WorldWideScience

Sample records for dofts system applied

  1. Distributed optical fiber temperature sensor (DOFTS) system applied to automatic temperature alarm of coal mine and tunnel

    Science.gov (United States)

    Zhang, Zaixuan; Wang, Kequan; Kim, Insoo S.; Wang, Jianfeng; Feng, Haiqi; Guo, Ning; Yu, Xiangdong; Zhou, Bangquan; Wu, Xiaobiao; Kim, Yohee

    2000-05-01

    The DOFTS system that has applied to temperature automatically alarm system of coal mine and tunnel has been researched. It is a real-time, on line and multi-point measurement system. The wavelength of LD is 1550 nm, on the 6 km optical fiber, 3000 points temperature signal is sampled and the spatial position is certain. Temperature measured region: -50 degree(s)C--100 degree(s)C; measured uncertain value: +/- 3 degree(s)C; temperature resolution: 0.1 degree(s)C; spatial resolution: test, test content and practical test results have been discussed.

  2. DOFT and DOFTIP1 affect reproductive development in the orchid Dendrobium Chao Praya Smile.

    Science.gov (United States)

    Wang, Yanwen; Liu, Lu; Song, Shiyong; Li, Yan; Shen, Lisha; Yu, Hao

    2017-12-16

    FLOWERING LOCUS T (FT) in Arabidopsis encodes the florigen that moves from leaves to the shoot apical meristem to induce flowering, and this is partly mediated by FT-INTERACTING PROTEIN 1 (FTIP1). Although FT orthologs have been identified in some flowering plants, their endogenous roles in Orchidaceae, which is one of the largest families of flowering plants, are still largely unknown. In this study, we show that DOFT and DOFTIP1, the orchid orthologs of FT and FTIP1, respectively, play important roles in promoting flowering in the orchid Dendrobium Chao Praya Smile. Expression of DOFT and DOFTIP1 increases in whole plantlets during the transition from vegetative to reproductive development. Both transcripts are present in significant levels in reproductive organs, including inflorescence apices, stems, floral buds, and open flowers. Through successful generation of transgenic orchids, we have revealed that overexpression or down-regulation of DOFT accelerates or delays flowering, respectively, while alteration of DOFT expression also greatly affects pseudobulb formation and flower development. In common with their counterparts in Arabidopsis and rice, DOFTIP1 interacts with DOFT and affects flowering time in orchids. Our results suggest that while DOFT and DOFTIP1 play evolutionarily conserved roles in promoting flowering, DOFT may have evolved with hitherto unknown functions pertaining to the regulation of storage organs and flower development in the Orchidaceae family. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  3. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  4. Applied systems theory

    CERN Document Server

    Dekkers, Rob

    2017-01-01

    Offering an up-to-date account of systems theories and its applications, this book provides a different way of resolving problems and addressing challenges in a swift and practical way, without losing overview and grip on the details. From this perspective, it offers a different way of thinking in order to incorporate different perspectives and to consider multiple aspects of any given problem. Drawing examples from a wide range of disciplines, it also presents worked cases to illustrate the principles. The multidisciplinary perspective and the formal approach to modelling of systems and processes of ‘Applied Systems Theory’ makes it suitable for managers, engineers, students, researchers, academics and professionals from a wide range of disciplines; they can use this ‘toolbox’ for describing, analysing and designing biological, engineering and organisational systems as well as getting a better understanding of societal problems. This revised, updated and expanded second edition includes coverage of a...

  5. Applied multidimensional systems theory

    CERN Document Server

    Bose, Nirmal K

    2017-01-01

    Revised and updated, this concise new edition of the pioneering book on multidimensional signal processing is ideal for a new generation of students. Multidimensional systems or m-D systems are the necessary mathematical background for modern digital image processing with applications in biomedicine, X-ray technology and satellite communications. Serving as a firm basis for graduate engineering students and researchers seeking applications in mathematical theories, this edition eschews detailed mathematical theory not useful to students. Presentation of the theory has been revised to make it more readable for students, and introduce some new topics that are emerging as multidimensional DSP topics in the interdisciplinary fields of image processing. New topics include Groebner bases, wavelets, and filter banks.

  6. Applied systems theory

    CERN Document Server

    Dekkers, Rob

    2014-01-01

    Offering an up-to-date account of systems theories and its applications, this book provides a different way of resolving problems and addressing challenges in a swift and practical way, without losing overview and not having a grip on the details. From this perspective, it offers a different way of thinking in order to incorporate different perspectives and to consider multiple aspects of any given problem. Drawing examples from a wide range of disciplines, it also presents worked cases to illustrate the principles. The multidisciplinary perspective and the formal approach to modelling of syst

  7. Applied computation and security systems

    CERN Document Server

    Saeed, Khalid; Choudhury, Sankhayan; Chaki, Nabendu

    2015-01-01

    This book contains the extended version of the works that have been presented and discussed in the First International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2014) held during April 18-20, 2014 in Kolkata, India. The symposium has been jointly organized by the AGH University of Science & Technology, Cracow, Poland and University of Calcutta, India. The Volume I of this double-volume book contains fourteen high quality book chapters in three different parts. Part 1 is on Pattern Recognition and it presents four chapters. Part 2 is on Imaging and Healthcare Applications contains four more book chapters. The Part 3 of this volume is on Wireless Sensor Networking and it includes as many as six chapters. Volume II of the book has three Parts presenting a total of eleven chapters in it. Part 4 consists of five excellent chapters on Software Engineering ranging from cloud service design to transactional memory. Part 5 in Volume II is on Cryptography with two book...

  8. Applied systems analysis. No. 22

    International Nuclear Information System (INIS)

    1980-12-01

    Based on a detailed analysis of demands in the area Cologne/Frankfurt, the amount of the system products for this region were ascertained, which under consideration of technical conditions and entrepreneurial aspects seemed to be disposable at cost equality with competative energy supplies. Based on these data, the technical components of the system, location and piping were fixed and first- and operating costs were determined. For a judgement of the economics, the key numbers, cash value, internal rate of interest and cost recovery rate were determined from the difference of costs between the nuclear long distance energy system and alternative facilities. Furthermore specific production cost, associated prices and contribution margin were presented for each product. (orig.) [de

  9. The quality management system applied at PRPN

    International Nuclear Information System (INIS)

    Benar Bukit

    2007-01-01

    The ISO 9001-2000 is an International standard for quality management systems. The application of this quality management system is for guaranteeing that the organizations products will fulfill requirements set by its customers. Here the steps taken to apply the quality management system at PRPN are expounded in five main parts, namely quality management system, responsibilities of the management, resources, product realization, measurement, analysis and repair. (author)

  10. Thermodynamic Laws Applied to Economic Systems

    Science.gov (United States)

    González, José Villacís

    2009-01-01

    Economic activity in its different manifestations--production, exchange, consumption and, particularly, information on quantities and prices--generates and transfers energy. As a result, we can apply to it the basic laws of thermodynamics. These laws are applicable within a system, i.e., in a country or between systems and countries. To these…

  11. Integrative Systems Biology Applied to Toxicology

    DEFF Research Database (Denmark)

    Kongsbak, Kristine Grønning

    associated with combined exposure to multiple chemicals. Testing all possible combinations of the tens of thousands environmental chemicals is impractical. This PhD project was launched to apply existing computational systems biology methods to toxicological research. In this thesis, I present in three...... of a system thereby suggesting new ways of thinking specific toxicological endpoints. Furthermore, computational methods can serve as valuable input for the hypothesis generating phase of the preparations of a research project....

  12. Applying Product Configuration Systems in Engineering Companies

    DEFF Research Database (Denmark)

    Ladeby, Klaes Rohde

    This Ph.D. thesis looks into the application of configuration systems in engineering companies, and how configuration systems can be used to support business processes in engineering companies. Often the motivation stated by researchers and practitioners is, that a configuration project...... and sustain competitive advantage” (Teece, Pisano, & Shuen, 1997, pp.509) This question has puzzled academics and preoccupied managers for the last century. Yet, it seems there is still no consensus regarding the meaning of strategy, and how strategy works. Type in the word “strategy” on Amazon.co.uk and 76......,133 books apply. Type it in on Google scholar and 8,580,000 homepages apply3. Obviously, strategy is an important subject. However, the subject also seems to be difficult to perceive. Although this thesis is not about strategy, or strategizing, I would like to pursue the definition of strategy one step...

  13. Plant introduction system applying virtual reality

    International Nuclear Information System (INIS)

    Kasai, Yasusuke; Tanaka, Kazuo; Kimura, Katsumi; Nakakosi, Tetsuhiro

    1995-01-01

    We developed the prototype of the introduction system for nuclear power plant applying 3D-CAD data and the virtual reality (V.R) technologies. For the purpose of the public acceptance (PA), the use of the V.R technologies, such as CG stereographic, will be interesting for the public. Also, it is very important to introduce the components of the plant in detail, which will become easy by using the 3D-CAD data of the nuclear plant. We made a prototype system for introducing the main portion of the nuclear power plant, such as main control room, containment vessel or turbine building, applying CG stereographic by plant 3D data and artificial voice guidance for the explanations. We have exhibited this system in two local festivals at the plant sites. It has been efficient for creating plant scene by using 3D-CAD from the viewpoint of cost, and stereographic has been much attractive to the resident. The detail scenario must be investigated from the viewpoint of PA effect. Also the performance of the graphics workstation should be increased to promote the quality of the CG movie. But we think that this system will have much effective by its novelty and flexibility. (author)

  14. Applied Information Systems Research Program Workshop

    Science.gov (United States)

    1991-01-01

    The first Applied Information Systems Research Program (AISRP) Workshop provided the impetus for several groups involved in information systems to review current activities. The objectives of the workshop included: (1) to provide an open forum for interaction and discussion of information systems; (2) to promote understanding by initiating a dialogue with the intended benefactors of the program, the scientific user community, and discuss options for improving their support; (3) create an advocacy in having science users and investigators of the program meet together and establish the basis for direction and growth; and (4) support the future of the program by building collaborations and interaction to encourage an investigator working group approach for conducting the program.

  15. The Applied Mathematics for Power Systems (AMPS)

    Energy Technology Data Exchange (ETDEWEB)

    Chertkov, Michael [Los Alamos National Laboratory

    2012-07-24

    Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

  16. Applying usability heuristics to radiotherapy systems

    International Nuclear Information System (INIS)

    Chan, Alvita J.; Islam, Mohammad K.; Rosewall, Tara; Jaffray, David A.; Easty, Anthony C.; Cafazzo, Joseph A.

    2012-01-01

    Background and purpose: Heuristic evaluations have been used to evaluate safety of medical devices by identifying and assessing usability issues. Since radiotherapy treatment delivery systems often consist of multiple complex user-interfaces, a heuristic evaluation was conducted to assess the potential safety issues of such a system. Material and methods: A heuristic evaluation was conducted to evaluate the treatment delivery system at Princess Margaret Hospital (Toronto, Canada). Two independent evaluators identified usability issues with the user-interfaces and rated the severity of each issue. Results: The evaluators identified 75 usability issues in total. Eighteen of them were rated as high severity, indicating the potential to have a major impact on patient safety. A majority of issues were found on the record and verify system, and many were associated with the patient setup process. While the hospital has processes in place to ensure patient safety, recommendations were developed to further mitigate the risks of potential consequences. Conclusions: Heuristic evaluation is an efficient and inexpensive method that can be successfully applied to radiotherapy delivery systems to identify usability issues and improve patient safety. Although this study was conducted only at one site, the findings may have broad implications for the design of these systems.

  17. Performance Monitoring Applied to System Supervision

    Directory of Open Access Journals (Sweden)

    Bertille Somon

    2017-07-01

    Full Text Available Nowadays, automation is present in every aspect of our daily life and has some benefits. Nonetheless, empirical data suggest that traditional automation has many negative performance and safety consequences as it changed task performers into task supervisors. In this context, we propose to use recent insights into the anatomical and neurophysiological substrates of action monitoring in humans, to help further characterize performance monitoring during system supervision. Error monitoring is critical for humans to learn from the consequences of their actions. A wide variety of studies have shown that the error monitoring system is involved not only in our own errors, but also in the errors of others. We hypothesize that the neurobiological correlates of the self-performance monitoring activity can be applied to system supervision. At a larger scale, a better understanding of system supervision may allow its negative effects to be anticipated or even countered. This review is divided into three main parts. First, we assess the neurophysiological correlates of self-performance monitoring and their characteristics during error execution. Then, we extend these results to include performance monitoring and error observation of others or of systems. Finally, we provide further directions in the study of system supervision and assess the limits preventing us from studying a well-known phenomenon: the Out-Of-the-Loop (OOL performance problem.

  18. Terahertz spectroscopy applied to food model systems

    DEFF Research Database (Denmark)

    Møller, Uffe

    Water plays a crucial role in the quality of food. Apart from the natural water content of a food product, the state of that water is very important. Water can be found integrated into the biological material or it can be added during production of the product. Currently it is difficult...... to differentiate between these types of water in subsequent quality controls. This thesis describes terahertz time-domain spectroscopy applied on aqueous food model systems, with particular focus on ethanol-water mixtures and confined water pools in inverse micelles....

  19. Wiener filter applied to a neutrongraphic system

    International Nuclear Information System (INIS)

    Crispim, V.R.; Lopes, R.T.; Borges, J.C.

    1986-01-01

    The randon characteristics of the image formation process influence the spatial image obtained in a neutrongraphy. Several methods can be used to optimize this image, though estimation of the noise added to the original signal. This work deals with the optimal filtering technique, using Wiener's filter. A simulation is made, where the signal (spatial resolution function) has a Lorentz's form, and ten kinds of random noise with increasing R.M.S. are generated and individually added to the original signal. Wiener's filter is applied to different noise amplitudes and the behaviour of the spatial resolution function for our system is also analysed. (Author) [pt

  20. Pipesworld : applying planning systems to pipeline transportation

    Energy Technology Data Exchange (ETDEWEB)

    Milidiu, R.L.; Santos Liporace, F. [Pontificia Univ. Catolica, Rio de Janeiro (Brazil). Dept. de Informatica

    2004-07-01

    This paper explored issues facing the complex task of managing pipelines that transport large volumes of petroleum products over long distances. Since oil pipelines are generally a few inches wide and several miles long, reasonable amounts of distinct products can be transported with very small loss due to the mixing at liquid boundaries. Optimizing the transportation through oil pipelines in terms of maintenance and environmental safety is a high priority for pipeline operators. This paper presented the Pipesworld model which takes into account features such as product interface constraints, limited product storage capacities and due dates for product delivery. It has been benchmarked as a start-of-art general purpose artificial planning system. This paper also reported the results derived by general purpose artificial intelligence planning systems when applied to the Pipesworld model. It demonstrated how various modelling techniques can be used to enhance the planners performance. Current work in developing Plumber was also presented. This dedicated solver that addresses operational situations uses both general purpose planning techniques as well as domain specific knowledge. When Plumber was incorporated into Pipesworld, its outperformed Fast-Forward, one of the best available general purpose planning systems, suggesting that improved versions of Plumber have the potential to deal with various problem scenarios in pipeline operations. 11 refs., 2 tabs., 3 figs.

  1. Optical fiber-applied radiation detection system

    International Nuclear Information System (INIS)

    Nishiura, Ryuichi; Uranaka, Yasuo; Izumi, Nobuyuki

    2001-01-01

    A technique to measure radiation by using plastic scintillation fibers doped radiation fluorescent (scintillator) to plastic optical fiber for a radiation sensor, was developed. The technique contains some superiority such as high flexibility due to using fibers, relatively easy large area due to detecting portion of whole of fibers, and no electromagnetic noise effect due to optical radiation detection and signal transmission. Measurable to wide range of and continuous radiation distribution along optical fiber cable at a testing portion using scintillation fiber and flight time method, the optical fiber-applied radiation sensing system can effectively monitor space radiation dose or apparatus operation condition monitoring. And, a portable type scintillation optical fiber body surface pollution monitor can measure pollution concentration of radioactive materials attached onto body surface by arranging scintillation fiber processed to a plate with small size and flexibility around a man to be tested. Here were described on outline and fundamental properties of various application products using these plastic scintillation fiber. (G.K.)

  2. Wavefront compensation applied to AVLIS laser systems

    International Nuclear Information System (INIS)

    Gonsiorowski, T.; Wirth, A.

    1995-01-01

    The efficiency of an AVLIS system depends upon the power density and uniformity of the laser system. Because of wavefront aberrations the realized beam quality is not ideal. Wavefront compensation provides a means to improve beam quality and system efficiency. (author)

  3. Applying improved instrumentation and computer control systems

    International Nuclear Information System (INIS)

    Bevilacqua, F.; Myers, J.E.

    1977-01-01

    In-core and out-of-core instrumentation systems for the Cherokee-I reactor are described. The reactor has 61m-core instrument assemblies. Continuous computer monitoring and processing of data from over 300 fixed detectors will be used to improve the manoeuvering of core power. The plant protection system is a standard package for the Combustion Engineering System 80, consisting of two independent systems, the reactor protection system and the engineering safety features activation system, both of which are designed to meet NRC, ANS and IEEE design criteria or standards. The plants protection system has its own computer which provides plant monitoring, alarming, logging and performance calculations. (U.K.)

  4. Applying Modeling Tools to Ground System Procedures

    Science.gov (United States)

    Di Pasquale, Peter

    2012-01-01

    As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

  5. Applying Systems Engineering on Energy Challenges

    NARCIS (Netherlands)

    Safi, J.; Muller, G.; Bonnema, Gerrit Maarten

    2012-01-01

    Systems engineering is a discipline with methods and techniques to address complex problems. We want to study how Systems Engineering methods can help to address today's grand challenges, such as the energy problem. The first step is problem definition which aims at articulating the problem in its

  6. SORM applied to hierarchical parallel system

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager

    2006-01-01

    of a particular first order reliability method (FORM) was first described in a celebrated paper by Rackwitz and Fiessler more than a quarter of a century ago. The method has become known as the Rackwitz-Fiessler algorithm. The original RF-algorithm as applied to a hierarchical random variable model...... is recapitulated so that a simple but quite effective accuracy improving calculation can be explained. A limit state curvature correction factor on the probability approximation is obtained from the final stop results of the RF-algorithm. This correction factor is based on Breitung’s asymptotic formula for second...

  7. OBTAINING FOOD SAFETY BY APPLYING HACCP SYSTEM

    Directory of Open Access Journals (Sweden)

    ION CRIVEANU

    2012-01-01

    Full Text Available In order to increase the confidence of the trading partners and consumers in the products which are sold on the market, enterprises producing food are required to implement the food safety system HACCP,a particularly useful system because the manufacturer is not able to fully control finished products . SR EN ISO 22000:2005 establishes requirements for a food safety management system where an organization in the food chain needs to proove its ability to control food safety hazards in order to ensure that food is safe at the time of human consumption. This paper presents the main steps which ensure food safety using the HACCP system, and SR EN ISO 20000:2005 requirements for food safety.

  8. Does terrestrial epidemiology apply to marine systems?

    Science.gov (United States)

    McCallum, Hamish I.; Kuris, Armand M.; Harvell, C. Drew; Lafferty, Kevin D.; Smith, Garriet W.; Porter, James

    2004-01-01

    Most of epidemiological theory has been developed for terrestrial systems, but the significance of disease in the ocean is now being recognized. However, the extent to which terrestrial epidemiology can be directly transferred to marine systems is uncertain. Many broad types of disease-causing organism occur both on land and in the sea, and it is clear that some emergent disease problems in marine environments are caused by pathogens moving from terrestrial to marine systems. However, marine systems are qualitatively different from terrestrial environments, and these differences affect the application of modelling and management approaches that have been developed for terrestrial systems. Phyla and body plans are more diverse in marine environments and marine organisms have different life histories and probably different disease transmission modes than many of their terrestrial counterparts. Marine populations are typically more open than terrestrial ones, with the potential for long-distance dispersal of larvae. Potentially, this might enable unusually rapid propagation of epidemics in marine systems, and there are several examples of this. Taken together, these differences will require the development of new approaches to modelling and control of infectious disease in the ocean.

  9. Systems biology: the reincarnation of systems theory applied in biology?

    Science.gov (United States)

    Wolkenhauer, O

    2001-09-01

    With the availability of quantitative data on the transcriptome and proteome level, there is an increasing interest in formal mathematical models of gene expression and regulation. International conferences, research institutes and research groups concerned with systems biology have appeared in recent years and systems theory, the study of organisation and behaviour per se, is indeed a natural conceptual framework for such a task. This is, however, not the first time that systems theory has been applied in modelling cellular processes. Notably in the 1960s systems theory and biology enjoyed considerable interest among eminent scientists, mathematicians and engineers. Why did these early attempts vanish from research agendas? Here we shall review the domain of systems theory, its application to biology and the lessons that can be learned from the work of Robert Rosen. Rosen emerged from the early developments in the 1960s as a main critic but also developed a new alternative perspective to living systems, a concept that deserves a fresh look in the post-genome era of bioinformatics.

  10. Combined confinement system applied to tokamaks

    International Nuclear Information System (INIS)

    Ohkawa, Tihiro

    1986-01-01

    From particle orbit point of view, a tokamak is a combined confinement configuration where a closed toroidal volume is surrounded by an open confinement system like a magnetic mirror. By eliminating a cold halo plasma, the energy loss from the plasma becomes convective. The H-mode in diverted tokamaks is an example. Because of the favorable scaling of the energy confinement time with temperature, the performance of the tokamak may be significantly improved by taking advantage of this effect. (author)

  11. Applying intelligent statistical methods on biometric systems

    OpenAIRE

    Betschart, Willie

    2005-01-01

    This master’s thesis work was performed at Optimum Biometric Labs, OBL, located in Karlskrona, Sweden. Optimum Biometric Labs perform independent scenario evaluations to companies who develop biometric devices. The company has a product Optimum preConTM which is surveillance and diagnosis tool for biometric systems. This thesis work’s objective was to develop a conceptual model and implement it as an additional layer above the biometric layer with intelligence about the biometric users. The l...

  12. Microemulsion systems applied to breakdown petroleum emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Neuma de Castro Dantas, Tereza; Avelino Dantas Neto, Afonso; Ferreira Moura, Everlane [Deptos de Quimica e Eng. Quimica, Universidade Federal do Rio Grande do Norte, Campus Universitario s/n, 59072.970, Natal/RN Campinas (Brazil)

    2001-12-29

    Microemulsion systems obtained using commercial surfactants with demulsifier and emulsion prevention properties have been employed to break down Brazilian crude water-in-oil (W/O) emulsions. These crude oils were supplied by the Brazilian oil company-PETROBRAS-and were characterized by the different Balance sheet of Sediment and Water (BSW) values of 48%, 36%, and 32%. The microemulsion systems formed in this study were composed of an aqueous phase (HCl 5.2% solution); an oil phase (toluene); a cosurfactant/surfactant (C/S) phase (isopropyl alcohol (C)/surfactants (S) with a ratio C/S of 9.0). The microemulsion efficiency to break down oil emulsions was evaluated by a direct contact method between the microemulsions and crude (W/O) emulsions. The Scheffe net statistical planning for mixtures was used to relate the component mass fractions to the relative breakdown of petroleum emulsions. The best composition of the microemulsion system for the complete breakdown of oil emulsions with high BSW values had the lowest C/S phase percentage.

  13. Applied optimal control theory of distributed systems

    CERN Document Server

    Lurie, K A

    1993-01-01

    This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis­ tributed systems. ...

  14. Liquid Chromatography Applied to Space System

    Science.gov (United States)

    Poinot, Pauline; Chazalnoel, Pascale; Geffroy, Claude; Sternberg, Robert; Carbonnier, Benjamin

    Searching for signs of past or present life in our Solar System is a real challenge that stirs up the curiosity of scientists. Until now, in situ instrumentation was designed to detect and determine concentrations of a wide number of organic biomarkers. The relevant method which was and still is employed in missions dedicated to the quest of life (from Viking to ExoMars) corresponds to the pyrolysis-GC-MS. Along the missions, this approach has been significantly improved in terms of extraction efficiency and detection with the use of chemical derivative agents (e.g. MTBSTFA, DMF-DMA, TMAH…), and in terms of analysis sensitivity and resolution with the development of in situ high-resolution mass spectrometer (e.g. TOF-MS). Thanks to such an approach, organic compounds such as amino acids, sugars, tholins or polycyclic aromatic hydrocarbons (PAHs) were expected to be found. However, while there’s a consensus that the GC-MS of Viking, Huygens, MSL and MOMA space missions worked the way they had been designed to, pyrolysis is much more in debate (Glavin et al. 2001; Navarro-González et al. 2006). Indeed, (1) it is thought to remove low levels of organics, (2) water and CO2 could interfere with the detection of likely organic pyrolysis products, and (3) only low to mid-molecular weight organic molecules can be detected by this technique. As a result, researchers are now focusing on other in situ techniques which are no longer based on the volatility of the organic matter, but on the liquid phase extraction and analysis. In this line, micro-fluidic systems involving sandwich and/or competitive immunoassays (e.g. LMC, SOLID; Parro et al. 2005; Sims et al. 2012), micro-chip capillary electrophoreses (e.g. MOA; Bada et al. 2008), or nanopore-based analysis (e.g. BOLD; Schulze-Makuch et al. 2012) have been conceived for in situ analysis. Thanks to such approaches, molecular biological polymers (polysaccharides, polypeptides, polynucleotides, phospholipids, glycolipids

  15. A Vision for Systems Engineering Applied to Wind Energy (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Felker, F.; Dykes, K.

    2015-01-01

    This presentation was given at the Third Wind Energy Systems Engineering Workshop on January 14, 2015. Topics covered include the importance of systems engineering, a vision for systems engineering as applied to wind energy, and application of systems engineering approaches to wind energy research and development.

  16. Matrix converter applied to energy saving for street lighting systems

    OpenAIRE

    Román Lumbreras, Manuel; Velasco Quesada, Guillermo; Conesa Roca, Alfons

    2010-01-01

    This work presents a three-phase AC-AC converter, with independent phase control, based on matrix-converter structure. This converter is applied to electrical energy saving on the public lighting systems by means of regulation and control of the voltage applied to the lamps. The developed converter represents a technological improvement with respect to the traditional systems based on an autotransformer: it reduces system cost and volume, and increases lamps lifetime.

  17. XML: How It Will Be Applied to Digital Library Systems.

    Science.gov (United States)

    Kim, Hyun-Hee; Choi, Chang-Seok

    2000-01-01

    Shows how XML is applied to digital library systems. Compares major features of XML with those of HTML and describes an experimental XML-based metadata retrieval system, which is based on the Dublin Core and is designed as a subsystem of the Korean Virtual Library and Information System (VINIS). (Author/LRW)

  18. Applying System of Systems Engineering(SoSE) to VIVO?

    OpenAIRE

    Wang, Jing

    2015-01-01

    System of systems (SoS) refers to a set of operational and managerial independent systems interacting with each other to provide capabilities which cannot be accomplished by any single system. SoS has its own characteristics and challenges, such as emergent behavior and evolutionary development. This presentation will: Introduce the concepts and characteristics of system of systems (SoS) and system thinking practice. discuss SoS challenges using SoS case studies such as Global Earth Observati...

  19. System theory as applied differential geometry. [linear system

    Science.gov (United States)

    Hermann, R.

    1979-01-01

    The invariants of input-output systems under the action of the feedback group was examined. The approach used the theory of Lie groups and concepts of modern differential geometry, and illustrated how the latter provides a basis for the discussion of the analytic structure of systems. Finite dimensional linear systems in a single independent variable are considered. Lessons of more general situations (e.g., distributed parameter and multidimensional systems) which are increasingly encountered as technology advances are presented.

  20. Development of adaptive control applied to chaotic systems

    Science.gov (United States)

    Rhode, Martin Andreas

    1997-12-01

    Continuous-time derivative control and adaptive map-based recursive feedback control techniques are used to control chaos in a variety of systems and in situations that are of practical interest. The theoretical part of the research includes the review of fundamental concept of control theory in the context of its applications to deterministic chaotic systems, the development of a new adaptive algorithm to identify the linear system properties necessary for control, and the extension of the recursive proportional feedback control technique, RPF, to high dimensional systems. Chaos control was applied to models of a thermal pulsed combustor, electro-chemical dissolution and the hyperchaotic Rossler system. Important implications for combustion engineering were suggested by successful control of the model of the thermal pulsed combustor. The system was automatically tracked while maintaining control into regions of parameter and state space where no stable attractors exist. In a simulation of the electrochemical dissolution system, application of derivative control to stabilize a steady state, and adaptive RPF to stabilize a period one orbit, was demonstrated. The high dimensional adaptive control algorithm was applied in a simulation using the Rossler hyperchaotic system, where a period-two orbit with two unstable directions was stabilized and tracked over a wide range of a system parameter. In the experimental part, the electrochemical system was studied in parameter space, by scanning the applied potential and the frequency of the rotating copper disk. The automated control algorithm is demonstrated to be effective when applied to stabilize a period-one orbit in the experiment. We show the necessity of small random perturbations applied to the system in order to both learn the dynamics and control the system at the same time. The simultaneous learning and control capability is shown to be an important part of the active feedback control.

  1. System for corrosion monitoring in pipeline applying fuzzy logic mathematics

    Science.gov (United States)

    Kuzyakov, O. N.; Kolosova, A. L.; Andreeva, M. A.

    2018-05-01

    A list of factors influencing corrosion rate on the external side of underground pipeline is determined. Principles of constructing a corrosion monitoring system are described; the system performance algorithm and program are elaborated. A comparative analysis of methods for calculating corrosion rate is undertaken. Fuzzy logic mathematics is applied to reduce calculations while considering a wider range of corrosion factors.

  2. Complex, Dynamic Systems: A New Transdisciplinary Theme for Applied Linguistics?

    Science.gov (United States)

    Larsen-Freeman, Diane

    2012-01-01

    In this plenary address, I suggest that Complexity Theory has the potential to contribute a transdisciplinary theme to applied linguistics. Transdisciplinary themes supersede disciplines and spur new kinds of creative activity (Halliday 2001 [1990]). Investigating complex systems requires researchers to pay attention to system dynamics. Since…

  3. Path Integration Applied to Structural Systems with Uncertain Properties

    DEFF Research Database (Denmark)

    Nielsen, Søren R.K.; Köylüoglu, H. Ugur

    Path integration (cell-to-cell mapping) method is applied to evaluate the joint probability density function (jpdf) of the response of the structural systems, with uncertain properties, subject to white noise excitation. A general methodology to deal with uncertainties is outlined and applied...... to the friction controlled slip of a structure on a foundation where the friction coefficient is modelled as a random variable. Exact results derived using the total probability theorem are compared to the ones obtained via path integration....

  4. Applying Model Based Systems Engineering to NASA's Space Communications Networks

    Science.gov (United States)

    Bhasin, Kul; Barnes, Patrick; Reinert, Jessica; Golden, Bert

    2013-01-01

    System engineering practices for complex systems and networks now require that requirement, architecture, and concept of operations product development teams, simultaneously harmonize their activities to provide timely, useful and cost-effective products. When dealing with complex systems of systems, traditional systems engineering methodology quickly falls short of achieving project objectives. This approach is encumbered by the use of a number of disparate hardware and software tools, spreadsheets and documents to grasp the concept of the network design and operation. In case of NASA's space communication networks, since the networks are geographically distributed, and so are its subject matter experts, the team is challenged to create a common language and tools to produce its products. Using Model Based Systems Engineering methods and tools allows for a unified representation of the system in a model that enables a highly related level of detail. To date, Program System Engineering (PSE) team has been able to model each network from their top-level operational activities and system functions down to the atomic level through relational modeling decomposition. These models allow for a better understanding of the relationships between NASA's stakeholders, internal organizations, and impacts to all related entities due to integration and sustainment of existing systems. Understanding the existing systems is essential to accurate and detailed study of integration options being considered. In this paper, we identify the challenges the PSE team faced in its quest to unify complex legacy space communications networks and their operational processes. We describe the initial approaches undertaken and the evolution toward model based system engineering applied to produce Space Communication and Navigation (SCaN) PSE products. We will demonstrate the practice of Model Based System Engineering applied to integrating space communication networks and the summary of its

  5. Applying Sustainable Systems Development Approach to Educational Technology Systems

    Science.gov (United States)

    Huang, Albert

    2012-01-01

    Information technology (IT) is an essential part of modern education. The roles and contributions of technology to education have been thoroughly documented in academic and professional literature. Despite the benefits, the use of educational technology systems (ETS) also creates a significant impact on the environment, primarily due to energy…

  6. Sensitivity analysis approaches applied to systems biology models.

    Science.gov (United States)

    Zi, Z

    2011-11-01

    With the rising application of systems biology, sensitivity analysis methods have been widely applied to study the biological systems, including metabolic networks, signalling pathways and genetic circuits. Sensitivity analysis can provide valuable insights about how robust the biological responses are with respect to the changes of biological parameters and which model inputs are the key factors that affect the model outputs. In addition, sensitivity analysis is valuable for guiding experimental analysis, model reduction and parameter estimation. Local and global sensitivity analysis approaches are the two types of sensitivity analysis that are commonly applied in systems biology. Local sensitivity analysis is a classic method that studies the impact of small perturbations on the model outputs. On the other hand, global sensitivity analysis approaches have been applied to understand how the model outputs are affected by large variations of the model input parameters. In this review, the author introduces the basic concepts of sensitivity analysis approaches applied to systems biology models. Moreover, the author discusses the advantages and disadvantages of different sensitivity analysis methods, how to choose a proper sensitivity analysis approach, the available sensitivity analysis tools for systems biology models and the caveats in the interpretation of sensitivity analysis results.

  7. Fast and effective embedded systems design applying the ARM mbed

    CERN Document Server

    Toulson, Rob

    2012-01-01

    A hands-on introduction to the field of embedded systems; A focus on fast prototyping of embedded systems; All key embedded system concepts covered through simple and effective experimentation; An understanding of ARM technology, one of the world's leaders; A practical introduction to embedded C; Applies possibly the most accessible set of tools available in the embedded world.  This book is an introduction to embedded systems design, using the ARM mbed and C programming language as development tools. The mbed provides a compact, self-contained and low-cost hardware core, and the

  8. Applying incomplete statistics to nonextensive systems with different q indices

    International Nuclear Information System (INIS)

    Nivanen, L.; Pezeril, M.; Wang, Q.A.; Mehaute, A. Le

    2005-01-01

    The nonextensive statistics based on the q-entropy Sq=--bar i=1v(pi-piq)1-q has been so far applied to systems in which the q value is uniformly distributed. For the systems containing different q's, the applicability of the theory is still a matter of investigation. The difficulty is that the class of systems to which the theory can be applied is actually limited by the usual nonadditivity rule of entropy which is no more valid when the systems contain non uniform distribution of q values. In this paper, within the framework of the so called incomplete information theory, we propose a more general nonadditivity rule of entropy prescribed by the zeroth law of thermodynamics. This new nonadditivity generalizes in a simple way the usual one and can be proved to lead uniquely to the q-entropy

  9. Applying model predictive control to power system frequency control

    OpenAIRE

    Ersdal, AM; Imsland, L; Cecilio, IM; Fabozzi, D; Thornhill, NF

    2013-01-01

    16.07.14 KB Ok to add accepted version to Spiral Model predictive control (MPC) is investigated as a control method which may offer advantages in frequency control of power systems than the control methods applied today, especially in presence of increased renewable energy penetration. The MPC includes constraints on both generation amount and generation rate of change, and it is tested on a one-area system. The proposed MPC is tested against a conventional proportional-integral (PI) cont...

  10. SCADA system with predictive controller applied to irrigation canals

    OpenAIRE

    Figueiredo, João; Botto, Miguel; Rijo, Manuel

    2013-01-01

    This paper applies a model predictive controller (MPC) to an automatic water canal with sensors and actuators controlled by a network (programmable logic controller), and supervised by a SCADA system (supervisory control and a data acquisition). This canal is composed by a set of distributed sub-systems that control the water level in each canal pool, constrained by discharge gates (control variables) and water off-takes (disturbances). All local controllers are available through an industria...

  11. Database management systems understanding and applying database technology

    CERN Document Server

    Gorman, Michael M

    1991-01-01

    Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

  12. Applied dynamics with applications to multibody and mechatronic systems

    CERN Document Server

    Moon, Francis C

    1998-01-01

    Applied Dynamics provides a modern and thorough examination of dynamics with specific emphasis on physical examples and applications such as: robotic systems, magnetic bearings, aerospace dynamics, and microelectromagnetic machines. Also includes the development of the method of virtual velocities based on the principle of virtual power

  13. Applied Information Systems Research Program (AISRP) Workshop 3 meeting proceedings

    Science.gov (United States)

    1993-01-01

    The third Workshop of the Applied Laboratory Systems Research Program (AISRP) met at the Univeristy of Colorado's Laboratory for Atmospheric and Space Physics in August of 1993. The presentations were organized into four sessions: Artificial Intelligence Techniques; Scientific Visualization; Data Management and Archiving; and Research and Technology.

  14. Meta-learning framework applied in bioinformatics inference system design.

    Science.gov (United States)

    Arredondo, Tomás; Ormazábal, Wladimir

    2015-01-01

    This paper describes a meta-learner inference system development framework which is applied and tested in the implementation of bioinformatic inference systems. These inference systems are used for the systematic classification of the best candidates for inclusion in bacterial metabolic pathway maps. This meta-learner-based approach utilises a workflow where the user provides feedback with final classification decisions which are stored in conjunction with analysed genetic sequences for periodic inference system training. The inference systems were trained and tested with three different data sets related to the bacterial degradation of aromatic compounds. The analysis of the meta-learner-based framework involved contrasting several different optimisation methods with various different parameters. The obtained inference systems were also contrasted with other standard classification methods with accurate prediction capabilities observed.

  15. An overview of decision tree applied to power systems

    DEFF Research Database (Denmark)

    Liu, Leo; Rather, Zakir Hussain; Chen, Zhe

    2013-01-01

    The corrosive volume of available data in electric power systems motivate the adoption of data mining techniques in the emerging field of power system data analytics. The mainstream of data mining algorithm applied to power system, Decision Tree (DT), also named as Classification And Regression...... Tree (CART), has gained increasing interests because of its high performance in terms of computational efficiency, uncertainty manageability, and interpretability. This paper presents an overview of a variety of DT applications to power systems for better interfacing of power systems with data...... analytics. The fundamental knowledge of CART algorithm is also introduced which is then followed by examples of both classification tree and regression tree with the help of case study for security assessment of Danish power system....

  16. Applying Trusted Network Technology To Process Control Systems

    Science.gov (United States)

    Okhravi, Hamed; Nicol, David

    Interconnections between process control networks and enterprise networks expose instrumentation and control systems and the critical infrastructure components they operate to a variety of cyber attacks. Several architectural standards and security best practices have been proposed for industrial control systems. However, they are based on older architectures and do not leverage the latest hardware and software technologies. This paper describes new technologies that can be applied to the design of next generation security architectures for industrial control systems. The technologies are discussed along with their security benefits and design trade-offs.

  17. SOME EXAMPLES OF APPLIED SYSTEMS WITH SPEECH INTERFACE

    Directory of Open Access Journals (Sweden)

    V. A. Zhitko

    2017-01-01

    Full Text Available Three examples of applied systems with a speech interface are considered in the article. The first two of these provide the end user with the opportunity to ask verbally the question and to hear the response from the system, creating an addition to the traditional I / O via the keyboard and computer screen. The third example, the «IntonTrainer» system, provides the user with the possibility of voice interaction and is designed for in-depth self-learning of the intonation of oral speech.

  18. Human-Machine Systems concepts applied to Control Engineering Education

    OpenAIRE

    Marangé , Pascale; Gellot , François; Riera , Bernard

    2008-01-01

    International audience; In this paper, we interest us to Human-Machine Systems (HMS) concepts applied to Education. It is shown how the HMS framework enables to propose original solution in matter of education in the field of control engineering. We focus on practical courses on control of manufacturing systems. The proposed solution is based on an original use of real and large-scale systems instead of simulation. The main idea is to enable the student, whatever his/her level to control the ...

  19. Three-dimensional integrated CAE system applying computer graphic technique

    International Nuclear Information System (INIS)

    Kato, Toshisada; Tanaka, Kazuo; Akitomo, Norio; Obata, Tokayasu.

    1991-01-01

    A three-dimensional CAE system for nuclear power plant design is presented. This system utilizes high-speed computer graphic techniques for the plant design review, and an integrated engineering database for handling the large amount of nuclear power plant engineering data in a unified data format. Applying this system makes it possible to construct a nuclear power plant using only computer data from the basic design phase to the manufacturing phase, and it increases the productivity and reliability of the nuclear power plants. (author)

  20. Applying of USB interface technique in nuclear spectrum acquisition system

    International Nuclear Information System (INIS)

    Zhou Jianbin; Huang Jinhua

    2004-01-01

    This paper introduces applying of USB technique and constructing nuclear spectrum acquisition system via PC's USB interface. The authors choose the USB component USB100 module and the W77E58μc to do the key work. It's easy to apply USB interface technique, when USB100 module is used. USB100 module can be treated as a common I/O component for the μc controller, and can be treated as a communication interface (COM) when connected to PC' USB interface. It's easy to modify the PC's program for the new system with USB100 module. The authors can smoothly change from ISA, RS232 bus to USB bus. (authors)

  1. Nuclear safety as applied to space power reactor systems

    International Nuclear Information System (INIS)

    Cummings, G.E.

    1987-01-01

    To develop a strategy for incorporating and demonstrating safety, it is necessary to enumerate the unique aspects of space power reactor systems from a safety standpoint. These features must be differentiated from terrestrial nuclear power plants so that our experience can be applied properly. Some ideas can then be developed on how safe designs can be achieved so that they are safe and perceived to be safe by the public. These ideas include operating only after achieving a stable orbit, developing an inherently safe design, ''designing'' in safety from the start and managing the system development (design) so that it is perceived safe. These and other ideas are explored further in this paper

  2. Discrete Event Supervisory Control Applied to Propulsion Systems

    Science.gov (United States)

    Litt, Jonathan S.; Shah, Neerav

    2005-01-01

    The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

  3. Defence in Depth - Applied to the Nuclear System

    Energy Technology Data Exchange (ETDEWEB)

    Weightman, M., E-mail: mike_weightman@hotmail.com

    2014-10-15

    Full text: Normally, the Defence in Depth concept is applied to the technical barriers that provide protection to the public and workers from nuclear accidents. This allows designers, operators and regulators to challenge (along with using other design principles such as independence, redundancy, diversity, single point failure, etc) the technical systems provided to see whether more needs to be done to provide adequate defence in depth to ensure risks are reduced so far as is reasonably practical. Post Fukushima, much thought has gone into reconsidering whether the effectiveness of the defence in depth concept can be enhanced by, for example, rebalancing the attention between prevention and mitigation or enhancing the independence of protective measures such as providing extremely robust standalone emergency cooling capability. This presentation argues that Fukushima teaches us a more fundamental lesson - that the defence in depth concept (along with other design principles') should be applied to the nuclear system to see whether more should be done to enhance the institutional barriers in any particular nuclear system. These barriers are at three main levels: industry, regulators and stakeholders each with sub-barriers. It reinforces the need for industry and regulators to be independent, open and transparent so that the nuclear system can work effectively. Examples are given where the application of the model identifies areas for improvement in existing systems. (author)

  4. Applied Ontology Engineering in Cloud Services, Networks and Management Systems

    CERN Document Server

    Serrano Orozco, J Martín

    2012-01-01

    Metadata standards in today’s ICT sector are proliferating at unprecedented levels, while automated information management systems collect and process exponentially increasing quantities of data. With interoperability and knowledge exchange identified as a core challenge in the sector, this book examines the role ontology engineering can play in providing solutions to the problems of information interoperability and linked data. At the same time as introducing basic concepts of ontology engineering, the book discusses methodological approaches to formal representation of data and information models, thus facilitating information interoperability between heterogeneous, complex and distributed communication systems. In doing so, the text advocates the advantages of using ontology engineering in telecommunications systems. In addition, it offers a wealth of guidance and best-practice techniques for instances in which ontology engineering is applied in cloud services, computer networks and management systems. �...

  5. Water management - management actions applied to water resources system

    International Nuclear Information System (INIS)

    Petkovski, Ljupcho; Tanchev, Ljubomir

    2001-01-01

    In this paper are presented a general description of water resource systems, a systematisation of the management tasks and the approaches for solution, including a review of methods used for solution of water management tasks and the fundamental postulates in the management. The management of water resources is a synonym for the management actions applied to water resource systems. It is a general term that unites planning and exploitation of the systems. The modern planning assumes separating the water racecourse part from the hydro technical part of the project. The water resource study is concerned with the solution for the resource problem. This means the parameters of the system are determined in parallel with the definition of the water utilisation regime. The hydro-technical part of the project is the design of structures necessary for the water resource solution. (Original)

  6. Apply Functional Modelling to Consequence Analysis in Supervision Systems

    DEFF Research Database (Denmark)

    Zhang, Xinxin; Lind, Morten; Gola, Giulio

    2013-01-01

    This paper will first present the purpose and goals of applying functional modelling approach to consequence analysis by adopting Multilevel Flow Modelling (MFM). MFM Models describe a complex system in multiple abstraction levels in both means-end dimension and whole-part dimension. It contains...... consequence analysis to practical or online applications in supervision systems. It will also suggest a multiagent solution as the integration architecture for developing tools to facilitate the utilization results of functional consequence analysis. Finally a prototype of the multiagent reasoning system...... causal relations between functions and goals. A rule base system can be developed to trace the causal relations and perform consequence propagations. This paper will illustrate how to use MFM for consequence reasoning by using rule base technology and describe the challenges for integrating functional...

  7. [Microinjection Monitoring System Design Applied to MRI Scanning].

    Science.gov (United States)

    Xu, Yongfeng

    2017-09-30

    A microinjection monitoring system applied to the MRI scanning was introduced. The micro camera probe was used to stretch into the main magnet for real-time video injection monitoring of injection tube terminal. The programming based on LabVIEW was created to analysis and process the real-time video information. The feedback signal was used for intelligent controlling of the modified injection pump. The real-time monitoring system can make the best use of injection under the condition that the injection device was away from the sample which inside the magnetic room and unvisible. 9.4 T MRI scanning experiment showed that the system in ultra-high field can work stability and doesn't affect the MRI scans.

  8. Expert systems applied to two problems in nuclear power plants

    International Nuclear Information System (INIS)

    Kim, K.Y.

    1988-01-01

    This dissertation describes two prototype expert systems applied to two problems in nuclear power plants. One problem is spare parts inventory control, and the other one is radionuclide release from containment during severe accident. The expert system for spare parts inventory control can handle spare parts requirements not only in corrective, preventive, or predictive maintenance, but also when failure rates of components or parts are updated by new data. Costs and benefits of spare parts inventory acquisition are evaluated with qualitative attributes such as spare part availability to provide the inventory manager with an improved basis for decision making. The expert system is implemented with Intelligence/Compiler on an IBM-AT. The other expert system for radionuclide release from containment can estimate magnitude, type, location, and time of release of radioactive materials from containment during a severe accident nearly on line, based on the actual measured physical parameters such as temperature and pressure inside the containment. The expert system has a function to check the validation of sensor data. The expert system is implemented with KEE on a Symbolics LISP machine

  9. Systemic toxicity of dermally applied crude oils in rats

    Energy Technology Data Exchange (ETDEWEB)

    Feuston, M.H.; Mackerer, C.R.; Schreiner, C.A.; Hamilton, C.E. [Stonybrook Labs., Inc., Princeton, NJ (United States)

    1997-12-31

    Two crude oils, differing in viscosity (V) and nitrogen (N) and sulfur (S) content, were evaluated for systemic toxicity, In the Crude I (low V, low N, low S) study, the material was applied to the clipped backs of rats at dose levels of 0, 30, 125, and 500 mg/kg. In the Crude II (high V, high N, moderate S) study, the oil was applied similarly at the same dose levels. The crude oils were applied for 13 wk, 5 d/wk. Exposure sites were not occluded. Mean body weight gain (wk 1-14) was significantly reduced in male rats exposed to Crude II; body weight gain of all other animals was not adversely affected by treatment. An increase in absolute (A) and relative (R) liver weights and a decrease in A and R thymus weights were observed in male and female rats exposed to Crude II at 500 mg/kg; only liver weights (A and R) were adversely affected in male and female rats exposed to Crude I. In general, there was no consistent pattern of toxicity for serum chemistry endpoints; however, more parameters were adversely affected in Crude II-exposed female rats than in the other exposed groups. A consistent pattern of toxicity for hematology endpoints was observed among male rats exposed to Crude I and male and female rats exposed to Crude II. Parameters affected included: Crudes I and II, red blood cell count, hemoglobin, and hematocrit, Crude II, platelet count. Microscopic evaluation of tissues revealed the following treatment-related findings: Crude I, treated skin, thymus, and thyroid; Crude II, bone marrow, treated skin, thymus, and thyroid. The LOEL (lowest observable effect level) for skin irritation and systemic toxicity (based on marginal effects on the thyroid) for both crude oils was 30 mg/kg; effects were more numerous and more pronounced in animals exposed to Crude II. Systemic effects are probably related to concentrations of polycyclic aromatic compounds (PAC) found in crude oil.

  10. Norm estimates of complex symmetric operators applied to quantum systems

    International Nuclear Information System (INIS)

    Prodan, Emil; Garcia, Stephan R; Putinar, Mihai

    2006-01-01

    This paper communicates recent results in the theory of complex symmetric operators and shows, through two non-trivial examples, their potential usefulness in the study of Schroedinger operators. In particular, we propose a formula for computing the norm of a compact complex symmetric operator. This observation is applied to two concrete problems related to quantum mechanical systems. First, we give sharp estimates on the exponential decay of the resolvent and the single-particle density matrix for Schroedinger operators with spectral gaps. Second, we provide new ways of evaluating the resolvent norm for Schroedinger operators appearing in the complex scaling theory of resonances

  11. Applying Distributed Object Technology to Distributed Embedded Control Systems

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Dalgaard, Lars

    2012-01-01

    In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. MicroR...... in developing control systems for distributed embedded platforms possessing severe resource restrictions.......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

  12. Can casemix-systems be applied in Danish primary care?

    DEFF Research Database (Denmark)

    Halling, Anders; Kristensen, Troels

    -sectional study uses individual data on gender, age and diagnoses for the year 2013 from the Danish General Practice Database (DAMD) to make ACG groupings of a sample of 700,443 citizens of Zealand in Denmark. The Johns Hopkins Adjusted Clinical Groups ACG software, Version 10 December 2011 was applied to make...... that the corresponding ACG / RUB-grouping provide useful estimates of morbidity burden (casemix) and related resource need. Before a casemix system is implemented in Denmark, however, further research should be undertaken of the applicability of the DAMD data and the corresponding ACG groupings....

  13. Applied Information Systems Research Program (AISRP). Workshop 2: Meeting Proceedings

    Science.gov (United States)

    1992-01-01

    The Earth and space science participants were able to see where the current research can be applied in their disciplines and computer science participants could see potential areas for future application of computer and information systems research. The Earth and Space Science research proposals for the High Performance Computing and Communications (HPCC) program were under evaluation. Therefore, this effort was not discussed at the AISRP Workshop. OSSA's other high priority area in computer science is scientific visualization, with the entire second day of the workshop devoted to it.

  14. Applying principles of health system strengthening to eye care

    Directory of Open Access Journals (Sweden)

    Karl Blanchet

    2012-01-01

    Full Text Available Understanding Health systems have now become the priority focus of researchers and policy makers, who have progressively moved away from a project-centred perspectives. The new tendency is to facilitate a convergence between health system developers and disease-specific programme managers in terms of both thinking and action, and to reconcile both approaches: one focusing on integrated health systems and improving the health status of the population and the other aiming at improving access to health care. Eye care interventions particularly in developing countries have generally been vertically implemented (e.g. trachoma, cataract surgeries often with parallel organizational structures or specialised disease specific services. With the emergence of health system strengthening in health strategies and in the service delivery of interventions there is a need to clarify and examine inputs in terms governance, financing and management. This present paper aims to clarify key concepts in health system strengthening and describe the various components of the framework as applied in eye care interventions.

  15. An improved AVC strategy applied in distributed wind power system

    Science.gov (United States)

    Zhao, Y. N.; Liu, Q. H.; Song, S. Y.; Mao, W.

    2016-08-01

    Traditional AVC strategy is mainly used in wind farm and only concerns about grid connection point, which is not suitable for distributed wind power system. Therefore, this paper comes up with an improved AVC strategy applied in distributed wind power system. The strategy takes all nodes of distribution network into consideration and chooses the node having the most serious voltage deviation as control point to calculate the reactive power reference. In addition, distribution principles can be divided into two conditions: when wind generators access to network on single node, the reactive power reference is distributed according to reactive power capacity; when wind generators access to network on multi-node, the reference is distributed according to sensitivity. Simulation results show the correctness and reliability of the strategy. Compared with traditional control strategy, the strategy described in this paper can make full use of generators reactive power output ability according to the distribution network voltage condition and improve the distribution network voltage level effectively.

  16. Applied systems ecology: models, data, and statistical methods

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, L L

    1976-01-01

    In this report, systems ecology is largely equated to mathematical or computer simulation modelling. The need for models in ecology stems from the necessity to have an integrative device for the diversity of ecological data, much of which is observational, rather than experimental, as well as from the present lack of a theoretical structure for ecology. Different objectives in applied studies require specialized methods. The best predictive devices may be regression equations, often non-linear in form, extracted from much more detailed models. A variety of statistical aspects of modelling, including sampling, are discussed. Several aspects of population dynamics and food-chain kinetics are described, and it is suggested that the two presently separated approaches should be combined into a single theoretical framework. It is concluded that future efforts in systems ecology should emphasize actual data and statistical methods, as well as modelling.

  17. A Novel Surveillance System Applied in Civil Airport

    Directory of Open Access Journals (Sweden)

    Sun Hua Bo

    2016-01-01

    Full Text Available Conventional security monitoring of civil airport usually uses a fixed camera to acquire images. There are several problems with performance including difficulties introduced in the information transmission, storage, and analysis of the process. Insect compound eyes offer unique advantages for moving target capture and these have attracted the attention of many researchers in recent years. This paper contributes to this research by proposing a new surveillance system applied in civil airport. We discuss the finished bionic structure of the system, the development of the bionic control circuit, and introduce the proposed mathematical model of bionic compound eyes for data acquisition and image mosaic. Image matching for large view is also illustrated with different conditions. This mode and algorithm effectively achieve safety surveillance of airport with large field of view and high real-time processing.

  18. Applying systems ergonomics methods in sport: A systematic review.

    Science.gov (United States)

    Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

    2018-04-16

    As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

  19. Advanced solar irradiances applied to satellite and ionospheric operational systems

    Science.gov (United States)

    Tobiska, W. Kent; Schunk, Robert; Eccles, Vince; Bouwer, Dave

    Satellite and ionospheric operational systems require solar irradiances in a variety of time scales and spectral formats. We describe the development of a system using operational grade solar irradiances that are applied to empirical thermospheric density models and physics-based ionospheric models used by operational systems that require a space weather characterization. The SOLAR2000 (S2K) and SOLARFLARE (SFLR) models developed by Space Environment Technologies (SET) provide solar irradiances from the soft X-rays (XUV) through the Far Ultraviolet (FUV) spectrum. The irradiances are provided as integrated indices for the JB2006 empirical atmosphere density models and as line/band spectral irradiances for the physics-based Ionosphere Forecast Model (IFM) developed by the Space Environment Corporation (SEC). We describe the integration of these irradiances in historical, current epoch, and forecast modes through the Communication Alert and Prediction System (CAPS). CAPS provides real-time and forecast HF radio availability for global and regional users and global total electron content (TEC) conditions.

  20. Management information system applied to radiation protection services

    International Nuclear Information System (INIS)

    Grossi, Pablo Andrade; Souza, Leonardo Soares de; Figueiredo, Geraldo Magela; Figueiredo, Arthur

    2013-01-01

    An effective management information system based on technology, information and people is necessary to improve the safety on all processes and operations subjected to radiation risks. The complex and multisource information flux from all radiation protection activities on nuclear organizations requires a robust tool/system to highlight the strengths and weaknesses and identify behaviors and trends on the activities requiring radiation protection programs. Those organized and processed data are useful to reach a successful management and to support the human decision-making on nuclear organization. This paper presents recent improvements on a management information system based on the radiation protection directives and regulations from Brazilian regulatory body. This radiation protection control system is applied to any radiation protection services and research institutes subjected to Brazilian nuclear regulation and is a powerful tool for continuous management, not only indicating how the health and safety activities are going, but why they are not going as well as planned showing up the critical points. (author)

  1. Management information system applied to radiation protection services

    Energy Technology Data Exchange (ETDEWEB)

    Grossi, Pablo Andrade; Souza, Leonardo Soares de; Figueiredo, Geraldo Magela; Figueiredo, Arthur, E-mail: pabloag@cdtn.br, E-mail: lss@cdtn.br, E-mail: gmf@cdtn.br, E-mail: arthurqof@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2013-07-01

    An effective management information system based on technology, information and people is necessary to improve the safety on all processes and operations subjected to radiation risks. The complex and multisource information flux from all radiation protection activities on nuclear organizations requires a robust tool/system to highlight the strengths and weaknesses and identify behaviors and trends on the activities requiring radiation protection programs. Those organized and processed data are useful to reach a successful management and to support the human decision-making on nuclear organization. This paper presents recent improvements on a management information system based on the radiation protection directives and regulations from Brazilian regulatory body. This radiation protection control system is applied to any radiation protection services and research institutes subjected to Brazilian nuclear regulation and is a powerful tool for continuous management, not only indicating how the health and safety activities are going, but why they are not going as well as planned showing up the critical points. (author)

  2. Applying of component system development in object methodology, case study

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    Full Text Available To create computarization target software as a component system has been a very strong requirement for the last 20 years of software developing. Finally, the architectural components are self-contained units, presenting not only partial and overall system behavior, but also cooperating with each other on the basis of their interfaces. Among others, components have allowed flexible modification of processes the behavior of which is the foundation of components behavior without changing the life of the component system. On the other hand, the component system makes it possible, at design time, to create numerous new connections between components and thus creating modified system behaviors. This all enables the company management to perform, at design time, required behavioral changes of processes in accordance with the requirements of changing production and market.The development of software which is generally referred to as SDP (Software Development Process contains two directions. The first one, called CBD (Component–Based Development, is dedicated to the development of component–based systems CBS (Component–based System, the second target is the development of software under the influence of SOA (Service–Oriented Architecture. Both directions are equipped with their different development methodologies. The subject of this paper is only the first direction and application of development of component–based systems in its object–oriented methodologies. The requirement of today is to carry out the development of component-based systems in the framework of developed object–oriented methodologies precisely in the way of a dominant style. In some of the known methodologies, however, this development is not completely transparent and is not even recognized as dominant. In some cases, it is corrected by the special meta–integration models of component system development into an object methodology.This paper presents a case study

  3. Hyperspectral imaging applied to complex particulate solids systems

    Science.gov (United States)

    Bonifazi, Giuseppe; Serranti, Silvia

    2008-04-01

    HyperSpectral Imaging (HSI) is based on the utilization of an integrated hardware and software (HW&SW) platform embedding conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Although HSI was originally developed for remote sensing, it has recently emerged as a powerful process analytical tool, for non-destructive analysis, in many research and industrial sectors. The possibility to apply on-line HSI based techniques in order to identify and quantify specific particulate solid systems characteristics is presented and critically evaluated. The originally developed HSI based logics can be profitably applied in order to develop fast, reliable and lowcost strategies for: i) quality control of particulate products that must comply with specific chemical, physical and biological constraints, ii) performance evaluation of manufacturing strategies related to processing chains and/or realtime tuning of operative variables and iii) classification-sorting actions addressed to recognize and separate different particulate solid products. Case studies, related to recent advances in the application of HSI to different industrial sectors, as agriculture, food, pharmaceuticals, solid waste handling and recycling, etc. and addressed to specific goals as contaminant detection, defect identification, constituent analysis and quality evaluation are described, according to authors' originally developed application.

  4. Barometric altimetry system as virtual constellation applied in CAPS

    Science.gov (United States)

    Ai, Guoxiang; Sheng, Peixuan; Du, Jinlin; Zheng, Yongguang; Cai, Xiande; Wu, Haitao; Hu, Yonghui; Hua, Yu; Li, Xiaohui

    2009-03-01

    This work describes the barometric altimetry as virtual constellation applied to the Chinese Area Positioning System (CAPS), which uses the transponders of communication satellites to transfer navigation messages to users. Barometric altimetry depends on the relationship of air pressure varying with altitude in the Earth’s atmosphere. Once the air pressure at a location is measured the site altitude can be found. This method is able to enhance and improve the availability of three-dimensional positioning. The difficulty is that the relation between barometric pressure and altitude is variable in different areas and under various weather conditions. Hence, in order to obtain higher accuracy, we need to acquire the real-time air pressure corresponding to an altimetric region’s reference height. On the other hand, the altimetry method will be applied to satellite navigation system, but the greatest difficulty lies in how to get the real-time air pressure value at the reference height in the broad areas overlaid by satellite navigation. We propose an innovational method to solve this problem. It is to collect the real-time air pressures and temperatures of the 1860 known-altitude weather observatories over China and around via satellite communication and to carry out time extrapolation forecast uniformly. To reduce data quantity, we first partition the data and encode them and then broadcast these information via navigation message to CAPS users’ receivers. Upon the interpolations being done in receivers, the reference air pressure and temperature at the receiver’s nearby place is derived. Lastly, combing with the receiver-observed real air pressure and temperature, the site’s altitude can be determined. The work is presented in the following aspects: the calculation principle, formulae, data collection, encoding, prediction, interpolation method, navigation message transmission together with errors causes and analyses. The advantages and shortcomings of the

  5. The Gtz system management applied to photovoltaic rural electrification projects

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, Pablo [Brendel Proper, (Bolivia)]|[GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

    1995-12-31

    The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

  6. The Gtz system management applied to photovoltaic rural electrification projects

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, Pablo [Brendel Proper, (Bolivia); [GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

    1996-12-31

    The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

  7. Advanced imaging systems for diagnostic investigations applied to Cultural Heritage

    International Nuclear Information System (INIS)

    Peccenini, E; Bettuzzi, M; Brancaccio, R; Casali, F; Morigi, M P; Albertin, F; Petrucci, F

    2014-01-01

    The diagnostic investigations are an important resource in the studies on Cultural Heritage to enhance the knowledge on execution techniques, materials and conservation status of a work of art. In this field, due to the great historical and artistic value of the objects, preservation is the main concern; for this reason, new technological equipment has been designed and developed in the Physics Departments of the Universities of Ferrara and Bologna to enhance the non-invasive approach to the study of pictorial artworks and other objects of cultural interest. Infrared (IR) reflectography, X-ray radiography and computed tomography (CT), applied to works of art, are joined by the same goal: to get hidden information on execution techniques and inner structure pursuing the non-invasiveness of the methods, although using different setup and physical principles. In this work transportable imaging systems to investigate large objects in museums and galleries are presented. In particular, 2D scanning devices for IR reflectography and X-ray radiography, CT systems and some applications to the Cultural Heritage are described

  8. Advanced imaging systems for diagnostic investigations applied to Cultural Heritage

    Science.gov (United States)

    Peccenini, E.; Albertin, F.; Bettuzzi, M.; Brancaccio, R.; Casali, F.; Morigi, M. P.; Petrucci, F.

    2014-12-01

    The diagnostic investigations are an important resource in the studies on Cultural Heritage to enhance the knowledge on execution techniques, materials and conservation status of a work of art. In this field, due to the great historical and artistic value of the objects, preservation is the main concern; for this reason, new technological equipment has been designed and developed in the Physics Departments of the Universities of Ferrara and Bologna to enhance the non-invasive approach to the study of pictorial artworks and other objects of cultural interest. Infrared (IR) reflectography, X-ray radiography and computed tomography (CT), applied to works of art, are joined by the same goal: to get hidden information on execution techniques and inner structure pursuing the non-invasiveness of the methods, although using different setup and physical principles. In this work transportable imaging systems to investigate large objects in museums and galleries are presented. In particular, 2D scanning devices for IR reflectography and X-ray radiography, CT systems and some applications to the Cultural Heritage are described.

  9. Adaptive Robotic Systems Design in University of Applied Sciences

    Directory of Open Access Journals (Sweden)

    Gunsing Jos

    2016-01-01

    Full Text Available In the industry for highly specialized machine building (small series with high variety and high complexity and in healthcare a demand for adaptive robotics is rapidly coming up. Technically skilled people are not always available in sufficient numbers. A lot of know how with respect to the required technologies is available but successful adaptive robotic system designs are still rare. In our research at the university of applied sciences we incorporate new available technologies in our education courses by way of research projects; in these projects students will investigate the application possibilities of new technologies together with companies and teachers. Thus we are able to transfer knowledge to the students including an innovation oriented attitude and skills. Last years we developed several industrial binpicking applications for logistics and machining-factories with different types of 3D vision. Also force feedback gripping has been developed including slip sensing. Especially for healthcare robotics we developed a so-called twisted wire actuator, which is very compact in combination with an underactuated gripper, manufactured in one piece in polyurethane. We work both on modeling and testing the functions of these designs but we work also on complete demonstrator systems. Since the amount of disciplines involved in complex product and machine design increases rapidly we pay a lot of attention with respect to systems engineering methods. Apart from the classical engineering disciplines like mechanical, electrical, software and mechatronics engineering, especially for adaptive robotics more and more disciplines like industrial product design, communication … multimedia design and of course physics and even art are to be involved depending on the specific application to be designed. Design tools like V-model, agile/scrum and design-approaches to obtain the best set of requirements are being implemented in the engineering studies from

  10. Applying of component system development in object methodology

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    -oriented methodology (Arlo, Neust, 2007, (Kan, Müller, 2005, (​​Krutch, 2003 for problem domains with double-layer process logic. There is indicated an integration method, based on a certain meta-model (Applying of the Component system Development in object Methodology and leading to the component system formation. The mentioned meta-model is divided into partial workflows that are located in different stages of a classic object process-based methodology. Into account there are taken the consistency of the input and output artifacts in working practices of the meta-model and mentioned object methodology. This paper focuses on static component systems that are starting to explore dynamic and mobile component systems.In addition, in the contribution the component system is understood as a specific system, for its system properties and basic terms notation being used a set and graph and system algebra.

  11. Gauge/gravity duality applied to condensed matter systems

    International Nuclear Information System (INIS)

    Ammon, Martin Matthias

    2010-01-01

    DE024486693In the present thesis by means of the AdS/CFT correspondence phenomena of strongly coupled quantum critical systems are studied. Hereby the assumption developed 1997 by Maldacena puts four-dimensional N=4 supersymmetric Yang-Mills theory and type IIB supergravity in the five-dimensional anti-de Sitter space in relation. This assumption can be generalized in different ways. So on the gauge-theory side states with finite temperature and density can be considered or degrees of freedom added, which transform in the fundamental representation of the gauge group, the so-called flavor degrees of freedom. These deformations of the correspondence are applied in the present thesis in order to understand better strongly coupled systems in the neighbourhood of quantum-critical points. We approximate hereby the field theory at the quantum-critical point by N=4 supersymmetric Yang-Mills theory. The charge carriers of the system are introduced by supersymmetric flavor fields. For instance in the present thesis in the case of two flavor fields, which have the same mass, a chemical potential for the isospin is considered and the phase diagram studied. The isospin-chemical potential breaks hereby the non-Abelian part of the flavor symmetry SU(2) to U(1). If a critical value of the isospin-chemical potential is exceeded, so shows our calculation, that the strongly coupled system becomes unstable against fluctuations. A new thermodynamically favorized state is formed. This state breaks the residual U(1) flavor symmetry spontaneously and can therefore be considered as a superfluid. If U(1) is gauged, by this way a superconductor is obtained. The AC conductivity goes in the superconducting phase for small frequencies to zero. The DC conductivity however is infinite. Furthermore we calculate the Fermi surface in the superconducting phase. Furthermore a holographic method for the calculation of the DC conductivity in arbitrarily constant electric and magnetic fields is further

  12. Gauge/gravity duality applied to condensed matter systems

    Energy Technology Data Exchange (ETDEWEB)

    Ammon, Martin Matthias

    2010-07-07

    DE024486693In the present thesis by means of the AdS/CFT correspondence phenomena of strongly coupled quantum critical systems are studied. Hereby the assumption developed 1997 by Maldacena puts four-dimensional N=4 supersymmetric Yang-Mills theory and type IIB supergravity in the five-dimensional anti-de Sitter space in relation. This assumption can be generalized in different ways. So on the gauge-theory side states with finite temperature and density can be considered or degrees of freedom added, which transform in the fundamental representation of the gauge group, the so-called flavor degrees of freedom. These deformations of the correspondence are applied in the present thesis in order to understand better strongly coupled systems in the neighbourhood of quantum-critical points. We approximate hereby the field theory at the quantum-critical point by N=4 supersymmetric Yang-Mills theory. The charge carriers of the system are introduced by supersymmetric flavor fields. For instance in the present thesis in the case of two flavor fields, which have the same mass, a chemical potential for the isospin is considered and the phase diagram studied. The isospin-chemical potential breaks hereby the non-Abelian part of the flavor symmetry SU(2) to U(1). If a critical value of the isospin-chemical potential is exceeded, so shows our calculation, that the strongly coupled system becomes unstable against fluctuations. A new thermodynamically favorized state is formed. This state breaks the residual U(1) flavor symmetry spontaneously and can therefore be considered as a superfluid. If U(1) is gauged, by this way a superconductor is obtained. The AC conductivity goes in the superconducting phase for small frequencies to zero. The DC conductivity however is infinite. Furthermore we calculate the Fermi surface in the superconducting phase. Furthermore a holographic method for the calculation of the DC conductivity in arbitrarily constant electric and magnetic fields is further

  13. Toward a Blended Ontology: Applying Knowledge Systems to ...

    Science.gov (United States)

    Bionanomedicine and environmental research share need common terms and ontologies. This study applied knowledge systems, data mining, and bibliometrics used in nano-scale ADME research from 1991 to 2011. The prominence of nano-ADME in environmental research began to exceed the publication rate in medical research in 2006. That trend appears to continue as a result of the growing products in commerce using nanotechnology, that is, 5-fold growth in number of countries with nanomaterials research centers. Funding for this research virtually did not exist prior to 2002, whereas today both medical and environmental research is funded globally. Key nanoparticle research began with pharmacology and therapeutic drug-delivery and contrasting agents, but the advances have found utility in the environmental research community. As evidence ultrafine aerosols and aquatic colloids research increased 6-fold, indicating a new emphasis on environmental nanotoxicology. User-directed expert elicitation from the engineering and chemical/ADME domains can be combined with appropriate Boolean logic and queries to define the corpus of nanoparticle interest. The study combined pharmacological expertise and informatics to identify the corpus by building logical conclusions and observations. Publication records informatics can lead to an enhanced understanding the connectivity between fields, as well as overcoming the differences in ontology between the fields. The National Exposure Resea

  14. Multisphere system neutron spectrometry applied to dosimetry for the personnel

    International Nuclear Information System (INIS)

    Allinei, P.G.

    1992-01-01

    Neutron dosimetry is a necessity that must be dealt with in order to ensure efficient monitoring of all personnel regarding radiology safety. Dosimetric variables are difficult to measure for they are dependent on complex functions evolving with the energy of neutrons, which forces us to determine their energetic distribution. We have chosen to use the multisphere system associated to an unfolding code in order to perform neutron spectrometry, our purpose being to determine these dosimetric variables. The initial stage consists in modifying a research code, the code SOHO, in order to adapt it to our needs. The resulting new version was subsequently tested and proven successful by means of computerized simulations. Afterwards, we used reference dosimetric and spectral beams to confirm the position results previously obtained. At the time of this test, the code SOHO yielded results coherent with the theoretical values, and even allowed the quantity of radiation diffused by the laboratory structures to be estimated. The final part of this study consists in applying the previously perfected technique to authentic situations. The results thus obtained are compared to those obtained by conventional methods in order to reveal the interest of neutron spectrometry used for dosimetry of the personnel

  15. Improved self-management of datacenter systems applying machine learning

    OpenAIRE

    Berral García, Josep Lluís

    2013-01-01

    Autonomic Computing is a Computer Science and Technologies research area, originated during mid 2000's. It focuses on optimization and improvement of complex distributed computing systems through self-control and self-management. As distributed computing systems grow in complexity, like multi-datacenter systems in cloud computing, the system operators and architects need more help to understand, design and optimize manually these systems, even more when these systems are distributed along the...

  16. Memory function formalism applied to electronic transport in disordered systems

    International Nuclear Information System (INIS)

    Cunha Lima, I.C. da

    1984-01-01

    Memory function formalism is briefly reviewed and applied to electronic transport using the projection operator technique. The resistivity of a disordered 2-D electron gas under strong magnetic field is obtained in terms of force-force correlation function. (Author) [pt

  17. Information Management Principles Applied to the Ballistic Missile Defense System

    Science.gov (United States)

    2007-03-01

    of a BMDS. From this, the Army produced the Nike -Zeus system comprised of four radars, the Zeus missile, and a computer fire control system (General...made the Nike -Zeus our first National Missile Defense (NMD) system named Sentinel. The architecture was to cover 14 locations, 10 of which were...1999). Additionally, there are cultural impacts (Gordon & Gordon, 1999). A company choosing an Apple OS may have to wage a big fight against the

  18. VHDL basics applied design by SIPAC qualification system

    International Nuclear Information System (INIS)

    Park, In Ha; Mun, Da Cheol; Lee, Gwang Yeob

    2005-12-01

    This book has six chapters, which are about Flowrian of SIPAC qualification system including internet CAD system and remote server service, logic circuit on design and qualification of device such as gate circuit, multiplex and decoder, order logic circuit with D type flip-flop design and qualification and Rom and RAM's design and qualification, finite state machine such as odd checker, sequence detector, test clock generator and traffic light controller, design and qualification about data path, design of application circuit. It has two appendixes on install and the way to use SIPAC qualification system and remote service for SIPAC qualification system.

  19. Expert systems as applied to bridges and pavements : an overview.

    Science.gov (United States)

    1986-01-01

    Expert systems is a rapidly emerging new application of computers to aid decision makers in solving problems. This report gives an overview of what expert systems are and of what use they may be to a transportation department. The focus of the applic...

  20. Modular Modelling and Simulation Approach - Applied to Refrigeration Systems

    DEFF Research Database (Denmark)

    Sørensen, Kresten Kjær; Stoustrup, Jakob

    2008-01-01

    This paper presents an approach to modelling and simulation of the thermal dynamics of a refrigeration system, specifically a reefer container. A modular approach is used and the objective is to increase the speed and flexibility of the developed simulation environment. The refrigeration system...

  1. Applying cognitive system engineering to cope with complexity in enterprises

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2012-08-01

    Full Text Available , in the environment and inside the enterprise itself. The enterprise therefore requires a management system, similar to a military Command and Control (C2) system, to monitor the status of the enterprise as well as the environment. The ability of an enterprise...

  2. Embarked diagnosis applied to a mechanical system "diesel engine ...

    African Journals Online (AJOL)

    The implementation of OBD (on-board diagnostic) systems for diesel engines has become an unavoidable necessity. From the models described in the literature, the latest generation diesel engine models as well as defects affecting it were established. A board diagnostic system based on the use of fuzzy pattern ...

  3. Applying an Activity System to Online Collaborative Group Work Analysis

    Science.gov (United States)

    Choi, Hyungshin; Kang, Myunghee

    2010-01-01

    This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

  4. Applying Formal Verification Techniques to Ambient Assisted Living Systems

    Science.gov (United States)

    Benghazi, Kawtar; Visitación Hurtado, María; Rodríguez, María Luisa; Noguera, Manuel

    This paper presents a verification approach based on timed traces semantics and MEDISTAM-RT [1] to check the fulfillment of non-functional requirements, such as timeliness and safety, and assure the correct functioning of the Ambient Assisted Living (AAL) systems. We validate this approach by its application to an Emergency Assistance System for monitoring people suffering from cardiac alteration with syncope.

  5. Power electronics applied to industrial systems and transports

    CERN Document Server

    Patin, Nicolas

    2015-01-01

    Power electronics is based on the switching operating mode of semiconductor components. On this basis, the concepts of type (voltage or current) and reversibility of interconnected sources make it possible to apply a methodology for the synthesis of various types of converters. This book also focuses on the importance of packaging by reviewing the electrical representation of components’ thermal models and the currently available electronics’ cooling technologies. Modeling is discussed, as well as different technological aspects used in the engineering design of an electronic power converter, useful for obtaining satisfactory performance and reliability.

  6. Aircraft Electric Propulsion Systems Applied Research at NASA

    Science.gov (United States)

    Clarke, Sean

    2015-01-01

    Researchers at NASA are investigating the potential for electric propulsion systems to revolutionize the design of aircraft from the small-scale general aviation sector to commuter and transport-class vehicles. Electric propulsion provides new degrees of design freedom that may enable opportunities for tightly coupled design and optimization of the propulsion system with the aircraft structure and control systems. This could lead to extraordinary reductions in ownership and operating costs, greenhouse gas emissions, and noise annoyance levels. We are building testbeds, high-fidelity aircraft simulations, and the first highly distributed electric inhabited flight test vehicle to begin to explore these opportunities.

  7. Fuzzy Logic Applied to an Oven Temperature Control System

    Directory of Open Access Journals (Sweden)

    Nagabhushana KATTE

    2011-10-01

    Full Text Available The paper describes the methodology of design and development of fuzzy logic based oven temperature control system. As simple fuzzy logic controller (FLC structure with an efficient realization and a small rule base that can be easily implemented in existing underwater control systems is proposed. The FLC has been designed using bell-shaped membership function for fuzzification, 49 control rules in its rule base and centre of gravity technique for defuzzification. Analog interface card with 16-bits resolution is designed to achieve higher precision in temperature measurement and control. The experimental results of PID and FLC implemented system are drawn for a step input and presented in a comparative fashion. FLC exhibits fast response and it has got sharp rise time and smooth control over conventional PID controller. The paper scrupulously discusses the hardware and software (developed using ‘C’ language features of the system.

  8. Applying of forecasting at decision making in power systems

    International Nuclear Information System (INIS)

    Sapundjiev, G.

    2007-01-01

    The problems concerning forecast and decision making are analyzed. The typical tasks arising in the forecasting process of the power systems with hierarchical structure formulated and brought to formal description

  9. Physiology for engineers applying engineering methods to physiological systems

    CERN Document Server

    Chappell, Michael

    2016-01-01

    This book provides an introduction to qualitative and quantitative aspects of human physiology. It looks at biological and physiological processes and phenomena, including a selection of mathematical models, showing how physiological problems can be mathematically formulated and studied. It also illustrates how a wide range of engineering and physics topics, including electronics, fluid dynamics, solid mechanics and control theory can be used to describe and understand physiological processes and systems. Throughout the text there are introductions to measuring and quantifying physiological processes using both signal and imaging technologies. Physiology for Engineers describes the basic structure and models of cellular systems, the structure and function of the cardiovascular system, the electrical and mechanical activity of the heart and provides an overview of the structure and function of the respiratory and nervous systems. It also includes an introduction to the basic concepts and applications of reacti...

  10. Information Management Principles Applied to the Ballistic Missile Defense System

    National Research Council Canada - National Science Library

    Koehler, John M

    2007-01-01

    .... Similarly several military systems with the single mission of missile defense have evolved in service stovepipes, and are now being integrated into a national and global missile defense architecture...

  11. Information Management Principles Applied to the Ballistic Missile Defense System

    National Research Council Canada - National Science Library

    Koehler, John M

    2007-01-01

    Information systems (IS) have evolved over the last 50 plus years from individual components with single functionality to grand architectures that integrate multiple individual business functions into global organizational enterprises...

  12. Applying systems engineering principles towards developing defence capabilities

    CSIR Research Space (South Africa)

    Smith, CJ

    2011-09-01

    Full Text Available responsibility is creating and executing an interdisciplinary process to ensure that the customer and stakeholders? needs are satisfied in a high quality, trustworthy, cost efficient and schedule compliant manner throughout a system?s entire life cycle... in the As-Is J Ops capability arising from factors such as changes in the operational environment (threat, theatres of operation, etc.), new technology insertion and obsolescence can be identified. These capability gaps are analysed in the Capability...

  13. A generalization information management system applied to electrical distribution

    Energy Technology Data Exchange (ETDEWEB)

    Geisler, K.I.; Neumann, S.A.; Nielsen, T.D.; Bower, P.K. (Empros Systems International (US)); Hughes, B.A.

    1990-07-01

    This article presents a system solution approach that meets the requirements being imposed by industry trends and the electric utility customer. Specifically, the solution addresses electric distribution management systems. Electrical distribution management is a particularly well suited area of application because it involves a high diversity of tasks, which are currently supported by a proliferation of automated islands. Islands of automation which currently exist include (among others) distribution operations, load management, automated mapping, facility management, work order processing, and planning.

  14. Applied patent RFID systems for building reacting HEPA air ventilation system in hospital operation rooms.

    Science.gov (United States)

    Lin, Jesun; Pai, Jar-Yuan; Chen, Chih-Cheng

    2012-12-01

    RFID technology, an automatic identification and data capture technology to provide identification, tracing, security and so on, was widely applied to healthcare industry in these years. Employing HEPA ventilation system in hospital is a way to ensure healthful indoor air quality to protect patients and healthcare workers against hospital-acquired infections. However, the system consumes lots of electricity which cost a lot. This study aims to apply the RFID technology to offer a unique medical staff and patient identification, and reacting HEPA air ventilation system in order to reduce the cost, save energy and prevent the prevalence of hospital-acquired infection. The system, reacting HEPA air ventilation system, contains RFID tags (for medical staffs and patients), sensor, and reacting system which receives the information regarding the number of medical staff and the status of the surgery, and controls the air volume of the HEPA air ventilation system accordingly. A pilot program was carried out in a unit of operation rooms of a medical center with 1,500 beds located in central Taiwan from Jan to Aug 2010. The results found the air ventilation system was able to function much more efficiently with less energy consumed. Furthermore, the indoor air quality could still keep qualified and hospital-acquired infection or other occupational diseases could be prevented.

  15. Economical wind powered bioventing systems successfully applied at remote locations

    International Nuclear Information System (INIS)

    Graves, D.; Wilson, B.; Walker, K.

    1996-01-01

    Wind-powered bioventing systems were designed to operate at remote locations in the absence of electrical power. Laboratory measurements of soil respiration under bioventing conditions indicated the biodegradation of up to 25 mg of weathered diesel per kg of site soil per day. Further testing demonstrated the potential for harnessing wind-power to stimulate air movement through vadose zone soil. Several wind-powered bioventing systems were installed near Nome, Alaska. In situ respiration tests, soil gas composition measurements and measurable pressure changes in the soil indicated that the systems were capable of aerating the soil. Diesel range oil measurements indicated contaminant reductions up to 90% after only two treatments seasons. The results demonstrate the effectiveness of wind-powered biovents. The low cost, low maintenance, and simplicity of the biovents make them a very attractive treatment option for windy, remote sites with unsaturated soil impacted by biodegradable contaminants

  16. Multi-agent cooperative systems applied to precision applications

    International Nuclear Information System (INIS)

    McKay, M.D.; Anderson, M.O.; Gunderson, R.W.; Flann, N.; Abbott, B.

    1998-01-01

    Regulatory agencies are imposing limits and constraints to protect the operator and/or the environment. While generally necessary, these controls also tend to increase cost and decrease efficiency and productivity. Intelligent computer systems can be made to perform these hazardous tasks with greater efficiency and precision without danger to the operators. The Idaho national Engineering and Environmental Laboratory and the Center for Self-Organizing and Intelligent Systems at Utah State University have developed a series of autonomous all-terrain multi-agent systems capable of performing automated tasks within hazardous environments. This paper discusses the development and application of cooperative small-scale and large-scale robots for use in various activities associated with radiologically contaminated areas, prescription farming, and unexploded ordinances

  17. Applying machine learning to build a website interface adaptation system

    OpenAIRE

    MATESHUK EGOR; CHERNYSHEV ALEXANDER

    2015-01-01

    In this article we present the architecture and model of a website interface optimization system. We describe how we use clustering and genetic algorithms to automatically select a website interface with the highest conversion from website visitor to website user. In particular, we describe an algorithm for streamed clustering, which allows for real-time analysis of high traffic website users.

  18. The ordering operator technique applied to open systems

    International Nuclear Information System (INIS)

    Pedrosa, I.A.; Baseia, B.

    1982-01-01

    A normal ordering technique and the coherent representation are used to discribe the time evolution of an open system of a single oscillator, linearly coupled with an infinite number of reservoir oscillators and it is shown how to include the dissipation and get the exponential decay. (Author) [pt

  19. Applied Bounded Model Checking for Interlocking System Designs

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Peleska, Jan; Pinger, Ralf

    2014-01-01

    In this paper the verification and validation of interlocking systems is investigated. Reviewing both geographical and route-related interlocking, the verification objectives can be structured from a perspective of computer science into (1) verification of static semantics, and (2) verification o...

  20. Applied Bounded Model Checking for Interlocking System Designs

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Peleska, Jan; Pinger, Ralf

    2013-01-01

    In this article the verification and validation of interlocking systems is investigated. Reviewing both geographical and route-related interlocking, the verification objectives can be structured from a perspective of computer science into (1) verification of static semantics, and (2) verification...

  1. Fuzzy control applied to nuclear power plant pressurizer system

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Mauro V.; Almeida, Jose C.S., E-mail: mvitor@ien.gov.b, E-mail: jcsa@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2011-07-01

    In a pressurized water reactor (PWR) nuclear power plants (NPPs) the pressure control in the primary loop is very important for keeping the reactor in a safety condition and improve the generation process efficiency. The main component responsible for this task is the pressurizer. The pressurizer pressure control system (PPCS) utilizes heaters and spray valves to maintain the pressure within an operating band during steady state conditions, and limits the pressure changes, during transient conditions. Relief and safety valves provide overpressure protection for the reactor coolant system (RCS) to ensure system integrity. Various protective reactor trips are generated if the system parameters exceed safe bounds. Historically, a proportional-integral derivative (PID) controller is used in PWRs to keep the pressure in the set point, during those operation conditions. The purpose of this study has two main goals: first is to develop a pressurizer model based on artificial neural networks (ANNs); second is to develop a fuzzy controller for the PWR pressurizer pressure, and compare its performance with the P controller. Data from a simulator PWR plant was used to test the ANN and the controllers as well. The reference simulator is a Westinghouse 3-loop PWR plant with a total thermal output of 2785 MWth. The simulation results show that the pressurizer ANN model response are in reasonable agreement with the simulated power plant, and the fuzzy controller built in this study has better performance compared to the P controller. (author)

  2. Fuzzy control applied to nuclear power plant pressurizer system

    International Nuclear Information System (INIS)

    Oliveira, Mauro V.; Almeida, Jose C.S.

    2011-01-01

    In a pressurized water reactor (PWR) nuclear power plants (NPPs) the pressure control in the primary loop is very important for keeping the reactor in a safety condition and improve the generation process efficiency. The main component responsible for this task is the pressurizer. The pressurizer pressure control system (PPCS) utilizes heaters and spray valves to maintain the pressure within an operating band during steady state conditions, and limits the pressure changes, during transient conditions. Relief and safety valves provide overpressure protection for the reactor coolant system (RCS) to ensure system integrity. Various protective reactor trips are generated if the system parameters exceed safe bounds. Historically, a proportional-integral derivative (PID) controller is used in PWRs to keep the pressure in the set point, during those operation conditions. The purpose of this study has two main goals: first is to develop a pressurizer model based on artificial neural networks (ANNs); second is to develop a fuzzy controller for the PWR pressurizer pressure, and compare its performance with the P controller. Data from a simulator PWR plant was used to test the ANN and the controllers as well. The reference simulator is a Westinghouse 3-loop PWR plant with a total thermal output of 2785 MWth. The simulation results show that the pressurizer ANN model response are in reasonable agreement with the simulated power plant, and the fuzzy controller built in this study has better performance compared to the P controller. (author)

  3. Adaptive Wavelet Coding Applied in a Wireless Control System.

    Science.gov (United States)

    Gama, Felipe O S; Silveira, Luiz F Q; Salazar, Andrés O

    2017-12-13

    Wireless control systems can sense, control and act on the information exchanged between the wireless sensor nodes in a control loop. However, the exchanged information becomes susceptible to the degenerative effects produced by the multipath propagation. In order to minimize the destructive effects characteristic of wireless channels, several techniques have been investigated recently. Among them, wavelet coding is a good alternative for wireless communications for its robustness to the effects of multipath and its low computational complexity. This work proposes an adaptive wavelet coding whose parameters of code rate and signal constellation can vary according to the fading level and evaluates the use of this transmission system in a control loop implemented by wireless sensor nodes. The performance of the adaptive system was evaluated in terms of bit error rate (BER) versus E b / N 0 and spectral efficiency, considering a time-varying channel with flat Rayleigh fading, and in terms of processing overhead on a control system with wireless communication. The results obtained through computational simulations and experimental tests show performance gains obtained by insertion of the adaptive wavelet coding in a control loop with nodes interconnected by wireless link. These results enable the use of this technique in a wireless link control loop.

  4. An expert system as applied to bridges : software development phase.

    Science.gov (United States)

    1989-01-01

    This report describes the results of the third of a four-part study dealing with the use of a computerized expert system to assist bridge engineers in their structures management program. In this phase of the study, software (called DOBES) was writte...

  5. Adaptive Wavelet Coding Applied in a Wireless Control System

    Directory of Open Access Journals (Sweden)

    Felipe O. S. Gama

    2017-12-01

    Full Text Available Wireless control systems can sense, control and act on the information exchanged between the wireless sensor nodes in a control loop. However, the exchanged information becomes susceptible to the degenerative effects produced by the multipath propagation. In order to minimize the destructive effects characteristic of wireless channels, several techniques have been investigated recently. Among them, wavelet coding is a good alternative for wireless communications for its robustness to the effects of multipath and its low computational complexity. This work proposes an adaptive wavelet coding whose parameters of code rate and signal constellation can vary according to the fading level and evaluates the use of this transmission system in a control loop implemented by wireless sensor nodes. The performance of the adaptive system was evaluated in terms of bit error rate (BER versus E b / N 0 and spectral efficiency, considering a time-varying channel with flat Rayleigh fading, and in terms of processing overhead on a control system with wireless communication. The results obtained through computational simulations and experimental tests show performance gains obtained by insertion of the adaptive wavelet coding in a control loop with nodes interconnected by wireless link. These results enable the use of this technique in a wireless link control loop.

  6. The Wigner distribution function applied to optical signals and systems

    NARCIS (Netherlands)

    Bastiaans, M.J.

    1978-01-01

    In this paper the Wigner distribution function has been introduced for optical signals and systems. The Wigner distribution function of an optical signal appears to be in close resemblance to the ray concept in geometrical optics. This resemblance reaches even farther: although derived from Fourier

  7. Applying intelligent transport systems to manage noise impacts

    NARCIS (Netherlands)

    Wilmink, I.R.; Vonk, T.

    2015-01-01

    This contribution discusses how traffic management, and many other measures that can be categorised as Intelligent Transport Systems (ITS, i.e. all traffic and transport measures that use ICT) can help reduce noise levels by influencing mobility choices and driving behaviour. Several examples of

  8. A transportation security system applying RFID and GPS

    Directory of Open Access Journals (Sweden)

    Ruijian Zhang

    2013-03-01

    Full Text Available Purpose: This paper is about developing a centralized, internet based security tool which utilizes RFID and GPS technology to identify drivers and track the load integrity. Design/methodology/approach: The system will accomplish the security testing in real-time using the internet and the U.S. Customs’ database (ACE. A central database and the interfaces and communication between the database and ACE will be established. After the vehicle is loaded, all openings of the tanker are sealed with disposable RFID tag seals. Findings/value: An RFID reader and GPS tracker wirelessly connected with the databases will serve as testing grounds for the implementation of security measures that can help prevent future terrorist attacks and help in ensuring that the goods and products are not compromised while in transit. The system will also reduce the labor work of security check to its minimum. 

  9. Busy burst technology applied to OFDMA–TDD systems

    OpenAIRE

    Ghimire, Birendra

    2010-01-01

    The most significant bottleneck in wireless communication systems is an ever-increasing disproportion between the bandwidth demand and the available spectrum. A major challenge in the field of wireless communications is to maximise the spatial reuse of resources whilst avoiding detrimental co-channel interference (CCI). To this end, frequency planning and centralised coordination approaches are widely used in wireless networks. However, the networks for the next generation of w...

  10. Monocrystalline silicon solar cells applied in photovoltaic system

    OpenAIRE

    L.A. Dobrzański; A. Drygała; M. Giedroć; M. Macek

    2012-01-01

    Purpose: The aim of the paper is to fabricate the monocrystalline silicon solar cells using the conventional technology by means of screen printing process and to make of them photovoltaic system.Design/methodology/approach: The investigation of current – voltage characteristic to determinate basic electrical properties of monocrystalline silicon solar cells were investigated under Standard Test Condition. Photovoltaic module was produced from solar cells with the largest short-circuit curren...

  11. Software Systems for Robotics An Applied Research Perspective

    Directory of Open Access Journals (Sweden)

    Greg Broten

    2006-03-01

    Full Text Available Over the past 20 years, Defence Research and Development Canada has developed numerous tele-operated unmanned ground vehicles (UGV, many founded on the ANCÆUS command and control system. This paper relates how long experience with tele-operated UGVs influenced DRDC's shift in focus from tele-operated to autonomous unmanned vehicles (UV, the forces that guided DRDC's development approach and DRDC's experience adapting a specific tool set, MIRO, to a UGV implementation.

  12. Study of thermoelectric systems applied to electric power generation

    International Nuclear Information System (INIS)

    Rodriguez, A.; Vian, J.G.; Astrain, D.; Martinez, A.

    2009-01-01

    A computational model has been developed in order to simulate the thermal and electric behavior of thermoelectric generators. This model solves the nonlinear system of equations of the thermoelectric and heat transfer equations. The inputs of the program are the thermoelectric parameters as a function of temperature and the boundary conditions, (room temperature and residual heat flux). The outputs are the temperature values of all the elements forming the thermoelectric generator, (performance, electric power, voltage and electric current generated). The model solves the equation system using the finite difference method and semi-empirical expressions for the convection coefficients. A thermoelectric electric power generation test bench has been built in order to validate and determine the accuracy of the computational model, which maximum error is lower than 5%. The objective of this study is to create a design tool that allows us to solve the system of equations involved in the electric generation process without needing to impose boundary conditions that are not known in the design phase, such as the temperature of the Peltier modules. With the computational model, we study the influence of the heat flux supplied as well as the room temperature on the electric power generated.

  13. Innovative wave energy device applied to coastal observatory systems

    Science.gov (United States)

    Marcelli, Marco; Bonamano, Simone; Piermattei, Viviana; Scanu, Sergio; Paladini de Mendoza, Francesco; Martellucci, Riccardo; Maximo, Peviani

    2017-04-01

    Marine environment is one of the most promising sources of renewable energy, whose exploitation could have an effect on several application fields. This work presents the design of an innovative device based on the Oscillating Water Column (OWC), that allows to convert wave energy into electricity, suitable for the typical Mediterranean wave climate. The flexibility of the device permits its installation either in deep or shallow waters, with reduced costs of deployment, maintenance and connection to the grid. Furthermore, the replicability of the design allows the device to be installed in array of several number of similar units. The technical concept is to convey the sea water within a vertical pipe, in which the water movements activate a rotor connected to a generator that transforms the energy of the water motion into electricity. The hydrodynamic design of the pipe is built to minimize the losses due to friction and turbulence and to exploit the maximum possible energy from wave motion. The wave energy is directly absorbed by the rotational movement of the turbine blades located in the water itself allowing a further reduction of the energy losses associated with the transformation of the linear water motion into electrical generation in the air phase (typical configuration of the OWC devices). In this work the device components are described considering two possible configurations that use a Wells turbine or a Bulb type turbine. The system can be realized at a low cost, because of the modularity of the device project, which allows large freedom of sizes and placements, being able to be installed both individually and in arrays. The modularity, associated with the fact that the main elements of the system are available on the market, makes the device particularly attractive from the economic point of view. Finally, it is realized with a high constructive flexibility: the proposed system can be transported floating and moored to existing coastal structures or

  14. Advanced Drug Delivery Systems - a Synthetic and Biological Applied Evaluation

    DEFF Research Database (Denmark)

    Bjerg, Lise Nørkjær

    function as the targeting moiety on the surface of the liposomes. Several examples of synthetic procedures known from the literature are presented. The chapter is completed with a study covering the conjugation efficiencies of a variety of chemical functionalities. Large differences are revealed between...... to guide the uptake, in addition to an enzymatically cleavable peptide sequence, whose cleavage would result in removal of the polymer layer as well as uncovering cationic charges on the liposomal surface. These systems were shown to have superior drug efficacy in vitro....

  15. Maintenance resources optimization applied to a manufacturing system

    International Nuclear Information System (INIS)

    Fiori de Castro, Helio; Lucchesi Cavalca, Katia

    2006-01-01

    This paper presents an availability optimization of an engineering system assembled in a series configuration, with redundancy of units and corrective maintenance resources as optimization parameters. The aim is to reach maximum availability, considering as constraints installation and corrective maintenance costs, weight and volume. The optimization method uses a Genetic Algorithm based on biological concepts of species evolution. It is a robust method, as it does not converge to a local optimum. It does not require the use of differential calculus, thus facilitating computational implementation. Results indicate that the methodology is suitable to solve a wide range of engineering design problems involving allocation of redundancies and maintenance resources

  16. Modeling external constraints: Applying expert systems to nuclear plants

    International Nuclear Information System (INIS)

    Beck, C.E.; Behera, A.K.

    1993-01-01

    Artificial Intelligence (AI) applications in nuclear plants have received much attention over the past decade. Specific applications that have been addressed include development of models and knowledge-bases, plant maintenance, operations, procedural guidance, risk assessment, and design tools. This paper examines the issue of external constraints, with a focus on the use of Al and expert systems as design tools. It also provides several suggested methods for addressing these constraints within the Al framework. These methods include a State Matrix scheme, a layered structure for the knowledge base, and application of the dynamic parameter concept

  17. European standards applied by Gas Transmission System Operator

    International Nuclear Information System (INIS)

    Witek, M.; Kuchta, K.; Oleszkiewicz, J.; Teperek, T.

    2005-01-01

    The lecture described actual state of implementation of European standards concerning transmission of natural gas and underlined their importance for proper performance of Transmission System Operator (TSO). European standards implemented to Polish Standards as PN-EN, necessary for TSO, related to design, construction and operation of high pressure gas network were also described. The lecture underlined as well the impact of standards application on preparation process of national regulations. They obligate TSO to create the technical conditions that ensure safety of gas transmission network functioning as well as environmental and surroundings safety. (authors)

  18. Approximation methods applied in assessment of valve system fatigue failure

    International Nuclear Information System (INIS)

    Wszołek, G; Skrobol, A; Czop, P

    2013-01-01

    This paper proposes an analytical tool that supports the design process of a disc spring valve system used in hydraulic dampers. The proposed analytical tool obtains a key design characteristic of a valve, which is the flow rate and the corresponding maximum stress level in the stack of plates. The tool is prepared based on the cases produced by a first-principle model using a finite element approach. The finite element model was calibrated based on experimental results to provide accurate results in the entire range of input parameters.

  19. An applied study using systems engineering methods to prioritize green systems options

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sonya M [Los Alamos National Laboratory; Macdonald, John M [Los Alamos National Laboratory

    2009-01-01

    For many years, there have been questions about the effectiveness of applying different green solutions. If you're building a home and wish to use green technologies, where do you start? While all technologies sound promising, which will perform the best over time? All this has to be considered within the cost and schedule of the project. The amount of information available on the topic can be overwhelming. We seek to examine if Systems Engineering methods can be used to help people choose and prioritize technologies that fit within their project and budget. Several methods are used to gain perspective into how to select the green technologies, such as the Analytic Hierarchy Process (AHP) and Kepner-Tregoe. In our study, subjects applied these methods to analyze cost, schedule, and trade-offs. Results will document whether the experimental approach is applicable to defining system priorities for green technologies.

  20. Gamma-ray scatter methods applied to industrial measurement systems

    Energy Technology Data Exchange (ETDEWEB)

    Holstad, Marie Bueie

    2004-09-01

    Throughout the work presented in this dissertation it has been confirmed that the use of scattered gamma-radiation is a complex but useful tool in industrial measurement science. Scattered radiation has shown to be useful both when traditional measurement principles cannot be used (Chapter 4) and when more information about a system is needed than what is obtained with transmission measurements (Chapter 6). All three main projects (Chapters 4, 5 and 6) confirm that the sensitivity and accuracy of systems based on scattered gamma-radiation depends strongly on the geometry of the setup and that that presence of multiple scattered radiation makes the problems complex. Chapter 4 shows that multiple scattered gamma-radiation can be used for detection of changes in density where the dimensions are too large to use transmitted radiation. There is, however, an upper limit on the thickness of the absorbing medium also when scattered radiation is utilized. As seen in Chapter 5, multiple scattered gamma-radiation can in principle also be used in level gauges with very compact measurement geometries. The main challenges are the sensitivity to interfaces between materials with similar densities and low count rate. These challenges could not be overcome for level measurements in gravitational separator tanks. The results presented in Chapter 6 show that it is feasible to combine transmission and scatter measurements to characterize produced water in the oil and gas industry. (Author)

  1. Applying Real Options for Evaluating Investments in ERP Systems

    Science.gov (United States)

    Nakagane, Jun; Sekozawa, Teruji

    This paper intends to verify effectiveness of real options approach for evaluating investments in Enterprise Resource Planning systems (ERP) and proves how important it is to disclose shadow options potentially embedded in ERP investment. The net present value (NPV) method is principally adopted to evaluate the value of ERP. However, the NPV method assumes no uncertainties exist in the object. It doesn't satisfy the current business circumstances which are filled with dynamic issues. Since the 1990s the effectiveness of option pricing models for Information System (IS) investment to solve issues in the NPV method has been discussed in the IS literature. This paper presents 3 business cases to review the practical advantages of such techniques for IS investments, especially ERP investments. The first case is EDI development. We evaluate the project by a new approach with lighting one of shadow options, EDI implementation. In the second case we reveal an ERP investment has an “expanding option” in a case of eliminating redundancy. The third case describes an option to contract which is deliberately slotted in ERP development to prepare transferring a manufacturing facility.

  2. Environmental system applied to radioactive liquid effluent release

    International Nuclear Information System (INIS)

    Nisti, Marcelo Bessa

    2009-01-01

    The current environmental administration considers the productive activity as an environmental system, defined as a group of processes, interactions, parameters and factors involved in the production. This mastering dissertation evaluated the release of the liquid radioactive effluents at Instituto de Pesquisas Energeticas e Nucleares (IPEN), under a systemic environmental study. The study evaluated the source term at IPEN in the period from 2004 to 2008, making use of gamma-ray and alpha spectrometry, instrumental neutron activation analysis, liquid phase scintillation and atomic absorption spectrometry. The employed methodologies were verified using samples from the Intercomparison National Program - PNI/IRD and Reference Materials. The facilities that contributed the most in these releases were the Radiopharmaceutical Center (CR) and the Research Reactor Center (CRPq) with an average of 11,4% and 87,4%, respectively, relative to the present radioactive activity. The sewer system releases were within the radioactive protection regulations, showing the effectiveness of IPEN's Radioactive Effluents Monitoring Program. The concentration of the stable elements Ag, Cd, Cr, Fe, Mn, Ni, Pb and Zn was determined in the liquid effluent in ali the samples from the storage tanks TR1 and CR in the period from 2004 to 2008 and in some of the samples of other IPEN's facilities in the period from 2004 to 2007. Among the analyzed effluents, two samples were higher than the stable elements discharge standards established in the state of Sao Paulo, one sample was higher than the required value of the element cadmium and the other higher than required value of the element zinco The storage tank TR1 discharge flow was estimated in 10,9 ± 0,9 m3 h -1 . The dilution factor at discharge point E1 was estimated using a radiotracers the isotopes 3 H, 137 CS, 60 Co, 54 Mn and 65 Zn, which are commonly released into IPEN's sewer system. The executed radiotracer study was carried out

  3. Near-infrared radiation curable multilayer coating systems and methods for applying same

    Science.gov (United States)

    Bowman, Mark P; Verdun, Shelley D; Post, Gordon L

    2015-04-28

    Multilayer coating systems, methods of applying and related substrates are disclosed. The coating system may comprise a first coating comprising a near-IR absorber, and a second coating deposited on a least a portion of the first coating. Methods of applying a multilayer coating composition to a substrate may comprise applying a first coating comprising a near-IR absorber, applying a second coating over at least a portion of the first coating and curing the coating with near infrared radiation.

  4. Kalman filtering applied to a reagent feed system

    International Nuclear Information System (INIS)

    Griffin, C.D.; Croson, D.V.; Feeley, J.J.

    1988-01-01

    Using a Kalman filter solves a troublesome measurement noise problem and, at the same time, improves nuclear safety by detecting leaks to the process' feed tanks. To demonstrate how this technology of optimal estimation can be exploited, this article presents a systematic plan and example of how a Kalman filter was proven in industrial use on a reagent analyzer. A process to recycle uranium from spent fuel elements uses a reagent stream containing boron to dissolve the fuel. The boron is the neutron poison that prevents a nuclear chain reaction during the uranium dissolution. The purpose of the Kalman filter for this system is to reduce the uncertainty in the boron concentration measurement. The filter also provides incipient fault detection by estimating the unmeasured state of any unpoisoned solution, which would dilute the boron solution, entering the feed vessel

  5. Complex Strategic Choices Applying Systemic Planning for Strategic Decision Making

    CERN Document Server

    Leleur, Steen

    2012-01-01

    Effective decision making requires a clear methodology, particularly in a complex world of globalisation. Institutions and companies in all disciplines and sectors are faced with increasingly multi-faceted areas of uncertainty which cannot always be effectively handled by traditional strategies. Complex Strategic Choices provides clear principles and methods which can guide and support strategic decision making to face the many current challenges. By considering ways in which planning practices can be renewed and exploring the possibilities for acquiring awareness and tools to add value to strategic decision making, Complex Strategic Choices presents a methodology which is further illustrated by a number of case studies and example applications. Dr. Techn. Steen Leleur has adapted previously established research based on feedback and input from various conferences, journals and students resulting in new material stemming from and focusing on practical application of a systemic approach. The outcome is a coher...

  6. Work flow management systems applied in nuclear power plants management system to a new computer platform

    International Nuclear Information System (INIS)

    Rodriguez Lorite, M.; Martin Lopez-Suevos, C.

    1996-01-01

    Activities performed in most companies are based on the flow of information between their different departments and personnel. Most of this information is on paper (delivery notes, invoices, reports, etc). The percentage of information transmitted electronically (electronic transactions, spread sheets, files from word processors, etc) is usually low. The implementation of systems to control and speed up this work flow is the aim of work flow management systems. This article presents a prototype for applying work flow management systems to a specific area: the basic life cycle of a purchase order in a nuclear power plant, which requires the involvement of various computer applications: purchase order management, warehouse management, accounting, etc. Once implemented, work flow management systems allow optimisation of the execution of different tasks included in the managed life cycles and provide parameters to, if necessary, control work cycles, allowing their temporary or definitive modification. (Author)

  7. Academic performance in terms of the applied assessment system

    Directory of Open Access Journals (Sweden)

    Arribas, José María

    2012-05-01

    Full Text Available This paper examines the academic performance depending on the evaluation and rating system used in the university. The sample under study consists of 30 subjects -taught by 35 professors to 2192 students from 7 different degrees at 14 universities of all Spain-. The results confirm that continuous assessment is the one that best results not only in terms of rate of return and success rate but also in terms of grades. En este trabajo se estudia el rendimiento académico en función del sistema de evaluación y calificación empleado en el ámbito universitario. La muestra objeto de estudio está formada por 30 asignaturas -impartidas por 35 profesores a 2192 alumnos de 7 titulaciones diferentes en 14 universidades de toda España-. Los resultados obtenidos confirman que la evaluación continua es la que propicia los mejores resultados no solo en cuanto a la Tasa de Rendimiento y a la Tasa de Éxito, sino también en cuanto a las calificaciones obtenidas.

  8. Dynamical Systems Analysis Applied to Working Memory Data

    Directory of Open Access Journals (Sweden)

    Fidan eGasimova

    2014-07-01

    Full Text Available In the present paper we investigate weekly fluctuations in the working memory capacity (WMC assessed over a period of two years. We use dynamical system analysis, specifically a second order linear differential equation, to model weekly variability in WMC in a sample of 112 9th graders. In our longitudinal data we use a B-spline imputation method to deal with missing data. The results show a significant negative frequency parameter in the data, indicating a cyclical pattern in weekly memory updating performance across time. We use a multilevel modeling approach to capture individual differences in model parameters and find that a higher initial performance level and a slower improvement at the MU task is associated with a slower frequency of oscillation. Additionally, we conduct a simulation study examining the analysis procedure’s performance using different numbers of B-spline knots and values of time delay embedding dimensions. Results show that the number of knots in the B-spline imputation influence accuracy more than the number of embedding dimensions.

  9. GIS Application System Design Applied to Information Monitoring

    Science.gov (United States)

    Qun, Zhou; Yujin, Yuan; Yuena, Kang

    Natural environment information management system involves on-line instrument monitoring, data communications, database establishment, information management software development and so on. Its core lies in collecting effective and reliable environmental information, increasing utilization rate and sharing degree of environment information by advanced information technology, and maximizingly providing timely and scientific foundation for environmental monitoring and management. This thesis adopts C# plug-in application development and uses a set of complete embedded GIS component libraries and tools libraries provided by GIS Engine to finish the core of plug-in GIS application framework, namely, the design and implementation of framework host program and each functional plug-in, as well as the design and implementation of plug-in GIS application framework platform. This thesis adopts the advantages of development technique of dynamic plug-in loading configuration, quickly establishes GIS application by visualized component collaborative modeling and realizes GIS application integration. The developed platform is applicable to any application integration related to GIS application (ESRI platform) and can be as basis development platform of GIS application development.

  10. From academic to applied: Operationalising resilience in river systems

    Science.gov (United States)

    Parsons, Melissa; Thoms, Martin C.

    2018-03-01

    The concept of resilience acknowledges the ability of societies to live and develop with dynamic environments. Given the recognition of the need to prepare for anticipated and unanticipated shocks, applications of resilience are increasing as the guiding principle of public policy and programs in areas such as disaster management, urban planning, natural resource management, and climate change adaptation. River science is an area in which the adoption of resilience is increasing, leading to the proposition that resilience may become a guiding principle of river policy and programs. Debate about the role of resilience in rivers is part of the scientific method, but disciplinary disunity about the ways to approach resilience application in policy and programs may leave river science out of the policy process. We propose six elements that need to be considered in the design and implementation of resilience-based river policy and programs: rivers as social-ecological systems; the science-policy interface; principles, capacities, and characteristics of resilience; cogeneration of knowledge; adaptive management; and the state of the science of resilience.

  11. 30 CFR 260.111 - What conditions apply to the bidding systems that MMS uses?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What conditions apply to the bidding systems that MMS uses? 260.111 Section 260.111 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... What conditions apply to the bidding systems that MMS uses? (a) For each of the bidding systems in...

  12. The Inverse System Method Applied to the Derivation of Power System Non—linear Control Laws

    Institute of Scientific and Technical Information of China (English)

    DonghaiLI; XuezhiJIANG; 等

    1997-01-01

    The differential geometric method has been applied to a series of power system non-linear control problems effectively.However a set of differential equations must be solved for obtaining the required diffeomorphic transformation.Therefore the derivation of control laws is very complicated.In fact because of the specificity of power system models the required diffeomorphic transformation may be obtained directly,so it is unnecessary to solve a set of differential equations.In addition inverse system method is equivalent to differential geometric method in reality and not limited to affine nonlinear systems,Its physical meaning is able to be viewed directly and its deduction needs only algebraic operation and derivation,so control laws can be obtained easily and the application to engineering is very convenient.Authors of this paper take steam valving control of power system as a typical case to be studied.It is demonstrated that the control law deduced by inverse system method is just the same as one by differential geometric method.The conclusion will simplify the control law derivations of steam valving,excitation,converter and static var compensator by differential geometric method and may be suited to similar control problems in other areas.

  13. Conceptual frameworks of the notification, registration and licensing system applied in Cuba

    International Nuclear Information System (INIS)

    Jerez Verqueria, Pablo; Quevedo Garcia, Jose R.; Betancourt Hernadez, Luisa A.

    1996-01-01

    In our country, a safety regulations has been established whose objective is to establish the authorization system to apply and the requirements to fulfill by the license applications. The present work describes how such system has been conceptually conceived

  14. Computing and Systems Applied in Support of Coordinated Energy, Environmental, and Climate Planning

    Science.gov (United States)

    This talk focuses on how Dr. Loughlin is applying Computing and Systems models, tools and methods to more fully understand the linkages among energy systems, environmental quality, and climate change. Dr. Loughlin will highlight recent and ongoing research activities, including: ...

  15. Features of applying systems approach for evaluating the reliability of cryogenic systems for special purposes

    Directory of Open Access Journals (Sweden)

    E. D. Chertov

    2016-01-01

    Full Text Available Summary. The analysis of cryogenic installations confirms objective regularity of increase in amount of the tasks solved by systems of a special purpose. One of the most important directions of development of a cryogenics is creation of installations for air separation product receipt, namely oxygen and nitrogen. Modern aviation complexes require use of these gases in large numbers as in gaseous, and in the liquid state. The onboard gas systems applied in aircraft of the Russian Federation are subdivided on: oxygen system; air (nitric system; system of neutral gas; fire-proof system. Technological schemes ADI are in many respects determined by pressure of compressed air or, in a general sense, a refrigerating cycle. For the majority ADI a working body of a refrigerating cycle the divided air is, that is technological and refrigerating cycles in installation are integrated. By this principle differentiate installations: low pressure; average and high pressure; with detander; with preliminary chilling. There is also insignificant number of the ADI types in which refrigerating and technological cycles are separated. These are installations with external chilling. For the solution of tasks of control of technical condition of the BRV hardware in real time and estimates of indicators of reliability it is offered to use multi-agent technologies. Multi-agent approach is the most acceptable for creation of SPPR for reliability assessment as allows: to redistribute processing of information on elements of system that leads to increase in overall performance; to solve a problem of accumulating, storage and recycling of knowledge that will allow to increase significantly efficiency of the solution of tasks of an assessment of reliability; to considerably reduce intervention of the person in process of functioning of system that will save time of the person of the making decision (PMD and will not demand from it special skills of work with it.

  16. NetCDF based data archiving system applied to ITER Fast Plant System Control prototype

    International Nuclear Information System (INIS)

    Castro, R.; Vega, J.; Ruiz, M.; De Arcas, G.; Barrera, E.; López, J.M.; Sanz, D.; Gonçalves, B.; Santos, B.; Utzel, N.; Makijarvi, P.

    2012-01-01

    Highlights: ► Implementation of a data archiving solution for a Fast Plant System Controller (FPSC) for ITER CODAC. ► Data archiving solution based on scientific NetCDF-4 file format and Lustre storage clustering. ► EPICS control based solution. ► Tests results and detailed analysis of using NetCDF-4 and clustering technologies on fast acquisition data archiving. - Abstract: EURATOM/CIEMAT and Technical University of Madrid (UPM) have been involved in the development of a FPSC (Fast Plant System Control) prototype for ITER, based on PXIe (PCI eXtensions for Instrumentation). One of the main focuses of this project has been data acquisition and all the related issues, including scientific data archiving. Additionally, a new data archiving solution has been developed to demonstrate the obtainable performances and possible bottlenecks of scientific data archiving in Fast Plant System Control. The presented system implements a fault tolerant architecture over a GEthernet network where FPSC data are reliably archived on remote, while remaining accessible to be redistributed, within the duration of a pulse. The storing service is supported by a clustering solution to guaranty scalability, so that FPSC management and configuration may be simplified, and a unique view of all archived data provided. All the involved components have been integrated under EPICS (Experimental Physics and Industrial Control System), implementing in each case the necessary extensions, state machines and configuration process variables. The prototyped solution is based on the NetCDF-4 (Network Common Data Format) file format in order to incorporate important features, such as scientific data models support, huge size files management, platform independent codification, or single-writer/multiple-readers concurrency. In this contribution, a complete description of the above mentioned solution is presented, together with the most relevant results of the tests performed, while focusing in the

  17. Power System Oscillation Modes Identifications: Guidelines for Applying TLS-ESPRIT Method

    Science.gov (United States)

    Gajjar, Gopal R.; Soman, Shreevardhan

    2013-05-01

    Fast measurements of power system quantities available through wide-area measurement systems enables direct observations for power system electromechanical oscillations. But the raw observations data need to be processed to obtain the quantitative measures required to make any inference regarding the power system state. A detailed discussion is presented for the theory behind the general problem of oscillatory mode indentification. This paper presents some results on oscillation mode identification applied to a wide-area frequency measurements system. Guidelines for selection of parametes for obtaining most reliable results from the applied method are provided. Finally, some results on real measurements are presented with our inference on them.

  18. Stability analysis of multi-infeed HVDC system applying VSC-HVDC

    DEFF Research Database (Denmark)

    Liu, Yan; Chen, Zhe

    2010-01-01

    This paper presents a general model of dual infeed HVDC system applying VSC-HVDC, which can be used as an element in large multi infeed HVDC system. The model may have different structure under different grid faults because of the action of breakers. Hence power flow of the system based on this m...

  19. Applied Systemic Theory and Educational Psychology: Can the Twain Ever Meet?

    Science.gov (United States)

    Pellegrini, Dario W.

    2009-01-01

    This article reflects on the potential benefits of applying systemic theory to the work of educational psychologists (EPs). It reviews developments in systemic thinking over time, and discusses the differences between more directive "first order" versus collaborative "second order" approaches. It considers systemic theories and…

  20. Beam diagnostics and data acquisition system for ion beam transport line used in applied research

    International Nuclear Information System (INIS)

    Skuratov, V.A.; Didyk, A.Yu.; Arkhipov, A.V.; Illes, A.; Bodnar, K.; Illes, Z.; Havancsak, K.

    1999-01-01

    Ion beam transport line for applied research on U-400 cyclotron, beam diagnostics and data acquisition system for condensed matter studies are described. The main features of Windows-based real time program are considered

  1. Intelligent Decisional Assistant that Facilitate the Choice of a Proper Computer System Applied in Busines

    OpenAIRE

    Nicolae MARGINEAN

    2009-01-01

    The choice of a proper computer system is not an easy task for a decider. One reason could be the present market development of computer systems applied in business. The big number of the Romanian market players determines a big number of computerized products, with a multitude of various properties. Our proposal tries to optimize and facilitate this decisional process within an e-shop where are sold IT packets applied in business, building an online decisional assistant, a special component ...

  2. Reliability Models Applied to a System of Power Converters in Particle Accelerators

    OpenAIRE

    Siemaszko, D; Speiser, M; Pittet, S

    2012-01-01

    Several reliability models are studied when applied to a power system containing a large number of power converters. A methodology is proposed and illustrated in the case study of a novel linear particle accelerator designed for reaching high energies. The proposed methods result in the prediction of both reliability and availability of the considered system for optimisation purposes.

  3. Applying Data Mining Techniques to Improve Information Security in the Cloud: A Single Cache System Approach

    OpenAIRE

    Amany AlShawi

    2016-01-01

    Presently, the popularity of cloud computing is gradually increasing day by day. The purpose of this research was to enhance the security of the cloud using techniques such as data mining with specific reference to the single cache system. From the findings of the research, it was observed that the security in the cloud could be enhanced with the single cache system. For future purposes, an Apriori algorithm can be applied to the single cache system. This can be applied by all cloud providers...

  4. Unified Modeling of Discrete Event and Control Systems Applied in Manufacturing

    Directory of Open Access Journals (Sweden)

    Amanda Arêas de Souza

    2015-05-01

    Full Text Available For the development of both a simulation modeland a control system, it is necessary to build, inadvance, a conceptual model. This is what isusually suggested by the methodologies applied inprojects of this nature. Some conceptual modelingtechniques allow for a better understanding ofthe simulation model, and a clear descriptionof the logic of control systems. Therefore, thispaper aims to present and evaluate conceptuallanguages for unified modeling of models ofdiscrete event simulation and control systemsapplied in manufacturing. The results show thatthe IDEF-SIM language can be applied both insimulation systems and in process control.

  5. VIABILITY OF SOME APPLIED COST SYSTEMS IN MANUFACTURING FIRMS: EGYPT'S CASE

    Directory of Open Access Journals (Sweden)

    Karim Mamdouh ABBAS

    2015-04-01

    Full Text Available The present study aims to analyze viability of some applied cost systems. The population of the study is some Egyptian manufacturing firms. The number of received questionnaires was 385. The results indicated that , according to the application extent indicator, the currently cost systems in Egyptian manufacturing firms may be descendingly arranged as follows: Activity Based Costing (ABC system, Target Costing (TC system , Resource Consumption Accounting (RCA system, Activity Based Management (ABM ,Other systems, Theory of Constraints (TOC and Value Chain (VC analysis.

  6. Effects of applying three-dimensional seismic isolation system on the seismic design of FBR

    International Nuclear Information System (INIS)

    Hirata, Kazuta; Yabana, Shuichi; Kanazawa, Kenji; Matsuda, Akihiro

    1997-01-01

    In this study conceptional three-dimensional seismic isolation system for fast breeder reactor (FBR) is proposed. Effects of applying three-dimensional seismic isolation system on the seismic design for the FBR equipment are evaluated quantitatively. From the evaluation, it is concluded following effects are expected by applying the three-dimensional seismic isolation system to the FBR and the effects are evaluated quantitatively. (1) Reduction of membrane thickness of the reactor vessel (2) Suppression of uplift of fuels by reducing vertical seismic response of the core (3) Reduction of the supports for the piping system (4) Three-dimensional base isolation system for the whole reactor building is advantageous to the combined isolation system of horizontal base isolation for the reactor building and vertical isolation for the equipment. (author)

  7. GEOGRAPHIC INFORMATION SYSTEMS AND APPLIED ECONOMICS: AN INITIAL DISCUSSION OF POTENTIAL APPLICATIONS AND CONTRIBUTIONS

    OpenAIRE

    Taupier, Richard; Willis, Cleve E.

    1994-01-01

    Geographic Information Systems (GIS) are becoming increasingly important to virtually all of the natural and social sciences. Applied economists will find that GIS can make valuable contributions to many of the problems with which they are concerned. Moreover, a great deal of the science behind GIS technology would benefit from the contributions of applied economists. This paper presents some initial suggestions for the ways in which GIS may be important to economics and the GIS related issue...

  8. Applying the ISO 9126 Model to the Evaluation of an E-learning System in Iran

    OpenAIRE

    Hossein Pedram; Davood Karimzadegan Moghaddam; Zhaleh Asheghi

    2012-01-01

    One of the models presented in e-learning quality system field is ISO 9126 model, which applied in this research to evaluate e-learning system of Amirkabir University. This model system for evaluation, the six main variables provided that each of these variables by several other indicators was measured. Thus, the model parameters as ISO 9126 and turned the questionnaire survey among samples (120 experts and students of Amirkabir University) and the distribution were completed. Based on the re...

  9. Accuracy of the Adomian decomposition method applied to the Lorenz system

    International Nuclear Information System (INIS)

    Hashim, I.; Noorani, M.S.M.; Ahmad, R.; Bakar, S.A.; Ismail, E.S.; Zakaria, A.M.

    2006-01-01

    In this paper, the Adomian decomposition method (ADM) is applied to the famous Lorenz system. The ADM yields an analytical solution in terms of a rapidly convergent infinite power series with easily computable terms. Comparisons between the decomposition solutions and the fourth-order Runge-Kutta (RK4) numerical solutions are made for various time steps. In particular we look at the accuracy of the ADM as the Lorenz system changes from a non-chaotic system to a chaotic one

  10. Performance estimation of Tesla turbine applied in small scale Organic Rankine Cycle (ORC) system

    International Nuclear Information System (INIS)

    Song, Jian; Gu, Chun-wei; Li, Xue-song

    2017-01-01

    Highlights: • One-dimensional model of the Tesla turbine is improved and applied in ORC system. • Working fluid properties and system operating conditions impact efficiency. • The influence of turbine efficiency on ORC system performance is evaluated. • Potential of using Tesla turbine in ORC systems is estimated. - Abstract: Organic Rankine Cycle (ORC) system has been proven to be an effective method for the low grade energy utilization. In small scale applications, the Tesla turbine offers an attractive option for the organic expander if an efficient design can be achieved. The Tesla turbine is simple in structure and is easy to be manufactured. This paper improves the one-dimensional model for the Tesla turbine, which adopts a non-dimensional formulation that identifies the dimensionless parameters that dictates the performance features of the turbine. The model is used to predict the efficiency of a Tesla turbine that is applied in a small scale ORC system. The influence of the working fluid properties and the operating conditions on the turbine performance is evaluated. Thermodynamic analysis of the ORC system with different organic working fluids and under various operating conditions is conducted. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, the Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

  11. Intelligent Decisional Assistant that Facilitate the Choice of a Proper Computer System Applied in Busines

    Directory of Open Access Journals (Sweden)

    Nicolae MARGINEAN

    2009-01-01

    Full Text Available The choice of a proper computer system is not an easy task for a decider. One reason could be the present market development of computer systems applied in business. The big number of the Romanian market players determines a big number of computerized products, with a multitude of various properties. Our proposal tries to optimize and facilitate this decisional process within an e-shop where are sold IT packets applied in business, building an online decisional assistant, a special component conceived to facilitate the decision making needed for the selection of the pertinent IT package that fits the requirements of one certain business, described by the decider. The user interacts with the system as an online buyer that visit an e-shop where are sold IT package applied in economy.

  12. ASPECTS OF OBSTACLES FOR APPLYING ACTIVITY BASED COSTING (ABC SYSTEM IN EGYPTIAN FIRMS

    Directory of Open Access Journals (Sweden)

    Petru STEFEA

    2013-10-01

    Full Text Available The following investigation aims to determine the aspects of obstacles for applying Activity Based Costing (ABC system in the Egyptian case and the significant differences among the effects of such obstacles . The Study used the survey method to describe and analyze the obstacles in some Egyptian firms. The population of the study is Egyptian manufacturing firms. This survey used the number of 392 questionnaires that were used throughout the total of 23 Egyptian manufacturing firms, during the first half of 2013. Finally, the study found some influencing obstacles for applying this system (ABC and there were significant differences among the aspects of obstacles for applying ABC system in the Egyptian manufacturing firms.

  13. Applying reliability analysis to design electric power systems for More-electric aircraft

    Science.gov (United States)

    Zhang, Baozhu

    The More-Electric Aircraft (MEA) is a type of aircraft that replaces conventional hydraulic and pneumatic systems with electrically powered components. These changes have significantly challenged the aircraft electric power system design. This thesis investigates how reliability analysis can be applied to automatically generate system topologies for the MEA electric power system. We first use a traditional method of reliability block diagrams to analyze the reliability level on different system topologies. We next propose a new methodology in which system topologies, constrained by a set reliability level, are automatically generated. The path-set method is used for analysis. Finally, we interface these sets of system topologies with control synthesis tools to automatically create correct-by-construction control logic for the electric power system.

  14. Identifying a cooperative control mechanism between an applied field and the environment of open quantum systems

    Science.gov (United States)

    Gao, Fang; Rey-de-Castro, Roberto; Wang, Yaoxiong; Rabitz, Herschel; Shuang, Feng

    2016-05-01

    Many systems under control with an applied field also interact with the surrounding environment. Understanding the control mechanisms has remained a challenge, especially the role played by the interaction between the field and the environment. In order to address this need, here we expand the scope of the Hamiltonian-encoding and observable-decoding (HE-OD) technique. HE-OD was originally introduced as a theoretical and experimental tool for revealing the mechanism induced by control fields in closed quantum systems. The results of open-system HE-OD analysis presented here provide quantitative mechanistic insights into the roles played by a Markovian environment. Two model open quantum systems are considered for illustration. In these systems, transitions are induced by either an applied field linked to a dipole operator or Lindblad operators coupled to the system. For modest control yields, the HE-OD results clearly show distinct cooperation between the dynamics induced by the optimal field and the environment. Although the HE-OD methodology introduced here is considered in simulations, it has an analogous direct experimental formulation, which we suggest may be applied to open systems in the laboratory to reveal mechanistic insights.

  15. Applied Nuclear Accountability Systems: A Case Study in the System Architecture and Development of NuMAC

    International Nuclear Information System (INIS)

    Campbell, Andrea Beth

    2004-01-01

    This is a case study of the NuMAC nuclear accountability system developed at a private fuel fabrication facility. This paper investigates nuclear material accountability and safeguards by researching expert knowledge applied in the system design and development. Presented is a system developed to detect and deter the theft of weapons grade nuclear material. Examined is the system architecture that includes: issues for the design and development of the system; stakeholder issues; how the system was built and evolved; software design, database design, and development tool considerations; security and computing ethics. (author)

  16. Aerobic granular SBR systems applied to the treatment of industrial effluents

    International Nuclear Information System (INIS)

    Rio, V. del; Figueroa, M.; Arrojo, B.; Mosquera-Corral, A.; Campos, J. L.; Garcia-Torriello, G.; Mendez, R.

    2009-01-01

    Systems based on aerobic granular biomass are an alternative to the conventional activated sludge plants for wastewater treatment. Large organic and nitrogen loads are treated in these systems where biomass grown as granules, easy to separate by setting, make unnecessary the construction of secondary settler reducing the surface requirements for the treatment system construction. Furthermore, in aerobic granular reactors simultaneously carbon and nitrogen removal is feasible. These systems have been already applied at laboratory scale for the treatment of different types of industrial and urban wastewater. (Author)

  17. Aerobic granular SBR systems applied to the treatment of industrial effluents

    Energy Technology Data Exchange (ETDEWEB)

    Rio, V. del; Figueroa, M.; Arrojo, B.; Mosquera-Corral, A.; Campos, J. L.; Garcia-Torriello, G.; Mendez, R.

    2009-07-01

    Systems based on aerobic granular biomass are an alternative to the conventional activated sludge plants for wastewater treatment. Large organic and nitrogen loads are treated in these systems where biomass grown as granules, easy to separate by setting, make unnecessary the construction of secondary settler reducing the surface requirements for the treatment system construction. Furthermore, in aerobic granular reactors simultaneously carbon and nitrogen removal is feasible. These systems have been already applied at laboratory scale for the treatment of different types of industrial and urban wastewater. (Author)

  18. Applying Data Mining Techniques to Improve Information Security in the Cloud: A Single Cache System Approach

    Directory of Open Access Journals (Sweden)

    Amany AlShawi

    2016-01-01

    Full Text Available Presently, the popularity of cloud computing is gradually increasing day by day. The purpose of this research was to enhance the security of the cloud using techniques such as data mining with specific reference to the single cache system. From the findings of the research, it was observed that the security in the cloud could be enhanced with the single cache system. For future purposes, an Apriori algorithm can be applied to the single cache system. This can be applied by all cloud providers, vendors, data distributors, and others. Further, data objects entered into the single cache system can be extended into 12 components. Database and SPSS modelers can be used to implement the same.

  19. 26th International Conference on Industrial, Engineering & Other Applications of Applied Intelligent Systems (IEA/AIE)

    CERN Document Server

    Bosse, Tibor; Hindriks, Koen; Hoogendoorn, Mark; Jonker, Catholijn; Treur, Jan; Contemporary Challenges and Solutions in Applied Artificial Intelligence

    2013-01-01

      Since its origination in the mid-twentieth century, the area of Artificial Intelligence (AI) has undergone a number of developments. While the early interest in AI was mainly triggered by the desire to develop artifacts that show the same intelligent behavior as humans, nowadays scientists have realized that research in AI involves a multitude of separate challenges, besides the traditional goal to replicate human intelligence. In particular, recent history has pointed out that a variety of ‘intelligent’ computational techniques, part of which are inspired by human intelligence, may be successfully applied to solve all kinds of practical problems. This sub-area of AI, which has its main emphasis on applications of intelligent systems to solve real-life problems, is currently known under the term Applied Intelligence.   The objective of the International Conference on Industrial, Engineering & Other Applications of Applied Intelligent Systems (IEA/AIE) is to promote and disseminate recent research ...

  20. A generic organ based ontology system, applied to vertebrate heart anatomy, development and physiology

    Directory of Open Access Journals (Sweden)

    Bertens Laura M.F.

    2011-03-01

    Full Text Available We present a novel approach to modelling biological information using ontologies. The system interlinks three ontologies, comprising anatomical, developmental and taxonomical information, and includes instances of structures for different species. The framework is constructed for comparative analyses in the field of evolutionary development. We have applied the approach to the vertebrate heart and present four case studies of the functionality of the system, focusing on cross-species comparisons, developmental studies, physiological studies and 3D visualisation.

  1. Principles underlying a guideline for applying HAZOP to programmable electronic systems

    International Nuclear Information System (INIS)

    Redmill, F.; Chudleigh, M.F.; Catmur, J.R.

    1997-01-01

    This paper reports on the experience of the authors, both in applying Hazard and Operability Studies (HAZOP) to programmable electronic systems (PES) and in researching the subject. A survey during the preparation of a guideline on the application of HAZOP to PES revealed common difficulties in this application. HAZOP is introduced, the difficulties are explained, and means of overcoming them are described

  2. Toward a Blended Ontology: Applying Knowledge Systems to Compare Therapeutic and Toxicological Nanoscale Domains

    Science.gov (United States)

    Bionanomedicine and environmental research share need common terms and ontologies. This study applied knowledge systems, data mining, and bibliometrics used in nano-scale ADME research from 1991 to 2011. The prominence of nano-ADME in environmental research began to exceed the pu...

  3. An Investigation of Employees' Use of E-Learning Systems: Applying the Technology Acceptance Model

    Science.gov (United States)

    Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Chen, Yen-Hsun

    2013-01-01

    The purpose of this study is to apply the technology acceptance model to examine the employees' attitudes and acceptance of electronic learning (e-learning) systems in organisations. This study examines four factors (organisational support, computer self-efficacy, prior experience and task equivocality) that are believed to influence employees'…

  4. Plug and Play Process Control Applied to a District Heating System

    DEFF Research Database (Denmark)

    Knudsen, Torben; Trangbæk, Klaus; Kallesøe, Carsten Skovmose

    2008-01-01

    The general ideas within plug and play process control (PTC) are to initialize and reconfigure control systems just by plug and play. In this paper these ideas are applied to a district heating pressure control problem. First of all this serves as a concrete example of PTC, secondly some of the f...

  5. Embracing Connectedness and Change: A Complex Dynamic Systems Perspective for Applied Linguistic Research

    Science.gov (United States)

    Cameron, Lynne

    2015-01-01

    Complex dynamic systems (CDS) theory offers a powerful metaphorical model of applied linguistic processes, allowing holistic descriptions of situated phenomena, and addressing the connectedness and change that often characterise issues in our field. A recent study of Kenyan conflict transformation illustrates application of a CDS perspective. Key…

  6. Shape memory alloys applied to improve rotor-bearing system dynamics - an experimental investigation

    DEFF Research Database (Denmark)

    Enemark, Søren; Santos, Ilmar; Savi, Marcelo A.

    2015-01-01

    passing through critical speeds. In this work, the feasibility of applying shape memory alloys to a rotating system is experimentally investigated. Shape memory alloys can change their stiffness with temperature variations and thus they may change system dynamics. Shape memory alloys also exhibit...... perturbations and mass imbalance responses of the rotor-bearing system at different temperatures and excitation frequencies are carried out to determine the dynamic behaviour of the system. The behaviour and the performance in terms of vibration reduction and system adaptability are compared against a benchmark...... configuration comprised by the same system having steel springs instead of shape memory alloy springs. The experimental results clearly show that the stiffness changes and hysteretic behaviour of the shape memory alloys springs alter system dynamics both in terms of critical speeds and mode shapes. Vibration...

  7. Robust algorithms and system theory applied to the reconstruction of primary and secondary vertices

    International Nuclear Information System (INIS)

    Fruehwirth, R.; Liko, D.; Mitaroff, W.; Regler, M.

    1990-01-01

    Filter techniques from system theory have recently been applied to the estimation of track and vertex parameters. In this paper, vertex fitting by the Kalman filter method is discussed. These techniques have been applied to the identification of short-lived decay vertices in the case of high multiplicities as expected at LEP (Monte Carlo data in the DELPHI detector). Then in this context the need of further rebustification of the Kalman filter method is discussed. Finally results of an application with real data at a heavy ion experiment (NA36) will be presented. Here the vertex fit is used to select the interaction point among possible targets

  8. Uncharted territory: A complex systems approach as an emerging paradigm in applied linguistics

    Directory of Open Access Journals (Sweden)

    Weideman, Albert J

    2009-12-01

    Full Text Available Developing a theory of applied linguistics is a top priority for the discipline today. The emergence of a new paradigm - a complex systems approach - in applied linguistics presents us with a unique opportunity to give prominence to the development of a foundational framework for this design discipline. Far from being a mere philosophical exercise, such a framework will find application in the training and induction of new entrants into the discipline within the developing context of South Africa, as well as internationally.

  9. Computer aided instrumented Charpy test applied dynamic fracture toughness evaluation system

    International Nuclear Information System (INIS)

    Kobayashi, Toshiro; Niinomi, Mitsuo

    1986-01-01

    Micro computer aided data treatment system and personal computer aided data analysis system were applied to the traditional instrumented Charpy impact test system. The analysis of Charpy absorbed energy (E i , E p , E t ) and load (P y , P m ), and the evaluation of dynamic toughness through whole fracture process, i.e. J Id , J R curve and T mat was examined using newly developed computer aided instrumented Charpy impact test system. E i , E p , E t , P y and P m were effectively analyzed using moving average method and printed out automatically by micro computer aided data treatment system. J Id , J R curve and T mat could be measured by stop block test method. Then, J Id , J R curve and T mat were effectively estimated using compliance changing rate method and key curve method on the load-load point displacement curve of single fatigue cracked specimen by personal computer aided data analysis system. (author)

  10. Embracing uncertainty, managing complexity: applying complexity thinking principles to transformation efforts in healthcare systems.

    Science.gov (United States)

    Khan, Sobia; Vandermorris, Ashley; Shepherd, John; Begun, James W; Lanham, Holly Jordan; Uhl-Bien, Mary; Berta, Whitney

    2018-03-21

    Complexity thinking is increasingly being embraced in healthcare, which is often described as a complex adaptive system (CAS). Applying CAS to healthcare as an explanatory model for understanding the nature of the system, and to stimulate changes and transformations within the system, is valuable. A seminar series on systems and complexity thinking hosted at the University of Toronto in 2016 offered a number of insights on applications of CAS perspectives to healthcare that we explore here. We synthesized topics from this series into a set of six insights on how complexity thinking fosters a deeper understanding of accepted ideas in healthcare, applications of CAS to actors within the system, and paradoxes in applications of complexity thinking that may require further debate: 1) a complexity lens helps us better understand the nebulous term "context"; 2) concepts of CAS may be applied differently when actors are cognizant of the system in which they operate; 3) actor responses to uncertainty within a CAS is a mechanism for emergent and intentional adaptation; 4) acknowledging complexity supports patient-centred intersectional approaches to patient care; 5) complexity perspectives can support ways that leaders manage change (and transformation) in healthcare; and 6) complexity demands different ways of implementing ideas and assessing the system. To enhance our exploration of key insights, we augmented the knowledge gleaned from the series with key articles on complexity in the literature. Ultimately, complexity thinking acknowledges the "messiness" that we seek to control in healthcare and encourages us to embrace it. This means seeing challenges as opportunities for adaptation, stimulating innovative solutions to ensure positive adaptation, leveraging the social system to enable ideas to emerge and spread across the system, and even more important, acknowledging that these adaptive actions are part of system behaviour just as much as periods of stability are. By

  11. A Pilot Study on Applying Risk Informed Application Option 2 to Six Systems in UCN 3

    International Nuclear Information System (INIS)

    Kim, Kil-Yoo; Yang, Joon-Eon; Lee, Young-Joo; Chung, Hye-Won

    2007-01-01

    To reduce the unnecessary burden of a regulation, NRC prepared three options for the risk informed regulatory framework known as Option 1, Option 2 and Option 3. In Option 2, all safety related Structure, System and Components (SSCs) and non-safety related SSCs are evaluated from a safety point of view, and the low safety significant SSCs belonging to the safety related group are called 'Risk Informed Safety Class (RISC) - 3' SSCs. The 'RISC-3' SSCs can be exempted from the special treatment requirements such as a seismic and environmental requirement, of 10 CFR 50. Two years ago, a paper was published which described the Option 2 method applied to the high pressure safety injection system (HPSI) and the essential service water system (ESW) of UCN 3. However, this paper describes the results when Option 2 is applied to the other 4 systems such as a low pressure safety injection system(LPSI), safety depressurization system(SDS), instrument air system(IAS), safety injection tank(SIT). First of all, this paper includes the results from the importance analysis in view of a Fire PSA and Level 2 PSA

  12. Galvanic Liquid Applied Coating System for Protection of Embedded Steel Surfaces from Corrosion

    Science.gov (United States)

    Curran, Joseph; MacDowell, Louis; Voska, N. (Technical Monitor)

    2002-01-01

    The corrosion of reinforcing steel in concrete is an insidious problem for the Kennedy Space Center, government agencies, and the general public. Existing corrosion protection systems on the market are costly, complex, and time-consuming to install, require continuous maintenance and monitoring, and require specialized skills for installation. NASA's galvanic liquid-applied coating offers companies the ability to conveniently protect embedded steel rebar surfaces from corrosion. Liquid-applied inorganic galvanic coating contains one ore more of the following metallic particles: magnesium, zinc, or indium and may contain moisture attracting compounds that facilitate the protection process. The coating is applied to the outer surface of reinforced concrete so that electrical current is established between metallic particles and surfaces of embedded steel rebar; and electric (ionic) current is responsible for providing the necessary cathodic protection for embedded rebar surfaces.

  13. [Digital learning object for diagnostic reasoning in nursing applied to the integumentary system].

    Science.gov (United States)

    da Costa, Cecília Passos Vaz; Luz, Maria Helena Barros Araújo

    2015-12-01

    To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

  14. Digital learning object for diagnostic reasoning in nursing applied to the integumentary system

    Directory of Open Access Journals (Sweden)

    Cecília Passos Vaz da Costa

    Full Text Available Objective: To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. Method: A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. Results: The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. Conclusion: This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

  15. Prognostic Enhancements to Diagnostic Systems (PEDS) Applied to Shipboard Power Generation Systems

    National Research Council Canada - National Science Library

    Byington, Carl S; Roemer, Michael J; Watson, Matthew J

    2004-01-01

    .... The current paper describes a framework and development process that allows more plug n play integration of new diagnostic and prognostic technologies using evolving Open System Architecture (OSA) standards...

  16. Systems Theoretic Process Analysis Applied to an Offshore Supply Vessel Dynamic Positioning System

    Science.gov (United States)

    2016-06-01

    human operators of the system and software components, addressing both in a meaningful way and placing as much or more importance on their behavior ...excessive workload, normalization of deviance , etc. c) The OSV Crew follows the correct procedures but equipment failure results in the DP system (auto...This could be a result of excessive workload, normalization of deviance , etc. c) The OSV Crew follows the correct procedures but equipment failure

  17. System Sensitivity Analysis Applied to the Conceptual Design of a Dual-Fuel Rocket SSTO

    Science.gov (United States)

    Olds, John R.

    1994-01-01

    This paper reports the results of initial efforts to apply the System Sensitivity Analysis (SSA) optimization method to the conceptual design of a single-stage-to-orbit (SSTO) launch vehicle. SSA is an efficient, calculus-based MDO technique for generating sensitivity derivatives in a highly multidisciplinary design environment. The method has been successfully applied to conceptual aircraft design and has been proven to have advantages over traditional direct optimization methods. The method is applied to the optimization of an advanced, piloted SSTO design similar to vehicles currently being analyzed by NASA as possible replacements for the Space Shuttle. Powered by a derivative of the Russian RD-701 rocket engine, the vehicle employs a combination of hydrocarbon, hydrogen, and oxygen propellants. Three primary disciplines are included in the design - propulsion, performance, and weights & sizing. A complete, converged vehicle analysis depends on the use of three standalone conceptual analysis computer codes. Efforts to minimize vehicle dry (empty) weight are reported in this paper. The problem consists of six system-level design variables and one system-level constraint. Using SSA in a 'manual' fashion to generate gradient information, six system-level iterations were performed from each of two different starting points. The results showed a good pattern of convergence for both starting points. A discussion of the advantages and disadvantages of the method, possible areas of improvement, and future work is included.

  18. Solving large scale unit dilemma in electricity system by applying commutative law

    Science.gov (United States)

    Legino, Supriadi; Arianto, Rakhmat

    2018-03-01

    The conventional system, pooling resources with large centralized power plant interconnected as a network. provides a lot of advantages compare to the isolated one include optimizing efficiency and reliability. However, such a large plant need a huge capital. In addition, more problems emerged to hinder the construction of big power plant as well as its associated transmission lines. By applying commutative law of math, ab = ba, for all a,b €-R, the problem associated with conventional system as depicted above, can be reduced. The idea of having small unit but many power plants, namely “Listrik Kerakyatan,” abbreviated as LK provides both social and environmental benefit that could be capitalized by using proper assumption. This study compares the cost and benefit of LK to those of conventional system, using simulation method to prove that LK offers alternative solution to answer many problems associated with the large system. Commutative Law of Algebra can be used as a simple mathematical model to analyze whether the LK system as an eco-friendly distributed generation can be applied to solve various problems associated with a large scale conventional system. The result of simulation shows that LK provides more value if its plants operate in less than 11 hours as peaker power plant or load follower power plant to improve load curve balance of the power system. The result of simulation indicates that the investment cost of LK plant should be optimized in order to minimize the plant investment cost. This study indicates that the benefit of economies of scale principle does not always apply to every condition, particularly if the portion of intangible cost and benefit is relatively high.

  19. Sizing through simulation of systems for photovoltaic solar energy applied to rural electrification

    International Nuclear Information System (INIS)

    Rodríguez‐Borges, Ciaddy Gina; Sarmiento‐Sera, Antonio

    2011-01-01

    The present work is based on the sizing method by means of simulation of the photovoltaic systems energy behavior, applied to rural electrification in regions far from the electric net. The denomination of infra/over sized systems is made and a requested analysis of one particular case is exposed, where it is considered two energy options of different qualities of electric service and the economic valuation of each option is requested, with its corresponding argument. The quality level is established with the fault index in the electricity service for energy lack in the batteries, besides the quantity of energy autonomy days of the system. As conclusions, in infra-sizing conditions systems, and with established quality level of service, multiple sizing solutions exist, and under certain conditions, not always the systems with more quality level, are those of more cost, as well as the presence of a minimum cost in the sizing can be obtained by simulation methods. (author)

  20. An evaluation of an operating BWR piping system damping during earthquake by applying auto regressive analysis

    International Nuclear Information System (INIS)

    Kitada, Y.; Makiguchi, M.; Komori, A.; Ichiki, T.

    1985-01-01

    The records of three earthquakes which had induced significant earthquake response to the piping system were obtained with the earthquake observation system. In the present paper, first, the eigenvalue analysis results for the natural piping system based on the piping support (boundary) conditions are described and second, the frequency and the damping factor evaluation results for each vibrational mode are described. In the present study, the Auto Regressive (AR) analysis method is used in the evaluation of natural frequencies and damping factors. The AR analysis applied here has a capability of direct evaluation of natural frequencies and damping factors from earthquake records observed on a piping system without any information on the input motions to the system. (orig./HP)

  1. Model predictive control based on reduced order models applied to belt conveyor system.

    Science.gov (United States)

    Chen, Wei; Li, Xin

    2016-11-01

    In the paper, a model predictive controller based on reduced order model is proposed to control belt conveyor system, which is an electro-mechanics complex system with long visco-elastic body. Firstly, in order to design low-degree controller, the balanced truncation method is used for belt conveyor model reduction. Secondly, MPC algorithm based on reduced order model for belt conveyor system is presented. Because of the error bound between the full-order model and reduced order model, two Kalman state estimators are applied in the control scheme to achieve better system performance. Finally, the simulation experiments are shown that balanced truncation method can significantly reduce the model order with high-accuracy and model predictive control based on reduced-model performs well in controlling the belt conveyor system. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  2. Software engineering techniques applied to agricultural systems an object-oriented and UML approach

    CERN Document Server

    Papajorgji, Petraq J

    2014-01-01

    Software Engineering Techniques Applied to Agricultural Systems presents cutting-edge software engineering techniques for designing and implementing better agricultural software systems based on the object-oriented paradigm and the Unified Modeling Language (UML). The focus is on the presentation of  rigorous step-by-step approaches for modeling flexible agricultural and environmental systems, starting with a conceptual diagram representing elements of the system and their relationships. Furthermore, diagrams such as sequential and collaboration diagrams are used to explain the dynamic and static aspects of the software system.    This second edition includes: a new chapter on Object Constraint Language (OCL), a new section dedicated to the Model-VIEW-Controller (MVC) design pattern, new chapters presenting details of two MDA-based tools – the Virtual Enterprise and Olivia Nova, and a new chapter with exercises on conceptual modeling.  It may be highly useful to undergraduate and graduate students as t...

  3. Applying different quality and safety models in healthcare improvement work: Boundary objects and system thinking

    International Nuclear Information System (INIS)

    Wiig, Siri; Robert, Glenn; Anderson, Janet E.; Pietikainen, Elina; Reiman, Teemu; Macchi, Luigi; Aase, Karina

    2014-01-01

    A number of theoretical models can be applied to help guide quality improvement and patient safety interventions in hospitals. However there are often significant differences between such models and, therefore, their potential contribution when applied in diverse contexts. The aim of this paper is to explore how two such models have been applied by hospitals to improve quality and safety. We describe and compare the models: (1) The Organizing for Quality (OQ) model, and (2) the Design for Integrated Safety Culture (DISC) model. We analyze the theoretical foundations of the models, and show, by using a retrospective comparative case study approach from two European hospitals, how these models have been applied to improve quality and safety. The analysis shows that differences appear in the theoretical foundations, practical approaches and applications of the models. Nevertheless, the case studies indicate that the choice between the OQ and DISC models is of less importance for guiding the practice of quality and safety improvement work, as they are both systemic and share some important characteristics. The main contribution of the models lay in their role as boundary objects directing attention towards organizational and systems thinking, culture, and collaboration

  4. WiFi Data Acquisition System Applied to a Photovoltaic Powered Water Pumping Plant

    Directory of Open Access Journals (Sweden)

    Sandro César Silveira JUCÁ

    2015-02-01

    Full Text Available The present paper describes how to design and assemble a low cost online monitoring and WiFi data acquisition system using free software applied to microgeneration based on renewable energy sources. The development of online monitoring systems for microgeneration plants based on renewable energy sources is becoming more important, considering that monitoring and data acquisition systems are applicable in stages of the microgeneration process. The monitoring and data acquisition WiFi system was developed using an embedded WiFi modem (Wifly coupled to a microcontrolled board based on the free tool SanUSB. This monitoring system was applied to a photovoltaic (PV water pumping plant without batteries, so as the control system and the wireless communication with the online server, which is also autonomous and powered by PV panel. The free software for online monitoring and WiFi data acquisition allows the analysis of stored data and charts through mobile devices as notebooks, tablets and smartphones.

  5. Applying systems engineering in the civil engineering industry : an analysis of systems engineering projects of a Dutch water board

    NARCIS (Netherlands)

    de Graaf, R. S. (Robin); Vromen, R. M.(Rick); Boes, J. (Hans)

    2017-01-01

    The past decade, practice and literature have shown an increasing interest in Systems Engineering (SE) in the civil engineering industry. The aim of this study is to analyse to what extent SE is applied in six civil engineering SE projects of a Dutch water board. The projects were analysed using a

  6. Applying the Toyota Production System: using a patient safety alert system to reduce error.

    Science.gov (United States)

    Furman, Cathie; Caplan, Robert

    2007-07-01

    In 2002, Virginia Mason Medical Center (VMMC) adapted the Toyota Production System, also known as lean manufacturing. To translate the techniques of zero defects and stopping the line into health care, the Patient Safety Alert (PSA) system requires any employee who encounters a situation that is likely to harm a patient to make an immediate report and to cease any activity that could cause further harm (stopping the line). IMPLEMENTING THE PSA SYSTEM--STOPPING THE LINE: If any VMMC employee's practice or conduct is deemed capable of causing harm to a patient, a PSA can cause that person to be stopped from working until the problem is resolved. A policy statement, senior executive commitment, dedicated resources, a 24-hour hotline, and communication were all key features of implementation. As of December 2006, 6,112 PSA reports were received: 20% from managers, 8% from physicians, 44% from nurses, and 23% from nonclinical support personnel, for example. The number of reports received per month increased from an average of 3 in 2002 to 285 in 2006. Most reports were processed within 24 hours and were resolved within 2 to 3 weeks. Implementing the PSA system has drastically increased the number of safety concerns that are resolved at VMMC, while drastically reducing the time it takes to resolve them. Transparent discussion and feedback have helped promote staff acceptance and participation.

  7. 2nd International Doctoral Symposium on Applied Computation and Security Systems

    CERN Document Server

    Cortesi, Agostino; Saeed, Khalid; Chaki, Nabendu

    2016-01-01

    The book contains the extended version of the works that have been presented and discussed in the Second International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2015) held during May 23-25, 2015 in Kolkata, India. The symposium has been jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy and University of Calcutta, India. The book is divided into volumes and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering.

  8. Noise-spectroscopy of multiqubit systems: Determining all their parameters by applying an external classical noise

    Energy Technology Data Exchange (ETDEWEB)

    Savel' ev, S., E-mail: S.Saveliev@lboro.ac.uk [Department of Physics, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Advanced Science Institute, RIKEN, Wako-shi, Saitama 351-0198 (Japan); Zagoskin, A.M. [Department of Physics, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Advanced Science Institute, RIKEN, Wako-shi, Saitama 351-0198 (Japan); Omelyanchouk, A.N. [Advanced Science Institute, RIKEN, Wako-shi, Saitama 351-0198 (Japan); B. Verkin Institute for Low Temperature Physics and Engineering, 61103 Kharkov (Ukraine); Nori, Franco [Advanced Science Institute, RIKEN, Wako-shi, Saitama 351-0198 (Japan); Physics Department, University of Michigan, Ann Arbor, MI 48109-1040 (United States)

    2010-10-05

    Imagine that you have several sets of two coupled qubits, but you do not know the parameters of their Hamitonians. How to determine these without resorting to the usual spectroscopy approach to the problem? Based on numerical modeling, we show that all the parameters of a system of two coupled qubits can be determined by applying to it an external classical noise and analyzing the Fourier spectrum of the elements of the system's density matrix. In particular, the interlevel spacings as well as the strength and sign of the qubit-qubit coupling can be determined this way.

  9. CRM Failure to Apply Optimal Management Information Systems: Case of Lebanese Financial Sector

    Directory of Open Access Journals (Sweden)

    Charbel Salloum

    2013-12-01

    Full Text Available Financial markets in Lebanon are constrained by government influence, Islamic financial principles, and some barriers to foreign participation. Productivity in the Lebanese financial sector ranks below its occidental counterpart in spite the fact that regulatory, supervisory, and accounting standards are generally consistent with international norms. This paper aims to give the reasons and recommendations of the failure of applying the optimal management information system in the Lebanese Financial Sector. Our results show that the reasons include among others the systems by it selves, their functionalities, but also, companies’ strategy and human capital issues.

  10. A contribution to thermoluminescence dosemeter system optimisation applied to environmental monitoring around nuclear power plants

    International Nuclear Information System (INIS)

    Dies, X.; Ortega, X.; Rosell, J.

    1990-01-01

    The factors that constitute a thermoluminescence dosimetric system have been studied and optimised, with the intention of defining strategies for improving precision and accuracy of TL dosimetry systems for environmental monitoring. An optimisation technique based on fractional factorial designs permitted a reduction in the number of necessary experiments and clarified interactions between various factors. The model for fading over time showed that TL response in LiF:Mg,Ti dosemeters was independent of time between irradiation and readout, and this was applied to fading corrections in nuclear power plant environmental monitoring. (author)

  11. Machine Learning Method Applied in Readout System of Superheated Droplet Detector

    Science.gov (United States)

    Liu, Yi; Sullivan, Clair Julia; d'Errico, Francesco

    2017-07-01

    Direct readability is one advantage of superheated droplet detectors in neutron dosimetry. Utilizing such a distinct characteristic, an imaging readout system analyzes image of the detector for neutron dose readout. To improve the accuracy and precision of algorithms in the imaging readout system, machine learning algorithms were developed. Deep learning neural network and support vector machine algorithms are applied and compared with generally used Hough transform and curvature analysis methods. The machine learning methods showed a much higher accuracy and better precision in recognizing circular gas bubbles.

  12. External injection systems applied in modern cyclotrons designed and manufactured in NIIEFA

    International Nuclear Information System (INIS)

    Bogdanov, P.V.; Vasilchenko, I.N.; Veresov, O.L.; Gavrish, Yu.N.; Grigorenko, S.V.; Zuev, Yu.V.; Kozienko, M.T.; Mudrolyubov, V.G.; Strokach, A.P.; Tsygankov, S.S.

    2012-01-01

    The main parameters and design features of the external injection systems applied in modern cyclotrons designed and manufactured in NIIEFA and intended for production of radionuclides for medicine are presented. The use of these external injection systems instead of a traditional internal source allows the current of the accelerated beam to be significantly increased and the in-leakage of the working gas to the acceleration chamber to be reduced, which results in reduced beam losses in the process of acceleration and lower equipment activation.

  13. PRO-ELICERE: A Hazard Analysis Automation Process Applied to Space Systems

    Directory of Open Access Journals (Sweden)

    Tharcius Augusto Pivetta

    2016-07-01

    Full Text Available In the last decades, critical systems have increasingly been developed using computers and software even in space area, where the project approach is usually very conservative. In the projects of rockets, satellites and its facilities, like ground support systems, simulators, among other critical operations for the space mission, it must be applied a hazard analysis. The ELICERE process was created to perform a hazard analysis mainly over computer critical systems, in order to define or evaluate its safety and dependability requirements, strongly based on Hazards and Operability Study and Failure Mode and Effect Analysis techniques. It aims to improve the project design or understand the potential hazards of existing systems improving their functions related to functional or non-functional requirements. Then, the main goal of the ELICERE process is to ensure the safety and dependability goals of a space mission. The process, at the beginning, was created to operate manually in a gradual way. Nowadays, a software tool called PRO-ELICERE was developed, in such a way to facilitate the analysis process and store the results for reuse in another system analysis. To understand how ELICERE works and its tool, a small example of space study case was applied, based on a hypothetical rocket of the Cruzeiro do Sul family, developed by the Instituto de Aeronáutica e Espaço in Brazil.

  14. A method of applying two-pump system in automatic transmissions for energy conservation

    Directory of Open Access Journals (Sweden)

    Peng Dong

    2015-06-01

    Full Text Available In order to improve the hydraulic efficiency, modern automatic transmissions tend to apply electric oil pump in their hydraulic system. The electric oil pump can support the mechanical oil pump for cooling, lubrication, and maintaining the line pressure at low engine speeds. In addition, the start–stop function can be realized by means of the electric oil pump; thus, the fuel consumption can be further reduced. This article proposes a method of applying two-pump system (one electric oil pump and one mechanical oil pump in automatic transmissions based on the forward driving simulation. A mathematical model for calculating the transmission power loss is developed. The power loss transfers to heat which requires oil flow for cooling and lubrication. A leakage model is developed to calculate the leakage of the hydraulic system. In order to satisfy the flow requirement, a flow-based control strategy for the electric oil pump is developed. Simulation results of different driving cycles show that there is a best combination of the size of electric oil pump and the size of mechanical oil pump with respect to the optimal energy conservation. Besides, the two-pump system can also satisfy the requirement of the start–stop function. This research is extremely valuable for the forward design of a two-pump system in automatic transmissions with respect to energy conservation and start–stop function.

  15. Applying Systems Thinking to Examine and Reduce Dependency on Food Banks

    Directory of Open Access Journals (Sweden)

    Juwaeriah Abdussamad

    2014-01-01

    Full Text Available Systems thinking is the art of understanding interconnections between various disciplines thereby unwinding the existing complexity. Most of the real world problems are complex, take for the example the increasing dependency rate on food banks. While various factors contribute towards it, not much has been done to bring the take off the number of dependents. By viewing this system from a holistic systems thinking lens, one explores the issue in depth. We realise the universally acceptable solution is not alleviating the problem in the long run. By applying systems thinking principles several hidden factors are brought to attention and subsequently can be dealt with more aptly. A movement that transcends disciplines results in delivering better solutions.

  16. Econometrics analysis of consumer behaviour: a linear expenditure system applied to energy

    International Nuclear Information System (INIS)

    Giansante, C.; Ferrari, V.

    1996-12-01

    In economics literature the expenditure system specification is a well known subject. The problem is to define a coherent representation of consumer behaviour through functional forms easy to calculate. In this work it is used the Stone-Geary Linear Expenditure System and its multi-level decision process version. The Linear Expenditure system is characterized by an easy calculating estimation procedure, and its multi-level specification allows substitution and complementary relations between goods. Moreover, the utility function separability condition on which the Utility Tree Approach is based, justifies to use an estimation procedure in two or more steps. This allows to use an high degree of expenditure categories disaggregation, impossible to reach the Linear Expediture System. The analysis is applied to energy sectors

  17. Student ability to apply the concepts of work and energy to extended systems

    Science.gov (United States)

    Lindsey, Beth A.; Heron, Paula R. L.; Shaffer, Peter S.

    2009-11-01

    We report results from an investigation of student ability to apply the concepts of work and energy to situations in which the internal structure of a system cannot be ignored, that is, the system cannot be treated as a particle. Students in introductory calculus-based physics courses were asked written and online questions after relevant instruction by lectures, textbook, and laboratory. Several difficulties were identified. Some related to student ability to calculate the work done on a system. Failure to associate work with the change in energy of a system was also widespread. The results have implications for instruction that aims for a rigorous treatment of energy concepts that is consistent with the first law of thermodynamics. The findings are guiding the development of two tutorials to supplement instruction.

  18. A reflective lens: applying critical systems thinking and visual methods to ecohealth research.

    Science.gov (United States)

    Cleland, Deborah; Wyborn, Carina

    2010-12-01

    Critical systems methodology has been advocated as an effective and ethical way to engage with the uncertainty and conflicting values common to ecohealth problems. We use two contrasting case studies, coral reef management in the Philippines and national park management in Australia, to illustrate the value of critical systems approaches in exploring how people respond to environmental threats to their physical and spiritual well-being. In both cases, we used visual methods--participatory modeling and rich picturing, respectively. The critical systems methodology, with its emphasis on reflection, guided an appraisal of the research process. A discussion of these two case studies suggests that visual methods can be usefully applied within a critical systems framework to offer new insights into ecohealth issues across a diverse range of socio-political contexts. With this article, we hope to open up a conversation with other practitioners to expand the use of visual methods in integrated research.

  19. A systematic review of applying modern software engineering techniques to developing robotic systems

    Directory of Open Access Journals (Sweden)

    Claudia Pons

    2012-01-01

    Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

  20. Applied ELT: A Paradigm Justifying Complex Adaptive System of Language Teaching?

    Directory of Open Access Journals (Sweden)

    Masoud Mahmoodzadeh

    2013-12-01

    Full Text Available In an endeavor to reflect on the advent of Applied ELT paradigm pioneered by Pishghadam (2011 in the area of second language education, this article delves into the unexplored nature of this emerging paradigm via a contemporary complexity-driven voice. The crux of the argument addressed in this article suggests that Applied ELT is a pragmatic manifestation of complex adaptive system of language teaching. To set the grounds expressly for such enquiry, firstly it draws on both premises and axioms associated with complexity theory and its existing literature in the circle of second language research. It then tracks down the evolutionary course of the new developed paradigm of Applied ELT within the realm of second language education and also elaborates the cornerstone and manifold tenets of this paradigm sufficiently. Finally, the article attempts to critically elucidate and rationalize the recent emergence of Applied ELT paradigm through the lens of complexity theory. To broaden our thinking and understanding about the potential and multi-directional influence of ELT field, the article ends by calling for a reshaped educational direction for ELT position in second language education.

  1. Study of fieldbus technology confiability when applied in a Sterilization plant control and safety systems

    International Nuclear Information System (INIS)

    Karma, D.; Sampa, M.H.O.; Rela, P.R.

    2001-01-01

    Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible the application of that process, in 1960, also in the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides news applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. This paper show preliminary study about confiability in systems using Fieldbus technology. This technology was simulated in sterilization plant control and safety systems and the fail probability was quantified using Fail Tree Analysis Method. Fieldbus technology can be used in sterilization plants because the confiability in this systems is like PLCs and relays systems, was the conclusion

  2. [Cost of therapy for neurodegenerative diseases. Applying an activity-based costing system].

    Science.gov (United States)

    Sánchez-Rebull, María-Victoria; Terceño Gómez, Antonio; Travé Bautista, Angeles

    2013-01-01

    To apply the activity based costing (ABC) model to calculate the cost of therapy for neurodegenerative disorders in order to improve hospital management and allocate resources more efficiently. We used the case study method in the Francolí long-term care day center. We applied all phases of an ABC system to quantify the cost of the activities developed in the center. We identified 60 activities; the information was collected in June 2009. The ABC system allowed us to calculate the average cost per patient with respect to the therapies received. The most costly and commonly applied technique was psycho-stimulation therapy. Focusing on this therapy and on others related to the admissions process could lead to significant cost savings. ABC costing is a viable method for costing activities and therapies in long-term day care centers because it can be adapted to their structure and standard practice. This type of costing allows the costs of each activity and therapy, or combination of therapies, to be determined and aids measures to improve management. Copyright © 2012 SESPAS. Published by Elsevier Espana. All rights reserved.

  3. Galvanic Liquid Applied Coating System For Protection of Embedded Steel Surfaces from Corrosion

    Science.gov (United States)

    Curran, Joseph; Curran, Jerome; Voska, N. (Technical Monitor)

    2002-01-01

    Corrosion of reinforcing steel in concrete is an insidious problem facing Kennedy Space Center (KSC), other Government Agencies, and the general public. These problems include KSC launch support structures, highway bridge infrastructure, and building structures such as condominium balconies. Due to these problems, the development of a Galvanic Liquid Applied Coating System would be a breakthrough technology having great commercial value for the following industries: Transportation, Infrastructure, Marine Infrastructure, Civil Engineering, and the Construction Industry. This sacrificial coating system consists of a paint matrix that may include metallic components, conducting agents, and moisture attractors. Similar systems have been used in the past with varying degrees of success. These systems have no proven history of effectiveness over the long term. In addition, these types of systems have had limited success overcoming the initial resistance between the concrete/coating interface. The coating developed at KSC incorporates methods proven to overcome the barriers that previous systems could not achieve. Successful development and continued optimization of this breakthrough system would produce great interest in NASA/KSC for corrosion engineering technology and problem solutions. Commercial patents on this technology would enhance KSC's ability to attract industry partners for similar corrosion control applications.

  4. Feasibility study of applying the passive safety system concept to fusion–fission hybrid reactor

    International Nuclear Information System (INIS)

    Yu, Zhang-cheng; Xie, Heng

    2014-01-01

    The fusion–fission hybrid reactor can produce energy, breed nuclear fuel, and handle the nuclear waste, etc., with the fusion neutron source striking the subcritical blanket. The passive safety system consists of passive residual heat removal system, passive safety injection system and automatic depressurization system was adopted into the fusion–fission hybrid reactor in this paper. Modeling and nodalization of primary loop, partial secondary loop and passive core cooling system for the fusion–fission hybrid reactor using relap5 were conducted and small break LOCA on cold leg was analyzed. The results of key transient parameters indicated that the actuation of passive safety system could mitigate the accidental consequence of the 4-inch cold leg small break LOCA on cold leg in the early time effectively. It is feasible to apply the passive safety system concept to fusion–fission hybrid reactor. The minimum collapsed liquid level had great increase if doubling the volume of CMTs to increase its coolant injection and had no increase if doubling the volume of ACCs

  5. A study of penetration test for applying a remote monitoring system for virtual private network

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. S.; Park, I. J.; Min, K. S.; Choi, Y. M. [KAERI, Taejon (Korea, Republic of); Jo, D. K. [A3 Security Consulting Co., Seoul (Korea, Republic of)

    2003-07-01

    A penetration test has been performed to verify the vulnerability of Virtual Private Network that is substitute for communication method of an existing remote monitoring system. An existing RMS was used for the private telephone and the RMS was applied of all PWR in Korea. But, due to communication fee, IAEA wanted to replace current telephone line to the internet line to reduce transmission cost in operating remote monitoring system. The communication cost of telephone line was estimated about $66,000/yr. Internet technology would reduce the operating cost up to 1/5. The purpose of the penetration test was to demonstrate the security of the data and system against both various external and internal hacking scenarios. In most cases, hacker could not even identify the VPN system. In any cases, the system did not allow the access of the hacker to the system needless to say the data alteration or system shutdown. Two kinds of test method is chosen; one is external attack and another is internal attack. During the test, the hacking tool was used. The result of test was proved that VPN was secure against internal/external attack.

  6. A study of penetration test for applying a remote monitoring system for virtual private network

    International Nuclear Information System (INIS)

    Kim, J. S.; Kim, J. S.; Park, I. J.; Min, K. S.; Choi, Y. M.; Jo, D. K.

    2003-01-01

    A penetration test has been performed to verify the vulnerability of Virtual Private Network that is substitute for communication method of an existing remote monitoring system. An existing RMS was used for the private telephone and the RMS was applied of all PWR in Korea. But, due to communication fee, IAEA wanted to replace current telephone line to the internet line to reduce transmission cost in operating remote monitoring system. The communication cost of telephone line was estimated about $66,000/yr. Internet technology would reduce the operating cost up to 1/5. The purpose of the penetration test was to demonstrate the security of the data and system against both various external and internal hacking scenarios. In most cases, hacker could not even identify the VPN system. In any cases, the system did not allow the access of the hacker to the system needless to say the data alteration or system shutdown. Two kinds of test method is chosen; one is external attack and another is internal attack. During the test, the hacking tool was used. The result of test was proved that VPN was secure against internal/external attack

  7. Nonlinear model updating applied to the IMAC XXXII Round Robin benchmark system

    Science.gov (United States)

    Kurt, Mehmet; Moore, Keegan J.; Eriten, Melih; McFarland, D. Michael; Bergman, Lawrence A.; Vakakis, Alexander F.

    2017-05-01

    We consider the application of a new nonlinear model updating strategy to a computational benchmark system. The approach relies on analyzing system response time series in the frequency-energy domain by constructing both Hamiltonian and forced and damped frequency-energy plots (FEPs). The system parameters are then characterized and updated by matching the backbone branches of the FEPs with the frequency-energy wavelet transforms of experimental and/or computational time series. The main advantage of this method is that no nonlinearity model is assumed a priori, and the system model is updated solely based on simulation and/or experimental measured time series. By matching the frequency-energy plots of the benchmark system and its reduced-order model, we show that we are able to retrieve the global strongly nonlinear dynamics in the frequency and energy ranges of interest, identify bifurcations, characterize local nonlinearities, and accurately reconstruct time series. We apply the proposed methodology to a benchmark problem, which was posed to the system identification community prior to the IMAC XXXII (2014) and XXXIII (2015) Conferences as a "Round Robin Exercise on Nonlinear System Identification". We show that we are able to identify the parameters of the non-linear element in the problem with a priori knowledge about its position.

  8. On the measurement of the neutrino velocity applying the standard time of the Global Positioning System

    International Nuclear Information System (INIS)

    Skeivalas, J; Parseliunas, E

    2013-01-01

    The measurement of the neutrino velocity applying the standard time of the Global Positioning System (GPS) is presented in the paper. The practical data were taken from the OPERA experiment, in which neutrino emission from the CERN LHC accelerator to Gran Sasso detector was investigated. The distance between accelerator and detector is about 730 km. The time interval was measured by benchmark clocks, which were calibrated by the standard GPS time signals received from GPS satellites. The calculation of the accuracy of the GPS time signals with respect to changes of the signals' frequencies due to the Doppler effect is presented. It is shown that a maximum error of about 200 ns could occur when GPS time signals are applied for the calibration of the clocks for the neutrino velocity measurements. (paper)

  9. Feasibility evaluation of two solar cooling systems applied to a cuban hotel. Comparative analysis

    International Nuclear Information System (INIS)

    Díaz Torres, Yamile; Valdivia Nodal, Yarelis; Monteagudo Yanes, José Pedro; Miranda Torres, Yudit

    2016-01-01

    The article presents an analysis of technical and economic feasibility of using two configurations of solar cooling in a Cuban hotel. HVAC hybrid schemes are: a cooler of ice water vapor compression (chiller) interconnected in parallel with a smaller capacity chiller, first with a solar-powered absorption cooling system (SACS), and then with a photovoltaic cooling system(PSC). Both were simulated taking into account the weather conditions in the region, thermodynamic calculation methodologies and principles that govern these technologies. The results show that the use of these alternatives contributes to reducing energy consumption and the environmental impact of heating, ventilation and air conditioning systems (HVAC). Economic analysis highlights that PCS is more favorable than the SACS taking into account the cooling cost generation (CCG) but energy assessment indicates that SACS has higher thermal performance for the case study to which it is applied. (author)

  10. Teh CRE system applied to continuous irradiation. A Physician's view. Chapter 30

    International Nuclear Information System (INIS)

    Watson, E.R.

    1980-01-01

    The CRE system, used in radiotherapy, is an attempt at a simple, empirical model predicting the response of tissue to irradiation. The two basic formulae used in the CRE system are given followed by a consideration of a number of variable factors which may influence the CRE values. The Cathetron afterloading radiotherapy device demands a completely different schedule from those to which the CRE system is normally applied. The problem of converting a continuous intracavitary schedule to one of fractionated intracavitary treatment for the Cathetron is considered particularly in relation to the volume effect of continuous radiation and also to the wide variation of dose across the volume. It is concluded that in the present state of knowledge it would be unwise to make confident predictions of Cathetron doses on the basis of empirical descriptions such as the CRE. (U.K.)

  11. Control Theory Concepts Applied to Retail Supply Chain: A System Dynamics Modeling Environment Study

    Directory of Open Access Journals (Sweden)

    Balaji Janamanchi

    2013-01-01

    Full Text Available Control theory concepts have been long used to successfully manage and optimize complex systems. Using system dynamics (SD modeling methodology, which is continuous deterministic simulation modeling methodology, we apply control theory concepts to develop a suitable performance functional (or objective function that optimizes the performance of a retail supply chain. The focus is to develop insights for inventory management to prevent stock-outs and unfilled orders and to fill customer orders at the lowest possible cost to supply chain partners under different scenarios, in a two-player supplier-retailer supply chain. Moderate levels of inventory, defining appropriate performance functional, appear to be crucial in choosing the right policies for managing retail supply chain systems. The study also demonstrated how multiple objectives can be combined in a single performance functional (or objective function by carefully assigning suitable weights to the components of objectives based on their priority and the existence of possible trade off opportunities.

  12. Comparison of gradient methods for gain tuning of a PD controller applied on a quadrotor system

    Science.gov (United States)

    Kim, Jinho; Wilkerson, Stephen A.; Gadsden, S. Andrew

    2016-05-01

    Many mechanical and electrical systems have utilized the proportional-integral-derivative (PID) control strategy. The concept of PID control is a classical approach but it is easy to implement and yields a very good tracking performance. Unmanned aerial vehicles (UAVs) are currently experiencing a significant growth in popularity. Due to the advantages of PID controllers, UAVs are implementing PID controllers for improved stability and performance. An important consideration for the system is the selection of PID gain values in order to achieve a safe flight and successful mission. There are a number of different algorithms that can be used for real-time tuning of gains. This paper presents two algorithms for gain tuning, and are based on the method of steepest descent and Newton's minimization of an objective function. This paper compares the results of applying these two gain tuning algorithms in conjunction with a PD controller on a quadrotor system.

  13. Inter-Enterprise Planning of Manufacturing Systems Applying Simulation with IPR Protection

    Science.gov (United States)

    Mertins, Kai; Rabe, Markus

    Discrete Event Simulation is a well-proved method to analyse the dynamic behaviour of manufacturing systems. However, simulation application is still poor for external supply chains or virtual enterprises, encompassing several legal entities. Most conventional simulation systems provide no means to protect intellectual property rights (IPR), nor methods to support cross-enterprise teamwork. This paper describes a solution to keep enterprise models private, but still provide their functionality for cross-enterprise evaluation purposes. Applying the new modelling system, the inter-enterprise business process is specified by the user, including a specification of the objects exchanged between the local models. The required environment for a distributed simulation is generated automatically. The mechanisms have been tested with a large supply chain model.

  14. Applying system engineering methods to site characterization research for nuclear waste repositories

    International Nuclear Information System (INIS)

    Woods, T.W.

    1985-01-01

    Nuclear research and engineering projects can benefit from the use of system engineering methods. This paper is brief overview illustrating how system engineering methods could be applied in structuring a site characterization effort for a candidate nuclear waste repository. System engineering is simply an orderly process that has been widely used to transform a recognized need into a fully defined system. Such a system may be physical or abstract, natural or man-made, hardware or procedural, as is appropriate to the system's need or objective. It is a way of mentally visualizing all the constituent elements and their relationships necessary to fulfill a need, and doing so compliant with all constraining requirements attendant to that need. Such a system approach provides completeness, order, clarity, and direction. Admittedly, system engineering can be burdensome and inappropriate for those project objectives having simple and familiar solutions that are easily held and controlled mentally. However, some type of documented and structured approach is needed for those objectives that dictate extensive, unique, or complex programs, and/or creation of state-of-the-art machines and facilities. System engineering methods have been used extensively and successfully in these cases. The scientific methods has served well in ordering countless technical undertakings that address a specific question. Similarly, conventional construction and engineering job methods will continue to be quite adequate to organize routine building projects. Nuclear waste repository site characterization projects involve multiple complex research questions and regulatory requirements that interface with each other and with advanced engineering and subsurface construction techniques. There is little doubt that system engineering is an appropriate orchestrating process to structure such diverse elements into a cohesive, well defied project

  15. NATO International Conference on Applied General Systems Research : Recent Developments and Trends

    CERN Document Server

    1978-01-01

    This volume consists of a selection of papers presented at the International Conference on Applied General Systems Research: Recent Developments and Trends which was held on the campus of the State University of New York at Binghamton in August 15-19, 1977, under the sponsorship of the Special Panel on Systems Science of the NATO Scientific Affairs Division. General systems research is a fairly new field which has been developing in the course of the last two or three decades. In my op~n10n, it can be best described as a movement which involves the study of all structural and context independent aspects of problem solving. As such, it is cross-disciplinary in nature and, in this sense, it might seem similar to mathematics. There is a consid­ erable difference, however, between the two. While pure mathe­ matics is basically oriented to the development of various axiomatic theories, regardless of whether or not they have any real world meaning, applied mathematics explores the applicability of some of these t...

  16. Applied learning-based color tone mapping for face recognition in video surveillance system

    Science.gov (United States)

    Yew, Chuu Tian; Suandi, Shahrel Azmin

    2012-04-01

    In this paper, we present an applied learning-based color tone mapping technique for video surveillance system. This technique can be applied onto both color and grayscale surveillance images. The basic idea is to learn the color or intensity statistics from a training dataset of photorealistic images of the candidates appeared in the surveillance images, and remap the color or intensity of the input image so that the color or intensity statistics match those in the training dataset. It is well known that the difference in commercial surveillance cameras models, and signal processing chipsets used by different manufacturers will cause the color and intensity of the images to differ from one another, thus creating additional challenges for face recognition in video surveillance system. Using Multi-Class Support Vector Machines as the classifier on a publicly available video surveillance camera database, namely SCface database, this approach is validated and compared to the results of using holistic approach on grayscale images. The results show that this technique is suitable to improve the color or intensity quality of video surveillance system for face recognition.

  17. A methodological framework applied to the choice of the best method in replacement of nuclear systems

    International Nuclear Information System (INIS)

    Vianna Filho, Alfredo Marques

    2009-01-01

    The economic equipment replacement problem is a central question in Nuclear Engineering. On the one hand, new equipment are more attractive given their best performance, better reliability, lower maintenance cost etc. New equipment, however, require a higher initial investment. On the other hand, old equipment represent the other way around, with lower performance, lower reliability and specially higher maintenance costs, but in contrast having lower financial and insurance costs. The weighting of all these costs can be made with deterministic and probabilistic methods applied to the study of equipment replacement. Two types of distinct problems will be examined, substitution imposed by the wearing and substitution imposed by the failures. In order to solve the problem of nuclear system substitution imposed by wearing, deterministic methods are discussed. In order to solve the problem of nuclear system substitution imposed by failures, probabilistic methods are discussed. The aim of this paper is to present a methodological framework to the choice of the most useful method applied in the problem of nuclear system substitution.(author)

  18. YBCO nanoSQUIDs applied to the investigation of small spin systems

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Perez, Maria Jose; Schwarz, Tobias; Woelbing, Roman; Mueller, Benedikt; Kleiner, Reinhold; Koelle, Dieter [Physikalisches Institut and Center for Collective Quantum Phenomena in LISA" +, Universitaet Tuebingen (Germany); Reiche, Christopher F.; Muehl, Thomas; Buechner, Bernd [Leibniz Institute for Solid State and Materials Research IFW Dresden (Germany); Sese, Javier [Instituto de Nanociencia de Aragon and Advanced Microscopy Laboratory, Zaragoza (Spain)

    2015-07-01

    We present the realization of ultra-sensitive YBCO nanoSQUIDs based on submicron grain boundary junctions patterned by focused ion beam milling. White flux noise down to ∝ 50nΦ{sub 0}/Hz{sup 1/2} has been achieved, yielding spin sensitivities of down to a few μ{sub B}/Hz{sup 1/2} at T=4.2 K. Moreover, we demonstrate that magnetic fields up to the tesla range can be applied, fulfilling a fundamental condition for the study of small spin systems. As a proof-of-principle we present the successful deposition of a Fe-filled carbon nanotube (∝ 40 nm in diameter and ∝ 14 μm in length) and an individual Co nanopillar (base diameter of ∝ 50 nm and height ∝ 10 nm) close to the nanoSQUID loop. We show that sub-micrometric control over the particle position lead to large magnetic coupling factors between the nano-loop and the spin system. Together with the possibility of applying large magnetic fields, the latter has allowed us to directly observe the magnetization reversal of these spin systems at different temperatures.

  19. The case for using vessel-based systems to apply oil-spill dispersants

    International Nuclear Information System (INIS)

    Ross, S.

    1998-01-01

    Most emergency plans for dealing with marine oil spills include the use of chemical dispersants. This paper presents a comparison between the capabilities of aircraft-based dispersant application systems and vessel-based systems. The comparison was presented in terms of the logistics of treating offshore spills. Vessel-based systems have certain advantages in terms of their availability and cost. They have better spray control and accuracy and can dose thick slicks in one pass. However, this advantage is lost if the dispersant payload on the vessel is relatively small and the spill is located very far from the base of operations. Under certain conditions, vessel-based dispersant application systems can treat spills as quickly as aircraft-based systems. Most marine spills tend to occur in restricted waters near ports where dispersant stockpiles could be stored for ready use by vessels in the area. Development of a modern vessel-based, fire-monitor system for applying chemical dispersant onto marine oil spills was one of the recommendations emerging from the study. 32 refs., 6 tabs., 1 fig

  20. The interactive systems framework applied to the strategic prevention framework: the Rhode Island experience.

    Science.gov (United States)

    Florin, Paul; Friend, Karen B; Buka, Stephen; Egan, Crystelle; Barovier, Linda; Amodei, Brenda

    2012-12-01

    The Interactive Systems Framework for Dissemination and Implementation (ISF) was introduced as a heuristic systems level model to help bridge the gap between research and practice (Wandersman et al., in Am J Commun Psychol 41:171-181, 2008). This model describes three interacting systems with distinct functions that (1) distill knowledge to develop innovations; (2) provide supportive training and technical assistance for dissemination to; (3) a prevention delivery system responsible for implementation in the field. The Strategic Prevention Framework (SPF) is a major prevention innovation launched by the Center for Substance Abuse Prevention (CSAP) of the Substance Abuse and Mental Health Services Administration (SAMHSA). The SPF offers a structured, sequential, data-driven approach that explicitly targets environmental conditions in the community and aims for change in substance use and problems at the population level. This paper describes how the ISF was applied to the challenges of implementing the SPF in 14 Rhode Island communities, with a focus on the development of a new Training and Technical Assistance Resources Center to support SPF efforts. More specifically, we (1) describe each of the three ISF interacting systems as they evolved in Rhode Island; (2) articulate the lines of communication between the three systems; and (3) examine selected evaluation data to understand relationships between training and technical assistance and SPF implementation and outcomes.

  1. Applying a Stochastic Financial Planning System to an Individual: Immediate or Deferred Life Annuities?

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    2013-01-01

    of such financial decisions, especially in the retirement arena. They present as an example the choice to purchase a life annuity for a middle-aged person. Buyers must choose whether to purchase before retirement or at the date of retirement. The article provides some guidelines on whether or not to purchase......Individuals are often faced with financial decisions that have long-term implications for themselves and their families, but they have few sources of unbiased assistance. The authors suggest that a stochastic financial planning system, properly constructed and calibrated, can be applied to a number...... deferred life annuities, and who might most benefit from such a purchase....

  2. Induction Heating System Applied to Injection Moulding of Micro and Nano Structures

    DEFF Research Database (Denmark)

    Menotti, Stefano

    The present Ph.D. thesis contains a study concerning induction heating system applied to injection moulding of micro and nano structures. The overall process chain was considered and investigated during the project including part design, simulation, conventional and non-conventional tooling...... part. In fact one of the main problems in micro injection moulding is the premature freezing of the polymer flow inside the cavity and often is not possible to obtain a full replica of the nano/micro structures embed on the surfaces. Some other defects that can be avoided with the use of an additional...

  3. Renormalization techniques applied to the study of density of states in disordered systems

    International Nuclear Information System (INIS)

    Ramirez Ibanez, J.

    1985-01-01

    A general scheme for real space renormalization of formal scattering theory is presented and applied to the calculation of density of states (DOS) in some finite width systems. This technique is extended in a self-consistent way, to the treatment of disordered and partially ordered chains. Numerical results of moments and DOS are presented in comparison with previous calculations. In addition, a self-consistent theory for the magnetic order problem in a Hubbard chain is derived and a parametric transition is observed. Properties of localization of the electronic states in disordered chains are studied through various decimation averaging techniques and using numerical simulations. (author) [pt

  4. Study of applying a hybrid standalone wind-photovoltaic generation system

    Directory of Open Access Journals (Sweden)

    Aissa Dahmani

    2015-01-01

    Full Text Available The purpose of this paper is the study of applying a hybrid system wind/photovoltaic to supply a community in southern Algeria. Diesel generators are always used to provide such remote regions with energy. Using renewable energy resources is a good alternative to overcome such pollutant generators. Hybrid Optimization Model for Electric Renewable (HOMER software is used to determine the economic feasibility of the proposed configuration. Assessment of renewable resources consisting in wind and solar potentials, load profile determination and sensitivity of different parameters analysis were performed. The cost of energy (COE of 0.226 $/kWh is very competitive with those found in literature.

  5. Multiclassifier system with hybrid learning applied to the control of bioprosthetic hand.

    Science.gov (United States)

    Kurzynski, Marek; Krysmann, Maciej; Trajdos, Pawel; Wolczowski, Andrzej

    2016-02-01

    In this paper the problem of recognition of the intended hand movements for the control of bio-prosthetic hand is addressed. The proposed method is based on recognition of electromiographic (EMG) and mechanomiographic (MMG) biosignals using a multiclassifier system (MCS) working in a two-level structure with a dynamic ensemble selection (DES) scheme and original concepts of competence function. Additionally, feedback information coming from bioprosthesis sensors on the correct/incorrect classification is applied to the adjustment of the combining mechanism during MCS operation through adaptive tuning competences of base classifiers depending on their decisions. Three MCS systems operating in decision tree structure and with different tuning algorithms are developed. In the MCS1 system, competence is uniformly allocated to each class belonging to the group indicated by the feedback signal. In the MCS2 system, the modification of competence depends on the node of decision tree at which a correct/incorrect classification is made. In the MCS3 system, the randomized model of classifier and the concept of cross-competence are used in the tuning procedure. Experimental investigations on the real data and computer-simulated procedure of generating feedback signals are performed. In these investigations classification accuracy of the MCS systems developed is compared and furthermore, the MCS systems are evaluated with respect to the effectiveness of the procedure of tuning competence. The results obtained indicate that modification of competence of base classifiers during the working phase essentially improves performance of the MCS system and that this improvement depends on the MCS system and tuning method used. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Unconventional isotope systems applied to enhancing the petrogenesis of uranium deposits

    International Nuclear Information System (INIS)

    Voignot, A.; Chipley, D.; Kyser, K.; Uvarova, Y.

    2014-01-01

    Among the new techniques applied to the petrogenesis and evolution of uranium deposits from their formation to later alteration is isotope tracing. The isotope systems being used include Li, C, N, Fe, Mo, Tl, Pb and U, all of which reflect different, but overlapping, processes. Although Pb isotopes have been used to understand the temporal evolution and migration of radiogenic Pb from the deposits, Li, C, N, Mo, Tl and U isotope systems are new ways to analyze deposits and barren areas and to reveal their precise redox mechanisms. Geochemical technologies for exploration include "2"3"8U/"2"3"5U ratios of uranium minerals, which vary as a function of the type of uranium deposit and the efficiency of the redox processes. Lithium isotope ratios in muscovite and chlorite associated with mineralizing events are distinct from background ratios, with the lowest values reflecting the beginning of hydrothermal alteration systems and the highest values indicative of the terminal flow of hydrothermal fluids. Carbon and N reflect the influence of biospheric processes on the deposits and dispersion of elements that can be used for exploration. Iron, Mo and Tl are common elements in many uranium deposits and are among the most redox active elements. Their isotopes separate among phases having different oxidation potentials. They reflect the efficiency of the redox systems associated with fixing the uranium and the subsequent processes involved in mobilizing elements from the deposits. Isotopes add benefits to refining genetic models for uranium deposits, thereby enhancing our exploration models as well. An additional goal of applying isotope geochemistry to uranium deposits is to be able to use them to reflect a definitive process that occurs in the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. (author)

  7. Long-term bond strength of adhesive systems applied to etched and deproteinized dentin

    Directory of Open Access Journals (Sweden)

    Ninoshka Uceda-Gómez

    2007-12-01

    Full Text Available The aim of this study was to evaluate the early and 12-month bond strength of two adhesive systems (Single Bond-SB and One Step-OS applied to demineralized dentin (WH and demineralized/NaOCl-treated dentin (H. Twenty flat dentin surfaces were exposed, etched, rinsed and slightly dried. For the H groups, a solution of 10% NaOCl was applied for 60 s, rinsed (15 s and slightly dried. The adhesives were applied according to the manufacturer's instructions and composite resin crowns were incrementally constructed. After 24 h (water-37ºC, the specimens was sectioned in order to obtain resin-dentin sticks (0.8 mm². The specimens were tested in microtensile (0.5 mm/min immediately (IM or after 12 months of water storage (12M. The data (MPa were subjected to ANOVA and Tukey's test (a=0.05. Only the main factors adhesive and time were significant (p=0.004 and p=0.003, respectively. SB (42.3±9.1 showed higher bond strengths than OS (33.6±11.6. The mean bond strength for IM-group (42.5±8.7 was statistically superior to 12M (33.3±11.8. The use of 10% NaOCl, after acid etching, did not improve the immediate and the long-term resin-dentin bond strength.

  8. Success Factors of European Syndromic Surveillance Systems: A Worked Example of Applying Qualitative Comparative Analysis.

    Science.gov (United States)

    Ziemann, Alexandra; Fouillet, Anne; Brand, Helmut; Krafft, Thomas

    2016-01-01

    Syndromic surveillance aims at augmenting traditional public health surveillance with timely information. To gain a head start, it mainly analyses existing data such as from web searches or patient records. Despite the setup of many syndromic surveillance systems, there is still much doubt about the benefit of the approach. There are diverse interactions between performance indicators such as timeliness and various system characteristics. This makes the performance assessment of syndromic surveillance systems a complex endeavour. We assessed if the comparison of several syndromic surveillance systems through Qualitative Comparative Analysis helps to evaluate performance and identify key success factors. We compiled case-based, mixed data on performance and characteristics of 19 syndromic surveillance systems in Europe from scientific and grey literature and from site visits. We identified success factors by applying crisp-set Qualitative Comparative Analysis. We focused on two main areas of syndromic surveillance application: seasonal influenza surveillance and situational awareness during different types of potentially health threatening events. We found that syndromic surveillance systems might detect the onset or peak of seasonal influenza earlier if they analyse non-clinical data sources. Timely situational awareness during different types of events is supported by an automated syndromic surveillance system capable of analysing multiple syndromes. To our surprise, the analysis of multiple data sources was no key success factor for situational awareness. We suggest to consider these key success factors when designing or further developing syndromic surveillance systems. Qualitative Comparative Analysis helped interpreting complex, mixed data on small-N cases and resulted in concrete and practically relevant findings.

  9. Environment-oriented life cycle analysis of bulk materials, applied in solar cell systems

    International Nuclear Information System (INIS)

    Geelen, H.

    1994-04-01

    In the solar cell technology several bulk materials (glass, steel, aluminium, concrete, copper, zinc and synthetic materials) are applied intensively. By means of a life cycle analysis (LCA) the environmental effects and bottlenecks of the use of these materials is investigated in this report. Also attention is paid to the options to reduce the environmental effects of photovoltaic (PV) systems by changing processes and/or by redesign of the PV systems. Two systems are studied: solar cells, integrated in pitched roofs, and solar cells on the ground in solar cell arrays. The study is focused on the use of bulk materials in the solar module, the cables and the supporting construction. After brief introductions on the environment-oriented LCA method, the standard construction of PV modules and the principles of solar cells, an overview is given of the present and future material input for the above-mentioned PV-systems. Next, attention is paid to the energy consumption and the most important emissions of the production of the bulk materials. Based on these data three environmental effect scores of the PV systems are calculated and analyzed: the energy consumption, the greenhouse effect or global warming equivalent, and the acidifying effect or acidification equivalent. Also a fourth effect, for which the so-called environmental indicator human toxicity is defined, is described. By means of this indicator the hazardous effects for the public health can be indicated. The sum of the four indicators is a measure for the environmental profile of the roof PV-system and the ground PV-array system. Recommendations are given by which the systems and their environmental profiles can be improved. 29 figs., 50 tabs., 5 appendices, refs

  10. Applying Required Navigation Performance Concept for Traffic Management of Small Unmanned Aircraft Systems

    Science.gov (United States)

    Jung, Jaewoo; D'Souza, Sarah N.; Johnson, Marcus A.; Ishihara, Abraham K.; Modi, Hemil C.; Nikaido, Ben; Hasseeb, Hashmatullah

    2016-01-01

    In anticipation of a rapid increase in the number of civil Unmanned Aircraft System(UAS) operations, NASA is researching prototype technologies for a UAS Traffic Management (UTM) system that will investigate airspace integration requirements for enabling safe, efficient low-altitude operations. One aspect a UTM system must consider is the correlation between UAS operations (such as vehicles, operation areas and durations), UAS performance requirements, and the risk to people and property in the operational area. This paper investigates the potential application of the International Civil Aviation Organizations (ICAO) Required Navigation Performance (RNP) concept to relate operational risk with trajectory conformance requirements. The approach is to first define a method to quantify operational risk and then define the RNP level requirement as a function of the operational risk. Greater operational risk corresponds to more accurate RNP level, or smaller tolerable Total System Error (TSE). Data from 19 small UAS flights are used to develop and validate a formula that defines this relationship. An approach to assessing UAS-RNP conformance capability using vehicle modeling and wind field simulation is developed to investigate how this formula may be applied in a future UTM system. The results indicate the modeled vehicles flight path is robust to the simulated wind variation, and it can meet RNP level requirements calculated by the formula. The results also indicate how vehicle-modeling fidelity may be improved to adequately verify assessed RNP level.

  11. A Low Cost Concept for Data Acquisition Systems Applied to Decentralized Renewable Energy Plants

    Directory of Open Access Journals (Sweden)

    Fábio T. Brito

    2011-01-01

    Full Text Available The present paper describes experiences of the use of monitoring and data acquisition systems (DAS and proposes a new concept of a low cost DAS applied to decentralized renewable energy (RE plants with an USB interface. The use of such systems contributes to disseminate these plants, recognizing in real time local energy resources, monitoring energy conversion efficiency and sending information concerning failures. These aspects are important, mainly for developing countries, where decentralized power plants based on renewable sources are in some cases the best option for supplying electricity to rural areas. Nevertheless, the cost of commercial DAS is still a barrier for a greater dissemination of such systems in developing countries. The proposed USB based DAS presents a new dual clock operation philosophy, in which the acquisition system contains two clock sources for parallel information processing from different communication protocols. To ensure the low cost of the DAS and to promote the dissemination of this technology in developing countries, the proposed data acquisition firmware and the software for USB microcontrollers programming is a free and open source software, executable in the Linux and Windows® operating systems.

  12. Applying Toyota production system techniques for medication delivery: improving hospital safety and efficiency.

    Science.gov (United States)

    Newell, Terry L; Steinmetz-Malato, Laura L; Van Dyke, Deborah L

    2011-01-01

    The inpatient medication delivery system used at a large regional acute care hospital in the Midwest had become antiquated and inefficient. The existing 24-hr medication cart-fill exchange process with delivery to the patients' bedside did not always provide ordered medications to the nursing units when they were needed. In 2007 the principles of the Toyota Production System (TPS) were applied to the system. Project objectives were to improve medication safety and reduce the time needed for nurses to retrieve patient medications. A multidisciplinary team was formed that included representatives from nursing, pharmacy, informatics, quality, and various operational support departments. Team members were educated and trained in the tools and techniques of TPS, and then designed and implemented a new pull system benchmarking the TPS Ideal State model. The newly installed process, providing just-in-time medication availability, has measurably improved delivery processes as well as patient safety and satisfaction. Other positive outcomes have included improved nursing satisfaction, reduced nursing wait time for delivered medications, and improved efficiency in the pharmacy. After a successful pilot on two nursing units, the system is being extended to the rest of the hospital. © 2010 National Association for Healthcare Quality.

  13. Applied information system-based in enhancing students' understanding towards higher order thinking (HOTS)

    Science.gov (United States)

    Hua, Ang Kean; Ping, Owi Wei

    2017-05-01

    The application of information and communications technology (ICT) had become more important in our daily life, especially in educational field. Teachers are encouraged to use information system-based in teaching Mathematical courses. Higher Order Thinking Skills (HOTS) approach is unable to explain using chalk and talk methods. It needs students to analyze, evaluate, and create by their own natural abilities. The aim of this research study was to evaluate the effectiveness of the application information system-based in enhance the students understanding about HOTS question. Mixed-methods or quantitative and qualitative approach was applied in collecting data, which involve only the standard five students and the teachers in Sabak Bernam, Selangor. Pra-postests was held before and after using information system-based in teaching to evaluate the students' understanding. The result from post-test indicates significant improvement which proves that the use of information system based able to enhance students' understanding about HOTS question and solve it. There were several factor influenced the students such as students' attitude, teachers attraction, school facilities, and computer approach. Teachers play an important role in attracting students to learn. Therefore, the school should provide a conducive learning environment and good facilities for students to learn so that they are able to access more information and always exposed to new knowledge. As conclusion, information system-based are able to enhance students understanding the need of HOTS questions and solve it.

  14. Open system architecture for condition based maintenance applied to a hydroelectric power plant

    Energy Technology Data Exchange (ETDEWEB)

    Amaya, E.J.; Alvares, A.J. [University of Brasilia (UnB), DF (Brazil). Mechanical and Mechatronic Dept.], Emails: eamaya@unb.br, alvares@AlvaresTech.com; Gudwin, R.R. [State University of Campinas (UNICAMP), SP (Brazil). Computer Engineering and Industrial Automation Dept.], E-mail: gudwin@dca.fee.unicamp.br

    2009-07-01

    The hydroelectric power plant of Balbina is implementing a condition based maintenance system applying an open, modular and scalable integrated architecture to provide comprehensive solutions and support to the end users like operational and maintenance team. The system called SIMPREBAL (Predictive Maintenance System of Balbina) is advocate of open standards, in particular through collaborative research programmers. In the developing is clearly understands the need for both, industry standards and a simple to use software development tool chain, supporting the development of complex condition based maintenance systems with multiple partners. The Open System Architecture for Condition Based Maintenance (OSA-CBM) is a standard that consider seven hierarchic layers that represent a logic transition or performed data flow from the data acquisition layer, through the intermediates layers as signal processing, condition monitor, health assessment, prognostics and decision support, to arrive to the presentation layer. SIMPREBAL is being implementing as an OSA-CBM software framework and tool set that allows the creation of truly integrated, comprehensive maintenance solutions through the internet. This paper identifies specific benefits of the application of the OSA-CBM in comprehensive solutions of condition based maintenance for a hydroelectric power plant. (author)

  15. 3rd International Doctoral Symposium on Applied Computation and Security Systems

    CERN Document Server

    Saeed, Khalid; Cortesi, Agostino; Chaki, Nabendu

    2017-01-01

    This book presents extended versions of papers originally presented and discussed at the 3rd International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2016) held from August 12 to 14, 2016 in Kolkata, India. The symposium was jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy; and the University of Calcutta, India. The book is divided into two volumes, Volumes 3 and 4, and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next-Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering. The first two volumes of the book published the works presented at the ACSS 2015, which was held from May 23 to 25, 2015 in Kolkata, India.

  16. The mapping approach in the path integral formalism applied to curve-crossing systems

    International Nuclear Information System (INIS)

    Novikov, Alexey; Kleinekathoefer, Ulrich; Schreiber, Michael

    2004-01-01

    The path integral formalism in a combined phase-space and coherent-state representation is applied to the problem of curve-crossing dynamics. The system of interest is described by two coupled one-dimensional harmonic potential energy surfaces interacting with a heat bath consisting of harmonic oscillators. The mapping approach is used to rewrite the Lagrangian function of the electronic part of the system. Using the Feynman-Vernon influence-functional method the bath is eliminated whereas the non-Gaussian part of the path integral is treated using the generating functional for the electronic trajectories. The dynamics of a Gaussian wave packet is analyzed along a one-dimensional reaction coordinate within a perturbative treatment for a small coordinate shift between the potential energy surfaces

  17. Applied methods and techniques for mechatronic systems modelling, identification and control

    CERN Document Server

    Zhu, Quanmin; Cheng, Lei; Wang, Yongji; Zhao, Dongya

    2014-01-01

    Applied Methods and Techniques for Mechatronic Systems brings together the relevant studies in mechatronic systems with the latest research from interdisciplinary theoretical studies, computational algorithm development and exemplary applications. Readers can easily tailor the techniques in this book to accommodate their ad hoc applications. The clear structure of each paper, background - motivation - quantitative development (equations) - case studies/illustration/tutorial (curve, table, etc.) is also helpful. It is mainly aimed at graduate students, professors and academic researchers in related fields, but it will also be helpful to engineers and scientists from industry. Lei Liu is a lecturer at Huazhong University of Science and Technology (HUST), China; Quanmin Zhu is a professor at University of the West of England, UK; Lei Cheng is an associate professor at Wuhan University of Science and Technology, China; Yongji Wang is a professor at HUST; Dongya Zhao is an associate professor at China University o...

  18. Peak potential meter applied to X-ray tubes in mammal radiography systems

    International Nuclear Information System (INIS)

    Schiabel, Homero; Frere, Annie F.; Andreeta, Jose P.

    1989-01-01

    It is of a great importance to identify accurately the real peak potential (or simply, KVp) applied to a X-ray tube purposed to medical diagnosis, since it defines the beam energetic quality in terms of photons penetration power. Mainly in mammographic systems. it is of fundamental relevance the KVp accurate measurement because the soft tissues involved in this kind of examination provides different absorption - and, hence, clear contrast on mammographic film - just in a very restrict energetic range. Thus a device to measure KVp with adequate accuracy in mammographic units, using the basic principles of scintillation detection, was developed. This system is therefore composed of a NaI(Tl) crystal which is a X-ray sensor - replacing radiographic films which usually are a source of errors in these measurements - , a photo multiplier tube and changed into amplified electric pulses. Finally the electronic circuit, after adequate pulses treatment, shows instantaneously the actual KVp value in the test on displays. (author)

  19. Structural characterization of complex systems by applying a combination of scattering and spectroscopic methods

    International Nuclear Information System (INIS)

    Klose, G.

    1999-01-01

    Lyotropic mesophases possess lattice dimensions of the order of magnitude of the length of their molecules. Consequently, the first Bragg reflections of such systems appear at small scattering angles (small angle scattering). A combination of scattering and NMR methods was applied to study structural properties of POPC/C 12 E n mixtures. Generally, the ranges of existence of the liquid crystalline lamellar phase, the dimension of the unit-cell of the lamellae and important structural parameters of the lipid and surfactant molecules in the mixed bilayers were determined. With that the POPC/C 12 E 4 bilayer represents one of the best structurally characterized mixed model membranes. It is a good starting system for studying the interrelation with other e.g. dynamic or thermodynamic properties. (K.A.)

  20. Constraints to applying systems thinking concepts in health systems: A regional perspective from surveying stakeholders in Eastern Mediterranean countries.

    Science.gov (United States)

    El-Jardali, Fadi; Adam, Taghreed; Ataya, Nour; Jamal, Diana; Jaafar, Maha

    2014-12-01

    Systems Thinking (ST) has recently been promoted as an important approach to health systems strengthening. However, ST is not common practice, particularly in Low- and Middle-Income Countries (LMICs). This paper seeks to explore the barriers that may hinder its application in the Eastern Mediterranean Region (EMR) and possible strategies to mitigate them. A survey consisting of open-ended questions was conducted with a purposive sample of health policy-makers such as senior officials from the Ministry of Health (MoH), researchers, and other stakeholders such as civil society groups and professional associations from ten countries in the region. A total of 62 respondents participated in the study. Thematic analysis was conducted. There was strong recognition of the relevance and usefulness of ST to health systems policy-making and research, although misconceptions about what ST means were also identified. Experience with applying ST was very limited. Approaches to designing health policies in the EMR were perceived as reactive and fragmented (66%). Commonly perceived constraints to application of ST were: a perceived notion of its costliness combined with lack of the necessary funding to operationalize it (53%), competing political interests and lack of government accountability (50%), lack of awareness about relevance and value (47%), limited capacity to apply it (45%), and difficulty in coordinating and managing stakeholders (39%). While several strategies have been proposed to mitigate most of these constraints, they emphasized the importance of political endorsement and adoption of ST at the leadership level, together with building the necessary capacity to apply it and apply the learning in research and practice.

  1. IMPORTANCE OF INTEGRATED MANAGEMENT SYSTEM APPLIED IN HEALTH ESTABLISHMENTS IN ORDER TO RAISE TREATMENT QUALITY.

    Science.gov (United States)

    Dodić, Biljana; Miljković, Tatjana; Bjelobrk, Marija; Cemerlic Ađić, Nada; Ađić, Filip; Dodić, Slobodan

    2016-01-01

    The term "management" is best characterized as "managing" economic or social processes to achieve objectives through a rational use of material and immaterial resources by applying the principles, functions, and management methods. This study has been aimed at evaluating the value of an integrated quality management system implemented at the Institute of Cardiovascular Diseases of Vojvodina to improve the quality of treatment. In the period from 2008 to 2010 about 40 employees from the Institute of Cardiovascular Diseases of Vojvodina attended various courses given by the lecturers of the Faculty of Technical Sciences, where the function and significance of the "International Standards Organization" were explained, after which standards of interest were implemented at the Institute of Cardiovascular Diseases of Vojvodina. The Department of Cardiology has introduced 11 cardiac procedures with 5 special instructions, 14 general procedures, and 7 specific procedures with 2 instructions. The Department of Cardiac Surgery has introduced 7 procedures to be implemented. The "Vojvodina score" model was put into practice for the perioperative evaluation of cardiac surgery risk. During 2014, the Institute of Cardiovascular Diseases ofVojvodina obtained accreditation for the period of 7 years. The integrated quality management system must be applied in order to achieve a high level of health care in the shortest possible time and with the least possible consumption of material and human resources. The application of this system in practice gives a realistic insight into the working processes and facilitates their functioning. It demands and requires constant monitoring of the system efficiency along with continuous changes and improvements of all elements of the working processes and functional units.

  2. Electronic Health Record Systems and Intent to Apply for Meaningful Use Incentives among Office-based Physician ...

    Science.gov (United States)

    ... Order from the National Technical Information Service NCHS Electronic Health Record Systems and Intent to Apply for ... In 2011, 57% of office-based physicians used electronic medical record/electronic health record (EMR/EHR) systems, ...

  3. Induction of systemic resistance in plants by biochar, a soil-applied carbon sequestering agent.

    Science.gov (United States)

    Elad, Yigal; David, Dalia Rav; Harel, Yael Meller; Borenshtein, Menahem; Kalifa, Hananel Ben; Silber, Avner; Graber, Ellen R

    2010-09-01

    Biochar is the solid coproduct of biomass pyrolysis, a technique used for carbon-negative production of second-generation biofuels. The biochar can be applied as a soil amendment, where it permanently sequesters carbon from the atmosphere as well as improves soil tilth, nutrient retention, and crop productivity. In addition to its other benefits in soil, we found that soil-applied biochar induces systemic resistance to the foliar fungal pathogens Botrytis cinerea (gray mold) and Leveillula taurica (powdery mildew) on pepper and tomato and to the broad mite pest (Polyphagotarsonemus latus Banks) on pepper. Levels of 1 to 5% biochar in a soil and a coconut fiber-tuff potting medium were found to be significantly effective at suppressing both diseases in leaves of different ages. In long-term tests (105 days), pepper powdery mildew was significantly less severe in the biochar-treated plants than in the plants from the unamended controls although, during the final 25 days, the rate of disease development in the treatments and controls was similar. Possible biochar-related elicitors of systemic induced resistance are discussed.

  4. Applying Dynamical Systems Theory to Optimize Libration Point Orbit Stationkeeping Maneuvers for WIND

    Science.gov (United States)

    Brown, Jonathan M.; Petersen, Jeremy D.

    2014-01-01

    NASA's WIND mission has been operating in a large amplitude Lissajous orbit in the vicinity of the interior libration point of the Sun-Earth/Moon system since 2004. Regular stationkeeping maneuvers are required to maintain the orbit due to the instability around the collinear libration points. Historically these stationkeeping maneuvers have been performed by applying an incremental change in velocity, or (delta)v along the spacecraft-Sun vector as projected into the ecliptic plane. Previous studies have shown that the magnitude of libration point stationkeeping maneuvers can be minimized by applying the (delta)v in the direction of the local stable manifold found using dynamical systems theory. This paper presents the analysis of this new maneuver strategy which shows that the magnitude of stationkeeping maneuvers can be decreased by 5 to 25 percent, depending on the location in the orbit where the maneuver is performed. The implementation of the optimized maneuver method into operations is discussed and results are presented for the first two optimized stationkeeping maneuvers executed by WIND.

  5. 45 CFR 310.25 - What conditions apply to acquisitions of Computerized Tribal IV-D Systems?

    Science.gov (United States)

    2010-10-01

    ... FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Funding for Computerized Tribal IV-D Systems and Office Automation § 310.25 What conditions apply to... 45 Public Welfare 2 2010-10-01 2010-10-01 false What conditions apply to acquisitions of...

  6. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    Energy Technology Data Exchange (ETDEWEB)

    Vismari, Lucio Flavio, E-mail: lucio.vismari@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil); Batista Camargo Junior, Joao, E-mail: joaocamargo@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil)

    2011-07-15

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  7. Applying analytic hierarchy process to assess healthcare-oriented cloud computing service systems.

    Science.gov (United States)

    Liao, Wen-Hwa; Qiu, Wan-Li

    2016-01-01

    Numerous differences exist between the healthcare industry and other industries. Difficulties in the business operation of the healthcare industry have continually increased because of the volatility and importance of health care, changes to and requirements of health insurance policies, and the statuses of healthcare providers, which are typically considered not-for-profit organizations. Moreover, because of the financial risks associated with constant changes in healthcare payment methods and constantly evolving information technology, healthcare organizations must continually adjust their business operation objectives; therefore, cloud computing presents both a challenge and an opportunity. As a response to aging populations and the prevalence of the Internet in fast-paced contemporary societies, cloud computing can be used to facilitate the task of balancing the quality and costs of health care. To evaluate cloud computing service systems for use in health care, providing decision makers with a comprehensive assessment method for prioritizing decision-making factors is highly beneficial. Hence, this study applied the analytic hierarchy process, compared items related to cloud computing and health care, executed a questionnaire survey, and then classified the critical factors influencing healthcare cloud computing service systems on the basis of statistical analyses of the questionnaire results. The results indicate that the primary factor affecting the design or implementation of optimal cloud computing healthcare service systems is cost effectiveness, with the secondary factors being practical considerations such as software design and system architecture.

  8. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    International Nuclear Information System (INIS)

    Vismari, Lucio Flavio; Batista Camargo Junior, Joao

    2011-01-01

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  9. Understanding Interdependencies between Heterogeneous Earth Observation Systems When Applied to Federal Objectives

    Science.gov (United States)

    Gallo, J.; Sylak-Glassman, E.

    2017-12-01

    We will present a method for assessing interdependencies between heterogeneous Earth observation (EO) systems when applied to key Federal objectives. Using data from the National Earth Observation Assessment (EOA), we present a case study that examines the frequency that measurements from each of the Landsat 8 sensors are used in conjunction with heterogeneous measurements from other Earth observation sensors to develop data and information products. This EOA data allows us to map the most frequent interactions between Landsat measurements and measurements from other sensors, identify high-impact data and information products where these interdependencies occur, and identify where these combined measurements contribute most to meeting a key Federal objective within one of the 13 Societal Benefit Areas used in the EOA study. Using a value-tree framework to trace the application of data from EO systems to weighted key Federal objectives within the EOA study, we are able to estimate relative contribution of individual EO systems to meeting those objectives, as well as the interdependencies between measurements from all EO systems within the EOA study. The analysis relies on a modified Delphi method to elicit relative levels of reliance on individual measurements from EO systems, including combinations of measurements, from subject matter experts. This results in the identification of a representative portfolio of all EO systems used to meet key Federal objectives. Understanding the interdependencies among a heterogeneous set of measurements that modify the impact of any one individual measurement on meeting a key Federal objective, especially if the measurements originate from multiple agencies or state/local/tribal, international, academic, and commercial sources, can impact agency decision-making regarding mission requirements and inform understanding of user needs.

  10. Applying thermal neutron radiography to non-destructive assays of dynamic systems

    International Nuclear Information System (INIS)

    Silvani, Maria I.; Almeida, Gevaldo L. de; Goncalves, Marcelo J.; Lopes, Ricardo T.

    2008-01-01

    Dynamic processes or systems frequently can not have their behavior directly analyzed due to safety reasons or because they require destructive assays, which can not be always afforded when high-cost equipment, devices and components are involved. Under these circumstances, some kind of non-destructive technique should be applied to preserve the safety of the personnel performing the assay, as well as the integrity of the piece being inspected. Thermal neutrons are specially suited as a tool for this purpose, thanks to their capability to pass through metallic materials, which could be utterly opaque to X-rays. This paper describes the accomplishments achieved at the Instituto de Engenharia Nuclear / CNEN, Brazil, aiming at the development of an Image Acquisition System capable to perform non-destructive assays using thermal neutrons. It is comprised of a thermal neutron source provided by the Argonauta research reactor, a converter-scintillating screen, and a CCD-based video camera optically coupled to the screen through a dark chamber equipped with a mirror. The developed system has been used to acquire 2D neutron radiographic images of static devices to reveal their inner structure, as well as movies of running systems and working devices to verify its functioning and soundness. Radiographic images of objects taken at different angles would be later on used as projections to retrieve - through a proper unfolding software - their 3D images expressed as attenuation coefficients for thermal neutrons. A quantitative performance of the system has been assessed through its Modulation Transfer Function - MTF. In order to determine this curve, unique collimators designed to simulate different spatial frequencies have been manufactured. Besides that, images of some objects have been acquired with the system being developed as well as using the conventional radiographic film, allowing thus a qualitative comparison between them. (author)

  11. Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

    International Nuclear Information System (INIS)

    Kim, Taehee; Hwang, Sungjae; Park, Gangmin

    2013-01-01

    If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors

  12. An acceleration technique for the Gauss-Seidel method applied to symmetric linear systems

    Directory of Open Access Journals (Sweden)

    Jesús Cajigas

    2014-06-01

    Full Text Available A preconditioning technique to improve the convergence of the Gauss-Seidel method applied to symmetric linear systems while preserving symmetry is proposed. The preconditioner is of the form I + K and can be applied an arbitrary number of times. It is shown that under certain conditions the application of the preconditioner a finite number of steps reduces the matrix to a diagonal. A series of numerical experiments using matrices from spatial discretizations of partial differential equations demonstrates that both versions of the preconditioner, point and block version, exhibit lower iteration counts than its non-symmetric version. Resumen. Se propone una técnica de precondicionamiento para mejorar la convergencia del método Gauss-Seidel aplicado a sistemas lineales simétricos pero preservando simetría. El precondicionador es de la forma I + K y puede ser aplicado un número arbitrario de veces. Se demuestra que bajo ciertas condiciones la aplicación del precondicionador un número finito de pasos reduce la matriz del sistema precondicionado a una diagonal. Una serie de experimentos con matrices que provienen de la discretización de ecuaciones en derivadas parciales muestra que ambas versiones del precondicionador, por punto y por bloque, muestran un menor número de iteraciones en comparación con la versión que no preserva simetría.

  13. Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taehee; Hwang, Sungjae; Park, Gangmin [POSCO Nuclear Technology, Seoul (Korea, Republic of)

    2013-05-15

    If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors.

  14. The Failure Envelope Concept Applied To The Bone-Dental Implant System.

    Science.gov (United States)

    Korabi, R; Shemtov-Yona, K; Dorogoy, A; Rittel, D

    2017-05-17

    Dental implants interact with the jawbone through their common interface. While the implant is an inert structure, the jawbone is a living one that reacts to mechanical stimuli. Setting aside mechanical failure considerations of the implant, the bone is the main component to be addressed. With most failure criteria being expressed in terms of stress or strain values, their fulfillment can mean structural flow or fracture. However, in addition to those effects, the bony structure is likely to react biologically to the applied loads by dissolution or remodeling, so that additional (strain-based) criteria must be taken into account. While the literature abounds in studies of particular loading configurations, e.g. angle and value of the applied load to the implant, a general study of the admissible implant loads is still missing. This paper introduces the concept of failure envelopes for the dental implant-jawbone system, thereby defining admissible combinations of vertical and lateral loads for various failure criteria of the jawbone. Those envelopes are compared in terms of conservatism, thereby providing a systematic comparison of the various failure criteria and their determination of the admissible loads.

  15. Analysis of combustion turbine inlet air cooling systems applied to an operating cogeneration power plant

    International Nuclear Information System (INIS)

    Chacartegui, R.; Jimenez-Espadafor, F.; Sanchez, D.; Sanchez, T.

    2008-01-01

    In this work, combustion turbine inlet air cooling (CTIAC) systems are analyzed from an economic outlook, their effects on the global performance parameters and the economic results of the power plant. The study has been carried out on a combined cogeneration system, composed of a General Electric PG 6541 gas turbine and a heat recovery steam generator. The work has been divided into three parts. First, a revision of the present CTIAC technologies is shown, their effects on power plant performance and evaluation of the associated investment and maintenance costs. In a second phase of the work, the cogeneration plant was modelled with the objective of evaluating the power increase and the effects on the generated steam and the thermal oil. The cogeneration power plant model was developed, departing from the recorded operational data of the plant in 2005 and the gas turbine model offered by General Electric, to take into consideration that, in 2000, the gas turbine had been remodelled and the original performance curves should be corrected. The final objective of this model was to express the power plant main variables as a function of the gas turbine intake temperature, pressure and relative humidity. Finally, this model was applied to analyze the economic interest of different intake cooling systems, in different operative ranges and with different cooling capacities

  16. A review of fault tolerant control strategies applied to proton exchange membrane fuel cell systems

    Science.gov (United States)

    Dijoux, Etienne; Steiner, Nadia Yousfi; Benne, Michel; Péra, Marie-Cécile; Pérez, Brigitte Grondin

    2017-08-01

    Fuel cells are powerful systems for power generation. They have a good efficiency and do not generate greenhouse gases. This technology involves a lot of scientific fields, which leads to the appearance of strongly inter-dependent parameters. This makes the system particularly hard to control and increases fault's occurrence frequency. These two issues call for the necessity to maintain the system performance at the expected level, even in faulty operating conditions. It is called "fault tolerant control" (FTC). The present paper aims to give the state of the art of FTC applied to the proton exchange membrane fuel cell (PEMFC). The FTC approach is composed of two parts. First, a diagnosis part allows the identification and the isolation of a fault; it requires a good a priori knowledge of all the possible faults. Then, a control part allows an optimal control strategy to find the best operating point to recover/mitigate the fault; it requires the knowledge of the degradation phenomena and their mitigation strategies.

  17. Air pollution simulation and geographical information systems (GIS) applied to Athens International Airport.

    Science.gov (United States)

    Theophanides, Mike; Anastassopoulou, Jane

    2009-07-01

    This study presents an improved methodology for analysing atmospheric pollution around airports using Gaussian-plume numerical simulation integrated with Geographical Information Systems (GIS). The new methodology focuses on streamlining the lengthy analysis process for Airport Environmental Impact Assessments by integrating the definition of emission sources, simulating and displaying the results in a GIS environment. One of the objectives of the research is to validate the methodology applied to the Athens International Airport, "Eleftherios Venizelos", to produce a realistic estimate of emission inventories, dispersion simulations and comparison to measured data. The methodology used a combination of the Emission Dispersion and Modelling System (EDMS) and the Atmospheric Dispersion and Modelling system (ADMS) to improve the analysis process. The second objective is to conduct numerical simulations under various adverse conditions (e.g. scenarios) and assess the dispersion in the surrounding areas. The study concludes that the use of GIS in environmental assessments provides a valuable advantage for organizing data and entering accurate geographical/topological information for the simulation engine. Emissions simulation produced estimates within 10% of published values. Dispersion simulations indicate that airport pollution will affect neighbouring cities such as Rafina and Loutsa. Presently, there are no measured controls in these areas. In some cases, airport pollution can contribute to as much as 40% of permissible EU levels in VOCs.

  18. A Nonlinear Multiparameters Temperature Error Modeling and Compensation of POS Applied in Airborne Remote Sensing System

    Directory of Open Access Journals (Sweden)

    Jianli Li

    2014-01-01

    Full Text Available The position and orientation system (POS is a key equipment for airborne remote sensing systems, which provides high-precision position, velocity, and attitude information for various imaging payloads. Temperature error is the main source that affects the precision of POS. Traditional temperature error model is single temperature parameter linear function, which is not sufficient for the higher accuracy requirement of POS. The traditional compensation method based on neural network faces great problem in the repeatability error under different temperature conditions. In order to improve the precision and generalization ability of the temperature error compensation for POS, a nonlinear multiparameters temperature error modeling and compensation method based on Bayesian regularization neural network was proposed. The temperature error of POS was analyzed and a nonlinear multiparameters model was established. Bayesian regularization method was used as the evaluation criterion, which further optimized the coefficients of the temperature error. The experimental results show that the proposed method can improve temperature environmental adaptability and precision. The developed POS had been successfully applied in airborne TSMFTIS remote sensing system for the first time, which improved the accuracy of the reconstructed spectrum by 47.99%.

  19. A Pilot Study on Applying Risk Informed Application Option 2 to Two Systems in UCN 3

    International Nuclear Information System (INIS)

    Kim, Kil Yoo; Hwang, Mee Jeong; Yang, Joon Eon

    2005-01-01

    To reduce the unnecessary burden of a regulation, NRC prepared three options for the risk informed regulatory framework known as Option 1, Option 2 and Option 3. In Option 2, all safety related Structure, System and Components (SSCs) and non-safety related SSCs are evaluated from a safety point of view, and the low safety significant SSCs belonging to the safety related group are called 'Risk Informed Safety Class (RISC) - 3' SSCs. The 'RISC-3' SSCs can be exempted from the special treatment requirements such as a seismic and environmental requirement, of 10 CFR 50. For Option 2, 10 CFR 50.69 was issued by US NRC, and NEI 00-04 was prepared by US industry as a categorization guideline for 10 CFR 50.69, and US NRC endorsed the NEI 00-04 methodology for Option 2 in Reg. Guide 1.201. This paper describes the Option 2 method applied to the high pressure safety injection system (HPSI) and the essential service water system (ESW) of UCN 3

  20. Human-machine interfaces based on EMG and EEG applied to robotic systems

    Directory of Open Access Journals (Sweden)

    Sarcinelli-Filho Mario

    2008-03-01

    Full Text Available Abstract Background Two different Human-Machine Interfaces (HMIs were developed, both based on electro-biological signals. One is based on the EMG signal and the other is based on the EEG signal. Two major features of such interfaces are their relatively simple data acquisition and processing systems, which need just a few hardware and software resources, so that they are, computationally and financially speaking, low cost solutions. Both interfaces were applied to robotic systems, and their performances are analyzed here. The EMG-based HMI was tested in a mobile robot, while the EEG-based HMI was tested in a mobile robot and a robotic manipulator as well. Results Experiments using the EMG-based HMI were carried out by eight individuals, who were asked to accomplish ten eye blinks with each eye, in order to test the eye blink detection algorithm. An average rightness rate of about 95% reached by individuals with the ability to blink both eyes allowed to conclude that the system could be used to command devices. Experiments with EEG consisted of inviting 25 people (some of them had suffered cases of meningitis and epilepsy to test the system. All of them managed to deal with the HMI in only one training session. Most of them learnt how to use such HMI in less than 15 minutes. The minimum and maximum training times observed were 3 and 50 minutes, respectively. Conclusion Such works are the initial parts of a system to help people with neuromotor diseases, including those with severe dysfunctions. The next steps are to convert a commercial wheelchair in an autonomous mobile vehicle; to implement the HMI onboard the autonomous wheelchair thus obtained to assist people with motor diseases, and to explore the potentiality of EEG signals, making the EEG-based HMI more robust and faster, aiming at using it to help individuals with severe motor dysfunctions.

  1. Stochastic Methods Applied to Power System Operations with Renewable Energy: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Z. [Argonne National Lab. (ANL), Argonne, IL (United States); Liu, C. [Argonne National Lab. (ANL), Argonne, IL (United States); Electric Reliability Council of Texas (ERCOT), Austin, TX (United States); Botterud, A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-08-01

    Renewable energy resources have been rapidly integrated into power systems in many parts of the world, contributing to a cleaner and more sustainable supply of electricity. Wind and solar resources also introduce new challenges for system operations and planning in terms of economics and reliability because of their variability and uncertainty. Operational strategies based on stochastic optimization have been developed recently to address these challenges. In general terms, these stochastic strategies either embed uncertainties into the scheduling formulations (e.g., the unit commitment [UC] problem) in probabilistic forms or develop more appropriate operating reserve strategies to take advantage of advanced forecasting techniques. Other approaches to address uncertainty are also proposed, where operational feasibility is ensured within an uncertainty set of forecasting intervals. In this report, a comprehensive review is conducted to present the state of the art through Spring 2015 in the area of stochastic methods applied to power system operations with high penetration of renewable energy. Chapters 1 and 2 give a brief introduction and overview of power system and electricity market operations, as well as the impact of renewable energy and how this impact is typically considered in modeling tools. Chapter 3 reviews relevant literature on operating reserves and specifically probabilistic methods to estimate the need for system reserve requirements. Chapter 4 looks at stochastic programming formulations of the UC and economic dispatch (ED) problems, highlighting benefits reported in the literature as well as recent industry developments. Chapter 5 briefly introduces alternative formulations of UC under uncertainty, such as robust, chance-constrained, and interval programming. Finally, in Chapter 6, we conclude with the main observations from our review and important directions for future work.

  2. Fault Detection Based on Tracking Differentiator Applied on the Suspension System of Maglev Train

    Directory of Open Access Journals (Sweden)

    Hehong Zhang

    2015-01-01

    Full Text Available A fault detection method based on the optimized tracking differentiator is introduced. It is applied on the acceleration sensor of the suspension system of maglev train. It detects the fault of the acceleration sensor by comparing the acceleration integral signal with the speed signal obtained by the optimized tracking differentiator. This paper optimizes the control variable when the states locate within or beyond the two-step reachable region to improve the performance of the approximate linear discrete tracking differentiator. Fault-tolerant control has been conducted by feedback based on the speed signal acquired from the optimized tracking differentiator when the acceleration sensor fails. The simulation and experiment results show the practical usefulness of the presented method.

  3. Sustainable solar home systems model: Applying lessons from Bangladesh to Myanmar's rural poor

    DEFF Research Database (Denmark)

    Newcombe, Alex; Ackom, Emmanuel

    2017-01-01

    Myanmar's rural population has very low access to electricity, mainly due to low disposal income and the remoteness of communities. This paper attempts to test the potential applicability of Grameen Shakti-Infrastructure Development Company Limited (IDCOL), which is a Bangladeshi public private...... partnership microfinance model, to rural Myanmar towards enhanced solar home systems (SHS) deployment. Rural poor are enabled by this microfinancing scheme to own SHSs in a few years for as low as US$6.40 per month. The objectives of this paper are to assess the experience of Grameen Shakti-IDCOL and other...... similar projects for invaluable lessons, identify barriers to sustainable electrification for Myanmar's rural poor and to apply these lessons learned to overcome barriers by developing policy recommendations for sustainable electrification for rural poor in Myanmar. Recommendations are provided suggesting...

  4. A G-function-based reliability-based design methodology applied to a cam roller system

    International Nuclear Information System (INIS)

    Wang, W.; Sui, P.; Wu, Y.T.

    1996-01-01

    Conventional reliability-based design optimization methods treats the reliability function as an ordinary function and applies existing mathematical programming techniques to solve the design problem. As a result, the conventional approach requires nested loops with respect to g-function, and is very time consuming. A new reliability-based design method is proposed in this paper that deals with the g-function directly instead of the reliability function. This approach has the potential of significantly reducing the number of calls for g-function calculations since it requires only one full reliability analysis in a design iteration. A cam roller system in a typical high pressure fuel injection diesel engine is designed using both the proposed and the conventional approach. The proposed method is much more efficient for this application

  5. Effects produced by oscillations applied to nonlinear dynamic systems: a general approach and examples

    DEFF Research Database (Denmark)

    Blekhman, I. I.; Sorokin, V. S.

    2016-01-01

    A general approach to study effects produced by oscillations applied to nonlinear dynamic systems is developed. It implies a transition from initial governing equations of motion to much more simple equations describing only the main slow component of motions (the vibro-transformed dynamics.......g., the requirement for the involved nonlinearities to be weak. The approach is illustrated by several relevant examples from various fields of science, e.g., mechanics, physics, chemistry and biophysics....... equations). The approach is named as the oscillatory strobodynamics, since motions are perceived as under a stroboscopic light. The vibro-transformed dynamics equations comprise terms that capture the averaged effect of oscillations. The method of direct separation of motions appears to be an efficient...

  6. Challenges in the implementation of a quality management system applied to radiometric analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Danila C.S.; Bonifacio, Rodrigo L.; Nascimento, Marcos R.L.; Silva, Nivaldo C. da; Taddei, Maria Helena T., E-mail: danilacdias@gmail.com [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

    2015-07-01

    The concept of quality in laboratories has been well established as an essential factor in the search for reliable results. Since its first version published (1999), the ISO/IEC 17025 has been applied in the industrial and research fields, in a wide range of laboratorial analyses. However, the implementation of a Quality Management System still poses great challenges to institutions and companies. The purpose of this work is to expose the constraints related to the implementation of ISO/IEC 17025 applied to analytical assays of radionuclides, accomplished by studying the case of the Pocos de Caldas Laboratory of the Brazilian Commission for Nuclear Energy. In this lab, a project of accreditation of techniques involving determination of radionuclides in water, soil, sediment and food samples has been conducted since 2011. The challenges presented by this project arise from the administrative view, where the governmental nature of the institution translates into unlevelled availability resources and the organizational view, whereas QMS requires inevitable changes in the organizational culture. It is important to point out that when it comes to accreditation of analysis involving radioactive elements, many aspects must be treated carefully due to the their very particular nature. Among these concerns are the determination of analysis uncertainties, accessibility to international proficiency studies, international radioactive samples and CRM transportation, the study of parameters on the validation of analytical methods and the lack of documentation and specialized personnel regarding quality at radiometric measurements. Through an effective management system, the institution is overcoming these challenges, moving toward the ISO/IEC 17025 accreditation. (author)

  7. Challenges in the implementation of a quality management system applied to radiometric analysis

    International Nuclear Information System (INIS)

    Dias, Danila C.S.; Bonifacio, Rodrigo L.; Nascimento, Marcos R.L.; Silva, Nivaldo C. da; Taddei, Maria Helena T.

    2015-01-01

    The concept of quality in laboratories has been well established as an essential factor in the search for reliable results. Since its first version published (1999), the ISO/IEC 17025 has been applied in the industrial and research fields, in a wide range of laboratorial analyses. However, the implementation of a Quality Management System still poses great challenges to institutions and companies. The purpose of this work is to expose the constraints related to the implementation of ISO/IEC 17025 applied to analytical assays of radionuclides, accomplished by studying the case of the Pocos de Caldas Laboratory of the Brazilian Commission for Nuclear Energy. In this lab, a project of accreditation of techniques involving determination of radionuclides in water, soil, sediment and food samples has been conducted since 2011. The challenges presented by this project arise from the administrative view, where the governmental nature of the institution translates into unlevelled availability resources and the organizational view, whereas QMS requires inevitable changes in the organizational culture. It is important to point out that when it comes to accreditation of analysis involving radioactive elements, many aspects must be treated carefully due to the their very particular nature. Among these concerns are the determination of analysis uncertainties, accessibility to international proficiency studies, international radioactive samples and CRM transportation, the study of parameters on the validation of analytical methods and the lack of documentation and specialized personnel regarding quality at radiometric measurements. Through an effective management system, the institution is overcoming these challenges, moving toward the ISO/IEC 17025 accreditation. (author)

  8. Scoping literature review on the Learning Organisation concept as applied to the health system.

    Science.gov (United States)

    Akhnif, E; Macq, J; Idrissi Fakhreddine, M O; Meessen, B

    2017-03-01

    ᅟ: There is growing interest in the use of the management concept of a 'learning organisation'. The objective of this review is to explore work undertaken towards the application of this concept to the health sector in general and to reach the goal of universal health coverage in particular. Of interest are the exploration of evaluation frameworks and their application in health. We used a scoping literature review based on the York methodology. We conducted an online search using selected keywords on some of the main databases on health science, selected websites and main reference books on learning organisations. We restricted the focus of our search on sources in the English language only. Inclusive and exclusive criteria were applied to arrive at a final list of articles, from which information was extracted and then selected and inserted in a chart. We identified 263 articles and other documents from our search. From these, 50 articles were selected for a full analysis and 27 articles were used for the summary. The majority of the articles concerned hospital settings (15 articles, 55%). Seven articles (25%) were related to the application of the concept to the health centre setting. Four articles discussed the application of the concept to the health system (14%). Most of the applications involved high-income countries (21 articles, 78%), with only one article being related to a low-income country. We found 13 different frameworks that were applied to different health organisations. The scoping review allowed us to assess applications of the learning organisation concept to the health sector to date. Such applications are still rare, but are increasingly being used. There is no uniform framework thus far, but convergence as for the dimensions that matter is increasing. Many methodological questions remain unanswered. We also identified a gap in terms of the use of this concept in low- and middle-income countries and to the health system as a whole.

  9. Applied Electromagnetics

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, H; Marinova, I; Cingoski, V [eds.

    2002-07-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics.

  10. Applied Electromagnetics

    International Nuclear Information System (INIS)

    Yamashita, H.; Marinova, I.; Cingoski, V.

    2002-01-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics

  11. Applying systems biology to biomedical research and health care: a précising definition of systems medicine.

    Science.gov (United States)

    Schleidgen, Sebastian; Fernau, Sandra; Fleischer, Henrike; Schickhardt, Christoph; Oßa, Ann-Kristin; Winkler, Eva C

    2017-11-21

    Systems medicine has become a key word in biomedical research. Although it is often referred to as P4-(predictive, preventive, personalized and participatory)-medicine, it still lacks a clear definition and is open to interpretation. This conceptual lack of clarity complicates the scientific and public discourse on chances, risks and limits of Systems Medicine and may lead to unfounded hopes. Against this background, our goal was to develop a sufficiently precise and widely acceptable definition of Systems Medicine. In a first step, PubMed was searched using the keyword "systems medicine". A data extraction tabloid was developed putting forward a means/ends-division. Full-texts of articles containing Systems Medicine in title or abstract were screened for definitions. Definitions were extracted; their semantic elements were assigned as either means or ends. To reduce complexity of the resulting list, summary categories were developed inductively. In a second step, we applied six criteria for adequate definitions (necessity, non-circularity, non-redundancy, consistency, non-vagueness, and coherence) to these categories to derive a so-called précising definition of Systems Medicine. We identified 185 articles containing the term Systems Medicine in title or abstract. 67 contained at least one definition of Systems Medicine. In 98 definitions, we found 114 means and 132 ends. From these we derived the précising definition: Systems Medicine is an approach seeking to improve medical research (i.e. the understanding of complex processes occurring in diseases, pathologies and health states as well as innovative approaches to drug discovery) and health care (i.e. prevention, prediction, diagnosis and treatment) through stratification by means of Systems Biology (i.e. data integration, modeling, experimentation and bioinformatics). Our study also revealed the visionary character of Systems Medicine. Our insights, on the one hand, allow for a realistic identification of

  12. Modeling and Controlling Flow Transient in Pipeline Systems: Applied for Reservoir and Pump Systems Combined with Simple Surge Tank

    Directory of Open Access Journals (Sweden)

    Itissam ABUIZIAH

    2014-03-01

    Full Text Available When transient conditions (water hammer exist, the life expectancy of the system can be adversely impacted, resulting in pump and valve failures and catastrophic pipe rupture. Hence, transient control has become an essential requirement for ensuring safe operation of water pipeline systems. To protect the pipeline systems from transient effects, an accurate analysis and suitable protection devices should be used. This paper presents the problem of modeling and simulation of transient phenomena in hydraulic systems based on the characteristics method. Also, it provides the influence of using the protection devices to control the adverse effects due to excessive and low pressure occuring in the transient. We applied this model for two main pipeline systems: Valve and pump combined with a simple surge tank connected to reservoir. The results obtained by using this model indicate that the model is an efficient tool for water hammer analysis. Moreover, using a simple surge tank reduces the unfavorable effects of transients by reducing pressure fluctuations.

  13. A method for work modeling at complex systems: towards applying information systems in family health care units.

    Science.gov (United States)

    Jatobá, Alessandro; de Carvalho, Paulo Victor R; da Cunha, Amauri Marques

    2012-01-01

    Work in organizations requires a minimum level of consensus on the understanding of the practices performed. To adopt technological devices to support the activities in environments where work is complex, characterized by the interdependence among a large number of variables, understanding about how work is done not only takes an even greater importance, but also becomes a more difficult task. Therefore, this study aims to present a method for modeling of work in complex systems, which allows improving the knowledge about the way activities are performed where these activities do not simply happen by performing procedures. Uniting techniques of Cognitive Task Analysis with the concept of Work Process, this work seeks to provide a method capable of providing a detailed and accurate vision of how people perform their tasks, in order to apply information systems for supporting work in organizations.

  14. Conventional and advanced exergoeconomic analyses applied to ethylene refrigeration system of an existing olefin plant

    International Nuclear Information System (INIS)

    Palizdar, A.; Sadrameli, S.M.

    2017-01-01

    Highlights: • Conventional and advanced exergoeconomic analyses were applied. • Investment cost for most of the components is larger than exergy destruction cost. • Most of exergy destruction and investment costs are avoidable and endogenous. • Distillation column and compressor have the highest priority to improve. - Abstract: Ethylene refrigeration system of a light olefins production plant was investigated using the conventional and advanced exergoeconomic analyses. In advanced analysis, investment and exergy destruction costs of system components are divided into endogenous/exogenous and avoidable/unavoidable parts to improve our knowledge about the refrigeration system. Results of the exergoeconomic analysis represent that the total cost of column T-1 (1217.67 $/h), compressor C-3 (864.88 $/h), compressor C-2 (250.43 $/h) and multi stream heat exchanger MSHE-1 (154.19 $/h) are larger than other components. Results of the advanced exergoeconomic analysis reveal that most of the total costs of components are endogenous and can be reduced only for column T-1 and compressor C-3. With increasing the efficiency of these two components, investment and exergy destruction costs has been decreased (1381.74 $/h). Large amounts of endogenous exergy destruction cost of components represent that the interactions between the components are not a main reason for exergy destruction. Therefore, an appropriate strategy for the enhancement of the system efficiency and profitability is to improve their performance. Based on the above results, column T-1 and compressor C-3 have the highest priority to improve the performance. Sensitivity of the analysis parameters to some important operating variables have also been investigated.

  15. Applying e-procurement system in the healthcare: the EPOS paradigm

    Science.gov (United States)

    Ketikidis, Panayiotis H.; Kontogeorgis, Apostolos; Stalidis, George; Kaggelides, Kostis

    2010-03-01

    One of the goals of procurement is to establish a competitive price, while e-procurement utilises electronic commerce to identify potential sources of supply, to purchase goods and services, to exchange contractual information and to interact with suppliers. Extensive academic work has been extensively devoted to e-procurement in diverse industries. However, applying e-procurement in the healthcare sector remains unexplored. It lacks an efficient e-procurement mechanism that will enable hospitals and healthcare suppliers to electronically exchange contractual information, aided by the technologies of optimisation and business rules. The development and deployment of e-procurement requires a major effort in the coordination of complex interorganisational business process. This article presents an e-procurement optimised system (EPOS) for the healthcare marketplace, a complete methodological approach for deploying and operating such system, as piloted in public and private hospitals in three European countries (Greece, Spain and Belgium) and suppliers of healthcare items in the fourth country (Italy). The efficient e-procurement mechanism that EPOS suggests enables hospitals and pharmaceutical and medical equipment suppliers to electronically exchange contractual information.

  16. APPLYING CCD CAMERAS IN STEREO PANORAMA SYSTEMS FOR 3D ENVIRONMENT RECONSTRUCTION

    Directory of Open Access Journals (Sweden)

    A. Sh. Amini

    2012-07-01

    Full Text Available Proper recontruction of 3D environments is nowadays needed by many organizations and applications. In addition to conventional methods the use of stereo panoramas is an appropriate technique to use due to simplicity, low cost and the ability to view an environment the way it is in reality. This paper investigates the ability of applying stereo CCD cameras for 3D reconstruction and presentation of the environment and geometric measuring among that. For this purpose, a rotating stereo panorama was established using two CCDs with a base-length of 350 mm and a DVR (digital video recorder box. The stereo system was first calibrated using a 3D test-field and used to perform accurate measurements. The results of investigating the system in a real environment showed that although this kind of cameras produce noisy images and they do not have appropriate geometric stability, but they can be easily synchronized, well controlled and reasonable accuracy (about 40 mm in objects at 12 meters distance from the camera can be achieved.

  17. Characteristic analysis of the lower limb muscular strength training system applied with MR dampers.

    Science.gov (United States)

    Yu, Chang Ho; Piao, Young Jun; Kim, Kyung; Kwon, Tae Kyu

    2014-01-01

    A new training system that can adjust training intensity and indicate the center pressure of a subject was proposed by applying controlled electric current to the Magneto-Rheological damper. The experimental studying on the muscular activities were performed in lower extremities during maintaining and moving exercises, which were processed on an unstable platform with Magneto rheological dampers and recorded in a monitor. The electromyography (EMG) signals of the eight muscles in lower extremities were recorded and analyzed in certain time and frequency domain. Muscles researched in this paper were rectus femoris (RF), biceps femoris (BF), tensor fasciae latae (TFL), vastuslateralis (VL), vastusmedialis (VM), gastrocnemius (Ga), tibialis anterior (TA), and soleus (So). Differences of muscular activities during four moving exercises were studied in our experimental results. The rate of the increment of the muscular activities was affected by the condition of the unstable platform with MR dampers, which suggested the difference of moving exercises could selectively train each muscle with varying intensities. Furthermore, these findings also proposed that this training system can improve the ability of postural balance.

  18. Recovery in the soil-plant system of nitrogen from green manure applied on cabbage crop

    International Nuclear Information System (INIS)

    Araujo, Ednaldo da Silva; Guerra, Jose Guilherme Marinho; Espindola, Jose Antonio Azevedo; Urquiaga, Segundo; Boddey, Robert Michael; Alves, Bruno Jose Rodrigues; Martelleto, Luiz Aurelio Peres

    2011-01-01

    The objective of this work was to determine, in the soil-plant system, the recovery efficiency of N derived from green manure applied on cabbage (Brassica oleracea) crop. The experiment was divided into two stages: the first one consisted of the straw production of jack bean (Canavalia ensiformis), velvet bean (Mucuna cinereum), and sorghum (Sorghum bicolor), in substrate enriched with 15 N. The second stage consisted of the application of 15 N-labeled green manure on the cabbage beds. Treatments consisted of: fresh residues of jack bean; fresh residues of velvet bean; fresh residues of sorghum; mixture of residues of jack bean, velvet bean, and sorghum at 1:1:1; and control without green manure addition. The N recovery in the soil plant system was influenced by the green manure species used, and the recovery efficiency of the N derived from the green manure legumes varied from 9 to 16%. The jack bean treatment shows a greater recovery efficiency of nitrogen and, therefore, the best synchrony of N supply, by straw decomposition, with the cabbage crop demand. (author)

  19. Resonant-state expansion applied to three-dimensional open optical systems

    Science.gov (United States)

    Doost, M. Â. B.; Langbein, W.; Muljarov, E. Â. A.

    2014-07-01

    The resonant-state expansion (RSE), a rigorous perturbative method in electrodynamics, is developed for three-dimensional open optical systems. Results are presented using the analytically solvable homogeneous dielectric sphere as unperturbed system. Since any perturbation which breaks the spherical symmetry mixes transverse electric (TE) and transverse magnetic (TM) modes, the RSE is extended here to include TM modes and a zero-frequency pole of the Green's function. We demonstrate the validity of the RSE for TM modes by verifying its convergence towards the exact result for a homogeneous perturbation of the sphere. We then apply the RSE to calculate the modes for a selection of perturbations sequentially reducing the remaining symmetry, given by a change of the dielectric constant of half-sphere and quarter-sphere shape. Since no exact solutions are known for these perturbations, we verify the RSE results by comparing them with the results of state of the art finite element method (FEM) and finite difference in time domain (FDTD) solvers. We find that for the selected perturbations, the RSE provides a significantly higher accuracy than the FEM and FDTD for a given computational effort, demonstrating its potential to supersede presently used methods. We furthermore show that in contrast to presently used methods, the RSE is able to determine the perturbation of a selected group of modes by using a limited basis local to these modes, which can further reduce the computational effort by orders of magnitude.

  20. Geostatistics – a tool applied to the distribution of Legionella pneumophila in a hospital water system

    Directory of Open Access Journals (Sweden)

    Pasqualina Laganà

    2015-12-01

    Full Text Available [b]Introduction.[/b] Legionnaires’ disease is normally acquired by inhalation of legionellae from a contaminated environmental source. Water systems of large buildings, such as hospitals, are often contaminated with legionellae and therefore represent a potential risk for the hospital population. The aim of this study was to evaluate the potential contamination of [i]Legionella pneumophila[/i] (LP in a large hospital in Italy through georeferential statistical analysis to assess the possible sources of dispersion and, consequently, the risk of exposure for both health care staff and patients. [b]Materials and Method. [/b]LP serogroups 1 and 2–14 distribution was considered in the wards housed on two consecutive floors of the hospital building. On the basis of information provided by 53 bacteriological analysis, a ‘random’ grid of points was chosen and spatial geostatistics or [i]FAIk Kriging[/i] was applied and compared with the results of classical statistical analysis. [b]Results[/b]. Over 50% of the examined samples were positive for [i]Legionella pneumophila[/i]. LP 1 was isolated in 69% of samples from the ground floor and in 60% of sample from the first floor; LP 2–14 in 36% of sample from the ground floor and 24% from the first. The iso-estimation maps show clearly the most contaminated pipe and the difference in the diffusion of the different [i]L. pneumophila[/i] serogroups. [b]Conclusion.[/b] Experimental work has demonstrated that geostatistical methods applied to the microbiological analysis of water matrices allows a better modeling of the phenomenon under study, a greater potential for risk management and a greater choice of methods of prevention and environmental recovery to be put in place with respect to the classical statistical analysis.

  1. An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

    International Nuclear Information System (INIS)

    Nakae, Nobuo; Ozawa, Takayuki; Ohta, Hirokazu; Ogata, Takanari; Sekimoto, Hiroshi

    2014-01-01

    One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel

  2. An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nakae, Nobuo, E-mail: nakae-nobuo@jnes.go.jp [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Ozawa, Takayuki [Advanced Nuclear System Research and Development Directorate, Japan Atomic Energy Agency, 4-33, Muramatsu, Tokai-mura, Ibaraki-ken 319-1194 (Japan); Ohta, Hirokazu; Ogata, Takanari [Nuclear Technology Research Laboratory, Central Research Institute of Electric Power Industry, 2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511 (Japan); Sekimoto, Hiroshi [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

    2014-03-15

    One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel.

  3. A novel processed food classification system applied to Australian food composition databases.

    Science.gov (United States)

    O'Halloran, S A; Lacy, K E; Grimes, C A; Woods, J; Campbell, K J; Nowson, C A

    2017-08-01

    The extent of food processing can affect the nutritional quality of foodstuffs. Categorising foods by the level of processing emphasises the differences in nutritional quality between foods within the same food group and is likely useful for determining dietary processed food consumption. The present study aimed to categorise foods within Australian food composition databases according to the level of food processing using a processed food classification system, as well as assess the variation in the levels of processing within food groups. A processed foods classification system was applied to food and beverage items contained within Australian Food and Nutrient (AUSNUT) 2007 (n = 3874) and AUSNUT 2011-13 (n = 5740). The proportion of Minimally Processed (MP), Processed Culinary Ingredients (PCI) Processed (P) and Ultra Processed (ULP) by AUSNUT food group and the overall proportion of the four processed food categories across AUSNUT 2007 and AUSNUT 2011-13 were calculated. Across the food composition databases, the overall proportions of foods classified as MP, PCI, P and ULP were 27%, 3%, 26% and 44% for AUSNUT 2007 and 38%, 2%, 24% and 36% for AUSNUT 2011-13. Although there was wide variation in the classifications of food processing within the food groups, approximately one-third of foodstuffs were classified as ULP food items across both the 2007 and 2011-13 AUSNUT databases. This Australian processed food classification system will allow researchers to easily quantify the contribution of processed foods within the Australian food supply to assist in assessing the nutritional quality of the dietary intake of population groups. © 2017 The British Dietetic Association Ltd.

  4. 45 CFR 310.40 - What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D...

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D Systems and Office Automation? 310.40 Section 310.40... COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Accountability and Monitoring Procedures for...

  5. 25th International Conference on Industrial, Engineering & Other Applica- tions of Applied Intelligent Systems (IEA/AIE 2012)

    CERN Document Server

    Jiang, He; Ali, Moonis; Li, Mingchu; Modern Advances in Intelligent Systems and Tools

    2012-01-01

    Intelligent systems provide a platform to connect the research in artificial intelligence to real-world problem solving applications. Various intelligent systems have been developed to face real-world applications. This book discusses the modern advances in intelligent systems and the tools in applied artificial intelligence. It consists of twenty-three chapters authored by participants of the 25th International Conference on Industrial, Engineering & Other Applications of Applied Intelligent Systems (IEA/AIE 2012) which was held in Dalian, China. This book is divided into six parts, including Applied Intelligence, Cognitive Computing and Affective Computing, Data Mining and Intelligent Systems, Decision Support Systems, Machine Learning, and Natural Language Processing. Each part includes three to five chapters. In these chapters, many approaches, applications, restrictions, and discussions are presented. The material of each chapter is self-contained and was reviewed by at least two anonymous referees t...

  6. Applying Toyota Production System principles to a psychiatric hospital: making transfers safer and more timely.

    Science.gov (United States)

    Young, John Q; Wachter, Robert M

    2009-09-01

    Health care organizations have increasingly embraced industrial methods, such as the Toyota Production System (TPS), to improve quality, safety, timeliness, and efficiency. However, the use of such methods in psychiatric hospitals has been limited. A psychiatric hospital applied TPS principles to patient transfers to the outpatient medication management clinics (MMCs) from all other inpatient and outpatient services within the hospital's system. Sources of error and delay were identified, and a new process was designed to improve timely access (measured by elapsed time from request for transfer to scheduling of an appointment and to the actual visit) and patient safety by decreasing communication errors (measured by number of failed transfers). Complexity was substantially reduced, with one streamlined pathway replacing five distinct and more complicated pathways. To assess sustainability, the postintervention period was divided into Period 1 (first 12 months) and Period 2 (next 24 months). Time required to process the transfer and schedule the first appointment was reduced by 74.1% in Period 1 (p < .001) and by an additional 52.7% in Period 2 (p < .0001) for an overall reduction of 87% (p < .0001). Similarly, time to the actual appointment was reduced 31.2% in Period 1 (p < .0001), but was stable in Period 2 (p = .48). The number of transfers per month successfully processed and scheduled increased 95% in the postintervention period compared with the pre-implementation period (p = .015). Finally, data for failed transfers were only available for the postintervention period, and the rate decreased 89% in Period 2 compared with Period 1 (p = .017). The application of TPS principles enhanced access and safety through marked and sustained improvements in the transfer process's timeliness and reliability. Almost all transfer processes have now been standardized.

  7. Regional LLRW processing alternatives applying the DOE REGINALT systems analysis model

    International Nuclear Information System (INIS)

    Beers, G.H.

    1987-01-01

    The DOE Low-Level Waste Management Program has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternatives. Using waste from a typical regional compact, two specific regional waste processing centers are compared for feasibility. Example 1 assumes that a regional supercompaction facility is being developed for the region. Example 2 assumes that a regional facility with both supercompaction and incineration is specified. Both examples include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples are compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cycle costs per generated unit waste. A base case also illustrates current disposal practices. The results of the comparisons evaluated, and other steps, if necessary, for additional decision support are identified

  8. Applying cognitive load theory to the redesign of a conventional database systems course

    Science.gov (United States)

    Mason, Raina; Seton, Carolyn; Cooper, Graham

    2016-01-01

    Cognitive load theory (CLT) was used to redesign a Database Systems course for Information Technology students. The redesign was intended to address poor student performance and low satisfaction, and to provide a more relevant foundation in database design and use for subsequent studies and industry. The original course followed the conventional structure for a database course, covering database design first, then database development. Analysis showed the conventional course content was appropriate but the instructional materials used were too complex, especially for novice students. The redesign of instructional materials applied CLT to remove split attention and redundancy effects, to provide suitable worked examples and sub-goals, and included an extensive re-sequencing of content. The approach was primarily directed towards mid- to lower performing students and results showed a significant improvement for this cohort with the exam failure rate reducing by 34% after the redesign on identical final exams. Student satisfaction also increased and feedback from subsequent study was very positive. The application of CLT to the design of instructional materials is discussed for delivery of technical courses.

  9. Wet snow hazard for power lines: a forecast and alert system applied in Italy

    Directory of Open Access Journals (Sweden)

    P. Bonelli

    2011-09-01

    Full Text Available Wet snow icing accretion on power lines is a real problem in Italy, causing failures on high and medium voltage power supplies during the cold season. The phenomenon is a process in which many large and local scale variables contribute in a complex way and not completely understood. A numerical weather forecast can be used to select areas where wet snow accretion has an high probability of occurring, but a specific accretion model must also be used to estimate the load of an ice sleeve and its hazard. All the information must be carefully selected and shown to the electric grid operator in order to warn him promptly.

    The authors describe a prototype of forecast and alert system, WOLF (Wet snow Overload aLert and Forecast, developed and applied in Italy. The prototype elaborates the output of a numerical weather prediction model, as temperature, precipitation, wind intensity and direction, to determine the areas of potential risk for the power lines. Then an accretion model computes the ice sleeves' load for different conductor diameters. The highest values are selected and displayed on a WEB-GIS application principally devoted to the electric operator, but also to more expert users. Some experimental field campaigns have been conducted to better parameterize the accretion model. Comparisons between real accidents and forecasted icing conditions are presented and discussed.

  10. Wet snow hazard for power lines: a forecast and alert system applied in Italy

    Science.gov (United States)

    Bonelli, P.; Lacavalla, M.; Marcacci, P.; Mariani, G.; Stella, G.

    2011-09-01

    Wet snow icing accretion on power lines is a real problem in Italy, causing failures on high and medium voltage power supplies during the cold season. The phenomenon is a process in which many large and local scale variables contribute in a complex way and not completely understood. A numerical weather forecast can be used to select areas where wet snow accretion has an high probability of occurring, but a specific accretion model must also be used to estimate the load of an ice sleeve and its hazard. All the information must be carefully selected and shown to the electric grid operator in order to warn him promptly. The authors describe a prototype of forecast and alert system, WOLF (Wet snow Overload aLert and Forecast), developed and applied in Italy. The prototype elaborates the output of a numerical weather prediction model, as temperature, precipitation, wind intensity and direction, to determine the areas of potential risk for the power lines. Then an accretion model computes the ice sleeves' load for different conductor diameters. The highest values are selected and displayed on a WEB-GIS application principally devoted to the electric operator, but also to more expert users. Some experimental field campaigns have been conducted to better parameterize the accretion model. Comparisons between real accidents and forecasted icing conditions are presented and discussed.

  11. Regional LLRW [low-level radioactive waste] processing alternatives applying the DOE REGINALT systems analysis model

    International Nuclear Information System (INIS)

    Beers, G.H.

    1987-01-01

    The DOE Low-Level Waste Management Progam has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to a hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternaties. Using waste from a typical regional compact, two specific regional waste processing centers will be compared for feasibility. Example 1 will assume will assume that a regional supercompaction facility is being developed for the region. Example 2 will assume that a regional facility with both supercompation and incineration is specified. Both examples will include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples will be compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cylcle costs per generated unit waste. A base case will also illustrate current disposal practices. The results of the comparisons will be evaluated, and other steps, if necessary, for additional decision support will be identified

  12. Polymer-based Drug Delivery Systems Applied to Insects Repellents Devices: A Review.

    Science.gov (United States)

    Barradas, Thaís Nogueira; Senna, Juliana Perdiz; Ricci, Eduardo; Mansur, Claudia Regina Elias

    2016-01-01

    Insects-borne diseases constitute a public health concern. Since there is no vaccine or curative treatment for many of these diseases, individual protection is the main approach to prevent them. Nowadays, the search for replacing synthetic molecules for insect repellents from natural sources, such as essential oils, is increasing. However, most of them present low efficiency compared to synthetic repellents. Therefore, decreasing skin permeation of synthetic repellents or yet, increasing effectiveness of natural repellents are challenges that must be overcome during the development of novel insect repellent formulations. In this context, polymer-based formulations allow entrapping active ingredients and provide release control. Encapsulation into polymeric micro/nanocapsules, cyclodextrins, polymeric micelles or hydrogels constitutes an approach to modify physicochemical properties of encapsulated molecules. Such techniques, applied in topical formulations, fabrics modification for personal protection, or food packaging have proved to be more effective in increasing repellency time and also in reducing drug dermal absorption, improving safety profiles of these products. In this work, the main synthetic and natural insect repellents are described as well as their polymeric carrier systems and their potential applications.

  13. Toward a Blended Ontology: Applying Knowledge Systems to Compare Therapeutic and Toxicological Nanoscale Domains

    Directory of Open Access Journals (Sweden)

    Christopher M. Grulke

    2012-01-01

    Full Text Available Bionanomedicine and environmental research share need common terms and ontologies. This study applied knowledge systems, data mining, and bibliometrics used in nano-scale ADME research from 1991 to 2011. The prominence of nano-ADME in environmental research began to exceed the publication rate in medical research in 2006. That trend appears to continue as a result of the growing products in commerce using nanotechnology, that is, 5-fold growth in number of countries with nanomaterials research centers. Funding for this research virtually did not exist prior to 2002, whereas today both medical and environmental research is funded globally. Key nanoparticle research began with pharmacology and therapeutic drug-delivery and contrasting agents, but the advances have found utility in the environmental research community. As evidence ultrafine aerosols and aquatic colloids research increased 6-fold, indicating a new emphasis on environmental nanotoxicology. User-directed expert elicitation from the engineering and chemical/ADME domains can be combined with appropriate Boolean logic and queries to define the corpus of nanoparticle interest. The study combined pharmacological expertise and informatics to identify the corpus by building logical conclusions and observations. Publication records informatics can lead to an enhanced understanding the connectivity between fields, as well as overcoming the differences in ontology between the fields.

  14. Examples of New Models Applied in Selected Simulation Systems with Respect to Database

    Directory of Open Access Journals (Sweden)

    Ignaszak Z.

    2013-03-01

    Full Text Available The tolerance of damage rule progressively meets the approval in the design casting parts procedures. Therefore, there were appeared the new challenges and expectations for permanent development of process virtualization in the mechanical engineering industry. Virtualization is increasingly developed on the stage of product design and materials technologies optimization. Increasing expectations of design and process engineers regarding the practical effectiveness of applied simulation systems with new proposed up-grades modules is observed. The purpose is to obtain simulation tools allowing the most possible realistic prognosis of the casting structure, including indication, with the highest possible probability, places in the casting that are endangered with the possibility of shrinkage- and gas porosity formation. This 3D map of discontinuities and structure transformed in local mechanical characteristics are used to calculate the local stresses and safety factors. The needs of tolerance of damage and new approach to evaluate the quality of such prognosis must be defined. These problems of validation of new models/modules used to predict the shrinkage- and gas porosity including the chosen structure parameters in the example of AlSi7 alloy are discussed in the paper.

  15. Examples of New Models Applied in Selected Simulation Systems with Respect to Database

    Directory of Open Access Journals (Sweden)

    Z. Ignaszak

    2013-01-01

    Full Text Available The tolerance of damage rule progressively meets the approval in the design casting parts procedures. Therefore, there were appeared thenew challenges and expectations for permanent development of process virtualization in the mechanical engineering industry.Virtualization is increasingly developed on the stage of product design and materials technologies optimization. Increasing expectations of design and process engineers regarding the practical effectiveness of applied simulation systems with new proposed up-grades modules is observed. The purpose is to obtain simulation tools allowing the most possible realistic prognosis of the casting structure, including indication, with the highest possible probability, places in the casting that are endangered with the possibility of shrinkage– and gas porosity formation. This 3D map of discontinuities and structure transformed in local mechanical characteristics are used to calculate the local stresses and safety factors. The needs of tolerance of damage and new approach to evaluate the quality of such prognosis must be defined. These problems of validation of new models/modules used to predict the shrinkage– and gas porosity including the chosen structure parameters in the example of AlSi7 alloy are discussed in the paper.

  16. Isolation systems influence in the seismic loading propagation analysis applied to an innovative near term reactor

    International Nuclear Information System (INIS)

    Lo Frano, R.; Forasassi, G.

    2010-01-01

    Integrity of a Nuclear Power Plant (NPP) must be ensured during the plant life in any design condition and, particularly, in the event of a severe earthquake. To investigate the seismic resistance capability of as-built structures systems and components, in the event of a Safe Shutdown Earthquake (SSE), and analyse its related effects on a near term deployment reactor and its internals, a deterministic methodological approach, based on the evaluation of the propagation of seismic waves along the structure, was applied considering, also, the use of innovative anti-seismic techniques. In this paper the attention is focused on the use and influence of seismic isolation technologies (e.g. isolators based on passive energy dissipation) that seem able to ensure the full integrity and operability of NPP structures, to enhance the seismic safety (improving the design of new NPPs and if possible, to retrofit existing facilities) and to attain a standardization plant design. To the purpose of this study a numerical assessment of dynamic response/behaviour of the structures was accomplished by means of the finite element approach and setting up, as accurately as possible, a representative three-dimensional model of mentioned NPP structures. The obtained results in terms of response spectra (carried out from both cases of isolated and not isolated seismic analyses) are herein presented and compared in order to highlight the isolation technique effectiveness.

  17. Noospheric vector of management applied to the system of higher professional education

    Directory of Open Access Journals (Sweden)

    Yulia A. Mishina

    2017-01-01

    Full Text Available The aim of the research is to substantiate the necessity, expediency of the wide use of the noospheric management approaches, and technologies applied to the system of higher professional education in modern conditions. The materials and methods. Information base of the research is formed, based on education laws in Ukraine, Russia and the Donetsk People’s Republic, educational standards of higher professional education, as well as publications of scientists on the subject matter under study. In the given research it was used such methods: textological, analysis, generalization and modeling. The results. In the research, it is comprehensively examined the concept of noosphere, analyzed the modern theories and concepts of its development in relation to the development of society, an integral part of which is the system of education. It is indicated that there is the relationship between the noosphere and management in general, and with modern system of education, in particular. The concept of noospheric education is introduced and studied its impact on holistic  development of personality. The comparative characteristic of the structure and levels of the educational system of Ukraine, the Russian Federation and the Donetsk People’s Republic is performed; the types of educational institutions of the abovementioned states are compared. The structure of educational institution of higher professional education is proposed as a socio-economic system, managed from the perspective of the concept of noospheric education. The factors of competitiveness of educational institution of the higher school from the point of view of noospheric management are considered. Special attention is given to the internal factor of competitiveness of educational institutions, such as the quality of student life, because this position, particularly from the point of view of noospheric management, has a significant influence on the rating among consumers. The

  18. Applied systems theory as a means for studying the function and dynamics of living space used for agro-silviculture

    Energy Technology Data Exchange (ETDEWEB)

    Grossmann, W D; Schneider, T W

    1980-09-01

    Applied systems theories are sensitive tools for analysing the functions and dynamics of agrosilvicultural systems. Major interactions within and between agrosilvicultural systems and the natural and socio-economic environment are represented by corresponding interactions within a hierarchy of system models. A new meta-criteria analysis quantifies the variables of agrosilvicultural systems and produces indicators for assessing the stability or instability of the whole system complex. Two highly disaggregated models predict growth and yield and analyse structure and floristic variation of forest systems.

  19. Model-Based Systems Engineering With the Architecture Analysis and Design Language (AADL) Applied to NASA Mission Operations

    Science.gov (United States)

    Munoz Fernandez, Michela Miche

    2014-01-01

    The potential of Model Model Systems Engineering (MBSE) using the Architecture Analysis and Design Language (AADL) applied to space systems will be described. AADL modeling is applicable to real-time embedded systems- the types of systems NASA builds. A case study with the Juno mission to Jupiter showcases how this work would enable future missions to benefit from using these models throughout their life cycle from design to flight operations.

  20. Applied & Computational MathematicsChallenges for the Design and Control of Dynamic Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D L; Burns, J A; Collis, S; Grosh, J; Jacobson, C A; Johansen, H; Mezic, I; Narayanan, S; Wetter, M

    2011-03-10

    The Energy Independence and Security Act of 2007 (EISA) was passed with the goal 'to move the United States toward greater energy independence and security.' Energy security and independence cannot be achieved unless the United States addresses the issue of energy consumption in the building sector and significantly reduces energy consumption in buildings. Commercial and residential buildings account for approximately 40% of the U.S. energy consumption and emit 50% of CO{sub 2} emissions in the U.S. which is more than twice the total energy consumption of the entire U.S. automobile and light truck fleet. A 50%-80% improvement in building energy efficiency in both new construction and in retrofitting existing buildings could significantly reduce U.S. energy consumption and mitigate climate change. Reaching these aggressive building efficiency goals will not happen without significant Federal investments in areas of computational and mathematical sciences. Applied and computational mathematics are required to enable the development of algorithms and tools to design, control and optimize energy efficient buildings. The challenge has been issued by the U.S. Secretary of Energy, Dr. Steven Chu (emphasis added): 'We need to do more transformational research at DOE including computer design tools for commercial and residential buildings that enable reductions in energy consumption of up to 80 percent with investments that will pay for themselves in less than 10 years.' On July 8-9, 2010 a team of technical experts from industry, government and academia were assembled in Arlington, Virginia to identify the challenges associated with developing and deploying newcomputational methodologies and tools thatwill address building energy efficiency. These experts concluded that investments in fundamental applied and computational mathematics will be required to build enabling technology that can be used to realize the target of 80% reductions in energy

  1. Entropy criteria applied to pattern selection in systems with free boundaries

    Science.gov (United States)

    Kirkaldy, J. S.

    1985-10-01

    The steady state differential or integral equations which describe patterned dissipative structures, typically to be identified with first order phase transformation morphologies like isothermal pearlites, are invariably degenerate in one or more order parameters (the lamellar spacing in the pearlite case). It is often observed that a different pattern is attained at the steady state for each initial condition (the hysteresis or metastable case). Alternatively, boundary perturbations and internal fluctuations during transition up to, or at the steady state, destroy the path coherence. In this case a statistical ensemble of imperfect patterns often emerges which represents a fluctuating but recognizably patterned and unique average steady state. It is cases like cellular, lamellar pearlite, involving an assembly of individual cell patterns which are regularly perturbed by local fluctuation and growth processes, which concern us here. Such weakly fluctuating nonlinear steady state ensembles can be arranged in a thought experiment so as to evolve as subsystems linking two very large mass-energy reservoirs in isolation. Operating on this discontinuous thermodynamic ideal, Onsager’s principle of maximum path probability for isolated systems, which we interpret as a minimal time correlation function connecting subsystem and baths, identifies the stable steady state at a parametric minimum or maximum (or both) in the dissipation rate. This nonlinear principle is independent of the Principle of Minimum Dissipation which is applicable in the linear regime of irreversible thermodynamics. The statistical argument is equivalent to the weak requirement that the isolated system entropy as a function of time be differentiable to the second order despite the macroscopic pattern fluctuations which occur in the subsystem. This differentiability condition is taken for granted in classical stability theory based on the 2nd Law. The optimal principle as applied to isothermal and

  2. Estimation Methods for Infinite-Dimensional Systems Applied to the Hemodynamic Response in the Brain

    KAUST Repository

    Belkhatir, Zehor

    2018-05-01

    Infinite-Dimensional Systems (IDSs) which have been made possible by recent advances in mathematical and computational tools can be used to model complex real phenomena. However, due to physical, economic, or stringent non-invasive constraints on real systems, the underlying characteristics for mathematical models in general (and IDSs in particular) are often missing or subject to uncertainty. Therefore, developing efficient estimation techniques to extract missing pieces of information from available measurements is essential. The human brain is an example of IDSs with severe constraints on information collection from controlled experiments and invasive sensors. Investigating the intriguing modeling potential of the brain is, in fact, the main motivation for this work. Here, we will characterize the hemodynamic behavior of the brain using functional magnetic resonance imaging data. In this regard, we propose efficient estimation methods for two classes of IDSs, namely Partial Differential Equations (PDEs) and Fractional Differential Equations (FDEs). This work is divided into two parts. The first part addresses the joint estimation problem of the state, parameters, and input for a coupled second-order hyperbolic PDE and an infinite-dimensional ordinary differential equation using sampled-in-space measurements. Two estimation techniques are proposed: a Kalman-based algorithm that relies on a reduced finite-dimensional model of the IDS, and an infinite-dimensional adaptive estimator whose convergence proof is based on the Lyapunov approach. We study and discuss the identifiability of the unknown variables for both cases. The second part contributes to the development of estimation methods for FDEs where major challenges arise in estimating fractional differentiation orders and non-smooth pointwise inputs. First, we propose a fractional high-order sliding mode observer to jointly estimate the pseudo-state and input of commensurate FDEs. Second, we propose a

  3. Applying Augmented Reality to a Mobile-Assisted Learning System for Martial Arts Using Kinect Motion Capture

    Science.gov (United States)

    Hsu, Wen-Chun; Shih, Ju-Ling

    2016-01-01

    In this study, to learn the routine of Tantui, a branch of martial arts was taken as an object of research. Fitts' stages of motor learning and augmented reality (AR) were applied to a 3D mobile-assisted learning system for martial arts, which was characterized by free viewing angles. With the new system, learners could rotate the viewing angle of…

  4. Investigating the Impact of Carbon Tax to Power Generation in Java-Bali System by Applying Optimization Technique

    OpenAIRE

    Maxensius Tri Sambodo

    2010-01-01

    Java-Bali power system dominates the national installed capacity and will contribute to about 76% of the national CO2 emissions from the electricity sector in the future. Thus, minimizing CO2 emission from the Java-Bali system can help Indonesia to reduce the national CO2 emissions level. We apply optimization approach to investigate this problem by including carbon tax into the cost function. We analyzed data based on electricity generating system in 2008. In general the optimization showed ...

  5. Effects of emotional and perceptual-motor stress on a voice recognition system's accuracy: An applied investigation

    Science.gov (United States)

    Poock, G. K.; Martin, B. J.

    1984-02-01

    This was an applied investigation examining the ability of a speech recognition system to recognize speakers' inputs when the speakers were under different stress levels. Subjects were asked to speak to a voice recognition system under three conditions: (1) normal office environment, (2) emotional stress, and (3) perceptual-motor stress. Results indicate a definite relationship between voice recognition system performance and the type of low stress reference patterns used to achieve recognition.

  6. Preventing Control Constraint Violations by Use of Energy Balances for a Class of Coupled Systems: Applied to a Power Plant

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Stoustrup, Jakob

    2007-01-01

    recomputes the reference values to the system such that control signal constraint violations are avoided. The new reference values are found using an energy balance of the system. The scheme is intended to handle rarely occurring constraint violations, so the only concern is that the system should be stable...... and not to optimize performance during all conditions. The scheme is applied to an example with a coal mill pulverizing coal for a power plant.  ...

  7. Genetic algorithm applied to a Soil-Vegetation-Atmosphere system: Sensitivity and uncertainty analysis

    Science.gov (United States)

    Schneider, Sébastien; Jacques, Diederik; Mallants, Dirk

    2010-05-01

    Numerical models are of precious help for predicting water fluxes in the vadose zone and more specifically in Soil-Vegetation-Atmosphere (SVA) systems. For such simulations, robust models and representative soil hydraulic parameters are required. Calibration of unsaturated hydraulic properties is known to be a difficult optimization problem due to the high non-linearity of the water flow equations. Therefore, robust methods are needed to avoid the optimization process to lead to non-optimal parameters. Evolutionary algorithms and specifically genetic algorithms (GAs) are very well suited for those complex parameter optimization problems. Additionally, GAs offer the opportunity to assess the confidence in the hydraulic parameter estimations, because of the large number of model realizations. The SVA system in this study concerns a pine stand on a heterogeneous sandy soil (podzol) in the Campine region in the north of Belgium. Throughfall and other meteorological data and water contents at different soil depths have been recorded during one year at a daily time step in two lysimeters. The water table level, which is varying between 95 and 170 cm, has been recorded with intervals of 0.5 hour. The leaf area index was measured as well at some selected time moments during the year in order to evaluate the energy which reaches the soil and to deduce the potential evaporation. Water contents at several depths have been recorded. Based on the profile description, five soil layers have been distinguished in the podzol. Two models have been used for simulating water fluxes: (i) a mechanistic model, the HYDRUS-1D model, which solves the Richards' equation, and (ii) a compartmental model, which treats the soil profile as a bucket into which water flows until its maximum capacity is reached. A global sensitivity analysis (Morris' one-at-a-time sensitivity analysis) was run previously to the calibration, in order to check the sensitivity in the chosen parameter search space. For

  8. Applying a Qualitative Modeling Shell to Process Diagnosis: The Caster System. ONR Technical Report #16.

    Science.gov (United States)

    Thompson, Timothy F.; Clancey, William J.

    This report describes the application of a shell expert system from the medical diagnostic system, Neomycin, to Caster, a diagnostic system for malfunctions in industrial sandcasting. This system was developed to test the hypothesis that starting with a well-developed classification procedure and a relational language for stating the…

  9. From LCA to PSS – Making leaps towards sustainability by applying product/service-system thinking in product development

    DEFF Research Database (Denmark)

    Bey, Niki; McAloone, Timothy Charles

    2006-01-01

    for optimisations on all system levels. However, as the act of ecodesign conventionally focuses on physical products, the search for potential optimisations is usually directed ‘downwards’, i.e. towards lower system levels, resulting in optimised components within products rather than optimised products within...... their surrounding systems. This paper will exemplify that when broadening the ecodesign horizon to environmental product/service-system (PSS) design, there is a better possibility of applying a system-oriented life cycle thinking approach, and therefore a potential to yield extreme improvements towards...

  10. Decomposition with thermoeconomic isolation applied to the optimal synthesis/design and operation of an advanced tactical aircraft system

    International Nuclear Information System (INIS)

    Rancruel, Diego F.; Spakovsky, Michael R. von

    2006-01-01

    A decomposition methodology based on the concept of 'thermoeconomic isolation' and applied to the synthesis/design and operational optimization of an advanced tactical fighter aircraft is the focus of this paper. The total system is composed of six sub-systems of which five participate with degrees of freedom (493) in the optimization. They are the propulsion sub-system (PS), the environmental control sub-system (ECS), the fuel loop subsystem (FLS), the vapor compression and Polyalphaolefin (PAO) loops sub-system (VC/PAOS), and the airframe sub-system (AFS). The sixth subsystem comprises the expendable and permanent payloads as well as the equipment group. For each of the first five, detailed thermodynamic, geometric, physical, and aerodynamic models at both design and off-design were formulated and implemented. The most promising set of aircraft sub-system and system configurations were then determined based on both an energy integration and aerodynamic performance analysis at each stage of the mission (including the transient ones). Conceptual, time, and physical decomposition were subsequently applied to the synthesis/design and operational optimization of these aircraft configurations as well as to the highly dynamic process of heat generation and dissipation internal to the subsystems. The physical decomposition strategy used (i.e. Iterative Local-Global Optimization-ILGO) is the first to successfully closely approach the theoretical condition of 'thermoeconomic isolation' when applied to highly complex, highly dynamic non-linear systems. Developed at our Center for Energy Systems research, it has been effectively applied to a number of complex stationary and transportation applications

  11. Decomposition with thermoeconomic isolation applied to the optimal synthesis/design and operation of an advanced tactical aircraft system

    Energy Technology Data Exchange (ETDEWEB)

    Rancruel, Diego F. [Center for Energy Systems Research, Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24060 (United States); Spakovsky, Michael R. von [Center for Energy Systems Research, Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24060 (United States)]. E-mail: vonspako@vt.edu

    2006-12-15

    A decomposition methodology based on the concept of 'thermoeconomic isolation' and applied to the synthesis/design and operational optimization of an advanced tactical fighter aircraft is the focus of this paper. The total system is composed of six sub-systems of which five participate with degrees of freedom (493) in the optimization. They are the propulsion sub-system (PS), the environmental control sub-system (ECS), the fuel loop subsystem (FLS), the vapor compression and Polyalphaolefin (PAO) loops sub-system (VC/PAOS), and the airframe sub-system (AFS). The sixth subsystem comprises the expendable and permanent payloads as well as the equipment group. For each of the first five, detailed thermodynamic, geometric, physical, and aerodynamic models at both design and off-design were formulated and implemented. The most promising set of aircraft sub-system and system configurations were then determined based on both an energy integration and aerodynamic performance analysis at each stage of the mission (including the transient ones). Conceptual, time, and physical decomposition were subsequently applied to the synthesis/design and operational optimization of these aircraft configurations as well as to the highly dynamic process of heat generation and dissipation internal to the subsystems. The physical decomposition strategy used (i.e. Iterative Local-Global Optimization-ILGO) is the first to successfully closely approach the theoretical condition of 'thermoeconomic isolation' when applied to highly complex, highly dynamic non-linear systems. Developed at our Center for Energy Systems research, it has been effectively applied to a number of complex stationary and transportation applications.

  12. Applying formal method to design of nuclear power plant embedded protection system

    International Nuclear Information System (INIS)

    Kim, Jin Hyun; Kim, Il Gon; Sung, Chang Hoon; Choi, Jin Young; Lee, Na Young

    2001-01-01

    Nuclear power embedded protection systems is a typical safety-critical system, which detects its failure and shutdowns its operation of nuclear reactor. These systems are very dangerous so that it absolutely requires safety and reliability. Therefore nuclear power embedded protection system should fulfill verification and validation completely from the design stage. To develop embedded system, various V and V method have been provided and especially its design using Formal Method is studied in other advanced country. In this paper, we introduce design method of nuclear power embedded protection systems using various Formal-Method in various respect following nuclear power plant software development guideline

  13. The "Human Factor" in Pure and in Applied Mathematics. Systems Everywhere: Their Impact on Mathematics Education.

    Science.gov (United States)

    Fischer, Roland

    1992-01-01

    Discusses the impact that the relationship between people and mathematics could have on the development of pure and applied mathematics. Argues for (1) a growing interest in philosophy, history and sociology of science; (2) new models in educational and psychological research; and (3) a growing awareness of the human factor in technology,…

  14. Critical path method applied to research project planning: Fire Economics Evaluation System (FEES)

    Science.gov (United States)

    Earl B. Anderson; R. Stanton Hales

    1986-01-01

    The critical path method (CPM) of network analysis (a) depicts precedence among the many activities in a project by a network diagram; (b) identifies critical activities by calculating their starting, finishing, and float times; and (c) displays possible schedules by constructing time charts. CPM was applied to the development of the Forest Service's Fire...

  15. Applying the archetype approach to the database of a biobank information management system.

    Science.gov (United States)

    Späth, Melanie Bettina; Grimson, Jane

    2011-03-01

    The purpose of this study is to investigate the feasibility of applying the openEHR archetype approach to modelling the data in the database of an existing proprietary biobank information management system. A biobank information management system stores the clinical/phenotypic data of the sample donor and sample related information. The clinical/phenotypic data is potentially sourced from the donor's electronic health record (EHR). The study evaluates the reuse of openEHR archetypes that have been developed for the creation of an interoperable EHR in the context of biobanking, and proposes a new set of archetypes specifically for biobanks. The ultimate goal of the research is the development of an interoperable electronic biomedical research record (eBMRR) to support biomedical knowledge discovery. The database of the prostate cancer biobank of the Irish Prostate Cancer Research Consortium (PCRC), which supports the identification of novel biomarkers for prostate cancer, was taken as the basis for the modelling effort. First the database schema of the biobank was analyzed and reorganized into archetype-friendly concepts. Then, archetype repositories were searched for matching archetypes. Some existing archetypes were reused without change, some were modified or specialized, and new archetypes were developed where needed. The fields of the biobank database schema were then mapped to the elements in the archetypes. Finally, the archetypes were arranged into templates specifically to meet the requirements of the PCRC biobank. A set of 47 archetypes was found to cover all the concepts used in the biobank. Of these, 29 (62%) were reused without change, 6 were modified and/or extended, 1 was specialized, and 11 were newly defined. These archetypes were arranged into 8 templates specifically required for this biobank. A number of issues were encountered in this research. Some arose from the immaturity of the archetype approach, such as immature modelling support tools

  16. Environmental sustainability assessment of urban systems applying coupled urban metabolism and life cycle assessment

    DEFF Research Database (Denmark)

    Birkved, Morten; Goldstein, Benjamin Paul

    2013-01-01

    environmental sustainability of large urban systems by relating the environmental sustainability performance of urban systems with global environmental burden boundaries quantifying pollution thresholds beyond which performance of global ecosystems services may be detrimentally affected....

  17. Data-processing problems in filmless readout systems applied to physical experiments

    International Nuclear Information System (INIS)

    Bogdanova, N.B.; Prikhod'ko, V.I.; Ososkov, G.A.; Gadzhokov, V.

    1984-01-01

    The applications of filmless readout systems in modern physical experiments are considered. The basic characteristics of systems built on TV tubes and on charge-coupled devices (CCD) are reported. Filmless-data processing problems are formulated: recognition of images of tracks and fiducial marks; data compression; computation of the calibration transforms and of the system accuracy parameter. Results from mathematical algorithms and computer codes are reported for the case of streamer-chamber systems

  18. Applying Web Usage Mining for Personalizing Hyperlinks in Web-Based Adaptive Educational Systems

    Science.gov (United States)

    Romero, Cristobal; Ventura, Sebastian; Zafra, Amelia; de Bra, Paul

    2009-01-01

    Nowadays, the application of Web mining techniques in e-learning and Web-based adaptive educational systems is increasing exponentially. In this paper, we propose an advanced architecture for a personalization system to facilitate Web mining. A specific Web mining tool is developed and a recommender engine is integrated into the AHA! system in…

  19. Applying Structural Systems Thinking to Frame Perspectives on Social Work Innovation

    Science.gov (United States)

    Stringfellow, Erin J.

    2017-01-01

    Objective: Innovation will be key to the success of the Grand Challenges Initiative in social work. A structural systems framework based in system dynamics could be useful for considering how to advance innovation. Method: Diagrams using system dynamics conventions were developed to link common themes across concept papers written by social work…

  20. A survey of techniques applied to non-stationary waveforms in electrical power systems

    NARCIS (Netherlands)

    Rodrigues, R.P.; Silveira, P.M.; Ribeiro, P.F.

    2010-01-01

    The well-known and ever-present time-varying and non-stationary nature of waveforms in power systems requires a comprehensive and precise analytical basis that needs to be incorporated in the system studies and analyses. This time-varying behavior is due to continuous changes in system

  1. A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

    Science.gov (United States)

    Bailey, Brandon

    2016-01-01

    Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

  2. Dual technology energy storage system applied to two complementary electricity markets using a weekly differentiated approach

    NARCIS (Netherlands)

    Ferreira, H.L.; Staňková, K.; Peças Lopes, J.; Slootweg, J.G.; Kling, W.L.

    2017-01-01

    This paper deals with integration of energy storage systems into electricity markets. We explain why the energy storage systems increase flexibility of both power systems and energy markets and why such flexibility is desirable, particularly when variable renewable energy sources are being used in

  3. Systems identification: a theoretical method applied to tracer kinetics in aquatic microcosms

    International Nuclear Information System (INIS)

    Halfon, E.; Georgia Univ., Athens

    1974-01-01

    A mathematical model of radionuclide kinetics in a laboratory microcosm was built and the transfer parameters estimated by multiple regression and system identification techniques. Insight into the functioning of the system was obtained from analysis of the model. Methods employed have allowed movements of radioisotopes not directly observable in the experimental systems to be distinguished. Results are generalized to whole ecosystems

  4. Applied dynamics

    CERN Document Server

    Schiehlen, Werner

    2014-01-01

    Applied Dynamics is an important branch of engineering mechanics widely applied to mechanical and automotive engineering, aerospace and biomechanics as well as control engineering and mechatronics. The computational methods presented are based on common fundamentals. For this purpose analytical mechanics turns out to be very useful where D’Alembert’s principle in the Lagrangian formulation proves to be most efficient. The method of multibody systems, finite element systems and continuous systems are treated consistently. Thus, students get a much better understanding of dynamical phenomena, and engineers in design and development departments using computer codes may check the results more easily by choosing models of different complexity for vibration and stress analysis.

  5. Applying the principles of adult learning to the teaching of psychopharmacology: audience response systems.

    Science.gov (United States)

    Stahl, Stephen M; Davis, Richard L

    2009-08-01

    Medical presentations can be enhanced by systematically collecting audience feedback. This is readily accomplished with polling systems, called audience response systems. Several systems are now available that are small, inexpensive, and can be readily integrated into standard powerpoint presentations without the need for a technician. Use of audience response systems has several advantages. These include improving attentiveness, increasing learning, polling anonymously, tracking individual and group responses, gauging audience understanding, adding interactivity and fun, and evaluating both participant learning and instructor teaching. Tips for how to write questions for audience response systems are also included.

  6. Reliability analysis of reactor systems by applying probability method; Analiza pouzdanosti reaktorskih sistema primenom metoda verovatnoce

    Energy Technology Data Exchange (ETDEWEB)

    Milivojevic, S [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1974-12-15

    Probability method was chosen for analysing the reactor system reliability is considered realistic since it is based on verified experimental data. In fact this is a statistical method. The probability method developed takes into account the probability distribution of permitted levels of relevant parameters and their particular influence on the reliability of the system as a whole. The proposed method is rather general, and was used for problem of thermal safety analysis of reactor system. This analysis enables to analyze basic properties of the system under different operation conditions, expressed in form of probability they show the reliability of the system on the whole as well as reliability of each component.

  7. Contemporary approaches to control system specification and design applied to KAON

    International Nuclear Information System (INIS)

    Ludgate, G.A.; Osberg, E.A.; Dohan, D.A.

    1991-05-01

    Large data acquisition and control systems have evolved from early centralized computer systems to become multi-processor, distributed systems. While the complexity of these systems has increased our ability to reliably manage their construction has not kept pace. Structured analysis and real-time structured analysis have been used successfully to specify systems but, from a project management viewpoint, both lead to different classes of problems during implementation and maintenance. The KAON Factory central control system study employed a uniform approach to requirements analysis and architectural design. The methodology was based on well established object-oriented principles and was free of the problems inherent in the older methodologies. The methodology is presently being used to implement two systems at TRIUMF. (Author) 12 refs

  8. Systems thinking perspectives applied to healthcare transition for youth with disabilities: a paradigm shift for practice, policy and research.

    Science.gov (United States)

    Hamdani, Y; Jetha, A; Norman, C

    2011-11-01

    Healthcare transition (HCT) for youth with disabilities is a complex phenomenon influenced by multiple interacting factors, including health, personal and environmental factors. Current research on the transition to adulthood for disabled youth has primarily focused on identifying these multilevel factors to guide the development of interventions to improve the HCT process. However, little is known about how this complex array of factors interacts and contributes to successful HCT. Systems thinking provides a theoretically informed perspective that accounts for complexity and can contribute to enhanced understanding of the interactions among HCT factors. The objective of this paper is to introduce general concepts of systems thinking as applied to HCT practice and research. Several systems thinking concepts and principles are introduced and a discussion of HCT as a complex system is provided. Systems dynamics methodology is described as one systems method for conceptualizing HCT. A preliminary systems dynamics model is presented to facilitate discourse on the application of systems thinking principles to HCT practice, policy and research. An understanding of the complex interactions and patterns of relationships in HCT can assist health policy makers and practitioners in determining key areas of intervention, the impact of these interventions on the system and the potential intended and unintended consequences of change. This paper provides initial examination of applying systems thinking to inform future research and practice on HCT. © 2011 Blackwell Publishing Ltd.

  9. Study of fieldbus technology applied in a sterilization plant control and safety systems

    International Nuclear Information System (INIS)

    Karam Junior, Dib

    2000-01-01

    Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible application of that process, in 1960, also in the the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides new applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. The present work suggests, evaluates, qualifies and quantifies this possibility. (author)

  10. Selection of a turbine cooling system applying multi-disciplinary design considerations.

    Science.gov (United States)

    Glezer, B

    2001-05-01

    The presented paper describes a multi-disciplinary cooling selection approach applied to major gas turbine engine hot section components, including turbine nozzles, blades, discs, combustors and support structures, which maintain blade tip clearances. The paper demonstrates benefits of close interaction between participating disciplines starting from early phases of the hot section development. The approach targets advancements in engine performance and cost by optimizing the design process, often requiring compromises within individual disciplines.

  11. Abstract to Action: Targeted Learning System Theory Applied to Adaptive Flight Training

    Science.gov (United States)

    2018-04-18

    practitioner’s approach to transform abstract ideas into actionable options for the future of education and training. Using exploratory and applied design... transformation of pre-baccalaureate teacher education through a discussion of the efficacy of the Professional Development School model for experiential...to accomplish anything at all. To the Airmen of tomorrow: Thank you for believing in the power of education and training to help grow the

  12. Tutorial - applying extreme value theory to characterize food-processing systems

    DEFF Research Database (Denmark)

    Skou, Peter Bæk; Holroyd, Stephen E.; van der Berg, Franciscus Winfried J

    2017-01-01

    This tutorial presents extreme value theory (EVT) as an analytical tool in process characterization and shows its potential to describe production performance, eg, across different factories, via reliable estimates of the frequency and scale of extreme events. Two alternative EVT methods...... are discussed: point over threshold and block maxima. We illustrate the theoretical framework for EVT by process data from two different examples from the food-processing industry. Finally, we discuss limitations, decisions, and possibilities when applying EVT for process data....

  13. Experience and regulatory activities on advanced instrumentation and control systems applied to nuclear power plants in Korea

    International Nuclear Information System (INIS)

    Kim, B.R.

    1995-01-01

    This paper describes the status for applying microprocessor-based systems to nuclear power plants in Korea and the regulatory activities performed by Korea Institute of Nuclear Safety (KINS). And this presents the development of safety and regulatory technology for advanced I and C systems that has been carried out as a part of the next generation reactor development program in Korea. (author). 3 refs, 4 figs, 1 tab

  14. Applying the Dynamic Social Systems Model to HIV Prevention in a Rural African Context: The Maasai and the "Esoto" Dance

    Science.gov (United States)

    Siegler, Aaron J.; Mbwambo, Jessie K.; DiClemente, Ralph J.

    2013-01-01

    This study applied the Dynamic Social Systems Model (DSSM) to the issue of HIV risk among the Maasai tribe of Tanzania, using data from a cross-sectional, cluster survey among 370 randomly selected participants from Ngorongoro and Siha Districts. A culturally appropriate survey instrument was developed to explore traditions reportedly coadunate…

  15. Optimum systems design with random input and output applied to solar water heating

    Science.gov (United States)

    Abdel-Malek, L. L.

    1980-03-01

    Solar water heating systems are evaluated. Models were developed to estimate the percentage of energy supplied from the Sun to a household. Since solar water heating systems have random input and output queueing theory, birth and death processes were the major tools in developing the models of evaluation. Microeconomics methods help in determining the optimum size of the solar water heating system design parameters, i.e., the water tank volume and the collector area.

  16. ANALYTIC NETWORK PROCESS AND BALANCED SCORECARD APPLIED TO THE PERFORMANCE EVALUATION OF PUBLIC HEALTH SYSTEMS

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Reis dos Santos

    2015-08-01

    Full Text Available The performance of public health systems is an issue of great concern. After all, to assure people's quality of life, public health systems need different kinds of resources. Balanced Scorecard provides a multi-dimensional evaluation framework. This paper presents the application of the Analytic Network Process and Balanced Scorecard in the performance evaluation of a public health system in a typical medium-sized Southeastern town in Brazil.

  17. A robot-assisted synthesis system applied to 11C-alkylations

    International Nuclear Information System (INIS)

    Appelquist, G.; Bohm, C.; Eriksson, H.; Halldin, C.; Stone-Elander, S.

    1990-01-01

    A robot-based system for the production of radiopharmaceuticals has been developed, which consists of a 7-axis SCARA robot, supporting equipment, a synthesis module, and a PC-AT personal computer for system control. A Multifunction Editor (MFE) acts as the system controller and is a development tool as well. Robot movement can be controlled via keyboard, mouse, or remote control box, and procedures can be saved and edited for future use

  18. Measuring online learning systems success: applying the updated DeLone and McLean model.

    Science.gov (United States)

    Lin, Hsiu-Fen

    2007-12-01

    Based on a survey of 232 undergraduate students, this study used the updated DeLone and McLean information systems success model to examine the determinants for successful use of online learning systems (OLS). The results provided an expanded understanding of the factors that measure OLS success. The results also showed that system quality, information quality, and service quality had a significant effect on actual OLS use through user satisfaction and behavioral intention to use OLS.

  19. Embedded Web Technology: Applying World Wide Web Standards to Embedded Systems

    Science.gov (United States)

    Ponyik, Joseph G.; York, David W.

    2002-01-01

    Embedded Systems have traditionally been developed in a highly customized manner. The user interface hardware and software along with the interface to the embedded system are typically unique to the system for which they are built, resulting in extra cost to the system in terms of development time and maintenance effort. World Wide Web standards have been developed in the passed ten years with the goal of allowing servers and clients to intemperate seamlessly. The client and server systems can consist of differing hardware and software platforms but the World Wide Web standards allow them to interface without knowing about the details of system at the other end of the interface. Embedded Web Technology is the merging of Embedded Systems with the World Wide Web. Embedded Web Technology decreases the cost of developing and maintaining the user interface by allowing the user to interface to the embedded system through a web browser running on a standard personal computer. Embedded Web Technology can also be used to simplify an Embedded System's internal network.

  20. The Safeguards analysis applied to the RRP. Automatic sampling authentication system

    International Nuclear Information System (INIS)

    Ono, Sawako; Nakashima, Shinichi; Iwamoto, Tomonori

    2004-01-01

    The sampling for analysis from vessels and columns at the Rokkasho Reprocessing Plant (RRP) is performed mostly by the automatic sampling system. The safeguards sample for the verification also will be taken using these sampling systems and transfer to the OSL though the pneumatic transfer network owned and controlled by operator. In order to maintaining sample integrity and continuity of knowledge (CoK) for throughout the sample processing. It is essential to develop and establish the authentication measures for the automatic sampling system including transfer network. We have developed the Automatic Sampling Authentication System (ASAS) under consultation by IAEA. This paper describes structure, function and concept of ASAS. (author)

  1. Unsolved problems in applying U.S. regulatory guides to control system equipment

    International Nuclear Information System (INIS)

    Stade, R.E.

    1978-01-01

    Two current problems encountered when designing control systems to the United States Regulatory Guide requirements are discussed. They are: 1) Level of surge voltages that should be specified when procuring solid state control and instrumentation systems and equipment. 2) The approach to be used qualifying equipment that must meet the aging requirements. (author)

  2. Applying Web usage mining for personalizing hyperlinks in Web-based adaptive educational systems

    NARCIS (Netherlands)

    Romero, C.; Ventura, S.; Zafra, A.; Bra, de P.M.E.

    2009-01-01

    Nowadays, the application of Web mining techniques in e-learning and Web-based adaptive educational systems is increasing exponentially. In this paper, we propose an advanced architecture for a personalization system to facilitate Web mining. A specific Web mining tool is developed and a recommender

  3. Analysis, Modelling, and Simulation of Droop Control with Virtual Impedance Loop Applied to Parallel UPS Systems

    DEFF Research Database (Denmark)

    Lima, Francisco Kleber A.; Branco, Carlos Gustavo C.; Guerrero, Josep M.

    2013-01-01

    is difficult due to its physical location. This paper has considered that the UPS systems there were no comunication between their controls. A detailed mathematical model about the explored system is shown in that work and simulation results are presented in order to prove the theory presented....

  4. Applying the Australian and New Zealand Risk Management Standard to Information Systems in SMES

    Directory of Open Access Journals (Sweden)

    Robyn Davidson

    2004-11-01

    Full Text Available This paper advocates the use of the Australia/New Zealand Risk Management Standard (SA/SNZ, 1999 in conjunction with of a modified version of Birch and McEvoy’s (1992 Structured Risk Analysis for Information Systems (SRA-IS to identify information systems security risks in SMEs. The use of Internet based commerce by SMEs exposes them to information systems security risks that they are ill equipped to recognise let alone mitigate. Unlike the identification of some business risks, identification of risks associated with information systems requires certain technical expertise. The structure of the existing information system must be understood and modelled before risks can be identified and it is acknowledged that the required technical expertise may not be present in SMEs, thus the involvement of information systems consultants may be necessary. Once the information system has been modelled little information systems expertise is required to complete the analysis, keeping consultant involvement to a minimum and maximising owner/manager involvement.

  5. Model-based predictive control applied to multi-carrier energy systems

    NARCIS (Netherlands)

    Arnold, M.; Negenborn, R.R.; Andersson, G.; De Schutter, B.

    2009-01-01

    The optimal operation of an integrated electricity and natural gas infrastructure is investigated. The couplings between the electricity system and the gas system are modeled by so-called energy hubs, which represent the interface between the loads on the one hand and the transmission

  6. Closing the Loop with Sensors in Commercial Building Systems: Applying Lessons from Automotive Vehicles

    International Nuclear Information System (INIS)

    Mantese, Joseph

    2011-01-01

    Automotive systems have evolved extensively over the past 50 years, providing a fully integrated system of sub-systems that work in concert for optimal vehicle level closed loop control. In this talk we look at several automotive sub-systems: stability and control, safety and security, emissions and comfort, diagnostics and maintenance, infotainment and communications; with an eye toward understanding their technology drivers and associated value propositions. Conversely, we examine how commercial building systems currently are represented as a collection of sub-systems that often work independently of each other for local optimization, often relying upon open loop control systems developed and installed decades ago. Reasoning primarily by analogy we explore opportunities for energy and efficiency, comfort and environment, and safety/security; asking whether there is sufficient value associated with a new class of building sensors and how those technologies might be brought to bear in improving performance. Finally, we examine the fundamental architecture of detection systems built upon sensing elements, with the aim of understanding trade-offs between: detection, false alarm rate, power, and cost.

  7. Stability of Closed Loop Controlled Repetitive Periodic System applied to control of CD-Player

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Stoustrup, Jakob; Andersen, Palle

    2005-01-01

    In this paper a criterion for stability of specific control scheme for handling linear dynamic control systems with repetitive periodic sensor faults is derived. The given system and control scheme are described and defined. By combining these with the lifting technique a necessary and sufficient...

  8. High-throughput siRNA screening applied to the ubiquitin-proteasome system

    DEFF Research Database (Denmark)

    Poulsen, Esben Guldahl; Nielsen, Sofie V.; Pietras, Elin J.

    2016-01-01

    The ubiquitin-proteasome system is the major pathway for intracellular protein degradation in eukaryotic cells. Due to the large number of genes dedicated to the ubiquitin-proteasome system, mapping degradation pathways for short lived proteins is a daunting task, in particular in mammalian cells...

  9. Development of a desiccated cadaver delivery system to apply entomopathogenic nematodes for control of soil pests

    Science.gov (United States)

    Pentomopathogenic nematodes may be more capable of controlling soil pests when they are harbored by desiccated cadavers. A small-scale system was developed from a modified crop seed planter to effectively deliver desiccated nematode-infected cadavers into the soil. The system mainly consists of a me...

  10. Set Theory Applied to Uniquely Define the Inputs to Territorial Systems in Emergy Analyses

    Science.gov (United States)

    The language of set theory can be utilized to represent the emergy involved in all processes. In this paper we use set theory in an emergy evaluation to ensure an accurate representation of the inputs to territorial systems. We consider a generic territorial system and we describ...

  11. Applying four principles of headwater system aquatic biology to forest management

    Science.gov (United States)

    Robert J. Danehy; Sherri L. Johnson

    2013-01-01

    Headwater systems, including the channel and the adjacent riparian forest, are a dominant landscape feature in forested watersheds, draining most of the watershed area, and comprising the majority of channel length in drainage networks. Being at the upper extent of watersheds, these systems are smaller and steeper than large streams, and create microhabitats that...

  12. Supervisory System and Multivariable Control Applying Weighted Fuzzy-PID Logic in an Alcoholic Fermentation Process

    Directory of Open Access Journals (Sweden)

    Márcio Mendonça

    2015-10-01

    Full Text Available In this work, it is analyzed a multivariate system control of an alcoholic fermentation process with no minimum phase. The control is made with PID classic controllers associated with a supervisory system based on Fuzzy Systems. The Fuzzy system, a priori, send set-points to PID controllers, but also adds protection functions, such as if the biomass valued is at zero or very close. The Fuzzy controller changes the campaign to prevent or mitigate the paralyzation of the process. Three control architectures based on Fuzzy Control Systems are presented and compared in performance with classic control in different campaigns. The third architecture, in particular, adds an adaptive function. A brief summary of Fuzzy theory and correlated works will be presented. And, finally simulations results, conclusions and future works end the article.

  13. Applying Structural Systems Thinking to Frame Perspectives on Social Work Innovation.

    Science.gov (United States)

    Stringfellow, Erin J

    2017-03-01

    Innovation will be key to the success of the Grand Challenges Initiative in social work. A structural systems framework based in system dynamics could be useful for considering how to advance innovation. Diagrams using system dynamics conventions were developed to link common themes across concept papers written by social work faculty members and graduate students ( N = 19). Transdisciplinary teams and ethical partnerships with communities and practitioners will be needed to responsibly develop high-quality innovative solutions. A useful next step would be to clarify to what extent factors that could "make or break" these partnerships arise from within versus outside of the field of social work and how this has changed over time. Advancing innovation in social work will mean making decisions in a complex, ever-changing system. Principles and tools from methods that account for complexity, such as system dynamics, can help improve this decision-making process.

  14. The use of reliability analysis techniques applied to nuclear power station emergency core cooling systems

    International Nuclear Information System (INIS)

    Danielsen, A.; Snaith, E.R.

    1975-01-01

    A reliability investigation carried out by the Safety and Reliability Services of the UKAEA, and the SSEB, of the essential system/reactor coolant system for a large nuclear power station is described. In AGR type reactors, after all reactor shutdown conditions, it is necessary to restore forced gas circulation and sufficient boiler feed to maintain the heat removal capacity of the boilers. The coolant requirements are provided by several independent mechanical systems of primary coolant fans, feedwater pumps, and valves integrated with electrical power sources, switchgear, and automatic control equipment. Reliability is treated as one aspect of system performance and quantified in terms of failure to meet a specific objective. Based on the reliability performance of the constituent components the optimum system configuration is determined together with the preferred plant operating procedures and maintenance requirements. (author)

  15. Applying Diagnostics to Enhance Cable System Reliability (Cable Diagnostic Focused Initiative, Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    Hartlein, Rick [Georgia Tech Research Corporation (GTRC), Atlanta, GA (United States). National Electric Energy Testing, Research and Applications Center (NEETRAC); Hampton, Nigel [Georgia Tech Research Corporation (GTRC), Atlanta, GA (United States). National Electric Energy Testing, Research and Applications Center (NEETRAC); Perkel, Josh [Georgia Tech Research Corporation (GTRC), Atlanta, GA (United States). National Electric Energy Testing, Research and Applications Center (NEETRAC); Hernandez, JC [Univ. de Los Andes, Merida (Venezuela); Elledge, Stacy [Georgia Tech Research Corporation (GTRC), Atlanta, GA (United States). National Electric Energy Testing, Research and Applications Center (NEETRAC); del Valle, Yamille [Georgia Tech Research Corporation (GTRC), Atlanta, GA (United States). National Electric Energy Testing, Research and Applications Center (NEETRAC); Grimaldo, Jose [Georgia Inst. of Technology, Atlanta, GA (United States). School of Electrical and Computer Engineering; Deku, Kodzo [Georgia Inst. of Technology, Atlanta, GA (United States). George W. Woodruff School of Mechanical Engineering

    2016-02-01

    The Cable Diagnostic Focused Initiative (CDFI) played a significant and powerful role in clarifying the concerns and understanding the benefits of performing diagnostic tests on underground power cable systems. This project focused on the medium and high voltage cable systems used in utility transmission and distribution (T&D) systems. While many of the analysis techniques and interpretations are applicable to diagnostics and cable systems outside of T&D, areas such as generating stations (nuclear, coal, wind, etc.) and other industrial environments were not the focus. Many large utilities in North America now deploy diagnostics or have changed their diagnostic testing approach as a result of this project. Previous to the CDFI, different diagnostic technology providers individually promoted their approach as the “the best” or “the only” means of detecting cable system defects.

  16. The Analysis of Applying Different Coolants for Cooling Systems in the Office Building

    Directory of Open Access Journals (Sweden)

    Rasa Kanapienytė

    2011-12-01

    Full Text Available The paper analyzes air conditioning systems of different coolants on the basis of an example of a typical office building. Depending on the type of a coolant fan coil unit, active chilled beams, variable refrigerant volumes and air cooling systems were designed. The article suggests hydraulic and aerodynamic calculations and evaluates initial investments, energy expenditures and operating costs of the compared systems. Considering economic calculations, the pay-back time of the systems was assessed and the sensitivity analysis of electricity prices was carried out. The results of the conducted investigation show the most appropriate analysed system for office buildings taking into account the efficient use of electricity and initial investments.Article in Lithuanian

  17. Automated steering systems applied to complex horizontal well in South Italy

    Energy Technology Data Exchange (ETDEWEB)

    Calderoni, A.; Ligrone, A.; Trampini, A. [ENI AGIP (Italy); Oppelt, J.; Gauld, S. [Baker Hughes INTEQ (United States)

    1998-12-31

    A new drilling system that not only improved the quality of the borehole trajectory, but also resulted in significant savings in capital cost is described. The new concept in drilling is the result of a joint development between a major oil company and an oilfield service provider. Through providing a breakthrough technology in directional steering systems the accuracy of the borehole steering has been substantially improved. The new concept involves the use of a straight hole drilling system (SDD) in the upper hole section, in combination with the rotary steering system, AutoTrak, in the 8.5 inch hole size. By synergistically using the new automated tools, the well was drilled much more efficiently than offset wells, producing substantial time savings, a smoother trajectory and less friction. Details of the different automated directional drilling systems that were used together in a well for the first time at Monte Enoc 9 in South Italy are described. 2 refs., 3 tabs., 9 figs.

  18. Fuzzy-Skyhook Control for Active Suspension Systems Applied to a Full Vehicle Model

    Directory of Open Access Journals (Sweden)

    Aref M.A. Soliman

    2012-04-01

    Full Text Available Nowadays, most modern vehicles are equipped with controlled suspension systems for improving the vehicle ride comfort. Therefore, this paper is concerned with a theoretical study for the ride comfort performance of the vehicle. The theoretical investigation includes a suggestion of an active suspension system controller using fuzzy-skyhook control theory, which offers new opportunities for the improvement of vehicle ride performance. The ride comfort of the active suspension system has been evaluated using a 7 degree of freedom full vehicle mathematical model. The simulation results are presented in the time and frequency domain, also in terms of RMS values, and it’s shown that the proposed active suspension system with fuzzy-skyhook control improved the vehicle ride quality in terms of body acceleration, suspension working space and dynamic tyre load in comparison with the passive and skyhook suspension systems.

  19. Proposal for an Experimental Methodology for Evaluation of Natural Lighting Systems Applied in Buildings

    Directory of Open Access Journals (Sweden)

    Anderson Diogo Spacek

    2017-07-01

    Full Text Available This work has the objective of developing a methodology for the evaluation of indoor natural lighting systems, which, with speed and practicality, provides from real conditions of use a reliable result about the quality and performance of the proposed system. The methodology is based on the construction of two real-size test environments, which will be subjected to a natural light system through reflexive tubes made from recycled material, and to a commercial system already certified and consolidated, creating the possibility of comparison. Furthermore, the data acquired in the test environments will be examined in light of the values of solar radiation obtained from a digital meteorological station, such that it is possible to stipulate the lighting capacity of the systems at different times of the year.

  20. Software engineering principles applied to large healthcare information systems--a case report.

    Science.gov (United States)

    Nardon, Fabiane Bizinella; de A Moura, Lincoln

    2007-01-01

    São Paulo is the largest city in Brazil and one of the largest cities in the world. In 2004, São Paulo City Department of Health decided to implement a Healthcare Information System to support managing healthcare services and provide an ambulatory health record. The resulting information system is one of the largest public healthcare information systems ever built, with more than 2 million lines of code. Although statistics shows that most software projects fail, and the risks for the São Paulo initiative were enormous, the information system was completed on-time and on-budget. In this paper, we discuss the software engineering principles adopted that allowed to accomplish that project's goals, hoping that sharing the experience of this project will help other healthcare information systems initiatives to succeed.

  1. Wireless control system for two-axis linear oscillating motion applying CBR technology

    Science.gov (United States)

    Kuzyakov, O. N.; Andreeva, M. A.

    2018-03-01

    The paper presents the aspects of elaborating a movement control system. The system is to implement determination of movement characteristics of the object controlled, which performs an oscillating linear motion in a two-axis direction. The system has an electronic-optical principle of action: light receivers are attached to a controlled object, and a laser light emitter is attached to a static construction. While the object performs movement along the construction, the light emitter signal is registered by light receivers, based on which determination of the object position and characteristic of its movement are performed. An algorithm of system implementation is elaborated. Signal processing is performed on the basis of the case-based reasoning method. The system is to be used in machine-building industry in controlling relative displacement of the dynamic object or its assembly.

  2. Topological data analysis (TDA) applied to reveal pedogenetic principles of European topsoil system.

    Science.gov (United States)

    Savic, Aleksandar; Toth, Gergely; Duponchel, Ludovic

    2017-05-15

    Recent developments in applied mathematics are bringing new tools that are capable to synthesize knowledge in various disciplines, and help in finding hidden relationships between variables. One such technique is topological data analysis (TDA), a fusion of classical exploration techniques such as principal component analysis (PCA), and a topological point of view applied to clustering of results. Various phenomena have already received new interpretations thanks to TDA, from the proper choice of sport teams to cancer treatments. For the first time, this technique has been applied in soil science, to show the interaction between physical and chemical soil attributes and main soil-forming factors, such as climate and land use. The topsoil data set of the Land Use/Land Cover Area Frame survey (LUCAS) was used as a comprehensive database that consists of approximately 20,000 samples, each described by 12 physical and chemical parameters. After the application of TDA, results obtained were cross-checked against known grouping parameters including five types of land cover, nine types of climate and the organic carbon content of soil. Some of the grouping characteristics observed using standard approaches were confirmed by TDA (e.g., organic carbon content) but novel subtle relationships (e.g., magnitude of anthropogenic effect in soil formation), were discovered as well. The importance of this finding is that TDA is a unique mathematical technique capable of extracting complex relations hidden in soil science data sets, giving the opportunity to see the influence of physicochemical, biotic and abiotic factors on topsoil formation through fresh eyes. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. The fiber optics router apply to the control system of HIRFL-CSR

    International Nuclear Information System (INIS)

    Zhang Shuocheng; Wang Dan; Jing Lan; Qiao Weimin; Ma Yunhai

    2006-01-01

    The authors introduced a kind of Fiber Optic Router that we had designed specially applies to the engineering HIRFL-CSR (Heavy Ion Research Facility in Lanzhou). Including design principle, operational principle, and hardware construction, field of application. The router has standard communication interface such as RS232, RS485, Ethernet and Optics; setup of an optical communication network is simplified. It solved problems such as communication disturb. The requirements of control in the national great science engineering HIRFL-CSR are fulfilled. (authors)

  4. Two fiber optics communication adapters apply to the control system of HIRFL-CSR

    International Nuclear Information System (INIS)

    Wang Dan; Zhang Shuocheng; Jing Lan; Zhang Wei; Ma Yunhai

    2006-01-01

    The authors introduced two kinds of fiber adapters that apply to the engineering HIRFL-CSR. Including design of two adapters, operational principle, and hardware construction, field of application. How to control equipment which have the standard RS232 or RS485 interface at long distance by two adapters. Replace the RS485 bus with the fiber and the 485-Fiber Adapter, solved the problem of communication disturb. The requirements of control in the national great science engineering HIRFL-CSR are fulfilled. (authors)

  5. Perturbative methods applied for sensitive coefficients calculations in thermal-hydraulic systems

    International Nuclear Information System (INIS)

    Andrade Lima, F.R. de

    1993-01-01

    The differential formalism and the Generalized Perturbation Theory (GPT) are applied to sensitivity analysis of thermal-hydraulics problems related to pressurized water reactor cores. The equations describing the thermal-hydraulic behavior of these reactors cores, used in COBRA-IV-I code, are conveniently written. The importance function related to the response of interest and the sensitivity coefficient of this response with respect to various selected parameters are obtained by using Differential and Generalized Perturbation Theory. The comparison among the results obtained with the application of these perturbative methods and those obtained directly with the model developed in COBRA-IV-I code shows a very good agreement. (author)

  6. Principle of maximum Fisher information from Hardy's axioms applied to statistical systems.

    Science.gov (United States)

    Frieden, B Roy; Gatenby, Robert A

    2013-10-01

    Consider a finite-sized, multidimensional system in parameter state a. The system is either at statistical equilibrium or general nonequilibrium, and may obey either classical or quantum physics. L. Hardy's mathematical axioms provide a basis for the physics obeyed by any such system. One axiom is that the number N of distinguishable states a in the system obeys N=max. This assumes that N is known as deterministic prior knowledge. However, most observed systems suffer statistical fluctuations, for which N is therefore only known approximately. Then what happens if the scope of the axiom N=max is extended to include such observed systems? It is found that the state a of the system must obey a principle of maximum Fisher information, I=I(max). This is important because many physical laws have been derived, assuming as a working hypothesis that I=I(max). These derivations include uses of the principle of extreme physical information (EPI). Examples of such derivations were of the De Broglie wave hypothesis, quantum wave equations, Maxwell's equations, new laws of biology (e.g., of Coulomb force-directed cell development and of in situ cancer growth), and new laws of economic fluctuation and investment. That the principle I=I(max) itself derives from suitably extended Hardy axioms thereby eliminates its need to be assumed in these derivations. Thus, uses of I=I(max) and EPI express physics at its most fundamental level, its axiomatic basis in math.

  7. Virtual design and optimization studies for industrial silicon microphones applying tailored system-level modeling

    Science.gov (United States)

    Kuenzig, Thomas; Dehé, Alfons; Krumbein, Ulrich; Schrag, Gabriele

    2018-05-01

    Maxing out the technological limits in order to satisfy the customers’ demands and obtain the best performance of micro-devices and-systems is a challenge of today’s manufacturers. Dedicated system simulation is key to investigate the potential of device and system concepts in order to identify the best design w.r.t. the given requirements. We present a tailored, physics-based system-level modeling approach combining lumped with distributed models that provides detailed insight into the device and system operation at low computational expense. The resulting transparent, scalable (i.e. reusable) and modularly composed models explicitly contain the physical dependency on all relevant parameters, thus being well suited for dedicated investigation and optimization of MEMS devices and systems. This is demonstrated for an industrial capacitive silicon microphone. The performance of such microphones is determined by distributed effects like viscous damping and inhomogeneous capacitance variation across the membrane as well as by system-level phenomena like package-induced acoustic effects and the impact of the electronic circuitry for biasing and read-out. The here presented model covers all relevant figures of merit and, thus, enables to evaluate the optimization potential of silicon microphones towards high fidelity applications. This work was carried out at the Technical University of Munich, Chair for Physics of Electrotechnology. Thomas Kuenzig is now with Infineon Technologies AG, Neubiberg.

  8. An applied methodology for assessment of the sustainability of biomass district heating systems

    Science.gov (United States)

    Vallios, Ioannis; Tsoutsos, Theocharis; Papadakis, George

    2016-03-01

    In order to maximise the share of biomass in the energy supplying system, the designers should adopt the appropriate changes to the traditional systems and become more familiar with the design details of the biomass heating systems. The aim of this study is to present the development of methodology and its associated implementation in software that is useful for the design of biomass thermal conversion systems linked with district heating (DH) systems, taking into consideration the types of building structures and urban settlement layout around the plant. The methodology is based on a completely parametric logic, providing an impact assessment of variations in one or more technical and/or economic parameters and thus, facilitating a quick conclusion on the viability of this particular energy system. The essential energy parameters are presented and discussed for the design of biomass power and heat production system which are in connection with DH network, as well as for its environmental and economic evaluation (i.e. selectivity and viability of the relevant investment). Emphasis has been placed upon the technical parameters of biomass logistics, energy system's design, the economic details of the selected technology (integrated cogeneration combined cycle or direct combustion boiler), the DH network and peripheral equipment (thermal substations) and the greenhouse gas emissions. The purpose of this implementation is the assessment of the pertinent investment financial viability taking into account the available biomass feedstock, the economical and market conditions, and the capital/operating costs. As long as biomass resources (forest wood and cultivation products) are available and close to the settlement, disposal and transportation costs of biomass, remain low assuring the sustainability of such energy systems.

  9. Applying dynamic priority scheduling scheme to static systems of pinwheel task model in power-aware scheduling.

    Science.gov (United States)

    Seol, Ye-In; Kim, Young-Kuk

    2014-01-01

    Power-aware scheduling reduces CPU energy consumption in hard real-time systems through dynamic voltage scaling (DVS). In this paper, we deal with pinwheel task model which is known as static and predictable task model and could be applied to various embedded or ubiquitous systems. In pinwheel task model, each task's priority is static and its execution sequence could be predetermined. There have been many static approaches to power-aware scheduling in pinwheel task model. But, in this paper, we will show that the dynamic priority scheduling results in power-aware scheduling could be applied to pinwheel task model. This method is more effective than adopting the previous static priority scheduling methods in saving energy consumption and, for the system being still static, it is more tractable and applicable to small sized embedded or ubiquitous computing. Also, we introduce a novel power-aware scheduling algorithm which exploits all slacks under preemptive earliest-deadline first scheduling which is optimal in uniprocessor system. The dynamic priority method presented in this paper could be applied directly to static systems of pinwheel task model. The simulation results show that the proposed algorithm with the algorithmic complexity of O(n) reduces the energy consumption by 10-80% over the existing algorithms.

  10. Learner-oriented distance education supporting service system model and applied research

    Directory of Open Access Journals (Sweden)

    Chen Liyong

    2016-01-01

    Full Text Available Distance education is a product of social progress and an emerging way of life-long learning as well. This paper describes the construction of the distance education supporting service system and establishes the distance education supporting service system from the perspective of distance education learners. Under the premise of considering to provide six influencing factors--learning facilities, learning coaching and counseling, learning resources, education and teaching information, assessment of student learning situation and organization of practical teaching activities, this paper assesses the distance education supporting service system of Beijing, Shanghai and Shenzhen by using AHP.

  11. Interferogram reduction and interpretation as applied to the optical analysis of a laser fusion system

    International Nuclear Information System (INIS)

    Viswanathan, V.K.; Sollid, J.E.; Hall, W.S.; Liberman, I.; Lawrence, G.

    1978-01-01

    The 10 kJ Eight-Beam CO 2 Laser Fusion System, currently under construction at Los Alamos Scientific Laboratory (LASL), has approximately 100 optical elements per beam. The nominal system is diffraction limited and degradations in performance are caused primarily by imperfect components and alignment errors. Consequently, analysis and predictions for the system are very much dependent on the proper description of the imperfect components. The approach taken at LASL has been to characterize the components interferometrically. An example of this procedure, using an actual interferogram of a manufactured component, will be presented and the various limitations will be discussed

  12. Systems engineering applied to integrated safety management for high consequence facilities

    International Nuclear Information System (INIS)

    Barter, R; Morais, B.

    1998-01-01

    Integrated Safety Management is a concept that is being actively promoted by the U.S. Department of Energy as a means of assuring safe operation of its facilities. The concept involves the integration of safety precepts into work planning rather than adjusting for safe operations after defining the work activity. The system engineering techniques used to design an integrated safety management system for a high consequence research facility are described. An example is given to show how the concepts evolved with the system design

  13. The distribution of 32P in the rice plant applied to a single root and to the whole root system

    International Nuclear Information System (INIS)

    Sisworo, E.L.; Gandanegara, S.; Sisworo, W.H.; Rasyid, H.; Sumarna, Nana

    1982-01-01

    Two greenhouse experiments to study the distribution of 32 P applied to a single root and to the whole root system have been carried out. Data from experiment 1 showed that 32 P activity in shoots rose with the progress of time; where 32 P was applied to a single root 6 hours after isotope application the 32 P activity in the shoots of plants was higher than if the isotope was applied to the whole root system. Three hours after 32 P application, plants with 50% of roots had a higher 32 P activity than plants with no root cutting. Data from experiment 2 showed that 32 P activity of plants that received 32 P through a single root only was lower than those that received 32 P through the whole root system. This was in contradiction with the data obtained in experiment 1. Experiment 2 also showed that 32 P activity increased with time. Autoradiographs of plants in experiment 1 and 2 showed that 32 P was distributed through the whole plant, although when the isotope was only applied to a single root. (author)

  14. The systems approach for applying artificial intelligence to space station automation (Invited Paper)

    Science.gov (United States)

    Grose, Vernon L.

    1985-12-01

    The progress of technology is marked by fragmentation -- dividing research and development into ever narrower fields of specialization. Ultimately, specialists know everything about nothing. And hope for integrating those slender slivers of specialty into a whole fades. Without an integrated, all-encompassing perspective, technology becomes applied in a lopsided and often inefficient manner. A decisionary model, developed and applied for NASA's Chief Engineer toward establishment of commercial space operations, can be adapted to the identification, evaluation, and selection of optimum application of artificial intelligence for space station automation -- restoring wholeness to a situation that is otherwise chaotic due to increasing subdivision of effort. Issues such as functional assignments for space station task, domain, and symptom modules can be resolved in a manner understood by all parties rather than just the person with assigned responsibility -- and ranked by overall significance to mission accomplishment. Ranking is based on the three basic parameters of cost, performance, and schedule. This approach has successfully integrated many diverse specialties in situations like worldwide terrorism control, coal mining safety, medical malpractice risk, grain elevator explosion prevention, offshore drilling hazards, and criminal justice resource allocation -- all of which would have otherwise been subject to "squeaky wheel" emphasis and support of decision-makers.

  15. Technology of geographical information systems applied to the licensing of nuclear sector installations

    International Nuclear Information System (INIS)

    Oliveira, Aline F.G. De; Barreto, Alberto A.; Carvalho Filho, Carlos A. de; Rodrigues, Paulo Cezar Horta; Moura, Igor Felipe Silva

    2017-01-01

    The nuclear licensing process involves the preparation of documents such as Local's Report (LR), Preliminary Safety Analysis Report (PSAR), Final Safety Analysis Report (FSAR), Physical Protection Plans, Radiation Protection Plans and Emergency plans that must be submit to the National Nuclear Energy Commission (DRS / CNEN) for approval. This work presents an analysis and a guide for the use of Geoprocessing tools in the updating of environmental studies necessary to update the Local's Report (LR) of the Center for the Development of Nuclear Technology (CDTN). The main purpose is to contribute to streamline the execution of steps involved in the nuclear licensing process, such as structuring and executing environmental studies, planning environmental monitoring activities, etc. To achieve the objective, we search for and obtained available data of high reliability in various organs using a methodological flowchart for data acquisition and treatment. The study was develop using the ArcMap 10.2 application from ArcGis, especially the Model Builder analytic tool. This tool allowed the (macro) schematization of the methodology from the applied GIS tools, which presents as advantages to the efficiency and optimization of the execution time of the procedures in situations where it is necessary to apply the same routine of tasks, besides the fact of being editable, which offers possibilities for adaptations and improvements. (author)

  16. Review. Advantages and disadvantages of control theories applied in greenhouse climate control systems

    Energy Technology Data Exchange (ETDEWEB)

    Duarte-Galvan, C.; Torres-Pacheco, I.; Guevara-Gonzalez, R. G.; Romero-Troncoso, R. J.; Contreras-Medina, L. M.; Rios-Alcaraz, M. A.; Millan-Almaraz, J. R.

    2012-07-01

    Today agriculture is changing in response to the requirements of modern society, where ensuring food supply through practices such as water conservation, reduction of agrochemicals and the required planted surface, which guarantees high quality crops are in demand. Greenhouses have proven to be a reliable solution to achieve these goals; however, a greenhouse as a means for protected agriculture has the potential to lead to serious problems. The most of these are related to the inside greenhouse climate conditions where controlling the temperature and relative humidity (RH) are the main objectives of engineering. Achieving appropriate climate conditions to ensure high yield and quality crops reducing energy consumption have been the objective of investigations for some time. Different schemes in control theories have been applied in this field to solve the aforementioned problems. Therefore, the objective of this paper is to present a review of different control techniques applied in protected agriculture to manage greenhouse climate conditions, presenting advantages and disadvantages of developed control platforms in order to suggest a design methodology according to results obtained from different investigations. (Author) 64 refs.

  17. Technology of geographical information systems applied to the licensing of nuclear sector installations

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Aline F.G. De; Barreto, Alberto A.; Carvalho Filho, Carlos A. de; Rodrigues, Paulo Cezar Horta [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Moura, Igor Felipe Silva, E-mail: afgo@cdtn.br, E-mail: aab@cdtn.br, E-mail: cacf@cdtn.br, E-mail: igorfelipedx@ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2017-07-01

    The nuclear licensing process involves the preparation of documents such as Local's Report (LR), Preliminary Safety Analysis Report (PSAR), Final Safety Analysis Report (FSAR), Physical Protection Plans, Radiation Protection Plans and Emergency plans that must be submit to the National Nuclear Energy Commission (DRS / CNEN) for approval. This work presents an analysis and a guide for the use of Geoprocessing tools in the updating of environmental studies necessary to update the Local's Report (LR) of the Center for the Development of Nuclear Technology (CDTN). The main purpose is to contribute to streamline the execution of steps involved in the nuclear licensing process, such as structuring and executing environmental studies, planning environmental monitoring activities, etc. To achieve the objective, we search for and obtained available data of high reliability in various organs using a methodological flowchart for data acquisition and treatment. The study was develop using the ArcMap 10.2 application from ArcGis, especially the Model Builder analytic tool. This tool allowed the (macro) schematization of the methodology from the applied GIS tools, which presents as advantages to the efficiency and optimization of the execution time of the procedures in situations where it is necessary to apply the same routine of tasks, besides the fact of being editable, which offers possibilities for adaptations and improvements. (author)

  18. Donor impurity states and related optical response in a lateral coupled dot-ring system under applied electric field

    Energy Technology Data Exchange (ETDEWEB)

    Correa, J.D. [Departamento de Ciencias Básicas, Universidad de Medellín, Medellín (Colombia); Mora-Ramos, M.E. [Centro de Investigación en Ciencias, Instituto de Ciencias Básicas y Aplicadas, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, CP 62209 Cuernavaca, Morelos (Mexico); Duque, C.A., E-mail: cduque@fisica.udea.edu.co [Grupo de Materia Condensada-UdeA, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín (Colombia)

    2015-09-01

    A study on the effects of an externally applied electric field on the linear optical absorption and relative refractive index change associated with transitions between off-center donor impurity states in laterally coupled quantum dot-ring system is reported. Electron states are calculated within the effective mass and parabolic band approximations by means of an exact diagonalization procedure. The states and the optical response in each case show significant sensitivity to the geometrical distribution of confining energies as well as to the strength of the applied field.

  19. Donor impurity states and related optical response in a lateral coupled dot-ring system under applied electric field

    International Nuclear Information System (INIS)

    Correa, J.D.; Mora-Ramos, M.E.; Duque, C.A.

    2015-01-01

    A study on the effects of an externally applied electric field on the linear optical absorption and relative refractive index change associated with transitions between off-center donor impurity states in laterally coupled quantum dot-ring system is reported. Electron states are calculated within the effective mass and parabolic band approximations by means of an exact diagonalization procedure. The states and the optical response in each case show significant sensitivity to the geometrical distribution of confining energies as well as to the strength of the applied field

  20. A gamma-ray therapeutic system applied to treatment of body

    International Nuclear Information System (INIS)

    Huang Yu; Duan Zhengcheng; Zhu Guoli; Gong Shihua; Li Xiaoping

    2004-01-01

    In order to treat malignant tumors in human body, a stereotactic gamma-ray whole-body therapeutic system has been developed. This system is a typical large mechatronics treatment machine. In this paper, its main working principles and characteristics are introduced. This system comprises a special gallows frame with an open vertical structure, a changeable collimator device by which the size of convergence center can be chosen, and a 3D treatment couch. A computer brings the couch to target position automatically. Therefore precise and dynamic rotary converging therapy for tumors located anywhere in the body has been realized. The system's performance has been proved in practice, which includes good curative effect, reliable automation, and safe and secure operation. (authors)

  1. Assessment of the urban water system with an open, reproducible process applied to Chicago

    Science.gov (United States)

    Urban water systems convey complex environmental and man-made flows. The relationships among water flows and networked storages remains difficult to comprehensively evaluate. Such evaluation is important, however, as interventions are designed (e.g, conservation measures, green...

  2. Design and Optimization of Space System Architectures: Applying and Extracting Lessons Learned

    Data.gov (United States)

    National Aeronautics and Space Administration — TABS 11.2.6, TABS 11.3.3, and TABS 11.4.2 call for improvements in tradespace exploration and analysis technology that takes advantage of model based system...

  3. On-line computer system applied in a nuclear chemistry laboratory

    International Nuclear Information System (INIS)

    Banasik, Z.; Kierzek, J.; Parus, J.; Zoltowski, T.; Zalewski, J.

    1980-01-01

    A PDP-11/45 based computer system used in a radioanalytical chemical laboratory is described. It is mainly concerned with spectrometry of ionizing radiation and remote measurement of physico-chemical properties. The objectives in mind when constructing the hardware inter-connections and developing the software of the system were to minimize the work of the electronics and computer personnel and to provide maximum flexibility for the users. For the hardware interfacing, 3 categories of equipment are used: - LPS-11 Laboratory Peripheral System - CAMAC system with CA11F-P controller - interfaces from instrument manufacturers. Flexible operation has been achieved by using a 3-level programming structure: - data transfer by assembly language programs - data formatting using bit operations in FORTRAN - data evaluation by procedures written in FORTRAN. (Auth.)

  4. Basic and applied research related to the technology of space energy conversion systems, 1982 - 1983

    Science.gov (United States)

    Hertzberg, A.

    1983-01-01

    Topics on solar energy conversion concepts and applications are discussed. An overview of the current status and future utilization of radiation receivers for electrical energy generation, liquid droplet radiation systems, and liquid droplet heat exchangers is presented.

  5. Design Secondary Optical System Applied in White-LED General Illumination

    International Nuclear Information System (INIS)

    Chen Chen; Zhang Xianhui

    2011-01-01

    As a new generation of light source, LED has many advantages that other light sources do not have. However, due to the nonuniform lighting of LED, secondary LED optical system design is particularly important. Freeform surface tailoring method, an important method of lighting design, establishes a light intensity change model after smooth surface refraction (reflection) of the light and simplifies the solution process for more complex issues of solution using the free surface tailoring method. Based on this method, secondary LED optical system is designed, and the light intensity distribution is simulated after LED light passes through the secondary optical system. The results show that the method has not only simplified the calculation process of the free surface tailoring method, but also the designed LED secondary optical system has achieved the purpose of uniform lighting to a certain degree.

  6. Network analysis as a tool for assessing environmental sustainability: applying the ecosystem perspective to a Danish water management system

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Scotti, Marco; Thomsen, Marianne

    2013-01-01

    New insights into the sustainable use of natural resources in human systems can be gained through comparison with ecosystems via common indices. In both kinds of system, resources are processed by a number of users within a network, but we consider ecosystems as the only ones displaying sustainable...... patterns of growth and development. We applied Network Analysis (NA) for assessing the sustainability of a Danish municipal Water Management System (WMS). We identified water users within the WMS and represented their interactions as a network of water flows. We computed intensive and extensive indices...

  7. Using LDR as Sensing Element for an External Fuzzy Controller Applied in Photovoltaic Pumping Systems with Variable-Speed Drives.

    Science.gov (United States)

    Maranhão, Geraldo Neves De A; Brito, Alaan Ubaiara; Leal, Anderson Marques; Fonseca, Jéssica Kelly Silva; Macêdo, Wilson Negrão

    2015-09-22

    In the present paper, a fuzzy controller applied to a Variable-Speed Drive (VSD) for use in Photovoltaic Pumping Systems (PVPS) is proposed. The fuzzy logic system (FLS) used is embedded in a microcontroller and corresponds to a proportional-derivative controller. A Light-Dependent Resistor (LDR) is used to measure, approximately, the irradiance incident on the PV array. Experimental tests are executed using an Arduino board. The experimental results show that the fuzzy controller is capable of operating the system continuously throughout the day and controlling the direct current (DC) voltage level in the VSD with a good performance.

  8. Using LDR as Sensing Element for an External Fuzzy Controller Applied in Photovoltaic Pumping Systems with Variable-Speed Drives

    Directory of Open Access Journals (Sweden)

    Geraldo Neves De A. Maranhão

    2015-09-01

    Full Text Available In the present paper, a fuzzy controller applied to a Variable-Speed Drive (VSD for use in Photovoltaic Pumping Systems (PVPS is proposed. The fuzzy logic system (FLS used is embedded in a microcontroller and corresponds to a proportional-derivative controller. A Light-Dependent Resistor (LDR is used to measure, approximately, the irradiance incident on the PV array. Experimental tests are executed using an Arduino board. The experimental results show that the fuzzy controller is capable of operating the system continuously throughout the day and controlling the direct current (DC voltage level in the VSD with a good performance.

  9. A Framework for Knowledge Management and Automated Reasoning Applied on Intelligent Transport Systems

    OpenAIRE

    Feljan, Aneta Vulgarakis; Karapantelakis, Athanasios; Mokrushin, Leonid; Liang, Hongxin; Inam, Rafia; Fersman, Elena; Azevedo, Carlos R. B.; Raizer, Klaus; Souza, Ricardo S.

    2017-01-01

    Cyber-Physical Systems in general, and Intelligent Transport Systems (ITS) in particular use heterogeneous data sources combined with problem solving expertise in order to make critical decisions that may lead to some form of actions e.g., driver notifications, change of traffic light signals and braking to prevent an accident. Currently, a major part of the decision process is done by human domain experts, which is time-consuming, tedious and error-prone. Additionally, due to the intrinsic n...

  10. Principles and practices of lean production applied in a metal structures production system

    OpenAIRE

    Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

    2011-01-01

    This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

  11. Applying the System Component and Operationally Relevant Evaluation (SCORE) Framework to Evaluate Advanced Military Technologies

    Science.gov (United States)

    2010-03-01

    and charac- terize the actions taken by the soldier (e.g., running, walking, climbing stairs ). Real-time image capture and exchange N The ability of...multimedia information sharing among soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. Key words: Emerging...soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. It has been the foundation for 10 technology evaluations

  12. Resonant state expansion applied to three-dimensional open optical systems

    OpenAIRE

    Doost, M. B.; Langbein, W.; Muljarov, E. A.

    2014-01-01

    The resonant-state expansion (RSE), a rigorous perturbative method in electrodynamics, is developed for three-dimensional open optical systems. Results are presented using the analytically solvable homogeneous dielectric sphere as unperturbed system. Since any perturbation which breaks the spherical symmetry mixes transverse electric (TE) and transverse magnetic (TM) modes, the RSE is extended here to include TM modes and a zero-frequency pole of the Green's function. We demonstrate the valid...

  13. ANALYSIS OF THE EFFICIENCY OF APPLYING THE QUALITY MANAGEMENT SYSTEM IN INDUSTRIAL ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Andrei DIAMANDESCU

    2017-05-01

    Full Text Available In this article we propose to illustrate the methodology of measuring and assessing the impact of quality systems on the performance of industrial businesses. If in terms of the total quality management system – TQM, the impact may be measured by comparing the business performance with a reference standard (for instance ISO 9001, which records the difference compared to the performance prior to implementing the TQM, or, on rarer occasions, by optimizing the costs of quality with the help of econometric models, for the integrated quality improvement system, comprising of the TQM system based on the ISO standards and the Kaizen management system, which we propose and assess within this article, the efficiency/performance will be measured through a methodology based on analyzing the evolution of financial indicators for business performance. This approach was implemented as a result of findings from the businesses where we have been provided with documentation, and where the calculation and assessment of quality system operation efficiency by optimizing costs using the classic or improved econometric models is not approved by the management.

  14. Applied reliability assessment for the passive safety systems of nuclear power plants (NPPs) using system dynamics (SD)

    International Nuclear Information System (INIS)

    Kim, Yun Il; Woo, Tae Ho

    2018-01-01

    The passive system by the free-fall is investigated in the accident of nuclear power plants (NPPs). The complex algorithm of the system dynamics (SD) modeling is done in the passive cooling system. The nuclear passive system by free-fall is successfully modeled for the loss of coolant accident (LOCA). Conventional passive system of gravity or natural circulation is working only when the piping systems is in the good condition. The external coolant supply system is introduced in the case of the piping system failure. The water is poured into the reactor through the guiding piping or tube. If the explosion happens, the coolants could be showering into the reactor core and its building. New kind of passive system is expected successfully in the on-site black out where the drone could be operated by battery or engine.

  15. Azcaxalli: A system based on Ant Colony Optimization algorithms, applied to fuel reloads design in a Boiling Water Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Esquivel-Estrada, Jaime, E-mail: jaime.esquivel@fi.uaemex.m [Facultad de Ingenieria, Universidad Autonoma del Estado de Mexico, Cerro de Coatepec S/N, Toluca de Lerdo, Estado de Mexico 50000 (Mexico); Instituto Nacional de Investigaciones Nucleares, Carr. Mexico Toluca S/N, Ocoyoacac, Estado de Mexico 52750 (Mexico); Ortiz-Servin, Juan Jose, E-mail: juanjose.ortiz@inin.gob.m [Instituto Nacional de Investigaciones Nucleares, Carr. Mexico Toluca S/N, Ocoyoacac, Estado de Mexico 52750 (Mexico); Castillo, Jose Alejandro; Perusquia, Raul [Instituto Nacional de Investigaciones Nucleares, Carr. Mexico Toluca S/N, Ocoyoacac, Estado de Mexico 52750 (Mexico)

    2011-01-15

    This paper presents some results of the implementation of several optimization algorithms based on ant colonies, applied to the fuel reload design in a Boiling Water Reactor. The system called Azcaxalli is constructed with the following algorithms: Ant Colony System, Ant System, Best-Worst Ant System and MAX-MIN Ant System. Azcaxalli starts with a random fuel reload. Ants move into reactor core channels according to the State Transition Rule in order to select two fuel assemblies into a 1/8 part of the reactor core and change positions between them. This rule takes into account pheromone trails and acquired knowledge. Acquired knowledge is obtained from load cycle values of fuel assemblies. Azcaxalli claim is to work in order to maximize the cycle length taking into account several safety parameters. Azcaxalli's objective function involves thermal limits at the end of the cycle, cold shutdown margin at the beginning of the cycle and the neutron effective multiplication factor for a given cycle exposure. Those parameters are calculated by CM-PRESTO code. Through the Haling Principle is possible to calculate the end of the cycle. This system was applied to an equilibrium cycle of 18 months of Laguna Verde Nuclear Power Plant in Mexico. The results show that the system obtains fuel reloads with higher cycle lengths than the original fuel reload. Azcaxalli results are compared with genetic algorithms, tabu search and neural networks results.

  16. Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nogiec, J. M. [Fermilab; Trombly-Freytag, K. [Fermilab

    2017-01-01

    Current trends in the architecture of software systems focus our attention on building systems using a set of loosely coupled components, each providing a specific functionality known as service. It is not much different in control and monitoring systems, where a functionally distinct sub-system can be identified and independently designed, implemented, deployed and maintained. One functionality that renders itself perfectly to becoming a service is archiving the history of the system state. The design of such a service and our experience of using it are the topic of this article. The service is built with responsibility segregation in mind, therefore, it provides for reducing data processing on the data viewer side and separation of data access and modification operations. The service architecture and the details concerning its data store design are discussed. An implementation of a service client capable of archiving EPICS process variables (PV) and LabVIEW shared variables is presented. Data access tools, including a browser-based data viewer and a mobile viewer, are also presented.

  17. [Applying Neuman's Systems Model to a neuroleptic malignant syndrome psychiatric patient and his caregiver].

    Science.gov (United States)

    Wang, Shu-Mi; Lai, Chien-Yu

    2010-04-01

    This article describes a nurse's experience using Neuman's Systems Model to care for a chronic psychiatric patient and his caregiver. The patient was diagnosed as suffering from neuroleptic malignant syndrome (NMS). Nursing care described in this article was administered from October 23 to December 4, 2007. The patient developed NMS in the third month of a three-month period of hospitalization, which endangered his life as well as the health of his caregiver. Nursing care was provided to the patient and his caregiver based on Neuman's Systems Model, which included assessments of intrapersonal, interpersonal, and extra-personal forces as well as of environmental factors affecting the health of the patient and his caregiver. The four nursing care issues identified included: existing self-care deficit, sensory/perceptual alteration, sleep pattern disturbance, and caregiver role strain. Following Neuman's systems model, primary, secondary, and tertiary prevention were used to strengthen the flexible lines of defense, internal lines of resistance, and supporting existing strengths of both patient and caregiver, as well as to conserve client system energy. Significant improvements in patient and caregiver abilities were apparent in nursing intervention outcomes. This experience shows the Neuman's systems model to be an efficient model in psychiatric nursing care.

  18. Interoperable computerized smart card based system for health insurance and health services applied in cardiology.

    Science.gov (United States)

    Cocei, Horia-Delatebea; Stefan, Livia; Dobre, Ioana; Croitoriu, Mihai; Sinescu, Crina; Ovricenco, Eduard

    2002-01-01

    In 1999 Romania started its health care reform by promulgating the Health Insurance Law. A functional and efficient health care system needs procedures for monitoring and evaluation of the medical services, communication between different service providers and entities involved in the system, integration and availability of the information. The final goal is a good response to the needs and demands of the patients and of the real life. For this project we took into account, on one hand, the immediate need for computerized systems for the health care providers and, on the other hand, the large number of trials and experiments with health smart cards across Europe. Our project will implement a management system based on electronic patient records to be used in all cardiology clinics and will experiment the health smart cards, will promote and demonstrate the capabilities of the smart card technology. We focused our attention towards a specific and also critical category of patients, those with heart diseases, and also towards a critical sector of the health care system--the emergency care. The patient card was tested on a number of 150 patients at a cardiology clinic in Bucharest. This was the first trial of a health smart card in Romania.

  19. Trust-Based Cooperative Social System Applied to a Carpooling Platform for Smartphones

    Directory of Open Access Journals (Sweden)

    Cándido Caballero-Gil

    2017-01-01

    Full Text Available One of the worst traffic problems today is the existence of huge traffic jams in almost any big city, produced by the large number of commuters using private cars. This problem has led to an increase in research on the optimization of vehicle occupancy in urban areas as this would help to solve the problem that most cars are occupied by single passengers. The solution of sharing the available seats in cars, known as carpooling, is already available in major cities around the world. However, carpooling is still not considered a safe and reliable solution for many users. With the widespread use of mobile technology and social networks, it is possible to create a trust-based platform to promote carpooling through a convenient, fast and secure system. The main objective of this work is the design and implementation of a carpool system that improves some important aspects of previous systems, focusing on trust between users, and on the security of the system. The proposed system guarantees user privacy and measures trust levels through a new reputation algorithm. In addition to this, the proposal has been developed as a mobile application for devices using the Android Open Source Project.

  20. Trust-Based Cooperative Social System Applied to a Carpooling Platform for Smartphones.

    Science.gov (United States)

    Caballero-Gil, Cándido; Caballero-Gil, Pino; Molina-Gil, Jezabel; Martín-Fernández, Francisco; Loia, Vincenzo

    2017-01-27

    One of the worst traffic problems today is the existence of huge traffic jams in almost any big city, produced by the large number of commuters using private cars. This problem has led to an increase in research on the optimization of vehicle occupancy in urban areas as this would help to solve the problem that most cars are occupied by single passengers. The solution of sharing the available seats in cars, known as carpooling, is already available in major cities around the world. However, carpooling is still not considered a safe and reliable solution for many users. With the widespread use of mobile technology and social networks, it is possible to create a trust-based platform to promote carpooling through a convenient, fast and secure system. The main objective of this work is the design and implementation of a carpool system that improves some important aspects of previous systems, focusing on trust between users, and on the security of the system. The proposed system guarantees user privacy and measures trust levels through a new reputation algorithm. In addition to this, the proposal has been developed as a mobile application for devices using the Android Open Source Project.

  1. A modular neural network scheme applied to fault diagnosis in electric power systems.

    Science.gov (United States)

    Flores, Agustín; Quiles, Eduardo; García, Emilio; Morant, Francisco; Correcher, Antonio

    2014-01-01

    This work proposes a new method for fault diagnosis in electric power systems based on neural modules. With this method the diagnosis is performed by assigning a neural module for each type of component comprising the electric power system, whether it is a transmission line, bus or transformer. The neural modules for buses and transformers comprise two diagnostic levels which take into consideration the logic states of switches and relays, both internal and back-up, with the exception of the neural module for transmission lines which also has a third diagnostic level which takes into account the oscillograms of fault voltages and currents as well as the frequency spectrums of these oscillograms, in order to verify if the transmission line had in fact been subjected to a fault. One important advantage of the diagnostic system proposed is that its implementation does not require the use of a network configurator for the system; it does not depend on the size of the power network nor does it require retraining of the neural modules if the power network increases in size, making its application possible to only one component, a specific area, or the whole context of the power system.

  2. A Modular Neural Network Scheme Applied to Fault Diagnosis in Electric Power Systems

    Directory of Open Access Journals (Sweden)

    Agustín Flores

    2014-01-01

    Full Text Available This work proposes a new method for fault diagnosis in electric power systems based on neural modules. With this method the diagnosis is performed by assigning a neural module for each type of component comprising the electric power system, whether it is a transmission line, bus or transformer. The neural modules for buses and transformers comprise two diagnostic levels which take into consideration the logic states of switches and relays, both internal and back-up, with the exception of the neural module for transmission lines which also has a third diagnostic level which takes into account the oscillograms of fault voltages and currents as well as the frequency spectrums of these oscillograms, in order to verify if the transmission line had in fact been subjected to a fault. One important advantage of the diagnostic system proposed is that its implementation does not require the use of a network configurator for the system; it does not depend on the size of the power network nor does it require retraining of the neural modules if the power network increases in size, making its application possible to only one component, a specific area, or the whole context of the power system.

  3. Development of energy storage system for DC electric rolling stock applying electric double layer capacitor

    Energy Technology Data Exchange (ETDEWEB)

    Sekijima, Y.; Kudo, Y.; Inui, M. [Central Japan Railway Co., Aichi (Japan); Monden, Y.; Toda, S.; Aoyama, I. [Toshiba Corp., Tokyo (Japan)

    2006-07-01

    This paper provided details of an energy storage system designed for use with DC electric rolling stock through the application of an electric double layer capacitor (EDLC). The EDLC was selected due to its long life-span and its low operational costs. Testing was conducted to assess the system's basic control function, acceleration using stored energy, and behaviour during regenerative brake failure. A control circuit chip was used in the DC electric rolling stock on an inverter of the energy storage system. Tests confirmed that the control method was effective for actual rolling stocks. A full-scale energy storage system for installation on series 313 locomotives was then constructed. Braking energy was generated only from a regenerative brake. In case of brake failure, braking energy was generated from an air brake was well as an electric brake. Data from a field test conducted at the Tokaido and Chuo railway lines showed a capacity of 0.6 kWh. The EDLC was used to reduce peak air brake energy. It was concluded that storing 0.28 kW of brake energy in the EDLC can reduce peaks of air brake energy in high speed ranges. Experimental equipment was used to confirm use of the system with 0.56 kWh of EDLC, the average energy of air brake used in regenerative energy failure. 1 tab., 10 figs.

  4. Large-timestep techniques for particle-in-cell simulation of systems with applied fields that vary rapidly in space

    International Nuclear Information System (INIS)

    Friedman, A.; Grote, D.P.

    1996-10-01

    Under conditions which arise commonly in space-charge-dominated beam applications, the applied focusing, bending, and accelerating fields vary rapidly with axial position, while the self-fields (which are, on average, comparable in strength to the applied fields) vary smoothly. In such cases it is desirable to employ timesteps which advance the particles over distances greater than the characteristic scales over which the applied fields vary. Several related concepts are potentially applicable: sub-cycling of the particle advance relative to the field solution, a higher-order time-advance algorithm, force-averaging by integration along approximate orbits, and orbit-averaging. We report on our investigations into the utility of such techniques for systems typical of those encountered in accelerator studies for heavy-ion beam-driven inertial fusion

  5. Arms applied to the communications system at the Kourou space centre

    International Nuclear Information System (INIS)

    Gerez Martin, L.; Garcia de la Sen, R.

    1993-01-01

    The REMUS (Roseau d'Entreprise MUltiService) has been designed to cover present and future communications needs which are associated with daily operation of the Guyanese Space Centre (GSC). This communications network will facilitate data exchange, contain the data (RSD) and voice network, and paging (RRP), convoy (RCV) and telephony (RSV) systems. The main objectives of the study were: 1. To assess system availability. 2. To dimension spare parts of the renewal equipment and define the logistic delays to be observed in order to achieve an availability target of: - 99.9% for the RRP, RCV and RSV networks. - 99.9% for the RSD network. The RAMSES program developed by Empresarios Agrupados was used in these calculations, to evaluate system behaviour by means of a Monte Carlo simulation. (author)

  6. Wavelet decomposition and neuro-fuzzy hybrid system applied to short-term wind power

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Jimenez, L.A.; Mendoza-Villena, M. [La Rioja Univ., Logrono (Spain). Dept. of Electrical Engineering; Ramirez-Rosado, I.J.; Abebe, B. [Zaragoza Univ., Zaragoza (Spain). Dept. of Electrical Engineering

    2010-03-09

    Wind energy has become increasingly popular as a renewable energy source. However, the integration of wind farms in the electrical power systems presents several problems, including the chaotic fluctuation of wind flow which results in highly varied power generation from a wind farm. An accurate forecast of wind power generation has important consequences in the economic operation of the integrated power system. This paper presented a new statistical short-term wind power forecasting model based on wavelet decomposition and neuro-fuzzy systems optimized with a genetic algorithm. The paper discussed wavelet decomposition; the proposed wind power forecasting model; and computer results. The original time series, the mean electric power generated in a wind farm, was decomposing into wavelet coefficients that were utilized as inputs for the forecasting model. The forecasting results obtained with the final models were compared to those obtained with traditional forecasting models showing a better performance for all the forecasting horizons. 13 refs., 1 tab., 4 figs.

  7. Family self-tailoring: Applying a systems approach to improving family healthy living behaviors.

    Science.gov (United States)

    Moore, Shirley M; Jones, Lenette; Alemi, Farrokh

    2016-01-01

    The adoption and maintenance of healthy living behaviors by individuals and families is a major challenge. We describe a new model of health behavior change, SystemCHANGE (SC), which focuses on the redesign of family daily routines using system improvement methods. In the SC intervention, families are taught a set of skills to engage in a series of small, family self-designed experiments to test ideas to change their daily routines. The family system-oriented changes brought about by these experiments build healthy living behaviors into family daily routines so that these new behaviors happen as a matter of course, despite wavering motivation, willpower, or personal effort on the part of individuals. Case stories of the use of SC to improve family healthy living behaviors are provided. Results of several pilot tests of SC indicate its potential effectiveness to change health living behaviors across numerous populations. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. An Encoding Technique for Multiobjective Evolutionary Algorithms Applied to Power Distribution System Reconfiguration

    Directory of Open Access Journals (Sweden)

    J. L. Guardado

    2014-01-01

    Full Text Available Network reconfiguration is an alternative to reduce power losses and optimize the operation of power distribution systems. In this paper, an encoding scheme for evolutionary algorithms is proposed in order to search efficiently for the Pareto-optimal solutions during the reconfiguration of power distribution systems considering multiobjective optimization. The encoding scheme is based on the edge window decoder (EWD technique, which was embedded in the Strength Pareto Evolutionary Algorithm 2 (SPEA2 and the Nondominated Sorting Genetic Algorithm II (NSGA-II. The effectiveness of the encoding scheme was proved by solving a test problem for which the true Pareto-optimal solutions are known in advance. In order to prove the practicability of the encoding scheme, a real distribution system was used to find the near Pareto-optimal solutions for different objective functions to optimize.

  9. Development of a faulty reactivity detection system applying a digital H∞ estimator

    International Nuclear Information System (INIS)

    Suzuki, Katsuo; Suzudo, Tomoaki; Nabeshima, Kunihiko

    2004-01-01

    This paper concerns an application of digital optimal H ∞ estimator to the detection of faulty reactivity in real-time. The detection system, fundamentally based on the reactivity balance method, is composed of three modules, i.e. the net reactivity estimator, the feedback reactivity estimator and the reactivity balance circuit. H ∞ optimal filters are used for these two reactivity estimators, and the nonlinear neutronics are taken into consideration especially for the design of the net reactivity estimator. A series of performance test of the detection system are conducted by using numerical simulations of reactor dynamics with the insertion of a faulty reactivity for an experimental fast breeder reactor JOYO. The system detects the typical artificial reactivity insertions during a few seconds with no stationary offset and the accuracy of 0.1 cent, and is satisfactory for its practical use. (author)

  10. Design of sewage treatment system by applying fuzzy adaptive PID controller

    Science.gov (United States)

    Jin, Liang-Ping; Li, Hong-Chan

    2013-03-01

    In the sewage treatment system, the dissolved oxygen concentration control, due to its nonlinear, time-varying, large time delay and uncertainty, is difficult to establish the exact mathematical model. While the conventional PID controller only works with good linear not far from its operating point, it is difficult to realize the system control when the operating point far off. In order to solve the above problems, the paper proposed a method which combine fuzzy control with PID methods and designed a fuzzy adaptive PID controller based on S7-300 PLC .It employs fuzzy inference method to achieve the online tuning for PID parameters. The control algorithm by simulation and practical application show that the system has stronger robustness and better adaptability.

  11. Comparing Waste-to-Energy technologies by applying energy system analysis

    DEFF Research Database (Denmark)

    Münster, Marie; Lund, Henrik

    2010-01-01

    Even when policies of waste prevention, re-use and recycling are prioritised a fraction of waste will still be left which can be used for energy recovery. This article asks the question: How to utilise waste for energy in the best way seen from an energy system perspective? Eight different Waste......-to-Energy technologies are compared with a focus on fuel efficiency, CO2 reductions and costs. The comparison is carried out by conducting detailed energy system analyses of the present as well as a potential future Danish energy system with a large share of combined heat and power as well as wind power. The study shows...... potential of using waste for the production of transport fuels. Biogas and thermal gasification technologies are hence interesting alternatives to waste incineration and it is recommended to support the use of biogas based on manure and organic waste. It is also recommended to support research...

  12. Early alert system for oscillations detection applied to the Central of Laguna Verde

    International Nuclear Information System (INIS)

    Calleros M, G.; Zapata Y, M.; Avila N, A.; Herrera H, S. F.

    2011-11-01

    The code Early Alert System developed by Engineering of the Reactor of the nuclear power plant of Laguna Verde is presented, showing its reliability like preventive and corrective instrument to external interferences to the reactor core, due to equipment malfunction associated to the typical systems of a nuclear power plant, as those that control the reactor pressure, those that feed water to the reactor, those that control the valves of the main turbine. With this purpose, real cases of application of the System are shown where the results are compared with the independent evaluations carried out by the supplier, observing compatibility in both results. The benefits of the logarithm are discussed in the nuclear industry as soon as in non nuclear ambits. (Author)

  13. An encoding technique for multiobjective evolutionary algorithms applied to power distribution system reconfiguration.

    Science.gov (United States)

    Guardado, J L; Rivas-Davalos, F; Torres, J; Maximov, S; Melgoza, E

    2014-01-01

    Network reconfiguration is an alternative to reduce power losses and optimize the operation of power distribution systems. In this paper, an encoding scheme for evolutionary algorithms is proposed in order to search efficiently for the Pareto-optimal solutions during the reconfiguration of power distribution systems considering multiobjective optimization. The encoding scheme is based on the edge window decoder (EWD) technique, which was embedded in the Strength Pareto Evolutionary Algorithm 2 (SPEA2) and the Nondominated Sorting Genetic Algorithm II (NSGA-II). The effectiveness of the encoding scheme was proved by solving a test problem for which the true Pareto-optimal solutions are known in advance. In order to prove the practicability of the encoding scheme, a real distribution system was used to find the near Pareto-optimal solutions for different objective functions to optimize.

  14. Flow visualization system for wind turbines without blades applied to micro reactors

    International Nuclear Information System (INIS)

    Santos, G.S.B.; Guimarães, L.N.F.; Placco, G.M.

    2017-01-01

    Flow visualization systems is a tool used in science and industry for characterization of projects that operate with drainage. This work presents the design and construction of a flow visualization system for passive turbines used in advanced fast micro reactors. In the system were generated images where it is possible to see the supersonic and transonic flow through the turbine disks. A test bench was assembled to generate images of the interior of the turbine where the flow is supersonic, allowing the study of the behavior of the boundary layer between disks. It is necessary to characterize the boundary layer of this type of turbine because its operation occurs in the transfer of kinetic energy between the fluid and the disks. The images generated, as well as their analyzes are presented as a result of this work

  15. Automatic diameter control system applied to the laser heated pedestal growth technique

    Directory of Open Access Journals (Sweden)

    Andreeta M.R.B.

    2003-01-01

    Full Text Available We described an automatic diameter control system (ADC, for the laser heated pedestal growth technique, that reduces the diameter fluctuations in oxide fibers grown from unreacted and non-sinterized pedestals, to less than 2% of the average fiber diameter, and diminishes the average diameter fluctuation, over the entire length of the fiber, to less than 1%. The ADC apparatus is based on an artificial vision system that controls the pulling speed and the height of the molten zone within a precision of 30 mum. We also show that this system can be used for periodic in situ axial doping the fiber. Pure and Cr3+ doped LaAlO3 and pure LiNbO3 were usedas model materials.

  16. Hardware-software system for simulating and analyzing earthquakes applied to civil structures

    Directory of Open Access Journals (Sweden)

    J. P. Amezquita-Sanchez

    2012-01-01

    Full Text Available The occurrence of recent strong earthquakes, the incessant worldwide movements of tectonic plates and the continuous ambient vibrations caused by traffic and wind have increased the interest of researchers in improving the capacity of energy dissipation to avoid damages to civil structures. Experimental testing of structural systems is essential for the understanding of physical behaviors and the building of appropriate analytic models in order to expose difficulties that may not have been considered in analytical studies. This paper presents a hardware-software system for exciting, monitoring and analyzing simultaneously a structure under earthquake signals and other types of signals in real-time. Effectiveness of the proposed system has been validated by experimental case studies and has been found to be a useful tool in the analysis of earthquake effects on structures.

  17. Validation of neutronic methods applied to the analysis of fast subcritical systems. The MUSE-2 experiments

    International Nuclear Information System (INIS)

    Soule, R.; Salvatores, M.; Jacqmin, R.; Martini, M.; Lebrat, J.F.; Bertrand, P.; Broccoli, U.; Peluso, V.

    1997-01-01

    In the framework of the French SPIN program devoted to the separation and the transmutation of radioactive wastes, the CEA has launched the ISAAC program to investigate the potential of accelerator-driven systems and to provide an experimental validation of the physics characteristics of these systems. The neutronics of the subcritical core needs experimental validation. This can be done by decoupling the problem of the neutron source from the problem of the subcritical medium. Experiments with a well known external source placed in a subcritical medium have been performed in the MASURCA facility. The results confirm the high accuracy achievable with such experiments and the good quality of the ERANOS code system predictions. (author)

  18. Validation of neutronic methods applied to the analysis of fast subcritical systems. The MUSE-2 experiments

    Energy Technology Data Exchange (ETDEWEB)

    Soule, R; Salvatores, M; Jacqmin, R; Martini, M; Lebrat, J F; Bertrand, P [CEA Centre d` Etudes de Cadarache, Service de Physique des Reacteurs et du Cycle, 13 - Saint-Paul-lez-Durance (France); Broccoli, U; Peluso, V

    1998-12-31

    In the framework of the French SPIN program devoted to the separation and the transmutation of radioactive wastes, the CEA has launched the ISAAC program to investigate the potential of accelerator-driven systems and to provide an experimental validation of the physics characteristics of these systems. The neutronics of the subcritical core needs experimental validation. This can be done by decoupling the problem of the neutron source from the problem of the subcritical medium. Experiments with a well known external source placed in a subcritical medium have been performed in the MASURCA facility. The results confirm the high accuracy achievable with such experiments and the good quality of the ERANOS code system predictions. (author)

  19. Applying Open Source Game Engine for Building Visual Simulation Training System of Fire Fighting

    Science.gov (United States)

    Yuan, Diping; Jin, Xuesheng; Zhang, Jin; Han, Dong

    There's a growing need for fire departments to adopt a safe and fair method of training to ensure that the firefighting commander is in a position to manage a fire incident. Visual simulation training systems, with their ability to replicate and interact with virtual fire scenarios through the use of computer graphics or VR, become an effective and efficient method for fire ground education. This paper describes the system architecture and functions of a visual simulated training system of fire fighting on oil storage, which adopting Delat3D, a open source game and simulation engine, to provide realistic 3D views. It presents that using open source technology provides not only the commercial-level 3D effects but also a great reduction of cost.

  20. Core fracture analysis applied to ground water flow systems: Chickamauga Group, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Bittner, E.; Dreier, R.B.

    1989-01-01

    The objective of this study is to correlate hydrologic properties with detailed geologic fabrics and to investigate the influence of a complex geologic setting on ground water systems. The Chickamauga Group (CH) located in Bethel Valley on the DOE Oak Ridge Reservation is comprised of limestones and interbedded shales. Five core holes (CH 1-5), oriented across strike, provide a cross section of the CH and were mapped for fracture density, orientation and cross-cutting relationships as well as lithologic variations. Correlation of structural and lithologic features with downhole geophysical logs and hydraulic conductivity values shows a relationship between lithology, fracture density and increased permeability in an otherwise low-permeability environment. Structures identified as influential in enhancing hydraulic conductivity include contractional bedding plane and tectonic stylolites and extensional fractures. Three sets of extensional fractures are indicated by cross-cutting relationships and various degrees of veining. Hydraulic conductivity values (K) for the five wells indicate two ground water flow systems in the valley. A shallow system (up to 150 feet deep) shows a range in K from 10E-4 centimeters per second to 10E-6 centimeters per second. Shallow horizons show more open fractures than are observed at depth, and these fractures appear to control the enhanced K in the shallow system. A subhorizontal interface that is not defined by pre-existing structures or a stratigraphic horizon separates the two flow systems. The deeper system ranges in K values from 10E-9 centimeters per second to 10E-5 centimeters per second. The higher K values at depth correspond to increased fracture density at lithologic contacts, zones of tectonic stylolitization and partially veined extension fractures. 11 refs., 11 figs., 2 tabs

  1. Neuro-fuzzy models for systems identification applied to the operation of nuclear power plants

    International Nuclear Information System (INIS)

    Alves, Antonio Carlos Pinto Dias

    2000-09-01

    A nuclear power plant has a myriad of complex system and sub-systems that, working cooperatively, make the control of the whole plant. Nevertheless their operation be automatic most of the time, the integral understanding of their internal- logic can be away of the comprehension of even experienced operators because of the poor interpretability those controls offer. This difficulty does not happens only in nuclear power plants but in almost every a little more complex control system. Neuro-fuzzy models have been used for the last years in a attempt of suppress these difficulties because of their ability of modelling in linguist form even a system which behavior is extremely complex. This is a very intuitive human form of interpretation and neuro-fuzzy model are gathering increasing acceptance. Unfortunately, neuro-fuzzy models can grow up to become of hard interpretation because of the complexity of the systems under modelling. In general, that growing occurs in function of redundant rules or rules that cover a very little domain of the problem. This work presents an identification method for neuro-fuzzy models that not only allows models grow in function of the existent complexity but that beforehand they try to self-adapt to avoid the inclusion of new rules. This form of construction allowed to arrive to highly interpretative neuro-fuzzy models even of very complex systems. The use of this kind of technique in modelling the control of the pressurizer of a PWR nuclear power plant allowed verify its validity and how neuro-fuzzy models so built can be useful in understanding the automatic operation of a nuclear power plant. (author)

  2. Formal methods applied to industrial complex systems implementation of the B method

    CERN Document Server

    Boulanger, Jean-Louis

    2014-01-01

    This book presents real-world examples of formal techniques in an industrial context. It covers formal methods such as SCADE and/or the B Method, in various fields such as railways, aeronautics, and the automotive industry. The purpose of this book is to present a summary of experience on the use of "formal methods" (based on formal techniques such as proof, abstract interpretation and model-checking) in industrial examples of complex systems, based on the experience of people currently involved in the creation and assessment of safety critical system software. The involvement of people from

  3. Hybrid pulse pile-up rejection system as applied to Rutherford backscattering

    International Nuclear Information System (INIS)

    Boie, R.A.; Wildnauer, K.R.

    1977-01-01

    The problems of pulse on pulse pile-up and noise limited pile-up rejectors are considered in detail for Rutherford backscattering spectra. The forms of these spectra allow the distortions from pile-up and the residual pile-up after rejection to be understood via a simple model. Extended calculations allow us to predict the effects quite accurately. A new pile-up rejection system is described. The ''linear'' rejection method is implemented with peak stretchers and advantageously combined with an event counting rejector to provide a versatile high performance system

  4. Applied research of embedded WiFi technology in the motion capture system

    Science.gov (United States)

    Gui, Haixia

    2012-04-01

    Embedded wireless WiFi technology is one of the current wireless hot spots in network applications. This paper firstly introduces the definition and characteristics of WiFi. With the advantages of WiFi such as using no wiring, simple operation and stable transmission, this paper then gives a system design for the application of embedded wireless WiFi technology in the motion capture system. Also, it verifies the effectiveness of design in the WiFi-based wireless sensor hardware and software program.

  5. Wavelet based artificial neural network applied for energy efficiency enhancement of decoupled HVAC system

    International Nuclear Information System (INIS)

    Jahedi, G.; Ardehali, M.M.

    2012-01-01

    Highlights: ► In HVAC systems, temperature and relative humidity are coupled and dynamic mathematical models are non-linear. ► A wavelet-based ANN is used in series with an infinite impulse response filter for self tuning of PD controller. ► Energy consumption is evaluated for a decoupled bi-linear HVAC system with variable air volume and variable water flow. ► Substantial enhancement in energy efficiency is realized, when the gain coefficients of PD controllers are tuned adaptively. - Abstract: Control methodologies could lower energy demand and consumption of heating, ventilating and air conditioning (HVAC) systems and, simultaneously, achieve better comfort conditions. However, the application of classical controllers is unsatisfactory as HVAC systems are non-linear and the control variables such as temperature and relative humidity (RH) inside the thermal zone are coupled. The objective of this study is to develop and simulate a wavelet-based artificial neural network (WNN) for self tuning of a proportional-derivative (PD) controller for a decoupled bi-linear HVAC system with variable air volume and variable water flow responsible for controlling temperature and RH of a thermal zone, where thermal comfort and energy consumption of the system are evaluated. To achieve the objective, a WNN is used in series with an infinite impulse response (IIR) filter for faster and more accurate identification of system dynamics, as needed for on-line use and off-line batch mode training. The WNN-IIR algorithm is used for self-tuning of two PD controllers for temperature and RH. The simulation results show that the WNN-IIR controller performance is superior, as compared with classical PD controller. The enhancement in efficiency of the HVAC system is accomplished due to substantially lower consumption of energy during the transient operation, when the gain coefficients of PD controllers are tuned in an adaptive manner, as the steady state setpoints for temperature and

  6. A reliability centered maintenance model applied to the auxiliary feedwater system of a nuclear power plant

    International Nuclear Information System (INIS)

    Araujo, Jefferson Borges

    1998-01-01

    The main objective of maintenance in a nuclear power plant is to assure that structures, systems and components will perform their design functions with reliability and availability in order to obtain a safety and economic electric power generation. Reliability Centered Maintenance (RCM) is a method of systematic review to develop or optimize Preventive Maintenance Programs. This study presents the objectives, concepts, organization and methods used in the development of RCM application to nuclear power plants. Some examples of this application are included, considering the Auxiliary Feedwater System of a generic two loops PWR nuclear power plant of Westinghouse design. (author)

  7. System for calibration of instruments of x-ray measurement (CIR-X) applying the PGCS

    International Nuclear Information System (INIS)

    Gaytan G, E.; Rivero G, T.; Cruz E, P.; Tovar M, V.M.; Vergara M, F.J.

    2007-01-01

    The Department of Metrology of Ionizing Radiations of the ININ carries out calibration of instruments for X-ray measurement that determine the operation parameters in X-ray diagnostic machines of the health and private sectors. To facilitate this task, the Department of Automation and Instrumentation developed a system for acquisition and signals processing coming from a reference voltage divider with traceability at NIST that is connected directly to the X-rays tube. The system is integrated by the X-ray unit, the X-ray measurement equipment Dynalizer IIIU of RADCAL, a data acquisition card, a personal computer and the acquisition software and signals processing. (Author)

  8. An Assessment Tool applied to Manure Management Systems using Innovative Technologies

    DEFF Research Database (Denmark)

    Sørensen, Claus Aage Grøn; Jacobsen, B.H.; Sommer, Sven Gjedde

    2003-01-01

    of operational and cost-effective animal manure handling technologies. An assessment tool covering the whole chain of the manure handling system from the animal houses to the field has been developed. The tool enables a system-oriented evaluation of labour demand, machinery capacity and costs related......In Denmark, stringent new regulations, placing strict time limits on manure application and setting thresholds for nitrogen utilisation, have been imposed in order to increase the efficiency of uptake of plant nutrients from manure. An important factor in meeting these requirements is the use...

  9. The non-ideal associated species model applied to the system copper-indium

    International Nuclear Information System (INIS)

    Kellogg, H.H.

    1991-01-01

    The liquid copper-indium system displays complex thermochemical behavior. Deviations from Raoult's law change from positive to negative, and the integral heat of mixing also varies from positive to strongly negative and is markedly dependent on temperature. This behavior was successfully modelled, over the entire composition range and for a temperature range of 400 K, using the non-ideal associated-species concept, with InCu 3 as the associated species. Independent evidence exists for association at the composition InCu 3 , from measurements of magnetic susceptibility, electrical resistivity and Hall effect. In this paper, the applicability of the model to other systems is discussed

  10. BBRV post-tensioning systems as applied to reactor containments and prestressed concrete pressure vessels

    International Nuclear Information System (INIS)

    Thorpe, W.; Speck, F.E.

    1976-01-01

    Nuclear containments and pressure vessels can be post-tensioned by using two basically different methods: tendons and winding. The fundamental differences between the two concepts are shown by introductory examples. A discussion of tendon units, usually lying in the range 4000 to 10,000 kN, is followed by a detailed presentation of the BBRV winding system. After giving a short comment to factors influencing the choice of a post-tensioning system the authors discuss specific aspects of some application groups: cable layout with containments and pressure vessels, conditions for a wrapped design, corrosion protection. (author)

  11. A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

    Directory of Open Access Journals (Sweden)

    Helmut J. Holl

    2009-01-01

    Full Text Available The discretisation of rotordynamic systems usually results in a high number of coordinates, so the computation of the solution of the equations of motion is very time consuming. An efficient semianalytic time-integration method combined with a substructure technique is given, which accounts for nonsymmetric matrices and local nonlinearities. The partitioning of the equation of motion into two substructures is performed. Symmetric and linear background systems are defined for each substructure. The excitation of the substructure comes from the given excitation force, the nonlinear restoring force, the induced force due to the gyroscopic and circulatory effects of the substructure under consideration and the coupling force of the substructures. The high effort for the analysis with complex numbers, which is necessary for nonsymmetric systems, is omitted. The solution is computed by means of an integral formulation. A suitable approximation for the unknown coordinates, which are involved in the coupling forces, has to be introduced and the integration results in Green's functions of the considered substructures. Modal analysis is performed for each linear and symmetric background system of the substructure. Modal reduction can be easily incorporated and the solution is calculated iteratively. The numerical behaviour of the algorithm is discussed and compared to other approximate methods of nonlinear structural dynamics for a benchmark problem and a representative example.

  12. Sustainability Assessment of Power Generation Systems by Applying Exergy Analysis and LCA Methods

    NARCIS (Netherlands)

    Stougie, L.; van der Kooi, H.J.; Valero Delgado, A.

    2015-01-01

    The selection of power generation systems is important when striving for a more sustainable society. However, the results of environmental, economic and social sustainability assessments are subject to new insights into the calculation methods and to changing needs, economic conditions and societal

  13. Systems Thinking Tools as Applied to Community-Based Participatory Research: A Case Study

    Science.gov (United States)

    BeLue, Rhonda; Carmack, Chakema; Myers, Kyle R.; Weinreb-Welch, Laurie; Lengerich, Eugene J.

    2012-01-01

    Community-based participatory research (CBPR) is being used increasingly to address health disparities and complex health issues. The authors propose that CBPR can benefit from a systems science framework to represent the complex and dynamic characteristics of a community and identify intervention points and potential "tipping points."…

  14. Compensation methods applied in current control schemes for large AC drive systems

    DEFF Research Database (Denmark)

    Rus, D. C.; Preda, N. S.; Teodorescu, Remus

    2012-01-01

    The paper deals with modified PI current control structures for large AC drive systems which use surface mounted permanent magnet synchronous machines or squirrel-cage induction motors supplied with voltage source inverters. In order to reduce the power losses caused by high frequency switching...

  15. FZKA, Department of Applied Systems Analysis. R + D activities in 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Department worked in the fields of technology assessment, marterials flow analysis, and socioeconomic environmental research. The characteristic feature of AFAS work is its systems-analytical approach and the interdisciplinary cooperation between scientists, engineers, economists and social scientists. (orig./HP) [de

  16. Course Modularization Applied: The Interface System and Its Implications For Sequence Control and Data Analysis.

    Science.gov (United States)

    Schneider, E. W.

    The Interface System is a comprehensive method for developing and managing computer-assisted instructional courses or computer-managed instructional courses composed of sets of instructional modules. Each module is defined by one or more behavioral objectives and by a list of prerequisite modules that must be completed successfully before the…

  17. A distributed multiagent system architecture for body area networks applied to healthcare monitoring.

    Science.gov (United States)

    Felisberto, Filipe; Laza, Rosalía; Fdez-Riverola, Florentino; Pereira, António

    2015-01-01

    In the last years the area of health monitoring has grown significantly, attracting the attention of both academia and commercial sectors. At the same time, the availability of new biomedical sensors and suitable network protocols has led to the appearance of a new generation of wireless sensor networks, the so-called wireless body area networks. Nowadays, these networks are routinely used for continuous monitoring of vital parameters, movement, and the surrounding environment of people, but the large volume of data generated in different locations represents a major obstacle for the appropriate design, development, and deployment of more elaborated intelligent systems. In this context, we present an open and distributed architecture based on a multiagent system for recognizing human movements, identifying human postures, and detecting harmful activities. The proposed system evolved from a single node for fall detection to a multisensor hardware solution capable of identifying unhampered falls and analyzing the users' movement. The experiments carried out contemplate two different scenarios and demonstrate the accuracy of our proposal as a real distributed movement monitoring and accident detection system. Moreover, we also characterize its performance, enabling future analyses and comparisons with similar approaches.

  18. Obstruction and uniformity in drip irrigation systems by applying treated wastewater

    Directory of Open Access Journals (Sweden)

    Patrícia Ferreira da Silva

    Full Text Available ABSTRACT The use of wastewater in agriculture is an alternative to control surface water pollution, and helps to promote the rational use of water. Therefore, the objective of this study was to evaluate the obstruction and uniformity of application of treated wastewater in drip irrigation systems. The study was conducted in a greenhouse at the Universidade Federal de Campina Grande. The treatments were composed by the factorial combination of two factors: three types of water (supply water-ABAST, effluent of a constructed wetland system -WETLAND and upflow of anaerobic reactor effluent followed by constructed wetland system -UASB + WETLAND, and two drip irrigation systems (surface and subsurface, set in a completely randomized design, with four replications. The results indicated that the pH, suspended solids, total iron and coliforms of the WETLAND and UASB + WETLAND treatments represented a severe risk of clogging of drippers; the flow of the emitters increased as the service pressure was increased; values of CUC and CUD in surface and subsurface drip were classified as excellent in ABAST and WETLAND treatments. The degree of clogging reduced as pressure under surface and subsurface drip was increased.

  19. The household responsibility system and social change in rural Guizhou, China: applying a cohort approach

    NARCIS (Netherlands)

    Yuan, J.

    2010-01-01

    Since the introduction of the Household Responsibility System (HRS) in 1978, Chinese rural households have experienced many changes. The HRS allows farming households to organize their own agricultural production on contracted lands, enabling them to work more efficiently and get more benefits

  20. The applying of multisensory system to assessment of blood samples by composition of equilibrium gaseous phase

    Directory of Open Access Journals (Sweden)

    T. A. Kuchmenko

    2013-01-01

    Full Text Available In the article discussed the possibility of blood sample’s assessment with the following diagnostic characteristics: "endometriosis", "fibroids", "uterine body cancer" by the signals of multisensor system. It has been found that blood samples can be reliably ranking into groups according to their diagnostic characteristics using the geometry, square of "visual prints" and the sorption effectiveness parameters max ij А.

  1. The Toyota product development system applied to a design management workshop model

    DEFF Research Database (Denmark)

    Thyssen, Mikael Hygum; Emmitt, Stephen; Bonke, Sten

    2008-01-01

    reports the early findings of a research project which aims to develop a workshop method for lean design management in construction through a deeper understanding of the Toyota product development system (TPDS) and value theory in general. Results from a case-study will be presented and a theoretical...

  2. Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

    International Nuclear Information System (INIS)

    Upadhyaya, B.R.; Yan, W.; Henry, G.

    1999-01-01

    A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

  3. Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyaya, B.R.; Yan, W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering; Behravesh, M.M. [Electric Power Research Institute, Palo Alto, CA (United States); Henry, G. [EPRI NDE Center, Charlotte, NC (United States)

    1999-09-01

    A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

  4. Comparison of control systems applied to the handling of radioactive reactor components

    International Nuclear Information System (INIS)

    Robinson, C.; Harris, E.G.; Dyer, P.C.; Williams, J.G.B.

    1985-01-01

    The first generation of nuclear power stations have individual reactors each incorporating complete facilities for servicing components and refuelling. In the later designs, each power station has two reactors which are connected by a central block. This central block contains one set of facilities to service both reactors, but to improve the station capability, some of these are to be replicated. The central block incorporates a hoist well which was used during construction for the accessing of complete components. On completion of this work, the physical size of the hoist well is such as to permit the incorporation of additional facilities if these are shown to be operationally and economically desirable. Since a number of years of power operation has elapsed, the advantages of back-fitting to existing fuel-handling facilities has been illustrated. Since the mechanical arrangements and operating procedures are substantially similar for both the original and new handling facilities, the paper will illustrate the control systems provided for each. The configuration of the system is arranged to have two channels of control which complies with the current standard requirements in the United Kingdom. These requirements are more stringent than when the existing facility was designed and constructed, as described in the relevant sections of the paper. The new system has been designed and is being manufactured to comply with the Central Electricity Generating Board standard for nuclear fuel route interlock and control systems. (author)

  5. Exact Linearization of Nonholonomic System Dynamics Applied to Control of Differentially Driven Soccer Robot

    Czech Academy of Sciences Publication Activity Database

    Grepl, Robert; Lee, B.; Kratochvíl, Ctirad; Šolc, F.; Hrabec, J.

    2008-01-01

    Roč. 15, č. 5 (2008), s. 311-318 ISSN 1802-1484 R&D Projects: GA ČR GA101/06/0063 Institutional research plan: CEZ:AV0Z20760514 Keywords : nonholonomic system dynamics * soccer robot Subject RIV: JD - Computer Applications, Robotics

  6. Real time reinforcement learning control of dynamic systems applied to an inverted pendulum

    NARCIS (Netherlands)

    van Luenen, W.T.C.; van Luenen, W.T.C.; Stender, J.; Addis, T.

    1990-01-01

    Describes work started in order to investigate the use of neural networks for application in adaptive or learning control systems. Neural networks have learning capabilities and they can be used to realize non-linear mappings. These are attractive features which could make them useful building

  7. Studies on a Foam System of Ultralow Interfacial Tension Applied in Daqing Oilfield after Polymer Flooding

    Directory of Open Access Journals (Sweden)

    Hong-sheng Liu

    2013-01-01

    Full Text Available In order to study the effects of oil displacement by a foam system of ultralow interfacial tension, the interfacial activities and foam properties of a nonionic gemini surfactant (DWS were investigated under Daqing Oilfield reservoir conditions. Injection methods and alternate cycle of the foam system were discussed here on the basis of results from core flow experiments. It was obtained that the surface tension of DWS was approximately 25 mN/m, and ultralow interfacial tension was reached between oil and DWS with a surfactant concentration between 0.05wt% and 0.4wt%. The binary system showed splendid foam performances, and the preferential surfactant concentration was 0.3wt% with a polymer concentration of 0.2wt%. When gas and liquid were injected simultaneously, flow control capability of the foam reached its peak at the gas-liquid ratio of 3 : 1. Enhanced oil recovery factor of the binary foam system exceeded 10% in a parallel natural cores displacement after polymer flooding.

  8. Advanced electromagnetic modeling applied to anti-vibration systems for high precision and automotive applications

    NARCIS (Netherlands)

    Janssen, J.L.G.; Gysen, B.L.J.; Paulides, J.J.H.; Lomonova, E.

    2012-01-01

    This paper presents the application of two (semi-) analytical modeling techniques to the design of anti-vibration systems. Both methods are based on the direct solution of the Laplace and Poisson equations in terms of the scalar or magnetic vector potential. The first technique, the surface charge

  9. Deaf Effect for Risk Warnings: A Causal Examination applied to Information Systems Projects

    NARCIS (Netherlands)

    A.L.P. Nuijten (Arno)

    2012-01-01

    textabstractEscalation of commitment to a chosen course of action is a phenomenon that shows for example when failing strategic Information Systems (IS) projects are continued for much too long. With this study we contribute to the explanation of why managers (Project Owners) respond with the Deaf

  10. A Method for Indexing Axiomatic Independence Applied to Recongfigurable Manufaturing Systems

    NARCIS (Netherlands)

    Edwin Smulders; Jan Gerritsen; Bert van Huijgevoort; Ing. Erik Puik; Darek Ceglarek

    2013-01-01

    Modern manufacturing has to deal with global competition, in which customers have high purchasing power. Production efficiency and rapid response to customer demand are dominant conditions for enterprises to stay successful. Reconfigurable Manufacturing Systems (RMSs) are designed to have a modular

  11. Uncertainty modelling and structured singular value computation applied to an electro-mechanical system

    NARCIS (Netherlands)

    Steinbuch, M.; Terlouw, J.C.; Bosgra, O.H.; Smit, S.G.

    1992-01-01

    The investigation of closed-loop systems subject to model perturbations is an important issue to assure stability robustness of a control design. A large variety of model perturbations can be described by norm-bounded uncertainty models. A general approach for modelling structured complex and

  12. A novel straightness measurement system applied to the position monitoring of large Particle Physics Detectors

    CERN Document Server

    Goudard, R; Ribeiro, R; Klumb, F

    1999-01-01

    The Compact Muon Solenoid experiment, CMS, is one of the two general purpose experiments foreseen to operate at the Large Hadron Collider, LHC, at CERN, the European Laboratory for Particle Physics. The experiment aims to study very high energy collisions of proton beams. Investigation of the most fundamental properties of matter, in particular the study of the nature of the electroweak symmetry breaking and the origin of mass, is the experiment scope. The central Tracking System, a six meter long cylinder with 2.4 m diameter, will play a major role in all physics searches of the CMS experiment. Its performance depends upon the intrinsic detector performance, on the stability of the supporting structure and on the overall survey, alignment and position monitoring system. The proposed position monitoring system is based on a novel lens-less laser straightness measurement method able to detect deviations from a nominal position of all structural elements of the Central Tracking system. It is based on the recipr...

  13. High frequency statistical energy analysis applied to fluid filled pipe systems

    NARCIS (Netherlands)

    Beek, P.J.G. van; Smeulers, J.P.M.

    2013-01-01

    In pipe systems, carrying gas with high velocities, broadband turbulent pulsations can be generated causing strong vibrations and fatigue failure, called Acoustic Fatigue. This occurs at valves with high pressure differences (i.e. chokes), relief valves and obstructions in the flow, such as sharp

  14. Evaluation of Linear and Non-Linear Control Schemes Applied to a Hydraulic Servo System

    DEFF Research Database (Denmark)

    Andersen, Torben Ole; Hansen, Michael Rygaard; Pedersen, Henrik Clemmensen

    2005-01-01

    Due to the innovation of low-cost electronics such as sensors, microcontrollers etc., the focus on highperformance motion control is increasing. This work focuses on position control of single-input single-output hydraulic servo-systems in general. A hydraulically actuated robotic manipulator...

  15. Toward a System of Total Quality Management: Applying the Deming Approach to the Education Setting.

    Science.gov (United States)

    McLeod, Willis B.; And Others

    1992-01-01

    Recently, the Petersburg (Virginia) Public Schools have moved away from a highly centralized organizational structure to a Total Quality Management system featuring shared decision making and school-based management practices. The district was guided by Deming's philosophy that all stakeholders should be involved in defining the level of products…

  16. Microeconomic theory and computation applying the maxima open-source computer algebra system

    CERN Document Server

    Hammock, Michael R

    2014-01-01

    This book provides a step-by-step tutorial for using Maxima, an open-source multi-platform computer algebra system, to examine the economic relationships that form the core of microeconomics in a way that complements traditional modeling techniques.

  17. A comparison between different error modeling of MEMS applied to GPS/INS integrated systems.

    Science.gov (United States)

    Quinchia, Alex G; Falco, Gianluca; Falletti, Emanuela; Dovis, Fabio; Ferrer, Carles

    2013-07-24

    Advances in the development of micro-electromechanical systems (MEMS) have made possible the fabrication of cheap and small dimension accelerometers and gyroscopes, which are being used in many applications where the global positioning system (GPS) and the inertial navigation system (INS) integration is carried out, i.e., identifying track defects, terrestrial and pedestrian navigation, unmanned aerial vehicles (UAVs), stabilization of many platforms, etc. Although these MEMS sensors are low-cost, they present different errors, which degrade the accuracy of the navigation systems in a short period of time. Therefore, a suitable modeling of these errors is necessary in order to minimize them and, consequently, improve the system performance. In this work, the most used techniques currently to analyze the stochastic errors that affect these sensors are shown and compared: we examine in detail the autocorrelation, the Allan variance (AV) and the power spectral density (PSD) techniques. Subsequently, an analysis and modeling of the inertial sensors, which combines autoregressive (AR) filters and wavelet de-noising, is also achieved. Since a low-cost INS (MEMS grade) presents error sources with short-term (high-frequency) and long-term (low-frequency) components, we introduce a method that compensates for these error terms by doing a complete analysis of Allan variance, wavelet de-nosing and the selection of the level of decomposition for a suitable combination between these techniques. Eventually, in order to assess the stochastic models obtained with these techniques, the Extended Kalman Filter (EKF) of a loosely-coupled GPS/INS integration strategy is augmented with different states. Results show a comparison between the proposed method and the traditional sensor error models under GPS signal blockages using real data collected in urban roadways.

  18. A Comparison between Different Error Modeling of MEMS Applied to GPS/INS Integrated Systems

    Directory of Open Access Journals (Sweden)

    Fabio Dovis

    2013-07-01

    Full Text Available Advances in the development of micro-electromechanical systems (MEMS have made possible the fabrication of cheap and small dimension accelerometers and gyroscopes, which are being used in many applications where the global positioning system (GPS and the inertial navigation system (INS integration is carried out, i.e., identifying track defects, terrestrial and pedestrian navigation, unmanned aerial vehicles (UAVs, stabilization of many platforms, etc. Although these MEMS sensors are low-cost, they present different errors, which degrade the accuracy of the navigation systems in a short period of time. Therefore, a suitable modeling of these errors is necessary in order to minimize them and, consequently, improve the system performance. In this work, the most used techniques currently to analyze the stochastic errors that affect these sensors are shown and compared: we examine in detail the autocorrelation, the Allan variance (AV and the power spectral density (PSD techniques. Subsequently, an analysis and modeling of the inertial sensors, which combines autoregressive (AR filters and wavelet de-noising, is also achieved. Since a low-cost INS (MEMS grade presents error sources with short-term (high-frequency and long-term (low-frequency components, we introduce a method that compensates for these error terms by doing a complete analysis of Allan variance, wavelet de-nosing and the selection of the level of decomposition for a suitable combination between these techniques. Eventually, in order to assess the stochastic models obtained with these techniques, the Extended Kalman Filter (EKF of a loosely-coupled GPS/INS integration strategy is augmented with different states. Results show a comparison between the proposed method and the traditional sensor error models under GPS signal blockages using real data collected in urban roadways.

  19. Systemically applied insecticides for treatment of erythrina gall wasp, quadrastichus erythrinae kim hymenoptera: Eulophidae

    Science.gov (United States)

    Doccola, J.J.; Smith, S.L.; Strom, B.L.; Medeiros, A.C.; Von Allmen, E.

    2009-01-01

    Abstract The erythrina gall wasp (EGW), believed native to Africa, is a recently described species and now serious invasive pest of Erythrina (coral trees) in tropical and subtropical locales. Erythrina are favored ornamental and landscape trees, as well as native members of threatened ecosystems. The EGW is a tiny, highly mobile, highly invasive wasp that deforms (galls) host trees causing severe defoliation and tree death. The first detection of EGW in the United States was in O'ahu, Hawai'i in April 2005. It quickly spread through the Hawai'ian island chain (U.S.) killing ornamental and native Erythrina in as little as two years. At risk are endemic populations of Erythrinaas well as ornamental landscape species in the same genus, the latter of which have already been killed and removed from O'ahu at a cost of more than USD $1 million. Because EGW are so small and spread so quickly, host injury is usually detected before adult wasps are observed, making prophylactic treatments less likely than therapeutic ones. This study evaluates two stem-injected insecticides, imidacloprid (IMA-jet??) and emamectin benzoate, delivered through Arborjet Tree I.V.?? equipment, for their ability to affect E. sandwicensis (wiliwili) canopy demise under severe EGW exposure. IMA-jet, applied at a rate of 0.16 g AI/cm basal diameter (0.4 g AI/in. dia.), was the only effective treatment for maintaining canopy condition of wiliwili trees. Emamectin benzoate, applied at a rate of -0.1 g AI/cm basal diameter (-0.25 g AI/in. dia.), was not effective in this application, although it was intermediate in effect between IMA-jet and untreated trees. The relatively high concentrations of imidacloprid in leaves, and its durability for at least 13 months in native wiliwili growing on a natural, dryland site, suggest that treatment applications against EGW can impact canopy recovery even under suboptimal site and tree conditions. ?? 2009 International Society of Arboriculture.

  20. Applying Human Factors Evaluation and Design Guidance to a Nuclear Power Plant Digital Control System

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Ulrich; Ronald Boring; William Phoenix; Emily Dehority; Tim Whiting; Jonathan Morrell; Rhett Backstrom

    2012-08-01

    The United States (U.S.) nuclear industry, like similar process control industries, has moved toward upgrading its control rooms. The upgraded control rooms typically feature digital control system (DCS) displays embedded in the panels. These displays gather information from the system and represent that information on a single display surface. In this manner, the DCS combines many previously separate analog indicators and controls into a single digital display, whereby the operators can toggle between multiple windows to monitor and control different aspects of the plant. The design of the DCS depends on the function of the system it monitors, but revolves around presenting the information most germane to an operator at any point in time. DCSs require a carefully designed human system interface. This report centers on redesigning existing DCS displays for an example chemical volume control system (CVCS) at a U.S. nuclear power plant. The crucial nature of the CVCS, which controls coolant levels and boration in the primary system, requires a thorough human factors evaluation of its supporting DCS. The initial digital controls being developed for the DCSs tend to directly mimic the former analog controls. There are, however, unique operator interactions with a digital vs. analog interface, and the differences have not always been carefully factored in the translation of an analog interface to a replacement DCS. To ensure safety, efficiency, and usability of the emerging DCSs, a human factors usability evaluation was conducted on a CVCS DCS currently being used and refined at an existing U.S. nuclear power plant. Subject matter experts from process control engineering, software development, and human factors evaluated the DCS displays to document potential usability issues and propose design recommendations. The evaluation yielded 167 potential usability issues with the DCS. These issues should not be considered operator performance problems but rather opportunities

  1. Managing common resources in local and global systems. Applying theory across scales

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Sylvia [ed.

    1997-12-31

    The main point brought forward in this publication is the productiveness of applying theoretical elements, developed within common property resource (CPR) literature, to a broader field of cases on different scales. The common framework for the contributions is a series of seminars held at the Department of Water and Environmental Studies in the spring of 1996, covering expanding work during the last decade on common property resource (CPR) management. It is obvious that there were a broad range of definitions of the concept CPR in the literature. The common pool/property resource concepts are both used, often depending on the resource studied, and authors in this volume have used both terms accordingly. Certain points are raised from empirical cases presented in this volume that are partly missing or not thoroughly stressed in other work in the area of CPR management and which crystallized much clearer when contrasting the situation for cases from different scales. Separate abstracts have been performed for five of the seven contributions

  2. Managing common resources in local and global systems. Applying theory across scales

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Sylvia [ed.

    1998-12-31

    The main point brought forward in this publication is the productiveness of applying theoretical elements, developed within common property resource (CPR) literature, to a broader field of cases on different scales. The common framework for the contributions is a series of seminars held at the Department of Water and Environmental Studies in the spring of 1996, covering expanding work during the last decade on common property resource (CPR) management. It is obvious that there were a broad range of definitions of the concept CPR in the literature. The common pool/property resource concepts are both used, often depending on the resource studied, and authors in this volume have used both terms accordingly. Certain points are raised from empirical cases presented in this volume that are partly missing or not thoroughly stressed in other work in the area of CPR management and which crystallized much clearer when contrasting the situation for cases from different scales. Separate abstracts have been performed for five of the seven contributions

  3. Applying a coupled hydrometeorological simulation system to flash flood forecasting over the Korean Peninsula

    Science.gov (United States)

    Ryu, Young; Lim, Yoon-Jin; Ji, Hee-Sook; Park, Hyun-Hee; Chang, Eun-Chul; Kim, Baek-Jo

    2017-11-01

    In flash flood forecasting, it is necessary to consider not only traditional meteorological variables such as precipitation, evapotranspiration, and soil moisture, but also hydrological components such as streamflow. To address this challenge, the application of high resolution coupled atmospheric-hydrological models is emerging as a promising alternative. This study demonstrates the feasibility of linking a coupled atmospheric-hydrological model (WRF/WRFHydro) with 150-m horizontal grid spacing for flash flood forecasting in Korea. The study area is the Namgang Dam basin in Southern Korea, a mountainous area located downstream of Jiri Mountain (1915 m in height). Under flash flood conditions, the simulated precipitation over the entire basin is comparable to the domain-averaged precipitation, but discharge data from WRF-Hydro shows some differences in the total available water and the temporal distribution of streamflow (given by the timing of the streamflow peak following precipitation), compared to observations. On the basis of sensitivity tests, the parameters controlling the infiltration of excess precipitation and channel roughness depending on stream order are refined and their influence on temporal distribution of streamflow is addressed with intent to apply WRF-Hydro to flash flood forecasting in the Namgang Dam basin. The simulation results from the WRF-Hydro model with optimized parameters demonstrate the potential utility of a coupled atmospheric-hydrological model for forecasting heavy rain-induced flash flooding over the Korean Peninsula.

  4. A system of tradable CO2 permits applied to fuel consumption by motorists

    International Nuclear Information System (INIS)

    Raux, C.; Marlot, G.

    2005-01-01

    Decentralized transferable permit systems in the transport sector can be of interest with regard to reducing greenhouse gas emissions, in spite of anticipated transaction costs. This paper describes a potential application of a domestic market for car fuel consumption permits. The marginal costs of consumption reduction vary sufficiently according to motorists' residential locations to consider permit exchanges. Economic evaluation of this system shows that there are transfers of surplus between the various groups of motorists according to their residential locations. The central government may lose significant revenues when compared with a conventional fuel tax. Lastly, the issue of transaction costs, the benefits and disadvantages in terms of social acceptability and equity are discussed. (author)

  5. A low noise photoelectric signal acquisition system applying in nuclear magnetic resonance gyroscope

    Science.gov (United States)

    Lu, Qilin; Zhang, Xian; Zhao, Xinghua; Yang, Dan; Zhou, Binquan; Hu, Zhaohui

    2017-10-01

    The nuclear magnetic resonance gyroscope serves as a new generation of strong support for the development of high-tech weapons, it solves the core problem that limits the development of the long-playing seamless navigation and positioning. In the NMR gyroscope, the output signal with atomic precession frequency is detected by the probe light, the final crucial photoelectric signal of the probe light directly decides the quality of the gyro signal. But the output signal has high sensitivity, resolution and measurement accuracy for the photoelectric detection system. In order to detect the measured signal better, this paper proposed a weak photoelectric signal rapid acquisition system, which has high SNR and the frequency of responded signal is up to 100 KHz to let the weak output signal with high frequency of the NMR gyroscope can be detected better.

  6. Applying a Cerebellar Model Articulation Controller Neural Network to a Photovoltaic Power Generation System Fault Diagnosis

    Directory of Open Access Journals (Sweden)

    Kuei-Hsiang Chao

    2013-01-01

    Full Text Available This study employed a cerebellar model articulation controller (CMAC neural network to conduct fault diagnoses on photovoltaic power generation systems. We composed a module array using 9 series and 2 parallel connections of SHARP NT-R5E3E 175 W photovoltaic modules. In addition, we used data that were outputted under various fault conditions as the training samples for the CMAC and used this model to conduct the module array fault diagnosis after completing the training. The results of the training process and simulations indicate that the method proposed in this study requires fewer number of training times compared to other methods. In addition to significantly increasing the accuracy rate of the fault diagnosis, this model features a short training duration because the training process only tunes the weights of the exited memory addresses. Therefore, the fault diagnosis is rapid, and the detection tolerance of the diagnosis system is enhanced.

  7. Found in Translation: Applying Lessons from Model Systems to Strigolactone Signaling in Parasitic Plants.

    Science.gov (United States)

    Lumba, Shelley; Subha, Asrinus; McCourt, Peter

    2017-07-01

    Strigolactones (SLs) are small molecules that act as endogenous hormones to regulate plant development as well as exogenous cues that help parasitic plants to infect their hosts. Given that parasitic plants are experimentally challenging systems, researchers are using two approaches to understand how they respond to host-derived SLs. The first involves extrapolating information on SLs from model genetic systems to dissect their roles in parasitic plants. The second uses chemicals to probe SL signaling directly in the parasite Striga hermonthica. These approaches indicate that parasitic plants have co-opted a family of α/β hydrolases to perceive SLs. The importance of this genetic and chemical information cannot be overstated since parasitic plant infestations are major obstacles to food security in the developing world. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Applying of Reliability Techniques and Expert Systems in Management of Radioactive Accidents

    International Nuclear Information System (INIS)

    Aldaihan, S.; Alhbaib, A.; Alrushudi, S.; Karazaitri, C.

    1998-01-01

    Accidents including radioactive exposure have variety of nature and size. This makes such accidents complex situations to be handled by radiation protection agencies or any responsible authority. The situations becomes worse with introducing advanced technology with high complexity that provide operator huge information about system working on. This paper discusses the application of reliability techniques in radioactive risk management. Event tree technique from nuclear field is described as well as two other techniques from nonnuclear fields, Hazard and Operability and Quality Function Deployment. The objective is to show the importance and the applicability of these techniques in radiation risk management. Finally, Expert Systems in the field of accidents management are explored and classified upon their applications

  9. Input Forces Estimation for Nonlinear Systems by Applying a Square-Root Cubature Kalman Filter.

    Science.gov (United States)

    Song, Xuegang; Zhang, Yuexin; Liang, Dakai

    2017-10-10

    This work presents a novel inverse algorithm to estimate time-varying input forces in nonlinear beam systems. With the system parameters determined, the input forces can be estimated in real-time from dynamic responses, which can be used for structural health monitoring. In the process of input forces estimation, the Runge-Kutta fourth-order algorithm was employed to discretize the state equations; a square-root cubature Kalman filter (SRCKF) was employed to suppress white noise; the residual innovation sequences, a priori state estimate, gain matrix, and innovation covariance generated by SRCKF were employed to estimate the magnitude and location of input forces by using a nonlinear estimator. The nonlinear estimator was based on the least squares method. Numerical simulations of a large deflection beam and an experiment of a linear beam constrained by a nonlinear spring were employed. The results demonstrated accuracy of the nonlinear algorithm.

  10. The roles of a decision support system in applying forest ecosystem management in Northeast China

    Institute of Scientific and Technical Information of China (English)

    DAI; Limin; ZHENG; Bofu; Guofan; Shao; ZHOU; Li

    2006-01-01

    Forest ecosystems provide a variety of services and forest ecosystem management (FEM) is an effective approach to maximize the services. Because of the complexity of forest ecosystems, the applications of FEM can be facilitated with decision support systems (DSS) that recognize and incorporate ecological and socio-economic variables. With the rapid development of computation and information technologies, DSS have been advanced in many ways. Traditional forest management within a forestry unit in China is planned on a yearly basis. The planning itself remains primarily a verbal concept as there are no quantitative decision-support tools available to translate the concept into forest management actions. For the purposes of FEM at the management level, a forest management DFF, FORESTAR(R), has been developed under a framework of geographic information system (GIS) and forest models. The paper explained the intelligent modeling mechanisms and demonstrated how the applications of FEM can be strengthened with the applications of FORESTAR(R).

  11. A combined approach of AHP and TOPSIS methods applied in the field of integrated software systems

    Science.gov (United States)

    Berdie, A. D.; Osaci, M.; Muscalagiu, I.; Barz, C.

    2017-05-01

    Adopting the most appropriate technology for developing applications on an integrated software system for enterprises, may result in great savings both in cost and hours of work. This paper proposes a research study for the determination of a hierarchy between three SAP (System Applications and Products in Data Processing) technologies. The technologies Web Dynpro -WD, Floorplan Manager - FPM and CRM WebClient UI - CRM WCUI are multi-criteria evaluated in terms of the obtained performances through the implementation of the same web business application. To establish the hierarchy a multi-criteria analysis model that combines the AHP (Analytic Hierarchy Process) and the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods was proposed. This model was built with the help of the SuperDecision software. This software is based on the AHP method and determines the weights for the selected sets of criteria. The TOPSIS method was used to obtain the final ranking and the technologies hierarchy.

  12. Radiotherapy applied to tumours of the intracranial central nervous systems in the dog

    International Nuclear Information System (INIS)

    Tortereau, Antonin

    2009-01-01

    As domestic animals such as dogs are living older because of a better life quality and better cares, they may more frequently develop tumours in their intracranial central nervous system. In this research thesis, the author addresses this specific topic. He first recalls fundamental physical and biological aspects for the understanding of radiotherapy action mechanisms, and the modalities of such a treatment. He addresses the general study of intracranial central nervous system tumours in dogs: brief recall on anatomic and histological aspects, presentation of their classification and their prevalence, and precise descriptions of their characteristics. In the third part, the author reports clinical and para-clinical data which allow the diagnosis of an intracranial nervous tissue tumour. The last part presents different available therapeutic modalities, more particularly addresses the interest of radiotherapy in neuro-oncology, and compares published results [fr

  13. Advanced dust monitoring system applied to new TRU handling facility of JAERI

    International Nuclear Information System (INIS)

    Yabuta, H.; Shigeta, Y.; Sawahata, K.; Hasegawa, K.

    1993-01-01

    In JAERI, a large, scale multipurpose facility is under construction, which consists of a TRU waste management testing installation, a solution fuel treatment installation and critical assemblies with uranium and/or plutonium solution fuel. The facility is also equipped with a lot of gloveboxes for handling and treatment of solution fuel and hot cells for research on reprocessing process. As there may be a relatively high potential of air contamination, it is important to monitor air contamination effectively and efficiently. An advanced dust monitoring system was introduced for convenience of handling and automatical measurement of filter papers, by developing a filter-holder with an IC memory and a radioactivity measuring device with an automatic filter-holder changing mechanism as a part of a centralized monitoring system with a computer

  14. System of Indicators in the Innovation Management: Business Intelligence Applied to Tourism

    Science.gov (United States)

    Lozada, Dayana; Araque, Francisco; Castillo, Jose Manuel; Salguero, Alberto; Delgado, Cecilia; Noda, Marcia; Hernández, Gilberto

    The work presents an approach to study mechanisms that allows managers the Innovation Management (IM) measurements. It is assumed, as main motivation, the analysis of patterns for the design of an integral system of indicators. A methodology that integrates the thought process, focusing on the Business Intelligence and the Balance Scorecard will be presented. A group of indexes based on the multidimensionality of IM in organizations of the sector of tourism is proposed. To approach this quality it is necessary to contextualize, in the conditions of sectoral operation, the theories, models and systems used in our approach. It has been used intervention methods like experts' criteria, consensus search techniques by means of surveys, consultation of documents, and statistical methods such as analysis of the main components.

  15. Gross Containment Leakage Monitoring System (GCLM) applied to accidental impairment of containment integrity determination

    International Nuclear Information System (INIS)

    Dinu, Camelia; Talpalariu, A.; Constantinescu, G.

    2007-01-01

    The Prioritization of Generic Safety Issues (NUREG-0933 of October 2006), section 1 task II.E.4 item II.E.4.3 recommends that a method of periodic or continuous testing has to be available, in order to detect unknown gross openings in the nuclear power plants containment structure. The Palisades incident and three other incidents are exemplified, when the reactor was operated for about 1.5 years, while the containment isolation valves in a purge system bypass line were unknowingly locked in the open position. It was estimated that the presence of a GCLM system could identify an unknown breach and reduce the expected unavailability of containment due to containment integrity breach events, to a 1.6x10 -3 /year demand. (authors)

  16. A geographic information system applied to a malaria field study in western Kenya.

    Science.gov (United States)

    Hightower, A W; Ombok, M; Otieno, R; Odhiambo, R; Oloo, A J; Lal, A A; Nahlen, B L; Hawley, W A

    1998-03-01

    This paper describes use of the global positioning system (GPS) in differential mode (DGPS) to obtain highly accurate longitudes, latitudes, and altitudes of 1,169 houses, 15 schools, 40 churches, four health care centers, 48 major mosquito breeding sites, 10 borehole wells, seven shopping areas, major roads, streams, the shore of Lake Victoria, and other geographic features of interest associated with a longitudinal study of malaria in 15 villages in western Kenya. The area mapped encompassed approximately 70 km2 and included 42.0 km of roads, 54.3 km of streams, and 15.0 km of lake shore. Location data were entered into a geographic information system for map production and linkage with various databases for spatial analyses. Spatial analyses using parasitologic and entomologic data are presented as examples. Background information on DGPS is presented along with estimates of effort and expense to produce the map information.

  17. Input Forces Estimation for Nonlinear Systems by Applying a Square-Root Cubature Kalman Filter

    Directory of Open Access Journals (Sweden)

    Xuegang Song

    2017-10-01

    Full Text Available This work presents a novel inverse algorithm to estimate time-varying input forces in nonlinear beam systems. With the system parameters determined, the input forces can be estimated in real-time from dynamic responses, which can be used for structural health monitoring. In the process of input forces estimation, the Runge-Kutta fourth-order algorithm was employed to discretize the state equations; a square-root cubature Kalman filter (SRCKF was employed to suppress white noise; the residual innovation sequences, a priori state estimate, gain matrix, and innovation covariance generated by SRCKF were employed to estimate the magnitude and location of input forces by using a nonlinear estimator. The nonlinear estimator was based on the least squares method. Numerical simulations of a large deflection beam and an experiment of a linear beam constrained by a nonlinear spring were employed. The results demonstrated accuracy of the nonlinear algorithm.

  18. Jet Riemann-Lagrange Geometry Applied to Evolution DEs Systems from Economy

    OpenAIRE

    Neagu, Mircea

    2007-01-01

    The aim of this paper is to construct a natural Riemann-Lagrange differential geometry on 1-jet spaces, in the sense of nonlinear connections, generalized Cartan connections, d-torsions, d-curvatures, jet electromagnetic fields and jet Yang-Mills energies, starting from some given non-linear evolution DEs systems modelling economic phenomena, like the Kaldor model of the bussines cycle or the Tobin-Benhabib-Miyao model regarding the role of money on economic growth.

  19. A novel straightness measurement system applied to the position monitoring of large Particle Physics Detectors

    OpenAIRE

    Goudard, R; Price, M J; Ribeiro, R; Klumb, F

    1999-01-01

    The Compact Muon Solenoid experiment, CMS, is one of the two general purpose experiments foreseen to operate at the Large Hadron Collider, LHC, at CERN, the European Laboratory for Particle Physics. The experiment aims to study very high energy collisions of proton beams. Investigation of the most fundamental properties of matter, in particular the study of the nature of the electroweak symmetry breaking and the origin of mass, is the experiment scope. The central Tracking System, a six meter...

  20. New form of the Euler-Bernoulli rod equation applied to robotic systems

    Directory of Open Access Journals (Sweden)

    Filipović Mirjana

    2008-01-01

    Full Text Available This paper presents a theoretical background and an example of extending the Euler-Bernoulli equation from several aspects. Euler-Bernoulli equation (based on the known laws of dynamics should be supplemented with all the forces that are participating in the formation of the bending moment of the considered mode. The stiffness matrix is a full matrix. Damping is an omnipresent elasticity characteristic of real systems, so that it is naturally included in the Euler-Bernoulli equation. It is shown that Daniel Bernoulli's particular integral is just one component of the total elastic deformation of the tip of any mode to which we have to add a component of the elastic deformation of a stationary regime in accordance with the complexity requirements of motion of an elastic robot system. The elastic line equation mode of link of a complex elastic robot system is defined based on the so-called 'Euler-Bernoulli Approach' (EBA. It is shown that the equation of equilibrium of all forces present at mode tip point ('Lumped-mass approach' (LMA follows directly from the elastic line equation for specified boundary conditions. This, in turn, proves the essential relationship between LMA and EBA approaches. In the defined mathematical model of a robotic system with multiple DOF (degree of freedom in the presence of the second mode, the phenomenon of elasticity of both links and joints are considered simultaneously with the presence of the environment dynamics - all based on the previously presented theoretical premises. Simulation results are presented. .