(/sup 3/H)Clonazepam, like (/sup 3/H)flunitrazepam, is a photoaffinity label for the central type of benzodiazepine receptors

Energy Technology Data Exchange (ETDEWEB)

Sieghart, W. (Vienna Univ. (Austria)); Moehler, H. (Hoffmann-La Roche (F.) and Co., Basel (Switzerland))

1982-06-16

(/sup 3/H)Clonazepam, like (/sup 3/H)flunitrazepam, is irreversibly bound to membrane proteins of brain tissue when exposed to UV light. In polyacrylamide gel electrophoresis followed by fluorography, the same pattern of photolabelled proteins was obtained in cerebellum and in hippocampus when either (/sup 3/H)clonazepam or (/sup 3/H)flunitrazepam was used as photoaffinity label. Since (/sup 3/H)clonazepam does not interact with the peripheral type of benzodiazepine binding site present in the brain, these results confirm previous evidence that the proteins photolabelled with (/sup 3/H)flunitrazepam are associated with the central type of benzodiazepine receptor.

Photoaffinity labeling of [3H]flunitrazepam- and [3H]Ro15-4513-bound pellets in rat cerebral cortex and cerebellum

International Nuclear Information System (INIS)

Chiu, T.H.; Yu, Onnfoh; Rosenberg, H.C.

1989-01-01

Irreversible incorporation of [ 3 H]flunitrazepam and [ 3 H]Ro15-4513 into GABA/benzodiazepine receptor subunits was studied by UV/irradiation using ligand-bound membrane pellets from rat cerebral cortical and cerebellar synaptic membranes. Specific incorporation for [ 3 H]flunitrazepam was greater in the pellet than in the suspension. The incorporation was identical for [ 3 H]Ro15-4513 in both pellet and suspension. With the ligand-bound pellets, 50% of the available binding sites were photolabeled by both ligands in cortex and cerebellum. SDS polyacrylamide gel electrophoresis and fluorography of [ 3 H]flunitrazepam photo-labeled receptor revealed the same number of major sites in both brain regions. In contrast, [ 3 H]Ro15-4513 appears to label fewer sites in cortex and cerebellum. Photoaffinity labeling with [ 3 H]flunitrazepam in ligand-bound membrane pellet provides a more selective and reliable method for studying the subunit structure of GABA/benzodiazepine receptor complex

Synthesis of a novel superdisintegrant by starch derivatization with polysuccinimide and its application for the development of Ondansetron fast dissolving tablet.

Science.gov (United States)

Sadeghi, Mozhgan; Hemmati, Salar; Hamishehkar, Hamed

2016-01-01

Disintegrants are the key excipients administered in tablet formulations to boost the decomposition of the tablet into smaller pieces in the gastrointestinal environment, thereby increasing the available surface area and enhancing a more rapid release of the active ingredient. Polysuccinimide (PSI), a biodegradable polymer synthesized from aspartic acid, was reacted with starch and fully assessed by CHN, (1)H-NMR, and FTIR. PSI-grafted starch (PSI-St) was synthesized and applied as a disintegrant in the formulation of a rapidly disintegrating tablet of Ondansetron, a nausea and vomiting medicine. The tablet formulated with the newly developed superdisintegrant was evaluated for hardness, friability, disintegration time, and dissolution rate, and the results were compared with tablets formulated with an identical composition of test formulation differing only in type of disintegrant. Tablets prepared with starch and tablets prepared with sodium starch glycolate (SSG) were used as negative and positive controls, respectively. Dissolution study results indicated that although the onset of disintegration action was faster for SSG than PSI-St, higher amounts of drug were released from tablets formulated from PSI-St than from those formulated from SSG during 10 min. It was concluded that the novel synthesized superdisintegrant has an appropriate potential for the application in the formulation of fast dissolving tablets.

Examination of formulation and process factors on the characteristics of fast dissolving and fast disintegrating tablets manufactured by a direct compression process.

OpenAIRE

Pabari, Ritesh M

2010-01-01

Oral dosage forms are the safest and most convenient dosage forms and of these tablets are the most popular with patients because of their portability, ease and convenience of dose intake and with manufacturers because of their simple and low cost manufacturing process. Fast disintegrating dissolving tablets (FDDTs), a more recent innovation, have gained a great deal of attention particularly for use in various patient groups such as the paediatric, geriatric, travelling patients and patients...

Quality Enhancement by Inclusion Complex Formation of Simvastatin Tablets

Directory of Open Access Journals (Sweden)

Emőke Rédai

2013-08-01

Full Text Available Introduction: Simvastatin is an inhibitor of hydroxy-methyl-glutaryl-coenzyme A reductase, used in the treatment of hypercholesterolemia. To enhance its bioavailability by inclusion complexation, as host molecule randommethyl-β-cyclodextrin had been used. After evaluating the complexes we chose the kneading product in 1:2 molar ratio for incorporation of 10 mg simvastatin tablets. Materials and methods: We prepared homogenous mixtures of the inclusion complex and some excipients. The tablets were prepared by direct compression. The tablets were evaluated in regard to: weight uniformity, thickness, diameter, hardness, friability, disintegration and dissolution profile. Results: Weights are in the range of 196-208 mg, diameter 6.83-6.86 mm, height 3.86-4.01 mm, hardness 78.3-113.1 N, friability 0.75- 1.19 %, disintegration above 15 minutes. The dissolved amounts of simvastatin from the tablets are higher compared to the dissolution of pure simvastatin, but lower than the dissolution of the complex itself. Excipients, like disintegrants and lubricants greatly influence the dissolution properties of the tablets. Conclusions: According to our results, tablets containing inclusion complex of simvastatin exhibit better solubility, according to the dissolved amount of simvastatin, than pure drug alone. Proper physical parameters of the tablets are obtained by application of 5 % Primellose

Formulation of Fast-Dissolving Tablets of Promethazine Theoclate

African Journals Online (AJOL)

Erah

Tropical Journal of Pharmaceutical Research October 2010; 9 (5): 489-497 ... gastrointestinal tract in order to achieve therapeutic success. Fast- ... The blends were lubricated with 2. %w/w each ..... Thus, addition of crospovidone to the tablet ...

Fast disintegrating tablets: Opportunity in drug delivery system

Directory of Open Access Journals (Sweden)

Ved Parkash

2011-01-01

Full Text Available Fast disintegrating tablets (FDTs have received ever-increasing demand during the last decade, and the field has become a rapidly growing area in the pharmaceutical industry. Oral drug delivery remains the preferred route for administration of various drugs. Recent developments in the technology have prompted scientists to develop FDTs with improved patient compliance and convenience. Upon introduction into the mouth, these tablets dissolve or disintegrate in the mouth in the absence of additional water for easy administration of active pharmaceutical ingredients. The popularity and usefulness of the formulation resulted in development of several FDT technologies. FDTs are solid unit dosage forms, which disintegrate or dissolve rapidly in the mouth without chewing and water. FDTs or orally disintegrating tablets provide an advantage particularly for pediatric and geriatric populations who have difficulty in swallowing conventional tablets and capsules. This review describes various formulations and technologies developed to achieve fast dissolution/dispersion of tablets in the oral cavity. In particular, this review describes in detail FDT technologies based on lyophilization, molding, sublimation, and compaction, as well as approaches to enhancing the FDT properties, such as spray drying and use of disintegrants. In addition, taste-masking technologies, experimental measurements of disintegration times, and dissolution are also discussed.

Solubility enhancement, physicochemical characterization and formulation of fast-dissolving tablet of nifedipine-betacyclodextrin complexes

Directory of Open Access Journals (Sweden)

Swati Changdeo Jagdale

2012-03-01

Full Text Available The main objective of the study was to enhance the dissolution of nifedipine, a poorly water soluble drug by betacyclodextrin complexation and to study the effect of the preparation method on the in vitro dissolution profile. The stoichiometric ratio determined by phase solubility analysis for inclusion complexation of nifedipine with β-cyclodextrin was 1:1. Binary complex was prepared by different methods and was further characterized using XRD, DSC and FT-IR. A saturation solubility study was carried out to evaluate the increase in solubility of nifedipine. The optimized complex was formulated into fast-dissolving tablets by using the superdisintegrants Doshion P544, pregelatinized starch, crospovidone, sodium starch glycolate and croscarmellose sodium by direct compression. Tablets were evaluated for friability, hardness, weight variation, disintegration and in vitro dissolution. Tablets showed an enhanced dissolution rate compared to pure nifedipine.Este estudo teve por objetivo principal incrementar a dissolução do nifedipino, fármaco pouco solúvel em água, por meio de sua complexação com β-ciclodextrina e estudar o efeito do método de preparação sobre o perfil de dissolução in vitro. A razão estequiométrica, determinada por ensaio de solubilidade de fase, para a complexação de nifedipino por inclusão em β-ciclodextrina foi 1:1. O complexo binário foi preparado por diferentes métodos, sendo caracterizado utilizando-se difratometria de raios X (XRD, calorimetria diferencial de varredura (DSC e espectroscopia no infravermelho com transformada de Fourier (FT-IR. Realizou-se estudo de solubilidade de saturação para avaliar o incremento da solubilidade do nifedipino. O complexo otimizado foi formulado em comprimidos de dissolução rápida preparados por compressão direta, nos quais se utilizaram os superdesintegrantes Doshion P544, amido pré-gelatinizado, crospovidona, amidoglicolato de sódio e croscarmelose s

The Effect of Flunitrazepam (Rohypnol(®) ) on the Development of Chrysomya megacephala (Fabricius, 1794) (Diptera: Calliphoridae) and its Implications for Forensic Entomology.

Science.gov (United States)

Baia, Tainá Costa; Campos, Alessandra; Wanderley, Bruno Mattos Silva; Gama, Renata Antonaci

2016-07-01

This study investigated the potential effects of flunitrazepam (known as "date rape drug") on the developmental cycle of Chrysomya megacephala, an important forensic species, and their possible implications for the calculation of the PMI. A 1050 C. megacephala eggs were divided into five groups with seven replications each. The eggs were placed on artificial diet prepared with four drug concentrations of flunitrazepam (4, 8, 16, and 32 ng/g), besides the control group (prepared with water). Were evaluated the potential effects on development time, weight gain, and mortality during the cycles. The drug had no significant effect on development time or mortality although it did affect the weight of the pupae and adults (Kruskal-Wallis, p Forensic Sciences.

Characterization of absorption enhancers for orally administered therapeutic peptides in tablet formulations - Applying statistical learning

DEFF Research Database (Denmark)

Welling, Søren Havelund

. In the Caco-2 model all reagents are pre-dissolved, and therefore the assay cannot predict critical solubility issues and bile salt interactions in the final tablet formulation. A QSAR solubility model was built to foresee and avoid slow tablet dissolution. Due to enzyme kinetics, slow tablet dissolution...

Formulation and Evaluation of Mouth Dissolving Tablets of Tramadol ...

African Journals Online (AJOL)

Tropical Journal of Pharmaceutical Research May 2014; 13 (5): 669-675. ISSN: 1596-5996 ... Index Medicus, JournalSeek, Journal Citation Reports/Science Edition, Directory of Open Access Journals. (DOAJ) ... lubricated blend was compressed into tablets by ... dissolution medium in order to maintain sink conditions.

Gravimetric Analysis of Bismuth in Bismuth Subsalicylate Tablets: A Versatile Quantitative Experiment for Undergraduate Laboratories

Science.gov (United States)

Davis, Eric; Cheung, Ken; Pauls, Steve; Dick, Jonathan; Roth, Elijah; Zalewski, Nicole; Veldhuizen, Christopher; Coeler, Joel

2015-01-01

In this laboratory experiment, lower- and upper-division students dissolved bismuth subsalicylate tablets in acid and precipitated the resultant Bi[superscript 3+] in solution with sodium phosphate for a gravimetric determination of bismuth subsalicylate in the tablets. With a labeled concentration of 262 mg/tablet, the combined data from three…

Correlation of dissolution and disintegration results for an immediate-release tablet.

Science.gov (United States)

Nickerson, Beverly; Kong, Angela; Gerst, Paul; Kao, Shangming

2018-02-20

The drug release rate of a rapidly dissolving immediate-release tablet formulation with a highly soluble drug is proposed to be controlled by the disintegration rate of the tablet. Disintegration and dissolution test methods used to evaluate the tablets were shown to discriminate manufacturing process differences and compositionally variant tablets. In addition, a correlation was established between disintegration and dissolution. In accordance with ICH Q6A, this work demonstrates that disintegration in lieu of dissolution is suitable as the drug product quality control method for evaluating this drug product. Copyright © 2017 Elsevier B.V. All rights reserved.

Torsemide Fast Dissolving Tablets: Development, Optimization Using Box-Bhenken Design and Response Surface Methodology, In Vitro Characterization, and Pharmacokinetic Assessment.

Science.gov (United States)

El-Shenawy, Ahmed A; Ahmed, Mahmoud M; Mansour, Heba F; Abd El Rasoul, Saleh

2017-08-01

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y 1 ), percentage friability (Y 2 ), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC 0-12 ) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

Formulation and Evaluation of Mouth Dissolving Tablets of Tramadol ...

African Journals Online (AJOL)

Results: The tablet formulation prepared with Pharmaburst (F13) showed good flow properties, low disintegration time (15 s) and improved drug release (99 % at 30 min) compared with those of the reference product (88 % at 30 min) and passed 6 months accelerated stability test. Bioequivalence of the test product with that ...

Embolic stroke associated with injection of buprenorphine tablets.

Science.gov (United States)

Lim, C C Tchoyoson; Lee, Sze Haur; Wong, Yee-Choon; Hui, Francis

2009-09-15

Drug users who crush, dissolve, and inject buprenorphine tablets parenterally may be at risk of severe thromboembolic complications or death. We describe patients with neurologic complications after injecting buprenorphine tablets. Brain MRI including diffusion-weighted imaging (DWI) in patients admitted to the neurologic department after injecting buprenorphine tablets were reviewed. Seven men had neurologic complications after buprenorphine tablet injection. In 5 patients, multiple small scattered hyperintense lesions were detected on DWI in the cortex, white matter, and basal ganglia of the cerebral hemisphere; one patient had a single small lesion. The side of MRI abnormality corresponded to the side of needle marks on the neck except in one patient who had bilateral injections. One patient, who denied injecting into the neck, had DWI abnormalities in the middle cerebral artery territory on one side and occlusion of the ipsilateral internal carotid artery. Buprenorphine tablets can be intentionally or inadvertently injected into the carotid artery, causing a characteristic appearance on diffusion-weighted imaging, consistent with embolic cerebral infarction.

Spectrophotometric Determination of Cilostazol in Tablet Dosage Form

African Journals Online (AJOL)

Purpose: To develop simple, rapid and selective spectrophotometric methods for the determination of cilostazol in tablet dosage form. Methods: Cilostazol was dissolved in 50 % methanol and its absorbance was scanned by ultraviolet (UV) spectrophotometry. Both linear regression equation and standard absorptivity were ...

FAST DISSOLVING THIN STRIPS: AN EMERGING WAY FOR ORAL DRUG DELIVERY

OpenAIRE

Anjali Joshi* and Ganesh Kumar

2018-01-01

Various pharmaceutical dosage form are present in the market but all of the dosage forms possess some drawback most common is patient incompliance which is seen in all age groups. So from last few years focus is done on developing such dosage form which enhances safety, efficacy and patient compliance. In this manner, in late 1970 fast-dissolving drug delivery system came in existence which includes Fast dissolving tablets and fast dissolving thin strips means those dosage form which dissolve...

PENGARUH SUHU DAN KELEMBABAN UDARA TERHADAP PERUBAHAN MUTU TABLET EFFERVESCEN SARI BUAH SELAMA PENYIMPANAN [Influence of Temperature and Relative Humidity on the Quality of Fruit Juice Effervescent Tablet During Storage

Directory of Open Access Journals (Sweden)

Ansar

2011-06-01

Full Text Available The aim of this research was to study the influence of temperature and relative humidity on the quality of the fruit juice effervescent tablet. Sample of the passion fruit effervescent tablet was prepared from passion fruit granular, aspartame, polyetilene glycol, citric acid, and sodium bicarbonate. Variable analyzed was dissolution rate of the tablet during storage. The results indicated that temperature and humidity significantly affect dissolution rate of the fruit juice effervescent tablet. The reason for the decrease in dissolution rate was because at high storage temperature (35oC, sodium bicarbonate was not stable. The bicarbonate amount gradually decreased because it reacted with citric acid. Consequently, when the tablet was dissolved, the reaction between sodium bicarbonate and citric acid was slow. At high relative humidity (85.5% of storage, the reaction occurred prior to the dissolution due to moisture intake.

Enhanced oral bioavailability of felodipine by novel solid self-microemulsifying tablets.

Science.gov (United States)

Jing, Boyu; Wang, Zhiyuan; Yang, Rui; Zheng, Xia; Zhao, Jia; Tang, Si; He, Zhonggui

2016-01-01

The novel self-microemulsifying (SME) tablets were developed to enhance the oral bioavailability of a poor water-soluble drug felodipine (FDP). Firstly, FDP was dissolved in the optimized liquid self-microemusifying drug delivery systems (SMEDDS) containing Miglyol® 812, Cremophor® RH 40, Tween 80 and Transcutol® P, and the mixture was solidified with porous silicon dioxide and crospovidone as adsorbents. Then after combining the solidified powders with other excipients, the solid SME tablets were prepared by wet granulation-compression method. The prepared tablets possessed satisfactory characterization; the droplet size of the SME tablets following self-emulsification in water was nearly equivalent to the liquid SMEDDS (68.4 ± 14.0 and 64.4 ± 12.0 nm); differential scanning calorimetry (DSC) and powder X-ray diffractometry (PXRD) analysis demonstrated that FDP in SME tablets had undergone a polymorphism transition from a crystal form to an amorphous state, which was further confirmed by transmission electron microscopy (TEM). A similar dissolution performance of SME tablets and liquid SMEDDS was also obtained under the sink condition (85% within 10 min), both significantly higher than commercial tablets. The oral bioavailability was evaluated for the SME tablets, liquid SMEDDS and commercial conventional tablets in the fasted beagle dogs. The AUC of FDP from the SME tablets was about 2-fold greater than that of conventional tablets, but no significant difference was found when compared with the liquid SMEDDS. Accordingly, these preliminary results suggest that this formulation approach offers a useful large-scale producing method to prepare the solid SME tablets from the liquid SMEDDS for oral bioavailability equivalent enhancement of poorly soluble FDP.

Influence of barium sulfate X-ray imaging contrast material on properties of floating drug delivery tablets.

Science.gov (United States)

Diós, Péter; Szigeti, Krisztián; Budán, Ferenc; Pócsik, Márta; Veres, Dániel S; Máthé, Domokos; Pál, Szilárd; Dévay, Attila; Nagy, Sándor

2016-12-01

The objective of the study was to reveal the influence of necessarily added barium sulfate (BaSO 4 ) X-ray contrast material on floating drug delivery tablets. Based on literature survey, a chosen floating tablet composition was determined containing HPMC and carbopol 943P as matrix polymers. One-factor factorial design with five levels was created for evaluation of BaSO 4 (X 1 ) effects on experimental parameters of tablets including: floating lag time, total floating time, swelling-, erosion-, dissolution-, release kinetics parameters and X-ray detected volume changes of tablets. Applied concentrations of BaSO 4 were between 0 and 20.0% resulting in remarkable alteration of experimental parameters related especially to flotation. Drastic deterioration of floating lag time and total floating time could be observed above 15.0% BaSO 4 . Furthermore, BaSO 4 showed to increase the integrity of tablet matrix by reducing eroding properties. A novel evaluation of dissolutions from floating drug delivery systems was introduced, which could assess the quantity of drug dissolved from dosage form in floating state. In the cases of tablets containing 20.0% BaSO 4 , only the 40% of total API amount could be dissolved in floating state. In vitro fine resolution X-ray CT imagings were performed to study the volume change and the voxel distributions as a function of HU attenuations by histogram analysis of the images. X-ray detected relative volume change results did not show significant difference between samples. After 24h, all tablets containing BaSO 4 could be segmented, which highlighted the fact that enough BaSO 4 remained in the tablets for their identification. Copyright © 2016 Elsevier B.V. All rights reserved.

ORODISPERSIBLE TABLET: A Patient Friendly Dosage Form (a Review

Directory of Open Access Journals (Sweden)

C. K. Rameesa

2015-03-01

Full Text Available Background: The most common and preferred route of drug administration is through the oral route. Orodispersible tablets are gaining importance among novel oral drug delivery system as they have improved patient compliance and have some additional advantages compared to other formulation. They are also solid unit dosage forms, which disintegrate in the mouth within a minute in the presence of saliva due to superdisintegrants in the formulation. Thus this type of drug delivery helps a proper per oral administration in pediatric and geriatric population where swallowing is a matter of trouble. Various scientists have prepared orodispersible tablets by following various methods. However, the most common method is the direct compression method. Other special methods are Freeze Drying,Tablet Molding, Sublimation, Spray Drying, Mass extrusion, Phase transition process, etc. Since these tablets dissolve directly in the mouth, so, their taste is also an important factor. Various approaches have been taken in order to mask the bitter taste of the drug. A number of scientists have explored several drugs in this field. Like all other solid dosage forms, they are also evaluated in the field of hardness, friability, wetting time, moisture uptake, disintegration test and dissolution test.

The Palatability of Lopinavir and Ritonavir Delivered by an Innovative Freeze-Dried Fast-Dissolving Tablet Formulation

Directory of Open Access Journals (Sweden)

David W. Pittman

2018-01-01

Full Text Available Negative hedonic sensory qualities of HIV antiretroviral drugs often reduce patient adherence particularly in pediatric populations requiring oral consumption. This study examines the palatability of an innovative delivery mechanism utilizing a freeze-drying-in-blister approach to create fast-dissolving tablets (FDTs containing a fixed-dose combination of lopinavir and ritonavir (LPV/r. Consumption patterns of solutions during brief-access and long-term testing and baby foodstuff consumption were analyzed to evaluate the orosensory detection and avoidance of placebo FDTs containing no LPV/r (FDT− and FDTs containing LPV/r (FDT+. Rats showed no change in consumption patterns for the placebo FDT− compared with control solutions. Rats can detect but do not avoid FDT+ at body-weight-adjusted dosages in both brief-access (30-s and long-term (23 h consumption tests. There is an aversive response to concentrated doses of FDT+ during brief-access tests that cannot be masked by 25% sucrose. However, the strongest FDT+ concentration was not rejected when mixed with 50 g of applesauce, banana sauce, or rice cereal baby foodstuffs. The averseness of the FDT+ was associated with the presence of LPV/r and not the FDT− formulation itself. The novel FDT formulation appears to be a palatable delivery mechanism for oral antiretroviral pharmaceuticals especially when mixed with baby foodstuffs.

Flow-injection system for automated dissolution testing of isoniazid tablets with chemiluminescence detection.

Science.gov (United States)

Li, B; Zhang, Z; Liu, W

2001-05-30

A simple and sensitive flow-injection chemiluminescence (CL) system for automated dissolution testing is described and evaluated for monitoring of dissolution profiles of isoniazid tablets. The undissolved suspended particles in the dissolved solution were eliminated via on-line filter. The novel CL system of KIO(4)-isoniazid was also investigated. The sampling frequency of the system was 120 h(-1). The dissolution profiles of isoniazid fast-release tablets from three sources were determined, which demonstrates the stability, great sensitivity, large dynamic measuring range and robustness of the system.

An In Vitro Analysis of Disintegration Times of Different Formulations of Olanzapine Orodispersible Tablet: A Preliminary Report

OpenAIRE

Hobbs, David; Karagianis, Jamie; Treuer, Tamas; Raskin, Joel

2013-01-01

Background Orodispersible tablets (ODTs) are tablet or wafer forms of medication that disintegrate in the mouth, aided only by saliva. ODTs rely on different fast dissolve/disintegration manufacturing technologies. Objectives Disintegration time differences for several olanzapine ODT forms were investigated. Risperdal M-Tab® was included as a non-olanzapine ODT comparator. Research Design and Methods Eleven olanzapine ODT examples and orodispersible risperidone strengths were evaluated in vit...

3D Printing Factors Important for the Fabrication of Polyvinylalcohol Filament-Based Tablets.

Science.gov (United States)

Tagami, Tatsuaki; Fukushige, Kaori; Ogawa, Emi; Hayashi, Naomi; Ozeki, Tetsuya

2017-01-01

Three-dimensional (3D) printers have been applied in many fields, including engineering and the medical sciences. In the pharmaceutical field, approval of the first 3D-printed tablet by the U.S. Food and Drug Administration in 2015 has attracted interest in the manufacture of tablets and drugs by 3D printing techniques as a means of delivering tailor-made drugs in the future. In current study, polyvinylalcohol (PVA)-based tablets were prepared using a fused-deposition-modeling-type 3D printer and the effect of 3D printing conditions on tablet production was investigated. Curcumin, a model drug/fluorescent marker, was loaded into PVA-filament. We found that several printing parameters, such as the rate of extruding PVA (flow rate), can affect the formability of the resulting PVA-tablets. The 3D-printing temperature is controlled by heating the print nozzle and was shown to affect the color of the tablets and their curcumin content. PVA-based infilled tablets with different densities were prepared by changing the fill density as a printing parameter. Tablets with lower fill density floated in an aqueous solution and their curcumin content tended to dissolve faster. These findings will be useful in developing drug-loaded PVA-based 3D objects and other polymer-based articles prepared using fused-deposition-modeling-type 3D printers.

Non-destructive Determination of Disintegration Time and Dissolution in Immediate Release Tablets by Terahertz Transmission Measurements.

Science.gov (United States)

Markl, Daniel; Sauerwein, Johanna; Goodwin, Daniel J; van den Ban, Sander; Zeitler, J Axel

2017-05-01

The aim of this study was to establish the suitability of terahertz (THz) transmission measurements to accurately measure and predict the critical quality attributes of disintegration time and the amount of active pharmaceutical ingredient (API) dissolved after 15, 20 and 25 min for commercial tablets processed at production scale. Samples of 18 batches of biconvex tablets from a production-scale design of experiments study into exploring the design space of a commercial tablet manufacturing process were used. The tablet production involved the process steps of high-shear wet granulation, fluid-bed drying and subsequent compaction. The 18 batches were produced using a 4 factor split plot design to study the effects of process changes on the disintegration time. Non-destructive and contactless terahertz transmission measurements of the whole tablets without prior sample preparation were performed to measure the effective refractive index and absorption coefficient of 6 tablets per batch. The disintegration time (R 2  = 0.86) and API dissolved after 15 min (R 2  = 0.96) linearly correlates with the effective refractive index, n eff , measured at terahertz frequencies. In contrast, no such correlation could be established from conventional hardness measurements. The magnitude of n eff represents the optical density of the sample and thus it reflects both changes in tablet porosity as well as granule density. For the absorption coefficient, α eff , we observed a better correlation with dissolution after 20 min (R 2  = 0.96) and a weaker correlation with disintegration (R 2  = 0.83) compared to n eff . The measurements of n eff and α eff provide promising predictors for the disintegration and dissolution time of tablets. The high penetration power of terahertz radiation makes it possible to sample a significant volume proportion of a tablet without any prior sample preparation. Together with the short measurement time (seconds), the potential to

Short-term treatment with olanzapine does not modulate gut hormone secretion: olanzapine disintegrating versus standard tablets

DEFF Research Database (Denmark)

Vidarsdottir, Solrun; Roelfsema, Ferdinand; Streefland, Trea

2009-01-01

BACKGROUND: Treatment with olanzapine (atypical antipsychotic drug) is frequently associated with various metabolic anomalies, including obesity, dyslipidemia, and diabetes mellitus. Recent data suggest that olanzapine orally disintegrating tablets (ODT), which dissolve instantaneously in the mouth...

Formulation and evaluation of orally disintegrating clopidogrel tablets

Directory of Open Access Journals (Sweden)

Gamal Mohamed Mahrous

Full Text Available ABSTRACT Recent advances in drug delivery systems have aimed to achieve better patient compliance. One of these advances is the formulation of orally disintegrating tablets (ODTs that dissolve instantaneously, releasing drugs within a few seconds without the need of water. The main objective of this paper was to prepare and develop ODTs of clopidogrel. The ODTs were prepared by direct compression. The effect of three superdisintegrants, namely crospovidone, croscarmellose sodium, and sodium starch glycolate, using three different disintegration times on the dissolution rate was investigated. The prepared tablets were evaluated for hardness, friability, disintegration time and in vitro drug release. Furthermore, the interaction of clopidogrel with the formulation excipients was studied using differential scanning calorimetry (DSC. DSC studies revealed that there were no interactions between the drug and the excipients used. All tablets had hardness values in the range 4.0-5.2 kp and friability lower than 1%. The weight and drug content uniformity of all formulations was within official limits according to BP. In vitro drug release studies of the ODTs showed that more than 90% of the drug was released within ten minutes. A palatability test in human volunteers showed acceptable taste and mouth feel. Thus, the obtained results conclusively demonstrated successful rapid disintegration of the formulated tablets and acceptable palatability.

An introduction to fast dissolving oral thin film drug delivery systems: a review.

Science.gov (United States)

Kathpalia, Harsha; Gupte, Aasavari

2013-12-01

Many pharmaceutical companies are switching their products from tablets to fast dissolving oral thin films (OTFs). Films have all the advantages of tablets (precise dosage, easy administration) and those of liquid dosage forms (easy swallowing, rapid bioavailability). Statistics have shown that four out of five patients prefer orally disintegrating dosage forms over conventional solid oral dosages forms. Pediatric, geriatric, bedridden, emetic patients and those with Central Nervous System disorders, have difficulty in swallowing or chewing solid dosage forms. Many of these patients are non-compliant in administering solid dosage forms due to fear of choking. OTFs when placed on the tip or the floor of the tongue are instantly wet by saliva. As a result, OTFs rapidly hydrate and then disintegrate and/or dissolve to release the medication for local and/or systemic absorption. This technology provides a good platform for patent non- infringing product development and for increasing the patent life-cycle of the existing products. The application of fast dissolving oral thin films is not only limited to buccal fast dissolving system, but also expands to other applications like gastroretentive, sublingual delivery systems. This review highlights the composition including the details of various types of polymers both natural and synthetic, the different types of manufacturing techniques, packaging materials and evaluation tests for the OTFs.

Formulation, Characterization and Physicochemical Evaluation of Ranitidine Effervescent Tablets

Directory of Open Access Journals (Sweden)

Abolfazl Aslani

2013-08-01

Full Text Available Purpose: The aim of this study was to design, formulate and physicochemically evaluate effervescent ranitidine hydrochloride (HCl tablets since they are easily administered while the elderly and children sometimes have difficulties in swallowing oral dosage forms. Methods: Effervescent ranitidine HCl tablets were prepared in a dosage of 300 mg by fusion and direct compression methods. The powder blend and granule mixture were evaluated for various pre-compression characteristics, such as angle of repose, compressibility index, mean particle size and Hausner's ratio. The tablets were evaluated for post-compression features including weight variation, hardness, friability, drug content, dissolution time, carbon dioxide content, effervescence time, pH, content uniformity and water content. Effervescent systems with appropriate pre and post-compression qualities dissolved rapidly in water were selected as the best formulations. Results: The results showed that the flowability of fusion method is more than that of direct compression and the F5 and F6 formulations of 300 mg tablets were selected as the best formulations because of their physicochemical characteristics. Conclusion: In this study, citric acid, sodium bicarbonate and sweeteners (including mannitol, sucrose and aspartame were selected. Aspartame, mint and orange flavors were more effective for masking the bitter taste of ranitidine. The fusion method is the best alternative in terms of physicochemical and physical properties.

[Application of β-cyclodextrin in the formulation of ODT tablets containing ibuprofen].

Science.gov (United States)

Zimmer, Łukasz; Kasperek, Regina; Poleszak, Ewa

2014-01-01

Oral disintegrating tablet (ODT) dissolves or disintegrates in saliva and then it is swallowed. Diluent in direct compression formulation has a dual role: it increases bulk of the dosage form and it promotes binding of the constituent particles of the formulation. Hence, selection of diluent is important in tablets produced by direct compression method. The aim of this work was to exame feasibility of preparing and optimizing oral disintegrating tablet formulation using β-cyclodextrin as a diluent. 400 mg round tablets were prepared by direct compression method on single punch tablet press using flat plain-face. 60% β-CD and MCC (microcrystalline cellulose - MCC-Vivapur 102) were used at different proportions for all the formulations. 5% of Kollidon CL was added as superdisintegrant. The eight formulations prepared were assessed for weight variation, thickness, disintegration time, hardness and dissolution rate according to FP IX. A dissolution test was performed at 37ºC using the paddle method at 50 rpm with 900 mL phosphate buffer (pH 6.8) as a dissolution medium. The content of ibuprofen sodium was found inside the ± 5% of the theoretical value. Hardness values of presented tablets were in the range 0.11-0.15 kG/mm2. Friability of the tablets lower than 1% indicates that the developed formulations can be processed and handled without excessive care. Disintegration time was in the range of 86 to 161 s. The results confirm the good mechanical properties of tablets containing β-CD. A composition with 20% β-CD and 40% MCC fulfilled a maximum requisite of an optimum formulation. These properties were similar to Ludiflash, the formulation used for comparison purposes. In the present study, higher concentration of β cyclodextrin was found to improve the hardness of tablets without increasing the disintegration time.

Modulation of drug release kinetics of shellac-based matrix tablets by in-situ polymerization through annealing process.

Science.gov (United States)

Limmatvapirat, Sontaya; Limmatvapirat, Chutima; Puttipipatkhachorn, Satit; Nunthanid, Jurairat; Luangtana-anan, Manee; Sriamornsak, Pornsak

2008-08-01

A new oral-controlled release matrix tablet based on shellac polymer was designed and developed, using metronidazole (MZ) as a model drug. The shellac-based matrix tablets were prepared by wet granulation using different amounts of shellac and lactose. The effect of annealing temperature and pH of medium on drug release from matrix tablets was investigated. The increased amount of shellac and increased annealing temperature significantly affected the physical properties (i.e., tablet hardness and tablet disintegration) and MZ release from the matrix tablets. The in-situ polymerization played a major role on the changes in shellac properties during annealing process. Though the shellac did not dissolve in acid medium, the MZ release in 0.1N HCl was faster than in pH 7.3 buffer, resulting from a higher solubility of MZ in acid medium. The modulation of MZ release kinetics from shellac-based matrix tablets could be accomplished by varying the amount of shellac or annealing temperature. The release kinetics was shifted from relaxation-controlled release to diffusion-controlled release when the amount of shellac or the annealing temperature was increased.

[Tablets and tablet production - with special reference to Icelandic conditions].

Science.gov (United States)

Skaftason, Jóhannes F; Jóhannesson, Thorkell

2013-04-01

Modern tablet compression was instituted in England in 1844 by William Brockedon (1787-1854). The first tablets made according to Brockedon´s procedures contained watersoluble salts and were most likely compressed without expedients. In USA a watershed occurred around 1887 when starch (amylum maydis) was introduced to disperse tablets in aqueous milieu in order to corroborate bioavailability of drugs in the almentary canal. About the same time great advances in tablet production were introduced by the British firm Burroughs Wellcome and Co. In Denmark on the other hand tablet production remained on low scale until after 1920. As Icelandic pharmacies and drug firms modelled themselves mostly upon Danish firms tablet production was first instituted in Iceland around 1930. The first tablet machines in Iceland were hand-driven. More efficent machines came after 1945. Around 1960 three sizeable tablet producers were in Iceland; now there is only one. Numbers of individual tablet species (generic and proprietary) on the market rose from less than 10 in 1913 to 500 in 1965, with wide variations in numbers in between. Tablets have not wiped out other medicinal forms for peroral use but most new peroral drugs have been marketed in the form of tablets during the last decades.

Formulation and Evaluation of Fast-Disintegrating Sublingual Tablets of Atropine Sulfate: the Effect of Tablet Dimensions and Drug Load on Tablet Characteristics.

Science.gov (United States)

Aodah, Alhussain; Bafail, Rawan S; Rawas-Qalaji, Mutasem

2017-07-01

In this study, we formulated and evaluated the effects of tablet dimensions and drug load on the characteristics of atropine sulfate (AS) fast-disintegrating sublingual tablets (FDSTs). We aim to develop AS FDSTs as an alternative non-invasive and portable dosage form for the emergency treatment of organophosphate (OP) toxicity. AS autoinjector, AtroPen®, is the only self-administered dosage form available as an antidote for-out-of-hospital emergency use, but it is associated with several limitations and drawbacks. Seven FDST formulations of two tablet sizes, 150 mg (A) and 50 mg (B), and of several AS loads, 0 mg (A1, B1), 2 mg (A2, B2), 4 mg (B3), and 8 mg (B4a, B4b), were formulated and manufactured by direct compression. AS FDST characteristics were evaluated using USP and non-USP tests. Results were statistically compared at p < 0.05. All FDSTs passed the USP content uniformity and friability tests, disintegrated and released AS in ≤30 and 60 s. B1 and B2 were significantly harder than A1 and A2. Water uptake of A1 was significantly the highest. However, B1 and B2 had shorter disintegration and wetting times and higher amounts of AS dissolved than did A1 and A2 (p < 0.05). Increasing AS negatively affected FDST tensile strength (p < 0.05 for B4a) and water uptake (p < 0.05 for B3, B4a and B4b), however, without affecting AS dissolution. Formulation of AS up to 16% into smaller FDSTs was successful. Smaller FDSTs were harder and disintegrated more quickly. These AS FDSTS have the potential for further in vivo testing to evaluate their OP antidote potential.

Autoradiographic localization of binding sites for (/sup 3/H). gamma. -aminobutyrate, (/sup 3/H) muscimol, (+) (/sup 3/H) bicuculline methiodide and (/sup 3/H) flunitrazepam in cultures of rat cerebellum and spinal cord

Energy Technology Data Exchange (ETDEWEB)

Hoesli, E; Hoesli, L [Basel Univ. (Switzerland); Moehler, H; Richards, J G [Hoffmann-La Roche (F.) and Co., Basel (Switzerland)

1980-01-01

Cultures of rat cerebellum and spinal cord were used to visualize sites for (/sup 3/H)..gamma..-aminobutyrate, (/sup 3/H)muscimol, (/sup 3/H)bicuculline methiodide and (/sup 3/H) flunitrazepam by autoradiography. In cerebellar cultures, many large neurons (presumably Purkinje cells) and interneurons were labelled. In spinal cord cultures, these compounds were mainly bound to small and medium-sized neurons, whereas the majority of large neurons were unlabelled. No binding sites for these radioligands were found on glial cells. Binding of (/sup 3/H)..gamma..-aminobutyrate, (/sup 3/H)muscimol and (/sup 3/H)bicuculline methiodide was markedly reduced or inhibited by adding unlabelled ..gamma..-aminobutyrate, muscimol and bicuculline (10/sup -3/M) respectively to the incubation medium. Addition of a thienobenzazepine markedly reduced binding with (/sup 3/H)flunitrazepam. It is concluded that tissues cultures are an excellent tool to visualize the cellular localization of binding sites for neurotransmitters and drugs using autoradiography.

TabletGaze: Unconstrained Appearance-based Gaze Estimation in Mobile Tablets

OpenAIRE

Huang, Qiong; Veeraraghavan, Ashok; Sabharwal, Ashutosh

2015-01-01

We study gaze estimation on tablets, our key design goal is uncalibrated gaze estimation using the front-facing camera during natural use of tablets, where the posture and method of holding the tablet is not constrained. We collected the first large unconstrained gaze dataset of tablet users, labeled Rice TabletGaze dataset. The dataset consists of 51 subjects, each with 4 different postures and 35 gaze locations. Subjects vary in race, gender and in their need for prescription glasses, all o...

Application of the combinative particle size reduction technology H 42 to produce fast dissolving glibenclamide tablets.

Science.gov (United States)

Salazar, Jaime; Müller, Rainer H; Möschwitzer, Jan P

2013-07-16

Standard particle size reduction techniques such as high pressure homogenization or wet bead milling are frequently used in the production of nanosuspensions. The need for micronized starting material and long process times are their evident disadvantages. Combinative particle size reduction technologies have been developed to overcome the drawbacks of the standard techniques. The H 42 combinative technology consists of a drug pre-treatment by means of spray-drying followed by standard high pressure homogenization. In the present paper, spray-drying process parameters influencing the diminution effectiveness, such as drug and surfactant concentration, were systematically analyzed. Subsequently, the untreated and pre-treated drug powders were homogenized for 20 cycles at 1500 bar. For untreated, micronized glibenclamide, the particle size analysis revealed a mean particle size of 772 nm and volume-based size distribution values of 2.686 μm (d50%) and 14.423 μm (d90%). The use of pre-treated material (10:1 glibenclamide/docusate sodium salt ratio spray-dried as ethanolic solution) resulted in a mean particle size of 236 nm and volume-based size distribution values of 0.131 μm (d50%) and 0.285 μm (d90%). These results were markedly improved compared to the standard process. The nanosuspensions were further transferred into tablet formulations. Wet granulation, freeze-drying and spray-drying were investigated as downstream methods to produce dry intermediates. Regarding the dissolution rate, the rank order of the downstream processes was as follows: Spray-drying>freeze-drying>wet granulation. The best drug release (90% within 10 min) was obtained for tablets produced with spray-dried nanosuspension containing 2% mannitol as matrix former. In comparison, the tablets processed with micronized glibenclamide showed a drug release of only 26% after 10 min. The H 42 combinative technology could be successfully applied in the production of small drug nanocrystals. A

Influence of processing-induced phase transformations on the dissolution of theophylline tablets

OpenAIRE

Debnath, Smita; Suryanarayanan, Raj

2004-01-01

The object of this investigation was to evaluate the influence of (1) processing-induced decrease in drug crystallinity and (2) phase transformations during dissolution, on the per-formance of theophylline tablet formulations. Anhydrous theophylline underwent multiple transformations (anhydrate »hydrate»anhydrate) during processing. Although the crystallinity of the anhydrate obtained finally was lower than that of the unprocessed drug, it dissolved at a slower rate. This decrease in dissolut...

Development of Maltodextrin-Based Immediate-Release Tablets Using an Integrated Twin-Screw Hot-Melt Extrusion and Injection-Molding Continuous Manufacturing Process.

Science.gov (United States)

Puri, Vibha; Brancazio, Dave; Desai, Parind M; Jensen, Keith D; Chun, Jung-Hoon; Myerson, Allan S; Trout, Bernhardt L

2017-11-01

The combination of hot-melt extrusion and injection molding (HME-IM) is a promising process technology for continuous manufacturing of tablets. However, there has been limited research on its application to formulate crystalline drug-containing immediate-release tablets. Furthermore, studies that have applied the HME-IM process to molded tablets have used a noncontinuous 2-step approach. The present study develops maltodextrin (MDX)-based extrusion-molded immediate-release tablets for a crystalline drug (griseofulvin) using an integrated twin-screw HME-IM continuous process. At 10% w/w drug loading, MDX was selected as the tablet matrix former based on a preliminary screen. Furthermore, liquid and solid polyols were evaluated for melt processing of MDX and for impact on tablet performance. Smooth-surfaced tablets, comprising crystalline griseofulvin solid suspension in the amorphous MDX-xylitol matrix, were produced by a continuous process on a twin-screw extruder coupled to a horizontally opening IM machine. Real-time HME process profiles were used to develop automated HME-IM cycles. Formulation adjustments overcame process challenges and improved tablet strength. The developed MDX tablets exhibited adequate strength and a fast-dissolving matrix (85% drug release in 20 min), and maintained performance on accelerated stability conditions. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

An evaluation of total disintegration time for three different doses of sublingual fentanyl tablets in patients with breakthrough pain.

Science.gov (United States)

Nalamachu, Srinivas

2013-12-01

Breakthrough pain is common among patients with cancer and presents challenges to effective pain management. Breakthrough pain is characterized by rapid onset, severe intensity, and duration typically lasting disintegration time of three different doses of sublingual fentanyl tablets in opioid-tolerant patients. This was a single-center, non-randomized, open-label study. Opioid-tolerant adult patients (N = 30) with chronic pain were assigned to one of three dose groups and self-administered a single 100, 200, or 300 μg sublingual fentanyl tablet (Abstral(®), Galena Biopharma, Portland, OR, USA). Time to complete disintegration was measured by each patient with a stopwatch and independently verified by study personnel. Disintegration time (mean ± SD) for sublingual fentanyl tablets (all doses) was 88.2 ± 55.1 s. Mean disintegration times tended to be slightly longer for the 200 μg (96.7 ± 57.9 s) and 300 μg doses (98.6 ± 64.8 s) compared to the 100 μg dose (69.5 ± 40.5 s). Differences were not statistically significant. Disintegration time was not significantly different between men and women and was not affected by age. Sublingual fentanyl tablets dissolved rapidly (average time <2 min) in all patients, with the higher doses taking slightly more time to dissolve.

Development of polymer-bound fast-dissolving metformin buccal film with disintegrants

OpenAIRE

Sheela, A; Haque,Sk Ershadul

2015-01-01

Shaikh Ershadul Haque, Angappan Sheela Materials Chemistry Division, Centre for Nanomaterials, School of Advanced Sciences, VIT University, Vellore, India Abstract: Fast-dissolving drug-delivery systems are considered advantageous over the existing conventional oral dosage forms like tablets, capsules, and syrups for being patient friendly. Buccal films are one such system responsible for systemic drug delivery at the desired site of action by avoiding hepatic first-pass metabolism. Metform...

Tablet splitting and weight uniformity of half-tablets of 4 medications in pharmacy practice.

Science.gov (United States)

Tahaineh, Linda M; Gharaibeh, Shadi F

2012-08-01

Tablet splitting is a common practice for multiple reasons including cost savings; however, it does not necessarily result in weight-uniform half-tablets. To determine weight uniformity of half-tablets resulting from splitting 4 products available in the Jordanian market and investigate the effect of tablet characteristics on weight uniformity of half-tablets. Ten random tablets each of warfarin 5 mg, digoxin 0.25 mg, phenobarbital 30 mg, and prednisolone 5 mg were weighed and split by 6 PharmD students using a knife. The resulting half-tablets were weighed and evaluated for weight uniformity. Other relevant physical characteristics of the 4 products were measured. The average tablet hardness of the sampled tablets ranged from 40.3 N to 68.9 N. Digoxin, phenobarbital, and prednisolone half-tablets failed the weight uniformity test; however, warfarin half-tablets passed. Digoxin, warfarin, and phenobarbital tablets had a score line and warfarin tablets had the deepest score line of 0.81 mm. Splitting warfarin tablets produces weight-uniform half-tablets that may possibly be attributed to the hardness and the presence of a deep score line. Digoxin, phenobarbital, and prednisolone tablet splitting produces highly weight variable half-tablets. This can be of clinical significance in the case of the narrow therapeutic index medication digoxin.

Bioavailability of House Dust Mite Allergens in Sublingual Allergy Tablets Is Highly Dependent on the Formulation.

Science.gov (United States)

Ohashi-Doi, Katsuyo; Kito, Hirokazu; Du, Weibin; Nakazawa, Hiroshi; Ipsen, Henrik; Gudmann, Pernille; Lund, Kaare

2017-01-01

In sublingual immunotherapy (SLIT), the immune system is addressed by solubilized allergen that interacts with immunocompetent cells of the oral mucosa, the efficiency of which is governed by 2 main factors of SLIT allergen bioavailability: the allergen concentration and the mucosal contact time. Recently, 3 house dust mite (HDM) SLIT tablets were developed that differ with regard to allergen content, nominal strength (maintenance doses: 6 SQ-HDM/10,000 Japanese Allergen Units [JAU], 12 SQ-HDM/ 20,000 JAU, and 300 IR/57,000 JAU), and formulation (freeze-dried/compressed). Here, the importance of the SLIT tablet formulation for HDM major allergen bioavailability is examined. The HDM major allergen content, tablet disintegration times, and allergen release kinetics were determined. Dissolution kinetics (allergen concentration vs. time) of Der f 1, Der p 1, and Der 2 were measured. Area under the curve (AUC) was used as a surrogate parameter for allergen bioavailability. The release of HDM major allergens from the freeze-dried tablets was complete after 30 s, while only partial release was achieved with the compressed tablets, even after prolonged dissolution. At 1 min, i.e., the recommended sublingual holding time for the freeze-dried tablets, the allergen bioavailability (AUC) of the compressed 300 IR/57,000 JAU tablet was 4.7-fold (Der f 1), 10.8-fold (Der p 1), and 23.6-fold (Der 2) lower than that of the freeze-dried 12 SQ-HDM/20,000 JAU tablet and similar to (Der f 1) and 5.3-fold (Der p 1) and 12.5-fold (Der 2) lower than that of the freeze-dried 6 SQ-HDM/10,000 JAU tablet. SLIT tablet allergen bioavailability depends highly on the tablet formulation. Only the fast-dissolving freeze-dried tablets provide maximal delivery of soluble allergens and achieve allergen concentrations that reflect the nominal tablet strengths within the recommended sublingual holding time. © 2017 S. Karger AG, Basel.

DEVELOPMENT OF SUSTAINED RELEASE TABLETS CONTAINING SOLID DISPERSIONS OF BACLOFEN

Directory of Open Access Journals (Sweden)

K. H. Janardhana

2015-07-01

Full Text Available Sustained release tablets containing solid dispersions granules of a poorly water soluble drug were prepared to investigate the controlled release of the drug. Baclofen was chosen because of its poor water solubility and short elimination half-life. Poloxamer 188 and PEG 6000 were used as solid dispersion carrier. Free flowing solid dispersion granules were prepared by adsorbing the melt of the drug and carriers onto the surface of an adsorbent, Carbopol 934P followed by direct compression with HPMC K4M and HPMC K100 to obtain an solid dispersion loaded sustained release tablets. FTIR studies confirmed that the compatibility of drug and carriers. Differential scanning calorimetry (DSC and X-ray diffraction (XRD revealed partially amorphous structures of the drug in solid dispersion granules. The solid dispersion granules dissolved completely within 30 min, which was much faster than that of pure drug baclofen. The sustained release of baclofen from the solid dispersion containing tablet was achieved for 2 h in gastric fluid (pH 1.2 and for up to 10 h in intestinal fluid (pH 6.8. A combination of solid dispersion techniques using adsorption and sustained release concepts is a promising approach to control the release rate of poorly water-soluble drugs.

DEVELOPMENT OF SUSTAINED RELEASE TABLETS CONTAINING SOLID DISPERSIONS OF BACLOFEN

Directory of Open Access Journals (Sweden)

K. H. Janardhana

2013-12-01

Full Text Available Sustained release tablets containing solid dispersions granules of a poorly water soluble drug were prepared to investigate the controlled release of the drug. Baclofen was chosen because of its poor water solubility and short elimination half-life. Poloxamer 188 and PEG 6000 were used as solid dispersion carrier. Free flowing solid dispersion granules were prepared by adsorbing the melt of the drug and carriers onto the surface of an adsorbent, Carbopol 934P followed by direct compression with HPMC K4M and HPMC K100 to obtain an solid dispersion loaded sustained release tablets. FTIR studies confirmed that the compatibility of drug and carriers. Differential scanning calorimetry (DSC and X-ray diffraction (XRD revealed partially amorphous structures of the drug in solid dispersion granules. The solid dispersion granules dissolved completely within 30 min, which was much faster than that of pure drug baclofen. The sustained release of baclofen from the solid dispersion containing tablet was achieved for 2 h in gastric fluid (pH 1.2 and for up to 10 h in intestinal fluid (pH 6.8. A combination of solid dispersion techniques using adsorption and sustained release concepts is a promising approach to control the release rate of poorly water-soluble drugs.

Angular circulation speed of tablets in a vibratory tablet coating pan.

Science.gov (United States)

Kumar, Rahul; Wassgren, Carl

2013-03-01

In this work, a single tablet model and a discrete element method (DEM) computer simulation are developed to obtain the angular circulation speed of tablets in a vibratory tablet coating pan for range of vibration frequencies and amplitudes. The models identify three important dimensionless parameters that influence the speed of the tablets: the dimensionless amplitude ratio (a/R), the Froude number (aω2/g), and the tablet-wall friction coefficient, where a is the peak vibration amplitude at the drum center, ω is the vibration angular frequency, R is the drum radius, and g is the acceleration due to gravity. The models predict that the angular circulation speed of tablets increases with an increase in each of these parameters. The rate of increase in the angular circulation speed is observed to decrease for larger values of a/R. The angular circulation speed reaches an asymptote beyond a tablet-wall friction coefficient value of about 0.4. Furthermore, it is found that the Froude number should be greater than one for the tablets to start circulating. The angular circulation speed increases as Froude number increases but then does not change significantly at larger values of the Froude number. Period doubling, where the motion of the bed is repeated every two cycles, occurs at a Froude number larger than five. The single tablet model, although much simpler than the DEM model, is able to predict the maximum circulation speed (the limiting case for a large value of tablet-wall friction coefficient) as well as the transition to period doubling.

A novel spray-dried nanoparticles-in-microparticles system for formulating scopolamine hydrobromide into orally disintegrating tablets

Science.gov (United States)

Li, Feng-Qian; Yan, Cheng; Bi, Juan; Lv, Wei-Lin; Ji, Rui-Rui; Chen, Xu; Su, Jia-Can; Hu, Jin-Hong

2011-01-01

Scopolamine hydrobromide (SH)-loaded microparticles were prepared from a colloidal fluid containing ionotropic-gelated chitosan nanoparticles using a spray-drying method. The spray-dried microparticles were then formulated into orally disintegrating tablets (ODTs) using a wet granulation tablet formation process. A drug entrapment efficiency of about 90% (w/w) and loading capacity of 20% (w/w) were achieved for the microparticles, which ranged from 2 μm to 8 μm in diameter. Results of disintegration tests showed that the formulated ODTs could be completely dissolved within 45 seconds. Drug dissolution profiles suggested that SH is released more slowly from tablets made using the microencapsulation process compared with tablets containing SH that is free or in the form of nanoparticles. The time it took for 90% of the drug to be released increased significantly from 3 minutes for conventional ODTs to 90 minutes for ODTs with crosslinked microparticles. Compared with ODTs made with noncrosslinked microparticles, it was thus possible to achieve an even lower drug release rate using tablets with appropriate chitosan crosslinking. Results obtained indicate that the development of new ODTs designed with crosslinked microparticles might be a rational way to overcome the unwanted taste of conventional ODTs and the side effects related to SH’s intrinsic characteristics. PMID:21720502

Performance of tablet disintegrants: impact of storage conditions and relative tablet density.

Science.gov (United States)

Quodbach, Julian; Kleinebudde, Peter

2015-01-01

Tablet disintegration can be influenced by several parameters, such as storage conditions, type and amount of disintegrant, and relative tablet density. Even though these parameters have been mentioned in the literature, the understanding of the disintegration process is limited. In this study, water uptake and force development of disintegrating tablets are analyzed, as they reveal underlying processes and interactions. Measurements were performed on dibasic calcium phosphate tablets containing seven different disintegrants stored at different relative humidities (5-97%), and on tablets containing disintegrants with different mechanisms of action (swelling and shape recovery), compressed to different relative densities. Disintegration times of tablets containing sodium starch glycolate are affected most by storage conditions, which is displayed in decreased water uptake and force development kinetics. Disintegration times of tablets with a swelling disintegrant are only marginally affected by relative tablet density, whereas the shape recovery disintegrant requires high relative densities for quick disintegration. The influence of relative tablet density on the kinetics of water uptake and force development greatly depends on the mechanism of action. Acquired data allows a detailed analysis of the influence of storage conditions and mechanisms of action on disintegration behavior.

Tablet Use within Medicine

Science.gov (United States)

Hogue, Rebecca J.

2013-01-01

This paper discusses the scholarly literature related to tablet computer use in medicine. Forty-four research-based articles were examined for emerging categories and themes. The most studied uses for tablet computers include: patients using tablets to complete diagnostic survey instruments, medical professionals using tablet computers to view…

Effect of taste masking technology on fast dissolving oral film: dissolution rate and bioavailability

Science.gov (United States)

Zhu, Ying; You, Xinru; Huang, Keqing; Raza, Faisal; Lu, Xin; Chen, Yuejian; Dhinakar, Arvind; Zhang, Yuan; Kang, Yang; Wu, Jun; Ge, Liang

2018-07-01

Fast dissolving oral film is a stamp-style, drug-loaded polymer film with rapid disintegration and dissolution. This new kind of drug delivery system requires effective taste masking technology. Suspension intermediate and liposome intermediate were prepared, respectively, for the formulation of two kinds of fast dissolving oral films with the aim of studying the effect of taste masking technology on the bioavailability of oral films. Loratadine was selected as the model drug. The surface pH of the films was close to neutral, avoiding oral mucosal irritation or side effects. The thickness of a 2 cm × 2 cm suspension oral film containing 10 mg of loratadine was 100 μm. Electron microscope analysis showed that liposomes were spherical before and after re-dissolution, and drugs with obvious bitterness could be masked by the encapsulation of liposomes. Dissolution of the two films was superior to that of the commercial tablets. Rat pharmacokinetic experiments showed that the oral bioavailability of the suspension film was significantly higher than that of the commercial tablets, and the relative bioavailability of the suspension film was 175%. Liposomal film produced a certain amount of improvement in bioavailability, but lower than that of the suspension film.

A new tablet brittleness index.

Science.gov (United States)

Gong, Xingchu; Sun, Changquan Calvin

2015-06-01

Brittleness is one of the important material properties that influences the success or failure of powder compaction. We have discovered that the reciprocal of diametrical elastic strain at fracture is the most suitable tablet brittleness indices (TBIs) for quantifying brittleness of pharmaceutical tablets. The new strain based TBI is supported by both theoretical considerations and a systematic statistical analysis of friability data. It is sufficiently sensitive to changes in both tablet compositions and compaction parameters. For all tested materials, it correctly shows that tablet brittleness increases with increasing tablet porosity for the same powder. In addition, TBI increases with increasing content of a brittle excipient, lactose monohydrate, in the mixtures with a plastic excipient, microcrystalline cellulose. A probability map for achieving less than 1% tablet friability at various combinations of tablet tensile strength and TBI was constructed. Data from marketed tablets validate this probability map and a TBI value of 150 is recommended as the upper limit for pharmaceutical tablets. This TBI can be calculated from the data routinely obtained during tablet diametrical breaking test, which is commonly performed for assessing tablet mechanical strength. Therefore, it is ready for adoption for quantifying tablet brittleness to guide tablet formulation development since it does not require additional experimental work. Copyright © 2015 Elsevier B.V. All rights reserved.

Dose Uniformity of Scored and Unscored Tablets: Application of the FDA Tablet Scoring Guidance for Industry.

Science.gov (United States)

Ciavarella, Anthony B; Khan, Mansoor A; Gupta, Abhay; Faustino, Patrick J

This U.S. Food and Drug Administration (FDA) laboratory study examines the impact of tablet splitting, the effect of tablet splitters, and the presence of a tablet score on the dose uniformity of two model drugs. Whole tablets were purchased from five manufacturers for amlodipine and six for gabapentin. Two splitters were used for each drug product, and the gabapentin tablets were also split by hand. Whole and split amlodipine tablets were tested for content uniformity following the general chapter of the United States Pharmacopeia (USP) Uniformity of Dosage Units , which is a requirement of the new FDA Guidance for Industry on tablet scoring. The USP weight variation method was used for gabapentin split tablets based on the recommendation of the guidance. All whole tablets met the USP acceptance criteria for the Uniformity of Dosage Units. Variation in whole tablet content ranged from 0.5 to 2.1 standard deviation (SD) of the percent label claim. Splitting the unscored amlodipine tablets resulted in a significant increase in dose variability of 6.5-25.4 SD when compared to whole tablets. Split tablets from all amlodipine drug products did not meet the USP acceptance criteria for content uniformity. Variation in the weight for gabapentin split tablets was greater than the whole tablets, ranging from 1.3 to 9.3 SD. All fully scored gabapentin products met the USP acceptance criteria for weight variation. Size, shape, and the presence or absence of a tablet score can affect the content uniformity and weight variation of amlodipine and gabapentin tablets. Tablet splitting produced higher variability. Differences in dose variability and fragmentation were observed between tablet splitters and hand splitting. These results are consistent with the FDA's concerns that tablet splitting can have an effect on the amount of drug present in a split tablet and available for absorption. Tablet splitting has become a very common practice in the United States and throughout the

Study of drug release and tablet characteristics of silicone adhesive matrix tablets.

Science.gov (United States)

Tolia, Gaurav; Li, S Kevin

2012-11-01

Matrix tablets of a model drug acetaminophen (APAP) were prepared using a highly compressible low glass transition temperature (T(g)) polymer silicone pressure sensitive adhesive (PSA) at various binary mixtures of silicone PSA/APAP ratios. Matrix tablets of a rigid high T(g) matrix forming polymer ethyl cellulose (EC) were the reference for comparison. Drug release study was carried out using USP Apparatus 1 (basket), and the relationship between the release kinetic parameters of APAP and polymer/APAP ratio was determined to estimate the excipient percolation threshold. The critical points attributed to both silicone PSA and EC tablet percolation thresholds were found to be between 2.5% and 5% w/w. For silicone PSA tablets, satisfactory mechanical properties were obtained above the polymer percolation threshold; no cracking or chipping of the tablet was observed above this threshold. Rigid EC APAP tablets showed low tensile strength and high friability. These results suggest that silicone PSA could eliminate issues related to drug compressibility in the formulation of directly compressed oral controlled release tablets of poorly compressible drug powder such as APAP. No routinely used excipients such as binders, granulating agents, glidants, or lubricants were required for making an acceptable tablet matrix of APAP using silicone PSA. Copyright © 2012 Elsevier B.V. All rights reserved.

Influence of dissolution media pH and USP1 basket speed on erosion and disintegration characteristics of immediate release metformin hydrochloride tablets.

Science.gov (United States)

Desai, Divyakant; Wong, Benjamin; Huang, Yande; Tang, Dan; Hemenway, Jeffrey; Paruchuri, Srinivasa; Guo, Hang; Hsieh, Daniel; Timmins, Peter

2015-01-01

To investigate the influence of the pH of the dissolution medium on immediate release 850 mg metformin hydrochloride tablets. A traditional wet granulation method was used to manufacture metformin hydrochloride tablets with or without a disintegrant. Tablet dissolution was conducted using the USP apparatus I at 100 rpm. In spite of its pH-independent high solubility, metformin hydrochloride tablets dissolved significantly slower in 0.1 N HCl (pH 1.2) and 50 mM pH 4.5 acetate buffer compared with 50 mM pH 6.8 phosphate buffer, the dissolution medium in the USP. Metformin hydrochloride API compressed into a round 1200 mg disk showed a similar trend. When basket rotation speed was increased from 100 to 250 rpm, the dissolution of metformin hydrochloride tablets was similar in all three media. Incorporation of 2% w/w crospovidone in the tablet formulation improved the dissolution although the pH-dependent trend was still evident, but incorporation of 2% w/w croscarmellose sodium resulted in rapid pH-independent tablet dissolution. In absence of a disintegrant in the tablet formulation, the dissolution was governed by the erosion-diffusion process. Even for a highly soluble drug, a super-disintegrant was needed in the formulation to overcome the diffusion layer limitation and change the dissolution mechanism from erosion-diffusion to disintegration.

Influence of pH modifiers on the dissolution and stability of hydrochlorothiazide in the bi- and three-layer tablets

Directory of Open Access Journals (Sweden)

Blatnik Sandra Urek

2015-12-01

Full Text Available During the past few years, the studies of bi- and multi-layered tablets increased due to the consumption of several different drugs per day by a patient and requests for appropriate patient compliance. The demographic shift toward older population increases the use of combination therapy as polypharmacy. Hydrochlorothiazide (HCTZ, as a model drug, is most commonly used in the treatment of hypertension, congestive heart failure and as a diuretic. The aim of the present study is to investigate the effect of the local environment on dissolution and stability behaviour of HCTZ in fixed multilayered tablet combinations, which are commonly used in polypharmacy. For this purposes, three different systems were introduced: (i two conventional tablets (HCTZ and pH modifying placebo, (ii 2-layer tablets (HCTZ, pH modifying placebo and (iii 3-layer tablets (HCTZ, barrier and pH modifying placebo. Disintegration of tablets, dissolution of HCTZ from tablets and HCTZ related substances were monitored for all systems. Results showed that there was a significant difference between dissolution profiles of the conventional two-tablet system (HCTZ tablet and pH modifying tablet and the 2-layer and 3-layer tablets, which include the pH modifying layer. In the case of the conventional two-tablets system, 85 % of HCTZ was dissolved in less than 15 minutes. The dissolution profiles of HCTZ from 2-layered and 3-layered tablets showed a decrease in the dissolution rate. In addition, during the stability studies, it has been confirmed that the typical degradation product of HCTZ is formed, impurity B (4-amino-6-chloro-1,3-benzenedisulfonamide, which implies formation of formaldehyde as hydrolytic impurity not reported in the Ph. Eur. (16. Both impurities are particularly raised in 2-layered tablets with alkaline and neutral placebo layers. Stability of HCTZ was improved in the case of the 3-layer tablet, where the intermediate separation layer of glycerol monostearate was

Simultaneous determination of rifampicin, isoniazid and pyrazinamide in tablet preparations by multivariate spectrophotometric calibration.

Science.gov (United States)

Goicoechea, H C; Olivieri, A C

1999-08-01

The use of multivariate spectrophotometric calibration is presented for the simultaneous determination of the active components of tablets used in the treatment of pulmonary tuberculosis. The resolution of ternary mixtures of rifampicin, isoniazid and pyrazinamide has been accomplished by using partial least squares (PLS-1) regression analysis. Although the components show an important degree of spectral overlap, they have been simultaneously determined with high accuracy and precision, rapidly and with no need of nonaqueous solvents for dissolving the samples. No interference has been observed from the tablet excipients. A comparison is presented with the related multivariate method of classical least squares (CLS) analysis, which is shown to yield less reliable results due to the severe spectral overlap among the studied compounds. This is highlighted in the case of isoniazid, due to the small absorbances measured for this component.

In vitro disintegration and dissolution studies of once-weekly copies of alendronate sodium tablets (70 mg) and in vivo implications.

Science.gov (United States)

Dansereau, Richard J; Crail, Debbie J; Perkins, Alan C

2008-04-01

The aim of this study was to evaluate the in vitro disintegration and dissolution of 26 alendronic acid tablets (70 mg) on the market in Canada, Germany, the Netherlands, and the United Kingdom compared to the branded product (Fosamax). The disintegration and dissolution times were determined using the methods described in the United States Pharmacopeia 30 (USP 30). The disintegration of four orally disintegrating tablets (non-bisphosphonates) and branded film-coated risedronate sodium tablets were included for comparison. The mean disintegration times of the alendronic acid tablets ranged from 14 s for Pharmachemie (Netherlands) to 342 s (5.7 min) for Betapharm (Germany). The mean disintegration time of the branded product tablets ranged from 43 to 78 s. Six of the 26 companies market alendronic acid tablets with very rapid disintegration times which are similar to those of orally disintegrating tablets (non-bisphosphonates). The alendronic acid tablets with very rapid mean disintegration times are as follows: Pharmachemie (Netherlands), 14 s; Novopharm (Canada), 13-24 s; GRY-Pharma (Germany), 21 s; Juta Pharma (Germany), 30 s; APS/Teva (United Kingdom), 26 and 37 s; and Teva (UK), 14-29 s. Since there is no established disintegration time for alendronic acid tablets there can be no assurance that the copy tablets are equivalent to the branded product in terms of esophageal drug exposure. However, the in vitro disintegration times have not been correlated with in vivo disintegration and performance. The dissolution of all the bisphosphonate tablets was rapid with greater than 80% dissolved in 15 min and all products conformed to the USP 30 specification. The dissolution of all alendronic acid tablets was rapid and complete and conformed to the established USP 30 specifications which should ensure adequate drug absorption from the copy products. However, copies of alendronic acid tablets are approved based on the results of single-dose bioavailability studies in

Enhanced bioavailability of buspirone hydrochloride via cup and core buccal tablets: formulation and in vitro/in vivo evaluation.

Science.gov (United States)

Kassem, Mohamed A A; Elmeshad, Aliaa N; Fares, Ahmed R

2014-03-10

This work aims to prepare sustained release buccal mucoadhesive tablets of buspirone hydrochloride (BH) to improve its systemic bioavailability. The tablets were prepared according to 5×3 factorial design where polymer type was set at five levels (carbopol, hydroxypropyl methylcellulose, sodium alginate, sodium carboxymethyl cellulose and guar gum), and polymer to drug ratio at three levels (1:1, 2:1 and 3:1). Mucoadhesion force, ex vivo mucoadhesion time, percent BH released after 8 h (Q8h) and time for release of 50% BH (T(₅₀%)) were chosen as dependent variables. Additional BH cup and core buccal tablets were prepared to optimize BH release profile and make it uni-directional along with the tablets mucoadhesion. Tablets were evaluated in terms of content uniformity, weight variation, thickness, diameter, hardness, friability, swelling index, surface pH, mucoadhesion strength and time and in vitro release. Cup and core formula (CA10) was able to adhere to the buccal mucosa for 8h, showed the highest Q8h (97.91%) and exhibited a zero order drug release profile. Pharmacokinetic study of formula CA10 in human volunteers revealed a 5.6 fold increase in BH bioavailability compared to the oral commercial Buspar® tablets. Conducting level A in vitro/in vivo correlation showed good correlation (r²=0.9805) between fractions dissolved in vitro and fractions absorbed in vivo. Copyright © 2014 Elsevier B.V. All rights reserved.

Effect of taste masking technology on fast dissolving oral film: dissolution rate and bioavailability.

Science.gov (United States)

Zhu, Ying; You, Xinru; Huang, Keqing; Raza, Faisal; Lu, Xin; Chen, Yuejian; Dhinakar, Arvind; Zhang, Yuan; Kang, Yang; Wu, Jun; Ge, Liang

2018-07-27

Fast dissolving oral film is a stamp-style, drug-loaded polymer film with rapid disintegration and dissolution. This new kind of drug delivery system requires effective taste masking technology. Suspension intermediate and liposome intermediate were prepared, respectively, for the formulation of two kinds of fast dissolving oral films with the aim of studying the effect of taste masking technology on the bioavailability of oral films. Loratadine was selected as the model drug. The surface pH of the films was close to neutral, avoiding oral mucosal irritation or side effects. The thickness of a 2 cm × 2 cm suspension oral film containing 10 mg of loratadine was 100 μm. Electron microscope analysis showed that liposomes were spherical before and after re-dissolution, and drugs with obvious bitterness could be masked by the encapsulation of liposomes. Dissolution of the two films was superior to that of the commercial tablets. Rat pharmacokinetic experiments showed that the oral bioavailability of the suspension film was significantly higher than that of the commercial tablets, and the relative bioavailability of the suspension film was 175%. Liposomal film produced a certain amount of improvement in bioavailability, but lower than that of the suspension film.

Fast dissolving strips: A novel approach for the delivery of verapamil

Directory of Open Access Journals (Sweden)

S Kunte

2010-01-01

Full Text Available Objective: Fast dissolving drug delivery system offers a solution for those patients having difficulty in swallowing tablets/capsules etc. Verapamil is a calcium channel blocker used as an antianginal, antiarrhythmic, and antihypertensive agent with extensive first pass metabolism which results in less bioavailability. This work investigated the possibility of developing verapamil fast dissolving strips allowing fast, reproducible drug dissolution in the oral cavity; thus bypassing first pass metabolism. Materials and methods: The fast dissolving strips were prepared by solvent casting technique with the help of HPMC E6 and maltodextrin. The strips were evaluated for drug content uniformity, film thickness, folding endurance, in vitro disintegration time, in vitro dissolution studies, surface pH study, and palatability study. Results: Official criteria for evaluation parameters were fulfilled by all formulations. Disintegration time showed by formulations was found to be in range of 20.4-28.6 sec. Based on the evaluation parameters, the formulation containing 2% HPMC E6 and 3.5% maltodextrin showed optimum performance against other formulations. Conclusion: It was concluded that the fast dissolving strips of verapamil can be made by solvent casting technique with enhanced dissolution rate, taste masking, and hence better patient compliance and effective therapy

Compressibility of tableting materials and properties of tablets with glyceryl behenate

Directory of Open Access Journals (Sweden)

Mužíková Jitka

2015-03-01

Full Text Available The paper studies the compressibility of directly compressible tableting materials with dry binders, spray-dried lactose and microcrystalline cellulose, and glyceryl dibehenate at various concentrations. Compressibility was evaluated by means of the energy profile of compression and tensile strength of tablets. Release rate of the active ingredient, salicylic acid, from the tablets was also examined. In the case of microcrystalline cellulose, a higher concentration of glyceryl dibehenate increased the strength of tablets, while this did not occur in the case of spray-dried lactose. Increasing concentration of glyceryl dibehenate prolonged the release of salicylic acid; however, no statistically significant difference was found compared to the type of the dry binder used

An in vitro analysis of disintegration times of different formulations of olanzapine orodispersible tablet: a preliminary report.

Science.gov (United States)

Hobbs, David; Karagianis, Jamie; Treuer, Tamas; Raskin, Joel

2013-12-01

Orodispersible tablets (ODTs) are tablet or wafer forms of medication that disintegrate in the mouth, aided only by saliva. ODTs rely on different fast dissolve/disintegration manufacturing technologies. Disintegration time differences for several olanzapine ODT forms were investigated. Risperdal M-Tab(®) was included as a non-olanzapine ODT comparator. Eleven olanzapine ODT examples and orodispersible risperidone strengths were evaluated in vitro for formulation composition, manufacturing method, disintegration and dissolution characteristics, and formulation differences in comparison with freeze dried Zydis(®) ODT. Automated dissolution test equipment captured ODT dissolution rates by measuring real-time release of active ingredient. A high-speed video camera was used to capture tablet disintegration times in warm simulated saliva. The main outcome measure was the disintegration and dissolution characteristics of the ODT formulations. The ODT manufacturing method was associated with time to disintegrate; the fastest were freeze dried tablets, followed by soft compressed tablets and then hard/dense tablets. Olanzapine Zydis(®) was the only ODT that completely disintegrated in less than 4 s for all strengths (5, 10, 15, and 20 mg), followed by 5-mg Prolanz FAST(®) (12 s) and then risperidone ODT 4 mg (40 s). Reasons for slow dissolution of the olanzapine generics may include low product potency, excipient binding, excipient solubility, active ingredient particle size and incomplete disintegration. Differences in the formulation and manufacturing process of olanzapine ODTs appear to have a strong influence on the disintegration time of the active compound; differences that may potentially impact their use in clinical practice.

Prediction of effects of punch shapes on tableting failure by using a multi-functional single-punch tablet press

Directory of Open Access Journals (Sweden)

Takashi Osamura

2017-09-01

Full Text Available We previously determined “Tableting properties” by using a multi-functional single-punch tablet press (GTP-1. We proposed plotting “Compactability” on the x-axis against “Manufacturability” on the y-axis to allow visual evaluation of “Tableting properties”. Various types of tableting failure occur in commercial drug production and are influenced by the amount of lubricant used and the shape of the punch. We used the GTP-1 to measure “Tableting properties” with different amounts of lubricant and compared the results with those of tableting on a commercial rotary tableting machine. Tablets compressed with a small amount of lubricant showed bad “Manufacturability”, leading to sticking of powder on punches. We also tested various punch shapes. The GTP-1 correctly predicted the actual tableting results for all punch shapes. With punches that were more likely to cause tableting failure, our system predicted the effects of lubricant quantity in the tablet formulation and the occurrence of sticking in the rotary tableting machine.

Evaluation of the ease of taking mini-tablets compared with other tablet formulations in healthy volunteers.

Science.gov (United States)

Hayakawa, Yoshiyuki; Uchida, Shinya; Namiki, Noriyuki

2016-03-10

"Mini-tablets" (MTs) are tablets of diameter≤3mm and have been widely studied and developed. However, reports comparing MTs with other tablet formulations are few. We wished to evaluate the ease of taking a MT quantitatively in comparison with an orally disintegrating mini-tablet (ODMT), conventional tablet (CT) and conventional orally disintegrating tablet (ODT). Four types of tablets were prepared. We prepared tablets of two diameters (3mm for MTs and ODMTs vs. 8mm for CTs and ODTs) and two formulations (MTs and CTs vs. ODMTs and ODTs). Our randomized crossover trial in 18 healthy volunteers (8 men and 10 women; mean age, 22.5years) indicated that the visual analog scale (VAS) score for the ease and amount of water required for intake of MTs was significantly lower than those of CTs. An ODMT required the least amount of water and smallest VAS score for the ease of taking a tablet. Our results showed that the advantage of MTs with regard to the ease of taking and decreased amount of water required was exerted for a unit of dosing comprising tablets. These data suggested the usefulness of MTs and the importance of the number of MTs for comfortable consumption by patients. Copyright © 2015. Published by Elsevier B.V.

Investigation of excipients’ nature influence on the quality indices of effervescent tablets of acetylsalicylic acid, paracetamol and ascorbic acid

Directory of Open Access Journals (Sweden)

О. V. Tryhubchak

2018-03-01

Full Text Available The priority objective of pharmaceutical science remains the creation and rational use of medicines. In recent years among these medicines particular attention is paid to the form of sparkling (fast-dissolving, gaseous or effervescent solid dosage forms – tablets, granules, powders, microspheres, capsules, suppositories and others. In the development of effervescent tablets, which are absent in the domestic market, a combination of acetylsalicylic acid, paracetamol and ascorbic acid was selected for experimental studies. The purpose of the work is to study the influence of excipients on the pharmaco-technological properties of effervescent tablets of acetylsalicylic acid, paracetamol and ascorbic acid. Materials and methods. In the course of the experiment, nine excipients from groups of fillers, leavens and binders were investigated. By studying qualitative factors, one of the plans of dispersion analysis was used, namely a three-factorial experiment based on the Hyper-Greek-Latin square. In experiments we used modern equipment for determining the bulk density of powders (ERWEKA GT, Germany, bulk density (ERWEKA SVM 202, Germany, tablet press (Korsh XL-100, Germany, uniformity of the weight of tablets (Mettler Toledo AB54-S, Switzerland, crushing resistance (ERWEKA TBH-525 WTO, Germany, abradability (ERWEKA TAR 200, Germany, disintegration time (ERWEKA ZT 33, Germany. Results. As a result of the statistical processing of experimental results, the influence of excipients on the pharmaco-technological parameters of mass for tableting (bulk density, density after compression, Carr's index, flow ability, slope angle, tableting process, tablet appearance, mass uniformity, abradability, resistance to crushing, disintegration and transparency of the solution were investigated. Conclusions. The influence of nine excipients on the pharmaco-technological characteristics of effervescent tablets of acetylsalicylic acid, paracetamol and ascorbic acid was

Sublingual fast dissolving niosomal films for enhanced bioavailability and prolonged effect of metoprolol tartrate.

Science.gov (United States)

Allam, Ayat; Fetih, Gihan

2016-01-01

The aim of the present work was to prepare and evaluate sublingual fast dissolving films containing metoprolol tartrate-loaded niosomes. Niosomes were utilized to allow for prolonged release of the drug, whereas the films were used to increase the drug's bioavailability via the sublingual route. Niosomes were prepared using span 60 and cholesterol at different drug to surfactant ratios. The niosomes were characterized for size, zeta-potential, and entrapment efficiency. The selected niosomal formulation was incorporated into polymeric films using hydroxypropyl methyl cellulose E15 and methyl cellulose as film-forming polymers and Avicel as superdisintegrant. The physical characteristics (appearance, texture, pH, uniformity of weight and thickness, disintegration time, and palatability) of the prepared films were studied, in addition to evaluating the in vitro drug release, stability, and in vivo pharmacokinetics in rabbits. The release of the drug from the medicated film was fast (99.9% of the drug was released within 30 minutes), while the drug loaded into the niosomes, either incorporated into the film or not, showed only 22.85% drug release within the same time. The selected sublingual film showed significantly higher rate of drug absorption and higher drug plasma levels compared with that of commercial oral tablet. The plasma levels remained detectable for 24 hours following sublingual administration, compared with only 12 hours after administration of the oral tablet. In addition, the absolute bioavailability of the drug (ie, relative to intravenous administration) following sublingual administration was found to be significantly higher (91.06%±13.28%), as compared with that after oral tablet administration (39.37%±11.4%). These results indicate that the fast dissolving niosomal film could be a promising delivery system to enhance the bioavailability and prolong the therapeutic effect of metoprolol tartrate.

How do tablet properties influence swallowing behaviours?

Science.gov (United States)

Yamamoto, Shinya; Taniguchi, Hiroshige; Hayashi, Hirokazu; Hori, Kazuhiro; Tsujimura, Takanori; Nakamura, Yuki; Sato, Hideaki; Inoue, Makoto

2014-01-01

Behavioural performance of tablet swallowing was evaluated with different tablet conditions in terms of size, number and surface coating. Four different types of tablets were prepared: small or large, and with or without a surface coating. Fourteen normal male adults were instructed to swallow the prepared tablets with 15 ml of water. The number of tablets in one trial was changed from one to three. To evaluate swallowing and tablet transport, electromyographic activity was recorded in the left suprahyoid muscles, and videofluorographic images were examined. All tablet conditions (size, number and surface coating) affected the swallowing performance in terms of total number of swallows, electromyographic burst patterns and location of remaining tablets. Increases in the size and number of tablets increased the number of swallows and electromyographic burst area and duration. In addition, all of these parameters increased while swallowing tablets without a coating compared with tablets with a coating. Location of the remaining tablets was mainly within the mouth. This study only clarified the normal pattern of tablet swallowing under several conditions in healthy subjects, but the results may facilitate comprehensive evaluation and treatment planning in terms of administering medication to dysphagic patients. © 2013 Royal Pharmaceutical Society.

Effect of repeated compaction of tablets on tablet properties and work of compaction using an instrumented laboratory tablet press.

Science.gov (United States)

Gamlen, Michael John Desmond; Martini, Luigi G; Al Obaidy, Kais G

2015-01-01

The repeated compaction of Avicel PH101, dicalcium phosphate dihydrate (DCP) powder, 50:50 DCP/Avicel PH101 and Starch 1500 was studied using an instrumented laboratory tablet press which measures upper punch force, punch displacement and ejection force and operates using a V-shaped compression profile. The measurement of work compaction was demonstrated, and the test materials were ranked in order of compaction behaviour Avicel PH101 > DCP/Avicel PH101 > Starch > DCP. The behaviour of the DCP/Avicel PH101 mixture was distinctly non-linear compared with the pure components. Repeated compaction and precompression had no effect on the tensile fracture strength of Avicel PH101 tablets, although small effects on friability and disintegration time were seen. Repeated compaction and precompression reduced the tensile strength and the increased disintegration time of the DCP tablets, but improved the strength and friability of Starch 1500 tablets. Based on the data reported, routine laboratory measurement of tablet work of compaction may have potential as a critical quality attribute of a powder blend for compression. The instrumented press was suitable for student use with minimal supervisor input.

Teach yourself visually Fire tablets

CERN Document Server

Marmel, Elaine

2014-01-01

Expert visual guidance to getting the most out of your Fire tablet Teach Yourself VISUALLY Fire Tablets is the comprehensive guide to getting the most out of your new Fire tablet. Learn to find and read new bestsellers through the Kindle app, browse the app store to find top games, surf the web, send e-mail, shop online, and much more! With expert guidance laid out in a highly visual style, this book is perfect for those new to the Fire tablet, providing all the information you need to get the most out of your device. Abundant screenshots of the Fire tablet graphically rich, touch-based Androi

A novel spray-dried nanoparticles-in-microparticles system for formulating scopolamine hydrobromide into orally disintegrating tablets

Directory of Open Access Journals (Sweden)

Li FQ

2011-04-01

Full Text Available Feng-Qian Li1, Cheng Yan2, Juan Bi1, Wei-Lin Lv3, Rui-Rui Ji3, Xu Chen1, Jia-Can Su3, Jin-Hong Hu31Department of Pharmaceutics, Shanghai Eighth People’s Hospital, Shanghai, People’s Republic of China; 2Department of Pharmacy, Bethune International Peace Hospital, Shijiazhuang, People’s Republic of China; 3Changhai Hospital, Second Military Medical University, Shanghai, People’s Republic of ChinaAbstract: Scopolamine hydrobromide (SH-loaded microparticles were prepared from a colloidal fluid containing ionotropic-gelated chitosan nanoparticles using a spray-drying method. The spray-dried microparticles were then formulated into orally disintegrating tablets (ODTs using a wet granulation tablet formation process. A drug entrapment efficiency of about 90% (w/w and loading capacity of 20% (w/w were achieved for the microparticles, which ranged from 2 µm to 8 µm in diameter. Results of disintegration tests showed that the formulated ODTs could be completely dissolved within 45 seconds. Drug dissolution profiles suggested that SH is released more slowly from tablets made using the microencapsulation process compared with tablets containing SH that is free or in the form of nanoparticles. The time it took for 90% of the drug to be released increased significantly from 3 minutes for conventional ODTs to 90 minutes for ODTs with crosslinked microparticles. Compared with ODTs made with noncrosslinked microparticles, it was thus possible to achieve an even lower drug release rate using tablets with appropriate chitosan crosslinking. Results obtained indicate that the development of new ODTs designed with crosslinked microparticles might be a rational way to overcome the unwanted taste of conventional ODTs and the side effects related to SH’s intrinsic characteristics.Keywords: scopolamine hydrobromide, chitosan, nanoparticles-in-microparticles system, spray-drying, orally disintegrating tablets

Can Tablet Computers Enhance Faculty Teaching?

Science.gov (United States)

Narayan, Aditee P; Whicker, Shari A; Benjamin, Robert W; Hawley, Jeffrey; McGann, Kathleen A

2015-06-01

Learner benefits of tablet computer use have been demonstrated, yet there is little evidence regarding faculty tablet use for teaching. Our study sought to determine if supplying faculty with tablet computers and peer mentoring provided benefits to learners and faculty beyond that of non-tablet-based teaching modalities. We provided faculty with tablet computers and three 2-hour peer-mentoring workshops on tablet-based teaching. Faculty used tablets to teach, in addition to their current, non-tablet-based methods. Presurveys, postsurveys, and monthly faculty surveys assessed feasibility, utilization, and comparisons to current modalities. Learner surveys assessed perceived effectiveness and comparisons to current modalities. All feedback received from open-ended questions was reviewed by the authors and organized into categories. Of 15 eligible faculty, 14 participated. Each participant attended at least 2 of the 3 workshops, with 10 to 12 participants at each workshop. All participants found the workshops useful, and reported that the new tablet-based teaching modality added value beyond that of current teaching methods. Respondents developed the following tablet-based outputs: presentations, photo galleries, evaluation tools, and online modules. Of the outputs, 60% were used in the ambulatory clinics, 33% in intensive care unit bedside teaching rounds, and 7% in inpatient medical unit bedside teaching rounds. Learners reported that common benefits of tablet computers were: improved access/convenience (41%), improved interactive learning (38%), and improved bedside teaching and patient care (13%). A common barrier faculty identified was inconsistent wireless access (14%), while no barriers were identified by the majority of learners. Providing faculty with tablet computers and having peer-mentoring workshops to discuss their use was feasible and added value.

Specifications development for "Karbatril" codenamed tablets

Directory of Open Access Journals (Sweden)

L. I. Kucherenko

2017-08-01

Full Text Available Introduction. According to current legislation of Ukraine the specifications of tablets include the following indicators: description, identification, average weight, disintegration and assay. The aim of the study. The development of specifications and project of quality control methods for "Karbatril" codenamed tablets. Materials and methods. During the study we analyzed 6 series of tablets "Karbatril." For the description, identification, determination of the average mass, disintegration, active ingredients quantify of "Karbatril" codenamed tablets we used appropriate methods and instruments. Results and discussion. Tablets "Karbatril" were analyzed for the following parameters: - Overview - Tablets white or nearly white; - Average weight - during the study the average weight of 6 series of obtained tablets ranged from 339,0 mg to 369,9 mg according to SPU from 337,0 mg to 373,0 mg; - Disintegration – according to SPU the disintegration for tablet without shell shall not exceed 15 min. Analyzed tablets disintegrated in the period from 5 to 10 minutes; - Identification and quantification of the active ingredients of tablets were conducted using modified HPLC methods. During the identification obtained chromatograms show compliance with SPU. In quantitative determination of the active ingredients content in "Karbatril" codenamed tablets we found carbamazepine from 148.18 mg to 150.19 mg, thiotriazoline - from 98.93 mg to 99.71 mg. This data is consistent to SPU which regulates content of carbamazepine - 150 mg ± 7,5%, thiotriazoline - 100 mg ± 10%. Conclusions. This study has developed specification for "Karbatril" codenamed tablets and also methods of HPLC qualitative and quantitative determination of active ingredients. In the specification the following parameters are included: description, identification, average weight, disintegration and assay. The study drafted quality control methods which are planned to be later offered to the

Microstructure of Tablet-Pharmaceutical Significance, Assessment, and Engineering.

Science.gov (United States)

Sun, Changquan Calvin

2017-05-01

To summarize the microstructure - property relationship of pharmaceutical tablets and approaches to improve tablet properties through tablet microstructure engineering. The main topics reviewed here include: 1) influence of material properties and manufacturing process parameters on the evolution of tablet microstructure; 2) impact of tablet structure on tablet properties; 3) assessment of tablet microstructure; 4) development and engineering of tablet microstructure. Microstructure plays a decisive role on important pharmaceutical properties of a tablet, such as disintegration, drug release, and mechanical strength. Useful information on mechanical properties of a powder can be obtained from analyzing tablet porosity-pressure data. When helium pycnometry fails to accurately measure true density of a water-containing powder, non-linear regression of tablet density-pressure data is a useful alternative method. A component that is more uniformly distributed in a tablet generally exerts more influence on the overall tablet properties. During formulation development, it is highly recommended to examine the relationship between any property of interest and tablet porosity when possible. Tablet microstructure can be engineered by judicious selection of formulation composition, including the use of the optimum solid form of the drug and appropriate type and amount of excipients, and controlling manufacturing process.

Grasp interaction with tablets

CERN Document Server

Wolf, Katrin

2015-01-01

This book presents guidelines for a future device type: a tablet that allows ergonomic front- and back-of-device interaction. These guidelines help designers and developers of user interfaces to build ergonomic applications for tablet devices, in particular for devices that enable back-of-device interaction. In addition, manufacturers of tablet devices obtain arguments that back-of-device interaction is a promising extension of the interaction design space and results in increased input capabilities, enriched design possibilities, and proven usability. The guidelines are derived from empirical studies and developed to fit the users’ skills to the way the novel device type is held. Three particular research areas that are relevant to develop design guidelines for tablet interaction are investigated: ergonomic gestures, interaction areas, and pointing techniques.

Taste-masking assessment of orally disintegrating tablets and lyophilisates with cetirizine dihydrochloride microparticles

Directory of Open Access Journals (Sweden)

Aleksandra Amelian

2017-12-01

Full Text Available Orally disintegrating tablets and oral lyophilisates are novel attractive dosage forms that disintegrate or dissolve in the buccal cavity within seconds without necessity of drinking. The major limitation in designing of these dosage forms is unpleasant taste of the drug substance. Cetirizine dihydrochloride is a H1-antihistamine substance indicated for the treatment of allergy. It is characterized by extremely bitter taste, therefore in order to deliver cetirizine dihydrochloride using orodispersible formulations, effective taste-masking is required. The aim of this study was to investigate whether microparticles containing cetirizine dihydrochloride could be successfully used to formulate orally disintegrating tablets by direct compression method and oral lyophilisates by freeze-drying process. Taste masking of cetirizine dihydrochloride was achieved by the spray-drying technique using Eudragit® E PO as the drug agent carrier. Based on the preliminary studies, optimal compositions of microparticles, tablets and lyophilisates were chosen. Obtained dosage forms were characterized for drug content, disintegration time and mechanical properties. In order to determine whether the microparticles subjected to direct compression and freeze-drying process effectively mask the bitter taste of cetirizine dihydrochloride, the in vivo and in vitro evaluation was performed. The results showed that designed formulates with microparticles containing cetirizine dihydrochloride were characterized by appropriate mechanical properties, uniformity of weight and thickness, short disintegration time, and the uniform content of the drug substance. Taste-masking assessment performed by three independent methods (e-tongue evaluation, human test panel and the in vitro drug release revealed that microparticles with Eudragit® E PO are effective taste – masking carriers of cetirizine dihydrochloride and might be used to formulate orally disintegrating tablets and oral

Preparation of venlafaxine hydrochloride sustained-release tablets

Directory of Open Access Journals (Sweden)

GUO Lingling

2013-08-01

Full Text Available To prepare venlafxine hydrochloride sustained-release tablets.Hydroxypropylmethyl cellulose(HPMC and methyl cellulose(MC were used as main materials to prepare sustained-release tablets of velafaxine hydrochloride and the influence of important factors on in vitro release curves of venlafaxine hydrochloride sustained-release tablets was investigated.Results:The optimal prescription included 100 mg HPMC,25 mg MC,and 2.5% glidant in one tablet prepared with 30kN.The tablets were prepared with the method of wet granulation by NO.16 mesh sieve.The tablets exhibited good sustained-release property in phosphate buffered solution (pH=6.8.The as-prepared venlafxine hydrochloride sustained-release tablets have good sustained-release property.

Development of polymer-bound fast-dissolving metformin buccal film with disintegrants.

Science.gov (United States)

Haque, Shaikh Ershadul; Sheela, Angappan

2015-01-01

Fast-dissolving drug-delivery systems are considered advantageous over the existing conventional oral dosage forms like tablets, capsules, and syrups for being patient friendly. Buccal films are one such system responsible for systemic drug delivery at the desired site of action by avoiding hepatic first-pass metabolism. Metformin hydrochloride (Met), an antidiabetic drug, has poor bioavailability due to its high solubility and low permeability. The purpose of the study reported here was to develop a polymer-bound fast-dissolving buccal film of metformin to exploit these unique properties. In the study, metformin fast-dissolving films were prepared by the solvent-casting method using chitosan, a bioadhesive polymer. Further, starch, sodium starch glycolate, and microcrystalline cellulose were the disintegrants added to different ratios, forming various formulations (F1 to F7). The buccal films were evaluated for various parameters like weight variation, thickness, folding endurance, surface pH, content uniformity, tensile strength, and percentage of elongation. The films were also subjected to in vitro dissolution study, and the disintegration time was found to be less than 30 minutes for all formulations, which was attributed to the effect of disintegrants. Formulation F6 showed 92.2% drug release within 6 minutes due to the combined effect of sodium starch glycolate and microcrystalline cellulose.

COMPARISON OF HYDROCORTISONE 10 MG TABLETS: TABLET HARDNESS OPTIMISED FOR ADULT USE HAS NEGATIVE CONSEQUENCES FOR PAEDIATRIC USE.

Science.gov (United States)

Saimbi, Sarina; Madden, Valerie; Stirling, Heather; Yahyouche, Asma; Batchelor, Hannah

2016-09-01

Children's medicines are not always readily available as an age appropriate product and manipulation of adult products is often required. Recently the commercial manufacturing process for 10 mg hydrocortisone tablets has changed and the compression force increased due to tablets fracturing on removal from the blister pack. However, this change led to parents of children requiring hydrocortisone reporting that the tablets were more difficult to manipulate.This study evaluated 10 mg hydrocortisone tablets for their suitability for manipulation in order to deliver an appropriate dose to children (2 mg dose). The physical properties of tablets with the old and new compression force were compared as well as the accuracy of obtaining the paediatric dose. The tablets compared were hydrocortisone Auden 10 mg tablets (Brand A, PL16876/002)-these are the newer, harder tablets- and hydrocortisone 10 mg tablets (Brand B, PL17507/0097). Tablet physical properties including friability (Copley FRV200) and tablet hardness (Copley TBF1000) were compared. The accuracy of split doses (halve and quarter tablets) were recorded on a Sartorius analytical balance. The accuracy of the 2 mg paediatric dosing was assessed by crushing the tablet, adding 10 mL of water and extracting 2 mL. The concentration was measured using UV analysis (Jenway Genova Plus) according to a calibration curve (wavelength=246 nm). Two devices were used to crush the tablets: a spoon onto a plate and a commercially available crushing device (Apothecary Ezy Crush Pill Crusher With Ergo Grip). As anticipated Brand A tablets were harder (51.85 ±5.1 N) compared to Brand B (30.99±4.1 N). Brand A tablets passed the friability testing with Auden tablets which are known to be harder tablets and therefore more force is required to crush these. Some of the experimental work within this project was conducted by Andrew Hackett and Kameron Paul-Thaper whilst at the University of Birmingham on work

A critical review on tablet disintegration.

Science.gov (United States)

Quodbach, Julian; Kleinebudde, Peter

2016-09-01

Tablet disintegration is an important factor for drug release and can be modified with excipients called tablet disintegrants. Tablet disintegrants act via different mechanisms and the efficacy of these excipients is influenced by various factors. In this review, the existing literature on tablet disintegration is critically reviewed. Potential disintegration mechanisms, as well as impact factors on the disintegration process will be discussed based on experimental evidence. Search terms for Scopus and Web of Science included "tablet disintegration", "mechanism tablet disintegration", "superdisintegrants", "disintegrants", "swelling force", "disintegration force", "disintegration mechanisms", as well as brand names of commonly applied superdisintegrants. References of identified papers were screened as well. Experimental data supports swelling and shape recovery as main mechanisms of action of disintegrants. Other tablet excipients and different manufacturing techniques greatly influence the disintegration process. The use of different excipients, experimental setups and manufacturing techniques, as well as the demand for original research led to a distinct patchwork of knowledge. Broader, more systematic approaches are necessary not only to structure the past but also future findings.

Formulation and in vitro and in vivo evaluation of film-coated montelukast sodium tablets using Opadry® yellow 20A82938 on an industrial scale

Directory of Open Access Journals (Sweden)

Zaid AN

2013-02-01

Full Text Available Abdel Naser Zaid,1 Salam Natur,2 Aiman Qaddumi,2 Abeer Abu Ghoush11Department of Pharmacy, Faculty of Medicine and Health Sciences, An-Najah National University, Nablus, Palestine; 2Pharmacare PLC, Ramallah, PalestinePurpose: The aim of this study was to formulate stable film-coated montelukast sodium (MS tablets using Opadry® yellow 20A82938 (Montikast® tablets and to evaluate their in vitro and in vivo release profile.Methods: MS core tablets were manufactured using a direct compression method. Opadry yellow 20A82938 aqueous coating dispersion was used as the film-coating material. Dissolution of the film-coated tablets was tested in 900 mL of 0.5% sodium lauryl sulfate solution and the bioequivalence of the tablets was tested by comparing them with a reference formulation – Singulair® tablets. In vitro–in vivo correlation was evaluated. The stability of the obtained film-coated tablets was evaluated according to International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use guidelines.Results: The efficiency of the film coating was determined by subjecting the coated tablets to gastric pH and drug release was analyzed using high-performance liquid chromatography. The coated tablets had no obvious defects. MS release met the study criterion of not less than 80% dissolved after 30 minutes in 0.5% sodium lauryl sulfate solution. Statistical comparison of the main pharmacokinetic parameters clearly indicated no significant difference between test and reference in any of the calculated pharmacokinetic parameters. Level A correlation between in vitro drug release and in vivo absorption was found to be satisfactory.Conclusion: These findings suggest that aqueous film coating with Opadry yellow 20A82938 is an easy, reproducible, and economical approach for preparing stable MS film-coated tablets without affecting the drug-release characteristics.Keywords: coating, stability, aqueous

EFFERVESCENT TABLETS FORMULATION OF GINGER RHIZOME (Zingiber officinale Rosc. WITH VARIATION OF CITRIC ACID AND TARTARIC ACID LEVEL

Directory of Open Access Journals (Sweden)

Mufrod Mufrod

2015-11-01

Full Text Available Ginger (Zingiber officinale Rosc. has efficacy as an anti-emetic. Ginger rhizome is usually consumed as instant beverages, so that need to be made into a dosage form that more effective, efficient and attractive. This research aims to formulate ginger into effervescent tablets by using variation of the levels of citric acid and tartaric acid. Dried extract of ginger was made with percolation method using ethanol 70% and evaporated using spray dryer. Extract was made for 5 formulas with variation of acid source using smelting method. Granules were tested its physical properties include flow time, tap index, angle of repose, water absorption, compactibility, mass density, water content, and total phenolic level. Granules were compressed become tablets and tested for physical properties include weight uniformity, friability, hardness, dissolve time, flavor response test and total phenolic level. Data were analyzed with Anova One Way using 95% confidence level. The result shown that formula III was the best formula because it meets the physical requirements of granules and tablets. While the formula V (100% tartaric acid was a formula that provides the greatest stability phenolic levels.

Amorphization within the tablet

DEFF Research Database (Denmark)

Doreth, Maria; Hussein, Murtadha Abdul; Priemel, Petra A.

2017-01-01

, the feasibility of microwave irradiation to prepare amorphous solid dispersions (glass solutions) in situ was investigated. Indomethacin (IND) and polyvinylpyrrolidone K12 (PVP) were tableted at a 1:2 (w/w) ratio. In order to study the influence of moisture content and energy input on the degree of amorphization......, tablet formulations were stored at different relative humidity (32, 43 and 54% RH) and subsequently microwaved using nine different power-time combinations up to a maximum energy input of 90 kJ. XRPD results showed that up to 80% (w/w) of IND could be amorphized within the tablet. mDSC measurements...

Android tablets for dummies

CERN Document Server

Gookin, Dan

2015-01-01

Learn all you need to know about your Android tablet in one quick and easy reference! It's not a computer and it's not a smartphone-so what in the world is it? Whether you're new to Android or new to tablets altogether, you're about to experience mobile computing like never before with this fun, full-color guide! Inside, longtime and bestselling author Dan Gookin walks you through setting up your Android tablet, navigating the interface, browsing the web, setting up email, connecting to social media, finding plenty of apps, music, books, and movies to indulge your interests-and so much more.

Sublingual fast dissolving niosomal films for enhanced bioavailability and prolonged effect of metoprolol tartrate

Directory of Open Access Journals (Sweden)

Allam A

2016-08-01

Full Text Available Ayat Allam, Gihan Fetih Department of Pharmaceutics, Faculty of Pharmacy, Assiut University, Assiut, Egypt Abstract: The aim of the present work was to prepare and evaluate sublingual fast dissolving films containing metoprolol tartrate-loaded niosomes. Niosomes were utilized to allow for prolonged release of the drug, whereas the films were used to increase the drug’s bioavailability via the sublingual route. Niosomes were prepared using span 60 and cholesterol at different drug to surfactant ratios. The niosomes were characterized for size, zeta-potential, and entrapment efficiency. The selected niosomal formulation was incorporated into polymeric films using hydroxypropyl methyl cellulose E15 and methyl cellulose as film-forming polymers and Avicel as superdisintegrant. The physical characteristics (appearance, texture, pH, uniformity of weight and thickness, disintegration time, and palatability of the prepared films were studied, in addition to evaluating the in vitro drug release, stability, and in vivo pharmacokinetics in rabbits. The release of the drug from the medicated film was fast (99.9% of the drug was released within 30 minutes, while the drug loaded into the niosomes, either incorporated into the film or not, showed only 22.85% drug release within the same time. The selected sublingual film showed significantly higher rate of drug absorption and higher drug plasma levels compared with that of commercial oral tablet. The plasma levels remained detectable for 24 hours following sublingual administration, compared with only 12 hours after administration of the oral tablet. In addition, the absolute bioavailability of the drug (ie, relative to intravenous administration following sublingual administration was found to be significantly higher (91.06%±13.28%, as compared with that after oral tablet administration (39.37%±11.4%. These results indicate that the fast dissolving niosomal film could be a promising delivery system to

Tablet-Based Functional MRI of the Trail Making Test: Effect of Tablet Interaction Mode

Directory of Open Access Journals (Sweden)

Mahta Karimpoor

2017-10-01

Full Text Available The Trail Making Test (TMT is widely used for assessing executive function, frontal lobe abilities, and visual motor skills. Part A of this pen-and-paper test (TMT-A involves linking numbers randomly distributed in space, in ascending order. Part B (TMT-B alternates between linking numbers and letters. TMT-B is more demanding than TMT-A, but the mental processing that supports the performance of this test remains incompletely understood. Functional MRI (fMRI may help to clarify the relationship between TMT performance and brain activity, but providing an environment that supports real-world pen-and-paper interactions during fMRI is challenging. Previously, an fMRI-compatible tablet system was developed for writing and drawing with two modes of interaction: the original cursor-based, proprioceptive approach, and a new mode involving augmented reality to provide visual feedback of hand position (VFHP for enhanced user interaction. This study characterizes the use of the tablet during fMRI of young healthy adults (n = 22, with half of the subjects performing TMT with VFHP and the other half performing TMT without VFHP. Activation maps for both TMT-A and TMT-B performance showed considerable overlap between the two tablet modes, and no statistically differences in brain activity were detected when contrasting TMT-B vs. TMT-A for the two tablet modes. Behavioral results also showed no statistically different interaction effects for TMT-B vs. TMT-A for the two tablet modes. Tablet-based TMT scores showed reasonable convergent validity with those obtained by administering the standard pen-and-paper TMT to the same subjects. Overall, the results suggest that despite the slightly different mechanisms involved for the two modes of tablet interaction, both are suitable for use in fMRI studies involving TMT performance. This study provides information for using tablet-based TMT methods appropriately in future fMRI studies involving patients and healthy

Multivariate modelling of the tablet manufacturing process with wet granulation for tablet optimization and in-process control

NARCIS (Netherlands)

Westerhuis, J.A; Coenegracht, P.M J; Lerk, C.F

1997-01-01

The process of tablet manufacturing with granulation is described as a two-step process. The first step comprises wet granulation of the powder mixture, and in the second step the granules are compressed into tablets. For the modelling of the pharmaceutical process of wet granulation and tableting,

Evaluation of the performance characteristics of bilayer tablets: Part II. Impact of environmental conditions on the strength of bilayer tablets.

Science.gov (United States)

Kottala, Niranjan; Abebe, Admassu; Sprockel, Omar; Bergum, James; Nikfar, Faranak; Cuitiño, Alberto M

2012-12-01

Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were compressed with different layer ratios, dwell times, layer sequences, material properties (plastic and brittle), first and second layer forces, and lubricant concentrations. Compressed tablets were stored in stability chambers controlled at predetermined conditions (40C/45%RH, 40C/75%RH) for 1, 3, and 5 days. The axial strength of the stored tablets was measured and a statistical model was developed to determine the effects of the aforementioned factors on the strength of bilayer tablets. As part of this endeavor, a full 3 × 2(4) factorial design was executed. Responses of the experiments were analyzed using PROC GLM of SAS (SAS Institute Inc, Cary, North Carolina, USA). A model was fit using all the responses to determine the significant interactions (p < 0.05). Results of this study indicated that storage conditions and storage time have significant impact on the strength of bilayer tablets. For Avicel-lactose and lactose-Avicel tablets, tablet strength decreased with the increasing humidity and storage time. But for lactose-lactose tablets, due to the formation of solid bridges upon storage, an increase in tablet strength was observed. Significant interactions were observed between processing parameters and storage conditions on the strength of bilayer tablets.

Effect of protective coating of aspirin tablets with acrylatemethacrylate copolymers on tablet disintegration times and dissolution rates

OpenAIRE

Okor R; Eichie F; Uhumwangho M; Aka-Aha A

2007-01-01

Tablets of aspirin (a moisture degradable drug) have been film coated with two analogous Eudragit RL and RS copolymers designated here as A and B which differ only in their cation content in the ratio 2:1 (A:B). A, is therefore more hydrophilic than B. The tablets were film coated with ethanol solutions of these two polymers. Film coating with either A or B significantly reduced the moisture uptake potentials of the tablets but caused an increase in the disintegration times of the tablets and...

Using a Virtual Tablet Machine to Improve Student Understanding of the Complex Processes Involved in Tablet Manufacturing.

Science.gov (United States)

Mattsson, Sofia; Sjöström, Hans-Erik; Englund, Claire

2016-06-25

Objective. To develop and implement a virtual tablet machine simulation to aid distance students' understanding of the processes involved in tablet production. Design. A tablet simulation was created enabling students to study the effects different parameters have on the properties of the tablet. Once results were generated, students interpreted and explained them on the basis of current theory. Assessment. The simulation was evaluated using written questionnaires and focus group interviews. Students appreciated the exercise and considered it to be motivational. Students commented that they found the simulation, together with the online seminar and the writing of the report, was beneficial for their learning process. Conclusion. According to students' perceptions, the use of the tablet simulation contributed to their understanding of the compaction process.

Relationships between response surfaces for tablet characteristics of placebo and API-containing tablets manufactured by direct compression method.

Science.gov (United States)

Hayashi, Yoshihiro; Tsuji, Takahiro; Shirotori, Kaede; Oishi, Takuya; Kosugi, Atsushi; Kumada, Shungo; Hirai, Daijiro; Takayama, Kozo; Onuki, Yoshinori

2017-10-30

In this study, we evaluated the correlation between the response surfaces for the tablet characteristics of placebo and active pharmaceutical ingredient (API)-containing tablets. The quantities of lactose, cornstarch, and microcrystalline cellulose were chosen as the formulation factors. Ten tablet formulations were prepared. The tensile strength (TS) and disintegration time (DT) of tablets were measured as tablet characteristics. The response surfaces for TS and DT were estimated using a nonlinear response surface method incorporating multivariate spline interpolation, and were then compared with those of placebo tablets. A correlation was clearly observed for TS and DT of all APIs, although the value of the response surfaces for TS and DT was highly dependent on the type of API used. Based on this knowledge, the response surfaces for TS and DT of API-containing tablets were predicted from only two and four formulations using regression expression and placebo tablet data, respectively. The results from the evaluation of prediction accuracy showed that this method accurately predicted TS and DT, suggesting that it could construct a reliable response surface for TS and DT with a small number of samples. This technique assists in the effective estimation of the relationships between design variables and pharmaceutical responses during pharmaceutical development. Copyright © 2017 Elsevier B.V. All rights reserved.

Touch Screen Tablets and Emergent Literacy

Science.gov (United States)

Neumann, Michelle M.; Neumann, David L.

2014-01-01

The use of touch screen tablets by young children is increasing in the home and in early childhood settings. The simple tactile interface and finger-based operating features of tablets may facilitate preschoolers' use of tablet application software and support their educational development in domains such as literacy. This article reviews…

Quantitative Appearance Inspection for Film Coated Tablets.

Science.gov (United States)

Yoshino, Hiroyuki; Yamashita, Kazunari; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2016-01-01

The decision criteria for the physical appearance of pharmaceutical products are subjective and qualitative means of evaluation that are based entirely on human interpretation. In this study, we have developed a comprehensive method for the quantitative analysis of the physical appearance of film coated tablets. Three different kinds of film coated tablets with considerable differences in their physical appearances were manufactured as models, and their surface roughness, contact angle, color measurements and physicochemical properties were investigated as potential characteristics for the quantitative analysis of their physical appearance. All of these characteristics were useful for the quantitative evaluation of the physical appearances of the tablets, and could potentially be used to establish decision criteria to assess the quality of tablets. In particular, the analysis of the surface roughness and film coating properties of the tablets by terahertz spectroscopy allowed for an effective evaluation of the tablets' properties. These results indicated the possibility of inspecting the appearance of tablets during the film coating process.

Ghost tablet in feces.

Science.gov (United States)

Iwamuro, Masaya; Morishita, Yosuke; Urata, Haruo; Okada, Hiroyuki

2017-12-01

Recently, we encountered a female patient who identified the presence of a ghost tablet in her fecal matter. Interestingly, although the patient was prescribed potassium chloride capsules, elemental composition analysis by energy-dispersive X-ray spectroscopy was unable to detect the presence of either potassium or chloride in the fecal tablet remnant.

21 CFR 520.812 - Enrofloxacin tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Enrofloxacin tablets. 520.812 Section 520.812 Food... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.812 Enrofloxacin tablets. (a) Specifications. Each tablet contains either 22.7, 68.0, or 136.0 milligrams of enrofloxacin. (b) Sponsor. See No...

'Tablet burden' in patients with metastatic breast cancer.

Science.gov (United States)

Milic, Marina; Foster, Anna; Rihawi, Karim; Anthoney, Alan; Twelves, Chris

2016-03-01

The implications for patients with cancer, of the 'tablet burden' resulting from increasing use of oral anticancer drugs and medication for co-morbidities have not previously been well explored. We sought to (i) quantify tablet burden in women with metastatic breast cancer (MBC), (ii) establish which groups of drug contribute most to this burden and (iii) gain insight into patients' attitudes towards oral anti-cancer treatment. One hundred patients with MBC anonymously completed a questionnaire describing their medication histories and attitudes towards their tablets. The patients (mean age 60, range 31-95) were all female and taking a median of six tablets (range 0-31) daily; 37 patients were taking >10 tablets. Oral anticancer treatment constituted the category of treatment taken by the highest proportion of patients, followed by symptomatic cancer treatments, proton pump inhibitors and cardiovascular medication. Numerically, however, symptomatic drugs accounted for 44% of all tablets and specific anti-cancer treatment for 15%; medication not directly related to the cancer accounted for the remaining 40% of tablets. A quarter of patients reported inconvenience in taking their tablets, the main reason being tablet size and one third reported forgetting their tablets at least once a week. Nearly two thirds of patients expressing a preference favoured oral anticancer treatment, the commonest reason being greater convenience. Tablet burden is considerable for many patients with MBC and can be problematic. A significant proportion of tablets represent treatment for co-morbidities, the significance of which may be questionable in women with MBC. Copyright © 2015 Elsevier Ltd. All rights reserved.

Tablet telerounding.

Science.gov (United States)

Kaczmarek, Bartosz F; Trinh, Quoc-Dien; Menon, Mani; Rogers, Craig G

2012-12-01

To evaluate the feasibility of remote rounding using commercially available standard tablets with videoconferencing system and assess patient satisfaction. Thirty-two patients with at least 2 postoperative days of hospital stay after robotic urologic procedures were included in the study. On the first postoperative day, the physician-patient encounter was performed as telerounding with videoconferencing due to the physician's duties scheduled in another affiliated hospital. On the second day, the personal bedside encounter took place. The tablet we used was an iPad2 (Apple, iOS 5.1; Apple, Cupertino, CA) with a videoconferencing application. A telerounding satisfaction survey was fulfilled by all patients on the touchscreen of the tablet. Average time of telerounding encounter was 4.5 minutes (range, 1.0-13.5 minutes), average age of the patient was 57.7 years (range, 19-80 years), and 19 were men (59%). Patients expressed a high level of satisfaction with 91% of patients stating that their care was better using telerounding and 97% of patients stating that telerounding should be a regular part of patient care in the hospital. Additionally, 94% of patients stated that they could easily communicate with their doctor over the telerounding system, 84% of patients agreed that they would feel comfortable with telerounding daily if they were hospitalized again and 81% of patients would prefer telerounding communication with their doctor than be directly seen by another doctor. Tablet telerounding using videoconferencing can be a strong supplementing tool in doctor-patient communication. It is convenient for the physician and increases the patient's hospital stay satisfaction. Copyright © 2012 Elsevier Inc. All rights reserved.

Principles of Tablet Computing for Educators

Science.gov (United States)

Katzan, Harry, Jr.

2015-01-01

In the study of modern technology for the 21st century, one of the most popular subjects is tablet computing. Tablet computers are now used in business, government, education, and the personal lives of practically everyone--at least, it seems that way. As of October 2013, Apple has sold 170 million iPads. The success of tablets is enormous and has…

Using Tablet on Education

Science.gov (United States)

Algoufi, Rateeba

2016-01-01

Technological advancements in digital devices have made educational methodology to adopt new strategies and procedures to suit the Mobile learning era. Mobile devices such as tablets are growing to be the focus of research studies and educational use around the globe in the present day. With the influence of handy computing tablets in the hands of…

Evaluation of tableting and tablet properties of Kollidon SR: the influence of moisture and mixtures with theophylline monohydrate.

Science.gov (United States)

Hauschild, Karsten; Picker-Freyer, Katharina M

2006-02-01

The aim of the study was firstly to investigate the influence of moisture on the tableting and tablet properties of Kollidon SR and secondly to investigate the influence of theophylline monohydrate on the tableting behavior and tablet properties produced from binary mixtures with Kollidon SR. In comparison to Kollidon SR, microcrystalline cellulose (MCC) was used. The glass transition temperature (Tg) of the powder over the whole range of RH (0-90%), and in addition, the Tg of tablets of Kollidon SR were measured. Densities and flowability of the powders were analyzed. The tablets were produced at five different maximum relative densities (rho(rel), max) on an instrumented eccentric tableting machine. They were produced at three different relative humidities (RH), 30%, 45%, and 60% RH for the pure substances and binary mixtures with different ratios of drug and excipient were tableted at 45% RH. The tableting properties were analyzed by 3D modeling, force-displacement profiles, and compactibility plots. First, the Tg of the powder decreased with increasing RH and the Tg of the tablet was 4-8 K lower than the powder. The predominant deformation of Kollidon SR is plastic deformation and Kollidon SR showed a higher compactibility than MCC. The parameters of the 3D model showed an extreme change between 45 and 60% RH, and at higher RH more and more particles deformed elastically. This was confirmed by analysis of force-displacement profiles. At 60% RH, the radial tensile strength of the Kollidon SR tablets was half of the radial tensile strength at 45% RH. The reason is a higher relative energy of plastic deformation than for MCC. This results in a better utilization of the energy to deform the powder into a tablet and the exceeding of the glass transition temperature at higher RH. In conclusion, at 60% RH at the same rho(rel, max), tableting and tablet properties of Kollidon SR are extremely changed since plasticity is significantly higher. In the second part of the

Tablet-Aided BehavioraL intervention EffecT on Self-management skills (TABLETS) for Diabetes.

Science.gov (United States)

Lynch, Cheryl P; Williams, Joni S; J Ruggiero, Kenneth; G Knapp, Rebecca; Egede, Leonard E

2016-03-22

Multiple randomized controlled trials (RCTs) show that behavioral lifestyle interventions are effective in improving diabetes management and that comprehensive risk factor management improves cardiovascular disease (CVD) outcomes. The role of technology has been gaining strong support as evidence builds of its potential to improve diabetes management; however, evaluation of its impact in minority populations is limited. This study intends to provide early evidence of a theory-driven intervention, Tablet-Aided BehavioraL intervention EffecT on Self-management skills (TABLETS), using real-time videoconferencing for education and skills training. We examine the potential for TABLETS to improve health risk behaviors and reduce CVD risk outcomes among a low-income African American (AA) population with poorly controlled type 2 diabetes. The study is a two-arm, pilot controlled trial that randomizes 30 participants to the TABLETS intervention and 30 participants to a usual care group. Blinded outcome assessments will be completed at baseline, 2.5 months (immediate post-intervention), and 6.5 months (follow-up). The TABLETS intervention consists of culturally tailored telephone-delivered diabetes education and skills training delivered via videoconferencing on tablet devices, with two booster sessions delivered via tablet-based videoconferencing at 3 months and 5 months to stimulate ongoing use of the tablet device with access to intervention materials via videoconferencing slides and a manual of supplementary materials. The primary outcomes are physical activity, diet, medication adherence, and self-monitoring behavior, whereas the secondary outcomes are HbA1c, low-density lipoprotein cholesterol (LDL-C), BP, CVD risk, and quality of life. This study provides a unique opportunity to assess the feasibility and efficacy of a theory-driven, tablet-aided behavioral intervention that utilizes real-time videoconferencing technology for education and skills training on self

Bioequivalence of 2 Formulations of Sildenafil Oral Soluble Film 100 mg and Sildenafil Citrate (Viagra) 100 mg Oral Tablets in Healthy Male Volunteers.

Science.gov (United States)

Dadey, Eric

Sildenafil citrate tablets (VIAGRA; Pfizer Inc) have been used since 1998 as an oral therapy for the treatment of erectile dysfunction. However, in some cases, patients may have difficulty in swallowing tablets, and the need to use water to aid in the oral administration of the tablets has the potential to interrupt the sexual encounter, reduce spontaneity, and therefore decrease the quality of the experience. Two oral soluble film (OSF) formulations of sildenafil were developed using MonoSol Rx's proprietary PharmFilm technology. Both films were formulated to dissolve rapidly on the tongue, thereby releasing the drug into the oral cavity, whereupon it is swallowed without the use of water. From a patient perspective, it is anticipated that the film formulations of sildenafil citrate will provide a more compliant and discreet dosage form. The purpose of this clinical study was to compare the bioequivalence of the 2 sildenafil OSF 100 mg formulations (MonoSol Rx, LLC) with the sildenafil citrate 100 mg tablets. The design was a single-dose, randomized, open-label, 3-period, 6-sequence, 3-treatment, single-center, crossover study conducted in 18 healthy, nonsmoking male volunteers under fasting conditions, with each treatment period separated by a 7-day washout period. Plasma sildenafil concentrations were measured predose and then periodically to 24 hours after dosing. The 90% confidence intervals for plasma sildenafil AUC0-t, AUC0-∞, and Cmax for both sildenafil OSF formulations as compared with sildenafil citrate tablets were all within the 80%-125% range, indicating bioequivalence of both film formulations to sildenafil citrate tablets. Overall, the demonstrated bioequivalence coupled with the performance advantages of an OSF dosage form (ie, rapid dissolution in the mouth, can be taken without water, and can be dosed discreetly) suggest that the sildenafil OSF may provide an attractive alternative to sildenafil citrate oral tablets.

21 CFR 520.434 - Chlorphenesin carbamate tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Chlorphenesin carbamate tablets. 520.434 Section 520.434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Chlorphenesin carbamate tablets. (a) Specifications. Each tablet contains 400 milligrams of chlorphenesin...

Stage control of tablets manufacturing

Directory of Open Access Journals (Sweden)

L. I. Kucherenko

2014-08-01

Full Text Available Today in Ukraine tuberculosis is the wide-spread infectious disease causing the death in most cases; about 700 thousand persons are suffering from it. In Ukraine epidemic of tuberculosis is progressing and spreading. In spite of all protective measures three inhabitants of our country contract tuberculosis per hour, every hour one patient dies and in common about 1.5% of the population is ill with tuberculosis. Isoniazid is antituberculous drug of the first line and it is the most effective one. Chemotherapy of tuberculosis requests long-lasting administration of antituberculous drugs that causes high risk of side effects. To prevent or lessen side effects of antituberculous medicines antioxidants use in complex therapy is perspective. Fulfilled investigations showed efficacy of combining two medical substances – isoniazid andthiotriazolin – in one dosage form. Objective.The aim of our investigation is working out the methods of standardization, in particularquantitative determination of isoniazid andthiotriazolin content in tablet mass by high-performance liquid chromatography (HPLC. Materials and Methods.During in-process investigations combined tableted remedy containing isoniazid andthiotriazolin and proper amount of adjuvants has been developed (it contains active substances isoniazid – 0.2 g,thiotriazolin – 0.05 g and adjuvants up to the 0.4 g of the tablet. During stage control of tablets manufacturingspecial attention is paid to the control of tablet mass quality. Especially it concerns quantitative determination of active substances in it. More and more attention is paid to modern physical-chemical methods of standardization in up-to-date analysis of drug products, such as ultraviolet spectrometry, high-performance liquid chromatography (HPLC etc. In previous scientific investigations we proved the possibility of standardization of active substances artificial compound by HPLC method and optimal conditions of analysis performing

Terahertz Technology: A Boon to Tablet Analysis

Science.gov (United States)

Wagh, M. P.; Sonawane, Y. H.; Joshi, O. U.

2009-01-01

The terahertz gap has a frequency ranges from ∼0.3 THz to ∼10 THz in the electromagnetic spectrum which is in between microwave and infrared. The terahertz radiations are invisible to naked eye. In comparison with x-ray they are intrinsically safe, non-destructive and non-invasive. Terahertz spectroscopy enables 3D imaging of structures and materials, and the measurement of the unique spectral fingerprints of chemical and physical forms. Terahertz radiations are produced by a dendrimer based high power terahertz source and spectroscopy technologies. It resolves many of the questions left unanswered by complementary techniques, such as optical imaging, Raman and infrared spectra. In the pharmaceutical industries it enables nondestructive, internal, chemical analysis of tablets, capsules, and other dosage forms. Tablet coatings are a major factor in drug bioavailability. Therefore tablet coatings integrity and uniformity are of crucial importance to quality. Terahertz imaging gives an unparalleled certainty about the integrity of tablet coatings and the matrix performance of tablet cores. This article demonstrates the potential of terahertz pulse imaging for the analysis of tablet coating thickness by illustrating the technique on tablets. PMID:20490288

Gastric emptying of enteric-coated tablets

International Nuclear Information System (INIS)

Park, H.M.; Chernish, S.M.; Rosenek, B.D.; Brunelle, R.L.; Hargrove, B.; Wellman, H.N.

1984-01-01

To evaluate the gastric emptying time of pharmaceutical dosage forms in a clinical setting, a relatively simple dual-radionuclide technique was developed. Placebo tablets of six different combinations of shape and size were labeled with indium-111 DTPA and enteric coated. Six volunteers participated in a single-blind and crossover study. Tablets were given in the morning of a fasting stomach with 6 oz of water containing /sup 99m/Tc pertechnetate and continuously observed with a gamma camera. A scintigraph was obtained each minute. The results suggested that the size, shape, or volume of the tablet used in this study had no significant effect in the rate of gastric emptying. The tablets emptied erratically and unpredictably, depending upon their time of arrival in the stomach in relation to the occurrence of interdigestive myoelectric contractions. The method described is a relatively simple and accurate technique to allow one to follow the gastric emptying of tablets

Iodine tablets and a nuclear accident

International Nuclear Information System (INIS)

Paile, W.

1992-01-01

Radioactive iodine is one of the major substances released during severe nuclear accidents. Radioactive iodine is easily gasified, and if present in fallout it can enter the lungs, and thereby the circulatory system, with the inhalation of air. Once in a body, radioactive iodine accumulates in the thyroid and may result in tumours in the thyroid and, in extreme cases, impaired thyroid function. Accumulation of radioactive iodine can be prevented by taking non-radioactive, 'cold' iodine as tablets. Iodine tablets dilute the radioactive iodine that has entered the body. A dose of iodine also paralyses the thyroid temporarily by saturating its iodine-carrying capacity. To be useful iodine tablets should be taken immediately when a radioactive emission has occurred. If the tablets are taken too early or too late, they give little protection. Iodine tablets should not be taken just to be on the safe side, since their use may involve harmful side effects. Dosing instructions should also be followed with care. (orig.)

Tablets for Learning in Higher Education

DEFF Research Database (Denmark)

Godsk, Mikkel

Based on a small-scale literature review this paper identifies the top 10 affordances of post PC tablets (sometimes referred to as ‘tablet computers’) for higher education in settings where the technology is used for learning. The review shows that the predominant affordances of the technology...... are related to its ability to support engaging, inclusive, and/or collaborative learning, to provide flexibility in place, and to include multimedia and interactive content in teaching practice. However, performing the review also revealed that the notion of tablets for learning is equivocal. As a consequence......, the concepts of tabletcasts and tabletcasting are introduced as one possible framing for future research on tablets as an educational technology....

Lattice-Boltzmann Simulation of Tablet Disintegration

Science.gov (United States)

Jiang, Jiaolong; Sun, Ning; Gersappe, Dilip

Using the lattice-Boltzmann method, we developed a 2D model to study the tablet disintegration involving the swelling and wicking mechanisms. The surface area and disintegration profile of each component were obtained by tracking the tablet structure in the simulation. Compared to pure wicking, the total surface area is larger for swelling and wicking, which indicates that the swelling force breaks the neighboring bonds. The disintegration profiles show that the tablet disintegrates faster than pure wicking, and there are more wetted active pharmaceutical ingredient particles distributed on smaller clusters. Our results indicate how the porosity would affect the disintegration process by changing the wetting area of the tablet as well as by changing the swelling force propagation.

Attitudes towards Smart Phones and Tablets

Directory of Open Access Journals (Sweden)

Ali Akbar Ansarin

2017-07-01

Full Text Available This paper examines the perceptions of advantages of smart phones and tablets on basic and general English students' language learning, self-sufficiency, and interest using smart phones and tablets at an Iranian university college during one university term. Through a survey administered to 333 basic and general English students and through selective observations and interviews, the following questions were examined: 1 Students' perceived impact of smart phones and tablets on increasing their confidence throughout the course,2  Students’ perceived comfort/enjoyment with smart phones and tablets for the students at the beginning and end of the semester,3 Students' perceived impact of devices through a comparison between pre and post survey measures on improvement of reading comprehension, reading speed, vocabulary and spelling, motivation, and preparing them for class tests and quizzes. Tablets were evaluated more positively than smart phones by the students as a means to increase confidence. Both tablets and smart phones were evaluated positively, both as a means of improving students’ motivation to learn, and as a means to develop reading comprehension, spelling, and vocabulary. However, students’ expectations regarding the impact of such devices on their reading speed, preparation for tests and quizzes, as well as comfort and enjoyment were not met.

Measurement uncertainty of dissolution test of acetaminophen immediate release tablets using Monte Carlo simulations

Directory of Open Access Journals (Sweden)

Daniel Cancelli Romero

2017-10-01

Full Text Available ABSTRACT Analytical results are widely used to assess batch-by-batch conformity, pharmaceutical equivalence, as well as in the development of drug products. Despite this, few papers describing the measurement uncertainty estimation associated with these results were found in the literature. Here, we described a simple procedure used for estimating measurement uncertainty associated with the dissolution test of acetaminophen tablets. A fractionate factorial design was used to define a mathematical model that explains the amount of acetaminophen dissolved (% as a function of time of dissolution (from 20 to 40 minutes, volume of dissolution media (from 800 to 1000 mL, pH of dissolution media (from 2.0 to 6.8, and rotation speed (from 40 to 60 rpm. Using Monte Carlo simulations, we estimated measurement uncertainty for dissolution test of acetaminophen tablets (95.2 ± 1.0%, with a 95% confidence level. Rotation speed was the most important source of uncertainty, contributing about 96.2% of overall uncertainty. Finally, it is important to note that the uncertainty calculated in this paper reflects the expected uncertainty to the dissolution test, and does not consider variations in the content of acetaminophen.

Effects of food on a gastrically degraded drug: azithromycin fast-dissolving gelatin capsules and HPMC capsules.

Science.gov (United States)

Curatolo, William; Liu, Ping; Johnson, Barbara A; Hausberger, Angela; Quan, Ernest; Vendola, Thomas; Vatsaraj, Neha; Foulds, George; Vincent, John; Chandra, Richa

2011-07-01

Commercial azithromycin gelatin capsules (Zithromax®) are known to be bioequivalent to commercial azithromycin tablets (Zithromax®) when dosed in the fasted state. These capsules exhibit a reduced bioavailability when dosed in the fed state, while tablets do not. This gelatin capsule negative food effect was previously proposed to be due to slow and/or delayed capsule disintegration in the fed stomach, resulting in extended exposure of the drug to gastric acid, leading to degradation to des-cladinose-azithromycin (DCA). Azithromycin gelatin capsules were formulated with "superdisintegrants" to provide fast-dissolving capsules, and HPMC capsule shells were substituted for gelatin capsule shells, in an effort to eliminate the food effect. Healthy volunteers were dosed with these dosage forms under fasted and fed conditions; pharmacokinetics were evaluated. DCA pharmacokinetics were also evaluated for the HPMC capsule subjects. In vitro disintegration of azithromycin HPMC capsules in media containing food was evaluated and compared with commercial tablets and commercial gelatin capsules. When the two fast-dissolving capsule formulations were dosed to fed subjects, the azithromycin AUC was 38.9% and 52.1% lower than after fasted-state dosing. When HPMC capsules were dosed to fed subjects, the azithromycin AUC was 65.5% lower than after fasted-state dosing. For HPMC capsules, the absolute fasting-state to fed-state decrease in azithromycin AUC (on a molar basis) was similar to the increase in DCA AUC. In vitro capsule disintegration studies revealed extended disintegration times for commercial azithromycin gelatin capsules and HPMC capsules in media containing the liquid foods milk and Ensure®. Interaction of azithromycin gelatin and HPMC capsules with food results in slowed disintegration in vitro and decreased bioavailability in vivo. Concurrent measurement of serum azithromycin and the acid-degradation product DCA demonstrates that the loss of azithromycin

21 CFR 520.1409 - Methylprednisolone, aspirin tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Methylprednisolone, aspirin tablets. 520.1409... Methylprednisolone, aspirin tablets. (a) Specifications. Each tablet contains 0.5 milligram of methylprednisolone and 300 milligrams of aspirin. (b) Sponsor. See No. 000009 in § 510.600(c) of this chapter. (c) NAS/NRC...

21 CFR 520.1157 - Iodinated casein tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Iodinated casein tablets. 520.1157 Section 520...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1157 Iodinated casein tablets. (a) Specifications. Each 1-gram tablet contains 25 milligrams of iodinated casein. (b) Sponsor...

Tablet surface characterisation by various imaging techniques

DEFF Research Database (Denmark)

Seitavuopio, Paulus; Rantanen, Jukka; Yliruusi, Jouko

2003-01-01

The aim of this study was to characterise tablet surfaces using different imaging and roughness analytical techniques including optical microscopy, scanning electron microscopy (SEM), laser profilometry and atomic force microscopy (AFM). The test materials compressed were potassium chloride (KCl......) and sodium chloride (NaCl). It was found that all methods used suggested that the KCl tablets were smoother than the NaCl tablets and higher compression pressure made the tablets smoother. Imaging methods like optical microscopy and SEM can give useful information about the roughness of the sample surface...

Development of polymer-bound fast-dissolving metformin buccal film with disintegrants

Directory of Open Access Journals (Sweden)

Haque SE

2015-10-01

Full Text Available Shaikh Ershadul Haque, Angappan Sheela Materials Chemistry Division, Centre for Nanomaterials, School of Advanced Sciences, VIT University, Vellore, India Abstract: Fast-dissolving drug-delivery systems are considered advantageous over the existing conventional oral dosage forms like tablets, capsules, and syrups for being patient friendly. Buccal films are one such system responsible for systemic drug delivery at the desired site of action by avoiding hepatic first-pass metabolism. Metformin hydrochloride (Met, an antidiabetic drug, has poor bioavailability due to its high solubility and low permeability. The purpose of the study reported here was to develop a polymer-bound fast-dissolving buccal film of metformin to exploit these unique properties. In the study, metformin fast-dissolving films were prepared by the solvent-casting method using chitosan, a bioadhesive polymer. Further, starch, sodium starch glycolate, and microcrystalline cellulose were the disintegrants added to different ratios, forming various formulations (F1 to F7. The buccal films were evaluated for various parameters like weight variation, thickness, folding endurance, surface pH, content uniformity, tensile strength, and percentage of elongation. The films were also subjected to in vitro dissolution study, and the disintegration time was found to be less than 30 minutes for all formulations, which was attributed to the effect of disintegrants. Formulation F6 showed 92.2% drug release within 6 minutes due to the combined effect of sodium starch glycolate and microcrystalline cellulose. Keywords: chitosan, sodium starch glycolate, microcrystalline cellulose, drug-delivery system, immediate release

Evaluation of Certain Pharmaceutical Quality Attributes of Lisinopril Split Tablets

Directory of Open Access Journals (Sweden)

Khairi M. S. Fahelelbom

2016-10-01

Full Text Available Tablet splitting is an accepted practice for the administration of drugs for a variety of reasons, including dose adjustment, ease of swallowing and cost savings. The purpose of this study was to evaluate the physical properties of lisinopril tablets as a result of splitting the tablets either by hand or with a splitting device. The impact of the splitting technique of lisinopril (Zestril® tablets, 20 mg on certain physical parameters such as weight variation, friability, disintegration, dissolution and drug content were studied. Splitting the tablets either by hand or with a splitter resulted in a minute but statistically significant average weight loss of <0.25% of the tablet to the surrounding environment. The variability in the weight of the hand-split tablet halves was more pronounced (37 out of 40 tablet halves varied by more than 10% from the mean weight than when using the tablet splitter (3 out of 40 tablet halves. The dissolution and drug content of the hand-split tablets were therefore affected because of weight differences. However, the pharmacopoeia requirements for friability and disintegration time were met. Hand splitting of tablets can result in an inaccurate dose and may present clinical safety issues, especially for drugs with a narrow therapeutic window in which large fluctuations in drug concentrations are undesirable. It is recommended to use tablets with the exact desired dose, but if this is not an option, then a tablet splitter could be used.

Tablet splitting: is it worthwhile? Analysis of drug content and weight uniformity for half tablets of 16 commonly used medications in the outpatient setting.

Science.gov (United States)

Helmy, Sally A

2015-01-01

Tablet splitting is a well-established medical practice in clinical settings for multiple reasons, including cost savings and ease of swallowing. However, it does not necessarily result in weight-uniform half tablets. To (a) investigate the effect of tablet characteristics on weight and content uniformity of half tablets, resulting from splitting 16 commonly used medications in the outpatient setting and (b) provide recommendations for safe tablet-splitting prescribing practices. Ten random tablets from each of the selected medications were weighed and split by 5 volunteers (2 men and 3 women aged 25-44 years) using a knife. The selected medications were mirtazapine 30 mg, bromazepam 3 mg, oxcarbazepin 150 mg, sertraline 50 mg, carvedilol 25 mg, bisoprolol fumarate 10 mg, losartan 50 mg, digoxin 0.25 mg, amiodarone HCl 200 mg, metformin HCl 1,000 mg, glimepiride 4 mg, montelukast 10 mg, ibuprofen 600 mg, celecoxib 200 mg, meloxicam 15 mg, and sildenafil citrate 50 mg. The resulting half tablets were evaluated for weight and drug content uniformity in accordance with proxy United States Pharmacopeia (USP) specification (95%-105% for digoxin and 90%-110% for the other 15 drugs). Weight and drug content uniformity were assessed by comparing weight or drug content of the half tablets with one-half of the mean weight or drug content for all whole tablets in the sample. The percentages by which the weight and drug content of each whole tablet or half tablet differed from sample mean values were calculated. Other relevant physical characteristics of the 16 products were measured. A total of 52 of 320 half tablets (16.2%) and 48 of 320 half tablets (15.0%) fell outside of the proxy USP specification for weight and drug content, respectively. Bromazepam, carvedilol, bisoprolol, losartan, digoxin, and meloxicam half tablets failed the weight and content uniformity test; however, the half tablets for the rest of the medications passed the test. Mean percent weight loss after

Optical and terahertz measurement techniques for flat-faced pharmaceutical tablets: a case study of gloss, surface roughness and bulk properties of starch acetate tablets

International Nuclear Information System (INIS)

Juuti, M; Tuononen, H; Kontturi, V; Peiponen, K-E; Prykäri, T; Alarousu, E; Myllylä, R; Kuosmanen, M; Ketolainen, J

2009-01-01

Surface and bulk properties of flat-faced starch acetate tablets were studied. For surface quality inspection optical coherence tomography and recently developed diffractive glossmeter were utilized. Both these optical devices together provide local information on surface roughness and gloss of a tablet over a measured area. The concepts of mean topography and mean gloss profile for surface quality of a tablet are introduced. It was observed that the surface quality of the tablet varies, and compression at high pressure may not guarantee a good surface quality of the tablet. Using novel statistical parameters for gloss and relevant surface roughness parameter, it is possible to get more comprehensive quantitative data on the surface condition of a tablet. THz spectrometer was utilized for detection of THz pulse delay in transmission measurement mode from the tablets. The delay time and thickness ratio of the tablet are consistent with the porosity of the tablet as a function of compression pressure. We suggest that the multimeasurement scheme using three different devices helps tablet makers to better assess bulk and surface quality of their products

Orodispersible tablets containing taste-masked solid lipid pellets with metformin hydrochloride: Influence of process parameters on tablet properties.

Science.gov (United States)

Petrovick, Gustavo Freire; Kleinebudde, Peter; Breitkreutz, Jörg

2018-01-01

Compaction of multiparticulates into tablets, particularly into orodispersible tablets (ODTs), is challenging. The compression of pellets, made by solid lipid extrusion/spheronization processes, presents peculiar difficulties since solid lipids usually soften or melt at relatively low temperature ranges and due to applied mechanical forces. Until now, there are no reports in literature about the development of ODTs based on solid lipid pellets. To investigate the feasibility of producing such tablets, a design of experiment (DoE) approach was performed to elucidate the influence of compression force and amount of two co-processed excipients (Ludiflash ® and Parteck ® ODT) on properties of the tablets (friability, tensile strength, and disintegration time). ODTs (15 mm, flat-faced) with solid lipid pellets (250-1000 µm in diameter) containing 500 mg of metformin HCl, presenting immediate drug release profile and taste-masked properties, were targeted. During compression, a strong lamination of the tablets containing Parteck ® ODT was observed. This phenomenon was prominently observed when high compression forces (≥5 kN) and high excipient amounts (≥40%; w/w) were used. On the other hand, the DoE focused on tablets with Ludiflash ® showed better results regarding the production of ODTs. A positive influence of the compression force on the tensile strength and disintegration time of the tablets, regarding specifications of the Ph. Eur., was observed. The increase in the amount of this excipient resulted in fast disintegrating tablets, however, a negative influence on the tensile strength was noticed. After optimization of the parameters and formulation, based on the DoE results and considering the Ph. Eur. specifications for tablets, ODTs based on lipid pellets containing metformin HCl presenting immediate release profile (85% drug release in less than 30 min) and taste-masked properties (determined by an electronic tongue) were successfully

Challenges in detecting magnesium stearate distribution in tablets.

Science.gov (United States)

Lakio, Satu; Vajna, Balázs; Farkas, István; Salokangas, Henri; Marosi, György; Yliruusi, Jouko

2013-03-01

Magnesium stearate (MS) is the most commonly used lubricant in pharmaceutical industry. During blending, MS particles form a thin layer on the surfaces of the excipient and drug particles prohibiting the bonding from forming between the particles. This hydrophobic layer decreases the tensile strength of tablets and prevents water from penetrating into the tablet restraining the disintegration and dissolution of the tablets. Although overlubrication of the powder mass during MS blending is a well-known problem, the lubricant distribution in tablets has traditionally been challenging to measure. There is currently no adequate analytical method to investigate this phenomenon. In this study, the distribution of MS in microcrystalline cellulose (MCC) tablets was investigated using three different blending scales. The crushing strength of the tablets was used as a secondary response, as its decrease is known to result from the overlubrication. In addition, coating of the MCC particles by MS in intact tablets was detected using Raman microscopic mapping. MS blending was more efficient in larger scales. Raman imaging was successfully applied to characterize MS distribution in MCC tablets despite low concentration of MS. The Raman method can provide highly valuable visual information about the proceeding of the MS blending process. However, the measuring set-up has to be carefully planned to establish reliable and reproducible results.

Systematic evaluation of common lubricants for optimal use in tablet formulation.

Science.gov (United States)

Paul, Shubhajit; Sun, Changquan Calvin

2018-05-30

As an essential formulation component for large-scale tablet manufacturing, the lubricant preserves tooling by reducing die-wall friction. Unfortunately, lubrication also often results in adverse effects on tablet characteristics, such as prolonged disintegration, slowed dissolution, and reduced mechanical strength. Therefore, the choice of lubricant and its optimal concentration in a tablet formulation is a critical decision in tablet formulation development to attain low die-wall friction while minimizing negative impact on other tablet properties. Three commercially available tablet lubricants, i.e., magnesium stearate, sodium stearyl fumerate, and stearic acid, were systematically investigated in both plastic and brittle matrices to elucidate their effects on reducing die-wall friction, tablet strength, tablet hardness, tablet friability, and tablet disintegration kinetics. Clear understanding of the lubrication efficiency of commonly used lubricants as well as their impact on tablet characteristics would help future tablet formulation efforts. Copyright © 2018 Elsevier B.V. All rights reserved.

Portable Tablets in Science Museum Learning

DEFF Research Database (Denmark)

Gronemann, Sigurd Trolle

2016-01-01

Despite the increasing use of portable tablets in learning, their impact has received little attention in research. In five different projects, this media-ethnographic and design-based analysis of the use of portable tablets as a learning resource in science museums investigates how young people...... is identified. It is argued that, paradoxically, museums’ decisions to innovate by introducing new technologies, such as portable tablets, and new pedagogies to support them conflict with many young people’s traditional ideas of museums and learning. The assessment of the implications of museums’ integration...... of portable tablets indicates that in making pedagogical transformations to accommodate new technologies, museums risk opposing didactic intention if pedagogies do not sufficiently attend to young learners’ systemic expectations to learning and to their expectations to the digital experience influenced...

The Formulation of Diclofenac Sodium Hydrogel Tablets | Onyechi ...

African Journals Online (AJOL)

The dissolution data fitted to Higuchi and Hixson-Crowell equations indicating the existence of diffusion mechanism controlling diclofenac release from the tablets. Keywords: Sustained release, diclofenac sodium hydrogel tablets, Voltarol retard tablets, film coating, dissolution profiles. Nigerian Journal of Pharmaceutical ...

Key Technical Aspects Influencing the Accuracy of Tablet Subdivision.

Science.gov (United States)

Teixeira, Maíra T; Sá-Barreto, Lívia C L; Gratieri, Taís; Gelfuso, Guilherme M; Silva, Izabel C R; Cunha-Filho, Marcílio S S

2017-05-01

Tablet subdivision is a common practice used mainly for dose adjustment. The aim of this study was to investigate how the technical aspects of production as well as the method of tablets subdivision (employing a tablet splitter or a kitchen knife) influence the accuracy of this practice. Five drugs commonly used as subdivided tablets were selected. For each drug, the innovator drug product, a scored-generic and a non-scored generic were investigated totalizing fifteen drug products. Mechanical and physical tests, including image analysis, were performed. Additionally, comparisons were made between tablet subdivision method, score, shape, diluent composition and coating. Image analysis based on surface area was a useful tool as an alternative assay to evaluate the accuracy of tablet subdivision. The tablet splitter demonstrates an advantage relative to a knife as it showed better results in weight loss and friability tests. Oblong, coated and scored tablets had better results after subdivision than round, uncoated and non-scored tablets. The presence of elastic diluents such as starch and dibasic phosphate dehydrate conferred a more appropriate behaviour for the subdivision process than plastic materials such as microcrystalline cellulose and lactose. Finally, differences were observed between generics and their innovator products in all selected drugs with regard the quality control assays in divided tablet, which highlights the necessity of health regulations to consider subdivision performance at least in marketing authorization of generic products.

Composition profiling of seized ecstasy tablets by Raman spectroscopy.

Science.gov (United States)

Bell, S E; Burns, D T; Dennis, A C; Matchett, L J; Speers, J S

2000-10-01

Raman spectroscopy with far-red excitation has been investigated as a simple and rapid technique for composition profiling of seized ecstasy (MDMA, N-methyl-3,4-methylenedioxyamphetamine) tablets. The spectra obtained are rich in vibrational bands and allow the active drug and excipient used to bulk the tablets to be identified. Relative band heights can be used to determine drug/excipient ratios and the degree of hydration of the drug while the fact that 50 tablets per hour can be analysed allows large numbers of spectra to be recorded. The ability of Raman spectroscopy to distinguish between ecstasy tablets on the basis of their chemical composition is illustrated here by a sample set of 400 tablets taken from a large seizure of > 50,000 tablets that were found in eight large bags. The tablets are all similar in appearance and carry the same logo. Conventional analysis by GC-MS showed they contained MDMA. Initial Raman studies of samples from each of the eight bags showed that despite some tablet-to-tablet variation within each bag the contents could be classified on the basis of the excipients used. The tablets in five of the bags were sorbitol-based, two were cellulose-based and one bag contained tablets with a glucose excipient. More extensive analysis of 50 tablets from each of a representative series of sample bags have distribution profiles that showed the contents of each bag were approximately normally distributed about a mean value, rather than being mixtures of several discrete types. Two of the sorbitol-containing sample sets were indistinguishable while a third was similar but not identical to these, in that it contained the same excipient and MDMA with the same degree of hydration but had a slightly different MDMA/sorbitol ratio. The cellulose-based samples were badly manufactured and showed considerable tablet-to-tablet variation in their drug/excipient ratio while the glucose-based tablets had a tight distribution in their drug/excipient ratios

Optimization of the formulation of fast disintegrating tablets

NARCIS (Netherlands)

Kamp, Herman Vincent van

1987-01-01

Chapter 1 presents general information on tableting and is an introduction to the other chapters. Chapter 2 covers the mechanism of action of tablet disintegrants, in particular modern super disintegrants. The results indicate that when the tablets contain a slightly swelling but hydrophilic

Tablet Keiti: Does it Contain Astronomical Instructions?

DEFF Research Database (Denmark)

Wieczorek, Rafal

2010-01-01

Ethnographic data collected on Easter Island in the late XIX and first half of the XX century suggest that the extant rongorongo tablets contain songs, legends or other chanted traditions. However, we have yet to succeed in relating any one of the rongorongo texts to one of the many legends...... collected by ethnographers. An interesting observation is that, while none of the Rapanuis with whom early visitors to the island were acquainted mentioned anything about astronomy in the context of rongorongo tablets, the only piece of rongorongo texts whose meaning we are certain of is the “calendar...... tablet Mamari”. In the four lines of this tablet, also known as rongorongo text C, we encounter 30 moon glyphs arranged in a pattern that mirrors the Rapa Nui lunar calendar as recorded by early Western visitors. This presentation argues that yet another rongorongo item – tablet Keiti, also known as text...

The accuracy, precision and sustainability of different techniques for tablet subdivision: breaking by hand and the use of tablet splitters or a kitchen knife.

Science.gov (United States)

van Riet-Nales, Diana A; Doeve, Myrthe E; Nicia, Agnes E; Teerenstra, Steven; Notenboom, Kim; Hekster, Yechiel A; van den Bemt, Bart J F

2014-05-15

Tablets are frequently subdivided to lower the dose, to facilitate swallowing by e.g. children or older people or to save costs. Splitting devices are commonly used when hand breaking is difficult or painful. Three techniques for tablet subdivision were investigated: hand breaking, tablet splitter, kitchen knife. A best case drug (paracetamol), tablet (round, flat, uncoated, 500 mg) and operator (24-year student) were applied. Hundred tablets were subdivided by hand and by three devices of each of the following types: Fit & Healthy, Health Care Logistics, Lifetime, PillAid, PillTool, Pilomat tablet splitter; Blokker kitchen knife. The intra and inter device accuracy, precision and sustainability were investigated. The compliance to (adapted) regulatory requirements was investigated also. The accuracy and precision of hand broken tablets was 104/97% resp. 2.8/3.2% (one part per tablet considered; parts right/left side operator). The right/left accuracies of the splitting devices varied between 60 and 133%; the precisions 4.0 and 29.6%. The devices did not deteriorate over 100-fold use. Only hand broken tablets complied with all regulatory requirements. Health care professionals should realize that tablet splitting may result in inaccurate dosing. Authorities should undertake appropriate measures to assure good function of tablet splitters and, where feasible, to reduce the need for their use. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Controlled-release tablet formulation of isoniazid.

Science.gov (United States)

Jain, N K; Kulkarni, K; Talwar, N

1992-04-01

Guar (GG) and Karaya gums (KG) alone and in combination with hydroxy-propylmethylcellulose (HPMC) were evaluated as release retarding materials to formulate a controlled-release tablet dosage form of isoniazid (1). In vitro release of 1 from tablets followed non-Fickian release profile with rapid initial release. Urinary excretion studies in normal subjects showed steady-state levels of 1 for 13 h. In vitro and in vivo data correlated (r = 0.9794). The studies suggested the potentiality of GG and KG as release retarding materials in formulating controlled-release tablet dosage forms of 1.

Pediatric Dispersible Tablets: a Modular Approach for Rapid Prototyping.

Science.gov (United States)

Buck, Jonas; Huwyler, Jörg; Kühl, Peter; Dischinger, Angela

2016-08-01

The design of pediatric formulations is challenging. Solid dosage forms for children have to meet the needs of different ages, e.g. high number of dosing increments and strengths. A modular formulation strategy offering the possibility of rapid prototyping was applied. Different tablet compositions and the resulting tablet characteristics were investigated for dispersible tablets using customized analytical methods. Fluid bed granules were blended with extragranular components, and compressed to tablets. Disintegration behavior was studied with a Texture Analyzer and a Tensiometer. Methods for determination of disintegration time and water uptake of tablets were developed with a Texture Analyzer, and a Tensiometer, respectively. Twenty-two different tablet formulations were prepared and analyzed with respect to disintegration time, hardness, friability, and viscosity. Multivariate data analysis revealed a high impact of type and amount of viscosity enhancer on the disintegration behavior of tablets. An optimized formulation was selected with a disintegration time of 24 s. Methods providing additional information on the disintegration behavior of dispersible tablets compared to standard pharmacopoeia methods were established. Selecting the right type and level of viscosity enhancer and superdisintegrant was critical for developing pediatric tablets with a disintegration time of less than 30 s but still pleasant mouth feel.

Ispaghula Husk-Based Extended Release Tablets of Diclofenac ...

African Journals Online (AJOL)

Purpose: To formulate extended-release tablets of diclofenac sodium based on ispaghula husk. Methods: Tablets with varying proportions of diclofenac sodium and ispaghula husk were formulated by wet granulation technique at a fixed compression force of 10 kN. The formulated tablets were evaluated for ...

Double-layer Tablets of Lornoxicam: Validation of Quantification ...

African Journals Online (AJOL)

Double-layer Tablets of Lornoxicam: Validation of Quantification Method, In vitro Dissolution and Kinetic Modelling. ... Satisfactory results were obtained from all the tablet formulations met compendial requirements. The slowest drug release rate was obtained with tablet cores based on PVP K90 (1.21 mg%.h-1).

The variability of ecstasy tablets composition in Brazil.

Science.gov (United States)

Togni, Loraine R; Lanaro, Rafael; Resende, Rodrigo R; Costa, Jose L

2015-01-01

The content of ecstasy tablets has been changing over the years, and nowadays 3,4-methylenedioxymethamphetamine (MDMA) is not always present in the tablets. The aim of this study was to investigate the chemical composition in the seized tablets labeled as ecstasy. We analyzed samples from 150 different seizures made by Sao Paulo's State Police by gas chromatography-mass spectrometry. MDMA was present in 44.7% of the analyzed samples, and another twenty different active substances were identified in these tablets, such as caffeine, 2C-B, piperazines, amphetamines, phencyclidine, and others. Methamphetamine was present in 22% of these samples. The results demonstrate a huge shift in the pattern of trafficking of synthetic drugs, where MDMA has been replaced in tablets mostly by illicit psychoactive substances, in a clear attempt to bypass the law. The great variability in the tablets composition may lead to an increased risk of drug poisoning. © 2014 American Academy of Forensic Sciences.

Pharmaceutical and analytical evaluation of triphalaguggulkalpa tablets

OpenAIRE

Savarikar, Shreeram S.; Barbhind, Maneesha M.; Halde, Umakant K.; Kulkarni, Alpana P.

2011-01-01

Aim of the Study: Development of standardized, synergistic, safe and effective traditional herbal formulations with robust scientific evidence can offer faster and more economical alternatives for the treatment of disease. The main objective was to develop a method of preparation of guggulkalpa tablets so that the tablets meet the criteria of efficacy, stability, and safety. Materials and Methods: Triphalaguggulkalpa tablet, described in sharangdharsanhita and containing guggul and triphala p...

Electronic acquisition of OSCE performance using tablets

Directory of Open Access Journals (Sweden)

Hochlehnert, Achim

2015-10-01

Full Text Available Background: Objective Structured Clinical Examinations (OSCEs often involve a considerable amount of resources in terms of materials and organization since the scores are often recorded on paper. Computer-assisted administration is an alternative with which the need for material resources can be reduced. In particular, the use of tablets seems sensible because these are easy to transport and flexible to use.Aim: User acceptance concerning the use of tablets during OSCEs has not yet been extensively investigated. The aim of this study was to evaluate tablet-based OSCEs from the perspective of the user (examiner and the student examinee.Method: For two OSCEs in Internal Medicine at the University of Heidelberg, user acceptance was analyzed regarding tablet-based administration (satisfaction with functionality and the subjective amount of effort as perceived by the examiners. Standardized questionnaires and semi-standardized interviews were conducted (complete survey of all participating examiners. In addition, for one OSCE, the subjective evaluation of this mode of assessment was gathered from a random sample of participating students in semi-standardized interviews.Results: Overall, the examiners were very satisfied with using tablets during the assessment. The subjective amount of effort to use the tablet was found on average to be “hardly difficult”. The examiners identified the advantages of this mode of administration as being in particular the ease of use and low rate of error. During the interviews of the examinees, acceptance for the use of tablets during the assessment was also detected.Discussion: Overall, it was found that the use of tablets during OSCEs was well accepted by both examiners and examinees. We expect that this mode of assessment also offers advantages regarding assessment documentation, use of resources, and rate of error in comparison with paper-based assessments; all of these aspects should be followed up on in

Formulation and evaluation of glipizide floating-bioadhesive tablets

Directory of Open Access Journals (Sweden)

Jayvadan K. Patel

2010-10-01

Full Text Available The purpose of this study was formulation and in vitro evaluation of floating-bioadhesive tablets to lengthen the stay of glipizide in its absorption area. Effervescent tablets were made using chitosan (CH, hydroxypropyl methylcellulose (HPMC, carbopolP934 (CP, polymethacrylic acid (PMA, citric acid, and sodium bicarbonate. Tablets with 5% effervescent base had longer lag time than 10%. The type of polymer had no significant effect on the floating lag time. All tablets floated atop the medium for 23-24 hr. Increasing carbopolP934 caused higher bioadhesion than chitosan (p < 0.05. All formulations showed a Higuchi, non-Fickian release mechanism. Tablets with 10% effervescent base, 80% CH/20% HPMC, or 80% CP/20% PMA seemed desirable.

Breaking of scored tablets : a review

NARCIS (Netherlands)

van Santen, E; Barends, D M; Frijlink, H W

The literature was reviewed regarding advantages, problems and performance indicators of score lines. Scored tablets provide dose flexibility, ease of swallowing and may reduce the costs of medication. However, many patients are confronted with scored tablets that are broken unequally and with

Feasibility of mini-tablets as a flexible drug delivery tool.

Science.gov (United States)

Mitra, Biplob; Chang, Jessica; Wu, Sy-Juen; Wolfe, Chad N; Ternik, Robert L; Gunter, Thomas Z; Victor, Michael C

2017-06-15

Mini-tablets have potential applications as a flexible drug delivery tool in addition to their generally perceived use as multi-particulates. That is, mini-tablets could provide flexibility in dose finding studies and/or allow for combination therapies in the clinic. Moreover, mini-tablets with well controlled quality attributes could be a prudent choice for administering solid dosage forms as a single unit or composite of multiple mini-tablets in patient populations with swallowing difficulties (e.g., pediatric and geriatric populations). This work demonstrated drug substance particle size and concentration ranges that achieve acceptable mini-tablet quality attributes for use as a single or composite dosage unit. Immediate release and orally disintegrating mini-tablet formulations with 30μm to 350μm (particle size d 90 ) acetaminophen and Compap™ L (90% acetaminophen) at concentrations equivalent to 6.7% and 26.7% acetaminophen were evaluated. Mini-tablets achieved acceptable weight variability, tensile strength, friability, and disintegration time at a reasonable solid fraction for each formulation. The content uniformity was acceptable for mini-tablets of 6.7% formulations with ≤170μm drug substance, mini-tablets of all 26.7% formulations, and composite dosage units containing five or more mini-tablets of any formulation. Results supported the manufacturing feasibility of quality mini-tablets, and their applicability as a flexible drug delivery tool. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of Tablets Divisibility in Pharmacoeconomic Aspects

Directory of Open Access Journals (Sweden)

Omer Yemsen

2013-10-01

Full Text Available Aim: Divisibility and dose homogeneity in scored tablets which form a part of the drugs those are in tablet forms in Turkey and have an extensive implementation area in drug therapy have a high importance for patient compliance and safety. In this study, it is aimed to evaluate Turkey%u2019s pharmaceutical market about cost differences of dividing scored tablets which has different unit quantities of the same active substance. Material and Method: In Turkey%u2019s pharmaceutical market, to detect cost differences of dividing scored tablets which has different unit quantities of the same active substance, All Drug%u2019s Price List that has been published on Turkish Medicine and Medical Devices Agency%u2019s web site is evaluated by using cost-minimization analysis method. Results: It is determined that the use of scored tablets make a price advantage of about 70%. Discussion: In conclusion, on package leaflets and outer packaging information those are prepared for the use of patients, the warning %u201CDon%u2019t divide, crack or swallow the tablets unless otherwise recommended by your doctor.%u201D should be stated and it is considered that it would be useful if the patient is informed about divisibility by the pharmacist.

Android Tablet Application Development For Dummies

CERN Document Server

Felker, Donn

2011-01-01

Get up to speed on the hottest opportunity in the application development arena App development for tablets is a booming business. Android tablets, including the popular Motorola Xoom, are gaining market share at breakneck speed, and this book can have even novice programmers creating great Android apps specifically for tablets quickly and easily. A little Java knowledge is helpful but not essential to get started creating apps. Android expert Donn Felker helps you get the Android environment up and running, use XML to create application menus, create an icon for your app, and submit your app

Development and validation of spectrophotometric method for assay determination and in vitro dissolution studies of sofosbuvir tablets

International Nuclear Information System (INIS)

Zaman, B.; Hassan, W.; Noreen, H.

2017-01-01

In vitro dissolution of sofosbuvir 400 mg tablets dosage form was performed, using USP dissolution apparatus type-II (paddle type), at 75rpm ± 4 %, and 900mL ± 1%, 0.05 M phosphate buffer pH 6.8 ± 0.05 equilibrated at 37.0 ± 0.5ºC as dissolution medium. Percentage of dissolved sofosbuvir as a function of time was determined using the straight line equation and linear regression using zero order and first order ANOVA based kinetics model. Comparative dissolution studies on two different generic brands A and B was performed comparing the drug release profile with innovator brand Sovaldi 400 mg tablets. The comparison of dissolution profiles was evaluated using model independent approach. The values of similarity factor f2 were (4 and 3) and the difference factor f1 were (64 and 50) for both generic products A and B respectively. A simple and precise spectrophotometric method was developed for estimation of sofosbuvir in dissolution medium based on spectrophotometric detection at wavelength 262 nm. The specific absorbance (A = 1%) of sofosbuvir was 178.5 ± 4% and Beer’s law was obeyed in the concentration ranges 4µg mL−1 to 48µg mL−1. The method was validated appropriately for accuracy, precision, linearity, and specificity, according the guidelines of United State Pharmacopoeia and International Conference on Harmonization. The calibration curve was linear with correlation coefficient (r > 0.9999) and there was no spectral interference from excipients present in the tablets dosage form. This method is precise, rapid and specific for determination of sofosbuvir in tablets dosage form and successfully applied for assay determination and in vitro dissolution studies. (author)

Pharmaceutical equivalence of gabapentin tablets with various extragranular binders Pharmaceutical equivalence of gabapentin tablets with various extragranular binders

Directory of Open Access Journals (Sweden)

SWATI C. JAGDALE

2010-06-01

Full Text Available Gabapentin is a high-dose drug widely used as an oral anti-epilepticagent. Due to high crystalline and has poor compaction properties it is difficult to form tablets by direct compression. The aim of this study was to develop gabapentin tablets, pharmaceutically equivalent to the reference product Neurontin (marketed in USA. Gabapentin 800mg tablets were produced by wet granulation by keeping intragranular binder as well as its concentration constant and by changing with various extragranular binders with its concentration (A = PVPK 30, B = HPMC 15 cps, C = Kollidon VA 64, D =Klucel EXF.The tablet having no weight, thickness and hardness variation and having appropriate, friability as well as disintegration profile were coated with a 3% film coating solution .Seven formulations F1 (A in lower concentration F2 (A in higher concentration, F3 (B in lower concentration and F4 (B in higher concentration, F5 (C in lower concentration, F6 (C in higher concentration, F7 (D in lower concentration were formulated. Among them F6 demonstrated adequate hardness, friability, disintegration, uniformity of content, and total drug dissolution after 45minutes. The dissimilarity factor (f1 is 5.93 and the similarity factor (f2 is 67.85. So F6 was found to be equivalent to Neurontin.Gabapentin is widely used as an oral anti-epileptic agent. However, owing to its high crystallinity and poor compaction properties, it is difficult to form tablets of this drug by direct compression. The aim of this study was to develop gabapentin tablets, pharmaceutically equivalent to the brand-name pioneer product Neurontin® (marketed in USA. Gabapentin 800mg tablets were produced by wet granulation with a constant concentration of intragranular binder and a varying concentration of extragranular binders (A = polyvinylpyrrolidone K30, B = hydroxypropylmethylcellulose 15 cps, C = Kollidon VA64, D =Klucel EXF. The tablets that did not vary in weight, thickness or hardness and had

ESR accident dosimetry using medicine tablets coated with sugar

International Nuclear Information System (INIS)

Kai, A.; Miki, T.; Ikeya, M.

1990-01-01

Properties of radiation-induced radicals in medicine tablets were investigated using electron spin resonance (ESR). A sharp ESR signal sensitive to gamma ray irradiation was observed in the sugar coating part of the tablets. The signal has anisotropic g values of g 1 = 2.0009, g 2 = 2.0007 and g 3 = 2.0002. The signal grows linearly with dose at least up to about 20 Gy. No fading was observed at room temperature even when exposed to sunlight. The dose to artificially irradiated tablets was estimated using the signal intensity and a previously determined calibration curve. The signal in sugar coated tablets can be utilised for dose measurements. In particular, the wide distribution of sugar coated tablets allows the use of the tablets as accident dosemeters. (author)

Galileo's Telescopy and Jupiter's Tablet

Science.gov (United States)

Usher, P. D.

2003-12-01

A previous paper (BAAS 33:4, 1363, 2001) reported on the dramatic scene in Shakespeare's Cymbeline that features the descent of the deity Jupiter. The paper suggested that the four ghosts circling the sleeping Posthumus denote the four Galilean moons of Jupiter. The god Jupiter commands the ghosts to lay a tablet upon the prone Posthumus, but says that its value should not be overestimated. When Posthumus wakens he notices the tablet, which he calls a "book." Not only has the deity's "tablet" become the earthling's "book," but it appears that the book has covers which Posthumus evidently recognizes because without even opening the book he ascribes two further properties to it: rarity, and the very property that Jupiter had earlier attributed, viz. that one must not read too much into it. The mystery deepens when the Jovian gift undergoes a second metamorphosis, to "label." With the help of the OED, the potentially disparate terms "tablet," "book," and "label," may be explained by terms appropriate either to supernatural or worldly beings. "Tablet" may recognize the Mosaic artifact, whereas "book" and "label" are probably mundane references to Galileo's Sidereus Nuncius which appeared shortly before Cymbeline. The message of the Olympian god indicates therefore that the book is unique even as its contents have limited value. The first property celebrates the fact that Galileo's book is the first of its kind, and the second advises that all results except the discovery of Jupiter's moons have been reported earlier, in Hamlet.

Does the performance of wet granulation and tablet hardness affect the drug dissolution profile of carvedilol in matrix tablets?

Science.gov (United States)

Košir, Darjan; Ojsteršek, Tadej; Vrečer, Franc

2018-06-14

Wet granulation is mostly used process for manufacturing matrix tablets. Compared to the direct compression method, it allows for a better flow and compressibility properties of compression mixtures. Granulation, including process parameters and tableting, can influence critical quality attributes (CQAs) of hydrophilic matrix tablets. One of the most important CQAs is the drug release profile. We studied the influence of granulation process parameters (type of nozzle and water quantity used as granulation liquid) and tablet hardness on the drug release profile. Matrix tablets contained HPMC K4M hydrophilic matrix former and carvedilol as a model drug. The influence of selected HPMC characteristics on the drug release profile was also evaluated using two additional HPMC batches. For statistical evaluation, partial least square (PLS) models were generated for each time point of the drug release profile using the same number of latent factors. In this way, it was possible to evaluate how the importance of factors influencing drug dissolution changes in dependence on time throughout the drug release profile. The results of statistical evaluation show that the granulation process parameters (granulation liquid quantity and type of nozzle) and tablet hardness significantly influence the release profile. On the other hand, the influence of HPMC characteristics is negligible in comparison to the other factors studied. Using a higher granulation liquid quantity and the standard nozzle type results in larger granules with a higher density and lower porosity, which leads to a slower drug release profile. Lower tablet hardness also slows down the release profile.

[The effects of various factors on the in vitro velocity of drug release from repository tablets. Part 4: Isoniazid (Rimicid) respository tablets (author's transl)].

Science.gov (United States)

Tomassini, L; Michailova, D; Naplatanova, D; Slavtschev, P

1979-12-01

The authors investigated the release of isoniazid from repository tablets as related to form, processing technology, strength constant and storage for 5 years. On determining the diffusion coefficient (D), the initial dissolution rate (Vo) and the time required for the diffusion of the releasing medium to the middle of the tablet (t1/2), it was found that the difference in release rate between the flat and the biconvex tablets is small. Furthermore, it was stated that the three-layer tablets have very high D and Vo values and very low t1/2 values, for what reason they are unsuited for repository tablets of the composition under investigation. Moreover, it was found that an increase of the strength constant does not affect the D, t1/2 and Vo values, and that the release of isoniazid is retarded only in flat tablets with the highest strength constant. Storage exerts no effect on the drug release from these tablets. The industrial production of these tablets is under way.

To Study Capping or Lamination Tendency of Tablets Through Evaluation of Powder Rheological Properties and Tablet Mechanical Properties of Directly Compressible Blends.

Science.gov (United States)

Dudhat, Siddhi M; Kettler, Charles N; Dave, Rutesh H

2017-05-01

Air entrapment efficiency of the powders is one of the main factors leading to occurrence of capping or lamination tendency of tablets manufactured from the directly compressible powder blends. The purpose of the current research was to study this underlying cause leading to occurrence of capping or lamination of tablets through evaluation of powder rheological properties. Powder blends were prepared by addition of 0% w/w to 100% w/w of individual active pharmaceutical ingredient (API) [two model API: acetaminophen (APAP) and ibuprofen (IBU)] with microcrystalline cellulose without and with 0.5% w/w Magnesium Stearate as lubricant. Powder rheological properties were analyzed using FT4 Powder Rheometer for dynamic, bulk, and shear properties. Tablet mechanical properties of the respective blends were studied by determining the ability of the material to form tablet of specific strength under applied compaction pressure through tabletability profile. The results showed that powder rheometer distinguished the powder blends based on their ability to relieve entrapped air along with the distinctive flow characteristics. Powder blend prepared with increasing addition of APAP displayed low powder permeability as compared to IBU blends with better powder permeability, compressibility and flow characteristics. Also, lubrication of the APAP blends did not ease their ability to relieve air. Tabletability profiles revealed the potential occurrence of capping or lamination in tablets prepared from the powder blends with high APAP content. This study can help scientist to understand tableting performance at the early-developmental stages and can avoid occurrence capping and lamination of tablets.

Biowaiver extension potential to BCS Class III high solubility-low permeability drugs: bridging evidence for metformin immediate-release tablet.

Science.gov (United States)

Cheng, Ching-Ling; Yu, Lawrence X; Lee, Hwei-Ling; Yang, Chyun-Yu; Lue, Chang-Sha; Chou, Chen-Hsi

2004-07-01

The biopharmaceutics classification system (BCS) allows biowaiver for rapid dissolving immediate-release (IR) products of Class I drugs (high solubility and high permeability). The possibility of extending biowaivers to Class III high solubility and low permeability drugs is currently under scrutiny. In vivo bioequivalence data of different formulations of Class III drugs would support such an extension. The objective of this work was to demonstrate the bioequivalence of two marketed IR tablet products of a Class III drug, metformin hydrochloride, that are rapidly dissolving and have similar in vitro dissolution profiles. The effect of race on the systemic exposure of metformin was also explored. A randomized, open-label, two-period crossover study was conducted in 12 healthy Chinese male volunteers. Each subject received a single-dose of 500 mg of each product after an overnight fasting. The plasma concentrations of metformin were followed for 24 h. No significant formulation effect was found for the bioequivalence metrics: areas under concentration-time curve (AUC0-t, AUC0-infinity) and maximal concentration (Cmax). The 90% confidence intervals for the ratio of means were found within the acceptance range of 80-125% for the log-transformed data. Based on these results, it was concluded that the two IR products are bioequivalent. The pharmacokinetic parameters of metformin in Chinese for both products were similar and were in good agreement with those reported for metformin IR tablets in other ethnic populations. This study serves as an example for supporting biowaiver for BCS Class III drugs.

Carbon Break Even Analysis: Environmental Impact of Tablets in Higher Education

OpenAIRE

Fadi Safieddine; Imad Nakhoul

2016-01-01

With the growing pace of tablets use and the large focus it is attracting especially in higher education, this paper looks at an important aspect of tablets; their carbon footprint. Studies have suggested that tablets have positive impact on the environment; especially since tablets use less energy than laptops or desktops. Recent manufacturers’ reports on the carbon footprint of tablets have revealed that a significant portion, as much as 80%, of the carbon footprint of tablets comes from pr...

Giving Iron Tablets by Health Worker and Pregnant Compliance in Consuming More Than 90 Tablets, in The Slum Urban, in The West Java Province and Yogyakarta

Directory of Open Access Journals (Sweden)

Tumaji Tumaji

2015-03-01

Full Text Available ABSTRAKLatar Belakang: Angka kematian ibu di Indonesia saat ini masih cukup tinggi dan sangat bervariasi di tingkat provinsi. Provinsi Jawa Barat (Jabar merupakan penyumbang kematian ibu terbesar yaitu 19,8%, sedangkan yang relatif kecil adalah Provinsi Daerah Istimewa Yogyakarta (DIY yaitu 1,1%. Mencegah anemia pada ibu hamil dengan minum tablet besi ≥ 90 selama hamil diharapkan mampu menekan kematian ibu akibat perdarahan. Tujuan: Membandingkan pemberian tablet zat besi oleh tenaga kesehatan dan kepatuhan ibu hamil mengonsumsinya, di daerah kumuh perkotaan di Provinsi Jabar dan DIY. Metode: Penelitian ini merupakan analisis lanjut objek dengan sampel dari data hasil Riskesdas 2010. Hasil: Berdasarkan karakteristik, sebagian besar ibu di Provinsi DIY berpendidikan tingkat menengah, bekerja sebagai wiraswasta/tani/nelayan/buruh. Sedangkan di Provinsi Jabar, sebagian besar hanya berpendidikan rendah dan tidak memiliki pekerjaan. Jumlah kepemilikan asuransi kesehatan di Provinsi DIY relatif lebih banyak dibanding di Provinsi jabar. Berdasarkan cakupan pemberian tablet zat besi, tampak bahwa sebagian besar ibu di Provinsi Jabar maupun DIY mendapatkan tablet zat besi selama kehamilannya (84,7% vs 96,0%. Kondisi ini jauh berbeda ketika dilihat dari persentase ibu hamil yang mengonsumsi tablet zat besi minimal 90 tablet. Terlihat bahwa ibu hamil yang mengonsumsi tablet zat besi ≥ 90 di Provinsi Jabar hanya 12,6% saja. Sebaliknya di Provinsi DIY, konsumsi tablet zat besi ≥ 90 persentasenya cukup tinggi yaitu mencapai 60,0%. Kesimpulan: Cakupan pemberian tablet zat besi di kedua provinsi relatif cukup baik, namun konsumsi tablet zat besi ≥ 90 tablet di Provinsi DIY relatif lebih baik dibanding di Provinsi di Jabar. Saran: disarankan pemerintah Provinsi Jabar melakukan promosi dan penyuluhan yang lebih gencar melalui berbagai media serta melakukan terobosan, misalnya dengan menunjuk orang terdekat dari si ibu hamil untuk menjadi pengawas dan

Teach yourself visually Windows 8 tablets

CERN Document Server

McFedries, Paul

2012-01-01

A visual guide to all the features of the new Windows 8 Tablet This must-have resource features visually rich, step-by-step instructions that show you how to get the most enjoyment from your Windows 8 tablet. Learn about the exciting new Metro UI, optimized specifically for touch devices. The most popular and commonly used apps and functions are covered too, along with the basics of syncing with a network, setting up e-mail, watching videos, listening to music, and common productivity tasks. This book provides all the guidance needed to enjoy all the best the new Windows 8 tablets have to offe

Understanding the Delamination Risk of a Trilayer Tablet Using Minipiloting Tools.

Science.gov (United States)

Tao, Jing; Robertson-Lavalle, Sophia; Pandey, Preetanshu; Badawy, Sherif

2017-11-01

A multilayer tablet is one of the formulation options used to mitigate chemical and physical incompatibility between different drug substances. Feasibility studies of multilayer tablets are often conducted using round flat-faced punch tooling. However, the link between different tooling designs and multilayer tablet performance is not well established. This study uses a prototype trilayer tablet and examines tooling design considerations when conducting small-scale studies to gauge the risk of interfacial defects. The impact of tablet weight and dimensions was evaluated to gain understanding of the effect of scale-up/down of tablet size. The factors in tooling selection, including tablet shape, cup depth, and size of embossing were evaluated to gain insight on the impact of tooling design on the interfacial strength of the trilayer tablet. It was found that tablet weight and dimensions can significantly affect the interfacial strength due to their impact on force transmission during compression and the retardation force from the die wall during ejection. Round flat-faced tooling generated trilayer tablets of the strongest interfacial strength compared to typical commercial tablets-oval shaped with concave surfaces. These factors should be accounted for when using round flat compacts to assess the interface risks of a multilayer tablet. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Værsgo' ta' en tablet. Om brugen af tablets i dansk

DEFF Research Database (Denmark)

Lorentzen, Rasmus Fink

2014-01-01

Hvordan kan vi udvikle elevernes faglighed ved hjælp af it? Hvad er det i det hele taget vigtigt at lære i en tidssvarende folkeskole, så eleverne bliver klædt på til fremtidens samfund? Og kan iPads bruges til dette? Dette kapitel handler om fagdidaktik og tablets i undervisningen.......Hvordan kan vi udvikle elevernes faglighed ved hjælp af it? Hvad er det i det hele taget vigtigt at lære i en tidssvarende folkeskole, så eleverne bliver klædt på til fremtidens samfund? Og kan iPads bruges til dette? Dette kapitel handler om fagdidaktik og tablets i undervisningen....

Controlled precipitation for enhanced dissolution rate of flurbiprofen: development of rapidly disintegrating tablets.

Science.gov (United States)

Essa, Ebtessam A; Elmarakby, Amira O; Donia, Ahmed M A; El Maghraby, Gamal M

2017-09-01

The aim of this work was to investigate the potential of controlled precipitation of flurbiprofen on solid surface, in the presence or absence of hydrophilic polymers, as a tool for enhanced dissolution rate of the drug. The work was extended to develop rapidly disintegrated tablets. This strategy provides simple technique for dissolution enhancement of slowly dissolving drugs with high scaling up potential. Aerosil was dispersed in ethanolic solution of flurbiprofen in the presence and absence of hydrophilic polymers. Acidified water was added as antisolvent to produce controlled precipitation. The resultant particles were centrifuged and dried at ambient temperature before monitoring the dissolution pattern. The particles were also subjected to FTIR spectroscopic, X-ray diffraction and thermal analyses. The FTIR spectroscopy excluded any interaction between flurbiprofen and excipients. The thermal analysis reflected possible change in the crystalline structure and or crystal size of the drug after controlled precipitation in the presence of hydrophilic polymers. This was further confirmed by X-ray diffraction. The modulation in the crystalline structure and size was associated with a significant enhancement in the dissolution rate of flurbiprofen. Optimum formulations were successfully formulated as rapidly disintegrating tablet with subsequent fast dissolution. Precipitation on a large solid surface area is a promising strategy for enhanced dissolution rate with the presence of hydrophilic polymers during precipitation process improving the efficiency.

Formulation and Evaluation of Ascorbic acid Tablets by Direct ...

African Journals Online (AJOL)

Formulation and Evaluation of Ascorbic acid Tablets by Direct Compression using Microcrystalline Starch as a Direct Compression Excipient. ... Abstract. PURPOSE: To evaluate the tableting properties of microcrystalline starch (MCS) used as a direct ... RESULTS: Mechanical properties of tablets formulated with MCS were

Bioavailability and stability of erythromycin delayed release tablets.

Science.gov (United States)

Ogwal, S; Xide, T U

2001-12-01

Erythromycin is available as the free base, ethylsuccinate, estolate, stearate, gluceptate, and lactobionate derivatives. When given orally erythromycin and its derivatives except the estolate are inactivated to some extent by the gastric acid and poor absorption may result. To establish whether delayed release erythromycin tablets meet the bioequivalent requirement for the market. Sectrophotometric analysis was used to determine the dissolution percentage of the tablets in vitro. High performance liquid chromatography and IBM/XT microcomputer was used to determine the bioavailability and pharmacokinetic parameters in vivo. Dissolution percentage in thirty minutes reached 28.9% and in sixty minutes erythromycin was completely released. The parameters of the delayed release tablets were Tlag 2.3 hr, Tmax.4.5 hr, and Cmax 2.123 g/ml Ka 0.38048 hr(-1) T (1/2) 1.8 hr, V*C/F 49.721 AUC 12.9155. The relative bioavailability of erythromycin delayed release tablet to erythromycin capsules was 105.31% The content, appearance, and dissolution bioavailability of delayed release erythromycin tablets conforms to the United States pharmacopoeia standards. The tablets should be stored in a cool and dry place in airtight containers and the shelf life is temporarily assigned two years.

21 CFR 520.1200 - Ivermectin, fenbendazole, and praziquantel tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ivermectin, fenbendazole, and praziquantel tablets... Ivermectin, fenbendazole, and praziquantel tablets. (a) Specifications. Each chewable tablet contains either: (1) 68 micrograms (µg) ivermectin, 1.134 grams fenbendazole, and 57 milligrams (mg) praziquantel; or...

Comparative investigations of tablet crushing force testers

DEFF Research Database (Denmark)

Sonnergaard, Jørn; Jensen, C.G.; Poulsen, L.

2005-01-01

The performance of 16 tablet breaking force testers was evaluated in terms of accuracy, reproducibility and repeatability. Three tablet formulations with different plastic or brittle deformation mechanisms and with target breaking forces of 50, 100 and 150 N were tested. Statistically significant...... by the concept of components of variance was 5-7 % depending on the model tablet excipient. The standard deviation within testers (repeatability) was affected by the type of model formulation showing increasing variability with increasing brittleness of the compressed material. No specific effect of altering...

Development and Evaluation of Mucoadhesive Chlorhexidine Tablet ...

African Journals Online (AJOL)

Purpose: To formulate mucoadhesive chlorhexidine tablets and evaluate their drug release characteristics and mechanism. Methods: Chlorhexidine buccal adhesive tablets were prepared by direct compression using a blend of hydroxypropyl methylcellulose (HPMC) and chitosan as the bioadhesive polymers.

Novel platens to measure the hardness of a pentagonal shaped tablet.

Science.gov (United States)

Malladi, Jaya; Sidik, Kurex; Wu, Sutan; McCann, Ryan; Dougherty, Jeffrey; Parab, Prakash; Carragher, Thomas

2017-03-01

Tablet hardness, a measure of the breaking force of a tablet, is based on numerous factors. These include the shape of the tablet and the mode of the application of force. For instance, when a pentagonal-shaped tablet was tested with a traditional hardness tester with flat platens, there was a large variation in hardness measurements. This was due to the propensity of vertices of the tablet to crush, referred to as an "improper break". This article describes a novel approach to measure the hardness of pentagonal-shaped tablets using modified platens. The modified platens have more uniform loading than flat platens. This is because they reduce loading on the vertex of the pentagon and apply forces on tablet edges to generate reproducible tablet fracture. The robustness of modified platens was assessed using a series of studies, which included feasibility and Gauge Repeatability & Reproducibility (R&R) studies. A key finding was that improper breaks, generated frequently with a traditional hardness tester using flat platens, were eliminated. The Gauge R&R study revealed that the tablets tested with novel platens generated consistent values in hardness measurements, independent of batch, hardness level, and day of testing, operator and tablet dosage strength.

Application of face centred central composite design to optimise compression force and tablet diameter for the formulation of mechanically strong and fast disintegrating orodispersible tablets.

Science.gov (United States)

Pabari, Ritesh M; Ramtoola, Zebunnissa

2012-07-01

A two factor, three level (3(2)) face centred, central composite design (CCD) was applied to investigate the main and interaction effects of tablet diameter and compression force (CF) on hardness, disintegration time (DT) and porosity of mannitol based orodispersible tablets (ODTs). Tablet diameters of 10, 13 and 15 mm, and CF of 10, 15 and 20 kN were studied. Results of multiple linear regression analysis show that both the tablet diameter and CF influence tablet characteristics. A negative value of regression coefficient for tablet diameter showed an inverse relationship with hardness and DT. A positive value of regression coefficient for CF indicated an increase in hardness and DT with increasing CF as a result of the decrease in tablet porosity. Interestingly, at the larger tablet diameter of 15 mm, while hardness increased and porosity decreased with an increase in CF, the DT was resistant to change. The optimised combination was a tablet of 15 mm diameter compressed at 15 kN showing a rapid DT of 37.7s and high hardness of 71.4N. Using these parameters, ODTs containing ibuprofen showed no significant change in DT (ANOVA; p>0.05) irrespective of the hydrophobicity of the ibuprofen. Copyright © 2012 Elsevier B.V. All rights reserved.

Formulation and Evaluation of Ascorbic acid Tablets by Direct ...

African Journals Online (AJOL)

PURPOSE: To evaluate the tableting properties of microcrystalline starch (MCS) used as a direct compression excipient in the formulation of ascorbic acid tablets and to compare with the properties of tablets produced using microcrystalline cellulose (MCC). METHODS: MCS was obtained by partial hydrolysis of cassava ( ...

21 CFR 520.1660c - Oxytetracycline hydrochloride tablets/boluses.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride tablets/boluses. 520....1660c Oxytetracycline hydrochloride tablets/boluses. (a) Specifications. Each tablet or bolus contains 250, 500, or 1,000 milligrams of oxytetracycline hydrochloride. (b) Sponsors. For sponsors in § 510...

21 CFR 520.1510 - Nitenpyram tablets.

Science.gov (United States)

2010-04-01

... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... order of a licensed veterinarian. (d) Conditions of use—(1) Dogs—(i) Amount—(A) One 11.4-mg tablet for dogs weighing less than 25 pounds (lb) or one 57-mg tablet for dogs weighing more than 25 lb, as needed...

Astronomical Content in Rongorongo Tablet Keiti

DEFF Research Database (Denmark)

Wieczorek, Rafal

2011-01-01

Th e fi eld of rongorongo research: the study of Easter Island’s native script is in a peculiar state at the moment. While relative progress has been made in structural and statistical analysis in the last decades, at the level of both single glyphs as well as entire texts, little to no advanceme...... has been achieved in the actual decipherment. To shed new light on rongorongo research, a hypothesis regarding the contents of tablet Keiti, one of the 25 obtained artifacts, is proposed. Th e content, as well as the meaning, of all but one of these 25 rongorongo texts is still unknown....... In this publication, an interpretation for the recto side of tablet Keiti is presented. It is argued that the tablet contains astronomical observations or instructions regarding the Rapa Nui lunar calendar, and is similar in content to the only other rongorongo text whose function has been partially ascertained......: tablet Mamari. If the calendrical contents of this artifact were confi rmed, this would be a major boost to our understanding of Oceania’s only native script....

Polyols as filler-binders for disintegrating tablets prepared by direct compaction

NARCIS (Netherlands)

Bolhuis, Gerad K.; Rexwinkel, Erik G.; Zuurman, Klaas

Background: Although polyols are frequently used as tablet excipients in lozenges, chewing tablets, and orodisperse tablets, special directly compressible (DC) forms are recommended as filler-binder in common disintegrating tablets. Aim: In this article, DC types of isomalt, lactitol, mannitol,

Tablets, læring og nye forretningsmodeller

DEFF Research Database (Denmark)

Andersen, Pernille Viktoria Kathja

2011-01-01

D. 6 oktober satte Netværk om E-Læring (NoEL) i samarbejde med InVIO fokus på Tablet-computing igennem et heldagsarrangement i Aalborg Universitets nye omgivelser på Nyhavnsgade 14. Formålet med dagen var, at stille skarpt på tablet formatet og udforske potentialerne og udfordringerne med særligt...... vægt på iPads til mobillæring og nye forretningsmodeller. Tablet –computing er de seneste år blevet mere og mere udbredt indenfor både uddannelse, arbejdsliv og i fritiden. Ønsket for dagen var derfor at bidrage med diskussion og videndeling omkring, hvad den nye håndholdte touch teknologi kommer til...... at betyde for læring, samarbejde og forretningsmodeller og dermed hvilke nye vilkår tablet computing kan bidrage med indenfor arbejdsliv og uddannelse....

Cyclodextrins as excipients in tablet formulations.

Science.gov (United States)

Conceição, Jaime; Adeoye, Oluwatomide; Cabral-Marques, Helena Maria; Lobo, José Manuel Sousa

2018-04-22

This paper aims to provide a critical review of cyclodextrins as excipients in tablet formulations, highlighting: (i) the principal pharmaceutical applications of cyclodextrins; (ii) the most relevant technological aspects in pharmaceutical formulation development; and (iii) the actual regulatory status of cyclodextrins. Moreover, several illustrative examples are presented. Cyclodextrins can be used as complexing excipients in tablet formulations for low-dose drugs. By contrast, for medium-dose drugs and/or when the complexation efficiency is low, the methods to enhance the complexation efficiency play a key part in reducing the cyclodextrin quantity. In addition, these compounds are used as fillers, disintegrants, binders and multifunctional direct compression excipients of the tablets. Copyright © 2018 Elsevier Ltd. All rights reserved.

Damage-tolerance strategies for nacre tablets.

Science.gov (United States)

Wang, Shengnan; Zhu, Xinqiao; Li, Qiyang; Wang, Rizhi; Wang, Xiaoxiang

2016-05-01

Nacre, a natural armor, exhibits prominent penetration resistance against predatory attacks. Unraveling its hierarchical toughening mechanisms and damage-tolerance design strategies may provide significant inspiration for the pursuit of high-performance artificial armors. In this work, relationships between the structure and mechanical performance of nacre were investigated. The results show that other than their brick-and-mortar structure, individual nacre tablets significantly contribute to the damage localization of nacre. Affected by intracrystalline organics, the tablets exhibit a unique fracture behavior. The synergistic action of the nanoscale deformation mechanisms increases the energy dissipation efficiency of the tablets and contributes to the preservation of the structural and functional integrity of the shell. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of Corn Starch-Neusilin UFL2 Conjugate as Tablet Superdisintegrant: Formulation and Evaluation of Fast Disintegrating Tablets

Directory of Open Access Journals (Sweden)

Prateek Juneja

2014-01-01

Full Text Available In the present study, corn Starch-Neusilin UFL2 conjugates were prepared by physical, chemical, and microwave methods with the aim of using the conjugates as tablet superdisintegrant. Various powder tests, namely, angle of repose, bulk density, tapped density, Hausner’s ratio, Carr’s index, swelling index, and powder porosity were conducted on the samples. The conjugates were characterized by ATR-FTIR, XRD, DSC, and SEM techniques. Heckel and Kawakita models were applied to carry out compression studies for the prepared conjugates. Fast disintegrating tablets of domperidone were prepared using corn starch and corn Starch-Neusilin UFL2 conjugates as tablet superdisintegrants in different concentrations. Conjugates were found to possess good powder flow and tabletting properties. Heckel analysis indicated that the conjugates prepared by microwave method showed the slowest onset of plastic deformation while Kawakita analysis indicated that the conjugates prepared by microwave method exhibited the highest amount of total plastic deformation. The study revealed that the corn Starch-Neusilin UFL2 conjugates possess improved powder flow properties and could be a promising superdisintegrant for preparing fast disintegrating tablet. Also, the results sugessted that the microwave method was found to be most effective for the preparation of corn Starch-Neusilin UFL2 conjugates.

Development of fast disintegrating compressed tablets using amino acid as disintegration accelerator: evaluation of wetting and disintegration of tablet on the basis of surface free energy.

Science.gov (United States)

Fukami, Jinichi; Ozawa, Asuka; Yoshihashi, Yasuo; Yonemochi, Etsuo; Terada, Katsuhide

2005-12-01

A fast disintegrating compressed tablet was formulated using amino acids, such as L-lysine HCl, L-alanine, glycine and L-tyrosine as disintegration accelerator. The tablets having the hardness of about 4 kgf were prepared and the effect of amino acids on the wetting time and disintegration time in the oral cavity of tablets was examined on the basis of surface free energy of amino acids. The wetting time of the tablets increased in the order of L-lysine HCl, L-alanine, glycine and L-tyrosine, whereas the disintegration time in the oral cavity of the tablets increased in the order of L-alanine, glycine, L-lysine HCl and L-tyrosine. These behaviors were well analyzed by the introduction of surface free energy. When the polar component of amino acid was large value or the dispersion component was small value, faster wetting of tablet was observed. When the dispersion component of amino acid was large value or the dispersion component was small value, faster disintegration of tablet was observed, expect of L-tyrosine tablet. The fast disintegration of tablets was explained by the theory presented by Matsumaru.

Tensile and shear methods for measuring strength of bilayer tablets.

Science.gov (United States)

Chang, Shao-Yu; Li, Jian-Xin; Sun, Changquan Calvin

2017-05-15

Both shear and tensile measurement methods have been used to quantify interfacial bonding strength of bilayer tablets. The shear method is more convenient to perform, but reproducible strength data requires careful control of the placement of tablet and contact point for shear force application. Moreover, data obtained from the shear method depend on the orientation of the bilayer tablet. Although more time-consuming to perform, the tensile method yields data that are straightforward to interpret. Thus, the tensile method is preferred in fundamental bilayer tableting research to minimize ambiguity in data interpretation. Using both shear and tensile methods, we measured the mechanical strength of bilayer tablets made of several different layer combinations of lactose and microcrystalline cellulose. We observed a good correlation between strength obtained by the tensile method and carefully conducted shear method. This suggests that the shear method may be used for routine quality test of bilayer tablets during manufacturing because of its speed and convenience, provided a protocol for careful control of the placement of the tablet interface, tablet orientation, and blade is implemented. Copyright © 2017 Elsevier B.V. All rights reserved.

Profil Disolusi Terbanding Tablet Rifampisin Merek Dan Generik

OpenAIRE

Nurtanti, Mutiara Poetri; Kusuma, Anjar Mahardian; Siswanto, Agus

2010-01-01

Obat generik saat ini masih dipandang sebelah mata oleh masyarakat karena alasan kualitas dari obat generik lebih rendah dibandingkan obat merek. Tujuan penelitian ini untuk mengetahui perbandingan profil disolusi rifampisin tablet merek (A, B, C) dengan tablet rifampisin generik (D, E). Parameter penting dalam menentukan mutu obat dalam bentuk tablet adalah penetapan kekerasan, penetapan waktu hancur dan uji disolusi. Pengambilan sampel dilakukan berdasarkan produk yang beredar di pasaran ya...

Ginger Orally Disintegrating Tablets to Improve Swallowing in Older People.

Science.gov (United States)

Hirata, Ayumu; Funato, Hiroki; Nakai, Megumi; Iizuka, Michiro; Abe, Noriaki; Yagi, Yusuke; Shiraishi, Hisashi; Jobu, Kohei; Yokota, Junko; Hirose, Kahori; Hyodo, Masamitsu; Miyamura, Mitsuhiko

2016-01-01

We previously prepared and pharmaceutically evaluated ginger orally disintegrating (OD) tablets, optimized the base formulation, and carried out a clinical trial in healthy adults in their 20 s and 50s to measure their effect on salivary substance P (SP) level and improved swallowing function. In this study, we conducted clinical trials using the ginger OD tablets in older people to clinically evaluate the improvements in swallowing function resulting from the functional components of the tablet. The ginger OD tablets were prepared by mixing the excipients with the same amount of mannitol and sucrose to a concentration of 1% ginger. Eighteen healthy older adult volunteers aged 63 to 90 were included in the swallowing function test. Saliva was collected before and 15 min after administration of the placebo and ginger OD tablets. Swallowing endoscopy was performed by an otolaryngologist before administration and 15 min after administration of the ginger OD tablets. A scoring method was used to evaluate the endoscopic swallowing. Fifteen minutes after taking the ginger OD tablets, the salivary SP amount was significantly higher than prior to ingestion or after taking the placebo (pginger OD tablets. Our findings showed that the ginger OD tablets increased the salivary SP amount and improved swallowing function in older people with appreciably reduced swallowing function.

Portable Tablets in Science Museum Learning: Options and Obstacles

Science.gov (United States)

Gronemann, Sigurd Trolle

2017-01-01

Despite the increasing use of portable tablets in learning, their impact has received little attention in research. In five different projects, this media-ethnographic and design-based analysis of the use of portable tablets as a learning resource in science museums investigates how young people's learning with portable tablets matches the…

21 CFR 520.1696d - Penicillin V potassium tablets.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin V potassium tablets. 520.1696d Section... Penicillin V potassium tablets. (a) Specifications. Each tablet contains penicillin V potassium equivalent to 125 milligrams (200,000 units) or 250 milligrams (400,000 units) of penicillin V. (b) Sponsors. See...

The tabletting properties of Stearolac-S | Onyechi | Journal of ...

African Journals Online (AJOL)

press was used to determine the unit ejection force of tablets made from the direct compression formulations. The effects of the excipients on tablet hardness, friability, disintegration and dissolution rate were also evaluated. Tablets containing 3 - 4 % w/w STEAROLAC-S gave unit ejection force values comparable to those ...

Characterization of the Roman curse tablet

Science.gov (United States)

Liu, Wen; Zhang, Boyang; Fu, Lin

2017-08-01

The Roman curse tablet, produced in ancient Rome period, is a metal plate that inscribed with curses. In this research, several techniques were used to find out the physical structure and chemical composition of the Roman curse tablet, and testified the hypothesis that whether the tablet is made of pure lead or lead alloy. A sample of Roman Curse Tablet from the Johns Hopkins Archaeological Museum was analyzed using several different characterization techniques to determine the physical structure and chemical composition. The characterization techniques used were including optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). Because of the small sample size, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence (XRF) cannot test the sample. Results from optical microscopy and SEM, enlarged images of the sample surface were studied. The result revealed that the sample surface has a rough, non-uniform, and grainy surface. AFM provides three-dimensional topography of the sample surface, studying the sample surface in atomic level. DSC studies the thermal property, which is most likely a lead-alloy, not a pure lead. However, none of these tests indicated anything about the chemical composition. Future work will be required due to the lack of measures finding out its chemical composition. Therefore, from these characterization techniques above, the Roman curse tablet sample is consisted of lead alloy, not pure lead.

Placing wireless tablets in clinical settings for patient education.

Science.gov (United States)

Stribling, Judy C; Richardson, Joshua E

2016-04-01

The authors explored the feasibility and possible benefit of tablet-based educational materials for patients in clinic waiting areas. We distributed eight tablets preloaded with diagnosis-relevant information in two clinic waiting areas. Patients were surveyed about satisfaction, usability, and effects on learning. Technical issues were resolved. Thirty-seven of forty patients completed the survey. On average, the patients were satisfied in all categories. Placing tablet-based educational materials in clinic waiting areas is relatively easy to implement. Patients using tablets reported satisfaction across three domains: usability, education, and satisfaction.

Replacing Smartphones With Mini Tablet Technology: An Evaluation.

Science.gov (United States)

Maneval, Rhonda; Mechtel, Marci

Handheld technology allows students to access point-of-care resources throughout the clinical experience. To assess the viability of replacing student smartphones with tablets, an evaluation project was undertaken. Overall, students were equally dissatisfied with the 2 types of tablets that were evaluated. Students saw the potential usefulness of tablets to manage clinical assignments, interact with the learning management system, and communicate with faculty, but not for retrieving information currently accessible on their phones.

A fixed-dose combination tablet of gemigliptin and metformin sustained release has comparable pharmacodynamic, pharmacokinetic, and tolerability profiles to separate tablets in healthy subjects.

Science.gov (United States)

Park, Sang-In; Lee, Howard; Oh, Jaeseong; Lim, Kyoung Soo; Jang, In-Jin; Kim, Jeong-Ae; Jung, Jong Hyuk; Yu, Kyung-Sang

2015-01-01

In type 2 diabetes mellitus, fixed-dose combination (FDC) can provide the complementary benefits of correction of multiple pathophysiologic defects such as dysfunctions in glycemic or metabolic control while improving compliance compared with separate tablets taken together. The objective of the study reported here was to compare the pharmacodynamic (PD), pharmacokinetic (PK), and tolerability profiles of gemigliptin and extended-release metformin (metformin XR) between FDC and separate tablets. A randomized, open-label, single-dose, two-way, two-period, crossover study was conducted in 28 healthy male volunteers. Two FDC tablets of gemigliptin/metformin 25/500 mg or separate tablets of gemigliptin (50 mg ×1) and metformin XR (500 mg ×2) were orally administered in each period. Serial blood samples were collected up to 48 hours post-dose to determine dipeptidyl peptidase 4 (DPP-4) activity using spectrophotometric assay and concentrations of gemigliptin and metformin using tandem mass spectrometry. Geometric mean ratios (GMRs) of FDC to separate tablet formulations and their 90% confidence intervals (CIs) were calculated to compare the PD and PK parameters between the two formulations. Tolerability was assessed throughout the study. The plasma DPP-4 activity-time curves of the FDC and the separate tablets almost overlapped, leading to a GMR (90% CI) of the FDC to separate tablets for the plasma DPP-4 activity and its maximum inhibition of 1.00 (0.97-1.04) and 0.92 (0.82-1.05), respectively. Likewise, all of the GMRs (90% CIs) of FDC to separate tablets for the area under the plasma concentration-time curve and maximum plasma concentration of gemigliptin and metformin fell entirely within the conventional bioequivalence range of 0.80-1.25. Both the FDC and separate tablets were well tolerated. The PD, PK, and tolerability profiles of gemigliptin and metformin XR in FDC and separate tablets were found to be comparable. The FDC tablet of gemigliptin and metformin

Tablet Computer Literacy Levels of the Physical Education and Sports Department Students

Directory of Open Access Journals (Sweden)

Gulten HERGUNER

2016-04-01

Full Text Available Education systems are being affected in parallel by newly emerging hardware and new developments    occurring in technology daily. Tablet usage especially is becoming ubiquitous in the teaching‐learning processes in recent years. Therefore, using the tablets effectively, managing them and having a high level of tablet literacy play an important role within the education system. This study aimed at determining the tablet literacy levels of students in the Physical Education and Sports Teaching department at Sakarya University in Turkey, and examining this data with regard to various variables. Some 276 students participated in the study. Findings of the study suggest that the sample has a high tablet literacy level. While no significant difference was found in the tablet literacy  by gender, the students in the 2nd grade are noted to have higher levels of tablet literacy compared to the students in 3rd and 4th grades and tablet owners are more tablet literate when compared to non‐owners. A significant but low level correlation was found between the tablet usage time and tablet literacy.  

Transforming the Classroom With Tablet Technology.

Science.gov (United States)

Sargent, Lana; Miles, Elizabeth

Identifying the most effective models for integrating new technology into the classroom and understanding its effects on educational outcomes are essential for nurse educators. This article describes an educational intervention with tablet technology (iPads) using an innovative case-based learning model in a nursing program. Students reported positive learning outcomes when using the tablet technology for learning course content.

Chewability testing in the development of a chewable tablet for hyperphosphatemia.

Science.gov (United States)

Lanz, Michael; Baldischweiler, Jan; Kriwet, Burkhard; Schill, Jutta; Stafford, John; Imanidis, Georgios

2014-12-01

The official Pharmacopeia does not include a test procedure for the in vitro estimation of the chewability of tablets and publications in the scientific literature on this subject are rare. The purpose of this study was to evaluate a number of different test procedures for assessing chewability, starting from standard breaking force and strength testing and progressing to develop new procedures that simulate the actual chewing action on tablets. A further goal was to apply these test procedures to characterize the chewability of the novel phosphate binder PA21 in comparison with a commercially available phosphate binder chewable tablet product based on lanthanum (Fosrenol®) and a chewable tablet product containing calcium (Calcimagon®) - the latter being used as a standard for its very good chewability. For this purpose, a number of development formulations (different batches of PA21) were tested. The radial or diametrical tablet breaking force offers a poor means of assessing chewability while the axial breaking force was concluded to better reflect the effect of chewing on the tablet. Measurement of tablet behavior upon repeated loading afforded the best simulation of the actual chewing action and was found to have a good discriminating power with respect to chewability of the tested tablets, especially when the tablet was moistened with artificial saliva. The developed tests are shown to be more suitable for evaluating chewing properties of tablets than currently used Pharmacopeial tests. Following ICHQ6, which calls for specification of hardness for chewable tablets, these test procedures enabled the optimal chewability features of PA21 tablets in development to be confirmed whilst still maintaining capabilities for robust production and transportation processes.

Fire behavior of e-tablets stored in aircraft galley carts.

Science.gov (United States)

2015-04-01

The use of electronic-tablets (e-tablets) as replacements for conventional in-flight entertainment systems has gained popularity : among airlines globally. Innovative methods of storing and charging e-tablets in galley carts have been suggested or ar...

Tablet potency of Tianeptine in coated tablets by near infrared spectroscopy: model optimisation, calibration transfer and confidence intervals.

Science.gov (United States)

Boiret, Mathieu; Meunier, Loïc; Ginot, Yves-Michel

2011-02-20

A near infrared (NIR) method was developed for determination of tablet potency of active pharmaceutical ingredient (API) in a complex coated tablet matrix. The calibration set contained samples from laboratory and production scale batches. The reference values were obtained by high performance liquid chromatography (HPLC) and partial least squares (PLS) regression was used to establish a model. The model was challenged by calculating tablet potency of two external test sets. Root mean square errors of prediction were respectively equal to 2.0% and 2.7%. To use this model with a second spectrometer from the production field, a calibration transfer method called piecewise direct standardisation (PDS) was used. After the transfer, the root mean square error of prediction of the first test set was 2.4% compared to 4.0% without transferring the spectra. A statistical technique using bootstrap of PLS residuals was used to estimate confidence intervals of tablet potency calculations. This method requires an optimised PLS model, selection of the bootstrap number and determination of the risk. In the case of a chemical analysis, the tablet potency value will be included within the confidence interval calculated by the bootstrap method. An easy to use graphical interface was developed to easily determine if the predictions, surrounded by minimum and maximum values, are within the specifications defined by the regulatory organisation. Copyright © 2010 Elsevier B.V. All rights reserved.

Quality-by-design approach for the development of telmisartan potassium tablets.

Science.gov (United States)

Oh, Ga-Hui; Park, Jin-Hyun; Shin, Hye-Won; Kim, Joo-Eun; Park, Young-Joon

2018-05-01

A quality-by-design approach was adopted to develop telmisartan potassium (TP) tablets, which were bioequivalent with the commercially available Micardis ® (telmisartan free base) tablets. The dissolution pattern and impurity profile of TP tablets differed from those of Micardis ® tablets because telmisartan free base is poorly soluble in water. After identifying the quality target product profile and critical quality attributes (CQAs), drug dissolution, and impurities were predicted to be risky CQAs. To determine the exact range and cause of risks, we used the risk assessment (RA) tools, preliminary hazard analysis and failure mode and effect analysis to determine the parameters affecting drug dissolution, impurities, and formulation. The range of the design space was optimized using the face-centered central composite design among the design of experiment (DOE) methods. The binder, disintegrant, and kneading time in the wet granulation were identified as X values affecting Y values (disintegration, hardness, friability, dissolution, and impurities). After determining the design space with the desired Y values, the TP tablets were formulated and their dissolution pattern was compared with that of the reference tablet. The selected TP tablet formulated using design space showed a similar dissolution to that of Micardis ® tablets at pH 7.5. The QbD approach TP tablet was bioequivalent to Micardis ® tablets in beagle dogs.

Evaluation of powder and tableting properties of chitosan

OpenAIRE

Picker-Freyer, Katharina M.; Brink, Diana

2006-01-01

The aim of this study was to analyze the process of tablet formation and the properties of the resulting tablets for 3 N-deacetylated chitosans, with a degree of deacetylation of 80%, 85%, or 90%. Material properties, such as water content, particle size and morphology, glass transition temperature, and molecular weight were studied. The process of tablet formation was analyzed by 3-D modeling, Heckel analysis, the pressure time function, and energy calculations in combination with elastic re...

Study of the variables which influence the impregnation of globules, compressed tablets and tablet triturates used in homeopathy

Directory of Open Access Journals (Sweden)

Fernanda Santos de Souza

2012-09-01

Full Text Available Globules, compressed tablets and tablet triturates are solid dosage forms used in homeopathy. Divergences can be noted between the preparation techniques described in official compendiums as well as those applied in homeopathic pharmacies. The difficulty associated with standardization of the impregnation of these dosage forms occurs due to the lack of detail provided for the techniques in the literature, leaving it up to each pharmacy to decide on the exact method of preparation. The objective was to optimize the impregnation technique, through investigating the variables that influence the impregnation of globules, compressed tablets and tablet triturates, applying the statistical tool of factorial design. The independent variables were the dosage form, percentage and type of impregnation and drying temperature, and the dependent variables were the mass gain, disintegration time, friability and hardness. For the globules, the greatest mass gain was for 10% impregnation and drying at 20 ºC. For the tablet triturates and compressed tablets the greatest mass gain was for 15% impregnation and there was no difference between the results obtained using simple and triple impregnation or different drying temperatures. The results can contribute to improving the final product quality, besides aiding in the establishment of standardized techniques for the official compendiums.Glóbulos, comprimidos e tabletes são formas farmacêuticas sólidas utilizadas em homeopatia. Constatam-se divergências entre técnicas de preparação descritas nos compêndios oficiais, bem como em farmácias homeopáticas. A dificuldade de padronização na impregnação destas formas farmacêuticas também ocorre devido à falta de detalhamento das técnicas na literatura existente, deixando para cada farmácia a escolha de como executá-las. O objetivo foi otimizar a técnica de impregnação, através do estudo de variáveis que interferem na impregnação de gl

Influence of water-soluble channeling agents on the release of diclofenac sodium from Irvingia malayana wax matrix tablets.

Science.gov (United States)

Yotsawimonwat, Songwut; Charumanee, Suporn; Kaewvichit, Sayam; Sirithunyalug, Jakkapan; Sirisa-Ard, Panee; Piyamongkol, Sirivipa; Siangwong, Kulthawat

2017-05-01

Irvingia malayana wax (IW) is majorly composed of esters of medium chain fatty acids. Its melting point is low and closed to the body temperature. This study aimed at investigating the potential of IW as a matrix-forming agent and evaluate the effect of soluble channeling agents on the release of diclofenac sodium (DS) from IW matrix tablets. The preformulation study by infrared spectroscopy and differential scanning calorimetry showed no incompatibility between IW and DS or soluble channeling agents, namely PEG 4000, PEG 6000 and lactose. IW retarded the release of DS from the matrix tablets more efficiently than carnauba wax due to its greater hydrophobicity and its ability to become partial molten wax at 37° C. Factors affecting the release of DS from IW matrix were drug concentrations, and types and concentrations of channeling agents. The release of DS significantly improved when DS concentration reached approximately 33%. The fast dissolving channeling agent, lactose, could enhance the drug release rate more effectively than PEG 4000 and PEG 6000, respectively. The linear relationship between the DS release rate and the concentration of the chosen channeling agent, PEG 6000, was found (r 2 =0.9866).

Quantitative Determination of Metformin Hydrochloride in Tablet ...

African Journals Online (AJOL)

Purpose: To develop and validate a suitable method for the assay of metformin hydrochloride (HCl) in tablets containing croscarmellose sodium as an additive. Methods: Methanol and ethanol (99%) were assessed as solvents for sample preparation for the assay of metformin HCl in tablets containing croscarmellose ...

Placing wireless tablets in clinical settings for patient education

Directory of Open Access Journals (Sweden)

Judy C. Stribling, MA, MLS

2016-11-01

Full Text Available Objective: The authors explored the feasibility and possible benefit of tablet-based educational materials for patients in clinic waiting areas. Methods: We distributed eight tablets preloaded with diagnosis-relevant information in two clinic waiting areas. Patients were surveyed about satisfaction, usability, and effects on learning. Technical issues were resolved. Results: Thirty-seven of forty patients completed the survey. On average, the patients were satisfied in all categories. Conclusions: Placing tablet-based educational materials in clinic waiting areas is relatively easy to implement. Patients using tablets reported satisfaction across three domains: usability, education, and satisfaction.

[Effect of food thickener on disintegration and dissolution of magnesium oxide tablets].

Science.gov (United States)

Tomita, Takashi; Goto, Hidekazu; Yoshimura, Yuya; Tsubouchi, Yoshiko; Nakanishi, Rie; Kojima, Chikako; Yoneshima, Mihoko; Yoshida, Tadashi; Tanaka, Katsuya; Sumiya, Kenji; Kohda, Yukinao

2015-01-01

It has been reported that magnesium oxide tablets are excreted in a non-disintegrated state in the stool of patients when the tablets are administered after being immersed in a food thickener. Therefore we examined whether immersion in a food thickener affects the pharmacological effect in patients taking magnesium oxide tablets, and whether immersion affects its disintegration and solubility. The mean dosage (1705 mg/d) was higher for patients who took tablets after immersion in a food thickener than for those who took non-immersed tablets (1380 mg/d). The disintegration time and dissolution rate of the immersed tablets were lower than those of non-immersed tablets in vitro. Furthermore, components that constitute the food thickener and differences in composition concentrations differentially affect the disintegration and solubility of magnesium oxide tablets. This suggests that commercially available food thickeners are likely to be associated with changes in the degradation of magnesium oxide tablets, and they therefore should be carefully used in certain clinical situations.

Interaction With PC Tablets And Possible Emotional Responses

Directory of Open Access Journals (Sweden)

Emy Agren

2015-08-01

Full Text Available The remarkable developments in mobile-based technologies have brought prominent impacts on human life style. Today life is running on mobile electronic devices smart phones tablets gaming devices and video-players. Generally the users acquaint with the features and properties of products after emotionally and physically interacting with the devices. The interaction in return influencing our moods depending on the feelings the technology creates. The focus of this study lays on the uses of tablets or also called PC tablets and its effects on its users emotional responses. To discover possible emotional responses with the tablets the data in this work were collected through a survey questionnaire from participants belongs to various backgrounds age groups and genders. The model of emotions was adopted in order to classify the emotional responses.The study has found that during or after the interaction with the tablets the users may get positive or negative emotional responses of a different kind. The users mood can also be affected by awakening such emotional feelings as happiness sadness frustration etc.

Graphics tablet technology in second year thermal engineering teaching

Directory of Open Access Journals (Sweden)

Antonio Carrillo Andrés

2013-12-01

Full Text Available Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but they have not yet found widespread acceptance for university teaching. A graphics tablet is an affordable and efficient teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a traditional blackboard does. However, the tablet is more versatile, being able to integrate graphic material such as tables, graphs, colours, etc. In addition to that, lecture notes can be saved and posted on a course website. The objective of this paper is to show the usefulness of tablet technology in undergraduate engineering teaching by sharing experiences made using a graphics tablet for lecturing a second year Thermal Engineering course. Students’ feedback is definitely positive, though there are some caveats regarding technical and operative problems.

Monitoring tablet surface roughness during the film coating process

DEFF Research Database (Denmark)

Seitavuopio, Paulus; Heinämäki, Jyrki; Rantanen, Jukka

2006-01-01

The purpose of this study was to evaluate the change of surface roughness and the development of the film during the film coating process using laser profilometer roughness measurements, SEM imaging, and energy dispersive X-ray (EDX) analysis. Surface roughness and texture changes developing during...... the process of film coating tablets were studied by noncontact laser profilometry and scanning electron microscopy (SEM). An EDX analysis was used to monitor the magnesium stearate and titanium dioxide of the tablets. The tablet cores were film coated with aqueous hydroxypropyl methylcellulose, and the film...... coating was performed using an instrumented pilot-scale side-vented drum coater. The SEM images of the film-coated tablets showed that within the first 30 minutes, the surface of the tablet cores was completely covered with a thin film. The magnesium signal that was monitored by SEM-EDX disappeared after...

Developing a mapping tool for tablets

Science.gov (United States)

Vaughan, Alan; Collins, Nathan; Krus, Mike

2014-05-01

Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

Influence of food on pharmacokinetics of zolpidem from fast dissolving sublingual zolpidem tartrate tablets.

Science.gov (United States)

Greenblatt, David J; Harmatz, Jerold S; Singh, Nikhilesh N; Roth, Thomas; Harris, Stephen C; Kapil, Ram P

2013-11-01

Ingesting food can impact the pharmacokinetics of sedative-hypnotic drugs. A buffered zolpidem sublingual tablet (ZST) recently became available for the treatment of middle-of-the-night awakening. In this randomized, open-label, single-site study, the pharmacokinetic profile of ZST was evaluated when administered while fasting and following a standard high-fat meal (fed state). Healthy adults aged 18-64 years received a single morning dose of 3.5 mg ZST in the fed or fasting state. From 20 min to 3 h post-dose, zolpidem plasma levels were lower in the fed state compared to the fasting state. After 4 h post-dose (corresponding to "morning wake time"), higher zolpidem plasma levels were evident in the fed state. Area under the concentration-time curve (AUC) values for the 0-8 h interval were 160 ng/mL h in the fed state and 203 ng/mL h in the fasting state (P fasting states, Cmax was 32.0 ng/mL versus 57.3 ng/mL (P < .001), respectively, and Tmax was 3.0 h versus 0.92 h (P < .001), respectively. Together these data suggest that administration of ZST in the fed state is not optimal for maximizing the likelihood of therapeutic benefit and minimizing the probability of residual sedation. © 2013, The American College of Clinical Pharmacology.

21 CFR 520.2362 - Thenium closylate tablets.

Science.gov (United States)

2010-04-01

....2362 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...) Conditions of use. (1) The tablets are administered orally to dogs as a single day treatment of canine... Uncinaria stenocephala (hookworms). Dogs weighing 10 pounds and over are administered 1 tablet as a single...

Active Reading Behaviors in Tablet-Based Learning

Science.gov (United States)

Palilonis, Jennifer; Bolchini, Davide

2015-01-01

Active reading is fundamental to learning. However, there is little understanding about whether traditional active reading frameworks sufficiently characterize how learners study multimedia tablet textbooks. This paper explores the nature of active reading in the tablet environment through a qualitative study that engaged 30 students in an active…

Mechanism by Which Magnesium Oxide Suppresses Tablet Hardness Reduction during Storage.

Science.gov (United States)

Sakamoto, Takatoshi; Kachi, Shigeto; Nakamura, Shohei; Miki, Shinsuke; Kitajima, Hideaki; Yuasa, Hiroshi

2016-01-01

This study investigated how the inclusion of magnesium oxide (MgO) maintained tablet hardness during storage in an unpackaged state. Tablets were prepared with a range of MgO levels and stored at 40°C with 75% relative humidity for up to 14 d. The hardness of tablets prepared without MgO decreased over time. The amount of added MgO was positively associated with tablet hardness and mass from an early stage during storage. Investigation of the water sorption properties of the tablet components showed that carmellose water sorption correlated positively with the relative humidity, while MgO absorbed and retained moisture, even when the relative humidity was reduced. In tablets prepared using only MgO, a petal- or plate-like material was observed during storage. Fourier transform infrared spectrophotometry showed that this material was hydromagnesite, produced when MgO reacts with water and CO2. The estimated level of hydromagnesite at each time-point showed a significant negative correlation with tablet porosity. These results suggested that MgO suppressed storage-associated softening by absorbing moisture from the environment. The conversion of MgO to hydromagnesite results in solid bridge formation between the powder particles comprising the tablets, suppressing the storage-related increase in volume and increasing tablet hardness.

A classification system for tableting behaviors of binary powder mixtures

Directory of Open Access Journals (Sweden)

Changquan Calvin Sun

2016-08-01

Full Text Available The ability to predict tableting properties of a powder mixture from individual components is of both fundamental and practical importance to the efficient formulation development of tablet products. A common tableting classification system (TCS of binary powder mixtures facilitates the systematic development of new knowledge in this direction. Based on the dependence of tablet tensile strength on weight fraction in a binary mixture, three main types of tableting behavior are identified. Each type is further divided to arrive at a total of 15 sub-classes. The proposed classification system lays a framework for a better understanding of powder interactions during compaction. Potential applications and limitations of this classification system are discussed.

Absorption from iron tablets given with different types of meals

International Nuclear Information System (INIS)

Hallberg, L.; Bjoern-Rasmussen, E.; Ekenved, G.; Garby, L.; Rossander, L.; Pleehachinda, R.; Suwanik, R.; Arvidsson, B.

1978-01-01

The absorption from iron tablets given with 5 types of meals was studied in 153 subjects. The meals were: a hamburger meal with beans and potatoes, a simple breakfast meal, a Latin American meal composed of black beans, rice and maize and two Southeast Asian meals composed of rice, vegetables, and spices served with and without fish. The groups were directly compared by relating the absorption from the iron tablets to the absorption from a standardized reference dose of iron given on an empty stomach. The composition of meals with respect to content of meat or fish or the presence of large amounts of phytates seemed to have no influence on the absorption of iron from tablets. The absorption from iron tablets was about 40% higher when they were given with rice meals than when they were given with the other meals studied. The average decrease in absorption by meals was about 50-60% based on a comparison when tablets were given on an empty stomach. When tablets from which the iron was released more slowly were used, the absorption increased by about 30% except when they were given with rice meals, where the absorption was unchanged. The differences among the meals in their effect on the absorption of iron from tablets thus disappeared when the slow-release tablets were given. (author)

Absorption from iron tablets given with different types of meals

Energy Technology Data Exchange (ETDEWEB)

Hallberg, L; Bjoern-Rasmussen, E; Ekenved, G; Garby, L; Rossander, L; Pleehachinda, R; Suwanik, R; Arvidsson, B

1978-01-01

The absorption from iron tablets given with 5 types of meals was studied in 153 subjects. The meals were: a hamburger meal with beans and potatoes, a simple breakfast meal, a Latin American meal composed of black beans, rice and maize and two Southeast Asian meals composed of rice, vegetables, and spices served with and without fish. The groups were directly compared by relating the absorption from the iron tablets to the absorption from a standardized reference dose of iron given on an empty stomach. The composition of meals with respect to content of meat or fish or the presence of large amounts of phytates seemed to have no influence on the absorption of iron from tablets. The absorption from iron tablets was about 40% higher when they were given with rice meals than when they were given with the other meals studied. The average decrease in absorption by meals was about 50-60% based on a comparison when tablets were given on an empty stomach. When tablets from which the iron was released more slowly were used, the absorption increased by about 30% except when they were given with rice meals, where the absorption was unchanged. The differences among the meals in their effect on the absorption of iron from tablets thus disappeared when the slow-release tablets were given.

Absorption from iron tablets given with different types of meals.

Science.gov (United States)

Hallberg, L; Björn-Rasmussen, E; Ekenved, G; Garby, L; Rossander, L; Pleehachinda, R; Suwanik, R; Arvidsson, B

1978-09-01

The absorption of iron from tablets given with 5 types of meals was studied in 153 subjects. The meals were: a hamburger meal with beans and potatoes, a simple breakfast meal, a Latin American meal composed of black beans, rice and maize and two Southeast Asian meals composed of rice, vegetables and spices served with and without fish. The groups were directly compared by relating the absorption from the iron tablets to the absorption from a standardized reference dose of iron given on an empty stomach. The composition of meals with respect to content of meat or fish or the presence of large amounts of phytates seemed to have no influence on the absorption of iron from tablets. The absorption from iron tablets was about 40% higher when they were given with rice meals than when they were given with the other meals studied. The average decrease in absorption by meals was about 50-60% based on a comparison when tablets were given on an empty stomach. When tablets from which the iron was released more slowly were used, the absorption increased by about 30% except when they were given with rice meals, where the absorption was unchanged. The differences among the meals in their effect on the absorption of iron from tablets thus disappeared when the slow-release tablets were given.

Preparation and scale up of extended-release tablets of bromopride

Directory of Open Access Journals (Sweden)

Guilherme Neves Ferreira

2014-04-01

Full Text Available Reproducibility of the tablet manufacturing process and control of its pharmaceutics properties depends on the optimization of formulation aspects and process parameters. Computer simulation such as Design of Experiments (DOE can be used to scale up the production of this formulation, in particular for obtaining sustained-release tablets. Bromopride formulations are marketed in the form of extended-release pellets, which makes the product more expensive and difficult to manufacture. The aim of this study was to formulate new bromopride sustained release formulations as tablets, and to develop mathematical models to standardize the scale up of this formulation, controlling weight and hardness of the tablets during manufacture according to the USP 34th edition. DOE studies were conducted using Minitab(tm software. Different excipient combinations were evaluated in order to produce bromopride sustained-release matrix tablets. In the scale-up study, data were collected and variations in tableting machine parameters were measured. Data were processed by Minitab(tm software, generating mathematical equations used for prediction of powder compaction behavior, according to the settings of the tableting machine suitable for scale-up purposes. Bromopride matrix tablets with appropriate characteristics for sustained release were developed. The scale-up of the formulation with the most suitable sustained release profile was established by using mathematical models, indicating that the formulation can be a substitute for the pellets currently marketed.

Formulation of Dihydroartemisinin-Piperaquine (DHP Generic Tablet as Antimalarials Drug

Directory of Open Access Journals (Sweden)

Nanang Yunarto

2016-09-01

Full Text Available The incidence of malaria in Indonesia is about two million cases annually. Dihydroartemisinin-piperaquine (DHP is the first line therapy recommended for uncomplicated malaria treatment, whereas  DHP is still fully imported. The generic DHP tablet formulation has the potential to become the first of DHP drug which is locally produced. This study is aimed to formulate generic DHP film coated tablets for antimalaria drug. Tablets were compressed with the combination of wet granulation for piperaquine phosphate (PQP and direct compression method for DHA and coated with a moisture barier coating material. The parameters to evaluate the quality of DHP tablets are physical properties, assay, and dissolution test. DHA and PQP assay were performed by HPLC method. The dissolution testing was conducted by in house method using HCl 0.1 N medium. The result shows physical properties of film-coated tablets meet the requirement, i.e. uniform weight, 7.0-8.5 kp hardness, 0.02% friability and 3 minute 22 seconds disintegration. The assay to determine  DHA in tablet was 95.17% and PQP was 97.05%. The result of dissolution testing shows the content of DHA and PQP in the tablet were 113.51% and 96.55%, respesctively. The formulation which is developed meets the general requirement of API in tablet 90–110% and dissolution requirement >75%.

Ultrasound transmission measurements for tensile strength evaluation of tablets.

Science.gov (United States)

Simonaho, Simo-Pekka; Takala, T Aleksi; Kuosmanen, Marko; Ketolainen, Jarkko

2011-05-16

Ultrasound transmission measurements were performed to evaluate the tensile strength of tablets. Tablets consisting of one ingredient were compressed from dibasic calcium phosphate dehydrate, two grades of microcrystalline cellulose and two grades of lactose monohydrate powders. From each powder, tablets with five different tensile strengths were directly compressed. Ultrasound transmission measurements were conducted on every tablet at frequencies of 2.25 MHz, 5 MHz and 10 MHz and the speed of sound was calculated from the acquired waveforms. The tensile strength of the tablets was determined using a diametrical mechanical testing machine and compared to the calculated speed of sound values. It was found that the speed of sound increased with the tensile strength for the tested excipients. There was a good correlation between the speed of sound and tensile strength. Moreover, based on the statistical tests, the groups with different tensile strengths can be differentiated from each other by measuring the speed of sound. Thus, the ultrasound transmission measurement technique is a potentially useful method for non-destructive and fast evaluation of the tensile strength of tablets. Copyright © 2011 Elsevier B.V. All rights reserved.

Actual and Potential Pedagogical Use of Tablets in Schools

Directory of Open Access Journals (Sweden)

Jenni Rikala

2013-01-01

Full Text Available This study reviews the potential of tablet technology for teaching and learning. In autumn 2012, we conducted a focused survey comprising quantitative and qualitative questions with Finnish teachers (N = 171, from 54 schools. We focused on perceived pedagogical opportunities and the actualized pedagogical potential of tablets at schools. The survey results indicate that the actual usefulness of tablets in schools was significantly less than what teachers perceived as the pedagogical potential. However, the results demonstrate the positive impact these devices are having on teaching and learning, as well as prompting changes in pedagogical perspectives. Teachers stated that tablets can diversify and enhance teaching and learning in many ways, particularly in supporting learners’ motivation and independent learning, and promoting engaging teaching methods. Nevertheless, teachers voiced concern that the student-to-device ratio at the moment is too low, thus serving as a barrier to widespread use of tablets.

[Formulation optimization of panax notoginsenoside orally fast disintegration tablets].

Science.gov (United States)

Wang, Zhi; Wei, Li; Chen, Ting

2008-07-01

To optimize the formulation of panax notoginsenoside orally fast disintegrating tablets. Mannitol, microcrystalline cellulose (PH 102) and lactose 80 were used as diluent. A polynomial regression algorithm was used to evaluate the relationship between the controlling factor, compacting pressure and diluent ratio, and disintegration time, tensile strength of tablets. Optimum formulation and process parameters could be determined by contrast the contour plot of tensile strength to that of disintegration time. The disintegration time and tensile strength of panax notoginsenoside oral disintegrating tablets were good, and the taste was satisfactory. Panax notoginsenoside oral disintegrating tablets achieve the goal of design and this method can be fairly used in formulation screening.

Characterising the disintegration properties of tablets in opaque media using texture analysis.

Science.gov (United States)

Scheuerle, Rebekah L; Gerrard, Stephen E; Kendall, Richard A; Tuleu, Catherine; Slater, Nigel K H; Mahbubani, Krishnaa T

2015-01-01

Tablet disintegration characterisation is used in pharmaceutical research, development, and quality control. Standard methods used to characterise tablet disintegration are often dependent on visual observation in measurement of disintegration times. This presents a challenge for disintegration studies of tablets in opaque, physiologically relevant media that could be useful for tablet formulation optimisation. This study has explored an application of texture analysis disintegration testing, a non-visual, quantitative means of determining tablet disintegration end point, by analysing the disintegration behaviour of two tablet formulations in opaque media. In this study, the disintegration behaviour of one tablet formulation manufactured in-house, and Sybedia Flashtab placebo tablets in water, bovine, and human milk were characterised. A novel method is presented to characterise the disintegration process and to quantify the disintegration end points of the tablets in various media using load data generated by a texture analyser probe. The disintegration times in the different media were found to be statistically different (Pdisintegration times from each other in human versus bovine milk (adjusted P value 0.1685). Copyright © 2015 Elsevier B.V. All rights reserved.

Preventive distribution and plans of iodine tablets stocks management

International Nuclear Information System (INIS)

2002-01-01

This official note includes two parts: one concerns the new preventive distribution of iodine tablets on the areas defined by the Particular Intervention Plans (P.P.I.) around nuclear facilities and the other one the setting up of iodine tablets stocks beyond the P.P.I. areas. In annexe is a guide for the elaboration of stocks management plans for steady iodine tablets. (N.C.)

Bioavailability of everolimus administered as a single 5 mg tablet versus five 1 mg tablets: a randomized, open-label, two-way crossover study of healthy volunteers.

Science.gov (United States)

Thudium, Karen; Gallo, Jorge; Bouillaud, Emmanuel; Sachs, Carolin; Eddy, Simantini; Cheung, Wing

2015-01-01

The mammalian target of rapamycin (mTOR) inhibitor everolimus has a well-established pharmacokinetics profile. We conducted a randomized, single-center, open-label, two-sequence, two-period crossover study of healthy volunteers to assess the relative bioavailability of everolimus administered as one 5 mg tablet or five 1 mg tablets. Subjects were randomized 1:1 to receive everolimus dosed as one 5 mg tablet or as five 1 mg tablets on day 1, followed by a washout period on days 8-14 and then the opposite formulation on day 15. Blood sampling for pharmacokinetic evaluation was performed at prespecified time points, with 17 samples taken for each treatment period. Primary variables for evaluation of relative bioavailability were area under the concentration-time curve from time zero to infinity (AUCinf) and maximum blood concentration (Cmax). Safety was assessed by reporting the incidence of adverse events (AEs). Twenty-two participants received everolimus as one 5 mg tablet followed by five 1 mg tablets (n=11) or the opposite sequence (n=11). The Cmax of five 1 mg tablets was 48% higher than that of one 5 mg tablet (geometric mean ratio, 1.48; 90% confidence interval [CI], 1.35-1.62). AUCinf was similar (geometric mean ratio, 1.08; 90% CI, 1.02-1.16), as were the extent of absorption and the distribution and elimination kinetics. AEs, all grade 1 or 2, were observed in 54.5% of subjects. Although the extent of absorption was similar, the Cmax of five 1 mg tablets was higher than that of one 5 mg tablet, suggesting these formulations lead to different peak blood concentrations and are not interchangeable at the dose tested.

Quality of Artesunate Tablets Sold in Pharmacies in Kumasi, Ghana ...

African Journals Online (AJOL)

Purpose: The study was carried out to evaluate the quality of artesunate tablets sold in retail and wholesale pharmacies in Kumasi, Ghana. In particular, the study sought to ascertain the presence or otherwise of counterfeit artesunate tablets in Kumasi. Method: Artesunate tablets were purchased from pharmacies in Kumasi ...

Variability in the 3,4-methylenedioxymethamphetamine content of 'ecstasy' tablets in the UK.

Science.gov (United States)

Wood, David Michael; Stribley, Vasoulla; Dargan, Paul Ivor; Davies, Susannah; Holt, David W; Ramsey, John

2011-09-01

Toxicity, such as hyperpyrexia, associated with the use of 3,4-methylenedioxymethamphetamine (MDMA; 'ecstasy') appears to be related to serum MDMA concentrations. However, there does not appear to be a similar association with the number of tablets ingested, suggesting variation in the tablet content of MDMA. Although work has shown this variation in other areas of the world, no studies have reported on the variation of MDMA content in UK ecstasy tablets. Ecstasy tablets seized from individuals attending nightclubs were analysed qualitatively to determine if they contained MDMA and quantitatively to determine the MDMA content per tablet. The mean amount of MDMA hydrochloride in 101 seized ecstasy tablets was 58.7±22.9 mg per tablet, with a range of 20 mg to 131 mg per tablet. The majority (96.0%) of tablets contained less than 100 mg MDMA per tablet. There appeared to be a bimodal distribution of MDMA content at approximately 20-40 mg per tablet and 60-80 mg per tablet. There is variability in the MDMA content of ecstasy tablets in the UK. This variability could potentially put users at increased risk of acute harm due to inadvertent excess ingestion of MDMA, as they are unaware of the differences in the MDMA content. Repeat sampling and quantification of MDMA content of ecstasy tablets in the UK will allow better education of users about the potential harms associated with the variability in the MDMA content. In addition, it will provide information to allow the monitoring of changes in not only the MDMA content, but also other adulterants, in ecstasy tablets.

Exploration of the associations of touch-screen tablet computer usage and musculoskeletal discomfort.

Science.gov (United States)

Chiang, Hsin-Yu Ariel; Liu, Chien-Hsiou

2016-03-10

Tablet users may be at high risk of developing physical discomfort because of their usage behaviors and tablet design. Investigate the usage of tablets, variations in head and neck posture associated with different tablet tilt angles, and the association of tablet use with users' musculoskeletal discomfort. A survey of users' subjective perceptions conducted by questionnaire and measurements of users' postures by a 3D Motion analysis system was used to explore the effects of tablet use. The questionnaire results indicated that over half of the participants reported physical discomfort after using tablets, with the most prevalent discomfort in the neck and shoulders, and more intensity of discomfort for the back although only few participants experienced it. Chi-squared tests indicated that significantly more participants who tended to use tablet computers to play games reported having musculoskeletal discomfort after using a tablet. In addition, preferences for tablet tilt angles varied across tasks (reading and game playing). The results from the 3D motion analysis revealed that head and neck flexion angles were significantly reduced when the tablets were positioned at relatively steep tilt angles. Neck flexion angle was significantly higher in game playing. These data add information regarding to the usage of tablet and its associations with physical discomfort (significantly more participants who tended to use tablet computers to play games reported having musculoskeletal discomfort after using a tablet). Steep tilt angles (such as 60°) may cause tablet users to decrease their head and neck flexion angles, which could lead to a more neutral, effortless, and ergonomically correct posture. Maintaining proper neck posture during active activities such as game playing is recommended to avoid neck discomfort.

Improving the hardness of dry granulated tablets containing sodium lauryl sulfate.

Science.gov (United States)

Moore, Francis; Okelo, Geoffrey; Colón, Ivelisse; Kushner, Joseph

2010-11-15

The impact of the addition of a wetting agent, the surfactant sodium lauryl sulfate (SLS), on the tablet hardness of a dry granulated, solid oral dosage form was investigated. In three batches, SLS was added concurrently with: (1) a poorly soluble, highly hydrophobic active pharmaceutical ingredient (API) and the other excipients prior to the initial blending step, (2) magnesium stearate prior to roller compaction, or (3) magnesium stearate prior to tableting. A fourth batch, which did not contain SLS, served as a control. The maximum hardness of 100 mg, 1/4″-SRC tablets for the four batches--SLS added initially, prior to roller compaction, prior to tableting, and no SLS--were 61±3, 71±3, 89±5, and 86±3N, respectively, suggesting reduced processing of SLS improves tablet hardness by ∼50%. Dissolution of the tablets in 900 ml of simulated gastric fluid with paddles at 75 rpm showed that: (1) there was no impact on the insertion point of SLS into the process on API dissolution, and (2) that the presence of SLS improved dissolution by 5% compared to the control tablets. Adding SLS just prior to tableting can improve tablet hardness and yield similar dissolution performance relative to SLS addition prior to the initial blending step. Copyright © 2010 Elsevier B.V. All rights reserved.

Oral Delivery of Probiotics in Poultry Using pH-Sensitive Tablets.

Science.gov (United States)

Jiang, Tao; Li, Hui-Shan; Han, Geon Goo; Singh, Bijay; Kang, Sang-Kee; Bok, Jin-Duck; Kim, Dae-Duk; Hong, Zhong-Shan; Choi, Yun-Jaie; Cho, Chong-Su

2017-04-28

As alternatives to antibiotics in livestocks, probiotics have been used, although most of them in the form of liquid or semisolid formulations, which show low cell viability after oral administration. Therefore, suitable dry dosage forms should be developed for livestocks to protect probiotics against the low pH in the stomach such that the products have higher probiotics survivability. Here, in order to develop a dry dosage forms of probiotics for poultry, we used hydroxypropyl methylcellulose phthalate 55 (HPMCP 55) as a tablet-forming matrix to develop probiotics in a tablet form for poultry. Here, we made three different kinds of probiotics-loaded tablet under different compression forces and investigated their characteristics based on their survivability, morphology, disintegration time, and kinetics in simulated gastrointestinal fluid. The results indicated that the probiotics formulated in the tablets displayed higher survival rates in acidic gastric conditions than probiotics in solution. Rapid release of the probiotics from the tablets occurred in simulated intestinal fluid because of fast swelling of the tablets in neutral pH. As a matrix of tablet, HPMCP 55 provided good viability of probiotics after 6 months under refrigeration. Moreover, after oral administration of probiotics-loaded tablets to chicken, more viable probiotics were observed, than with solution type, through several digestive areas of chicken by the tablets.

Optimasi Tablet Levofloksasin yang Mengandung Bahan Pengikat PVP K-30 dan Disintegran Vivasol

Directory of Open Access Journals (Sweden)

Dina Ayu Fatmawati

2017-12-01

Full Text Available The aim of this research was to get optimal formula of levofloxacin tablet prepared with variation of PVP K-30 as binder and vivasol as disintegrant. The making of levofloxacin tablets was done by wet granulation. Tablet was prepared with various levels of PVP K-30 and disintegrant vivasol, compressed using a hydraulic press with 12 mm punch diameter, for 3 seconds. Physical quality (hardness, friability, and disintegration time and dissolution rate of tablet was evaluated. The optimization of the formula was done by factorial design of 22 factorial experiments with 2 factors (PVP K-30 and vivasol and 2 levels (2% and 4%. Optimization results showed that elevated levels of PVP K-30 increased tablet hardness, reduced friability of tablet, decreased disintegrating time, and increased dissolution rate of levofloxacin tablets. Meanwhile, elevated levels of vivasol increased the hardness of tablets, decreased the disintegrating time of tablets, decreased the dissolution rate of levofloxacin tablets, but did not affect the friability of tablets. In conclusion, the optimal tablet that meet the specifications of physical quality (hardness, friability, and disintegrating time and dissolution rate was made by 2.4 to 3.7% of PVP K-30 and 2.0 to 3.2% vivasol as shown in the feasible area of design space.

Isoniazid, pyrazinamide and rifampicin content variation in split fixed-dose combination tablets.

Science.gov (United States)

Pouplin, Thomas; Phuong, Pham Nguyen; Toi, Pham Van; Nguyen Pouplin, Julie; Farrar, Jeremy

2014-01-01

In most developing countries, paediatric tuberculosis is treated with split tablets leading to potential inaccuracy in the dose delivery and drug exposure. There is no data on the quality of first-line drugs content in split fixed-dose combination tablets. To determine Isoniazid, Pyrazinamide and Rifampicin content uniformity in split FDC tablets used in the treatment of childhood tuberculosis. Drug contents of 15 whole tablets, 30 half tablets and 36 third tablets were analysed by high performance liquid chromatography. The content uniformity was assessed by comparing drug content measured in split portions with their expected amounts and the quality of split portions was assessed applying qualitative specifications for whole tablets. All whole tablets measurements fell into the USP proxy for the three drugs. But a significant number of half and third portions was found outside the tolerated variation range and the split formulation failed the requirements for content uniformity. To correct for the inaccuracy of splitting the tablets into equal portions, a weight-adjustment strategy was used but this did not improve the findings. In split tablets the content of the three drugs is non-uniform and exceeded the USP recommendations. There is an absolute need to make child-friendly formulations available for the treatment of childhood tuberculosis.

Desarrollo tecnológico y estudio de estabilidad de tabletas de liberación inmediata de meprobamato Technological development and stability study of meprobamate immediate released tablets

Directory of Open Access Journals (Sweden)

Mirna Fernández Cervera

2010-12-01

Full Text Available Se estudió el comportamiento de diferentes variantes tecnológicas de tabletas de liberación inmediata de meprobamato (400 mg, obtenidas por granulación húmeda. El tiempo de desintegración y el porcentaje de fármaco disuelto mostraron dependencia significativa con las proporciones del lauril sulfato de sodio/croscarmelosa sódica en las formulaciones. Se evaluaron las propiedades físicas y químicas de las tabletas durante 6 meses (estabilidad acelerada y 24 meses (de vida útil, respectivamente. Se obtuvieron a partir de las formulaciones seleccionadas granulados y tabletas con propiedades organolépticas, físico-mecánicas y tecnológicas satisfactorias, lo que indicó la factibilidad del proceso de fabricación de este producto. Los resultados demostraron la buena estabilidad de las formulaciones de tabletas de liberación inmediata de meprobamato seleccionadas. La disolución in vitro no mostró diferencias significativas, por lo que ni el tiempo transcurrido ni la composición de la formulación influyeron sobre los porcentajes del fármaco disuelto. La valoración mostró diferencias significativas, sin embargo, las formulaciones evaluadas cumplieron con las especificaciones farmacéuticas oficiales durante 24 meses.The behavior of different technological variants of fast release tablets of Meprobamato (400 mg obtained by wet granulation. The desintegration time and the percentage of the dissolved drug showed a significant dependence of the sodium lauryl sulfate /sodium croscarmelose ratios present in formulae. The physical and chemical properties of tablets were assessed during 6 months (accelerated stability and dring 24 months (useful life, respectively. From the formulae selected it was possible to obtain granulates and tablets with organoleptic, physicomechanical and technological properties, demonstrating the feasibility of the process of fabrication of this product. Results showed the good stability in the immediate release

The present and the future of the tablet periodicals in Czech Republic

OpenAIRE

Kubíčková, Jana Ada

2016-01-01

The Thesis maps the Czech tablet magazine market tablet and describes possible approaches to tablet magazines' creation and distribution. First chapter outlines the historical timeline of tablet magazines development both in the Czech Republic and abroad, and maps the current situation of the Czech market. The chapter defines a concept of "strictly tablet magazine" and presents possible approaches to a production of such magazines. The following chapter analyses the concept from the new media...

How Tablets Are Utilized in the Classroom

Science.gov (United States)

Ditzler, Christine; Hong, Eunsook; Strudler, Neal

2016-01-01

New technologies are a large part of the educational landscape in the 21st century. Emergent technologies are implemented in the classroom at an exponential rate. The newest technology to be added to the daily classroom is the tablet computer. Understanding students' and teachers' perceptions about the role of tablet computers is important as this…

Determination of uranium by luminescent method (tablet variant)

International Nuclear Information System (INIS)

Sergeev, A.N.; Yufa, B.Ya.

1985-01-01

A new tablet variant of luminescent determination of uranium in rocks is developed. The analytical process includes the following operations: sample decomposition, uranium separation from luminescence quencher impurities, preparation of luminescent sample (tablet), photometry of the tablet. The method has two variants developed: the first one is characterized by a more hard decomposition, sample mass being 0.2 g; the second variant has a better detection limit (5x10 -6 %), the sample mass being 0.2-1 g. Procedures of the sample preparation for both variants of analysis are described

Effects of protoporphyrin disodium (Prolmon tablets) during radiotherapy

International Nuclear Information System (INIS)

Iwata, Takeo; Fukutomi, Toshio

1981-01-01

Effects of Prolmon tablets (medicine for hepatitis) on radiation syndrome (fatigue, nausea, vomiting, etc) which appeared during an early stage of radiotherapy were studied. Two tablets of Prolmon were administered to 10 patients with various tumors three times a day with concurrent use of other medicines during radiotherapy. A marked change in GOT and GPT values did not found, and the treatment was completed without any radiation syndrome in all patients. It was suggested that the administration of Prolmon tablets together with nutrients and vitamine preparations was effective to prevent radiation syndrome. (Tsunoda, M.)

Bioavailability of syrup and tablet formulations of cefetamet pivoxil.

Science.gov (United States)

Ducharme, M P; Edwards, D J; McNamara, P J; Stoeckel, K

1993-12-01

Two studies examining the bioavailability of cefetamet pivoxil in healthy male subjects were conducted. In the first, the bioavailabilities of the 250-mg (M250) and M500 tablet formulations of cefetamet pivoxil to be marketed were compared with that of a tablet used in clinical trials. All products were given with food at a dose of 500 mg. In the second study, the bioavailability of the syrup formulation was evaluated under both fasting and nonfasting conditions and compared with that of the M500 tablet formulation given with food. The absolute bioavailabilities of the M500 and M250 tablets (55.0% +/- 8.0% and 55.7% +/- 7.0%, respectively) were not significantly different from that of the clinical-trial formulation (49.8% +/- 8.5%). The newer tablet formulations exhibited faster absorption as evidenced by higher peak concentrations (3.8 [M500] and 3.9 [M250] mg/liter compared with 3.2 mg/liter for the clinical-trial formulation), a shorter time to peak concentration, and a shorter mean absorption time. The syrup formulation was found to have significantly lower absolute bioavailability (37.9% +/- 6.0%) compared with that of the M500 tablet (58.4% +/- 9.0%) when both were given with food. Food had no significant effect on the bioavailability of the syrup, which averaged 34.0% +/- 8.6% under fasting conditions, although absorption was delayed by food (mean absorption time increased from 2.2 to 3.9 h). This contrasts with the results of previous studies documenting significant increases in tablet bioavailability with food. Despite the lower bioavailability of the syrup, unbound-cefetamet concentrations are expected to remain above the MICs for 90% of the strains tested for susceptible organisms for approximately 10 h of the usual 12-h dosing interval with both syrup and tablet formulations of cefetamet pivoxil given with food.

Why do adult women in Vietnam take iron tablets?

Directory of Open Access Journals (Sweden)

Zhao Yun

2006-06-01

Full Text Available Abstract Background Conducting iron supplementation programs has been a major strategy to reduce iron deficiency anemia in pregnancy. However, only a few countries have reported improvements in the anemia rate at a national level. The strategies used for control of nutrition problems need regular review to maintain and improve their effectiveness. The objective of this study was to analyze the factors in compliance with taking iron tablets, where daily doses of iron (60 mg and folic acid (400 μg were distributed in rural Vietnamese communes. Methods A cross sectional survey was conducted in Nghe An province, Vietnam in January, 2003. The study population was adult women aged less than 35 years who delivered babies between August 1st 2001 and December 1st 2002 (n = 205, of which 159 took part in the study. Data for the study were collected from a series of workshops with community leaders, focus group discussions with community members and a questionnaire survey. Results Improvements in the rate of anemia was not given a high priority as one of the commune's needs, but the participants still made efforts to continue taking iron tablets. Two major factors motivated the participants to continue taking iron tablets; their experience of fewer spells of dizziness (50%, and their concern for the health of their newborn baby (54%. When examining the reasons for taking iron tablets for at least 5–9 months, the most important factor was identified as 'a frequent supply of iron tablets' (OR = 11.93, 95% CI: 4.33–32.85. Conclusion The study found that multiple poor environmental risk factors discouraged women from taking iron tablets continuously. The availability (frequent supply of iron tablets was the most effective way to help adult women to continue taking iron tablets.

Development and Validation Dissolution Analytical Method of Nimesulide beta-Cyclodextrin 400 mg Tablet

Directory of Open Access Journals (Sweden)

Carlos Eduardo Carvalho Pereira

2016-10-01

Full Text Available The nimesulide (N-(4-nitro-2-phenoxyphenylmethanesulfonamide belongs to the class of non-steroidal anti-inflammatory drugs (NSAIDs and category II of the biopharmaceutical classification, The complexation of nimesulide with b-cyclodextrin is a pharmacological strategy to increase the solubility of the drug The objective of this study was to develop and validate an analytical methodology for dissolving the nimesulide beta-cyclodextrin 400 mg tablet and meets the guidelines of ANVISA for drug registration purposes. Once developed, the dissolution methodology was validated according to the RE of parameters no.  899/2003. In the development of the method it was noted that the duration of the dissolution test was 60 minutes, the volume and the most suitable dissolution medium was 900 mL of aqueous solution of sodium lauryl sulfate 1% (w/ v. It was also noted that rotation of 100 rpm and the paddle apparatus was the most appropriate to evaluate the dissolution of the drug. Spectrophotometric methodology was used to quantify the percentage of dissolved drug. The wavelength was 390 nm using the quantification. The validation of the methodology, system suitability parameters, specificity/selectivity, linearity, precision, accuracy and robustness were satisfactory and proved that the developed dissolution methodology was duly executed. DOI: http://dx.doi.org/10.17807/orbital.v8i5.827

Tablets Helping Elderly and Disabled People

OpenAIRE

Castro, Mercedes de; Ruiz-Mezcua, Belén; Sánchez-Pena, José Manuel; García-Crespo, Ángel; Iglesias, Ana; Pajares, José Luis

2012-01-01

Proceedings of: Ambient Assisted Living Joint Programme Forum 2011 (AAL JP Forum 2011), Lecce (Italy), September 26-28, 2011 The article introduces the basics by which tablets are considered as appropriate tools for integration and promotion of the elderly in the digital world. To prove this, the paper presents three research projects carried out by CESyA that integrate Automatic Speech Recognition (ASR), Voice Synthesis, subtitling, audiodescription or audio navigation tools into tablets ...

Assessment of Albizia zygia gum as binding agent in tablet formulations

OpenAIRE

ODEKU, OLUWATOYIN A.

2005-01-01

Albizia gum has been evaluated as a binding agent in tablet formulations in comparison with gelatin BP. Compressional properties were analyzed using density measurements and the compression equations of Heckel and Kawakita as assessment parameters, while the mechanical properties of the tablets were assessed using the crushing strength and friability of the tablets. Drug release properties of the tablets were assessed using disintegration time and dissolution time as assessment parameters. Fo...

Multispectral UV imaging for determination of the tablet coating thickness

DEFF Research Database (Denmark)

Novikova, Anna; Carstensen, Jens Michael; Zeitler, J. Axel

2017-01-01

The applicability of off-line multispectral ultraviolet (UV) imaging in combination with multivariate data analysis was investigated to determine the coating thickness and its distribution on the tablet surface during lab scale coating. The UV imaging results were compared with the weight gain...... measured for each individual tablet and the corresponding coating thickness and its distribution measured by terahertz pulsed imaging (TPI). Three different tablet formulations were investigated, two of which contained UV active tablet cores. Three coating formulations were applied: Aquacoat® ECD (a mainly...... translucent coating) and Eudragit® NE (a turbid coating containing solid particles). It was shown that UV imaging is a fast and non-destructive method to predict individual tablet weight gain as well as coating thickness. The coating thickness distribution profiles determined by UV imaging correlated...

Student Perceptions of Using Tablet Technology in Post-Secondary Classes

Science.gov (United States)

Mang, Colin F.; Wardley, Leslie J.

2013-01-01

This paper assesses students' attitudes towards using tablets, such as the Apple iPad, in university classes. Tablets are found to be a substitute for laptop computers. Students initially expressed a great deal of optimism regarding the technology, and, although their views diminished slightly as they gained experience with using a tablet,…

Fused-filament 3D printing (3DP) for fabrication of tablets.

Science.gov (United States)

Goyanes, Alvaro; Buanz, Asma B M; Basit, Abdul W; Gaisford, Simon

2014-12-10

The use of fused-filament 3D printing (FF 3DP) to fabricate individual tablets is demonstrated. The technology permits the manufacture of tablets containing drug doses tailored to individual patients, or to fabrication of tablets with specific drug-release profiles. Commercially produced polyvinyl alcohol (PVA) filament was loaded with a model drug (fluorescein) by swelling of the polymer in ethanolic drug solution. A final drug-loading of 0.29% w/w was achieved. Tablets of PVA/fluorescein (10 mm diameter) were printed using a 3D printer. It was found that changing the degree of infill percentage in the printer software varied the weight and volume of the printed tablets. The tablets were mechanically strong and no significant thermal degradation of the active occurred during printing. Dissolution tests were conducted in modified Hank's buffer. The results showed release profiles were dependent on the infill percentage used to print the tablet. The study indicates that FF 3DP has the potential to offer a new solution for fabricating personalized-dose medicines or unit dosage forms with controlled-release profiles. In addition, the low cost of FDM printers means the paradigm of extemporaneous or point-of-use manufacture of personalized-dose tablets is both feasible and attainable. Copyright © 2014 Elsevier B.V. All rights reserved.

Correlating bilayer tablet delamination tendencies to micro-environmental thermodynamic conditions during pan coating.

Science.gov (United States)

Zacour, Brian M; Pandey, Preetanshu; Subramanian, Ganeshkumar; Gao, Julia Z; Nikfar, Faranak

2014-06-01

The objective of this study was to determine the impact that the micro-environment, as measured by PyroButton data loggers, experienced by tablets during the pan coating unit operation had on the layer adhesion of bilayer tablets in open storage conditions. A full factorial design of experiments (DOE) with three center points was conducted to study the impact of final tablet hardness, film coating spray rate and film coating exhaust temperature on the delamination tendencies of bilayer tablets. PyroButton data loggers were placed (fixed) at various locations in a pan coater and were also allowed to freely move with the tablet bed to measure the micro-environmental temperature and humidity conditions of the tablet bed. The variance in the measured micro-environment via PyroButton data loggers accounted for 75% of the variance in the delamination tendencies of bilayer tablets on storage (R(2 )= 0.75). A survival analysis suggested that tablet hardness and coating spray rate significantly impacted the delamination tendencies of the bilayer tablets under open storage conditions. The coating exhaust temperature did not show good correlation with the tablets' propensity to crack indicating that it was not representative of the coating micro-environment. Models created using data obtained from the PyroButton data loggers outperformed models created using primary DOE factors in the prediction of bilayer tablet strength, especially upon equipment or scale transfers. The coating micro-environment experienced by tablets during the pan coating unit operation significantly impacts the strength of the bilayer interface of tablets on storage.

Distribution of crushing strength of tablets

DEFF Research Database (Denmark)

Sonnergaard, Jørn

2002-01-01

The distribution of a given set of data is important since most parametric statistical tests are based on the assumption that the studied data are normal distributed. In analysis of fracture mechanics the Weibull distribution is widely used and the derived Weibull modulus is interpreted as a mate...... data from nine model tablet formulations and four commercial tablets are shown to follow the normal distribution. The importance of proper cleaning of the crushing strength apparatus is demonstrated....

Triiodothyronine and thyroxine content of desiccated thyroid tablets.

Science.gov (United States)

Rees-Jones, R W; Larsen, P R

1977-11-01

Triiodothyronine (T3) and thyroxine (T4) were measured by radioimmunoassay in Pronase hydrolysates of four lots each of 1- and 2-grain tablets of desiccated thyroid (Thyroid, Armour) and thyroglobulin (Proloid, Warner-Chilcott). The methodology used was verified by studies of tablets containing known quantities of T4 and T3. One grain of desiccated thyroid contained 12 +/- 1 and 64 +/- 3 microgram (mean +/- SD) of T3 and T4 per tablet, respectively (T4/T3 molar ratio, 4.3). A 1-grain tablet of thyroglobulin contained 16 +/- 2 and 55 +/- 5 microgram of T3 and T4, respectively with a T4/T3 ratio of 2.9. Two-grain tablets generally contained twice the quantity of T3 and T4 in the 1-grain preparations. The variation in T3 and T4 content between the four lots of each tablet strength for each product was 10% or less. These estimates of T3 and T4 content are 1.5- to 2-fold greater than those previously published. This difference probably results from the more sophisticated methodology now available which does not require chromatographic separation of T3 and T4 or iodometry. Using calculations based on published estimates of T4 and T3 absorption and of the T3/T4 potency ratio, it would appear that the T3 content of desiccated thyroid and thyroglobulin provide approximately 39% and 51%, respectively, of the thyromimetic activity of these two medications.

FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN KEPATUHAN IBU MENGONSUMSI TABLET BESI-FOLAT SELAMA KEHAMILAN

Directory of Open Access Journals (Sweden)

Luh Ade Ari Wiradnyani

2013-11-01

Full Text Available ABSTRACTThis review aims at compiling and summarizing findings of published studies that assessed factors associated with compliance of women to take recommended iron tablets during pregnancy. The review is done in 10 published studies (8 are 2002—2010 publications and 2 are 1993—1994 publications indexed in Pubmed with the above objective. Low utilization of antenatal care/ANC services is found to be associated with low compliance as it prevents the women to receive recommended number of the iron tablets as well as decrease the opportunity of women to have encouragement from health staff to take the tablets. Supply of tablets becomes the issue since not all women receiving 30 tablets/ANC visits as recommended. Studies on influence of side-effects of taking the tablets to compliance show inconclusive findings. Some studies found the effect is very minimal, and can be managed appropriately especially among more educated women and among women with adequate counseling. Studies also indicated that support from family is important to reduce possibility of pregnant women forgot to take the tablets, the other major factor of the low compliance. Quality of counseling, e.g. clarity of the messages, is associated with compliance. In conclusion, improving support from ANC provider (such as sufficient tablet supply, clear message on the tablets benefits and support from family may contribute to better compliance of women towards maternal iron supplementation.Keywords: compliance, iron supplementation, pregnancyABSTRAKReview ini bertujuan mengumpulkan temuan studi yang mengukur faktor yang berhubungan dengan kepatuhan ibu dalam mengonsumsi tablet besi selama kehamilan. Review dilakukan pada 10 studi (8 publikasi tahun 2002—2010, 2 publikasi tahun 1993—1994 yang terdaftar di Pubmed. Rendahnya partisipasi ibu hamil untuk memeriksakan kehamilannya/ANC berhubungan dengan rendahnya kepatuhan konsumsi tablet besi. Rendahnya kunjungan ANC membuat ibu tidak

Formulation of Sustained-Release Diltiazem Matrix Tablets Using ...

African Journals Online (AJOL)

Formulation of Sustained-Release Diltiazem Matrix Tablets Using Hydrophilic Gum Blends. A Moin, H.G Shivakumar. Abstract. Purpose: To develop sustained release matrix tablets of diltiazem hydrochloride (DTZ) using karaya gum (K) alone or in combination with locust bean gum (LB) and hydroxypropyl methylcellulose ...

The possession of brochures on emergency and of iodide tablets by households

International Nuclear Information System (INIS)

Hultaaker, Oe.

1985-01-01

People who live within twelve to fifteen kilometers from one of the Swedish Nuclear Power plants have received a brochure about existing security arrangements and the actions which they are recommended to take in the wake of a nuclear accident. Tablets containing potassium iodide have also been handed out to the people living close to the power plants. Due to the short life of the iodide tablets, people receive new ones from time to time. Before the distribution of new tablets, however, the National Institute of Radiation Protection wanted to learn if people still had the old tablets and the brochure in their homes. The National Institute of Radiation Protection also was interested in assessing people's knowledge about the protection given by the iodide tablets and whether people knew when to take them. Nine persons out of ten (87%) could show the tablets to the interviewers, and seven out of ten (71%) could do so with the brochure. Half of the total number of respondents knew when they were supposed to take the tablets (47%). Nevertheless two partly conflicting messages have been given to the public about the proper time to take the tablet: according to the text printed on the cover of the tablets, they are to be taken immediately when the people have learnt about an accident; but according to the brochure distributed to the households, people must wait until they are told by the radio to take the tablets. One person of four (22%) said that the radio should inform them, and almost the same number of people (25%) said that the tablets ought to be taken immediately following an accident. Only one person of four (27%) knew what protection they would get from the iodine tablets. Another 17% had a vague idea about the affect resulting from taking them. Many people (25%) had the false belief that the tablets offered them general protection against radiation. (author)

Enabling the Tablet Product Development of 5-Fluorocytosine by Conjugate Acid Base Cocrystals.

Science.gov (United States)

Perumalla, Sathyanarayana R; Paul, Shubhajit; Sun, Changquan C

2016-06-01

5-Fluorocytosine (FC) is a high-dose antifungal drug that challenges the development of a tablet product due to poor solid-state stability and tabletability. Using 2 pharmaceutically acceptable conjugate acid base (CAB) cocrystals of FC with HCl and acesulfame, we have developed commercially viable high loading FC tablets. The tablets were prepared by direct compression using nano-coated microcrystalline cellulose Avicel PH105 as a tablet binder, which provided both excellent tabletability and good flowability. Commercial manufacturability of formulations based on both CAB cocrystals was verified on a compaction simulator. The results from an expedited friability study were used to set the compaction force, which yielded tablets with sufficient mechanical strength and rapid tablet disintegration. This work demonstrates the potential value of CAB cocrystals in drug product development. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Disintegration of chemotherapy tablets for oral administration in patients with swallowing difficulties.

Science.gov (United States)

Siden, Rivka; Wolf, Matthew

2013-06-01

The administration of oral chemotherapeutic drugs can be problematic in patients with swallowing difficulties. Inability to swallow solid dosage forms can compromise compliance and may lead to poor clinical outcome. The current technique of tablet crushing to aid in administration is considered an unsafe practice. By developing a technique to disintegrate tablets in an oral syringe, the risk associated with tablet crushing can be avoided. The purpose of this study was to determine the feasibility of using disintegration in an oral syringe for the administration of oral chemotherapeutic tablets. Eight commonly used oral chemotherapeutic drugs were tested. Tablets were placed in an oral syringe and allowed to disintegrate in tap water. Various volumes and temperatures were tested to identify which combination allows for complete disintegration of the tablet in the shortest amount of time. The oral syringe disintegration method was considered feasible if disintegration occurred in ≤15 min and in ≤20 mL of water and the dispersion passed through an oral syringe tip. The following tablets were shown to disintegrate within 15 min and in disintegration test. Disintegrating oral chemotherapeutic tablets in a syringe provides a closed system to administer hazardous drugs and allows for the safe administration of oral chemotherapeutic drugs in a tablet form to patients with swallowing difficulties.

Portable Tablets in Science Museum Learning: Options and Obstacles

Science.gov (United States)

Gronemann, Sigurd Trolle

2017-06-01

Despite the increasing use of portable tablets in learning, their impact has received little attention in research. In five different projects, this media-ethnographic and design-based analysis of the use of portable tablets as a learning resource in science museums investigates how young people's learning with portable tablets matches the intentions of the museums. By applying media and information literacy (MIL) components as analytical dimensions, a pattern of discrepancies between young people's expectations, their actual learning and the museums' approaches to framing such learning is identified. It is argued that, paradoxically, museums' decisions to innovate by introducing new technologies, such as portable tablets, and new pedagogies to support them conflict with many young people's traditional ideas of museums and learning. The assessment of the implications of museums' integration of portable tablets indicates that in making pedagogical transformations to accommodate new technologies, museums risk opposing didactic intention if pedagogies do not sufficiently attend to young learners' systemic expectations to learning and to their expectations to the digital experience influenced by their leisure use.

The Women at work in the Linear B Tablets

DEFF Research Database (Denmark)

Nosch, Marie-Louise Bech

2003-01-01

The article investigates the role of women in Mycenaean society according to the Linear B tablets......The article investigates the role of women in Mycenaean society according to the Linear B tablets...

Tablet-Based Education to Reduce Depression-Related Stigma

Science.gov (United States)

Lu, Catherine; Winkelman, Megan; Wong, Shane Shucheng

2016-01-01

Objectives: This study investigated the efficacy of a tablet-based multimedia education application, the Project Not Alone Depression Module, in improving depression literacy and reducing depression stigma among a community-based mental health clinic population. Methods: A total of 93 participants completed either a tablet-based multimedia…

The rationale of scored tablets as dosage form.

NARCIS (Netherlands)

Rodenhuis, N.; Smet, P.A.G.M. de; Barends, D.M.

2004-01-01

The aim of the study was to get insight into the rationale of scored tablets. This was pursued by studying patient's reasons for subdividing ("breaking") scored and unscored tablets. Patients who picked up their prescriptions in 5 community pharmacies in The Netherlands were questioned. Two-hundred

Preparation and biological efficacy of haddock bone calcium tablets

Science.gov (United States)

Huo, Jiancong; Deng, Shanggui; Xie, Chao; Tong, Guozhong

2010-03-01

To investigate the possible use of waste products obtained after processing haddock, the present study prepared haddock bone calcium powder by NaOH and ethanol soaking (alkalinealcohol method) and prepared haddock bone calcium tablets using the powder in combination with appropriate excipients. The biological efficacy of the haddock bone calcium tablets was investigated using Wistar rats as an experiment model. Results show that the optimal parameters for the alkalinealcohol method are: NaOH concentration 1 mol/L, immersion time 30 h; ethanol concentration 60%, immersion time 15 h. A mixture of 2% polyvinylpyrrolidone in ethanol was used as an excipient at a ratio of 1:2 to full-cream milk powder, without the use of a disintegrating agent. This process provided satisfactory tablets in terms of rigidity and taste. Animal studies showed that the haddock bone calcium tablets at a dose of 2 g·kg-1·d-1 or 5g·kg-1·d-1 significantly increased blood calcium and phosphorus levels and bone calcium content in rats. Therefore, these tablets could be used for calcium supplementation and prevent osteoporosis. Although the reasons of high absorption in the rats fed with haddock bone calcium tablets are unclear, it is suggested that there are some factors, such as treatment with method of alkaline-alcohol or the added milk, may play positive roles in increasing absorption ratio.

Penggunaan Tablet di Binus Online Learning

OpenAIRE

Agus Putranto; Wawan Saputra

2014-01-01

Utilization of e-learning can improve learning effectiveness and flexibility. Features of e-learning that are important in teaching and learning activities are tasks features, discussion forums and discussion face to face in a video conference. BINUS Online Learning is a program that offers students to conduct online lectures. Online BINUS need to think about software and hardware that must be provided in a tablet. Therefore, this study will analyze the use of the tablet which will be used fo...

Security Approaches in Using Tablet Computers for Primary Data Collection in Clinical Research

OpenAIRE

Wilcox, Adam B.; Gallagher, Kathleen; Bakken, Suzanne

2013-01-01

Next-generation tablets (iPads and Android tablets) may potentially improve the collection and management of clinical research data. The widespread adoption of tablets, coupled with decreased software and hardware costs, has led to increased consideration of tablets for primary research data collection. When using tablets for the Washington Heights/Inwood Infrastructure for Comparative Effectiveness Research (WICER) project, we found that the devices give rise to inherent security issues asso...

Accuracy of tablet splitting and liquid measurements: an examination of who, what and how.

Science.gov (United States)

Abu-Geras, Dana; Hadziomerovic, Dunja; Leau, Andrew; Khan, Ramzan Nazim; Gudka, Sajni; Locher, Cornelia; Razaghikashani, Maryam; Lim, Lee Yong

2017-05-01

To examine factors that might affect the ability of patients to accurately halve tablets or measure a 5-ml liquid dose. Eighty-eight participants split four different placebo tablets by hand and using a tablet splitter, while 85 participants measured 5 ml of water, 0.5% methylcellulose (MC) and 1% MC using a syringe and dosing cup. Accuracy of manipulation was determined by mass measurements. The general population was less able than pharmacy students to break tablets into equal parts, although age, gender and prior experience were insignificant factors. Greater accuracy of tablet halving was observed with tablet splitter, with scored tablets split more equally than unscored tablets. Tablet size did not affect the accuracy of splitting. However, >25% of small scored tablets failed to be split by hand, and 41% of large unscored tablets were split into >2 portions in the tablet splitter. In liquid measurement, the syringe provided more accurate volume measurements than the dosing cup, with higher accuracy observed for the more viscous MC solutions than water. Formulation characteristics and manipulation technique have greater influences on the accuracy of medication modification and should be considered in off-label drug use in vulnerable populations. © 2016 Royal Pharmaceutical Society.

Multispectral UV Imaging for Determination of the Tablet Coating Thickness.

Science.gov (United States)

Novikova, Anna; Carstensen, Jens M; Zeitler, J Axel; Rades, Thomas; Leopold, Claudia S

2017-06-01

The applicability of off-line multispectral UV imaging in combination with multivariate data analysis was investigated to determine the coating thickness and its distribution on the tablet surface during lab-scale coating. The UV imaging results were compared with the weight gain measured for each individual tablet and the corresponding coating thickness and its distribution measured by terahertz pulsed imaging (TPI). Three different tablet formulations were investigated, 2 of which contained UV-active tablet cores. Three coating formulations were applied: Aquacoat® ECD (a mainly translucent coating) and Eudragit® NE (a turbid coating containing solid particles). It was shown that UV imaging is a fast and nondestructive method to predict individual tablet weight gain as well as coating thickness. The coating thickness distribution profiles determined by UV imaging correlated to the results of the TPI measurements. UV imaging appears to hold a significant potential as a process analytical technology tool for determination of the tablet coating thickness and its distribution resulting from its high measurement speed, high molar absorptivity, and a high scattering coefficient, in addition to relatively low costs. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Use of tablets for instruction and learning in microbiology labs

DEFF Research Database (Denmark)

Møller, Karen Louise; Jelsbak, Vibe Alopaeus; Georgsen, Marianne

of this project are to develop a technological infrastructure to support students’ work in the lab and to develop teaching and learning resources. Our research question is: How is teaching and learning in the laboratory influenced by the tablets and the following multimodal teaching and learning materials...... and taken notes by hand. Use of tablets in the lab offers new opportunities. In September 2012, nine tablets were introduced into one of the labs of the college. Groups of students use the tablets to access documents, watch video instructions, and to document results and procedures digitally. The objectives......? The empirical part of the project has been documented through field observations in the lab (in writing and with photos). We have found the following to be characteristic of the work of the students: the students use the tablets collaboratively, take more photos than requested, use the video based instructions...

Effect of gel formation on the dissolution behavior of clarithromycin tablets.

Science.gov (United States)

Inukai, Koki; Takiyama, Kei; Noguchi, Shuji; Iwao, Yasunori; Itai, Shigeru

2017-04-15

Clarithromycin (CAM) is a macrolide antibiotic that is widely used at clinical sites. We found that release of CAM is suppressed when tablets of CAM were exposed to an external solvent containing carboxylate buffers such as citrate. The suppressed release of CAM can be attributed to the formation of gels on the tablet surfaces, which inhibits penetration of the solvent into the tablet and thus disintegration of the tablets. Delayed disintegration of the tablets was also observed for commercial tablets. This suggests that taking CAM and carboxylates at the same time might be avoided. The crystal structure of CAM citrate reveals that molecular chains of CAM are cross-linked by hydrogen bond between citrate groups in the crystal. The crystal structure indicates that cross-linked CAM chains of the three-dimensional mesh structure might also be formed in high concentration CAM solutions in the presence of carboxylates, resulting in gel formation. Copyright © 2017 Elsevier B.V. All rights reserved.

Keep taking the tablets? Assessing the use of tablet devices in learning and teaching activities in the Further Education sector

Directory of Open Access Journals (Sweden)

Khristin Fabian

2014-02-01

Full Text Available This article summarises the methodology and outcomes of an interventionist/action research project to assess the benefits, and potential pitfalls, of the use of mobile devices in learning and teaching activities in a Further Education environment. A bank of 15 tablet devices were purchased and prepared for classroom use. Staff members were approached to scope potential activities and uses for the tablet devices. Three departments took part in the research activity: the Language School, Social and Vocational Studies and the Hairdressing department. Use of the tablets was varied in nature and included: use of multimedia tools, use of apps, creation and use of a bespoke app, multimedia manipulation and sharing, and creation of an online e-portfolio. Staff and student feedback was gathered during and after the project, and project authors were present during classroom activities for observation and recording purposes. Overall feedback was very positive, but there were issues with tablet use and administration. One of the major issues was the onerous nature of the security setup, and app administration.

Characterising the disintegration properties of tablets in opaque media using texture analysis

OpenAIRE

Scheuerle, Rebekah L.; Gerrard, Stephen E.; Kendall, Richard A.; Tuleu, Catherine; Slater, Nigel K.H.; Mahbubani, Krishnaa T.

2015-01-01

Tablet disintegration characterisation is used in pharmaceutical research, development, and quality control. Standard methods used to characterise tablet disintegration are often dependent on visual observation in measurement of disintegration times. This presents a challenge for disintegration studies of tablets in opaque, physiologically relevant media that could be useful for tablet formulation optimisation. In this study is explored an application of texture analysis disintegration testin...

Tablet computers to support outpatient pulmonary rehabilitation in patients with COPD

DEFF Research Database (Denmark)

Ringbaek, Thomas J.; Lavesen, Marie; Lange, Peter

2016-01-01

BACKGROUND: A minicomputer (tablet) with instructions and a training diary has the potential of facilitating adherence to pulmonary rehabilitation (PR). OBJECTIVE: To evaluate the effect of adding a tablet to a classic outpatient PR programme for COPD patients. METHODS: A total of 115 patients...... participated in a 7- to 10-week outpatient PR programme in groups of 10-12 individuals. Half of the groups were assigned to PR plus a tablet (tablet group) and the other groups were assigned to PR only (controls). Primary effect parameters were endurance shuttle walk time (ESWT) and disease-specific health...... status (COPD Assessment Test=CAT). RESULTS: The change in ESWT was significantly better in the control group (mean 167 sec) compared with the tablet group (mean 51 sec) (p

Resveratrol cocrystals with enhanced solubility and tabletability.

Science.gov (United States)

Zhou, Zhengzheng; Li, Wanying; Sun, Wei-Jhe; Lu, Tongbu; Tong, Henry H Y; Sun, Changquan Calvin; Zheng, Ying

2016-07-25

Two new 1:1 cocrystals of resveratrol (RES) with 4-aminobenzamide (RES-4ABZ) and isoniazid (RES-ISN) were synthesized by liquid assisted grinding (LAG) and rapid solvent removal (RSR) methods using ethanol as solvent. Their physiochemical properties were characterized using PXRD, DSC, solid state and solution NMR, FT-IR, and HPLC. Pharmaceutically relevant properties, including tabletability, solubility, intrinsic dissolution rate, and hygroscopicity, were evaluated. Temperature-composition phase diagram for RES-ISN cocrystal system was constructed from DSC data. Both cocrystals show higher solubility than resveratrol over a broad range of pH. They are phase stable and non-hygroscopic even under high humidity conditions. Importantly, both cocrystals exhibit improved solubility and tabletability compared with RES, which make them more suitable candidates for tablet formulation development. Copyright © 2016 Elsevier B.V. All rights reserved.

Compressional, mechanical and release properties of a novel gum in paracetamol tablet formulations

Directory of Open Access Journals (Sweden)

Adedokun Musiliu O.

2014-09-01

Full Text Available The binding properties of Eucalyptus gum obtained from the incised trunk of Eucalyptus tereticornis, were evaluated in paracetamol tablet formulations, in comparison with that of Gelatin B.P. In so doing, the compression properties were analyzed using density measurements and the compression equations of Heckel, Kawakita and Gurham. In our work, the mechanical properties of the tablets were assessed using the crushing strength and friability of the tablets, while the drug release properties of the tablets were assessed using disintegration and dissolution times. The results of the study reveal that tablet formulations incorporating Eucalyptus gum as binder, exhibited faster onset and higher amount of plastic deformation during compression than those containing gelatin. What is more, the Gurnham equation could be used as a substitute for the Kawakita equation in describing the compression properties of pharmaceutical tablets. Furthermore, the crushing strength, disintegration and dissolution times of the tablets increased with binder concentration, while friability values decreased. We noted that no significant differences in properties exist between formulations derived from the two binders (p > 0.05 exist. While tablets incorporating gelatin exhibited higher values for mechanical properties, Eucalyptus gum tablets had better balance between mechanical and release properties - as seen from the CSFR/Dt values. Tablets of good mechanical and release properties were prepared using Eucalyptus gum as a binder, and, therefore, it could serve as an alternative binder in producing tablets with good mechanical strength and fast drug release.

Evaluation of disintegration and dissolution of chloroquine tablets in ...

African Journals Online (AJOL)

Evaluation of disintegration and dissolution of chloroquine tablets in some States in Northern Nigeria. ... This study seeks to assess the quality of chloroquine tablets in some States in Northern Nigeria by determining ... HOW TO USE AJOL.

Determination of Letrozole in Tablet Formulations by Reversed ...

African Journals Online (AJOL)

Determination of Letrozole in Tablet Formulations by Reversed Phase High Performance Liquid Chromatography. ... The assay values for the two branded letrozole tablets tested were 99.2 and 100.2 %, respectively with % relative standard deviation (RSD) of 0.781 and 0.568, respectively. The bench top stability data of the ...

Optimization and Formulation of Orodispersible Tablets of Meloxicam

African Journals Online (AJOL)

... 98.5% and fast drug release rate of 99.5% within 30 min, as compared with the conventional tablet (49.5%) . Conclusion: It is feasible to formulate orodispersible tablets of meloxican with acceptable disintegration time, rapid drug release and good hardness, which could be amenable to replication on an industrial scale.

An Exploratory Study Investigating How and Why Managers Use Tablets to Support Managerial Decision-Making

Directory of Open Access Journals (Sweden)

Meng Xiao

2017-11-01

Full Text Available Managers are often mobile and a large proportion of their work is dealing with decisions. Although many managers currently use tablet computers in their work, there is little research on the use of tablets for managerial decision-support. This exploratory study aims to investigate the ways in which managers use tablets to support their decision-making and the reasons why they do so. Using Task-Technology Fit theory, semi-structured interviews were conducted with 20 managers, 17 of whom used tablets for their work-related decision-making. The study reveals managers’ tablet usage patterns in terms of location, tablet applications, decision activities and types. This study has also found that a range of tablet characteristics and decision-task characteristics affect managers’ use of tablets to support decision-making at work. This exploratory study contributes to both academia and industry by providing evidence on the tablet decision-support area, and affording organisations, tablet vendors and tablet application developers informative findings for further improvement in the provision of tablet-based decision support.

Tablet computers for recording tuberculosis data at a community ...

African Journals Online (AJOL)

Tablet computers for recording tuberculosis data at a community health centre in King Sabata Dalindyebo Local Municipality, ... South African Family Practice ... They expressed a desire to extend the use of tablets to other areas of their work.

Drug Release Kinetics and Front Movement in Matrix Tablets Containing Diltiazem or Metoprolol/λ-Carrageenan Complexes

Directory of Open Access Journals (Sweden)

Ruggero Bettini

2014-01-01

Full Text Available In this work we investigated the moving boundaries and the associated drug release kinetics in matrix tablets prepared with two complexes between λ-carrageenan and two soluble model drugs, namely, diltiazem HCl and metoprolol tartrate aiming at clarifying the role played by drug/polymer interaction on the water uptake, swelling, drug dissolution, and drug release performance of the matrix. The two studied complexes released the drug with different mechanism indicating two different drug/polymer interaction strengths. The comparison between the drug release behaviour of the complexes and the relevant physical mixtures indicates that diltiazem gave rise to a less soluble and more stable complex with carrageenan than metoprolol. The less stable metoprolol complex afforded an erodible matrix, whereas the stronger interaction between diltiazem and carrageenan resulted in a poorly soluble, slowly dissolving matrix. It was concluded that the different stability of the studied complexes affords two distinct drug delivery systems: in the case of MTP, the dissociation of the complex, as a consequence of the interaction with water, affords a classical soluble matrix type delivery system; in the case of DTZ, the dissolving/diffusing species is the complex itself because of the very strong interaction between the drug and the polymer.

Demonstration of pharmaceutical tablet coating process by injection molding technology.

Science.gov (United States)

Puri, Vibha; Brancazio, David; Harinath, Eranda; Martinez, Alexander R; Desai, Parind M; Jensen, Keith D; Chun, Jung-Hoon; Braatz, Richard D; Myerson, Allan S; Trout, Bernhardt L

2018-01-15

We demonstrate the coating of tablets using an injection molding (IM) process that has advantage of being solvent free and can provide precision coat features. The selected core tablets comprising 10% w/w griseofulvin were prepared by an integrated hot melt extrusion-injection molding (HME-IM) process. Coating trials were conducted on a vertical injection mold machine. Polyethylene glycol and polyethylene oxide based hot melt extruded coat compositions were used. Tablet coating process feasibility was successfully demonstrated using different coating mold designs (with both overlapping and non-overlapping coatings at the weld) and coat thicknesses of 150 and 300 μm. The resultant coated tablets had acceptable appearance, seal at the weld, and immediate drug release profile (with an acceptable lag time). Since IM is a continuous process, this study opens opportunities to develop HME-IM continuous processes for transforming powder to coated tablets. Copyright © 2017 Elsevier B.V. All rights reserved.

Stabilization Mechanism of Roxithromycin Tablets under Gastric pH Conditions.

Science.gov (United States)

Inukai, Koki; Noguchi, Shuji; Kimura, Shin-Ichiro; Itai, Shigeru; Iwao, Yasunori

2018-05-31

Macrolide antibiotics are widely used at clinical sites. Clarithromycin (CAM), a 14-membered macrolide antibiotic, was reported to gelate under acidic conditions. Gelation allows oral administration of acid-sensitive CAM without enteric coating by hindering the penetration of gastric fluid into CAM tablets. However, it is unknown whether this phenomenon occurs in other macrolide antibiotics. In this study, we examined the gelation ability of three widely used macrolide antibiotics, roxithromycin (RXM), erythromycin A (EM), and azithromycin (AZM). The results indicated that not only CAM but also RXM gelated under acidic conditions. EM and AZM did not gelate under the same conditions. Gelation of RXM delayed the disintegration of the tablet and release of RXM from the tablet. Disintegration and release were also delayed in commercial RXM tablets containing disintegrants. This study showed that two of the four macrolides gelated, which affects tablet disintegration and dissolution and suggests that this phenomenon might also occur in other macrolides. Copyright © 2018. Published by Elsevier Inc.

Enhancing the Classroom Experience: Instructor Use of Tablets

Science.gov (United States)

Cummings, Jeff; Hill, Stephen

2015-01-01

Instructors continually search for innovative approaches to interact with and engage students in the classroom. The tablet offers a potential innovation for this purpose. Tablet devices from Apple, Microsoft, and other hardware vendors have overcome many of the challenges of the past (e.g. cost and limited applications) to become useful tools for…

Equivalency of Paper versus Tablet Computer Survey Data

Science.gov (United States)

Ravert, Russell D.; Gomez-Scott, Jessica; Donnellan, M. Brent

2015-01-01

Survey responses collected via paper surveys and computer tablets were compared to test for differences between those methods of obtaining self-report data. College students (N = 258) were recruited in public campus locations and invited to complete identical surveys on either paper or iPad tablet. Only minor homogeneity differences were found…

Development of natural gum based fast disintegrating tablets of glipizide

OpenAIRE

Antesh Kumar Jha; Dipak Chetia

2012-01-01

Dysphagia and risk of choking are leading causes of patient non-compliance in the self-administration of conventional tablets. To overcome these limitations of conventional tablets fast-disintegrating tablets were developed, using natural gums. Natural gums were evaluated for bulk swelling capacity. Powder mix containing natural gums and glipizide was evaluated for water sorption, swelling index and capillary action. For faster onset and immediate hypoglycemic action, the fast disintegrating ...

Evaluation of matrix type mucoadhesive tablets containing indomethacin for buccal application.

Science.gov (United States)

Ikeuchi-Takahashi, Yuri; Sasatsu, Masanaho; Onishi, Hiraku

2013-09-10

Nonsteroidal anti-inflammatory drugs (NSAIDs) are administered for pain relief from oral mucositis. However, the systemic administration of NSAIDs is limited due to systemic side effects. To avoid these side effects and treat local lesions effectively, a matrix type mucoadhesive tablet was developed. A mixture of hard fat, ethylcellulose (EC) and polyethylene glycol (PEG) was used as a matrix base, and indomethacin (IMC) was used as the principal agent. In tablets consisting of hard fat, EC and IMC, the drug release was sustained. In tablets consisting of hard fat, EC, considerable amounts of PEG and IMC, the drug release was relatively increased and IMC existed as the molecular phase or in an amorphous state. The in vitro adhesive force of the tablets consisting of hard fat, EC, considerable amounts of PEG and IMC was significantly increased as compared with the tablets consisting of hard fat and IMC. A significantly high tissue concentration and significantly low plasma concentration were observed after buccal administration of this matrix type mucoadhesive tablet as compared with that after oral administration of IMC. Thus, the matrix type mucoadhesive tablet has good potential as a preparation for the treatment of pain due to oral aphtha. Copyright © 2013 Elsevier B.V. All rights reserved.

The Nebusarsekim Tablet

NARCIS (Netherlands)

Stadhouders, H.A.I.

2008-01-01

During the summer of 2007 an internet hype was unleashed by the breaking news that an Old Testament name of some importance, figuring in the Book of Jeremiah Ch. 39, had been positively identified on a cuneiform clay tablet, viz. a bill of receipt from the time of this prophet's floruit. Many a

Dissolution testing of isoniazid, rifampicin, pyrazinamide and ethambutol tablets using near-infrared spectroscopy (NIRS) and multivariate calibration.

Science.gov (United States)

de Oliveira Neves, Ana Carolina; Soares, Gustavo Mesquita; de Morais, Stéphanie Cavalcante; da Costa, Fernanda Saadna Lopes; Porto, Dayanne Lopes; de Lima, Kássio Michell Gomes

2012-01-05

This work utilized the near-infrared spectroscopy (NIRS) and multivariate calibration to measure the percentage drug dissolution of four active pharmaceutical ingredients (APIs) (isoniazid, rifampicin, pyrazinamide and ethambutol) in finished pharmaceutical products produced in the Federal University of Rio Grande do Norte (Brazil). The conventional analytical method employed in quality control tests of the dissolution by the pharmaceutical industry is high-performance liquid chromatography (HPLC). The NIRS is a reliable method that offers important advantages for the large-scale production of tablets and for non-destructive analysis. NIR spectra of 38 samples (in triplicate) were measured using a Bomen FT-NIR 160 MB in the range 1100-2500nm. Each spectrum was the average of 50 scans obtained in the diffuse reflectance mode. The dissolution test, which was initially carried out in 900mL of 0.1N hydrochloric acid at 37±0.5°C, was used to determine the percentage a drug that dissolved from each tablet measured at the same time interval (45min) at pH 6.8. The measurement of the four API was performed by HPLC (Shimadzu, Japan) in the gradiente mode. The influence of various spectral pretreatments (Savitzky-Golay smoothing, Multiplicative Scatter Correction (MSC), and Savitzky-Golay derivatives) and multivariate analysis using the partial least squares (PLS) regression algorithm was calculated by the Unscrambler 9.8 (Camo) software. The correlation coefficient (R(2)) for the HPLC determination versus predicted values (NIRS) ranged from 0.88 to 0.98. The root-mean-square error of prediction (RMSEP) obtained from PLS models were 9.99%, 8.63%, 8.57% and 9.97% for isoniazid, rifampicin, ethambutol and pyrazinamide, respectively, indicating that the NIR method is an effective and non-destructive tool for measurement of drug dissolution from tablets. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

Security approaches in using tablet computers for primary data collection in clinical research.

Science.gov (United States)

Wilcox, Adam B; Gallagher, Kathleen; Bakken, Suzanne

2013-01-01

Next-generation tablets (iPads and Android tablets) may potentially improve the collection and management of clinical research data. The widespread adoption of tablets, coupled with decreased software and hardware costs, has led to increased consideration of tablets for primary research data collection. When using tablets for the Washington Heights/Inwood Infrastructure for Comparative Effectiveness Research (WICER) project, we found that the devices give rise to inherent security issues associated with the potential use of cloud-based data storage approaches. This paper identifies and describes major security considerations for primary data collection with tablets; proposes a set of architectural strategies for implementing data collection forms with tablet computers; and discusses the security, cost, and workflow of each strategy. The paper briefly reviews the strategies with respect to their implementation for three primary data collection activities for the WICER project.

Immunological comparison of allergen immunotherapy tablet treatment and subcutaneous immunotherapy against grass allergy

DEFF Research Database (Denmark)

Aasbjerg, K; Backer, V; Lund, G

2014-01-01

BACKGROUND: IgE-mediated allergic rhinitis to grass pollen can successfully be treated with either allergen immunotherapy tablets (SLIT tablet) or SQ-standardized subcutaneous immunotherapy (SCIT). The efficacy of these two treatment modalities for grass allergy is comparable, but the immunological...... mechanisms may differ. ClinicalTrials.gov ID: NCT01889875. OBJECTIVES: To compare the immunological changes induced by SQ-standardized SCIT and SLIT tablet. METHODS: We randomized 40 individuals with grass pollen rhinitis into groups receiving SCIT, SLIT tablet, or neither and followed them for 15 months...... differed significantly in both SCIT and SLIT-tablet treatment groups when compared to the control group. Both SCIT and SLIT-tablet groups were significantly different from the control group after 1–3 months of treatment. In general, the changes induced by SCIT reached twice that of SLIT tablet...

Solid-state properties and dissolution behaviour of tablets containing co-amorphous indomethacin-arginine

DEFF Research Database (Denmark)

Lenz, Elisabeth; Jensen, Katrine Birgitte Tarp; Blaabjerg, Lasse Ingerslev

2015-01-01

–arginine in a larger production scale. In this work, a tablet formulation was developed for a co-amorphous salt, namely spray dried indomethacin–arginine (SD IND–ARG). The effects of compaction pressure on tablet properties, physical stability and dissolution profiles under non-sink conditions were examined....... Dissolution profiles of tablets with SD IND–ARG (TAB SD IND–ARG) were compared to those of tablets containing a physical mixture of crystalline IND and ARG (TAB PM IND–ARG) and to the dissolution of pure spray dried powder. Concerning tableting, the developed formulation allowed for the preparation of tablets...... with a broad range of compaction pressures resulting in different porosities and tensile strengths. XRPD results showed that, overall, no crystallization occurred neither during tableting nor during long-term storage. Dissolution profiles of TAB SD IND–ARG showed an immediate release of IND by erosion...

A fixed-dose combination tablet of gemigliptin and metformin sustained release has comparable pharmacodynamic, pharmacokinetic, and tolerability profiles to separate tablets in healthy subjects

Directory of Open Access Journals (Sweden)

Park SI

2015-02-01

Full Text Available Sang-In Park,1,* Howard Lee,1,2,* Jaeseong Oh,1 Kyoung Soo Lim,3 In-Jin Jang,1 Jeong-Ae Kim,4 Jong Hyuk Jung,4 Kyung-Sang Yu1 1Department of Clinical Pharmacology and Therapeutics, Seoul National University College of Medicine and Hospital, Seoul, 2Department of Transdisciplinary Studies, Graduate School of Convergence Science and Technology, Seoul National University, Clinical Trials Center, Seoul National University Hospital, Seoul, 3Department of Clinical Pharmacology and Therapeutics, CHA University School of Medicine and CHA Bundang Medical Center, Seongnam, 4LG Life Sciences, Ltd, Seoul, Republic of Korea *These authors contributed equally to this work Background: In type 2 diabetes mellitus, fixed-dose combination (FDC can provide the complementary benefits of correction of multiple pathophysiologic defects such as dysfunctions in glycemic or metabolic control while improving compliance compared with separate tablets taken together. The objective of the study reported here was to compare the pharmacodynamic (PD, pharmacokinetic (PK, and tolerability profiles of gemigliptin and extended-release metformin (metformin XR between FDC and separate tablets.Methods: A randomized, open-label, single-dose, two-way, two-period, crossover study was conducted in 28 healthy male volunteers. Two FDC tablets of gemigliptin/metformin 25/500 mg or separate tablets of gemigliptin (50 mg ×1 and metformin XR (500 mg ×2 were orally administered in each period. Serial blood samples were collected up to 48 hours post-dose to determine dipeptidyl peptidase 4 (DPP-4 activity using spectrophotometric assay and concentrations of gemigliptin and metformin using tandem mass spectrometry. Geometric mean ratios (GMRs of FDC to separate tablet formulations and their 90% confidence intervals (CIs were calculated to compare the PD and PK parameters between the two formulations. Tolerability was assessed throughout the study.Results: The plasma DPP-4 activity�

Formulation, Characterization and Physicochemical Evaluation of Potassium Citrate Effervescent Tablets

Directory of Open Access Journals (Sweden)

Fatemeh Fattahi

2013-02-01

Full Text Available Purpose: The aim of this study was to design and formulation of potassium citrate effervescent tablet for reduction of calcium oxalate and urate kidney stones in patients suffering from kidney stones. Methods: In this study, 13 formulations were prepared from potassium citrate and effervescent base in different concentration. The flowability of powders and granules was studied. Then effervescent tablets were prepared by direct compression, fusion and wet granulation methods. The prepared tablets were evaluated for hardness, friability, effervescent time, pH, content uniformity. To amend taste of formulations, different flavoring agents were used and then panel test was done by using Latin Square method by 30 volunteers. Results: Formulations obtained from direct compression and fusion methods had good flow but low hardness. Wet granulation improves flowability and other physicochemical properties such as acceptable hardness, effervescence time ≤3 minutes, pH<6, friability < 1%, water percentage < 0.5% and accurate content uniformity. In panel test, both of combination flavors; (orange - lemon and (strawberry - raspberry had good acceptability. Conclusion: The prepared tablets by wet granulation method using PVP solution had more tablet hardness. It is a reproducible process and suitable to produce granules that are compressed into effervescent tablets due to larger agglomerates.

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Tokarský, Jonáš, E-mail: jonas.tokarsky@vsb.cz [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); IT4Innovations Centre of Excellence, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Kulhánková, Lenka [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Neuwirthová, Lucie; Mamulová Kutláková, Kateřina [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Vallová, Silvie [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Stýskala, Vítězslav [Faculty of Electrical Engineering and Computer Science, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Čapková, Pavla [Faculty of Science, University of J.E. Purkyně, České mládeže 8, 400 96 Ústí nad Labem (Czech Republic)

2016-03-15

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

International Nuclear Information System (INIS)

Tokarský, Jonáš; Kulhánková, Lenka; Neuwirthová, Lucie; Mamulová Kutláková, Kateřina; Vallová, Silvie; Stýskala, Vítězslav; Čapková, Pavla

2016-01-01

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

Utilization of date syrup as a tablet binder, comparative study.

Science.gov (United States)

Alanazi, Fars Kaed

2010-04-01

The aim of this study was to investigate the possibility of using dates syrup as a tablet binder. Dates syrup (40%, 50%, 60% w/w dates syrup:water) was utilized for the granulation of sodium bicarbonate and calcium carbonate as examples for water-soluble and water-insoluble materials; correspondingly. Those two materials represent examples of bulky drugs as well. Starch paste (10% w/w starch in water) and sucrose syrup (50% w/w sucrose in water), the well-known tablet binders, were used in the granulation of the same materials for the sake of comparison. The granulations were evaluated with regard to particle size and particle size distribution, granule strength, bulk density, flowability, moisture content and compression behavior. In addition, tablets prepared and evaluated from these granules. Taste and flavor of the prepared tablet have been tested by seven healthy volunteers. Within the scope of this work, dates syrup showed excellent properties as a tablet binder in comparison to starch paste or sucrose syrup for the granulation of both water-soluble and water-insoluble materials. Also, better flavoring and masking taste have been noticed from an evaluation by human volunteers demonstrating the usefulness of the date syrup as sweetener and flavoring the tablets in addition to its use as binder.

Influence of compression forces on tablets disintegration by AC Biosusceptometry.

Science.gov (United States)

Corá, Luciana A; Fonseca, Paulo R; Américo, Madileine F; Oliveira, Ricardo B; Baffa, Oswaldo; Miranda, José Ricardo A

2008-05-01

Analysis of physical phenomena that occurs during tablet disintegration has been studied by several experimental approaches; however none of them satisfactorily describe this process. The aim of this study was to investigate the influence of compression force on the tablets by associating the AC Biosusceptometry with consolidated methods in order to validate the biomagnetic technique as a tool for quality control in pharmaceutical processes. Tablets obtained at five compression levels were submitted to mechanical properties tests. For uncoated tablets, water uptake and disintegration force measurements were performed in order to compare with magnetic data. For coated tablets, magnetic measurements were carried out to establish a relationship between physical parameters of the disintegration process. According to the results, differences between the compression levels were found for water uptake, force development and magnetic area variation measurements. ACB method was able to estimate the disintegration properties as well as the kinetics of disintegration process for uncoated and coated tablets. This study provided a new approach for in vitro investigation and validated this biomagnetic technique as a tool for quality control for pharmaceutical industry. Moreover, using ACB will also be possible to test these parameters in humans allowing to establish an in vitro/in vivo correlation (IVIVC).

A TABLET SCREEN CAST RECEIVER FOR CLASSROOM WITH LOW END ANDROID DEVICES

Directory of Open Access Journals (Sweden)

Moh. Hasbi Assidiqi

2016-07-01

Full Text Available Salah satu aktivitas menggunakan tablet adalah presentasi. Saat ini, kebanyakan aktivitas presentasi dilakukan menggunakan adapter VGA untuk bisa tersambung dengan LCD Proyektor. Konfigurasi ini memungkin presentasi berbasis kabel. Dan ini adalah hal yang menyulitkan penggunaannya untuk perangkat tablet yang memiliki sifat mobilitas tinggi. Beruntung, sudah ada banyak vendor yang menyediakan sistem presentasi yang bersahabat dengan membuatnya menjadi nirkabel. Tapi sistem tersebut hanya mendukung perangkat tablet high end. Pada makalah ini, kami mengajukan sebuah penerima tablet screen cast untuk perangkat tablet android low end. Yang memiliki potensi untuk diimplementasikan di kelas. Dari eksperimen, kami memperoleh hasil 9 FPS dengan delay sebesar 2 detik.

21 CFR 520.2150b - Stanozolol chewable tablets.

Science.gov (United States)

2010-04-01

....2150b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... treatment in dogs. (2) Administered orally to small breeds of dogs, 1/2 to 1 tablet twice daily for several weeks; to large breeds of dogs, 1 to 2 tablets twice daily for several weeks. (3) Federal law restricts...

21 CFR 520.1242b - Levamisole hydrochloride tablet or oblet (bolus).

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Levamisole hydrochloride tablet or oblet (bolus... § 520.1242b Levamisole hydrochloride tablet or oblet (bolus). (a) Chemical name. (-)-2,3,5,6-Tetrahydro... using in severely debilitated animals. (2) It is used in a tablet for sheep as follows: (i) Amount. 0...

Colour Reproduction on Tablet Devices

Directory of Open Access Journals (Sweden)

Vladimir Zorić

2014-07-01

Full Text Available With the advent of Internet and mobile devices client services and other print production are migrating more and more to online platforms. In a recent technology changeover it is obvious that there is growing number of printers as well need from the customers for the print service providers to expand their business to online and mobile platforms. With this technological transition there are some open questions regarding the possibilities of using the tablet devices for colour soft proofing and other colour related operations. As a display devices on a hardware level there are large similarities with the desktop display devices but the operating systems which are driving them are not yet colour smart. There have been some initial attempts to characterize the colour reproduction on this type of devices and find a possibility of using them not just for information content but also for colour managed content. In this study we have tested several tablets (Apple iPad2,Asus Transformer TF101, Samsung Galaxy Tab 1 with different display and OS technology and tested a software which is intended for colour managed viewing of the reproduction. We have measured the colour reproduction of the tablets with the digital version of the GretagMacbeth ColorChecker card and have calculated the colour differences between the colour chart data and the displayed data. We have calibrated the Ipad2 with the only existing colour management tool the Spyder Gallery and we have also tested the chart display with and without the colour correction of the software. We have found that there are differences in the colour reproduction of the display technologies and that the possibilities of a real colour managed workflow has yet to be resolved on the OS level of tablet and mobile devices

Optimization of Premix Powders for Tableting Use.

Science.gov (United States)

Todo, Hiroaki; Sato, Kazuki; Takayama, Kozo; Sugibayashi, Kenji

2018-05-08

Direct compression is a popular choice as it provides the simplest way to prepare the tablet. It can be easily adopted when the active pharmaceutical ingredient (API) is unstable in water or to thermal drying. An optimal formulation of preliminary mixed powders (premix powders) is beneficial if prepared in advance for tableting use. The aim of this study was to find the optimal formulation of the premix powders composed of lactose (LAC), cornstarch (CS), and microcrystalline cellulose (MCC) by using statistical techniques. Based on the "Quality by Design" concept, a (3,3)-simplex lattice design consisting of three components, LAC, CS, and MCC was employed to prepare the model premix powders. Response surface method incorporating a thin-plate spline interpolation (RSM-S) was applied for estimation of the optimum premix powders for tableting use. The effect of tablet shape identified by the surface curvature on the optimization was investigated. The optimum premix powder was effective when the premix was applied to a small quantity of API, although the function of premix was limited in the case of the formulation of large amount of API. Statistical techniques are valuable to exploit new functions of well-known materials such as LAC, CS, and MCC.

Tablet-Based eBooks for Young Children: What Does the Research Say?

OpenAIRE

Reich, SM; Yau, JC; Warschauer, M

2016-01-01

Young children's use of electronic books (eBooks) is increasing as handheld touch screen devices, such as tablets, become increasingly available. Although older children's reading on tablets has been more broadly investigated, less is known about the impacts of digital reading for infant, toddlers, and preschoolers. This review compares the educational affordances of reading on tablets versus print books for young children's learning.A qualitative synthesis of research on tablet-based eReadin...

An Initial Evaluation of Tablet Devices & What Are the Next Steps?

Science.gov (United States)

McKillen, Tracey

2016-01-01

This paper describes an evaluation of tablet devices for a Graduate Entry Medical School (GEMS). The purpose of this evaluation is to assess what type of tablet device could meet the needs of a GEMS student. GEMS requirements for the evaluation include; using the tablet device to replace paper teaching resources in lectures and tutorials and…

Modeling of drug release from multi-unit dosage tablets of theophylline

African Journals Online (AJOL)

To form the multi-unit dose tablets, granules of A and B were mixed together in various proportions in the ratios (A: B) 2:1, 1:1 and 1:2. The disintegration times of the tablets and their dissolution profiles were measured to investigate consistence with the model. The results showed that the tablets generally disintegrated ...

Role of Water Sorption in Tablet Crushing Strength, Disintegration, and Dissolution.

Science.gov (United States)

Sacchetti, M; Teerakapibal, R; Kim, K; Elder, E J

2017-08-01

Drugs formulated as tablets are subjected to accelerated stability conditions with the goal of identifying a stable formulation that will exhibit a sufficiently long shelf life. Water sorption at a condition such as 40°C/75% RH can result in significant changes in tablet properties such as a decrease in dissolution rate, the cause of which may be difficult to interpret, given the complex nature of ingredients and their interactions in a tablet. In this research, three drugs, displaying a wide range of physicochemical properties, were formulated with commonly used diluents, disintegrants, and binders, using a design of experiments approach. The tablets were stored at accelerated conditions and assessed for content, dissolution, disintegration, and crushing strength, as well as other properties. The research demonstrated many water-induced effects in tablet properties. Due to the experimental design approach that revealed many interactions, it was possible to interpret all of the changes observed in tablet crushing strength, disintegration, and dissolution for the drugs using a common set of physical principles. Specifically, the relevant factors considered were (1) mechanical properties of materials, (2) water sorption surface effects in surface diffusion and capillary condensation, (3) water sorption bulk effects for amorphous materials such as viscous flow/spreading, and (4) water-induced stress on interparticle bonding arising from volume expansion. These physical principles enable a comprehensive interpretation of the complex changes observed in tablet properties, which should be valuable in the design of tablet formulations that will be stable to accelerated storage conditions.

Pharmacokinetics of colon-specific pH and time-dependent flurbiprofen tablets.

Science.gov (United States)

Vemula, Sateesh Kumar; Veerareddy, Prabhakar Reddy; Devadasu, Venkat Ratnam

2015-09-01

Present research deals with the development of compression-coated flurbiprofen colon-targeted tablets to retard the drug release in the upper gastro intestinal system, but progressively release the drug in the colon. Flurbiprofen core tablets were prepared by direct compression method and were compression coated using sodium alginate and Eudragit S100. The formulation is optimized based on the in vitro drug release study and further evaluated by X-ray imaging and pharmacokinetic studies in healthy humans for colonic delivery. The optimized formulation showed negligible drug release (4.33 ± 0.06 %) in the initial lag period followed by progressive release (100.78 ± 0.64 %) for 24 h. The X-ray imaging in human volunteers showed that the tablets reached the colon without disintegrating in the upper gastrointestinal tract. The C max of colon-targeted tablets was 12,374.67 ng/ml at T max 10 h, where as in case of immediate release tablets the C max was 15,677.52 ng/ml at T max 3 h, that signifies the ability of compression-coated tablets to target the colon. Development of compression-coated tablets using combination of time-dependent and pH-sensitive approaches was suitable to target the flurbiprofen to colon.

Integrating a Single Tablet PC in Chemistry, Engineering, and Physics Courses

Science.gov (United States)

Rogers, James W.; Cox, James R.

2008-01-01

A tablet PC is a versatile computer that combines the computing power of a notebook with the pen functionality of a PDA (Cox and Rogers 2005b). The authors adopted tablet PC technology in order to improve the process and product of the lecture format in their chemistry, engineering, and physics courses. In this high-tech model, a single tablet PC…

Tablet computer enhanced training improves internal medicine exam performance.

Science.gov (United States)

Baumgart, Daniel C; Wende, Ilja; Grittner, Ulrike

2017-01-01

Traditional teaching concepts in medical education do not take full advantage of current information technology. We aimed to objectively determine the impact of Tablet PC enhanced training on learning experience and MKSAP® (medical knowledge self-assessment program) exam performance. In this single center, prospective, controlled study final year medical students and medical residents doing an inpatient service rotation were alternatingly assigned to either the active test (Tablet PC with custom multimedia education software package) or traditional education (control) group, respectively. All completed an extensive questionnaire to collect their socio-demographic data, evaluate educational status, computer affinity and skills, problem solving, eLearning knowledge and self-rated medical knowledge. Both groups were MKSAP® tested at the beginning and the end of their rotation. The MKSAP® score at the final exam was the primary endpoint. Data of 55 (tablet n = 24, controls n = 31) male 36.4%, median age 28 years, 65.5% students, were evaluable. The mean MKSAP® score improved in the tablet PC (score Δ + 8 SD: 11), but not the control group (score Δ- 7, SD: 11), respectively. After adjustment for baseline score and confounders the Tablet PC group showed on average 11% better MKSAP® test results compared to the control group (plearning to their respective training programs.

Cladribine tablets for relapsing-remitting multiple sclerosis

DEFF Research Database (Denmark)

Rammohan, Kottil; Giovannoni, Gavin; Comi, Giancarlo

2012-01-01

BACKGROUND: In the phase III CLARITY study, treatment with cladribine tablets at cumulative doses of 3.5 or 5.25mg/kg over 96 weeks led to significant reductions in annualized relapse rates (ARR) versus placebo in patients with relapsing-remitting multiple sclerosis. Further post hoc analyses...... of CLARITY study data were conducted to determine the efficacy of cladribine tablets across patient subgroups stratified by baseline characteristics. METHODS: Relapse rates over the 96-week CLARITY study were analyzed in cohorts stratified by demographics; disease duration; treatment history and disease...... activity at baseline. RESULTS: In the intent-to-treat population (n=437, 433 and 456 in the placebo, cladribine 3.5 and 5.25mg/kg groups, respectively), treatment with cladribine tablets 3.5 and 5.25mg/kg led to consistent improvements in ARR versus placebo in patients stratified by gender; age (≤40...

Risperidone oral disintegrating mini-tablets: A robust-product for pediatrics

Directory of Open Access Journals (Sweden)

El-Say Khalid M.

2015-12-01

Full Text Available This study was aimed at developing risperidone oral disintegrating mini-tablets (OD-mini-tablets as age-appropriate formulations and to assess their suitability for infants and pediatric use. An experimental Box-Behnken design was applied to assure high quality of the OD-mini-tablets and reduce product variability. The design was employed to understand the influence of the critical excipient combinations on the production of OD-mini-tablets and thus guarantee the feasibility of obtaining products with dosage form uniformity. The variables selected were mannitol percent in Avicel (X1, swelling pressure of the superdisintegrant (X2, and the surface area of Aerosil as a glidant (X3. Risperidone-excipient compatibilities were investigated using FTIR and the spectra did not display any interaction. Fifteen formulations were prepared and evaluated for preand post-compression characteristics. The prepared ODmini- tablet batches were also assessed for disintegration in simulated salivary fluid (SSF, pH 6.2 and in reconstituted skimmed milk. The optimized formula fulfilled the requirements for crushing strength of 5 kN with minimal friability, disintegration times of 8.4 and 53.7 s in SSF and skimmed milk, respectively. This study therefore proposes the risperidone OD-mini-tablet formula having robust mechanical properties, uniform and precise dosing of medication with short disintegration time suitable for pediatric use.

Risperidone oral disintegrating mini-tablets: A robust-product for pediatrics.

Science.gov (United States)

El-Say, Khalid M; Ahmed, Tarek A; Abdelbary, Maged F; Ali, Bahaa E; Aljaeid, Bader M; Zidan, Ahmed S

2015-12-01

This study was aimed at developing risperidone oral disintegrating mini-tablets (OD-mini-tablets) as age-appropriate formulations and to assess their suitability for infants and pediatric use. An experimental Box-Behnken design was applied to assure high quality of the OD-mini-tablets and reduce product variability. The design was employed to understand the influence of the critical excipient combinations on the production of OD-mini-tablets and thus guarantee the feasibility of obtaining products with dosage form uniformity. The variables selected were mannitol percent in Avicel (X1), swelling pressure of the superdisintegrant (X2), and the surface area of Aerosil as a glidant (X3). Risperidone-excipient compatibilities were investigated using FTIR and the spectra did not display any interaction. Fifteen formulations were prepared and evaluated for pre- and post-compression characteristics. The prepared OD-mini-tablet batches were also assessed for disintegration in simulated salivary fluid (SSF, pH 6.2) and in reconstituted skimmed milk. The optimized formula fulfilled the requirements for crushing strength of 5 kN with minimal friability, disintegration times of 8.4 and 53.7 s in SSF and skimmed milk, respectively. This study therefore proposes the risperidone OD-mini-tablet formula having robust mechanical properties, uniform and precise dosing of medication with short disintegration time suitable for pediatric use.

Desktop 3D printing of controlled release pharmaceutical bilayer tablets.

Science.gov (United States)

Khaled, Shaban A; Burley, Jonathan C; Alexander, Morgan R; Roberts, Clive J

2014-01-30

Three dimensional (3D) printing was used as a novel medicine formulation technique for production of viable tablets capable of satisfying regulatory tests and matching the release of standard commercial tablets. Hydroxypropyl methylcellulose (HPMC 2208) (Methocel™ K100M Premium) and poly(acrylic acid) (PAA) (Carbopol(®) 974P NF) were used as a hydrophilic matrix for a sustained release (SR) layer. Hypromellose(®) (HPMC 2910) was used as a binder while microcrystalline cellulose (MCC) (Pharmacel(®) 102) and sodium starch glycolate (SSG) (Primojel(®)) were used as disintegrants for an immediate release (IR) layer. Commercial guaifenesin bi-layer tablets (GBT) were used as a model drug (Mucinex(®)) for this study. There was a favourable comparison of release of the active guaifenesin from the printed hydrophilic matrix compared with the commercially available GBT. The printed formulations were also evaluated for physical and mechanical properties such as weight variation, friability, hardness and thickness as a comparison to the commercial tablet and were within acceptable range as defined by the international standards stated in the United States Pharmacopoeia (USP). All formulations (standard tablets and 3D printed tablets) showed Korsmeyer-Peppas n values between 0.27 and 0.44 which indicates Fickian diffusion drug release through a hydrated HPMC gel layer. Copyright © 2013 Elsevier B.V. All rights reserved.

Smartphones, tablets and mobile applications for radiology.

Science.gov (United States)

Székely, András; Talanow, Roland; Bágyi, Péter

2013-05-01

Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or "tablet PCs" are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for diagnostic reading, reference, learning, consultation, and for

Smartphones, tablets and mobile applications for radiology

Energy Technology Data Exchange (ETDEWEB)

Székely, András, E-mail: andras.szekely@gmail.com [Kenézy Hospital Department of Radiology, 4043 Debrecen, Bartók Béla út 2-26 (Hungary); Talanow, Roland, E-mail: roland@talanow.info [P.O. Box 1570, Lincoln, CA 95648 (United States); Bágyi, Péter [Kenézy Hospital Department of Radiology, 4043 Debrecen, Bartók Béla út 2-26 (Hungary)

2013-05-15

Background: Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or “tablet PCs” are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. Materials and methods: A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. Results: We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Conclusion: Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for

Smartphones, tablets and mobile applications for radiology

International Nuclear Information System (INIS)

Székely, András; Talanow, Roland; Bágyi, Péter

2013-01-01

Background: Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or “tablet PCs” are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. Materials and methods: A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. Results: We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Conclusion: Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for

Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets.

Science.gov (United States)

Zhang, Jiaxiang; Feng, Xin; Patil, Hemlata; Tiwari, Roshan V; Repka, Michael A

2017-03-15

The main objective of this work was to explore the potential of coupling fused deposition modeling in three-dimensional (3D) printing with hot-melt extrusion (HME) technology to facilitate additive manufacturing, in order to fabricate tablets with enhanced extended release properties. Acetaminophen was used as the model drug and different grades and ratios of polymers were used to formulate tablets. Three-point bending and hardness tests were performed to determine the mechanical properties of the filaments and tablets. 3D-printed tablets, directly compressed mill-extruded tablets, and tablets prepared from a physical mixture were evaluated for drug release rates using a USP-II dissolution apparatus. The surface and cross-sectional morphology of the 3D-printed tablets were assessed by scanning electron microscopy. Differential scanning calorimetry and thermogravimetric analysis were used to characterize the crystal states and thermal properties of materials, respectively. The 3D-printed tablets had smooth surfaces and tight structures; therefore, they showed better extended drug release rates than the directly compressed tablets did. Further, this study clearly demonstrated the feasibility of coupling HME with 3D printing technology, which allows for the formulation of drug delivery systems using different grades and ratios of pharmaceutical polymers. In addition, formulations can be made based on the personal needs of patients. Copyright © 2016 Elsevier B.V. All rights reserved.

Supporting Tablet Configuration, Tracking, and Infection Control Practices in Digital Health Interventions: Study Protocol.

Science.gov (United States)

Furberg, Robert D; Ortiz, Alexa M; Zulkiewicz, Brittany A; Hudson, Jordan P; Taylor, Olivia M; Lewis, Megan A

2016-06-27

Tablet-based health care interventions have the potential to encourage patient care in a timelier manner, allow physicians convenient access to patient records, and provide an improved method for patient education. However, along with the continued adoption of tablet technologies, there is a concomitant need to develop protocols focusing on the configuration, management, and maintenance of these devices within the health care setting to support the conduct of clinical research. Develop three protocols to support tablet configuration, tablet management, and tablet maintenance. The Configurator software, Tile technology, and current infection control recommendations were employed to develop three distinct protocols for tablet-based digital health interventions. Configurator is a mobile device management software specifically for iPhone operating system (iOS) devices. The capabilities and current applications of Configurator were reviewed and used to develop the protocol to support device configuration. Tile is a tracking tag associated with a free mobile app available for iOS and Android devices. The features associated with Tile were evaluated and used to develop the Tile protocol to support tablet management. Furthermore, current recommendations on preventing health care-related infections were reviewed to develop the infection control protocol to support tablet maintenance. This article provides three protocols: the Configurator protocol, the Tile protocol, and the infection control protocol. These protocols can help to ensure consistent implementation of tablet-based interventions, enhance fidelity when employing tablets for research purposes, and serve as a guide for tablet deployments within clinical settings.

Evaluating tablet computers as a survey tool in rural communities.

Science.gov (United States)

Newell, Steve M; Logan, Henrietta L; Guo, Yi; Marks, John G; Shepperd, James A

2015-01-01

Although tablet computers offer advantages in data collection over traditional paper-and-pencil methods, little research has examined whether the 2 formats yield similar responses, especially with underserved populations. We compared the 2 survey formats and tested whether participants' responses to common health questionnaires or perceptions of usability differed by survey format. We also tested whether we could replicate established paper-and-pencil findings via tablet computer. We recruited a sample of low-income community members living in the rural southern United States. Participants were 170 residents (black = 49%; white = 36%; other races and missing data = 15%) drawn from 2 counties meeting Florida's state statutory definition of rural with 100 persons or fewer per square mile. We randomly assigned participants to complete scales (Center for Epidemiologic Studies Depression Inventory and Regulatory Focus Questionnaire) along with survey format usability ratings via paper-and-pencil or tablet computer. All participants rated a series of previously validated posters using a tablet computer. Finally, participants completed comparisons of the survey formats and reported survey format preferences. Participants preferred using the tablet computer and showed no significant differences between formats in mean responses, scale reliabilities, or in participants' usability ratings. Overall, participants reported similar scales responses and usability ratings between formats. However, participants reported both preferring and enjoying responding via tablet computer more. Collectively, these findings are among the first data to show that tablet computers represent a suitable substitute among an underrepresented rural sample for paper-and-pencil methodology in survey research. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Clinical effects of CG (Hythiol) tablets on leukopenia resulting from radiotherapy

International Nuclear Information System (INIS)

Fukui, Hideki; Sakaguchi, Kokichi; Sekiba, Kaoru

1984-01-01

A double-blind comparative study of CG(L-cysteine) tablets and approved drugs (CG capsules) was made to assess clinical effects of CG tablets on leukopenia. The subjects were 75 patients with cancer of the uterine cervix in whom the number of WBC was 4,500-7,500/mm before irradiation. The ratios of patients who kept WBC as 3,500/mm or more were 64.7% in the group with CG tablets and 50% in the group with CG capsules with no statistical significance. The ratios of patients who kept WBC as 3,000/mm or more were 82.4% in the group with CG tablets and 79.4% in the group with CG capsules with no statistical significance. The ratios to prevent leukopenia were 70.6% in the group with CG tablets and 58.8% in the group with CG capsules with no significant difference. Other hematological findings, subjective symptoms and the performance of radiotherapeutic protocol were not different between the groups. No marked side effects were observed. These results suggest that CG tablets, as well as CG capsules, are effective for preventing leukopenia resulting from radiotherapy. (Namekawa, K.)

The practice and clinical implications of tablet splitting in international health

Science.gov (United States)

Elliott, Ivo; Mayxay, Mayfong; Yeuichaixong, Sengchanh; Lee, Sue J; Newton, Paul N

2014-01-01

Objective Tablet splitting is frequently performed to facilitate correct dosing, but the practice and implications in low-income settings have rarely been discussed. Methods We selected eight drugs, with narrow therapeutic indices or critical dosages, frequently divided in the Lao PDR (Laos). These were split, by common techniques used in Laos, by four nurses and four laypersons. The mean percentage deviation from the theoretical expected weight and weight loss of divided tablets/capsules were recorded. Results Five of eight study drugs failed, on splitting, to meet European Pharmacopoeia recommendations for tablet weight deviation from the expected weight of tablet/capsule halves with 10% deviating by more than 25%. There was a significant difference in splitting accuracy between nurses and laypersons (P = 0.027). Coated and unscored tablets were less accurately split than uncoated (P = 0.03 and 0.0019 for each half) and scored (0.0001 for both halves) tablets. Conclusion These findings have potential clinical implications on treatment outcome and the development of antimicrobial resistance. Investment by drug companies in a wider range of dosage units, particularly for narrow therapeutic index and critical dosage medicines, is strongly recommended. PMID:24702766

Optimized furosemide taste masked orally disintegrating tablets

Directory of Open Access Journals (Sweden)

Mohamed Abbas Ibrahim

2017-11-01

Full Text Available Optimized orally disintegrating tablets (ODTs containing furosemide (FUR were prepared by direct compression method. Two factors, three levels (32 full factorial design was used to optimize the effect of taste masking agent (Eudragit E100; X1 and superdisintegarant; croscarmellose sodium (CCS; X2 on tablet properties. A composite was prepared by mixing ethanolic solution of FUR and Eudragit E100 with mannitol prior to mixing with other tablet ingredients. The prepared ODTs were characterized for their FUR content, hardness, friability and wetting time. The optimized ODT formulation (F1 was evaluated in term of palatability parameters and the in vivo disintegration. The manufactured ODTs were complying with the pharmacopeia guidelines regarding hardness, friability, weight variation and content. Eudragit E100 had a very slightly enhancing effect on tablets disintegration. However, the effects of both Eudragit E100 (X1 and CCS (X2 on ODTs disintegration time (Y1 were insignificant (p > 0.05. Moreover, X1 exhibited antagonistic effect on the dissolution after 5 and 30 min (D5 and D30, respectively, but only its effect on D30 is significant (p = 0.0004. Furthermore, the optimized ODTs formula showed good to acceptable taste in term of palatability, and in vivo disintegration time of this formula was about 10 s.

Life-Span Differences in the Uses and Gratifications of Tablets: Implications for Older Adults

Science.gov (United States)

Magsamen-Conrad, Kate; Dowd, John; Abuljadail, Mohammad; Alsulaiman, Saud; Shareefi, Adnan

2015-01-01

This study extends Uses and Gratifications theory by examining the uses and gratifications of a new technological device, the tablet computer, and investigating the differential uses and gratifications of tablet computers across the life-span. First, we utilized a six-week tablet training intervention to adapt and extend existing measures to the tablet as a technological device. Next, we used paper-based and online surveys (N=847), we confirmed four main uses of tablets: 1) Information Seeking, 2) Relationship Maintenance, 3) Style, 4) Amusement and Killing time, and added one additional use category 5) Organization. We discovered differences among the five main uses of tablets across the life-span, with older adults using tablets the least overall. Builders, Boomers, GenX and GenY all reported the highest means for information seeking. Finally, we used a structural equation model to examine how uses and gratifications predicts hours of tablet use. The study provides limitations and suggestions for future research and marketers. In particular, this study offers insight to the relevancy of theory as it applies to particular information and communication technologies and consideration of how different periods in the life-span affect tablet motivations. PMID:26113769

Life-Span Differences in the Uses and Gratifications of Tablets: Implications for Older Adults.

Science.gov (United States)

Magsamen-Conrad, Kate; Dowd, John; Abuljadail, Mohammad; Alsulaiman, Saud; Shareefi, Adnan

2015-11-01

This study extends Uses and Gratifications theory by examining the uses and gratifications of a new technological device, the tablet computer, and investigating the differential uses and gratifications of tablet computers across the life-span. First, we utilized a six-week tablet training intervention to adapt and extend existing measures to the tablet as a technological device. Next, we used paper-based and online surveys ( N =847), we confirmed four main uses of tablets: 1) Information Seeking, 2) Relationship Maintenance, 3) Style, 4) Amusement and Killing time, and added one additional use category 5) Organization. We discovered differences among the five main uses of tablets across the life-span, with older adults using tablets the least overall. Builders, Boomers, GenX and GenY all reported the highest means for information seeking. Finally, we used a structural equation model to examine how uses and gratifications predicts hours of tablet use. The study provides limitations and suggestions for future research and marketers. In particular, this study offers insight to the relevancy of theory as it applies to particular information and communication technologies and consideration of how different periods in the life-span affect tablet motivations.

Life-Span Differences in the Uses and Gratifications of Tablets: Implications for Older Adults

OpenAIRE

Magsamen-Conrad, Kate; Dowd, John; Abuljadail, Mohammad; Alsulaiman, Saud; Shareefi, Adnan

2015-01-01

This study extends Uses and Gratifications theory by examining the uses and gratifications of a new technological device, the tablet computer, and investigating the differential uses and gratifications of tablet computers across the life-span. First, we utilized a six-week tablet training intervention to adapt and extend existing measures to the tablet as a technological device. Next, we used paper-based and online surveys (N=847), we confirmed four main uses of tablets: 1) Information Seekin...

Investigating the effect of processing parameters on pharmaceutical tablet disintegration using a real-time particle imaging approach.

Science.gov (United States)

Rajkumar, Arthi D; Reynolds, Gavin K; Wilson, David; Wren, Stephen; Hounslow, Michael J; Salman, Agba D

2016-09-01

Tablet disintegration is a fundamental parameter that is tested in vitro before a product is released to the market, to give confidence that the tablet will break up in vivo and that active drug will be available for absorption. Variations in tablet properties cause variation in disintegration behaviour. While the standardised pharmacopeial disintegration test can show differences in the speed of disintegration of different tablets, it does not give any mechanistic information about the underlying cause of the difference. With quantifiable disintegration data, and consequently an improved understanding into tablet disintegration, a more knowledge-based approach could be applied to the research and development of future tablet formulations. The aim of the present research was to introduce an alternative method which will enable a better understanding of tablet disintegration using a particle imaging approach. A purpose-built flow cell was employed capable of online observation of tablet disintegration, which can provide information about the changing tablet dimensions and the particles released with time. This additional information can improve the understanding of how different materials and process parameters affect tablet disintegration. Standard USP analysis was also carried out to evaluate and determine whether the flow cell method can suitably differentiate the disintegration behaviour of tablets produced using different processing parameters. Placebo tablets were produced with varying ratios of insoluble and soluble filler (mannitol and MCC, respectively) so that the effect of variation in the formulation can be investigated. To determine the effect of the stress applied during granulation and tableting on tablet disintegration behaviour, analysis was carried out on tablets produced using granular material compressed at 20 or 50bar, where a tableting load of either 15 or 25kN was used. By doing this the tablet disintegration was examined in terms of the

Tablet PC interaction with digital micromirror device (DMD)

Science.gov (United States)

Refai, Hakki H.; Dahshan, Mostafa H.; Sluss, James J., Jr.

2007-02-01

Digital light processing (DLP) is an innovative display technology that uses an optical switch array, known as a digital micromirror device (DMD), which allows digital control of light. To date, DMDs have been used primarily as high-speed spatial light modulators for projector applications. A tablet PC is a notebook or slate-shaped mobile PC. Its touch screen or digitizing tablet technology allows the user to operate the notebook with a stylus or digital pen instead of using a keyboard or mouse. In this paper, we describe an interface solution that translates any sketch on the tablet PC screen to an identical mirror-copy over the cross-section of the DMD micromirrors such that the image of the sketch can be projected onto a special screen. An algorithm has been created to control each single micromirror of the hundreds of thousands of micromirrors that cover the DMD surface. We demonstrate the successful application of a DMD to a high-speed two-dimensional (2D) scanning environment, acquiring the data from the tablet screen and launching its contents to the projection screen; with very high accuracy up to 13.68 μm x 13.68 μm of mirror pitch.

Development and evaluation of novel antihypertensive orodispersible tablets.

Science.gov (United States)

Khan, Hafeez Ullah; Hanif, Muhammad; Sarfraz, Rai M; Maheen, Safirah; Afzal, Samina; Sher, Muhammad; Afzal, Khurram; Mahmood, Asif; Shamim, Ayesha

2017-09-01

Objective of present study was to enhance patient compliance in pediatrics and geriatrics patients of Hypertension. To achieve this target, innovative orodispersible tablets of atenolol and atorvastatin was developed to produce instant action by rapidly disintegrating into oral cavity. Three different techniques like direct compression, effervescent and sublimation methods were used to prepare these tablets (Five batches of tablets by each method) by using two superdisintegrants like Sodium starch glycolate and pregelatinized starch alone and in combination. Pre-formulation studies including rheological analysis (Bulk density, tapped density, Angle of repose, Carr's compressibility index, Hausner's ratio), compatibility studies such as Fourier transform infrared spectrophotometry (FTIR) and Differential scanning colorimetry (DSC), Post-compression and stability studies were also performed. Finally, results were statistically evaluated by the applying one way ANOVA test and mean. It was concluded that the formulation F8 containing Sodium starch glycolate 2% and pregelatinized starch 6% found best regarding disintegration time, wetting volume, wetting time, release studies etc. The order in which drug release was quicker is Pregelatinized starch plus Sodium starch glycolate > Pregelatinized starch > Sodium starch glycolate (primojel). It was concluded that sublimation method was the best among three methods used for orodispersible tablets formulations.

Comparative photostability study of Fancimef tablet and its active ...

African Journals Online (AJOL)

Fancimef tablet is one of the multi-component drugs recently introduced into malaria therapy to combat the resistant strains of Plasmodium parasite. Like most complex organic compounds, it is expected that the organic compounds in Fancimef tablet will absorb light spectra leading to its photodecomposition and all its ...

Tablet Computer Literacy Levels of the Physical Education and Sports Department Students

Science.gov (United States)

Hergüner, Gülten

2016-01-01

Education systems are being affected in parallel by newly emerging hardware and new developments occurring in technology daily. Tablet usage especially is becoming ubiquitous in the teaching-learning processes in recent years. Therefore, using the tablets effectively, managing them and having a high level of tablet literacy play an important role…

78 FR 1247 - Certain Electronic Devices, Including Wireless Communication Devices, Tablet Computers, Media...

Science.gov (United States)

2013-01-08

... Wireless Communication Devices, Tablet Computers, Media Players, and Televisions, and Components Thereof... devices, including wireless communication devices, tablet computers, media players, and televisions, and... wireless communication devices, tablet computers, media players, and televisions, and components thereof...

Prescription Tablets in the Digital Age: A Cross-Sectional Study Exploring Patient and Physician Attitudes Toward the Use of Tablets for Clinic-Based Personalized Health Care Information Exchange.

Science.gov (United States)

Patel, Vishal; Hale, Timothy M; Palakodeti, Sandeep; Kvedar, Joseph C; Jethwani, Kamal

2015-10-19

To reduce the cost of health care while increasing efficiency and quality, health systems are seeking innovative means to engage and empower patients. Improved use of information technology and electronic health record (EHR) infrastructure is essential, and required for "meaningful use" as mandated by the federal government. Providing personalized health information using tablets at the point of care could enhance the clinical experience and enable efficient collection of patient reported outcome measures to guide clinical decision making. The aim of this study is to explore patient and provider attitudes and interest in a proposed clinic-based tablet system for personal health information exchange. To provide a context to understand patients' use of tablets during their clinic visit, we also examine patients' current activities and time spent in the waiting room, and their use of health information resources. Surveys were administered to 84 patients in the waiting room of a community health center affiliated with Massachusetts General Hospital (MGH) in Boston, MA. This survey included a vignette and illustration describing a proposed tablet-based system in which the patient, upon sign in at the clinic, receives a tablet loaded with personalized information tailored to their specific medical conditions and preferences. Patients were queried about their interest in such a system in comparison to traditional forms of patient education as well as their current health information seeking behaviors and activities and time spent in the waiting room. Interviews with five MGH-affiliated health care providers were conducted to assess their opinions regarding the proposed tablet system. The majority (>60%) of patients were "very" or "extremely" interested in the proposed tablet system and thought it would improve their knowledge about their medical condition (60%), assist them in making healthy choices (57%), and help them to feel more comfortable talking with their provider

High-throughput prediction of tablet weight and trimethoprim content of compound sulfamethoxazole tablets for controlling the uniformity of dosage units by NIR.

Science.gov (United States)

Dong, Yanhong; Li, Juan; Zhong, Xiaoxiao; Cao, Liya; Luo, Yang; Fan, Qi

2016-04-15

This paper establishes a novel method to simultaneously predict the tablet weight (TW) and trimethoprim (TMP) content of compound sulfamethoxazole tablets (SMZCO) by near infrared (NIR) spectroscopy with partial least squares (PLS) regression for controlling the uniformity of dosage units (UODU). The NIR spectra for 257 samples were measured using the optimized parameter values and pretreated using the optimized chemometric techniques. After the outliers were ignored, two PLS models for predicting TW and TMP content were respectively established by using the selected spectral sub-ranges and the reference values. The TW model reaches the correlation coefficient of calibration (R(c)) 0.9543 and the TMP content model has the R(c) 0.9205. The experimental results indicate that this strategy expands the NIR application in controlling UODU, especially in the high-throughput and rapid analysis of TWs and contents of the compound pharmaceutical tablets, and may be an important complement to the common NIR on-line analytical method for pharmaceutical tablets. Copyright © 2016 Elsevier B.V. All rights reserved.

Process analytical technology to understand the disintegration behavior of alendronate sodium tablets.

Science.gov (United States)

Xu, Xiaoming; Gupta, Abhay; Sayeed, Vilayat A; Khan, Mansoor A

2013-05-01

Various adverse events including esophagus irritations have been reported with the use of alendronate tablets, likely attributed to the rapid tablet disintegration in the mouth or esophagus. Accordingly, the disintegration of six alendronate tablet drug products was studied using a newly developed testing device equipped with in-line sensors, in addition to the official compendial procedure for measuring the disintegration time. The in-line sensors were used to monitor the particle count and solution pH change to assess the onset and duration of disintegration. A relatively large variation was observed in the disintegration time of the tested drug products using the compendial method. The data collected using the in-line sensors suggested that all tested drug products exhibited almost instantaneous onset of disintegration, under 2 s, and a sharp drop in solution pH. The drop in pH was slower for tablets with slower disintegration. The in-house prepared alendronate test tablets also showed similar trends suggesting rapid solubilization of the drug contributed to the fast tablet disintegration. This research highlights the usefulness of the newly developed in-line analytical method in combination with the compendial method in providing a better understanding of the disintegration and the accompanying drug solubilization processes for fast disintegrating tablet drug products. Copyright © 2013 Wiley Periodicals, Inc.

Using tablets to support self-regulated learning in a longitudinal integrated clerkship

Directory of Open Access Journals (Sweden)

Dylan Archbold Hufty Alegría

2014-03-01

Full Text Available Introduction: The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. Methods: We provided 15 LIC students with tablet computers with access to the electronic health record (EHR, to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Results: Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. Conclusions: LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students’ ability to develop and employ self-regulatory skills in a clinical context.

Using tablets to support self-regulated learning in a longitudinal integrated clerkship.

Science.gov (United States)

Alegría, Dylan Archbold Hufty; Boscardin, Christy; Poncelet, Ann; Mayfield, Chandler; Wamsley, Maria

2014-01-01

The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs) require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. We provided 15 LIC students with tablet computers with access to the electronic health record (EHR), to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students' ability to develop and employ self-regulatory skills in a clinical context.

Using tablets to support self-regulated learning in a longitudinal integrated clerkship

Science.gov (United States)

Alegría, Dylan Archbold Hufty; Boscardin, Christy; Poncelet, Ann; Mayfield, Chandler; Wamsley, Maria

2014-01-01

Introduction The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs) require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. Methods We provided 15 LIC students with tablet computers with access to the electronic health record (EHR), to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Results Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. Conclusions LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students’ ability to develop and employ self-regulatory skills in a clinical context. PMID:24646438

UJI DISOLUSI DAN PENETAPAN KADAR TABLET LORATADIN INOVATOR DAN GENERIK BERMEREK

Directory of Open Access Journals (Sweden)

Mariana Raini

2012-09-01

Full Text Available Antihistamines Loratadin available in tablet form, as loratadin tablets innovator, branded generic preparations. Socializing generic drugs need information about quality of these drugs, to ensure that the quality of generic drugs not lower or similar to its innovator drugs. The impact of economic crisis caused the price of very expensive drugs. The information quality of generic drugs is expected to increase the use of generic drugs by health practitioners and public. It is necessary for the laboratory data that are qualityparameters, such as dissolution profiles, dissolution testing and determinationof drug dosage levels. Dissolution test method anddetermination of levelsconducted in accordanceto the requirements of the USP (United State of Pharmacopeia. Loratadin dissolution test resultsof tablets A, B and Cin accordancewith the requirements of the USP. Loratadin contentin tablet Ais 103, 73%, B=99,62% and C=100,21%. Loratadin levels in all of these tablets meet the requirements of the USP.   Key words: innovator,branded generic drug, dissolution, content

Tablet disintegration studied by high-resolution real-time magnetic resonance imaging.

Science.gov (United States)

Quodbach, Julian; Moussavi, Amir; Tammer, Roland; Frahm, Jens; Kleinebudde, Peter

2014-01-01

The present work employs recent advances in high-resolution real-time magnetic resonance imaging (MRI) to investigate the disintegration process of tablets containing disintegrants. A temporal resolution of 75 ms and a spatial resolution of 80 × 80 µm with a section thickness of only 600 µm were achieved. The histograms of MRI videos were quantitatively analyzed with MATLAB. The mechanisms of action of six commercially available disintegrants, the influence of relative tablet density, and the impact of disintegrant concentration were examined. Crospovidone seems to be the only disintegrant acting by a shape memory effect, whereas the others mainly swell. A higher relative density of tablets containing croscarmellose sodium leads to a more even distribution of water within the tablet matrix but hardly impacts the disintegration kinetics. Increasing the polacrilin potassium disintegrant concentration leads to a quicker and more thorough disintegration process. Real-time MRI emerges as valuable tool to visualize and investigate the process of tablet disintegration.

Evaluation of some anionic exchange resins as potential tablet ...

African Journals Online (AJOL)

The effect of resin concentration and compression force on the properties of tablets using the selected resin was investigated. In addition, the disintegrant efficacy of the selected resin in the tablet formulations containing either a basic drug, e.g., dextromethorphan hydrobromide (DMP), or an acidic drug, e.g., diclofenac ...

Quantitative measurements of localized density variations in cylindrical tablets using X-ray microtomography.

Science.gov (United States)

Busignies, Virginie; Leclerc, Bernard; Porion, Patrice; Evesque, Pierre; Couarraze, Guy; Tchoreloff, Pierre

2006-08-01

Direct compaction is a complex process that results in a density distribution inside the tablets which is often heterogeneous. Therefore, the density variations may affect the compact properties. A quantitative analysis of this phenomenon is still lacking. Recently, X-ray microtomography has been successfully used in pharmaceutical development to study qualitatively the impact of tablet shape and break-line in the density of pharmaceutical tablets. In this study, we evaluate the density profile in microcrystalline cellulose (Vivapur 12) compacts obtained at different mean porosity (ranging from 7.7% to 33.5%) using X-ray tomography technique. First, the validity of the Beer-Lambert law is studied. Then, density calibration is performed and density maps of cylindrical tablets are obtained and visualized using a process with colour-scale calibration plot which is explained. As expected, important heterogeneity in density is observed and quantified. The higher densities in peripheral region were particularly investigated and appraised in regard to the lower densities observed in the middle of the tablet. The results also underlined that in the case of pharmaceutical tablets, it is important to differentiate the mechanical properties representative of the total volume tablet and the mechanical properties that only characterize the tablet surface like the Brinell hardness measurements.

Exploring the use of tablet PCs in veterinary medical education: opportunity or obstacle?

Science.gov (United States)

Wang, Hong; Rush, Bonnie R; Wilkerson, Melinda; van der Merwe, Deon

2014-01-01

A tablet PC is a laptop computer with a touch screen and a digital pen or stylus that can be used for handwritten notes and drawings. The use of tablet PCs has been investigated in many disciplines such as engineering, mathematics, science, and education. The purpose of this article is to explore student and faculty attitudes toward and experiences with tablet PCs 6 years after the implementation of a tablet PC program in the College of Veterinary Medicine (CVM) at Kansas State University (K-State). This study reports that the use of tablet PCs has enhanced students' learning experiences through learner-interface interaction, learner-content interaction, learner-instructor interaction, and learner-learner interaction. This study also identifies digital distraction as the major negative experience with tablet PCs during class time. The tablet PC program provides CVM faculty the potential to pursue technology integration strategies that support expected learning outcomes and provides students the potential to develop self-monitoring and self-discipline skills that support learning with digital technologies.

Formulation of Peperomia pellucida (L Kunth extract tablet by modified filler

Directory of Open Access Journals (Sweden)

Nanang Yunarto

2013-07-01

Full Text Available AbstrakLatar belakang: Peperomia pelusida telah banyak digunakan dalam pengobatan tradisional. Pada saat ini, bentuk-bentuk yang ada masih konvensional seperti jus dan infusum, karena itu, perlu dirumuskan lebih praktis dan berat seragam seperti bentuk tablet. Tujuan dari penelitian ini adalah untuk mendapatkan formula optimum pelusida tablet ekstrak P. pellucida. Metode: P. pelusida ekstrak tablet yang diproduksi dengan variasi selulosa mikrokristalin (MCC PH 101 - laktosa dengan metode granulasi basah dalam tiga formula, formula I (100% MCC PH 101, II (laktosa 100%, dan III (MCC PH 101: laktosa = 50%: 50%. Butiran dievaluasi karakteristik fisik termasuk laju aliran, penyerapan air, dan kompaktibilitas untuk mendapatkan formula optimum dengan menggunakan desain simplex lattice dan jumlah respon. Formula yang digunakan untuk membuat tablet dan diuji karakteristik fisik (keseragaman bobot, kekerasan, dan kerapuhan dan waktu hancur. Hasil: Laktosa secara signifikan dipengaruhi oleh laju alirannya, sedangkan MCC PH 101 - laktosa dengan metode granulasi basah dalam tiga formula, formula I (100% MCC PH 10PH 101 dipengaruhi penyerapan kompaktibilitas dan air. Berdasarkan karakteristik fisik granul dan jumlah responsnya, kombinasi formula MCC PH 101 80% dan laktosa 20% dapat disimpulkan menjadi yang paling optimal untuk tablet filler. Formula tablet ini yang memiliki karakteristik fisik terbaik dengan berat 620,84 ± 1,04 mg, kekerasan 8,54 ± 0,68 kg, kerapuhan 0,26% ± 0,04 dan waktu hancur 4,58 ± 0,17 menit.Kesimpulan: Proporsi MCC PH 101 80% dan laktosa 20% merupakan formula optimum terbaik dan memenuhi persyaratan karakteristik fisik tablet. (Health Science Indones 2013;1:32-6 Key words: formulasi, extract P. pellucida, optimalAbstractBackground: Peperomia pellucida has been widely used in traditional medicine. Recently, its existing forms are still conventional such as juice and infusum; therefore, it needs to be formulated more practically and

Advantages of celecoxib nanosuspension formulation and transformation into tablets.

Science.gov (United States)

Dolenc, Andrej; Kristl, Julijana; Baumgartner, Sasa; Planinsek, Odon

2009-07-06

Drugs with low aqueous solubility and high permeability (BCS class II) present a high proportion of all drugs. This study examines the critical issues regarding engineering of a nanosuspension tailored to increase drug dissolution rate and its transformation into dry powder suitable for tabletting. Nanosuspensions of celecoxib, a selective COX-2 inhibitor with low water solubility, were produced by the emulsion-diffusion method using three different stabilizers (Tween) 80, PVP K-30 and SDS) and characterized by particle size analysis, dissolution testing, scanning electron microscopy imaging, differential scanning calorimetry and X-ray powder diffraction. Spray-dried nanosuspension was blended with microcrystalline cellulose, and compressed to tablets, and their tensile strength, porosity and elastic recovery of tablets were investigated. The selection of solvent and stabilizers is critical, firstly to achieve controlled crystallization and size, and secondly to increase the wettability of the hydrophobic drug. The crystalline nano-sized celecoxib alone or in tablets showed a dramatic increase of dissolution rate and extent compared to micronized. SEM images showed that the nanoparticle morphology was influenced by the choice of stabilizers. Celecoxib nanosuspension stabilized with PVP K-30 and SDS showed advantages over Tween 80 due to sticking of the dried product and unexpected changes observed on DSC curves. Markedly lower compaction forces are needed for nano-sized compared to micro-sized celecoxib to produce tablets of equal tensile strength.

Development and evaluation of microporous osmotic tablets of diltiazem hydrochloride

Directory of Open Access Journals (Sweden)

Afifa Bathool

2012-01-01

Full Text Available Microporous osmotic tablet of diltiazem hydrochloride was developed for colon targeting. These prepared microporous osmotic pump tablet did not require laser drilling to deliver the drug to the specific site of action. The tablets were prepared by wet granulation method. The prepared tablets were coated with microporous semipermeable membrane and enteric polymer using conventional pan coating process. The incorporation of sodium lauryl sulfate (SLS, a leachable pore-forming agent, could form in situ delivery pores while coming in contact with gastrointestinal medium. The effect of formulation variables was studied by changing the amounts of sodium alginate and NaCMC in the tablet core, osmogen, and that of pore-forming agent (SLS used in the semipermeable coating. As the amount of hydrophilic polymers increased, drug release rate prolonged. It was found that drug release was increased as the concentration of osmogen and pore-former was increased. Fourier transform infrared spectroscopy and Differential scanning calorimetry results showed that there was no interaction between drug and polymers. Scanning electron microscopic studies showed the formation of pores after predetermined time of coming in contact with dissolution medium. The formation of pores was dependent on the amount of pore former used in the semipermeable membrane. in vitro results showed acid-resistant, timed release at an almost zero order up to 24 hours. The developed osmotic tablets could be effectively used for prolonged delivery of Diltiazem HCl.

Keep taking the tablets? Assessing the use of tablet devices in learning and teaching activities in the Further Education sector

OpenAIRE

Khristin Fabian; Donald MacLean

2014-01-01

This article summarises the methodology and outcomes of an interventionist/action research project to assess the benefits, and potential pitfalls, of the use of mobile devices in learning and teaching activities in a Further Education environment. A bank of 15 tablet devices were purchased and prepared for classroom use. Staff members were approached to scope potential activities and uses for the tablet devices. Three departments took part in the research activity: the Language School, Social...

Orally-dissolving film for sublingual and buccal delivery of ropinirole.

Science.gov (United States)

Lai, Ka Lun; Fang, Yuan; Han, Hao; Li, Qingqing; Zhang, Shuai; Li, Ho Yin; Chow, Shing Fung; Lam, Tai Ning; Lee, Wai Yip Thomas

2018-03-01

Ropinirole is a very important treatment option for Parkinson's disease (PD), a major threat to the aging population. However, this drug undergoes extensive first-pass metabolism, resulting in a low oral bioavailability. Moreover, the necessity of frequent administration due to the short half-life of ropinirole may jeopardize patient compliance. Indeed, taking this drug in solid oral dosage forms (e.g. Tablet) can be a challenge because of the tremor, rigidity, limited mobility, and impaired drug absorption experienced by PD patients. In light of these, there is a pressing need to devise formulations for the delivery of ropinirole that allow simple and easy administration and fast drug action, as well as avoidance of first-pass metabolism and overcoming the challenge of impaired absorption due to gastrointestinal dysfunctions, etc. Herein, we seek to overcome all these challenges via sublingual or buccal delivery of orally-dissolving films. Accordingly, we aimed to fabricate and characterize orally-dissolving films of ropinirole and assess their in vivo pharmacokinetics after sublingual and buccal administration. The ropinirole oral film was non-toxic and exhibited fast disintegration and dissolution and was physically stable for at least 28 days. Upon buccal/sublingual administration of the oral films, ropinirole reached the systemic circulation within 15 min and bioavailability was significantly improved, which may be attributable to avoidance of first-pass metabolism via absorption through the oral cavity. In conclusion, our ropinirole oral film improved bioavailability after sublingual or buccal administration. This formulation potentially overcomes biopharmaceutical challenges and provide a convenient means of administration of ropinirole or other anti-PD drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

[Influence of polymer type on the physical properties and the release study of papaverine hydrochloride from tablets].

Science.gov (United States)

Kasperek, Regina; Polski, Andrzej; Sobótka-Polska, Karolina; Poleszak, Ewa

2014-01-01

Polymers are widely used in drug manufacturing. Researchers studied their impact on the bioavailability of active substances or on physical properties of tablets for many years. To study the influence of polymer excipients, such as microcrystalline cellulose (Avicel PH 101, Avicel PH 102), croscarmellose sodium, crospovidone or polyvinylpyrrolidone, on the release profile of papaverine hydrochloride from tablets and on the physical properties of tablets. Six series of uncoated tablets were prepared by indirect method, with previous wet granulation. Tablets contained papaverine hydrochloride and various excipients. The physical properties of the prepared granules, tablets and the release profile of papaverine hydrochloride from tablets were examined. The content of papaverine hydrochloride from the release study were determined spectrophotometrically. All tablets met the pharmacopoeia requirements during following tests: the disintegration time of tablets, uncoated tablets resistance to abrasion, the weight uniformity and dose formulations, their dimensions, the resistance to crushing of tablets and the drug substance content in the tablet. In four cases more than 80% of papaverine was released up to 2 min, in one formula it was up to 5 min, and in last one up to 10 min. Tablets containing crospovidone disintegrated faster than tablets with croscarmellose sodium. Adding gelatinized starch to the tablet composition increased the disintegration time, hardness and delayed the release of papaverine. During the wet granulation process, granules containing polyvinylpyrrolidone were characterized by a suitable flow properties and slightly prolonged disintegration time. Tablets containing Avicel PH 102 compared to tablets with Avicel PH 101 had less weight loss during the test of mechanical resistance, improved hardness and faster release profile of papaverine from tablets.

78 FR 15956 - Guidance for Industry on Tablet Scoring: Nomenclature, Labeling, and Data for Evaluation...

Science.gov (United States)

2013-03-13

...] Guidance for Industry on Tablet Scoring: Nomenclature, Labeling, and Data for Evaluation; Availability...) is announcing the availability of a guidance for industry entitled ``Tablet Scoring: Nomenclature... evaluating and labeling tablets that have been scored. (A scoring feature facilitates tablet splitting, which...

Lyophilized mucoadhesive-dendrimer enclosed matrix tablet for extended oral delivery of albendazole.

Science.gov (United States)

Mansuri, Shakir; Kesharwani, Prashant; Tekade, Rakesh Kumar; Jain, Narendra Kumar

2016-05-01

Dendrimers are multifunctional carriers widely employed for delivering drugs in a variety of disease conditions including HIV/AIDS and cancer. Albendazole (ABZ) is a commonly used anthelmintic drug in human as well as veterinary medicine. In this investigation, ABZ was formulated as a "muco-dendrimer" based sustained released tablet. The mucoadhesive complex was synthesized by anchoring chitosan to fifth generation PPI dendrimer (Muco-PPI) and characterized by UV, FTIR, (1)H NMR spectroscopy and electron microscopy. ABZ was entrapped inside Muco-PPI followed by lyophilization and tableting as matrix tablet. A half-life (t1/2) of 8.06±0.15, 8.17±0.47, 11.04±0.73, 11.49±0.92, 12.52±1.04 and 16.9±1.18h was noted for ABZ (free drug), conventional ABZ tablet (F1), conventional ABZ matrix tablet (F2), PPI-ABZ complex, PPI-ABZ matrix tablet (F3) and Muco-PPI-ABZ matrix tablet (F4), respectively. Thus the novel mucoadhesive-PPI based formulation of ABZ (F4) increased the t1/2 of ABZ significantly by almost twofold as compared to the administration of free drug. The in vivo drug release data showed that the Muco-PPI based formulations have a significantly higher Cmax (2.40±0.02μg/mL) compared with orally administered free ABZ (0.19±0.07μg/mL) as well as conventional tablet (0.20±0.05μg/mL). In addition, the Muco-PPI-ABZ matrix tablet displayed increased mean residence time (MRT) and is therefore a potential candidate to appreciably improve the pharmacokinetic profile of ABZ. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of polymer type on characteristics of buccal tablets using factorial design

Directory of Open Access Journals (Sweden)

O. Esim

2018-01-01

Full Text Available A two factor three level factorial design was used to investigate the effects of carbopol and cationic hydrophilic polymers which have a common use in buccal drug formulations. Statistical models with interaction terms were derived to evaluate influence of carbopol (X1 and chitosan (X2 on tablet disintegration (Y1 and dissolution (Y2, mechanical properties (Y3, swelling (Y4. Tablet disintegration studies were carried out using two different pH environments within buccal region pH limits and also two different commonly used dissolution methods for buccal tablets were also investigated to compare the effect of polymer type on dissolution. Polymer type and ratio affect the characteristics of the buccal tablets due to their different physicochemical behavior at buccal pH. Also significant variances between dissolution profiles for buccal tablets, using either USP Paddle or flow through cell methods were found. These results indicate that both polymer type and ratio as well as combination of them effects the drug behavior in different ways. Keywords: Buccal tablet, Hydrophilic matrix, Effect of polymer, Carbopol, Chitosan

Graphics Tablet Technology in Second Year Thermal Engineering Teaching

Science.gov (United States)

Carrillo, Antonio; Cejudo, José Manuel; Domínguez, Fernando; Rodríguez, Eduardo

2013-01-01

Graphics tablet technology is well known in markets such as manufacturing, graphics arts and design but it has not yet found widespread acceptance for university teaching. A graphics tablet is an affordable teaching tool that combines the best features from traditional and new media. It allows developing a progressive, interactive lecture (as a…

Once Upon a Tablet: A School Toy in the Making

DEFF Research Database (Denmark)

Froes, Isabel

2015-01-01

exploring what emergent behaviors are present when preschool children use and play with tablets in their formal learning environments. In order to map the array of play and usage of such devices for this research, after the first round of observations, the tablet taxonomy was outlined and has been applied......The current paper introduces the definitions of playful literacy and multimodal hyper-intertextuality, key concepts when researching children’s use of digital tablets. The pilot investigation, which took place in spring 2014 in Denmark, is part of a larger cross-cultural comparative project...

Analysis of ecstasy tablets: comparison of reflectance and transmittance near infrared spectroscopy.

Science.gov (United States)

Schneider, Ralph Carsten; Kovar, Karl-Artur

2003-07-08

Calibration models for the quantitation of commonly used ecstasy substances have been developed using near infrared spectroscopy (NIR) in diffuse reflectance and in transmission mode by applying seized ecstasy tablets for model building and validation. The samples contained amphetamine, N-methyl-3,4-methylenedioxy-amphetamine (MDMA) and N-ethyl-3,4-methylenedioxy-amphetamine (MDE) in different concentrations. All tablets were analyzed using high performance liquid chromatography (HPLC) with diode array detection as reference method. We evaluated the performance of each NIR measurement method with regard to its ability to predict the content of each tablet with a low root mean square error of prediction (RMSEP). Best calibration models could be generated by using NIR measurement in transmittance mode with wavelength selection and 1/x-transformation of the raw data. The models build in reflectance mode showed higher RMSEPs using as data pretreatment, wavelength selection, 1/x-transformation and a second order Savitzky-Golay derivative with five point smoothing was applied to obtain the best models. To estimate the influence of inhomogeneities in the illegal tablets, a calibration of the destroyed, i.e. triturated samples was build and compared to the corresponding data of the whole tablets. The calibrations using these homogenized tablets showed lower RMSEPs. We can conclude that NIR analysis of ecstasy tablets in transmission mode is more suitable than measurement in diffuse reflectance to obtain quantification models for their active ingredients with regard to low errors of prediction. Inhomogeneities in the samples are equalized when measuring the tablets as powdered samples.

Implementation of Quality by Design for Formulation of Rebamipide Gastro-retentive Tablet.

Science.gov (United States)

Ha, Jung-Myung; Seo, Jeong-Woong; Kim, Su-Hyeon; Kim, Ju-Young; Park, Chun-Woong; Rhee, Yun-Seok; Park, Eun-Seok

2017-11-01

The purpose of the present study was to develop a rebamipide (RBM) gastro-retentive (GR) tablet by implementing quality by design (QbD). RBM GR tablets were prepared using a sublimation method. Quality target product profile (QTPP) and critical quality attributes (CQAs) of the RBM GR tablets were defined according to the preliminary studies. Factors affecting the CQAs were prioritized using failure mode and effects analysis (FMEA). Design space and optimum formulation were established through a mixture design. The validity of the design space was confirmed using runs within the area. The QTPP of the RBM GR tablets was the orally administered GR tablet containing 300 mg of RBM taken once daily. Based on the QTPP, dissolution rate, tablet friability, and floating property were chosen as CQAs. According to the risk assessment, the amount of sustained-release agent, sublimating material, and diluent showed high-risk priority number (RPN) values above 40. Based on the RPN, these factors were further investigated using mixture design methodology. Design space of formulations was depicted as an overlaid contour plot and the optimum formulation to satisfy the desired responses was obtained by determining the expected value of each response. The similarity factor (f2) of the release profile between predicted response and experimental response was 89.463, suggesting that two release profiles are similar. The validity of the design space was also confirmed. Consequently, we were able to develop the RBM GR tablets by implementing the QbD concept. These results provide useful information for development of tablet formulations using the QbD.

3D extrusion printing of high drug loading immediate release paracetamol tablets.

Science.gov (United States)

Khaled, Shaban A; Alexander, Morgan R; Wildman, Ricky D; Wallace, Martin J; Sharpe, Sonja; Yoo, Jae; Roberts, Clive J

2018-03-01

The manufacture of immediate release high drug loading paracetamol oral tablets was achieved using an extrusion based 3D printer from a premixed water based paste formulation. The 3D printed tablets demonstrate that a very high drug (paracetamol) loading formulation (80% w/w) can be printed as an acceptable tablet using a method suitable for personalisation and distributed manufacture. Paracetamol is an example of a drug whose physical form can present challenges to traditional powder compression tableting. Printing avoids these issues and facilitates the relatively high drug loading. The 3D printed tablets were evaluated for physical and mechanical properties including weight variation, friability, breaking force, disintegration time, and dimensions and were within acceptable range as defined by the international standards stated in the United States Pharmacopoeia (USP). X-ray Powder Diffraction (XRPD) was used to identify the physical form of the active. Additionally, XRPD, Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR) and differential scanning calorimetry (DSC) were used to assess possible drug-excipient interactions. The 3D printed tablets were evaluated for drug release using a USP dissolution testing type I apparatus. The tablets showed a profile characteristic of the immediate release profile as intended based upon the active/excipient ratio used with disintegration in less than 60 s and release of most of the drug within 5 min. The results demonstrate the capability of 3D extrusion based printing to produce acceptable high-drug loading tablets from approved materials that comply with current USP standards. Copyright © 2018 Elsevier B.V. All rights reserved.

Optimization of composition and technology for tablets containing aspen bark extract

Directory of Open Access Journals (Sweden)

O. I. Onуshkiv

2015-04-01

Full Text Available Summary. Influence of quantitativefactorsof basic quality parameters has been investigated for tabletscontainingextractofaspenbark, receivedbydirect pressingmethodand mathematicalplanningof experiment.To set the optimal composition of tablets containingaspen bark extract the proportion ofProsolv 90, Ludiflash and Polyplasdone XL 10 has been studied. The relationship between the studied factors and parameters of tablets’ regression models has been described. As a result tablets containing aspen bark extractwith mentioned above formula match necessary pharmaco-technological parameters of State Pharmacopoeia of Ukraine. Introduction.Peptic and duodenal ulcer are serious problems in modern medicine. According to statistics this disease is found in 12,83 % of the adult population in Ukraine [1]. Among the remedies for treatment and prevention of peptic ulcers we can find herbal medicines that may be used in the treatment of pre-peptic conditions and during an acute period as a means of adjuvant therapy in combination with strong remedies [2]. An antacid, cytoprotective, anti-inflammatory and reparative actions of aspen bark extract were proved by the researches of domestic and foreign scientists [3, 4]. Previously, we researched the mutual influence of excipients on the main indicators of quality of aspen bark extract tablets obtained by direct compression method. Due to these researches the best excipientshave been selected. It is necessary to establish the optimal quantitative proportion of excipients in order to obtain the tablets with suitable parameters that satisfy the requirements of the State Pharmacopoeia of Ukraine (SPU [5, 6]. Rational selection of excipients requires wide range of studies to obtain the optimal composition of the tablets containing aspen bark extract. Using mathematical planning of the experiment gives the possibility to reduce the number of experiments and to obtain the most detailed results of researches about effects

A new formulation for orally disintegrating tablets using a suspension spray-coating method.

Science.gov (United States)

Okuda, Y; Irisawa, Y; Okimoto, K; Osawa, T; Yamashita, S

2009-12-01

The aim of this study was to design a new orally disintegrating tablet (ODT) that has high tablet hardness and a fast oral disintegration rate using a new preparation method. To obtain rapid disintegration granules (RDGs), a saccharide, such as trehalose, mannitol, or lactose, was spray-coated with a suspension of corn starch using a fluidized-bed granulator (suspension method). As an additional disintegrant, crospovidone, light anhydrous silicic acid, or hydroxypropyl starch was also included in the suspension. The RDGs obtained possessed extremely large surface areas, narrow particle size distribution, and numerous micro-pores. When tabletting these RDGs, it was found that the RDGs increased tablet hardness by decreasing plastic deformation and increasing the contact frequency between granules. In all tablets, a linear relationship was observed between tablet hardness and oral disintegration time. From each linear correlation line, a slope (D/H value) and an intercept (D/H(0) value) were calculated. Tablets with small D/H and D/H(0) values could disintegrate immediately in the oral cavity regardless of the tablet hardness and were considered to be appropriate for ODTs. Therefore, these values were used as key parameters to select better ODTs. Of all the RDGs prepared in this study, mannitol spray-coated with a suspension of corn starch and crospovidone (2.5:1 w/w ratio) showed most appropriate properties for ODTs; fast in vivo oral disintegration time, and high tablet hardness. In conclusion, this simple method to prepare superior formulations for new ODTs was established by spray-coating mannitol with a suspension of appropriate disintegrants.

Pharmacokinetics of hydrocodone extended-release tablets formulated with different levels of coating to achieve abuse deterrence compared with a hydrocodone immediate-release/acetaminophen tablet in healthy subjects.

Science.gov (United States)

Darwish, Mona; Bond, Mary; Tracewell, William; Robertson, Philmore; Yang, Ronghua

2015-01-01

A hydrocodone extended-release (ER) formulation employing the CIMA(®) Abuse-Deterrence Technology platform was developed to provide resistance against rapid release of hydrocodone when tablets are comminuted or taken with alcohol. This study evaluated the pharmacokinetics of three hydrocodone ER tablet prototypes with varying levels of polymer coating to identify the prototype expected to have the greatest abuse deterrence potential based on pharmacokinetic characteristics that maintain systemic exposure to hydrocodone comparable to that of a commercially available hydrocodone immediate-release (IR) product. In this four-period crossover study, healthy subjects aged 18-45 years were randomized to receive a single intact, oral 45-mg tablet of one of three hydrocodone ER prototypes (low-, intermediate-, or high-level coating) or an intact, oral tablet of hydrocodone IR/acetaminophen (APAP) 10/325 mg every 6 h until four tablets were administered, with each of the four treatments administered once over the four study periods. Dosing periods were separated by a minimum 5-day washout. Naltrexone 50 mg was administered to block opioid receptors. Blood samples for pharmacokinetic assessments were collected predose and through 72 h postdose. Parameters assessed included maximum observed plasma hydrocodone concentration (C(max)), time to C(max) (t(max)), and area under the concentration-time curve from time 0 to infinity (AUC(0-∞)). Mean C(max) values were 49.2, 32.6, and 28.4 ng/mL for the low-, intermediate-, and high-level coating hydrocodone ER tablet prototypes, respectively, and 37.3 ng/mL for the hydrocodone IR/APAP tablet; respective median t(max) values were 5.9, 8.0, 8.0, and 1.0 h. Total systemic exposure to hydrocodone (AUC(0-∞)) was comparable between hydrocodone ER tablet prototypes (640, 600, and 578 ng·h/mL, respectively) and hydrocodone IR/APAP (581 ng·h/mL). No serious adverse events or deaths were reported. The most common adverse events included

Formulation and evaluation of sublingual tablets of losartan potassium

Directory of Open Access Journals (Sweden)

Nikunj J. Aghera

2012-05-01

Full Text Available Objective: Sublingual tablets of Losartan Potassium were prepared to improve its bioavailability, to avoid pre-systemic metabolism in the gastrointestinal tract and hepatic first pass elimination. Methods: The Sublingual tablets were prepared by direct compression procedure using different concentration of Starch 1500 and microcrystalline cellulose. Compatibility studies of drug and polymer were performed by FTIR spectroscopy and DSC. Preformulation property of API was evaluated. Postcompressional parameters such disintegration time, wetting time, water absorption ratio, in vitro drug release and in vivo bioavailability study of optimized formulation were determined. Results: FTIR spectroscopy and DSC study revealed that there was no possible interaction between drug and polymers. The precompression parameters were in acceptable range of pharmacopoeial specification. The disintegration time of optimized formulation (F3 was upto 48 sec. The in vitro release of Losartan Potassium was upto 15 min. The percentage relative bioavailability of Losartan Potassium from optimized sublingual tablets was found to be 144.7 %. Conclusions: Sublingual tablets of Losartan Potassium were successfully prepared with improved bioavailability.

Comparative in vitro and in vivo evaluation of three tablet formulations of amiodarone in healthy subjects

Directory of Open Access Journals (Sweden)

J Emami

2010-09-01

Full Text Available "nBackground and the purpose of the study:The relative in vivo bioavailability and in vitro dissolution studies of three chemically equivalent amiodarone generic products in healthy volunteers was evaluated in three separate occasions. The possibility of a correlation between in vitro and in vivo performances of these tablet formulations was also evaluated. "nMethods: The bioequivalence studies were conducted based on a single dose, two-sequence, cross over randomized design. The bioavailability was compared using AUC0-72, AUC0-∞, Cmax and Tmax. Similarity factor, dissolution efficiency (DE, and mean dissolution time (MDT was used to compare the dissolution profiles. Polynomial linear correlation models were tested using either MDT vs mean residence time (MRT or fraction of the drug dissolved (FRD vs fraction of the drug absorbed (FRA. "nResults: Significant differences were found in the dissolution performances of the tested formulations and therefore they were included in the development of the correlation. The 90% confidence intervals of the log-transformed AUC0-72, AUC0-∞, and Cmax of each two formulations in each bioequivalence studies were within the acceptable range of 80-125%. Differences were not observed between the untransformed Tmax values. Poor correlation was found between MRT and MDT of the products. A point-to-point correlation which is essential for a reliable correlation was not obtained between pooled FRD and FRA. The dissolution condition which was used for amiodarone tablets failed for formulations which were bioequivalent in vivo and significant difference between the dissolution characteristics of products (f2<50 did not reflect their in vivo properties. Major conclusions: Bioequivalence studies should be considered as the only acceptable way to ensure the interchangeability and in vivo equivalence of amiodarone generic drug products. The dissolution conditions used of the present study could be used for routine and in

Colon Targeted Guar Gum Compression Coated Tablets of Flurbiprofen: Formulation, Development, and Pharmacokinetics

Directory of Open Access Journals (Sweden)

Sateesh Kumar Vemula

2013-01-01

Full Text Available The rationale of the present study is to formulate flurbiprofen colon targeted compression coated tablets using guar gum to improve the therapeutic efficacy by increasing drug levels in colon, and also to reduce the side effects in upper gastrointestinal tract. Direct compression method was used to prepare flurbiprofen core tablets, and they were compression coated with guar gum. Then the tablets were optimized with the support of in vitro dissolution studies, and further it was proved by pharmacokinetic studies. The optimized formulation (F4 showed almost complete drug release in the colon (99.86% within 24 h without drug loss in the initial lag period of 5 h (only 6.84% drug release was observed during this period. The pharmacokinetic estimations proved the capability of guar gum compression coated tablets to achieve colon targeting. The Cmax of colon targeted tablets was 11956.15 ng/mL at Tmax of 10 h whereas it was 15677.52 ng/mL at 3 h in case of immediate release tablets. The area under the curve for the immediate release and compression coated tablets was 40385.78 and 78214.50 ng-h/mL and the mean resident time was 3.49 and 10.78 h, respectively. In conclusion, formulation of guar gum compression coated tablets was appropriate for colon targeting of flurbiprofen.

Pharmaceutical equivalence of metformin tablets with various binders

Directory of Open Access Journals (Sweden)

L. C. Block

2009-01-01

Full Text Available

Metformin hydrochloride is a high-dose drug widely used as an oral anti-hyperglycemic agent. As it is highly crystalline and has poor compaction properties, it is difficult to form tablets by direct compression. The aim of this study was to develop adequate metformin tablets, pharmaceutically equivalent to the reference product, Glucophage^® (marketed as Glifage^® in Brazil. Metformin 500mg tablets were produced by wet granulation with various binders (A = starch, B = starch 1500^®, C = PVP K30^®, D = PVP K90^®. The tablets were analyzed for their hardness, friability, disintegration, dissolution, content uniformity and dissolution profile (basket apparatus at 50 rpm, pH 6.8 phosphate buffer. The 4 formulations, F1 (5% A and 5% C, F2 (5% B and 5% C, F3 (10% C and F4 (5% D, demonstrated adequate uniformity of content, hardness, friability, disintegration and total drug dissolution after 30 minutes (F1, F2 and F4, and after 60 minutes (F3. The drug release time profiles fitted a Higuchi model (F1, F2 and F3, similarly to the pharmaceutical reference, or a zero order model (F4. The dissolution efficiency for all the formulations was 75%, except for F3 (45%. F1 and F2 were thus equivalent to Glifage^®. Keywords: dissolution; metformin; tablet; binder; pharmaceutical equivalence

Evaluation of an enteric coated naproxen tablet using gamma scintigraphy and pH monitoring

International Nuclear Information System (INIS)

Hardy, J.G.; Evans, D.F.; Zaki, I.; Clark, A.G.; Toennesen, H.H.

1987-01-01

Enteric coated naproxen tablets and pH-sensitive radiotelemetry capsules were both radiolabelled and administered to 6 healthy volunteers following breakfast. The median gastric emptying times for the tablets and capsules were 3.3 h and 4.2 h, respectively. In general, the intragastric pH remained below 2 with only transient increases following food comsumption. Five of the naproxen tablets disintegrated in the small intestine and one in the stomach. In the ileum the pH was greater than 6 resulting in a mean time for tablet disintegration of 1.2 h after gastric emptying. There was a close correlation between tablet disintegration and the first detection of naproxen in the blood. Peak plasma concentrations of the drug occurred 4 h after tablet disintegration. This study has demonstrated that gastric emptying is the main factor influencing the onset of drug release from enteric coated tablets. 8 refs.; 3 figs.; 3 tabs

Design and evaluation of enteric-coated tablets for rifampicin and isoniazid combinations.

Science.gov (United States)

Wang, Yongjun; Liu, Hongzhuo; Liu, Kai; Sun, Jin; He, Zhonggui

2013-01-01

In order to improve the bioavailability of rifampicin (RIF) from rifampicin and isoniazid (INH) combination formulations, the physicochemical characteristics of RIF, stability of RIF in different pH buffers in the presence of INH, as well as the effect of particle size of RIF materials on the dissolution rate were investigated. On the basis of the above examinations, enteric-coated tablets for RIF and INH combinations were designed and prepared. RIF showed low solubility and high apparent distribution coefficient in the intestinal pH (pH 4.0-7.4). With the decrease in pH, the degradation of RIF increase and the presence of INH deepen the degradation. Enteric-coated tablets were prepared after grinding the RIF materials by dry granulation technique. The pharmacokinetics of RIF and INH of self-made enteric-coated tablets in dogs were studied by comparing with the reference tablets. The AUC(0-48) of RIF in both reference and test tablets were 304.77 ± 42.27 and 353.79 ± 31.63 µg·h·mL(-1), respectively. The AUC(0-48) of INH in both reference and test tablets were 17.14 ± 8.59 and 19.62 ± 10.57 µg·h·mL(-1), respectively. Enteric-coated tablets may minimize the decomposition of RIF in gastrointestinal tract and improve the bioavailability.

VERIFICATION HPLC METHOD OF QUANTITATIVE DETERMINATION OF AMLODIPINE IN TABLETS

Directory of Open Access Journals (Sweden)

Khanin V. A

2014-10-01

a volume of 100.0 ml. Preparation of the working standard solution sample amlodipine besylate. 50.0 mg of amlodipine RCC dissolved in methanol and dilute with the same solvent to 50.0 ml. 5.0 ml of this solution argue with methanol to volume 100.0 ml. Before the major controlled trials validated the existence of documents certifying the suitability vykorystovanoho equipment, raw materials and chemicals. Validation of the methodology was carried out in accordance with the requirements of SPhU. Results & discussion. Linearity methods defined within 80-120% of nominal concentrations. The linearity of the methods supported by the entire range of concentrations studied (b=0.9845, Sb=0,01473, a=1.5282, Sa=1.4956, S0=0.5486, r=0.9992. It is proved that the validated method characterized by sufficient convergence and accuracy over the entire range of concentrations (ΔZ=1.03, δ%=0.09. Conclusion. During verification methods of quantitative determination of amlodipine besylate tablets were studied characteristics validated HPLC method: accuracy, linearity, precision, specificity, and internal laboratory precision. Validation technique characteristics do not exceed the critical value of error (1.6% and characterized by qualitative analytical indicators. This technique can be correctly reproduced in the laboratory conditions, and is independent of the excipients.

Exploring the Use of Tablets for Student Teaching Supervision

Science.gov (United States)

Johnson, Joseph A.; Wesley, Whitney M.; Yerrick, Randy

2016-01-01

While research on the use of tablets in the field of education is emerging, existing research on the use of this tool for the purposes of student teaching supervision is very limited. This study aimed to explore the application of iPad tablets for student teacher supervision in a teacher preparation program at a large state university in the…

Endometrial safety of ultra-low-dose estradiol vaginal tablets

DEFF Research Database (Denmark)

Simon, James; Nachtigall, Lila; Ulrich, Lian G

2010-01-01

To evaluate the endometrial hyperplasia and carcinoma rate after 52-week treatment with ultra-low-dose 10-microgram 17ß-estradiol vaginal tablets in postmenopausal women with vaginal atrophy.......To evaluate the endometrial hyperplasia and carcinoma rate after 52-week treatment with ultra-low-dose 10-microgram 17ß-estradiol vaginal tablets in postmenopausal women with vaginal atrophy....

Endometrial safety of ultra-low-dose estradiol vaginal tablets

DEFF Research Database (Denmark)

Simon, James; Nachtigall, Lila; Ulrich, Lian G

2010-01-01

To evaluate the endometrial hyperplasia and carcinoma rate after 52-week treatment with ultra-low-dose 10-microgram 17β-estradiol vaginal tablets in postmenopausal women with vaginal atrophy.......To evaluate the endometrial hyperplasia and carcinoma rate after 52-week treatment with ultra-low-dose 10-microgram 17β-estradiol vaginal tablets in postmenopausal women with vaginal atrophy....

[Effect of Food Thickeners on the Disintegration, Dissolution, and Drug Activity of Rapid Oral-disintegrating Tablets].

Science.gov (United States)

Tomita, Takashi; Kohda, Yukinao; Kudo, Kenzo

2018-01-01

　For patients with dysphagia in medical facilities and nursing homes, food thickeners are routinely used to aid the ingestion of medicines such as tablets. However, some types of thickeners affect the disintegration and dissolution of tablets, such as rapidly-disintegrating magnesium oxide tablets and donepezil hydrochloride orally disintegrating tablets. Additionally, delayed disintegration and dissolution of tablets affect a drug's efficacy. As an example, with Voglibose orally disintegrating tablets, marked differences are observed in changes in glucose levels during glucose tolerance testing. When using food thickeners to aid tablet ingestion, it is therefore necessary to select a product that has little effect on drug disintegration, dissolution, and activity.

Development and Optimum Composition of Locally Developed Potable Water Treatment Tablets

Directory of Open Access Journals (Sweden)

Josiah Oladele BABATOLA

2009-07-01

Full Text Available Current high level of energy cost and operational cost of membrane technologies and couple with difficulties in obtaining chemicals for potable water treatment give rooms for development of local substance and low cost adsorbents for water treatment. This paper presents a follow-up study on an earlier work in which some water treatment Tablets were produced and tested. The current work was directed at establishing the optimum composition of the tablets. Alum, calcium hypochlorite and lime were combined in proportion and made into pastes and tablets. Residual chlorine contents of the tablets were determined. The quality of stream water samples treated with the tablets was measured by chlorine content, pH and turbidity removal. It is concluded that the best composition is one part alum, two parts hypochlorite and three parts lime and this produced treated water pH of 7.8, chlorine residual of 5.0 mg/l and settled water turbidity 3.0 NTU. The product is aimed for use in rural communities to reduce rampaging death from water borne diseases.

Multispectral UV imaging for fast and non-destructive quality control of chemical and physical tablet attributes

DEFF Research Database (Denmark)

Klukkert, Marten; Wu, Jian X; Rantanen, Jukka

2016-01-01

Monitoring of tablet quality attributes in direct vicinity of the production process requires analytical techniques that allow fast, non-destructive, and accurate tablet characterization. The overall objective of this study was to investigate the applicability of multispectral UV imaging...... as a reliable, rapid technique for estimation of the tablet API content and tablet hardness, as well as determination of tablet intactness and the tablet surface density profile. One of the aims was to establish an image analysis approach based on multivariate image analysis and pattern recognition to evaluate...... the potential of UV imaging for automatized quality control of tablets with respect to their intactness and surface density profile. Various tablets of different composition and different quality regarding their API content, radial tensile strength, intactness, and surface density profile were prepared using...

Authentication of gold nanoparticle encoded pharmaceutical tablets using polarimetric signatures.

Science.gov (United States)

Carnicer, Artur; Arteaga, Oriol; Suñé-Negre, Josep M; Javidi, Bahram

2016-10-01

The counterfeiting of pharmaceutical products represents concerns for both industry and the safety of the general public. Falsification produces losses to companies and poses health risks for patients. In order to detect fake pharmaceutical tablets, we propose producing film-coated tablets with gold nanoparticle encoding. These coated tablets contain unique polarimetric signatures. We present experiments to show that ellipsometric optical techniques, in combination with machine learning algorithms, can be used to distinguish genuine and fake samples. To the best of our knowledge, this is the first report using gold nanoparticles encoded with optical polarimetric classifiers to prevent the counterfeiting of pharmaceutical products.

Chemoinformetrical evaluation of dissolution property of indomethacin tablets by near-infrared spectroscopy.

Science.gov (United States)

Otsuka, Makoto; Tanabe, Hideaki; Osaki, Kazuo; Otsuka, Kuniko; Ozaki, Yukihiro

2007-04-01

The purpose of this study was to use near-infrared spectrometry (NIR) with chemoinformetrics to predict the change of dissolution properties in indomethacin (IMC) tablets during the manufacturing process. A comparative evaluation of the dissolution properties of the tablets was performed by the diffused reflectance (DRNIR) and transmittance (TNIR) NIR spectroscopic methods. Various kinds of IMC tablets (200 mg) were obtained from a powder (20 mg of IMC, 18 mg of microcrystalline cellulose, 160 mg of lactose, and 2 mg of magnesium stearate) under various compression pressures (60-398 MPa). Dissolution tests were performed in phosphate buffer, and the time required for 75% dissolution (T75) and mean dissolution time (MDT) were calculated. DRNIR and TNIR spectra were recorded, and the both NIR spectra used to establish a calibration model for predicting the dissolution properties by principal component regression analysis (PCR). The T75 and MDT increased as the compression pressure increased, since tablet porosity decreased with increasing pressure. Intensity of the DRNIR spectra of the compressed tablets decreased as the compression pressure increased. However, the intensity of TNIR spectra increased along with the pressure. The calibration models used to evaluate the dissolution properties of tablets were established by using PCR based on both DRNIR and TNIR spectra of the tablets. The multiple correlation coefficients of the relationship between the actual and predictive T75 by the DRNIR and TNIR methods were 0.831 and 0.962, respectively. It is possible to predict the dissolution properties of pharmaceutical preparations using both DRNIR and TNIR chemoinformetric methods. The TNIR method was more accurate for predictions of the dissolution behavior of tablets than the DRNIR method. (c) 2007 Wiley-Liss, Inc.

The comparison of hyaluronic acid vaginal tablets with estradiol vaginal tablets in the treatment of atrophic vaginitis: a randomized controlled trial.

Science.gov (United States)

Ekin, Murat; Yaşar, Levent; Savan, Kadir; Temur, Muzaffer; Uhri, Mehmet; Gencer, Işıl; Kıvanç, Esra

2011-03-01

To compare the effectiveness of the vaginal tablets of hyaluronic acid and estrodiol for the treatment of atrophic vaginitis. Forty-two postmenopausal women with symptoms of atrophic vaginitis were randomized to take vaginal tablets of 25 μg estradiol (n = 21) (group I) or 5 mg hyaluronic acid sodium salt (n = 21) (group II) for 8 weeks. The symptoms of atrophic vaginitis were evaluated by a self-assessed 4-point scale of composite score and the degree of epithelial atrophy was determined as, none, mild, moderate and severe. Vaginal pH and maturation index were measured and compared in both the groups. The symptoms were relieved significantly in both the groups (P Hyaluronic acid vaginal tablets can be used in patients with atrophic vaginitis who do not want to or can not take local estrogen treatment.

The application of povidone in the preparation of modified release tablets

Directory of Open Access Journals (Sweden)

Kasperek Regina

2016-06-01

Full Text Available The aim of the study was to investigate the modified release of a model substance, of tablets containing different types of Kollidon and particular additives. Additionally, the release kinetics and mechanism of prolonged release of certain tablet preparations were investigated. In this work, tablets containing different types of povidone (Kollidon CL, Kollidon 30, Kollidon SR and other excipients were prepared by the direct compression technique. The results showed that tablets with fast disintegration and release should contain in their composition, Kollidon CL, lactose and Avicel, however, the use of β-CD instead of lactose or Avicel brings about a slight prolongation in the disintegration time of tablets and the release of an active substance. Furthermore, while other tablet compositions generated within this study must be considered as being prolonged release types, only two of these showed the best fitted mathematical models. The in vitro dissolution data reveal that the dissolution profiles of the two formulations, one containing Kollidon SR with the addition of Kollidon 30, and the second with HPMC K15M, Kollidon 30, Kollidon CL and lactose, best fitted the Higuchi model. Moreover, the release mechanism of these two formulations plotted well into Korsmeyer-Peppas, indicating a coupling of drug diffusion in the hydrated matrix, as well as polymer relaxation – the so-called anomalous transport (non-Fickian.

Prospective pilot study of a tablet computer in an Emergency Department.

Science.gov (United States)

Horng, Steven; Goss, Foster R; Chen, Richard S; Nathanson, Larry A

2012-05-01

The recent availability of low-cost tablet computers can facilitate bedside information retrieval by clinicians. To evaluate the effect of physician tablet use in the Emergency Department. Prospective cohort study comparing physician workstation usage with and without a tablet. 55,000 visits/year Level 1 Emergency Department at a tertiary academic teaching hospital. 13 emergency physicians (7 Attendings, 4 EM3s, and 2 EM1s) worked a total of 168 scheduled shifts (130 without and 38 with tablets) during the study period. Physician use of a tablet computer while delivering direct patient care in the Emergency Department. The primary outcome measure was the time spent using the Emergency Department Information System (EDIS) at a computer workstation per shift. The secondary outcome measure was the number of EDIS logins at a computer workstation per shift. Clinician use of a tablet was associated with a 38min (17-59) decrease in time spent per shift using the EDIS at a computer workstation (pcomputer was associated with a reduction in the number of times physicians logged into a computer workstation and a reduction in the amount of time they spent there using the EDIS. The presumed benefit is that decreasing time at a computer workstation increases physician availability at the bedside. However, this association will require further investigation. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Properties of early-stage concrete with setting-accelerating tablet in cold weather

International Nuclear Information System (INIS)

Ryou, Jae-Suk; Lee, Yong-Soo

2012-01-01

Highlights: ► Tablets were used as accelerators, which have a merit in cold weather. ► Tablets are almost not used at all as construction materials (powdered admixtures). ► 0.5 and 1.0% tablets satisfied workability and strength for early-frost prevention. ► It was found that it is possible for the 0.5 and 1.0% tablets in cold weather. - Abstract: Various methods are used at the early stages to control setting-time and strength of concrete, when cold-weather concrete is utilized. Among these methods is one that involves the use of an accelerator. Although economical, accelerators have difficulty securing workability because their early hydration makes them react rapidly. Therefore, how to make a tablet for cold-weather concrete, as with the existing medicines and foods, is discussed in this study, including the following items: mortar setting-time, workability by elapsed time, early strength to assure the development of adequate strength, and freezing–thawing resistance. As a result, both the 0.5 and 1.0% tablets were found to be superior. Thus, workability can be secured, as well as the development of early strength to prevent early frost.

Optimization of formulation and processing of Moringa oleifera and spirulina complex tablets.

Science.gov (United States)

Zheng, Yi; Zhu, Fan; Lin, Dan; Wu, Jun; Zhou, Yichao; Mark, Bohn

2017-01-01

Objective: To prepare a more comprehensive nutrition, more balanced proportion of natural nutritional supplement tablets with Moringa oleifera leaves and spirulina the two nutrients which have complementary natural food ingredients. Method: On the basis of research M. oleifera leaves with spirulina nutrient composition was determined on M. oleifera leaves and spirulina ratio of raw materials, and the choice of microcrystalline cellulose, sodium salt of caboxy methyl cellulose(CMC),magnesium stearate excipient, through single factor and orthogonal experiment, selecting the best formula tablets prepared by powder direct compression technology, for preparation of M. oleifera and spirulina complex tablets. Results: The best ratio of raw material for the M. oleifera leaves powder: spirulina powder was 7:3, the best raw materials for the tablet formulation was 88.5%, 8.0% microcrystalline cellulose, CMC 2.0%, stearin magnesium 1.5%, the optimum parameters for the raw material crushing 200-300 mesh particle size, moisture content of 7%, tableting pressure 40 kN. Conclusion: Through formulation and process optimization, we can prepare more comprehensive and balanced nutrition M. oleifera and spirulina complex tablets, its sheet-shaped appearance, piece weight variation, hardness, friability, disintegration and other indicators have reached the appropriate quality requirements.

The colorimetric analysis of anti-tuberculosis fixed-dose combination tablets and capsules.

Science.gov (United States)

Ellard, G A

1999-11-01

The perceived need to demonstrate whether or not the actual amounts of rifampicin, isoniazid and pyrazinamide in fixed-dose combination tablets or capsules correspond to their stated drug contents. To adapt specific, robust and simple colorimetric methods that have been previously applied to measuring plasma and urinary rifampicin, isoniazid, pyrazinamide and ethambutol concentrations to estimate tablet and capsule drug contents. The methods were applied to the analysis of 14 commercially manufactured fixed-dose combinations: two capsule and three tablet formulations containing rifampicin and isoniazid; seven tablet formulations containing rifampicin, isoniazid and pyrazinamide; and two tablet formulations containing rifampicin, isoniazid, pyrazinamide and ethambutol. All the combined formulations contained near to their stated drug contents. Replicate analyses confirmed the excellent precision of the drug analyses. Such methods are not only rapid to perform but should be practical in many Third World situations with relatively modest laboratory facilities.

Development of a multiparticulate system containing enteric-release mini-tablets of omeprazole

Directory of Open Access Journals (Sweden)

Volnei Jose Tondo Filho

2014-09-01

Full Text Available The main aim of this study was to develop a multiparticulate system containing mini-tablets of omeprazole formulated with an enteric polymer with pH-dependent solubility. Pre-formulation studies showed good flow and compaction capacity, leading to the production ofhigh quality mini-tablets. The mini-tablets were coated in a fluidized bed with hydroxypropylmethylcellulose /Eudragit(r L30D55 and packed into hard gelatin capsules. The dissolution profile showed gastro-resistance and zero-order kinetics. The dissolution profile for the formulation containing lactose as the diluent and coated with 12% (tablet weight gain of polymer was similar to that ofthe reference drug.

Effect Of Formulating Additives On The Properties Of Ibuprofen Tablets

African Journals Online (AJOL)

A study of the comparative effects of different formulating additives and film coating on the properties of ibuprofen tablets was made. The tested properties were hardeness (H), friability (F), the disintegration time (D) and dissolution characteristics of ibuprofen tablets. The hardeness, friability, the hardeness friability ratio ...

Tablet use in primary education: Adoption hurdles and attitude determinants

NARCIS (Netherlands)

van Deursen, Alexander Johannes Aloysius Maria; Ben Allouch, Soumaya; Ruijter, Laura P.

2016-01-01

In the Netherlands, six primary schools recently participated in a pilot program, creating an educational environment in which children use a tablet PC. In these six schools, two studies are conducted. The first study highlights the process by which primary schools adopted tablet PCs by means of

Colon Targeted Guar Gum Compression Coated Tablets of Flurbiprofen: Formulation, Development, and Pharmacokinetics

Science.gov (United States)

Bontha, Vijaya Kumar

2013-01-01

The rationale of the present study is to formulate flurbiprofen colon targeted compression coated tablets using guar gum to improve the therapeutic efficacy by increasing drug levels in colon, and also to reduce the side effects in upper gastrointestinal tract. Direct compression method was used to prepare flurbiprofen core tablets, and they were compression coated with guar gum. Then the tablets were optimized with the support of in vitro dissolution studies, and further it was proved by pharmacokinetic studies. The optimized formulation (F4) showed almost complete drug release in the colon (99.86%) within 24 h without drug loss in the initial lag period of 5 h (only 6.84% drug release was observed during this period). The pharmacokinetic estimations proved the capability of guar gum compression coated tablets to achieve colon targeting. The C max of colon targeted tablets was 11956.15 ng/mL at T max of 10 h whereas it was 15677.52 ng/mL at 3 h in case of immediate release tablets. The area under the curve for the immediate release and compression coated tablets was 40385.78 and 78214.50 ng-h/mL and the mean resident time was 3.49 and 10.78 h, respectively. In conclusion, formulation of guar gum compression coated tablets was appropriate for colon targeting of flurbiprofen. PMID:24260738

Development and evaluation of controlled-release buccoadhesive verapamil hydrochloride tablets

Directory of Open Access Journals (Sweden)

Emami J.

2008-05-01

Full Text Available Background and purpose of the study: Verapamil hydrochloride is a calcium channel blocker which is used in the control of supraventricular arrhythmia, hypertension and myocardial infraction. There are considerable inter-individual variations in serum concencentration of verpamil due to variation in the extent of hepatic metabolism. In this study controlled-release buccoadhesive tablets of verapamil hydrochloride (VPH were prepared in order to achieve constant plasma concentrations, to improve the bioavailability by the avoidance of hepatic first-pass metabolism, and to prevent frequent administration. Materials and methods: Tablets containing fixed amount of VPH were prepared by direct compression method using polymers like carbomer (CP, hydroxypropylmethyl cellulose (HPMC and sodium carboxymethyl cellulose (NaCMC in various combination and ratios and evaluated for thickness, weight variation, hardness, drug content uniformity, swelling, mucoadhesive strength, drug release and possible interaction between ingredients. Results: All tablets were acceptable with regard to thickness, weight variation, hardness, and drug content. The maximum bioadhesive strength was observed in tablets formulated with a combination of CP-NaCMC followed by CP-HPMC and NaCMC-HPMC.  Decreasing the content of CP in CP-HPMC tablets or NaCMC in CP-NaCMC or NaCMC-HPMC systems resulted in decrease in detachment forces. Lower release rates were observed by lowering the content of CP in CP-HPMC containing formulations or NaCMC in tablets which contained CP-NaCMC or NaCMC-HPMC. The release behavior was non-Fickian controlled by a combination of diffusion and chain relaxation mechanisms and best fitted zero-order kinetics. Conclusion: The buccoadhesive VPH tablets containing 53% CP and 13.3% HPMC showed suitable release kinetics (n = 0.78, K0 zero order release = 4.11 mg/h, MDT = 5.66 h and adhesive properties and did not show any interaction between polymers and drug based on

Effect of a disintegration mechanism on wetting, water absorption, and disintegration time of orodispersible tablets.

Science.gov (United States)

Pabari, Rm; Ramtoola, Z

2012-07-01

The aim of this study was to evaluate the influence of disintegration mechanism of various types of disintegrants on the absorption ratio (AR), wetting time (WT), and disintegration time (DT) of orodispersible tablets (ODTs). ODTs were prepared by direct compression using mannitol as filler and disintegrants selected from a range of swellable, osmotic, and porous disintegrants. Tablets formed were characterized for their water AR, WT, and DT. The porosity and mechanical strength of the tablets were also measured. Results show that the DT of formulated ODTs was directly related to the WT and was a function of the disintegration mechanism of the disintegrant used. The lowest WT and DT were observed for tablets formulated using the osmotic disintegrant sodium citrate and these tablets also showed the lowest AR and porosity. The wetting and disintegration of tablets containing the highly swellable disintegrant, sodium starch glycollate, was slowest despite their high water AR and high tablet porosity. Rapid wetting and disintegration of ODTs were therefore not necessarily related to the porosity of the tablets.

A Simple and Effective Physical Characteristic Profiling Method for Methamphetamine Tablet Seized in China.

Science.gov (United States)

Li, Tao; Hua, Zhendong; Meng, Xin; Liu, Cuimei

2018-03-01

Methamphetamine (MA) tablet production confers chemical and physical properties. This study developed a simple and effective physical characteristic profiling method for MA tablets with capital letter "WY" logos, which realized the discrimination between linked and unlinked seizures. Seventeen signature distances extracted from the "WY" logo were explored as factors for multivariate analysis and demonstrated to be effective to represent the features of tablets in the drug intelligence perspective. Receiver operating characteristic (ROC) curve was used to evaluate efficiency of different pretreatments and distance/correlation metrics, while "Standardization + Euclidean" and "Logarithm + Euclidean" algorithms outperformed the rest. Finally, hierarchical cluster analysis (HCA) was applied to the data set of 200 MA tablet seizures randomly selected from cases all around China in 2015, and 76% of them were classified into a group named after "WY-001." Moreover, the "WY-001" tablets occupied 51-80% tablet seizures from 2011 to 2015 in China, indicating the existence of a huge clandestine factory incessantly manufacturing MA tablets. © 2017 American Academy of Forensic Sciences.

Pharmacokinetics of a Prototype Formulation of Sublingual Testosterone and a Buspirone Tablet, Versus an Advanced Combination Tablet of Testosterone and Buspirone in Healthy Premenopausal Women

NARCIS (Netherlands)

Van Rooij, Kim; De Leede, Leo; Frijlink, Henderik W.; Bloemers, Jos; Poels, Saskia; Koppeschaar, Hans; Olivier, Berend; Tuiten, Adriaan

2014-01-01

The study aimed to compare the kinetics of two novel combination drug products for Female Sexual Interest/Arousal Disorder (FSIAD). Thirteen women received testosterone via the sublingual route followed 2.5 hours later by a buspirone tablet, versus a single combination tablet swallowed at once. The

Design and Evaluation of an Oral Floating Matrix Tablet of ...

African Journals Online (AJOL)

Purpose: To develop floating matrix tablets of salbutamol sulphate using ethyl cellulose and acrycoat S-100 as polymers, and sodium bicarbonate, citric acid and tartaric acid as gas generating agents. Methods: Twenty four formulations were prepared and segregated into four major categories, A to D. The floating tablets ...

The influence of granulating solvents on drug release from tablets ...

African Journals Online (AJOL)

... significantly lower than the other wet granulated tablets, but higher than the matrix tablets. The granulating solvent influenced the release of drug which increased with increase in the water content. Key Words: Grewia gum: Granulating solvents; Release mechanisms. Journal of Pharmacy and Bioresources Vol.1(1) 2004: ...

MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop

Science.gov (United States)

... responsivefull.html MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop To use the sharing features on ... provide a consistent user experience from a desktop, tablet, or phone. All users, regardless of how they ...

A critical Examination of the Phenomenon of Bonding Area - Bonding Strength Interplay in Powder Tableting.

Science.gov (United States)

Osei-Yeboah, Frederick; Chang, Shao-Yu; Sun, Changquan Calvin

2016-05-01

Although the bonding area (BA) and bonding strength (BS) interplay is used to explain complex tableting behaviors, it has never been experimentally proven. The purpose of this study is to unambiguously establish the distinct contributions of each by decoupling the contributions from BA and BS. To modulate BA, a Soluplus® powder was compressed into tablets at different temperatures and then broken following equilibration at 25°C. To modulate BS, tablets were equilibrated at different temperatures. To simultaneously modulate BA and BS, both powder compression and tablet breaking test were carried out at different temperatures. Lower tablet tensile strength is observed when the powder is compressed at a lower temperature but broken at 25°C. This is consistent with the increased resistance to polymer deformation at lower temperatures. When equilibrated at different temperatures, the tensile strength of tablets prepared under identical conditions increases with decreasing storage temperature, indicating that BS is higher at a lower temperature. When powder compression and tablet breaking are carried out at the same temperature, the profile with a maximum tensile strength at 4°C is observed due to the BA-BS interplay. By systematically varying temperature during tablet compression and breaking, we have experimentally demonstrated the phenomenon of BA-BS interplay in tableting.

Formulation and In Vitro, In Vivo Evaluation of Effervescent Floating Sustained-Release Imatinib Mesylate Tablet

Science.gov (United States)

Kadivar, Ali; Kamalidehghan, Behnam; Javar, Hamid Akbari; Davoudi, Ehsan Taghizadeh; Zaharuddin, Nurul Dhania; Sabeti, Bahareh; Chung, Lip Yong; Noordin, Mohamed Ibrahim

2015-01-01

Introduction Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT). Conventional imatinib mesylate (Gleevec) tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets. Methodology Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M), with Sodium alginate (SA) and Carbomer 934P (CP) as release-retarding polymers, sodium bicarbonate (NaHCO3) as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec) in 0.1 N HCl (pH 1.2) at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted. Results and Discussion Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO3 produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower Cmax and higher Tmax compared to the conventional tablet (Gleevec). Thus, formulated SR tablets preserved persistent

Formulation and in vitro, in vivo evaluation of effervescent floating sustained-release imatinib mesylate tablet.

Directory of Open Access Journals (Sweden)

Ali Kadivar

Full Text Available Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT. Conventional imatinib mesylate (Gleevec tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets.Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M, with Sodium alginate (SA and Carbomer 934P (CP as release-retarding polymers, sodium bicarbonate (NaHCO3 as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec in 0.1 N HCl (pH 1.2 at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted.Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO3 produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower Cmax and higher Tmax compared to the conventional tablet (Gleevec. Thus, formulated SR tablets preserved persistent concentration of plasma up to 24 hours

Learning, Tablet, Culture-Coherence?

Science.gov (United States)

Norqvist, Lars

2016-01-01

This paper presents understandings of learning in schools where Internet-enabled Information and Communication Technologies (ICTs) are taken for granted. The context is a full-scale 1:1 tablet project in Danish municipality schools where this study bring forward expressions of learning from one class (12-13 year old children) in order to offer…

A randomised trial of glucose tablets to aid smoking cessation.

Science.gov (United States)

West, Robert; May, Sylvia; McEwen, Andy; McRobbie, Hayden; Hajek, Peter; Vangeli, Eleni

2010-01-01

Oral glucose has been found to decrease tobacco craving among abstaining smokers. One study has demonstrated an effect of glucose on short-term abstinence. There is a need to examine any long-term benefit of glucose on abstinence. To assess whether glucose tablets improve 6-month continuous abstinence rates compared with low-calorie placebo tablets. Smokers attempting to stop (n = 928) were randomised to receive glucose or sorbitol (placebo) in a double-blind placebo-controlled trial. All participants received group-based psychological support, and approximately half (n = 474) received nicotine replacement therapy (NRT), buproprion, or both. Smokers were seen weekly for 5 weeks and used tablets ad libitum, with a recommended minimum of 12 per day. Participants were recruited through general practitioner referral, word of mouth, and advertising. The participants were 38% male, smoked an average of 23.5 cigarettes per day, and had a mean age of 44 years. There were no significant pretreatment differences between groups. The primary outcome measure was continuous, CO-verified abstinence from the target quit date for 6 months. No significant effect of glucose tablets on abstinence was found (14.6% vs 13.4% abstinence in the glucose and placebo groups, respectively). However, there was a significant interaction with a glucose effect observed in smokers also receiving other medication (18.2% vs 12.6%, p < 0.05) but not otherwise (10.7% vs 14.3% ; p < 0.05 for the interaction). No significant effect of glucose tablets over and above sweet tasting tablets could be detected overall, but the possibility of an effect as an adjunct to NRT or bupropion merits further investigation.

Tabletted guar gum microspheres of piroxicam for targeted adjuvant therapy for colonic adenocarcinomas.

Science.gov (United States)

Vats, Anima; Pathak, Kamla

2012-11-01

In recent years, nonsteroidal anti-inflammatory drugs have been found to be cogent as an adjuvant therapeutic agent in mitigating colorectal cancer. Thus, this present investigation was aimed to formulate an oral, targeted tablet of piroxicam microspheres for sustained and targeted adjuvant therapy for colonic adenocarcinomas. Crosslinked guar gum microspheres of piroxicam were directly compressed into matrix tablet and coated with Eudragit S100. The optimized tablet that displayed 0% release in simulated gastric fluid, 15% in simulated intestinal fluid and 97.1% in simulated colonic fluid underwent roentgenographic study in rabbits to check its safe transit to the colon. x-ray images revealed intactness of the tablet until it reached the colon where the tablet matrix eroded. The designed, conceptual formulation emerged as potential carrier for targeted adjuvant therapy of piroxicam.

Online consumer behavior: The tablet shopper – A new kind of customer?

OpenAIRE

Grohmann, Christopher

2014-01-01

Tablet computers are on the rise and are increasingly superseding stationary computers in terms of modern online shopping. This paper therefore aims on understanding how tablet and website characteristics might impact online consumer behavior. The collected data resulted from focus groups and in-depth interviews conducted with a technology affine audience. It has shown that tablets indeed may have shifted shopping behavior from utilitarian towards rather recreational attributes. Discuss...

Adolescents' struggles with swallowing tablets: barriers, strategies and learning.

Science.gov (United States)

Hansen, Dana Lee; Tulinius, Ditte; Hansen, Ebba Holme

2008-01-01

To explore adolescents' struggles with taking oral medications. Copenhagen, Denmark. Semi-structured qualitative interviews were conducted with 89 adolescents (33 boys, 56 girls) between the ages of 11 and 20. Adolescents were recruited through four public schools. To identify struggles with taking oral medication, interview transcripts were systematically searched for statements including the terms swallow, chew, crush and eat. Thematic analysis of the identified statements was carried out to reveal dominant themes in the adolescents' accounts. Over one-third of the adolescents spontaneously provided accounts of the difficulties they experienced with taking oral medications, especially with swallowing tablets. Three themes were dominant in their narratives: barriers, strategies and learning. Barriers experienced by the adolescents involved the medications' properties, e.g. taste. Adolescents developed strategies to overcome these barriers, e.g. crushing tablets. Via a process of learning-by-doing and the acquisition of increased experience and autonomy, many adolescents mastered the skill of swallowing tablets. Many adolescents experienced barriers in their attempts to swallow tablets. They developed various strategies to overcome these barriers and gradually mastered taking medicines in a learning-by-doing process.

Tablet PC Support of Students' Learning Styles

Directory of Open Access Journals (Sweden)

Shreya Kothaneth

2012-12-01

Full Text Available In the context of rapid technology development, it comes as no surprise that technology continues to impact the educational domain, challenging traditional teaching and learning styles. This study focuses on how students with different learning styles use instructional technology, and in particular, the tablet PC, to enhance their learning experience. The VARK model was chosen as our theoretical framework as we analyzed responses of an online survey, both from a quantitative and qualitative standpoint. Results indicate that if used correctly, the tablet PC can be used across different learning styles to enrich the educational experience.

A Tablet Computer for Young Children? Exploring Its Viability for Early Childhood Education

Science.gov (United States)

Couse, Leslie J.; Chen, Dora W.

2010-01-01

This study explored the viability of tablet computers in early education by investigating preschool children's ease in acclimating to tablet technology and its defectiveness in engaging them to draw. A total of 41 three- to six-year-old children were videotaped while they used the tablets. The study found significant differences in level of tablet…

Perspectives of Students on Acceptance of Tablets and Self-Directed Learning with Technology

Science.gov (United States)

Gokcearslan, Sahin

2017-01-01

Recent mobile learning technologies offer the opportunity for students to take charge of the learning process both inside and outside the classroom. One of these tools is the tablet PC (hereafter "tablet"). In parallel with increased access to e-content, the role of tablets in learning has recently begun to be examined. This study aims…

HUBUNGAN PENGETAHUAN IBU HAMIL TENTANG TABLET FE DENGAN KEJADIAN ANEMIA

Directory of Open Access Journals (Sweden)

Nila Eza Fitria

2018-03-01

Full Text Available Maternal Mortality Rate (MMR is one indicator of the success of health services in a country. Maternal deaths occur for several reasons, including anemia The purpose of this research is to know the relationship of knowledge of pregnant women with Fe tablet with anemia occurrence in jorong Koto Malintang Puskesmas Agam District 2014. This research is cross sectional research design conducted in Jorong Koto Malintang Puskesmas Kamih Agam on 23 s / d 29 August 2014. The sample in this study pregnant women in Jorong Koto Malintang 30 people. Univariate analysis has been done descriptive and bivariate analysis using chi-square test. The results showed 30 respondents classified as less knowledgeable (36.7% and more than half of pregnant women (63.3% suffered from anemia. The result of bivariate analysis with trust level 0,05 indicates a significant relationship between the existence of Knowledge about Tablet Fe Pregnancy with Genesis Anemia where value p = 0,002 (p = <0,05. Can be concluded in this research there is a significant relationship between mother's knowledge about Fe tablet with anemia. It is expected to improve the knowledge of pregnant women about the importance of Fe tablets consumed by pregnant women during pregnancy to prevent anemiaAngka Kematian Ibu (Maternal Mortality Rate / MMR merupakan salah satu indikator keberhasilan pelayanan kesehatan di suatu negara. Kematian ibu terjadi karena beberapa alasan, termasuk anemia. Tujuan penelitian ini adalah mengetahui hubungan pengetahuan ibu hamil dengan tablet Fe dengan kejadian anemia di jorong Koto Malintang Puskesmas Kabupaten Agam tahun 2014. Penelitian ini adalah rancangan penelitian cross sectional yang dilakukan di Jorong Koto Malintang Puskesmas Kamih Agam pada 23 s/d 29Agustus 2014. Sampel dalam penelitian ini ibu hamil di Jorong Koto Malintang 30 orang. Analisis univariat telah dilakukan analisis deskriptif dan bivariat menggunakan uji chi-square. Hasilnya menunjukkan 30 responden

Development and Characterization of Novel Floating-Mucoadhesive Tablets Bearing Venlafaxine Hydrochloride

Directory of Open Access Journals (Sweden)

Raghvendra Misra

2016-01-01

Full Text Available The present investigation is concerned about the development of floating bioadhesive drug delivery system of venlafaxine hydrochloride which after oral administration exhibits a unique combination of floating and bioadhesion to prolong gastric residence time and increase drug bioavailability within the stomach. The floating bioadhesive tablets were prepared by the wet granulation method using different ratios of hydroxypropyl methyl cellulose (HPMC K4MCR and Carbopol 934PNF as polymers. Sodium bicarbonate (NaHCO3 and citric acid were used as gas (CO2 generating agents. Tablets were characterized for floating properties, in vitro drug release, detachment force, and swelling index. The concentration of hydroxypropyl methyl cellulose and Carbopol 934PNF significantly affects the in vitro drug release, floating properties, detachment force, and swelling properties of the tablets. The optimized formulation showed the floating lag time 72±2.49 seconds and duration of floating 24.50±0.74 hr. The in vitro release studies and floating behavior were studied in simulated gastric fluid (SGF at pH 1.2. Different drug release kinetics models were also applied. The in vitro drug release from tablets was sufficiently sustained (more than 18 hr and the Fickian transports of the drug from the tablets were confirmed. The radiological evidence suggests that the tablets remained buoyant and altered position in the stomach of albino rabbit and mean gastric residence time was prolonged (more than > 6 hr.

Disintegration of highly soluble immediate release tablets: a surrogate for dissolution.

Science.gov (United States)

Gupta, Abhay; Hunt, Robert L; Shah, Rakhi B; Sayeed, Vilayat A; Khan, Mansoor A

2009-01-01

The purpose of the work was to investigate correlation between disintegration and dissolution for immediate release tablets containing a high solubility drug and to identify formulations where disintegration test, instead of the dissolution test, may be used as the acceptance criteria based on International Conference on Harmonization Q6A guidelines. A statistical design of experiments was used to study the effect of filler, binder, disintegrating agent, and tablet hardness on the disintegration and dissolution of verapamil hydrochloride tablets. All formulation variables, i.e., filler, binder, and disintegrating agent, were found to influence tablet dissolution and disintegration, with the filler and disintegrating agent exerting the most significant influence. Slower dissolution was observed with increasing disintegration time when either the filler or the disintegrating agent was kept constant. However, no direct corelationship was observed between the disintegration and dissolution across all formulations due to the interactions between different formulation components. Although all tablets containing sodium carboxymethyl cellulose as the disintegrating agent, disintegrated in less than 3 min, half of them failed to meet the US Pharmacopeia 30 dissolution criteria for the verapamil hydrochloride tablets highlighting the dependence of dissolution process on the formulation components other than the disintegrating agent. The results identified only one formulation as suitable for using the disintegration test, instead of the dissolution test, as drug product acceptance criteria and highlight the need for systematic studies before using the disintegration test, instead of the dissolution test as the drug acceptance criteria.

Development of fi lm forming formulation and technology of polymeric fi lm coating on Indotril tablets

Directory of Open Access Journals (Sweden)

L. I. Kucherenko

2013-09-01

Full Text Available Introduction. In previous researches we grounded expedience of «Indotril» tablets development; formulation and technology of "Indotril" tablet cores were developed. Received tablet cores should be covered by protective polymeric film with the purpose of unpleasant taste elimination, increase of tablets expiration date. Objective. The aim of our investigation was to develop the film forming composition and technology of polymeric film coating on «Indotril» tablets in pseudo-fluidized layer. Materials and Methods. As “Indotril” tablets cores should be covered by protective polymeric film we performed research designed to select efficient film forming solution. Thus modern filming agents were studied, besides such factors were investigated: concentration of film forming suspension, increase of tablet coat in mass, air temperature under gas distribution grid. Obtained tablets were checked according to pharmacopeia methods. Results and discussion. First we studied tablet compression force influence on main parameters of «Indotril» cores tablets: on crushing strength, abrasion in pseudo-fluidized layer unit and disintegration. Then for further investigation we chose «Indotril» cores tablets with crushing strength near 70 H, abrasion - up to 0,5% and disintegration time - not more than 10 minutes. We performed research to select film forming solution for covering “Indotril” tablets in pseudo-fluidized layer unit. As filming agents we used different samples of hydroxypropyl methylcellulose (HPMC by Japan company Shin-Etsu Chemical Co and English company Colorcon. Water HPMC solutions were prepared which contained plasticizer (propylene glycol, pigment (titanium IV dioxide and dye (tartrazine. Coating process of “Indotril” tablets was performed in laboratory pseudo-fluidized layer unit with the air temperature 75ºC under gas distribution grid. Variance analysis of experimental data on quality of coat surface showed insignificance as

21 CFR 520.1720a - Phenylbutazone tablets and boluses.

Science.gov (United States)

2010-04-01

... Section 520.1720a Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES...-mg or 1-g tablets, or 2- or 4-g boluses, in dogs and horses. (2) Nos. 000010 and 059130 for use of 100- or 200-mg or 1-g tablets in dogs and horses. (3) Nos. 000856 and 061623 for use of 100-mg or 1-g...

Tablet Computers on Trial: A Transformative Force in Education?

Science.gov (United States)

Kjartansdóttir, Skúlína Hlíf; Jakobsdóttir, Sólveig

2013-01-01

In this paper we present the results of an evaluation study of a development project for the introduction and use of tablet computers (iPads) at the lower secondary level in Nordlinga school, a compulsory school in Reykjavík. In the study, we assess the impact of the use of tablet computers on instruction and students' learning in grades 9 to 10,…

Ordinance on distribution of iodine tablets to the population

International Nuclear Information System (INIS)

1992-01-01

This Ordinance provides for the organization of supplies of iodine tablets to the population. The tablets will be held in case of occurrences that might endanger the population following an accident provoking the emission of radioactive iodine. The Federal Health Ministry is responsible for organizing the supply to the appropriate bodies for distribution to the population. The Ordinance entered into force on 1 August 1992. (NEA)

Formulation and Characterization of Oral Mucoadhesive Chlorhexidine Tablets Using Cordia myxa Mucilage.

Science.gov (United States)

Moghimipour, Eskandar; Aghel, Nasrin; Adelpour, Akram

2012-01-01

The dilution and rapid elimination of topically applied drugs due to the flushing action of saliva is a major difficulty in the effort to eradicate infections of oral cavity. Utilization a proper delivery system for incorporation of drugs has a major impact on drug delivery and such a system should be formulated for prolonged drug retention in oral cavity. The aim of the present study was the use of mucilage of Cordia myxa as a mucoadhesive material in production of chlorhexidine buccal tablets and its substitution for synthetic polymers such as HPMC. The influence of mucilage concentration on the physicochemical responses (hardness, friability, disintegration time, dissolution, swelling, and muco-adhesiveness strength) was studied and swelling of mucilage and HPMC were compared. The evaluated responses included pharmacopoeial characteristics of tablets, the force needed to separate tablets from mucosa, and the amount of water absorbed by tablets. In comparison to HPMC, the rise of mucilage concentration in the formulations increased disintegration time, drug dissolution rate, and reduced MDT. Also, compared to 30% HPMC, muco-adhesiveness strength of buccal tablets containing 20% mucilage was significantly higher. It can be concluded that the presence of Cordia myxa powdered mucilage may significantly affect the tablet characteristics, and increasing in muco-adhesiveness may be achieved by using 20% w/w mucilage.

MRI outcomes with cladribine tablets for multiple sclerosis in the CLARITY study.

Science.gov (United States)

Comi, Giancarlo; Cook, Stuart D; Giovannoni, Gavin; Rammohan, Kottil; Rieckmann, Peter; Sørensen, Per Soelberg; Vermersch, Patrick; Hamlett, Anthony C; Viglietta, Vissia; Greenberg, Steven J

2013-04-01

We herein provide a comprehensive assessment of magnetic resonance imaging (MRI) outcomes from CLARITY, a 96-week, double-blind study demonstrating significant clinical and MRI improvements in patients with relapsing-remitting multiple sclerosis (RRMS) treated with cladribine tablets. Patients with RRMS were randomized 1:1:1 to annual short-course therapy with cladribine tablets cumulative dose 3.5 or 5.25 mg/kg or placebo. MRI endpoints included mean number of T1 gadolinium-enhancing (Gd+), active T2 and combined unique (CU) lesions/patient/scan. MRI-measured disease activity was significantly reduced in both cladribine tablets groups versus placebo. The proportion of patients with no active lesions at study end was: T1 Gd+ lesions: 86.8 and 91.0 versus 48.3 % (p tablet groups when data were stratified by baseline disease characteristics. For example, the percentage of patients who remained lesion-free over the study was significantly greater in cladribine tablet groups than in the placebo group for all lesion types regardless of relapse category at baseline (p MRI-measured disease activity was greatly reduced by both doses of cladribine tablets, with consistent effect across clinically relevant patient populations. These findings add to our scientific understanding of the neurological impact of this therapeutic modality in patients with RRMS.

Using tablet technology in operational radiation safety applications.

Science.gov (United States)

Phillips, Andrew; Linsley, Mark; Houser, Mike

2013-11-01

Tablet computers have become a mainstream product in today's personal, educational, and business worlds. These tablets offer computing power, storage, and a wide range of available products to meet nearly every user need. To take advantage of this new computing technology, a system was developed for the Apple iPad (Apple Inc. 1 Infinite Loop Cupertino, CA 95014) to perform health and safety inspections in the field using editable PDFs and saving them to a database while keeping the process easy and paperless.

Older Adults Perceptions of Technology and Barriers to Interacting with Tablet Computers: A Focus Group Study.

Science.gov (United States)

Vaportzis, Eleftheria; Clausen, Maria Giatsi; Gow, Alan J

2017-10-04

New technologies provide opportunities for the delivery of broad, flexible interventions with older adults. Focus groups were conducted to: (1) understand older adults' familiarity with, and barriers to, interacting with new technologies and tablets; and (2) utilize user-engagement in refining an intervention protocol. Eighteen older adults (65-76 years old; 83.3% female) who were novice tablet users participated in discussions about their perceptions of and barriers to interacting with tablets. We conducted three separate focus groups and used a generic qualitative design applying thematic analysis to analyse the data. The focus groups explored attitudes toward tablets and technology in general. We also explored the perceived advantages and disadvantages of using tablets, familiarity with, and barriers to interacting with tablets. In two of the focus groups, participants had previous computing experience (e.g., desktop), while in the other, participants had no previous computing experience. None of the participants had any previous experience with tablet computers. The themes that emerged were related to barriers (i.e., lack of instructions and guidance, lack of knowledge and confidence, health-related barriers, cost); disadvantages and concerns (i.e., too much and too complex technology, feelings of inadequacy, and comparison with younger generations, lack of social interaction and communication, negative features of tablets); advantages (i.e., positive features of tablets, accessing information, willingness to adopt technology); and skepticism about using tablets and technology in general. After brief exposure to tablets, participants emphasized the likelihood of using a tablet in the future. Our findings suggest that most of our participants were eager to adopt new technology and willing to learn using a tablet. However, they voiced apprehension about lack of, or lack of clarity in, instructions and support. Understanding older adults' perceptions of technology

Latent structure analysis in the pharmaceutical process of tablets prepared by wet granulation.

Science.gov (United States)

Uehara, Naoto; Hayashi, Yoshihiro; Mochida, Hiroshi; Otoguro, Saori; Onuki, Yoshinori; Obata, Yasuko; Takayama, Kozo

2016-01-01

Granule characteristics are some of the important intermediate qualities that determine tablet properties. However, the relationships between granule and tablet characteristics are poorly understood. The aim of this study was to elucidate relationships among formulation factors, granule characteristics, and tablet properties using a non-linear response surface method (RSM) incorporating a thin-plate spline interpolation (RSM-S) and a Bayesian network (BN). Tablets containing lactose (Lac), cornstarch (CS), and microcrystalline cellulose (MCC) were prepared by wet granulation. Ten formulations were prepared by an extreme vertices design. The angle of repose (Y 1 ), compressibility (Y 2 ), cohesion force (Y 3 ), internal friction angle (Y 4 ), and mean particle size (Y 5 ) were measured as granule characteristics. Tensile strength (TS) and disintegration time (DT) were measured as tablet properties. RSM-S results showed that TS increased with increasing amounts of MCC and Lac. DT decreased with increasing amounts of MCC and CS. The optimal BN models were predicted using four evaluation indices -Y 3 was shown to be the most important factor for TS, whereas Y 2 , Y 3 , and Y 4 were relatively important for predicting DT. Moreover, tablets with excellent tablet properties (i.e. high TS and low DT) were produced by relatively high Y 1 , low Y 2 , high Y 3 , high Y 4 , and middle Y 5 values, and resulted from the middle of MCC, middle-to-low CS, low Lac, and middle-to-low magnesium stearate (Mg-St) amounts. The RSM-S and BN techniques are useful for revealing complex relationships among formulation factors, granule characteristics, and tablet properties.

Suppressed Release of Clarithromycin from Tablets by Crystalline Phase Transition of Metastable Polymorph Form I.

Science.gov (United States)

Fujiki, Sadahiro; Watanabe, Narumi; Iwao, Yasunori; Noguchi, Shuji; Mizoguchi, Midori; Iwamura, Takeru; Itai, Shigeru

2015-08-01

The pharmaceutical properties of clarithromycin (CAM) tablets containing the metastable form I of crystalline CAM were investigated. Although the dissolution rate of form I was higher than that of stable form II, the release of CAM from form I tablet was delayed. Disintegration test and liquid penetration test showed that the disintegration of the tablet delayed because of the slow penetration of an external solution into form I tablet. Investigation by scanning electron microscopy revealed that the surface of form I tablet was covered with fine needle-shaped crystals following an exposure to the external solution. These crystals were identified as form IV crystals by powder X-ray diffraction. The phenomenon that CAM releases from tablet was inhibited by fine crystals spontaneously formed on the tablet surface could be applied to the design of sustained-release formulation systems with high CAM contents by minimizing the amount of functional excipients. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Characterization of the coating and tablet core roughness by means of 3D optical coherence tomography.

Science.gov (United States)

Markl, Daniel; Wahl, Patrick; Pichler, Heinz; Sacher, Stephan; Khinast, Johannes G

2018-01-30

This study demonstrates the use of optical coherence tomography (OCT) to simultaneously characterize the roughness of the tablet core and coating of pharmaceutical tablets. OCT is a high resolution non-destructive and contactless imaging methodology to characterize structural properties of solid dosage forms. Besides measuring the coating thickness, it also facilitates the analysis of the tablet core and coating roughness. An automated data evaluation algorithm extracts information about coating thickness, as well as tablet core and coating roughness. Samples removed periodically from a pan coating process were investigated, on the basis of thickness and profile maps of the tablet core and coating computed from about 480,000 depth measurements (i.e., 3D data) per sample. This data enables the calculation of the root mean square deviation, the skewness and the kurtosis of the assessed profiles. Analyzing these roughness parameters revealed that, for the given coating formulation, small valleys in the tablet core are filled with coating, whereas coarse features of the tablet core are still visible on the final film-coated tablet. Moreover, the impact of the tablet core roughness on the coating thickness is analyzed by correlating the tablet core profile and the coating thickness map. The presented measurement method and processing could be in the future transferred to in-line OCT measurements, to investigate core and coating roughness during the production of film-coated tablets. Copyright © 2017. Published by Elsevier B.V.

Tablet Effervescent Ekstrak Belimbing Wuluh (Averrhoa bilimbi L. Dengan Variasi Kadar Pemanis Aspartam

Directory of Open Access Journals (Sweden)

Rosmala Dewi

2014-08-01

Full Text Available Averrhoa bilimbi is a fruit with many benefits but its usage is not optimal. The aim of the research was to get formulation of effervescent granule and tablet containing dry Averrhoa bilimbi extract with modified concentration of aspartame as sweetening agent for commercial healthy drink. Granules and tablets were produced with dry method granulation with relative humidity (RH of 40% and temperature of 25ºC. Three formulations were made and qualified as effervescent granules and tablets. Favorite tests showed that there was no significant differences of appearances and tastes for those three effervescent granules and tablets.

Esophageal transit and in vivo disintegration of branded risedronate sodium tablets and two generic formulations of alendronic acid tablets: a single-center, single-blind, six-period crossover study in healthy female subjects.

Science.gov (United States)

Perkins, Alan C; Blackshaw, P Elaine; Hay, Peter D; Lawes, Simon C; Atherton, Clare T; Dansereau, Richard J; Wagner, Leigh K; Schnell, Dan J; Spiller, Robin C

2008-05-01

Delayed esophageal transit or disintegration of oral bisphosphonate tablets before they enter the stomach may be of concern with respect to iatrogenic complications among patients receiving longterm treatment. Different formulations of generic bisphosphonate tablets meeting regulatory requirements may have substantial differences in pharmaceutical attributes from the branded product that may result in different characteristics during esophageal transit. The primary objective of this study was to evaluate and compare esophageal transit times and in vivo disintegration of 3 bisphosphonate formulations, one branded and the others generic, that are commercially available in Canada and the United Kingdom. This was a single-center, randomized, singleblind, 6-period crossover study in healthy postmenopausal women aged >50 years. Each subject received a single oral dose of a branded risedronate sodium 35-mg tablet and 2 generic formulations of alendronic acid 70-mg tablets (Novopharm Limited, Toronto, Canada, and Teva UK Limited, Morley, United Kingdom) in both the erect and semisupine (45 degrees ) positions. Although the products are labeled to be taken in the erect position, the semisupine position was included to simulate dosing in bedridden patients. Subjects took tablets with 30 mL of water in the morning after an overnight fast. The tablets were radiolabeled with technetium-99m ion-exchange resins to enable visualization and measurement of esophageal transit time and disintegration using a gamma camera. Dynamic scintigraphic images were obtained for a total of 10 minutes: 2 images per second for the first 30 seconds and 1 image every 15 seconds for 9.5 minutes. This was a mechanistic study and tolerability was not assessed. The study was conducted in 20 healthy white female subjects with a mean age of 62 years (range, 51-77 years). The effect of body position was statistically significant (P = 0.043), with the estimated hazard ratio (HR) of 0.74 indicating longer

78 FR 66009 - Determination That INVEGA (Paliperidone) Extended-Release Tablet, 12 Milligrams, Was Not...

Science.gov (United States)

2013-11-04

...] Determination That INVEGA (Paliperidone) Extended-Release Tablet, 12 Milligrams, Was Not Withdrawn From Sale for... Food and Drug Administration (FDA) has determined that INVEGA (paliperidone) extended-release tablet...-release tablet, 12 mg, if all other legal and regulatory requirements are met. FOR FURTHER INFORMATION...

Plasticisation of amylodextrin by moisture : Consequences for drug release from tablets

NARCIS (Netherlands)

Steendam, Rob; Eissens, Anco C.E.; Frijlink, Henderik W.; Lerk, Coenraad F.

2000-01-01

Moisture influences the consolidation behaviour of amylodextrin powders and the porosity and mechanical strength of compacts thereof. The aim of this study is to relate moisture content and compact properties to drug release characteristics of amylodextrin tablets. Therefore, amylodextrin tablets

Mini-tablets versus pellets as promising multiparticulate modified release delivery systems for highly soluble drugs.

Science.gov (United States)

Gaber, Dina M; Nafee, Noha; Abdallah, Osama Y

2015-07-05

Whether mini-tablets (tablets, diameters ≤6mm) belong to single- or multiple-unit dosage forms is still questionable. Accordingly, Pharmacopoeial evaluation procedures for mini-tablets are lacking. In this study, the aforementioned points were discussed. Moreover, their potential for oral controlled delivery was assessed. The antidepressant venlafaxine hydrochloride (Vx), a highly soluble drug undergoing first pass effect, low bioavailability and short half-life was selected as a challenging payload. In an attempt to weigh up mini-tablets versus pellets as multiparticulate carriers, Vx-loaded mini-tablets were compared to formulated pellets of the same composition and the innovator Effexor(®)XR pellets. Formulations were prepared using various polymer hydrogels in the core and ethyl cellulose film coating with increasing thickness. Mini-tablets (diameter 2mm) showed extended Vx release (<60%, 8h). Indeed, release profiles comparable to Effexor(®)XR pellets were obtained. Remarkably higher coating thickness was required for pellets to provide equivalent retardation. Ethyl cellulose in the core ensured faster release due to polymer migration to the surface and pore formation in the coat. mini-tablets showed higher stability to pellets upon storage. Industrially speaking, mini-tablets proved to be superior to pellets in terms of manufacturing, product quality and economical aspects. Results point out the urgent need for standardized evaluation procedures for mini-tablets. Copyright © 2015. Published by Elsevier B.V.

A New Application of Lipid Nanoemulsions as Coating Agent, Providing Zero-Order Hydrophilic Drug Release from Tablets

Directory of Open Access Journals (Sweden)

Nicolas Anton

2012-01-01

Full Text Available The objective of the present investigation was to evaluate potential of nanoemulsions as a coating material for the tablets. The nanoemulsion of size less than 100 nm was prepared using a simple and low-energy spontaneous emulsification method. Conventional tablets containing theophylline as a model hydrophilic drug were prepared. The theophylline tablets were coated with the nanoemulsion using a fluid bed coater. The effect of different levels of the nanoemulsion coating on the theophylline release was evaluated. The theophylline tablets containing different levels of the nanoemulsion coating could be successfully prepared. Interestingly, the coating of tablet with the nanoemulsion resulted in zero-order release of theophylline from the tablets. The noncoated theophylline tablets release the entire drug in less than 2 minutes, whereas nanoemulsion coating delayed the release of theophylline from tablets. This investigation establishes the proof of concept for the potential of nanoemulsions as a coating material for tablets.

The effect of sucralfate tablets vs. suspension on oral doxycycline absorption in dogs.

Science.gov (United States)

KuKanich, K; KuKanich, B

2015-04-01

The purpose of this study was to determine the effect of concurrent sucralfate (tablet or suspension) on doxycycline pharmacokinetics and to determine the effects of delaying sucralfate by 2 h on doxycycline absorption. Five dogs were included in a crossover study receiving: doxycycline alone; doxycycline concurrently with sucralfate tablet; doxycycline followed 2 h by sucralfate tablet; doxycycline concurrently with sucralfate suspension; and doxycycline followed 2 h by sucralfate suspension. Doxycycline plasma concentrations were evaluated with liquid chromatography with mass spectrometry. No interaction was seen when sucralfate was administered as a tablet. Sucralfate tablet fragments were frequently observed in some dogs' feces. The area under the curve (AUC) and maximum plasma concentration (CMAX ) were significantly lower (P < 0.001) in the concurrent sucralfate suspension group (AUC 7.2 h·μg/mL, CMAX 0.43 μg/mL) than with doxycycline alone (AUC 36.0 h·μg/mL, CMAX 2.53 μg/mL) resulting in a relative bioavailability of 20%. Delaying sucralfate suspension by 2 h after doxycycline administration resulted in no difference in doxycycline absorption as compared with doxycycline administration alone with a relative bioavailability of 74%. The lack of an interaction with sucralfate tablets suggests sucralfate should be administered as a suspension rather than tablet in dogs. © 2014 John Wiley & Sons Ltd.

Spectrum of tablet computer use by medical students and residents at an academic medical center

Directory of Open Access Journals (Sweden)

Robert Robinson

2015-07-01

Full Text Available Introduction. The value of tablet computer use in medical education is an area of considerable interest, with preliminary investigations showing that the majority of medical trainees feel that tablet computers added value to the curriculum. This study investigated potential differences in tablet computer use between medical students and resident physicians.Materials & Methods. Data collection for this survey was accomplished with an anonymous online questionnaire shared with the medical students and residents at Southern Illinois University School of Medicine (SIU-SOM in July and August of 2012.Results. There were 76 medical student responses (26% response rate and 66 resident/fellow responses to this survey (21% response rate. Residents/fellows were more likely to use tablet computers several times daily than medical students (32% vs. 20%, p = 0.035. The most common reported uses were for accessing medical reference applications (46%, e-Books (45%, and board study (32%. Residents were more likely than students to use a tablet computer to access an electronic medical record (41% vs. 21%, p = 0.010, review radiology images (27% vs. 12%, p = 0.019, and enter patient care orders (26% vs. 3%, p < 0.001.Discussion. This study shows a high prevalence and frequency of tablet computer use among physicians in training at this academic medical center. Most residents and students use tablet computers to access medical references, e-Books, and to study for board exams. Residents were more likely to use tablet computers to complete clinical tasks.Conclusions. Tablet computer use among medical students and resident physicians was common in this survey. All learners used tablet computers for point of care references and board study. Resident physicians were more likely to use tablet computers to access the EMR, enter patient care orders, and review radiology studies. This difference is likely due to the differing educational and professional demands placed on

[Current situations and problem analysis of influencing factors of traditional Chinese medicine tablets on forming quality].

Science.gov (United States)

Li, Yan-Nian; Wu, Zhen-Feng; Wan, Na; Li, Yuan-Hui; Li, Hui-Ting; Yang, Ming

2018-04-01

The compressibility of tablets is the essential operating unit during the preparation of traditional Chinese medicine tablets, as well as a complicated process. Therefore, it is of great significance to comprehensively study the influencing factors on the formation process. This paper aimed to review the evaluation methods for the tablet forming quality and highlight the effects of material powder properties, excipients and preparation technology on the quality of traditional Chinese medicine tablets on the basis of relevant literatures. Furthermore, the common problems in tablet forming process are also analyzed to provide useful references for the development of tablet forming quality of traditional Chinese medicines. Copyright© by the Chinese Pharmaceutical Association.

Growth of potassium niobate micro-hexagonal tablets with monoclinic phase and its excellent piezoelectric property

Science.gov (United States)

Chen, Zhong; Huang, Jingyun; Wang, Ye; Yang, Yefeng; Wu, Yongjun; Ye, Zhizhen

2012-09-01

Potassium niobate micro-hexagonal tablets were synthesized through hydrothermal reaction with KOH, H2O and Nb2O5 as source materials by using a polycrystalline Al2O3 as substrate. X-ray diffraction, Raman spectra and selected area electron diffraction analysis results indicated that the tablets exhibit monoclinic phase structure and are highly crystallized. Meanwhile, piezoelectric property of the micro-hexagonal tablets was investigated. The as-synthesized tablets exhibit excellent piezoactivities in the experiments, and an effective piezoelectric coefficient of around 80 pm/V was obtained. The tablets have huge potential applications in micro/nano-integrated piezoelectric and optical devices.

Magnetic resonance imaging and X-ray microtomography studies of a gel-forming tablet formulation.

Science.gov (United States)

Laity, P R; Mantle, M D; Gladden, L F; Cameron, R E

2010-01-01

The capabilities of two methods for investigating tablet swelling are investigated, based on a study of a model gel-forming system. Results from magnetic resonance imaging (MRI) were compared with results from a novel application of X-ray microtomography (XmicroT) to track the movements of embedded glass microsphere tracers as the model tablets swelled. MRI provided information concerning the movement of hydration fronts into the tablets and the composition of the swollen gel layer, which formed at the tablet surface and progressively thickened with time. Conversely, XmicroT revealed significant axial expansion within the tablet core, at short times and ahead of the hydration fronts, where there was insufficient water to be observed by MRI (estimated to be around 15% by weight for the system used here). Thus, MRI and XmicroT may be regarded as complementary methods for studying the hydration and swelling behaviour of tablets. Copyright 2009 Elsevier B.V. All rights reserved.

Tablet Use in Primary Education: Adoption Hurdles and Attitude Determinants

Science.gov (United States)

van Deursen, Alexander J. A. M.; ben Allouch, Somaya; Ruijter, Laura P.

2016-01-01

In the Netherlands, six primary schools recently participated in a pilot program, creating an educational environment in which children use a tablet PC. In these six schools, two studies are conducted. The first study highlights the process by which primary schools adopted tablet PCs by means of interviews based on diffusion of innovation theory.…

Seaweed tablet: a natural source of iodine

International Nuclear Information System (INIS)

Briones, Annabelle V.; Ambal, Wilhelmina O.; Monroyo, Evangelina C.; Bonifacio, Teresita S.; Sison, Fe M.

1997-01-01

Species of seaweeds namely: Halymenia durvillaei, Laurencia flexilis and Sargassum gigantifolium were processed into dried form and formulated as tablet. Prior to tablet formulation, the seaweeds were assayed for iodine and trace elements. The seaweeds that exhibited significance values of iodine and trace elements were further analyzed for the presence of heavy metals followed by acute oral toxicity test (LD 50 ). Among the seaweeds evaluated, H. durvilaei was found to contain high level of iodine (0.255% w/w) and magnesium (1.65% w/w) with sufficient amount of zinc (25.69 ppm) and phosporous (11.68 ppm). Analysis of heavy metals showed minute amount of mercury (0.0055 ppm), cadmium (0.67 ppm) and lead (1.80 ppm). The median lethal dose (LD 50 ) of H. durvillaei administered orally in Swiss male mice is 119.1489 ± 4.9873 g/kg. Tablet formulation was based on the U.S. recommended daily allowance of 0.15 mg. of iodine per adult and children. The final product was comparable to imported Kelp pills (available in the local market) in terms of physical properties and iodine content. (Author)

Bridging the Divide: Using UTAUT to predict multigenerational tablet adoption practices.

Science.gov (United States)

Magsamen-Conrad, Kate; Upadhyaya, Shrinkhala; Joa, Claire Youngnyo; Dowd, John

2015-09-01

This study examined the "Unified Theory of Acceptance and Use of Technology" (UTAUT) in the context of tablet devices across multiple generations. We tested the four UTAUT determinants, performance expectancy, effort expectancy, social influence, and facilitating conditions, to determine their contributions for predicting behavioral intention to use tablets with age, gender, and user experience as moderators. 899 respondents aged 19-99 completed the survey. We found consistent generational differences in UTAUT determinants, most frequently between the oldest and youngest generations. Effort expectancy and facilitating conditions were the only determinants that positively predicted tablet use intentions after controlling for age, gender, and tablet use. We also discuss the implications of ageism and gender discrimination of technology adoption. Finally, we argue that our findings can be extended to create effective training programs for the teaching, learning, and adoption of new technologies in a variety of organizational settings.

Relationship between diffusivity of water molecules inside hydrating tablets and their drug release behavior elucidated by magnetic resonance imaging.

Science.gov (United States)

Kikuchi, Shingo; Onuki, Yoshinori; Kuribayashi, Hideto; Takayama, Kozo

2012-01-01

We reported previously that sustained release matrix tablets showed zero-order drug release without being affected by pH change. To understand drug release mechanisms more fully, we monitored the swelling and erosion of hydrating tablets using magnetic resonance imaging (MRI). Three different types of tablets comprised of polyion complex-forming materials and a hydroxypropyl methylcellulose (HPMC) were used. Proton density- and diffusion-weighted images of the hydrating tablets were acquired at intervals. Furthermore, apparent self-diffusion coefficient maps were generated from diffusion-weighted imaging to evaluate the state of hydrating tablets. Our findings indicated that water penetration into polyion complex tablets was faster than that into HPMC matrix tablets. In polyion complex tablets, water molecules were dispersed homogeneously and their diffusivity was relatively high, whereas in HPMC matrix tablets, water molecule movement was tightly restricted within the gel. An optimal tablet formulation determined in a previous study had water molecule penetration and diffusivity properties that appeared intermediate to those of polyion complex and HPMC matrix tablets; water molecules were capable of penetrating throughout the tablets and relatively high diffusivity was similar to that in the polyion complex tablet, whereas like the HPMC matrix tablet, it was well swollen. This study succeeded in characterizing the tablet hydration process. MRI provides profound insight into the state of water molecules in hydrating tablets; thus, it is a useful tool for understanding drug release mechanisms at a molecular level.

Novel levocetirizine HCl tablets with enhanced palatability: synergistic effect of combining taste modifiers and effervescence technique

Science.gov (United States)

Labib, Gihan S

2015-01-01

Objectives Levocetirizine HCl, a second-generation piperazine derivative and H1-selective antihistaminic agent, possesses few side effects. The first objective of the study was to compare and evaluate the taste-masking effect of different ratios of 2-hydroxypropyl-β-cyclodextrin and mannitol on levocetirizine HCl using an inclusion complex and solid dispersion, respectively. The second objective was to study the possibility of preparing and evaluating effervescent tablets from the best-chosen taste-masked blends for the purpose of their use either as orodispersible tablets or as water-soluble effervescent tablets, according to patients’ will. Materials and methods Prepared taste-masked blends were prepared and subjected to palatability, Fourier-transform infrared spectroscopy, and differential scanning calorimetry studies. Tablets containing different percentages of effervescent mixtures were prepared by direct compression on the selected taste-modified blends. Evaluation tests were conducted, including flowability and compressibility on the precompressed blends and hardness, friability, wetting time, effervescent time, in vitro, in vivo disintegration time, and in vitro dissolution study on the compressed tablets. Formulated tablets were evaluated and compared to marketed orodispersible tablets for mouth feel and palatability. Results All prepared tablets showed convenient physical and palatability properties compared to the selected brand. The in vitro drug-release study revealed fast release of levocetirizine HCl within 5 minutes from all prepared tablets. Conclusion Levocetirizine HCl effervescent tablets are likely to increase patient compliance with drug administration. Moreover, the use of these effervescent tablets in an orodispersible dosage form can improve oral drug bioavailability and act as an attractive pediatric dosage form. PMID:26379426

Validating the Accuracy of Reaction Time Assessment on Computer-Based Tablet Devices.

Science.gov (United States)

Schatz, Philip; Ybarra, Vincent; Leitner, Donald

2015-08-01

Computer-based assessment has evolved to tablet-based devices. Despite the availability of tablets and "apps," there is limited research validating their use. We documented timing delays between stimulus presentation and (simulated) touch response on iOS devices (3rd- and 4th-generation Apple iPads) and Android devices (Kindle Fire, Google Nexus, Samsung Galaxy) at response intervals of 100, 250, 500, and 1,000 milliseconds (ms). Results showed significantly greater timing error on Google Nexus and Samsung tablets (81-97 ms), than Kindle Fire and Apple iPads (27-33 ms). Within Apple devices, iOS 7 obtained significantly lower timing error than iOS 6. Simple reaction time (RT) trials (250 ms) on tablet devices represent 12% to 40% error (30-100 ms), depending on the device, which decreases considerably for choice RT trials (3-5% error at 1,000 ms). Results raise implications for using the same device for serial clinical assessment of RT using tablets, as well as the need for calibration of software and hardware. © The Author(s) 2015.

Hot-stage microscopy for determination of API particles in a formulated tablet.

Science.gov (United States)

Simek, Michal; Grünwaldová, Veronika; Kratochvíl, Bohumil

2014-01-01

Although methods exist to readily determine the particle size distribution (PSD) of an active pharmaceutical ingredient (API) before its formulation into a final product, the primary challenge is to develop a method to determine the PSD of APIs in a finished tablet. To address the limitations of existing PSD methods, we used hot-stage microscopy to observe tablet disintegration during temperature change and, thus, reveal the API particles in a tablet. Both mechanical and liquid disintegration were evaluated after we had identified optimum milling time for mechanical disintegration and optimum volume of water for liquid disintegration. In each case, hot-stage micrographs, taken before and after the API melting point, were compared with image analysis software to obtain the PSDs. Then, the PSDs of the APIs from the disintegrated tablets were compared with the PSDs of raw APIs. Good agreement was obtained, thereby confirming the robustness of our methodology. The availability of such a method equips pharmaceutical scientists with an in vitro assessment method that will more reliably determine the PSD of active substances in finished tablets.

Hot-Stage Microscopy for Determination of API Particles in a Formulated Tablet

Directory of Open Access Journals (Sweden)

Michal Šimek

2014-01-01

Full Text Available Although methods exist to readily determine the particle size distribution (PSD of an active pharmaceutical ingredient (API before its formulation into a final product, the primary challenge is to develop a method to determine the PSD of APIs in a finished tablet. To address the limitations of existing PSD methods, we used hot-stage microscopy to observe tablet disintegration during temperature change and, thus, reveal the API particles in a tablet. Both mechanical and liquid disintegration were evaluated after we had identified optimum milling time for mechanical disintegration and optimum volume of water for liquid disintegration. In each case, hot-stage micrographs, taken before and after the API melting point, were compared with image analysis software to obtain the PSDs. Then, the PSDs of the APIs from the disintegrated tablets were compared with the PSDs of raw APIs. Good agreement was obtained, thereby confirming the robustness of our methodology. The availability of such a method equips pharmaceutical scientists with an in vitro assessment method that will more reliably determine the PSD of active substances in finished tablets.

Is online information on ecstasy tablet content safe?

Science.gov (United States)

Vrolijk, Ruben Q; Brunt, Tibor M; Vreeker, Annabel; Niesink, Raymond J M

2017-01-01

In recent years, the prevalence of ecstasy use has increased in most European countries. Users can acquire information on ecstasy tablet composition through the internet. This study compares online information from two websites, Pillreports and Partyflock, to the validated Dutch Drugs Information and Monitoring System (DIMS) database, and aims to measure its accuracy and potential danger or value. The drug-related information posted on Pillreports.net and Partyflock.nl between 1 January 2014 and 31 December 2015 was investigated for accuracy and several information characteristics such as picture inclusion and dose range inclusion. In total, 471 informatory statements on ecstasy tablet content were analysed relative to the Dutch ecstasy market. Informatory statements on the content of specific ecstasy tablets were scored as 'too high' or 'too low' if their concentrations deviated > 10 mg from the entries in the DIMS database within a 12-week time-frame, and scored as 'dangerous' if their concentration was > 40 mg too low. Unreported substances were scored as 'dangerous' if listed as an illegal or dangerous substance in the DIMS database and if present in relevant quantities. Also scored were the report characteristics 'picture inclusion', 'spread inclusion' and 'website source', which were tested for their association with report safety/danger. On average, reports on ecstasy tablets from Pillreports and Partyflock show concentrations which are 10.6 mg too high [95% confidence interval (CI) = 6.7-14.4]. Qualitatively, 39.7% of the reports scored as 'too high' (95% CI = 35.2-44.4), 17.6% scored as 'too low' (95% CI = 14.0-21.2) and 15.5% had 'unreported substances' (95% CI = 12.3-18.9), resulting overall in 15.3% of the reports being scored as 'dangerous' (95% CI = 11.9-18.5). The report characteristic 'spread inclusion' associated inversely with report danger [Exp(b) = 0.511, 95% CI = 0.307-0.850, P = 0.01]. Information from the popular

Tablets in English Class: Students' Activities Surrounding Online Dictionary Work

Science.gov (United States)

Bunting, Leona

2015-01-01

Tablets have become increasingly popular among young people in Sweden and this rapid increase also resonates in school, especially in classrooms for younger children. The aim of the present study is to analyze and describe how the students deal with the open instructions for a task of using online dictionaries on tablets. Specific focus is on how…

Students' Opinions on the Use of Tablet Computers in Education

Science.gov (United States)

Duran, Muharrem; Aytaç, Tufan

2016-01-01

One of the most important tools for the integration of ICT in education, especially with tablet computers, has been employed in Turkey through the FATIH Project. This study aimed to determine students' views on the use of tablet computers in learning and teaching processes. Eighty-four first-year high school students studying at three schools in…

Effect of antacids in didanosine tablet on bioavailability of isoniazid.

OpenAIRE

Gallicano, K; Sahai, J; Zaror-Behrens, G; Pakuts, A