four systems can include many factors and tradeoffs. The major portion of this comparison is devoted to efficiency. Efficiency comparisons are made by estimating the number of transmitted photons required for a single pulse wind velocity estimate of + or - 1 m/s accuracy in the middle troposphere, from an altitude of 800 km, which is assured to be reasonable for a polar orbiting platform.

  4. Study on Dynamic Compression Properties of K9 Glass with Doppler Pins Array Measurements

    Science.gov (United States)

    Changming, Hu; Xiang, Wang; Lingcang, Cai; Cangli, Liu

    2009-06-01

    K9 glass is one of archetypal brittle materials for studies of dynamic fracture, failure wave, and so on. This paper presented the dynamic compression properties of K9 glass under uniaxial strain condition. Experimental sample is K9 glass with internal pre-existed defects, and the shape of pre-existed defects is disc with less than 0.5 mm diameter. All tests were conducted by power gun with 37 mm diameter chamber. Doppler Pins array with high space-time resolutions, which consists of sixteen pins in range of 2 mm line length, were applied to measure the particle velocity histories in different positions at the sample rear surface, and the space-resolution is 127 μm, Experimental results show failure waves initiate at internal micro-surfaces of the sample under shock loading, and the dynamic stress concentration is likely attributed to be a physical mechanism of the initiation of the failure wave. These defects that by the controlled laser irradiation in advance are some internal micro-surfaces. Meanwhile, the experimental results show that internal micro-surfaces of the sample have influence on the elastic precursor wave decay.

  5. Laser Doppler anemometer measurements of pulsatile flow in a model carotid bifurcation.

    Science.gov (United States)

    Ku, D N; Giddens, D P

    1987-01-01

    Hemodynamics at the human carotid bifurcation is important to the understanding of atherosclerotic plaque initiation and progression as well as to the diagnosis of clinically important disease. Laser Doppler anemometry was performed in a large scale model of an average human carotid. Pulsatile waveforms and physiologic flow divisions were incorporated. Disturbance levels and shear stresses were computed from ensemble averages of the velocity waveform measurements. Flow in the common carotid was laminar and symmetric. Flow patterns in the sinus, however, were complex and varied considerably during the cycle. Strong helical patterns and outer wall flow separation waxed and waned during each systole. The changing flow patterns resulted in an oscillatory shear stress at the outer wall ranging from -13 to 9 dyn cm-2 during systole with a time-averaged mean of only -0.5 dyn cm-2. This contrasts markedly with an inner wall shear stress range of 17-50, (mean 26) dyn cm-2. The region of transient separation was confined to the carotid sinus outer wall with no reverse velocities detected in the distal internal carotid. Notable disturbance velocities were also time-dependent, occurring only during the deceleration phase of systole and the beginning of diastole. The present pulsatile flow studies have aided in identifying hemodynamic conditions which correlate with early intimal thickening and predict the physiologic level of flow disturbances in the bulb of undiseased internal carotid arteries.

  6. Doppler ultrasound measurement of resistance index in the diagnosis of prostate cancer.

    Science.gov (United States)

    Huang, Wei; Cen, Son; Kang, Xin-Li; Wang, Wei Fu; Wang, Yang; Chen, Xiang

    2015-01-01

    Prostate cancer (PCa) remains the second leading cause of cancer diagnosis worldwide. Early diagnosis and treatment of PCa is critical since the long-term prognosis is excellent in patients with tumors confined to the prostate gland. The current meta-analysis investigates the diagnostic value of resistive index (RI) measurement using color Doppler ultrasound in patients with PCa. Electronic literature databases were exhaustively searched for relevant studies published prior to May 31, 2014. Nine studies met our predetermined inclusion criteria for the present meta-analysis. The methodologic quality of the selected studies was independently assessed by 2 reviewers based on Quality Assessment of Diagnostic Accuracy Studies tool. Our meta-analysis results showed that RI values were significantly higher in malignant prostate tissues compared to normal prostate tissues (standardized mean difference [SMD] 0.42, 95% confidence interval [CI] 0.12~0.73, p = 0.007) and benign prostate tissues (SMD 0.41, 95% CI 0.26~0.56, p<0.001). Subgroup analysis based on the diagnostic instruments used revealed that RI values were accurate in diagnosis of PCa when compared between malignant tissue vs normal tissue and malignant tissue vs benign tissue (all p<0.05). Taken together, our findings support the potential clinical applications of RI values in diagnosis of PCa.

  7. All-Fiber Airborne Coherent Doppler Lidar to Measure Wind Profiles

    Directory of Open Access Journals (Sweden)

    Liu Jiqiao

    2016-01-01

    Full Text Available An all-fiber airborne pulsed coherent Doppler lidar (CDL prototype at 1.54μm is developed to measure wind profiles in the lower troposphere layer. The all-fiber single frequency pulsed laser is operated with pulse energy of 300μJ, pulse width of 400ns and pulse repetition rate of 10kHz. To the best of our knowledge, it is the highest pulse energy of all-fiber eye-safe single frequency laser that is used in airborne coherent wind lidar. The telescope optical diameter of monostatic lidar is 100 mm. Velocity-Azimuth-Display (VAD scanning is implemented with 20 degrees elevation angle in 8 different azimuths. Real-time signal processing board is developed to acquire and process the heterodyne mixing signal with 10000 pulses spectra accumulated every second. Wind profiles are obtained every 20 seconds. Several experiments are implemented to evaluate the performance of the lidar. We have carried out airborne wind lidar experiments successfully, and the wind profiles are compared with aerological theodolite and ground based wind lidar. Wind speed standard error of less than 0.4m/s is shown between airborne wind lidar and balloon aerological theodolite.

  8. The Modulation of Ionospheric Alfven Resonator on Heating HF Waves and the Doppler Effect

    Institute of Scientific and Technical Information of China (English)

    NiBin-bin; ZhaoZheng-yu; XieShu-guo

    2003-01-01

    The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature varia-tions on the Alfven resonant field, We discuss the mechanism of the modulation effect and lucubrate possible reasons for the Doppler effect. The results show that the Alfven resonant field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR on HF waves has a quasi-quadratic relation with the Alfven field, which directly inspires the formation of cross-spectrum between ULF waves and HF waves and results in spectral peaks at some gyro-frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high-speed flyer and the drifting electrons and the frequency shift from the phase vari-ation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.

  9. Exploring measurement biases associated with esophageal Doppler monitoring in critically ill patients in intensive care unit

    Directory of Open Access Journals (Sweden)

    Stawicki Peter

    2007-01-01

    Full Text Available Background : Esophageal Doppler monitoring (EDM is utilized in numerous clinical settings. This study examines the relationship between pulmonary artery catheter (PAC and EDM-derived hemodynamic parameters, concentrating on gender- and age-related EDM measurement biases. Materials and Methods : Prospective study of EDM use in ventilated surgical ICU patients. Parameters examined included demographics, diagnosis, resuscitation endpoints, cardiac output (CO and stroke volume from both devices, number of personnel and time needed to place equipment, time to data acquisition, duration of use, complications of placement. Results : Fifteen patients (11 men, 4 women, mean age 47 years were included. Most common diagnoses included trauma (7/15 and sepsis (4/15. Insertion time and time to data acquisition were shorter for EDM than for PAC ( P < 0.001. The EDM required an average of 1.1 persons to place (2.4 for PAC, P =0.002. Mean EDM utilization time was 12.4 h. There was a fair CO correlation between EDM and PAC (r = 0.647, P < 0.001. Overall, the EDM underestimated CO relative to PAC (bias -1.42 ± 2.08, 95% CI: -5.58-2.74, with more underestimation in women (mean bias difference of -1.16, P < 0.001. No significant age-related measurement bias differences between PAC and EDM were noted. Significant reductions in lactate and norepinephrine requirement were noted following EDM monitoring periods. Conclusions : This study found that the EDM significantly underestimated cardiac output in women when compared to PAC. Clinicians should be aware of this measurement bias when making therapeutic decision based on EDM data. Significant reductions in lactate and norepinephrine requirement during EDM monitoring periods support the clinical usefulness of EDM technology.

  10. Approach to Doppler Effect%多普勒效应探讨

    Institute of Scientific and Technical Information of China (English)

    贾湘平

    2011-01-01

    在波源与接收器都运动的情况,推导出新的普适多普勒效应公式。新公式表明在不考虑相对论效应时,也存在经典的横向多普勒效应,并给出了实验验证的基本方法。%New Doppler effect formula was derived in a general condition under which wave source and receiver were moving. The new formula shows that when the relativistic effect is not considered, there still exists the classic and transverse Doppler effect, with the experimental method given.

  11. 弯曲时空的多普勒效应%The Doppler Effect in Curved Space-Time

    Institute of Scientific and Technical Information of China (English)

    李沅洪; 吕君丽; 王永久

    2011-01-01

    讨论了狭义相对论中的多普勒效应.研究了任意引力场中,光源和接收器任意运动的情况下的多普勒效应.弯曲时空的多普勒效应对宇宙学研究有重要意义.%The Doppler effect in Special Relativity is discussed, and the Doppler effect under the circumstances of light sources and receptors moving in arbitrary ways in any given gravitational fields is studied. The study on Doppler effect in curved space-time is of great significance to cosmology.

  12. Application of low-coherence optical fiber Doppler anemometry to fluid-flow measurement: optical system considerations

    Science.gov (United States)

    Boyle, William J. O.; Grattan, Kenneth T. V.; Palmer, Andrew W.; Meggitt, B. T.

    1991-08-01

    A fiber optic Doppler anemometric (FODA) sensor using an optical delay cavity technique and having the advantage of detecting velocity rather than simple speed is outlined. In this sensor the delay in a sensor cavity formed from light back-reflected from a fiber tip (Fresnel reflection) and light back-reflected from particles flowing in a fluid is balanced by the optical delay when light from this sensor cavity passes through a reference cavity formed by a combination of the zero and first diffraction orders produced by a Bragg cell inserted into the optical arrangement. The performance of an experimental sensor based on this scheme is investigated, and velocity measurements using the Doppler shift data from moving objects are presented. The sensitivity of the scheme is discussed, with reference to the other techniques of fluid flow measurement.

  13. Laser double Doppler flowmeter

    Science.gov (United States)

    Poffo, L.; Goujon, J.-M.; Le Page, R.; Lemaitre, J.; Guendouz, M.; Lorrain, N.; Bosc, D.

    2014-05-01

    The Laser Doppler flowmetry (LDF) is a non-invasive method for estimating the tissular blood flow and speed at a microscopic scale (microcirculation). It is used for medical research as well as for the diagnosis of diseases related to circulatory system tissues and organs including the issues of microvascular flow (perfusion). It is based on the Doppler effect, created by the interaction between the laser light and tissues. LDF measures the mean blood flow in a volume formed by the single laser beam, that penetrate into the skin. The size of this measurement volume is crucial and depends on skin absorption, and is not directly reachable. Therefore, current developments of the LDF are focused on the use of always more complex and sophisticated signal processing methods. On the other hand, laser Double Doppler Flowmeter (FL2D) proposes to use two laser beams to generate the measurement volume. This volume would be perfectly stable and localized at the intersection of the two laser beams. With FL2D we will be able to determine the absolute blood flow of a specific artery. One aimed application would be to help clinical physicians in health care units.

  14. Photoacoustics meets ultrasound: micro-Doppler photoacoustic effect and detection by ultrasound

    CERN Document Server

    Gao, Fei; Zheng, Yuanjin; Ohl, Claus-Dieter

    2014-01-01

    In recent years, photoacoustics has attracted intensive research for both anatomical and functional biomedical imaging. However, the physical interaction between photoacoustic generated endogenous waves and an exogenous ultrasound wave is a largely unexplored area. Here, we report the initial results about the interaction of photoacoustic and external ultrasound waves leading to a micro-Doppler photoacoustic (mDPA) effect, which is experimentally observed and consistently modelled. It is based on a simultaneous excitation on the target with a pulsed laser and continuous wave (CW) ultrasound. The thermoelastically induced expansion will modulate the CW ultrasound and leads to transient Doppler frequency shift. The reported mDPA effect can be described as frequency modulation of the intense CW ultrasound carrier through photoacoustic vibrations. This technique may open the possibility to sensitively detect the photoacoustic vibration in deep optically and acoustically scattering medium, avoiding acoustic distor...

  15. Doppler-radar wind-speed measurements in tornadoes: A comparison of real and simulated spectra

    Energy Technology Data Exchange (ETDEWEB)

    Bluestein, H.B.; LaDue, J.G.; Stein, H.; Speheger, D. (Oklahoma Univ., Norman, OK (United States)); Unruh, W.P. (Los Alamos National Lab., NM (United States))

    1993-01-01

    Bluestein and Unruh have discussed the advantages of using a portable doppler radar to map the wind field in tornadoes. during the spring of 1991 a storm-intercept team from the University of Oklahoma (OU) collected data near five supercell tornadoes in Oklahoma and Kansas. Details about the 1-W, 3-cm, 5-deg half-power beamwidth, CW/FM-CW Doppler radar we used and the methods of data collection and analysis are found in Bluestein and Unruh and Bluestein et al. Using the portable radar, we approximately doubled in only one year the number of tornado spectra that had been collected over a period of almost 20 years by NSSL's fixed-site Doppler radar. In this paper we will compare observed tornado wind spectra with simulated wind spectra (Zmic and Doviak 1975) in order to learn more about tornado structure.

  16. New blind mobility aid devices based on the ultrasonic Doppler effect.

    Science.gov (United States)

    Bitjoka, L; Pourcelot, L

    1999-09-01

    An original approach to electronic blind mobility aid combined with ultrasonic wave processing and spatial hearing has allowed the design of new blind mobility aid devices. These devices convert inaudible ultrasound echoes into audible sound via the Doppler effect, preserving even slight modification of the high frequency wave, so as to provide the user with higher acuity information regarding his movement, as well as object movement and their spatial location.

  17. The rotation of the Sun: Observations at Stanford. [using the Doppler effect

    Science.gov (United States)

    Scherrer, J. M.; Wilcox, J. M.; Svalgaard, L.

    1980-01-01

    Daily observations of the photospheric rotation rate using the Doppler effect made at the Stanford Solar Observatory since May 1976 are analyzed. Results show that these observations show no daily or long period variations in the rotation rate that exceed the observational error of about one percent. The average rotation rate is the same as that of the sunspot and the large-scale magnetic field structures.

  18. An old experiment revisited: the Doppler effect in a ripple tank

    Science.gov (United States)

    D'Anna, M.; Corridoni, T.

    2016-07-01

    Studying waves on a water surface, in this paper we present an approach to the Doppler effect that enables students to not only perceive it qualitatively, but also to construct experimentally the well known quantitative relations, which are usually introduced in a rather formal way. The interpretation of these relations is then obtained and discussed exploiting space-time diagrams, whose role is emphasized especially in view of extending this approach to phenomena involving light.

  19. Synthetic Lorentz force in classical atomic gases via Doppler effect and radiation pressure

    CERN Document Server

    Dubček, T; Jukić, D; Aumiler, D; Ban, T; Buljan, H

    2014-01-01

    We theoretically predict a novel type of synthetic Lorentz force for classical (cold) atomic gases, which is based on the Doppler effect and radiation pressure. A fairly uniform and strong force can be constructed for gases in macroscopic volumes of several cubic millimeters and more. This opens the possibility to mimic classical charged gases in magnetic fields, such as those in a tokamak, in cold atom experiments.

  20. Acute radiation effects on cutaneous microvasculature: evaluation with a laser Doppler perfusion monitor

    Energy Technology Data Exchange (ETDEWEB)

    Amols, H.I.; Goffman, T.E.; Komaki, R.; Cox, J.D.

    1988-11-01

    Laser Doppler perfusion monitoring is a noninvasive technique for measuring blood flow in epidermal microvasculature that makes use of the frequency shift of light reflected from red blood cells. Measurements in patients undergoing radiation therapy show increases in blood flow of ten to 25 times baseline at doses above 50 Gy, and increases are observed with doses as low as 2 Gy. Follow-up measurements show rapid decreases in flow levels after completion of therapy, but levels remain elevated even at 1 year.

  1. Resolution and Micro-Doppler Effect in Bi-ISAR System (in English

    Directory of Open Access Journals (Sweden)

    Deng Dong-hu

    2013-06-01

    Full Text Available Compared to the monostatic radar, bistatic radar has many special characteristics because of its spatial complexity. Bistatic Inverse Synthetic Aperture Radar (Bi-ISAR can be employed as a radar imaging tool for obtaining non-cooperative target images. In this study, we first analyze the range and azimuth resolution of a Bi-ISAR system. To analyze this azimuth resolution and its spatial-variety characteristic, a definition called con-Doppler bandwidth is introduced, which helps overcome the difficulty of the target’s viewing angle diversity calculation. Then, a detailed investigation is conducted to study the micro-Doppler effect caused by the vibration and the rotation of the target in the Bi-ISAR system. By comparing the difference in the micro-Doppler effect between the Bi-ISAR system and the Mono-ISAR system, we modify the extended Hough transform to extract the real micro-motion features of the targets. Finally, we provide some simulation results to validate the theoretical derivation and to illustrate the effectiveness of the proposed method.

  2. [Doppler effect on width of characteristic line in plasma induced by pulsed laser ablating Al].

    Science.gov (United States)

    Song, Yi-Zhong; He, An-Zhi

    2005-05-01

    Aluminum (Al) plasma was induced with a pulsed Nd: YAG laser beam ablating Al target in Ar. Time-resolved information of the plasma radiation was taken with time-resolved technique, and the spectra of the radiation were recorded with an optical multi-path analyzer (OMA III ), whereupon, time-resolved spectra of the plasma radiation induced by pulsed laser were acquired. Based on the experiment data, Al resonant double lines, Al I 396.15 nm, Al I 394.40 nm, were respectively fitted with Lorentz, Gauss and their linear integrated function (abbr. Integrated function), whereupon, Lorentz and Gauss elements were separated from the experiment data profile curve. By contrasting Lorentz with Gauss curve separated, it was found that the experiment curve mainly consisted of Lorentz element, a with little Gauss. By contrasting Lorentz with Integrated fitting curve for experiment data, a visual picture of the characteristic lines broadened by Doppler effect was exhibited. According to the visual picture, the increase of full half-high width of the characteristic line broadened by Doppler effect was estimated. It was about 2 x 10(-)3 -8 x 10(-3) nm, approximating the theoretical value 6.7 x 10(-)3 nm. As a result, Doppler effect on the width of characteristic lines in the plasma could be reasonably explained by curve fitting analysis and theoretical calculation.

  3. [Laser Doppler flowmetry in newborn infants with low birth weight. The effect of differences in humidity on peripheral circulation].

    Science.gov (United States)

    Hanssler, L; Roll, C; Breukmann, H

    1992-01-01

    In a group of 10 low birth weight infants we measured skin temperature using infrared thermography and laser Doppler flow in central and peripheral regions of the body. After elevation of incubator humidity from 40 to 80% skin temperature of the foot rose significantly (p less than 0.01). At the same time there was a significant increase (p less than 0.05) of laser Doppler flow. Temperature and laser Doppler flow in the area of the abdomen did not show significant changes. Low birth weight infants are able to regulate peripheral blood flow after changes of ambient humidity. With the method of laser Doppler flowmetry thermoregulatory responses in the microvascular bed can be measured in these infants.

  4. Experimental and biological variation of three-dimensional transcranial Doppler measurements

    DEFF Research Database (Denmark)

    Thomsen, L L; Iversen, Helle Klingenberg

    1993-01-01

    A new transcranial Doppler system (3-D Transscan, Eden Medizinische Elektronik) was evaluated in relation to sex, age, intersubject, interobserver, side-to-side, and day-to-day variation. Fifty-eight healthy volunteers participated (aged 18-80 yr). Mean velocity was higher in females than in male...

  5. Exponential Decay in Windblown Radar Ground Clutter Doppler Spectra: Multifrequency Measurements and Model.

    Science.gov (United States)

    2007-11-02

    Reese Straw, William Dustin, Carol Bernhard, Joanne Bradley and Bob Graham-Munn. The manuscript was skillfully prepared by Pat DeCuir and kindly and...spreading of Ot° rees in Doppler, i.e., j^Krees’ Pto^dv = °trees- so Krees’ Ptot^ represents the normalized density of windblown tree clutter power

  6. Associations between abnormal ultrasound color Doppler measures and tendon pain symptoms in badminton players during a season

    DEFF Research Database (Denmark)

    Boesen, Anders Ploug; Boesen, Morten Ilum; Torp-Pedersen, Soren

    2012-01-01

    Color Doppler ultrasound is widely used to examine intratendinous flow in individuals with overuse tendon problems, but the association between color Doppler and pain is still unclear.......Color Doppler ultrasound is widely used to examine intratendinous flow in individuals with overuse tendon problems, but the association between color Doppler and pain is still unclear....

  7. Refractive index effects on the scatter volume location and Doppler velocity estimates of ionospheric HF backscatter echoes

    Directory of Open Access Journals (Sweden)

    P. V. Ponomarenko

    2009-11-01

    Full Text Available Ionospheric E×B plasma drift velocities derived from the Super Dual Auroral Radar Network (SuperDARN Doppler data exhibit systematically smaller (by 20–30% magnitudes than those measured by the Defence Meteorological Satellites Program (DMSP satellites. A part of the disagreement was previously attributed to the change in the E/B ratio due to the altitude difference between the satellite orbit and the location of the effective scatter volume for the radar signals. Another important factor arises from the free-space propagation assumption used in converting the measured Doppler frequency shift into the line-of-sight velocity. In this work, we have applied numerical ray-tracing to identify the location of the effective scattering volume of the ionosphere and to estimate the ionospheric refractive index. The simulations show that the major contribution to the radar echoes should be provided by the Pedersen and/or escaping rays that are scattered in the vicinity of the F-layer maximum. This conclusion is supported by a statistical analysis of the experimental elevation angle data, which have a signature consistent with scattering from the F-region peak. A detailed analysis of the simulations has allowed us to propose a simple velocity correction procedure, which we have successfully tested against the SuperDARN/DMSP comparison data set.

  8. Particle Filter Based Fault-tolerant ROV Navigation using Hydro-acoustic Position and Doppler Velocity Measurements

    DEFF Research Database (Denmark)

    Zhao, Bo; Blanke, Mogens; Skjetne, Roger

    2012-01-01

    This paper presents a fault tolerant navigation system for a remotely operated vehicle (ROV). The navigation system uses hydro-acoustic position reference (HPR) and Doppler velocity log (DVL) measurements to achieve an integrated navigation. The fault tolerant functionality is based on a modied...... particle lter. This particle lter is able to run in an asynchronous manner to accommodate the measurement drop out problem, and it overcomes the measurement outliers by switching observation models. Simulations with experimental data show that this fault tolerant navigation system can accurately estimate...

  9. Acoustic Doppler Current Profiler Measurements in the Tailrace at John Day Dam

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Chris B.; Dibrani, Berhon; Serkowski, John A.; Richmond, Marshall C.; Titzler, P. Scott; Dennis, Gary W.

    2006-01-30

    Acoustic Doppler current profilers (ADCPs) were used to measure water velocities in the tailrace at John Day Dam over a two-week period in February 2005. Data were collected by the Pacific Northwest National Laboratory for the Hydraulic Design Section, Portland District, U.S. Army Corps of Engineers (USACE). The objective of this project was therefore to collect field measurements of water velocities in the near-field draft tube exit zone as well as the far-field tailrace to be used for improving these models. Field data were collected during the project using five separate ADCPs. Mobile ADCP data were collected using two ADCPs mounted on two separate boats. Data were collected by either holding the boat on-station at pre-defined locations for approximately 10 minutes or in moving transect mode when the boat would move over large distances during the data collection. Results from the mobile ADCP survey indicated a complex hydrodynamic flow field in the tailrace downstream of John Day Dam. A large gyre was noted between the skeleton section of the powerhouse and non-spilling portion of the spillway. Downstream of the spillway, the spillway flow is constrained against the navigation lock guide wall, and large velocities were noted in this region. Downstream of the guide wall, velocities decreased as the spillway jet dispersed. Near the tailrace island, the flow split was measured to be approximately equal on Day 2 (25.4 kcfs spillway/123 kcfs total). However, approximately 60% of the flow passed along the south shore of the island on Day 1 (15.0 kcfs spillway/150 kcfs total). At a distance of 9000 ft downstream of the dam, flows had equalized laterally and were generally uniform over the cross section. The collection of water velocities near the draft tube exit of an operating turbine unit is not routine, and equipment capable of measuring 3D water velocities in these zones are at the forefront of hydraulic measurement technology. Although the feasibility of

  10. Laser Doppler velocimeter measurements and laser sheet imaging in an annular combustor model. M.S. Thesis, Final Report

    Science.gov (United States)

    Dwenger, Richard Dale

    1995-01-01

    An experimental study was conducted in annular combustor model to provide a better understanding of the flowfield. Combustor model configurations consisting of primary jets only, annular jets only, and a combination of annular and primary jets were investigated. The purpose of this research was to provide a better understanding of combustor flows and to provide a data base for comparison with computational models. The first part of this research used a laser Doppler velocimeter to measure mean velocity and statistically calculate root-mean-square velocity in two coordinate directions. From this data, one Reynolds shear stress component and a two-dimensional turbulent kinetic energy term was determined. Major features of the flowfield included recirculating flow, primary and annular jet interaction, and high turbulence. The most pronounced result from this data was the effect the primary jets had on the flowfield. The primary jets were seen to reduce flow asymmetries, create larger recirculation zones, and higher turbulence levels. The second part of this research used a technique called marker nephelometry to provide mean concentration values in the combustor. Results showed the flow to be very turbulent and unsteady. All configurations investigated were highly sensitive to alignment of the primary and annular jets in the model and inlet conditions. Any imbalance between primary jets or misalignment of the annular jets caused severe flow asymmetries.

  11. Wayside Bearing Fault Diagnosis Based on a Data-Driven Doppler Effect Eliminator and Transient Model Analysis

    Directory of Open Access Journals (Sweden)

    Fang Liu

    2014-05-01

    Full Text Available A fault diagnosis strategy based on the wayside acoustic monitoring technique is investigated for locomotive bearing fault diagnosis. Inspired by the transient modeling analysis method based on correlation filtering analysis, a so-called Parametric-Mother-Doppler-Wavelet (PMDW is constructed with six parameters, including a center characteristic frequency and five kinematic model parameters. A Doppler effect eliminator containing a PMDW generator, a correlation filtering analysis module, and a signal resampler is invented to eliminate the Doppler effect embedded in the acoustic signal of the recorded bearing. Through the Doppler effect eliminator, the five kinematic model parameters can be identified based on the signal itself. Then, the signal resampler is applied to eliminate the Doppler effect using the identified parameters. With the ability to detect early bearing faults, the transient model analysis method is employed to detect localized bearing faults after the embedded Doppler effect is eliminated. The effectiveness of the proposed fault diagnosis strategy is verified via simulation studies and applications to diagnose locomotive roller bearing defects.

  12. Wayside bearing fault diagnosis based on a data-driven Doppler effect eliminator and transient model analysis.

    Science.gov (United States)

    Liu, Fang; Shen, Changqing; He, Qingbo; Zhang, Ao; Liu, Yongbin; Kong, Fanrang

    2014-05-05

    A fault diagnosis strategy based on the wayside acoustic monitoring technique is investigated for locomotive bearing fault diagnosis. Inspired by the transient modeling analysis method based on correlation filtering analysis, a so-called Parametric-Mother-Doppler-Wavelet (PMDW) is constructed with six parameters, including a center characteristic frequency and five kinematic model parameters. A Doppler effect eliminator containing a PMDW generator, a correlation filtering analysis module, and a signal resampler is invented to eliminate the Doppler effect embedded in the acoustic signal of the recorded bearing. Through the Doppler effect eliminator, the five kinematic model parameters can be identified based on the signal itself. Then, the signal resampler is applied to eliminate the Doppler effect using the identified parameters. With the ability to detect early bearing faults, the transient model analysis method is employed to detect localized bearing faults after the embedded Doppler effect is eliminated. The effectiveness of the proposed fault diagnosis strategy is verified via simulation studies and applications to diagnose locomotive roller bearing defects.

  13. Effect of fluctuations in Doppler width on the center of strong absorption lines

    Science.gov (United States)

    Silant'ev, N. A.; Alekseeva, G. A.; Novikov, V. V.

    2011-12-01

    Stochastic temperatures and turbulence are characterized by average velocities u th and ≡ u 0 and fluctuations {u'_{th}} and u' ( = 0). Thus, the Doppler width of a line also has a fluctuating component Δ {λ '_D} . Observed spectra correspond to the radiative flux averaged over time and over a star's surface, . Usually, only the average velocities u th and u 0 are taken into account in photospheric models and these yield the Doppler width Δ λ_D^{(0)} of a line in the customary way. The fluctuations Δ {λ '_D} mean that near a line center the average absorption coefficient is larger than the usual αλ, which depends only on the average velocities u th and u 0. This enhances the absorption line near the center and is not explained by the photospheric models. This new statistical effect depends on the wavelength of the line. A comparison of observed lines with model profiles yields an estimate for the average level of fluctuations in the Doppler width, η = {{{leftright|} rightrangle }} left/ {{Δ λ_D^{(0)}}} right.} , which characterizes the average stochasticity of a photosphere and is important for understanding the physics of photospheres. The depths of lines in synthetic spectra of stars are often greater than the observed values. The observed disagreement between the theoretical and actually observed depths of lines can be corrected by introducing an additional parameter, the fluctuation level η. Then it is possible to obtain estimates of η for a number of stars.

  14. Coherent Doppler Lidar for Wind and Cloud Measurements on Venus from an Orbiting or Floating/Flying Platform

    Science.gov (United States)

    Singh, Upendra; Limaye, Sanjay; Emmitt, George; Kavaya, Michael; Yu, Jirong; Petros, Mulugeta

    Abstract Given the presence of clouds and haze in the upper portion of the Venus atmosphere, it is reasonable to consider a Doppler wind lidar (DWL) for making remote measurements of the 3D winds within the tops of clouds and the overlying haze layer. Assuming an orbit altitude of 250 km and cloud tops at 60km (within the “upper cloud layer”), an initial performance assessment of an orbiting DWL was made using a numerical instrument and atmospheres model developed for both Earth and Mars. The threshold aerosol backscatter for 2-micron was taken to be 1.0*10-6 msr-1. This backscatter value is between 1 and 2 orders of magnitude lower than that expected for clouds with optical depths greater than 2.0. Cloud composition was assumed to be mixture of dust, frozen CO2 and sulfuric acid. Based on the DWL assessment and simulation, it is reasonable to expect vertical profiles of the 3D wind speed with 1 km vertical resolution and horizontal spacing of 25 km to several 100 kms depending upon the desired integration times. These profiles would begin somewhere just below the tops of the highest clouds and extend into the overlying haze layer to some TBD height. Getting multiple layers of cloud returns is also possible with no negative impact on velocity measurement accuracy. With support from the NASA Laser Risk Reduction Program (LRRP) and Instrument Incubator Program (IIP), NASA Langley Research Center has developed a state-of-the-art compact lidar transceiver for a pulsed 2-micron coherent Doppler lidar system for wind measurement in the Earth’s atmosphere [1-3]. The knowledge and expertise for developing coherent Doppler wind lidar technologies and techniques for Earth related mission at NASA LaRC is being leveraged to develop an appropriate system suitable for wind measurement around Venus. We are considering a fiber laser based lidar system of high efficiency and smaller size and advancing the technology level to meet the requirements for DWL system for Venus from

  15. Surface Charge Measurement of SonoVue, Definity and Optison: A Comparison of Laser Doppler Electrophoresis and Micro-Electrophoresis.

    Science.gov (United States)

    Ja'afar, Fairuzeta; Leow, Chee Hau; Garbin, Valeria; Sennoga, Charles A; Tang, Meng-Xing; Seddon, John M

    2015-11-01

    Microbubble (MB) contrast-enhanced ultrasonography is a promising tool for targeted molecular imaging. It is important to determine the MB surface charge accurately as it affects the MB interactions with cell membranes. In this article, we report the surface charge measurement of SonoVue, Definity and Optison. We compare the performance of the widely used laser Doppler electrophoresis with an in-house micro-electrophoresis system. By optically tracking MB electrophoretic velocity in a microchannel, we determined the zeta potentials of MB samples. Using micro-electrophoresis, we obtained zeta potential values for SonoVue, Definity and Optison of -28.3, -4.2 and -9.5 mV, with relative standard deviations of 5%, 48% and 8%, respectively. In comparison, laser Doppler electrophoresis gave -8.7, +0.7 and +15.8 mV with relative standard deviations of 330%, 29,000% and 130%, respectively. We found that the reliability of laser Doppler electrophoresis is compromised by MB buoyancy. Micro-electrophoresis determined zeta potential values with a 10-fold improvement in relative standard deviation.

  16. Laser Doppler flowmetry for bone blood flow measurements: helium-neon laser light attenuation and depth of perfusion assessment.

    Science.gov (United States)

    Nötzli, H P; Swiontkowski, M F; Thaxter, S T; Carpenter, G K; Wyatt, R

    1989-01-01

    Laser Doppler flowmetry (LDF) has been successfully used in clinical and experimental settings to evaluate bone perfusion but unanswered questions regarding its capabilities and limitations still remain. This study was undertaken to determine absorption of He-Ne laser light (632.8 nm) and maximum depth for flow assessment (threshold thickness) under optimal conditions in bone. Light transmittance in bovine bone samples of femora and tibia was measured after each step of grinding and depth of penetration calculated. The threshold thickness was obtained by placing the same samples in a flow chamber where a solution of 2% latex circulated beneath; flow was detected by a laser Doppler probe resting on top of the sample. The results showed a significantly higher depth of penetration for trabecular than for cortical bone. A regression analysis showed a high correlation between the inorganic fraction of the bone and the depth of penetration. The maximum depth at which the laser Doppler probe can evaluate flow in bone conditions was found to be 2.9 +/- 0.2 mm in cortical bone, 3.5 +/- 0.3 mm in bone covered by 1 mm cartilage and 3.5 +/- 0.2 mm in trabecular bone. The study showed the limitations of LDF in bone and their correlations to various bone properties.

  17. Implementing a wind measurement Doppler Lidar based on a molecular iodine filter to monitor the atmospheric wind field over Beijing

    Science.gov (United States)

    Du, Li-fang; Yang, Guo-tao; Wang, Ji-hong; Yue, Chuan; Chen, Lin-xiang

    2017-02-01

    A wind measurement Doppler Lidar system was developed, in which injection seeded laser was used to generate narrow linewidth laser pulse. Frequency stabilization was achieved through absorption of iodine molecules. Commands that control the instrumental system were based on the PID algorithm and coded using VB language. The frequency of the seed laser was locked to iodine molecular absorption line 1109 which is close to the upper edge of the absorption range,with long-time (>4 h) frequency-locking accuracy being ≤0.5 MHz and long-time frequency stability being 3.55×10-9. Design the continuous light velocity measuring system, which concluded the cure about doppler frequency shift and actual speed of chopped wave plate, the velocity error is less than 0.4 m/s. The experiment showed that the stabilized frequency of the seed laser was different from the transmission frequency of the Lidar. And such frequency deviation is known as Chirp of the laser pulse. The real-time measured frequency difference of the continuous and pulsed lights was about 10 MHz, long-time stability deviation was around 5 MHz. When the temporal and spatial resolutions were respectively set to 100 s and 96 m, the wind velocity measurement error of the horizontal wind field at the attitude of 15-35 km was within ±5 m/s, the results showed that the wind measurement Doppler Lidar implemented in Yanqing, Beijing was capable of continuously detecting in the middle and low atmospheric wind field at nighttime. With further development of this technique, system measurement error could be lowered, and long-run routine observations are promising.

  18. Improved algorithms for the calculation of resolved resonance cross sections with applications to the structural Doppler effect in fast reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, R N; Toppel, B J; Henryson, H II

    1980-10-01

    Motivated by a need for an economical yet rigorous tool which can address the computation of the structural material Doppler effect, an extremely efficient improved RABANL capability has been developed utilizing the fact that the Doppler broadened line shape functions become essentially identical to the natural line shape functions or Lorentzian limits beyond about 100 Doppler widths from the resonance energy, or when the natural width exceeds about 200 Doppler widths. The computational efficiency has been further enhanced by preprocessing or screening a significant number of selected resonances during library preparation into composition and temperature independent smooth background cross sections. The resonances which are suitable for such pre-processing are those which are either very broad or those which are very weak. The former contribute very little to the Doppler effect and their self-shielding effect can readily be averaged into slowly varying background cross section data, while the latter contribute very little to either the Doppler or to self-shielding effects. To illustrate the accuracy and efficiency of the improved RABANL algorithms and resonance screening techniques, calculations have been performed for two systems, the first with a composition typical of the STF converter region and the second typical of an LMFBR core composition. Excellent agreement has been found for RABANL compared to the reference Monte Carlo solution obtained using the code VIM, and improved results have also been obtained for the narrow resonance approximation in the ultra-fine-group option of MC/sup 2/-2.

  19. Doppler-shifting effects on frequency spectra of gravity waves observed near the summer mesopause at high latitude

    Science.gov (United States)

    Fritts, David C.; Wang, Ding-Yi

    1991-01-01

    Results are presented of radar observations of horizontal and vertical velocities near the summer mesopause at Poker Flat (Alaska), showing that the observed vertical velocity spectra were influenced strongly by Doppler-shifting effects. The horizontal velocity spectra, however, were relatively insensitive to horizontal wind speed. The observed spectra are compared with predicted spectra for various models of the intrinsic motion spectrum and degrees of Doppler shifting.

  20. Optical Doppler shift with structured light

    OpenAIRE

    2011-01-01

    When a light beam with a transverse spatially varying phase is considered for optical remote sensing, in addition to the usual longitudinal Doppler frequency shift of the returned signal induced by the motion of the scatter along the beam axis, a new transversal Doppler shift appears associated to the motion of the scatterer in the plane perpendicular to the beam axis. We discuss here how this new effect can be used to enhance the current capabilities of optical measurement system...

  1. Method of radial velocities for the estimation of aircraft wake vortex parameters from data measured by coherent Doppler lidar.

    Science.gov (United States)

    Smalikho, I N; Banakh, V A; Holzäpfel, F; Rahm, S

    2015-09-21

    The method of radial velocities (RV) is applied to estimate aircraft wake vortex parameters from measurements conducted with pulsed coherent Doppler lidar (PCDL). Operations of the Stream Line lidar and the 2-µm PCDL are simulated numerically to analyze the accuracy of the estimated wake vortex parameters with the RV method. The RV method is also used to estimate wake vortex trajectories and circulation from lidar measurements at Tomsk and Munich airports. The method of velocity envelopes and the RV method are compared employing data gathered with the 2-µm PCDL. The domain of applicability of the RV method is determined.

  2. Calculation of aerosol backscatter from airborne continuous wave focused CO sub 2 Doppler lidar measurements. 1. Algorithm description

    Energy Technology Data Exchange (ETDEWEB)

    Rothermel, J. (NASA Marshall Space Flight Center, Huntsville, AL (USA)); Bowdle, D.A. (Univ. of Alabama, Huntsville (USA)); Vaughan, J.M.; Brown, D.W. (Royal Signals and Radar Establishment, Worcestershire (England)); Woodfield, A.A. (Royal Aircraft Establishment, Bedfordshire (England))

    1991-03-20

    Since 1981 the Royal Signals and Radar Establishment and the Royal Aircraft Establishment, United Kingdom, have made vertical and horizontal sounding measurements of aerosol backscatter coefficients at 10.6 {mu}m using an airborne continuous wave focused CO{sub 2} Doppler lidar, the Laser True Airspeed System (LATAS). The heterodyne signal from the LATAS detector is spectrally analyzed. Then, in conjunction with aircraft flight parameters, the data are processed in a six-stage computer algorithm: Set search window, search for peak signal, test peak signal, measure total signal, calculate signal-to-noise ratio (SNR), and calculate backscatter coefficient.

  3. Effects of sevoflurane with and without nitrous oxide on human cerebral circulation. Transcranial Doppler study.

    Science.gov (United States)

    Cho, S; Fujigaki, T; Uchiyama, Y; Fukusaki, M; Shibata, O; Sumikawa, K

    1996-10-01

    This study was designed to evaluate the effects of sevoflurane with and without nitrous oxide on human middle cerebral artery (MCA) flow velocity, cerebrovascular carbon dioxide reactivity, and autoregulation compared with the awake state using transcranial Doppler ultrasonography. In 14 patients, the time-mean middle cerebral artery flow velocity (Vmca) was measured when the end-tidal carbon dioxide level was approximately 30, 40, and 50 mmHg under the following conditions: (1) awake; (2) with 2% (1.2 MAC) sevoflurane; and (3) with 1.2 MAC sevoflurane-60% nitrous oxide. In six other patients, the cerebrovascular autoregulation during anesthesia was determined using intravenous phenylephrine to increase blood pressure. Sevoflurane (1.2 MAC) significantly decreased Vmca compared with the awake value at each level of end-tidal carbon dioxide, whereas 1.2 MAC sevoflurane-60% nitrous oxide did not exert significant influence. The Vmca in normocapnic patients decreased from 69 cm/s to 55 cm/s with 1.2 MAC sevoflurane and then increased to 70 cm/s when nitrous oxide was added. Sevoflurane (1.2 MAC) with and without 60% nitrous oxide had a negligible effect on cerebrovascular carbon dioxide reactivity. A phenylephrine-induced increase of mean arterial pressure did not influence Vmca during anesthesia. Sevoflurane (1.2 MAC) reduced Vmca compared with the awake condition, whereas the addition of nitrous oxide caused Vmca to increase toward the values obtained in the awake condition. The cerebrovascular carbon dioxide reactivity and autoregulation were well maintained during 1.2 MAC sevoflurane with and without 60% nitrous oxide.

  4. ACCURACY OF OSCILLOMETRIC (PETMAP™ AND DOPPLER METHODS TO INDIRECT MEASUREMENT OF BLOOD PRESSURE IN LAMBS

    Directory of Open Access Journals (Sweden)

    Carla Maria Vela Ulian

    2016-10-01

    Full Text Available Neonatal physiology has peculiarities inherent to the age group. The objective of this study was to monitor the systemic arterial pressure in lambs during neonatal period. We used 20 Ile de France lambs, from birth and at 7, 14, 21, 28 and 35 days of life. The following parameters were analyzed: heart rate (HR, systolic (SBP, diastolic (DBP, and average blood pressure (ABP by oscillometric method petMAP™, and SBP with Doppler. Invasive pressure validated indirect methods with the average 101.52 ± 12.04 mmHg. The averages with petMAP™ were as follows: HR (156.38 ± 37.46 bpm; DBP (63.80 ± 11.14 mmHg; ABP (81.58 ± 11.83 mmHg; SBP (112.48 ± 15.68 mmHg and SBP by Dobler (90.27 ± 12.11 mmHg. There was significant difference in HR and blood pressure among the moments. Indirect methods differ between each other in 12.30 mmHg (overestimation   of 11%. Comparing with the invasive methods, both overestimated values of 4% and 16% in   PAS, respectively, for Doppler and petMAP™. The results showed that the Doppler method has established a good relationship with the invasive one being useful for gauging the SBP. The oscillometric method requires larger studies to be used in small ruminants. Keywords: Doppler; lamb; neonatal period; oscillometric; systemic blood pressure.

  5. Laser Doppler measurement of relative blood velocity in the human optic nerve head.

    Science.gov (United States)

    Riva, C E; Grunwald, J E; Sinclair, S H

    1982-02-01

    The Doppler shift frequency spectrum (DSFS) of laser light scattered from red blood cells (RBCs) moving in the microcirculation of the optic nerve head has been recorded in normal volunteers by means of a fundus camera laser Doppler velocimeter. The width of the DSFS, which varies in proportion to the speed of the RBCs, has been characterized by a parameter alpha. With the use of a model for the scattering of light by tissue and RBCs and for the RBC velocity distribution, values of alpha recorded at normal intraocular pressure (IOP) suggest that the RBCs that contribute to the Doppler signal are flowing in capillaries. The parameter alpha was found to vary markedly with the IOP and with the phase of the ocular pressure pulse at elevated IOP. The return of the speed of RBCs toward normal, which is observed after a step increase of IOP above normal and after a step decrease below normal, has been attributed to an autoregulatory response of the optic nerve circulation.

  6. Transcranial Doppler blood flow measurement during cesarean section in two patients with cerebral vascular disease.

    Science.gov (United States)

    Smiley, R M; Ridley, D M; Hartmann, A; Ciliberto, C F; Baxi, L

    2002-07-01

    We present two cases of neurovascular disease in pregnancy in which transcranial Doppler was used to assess the status of the cerebral circulation during cesarean section under regional anesthesia. One woman had been found to have moyamoya disease, following a series of transient ischemic attacks during her first pregnancy, which ended in spontaneous abortion. On this occasion she was delivered by cesarean section under slowly-induced epidural anesthesia, using ephedrine to maintain the blood pressure, and transcranial Doppler revealed no change in signal in her left middle cerebral artery. Both mother and baby had an uneventful post natal course. The second case involved a primiparous woman with a large arteriovenous malformation that had been detected following generalized seizures, which were treated with valproic acid. Her cesarean section was conducted under spinal anesthesia, and her blood pressure maintained with ephedrine. Again transcranial Doppler revealed no change in signal in her middle cerebral artery during the procedure. We believe this is a potentially useful technique to monitor the cerebral circulation intraoperatively in the presence of cerebrovascular disease.

  7. Anisotropic ultrafast dissociation probed by the Doppler effect in resonant photoemission from CF4.

    Science.gov (United States)

    Ueda, K; Kitajima, M; De Fanis, A; Furuta, T; Shindo, H; Tanaka, H; Okada, K; Feifel, R; Sorensen, S L; Yoshida, H; Senba, Y

    2003-06-13

    The resonant Auger spectrum from the decay of F 1s-excited CF4 is measured. Several lines exhibit a nondispersive kinetic energy as the exciting photon energy is tuned through the resonance region. The F 1s(-1) atomiclike Auger line is split into two components due to the emission of Auger electrons by a fragment in motion, when electron emission is observed along the polarization vector of the light. This Doppler splitting is direct evidence that the core excitation leads to T(d)-->C(3v) symmetry lowering, by elongation of a specific C-F bond preferentially aligned along the polarization vector of the incident photon.

  8. Effects of permanent magnets on resting skin blood perfusion in healthy persons assessed by laser Doppler flowmetry and imaging.

    Science.gov (United States)

    Mayrovitz, H N; Groseclose, E E; Markov, M; Pilla, A A

    2001-10-01

    Effects on skin blood perfusion of permanent ceramic magnets [0.1 T (1000 G) surface field], individually (disk shaped, 4 cm diameter x 1 cm thick) or in the form of a 11 x 7 in pad ( approximately 28 x 17.8 cm) with an array of 16 rectangular magnets (4.5 x 2.2 cm), were investigated in 16 female volunteers (27.4 +/- 1.7 years, range 21-48 years) using three separate protocols. In protocol A, a disk magnet was placed on the palmar surface of the hand in contact with the thenar eminence (n = 5). In protocol B, the magnet was placed on the hand dorsum overlying the thenar eminence (n = 5). In protocol C, the entire palm and fingers rested on the magnetic pad (n = 6). Magnets were in place for 36 min on one hand, and a sham was in place on the other hand. Blood perfusion was measured on the middle finger dorsum by laser Doppler flowmetry (LDF) and on the index finger by laser Doppler imaging (LDI). Perfusion measurements were simultaneously taken in sham and magnet exposed hands, before and during the entire magnet exposure interval. Magnetic field effects were tested by comparing skin blood perfusion sequences in magnet and sham exposed regions. Results showed no significant changes in either LDF or LDI perfusion at magnet or sham sites during exposure, nor were there any significant differences between sham and magnet sites for any protocol. Measurements of skin temperature at the LDF measurement sites also showed no significant change. It is concluded that in the healthy subjects studied with normal, unstressed circulation, magnets of the type and for the duration used, showed no detectible effect on skin blood perfusion in the anatomical area studied.

  9. Doppler effect reduction based on time-domain interpolation resampling for wayside acoustic defective bearing detector system

    Science.gov (United States)

    Liu, Fang; He, Qingbo; Kong, Fanrang; Liu, Yongbin

    2014-06-01

    In the wayside Acoustic Defective Bearing Detector (ADBD) system, the recorded acoustic signal will be severely distorted by the Doppler effect because of the high moving speed of the railway vehicle, which is a barrier that would badly reduce the effectiveness of online defect detection. This paper proposes a simple and effective method, called time-domain interpolation resampling (TIR), to remove the Doppler effect embedded in the acoustic signal. The TIR is conducted in three steps. First, the time vector for resampling is calculated according to the kinematic analysis. Second, the amplitude of the distorted signal is demodulated. Third, the distorted signal is re-sampled using spline interpolation. In this method, both the spectrum structure and the amplitudes of the distorted signal can be restored. The effectiveness of TIR is verified by means of simulation studies and train roller bearing experiments with various types of defects. It is also compared to an existing Doppler effect reduction method that is based on the instantaneous frequency estimation using Hilbert transform. Results indicate that the proposed TIR method has the superior performance in removing the Doppler effect, and can be well implemented to Doppler effect reduction for the ADBD system.

  10. Duplex/colour Doppler sonography: measurement of changes in hepatic arterial haemodynamics following intra-arterial angiotensin II infusion.

    Science.gov (United States)

    Leen, E; Angerson, W J; Warren, H W; Goldberg, J A; Sutherland, G R; Cooke, T G; McArdle, C S

    1993-06-01

    Angiotensin II (AT-II) has been used to target regionally-administered cytotoxic microspheres in patients with intrahepatic tumours. The optimisation of vasoconstrictor targeting requires a knowledge of the blood flow changes induced by agents such as AT-II. We therefore assessed duplex/colour Doppler sonography (DCDS) as a means of evaluating the effects of AT-II infusion on hepatic arterial blood flow (HABF) and arterial resistance in patients with intrahepatic tumours. HABF was measured continuously in nine patients using DCDS before, during and after an infusion of AT-II (15 micrograms in 3 ml of saline over 90 s) via a hepatic artery catheter. In seven patients with less than 30% hepatic replacement by tumour, the baseline level of HABF was 331 +/- 85 ml min-1 (mean +/- s.d.), and this was reduced by 75-80% within 30 s of the start of AT-II infusion. HABF recovered rapidly from the end of the infusion, and increased by up to 20% above the baseline for approximately 2 min. In two patients with greater than 50% hepatic replacement, HABF showed no reduction but rose continuously from the start of AT-II infusion, increasing by a factor of 2-2.5 after 3-4 min. Arterial resistance showed reciprocal changes in all cases. We conclude that DCDS is effective in assessing the temporal changes in hepatic arterial blood flow caused by AT-II. In order to optimise tumour targeting, the injection of microspheres loaded with cytotoxic drugs should be completed before the end of the AT-II infusion. The targeting advantage of AT-II in patients with a high percentage hepatic replacement by tumour should be re-assessed.

  11. Serial measurement of Doppler hepatic hemodynamic parameters for the diagnosis of acute rejection after live donor liver transplantation.

    Science.gov (United States)

    Sugimoto, Hiroyuki; Kato, Koichi; Hirota, Masashi; Takeda, Shin; Kamei, Hideya; Nakamura, Taro; Kiuchi, Tetsuya; Nakao, Akimasa

    2009-09-01

    To elucidate the role of Doppler hepatic hemodynamic parameters as surrogate markers of acute rejection (AR) after live donor liver transplantation (LDLT), serial Doppler measurements were prospectively performed during the first 2 weeks after LDLT to compare the longitudinal hepatic hemodynamic changes between patients with histologically proven AR and patients without histologically proven AR. Forty-six patients that had undergone adult-to-adult LDLT using a right lobe graft were enrolled in this study. The portal venous maximum velocity (PVV; cm/second), portal venous flow volume, hepatic arterial peak systolic velocity, hepatic arterial pulsatility index, hepatic venous maximum velocity, hepatic venous pulsatility index, and splenic arterial pulsatility index were measured. Fourteen patients were diagnosed by biopsy to have clinically relevant AR. Markedly increased PVV was seen soon after surgery and gradually decreased in both patients with clinically relevant AR and patients without clinically relevant AR. This serial change of decreasing PVV was significantly greater in patients with clinically relevant AR (P patients with clinically relevant AR was significantly lower than that in patients without clinically relevant AR (PVV on postoperative day 6: 35.6 +/- 21.3 versus 58.3 +/- 27.1 cm/second, respectively, P = 0.0080). A PVV cutoff value of 20.2 cm/second demonstrated the best accuracy for predicting clinically relevant AR. The sensitivity and specificity for predicting clinically relevant AR were 92.9% and 87.1%, respectively. The area under the curve was 0.94. In conclusion, serial Doppler measurement of hepatic parameters in LDLT is useful for the diagnosis of clinically relevant AR. Clinically relevant AR should therefore be suspected when a marked unexpected decrease in the PVV is observed.

  12. Estimating suspended solids concentrations from backscatter intensity measured by acoustic Doppler current profiler in San Francisco Bay, California

    Science.gov (United States)

    Gartner, J.W.

    2004-01-01

    The estimation of mass concentration of suspended solids is one of the properties needed to understand the characteristics of sediment transport in bays and estuaries. However, useful measurements or estimates of this property are often problematic when employing the usual methods of determination from collected water samples or optical sensors. Analysis of water samples tends to undersample the highly variable character of suspended solids, and optical sensors often become useless from biological fouling in highly productive regions. Acoustic sensors, such as acoustic Doppler current profilers that are now routinely used to measure water velocity, have been shown to hold promise as a means of quantitatively estimating suspended solids from acoustic backscatter intensity, a parameter used in velocity measurement. To further evaluate application of this technique using commercially available instruments, profiles of suspended solids concentrations are estimated from acoustic backscatter intensity recorded by 1200- and 2400-kHz broadband acoustic Doppler current profilers located at two sites in San Francisco Bay, California. ADCP backscatter intensity is calibrated using optical backscatterance data from an instrument located at a depth close to the ADCP transducers. In addition to losses from spherical spreading and water absorption, calculations of acoustic transmission losses account for attenuation from suspended sediment and correction for nonspherical spreading in the near field of the acoustic transducer. Acoustic estimates of suspended solids consisting of cohesive and noncohesive sediments are found to agree within about 8-10% (of the total range of concentration) to those values estimated by a second optical backscatterance sensor located at a depth further from the ADCP transducers. The success of this approach using commercially available Doppler profilers provides promise that this technique might be appropriate and useful under certain conditions in

  13. Reversing the direction of space and inverse Doppler effect in positive refraction index media

    Science.gov (United States)

    Sun, Fei; He, Sailing

    2017-01-01

    A negative refractive index medium, in which all spatial coordinates are reversed (i.e. a left-hand triplet is formed) by a spatial folding transformation, can create many novel electromagnetic phenomena, e.g. backward wave propagation, and inversed Doppler effect (IDE). In this study, we use coordinate rotation transformation to reverse only two spatial coordinates (e.g. x‧ and y‧), while keeping z‧ unchanged. In this case, some novel phenomena, e.g. radiation-direction-reversing illusions and IDE, can be achieved in a free space region wrapped by the proposed shell without any negative refractive index medium, which is easier for experimental realization and future applications.

  14. Comparison of anomalous Doppler resonance effects with molybdenum and graphite limiters on HT-7.

    Science.gov (United States)

    Wang, Y M; Gao, X; Ling, B L; Liu, Y; Zhang, S B; Han, X; Ti, A; Li, E Z

    2012-03-01

    The material of limiter in HT-7 tokamak was changed from graphite to molybdenum in the last experimental campaign. The pitch angle scattering of runaway electrons due to anomalous Doppler resonance effects was observed. The experimental results agree very well with the stable boundary condition expected from the linear resistive theory but only agree with that from the nonlinear evolutionary of runaway-electron distribution theory in low electric field region. The current carried by runaway electrons is the same under different limiter conditions.

  15. Effect of wind turbine micro-Doppler on SAR and GMTI signatures

    Science.gov (United States)

    Bhalla, Rajan; Ling, Hao

    2014-05-01

    In this paper, we present the results of a modeling study to examine the interference effect of microDopplers caused by offshore wind farms on airborne sensors operating in the synthetic aperture radar (SAR) and ground moving target indicator (GMTI) modes. The modeling is carried out by generating CAD instantiations of the dynamic wind turbine and using the high-frequency electromagnetic code Xpatch to perform the scattering calculations. Artifacts in the resulting SAR and GMTI signatures are evaluated for interference with tracking of boats in coastal waters. Results of signal filtering algorithms to reduce the dynamic turbine clutter in both SAR images and GMTI displays are presented.

  16. Manifestation of the rotational Doppler effect by use of an off-axis optical vortex beam.

    Science.gov (United States)

    Basistiy, I V; Slyusar, V V; Soskin, M S; Vasnetsov, M V; Bekshaev, A Ya

    2003-07-15

    We report what is to our knowledge the first all-optical detection of the frequency beats between Gaussian and Laguerre-Gaussian LG0(1) modes in their axial superposition, caused by the rotational Doppler effect. The relation between the observable off-axis optical vortex rotation and the rotational frequency shift of the Laguerre-Gaussian component is ascertained. The results can be used as a physical basis for recognition of Laguerre-Gaussian mode spectra along their orbital angular momenta.

  17. Pulse Wave Doppler Blood Flow Measurement System Based on DSP%基于DSP的脉冲多普勒血流测量系统

    Institute of Scientific and Technical Information of China (English)

    智再新; 陈真诚; 朱健铭

    2013-01-01

    Objective To enhance the glucose detection precision for the diagnosis and treatment of vascular diseases. Methods With DSP as the control unit, a Doppler probe with the transceiver was used to develop a blood flow measurement system. Based on Doppler effect, the system acquired ultrasonic echo signals, and then determined the blood flow rate through Doppler frequency tolerance. Results By acquiring and analyzing echo signals, the system could detect the blood flow with a desired depth. Conclusion The blood flow measurement system, with simplified circuit and enhanced precision, is valuable for the clinical diagnosis of the diabetes and the development of other portable ultrasonic devices.%目的:提高血糖无创检测的精度,以利于诊断和治疗血管疾病.方法:以DSP为控制核心,采用收发一体的多普勒探头,研制一种血流测量系统.该系统基于多普勒效应,采集超声回波信号,通过多普勒频差计算血流速度.结果:通过采集与分析回波信号,该系统可以对预定目标深度的血流进行检测.结论:该系统极大简化了电路规模,提高了检测精度,对糖尿病的临床诊断和其他便携超声仪器的研制都具有重要的实用价值.

  18. [Coronary artery blood flow velocity non-invasively measured using a vessel-tracking pulsed Doppler system].

    Science.gov (United States)

    Tateishi, O; Aizawa, O; Okamura, T; Yoshida, T; Furuhata, H; Seo, Y; Iinuma, K; Shiki, E

    1988-09-01

    A newly-developed noninvasive method was used to measure left coronary blood flow during phantom experiments. Two techniques were used in which: (1) the sample position can always be set in a fluctuating vessel using a wall echo-tracking method with a phase-locked-loop, and (2) the Doppler reference signal was generated separately synchronous with the wall echo signal. These techniques were combined, using a commercially available pulsed Doppler apparatus (SSH-40B: Toshiba). Basic experiments were performed using a blood vessel phantom to verify the validity of these systems. Blood flow velocity in the fluctuating tube could be measured clearly using a vessel-tracking method. The blood flow velocity of the left anterior descending artery was measured in three normal subjects and in seven patients from the third intercostal space along the left sternal border. The velocity pattern was characterized by a crescendo-decrescendo shape in diastole. The peak velocity which appeared in diastole ranged from 19 to 69 cm/sec, with no difference by disease entity. However, in all cases, the blood flow velocity signals were marred by extraneous signals, making it impossible to measure blood flow velocity during systole. Further improvement of the system is mandatory in order to use this flowmeter clinically.

  19. Preparing a dedicated set up for level lifetime measurements using the recoil Doppler shift technique with fast radioactive beams

    Energy Technology Data Exchange (ETDEWEB)

    Hackstein, M.; Fransen, C.; Dewald, A.; Braun, N.; Braunroth, T.; Jolie, J.; Litzinger, J.; Moschner, K.; Reiter, P.; Pfeiffer, M.; Rother, W.; Taprogge, J.; Wendt, A.; Zell, K.O. [IKP, Univ. zu Koeln (Germany); Algora, A.; Doncel, M.; Gadea, A. [Instituto de Fisica Corpuscular (IFIC), Valencia (Spain); Ameil, F.; Boutachkov, P.; Gerl, J.; Grebosz, J.; Guastalla, G.; Habermann, T.; Kurz, N.; Merchan, E.; Nociforo, C.; Pietri, S.; Quitana, B.; Wollersheim, H. [KP II, GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Corsi, A.; Louchar, C.; Obertelli, A. [CEA Saclay (France); Reese, M. [IKP, TU Darmstadt (Germany); Petkov, P. [INRNE, Sofia (Bulgaria)

    2012-07-01

    In this paper we report on the development of a new plunger device especially designed to meet the constraints found at the fragment recoil separator (FRS) at GSI (Darmstadt) in combination with PRESPEC. The aim is to measure level lifetimes in the pico-second range using the recoil distance Doppler shift (RDDS) method of states in exotic nuclei excited via Coulomb excitation or knock-out reactions with radioactive beams at relativistic energies. We also report on the first results obtained from a first commissioning run performed recently with a stable {sup 54}Cr beam.

  20. Recalculation of an artificially released avalanche with SAMOS and validation with measurements from a pulsed Doppler radar

    Directory of Open Access Journals (Sweden)

    R. Sailer

    2002-01-01

    Full Text Available A joint experiment was carried out on 10 February 1999 by the Swiss Federal Institute for Snow and Avalanche Research (SFISAR and the Austrian Institute for Avalanche and Torrent Research (AIATR, of the Federal Office and Re-search Centre for Forests, BFW to measure forces and velocities at the full scale experimental site CRÊTA BESSE in VALLÉE DE LA SIONNE, Canton du Valais, Switzerland. A huge avalanche could be released artificially, which permitted extensive investigations (dynamic measurements, im-provement of measurement systems, simulation model verification, design of protective measures, etc.. The results of the velocity measurements from the dual frequency pulsed Doppler avalanche radar of the AIATR and the recalculation with the numerical simulation model SAMOS are explained in this paper.

  1. Cerebral Blood Flow and Transcranial Doppler Sonography Measurements of CO(2)-Reactivity in Acute Traumatic Brain Injured Patients

    DEFF Research Database (Denmark)

    Reinstrup, Peter; Ryding, Erik Hilmer; Asgeirsson, Bogi;

    2013-01-01

    BACKGROUND: Cerebral blood flow (CBF) measurements are helpful in managing patients with traumatic brain injury (TBI), and testing the cerebrovascular reactivity to CO(2) provides information about injury severity and outcome. The complexity and potential hazard of performing CBF measurements...... limits routine clinical use. An alternative approach is to measure the CBF velocity using bedside, non-invasive, and transcranial Doppler (TCD) sonography. This study was performed to investigate if TCD is a useful alternative to CBF in patients with severe TBI. METHOD: CBF and TCD flow velocity...... measurements and cerebrovascular reactivity to hypocapnia were simultaneously evaluated in 27 patients with acute TBI. Measurements were performed preoperatively during controlled normocapnia and hypocapnia in patients scheduled for hematoma evacuation under general anesthesia. MAIN FINDING AND CONCLUSION...

  2. Color Doppler quantitative measures to predict outcome of biopsies in prostate cancer

    Energy Technology Data Exchange (ETDEWEB)

    Strigari, Lidia; Marsella, Annelisa; Canitano, Stefano; Gomellini, Sara; Arcangeli, Stefano; Genovese, Elisabetta; Saracino, Biancamaria; Petrongari, Maria Grazia; Sentinelli, Steno; Crecco, Marcello; Benassi, Marcello; Arcangeli, Giorgio [Laboratory of Medical Physics and Expert Systems, Regina Elena National Cancer Institute, Rome 00144 (Italy); Radiology Department, Regina Elena National Cancer Institute, Rome 00144 (Italy); Radiotherapy Department, Regina Elena National Cancer Institute, Rome 00144 (Italy); Laboratory of Medical Physics and Expert Systems, Regina Elena National Cancer Center, Rome 00144 (Italy); Radiotherapy Department, Regina Elena National Cancer Center, Rome 00144 (Italy); Pathology Department, Regina Elena National Cancer Center, Rome 00144 (Italy); Radiology Department, Regina Elena National Cancer Center, Rome 00144 (Italy); Laboratory of Medical Physics and Expert Systems, Regina Elena National Cancer Institute, Rome 00144 (Italy); Radiotherapy Department, Regina Elena National Cancer Institute, Rome 00144 (Italy)

    2008-11-15

    Purpose: The aim was to correlate the color Doppler flow activity pre- and postradiotherapy, using transrectal color Doppler ultrasonography (CDUS) and the 2 year positive biopsy rate after radiotherapy in patients with prostate cancer. Methods and materials: Analysis was carried out in 69 out of 160 patients who had undergone treatment with 3D-conformal radiotherapy (3D-CRT) to prostate and seminal vesicles. Patients were randomized to receive 80 Gy in 40 fractions in 8 weeks (arm A) and 62 Gy in 20 fractions in 5 weeks, 4 fractions per week (arm B). Color Doppler flow activity (CDFA) was evaluated calculating the vascularization index (VI), defined as the ratio between the colored and total pixels in the whole and peripheral prostate, delineated by a radiation oncologist on CDUS images, using EcoVasc a home-made software. The difference between the 2 year post- and pre-3D-CRT maximum VI (VI{sub max}), named {Delta}VI{sub max}, was calculated in the whole and peripheral prostate for each patient. Then, {Delta}VI{sub max} and the detected 2 year biopsy outcome were analyzed using the receiver operating characteristics (ROC) technique. Results: The VI{sub max} increased or decreased in patients with positive or negative biopsies, respectively, compared to the value before RT in both arms. The area under the ROC curve for {Delta}VI{sub max} in the whole and peripheral prostate is equal to 0.790 and 0.884, respectively. Conclusion: The {Delta}VI{sub max} index, comparing CDFA at 2 years compared to that before RT, allows the 2 year postradiotherapy positive biopsy rate to be predicted.

  3. Adaptive Model-Based Mine Detection/Localization using Noisy Laser Doppler Vibration Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, E J; Xiang, N; Candy, J V

    2009-04-06

    The acoustic detection of buried mines is hampered by the fact that at the frequencies required for obtaining useful penetration, the energy is quickly absorbed by the ground. A recent approach which avoids this problem, is to excite the ground with a high-level low frequency sound, which excites low frequency resonances in the mine. These resonances cause a low-level vibration on the surface which can be detected by a Laser Doppler Vibrometer. This paper presents a method of quickly and efficiently detecting these vibrations by sensing a change in the statistics of the signal when the mine is present. Results based on real data are shown.

  4. Doppler phantoms for flow measurement of liquids for ultrasond equipment quality control

    OpenAIRE

    Olívia Campos Coiado

    2008-01-01

    Resumo: Neste trabalho é proposto o desenvolvimento de phantoms que permitam o Controle de Qualidade do modo Doppler de funcionamento de equipamentos de ultra-sonografia com tecnologia nacional e preço acessível. O dispositivo é basicamente um circuito hidráulico contendo uma bomba peristáltica, mistura simulando tecido humano, tubos simulando vasos e fluido mimetizador de sangue. Uma bomba peristáltica digital possibilitou a simulação de batimentos cardíacos, com fluxo pulsátil operando com ...

  5. Effect of intertrochanteric osteotomy on the proximal femur of rabbits: assessment with power Doppler sonography and scintigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Doria, Andrea S. [University of Toronto (Canada). Hospital for Sick Children. Dept. of Diagnostic Imaging; Cunha, Fabiano G.; Modena; Marcelo; Godoy Junior, Rui de; Bolliger Neto, Raul; Guarniero, Roberto [Universidade de Sao Paulo (USP), SP (Brazil). Hospital das Clinicas. Dept. of Cirurgia Ortopedica]. E-mail: andrea.doria@sickkids.ca; Rodrigues, Consuelo Junqueira [Universidade de Sao Paulo (USP), SP (Brazil). Hospital das Clinicas. Dept. de Patologia; Garcez, Alexandre Teles; Melo, Ivani Bortoleti; Buchpiguel, Carlos; Molnar, Laszlo J. [Universidade de Sao Paulo (USP), SP (Brazil). Hospital das Clinicas. Dept. de Medicina Nuclear

    2007-07-01

    Objective: In bone injury, repair results in local increased vascularity and bone marrow remodeling. Characterizing the vascular and metabolic imaging patterns of the proximal femur following an intertrochanteric osteotomy may help clinicians decide proper management of the patient. Our objective was to measure Doppler sonography and scintigraphy interval changes in the proximal femur following intertrochanteric osteotomy and compare imaging and histomorphometric measurements in the late post-operative stage (6 weeks after surgery) in a rabbit model of bone injury. Materials and methods: Both hips of 12 adult rabbits were imaged with power Doppler sonography and scintigraphy prior to and after (7 days and 6 weeks) unilateral osteotomy. Accuracy of the imaging methods was evaluated using hip operative status and histomorphometric results (vascular fractional area and number of vessels per area unit) as reference standard measures. Results: A significant difference in the mean number of pixels was noted between operated and non-operated femura in late post-operative power Doppler examinations (P=0.049). Although without reaching statistical significance, the AUC of Doppler measurements (AUC=0.99) was numerically greater than the AUC of scintigraphy measurements (AUC=0.857{+-}0.099) (P=0.15) in differentiating proximal femura with regard to their fractional vascular areas in the late post-operative stage. In contrast, scintigraphy tended to perform better (AUC=0.984{+-}0.022) than Doppler ultrasound (AUC=0.746{+-}0.131) to demonstrate the vascularity intensity per area unit (P=0.07) in the late stage. Conclusion: Our results warrant further investigation to determine the value of different imaging modalities for assessment of pathologic changes following hip surgery. Power Doppler sonography demonstrated larger AUCs (representing higher accuracy) for the discrimination of vascular fractional areas and scintigraphy, for discrimination of the number of vessels per area

  6. First comparison of LES of an offshore wind turbine wake with dual-Doppler lidar measurement in the offshore wind farm "alpha ventus"

    Science.gov (United States)

    Vollmer, L.; Trabucchi, D.; Witha, B.; van Dooren, M.; Trujillo, J. J.; Schneemann, J.; Kühn, M.

    2014-12-01

    The planning of offshore wind farms is still tainted with high risks due to unknown power losses and a higher level of fatigue loads due to wake effects. Recently, Large Eddy Simulations (LES) are more and more used for simulating offshore wind turbine wakes as they resolve the atmospheric turbulence as well as the wake turbulence.However, for an application of LES wind fields to assess offshore wind farm flow a proper validation with measured data is necessary.Several methods have been investigated at the University of Oldenburg to compare LES wind fields and lidar measurements. In this study we apply one of these methods to validate wake simulations of a single wake of a 5MW wind turbine in the German offshore wind farm "alpha ventus" with processed dual-Doppler lidar measurements in the same wind farm.The simulations are performed with the LES model PALM, which has been enhanced by two different approaches of actuator models to simulate the wake of single wind turbines and the interaction of wakes in wind farms. Effects of tower and nacelle are regarded as well as simple turbine control mechanisms. The simulations are initialized with comparable atmospheric conditions as during the time of lidar operation by using measurements from the adjacent meteorological mast FINO 1.Plan Position Indicator (PPI) measurements have been performed with two long-range wind lidars installed at different opposing platforms at the border of the wind farm. A Cartesian grid was overlapped to the scanned region and a dual-Doppler algorithm was applied in order to estimate the horizontal stationary wind field on the grid nodes. To our knowledge, the presented study is one of the first validations of LES wake simulations with lidar measurements and first which validates offshore LES wake simulations with 2D lidar data.

  7. Mechanism Analysis of the Inverse Doppler Effect in Two-Dimensional Photonic Crystal based on Phase Evolution

    Science.gov (United States)

    Jiang, Qiang; Chen, Jiabi; Wang, Yan; Liang, Binming; Hu, Jinbing; Zhuang, Songlin

    2016-04-01

    Although the inverse Doppler effect has been observed experimentally at optical frequencies in photonic crystal with negative effective refractive index, its explanation is based on phenomenological theory rather than a strict theory. Elucidating the physical mechanism underlying the inverse Doppler shift is necessary. In this article, the primary electrical field component in the photonic crystal that leads to negative refraction was extracted, and the phase evolution of the entire process when light travels through a moving photonic crystal was investigated using static and dynamic finite different time domain methods. The analysis demonstrates the validity of the use of np (the effective refractive index of the photonic crystal in the light path) in these calculations, and reveals the origin of the inverse Doppler effect in photonic crystals.

  8. Experiment and theory: the case of the Doppler effect for photons

    CERN Document Server

    Giuliani, Giuseppe

    2015-01-01

    In 1907, Einstein suggested an experiment with flying atoms for corroborating time dilation. In that paper, the flying atom was conceived as a flying clock: the reference to the Doppler effect was only indirect (the experiments by Stark to the first order of $v/c$). In 1922, Schr\\"odinger showed that the emission of a light quantum by a (flying) atom is regulated by the conservation laws of energy and linear momentum. Therefore, the Doppler effect for photons is the consequence of the energy and momentum exchange between the atom and the photon: a central role is played by the quantum energy jump $\\Delta E$ of the transition (a relativistic invariant). The first realization of the experiment devised by Einstein is due to Ives and Stilwell (1938). Since then till nowadays experiments of this kind have been repeated in search of better precision and/or a deviation from the predictions of special relativity. The striking feature is that all the papers dealing with these experiments completely neglect Schr\\"oding...

  9. Doppler shift of the quiet region measured by meridional scans with the EUV Imaging Spectrometer onboard Hinode

    CERN Document Server

    Kitagawa, N; Yokoyama, T

    2015-01-01

    Spatially averaged (> 50'') EUV spectral lines in the transition region of solar quiet regions are known to be redshifted. Because the mechanism underlying this phenomenon is unclear, we require additional physical information on the lower corona for limiting the theoretical models. To acquire this information, we measured the Doppler shifts over a wide coronal temperature range (log T[K]=5.7--6.3) using the spectroscopic data taken by the Hinode EUV Imaging Spectrometer. By analyzing the data over the center-to-limb variations covering the meridian from the south to the north pole, we successfully measured the velocity to an accuracy of 3 km/s. Below log T[K] = 6.0, the Doppler shifts of the emission lines were almost zero with an error of 1--3 km/s; above this temperature, they were blueshifted with a gradually increasing magnitude, reaching - 6.3 +/- 2.1 km/s at log T[K]=6.25.

  10. Doppler Rayleigh/Mie/Raman lidar for wind and temperature measurements in the middle atmosphere up to 80 km

    Directory of Open Access Journals (Sweden)

    G. Baumgarten

    2010-11-01

    Full Text Available A direct detection Doppler lidar for measuring wind speed in the middle atmosphere up to 80 km with 2 h resolution was implemented in the ALOMAR Rayleigh/Mie/Raman lidar (69° N, 16° E. The random error of the line of sight wind is about 0.6 m/s and 10 m/s at 49 km and 80 km, respectively. We use a Doppler Rayleigh Iodine Spectrometer (DoRIS at the iodine line 1109 (~532.260 nm. DoRIS uses two branches of intensity cascaded channels to cover the dynamic range from 10 to 100 km altitude. The wind detection system was designed to extend the existing multi-wavelength observations of aerosol and temperature performed at wavelengths of 355 nm, 532 nm and 1064 nm. The lidar uses two lasers with a mean power of 14 W at 532 nm each and two 1.8 m diameter tiltable telescopes. Below about 49 km altitude the accuracy and time resolution is limited by the maximum count rate of the detectors used and not by the number of photons available. We report about the first simultaneous Rayleigh temperature and wind measurements by lidar in the strato- and mesosphere on 17 and 23 January 2009.

  11. Acute effects of vascular modifying agents in solid tumors assessed by noninvasive laser Doppler flowmetry and near infrared spectroscopy

    DEFF Research Database (Denmark)

    Kragh, Michael; Quistorff, Bjørn; Horsman, Michael R;

    2002-01-01

    The potential of noninvasive laser Doppler flowmetry (LDF) and near infrared spectroscopy (NIRS) to detect acute effects of different vascular-modifying agents on perfusion and blood volume in tumors was evaluated. C3H mouse mammary carcinomas (approximately 200 mm(3)) in the rear foot of CDF1 mice...... were treated with flavone acetic acid (FAA, 150 mg/kg), 5,6-dimethylxanthenone-4-acetic acid (DMXAA, 20 mg/kg), combretastatin A-4 disodium phosphate (CA4DP, 250 mg/kg), hydralazine (HDZ, 5 mg/kg), or nicotinamide (NTA, 500 mg/kg). Tumor perfusion before and after treatment was evaluated by noninvasive...... LDF, using a 41 degrees C heated custom-built LDF probe with four integrated laser/receiver units, and tumor blood volume was estimated by NIRS, using light guide coupled reflectance measurements at 800+/-10 nm. FAA, DMXAA, CA4DP, and HDZ significantly decreased tumor perfusion by 50%, 47%, 73...

  12. Online Doppler Effect Elimination Based on Unequal Time Interval Sampling for Wayside Acoustic Bearing Fault Detecting System.

    Science.gov (United States)

    Ouyang, Kesai; Lu, Siliang; Zhang, Shangbin; Zhang, Haibin; He, Qingbo; Kong, Fanrang

    2015-08-27

    The railway occupies a fairly important position in transportation due to its high speed and strong transportation capability. As a consequence, it is a key issue to guarantee continuous running and transportation safety of trains. Meanwhile, time consumption of the diagnosis procedure is of extreme importance for the detecting system. However, most of the current adopted techniques in the wayside acoustic defective bearing detector system (ADBD) are offline strategies, which means that the signal is analyzed after the sampling process. This would result in unavoidable time latency. Besides, the acquired acoustic signal would be corrupted by the Doppler effect because of high relative speed between the train and the data acquisition system (DAS). Thus, it is difficult to effectively diagnose the bearing defects immediately. In this paper, a new strategy called online Doppler effect elimination (ODEE) is proposed to remove the Doppler distortion online by the introduced unequal interval sampling scheme. The steps of proposed strategy are as follows: The essential parameters are acquired in advance. Then, the introduced unequal time interval sampling strategy is used to restore the Doppler distortion signal, and the amplitude of the signal is demodulated as well. Thus, the restored Doppler-free signal is obtained online. The proposed ODEE method has been employed in simulation analysis. Ultimately, the ODEE method is implemented in the embedded system for fault diagnosis of the train bearing. The results are in good accordance with the bearing defects, which verifies the good performance of the proposed strategy.

  13. Online Doppler Effect Elimination Based on Unequal Time Interval Sampling for Wayside Acoustic Bearing Fault Detecting System

    Directory of Open Access Journals (Sweden)

    Kesai Ouyang

    2015-08-01

    Full Text Available The railway occupies a fairly important position in transportation due to its high speed and strong transportation capability. As a consequence, it is a key issue to guarantee continuous running and transportation safety of trains. Meanwhile, time consumption of the diagnosis procedure is of extreme importance for the detecting system. However, most of the current adopted techniques in the wayside acoustic defective bearing detector system (ADBD are offline strategies, which means that the signal is analyzed after the sampling process. This would result in unavoidable time latency. Besides, the acquired acoustic signal would be corrupted by the Doppler effect because of high relative speed between the train and the data acquisition system (DAS. Thus, it is difficult to effectively diagnose the bearing defects immediately. In this paper, a new strategy called online Doppler effect elimination (ODEE is proposed to remove the Doppler distortion online by the introduced unequal interval sampling scheme. The steps of proposed strategy are as follows: The essential parameters are acquired in advance. Then, the introduced unequal time interval sampling strategy is used to restore the Doppler distortion signal, and the amplitude of the signal is demodulated as well. Thus, the restored Doppler-free signal is obtained online. The proposed ODEE method has been employed in simulation analysis. Ultimately, the ODEE method is implemented in the embedded system for fault diagnosis of the train bearing. The results are in good accordance with the bearing defects, which verifies the good performance of the proposed strategy.

  14. The 3 December 2015 paroxysm of Voragine crater at Etna: insights from Doppler radar measurements

    Science.gov (United States)

    Donnadieu, Franck; Freret-Lorgeril, Valentin; Gouhier, Mathieu; Coltelli, Mauro; Scollo, Simona; Fréville, Patrick; Hervier, Claude; Prestifilippo, Michele

    2016-04-01

    After a progressive intensification of Strombolian activity inside the Voragine crater in the evening of December 2 2015, Mount Etna produced a short but violent paroxysm in the night of 3 December 2015, the most intense of the last two decades at Voragine. Lava fountains, observed with the network of thermal and visible cameras of INGV-OE, reached well over 1 km in height with some jets of incandescent material reaching 3 km. A tephra column several kilometers high was produced and pyroclastic material was dispersed by winds in altitude to the NE, causing ash fallouts to affect many towns in Sicily and Reggio Calabria. A 23 cm-wavelength Doppler radar (VOLDORAD 2B), located about 3 km from NSEC at the Montagnola station and integrated into the INGV-OE instrumental network, has been continuously monitoring the explosive activity of Mt. Etna's summit craters since 2009. The radar beam probes 13 successive volumes 150 m deep aligned northward above the summit craters, providing two sets of parameters (echo power and velocity) at a rate of 0.2 s. We analyze the paroxysmal event of Voragine using the radar echoes and Doppler signals coming from volumes inside the lava fountain feeding the tephra column in combination with thermal and visible imagery and satellite data. The radar range gating allowed us to immediately discriminate the central craters as the source of the tephra emission and to estimate the lava fountain width between 300 and 450 m. The backscattered power, which is related to the erupted tephra mass load in the beam, and Doppler velocities help to mark the transition from Strombolian activity to lava fountaining, providing onset and end times of the fountain. The tephra flux into the radar beam started to increase after 02:00 UTC with a strong increase at 02:20 UTC marking the transition to continuous lava fountaining. The climax was reached between ca. 02:35 and 03:15 UTC with maintained high echo power and ejection velocities of 190 m/s in average

  15. Characteristics of ionospheric plasma drifts as obtained from Doppler ionosonde measurements at magnetic equator over Indian sector

    Science.gov (United States)

    Samireddipalle, Sripathi; Banola, Sridhar; Singh, Ram

    2016-07-01

    We present equatorial plasma drifts over Tirunelveli (8.73°N, 77.70°E; Dip 0.5°N), an equatorial site over Indian region using Doppler interferometry technique of Canadian Advanced Digital Ionosonde (CADI) system. In the Doppler interferometry technique, it is possible to infer three dimensional bulk motion of the scatterers as reflected from the ionosphere at selected frequencies using spaced receivers arranged in mag. east-west, north-south directions. Spectral phases and amplitudes are calculated using FFT to identify the Doppler frequencies and their drifts. This technique produces reliable drifts when sharp refractive index gradients exists which produces higher scattering sources. The vertical drifts so obtained are compared with same drifts from Digisonde at Trivandrum. After having compared with Digisonde drifts, we studied the temporal and seasonal variability of these drifts during quiet periods for the year 2012. It is seen that vertical drifts exhibited equinoctial maximum in the Pre-Reversal-Enhancement (PRE) followed by winter and summer respectively. A comparison of these vertical drifts is made with drifts obtained from (a) virtual height measured at 4 MHz and (b) Fejer drift model. The comparison suggests that Doppler vertical drifts are relatively higher as compared to the drifts obtained from model and virtual height. However, the correlation seems to be good around evening PRE times. The zonal drifts, on the other hand, showed westward drifts during daytime with mean drifts of ~250 m/s, while they are eastward during nighttime with mean drifts of ~150 m/s. These drifts seems to be higher as compared to zonal drifts obtained in the South American sector. However, the zonal drifts so obtained showed good correlation with Equatorial Electrojet (EEJ) strength suggesting zonal drifts are influenced by E region drifts during daytime in agreement with Woodman et al., 2013 paper. The magnitude of these drifts are comparable to other independent

  16. Feasibility Study of Velocity and Temperature Measurements of an Arcjet Flow using Laser Resonance Doppler Velocimetric (LRDV) Technique

    Science.gov (United States)

    Rob, Mohammad A.

    1996-01-01

    Thermal Protection System (TPS) materials are used in space vehicles to shield from high heating environment encountered during their atmospheric reentry. Arcjet wind tunnels are used to simulate the flowfield encountered by the spacecrafts, and are used for testing TPS materials. How well these tests simulate the actual heating environment encountered by space vehicles depends on the characteristics of the simulated flow. The flow characterization requires the determination of temperature, concentration, and velocity of the various atomic and molecular species present in the flow. However, determining these parameters requires a complex set of both analytical and experimental procedures. The ability to properly simulate the flight environment is directly related to the accuracy with which these techniques can be used to define the arcjet Laser Resonance Doppler Velocimetric (LRDV) technique can be used to accurately determine the velocity and temperature of a gaseous species. In this technique, the medium is probed with a laser beam that is in resonance with an absorbing transition of the species. The absorption lineshape is Doppler-shifted due to the flow velocity of the species, and the frequency shift is detected as the variation in intensity of the fluorescence emitted by the species. Thus a measurement of the Doppler shift and the width of a spectral line can give both the temperature and the velocity of the flowfield. This summer, our project was to make a feasibility study to set up an experimental arrangement for the laser resonance Doppler velocimetric technique using a ring dye laser. Experiments required troubleshooting, cleaning, testing, and alignment of two lasers and several diagnostics instruments. All instruments and lasers necessary for the project worked well, but the output power of the broadband fundamental dye laser was limited to about 20 mW. This was quite low as compared to that necessary to obtain second harmonic oscillation at 327.49 nm

  17. Effects of GSM 900 MHz on middle cerebral artery blood flow assessed by transcranial Doppler sonography.

    Science.gov (United States)

    Ghosn, Rania; Thuróczy, György; Loos, Nathalie; Brenet-Dufour, Valérie; Liabeuf, Sophie; de Seze, René; Selmaoui, Brahim

    2012-12-01

    Mobile phone use has increased worldwide but its possible effects on the brain remain unclear. The aim of the present study was to investigate the effect of acute exposure to a radio frequency electromagnetic field (RF EMF) generated by a mobile phone operating in the Global System for Mobile Communication (GSM) 900 MHz on cerebral blood flow. Twenty-nine volunteers attended two experimental sessions: a sham exposure session and a real exposure session in a cross-over double-blind study in which a mobile phone was positioned on the left side of the head. In one session, the mobile phone was operated without RF radiation (sham phone) and in the other study it was operated with RF radiation (real phone) for 20 min. Thus, each subject served as its own control. Middle cerebral artery blood flow was monitored noninvasively by transcranial Doppler sonography to measure middle cerebral artery blood flow velocity. Pulsatility index and resistance index were also evaluated. A voluntary breath holding physiological test was carried out as a positive control for testing cerebral vasoreactivity. Hemodynamic variables were recorded and analyzed before, during and after mobile phone exposure. No significant changes were detected in studied variables in middle cerebral arteries during sham or real exposure. In the exposed side the cerebral blood flow velocity, the pulsatility index and the resistance index during sham and real exposure were respectively: [61.9 ± 1.3, 61.7 ± 1.3 cm/s (P = 0.89)]; [0.93 ± 0.03, 0.90 ± 0.02 (P = 0.84)] and [0.58 ± 0.01, 0.58 ± 0.01 (P = 0.96)] at baseline; and [60.6 ± 1.3, 62 ± 1.6 cm/s (P = 0.40)]; [0.91 ± 0.03, 0.87 ± 0.03 (P = 0.97)]; [0.57 ± 0.01, 0.56 ± 0.01 (P = 0.82)] after 20 min of exposure. Twenty minutes of RF exposure to a mobile phone does not seem to affect the cerebral circulation.

  18. Coherent Doppler Lidar for Measuring Altitude, Ground Velocity, and Air Velocity of Aircraft and Spaceborne Vehicles

    Science.gov (United States)

    Amzajerdian, Farzin (Inventor); Pierrottet, Diego F. (Inventor)

    2015-01-01

    A Doppler lidar sensor system includes a laser generator that produces a highly pure single frequency laser beam, and a frequency modulator that modulates the laser beam with a highly linear frequency waveform. A first portion of the frequency modulated laser beam is amplified, and parts thereof are transmitted through at least three separate transmit/receive lenses. A second portion of the laser beam is used as a local oscillator beam for optical heterodyne detection. Radiation from the parts of the laser beam transmitted via the transmit/receive lenses is received by the respective transmit/receive lenses that transmitted the respective part of the laser beam. The received reflected radiation is compared with the local oscillator beam to calculate the frequency difference there between to determine various navigational data.

  19. Clutter and rainfall discrimination by means of doppler-polarimetric measurements and vertical reflectivity profile analysis

    Directory of Open Access Journals (Sweden)

    F. Silvestro

    2005-01-01

    Full Text Available The estimation of rainfall rate and other parameters from radar scattering volume is heavily affected by the presence of intense sea and ground clutter and echoes which appears in anomalous propagation condition. To deal with these non meteorological echoes we present a new clutter removal algorithm which combines the results of previous works. The algorithm fully exploits both the Doppler and polarimetric capabilities of the radar used and the analysis of vertical reflectivity profile in order to achieve the better identification of the meteorological and non-meteorological targets. The algorithm has been applied to the C-band radar of Monte Settepani (Savona, Italy, which runs in a high-topography environment. Preliminary results are presented.

  20. Anomalous Doppler effect at interaction of electromagnetic waves with electron beams experimental researches and opportunities for application

    CERN Document Server

    Ivanov, B I

    2002-01-01

    The anomalous Doppler effect (ADE) in systems consisting of an electron beam and slow wave structure in longitudinal magnetic field is considered. Resonance condition for amplifiers and generators based on ADE enables resonance maintaining in case of wave phase velocity or beam velocity changing (acceleration of ions at ADE, reception of high efficiency at microwave generation). Essential advantages can be reached at combination of ADE and normal Doppler effect. The review of experimental studies of ADE is presented: amplification and generation of microwaves, energetic relations, excitation of accelerating IH-structures, development of ion acceleration.

  1. Evaluation of laser Doppler flowmetry for measuring coronary band and laminar microcirculatory blood flow in clinically normal horses.

    Science.gov (United States)

    Adair, H S; Goble, D O; Shires, G M; Sanders, W L

    1994-04-01

    Once daily for 3 days, laser Doppler flowmetry was used in 5 healthy, nonsedated adult horses to evaluate coronary band and laminar microcirculatory blood flow (MBF) in both forelimbs. The coronary band had significantly (P measurement period in any one site. Significant (P laminar MBF. On occlusion of the digital arteries at the level of the fetlock, marked decrease in coronary band and laminar MBF was observed. Twenty minutes after IV administration of acetylpromazine, marked increase in coronary band and laminar MBF was observed. The technique was easily performed in standing nonsedated horses, did not inflict discomfort, lacked complications, and measurements were repeatable. This technique provides an index of digital MBF, either intermittently or continuously, avoiding introduction of invasive variables associated with other techniques.

  2. A time-space synchronization of coherent Doppler scanning lidars for 3D measurements of wind fields

    DEFF Research Database (Denmark)

    Vasiljevic, Nikola

    This thesis consists of the results of a Ph.D. study that was focused on the development of the system of three time-space synchronized pulsed coherent Doppler scanning lidars, which are coordinated by a remote ’master computer’. This system has the unique capability to measure a complete three...... synchronization and time control of the emission, steering and acquisition were achieved, resulting that the complete lidar measurement process is controlled from the single hardware component. The system was formed using a novel approach, in which the master computer simultaneously coordinates the remote lidars...... through a UDP/IP and TCP/IP network by exchange of network packets. Since the size of the packets is roughly 1 kB, this approach allows an uninterrupted and fast coordination of the lidars, even in the case of mobile networks such as GSM. With this approach a maximum lag of 10 ms was observed in terms...

  3. Steady flow in a model of the human carotid bifurcation. Part II--laser-Doppler anemometer measurements.

    Science.gov (United States)

    Bharadvaj, B K; Mabon, R F; Giddens, D P

    1982-01-01

    The evidence for hypothesizing a relationship between hemodynamics and atherogenesis as well as the motivation for selecting the carotid bifurcation for extensive fluid dynamic studies has been discussed in Part I of this two-paper sequence. Part II deals with velocity measurements within the bifurcation model described by Fig. 1 and Table 1 of the previous paper. A plexiglass model conforming to the dimensions of the average carotid bifurcation was machined and employed for velocity measurements with a laser-Doppler anemometer (LDA). The objective of this phase of the study was to obtain quantitative information on the velocity field and to estimate levels and directions of wall shear stress in the region of the bifurcation.

  4. Turbulent slurry flow measurement using ultrasonic Doppler method in rectangular pipe

    Science.gov (United States)

    Bareš, V.; Krupička, J.; Picek, T.; Brabec, J.; Matoušek, V.

    2014-03-01

    Distribution of velocity and Reynolds stress was measured using ultrasonic velocimetry in flows of water and Newtonian water-ballotini slurries in a pressurized Plexiglas pipe. Profiles of the measured parameters were sensed in the vertical plane at the centreline of a rectangular cross section of the pipe. Reference measurements in clear water produced expected symmetrical velocity profiles the shape of which was affected by secondary currents developed in the rectangular pipe. Slurry-flow experiments provided information on an effect of the concentration of solid grains on the internal structure of the flow. Strong attenuation of velocity fluctuations caused by a presence of grains was identified. The attenuation increased with the increasing local concentration of the grains.

  5. Fiber-optic laser-Doppler anemometer microscope developed for the measurement of microvascular red cell velocity.

    Science.gov (United States)

    Seki, J

    1990-11-01

    A fiber-optic laser-Doppler anemometer microscope (FLDAM) was developed and its applicability to the study of microvascular blood flow was examined by measuring red cell velocities in vivo and in vitro. The FLDAM consists of an intravital microscope equipped with a fringe-mode back-scatter LDA. A data processing method of the Doppler signal which used frequency averaging over the entire frequency range of the power spectrum was developed. Spatial resolution of the FLDAM varied from 17 to 200 microns with 50X to 5X objectives. In vitro experiments showed that the red cell velocity obtained by the FLDAM was equal to the mean flow velocity, within the accuracy of the measurements, for tube diameters from 35 to 100 microns, mean velocity from 0.7 to 17 mm/sec, and feed hematocrit of 20%, when 10X or 20X objectives were used. In vivo red cell velocity measurements conducted with the FLDAM in microvessels of rat mesentery with diameters from 6.5 to 49 microns showed that red cell velocities were about 1/1.6 times smaller than those obtained by the two-slit technique, which also suggests that the velocity obtained by the FLDAM corresponds to the mean flow velocity. This relationship was also established from theoretical considerations for the case where the FLDAM sampling volume covers the entire vessel cross section. Furthermore the frequency response of the FLDAM was established to be about 20 Hz, which was sufficient for measurement of pulsatile velocities in rat mesenteric microvessels.

  6. A Comparison of sector-scan and dual Doppler wind measurements at Høvsøre Test Station – one lidar or two?

    DEFF Research Database (Denmark)

    Simon, Elliot; Courtney, Michael

    .5m met-mast, which provided reference wind speed and direction values. The 10 minute reconstructed lidar measurements were in excellent agreement with the reference instrumentation. The dual Doppler results matched within 0.1% of the reference wind speed, with very low levels of unbiased scatter...... from the coast). Ground based remote sensing has numerous advantages over traditional in-situ (offshore met mast) and buoy based installations, mainly in terms or cost, complexity, and failure/delay risk. Since each lidar can only measure a portion of the wind vector, it is necessary to either deploy...... two devices in tandem (dual Doppler) or employ a single Doppler scanning strategy such as PPI (plan position indicator, or sector scan) which allows for estimation of the two component horizontal wind vector. In preparation for a six month long measurement campaign along the Danish North Sea, a one...

  7. Postocclusive Hyperemia Measured with Laser Doppler Flowmetry and Transcutaneous Oxygen Tension in the Diagnosis of Primary Raynaud's Phenomenon: A Prospective, Controlled Study

    Science.gov (United States)

    Maga, Paweł; Henry, Brandon Michael; Kmiotek, Elizabeth K.; Gregorczyk-Maga, Iwona; Kaczmarczyk, Paweł; Niżankowski, Rafał

    2016-01-01

    The aim of this study was to measure the sensitivity and specificity of transcutaneous oxygen tension and postocclusive hyperemia testing using laser Doppler flowmetry in patients with primary Raynaud's phenomenon. One hundred patients and one hundred controls were included in the study. Baseline microvascular blood flow and then time to peak flow following occlusion were measured using laser Doppler flowmetry. Afterwards, the transcutaneous oxygen tension was recorded. The sensitivities of baseline microvascular blood flow, postocclusive time to peak flow, and transcutaneous oxygen tension were 79%, 79%, and 77%, respectively. The postocclusive time peak flow had a superior specificity of 90% and area under the curve of 0.92 as compared to 66% and 0.80 for baseline microvascular flow and 64% and 0.76 for transcutaneous oxygen tension. Time to postocclusive peak blood flow measured by laser Doppler flowmetry is a highly accurate test for differentiating patients with primary Raynaud's phenomenon from healthy controls. PMID:28101516

  8. Comparison of ankle-brachial index measured by an automated oscillometric apparatus with that by standard Doppler technique in vascular patients

    DEFF Research Database (Denmark)

    Korno, M.; Eldrup, N.; Sillesen, H.

    2009-01-01

    OBJECTIVES: To evaluate the determination of ankle-brachial indices (ABIs) using a simple automated ankle pressure measurement device in comparison with the Doppler technique. DESIGN: ABI was measured in 61 patients (122 legs) admitted to the department of vascular surgery, Rigshospitalet. ABI...... was calculated twice using both the methods on both legs. MATERIALS AND METHODS: We tested the automated oscillometric blood pressure device, CASMED 740, for measuring ankle and arm blood pressure and compared it with the current gold standard, the hand-held Doppler technique, by the Bland-Altman analysis....... RESULTS: Using the Doppler-derived ABI as the gold standard, the sensitivity and specificity of the oscillometric method for determining an ABI Udgivelsesdato: 2009/11...

  9. Postocclusive Hyperemia Measured with Laser Doppler Flowmetry and Transcutaneous Oxygen Tension in the Diagnosis of Primary Raynaud's Phenomenon: A Prospective, Controlled Study.

    Science.gov (United States)

    Maga, Paweł; Henry, Brandon Michael; Kmiotek, Elizabeth K; Gregorczyk-Maga, Iwona; Kaczmarczyk, Paweł; Tomaszewski, Krzysztof A; Niżankowski, Rafał

    2016-01-01

    The aim of this study was to measure the sensitivity and specificity of transcutaneous oxygen tension and postocclusive hyperemia testing using laser Doppler flowmetry in patients with primary Raynaud's phenomenon. One hundred patients and one hundred controls were included in the study. Baseline microvascular blood flow and then time to peak flow following occlusion were measured using laser Doppler flowmetry. Afterwards, the transcutaneous oxygen tension was recorded. The sensitivities of baseline microvascular blood flow, postocclusive time to peak flow, and transcutaneous oxygen tension were 79%, 79%, and 77%, respectively. The postocclusive time peak flow had a superior specificity of 90% and area under the curve of 0.92 as compared to 66% and 0.80 for baseline microvascular flow and 64% and 0.76 for transcutaneous oxygen tension. Time to postocclusive peak blood flow measured by laser Doppler flowmetry is a highly accurate test for differentiating patients with primary Raynaud's phenomenon from healthy controls.

  10. Direct Detection 1.6?m DIAL / Doppler Lidar for Measurements of CO2 Concentration and Wind Profiles (Invited)

    Science.gov (United States)

    Shibata, Y.; Nagasawa, C.; Abo, M.

    2013-12-01

    Knowledge of present carbon sources and sinks including their spatial distribution and their variation in time is one of the essential information for predicting future CO2 atmospheric concentration levels. Moreover, wind information is an important parameter for transport simulations and inverse estimation of surface CO2 flux. The differential absorption lidar (DIAL) and the Doppler wind lidar with the range resolution is expected to measure atmospheric CO2 profiles and wind profiles in the atmospheric boundary layer and lower troposphere from a ground platform. We have succeeded to develop a scanning 1.6 μm DIAL and incoherent Doppler lidar system for simultaneously measuring CO2 concentration and wind speed profiles. Our 1.6 μm DIAL system consists of the Optical Parametric Generator (OPG) transmitter that excited by the LD pumped Nd: YAG laser with high repetition rate (500 Hz) and the receiving optics that included the near-infrared photomultiplier tube with high quantum efficiency operating at the photon counting mode, a fiber Bragg grating (FBG) filter to detect a Doppler shift, and a 25 cm telescope [1] [2]. We had developed an optical parametric oscillator (OPO) system for 1.6 μm CO2 DIAL[3]. To achieve continuous tuning of the resonant OPO output without mode hopping, it is necessary to vary the OPO cavity length synchronously with the seed-frequency. On the other hand, the OPG does not require a cavity and instead rely on sufficient conversion efficiency to be obtained with a single pass through the crystal. The single-frequency oscillation of the OPG was achieved by injection seeding. The CO2-DIAL was operated with the range-height indicator (RHI) mode, and the 2-D measurement provided inhomogeneity in the boundary layer. Vertical CO2 concentration profiles and wind profiles were also measured simultaneously. The elevation angle was fixed at 52 deg and CO2 concentration profiles were obtained up to 1 km altitude with 200 m height resolution. Vertical

  11. Measurement of retinal blood flow in the rat by combining Doppler Fourier-domain optical coherence tomography with fundus imaging

    Science.gov (United States)

    Werkmeister, René M.; Vietauer, Martin; Knopf, Corinna; Fürnsinn, Clemens; Leitgeb, Rainer A.; Reitsamer, Herbert; Gröschl, Martin; Garhöfer, Gerhard; Vilser, Walthard; Schmetterer, Leopold

    2014-10-01

    A wide variety of ocular diseases are associated with abnormalities in ocular circulation. As such, there is considerable interest in techniques for quantifying retinal blood flow, among which Doppler optical coherence tomography (OCT) may be the most promising. We present an approach to measure retinal blood flow in the rat using a new optical system that combines the measurement of blood flow velocities via Doppler Fourier-domain optical coherence tomography and the measurement of vessel diameters using a fundus camera-based technique. Relying on fundus images for extraction of retinal vessel diameters instead of OCT images improves the reliability of the technique. The system was operated with an 841-nm superluminescent diode and a charge-coupled device camera that could be operated at a line rate of 20 kHz. We show that the system is capable of quantifying the response of 100% oxygen breathing on the retinal blood flow. In six rats, we observed a decrease in retinal vessel diameters of 13.2% and a decrease in retinal blood velocity of 42.6%, leading to a decrease in retinal blood flow of 56.7%. Furthermore, in four rats, the response of retinal blood flow during stimulation with diffuse flicker light was assessed. Retinal vessel diameter and blood velocity increased by 3.4% and 28.1%, respectively, leading to a relative increase in blood flow of 36.2%;. The presented technique shows much promise to quantify early changes in retinal blood flow during provocation with various stimuli in rodent models of ocular diseases in rats.

  12. Doplerovi brodski navigacioni brzinomjeri / Maritime navigational Doppler logs

    Directory of Open Access Journals (Sweden)

    Milovan Unković

    2006-01-01

    Full Text Available Doplerovi navigacioni brodski brzinomjeri rade na principu Doplerovog efekta. Doplerov predajni projektor emituje snop ultrazvučnih vibracija u vodi, a drugi (ili isti projektor prima odbijeni signal od dna ili od sloja vode. U ovom radu opisana je teorija Doplerovog efekta, primjena te teorije na brodskim brzinomjerima, konstrukcija i karakteristike savremenih Doplerovih brzinomjera. / The Doppler maritime navigational logs are based on measurement of the Doppler effect. A Doppler log transmitting transducer emits beam of sound vibration in the water, and a second (or the same transducer receives the echo from the sea bed or -water layer. In this article describes theory of Doppler effect, using this theory in maritime logs, construction and performance of modern Doppler logs.

  13. Non-migrating diurnal tides as measured by the TIMED Doppler interferometer: Preliminary results

    Science.gov (United States)

    Oberheide, J.; Wu, Q.; Ortland, D. A.; Killeen, T. L.; Hagan, M. E.; Roble, R. G.; Niciejewski, R. J.; Skinner, W. R.

    Preliminary meridional wind data from the TIMED Doppler interferometer (TIDI) onboard the TIMED satellite are analyzed for non-migrating diurnal tides. Tidal definitions are given for the most pronounced westward, eastward and standing oscillations ( w2, e3, s0). The analysis interval is March 2002 to June 2004 and covers the altitude range 85-105 km. Monthly tidal wind fields from 40°S to 40°N are presented. TIDI tides compare favorably with previously reported 95 km HRDI results. Non-migrating diurnal tidal wind speeds larger than 30 m/s are observed thus emphasizing the important role of non-migrating tides in middle atmosphere coupling. A comparative analysis with the global scale wave model (GSWM) and the thermosphere-ionosphere-mesosphere-electrodynamics general circulation model (TIME-GCM) indicates that both latent heat release in the tropical troposphere and non-linear planetary wave/migrating tide interaction are important sources of non-migrating tides in the mesosphere and lower thermosphere.

  14. Possible anomalous doppler shift effect in superconductor Sr sub 2 RuO sub 4

    CERN Document Server

    Tanaka, Y; Tanuma, Y; Kashiwaya, S

    2003-01-01

    The effect of Doppler shift is studied in a model for the alpha-beta bands of Sr sub 2 RuO sub 4 consisting of two hybridized one-dimensional (1D) bands. Assuming a superconducting gap with nodes in a diagonal direction, we examine the oscillation of surface density of states and thermal conductivity under a rotating magnetic field. Upon varying the strength of hybridization, the oscillation of these quantities is found to exhibit 2D to 1D crossover. In the crossover regime, which corresponds to the actual Sr sub 2 RuO sub 4 , the thermal conductivity exhibits a two-fold-symmetry oscillation, while a four-fold-symmetry component in the oscillation is barely detectable.

  15. Effect of intracapsular hyperpressure on femoral head blood flow. Laser Doppler flowmetry in dogs.

    Science.gov (United States)

    Vegter, J; Klopper, P J

    1991-08-01

    Intracapsular hyperpressure in the hip joint of dogs affected femoral head blood flow, especially in the juvenile animals. Graphic recording of the laser Doppler signal curve using rapid sampling time demonstrated venous hip joint tamponade in both juvenile and adult dogs. Laser Doppler flowmetry seems to be a sensitive and reproducible method to demonstrate femoral-head blood-flow changes.

  16. Continuous measurement of cerebral cortical blood flow by laser-Doppler flowmetry in a rat stroke model

    Energy Technology Data Exchange (ETDEWEB)

    Dirnagl, U.; Kaplan, B.; Jacewicz, M.; Pulsinelli, W. (Cornell Univ. Medical College, New York, NY (USA))

    1989-10-01

    Laser-Doppler flowmetry (LDF), a new method allowing instantaneous, continuous, and noninvasive measurements of microcirculatory blood flow in a small tissue sample, was evaluated for its accuracy in monitoring regional cerebral blood flow (rCBF) in the cortical microcirculation after focal cerebral ischemia. Wistar and spontaneously hypertensive rats (SHR, n = 19) were subjected to permanent occlusion of the middle cerebral and common carotid arteries. Absolute rCBF in a tissue sample of the ischemic hemisphere was measured autoradiographically with ({sup 14}C)iodoantipyrine as a tracer and compared to rCBF measured by LDF. Additionally, the percent change in rCBF between baseline and ischemic values was compared for both methods. Absolute rCBF values recorded with LDF correlated poorly (r = 0.54) with ({sup 14}C)iodoantipyrine measurements. In contrast LDF readings expressed as a percentage of ischemic vs. preocclusion readings (relative LDF readings) correlated very well (r = 0.91) with the percent change in (14C)iodoantipyrine measurements. We conclude that LDF does not provide accurate measurements of absolute rCBF values but this method allows accurate measurements of changes in rCBF due to induction of focal cerebral ischemia.

  17. Continuous measurement of cerebral cortical blood flow by laser-Doppler flowmetry in a rat stroke model.

    Science.gov (United States)

    Dirnagl, U; Kaplan, B; Jacewicz, M; Pulsinelli, W

    1989-10-01

    Laser-Doppler flowmetry (LDF), a new method allowing instantaneous, continuous, and noninvasive measurements of microcirculatory blood flow in a small tissue sample, was evaluated for its accuracy in monitoring regional cerebral blood flow (rCBF) in the cortical microcirculation after focal cerebral ischemia. Wistar and spontaneously hypertensive rats (SHR, n = 19) were subjected to permanent occlusion of the middle cerebral and common carotid arteries. Absolute rCBF in a tissue sample of the ischemic hemisphere was measured autoradiographically with [14C]iodoantipyrine as a tracer and compared to rCBF measured by LDF. Additionally, the percent change in rCBF between baseline and ischemic values was compared for both methods. Absolute rCBF values recorded with LDF correlated poorly (r = 0.54) with [14C]iodoantipyrine measurements. In contrast LDF readings expressed as a percentage of ischemic vs. preocclusion readings (relative LDF readings) correlated very well (r = 0.91) with the percent change in [14C]iodoantipyrine measurements. We conclude that LDF does not provide accurate measurements of absolute rCBF values but this method allows accurate measurements of changes in rCBF due to induction of focal cerebral ischemia.

  18. Comparison between Doppler echocardiography and hot-film anemometry in measuring the turbulent shear stress downstream of artificial mitral valves: a methodological study

    Institute of Scientific and Technical Information of China (English)

    SUN Yi; LI Rui-jie; LI Gan-niu; LI Bin; WANG Yu; MA Run-wei; YANG Bai-hui

    2013-01-01

    Background Turbulent shear stress (TSS) plays an important role in the research of fluid dynamics of heart valves.This study aimed to perform a quantitative study of TSS downstream of porcine artificial mitral valves in order to verify the correlation of hot-film anemometry (HFA) and Doppler echocardiography combined with computer-aided image analysis for the detection of TSS.Methods A porcine model of mitral valve replacement was established.HFA and Doppler ultrasound techniques were used to directly and indirectly measure TSS-relevant parameters of the artificial mitral valve following different mitral valve replacements:different approaches were used to reserve the subvalvular apparatus of the mitral valve.A correlation analysis was then carried out.Results There was a significant correlation between the HFA and Doppler ultrasound combined with computer-aided image analysis of the TSS at the same time and at the same site.No significant difference was found in the TSS measured by the two methods.Conclusions Compared with HFA,Doppler echocardiography combined with computer-aided image analysis is a safe,non-invasive,and real-time method that enables accurate and quantitative detection of TSS downstream in vivo,objectively reflecting the flow field downstream of the artificial mitral valve.Doppler ultrasound combined with computeraided image analysis can be employed for quantitatively evaluating the downstream hemodynamic performance of the mitral valve.

  19. Measurements of ultrasonic waves by means of laser Doppler velocimeter and an experimental study of elastic wave propagation in inhomogeneous media; Laser doppler sokudokei ni yoru choonpa keisoku to ganseki wo mochiita fukinshitsu baishitsu no hado denpa model jikken

    Energy Technology Data Exchange (ETDEWEB)

    Nishizawa, O.; Sato, T. [Geological Survey of Japan, Tsukuba (Japan); Lei, X. [Dia Consultants Company, Tokyo (Japan)

    1996-05-01

    In the study of seismic wave propagation, a model experimenting technique has been developed using a laser Doppler velocimeter (LDV) as the sensor. This technique, not dependent on conventional piezoelectric devices, only irradiates the specimen with laser to measure the velocity amplitude on the target surface, eliminating the need for close contact between the specimen and sensor. In the experiment, elastic penetration waves with their noise levels approximately 0.05mm/s were observed upon application of vibration of 10{sup 6}-10{sup 5}Hz. The specimen was stainless steel or rock, and waveforms caught by the LDV and piezoelectric device were compared. As the result, it was found that the LDV is a powerful tool for effectively explaining elastic wave propagation in inhomogeneous media. The piezoelectric device fails to reproduce accurately the waves to follow the initial one while the LDV detect the velocity amplitude on the specimen surface in a wide frequency range encouraging the discussion over the quantification of observed waveforms. 10 refs., 7 figs.

  20. Liquid water content measurements using the Phase Doppler Particle Analyzer in the NASA Lewis Icing Research Tunnel

    Science.gov (United States)

    Rudoff, R. C.; Bachalo, E. J.; Bachalo, W. D.; Oldenburg, J. R.

    1993-01-01

    The performance of a Phase Doppler Particle Analyzer (PDPA) based icing probe suitable for use in icing tunnels and airborne applications is assessed. The instrument is shown to accurately and repeatably measure liquid water content (LWC) to within better than 20 percent of the nominal expected value in the NASA Lewis IRT. This was seen to be true over a wide range of tunnel operating conditions. The principles used by the PDPA for MVD and LWC determination are discussed. Calibration curves for the IRT median volume diameter are also determined and compared to the existing calibration determined via the PMS instruments. As has been shown in previous work, the PDPA is quite repeatable. The results are typically 3 to 5 microns smaller than the existing calibrations for a given run condition. Reasons for these differences are also discussed.

  1. First ever cross comparison of thermospheric wind measured by narrow- and wide-field optical Doppler spectroscopy

    Science.gov (United States)

    Dhadly, M. S.; Meriwether, J.; Conde, M.; Hampton, D.

    2015-11-01

    We present the first ever cross comparisons of F region horizontal neutral wind measurements taken using two different types of optical Doppler spectrometer: all-sky scanning Doppler imagers (SDI) and narrow-field Fabry-Perot interferometers (NFPIs). Horizontal neutral winds were inferred using bistatic observations from three NFPIs, together with monostatic and bistatic observations from two SDIs. All instruments were located in Alaska. Cross comparisons were made for a total of seven nights in January and February 2010. The results show a high degree of correlation between the diurnal behaviors of the line-of-sight (LOS) winds measured by both instruments. The SDI and NFPI LOS wind time series also often contained high-frequency fluctuations with similar overall characteristics, strongly suggesting that these fluctuations were geophysical in origin. However, the amplitude of the high-frequency component was stronger in the NFPI LOS wind than in the SDI data. Even the smallest SDI angular resolution element is much larger than the NFPI field of view, suggesting that its relative insensitivity to high frequencies is because these fluctuations are associated with local-scale structures whose spatial extent is smaller than ˜40 km spanned by the smallest SDI viewing field. Upon fitting vectors to the LOS wind data, close agreement was found between the wind components estimated by the two types of instrument. Discrepancies that did arise occurred most often when the neutral wind speed was weak, suggesting that conditions capable of driving higher neutral wind speeds also suppressed the development of small-scale structures in the thermospheric neutral wind fields.

  2. LASER DOPPLER-VELOCIMETER BASED ON THE SELF-MIXING EFFECT IN A FIBER-COUPLED SEMICONDUCTOR-LASER - THEORY

    NARCIS (Netherlands)

    KOELINK, MH; SLOT, M; DEMUL, FFM; GREVE, J; GRAAFF, R; DASSEL, ACM; AARNOUDSE, JG

    1992-01-01

    A laser Doppler velocimeter that consists of a semiconductor laser coupled to a fiber and that uses the self-mixing effect is presented. The velocimeter can be used for solids and fluids. A theoretical model is developed to describe the self-mixing signals as a function of the amount of feedback int

  3. Development of the doppler electron velocimeter: theory.

    Energy Technology Data Exchange (ETDEWEB)

    Reu, Phillip L.

    2007-03-01

    Measurement of dynamic events at the nano-scale is currently impossible. This paper presents the theoretical underpinnings of a method for making these measurements using electron microscopes. Building on the work of Moellenstedt and Lichte who demonstrated Doppler shifting of an electron beam with a moving electron mirror, further work is proposed to perfect and utilize this concept in dynamic measurements. Specifically, using the concept of ''fringe-counting'' with the current principles of transmission electron holography, an extension of these methods to dynamic measurements is proposed. A presentation of the theory of Doppler electron wave shifting is given, starting from the development of the de Broglie wave, up through the equations describing interference effects and Doppler shifting in electron waves. A mathematical demonstration that Doppler shifting is identical to the conceptually easier to understand idea of counting moving fringes is given by analogy to optical interferometry. Finally, potential developmental experiments and uses of a Doppler electron microscope are discussed.

  4. Comparison of velocity measurements by high temperature anemometer and laser-doppler anemometer with results of CFD-simulation

    Directory of Open Access Journals (Sweden)

    Zimmel M.

    2002-01-01

    Full Text Available In the present work, results of gas velocity measurements with a newly developed vane anemometer (HTA - High Tem per a ture Anemometer are compared with re sults of measurements obtained from Laser-Doppler Anemometer (LDA. The measurements were carried out at the combustion test rig of ALSTOM Combustion Services Ltd. in Derby/UK, and demonstrate the usability and accuracy of the HTA under severe conditions. The test rig was provided with a triple register low NOx coal burner firing pulverised Colombian blended coal at a constant thermal load of 30 MW. Although the environment was both very hot (up to 1350 °C and dust laden, the vane anemometer worked with an accuracy comparable to the reference LDA measurement. Since the anemometer represents a relatively simple to use and low cost option compared with LDA, it is seen as aviable alternative for gas velocity measurements in difficult environments. The measurement results are also demonstrated to compare favourably with the results from CFD calculations of the flow in the combustion chamber of the test rig.

  5. Two-component laser Doppler anemometer for measurement of velocity and turbulent shear stress near prosthetic heart valves.

    Science.gov (United States)

    Woo, Y R; Yoganathan, A P

    1985-01-01

    The velocity and turbulent shear stress measured in the immediate vicinity of prosthetic heart valves play a vital role in the design and evaluation of these devices. In the past hot wire/film and one-component laser Doppler anemometer (LDA) systems were used extensively to obtain these measurements. Hot wire/film anemometers, however, have some serious disadvantages, including the inability to measure the direction of the flow, the disturbance of the flow field caused by the probe, and the need for frequent calibration. One-component LDA systems do not have these problems, but they cannot measure turbulent shear stresses directly. Since these measurements are essential and are not available in the open literature, a two-component LDA system for measuring velocity and turbulent shear stress fields under pulsatile flow conditions was assembled under an FDA contract. The experimental methods used to create an in vitro data base of velocity and turbulent shear stress fields in the immediate vicinity of prosthetic heart valves of various designs in current clinical use are also discussed.

  6. A modified beam-to-earth transformation to measure short-wavelength internal waves with an acoustic Doppler current profiler

    Science.gov (United States)

    Scotti, A.; Butman, B.; Beardsley, R.C.; Alexander, P.S.; Anderson, S.

    2005-01-01

    The algorithm used to transform velocity signals from beam coordinates to earth coordinates in an acoustic Doppler current profiler (ADCP) relies on the assumption that the currents are uniform over the horizontal distance separating the beams. This condition may be violated by (nonlinear) internal waves, which can have wavelengths as small as 100-200 m. In this case, the standard algorithm combines velocities measured at different phases of a wave and produces horizontal velocities that increasingly differ from true velocities with distance from the ADCP. Observations made in Massachusetts Bay show that currents measured with a bottom-mounted upward-looking ADCP during periods when short-wavelength internal waves are present differ significantly from currents measured by point current meters, except very close to the instrument. These periods are flagged with high error velocities by the standard ADCP algorithm. In this paper measurements from the four spatially diverging beams and the backscatter intensity signal are used to calculate the propagation direction and celerity of the internal waves. Once this information is known, a modified beam-to-earth transformation that combines appropriately lagged beam measurements can be used to obtain current estimates in earth coordinates that compare well with pointwise measurements. ?? 2005 American Meteorological Society.

  7. Left ventricular dysfunction measured by tissue Doppler imaging and strain rate imaging in hypertensive adolescents

    Directory of Open Access Journals (Sweden)

    Hye Mi Ahn

    2010-01-01

    Full Text Available Purpose : Left ventricular (LV hypertrophy and impaired diastolic function may occur early in systemic hypertension. Diastolic dysfunction is associated with increased cardiovascular risk. Tissue Doppler imaging (TDI-derived tissue velocity and strain rate are new parameters for assessing diastolic dysfunction. The aim of this study is to determine whether TDI and strain rate imaging (SRI would improve the ability to recognize early impaired diastolic and systolic functions compared with conventional echocardiography in hypertensive adolescents. Methods : We included 38 hypertensive patients with systolic blood pressure above 140 mmHg or diastolic blood pressure above 90 mmHg. Ejection fraction and myocardial performance index (MPI were estimated by conventional echocardiography. Peak systolic myocardial velocity, early diastolic myocardial velocity (Em, and peak late diastolic myocardial velocity (Am were obtained by using TDI and SRI. Results : In the hypertensive group, interventricular septal thickness was significantly increased on M-mode echocardiography. Em/Am was significantly decreased at the mitral valve annulus. Among hypertensive subjects, the E strain rate at basal, mid, and apex was significantly decreased. Systolic strain was significantly decreased at the septum in the hypertensive group. Conclusion : Strain rate might be a useful new parameter for the quantification of both regional and global LV functions and could be used in long-term follow up in hypertensive patients. Early identification by SRI of subjects at risk for hypertensive and ventricular dysfunction may help to stratify risk and guide therapy. Further studies, including serial assessment of LV structure and function in a larger number of adolescents with hypertension, is necessary.

  8. General case of the Doppler effect of electromagnetic wave reflected by moving body%运动物体反射电磁波多普勒效应的一般情况

    Institute of Scientific and Technical Information of China (English)

    陈栋梁

    2001-01-01

    讨论了电磁波以任意角入射于运动物体反射信号多普勒效应的一般情况,给出了以可测量表达的多普勒效应基本关系的直接推导.%For any angle of incidence,general case of Doppler effect of electromagnetic wave reflected by moving body has been discussed.A direct derivation of the Doppler effect basic formula expressed by measurable quantities is given.

  9. First middle-atmospheric zonal wind profile measurements with a new ground-based microwave Doppler-spectro-radiometer

    Directory of Open Access Journals (Sweden)

    R. Rüfenacht

    2012-11-01

    Full Text Available We report on the wind radiometer WIRA, a new ground-based microwave Doppler-spectro-radiometer specifically designed for the measurement of middle-atmospheric horizontal wind by observing ozone emission spectra at 142.17504 GHz. Currently, wind speeds in five levels between 30 and 79 km can be retrieved which makes WIRA the first instrument able to continuously measure horizontal wind in this altitude range. For an integration time of one day the measurement error on each level lies at around 25 m s−1. With a planned upgrade this value is expected to be reduced by a factor of 2 in the near future. On the altitude levels where our measurement can be compared to wind data from the European Centre for Medium-Range Weather Forecasts (ECMWF very good agreement in the long-term statistics as well as in short time structures with a duration of a few days has been found.

    WIRA uses a passive double sideband heterodyne receiver together with a digital Fourier transform spectrometer for the data acquisition. A big advantage of the radiometric approach is that such instruments can also operate under adverse weather conditions and thus provide a continuous time series for the given location. The optics enables the instrument to scan a wide range of azimuth angles including the directions east, west, north, and south for zonal and meridional wind measurements. The design of the radiometer is fairly compact and its calibration does not rely on liquid nitrogen which makes it transportable and suitable for campaign use. WIRA is conceived in a way that it can be operated remotely and does hardly require any maintenance.

    In the present paper, a description of the instrument is given, and the techniques used for the wind retrieval based on the determination of the Doppler shift of the measured atmospheric ozone emission spectra are outlined. Their reliability was tested using Monte Carlo simulations. Finally, a time series of 11

  10. Spatial-temporal analysis of coherent offshore wind field structures measured by scanning Doppler-lidar

    Science.gov (United States)

    Valldecabres, L.; Friedrichs, W.; von Bremen, L.; Kühn, M.

    2016-09-01

    An analysis of the spatial and temporal power fluctuations of a simplified wind farm model is conducted on four offshore wind fields data sets, two from lidar measurements and two from LES under unstable and neutral atmospheric conditions. The integral length scales of the horizontal wind speed computed in the streamwise and the cross-stream direction revealed the elongation of the structures in the direction of the mean flow. To analyse the effect of the structures on the power output of a wind turbine, the aggregated equivalent power of two wind turbines with different turbine spacing in the streamwise and cross-stream direction is analysed at different time scales under 10 minutes. The fact of considering the summation of the power of two wind turbines smooths out the fluctuations of the power output of a single wind turbine. This effect, which is stronger with increasing spacing between turbines, can be seen in the aggregation of the power of two wind turbines in the streamwise direction. Due to the anti-correlation of the coherent structures in the cross-stream direction, this smoothing effect is stronger when the aggregated power is computed with two wind turbines aligned orthogonally to the mean flow direction.

  11. Exploration of Whole Atmosphere Lidar: Mach-zehnder Receiver to Extend Fe Doppler Lidar Wind Measurements from the Thermosphere to the Ground

    Science.gov (United States)

    Smith, John A.; Chu, Xinzhao

    2016-06-01

    A receiver employing a field-widened Mach-Zehnder interferometer (MZI) is investigated for extending the wind measurement range of a narrowband Fe Doppler (372 nm) lidar from its existing measurement range in the mesosphere and lower thermosphere (MLT) down to the ground. This design uses the multiple transmitted frequencies available from the base Fe Doppler lidar in combination with an MZI receiver to make a measurement of the Doppler shift from Rayleigh-Mie scattering that is independent of aerosol backscatter ratio, temperature and pressure of the lidar volume and also independent of geometric overlap, the chopper function and any other factor affecting the signal in both MZI channels equally. A ratio is constructed from the three frequencies and two channels of the interferometer that exhibits a measurement performance of 1.75 times the Cramer-Rao lower bound, which is comparable to the dual MZI (DMZ) while preserving the insensitivity to backscatter spectrum of the quad MZI (QMZ). Using actual data obtained recently from the Fe Doppler lidar, we show the expected measurement performance of this whole atmosphere lidar instrument concept.

  12. Measurement of the Nodal Precession of WASP-33 b via Doppler Tomography

    CERN Document Server

    Johnson, Marshall C; Cameron, Andrew Collier; Bayliss, Daniel

    2015-01-01

    We have analyzed new and archival time series spectra taken six years apart during transits of the hot Jupiter WASP-33 b, and spectroscopically resolved the line profile perturbation caused by the Rossiter-McLaughlin effect. The motion of this line profile perturbation is determined by the path of the planet across the stellar disk, which we show to have changed between the two epochs due to nodal precession of the planetary orbit. We measured rates of change of the impact parameter and the sky-projected spin-orbit misalignment of $db/dt=-0.0228_{-0.0018}^{+0.0050}$ yr$^{-1}$ and $d\\lambda/dt=-0.487_{-0.076}^{+0.089}$ $^{\\circ}$ yr$^{-1}$, respectively, corresponding to a rate of nodal precession of $d\\Omega/dt=0.117_{-0.029}^{+0.012}$ $^{\\circ}$ yr$^{-1}$. This is only the second measurement of nodal precession for a confirmed exoplanet transiting a single star. Finally, we used the rate of precession to set limits on the stellar gravitational quadrupole moment of $0.0017\\leq J_2\\leq0.011$.

  13. Design and application of experimental device for Ultrasonic Doppler Effect%超声多普勒效应实验装置的设计与应用

    Institute of Scientific and Technical Information of China (English)

    李卓凡; 王小怀

    2011-01-01

    利用报废的打印机,设计制作了一套既能精确测量又有良好演示效果的多普勒效应实验装置,取得了满意的教学效果.叙述了多普勒效应测速原理,介绍了实验装置结构,给出了实验结果.%By using an unserviceable printer, an experiment device for Ultrasonic Doppler Effect is designed and manufactured. It has accurate measurement, good demonstration effect and can get satisfactory teaching results.

  14. Continuous measurements of suspended sediment loads using dual frequency acoustic Doppler profile signals

    Science.gov (United States)

    Antonini, Alessandro; Guerrero, Massimo; Rüther, Nils; Stokseth, Siri

    2016-04-01

    A huge thread to Hydropower plants (HPP) is incoming sediments in suspension from the rivers upstream. The sediments settle in the reservoir and reduce the effective head as well as the volume and reduce consequently the lifetime of the reservoir. In addition are the fine sediments causing severe damages to turbines and infrastructure of a HPP. For estimating the amount of in-coming sediments in suspension and the consequent planning of efficient counter measures, it is essential to monitor the rivers within the catchment of the HPP for suspended sediments. This work is considerably time consuming and requires highly educated personnel and is therefore expensive. Surrogate-indirect methods using acoustic and optic devices have bee developed since the last decades that may be efficiently applied for the continuous monitoring of suspended sediment loads. The presented study proposes therefore to establish a research station at a cross section of a river which is the main tributary to a reservoir of a HPP and equip this station with surrogate as well as with common method of measuring suspended load concentrations and related flow discharge and level. The logger at the research station delivers data automatically to a server. Therefore it is ensured that also large flood events are covered. Data during flood are of high interest to the HPP planners since they carried the most part of the sediment load in a hydrological year. Theses peaks can hardly be measured with common measurement methods. Preliminary results of the wet season 2015/2016 are presented. The data gives insight in the applicable range, in terms of scattering particles concentration-average size and corresponding flow discharge and level, eventually enabling the study of suspended sediment load-water flow correlations during peak events. This work is carried out as part of a larger research project on sustainable hydro power plants exposed to high sediment yield, SediPASS. SediPASS is funded by the

  15. Effect of sample volume size and sampling method on feline longitudinal myocardial velocity profiles from color tissue Doppler imaging.

    Science.gov (United States)

    Granström, Sara; Pipper, Christian Bressen; Møgelvang, Rasmus; Sogaard, Peter; Willesen, Jakob Lundgren; Koch, Jørgen

    2012-12-01

    The aims of this study were to compare the effect of sample volume (SV) size settings and sampling method on measurement variability and peak systolic (s'), and early (e') and late (a') diastolic longitudinal myocardial velocities using color tissue Doppler imaging (cTDI) in cats. Twenty cats with normal echocardiograms and 20 cats with hypertrophic cardiomyopathy. We quantified and compared empirical variance and average absolute values of s', e' and a' for three cardiac cycles using eight different SV settings (length 1,2,3 and 5 mm; width 1 and 2 mm) and three methods of sampling (end-diastolic sampling with manual tracking of the SV, end-systolic sampling without tracking, and random-frame sampling without tracking). No significant difference in empirical variance could be demonstrated between most of the tested SVs. However, the two settings with a length of 1 mm resulted in a significantly higher variance compared with all settings where the SV length exceeded 2 mm (p sampling method on the variability of measurements (p = 0.003) and manual tracking obtained the lowest variance. No difference in average values of s', e' or a' could be found between any of the SV settings or sampling methods. Within the tested range of SV settings, an SV length of 1 mm resulted in higher measurement variability compared with an SV length of 3 and 5 mm, and should therefore be avoided. Manual tracking of the sample volume is recommended. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. The Modulation of Ionospheric Alfvén Resonator on Heating HF Waves and the Doppler Effect

    Institute of Scientific and Technical Information of China (English)

    Ni Bin-bin; Zhao Zheng-yu; Xie Shu-guo

    2003-01-01

    Abstract: The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature variaof the modulation effect and lucubrate possible reasons for the field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR field, which directly inspires the formation of cross-spectrum between ULF waves and HF waves and results in spectral peaks at some gyro-frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high-speed flyer and the drifting electrons and the frequency shift from the phase variation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.

  17. Calculation of aerosol backscatter from airborne continuous wave focused CO sub 2 Doppler lidar measurements. 2. Algorithm performance

    Energy Technology Data Exchange (ETDEWEB)

    Rothermel, J. (NASA Marshall Space Flight Center, Huntsville, AL (USA)); Bowdle, D.A. (Univ. of Alabama, Huntsville (USA)); Vaughan, J.M. (Royal Signals and Radar Establishment, Worcestshire (England))

    1991-03-20

    The performance of an algorithm to calculate aerosol backscatter coefficients, from measurements with an airborne continuous wave focused CO{sub 2} Doppler lidar, is described relative to flight hardware settings and operating characteristics, and theoretical considerations. The algorithm (described in paper 1) is used to analyze measurements by the Laser True Airspeed System (LATAS), operated by the Royal Signals and Radar Establishment (RSRE) and Royal Aircraft Establishment (RAE), United Kingdom. Under optimum signal conditions, backscatter signals are located unambiguously and the backscatter coefficients are accurately determined. Under marginal or subthreshold conditions, with a degraded system sensitivity, false alarms (mistaking noise for signal) occur. Parametric studies show that the false alarm rate under these conditions depends on the search window size and the signal-to-noise ratio (SNR) threshold for valid signals. Carefully selected diagnostic parameters are used to estimate the combined sensitivity of the flight hardware system and algorithm. Less than 1% of backscatter measurements for flights over approximately 5 years have been found to be below the measurement sensitivity when the LATAS flight hardware controls were set for optimum sensitivity.

  18. Stratospheric and mesospheric wind measurements from the new WIRA-C wind radiometer and comparison to the Doppler lidar on La Réunion island

    Science.gov (United States)

    Hagen, Jonas; Kämpfer, Niklaus; Khaykin, Sergey; Hauchecorne, Alain

    2017-04-01

    Measurements of wind speeds in altitudes between 30 and 70 km are surprisingly rare. Passive microwave radiometry and Doppler lidar techniques provide two methods for covering this gap region. With the Rayleigh-Mie Doppler wind lidar of CNRS/INSU (Guyancourt, France) and OSUR (La Réunion, France) and the passive microwave radiometer WIRA-C of the IAP (Bern, Switzerland) two such instruments are collocated in the Maïdo observatory on the tropical island La Réunion (21° South, France). Both instruments participate in the ARISE2 project that is funded by the European Commission Horizon 2020. The Rayleigh-Mie Doppler wind lidar is an active sounder, measuring the Doppler shift of backscattered visible light and can provide wind profiles from 5 up to 50 km with a vertical resolution of up to 100 m and an accuracy better than 1 m- s up to 30 km. On the other side, WIRA-C is a passive microwave radiometer that measures the Doppler shift of the ozone thermal emission line at 142 GHz. The radiometer has a high spectral resolution of 12.2 kHz and a band width of 200 MHz and can thus exploit the pressure broadening of the ozone line to retrieve an altitude resolved wind profile. The retrieval is based on a model of the atmosphere and optimal estimation techniques implemented by ARTS and Atmlab/Qpack, but in contrast to previous versions the atmospheric model is three-dimensional. Meaningful wind speeds can be retrieved for an altitude range of 30 to 70 km with a vertical resolution of up to 4 km. WIRA-C is able to measure continuously, independent of daylight and clouds. WIRA-C has been installed on the Maïdo observatory in August 2016 and has measured since then whenever the optical thickness of the atmosphere was low enough. The Doppler lidar at Maïdo was operated on a campaign basis since 2013 and routinely twice a week since September 2015. We present the WIRA-C instrument and its measurement results for the tropical summer 2016/17 and compare them to coincident

  19. Transcranial measurement of blood velocities in the basal cerebral arteries using pulsed Doppler ultrasound: a method of assessing the Circle of Willis.

    Science.gov (United States)

    Padayachee, T S; Kirkham, F J; Lewis, R R; Gillard, J; Hutchinson, M C; Gosling, R G

    1986-01-01

    Transcranial pulsed Doppler ultrasound and spectral analysis were used for detection of blood velocities in the basal cerebral arteries. The Doppler transducer was placed superior to the zygomatic arch and during insonation of the middle cerebral artery care was taken to obtain maximum Doppler-shift frequency signals since this allowed a small angle between the ultrasound beam and this artery. Doppler signals were obtained from the middle, anterior, and posterior cerebral arteries in 20 volunteers with the average depth of the Doppler gate at 4.9 (4.6-5.2 cm), 5.2 (4.9-5.4 cm), and 6.3 cm (6.0-6.9 cm), respectively. These measurements were in agreement with those obtained for 15 cadaver studies, in whom the distance from the proposed site of the Doppler transducer to each basal cerebral artery was measured as 4.7 +/- 0.6, 5.3 +/- 0.5, and 5.9 +/- 0.9 cm, respectively. The reproducibility of middle cerebral artery blood velocity values was tested in seven subjects and showed a variation of not more than 8% in any individual. The method was used in combination with common carotid compression to assess four patients who had occlusive extracranial carotid disease; in three the disease was more severe on one side and reversal of blood flow in the proximal ipsilateral anterior cerebral artery was demonstrated, consistent with cross flow from the contralateral side via the anterior communicating artery of the Circle of Willis. In the fourth patient augmentation of posterior cerebral artery blood velocities during common carotid compression indicated the major collateral source was from the vertebrobasilar system.

  20. Path-length distribution and path-length-resolved Doppler measurements of multiply scattered photons by use of low-coherence interferometry

    NARCIS (Netherlands)

    Petoukhova, Anna; Steenbergen, Wiendelt; de Mul, F.F.M.

    2001-01-01

    We report first results of measurements by low-coherence Doppler interferometry of the path-length distribution of photons undergoing multiple scattering in a highly turbid medium. We use a Mach–Zehnder interferometer with multimode graded-index fibers and a superluminescent diode as the light sourc

  1. Doppler Ultrasound: What Is It Used for?

    Science.gov (United States)

    ... in your neck (carotid artery stenosis) A Doppler ultrasound can estimate how fast blood flows by measuring the rate of change in its pitch (frequency). During a Doppler ultrasound, a technician trained in ultrasound imaging (sonographer) presses ...

  2. Speckles in laser doppler perfusion imaging

    NARCIS (Netherlands)

    Rajan, Vinayakrishnan

    2007-01-01

    Laser Doppler Flowmetry (LDF) is a noninvasive diagnostic method to measure blood flow in tissue [1]. The technique is based on measuring the Doppler shift induced by moving red blood cells to the illuminating coherent light. A laser Doppler instrument often gives output signals related to the flux,

  3. Calibrating airborne measurements of airspeed, pressure and temperature using a Doppler laser air-motion sensor

    Directory of Open Access Journals (Sweden)

    W. A. Cooper

    2014-09-01

    Full Text Available A new laser air-motion sensor measures the true airspeed with a standard uncertainty of less than 0.1 m s−1 and so reduces uncertainty in the measured component of the relative wind along the longitudinal axis of the aircraft to about the same level. The calculated pressure expected from that airspeed at the inlet of a pitot tube then provides a basis for calibrating the measurements of dynamic and static pressure, reducing standard uncertainty in those measurements to less than 0.3 hPa and the precision applicable to steady flight conditions to about 0.1 hPa. These improved measurements of pressure, combined with high-resolution measurements of geometric altitude from the global positioning system, then indicate (via integrations of the hydrostatic equation during climbs and descents that the offset and uncertainty in temperature measurement for one research aircraft are +0.3 ± 0.3 °C. For airspeed, pressure and temperature, these are significant reductions in uncertainty vs. those obtained from calibrations using standard techniques. Finally, it is shown that although the initial calibration of the measured static and dynamic pressures requires a measured temperature, once calibrated these measured pressures and the measurement of airspeed from the new laser air-motion sensor provide a measurement of temperature that does not depend on any other temperature sensor.

  4. The classical Doppler effect as a rendezvous problem; 3D case

    OpenAIRE

    Di Rocco, Hector Omar

    2016-01-01

    En este trabajo se deriva la fórmula para el corrimiento Doppler como si tratásemos un problema de encuentro, unificando todos los posibles movimientos relativos entre la fuente y el observador We derive the classical Doppler shift formula as a rendezvous problem, unifying all possible relative movements between the source and the observer Fil: Di Rocco, Hector Omar. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de Ciencias Exactas. Instituto de Fisica Arroyo...

  5. Simultaneous ground-based thermospheric wind measurements using Doppler asymmetric spatial heterodyne spectroscopy (DASH) and Fabry-Perot Interferometry

    Science.gov (United States)

    Englert, C. R.; Harlander, J. M.; Meriwether, J. W.; Brown, C. M.; Drob, D. P.; Emmert, J. T.; Castelaz, M.; Roesler, F. L.

    2011-12-01

    The concept of Doppler Asymmetric Spatial Heterodyne (DASH) instruments to measure upper atmospheric winds was initially published in 2006. The DASH approach is identical to the concept of Spatial Heterodyne Spectroscopy (SHS) except that one interferometer arm includes an additional fixed optical path offset, similar to the phase stepping Michelson technique which was used for the WINDII (Wind Imaging Interferometer) experiment. The advantages of DASH include having no moving parts, high sensitivity, and the ability to simultaneously observe multiple isolated emission lines, including a known light source for real time calibration. Since it was first proposed, the development of the DASH technique has progressed significantly. Major milestones include a proof of concept in the laboratory, the design, fabrication and test of a monolithic DASH interferometer for the thermospheric red line (O I 630nm), and initial ground based thermospheric wind measurements using this interferometer. To further increase the technical readiness level (TRL) of DASH for a future satellite instrument, we have conducted coordinated measurements with a DASH prototype and Fabry-Perot interferometer (FPI) from the Pisgah Astronomical Research Institute in North Carolina in the summer of 2011. We will present a comparison of the two experimental data sets and examine how they compare with the empirical horizontal wind model HWM-07.

  6. Preliminary measurements of the edge magnetic field pitch from 2-D Doppler backscattering in MAST and NSTX-U (invited)

    Science.gov (United States)

    Vann, R. G. L.; Brunner, K. J.; Ellis, R.; Taylor, G.; Thomas, D. A.

    2016-11-01

    The Synthetic Aperture Microwave Imaging (SAMI) system is a novel diagnostic consisting of an array of 8 independently phased antennas. At any one time, SAMI operates at one of the 16 frequencies in the range 10-34.5 GHz. The imaging beam is steered in software post-shot to create a picture of the entire emission surface. In SAMI's active probing mode of operation, the plasma edge is illuminated with a monochromatic source and SAMI reconstructs an image of the Doppler back-scattered (DBS) signal. By assuming that density fluctuations are extended along magnetic field lines, and knowing that the strongest back-scattered signals are directed perpendicular to the density fluctuations, SAMI's 2-D DBS imaging capability can be used to measure the pitch of the edge magnetic field. In this paper, we present preliminary pitch angle measurements obtained by SAMI on the Mega Amp Spherical Tokamak (MAST) at Culham Centre for Fusion Energy and on the National Spherical Torus Experiment Upgrade at Princeton Plasma Physics Laboratory. The results demonstrate encouraging agreement between SAMI and other independent measurements.

  7. Local Doppler Effect, Index of Refraction through the Earth Crust, PDF and the CNGS Neutrino Anomaly?

    Directory of Open Access Journals (Sweden)

    Assis A. V. D. B.

    2012-04-01

    Full Text Available In this brief paper, we show the neutrino velocity discrepancy obtained in the OPERA experiment may be due to the local Doppler effect between a local clock attached to a given detector at Gran Sasso, say C G , and the respective instantaneous clock crossing C G , say C C , being this latter at rest in the instantaneous inertial frame having got the velocity of rotation of CERN about Earth’s axis in relation to the fixed stars. With this effect, the index of refraction of the Earth crust may accomplish a refractive effect by which the neutrino velocity through the Earth crust turns out to be small in relation to the speed of light in the empty space, leading to an encrusted discrepancy that may have contamined the data obtained from the block of detectors at Gran Sasso, leading to a time interval excess that did not provide an exact match between the shift of the protons PDF (probability distribution function by TOF c and the detection data at Gran Sasso via the maximum likelihood matching.

  8. Acoustic Doppler current profiler raw measurements on the Missouri and Yellowstone rivers, 2000-2016, Columbia Environmental Research Center

    Science.gov (United States)

    Bulliner, Edward A.; Elliott, Caroline M.; Jacobson, Robert B.

    2017-01-01

    Between the years 2000 and 2016, scientists and technicians from the U.S. Geological Survey (USGS) Columbia Environmental Research Center (CERC) have collected over 400 field-days worth of acoustic Doppler current profiler (ADCP) measurements on the Missouri and Yellowstone Rivers, primarily for the purposes of assessing physical aquatic habitat for the pallid sturgeon. Scientists and technicians collected data using boat-mounted Teledyne Rio Grande ADCPs, which were processed using customized scripting tools and archived in standardized formats. To assess longitudinal variability in depth and velocity distributions along the Missouri River, as well as compare the Missouri River to its unaltered analog, the Yellowstone River, we compiled the collected datasets into a single comma-separated value (csv) file using a series of data-processing scripts written in Python. To allow for the comparison of measurements collected only within a specific window of flow exceedance, we conducted geospatial analyses to attribute each ADCP measurement by a discharge from the most relevant USGS gage location (with the most relevant gage location being the gage located between the same major tributaries as the measurement, even if it was not the closest spatially), and assigned each measurement a flow exceedance percentile based on the relevant gage's record between 2000 and 2016. We also conducted general quality control on the data, discarding any ADCP returns where the ADCP measured a depth-averaged velocity greater than 3 meters per second or a depth greater than 16 meters; these values were considered to be an approximate upper bounds for realistic values on the Missouri and Yellowstone Rivers. The presented csv file lists individual ADCP bins for all measurements that have been archived between 2000 and 2016 by CERC scientists along with their three-dimensional velocity components, depth-averaged velocity magnitude for a given ADCP return, average channel depth for a given ADCP

  9. General principles of carotid Doppler ultrasonography

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Whal [Dept. of Radiology, Seoul National University College of Medicine, Seoul (Korea, Republic of)

    2014-03-15

    Carotid Doppler ultrasonography is a popular tool for evaluating atherosclerosis of the carotid artery. Its two-dimensional gray scale can be used for measuring the intima-media thickness, which is very good biomarker for atherosclerosis and can aid in plaque characterization. The plaque morphology is related to the risk of stroke. The ulceration of plaque is also known as one of the strong predictors of future embolic event risk. Color Doppler ultrasonography and pulse Doppler ultrasonography have been used for detecting carotid artery stenosis. Doppler ultrasonography has unique physical properties. The operator should be familiar with the physics and other parameters of Doppler ultrasonography to perform optimal Doppler ultrasonography studies.

  10. Hyperfine structure effects in Doppler-broadening thermometry on water vapor at 1.4 μm

    Science.gov (United States)

    Domenica De Vizia, Maria; Odintsova, Tatyana; Gianfrani, Livio

    2016-04-01

    This article builds upon a previous work dealing with the budget of uncertainties associated to our recent determination of the Boltzmann constant by means of Doppler broadening thermometry. We report on the outcomes of theoretical calculations and numerical simulations aimed to precisely quantify the influence of the unresolved hyperfine structure of a given ortho component of the \\text{H}218 O spectrum at 1.4 μm on the measurement of the Doppler width of the line itself. We have found that, if the hyperfine structure of the {{4}4,1}\\to {{4}4,0} line of the {ν1}+{ν3} band was ignored, the spectroscopic measurement of the Boltzmann constant would be affected by a relative systematical deviation of 4\\cdot {{10}-8} .

  11. Measurement of angular divergence and ion species ratios of an rf-driven multicusp ion source for diagnostic neutral beam by Doppler shift spectroscopy

    Science.gov (United States)

    Yoo, S. J.; Yang, H. L.; Hwang, S. M.

    2000-03-01

    The ion species ratios as well as the angular divergences are measured by using a Doppler shift spectroscopy of Hα spectral lines, which originate from several different ions, such as H2+ and H3+ as well as H+, and are spectrally well resolvable from each other on the measured spectral window of detection system. The angular divergences of the ion beam components are determined from the linewidths of the measured emission lines, and the ratio of mixed species is deduced from the intensity ratio of each peak. The ion species ratios measured by the Doppler shift spectroscopy are cross checked by a mass analyzing magnet. The measurements are performed varying the input rf power and the operating source pressure.

  12. Doppler imaging

    Energy Technology Data Exchange (ETDEWEB)

    Piskunov, N [Department of Physics and Astronomy, Uppsala University, Box 515, S-75120 Uppsala (Sweden)], E-mail: piskunov@fysast.uu.se

    2008-12-15

    In this paper, I present a short review of the history and modern status of Doppler imaging techniques, highlighting their dependence on the knowledge of the fundamental stellar parameters, the quality of stellar atmospheric models and the accuracy of spectral synthesis.

  13. Elastic compression treatment of chronic superficial venous insufficiency of the lower limbs based on Doppler venous pressure index measurements

    Directory of Open Access Journals (Sweden)

    Leonardo Corcos

    2015-03-01

    Full Text Available Ineffectiveness or discomfort from graduated elastic compression stockings (GES in patients with chronic venous insufficiency (CVI and/or varicose veins of the lower limbs (VVLL can depend of inappropriate counter pressure applied. Counter pressure was calculated by Doppler venous pressure index (VPI. The aim of this study was to verify the value VPI in the choice of GES. A total of 1212 LL of 606 patients subjected to VPI measurements VPI correlated with the various sites of reflux (R and C of Clinical-Etiology-Anatomy-Pathophysiology (CEAP classification. The difference between standing VPI the and normal values=counter pressure to be applied by GES. Questionnaire to 96 patients with CVI/VVLL wearing GES. Mean VPI values: greater saphenous (GSV>smaller saphenous; GSV with isolated venous reflux (R at the leg>GSV at the thigh; additional R in perforators increases VPI in all the districts; superficial R increases VPI in PT. Relation between VPI/C of CEAP: P<0.05-0.0001; 81/83/96 (97.5% patients improved; 0 complained. R in GSV at the leg and in perforators increases VPI in deep veins. Few discrepancies VPI/CEAP can be expected. Standing VPI is highly predictive. The best choice of GES can be based on the VPI measurement.

  14. Ultrasound colour Doppler measurements in a single joint as measure of disease activity in patients with rheumatoid arthritis--assessment of concurrent validity

    DEFF Research Database (Denmark)

    Ellegaard, K; Torp-Pedersen, S; Terslev, L;

    2009-01-01

    OBJECTIVE: Colour Doppler ultrasound (CDU) displays blood flow in the tissues and is able to detect hyperaemia. Because hyperaemia is part of the inflammatory response, the amount of CDU activity in the inflamed synovium may be used to quantify the inflammatory activity in RA. It has never been...... investigated if the amount of CDU activity in a single joint can be used to quantify disease activity in RA. METHODS: A total of 109 patients with RA and affection of the wrist joint underwent a standardized CDU examination assessing three positions in their most affected wrist at start up in biological...... treatment. On the same day the following measures of disease activity were collected: assessment of the number of tender and swollen joints, CRP, ESR and 28-joint disease activity score (DAS28). The amount of CDU activity was quantified by measuring the percentage of colour in the synovium--the colour...

  15. Optical Doppler shift with structured light.

    Science.gov (United States)

    Belmonte, Aniceto; Torres, Juan P

    2011-11-15

    When a light beam with a transverse spatially varying phase is considered for optical remote sensing, in addition to the usual longitudinal Doppler frequency shift of the returned signal induced by the motion of the scatter along the beam axis, a new transversal Doppler shift appears associated to the motion of the scatterer in the plane perpendicular to the beam axis. We discuss here how this new effect can be used to enhance the current capabilities of optical measurement systems, adding the capacity to detect more complex movements of scatters.

  16. Influence of recent exercise and skin temperature on ultrasound Doppler measurements in patients with rheumatoid arthritis - an intervention study

    DEFF Research Database (Denmark)

    Ellegaard, Karen; Torp-Pedersen, Søren; Henriksen, Marius

    2009-01-01

    before and after each intervention were compared to see if any intervention affected the amount of Doppler in the synovium. RESULTS: The CF decreased significantly after cooling of the hand (P = 0.018 and

  17. A Cramer Rao analysis on receiver placement in a FM band commensal radar system based on doppler only measurements

    CSIR Research Space (South Africa)

    Maasdorp, FDV

    2014-10-01

    Full Text Available This paper investigates the theoretical placement of receivers in an Commensal Radar (CR), Doppler only tracking system with a single transmitter multiple receiver configuration. Theory, based on the Fisher Information matrix (FIM), is developed...

  18. Assimilative model for ionospheric dynamics employing delay, Doppler, and direction of arrival measurements from multiple HF channels

    Science.gov (United States)

    Fridman, Sergey V.; Nickisch, L. J.; Hausman, Mark; Zunich, George

    2016-03-01

    We describe the development of new HF data assimilation capabilities for our ionospheric inversion algorithm called GPSII (GPS Ionospheric Inversion). Previously existing capabilities of this algorithm included assimilation of GPS total electron content data as well as assimilation of backscatter ionograms. In the present effort we concentrated on developing assimilation tools for data related to HF propagation channels. Measurements of propagation delay, angle of arrival, and the ionosphere-induced Doppler from any number of known propagation links can now be utilized by GPSII. The resulting ionospheric model is consistent with all assimilated measurements. This means that ray tracing simulations of the assimilated propagation links are guaranteed to be in agreement with measured data within the errors of measurement. The key theoretical element for assimilating HF data is the raypath response operator (RPRO) which describes response of raypath parameters to infinitesimal variations of electron density in the ionosphere. We construct the RPRO out of the fundamental solution of linearized ray tracing equations for a dynamic magnetoactive plasma. We demonstrate performance and internal consistency of the algorithm using propagation delay data from multiple oblique ionograms (courtesy of Defence Science and Technology Organisation, Australia) as well as with time series of near-vertical incidence sky wave data (courtesy of the Intelligence Advanced Research Projects Activity HFGeo Program Government team). In all cases GPSII produces electron density distributions which are smooth in space and in time. We simulate the assimilated propagation links by performing ray tracing through GPSII-produced ionosphere and observe that simulated data are indeed in agreement with assimilated measurements.

  19. Steerable Doppler transducer probes

    Energy Technology Data Exchange (ETDEWEB)

    Fidel, H.F.; Greenwood, D.L.

    1986-07-22

    An ultrasonic diagnostic probe is described which is capable of performing ultrasonic imaging and Doppler measurement consisting of: a hollow case having an acoustic window which passes ultrasonic energy and including chamber means for containing fluid located within the hollow case and adjacent to a portion of the acoustic window; imaging transducer means, located in the hollow case and outside the fluid chamber means, and oriented to direct ultrasonic energy through the acoustic window toward an area which is to be imaged; Doppler transducer means, located in the hollow case within the fluid chamber means, and movably oriented to direct Doppler signals through the acoustic window toward the imaged area; means located within the fluid chamber means and externally controlled for controllably moving the Doppler transducer means to select one of a plurality of axes in the imaged area along which the Doppler signals are to be directed; and means, located external to the fluid chamber means and responsive to the means for moving, for providing an indication signal for identifying the selected axis.

  20. Investigation of a field-widened Mach-Zehnder receiver to extend Fe Doppler lidar wind measurements from the thermosphere to the ground.

    Science.gov (United States)

    Smith, John A; Chu, Xinzhao

    2016-02-20

    A receiver employing a field-widened Mach-Zehnder interferometer (MZI) is investigated for extending the wind measurement range of a narrow-band Fe Doppler lidar operating at 372 nm from its existing measurement range in the mesosphere and lower thermosphere (MLT) down to near the ground. This design uses the multiple transmitted frequencies available from the base Fe Doppler lidar in combination with a novel MZI receiver to make a measurement of the Doppler shift that rejects the influence of atmospheric parameters such as the aerosol backscatter ratio, temperature, and pressure of the lidar volume and receiver parameters such as the geometric overlap, the chopper function, and any other factor affecting the proportion of the signal in both channels of the MZI equally. A ratio is constructed from the three frequencies and two channels of the interferometer that exhibits a measurement performance of 1.75 times the Cramer-Rao lower bound, which is comparable to the dual MZI (DMZ) while preserving the insensitivity to backscatter spectrum of the quad MZI (QMZ). In addition, we show how the use of multiple transmitted frequencies can yield a wind measurement wherein the accuracy is insensitive to the optical imperfection and misalignment of the MZI or any other factor that affects the contrast, though the precision is still impacted by the fringe contrast. Simply adding a second surface mirror of a particular thickness to the basic tilted MZI can allow the field of the MZI to be widened sufficiently for most resonance Doppler lidar receivers in operation today. Provided that the detection sensitivity in each channel is known, the original resonance fluorescence and Rayleigh scattering signals can be recovered by simply scaling and adding the contributions from both channels. Consequently, the wind and temperature from the MLT region and the temperature from the Rayleigh region can be derived alongside the Rayleigh Doppler wind measurement without compromising the

  1. Percutaneous penetration of methyl nicotinate from ointments using the laser Doppler technique: bioequivalence and enhancer effects.

    Science.gov (United States)

    Remane, Yvonne; Leopold, Claudia S; Maibach, Howard I

    2006-12-01

    Laser Doppler flowmetry (LDF) may be used to quantify erythema response as a result of an increased cutaneous microcirculation induced by methyl nicotinate (MN). Bioequivalence of a test and a standard preparation (vehicles: light mineral oil and medium chain triglycerides, respectively) was confirmed according to the pilot study of the FDA Guidance for Industry "Topical dermatologic corticosteroids: In Vivo bioequivalence" applying the staggered application and synchronized removal method for one defined concentration. Furthermore, the influence of penetration enhancers (5% w/w Dimethylsulfoxide (DMSO) and 10% w/w diethylene glycol monoethyl ether) on MN penetration was investigated. It was shown that DMSO and diethylene glycol monoethyl ether altered cutaneous microcirculation and thus MN penetration in comparison to the standard formulation. However, true penetration enhancement could only be proved with diethylene glycol monoethyl ether resulting from an improved drug solubility in the skin which was confirmed by attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR). Increased MN penetration by DMSO was only caused by thermodynamic effects, i.e. a decreased drug solubility in the vehicle.

  2. Effects of Mitral Balloon Valvuloplasty on Left Ventricular Systolic Functions: Assessment with Color Tissue Doppler

    Directory of Open Access Journals (Sweden)

    Cevat Kırma

    2010-04-01

    Full Text Available Objective: Left ventricular (LV systolic functions are generally depressed in Mitral Stenosis (MS. Recovery of LV systolic functions demonstrated with 2D echocardiography in some patients by mitral balloon valvuloplasty (MBV. Systolic mitral annular velocity (S' by Tissue Doppler Imaging (TDI predicts LV systolic function. We aimed to evaluate early effects of MBV on LV systolic function by TDI.Methods: Forty-eight consecutive patients included to the study (39 female, 36±10 years. A full transthoracic echocardiographic study (TTE including left ventricular ejection fraction assessment by teicholz method and mitral annular color TDI assessment was performed 24 hours before and after MBV in all patients. MBV performed by Inoue technique under guidance of TTE. Analysis of mitral lateral annular S' wave velocity was performed immediately after echocardiographic examination. Results: MBV performed successfully in 43 patients (Group A, and severe mitral regurgitation developed in 5 patients(Group B. Mitral valve area, and S’ wave velocity increased, mean and maximum mitral gradient, and left atrial diameter, and systolic pulmonary artery pressure (PAP were reduced significantly by MBV in group A patients (p<0.01, =0.046, <0.01, <0.01, <0.01, <0.01, respectively. But, only mitral valve area increased significantly ingroup B patients (p<0.01. LVEF by teicholz did not change significantly in both groups. Conclusion: Improvements of LV systolic functions after successfull MBV can easily showed by color TDI where2D echocardiography could not indicate.

  3. Embedded Fiber Optic Probes to Measure Detonation Velocities Using the Photonic Doppler Velocimeter

    Energy Technology Data Exchange (ETDEWEB)

    Hare, D E; Holtkamp, D B; Strand, O T

    2010-03-02

    Detonation velocities for high explosives can be in the 7 to 8 km/s range. Previous work has shown that these velocities may be measured by inserting an optical fiber probe into the explosive assembly and recording the velocity time history using a Fabry-Perot velocimeter. The measured velocity using this method, however, is the actual velocity multiplied times the refractive index of the fiber core, which is on the order of 1.5. This means that the velocimeter diagnostic must be capable of measuring velocities as high as 12 km/s. Until recently, a velocity of 12 km/s was beyond the maximum velocity limit of a homodyne-based velocimeter. The limiting component in a homodyne system is usually the digitizer. Recently, however, digitizers have come on the market with 20 GHz bandwidth and 50 GS/s sample rate. Such a digitizer coupled with high bandwidth detectors now have the total bandwidth required to make velocity measurements in the 12 km/s range. This paper describes measurements made of detonation velocities using a high bandwidth homodyne system.

  4. Doppler radar physiological sensing

    CERN Document Server

    Lubecke, Victor M; Droitcour, Amy D; Park, Byung-Kwon; Singh, Aditya

    2016-01-01

    Presents a comprehensive description of the theory and practical implementation of Doppler radar-based physiological monitoring. This book includes an overview of current physiological monitoring techniques and explains the fundamental technology used in remote non-contact monitoring methods. Basic radio wave propagation and radar principles are introduced along with the fundamentals of physiological motion and measurement. Specific design and implementation considerations for physiological monitoring radar systems are then discussed in detail. The authors address current research and commercial development of Doppler radar based physiological monitoring for healthcare and other applications.

  5. Physical model experiment for wave field measurements by means of laser Doppler vibrometer. Measurement of three components; Laser Doppler shindokei ni yoru butsuri model jikken. Hado sanseibun no kenshutsu

    Energy Technology Data Exchange (ETDEWEB)

    Nishizawa, O.; Sato, T. [Geological Survey of Japan, Tsukuba (Japan); Lei, X. [DIA Consultant Co. Ltd., Tokyo (Japan)

    1997-05-27

    In this experiment, a beam incident from an oblique direction is reflected by a spherical lens toward the direction of incidence. When the surface of a matter is vibrated by elastic waves, the spherical lens comes into a translation motion that accompanies the vibration. It follows accordingly that the vibration on the surface of the matter may be detected by sensing the spherical lens travelling speed. Three components of the vibration may be determined if beams are focused at one spot from three directions. Detection of the S-wave component by LDV (laser Doppler vibrometer) discloses the complicated wave field in a heterogeneous material, and this physical model experiment may be utilized in various fields of study. For instance, information about problems that may surface in the field work may be collected beforehand in a physical model experiment for developing an S-wave-aided probing method. For the study of seismic wave propagation in a complicated three-dimensional ground structure, a numerical model is not enough, and a physical model experiment will be an effective method to fulfill the purpose. In the monitoring of cracks in a rock, again, not only elastic wave velocity but also waveform information collected from a physical model experiment should be fully utilized. 6 refs., 6 figs.

  6. Effects of respiratory manoeuvres on hepatic vein Doppler waveform and flow velocities in a healthy population

    Energy Technology Data Exchange (ETDEWEB)

    Altinkaya, Naime, E-mail: naimeto@yahoo.com [Department of Radiology, Baskent University Medical School, Adana (Turkey); Baskent University, Faculty of Medicine, Department of Radiology, Adana (Turkey); Koc, Zafer, E-mail: koczafer@gmail.com [Department of Radiology, Baskent University Medical School, Adana (Turkey); Baskent University, Faculty of Medicine, Department of Radiology, Adana (Turkey); Ulusan, Serife, E-mail: sulusan@hotmail.com [Department of Radiology, Baskent University Medical School, Adana (Turkey); Baskent University, Faculty of Medicine, Department of Radiology, Adana (Turkey); Demir, Senay, E-mail: drsenaydemir@hotmail.com [Department of Radiology, Baskent University Medical School, Adana (Turkey); Baskent University, Faculty of Medicine, Department of Radiology, Adana (Turkey); Gurel, Kamil, E-mail: kamilgurel@hotmail.com [Department of Radiology, Baskent University Medical School, Adana (Turkey); Baskent University, Faculty of Medicine, Department of Radiology, Adana (Turkey)

    2011-07-15

    Objective: This study was performed to determine the variations in Doppler waveforms and flow velocity during respiratory manoeuvres in healthy individuals with no liver disease. Materials and methods: In total, 100 individuals (75 women and 25 men) without known cardiac or liver disease were examined prospectively with duplex Doppler ultrasonography (US). We recorded the Doppler waveforms and peak systolic velocities (V{sub max}) of the middle hepatic vein during normal respiration, during breath-holding after quiet expiration and also during deep inspiration. Doppler waveforms are categorised as triphasic, biphasic or monophasic. Results: During normal respiration, hepatic venous waveforms were triphasic in 93% of subjects, monophasic in 6% and biphasic in 1%. During breath-holding after quiet expiration, the percentages were 91%, 6% and 3%, respectively. During deep inspiration, they were 80%, 18% and 2%, respectively. Although significant differences were noted between rates during deep inspiration and normal respiration, they were quite similar during normal respiration and breath-holding after quiet expiration (P < 0.05). The values of V{sub max} were significantly higher during normal respiration compared to quiet expiration and during quiet expiration compared to deep inspiration (P < 0.05). Conclusion: The velocities and waveforms of hepatic veins varied during respiratory manoeuvres. The status of respiration must be taken into consideration whilst examining the hepatic vein waveforms and velocities with duplex Doppler US.

  7. Laser Doppler measurements of laminar and turbulent flow in a pipe bend

    Science.gov (United States)

    Enayet, M. M.; Gibson, M. M.; Taylor, A. M. K. P.; Yianneskis, M.

    1982-01-01

    The streamwise components of velocity in the flow through a ninety degree bend of circular cross section for which the ratio of radius of curvature to diameter is 2.8 were measured. The development of strong pressure driven secondary flow in the form of a pair of counter rotating vortices in the steamwise direction is shown. Refractive index matching at the fluid wall interface was not employed; the displacement of the measurement volume due to refraction is allowed for in simple geometrical calculations.

  8. Quantifying acoustic doppler current profiler discharge uncertainty: A Monte Carlo based tool for moving-boat measurements

    Science.gov (United States)

    Mueller, David S.

    2017-01-01

    This paper presents a method using Monte Carlo simulations for assessing uncertainty of moving-boat acoustic Doppler current profiler (ADCP) discharge measurements using a software tool known as QUant, which was developed for this purpose. Analysis was performed on 10 data sets from four Water Survey of Canada gauging stations in order to evaluate the relative contribution of a range of error sources to the total estimated uncertainty. The factors that differed among data sets included the fraction of unmeasured discharge relative to the total discharge, flow nonuniformity, and operator decisions about instrument programming and measurement cross section. As anticipated, it was found that the estimated uncertainty is dominated by uncertainty of the discharge in the unmeasured areas, highlighting the importance of appropriate selection of the site, the instrument, and the user inputs required to estimate the unmeasured discharge. The main contributor to uncertainty was invalid data, but spatial inhomogeneity in water velocity and bottom-track velocity also contributed, as did variation in the edge velocity, uncertainty in the edge distances, edge coefficients, and the top and bottom extrapolation methods. To a lesser extent, spatial inhomogeneity in the bottom depth also contributed to the total uncertainty, as did uncertainty in the ADCP draft at shallow sites. The estimated uncertainties from QUant can be used to assess the adequacy of standard operating procedures. They also provide quantitative feedback to the ADCP operators about the quality of their measurements, indicating which parameters are contributing most to uncertainty, and perhaps even highlighting ways in which uncertainty can be reduced. Additionally, QUant can be used to account for self-dependent error sources such as heading errors, which are a function of heading. The results demonstrate the importance of a Monte Carlo method tool such as QUant for quantifying random and bias errors when

  9. Comparison of bottom-track to global positioning system referenced discharges measured using an acoustic Doppler current profiler

    Science.gov (United States)

    Wagner, C.R.; Mueller, D.S.

    2011-01-01

    A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) can be caused by the movement of sediment on or near the streambed. The integration of a global positioning system (GPS) to track the movement of the ADCP can be used to avoid the systematic negative bias associated with a moving streambed. More than 500 discharge transects from 63 discharge measurements with GPS data were collected at sites throughout the US, Canada, and New Zealand with no moving bed to compare GPS and bottom-track-referenced discharges. Although the data indicated some statistical bias depending on site conditions and type of GPS data used, these biases were typically about 0.5% or less. An assessment of differential correction sources was limited by a lack of data collected in a range of different correction sources and different GPS receivers at the same sites. Despite this limitation, the data indicate that the use of Wide Area Augmentation System (WAAS) corrected positional data is acceptable for discharge measurements using GGA as the boat-velocity reference. The discharge data based on GPS-referenced boat velocities from the VTG data string, which does not require differential correction, were comparable to the discharges based on GPS-referenced boat velocities from the differentially-corrected GGA data string. Spatial variability of measure discharges referenced to GGA, VTG and bottom-tracking is higher near the channel banks. The spatial variability of VTG-referenced discharges is correlated with the spatial distribution of maximum Horizontal Dilution of Precision (HDOP) values and the spatial variability of GGA-referenced discharges is correlated with proximity to channel banks. ?? 2011 Published by Elsevier B.V.

  10. Windscanner: 3-D wind and turbulence measurements from three steerable doppler lidars

    DEFF Research Database (Denmark)

    Mikkelsen, Torben; Mann, Jakob; Courtney, Michael

    2008-01-01

    At RISO DTU we has started to build a new-designed laser-based lidar scanning facility for detailed remote measurements of the wind fields engulfing the huge wind turbines of today. Our aim is to measure in real-time 3D wind vector data at several hundred points every second: 1) upstream of the t......At RISO DTU we has started to build a new-designed laser-based lidar scanning facility for detailed remote measurements of the wind fields engulfing the huge wind turbines of today. Our aim is to measure in real-time 3D wind vector data at several hundred points every second: 1) upstream...... of the turbine, 2) near the turbine, and 3) in the wakes of the turbine rotors. Our first proto-type Windscanner is now being built from three commercially available Continuous Wave (CW) wind lidars modified with fast adjustable focus length and equipped with 2-D prism-based scan heads, in conjunction...

  11. Doppler-shift attenuation method lifetime measurements in {sup 115}Sb and {sup 117}Sb

    Energy Technology Data Exchange (ETDEWEB)

    Bucurescu, D.; Cata-Danil, I.; Ilas, G.; Ivascu, M.; Stroe, L.; Ur, C.A. [Institute of Atomic Physics, P.O. Box MG-6, Bucharest 76900 (Romania)

    1995-08-01

    The lifetimes of several low-lying excited levels in {sup 115}Sb and {sup 117}Sb have been measured by using the DSA method in the {sup 115,117}Sn({ital p},{ital n}{gamma}){sup 115,117}Sb reactions, respectively. The structure of these nuclei is discussed in the frame of the interacting boson-fermion model.

  12. Drop weight impact strength measurement method for porous concrete using laser doppler velocimetry

    NARCIS (Netherlands)

    Agar-Ozbek, A.S.; Weerheijm, J.; Schlangen, E.; Breugel, K. van

    2012-01-01

    In this study, an experimental configuration that reveals the dynamic response of porous concretes in a drop weight impact test was introduced. Through the measurement of particle velocity at the interface, between the impactor and the concrete target, the dynamic response was obtained in an easily

  13. Micro-Doppler Analysis of Small UAVs

    NARCIS (Netherlands)

    Wit, J.J.M. de; Harmanny, R.I.A.; Prémel Cabic, G.

    2012-01-01

    Coherent radar measures micro-Doppler properties of moving objects. The micro-Doppler signature depends on parts of an object moving and rotating in addition to the main body motion (e.g. rotor blades) and is therefore characteristic for the type of object. In this study, the micro-Doppler signature

  14. Micro-Doppler Analysis of Small UAVs

    NARCIS (Netherlands)

    Wit, J.J.M. de; Harmanny, R.I.A.; Prémel Cabic, G.

    2012-01-01

    Coherent radar measures micro-Doppler properties of moving objects. The micro-Doppler signature depends on parts of an object moving and rotating in addition to the main body motion (e.g. rotor blades) and is therefore characteristic for the type of object. In this study, the micro-Doppler signature

  15. Can we measure the spiral and uterine artery blood flow by real-time sonography and Doppler indices to predict spontaneous miscarriage in a normal-risk population?

    Science.gov (United States)

    Özkan, Mehmet Burak; Ozyazici, Elif; Emiroglu, Baris; Özkara, Enis

    2015-05-01

    Introduction: The predictive value of spiral artery flow Doppler measurements of a subsequent early miscarriage in first trimester pregnancy is explored here. Objective: The aim of this study is to determine uterine and spiral artery blood flow changes in first trimester subsequent miscarriages and correlate within the mechanisms of the Doppler indicies. Study design: The uterine artery and spiral artery pulsatility and resistance indexes, systolic and diastolic ratios, acceleration times, and blood flow of both the right and left uterine arteries were obtained by trans vaginal color Doppler ultrasonography in consecutive viable pregnancies between 5 and 12 gestational week. Women were subsequently classified as having continuing pregnancies or pregnancy loss before 20 weeks gestation. To predict subsequent pregnancy loss, Doppler findings were adjusted for maternal age, history of previous abortion, presence of subchorionic hematoma, embryonic bradycardia, and gestational age by means of multivariate logistic regression analysis. The cut-off values are used for the ROC curve. Results: Twenty-five pregnancies (11.7%) were spontaneously aborted before 20 weeks of gestational age. In 29 (13.6%) cases there were previously abortion history, 30 (14%) had bradycardia, and 37 (17.3%) had subchoronic hematoma. Regarding the parameters of uterine and spiral artery pulsatility and resistive index, acceleration time, systolic/diastolic ratios and blood flows, only uterine artery S/D low values were significantly associated with pregnancy loss in the multivariate logistic regression analysis (P = 0.0001,95% CI: 4.968-55.675). Conclusion: The uterine artery systolic/diastolic ratios have a predictive value for early pregnancy loss and seem to be useful as a marker. On the other hand, spiral artery changes could be so local that they cannot be determined by the parameters of spectral Doppler techniques. This suggests that uterine vascular bed alterations should be measured to

  16. Applying Laser Doppler Anemometry inside a Taylor-Couette geometry - Using a ray-tracer to correct for curvature effects

    OpenAIRE

    Huisman, Sander G.; van Gils, Dennis P. M.; Sun, Chao

    2012-01-01

    In the present work it will be shown how the curvature of the outer cylinder affects Laser Doppler anemometry measurements inside a Taylor-Couette apparatus. The measurement position and the measured velocity are altered by curved surfaces. Conventional methods for curvature correction are not applicable to our setup, and it will be shown how a ray-tracer can be used to solve this complication. By using a ray-tracer the focal position can be calculated, and the velocity can be corrected. The ...

  17. Evaluation of Acoustic Doppler Current Profiler to Measure Discharge at New York Power Authority's Niagara Power Project, Niagara Falls, New York

    Science.gov (United States)

    Zajd, Henry J.

    2007-01-01

    The need for accurate real-time discharge in the International Niagara River hydro power system requires reliable, accurate and reproducible data. The U.S. Geological Survey has been widely using Acoustic Doppler Current Profilers (ADCP) to accurately measure discharge in riverine channels since the mid-1990s. The use of the ADCP to measure discharge has remained largely untested at hydroelectric-generation facilities such as the New York Power Authority's (NYPA) Niagara Power Project in Niagara Falls, N.Y. This facility has a large, engineered diversion channel with the capacity of high volume discharges in excess of 100,000 cubic feet per second (ft3/s). Facilities such as this could benefit from the use of an ADCP, if the ADCP discharge measurements prove to be more time effective and accurate than those obtained from the flow-calculation techniques that are currently used. Measurements of diversion flow by an ADCP in the 'Pant Leg' diversion channel at the Niagara Power Project were made on November 6, 7, and 8, 2006, and compared favorably (within 1 percent) with those obtained concurrently by a conventional Price-AA current-meter measurement during one of the ADCP measurement sessions. The mean discharge recorded during each 2-hour individual ADCP measurement session compared favorably with (3.5 to 6.8 percent greater than) the discharge values computed by the flow-calculation method presently in use by NYPA. The use of ADCP technology to measure discharge could ultimately permit increased power-generation efficiency at the NYPA Niagara Falls Power Project by providing improved predictions of the amount of water (and thus the power output) available.

  18. Study of Submicron Particle Size Distribution by Laser Doppler Measurement of Brownian Motion.

    Science.gov (United States)

    1987-01-30

    regime considered here, heat transfer from the submicron particles by forced convection and natural convection are negligible due to the extremely small...physical processes begin to influence the Brownian motion characteristics at high laser beam intensity. An analysis of the effects of thermophoresis and...photon pressure was carried out. The effect of thermophoresis due to the uneven heating of the particle by the laser beam was found to be a major

  19. Windscanner: 3-D wind and turbulence measurements from three steerable doppler lidars

    Energy Technology Data Exchange (ETDEWEB)

    Mikkelsen, T; Mann, J; Courtney, M; Sjoeholm, M [Wind Energy Department, Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, P.O. 49, DK-4000 Roskilde (Denmark)], E-mail: torben.mikkelsen@risoe.dk

    2008-05-01

    At RISOe DTU we has started to build a new-designed laser-based lidar scanning facility for detailed remote measurements of the wind fields engulfing the huge wind turbines of today. Our aim is to measure in real-time 3D wind vector data at several hundred points every second: 1) upstream of the turbine, 2) near the turbine, and 3) in the wakes of the turbine rotors. Our first proto-type Windscanner is now being built from three commercially available Continuous Wave (CW) wind lidars modified with fast adjustable focus length and equipped with 2-D prism-based scan heads, in conjunction with a commercially available pulsed wind lidar for extended vertical profiling range. Design, construction and initial testing of the new 3-D wind lidar scanning facility are described and the functionality of the Windscanner and its potential as a new research facility within the wind energy community is discussed.

  20. Cerebral vascular effects of loading dose of dexmedetomidine: A Transcranial Color Doppler study

    Directory of Open Access Journals (Sweden)

    Appavoo Arulvelan

    2016-01-01

    Full Text Available Background: Dexmedetomidine has been widely used in critical care settings because of its property of maintaining stable hemodynamics and inducing conscious sedation. The use of dexmedetomidine is in increasing trend particularly in patients with neurological disorders. Very few studies have focused on the cerebral hemodynamic effects of dexmedetomidine. This study is aimed to address this issue. Methods: Thirty patients without any intracranial pathology were included in this study. Middle cerebral artery flow velocity obtained from transcranial color Doppler was used to assess the cerebral hemodynamic indices. Mean flow velocity (mFV, pulsatility index (PI, cerebral vascular resistant index (CVRi, estimated cerebral perfusion pressure (eCPP, and zero flow pressure (ZFP were calculated bilaterally at baseline and after infusion of injection Dexmedetomidine 1 mcg/Kg over 10 min. Results: Twenty-six patients completed the study protocol. After administration of loading dose of dexmedetomidine, mFV and eCPP values were significantly decreased in both hemispheres (P < 0.05; PI, CVRi, and ZFP values showed significant increase (P < 0.05 after dexmedetomidine infusion. Conclusion: Increase in PI, CVRi, and ZFP suggests that there is a possibility of an increase in distal cerebral vascular resistance (CVR with loading dose of dexmedetomidine. Decrease in mFV and eCPP along with an increase in CVR may lead to a decrease in cerebral perfusion. This effect can be exaggerated in patients with preexisting neurological illness. Further studies are needed to evaluate the effect of dexmedetomidine on various other pathological conditions involving brain like traumatic brain injury and vascular malformations.