Multigeneration Inheritance through Fertile XX Carriers of an NR0B1 (DAX1 Locus Duplication in a Kindred of Females with Isolated XY Gonadal Dysgenesis

Directory of Open Access Journals (Sweden)

Michela Barbaro

2012-01-01

Full Text Available A 160 kb minimal common region in Xp21 has been determined as the cause of XY gonadal dysgenesis, if duplicated. The region contains the MAGEB genes and the NR0B1 gene; this is the candidate for gonadal dysgenesis if overexpressed. Most patients present gonadal dysgenesis within a more complex phenotype. However, few independent cases have recently been described presenting with isolated XY gonadal dysgenesis caused by relatively small NR0B1 locus duplications. We have identified another NR0B1 duplication in two sisters with isolated XY gonadal dysgenesis with an X-linked inheritance pattern. We performed X-inactivation studies in three fertile female carriers of three different small NR0B1 locus duplications identified by our group. The carrier mothers did not show obvious skewing of X-chromosome inactivation, suggesting that NR0B1 overexpression does not impair ovarian function. We furthermore emphasize the importance to investigate the NR0B1 locus also in patients with isolated XY gonadal dysgenesis.

Testicular dysgenesis syndrome and the development and occurrence of male reproductive disorders

DEFF Research Database (Denmark)

Virtanen, H E; Rajpert-De Meyts, E; Main, K M

2005-01-01

links so that countries with high incidence of testicular cancer, such as Denmark, tend to also have high prevalence rates of cryptorchidism and hypospadias and poor semen quality. Vice versa, in countries with good male reproductive health, e.g., in Finland, all these aspects are better than in Denmark...... the most severe form of testicular dysgenesis syndrome (TDS). We have hypothesized that testicular cancer, cryptorchidism, hypospadias and poor spermatogenesis are all signs of a developmental disturbance that was named as testicular dysgenesis syndrome. The hypothesis is based on clinical...... and epidemiological findings and on biological and experimental evidence. Signs of TDS share several risk factors, such as small birth weight (particularly being small for gestational age), and they are risk factors for each other. All of them have background in fetal development. They show strong epidemiological...

Dysgenesie spenique et syndrome d'ivemark | Balaka | Journal de la ...

African Journals Online (AJOL)

The authors report a Togolese case of splenic dysgenesis associating in a boy aged of 6 years: a splenic hypoplasia, a median and hypertrophic liver, an abdominal aorta and an inferior vena cava all both situated at the right side of the backbone, a dextrocardia by dextroversion, a single auricle and a complete type of ...

A rare case of 46,XX gonadal dysgenesis and Mayer-Rokitansky-Kuster-Hauser syndrome.

Science.gov (United States)

Manne, Sriharibabu; Veeraabhinav, C H; Jetti, Mounica; Himabindu, Yalamanchali; Donthu, Kiranmai; Badireddy, Mutyalarayudu

2016-01-01

46,XX gonadal dysgenesis is a rare genetically heterogeneous disorder characterized by underdeveloped ovaries with consequent, impuberism, primary amenorrhea, and hypergonadotropic hypogonadism. Mullerian agenesis or Mayer-Rokitansky-Kuster-Hauser (MRKH) syndrome is characterized by congenital aplasia of the uterus and the upper part (2/3) of the vagina in a woman with normal development of secondary sexual characteristics and a normal 46,XX karyotype. The phenotypic manifestations of MRKH syndrome may sometimes overlap with various other syndromes and require accurate delineation. The coexistence of both these disorders is extremely rare. Here, we report a case of 46,XX gonadal dysgenesis and MRKH syndrome with anatomically dispersed congenital anomalies unique among reported cases.

Environment, testicular dysgenesis and carcinoma in situ testis

DEFF Research Database (Denmark)

Olesen, Inge A; Sonne, Si Brask; Hoei-Hansen, Christina E

2007-01-01

The testicular dysgenesis syndrome (TDS) hypothesis proposes that a proportion of the male reproductive disorders-cryptorchidism, hypospadias, infertility and testicular cancer-may be symptoms of one underlying developmental disease, TDS, which is most likely a result of disturbed gonadal...... range of phenotypes: from the mildest and most common form, in which impaired spermatogenesis is the only symptom, to the most severe cases, in which the patient may develop testicular cancer. It is of great importance that clinicians in different specialties treating patients with TDS are aware...

Testicular dysgenesis syndrome and the development and occurrence of male reproductive disorders

International Nuclear Information System (INIS)

Virtanen, H.E.; Rajpert-De Meyts, E.; Main, K.M.; Skakkebaek, N.E.; Toppari, J.

2005-01-01

Patients with 45,X0/46XY karyotype often present with intersex phenotype and testicular dysgenesis. These patients may also have undescended testes (cryptorchidism), hypospadias and their spermatogenesis is severely disrupted. They have a high risk for testicular cancer. These patients have the most severe form of testicular dysgenesis syndrome (TDS). We have hypothesized that testicular cancer, cryptorchidism, hypospadias and poor spermatogenesis are all signs of a developmental disturbance that was named as testicular dysgenesis syndrome. The hypothesis is based on clinical and epidemiological findings and on biological and experimental evidence. Signs of TDS share several risk factors, such as small birth weight (particularly being small for gestational age), and they are risk factors for each other. All of them have background in fetal development. They show strong epidemiological links so that countries with high incidence of testicular cancer, such as Denmark, tend to also have high prevalence rates of cryptorchidism and hypospadias and poor semen quality. Vice versa, in countries with good male reproductive health, e.g., in Finland, all these aspects are better than in Denmark. Although genetic abnormalities can cause these disorders, in the majority of cases, the reasons remain unclear. Adverse trends in the incidence of male reproductive disorders suggest that environmental and life style factors contribute to the problem. Endocrine disrupters are considered as prime candidates for environmental influence. Fetal exposure to high doses of dibutyl phthalate was shown to cause a TDS-like phenotype in the rats. Studies are underway to assess whether there is any exposure-outcome relation with selected chemicals (persistent organic pollutants, pesticides, phthalates) and cryptorchidism

Corpus callosum dysgenesis and lipoma: embryologic and magnetic resonance imaging aspects; Disgenesia do corpo caloso e lipoma: consideracoes embriologicas basicas e aspectos de imagem a ressonancia magnetica

Energy Technology Data Exchange (ETDEWEB)

Abreu Junior, Luiz de; Borri, Maria Lucia; Wolosker, Angela Maria Borri; Hartmann, Luiz Guilherme de Carvalho; Galvao Filho, Mario de Melo [Hospital e Maternidade Sao Luiz, Sao Paulo, SP (Brazil). Setor de Diagnostico por Imagem]. E-mail: abreujr@directnet.com.br; D' Ippolito, Giuseppe [Hospital e Maternidade Sao Luiz, Sao Paulo, SP (Brazil). Setor de US/TC/RMN

2005-07-15

The corpus callosum is the major system of association fibers that permits communication of both cerebral hemispheres. Magnetic resonance imaging has improved the study of brain malformations, including the corpus callosum dysgenesis. Lipoma is a common finding in the spectrum of corpus callosum dysgenesis. The purpose of these study was to review the embryologic events and the magnetic resonance imaging aspects related to the corpus callosum dysgenesis and to the formation of the related lipoma. (author)

Testicular dysgenesis syndrome: possible role of endocrine disrupters

DEFF Research Database (Denmark)

Bay, Katrine; Asklund, Camilla; Skakkebaek, Niels E

2006-01-01

. Clinically, the most common manifestation of TDS is probably a reduced sperm concentration, whereas the more severe form may include a high risk of testis cancer. Clinicians should be aware of the interconnection between the different features of TDS, and inclusion of a programme for early detection......The testicular dysgenesis syndrome (TDS) hypothesis proposes that the four conditions cryptorchidism, hypospadias, impaired spermatogenesis and testis cancer may all be manifestations of disturbed prenatal testicular development. The TDS hypothesis is based on epidemiological, clinical...... of testis cancer in the management of infertile men with poor semen quality is recommended....

Testicular dysgenesis syndrome: possible role of endocrine disrupters

DEFF Research Database (Denmark)

Bay, Katrine; Asklund, Camilla; Skakkebaek, Niels E

2006-01-01

The testicular dysgenesis syndrome (TDS) hypothesis proposes that the four conditions cryptorchidism, hypospadias, impaired spermatogenesis and testis cancer may all be manifestations of disturbed prenatal testicular development. The TDS hypothesis is based on epidemiological, clinical....... Clinically, the most common manifestation of TDS is probably a reduced sperm concentration, whereas the more severe form may include a high risk of testis cancer. Clinicians should be aware of the interconnection between the different features of TDS, and inclusion of a programme for early detection...... of testis cancer in the management of infertile men with poor semen quality is recommended....

[Relationship between phthalates and testicular dysgenesis syndrome].

Science.gov (United States)

Chen, Guo-Rong; Dong, Lei; Ge, Ren-Shan; Hardy, Matthew P

2007-03-01

Recent epidemiological evidence demonstrates that boys born to women exposed to phthalates during pregnancy have an increased incidence of cryptorchidism, hypospadias, testicular cancer and spermatogenic dysfunction, which are collectively referred to as testicular dysgenesis syndrome (TDS). TDS may be attributed to the dysfunction of Leydig cells and Sertoli cells during their differentiation after exposure to phthalates in utero. Fox example, Leydig cell functions are significantly affected by phthalates, leading to the decrease of two Leydig cell products--insulin-like growth factor 3 (INSL3) and testosterone, which are critical factors for testis descent. The disorientation of Leydig cells and Sertoli cells in the adult testis may be the cause of spermatogenic dysfunction.

Histological evidence of testicular dysgenesis in contralateral biopsies from 218 patients with testicular germ cell cancer

DEFF Research Database (Denmark)

Hoei-Hansen, Christina E; Holm, Mette; Rajpert-De Meyts, Ewa

2003-01-01

dysgenesis, microscopic dysgenetic features were quantified in contralateral testicular biopsies in patients with a testicular germ cell tumour. Two hundred and eighty consecutive contralateral testicular biopsies from Danish patients with testicular cancer diagnosed in 1998-2001 were evaluated...... retrospectively. Two hundred and eighteen specimens were subsequently included in this study, after 63 patients who did not meet inclusion criteria had to be excluded. The presence of carcinoma in situ (which is believed to originate from transformed gonocytes) was detected in 8.7% of biopsies. The incidence...... patients, areas with immature and morphologically distorted tubules were also noted. Spermatogenesis was qualitatively normal in 51.4%, whereas 11.5% had very poor or absent spermatogenesis. It is concluded that microscopic testicular dysgenesis is a frequent feature in contralateral biopsies from patients...

MRI Findings of Coexistence of Ectopic Neurohypophysis, Corpus Callosum Dysgenesis, and Periventricular Neuronal Heterotopia

Directory of Open Access Journals (Sweden)

Harun Arslan

2014-01-01

Full Text Available Ectopic neurohypophysis is a pituitary gland abnormality, which can accompany growth hormone deficiency associated with dwarfism. Here we present magnetic resonance imaging (MRI findings of a rare case of ectopic neurohypophysis, corpus callosum dysgenesis, and periventricular neuronal heterotopia coexisting, with a review of the literature.

Phthalate-induced testicular dysgenesis syndrome: Leydig cell influence.

Science.gov (United States)

Hu, Guo-Xin; Lian, Qing-Quan; Ge, Ren-Shan; Hardy, Dianne O; Li, Xiao-Kun

2009-04-01

Phthalates, the most abundantly produced plasticizers, leach out from polyvinyl chloride plastics and disrupt androgen action. Male rats that are exposed to phthalates in utero develop symptoms characteristic of the human condition referred to as testicular dysgenesis syndrome (TDS). Environmental influences have been suspected to contribute to the increasing incidence of TDS in humans (i.e. cryptorchidism and hypospadias in newborn boys and testicular cancer and reduced sperm quality in adult males). In this review, we discuss the recent findings that prenatal exposure to phthalates affects Leydig cell function in the postnatal testis. This review also focuses on the recent progress in our understanding of how Leydig cell factors contribute to phthalate-mediated TDS.

Tata Laksana Kasus Perempuan dengan Pure Gonadal Dysgenesis 46, XY (Sindrom Swyer

Directory of Open Access Journals (Sweden)

Kanadi Sumapradja

2016-06-01

Full Text Available Disorders of sex development (DSD adalah kelainan medis yang dikaitkan dengan ketidakcocokan antara kromosom, gonad dan fenotip. Sindrom Swyer adalah kelainan berupa disgenesis gonad 46,XY dan diikuti dengan tidak terjadinya pelepasan anti-mullerian hormone (AMH dari gonad yang mengalami disgenesis sehingga mengakibatkan berkembangnya duktus muller menjadi uterus. Keadaan tersebut mengakibatkan pasien mengeluh amenorea primer dan organ seks sekunder tidak berkembang. Orientasi gender umumnya adalah sebagai perempuan, karena kurangnya paparan hormon androgen terhadap otak. Tatalaksana kasus Disorders of sex development (DSD sangat mementingkan pasien (patient-centered sehingga tatalaksana medikamentosa maupun pembedahan harus berdasarkan pemahaman pasien terhadap orientasi gendernya. Pada makalah ini dilaporkan kasus sindrom swyer pada seorang perempuan usia 29 tahun dengan keluhan amenorea primer. Hasil analisis kromosom 46,XY (20 metafase dengan hormon follicle stimulating hormone (FSH 31.5miu/ml, luteinizing hormone (LH 10.8miu/ml, estradiol (E2 <5pg/ml, testosteron total (T <0.0025ng/ml. Tatalaksana medikamentosa adalah memberikan terapi hormon estrogen untuk membantu proses feminisasi. Karena risiko tinggi terjadinya tumor pada kasus disgenesis gonad intra-abdomen dengan kromosom Y, maka direncanakan tindakan gonadektomi. Kata kunci: Tatalaksana, Sindrom Swyer, pure gonadal dysgenesis Case Management of Pure Gonadal Dysgenesis 46, XY (Sindrom Swyer Abstract Disorders of sex development (DSD are medical conditions in which the development of chromosomal, gonadal or anatomic sex varies from normal and may be incongruent with each other. Swyer syndrome is a condition caused by pure gonadal dysgenesis 46,XY, which followed by inadequate anti-mullerian (AMH production results in maintenance and further development of mullerian duct into uterus. Therefore, many patients who suffer from this condition initially come with chief complaint of primary

Cryptorchidism as part of the testicular dysgenesis syndrome: the environmental connection

DEFF Research Database (Denmark)

Main, K M; Skakkebaek, N E; Toppari, J

2009-01-01

Cryptorchidism is part of the testicular dysgenesis syndrome (TDS), which includes other male reproductive disorders such as hypospadias, testis cancer and reduced semen quality. These diseases appear to be linked by common pathogenic mechanisms, interfering with normal fetal testis development. ...... and maternal smoking during pregnancy also appeared to be a risk factor for cryptorchidism. Thus, current evidence suggests that the development of the male reproductive tract may be susceptible to adverse effects of environmental hormone disrupters....

Hypoparathyroidism, sensorineural deafness, and renal dysgenesis syndrome with a mutation

Directory of Open Access Journals (Sweden)

Yong Suk Shim

2015-03-01

Full Text Available Hypoparathyroidism, sensorineural deafness, and renal dysgenesis syndrome is an autosomal dominant disease caused by mutations in the GATA3 gene on chromosome 10p15. We identified a patient diagnosed with hypoparathyroidism who also had a family history of hypoparathyroidism and sensorineural deafness, present in the father. The patient was subsequently diagnosed and found to be a heterozygote for an insertion mutation c.255_256ins4 (GTGC in exon 2 of GATA3. His father was also confirmed to have the same mutation in GATA3.

Dislocation climb models from atomistic scheme to dislocation dynamics

OpenAIRE

Niu, Xiaohua; Luo, Tao; Lu, Jianfeng; Xiang, Yang

2016-01-01

We develop a mesoscopic dislocation dynamics model for vacancy-assisted dislocation climb by upscalings from a stochastic model on the atomistic scale. Our models incorporate microscopic mechanisms of (i) bulk diffusion of vacancies, (ii) vacancy exchange dynamics between bulk and dislocation core, (iii) vacancy pipe diffusion along the dislocation core, and (iv) vacancy attachment-detachment kinetics at jogs leading to the motion of jogs. Our mesoscopic model consists of the vacancy bulk dif...

Microscopic dysgerminoma associated with anti-Ma2 paraneoplastic encephalitis in a patient with gonadal dysgenesis.

Science.gov (United States)

Abdulkader, Marwah M; Yousef, Mohammad M; Abdelhadi, Mohamad K; Amr, Samir S; Alabsi, Eyad S; Al-Abbadi, Mousa A

2013-05-01

We present a 27-yr-old female with gonadal dysgenesis (46, XY), who presented to our hospital with poor consciousness, aphasia, restlessness, and visual hallucination. Physical examination revealed normal breast development and normal external female genetalia. Computed tomography scan of the head and neck revealed the presence of brain edema, hydrocephalous, and a localized hypodense lesion in the hypothalamus. Her serum was positive for the anti-Ma2, which is associated with paraneoplastic encephalitis syndrome. Computed tomography of the abdomen revealed the presence of a 7.5×5.3×3.0 cm solid pelvic mass. Interestingly, a single microscopic focus of dysgerminoma was identified in a background of stromal fibrosis and focal dystrophic calcifications. No ovarian stroma or testicular tissue was identified. To our knowledge, this is the first case of gonadal dysgenesis presenting with anti-Ma2 paraneoplastic encephalitis with dysgerminoma. A discussion about paraneoplastic encephalitis with a microscopic dysgerminoma associated with anti-Ma2 antibody is presented.

Interaction of 〈1 0 0〉 dislocation loops with dislocations studied by dislocation dynamics in α-iron

Energy Technology Data Exchange (ETDEWEB)

Shi, X.J.; Dupuy, L. [CEA, DEN, SRMA, F-91191 Gif-sur-Yvette (France); Devincre, B. [Laboratoire d’Etude des Microstructures, CNRS-ONERA, 29 av. de la Division Leclerc, 92322 Châtillon Cedex (France); Terentyev, D. [SCK–CEN, Nuclear Materials Science Institute, Boeretang 200, B-2400 Mol (Belgium); Vincent, L. [CEA, DEN, SRMA, F-91191 Gif-sur-Yvette (France)

2015-05-15

Highlights: • Interactions between edge dislocations and radiation-induced loops were studied by dislocation dynamics. • Dislocation dynamics results are directly compared to molecular dynamics results. • The complex elementary reactions are successfully reproduced. • The critical shear stress to overcome individual loops if reproduced quantitatively. - Abstract: Interstitial dislocation loops with Burgers vector of 〈1 0 0〉 type are formed in α-iron under neutron or heavy ion irradiation. As the density and size of these loops increase with radiation dose and temperature, these defects are thought to play a key role in hardening and subsequent embrittlement of iron-based steels. The aim of the present work is to study the pinning strength of the loops on mobile dislocations. Prior to run massive Dislocation Dynamics (DD) simulations involving experimentally representative array of radiation defects and dislocations, the DD code and its parameterization are validated by comparing the individual loop–dislocation reactions with those obtained from direct atomistic Molecular Dynamics (MD) simulations. Several loop–dislocation reaction mechanisms are successfully reproduced as well as the values of the unpinning stress to detach mobile dislocations from the defects.

Sleep spindle activity in double cortex syndrome: a case report.

Science.gov (United States)

Sforza, Emilia; Marcoz, Jean-Pierre; Foletti, Giovanni

2010-09-01

Cortical dysgenesis is increasingly recognised as a cause of epilepsy. We report a case with double cortex heterotopia and secondarily generalized seizures with a generalised spike wave pattern. During the course of the disease, the child developed electrical status epilepticus in slow wave sleep. From the first examination, sleep pattern revealed increased frequency and amplitude of spindle activity, more evident in anterior areas. The role of the thalamocortical pathway in increased sleep spindle activity is discussed with emphasis on the possible role of altered thalamocortical pathways in abnormal cortical migration. A strong suspicion of cortical dysgenesis may therefore be based on specific EEG sleep patterns.

Spontaneous resorption of sub-retinal cortical lens material

Directory of Open Access Journals (Sweden)

Salil S Gadkari

2014-01-01

Full Text Available We report a rare case of retained sub-retinal cortical material, which underwent spontaneous resorption. Patient presented with a left eye traumatic retinal detachment with a large retinal tear and posteriorly dislocated cataractous lens. Vitrectomy, lensectomy, silicone oil injection, and endolaser were performed. A good visual result was achieved. The report draws attention to this condition and highlights possible technique for minimizing risk of this complication in similar cases.

Multiple non-cell-autonomous defects underlie neocortical callosal dysgenesis in Nfib-deficient mice

Directory of Open Access Journals (Sweden)

Sunn Nana

2009-12-01

Full Text Available Abstract Background Agenesis of the corpus callosum is associated with many human developmental syndromes. Key mechanisms regulating callosal formation include the guidance of axons arising from pioneering neurons in the cingulate cortex and the development of cortical midline glial populations, but their molecular regulation remains poorly characterised. Recent data have shown that mice lacking the transcription factor Nfib exhibit callosal agenesis, yet neocortical callosal neurons express only low levels of Nfib. Therefore, we investigate here how Nfib functions to regulate non-cell-autonomous mechanisms of callosal formation. Results Our investigations confirmed a reduction in glial cells at the midline in Nfib-/- mice. To determine how this occurs, we examined radial progenitors at the cortical midline and found that they were specified correctly in Nfib mutant mice, but did not differentiate into mature glia. Cellular proliferation and apoptosis occurred normally at the midline of Nfib mutant mice, indicating that the decrease in midline glia observed was due to deficits in differentiation rather than proliferation or apoptosis. Next we investigated the development of callosal pioneering axons in Nfib-/- mice. Using retrograde tracer labelling, we found that Nfib is expressed in cingulate neurons and hence may regulate their development. In Nfib-/- mice, neuropilin 1-positive axons fail to cross the midline and expression of neuropilin 1 is diminished. Tract tracing and immunohistochemistry further revealed that, in late gestation, a minor population of neocortical axons does cross the midline in Nfib mutants on a C57Bl/6J background, forming a rudimentary corpus callosum. Finally, the development of other forebrain commissures in Nfib-deficient mice is also aberrant. Conclusion The formation of the corpus callosum is severely delayed in the absence of Nfib, despite Nfib not being highly expressed in neocortical callosal neurons. Our

[Elbow dislocation].

Science.gov (United States)

de Pablo Márquez, B; Castillón Bernal, P; Bernaus Johnson, M C; Ibañez Aparicio, N M

Elbow dislocation is the most frequent dislocation in the upper limb after shoulder dislocation. Closed reduction is feasible in outpatient care when there is no associated fracture. A review is presented of the different reduction procedures. Copyright © 2017 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España, S.L.U. All rights reserved.

Subtalar dislocation

International Nuclear Information System (INIS)

El-Khoury, G.Y.; Yousefzadeh, D.K.; Mulligan, G.M.; Moore, T.E.

1982-01-01

Over a period of three years we have seen nine patients with subtalar dislocation, all of whom sustained violent trauma to the region of the ankle and hind foot. All but one patient were males. Clinically a subtalar dislocation resembles a complicated fracture dislocation of the ankle but a definitive diagnosis can only be made radiographically. The mechanism of injury and radiographic features of this injury are discussed. (orig.)

Estimation of dislocations density and distribution of dislocations during ECAP-Conform process

Science.gov (United States)

Derakhshan, Jaber Fakhimi; Parsa, Mohammad Habibi; Ayati, Vahid; Jafarian, Hamidreza

2018-01-01

Dislocation density of coarse grain aluminum AA1100 alloy (140 µm) that was severely deformed by Equal Channel Angular Pressing-Conform (ECAP-Conform) are studied at various stages of the process by electron backscattering diffraction (EBSD) method. The geometrically necessary dislocations (GNDs) density and statistically stored dislocations (SSDs) densities were estimate. Then the total dislocations densities are calculated and the dislocation distributions are presented as the contour maps. Estimated average dislocations density for annealed of about 2×1012 m-2 increases to 4×1013 m-2 at the middle of the groove (135° from the entrance), and they reach to 6.4×1013 m-2 at the end of groove just before ECAP region. Calculated average dislocations density for one pass severely deformed Al sample reached to 6.2×1014 m-2. At micrometer scale the behavior of metals especially mechanical properties largely depend on the dislocation density and dislocation distribution. So, yield stresses at different conditions were estimated based on the calculated dislocation densities. Then estimated yield stresses were compared with experimental results and good agreements were found. Although grain size of material did not clearly change, yield stress shown intensive increase due to the development of cell structure. A considerable increase in dislocations density in this process is a good justification for forming subgrains and cell structures during process which it can be reason of increasing in yield stress.

Modified technique of the treatment for proximal tibiofibular joint dislocation

Directory of Open Access Journals (Sweden)

Gvozdenović Nemanja

2017-01-01

Full Text Available Introduction. Dislocation of the proximal tibiofibular joint (PTFJ is a rare injury. The diagnosis requires an accurate history of the mechanism and symptoms of the injury, and adequate clinical and radiographic evaluation of both knees. In the literature there is no larger series, only several cases of PTFJ dislocation treated by different methods have been published so far. The aim of the study was to present a modified technique for the treatment of the unstable PTFJ that results in faster recovery of the patient. Case report. A 24-year-old football player was injured at the beginning of training; when tackling the ball he felt a sharp pain in his right knee. He was immediately brought to the Emergency Center of Vojvodina and diagnosed with anterolateral dislocation of the PTFJ. Close reduction in general anesthesia was tried but we failed and then open reduction and internal fixation (ORIF were performed with a single three cortical screw. We preferred not to immobilise the knee after the procedure and immediately employed passive and active exercises in the knee, without bearing weight to the injured leg. After 6 weeks we removed the screw and gave full weight support to the leg and continued physical treatment. Conclusion. In case of acute PTFJ dislocation, the first method of choice is closed reduction in sedation or general anesthesia. If closed reduction fails, ORIF must be performed. ORIF without immobilization and early start of physical therapy lead to the rapid return to sports activities

Hybrid Dysgenesis in DROSOPHILA MELANOGASTER: Nature and Inheritance of P Element Regulation

OpenAIRE

Kidwell, Margaret G.

1985-01-01

The genetic determination of the control of resistance or susceptibility to germ line changes mediated by P elements was studied in two strains and in derivatives of crosses between them. One strain, characterized as true M, completely lacked P elements. The second strain, pseudo- M (M'), carried a number of P elements, but these did not have the potential to induce the gonadal sterility that is associated with P-M hybrid dysgenesis. Individuals from the true M strain were invariably unable ...

Dislocation-dynamics method

International Nuclear Information System (INIS)

Van Brutzel, L.

2015-01-01

Dislocation-Dynamics (DD) technique is identified as the method able to model the evolution of material plastic properties as a function of the microstructural transformation predicted at the atomic scale. Indeed, it is the only simulation method capable of taking into account the collective behaviour of a large number of dislocations inside a realistic microstructure. DD simulations are based on the elastic dislocation theory following rules inherent to the dislocation core structure often call 'local rules'. All the data necessary to establish the local rules for DD have to come directly from experiment or alternatively from simulations carried out at the atomic scale such as molecular dynamics or ab initio calculations. However, no precise information on the interaction between two dislocations or between dislocations and defects induced by irradiation are available for nuclear fuels. Therefore, in this article the DD technique will be presented and some examples are given of what can be achieved with it. (author)

Perilunate Dislocation

Directory of Open Access Journals (Sweden)

John Jiao

2016-09-01

Full Text Available History of present illness: A 25-year-old female presented to the emergency department with left wrist pain following a fall off a skateboard. The patient fell on her outstretched left wrist with the wrist dorsiflexed and reported immediate sharp pain to her left wrist that was worse with movement. She denied other trauma. Significant findings: In the left lateral wrist x-ray, the lunate (outlined in blue is dislocated from the rest of the wrist bones (yellow line but still articulates with the radius (red line. The capitate (yellow line does not sit within the distal articulation of the lunate and is displaced dorsally. Additionally, a line drawn through the radius and lunate (green line fails to intersect with the capitate. This is consistent with a perilunate dislocation. This is compared to a lunate dislocation, where the lunate itself is displaced and turned ventrally (spilled teacup and the proximal aspect does not articulate with the radius. Discussion: A perilunate dislocation is a significant closed wrist injury that is easily missed on standard anterior-posterior imaging. These dislocations are relatively rare, involving only 7% of all carpal injuries and are associated with high-energy trauma onto a hyperextended wrist, such as falls from a height, motor vehicle accidents, and sports injuries.1 An untreated perilunate dislocation is associated with high risk of chronic carpal instability and post-traumatic arthritis. If the mechanism of injury is sufficient to suspect perilunate dislocation, multiple radiographic views of the wrist should be ordered. Patients should receive prompt orthopedic consultation for open reduction and ligamentous repair. Even after successful identification and subsequent surgical repair, median nerve neuropathy and post-traumatic arthritis are frequent.2-3

Persistent Corneal Decompensation due to Anterior Dislocation of Soemmering Ring Cataract

Directory of Open Access Journals (Sweden)

Travis Peck

2017-01-01

Full Text Available Purpose. We present a case of a patient with Soemmering ring after cataract surgery and a potential complication that can arise as a result of its presence. Observations. A patient with history of ruptured globe status after repair and lensectomy, complicated by aphakic secondary open angle glaucoma, was referred for management of second injury to the same eye. This injury resulted in Soemmering ring dislocation into the anterior chamber. The cortical material caused a significant increase in intraocular pressure and corneal decompensation. Surgical removal of the Soemmering ring and Ahmed glaucoma tube implant was performed with control of intraocular pressures; however corneal edema could not be reversed. Conclusions and Importance. This case report illustrates the serious consequences that can be caused by Soemmering rings without early surgical intervention. Care must be taken to completely remove cortical material during cataract surgery to prevent their formation.

Dislocation-induced stress in polycrystalline materials: mesoscopic simulations in the dislocation density formalism

Science.gov (United States)

Berkov, D. V.; Gorn, N. L.

2018-06-01

In this paper we present a simple and effective numerical method which allows a fast Fourier transformation-based evaluation of stress generated by dislocations with arbitrary directions and Burgers vectors if the (site-dependent) dislocation density is known. Our method allows the evaluation of the dislocation stress using a rectangular grid with shape-anisotropic discretization cells without employing higher multipole moments of the dislocation interaction coefficients. Using the proposed method, we first simulate the stress created by relatively simple non-homogeneous distributions of vertical edge and so-called ‘mixed’ dislocations in a disk-shaped sample, which is necessary to understand the dislocation behavior in more complicated systems. The main part of our research is devoted to the stress distribution in polycrystalline layers with the dislocation density rapidly varying with the distance to the layer bottom. Considering GaN as a typical example of such systems, we investigate dislocation-induced stress for edge and mixed dislocations, having random orientations of Burgers vectors among crystal grains. We show that the rapid decay of the dislocation density leads to many highly non-trivial features of the stress distributions in such layers and study in detail the dependence of these features on the average grain size. Finally we develop an analytical approach which allows us to predict the evolution of the stress variance with the grain size and compare analytical predictions with numerical results.

Canonical Quantization of Crystal Dislocation and Electron-Dislocation Scattering in an Isotropic Media

Science.gov (United States)

Li, Mingda; Cui, Wenping; Dresselhaus, M. S.; Chen, Gang; MIT Team; Boston College Team

Crystal dislocations govern the plastic mechanical properties of materials but also affect the electrical and optical properties. However, a fundamental and decent quantum-mechanical theory of dislocation remains undiscovered for decades. Here we present an exact and manageable Hamiltonian theory for both edge and screw dislocation line in an isotropic media, where the effective Hamiltonian of a single dislocation line can be written in a harmonic-oscillator-like form, with closed-form quantized 1D phonon-like excitation. Moreover a closed-form, position dependent electron-dislocation coupling strength is obtained, from which we obtained good agreement of relaxation time when comparing with classical results. This Hamiltonian provides a platform to study the effect of dislocation to materials' non-mechanical properties from a fundamental Hamiltonian level.

"Conjugate channeling" effect in dislocation core diffusion: carbon transport in dislocated BCC iron.

Science.gov (United States)

Ishii, Akio; Li, Ju; Ogata, Shigenobu

2013-01-01

Dislocation pipe diffusion seems to be a well-established phenomenon. Here we demonstrate an unexpected effect, that the migration of interstitials such as carbon in iron may be accelerated not in the dislocation line direction ξ, but in a conjugate diffusion direction. This accelerated random walk arises from a simple crystallographic channeling effect. c is a function of the Burgers vector b, but not ξ, thus a dislocation loop possesses the same everywhere. Using molecular dynamics and accelerated dynamics simulations, we further show that such dislocation-core-coupled carbon diffusion in iron has temperature-dependent activation enthalpy like a fragile glass. The 71° mixed dislocation is the only case in which we see straightforward pipe diffusion that does not depend on dislocation mobility.

Distribution of distances between dislocations in different types of dislocation substructures in deformed Cu-Al alloys

Energy Technology Data Exchange (ETDEWEB)

Trishkina, L., E-mail: trishkina.53@mail.ru; Zboykova, N.; Koneva, N., E-mail: koneva@tsuab.ru; Kozlov, E. [Tomsk State University of Architecture and Building, 2 Solyanaya St., Tomsk, 634003 (Russian Federation); Cherkasova, T. [Tomsk State University of Architecture and Building, 2 Solyanaya St., Tomsk, 634003 (Russian Federation); National Research Tomsk Polytechnic University, 50 Lenin Ave., Tomsk, 634050 (Russian Federation)

2016-01-15

The aim of the investigation was the determination of the statistic description of dislocation distribution in each dislocation substructures component forming after different deformation degrees in the Cu-Al alloys. The dislocation structures were investigated by the transmission diffraction electron microscopy method. In the work the statistic description of distance distribution between the dislocations, dislocation barriers and dislocation tangles in the deformed Cu-Al alloys with different concentration of Al and test temperature at the grain size of 100 µm was carried out. It was established that the above parameters influence the dislocation distribution in different types of the dislocation substructures (DSS): dislocation chaos, dislocation networks without disorientation, nondisoriented and disoriented cells, in the walls and inside the cells. The distributions of the distances between dislocations in the investigated alloys for each DSS type formed at certain deformation degrees and various test temperatures were plotted.

Distribution of distances between dislocations in different types of dislocation substructures in deformed Cu-Al alloys

Science.gov (United States)

Trishkina, L.; Cherkasova, T.; Zboykova, N.; Koneva, N.; Kozlov, E.

2016-01-01

The aim of the investigation was the determination of the statistic description of dislocation distribution in each dislocation substructures component forming after different deformation degrees in the Cu-Al alloys. The dislocation structures were investigated by the transmission diffraction electron microscopy method. In the work the statistic description of distance distribution between the dislocations, dislocation barriers and dislocation tangles in the deformed Cu-Al alloys with different concentration of Al and test temperature at the grain size of 100 µm was carried out. It was established that the above parameters influence the dislocation distribution in different types of the dislocation substructures (DSS): dislocation chaos, dislocation networks without disorientation, nondisoriented and disoriented cells, in the walls and inside the cells. The distributions of the distances between dislocations in the investigated alloys for each DSS type formed at certain deformation degrees and various test temperatures were plotted.

Tailoring Superconductivity with Quantum Dislocations.

Science.gov (United States)

Li, Mingda; Song, Qichen; Liu, Te-Huan; Meroueh, Laureen; Mahan, Gerald D; Dresselhaus, Mildred S; Chen, Gang

2017-08-09

Despite the established knowledge that crystal dislocations can affect a material's superconducting properties, the exact mechanism of the electron-dislocation interaction in a dislocated superconductor has long been missing. Being a type of defect, dislocations are expected to decrease a material's superconducting transition temperature (T c ) by breaking the coherence. Yet experimentally, even in isotropic type I superconductors, dislocations can either decrease, increase, or have little influence on T c . These experimental findings have yet to be understood. Although the anisotropic pairing in dirty superconductors has explained impurity-induced T c reduction, no quantitative agreement has been reached in the case a dislocation given its complexity. In this study, by generalizing the one-dimensional quantized dislocation field to three dimensions, we reveal that there are indeed two distinct types of electron-dislocation interactions. Besides the usual electron-dislocation potential scattering, there is another interaction driving an effective attraction between electrons that is caused by dislons, which are quantized modes of a dislocation. The role of dislocations to superconductivity is thus clarified as the competition between the classical and quantum effects, showing excellent agreement with existing experimental data. In particular, the existence of both classical and quantum effects provides a plausible explanation for the illusive origin of dislocation-induced superconductivity in semiconducting PbS/PbTe superlattice nanostructures. A quantitative criterion has been derived, in which a dislocated superconductor with low elastic moduli and small electron effective mass and in a confined environment is inclined to enhance T c . This provides a new pathway for engineering a material's superconducting properties by using dislocations as an additional degree of freedom.

Phenotypic and molecular assessment of seven patients with 6p25 deletion syndrome: Relevance to ocular dysgenesis and hearing impairment

Directory of Open Access Journals (Sweden)

Ritch Robert

2004-06-01

Full Text Available Abstract Background Thirty-nine patients have been described with deletions involving chromosome 6p25. However, relatively few of these deletions have had molecular characterization. Common phenotypes of 6p25 deletion syndrome patients include hydrocephalus, hearing loss, and ocular, craniofacial, skeletal, cardiac, and renal malformations. Molecular characterization of deletions can identify genes that are responsible for these phenotypes. Methods We report the clinical phenotype of seven patients with terminal deletions of chromosome 6p25 and compare them to previously reported patients. Molecular characterization of the deletions was performed using polymorphic marker analysis to determine the extents of the deletions in these seven 6p25 deletion syndrome patients. Results Our results, and previous data, show that ocular dysgenesis and hearing impairment are the two most highly penetrant phenotypes of the 6p25 deletion syndrome. While deletion of the forkhead box C1 gene (FOXC1 probably underlies the ocular dysgenesis, no gene in this region is known to be involved in hearing impairment. Conclusions Ocular dysgenesis and hearing impairment are the two most common phenotypes of 6p25 deletion syndrome. We conclude that a locus for dominant hearing loss is present at 6p25 and that this locus is restricted to a region distal to D6S1617. Molecular characterization of more 6p25 deletion patients will aid in refinement of this locus and the identification of a gene involved in dominant hearing loss.

Dislocation Dynamics During Plastic Deformation

CERN Document Server

Messerschmidt, Ulrich

2010-01-01

The book gives an overview of the dynamic behavior of dislocations and its relation to plastic deformation. It introduces the general properties of dislocations and treats the dislocation dynamics in some detail. Finally, examples are described of the processes in different classes of materials, i.e. semiconductors, ceramics, metals, intermetallic materials, and quasicrystals. The processes are illustrated by many electron micrographs of dislocations under stress and by video clips taken during in situ straining experiments in a high-voltage electron microscope showing moving dislocations. Thus, the users of the book also obtain an immediate impression and understanding of dislocation dynamics.

Trans-triquetral Perilunate fracture dislocation

OpenAIRE

John-Henry Rhind; Abhinav Gulihar; Andrew Smith

2018-01-01

Perilunate dislocations and perilunate fracture dislocations are rare and serious injuries. Perilunate dislocations represent less than 10% of all carpal injuries of which 61% represent transcaphoid fractures. Because of their rarity, up to 25% of perilunate dislocations are initially missed on first assessment. We present the case of a 66-year-old-gentleman who sustained an isolated trans-triquetral perilunate fracture dislocation while walking his dog. This was diagnosed in the emergency de...

A continuum theory of edge dislocations

Science.gov (United States)

Berdichevsky, V. L.

2017-09-01

Continuum theory of dislocation aims to describe the behavior of large ensembles of dislocations. This task is far from completion, and, most likely, does not have a "universal solution", which is applicable to any dislocation ensemble. In this regards it is important to have guiding lines set by benchmark cases, where the transition from a discrete set of dislocations to a continuum description is made rigorously. Two such cases have been considered recently: equilibrium of dislocation walls and screw dislocations in beams. In this paper one more case is studied, equilibrium of a large set of 2D edge dislocations placed randomly in a 2D bounded region. The major characteristic of interest is energy of dislocation ensemble, because it determines the structure of continuum equations. The homogenized energy functional is obtained for the periodic dislocation ensembles with a random contents of the periodic cell. Parameters of the periodic structure can change slowly on distances of order of the size of periodic cells. The energy functional is obtained by the variational-asymptotic method. Equilibrium positions are local minima of energy. It is confirmed the earlier assertion that energy density of the system is the sum of elastic energy of averaged elastic strains and microstructure energy, which is elastic energy of the neutralized dislocation system, i.e. the dislocation system placed in a constant dislocation density field making the averaged dislocation density zero. The computation of energy is reduced to solution of a variational cell problem. This problem is solved analytically. The solution is used to investigate stability of simple dislocation arrays, i.e. arrays with one dislocation in the periodic cell. The relations obtained yield two outcomes: First, there is a state parameter of the system, dislocation polarization; averaged stresses affect only dislocation polarization and cannot change other characteristics of the system. Second, the structure of

Frenkel defect absorption on dislocations and dislocation discharge rate. Modeling determination of the absorption zone

International Nuclear Information System (INIS)

Mikhlin, Eh.Ya.

1988-01-01

A situation connected with the fact that evaluations of dislocation discharge strength which somehow or other are based on the elasticity theory in the dislocation nucleus or near it, do not lead to results complying with experimental data, is discussed. Bases of the alternative approach to this problem consisting in direct investigation into the process of Frenkel defect absorption on dislocation by its computerized simulation at the microscopic level are also presented. Methods of investigation and results are described using α dislocation in iron-alpha as an example. The concept of zones of vacancy and interstitial atom absorption on dislocation is discussed. It is shown that a spontaneous transition, performed by any of these defects near a dislocation is not always identical to absorption and usually appears to be only a part of a multistage process leading to the defect disappearance. Potential relief characteristics for vacancy movement near the dislocation are found. An area wide enough in a transverse direction is found around the dislocation. Vacncies reaching this area can be easily transported to places of their disappearance. Therefore the vacancy entry to this area is equivalent to the absorption. the procedure of simulating the atomic structure of a crystallite containing a dislocation with a step is described. Positions from which these defects perform spontaneous transitions, reaching the disappearance places are found on the dislocation near the step

Mechanisms for decoration of dislocations by small dislocation loops under cascade damage conditions

DEFF Research Database (Denmark)

Trinkaus, H.; Singh, B.N.; Foreman, A.J.E.

1997-01-01

. This effect may arise as a result of either (a) migration and enhanced agglomeration of single SIAs in the form of loops in the strain field of the dislocation or (b) glide and trapping of SIA loops (produced directly in the cascades) in the strain field of the dislocation, In the present paper, both...... of these possibilities are examined. It is shown that the strain field of the dislocation causes a SIA depletion in the compressive as well as in the dilatational region resulting in a reduced rather than enhanced agglomeration of SIAs. (SIA depletion may, however, induce enhanced vacancy agglomeration near dislocations...

Dislocation-cavity interaction in Fe: a comparison between molecular dynamics and dislocation dynamics

International Nuclear Information System (INIS)

Hafez Haghighat, S.M.; Schaeublin, R.; Fivel, M.C.

2007-01-01

Full text of publication follows: multi-scale modeling, including molecular dynamics (MD) and discrete dislocation dynamics (DDD) methods, appears as a significant tool for the description of plasticity and mechanical properties of materials. This research is on the investigation of the subsequence effects of irradiation on the plasticity of pure Fe and focuses on the interaction of a single dislocation and a spherical cavity, as void or He bubble. Extensive MD simulations of the interaction under imposed strain rate [1, 2] have shown that various temperatures and cavity sizes result in different release stresses depending on dislocation bow out. It appears that a temperature increase and cavity size decrease reduce the cavity strength. MD simulation shows that the elastic field around the cavity is largely anisotropic. This anisotropy may influence the way the dislocation unpins from the cavity. Following the MD simulations, the interaction of a single dislocation and a spherical cavity is now simulated using a DDD discrete dislocation dynamics model. The simulation accounts for the non-Schmidt effect induced by the bcc structure of Fe through local rules derived from MD simulations [3]. The cavity is introduced in the simulation by computing the image forces using a finite element technique. The effective stress applied on the dislocation is then obtained as the superimposition of the applied stress field, the image stress field and the internal stresses. Note that such a model only uses elasticity theory and no core effect of dislocations is taken into account. One of the objectives of this work is to check whether elasticity is responsible of the behaviour observed by MD. Several cases are tested. First an edge dislocation in a (110) plane is pushed against the cavity under a pure shear loading. The local reaction of the dislocations and the cavity are compared to the MD simulations. Then, the case of a screw dislocation is studied. Finally, other loading

Discrete dislocation modelling of submicron indentation

NARCIS (Netherlands)

Widjaja, A; Van der Giessen, E; Needleman, A

2005-01-01

Indentation of a planar single crystal by a circular rigid indenter is analyzed using discrete dislocation plasticity. The crystal has three slip systems and is initially dislocation-free, but edge dislocations can nucleate from point sources inside the crystal. The lattice resistance to dislocation

Dislocated Shoulder: Symptoms and Causes

Science.gov (United States)

... caused by: Sports injuries. Shoulder dislocation is a common injury in contact sports, such as football and hockey, and in sports that may involve falls, such as downhill skiing, gymnastics and volleyball. ... is a common source of dislocation. Falls. You may dislocate your ...

Microscopically derived free energy of dislocations

NARCIS (Netherlands)

Kooiman, M.; Hütter, M.; Geers, M.G.D.

2015-01-01

The dynamics of large amounts of dislocations is the governing mechanism in metal plasticity. The free energy of a continuous dislocation density profile plays a crucial role in the description of the dynamics of dislocations, as free energy derivatives act as the driving forces of dislocation

Effects of dislocations on polycrystal anelasticity

Science.gov (United States)

Sasaki, Y.; Takei, Y.; McCarthy, C.; Suzuki, A.

2017-12-01

Effects of dislocations on the seismic velocity and attenuation have been poorly understood, because only a few experimental studies have been performed [Guéguen et al., 1989; Farla et al., 2012]. By using organic borneol as a rock analogue, we measured dislocation-induced anelasticity accurately over a broad frequency range. We first measured the flow law of borneol aggregates by uniaxial compression tests under a confining pressure of 0.8 MPa. A transition from diffusion creep (n = 1) to dislocation creep (n = 5) was captured at about σ = 1 MPa (40°C-50°C). After deforming in the dislocation creep regime, sample microstructure showed irregular grain shape consistent with grain boundary migration. Next, we conducted three creep tests at σ = 0.27 MPa (diffusion creep regime), σ = 1.3 MPa and σ = 1.9 MPa (dislocation creep regime) on the same sample in increasing order, and measured Young's modulus E and attenuation Q-1 after each creep test by forced oscillation tests. The results show that as σ increased, E decreased and Q-1 increased. These changes induced by dislocations, however, almost fully recovered during the forced oscillation tests performed for about two weeks under a small stress (σ = 0.27 MPa) due to the dislocation recovery (annihilation). In order to constrain the time scale of the dislocation-induced anelastic relaxation, we further measured Young's modulus E at ultrasonic frequency before and after the dislocation creep and found that E at 106 Hz is not influenced by dislocations. Because E at 100 Hz is reduced by dislocations by 10%, the dislocation-induced anelastic relaxation occurs mostly between 102-106 Hz which is at a higher frequency than grain-boundary-induced anelasticity. To avoid dislocation recovery during the anelasticity measurement, we are now trying to perform an in-situ measurement of anelasticity while simultaneously deforming under a high stress associated with dislocation creep. The combination of persistent creep

Traumatic hip dislocations in children

International Nuclear Information System (INIS)

Minhas, M.S.

2010-01-01

Objectives: To evaluate clinical features, treatment and relationship to the time period between dislocation, reduction and early complications of traumatic dislocation of hip in children. Methods: Case series conducted at Jinnah Post Graduate Medical Centre Karachi from July 2005 to August 2009. Children with traumatic hip dislocation up to fifteen years of age who presented in last four years were included in this study. Their clinical information, etiology, associated injuries, duration, method of reduction and early complications are evaluated through emergency room proforma and indoor record. Follow up of patient was updated in outpatient department. Results: We had eight patients, six boys and two girls. Youngest 2.4 years and eldest was 12 years with mean age of 6.2 +- 3.8 years. All presented with posterior hip dislocation. Etiology was road traffic accident in two and history of fall in remaining six patients. Average duration of time between dislocation and reduction was 19 hours range 3-72 hours. Dislocated hips were reduced under General Anaesthesia in two patients and under sedation analgesia in six patients. No complications were noted in eight cases with mean 18.75 +- 13.23 months follows up. Conclusion: Traumatic hip dislocation in children is not rare. Slight trauma causes dislocation in younger age and immediate closed reduction and Immobilization reduces complications. (author

A Recurrent De Novo PACS2 Heterozygous Missense Variant Causes Neonatal-Onset Developmental Epileptic Encephalopathy, Facial Dysmorphism, and Cerebellar Dysgenesis.

Science.gov (United States)

Olson, Heather E; Jean-Marçais, Nolwenn; Yang, Edward; Heron, Delphine; Tatton-Brown, Katrina; van der Zwaag, Paul A; Bijlsma, Emilia K; Krock, Bryan L; Backer, E; Kamsteeg, Erik-Jan; Sinnema, Margje; Reijnders, Margot R F; Bearden, David; Begtrup, Amber; Telegrafi, Aida; Lunsing, Roelineke J; Burglen, Lydie; Lesca, Gaetan; Cho, Megan T; Smith, Lacey A; Sheidley, Beth R; Moufawad El Achkar, Christelle; Pearl, Phillip L; Poduri, Annapurna; Skraban, Cara M; Tarpinian, Jennifer; Nesbitt, Addie I; Fransen van de Putte, Dietje E; Ruivenkamp, Claudia A L; Rump, Patrick; Chatron, Nicolas; Sabatier, Isabelle; De Bellescize, Julitta; Guibaud, Laurent; Sweetser, David A; Waxler, Jessica L; Wierenga, Klaas J; Donadieu, Jean; Narayanan, Vinodh; Ramsey, Keri M; Nava, Caroline; Rivière, Jean-Baptiste; Vitobello, Antonio; Tran Mau-Them, Frédéric; Philippe, Christophe; Bruel, Ange-Line; Duffourd, Yannis; Thomas, Laurel; Lelieveld, Stefan H; Schuurs-Hoeijmakers, Janneke; Brunner, Han G; Keren, Boris; Thevenon, Julien; Faivre, Laurence; Thomas, Gary; Thauvin-Robinet, Christel

2018-05-03

Developmental and epileptic encephalopathies (DEEs) represent a large clinical and genetic heterogeneous group of neurodevelopmental diseases. The identification of pathogenic genetic variants in DEEs remains crucial for deciphering this complex group and for accurately caring for affected individuals (clinical diagnosis, genetic counseling, impacting medical, precision therapy, clinical trials, etc.). Whole-exome sequencing and intensive data sharing identified a recurrent de novo PACS2 heterozygous missense variant in 14 unrelated individuals. Their phenotype was characterized by epilepsy, global developmental delay with or without autism, common cerebellar dysgenesis, and facial dysmorphism. Mixed focal and generalized epilepsy occurred in the neonatal period, controlled with difficulty in the first year, but many improved in early childhood. PACS2 is an important PACS1 paralog and encodes a multifunctional sorting protein involved in nuclear gene expression and pathway traffic regulation. Both proteins harbor cargo(furin)-binding regions (FBRs) that bind cargo proteins, sorting adaptors, and cellular kinase. Compared to the defined PACS1 recurrent variant series, individuals with PACS2 variant have more consistently neonatal/early-infantile-onset epilepsy that can be challenging to control. Cerebellar abnormalities may be similar but PACS2 individuals exhibit a pattern of clear dysgenesis ranging from mild to severe. Functional studies demonstrated that the PACS2 recurrent variant reduces the ability of the predicted autoregulatory domain to modulate the interaction between the PACS2 FBR and client proteins, which may disturb cellular function. These findings support the causality of this recurrent de novo PACS2 heterozygous missense in DEEs with facial dysmorphim and cerebellar dysgenesis. Copyright © 2018 American Society of Human Genetics. All rights reserved.

Recombination properties of dislocations in GaN

Science.gov (United States)

Yakimov, Eugene B.; Polyakov, Alexander Y.; Lee, In-Hwan; Pearton, Stephen J.

2018-04-01

The recombination activity of threading dislocations in n-GaN with different dislocation densities and different doping levels was studied using electron beam induced current (EBIC). The recombination velocity on a dislocation, also known as the dislocation recombination strength, was calculated. The results suggest that dislocations in n-GaN giving contrast in EBIC are charged and surrounded by a space charge region, as evidenced by the observed dependence of dislocation recombination strength on dopant concentration. For moderate (below ˜108 cm-2) dislocation densities, these defects do not primarily determine the average diffusion length of nonequilibrium charge carriers, although locally, dislocations are efficient recombination sites. In general, it is observed that the effect of the growth method [standard metalorganic chemical vapor deposition (MOCVD), epitaxial lateral overgrowth versions of MOCVD, and hydride vapor phase epitaxy] on the recombination activity of dislocations is not very pronounced, although the average diffusion lengths can widely differ for various samples. The glide of basal plane dislocations at room temperature promoted by low energy electron irradiation does not significantly change the recombination properties of dislocations.

[Classification and Treatment of Sacroiliac Joint Dislocation].

Science.gov (United States)

Tan, Zhen; Huang, Zhong; Li, Liang; Meng, Wei-Kun; Liu, Lei; Zhang, Hui; Wang, Guang-Lin; Huang, Fu-Guo

2017-09-01

To develop a renewed classification and treatment regimen for sacroiliac joint dislocation. According to the direction of dislocation of sacroiliac joint,combined iliac,sacral fractures,and fracture morphology,sacroiliac joint dislocation was classified into 4 types. Type Ⅰ (sacroiliac anterior dislocation): main fracture fragments of posterior iliac wing dislocated in front of sacroiliac joint. Type Ⅱ (sacroiliac posterior dislocation): main fracture fragments of posterior iliac wing dislocated in posterior of sacroiliac joint. Type Ⅲ (Crescent fracturedislocation of the sacroiliac joint): upward dislocation of posterior iliac wing with oblique fracture through posterior iliac wing. Type ⅢA: a large crescent fragment and dislocation comprises no more than onethird of sacroiliac joint,which is typically inferior. Type ⅢB: intermediatesize crescent fragment and dislocation comprises between one and twothirds of joint. Type ⅢC: a small crescent fragment where dislocation comprises most,but not the entire joint. Different treatment regimens were selected for different types of fractures. Treatment for type Ⅰ sacroiliac joint dislocation: anterior iliac fossa approach pry stripping reset; sacroiliac joint fixed with sacroiliac screw through percutaneous. Treatment for type Ⅱ sacroiliac joint dislocation: posterior sacroiliac joint posterior approach; sacroiliac joint fixed with sacroiliac screw under computer guidance. Treatment for type ⅢA and ⅢB sacroiliac joint dislocation: posterior sacroiliac joint approach; sacroiliac joint fixed with reconstruction plate. Treatment for type ⅢC sacroiliac joint dislocation: sacroiliac joint closed reduction; sacroiliac joint fixed with sacroiliac screw through percutaneous. Treatment for type Ⅳ sacroiliac joint dislocation: posterior approach; sacroiliac joint fixed with spinal pelvic fixation. Results of 24 to 72 months patient follow-up (mean 34.5 months): 100% survival,100% wound healing,and 100

Quasicontinuum analysis of dislocation-coherent twin boundary interaction to provide local rules to discrete dislocation dynamics

Science.gov (United States)

Tran, H.-S.; Tummala, H.; Duchene, L.; Pardoen, T.; Fivel, M.; Habraken, A. M.

2017-10-01

The interaction of a pure screw dislocation with a Coherent Twin Boundary Σ3 in copper was studied using the Quasicontinuum method. Coherent Twin Boundary behaves as a strong barrier to dislocation glide and prohibits slip transmission across the boundary. Dislocation pileup modifies the stress field at its intersection with the Grain Boundary (GB). A methodology to estimate the strength of the barrier for a dislocation to slip across CTB is proposed. A screw dislocation approaching the boundary from one side either propagates into the adjacent twin grain by cutting through the twin boundary or is stopped and increases the dislocation pileup amplitude at the GB. Quantitative estimation of the critical stress for transmission was performed using the virial stress computed by Quasicontinuum method. The transmission mechanism and critical stress are in line with the literature. Such information can be used as input for dislocation dynamic simulations for a better modeling of grain boundaries.

Hybrid dislocated control and general hybrid projective dislocated synchronization for the modified Lue chaotic system

International Nuclear Information System (INIS)

Xu Yuhua; Zhou Wuneng; Fang Jianan

2009-01-01

This paper introduces a modified Lue chaotic system, and some basic dynamical properties are studied. Based on these properties, we present hybrid dislocated control method for stabilizing chaos to unstable equilibrium and limit cycle. In addition, based on the Lyapunov stability theorem, general hybrid projective dislocated synchronization (GHPDS) is proposed, which includes complete dislocated synchronization, dislocated anti-synchronization and projective dislocated synchronization as its special item. The drive and response systems discussed in this paper can be strictly different dynamical systems (including different dimensional systems). As examples, the modified Lue chaotic system, Chen chaotic system and hyperchaotic Chen system are discussed. Numerical simulations are given to show the effectiveness of these methods.

Hybrid dislocated control and general hybrid projective dislocated synchronization for the modified Lue chaotic system

Energy Technology Data Exchange (ETDEWEB)

Xu Yuhua [College of Information Science and Technology, Donghua University, Shanghai 201620 (China) and Department of Maths, Yunyang Teacher' s College, Hubei 442000 (China)], E-mail: yuhuaxu2004@163.com; Zhou Wuneng [College of Information Science and Technology, Donghua University, Shanghai 201620 (China)], E-mail: wnzhou@163.com; Fang Jianan [College of Information Science and Technology, Donghua University, Shanghai 201620 (China)

2009-11-15

This paper introduces a modified Lue chaotic system, and some basic dynamical properties are studied. Based on these properties, we present hybrid dislocated control method for stabilizing chaos to unstable equilibrium and limit cycle. In addition, based on the Lyapunov stability theorem, general hybrid projective dislocated synchronization (GHPDS) is proposed, which includes complete dislocated synchronization, dislocated anti-synchronization and projective dislocated synchronization as its special item. The drive and response systems discussed in this paper can be strictly different dynamical systems (including different dimensional systems). As examples, the modified Lue chaotic system, Chen chaotic system and hyperchaotic Chen system are discussed. Numerical simulations are given to show the effectiveness of these methods.

Coarse-grained elastodynamics of fast moving dislocations

International Nuclear Information System (INIS)

Xiong, Liming; Rigelesaiyin, Ji; Chen, Xiang; Xu, Shuozhi; McDowell, David L.; Chen, Youping

2016-01-01

The fundamental mechanism of dynamic plasticity in metallic materials subjected to shock loading remains unclear because it is difficult to obtain the precise information of individual fast moving dislocations in metals from the state-of-the-art experiments. In this work, the dynamics of sonic dislocations in anisotropic crystalline materials is explored through a concurrent atomistic-continuum modeling method. We make a first attempt to characterize the complexity of nonuniformly moving dislocations in anisotropic crystals from atomistic to microscale, including the energy intensities as well as the wavelengths of acoustic phonons emitted from sonic dislocations, and the velocity-dependent stress fluctuations around the core of nonuniformly moving dislocations. Instantaneous dislocation velocities and phonon drag effects on the dislocation motions are quantified and analyzed. Mach cones in a V-shaped pattern of the phonon wave-fronts are observed in the wake of the sonic dislocations. Analysis of simulation results based on a wavelet transform show that the faster a dislocation is moving, the longer the emitted phonon wavelength. The dislocation velocity drops dramatically with the occurrence of the interactions between dislocations and phonon waves reflected from the boundaries of specimens. The concurrent atomistic-continuum modeling framework is demonstrated to be the first multiscale method that explicitly treats the strong coupling between the long-range elastic fields away from the dislocation core, the highly nonlinear time-dependent stress field within the core, and the evolutions of the atomic-scale dislocation core structures. As such, it is shown that this method is capable in predicting elastodynamics of dislocations in the presence of inertia effects associated with sonic dislocations in micron-sized anisotropic crystalline materials from the atomic level, which is not directly accessible to the recent elastodynamic discrete dislocation model.

Haploinsufficient Bmp4 ocular phenotypes include anterior segment dysgenesis with elevated intraocular pressure

Directory of Open Access Journals (Sweden)

Nusinowitz Steven

2001-11-01

Full Text Available Abstract Background Glaucoma is a blinding disease usually associated with high intraocular pressure (IOP. In some families, abnormal anterior segment development contributes to glaucoma. The genes causing anterior segment dysgenesis and glaucoma in most of these families are not identified and the affected developmental processes are poorly understood. Bone morphogenetic proteins (BMPs participate in various developmental processes. We tested the importance of Bmp4 gene dosage for ocular development and developmental glaucoma. Results Bmp4+/- mice have anterior segment abnormalities including malformed, absent or blocked trabecular meshwork and Schlemm's canal drainage structures. Mice with severe drainage structure abnormalities, over 80% or more of their angle's extent, have elevated IOP. The penetrance and severity of abnormalities is strongly influenced by genetic background, being most severe on the C57BL/6J background and absent on some other backgrounds. On the C57BL/6J background there is also persistence of the hyaloid vasculature, diminished numbers of inner retinal cells, and absence of the optic nerve. Conclusions We demonstrate that heterozygous deficiency of BMP4 results in anterior segment dysgenesis and elevated IOP. The abnormalities are similar to those in human patients with developmental glaucoma. Thus, BMP4 is a strong candidate to contribute to Axenfeld-Rieger anomaly and other developmental conditions associated with human glaucoma. BMP4 also participates in posterior segment development and wild-type levels are usually critical for optic nerve development on the C57BL/6J background. Bmp4+/- mice are useful for studying various components of ocular development, and may allow identification of strain specific modifiers affecting a variety of ocular phenotypes.

Unilateral congenital corneal keloid with anterior segment mesenchymal dysgenesis and subluxated lens: case report and review of literature.

Science.gov (United States)

Vanathi, M; Sen, Seema; Panda, Anita; Dada, Tanuj; Behera, Geeta; Khokhar, Sudharshan

2007-01-01

To report the unusual association of unilateral congenital corneal keloid with anterior-segment mesenchymal dysgenesis and bilateral subluxated lens. A 20-year old man presented with a mass lesion involving the left cornea. The corneal lesion had been present since birth. On biomicroscopic examination, a well-defined vascularized, grayish-white mass occupying the whole of the left cornea was seen. The right eye showed multiple peripheral corneal opacities with iridocorneal adhesions, a poorly defined supranasal limbus, and a subluxated lens. Excision biopsy of the mass was done for histopathologic examination. Histopathologic examination of the excised corneal mass showed features consistent with that of a corneal keloid: thickened keratinized epithelium, absent Bowman membrane layer, and fibrovascular hyperplasia composed of hyalinized collagen fibers with irregular orientation of the collagen lamellae. During penetrating keratoplasty of the left eye, an anomalous iris pattern with poorly defined angle and a supranasal subluxated lens was also observed. Extraction of the subluxated lens was also done. The graft failed subsequent to a nonhealing persistent epithelial defect. Our case report highlights the rare association of a unilateral congenital corneal keloid with anterior-segment mesenchymal dysgenesis and bilateral subluxated lens.

Epidemiology of Isolated Acromioclavicular Joint Dislocation

Directory of Open Access Journals (Sweden)

Claudio Chillemi

2013-01-01

Full Text Available Background. Acromioclavicular (AC joint dislocation is a common shoulder problem. However, information about the basic epidemiological features of this condition is scarce. The aim of this study is to analyze the epidemiology of isolated AC dislocation in an urban population. Materials and Methods. A retrospective database search was performed to identify all patients with an AC dislocation over a 5-year period. Gender, age, affected side and traumatic mechanism were taken into account. X-rays were reviewed by two of the authors and dislocations were classified according to the Rockwood’s criteria. Results. A total of 108 patients, with a mean age of 37.5 years were diagnosed with AC dislocation. 105 (97.2% had an isolated AC dislocation, and 3 (2.8% were associated with a clavicle fracture. The estimated incidence was 1.8 per 10000 inhabitants per year and the male-female ratio was 8.5 : 1. 50.5% of all dislocations occurred in individuals between the ages of 20 and 39 years. The most common traumatic mechanism was sport injury and the most common type of dislocation was Rockwood type III. Conclusions. Age between 20 and 39 years and male sex represent significant demographic risk factors for AC dislocation.

Theory of interacting dislocations on cylinders.

Science.gov (United States)

Amir, Ariel; Paulose, Jayson; Nelson, David R

2013-04-01

We study the mechanics and statistical physics of dislocations interacting on cylinders, motivated by the elongation of rod-shaped bacterial cell walls and cylindrical assemblies of colloidal particles subject to external stresses. The interaction energy and forces between dislocations are solved analytically, and analyzed asymptotically. The results of continuum elastic theory agree well with numerical simulations on finite lattices even for relatively small systems. Isolated dislocations on a cylinder act like grain boundaries. With colloidal crystals in mind, we show that saddle points are created by a Peach-Koehler force on the dislocations in the circumferential direction, causing dislocation pairs to unbind. The thermal nucleation rate of dislocation unbinding is calculated, for an arbitrary mobility tensor and external stress, including the case of a twist-induced Peach-Koehler force along the cylinder axis. Surprisingly rich phenomena arise for dislocations on cylinders, despite their vanishing Gaussian curvature.

Relaxation strain measurements in cellular dislocation structures

International Nuclear Information System (INIS)

Tsai, C.Y.; Quesnel, D.J.

1984-01-01

The conventional picture of what happens during a stress relaxation usually involves imagining the response of a single dislocation to a steadily decreasing stress. The velocity of this dislocation decreases with decreasing stress in such a way that we can measure the stress dependence of the dislocation velocity. Analysis of the data from a different viewpoint enables us to calculate the apparent activation volume for the motion of the dislocation under the assumption of thermally activated glie. Conventional thinking about stress relaxation, however, does not consider the eventual fate of this dislocation. If the stress relaxes to a low enough level, it is clear that the dislocation must stop. This is consistent with the idea that we can determine the stress dependence of the dislocation velocity from relaxation data only for those cases where the dislocation's velocity is allowed to approach zero asymptotically, in short, for those cases where the dislocation never stops. This conflict poses a dilemma for the experimentalist. In real crystals, however, obstacles impede the dislocation's progress so that those dislocations which are stopped at a given stress will probably never resume motion under the influence of the steadily declining stress present during relaxation. Thus one could envision stress relaxation as a process of exhaustion of mobile dislocations, rather than a process of decreasing dislocation velocity. Clearly both points of view have merit and in reality both mechanisms contribute to the phenomena

Dislocation pinning effects induced by nano-precipitates during warm laser shock peening: Dislocation dynamic simulation and experiments

Science.gov (United States)

Liao, Yiliang; Ye, Chang; Gao, Huang; Kim, Bong-Joong; Suslov, Sergey; Stach, Eric A.; Cheng, Gary J.

2011-07-01

Warm laser shock peening (WLSP) is a new high strain rate surface strengthening process that has been demonstrated to significantly improve the fatigue performance of metallic components. This improvement is mainly due to the interaction of dislocations with highly dense nanoscale precipitates, which are generated by dynamic precipitation during the WLSP process. In this paper, the dislocation pinning effects induced by the nanoscale precipitates during WLSP are systematically studied. Aluminum alloy 6061 and AISI 4140 steel are selected as the materials with which to conduct WLSP experiments. Multiscale discrete dislocation dynamics (MDDD) simulation is conducted in order to investigate the interaction of dislocations and precipitates during the shock wave propagation. The evolution of dislocation structures during the shock wave propagation is studied. The dislocation structures after WLSP are characterized via transmission electron microscopy and are compared with the results of the MDDD simulation. The results show that nano-precipitates facilitate the generation of highly dense and uniformly distributed dislocation structures. The dislocation pinning effect is strongly affected by the density, size, and space distribution of nano-precipitates.

Primary traumatic patellar dislocation

Directory of Open Access Journals (Sweden)

Tsai Chun-Hao

2012-06-01

Full Text Available Abstract Acute traumatic patellar dislocation is a common injury in the active and young adult populations. MRI of the knee is recommended in all patients who present with acute patellar dislocation. Numerous operative and non-operative methods have been described to treat the injuries; however, the ideal management of the acute traumatic patellar dislocation in young adults is still in debate. This article is intended to review the studies to the subjects of epidemiology, initial examination and management.

Stress-free states of continuum dislocation fields : Rotations, grain boundaries, and the Nye dislocation density tensor

NARCIS (Netherlands)

Limkumnerd, Surachate; Sethna, James P.

We derive general relations between grain boundaries, rotational deformations, and stress-free states for the mesoscale continuum Nye dislocation density tensor. Dislocations generally are associated with long-range stress fields. We provide the general form for dislocation density fields whose

Anterior segment dysgenesis associated with Williams-Beuren syndrome: a case report and review of the literature.

Science.gov (United States)

Todorova, Margarita G; Grieshaber, Matthias C; Cámara, Rafael J A; Miny, Peter; Palmowski-Wolfe, Anja M

2014-05-21

Williams-Beuren syndrome is characterized by mild mental retardation, specific neurocognitive profile, hypercalcemia during infancy, distinctive facial features and cardiovascular diseases. We report on complete ophthalmologic, sonographic and genetic evaluation of a girl with a clinical phenotype of Williams-Beuren syndrome, associated with unilateral anterior segment dysgenesis and bilateral cleft of the soft and hard palate. These phenotypic features have not been linked to the haploinsufficiency of genes involved in the microdeletion. A term born girl presented at the initial examination with clouding of the right cornea. On ultrasound biomicroscopy the anterior chamber structures were difficult to differentiate, showing severe adhesions from the opacified cornea to the iris with a kerato-irido-lenticular contact to the remnant lens, a finding consistent with Peters' anomaly. Genetic analyses including FISH confirmed a loss of the critical region 7q11.23, usually associated with the typical Williams-Beuren syndrome. Microsatellite analysis showed a loss of about 2.36 Mb. A diagnosis of Williams-Beuren syndrome was made based on the microdeletion of 7q11.23. The unique features, including unilateral microphthalmia and anterior segment dysgenesis, were unlikely to be caused by the microdeletion. Arguments in favor of the latter are unilateral manifestation, as well as the fact that numerous patients with deletions of comparable or microscopically visible size have not shown similar manifestations.

Molecular dynamics simulation of dislocation intersections in aluminum

International Nuclear Information System (INIS)

Li, M.; Chu, W.Y.; Qian, C.F.; Gao, K.W.; Qiao, L.J.

2003-01-01

The molecular dynamics method is used to simulate dislocation intersection in aluminum containing 1.6x10 6 atoms using embedded atom method (EAM) potential. The results show that after intersection between two right-hand screw dislocations of opposite sign there are an extended jog corresponding to a row of 1/3 vacancies in the intersected dislocation, and a trail of vacancies behind the moving dislocation. After intersection between screw dislocations of same sign, there are an extended jog corresponding to a row of 1/3 interstitials in the intersected dislocation, and a trail of interstitials behind the moving dislocation. After intersection between screw and edge dislocations with different Burgers vector, there are a constriction corresponding to one 1/3 vacancy in the edge dislocation, and no point-defects behind the screw dislocation. When a moving screw dislocation intersects an edge dislocation with the same Burgers vector, the point of intersection will split into two constrictions corresponding to one 1/3 vacancy and 1/3 interstitial, respectively. The moving screw dislocation can pass the edge dislocation only after the two constrictions, which can move along the line of intersection of the two slip planes, meet and annihilate

Energetics of dislocation nucleation under a nanoindenter

International Nuclear Information System (INIS)

Zhang Chuanli; Xu Guanshui

2005-01-01

We present an analysis of dislocation nucleation under an idealized nanoindenter based on the variational boundary integral formulation of the Peierls-Nabarro dislocation model. By solving the embryonic dislocation profiles, corresponding to the relative displacements between the two adjacent atomic layers along the slip plane, we have determined the critical conditions for athermal dislocation nucleation as well as the activation energies required to thermally activate embryonic dislocations from their stable to unstable saddle point configurations. The effect of the size of the indenter on the energetics of dislocation nucleation is quantitatively characterized. The result is compared with a simplified analysis based on the application of the Rice model for dislocation nucleation at a crack tip

Energetics of dislocation nucleation under a nanoindenter

Energy Technology Data Exchange (ETDEWEB)

Zhang Chuanli [College of Mechanical Engineering, Yangtze University, Jingzhou, Hubei 434023 (China); Department of Mechanical Engineering, University of California, Riverside, CA 92521 (United States); Xu Guanshui [Department of Mechanical Engineering, University of California, Riverside, CA 92521 (United States)]. E-mail: guanshui.xu@ucr.edu

2005-07-25

We present an analysis of dislocation nucleation under an idealized nanoindenter based on the variational boundary integral formulation of the Peierls-Nabarro dislocation model. By solving the embryonic dislocation profiles, corresponding to the relative displacements between the two adjacent atomic layers along the slip plane, we have determined the critical conditions for athermal dislocation nucleation as well as the activation energies required to thermally activate embryonic dislocations from their stable to unstable saddle point configurations. The effect of the size of the indenter on the energetics of dislocation nucleation is quantitatively characterized. The result is compared with a simplified analysis based on the application of the Rice model for dislocation nucleation at a crack tip.

Ipsilateral open anterior hip dislocation and open posterior elbow dislocation in an adult

Directory of Open Access Journals (Sweden)

Kumar Sunil

2014-02-01

Full Text Available 【Abstract】Open anterior dislocation of the hip is a very rare injury, especially in adults. It is a hyperabduction, external rotation and extension injury. Its combination with open posterior dislocation of the elbow has not been described in English language-based medical literature. Primary resuscitation, debridement, urgent reduction of dislocation, and adequate antibiotic support resulted in good clinical outcome in our patient. At 18 months follow-up, no signs of avascular necrosis of the femoral head or infection were observed.

Medial peritalar fracture dislocation of the talar body

Directory of Open Access Journals (Sweden)

Jacob B. Stirton

2015-04-01

Full Text Available Peritalar fracture dislocations typically involve the talar neck and are classified according to Hawkins. To our knowledge, peritalar fracture dislocation involving the talar body has not been formally reported. In this article, we describe a case of peritalar fracture dislocation of the talar body. Keywords: Peritalar dislocation, Talus fracture, Talar body fracture dislocation, Medial subtalar dislocation

The movement of screw dislocations in tungsten

International Nuclear Information System (INIS)

Tian Xiaogeng; Woo Chungho

2004-01-01

Using Acland potential for tungsten, the movement of 1/2a screw dislocation under shear stress was investigated by molecular dynamics simulation. Equilibrated core structure was obtained by relaxation of screw dislocation with proper boundary conditions. We found that the equilibrium dislocation core has three-fold symmetry and spread out in three direction on {1 1 0} planes. The screw dislocation core could not keep the original shape when the shear stress applied. The dislocation could not move until the shear stress became large enough. The dislocation moved in zigzag when the shear stress neared the Peierls stress. When the shear stress became larger, the dislocation moved in zigzag at the beginning and than moved almost in straight line in [2-bar11] direction. The large shear stress applied, the long distance moved before the dislocation stilled in z-direction and the large velocity in y-direction

Traumatic hip dislocation: early MRI findings

International Nuclear Information System (INIS)

Laorr, A.; Greenspan, A.; Anderson, M.W.; Moehring, H.D.; McKinley, T.

1995-01-01

Objective of this study was to present the spectrum of early magnetic resonance imaging (MRI) findings following traumatic dislocation of the femoral head, and to identify any associated injuries. Prospective MRI of both hips was performed on 18 patients within 5 weeks of a traumatic femoral head dislocation. The interval between the time of injury and the imaging studies ranged from 2 to 35 days. Posterior dislocation was present in 14 patients and anterior dislocation in 4 patients. In the majority of cases, we performed axial T1, coronal T1, and coronal T2 * (MPGR) sequences. MRI can effectively identify and quantify the muscle injury and joint effusion that invariably accompany traumatic hip dislocations. It is also useful for demonstrating trabecular bone contusion (trabecular injury) and iliofemoral ligament injury, which occur commonly with acute hip dislocation. (orig./VHE)

Ovarian dysgenesis in an alpaca with a minute chromosome 36.

Science.gov (United States)

Fellows, Elizabeth; Kutzler, Michelle; Avila, Felipe; Das, Pranab J; Raudsepp, Terje

2014-01-01

A 4-year-old female alpaca (Lama pacos [LPA]) was presented to the Oregon State Veterinary Teaching Hospital for failure to display receptive behavior to males. Although no abnormalities were found on physical examination, transrectal ultrasonographic examination of the reproductive tract revealed uterine hypoplasia and ovarian dysgenesis. Cytogenetic analysis demonstrated a normal female 74,XX karyotype with 1 exceptionally small (minute) homologue of autosome LPA36. Chromosome analysis by Giemsa staining and DAPI- and C-banding revealed that the minute LPA36 was submetacentric, AT-rich, and largely heterochromatic. Because of the small size and lack of molecular markers, it was not possible to identify the origin of the minute. There is a need to improve molecular cytogenetic tools to further study the phenomenon of this minute chromosome and its relation to female reproduction in alpacas and llamas. © The American Genetic Association. 2012. All rights reserved. For permissions, please email: journals.permissions@oup.com.

HRTEM studies of dislocations in cubic BN

International Nuclear Information System (INIS)

Nistor, L.C.; Tendeloo, G. van; Dinca, G.

2004-01-01

The atomic structure of dislocations in cubic boron nitride has been investigated by high resolution transmission electron microscopy. Most of the perfect dislocations, screw and 60 edge, are dissociated. A 60 dislocation which was undissociated has been analysed. Computer simulation is performed in an attempt to characterise the core structure. Twinning dislocations and dislocations resulting from the intersection of stacking faults are also revealed. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

HRTEM studies of dislocations in cubic BN

Energy Technology Data Exchange (ETDEWEB)

Nistor, L.C. [National Institute for Materials Physics, P.O. Box MG-7 Magurele, 077125 Bucharest (Romania); Tendeloo, G. van [University of Antwerp, EMAT, Groenenborgerlaan 171, 2020 Antwerp (Belgium); Dinca, G. [Dacia Synthetic Diamond Factory, Timisoara av. 5, P.O. Box 58-52, 077350 Bucharest (Romania)

2004-09-01

The atomic structure of dislocations in cubic boron nitride has been investigated by high resolution transmission electron microscopy. Most of the perfect dislocations, screw and 60 edge, are dissociated. A 60 dislocation which was undissociated has been analysed. Computer simulation is performed in an attempt to characterise the core structure. Twinning dislocations and dislocations resulting from the intersection of stacking faults are also revealed. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Rules for Forest Interactions between Dislocations

International Nuclear Information System (INIS)

Wickham, L. K.; Schwarz, K. W.; Stoelken, J. S.

1999-01-01

The dynamical interactions of dislocations existing on intersecting glide planes have been investigated using numerical simulations based on isotropic linear elastic theory. It is found that such dislocations either repel, attract and form growing junctions, or attract and form bound crossed states. Which of these occurs can be predicted from a surprisingly simple analysis of the initial configurations. The outcome is determined primarily by the angles which the dislocations initially make with the glide-plane intersection edge, and is largely independent of the initial distance between the dislocations, their initial curvature, or ambient applied stresses. The results provide a rule for dealing with forest interactions within the context of large multiple-dislocation computations. (c) 1999 The American Physical Society

Effects of dislocations on electron channeling

International Nuclear Information System (INIS)

George, Juby; Pathak, A P

2009-01-01

The phenomenon of electron channeling in a crystal affected by dislocations is considered. Earlier we had considered the quantum aspects of the positron channeling in a crystal bent by dislocations where the effects of longitudinal motion of the particle were also considered along with the transverse motion. In this paper, the effective potential for the electron case is found for the two regions of dislocation-affected channel. There is considerable shift in the potential minima due to dislocations. The frequency and the corresponding spectrum of the channeling radiation due to electrons channeling through the perfect channel and the two regions of dislocation-affected channels are calculated. The spectral distribution of radiation intensity changes with the parameters of dislocation. The continuity of wavefunctions and their derivatives is used at the three boundaries and the reflection and transmission coefficients are found using these boundary conditions in the same way as in the positron case.

Energy flow around a moving dislocation

International Nuclear Information System (INIS)

Koizumi, H; Kirchner, H O K

2009-01-01

A dislocation moving in a lattice emits lattice waves. We study the energy flow accompanying the lattice wave emission in a molecular dynamics situation. About two thirds of the static free energy are emitted as lattice waves from the moving dislocation. Work done by the region around the dislocation helps to initiate the motion from the unstable equilibrium state under a small applied stress, or to compensate the energy emitted as lattice waves when the dislocation makes a long distance motion under a larger stress.

Atomistic simulations of dislocation processes in copper

DEFF Research Database (Denmark)

Vegge, T.; Jacobsen, K.W.

2002-01-01

We discuss atomistic simulations of dislocation processes in copper based on effective medium theory interatomic potentials. Results on screw dislocation structures and processes are reviewed with particular focus on point defect mobilities and processes involving cross slip. For example......, the stability of screw dislocation dipoles is discussed. We show that the presence of jogs will strongly influence cross slip barriers and dipole stability. We furthermore present some new results on jogged edge dislocations and edge dislocation dipoles. The jogs are found to be extended, and simulations...

Neglected locked vertical patellar dislocation

Science.gov (United States)

Gupta, Rakesh Kumar; Gupta, Vinay; Sangwan, Sukhbir Singh; Kamboj, Pradeep

2012-01-01

Patellar dislocations occurring about the vertical and horizontal axis are rare and irreducible. The neglected patellar dislocation is still rarer. We describe the clinical presentation and management of a case of neglected vertical patellar dislocation in a 6 year-old boy who sustained an external rotational strain with a laterally directed force to his knee. Initially the diagnosis was missed and 2 months later open reduction was done. The increased tension generated by the rotation of the lateral extensor retinaculum kept the patella locked in the lateral gutter even with the knee in full extension. Traumatic patellar dislocation with rotation around a vertical axis has been described earlier, but no such neglected case has been reported to the best of our knowledge. PMID:23162154

Neglected locked vertical patellar dislocation

Directory of Open Access Journals (Sweden)

Rakesh Kumar Gupta

2012-01-01

Full Text Available Patellar dislocations occurring about the vertical and horizontal axis are rare and irreducible. The neglected patellar dislocation is still rarer. We describe the clinical presentation and management of a case of neglected vertical patellar dislocation in a 6 year-old boy who sustained an external rotational strain with a laterally directed force to his knee. Initially the diagnosis was missed and 2 months later open reduction was done. The increased tension generated by the rotation of the lateral extensor retinaculum kept the patella locked in the lateral gutter even with the knee in full extension. Traumatic patellar dislocation with rotation around a vertical axis has been described earlier, but no such neglected case has been reported to the best of our knowledge.

Contribution to the study of screw dislocations; Contribution a l'etude des dislocations helicoidales

Energy Technology Data Exchange (ETDEWEB)

Grilhe, J [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

1965-03-01

The aim of this work is to study the germination, growth and properties of screw dislocations. In the introduction (first chapter), we describe briefly the main experimental results obtained by various authors (observations of screws by Amelinckx and Bontinck in ionic crystals, by Dash in silicon crystals and by Thomas and Whelan in aluminium based alloys). We then make a few considerations concerning characteristic geometry of screws and the various methods used for calculating the energy of a dislocation. In the second chapter we study the problems involving only slip of the screw around its cylinder. We calculate the equilibrium step as a function of the forces acting on the extremities. We determine the critical stress required to disrupt the screw and study the interactions between the screw and other dislocations of the lattice. In the third chapter we consider the problem of the stability when the dislocation can climb by absorption or emission of vacancies. We study separately the stability of the size which only involves volume diffusion and the stability of the shape which depends only on the rearrangement of the vacancies along the dislocation. In chapter four we put forward a germination model for the screws: since the vacancies are not absorbed by the screw dislocations, they form clusters which take up a spiral form. The formation of these spirals is studied from the geometrical point of view in face-centered cubic systems. In chapter five we make use of the results obtained in chapters two and three for studying the growth of the spirals. (author) [French] Le but de ce travail est d'etudier la germination, la croissance et les proprietes des dislocations helico ales. Dans l'introduction (premier chapitre), nous exposons brievement les principaux resultats experimentaux obtenus par differents auteurs (observations d'helice par Amelinckx et Bontinck dans les cristaux ioniques, par Dash dans des cristaux de silicium et par Thomas et Whelan dans des

Atomistic simulation of hydrogen dynamics near dislocations in vanadium hydrides

International Nuclear Information System (INIS)

Ogawa, Hiroshi

2015-01-01

Highlights: • Hydrogen–dislocation interaction was simulated by molecular dynamics method. • Different distribution of H atoms were observed at edge and screw dislocation. • Planner distribution of hydrogen may be caused by partialized edge dislocation. • Hydrogen diffusivity was reduced in both edge and screw dislocation models. • Pipe diffusion was observed for edge dislocation but not for screw dislocation. - Abstract: Kinetics of interstitial hydrogen atoms near dislocation cores were analyzed by atomistic simulation. Classical molecular dynamics method was applied to model structures of edge and screw dislocations in α-phase vanadium hydride. Simulation showed that hydrogen atoms aggregate near dislocation cores. The spatial distribution of hydrogen has a planner shape at edge dislocation due to dislocation partialization, and a cylindrical shape at screw dislocation. Simulated self-diffusion coefficients of hydrogen atoms in dislocation models were a half- to one-order lower than that of dislocation-free model. Arrhenius plot of self-diffusivity showed slightly different activation energies for edge and screw dislocations. Directional dependency of hydrogen diffusion near dislocation showed high and low diffusivity along edge and screw dislocation lines, respectively, hence so called ‘pipe diffusion’ possibly occur at edge dislocation but does not at screw dislocation

Dislocation evolution and properties enhancement of GH2036 by laser shock processing: Dislocation dynamics simulation and experiment

Energy Technology Data Exchange (ETDEWEB)

Ren, X.D., E-mail: renxd@mail.ujs.edu.cn [School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013 (China); Zhou, W.F.; Ren, Y.P.; Xu, S.D.; Liu, F.F. [School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013 (China); Yuan, S.Q. [Research Center of Fluid Machinery Engineering and Technical, Jiangsu University, Zhenjiang 212013 (China); Ren, N.F.; Huang, J.J. [School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013 (China)

2016-01-27

This paper systematically investigated the effect of laser shock processing (LSP) on dislocation evolution and microstructure configuration of GH2036 alloy. Surface topography and roughness were tested by Axio CSM 700 microscope. The dislocation configurations were characterized by transmission electron microscope (TEM) and simulated by multi-scale discrete dislocation dynamics (DD) method. The results have confirmed that LSP had a beneficial effect on micro-hardness, which could be increased by 16%, and the surface topography exhibited excellent stability even after thermal cycle. The dislocation density and stress–strain response have strong dependence on laser power intensity. Reasonable agreement between DD simulation and experiments is achieved. The results showed that complex random microstructures can be observed in the shocked surface. The grain refinement mechanism of LSP GH2036 involves dislocation segmentation and twin intersections.

The effect of length scale on the determination of geometrically necessary dislocations via EBSD continuum dislocation microscopy

Energy Technology Data Exchange (ETDEWEB)

Ruggles, T.J., E-mail: timmyruggs@gmail.com [National Institute of Aerospace, 100 Exploration Way, Hampton, VA 23666 (United States); Department of Mechanical Engineering, Brigham Young University, Provo, UT 84602 (United States); Rampton, T.M. [EDAX Inc., 91 McKee Drive, Mahwah, NJ 07430 (United States); Khosravani, A. [Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332 (United States); Fullwood, D.T. [Department of Mechanical Engineering, Brigham Young University, Provo, UT 84602 (United States)

2016-05-15

Electron backscatter diffraction (EBSD) dislocation microscopy is an important, emerging field in metals characterization. Currently, calculation of geometrically necessary dislocation (GND) density is problematic because it has been shown to depend on the step size of the EBSD scan used to investigate the sample. This paper models the change in calculated GND density as a function of step size statistically. The model provides selection criteria for EBSD step size as well as an estimate of the total dislocation content. Evaluation of a heterogeneously deformed tantalum specimen is used to asses the method. - Highlights: • The GND to SSD transition with increasing step size is analytically modeled. • Dislocation density of a microindented tantalum single crystal is measured. • Guidelines for step size selection in EBSD dislocation microscopy are presented.

Atraumatic Anterior Dislocation of the Hip Joint

Directory of Open Access Journals (Sweden)

Tadahiko Ohtsuru

2015-01-01

Full Text Available Dislocation of the hip joint in adults is usually caused by high-energy trauma such as road traffic accidents or falls from heights. Posterior dislocation is observed in most cases. However, atraumatic anterior dislocation of the hip joint is extremely rare. We present a case of atraumatic anterior dislocation of the hip joint that was induced by an activity of daily living. The possible causes of this dislocation were anterior capsule insufficiency due to developmental dysplasia of the hip, posterior pelvic tilt following thoracolumbar kyphosis due to vertebral fracture, and acetabular anterior coverage changes by postural factor. Acetabular anterior coverage changes in the sagittal plane were measured using a tomosynthesis imaging system. This system was useful for elucidation of the dislocation mechanism in the present case.

Riemann–Cartan Geometry of Nonlinear Dislocation Mechanics

KAUST Repository

Yavari, Arash

2012-03-09

We present a geometric theory of nonlinear solids with distributed dislocations. In this theory the material manifold-where the body is stress free-is a Weitzenböck manifold, that is, a manifold with a flat affine connection with torsion but vanishing non-metricity. Torsion of the material manifold is identified with the dislocation density tensor of nonlinear dislocation mechanics. Using Cartan\\'s moving frames we construct the material manifold for several examples of bodies with distributed dislocations. We also present non-trivial examples of zero-stress dislocation distributions. More importantly, in this geometric framework we are able to calculate the residual stress fields, assuming that the nonlinear elastic body is incompressible. We derive the governing equations of nonlinear dislocation mechanics covariantly using balance of energy and its covariance. © 2012 Springer-Verlag.

Internal stresses, dislocation mobility and ductility

Science.gov (United States)

Saada, G.

1991-06-01

The description of plastic deformation must take into account individual mechanisms and heterogeneity of plastic strain. Influence of dislocation interaction with forest dislocations and of cross slip are connected with the organization of dipole walls. The latter are described and their development is explained as a consequence of edge effects. Applications are discussed. La description de la déformation plastique doit prendre en compte les interactions individuelles des dislocations et l'hétérogénéité à grande échelle de la déformation plastique. Les interactions des dislocations mobiles avec la forêt de dislocations, le glissement dévié, ont pour effet la création de parois dipolaires. Celles-ci sont décrites et leur développement est appliqué à partir des effets de bord.

Statistics of dislocation pinning at localized obstacles

Energy Technology Data Exchange (ETDEWEB)

Dutta, A. [S. N. Bose National Centre for Basic Sciences, Salt Lake, Kolkata 700098 (India); Bhattacharya, M., E-mail: mishreyee@vecc.gov.in; Barat, P. [Variable Energy Cyclotron Centre, 1/AF Bidhannagar, Kolkata 700064 (India)

2014-10-14

Pinning of dislocations at nanosized obstacles like precipitates, voids, and bubbles is a crucial mechanism in the context of phenomena like hardening and creep. The interaction between such an obstacle and a dislocation is often studied at fundamental level by means of analytical tools, atomistic simulations, and finite element methods. Nevertheless, the information extracted from such studies cannot be utilized to its maximum extent on account of insufficient information about the underlying statistics of this process comprising a large number of dislocations and obstacles in a system. Here, we propose a new statistical approach, where the statistics of pinning of dislocations by idealized spherical obstacles is explored by taking into account the generalized size-distribution of the obstacles along with the dislocation density within a three-dimensional framework. Starting with a minimal set of material parameters, the framework employs the method of geometrical statistics with a few simple assumptions compatible with the real physical scenario. The application of this approach, in combination with the knowledge of fundamental dislocation-obstacle interactions, has successfully been demonstrated for dislocation pinning at nanovoids in neutron irradiated type 316-stainless steel in regard to the non-conservative motion of dislocations. An interesting phenomenon of transition from rare pinning to multiple pinning regimes with increasing irradiation temperature is revealed.

Ultrasonic Study of Dislocation Dynamics in Lithium -

Science.gov (United States)

Han, Myeong-Deok

1987-09-01

Experimental studies of dislocation dynamics in LiF single crystals, using ultrasonic techniques combined with dynamic loading, were performed to investigate the time evolution of the plastic deformation process under a short stress pulse at room temperature, and the temperature dependence of the dislocation damping mechanism in the temperature range 25 - 300(DEGREES)K. From the former, the time dependence of the ultrasonic attenuation was understood as resulting from dislocation multiplication followed by the evolution of mobile dislocations to immobile ones under large stress. From the latter, the temperature dependence of the ultrasonic attenuation was interpreted as due to the motion of the dislocation loops overcoming the periodic Peierls potential barrier in a manner analogous to the motion of a thermalized sine-Gordon chain under a small stress. The Peierls stress obtained from the experimental results by application of Seeger's relaxation model with exponential dislocation length distribution was 4.26MPa, which is consistent with the lowest stress for the linear relation between the dislocation velocity and stress observed by Flinn and Tinder.

An experimental study of dislocation loop nucleation

International Nuclear Information System (INIS)

Bounaud, J.Y.; Leteurtre, J.

1975-01-01

The nucleation of dislocation loops is experimentally studied by observing the demixion of the Burgers vectors of dislocation loops nucleated in copper whiskers irradiated in flexion by fission fragments at room temperature. The demixion of Burgers vectors is observed by the dimensional effects of dislocation loops: after irradiation, the applied stress is removed; the whisker shows a residual strain that is due to loops because, after an annealing treatment to evaporate dislocation loops, each whisker recovers its initial straight shape. Everywhere along the whisker, the radius of curvature is measured and plotted vs the max. applied stress. Estimations of the interstitial and vacancy dislocation loop nuclei are derived [fr

Representation of dislocation cores using Nye tensor distributions

International Nuclear Information System (INIS)

Hartley, Craig S.; Mishin, Y.

2005-01-01

This paper demonstrates how the cores of atomistically simulated dislocations in Cu and Al can be represented by a distribution of infinitesimal dislocations described by appropriate components of the Nye tensor. Components calculated from atomic positions in the dislocated crystal are displayed as contour plots on the plane normal to the dislocation line. The method provides an accurate and instructive means for characterizing dislocation core structures and calculating the total Burgers vector

Structure of the Dislocation in Sapphire

DEFF Research Database (Denmark)

Bilde-Sørensen, Jørgen; Thölen, A. R.; Gooch, D. J.

1976-01-01

Experimental evidence of the existence of 01 0 dislocations in the {2 0} prism planes in sapphire has been obtained by transmission electron microscopy. By the weak-beam technique it has been shown that the 01 0 dislocations may dissociate into three partials. The partials all have a Burgers vector...... of ⅓ 01 0 and are separated by two identical faults. The distance between two partials is in the range 75-135 Å, corresponding to a fault energy of 320±60 mJ/m2. Perfect 01 0 dislocations have also been observed. These dislocations exhibited either one or two peaks when imaged in the (03 0) reflection...

Dislocation of jaws

International Nuclear Information System (INIS)

Katzberg, R.W.; Hayakawa, K.; Anderson, Q.N.; Manzione, J.V.; Helms, C.A.; Tallents, R.

1984-01-01

Pluri-directional tomographic and arthrotomographic findings are described in six patients with dislocation of the jaw severe enough to require medical assistance. A grooved defect along the posterior aspect of the condylar head was noted in two of the six patients. The arthrotomographic findings that were obtained in one patient that was dislocated at the time of the arthrogram did not suggest a meniscocondyle incoordination as a mechanism. However, arthrotomographic findings in the six reported cases suggest that significant intra-articular soft tissue damage may result. (orig.)

Mutations of the SRY-responsive enhancer of SOX9 are uncommon in XY gonadal dysgenesis.

Science.gov (United States)

Georg, I; Bagheri-Fam, S; Knower, K C; Wieacker, P; Scherer, Gerd; Harley, V R

2010-01-01

During mouse sex determination, SRY upregulates the core testis-specific enhancer of Sox9, TESCO. Mutations in human SRY are found in one third of cases with XY pure gonadal dysgenesis (XY GD; Swyer syndrome), while two thirds remain unexplained. Heterozygous SOX9 mutations can cause XY GD in association with the skeletal malformation syndrome campomelic dysplasia. We hypothesized that human TESCO mutations could cause isolated XY GD. Sixty-six XY GD cases with an intact SRY were analyzed for TESCO point mutations or deletions. No mutations were identified. We conclude that TESCO mutations are not a common cause of XY GD. Copyright © 2010 S. Karger AG, Basel.

Smectic meniscus and dislocations

International Nuclear Information System (INIS)

Geminard, J.C.; Oswald, P.; Holyst, R.

1998-01-01

In ordinary liquids the size of a meniscus and its shape is set by a competition between surface tension and gravity. The thermodynamical process of its creation can be reversible. On the contrary, in smectic liquid crystals the formation of the meniscus is always an irreversible thermodynamic process since it involves the creation of dislocations (therefore it involves friction). Also the meniscus is usually small in experiments with smectics in comparison to the capillary length and therefore the gravity does not play any role in determining the meniscus shape. Here we discuss the relation between dislocations and meniscus in smectics. The theoretical predictions are supported by a recent experiment performed on freely suspended films of smectic liquid crystals. In this experiment the measurement of the meniscus radius of curvature gives the pressure difference, Δp, according to the Laplace law. From the measurements of the growth dynamics of a dislocation loop (governed by Δp) we find the line tension (∼8 x 10 -8 dyn) and the mobility of an elementary edge dislocation (∼4 x 10 - 7 cm 2 s/g). (author)

Dynamic aspects of dislocation motion: atomistic simulations

International Nuclear Information System (INIS)

Bitzek, Erik; Gumbsch, Peter

2005-01-01

Atomistic simulations of accelerating edge and screw dislocations were carried out to study the dynamics of dislocations in a face centered cubic metal. Using two different embedded atom potentials for nickel and a simple slab geometry, the Peierls stress, the effective mass, the line tension and the drag coefficient were determined. A dislocation intersecting an array of voids is used to study dynamic effects in dislocation-obstacle interactions. A pronounced effect caused by inertial overshooting is found. A dynamic line tension model is developed which reproduces the simulation results. The model can be used to easily estimate the magnitude of inertial effects in the interaction of dislocations with localized obstacles for different obstacle strengths, -spacings and temperatures

Mapping cortical mesoscopic networks of single spiking cortical or sub-cortical neurons.

Science.gov (United States)

Xiao, Dongsheng; Vanni, Matthieu P; Mitelut, Catalin C; Chan, Allen W; LeDue, Jeffrey M; Xie, Yicheng; Chen, Andrew Cn; Swindale, Nicholas V; Murphy, Timothy H

2017-02-04

Understanding the basis of brain function requires knowledge of cortical operations over wide-spatial scales, but also within the context of single neurons. In vivo, wide-field GCaMP imaging and sub-cortical/cortical cellular electrophysiology were used in mice to investigate relationships between spontaneous single neuron spiking and mesoscopic cortical activity. We make use of a rich set of cortical activity motifs that are present in spontaneous activity in anesthetized and awake animals. A mesoscale spike-triggered averaging procedure allowed the identification of motifs that are preferentially linked to individual spiking neurons by employing genetically targeted indicators of neuronal activity. Thalamic neurons predicted and reported specific cycles of wide-scale cortical inhibition/excitation. In contrast, spike-triggered maps derived from single cortical neurons yielded spatio-temporal maps expected for regional cortical consensus function. This approach can define network relationships between any point source of neuronal spiking and mesoscale cortical maps.

Nature of Dislocations in Silicon

DEFF Research Database (Denmark)

Hansen, Lars Bruno; Stokbro, Kurt; Lundqvist, Bengt

1995-01-01

Interaction between two partial 90 degrees edge dislocations is studied with atomic-scale simulations using the effective-medium tight-binding method. A large separation between the two dislocations (up to 30 Angstrom), comparable to experimental values, is achieved with a solution of the tight-b...

Intraocular lens dislocation after whole-body vibration.

Science.gov (United States)

Vela, José I; Andreu, David; Díaz-Cascajosa, Jesús; Buil, José A

2010-10-01

We present 2 cases of intraocular lens (IOL) dislocation that appeared shortly after the patients exercised on a vibration platform. The first patient was a 71-year-old woman who presented with lens subluxation in her right eye and a complete posterior IOL dislocation in her left eye. The second case was a 62-year-old woman who presented with unilateral IOL dislocation within the capsular bag in her right eye. Timing from IOL implantation to dislocation was approximately 6 years and 4 years, respectively. Pars plana vitrectomy with removal of the dislocated IOL was performed in both patients. Whole-body vibration training has become increasingly popular as a form of exercise training. It reportedly may provide benefits in physical function and in some diseases, especially in older people. However, evidence-based protocols ensuring safety and efficacy in this population are lacking. We discuss vibration as a cause of late IOL dislocation. Copyright © 2010 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Dislocations and other topological oddities

Science.gov (United States)

Pieranski, Pawel

2016-03-01

We will show that the book Dislocations by Jacques Friedel, published half a century ago, can still be recommended, in agreement with the author's intention, as a textbook ;for research students at University and for students at engineering schools as well as for research engineers;. Indeed, today dislocations are known to occur not only in solid crystals but also in many other systems discovered more recently such as colloidal crystals or liquid crystals having periodic structures. Moreover, the concept of dislocations is an excellent starting point for lectures on topological defects occurring in systems equipped with order parameters resulting from broken symmetries: disclinations in nematic or hexatic liquid crystals, dispirations in chiral smectics or disorientations in lyotropic liquid crystals. The discussion of dislocations in Blue Phases will give us an opportunity to call on mind Sir Charles Frank, friend of Jacques Friedel since his Bristol years, who called these ephemeral mesophases ;topological oddities;. Being made of networks of disclinations, Blue Phases are similar to Twist Grain Boundary (TGB) smectic phases, which are made of networks of screw dislocations and whose existence was predicted by de Gennes in 1972 on the basis of the analogy between smectics and superconductors. We will stress that the book by Jacques Friedel contains seeds of this analogy.

Dislocations

Science.gov (United States)

... Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español First Aid: ... bones become separated. Dislocations are caused by falls and hard impacts, such as in sports injuries, and are more common in teens than ...

Dislocation dynamics in Al-Li alloys: mean jump distance and activation length of moving dislocations

International Nuclear Information System (INIS)

De Hosson, J.Th.M.; Huis Int Veld, A.

1984-01-01

It is pointed out that aluminum-lithium based alloys offer considerable promise for structural applications, especially in the aerospace industry. This promise is related to the potential for high strength in combination with a density which is lower than that found in conventional aluminum alloys. In addition, the modulus of elasticity is higher than corresponding values in conventional aluminum alloys. A nuclear magnetic resonance study of the mechanism of dislocation motion in Al-2.2 wt pct Li is reported. Information about the effective mean jump distance of mobile dislocations is provided by in situ nuclear spin relaxation measurements. The activation length of mobile dislocations has been obtained from strain-rate change experiments on Al-2.2 wt pct Li. The considered study shows that pulsed nuclear magnetic resonance is a complementary new technique for the study of moving dislocations in Al-Li alloys. 28 references

Formation of dislocation dipoles in irradiated graphite

International Nuclear Information System (INIS)

Niwase, Keisuke

2005-01-01

Recently, we have proposed a dislocation dipole accumulation model to explain the irradiation-induced amorphization of graphite. However, the structure of dislocation dipole in the hexagonal networks is still an open question at the atomic-level. In this paper, we propose a possible formation process of the dislocation dipole

Imaging findings of anterior hip dislocations

Energy Technology Data Exchange (ETDEWEB)

Pfeifer, Kyle [Mallinckrodt Institute of Radiology, Department of Radiology, St. Louis, MO (United States); Leslie, Michael [Yale School of Medicine, Department of Orthopedics and Rehabilitation, New Haven, CT (United States); Menn, Kirsten; Haims, Andrew [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States)

2017-06-15

Anterior hip dislocations are rare orthopedic emergencies resulting from high-energy trauma and have unique imaging characteristics on radiography, computed tomography (CT), and magnetic resonance imaging (MRI). Imaging findings on CT and MRI allow for the prompt recognition and classification of anterior hip dislocations, which guides patient management and reduces complications. The purpose of this article is to review imaging findings of anterior hip dislocations, specifically focusing on CT and MRI. (orig.)

High dislocation density of tin induced by electric current

International Nuclear Information System (INIS)

Liao, Yi-Han; Liang, Chien-Lung; Lin, Kwang-Lung; Wu, Albert T.

2015-01-01

A dislocation density of as high as 10 17 /m 2 in a tin strip, as revealed by high resolution transmission electron microscope, was induced by current stressing at 6.5 x 10 3 A/ cm 2 . The dislocations exist in terms of dislocation line, dislocation loop, and dislocation aggregates. Electron Backscattered Diffraction images reflect that the high dislocation density induced the formation of low deflection angle subgrains, high deflection angle Widmanstätten grains, and recrystallization. The recrystallization gave rise to grain refining

High-temperature discrete dislocation plasticity

Science.gov (United States)

Keralavarma, S. M.; Benzerga, A. A.

2015-09-01

A framework for solving problems of dislocation-mediated plasticity coupled with point-defect diffusion is presented. The dislocations are modeled as line singularities embedded in a linear elastic medium while the point defects are represented by a concentration field as in continuum diffusion theory. Plastic flow arises due to the collective motion of a large number of dislocations. Both conservative (glide) and nonconservative (diffusion-mediated climb) motions are accounted for. Time scale separation is contingent upon the existence of quasi-equilibrium dislocation configurations. A variational principle is used to derive the coupled governing equations for point-defect diffusion and dislocation climb. Superposition is used to obtain the mechanical fields in terms of the infinite-medium discrete dislocation fields and an image field that enforces the boundary conditions while the point-defect concentration is obtained by solving the stress-dependent diffusion equations on the same finite-element grid. Core-level boundary conditions for the concentration field are avoided by invoking an approximate, yet robust kinetic law. Aspects of the formulation are general but its implementation in a simple plane strain model enables the modeling of high-temperature phenomena such as creep, recovery and relaxation in crystalline materials. With emphasis laid on lattice vacancies, the creep response of planar single crystals in simple tension emerges as a natural outcome in the simulations. A large number of boundary-value problem solutions are obtained which depict transitions from diffusional to power-law creep, in keeping with long-standing phenomenological theories of creep. In addition, some unique experimental aspects of creep in small scale specimens are also reproduced in the simulations.

Electrical conduction along dislocations in plastically deformed GaN

Energy Technology Data Exchange (ETDEWEB)

Kamimura, Y; Yokoyama, T; Oiwa, H; Edagawa, K [Institute of Industrial Science, the University of Tokyo, 4-6-1 Komaba, Meguro, Tokyo 153-8505 (Japan); Yonenaga, I, E-mail: yasushi@iis.u-tokyo.ac.jp [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba, Sendai 980-8577 (Japan)

2009-07-15

Electrical conduction along dislocations in plastically deformed n-GaN single crystals has been investigated by scanning spread resistance microscopy (SSRM). In the SSRM images, many conductive spots have been observed, which correspond to electrical conduction along the dislocations introduced by deformation. Here, the introduced dislocations are b=(a/3)<1overline 210> edge dislocations parallel to the [0001] direction. The current values at the spots normalized to the background current value are larger than 100. Previous works have shown that grown-in edge dislocations in GaN are nonconductive. The high conductivity of the deformation-introduced edge dislocations in the present work suggests that the conductivity depends sensitively on the dislocation core structure.

Rare Inferior Shoulder Dislocation (Luxatio Erecta)

OpenAIRE

Cift, Hakan; Soylemez, Salih; Demiroglu, Murat; Ozkan, Korhan; Ozden, Vahit Emre; Ozkut, Afsar T.

2015-01-01

Although shoulder dislocations have been seen very frequently, inferior dislocation of shoulder constitutes only 0.5% of all shoulder dislocations. We share our 4 patients with luxatio erecta and present their last clinical control. 2 male and 2 female Caucasian patients were diagnosed as luxatio erecta. Patients’ ages were 78, 62, 65, and 76. All patients’ reduction was done by traction-abduction and contour traction maneuver in the operating room. The patients had no symptoms and no limitat...

Dysgenesis of the corpus callosum and associated malformaaation{sup :} computed tomography and magnetic resonance imaging findings; Disgenesia do corpo caloso e mas-formacoes associadas: achados de tomografia computadorizada e ressonancia magnetica

Energy Technology Data Exchange (ETDEWEB)

Montandon, Cristiano; Montandon Junior, Marcelo Eustaquio [Colegio Brasileiro de Radiologia e Diagnostico por Imagem (CBR), Sao Paulo, SP (Brazil); Ribeiro, Flavia Aparecida de Sousa; Lobo, Leonardo Valadares Barbosa; Teixeira, Kim-Ir-Sen Santos [Goias Univ., Goiania (Brazil). Hospital de Clinicas. Dept. de Diagnostico por Imagem e Anatomia Patologica]. E-mail: cabeca2@terra.com.br

2003-10-01

Callosal dysgenesis is a malformation of the corpus callosum with origins in the embryogenesis of the telencephalon. We reviewed the computed tomography and magnetic resonance imaging findings of 11 patients with callosal dysgenesis and one patient with normal corpus callosum associated with a lipoma. The patients were divided into three distinct groups: total agenesis (three patients), partial agenesis (six patients) and hypoplasia (two patients). Associated abnormalities were observed in nine patients, including Chiari II malformation (one patient), schizencephaly (one patient), interhemispheric cyst (two patients), Dandy-Walker cyst (one patient), nodular heterotopy (one patient) and lipoma of the corpus callosum (four patients). This paper presents a review that may contribute to the diagnosis of these disorders. (author)

Temporomandibular joint dislocation due to acute propranolol intoxication

Directory of Open Access Journals (Sweden)

Abbas Aghabiklooei

2010-07-01

Full Text Available Abbas Aghabiklooei1, Homan Elahi2, Babak Mostafazadeh31Department of Medical Toxicology and Forensic Medicine, Iran University of Medical Sciences, Tehran, Iran; 2Firouzgar Hospital, Department of ENT, Tehran, Iran; 3Department of Medical Toxicology and Forensic Medicine, Shaheed Beheshty University of Medical Sciences, Tehran, IranAbstract: Temporomandibular joint (TMJ dislocation has not previously been reported as a complication of beta-blocker toxicity. We are reporting two cases of TMJ dislocation resulted from acute severe intoxication with pure propranolol (PPL for the first time. Bilateral TMJ dislocation happened in two patients who were admitted to intensive care unit with diagnosis of severe acute PPL toxicity. Clinical diagnosis of TMJ dislocation was obtained by physical examination. Successful reduction was performed for both patients without subsequent recurrence in two weeks following hospital discharge. Both of our subjects had no previous history of lower jaw dislocation. There was not any risk factor for dislocation such as convulsion during admission period, recent face trauma, or oral manipulation by the medical team. This study showed that TMJ dislocation may occur after severe acute PPL toxicity probably due to spastic contraction of the lateral pterygoid muscle. This is against previously mentioned hypothesis that stated masseteric muscles contraction as the main cause of a bilateral dislocated TMJ.Keywords: propranolol, toxicity, temporomandibular joint dislocation

The epidemiology of shoulder dislocations in Oslo.

Science.gov (United States)

Liavaag, S; Svenningsen, S; Reikerås, O; Enger, M; Fjalestad, T; Pripp, A H; Brox, J I

2011-12-01

There are few previous studies on the incidence of shoulder dislocation in the general population. The aim of the study was to report the incidence of acute shoulder dislocations in the capital of Norway (Oslo) in 2009. Patients of all ages living in Oslo, sustaining a dislocation of the glenohumeral joint, were identified using electronic diagnosis registers, patient protocols, radiological registers of the hospitals, and the Norwegian Patient Register (NPR). The overall incidence rate was 56.3 [95% confidence interval (CI) 50.2-62.4] per 100,000 person-years, with rates of 82.2 (95% CI 71.7-92.8) and 30.9 (95% CI 24.5-37.3) in men and women, respectively. The incidence of primary dislocations was 26.2 (95% CI 22.1-30.4). The overall incidence of shoulder dislocations in Oslo was higher than previously reported incidences. The incidence of primary dislocations was also higher than that in previously reported studies for the general population but it was close to the incidence reported in Malmø, Sweden. © 2011 John Wiley & Sons A/S.

Atomistically-informed dislocation dynamics in FCC crystals

International Nuclear Information System (INIS)

Martinez, E.; Marian, J.; Arsenlis, A.; Victoria, M.; Martinez, E.; Victoria, M.; Perlado, J.M.

2008-01-01

Full text of publication follows. We will present a nodal dislocation dynamics (DD) model to simulate plastic processes in fcc crystals. The model explicitly accounts for all slip systems and Burgers vectors observed in fcc systems, including stacking faults and partial dislocations. We derive simple conservation rules that describe all partial dislocation interactions rigorously and allow us to model and quantify cross-slip processes, the structure and strength of dislocation junctions, and the formation of fcc-specific structures such as stacking fault tetrahedra. The DD framework is built upon isotropic non-singular linear elasticity, and supports itself on information transmitted from the atomistic scale. In this fashion, connection between the meso and micro scales is attained self-consistently with core parameters fitted to atomistic data. We perform a series of targeted simulations to demonstrate the capabilities of the model, including dislocation reactions and dissociations and dislocation junction strength. Additionally we map the four-dimensional stress space relevant for cross-slip and relate our fundings to the plastic behaviour of' monocrystalline fcc metals. (authors)

Creep Deformation by Dislocation Movement in Waspaloy.

Science.gov (United States)

Whittaker, Mark; Harrison, Will; Deen, Christopher; Rae, Cathie; Williams, Steve

2017-01-12

Creep tests of the polycrystalline nickel alloy Waspaloy have been conducted at Swansea University, for varying stress conditions at 700 °C. Investigation through use of Transmission Electron Microscopy at Cambridge University has examined the dislocation networks formed under these conditions, with particular attention paid to comparing tests performed above and below the yield stress. This paper highlights how the dislocation structures vary throughout creep and proposes a dislocation mechanism theory for creep in Waspaloy. Activation energies are calculated through approaches developed in the use of the recently formulated Wilshire Equations, and are found to differ above and below the yield stress. Low activation energies are found to be related to dislocation interaction with γ' precipitates below the yield stress. However, significantly increased dislocation densities at stresses above yield cause an increase in the activation energy values as forest hardening becomes the primary mechanism controlling dislocation movement. It is proposed that the activation energy change is related to the stress increment provided by work hardening, as can be observed from Ti, Ni and steel results.

Dislocation Dynamics in Al-Li Alloys. Mean Jump Distance and Activation Length of Moving Dislocations

NARCIS (Netherlands)

Hosson, J.Th.M. De; Huis in 't Veld, A.; Tamler, H.; Kanert, O.

1984-01-01

Pulsed nuclear magnetic resonance proved to be a complementary new technique for the study of moving dislocations in Al-Li alloys. The NMR technique, in combination with transmission electron microscopy and strain-rate change experiments have been applied to study dislocation motion in Al-2.2 wt% Li

Influence of mobile dislocations on phase separation in binary alloys

International Nuclear Information System (INIS)

Haataja, Mikko; Leonard, Francois

2004-01-01

We introduce a continuum model to describe the phase separation of a binary alloy in the presence of mobile dislocations. The kinetics of the local composition and dislocation density are coupled through their elastic fields. We show both analytically and numerically that mobile dislocations modify the standard spinodal decomposition process, and lead to several regimes of growth. Depending on the dislocation mobility and observation time, the phase separation may be accelerated, decelerated, or unaffected by mobile dislocations. For any finite dislocation mobility, we show that the domain growth rate asymptotically becomes independent of the dislocation mobility, and is faster than the dislocation-free growth rate

Dislocation Interactions in Olivine Revealed by HR-EBSD

Science.gov (United States)

Wallis, David; Hansen, Lars N.; Britton, T. Ben; Wilkinson, Angus J.

2017-10-01

Interactions between dislocations potentially provide a control on strain rates produced by dislocation motion during creep of rocks at high temperatures. However, it has been difficult to establish the dominant types of interactions and their influence on the rheological properties of creeping rocks due to a lack of suitable observational techniques. We apply high-angular resolution electron backscatter diffraction to map geometrically necessary dislocation (GND) density, elastic strain, and residual stress in experimentally deformed single crystals of olivine. Short-range interactions are revealed by cross correlation of GND density maps. Spatial correlations between dislocation types indicate that noncollinear interactions may impede motion of proximal dislocations at temperatures of 1000°C and 1200°C. Long-range interactions are revealed by autocorrelation of GND density maps. These analyses reveal periodic variations in GND density and sign, with characteristic length scales on the order of 1-10 μm. These structures are spatially associated with variations in elastic strain and residual stress on the order of 10-3 and 100 MPa, respectively. Therefore, short-range interactions generate local accumulations of dislocations, leading to heterogeneous internal stress fields that influence dislocation motion over longer length scales. The impacts of these short- and/or long-range interactions on dislocation velocities may therefore influence the strain rate of the bulk material and are an important consideration for future models of dislocation-mediated deformation mechanisms in olivine. Establishing the types and impacts of dislocation interactions that occur across a range of laboratory and natural deformation conditions will help to establish the reliability of extrapolating laboratory-derived flow laws to real Earth conditions.

Low energy dislocation structures due to unidirectional deformation at low temperatures

DEFF Research Database (Denmark)

Hansen, Niels; Kuhlmann-Wilsdorf, D.

1986-01-01

The line energy of dislocations is {Gb2f(v)/4π} 1n(R/b) with R range of the dislocation stress field from the axis. This equation implies that quasi-uniform distributions are unstable relative to dislocation clusters in which neighboring dislocations mutually screen their stress fields, correspon......The line energy of dislocations is {Gb2f(v)/4π} 1n(R/b) with R range of the dislocation stress field from the axis. This equation implies that quasi-uniform distributions are unstable relative to dislocation clusters in which neighboring dislocations mutually screen their stress fields......, correspondingly leaving the major fraction of the volume free of dislocations. The value of R decreases in the following order: pile-ups to dipolar mats, Taylor lattices, tilt and dipolar walls to dislocation cell structures. This is the same order in which dislocation structures tend to develop with increasing...... dislocation density and hence increased dislocation interactions, leading to the corresponding energy decrease per unit length of dislocation line. Taking into consideration also the longer-range “termination stresses” of finite dislocation boundaries, and minimizing the total energy, explains the size...

Electron-dislocation interaction at low temperatures. Progress report

International Nuclear Information System (INIS)

1976-01-01

Studies of the interaction of mobile dislocations with electrons have shown that dislocation motion can be, in part, described by treating the dislocation as an underdamped oscillator. In particular, studies in lead alloys have shown tht dislocation motion can be considered as the motion of string, slightly damped by electrons, without regard for any other lattice friction. In addition we have shown that silver solutes, in lead crystals, occupy, partially, interstitial sites. Finally, we have shown that dislocations in copper interact, unexpectedly, with electrons. This is shown by measuring the influence of a magnetic field on the flow stress of copper crystals at 4.2 0 K

Generalized dynamics of moving dislocations in quasicrystals

International Nuclear Information System (INIS)

Agiasofitou, Eleni; Lazar, Markus; Kirchner, Helmut

2010-01-01

A theoretical framework for dislocation dynamics in quasicrystals is provided according to the continuum theory of dislocations. Firstly, we present the fundamental theory for moving dislocations in quasicrystals giving the dislocation density tensors and introducing the dislocation current tensors for the phonon and phason fields, including the Bianchi identities. Next, we give the equations of motion for the incompatible elastodynamics as well as for the incompatible elasto-hydrodynamics of quasicrystals. We continue with the derivation of the balance law of pseudomomentum thereby obtaining the generalized forms of the Eshelby stress tensor, the pseudomomentum vector, the dynamical Peach-Koehler force density and the Cherepanov force density for quasicrystals. The form of the dynamical Peach-Koehler force for a straight dislocation is obtained as well. Moreover, we deduce the balance law of energy that gives rise to the generalized forms of the field intensity vector and the elastic power density of quasicrystals. The above balance laws are produced for both models. The differences between the two models and their consequences are revealed. The influences of the phason fields as well as of the dynamical terms are also discussed.

Irreducible Traumatic Posterior Shoulder Dislocation

Directory of Open Access Journals (Sweden)

Blake Collier

2017-01-01

Full Text Available History of present illness: A 22-year-old male presented to the Emergency Department complaining of right shoulder pain after a motocross accident. He was traveling at approximately 10 mph around a turn when he lost control and was thrown over the handlebars, landing directly on his right shoulder. On arrival, he was holding his arm in adduction and internal rotation. An area of swelling was noted over his anterior shoulder. He was unable to abduct his shoulder. No humeral gapping was noted. He had normal neuro-vascular status distal to the injury. Significant findings: Radiographs demonstrated posterior displacement of the humeral head on the “Y” view (see white arrow and widening of the glenohumeral joint space on anterior-posterior view (see red arrow. The findings were consistent with posterior dislocation and a Hill-Sachs type deformity. Sedation was performed and reduction was attempted using external rotation, traction counter-traction. An immediate “pop” was felt during the procedure. Post-procedure radiographs revealed a persistent posterior subluxation with interlocking at posterior glenoid. CT revealed posterior dislocation with acute depressed impaction deformity medial to the biceps groove with the humeral head perched on the posterior glenoid, interlocked at reverse Hill-Sachs deformity (see blue arrow. Discussion: Posterior shoulder dislocations are rare and represent only 2% of all shoulder dislocations. Posterior shoulder dislocations are missed on initial diagnosis in more than 60% of cases.1 Posterior shoulder dislocations result from axial loading of the adducted and internally rotated shoulder, violent muscle contractions (resulting from seizures or electrocution, a direct posterior force applied to the anterior shoulder.1 Physical findings include decreased anterior prominence of the humeral head, increased palpable posterior prominence of the humeral head below the acromion, increased palpable prominence of the

Molecular dynamics simulation of dislocations in uranium dioxide

Energy Technology Data Exchange (ETDEWEB)

Fossati, Paul [CEA, DEN, DPC, SCCME, F-91191 Gif-sur-Yvette Cedex (France); Van Brutzel, Laurent, E-mail: laurent.vanbrutzel@cea.fr [CEA, DEN, DPC, SCCME, F-91191 Gif-sur-Yvette Cedex (France); Devincre, Benoît [LEM, CNRS-ONERA, 29 avenue de la Division Leclerc, F-92322 Châtillon Cedex (France)

2013-11-15

The plasticity of the fluorite structure in UO{sub 2} is investigated with molecular dynamics simulation and empirical potential. The stacking fault energies and the dislocation core structures with Burgers vector a/2 〈110〉 are systematically calculated. All dislocation core structures show a significant increase of the oxygen sub-lattice disorder at temperatures higher than 1500 K. The threshold stress for dislocation glide is found to decrease with increasing temperature but its values is always very high, several GPa at 0 K and several hundred of MPa at 2000 K. A relation between the dislocation mobility dependence with temperature and the increase of the oxygen sub-lattice disorder in the dislocation cores is established.

Metastablity of the undissociated state of dissociated dislocations

International Nuclear Information System (INIS)

Takeuchi, Shin

2005-01-01

Undissociated, metastable dislocations have been observed in various crystals in addition to stable dissociated dislocations by high-resolution transmission electron microscopy. The origin of the metastablity of the undissociated state has been discussed specifically for the dissociation into Shockley partial dislocations in fcc or hcp lattice. It is shown that the metastability is due either to a high Peierls-Nabarro stress larger than a few percent of the shear modulus of the partial dislocations and/or to the increase of the total core energy by an increase of the dangling bonds. The metastablity of undissociated dislocations in zincblende III-V compounds is concluded to be due to a contribution of the latter effect

Caudal dysgenesis, sirenomelia, and situs inversus totalis: a primitive defect in blastogenesis.

Science.gov (United States)

Rougemont, Anne-Laure; Bouron-Dal Soglio, Dorothée; Désilets, Valérie; Jovanovic, Mubina; Perreault, Gilles; Laurier Oligny, Luc; Fournet, Jean-Christophe

2008-06-01

Caudal dysgenesis (CD) constitutes a heterogeneous spectrum of congenital caudal anomalies, including varying degrees of agenesis of the vertebral column, as well as anorectal and genitourinary anomalies. Sirenomelia, characterized by a fusion of the lower limbs, could represent the most severe end of this spectrum. The two main debated pathogenic hypotheses are an aberrant vascular supply versus a primary axial mesoderm defect. We present the autopsy findings of two fetuses of non-diabetic mothers, with normal karyotype. Both fetuses presented situs inversus associated with a CD, in one case consisting of sirenomelia, establishing a very rare association profile that might be random. This association also suggests the occurrence of a common pathogenic mechanism, in accordance to recent genetic data, such as displayed in the Kif3A murine mutation phenotype. Some cases of sirenomelia and CD could represent developmental field defects of blastogenesis involving the caudal mesoderm, rather than being related to vascular insufficiency.

Atomic-scale dislocation dynamics in radiation damage environment

International Nuclear Information System (INIS)

Osetsky, Y.; Stoller, R.; Bacon, D.J.

2007-01-01

Full text of publication follows: The dynamics behavior of dislocations determines mechanical properties of crystalline materials. Long-range interactions between a moving dislocation and other defects can be treated within a continuum approach via interaction of their stress and strain fields. However, a vast contribution to mechanical properties depends on the direct interaction between dislocations and other defects and depends very much on the particular atomic scale structure of the both moving dislocation core and the obstacle. In this work we review recent progress in large-scale modeling of dislocation dynamics in metals at the atomic level by molecular dynamics and statics. We review the modem techniques used to simulate dynamics of dislocations in different lattice structures, the dependence on temperature, strain rate and obstacle size. Examples are given for bcc, fcc and hcp metals where edge and screw dislocations interact with vacancy (loops, voids, stacking fault tetrahedra, etc), self-interstitial clusters and secondary phase precipitates. Attention is paid to interpretation of atomistic results from the point of view of parameterization of continuum models. The latter is vitally necessary for further application in 3-dimensional dislocation dynamics within the multi-scale materials modeling approach. Research sponsored by the Division of Materials Sciences and Engineering and the Office of Fusion Energy Sciences, U.S. Department of Energy, under contract DE-AC0S-00OR22725 with UT-Battelle, LLC. (authors)

Interactions between Dislocations and Grain Boundaries

NARCIS (Netherlands)

Soer, Wouter Anthon

2006-01-01

Dislocations (line defects) and grain boundaries (planar defects) are two types of lattice defects that are crucial to the deformation behavior of metals. Permanent deformation of a crystalline material is microscopically associated with the nucleation and propagation of dislocations, and extensive

Hydrogen diffusion in the elastic fields of dislocations in iron

Energy Technology Data Exchange (ETDEWEB)

Sivak, A. B., E-mail: Sivak-AB@nrcki.ru; Sivak, P. A. [National Research Centre Kurchatov Institute (Russian Federation); Romanov, V. A.; Chernov, V. M. [National Research Tomsk State University (Russian Federation)

2016-12-15

The effect of dislocation stress fields on the sink efficiency thereof is studied for hydrogen interstitial atoms at temperatures of 293 and 600 K and at a dislocation density of 3 × 10{sup 14} m{sup –2} in bcc iron crystal. Rectilinear full screw and edge dislocations in basic slip systems 〈111〉(110), 〈111〉(112), 〈100〉(100), and 〈100〉(110) are considered. Diffusion of defects is simulated by means of the object kinetic Monte Carlo method. The energy of interaction between defects and dislocations is calculated using the anisotropic theory of elasticity. The elastic fields of dislocations result in a less than 25% change of the sink efficiency as compared to the noninteracting linear sink efficiency at a room temperature. The elastic fields of edge dislocations increase the dislocation sink efficiency, whereas the elastic fields of screw dislocations either decrease this parameter (in the case of dislocations with the Burgers vector being 1/2〈111〉) or do not affect it (in the case of dislocations with the Burgers vector being 〈100〉). At temperatures above 600 K, the dislocations affect the behavior of hydrogen in bcc iron mainly owing to a high binding energy between the hydrogen atom and dislocation cores.

Nanoscale dislocation shear loops at static equilibrium and finite temperature

Science.gov (United States)

Dang, Khanh; Capolungo, Laurent; Spearot, Douglas E.

2017-12-01

Atomistic simulations are used to determine the resolved shear stress necessary for equilibrium and the resulting geometry of nanoscale dislocation shear loops in Al. Dislocation loops with different sizes and shapes are created via superposition of elemental triangular dislocation displacement fields in the presence of an externally imposed shear stress. First, a bisection algorithm is developed to determine systematically the resolved shear stress necessary for equilibrium at 0 K. This approach allows for the identification of dislocation core structure and a correlation between dislocation loop size, shape and the computed shear stress for equilibrium. It is found, in agreement with predictions made by Scattergood and Bacon, that the equilibrium shape of a dislocation loop becomes more circular with increasing loop size. Second, the bisection algorithm is extended to study the influence of temperature on the resolved shear stress necessary for stability. An approach is presented to compute the effective lattice friction stress, including temperature dependence, for dislocation loops in Al. The temperature dependence of the effective lattice friction stress can be reliably computed for dislocation loops larger than 16.2 nm. However, for dislocation loops smaller than this threshold, the effective lattice friction stress shows a dislocation loop size dependence caused by significant overlap of the stress fields on the interior of the dislocation loops. Combined, static and finite temperature atomistic simulations provide essential data to parameterize discrete dislocation dynamics simulations.

Work softening in nanocrystalline materials induced by dislocation annihilation

DEFF Research Database (Denmark)

Ungar, Tamas; Li, Li; Tichy, Geza

2011-01-01

Cold rolling reduces the quantity of dislocation densities in Ni–18% Fe alloys prepared by electrochemical deposition. The dislocation density evolution proposed earlier for the linearly decreasing work-hardening rate during stage III is revisited. The solution of the differential equation predicts...... that when the initial dislocation density is smaller or larger than the saturation value, then the dislocation density will increase or decrease during further plastic deformation. The predictions are verified by experimental values of dislocation densities determined by X-ray line-profile analysis....

An irreducible ankle fracture dislocation: the Bosworth injury

NARCIS (Netherlands)

Schepers, Tim; Hagenaars, Tjebbe; den Hartog, Dennis

2012-01-01

Irreducible fracture dislocations of the ankle are rare and represent true orthopedic emergencies. We present a case of a fracture dislocation that was irreducible owing to a fixed dislocation of the proximal fibular fragment posterior to the lateral ridge of the tibia. This particular type of

Temporomandibular joint dislocation in an epileptic and mentally ...

African Journals Online (AJOL)

Theories regarding the pathogenesis of TMJ dislocation propose laxity of TMJ ligaments or capsule, excessive activity of the lateral pterygoid muscle (LPM)and erosion of the eminence'. TMJ dislocation can occur in an anterior, posterior, lateral and superior direction'. Clinical presentation of dislocated TMJ includes inability ...

Dissociated dislocations in Ni: a computational study

International Nuclear Information System (INIS)

Szelestey, P.; Patriarca, M.; Kaski, K.

2005-01-01

A systematic computational study of the behavior of a (1/2) dissociated screw dislocation in fcc nickel is presented, in which atomic interactions are described through an embedded-atom potential. A suitable external stress is applied on the system, both for modifying the equilibrium separation distance d and moving the dislocation complex. The structure of the dislocation and its corresponding changes during the motion are studied in the framework of the two-dimensional Peierls model, for different values of the ratio d/a', where a' is the period of the Peierls potential. The distance between the edge and screw components of the partials, as well as their widths, undergo a modulation with period a', as the dislocation moves, and the amplitudes of such oscillations are shown to depend on d/a'. The stress profile acting on the dislocation complex is analyzed and the effective Peierls stress is estimated for different values of d/a'

Dislocation density changes in nickel under creep

International Nuclear Information System (INIS)

Moiseeva, I.V.; Okrainets, P.N.; Pishchak, V.K.

1984-01-01

Variation in dislocation density was studied in the process of nickel creep p at t=900 deg c and σ=2 kgf/mm 2 . The dislocation structure was studied independently by the X-ray technique and transmission electron-microscopy. The e two methods show good conformity of results by comparison. It is concluded that independent determination of dislocation density under creep is possible us sing the X-ray technique

Lack of experience is a significant factor in the missed diagnosis of perilunate fracture dislocation or isolated dislocation

Directory of Open Access Journals (Sweden)

Ilker Çolak

2018-01-01

Conclusion: The results of this study indicated that lack of experience was the most important factor in the misdiagnosis of perilunate fracture dislocation or isolated dislocation. Level of Evidence: Level IV, diagnostic study.

Gradients of geometrically necessary dislocations from white beam microdiffraction

International Nuclear Information System (INIS)

Barabash, R.I.; Ice, G.E.; Pang, J.W.L.

2005-01-01

Variations in the local crystallographic orientation due to the presence of geometrically necessary dislocations and dislocation boundaries smear the distribution of intensity near Laue reflections. Here, some simple model distributions of geometrically necessary dislocations, GNDs, are used to estimate the dislocation tensor field from the intensity distribution of Laue peaks. Streaking of the Laue spots is found to be quantitatively and qualitatively distinct depending on the ratio between the absorption coefficient and the GND density gradient. In addition, different slip systems cause distinctly different Laue-pattern streaking. Experimental Laue patterns are therefore sensitive to stored dislocations and GNDs. As an example, white beam microdiffraction was applied to characterize the dislocation arrangement in a deformed polycrystalline Ni grain during in situ uniaxial tension

Ultrasound as a probe of dislocation density in aluminum

International Nuclear Information System (INIS)

Mujica, Nicolás; Cerda, Maria Teresa; Espinoza, Rodrigo; Lisoni, Judit; Lund, Fernando

2012-01-01

Graphical abstract: Display Omitted - Abstract: Dislocations are at the heart of the plastic behavior of crystalline materials yet it is notoriously difficult to perform quantitative, non-intrusive measurements of their single or collective properties. Dislocation density is a critical variable that determines dislocation mobility, strength and ductility. On the one hand, individual dislocations can be probed in detail with transmission electron microscopy. On the other hand, their collective properties must be simulated numerically. Here we show that ultrasound technology can be used to measure dislocation density. This development rests on theory—a generalization of the Granato–Lücke theory for the interaction of elastic waves with dislocations—and resonant ultrasound spectroscopy (RUS) measurements. The chosen material is aluminum, to which different dislocation contents were induced through annealing and cold-rolling processes. The dislocation densities obtained with RUS compare favorably with those inferred from X-ray diffraction, using the modified Williamson–Hall method.

Medial subtalar dislocation: Case report

Directory of Open Access Journals (Sweden)

Manojlović Radovan

2010-01-01

Full Text Available Introduction. Subtalar dislocation (SI is a term that refers to an injury in which there is dislocation of the talonavicular and talocalcanear joint, although the tibiotalar joint is intact. Case Outline. A case of medial subtalar dislocation as a result of basketball injury, so-called 'basketball foot', is presented. Closed reposition in i.v. anaesthesia was performed with the patient in supine position and a knee flexed at 90 degrees. Longitudinal manual traction in line of deformity was carried out in plantar flexion. The reposition continued with abduction and eversion simultaneously increasing dorsiflexion. It was made in the first attempt and completed instantly. Rehabilitation was initiated after 5 weeks of immobilization. One year after the injury, the functional outcome was excellent with full range of motion and the patient was symptom-free. For better interpretation of roentgenogram, bone model of subtalar dislocation was made using the cadaver bone. Conclusion. Although the treatment of such injury is usually successful, diagnosis can be difficult because it is a rare injury, and moreover, X-ray of the injury can be confusing due to superposition of bones. Radiograms revealed superposition of the calcaneus, tarsal and metatarsal bones which was radiographically visualized in the anterior-posterior projection as one osseous block inward from the talus, and on the lateral view as in an osteal block below the tibial bone. Prompt recognition of these injuries followed by proper, delicately closed reduction under anaesthesia is crucial for achieving a good functional result in case of medial subtalar dislocation.

Transition pathways in the unfaulting of dislocation loops

International Nuclear Information System (INIS)

Kubota, Alison; Wolfer, W.G.

2005-01-01

In order to study the dynamic mechanism of loop unfaulting, we performed large-scale classical molecular dynamics simulations involving computational cells with several millions of atoms. To induce dislocation loop unfaulting, we launched 1 ps duration traction stress pulses at a free surface of the computational box. In many cases, we observe unfaulting to involve both intuitive and complex dislocation processes with multiple Shockley partial dislocations. However, in some instances, we observe unfaulting to occur by a sudden instability of the stacking fault without clear traces of dislocation reactions

Palmar dislocation of scaphoid and lunate

Directory of Open Access Journals (Sweden)

Khalid Koulali Idrissi

2011-11-01

Full Text Available A palmar dislocation of scaphoid and lunate is uncommon. We have found only 19 reported cases in the literature. We reported a simultaneous, divergent dislocation. The closed reduction followed by percutaneous pinning has given a good result without avascular necrosis of any carpal bone.

[New varieties of lateral metatarsophalangeal dislocations of the great toe].

Science.gov (United States)

Bousselmame, N; Rachid, K; Lazrak, K; Galuia, F; Taobane, H; Moulay, I

2001-04-01

We report seven cases of traumatic dislocation of the great toe, detailing the anatomy, the mechanism of injury and the radiographic diagnosis. We propose an additional classification based on three hereto unreported cases. Between october 1994 and october 1997, we treated seven patients with traumatic dislocation of the first metatarso-phalangeal joint of the great toe. There were six men and one woman, mean age 35 years (range 24 - 44 years). Dislocation was caused by motor vehicle accidents in four cases and by falls in three. Diagnosis was made on anteroposterior, lateral and medial oblique radiographs. According to Jahss' classification, there was one type I and three type IIB dislocations. There was also one open lateral dislocation and two dorsomedial dislocations. Only these dorsomedial dislocations required open reduction, done via a dorsal approach. Mean follow-up was 17.5 months (range 9 - 24 months) in six cases. One patient was lost to follow-up. The outcome was good in six cases and poor in one (dorsomedial dislocation). Dislocation of the first metatarso-phalangeal joint of the great toe is an uncommon injury. In 1980, Jahss reported two cases and reviewed three others described in the literature. He proposed three types of dislocation based on the feasibility of closed reduction (type I, II and IIB). In 1991, Copeland and Kanat reported a unique case in which there was an association of IIA and IIB lesions. They proposed an addition to the classification (type IIC). In 1994, Garcia Mata et al. reported another case which had not been described by Jahss and proposed another addition. All dislocations reported to date have been sagittal dislocations. Pathological alteration of the collateral ligaments has not been previously reported. In our experience, we have seen one case of open lateral dislocation due, at surgical exploration, to medial ligament rupture and two cases of dorsomedial dislocation due, at surgical exploration, to lateral ligament

Dislocation structure and cold resistance of low-carbon steel

International Nuclear Information System (INIS)

Gul', Yu.P.; Karnaukh, A.I.

1975-01-01

In the formation of the dislocation structure of a small (10%) deformation, the determining effect on the cold brittleness temperature is exerted by the degree of uniformity in the distribution of dislocations and microvolumes. The overall density of the dislocations is of secondary importance here. By pretreatment to achieve more uniform distribution and dispersion of particles of the excess phase, the degree of uniformity of dislocation distribution in microvolumes can be increased, the cold brittleness temperature lowered and the effect of various deformation patterns on resistance to cold counterbalanced. The formation of a cell-type dislocation structure in the case of a nonuniform distribution of relatively large particles of the excess phase and in that of a large overall density of dislocations does not result in low brittleness temperatures. The formation of a cell-type dislocation structure in the case of uniform distribution of particles of the excess phase and of a comparatively small overall density of dislocations is accompanied by a very pronounced decrease in cold brittleness temperature not only by comparison with other types of dislocation structure but also with the normalized state. At the same time the formation of this kind of a cell structure leads to a substantial (factor of 2-5) increase in resistance to plastic deformation. The prerequisites for obtaining an optimum dislocation are fulfilled either by a combination of hardening from the austenitic region and prompt, small-scale (5%) deformation, or by a combination of accelerated cooling from the austenitic region, 30-40% deformation and high yield. The size of the dislocation cells observed under the electron microscope does not exhibit - within the limits investigated - any direct effect on the cold brittleness temperature. (author)

Dislocation defect interaction in irradiated Cu

International Nuclear Information System (INIS)

Schaeublin, R.; Yao, Z.; Spaetig, P.; Victoria, M.

2005-01-01

Pure Cu single crystals irradiated at room temperature to low doses with 590 MeV protons have been deformed in situ in a transmission electron microscope in order to identify the basic mechanisms at the origin of hardening. Cu irradiated to 10 -4 dpa shows at room temperature a yield shear stress of 13.7 MPa to be compared to the 8.8 MPa of the unirradiated Cu. Irradiation induced damage consists at 90% of 2 nm stacking fault tetrahedra, the remaining being dislocation loops and unidentified defects. In-situ deformation reveals that dislocation-defect interaction can take several forms. Usually, dislocations pinned by defects bow out under the applied stress and escape without leaving any visible defect. From the escape angles obtained at 183 K, an average critical stress of 100 MPa is deduced. In some cases, the pinning of dislocations leads to debris that are about 20 nm long, which formation could be recorded during the in situ experiment

Prediction of dislocation boundary characteristics

DEFF Research Database (Denmark)

Winther, Grethe

Plastic deformation of both fcc and bcc metals of medium to high stacking fault energy is known to result in dislocation patterning in the form of cells and extended planar dislocation boundaries. The latter align with specific crystallographic planes, which depend on the crystallographic......) and it is found that to a large extent the dislocations screen each other’s elastic stress fields [3]. The present contribution aims at advancing the previous theoretical analysis of a boundary on a known crystallographic plane to actual prediction of this plane as well as other boundary characteristics....... Crystal plasticity calculations combined with the hypothesis that these boundaries separate domains with local differences in the slip system activity are introduced to address precise prediction of the experimentally observed boundaries. The presentation will focus on two cases from fcc metals...

Modeling of dislocation dynamics in germanium Czochralski growth

Science.gov (United States)

Artemyev, V. V.; Smirnov, A. D.; Kalaev, V. V.; Mamedov, V. M.; Sidko, A. P.; Podkopaev, O. I.; Kravtsova, E. D.; Shimansky, A. F.

2017-06-01

Obtaining very high-purity germanium crystals with low dislocation density is a practically difficult problem, which requires knowledge and experience in growth processes. Dislocation density is one of the most important parameters defining the quality of germanium crystal. In this paper, we have performed experimental study of dislocation density during 4-in. germanium crystal growth using the Czochralski method and comprehensive unsteady modeling of the same crystal growth processes, taking into account global heat transfer, melt flow and melt/crystal interface shape evolution. Thermal stresses in the crystal and their relaxation with generation of dislocations within the Alexander-Haasen model have been calculated simultaneously with crystallization dynamics. Comparison to experimental data showed reasonable agreement for the temperature, interface shape and dislocation density in the crystal between calculation and experiment.

Mechanism of Strain Rate Effect Based on Dislocation Theory

International Nuclear Information System (INIS)

Kun, Qin; Shi-Sheng, Hu; Li-Ming, Yang

2009-01-01

Based on dislocation theory, we investigate the mechanism of strain rate effect. Strain rate effect and dislocation motion are bridged by Orowan's relationship, and the stress dependence of dislocation velocity is considered as the dynamics relationship of dislocation motion. The mechanism of strain rate effect is then investigated qualitatively by using these two relationships although the kinematics relationship of dislocation motion is absent due to complicated styles of dislocation motion. The process of strain rate effect is interpreted and some details of strain rate effect are adequately discussed. The present analyses agree with the existing experimental results. Based on the analyses, we propose that strain rate criteria rather than stress criteria should be satisfied when a metal is fully yielded at a given strain rate. (condensed matter: structure, mechanical and thermal properties)

Piles of dislocation loops in real crystals

International Nuclear Information System (INIS)

Dubinko, V.I.; Turkin, A.A.; Yanovskij, V.V.

1985-01-01

Behaviour of piles of dislocation loops in crystals was studied in order to define metal swelling under irradiation. Energy of pile interaction with point defects and intrinsic pile energy are studied in the framework of the linear elasticity theory. Preference of dislocation pile calculated in the paper decreases with radiation dose hence, material swelling rate also decreases. Creation of conditions, which assume an existence of piles of dislocation loops being stable under irradiation, is of particular interest

Axillary artery injury secondary to inferior shoulder dislocation.

Science.gov (United States)

Plaga, Brad R; Looby, Peter; Feldhaus, Steven J; Kreutzmann, Karl; Babb, Aaron

2010-11-01

Dislocation injuries of the glenohumeral joint are common in the general public and generally are corrected without complication. One serious complication with shoulder dislocations, or the subsequent reduction, is a lesion to the axillary artery. This specific complication is most frequently seen in the elderly population, where vascular structures have become less flexible. Also, these injuries are most common in association with anterior dislocations of the shoulder. To bring awareness to the possibility of axillary artery injury with inferior dislocation of the shoulder, the treatment options, and a review. We report a 15-year-old male athlete who inferiorly dislocated his shoulder during wrestling practice. The injury was reduced at the scene with manual traction and the patient was transferred to our clinic for evaluation. The patient was determined to have a pseudoaneurysm of the axillary artery, and the history and treatment of the illness are presented. Axillary artery injuries secondary to shoulder dislocations are rare, especially in the young athlete, and proper recognition and treatment offer patients a full recovery. Copyright © 2010. Published by Elsevier Inc.

Electron-dislocation interaction at low temperatures. Progress report

International Nuclear Information System (INIS)

1978-01-01

The interaction of mobile dislocations with electrons in copper and copper alloys has shown that dislocation motion in copper, at low temperature, can be treated as an analog of an underdamped oscillator. We have also shown that the viscous drag on mobile dislocations in type II superconductors can be treated as an acoustic attenuation of an elastic wave

Formation of disorientations in dislocation structures during plastic deformation

DEFF Research Database (Denmark)

Pantleon, W.

2002-01-01

Disorientations developing during plastic deformation in dislocation structures are investigated. Based on expected mechanisms for the formation of different types of dislocation boundaries (statistical trapping of dislocations or differently activated slip systems) the formation of the disorient...

Thermodynamic theory of dislocation-enabled plasticity

International Nuclear Information System (INIS)

Langer, J. S.

2017-01-01

The thermodynamic theory of dislocation-enabled plasticity is based on two unconventional hypotheses. The first of these is that a system of dislocations, driven by external forces and irreversibly exchanging heat with its environment, must be characterized by a thermodynamically defined effective temperature that is not the same as the ordinary temperature. The second hypothesis is that the overwhelmingly dominant mechanism controlling plastic deformation is thermally activated depinning of entangled pairs of dislocations. This paper consists of a systematic reformulation of this theory followed by examples of its use in analyses of experimentally observed phenomena including strain hardening, grain-size (Hall-Petch) effects, yielding transitions, and adiabatic shear banding.

Pair Interaction of Dislocations in Two-Dimensional Crystals

Science.gov (United States)

Eisenmann, C.; Gasser, U.; Keim, P.; Maret, G.; von Grünberg, H. H.

2005-10-01

The pair interaction between crystal dislocations is systematically explored by analyzing particle trajectories of two-dimensional colloidal crystals measured by video microscopy. The resulting pair energies are compared to Monte Carlo data and to predictions derived from the standard Hamiltonian of the elastic theory of dislocations. Good agreement is found with respect to the distance and temperature dependence of the interaction potential, but not regarding the angle dependence where discrete lattice effects become important. Our results on the whole confirm that the dislocation Hamiltonian allows a quantitative understanding of the formation and interaction energies of dislocations in two-dimensional crystals.

Dislocation Structures in Creep-deformed Polycrystalline MgO

DEFF Research Database (Denmark)

Bilde-Sørensen, Jørgen

1972-01-01

dislocation segments lie in their slip or climb planes. On the basis of this structure, a model is proposed in which glide is the principal cause of deformation but the rate-limiting process, i.e. annealing of the network, is diffusion-controlled. Theoretical estimates and experimental results agree within 1...... energy of 76 ± 12 kcal/mol. The creep rate is independent of grain size. The dislocation structure was investigated by transmission electron microscopy. The total dislocation density follows the relation, σ=bG√ρ, commonly found for metals. The dislocations form a 3-dimensional network in which many...

Thermal activation of dislocations in large scale obstacle bypass

Science.gov (United States)

Sobie, Cameron; Capolungo, Laurent; McDowell, David L.; Martinez, Enrique

2017-08-01

Dislocation dynamics simulations have been used extensively to predict hardening caused by dislocation-obstacle interactions, including irradiation defect hardening in the athermal case. Incorporating the role of thermal energy on these interactions is possible with a framework provided by harmonic transition state theory (HTST) enabling direct access to thermally activated reaction rates using the Arrhenius equation, including rates of dislocation-obstacle bypass processes. Moving beyond unit dislocation-defect reactions to a representative environment containing a large number of defects requires coarse-graining the activation energy barriers of a population of obstacles into an effective energy barrier that accurately represents the large scale collective process. The work presented here investigates the relationship between unit dislocation-defect bypass processes and the distribution of activation energy barriers calculated for ensemble bypass processes. A significant difference between these cases is observed, which is attributed to the inherent cooperative nature of dislocation bypass processes. In addition to the dislocation-defect interaction, the morphology of the dislocation segments pinned to the defects play an important role on the activation energies for bypass. A phenomenological model for activation energy stress dependence is shown to describe well the effect of a distribution of activation energies, and a probabilistic activation energy model incorporating the stress distribution in a material is presented.

Dechanneling by dislocation loops

International Nuclear Information System (INIS)

Chalant, Gerard.

1976-09-01

Ion implantation always induces the creation of dislocation loops. When the damage profile is determined by a backscattering technique, the dechanneling by these loops is implicitely at the origin of these measurements. The dechanneling of alpha particles by dislocation loops produced by the coalescence of quenched-in vacancies in aluminium is studied. The dechanneling and the concentration of loops were determined simultaneously. The dechanneling width around dislocation was found equal to lambda=6A, both for perfect and imperfect loops having a mean diameter d=250A. In the latter case, a dechanneling probability chi=0.34 was determined for the stacking fault, in good agreement with previous determination in gold. A general formula is proposed which takes into account the variation of lambda with the curvature (or the diameter d) of the loops. Finally, by a series of isothermal anneals, the self-diffusion energy ΔH of aluminium was measured. The value obtained ΔH=1.32+-0.10eV is in good agreement with the values obtained by other methods [fr

Lens dislocation has a possible relationship with laser iridotomy

Directory of Open Access Journals (Sweden)

Mutoh T

2012-12-01

Full Text Available Tetsuya Mutoh,1,2 Kevin F Barrette,2 Yukihiro Matsumoto,1 Makoto Chikuda11Department of Ophthalmology, Dokkyo Medical University Koshigaya Hospital, Koshigaya City, Saitama, Japan; 2Department of Ophthalmology, Boston University School of Medicine, Boston, MA, USAAbstract: We report our recent experience of four eyes with spontaneous lens dislocation in four patients with no history of trauma or any systemic disease associated with zonular dialysis. Lens dislocation developed with 0.5 to 6 months following laser iridotomy. All patients were male and two eyes were complicated with acute primary angle closure glaucoma preoperatively. Case 1 showed bilateral lens dislocation, while cases 2 and 3 involved unilateral lens dislocation. Cases 2 and 3 showed lenses completely dislocated into the vitreous cavity. All cases needed lens removal and scleral fixation of intraocular lenses. Final visual acuity was 1.2 in all cases. We suspect that laser iridotomy may induce localized zonular dialysis that results in progressive zonular weakness, leading to lens dislocation.Keywords: lens dislocation, laser iridotomy, primary angle closure glaucoma

Thermally activated dislocation motion including inertial effects in solid solutions

International Nuclear Information System (INIS)

Isaac, R.D.

1977-01-01

Dislocation motion through an array of obstacles is considered in terms of the potential energy of the dislocation as it moves through the array. The obstacles form a series of potential wells and barriers which can trap the dislocations. The effect of thermal fluctuations and of a viscous drag on the motion of the dislocation is investigated by analogy with Brownian motion in a field of force. The rate of escape of a trapped dislocation is found to depend on the damping coefficient only for a large viscous drag. The probability that a dislocation will be trapped by a well or barrier is found to depend on the damping coefficient for a small viscous drag. This inertial effect determines how far a dislocation will travel after breaking away from an obstacle

Influence of strain on dislocation core in silicon

Science.gov (United States)

Pizzagalli, L.; Godet, J.; Brochard, S.

2018-05-01

First principles, density functional-based tight binding and semi-empirical interatomic potentials calculations are performed to analyse the influence of large strains on the structure and stability of a 60? dislocation in silicon. Such strains typically arise during the mechanical testing of nanostructures like nanopillars or nanoparticles. We focus on bi-axial strains in the plane normal to the dislocation line. Our calculations surprisingly reveal that the dislocation core structure largely depends on the applied strain, for strain levels of about 5%. In the particular case of bi-axial compression, the transformation of the dislocation to a locally disordered configuration occurs for similar strain magnitudes. The formation of an opening, however, requires larger strains, of about 7.5%. Furthermore, our results suggest that electronic structure methods should be favoured to model dislocation cores in case of large strains whenever possible.

Interferometric SAR and land deformation. Analysis using the dislocation model; Interferometric SAR to chikaku hendo. Dislocation model wo mochiita kaiseki

Energy Technology Data Exchange (ETDEWEB)

Matsushima, J; Otaki, T; Tanaka, A; Miyazaki, Y [Geological Survey of Japan, Tsukuba (Japan)

1996-05-01

The diastrophism by the earthquake-induced dislocation is investigated by interferometry (INSAR) which represents the diastrophism by the interference fringes of equiphase difference lines. A joint research group at Geographical Survey Institute and National Space Development Agency showed the diastrophism in the vicinity of the ground surfaces before and after the Hyogoken Nanbu Earthquake by the INSAR interference images in 1995. This paper discusses the effects of observation in the vision line direction from the satellite and dislocation parameters on the interference images. The dislocation model uses a slanted rectangular model in a semi-infinite medium, to calculate static displacements and strain distributions at the ground surface, when dislocation changes. It is found that the INSAR interference images, detecting displacements in the vision line direction from the satellite, significantly change as the vision line direction changes, and that the actual displacement cannot be given by the images alone. This paper also shows sensitivity of the interference images to the dislocation parameters. 3 refs., 9 figs., 1 tab.

Riemann–Cartan Geometry of Nonlinear Dislocation Mechanics

KAUST Repository

Yavari, Arash; Goriely, Alain

2012-01-01

but vanishing non-metricity. Torsion of the material manifold is identified with the dislocation density tensor of nonlinear dislocation mechanics. Using Cartan's moving frames we construct the material manifold for several examples of bodies with distributed

Magnetic resonance findings in knee dislocation: pictorial essay

International Nuclear Information System (INIS)

Coates, M.; Stewart, N.; Morganti, V.; Twaddle, B.

2000-01-01

The role of MRI in the preoperative assessment of knee dislocation is well documented. e present our experience with a series of images graphically displaying the spectrum of abnormalities associated with these injuries. These images were derived from a local internal audit reviewing the preoperative MRI and correlating this with the surgical findings. Twenty-two cases between April 1997 and April 1999 were reviewed. Traumatic dislocation of the knee is rare, although many believe it is often unrecognized because of spontaneous reduction.' The injury may present as (i) frank dislocation; (ii) a knee that is dislocated while under anaesthesia; or (iii) a pattern of soft-tissue injury which suggests dislocation. Dislocation is described by the position of the tibia relative to the femur and may be anterior, posterior, lateral, medial or rotatory. Conservative management has traditionally been advocated and in this setting clinical examination and plain radiographs are adequate. Because of the trend toward increased surgical intervention, however, the more accurate characterization of soft-tissue injuries provided by MRI aids the planning of ligamentous reconstruction and the operative approach. Copyright (1999) Blackwell Science Pty Ltd

On verification of a theory in dislocation plasticity

International Nuclear Information System (INIS)

Ng, D.H.Y.; Lee, L.H.N.

1981-01-01

In the past twenty years, many attempts to unify the theories of macroplasticity and microplasticity in polycrystalline materials have been made. Several major approaches have been suggested namely: the geometrical approach, the analytical approach, the phenomenological approach and the internal variables approach. To verify the plasticity theory based on any one of the above models, detail experimental data including microstructural quantities such as dislocation density, dislocation speed, etc. are required. Unfortunately, there were some difficulties in evaluating dislocation speed and dealing with the term 'mobile fraction' of dislocation density. Therefore, an experimental verification of such plasticity theory has not been made. A dislocation velocity equation based on a thermally activated model is used. A set of plastic strain rate equations for polycrystalline materials formulated by analyzing dislocation dynamics in a statistical approach are presented. In order to evaluate the activation free energy, Gibbs' modified tetragonal distortion model is used together with some measurements obtained from electron micrographs. Experimental results on the dynamic yielding and fracture of 6061-T6 aluminum alloy tubings under biaxial loadings obtained by Ng, Delich and Lee are used. In dealing with 'mobile fraction', Gilman's suggestion is adopted. (orig./HP)

Dislocation core structures in (0001) InGaN

International Nuclear Information System (INIS)

Rhode, S. L.; Sahonta, S.-L.; Kappers, M. J.; McAleese, C.; Humphreys, C. J.; Horton, M. K.; Haigh, S. J.; Pennycook, T. J.; Dusane, R. O.; Moram, M. A.

2016-01-01

Threading dislocation core structures in c-plane GaN and In x Ga 1−x N (0.057 ≤ x ≤ 0.20) films were investigated by aberration-corrected scanning transmission electron microscopy. a-type dislocations are unaffected by alloying with indium and have a 5/7-atom ring core structure in both GaN and In x Ga 1−x N. In contrast, the dissociation lengths of (a + c)-type dislocations are reduced, and new 7/4/9-atom ring and 7/4/8/5-atom ring core structures were observed for the dissociated (a + c)-type dislocations in In x Ga 1−x N, which is associated with the segregation of indium near (a + c)-type and c-type dislocation cores in In x Ga 1−x N, consistent with predictions from atomistic Monte Carlo simulations.

Strain field mapping of dislocations in a Ge/Si heterostructure.

Directory of Open Access Journals (Sweden)

Quanlong Liu

Full Text Available Ge/Si heterostructure with fully strain-relaxed Ge film was grown on a Si (001 substrate by using a two-step process by ultra-high vacuum chemical vapor deposition. The dislocations in the Ge/Si heterostructure were experimentally investigated by high-resolution transmission electron microscopy (HRTEM. The dislocations at the Ge/Si interface were identified to be 90° full-edge dislocations, which are the most efficient way for obtaining a fully relaxed Ge film. The only defect found in the Ge epitaxial film was a 60° dislocation. The nanoscale strain field of the dislocations was mapped by geometric phase analysis technique from the HRTEM image. The strain field around the edge component of the 60° dislocation core was compared with those of the Peierls-Nabarro and Foreman dislocation models. Comparison results show that the Foreman model with a = 1.5 can describe appropriately the strain field around the edge component of a 60° dislocation core in a relaxed Ge film on a Si substrate.

Strain field mapping of dislocations in a Ge/Si heterostructure.

Science.gov (United States)

Liu, Quanlong; Zhao, Chunwang; Su, Shaojian; Li, Jijun; Xing, Yongming; Cheng, Buwen

2013-01-01

Ge/Si heterostructure with fully strain-relaxed Ge film was grown on a Si (001) substrate by using a two-step process by ultra-high vacuum chemical vapor deposition. The dislocations in the Ge/Si heterostructure were experimentally investigated by high-resolution transmission electron microscopy (HRTEM). The dislocations at the Ge/Si interface were identified to be 90° full-edge dislocations, which are the most efficient way for obtaining a fully relaxed Ge film. The only defect found in the Ge epitaxial film was a 60° dislocation. The nanoscale strain field of the dislocations was mapped by geometric phase analysis technique from the HRTEM image. The strain field around the edge component of the 60° dislocation core was compared with those of the Peierls-Nabarro and Foreman dislocation models. Comparison results show that the Foreman model with a = 1.5 can describe appropriately the strain field around the edge component of a 60° dislocation core in a relaxed Ge film on a Si substrate.

Dislocation: First Aid

Science.gov (United States)

... or a collision during contact or high-speed sports. Dislocation usually involves the body's larger joints. In adults, the most common site of the injury is the shoulder. In children, it's the elbow. ...

Rare Inferior Shoulder Dislocation (Luxatio Erecta

Directory of Open Access Journals (Sweden)

Hakan Cift

2015-01-01

Full Text Available Although shoulder dislocations have been seen very frequently, inferior dislocation of shoulder constitutes only 0.5% of all shoulder dislocations. We share our 4 patients with luxatio erecta and present their last clinical control. 2 male and 2 female Caucasian patients were diagnosed as luxatio erecta. Patients’ ages were 78, 62, 65, and 76. All patients’ reduction was done by traction-abduction and contour traction maneuver in the operating room. The patients had no symptoms and no limitation of range of motion of their shoulder at their last control. Luxatio erecta is seen rarely, and these patients may have neurovascular injury. These patients should be carefully examined and treated by the orthopaedic and traumatology surgeons.

Rare Inferior Shoulder Dislocation (Luxatio Erecta)

Science.gov (United States)

Cift, Hakan; Soylemez, Salih; Demiroglu, Murat; Ozkan, Korhan; Ozden, Vahit Emre; Ozkut, Afsar T.

2015-01-01

Although shoulder dislocations have been seen very frequently, inferior dislocation of shoulder constitutes only 0.5% of all shoulder dislocations. We share our 4 patients with luxatio erecta and present their last clinical control. 2 male and 2 female Caucasian patients were diagnosed as luxatio erecta. Patients' ages were 78, 62, 65, and 76. All patients' reduction was done by traction-abduction and contour traction maneuver in the operating room. The patients had no symptoms and no limitation of range of motion of their shoulder at their last control. Luxatio erecta is seen rarely, and these patients may have neurovascular injury. These patients should be carefully examined and treated by the orthopaedic and traumatology surgeons. PMID:25883820

Asymptotic analysis of a pile-up of regular edge dislocation walls

KAUST Repository

Hall, Cameron L.

2011-12-01

The idealised problem of a pile-up of regular dislocation walls (that is, of planes each containing an infinite number of parallel, identical and equally spaced dislocations) was presented by Roy et al. [A. Roy, R.H.J. Peerlings, M.G.D. Geers, Y. Kasyanyuk, Materials Science and Engineering A 486 (2008) 653-661] as a prototype for understanding the importance of discrete dislocation interactions in dislocation-based plasticity models. They noted that analytic solutions for the dislocation wall density are available for a pile-up of regular screw dislocation walls, but that numerical methods seem to be necessary for investigating regular edge dislocation walls. In this paper, we use the techniques of discrete-to-continuum asymptotic analysis to obtain a detailed description of a pile-up of regular edge dislocation walls. To leading order, we find that the dislocation wall density is governed by a simple differential equation and that boundary layers are present at both ends of the pile-up. © 2011 Elsevier B.V.

Asymptotic analysis of a pile-up of regular edge dislocation walls

KAUST Repository

Hall, Cameron L.

2011-01-01

The idealised problem of a pile-up of regular dislocation walls (that is, of planes each containing an infinite number of parallel, identical and equally spaced dislocations) was presented by Roy et al. [A. Roy, R.H.J. Peerlings, M.G.D. Geers, Y. Kasyanyuk, Materials Science and Engineering A 486 (2008) 653-661] as a prototype for understanding the importance of discrete dislocation interactions in dislocation-based plasticity models. They noted that analytic solutions for the dislocation wall density are available for a pile-up of regular screw dislocation walls, but that numerical methods seem to be necessary for investigating regular edge dislocation walls. In this paper, we use the techniques of discrete-to-continuum asymptotic analysis to obtain a detailed description of a pile-up of regular edge dislocation walls. To leading order, we find that the dislocation wall density is governed by a simple differential equation and that boundary layers are present at both ends of the pile-up. © 2011 Elsevier B.V.

Positron-trapping mechanism at dislocations in Zn

DEFF Research Database (Denmark)

Hidalgo, Carlos; Linderoth, Søren; Diego, Nieves de

1987-01-01

the average lifetime and the intensity of the long component decrease with increasing temperature. The experimental results are very well described in terms of a generalized trapping model where it is assumed that positrons become trapped in deep traps (jogs) via shallow traps (dislocation lines......). The temperature dependence of the positron-lifetime spectra below 120 K is attributed to the temperature dependence of the trapping rate to the dislocation line. The experimental results have demonstrated that detrapping processes from the dislocation line take place above 120 K. The positron binding energy...

Core structure, dislocation energy and Peierls stress for 1/3112-bar 0 edge dislocations with (0001) and {11-bar 00} slip planes in α-Zr

International Nuclear Information System (INIS)

Voskoboinikov, R.E.; Osetsky, Yu.N.; Bacon, D.J.

2005-01-01

Atomic-scale simulations of edge dislocations of the 1/3112-bar 0(0001) and 1/3112-bar 0{11-bar 00} slip systems have been carried out using a Finnis-Sinclair-type interatomic potential for α-zirconium. The distribution of atomic displacements in the dislocation core shows that in this model the edge dislocation in the basal plane dissociates into two Shockley partials whereas the dislocation in the prism plane remains undissociated. The effective core radius and core energy are estimated, and dislocation response to increasing applied shear strain is investigated. The core properties and the critical stress for dislocation glide (Peierls stress) depend sensitively on whether the core extends or not

Irradiation-induced amorphization in split-dislocation cores

International Nuclear Information System (INIS)

Ovid'ko, I.A.; Rejzis, A.B.

1999-01-01

The model describing special splitting of lattice and grain-boundary dislocations as one of the micromechanisms of solid-phase amorphization in irradiated crystals is proposed. Calculation of energy characteristics of the process of dislocations special splitting is carried out [ru

Dislocation core structures in Si-doped GaN

International Nuclear Information System (INIS)

Rhode, S. L.; Fu, W. Y.; Sahonta, S.-L.; Kappers, M. J.; Humphreys, C. J.; Horton, M. K.; Pennycook, T. J.; Dusane, R. O.; Moram, M. A.

2015-01-01

Aberration-corrected scanning transmission electron microscopy was used to investigate the core structures of threading dislocations in plan-view geometry of GaN films with a range of Si-doping levels and dislocation densities ranging between (5 ± 1) × 10 8  and (10 ± 1) × 10 9  cm −2 . All a-type (edge) dislocation core structures in all samples formed 5/7-atom ring core structures, whereas all (a + c)-type (mixed) dislocations formed either double 5/6-atom, dissociated 7/4/8/4/9-atom, or dissociated 7/4/8/4/8/4/9-atom core structures. This shows that Si-doping does not affect threading dislocation core structures in GaN. However, electron beam damage at 300 keV produces 4-atom ring structures for (a + c)-type cores in Si-doped GaN

Dislocation core structures in Si-doped GaN

Energy Technology Data Exchange (ETDEWEB)

Rhode, S. L., E-mail: srhode@imperial.ac.uk; Fu, W. Y.; Sahonta, S.-L.; Kappers, M. J.; Humphreys, C. J. [Department of Materials Science and Metallurgy, University of Cambridge, Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Horton, M. K. [Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Pennycook, T. J. [SuperSTEM, STFC Daresbury Laboratories, Warrington WA4 4AD (United Kingdom); Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Dusane, R. O. [Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076 (India); Moram, M. A. [Department of Materials Science and Metallurgy, University of Cambridge, Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom)

2015-12-14

Aberration-corrected scanning transmission electron microscopy was used to investigate the core structures of threading dislocations in plan-view geometry of GaN films with a range of Si-doping levels and dislocation densities ranging between (5 ± 1) × 10{sup 8} and (10 ± 1) × 10{sup 9} cm{sup −2}. All a-type (edge) dislocation core structures in all samples formed 5/7-atom ring core structures, whereas all (a + c)-type (mixed) dislocations formed either double 5/6-atom, dissociated 7/4/8/4/9-atom, or dissociated 7/4/8/4/8/4/9-atom core structures. This shows that Si-doping does not affect threading dislocation core structures in GaN. However, electron beam damage at 300 keV produces 4-atom ring structures for (a + c)-type cores in Si-doped GaN.

Dislocation core structures in (0001) InGaN

Energy Technology Data Exchange (ETDEWEB)

Rhode, S. L.; Sahonta, S.-L.; Kappers, M. J.; McAleese, C.; Humphreys, C. J. [Department of Materials Science and Metallurgy, University of Cambridge, Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Horton, M. K. [Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Haigh, S. J. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); SuperSTEM, STFC Daresbury Laboratories, Warrington WA4 4AD (United Kingdom); Pennycook, T. J. [SuperSTEM, STFC Daresbury Laboratories, Warrington WA4 4AD (United Kingdom); Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Dusane, R. O. [Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400076 (India); Moram, M. A. [Department of Materials Science and Metallurgy, University of Cambridge, Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom)

2016-03-14

Threading dislocation core structures in c-plane GaN and In{sub x}Ga{sub 1−x}N (0.057 ≤ x ≤ 0.20) films were investigated by aberration-corrected scanning transmission electron microscopy. a-type dislocations are unaffected by alloying with indium and have a 5/7-atom ring core structure in both GaN and In{sub x}Ga{sub 1−x}N. In contrast, the dissociation lengths of (a + c)-type dislocations are reduced, and new 7/4/9-atom ring and 7/4/8/5-atom ring core structures were observed for the dissociated (a + c)-type dislocations in In{sub x}Ga{sub 1−x}N, which is associated with the segregation of indium near (a + c)-type and c-type dislocation cores in In{sub x}Ga{sub 1−x}N, consistent with predictions from atomistic Monte Carlo simulations.

Self-force on dislocation segments in anisotropic crystals

International Nuclear Information System (INIS)

Fitzgerald, S P; Aubry, S

2010-01-01

A dislocation segment in a crystal experiences a 'self-force', by virtue of the orientation dependence of its elastic energy. If the crystal is elastically isotropic, this force is manifested as a couple acting to rotate the segment toward the lower energy of the pure screw orientation (i.e. acting to align the dislocation line with its Burgers vector). If the crystal is anisotropic, there are additional contributions to the couple, arising from the more complex energy landscape of the lattice itself. These effects can strongly influence the dynamic evolution of dislocation networks, and via their governing role in dislocation multiplication phenomena, control plastic flow in metals. In this paper we develop a model for dislocation self-forces in a general anisotropic crystal, and briefly consider the technologically important example of α-iron, which becomes increasingly anisotropic as the temperature approaches that of the α-γ phase transition at 912 0 C.

Interaction energy of interface dislocation loops in piezoelectric bi-crystals

Directory of Open Access Journals (Sweden)

Jianghong Yuan

2017-03-01

Full Text Available Interface dislocations may dramatically change the electric properties, such as polarization, of the piezoelectric crystals. In this paper, we study the linear interactions of two interface dislocation loops with arbitrary shape in generally anisotropic piezoelectric bi-crystals. A simple formula for calculating the interaction energy of the interface dislocation loops is derived and given by a double line integral along two closed dislocation curves. Particularly, interactions between two straight segments of the interface dislocations are solved analytically, which can be applied to approximate any curved loop so that an analytical solution can be also achieved. Numerical results show the influence of the bi-crystal interface as well as the material orientation on the interaction of interface dislocation loops.

Atomistically determined phase-field modeling of dislocation dissociation, stacking fault formation, dislocation slip, and reactions in fcc systems

Science.gov (United States)

Rezaei Mianroodi, Jaber; Svendsen, Bob

2015-04-01

The purpose of the current work is the development of a phase field model for dislocation dissociation, slip and stacking fault formation in single crystals amenable to determination via atomistic or ab initio methods in the spirit of computational material design. The current approach is based in particular on periodic microelasticity (Wang and Jin, 2001; Bulatov and Cai, 2006; Wang and Li, 2010) to model the strongly non-local elastic interaction of dislocation lines via their (residual) strain fields. These strain fields depend in turn on phase fields which are used to parameterize the energy stored in dislocation lines and stacking faults. This energy storage is modeled here with the help of the "interface" energy concept and model of Cahn and Hilliard (1958) (see also Allen and Cahn, 1979; Wang and Li, 2010). In particular, the "homogeneous" part of this energy is related to the "rigid" (i.e., purely translational) part of the displacement of atoms across the slip plane, while the "gradient" part accounts for energy storage in those regions near the slip plane where atomic displacements deviate from being rigid, e.g., in the dislocation core. Via the attendant global energy scaling, the interface energy model facilitates an atomistic determination of the entire phase field energy as an optimal approximation of the (exact) atomistic energy; no adjustable parameters remain. For simplicity, an interatomic potential and molecular statics are employed for this purpose here; alternatively, ab initio (i.e., DFT-based) methods can be used. To illustrate the current approach, it is applied to determine the phase field free energy for fcc aluminum and copper. The identified models are then applied to modeling of dislocation dissociation, stacking fault formation, glide and dislocation reactions in these materials. As well, the tensile loading of a dislocation loop is considered. In the process, the current thermodynamic picture is compared with the classical mechanical

Fabrication of mesoscopic floating Si wires by introducing dislocations

International Nuclear Information System (INIS)

Motohashi, Mitsuya; Shimizu, Kazuya; Niwa, Masaaki; Suzuki, Toshiaki

2014-01-01

We fabricated a mesoscopic Si wire by introducing dislocations in a silicon wafer before HF anodization. The dislocations formed along the (111) crystal plane. The outline of the dislocation line was an inverted triangle. The resulting wire floated on a bridge girder and had a hybrid structure consisting of a porous layer and crystalline Si. The cross section of the wire had an inverted triangle shape. The wire formation mechanism is discussed in terms of carrier transport, crystal structure, and dislocation formation during anodization. (paper)

Fabrication of mesoscopic floating Si wires by introducing dislocations

Science.gov (United States)

Motohashi, Mitsuya; Shimizu, Kazuya; Suzuki, Toshiaki; Niwa, Masaaki

2014-12-01

We fabricated a mesoscopic Si wire by introducing dislocations in a silicon wafer before HF anodization. The dislocations formed along the (111) crystal plane. The outline of the dislocation line was an inverted triangle. The resulting wire floated on a bridge girder and had a hybrid structure consisting of a porous layer and crystalline Si. The cross section of the wire had an inverted triangle shape. The wire formation mechanism is discussed in terms of carrier transport, crystal structure, and dislocation formation during anodization.

Scattering of phonons by dislocations

International Nuclear Information System (INIS)

Anderson, A.C.

1979-01-01

By 1950, an explicit effort had been launched to use lattice thermal conductivity measurements in the investigation of defect structures in solids. This technique has been highly successful, especially when combined with the measurements of other properties such as optical absorption. One exception has been the study of dislocations. Although dislocations have a profound effect on the phonon thermal conductivity, the mechanisms of the phonon-dislocation interaction are poorly understood. The most basic questions are still debated in the literature. It therefore is pointless to attempt a quantitative comparison between an extensive accumulation of experimental data on the one hand, and the numerous theoretical models on the other. Instead, this chapter will attempt to glean a few qualitative conclusions from the existing experimental data. These results will then be compared with two general models which incorporate, in a qualitative manner, most of the proposed theories of the phonon-dislocation interaction. Until very recently, measurement of thermal conductivity was the only means available to probe the interaction between phonons and defects at phonon frequencies above the standard ultrasonic range of approx. = 10 9 Hz. The introductory paragraphs provide a brief review of the thermal-conductivity technique and the problems which are encountered in practice. There is also a brief presentation of the theoretical models and the complications that may occur in more realistic situations

Interaction of helium atoms with edge dislocations in α-Fe

International Nuclear Information System (INIS)

Heinisch, H.L.; Gao, F.; Kurtz, R.J.; Le, E.A.

2006-01-01

Formation energies, binding energies, and migration energies of interstitial He atoms in and near the core of an a/2 {1 1 0} edge dislocation in α-Fe are determined in atomistic simulations using conjugate gradient relaxation and the Dimer method for determining saddle point energies. Results are compared as a function of the proximity of the He to the dislocation core and the excess interstitial volume in regions around the dislocation. Interstitial He atoms have negative binding energy on the compression side of the dislocation and strong positive binding energy on the tension side. Even at low temperatures, interstitial He atoms in the vicinity of the dislocation easily migrate to the dislocation core, where they form crowdion interstitials oriented along the close-packed slip direction, with binding energies in excess of 2 eV. Crowdion interstitial He atoms diffuse along the dislocation core, transverse to the crowdion direction, with a migration energy of 0.4-0.5 eV

Edge dislocations in dicalcium silicates: Experimental observations and atomistic analysis

International Nuclear Information System (INIS)

Shahsavari, Rouzbeh; Chen, Lu; Tao, Lei

2016-01-01

Understanding defects and influence of dislocations on dicalcium silicates (Ca 2 SiO 4 ) is a challenge in cement science. We report a high-resolution transmission electron microscopy image of edge dislocations in Ca 2 SiO 4 , followed by developing a deep atomic understanding of the edge dislocation-mediated properties of five Ca 2 SiO 4 polymorphs. By decoding the interplay between core dislocation energies, core structures, and nucleation rate of reactivity, we find that γ-C2S and α-C2S polymorphs are the most favorable polymorphs for dislocations in Ca 2 SiO 4 , mainly due to their large pore channels which take away majority of the distortions imposed by edge dislocations. Furthermore, in the context of edge dislocation, while α-C2S represents the most active polymorph for reactivity and crystal growth, β-C2S represents the most brittle polymorph suitable for grinding. This work is the first report on the atomistic-scale analysis of edge dislocation-mediated properties of Ca 2 SiO 4 and may open up new opportunities for tuning fracture and reactivity processes of Ca 2 SiO 4 and other cement components.

Dislocation of primary total hip arthroplasty and the risk of redislocation.

LENUS (Irish Health Repository)

Brennan, Stephen A

2012-09-01

6554 primary total hip arthroplasties were reviewed. Risk factors for dislocation were analysed to assess which were important in terms of predicting recurrent instability. The patients risk of having a second dislocation was independently associated with the surgical approach adopted (p = 0.03) and the time to first dislocation from the primary hip replacement (p = 0.002). Early dislocators whose surgery was performed through an anterolateral approach had less recurrence than late dislocators through a posterior or transtrochanteric approach. None of the other risk factors including head size (p = 0.59), modularity (p = 0.54), mechanism of dislocation (p = 0.23), leg length discrepancy (p = 0.69) and acetabular inclination (p = 0.31) were influential. The use of an abduction brace was not useful in preventing a further dislocation with 69.2% of those braced re-dislocating compared to 68.5% who were not braced (p = 0.96).

Testicular dysgenesis syndrome comprises some but not all cases of hypospadias and impaired spermatogenesis

DEFF Research Database (Denmark)

Jørgensen, N; Rajpert-De Meyts, Ewa; Main, K M

2010-01-01

In 2001, when the testicular dysgenesis syndrome (TDS) concept was proposed, it suggested that impaired development of foetal testes could lead to increased risks of cryptorchidism, hypospadias, decreased spermatogenesis or testis cancer. The TDS concept links the pathogenesis of the four disorders...... with cryptorchidism or TGCC. By contrast, recent studies demonstrated that among men with isolated hypospadias, only a fraction of cases are linked to TDS. There is no doubt that TDS contributes to impaired semen quality. This is most obvious for cases with visible dysgenetic features in testis histology......, but in the majority of men with impaired semen quality as the only symptom, an association with TDS is less clear. Such cases have a very heterogeneous aetiology and may be caused by a host of other - often post-natal-factors. In conclusion, the TDS as a holistic concept has inspired new research activities and led...

Interstitial impurity interactions and dislocation microdynamics in Mo crystals

International Nuclear Information System (INIS)

Kwok, D.N.

1975-05-01

The effects of interstitial impurities on the mechanical properties of molybdenum are explored by comparing results obtained for crystals of various interstitial contents controlled by ultra-high vacuum outgassing. Results show a modulus reduction for as-grown samples and for outgassed specimens at low applied stresses. As a function of plastic microstrain, the values of modulus defect for both as-grown and outgassed specimens saturate at the same value. Interstitial impurities act as pinning agents to dislocation bowing, but when all the easy dislocation loops have broken away from local interstitial pins, the modulus defect reaches a constant saturation value. Etch pitting techniques were used to correlate microstrain observations with dislocation generation and motion. It has been found that edge dislocation generation and movement are active in the microstrain region while screw dislocations are relatively inactive until the macrostrain region is reached. Dislocation velocities range from 10 -6 to 10 -3 cm/s and the average distance between interstitial impurity pinning points is found to be approximately 8 x 10 -4 cm. (U.S.)

On damping of screw dislocation bending vibrations in dissipative crystal: limiting cases

Science.gov (United States)

Dezhin, V. V.

2018-03-01

The expression for the generalized susceptibility of the dislocation obtained earlier was used. The electronic drag mechanism of dislocations is considered. The study of small dislocation oscillations was limited. The contribution of the attenuation of low-frequency bending screw dislocation vibrations to the overall coefficient of dynamic dislocation drag in the long-wave and short-wave limits is calculated. The damping of short-wave bending screw dislocation vibrations caused by an external action of an arbitrary frequency has been investigated. The contribution of long-wave bending screw dislocation vibrations damping in the total drag coefficient at an arbitrary frequency is found.

Bilateral Posterior Tibial Tendon and Flexor Digitorum Longus Dislocations.

Science.gov (United States)

Padegimas, Eric M; Beck, David M; Pedowitz, David I

2017-04-01

The authors present a case of a previously healthy and athletic 17-year-old female who presented with a 3.5-year history of medial left ankle pain after sustaining an inversion injury while playing basketball. Prior to presentation, she had failed prior immobilization and physical therapy for a presumed ankles sprain. Physical examination revealed a dislocated posterior tibial tendon (PTT) that was temporarily reducible, but would spontaneously dislocate immediately after reduction. She had pain and snapping of the PTT with resisted ankle plantar flexion and resisted inversion as well as 4/5 strength in ankle inversion. The diagnosis of dislocated PTT was confirmed on magnetic resonance imaging (MRI). The patient underwent suture anchor repair of the medial retinaculum of the left ankle. At the time of surgery both the PTT and flexor digitorum longus (FDL) were dislocated. Three months postoperatively, the patient represented with PTT dislocation of the right (nonoperative) ankle confirmed by MRI. After failure of immobilization, physical therapy, and oral anti-inflammatory medications, the patient underwent suture anchor repair of the medial retinaculum of the right ankle. At 6 months postoperatively, the patient has 5/5 strength inversion bilaterally, no subluxation of either PTT, and has returned to all activities without limitation. The authors present this unique case of bilateral PTT dislocation and concurrent PTT/FDL dislocation along with review of the literature for PTT dislocation. The authors highlight the common misdaiganosis of this injury and highlight the successful results of surgical intervention. Level V: Case report.

Energetics of dislocation transformations in hcp metals

International Nuclear Information System (INIS)

Wu, Zhaoxuan; Yin, Binglun; Curtin, W.A.

2016-01-01

Dislocation core structures of hcp metals are highly complex and differ significantly among the hcp family. Some dislocations undergo unconventional transformations that have significant effects on the material plastic flow. Here, the energetics of dislocation dissociations are analyzed in a general anisotropic linear elastic theory framework for transformations in which changes in the partial Burgers vectors are small. Quantitative analyses on various transformations are made using DFT-computed stacking fault energies and partial Burgers vectors. Specifically, possible transformations of the mixed, edge, and screw 〈c+a〉 and screw 〈a〉 dislocations in 6 hcp metals (Mg, Ti, Zr, Re, Zn, Cd) are studied. Climb dissociation of mixed or edge 〈c+a〉 dislocations to the Basal plane is energetically favorable in all 6 metals and thus only limited by thermal activation. The 〈c+a〉 screw dislocation is energetically preferable on Pyramidal I for Ti, Zr, and Re, and on Pyramidal II for Zn and Cd. In Mg, the energy difference between screw 〈c+a〉 on Pyramidal I and II planes is small, suggesting relatively easy cross-slip. For the screw 〈a〉, Basal dissociation is energetically favorable in Mg, Re, Zn and Cd, while Prism dissociation is strongly favorable in Ti and Zr. Only Ti, Zr and Re show a metastable state for dissociation on the Prism plane, and the energy difference between screw 〈a〉 on the Prism and Pyramidal I planes is relatively small in all systems, suggesting relatively easy cross-slip of 〈a〉 in Ti and Zr. The elastic analysis thus provides a single framework able to capture the controlling energetics for different dissociations and slip systems in hcp metals. When the calculated energy differences are very small, the results point to the need for detailed modeling of the atomistic core structure. Moreover, the analyses rationalize broad experimental observations on dominant slip systems and dislocation behaviours, and provide

A parallel algorithm for 3D dislocation dynamics

International Nuclear Information System (INIS)

Wang Zhiqiang; Ghoniem, Nasr; Swaminarayan, Sriram; LeSar, Richard

2006-01-01

Dislocation dynamics (DD), a discrete dynamic simulation method in which dislocations are the fundamental entities, is a powerful tool for investigation of plasticity, deformation and fracture of materials at the micron length scale. However, severe computational difficulties arising from complex, long-range interactions between these curvilinear line defects limit the application of DD in the study of large-scale plastic deformation. We present here the development of a parallel algorithm for accelerated computer simulations of DD. By representing dislocations as a 3D set of dislocation particles, we show here that the problem of an interacting ensemble of dislocations can be converted to a problem of a particle ensemble, interacting with a long-range force field. A grid using binary space partitioning is constructed to keep track of node connectivity across domains. We demonstrate the computational efficiency of the parallel micro-plasticity code and discuss how O(N) methods map naturally onto the parallel data structure. Finally, we present results from applications of the parallel code to deformation in single crystal fcc metals

Management of primary anterior shoulder dislocations using immobilization.

Science.gov (United States)

Smith, Brent I; Bliven, Kellie C Huxel; Morway, Genoveffa R; Hurbanek, Jason G

2015-05-01

Reference/Citation : Paterson WH, Throckmorton TW, Koester M, Azar FM, Kuhn JE. Position and duration of immobilization after primary anterior shoulder dislocation: a systemic review and meta-analysis of the literature. J Bone Joint Surg Am. 2010;92(18):2924-2933. Does an optimum duration and position of immobilization after primary anterior shoulder dislocation exist for reducing recurrence rates? MEDLINE/PubMed, EMBASE, and Cochrane databases were searched up to December 2009 without limitations. The search terms for all databases used were shoulder AND dislocation and shoulder AND immobilization. Criteria used to include articles were (1) English language, (2) prospective level I or level II studies (according to Journal of Bone & Joint Surgery guidelines), (3) nonoperative management of initial anterior shoulder dislocation, (4) minimum follow-up of 1 year, and (5) rate of recurrent dislocation as a reported outcome. A standardized evaluation method was used to extract data to allow assessment of methods issues and statistical analysis to determine sources of bias. The primary outcome was the recurrence rate after nonoperative management of anterior shoulder dislocation. Additional data extracted and used in subanalyses included duration and position of immobilization and age at the time of initial dislocation. Data were analyzed to determine associations among groups using 2-tailed Fisher exact tests. For pooled categorical data, relative risk of recurrent dislocation, 95% confidence intervals, and heterogeneity using the I(2) statistic and χ(2) tests were calculated for individual studies. The Mantel-Haenszel method was used to combine studies and estimate overall relative risk of recurrent dislocation and 95% confidence intervals. The statistical difference between duration of immobilization and position was determined using z tests for overall effect. Pooled results were presented as forest plots. In the initial search of the databases, the authors

What is new in cryptorchidism and hypospadias--a critical review on the testicular dysgenesis hypothesis

DEFF Research Database (Denmark)

Thorup, Jørgen Mogens; McLachlan, Robert; Cortes, Dina

2010-01-01

the past 40 years, hypospadias rates have not changed with certainty over the same period. Also, recent studies demonstrate that sperm output may have declined in certain areas of Europe but is probably not declining across the globe as indicated by American studies. However, at the same time......It has been hypothesized that poor semen quality, testis cancer, undescended testis, and hypospadias are symptoms of one underlying entity--the testicular dysgenesis syndrome--leading to increasing male fertility impairment. Though testicular cancer has increased in many Western countries during......, there is increasing recognition of male infertility related to obesity and smoking. There is no certain evidence that the rates of undescended testes have been increasing with time during the last 50 years. In more than 95% of the cases, hypospadias is not associated with cryptorchidism, suggesting major differences...

Effect of dislocations on superconductivity. O vliyanii dislokatsiy na sverkhrpovodimost'

Energy Technology Data Exchange (ETDEWEB)

Agap' ev, B D; Bytsenko, A A; Sukhanov, S A

1976-01-01

Electron-dislocation interaction is analyzed here. The effect of dislocations on the superconductor characteristics is determined according to the Ginzburg-Landau method. Appreciable changes in the stability of the superconductive state are found to occur in the vicinity of dislocations.

A three dimensional discrete dislocation dynamics modelling of the early cycles of fatigue in an austenitic stainless steel 316L: dislocation microstructure and damage analysis

International Nuclear Information System (INIS)

Depres, Ch.

2005-01-01

A numerical code modelling the collective behaviour of dislocations at a mesoscopic scale (Discrete Dislocation Dynamics code) is used to analyse the cyclic plasticity that occurs in surface grains of an AISI 316L stainless steel, in order to understand the plastic mechanism involved in crack initiation in fatigue. Firstly, the analyses of both the formation and the evolution of the dislocation microstructures show the crucial role of cross-slip played in the strain localization in the form of slip bands. As the cycling proceeds, the slip bands exhibit well-organized dislocation arrangements that substitute to dislocation tangles, involving specific interaction mechanisms between primary and deviate systems. Secondly, both the surface displacements generated by plastic slip and the distortion energy induced by the dislocation microstructure have been analysed. We find that an irreversible surface relief in the form of extrusion/intrusion can be induced by cyclic slip of dislocations. The number of cycles for the crack initiation follows a Manson-Coffin type law. The analyses of the concentration of the distortion energy and its repartition in the slip bands show that beneficial energetic zones may be present at the very beginning of the cycling, and that mode-II crack propagation in the surface grains results from a succession of micro-crack initiations along primary slip plane, which is facilitated by various effects (stress concentration due to surface relief, environment effects...). Finally, a dislocation-based model for cyclic plasticity is proposed from Discrete Dislocation Dynamics results. (author)

Dislocation dynamics modelling of radiation damage in thin films

International Nuclear Information System (INIS)

Ferroni, Francesco; Tarleton, Edmund; Fitzgerald, Steven

2014-01-01

Transmission electron microscopy is a key tool for the extraction of information on radiation damage, the understanding of which is critical for materials development for nuclear fusion and fission reactors. Dislocations in TEM samples are subject to strong image forces, owing to the nanometric sample thicknesses, which may introduce artifacts in the damage analysis. Using dislocation dynamics, we elucidate the roles played by dislocation–surface interactions, dislocation–dislocation interactions and self-interactions due to climb for loop types observed in TEM. Comparisons with analytic solutions for a dislocation loop and an edge dislocation in a half-space are included, and the relationship between glide force and loop tilt examined. The parameters for convergence of the zero-traction boundary conditions are obtained, after which the evolution of dislocation structures in a thin film is studied. It is found that three main length scales govern the physical processes: the image force is governed by the distance of the loop from the surface and scales with the film thickness; the glide force is governed by the image stress as well as the loop–loop interaction stress which is in turn governed by the loop spacing L∼1/√ρ, where ρ is the loop density; finally, the climb force depends on the loop size. The three forces compete and their relative magnitudes define the evolution pathway of the dislocation structure. (paper)

Discuss the cause and treatment of pacemaker lead dislocation and deal with

International Nuclear Information System (INIS)

Chen Yueguang; Zhang Dadong; Lu Jie; Yang Hui; Liu Chunyan; Zhang Wei

2003-01-01

Objective: To follow up the patients with pacemaker, observe the condition of pacemaker lead, to explore the cause of lead dislocation, to find out and prevent its occurrence. Methods: Summarizing the clinical data of 6 patients with pacemaker, 7 pacemaker leads with 8 time dislocation, pacemaker 2 DDDR, 2 DDD, 2 VVI. Results: Four patients were punctured from right subclavian vein, one from left subclavian vein and one from right brachiocephalic vein; four leads were dislocation in atrium and one mildly dislocation; four leads dislocation in ventricle and two mildly dislocation; There were 3 old women with 4 leads and 5 times of dislocation

Dislocations and radiation damage in {alpha}-uranium; Dislocations et effets des radiations dans l'uranium {alpha}

Energy Technology Data Exchange (ETDEWEB)

Leteurtre, J [Commissariat a l' Energie Atomique, 92 - Fontenay-Aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

Dislocations in {alpha}-uranium were studied by electron microscopy. Electropolishing of thin foils was performed at low temperature (-110 deg. C) to prevent oxidation. Burgers vectors of twins dislocations are defined. Interactions between slip and twinning are studied from both experimental and theoretical point of view. Samples irradiated at several burn-up were examined. In order to explain our micrographic results, and also all information gathered in literature about radiation damage in {alpha}-uranium, a coherent model is propound for the fission particles effects. We analyse the influences of parameters: temperature, dislocation density, impurity content. The number of point defects created by one initial fission is determined for pure and annealed metal. The importance of the self-anneal which occurs immediately in each displacement spike, and the anneal due to a new fission on the damage resulting from a previous fission, are estimated. The focussing distance in [100] direction is found to be about 1000 Angstrom, at 4 deg. K. (author) [French] Ce travail est une etude par microscopie electronique des dislocations induites dans l'uranium {alpha}, soit par deformation plastique, soit par irradiation. Une methode de preparation des lames minces a basse temperature (-110 deg. C) a ete mise au point. Les vecteurs de Burgers des diverses dislocations de macles de ce metal ont ete definis. Les interactions glissements- maclages sont etudiees experimentalement et theoriquement. Des echantillons irradies a divers taux de combustion ont ete examines. Pour expliquer nos resultats micrographiques, et aussi l'ensemble des informations recueillies dans la litterature concernant l'endommagement par irradiation de l'uranium-{alpha}, nous proposons un modele coherent de l'effet des fragments de fission dans ce metal. L'influence des parametres: temperature, densite de dislocations, impuretes est analysee. Le nombre de defauts ponctuels crees par une fission dans du metal

Growth and instability of charged dislocation loops under irradiation in ceramic materials

CERN Document Server

Ryazanov, A I; Kinoshita, C; Klaptsov, A V

2002-01-01

We have investigated the physical mechanisms of the growth and stability of charged dislocation loops in ceramic materials with very strong different mass of atoms (stabilized cubic zirconia) under different energies and types of irradiation conditions: 100-1000 keV electrons, 100 keV He sup + and 300 keV O sup + ions. The anomalous formation of extended defect clusters (charged dislocation loops) has been observed by TEM under electron irradiation subsequent to ion irradiation. It is demonstrated that very strong strain field (contrast) near charged dislocation loops is formed. The dislocation loops grow up to a critical size and after then become unstable. The instability of the charged dislocation loop leads to the multiplication of dislocation loops and the formation of dislocation network near the charged dislocation loops. A theoretical model is suggested for the explanation of the growth and stability of the charged dislocation loop, taking the charge state of point defects. The calculated distribution...

Hip dysplasia and congenital hip dislocation

Energy Technology Data Exchange (ETDEWEB)

Lingg, G.; Nebel, G.; von Torklus, D.

1981-11-01

In human genetics and orthopedics quite different answers have been given to the question of hereditary transmission and frequency of hip dysplasia in families of children with congenital hip dislocation. We therefore have made roentgenometric measurements of 110 parents of children with congenital hip dislocation. In 25% we found abnormal flat acetabulae, whereas 12% had pathologic deep hips. This may propose a new concept of morphology of congenital hip dysplasia.

Plain film diagnostic of the acromio-clavicular dislocation

International Nuclear Information System (INIS)

Vogel, H.; Thomae, J.; Jungbluth, K.H.; Hamburg Univ.

1980-01-01

The distance between the clavicula and the acromion, between the clavicula and the processus coracoideus and the step height between the acromion and the clavicula arch were measured on roentgen films. Evaluated were plain films of the shoulder and of the chest. 64 patients with dislocation of the acromio-clavicular joint were compared to patients without shoulder lesion. The comparance of both groups showed that measures exceeding the upper limits of the group without lesions are highly suggestive for acromio-clavicular dislocation. If one defines an acromio-clavicular dislocation as proved when two of the measured three distances exceed the upper limit, then an acromio-clavicular dislocation could be seen in 36% of the analysed cases on plain films of the shoulder and in 56% on plain chest films. (orig.) [de

Dislocations in AlGaN: Core Structure, Atom Segregation, and Optical Properties.

Science.gov (United States)

Massabuau, Fabien C-P; Rhode, Sneha L; Horton, Matthew K; O'Hanlon, Thomas J; Kovács, András; Zielinski, Marcin S; Kappers, Menno J; Dunin-Borkowski, Rafal E; Humphreys, Colin J; Oliver, Rachel A

2017-08-09

We conducted a comprehensive investigation of dislocations in Al 0.46 Ga 0.54 N. Using aberration-corrected scanning transmission electron microscopy and energy dispersive X-ray spectroscopy, the atomic structure and atom distribution at the dislocation core have been examined. We report that the core configuration of dislocations in AlGaN is consistent with that of other materials in the III-Nitride system. However, we observed that the dissociation of mixed-type dislocations is impeded by alloying GaN with AlN, which is confirmed by our experimental observation of Ga and Al atom segregation in the tensile and compressive parts of the dislocations, respectively. Investigation of the optical properties of the dislocations shows that the atom segregation at dislocations has no significant effect on the intensity recorded by cathodoluminescence in the vicinity of the dislocations. These results are in contrast with the case of dislocations in In 0.09 Ga 0.91 N where segregation of In and Ga atoms also occurs but results in carrier localization limiting non-radiative recombination at the dislocation. This study therefore sheds light on why InGaN-based devices are generally more resilient to dislocations than their AlGaN-based counterparts.

Conditional deletion of AP-2β in mouse cranial neural crest results in anterior segment dysgenesis and early-onset glaucoma

Directory of Open Access Journals (Sweden)

Vanessa B. Martino

2016-08-01

Full Text Available Anterior segment dysgenesis (ASD encompasses a group of developmental disorders in which a closed angle phenotype in the anterior chamber of the eye can occur and 50% of patients develop glaucoma. Many ASDs are thought to involve an inappropriate patterning and migration of the periocular mesenchyme (POM, which is derived from cranial neural crest cells (NCCs and mesoderm. Although, the mechanism of this disruption is not well understood, a number of transcriptional regulatory molecules have previously been implicated in ASDs. Here, we investigate the function of the transcription factor AP-2β, encoded by Tfap2b, which is expressed in NCCs and their derivatives. Wnt1-Cre-mediated conditional deletion of Tfap2b in NCCs resulted in post-natal ocular defects typified by opacity. Histological data revealed that the conditional AP-2β NCC knockout (KO mutants exhibited dysgenesis of multiple structures in the anterior segment of the eye including defects in the corneal endothelium, corneal stroma, ciliary body and disruption in the iridocorneal angle with adherence of the iris to the cornea. We further show that this phenotype leads to a significant increase in intraocular pressure and a subsequent loss of retinal ganglion cells and optic nerve degeneration, features indicative of glaucoma. Overall, our findings demonstrate that AP-2β is required in the POM for normal development of the anterior segment of the eye and that the AP-2β NCC KO mice might serve as a new and exciting model of ASD and glaucoma that is fully penetrant and with early post-natal onset.

Transmission electron microscopy in situ investigation of dislocation mobility in semiconductors

CERN Document Server

Vanderschaeve, G; Insa, P D T; Caillard, D

2000-01-01

TEM in situ straining experiments provide a unique way to investigate in real time the behaviour of individual dislocations under applied stress. The results obtained on a variety of semiconductors are presented: numerous dislocation sources are observed which makes it possible to measure the dislocation velocity as a function of different physical parameters (local shear stress, temperature, dislocation character, length of the moving dislocation, ...). The experimental results are consistent with a dislocation glide governed by the Peierls mechanism, even for II-VI compounds which have a significant degree of ionic character. For compounds, a linear dependence of the dislocation velocity on the length of the moving segment is noticed, whereas for elemental semiconductors a transition between a length-dependent and a length-independent velocity regime is observed. Analysed in the framework of the kink diffusion model (Hirth and Lothe theory), these results allow an estimation of the kink formation and migrat...

Dislocation kinetics and the acoustic-wave approximation for liquids

International Nuclear Information System (INIS)

Stout, R.B.

1983-03-01

A dislocation-dependent model for liquids describes the lattice deformation and the fluidity deformation as additive deformations. The lattice deformation represents distortions of an atom's potential energy structure and is a recoverable deformation response. The fluidity deformation represents discontinuous repositioning of atoms by dislocation kinetics in the lattice structure and is a nonrecoverable deformation response. From this model, one concludes that in liquids the acoustic-wave approximation is a description of a recoverable oscillation deformation that has dissipation because of dislocation kinetics. Other more-complex waves may exist, but such waves would rapidly disappear because of the small thermodynamic potential for dislocation kinetics in liquids

High-voltage electron-microscopical observation of crack-tip dislocations in silicon crystals

International Nuclear Information System (INIS)

Tanaka, Masaki; Higashida, Kenji

2005-01-01

Crack-tip dislocations in silicon single crystals were observed by high-voltage electron microscopy. Cracks were introduced into silicon wafers at room temperature by a Vickers indenter. The indented specimens were annealed at 823 K in order to activate dislocation emission from the crack tip under the residual stress due to the indentation. In the specimen without annealing, no dislocations were observed around the crack. On the other hand, in the specimen after the annealing, the aspect of the early stage of dislocation emission was observed, where dislocations were emitted not as a perfect dislocation but as a partial dislocation in the hinge-type plastic zone. Prominent dislocation arrays that were emitted from a crack tip were also observed, and they were found to be of shielding type, which increases the fracture toughness of those crystals

Computational issues in the simulation of two-dimensional discrete dislocation mechanics

Science.gov (United States)

Segurado, J.; LLorca, J.; Romero, I.

2007-06-01

The effect of the integration time step and the introduction of a cut-off velocity for the dislocation motion was analysed in discrete dislocation dynamics (DD) simulations of a single crystal microbeam. Two loading modes, bending and uniaxial tension, were examined. It was found that a longer integration time step led to a progressive increment of the oscillations in the numerical solution, which would eventually diverge. This problem could be corrected in the simulations carried out in bending by introducing a cut-off velocity for the dislocation motion. This strategy (long integration times and a cut-off velocity for the dislocation motion) did not recover, however, the solution computed with very short time steps in uniaxial tension: the dislocation density was overestimated and the dislocation patterns modified. The different response to the same numerical algorithm was explained in terms of the nature of the dislocations generated in each case: geometrically necessary in bending and statistically stored in tension. The evolution of the dislocation density in the former was controlled by the plastic curvature of the beam and was independent of the details of the simulations. On the contrary, the steady-state dislocation density in tension was determined by the balance between nucleation of dislocations and those which are annihilated or which exit the beam. Changes in the DD imposed by the cut-off velocity altered this equilibrium and the solution. These results point to the need for detailed analyses of the accuracy and stability of the dislocation dynamic simulations to ensure that the results obtained are not fundamentally affected by the numerical strategies used to solve this complex problem.

Evaluation of the mechanism and principles of management of temporomandibular joint dislocation. Systematic review of literature and a proposed new classification of temporomandibular joint dislocation.

Science.gov (United States)

Akinbami, Babatunde O

2011-06-15

Virtually all the articles in literature addressed only a specific type of dislocation. The aim of this review was to project a comprehensive understanding of the pathologic processes and management of all types of dislodgement of the head of the mandibular condyle from its normal position in the glenoid fossa. In addition, a new classification of temporomandibular joint dislocation was also proposed. A thorough computer literature search was done using the Medline, Cochrane library and Embase database. Key words like temporo-mandibular joint dislocation were used for the search. Additional manual search was done by going through published home-based and foreign articles. Case reports/series, and original articles that documented the type of dislocation, number of cases treated in the series and original articles. Treatment done and outcome of treatment were included in the study. A total of 128 articles were reviewed out which 79 were found relevant. Of these, 26 were case reports, 17 were case series and 36 were original articles. 79 cases were acute dislocations, 35 cases were chronic protracted TMJ dislocations and 311 cases were chronic recurrent TMJ dislocations. Etiology was predominantly trauma in 60% of cases and other causes contributed about 40%. Of all the cases reviewed, only 4 were unilateral dislocation. Various treatment modalities are outlined in this report as indicated for each type of dislocation. The more complex and invasive method of treatment may not necessarily offer the best option and outcome of treatment, therefore conservative approaches should be exhausted and utilized appropriately before adopting the more invasive surgical techniques.

Compound transstyloid, transscaphoid, perilunate fracture dislocation

Directory of Open Access Journals (Sweden)

Nadeem Ali

2013-01-01

Full Text Available Compound fracture dislocations of proximal carpal bones are very rare. We report a 26-year-old male, Defense personnel by profession, who sustained a compound Gustilo Anderson type IIIA transstyloid, transscaphoid, perilunate dislocation. The patient underwent primary proximal row carpectomy and stabilization with uni-planar, uni-lateral external fixator, and K-Wires. On follow-up after a year, the patient had almost negligible range of motion around wrist without any significant discomfort.

Dislocations and related defects in niobium oxide structures

Energy Technology Data Exchange (ETDEWEB)

Anderson, J S; Hutchinson, J L; Lincoln, F J [Oxford Univ. (UK). Inorganic Chemistry Lab.

1977-01-07

Lattice images of the niobium oxides, structures based on the linkage of octahedral groups in continuous networks, occasionally contain features recognizable as dislocations. Since lattice imaging enables the microstructure to be resolved in greater detail, at the level of local structural organization, it is possible to determine the configuration, and also to infer the chemical composition, of dislocated areas. By treating the niobium oxide 'block' structures as superstructures of the ReO/sub 3/ (DO/sub 9/) type, the topology of dislocations can be expressed by relations between the insertion (or deletion) of one or more half-planes of cations, or of oxygen atoms only, changes in the number of crystallographic shear plane interfaces between blocks or columns, changes in (idealized) dimensions and any requisite distortion in the third dimension. Mapping the structure around a dislocation, from the lattice image, is directly equivalent to plotting the Burgers' circuit. In this way, the precise nature of a dislocating perturbation and its implications for the local chemical composition of the crystal can be directly identified. The method is exemplified by analysis of dislocations and of related extended defects of several types, associated with twinning phenomena, semicoherent intergrowth between different ReO/sub 3/-type superstructures and arrays building up a low angle boundary. The essential features of the analysis are not restricted to structures of the niobium oxide type, but can be extended to other types of polyhedron networks.

Influence of Elastic Anisotropy on Extended Dislocation Nodes

Energy Technology Data Exchange (ETDEWEB)

Pettersson, B

1971-09-15

The interaction forces between the partial dislocations forming an extended dislocation node are calculated using elasticity theory for anisotropic media.s are carried out for nodes of screw, edge and mixed character in Ag, which has an anisotropy ratio A equal to 3, and in a hypothetic material with A = 1 and the same shear modulus as Ag. The results are compared with three previous theories using isotropic elasticity theory. As expected, in Ag the influence of anisotropy is of the same order as the uncertainty due to the dislocation core energy

Dislocation following total knee arthroplasty: A report of six cases

Directory of Open Access Journals (Sweden)

Villanueva Manuel

2010-01-01

Full Text Available Background: Dislocation following total knee arthroplasty (TKA is the worst form of instability. The incidence is from 0.15 to 0.5%. We report six cases of TKA dislocation and analyze the patterns of dislocation and the factors related to each of them. Materials and Methods: Six patients with dislocation of knee following TKA are reported. The causes for the dislocations were an imbalance of the flexion gap (n=4, an inadequate selection of implants (n=1, malrotation of components (n=1 leading to incompetence of the extensor mechanism, or rupture of the medial collateral ligament (MCC. The patients presented complained of pain, giving way episodes, joint effusion and difficulty in climbing stairs. Five patients suffered posterior dislocation while one anterior dislocation. An urgent closed reduction of dislocation was performed under general anaesthesia in all patients. All patients were operated for residual instability by revision arthroplasty after a period of conservative treatment. Results: One patient had deep infection and knee was arthrodesed. Two patients have a minimal residual lag for active extension, including a patient with a previous patellectomy. Result was considered excellent or good in four cases and fair in one, without residual instability. Five out of six patients in our series had a cruciate retaining (CR TKA designs: four were revised to a posterior stabilized (PS TKA and one to a rotating hinge design because of the presence of a ruptured MCL. Conclusion: Further episodes of dislocation or instability will be prevented by identifying and treating major causes of instability. The increase in the level of constraint and correction of previous technical mistakes is mandatory.

Jaw Dislocation as an Unusual Complication of Upper Endoscopy

Directory of Open Access Journals (Sweden)

Evan S. Dellon

2016-05-01

Full Text Available This case report presents an unusual complication of upper endoscopy, resulting in jaw dislocation. Temporomandibular joint dislocation is commonly reported in association with anesthesia and intubation, but it is not widely recognized as a complication of gastrointestinal endoscopy. This report also reviews the current literature regarding this complication and discusses the potential causes of dislocation, differential diagnoses for jaw pain following endoscopy, and recommendations for prevention.

Modeling of dislocation channel width evolution in irradiated metals

Science.gov (United States)

Doyle, Peter J.; Benensky, Kelsa M.; Zinkle, Steven J.

2018-02-01

Defect-free dislocation channel formation has been reported to promote plastic instability during tensile testing via localized plastic flow, leading to a distinct loss of ductility and strain hardening in many low-temperature irradiated materials. In order to study the underlying mechanisms governing dislocation channel width and formation, the channel formation process is modeled via a simple stochastic dislocation-jog process dependent upon grain size, defect cluster density, and defect size. Dislocations traverse a field of defect clusters and jog stochastically upon defect interaction, forming channels of low defect-density. Based upon prior molecular dynamics (MD) simulations and in-situ experimental transmission electron microscopy (TEM) observations, each dislocation encounter with a dislocation loop or stacking fault tetrahedron (SFT) is assumed to cause complete absorption of the defect cluster, prompting the dislocation to jog up or down by a distance equal to half the defect cluster diameter. Channels are predicted to form rapidly and are comparable to reported TEM measurements for many materials. Predicted channel widths are found to be most strongly dependent on mean defect size and correlated well with a power law dependence on defect diameter and density, and distance from the dislocation source. Due to the dependence of modeled channel width on defect diameter and density, maximum channel width is predicted to slowly increase as accumulated dose increases. The relatively weak predicted dependence of channel formation width with distance, in accordance with a diffusion analogy, implies that after only a few microns from the source, most channels observed via TEM analyses may not appear to vary with distance because of limitations in the field-of-view to a few microns. Further, examinations of the effect of the so-called "source-broadening" mechanism of channel formation showed that its effect is simply to add a minimum thickness to the channel

[Intra-prosthetic dislocation of the Bousquet dual mobility socket].

Science.gov (United States)

Lecuire, F; Benareau, I; Rubini, J; Basso, M

2004-05-01

The Bousquet system is a dual mobility head-polyethylene polyethylene-metal cup socket. The polyethylene insert retaining the femoral head moves in the noncemented metal cup, increasing both mobility and stability. Between 1989 and 1997, seven cases of intra-prosthetic dislocation (six patients) were observed. The femoral head escaped from the polyethylene insert due to wear. On the average, this complication occurred ten Years after implantation. Risk of dislocation was high in six of the seven hips. All patients had a large sized stem screwed into the femoral neck. There was a characteristic radiological aspect with loss of the concentric head metal cup configuration. The head was applied against the upper wall of the metal cup. Surgical replacement was undertaken early in six patients by simply changing the insert without modifying the other stable components. Outcome remained good at three to eight Years. One patient underwent late surgery. The insert and the cup were replaced with a classical implant. Functional outcome was good but recurrent dislocation occurred. At mid-term, intra-prosthetic dislocation of dual mobility sockets appears to be exceptional. Dislocation results from polyethylene wear leading to failure of the insert to retain the prosthetic head. Wear is favored by direct phenomena (direct contact between neck and insert which can occur early if there is a small difference in the head and neck diameters) or indirect phenomena (factors limiting polyethylene metal-cup mobility). Surgical treatment is necessary. If undertaken early, replacement with a modular head and insert can be sufficient if the prosthesis has not loosened but the metal cup may have to be replaced in the event of metal-metal contact between the head and the cup. Prosthesis loosening, wear of the metal cup, or an identified cause of dislocation imply replacing the failing implants. Implantation of the dual mobility system is particularly interesting for patients with a high risk

Dislocation morphology in deformed and irradiated niobium

International Nuclear Information System (INIS)

Chang, C.P.

1977-06-01

Niobium foils of moderate purity were examined for the morphology of dislocations or defect clusters in the deformed or neutron-irradiated state by transmission electron microscopy. New evidence has been found for the dissociation of screw dislocations into partials on the (211) slip plane according to the Crussard mechanism: (a/2) [111] → (a/3) [111] + (a/6) [111

Bipolar dislocation of the clavicle

Directory of Open Access Journals (Sweden)

Wei Jiang

2012-01-01

Full Text Available Bipolar dislocation of the clavicle at acromioclavicular and sternoclavicular joint is an uncommon traumatic injury. The conservative treatments adopted in the past is associated with redislocation dysfunction and deformity. A 41 years old lady with bipolar dislocation of right shoulder is treated surgically by open reduction and internal fixation by oblique T-plate at sternoclavicular joint and Kirschner wire stabilization at acromioclavicular joint. The patient showed satisfactory recovery with full range of motion of the right shoulder and normal muscular strength. The case reported in view of rarity and at 2 years followup.

Dislocation temporo-mandibulaire bilatérale survenue lors d'une ...

African Journals Online (AJOL)

Risk factors predisposing to these dislocations are known and include conditions such as dimorphism, the unit's syndrome algo-dysfunctional mastication and history of dislocation. These dislocations occur most often after an effort to yawn or in cases of willful forced opening mouth. A female predominance is found in the ...

Electron holography studies of the charge on dislocations in GaN

Energy Technology Data Exchange (ETDEWEB)

Cherns, D.; Jiao, C.G.; Mokhtari, H. [H.H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Cai, J.; Ponce, F.A. [Department of Physics and Astronomy, Arizona State University, Tempe, AZ85287 (United States)

2002-12-01

The measurement of charge on dislocations in GaN by electron holography is described. Recent results are presented showing that edge dislocations in n-doped GaN are highly negatively charged, whereas those in p-doped GaN are positively charged. It is shown that the results are consistent with a model which assumes Fermi level pinning at dislocation states about 2.5 V below the conduction band edge. The application of electron holography to screw dislocations, and the dependence of the observations on the dislocation core structure, are also discussed. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

Evaluation of the mechanism and principles of management of temporomandibular joint dislocation. Systematic review of literature and a proposed new classification of temporomandibular joint dislocation

Directory of Open Access Journals (Sweden)

Akinbami Babatunde O

2011-06-01

Full Text Available Abstract Background Virtually all the articles in literature addressed only a specific type of dislocation. The aim of this review was to project a comprehensive understanding of the pathologic processes and management of all types of dislodgement of the head of the mandibular condyle from its normal position in the glenoid fossa. In addition, a new classification of temporomandibular joint dislocation was also proposed. Method and materials A thorough computer literature search was done using the Medline, Cochrane library and Embase database. Key words like temporo-mandibular joint dislocation were used for the search. Additional manual search was done by going through published home-based and foreign articles. Case reports/series, and original articles that documented the type of dislocation, number of cases treated in the series and original articles. Treatment done and outcome of treatment were included in the study. Result A total of 128 articles were reviewed out which 79 were found relevant. Of these, 26 were case reports, 17 were case series and 36 were original articles. 79 cases were acute dislocations, 35 cases were chronic protracted TMJ dislocations and 311 cases were chronic recurrent TMJ dislocations. Etiology was predominantly trauma in 60% of cases and other causes contributed about 40%. Of all the cases reviewed, only 4 were unilateral dislocation. Various treatment modalities are outlined in this report as indicated for each type of dislocation. Conclusion The more complex and invasive method of treatment may not necessarily offer the best option and outcome of treatment, therefore conservative approaches should be exhausted and utilized appropriately before adopting the more invasive surgical techniques.

Isolated Proximal Tibiofibular Dislocation during Soccer

Directory of Open Access Journals (Sweden)

Casey Chiu

2015-01-01

Full Text Available Proximal tibiofibular dislocations are rarely encountered in the Emergency Department (ED. We present a case involving a man presenting to the ED with left knee pain after making a sharp left turn on the soccer field. His physical exam was only remarkable for tenderness over the lateral fibular head. His X-rays showed subtle abnormalities of the tibiofibular joint. The dislocation was reduced and the patient was discharged from the ED with orthopedic follow-up.

Posterior atlantoaxial dislocation without odontoid fracture

International Nuclear Information System (INIS)

Chaudhary, Reema; Raut, Abhijit; Chaudhary, Kshitij; Metkar, Umesh; Rathod, Ashok; Sanghvi, Darshana

2008-01-01

We report a case of posterior atlantoaxial dislocation without a fracture of the odontoid in a 35-year-old woman. There have been nine reported cases of similar injury in the English literature. The integrity of the transverse ligament following posterior atlantoaxial dislocations has not been well documented in these reports. In the present case, MRI revealed an intact transverse ligament, which probably contributed to the stability of the C1-C2 complex following closed reduction. (orig.)

Dislocation Starvation and Exhaustion Hardening in Mo-alloy Nanofibers

Energy Technology Data Exchange (ETDEWEB)

Chisholm, Claire [University of California, Berkeley & LBNL; Bei, Hongbin [ORNL; Lowry, M. B. [University of California, Berkeley; Oh, Jason [Hysitron, Inc., MN; Asif, S.A. Syed [Hysitron, Inc., MN; Warren, O. [Hysitron, Inc., MN; Shan, Zhiwei [Xi' an Jiaotong University, China & Hysitron, Inc., MN; George, Easo P [ORNL; Minor, Andrew [University of California, Berkeley & LBNL

2012-01-01

The evolution of defects in Mo alloy nanofibers with initial dislocation densities ranging from 0 to 1.6 1014 m2 were studied using an in situ push-to-pull device in conjunction with a nanoindenter in a transmission electron microscope. Digital image correlation was used to determine stress and strain in local areas of deformation. When they had no initial dislocations the Mo alloy nanofibers suffered sudden catastrophic elongation following elastic deformation to ultrahigh stresses. At the other extreme fibers with a high dislocation density underwent sustained homogeneous deformation after yielding at much lower stresses. Between these two extremes nanofibers with intermediate dislocation densities demonstrated a clear exhaustion hardening behavior, where the progressive exhaustion of dislocations and dislocation sources increases the stress required to drive plasticity. This is consistent with the idea that mechanical size effects ( smaller is stronger ) are due to the fact that nanostructures usually have fewer defects that can operate at lower stresses. By monitoring the evolution of stress locally we find that exhaustion hardening causes the stress in the nanofibers to surpass the critical stress predicted for self-multiplication, supporting a plasticity mechanism that has been hypothesized to account for the rapid strain softening observed in nanoscale bcc materials at high stresses.

Dislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels

Science.gov (United States)

Liu, Jiabin; Jin, Yongbin; Fang, Xiaoyang; Chen, Chenxu; Feng, Qiong; Liu, Xiaowei; Chen, Yuzeng; Suo, Tao; Zhao, Feng; Huang, Tianlin; Wang, Hongtao; Wang, Xi; Fang, Youtong; Wei, Yujie; Meng, Liang; Lu, Jian; Yang, Wei

2016-10-01

Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectively enhance the yielding strength of the metastable austenitic steel from 322 ± 18 MPa to 675 ± 15 MPa, while retaining both the formability and hardenability. It is noted that no boundaries are introduced in the optimized TMT process and all strengthening effect originates from dislocations with inherited thermal stability. The success of this method relies on the decoupled strengthening and toughening mechanisms in metastable austenitic steels, in which yield strength is controlled by initial dislocation density while ductility is retained by the capability to nucleate new dislocations to carry plastic deformation. Especially, the simplicity in processing enables scaling and industrial applications to meet the challenging requirements of emissions reduction. On the other hand, the complexity in the underlying mechanism of dislocation strengthening in this case may shed light on a different route of material strengthening by stimulating dislocation activities, rather than impeding motion of dislocations.

Modeling of dislocation generation and interaction during high-speed deformation of metals

DEFF Research Database (Denmark)

Schiøtz, J.; Leffers, T.; Singh, B.N.

2002-01-01

Recent experiments by Kiritani et al. [1] have revealed a surprisingly high rate of vacancy production during highspeed deformation of thin foils of fcc metals. Virtually no dislocations are seen after the deformation. This is interpreted as evidence for a dislocation-free deformation mechanism...... at very high strain rates. We have used molecular-dynamics simulations to investigate high-speed deformation of copper crystals. Even though no pre-existing dislocation sources are present in the initial system, dislocations are quickly nucleated and a very high dislocation density is reached during...... the deformation. Due to the high density of dislocations, many inelastic interactions occur between dislocations, resulting in the generation of vacancies. After the deformation, a very high density of vacancies is observed, in agreement with the experimental observations. The processes responsible...

Dislocated Worker Project.

Science.gov (United States)

1988

Due to the severe economic decline in the automobile manufacturing industry in southeastern Michigan, a Dislocated Workers Program has been developed through the partnership of the Flint Area Chamber of Commerce, three community colleges, the National Center for Research in Vocational Education, the Michigan State Department of Education, the…

Dislocations and radiation damage in {alpha}-uranium; Dislocations et effets des radiations dans l'uranium {alpha}

Energy Technology Data Exchange (ETDEWEB)

Leteurtre, J. [Commissariat a l' Energie Atomique, 92 - Fontenay-Aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

Dislocations in {alpha}-uranium were studied by electron microscopy. Electropolishing of thin foils was performed at low temperature (-110 deg. C) to prevent oxidation. Burgers vectors of twins dislocations are defined. Interactions between slip and twinning are studied from both experimental and theoretical point of view. Samples irradiated at several burn-up were examined. In order to explain our micrographic results, and also all information gathered in literature about radiation damage in {alpha}-uranium, a coherent model is propound for the fission particles effects. We analyse the influences of parameters: temperature, dislocation density, impurity content. The number of point defects created by one initial fission is determined for pure and annealed metal. The importance of the self-anneal which occurs immediately in each displacement spike, and the anneal due to a new fission on the damage resulting from a previous fission, are estimated. The focussing distance in [100] direction is found to be about 1000 Angstrom, at 4 deg. K. (author) [French] Ce travail est une etude par microscopie electronique des dislocations induites dans l'uranium {alpha}, soit par deformation plastique, soit par irradiation. Une methode de preparation des lames minces a basse temperature (-110 deg. C) a ete mise au point. Les vecteurs de Burgers des diverses dislocations de macles de ce metal ont ete definis. Les interactions glissements- maclages sont etudiees experimentalement et theoriquement. Des echantillons irradies a divers taux de combustion ont ete examines. Pour expliquer nos resultats micrographiques, et aussi l'ensemble des informations recueillies dans la litterature concernant l'endommagement par irradiation de l'uranium-{alpha}, nous proposons un modele coherent de l'effet des fragments de fission dans ce metal. L'influence des parametres: temperature, densite de dislocations, impuretes est analysee. Le nombre de defauts ponctuels crees

Ab initio simulation of dislocation cores in metals

International Nuclear Information System (INIS)

Ventelon, L.

2008-01-01

In the framework of the multi scale simulation of metals and alloys plasticity, the aim of this study is to develop a methodology of ab initio dislocations study and to apply it to the [111] screw dislocation in the bc iron. (A.L.B.)

Polarization singularities of optical fields caused by structural dislocations in crystals

International Nuclear Information System (INIS)

Savaryn, V; Vasylkiv, Yu; Krupych, O; Skab, I; Vlokh, R

2013-01-01

We analyze polarization singularities of optical beams that propagate through crystals possessing structural dislocations. We show that screw dislocations of crystalline structure can lead to the appearance of purely screw-type dislocations of light wavefronts. This can happen only in crystals that belong to trigonal and cubic systems. These polarization singularities will give rise to optical vortices with the topological charge equal to ±1, whenever a crystal sample is placed between crossed circular polarizers. We have also found that edge dislocations present in the cubic and trigonal crystals, with the Burgers vector perpendicular to the three-fold symmetry axes, can impose mixed screw-edge dislocations in the wavefronts of optical beams and generate singly charged optical vortices. The results of our analysis can be applied for detecting and identifying dislocations of different types available in crystals. (paper)

Self-organization of voids, gas bubbles and dislocation patterns under irradiation

International Nuclear Information System (INIS)

Dubinko, V.I.; Turkin, A.A.

1993-01-01

In the present paper three examples of self-organization in solids under irradiation are considered on the basis of original mechanisms, namely, the ordering of voids in void lattices under high temperature irradiation, the alignment of gas bubbles in bubble lattices under low-temperature gas atom implantation, and the formation of superdislocations (one-dimensional pile-ups of dislocation loops) and other dislocation patterns in the regimes of medium and high temperature irradiation. The ordering of cavities (i.e.voids or gas bubbles) is shown to arise due to a dissipative interaction between cavities induced by the interstitial dislocation loop absorption and punching, respectively, which represent anisotropic mechanisms of atomic transport. The dislocation patterning is shown to be driven by the dependence of dislocation bias for absorption of self-interstitial atoms on the dislocation arrangement. (author). 57 refs., 1 tab., 12 figs

Dislocation structure evolution and characterization in the compression deformed Mn-Cu alloy

International Nuclear Information System (INIS)

Zhong, Y.; Yin, F.; Sakaguchi, T.; Nagai, K.; Yang, K.

2007-01-01

Dislocation densities and dislocation structure arrangements in cold compressed polycrystalline commercial M2052 (Mn-20Cu-5Ni-2Fe) high damping alloy with various strains were determined in scanning mode by X-ray peak profile analysis and electron backscatter diffraction (EBSD). The results indicate that the Mn-Cu-Ni-Fe alloy has an evolution behavior quite similar to the dislocation structure in copper. The dislocation arrangement parameter shows a local minimum in the transition range between stages III and IV that can be related to the transformation of the dislocation arrangement in the cell walls from a polarized dipole wall (PDW) into a polarized tile wall (PTW) structure. This evolution is further confirmed by the results of local misorientation determined by EBSD. In addition, during deformation, the multiplication of dislocation densities in the MnCu alloy is significantly slower than that in copper, and the transition of the dislocation structure is strongly retarded in the MnCu alloy compared with copper. These results can be explained by the mechanism of elastic anisotropy on the dislocation dynamics, as the elastic anisotropy in the MnCu alloy is larger than that in copper, which can strongly retard the multiplication of the dislocation population and the transformation of the dislocation structure. These results are important for research into the plastic working behavior of Mn-Cu-Ni-Fe high damping alloy

Multiphysical simulation analysis of the dislocation structure in germanium single crystals

Science.gov (United States)

Podkopaev, O. I.; Artemyev, V. V.; Smirnov, A. D.; Mamedov, V. M.; Sid'ko, A. P.; Kalaev, V. V.; Kravtsova, E. D.; Shimanskii, A. F.

2016-09-01

To grow high-quality germanium crystals is one of the most important problems of growth industry. The dislocation density is an important parameter of the quality of single crystals. The dislocation densities in germanium crystals 100 mm in diameter, which have various shapes of the side surface and are grown by the Czochralski technique, are experimentally measured. The crystal growth is numerically simulated using heat-transfer and hydrodynamics models and the Alexander-Haasen dislocation model in terms of the CGSim software package. A comparison of the experimental and calculated dislocation densities shows that the dislocation model can be applied to study lattice defects in germanium crystals and to improve their quality.

Traumatic Anterior Dislocation of Hip in a Child- Case Report

Directory of Open Access Journals (Sweden)

S Ahmad

2015-03-01

Full Text Available Traumatic hip dislocation in children is relatively rare accounting for about 5% of all hip dislocations. Most of the hip dislocations seen in children are of the posterior type but the much rarer anterior and anterior-inferior (obturator types have also been described. We present the case of an eight years old girl with an obturator type of hip dislocation following trivial trauma. She was treated with closed reduction and immobilisation in skin traction for three weeks. She was followed up closely for one year and did not develop any complications during that period.

Determination of dislocation densities in InN

Energy Technology Data Exchange (ETDEWEB)

Ardali, Sukru; Tiras, Engin [Department of Physics, Faculty of Science, Anadolu University, Yunus Emre Campus, Eskisehir 26470 (Turkey); Gunes, Mustafa; Balkan, Naci [School of Computer Science and Electronic Engineering, University of Essex, Wivenhoe Park, Colchester CO4 3SQ (United Kingdom); Ajagunna, Adebowale Olufunso; Iliopoulos, Eleftherios; Georgakilas, Alexandros [Microelectronics Research Group, IESL, FORTH and Physics Department, University of Crete, P.O. Box 1385, 71110 Heraklion-Crete (Greece)

2012-03-15

The magneto-transport measurements, carried out at magnetic fields up to 11 T and in the temperature range between 1.8 K and 300 K, are used to investigate the scattering mechanisms in GaN/InN/AlN double heterojunctions. Theoretical modeling is based on a variational approach to solving Boltzmann transport equation. It is found that dislocation scattering is the dominant scattering mechanisms at low temperatures because of the large lattice mismatch with the substrate and hence the high density of dislocations in these material systems. Nevertheless, InN epilayers are characterized by a high background carrier density, probably associated with unwanted impurities. Therefore, we also included in our calculations the ionized impurity scattering. However, the effect of ionized impurity scattering as well as the acoustic phonon scattering, remote- background-ionized impurity scattering, and interface roughness scattering on electron mobility are much smaller than that of dislocation scattering. The dislocation densities, in samples with InN thicknesses of 0.4, 0.6 and 0.8 {mu}m, are then determined from the best fit to the experimental data for the low-temperature transport mobility (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Neglected Posterior Dislocation of Hip in Children - A Case Report.

Science.gov (United States)

Pal, Chandra Prakash; Kumar, Deepak; Sadana, Ashwani; Dinkar, Karuna Shankar

2014-01-01

Traumatic dislocation of the hip in children is a rare injury. We report the outcome of 2 patients of neglected hip dislocation which were treated by open reduction and internal fixation by k-wires. We treat 2 children both girls (one was of 4 years and other was 7 years of age). In both cases dislocation was unilateral and was not associated with any facture. Both cases were of posterior dislocation. in both cases open reduction and internal fixation was done by k wires. Hip spica was applied post operatively in both cases. The k wire was removed at 3 to 4 weeks. Patients were allowed to bear weight from gradual to full weight bearing after 6 weeks. We conclude that open reduction is a satisfactory treatment for neglected hip dislocation. It prevents not only deformity but also maintains limb length.

Femoral head fracture without hip dislocation

Directory of Open Access Journals (Sweden)

Aggarwal Aditya K

2013-10-01

Full Text Available 【Abstract】Femoral head fractures without dislocation or subluxation are extremely rare injuries. We report a neglected case of isolated comminuted fracture of femoral head without hip dislocation or subluxation of one year duration in a 36-year-old patient who sustained a high en- ergy trauma due to road traffic accident. He presented with painful right hip and inability to bear full weight on right lower limb with Harris hip score of 39. He received cementless total hip replacement. At latest follow-up of 2.3 years, functional outcome was excellent with Harris hip score of 95. Such isolated injuries have been described only once in the literature and have not been classified till now. The purpose of this report is to highlight the extreme rarity, possible mechanism involved and a novel classification system to classify such injuries. Key words: Femur head; Hip dislocation; Classification; Arthroplasty, replacement, hip

Dislocations and vacancies in two-dimensional mixed crystals of spheres and dimers

KAUST Repository

Gerbode, Sharon J.

2010-10-15

In colloidal crystals of spheres, dislocation motion is unrestricted. On the other hand, recent studies of relaxation in crystals of colloidal dimer particles have demonstrated that the dislocation dynamics in such crystals are reminiscent of glassy systems. The observed glassy dynamics arise as a result of dislocation cages formed by certain dimer orientations. In the current study, we use experiments and simulations to investigate the transition that arises when a pure sphere crystal is doped with an increasing concentration of dimers. Specifically, we focus on both dislocation caging and vacancy motion. Interestingly, we find that any nonzero fraction of dimers introduces finite dislocation cages, suggesting that glassy dynamics are present for any mixed crystal. However, we have also identified a vacancy-mediated uncaging mechanism for releasing dislocations from their cages. This mechanism is dependent on vacancy diffusion, which slows by orders of magnitude as the dimer concentration is increased. We propose that in mixed crystals with low dimer concentrations vacancy diffusion is fast enough to uncage dislocations and delay the onset of glassy dislocation dynamics. © 2010 The American Physical Society.

Dislocations and vacancies in two-dimensional mixed crystals of spheres and dimers

KAUST Repository

Gerbode, Sharon J.; Ong, Desmond C.; Liddell, Chekesha M.; Cohen, Itai

2010-01-01

In colloidal crystals of spheres, dislocation motion is unrestricted. On the other hand, recent studies of relaxation in crystals of colloidal dimer particles have demonstrated that the dislocation dynamics in such crystals are reminiscent of glassy systems. The observed glassy dynamics arise as a result of dislocation cages formed by certain dimer orientations. In the current study, we use experiments and simulations to investigate the transition that arises when a pure sphere crystal is doped with an increasing concentration of dimers. Specifically, we focus on both dislocation caging and vacancy motion. Interestingly, we find that any nonzero fraction of dimers introduces finite dislocation cages, suggesting that glassy dynamics are present for any mixed crystal. However, we have also identified a vacancy-mediated uncaging mechanism for releasing dislocations from their cages. This mechanism is dependent on vacancy diffusion, which slows by orders of magnitude as the dimer concentration is increased. We propose that in mixed crystals with low dimer concentrations vacancy diffusion is fast enough to uncage dislocations and delay the onset of glassy dislocation dynamics. © 2010 The American Physical Society.

Irradiation deformation due to SIPA induced dislocation anisotropy

International Nuclear Information System (INIS)

Woo, CH.

1980-02-01

A contribution to irradiation deformation resulting from the stress-induced preferred adsorption (SIPA) effect is considered. SIPA causes a variation of the growth rates of irradiation-generated dislocation loops, according to the alignment of their Burgers vectors with respect to the applied stress. A prolinged period under an applied stress then creates an anisotropic dislocation structure in which the majority of dislocations have their Burgers vectors in alignment with the stress. In the presence of 'neutral' sinks, the resulting anisotropic dislocation structure causes plastic deformation similar to the way in which irradiation growth occurs in zirconium. This mechanism is called SIPA-induced growth (SIG). We have shown that SIG is very significant in comparison to SIPA, except when little or no loop growth has occurred during the period the stress is applied. This report contains the detailed formulation and derivation of the formulae for the evaluation of the contribution due to SIG. (auth)

Atomistic simulations of cross-slip of jogged screw dislocations in copper

DEFF Research Database (Denmark)

Vegge, T.; Rasmussen, T.; Leffers, T.

2001-01-01

We have performed atomic-scare simulations of cross-slip processes of screw dislocations in copper, simulating jog-free dislocations as well as different types of jogged screw dislocations. Minimum-energy paths and corresponding transition state energies are obtained using the nudged-elastic...

A discrete dislocation dynamics model of creeping single crystals

Science.gov (United States)

Rajaguru, M.; Keralavarma, S. M.

2018-04-01

Failure by creep is a design limiting issue for metallic materials used in several high temperature applications. Current theoretical models of creep are phenomenological with little connection to the underlying microscopic mechanisms. In this paper, a bottom-up simulation framework based on the discrete dislocation dynamics method is presented for dislocation creep aided by the diffusion of vacancies, known to be the rate controlling mechanism at high temperature and stress levels. The time evolution of the creep strain and the dislocation microstructure in a periodic unit cell of a nominally infinite single crystal is simulated using the kinetic Monte Carlo method, together with approximate constitutive laws formulated for the rates of thermal activation of dislocations over local pinning obstacles. The deformation of the crystal due to dislocation glide between individual thermal activation events is simulated using a standard dislocation dynamics algorithm, extended to account for constant stress periodic boundary conditions. Steady state creep conditions are obtained in the simulations with the predicted creep rates as a function of stress and temperature in good agreement with experimentally reported values. Arrhenius scaling of the creep rates as a function of temperature and power-law scaling with the applied stress are also reproduced, with the values of the power-law exponents in the high stress regime in good agreement with experiments.

Dislocation dynamics of web type silicon ribbon

Energy Technology Data Exchange (ETDEWEB)

Dillon, Jr, O W; Tsai, C T; DeAngelis, R J

1987-03-01

Silicon ribbon grown by the dendritic web process passes through a rapidly changing thermal profile in the growth direction. This rapidly changing profile induces stresses which produce changes in the dislocation density in the ribbon. A viscoplastic material response function (Haasen-Sumino model) is used herein to calculate the stresses and the dislocation density at each point in the silicon ribbon. The residual stresses are also calculated.

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

DEFF Research Database (Denmark)

Hong, Chuanshi; Huang, Xiaoxu; Winther, Grethe

2013-01-01

Previous studies have revealed that dislocation structures in metals with medium-to-high stacking fault energy, depend on the grain orientation and therefore on the slip systems. In the present work, the dislocations in eight slip-plane-aligned geometrically necessary boundaries (GNBs) in three...... expected active dominate. The dislocations predicted inactive are primarily attributed to dislocation reactions in the boundary. Two main types of dislocation networks in the boundaries were identified: (1) a hexagonal network of the three dislocations in the slip plane with which the boundary was aligned......; two of these come from the active slip systems, the third is attributed to dislocation reactions (2) a network of three dislocations from both of the active slip planes; two of these react to form Lomer locks. The results indicate a systematic boundary formation process for the GNBs. Redundant...

Study of the dislocation contribution to the internal friction background of gold

Science.gov (United States)

Baur, J.; Benoit, W.

1987-04-01

The dislocation contribution to the internal friction (IF) background is studied in annealed gold samples containing various dilute concentrations of platinum impurities. The measurements are performed in the kHz frequency range in order to determine the loss mechanism responsible for the high IF background observed at these low frequencies. To this end, the IF background was systematically measured as a function of frequency, vibration amplitude, temperature, and impurity concentration. The experimental results show that the high dislocation contribution observed in annealed samples is strain-amplitude independent for amplitudes in the range 10-7 to 2×10-6, but rapidly decreases for amplitudes smaller than 10-7. In particular, the dislocation contribution tends to zero when the strain amplitude tends to zero. Furthermore, this contribution is frequency independent. These observations demonstrate that the dislocation contribution cannot be explained by relaxations. In particular, this contribution cannot be attributed to a viscous damping of the dislocation motion. On the contrary, the experiments show that the IF background due to dislocations must be explained by hysteretic and athermal motions of dislocations interacting with point defects. However, these hysteretic motions are not due to breakaway of dislocations from pinning points distributed along their length. The experimental results can be explained by the presence of point defects close to the dislocations, but not on them. The mechanical energy loss is attributed to hysteretic motions of dislocations between potential minima created by point defects.

Characterizing short-range vs. long-range spatial correlations in dislocation distributions

International Nuclear Information System (INIS)

Chevy, Juliette; Fressengeas, Claude; Lebyodkin, Mikhail; Taupin, Vincent; Bastie, Pierre; Duval, Paul

2010-01-01

Hard X-ray diffraction experiments have provided evidence of a strongly heterogeneous distribution of dislocation densities along the axis of cylindrical ice single crystals oriented for basal slip in torsion creep. The dislocation arrangements showed a complex scale-invariant character, which was analyzed by means of statistical and multifractal techniques. A trend to decreasing autocorrelation of the dislocation distribution was observed as deformation proceeds. At low strain levels, long-range spatial correlations control the distribution, but short-range correlations in relation with cross-slip progressively prevail when strain increases. This trend was reproduced by a model based on field dislocation dynamics, a theory accounting for both long-range elastic interactions and short-range interactions through transport of dislocation densities.

Characterizing short-range vs. long-range spatial correlations in dislocation distributions

Energy Technology Data Exchange (ETDEWEB)

Chevy, Juliette, E-mail: juliette.chevy@gmail.com [Laboratoire de Glaciologie et Geophysique de l' Environnement-CNRS, 54 rue Moliere, 38402 St. Martin d' Heres (France)] [Laboratoire Science et Ingenierie des Materiaux et Procedes, Grenoble INP-CNRS-UJF, BP 75, 38402 St. Martin d' Heres Cedex (France); Fressengeas, Claude; Lebyodkin, Mikhail; Taupin, Vincent [Laboratoire de Physique et Mecanique des Materiaux, Universite Paul Verlaine-Metz/CNRS, Ile du Saulcy, 57045 Metz Cedex (France); Bastie, Pierre [Laboratoire de Spectrometrie Physique, BP 87, 38402 St. Martin d' Heres Cedex (France)] [Institut Laue Langevin, BP 156, 38042 Grenoble Cedex 9 (France); Duval, Paul [Laboratoire de Glaciologie et Geophysique de l' Environnement-CNRS, 54 rue Moliere, 38402 St. Martin d' Heres (France)

2010-03-15

Hard X-ray diffraction experiments have provided evidence of a strongly heterogeneous distribution of dislocation densities along the axis of cylindrical ice single crystals oriented for basal slip in torsion creep. The dislocation arrangements showed a complex scale-invariant character, which was analyzed by means of statistical and multifractal techniques. A trend to decreasing autocorrelation of the dislocation distribution was observed as deformation proceeds. At low strain levels, long-range spatial correlations control the distribution, but short-range correlations in relation with cross-slip progressively prevail when strain increases. This trend was reproduced by a model based on field dislocation dynamics, a theory accounting for both long-range elastic interactions and short-range interactions through transport of dislocation densities.

Surface stress mediated image force and torque on an edge dislocation

Science.gov (United States)

Raghavendra, R. M.; Divya, Iyer, Ganesh; Kumar, Arun; Subramaniam, Anandh

2018-07-01

The proximity of interfaces gives prominence to image forces experienced by dislocations. The presence of surface stress alters the traction-free boundary conditions existing on free-surfaces and hence is expected to alter the magnitude of the image force. In the current work, using a combined simulation of surface stress and an edge dislocation in a semi-infinite body, we evaluate the configurational effects on the system. We demonstrate that if the extra half-plane of the edge dislocation is parallel to the surface, the image force (glide) is not altered due to surface stress; however, the dislocation experiences a torque. The surface stress breaks the 'climb image force' symmetry, thus leading to non-equivalence between positive and negative climb. We discover an equilibrium position for the edge dislocation in the positive 'climb geometry', arising due to a competition between the interaction of the dislocation stress fields with the surface stress and the image dislocation. Torque in the climb configuration is not affected by surface stress (remains zero). Surface stress is computed using a recently developed two-scale model based on Shuttleworth's idea and image forces using a finite element model developed earlier. The effect of surface stress on the image force and torque experienced by the dislocation monopole is analysed using illustrative 3D models.

Displacement field for an edge dislocation in a layered half-space

Science.gov (United States)

Savage, J.C.

1998-01-01

The displacement field for an edge dislocation in an Earth model consisting of a layer welded to a half-space of different material is found in the form of a Fourier integral following the method given by Weeks et al. [1968]. There are four elementary solutions to be considered: the dislocation is either in the half-space or the layer and the Burgers vector is either parallel or perpendicular to the layer. A general two-dimensional solution for a dip-slip faulting or dike injection (arbitrary dip) can be constructed from a superposition of these elementary solutions. Surface deformations have been calculated for an edge dislocation located at the interface with Burgers vector inclined 0??, 30??, 60??, and 90?? to the interface for the case where the rigidity of the layer is half of that of the half-space and the Poisson ratios are the same. Those displacement fields have been compared to the displacement fields generated by similarly situated edge dislocations in a uniform half-space. The surface displacement field produced by the edge dislocation in the layered half-space is very similar to that produced by an edge dislocation at a different depth in a uniform half-space. In general, a low-modulus (high-modulus) layer causes the half-space equivalent dislocation to appear shallower (deeper) than the actual dislocation in the layered half-space.

Dislocation Processes and Frictional Stability of Faults

Science.gov (United States)

Toy, V. G.; Mitchell, T. M.; Druiventak, A.

2011-12-01

The rate dependence of frictional processes in faults in quartzofeldspathic crust is proposed to change at c. 300°C, because above this temperature asperity deformation can be accommodated by crystal plastic processes. As a consequence, the real fault contact area increases and the fault velocity strengthens. Conversely, faults at lower temperatures are velocity weakening and therefore prone to earthquake slip. We have investigated whether dislocation processes are important around faults in quartzites on seismic timescales, by inducing fault slip on a saw cut surface in novaculite blocks. Deformation was carried out at 450°C and 600°C in a Griggs apparatus. Slip rates of 8.3 x 10-7s-1 allowed total slip, u, of 0.5mm to be achieved in c. 10 minutes. Failure occurred at peak differential stresses of ~1.7 GPa and 1.4 GPa respectively, followed by significant weakening. Structures of the novaculite within and surrounding the fault surface were examined using EBSD, FIB-SEM and TEM to elucidate changes to their dislocation substructure. In the sample deformed at 450°C, a ~50μm thick layer of amorphous / non-crystalline silica was developed on the saw-cut surface during deformation. Rare clasts of the wall rock are preserved within this material. The surrounding sample is mostly composed of equant quartz grains of 5-10μm diameter that lack a preferred orientation, contain very few intercrystalline dislocations, and are divided by organised high angle grain boundaries. After deformation, most quartz grains within the sample retain their starting microstructure. However, within ~10μm of the sliding surface, dislocations are more common, and these are arranged into elongated, tangled zones (subgrain boundaries?). Microfractures are also observed. These microstructures are characteristic of deformation accommodated by low temperature plasticity. Our preliminary observations suggest that dislocation processes may be able to accommodate some deformation around fault

Void growth suppression by dislocation impurity atmospheres

International Nuclear Information System (INIS)

Weertman, J.; Green, W.V.

1976-01-01

A detailed calculation is given of the effect of an impurity atmosphere on void growth under irradiation damage conditions. Norris has proposed that such an atmosphere can suppress void growth. The hydrostatic stress field of a dislocation that is surrounded by an impurity atmosphere was found and used to calculate the change in the effective radius of a dislocation line as a sink for interstitials and vacancies. The calculation of the impurity concentration in a Cottrell cloud takes into account the change in hydrostatic pressure produced by the presence of the cloud itself. It is found that void growth is eliminated whenever dislocations are surrounded by a condensed atmosphere of either oversized substitutional impurity atoms or interstitial impurity atoms. A condensed atmosphere will form whenever the average impurity concentration is larger than a critical concentration

Infantile and congenital hip dislocation: Assessment by MR imaging

International Nuclear Information System (INIS)

Johnson, N.D.; Wood, B.P.; Jackman, K.V.

1986-01-01

Dislocations of the infant hip, particularly those that responded poorly to standard treatment, were imaged using a 1.5-T MR imaging unit. Excellent detail of the cartilaginous structures of the femoral head, acetabulum, labrum, pulvinar, and capsular abnormalities was achieved. The most detailed images were obtained using a 3-inch surface coil. The shape and orientation of the acetabulum and femoral head cannot otherwise be as well evaluated, nor can their relationship be as clearly established. Technical factors and considerations of imaging with a 1.5-T magnet, the anatomy of the normal and dislocated hip, and observed variations in acetabular shape and orientation are discussed. MR imaging reliably demonstrates dislocation, and the prolonged T2 of synovial fluid produced an ''arthrogram'' effect, which is useful in the treatment of complicated hip dislocation

Effect of dislocations on spinodal decomposition in Fe-Cr alloys

International Nuclear Information System (INIS)

Li Yongsheng; Li Shuxiao; Zhang Tongyi

2009-01-01

Phase-field simulations of spinodal decomposition in Fe-Cr alloys with dislocations were performed by using the Cahn-Hilliard diffusion equation. The stress field of dislocations was calculated in real space via Stroh's formalism, while the composition inhomogeneity-induced stress field and the diffusion equation were numerically calculated in Fourier space. The simulation results indicate that dislocation stress field facilitates, energetically and kinetically, spinodal decomposition, making the phase separation faster and the separated phase particles bigger at and near the dislocation core regions. A tilt grain boundary is thus a favorable place for spinodal decomposition, resulting in a special microstructure morphology, especially at the early stage of decomposition.

Cortical visual impairment

OpenAIRE

Koželj, Urša

2013-01-01

In this thesis we discuss cortical visual impairment, diagnosis that is in the developed world in first place, since 20 percent of children with blindness or low vision are diagnosed with it. The objectives of the thesis are to define cortical visual impairment and the definition of characters suggestive of the cortical visual impairment as well as to search for causes that affect the growing diagnosis of cortical visual impairment. There are a lot of signs of cortical visual impairment. ...

Broken or dislocated jaw

Science.gov (United States)

... broken or dislocated jaw requires prompt medical attention. Emergency symptoms include difficulty breathing or heavy bleeding. ... safety equipment, such as a helmet when playing football, or using ... can prevent or minimize some injuries to the face or jaw.

Formation of helical dislocations in ammonothermal GaN substrate by heat treatment

International Nuclear Information System (INIS)

Horibuchi, Kayo; Yamaguchi, Satoshi; Kimoto, Yasuji; Nishikawa, Koichi; Kachi, Tetsu

2016-01-01

GaN substrate produced by the basic ammonothermal method and an epitaxial layer on the substrate was evaluated using synchrotron radiation x-ray topography and transmission electron microscopy. We revealed that the threading dislocations present in the GaN substrate are deformed into helical dislocations and the generation of the voids by heat treatment in the substrate for the first observation in the GaN crystal. These phenomena are formed by the interactions between the dislocations and vacancies. The helical dislocation was formed in the substrate region, and not in the epitaxial layer region. Furthermore, the evaluation of the influence of the dislocations on the leakage current of Schottky barrier diodes fabricated on the epitaxial layer is discussed. The dislocations did not affect the leakage current characteristics of the epitaxial layer. Our results suggest that the deformation of dislocations in the GaN substrate does not adversely affect the epitaxial layer. (paper)

Dislocation unpinning model of acoustic emission from alkali halide ...

Indian Academy of Sciences (India)

The present paper reports the dislocation unpinning model of acoustic emis- sion (AE) from ... Acoustic emission; dislocation; alkali halide crystals; plastic deformation. ..... [5] T Nishimura, A Tahara and T Kolama, Jpn. Metal Inst. 64, 339 (2000).

Bilateral Posterior Native Hip Dislocations after Fall from Standing

Directory of Open Access Journals (Sweden)

Jane Xiao

2017-10-01

Full Text Available We present a case of bilateral posterior native hip dislocations after a fall from standing. This exceedingly rare diagnosis is classically associated with younger patients whose bones are strong enough to dislocate rather than fracture in the setting of a high-momentum collision. We present an unusual case of an 88-year-old male with native hips who sustained a low-energy collision after falling from standing and was found to have bilateral posterior hip dislocations without associated pelvis or femur fractures.

Caudal dysgenesis and sirenomelia-single centre experience suggests common pathogenic basis.

Science.gov (United States)

Thottungal, Anjana D; Charles, Adrian K; Dickinson, Jan E; Bower, Carol

2010-10-01

Abnormally formed lower limbs with varying degrees of fusion are the major feature of sirenomelia whereas maldeveloped lower limbs without fusion are found in association with caudal dysgenesis (CD). The relationship between these two entities has been a topic of debate for many years. The presence of a single umbilical artery originating from the abdominal aorta was considered a major feature distinguishing sirenomelia from CD. Based on this finding, the vascular steal theory was put forward as the causative mechanism of sirenomelia. CD and sirenomelia were considered to be two entirely different entities with distinct pathogenic mechanisms. However, it is now clear that a single umbilical artery can be found in some patients of CD and normal umbilical arteries in some patients of sirenomelia. The hypothesis of primary deficiency of caudal mesoderm caused by early developmental disruption suggests that sirenomelia and CD are two ends of a spectrum of maldevelopment of caudal mesoderm. In this paper we report on the clinical and pathological features of 16 patients of CD and 9 patients of sirenomelia from our institution and review the literature. This series of cases is notable for the significant association with neural tube defects, refining the renal and urogenital pathology associated with these conditions, and supporting the concept of a continuum of the disease spectrum. Copyright © 2010 Wiley-Liss, Inc.

Superolateral Dislocation of Intact Mandibular Condyle: A Case Report and Review of Literature

OpenAIRE

Saikrishna, Degala; Shyam Sundar, S.; Mamata, K. S.

2015-01-01

Anteromedial fracture dislocation of the mandibular condyle is common but a superolateral dislocation of an intact condyle is quite rare. This type of dislocation is often misdiagnosed or completely overlooked and hence inadequately addressed. We report a case of a 41-year-old male patient who experienced superolateral dislocation of the intact condyle with symphysis fracture and panfacial fracture following a road-traffic accident, and review of literature of superolateral dislocations from ...

Diagnosis of Ehlers-Danlos syndrome after a first shoulder dislocation.

Science.gov (United States)

Nourissat, Geoffroy; Vigan, Marie; Hamonet, Claude; Doursounian, Levon; Deranlot, Julien

2018-01-01

Shoulder dislocation is often the first symptom of Ehlers-Danlos syndrome (EDS). Whether it occurs in early-onset EDS is unknown. In most cases, surgical failure leads to the diagnosis. We aimed to determine whether clinical symptoms can signal the presence of EDS at a first dislocation. In this retrospective study, we analyzed clinical and radiologic data for 27 patients with EDS and shoulder instability and a control population of 40 consecutive non-EDS patients undergoing surgery for an unstable shoulder. Data were collected on gender, age, single or bilateral disease, general hyperlaxity, shoulder hyperlaxity, number of dislocations or subluxations, nontraumatic onset, and pain specificity. Nerve and vascular injuries, joint disorders, and family history were recorded, and radiologic data were reported. Age 85°) did not differ between the groups. After a first dislocation in a young girl with global hyperlaxity but not necessarily shoulder hyperlaxity, painless atraumatic dislocation with pain after reduction can suggest EDS. Copyright © 2018. Published by Elsevier Inc.

Interlayer vortices and edge dislocations in high-temperature superconductors

International Nuclear Information System (INIS)

Kuklov, A.B.; Krakovsky, A.; Birman, J.L.

1995-01-01

The interaction of an edge dislocation made of half the superconducting plane with a magnetic interlayer vortex is considered within the framework of the Lawrence-Doniach model with negative as well as positive Josephson interlayer coupling. In the first case the binding energy of the vortex and the dislocation has been calculated by employing a variational procedure. The current distribution around the bound vortex turns out to be asymmetric. In the second case the dislocation carries a spontaneous magnetic half vortex, whose binding energy with the dislocation turns out to be infinite. The half-vortex energy has been calculated by the same variational procedure. Implications of the possible presence of such half vortices for the properties of high-temperature sueprconductors are discussed. We suggest employing artificially made superconductor-ferromagnet superlattices with the half plane removed to observe fractional vortices

Elastic field of approaching dislocation loop in isotropic bimaterial

International Nuclear Information System (INIS)

Wu, Wenwang; Xu, Shucai; Zhang, Jinhuan; Xia, Re; Qian, Guian

2015-01-01

A semi-analytical solution is developed for calculating interface traction stress (ITS) fields due to elastic modulus mismatch across the interface plane of isotropic perfectly bounded bimaterial system. Based on the semi-analytical approaches developed, ITS is used to correct the bulk elastic field of dislocation loop within infinite homogenous medium, and to produce continuous displacement and stress fields across the perfectly-bounded interface. Firstly, calculation examples of dislocation loops in Al–Cu bimaterial system are performed to demonstrate the efficiency of the developed semi-analytical approach; Then, the elastic fields of dislocation loops in twinning Cu and Cu–Nb bimaterial are analyzed; Finally, the effect of modulus mismatch across interface plane on the elastic field of bimaterial system is investigated, it is found that modulus mismatch has a drastic impact on the elastic fields of dislocation loops within bimaterial system. (paper)

Ubiquity of quantum zero-point fluctuations in dislocation glide

Science.gov (United States)

Landeiro Dos Reis, Marie; Choudhury, Anshuman; Proville, Laurent

2017-03-01

Modeling the dislocation glide through atomic scale simulations in Al, Cu, and Ni and in solid solution alloys Al(Mg) and Cu(Ag), we show that in the course of the plastic deformation the variation of the crystal zero-point energy (ZPE) and the dislocation potential energy barriers are of opposite sign. The multiplicity of situations where we have observed the same trend allows us to conclude that quantum fluctuations, giving rise to the crystal ZPE, make easier the dislocation glide in most materials, even those constituted of atoms heavier than H and He.

Strength of Dislocation Junctions in FCC-monocrystals with a [\\overline{1}11] Deformation Axis

Science.gov (United States)

Kurinnaya, R. I.; Zgolich, M. V.; Starenchenko, V. A.

2017-07-01

The paper examines all dislocation reactions implemented in FCC-monocrystals with axis deformation oriented in the [\\overline{1}11] direction. It identifies the fracture stresses of dislocation junctions depending on intersection geometry of the reacting dislocation loop segments. Estimates are produced for the full spectrum of reacting forest dislocations. The paper presents the statistical data of the research performed and identifies the share of long strong dislocation junctions capable of limiting the zone of dislocation shift.

Superior dislocation hip with anterior column acetabular fracture ...

African Journals Online (AJOL)

Superior variety of anterior dislocation of the hip is a rare injury. Its occurrence with acetabular fractures has been documented infrequently. We report a case of superior dislocation of the hip with anterior column acetabular fracture. Open reduction of the hip and internal fixation of the fracture was carried out using a twin ...

Using a scalar parameter to trace dislocation evolution in atomistic modeling

Energy Technology Data Exchange (ETDEWEB)

Yang, Jinbo [ORNL; Zhang, Z F [Shenyang National Laboratory for Materials Science; Osetskiy, Yury N [ORNL; Stoller, Roger E [ORNL

2015-01-01

A scalar gamma-parameter is proposed from the Nye tensor. Its maximum value occurs along a dislocation line, either straight or curved, when the coordinate system is purposely chosen. This parameter can be easily obtained from the Nye tensor calculated at each atom in atomistic modeling. Using the gamma-parameter, a fully automated approach is developed to determine core atoms and the Burgers vectors of dislocations simultaneously. The approach is validated by revealing the smallest dislocation loop and by tracing the whole formation process of complicated dislocation networks on the fly.

Superior shoulder suspensory complex fracture dislocation case report

International Nuclear Information System (INIS)

Lidgett, T.; Bate, E.; Pittock, L.

2017-01-01

Background: Acromioclavicular joint dislocation can be more complex than it first appears. The presented case had an unusual combination of injuries to the superior shoulder suspensory complex, which yielded some interesting learning points. Case summary: The injuries were sustained after a fall from a push bike and included acromioclavicular dislocation with coracoid process, clavicle and acromion process fractures. These were identified on the initial X-ray examination, which was followed by computed tomography for surgical planning. The injuries were successfully treated by internal fixation. Conclusion: The unexpected complexity of the injuries could have led to subtle but important findings being overlooked. This case highlights the importance of a thorough search strategy, consideration of injury biomechanics and knowledge of associated injuries. - Highlights: • Search for associated fractures in acromioclavicular joint dislocation. • Assess the clavicle, acromion process and coracoid process in particular. • Do not end the shoulder X-ray examination after seeing one injury. • Both axial and cranially angulated anteroposterior projections are beneficial. • Acromioclavicular joint fracture dislocation treatment may require further research.

Diffraction contrast STEM of dislocations: Imaging and simulations

International Nuclear Information System (INIS)

Phillips, P.J.; Brandes, M.C.; Mills, M.J.; De Graef, M.

2011-01-01

The application of scanning transmission electron microscopy (STEM) to crystalline defect analysis has been extended to dislocations. The present contribution highlights the use of STEM on two oppositely signed sets of near-screw dislocations in hcp α-Ti with 6 wt% Al in solid solution. In addition to common systematic row diffraction conditions, other configurations such as zone axis and 3g imaging are explored, and appear to be very useful not only for defect analysis, but for general defect observation. It is demonstrated that conventional TEM rules for diffraction contrast such as g.b and g.R are applicable in STEM. Experimental and computational micrographs of dislocations imaged in the aforementioned modes are presented. -- Highlights: → STEM defect analysis has been extended to include dislocations. → Systematic row, zone axis and 3g diffraction conditions are all found to be useful for general defect observations in STEM mode. → Conventional contrast visibility rules for diffraction contrast are found to remain valid for STEM observations. → Multi-beam dynamical scattering matrix simulations provide excellent agreement with experimental images.

Spontaneous evolution of an unusual cortical malformation in SOX2 anophthalmia syndrome

Directory of Open Access Journals (Sweden)

Jay Desai

2013-01-01

Full Text Available Brain malformations such as agenesis and dysgenesis of corpus callosum, pituitary hypoplasia, hypothalamic hamartoma, mesial temporal periventricular heterotopia, and abnormally oriented and misshapen hippocampi have been described with SOX2 gene mutations. A neocortical malformation is presented here in association with SOX2 deletion that over time underwent spontaneous evolution and decrease in size.

Traumatic anterior hip dislocation in a 12-year-old child

Directory of Open Access Journals (Sweden)

Gupta Vinay

2013-04-01

Full Text Available 【Abstract】Hip dislocation in children can occur congenitally in isolation or in conjunction with other con-genital abnormalities. Traumatic hip dislocations in children are relatively uncommon and anterior dislocation of hip joint is even rarer. We report such a case following unusual mode of injury in a 12-year-old child. The patient underwent suc-cessful emergent closed reduction of left hip. The clinical course and follow-up assessment of the patient was other-wise uneventful. At 2 years’ follow-up there was no evi-dence of osteoarthritis, coxa magna, heterotrophic calcification, in congruency of the joints or avascular ne-crosis of the head of femur. Key words: Hip; Dislocations; Child

Contribution of dislocation creep to the radiational creep of materials

International Nuclear Information System (INIS)

Borodin, V.A.; Ryazanov, A.I.

1986-01-01

The authors propose a model of the orientational dependences of the preferences of discrete linear dislocations in which the influence of the external load on the step concentration at the dislocations is taken into account. The use of this model, taking into account the mechanism of stress-induced anisotropy of the elastic interaction between point defects and dislocations, not only permits a correct qualitative explanation of the dependence of the rate of radiational creep on the basic irradiation parameters (dose, stress, temperature) but also allows approximate quantitative agreement with experimental results to be obtained. At sufficiently high stress, the theory predicts conditions of the formation of an ensemble of dislocational loops with a specific direction of the Burgers vector

Traumatic Posterior Dislocation of Hip in Child: A Case Report

Directory of Open Access Journals (Sweden)

Dinesh Dhar

2017-07-01

Full Text Available Traumatic hip dislocation in children is uncommon, but like in adults, it is an orthopedic emergency. We report a rare case of traumatic posterior dislocation left hip in a 9 year old boy following a motor vehicle accident. The dislocation was promptly reduced by closed manipulation in Accident and Emergency Department with the application of above knee skin traction which was maintained for 3 weeks  followed by non-weight bearing crutch walking for another 6 weeks. On follow up, the patient had a good outcome without any evidence of avascular necrosis (AVN. In this rare case report a literature review of pediatric hip dislocation with treatment recommendations have been highlighted.

Dislocation motion in tungsten: Atomistic input to discrete dislocation simulations

Czech Academy of Sciences Publication Activity Database

Srivastava, K.; Gröger, Roman; Weygand, D.; Gumbsch, P.

2013-01-01

Roč. 47, AUG (2013), s. 126-142 ISSN 0749-6419 R&D Projects: GA ČR GAP204/10/0255; GA MŠk(CZ) ED1.1.00/02.0068 Institutional support: RVO:68081723 Keywords : body -centered cubic * non-Schmid effects * anomalous slip * discrete dislocation dynamics Subject RIV: BM - Solid Matter Physics ; Magnetism; BM - Solid Matter Physics ; Magnetism (UFM-A) Impact factor: 5.971, year: 2013

Cellular growth and dislocation structures in laser-nitrided titanium

NARCIS (Netherlands)

Kloosterman, A.B.; Hosson, J.Th.M. De

1997-01-01

Transmission electron microscopic observations were made of different dislocation structures in laser-nitrided titanium. Equidistant edge dislocations in the bulk and periodic surface structures exhibit a periodicity within the same order of magnitude. An analysis is presented in which both periodic

Bilateral congenital corneal keloids and anterior segment mesenchymal dysgenesis in a case of Rubinstein-Taybi syndrome.

Science.gov (United States)

Rao, Srinivas K; Fan, Dorothy S P; Pang, C P; Li, Winnie W Y; Ng, Joan S K; Good, William V; Lam, Dennis S C

2002-01-01

To report the unusual association of bilateral corneal keloids and anterior segment mesenchymal dysgenesis in a child with Rubinstein-Taybi syndrome. Case report of a 2-year-old boy. Excision of the epicorneal mass in the right eye was followed by recurrence of the lesion. Multiple penetrating keratoplasties were unsuccessful in reconstructing the anterior segment because of recurrent corneal epithelial breakdown, suggesting limbal stem cell insufficiency. Histopathology and electron microscopy of the excised mass lesion showed features typical of a corneal keloid: thickened keratinized epithelium, absent Bowman's layer, and fibrovascular hyperplasia, with haphazard orientation of the collagen lamellae. Ultrasound biomicroscopy and intraoperative findings suggested a diagnosis of Peter anomaly, but genetic analysis did not show a PAX6 mutation. The findings in our patient add to the spectrum of ocular changes described in Rubinstein-Taybi syndrome and confirm earlier reports of poor ocular prognosis in corneal keloids and Rubinstein-Taybi syndrome.

Radiological difficulty in identifying unicompartmental knee replacement dislocation

Directory of Open Access Journals (Sweden)

Mr Oruaro Adebayo Onibere, MBBS, MRCS

2017-09-01

Full Text Available Unicondylar knee replacement is a relatively common elective orthopedic procedure but is not often seen in the Emergency Department setting. Familiarity with normal clinical and radiological appearances is difficult to gain. Dislocation of the mobile bearing component “spacer” is a known complication of unicondylar knee replacements, and these patients will initially present to the accident and Emergency Department. In this setting, an accurate and prompt diagnosis is necessary to appropriately manage the patient's condition. There is normally a radiological challenge in identifying dislocated mobile bearings on plain radiographs. These patients may need to have further imaging, such as a computer tomographic scan to identify the dislocated mobile bearing.

Locked posterior dislocation of the shoulder: A report of three cases.

Science.gov (United States)

Benhamida, M K; Ouertatani, M; Hasayri, I; Benhassine, A; Meherzi, M; Bouhdiba, S; Mestiri, M

2015-04-01

Posterior shoulder dislocations account for 4% of all shoulder dislocations. In two-thirds of the cases, the diagnosis is made only once the shoulder is locked, which radically changes the treatment and prognosis. We report three clinical cases of locked posterior shoulder dislocation. Closed reduction was attempted in one case but failed. All patients underwent open reduction and subscapularis transfer according to either Neer's (2 cases) or McLaughlin's technique (1 case). The functional outcome was satisfactory in two cases despite recurrent dislocation on the third day after surgery. The third patient eventually developed post-traumatic shoulder osteoarthritis. The best treatment consists of detecting posterior dislocations immediately when they occur under suggestive circumstances (electrocution, epileptic seizure, severe trauma shoulder). Copyright © 2015 Elsevier Masson SAS. All rights reserved.

recurrent traumatic posterior hip dislocation in labral avulsion

African Journals Online (AJOL)

2003; 54(3):520-529. 5. Dameron, T.B Jr. Bucket-handle tear of acetabular labrum accompanying posterior dislocation of the hip. J Bone Joint Surg Am. 1959; 41(1): 131-134. 6. Lieberman, J.R., Altchek, D.W. and Salvati,. E.A. Recurrent dislocation of a hip with a labral lesion: treatment with a modified Bankart-type repair.

Bilateral recurrent anterior fracture dislocation of shoulder joint due to grand mal epileptic convulsions

Directory of Open Access Journals (Sweden)

Chandrashekara Chowdipalya Maliyappa

2013-01-01

Full Text Available Bilateral shoulder dislocation is very much common with convulsions of different etiology. Often, these dislocations are associated with fractures due to violent muscle contractions. The typical lesion is bilateral posterior dislocation or fracture dislocations. The recurrent shoulder dislocations are common with traumatic etiology. The lack of asymmetry of the shoulders is stressed as a potential pitfall in the clinical evaluation of patients with this condition. We present a rare case of bilateral recurrent anterior fracture dislocation of the shoulder sustained due to repetitive episodes of convulsive seizures. Patient was treated by close reductions and immobilization on each episode. In epilepsy although posterior dislocations are common, the rare possibility of bilateral anterior fracture dislocation should be kept in mind. Often these patients are vulnerable for recurrence, similar to traumatic cases.

Uncovering the inertia of dislocation motion and negative mechanical response in crystals.

Science.gov (United States)

Tang, Yizhe

2018-01-09

Dislocations are linear defects in crystals and their motion controls crystals' mechanical behavior. The dissipative nature of dislocation propagation is generally accepted although the specific mechanisms are still not fully understood. The inertia, which is undoubtedly the nature of motion for particles with mass, seems much less convincing for configuration propagation. We utilize atomistic simulations in conditions that minimize dissipative effects to enable uncovering of the hidden nature of dislocation motion, in three typical model metals Mg, Cu and Ta. We find that, with less/no dissipation, dislocation motion is under-damped and explicitly inertial at both low and high velocities. The inertia of dislocation motion is intrinsic, and more fundamental than the dissipative nature. The inertia originates from the kinetic energy imparted from strain energy and stored in the moving core. Peculiar negative mechanical response associated with the inertia is also discovered. These findings shed light on the fundamental nature of dislocation motion, reveal the underlying physics, and provide a new physical explanation for phenomena relevant to high-velocity dislocations.

Phase-field simulation of lenticular martensite and inheritance of the accommodation dislocations

Directory of Open Access Journals (Sweden)

Kundin Julia

2015-01-01

Full Text Available A phase-field simulation is performed to study the substructure evolution of lenticular martensite in TRIP steels. The evolution of martensitic phase variants and dislocations is calculated by a coupled phase-field micro-elasticity model. The simulations at isothermal conditions show that during the phase transformation, the accommodation dislocations evolving in the austenite are inherited by the martensitic phase and cause the further evolution of a single martensitic variant in the direction of the dislocation slip. As a result of the interaction, a change of the growth mode from twining to slip can be observed in accordance to the substructure formation of lenticular martensite. This interaction between the dislocations and martensitic phase depends on dislocation slip systems and the orientation of the martensitic variants as well as on the energy barriers for the phase transformation and for the dislocation motion.

Inhomogenous Dislocation Nucleation Based on Atom Potential in Hexagonal Noncentrosymmetric Crystal Sheet

International Nuclear Information System (INIS)

Xue-Chuan, Zhao; Xiao-Ming, Liu; Zhuo, Zhuang; Zhan-Li, Liu; Yuan, Gao

2010-01-01

By introducing internal degree, the deformation of hexagonal noncentrosymmetric crystal sheet can be described by the revised Cauchy–Born rule based on atomic potential. The instability criterion is deduced to investigate the inhomogeneous dislocation nucleation behavior of the crystal sheet under simple loading. The anisotropic characters of dislocation nucleation under uniaxial tension are studied by using the continuum method associated with the instability criterion. The results show a strong relationship between yield stress and crystal sheet chirality. The results also indicate that the instability criterion has sufficient ability to capture the dislocation nucleation site and expansion. To observe the internal dislocation phenomenon, the prediction of the dislocation nucleation site and expansion domain is illustrated by MD simulations. The developed method is another way to explain the dislocation nucleation phenomenon. (condensed matter: structure, mechanical and thermal properties)

Solute effects on edge dislocation pinning in complex alpha-Fe alloys

Science.gov (United States)

Pascuet, M. I.; Martínez, E.; Monnet, G.; Malerba, L.

2017-10-01

Reactor pressure vessel steels are well-known to harden and embrittle under neutron irradiation, mainly because of the formation of obstacles to the motion of dislocations, in particular, precipitates and clusters composed of Cu, Ni, Mn, Si and P. In this paper, we employ two complementary atomistic modelling techniques to study the heterogeneous precipitation and segregation of these elements and their effects on the edge dislocations in BCC iron. We use a special and highly computationally efficient Monte Carlo algorithm in a constrained semi-grand canonical ensemble to compute the equilibrium configurations for solute clusters around the dislocation core. Next, we use standard molecular dynamics to predict and analyze the effect of this segregation on the dislocation mobility. Consistently with expectations our results confirm that the required stress for dislocation unpinning from the precipitates formed on top of it is quite large. The identification of the precipitate resistance allows a quantitative treatment of atomistic results, enabling scale transition towards larger scale simulations, such as dislocation dynamics or phase field.

A Rare Case Report of an Unusual Dislocation of Fractured Mandibular Condyle

OpenAIRE

Mishra, Madan; Singh, Gaurav

2015-01-01

Several cases have been reported regarding superolateral, posterior, or superior dislocation of mandibular condyle. The anteromedial dislocation of fractured condyle is the most common among all. This article reports an unusual and unique case of dislocated fractured mandibular condyle wherein the fractured left condylar head was dislocated to the left anatomic angle of mandible. We have not found a single such case in the world English literature published till date. The presented case falls...

Dislocation structures around crack tips of fatigued polycrystalline copper

International Nuclear Information System (INIS)

Kaneko, Yoshihisa; Ishikawa, Masao; Hashimoto, Satoshi

2005-01-01

Dislocation structures near fatigue cracks of polycrystalline copper specimens were analyzed using the electron channelling contrast imaging (ECCI) technique. Prior to the ECCI observations, optical microscopy was conducted to classify the fatigue crack morphologies into several kinds. It was found that the dislocation structures were correlated with the slip morphologies observed using the optical microscope. The cell structure almost corresponded to the severely deformed plastic zone where the individual slip bands could not be identified. The labyrinth dislocation structure was detected at the double-slip region. Ladder-like dislocation structure was detected ahead of the Stage I type fatigue crack. Hence, it can be said that the persistent slip band (PSB) was a favorable crack path. However, the microscopic route of the crack growth was not along the PSB but along the cell structure, which was developed locally in the vicinity of the crack tip

Misoriented dislocation substructures and the fracture of polycrystalline Cu-Al alloys

Science.gov (United States)

Koneva, N. A.; Trishkina, L. I.; Cherkasova, T. V.; Kozlov, E. V.

2016-10-01

The evolution of the dislocation substructure in polycrystalline Cu-Al alloys with various grain sizes is studied during deformation to failure. A relation between the fracture of the alloys and the forming misorientation dislocation substructures is revealed. Microcracks in the alloy are found to form along grain boundaries and the boundaries of misoriented dislocation cells and microtwins.

Molecular dynamics simulation of cross-slip and the intersection of dislocations in copper

CERN Document Server

Li, Maozhen; Gao, K W; Qiao, L J

2003-01-01

The molecular dynamics method is used to simulate cross-slip by thermal activation at 30 K and the intersection of dislocations in copper containing 1.6 x 10 sup 6 atoms using the embedded atom method potential. The results show that an extended screw dislocation can recombine through thermal activation at 30 K into a constriction on the surface because of stress imbalance and the constriction will split again in the other slip plane. Removing the constriction along the extended dislocation results in a cross-slip of the screw dislocation at low temperature. After the intersection between a moving right-hand screw dislocation DC and a perpendicular left-hand dislocation BA, whose ends are fixed on the surfaces, an extended jog corresponding to a row of one-third vacancies forms in BA and a trail of vacancies behind DC. If the intersected dislocation is a right-hand screw dislocation AB, the jog formed in AB corresponds to a row of one-third interstitials and the point defects behind DC are interstitials. Afte...

Trapping of hydrogen and helium at an {110}<111> edge dislocation in tungsten

Energy Technology Data Exchange (ETDEWEB)

Xie, Hongxian, E-mail: hongxianxie@163.com [School of Mechanical Engineering, Hebei University of Technology, Tianjin 300132 (China); Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, Tianjin 300132 (China); Xu, Ke [School of Physics & Nuclear Energy Engineering, Beihang University, Beijing 100191 (China); Lu, Guang-Hong, E-mail: LGH@buaa.edu.cn [School of Physics & Nuclear Energy Engineering, Beihang University, Beijing 100191 (China); Yu, Tao [Central Iron and Steel Research Institute, Beijing 100081 (China); Yin, Fuxing [Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, Tianjin 300132 (China); Research Institute for Energy Equipment Materials, Hebei University of Technology, Tianjin 300132 (China)

2017-02-15

We have performed an atomistic simulation to investigate energetics and dynamic behaviour of hydrogen (H) and helium (He) at an {110}<111> edge dislocation in tungsten (W). The edge dislocation is shown to attract H/He at the tensile stress region according to the negative interaction energy of H/He at the tensile stress region, which implies that the dislocation is energetically beneficial to accommodate both H and He. Dynamically both H and He are easy to diffuse into the dislocation core, indicating the ‘down-hill’ diffusion due to the presence of the dislocation serving as a trapping center for both H and He. Further, He exhibits much lower interaction energy and much faster diffusion into the dislocation core region as compared with H owing to the close shell electronic structure of He. The results suggest the edge dislocation as a trapping center facilitates the H/He accumulation, contributing to the understanding the role of the dislocation on the H/He accumulation and bubble formation in W.

High temperature dislocation processes in precipitation hardened crystals investigated by a 3D discrete dislocation dynamics

Czech Academy of Sciences Publication Activity Database

Záležák, Tomáš; Svoboda, Jiří; Dlouhý, Antonín

2017-01-01

Roč. 97, OCT (2017), s. 1-23 ISSN 0749-6419 R&D Projects: GA ČR(CZ) GA14-22834S; GA ČR(CZ) GA202/09/2073; GA ČR(CZ) GD106/09/H035; GA MŠk(CZ) EE2.3.20.0214; GA MŠk OC 162 EU Projects: European Commission(XE) 309916 - Z-ULTRA Institutional support: RVO:68081723 Keywords : 3D discrete dislocation dynamics * Dislocations * Strengthening mechanisms * Low angle grain boundaries * Particulate reinforced material Subject RIV: JI - Composite Materials OBOR OECD: Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics Impact factor: 5.702, year: 2016

Transscaphoid, transcapitate, perilunate fracture dislocation (Scaphocapitate syndrome)

International Nuclear Information System (INIS)

Resnik, C.S.; Resnick, D.; Gelberman, R.H.

1983-01-01

Five cases of transscaphoid, transcapitate, perilunate fracture dislocation have been presented with a discussion of the radiologic findings, mechanism of injury, and the method of treatment. Although a total of only 23 cases have now been reported in the literature, this type of injury is probably not rare as we have seen two cases within a span of six months. It is important to recognize the radiologic features of this fracture dislocation so appropriate therapy may be instituted. (orig.)

Posterior sternoclavicular dislocation: an American football injury

DEFF Research Database (Denmark)

Marker, L B; Klareskov, B

1996-01-01

Posterior dislocation of the sternoclavicular joint is uncommon, accounting for less than 0.1% of all dislocations. Since 1824 a little more than 100 cases have been reported, and the majority in the past 20 years. A review of published reports suggests that this injury is seen particularly in co...... in connection with American football. A typical case is described. The importance of this injury is that there is often a delay in diagnosis with potentially serious complications....

Interface dislocations in In{sub x}Ga{sub 1-x}N/GaN heterostructures

Energy Technology Data Exchange (ETDEWEB)

Li, Q.T.; Minj, A.; Chauvat, M.P.; Chen, J.; Ruterana, P. [CIMAP UMR 6252, CNRS ENSICAEN UCBN CEA, Caen (France)

2017-04-15

Interface dislocations have been investigated by transmission electron microscopy for In{sub x}Ga{sub 1-x}N (50 nm)/GaN heterostructures grown by metal-organic vapor phase epitaxy for 0.13 < x < 0.20. Structural properties of the dislocations were analysed by conventional transmission electron microscopy by diffraction contrast. We observed two kinds of dislocations lying in the interface: screw type dislocations with Burgers vector b = a = 1/3 <11-20> and pure edge misfit dislocations. The screw type dislocations were observed for x ≤ 0.17 and misfit dislocations for x ≥ 0.18. While the formation of MDs may be explained in the framework of conventional interface strain relaxation, the presence of screw-type dislocations may bring new insight on processes in hexagonal materials heteroepitaxy. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

[Bilateral chronic dislocation of the temporomandibular joints and Meige syndrome].

Science.gov (United States)

Arzul, L; Henoux, M; Marion, F; Corre, P

2015-04-01

Chronic dislocation of the temporo-mandibular joint (TMJ) is rare. It occurs when an acute dislocation is left untreated, in certain situations, including severe illness, neurologic or psychiatric diseases or prolonged oral intubation. A 79 years old woman, with Meige syndrome, suffered from bilateral dislocation of the TMJ for over 1 year. Surgical repositioning of the mandibular condyles and temporal bone eminectomy were performed. At the 18 postoperative months control, no recurrence has been noted. Treatment of chronic TMJ dislocations often requires a surgical procedure. Manual reduction, even under general anaesthesia, often fails because of severe muscular spasm and periarticular fibrotic changes. The management of this disorder is still controversial. We review available surgical procedures. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Dislocation dipole annihilation in diamond and silicon

Energy Technology Data Exchange (ETDEWEB)

Rabier, J; Pizzagalli, L, E-mail: jacques.rabier@univ-poitiers.fr [Institut PPRIMME, Departement de Physique et Mecanique des Materiaux - UPR 3346 CNRS, Universite de Poitiers, ENSMA - SP2MI, BP 30179, F-86962 Chasseneuil Futuroscope Cedex (France)

2011-02-01

The mechanism of dislocation dipole annihilation has been investigated in C and Si using atomistic calculations with the aim of studying their annihilation by-products. It is shown, in C as well as in Si, that dipole annihilation yields debris that can be depicted as a cluster of vacancies, or alternately by two internal free surfaces. These defects have no strain field and can hardly be seen using usual TEM techniques. This suggests that the brown colouration of diamond could be due to microstructures resulting from deformation mechanisms associated with dipole formation and their annihilation rather than to a climb mechanism and vacancy aggregation. In silicon where a number of dipoles have been evidenced by TEM when dislocation trails are found, such debris could be the missing link responsible for the observation of strong chemical reactivity and electrical activity in the wake of moving dislocations.

BILATERAL PATHOLOGICAL HIP DISLOCATION IN CHILDREN

Directory of Open Access Journals (Sweden)

Yuriy E. Garkavenko

2017-03-01

Full Text Available Introduction. Pathological dislocation of the hip is one of the most severe complications of acute hematogenous osteomyelitis. The program of treatment for children with pathological hip dislocation is complex, but it has been sufficiently developed and implemented very successfully. At the same time, the available literature provides no cases of treating children with bilateral pathological hip dislocations after hematogenous osteomyelitis. There is no information on the incidence of such cases or in regards to remote functional results. Materials and methods. The results of the treatment of 18 children with bilateral pathological dislocation of the hip after hematogenous osteomyelitis are presented, which constituted 23.1% of the total number of patients (78 who underwent surgery in 2000–2016 for the diagnosis of pathological hip dislocation. Both hip joints were surgically operated on in 12 patients, while one hip joint was operated on in 6 patients. To assess the anatomical and functional state of hip joints, the clinical and roentgenological diagnostic techniques were used. Results and discussion. To stabilize and restore the function of the hip joints, 18 children underwent 30 surgical interventions: simple open hip reduction (19 and open hip reduction with hip arthroplasty with one (6 or two (5 demineralized osteochondral allogeneic grafts. The decision regarding the possibility of performing surgical intervention on the second hip joint was made only after a child's check-up examination was complete and after positive information about the anatomical and functional state of the operated hip joint was obtained. According to these criteria, 14 (77.8% children underwent surgical treatment of the second hip joint 1–1.5 years after the course of conservative measures to restore the range of motion in the previously operated hip joint. Over a period of 1–12 years, 17 patients were examined, 10 of which underwent an operation on both

Dependence of dislocation structure on orientation and slip systems in highly oriented nanotwinned Cu

DEFF Research Database (Denmark)

Lu, Qiuhong; You, Zesheng; Huang, Xiaoxu

2017-01-01

slip Mode I and II are active with dominance of Mode II. In structures deformed at 45° dislocations from slip Modes I, II and III are identified, where Mode III dislocations consist of partial dislocations moving along the TBs and full dislocations inside the twin lamellae gliding on the slip planes...... parallel to the twin plane. The analysis of the dislocation structures illustrate the strong correlation between active slip systems and the dislocation structure and the strong effect of slip mode anisotropy on both the flow stress and strain hardening rate of nanotwinned Cu....

Ascus dysgenesis in hybrid crosses of Neurospora and Sordaria (Sordariaceae).

Science.gov (United States)

Kasbekar, Durgadas P

2017-07-01

When two lineages derived from a common ancestor become reproductively isolated (e.g. Neurospora crassa and N. tetrasperma), genes that have undergone mutation and adaptive evolution in one lineage can potentially become dysfunctional when transferred into the other, since other genes have undergone mutation and evolution in the second lineage, and the derived alleles were never 'tested' together before hybrid formation. Bateson (1909), Dobzhansky (1936), and Muller (1942) recognized that incompatibility between the derived alleles could potentially make the hybrid lethal, sterile, or display some other detriment. Alternatively, the detrimental effects seen in crosses with the hybrids may result from the silencing of ascus-development genes by meiotic silencing by unpaired DNA (MSUD). Aberrant transcripts from genes improperly paired in meiosis are processed into single-stranded MSUD-associated small interfering RNA (masiRNA), which is used to degrade complementary mRNA. Recently, backcrosses of N. crassa / N. tetrasperma hybrid translocation strains with wild-type N. tetrasperma were found to elicit novel ascus dysgenesis phenotypes. One was a transmission ratio distortion that apparently disfavoured the homokaryotic ascospores formed following alternate segregation. Another was the production of heterokaryotic ascospores in eight-spored asci. Lewis (1969) also had reported sighting rare eight-spored asci with heterokaryotic ascospores in interspecific crosses in Sordaria, a related genus. Ordinarily, in both Neurospora and Sordaria, the ascospores are partitioned at the eight-nucleus stage, and ascospores in eight-spored asci are initially uninucleate. Evidently, in hybrid crosses of the family Sordariaceae, ascospore partitioning can be delayed until after one or more mitoses following the postmeiotic mitosis.

Kinetic Interaction of Uranium Vacancies and Dislocations in UO₂

Energy Technology Data Exchange (ETDEWEB)

Uberuaga, Blas P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Goyal, Anuj [Univ. of Florida, Gainesville, FL (United States); Subramanian, Gopinath [Univ. of South Mississippi, Hattiesburg, MS (United States); Andersson, Anders David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-10-25

Understanding how point defects and defect clusters interact with dislocations in urania is important for a number of phenomena. For example, dislocations are one (of many) trap sites in the fuel where fission gases may accumulate and ultimately nucleate fission gas bubbles. Further, some creep mechanisms are governed by the flow of point defects to dislocations. Thus, for a variety of reasons, it is important to examine how dislocations attract and accelerate the kinetics of point defects.

Hip arthroscopy versus open surgical dislocation for femoroacetabular impingement

Science.gov (United States)

Zhang, Dagang; Chen, Long; Wang, Guanglin

2016-01-01

Abstract Background: This meta-analysis aims to evaluate the efficacy and safety of hip arthroscopy versus open surgical dislocation for treating femoroacetabular impingement (FAI) through published clinical trials. Methods: We conducted a comprehensive literature search using PUBMED, EMBASE, and the Cochrane Central Register of Controlled Trials databases for relevant studies on hip arthroscopy and open surgical dislocation as treatment options for FAI. Results: Compared with open surgical dislocation, hip arthroscopy resulted in significantly higher Nonarthritic Hip Scores (NAHS) at 3- and 12-month follow-ups, a significant improvement in NAHS from preoperation to 3 months postoperation, and a significantly lower reoperation rate. Open surgical dislocation resulted in a significantly improved alpha angle by the Dunn view in patients with cam osteoplasty from preoperation to postoperation, compared with hip arthroscopy. This meta-analysis demonstrated no significant differences in the modified Harris Hip Score, Hip Outcome Score-Activities of Daily Living, or Hip Outcome Score-Sport Specific Subscale at 12 months of follow-up, or in complications (including nerve damage, wound infection, and wound dehiscence). Conclusion: Hip arthroscopy resulted in higher NAHS and lower reoperation rates, but had less improvement in alpha angle in patients with cam osteoplasty, than open surgical dislocation. PMID:27741133

Plastic deformation of uranium dioxide: observation of the sub-structures of dislocations

International Nuclear Information System (INIS)

Alamo, A.; Lefebvre, J.M.; Soullard, J.

1978-01-01

Single crystals of uranium dioxide were deformed in compression at imposed strain rates in the temperature range of 700 0 C to 1400 0 C. The crystals were oriented to promote slip over one or two slip systems of the family [100] and also on the [110] system. Thin films of the deformed specimens were examined by transmission electron microscopy. When [100] single glide system operates, the dislocation substructure consist of numerous dipoles, their edge components lying along directions. For the [100] double glide system the grain boundaries and dislocation hexagonal network are observed, the complexity of which increases with the nominal strain. Dislocation arrangments consisting of extensive cellular networks of tangling dislocations and hexagonal netting were detected for [110] system. The auxillary role of [111] planes on the dislocation cross slip from [100] and [110] system was demonstrated. Weak beam images suggest that dissociation of dislocations can occur. (Auth.)

A genome-wide association study of men with symptoms of testicular dysgenesis syndrome and its network biology interpretation

DEFF Research Database (Denmark)

Dalgaard, Marlene D; Weinhold, Nils; Edsgard, Stefan Daniel

2012-01-01

controls with excellent reproductive health. Furthermore, they developed a novel integrative method that combines GWAS data with other TDS-relevant data types and identified additional TDS markers. The most significant findings were replicated in an independent cohort of 671 Nordic men. Results Markers......Background Testicular dysgenesis syndrome (TDS) is a common disease that links testicular germ cell cancer, cryptorchidism and some cases of hypospadias and male infertility with impaired development of the testis. The incidence of these disorders has increased over the last few decades...... located in the region of TGFBR3 and BMP7 showed association with all TDS phenotypes in both the discovery and replication cohorts. An immunohistochemistry investigation confirmed the presence of transforming growth factor β receptor type III (TGFBR3) in peritubular and Leydig cells, in both fetal...

Timing of Surgical Reduction and Stabilization of Talus Fracture-Dislocations.

Science.gov (United States)

Buckwalter V, Joseph A; Westermann, Robert; Mooers, Brian; Karam, Matthew; Wolf, Brian

Talus fractures with associated dislocations are rare but have high rates of complications, including avascular necrosis (AVN). Management of these injuries involves urgent surgical reduction and fixation, although there are no definitive data defining an operative time frame for preserving the blood supply and preventing complications. To determine the effect of time to surgical reduction of talus fractures and talus fracture-dislocations on rates of AVN and posttraumatic osteoarthritis (PTOA), we retrospectively reviewed talus fractures surgically managed at a level I trauma center during the 10-year period 2003 to 2013. Operative reports were obtained and reviewed, and 3 independent reviewers, using the Hawkins and AO/OTA (Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association) systems, classified the injuries on plain radiographs. Analysis of AO/OTA 81 fractures with associated tibiotalar, subtalar, or talonavicular dislocations was performed. Primary outcomes were presence of AVN/PTOA and subsequent arthrodesis of tibiotalar or subtalar joints. We identified 106 surgically managed talus fractures. Rates of AVN/PTOA were 41% for all talus fractures and 50% for talus fracture-dislocations. Mean time to surgical reduction was not significant for development of AVN/PTOA for all talus fractures (P = .45) or talus fracture-dislocations (P = .29). There was no difference in age (P = .20), body mass index (P = .45), or polytrauma (P = .79) between patients who developed AVN and those who did not. Open fractures were significantly correlated with the development of AVN/PTOA (P = .009). Talar fracture-dislocations are devastating injuries with high rates of complications. Our data suggest there is no effect of time from injury to surgical reduction of talus fractures or talus fracture-dislocations on rates of AVN and PTOA.

Influence of the dislocation core on the glide of the 1/2 < 111 >{110} edge dislocation in bcc-iron: An embedded atom method study

Czech Academy of Sciences Publication Activity Database

Haghighat, S.M.H.; von Pezold, J.; Race, C. P.; Kormann, F.; Friák, Martin; Neugebauer, J.; Raabe, D.

2014-01-01

Roč. 87, MAY (2014), s. 274-282 ISSN 0927-0256 Institutional support: RVO:68081723 Keywords : Molecular dynamics * Edge dislocation * Core structure * Dislocation glide * Iron Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.131, year: 2014

Plastic deformation of tubular crystals by dislocation glide.

Science.gov (United States)

Beller, Daniel A; Nelson, David R

2016-09-01

Tubular crystals, two-dimensional lattices wrapped into cylindrical topologies, arise in many contexts, including botany and biofilaments, and in physical systems such as carbon nanotubes. The geometrical principles of botanical phyllotaxis, describing the spiral packings on cylinders commonly found in nature, have found application in all these systems. Several recent studies have examined defects in tubular crystals associated with crystalline packings that must accommodate a fixed tube radius. Here we study the mechanics of tubular crystals with variable tube radius, with dislocations interposed between regions of different phyllotactic packings. Unbinding and separation of dislocation pairs with equal and opposite Burgers vectors allow the growth of one phyllotactic domain at the expense of another. In particular, glide separation of dislocations offers a low-energy mode for plastic deformations of solid tubes in response to external stresses, reconfiguring the lattice step by step. Through theory and simulation, we examine how the tube's radius and helicity affects, and is in turn altered by, the mechanics of dislocation glide. We also discuss how a sufficiently strong bending rigidity can alter or arrest the deformations of tubes with small radii.

Steps and dislocations in cubic lyotropic crystals

International Nuclear Information System (INIS)

Leroy, S; Pieranski, P

2006-01-01

It has been shown recently that lyotropic systems are convenient for studies of faceting, growth or anisotropic surface melting of crystals. All these phenomena imply the active contribution of surface steps and bulk dislocations. We show here that steps can be observed in situ and in real time by means of a new method combining hygroscopy with phase contrast. First results raise interesting issues about the consequences of bicontinuous topology on the structure and dynamical behaviour of steps and dislocations

Temporo-mandibular joint dislocation: an unusual complication of transoesophageal echocardiography.

Science.gov (United States)

Anantharam, Brijesh; Chahal, Navtej; Stephens, Nigel; Senior, Roxy

2010-03-01

Temporo-mandibular joint (TMJ) dislocation is an unusual complication of transoesophageal echocardiography (TEE). We report a rare case of bilateral TMJ dislocation in an 84-year-old man prior to DC cardioversion (DCCV) for atrial flutter. Shortly after TEE and DCCV, the patient complained of bilateral facial pain. An orthopantomogram revealed bilateral TMJ dislocation. A closed reduction was performed by maxillo-facial surgeons under intravenous anaesthesia. Although very uncommon, the physician should be aware of the complication and its management.

Investigation of dislocations in 8° off-axis 4H-SiC epilayer

International Nuclear Information System (INIS)

Rui-Xia, Miao; Yu-Ming, Zhang; Yi-Men, Zhang; Xiao-Yan, Tang; Qing-Feng, Gai

2010-01-01

This paper reports that the etching morphology of dislocations in 8° off-axis 4H-SiC epilayer is observed by using a scanning electronic microscope. It is found that different types of dislocations correspond with different densities and basal plane dislcation (BPD) array and threading edge dislocation (TED) pileup group lie along some certain crystal directions in the epilayer. It is concluded that the elastic energy of threading screw dislocations (TSDs) is highest and TEDs is lowest among these dislocations, so the density of TSDs is lower than TEDs. The BPDs can convert to TEDs but TSDs can only propagate into the epilyer in spite of the higher elastic energy than TEDs. The reason of the form of BPDs array in epilayer is that the big step along the basal plane caused by face defects blocked the upstream atoms, and TEDs pileup group is that the dislocations slide is blocked by dislocation groups in epilayer. (condensed matter: structure, thermal and mechanical properties)

Dislocation arrangement in the plastic zone for propagating cracks in nickel

International Nuclear Information System (INIS)

Kobayashi, S.; Ohr, S.M.

1985-01-01

Since nickel is a metal of high stacking fault energy, it is of interest to study the arrangement of dislocations in the plastic zone for propagating cracks and to compare the results with those found in metals of low stacking fault energy. It has been found that two distinct distributions of dislocations in the plastic zone are associated with cracks in nickel. In one of these, the plastic zone appeared as a thin ribbon and consisted of a number of partial dislocations with stacking fault fringes. From contrast analysis and stereoscopic observations, the crack was found to be approximately mode III type, and the plane of the plastic zone was identified as (111). The crack geometry was very similar to that observed in metals of low stacking fault energy, namely, stainless steel and copper. The second type of plastic zone observed was not in the form of a thin ribbon; that is, the dislocations in the plastic zone were not split into partial dislocations. Since the dislocations were not split, they cross-slipped readily from the original slip plane and formed a broad plastic zone

Dual mobility cup reduces dislocation rate after arthroplasty for femoral neck fracture

Directory of Open Access Journals (Sweden)

Robertsson Otto

2010-08-01

Full Text Available Abstract Background Hip dislocation after arthroplasty for femoral neck fractures remains a serious complication. The aim of our study was to investigate the dislocation rate in acute femoral neck fracture patients operated with a posterior approach with cemented conventional or dual articulation acetabular components. Methods We compared the dislocation rate in 56 consecutive patients operated with conventional (single mobility cemented acetabular components to that in 42 consecutive patients operated with dual articulation acetabular components. All the patients were operated via posterior approach and were followed up to one year postoperatively. Results There were 8 dislocations in the 56 patients having conventional components as compared to no dislocations in those 42 having dual articulation components (p = 0.01. The groups were similar with respect to age and gender distribution. Conclusions We conclude that the use of a cemented dual articulation acetabular component significantly reduces the dislocation rates in femoral neck fracture patients operated via posterior approach.

Anterior Hip Dislocation in a Football Player: A Case Report

Directory of Open Access Journals (Sweden)

Alexander Schuh

2009-01-01

Full Text Available Hip dislocations during sporting activities represent only 2%–5% of all hip dislocations. Most hip dislocations in sports can be categorised as “less complicated traumatic hip dislocations” by the Stewart-Milford classification due to the fact that minimal force is involved. The incidence of avascular necrosis of the femoral head greatly increases if the time to reduction is more than six hours. We report the case of a 38-year-old football player who suffered hip dislocation while kicking the ball with the medial aspect of the right foot in an external rotated manner of the right hip. Closed reduction was performed within 2 hours; postoperative follow-up was uneventful. Six months later the patient is out of any complaints; there is no sign of AVN of the femoral head.

Edge dislocations as sinks for sub-nanometric radiation induced defects in α-iron

Science.gov (United States)

Anento, N.; Malerba, L.; Serra, A.

2018-01-01

The role of edge dislocations as sinks for small radiation induced defects in bcc-Fe is investigated by means of atomistic computer simulation. In this work we investigate by Molecular Statics (T = 0K) the interaction between an immobile dislocation line and defect clusters of small sizes invisible experimentally. The study highlights in particular the anisotropy of the interaction and distinguishes between absorbed and trapped defects. When the considered defect intersects the dislocation glide plane and the distance from the dislocation line to the defect is on the range between 2 nm and 4 nm, either total or partial absorption of the cluster takes place leading to the formation of jogs. Residual defects produced during partial absorption pin the dislocation. By the calculation of stress-strain curves we have assessed the strength of those residues as obstacles for the motion of the dislocation, which is reflected on the unpinning stresses and the binding energies obtained. When the defect is outside this range, but on planes close to the dislocation glide plane, instead of absorption we have observed a capture process. Finally, with a view to introducing explicitly in kinetic Monte Carlo models a sink with the shape of a dislocation line, we have summarized our findings on a table presenting the most relevant parameters, which define the interaction of the dislocation with the defects considered.

Dislocations and radiation damage in α-uranium

International Nuclear Information System (INIS)

Leteurtre, J.

1969-01-01

Dislocations in α-uranium were studied by electron microscopy. Electropolishing of thin foils was performed at low temperature (-110 deg. C) to prevent oxidation. Burgers vectors of twins dislocations are defined. Interactions between slip and twinning are studied from both experimental and theoretical point of view. Samples irradiated at several burn-up were examined. In order to explain our micrographic results, and also all information gathered in literature about radiation damage in α-uranium, a coherent model is propound for the fission particles effects. We analyse the influences of parameters: temperature, dislocation density, impurity content. The number of point defects created by one initial fission is determined for pure and annealed metal. The importance of the self-anneal which occurs immediately in each displacement spike, and the anneal due to a new fission on the damage resulting from a previous fission, are estimated. The focussing distance in [100] direction is found to be about 1000 Angstrom, at 4 deg. K. (author) [fr

Intermittent dislocation density fluctuations in crystal plasticity from a phase-field crystal model

DEFF Research Database (Denmark)

Tarp, Jens M.; Angheluta, Luiza; Mathiesen, Joachim

2014-01-01

Plastic deformation mediated by collective dislocation dynamics is investigated in the two-dimensional phase-field crystal model of sheared single crystals. We find that intermittent fluctuations in the dislocation population number accompany bursts in the plastic strain-rate fluctuations...... propose a simple stochastic model of dislocation reaction kinetics that is able to capture these statistical properties of the dislocation density fluctuations as a function of shear rate....

Complete dislocation of the ulnar nerve at the elbow: a protective effect against neuropathy?

Science.gov (United States)

Leis, A Arturo; Smith, Benn E; Kosiorek, Heidi E; Omejec, Gregor; Podnar, Simon

2017-08-01

Recurrent complete ulnar nerve dislocation has been perceived as a risk factor for development of ulnar neuropathy at the elbow (UNE). However, the role of dislocation in the pathogenesis of UNE remains uncertain. We studied 133 patients with complete ulnar nerve dislocation to determine whether this condition is a risk factor for UNE. In all, the nerve was palpated as it rolled over the medial epicondyle during elbow flexion. Of 56 elbows with unilateral dislocation, UNE localized contralaterally in 17 elbows (30.4%) and ipsilaterally in 10 elbows (17.9%). Of 154 elbows with bilateral dislocation, 26 had UNE (16.9%). Complete dislocation decreased the odds of having UNE by 44% (odds ratio = 0.475; P =  0.028), and was associated with less severe UNE (P = 0.045). UNE occurs less frequently and is less severe on the side of complete dislocation. Complete dislocation may have a protective effect on the ulnar nerve. Muscle Nerve 56: 242-246, 2017. © 2016 Wiley Periodicals, Inc.

Behavior of misfit dislocations in semipolar InGaN/GaN grown by MOVPE

Energy Technology Data Exchange (ETDEWEB)

Kuwahara, Takaaki [Department of Applied Science for Electronics and Materials, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Kuwano, Noriyuki [Department of Applied Science for Electronics and Materials, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Art, Science and Technology Center for Cooperative Research, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Kurisu, Akihiko; Okada, Narihito; Tadatomo, Kazuyuki [Graduate School of Science and Engineering, Yamaguchi University, Ube, Yamaguchi 755-8611 (Japan)

2012-03-15

A microstructure in an InGaN/GaN layer grown at the semipolar direction was observed in detail by means of transmission electron microscopy (TEM) in order to analyze the behaviour of dislocations. A (11 anti 22) GaN layer was first deposited on a maskless r (1 anti 102)-plane patterned-substrate, and then an In{sub x} Ga{sub 1-x}N (x =0.10, 0.24) was overgrown to be about 1 {mu}m in thickness. Dislocations near the interface of InGaN/GaN are classified into several types: 1 Threading dislocations lying on (0001). 2. Misfit dislocations lying on the interface of InGaN/GaN. 3. Dislocations along [1 anti 100] at a certain distance from the interface. 4. Dislocations newly formed at the interface and developing along [11 anti 20] on (0001). 5. Partial dislocations accompanied with a stacking fault on (0001). It was found that the misfit dislocations are arrayed in pairs at the direction along [1 anti 100] on the interface of (11 anti 22). Burgers vector of the misfit dislocations was found to be B = <2 anti 1 anti 13>/3. In case of B = [ anti 1 anti 123]/3, they are edge dislocations. The densities of dislocations and stacking faults increase with the In-content in InGaN. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Managing dislocations of the hip, knee, and ankle in the emergency department

Science.gov (United States)

Arnold, Caylyne; Fayos, Zane; Bruner, David; Arnold, Dylan

2017-12-01

Dislocation of the major joints of the lower extremities--hip, knee, and ankle--can occur due to motor-vehicle crashes, falls, and sports injuries. Hip dislocations are the most common, and they require emergent management to prevent avascular necrosis of the femoral head. Knee dislocations are uncommon but potentially dangerous injuries that can result in amputation due to the potential for missed secondary injury, especially if they are reduced spontaneously. Isolated ankle dislocations are relatively rare, as most ankle dislocations involve an associated fracture. This review presents an algorithmic approach to management that ensures that pain relief, imaging, reduction, vascular monitoring, and emergent orthopedic consultation are carried out in a timely fashion. Copyright © 2017 EB Medicine. All rights reserved.

Quantitative analysis of screw dislocations in 6H-SiC single crystals

International Nuclear Information System (INIS)

Dudley, M.; Si, W.; Wang, S.

1997-01-01

Screw dislocations along the [0001[ axis in 6H-SiC single crystals have been studied extensively by Synchrotron White-Beam X-ray Topography (SWBXT), Scanning Electron Microscopy (SEM), and Nomarski Optical Microscopy (NOM). Using SWBXT, the magnitude of the Burgers vector of screw dislocations has been determined by measuring the following four parameters: 1) the diameter of dislocation images in back-reflection topographs; 2) the width of bimodal dislocation images in transmission topographs; 3) the magnitude of the tilt of lattice planes on both sides of dislocation core in projection topographs; and 4) the magnitude of the tilt of lattice planes in section topographs. The four methods show good agreement. SEM results reveal that micropipes in the form of hollow tubes run through the crystal emerging as holes on the as-grown surface, with their diameters ranging from about 0.1 to a few micrometers. Correlation between topographic images and SEM micrographs shows that micropipes are screw dislocations with Burgers vector magnitudes from 2c to 7c (c is the lattice constant along the [0001[ axis). There is no empirical evidence that 1c dislocations have hollow cores. The Burgers vector magnitude of screw dislocations, b, and the diameter of associated micropipes, D, were fitted to Frank's prediction for hollow-core screw dislocations: D = μb 2 / 4π 2 γ, where μ is the shear modulus and γ is the specific surface energy. Statistical analysis of the relationship between D and b 2 shows that it is approximately linear, and the constant, γ / μ ranges from 1.1 x 10 -3 to 1.6 x 10 -3 nm

Prognostic factors after a traumatic hip dislocation. A long-term retrospective study.

Science.gov (United States)

Moreta, J; Foruria, X; Sánchez, A; Aguirre, U

Traumatic hip dislocations can have devastating complications such as osteoarthritis or osteonecrosis. The aim of this study was to identify the variables and prognostic factors associated with clinical and radiological outcome after a traumatic hip dislocation at long-term follow-up. A review was performed of all dislocations and fracture-dislocations of the hip from January 1999 to December 2012. A computed tomography scan was performed after reduction in all cases. The Harris Hip Score and modified Merle-d'Aubigné-Postel method were used for clinical evaluation and radiological assessment was performed according to the Thompson and Epstein classification. There were 30 cases in 29 patients with a mean follow-up of 11 years (range, 4-17). The great majority were simple dislocations (21; 70%) vs. complex dislocations (9; 30%). Closed reduction was performed in less than 6h in all except one case (29; 96.7%). All of the patients with simple dislocations had an excellent outcome without radiological signs of osteoarthritis at the end of the follow-up (P<.01). Overall, arthritic signs had developed in 4 patients (13.3%) and avascular necrosis was noted in 3 patients (10%). Five patients with intraarticular fragments were treated non-operatively, and 3 of them developed arthritic changes (P<.05). Our study suggests that complex dislocations are associated with poorer functional and radiological outcomes than simple dislocations. We also found a strong association between intraarticular fragments and osteoarthritis, so surgical fragment removal could be considered in these cases. Copyright © 2017 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

A complete absorption mechanism of stacking fault tetrahedron by screw dislocation in copper

International Nuclear Information System (INIS)

Fan, Haidong; Wang, Qingyuan

2013-01-01

It was frequently observed in experiments that stacking fault tetrahedron (SFT) can be completely absorbed by dislocation and generate defect-free channels in irradiated materials, but the mechanism is still open. In this paper, molecular dynamics (MD) was used to explore the dislocation mechanism of reaction between SFT and screw dislocation in copper. Our computational results reveal that, at high temperature, the SFT is completely absorbed by screw dislocation with the help of Lomer–Cottrell (LC) lock transforming into Lomer dislocation. This complete absorption mechanism is very helpful to understand the defect-free channels in irradiated materials

Emission of partial dislocations from triple junctions of grain boundaries in nanocrystalline materials

International Nuclear Information System (INIS)

Gutkin, M Yu; Ovid'ko, I A; Skiba, N V

2005-01-01

A theoretical model is suggested that describes emission of partial Shockley dislocations from triple junctions of grain boundaries (GBs) in deformed nanocrystalline materials. In the framework of the model, triple junctions accumulate dislocations due to GB sliding along adjacent GBs. The dislocation accumulation at triple junctions causes partial Shockley dislocations to be emitted from the dislocated triple junctions and thus accommodates GB sliding. Ranges of parameters (applied stress, grain size, etc) are calculated in which the emission events are energetically favourable in nanocrystalline Al, Cu and Ni. The model accounts for the corresponding experimental data reported in the literature

Simulation of dislocation glide in dilute Fe-Cu alloys

International Nuclear Information System (INIS)

Tapasa, K.; Bacon, D.J.; Osetsky, Yu.N.

2005-01-01

The effects on dislocation glide of the substitutional element copper in solution in α-iron are being investigated by computer simulation. In the first phase, the critical stress for a 1/2 {110} edge dislocation to overcome configurations of either a single or two nearest-neighbour solute atoms is simulated. Molecular statics and dynamics methods are used to simulate effects at temperature equal to and greater than 0K, respectively. Single copper atoms and nearest-neighbour pairs in the first atomic plane below the glide plane give the strongest barrier to dislocation glide, in partial agreement with elasticity theory. In addition to temperature, obstacle-spacing effects are considered

Effect of ion irradiation-produced defects on the mobility of dislocations in 304 stainless steel

International Nuclear Information System (INIS)

Briceno, M.; Fenske, J.; Dadfarnia, M.; Sofronis, P.; Robertson, I.M.

2011-01-01

The impact of heavy-ion produced defects on the mobility of dislocations, dislocation sources and newly generated dislocations in 304 stainless steel are discovered by performing irradiation and deformation experiments in real time in the transmission electron microscope. Dislocations mobile prior to the irradiation are effectively locked in position by the irradiation, but the irradiation has no discernible impact on the ability of a source to generate dislocations. The motion and mobility of a dislocation is altered by the irradiation. It becomes irregular and jerky and the mobility increases slowly with time as the radiation-produced defects are annihilated locally. Channels created by dislocations ejected from grain boundary dislocation sources were found to have a natural width, as the emission sites within the boundary were spaced close together. Finally, the distribution of dislocations, basically, an inverse dislocation pile-up, within a cleared channel suggests a new mechanism for generating high local levels of stress at grain boundaries. The impact of these observations on the mechanical properties of irradiated materials is discussed briefly.

Effect of ion irradiation-produced defects on the mobility of dislocations in 304 stainless steel

Energy Technology Data Exchange (ETDEWEB)

Briceno, M.; Fenske, J. [Department of Materials Science and Engineering, University of Illinois, Urbana, IL 61801 (United States); Dadfarnia, M.; Sofronis, P. [Department of Mechanical Science and Engineering, University of Illinois, Urbana, IL 61801 (United States); Robertson, I.M., E-mail: ian.robertson@tcd.ie [Department of Materials Science and Engineering, University of Illinois, Urbana, IL 61801 (United States)

2011-02-01

The impact of heavy-ion produced defects on the mobility of dislocations, dislocation sources and newly generated dislocations in 304 stainless steel are discovered by performing irradiation and deformation experiments in real time in the transmission electron microscope. Dislocations mobile prior to the irradiation are effectively locked in position by the irradiation, but the irradiation has no discernible impact on the ability of a source to generate dislocations. The motion and mobility of a dislocation is altered by the irradiation. It becomes irregular and jerky and the mobility increases slowly with time as the radiation-produced defects are annihilated locally. Channels created by dislocations ejected from grain boundary dislocation sources were found to have a natural width, as the emission sites within the boundary were spaced close together. Finally, the distribution of dislocations, basically, an inverse dislocation pile-up, within a cleared channel suggests a new mechanism for generating high local levels of stress at grain boundaries. The impact of these observations on the mechanical properties of irradiated materials is discussed briefly.

A mutation in the nucleoporin-107 gene causes XX gonadal dysgenesis.

Science.gov (United States)

Weinberg-Shukron, Ariella; Renbaum, Paul; Kalifa, Rachel; Zeligson, Sharon; Ben-Neriah, Ziva; Dreifuss, Amatzia; Abu-Rayyan, Amal; Maatuk, Noa; Fardian, Nilly; Rekler, Dina; Kanaan, Moien; Samson, Abraham O; Levy-Lahad, Ephrat; Gerlitz, Offer; Zangen, David

2015-11-02

Ovarian development and maintenance are poorly understood; however, diseases that affect these processes can offer insights into the underlying mechanisms. XX female gonadal dysgenesis (XX-GD) is a rare, genetically heterogeneous disorder that is characterized by underdeveloped, dysfunctional ovaries, with subsequent lack of spontaneous pubertal development, primary amenorrhea, uterine hypoplasia, and hypergonadotropic hypogonadism. Here, we report an extended consanguineous family of Palestinian origin, in which 4 females exhibited XX-GD. Using homozygosity mapping and whole-exome sequencing, we identified a recessive missense mutation in nucleoporin-107 (NUP107, c.1339G>A, p.D447N). This mutation segregated with the XX-GD phenotype and was not present in available databases or in 150 healthy ethnically matched controls. NUP107 is a component of the nuclear pore complex, and the NUP107-associated protein SEH1 is required for oogenesis in Drosophila. In Drosophila, Nup107 knockdown in somatic gonadal cells resulted in female sterility, whereas males were fully fertile. Transgenic rescue of Drosophila females bearing the Nup107D364N mutation, which corresponds to the human NUP107 (p.D447N), resulted in almost complete sterility, with a marked reduction in progeny, morphologically aberrant eggshells, and disintegrating egg chambers, indicating defective oogenesis. These results indicate a pivotal role for NUP107 in ovarian development and suggest that nucleoporin defects may play a role in milder and more common conditions such as premature ovarian failure.

Atomic-scale structure of dislocations revealed by scanning tunneling microscopy and molecular dynamics

DEFF Research Database (Denmark)

Christiansen, Jesper; Morgenstern, K.; Schiøtz, Jakob

2002-01-01

The intersection between dislocations and a Ag(111) surface has been studied using an interplay of scanning tunneling microscopy (STM) and molecular dynamics. Whereas the STM provides atomically resolved information about the surface structure and Burgers vectors of the dislocations, the simulati......The intersection between dislocations and a Ag(111) surface has been studied using an interplay of scanning tunneling microscopy (STM) and molecular dynamics. Whereas the STM provides atomically resolved information about the surface structure and Burgers vectors of the dislocations......, the simulations can be used to determine dislocation structure and orientation in the near-surface region. In a similar way, the subsurface structure of other extended defects can be studied. The simulations show dislocations to reorient the partials in the surface region leading to an increased splitting width...

Slip systems, dislocation boundaries and lattice rotations in deformed metals

DEFF Research Database (Denmark)

Winther, Grethe

2009-01-01

Metals are polycrystals and consist of grains, which are subdivided on a finer scale upon plastic deformation due to formation of dislocation boundaries. The crystallographic alignment of planar dislocation boundaries in face centred cubic metals, like aluminium and copper, deformed to moderate...... of the mechanical anisotropy of rolled sheets. The rotation of the crystallographic lattice in each grain during deformation also exhibits grain orientation dependence, originating from the slip systems. A combined analysis of dislocation boundaries and lattice rotations concludes that the two phenomena are coupled...

Surgical treatment of acromioclavicular dislocation using the endobutton.

Science.gov (United States)

Teodoro, Renato Loureiro; Nishimi, Alexandre Yukio; Pascarelli, Luciano; Bongiovanni, Roberto Rangel; Velasco, Marcelo Andreotti Perez; Dobashi, Eiffel Tsuyoshi

2017-01-01

To evaluate the clinical and radiographic results of 23 patients diagnosed with acute type III acromioclavicular dislocation treated with the Endobutton. Twenty-three patients with a diagnosis of type III acromioclavicular dislocation were treated surgically. Twenty-one patients were male (91.3%) and 2 (8.7%) were female. The dominant side was affected in 15 patients (65.21%) and the non-dominant side in 8 patients (34.79%). All patients were operated on by the same surgical team within 4 weeks of the trauma. According to the UCLA score, 14 patients (60.86%) presented excellent results, 7 patients (30.43%) had good results and 2 patients (8.69%) had regular results. The technique was effective in treating acute type III dislocations with a high degree of patient satisfaction. Level of Evidence IV, Case Series.

Determination of dislocation density in Zr-2.5Nb pressure tubes by x-ray

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Suk; Isaenkova, Perlovich; Cheong, Y. M.; Kim, S. S.; Yim, K. S.; Kwon, Sang Chul

2000-11-01

For X-ray determination of the dislocation density in CANDU Zr-2.5%Nb pressure tubes, a program was developed, using the Fourier analysis of X-ray line profiles and calculation of dislocation density by values of the coherent block size and the lattice distortion. The coincidence of obtained values of c- and a-dislocations with those, determined by the X-ray method for the same tube in AECL, was assumed to be the main criterion of validity of the developed program. The final variant of the program allowed to attain a rather close coincidence of calculated dislocation densities with results of AECL. The dislocation density was determined in all the zirconium grains with different orientations based on the texture of the stree-relieved CANDU tube. The complete distribution of c-dislocation density in -Zr grains depecding on their crystallographic orientations was constructed. The distribution of a-dislocation density within the texture maximum at L-direction, containing prismatic axes of all grains, was constructed as well. The analysis of obtained distributions testifies that -Zr grains of the stree-relieved CANDU tube significantly differ in their dislocation densities. Plotted diagrams of correlation between the dislocation density and the pole density allow to estimate the actual connection between texture and dislocation distribution in the studied tube. The distributions of volume fractions of all the zirconium grains depending on their dislocation density were calculated both for c- and a-dislocations. The distributions characterizes quantitatively the inhomogeneity of substructure conditions in the stress-relieved CANDU tube. the optimal procedure for determination of Nb content in {beta}-phases of CANDU Zr-2.5%Nb pressure tubes was also established.

Toward interplay between substructure evolution, dislocation configuration, and yield strength in a microalloyed steel

International Nuclear Information System (INIS)

Venkatsurya, P.K.C.; Misra, R.D.K.; Mulholland, M.D.; Manohar, M.; Hartmann, J.E.

2014-01-01

We focus our attention here on the directional dependence of yield strength in high strength microalloyed steel using transmission electron microscopy and x-ray diffraction. The primary objective is to study the interplay between substructural evolution, notably cell size, dense dislocation walls (DDWs), dislocation tangle zones (DTZs), lamellar boundaries, crystallographic texture, and yield strength. The study elucidates for the first time the strong impact of thermo-mechanical deformation-induced dislocation and lamellar structures, which are likely to modify the slip pattern, leading to directional dependence of yield strength. Majority of the dislocations tend to pile along the {110} slip planes as dense dislocation walls. At low strains, grains are first divided into cell blocks that are nearly dislocation-free. At higher strains and with progress in thermo-mechanical processing dislocation tangled zones and lamellar boundaries develop. It is hypothesized that the differences in dislocation configurations, dislocations cells and cell blocks, and lamellar boundaries synergistically contribute to directional dependence of the yield strength in the high strength ferrous alloy. The presumption is envisaged on the basis of observations that the microstructural constituents were similar in the entire plane of the hot rolled strip and the crystallographic texture was weak

A modified surgical technique for reconstruction of an acute acromioclavicular joint dislocation

OpenAIRE

Marchie, Anthony; Kumar, Arun; Catre, Melanio

2009-01-01

We report a modified surgical technique for reconstruction of coracoclavicular and acromioclavicular ligaments after acute dislocation of acromioclavicular joint using suture anchors. We have repaired 3 consecutive type III acromioclavicular dislocations with good results. This technique is simple and safe and allows anatomical reconstruction of the ligaments in acute dislocations.

Non-Traumatic Anterior Dislocation of a Total Knee Replacement Associated with Neurovascular Injury

Science.gov (United States)

Aderinto, Joseph; Gross, Allan E; Rittenhouse, Bryan

2009-01-01

Prosthetic total knee replacements rarely dislocate. When dislocation does occur, it is usually in a posterior direction in association with a posterior stabilised, cruciate-sacrificing prosthesis. Neurovascular injury is unusual. In this report, we describe a case of anterior dislocation of a cruciate-retaining total knee replacement in a 67-year-old woman. The dislocation occurred in the absence of overt trauma and resulted in severe neurovascular injury. PMID:19686618

In situ TEM study on elastic interaction between a prismatic loop and a gliding dislocation

International Nuclear Information System (INIS)

Matsukawa, Yoshitaka; Liu, Grace S.

2012-01-01

In situ straining in a transmission electron microscope was performed in order to investigate dislocation interactions with a prismatic loop, which as a mobile obstacle is expected to be displaced by the strain-field of dislocation prior to physical contact. It was found that when a gliding dislocation approached a critical distance, the prismatic loop was certainly attracted to the dislocation. The captured loop disrupted the dislocation motion and was not dragged along with the mobile dislocation. Instead, the dislocation bypassed the loop via cross-slip to another slip plane with a resolved shear stress estimated to be 40% lower than that of the original plane.

Free energy change of a dislocation due to a Cottrell atmosphere

Science.gov (United States)

Sills, R. B.; Cai, W.

2018-06-01

The free energy reduction of a dislocation due to a Cottrell atmosphere of solutes is computed using a continuum model. We show that the free energy change is composed of near-core and far-field components. The far-field component can be computed analytically using the linearized theory of solid solutions. Near the core the linearized theory is inaccurate, and the near-core component must be computed numerically. The influence of interactions between solutes in neighbouring lattice sites is also examined using the continuum model. We show that this model is able to reproduce atomistic calculations of the nickel-hydrogen system, predicting hydride formation on dislocations. The formation of these hydrides leads to dramatic reductions in the free energy. Finally, the influence of the free energy change on a dislocation's line tension is examined by computing the equilibrium shape of a dislocation shear loop and the activation stress for a Frank-Read source using discrete dislocation dynamics.

Electron microscope investigation into dislocation structure of cast aluminium alloys

International Nuclear Information System (INIS)

Zolotorevskij, V.S.; Orelkina, T.A.; Istomin-Kastrovskij, V.V.

1978-01-01

By applying the diffraction electron microscopy method, the general specific features of the disclocation structure of cast binary alloys of aluminium with different additions were established. It is shown that in most alloys, when they undergo cooling in the process of crystallization at the rate of about 850 deg/min, the cellular dislocation structure is formed. It is shown that in all the alloys studied, the total density of dislocations of one order is about-10 9 cm -2 , which exceeds by 1 to 2 orders of magnitude the value which follows from the Tiller theory of concentration stresses. It has been experimentally established that the contribution of shrinkage and thermal stresses to the formation of a dislocation structure is rather insignificant; yet the dislocation density values calculated according to the size of dendritic cells and the medium angles of their disorientation are close to those determined by the electron-microscopic method. This is the basis for making a supposition that the greater part of the dislocations in castings are formed as a result of comparing dendritic branches with one another, which are disoriented in respect to each other

Dislocation-related trap levels in nitride-based light emitting diodes

Energy Technology Data Exchange (ETDEWEB)

Venturi, Giulia; Castaldini, Antonio; Cavallini, Anna [Department of Physics and Astronomy, University of Bologna, Viale Berti Pichat 6/2, Bologna 40127 (Italy); Meneghini, Matteo; Zanoni, Enrico [Department of Information Engineering, University of Padova, via Gradenigo 6/B, Padova 35131 (Italy); Zhu, Dandan; Humphreys, Colin [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom)

2014-05-26

Deep level transient spectroscopy was performed on InGaN/GaN multiple quantum well light emitting diodes (LEDs) in order to determine the effect of the dislocation density on the deep intragap electronic levels. The LEDs were grown by metalorganic vapor phase epitaxy on GaN templates with a high dislocation density of 8 × 10{sup 9} cm{sup −2} and a low dislocation density of 3 × 10{sup 8} cm{sup −2}. Three trapping levels for electrons were revealed, named A, A1, and B, with energies E{sub A} ≈ 0.04 eV, E{sub A1} ≈ 0.13 eV, and E{sub B} ≈ 0.54 eV, respectively. The trapping level A has a much higher concentration in the LEDs grown on the template with a high density of dislocations. The logarithmic dependence of the peak amplitude on the bias pulse width for traps A and A1 identifies the defects responsible for these traps as associated with linearly arranged defects. We conclude that traps A and A1 are dislocation-related intragap energy levels.

Dislocation-related trap levels in nitride-based light emitting diodes

International Nuclear Information System (INIS)

Venturi, Giulia; Castaldini, Antonio; Cavallini, Anna; Meneghini, Matteo; Zanoni, Enrico; Zhu, Dandan; Humphreys, Colin

2014-01-01

Deep level transient spectroscopy was performed on InGaN/GaN multiple quantum well light emitting diodes (LEDs) in order to determine the effect of the dislocation density on the deep intragap electronic levels. The LEDs were grown by metalorganic vapor phase epitaxy on GaN templates with a high dislocation density of 8 × 10 9 cm −2 and a low dislocation density of 3 × 10 8 cm −2 . Three trapping levels for electrons were revealed, named A, A1, and B, with energies E A  ≈ 0.04 eV, E A1  ≈ 0.13 eV, and E B  ≈ 0.54 eV, respectively. The trapping level A has a much higher concentration in the LEDs grown on the template with a high density of dislocations. The logarithmic dependence of the peak amplitude on the bias pulse width for traps A and A1 identifies the defects responsible for these traps as associated with linearly arranged defects. We conclude that traps A and A1 are dislocation-related intragap energy levels.

Analytical X-ray line profile analysis based upon correlated dislocations

International Nuclear Information System (INIS)

Rao, S.; Houska, C.R.

1988-01-01

Recent advances describing X-ray line profiles analytically, in terms of a minimum number of parameters, are related to a theory based upon correlated dislocations. It is shown that a multiple convolution approach, based upon the Warren-Averbach (W-A) analysis, leads to a form that closely approximates the strain coefficient obtained by Krivoglaz, Martynenko and Ryaboshopka. This connection enables one to determine the dislocation density and the ratio of the correlation range parameter to the mean particle size. These two results are obtained most accurately from previous analytical approaches which make use of a statistical least-squares analysis. The W-A Fourier-series approach provides redundant information and does not focus on the critical parameters that relate to dislocation theory. Results so far are limited to b.c.c. materials. Results for cold-worked W, Mo, Nb, Cr and V are compared with highly imperfect sputtered films of Mo. A major difference is relatable to higher correlation of dislocations in cold-worked metals than is found in sputtered films deposited at low temperatures. However, in each case, the dislocation density is high. (orig.)

Atlanto-Occipital Rotatory Dislocation: A Case Report and Systematic Review.

Science.gov (United States)

Robles, Luis A; Mundis, Greg M; Cuevas-Solórzano, Abel

2018-02-01

Atlanto-occipital rotatory dislocation (AORD) has rarely been reported in the literature; for this reason, the clinicoradiologic characteristics of this injury are not well described. We describe the case of a 67-year-old man who sustained a cervical spine trauma. He reported only neck pain and was neurologically intact. A computed tomography scan showed a rotatory displacement of the atlanto-occipital joints associated with a widened condylar-C1 interval; in addition, magnetic resonance imaging showed injuries to the stabilizing ligaments of this area. A systematic literature review was also performed to identify previous cases of patients with AORD. The patient was treated with craniocervical fixation from occipital to C1, achieving a good outcome. The literature review yielded 9 cases of patients with AORD. Compared with patients with atlanto-occipital dislocation, patients with rotatory dislocations have a less severe degree of displacement of the atlanto-occipital joints and better clinical outcome. Compared with previously classified atlanto-occipital dislocations, AORD is an independent and unique variation. AORD presents with different biomechanical, clinicoradiologic, and prognostic characteristics and represents an important addition to the spectrum of atlanto-occipital dislocation injuries. Copyright © 2017 Elsevier Inc. All rights reserved.

A modified surgical technique for reconstruction of an acute acromioclavicular joint dislocation

Science.gov (United States)

Marchie, Anthony; Kumar, Arun; Catre, Melanio

2009-01-01

We report a modified surgical technique for reconstruction of coracoclavicular and acromioclavicular ligaments after acute dislocation of acromioclavicular joint using suture anchors. We have repaired 3 consecutive type III acromioclavicular dislocations with good results. This technique is simple and safe and allows anatomical reconstruction of the ligaments in acute dislocations. PMID:20671868

Core structure of screw dislocations in Fe from first-principles; Simulation ab initio des coeurs de dislocation vis dans le fer

Energy Technology Data Exchange (ETDEWEB)

Ventelon, L

2008-11-15

The various methods appropriate for the simulation of dislocations within first-principles calculations have been set up, improved and compared between them. They have been applied to study screw dislocations in body-centered cubic iron using the SIESTA code. A non-degenerate core structure is obtained; its detailed analysis reveals a dilatation effect. Taking it into account in an anisotropic elasticity model, allows explaining the cell-size dependence of the energetics, obtained within the dipole approach. The Peierls potential obtained in ab initio suggests that the metastable core configuration at halfway position in the Peierls barrier, predicted by empirical potential, does not exist. We show how to construct tri-periodic cells optimized to study kinked dislocations. Using empirical potential, we demonstrate the feasibility of ab initio calculations of Peierls stress and kink formation. (author)

Anisotropic Dislocation Line Energy and Crack Tip Dislocation Nucleation in (alpha)RDX

Science.gov (United States)

2013-11-01

Mitchell, R.L.; Knap, J.; Chung, P.W., Role of molecule flexibility on the nucleation of dislocations in molecular crystals. App. Phys. Lett. 2013...uniform stres , under-estimate of stressses (Get from S) Br=0; for i=1:3 Br=Br+sum(S(i,1:3)); end Br=1/Br; % Shear Modulus Gr=4/15*(S(1,1

Birth Defects Associated with Perturbations in Pre-implantation, Gastrulation & Axis Extension: from Conjoined Twinning to Caudal Dysgenesis

Science.gov (United States)

Ferrer-Vaquer, Anna; Hadjantonakis, Anna-Katerina

2012-01-01

Congenital malformations represent approximately 3 in 100 live births within the human population. Understanding their pathogenesis and ultimately formulating effective treatments is underpinned by knowledge of the events and factors that regulate normal embryonic development. Studies in model organisms, primarily in the mouse, the most prominent genetically tractable mammalian model, have equipped us with a rudimentary understanding of mammalian development from early lineage commitment to morphogenetic processes. In this way information provided by studies in the mouse can, in some cases, be used to draw parallels with other mammals, including human. Here we provide an overview of our current understanding of the general sequence of developmental events from early cell cleavages to gastrulation and axis extension occurring in human embryos. We will also review some of the rare birth defects occurring at these stages, in particular those resulting in conjoined twinning or caudal dysgenesis. PMID:24014416

Spatial organization of plastic deformation in single crystals with different structure of slip dislocation

Energy Technology Data Exchange (ETDEWEB)

Kunitsyna, T. S.; Teplyakova, L. A., E-mail: lat168@mail.ru; Koneva, N. A. [Tomsk State University of Architecture and Building, Tomsk, 634003 (Russian Federation); Poltaranin, M. A. [National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

2015-10-27

It is established that different structure of slip dislocation at the end of the linear hardening stage results in different distribution of dislocation charges in the volume of a single crystal. In the alloy with a near atomic order the slip of single dislocations leads to formation of planar structures—layers with the excess density of dislocations. In the alloy with long-range atomic order the slip of superdislocations brings the formation of the system of parallel rod-like charged dislocation linking.

Theory of electron-phonon-dislon interacting system—toward a quantized theory of dislocations

Science.gov (United States)

Li, Mingda; Tsurimaki, Yoichiro; Meng, Qingping; Andrejevic, Nina; Zhu, Yimei; Mahan, Gerald D.; Chen, Gang

2018-02-01

We provide a comprehensive theoretical framework to study how crystal dislocations influence the functional properties of materials, based on the idea of a quantized dislocation, namely a ‘dislon’. In contrast to previous work on dislons which focused on exotic phenomenology, here we focus on their theoretical structure and computational power. We first provide a pedagogical introduction that explains the necessity and benefits of taking the dislon approach and why the dislon Hamiltonian takes its current form. Then, we study the electron-dislocation and phonon-dislocation scattering problems using the dislon formalism. Both the effective electron and phonon theories are derived, from which the role of dislocations on electronic and phononic transport properties is computed. Compared with traditional dislocation scattering studies, which are intrinsically single-particle, low-order perturbation and classical quenched defect in nature, the dislon theory not only allows easy incorporation of quantum many-body effects such as electron correlation, electron-phonon interaction, and higher-order scattering events, but also allows proper consideration of the dislocation’s long-range strain field and dynamic aspects on equal footing for arbitrary types of straight-line dislocations. This means that instead of developing individual models for specific dislocation scattering problems, the dislon theory allows for the calculation of electronic structure and electrical transport, thermal transport, optical and superconducting properties, etc, under one unified theory. Furthermore, the dislon theory has another advantage over empirical models in that it requires no fitting parameters. The dislon theory could serve as a major computational tool to understand the role of dislocations on multiple materials’ functional properties at an unprecedented level of clarity, and may have wide applications in dislocated energy materials.

Screening for congenital dislocation of the hip

International Nuclear Information System (INIS)

Fendel, H.

1987-01-01

Although the prevalence of (idiopathic) congenital dislocation of the hip (CDH) within the Member States of the European Community is not exactly known, it must be considered as a major problem of public health care and protection. By assessment of available data one can assume that between 1 and 2% of all newborns have dislocation or instability of one or both hips. There is a female predominance of 4:1 and some risk factors are known. The reasons of a higher prevalence in some areas are not yet well understood. Most of instable hips will spontaneously become stable within the first days or weeks of life. However, a considerable number of infants (less than 1%) will remain with instable hips which may dislocate. Dislocation either present at birth or as a result of persistent instability leads to subsequent hip deformation. This is a serious event for each affected individual, and is a heavy load on health care and social costs for the public. Treatment of CDH is easy and usually effective when started early, i.e. before the fourth month of life. The earlier treatment is started the easier, shorter, safer and less expensive it is and its impairment on child development and mother-child interaction can be held to a minimum. Screening for CDH is therefore the most important part of health protection in early infancy. However, this paper concludes that neither sonography nor X-ray examinations are appropriate for CDH screening

Analysis of dislocation loops by means of large-angle convergent beam electron diffraction

International Nuclear Information System (INIS)

Jaeger, Ch; Spiecker, E; Morniroli, J P; Jaeger, W

2002-01-01

Diffusion-induced dislocation loops in GaP and GaAs were analysed by means of large-angle convergent beam electron diffraction (LACBED) and conventional contrast methods of transmission electron microscopy. It is demonstrated that LACBED is perfectly suited for use in analysing dislocation loops. The method combines analyses of the dislocation-induced splitting of Bragg lines in a LACBED pattern for the determination of the Burgers vector with analyses of the loop contrast behaviour in transmission electron microscopy bright-field images during tilt experiments, from which the habit plane of the dislocation loop is determined. Perfect dislocation loops formed by condensation of interstitial atoms or vacancies were found, depending on the diffusion conditions. The loops possess {110}-habit planes and Burgers vectors parallel to (110). The LACBED method findings are compared with results of contrast analyses based on the so-called 'inside-outside' contrast of dislocation loops. Advantages of the LACBED method consist in the possibility of determining the complete Burgers vector of the dislocation loops and of an unambiguous and fast loop type analysis

Traumatic Posterior Atlantoaxial Dislocation Without Associated Fracture but With Neurological Deficit

Science.gov (United States)

Xu, Yong; Li, Feng; Guan, Hanfeng; Xiong, Wei

2015-01-01

Abstract Posterior atlantoaxial dislocation without odontoid fracture is extremely rare and often results in fatal spinal cord injury. According to the reported literature, all cases presented mild or no neurologic deficit, with no definite relation to upper spinal cord injury. Little is reported about traumatic posterior atlantoaxial dislocation, with incomplete quadriplegia associated with a spinal cord injury. We present a case of posterior atlantoaxial dislocation without associated fracture, but with quadriplegia, and accompanying epidural hematoma and subarachnoid hemorrhage. The patient underwent gentle traction in the neutral position until repeated cranial computed tomography revealed no progression of the epidural hematoma. Thereafter, the atlantoaxial dislocation was reduced by using partial odontoidectomy via a video-assisted transcervical approach and maintained with posterior polyaxial screw-rod constructs and an autograft. Neurological status improved immediately after surgery, and the patient recovered completely after 1 year. Posterior fusion followed by closed reduction is the superior strategy for posterior atlantoaxial dislocation without odontoid fracture, according to literature. But for cases with severe neurological deficit, open reduction may be the safest choice to avoid the lethal complication of overdistraction of the spinal cord. Also, open reduction and posterior srew-rod fixation are safe and convenient strategies in dealing with traumatic posterior atlantoaxial dislocation patients with neurological deficit. PMID:26512572

Growth kinetics of dislocation loops in irradiated ceramic materials

International Nuclear Information System (INIS)

Ryazanov, A.I.; Kinoshita, C.

2002-01-01

Ceramic materials are expected to be applied in the future fusion reactor as radio frequency (RF) windows, toroidal insulating breaks and diagnostic probes. The radiation resistance of ceramic materials, degradation of the electrical properties and radiation induced conductivity of these materials under neutron irradiation are determined by the kinetics of the accumulation of point defects in the matrix and point defect cluster formation (dislocation loops, voids, etc.). Under irradiation, due to the ionization process, excitation of electronic subsystem and covalent type of interaction between atoms the point defects in ceramic materials are characterized by the charge state (e.g. an F + center, an oxygen vacancy with a single trapped electron) and the effective charge. For the investigation of radiation resistance of ceramic materials for future fusion applications it is very important to understand the physical mechanisms of formation and growth of dislocation loops and voids under irradiation taking into account in this system the effective charge of point defects. In the present paper the physical mechanisms of dislocation loop growth in ceramic material are investigated. For this aim a theoretical model is suggested for the description of the kinetics of point defect accumulation in the matrix taking into account the charge state of the point defects and the effect of an electric field on diffusion migration process of charged point defects. A self-consistent system of kinetic equations describing the generation of electrical fields near dislocation loops and diffusion migration of charged point defects in elastic and electrical fields is formulated. The solution of the kinetic equations allows to find the growth rate of dislocation loops in ceramic materials under irradiation taking into account the charge state of the point defects and the effect of electric and elastic stress fields near dislocation loop on the diffusion processes

Lateral subtalar dislocation : Case report and review of the literature

NARCIS (Netherlands)

Veltman, Ewout S; Steller, Ernst Ja; Wittich, Philippe; Keizer, Jort

2016-01-01

A case of complicated lateral subtalar dislocation is presented and the literature concerning this injury is reviewed. Subtalar joint dislocations are rare and often the result of a high-energy trauma. Complications include avascular necrosis of the talus, infection, posttraumatic osteoarthritis

Tailoring dislocation structures and mechanical properties of nanostructured metals produced by plastic deformation

DEFF Research Database (Denmark)

Huang, Xiaoxu

2009-01-01

The presence of a dislocation structure associated with low-angle dislocation boundaries and interior dislocations is a common and characteristic feature in nanostructured metals produced by plastic deformation, and plays an important role in determining both the strength and ductility...

Plastic deformation of crystals: analytical and computer simulation studies of dislocation glide

International Nuclear Information System (INIS)

Altintas, S.

1978-05-01

The plastic deformation of crystals is usually accomplished through the motion of dislocations. The glide of a dislocation is impelled by the applied stress and opposed by microstructural defects such as point defects, voids, precipitates and other dislocations. The planar glide of a dislocation through randomly distributed obstacles is considered. The objective of the present research work is to calculate the critical resolved shear stress (CRSS) for athermal glide and the velocity of the dislocation at finite temperature as a function of the applied stress and the nature and strength of the obstacles. Dislocation glide through mixtures of obstacles has been studied analytically and by computer simulation. Arrays containing two kinds of obstacles as well as square distribution of obstacle strengths are considered. The critical resolved shear stress for an array containing obstacles with a given distribution of strengths is calculated using the sum of the quadratic mean of the stresses for the individual obstacles and is found to be in good agreement with the computer simulation data. Computer simulation of dislocation glide through randomly distributed obstacles containing up to 10 6 obstacles show that the CRSS decreases as the size of the array increases and approaches a limiting value. Histograms of forces and of segment lengths are obtained and compared with theoretical predictions. Effects of array shape and boundary conditions on the dislocation glide are also studied. Analytical and computer simulation results are compared with experimental results obtained on precipitation-, irradiation-, forest-, and impurity cluster-hardening systems and are found to be in good agreement

Plastic deformation of crystals: analytical and computer simulation studies of dislocation glide

Energy Technology Data Exchange (ETDEWEB)

Altintas, S.

1978-05-01

The plastic deformation of crystals is usually accomplished through the motion of dislocations. The glide of a dislocation is impelled by the applied stress and opposed by microstructural defects such as point defects, voids, precipitates and other dislocations. The planar glide of a dislocation through randomly distributed obstacles is considered. The objective of the present research work is to calculate the critical resolved shear stress (CRSS) for athermal glide and the velocity of the dislocation at finite temperature as a function of the applied stress and the nature and strength of the obstacles. Dislocation glide through mixtures of obstacles has been studied analytically and by computer simulation. Arrays containing two kinds of obstacles as well as square distribution of obstacle strengths are considered. The critical resolved shear stress for an array containing obstacles with a given distribution of strengths is calculated using the sum of the quadratic mean of the stresses for the individual obstacles and is found to be in good agreement with the computer simulation data. Computer simulation of dislocation glide through randomly distributed obstacles containing up to 10/sup 6/ obstacles show that the CRSS decreases as the size of the array increases and approaches a limiting value. Histograms of forces and of segment lengths are obtained and compared with theoretical predictions. Effects of array shape and boundary conditions on the dislocation glide are also studied. Analytical and computer simulation results are compared with experimental results obtained on precipitation-, irradiation-, forest-, and impurity cluster-hardening systems and are found to be in good agreement.

Management of neglected traumatic posterior dislocations of the hip ...

African Journals Online (AJOL)

Within a period of six months, three men were admitted following falls which had occurred more than one week previously. They had all sustained minor trauma but directly after the injury they were unable to bear weight on the affected limb. All three had Grade 1 posterior dislocations of the hip. Although the dislocation had ...

The formation of super-dislocation/micropipe complexes in 6H-SiC

Energy Technology Data Exchange (ETDEWEB)

Giocondi, J.; Rohrer, G.S.; Skowronski, M. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Materials Science and Engineering; Balakrishna, V.; Augustine, G.; Hobgood, H.McD.; Hopkins, R.H. [Northrop Grumman Science and Technology Center, Pittsburgh PA (United States)

1998-06-01

Atomic force microscope images of surface/micropipe intersections on the (0001) growth surface of a 6H-SiC single crystal grown by the physical vapor transport method indicate that micropipes are associated with super-dislocations and that micron-scale deposits of a heterogeneous phase are frequently found in the vicinity of the defect. Based on our observations, we propose a model for the formation of super-dislocation/micropipe complexes that involves the coalescence of unit screw dislocations. The unit dislocations are forced together as large steps grow around heterogeneous material on the surface. (orig.) 5 refs.

Long-standing temporomandibular joint dislocation: A rare experience

Directory of Open Access Journals (Sweden)

Kapil Malik

2017-01-01

Full Text Available Long-standing temporomandibular joint (TMJ dislocations persist for more than a month are most challenging to treat. The management of such condition varies widely, from closed reduction to complicated surgical procedures. The choice of an appropriate methodology is questionable. At present, there are no standard rules or conventions for the ideal strategy in different circumstances. This paper attempts to present the experience of managing two cases of long-standing TMJ dislocations.

Arthroscopic treatment of acromioclavicular dislocation

Directory of Open Access Journals (Sweden)

Mihai T. Gavrilă

2017-11-01

Full Text Available A thorough understanding of biomechanical function of both acromioclavicular (AC and coracoclavicular (CC ligaments, stimulated surgeons to repair high-grade AC dislocation using arthroscopic technique. This technique necessitates a clear understanding of shoulder anatomy, especially of the structures in proximity to the clavicle and coracoid process and experiences in arthroscopic surgery. The follow case describes an arthroscopic technique used to treat AC dislocation in young man 30 years old, who suffered an injury at right shoulder. Results were similar to those obtained using open surgery and this encouraged us to continue utilization of this method. As a conclusion, arthroscopic treatment of AC separation is one of the best options as surgical treatment. Early results suggested that immediate anatomic reduction of an acute AC separation usually provides satisfactory clinical results at intermediate-term follow-up.

Cortical tremor: a variant of cortical reflex myoclonus.

Science.gov (United States)

Ikeda, A; Kakigi, R; Funai, N; Neshige, R; Kuroda, Y; Shibasaki, H

1990-10-01

Two patients with action tremor that was thought to originate in the cerebral cortex showed fine shivering-like finger twitching provoked mainly by action and posture. Surface EMG showed relatively rhythmic discharge at a rate of about 9 Hz, which resembled essential tremor. However, electrophysiologic studies revealed giant somatosensory evoked potentials (SEPs) with enhanced long-loop reflex and premovement cortical spike by the jerk-locked averaging method. Treatment with beta-blocker showed no effect, but anticonvulsants such as clonazepam, valproate, and primidone were effective to suppress the tremor and the amplitude of SEPs. We call this involuntary movement "cortical tremor," which is in fact a variant of cortical reflex myoclonus.

Density of bunched threading dislocations in epitaxial GaN layers as determined using X-ray diffraction

Science.gov (United States)

Barchuk, M.; Holý, V.; Rafaja, D.

2018-04-01

X-ray diffraction is one of the most popular experimental methods employed for determination of dislocation densities, as it can recognize both the strain fields and the local lattice rotations produced by dislocations. The main challenge of the quantitative analysis of the dislocation density is the formulation of a suitable microstructure model, which describes the dislocation arrangement and the effect of the interactions between the strain fields from neighboring dislocations reliably in order to be able to determine the dislocation densities precisely. The aim of this study is to prove the capability of X-ray diffraction and two computational methods, which are frequently used for quantification of the threading dislocation densities from X-ray diffraction measurements, in the special case of partially bunched threading dislocations. The first method is based on the analysis of the dislocation-controlled crystal mosaicity, and the other one on the analysis of diffuse X-ray scattering from threading dislocations. The complementarity of both methods is discussed. Furthermore, it is shown how the complementarity of these methods can be used to improve the results of the quantitative analysis of bunched and thus inhomogeneously distributed threading dislocations and to get a better insight into the dislocation arrangement.

Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum

International Nuclear Information System (INIS)

Wang, S.; Wang, M.P.; Chen, C.; Xiao, Z.; Jia, Y.L.; Li, Z.; Wang, Z.X.

2014-01-01

The orientation dependence of the deformation microstructure has been investigated in commercial pure molybdenum. After deformation, the dislocation boundaries of compressed molybdenum can be classified, similar to that in face-centered cubic metals, into three types: dislocation cells (Type 2), and extended planar boundaries parallel to (Type 1) or not parallel to (Type 3) a (110) trace. However, it shows a reciprocal relationship between face-centered cubic metals and body-centered cubic metals on the orientation dependence of the deformation microstructure. The higher the strain, the finer the microstructure is and the smaller the inclination angle between extended planar boundaries and the compression axis is. - Highlights: • A reciprocal relationship between FCC metals and BCC metals is confirmed. • The dislocation boundaries can be classified into three types in compressed Mo. • The dislocation characteristic of different dislocation boundaries is different

Impact of Various Charge States of Hydrogen on Passivation of Dislocation in Silicon

Science.gov (United States)

Song, Lihui; Lou, Jingjing; Fu, Jiayi; Ji, Zhenguo

2018-03-01

Dislocation, one of typical crystallographic defects in silicon, is detrimental to the minority carrier lifetime of silicon wafer. Hydrogen passivation is able to reduce the recombination activity of dislocation, however, the passivation efficacy is strongly dependent on the experimental conditions. In this paper, a model based on the theory of hydrogen charge state control is proposed to explain the passivation efficacy of dislocation correlated to the peak temperature of thermal annealing and illumination intensity. Experimental results support the prediction of the model that a mix of positively charged hydrogen and negatively charged hydrogen at certain ratio can maximise the passivation efficacy of dislocation, leading to a better power conversion efficiency of silicon solar cell with dislocation in it.

MANAGEMENT OF POSTERIOR DISLOCATED INTRAOCULAR LENSES IN A TERTIARY HOSPITAL

Directory of Open Access Journals (Sweden)

Shashidhar

2016-10-01

Full Text Available BACKGROUND The aim of this study was to assess and compare the visual outcome of different approaches in the management of dislocated PCIOL. MATERIALS AND METHODS 20 eyes of 20 patients who underwent 3PPPV/anterior vitrectomy to refixate or IOL exchange for dislocation or subluxation of PCIOL from 2012 to 2015. SFIOLs were implanted in 12 patients, IOL refixation was done in four patients and four were left aphakic. This is a retrospective study of 20 eyes of 20 patients with dislocated/subluxated PCIOLs in a tertiary hospital from 2012 to 2015. STATISTICAL ANALYSIS Paired t-test statistical method. RESULTS We retrospectively analysed hospital records of patients who had undergone three PPPV/anterior vitrectomy for posteriorly dislocated/subluxated IOLs 20 eyes of 20 patients were analysed. SFIOLs were implanted in 12 patients, IOL refixation was done in four patients and four were left aphakic. Postoperative BCVA of 6/12 or better was achieved in 66.67% in primary SFIOL, secondary SFIOL and IOL refixation groups. BCVA of <6/60 was seen in all patients left aphakic. Early and late complications were most in aphakic patients. IOL refixation procedure had minimum early and late complications. Subluxated PCIOLs do better than dislocated lens where a successful SFIOL was placed. CONCLUSION IOL refixation procedure has the least complication rate. Early complications of SFIOL management resolve with time. Thus, 3PPPV/anterior vitrectomy with SFIOL and IOL refixation procedures offer a novel approach towards visual rehabilitation of patients with subluxated or dislocated PCIOLs.

Small-scale dislocation plasticity in strontium titanate

Energy Technology Data Exchange (ETDEWEB)

Stukowski, Alexander; Javaid, Farhan; Durst, Karsten; Albe, Karsten [Technische Universitaet Darmstadt (Germany)

2016-07-01

Strontium titanate (STO) is an optically transparent perovskite oxide ceramic material. In contrast to other ceramics, single crystal STO plastically deforms under ambient condition, without showing a phase transition or early fracture. This remarkable ductility makes it a prime candidate for different technological applications. However, while the mechanical behavior of bulk STO has been studied extensively using uniaxial compression testing techniques, little is known about the local, small-scale behavior and the details of dislocation-based nanoplasticity in this perovskite material. In this contribution we compare results obtained from new nanoindentation experiments and corresponding large-scale molecular dynamics simulations. The evolution of the plastic zone and dislocation structures that form underneath the indenter is investigated using etch-pit methods in experiments and a novel three-dimensional defect identification technique in atomistic computer models. The latter allows tracing the evolution of the complete dislocation line network as function of indentation depth, quantifying the activity of different slip systems, and correlating this information with the recorded load-displacement curves and hardness data.

Exploring the Limit of Dislocation Based Plasticity in Nanostructured Metals

DEFF Research Database (Denmark)

Hughes, D. A.; Hansen, Niels

2014-01-01

A twofold decrease to an unexplored scale of 5 nm was produced in Cu by applying a large sliding load in liquid nitrogen. Statistical and universal scaling analyses of deformation induced high angle boundaries, dislocation boundaries, and individual dislocations observed by high resolution electron...

Discrete dislocation plasticity modeling of short cracks in single crystals

NARCIS (Netherlands)

Deshpande, VS; Needleman, A; Van der Giessen, E

2003-01-01

The mode-I crack growth behavior of geometrically similar edge-cracked single crystal specimens of varying size subject to both monotonic and cyclic axial loading is analyzed using discrete dislocation dynamics. Plastic deformation is modeled through the motion of edge dislocations in an elastic

A dislocation-based crystal plasticity framework for dynamic ductile failure of single crystals

Science.gov (United States)

Nguyen, Thao; Luscher, D. J.; Wilkerson, J. W.

2017-11-01

A framework for dislocation-based viscoplasticity and dynamic ductile failure has been developed to model high strain rate deformation and damage in single crystals. The rate-dependence of the crystal plasticity formulation is based on the physics of relativistic dislocation kinetics suited for extremely high strain rates. The damage evolution is based on the dynamics of void growth, which are governed by both micro-inertia as well as dislocation kinetics and dislocation substructure evolution. An averaging scheme is proposed in order to approximate the evolution of the dislocation substructure in both the macroscale as well as its spatial distribution at the microscale. Additionally, a concept of a single equivalent dislocation density that effectively captures the collective influence of dislocation density on all active slip systems is proposed here. Together, these concepts and approximations enable the use of semi-analytic solutions for void growth dynamics developed in (Wilkerson and Ramesh, 2014), which greatly reduce the computational overhead that would otherwise be required. The resulting homogenized framework has been implemented into a commercially available finite element package, and a validation study against a suite of direct numerical simulations was carried out.

Self-organized pattern formation of biomolecules at silicon surfaces: Intended application of a dislocation network

International Nuclear Information System (INIS)

Kittler, M.; Yu, X.; Vyvenko, O.F.; Birkholz, M.; Seifert, W.; Reiche, M.; Wilhelm, T.; Arguirov, T.; Wolff, A.; Fritzsche, W.; Seibt, M.

2006-01-01

Defined placement of biomolecules at Si surfaces is a precondition for a successful combination of Si electronics with biological applications. We aim to realize this by Coulomb interaction of biomolecules with dislocations in Si. The dislocations form charged lines and they will be surrounded with a space charge region being connected with an electric field. The electric stray field in a solution of biomolecules, caused by dislocations located close to the Si surface, was estimated to yield values up to few kVcm -1 . A regular dislocation network can be formed by wafer direct bonding at the interface between the bonded wafers in case of misorientation. The adjustment of misorientation allows the variation of the distance between dislocations in a range from 10 nm to a few μm. This is appropriate for nanobiotechnology dealing with protein or DNA molecules with sizes in the nm and lower μm range. Actually, we achieved a distance between the dislocations of 10-20 nm. Also the existence of a distinct electric field formed by the dislocation network was demonstrated by the technique of the electron-beam-induced current (EBIC). Because of the relatively short range of the field, the dislocations have to be placed close to the surface. We positioned the dislocation network in an interface being 200 nm parallel to the Si surface by layer transfer techniques using hydrogen implantation and bonding. Based on EBIC and luminescence data we postulate a barrier of the dislocations at the as bonded interface < 100 meV. We plan to dope the dislocations with metal atoms to increase the electric field. We demonstrated that regular periodic dislocation networks close to the Si surface formed by bonding are realistic candidates for self-organized placing of biomolecules. Experiments are underway to test whether biomolecules decorate the pattern of the dislocation lines

Risk Factors for Migration, Fracture, and Dislocation of Pancreatic Stents

Directory of Open Access Journals (Sweden)

Yoshiaki Kawaguchi

2015-01-01

Full Text Available Aim. To analyze the risk factors for pancreatic stent migration, dislocation, and fracture in chronic pancreatitis patients with pancreatic strictures. Materials and Methods. Endoscopic stent placements (total 386 times were performed in 99 chronic pancreatitis patients with pancreatic duct stenosis at our institution between April 2006 and June 2014. We retrospectively examined the frequency of stent migration, dislocation, and fracture and analyzed the patient factors and stent factors. We also investigated the retrieval methods for migrated and fractured stents and their success rates. Results. The frequencies of stent migration, dislocation, and fracture were 1.5% (5/396, 0.8% (3/396, and 1.2% (4/396, respectively. No significant differences in the rates of migration, dislocation, or fracture were noted on the patient factors (etiology, cases undergoing endoscopic pancreatic sphincterotomy, location of pancreatic duct stenosis, existence of pancreatic stone, and approach from the main or minor papilla and stent factors (duration of stent placement, numbers of stent placements, stent shape, diameter, and length. Stent retrieval was successful in all cases of migration. In cases of fractured stents, retrieval was successful in 2 of 4 cases. Conclusion. Stent migration, fracture, and dislocation are relatively rare, but possible complications. A good understanding of retrieval techniques is necessary.

Motion of 1/3<111> dislocations on Σ3 (112) twin boundaries in nanotwinned copper

Energy Technology Data Exchange (ETDEWEB)

Lu, N.; Du, K., E-mail: kuidu@imr.ac.cn [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Beijing National Center for Electron Microscopy, Tsinghua University, Beijing 100084 (China); Lu, L.; Ye, H. Q. [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China)

2014-01-14

The atomic structure of Σ3 (112) ITBs in nanotwinned Cu is investigated by using aberration-corrected high resolution transmission electron microscopy (HRTEM) and in situ HRTEM observations. The Σ3 (112) ITBs are consisted of periodically repeated three partial dislocations. The in situ HRTEM results show that 1/3[111] partial dislocation moves on the Σ3 (112) incoherent twin boundary (ITB), which was accompanied by a migration of the ITB. A dislocation reaction mechanism is proposed for the motion of 1/3[111] Frank partial dislocation, in which the 1/3[111] partial dislocation exchanges its position with twin boundary dislocations in sequence. In this way, the 1/3[111] dislocation can move on the incoherent twin boundary in metals with low stacking fault energy. Meanwhile, the ITB will migrate in its normal direction accordingly. These results provide insight into the reaction mechanism of 1/3[111] dislocations and ITBs and the associated migration of ITBs.

Analysis of dislocation loops by means of large-angle convergent beam electron diffraction

CERN Document Server

Jäger, C; Morniroli, J P; Jäger, W

2002-01-01

Diffusion-induced dislocation loops in GaP and GaAs were analysed by means of large-angle convergent beam electron diffraction (LACBED) and conventional contrast methods of transmission electron microscopy. It is demonstrated that LACBED is perfectly suited for use in analysing dislocation loops. The method combines analyses of the dislocation-induced splitting of Bragg lines in a LACBED pattern for the determination of the Burgers vector with analyses of the loop contrast behaviour in transmission electron microscopy bright-field images during tilt experiments, from which the habit plane of the dislocation loop is determined. Perfect dislocation loops formed by condensation of interstitial atoms or vacancies were found, depending on the diffusion conditions. The loops possess left brace 110 right brace-habit planes and Burgers vectors parallel to (110). The LACBED method findings are compared with results of contrast analyses based on the so-called 'inside-outside' contrast of dislocation loops. Advantages o...

The Peierls stress of the moving [Formula: see text] screw dislocation in Ta.

Science.gov (United States)

Liu, Ruiping; Wang, Shaofeng; Wu, Xiaozhi

2009-08-26

The Peierls stress of the moving [Formula: see text] screw dislocation with a planar and non-dissociated core structure in Ta has been calculated. The elastic strain energy which is associated with the discrete effect of the lattice and ignored in classical Peierls-Nabarro (P-N) theory has been taken into account in calculating the Peierls stress, and it can make the Peierls stress become smaller. The Peierls stress we obtain is very close to the experimental data. As shown in the numerical calculations and atomistic simulations, the core structure of the screw dislocation undergoes significant changes under the explicit stress before the screw dislocation moves. Moreover, the mechanism of the screw dislocation is revealed by our results and the experimental data that the screw dislocation retracts its extension in three {110} planes and transforms its dissociated core structure into a planar configuration. Therefore, the core structure of the moving [Formula: see text] screw dislocation in Ta is proposed to be planar.

The Peierls stress of the moving 1/2{110} screw dislocation in Ta

International Nuclear Information System (INIS)

Liu Ruiping; Wang Shaofeng; Wu Xiaozhi

2009-01-01

The Peierls stress of the moving 1/2 {110} screw dislocation with a planar and non-dissociated core structure in Ta has been calculated. The elastic strain energy which is associated with the discrete effect of the lattice and ignored in classical Peierls-Nabarro (P-N) theory has been taken into account in calculating the Peierls stress, and it can make the Peierls stress become smaller. The Peierls stress we obtain is very close to the experimental data. As shown in the numerical calculations and atomistic simulations, the core structure of the screw dislocation undergoes significant changes under the explicit stress before the screw dislocation moves. Moreover, the mechanism of the screw dislocation is revealed by our results and the experimental data that the screw dislocation retracts its extension in three {110} planes and transforms its dissociated core structure into a planar configuration. Therefore, the core structure of the moving 1/2 {110} screw dislocation in Ta is proposed to be planar.

An Atypical Variant of Superolateral Dislocation of the Mandibular Condyle: A Case Report.

Science.gov (United States)

Malik, Kapil; Debnath, Subhas C; Adhyapok, Apurba K; Hazarika, Kriti

2017-10-01

Dislocation of the mandibular condyle from the glenoid fossa can occur in anterior, posterior, lateral, and superior directions. Posterior, lateral, and superior dislocations are rare. Superolateral dislocation is seldom encountered in clinical practice. It is generally associated with fracture of the anterior or contralateral side of the mandible. The occurrence of superolateral dislocation of the condyle hooked above the zygomatic arch with an associated fracture of the medial pole of the condyle is rare and has been reported only once in the literature. This report describes another case in which the patient had superolateral dislocation of the mandibular condyle with a fractured medial pole without any associated fracture of the anterior or contralateral side of the mandible. The condyle was hooked laterally above the zygomatic arch. Open reduction of the dislocated condyle was performed and a good outcome was obtained. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Dislocation processes in quasicrystals-Kink-pair formation control or jog-pair formation control

International Nuclear Information System (INIS)

Takeuchi, Shin

2005-01-01

A computer simulation of dislocation in a model quasiperiodic lattice indicates that the dislocation feels a large Peierls potential when oriented in particular directions. For a dislocation with a high Peierls potential, the glide velocity and the climb velocity of the dislocation can be described almost in parallel in terms of the kink-pair formation followed by kink motion and the jog-pair formation followed by jog motion, respectively. The activation enthalpy of the kink-pair formation is the sum of the kink-pair formation enthalpy and the atomic jump activation enthalpy, while the activation enthalpy of the jog-pair formation involves the jog-pair enthalpy and the self-diffusion enthalpy. Since the kink-pair energy can be considerably larger than the jog-pair energy, the climb velocity can be faster than the glide velocity, so that the plastic deformation of quasicrystals can be brought not by dislocation glide but by dislocation climb at high temperatures

K-wire and tension band wire fixation in treating sternoclavicular joint dislocation

Directory of Open Access Journals (Sweden)

CHEN Qing-yu

2011-02-01

Full Text Available 【Abstract】Objective: To evaluate the feasibility and therapeutic effect of treating sternoclavicular joint dislocation by K-wire and tension band wire fixation, and to improve the safety and stability of this technique. Methods: This study consisted of 9 cases, 6 males and 3 females with the mean age of 25 years (range, 9-62 years. The causes were traffic accident in 7 cases, falling in 1 case and fight in 1 case. The duration from injury to operation was 2 hours to 7 days. There were 5 left dislocations and 4 right dislocations; 8 anterior dislocations and 1 posterior dislocation, including one combined with left scapular fracture and one with left olecranon fracture. Open reduction and internal fixation using K-wires and tension band wires were performed to treat dislocations. Results: All patients were followed up for 6 to 24 months, 10 months on average. According to Rockwood’s rating scale on postoperative sternoclavicular joint, 8 cases achieved excellent outcomes with an average score of 13.88, and the rest case achieved a good outcome with the score of 12. Anatomical reduction was obtained in all cases. There were no such postoperative complications as severe infection, injury to blood vessel and nerve, failure of fixation, etc. Patients were all satisfied with the anatomical reduction and functional recovery. Conclusions: The technique of K-wire and tension band wire fixation is safe, simple, effective, less invasive and has been successfully used in orthopedic surgery. It is effective in treating sternoclavicular joint dislocation though it has some disadvantages. Key words: Sternoclavicular joint; Dislocations; Bone wires; Fracture fixation, internal

Transformation of slip dislocation in ä3 grain boundary

Czech Academy of Sciences Publication Activity Database

Gemperlová, Juliana; Jacques, A.; Gemperle, Antonín; Zárubová, Niva

2002-01-01

Roč. 10, - (2002), s. 51-57 ISSN 0927-7056 R&D Projects: GA ČR GA202/98/1281; GA ČR GA202/01/0670 Institutional research plan: CEZ:AV0Z1010914 Keywords : in situ TEM * slip dislocations * grain boundary * grain boundary dislocations * plasticity Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.767, year: 2002

Epitaxial strain relaxation by provoking edge dislocation dipoles

Science.gov (United States)

Soufi, A.; El-Hami, K.

2018-02-01

Thin solid films have been used in various devices and engineering systems such as rapid development of highly integrated electronic circuits, the use of surface coatings to protect structural materials in high temperature environments, and thin films are integral parts of many micro-electro-mechanical systems designed to serve as sensors, actuators. Among techniques of ultra-thin films deposition, the heteroepitaxial method becomes the most useful at nanoscale level to obtain performed materials in various applications areas. On the other hand, stresses that appeared during the elaboration of thin films could rise deformations and fractures in materials. The key solution to solve this problem at the nanoscale level is the nucleation of interface dislocations from free surfaces. By provoking edge dislocation dipoles we obtained a strain relaxation in thin films. Moreover, the dynamic of nucleation in edge dislocations from free lateral surfaces was also studied.

Proximal tibiofibular dislocation: a case report and review of literature

NARCIS (Netherlands)

Nieuwe Weme, R. A.; Somford, M. P.; Schepers, T.

2014-01-01

An isolated dislocation of the proximal tibiofibular joint is uncommon. The mechanism of this injury is usually sports related. We present a case where initial X-rays did not show the tibiofibular joint dislocation conclusively. It was diagnosed after comparative bilateral AP X-rays of the knees

Irradiation creep induced anisotropy in a/2 dislocation populations

International Nuclear Information System (INIS)

Gelles, D.S.

1984-05-01

The contribution of anisotropy in Burgers vector distribution to irradiation creep behavior has been largely ignored in irradiation creep models. However, findings on Frank loops suggest that it may be very important. Procedures are defined to identify the orientations of a/2 Burgers vectors for dislocations in face-centered cubic crystals. By means of these procedures the anisotropy in Burgers vector populations was determined for three Nimonic PE16 pressurized tube specimens irradiated under stress. Considerable anisotropy in Burgers vector population develops during irradiation creep. It is inferred that dislocation motion during irradiation creep is restricted primarily to a climb of a/2 dislocations on 100 planes. Effect of these results on irradiation creep modeling and deformation induced irradiation growth is considered

Simultaneous anterior and posterior dislocation of hips: a case report and review of literature

Directory of Open Access Journals (Sweden)

Gupta Vinay

2012-11-01

Full Text Available 【Abstract】The presence of anterior hip dislocation along with contralateral posterior hip dislocation in the ab-sence of other major traumas is a distinctly rare injury pattern. We report such a case, along with a review of previous cases. A 40-year-old male patient after motorcycle skidding had posterior dislocation of the left hip and anterior dislo-cation of the right one without other associated injuries. The patient underwent successful closed reduction of both hips. The clinical course and follow-up assessment of the patient was uneventful. Key words: Wounds and injuries; Hip dislocation; Accidents, traffic

[Trigeminal motor paralysis and dislocation of the temporo-mandibular joints].

Science.gov (United States)

Ohkawa, S; Yoshida, T; Ohsumi, Y; Tabuchi, M

1996-07-01

A 64-year-old woman with diabetes mellitus was admitted to our hospital with left hemiparesis of sudden onset. A brain MRI demonstrated a cerebral infarction in the ventral part of the right lower pons. When left hemiparesis worsened, she had dislocation of the temporo-mandibular joints repeatedly. Then, her lower jaw deviated to the right when she opened her mouth. Also, there was decreased contraction of the right masseter when she clenched her teeth. These findings suggest that there was trigeminal motor paralysis on the right side resulting from involvement of the intrapontine trigeminal motor nerve. She has no history of dislocation of the temporo-mandibular joints. An X-ray film showed that the temporo-mandibular joints were intact. Thus, it is possible that deviation of the lower jaw was the cause of this dislocation. We suspect that dislocation of the temporo-mandibular joints may occur as a complication of unilateral trigeminal motor paralysis. This has not been reported to our knowledge.

Sink strengths of dislocations taking into account bulk recombination effects

International Nuclear Information System (INIS)

Steinbach, E.

1988-01-01

The applicability of the rate theory to describe radiation damage processes is closely associated with the calculation of the various sink strengths. In this connection the effect of bulk recombination is usually neglected, because of the complexity of the problem. For this reason we present in this paper, for the first time, by means of the rigorous elastic-field model of a dislocation embedded in a lossy continuum, analytic expressions for the diffusion flux of irradiation-induced point defects into a dislocation, taking into account the elastic interaction, additional sinks and higher order bulk recombination effects. The resulting self-consistent formulae for the dislocation sink strengths clearly demonstrate the importance of the bulk recombination for the micro-structures of irradiated materials. In conjunction with the Harwell computer code VS5 it became clear that this new dislocation bias also leads to a change in the macrostructural observables. The order of magnitude of this effect emphasizes that neglecting bulk recombination as a general principle is not justified

Strain fields and line energies of dislocations in uranium dioxide

International Nuclear Information System (INIS)

Parfitt, David C; Bishop, Clare L; Wenman, Mark R; Grimes, Robin W

2010-01-01

Computer simulations are used to investigate the stability of typical dislocations in uranium dioxide. We explain in detail the methods used to produce the dislocation configurations and calculate the line energy and Peierls barrier for pure edge and screw dislocations with the shortest Burgers vector 1/2 . The easiest slip system is found to be the {100}(110) system for stoichiometric UO 2 , in agreement with experimental observations. We also examine the different strain fields associated with these line defects and the close agreement between the strain field predicted by atomic scale models and the application of elastic theory. Molecular dynamics simulations are used to investigate the processes of slip that may occur for the three different edge dislocation geometries and nudged elastic band calculations are used to establish a value for the Peierls barrier, showing the possible utility of the method in investigating both thermodynamic average behaviour and dynamic processes such as creep and plastic deformation.

The role of <100> edge dislocations in nucleating radiation-induced colloid particles in sodium chloride

Energy Technology Data Exchange (ETDEWEB)

Teutonico, L.J.

1982-09-01

A theoretical program to investigate the role of dislocations in the nucleation of sodium colloids in irradiated rock salt has been outlined. As the first study in the investigation the interaction of radiation-produced defects with the <001> edge dislocation in rock salt, i.e., the edge dislocation in the principal slip system of NaCl, has been considered. The interaction potential between a symmetric defect and the <001> edge dislocation has been determined on the basis of anisotropic elasticity theory. The potential arises from the interaction between the long-range stress field of the dislocation and the displacements around the point defect. The corresponding flow lines, i.e., the lines along which the defects flow to the dislocation, have also been determined. In general, the flow lines are closed loops passing through the center of the dislocation. One of the novel features introduced by anisotropy is the possibility of open flow lines for certain elastic constant values. Along some of these open flow lines defects are attracted to the dislocation, whereas long others defects are repelled from the dislocation of common plane. 33 refs., 17 figs.

Managing dislocations of the hip, knee, and ankle in the emergency department [digest].

Science.gov (United States)

Arnold, Caylyne; Fayos, Zane; Bruner, David; Arnold, Dylan; Gupta, Nachi; Nusbaum, Jeffrey

2017-12-20

Dislocation of the major joints of the lower extremities--hip, knee, and ankle--can occur due to motor-vehicle crashes, falls, and sports injuries. Hip dislocations are the most common, and they require emergent management to prevent avascular necrosis of the femoral head. Knee dislocations are uncommon but potentially dangerous injuries that can result in amputation due to the potential for missed secondary injury, especially if they are reduced spontaneously. Isolated ankle dislocations are relatively rare, as most ankle dislocations involve an associated fracture. This review presents an algorithmic approach to management that ensures that pain relief, imaging, reduction, vascular monitoring, and emergent orthopedic consultation are carried out in a timely fashion. [Points & Pearls is a digest of Emergency Medicine Practice.].

High Temperature Magneto-Elastic Instability of Dislocations in bcc Iron

International Nuclear Information System (INIS)

Dudarev, S.; Bullough, R.; Gilbert, M.; Derlet, P.

2007-01-01

Full text of publication follows: Density functional calculations show that the low temperature structure of self-interstitial defects in iron is fundamentally different from the structure of self-interstitial defects in all the other bcc metals. The origin of this anomaly is associated with the magnetic part of the cohesive energy of iron, where the Stoner exchange term stabilizes the body centred cubic phase, and where the magnetic part of energy is strongly affected by the large strain associated with the core region of an interstitial defect. At elevated temperatures magnetic excitations erode the stability of the bcc phase, giving rise to the gradual softening of the 110 transverse acoustic phonon modes and to the α-γ bcc-fcc martensitic phase transition occurring at 912 deg. C at normal pressure. Elastic moduli of bcc iron vary as a function of temperature with c' = (C 11 - c 12 )/2 vanishing at the α-γ transition point. This has significant effects on the magnitude of both the elastic interactions between dislocations and other defects in the material and on the intrinsic structural stability of the dislocations and other defects themselves. To evaluate structural stability of defects at elevated temperatures we investigate elastic self-energies of dislocations in the continuum anisotropic elasticity approximation. We also develop atomistic models of dislocations and point defects based on a generalised form of the magnetic potential. By varying the magnetic part of the potential we are able to reproduce the experimentally observed variation of elastic moduli as a function of temperature, and assess relative stability of various types of defect structures. Our analysis shows that, in complete contrast to other straight dislocations, the elastic self-energy of straight 100 edge dislocations actually sharply decreases as we approach the α-γ transition, indicating that this surprising fact is a probable explanation of the frequent observation of the 100

Dislocation density evolution in the process of high-temperature treatment and creep of EK-181 steel

Energy Technology Data Exchange (ETDEWEB)

Vershinina, Tatyana, E-mail: vershinina@bsu.edu.ru [Belgorod State National Research University, Pobedy street 85, Belgorod 308015 (Russian Federation); Leont' eva-Smirnova, Maria, E-mail: smirnova@bochvar.ru [Bochvar High-Technology Research Institute of Inorganic Materials, ul. Rogova 5, Moscow 123098 (Russian Federation)

2017-03-15

X-ray diffraction has been used to study the dislocation structure in ferrite-martensite high-chromium steel EK-181 in the states after heat treatment and high-temperature creep. The influence of heat treatment and stress on evolution of lath martensite structure was investigated by and electron back-scattered diffraction. The effect of nitrogen content on the total dislocation density, fraction of edge and screw dislocation segments are analyzed. - Highlights: •Fraction of edge dislocation in quenched state depends on nitrogen concentration. •Nitrogen affects the character of dislocation structure evolution during annealing. •Edge dislocations fraction influences on dislocation density after aging and creep.

BILATERAL ANTERIOR DISLOCATION OF SHOULDER WITH GREATER TUBEROSITY FRACTURE DUE TO HYPONATREMIA : A RARE PRESENTATION

Directory of Open Access Journals (Sweden)

Sivananda

2015-01-01

Full Text Available We here report a rare presentation of bilateral anterior dislocation of shoulder with associated fracture of greater tuberosity in a 38 year old male due to minor trauma which he sustained secondary to hyponatremia induced irritability. There was no associ ated rotator cuff tear which is often associated with BADS which makes this presentation unique. Unilateral dislocation of shoulder is a common condition which is frequently encountered in emergency trauma department. Anterior dislocation is more common th an posterior dislocation. However, simultaneous bilateral shoulder dislocations are usually posterior. Bilateral anterior dislocations with fractures of the greater tuberosity are even rarer and are usually associated with trauma or seizures

MRI findings in posterior disc prolapse associated with cervical fracture dislocation

International Nuclear Information System (INIS)

Maeda, Go; Shiba, Keiichiro; Ueta, Takayoshi; Shirasawa, Kenzo; Ohta, Hideki; Mori, Eiji; Rikimaru, Shunichi; Hida, Shinichi; Tokunaga, Masami

1994-01-01

Although disc injury is common in cervical spinal fractures the mechanism of disc herniation in cervical fracture dislocations is not known. This study evaluated the pathogenesis of disc hernia in cervical fracture dislocations. Twenty-two patients who underwent anterior and posterior spinal fixation were studied. Findings of preoperative magnetic resonance imaging (MRI) were compared with surgical findings. During surgery, cervical disk hernia were found in six patients (27 %), and the MRI finding of these patients were evaluated in detail. We concluded that the characteristic MRI findings of cervical disc hernia are as follows: 1) discontinuity of injured disc, 2) anterior indentation of spinal cord at the site of dislocated vertebral body, and 3) signal irregularity at the site of interspace between dislocated vertebral body and spinal cord. (author)

MRI findings in posterior disc prolapse associated with cervical fracture dislocation

Energy Technology Data Exchange (ETDEWEB)

Maeda, Go; Shiba, Keiichiro; Ueta, Takayoshi; Shirasawa, Kenzo; Ohta, Hideki; Mori, Eiji; Rikimaru, Shunichi; Hida, Shinichi; Tokunaga, Masami (Spinal Injuries Center, Fukuoka (Japan))

1994-03-01

Although disc injury is common in cervical spinal fractures the mechanism of disc herniation in cervical fracture dislocations is not known. This study evaluated the pathogenesis of disc hernia in cervical fracture dislocations. Twenty-two patients who underwent anterior and posterior spinal fixation were studied. Findings of preoperative magnetic resonance imaging (MRI) were compared with surgical findings. During surgery, cervical disk hernia were found in six patients (27 %), and the MRI finding of these patients were evaluated in detail. We concluded that the characteristic MRI findings of cervical disc hernia are as follows: (1) discontinuity of injured disc, (2) anterior indentation of spinal cord at the site of dislocated vertebral body, and (3) signal irregularity at the site of interspace between dislocated vertebral body and spinal cord. (author).

Non-planar dislocations: 3D models and thermally-activated glide processes

International Nuclear Information System (INIS)

Ngan, A.H.W.

2005-01-01

In recent years, there has been a renewed interest in studying the cross-slip of screw dislocations in the simple face-centred cubic (FCC) structure. This paper serves to address parallel developments in modelling the cross-slip of screw dislocations in the body-centred cubic (BCC) structure and the ordered L1 2 structure. In the latter two cases, the dislocation cores have non-planar spreading offering high intrinsic Peierls stresses. The flow behaviours of these materials, such as the non-Schmid behaviour and temperature-dependence of flow stress, are largely due to the behaviours of single dislocations. 3D atomistic modelling of the minimum-energy path for the glide processes in these cases is performed with an aim to reconcile with experimentally determined activation energies for slip

Model for the evolution of network dislocation density in irradiated metals

International Nuclear Information System (INIS)

Garner, F.A.; Wolfer, W.G.

1982-01-01

It is a well-known fact that the total dislocation density that evolves in irradiated metals is a strong function of irradiation temperature. The dislocation density comprises two components, however, and only one of these (Frank loops) retains its temperature dependence at high fluence. The network dislocation density approaches a saturation level which is relatively insensitive to starting microstructure, stress, irradiation temperature, displacement rate and helium level. The latter statement is supported in this paper by a review of published microstructural data. A model has been developed to explain the insensitivity to many variables of the saturation network dislocation density in irradiated metals. This model also explains how the rate of approach to saturation can be sensitive to displacement rate and temperature while the saturation level itself is not dependent on temperature

Microstructure, quantification and control of dislocations in bast-type plant fibres

DEFF Research Database (Denmark)

Madsen, Bo; Lester, Catherine L.; Mortensen, Ulrich Andreas

2016-01-01

Bast-type plant fibres are increasingly being used for structural composite applications where high quality fibres with good mechanical properties are required. A central aspect for this application is the existence of dislocations in the cell wall of plant fibres, i.e. regions of misaligned...... cellulose microfibrils, which are believed to form weak points leading to reduced mechanical properties. In the present study, microstructural observations of dislocations are made using high-magnification scanning electron microscopy. An experimental protocol using polarized optical microscopy and image...... that this leads to a reduction in the content of dislocations. This is indicating that dislocations in the cell wall of plant fibres are changeable structures. Preliminary work is presented where plant fibres are exposed to physical treatments involving moisture and mechanical straining in order to change...

Nucleation of dislocations from [0 0 1] bicrystal interfaces in aluminum

International Nuclear Information System (INIS)

Spearot, Douglas E.; Jacob, Karl I.; McDowell, David L.

2005-01-01

It is well established from molecular dynamics simulations that grain boundaries in nanocrystalline samples serve as sources of dislocations. In this work, we use molecular dynamics simulations to study the mechanisms associated with dislocation nucleation from bicrystal [0 0 1] interfaces in aluminum. Three interface misorientations are studied, including the Σ5 (3 1 0) boundary, which has a high density of coincident atomic sites. Molecular dynamics simulations show that full dislocation loops are nucleated from each interface during uniaxial tension. After the second partial dislocation is emitted, a ledge remains within the interface at the intersection of the slip plane and the bicrystal boundary. A disclination dipole model is proposed for the structure of the distorted interface accounting for local lattice rotations and the ledge at the nucleation site

An MD simulation of interactions between self-interstitial atoms and edge dislocation in bcc transition metals

Energy Technology Data Exchange (ETDEWEB)

Kamiyama, H. (Aomori Public College, 153-4 Yamazaki, Goushi-zawa, Aomori 030-01 (Japan)); Rafii-Tabar, H. (Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980 (Japan)); Kawazoe, Y. (Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980 (Japan)); Matsui, H. (Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980 (Japan))

1994-09-01

According to our model on the mechanism of dislocation bias reduction based on the interaction of dumbbell self-interstitial atoms (SIAs) with dislocation, the bias is significantly different depending on the dumbbell configuration in the dislocation strain field. A large-scale molecular dynamics (MD) simulation is performed to reveal the stability and the mechanism of diffusion of dumbbell SIAs near the edge dislocation core in bcc iron. Most SIAs take the crowdion configuration parallel to the Burgers vector in the expansion side of the dislocation. Such crowdions are stable in the temperature range of this simulation, i.e. between 373 and 473 K, making one-dimensional random to-and-fro motion parallel to the dislocation Burgers vector staying at several atomic layers below'' the dislocation core. This means that the SIA does not approach the dislocation core. These results suggest that the stable configuration of SIAs is seriously affected by the dislocation resulting in a reduction of bias factor. ((orig.))

An MD simulation of interactions between self-interstitial atoms and edge dislocation in bcc transition metals

International Nuclear Information System (INIS)

Kamiyama, H.; Rafii-Tabar, H.; Kawazoe, Y.; Matsui, H.

1994-01-01

According to our model on the mechanism of dislocation bias reduction based on the interaction of dumbbell self-interstitial atoms (SIAs) with dislocation, the bias is significantly different depending on the dumbbell configuration in the dislocation strain field. A large-scale molecular dynamics (MD) simulation is performed to reveal the stability and the mechanism of diffusion of dumbbell SIAs near the edge dislocation core in bcc iron. Most SIAs take the crowdion configuration parallel to the Burgers vector in the expansion side of the dislocation. Such crowdions are stable in the temperature range of this simulation, i.e. between 373 and 473 K, making one-dimensional random to-and-fro motion parallel to the dislocation Burgers vector staying at several atomic layers ''below'' the dislocation core. This means that the SIA does not approach the dislocation core. These results suggest that the stable configuration of SIAs is seriously affected by the dislocation resulting in a reduction of bias factor. ((orig.))

Testicular dysgenesis syndrome and the estrogen hypothesis: a quantitative meta-analysis.

Science.gov (United States)

Martin, Olwenn V; Shialis, Tassos; Lester, John N; Scrimshaw, Mark D; Boobis, Alan R; Voulvoulis, Nikolaos

2008-02-01

Male reproductive tract abnormalities such as hypospadias and cryptorchidism, and testicular cancer have been proposed to comprise a common syndrome together with impaired spermatogenesis with a common etiology resulting from the disruption of gonadal development during fetal life, the testicular dysgenesis syndrome (TDS). The hypothesis that in utero exposure to estrogenic agents could induce these disorders was first proposed in 1993. The only quantitative summary estimate of the association between prenatal exposure to estrogenic agents and testicular cancer was published over 10 years ago, and other systematic reviews of the association between estrogenic compounds, other than the potent pharmaceutical estrogen diethylstilbestrol (DES), and TDS end points have remained inconclusive. We conducted a quantitative meta-analysis of the association between the end points related to TDS and prenatal exposure to estrogenic agents. Inclusion in this analysis was based on mechanistic criteria, and the plausibility of an estrogen receptor (ER)-alpha-mediated mode of action was specifically explored. We included in this meta-analysis eight studies investigating the etiology of hypospadias and/or cryptorchidism that had not been identified in previous systematic reviews. Four additional studies of pharmaceutical estrogens yielded a statistically significant updated summary estimate for testicular cancer. The doubling of the risk ratios for all three end points investigated after DES exposure is consistent with a shared etiology and the TDS hypothesis but does not constitute evidence of an estrogenic mode of action. Results of the subset analyses point to the existence of unidentified sources of heterogeneity between studies or within the study population.

Dislocation multiplication rate in the early stage of germanium plasticity

Czech Academy of Sciences Publication Activity Database

Fikar, J.; Dupas, Corinne; Kruml, Tomáš; Jacques, A.; Martin, J. L.

400-401, - (2005), s. 431-434 ISSN 0921-5093. [Dislocations 2004. La Colle-sur-Loup, 13.09.2004-17.09.2004] Institutional research plan: CEZ:AV0Z2041904 Keywords : dislocation multiplication * germanium * constitutive modelling Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.347, year: 2005

Management of acute dislocation of the temporomandibular joint in dental practice.

LENUS (Irish Health Repository)

McGoldrick, David M

2010-12-01

Acute dislocation of the temporomandibular joint is a situation that, although rare, may present to the dentist in practice at any time. A number of activities, such as removal of a tooth, may cause dislocation. The event is painful and distressing for the patient, their family and the dental team. Prompt management minimises discomfort, distress and long-term morbidity to the patient. We describe the aetiology of acute dislocation and outline a number of techniques that will aid the clinican in dealing with this event.

Dislocation-free zone model of fracture comparison with experiments

International Nuclear Information System (INIS)

Ohr, S.M.; Chang, S.

1982-01-01

The dislocation-free zone (DFZ) model of fracture has been extended to study the relationship between the stress intensity factor, extent of plastic deformation, and crack tip geometry of an elastic-plastic crack as a function of applied stress. The results show that the stress intensity factor K decreases from the elastic value at first slowly, then goes rapidly to zero as the number of dislocations in the plastic zone increases. The crack with a zero stress intensity factor has its crack tip stress field completely relaxed by plastic deformation and hence is called a plastic crack. Between the elastic and plastic cracks, a wide range of elastic-plastic cracks having both a stress singularity and a plastic zone are possible. These elastic-plastic cracks with a DFZ are predicted if there is a critical stress intensity factor K/sub g/ required for the generation of dislocations at the crack tip. The expression for K/sub g/ is obtained from the crack tip dislocation nucleation model of Rice and Thomson. In most metals, the magnitude of K/sub g/ is less than the critical stress intensity factor for brittle fracture K/sub c/. The values of K are determined from electron microscope fracture experiments for various metals and they are found to be in good agreement with the K/sub g/ predicted from the model. It is concluded that for most ductile and semibrittle metals, the mechanism of dislocation generation is more important than the fracture surface energy in determining the stress intensity factor at the crack tip

MRI after patellar dislocation. Assessment of risk factors and injury to the joint

International Nuclear Information System (INIS)

Diederichs, G.

2013-01-01

Patellar dislocation is the lateral displacement of the patella from the femoral trochlea. Affected individuals typically have underlying anatomic risk factors of variable magnitude, which, in conjunction with leg rotation, cause the event. Magnetic resonance imaging (MRI) permits straightforward diagnosis of the typical features of recent patellar dislocation: contusion edema of the inferomedial patella and the lateral femoral condyle as well as rupture of the medial patellofemoral ligament. In case of concomitant osteochondral injury, early surgical refixation may be indicated, depending on the size. After a first dislocation, which can damage the capsuloligamentous stabilizers, subjects may sustain further dislocations or even develop chronic patellofemoral instability, depending on the presence and severity of anatomic variants. A wide range of conservative and surgical treatments are available. While a first patellar dislocation is often treated conservatively, surgical strategies after a second dislocation depend on the pattern of injury and the severity of underlying anatomic risk factors. The most relevant predisposing variants are trochlear dysplasia, patella alta, and an abnormal tibial tubercle to trochlear groove distance (TT-TG). The radiologist's report should give a quantitative estimate of both the injuries resulting from dislocation and the underlying anatomic risk factors. An accurate characterization of the individual pathomechanism is crucial for tailoring treatment. (orig.)

Microstructure-sensitive modelling of dislocation creep in polycrystalline FCC alloys: Orowan theory revisited

Energy Technology Data Exchange (ETDEWEB)

Galindo-Nava, E.I., E-mail: eg375@cam.ac.uk; Rae, C.M.F.

2016-01-10

A new approach for modelling dislocation creep during primary and secondary creep in FCC metals is proposed. The Orowan equation and dislocation behaviour at the grain scale are revisited to include the effects of different microstructures such as the grain size and solute atoms. Dislocation activity is proposed to follow a jog-diffusion law. It is shown that the activation energy for cross-slip E{sub cs} controls dislocation mobility and the strain increments during secondary creep. This is confirmed by successfully comparing E{sub cs} with the experimentally determined activation energy during secondary creep in 5 FCC metals. It is shown that the inverse relationship between the grain size and dislocation creep is attributed to the higher number of strain increments at the grain level dominating their magnitude as the grain size decreases. An alternative approach describing solid solution strengthening effects in nickel alloys is presented, where the dislocation mobility is reduced by dislocation pinning around solute atoms. An analysis on the solid solution strengthening effects of typical elements employed in Ni-base superalloys is also discussed. The model results are validated against measurements of Cu, Ni, Ti and 4 Ni-base alloys for wide deformation conditions and different grain sizes.

Interface effects on elastic behavior of a screw dislocation around double nanowires

International Nuclear Information System (INIS)

Li, Jia; Fang, Qihong; Liu, Youwen

2014-01-01

The elastic behavior of a screw dislocation around double nanowires (NWs) is addressed with taking into account the interface stress effect in controlling mechanical response of nanoscale structures. The stress boundary conditions at the interface of the NWs are modified by incorporating surface/interface stress. The analytic solution of complex functions of the right NW, the infinite matrix and the left NW are obtained by applying the complex variable method. The equilibrium positions and the image force acting on the dislocation of a screw dislocation near one of the NWs are discussed in detail and compared with those obtained within the classical theory of elasticity. It is shown that the NWs possess a significant local softening or hardening at the interface, which can change the nature of the equilibrium positions for the dislocation. The radius ratio between NWs has profound effects on the equilibrium position. Additionally, the soft NW with the positive interface stress inhibits the dislocation motion to enhance its own structural stability.

Dislocation analysis of die-cast Mg-Al-Ca alloy after creep deformation

International Nuclear Information System (INIS)

Terada, Yoshihiro; Itoh, Daigo; Sato, Tatsuo

2009-01-01

Tensile creep tests were combined with detailed transmission electron microscopy in order to characterize the dislocation movements during creep and to explain the creep properties of the Mg-Al-Ca AX52 die-cast alloy at 473 K and stresses from 15 to 70 MPa. TEM observations indicate that dislocations are generated within the primary α-Mg grain in the die-casting process, which consist of both the basal and non-basal segments. The basal segments of dislocations are able to bow out and glide on the basal planes under the influence of a stress, and the jogs follow the basal segments with the help of climb during creep. The creep mechanism for the alloy is deduced as dislocation climb due to the formation of sub-boundaries during creep, while the easy glide of the basal segments of dislocations is controlling the creep rates immediately after the stress application of creep tests.

Extent of cortical involvement in amyotrophic lateral sclerosis--an analysis based on cortical thickness.

Science.gov (United States)

Thorns, Johannes; Jansma, Henk; Peschel, Thomas; Grosskreutz, Julian; Mohammadi, Bahram; Dengler, Reinhard; Münte, Thomas F

2013-10-18

Besides the defining involvement of upper and lower motor neurons, the involvement of extramotor structures has been increasingly acknowledged in amyotrophic lateral sclerosis (ALS). Here we investigated a group of 14 mildly to moderately affected ALS patients and 14 age-matched healthy control participants using cortical thickness analysis. Cortical thickness was determined from high resolution 3D T1 magnetic resonance images and involved semiautomatic segmentation in grey and white matter, cortical alignment and determination of thickness using the Laplace method. In addition to a whole-cortex analysis a region of interest approach was applied. ALS patients showed regions of significant cortical thinning in the pre- and postcentral gyri bilaterally. Further regions of cortical thinning included superior and inferior parietal lobule, angular and supramarginal gyrus, insula, superior frontal, temporal and occipital regions, thus further substantiating extramotor involvement in ALS. A relationship between cortical thickness of the right superior frontal cortex and clinical severity (assessed by the ALS functional rating scale) was also demonstrated. Cortical thickness is reduced in ALS not only in motor areas but in widespread non-motor cortical areas. Cortical thickness is related to clinical severity.

Video Analysis of Primary Shoulder Dislocations in Rugby Tackles.

Science.gov (United States)

Maki, Nobukazu; Kawasaki, Takayuki; Mochizuki, Tomoyuki; Ota, Chihiro; Yoneda, Takeshi; Urayama, Shingo; Kaneko, Kazuo

2017-06-01

Characteristics of rugby tackles that lead to primary anterior shoulder dislocation remain unclear. To clarify the characteristics of tackling that lead to shoulder dislocation and to assess the correlation between the mechanism of injury and morphological damage of the glenoid. Case series; Level of evidence, 4. Eleven elite rugby players who sustained primary anterior shoulder dislocation due to one-on-one tackling between 2001 and 2014 were included. Using an assessment system, the tackler's movement, posture, and shoulder and head position were evaluated in each phase of tackling. Based on 3-dimensional computed tomography, the glenoid of the affected shoulder was classified into 3 types: intact, erosion, and bone defect. Orientation of the glenoid defect and presence of Hill-Sachs lesion were also evaluated. Eleven tackles that led to primary shoulder dislocation were divided into hand, arm, and shoulder tackle types based on the site at which the tackler contacted the ball carrier initially. In hand and arm tackles, the tackler's shoulder joint was forcibly moved to horizontal abduction by the impact of his upper limb, which appeared to result from an inappropriate approach to the ball carrier. In shoulder tackles, the tackler's head was lowered and was in front of the ball carrier at impact. There was no significant correlation between tackle types and the characteristics of bony lesions of the shoulder. Although the precise mechanism of primary anterior shoulder dislocation could not be estimated from this single-view analysis, failure of individual tackling leading to injury is not uniform and can be caused by 2 main factors: failure of approach followed by an extended arm position or inappropriate posture of the tackler at impact, such as a lowered head in front of the opponent. These findings indicate that injury mechanisms should be assessed for each type of tackle, as it is unknown whether external force to the glenoid is different in each mechanism

Primary patellar dislocations without surgical stabilization or recurrence: how well are these patients really doing?

Science.gov (United States)

Magnussen, Robert A; Verlage, Megan; Stock, Elizabeth; Zurek, Lauren; Flanigan, David C; Tompkins, Marc; Agel, Julie; Arendt, Elizabeth A

2017-08-01

While a significant research has gone into identifying patients at highest risk of recurrence following primary patellar dislocation, there has been little work exploring the outcomes of patients who do not have a recurrent patellar dislocation. We hypothesize that patients without recurrent dislocation episodes will exhibit significantly higher KOOSs than those who suffer recurrent dislocations, but lower scores than published age-matched normative data. A retrospective review of patients with nonoperatively treated primary lateral patellar dislocations was carried out, and patients were contacted at a mean of 3.4 years (range 1.3-5.5 years) post-injury. Information regarding subsequent treatment and recurrent dislocations along with patient-reported outcome scores and activity level was collected. One hundred and eleven patients (29.8 %) of 373 eligible patients agreed to study participation, seven of whom were excluded because they underwent subsequent patellar stabilization surgery on the index knee. Seventy-six patients (73.1 %) reported no further dislocation events, and the mean KOOS subscales at follow-up were: symptoms-80.2 ± 18.8, pain-81.8 ± 16.2, ADL-88.7 ± 15.9, sport/recreation-72.1 ± 24.4, and QOL-63.9 ± 23.8 at a mean follow-up of 3.3 years (range 1.3-5.5 years). No significant differences in any of the KOOS subscales were noted between these patients and the group that reported recurrent patellar dislocations. Only 26.4 % of the patients without further dislocations reported they were able to return to desired sport activities without limitations following their dislocation. Patients who do not report recurrent patellar dislocations following nonoperative treatment of primary patellar dislocations are in many cases limited by this injury 3 years following the initial dislocation event. Retrospective cohort study, Level III.

XX ovarian dysgenesis is caused by a PSMC3IP/HOP2 mutation that abolishes coactivation of estrogen-driven transcription.

Science.gov (United States)

Zangen, David; Kaufman, Yotam; Zeligson, Sharon; Perlberg, Shira; Fridman, Hila; Kanaan, Moein; Abdulhadi-Atwan, Maha; Abu Libdeh, Abdulsalam; Gussow, Ayal; Kisslov, Irit; Carmel, Liran; Renbaum, Paul; Levy-Lahad, Ephrat

2011-10-07

XX female gonadal dysgenesis (XX-GD) is a rare, genetically heterogeneous disorder characterized by lack of spontaneous pubertal development, primary amenorrhea, uterine hypoplasia, and hypergonadotropic hypogonadism as a result of streak gonads. Most cases are unexplained but thought to be autosomal recessive. We elucidated the genetic basis of XX-GD in a highly consanguineous Palestinian family by using homozygosity mapping and candidate-gene and whole-exome sequencing. Affected females were homozygous for a 3 bp deletion (NM_016556.2, c.600_602del) in the PSMC3IP gene, leading to deletion of a glutamic acid residue (p.Glu201del) in the highly conserved C-terminal acidic domain. Proteasome 26S subunit, ATPase, 3-Interacting Protein (PSMC3IP)/Tat Binding Protein Interacting Protein (TBPIP) is a nuclear, tissue-specific protein with multiple functions. It is critical for meiotic recombination as indicated by the known role of its yeast ortholog, Hop2. Through the C terminus (not present in yeast), PSMC3IP also coactivates ligand-driven transcription mediated by estrogen, androgen, glucocorticoid, progesterone, and thyroid nuclear receptors. In cell lines, the p.Glu201del mutation abolished PSMC3IP activation of estrogen-driven transcription. Impaired estrogenic signaling can lead to ovarian dysgenesis both by affecting the size of the follicular pool created during fetal development and by failing to counteract follicular atresia during puberty. PSMC3IP joins previous genes known to be mutated in XX-GD, the FSH receptor, and BMP15, highlighting the importance of hormonal signaling in ovarian development and maintenance and suggesting a common pathway perturbed in isolated XX-GD. By analogy to other XX-GD genes, PSMC3IP is also a candidate gene for premature ovarian failure, and its role in folliculogenesis should be further investigated. Copyright © 2011 The American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.

Measuring strain and rotation fields at the dislocation core in graphene

Science.gov (United States)

Bonilla, L. L.; Carpio, A.; Gong, C.; Warner, J. H.

2015-10-01

Strain fields, dislocations, and defects may be used to control electronic properties of graphene. By using advanced imaging techniques with high-resolution transmission electron microscopes, we have measured the strain and rotation fields about dislocations in monolayer graphene with single-atom sensitivity. These fields differ qualitatively from those given by conventional linear elasticity. However, atom positions calculated from two-dimensional (2D) discrete elasticity and three-dimensional discrete periodized Föppl-von Kármán equations (dpFvKEs) yield fields close to experiments when determined by geometric phase analysis. 2D theories produce symmetric fields whereas those from experiments exhibit asymmetries. Numerical solutions of dpFvKEs provide strain and rotation fields of dislocation dipoles and pairs that also exhibit asymmetries and, compared with experiments, may yield information on out-of-plane displacements of atoms. While discrete theories need to be solved numerically, analytical formulas for strains and rotation about dislocations can be obtained from 2D Mindlin's hyperstress theory. These formulas are very useful for fitting experimental data and provide a template to ascertain the importance of nonlinear and nonplanar effects. Measuring the parameters of this theory, we find two characteristic lengths between three and four times the lattice spacings that control dilatation and rotation about a dislocation. At larger distances from the dislocation core, the elastic fields decay to those of conventional elasticity. Our results may be relevant for strain engineering in graphene and other 2D materials of current interest.

Dislocation structures and mechanical behaviour of Ge single crystals deformed by compression

International Nuclear Information System (INIS)

Nyilas, K.; Dupas, C.; Kruml, T.; Zsoldos, L.; Ungar, T.; Martin, J.L.

2004-01-01

Stress-strain curves of germanium interrupted by dip tests reveal that the internal stresses ascend parallel to the applied stress in a strain-rate dependent way. To understand this peculiar behaviour, the dislocation microstructure has been characterized. Transmission electron microscopy images show that regions of high dislocation activity along the primary slip system are separated by dislocation-free zones. X-ray microdiffraction reveals that the dislocation density is fluctuating on a 100 μm scale. X-ray reciprocal-space mapping, together with scanning microdiffraction, shows that misoriented mosaic blocks are forming owing to the boundary conditions in the compression test. These preliminary results reveal deformation heterogeneity both at macroscopic and mesoscopic scales

Interface Mediated Nucleation and Growth of Dislocations in fcc-bcc nanocomposite

Science.gov (United States)

Zhang, Ruifeng; Wang, Jian; Beyerlein, Irene J.; Germann, Timothy C.

2011-03-01

Heterophase interfaces play a crucial role in determining material strength for nanostructured materials because they can block, store, nucleate, and remove dislocations, the essential defects that enable plastic deformation. Much recent theoretical and experimental effort has been conducted on nanostructured Cu-Nb multilayer composites that exhibited extraordinarily high strength, ductility, and resistance to radiation and mechanical loading. In decreasing layer thicknesses to the order of a few tens of nanometers or less, the deformation behavior of such composites is mainly controlled by the Cu/Nb interface. In this work, we focus on the cooperative mechanisms of dislocation nucleation and growth from Cu/Nb interfaces, and their interaction with interface. Two types of experimentally observed Cu/Nb incoherent interfaces are comparatively studied. We found that the preferred dislocation nucleation sites are closely related to atomic interface structure, which in turn, depend on the orientation relationship. The activation stress and energies for an isolated Shockley dislocation loop of different sizes from specific interface sites depend strongly on dislocation size, atomic interface pattern, and loading conditions. Such findings provide important insight into the mechanical response of a wide range of fcc/bcc metallic nanocomposites via atomic interface design.

Dislocation structure evolution in 304L stainless steel and weld joint during cyclic plastic deformation

Energy Technology Data Exchange (ETDEWEB)

Wang, Hao; Jing, Hongyang; Zhao, Lei; Han, Yongdian; Lv, Xiaoqing [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072 (China); Xu, Lianyong, E-mail: xulianyong@tju.edu.cn [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072 (China)

2017-04-06

Dislocation structures and their evolution of 304L stainless steel and weld metal made with ER308L stainless steel welding wire subjected to uniaxial symmetric strain-controlled loading and stress-controlled ratcheting loading were observed by transmission electron microscopy (TEM). The correlation between the cyclic response and the dislocation structure has been studied. The experiment results show that the cyclic behaviour of base metal and weld metal are different. The cyclic behaviour of the base metal consists of primary hardening, slight softening and secondary hardening, while the weld metal shows a short hardening within several cycles followed by the cyclic softening behaviour. The microscopic observations indicate that in base metal, the dislocation structures evolve from low density patterns to those with higher dislocation density during both strain cycling and ratcheting deformation. However, the dislocation structures of weld metal change oppositely form initial complicated structures to simple patterns and the dislocation density gradually decrease. The dislocation evolution presented during the strain cycling and ratcheting deformation is summarized, which can qualitatively explain the cyclic behaviour and the uniaxial ratcheting behaviour of two materials. Moreover, the dislocation evolution in the two types of tests is compared, which shows that the mean stress has an effect on the rate of dislocation evolution during the cyclic loading.

The influence of anisotropy on the core structure of Shockley partial dislocations within FCC materials

Science.gov (United States)

Szajewski, B. A.; Hunter, A.; Luscher, D. J.; Beyerlein, I. J.

2018-01-01

Both theoretical and numerical models of dislocations often necessitate the assumption of elastic isotropy to retain analytical tractability in addition to reducing computational load. As dislocation based models evolve towards physically realistic material descriptions, the assumption of elastic isotropy becomes increasingly worthy of examination. We present an analytical dislocation model for calculating the full dissociated core structure of dislocations within anisotropic face centered cubic (FCC) crystals as a function of the degree of material elastic anisotropy, two misfit energy densities on the γ-surface ({γ }{{isf}}, {γ }{{usf}}) and the remaining elastic constants. Our solution is independent of any additional features of the γ-surface. Towards this pursuit, we first demonstrate that the dependence of the anisotropic elasticity tensor on the orientation of the dislocation line within the FCC crystalline lattice is small and may be reasonably neglected for typical materials. With this approximation, explicit analytic solutions for the anisotropic elasticity tensor {B} for both nominally edge and screw dislocations within an FCC crystalline lattice are devised, and employed towards defining a set of effective isotropic elastic constants which reproduce fully anisotropic results, however do not retain the bulk modulus. Conversely, Hill averaged elastic constants which both retain the bulk modulus and reasonably approximate the dislocation core structure are employed within subsequent numerical calculations. We examine a wide range of materials within this study, and the features of each partial dislocation core are sufficiently localized that application of discrete linear elasticity accurately describes the separation of each partial dislocation core. In addition, the local features (the partial dislocation core distribution) are well described by a Peierls-Nabarro dislocation model. We develop a model for the displacement profile which depends upon

coccygectomy for chronic, symptomatic coccygeal dislocation

African Journals Online (AJOL)

evidence revealed anterior dislocation of terminal two coccygeal vertebrae ... a prominent terminal coccygeal curvature. The patient presented during her first visit with. CT SCAN .... physiotherapy, modified wedge-shaped coccygeal foam pads ...

The collapse of stacking-fault tetrahedra by interaction with gliding dislocations

International Nuclear Information System (INIS)

Matsukawa, Y.; Osetsky, Yu.N.; Stoller, R.E.; Zinkle, S.J.

2005-01-01

The collapse of stacking-fault tetrahedra (SFT) by gliding dislocations was observed in in situ straining experiments in a transmission electron microscope (TEM). A stacking-fault tetrahedron was collapsed by intersection with a gliding perfect dislocation: only the base portion divided by the gliding plane of the dislocation annihilated, while the apex portion remained intact. As a result of analysis on evolution of atom configuration induced by intersection with perfect dislocation in SFT, it was found that an unusual atom configuration inevitably appeared in one of the ledges formed on stacking-fault planes, which is traditionally called I-ledge: the atoms on adjacent (1 1 1) planes were overlapping each other. The overlapping configuration provides a strong repulsive force, being a conceivable driving force to induce a chain reaction of atom displacements that collapses the SFT base portion

Acoustic emission generated by dislocation mechanisms during the deformation of metals

International Nuclear Information System (INIS)

Heiple, C.R.

1978-01-01

Acoustic emission is a transient elastic wave generated by the rapid release of energy within a material. A wide variety of mechanisms have been proposed as possible sources of acoustic emission. Proposed mechanisms have included crack propagation, precipitate fracture, twin formation, martensite formation, dislocation motion and/or multiplication. This paper is concerned with acoustic emission generated by dislocation mechanisms operating during plastic deformation. Twinning and martensitic phase transformations are excluded even though dislocation motion is involved in the nucleation and growth of twins and the growth of martensite

Acoustic emission generated by dislocation mechanisms during the deformation of metals

Energy Technology Data Exchange (ETDEWEB)

Heiple, C.R.

1978-01-01

Acoustic emission is a transient elastic wave generated by the rapid release of energy within a material. A wide variety of mechanisms have been proposed as possible sources of acoustic emission. Proposed mechanisms have included crack propagation, precipitate fracture, twin formation, martensite formation, dislocation motion and/or multiplication. This paper is concerned with acoustic emission generated by dislocation mechanisms operating during plastic deformation. Twinning and martensitic phase transformations are excluded even though dislocation motion is involved in the nucleation and growth of twins and the growth of martensite.

A rare case report of 46XY mixed gonadal dysgenesis

Directory of Open Access Journals (Sweden)

Rakesh Arora

2013-01-01

Full Text Available A 16-year-old person, reared as female presented with complaints of genital ambiguity and primary amenorrhoea along with lack of secondary sexual characters, but without short stature and Turner′s stigmata. She was taking steroids after being misdiagnosed as congenital adrenal hyperplasia (CAH. Karyotype analysis revealed 46XY karyotype. There was no evidence of hypocortisolemia (cortisol 9.08 μg/dl, adrenocorticotropic hormone [ACTH] 82.5 pg/ml or elevated level of 17-OH-progesterone (0.16 ng/ml. Pooled luteinizing hormone (LH was 11.79 mIU/ml and follicle-stimulating hormone (FSH was 66.37 mIU/ml. Serum estradiol level was 25 pg/ml (21-251. Basal and 72 h post beta-human chorionic gonadotropin (hCG levels of androstenedione and testosterone levels were done (basal testosterone of 652 ng/dl and basal androstenedione of 1.17 ng/ml; 72 h post hCG testosterone of 896 ng/dl and androstenedione of 1.34 ng/ml. Magnetic resonance imaging (MRI pelvis (with ultrasonogrphy [USG] correlation revealed uterus didelphys with obstructed right moiety and bilateral ovarian-like structures. Right sided gonads and adjacent tubal structures were visualized laparoscopically and removed. Left sided gonads were not visualized and Mullerian remnants were adhered to sigmoid colon. Histopathological examination revealed presence of testicular tissue showing atrophic seminiferous tubules with hyperplasia of Leydig cells. No ovarian tissue was seen. Based on these results a diagnosis of 46XY mixed gonadal dysgenesis (MGD was made, which is rare and is difficult to distinguish from 46XY ovotesticular disorder of sexual differentiation (OT-DSD. The patient was managed with a multidisciplinary approach and fertility issues discussed with the patient′s caregivers.

Electro-optical properties of dislocations in silicon and their possible application for light emitters

Energy Technology Data Exchange (ETDEWEB)

Arguirov, Tzanimir Vladimirov

2007-10-14

This thesis addresses the electro-optical properties of silicon, containing dislocations. The work demonstrates that dislocation specific radiation may provide a means for optical diagnostics of solar cell grade silicon. It provides insight into the mechanisms governing the dislocation recombination activity, their radiation, and how are they influenced by other defects present in silicon. We demonstrate that photoluminescence mapping is useful for monitoring the recombination activity in solar cell grade silicon and can be applied for identification of contaminants, based on their photoluminescence signatures. It is shown that the recombination at dislocations is strongly influenced by the presence of metals at the dislocation sites. The dislocation radiation activity correlates with their electrical activity. It is shown that the dislocation and band-to-band luminescence are essentially anti-correlated. {beta}FeSi{sub 2} precipitates, with a luminescence at 0.8 eV, were detected within the grains of block cast materials. They exhibit a characteristic feature of quantum dots, namely blinking. The second aspect of the thesis concerns the topic of silicon based light emitters for on-chip optical interconnects. The goal is an enhancement of sub-band-gap or band-to-band radiation by controlled formation of dislocation-rich areas in microelectronics-grade silicon as well as understanding of the processes governing such enhancement. For light emitters based on band-to-band emission it is shown, that internal quantum efficiency of nearly 2 % can be achieved, but the emission is essentially generated in the bulk of the wafer. On the other hand, light emitters utilizing the emission from dislocation-rich areas of a well localized wafer depth were explored. Three different methods for reproducible formation of a dislocation-rich region beneath the wafer surface were investigated and evaluated in view of their room temperature sub-band-gap radiation: (1) silicon implantation

Dislocation confinement in the growth of Na flux GaN on metalorganic chemical vapor deposition-GaN

International Nuclear Information System (INIS)

Takeuchi, S.; Asazu, H.; Nakamura, Y.; Sakai, A.; Imanishi, M.; Imade, M.; Mori, Y.

2015-01-01

We have demonstrated a GaN growth technique in the Na flux method to confine c-, (a+c)-, and a-type dislocations around the interface between a Na flux GaN crystal and a GaN layer grown by metalorganic chemical vapor deposition (MOCVD) on a (0001) sapphire substrate. Transmission electron microscopy (TEM) clearly revealed detailed interface structures and dislocation behaviors that reduced the density of vertically aligned dislocations threading to the Na flux GaN surface. Submicron-scale voids were formed at the interface above the dislocations with a c component in MOCVD-GaN, while no such voids were formed above the a-type dislocations. The penetration of the dislocations with a c component into Na flux GaN was, in most cases, effectively blocked by the presence of the voids. Although some dislocations with a c component in the MOCVD-GaN penetrated into the Na flux GaN, their propagation direction changed laterally through the voids. On the other hand, the a-type dislocations propagated laterally and collectively near the interface, when these dislocations in the MOCVD-GaN penetrated into the Na flux GaN. These results indicated that the dislocation propagation behavior was highly sensitive to the type of dislocation, but all types of dislocations were confined to within several micrometers region of the Na flux GaN from the interface. The cause of void formation, the role of voids in controlling the dislocation behavior, and the mechanism of lateral and collective dislocation propagation are discussed on the basis of TEM results

Posterior Dislocation of the Hip

African Journals Online (AJOL)

than 24 hours, and 13 more than 48 hours after injury. (Table II). TABLE If. RESULTS PLOITED AGAINST DELAY IN. REDUCTION OF THE DISLOCATION. Time from injury. (h). Excellent. Poor and fair. Total. 48. 7. 6. 13. Reduction, as a rule, was effected under general anaes-.

K-wire and tension band wire fixation in treating sternoclavicular joint dislocation.

Science.gov (United States)

Chen, Qing-yu; Cheng, Shao-wen; Wang, Wei; Lin, Zhong-qin; Zhang, Wei; Kou, Dong-quan; Shen, Yue; Ying, Xiao-zhou; Cheng, Xiao-jie; Lv, Chuan-zhu; Peng, Lei

2011-02-01

To evaluate the feasibility and therapeutic effect of treating sternoclavicular joint dislocation by K-wire and tension band wire fixation, and to improve the safety and stability of this technique. This study consisted of 9 cases, 6 males and 3 females with the mean age of 25 years (range, 9-62 years). The causes were traffic accident in 7 cases, falling in 1 case and fight in 1 case. The duration from injury to operation was 2 hours to 7 days. There were 5 left dislocations and 4 right dislocations; 8 anterior dislocations and 1 posterior dislocation, including one combined with left scapular fracture and one with left olecranon fracture. Open reduction and internal fixation using K-wires and tension band wires were performed to treat dislocations. All patients were followed up for 6 to 24 months, 10 months on average. According to Rockwood's rating scale on postoperative sternoclavicular joint, 8 cases achieved excellent outcomes with an average score of 13.88, and the rest case achieved a good outcome with the score of 12. Anatomical reduction was obtained in all cases. There were no such postoperative complications as severe infection, injury to blood vessel and nerve, failure of fixation, etc. Patients were all satisfied with the anatomical reduction and functional recovery. The technique of K-wire and tension band wire fixation is safe, simple, effective, less invasive and has been successfully used in orthopedic surgery. It is effective in treating sternoclavicular joint dislocation though it has some disadvantages.

Plastic dislocation motion via nonequilibrium molecular and continuum dynamics

International Nuclear Information System (INIS)

Hoover, W.G.; Ladd, A.J.C.; Hoover, N.E.

1980-01-01

The classical two-dimensional close-packed triangular lattice, with nearest-neighbor spring forces, is a convenient standard material for the investigation of dislocation motion and plastic flow. Two kinds of calculations, based on this standard material, are described here: (1) Molecular Dynamics simulations, incorporating adiabatic strains described with the help of Doll's Tensor, and (2) Continuum Dynamics simulations, incorporating periodic boundaries and dislocation interaction through stress-field superposition

Structures of glide-set 90 deg. partial dislocation cores in diamond cubic semiconductors

International Nuclear Information System (INIS)

Beckman, S.P.; Chrzan, D.C.

2003-01-01

Two core reconstructions of the 90 deg. partial dislocations in diamond cubic semiconductors, the so-called single- and double-period structures, are often found to be nearly degenerate in energy. This near degeneracy suggests the possibility that both core reconstructions may be present simultaneously along the same dislocation core, with the domain sizes of the competing reconstructions dependent on temperature and the local stress state. To explore this dependence, a simple statistical mechanics-based model of the dislocation core reconstructions is developed and analyzed. Predictions for the temperature-dependent structure of the dislocation core are presented

Low-dislocation-density epitatial layers grown by defect filtering by self-assembled layers of spheres

Science.gov (United States)

Wang, George T.; Li, Qiming

2013-04-23

A method for growing low-dislocation-density material atop a layer of the material with an initially higher dislocation density using a monolayer of spheroidal particles to bend and redirect or directly block vertically propagating threading dislocations, thereby enabling growth and coalescence to form a very-low-dislocation-density surface of the material, and the structures made by this method.

Cortico-cortical communication dynamics

Directory of Open Access Journals (Sweden)

Per E Roland

2014-05-01

Full Text Available IIn principle, cortico-cortical communication dynamics is simple: neurons in one cortical area communicate by sending action potentials that release glutamate and excite their target neurons in other cortical areas. In practice, knowledge about cortico-cortical communication dynamics is minute. One reason is that no current technique can capture the fast spatio-temporal cortico-cortical evolution of action potential transmission and membrane conductances with sufficient spatial resolution. A combination of optogenetics and monosynaptic tracing with virus can reveal the spatio-temporal cortico-cortical dynamics of specific neurons and their targets, but does not reveal how the dynamics evolves under natural conditions. Spontaneous ongoing action potentials also spread across cortical areas and are difficult to separate from structured evoked and intrinsic brain activity such as thinking. At a certain state of evolution, the dynamics may engage larger populations of neurons to drive the brain to decisions, percepts and behaviors. For example, successfully evolving dynamics to sensory transients can appear at the mesoscopic scale revealing how the transient is perceived. As a consequence of these methodological and conceptual difficulties, studies in this field comprise a wide range of computational models, large-scale measurements (e.g., by MEG, EEG, and a combination of invasive measurements in animal experiments. Further obstacles and challenges of studying cortico-cortical communication dynamics are outlined in this critical review.

Damage buildup and edge dislocation mobility in equiatomic multicomponent alloys

Energy Technology Data Exchange (ETDEWEB)

Granberg, F., E-mail: fredric.granberg@helsinki.fi [Department of Physics, P.O. Box 43, FIN-00014 University of Helsinki (Finland); Djurabekova, F. [Department of Physics, P.O. Box 43, FIN-00014 University of Helsinki (Finland); Helsinki Institute of Physics, P.O. Box 43, FIN-00014 University of Helsinki (Finland); Levo, E.; Nordlund, K. [Department of Physics, P.O. Box 43, FIN-00014 University of Helsinki (Finland)

2017-02-15

Highlights: • We studied the damage buildup in equiatomic multicomponent alloys by MD simulations. • Edge dislocation mobility was lower in the studied alloys compared to elemental Ni. • Damage buildup in alloys saturated at lower levels than in elemental Ni. • Initial damage buildup is faster in alloys compared to elemental Ni. - Abstract: A new class of single phase metal alloys of equal atomic concentrations has shown very promising mechanical properties and good corrosion resistance. Moreover, a significant reduction in damage accumulation during prolonged irradiation has also been observed in these equiatomic multicomponent alloys. A comparison of elemental Ni with the two component NiFe- and the three component NiCoCr-alloy showed a substantial reduction in damage in both alloys, and an even larger difference was seen if only larger clusters were considered. One of the factors limiting the damage build-up in the alloys compared to the elemental material was seen to be dislocation mobility (Granberg et al., 2016). In this Article, we focus on a more thorough investigation of the mobility of edge dislocations in different cases of the Ni-, NiFe- and NiCoCr-samples. We find that even though the saturated amount of defects in the alloys is lower than in elemental Ni, the defect buildup in the early stages is faster in the alloys. We also find that the dislocation mobility in NiFe is lower than in Ni, at low stresses, and that the onset stress in NiFe is higher than in Ni. The same phenomenon was seen in comparison between NiFe and NiCoCr, since the three component alloy had lower dislocation mobility and higher onset stress. The dislocation velocity in elemental Ni plateaued out just under the forbidden velocity, whereas the alloys showed a more complex behaviour.

Perineal anterior dislocation of the hip with avulsion fracture of ...

African Journals Online (AJOL)

Traumatic anterior dislocation of the hip is rare even in children. Very uncommon also is the perineal variant of the inferior type of anterior dislocation with concomitant avulsion fracture of the greater trochanter. We report such a case highlighting the peculiarity of its management. No similar case of triumvirate injury of the hip ...

Atomic-scale investigation of point defects and hydrogen-solute atmospheres on the edge dislocation mobility in alpha iron

Energy Technology Data Exchange (ETDEWEB)

Bhatia, M. A.; Solanki, K. N., E-mail: kiran.solanki@asu.edu [School for Engineering of Matter, Transport, and Energy, Arizona State University, Tempe, Arizona 85287 (United States); Groh, S. [Institute of Mechanics and Fluid Dynamics, TU Bergakademie Freiberg, Freiberg 09556 (Germany)

2014-08-14

In this study, we present atomistic mechanisms of 1/2 [111](11{sup ¯}0) edge dislocation interactions with point defects (hydrogen and vacancies) and hydrogen solute atmospheres in body centered cubic (bcc) iron. In metals such as iron, increases in hydrogen concentration can increase dislocation mobility and/or cleavage-type decohesion. Here, we first investigate the dislocation mobility in the presence of various point defects, i.e., change in the frictional stress as the edge dislocation interacts with (a) vacancy, (b) substitutional hydrogen, (c) one substitutional and one interstitial hydrogen, (d) interstitial hydrogen, (e) vacancy and interstitial hydrogen, and (f) two interstitial hydrogen. Second, we examine the role of a hydrogen-solute atmosphere on the rate of local dislocation velocity. The edge dislocation simulation with a vacancy in the compression side of the dislocation and an interstitial hydrogen atom at the tension side exhibit the strongest mechanical response, suggesting a higher potential barrier and hence, the higher frictional stress (i.e., ∼83% higher than the pure iron Peierls stress). In the case of a dislocation interacting with a vacancy on the compressive side, the vacancy binds with the edge dislocation, resulting in an increase in the friction stress of about 28% when compared with the Peierls stress of an edge dislocation in pure iron. Furthermore, as the applied strain increases, the vacancy migrates through a dislocation transportation mechanism by attaining a velocity of the same order as the dislocation velocity. For the case of the edge dislocation interacting with interstitial hydrogen on the tension side, the hydrogen atom jumps through one layer perpendicular to the glide plane during the pinning-unpinning process. Finally, our simulation of dislocation interactions with hydrogen show first an increase in the local dislocation velocity followed by a pinning of the dislocation core in the atmosphere, resulting in

A Rare Case of Neglected Traumatic Anterior Dislocation of Hip in a Child.

Science.gov (United States)

Mootha, Aditya Krishna; Mogali, Kasi Viswanadam

2016-01-01

Post traumatic hip dislocations are very rare in children. Neglected anterior hip dislocations in children are not described in literature so far. Here, we present a case of 6 weeks old anterior hip dislocation successfully managed by open reduction. A 9-year-old male child presented with neglected anterior hip dislocation on left side. Open reduction carried out through direct anterior approach to hip. Congruent reduction is achieved. At final follow up of 1 year, the child had unrestricted activities of daily living and no radiological signs of osteonecrosis or any joint space reduction. There is paucity of literature over neglected post traumatic anterior hip dislocations in children. The treatment options vary from closed reduction after heavy traction to sub trochanteric osteotomy. However, we feel that open reduction through direct anterior approach is the preferred mode of management whenever considered possible.

Unusual inferior dislocation of shoulder: reduction by two-step maneuver: a case report

Directory of Open Access Journals (Sweden)

Patro Dilip K

2009-11-01

Full Text Available Abstract Dislocation of the shoulder is the commonest of all large joint dislocations. Inferior dislocation constitutes 0.5% of all shoulder dislocations. It characteristically presents with overhead abduction of the arm, the humerus being parallel to the spine of scapula. We present an unusual case of recurrent luxatio erecta in which the arm transformed later into an adducted position resembling the more common anterior shoulder dislocation. Such a case has not been described before in English literature. Closed reduction by the two-step maneuver was successful with a single attempt. MRI revealed posterior labral tear and a Hill-Sachs variant lesion on the superolateral aspect of humeral head. Immobilisation in a chest-arm bandage followed by physiotherapy yielded excellent results. The case is first of its kind; the unusual mechanism, unique radiological findings and alternate method of treatment are discussed.

Ab initio study of interaction of helium with edge and screw dislocations in tungsten

Energy Technology Data Exchange (ETDEWEB)

Bakaev, Alexander, E-mail: bakaev_vic@mail.ru [SCK-CEN, Nuclear Materials Science Institute, Boeretang 200, Mol 2400 (Belgium); Department of Experimental Nuclear Physics K-89, Institute of Physics, Nanotechnology and Telecommunications, Peter the Great St. Petersburg Polytechnic University, 29 Polytekhnicheskaya str., 195251 St. Petersburg (Russian Federation); Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden (Germany); Terentyev, Dmitry [SCK-CEN, Nuclear Materials Science Institute, Boeretang 200, Mol 2400 (Belgium); Grigorev, Petr [SCK-CEN, Nuclear Materials Science Institute, Boeretang 200, Mol 2400 (Belgium); Department of Experimental Nuclear Physics K-89, Institute of Physics, Nanotechnology and Telecommunications, Peter the Great St. Petersburg Polytechnic University, 29 Polytekhnicheskaya str., 195251 St. Petersburg (Russian Federation); Ghent University, Applied Physics EA17 FUSION-DC, St. Pietersnieuwstraat, 41 B4, B-9000 Gent (Belgium); Posselt, Matthias [Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden (Germany); Zhurkin, Evgeny E. [Department of Experimental Nuclear Physics K-89, Institute of Physics, Nanotechnology and Telecommunications, Peter the Great St. Petersburg Polytechnic University, 29 Polytekhnicheskaya str., 195251 St. Petersburg (Russian Federation)

2017-02-15

Highlights: • Both screw (SD) and edge dislocations (ED) offer trapping sites for He in tungsten. • He atom is attracted to SD and ED with the interaction energy of ~1.3 and ~3.0 eV, respectively. • The attraction of He to dislocations can contribute to the nucleation of He clusters at high T. - Abstract: The interaction of a single He atom with edge and screw dislocations in tungsten has been studied using ab initio calculations. It was revealed that He is strongly attracted to the core of both dislocations with the interaction energy of −1.3 and −3.0 eV for screw and edge dislocations, respectively, which corresponds to the detrapping temperature in thermal desorption spectroscopy experiments of about 500 K and 1050 K, respectively. The lowest energy positions for He around the dislocation cores are identified and the atomic structures are rationalized on the basis of elasticity theory considerations. Both types of dislocations exhibit a higher binding energy for He as compared to the He-He binding (known as self-trapping) and are weaker traps as compared to a single vacancy. It is, thus, concluded that the strong attraction to dislocation lines can contribute to the nucleation of He clusters in the temperature range which already excludes He self-trapping.

Ab initio study of interaction of helium with edge and screw dislocations in tungsten

International Nuclear Information System (INIS)

Bakaev, Alexander; Terentyev, Dmitry; Grigorev, Petr; Posselt, Matthias; Zhurkin, Evgeny E.

2017-01-01

Highlights: • Both screw (SD) and edge dislocations (ED) offer trapping sites for He in tungsten. • He atom is attracted to SD and ED with the interaction energy of ~1.3 and ~3.0 eV, respectively. • The attraction of He to dislocations can contribute to the nucleation of He clusters at high T. - Abstract: The interaction of a single He atom with edge and screw dislocations in tungsten has been studied using ab initio calculations. It was revealed that He is strongly attracted to the core of both dislocations with the interaction energy of −1.3 and −3.0 eV for screw and edge dislocations, respectively, which corresponds to the detrapping temperature in thermal desorption spectroscopy experiments of about 500 K and 1050 K, respectively. The lowest energy positions for He around the dislocation cores are identified and the atomic structures are rationalized on the basis of elasticity theory considerations. Both types of dislocations exhibit a higher binding energy for He as compared to the He-He binding (known as self-trapping) and are weaker traps as compared to a single vacancy. It is, thus, concluded that the strong attraction to dislocation lines can contribute to the nucleation of He clusters in the temperature range which already excludes He self-trapping.

Calculations of the electron-damping force on moving-edge dislocations

International Nuclear Information System (INIS)

Mohri, T.

1982-11-01

Dynamic effect of a moving dislocation has been recognized as one of essential features of deformation behavior at very low temperatures. Damping mechanisms are the central problems in this field. Based on the free-electron-gas model, the electron-damping force (friction force) on a moving-edge dislocation in a normal state is estimated. By applying classical MacKenzie-Sondheimer's procedures, the electrical resistivity caused by a moving dislocation is first estimated, and the damping force is calculated as a Joule-heat-energy dissipation. The calculated values are 3.63x10 - 6 , 7.62x10 - 7 and 1.00x10 - 6 [dyn sec/cm - 2 ] for Al, Cu and Pb, respectively. These values show fairly good agreements as compared with experimental results. Also, numerical calculations are carried out to estimate magnetic effects caused by a moving dislocation. The results are negative and any magnetic effects are not expected. In order to treat deformation behavior at very low temperatures, a unification of three important deformation problems is attempted and a fundamental equation is derived

Comparing the influence of crestal cortical bone and sinus floor cortical bone in posterior maxilla bi-cortical dental implantation: a three-dimensional finite element analysis.

Science.gov (United States)

Yan, Xu; Zhang, Xinwen; Chi, Weichao; Ai, Hongjun; Wu, Lin

2015-05-01

This study aimed to compare the influence of alveolar ridge cortical bone and sinus floor cortical bone in sinus areabi-cortical dental implantation by means of 3D finite element analysis. Three-dimensional finite element (FE) models in a posterior maxillary region with sinus membrane and the same height of alveolar ridge of 10 mm were generated according to the anatomical data of the sinus area. They were either with fixed thickness of crestal cortical bone and variable thickness of sinus floor cortical bone or vice versa. Ten models were assumed to be under immediate loading or conventional loading. The standard implant model based on the Nobel Biocare implant system was created via computer-aided design software. All materials were assumed to be isotropic and linearly elastic. An inclined force of 129 N was applied. Von Mises stress mainly concentrated on the surface of crestal cortical bone around the implant neck. For all the models, both the axial and buccolingual resonance frequencies of conventional loading were higher than those of immediate loading; however, the difference is less than 5%. The results showed that bi-cortical implant in sinus area increased the stability of the implant, especially for immediately loading implantation. The thickness of both crestal cortical bone and sinus floor cortical bone influenced implant micromotion and stress distribution; however, crestal cortical bone may be more important than sinus floor cortical bone.

On the annealing of the EPR dislocation signal in silicon

International Nuclear Information System (INIS)

Zolotukhin, M.N.; Kveder, V.V.; Osip'yan, Yu.A.

1981-01-01

The annealing kinetics of the (EPR) dislocation signal (D-centers) in silicon is studied. The disappearance of the dislocation EPR signal as a result of annealing is ascribed to rearrangement of the nuclei of the partial dislocations accompanied by pairwise ''closing'' of the broken bonds in the S=0 state. The height of the energy barrier for the rearrangement process is approximately 2 eV. A residual ''nonannealing'' EPR signal is observed in strongly deformed silicon crystals. It resembles an isotropic line with a width approximately 7.5 Oe and a g-factor approximately 2.006. It is suggested that the respective EPR centers (O-centers) are similar to the EPR centers in amorphic silicon [ru

Stage IV work-hardening related to disorientations in dislocation structures

DEFF Research Database (Denmark)

Pantleon, W.

2004-01-01

The effect of deformation-induced disorientations on the work-hardening of metals is modelled based on dislocation dynamics. Essentially, Kocks’ dislocation model describing stage III hardening is extended to stage IV by incorporation of excess dislocations related to the disorientations....... Disorientations evolving from purely statistical reasons — leading to a square root dependence of the average disorientation angle on strain — affect the initial work-hardening rate (and the saturation stress) of stage III only slightly. On the other hand, deterministic contributions to the development...... of disorientations, as differences in the activated slip systems across boundaries, cause a linear increase of the flow stress at large strains. Such a constant work-hardening rate is characteristic for stage IV....

Influence of temperature upon dislocation mobility and elastic limit of single crystal HgI2

International Nuclear Information System (INIS)

Milstein, F.; Farber, B.; Kim, K.; van den Berg, L.; Schnepple, W.

1982-01-01

The practical importance of studying mechanical properties and dislocation structure of HgI 2 is reviewed briefly. Specifically, the performance of single crystal HgI 2 radiation detectors is evidently sensitive to crystalline imperfections; the dislocation structure, in turn, can be altered during detector fabrication, depending upon the mechanical properties of the crystal and the stresses to which the crystal is subjected. The influence of temperature upon dislocation mobility and plasticity in vapor-grown crystals of mercuric iodide is examined. Dislocation mobiity is determined by measuring the lengths of the longest arms of dislocation etch pit rosettes on (001) surfaces following microhardness indentation and chemical etch. Measurements were made in the range from room temperature to the phase transition temperature of 127 0 C. Dislocation mobility was found to be an increasing function of temperature, with the effect accelerating as the phase transition is approached. Increasing temperature was also found to lower the critical resolved shear stress for plastic deformation on slip on (001) planes. In these contexts, the vapor-grown crystals are clearly softer at their elevated growth temperatures. The results are discussed in terms of a dislocation model involving soft and hard glide dislocations

Dislocation of the temporomandibular joint meniscus: contrast arthrography vs. computed tomography

International Nuclear Information System (INIS)

Thompson, J.R.; Christiansen, E.; Sauser, D.; Hasso, A.N.; Hinshaw, D.B. Jr.

1985-01-01

A prospective study to determine the accuracy of computed tomography (CT) for the diagnosis of dislocation of the temporomandibular joint (TMJ) meniscus was made by performing both CT and contrast arthrography on 18 joints suspected of meniscus dislocation. Arthography rather than surgery was chosen as the quality standard for comparing CT findings, as not all patients undergoing the studies underwent surgery. The results of each test were reported independently by the radiologist who obtained either all of the arthograms or all of the CT scans. For dislocation of the meniscus, there were excellent agreement between the two methods. CT seems to be nearly as accurate as arthrography for showing meniscus dislocation, is performed with lower x-ray exposure, and is noninvasive. Arthrograpy discloses more detailed information about the joint meniscus, such as perforation and maceration, and should continue to be used when this kind of information is clinically important

CT findings of traumatic posterior hip dislocation after reduction

International Nuclear Information System (INIS)

Moon, Sung Kyoung; Park, Ji Seon; Ryu, Kyung Nam; Jin, Wook; Jin Wook

2008-01-01

To evaluate the CT images of reduced hips after posterior hip dislocation and to propose specific diagnostic criteria based on the CT results. We retrospectively reviewed the CT findings on 18 reduced hips from 17 patients with radiographs and clinical histories of traumatic posterior hip dislocations by evaluating 18 corresponding CT scans for joint space asymmetry, intra-articular abnormalities (intra-articular fat obliteration, loose bodies, and joint effusion), changes in posterior soft tissue (capsule, muscles, and adjacent fat), the presence, and location of fractures (acetabulum and femoral head). All 18 hips (100%) showed posterior soft tissue changes. In total, 17 hips (94.4%) had intra-articular abnormalities and 15 hips (83.3%) had joint space asymmetries. In addition, 17 hips (94.4%) had fractures involving the acetabula (15 cases, 88.2%) the femoral head (13 cases, 76.5%), or on both sides (11 cases, 64.7%). The most frequent fracture location was in he posterior wall (13/15, 86.7%) of the acetabulum and in the anterior aspect (10/13, 76.9%) of the femoral head. Patients with a prior history of posterior hip dislocation showed specific CT findings after reduction, suggesting the possibility of previous posterior hip dislocations in patients

Isolated posterior dislocation of the radial head in an adult.

Directory of Open Access Journals (Sweden)

Negi A

1992-07-01

Full Text Available Isolated posterior dislocation of the radial head was detected on X-ray in a patient following a vehicular accident. Such a dislocation without an associated fracture is extremely rare in adults. Immobilization of the elbow in full pronation and 90 degrees flexion for 4 weeks normalized the position of the head of the radius.

Rows of Dislocation Loops in Aluminium Irradiated by Aluminium Ions

DEFF Research Database (Denmark)

Henriksen, L.; Johansen, A.; Koch, J.

1967-01-01

Single-crystal aluminium specimens, irradiated with 50-keV aluminium ions, contain dislocation loops that are arranged in regular rows along <110 > directions. ©1967 The American Institute of Physics......Single-crystal aluminium specimens, irradiated with 50-keV aluminium ions, contain dislocation loops that are arranged in regular rows along directions. ©1967 The American Institute of Physics...

A statistical analysis of the elastic distortion and dislocation density fields in deformed crystals

KAUST Repository

Mohamed, Mamdouh S.

2015-05-18

The statistical properties of the elastic distortion fields of dislocations in deforming crystals are investigated using the method of discrete dislocation dynamics to simulate dislocation structures and dislocation density evolution under tensile loading. Probability distribution functions (PDF) and pair correlation functions (PCF) of the simulated internal elastic strains and lattice rotations are generated for tensile strain levels up to 0.85%. The PDFs of simulated lattice rotation are compared with sub-micrometer resolution three-dimensional X-ray microscopy measurements of rotation magnitudes and deformation length scales in 1.0% and 2.3% compression strained Cu single crystals to explore the linkage between experiment and the theoretical analysis. The statistical properties of the deformation simulations are analyzed through determinations of the Nye and Kröner dislocation density tensors. The significance of the magnitudes and the length scales of the elastic strain and the rotation parts of dislocation density tensors are demonstrated, and their relevance to understanding the fundamental aspects of deformation is discussed.

A statistical analysis of the elastic distortion and dislocation density fields in deformed crystals

KAUST Repository

Mohamed, Mamdouh S.; Larson, Ben C.; Tischler, Jon Z.; El-Azab, Anter

2015-01-01

The statistical properties of the elastic distortion fields of dislocations in deforming crystals are investigated using the method of discrete dislocation dynamics to simulate dislocation structures and dislocation density evolution under tensile loading. Probability distribution functions (PDF) and pair correlation functions (PCF) of the simulated internal elastic strains and lattice rotations are generated for tensile strain levels up to 0.85%. The PDFs of simulated lattice rotation are compared with sub-micrometer resolution three-dimensional X-ray microscopy measurements of rotation magnitudes and deformation length scales in 1.0% and 2.3% compression strained Cu single crystals to explore the linkage between experiment and the theoretical analysis. The statistical properties of the deformation simulations are analyzed through determinations of the Nye and Kröner dislocation density tensors. The significance of the magnitudes and the length scales of the elastic strain and the rotation parts of dislocation density tensors are demonstrated, and their relevance to understanding the fundamental aspects of deformation is discussed.

Chronic asymptomatic dislocation of a total hip replacement: a case report

Directory of Open Access Journals (Sweden)

Lidder Surjit

2009-08-01

Full Text Available Abstract Introduction Dislocation of a prosthetic hip is the second most common complication after thromboembolic disease in patients undergoing total hip arthroplasty, with an incidence reported as 0.5 to 20%. Although the period of greatest risk for dislocation has been reported to be within the first few months after surgery, late dislocation occurs more commonly then previously thought. Case presentation A 60-year-old man underwent a right Exeter cemented total hip replacement and was subsequently discharged after appropriate follow-up. He next presented 8 years later complaining of pain in the left groin. An anterioposterior radiograph of the pelvis revealed degenerative changes in the left hip and a dislocated right total hip replacement. The dislocated femoral component had formed a neoacetabulum within the ilium, in which it was freely articulating. He remained pain-free on this side, had 5 cm of true leg length shortening with a good range of movement and was very pleased with his hip replacement. He was later placed on the waiting list for a left total hip replacement. Conclusion This case illustrates that a dislocated total hip replacement may occasionally not cause symptoms that cause significant discomfort or reduction in range of movement. The prosthetic femoral head can form a neoacetabulum allowing a full range of pain-free movement. Furthermore it emphasises that with an increased trend to earlier hospital discharge and shorter follow-up, potential complications may be missed. We urge a low index of suspicion for potential complications and suggest that regular review with radiographic follow-up should be made.

The core structure of a Frank dislocation in Ni3(Al,Nb)

International Nuclear Information System (INIS)

Bonnet, R.; Loubradou, M.; Derder, C.; Catana, A.

1991-01-01

This paper reports on the core structures of dislocations in L1 2 crystals, in view of understanding the anomalous yield behavior of strength with increasing temperature. Theoretical approaches have been proposed for explaining the dissociations of these dislocations, and experimental evidences have been reported for such dissociations using either the weak beam technique or more recently the HRTEM (High Resolution Transmission Electron Microscopy) technique. Recent HRTEM results show that for Ni 3 A1 the partial dislocations 1/2 left-angle 110 right-angle which limit an APB (Antiphase Boundary) lying on (001) are only split over 0.1 - 0.3 nm along (111) planes, producing very high energy CSF's (Complex Stacking Faults) which limit an SISF (superlattice Intrinsic Stacking Fault) extended on a (111) plane. Concerning the 1/2 left-angle 111 right-angle Frank dislocation, which limits an SESF (Superlattice Extrinsic Stacking Fault), there are no reported results yet. Let us note, however, that for aluminum HRTEM images of Frank dislocation loops have been studied. This lack of information in the L1 2 crystals motivated the present HRTEM study

Reply to 'Comment on 'Interaction of a surface wave with a dislocation''

International Nuclear Information System (INIS)

Maurel, Agnes; Pagneux, Vincent; Barra, Felipe; Lund, Fernando

2009-01-01

A subsurface moving dislocation in an elastic half space generates vertical displacements at the free surface. We compare this displacement for two different values of the dislocation viscous drag coefficient. The different resulting surface patterns suggest the free surface plays a decisive dynamical effect. We thus compare this displacement, using the dynamic Green function for an elastic half space, with the result of the calculation using the static Green function for an infinite space, as in the work of Zolotoyabko and Shilo [preceding paper, Phys. Rev. B 80, 136101 (2009), and Shilo and Zolotoyabko, Phys. Rev. Lett. 91, 115506 (2003)] when the dislocation dynamics is the same. Considering the static Green function of an infinite space instead of the correct dynamic Green function of the half space leads to an underestimation of the resulting displacement at the free surface by a factor up to 50 for dislocation depths smaller than one Rayleigh wavelength λ R . We also discuss the constraints that recent ultrasound attenuation and resonant ultrasound spectroscopy experiments place on dislocation parameters, such as density and viscous drag coefficient.

Molecular dynamics simulations of the interaction between 60 deg. dislocation and self-interstitial cluster in silicon

International Nuclear Information System (INIS)

Jing Yuhang; Meng Qingyuan; Zhao Wei

2009-01-01

Molecular dynamics simulations are performed to investigate the interaction between 60 deg. shuffle dislocation and tetrainterstitial (I 4 ) cluster in silicon, using Stillinger-Weber (SW) potential to calculate the interatomic forces. Based on Parrinello-Rahman method, shear stress is exerted on the model to move the dislocation. Simulation results show that the I 4 cluster can bend the dislocation line and delay the dislocation movement. During the course of intersection the dislocation line sections relatively far away from the I 4 cluster accelerate first, and then decelerate. The critical shear stress unpinning the 60 deg. dislocation from the I 4 cluster decreases as the temperature increases in the models.

Molecular dynamics simulation of mode-I-crack propagation and dislocation generation processes in α-Fe

International Nuclear Information System (INIS)

Wang Jianwei; Lu Guocai; Shang Xinchun

2011-01-01