WorldWideScience

Sample records for disenos energeticamente eficientes

  1. Analysis of the methods for the achievement of comfort conditions of humidity and temperature in energetically efficient designs; Analisis de los mtodos para lograr condiciones de confort higrotermico en disenos energeticamente eficientes

    Energy Technology Data Exchange (ETDEWEB)

    Mesa A., N. A.; Morillon G., D. [Division de Estudios de Posgrado de la Facultad de Arquitectura, Universidad Nacional Autonoma de Mexico (Mexico)

    1997-12-31

    , boxeo, basquetbol, voleibol, gimnasia, aerobics y esgrima. Al mismo tiempo se encuesto a sus ocupantes acerca de la sensacion termica que experimentaban al realizar dichas actividades. Los resultados obtenidos en las encuestas se compararon con los reportados por otros investigadores, mediante tablas y diagramas psicometricos, como valores optimos para el confort termico. Como conclusiones se tuvo que los metodos graficos y matenaticos analizados, tienen como base una actividad sedentaria, por lo cual, al utilizarlos para el diseno espacios, de distintas actividades, se presentan condiciones de disconfort, con la consecuente necesidad de aire acondicionado, lo cual implica consumo de energia y el pago de la misma, y por ultimo, es necesario realizar una adaptacion de dichas herramientas, esto es considerar la actividad que se realizara en los edificios.

  2. Analysis of the methods for the achievement of comfort conditions of humidity and temperature in energetically efficient designs; Analisis de los mtodos para lograr condiciones de confort higrotermico en disenos energeticamente eficientes

    Energy Technology Data Exchange (ETDEWEB)

    Mesa A, N A; Morillon G, D [Division de Estudios de Posgrado de la Facultad de Arquitectura, Universidad Nacional Autonoma de Mexico (Mexico)

    1998-12-31

    , boxeo, basquetbol, voleibol, gimnasia, aerobics y esgrima. Al mismo tiempo se encuesto a sus ocupantes acerca de la sensacion termica que experimentaban al realizar dichas actividades. Los resultados obtenidos en las encuestas se compararon con los reportados por otros investigadores, mediante tablas y diagramas psicometricos, como valores optimos para el confort termico. Como conclusiones se tuvo que los metodos graficos y matenaticos analizados, tienen como base una actividad sedentaria, por lo cual, al utilizarlos para el diseno espacios, de distintas actividades, se presentan condiciones de disconfort, con la consecuente necesidad de aire acondicionado, lo cual implica consumo de energia y el pago de la misma, y por ultimo, es necesario realizar una adaptacion de dichas herramientas, esto es considerar la actividad que se realizara en los edificios.

  3. Methodology for bioclimatic design; Metodologia para el diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Morillon Galvez, David [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    A methodology for natural air conditioning of buildings is presented; bioclimatic architecture, in order to contribute to the suitable use of components of the building (walls, ceilings, floors, orientations, etc.) that when interacting with the environment takes advantage of it, without deterioration of the same, obtaining energy efficient designs. As well as an analysis of the elements and factors that the architecture must have to be sustainable; an adequate design to the environment, saving and efficient use of energy, the use of alternating energies by means of ecotechnologies and the self-sufficiency. [Spanish] Se presenta una metodologia para la climatizacion natural de edificios; arquitectura bioclimatica, con el objetivo de aportar al uso adecuado de componentes del edificio (muros, techos, pisos, orientaciones, etc.) que al interactuar con el ambiente tome ventaja de el, sin deterioro del mismo, logrando disenos energeticamente eficientes. Asi como un analisis de los elementos y factores que debe tener la arquitectura para ser sustentable; un diseno adecuado al ambiente, ahorro y uso eficiente de la energia, el uso de energias alternas mediante ecotecnologias y la autosuficiencia.

  4. Energy efficiency and urbanism: Guide for urbanism planning energetically efficiency; Eficiencia energetica y urbanismo: Guia del planeamiento urbanistico energeticamente eficiente

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The present book summarizes the urbanism in the context of energy efficiency. the book has 4 chapters and 3 annexes: The energy in the context of substantiality, the soil planning, recommendations for the urbanism planning with substantiality criteria and small description URBE project.

  5. Dimensionamento de uma bóia marítima energeticamente autossustentável

    OpenAIRE

    Faria, Rui Miguel da Silva de

    2015-01-01

    O principal objetivo deste projeto passou pela modelação e dimensionamento de uma bóia marítima energeticamente autossustentável que fosse capaz de fazer uma recolha e transmissão de dados em alto mar e de produzir a eletricidade através de um aerogerador, armazenando-a em baterias. O aerogerador deve ter capacidade de produção suficiente para alimentar um equipamento designado por Manta, um equipamento de recolha de dados que comunica remotamente com vários operadores, que ...

  6. Intelligent buildings vs. bioclimatic design; Edificios inteligentes vs. diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Aguayo Gonzalez, Ricardo [Tecnologico de Monterrey (Mexico)

    2006-10-15

    Present the form of intelligent buildings designing is the article purpose. Those kinds of edifications take advantage of climatic conditions which allow the users comfort and the efficient electric power use, avoiding the polluting agents. It also shows the four next following stages to design an intelligent building to know: the dry weather and relative dampness schedule variations during a year in the building location; the predominant winds direction, intensity and schedule frequency; the cloudiness, rain, etc and how to use the Givoni diagram to obtain the natural air-conditioning strategies and reach the thermal comfort. [Spanish] El proposito de este articulo es presentar la forma de disenar edificios Inteligentes, los cuales aprovechan las condiciones climaticas que permiten el confort de los usuarios y el uso eficiente de la energia electrica, evitando asi la emision de agentes contaminantes. Tambien menciona los siguientes cuatro pasos para el diseno de un edificio inteligente: conocer las variaciones horarias de temperatura seca y humedad relativa durante un ano en el lugar donde estara el edificio, saber la direccion, intensidad y frecuencia horaria de los vientos dominantes, tener conocimiento de la nubosidad, lluvia, etc. y utilizar el diagrama de Givoni para obtener las estrategias de climatizacion natural para obtener el confort termico.

  7. Industrial stacks design; Diseno de chimeneas industriales

    Energy Technology Data Exchange (ETDEWEB)

    Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

  8. Industrial stacks design; Diseno de chimeneas industriales

    Energy Technology Data Exchange (ETDEWEB)

    Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

  9. Bioclimatic analysis and its impact within the design methodology; Analisis bioclimatico y su impacto dentro de la metodologia de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes Fleixanet, Victor A; Rodriguez Viqueira Manuel [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D.F(Mexico)

    2000-07-01

    el objetivo de facilitar el trabajo del disenador para que el producto arquitectonico final tenga una respuesta mas armonica con el medio ambiente, ofrezca condiciones de bienestar integral a sus ocupantes y sea eficiente en el manejo de los recursos. Asi mismo se busca definir las herramientas de analisis, diseno y evaluacion necesarias para que la aplicacion de la metodologia sea clara, sencilla y que pueda ser llevada a cabo por cualquier disenador, aunque no posea conocimientos profundos de diseno bioclimatico.

  10. Uso Eficiente y Sustentable del agua. Implicancias y Condicionantes

    Directory of Open Access Journals (Sweden)

    Miguel Mathus Escorihuela

    2013-12-01

    Full Text Available El agua no es un recurso natural más, es un recurso vital que permite explicar integralmente los ciclos de la naturaleza y las interacciones entre las especies y el medio en que habitan en virtud del ciclo hidrológico. Pero el agua resiste al hombre, por lo que su aprovechamiento exige acciones concretas, que deben ser racionales y servir al bienestar de la sociedad, para poder alcanzar lo que hoy se llama calidad de vida en un ambiente sano. Para ello, el agua requiere de la Política Hídrica donde se determinan los fines; de la Planificación Hídrica racional y coherente que se encuentre volcada en Planes, Etapas y Programas; de la Legislación, que brinde el marco normativo, de la Administración que lleve a cabo la Política de la Gestión que es el ámbito neurálgico vinculado al uso eficiente del agua

  11. Towards a sustainable architecture: Adequate to the environment and of maximum energy efficiency; Hacia una arquitectura sustentable: adecuada al ambiente y de maxima eficiencia energetica

    Energy Technology Data Exchange (ETDEWEB)

    Morillon Galvez, David [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

    1999-07-01

    An analysis of the elements and factors that the architecture of buildings must have to be sustainable, such as: a design adequate to the environment, saving and efficient use of alternate energies, and the auto-supply is presented. In addition a methodology for the natural air conditioning (bioclimatic architecture) of buildings, as well as ideas for the saving and efficient use of energy, with the objective of contributing to the adequate use of components of the building (walls, ceilings, floors etc.), is presented, that when interacting with the environment it takes advantage of it, without deterioration of the same, obtaining energy efficient designs. [Spanish] Se presenta un analisis de los elementos y factores que debe tener la arquitectura de edificios para ser sustentable, como; un diseno adecuado al ambiente, ahorro y uso eficiente de la energia, el uso de energias alternas y el autoabastecimiento. Ademas se propone una metodologia para la climatizacion natural (arquitectura bioclimatica) de edificios, asi como ideas para el ahorro y uso eficiente de energia, con el objetivo de aportar al uso adecuado de componentes del edificio (muros, techos, pisos etc.) que al interactuar con el ambiente tome ventaja de el, sin deterioro del mismo, logrando disenos energeticamente eficientes.

  12. Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

    Energy Technology Data Exchange (ETDEWEB)

    Patlan Frausto, Jose O; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

  13. Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

    Energy Technology Data Exchange (ETDEWEB)

    Patlan Frausto, Jose O.; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

  14. Integral system for computer aided design of power line transmission towers; Sistema integral para el diseno asistido por computadora de torres de transmision

    Energy Technology Data Exchange (ETDEWEB)

    Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.

  15. Integral system for computer aided design of power line transmission towers; Sistema integral para el diseno asistido por computadora de torres de transmision

    Energy Technology Data Exchange (ETDEWEB)

    Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.

  16. Design and construction of an electrolyte PEM test; Diseno y construccion de un electrolizador PEM de prueba

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Huerta, R. G.; Santillan-Aragon, G. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: rosgonzalez_h@yahoo.com.mx; Solorza-Feria, O. [CINVESTAV-IPN, Mexico D.F. (Mexico)

    2009-09-15

    The use of hydrogen as a fuel is directly linked to its efficient and clean production. One of the most promising methods is water electrolysis, which coupled with a renewable energy source prevents the emission of pollutants into the atmosphere. If a proton exchange membrane (PEM) electrolysis is used, a highly pure hydrogen is produced, ready to be used in a fuel battery. Many studies and investigations in this area concentrate on finding different stable and selective electrocatalysts for the cathode reaction (production of hydrogen) and anode reaction (production of oxygen). To conduct these studies, equipment is needed to perform electrochemical studies and determine the stability and performance of different electrocatalysts. This work presents the design and construction of an a PEM electrolysis test to determine the performance of different anode electrocatalysts. Its active area is 4 cm{sup 2}, its structure is graphite and the current distribution mesh is made of stainless steel. Its performance was determined using as electrocatalysts 10% Pt/C E-tek® anodes and a 50%-50%, 25%-75% and 75%-25% combination of RuO{sub 2}-IrO{sub 2}. The authors wish to thank the ICYTDF (PICS08-37) for financial support and IPN (SIP-20090433) and architect Nestor Romero for the electrolysis machining. [Spanish] La utilizacion del hidrogeno como combustible esta ligado directamente a su produccion eficiente y limpia, uno de los metodos mas prometedores es la electrolisis del agua, ya que acoplado con una fuente de energia renovable se evita la emision de contaminantes a la atmosfera. Si se utiliza un electrolizador de membrana de intercambio protonico (Tipo PEM), el hidrogeno que se produce es de alta pureza, listo para ser utilizado en una pila de combustible. Muchos estudios e investigaciones en esta area se concentran en encontrar distintos electrocatalizadores estables y selectivos para la reaccion catodica (produccion de hidrogeno) y anodica (produccion de oxigeno). Para

  17. Feed-water heaters alternative design comparison; Comparacion de disenos alternativos de calentadores

    Energy Technology Data Exchange (ETDEWEB)

    Torres Toledano, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    A procedure is presented for the alternative design comparison of feed water heaters, based in the failure records of damaged tubes during operation. The procedure is used for cases in which non-continuous or random inspections are made to the feed-water heaters. [Espanol] Se presenta un procedimiento para comparar disenos alternativos de calentadores, basandose en los registros de fallas de los tubos rotos acumuladas durante su operacion. El procedimiento se emplea para casos en los que se realizan inspecciones a los calentadores no continuas, ya sea periodicas o al azar.

  18. System programs design of motors; Sistema de programas de diseno de motores

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Gonzalez Palomas, Oscar; Ciprian Avila, Fernando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    This paper describes the objective of creating the program system for induction motors design SIPRODIMO, its scope, its general characteristics, its structure and the results obtained with its application, as well as the service capacity developed by the Motors Area of the Instituto de Investigaciones Elctricas. [Espanol] En este articulo se describe el objetivo de crear el sistema de programas de diseno de motores de induccion, Siprodimo, su alcance, sus caracteristicas generales, su estructura y los resultados obtenidos con su aplicacion, asi como la capacidad de servicio desarrollada por el area de motores, del Instituto de Investigaciones Electricas.

  19. La falta de financiacion publica hipoteca el futuro del acelerador de protones valenciano. La Universidad de Valencia tiene avanzado el diseno de este dispositivo de alta tecnologia

    CERN Multimedia

    Jatvia, J M

    2002-01-01

    "La Universidad de Valencia tiene avanzado el diseno de un acelerador lineal de protones, cuya culminacion depende del compromiso del Consell en sufragar la plantilla que necesitaria el centro para estar operativo" (1 page).

  20. Environmental psychology in the bioclimatic design; La psicologia ambiental en el diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Cubillas Talamante, Lorena Gpe [Facultad de Arquitectura, Universidad Autonoma de Baja California, Mexicali, Baja California (Mexico)

    2005-07-01

    The bioclimatic design profits of the natural resources for the improvement of the construction quality as well as the user's life. The combination of these two concepts within the architectonic design generates an interesting duality to consider within the understanding of the user's physical and psychological environment and the obtaining of a correlation of reality and dreams. Environmental psychology is focused on the researching of the psychological effects of the architectonic environment on the human experience and behavior. Human behavior works under parameters established during its development. Through the habits and styles of life practiced in childhood those parameters establish themselves to later on obtain satisfiers in the search of the life quality of human beings. [Spanish] El diseno bioclimatico aprovecha los recursos naturales para el mejoramiento de la calidad de la construccion y vida del usuario. La combinacion de estos dos conceptos dentro del diseno arquitectonico, genera dualidad interesante de entender el medio ambiente fisico y psicologico de los usuarios y obtener una identificacion entre la realidad y los suenos. La psicologia ambiental se ha enfocado a investigar sobre la relacion de los efectos psicologicos del ambiente construido o arquitectonico sobre la conducta y la experiencia humana. La conducta humana trabaja bajo parametros establecidos durante el desarrollo del mismo, a traves de los habitos y estilos de vida desde su infancia van marcando esos parametros que despues sirven para lograr satisfactores en la busqueda de la calidad de vida de los seres humanos.

  1. Environmental psychology in the bioclimatic design; La psicologia ambiental en el diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Cubillas Talamante, Lorena Gpe [Facultad de Arquitectura, Universidad Autonoma de Baja California, Mexicali, Baja California (Mexico)

    2005-07-01

    The bioclimatic design profits of the natural resources for the improvement of the construction quality as well as the user's life. The combination of these two concepts within the architectonic design generates an interesting duality to consider within the understanding of the user's physical and psychological environment and the obtaining of a correlation of reality and dreams. Environmental psychology is focused on the researching of the psychological effects of the architectonic environment on the human experience and behavior. Human behavior works under parameters established during its development. Through the habits and styles of life practiced in childhood those parameters establish themselves to later on obtain satisfiers in the search of the life quality of human beings. [Spanish] El diseno bioclimatico aprovecha los recursos naturales para el mejoramiento de la calidad de la construccion y vida del usuario. La combinacion de estos dos conceptos dentro del diseno arquitectonico, genera dualidad interesante de entender el medio ambiente fisico y psicologico de los usuarios y obtener una identificacion entre la realidad y los suenos. La psicologia ambiental se ha enfocado a investigar sobre la relacion de los efectos psicologicos del ambiente construido o arquitectonico sobre la conducta y la experiencia humana. La conducta humana trabaja bajo parametros establecidos durante el desarrollo del mismo, a traves de los habitos y estilos de vida desde su infancia van marcando esos parametros que despues sirven para lograr satisfactores en la busqueda de la calidad de vida de los seres humanos.

  2. Las condiciones de Kuhn y Tucker en el cálculo de fronteras eficientes

    Directory of Open Access Journals (Sweden)

    Liern, Vicente

    2009-01-01

    Full Text Available Presentamos un algoritmo que combina el uso de las condiciones de Kuhn y Tucker con procedimientos heurísticos para calcular la frontera eficiente del problema de selección de cartera con variables semicontinuas y cualquier conjunto adicional de restricciones lineales. También permite incorporar otras clases de restricciones, como las de cardinalidad. Para instancias pequeñas se convierte en un algoritmo exacto. De este modo se pueden detectar muchas irregularidades de la frontera eficiente que pueden ser útiles al inversor para determinar su nivel de rentabilidad deseado. ABSTRACT We present an algorithm that combines the use of the Kuhn-Tucker conditions with heuristical procedures to calculate the efficient frontier of the semicontinuous variable constrained portfolio selection problem with any additional set of linear constraints. Other kinds of constraints can also be added, such as cardinality constraints. For small instances, it becomes an exact algoritm. In this way, many irregularities of the efficient frontier are detected that can be useful to the investor to select a desired return level.

  3. Cost-benefit of energy saving in bioclimatic designs; Costo-beneficio del ahorro de energia en los disenos bioclimatios

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A. [Doble dos soluciones de Negocios (Mexico); Morillon G, David; Rdriguez V, Luis [Universidad Autonoma de Mexico (Mexico)

    2001-06-01

    Tools and criteria for Cost-Benefit Analysis (ACB) of energy saving in bioclimatic designs (DB) are presented, for which a reference project is established. Based on the traditional design of air conditioning of a building and with the support of this one, the estimation of costs and benefits of the same building is made; but with passive systems. The tools used consider related resources such as time and money. Criteria are used such as: Present value (VP), Equivalent Annual Cost (EAC) and the Cost of the conserved Energy (CEC). The costs related to the construction, maintenance and operation of the design are taken into consideration. The differences between the design of reference and the Bioclimatic Design, established from the application of these criteria, allow evaluating the economic margin as far as operation and maintenance. Finally, the cost of the conserved energy of the bioclimatic measures is evaluated as an initiative for energy saving and calculates the present value from them in all of the period of useful life of the bioclimatic design. [Spanish] Se presentan herramientas y criterios para el analisis Costo-Beneficio (ACB) del ahorro de energia en los disenos bioclimaticos (DB), para lo cual se establece un proyecto de referencia. Basado en el diseno tradicional de la climatizacion de un edificio y con apoyo en este, se realiza la estimacion de costos y beneficios del mismo edificio; pero con sistema pasivos. Las herramientas usadas consideran recursos relacionados como son tiempo y dinero. Se usan criterios tales como: Valor Presente (VP), Costo Anual Equivalente (CAE) y el Costo de la Energia conservada (CEC). Se toman en consideracion los costos relacionados con la construccion, mantenimiento y operacion del diseno. Las diferencias entre el diseno de referencia y el Diseno Bioclimatico, establecidas a partir de la aplicacion de estos criterios, permiten evaluar el margen economico en cuanto a la operacion y el mantenimiento. Finalmente, se

  4. Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.

  5. Design of earth network in electric substations; Diseno de redes de tierra en subestaciones electricas

    Energy Technology Data Exchange (ETDEWEB)

    Raull-Martin, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2000-09-01

    The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as web as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presentan los terrenos con diversas caracteristicas fisicas. Asi mismo, se solucionan ejercicios ilustrativos a lo largo del articulo.

  6. Voltage controller design for air conditioning; Diseno de controlador de voltaje para aire acondicionado

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Andrade, R; Lopez Villalobos, J.J; Valderrama Chairez, J; Ramirez, R.L. [Instituto Tecnologico de Nuevo Leon, Guadalupe, Nuevo Leon (Mexico)]. E-mails: roxana_garciaandrade@yahoo.com; xe2n@yahoo.com.mx; jose.valderrama@ieee.org

    2013-03-15

    This paper discusses the design of a voltage controller for an air conditioning system in order to generate additional power in activation or startup of the system, for which as a first stage is presented the modeling power generation of electric current through alternative means, such as solar energy. The results of this study will be the basis for development of the physical prototype of this system controller. [Spanish] El presente trabajo trata sobre el diseno de un controlador de voltaje para un sistema de aire acondicionado con el fin de generar energia adicional en la activacion o arranque de dicho sistema, para lo cual como primer fase se presenta el modelado de la generacion de corriente electrica mediante medios alternos, como lo es la energia solar. Los resultados de este trabajo seran la base para desarrollo del prototipo fisico de este sistema controlador.

  7. Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.

  8. Energy savings in buildings through the architectonic design; Ahorro de energa en edificaciones a traves de diseno arquitectonico

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa Castrejon, A. [Universidad Autnoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Laboratorio de Arquitectura Bioclimatica (Mexico)

    1997-12-31

    This paper points out the problems the existing buildings have in its architectonic design and alternatives presented to improve their habitability and energy consumption, making reference to national cases and to the social-economic environment of our country. [Espanol] El presente trabajo senala los problemas que tienen las edificaciones actuales en su diseno arquitectonico y las alternativas que se presentan para mejorar su habitabilidad y consumo energetico, haciendo referencia a los casos nacionales y al entorno socioeconmico de nuestro pas.

  9. Energy savings in buildings through the architectonic design; Ahorro de energa en edificaciones a traves de diseno arquitectonico

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa Castrejon, A [Universidad Autnoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Laboratorio de Arquitectura Bioclimatica (Mexico)

    1998-12-31

    This paper points out the problems the existing buildings have in its architectonic design and alternatives presented to improve their habitability and energy consumption, making reference to national cases and to the social-economic environment of our country. [Espanol] El presente trabajo senala los problemas que tienen las edificaciones actuales en su diseno arquitectonico y las alternativas que se presentan para mejorar su habitabilidad y consumo energetico, haciendo referencia a los casos nacionales y al entorno socioeconmico de nuestro pas.

  10. Mercados eficientes e arbitragem: um estudo sob o enfoque das finanças comportamentais

    Directory of Open Access Journals (Sweden)

    Tarcísio Saraiva Rabelo Junior

    2004-04-01

    Full Text Available A Hipótese dos Mercados Eficientes (HME tem se mostrado uma das mais influentes teorias no campo das finanças, sendo base para inúmeros modelos de precificação de ativos, com aplicações que vão desde modelos tradicionais utilizados em Finanças Corporativas até avançadas teorias utilizadas na identificação do preço "justo" de derivativos financeiros. Um dos pilares da HME é a possibilidade da arbitragem como mecanismo de correção de possíveis desvios que o mercado possa sofrer de sua forma eficiente.Pela teoria clássica dos mercados eficientes, mesmo em um ambiente caracterizado pela presença de alguns investidores não totalmente racionais, a possibilidade de arbitragem anularia o efeito destes nos preços dos ativos negociados, trazendo-os de volta ao seu valor fundamental. Um campo relativamente novo e de crescente importância das finanças, denominado Finanças Comportamentais, tem mostrado, entretanto, que nos mercados reais a possibilidade de arbitragem é, muitas vezes, custosa e não passível de realização, comprometendo sua utilização como ferramenta reguladora do mercado e, até mesmo, a definição clássica de sua eficiência, que é a de refletir corretamente nos preços as informações existentes sobre os ativos financeiros. Este trabalho aborda a importância da arbitragem para a HME, discutindo seus aspectos teóricos. Posteriormente, são levantados, através de uma abordagem derivada das Finanças Comportamentais, os principais problemas existentes quanto à sua efetiva utilização nos mercados reais e as conseqüências destes para a HME.The Efficient Market Hypothesis (EMH has revealed to be one of the most influential theories in finance and constitutes the basis for countless asset pricing models. Its applications range from traditional Corporate Finance models to advanced theories, used to identify the just price of financial derivatives. One of the EMH pillars is the possibility of arbitration

  11. LA GESTIÓN POR PROCESOS: UN ENFOQUE DE GESTIÓN EFICIENTE

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Mallar

    2010-01-01

    Full Text Available Cada vez más se observan los esfuerzos orientados a adecuar las organizaciones al complejo escenario en que se mueven. Cambios de reglas de juego, incremento de la competencia, apertura al mundo a través de la tecnología, hacen al cliente mucho más exigente, modificando sus demandas y necesidades.La Gestión basada en los Procesos, surge como un enfoque que centra la atención sobre las actividades de la organización, para optimizarlas.En este trabajo se considerará a la organización como una red de procesos interrelacionados o interconectados, donde la estructura organizativa vertical clásica, eficiente a nivel de funciones, se orienta hacia una concepción horizontal, desplazándose el centro de interés desde las estructuras hacia los procesos, como metodología para mejorar el rendimiento, concentrándose en el diseño disciplinado y cuidadosa ejecución de todos los procesos de una organización.Concluyendo, la metodología de aplicación de la Gestión basada en Procesos se trata de una herramienta de gestión adecuada para el momento actual, constituyéndose con fuerza como una alternativa exitosa para la obtención de resultados cada vez mejores.

  12. Diseño integrado para viviendas energéticamente eficientes en Chile: Enhebrando capacidades

    Directory of Open Access Journals (Sweden)

    Underlea Miotto Bruscato

    2011-12-01

    Full Text Available El diseño integrado es una estrategia para desarrollar proyectos de arquitectura sustentable, incorporando trabajo multidisciplinario y evaluaciones de desempeño, que ha demostrado ser un aporte relevante en la ejecución de edificios públicos de países desarrollados. Este artículo presenta la revisión de aspectos de diseño integrado para la elaboración de viviendas energéticamente eficientes en la zona sur de Chile, destinadas en particular a la reconstrucción post terremoto del 27 de Febrero del 2010. Realizando primeramente una síntesis de características de los procesos de diseño integrado, sus condiciones implícitas, participantes, etapas, recursos y resultados esperados según referencias internacionales. Luego se contrasta con la práctica regular de diseño de viviendas en Chile según la regulación vigente y entrevistas a profesionales. Posteriormente se analizan procesos de diseños de casas experimentales y conjuntos habitacionales particularmente enfocados al desempeño energético, realizando seguimientos y entrevistas para revisar aspectos significativos. Identificando algunas consideraciones y recursos relevantes aplicados en el diseño de las viviendas que permitieron el logro de mejoramientos ambientales.

  13. La cooperación, una estrategia eficiente en el origen evolutivo de nuestra especie

    Directory of Open Access Journals (Sweden)

    Julia Sandra Bernal Crespo

    2012-01-01

    Full Text Available Este artículo propone la hipótesis de que la cooperación en forma de altruismo recíproco generalizado ejerció un papel esencial en el origen biosocial de nuestra especie. Al igual que en otras especies en que bajo condiciones adversas los individuos que se asociaron de forma permanente e incrementaron su eficacia biológica, en el origen de nuestra especie mamífera, primate y gregaria, los individuos con patrones de comportamiento de inversión parental, selección de parentesco y altruismo recíproco se coseleccionaron e incrementaron su eficacia biológica tanto a nivel individual como grupal. Propongo, además, que de las interacciones cooperativas reiteradas entre todos los individuos que son interdependientes surgió un patrón de organización social igualitario de estructuras simétricas, que resultó eficiente al conjugar los intereses individuales y colectivos, y que se mantuvo en equilibrio dinámico con mecanismos de regulación y control de aquellas conductas que pudieron desestabilizar el orden social.

  14. Métodos, procedimientos y estrategias para memorizar: reflexiones necesarias para la actividad de estudio eficiente

    Directory of Open Access Journals (Sweden)

    Modesta López Mejías

    Full Text Available El desarrollo de la actividad de estudio a partir de niveles de eficiencia cada vez mayores constituye un requisito indispensable para el tránsito de los estudiantes por la Educación Superior. De igual forma representa un reto para los docentes en el diseño del proceso enseñanza- aprendizaje. En este empeño es necesario prestar atención a los métodos, procedimientos y estrategias que permitan al estudiante la adopción de una posición reflexiva e independiente en la búsqueda del conocimiento, su actualización y aplicación en la diversidad de tareas de estudio que como parte de su formación integral deben realizar. En ello resulta importante el análisis de las vías que favorecen un mejor funcionamiento de la memoria como proceso cognoscitivo fundamental. El presente artículo ofrece elementos teóricos y metodológicos esenciales que pueden servir de guía a docentes y estudiantes en la regulación y autorregulación de los procesos mnémicos desde la perspectiva del estudio eficiente, aspectos que no siempre son valorados en correspondencia con los aportes teóricos existentes.

  15. Control structures design for fossil power station units; Diseno de estructuras de control para unidades termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Palomares Gonzalez, Daniel; Ricano Castillo, Juan Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    In this paper are designed an analyzed the control ties of a 300MW fossil unit at different operation levels. The design and analysis were developed on an operation range of 50% to 100% load. The main control ties were studied among which are the feedwater flow, the superheating zone temperatures and the generated output. The technique used for the design is the decomposition in singular values (DSV) of the plant transference matrix. This is a recent technique that permits finding the most important interactions among output-input variables, over a significative frequencies range for the transference matrix of the plant. For this purpose utilizes the control properties of the transference matrix, such as: control effort, output-input interaction and ruggedness with respect to uncertainties. The control structures obtained were tested in a digital model of a fossil plant unit. A comparison study of both structures (original and modified) showed enhancement in the performance of the power plant with modified structure. [Espanol] En este trabajo se disenan y analizan los lazos de control de una unidad termoelectrica de 300 MW, a diferentes niveles de operacion. El diseno y analisis se desarrollo sobre un rango de operacion de 50 a 100 por ciento de carga. Se estudiaron los principales lazos de control entre los que se encuentran el flujo de agua de alimentacion, las temperaturas de la zona de sobrecalentamiento y la potencia generada. La tecnica utilizada para el diseno es la descomposicion en valores singulares (DVS) de la matriz de transferencia de la planta. Esta es una tecnica reciente que permite encontrar las interacciones mas importantes entre variables entrada-salida, sobre un rango de frecuencias significativas para la matriz de transferencia de la planta. Utiliza para ello las propiedades de control de la matriz de transferencia, como son: esfuerzo de control, interaccion entrada-salida y robustez con respecto a incertidumbres. Las estructuras de control

  16. Control structures design for fossil power station units; Diseno de estructuras de control para unidades termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Palomares Gonzalez, Daniel; Ricano Castillo, Juan Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    In this paper are designed an analyzed the control ties of a 300MW fossil unit at different operation levels. The design and analysis were developed on an operation range of 50% to 100% load. The main control ties were studied among which are the feedwater flow, the superheating zone temperatures and the generated output. The technique used for the design is the decomposition in singular values (DSV) of the plant transference matrix. This is a recent technique that permits finding the most important interactions among output-input variables, over a significative frequencies range for the transference matrix of the plant. For this purpose utilizes the control properties of the transference matrix, such as: control effort, output-input interaction and ruggedness with respect to uncertainties. The control structures obtained were tested in a digital model of a fossil plant unit. A comparison study of both structures (original and modified) showed enhancement in the performance of the power plant with modified structure. [Espanol] En este trabajo se disenan y analizan los lazos de control de una unidad termoelectrica de 300 MW, a diferentes niveles de operacion. El diseno y analisis se desarrollo sobre un rango de operacion de 50 a 100 por ciento de carga. Se estudiaron los principales lazos de control entre los que se encuentran el flujo de agua de alimentacion, las temperaturas de la zona de sobrecalentamiento y la potencia generada. La tecnica utilizada para el diseno es la descomposicion en valores singulares (DVS) de la matriz de transferencia de la planta. Esta es una tecnica reciente que permite encontrar las interacciones mas importantes entre variables entrada-salida, sobre un rango de frecuencias significativas para la matriz de transferencia de la planta. Utiliza para ello las propiedades de control de la matriz de transferencia, como son: esfuerzo de control, interaccion entrada-salida y robustez con respecto a incertidumbres. Las estructuras de control

  17. Sondeo compresivo aplicado al sondeo de espectro de banda ancha eficiente en sistemas de radio cognitivo

    Directory of Open Access Journals (Sweden)

    Evelio Astaiza Hoyos

    2017-01-01

    Full Text Available Contexto: El sondeo de espectro es universalmente conocido como el principal habilitador de radio cognitivo (CR, dado que dota al dispositivo de CR de la capacidad de conocimiento del entorno de radio. Objetivo: En este artículo se presenta un algoritmo diseñado para realizar el sondeo de espectro de banda ancha en sistemas de radio cognitivo (CR. Método: El sondeo de espectro está basado en sondeo compresivo (CS, mediante el cual los usuarios cognitivos, sin necesidad de conocimiento a priori de características de la señal en el entorno de radio, minimizan la cantidad de muestras a procesar y, con ello, reducen de forma proporcional los tiempos de detección, consumos de energía y capacidades de procesamiento requeridas en los dispositivos de radio cognitivo (CRD. Resultados:  El desempeño del algoritmo propuesto se evalúa mediante la obtención de las curvas de probabilidad de detección, probabilidad de omisión de detección, probabilidad de falsa alarma y las características operativas del receptor (ROC en comparación con otros algoritmos propuestos en el estado del arte. Conclusión: Los resultados de simulación demuestran que el método propuesto permite realizar el sondeo de espectro de manera eficiente, mejorando el desempeño del sondeo en función de la probabilidad de detección y de las características operacionales del receptor con respecto a otros algoritmos propuestos basados en muestreo sub-Nyquist.

  18. System for the design of electrical distribution substations; Sistema para el diseno de subestaciones electricas de distribucion

    Energy Technology Data Exchange (ETDEWEB)

    Zayas Perez, Benjamin Eddie; Islas Perez, Eduardo; Bahena Rada, Jessica Liliana; Romero Lima, Jesus [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Sierra Rodriguez, Benjamin; Moreno Diaz, Humberto [Comision Federal de Electricidad (Mexico)

    2011-07-01

    The physical design of electric substations involves a variety of activities, such as developing, reviewing and performing modifications to different design proposals, estimating costs and producing documents to be integrated into an executive project. These activities are usually conducted at the Distribution Divisions of the Federal Electric Commission (CFE) through two separate processes: the development of engineering plans with computer-aided design software (CAD) and volumetric calculations for the initial budget using conventional spreadsheets. The documents are manually developed on an individual basis, without the existence of any functions to allow for automatically updating the design modifications of any of the plans. The corresponding initial budget becomes a lengthy and laborious process with the likelihood of inconsistencies among the documents. In order to optimize the design process for the public and electromechanical works of electric substations (ES) in a three-dimensional (3D) graphic environment, the IIE's Management of Process Supervision, in coordination with the CFE Distribution Subdivision, developed the System for the Design of Electric Substation Distribution (SDESD). This system makes use of the advantages of CAD3D technology to develop detail engineering, cost engineering to calculate initial budgets and virtual reality for three-dimensional interactive navigation. It is worth mentioning that this system is currently in the implementation phase at the CFE Distribution Subdivision. This article briefly describes the main stages in the development of the project, as well as the functioning and principal components of the system. [Spanish] El diseno fisico de subestaciones electricas implica una variedad de actividades, tales como elaborar, revisar y efectuar modificaciones de diferentes propuestas de diseno, estimar costos y producir documentos, para integrarlos como parte de un proyecto ejecutivo. Estas actividades usualmente se

  19. Análisis económico de la ruptura eficiente en vínculos matrimoniales ineficientes

    Directory of Open Access Journals (Sweden)

    John Alberto Tito Añamuro

    2014-01-01

    Full Text Available Este trabajo estudia cuál es la estrategia de incentivos que necesitan dos personas para alcanzar las ventajas de una ruptura eficiente, partiendo de la hipótesis de que el vínculo matrimonial es, desde el mercado del matrimonio, ineficiente y, por tanto, genera en la relación y en el entorno familiar más perjuicios que beneficios.

  20. Optimización global eficiente y efectiva en la inversión de datos de campos potenciales

    Directory of Open Access Journals (Sweden)

    Pedro G. Junco-Bernázar

    2003-03-01

    Full Text Available Los problemas inversos de campos potenciales son difíciles de resolver utilizando métodos automáticos, sobre todo por la incapacidad de los procedimientos tradicionales de localizar globalmente el conjunto óptimo de los parámetros. Este artículo establece la naturaleza de los múltiples óptimos locales en la inversión de datos de campos potenciales en un modelo de seis parámetros y analiza la consistencia de tres métodos de optimización global: un método de multicomienzo con el algoritmo Simplex (MSX, un algoritmo genético combinado con el Simplex (GSX y el método de Evolución y Mezcla de Complejos (SCE. Todos los algoritmos fueron capaces de encontrar el conjunto de parámetros óptimos durante el proceso de inversión de campo potencial para un modelo de seis parámetros. En 100 pruebas independientes de cada algoritmo, el procedimiento del SCE se comporta tres veces más eficiente que el procedimiento MSX y dos veces más eficiente que el procedimiento GSX. El método GSX es dos veces más eficiente que el procedimiento MSX.

  1. Social and environmental impact of the bioclimatic design; Impacto social y ambiental del diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A; Morrillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    This article is about two important scopes of the Bioclimatical Design (BD), the Social scope and the environmental scope. As an introduction, it is justified the importance of this topic through the association of the BD in the context of sustainability with our country's economic model. The analysis is done under the perspective of effects of the BD on social and environmental scopes. In social scope is used the Cost and Benefit Analysis according to social evaluation. In environmental scope, effects in water, air and ground are studied, but the measurement is done according to the emissions reduction of CO{sub 2} on atmosphere because of the earn on energy consumption. The results of the measurement of this effects are related with economical costs and benefits, which may show a general view about economical, social and environmental scopes. As conclusions, interest results are show and this is proposed to incorporate them in the economical politics. [Spanish] En este articulo se tocan dos aspectos importantes del Diseno Bioclimatico (DB), el Impacto Social y el Impacto Ambiental. En la introduccion se justifica la importancia del tema, asociando el DB en el contexto de la sustentabilidad, con el modelo economico que se ha imperado en nuestro pais. El estudio se realiza bajo la perspectiva de los impactos que el DB tiene en el aspecto social y en el ambiental. En lo social, se recurre a la metodologia del Analisis Costo-Beneficio para evaluacion Social, en lo ambiental, aunque se tocan los puntos de impacto en aire, agua y uso de suelo, la medicion del impacto se realiza con base en la disminucion de emisiones de CO{sub 2} a la atmosfera por el ahorro en el consumo de energia electrica. Los resultados de la medicion de impactos se cruzan con los costos y beneficios economicos, para presentar un panorama completo en cuanto a aspectos economicos, sociales y ambientales. En las conclusiones se rescatan los resultados de interes y se proponen las inserciones de

  2. Design of very high speed electric generators;Diseno de generadores electricos de muy alta velocidad de giro

    Energy Technology Data Exchange (ETDEWEB)

    Labollita, Santiago [Universidad Nacional de Cuyo, Instituto Balseiro, Centro Atomico Bariloche (Argentina)

    2008-07-01

    This work approaches the design process of an electric generator suitable for running efficiently at high speed, driven by a turbo shaft.The axial flux concept was used.For the mechanical design of the prototype, cooling capacity and mounting method were considered, looking for simplicity of the parts evolved. Neodymium-iron-boron permanent magnets were used as magnetic source.For the electrical design, a calculation tool was developed in order to predict the prototype electrical parameters and optimize its geometry.The goal was to obtain 1 kW of electric power at a speed of 100,000 rpm.The efficiency and electrical behaviour of the prototype were characterized at speeds between 2,000 rpm and 30,000 rpm and then the behaviour at the design condition was predicted by obtaining an equivalent electric circuit.The estimated load voltage was 237 V as well as an electrical efficiency of 95%.Eddy current effects were not recognized. Increase of the internal resistance and decree of inductance were observed while raising the electric frequency.Finally, an electronic system was developed in order to use the prototype as a c.c. motor. Global performance was measured according to different supply characteristic. An optimum supply voltage was found.A maximum efficiency of 63% was reached.;El presente trabajo aborda el proceso de diseno de un generador electrico apto para funcionar eficientemente a alta velocidad, impulsado por un turboeje portatil. Se utilizo el concepto de flujo axial.En el diseno mecanico del prototipo se considero la capacidad de refrigeracion y la forma de montaje particular del conjunto, buscando la simplicidad de sus partes.Se utilizaron imanes permanentes de Neodimio-Hierro-Boro como fuente magnetica. Para el diseno electrico se genero una herramienta de calculo que permitio estimar los parametros electricos del prototipo y optimizar su geometria. Se busco obtener 1kW de potencia electrica a una velocidad de 100.000rpm.Se caracterizo el rendimiento y el

  3. Design and construction of a new furnace combustion pilot in IIE; Diseno y construccion de un nuevo horno experimental de combustion en el IIE

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Flores, Marco Antonio; Tamayo Flores, G. A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: mamf@iie.org.mx; gatamayo@iie.org.mx

    2010-11-15

    To expand the scope of studies and technological developments in the Laboratory of Combustion of the Thermal Process Management a new experimental furnace with a capacity of 1.5 MWt was designed and built. Spray design studies with real operational evaluation (comparison of emission of Combustion products and thermal behavior) as well as information on the behavior of the NO{sub x} emissions will be produced. An automatic control system using a water cooling jacket provides the cooling of the furnace. The furnace design is modular, consisting of six sections. Currently three trials to its maximum load of operation have been performed. The results show that the global energy balance of the furnace matches the design. The flue gas residence time and temperature also match those at the exit of steam generators of big capacity. [Spanish] Para ampliar las posibilidades de estudios y desarrollos tecnologicos del laboratorio de combustion de la Gerencia de Procesos Termicos, se diseno y construyo un nuevo horno experimental con capacidad maxima de 1.5 MegaWatts termicos (MWt). Este horno permitira realizar estudios de diseno de atomizadores con evaluacion de operacion real (comparacion de emision de productos de combustion y comportamiento termico), asi como ampliar la informacion que se tiene en el comportamiento de la emision de los oxidos de nitrogeno (NO{sub x}) que se producen en el horno. El diseno del horno es modular, compuesto por seis secciones, las cuales se enfrian de forma independiente a traves de un sistema de control automatico, empleando una chaqueta de enfriamiento por la cual circula agua. Actualmente se han realizado tres encendidos hasta alcanzar su carga maxima de operacion, los resultados obtenidos muestran que el balance de energia global del horno experimental es practicamente el de diseno y cumple con las caracteristicas de tiempo de residencia y temperatura de gases a la salida del horno de Generadores de Vapor de gran capacidad.

  4. Thermodynamic methodology for the design of solar dryers operated with flat solar collectors; Metodologia termodinamica para el diseno de secadores operados con calentadores solares planos

    Energy Technology Data Exchange (ETDEWEB)

    Torres Reyes, Ernestina; Navarrete Gonzalez, Jose L; Ibarra Salazar, Beatriz A; Picon Nunez, Martin [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanjuato, Guanajuato (Mexico)

    2000-07-01

    In this paper a thermal performance analysis of solar drying process at operating varying conditions is presented. It is described semi-empirical models to thermal characterization of an experimental device. A simulator of thermal performance for operating varying conditions was developed as a part of the procedure of thermal design of solar dryers. On the other hand, it is described a simplified method to design solar collectors based on the determination of minimum entropy generation during the thermal conversion of the solar device by using the thermal analysis procedure established and the method derived of the second law of the Thermodynamics are finally presented. [Spanish] En este trabajo se presenta el analisis termico del comportamiento del sistema -colector solar camara de secado-. Se describen los modelos semi-empiricos con los que se caracterizo termicamente un secador solar experimental del tipo indirecto. Se presenta tambien un procedimiento de diseno de equipo de secado que toma en cuenta las condiciones variables de operacion que presentan los dispositivos solares. Por otro lado se describe un procedimiento simplificado de diseno, basado en un analisis derivado de la segunda ley de la Termodinamica. Esta metodologia se fundamenta en la minima generacion de entropia durante la conversion termica de la energia solar, utilizando colectores solares planos. Finalmente se presentan los resultados del diseno preliminar de equipo de secado utilizando los dos procedimientos mencionados.

  5. Hybrid 95: Software for the design of hybrid systems, Potrerillo of Santa Teresa; Hybrid 95: Software de diseno de sistemas hibridos, Potrerillo de Santa Teresa

    Energy Technology Data Exchange (ETDEWEB)

    Casaravilla, G.; Chaer, R. [Instituto de Ingenieria Electrica, Facultad de Ingenieria, Universidad de la Republica, Montevideo (Uruguay)

    1997-12-31

    This paper describes the software Hybrid 95 and how it is used for the design of hybrid systems. As an application example some of the design stages are looked over (determination of the wind resource, simulations for sizing generation/storage and topology) of the Potrerillo installation. Taking into account the site clear ecological connotations, during the design consideration is made of the visual impact that represents the possible wind-generator, therefore several locations and wind-generator heights are studied, even arriving to the wind-generation elimination. [Espanol] Este trabajo describe el software Hybrid 95 y como se utiliza a los efectos del diseno de sistemas hibridos. Como ejemplo de aplicacion se recorren algunas de las etapas del diseno (determinacion del recurso eolico, simulaciones para el dimensionado de generacion/acumulacion y topologia) de la instalacion de Potrerillo. Teniendo en cuenta las claras connotaciones ecologistas del lugar, durante el diseno se tiene presente el impacto visual que representa el eventual aerogenerador por lo que se estudian diversas ubicaciones y alturas de aerogenerador, llegandose incluso a estudiar la eliminacion de la generacion eolica.

  6. The climatic change and the new demands in dwelling design; El cambio climatico y las nuevas exigencias en el diseno de la vivienda

    Energy Technology Data Exchange (ETDEWEB)

    Tardan Waltz, Jenny [Asociacion de Empresas para el Ahorro de la Energia en la Edificacion, A.C. (Mexico)

    2007-10-15

    In Mexico, the culture of energy saving began more than one decade ago, but the benefits are not yet concrete. The Mexican society, requires new designs of dwellings adapted to its needs and in addition modifies the present systems of construction that do not include criteria of design for the thermal comfort, the energy saving and the sustainability. It is urgent to reconsider the urbanism of the cities, as well as the promotion of the concept of sustainable development in all the branches of human activity. The design of dwellings must significantly integrate the energy and environmental components to reduce to the power consumption and the CO{sub 2} emissions. [Spanish] En Mexico, la cultura de ahorro de energia se inicio hace mas de una decada, pero los beneficios aun no son palpables. La sociedad mexicana, requiere de nuevos disenos de viviendas que se adapten a sus necesidades y que ademas modifiquen los sistemas de construccion actuales que no incluyen criterios de diseno para el confort termico, el ahorro de energia y la sustentabilidad. Es urgente reconsiderar el urbanismo de las ciudades, asi como la promocion del concepto de desarrollo sustentable en todas las ramas de la actividad humana. El diseno de la vivienda debe integrar los componentes energeticos y medioambientales, para reducir significativamente el consumo de energia y las emisiones de CO{sub 2}.

  7. Energy saving in office buildings through cheap bioclimatic design measures; Ahorro de energia en edificios de oficinas a partir de medidas de diseno bioclimatico de bajo costo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, Jose Roberto [Universidad Autonoma Metropolitana, Unidad Azcapotzalco (Mexico)

    2007-01-15

    This article shows the study performed in a building of Campus Uni dad Azcapotzalco in order to evaluate some bioclimatic design strategies. And to reach the higrothermic comfort and the appropriate lighting to favor employees to increase their performance in work activities. There are some strategies in order to solve this problem: the skylight area reduction, existing lights change, ventilation increase, fixed partition door implementation, etc. The obtained outcomes make possible the beginning of bioclimatic design use to save energy in other buildings, because sometimes edifications possess a design that cause the energy waste. [Spanish] En este articulo se muestra el estudio que se hizo en un edificio en el Campus Unidad Azcapotzalco, el fin de esta labor es evaluar ciertas estrategias de diseno bioclimatico para que las personas que operan en este edificio puedan tener confort higrotermico y una iluminacion pertinente, que den como resultado un mejor desempeno en las tareas que realizan. Algunas de las estrategias para darle solucion a esta problematica son: disminuir del area de lucernarios, cambiar las luminarias existentes, aumentar la ventilacion, implementar canceleria, etc. Con los resultados obtenidos nace la esperanza de que se utilicen estrategias de diseno bioclimatico para ahorrar energia en otros edificios, ya que muchas veces las edificaciones poseen un diseno que unicamente provoca el uso imprudente de la energia.

  8. Hybrid 95: Software for the design of hybrid systems, Potrerillo of Santa Teresa; Hybrid 95: Software de diseno de sistemas hibridos, Potrerillo de Santa Teresa

    Energy Technology Data Exchange (ETDEWEB)

    Casaravilla, G; Chaer, R [Instituto de Ingenieria Electrica, Facultad de Ingenieria, Universidad de la Republica, Montevideo (Uruguay)

    1998-12-31

    This paper describes the software Hybrid 95 and how it is used for the design of hybrid systems. As an application example some of the design stages are looked over (determination of the wind resource, simulations for sizing generation/storage and topology) of the Potrerillo installation. Taking into account the site clear ecological connotations, during the design consideration is made of the visual impact that represents the possible wind-generator, therefore several locations and wind-generator heights are studied, even arriving to the wind-generation elimination. [Espanol] Este trabajo describe el software Hybrid 95 y como se utiliza a los efectos del diseno de sistemas hibridos. Como ejemplo de aplicacion se recorren algunas de las etapas del diseno (determinacion del recurso eolico, simulaciones para el dimensionado de generacion/acumulacion y topologia) de la instalacion de Potrerillo. Teniendo en cuenta las claras connotaciones ecologistas del lugar, durante el diseno se tiene presente el impacto visual que representa el eventual aerogenerador por lo que se estudian diversas ubicaciones y alturas de aerogenerador, llegandose incluso a estudiar la eliminacion de la generacion eolica.

  9. Gasto público eficiente: Propuestas para un mejoramiento en los sistemas de compras y contrataciones gubernamentales

    Directory of Open Access Journals (Sweden)

    Marcelo Capello

    2015-04-01

    Full Text Available Los sistemas de compras públicas detentan una relevancia especial, tanto por la promoción de un gasto eficiente como por el interés de preservar valores institucionales como la transparencia, participación ciudadana y la prevención de actos de corrupción. El trabajo pretende ser una recopilación no exhaustiva de buenas prácticas de la evidencia internacional, de manera que sirvan para un análisis introspectivo entre organismos públicos avocados a la temática, acerca de su gestión de compras y contrataciones, con el afán de movilizar los incentivos adecuados para el logro de tan valiosos objetivos. En base a tales diagnósticos, se brindan algunas recomendaciones de política, sujetas a las oportunidades reales de adaptación en Argentina, tanto para un horizonte de planeamiento de corto, como de mediano y largo plazo. Así, se pretende contribuir a la formación de una estrategia integral para alcanzar estándares superiores de calidad y transparencia en la gestión de tan trascendental aspecto.Clasificación JEL: D02, H11, H41 , H57, O2

  10. ¿Existe un tamaño óptimo eficiente para los centros de investigación?

    Directory of Open Access Journals (Sweden)

    Guillermo Campos Ríos

    2013-01-01

    Full Text Available El presente documento sostiene que los actuales criterios de medición de productividad en la actividad de la ciencia y la tecnología no son los más adecuados. Sin embargo, es un hecho que estos mismos criterios, con todo lo criticable que puedan ser, se están aplicando para hacer estimaciones diversas sobre la calidad de la producción científica, tanto a nivel individual como a nivel colectivo, por ello no es adecuado abstraerse de tocar este tema. La evidencia obtenida permite sustentar la afirmación de que sí es posible encontrar tamaños óptimos eficientes de centros de investigación. Los resultados indican que no existe un único tamaño óptimo, sino varios tamaños óptimos en función del entorno en que se inscribe la actividad de ciencia y tecnología desarrollada en una institución. Esto permite concluir que el reto es encontrar -colectivamente- una manera de incidir, dentro del actual marco de estimación, para mejorar el aprecio por la actividad de los investigadores y promover mejores políticas y criterios de evaluación.

  11. Design of a hydraulic microturbine type Michell-Banki; Diseno de una microturbina hidraulica tipo Michell-Banki

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Luiz, Norberto; Rodriguez Bautista, Jose; Verduzco Figueroa, Hilario; Gudino Lau, Jorge; Galindo Granados, Miguel angel [Universidad de Colima, Facultad de Ingenieria Electromecanica, Manzanillo, Colima (Mexico)]. E-mail: norberto_lopez@ucol.mx

    2010-11-15

    The aim of this paper is to present the design of a hydraulic microturbine (MTH), which may be installed in areas where supplies are not available for electric power transmission lines, but possessing hydroelectric. MTH's role is to convert hydraulic energy into mechanical work, is coupled to an electric generator, whose function is to convert the mechanical energy into electrical energy. The turbine generator set will produce more electric power the greater the hydroelectric of the area. In southern Mexico, we have great hydroelectric potential, as the case of the states of Veracruz, Chiapas and Oaxaca, which have small causes of rivers where the MTH could be installed and put into operation. [Spanish] El objetivo de este articulo es presentar el diseno de una microturbina hidraulica (MTH), la cual podra ser instalada en zonas donde no se cuente con suministro de energia electrica por medio de lineas de transmision, pero que posean aprovechamientos hidroelectricos. La funcion de la MTH es convertir la energia hidraulica en trabajo mecanico, estara acoplada a un generador electrico, cuya funcion es convertir dicha energia mecanica en energia electrica. El conjunto turbina generador producira mas potencia electrica mientras mayor sea el aprovechamiento hidroelectrico de la zona. En el sur de Mexico contamos con un gran potencial hidroelectrico, como el caso de los estados de Veracruz, Chiapas y Oaxaca, que cuentan con pequenos causes de rios donde las MTH podrian ser instaladas y puestas en operacion.

  12. Design, construction and characterization of a rural solar furnace; Diseno, construccion y caracterizacion de un horno solar rural

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Luna, Gabriela

    2001-06-15

    centigrade, followed of the condition using 6 liters of oil, in which a maximum temperature of 115 centigrade was obtained and in the tests with 6 liters of water as load a maximum temperature of 95 centigrade was registered. In these tests the temperature of the oil surpasses 60 centigrade during an approximate period of 7 hours and is higher than 80 centigrade by a lapse of 5 hours. The water temperature is higher than 60 centigrade for a period of more than 5 hours and during 3 hours is higher than 80 centigrade. These results are satisfactory, because they assure the accomplishment of the process of baking inside the furnace. A calculation program was elaborated to implement the theoretical model of the concentration. This program reads the data of radiation intensity in the horizontal plane supplied by the weather station of the CIE and determines the incident radiation in the furnace collector. The theoretical model of the thermal behavior was implemented in another computer program; this program reads the data of the incident radiation in the collector of the furnace and the data of room temperature and calculates the temperature of the furnace as a time function. The model overestimates the temperature reached in the furnace, nevertheless reproduces qualitatively the thermal behavior of the same. In spite of the limitations of the theoretical model, this can be of utility in achieving the reproduction of the temperature of the load experimentally registered, through an effective coefficient of heat losses and an effective coefficient of heat capacity, characteristic of each one of the conditions of the test. [Spanish] Esta tesis presenta el diseno, construccion y caracterizacion de un horno solar tipo caja para su uso en comunidades rurales en la zona intertropical. El trabajo presentado en esta tesis parte del diseno opto-geometrico de un horno solar tipo caja propuesto por un entusiasta grupo de jovenes estudiantes (Acosta et al., 1996, Vazquez et al., 1998

  13. Design optimization of the Laguna Verde nuclear power station fuel recharge; Optimacion del diseno de recargas de combustible para la Central Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Campos, Carlos Cristobal [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico)

    1991-12-31

    It is described, in general terms, the procedure that is followed to accomplish the optimization of the recharge design, and an example is shown where this procedure was applied for the analysis of the type BWR reactor of Unit No. 1 of the Laguna Verde Nuclear Power Station. [Espanol] Se describe en terminos generales el procedimiento que se sigue para realizar la optimacion del diseno de recargas, y se muestra un ejemplo en el que se utilizo dicho procedimiento para el analisis del reactor tipo BWR de la unidad 1, de la Central Laguna Verde (CLV).

  14. Design optimization of the Laguna Verde nuclear power station fuel recharge; Optimacion del diseno de recargas de combustible para la Central Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Campos, Carlos Cristobal [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico)

    1992-12-31

    It is described, in general terms, the procedure that is followed to accomplish the optimization of the recharge design, and an example is shown where this procedure was applied for the analysis of the type BWR reactor of Unit No. 1 of the Laguna Verde Nuclear Power Station. [Espanol] Se describe en terminos generales el procedimiento que se sigue para realizar la optimacion del diseno de recargas, y se muestra un ejemplo en el que se utilizo dicho procedimiento para el analisis del reactor tipo BWR de la unidad 1, de la Central Laguna Verde (CLV).

  15. Miniestacas de yuca (Manihot esculenta Crantz: hacia un eficiente sistema de propagación en cultivo de tejidos

    Directory of Open Access Journals (Sweden)

    Miguel Macgayver Bonilla Morales

    2015-12-01

    Full Text Available Tradicionalmente, la yuca ha sido una fuente de carbohidratos para sectores de la población con bajos niveles de ingreso a nivel mundial, por lo que está implícita en la seguridad y soberanía alimentaria de la mayoría de los países denominados del tercer mundo. De esta manera, en sistemas de propagación para la regulación de problemas fitosanitarios y producción masiva, las técnicas de cultivo de tejidos, facilitan estos procesos en plantas con propagación vegetativa como la yuca. Sin embargo, el paso más costoso en el sistema, es la introducción y propagación a nivel in vitro, que luego serán endurecidas en la etapa ex vitro y llevadas a campo. Por su parte, la generación de miniestacas permite la obtención de semilla asexual o estacas de plantas endurecidas que están en proceso de finalización de la etapa ex vitro y que en vez de ir a campo se multiplican para que el sistema de producción de plantas sea más eficiente, pues de cada planta se pueden obtener de 4-6 miniestacas, que no tienen necesidad de aclimatación y, por ende, va a ser una producción segura de una nueva planta por miniestacas que se siembre. De esta manera, el sistema de propagación en cultivo de tejidos vegetales en yuca tiende a ser mejor aprovechado y rentable, pues el proceso será tanto a nivel in vitro como ex vitro.

  16. Uso de controlador PID como tecnologia eficiente em sistema de aquecimento de creche suína

    Directory of Open Access Journals (Sweden)

    Juliana de S. G. Barros

    2015-05-01

    Full Text Available O uso racional de energia elétrica em creches suínas pode ser viabilizado sem afetar o desempenho produtivo dos animais visando à sustentabilidade do setor razão por que o objetivo deste trabalho foi avaliar a eficiência de duas tecnologias de controle de temperatura em sistema de aquecimento resistivo em creche suína, no uso de energia elétrica e no ganho de peso dos leitões. Os sistemas avaliados foram: resistências elétricas suspensas com controle PID (proporcional, integral e derivativo e resistências elétricas suspensas com termostato. O experimento foi realizado durante o período de inverno, entre maio e setembro de 2013. Os critérios de comparação foram: consumo de energia elétrica (kWh, consumo específico (kWh kg-1, custo específico (R$ kg-1, indicador de eficiência elétrica no aquecimento, ganho de peso (kg e ganho de peso diário (kg d-1. O sistema de aquecimento com controlador PID, apesar de apresentar maior consumo médio, foi mais eficiente quanto ao uso de energia elétrica para produzir 1 kg de peso vivo (2,88 kWh kg-1, quanto ao custo específico (0,75 R$ kg-1 e quanto ao ganho de peso dos leitões (7,3 kg em comparação com o sistema com termostato (3,98 kWh kg-1, 1,03 R$ kg-1 e 5,2 kg, respectivamente.

  17. Implementation of the design attendent by computers (CAD) for the location of structures of power transmission lines; Implementacion del diseno asistido por computadora para la localizacion de estructuras de lineas de transmision

    Energy Technology Data Exchange (ETDEWEB)

    Vega Ortiz, Miguel; Gutierrez Arriola, Gustavo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    In order that the tools of CAD (Design Attended by Computer) that are offered in the market are really useful, they must combine the criteria and experiences of the expert designers with the specifications and practices established in the electrical company. This includes, from the introduction to the information system of the available input data and its design criteria, to obtaining the required output information. In the present work the methodology developed by the Instituto de Investigaciones Electricas (IIE) in the design of power transmission lines that integrates the Comision Federal de Electricidad (CFE) requirements in the design of its transmission power lines is an advanced computer tool that results in obtaining better designs. Some of the most important aspects are the reduction of the used working time, the cost of the designed line, its reliability, the flexibility in the information handling and the quality of presentation. [Spanish] Para que las herramientas de diseno asistido por computadora que se ofrecen en el mercado sean realmente utiles deben conjuntar los criterios y experiencias de los disenadores expertos con las especificaciones y practicas establecidas en la empresa electrica. Esto incluye desde la introduccion al sistema de la informacion de datos de entrada de la que se dispone y de sus criterios de diseno hasta la obtencion de la informacion de salida que se requiere. En el presente trabajo se resume la metodologia desarrollada por el Instituto de Investigaciones Electricas (IIE) en el diseno de lineas de transmision, que integra los requerimientos de la Comision Federal de Electricidad (CFE) en el diseno de sus lineas de transmision en una herramienta de computo avanzada y que redunda en la obtencion de mejores disenos. Algunos de los aspectos mas importantes son la reduccion del tiempo de trabajo empleado, el costo de la linea disenada, su confiabilidad, la flexibilidad en el manejo de informacion y la calidad de presentacion.

  18. Diseno de una Actividad de Aprendizaje Basada en la Argumentacion Dialogica en un curso Virtual de Biotecnologia y su Incidencia en el Desarrollo de Competencias Cientificas

    Science.gov (United States)

    Ortiz Benavides, Fedra Lorena

    El proposito de la investigacion fue evaluar la efectividad de una actividad de aprendizaje basado en la argumentacion dialogica en linea y su incidencia en el desarrollo de competencias cientificas. Se fundamenta en la teoria del aprendizaje socio cultural de Vigotsky (1984), los principios del diseno instruccional de la cognicion situada por Hung y Der-Thang (2001) y como estrategia se aplico la argumentacion dialogica utilizando el Modelo Argumentativo de Toulmin MAT (1984). El diseno experimental comparo dos grupos de estudiantes A y B en el curso virtual de Biotecnologia. El grupo A (experimental) desarrollo la discusion a partir de la estrategia disenada para este estudio y el grupo B (control) realizo la discusion desde las actividades tradicionales. El desarrollo de la competencia argumentativa se valoro con el instrumento de evaluacion para argumentacion dialogica en linea propuesta por Clark y Sampson (2008). La evaluacion de las competencias cientificas se realizo a partir de una postprueba. Los datos fueron analizados con pruebas estadisticas no parametricas. Los resultados de la investigacion, indicaron diferencias significativas en el nivel de la competencia argumental en el grupo experimental en comparacion al grupo control. Igualmente se demostro que existe una relacion positiva entre el nivel de desarrollo de la competencia argumentativa y el nivel de desarrollo de las competencias cientificas.

  19. Software for the design of acoustical steam silencers of the reaction-absorption type; Software para el diseno de silenciadores acusticos de vapor del tipo reaccion-absorcion

    Energy Technology Data Exchange (ETDEWEB)

    Buendia Dominguez, Eduardo H; Alvarez Chavez, Jose M [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    This paper describes the computer program named SILRA, that determines the outline dimensions of an acoustic steam silencer of the reaction-absorption type. These silencers are employed in the geothermoelectric power plants to lower the high levels of pressure and sound caused by the steam discharge to the surrounding atmosphere. The program has the capacity of predicting the noise level generated by the discharge without silencer depending on the emitting source. On SIRLA was successfully coupled the theory described in specialized literature with optimization techniques and experiences acquired in former designs. SIRLA is a powerful tool that allows the designer to optimize the equipment as well as the design time. [Espanol] En este trabajo se describe el programa de computo SILRA, que determina las dimensiones generales de un silenciador acustico de vapor tipo reaccion-absorcion, estos silenciadores se emplean en las centrales geotermoelectricas para abatir los altos niveles de presion de sonido provocados por la descarga del vapor a la atmosfera. El programa tiene la capacidad de predecir el nivel de ruido que genera la descarga sin silenciador, dependiendo de la fuente emisora. En SILRA se acoplaron con exito la teoria descrita en la literatura especializada con tecnicas de optimacion y experiencias adquiridas en disenos anteriores. SILRA es una poderosa herramienta que permite al disenador optimar tanto el equipo como el tiempo de diseno.

  20. Software for the design of acoustical steam silencers of the reaction-absorption type; Software para el diseno de silenciadores acusticos de vapor del tipo reaccion-absorcion

    Energy Technology Data Exchange (ETDEWEB)

    Buendia Dominguez, Eduardo H.; Alvarez Chavez, Jose M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    This paper describes the computer program named SILRA, that determines the outline dimensions of an acoustic steam silencer of the reaction-absorption type. These silencers are employed in the geothermoelectric power plants to lower the high levels of pressure and sound caused by the steam discharge to the surrounding atmosphere. The program has the capacity of predicting the noise level generated by the discharge without silencer depending on the emitting source. On SIRLA was successfully coupled the theory described in specialized literature with optimization techniques and experiences acquired in former designs. SIRLA is a powerful tool that allows the designer to optimize the equipment as well as the design time. [Espanol] En este trabajo se describe el programa de computo SILRA, que determina las dimensiones generales de un silenciador acustico de vapor tipo reaccion-absorcion, estos silenciadores se emplean en las centrales geotermoelectricas para abatir los altos niveles de presion de sonido provocados por la descarga del vapor a la atmosfera. El programa tiene la capacidad de predecir el nivel de ruido que genera la descarga sin silenciador, dependiendo de la fuente emisora. En SILRA se acoplaron con exito la teoria descrita en la literatura especializada con tecnicas de optimacion y experiencias adquiridas en disenos anteriores. SILRA es una poderosa herramienta que permite al disenador optimar tanto el equipo como el tiempo de diseno.

  1. Design and analysis of an intelligent public FV lighting system; Diseno y analisis de un alumbrado publico FV inteligente

    Energy Technology Data Exchange (ETDEWEB)

    Hanessian D, Ana V.; Gordon, Manuel [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)

    2009-07-01

    In the Mexico's National Energy Balance of 2008, it is considered that of the total of the electrical power consumption in our country, 18% is dedicated to lighting. Conscious of the necessity of saving energy in public lighting in this article is presented the design, construction and analysis of the power consumption of a public light fed with electricity of photovoltaic cells and the control of intensity on the light in inverse way of the natural light. A lamp constructed based in light emitting diodes (LEDs) is used. This has the quality of consuming very little energy that could be provided by the sun and be stored to use it at night. With this system, proven at scale, energy savings are obtained superior to 50% of the conventional one and, in relation to the commercial photovoltaic (FV) luminaries up to 30%. [Spanish] Del Balance Nacional de Energia, de Mexico, de 2008, se considera que del total del consumo de energia electrica en nuestro pais, el 18% esta dedicado a la iluminacion. Conscientes de la necesidad de ahorrar energia en alumbrado publico, en este articulo se presenta el diseno de construccion y analisis del consumo energetico de una luminaria publica alimentada con electricidad de celdas fotovoltaicas y el control de intensidad de la luz de manera inversa a la luz natural. Se utiliza un foco construido a base a los diodos emisores de luz (LEDs, por sus siglas en ingles). Estos tienen la cualidad de consumir muy poca energia que podra ser suministrada por el sol y almacenada para utilizarla en la noche. Con este sistema, probado a escala, se logran ahorros de energia superiores al 50% del convencional y, en relacion a las luminarias fotovoltaicas (FV) comerciales, hasa el 30%.

  2. Energy conservation and contribution to the sustained development through action in the bioclimate design; Ahorro de energia y contribucion al desarrollo sustentable a partir de acciones de diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J. R.; Dorantes Rodriguez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1995-12-31

    , construction and monitoring of the functioning of cooling passive systems. The results obtained to date point out that the energy consumption has diminished and improved the environmental comfort conditions for the library building users. [Espanol] La crisis mundial de energia de 1973, ademas de los problemas de abastecimiento y elevacion de precios, propicio tambien diversos paises, una reaccion orientada al uso eficiente y conservacion de la energia, y a la aplicacion de una arquitectura con sentido comun: la ARQUITECTURA BIOCLIMATICA, misma que se basa en la utilizacion en las edificaciones de las energias alternativas, tales como la solar eolica, etc. Obtencion de condiciones de confort natural ambiental y ahorro y uso eficiente de la energia en los edificios, son los objetivos fundamentales de la ARQUITECTURA BIOCLIMATICA. Bajo estas consideraciones, se han planteado diversos sistemas pasivos para control termico de edificios, los cuales se han aplicado en diferentes regiones climaticas del planeta. En el presente trabajo, se presenta y analiza el potencial de medidas para ahorro de energia, tales como sistemas de iluminacion artificial de alta eficiencia y sistemas pasivos de enfriamiento para el control termico de un edificio educativo, la biblioteca central de la Universidad Autonoma Metropolitana, Unidad Azcapotzalco, ubicada en la ciudad de Mexico. El objetivo de este estudio se orienta a la reduccion del consumo de energia en la biblioteca, y a la obtencion de condiciones de confort ambiental higrotermico para sus ocupantes. Estudios realizados durante la primera etapa de investigacion, han permitido identificar un excesivo consumo de energia y condiciones de falta de confort higrotermico y de la necesaria calidad del aire interior en la biblioteca. Estas acciones se han enfocado en dos aspectos. El primero se refiere al mejoramiento de la operacion de la instalacion electrica y el alumbrado de la biblioteca. Estas acciones se basaron en la sustitucion de lamparas

  3. Energy conservation and contribution to the sustained development through action in the bioclimate design; Ahorro de energia y contribucion al desarrollo sustentable a partir de acciones de diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J R; Dorantes Rodriguez, R [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1996-12-31

    , construction and monitoring of the functioning of cooling passive systems. The results obtained to date point out that the energy consumption has diminished and improved the environmental comfort conditions for the library building users. [Espanol] La crisis mundial de energia de 1973, ademas de los problemas de abastecimiento y elevacion de precios, propicio tambien diversos paises, una reaccion orientada al uso eficiente y conservacion de la energia, y a la aplicacion de una arquitectura con sentido comun: la ARQUITECTURA BIOCLIMATICA, misma que se basa en la utilizacion en las edificaciones de las energias alternativas, tales como la solar eolica, etc. Obtencion de condiciones de confort natural ambiental y ahorro y uso eficiente de la energia en los edificios, son los objetivos fundamentales de la ARQUITECTURA BIOCLIMATICA. Bajo estas consideraciones, se han planteado diversos sistemas pasivos para control termico de edificios, los cuales se han aplicado en diferentes regiones climaticas del planeta. En el presente trabajo, se presenta y analiza el potencial de medidas para ahorro de energia, tales como sistemas de iluminacion artificial de alta eficiencia y sistemas pasivos de enfriamiento para el control termico de un edificio educativo, la biblioteca central de la Universidad Autonoma Metropolitana, Unidad Azcapotzalco, ubicada en la ciudad de Mexico. El objetivo de este estudio se orienta a la reduccion del consumo de energia en la biblioteca, y a la obtencion de condiciones de confort ambiental higrotermico para sus ocupantes. Estudios realizados durante la primera etapa de investigacion, han permitido identificar un excesivo consumo de energia y condiciones de falta de confort higrotermico y de la necesaria calidad del aire interior en la biblioteca. Estas acciones se han enfocado en dos aspectos. El primero se refiere al mejoramiento de la operacion de la instalacion electrica y el alumbrado de la biblioteca. Estas acciones se basaron en la sustitucion de lamparas

  4. Cost-Benefit of the energy saving in the bioclimatic designs; Costo-Beneficio del ahorro de energia en los disenos bioclimaticos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez P, J. Manuel A. [Doble Dos Soluciones de Negocios, S.A. de C.V., Mexico, D.F. (Mexico); Morillon G, David; Rodriguez V, Luis [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    1999-07-01

    Tools and criteria for the Cost-Benefit analysis from the energy saving in bioclimatic designs (BD) are presented, for which, a reference project is established and the costs and benefits of energy saving in BD with base in that project are evaluated. A case study is presented taking as reference the traditional design of the air conditioning of a building and with this base the estimation of cost-benefit of the same building is made, but with passive systems. The tools used are those that allow to consider related resources such as time and money; in that sense, are used criteria such as: Present value (PV), Equivalent Annual Cost (EAC) and the Cost of the Conserved Energy (CCE). The costs related to the construction, maintenance and operation of the design are taken into account. The differences between the reference design and the BD, established from the application of these criteria, allow to evaluate the economic margin of the BD as far as operation and maintenance is concerned. Finally the CCE of the bioclimatic measures is evaluated as an initiative of energy saving and the present value is calculated of the energy saving in the entire useful life of a bioclimatic design. [Spanish] Se presentan herramientas y criterios para el analisis Costo-Beneficio del ahorro de energia en disenos bioclimaticos (DB), para lo cual, se establece un proyecto de referencia y se evaluan los costos y beneficios del ahorro de energia en DB con base en ese proyecto. Se presenta el estudio de un caso tomando como referencia el dise tradicional de la climatizacion de un edificio y con base en este, se realiza la estimacion de costos y beneficios del mismo edificio, pero con sistemas pasivos. Las herramientas usadas, son aquellas que permiten considerar recursos relacionados como son tiempo y dinero; en ese sentido, se usan criterios como: Valor Presente (VP), Costo Anual Equivalente (CAE) y el Costo de la Energia Conservada (CEC). Se toman en consideracion los costos relacionados

  5. Proyecto Arquitectónico Energéticamente Eficiente Mediante Gramáticas de Formas y Aprendizaje por Refuerzo

    OpenAIRE

    Gavilanes-Velaz-de-Medrano, Juan; Hidalgo, Pablo; Belmonte, David; Mandow-Andaluz, Lorenzo; Ruiz-Montiel, Manuela

    2015-01-01

    En este trabajo presentamos un sistema para la generación de esquemas de viviendas unifamiliares energéticamente eficientes. Los esquemas se sintetizan mediante la ejecución de gramáticas de formas simples, entrenadas por medio de técnicas de aprendizaje por refuerzo, teniendo en cuenta criterios tanto de habitabilidad como de eficiencia energética. Los resultados obtenidos son analizados y validados Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.

  6. Design of a grounding network in electrical substations. Materials and formulas the most used; Diseno de redes de tierra en subestaciones electricas. Materiales y formulas mas utilizadas

    Energy Technology Data Exchange (ETDEWEB)

    Raull Martin, J. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)

    2000-09-01

    The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as well as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presenta los terrenos con diversas caracteristicas fisicas. Asimismo, se solucionan ejercicios ilustrativos a lo largo del articulo.

  7. Application of the Pinch analysis for the design of a cogeneration system in a paper mill; Aplicacion del analisis Pinch para el diseno de un sistema de cogeneracion en una industria papelera

    Energy Technology Data Exchange (ETDEWEB)

    Mani Gonzalez, A. G.; Arriola Medellin, A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.

  8. Application of the Pinch analysis for the design of a cogeneration system in a paper mill; Aplicacion del analisis Pinch para el diseno de un sistema de cogeneracion en una industria papelera

    Energy Technology Data Exchange (ETDEWEB)

    Mani Gonzalez, A G; Arriola Medellin, A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.

  9. Tendencias y cambio del clima del valle del Mantaro mediante los análisis de índices de Precipitación Efectiva y Temperatura Eficiente

    Directory of Open Access Journals (Sweden)

    Jacinto Arroyo Aliaga

    2011-06-01

    Full Text Available Objetivos: La investigación fue para evaluar los cambios y tendencias del clima del valle del Mantaro en función del análisis de sus índices de temperatura eficiente y precipitación efectiva a partir de los valores totales mensuales de precipitación y valores medios mensuales de temperatura, medidos desde el año 1921 hasta el año 2010, para comparar la tendencia de los movimientos seculares con la teoría del calentamiento climático global. Métodos: Para encontrar las tendencias de las precipitaciones y temperatura, se analizaron los índices de precipitación efectiva y temperatura eficiente; luego se determinó el comportamiento interanual de la precipitación y temperatura con sus rangos de variabilidad máximo y mínimo para determinar el tipo de clima en función del coeficiente de variación; las series permitió encontrar las tendencias cíclicas de corta y larga duración mediante el análisis de índices para evaluar la tendencia general. Resultados: Las tendencias observadas en las series cíclicas de larga duración de los índices de temperatura eficiente y precipitación efectiva muestran un comportamiento inversamente proporcional a su movimiento secular, el aumento de la temperatura genera disminución en las precipitaciones y los movimientos seculares muestran estos cambios para la temperatura en cuarenta años y de ochenta años para la precipitación. Conclusiones: Los cambios y tendencias encontradas para el clima del valle del Mantaro muestran un mayor calentamiento y una disminución de la precipitación en las décadas analizadas, siendo los últimos años de la década del 2000 la fase de inversión; por lo tanto se afianza la teoría del calentamiento climático global.

  10. Uso eficiente da água : uma contribuição para o desenvolvimento sustentável da agropecuária

    OpenAIRE

    Faggion, Francisco; Oliveira, Carlos Alberto da Silva; Christofidis, Demétrios

    2009-01-01

    Na maioria das áreas agrícolas irrigadas o volume de água utilizado é superior ao realmente necessário para a produção satisfatória de alimentos. A eficiência no uso da água pode auxiliar na resolução dos problemas de escassez, diminuir conflitos entre usuários e aumentar, estabilizar e garantir a produção. Este trabalho mostra possíveis alternativas para o uso eficiente da água na agropecuária baseado em diretrizes desenvolvidas na Europa e Estados Unidos, procurando estabelecer critérios de...

  11. Concentração eficiente e econômica de caulim para a proteção de algodoeiro contra o bicudo

    Directory of Open Access Journals (Sweden)

    Ana Lígia Aureliano de Lima e Silva

    2015-09-01

    Full Text Available Resumo:O objetivo deste trabalho foi determinar a concentração de caulim mais eficiente e econômica para a proteção de algodoeiro contra os danos causados pelo bicudo-do-algodoeiro (Anthonomus grandis. Utilizou-se o delineamento experimental de blocos ao acaso, com cinco tratamentos de pulverizações com caulim nas concentrações: 20, 40, 60, 80 e 100 g L-1. Determinaram-se os seguintes parâmetros: percentagem de botões florais com orifícios de oviposição por fêmeas do bicudo; resíduos de caulim depositados sobre as folhas e as brácteas do algodoeiro; média da produção; e receita líquida do algodão, por hectare, a partir da pesagem da pluma de algodão com caroço. As percentagens de botões florais com orifício de oviposição variaram de 13,6 a 30,8%; o resíduo médio de caulim depositado nas folhas, de 0,0010 a 0,0034 mg mm-2, e nas brácteas, de 0,0010 a 0,0034 mg mm-2; a produção variou de 348,1 a 717,8 kg ha-1; e a receita líquida de algodão de R$ 1.033,88 a R$ 2.098,86 por hectare. As concentrações de caulim mais eficientes para a proteção de algodoeiro contra o bicudo são as de 60, 80 e 100 g L-1; no entanto, a de 60 g L-1foi a mais econômica.

  12. Graphs for the best hydraulic design of dropping irrigation systems of low load; Graficas para el diseno hidraulico optimo de sistemas de riego por goteo de baja carga

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Fernandez, E; Lopez Telles, P [Instituto de ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2003-04-15

    In this article are shown the graphics for the best design of dropping irrigation systems of low head with 17 mm of external diameter hose and O-Tiff type insertion dropper of low outlay. The design consists in getting the minimum number of laterals once the space between these and the droppers is established. The graphics were obtained by using a model for open networks of pipes adjusted with the information for top lengths of the dropping lateral included on the manufacture's technical sheet with an 0.90 emission uniformity for flat ground conditions. The systems can be fixed or mobile (from 0.5 to 3.2 m between laterals) to irrigate orchards or farmings with its plants separated from 0.3 to 0.8 m with an average expenditure of 1.39 L/hr for black droppers. The load on the feed-tank (or bolster) is of 1.5 m. The irrigation areas may fluctuate between 750 up to 6 780 m{sup 2} and the costs from 1.1 to 13 pesos per m{sup 2}. [Spanish] Se presentan graficas para el diseno optimo de sistemas de riego por goteo de baja carga con mangueras de 17 mm de diametro externo y goteros de insercion tipo laberinto O-Tif de goteo pequeno. El diseno consiste en obtener el numero optimo de laterales una vez establecidas las separaciones entre estos y los emisores. Las graficas se obtuvieron con ayuda de un modelo matematico para redes abiertas de tuberias que fue calibrado a partir de la informacion de longitudes maximas del lateral de goteo incluida en la hoja tecnica del fabricante, con uniformidad de emision de 0.90 en terreno plano. Los sistemas pueden ser fijos o moviles para el riego de hortalizas o cultivos con separaciones entre plantas de 0.3 a 0.8 m y de 0.5 a 3.2 m entre laterales, con gastos promedio de 1.391/h para goteros de color negro. La carga en el tanque de alimentacion o cabezales de 1.5 m. Las areas de riego van desde 750 hasta 6780 m{sup 2} y los costos unitarios de 1.1 a 1.3 pesos por m{sup 2}.

  13. Research reactor fuel bundle design review by means of hydrodynamic testing; Ensayos hidrodinamicos para verificacion de diseno de un elemento combustible para reactores de investigacion

    Energy Technology Data Exchange (ETDEWEB)

    Pastorini, A; Belinco, C [Comision Nacional de Energia Atomica, San Martin (Argentina). Centro Atomico Constituyentes

    1998-12-31

    During the design steps of a fuel bundle for a nuclear reactor, some vibration tests are usually necessary to verify the prototype dynamical response characteristics and the structural integrity. To perform these tests, the known hydrodynamic loop facilities are used to evaluate the vibrational response of the bundle under the different flow conditions that may appear in the reactor. This paper describes the tests performed on a 19 plate fuel bundle prototype designed for a low power research reactor. The tests were done in order to know the dynamical characteristics of the plates and also of the whole bundle under different flow rate conditions. The paper includes a description of the test facilities and the results obtained during the dynamical characterization tests and some preliminary comments about the tests under flowing water are also presented. (author) 4 refs., 12 figs., 4 tabs. [Espanol] Durante el diseno de un elemento combustible para un reactor nuclear se requiere de la realizacion de ensayos con el objeto de verificar el comportamiento de ese diseno y permitir, de ser necesario, la introduccion de modificaciones al mismo. Para verificar las caracteristicas de respuesta dinamica e integridad estructural, se realizan ensayos de vibraciones que incluyen someter al prototipo a condiciones de circulacion del fluido similares a las que soportara durante la operacion del reactor. Estos ensayos se realizan en facilidades de ensayos conocidas como circuitos hidrodinamicos, que permiten no solo someter el prototipo al flujo de fluido, sino tambien obtener una adecuada caracterizacion de la respuesta del mismo a traves del luso de sensores de distinto tipo. En este trabajo se describen los ensayos realizados sobre un prototipo de elemento combustible de 19 placas destinado a un reactor de investigacion multiproposito de baja potencia. Los ensayos tuvieron como objetivo conocer la respuesta dinamica de las placas individuales y del elemento combustible en su

  14. Optimization in the design and efficiency of retractable soot blowers; Optimacion del diseno y la eficiencia de sopladores de hollin retractiles

    Energy Technology Data Exchange (ETDEWEB)

    Diego Marin, Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    In this article the importance of soot blowers in the subject of design, operation and maintenance are described and the effects that its inefficient functioning causes in the steam generators. The activities and the results of a project for the evaluation of the functioning of the soot blowers in the Comision Federal de Electricidad (CFE) boilers. Finally, the scope of a new project oriented towards the retractable soot blowers efficiency optimization, and to the creation of the infra-structure to substitute the import of its components. [Espanol] En este articulo se describe la importancia de los sopladores de hollin en los aspectos de diseno, operacion y mantenimiento, y los efectos que su funcionamiento deficiente produce en los generadores de vapor. Se presentan tambien las actividades y los resultados de un proyecto para evaluar el funcionamiento de los deshollinadores de las calderas de la Comision Federal de Electricidad (CFE). Finalmente, se presenta el alcance de un nuevo proyecto que se orienta a optimar la eficiencia de los sopladores de hollin retractiles y a crear la infraestructura para sustituir las importaciones de sus componentes.

  15. Design and manufacture of an atmospheric burner of biogas with rural application; Diseno y construccion de un quemador atmosferico de biogas con aplicaciones rurales

    Energy Technology Data Exchange (ETDEWEB)

    Nunez Nunez, Jorge; Suarez Pacheco, Jose; Novelo Navarrete, Jose H; Soto Apolinar, Efrain [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico)

    2000-07-01

    In this text it's resumed the methodology that was carried out to make an atmospheric burner of biogas, as the criteria that were taken in account in order to determine the main parameters of it. It introduces a synthesis of the stages of design and manufacture of the device. The utility of this type of burner increase the efficiency of the oxidation of the biogas compared with the use of conventional burners that aren't designed for this purpose. [Spanish] En este trabajo se resume la metodologia que se llevo a cabo para la construccion de un quemador de biogas tipo atmosferico, asi como los criterios que se tomaron para la determinacion de los parametros principales del mismo. Se presenta una sintesis de las etapas de diseno y manufactura del dispositivo. El uso de este tipo de quemadores aumenta la eficiencia de la oxidacion del biogas en comparacion con el uso de quemadores convencionales que no estan disenados para quemar biogas.

  16. Optimization in the design and efficiency of retractable soot blowers; Optimacion del diseno y la eficiencia de sopladores de hollin retractiles

    Energy Technology Data Exchange (ETDEWEB)

    Diego Marin, Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In this article the importance of soot blowers in the subject of design, operation and maintenance are described and the effects that its inefficient functioning causes in the steam generators. The activities and the results of a project for the evaluation of the functioning of the soot blowers in the Comision Federal de Electricidad (CFE) boilers. Finally, the scope of a new project oriented towards the retractable soot blowers efficiency optimization, and to the creation of the infra-structure to substitute the import of its components. [Espanol] En este articulo se describe la importancia de los sopladores de hollin en los aspectos de diseno, operacion y mantenimiento, y los efectos que su funcionamiento deficiente produce en los generadores de vapor. Se presentan tambien las actividades y los resultados de un proyecto para evaluar el funcionamiento de los deshollinadores de las calderas de la Comision Federal de Electricidad (CFE). Finalmente, se presenta el alcance de un nuevo proyecto que se orienta a optimar la eficiencia de los sopladores de hollin retractiles y a crear la infraestructura para sustituir las importaciones de sus componentes.

  17. MECANISMOS EFICIENTES NA PRODUÇÃO DO FRACASSO ESCOLAR DE JOVENS NEGROS: ESTEREÓTIPOS, SILENCIAMENTO E INVISIBILIZAÇÃO

    Directory of Open Access Journals (Sweden)

    Rodrigo Ednilson de Jesus

    2018-01-01

    Full Text Available Resumo: O artigo tem como objetivo refletir sobre alguns dos eficientes mecanismos de produção do fracasso escolar de jovens negros e negras, a partir dos resultados da pesquisa “A exclusão de jovens adolescentes de 15 a 17 anos cursando ensino médio no Brasil: desafios e perspectivas”. A pesquisa foi realizada nos anos de 2012 e 2013 nas cidades de Belo Horizonte, Brasília, São Paulo, Fortaleza e Belém. A partir das experiências narradas pelos jovens adolescentes, ao longo das entrevistas em profundidade realizadas na cidade de São Paulo, foi possível observar como os processos de estereotipização de corpos vistos como anormais, aliados ao silenciamento acerca do racismo, interferem na autoimagem e na autoestima dos jovens, contribuindo, direta e indiretamente, para os elevados índices de reprovação e evasão observados neste grupo étnico-racial.

  18. Diseño de un modelo de scoring para la gestión eficiente de la cartera en una agencia de cobranzas

    Directory of Open Access Journals (Sweden)

    Luis David Delgado Vélez

    2017-06-01

    Full Text Available El objetivo de esta investigación es diseñar un modelo de scoring para el manejo eficiente de la cartera en una agencia de cobranzas en Colombia. Para ello, se utilizó un modelo de regresión logística con una base de datos de 16.000 clientes morosos de bancos, cooperativas y empresas de servicios públicos. Los resultados indican que, según las características socioeconómicas, la morosidad, los ingresos y el endeudamiento, el 50% de las carteras comercial, de consumo y microcrédito son recuperables. En conclusión, los modelos de scoring son de gran utilidad para la gestión financiera, dado que facilita la implementación de políticas de ventas en términos de plazos y cupos, además de realizar seguimientos más individualizados a sus clientes.

  19. DISEÑO DE UNA HERRAMIENTA EFICIENTE DE SIMULACIÓN AUTOMÁTICA DE FALLAS EN SISTEMAS ELÉCTRICOS DE POTENCIA

    Directory of Open Access Journals (Sweden)

    LUCAS PÉREZ-HERNÁNDEZ

    2010-01-01

    Full Text Available En este artículo se propone una alternativa eficiente para la simulación automática de fallas en sistemas de potencia a partir de una estrategia cooperativa entre Matlab â y el ATP. Esta estrategia de simulación permite reducir el tiempo para la obtención de una base de datos de fallas, tal como lo demuestran los resultados comparativos obtenidos en el caso de cuatro sistemas diferentes, donde se obtuvieron reducciones promedio del 96% en el tiempo de simulación, con respecto al tiempo de simulación obtenido con las metodologías clásicas. Las bases de datos obtenidas a partir de las simulaciones son normalmente utilizadas para ajustar herramientas de computación suave aplicadas a la resolución de problemas, tal como el aquí referenciado y asociado a la localización de fallas en sistemas de distribución de energía eléctrica.

  20. Efficient use of electric power in corporative 3M Mexico; Uso eficiente de la energia electrica en el corporativo 3M Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Perez, Alfredo; Quinones Bonilla, Antonio S. [3M Mexico, S.A. de C.V. (Mexico); Bustos Antunez, Jorge I; Reyes Arce, Manuel [Hines Interests, S.A. de C.V. (Mexico)

    2003-07-01

    It is not enough to count on with the state of the art technology for the daily operation of a building, the challenge is to be able to make a clear analysis and with attainable goals for the optimization of rational use of the electrical energy in the operation of intelligent buildings without affecting the comfort and productivity for users as well as the functionality and profitability for the owner. This went our base to carry out control strategies that helped the efficient use of the electrical energy, obtaining important savings without neglecting the operative part, of services and human within the property. It is thus, that 3M Mexico wanting to reach these purposes, conducted actions to improve the efficiency of the equipment in the following items: electric network, general lighting, air conditioning system, ventilation and extraction, hydropneumatic system, and sumps operation. [Spanish] No basta contar con la tecnologia de punta para la operacion diaria de un edificio, el reto es ser capaces de realizar un analisis claro y con metas alcanzables para la optimizacion de uso racional de la energia electrica en las operaciones de edificios inteligentes sin afectar el confort y productividad para usuarios asi como la funcionalidad y rentabilidad para el propietario. Esta fue nuestra base para llevar a cabo estrategias de control que ayudaron al uso eficiente de la energia electrica, obteniendo ahorros importantes sin descuidar la parte operativa, de servicios y humana dentro de la propiedad. Es asi, que 3M Mexico queriendo alcanzar dichos propositos, realizo acciones para mejorar la eficiencia de los equipos en los siguientes rubros: red electrica, iluminacion general, sistema de aire acondicionado, ventilacion y extraccion, sistema hidroneumatico, y operacion de carcamos.

  1. Computational program to design heat pumps by compression (ciclo 1.0); Programa computacional para diseno de bombas de calor por compresion (ciclo 1.0)

    Energy Technology Data Exchange (ETDEWEB)

    De Alba Rosano, Mauricio [CIE, UNAM, Temixco, Morelos (Mexico)

    2000-07-01

    A new computational program has been developed in order to design single stage compression heat pumps. This software, named CICLO 1.0 allows the design of water-water, water-air, air-water and air-air heat pumps, for industrial and residential applications. CICLO 1.0 simulates three types of compressors: reciprocating, screw and scroll. Also has a data base created with REFPROP software which includes eleven refrigerants. The condenser and evaporator simulation includes global conductance (UA) determination, and when one or both are shell and tube's type, this software shows the even number of tube passes by shell. The software determines the best compressor and refrigerant setup taking the COP as a parameter; in order to obtain this, is necessary to know the inlet/outlet conditions of the fluid to be heated, the inlet conditions of the fluid that gives heat, and the electric motor efficiency that drives the compressor. The afforded results by CICLO 1.0 are: operation conditions from compression cycle, that means, pressures and temperatures at the inlet/outlet from every heat pump component are determined: as well as refrigerant mass flux, COP, power required by compressor, volumetric and isentropic efficiencies, heat exchangers global conductance and more data. CICLO 1.0 has been executed with heat pump data that nowadays are operating, and the results from the simulation have been very similar each other with data reported from operational facilities. [Spanish] Se ha desarrollado un nuevo programa computacional para el diseno de bombas de calor por compresion de vapor de una sola etapa. Este programa, CICLO 1.0, permite el diseno de bombas de calor de tipo: agua-agua, agua-aire, aire-agua y aire-aire, que se utilicen para aplicaciones industriales, de servicios y residenciales. CICLO 1.0 simula tres tipos de compresores: reciprocante, de tornillo y scroll: cuenta con una base de datos de refrigerantes creada con el programa REFPROP la cual incluye once

  2. Solar system design to heating water for a biodigester; Diseno de un sistema solar de calentamiento de agua para un biodigestor

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Castro, Lucia Monica; Quinto Diez, Pedro [Escuela Superior de Ingenieria Mecanica y Electrica, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: moni-80-lgc@hotmail.com; pqd510@hotmail.com; Tovar Galvez, Luis Raul [Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: ltovarg@ipn.mx

    2010-11-15

    In this paper a Solar System of Heating Water (SSHW) to provide energy to a biodigester which produces biogas located in the Interdisciplinary Center of Investigation of Studies About Environment and Development (CIIEMAD) is assessed. This evaluation is made by means of the f Method considerating the extraterrestrial radiation, the earth radiation in the zone and the necessary energy to maintain at 55 degrees Celsius the mixture inside the biodigester. The data were introduced in the SOLAR program to calculate both the harnessing area m{sup 2} and the storage capacity in L/m{sup 2}. To guarantee the good performance of the SSHW, a control and monitoring system for the temperature of the mix inside the biodigester is proposed. It also controls the input and output temperature to the solar collectors, as well as the cost analysis which shows the savings of fuel of the SSHW with a conventional system to heating water. [Spanish] En este articulo se evalua un sistema solar de calentamiento de agua (SSCA) para proveer energia a un biodigestor que forma parte del sistema de generacion de biogas (SGB) ubicado en el Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo (CIIEMAD). Dicha evaluacion se realiza por medio del Metodo f de diseno que considera datos de radiacion terrestre, radiacion extraterrestre sobre la zona y la energia necesaria para mantener la temperatura de la mezcla dentro del biodigestor a 55 grados centigrados. Los datos fueron introducidos en el programa SOLAR para el calculo del area de captacion en m{sup 2} y la capacidad de almacenamiento en L/m{sup 2}. Para garantizar el buen funcionamiento del SSCA se propone un sistema de control y monitoreo de la temperatura de la mezcla dentro del biodigestor. Tambien se controla la temperatura de entrada y salida a los colectores solares, asi como el analisis de costos que muestra el ahorro de combustible del SSCA con un sistema convencional de calentamiento de agua.

  3. Caracterização genética de rizóbios nativos dos tabuleiros costeiros eficientes em culturas do guandu e caupi

    Directory of Open Access Journals (Sweden)

    Fernandes Marcelo Ferreira

    2003-01-01

    Full Text Available O objetivo deste trabalho foi caracterizar geneticamente sete estirpes de rizóbios nativos dos tabuleiros costeiros de Sergipe com alta eficiência de fixação biológica do N2 em associação com guandu (Cajanus cajan e caupi (Vigna unguiculata. A amplificação do DNA pela técnica de PCR (polymerase chain reaction com o oligonucleotídeo específico BOX indicou um grau elevado de diversidade genética, uma vez que todas as estirpes apresentaram perfis únicos de DNA. A análise por BOX-PCR revelou, ainda, que essa metodologia é eficiente para diferenciar estirpes, mas não para a diferenciação de espécies de rizóbio. Pela técnica do RFLP (restriction fragment length polymorphism da região do DNA que codifica o gene 16S rRNA e da região intergênica entre os genes 16S e 23S rRNA, com cinco enzimas de restrição, bem como pelo seqüenciamento parcial da região do 16S rRNA, foi possível classificar as estirpes nos gêneros Bradyrhizobium e Rhizobium. Houve coerência entre as análises envolvendo a região do 16S rRNA, mas o agrupamento com uma das estirpes diferiu pela análise do espaço intergênico. Os resultados obtidos com a estirpe R11 indicam variabilidade genética elevada em relação às espécies de rizóbios descritas, inclusive diferindo em diversas bases da região do 16S rRNA, e podem indicar uma nova espécie.

  4. The efficient use of the electric energy in underground water pumping systems in the Bajio (lowlands); El uso eficiente de la energia electrica en los sistemas de bombeo de agua subterranea en el Bajio

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, E. [Irapuato (Mexico)

    1997-12-31

    In the Bajio region the underground water is the main source of drinking water and approximately constitutes 50% of the water used for agricultural purposes. From the energy standpoint pumping represents 33% of the electricity consumption and a wastage of 35% is estimated. In order to take care of this problem a methodology was designed for an energetic appraisal of the well pumping systems, with the basic objective of knowing the electro-mechanical efficiency of the equipment and the efficiency of the auxiliary equipment and the well hydraulic response. The analysis of the results of 221 diagnoses performed demonstrates the profitability of the equipment rehabilitation, plus other advantages of collective character . [Espanol] En la region del Bajio, el agua subterranea constituye la principal fuente de agua potable y aproximadamente, el 50% del agua para riego agricola; desde el punto de vista energetico, el bombeo de ella representa el 33% de la electricidad que se consume y se estima un desperdicio del 35%. Para atender la problematica, se diseno una metodologia para un diagnostico energetico de los sistemas de bombeo de los pozos, con el objetivo basico de conocer la eficiencia electro-mecanica de los equipos, el comportamiento de los equipos auxiliares y la capacidad de respuesta hidraulica del pozo. El analisis de los resultados de 221 diagnosticos realizados, pone de manifiesto la redituabilidad de la rehabilitacion de los equipos, ademas de otras ventajas de caracter colectivo.

  5. The efficient use of the electric energy in underground water pumping systems in the Bajio (lowlands); El uso eficiente de la energia electrica en los sistemas de bombeo de agua subterranea en el Bajio

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, E [Irapuato (Mexico)

    1998-12-31

    In the Bajio region the underground water is the main source of drinking water and approximately constitutes 50% of the water used for agricultural purposes. From the energy standpoint pumping represents 33% of the electricity consumption and a wastage of 35% is estimated. In order to take care of this problem a methodology was designed for an energetic appraisal of the well pumping systems, with the basic objective of knowing the electro-mechanical efficiency of the equipment and the efficiency of the auxiliary equipment and the well hydraulic response. The analysis of the results of 221 diagnoses performed demonstrates the profitability of the equipment rehabilitation, plus other advantages of collective character . [Espanol] En la region del Bajio, el agua subterranea constituye la principal fuente de agua potable y aproximadamente, el 50% del agua para riego agricola; desde el punto de vista energetico, el bombeo de ella representa el 33% de la electricidad que se consume y se estima un desperdicio del 35%. Para atender la problematica, se diseno una metodologia para un diagnostico energetico de los sistemas de bombeo de los pozos, con el objetivo basico de conocer la eficiencia electro-mecanica de los equipos, el comportamiento de los equipos auxiliares y la capacidad de respuesta hidraulica del pozo. El analisis de los resultados de 221 diagnosticos realizados, pone de manifiesto la redituabilidad de la rehabilitacion de los equipos, ademas de otras ventajas de caracter colectivo.

  6. Microorganismos benéficos como biofertilizantes eficientes para el cultivo del tomate (Lycopersicon esculentum, Mill Beneficial microorganisms as efficient biofertilisers for tomato crops (Lycopersicon esculentum, Mill

    Directory of Open Access Journals (Sweden)

    Hernández Annia

    2005-12-01

    Full Text Available En el uso y manejo de biofertilizantes en la agricultura, uno de los principales problemas es el desconocimiento de las especies presentes en los agroecosistemas y en la rizosfera de los cultivos, para su posible utilización eficiente. Desde el punto de vista ecológico, es importante conocer los integrantes de la comunidad bacteriana que favorecen su aplicación como inoculantes y propician un efecto agrobiológico positivo en los cultivos agrícolas. Esta investigación se desarrolló con el objetivo de evaluar la efectividad agrobiológica de Azospirillum sp, en el crecimiento, desarrollo y rendimiento en el cultivo del tomate. Para ello, se partió de seleccionar el género microbiano predominante en la rizosfera del cultivo y posteriormente se evaluó el efecto de su inoculación a partir de la respuesta del cultivo. Los resultados demostraron que los géneros Pseudomonas, Azospirillum, Azotobacter, Bacillus y Streptomyces, forman parte de la comunidad microbiana de la rizosfera del tomate, en las condiciones estudiadas, y que Azospirillum es el género dominante. La inoculación artificial de esta rizobacteria causó un efecto positivo sobre el crecimiento de las plántulas, así como en el estado nutricional de las plantas, con un rendimiento agrícola superior a un 11 % con respecto a las plantas testigo. Se obtuvo un alto nivel poblacional en la rizosfera de las plantas inoculadas. Palabras clave: rizosfera, inoculante, crecimiento, rendimiento.One of the main problems regarding the efficient use and management of biofertilizers in agriculture lies in the unknown species present in agro-ecosystems and crop rhizospheres. From the ecological point of view, it is important to know the members of the bacterial population allowing them to be applied as inoculants and enable a positive agro-biological effect on agricultural crops. This investigation was aimed at evaluating the agro-biological effectiveness of Azospirillum sp. on tomato

  7. ¿Qué es una tecnología sanitaria eficiente en España? What is an efficient health technology in Spain?

    Directory of Open Access Journals (Sweden)

    J.A. Sacristán

    2002-08-01

    Full Text Available Introducción: A pesar del creciente reconocimiento de la potencial utilidad de los estudios de coste-efectividad, en España no existe ningún criterio que permita establecer si una determinada tecnología sanitaria puede considerarse rentable o no. El objetivo de este trabajo es describir cuáles han sido los límites y criterios utilizados en España para recomendar la adopción o el rechazo de intervenciones sanitarias en función de su coste-efectividad. Método: Se realizó una revisión de las evaluaciones económicas de intervenciones sanitarias publicadas en España desde 1990 hasta 2001. Se seleccionaron las evaluaciones económicas completas en las que el cociente coste-efectividad se había expresado como coste por año de vida ganado (AVG, como coste por año de vida ajustado por calidad (AVAC o como coste por vida salvada. Se analizaron las intervenciones sobre las que los autores establecieron algún tipo de recomendación (de adopción o rechazo, así como los criterios utilizados. Resultados: Veinte (20% de las 100 evaluaciones económicas completas publicadas cumplieron con los criterios señalados. En 16 de los estudios, los resultados se expresaron como coste por AVG, en 6 como coste por AVAC y en 1 como coste por vida salvada. Se evaluaron un total de 82 intervenciones sanitarias, en 44 de las cuales se realizó algún tipo de recomendación. Los autores recomendaron la adopción de todas las intervenciones sanitarias con un coste-efectividad inferior a 30.000 euros (5 millones de pesetas por AVG. Por encima de esa cifra no se apreció ninguna tendencia. Conclusiones: Si bien los resultados deben ser interpretados con mucha precaución, dadas las limitaciones del estudio, los límites de coste-efectividad presentados en este trabajo podrían constituir una primera referencia a lo que podría considerarse como una intervención sanitaria eficiente en España.Introduction: Despite the growing recognition of the potential

  8. Uso eficiente da água de chuva armazenada em cisterna para produção de hortaliças no Semiárido pernambucano

    Directory of Open Access Journals (Sweden)

    Elvis Pantaleão Ferreira

    2016-04-01

    Full Text Available O Semiárido brasileiro requer uma particular atenção, dada à irregularidade das precipitações pluviométricas que ocorrem na a região. A cisterna tipo Calçadão do programa Uma Terra e Duas Águas – P1+2 assegura melhoria na dieta alimentar das famílias rurais, por permitir a inserção de alimentação. Com o presente trabalho objetivou-se avaliar o uso eficiente da água empregada sob diferentes lâminas durante todo o ano de 2014, visando a produção de hortaliças no Semiárido pernambucano, com água de chuva armazenada em cisterna do P1+2. Para tanto, foram construídos dois canteiros, denominados 1 e 2, cada um com área de 4 m2, para produção de hortaliças, sendo aplicadas, respectivamente, lâminas de 8 mm dia-1 e 4 mm dia-1, durante todo o ano. Á água foi aplicada de forma manual, utilizando-se regador plástico. A melhor relação água/produção foi obtida com a aplicação de uma lâmina de 4 mm dia-1, suficiente para proporcionar o consumo diário de 33,71 gramas de hortaliças na alimentação de uma família.Efficient use of stored rain water in cistern to vegetable production in Semiarid pernambucanoAbstract: The Brazilian semiarid requires particular attention, given the irregularity of rainfall occurring in the region. The cistern program One Land and Two Waters - P1 + 2 ensures improvement in the diet of rural families by allowing the power input. The present study aimed to evaluate the efficiency of water used in different depths throughout the year 2014, aimed at producing vegetables in Pernambuco semiarid, with rainwater stored in cistern of P1 + 2. For this were constructed, two bed, called 1 and 2, each with an area of 4 m2 for vegetable production, and were applied, respectively, 8 mm blades day 1 and 4 mm Day-1 during the whole year. The water was applied manually, using plastic watering. The best result water/production was obtained with the application of a lamina 4 mm per day, sufficient to provide

  9. Evaluación del efecto de microorganismos eficientes en agua de bebida suministrada a pollos Ross X Ross en la granja Tunguavita

    Directory of Open Access Journals (Sweden)

    Suren Angélica García-Vera

    2011-02-01

    Full Text Available El uso  de Microorganismos  Eficientes  (ME  en avicultura permite  aumentar  la productividad  y rentabilidad, además de mejorar las condiciones sanitarias de  la producción, convirtiéndolos en una técnica de suplementación sencilla, que permite optimizar  los  recursos para  el mejoramiento de las explotaciones avícolas. Con el fin de evaluar el  efecto de  los ME  sobre  algunos  parámetros productivos, se realizó este trabajo con pollos de engorde de la raza Ross X Ross. Se seleccionaron de  forma  aleatoria  90  aves,  las  cuales  fueron divididas  en  tres  grupos,  con  tres  repeticiones, respectivamente.  Al  tratamiento  uno  se  les administró ME durante  toda  la producción, a razón de 1 mL por cada 2.000 mL de agua (semanas 1, 7, 8 y 1mL por cada 1.000 mL de agua (semanas 2-6. Al  tratamiento  dos  se  les  administró ME durante toda la producción, a razón de 5 mL por cada 2.000 mL de agua (semanas 1, 7, 8 y 5 mL por  cada  1.000 mL  de  agua  (semanas 2-6.  El tratamiento  tres  correspondió  al  tratamiento control. Se realizó pesaje y recolección de heces cada  semana,  durante  las  8  semanas  de  la producción y se comprobó que en los grupos en los  que  se  usó ME  se  produjo  un  aumento significativo de conversión alimenticia y, por  lo tanto, de ganancia de peso en comparación con el  tratamiento control; en cuanto la concentración amoniacal en heces, ésta disminuyó notablemente en los tratamientos 1 ý 2.

  10. Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

    Energy Technology Data Exchange (ETDEWEB)

    Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

    1986-12-31

    A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

  11. Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

    Energy Technology Data Exchange (ETDEWEB)

    Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

    1985-12-31

    A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

  12. Propuesta para promover el manejo eficiente del recurso hídrico en la microcuenca alta del Río Botello en el Municipio de Facatativá, desde el marco de la gestión integral del agua

    OpenAIRE

    Vega Mendoza, Helmer

    2011-01-01

    Este trabajo tiene como propósito principal, contribuir con futuras acciones de gestión, que se realicen sobre la microcuenca alta del Río Botello en el municipio de Facatativá, para que se propenda por su manejo eficiente, que involucra la distribución equitativa y calidad. Los aportes se consolidan a partir de la revisión bibliográfica sobre el tema, relacionada con autores que han desarrollado su experiencia desde la investigación en diferentes regiones, de acuerdo a éstas, se formula la p...

  13. Diseño y simulación de un sistema de iluminación natural energéticamente eficiente de una planta industrial dedicada a la limpieza, selección y envasado de patata

    OpenAIRE

    GARCÍA SIMARRO, MARÍA PAZ

    2016-01-01

    [ES] Este Trabajo Final de Grado, tiene como objetivo el estudio del sistema de iluminación natural de una planta industrial destinada a la limpieza, selección y envadado de patatas, de forma que se diseñará un sistema de iluminación artificial para conseguir una mejora de la iluminación energéticamente eficiente y que proporcione un ahorro en el consumo de energía eléctrica. En las primeras páginas se presenta la planta estudiada dentro de su contexto productivo, se conocer...

  14. Análisis de programas sobre estufas eficientes de cocción con leña: estudio de caso en dos comunidades de la Huasteca Potosina

    OpenAIRE

    Rentería Guzmán, Yei Jazmín

    2011-01-01

    El uso de biocombustibles para cocinar provoca una serie de problemáticas a la salud de los individuos y del ecosistema. Debido a esta problemática se han diseñado diferentes estrategias y tecnologías como las denominadas estufas eficientes ya que son en el corto plazo una opción para las familias que dependen de los combustibles sólidos. Sin embargo, los diferentes proyectos encargados en diseminar este tipo de tecnologías han experimentado diferentes limitaciones por una serie de fac...

  15. Hydraulic design of embankment stepped chutes: a methodology based on an experimental study; Diseno hidraulico de vertedores escalonados con pendientes modernas: metodologia basada en un estudio experimental

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Carlos A; Chanson, Hubert [Universidad de Queensland (Australia)

    2007-04-15

    escalonados se usan como vertedores y/o canales para peces en presas y diques, como disipadores de energia en canales y rios, o como aireadores en plantas de tratamiento y torrentes contaminados. Diversos investigadores han estudiado el flujo en vertedores escalonados, enfocandose en estructuras de gran pendiente ({theta} {approx} 45 grados), por lo que a la fecha, el comportamiento del flujo sobre vertedores con pendientes moderadas ({theta}15 a 30 grados) no ha sido totalmente entendido. El presente articulo comprende un estudio experimental de las propiedades fisicas de flujo aire-agua sobre canales escalonados con pendientes moderadas tipicas en presas de materiales sueltos. Un extenso rango de gastos en condiciones de flujo rasante se investigo en dos modelos experimentales a gran escala (L{sub e} = 3 a 6): un canal con pendiente 3.5H:1V ({theta}16 grados) y dos alturas de escalon distintas (h = 0.1 y 0.5 m), y un canal con pendiente 2.5H:1V ({theta} 22 grados) y una altura de escalon de h = 0.1 m. Los resultados incluyen un analisis detallado de las propiedades del flujo en vertedores escalonados con pendientes moderadas y un nuevo criterio de diseno hidraulico, el cual esta basado en los resultados experimentales obtenidos.

  16. La reivindicación de competencias de Colombia Compra Eficiente por el Consejo de Estado: ¿nuevo alcance de la potestad reglamentaria o interpretación extensiva de la ley por la jurisprudencia?

    Directory of Open Access Journals (Sweden)

    Mónica Safar Díaz

    2017-12-01

    Full Text Available La discusión sobre la naturaleza jurídica de los documentos expedidos por la Agencia Nacional de Contratación no es un asunto del todo tranquilo en la academia y la doctrina, pero con ocasión de un reciente pronunciamiento del Consejo de Estado sobre las competencias de Colombia Compra Eficiente es importante dimensionar el alcance de los mismos a partir del estudio de la naturaleza jurídica de la entidad, la órbita de la potestad reglamentaria en la atribución de funciones a dicha entidad y el impacto que ello puede tener en el concepto de la descentralización territorial.

  17. Elección del escenario eficiente del plan de transmisión del Perú 2013 - 2022 incluyendo la demanda de autos eléctricos

    OpenAIRE

    Ureta Miller, Gustavo Adolfo

    2014-01-01

    El fin del presente estudio fue el de garantizar que la oferta eléctrica abastezca la demanda eléctrica en el Perú sin disminuir el mínimo de las reservas eléctricas históricas; estuvo dirigido a evaluar el comportamiento de la demanda dentro de| plan de transmisión del Perú 2013-2022, ante la masificación del uso en el servicio de taxi en Lima de los autos eléctricos; el objetivo general fue el de elegir el o los escenarios eficientes del plan de transmisión referido. The purpose of the f...

  18. Operación eficiente de los bloques generador-transformadores en las unidades de generación distribuida; Efcient operation of generator-transformers blocks in distributed generations units

    Directory of Open Access Journals (Sweden)

    Marcos A. de Armas Teyra

    2012-11-01

    Full Text Available Este trabajo determinó la operación más eficiente de los bloques generador-transformador que entregan la energía eléctrica generada a una red de tensión superior. Hasta el momento la mayoría de los estudios realizados en este campo se basan en un análisis de la eficiencia relacionado con elestado de carga del conjunto. Este artículo propone un método para evaluar la eficiencia desde un espacio tridimensional que arroja una mejor solución al considerar el factor de potencia en el sistema. La optimización se realiza mediante la técnica de inteligencia artificial denominada enjambre departículas. El método propuesto puede emplearse para efectuar la compra o la selección del transformador más apropiado y para lograr la operación de estas unidades de la forma más eficiente y económica posible. Se muestra su aplicación a una unidad de 1150 kVA en la Provincia de Cienfuegos, Cuba.  In this paper was determined the most efficient operation of generator-transformers blocks of distributed generation unites that are operating to serve the electric power to a higher voltage grid. For this purpose, a tridimensional model of efficiency with better results is proposed taking into account the combined losses of the generator and transformer, the load level and the power factor of the system. In the optimization process a Particle Swarm algorithm was employed. The developed method can beused to select the transformer and to obtain the most efficient operation of these power plants as it is possible in field conditions. As an example its application to a 1150 kVA generation unite of Cienfuegos´s Province is shown.

  19. Design and construction of a go-kart hybrid PEM fuel cell / rechargeable battery; Diseno y construccion de un go-kart hibrido pila de combustible PEM / bateria recargable

    Energy Technology Data Exchange (ETDEWEB)

    Suarez Alcantara, Karina; Rodriguez Castellanos, Andres; Soloza Feria, Omar [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: k.suarez.alcantara@gmail.com

    2008-11-15

    An hybrid Polymer Electrolyte Membrane Fuel Cell, PEMFC-Rechargeable Battery Go-kart has been designed and manufactured using AutoCAD software for the design and a CNC mechanical machine for the manufacture of components of the fuel cell. The membrane-electrode assemblies, MEAs, were integrated with a Gore-Select membrane and carbon cloth with Pt (20 wt % /C) 0.5 mg/cm{sup 2} anode and cathode electrode catalysts loading. High density graphite collector plates with 5mm thickness were used as collector plates. The estimated weigh of the go-kart with a driver is about 120 kg. The demand of the motor of the go-kart is 20 V and 5 A (100W), supplied by an hybrid system integrated by three 30Watts PEMFC. The commercially available Pb/acid rechargeable battery supplies energy for peripheral equipment. [Spanish] En este trabajo se presenta el diseno y la construccion de un go-kart hibrido pila de combustible con membrana de conduccion protonica tipo PEM (Proton Exchange Membrane, por sus siglas en ingles) y pila recargable. El diseno de los colectores de corriente de la pila se realizo utilizando el programa AutoCAD y la construccion mediante una fresadora con control numerico, CNC. Los ensambles membrana-electrocatalizador de la pila estan formados por membranas Gore-Select y por electrodos de Pt soportado en tela de carbon al 20 %peso/C con carga de 0.5 mg /cm{sup 2}, en anodo y catodo. Los platos colectores de corriente fueron manufacturados en grafito de alta densidad con espesor de 5 mm. La caracterizacion de la pila de combustible se realizo mediante ensayos de polarizacion potenciostatica. El peso total del go-kart y una persona a bordo es de 120 kg. La potencia del go-kart es generada por un motor de corriente directa de 20 V y 5 A (100 Watts). Para tal efecto, se construyeron tres pilas de combustible de 30 W cada una, con un respaldo de baterias recargables comerciales de Pb/acido para energizar equipos perifericos.

  20. Design of a seismic energy dissipator for an interruptor type 3AS2-45; Diseno de un disipador de energia sismica para un interruptor tipo 3AS2-45

    Energy Technology Data Exchange (ETDEWEB)

    Castro Felix, Jaime

    2004-02-15

    With the aid of the theory behind seismically isolated structures and the bi-linear behavior of an isolated system of Multiple Degrees of Freedom (MDOF), the information obtained on the spectral analysis is complemented with the purpose of simulating one itself for the design of a dissipator of seismic energy. The seismicity in the world is briefly explained, (in Mexico in special for the Geothermal Field of Cerro Prieto), the types of earthquakes, etc., to give way to a documentation of the state-of-the-art in advanced seismic resistant systems and to a procedure to establish the level of seismic qualification of electrical equipment from the level of seismic performance for the Mexican Republic. [Spanish] Con la ayuda de la teoria detras de estructuras aisladas sismicamente y el comportamiento bilineal de un sistema de aislamiento de Multiples Grados de Libertad (MDOF), se complementa la informacion recabada sobre el analisis espectral con el fin de simular uno propio para el diseno de un disipador de energia sismica. Se explica brevemente la sismicidad en el mundo, en Mexico, en especial el Campo Geotermico de Cerro Prieto, los tipos de sismos, etc., para dar paso a una documentacion del estado del arte en sistemas sismorresistentes avanzados y a un procedimiento para establecer el nivel de calificacion sismica de equipos electricos a partir del Nivel de desempeno sismico para la Republica Mexicana.

  1. Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, G.; Heard, Ch.; Sanchez Viveros, A. [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

    1997-12-31

    Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

  2. Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, G; Heard, Ch; Sanchez Viveros, A [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

    1998-12-31

    Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

  3. Monitorización de la Condición Física de Personas en Espacios Confinados Mediante Etiquetas RFID con Sensores y Redes Inalámbricas Eficientes

    Directory of Open Access Journals (Sweden)

    Javier G. -Escribano

    2011-10-01

    Full Text Available Resumen: La situación y la condición física de los trabajadores que realizan su labor en el interior de ciertos espacios confinados o peligrosos es una información muy importante. Las empresas de seguridad laboral consideran crucial obtener tal información para poder observar y determinar los riesgos potenciales a los que el personal puede estar sometido. Los sistemas que se han venido utilizando no incluyen en la mayoría de los casos la monitorización personalizada de cada individuo. En este trabajo se ha diseñado un sistema basado en “Wireless Sensor Networks” energéticamente eficientes y RFID para conseguir el posicionamiento y la monitorización de personas que trabajan en el interior de espacios confinados potencialmente peligrosos. El sistema diseñado es capaz de identificar a cada trabajador, localizarlo y enviar datos relativos a su situación física tanto si éste se encuentra en un espacio libre como cerrado. Además, en situaciones de emergencia como caídas libres o pérdidas del conocimiento, el sistema envía una alarma. Los resultados demuestran que la utilización de este sistema permite conocer en tiempo real, y de forma energéticamente eficiente, la posición de cada trabajador, y analizar el riesgo potencial al que el mismo se expone en cada momento. Al mismo tiempo, en caso de emergencia, el sistema permite una mayor rapidez en la intervención ya que por un lado, se sabe dónde y porqué se ha producido la alarma; y por otro, se conocen las condiciones físicas del trabajador en ese momento. Palabras clave: Acelerómetros, Sistemas de Emergencia, Control Automático, Redes, Ingeniería de Sistemas, Algoritmos de Enrutamiento, Transceptores, Telecomunicaciones

  4. Investigación y conservación de la biodiversidad en Perú: importancia del uso de técnicas modernas y procedimientos administrativos eficientes

    Directory of Open Access Journals (Sweden)

    Rudolf von May

    2013-06-01

    Full Text Available Este comentario resalta la importancia que el análisis de secuencias de ADN tiene en los estudios de biodi-versidad y la necesidad de mejorar los procedimientos administrativos concernientes a las investigaciones de biodiversidad en el Perú. La rápida pérdida de la biodiversidad y recursos naturales del Perú justifican la urgencia de apoyar aquellas investigaciones que ayuden a identificar, describir y caracterizar a la biodiversidad en la brevedad posible, para que se puedan tomar las debidas medidas de conservación y mitigación. Enfatizamos la importancia del uso de técnicas modernas dentro del modelo de estudio de la taxonomía integradora, incluyendo el estudio de los procesos evolutivos asociados a áreas con mayor diversidad y endemismo y los efectos del cambio climático sobre la biodiversidad peruana. Asimismo, es esencial que las entidades gubernamentales encargadas de evaluar los planes, solicitudes y requisitos asociados a las investigaciones de la biodiversidad del Perú reconozcan y apoyen el enfoque de la taxonomía integradora. El uso de técnicas modernas dentro del modelo de la taxonomía integradora, junto a procedimientos administrativos eficientes, puede convertirse en la mejor herramienta para proteger la biodiversidad peruana.

  5. Aplicación y evaluación de diferentes algoritmos genéticos canónicos en el diseño eficiente de redes de radio frecuencia en comunicaciones inalámbricas

    Directory of Open Access Journals (Sweden)

    Daniel Antonio Molina

    2014-06-01

    Full Text Available La difusión de servicios inalámbricos de comunicación (telefonía, internet, etc es cada vez mayor en la actualidad. El costo de los equipamientos necesarios para brindar el servicio con calidad adecuada es elevado. La selección de un conjunto de puntos geográficos que permitan una cobertura óptima de una señal de radio frecuencia minimizando uso de recursos es fundamental. A esta tarea se la denomina diseño de la red de radio y es un problema NP – duro de optimización, por lo tanto, es factible de ser tratado con metaheurísiticas. Las metaheurísiticas son métodos que integran procedimientos de mejora local y estrategias de alto nivel para realizar una búsqueda robusta en el espacio del problema.El presente trabajo propone analizar y evaluar la capacidad de tres algoritmos genéticos canónicos de encontrar una solución aceptable mediante una función objetivo que combina el grado de cobertura del terreno y el uso eficiente de recursos en diferentes escenarios poblacionales. Los resultados obtenidos son promisorios.

  6. Proposed method for the hydraulic design of ski-jump energy dissipators in dam spillways considering the occurrence of scour holes downstream of the structure; Metodo propuesto para el diseno hidraulico de trampolines empleados como disipadores de energia en aliviaderos para presas, considerando la ocurrencia del cono de socavacion al pie del mismo

    Energy Technology Data Exchange (ETDEWEB)

    Pardo-Gomez, Rafael [Centro de Investigaciones Hidraulicas (Cuba)

    2008-04-15

    Ski-jump energy dissipators are widely used in hydraulic engineering because of their well-known effectiveness. Nevertheless, some uncertainty exits associated with the dimensions of the scour hole appearing downstream of the structure. This paper presents a new method for solving this problem. This method includes spillway stability checking as part of the design process and also stability checking of any other construction near the energy dissipation zone. [Spanish] Los disipadores de energia tipo trampolin tienen amplia utilizacion en la practica de la ingenieria hidraulica por su probada eficacia; sin embargo, su diseno esta sujeto a cierto grado de incertidumbre en cuanto a la prediccion de las dimensiones del cono de socavacion que habra de producirse aguas abajo de la estructura. En el presente trabajo se muestra un metodo novedoso, mediante el cual el autor soluciona el aspecto antes referido, toda vez que se incluye como parte del proceso de diseno la comprobacion de la estabilidad del propio aliviadero o de cualquier otra obra cercana a la zona de disipacion de energia.

  7. Evaluation of the impact of two flow field designs with bipolar plate flow on the performance of a PEM fuel cell; Evaluacion del impacto de dos disenos de campo de flujo de placa bipolar en el desempeno de una celda de combustible tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Loyola-Morales, F.; Cano-Castillo, U. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: feloyola@yahoo.com.mx

    2009-09-15

    The flow field (FF) designs of bipolar plates play a fundamental role in the performance of a set of PEM fuel cells. The FF is directly related with diverse processes that occur inside the cells, such as: feeding and uniform distribution of reactant gases and the handling of water produced by the overall electrochemical reaction. Therefore, a FF design that promotes each one of those processes in an optimal manner is of utmost importance to attain the best performance of a set of fuel cells. The present work evaluated the impact of two different FF on the performance of a fuel cell. The FF designs evaluated were 4 serpentine and parallels (4SP) and 2 serpentine counter flow (SC). The stability tests for the operation of the cell applied to each of the flow fields were: flood tolerance, dehydration tolerance conditions and stoichiometry performance of 1.1, 1.3, 1.5 and 2.5. The 4SP design showed high performance stability during operation with a gradual process of flooding the system and operating at different stoichiometries. Only for the test with dehydration conditions was there a gradual decrease in its performance, of up to 27%. Compared to these results, the SC design showed a rapid fall of 45% in its performance when operating under gradual flooding of the system, a constant fall in its performance (also around 45%) with stoichiometries of 1.1, 1.3 and 1.5 due to accumulation of water, and only with a stoichiometry of 2.5 did it have highly stable performance as a result of good water handling. In the test of operations under dehydration conditions, the performance of the SC design dropped to 40% and remained at this value during the rest of the test. According to these results, the performance of the 4SP design was more stable than the SC design for all of the tests implemented. [Spanish] Los disenos de campo de flujo (CF) de las placas bipolares tienen un papel fundamental en el desempeno de un conjunto de celdas de combustible tipo PEM. Los CF tienen una

  8. Application of scale test modules for model the electrothermal performance in buildings for the efficient use of energy; Aplicacion de modulos de prueba a escala para modelar el funcionamiento electrotermico de edificios para el uso eficiente de la energia

    Energy Technology Data Exchange (ETDEWEB)

    Acoltzi Acoltzi, Higinio

    2000-10-01

    and small vault pottery with glass sun reflector (34% in the experimental model and 37% in the theoretical model). [Spanish] La investigacion para acondicionamiento de espacios por enfriamiento en edificios de tamano real tiene un costo elevado por la cantidad de materiales y la variedad de parametros que intervienen. Por lo anterior, en este trabajo se utilizan modulos de prueba a escala acoplados a sistemas de aire acondicionado para obtener su respuesta electrotermica; es decir, cuantificar la cantidad de energia electrica que consumira un modulo en funcion de los materiales de prueba. Se analiza un modelo termico teorico transitorio y las pruebas experimentales del comportamiento termico de modulos de prueba a escala por la variacion de los materiales de los techos y ventanas, desarrollado con el objeto de establecer criterios de aplicacion de dichos materiales en las industrias de la edificacion. Adicionalmente se presenta el desarrollo de un modelo electrotermico teorico en estado permanente, que define el comportamiento del consumo de energia electrica, para mantener las condiciones de confort al interior de los modulos de prueba respecto a la variacion de los materiales mencionados. Se presenta tambien el diseno y el desarrollo de las pruebas experimentales utilizando los modulos de prueba a escala para validar el modelo electrotermico. La experimentacion se desarrolla exponiendo los modulos de prueba a escala, acoplados a los equipos de aire acondicionado, a la radiacion solar directa, registrando el consumo de energia electrica de los equipos de aire acondicionado, la radiacion solar sobre techo y ventanas de prueba, la temperatura interior de los modulos, la temperatura interior y exterior en la superficie de los techos de prueba, la temperatura ambiente, y la velocidad del viento. Los resultados obtenidos comparando las mediciones en campo y el modelo electrotermico teorico desarrollado, presentan diferencias promedio de 16%. Los ahorros de energia

  9. Architecture's models: Integral thermal evaluation; Modelos en arquitectura: evaluacion termica integral

    Energy Technology Data Exchange (ETDEWEB)

    Roset, Jaume [Universidad Politecnica de Cataluna, Barcelona (Spain); Marincic, Irene; Ochoa, J. Manuel [Universidad de Sonora, Hermosillo, Sonora (Mexico)

    2000-07-01

    During the fist stages of a building design, considering energy conscious design, inhabitants needs and functionality, it is necessary to estimate and evaluate the buildings behavior and to know if it achieves the initial design objectives. Models are used to represent a description of objects and architectural concepts, as well as the hypothesis of its temporary and spatial behavior. The quantity and type of information needed as input of a model to be operative, has been, and still is, a controversial topic. The question is: how much useful are models that need a great quantity of inputs than other simpler ones? We consider as simple models those that habitually contain a certain quantity of empirical coefficients, which permit to reduce the number of inputs, solving the calculus as an approximation. In the other hand, in the architectural domain, information is usually presented in different type of supports (tables of numerical values, planes, physical models, ...). The information supplied in each type of support must necessary be combined, in order to maximize the information contained in the global system. In this paper, we present examples of thermal studies dealing with different ways to evaluate models, which involve variables of thermal behavior of buildings, the interaction between them and the environment and its influence on the indoor thermal comfort. As a general conclusion, we can say that a model should minimize the quantity of inputs required, which must be able to approach to the most relevant effects, that nearly represent the real behavior. The hypothesis and evaluation conditions of these effects must be understood and assumed by the user. [Spanish] Durante las etapas previas al diseno de un edificio eficiente energeticamente y coherente con las necesidades de sus usuarios y con su funcion, sera necesario estimar y evaluar su comportamiento para saber en que medida se estan logrando los objetivos de diseno planteados inicialmente. Con este

  10. Design and construction of the prototype of a digital meter of single phase electric energy based in a microcontroller; Diseno y construccion del prototipo de un medidor digital de energia electrica monofasico basado en un microcontrolador

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Alonso, Ruben

    2003-10-15

    This research work presents the design and construction of a single-phase microcontroller-based digital electric energy meter. The digital instrument displays the energy demand (kw-h) based on up-to-date tariff provided by the Mexican national utility Comision Federal de Electricidad (CFE). The meter digitally processes voltage and current line waveform samples taken at its input, displaying, in real time, the number of electrical parameters calculated. For a better instrument performance a PIC16F874 microcontroller from microchip has been used as computational core. The parameters of interest are visualized in a liquid crystal display of 2 X 16 characters. The user interface includes a menu where some of the parameters can be selected by the operator. In the event of an electric power supply disruption the meter keeps to the energy consumption in memory. The voltage and current measured levels ranges from 1 to 255 Vrms and 0.1 to 25.5 Arms, respectively. The power is displayed in 5 digits ranging from 0 to 6502.5 watts and the energy is displayed with 5 whole digits and 5 decimals ranging, from 0 kWh up to 99999.99999 kWh. These values are refreshed every one second together with the actual electrical consumption cost which ranges from 0 up to 9999.9 pesos. The digital measuring instrument has been built based on four main inter-connected modules named, data acquisition; signal conditioning; signal processing; and display. A set of efficient assembly code routines has been developed in order to calculate the number of electrical parameter previously described. After a debugging process, the optimised code has been assembled for the PIC16F874. [Spanish] El trabajo presenta el diseno y construccion de un medidor digital de energia electrica basado en un microcontrolador, el cual visualiza la demanda por el consumo de kWh, basandose en una tarifa escalonada de tipo domestico de CFE. Tambien el aparato visualiza voltaje, corriente, potencia y el tiempo de medicion

  11. Design and integration of an essay model for motorcycles within the project of emissions norm for the federal district government, Mexico; Diseno e integracion de un modulo de ensayos para motocicletas para el proyecto de normativa de emisiones del GDF

    Energy Technology Data Exchange (ETDEWEB)

    Rincon Gomez, Pedro Ignacio

    2004-02-15

    el fin de estudiar las emisiones de los vehiculos que poseen motores de combustion interna. Para poder hacer esto se vale de diferentes instrumentos de medicion, como son: analizadores de gases, dinamometros, etc. Algunos instrumentos o dispositivos que solo pueden adquirirse en el extranjero son disenados en este laboratorio con la asesoria de la Coordinacion de Instrumentacion del Instituto de Ingenieria. El desarrollo de estos dispositivos permite que el laboratorio cuente cada vez con mas equipo util adecuado a sus necesidades. En la presente tesis se muestra el desarrollo de un proyecto del Laboratorio de Control de Emisiones; se trata de la instrumentacion electronica de un banco dinamometrico para motocicletas, con el fin de cooperar en la generacion de la Norma Oficial Mexicana de emisiones contaminantes de este tipo de vehiculos, en conjunto con las autoridades gubernamentales del Distrito Federal. Para poder hacer esto se diseno por completo este dispositivo, de modo que pudieran hacerse mediciones automaticas de velocidad, distancia, tiempo, par, potencia, concentraciones de oxigeno, bioxido de carbono, monoxido de carbono, oxidos de nitrogeno e hidrocarburos, para generar una base de datos. En el desarrollo de este proyecto se utilizo una computadora personal y una tarjeta de adquisicion de datos para adquirir las senales electronicas de sensores de par y velocidad. El software que se utiliza para controlar la tarjeta de adquisicion de datos fue desarrollado con un software de desarrollo de uso dedicado para instrumentacion, lo que permitio generar un instrumento virtual muy versatil y de facil manejo. Actualmente el banco dinamometrico para motocicletas opera como un instrumento mas del laboratorio y se piensa que en el futuro pueda formar parte del equipo en un centro de verificacion para este tipo de vehiculos.

  12. Indicadores para seleccionar inóculos de hongos micorrícicos arbusculares eficientes en suelos moderadamente ácidos Indicators to select efficient arbuscular mycorrhizal fungi inocula in moderately acidic soils

    Directory of Open Access Journals (Sweden)

    F Covacevich

    2010-07-01

    Full Text Available En ocasiones los propágulos de hongos micorrícicos arbusculares (HMA en los suelos pueden estar en bajo número o éstos no ser eficientes para aumentar el crecimiento de las plantas hospedadoras. La estrategia sería recurrir a la inoculación con HMA (nativos o no. Si la inoculación se realiza con HMA no nativos, debe considerarse que los suelos difieren en su receptividad a los HMA a ser introducidos. El objetivo del trabajo fue seleccionar algunos indicadores de presencia, actividad y beneficio de la simbiosis planta-HMA no nativos para ser utilizados como inóculos en suelos moderadamente ácidos. Para ello, se evaluó cómo la inoculación con HMA incidió sobre la colonización micorrícica y algunos parámetros de crecimiento en una planta modelo crecida en dos suelos moderadamente ácidos de diferente origen (Argentina y Francia. En el suelo de la Argentina la inoculación con Glomus claroideum y Acaulospora longula ocasionaron los mayores grados de micorrización total y con actividad fosfatasa alcalina (ALP así como las mayores respuestas micorrícicas (RM. En el suelo de Francia, el mayor crecimiento y cantidad de raíz micorrizada se obtuvieron por la inoculación con A. longula. La inoculación con Scutellospora pellucida presentó adecuada RM en el suelo de la Argentina, pero nula en el suelo de Francia. G. clarum manifestó una alta capacidad micotrófica, aunque una baja eficiencia para ser utilizado en los suelos testeados. Asimismo, la inoculación con A. laevins presentó los más bajos niveles de colonización y las menores respuestas de crecimiento en ambos suelos. El análisis directo de los parámetros, así como el análisis multivariado entre la RM y los parámetros de micorrización y crecimiento mostraron que la combinación entre los parámetros de peso aéreo y de producción de raíces con los de colonización micorrícica (total y con actividad ALP resulta adecuada para identificar de manera rápida las

  13. Pirotubular boilers design. Diseno de calderas pirotubulares

    Energy Technology Data Exchange (ETDEWEB)

    Latre Durso, F. (Geval S.A. (Spain))

    1994-01-01

    This article describes the conceptual design of Pirotubular boilers from the valuable thermal point of view, to the dimensional. This topic is a very tool valuable for professionals of design and for maintenance and operation equipment.

  14. Diseno macromolecular par transferencia de cadena

    NARCIS (Netherlands)

    Heuts, J.P.A.; Munoz Bonilla, A.

    2010-01-01

    In this overview article, a brief description and discussion is given about the controlled radical techniques which are based on chain transfer, i.e., Catalytic Chain Transfer (CCT) and Reversible Addition-Fragmentation chain Transfer (RAFT). The CCT is an incredibly efficient method for making

  15. Analysis and design of a dish/Stirling system for solar electric generation with a 2.7 kW air-cooled engine; Analisis y diseno de un sistema de generacion electrica termosolar con concentrador de disco parabolico y motor Stirling de 2.7 kW enfriado por aire

    Energy Technology Data Exchange (ETDEWEB)

    Beltran-Chacon, R.; Velazquez-Limon, N. [Universidad Autonoma de Baja California, Baja California (Mexico)]. E-mails: rbeltran1@uabc.edu.mx; nicolas.velazquez@uabc.edu.mx; Sauceda-Carvajal, D. [Universidad Politecnica de Baja California, Baja California (Mexico)]. E-mail: dsaucedac@upbc.edu.mx

    2012-01-15

    This paper presents a mathematical modeling, simulation and design of a solar power system of a parabolic dish with an air-cooled Stirling engine of 2.7 kW. The model used for the solar concentrator, the cavity and the Stirling engine were successfully validated against experimental data. Based on a parametric study, the design of the components of the engine is carried out. The study shows that as system capacity increases, the overall efficiency is limited by the power required by the fan, since the design of the cooler needs greater amounts of heat removal by increasing the air flow without affecting the internal conditions of the process (mass flow of working gas and internal dimensions of the same). The system was optimized and achieves an overall efficiency of solar to electric energy conversion of 26.7%. This study shows that the use of an air-cooled Stirling engine is potentially attractive for power generation at low capacities. [Spanish] Este trabajo presenta un modelado matematico, la simulacion y diseno de un sistema de generacion electrica termosolar de disco parabolico con motor Stirling de 2.7 kW enfriado directamente por aire. El modelo utilizado para el concentrador, la cavidad y el motor Stirling, fueron validados satisfactoriamente con datos experimentales. Con base en un estudio parametrico se realizo el dimensionamiento de los componentes del motor. El estudio realizado muestra que conforme se incrementa la capacidad del sistema, la eficiencia global se ve limitada por la potencia requerida por el ventilador, dado que el diseno del enfriador necesita retirar mayores cantidades de calor aumentando el flujo de aire, sin afectar las condiciones internas del proceso (flujo masico del gas de trabajo y dimensiones internas del mismo). El sistema fue optimizado obteniendo una eficiencia global de conversion de energia solar a electrica de 26.7%. Este estudio muestra que el uso de un motor Stirling enfriado directamente por aire es potencialmente

  16. A inclusão de ações da América Latina sob o ponto de vista do investidor brasileiro: inferências sobre os pesos na fronteira eficiente The inclusion of Latin American stocks for brazilian investors: inferences about efficient portfolio weights

    Directory of Open Access Journals (Sweden)

    Marco Antonio Cunha de Oliveira

    2009-06-01

    Full Text Available O problema de como alocar recursos de forma eficiente tem sido uma das questões fundamentais em Finanças. Se os fatores domésticos tendem a fazer com que os ativos num determinado mercado se movimentem em conjunto, os investidores procuram diversificar o risco nacional pela aplicação em outros mercados. Este tema tem sido tipicamente analisado no contexto retorno-risco, entretanto, um dos maiores problemas é por não reconhecer a incerteza nos parâmetros de entrada, dando origem ao risco de estimação. Este trabalho analisa se a alocação em ações de outros países da América Latina permite melhorar a fronteira eficiente sob o ponto de vista do investidor brasileiro. É utilizada a combinação de inferências estatísticas propostas por Britten-Jones (1999 para portfólios de tangência e Kempf e Memmel (2006 para o portfólio de risco mínimo global. Os resultados permitiram verificar que a adição do investimento em ações de outros países latinos melhoraria a fronteira eficiente sob o ponto de vista do investidor local, com pesos estatisticamente significantes.Allocating resources efficiently has been one of the major issues in Finance. If domestic factors are the key reasons for local assets to move together, the investor should search for other markets in order to diversify the local risk. This topic has been analyzed considering the risk-return tradeoff. However, one of the main problems is not taking the uncertainty input parameters into account triggering estimation risk concerns. This article analyzes whether the inclusion of stocks from other Latin American countries improve the efficient frontier from a Brazilian investor's point of view. The combination of inferences about tangency portfolio (Britten-Jones, 1999 and global minimum risk portfolio (Kempf e Memmel, 2006 was implemented. From the results, it can be concluded that the inclusion of other Latin American stocks would improve the efficient frontier for local

  17. Power Reactor Design at Zero Power; Etudes de Reacteurs de Puissance, au Moyen de Machines de Puissance Zero; Konstruktsiya ehnergeticheskogo reaktora nulevoj moshchnosti; Diseno de Reactores Generadores con Ayuda de Reactores de Potencia Nula

    Energy Technology Data Exchange (ETDEWEB)

    Redman, W. C.; Plumlee, K. E.; Baird, Q. L. [Argonne National Laboratory, Argonne, IL (United States)

    1964-02-15

    de los elementos combustibles de oxido de uranio-oxido de torio en agua pesada, destacando principalmente los datos necesarios para el diseAo de un segundo cuerpo para el reactor experimental de agua hirviente de Argonne; 2. Preparacien de una maqueta de reactor de investigacion de flujo elevado que permitira veriflcar los calculos efectuados durante el estudio, determinar la geometrra optima y evaluar el efecto de la combustion; 3. Determinacion de las distribuciones energeticas y del efecto de inmersion de los elementos combustibles sobre la reactividad en el caso de un reactor de agua hirviente con sobrecalentador incorporado; 4. Diseflo de un cuerpo de reactor reproductor plutonfgeno de neutrones ripidos, refrigerado por sodio y alimentado con {sup 235}U, que constituiri la carga inicial del segundo reactor reproductor experimental (EBR-II) de Argonne; 5. Estudio de las caracterfcticas de un reactor de dos zonas (termica y rapida) que sufren interaccidn. Al discutir estos programas, los autores explican tambien en que factores se basd la eleccion de los experimentos en conjuntos exponenciales y criticos sin envenenamiento en maquetas de potencia nula, asi como de los experimentos in situ, que sirvieron para obtener los datos necesarios. Tambien describen la importancia de los trabajos analiticos complementarios. La memoria presenta ejemplos especfficos para demostrar en que medida se pueden obtener datos sobre el diseno del reactor antes de explotarlo en regimen normal. Entre estos datos se cuenta el margen de paro, el exceso de reactividad necesario para el funcionamiento, los coeficientes de temperatura, la eficacia de las barras de control y de seguridad, la cinetica del reactor, los esquemas de produccion de energia, los requisitos que ha de cumplir la fuente neutronica de puesta en marcha, y la sensibilidad de los instrumentos, los blindajes y la economfa neutronica. El estudio de los experimentos realizados recientemente con reactores de potencia nula

  18. A Relação entre o Ingresso ou Saída de Empresas do Índice de Carbono Eficiente (ICO2 e sua Rentabilidade = The Relationship Between entry or Exit of Companies from Carbon Efficient Index (ICO2 and Their Profitability

    Directory of Open Access Journals (Sweden)

    Vinicius Mothé Maia

    2015-12-01

    Full Text Available A preocupação ambiental e social nas ações humanas não é fato exclusivo do século XXI. A política pública ambiental brasileira, por exemplo, iniciou-se na década de 1930 e se consolida desde então. Este artigo tem o objetivo de estudar os possíveis impactos na rentabilidade de empresas que ingressaram ou saíram do Índice de Carbono Eficiente (ICO2. Em virtude da escassez de estudos acerca desse índice de responsabilidade social, a presente pesquisa se mostra relevante no avanço do entendimento das vantagens obtidas pelas empresas que adotam medidas carbono eficientes. A fim de analisar tal efeito, foi adotado um modelo adaptado do Capital Asset Pricing Model (CAPM. A amostra da pesquisa compreendeu 12 empresas que entraram ou saíram do índice ao longo do período de 2012 a 2015. Os resultados obtidos não permitiram associar movimentos no ICO2 com aumentos ou quedas nos índices de rentabilidade, à exceção de duas empresas. Sendo assim, não foram verificadas evidências estatísticas de que o ICO2 é um fator relevante para a elevação da rentabilidade empresarial. Esse fato aponta para uma não valorização, por parte do investidor, das empresas apenas por comporem o índice.The environmental and social concern in the human actions is not an unique fact of the XXI century. Brazilian environmental public policy, for example, began in the 1930s and strengthened since. This article aims to study the possible impact on the profitability of companies who entered or left the Carbon Efficient Index (ICO2. Due to the lack of studies about this social responsibility index, this research is important in advancing the understanding of the benefits obtained by the companies that adopt efficient carbon measures. In order to analyze this effect was adopted an adapted model of the Capital Asset Pricing Model (CAPM. The survey sample comprised 12 companies who entered or left the index over the period 2012 to 2015. The results obtained

  19. Design and implementation of the 40, 50/51 protections and MEL, OEL and V/HZ limiters in a synchronous generator; Diseno e implementacion de las protecciones 40,50/51 y limitadores MEL, OEL y V/HZ en un generador sincrono

    Energy Technology Data Exchange (ETDEWEB)

    Goitia Ochoa, Salvador Hector

    2001-10-15

    The thesis shows the design and implementation of loss of field (40) and overcurrent (50/51) relays, minimum excitation limiter (MEL), over excitation limiter (OEL) and Voltage / Frequency limiter (V/Hz). It is also shown the development of a synchronous machine mathematical model for representing the conditions of open circuit, three phase short-circuit at stator terminals and short/open circuit at the field winding. Finally, a study about the magnetic saturation effect on the protection against loss of excitation is shown. It is studied the effects on the relay settings by using the X{sub d} saturated reactance. All the tests were applied for a salient-pole synchronous machine of 7 kVA, 220 V and 1800 rpm. The machine is at the Propulsion Laboratory of the Instituto Tecnologico de La Laguna. [Spanish] En este trabajo de tesis se realiza el diseno e implementacion de las protecciones contra la perdida de campo (40) y de sobrecorriente (50/51), asi como el de los limitadores de minima excitacion (MEL), maxima excitacion (OEL) y el limitador de Voltaje / Frecuencia (V/Hz). Ademas se muestra el desarrollo de las ecuaciones del modelo matematico del generador sincrono en condiciones de circuito abierto, con una falla trifasica en terminales, con el devanado de campo en corto circuito y en circuito abierto. Por ultimo se realiza un estudio en el cual se incluye el efecto de la saturacion magnetica en la proteccion contra la perdida de campo y las consecuencias que traeria el ajustar la proteccion usando el parametro de X{sub d} saturada. Las pruebas fisicas de las protecciones y limitadores fueron aplicadas a un generador sincrono de polos salientes con una capacidad de 7 kVA, 220 V, 1800 rpm, localizado en el Laboratorio de Propulsion de Instituto Tecnologico de la laguna.

  20. Proceedings of the 22 National seminar on the rational an efficient use of energy and exposition of equipment and services. [Selected Papers]; 22. Seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This document contains the proceedings of the 22 national seminar on the rational and efficient use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F., from the 25 to the 29 of August of 2003. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies and the environment. [Spanish] Este documento contiene la memoria tecnica del 22 seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 25 al 29 de agosto de 2003. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables y ambiente.

  1. Sistemas transparentes para gobiernos electrónicos eficientes

    Directory of Open Access Journals (Sweden)

    Andrade Castro, Jesús Alberto

    2007-05-01

    Full Text Available Este trabajo hace una reflexión crítica del papel que desempeñan los sistemas transparentes en el gobiernoelectrónico. La misión de los sistemas transparentes computarizados es desarrollar aplicaciones confiables y robustas,con el propósito de sustituir la fiscalización y los controles jurídicos y contables del comportamiento administrativo,por verdaderas evaluaciones que incluyan la participación del ciudadano, en el ejercicio transparente de la accióngubernamental. Teniendo como base la necesidad de tener aplicaciones para gobierno electrónico, el Laboratorio deInvestigación de Tecnologías y Sistemas de Información (LITSI de la Facultad de Ciencias de la Universidad del Zuliadesarrolla aplicaciones de minería de texto, para obtener datos que están envueltos en el metalenguaje de etiquetas(HTML contenido en las páginas WEB. Con el prototipo que hemos desarrollado, se ha hecho un intento por convertirinformación desde documentos tipos texto no estructurados que están en la WEB, en información factible de ser analizaday contrastada con las acciones y políticas públicas. Se pretende así, desarrollar sistemas transparentes eficientescon aplicaciones computarizadas que permitan al ciudadano ejercer el control social de la gestión gubernamental.

  2. Prueba de grupo. Una eficiente alternativa para estimar prevalencia animal

    Directory of Open Access Journals (Sweden)

    Osval Antonio Montesinos López

    2012-01-01

    Full Text Available La estimación de prevalencia animal o detección de agentes infecciosos, es de vital importancia para una nación o estado para proteger su seguridad alimentaria y garantizar el comercio local y exterior. Sin embargo, realizar estas dos tareas (estimación y detección eficientemente requiere de significativos recursos materiales y humanos. Por ello, el presente artículo presenta una revisión del proceso de estimación y detección usando la técnica estadística conocida como prueba de grupo (group testing que puede contribuir al ahorro de recursos cuantiosos para la estimación y detección de enfermedades infecciosas en ciencia animal cuando la prevalencia es menor o igual al 10%. Group testing es una ingeniosa técnica estadística propuesta por Dorfman (1943. Esta técnica consiste en juntar el material de k individuos, mezclarlos perfectamente y en lugar de realizar una prueba de laboratorio para cada individuo, se realiza una sola prueba con la mezcla de los k individuos. De esta forma se logran ahorros significativos. Por ello, se muestra el funcionamiento de algunos métodos para clasificar individuos; se expone el proceso de estimación puntual y por intervalo de prevalencia animal; y se ilustra el cálculo del tamaño de muestra bajo este modelo, con la finalidad de que los investigadores en ciencia animal la utilicen y ahorren recursos significativos.

  3. ¿Es el cáncer eficiente?

    OpenAIRE

    Esteva de Sagrera, Juan, 1948-

    2016-01-01

    Eficiencia del cáncer desde el punto de vista de que la proliferación de células cancerosas supone la desaparición del sustrato bioológico que permite su desarrollo. La máxima eficiencia del cáncer supone la ineficiencia por la muerte de las células canceosas por destrucción del habitat biológico.

  4. A HIPÓTESE CONJUNTA DO CAPM E MERCADO EFICIENTE

    Directory of Open Access Journals (Sweden)

    César Martins Guimarães

    2006-05-01

    Full Text Available O CAPM é utilizado para testar a eficiência de mercados desde o final dos anos 1960. O objetivo deste trabalho foi testar a hipótese conjunta do CAPM e da eficiência do mercado brasileiro de ações nos cinco anos compreendidos entre abril de 2000 e março de 2005, através da análise do desempenho de fundos mútuos de ações. O Alfa de Jensen foi escolhido como medida de retorno extraordinário dos fundos de ações, por considerar o ajuste do resultado em relação � exposição da carteira ao risco sistemático. Os dados apontaram que não há evidências de ineficiência de mercado para o período analisado, assumindo-se ser o IBX e o Ibovespa índices representativos da carteira de mercado e o CDI de um dia uma taxa representativa do ativo livre de risco.

  5. A HIPÃTESE CONJUNTA DO CAPM E MERCADO EFICIENTE

    Directory of Open Access Journals (Sweden)

    César Martins Guimarães

    2006-05-01

    Full Text Available O CAPM é utilizado para testar a eficiência de mercados desde o final dos anos 1960. O objetivo deste trabalho foi testar a hipótese conjunta do CAPM e da eficiência do mercado brasileiro de ações nos cinco anos compreendidos entre abril de 2000 e março de 2005, através da análise do desempenho de fundos mútuos de ações. O Alfa de Jensen foi escolhido como medida de retorno extraordinário dos fundos de ações, por considerar o ajuste do resultado em relação exposição da carteira ao risco sistemático. Os dados apontaram que não há evidências de ineficiência de mercado para o período analisado, assumindo-se ser o IBX e o Ibovespa índices representativos da carteira de mercado e o CDI de um dia uma taxa representativa do ativo livre de risco.

  6. Diseno e Implementación de un Sistema Automatizado para Control Remoto de Iluminación en Conformidad de la Tecnología INSTEON y Optimización del Sistema de Seguridad CCTV en el Edificio GIMPROMED

    Directory of Open Access Journals (Sweden)

    Ronald Moreno

    2012-11-01

    Full Text Available El presente documento describe la implementación de un sistema automatizado y la optimización del sistema de seguridad CCTV (circuito cerrado de televisión para el edificio GIMPROMED. El sistema estará basado en la tecnología INSTEON y se orientara principalmente al control remoto de iluminación, y del equipo de climatización (aire acondicionado. La monitorización, supervisión y control del sistema se realizará a través de un software propietario desarrollado en lenguaje de programación de alto nivel JAVA, con un diseño personalizado y en base a los requerimientos del usuario. Los dispositivos del sistema automatizado serán seleccionados tomando en cuenta los tipos de cargas a controlar, el espacio físico disponible y la distribución de circuitos eléctricos. La optimización del circuito cerrado de televisión traerá consigo la implementación de un sistema flexible que permite integrar los dispositivos analógicos con las nuevas tecnologías existentes a fin de ofrecer una solución eficiente, robusta y flexible. En suma, este sistema, coadyuvará al desarrollo integral de la empresa, y proporcionara un ambiente productivo y eficiente a través de la automatización con el fin de brindar seguridad y respaldo a las personas que trabajan en ella.

  7. Fuel cells: new technology of natural gas for energetical building; Pilas de combustible: nueva tecnologia de gas natural para edificios energeticamente autoabastecidos

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, A. M.

    2000-07-01

    Fuel Cells have emerged in the last decade as one of the most promising new and sustainable natural gas technologies for meeting the energy needs of all the economy sectors into the 21st century. Fuel Cells are an environmentally clean, quiet, and highly efficient method for generating electricity and heat from natural gas. A fuel cell is an electrochemical device that converts the chemical energy of a fuel directly to usable energy (electricity and heat) without combustion. For this reason, the application and use of the fuel cell technology may be the most important technological advancement of the next century. At the beginning of the 2000 year Sociedad de Gas de Euskadi, s. a. started a demonstration project in favour of the high-temperature planar solid oxide fuel cell (SOFC) for domestic micro-CHP utilization. This type is certainly most exacting from the materials standpoint, and it offers the advantage of uncomplicated fuel pretreatment. (Author)

  8. Analysis of the potencial of natural illumination for the savings and efficient use of the energy in buildings located in hot climates; Analisis del potencial de la iluminacion natural para ahorro y uso eficiente de la energia en las edificaciones en climas calidos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J. R. [Universidad Autonoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Departamento de Medio Ambiente, (Mexico)

    1997-12-31

    Daylight is an essential factor in lightening buildings. Its use is not only oriented to supply illumination to the spaces to provide adequate lightening levels for the optimum execution of their occupants` tasks, but also to supply the appropriate illumination level required in each case for specific functions, as well as to contribute to the psychophysiological health of its users and provide a favorable ambient and the germicide action in the ultraviolet component of the sunlight and besides a portion of vitamin {sup D,} that is needed for people`s health. On the other hand, the rational and efficient use of daylight can contribute to the diminish the consumption of electric power, that is used for the artificial lightning of buildings. This situation is particularly important in hot climates, where the consumption of electricity for lightening interior spaces is huge, mainly in non-dwelling buildings. In this paper the possibilities of the utilization of daylight are explored and analyzed for the purpose of achieving energy savings and the visual thermal and lightning comfort in buildings. [Espanol] La luz natural diurna es un factor indispensable en los edificios. Su uso no solamente esta orientado a proveer de iluminacion a los espacios para proporcionar niveles de iluminancia adecuados para la optima realizacion de las tareas visuales de los ocupantes, sino tambien para proporcionar la calidad luminica que se requiere para cada caso y funcion especificas, asi como contribuir a la salud psicofisiologica de los usuarios al brindarles un ambiente favorable y la accion germicida en la componente ultravioleta luminica y ademas, un contenido de vitamina {sup D,} necesario para la salud de las personas. Por otra parte, el uso sensato y eficiente de la luz natural diurna puede contribuir a reducir el consumo de energia electrica que se utiliza para el alumbrado artificial de los edificios. Esta situacion es de particular importancia en climas calidos, donde los

  9. Estudio de modificaciones geométricas en boquillas de calderas piro y acuotubulares para la combustión eficiente de crudos pesados // Study of geometric modifications in pyro and aquatubular mouthpieces of boilers for the efficient combustion of heavy oil

    Directory of Open Access Journals (Sweden)

    E. Lincheta Mesa

    2000-07-01

    Full Text Available Se presenta un estudio de boquillas de quemadores de calderas piro y acuotubulares. Se analizan diferentes variantes en lasdimensiones, forma y posición de los conductos de atomizador que dan paso al combustible y al fluido auxiliar en el casode quemadores con atomización por vapor.En todos los casos se evalúa el cono de pulverización y la calidad del spray, analizando la influencia de la presión deatomización y de la configuración geométrica en la eficiencia de atomización.Se determina la eficiencia de la combustión con varios tipos de boquillas, demostrándose la efectividad de lasmodificaciones introducidas cuando se queman combustibles de menor calidad.Se concluye que es posible sustituir algunas boquillas de importación y elevar la eficiencia en la combustión de crudospesados y sus mezclas, con un significativo efecto económico y como un paso más en el perfeccionamiento de las CentralesEléctricas del país para el aprovechamiento del crudo nacional.Palabras claves: quemador, atomizador, fuel oil, caldera, generación de vapor, combustibles, combustión._____________________________________________________________________Abstract :It is presented a study of mouthpieces of pyro and aquatubular burners of boilers. Different variants are analyzed indimensions, forms and position of the atomizer conduits that open the way to the fuel and auxiliary fluid in case of burnerswith steam atomization.In all cases, it is evaluated the pulverization cone and the quality of spray, analyzing the influence of atomization pressureand geometric configuration in the atomization efficiency.Estudio de modificaciones geométricas en boquillas de calderas piro y acuotubulares para la combustión eficiente decrudos pesadosThe efficiency of combustion is determined with several types of mouthpieces. The effectiveness of the introducedmodifications in connection with the import mouthpieces is demonstrated when fuels of smaller quality burns.It is

  10. Analysis of the potencial of natural illumination for the savings and efficient use of the energy in buildings located in hot climates; Analisis del potencial de la iluminacion natural para ahorro y uso eficiente de la energia en las edificaciones en climas calidos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Chavez, J R [Universidad Autonoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Departamento de Medio Ambiente, (Mexico)

    1998-12-31

    Daylight is an essential factor in lightening buildings. Its use is not only oriented to supply illumination to the spaces to provide adequate lightening levels for the optimum execution of their occupants` tasks, but also to supply the appropriate illumination level required in each case for specific functions, as well as to contribute to the psychophysiological health of its users and provide a favorable ambient and the germicide action in the ultraviolet component of the sunlight and besides a portion of vitamin {sup D,} that is needed for people`s health. On the other hand, the rational and efficient use of daylight can contribute to the diminish the consumption of electric power, that is used for the artificial lightning of buildings. This situation is particularly important in hot climates, where the consumption of electricity for lightening interior spaces is huge, mainly in non-dwelling buildings. In this paper the possibilities of the utilization of daylight are explored and analyzed for the purpose of achieving energy savings and the visual thermal and lightning comfort in buildings. [Espanol] La luz natural diurna es un factor indispensable en los edificios. Su uso no solamente esta orientado a proveer de iluminacion a los espacios para proporcionar niveles de iluminancia adecuados para la optima realizacion de las tareas visuales de los ocupantes, sino tambien para proporcionar la calidad luminica que se requiere para cada caso y funcion especificas, asi como contribuir a la salud psicofisiologica de los usuarios al brindarles un ambiente favorable y la accion germicida en la componente ultravioleta luminica y ademas, un contenido de vitamina {sup D,} necesario para la salud de las personas. Por otra parte, el uso sensato y eficiente de la luz natural diurna puede contribuir a reducir el consumo de energia electrica que se utiliza para el alumbrado artificial de los edificios. Esta situacion es de particular importancia en climas calidos, donde los

  11. Aplicación de Gestión Total Eficiente de Energía en el Centro Internacional de Salud “La Pradera” ; Application of Total Management Techniques of Energy Efficiency at the International Health Centre "La Pradera”

    Directory of Open Access Journals (Sweden)

    Leyat Fernández Velázquez

    2014-06-01

    Full Text Available En este artículo se presentan los primeros resultados obtenidos de la aplicación de la Metodología de las Técnicas de Gestión Total Eficiente de la Energía en el Centro Internacional de Salud “La Pradera”. Se realizó una caracterización energética del Centro, determinándose la estructura de consumo de los portadores energéticos. Se efectuó una investigación estadística de los datos del Centro durante los años 2010 y 2011, obteniéndose que el portador energético más influyente en el consumo de la instalación es la energía eléctrica. Se analizó la relación entre el índice de consumo kilowatt hora vs habitación-día-ocupada (kWh/HDO para evaluar correctamente la eficiencia energética del centro, determinándose que la temperatura ambiente es un factor significativo en los consumos de electricidad, lo cual conllevó a la obtención de un nuevo índice de consumo que refleja acertadamente el comportamiento del consumo de energía eléctrica en función de los servicios prestados por esta entidad. This article presents the first results of the application of the Methodology for Total Management Techniques of Energy Efficiency at the International Health Centre "La Pradera". It was realized an energetic characterization of the Centre, determining the structure of energy carriers consumption. It was conducted a statistical investigation of the data Centre during the years 2010 and 2011, giving the electricity as the more influential energy consumption of the facility. It was analyzed the relationship between kilowatt hour consumption rate vs day-occupied-room (kWh / HDO to assess correctly the energy efficiency of the Centre concluding that the room temperature is a significant factor in the consumption of electricity, which led to the award of a new index that accurately reflects the consumption behaviour of electric energy consumption based on the services provided by this entity.

  12. Práticas de governança eletrônica e eficiência na utilização das receitas: uma análise nos estados brasileiros Prácticas de gobierno electrónico y el uso eficiente de los ingresos: un análisis en los estados brasileños Electronic governance practices and efficiency in the use of the revenue: an analysis on the Brazilian states

    Directory of Open Access Journals (Sweden)

    Ilse Maria Beuren

    2013-04-01

    Full Text Available A pesquisa objetiva analisar as práticas de governança eletrônica dos estados brasileiros e sua correlação com a eficiência na utilização das receitas. Pesquisa descritiva foi conduzida por meio de análise documental e abordagem quantitativa. A amostra intencional e não probabilística compreendeu os 26 estados brasileiros. O Distrito Federal foi excluído da amostra devido à indisponibilidade de dados para a pesquisa. Na análise dos dados utilizaram-se medidas de estatísticas descritivas, análise de correlação de Pearson e cálculo da eficiência com o software DEA-Solver. Os resultados evidenciam que os estados com melhores práticas de governança eletrônica localizam-se na região Sudeste, seguidos dos da região Sul. O índice médio geral de governança foi de 58%, muito distante de 100%. Em relação à eficiência no uso das receitas, os cálculos pelo DEA mostram que todos os estados das regiões Sul e Sudeste apresentam score1, considerados eficientes em relação aos demais. A região Norte apresentou a menor média (0,94 de eficiência. Pelos cálculos do DEA, 17 estados atingiram score1, indicando que a maioria dos estados brasileiros é eficiente na utilização das receitas. Constatou-se ainda que os estados com melhores práticas de governança eletrônica são os que apresentam maior eficiência na utilização das receitas.La investigación tiene como objetivo analizar las prácticas de gobierno electrónico en los estados brasileños y su correlación con el uso eficiente de los ingresos. La investigación descriptiva se realizó mediante el análisis de documentos y un enfoque cuantitativo. La muestra no probabilística intencional e-compuesto por los 26 estados brasileños. El Distrito Federal fue excluido de la muestra debido a la falta de disponibilidad de datos para la investigación. Al analizar los datos se utilizaron medidas de estadística descriptiva, análisis de correlación de Pearson y la

  13. CONTRIBUCIÓN DE LAS ENTIDADES DE “ECONOMÍA SOCIAL” A LA GESTIÓN EFICIENTE DEL AGUA PARA USO AGRÍCOLA: SITUACIÓN EN LA REGIÓN DE MURCIA/CONTRIBUTION OF THE ENTITIES OF “SOCIAL ECONOMY” TO THE EFFICIENT MANAGEMENT OF WATER FOR AGRICULTURAL USE: SITUATION IN THE REGION OF MURCIA

    Directory of Open Access Journals (Sweden)

    Narciso ARCAS LARIO

    2007-01-01

    Full Text Available AbstractEn la literatura abundan los trabajos dirigidos a caracterizar las entidades que integran la “Economía Social” en España y a cuantificar su contribución a los diferentes sectores económicos y, en especial, al sector agroalimentario. Sin embargo, estos trabajos no se han hecho eco de la importancia de estas organizaciones para la gestión de un recurso tan fundamental para el sector agrario como el agua, y del papel que en ella juegan las Comunidades de Regantes (CCRR, sobre todo, junto a las entidades asociativas agrarias (Cooperativas Agrarias y Sociedades Agrarias de Transformación. Aunque apenas contempladas como entidades de “Economía Social” en los estudios publicados sobre este tipo de organizaciones, a las Comunidades de Regantes (CCRR corresponde la función prioritaria de distribuir y administrar de una manera eficiente las aguas asignadas entre sus miembros. A ello, también pueden contribuir otras organizaciones ampliamente reconocidas dentro de la “Economía Social” como es el caso de las Cooperativas Agrarias y las Sociedades Agrarias de Transformación. En este contexto, el objetivo de este trabajo es, de un lado, poner de relieve que las CCRR comparten los principios de las empresas de “Economía Social”, y resaltar sus características con relación a las Cooperativas Agrarias y SAT. Por otra parte, se identifican los componentes de la eficiencia en la gestión del agua para uso agrícola y se analiza la contribución que las CCRR y las entidades asociativas agrarias de la Región de Murcia realizan a la mejora de la misma a través de los diversos servicios que prestan a sus socios (formación, información, asesoramiento, financiación, etc. /In the literature there are many works directed at characterizing those entities which form the “Social Economy” in Spain and at quantifying their contribution to the different economic sectors, especially the agricultural food sector. However, these works

  14. Influência de Brachiaria brizantha nas características fisiológicas relacionadas a fotossíntese e uso eficiente da água em cana-de-açúcar Influence of Brachiaria brizantha in physiological characteristics related to photosynthesis and efficient use of water in sugarcane

    Directory of Open Access Journals (Sweden)

    L Galon

    2011-01-01

    Full Text Available O aumento da população das plantas daninhas eleva a habilidade competitiva dessas com as plantas cultivadas, podendo causar interferência nos aspectos fisiológicos das culturas. Objetivou-se com o trabalho avaliar a interferência de populações de Brachiaria brizantha nas características relacionadas a atividade fotossintética e o uso eficiente da água das cultivares de cana-de-açúcar RB72454, RB867515 e SP80-1816. Foi conduzido um experimento a campo, onde os tratamentos foram constituídos por 12 populações de plantas de B. brizantha que emergiram juntamente com a cultura. Aos 120 dias após a emergência da cana-de-açúcar foram realizadas as avaliações da concentração de CO2 subestomático (Ci - µmol mol-1, a atividade fotossintética (A - µmol m-2 s-1, a condutância estomática (Gs - mol m-1 s-1, a taxa de transpiração (E, a eficiência do uso da água (EUA e a massa seca da parte aérea (SDM - g por planta da cultura. Todas as variáveis fisiológicas e a massa seca da cultivar RB72454 foram afetadas pelo aumento da densidade das plantas de B. brizantha, bem como a transpiração da cultivar RB867515. A cultivar RB72454 apresenta menor habilidade competitiva com as plantas daninhas e a atividade fotossintética é limitada por fatores que reduzem o influxo de CO2 para o interior da folha.The increase in density of weeds increases also its competitive ability, which affects the physiological aspects of crops. This study aimed to evaluate the interference of increasing densities of Brachiaria brizantha over sugarcane varieties RB72454, RB867515 and SP80-1816 based on physiological variables related to the photosynthesis rate. For this, a field was installed, being treatments composed by 12 densities of the competitor, ranging from 0 to 112 plants m-2, emerged simultaneously to the crop. At 120 days after crop emergence the substomatal CO2 concentration (Ci - µmol mol-1, photosynthetic activity (A - µmol m-2 s-1

  15. Economic, environmental and social impacts of geothermal development, and energy savings and efficient use of power in Baja California, Mexico; Impactos economicos, ambientales y sociales del desarrollo geotermico y del ahorro y uso eficiente de la electricidad en Baja California, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Campbell R, Hector E.; Montero A, Gisela [Universidad Autonoma de Baja California, Instituto de Ingenieria, Mexicali, Baja California (Mexico)]. E-mail: hecr@iing.mxl.uabc.mx; Lambert A., Alejandro A. [Universidad Autonoma de Baja California, Facultad de Ingenieria, Mexicali, Baja California (Mexico)

    2011-01-15

    remain at 2200 tons per year (t/a), emitted mainly from geothermal-electric units. NO{sub x} emissions will increase from 6000 t/a in 2005 to 24,000 t/a in 2025, and CO{sub x} will rise from 3.4 million t/a in 2005 to 12.7 million t/a in 2025. The cost of generation will be affected by changes in the energy matrix, and the use of natural gas will predominate. In absolute values it will increase from $648 million USD in 2005 to $2273 million USD in 2025. The cost will depend on an use up to 70% of natural gas. The proposed goals of the Systemic Planning focused on: a) reduce own uses of electricity during generation, b) reduce electric own uses and electric losses during transmission and distribution, c) reducing the growth of electric consumption in the industrial sector, and d) increasing the share of geothermal energy. In a comparison of the Systemic Planning System with the Prospective, increasing in 500 MW the geothermal installed capacity will increase the investment cost, but the balance of net exports, carbon credits and reduced consumption of natural gas indicates a total savings of $11 billion USD and a decrease of 2.3 million tons of CO{sub x}. The geothermal growth combined with the saving and efficient electrical use was rated the best plan, with a total savings of $13.5 billion USD and a decrease in emissions of 8.5 million tons of CO{sub x}. [Spanish] Se presenta un ensayo de Planeacion Electrica para Baja California, Mexico, que incluye el diagnostico de produccion y consumo electrico 1994-2005, la prospectiva al ano 2025 manteniendo las tendencias historicas, y la planeacion sistemica al incidir en la prospectiva mediante acciones de ahorro y uso eficiente de la electricidad y el incremento de la participacion de la geotermia. El diagnostico indica que en 1998 la capacidad geotermoelectrica representaba el 57%, y para 2004 el 73% estaba basado en gas natural, aumentando la dependencia energetica. La generacion cambio de una relacion de 2 a 1 de vapor

  16. Praxis educativa ecopacifista de enriquecimiento curricular: Conceptuacion, diseno y divulgacion

    Science.gov (United States)

    Osorio, Carlos Agustin Muniz

    A general consensus exists that the present worldwide state of the natural environment is in crisis. Tied to this crisis, the social dimension presents a discouraging picture in aspects like violence and poverty. The predominant neoliberal economic system---ecocidal and genocidal---just as the production system that sustains it, affects this crisis. Puerto Rico, in its political and economic relationship with the United States of America, is not exempt of this situation. Education arises as an alternative to transform this reality. Science education has the potential to address these socio-environmental problems in a creative way. From a scientific educational framework, we conceptualized, designed and disseminated diverse approaches and tools that integrate socio-ecological and environmental aspects, as well as issues related to violence, conflict and peace. The central research questions were: At present, what are some of the main characteristics of the social-ecological and environmental global and local (glocal) issues and what relation do they have with formal education?; What is the ethical responsibility of science education when, facing social-ecological and environmental situations and issues concerning peace?; What educational foundations justify the "Praxis Educativa Ecopacifista de Enriquecimiento Curricular" as an alternative to the situations and issues considered?; What didactic tools do we propose?; What curricular design and revision processes do we propose? What dissemination processes do we propose? The nature of our methodology is qualitative and is centered around curricular design. It includes a research-theoretical dimension, a practical-research dimension, and systematizing of learning elements. We emphasize the conceptualization of the theoretical-philosophical and methodological dimensions of the ecopacifist approach and its fundamental principles. We highlight the praxis, integrating creativity, intelligence and talent development, critical consciousness and nonviolent civil action. We design several curricular and didactic tools, among these: four ecopacifist activity guides, an ecopacifist curricular model, the educational strategy "TiERRa" (Earth in Spanish), reference articles, audio-visual materials, models of educational strategies and examples of curricular implementation. By means of the design and creation of a web page (http://proyectoecopaz.org), we hope to disseminate the knowledge constructed, the contributions and creations, in a rapid and accessible way.

  17. Integral physics data for fast-reactor design; Donnees de physique integrale intervenant dans les etudes de reacteur a neutrons rapides; Integral'nye fizicheskie dannye dlya raschetov reaktorov na bystrykh nejtronakh; Datos fisicos integrales para el diseno de reactores rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Loewenstein, W B; Meneghetti, D [Argonne National Laboratory, Argonne, IL (United States)

    1962-03-15

    examinent ces donnees et decrivent leurs domaines d'application. Ils montrent que dans certaines analyses de spectre et d'etat critique, les resultats experimentaux et analytiques sont limites. Ils font des suggestions sur l'orientation des recherches experimentales et analytiques a venir. Elles combleraient le fosse entre la theorie et l'experience qui existe dans les systemes 'connus'. Ces propositions comprennent egalement des suggestions en vue de 'consolider' la physique de modeles theoriques de grands reacteurs surgenerateurs a neutrons rapides. (author) [Spanish] La preparacion del capitulo dedicado a la fisica de los reactores rapidos, en la segunda edicion de la publicacion 'Reactor Physics Constants' que aparecera en breve, exigio la recopilacion de los datos disponibles sobre experimentos integrales. La eleccion de los datos integrales de fisica de los reactores rapidos que se ha de incluir en esa seccion se baso en los dos criterios siguientes: a) que los datos provengan de sistemas relativamente simples que se presten para un analisis teorico sencillo; y b) que se trate de sistemas complejos que representan prototipos o maquetas que ofrecen interes general para el estudio de los reactores de potencia rapidos. Se fijo el primer criterio con la intencion de registrar los datos integrales de aquellos sistemas que tienen una utilidad mas general en la verificacion de los parametros y los procedimientos de calculo de las secciones eficaces. El segundo criterio se basa en la presentacion de los datos corrientes sobre sistemas reales de reactores de potencia reproductores rapidos. Estos son demasiado complicados para permitir un analisis teorico sencillo. Constituyen una demostracion de la complejidad del reactor real si se compara con la instalacion critica de experimentacio n mas esquematica y mas facil de analizar. Los datos fisicos integrales que intrevienen en el diseno de reactores constituyen el resultado de mediciones efectuadas en conjuntos criticos o

  18. A revisão rápida de 100% é eficiente na detecção de resultados falsos-negativos dos exames citopatológicos cervicais e varia com a adequabilidade da amostra: uma experiência no Brasil The 100% rapid rescreening is efficient in the detection of false-negative results and varies according to the quality of the sample: a Brazilian experience

    Directory of Open Access Journals (Sweden)

    Edna Joana Cláudio Manrique

    2007-08-01

    Full Text Available OBJETIVO: avaliar a eficiência da revisão rápida de 100% para detecção de resultados falsos-negativos dos exames citopatológicos cervicais e verificar se esses resultados variam com a adequabilidade da amostra e com a idade da mulher. MÉTODOS: para avaliar a eficiência da revisão rápida, os 5.530 esfregaços classificados como negativos pelo escrutínio de rotina, após serem submetidos à revisão rápida de 100%, foram comparados com as revisões dos esfregaços com base em critérios clínicos e aleatória de 10%. Para análise estatística, as variáveis foram estudadas de maneira descritiva e, quando houve comparação, foram aplicados o teste do chi2 e o teste Cochran-Armitage. RESULTADOS: dos 141 esfregaços suspeitos pela revisão rápida, 84 (59,6% foram confirmados pelo diagnóstico final; desses, 36 (25,5% foram classificados como células escamosas atípicas de significado indeterminado, cinco (3,5% como células escamosas atípicas, não podendo excluir lesão de alto grau, 34 (24,1% como lesão intra-epitelial escamosa de baixo grau, seis (4,3% como lesão intra-epitelial de alto grau e três (2,1% como células glandulares atípicas. Dos 84 esfregaços suspeitos e confirmados pelo diagnóstico final, 62 (73,8 foram classificados como satisfatórios e 22 (26,2% satisfatórios, porém com alguma limitação, mas não se observou diferença significativa com a idade da mulher. CONCLUSÕES: os resultados deste estudo mostraram que a revisão rápida é uma alternativa eficiente como método de controle interno da qualidade na detecção de resultados falsos-negativos dos exames citopatológicos cervicais. Observou-se, também, que a revisão rápida apresentou melhor desempenho quando a amostra foi classificada como satisfatória para análise, porém não variou com a idade da mulher.PURPOSE: to evaluate the efficiency of the 100% rapid rescreening in the detection of false-negative results and to verify whether the results

  19. El control interno como herramienta eficiente en las Pymes de la ciudad de Portoviejo

    Directory of Open Access Journals (Sweden)

    Jéssica Monserrate Ubillús Macías

    2016-12-01

    Full Text Available El   control interno ha sido institucionalizado dentro las entidades públicas como disposición de las entidades reguladoras, sin embargo esta situación no es la misma dentro del sector privado debido a que no es  obligatorio el control interno en ocasiones no se le da la importancia que requiere y se desestima su utilidad,  es por esta razón que dentro de esta investigación se ha partido de un estudio documental de los antecedentes del control interno como punto inicial, para luego hacer una investigación de campo donde se efectuaron entrevistas y encuestas a empresas del sector privado con la finalidad de conocer  la aplicación que se le da al control interno, y con estos resultados realizar un análisis minucioso para determinar las causas y posibles soluciones de la poca aplicabilidad de estas técnicas en este sector; se puede resaltar el hecho que si bien no es aplicado si es conocido por la mayoría su existencia y por lo tanto se lo lleva a una práctica empírica  que no es técnica.  Palabras clave: Control interno, procedimientos, estructuras organizativas, empresas, resultados.

  20. Importancia de la administración eficiente del capital de trabajo en las Pymes

    Directory of Open Access Journals (Sweden)

    García-Aguilar, Juanita

    2017-08-01

    Full Text Available This paper aims to analyze the importance of an efficient administration of working capital, as a strategy to achieve the operation of SMEs and their permanence in time. Working capital is the minimum cash that every company needs to execute its operating activities normally. Proper management of the asset enables to have the necessary liquidity to cover short-term obligations, as a result of the efficient application of the cash conversion cycle. For this, a methodology of documentary analysis was applied taking as reference secondary research sources, such as books and scientific papers. Based on the above, the theoretical foundations of working capital, their methods of calculation and a review of research on the management of working capital in Latin American SMEs were analyzed. As a result, it was determined that working capital is a financial tool that every manager must pay attention and spend time, because it determines the survival of a company in the early years of its existence. On the other hand, there are some calculation methods to estimate working capital, each has its essential characteristics and its application depends on the activity to which the organization is committed.

  1. Clusters computacionales para la investigación: personalizables, eficientes, amigables y a costo cero

    Directory of Open Access Journals (Sweden)

    Harold Enrique Castro Barrera

    2013-04-01

    Full Text Available Este artículo presenta UnaGrid/UnaCloud: una solución de infraestructura computacional oportunista, que provee recursos computacionales fundamentales (procesamiento, almacenamiento y redes a bajo costo y por demanda, para soportar proyectos académicos y de e-Ciencia. La infraestructura computacional propuesta se provee a través del aprovechamiento oportunista de recursos computacionales ociosos, disponibles en un campus universitario. En este artículo se describen las arquitecturas definidas, las implementaciones desarrolladas y los casos de estudio. Los resultados obtenidos evidencian una alta eficiencia en la generación de resultados, superando las limitaciones de proyectos dependientes de un ágil aprovisionamiento de recursos computacionales, incluyendo iniciativas académicas y científicas.

  2. ESTRATEGIAS Y OPORTUNIDADES PARA LA PRODUCCIÓN EFICIENTE DE PLANTAS MEJORADAS

    Directory of Open Access Journals (Sweden)

    Efrén Coral Quintero

    2006-01-01

    Full Text Available El mejoramiento de plantas para beneficio de la humanidad es tan antiguo como la agricultura misma. A través de los años los productores han cultivado plantas y han aplicado herramientas cada vez más sofisticadas para el mejoramiento de cultivos, lo que ha causado la introducción de variedades nuevas, adaptadas a condiciones especificas de ambientes o de necesidades, como por ejemplo, variedades más fáciles de cosechar o resistentes a enfermedades, prácticas que han sido reforzadas por la tecnología química. Dos técnicas se han empleado para mejorar cultivos: la selección, que causa la variación genética en las plantas y el mejoramiento, que emplea esa variación para la producción de nuevos tipos. Con el presente artículo, se pretende explicar el desarrollo del mejoramiento de plantas y sus implicaciones de tipo social, ambiental y económico, desde sus inicios, cuando el hombre se volvió agricultor, hasta nuestros días cuando enfrentamos una avalancha de conocimientos y tecnologías, gracias al desarrollo de la ingeniería genética.

  3. Herramientas para el uso eficiente del gas : diagramas de eficiencia térmica

    OpenAIRE

    Amell Arrieta, Andrés Adolfo; Gil B., Edison; Maya B., Rubén Darío

    1998-01-01

    En el presente trabajo se presentan los resultados de una investigación realizada con el fin de desarrollar una herramienta fundamental relacionada con el proceso de optimización de la combustión: Los diagramas de eficiencia térmica. En el proceso de combustión se debe garantizar que todo el calor generado se transfiera eficientemente a la carga, por lo cual es necesario controlar las pérdidas de calor que se presentan básicamente por la salida de los gases de combustión a alta temperatura y ...

  4. Alternativas eficientes para procesamiento y comunicaciones en sistemas de tiempo real

    OpenAIRE

    Romero, Fernando; Méndez, Mariano; Encinas, Diego; De Giusti, Armando Eduardo; Tinetti, Fernando Gustavo; Medina, Santiago; Pi Puig, Martín; Paniego, Juan Manuel; Dell'Oso, Matías

    2017-01-01

    El objetivo de esta línea de investigación es el estudio y desarrollo de Sistemas de Tiempo Real (STR), en particular, la planificación de tareas y la comunicación en Sistemas Distribuidos de Tiempo Real (SDTR), experimentando con microcontroladores y simulaciones para la adquisición y control de las variables del sistema.

  5. ¿Han sido los mercados bursátiles eficientes informacionalmente?

    Directory of Open Access Journals (Sweden)

    Juan Benjamín Duarte Duarte

    2014-06-01

    Full Text Available En el presente trabajo se estudia la contrastación de la eficiencia demercados bursátiles en los últimos quince años, para ello se acude a la revisión de artículos de la base de datos ScienceDirect caracterizando los resultados de forma porcentual. Se encuentra que el 60 % de los trabajos rechaza la eficiencia del mercado, el 35 % presenta evidencia de eficiencia, y el 5 % restante verifica una mejora progresiva de la eficiencia debida a reformas económicas, mayor velocidad en el flujo de información y el lanzamiento de nuevos productos financieros.

  6. El presupuesto público en la gestión eficiente de los municipios

    Directory of Open Access Journals (Sweden)

    Carlos Arturo Gómez R.

    2004-12-01

    Full Text Available El presente artículo plantea la necesidad de realizar un cambio en el proceso del presupuesto público colombiano, de manera que permita llevar a la práctica los planes de desarrollo elaborados con la participación ciudadana, pasando de un sistema rígido donde se estimula el gasto a un sistema orientado a resultados que tenga en cuenta los objetivos definidos y el impacto social de cada partida asignada. De esta manera, los municipios colombianos, enmarcados en el proceso de descentralización que se ha venido desarrollando en el país, pueden contar con una herramienta de gestión pública que busque la eficiencia y la eficacia, dinamizando el desarrollo social mediante la optimización de costos y gastos, aumentos en la productividad y el mejoramiento de los procesos.

  7. Ejecución eficiente de secuencias de navegación web

    OpenAIRE

    Losada Pérez, José

    2016-01-01

    [Resumen] Las aplicaciones de automatización web se utilizan ampliamente para diferentes propósitos, tales como integración B2B o pruebas automatizadas de aplicaciones web. En la mayoría de los sistemas, el componente de navegación automático, se desarrolla utilizando las APIs de navegadores convencionales (ej. Internet Explorer o Firefox). Esta aproximación, presenta problemas de rendimiento en tareas de automatización web intensivas, que requieren de respuestas en tiempo real y/o de un a...

  8. LA GESTIÓN POR PROCESOS: UN ENFOQUE DE GESTIÓN EFICIENTE

    OpenAIRE

    Miguel Ángel Mallar

    2010-01-01

    Cada vez más se observan los esfuerzos orientados a adecuar las organizaciones al complejo escenario en que se mueven. Cambios de reglas de juego, incremento de la competencia, apertura al mundo a través de la tecnología, hacen al cliente mucho más exigente, modificando sus demandas y necesidades.La Gestión basada en los Procesos, surge como un enfoque que centra la atención sobre las actividades de la organización, para optimizarlas.En este trabajo se considerará a la organización como una r...

  9. Efficient HVAC. New products; Climatización eficiente. Nuevos productos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-07-01

    Jung is responding to the challenge of energy efficiency, ease of operation and economic profitability in all of its solutions for the tertiary sector, whether for newly constructed buildings or refurbishments, for full management of the electrical system or the partial control of lighting, HVAC, mood settings, access control, etc., for the bedrooms or specific areas of the building. In the specific case of hotels, Jung offers each a custom-made solution in line with its possibilities and objectives. (Author)

  10. ABONANDO ANDO EN COMPETENCIA Un reto eficiente y eficaz que hay que vivenciar y disfrutar.

    Directory of Open Access Journals (Sweden)

    Carmen Cantero E

    2014-05-01

    Full Text Available Con este proyecto se ha logrado transformar los residuos orgánicos que se producen en la institución en Compost, el cual es un producto orgánico rico en nutrientes, que constituyen un excelente abono.  De igual forma, el estudiante toma conciencia de la necesidad de mantener un ambiente limpio, lo cual se proyecta a los hogares por medio de campañas culturales que van comprometiendo a su familia y la comunidad donde habitan, con esto estimula la capacidad para crear, transformar y desarrollar habilidades que generan cambios en el contexto para el mejoramiento personal y colectivo;  además el estudiante comprende que con la transformación de los residuos sólidos se pueden desarrollar estándares curriculares desde las diversas áreas. Se impulsa la cultura del emprendimiento y el desarrollo de competencias básicas, ciudadanas, investigativas y laborales  mediante la estrategia del desarrollo de Proyectos Pedagógicos Productivos (PPP que permiten  mejorar los resultados académicos, dentro del marco del modelo holístico que se maneja en la institución, orientado hacia la solución de problemas mediante el método IDEAL, fundamentado en estándares y competencias.  (Yus  Ramos, 2001. Se asume la metodología problemática, de aprendizaje significativo, autónomo, cooperativo, experiencial y conceptual de la enseñanza; se orienta por las técnicas del trabajo en equipo, investigación en grupo y cooperación guiada que privilegian la construcción del conocimiento, el aprendizaje en equipo y el autoaprendizaje. Además es una herramienta metodológica que permite solucionar los estándares curriculares, tomando como base el proceso de enseñanza aprendizaje para integrar EL SABER, EL HACER Y EL SER.

  11. RECUBRIMIENTOS DE NITRUROS METÁLICOS DEPOSITADOS CON UBM: TECNOLOGÍA EFICIENTE Y AMBIENTALMENTE LIMPIA

    Directory of Open Access Journals (Sweden)

    JHON OLAYA

    2010-01-01

    Full Text Available El objetivo de esta investigación es estudiar la influencia de la configuración del campo magnético sobre los parámetros del plasma y algunas propiedades de recubrimientos de TaN, TiN, NbN, ZrN y CrN producidos con un sistema de sputtering con magnetrón desbalanceado (UBM. Este sistema permite modificar la densidad de corriente iónica y la energía de los iones que llegan al substrato por medio de la variación en la configuración del campo magnético sin modificar otras condiciones del depósito. Las diferentes configuraciones del campo magnético se cuantificaron a través del coeficiente de desbalance, KG, el cual es proporcional a la posición del punto de campo cero del magnetrón. El efecto más importante del aumento del bombardeo iónico al variar la configuración del campo magnético se observó en la microestructura de las películas, particularmente en la orientación preferencial. Usando la configuración KG = 1.3, se observó la orientación preferencial [200] en todos los recubrimientos. Sin embargo, cuando KG = 0.85 la respuesta fue diferente para cada material. Otra consecuencia del aumento del bombardeo iónico fue el aumento de los esfuerzos residuales de compresión que resultó mayor para las películas de TaN, mientras que en las películas de CrN se obtuvo la menor concentración de esfuerzos. Las durezas más altas se observaron en las películas de TaN, NbN y ZrN, la mejor resistencia a la corrosión en las películas de ZrN y la mejor resistencia al desgaste en las películas de NbN.

  12. Uso eficiente del agua para el cultivo de rosa cv. Freedom bajo invernadero

    Directory of Open Access Journals (Sweden)

    John J. Arévalo-H

    2013-08-01

    Full Text Available Determinar el requerimiento de agua y el momento adecuado de distribución, es un factor fundamental para el cultivo de flores. El objetivo del presente trabajo fue determinar el efecto de la aplicación de tres láminas de riego sobre el desarrollo y producción del cultivo de la Rosa cv. Freedom, bajo invernadero. El experimento se realizó con tres láminas de riego en un cultivo de rosa (Rosa spp. cv. Freedom. Se analizó el crecimiento de los tallos florales, la vida en florero, la producción y la eficiencia en el uso del agua. Los tratamientos se basaron en tres niveles de evapotranspiración de cultivo (ETc (70, 80 y 100%. Durante el estudio, el cultivo se mantuvo en producción constante. Se aplicaron 384,87, 254,25 y 218,97 m³ correspondiente a 100, 80 e 70% de ETc respectivamente, significando un ahorro de agua de 14,0 y 21,8% en el 80 e 70% de ETc respectivamente. El coeficiente de cultivo (Kc vario entre 0,58 y 1,65, con una media de 1,13. No se encontraron diferencias en la producción. Las curvas de crecimiento presentaron incremento continuo, con ajuste al modelo logístico. El 70% de ETc presentó la mayor eficiencia en el uso del agua, con 185 tallos m-3. La conservación media de los tallos florales fue de 12 a 15 días. La mayor causa de pérdida fue la deshidratación, que inició en el día 11, comportamiento normal del tallo floral.

  13. ANALIZELE COMPARATIVE – METODE EFICIENTE DE DIAGNOSTICARE ÎN MANAGEMENTUL STRATEGIC

    Directory of Open Access Journals (Sweden)

    Eugen Remes

    2010-09-01

    Full Text Available Strategic diagnosis seeks to identify strategic position of a firm at some point. Strategic diagnosis is a complex process that includes several basic steps through which strategies are developed and implemented within the firm. Any strategic diagnosis process involves performing complex analysis that contributes to highlighting the position of the company lies at the start of a strategic approach. Among various strategic analysis methods, in this paper we refer only to the comparative analyses, with all its specificities. Comparative analysis are based on a number of specific instruments, such as historical analysis, comparative analysis with industry norms, best practice analysis, benchmarking. Of all these methods, benchmarking is the method of comparative analysis the most commonly used in management. By benchmarking firms can observe the own development and evolution, the resources, the skills, the capabilities, the results and the types of strategies applied more or less successfully.

  14. Hacia un modelo dinámico y eficiente de formación del profesorado

    Directory of Open Access Journals (Sweden)

    Luís HERNÁNDEZ ABENZA

    2011-01-01

    Full Text Available El contexto actual de la enseñanza, caracterizado por los importantes cambios e innovaciones realizadas últimamente, demanda del profesorado, como elemento fundamental del cambio educativo, unas pautas de acción y un rol que contribuyan a preparar a las alumnas y alumnos para comprender la sociedad en la que se desenvuelven, así como a desarrollar la capacidad de analizar críticamente su entorno. Para ello es importante procurar, desde la escuela, que acontezca una interacción significativa con su vida, experiencias y entorno cotidiano. En este sentido se desarrollan en esta ponencia varios planteamientos, como ¿para qué se educa a una persona a lo largo de la enseñanza infantil y obligatoria?, ¿cómo enseñar el contenido para que el alumnado lo aprenda significativamente? o ¿qué formación debe de adquirir el profesorado de educación obligatoria para responder a los sobre las experiencias de formación e innovación en educación infantil y obligatoria.

  15. MATERIAIS DE ISOLAMENTO TÉRMICO DE EDIFÍCIOS. PARA ALÉM DA ENERGIA OPERACIONAL.

    Directory of Open Access Journals (Sweden)

    Carlos Oliveira Augusto

    2016-12-01

    Full Text Available A utilização de materiais de isolamento térmico para a obtenção de edifícios energeticamente eficientes visa, na generalidade dos casos, a satisfação das respetivas necessidades de aquecimento e arrefecimento da fase operacional. O objetivo principal deste trabalho é o de - mediante a utilização de metodologia exploratória, nomeadamente revisão bibliográfica - identificar materiais de isolamento mais sustentáveis e, concomitantemente, expor o efeito paradoxal de outros com elevado Potencial de Aquecimento Global (GWP, destacando o papel da Avaliação de Ciclo de Vida (ACV, do Ecodesign e da Declaração Ambiental de Produto (DAP para a conceção, comparação e seleção de materiais. Como principal conclusão, salienta-se a ausência generalizada de informação ambiental por parte dos produtores o que, a par de preços de aquisição que não internalizam Custos de Ciclo de Vida (LCC, tem conduzido à utilização de materiais com elevada pegada de carbono e ao “paradoxo do isolamento”. 

  16. Comparison of the thermal gain of the more commonly roofing systems used in Mexico`s social dwellings; Comparacion de la ganancia termica de los sistemas de techumbre mas comunmente utilizados en la vivienda social en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Alfredo [Division de Estudios de Posgrado de la Facultad de Arquitectura UNAM, Mexico, D. F. (Mexico); Morillon, David [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

    1996-12-31

    Under the frame of discussion of the Mexican Official Standard 008 (Integral Energy Efficiency in non-residential Buildings), and with the purpose of assessing its feasibility and possible extension to residential buildings, this paper, whose objective is to evaluate the roofing systems (opaque) more commonly utilized on the social dwellings in Mexico, is presented. To perform this evaluation the heat gains by conduction through the roofing in different cities were obtained. Later on these heat gains were compared against the energy consumption that would produce its removal in each one of the cases. Finally, thermal resistance values (R) that allow, in significant form diminishing such gains, are presented, producing in consequence, a thermally efficient building. [Espanol] Dentro del marco de discusion de la Norma Oficial Mexicana 008 (Eficiencia energetica integral en edificios no residenciales), y con el fin de evaluar su factibilidad y posible extension hacia las edificaciones residenciales, se presenta este trabajo que tiene como objetivo la evaluacion de los sistemas de techumbre (opacos) mas comunmente utilizados dentro de la vivienda social en Mexico. Para realizar esta evaluacion se obtuvieron las ganancias por conduccion a traves del techo para distintas ciudades. Posteriormente, se compararon dichas ganancias contra el consumo de energia que produciria la remocion de las mismas en cada uno de los casos. Finalmente, se proponen valores de Resistencia Termica (R) que permitan disminuir de manera importante dichas ganancias teniendo, en consecuencia, una edificacion energeticamente eficiente.

  17. Integração de condicionantes de morfologia urbana no desenvolvimento de metodologia para planejamento energético urbano

    Directory of Open Access Journals (Sweden)

    Karin Regina de Casas Castro Marins

    Full Text Available O objetivo desse artigo é apresentar as características gerais de uma nova metodologia para planejamento energético urbano, detalhando os procedimentos para integração de condicionantes de morfologia urbana, que constitui a primeira etapa de aplicação metodológica. Esta abordagem é inovadora e focada na integração de estratégias e soluções em morfologia e mobilidade urbanas, edifícios, energia e meio ambiente para planejamento de áreas em desenvolvimento urbano, novas ou a serem requalificadas, na escala de distritos, bairros e unidades de vizinhança. A análise dos resultados da aplicação metodológica no caso da operação urbana Água Branca indicou que a ocupação urbana por edificações e as densidades construída e populacional necessitavam ser compatibilizadas com a área livre requerida ao adequado dimensionamento da seção viária, no que tange a aspectos de climatologia e de provimento de infraestrutura e demanda para mobilidade urbana. Esta era uma premissa para o aproveitamento da luz e da energia solar em edificações e para que o sistema de transporte urbano fosse mais funcional e energeticamente mais eficiente.

  18. Comparison of the thermal gain of the more commonly roofing systems used in Mexico`s social dwellings; Comparacion de la ganancia termica de los sistemas de techumbre mas comunmente utilizados en la vivienda social en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Alfredo [Division de Estudios de Posgrado de la Facultad de Arquitectura UNAM, Mexico, D. F. (Mexico); Morillon, David [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

    1997-12-31

    Under the frame of discussion of the Mexican Official Standard 008 (Integral Energy Efficiency in non-residential Buildings), and with the purpose of assessing its feasibility and possible extension to residential buildings, this paper, whose objective is to evaluate the roofing systems (opaque) more commonly utilized on the social dwellings in Mexico, is presented. To perform this evaluation the heat gains by conduction through the roofing in different cities were obtained. Later on these heat gains were compared against the energy consumption that would produce its removal in each one of the cases. Finally, thermal resistance values (R) that allow, in significant form diminishing such gains, are presented, producing in consequence, a thermally efficient building. [Espanol] Dentro del marco de discusion de la Norma Oficial Mexicana 008 (Eficiencia energetica integral en edificios no residenciales), y con el fin de evaluar su factibilidad y posible extension hacia las edificaciones residenciales, se presenta este trabajo que tiene como objetivo la evaluacion de los sistemas de techumbre (opacos) mas comunmente utilizados dentro de la vivienda social en Mexico. Para realizar esta evaluacion se obtuvieron las ganancias por conduccion a traves del techo para distintas ciudades. Posteriormente, se compararon dichas ganancias contra el consumo de energia que produciria la remocion de las mismas en cada uno de los casos. Finalmente, se proponen valores de Resistencia Termica (R) que permitan disminuir de manera importante dichas ganancias teniendo, en consecuencia, una edificacion energeticamente eficiente.

  19. Pointing Out Main Factors from Design, Construction and Operating Experience of Existing Nuclear Plants for Assisting in Shaping Future Nuclear Power Programmes; Les principaux criteres degages de l'etude, de la construction et de l'exploitation des centrales nucleaires existantes et leur interet pour l'elaboration des futurs programmes d'energie d'origine nucleaire; Ukazanie osnovnykh faktorov proektirovaniya, stroitel'stva i opyta ehkspluatatsii sushchestvuyutsikh atomnykh ehlektrostantsij, chto dolzhno pomoch' pri sostavlenii budushchikh programm atomnoj ehnergetiki; Principales consideraciones relativas al diseno, construccion y explotacion de centrales nucleares, encaminadas a facilitar la preparacion de programas futuros de energia nucleoelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Dalla Volta, F. [Comitato Nazionale per l' Energia Nucleare, Rome (Italy)

    1963-10-15

    incessamment entrer en service en Italie, aideraient a etablir les plans des installations futures. Il suggere la possibilite de prevoir des maintenant des cycles de combustible pour une plus longue periode. (author) [Spanish] En la memoria se examinan las principales consideraciones de caracter tecnico y eco nomico relativas al diseno, construccion y explotacion de las primeras centrales nucleoelectricas a plena escala, y que mas pueden ayudar a preparar los planes futuros de expansion nuclear, con especial referencia a las condiciones que reinan en Italia. El estado actual de la tecnologia de los reactores y su evolucion continua en la ejecucion de los proyectos hasta ahora realizados, muestra una neta tendencia hacia la reduccion de los costos del ciclo de combustible y de los elementos componentes de las centrales. Contribuye a esta evolucion la tendencia cada vez mas acusada a construir centrales de mayores dimensiones, y el hecho de que las previsiones acerca de las condiciones futuras de la red electrica sugieren la conveniencia de instalar centrales nucleares de mayor capacidad que las centrales clasicas, en razon de la disminucion que experimentaran los gastos de produccion gracias a la puesta en servicio de esas nuevas unidades. En lo que se refiere a la experiencia adquirida en e l diseno, construccion y pruebas de las centrales en funcionamiento, la memoria estudia los principales factores que han de tenerse en cuenta en la preparacion de planes para el futuro, tambien desde e l punto de vista de los programas de construccion y de pruebas. El autor insiste en el problema del confinamiento, en razon de la favorable influencia que sobre la elecion del emplazamiento de las centrales puede ejercer el perfeccionamiento de blindajes muy seguros, que podrian construirse sin aumento sensible del costo, teniendo en cuenta la especial situacion de Italia en lo que se refiere a ciertos aspectos del problema. En cuanto a la experiencia adquirida en la explotacion de centrales

  20. Design an online course of radiological protection; Diseno de un curso en linea de proteccion radiologica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia S, R.; Del Sol F, S.; Rivera M, T.; Sanchez G, D., E-mail: rigarcias@ipn.mx [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria No. 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico)

    2015-10-15

    Currently there is a vast research about the harmful effects of the use of ionizing radiation in medical procedures and in recent years struck by the rapid innovation in imaging equipment, considerably increasing the radiation dose received both patients and professionals in the radiodiagnosis area, service having the greatest demand in our country. The main strategy that has so far is education, that is, to inform all those involved in managing ionizing radiation about the applications and risks associated with them. Generally it requires that all personnel occupationally exposed attesting a course of radiation protection. However, the high demand for this type of medical services and poorly trained staff, makes taking a classroom course for personnel occupationally exposed is complicated. So that in the Instituto Politecnico Nacional (IPN) we are designing a course in radiation protection to be implemented online, through the virtual platform Moodle in a first stage, and a massive open online course as the second stage so that can be carried by anyone interested in the subject, without having to appear in person. This will allows to reach the largest possible number of personnel occupationally exposed to just have a computer with internet access. (Author)

  1. Designing a mini subcritical nuclear reactor; Diseno de un mini reactor nuclear subcritico

    Energy Technology Data Exchange (ETDEWEB)

    Escobedo G, C. R.; Vega C, H. R.; Davila H, V. M., E-mail: rafelaescobedo@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Jardin Juarez 147, Col. Centro, 98000 Zacatecas, Zac. (Mexico)

    2015-10-15

    In this work the design of a mini subcritical nuclear reactor formed by means of light water moderator, uranium as fuel, and isotopic neutron source of {sup 239}PuBe was carried out. The design was done by Monte Carlo methods with the code MCNP5 in which uranium was modeled in an array of concentric holes cylinders of 8.5, 14.5, 20.5, 26.5, 32.5 cm of internal radius and 3 cm of thickness, 36 cm of height. Different models were made from a single fuel cylinder (natural uranium) to five. The neutron source of {sup 239}PuBe was situated in the center of the mini reactor; in each arrangement was used water as moderator. Cross sections libraries Endf/Vi were used and the number of stories was large enough to ensure less uncertainty than 3%. For each case the effective multiplication factor k{sub e}-f{sub f}, the amplification factor and the power was calculated. Outside the mini reactor the ambient dose equivalent H (10) was calculated for different cases. The value of k{sub eff}, the amplification factor and power are directly related to the number of cylinders of uranium as fuel. Although the average energy of the neutrons {sup 239}PuBe is between 4.5 and 5 MeV in the case of the mini reactor for a cylinder, in the neutron spectrum the presence of thermal neutrons does not exist, so that produced fissions are generated with fast neutrons, and in designs of two and three rings the neutron spectra shows the presence of thermal neutrons, however the fissions are being generated with fast neutrons. Finally in the four and five cases the amount of moderator is enough to thermalized the neutrons and thereby produce the fission. The maximum value for k{sub eff} was 0.82; this value is very close to the assembly of Universidad Autonoma de Zacatecas generating a k{sub eff} of 0.86. According to the safety and radiation protection standards for the design of mini reactor of one, two and three cylinders they comply with the established safety, while designs of four and five cylinders not met. (Author)

  2. Design of a didactic unit: the energy; Diseno de una unidad didactica: la energia

    Energy Technology Data Exchange (ETDEWEB)

    Meneses V, J.A.; Caballero S, C. [Facultad de Educacion, Universidad de Burgos (Venezuela)

    2003-07-01

    In order to design didactic units a model is proposed which includes the following items: justify the subject of study, carry out a didactic approach and scientific analysis, specify the main principles, spell out the teaching materials and their sequence, define the teaching process and the activities programme, and finally to agree on the criteria and assessment strategies involved. An example of a lesson about the energy concept is shown. (Author)

  3. Design and fabrication of shielding for gamma spectrometry; Diseno y fabricacion de blindaje para espectrometria gamma

    Energy Technology Data Exchange (ETDEWEB)

    Mariano H, E

    1991-05-15

    To have a system of gamma spectrometry in the Radiological Mobile Unit No. 1 (UMOR-1) was designed and manufactured an armor-plating appropriate to this, to make analysis of radioactive samples in place in the event of a radiological emergency, besides being able to give support to the Management of Radiological Safety, and even to give service of sample analysis of other Institutions. (Author)

  4. Design of a system for neutrons dosimetry; Diseno de un sistema para dosimetria de neutrones

    Energy Technology Data Exchange (ETDEWEB)

    Ceron, P.; Rivera, T. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Legaria No. 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico); Paredes G, L. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Azorin, J. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Sanchez, A. [IPN, Escuela Superior de Fisica y Matematicas, Av. Instituto Politecnico Nacional s/n, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Vega C, H. R., E-mail: victceronr@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2014-08-15

    At the present time diverse systems of detection of neutrons exist, as proportional counters based on BF{sub 3}, He{sub 3} and spectrometers of Bonner spheres. However, the cost and the complexity of the implementation of these systems put them far from the reach for dosimetric purposes. For these reasons a system of neutrons detection composed by a medium paraffin moderator that forms a 4π (spheres) arrangement and of several couples of thermoluminescent dosimeters TLD 600/TLD 700. The response of the system presents a minor repeatability to 5% in several assays when being irradiated with a {sup 239}PuBe source and a deviation of 13.8% in the Tl readings of four different spheres. The calibration factor of the system with regard to the neutrons source which was of 56.2 p Sv/nc also was calculated. These detectors will be used as passive monitors of photoneutrons in a radiotherapy room with lineal accelerator of high energy. (Author)

  5. Diseno y desarrollo de una base de datos bibliograficos (Design and Development of a Bibliographic Database).

    Science.gov (United States)

    Mattenella, L. E.; Velazco, J. W.

    1992-01-01

    This article briefly describes the development of bibliographic retrieval systems in the Instituto de Beneficio di Minerales (IN BE MI) in Salta, Argentina, using the Mini-micro CDS/ISIS software developed by Unesco. (LRW)

  6. Diseno de un Modelo de Franquicia para Comercializar Calzado en PYMES

    OpenAIRE

    Freire Valencia, Elga Verónica

    2015-01-01

    1. Introducción.-- 2. Planteamiento de la Propuesta de Trabajo.-- 3. Marco Teórico.-- 4. Metodología.-- 5. Resultados.-- 6. Conclusiones y Recomendaciones El presente trabajo se enfocó en el diseño de un modelo de Franquicia para comercializar calzado en PYMES; aprovechando el impulso que el estado está proveyendo al sector productivo, se proyectó plasmar una idea innovadora y moderna de ventas frente a la inexistencia de un modelo de franquicia para comercializar calzado en nuestro medio....

  7. AP1000, a nuclear central of advanced design; AP1000, una central nuclear de diseno avanzado

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, N.; Viais J, J. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: nhm@nuclear.inin.mx

    2005-07-01

    The AP1000 is a design of a nuclear reactor of pressurized water (PWR) of 1000 M We with characteristic of safety in a passive way; besides presenting simplifications in the systems of the plant, the construction, the maintenance and the safety, the AP1000 is a design that uses technology endorsed by those but of 30 years of operational experience of the PWR reactors. The program AP1000 of Westinghouse is focused to the implementation of the plant to provide improvements in the economy of the same one and it is a design that is derived directly of the AP600 designs. On September 13, 2004 the US-NRC (for their initials in United States- Nuclear Regulatory Commission) approved the final design of the AP1000, now Westinghouse and the US-NRC are working on the whole in a complete program for the certification. (Author)

  8. Nuevas tecnicas basadas en redes neuronales para el diseno de filtros de microondas multicapa apantallados

    Science.gov (United States)

    Pascual Garcia, Juan

    In this PhD thesis one method of shielded multilayer circuit neural network based analysis has been developed. One of the most successful analysis procedures of these kind of structures is the Integral Equation technique (IE) solved by the Method of Moments (MoM). In order to solve the IE, in the version which uses the media relevant potentials, it is necessary to have a formulation of the Green's functions associated to the mentioned potentials. The main computational burden in the IE resolution lies on the numerical evaluation of the Green's functions. In this work, the circuit analysis has been drastically accelerated thanks to the approximation of the Green's functions by means of neural networks. Once trained, the neural networks substitute the Green's functions in the IE. Two different types of neural networks have been used: the Radial basis function neural networks (RBFNN) and the Chebyshev neural networks. Thanks mainly to two distinct operations the correct approximation of the Green's functions has been possible. On the one hand, a very effective input space division has been developed. On the other hand, the elimination of the singularity makes feasible the approximation of slow variation functions. Two different singularity elimination strategies have been developed. The first one is based on the multiplication by the source-observation points distance (rho). The second one outperforms the first one. It consists of the extraction of two layers of spatial images from the whole summation of images. With regard to the Chebyshev neural networks, the OLS training algorithm has been applied in a novel fashion. This method allows the optimum design in this kind of neural networks. In this way, the performance of these neural networks outperforms greatly the RBFNNs one. In both networks, the time gain reached makes the neural method profitable. The time invested in the input space division and in the neural training is negligible with only few circuit analysis. To show, in a practical way, the ability of the neural based analysis method, two new design procedures have been developed. The first method uses the Genetic Algorithms to optimize an initial filter which does not fulfill the established specifications. A new fitness function, specially well suited to design filters, has been defined in order to assure the correct convergence of the optimization process. This new function measures the fulfillment of the specifications and it also prevents the appearance of the premature convergence problem. The second method is found on the approximation, by means of neural networks, of the relations between the electrical parameters, which defined the circuit response, and the physical dimensions that synthesize the aforementioned parameters. The neural networks trained with these data can be used in the design of many circuits in a given structure. Both methods had been show their ability in the design of practical filters.

  9. Fuel radial design using Path Relinking; Diseno radial de combustible usando Path Relinking

    Energy Technology Data Exchange (ETDEWEB)

    Campos S, Y. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2007-07-01

    The present work shows the obtained results when implementing the combinatory optimization technique well-known as Path Re linking (Re-linkage of Trajectories), to the problem of the radial design of nuclear fuel assemblies, for boiling water reactors (BWR Boiling Water Reactor by its initials in English), this type of reactors is those that are used in the Laguna Verde Nucleo electric Central, Veracruz. As in any other electric power generation plant of that make use of some fuel to produce heat and that it needs each certain time (from 12 to 14 months) to make a supply of the same one, because this it wears away or it burns, in the nucleolectric plants to this activity is denominated fuel reload. In this reload different activities intervene, among those which its highlight the radial and axial designs of fuel assemblies, the patterns of control rods and the multi cycles study, each one of these stages with their own complexity. This work was limited to study in independent form the radial design, without considering the other activities. These phases are basic for the fuel reload design and of reactor operation strategies. (Author)

  10. Diseno y construccion de un espectrometro NIR; Design and construction of a NIR spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Barcala Riveira, J M; Fernandez Marron, J L; Alberdi Primicia, J; Molero Menendez, F; Navarrete Marin, J J; Oller Gonzalez, J C

    2003-07-01

    This document describes the design and construction of a NIR spectrometer based on an acoustic-optic tunable filter. The spectrometer will be used for automatic identification of plastics in domestic waste. The system works between 1200 and 1800 nm. Instrument is controlled by a personal computer. Computer receives and analyses data. A software package has been developed to do these tasks. (Author) 27 refs.

  11. Plasma source by microwaves: design description; Fuente de plasma por microondas: descripcion de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Camps, E; Olea, O; Andrade, R; Anguiano, G

    1992-03-15

    The design of a device for the formation of a plasma with densities of the order of 10{sup 12} cm{sup -} {sup 3} and low temperatures (T{sub e} {approx} 40 eV) is described. For such purpose it was carried out in the device a microwave discharge (f{sub o} = 2.45 GHz) in a resonator of high Q factor, immersed in a static external magnetic field. The device worked in the regime {omega}{sub ce} {<=} {omega}{sub o}/2 ({omega}{sub ce}- cyclotron frequency of the electrons, ({omega}{sub o} = 2 {pi} f{sub o}) where is possible the excitement of non lineal phenomena of waves transformation. (Author)

  12. Climatization, energy and design in rural housing; Climatizacion, energia y diseno en la vivienda rural

    Energy Technology Data Exchange (ETDEWEB)

    Aroztegui, J [Facultad de Arquitectura, Montevideo, (Uruguay)

    1994-07-01

    The Work analyzes the possibilities to influence in the energy inputs of the air conditioning in the rural housing through architectonic project decisions. It presents a methodology to guide the first project decisions and to evaluate the future of the housing behavior.

  13. Honey bee as an effective pollinating agent of pumpkin Abelha melífera como eficiente agente polinizador de moranga

    Directory of Open Access Journals (Sweden)

    Daniel Nicodemo

    2009-08-01

    Full Text Available The production of fruits and seeds of many crops is increased when bees visit their flowers pollinating them. The aim of this research was to study the pollination of pumpkins (Cucurbita maxima Duch. var. Exposição, to determine the diversity of insects visiting its flowers, the time and type of provision obtained and the effect of the visits on fruit set, fruit size and weight, and number of seeds. Apis mellifera L. accounted for 73.4% of the visits made by bees, collecting pollen during 34.5 s per flower and nectar in 43.9 s and 29.3 s from female and male flowers, respectively. Trigona spinipes (Fabr. collected only nectar, during a mean time of 60.5 s per flower, and represented 26.6% of the visits by bees. Diabrotica speciosa (Germ. only fed on the petals of the flower. When no insect visits occurred, there was no production of fruits. In the flowers with free visitation by insects, fruit set was 40%. The higher the number of visits, up to 16, by A. mellifera to female flowers, the greater was the fruit set, fruit size and weight, and number of seeds. In flowers visited by insects from the onset of anthesis until 9 a.m., fruit set was 35%. After 9 a.m., there was no fruit set, demonstrating the important role of A. mellifera as a pollinating agent of pumpkin, since it was the only insect visiting up to 9 a.m.A produção de frutos e sementes de várias culturas é favorecida quando abelhas visitam suas flores, efetuando a polinização. O objetivo deste trabalho foi estudar a polinização em moranga (Cucurbita maxima Duch. var. Exposição, no que se refere à identificação dos insetos que visitam mais freqüentemente suas flores, o tempo e tipo de recurso floral coletado e o resultado das visitas destes insetos na frutificação, tamanho, peso e número de sementes dos frutos. Apis mellifera L. foi responsável por 73.4% das visitas realizadas por abelhas, coletando pólen em 34.5 s e néctar em 43.9 s e 29.3 s, respectivamente para as flores femininas e masculinas. Trigona spinipes (Fabr. coletou apenas néctar, em tempo médio de 60.5 s, representando 26.6% das visitas realizadas por abelhas. Diabrotica speciosa (Germ. somente se alimentou das pétalas da flor. Não houve produção de frutos quando não ocorreu visita de insetos. Nas flores com livre visitação de insetos a frutificação foi de 40%. Quanto maior o número, até 16, de visitas de A. mellifera nas flores femininas, maior a frutificação, tamanho, peso e número de sementes. A frutificação foi de 35% no tratamento em que as flores permaneceram disponíveis à visitação desde o início da antese até às 9h00. A partir deste horário não houve frutificação, evidenciando o importante papel da A. mellifera como agente polinizador da moranga, já que foi o único inseto visitante até às 9h00.

  14. CRITÉRIOS PARA A SELEÇÃO DE LINHAGENS DE SORGO EFICIENTES E RESPONSIVAS AO FÓSFORO

    Directory of Open Access Journals (Sweden)

    FABRICIO RODRIGUES

    2014-01-01

    Full Text Available The optimization of nutritional efficiency is critical to increase productivity and reduce produc- tion costs. However, the identification of lines with greater efficiency and responsiveness to phosphorus is of great importance, with the in intention to join the hybrid, these traits at once and, moreover, the best way to select them. Thus, the objective of this study was to evaluate which characters should be considered in the se- lection of genotypes efficient and responsive to phosphorus in sorghum. The correlations were split into direct and indirect basic variables of efficiency and responsiveness to phosphorus through path analysis. The character that most influenced the efficiency of sorghum lines to phosphorus was harvest index to utilization efficien- cy and dry matter to absorption efficiency and use, under conditions of stress. Under conditions of adequate phosphorus fertilization, the trait with the greatest influence for evaluation of responsiveness was dry grain mass to the apparent recovery efficiency, physiological and agronomic.

  15. Diferencias de género en el reconocimiento de caras emocionales: ¿son los hombres menos eficientes?

    Directory of Open Access Journals (Sweden)

    Ana Ruiz-Ibáñez

    2017-08-01

    Full Text Available RESUMEN Como indican las investigaciones sobre recuerdo de estímulos con valencia emocional, las emociones influyen sobre la memoria. Muchos estudios sobre reconocimiento de caras y expresiones faciales emocionales se han centrado en diferencias entre grupos de edad (jóvenes y mayores o diferencias sexuales (hombres y mujeres. No obstante, este tipo de estudios ha arrojado resultados contradictorios, por lo que sería necesario profundizar en la implicación del género. El objetivo principal de nuestra investigación consiste en analizar las diferencias en el reconocimiento de fotografías de caras con expresiones faciales emocionales entre dos grupos, el primero compuesto por hombres y el segundo por mujeres, formados por estudiantes universitarios entre 18 y 30 años. Los resultados mostraron diferencias estadísticamente significativas en el reconocimiento de caras, presentando las mujeres un mejor reconocimiento corregido (probabilidad de aciertos menos probabilidad de falsas alarmas que los hombres. Sin embargo, otras variables analizadas, como el tiempo o la eficiencia, no ofrecen resultados concluyentes. Además, en el grupo de varones se encontró una correlación negativa significativa entre el tiempo empleado y la eficiencia en la tarea. Estos datos proporcionan apoyo tanto a la hipótesis de la diferencia de género en el reconocimiento de caras, a favor de las mujeres, como a las que proponen un procesamiento cognitivo diferenciado de estímulos faciales en ambos sexos. Finalmente, se argumenta la necesidad de mayor investigación, relacionada con variables como la edad o el nivel social-cultural. ABSTRACT: As research in recollection of stimuli with emotional valence indicates, emotions influence memory. Many studies in face and emotional facial expression recognition have focused on age (young and old people and gender-associated (men and women differences. Nevertheless, this kind of studies has produced contradictory results, because of that, it would be necessary to study gender involvement in depth. The main objective of our research consists of analyzing the differences in image recognition using faces with emotional facial expressions between two groups composed by university students aged 18-30. The first group is constituted by men and the second one by women. The results showed statistically significant differences in face corrected recognition (hit rate - false alarm rate: the women demonstrated a better recognition than the men. However, other analyzed variables as time or efficiency do not provide conclusive results. Furthermore, a significant negative correlation between the time used and the efficiency when doing the task was found in the male group. This information reinforces not only the hypothesis of gender difference in face recognition, in favor of women, but also these ones that suggest a different cognitive processing of facial stimuli in both sexes. Finally, we argue the necessity of a greater research related to variables as age or sociocultural level.

  16. The selection of a refrigerant thermodynamically efficient and economical; Seleccion de un refrigerante que sea termodinamicamente eficiente y economico

    Energy Technology Data Exchange (ETDEWEB)

    Lemus F, Enrique; Ambriz, Juan Jose; Lugo L, Raul [Universidad Autonoma Metropolitana-Iztapalapa, Mexico, D. F. (Mexico)

    1994-12-31

    This paper presents a way of dealing with the problem of selecting a refrigerant that fulfills the operation restrictions such as the refrigeration capacity and cycle temperatures. This selection can be made if the amount of refrigerant handled by the system is known, as well as the relationships supplied by the behavior coefficient (COP) and the inverted cycle efficiency with base on the second law of thermodynamics. [Espanol] Se presenta una forma de como abordar el problema de la seleccion de un refrigerante que cumpla con las restricciones de operacion tales como la capacidad de refrigeracion y temperaturas del ciclo. Esta seleccion puede hacerse si se conoce la cantidad de refrigerante que maneja el sistema, asi como las relaciones que proporcionan el coeficiente de comportamiento (COP) y la eficiencia del ciclo invertido con base en la segunda ley de la termodinamica.

  17. Reference company: efficient dimensioning of the commercial attendance structure; Empresa de referencia: dimensionamento eficiente da estrutura de atendimento comercial

    Energy Technology Data Exchange (ETDEWEB)

    Cancian, Wellington Fazzi [CEMIG Distribuicao, Belo Horizonte, MG (Brazil)], E-mail: wfcancian@cemig.com.br; Uturbey, Wadaed [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Eletrica], E-mail: wadaed@cpdee.ufmg.br

    2009-07-01

    The work intends to help in the establishment of the operational cost of the reference company, model applied to the distributor agents of the electric energy sector. A mathematical model is proposed for the optimum dimensioning of the commercial attendance structure (presential and distance attendance), considering, its applicability in companies of all sizes, and factors prescribed in legal documents.

  18. Desarrollo e implementación de un sistema energéticamente eficiente de iluminación inteligente

    OpenAIRE

    Somoza Colino, Pepe

    2014-01-01

    El sistema creado con este proyecto está basado en el uso de iluminación de estado sólido o SSL, particularmente utilizando como soporte los diodos LED, unido a un equipo electrónico que lo hace inteligente optimizando su funcionamiento ,lo que implica que es capaz de adaptar su capacidad lumínica al entorno en el que trabaja adaptándose de forma automática e instantánea. Como valor añadido dispone de un puerto SMA que le permite actuar como emisor una transmisión de información por VLC (Visi...

  19. Gestão eficiente em sala de aula: seis estudos em ciências sociais aplicadas

    OpenAIRE

    Waldemar Hazoff Junior

    2012-01-01

    Tem aumentado nas Instituições de Ensino Superior (IES) o desalinhamento de expectativas entre coordenadores, educadores e educandos: em face da escassez de recursos, os professores tentam cumprir o programa da disciplina e os estudantes priorizam sua simples aprovação (nota e frequência). Na sala de aula é baixa a utilidade percebida (teoria x aplicação), o que afasta os estudantes e desanima os professores. Na tentativa de gerenciar tais conflitos e atender as exigências curriculares, coord...

  20. Los foros de discusión y sus beneficios en la docencia virtual: recomendaciones para un uso eficiente

    Directory of Open Access Journals (Sweden)

    Isabel Buil

    2012-03-01

    Full Text Available El presente trabajo tiene como principal objetivo efectuar un análisis de los beneficios que los foros de discusión, como espacio de comunicación e intercambio de información, ofrecen en el marco de la docencia virtual. A través de una aplicación empírica en la modalidad de enseñanza virtual en un contexto universitario, la investigación describe la implantación de esta herramienta en varias asignaturas pertenecientes a un grado de empresa, constatando su utilidad y beneficios de cara a mejorar la experiencia de enseñanza-aprendizaje. A continuación, se profundiza en la importancia de los factores que favorecen el empleo de esta herramienta por parte de los estudiantes, poniendo de relieve la influencia de las motivaciones sociales y personales como precursores del empleo de estas herramientas, más allá del impacto de las percepciones extrínsecas. Finalmente, el trabajo discute las implicaciones de estos resultados para las instituciones académicas, ofrece recomendaciones para un mejor uso y comprensión de los foros de discusión, y establece una serie de consejos que permitirán sacar mayor provecho a esta herramienta

  1. HIPÓTESES DE MERCADO EFICIENTE: UM ESTUDO DE EVENTOS A PARTIR DA REDUÇÃO DO IPI

    Directory of Open Access Journals (Sweden)

    Fernanda Sousa Gabriel

    2013-04-01

    Full Text Available A Hipótese de Eficiência do Mercado (HME desenvolvida por Fama (1970, 1991 afirma em sua forma semiforte que os preços ajustam-se instantaneamente a qualquer informação relevante divulgada publicamente, restringindo as oportunidades de obtenção de retornos anormais de maneira contínua. O objetivo deste estudo é verificar qual o comportamento dos preços de ações de companhias que pertencem aos segmentos da linha branca (eletrodomésticos, móveis, papel e celulose, nos dias próximos ao comunicado do governo sobre a redução do Imposto sobre Produtos Industrializados (IPI, ocorrido no dia 26 de março de 2012, visando identificar se o mercado de capitais apresentou a eficiência informacional na forma semiforte. Utilizou-se a metodologia de estudo de evento, a qual avalia retornos anormais dos ativos em relação ao mercado. A coleta de dados deu-se por meio das séries históricas disponibilizadas no site da BM&FBovespa (Bolsa de Valores, Mercadorias e Futuros. A análise do retorno anormal na janela de evento (5 dias antes e após o anúncio sobre a redução do IPI mostrou retornos anormais significativos nos dias t-1 e t-2 a t+3. Os resultados mostraram que o mercado de capitais brasileiro não apresentou comportamento condizente com a HME, especificamente na forma de eficiência semiforte.

  2. RECUBRIMIENTOS DE VC Y NBC PRODUCIDOS POR DRT: TECNOLOGÍA ECONÓMICA, EFICIENTE Y AMBIENTALMENTE LIMPIA

    Directory of Open Access Journals (Sweden)

    Fabio Enrique Castillejo Nieto

    2012-01-01

    Full Text Available En este artículo se presentan los fundamentos del proceso de deposición por difusión termoreactiva (dtrdtrdtr, una técnica que permite producir recubrimientos duros de forma económica sin ser invasiva o agresiva con el medio ambiente. Se propone una metodología experimental para desarrollar recubrimientos de carburos de vanadio (vcvc, y carburos de niobio (NbC, sobre aceros aisi H13, utilizando en el proceso de fabricación DRT, bórax fundido, aluminio y ferroaleaciones a 1.020°C durante cuatro horas. Las muestras obtenidas fueron evaluadas utilizando difracción de rayos X (drdrx, para identificar las fases y microscopía electrónica de barrido (sem, para medir el espesor y la homogeneidad de los recubrimientos producidos. La dureza fue obtenida usando microdureza knoop con una carga de 50 g y la resistencia a la corrosión fue determinada con técnicas electroquímicas, utilizando polarización potenciodímica. Los resultados confirmaron la presencia de recubrimientos de carburo de vanadio y carburo niobio con buena regularidad en el espesor, altas durezas y una mejora en la resistencia a la corrosión en comparación con el acero sin recubrimiento.

  3. La hipótesis de los mercados eficientes, el modelo del juego justo y el recorrido aleatorio

    Directory of Open Access Journals (Sweden)

    Martínez Barbeito, Josefina

    2006-01-01

    Full Text Available El planteamiento de que los precios de mercado reflejan total e instantáneamente la información disponible se conoce como “Hipótesis de los Mercados Eficientes” (EMH. Si esto es verdad, implica que los precios del mercado revelarán siempre los valores justos (fundamentales de los títulos y que, en caso de no ser iguales, entonces la diferencia entre ellos es suficientemente pequeña, de modo que, dados los costes de transacción, esta diferencia puede aprovecharse favorablemente. En síntesis, si se cumple la EMH los mercados de títulos estarán en un equilibrio estocástico continuo. El “modelo del juego justo” no presenta diferencia sistemática entre el rendimiento actual del juego y el rendimiento esperado antes del juego. Se cuestiona el paradigma dominante en la investigación sobre la EMH, debido a diversas anomalías y resultados no consistentes, tratando de encontrar un refinamiento del paradigma existente.

  4. Algoritmo eficiente para cálculo de mapas de visibilidade em terrenos armazenados em memória externa

    OpenAIRE

    Magalhães, Mirella Antunes de

    2009-01-01

    Com a maior disponibilidade de dados detalhados de terrenos, muitas aplicações precisam processar grandes áreas geográficas em alta resolução. O processamento massivo de dados envolvido em tais aplicações criou grandes desafios para os SIGs e necessita de algoritmos otimizados tanto para processamento interno quanto para transferência de dados. Uma dessas aplicações é o cálculo de mapas de visibilidade ou viewshed, que consiste em obter o conjunto de pontos visíveis a partir de um ponto p. Ne...

  5. Estrategias de retencion de empleados eficientes: Importancia estrategica de la fidelizacion de los empleados en organizaciones internacionales.

    Directory of Open Access Journals (Sweden)

    Barragán, J.

    2009-01-01

    Full Text Available In any international organization, mainly those that try to survive in a global labor market plagued of massive dismissals and intense competitiveness, it is consider natural that the same organizations design strategies focus to retention of their best employees in any field of economic activities, without forgetting that those that keep their employees, their employees are constantly looking for better labor atmospheres and demand agreements to improve its wages around of the world.

  6. esMADERA: eficiente y sostenible. Madera Aplicada al Diseño de Estructuras con un Rendimiento Alto

    OpenAIRE

    Cabrero, J. (J.M.)

    2009-01-01

    Entre los materiales estructurales habituales, la madera es el de menor huella ecol ogica. Por ello, su empleo contribuye a la reducci on de emisiones CO2. Pero no s olo, puesto que almacena CO2: una tonelada de madera signi ca aproximadamente una tonelada de CO2 menos en la atm osfera. Es un material natural y renovable. El uso estructural de la madera la revaloriza, pone en valor a los bosques, y consecuentemente facilita su gesti on. La madera ha sido dise~nada por ...

  7. Análisis de sistemas OWC-OFDM para la mejora eficiente de sus prestaciones en VLC

    OpenAIRE

    García García, Paula

    2013-01-01

    Este Trabajo de Fin de Grado presenta un análisis sobre la mejora de prestaciones de los sistemas OFDM (Multiplexación por División de Frecuencias Ortogonales) aplicados a las comunicaciones ópticas inalámbricas. En primer lugar, se expone el problema actual en el campo de las comunicaciones inalámbricas basadas en RF y se justi ca la elección de la tecnología óptica como solución al problema. Más adelante, se revisa el estado del arte de las comunicaciones ópticas inalámbri...

  8. APRENDER A INFORMARSE EN LA RED: ¿SON LOS ESTUDIANTES EFICIENTES BUSCANDO Y SELECCIONANDO INFORMACIÓN?

    Directory of Open Access Journals (Sweden)

    María José Hernández Serrano

    2011-04-01

    Full Text Available Desde una óptica educativa, tomando la Red como recurso de información para la educación, el artículo analiza qué suponen las nuevas habilidades informativas, en lo que respecta a los conceptos de alfabetización y competencia informacional. Esta breve descripción y recapitulación de habilidades nos lleva a preguntarnos, en la práctica, por cómo los estudiantes realizan los procesos de búsqueda y selección de información en línea. Traemos a debate las principales conclusiones abstraídas de los resultados de algunas de las investigaciones más relevantes de las autoras, que dan respuesta a los interrogantes planteados en torno a las habilidades necesarias para acceder y manejar eficazmente la información digital. Finalmente, y puesto que los nuevos modos para localizar y operar con la información precisan reorganizaciones tanto de los modelos tradicionales de enseñanza y aprendizaje, como de los roles y funciones de los diversos agentes educativos, entendemos que la preparación de los alumnos para responder a las distintas demandas informacionales requiere de los docentes un rol de mediador, de facilitador del proceso, exponiendo una propuesta concreta de estrategias de enseñanza de búsqueda y selección de información en la Red.

  9. ¿Han sido el IBEX35 y el IPC definiciones financieramente eficientes del portafolio de mercado?

    Directory of Open Access Journals (Sweden)

    Óscar Valdemar de la Torre Torres

    2013-01-01

    Full Text Available En este trabajo se presenta un estudio inicial que cuestiona la eficiencia financiera de las aproximaciones del portafolio de mercado más empleadas en España y México (IBEX35 e IPC; se observa que podrían no considerarse como tales, con lo que se pone en duda su uso como “referencias neutrales”, según lo proponen Black y Litterman (1992, para la gestión de los mismos. Con el objeto de probar la eficiencia financiera en estos dos índices, se desarrollaron dos simulaciones de eventos discretos empleando el modelo Markowitz-Tobin-Sharpe-Lintner (Markowitz, 1987 con datos de frecuencia mensual -a partir de febrero de 2001 a diciembre de 2010- de sus acciones miembro en una ventana temporal. Los resultados fueron comparados a través del ratio de Sharpe (1966 y demostraron que, en el corto plazo, los supuestos de equilibrio no se mantienen y las aproximaciones del portafolio de mercado estudiadas resultan ineficientes en relación con otros portafolios óptimos derivados de manera simultánea.

  10. Computer system to manage information rigs by 3D electronic models; Sistema computacional para administrar la informacion de plataformas petroleras mediante modelos electronicos 3D

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Bustos, Jesus; Segura Ozuna, Victor Octavio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-06-22

    The evolution and incorporation of new hardware technologies, as well as recent advances in computer systems have enabled the development of applications of computer aided design of most complete scope, such as those used for the design of industrial process plants. This article describes a software system developed to complement the capabilities of one of these systems for the design of process plants. A 3D electronic model is generated through the user interface of the design system that at the same time gives the user the ability to generate, publish, review and control the engineering document that are generated during the entire life cycle of a marine oil platform, a very particular type of industrial process plant. This way, the user obtains not only a tool for the design of an industrial plant, but also a system for managing information and engineering documents that are developed. This allows the user to do a more efficient job by putting at his disposal and in the same system, all documents and information required to perform his duty. [Spanish] La evolucion e incorporacion de nuevas tecnologias de hardware, junto con los avances recientes en sistemas de computo ha permitido el desarrollo de aplicaciones de interesante diseno de computo de mayor alcance, tales como los que se emplean en las plantas de procesos industriales. Este articulo describe un sistema de software desarrollado para complementar las capacidades de uno de estos sistemas para el diseno de proceso. Un modelo electronico se genera por medio de la interfaz de usuario del sistema de diseno, que al mismo tiempo da al usuario la capacidad para crear, publicar, revisar y controlar los documentos de ingenieria que se producen durante el ciclo de vida completo de una plataforma marina petrolera, un tipo muy particular de planta de proceso industrial. De este modo, el usuario no solo obtiene una herramienta para el diseno de una planta industrial, sino tambien un sistema para manejar informacion y

  11. Uma comparação de técnicas de aprendizado de máquina para a previsão de cargas energéticas em edifícios

    Directory of Open Access Journals (Sweden)

    Grasiele Regina Duarte

    Full Text Available Resumo Métodos de aprendizagem de máquina podem ser usados para auxiliar o projeto de edifícios energeticamente eficientes, reduzindo cargas de energia enquanto se mantém a temperatura interna desejada. Eles operam estimando uma resposta a partir de um conjunto de entradas tais como a geometria do edifício, propriedades do material, custos do projeto, condições do tempo no local e impacto ambiental. Esses métodos requerem uma fase de treinamento que considera uma base de dados construída a partir de variáveis selecionadas no domínio do problema. Este trabalho avalia o desempenho de quatro métodos de aprendizado de máquina na predição de cargas de resfriamento e aquecimento de edifícios residenciais. A base de dados do treinamento consiste de oito variáveis de entrada e duas variáveis de saída, todas derivadas de projetos de edifícios. Os métodos foram selecionados de acordo com uma pesquisa exaustiva e ajustados por uma estratégia com validação cruzada. Para a avaliação foram usadas quatro medidas estatísticas de desempenho e um índice de sintetização e resultados. Essa estratégia resultou em algoritmos com parâmetros otimizados e permitiu obter resultados competitivos com os apresentados na literatura.

  12. Analysis of passive systems as a tool for energy saving in buildings: solar control; Analisis de sistemas pasivos como herramienta para el ahorro de energia en edificaciones: Control solar

    Energy Technology Data Exchange (ETDEWEB)

    Saravia, Maricela; Morillon Galvez, David [Instituto de Ingenieria, UNAM, Mexico, D. F. (Mexico)

    1999-07-01

    A bioclimatic study of El Salvador is presented, with the purpose of using window eaves as elements of passive solar control and to determine the optimal angles of orientation, in order to diminish the thermal gains by direct solar radiation and to manage to get close to the comfort conditions. The former with the intention of integrating measures that help to obtain energy efficiency and comfortable buildings, for the conditions of warm humid climate, characteristic of a Central American country like El Salvador. Besides offering a document of consultation among the professionals dedicated to the design and as base of bioclimatic considerations that must have the construction regulations. As a conclusion the optimal angles of eaves for each orientation are presented and a quantitative estimation of the savings that would imply not to consume electrical energy in cooling systems using these elements as a protection to the direct solar radiation. [Spanish] Se presenta un estudio del bioclima de El Salvador, con el fin de utilizar aleros de ventana como elementos de control solar pasivo y determinar los angulos optimos por orientacion, para disminuir las ganancias termicas por radiacion solar directa y lograr acercar a las condiciones de confort. Lo anterior con el objeto de integrar medidas que coadyuven a lograr edificios energeticamente eficientes y confortables, para las condiciones de clima calido humedo, caracteristico de un pais centroamericano como El Salvador. Ademas de brindar un documento de consulta entre los profesionales dedicados al dise y como base de consideraciones bioclimaticas que debe tener el reglamento de construcciones. Como conclusion se presentan los angulos optimos de alero por cada orientacion y una estimacion cuantitativa del ahorro que implicaria el no consumir energia electrica en sistemas de enfriamiento utilizando estos elementos como una proteccion a la radiacion solar directa.

  13. Design of a test-bench to validate a model of a thermal window design; Diseno de un banco de ensayos para la validacion de un modelo de diseno termico de ventanas

    Energy Technology Data Exchange (ETDEWEB)

    Saavedra O, Claudio; Fissore Sch, Adelqui; Mottard, Jean-Michel [Universidad de Concepcion (Chile). Facultad de Ingenieria. Dept. de Ingenieria Mecanica]. E-mail: clsaaved @udec.cl; afissore@udec.cl

    2000-07-01

    Paper presents the design of a test-bench and instrumentation to validate a window thermal mathematical model. The test-bench simulate the thermal performance of a office with a only one wall in directly contact with outdoors, where a single glass window is mounted. To obtain a similar heat transfer relation as the real building, the chamber has been designed and manufactured with an inner and an outer envelope, and with an air spacing maintaining at the same temperature that the test chamber. To change the window size, the test-bench is equipped with a single modifiable outer wall. Instrumentation and methods of measurement for solar radiation, infra red outdoor radiation, indoor and outdoor air temperatures, wind velocity, heat transfer, air ventilating flow and temperature, wall temperatures, etc. are specified. (author)

  14. Axial design of fuel for BWRs using neural networks; Diseno axial de combustible para BWRs usando redes neuronales

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, J.J.; Castillo, A.; Montes, J.L.; Perusquia, R. [ININ, Carretera Mexico-Toluca s/n, 52750 La Marquesa, Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jjortiz@nuclear.inin.mx

    2007-07-01

    In this work a new system of axial optimization of fuel is presented based on a recurrent multi state neural net called RENODC. They are described with detail the main characteristics of this type of neural net (architecture, energy function and actualization of neural states) and like was adapted to the assemble design of nuclear fuel. The fuel design is proven by means of a fuel recharge and pre determined control rod patterns. By this way a good axial fuel design one has, when the thermal limits are fulfilled along the cycle, the reactor stays critic and at least the wanted longitude of the cycle is reached; also the margin of in cold turned off is verified. The assemble of fuel created with RENODC it is substituted by a recharge assemble and it is sought to verify that the energy requirements and aspects of safety are completed. The used cycle corresponds to a balance cycle of 18 months that it can be applied to the Laguna Verde Nucleo electric Central. The tests demonstrate the effectiveness of the system to reach satisfactory results in times of CPU of around 4 hours. This way, it could be proven that the design proposed with a lightly superior enrichment to that of the substituted design, fulfills the energy requirements. In later stages of this project this system will be coupled to the other optimization modules that are already had. (Author)

  15. Wind refrigeration : design and results of an experimental facility; Refrigeracion eolica: Diseno y resultados de una instalacion experimental

    Energy Technology Data Exchange (ETDEWEB)

    Beltran, R. G.; Talero, A.

    2004-07-01

    This article describes the experimental setup used to obtain design parameters for a wind driven refrigeration equipment. The system compressor is directly coupled to the wind mill and will provide refrigeration to a community located in La Guajira in northern Colombia. The testing on the experimental installation assessed the refrigeration capacity that could be provided by an open type commercial compressor coupled to the wind mill axis. Power and torque requirements have been evaluated for different wind mill rotational speeds. An assessment of the local conditions relating to wind speed, frequency and preferred direction for the installation site has been made based on measurements by the Meteorological National Institute and independent data from other sources. (Author)

  16. External management system, occupational dose: Design and Implementation; Sistema de gestion externa dosis ocupacional: diseno e implementacion

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro da silva, C.; Mauricio, C. L. P.; Silva, H. L. R.; Souza-Santos, D.; Bittencourt, R. v.

    2013-07-01

    The results obtained with the use of the system has made it possible to better assess the worker with respect to radiation safety received according to their professional activity. This assessment allows to improve supervision in institutions and the use of teams of Security. (Author)

  17. Experimental Setup to Characterize Bentonite Hydration Processes; Diseno experimental para la caracterizacion de los procesos de hidratacion de la bentonita

    Energy Technology Data Exchange (ETDEWEB)

    Bru, A.; Casero, D.; Pastor, J.M.

    2001-07-01

    We present an experimental setup to follow-up the hydration process of a bentonite. Clay samples, of 2 cm x 12 cm x 12 cm, were made and introduced in a Hele-Shaw cell with two PMM windows and two steel frames. In hydration experiments, a fluid enters by an orifice in the frame, located both at the top and the bottom of the cell, to perform hydration in both senses. To get a uniform hydration we place a diffuser near the orifice. Volume influxes in hydration cells are registered in time. The evolution of the developed interface was recorded on a videotape. The video cameras was fixed to a holder so that the vertical direction in the monitor was the same as the direction of the larger extension of the cell. (Author) 6 refs.

  18. Probabilistic method for geotechnical design. Application to cohesive soils; Metodo probabilista de diseno geotecnico. Aplicacion en Suelos Cohesivos

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Rodriguez, A. J.; Quevedo Sotolongo, G.

    2012-07-01

    A methodology to carry out a process of stochastic modelling in the calculation of the bearing capacity of a strip footing, on a purely cohesive soil, is proposed. the mentioned modelling is based on the application of Monte Carlo Simulation, which is more efficient, in terms of results, than classic procedures using deterministic models. These results will be the base for the application of a probabilistic design method, specifically the safety theory, starting by a statistical characterization of every random variables the impact in the problem, and it defines as a final result, a safety level for the structure, whose value will be the nearest to required safety in first limit state design or stability limit state, which is equivalent to 0.98. By this way it is established the design point of the structure according to safety design condition. (Author) 9 refs.

  19. The design of the Bulgaria rad waste repository; Diseno del centro de almacenamiento de residuos radiactivos de Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    Stefonova, I.; Petrov, I.; Navarro, M.; Sanchez, M.; Medinilla, G.

    2012-11-01

    In October 2011 a consortium composed by Westinghouse Engineering Spain SAU, ENRESA and DBE Technology GmbH was awarded a contract for the design of the Bulgaria rad waste repository. The facility, inspired in the spanish centre of El Cabril owned by ENRESA, will consist of a 66 reinforced concrete cells surface repository capable of receiving 18600 already conditioned waste containers of 20 t each, during 60 years, and the related auxiliary facilities and buildings. The project, representing a challenge because of the schedule and required level of detail, goes on fulfilling main milestones and getting customer satisfaction. (Author)

  20. Design of micro-reactors and solar photocatalytic prototypes; Diseno de micro-reactores y prototipos fotocataliticos solares

    Energy Technology Data Exchange (ETDEWEB)

    Flores E, R.M.; Hernandez H, M.; Perusquia del Cueto, M.R.; Bonifacio M, J.; Jimenez B, J.; Ortiz O, H.B.; Castaneda J, G.; Lugo H, M. [ININ, Km. 36.5 Carr. Mexico-Toluca, 52750 La Marquesa, Ocoyoacac (Mexico)]. e-mail: rmfe@nuclear.inin.mx

    2007-07-01

    In the ININ is carried out research in heterogeneous photocatalysis using artificial light for to degrade organic compounds. In this context, it is sought to use the solar radiation as energy source to knock down costs. Of equal form it requires to link the basic and applied research. For it, a methodology that allows to design and to build micro-reactors and plants pilot has been developed, like previous step, to request external supports and to a future commercialization. The beginning of these works gave place to the partial construction of a prototype of photocatalytic reactor of the cylinder-parabolic composed type (CPC)

  1. Design of a preamplifier for an alpha particles spectrometer; Diseno de un preamplificador para un espectrometro de particulas alfa

    Energy Technology Data Exchange (ETDEWEB)

    Murillo O, R.; Hernandez D, V. M.; Chacon R, A.; Vega C, H. R., E-mail: fermineutron@yahoo.co [Universidad Autonoma de Zacatecas, Unidades Academicas de Estudios Nucleares e Ingenieria Electrica, Calle Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2010-09-15

    To detect radiation diverse detector types are used, when these are alpha particles proportional type detectors are used, semiconductor, of scintillation or traces. In this work the design results, the construction and the first tests of a spectrometer (preamplifier) are presented for alpha particles that was designed starting from a Pin type photodiode. The system was designed and simulated with a program for electronic circuits. With the results of the simulation phase was constructed the electronics that is coupled to a spectroscopic amplifier and a multichannel analyzer. The total of the system is evaluated analyzing its performance before a triple source of alphas and that they are produced by two smoke detectors of domestic use. Of the tests phase we find that the system allows to obtain in a multichannel, the pulses height spectrum, with which we calibrate the system. (Author)

  2. Design and operation of the emergency support center, CAE; Diseno y explotacion del centro de apoyo en emergencias, CAE

    Energy Technology Data Exchange (ETDEWEB)

    Caro, R. J.; Lopez Trillo, E.

    2016-08-01

    The enhancements developed in Spain in the area of Emergency Management, as consequence of the accident at the Fukushima Dai-Ichi NPP in 2011, included the definition of new emergency response centers; Alternative Center for Emergency Management (CAGE) on each NPP and the Emergency Support Center (CAE), shared by all NPPs. This article summarizes the main features and operation activities undertaken since the establishment of the new CAE, centralized, external to the NPPs shared by all Spanish plants and managed by Tecnatom. (Author)

  3. Fuel cell design using a new heuristic method; Diseno de celdas de combustible mediante un nuevo metodo heuristico

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia, R.; Montes T, J. L.; Ortiz S, J. J.; Castillo M, A., E-mail: joseluis.montes@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    In this paper a new method for the pre-design of a typical fuel cell with a structural array of 10 x 10 fuel elements for a BWR is presented. The method is based on principles of maximum dispersion and minimum peaks of local power within the array of fuel elements. The pre-design of the fuel cells is made by simulation in two dimensions (2-D) through the cells physics code CASMO-4. For this purpose of pre-design the search process is guided by an objective function which is a combination of the main neutronic parameters of the fuel cell. The results show that the method is a promising tool that could be used for the design of fuel cells for use in a nuclear plant BWR. (Author)

  4. Preliminary design of a Binary Breeder Reactor; Diseno preliminar de un reactor esferico de quema/cria

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, E. Y.; Francois, J. L.; Lopez S, R. C., E-mail: eliasgarcerv@hotmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    A binary breeder reactor (BBR) is a reactor that by means of the transmutation and fission process can operates through the depleted uranium burning with a small quantity of fissile material. The advantages of a BBR with relation to other nuclear reactor types are numerous, taking into account their capacity to operate for a long time without requiring fuel reload or re-arrangement. In this work four different simulations are shown carried out with the MCNPX code with libraries Jeff-3.1 to 1200 K. The objective of this study is to compare two different models of BBR: a spherical reactor and a cylindrical one, using two fuel cycles for each one of them (U-Pu and Th-U) and different reflectors for the two different geometries. For all the models a super-criticality state was obtained at least 10.9 years without carrying out some fuel re-arrangement or reload. The plutonium-239 production was achieved in the models where natural uranium was used in the breeding area, while the production of uranium-233 was observed in the cases where thorium was used in the fertile area. Finally, a behavior of stationary wave reactor was observed inside the models of spherical reactor when contemplating the power uniform increment in the breeding area, while inside the cylindrical models was observed the behavior of a traveling wave reactor when registering the displacement of the burnt wave along the cylindrical model. (Author)

  5. Design of nuclear cells with re linking of trajectories; Diseno de celdas nucleares con re-encadenamiento de trayectorias

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, A.; Campos S, Y.; Ortiz S, J.J.; Montes, J.L.; Perrusquia, R.; Hernandez, J.L.; Torres, M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2006-07-01

    ently work the results obtained with the Ohtli-RT system obtained when implementing the combinatory optimization technique well-known as Trajectories re linking or Path Re linking in English. The problem to solve is the radial design of nuclear fuel, taking like base nuclear fuel assembles for boiling water reactors (BWR Boiling Water Reactor by its initials in English). To evaluate the objective function used in the system the code in two dimensions Heliums 1.5 was used, which calculates the cross sections of the proposed design. The parameters that were considered for the evaluation of the objective function are the Power peak factor of the bar that generates bigger power in the cell and the Infinite Multiplication Factor. To prove the system its were used assembles 10x10 with 2 water channels. The obtained radial designs of nuclear fuel fulfilled the restrictions imposed to the considered limits, with regard to the involved parameters. (Author)

  6. Design of a generator of harmonic vibrations for rotary unbalance; Diseno de un generador de vibraciones armonicas por desbalance rotatorio

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Vazquez, Ely Edmundo [Grupo de Investigacion Aplicada, Queretaro, Queretaro (Mexico); Silva Navarro, Gerardo [Cinvestav, IPN, Mexico, D.F. (Mexico); Zuniga Osorio, Helen Janeth [CIATEQ, Queretaro, Queretaro (Mexico)

    2007-11-15

    In this paper is presented the experimental development of an integral system for the monitoring and acquisition of involved physical variables in the performance analysis of the turbo-machinery. The integral system has been denominated SMD Turbo (System of Monitoring and Diagnosis for turbo-machinery) and has as fundamental intention to realize the analysis and diagnosis (on the basis of mathematical and graphical tools) of the performance of a machine through the physical measurement of physical variables such as pressure, temperature and vibration. The system is able to realize the analysis of the information in real time and to store it for its later processing of diagnosis by means of specialized software with which the calculations of the performance will be able to be realized. Preliminary results of the proposal are presented that confirm the viability of the proposal. [Spanish] En este trabajo se presenta el desarrollo experimental de un sistema integral para el monitoreo y adquisicion de variables fisicas involucradas en el analisis del rendimiento de la turbomaquinaria. El sistema integral se ha denominado SMD Turbo (Sistema de Monitoreo y Diagnostico para trubomaquinaria) y tiene como proposito fundamental realizar el analisis y diagnostico (en base a herramientas matematicas y graficas) del rendimiento de la turbo maquina a traves de la medicion de variable fisicas como por ejemplo, presion, temperatura y vibracion. El sistema es capaz de realizar el analisis de la informacion en tiempo real y almacenarla para su posterior proceso de diagnostico mediante un software especializado con el cual se podran realizar los calculos del rendimiento. Se presentan resultados preliminares de la propuesta que confirman la viabilidad de la propuesta.

  7. Rate on the rebound of films, strategic design and results; Tasa de rechazo de peliculas, diseno de estrategias y resultados

    Energy Technology Data Exchange (ETDEWEB)

    Guibelalde, E.; Fernandez, J.M.; Ramirez, R.; Canevaro, R.; Vano, E. [Catedra de Fisica Medica. Departamento de Radiologia. Universidad Complutense. Madrid (Spain)

    1998-12-31

    The present work pretends to identify the diagnostic tests of greatest rate on the rebound and to analyze their causes comparing them with the reference values obtained in the University Hospital `San Carlos` study in 1993. Equally is looking for contributing with criterions and strategies for the implantation of a responsible system of information caption. The control of the rate on rebound of radiographic plates is fundamental for the quality control programs feedback. The results emitted by this study confirm the utility to the advantage of this type of global indicators for the quality control programs and contribute reducing collective doses, since the improvement of medical diagnostic and diminishing the operation costs of the inputs utilized. It is emphasized the importance what had to introduce at the personnel which participate in the system to obtain fitted results. (Author)

  8. TTTT; Innovaciones en el diseno de desaladoras de agua de mar por osmosis inversa con tomas abiertas

    Energy Technology Data Exchange (ETDEWEB)

    Farinas, M.

    2002-07-01

    In the present work, the parameters that measure the risk of soiling of the inverse osmosis are comapred, resulting from two designs, one conventional or classic and another one more innovating, concluding that the new one displays manifold advantages as opposed to the classic one for the harnessing of this type. (Author)

  9. System to solve three designs of the fuel management; Sistema para resolver tres disenos de la administracion de combustible

    Energy Technology Data Exchange (ETDEWEB)

    Castillo M, J. A.; Ortiz S, J. J.; Montes T, J. L.; Perusquia del C, R. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Marinez R, R., E-mail: alejandro.castillo@inin.gob.mx [Universidad Autonoma de Campeche, Av. Agustin Melgar s/n, Col. Buenavista, 24039 San Francisco de Campeche, Campeche (Mexico)

    2015-09-15

    In this paper preliminary results are presented, obtained with the development of a computer system that resolves three stages of the nuclear fuel management, which are: the axial and radial designs of fuel, as well as the design of nuclear fuel reloads. The novelty of the system is that the solution is obtained solving the 3 mentioned stages, in coupled form. For this, heuristic techniques are used for each stage, in each one of these has a function objective that is applied to particular problems, but in all cases the obtained partial results are used as input data for the next stage. The heuristic techniques that were used to solve the coupled problem are: tabu search, neural networks and a hybrid between the scatter search and path re linking. The system applies an iterative process from the design of a fuel cell to the reload design, since are preliminary results the reload is designed using the operation strategy Haling type. In each one of the stages nuclear parameters inherent to the design are monitored. The results so far show the advantage of solving the problem in a coupled manner, even when a large amount of computer resources is used. (Author)

  10. Detection of charged particles through a photodiode: design and analysis; Deteccion de particulas cargadas mediante un fotodiodo: diseno y analisis

    Energy Technology Data Exchange (ETDEWEB)

    Angoli, A.; Quirino, L.L.; Hernandez, V.M.; Lopez del R, H.; Mireles, F.; Davila, J.I.; Rios, C.; Pinedo, J.L. [UAEN, UAZ, 98000 Zacatecas (Mexico)]. e-mail: toono4@hotmail.com

    2006-07-01

    This project develops and construct an charge particle detector mean a pin photodiode array, design and analysis using a silicon pin Fotodiodo that generally is used to detect visible light, its good efficiency, size compact and reduced cost specifically allows to its use in the radiation monitoring and alpha particle detection. Here, so much, appears the design of the system of detection like its characterization for alpha particles where one is reported as alpha energy resolution and detection efficiency. The equipment used in the development of work consists of alpha particle a triple source composed of Am-241, Pu-239 and Cm-244 with 5,55 KBq as total activity, Maestro 32 software made by ORTEC, a multi-channel card Triumph from ORTEC and one low activity electroplated uranium sample. (Author)

  11. Design of device for testing in the gamma irradiator; Diseno de dispositivo para pruebas en el irradiador gamma

    Energy Technology Data Exchange (ETDEWEB)

    Mariano H, E

    1991-02-15

    In eves of the recharge of the Gamma Irradiator, JS-6500 it was detected, that there was contamination in the container that housed the pencils of Co-60, coming from Argentina, country to which the ININ buys it recharges. It was determined that the contamination in the container was it interns and after discussing several solution options it was determined to manufacture a device to make a washing of the pencils. It was touch to the Management of Radiological Safety to determine the conceptual design of the device to make the washing and the way of operation of the same one. The Management of Prototypes and Models was responsibility of the mechanical design and its production. (Author)

  12. Plant design alternatives for gas treatment with amines; Alternativas de diseno de plantas de tratamiento de gas con aminas

    Energy Technology Data Exchange (ETDEWEB)

    Maioli, Gerardo; Guruchaga, Gustavo; Raventos, Martin [Tecna S.A., Buenos Aires (Argentina)

    2004-07-01

    In the last three years Tecna S.A. has developed a project to install six gas processing plants with amines, whose goal is the removal of carbon dioxide and hydrogen sulfide from natural gas. During the design of the facility several options for control problems solution were presented. The objective is to provide a description of the most important solution implemented in different situations. Comparative analyses of the six plants, that will be useful in time to carry out similarities with other plants or to address future applications, were included. The main conclusion of this work is that the incorporation of technologies and an appropriate selection of control systems improve the operation of the plants, minimizing maintenance and provide better levels of performance in these types of facilities.

  13. Design, construction and testing of a radon experimental chamber; Diseno, construccion y pruebas de una camara experimental de radon

    Energy Technology Data Exchange (ETDEWEB)

    Chavez B, A; Balcazar G, M

    1991-10-15

    To carry out studies on the radon behavior under controlled and stable conditions it was designed and constructed a system that consists of two parts: a container of mineral rich in Uranium and an experimentation chamber with radon united one to the other one by a step valve. The container of uranium mineral approximately contains 800 gr of uranium with a law of 0.28%; the radon gas emanated by the mineral is contained tightly by the container. When the valve opens up the radon gas it spreads to the radon experimental chamber; this contains 3 accesses that allow to install different types of detectors. The versatility of the system is exemplified with two experiments: 1. With the radon experimental chamber and an associated spectroscopic system, the radon and two of its decay products are identified. 2. The design of the system allows to couple the mineral container to other experimental geometries to demonstrate this fact it was coupled and proved a new automatic exchanger system of passive detectors of radon. The results of the new automatic exchanger system when it leave to flow the radon freely among the container and the automatic exchanger through a plastic membrane of 15 m. are shown. (Author)

  14. Transfer Stations for urban solid wastes. Design; Transferencia ferroviaria de residuos solidos domiciliarios. Alternativas para el diseno

    Energy Technology Data Exchange (ETDEWEB)

    Dussuel Jurado, E.

    2004-07-01

    On the basis of experience in the design of projects promoted by Spanish companies for Transfer Stations for Solid Domestic Waste (RSD) using the railway, aspects regarding location, technological alternatives, restrictions and dimensions are considered. The equipment necessary for the different options is described. The paper is concerned with the Metropolitan Area of Santiago (Chile) and comments on and discusses the regulatory restrictions laid down by the PRMS (Metropolitan Regulatory Plan for Santiago) affecting decisions on location, dimensions and design. Last of all, the costs of Transfer Stations are analysed depending on the distance from the sanitary landfill nd in comparison with the alternative by road, laying down convenience kerbs. Also analysed are the environmental advantages of the railway option as opposed to roads. (Author)

  15. Conceptos de diseño para manufactura (DFM de piezas microfundidas

    Directory of Open Access Journals (Sweden)

    Carlos Julio Cortés Rodríguez

    2005-09-01

    Full Text Available Una de las metodologIas utilizadas por la ingenierIa concurrente o diseno integrado de productos es el diseno para manufactura, DEM. Esta técnica, que está orientada a melorar la fabricación de piezas analizando geometrIas, valores y tolerancias, es utilizada en las primeras etapas de diseno para disminuir los costos de los elementos a fabricar. Se estudió el diseno para manufactura estableciendo reglas de diseno a fin de elaborar una metodologIa para diseno en microfundición.

  16. Optimum geometry for boiler soot blowers nozzles; Geometria optima de toberas para deshollinadores de caldera

    Energy Technology Data Exchange (ETDEWEB)

    Espinoza Garza, Jesus; Garcia Tinoco, Guillermo J; Martinez Flores, Jose Oscar [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    For boiler soot blowing converging-diverging nozzles are employed, whose function is to convert thermal energy of a gas into kinetic energy to remove the deposits that adhere to the heat exchanger surfaces. In this paper are described the experimental equipment and the methods for flow, dynamic pressure, discharge velocity and air expansion factor calculation in each nozzle, as a function of its design geometry, utilizing air from a five stage centrifugal compressor. The graphic analysis of the results, concludes that the most efficient nozzles are not the ones than develop the greatest velocity, but the ones of highest dynamic pressure at the outlet. The nozzle geometry that allows obtaining the maximum dynamic air pressure at the discharge is A{sub 2}/A{sub g}=1.3676 [Espanol] Para el deshollinado de calderas se utilizan las toberas convergentes-divergentes, cuya funcion es convertir la energia termica de un gas en energia cinetica para remover los depositos que se adhieren a las superficies de intercambio de calor. En este trabajo se describen el equipo experimental y los metodos de calculo para flujo, presion dinamica, velocidad a la descarga y factor de expansion del aire en cada tobera, como funcion de su geometria de diseno. Durante la experimentacion se evaluaron siete disenos diferentes de toberas, empleando aire de un compresor centrifugo de cinco etapas. Del analisis grafico de los resultados, se concluye que las toberas mas eficientes no son las que desarrollan mayor velocidad sino las de mayor presion dinamica de la salida. La geometria de tobera que permite obtener la maxima presion dinamica del aire a la descarga es A{sub 2}/A{sub g} = 1.3676.

  17. Optimum geometry for boiler soot blowers nozzles; Geometria optima de toberas para deshollinadores de caldera

    Energy Technology Data Exchange (ETDEWEB)

    Espinoza Garza, Jesus; Garcia Tinoco, Guillermo J.; Martinez Flores, Jose Oscar [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    For boiler soot blowing converging-diverging nozzles are employed, whose function is to convert thermal energy of a gas into kinetic energy to remove the deposits that adhere to the heat exchanger surfaces. In this paper are described the experimental equipment and the methods for flow, dynamic pressure, discharge velocity and air expansion factor calculation in each nozzle, as a function of its design geometry, utilizing air from a five stage centrifugal compressor. The graphic analysis of the results, concludes that the most efficient nozzles are not the ones than develop the greatest velocity, but the ones of highest dynamic pressure at the outlet. The nozzle geometry that allows obtaining the maximum dynamic air pressure at the discharge is A{sub 2}/A{sub g}=1.3676 [Espanol] Para el deshollinado de calderas se utilizan las toberas convergentes-divergentes, cuya funcion es convertir la energia termica de un gas en energia cinetica para remover los depositos que se adhieren a las superficies de intercambio de calor. En este trabajo se describen el equipo experimental y los metodos de calculo para flujo, presion dinamica, velocidad a la descarga y factor de expansion del aire en cada tobera, como funcion de su geometria de diseno. Durante la experimentacion se evaluaron siete disenos diferentes de toberas, empleando aire de un compresor centrifugo de cinco etapas. Del analisis grafico de los resultados, se concluye que las toberas mas eficientes no son las que desarrollan mayor velocidad sino las de mayor presion dinamica de la salida. La geometria de tobera que permite obtener la maxima presion dinamica del aire a la descarga es A{sub 2}/A{sub g} = 1.3676.

  18. Integração de métodos para o uso eficiente de água em ambientes urbanos

    OpenAIRE

    Silva, Marcos Dornelas Freitas Machado e

    2014-01-01

    Os problemas relacionados à escassez hídrica estão em evidência e a busca por tecnologias para redução do consumo de água e por fontes alternativas de abastecimento é incentivada. Varias ações têm sido exploradas como a melhoria do monitoramento do consumo, identificação de vazamentos, instalação de equipamentos economizadores e uso de fontes alternativas, como água cinza e água pluvial. Esta última é o foco de vários estudos, devido aos inúmeros serviços sociais, ambientais e econômicos que ...

  19. Filtración ribereña: una tecnología eficiente y económica para el tratamiento de agua potable.

    OpenAIRE

    Jaramillo Uribe, Marcela

    2012-01-01

    La tecnología de filtración ribereña (FRB) consiste en extraer agua de corrientes superficiales mediante el bombeo de pozos ubicados en el acuífero aluvial adyacente al río. En el trayecto se presentan procesos físicos, químicos y biológicos que mejoran la calidad del agua superficial, sustituyendo o reduciendo los tratamientos convencionales de agua para consumo humano. A pesar de su extensivo uso en Europa y su reciente utilización en Estados Unidos, no existe ninguna publicación científica...

  20. Software efical para la gestión eficiente de motores en la industria; Software Efical for Efficient Management of Motors in the Industry

    Directory of Open Access Journals (Sweden)

    Elías V de la Rosa Masdueño

    2011-02-01

    Full Text Available En este trabajo se explica el diseño, e implementación de una herramienta capaz de controlar y gestionareficientemente los motores eléctricos de una industria. Para ello se elaboró un software de fácil manejoque resolviera el problema y que además brindara otras opciones a los usuarios que hicieran uso delmismo. EFICAL®, controla el inventario de los motores y sus equipos accionados, sus parámetrosnominales, mantenimientos y ensayos, permite calcular la eficiencia por distintos métodos y brinda ademásdatos de catálogos de diversos fabricantes.  This work explains the developing and application of a software tool for efficient management of electricmotors in the industry. For this it was develop friendly software that solve the problem and more over givesanother option to users. EFICAL®, controls the motor inventory and the equipment that they drive, theirnominal parameters, maintenance, and testing; also allow the efficiency calculations by various methodsand gives the catalog data of some manufacturers.

  1. How efficient are pension fund managers in Chile? Quão eficientes são os administradores de fundos de pensão no Chile?

    Directory of Open Access Journals (Sweden)

    Armando Barrientos

    2005-08-01

    Full Text Available The paper measures and evaluates technical efficiency among pension fund managers in Chile. Recent pension reform has established pension fund management market in nine countries in Latin America. The new pension providers compete for affiliates on the basis of fees, rates of return, and quality of service, and are subject to extensive regulation. Applying data envelopment analysis to data from Chile 1982-1999, the paper examines issues of efficiency, competition, and regulation. The analysis concludes that pension fund managers operate below the estimated "efficiency frontier", and there is no evidence of a sustained upward trend in technical efficiency over time.Este artigo se propõe a avaliar e medir a eficiência técnica dos administradores de fundos de previdência privada no Chile. A recente reforma sofrida pela previdência deu lugar a um mercado de gestão de fundos de aposentadoria em nove países da América Latina. Esses novos gestores de fundos de pensão competem por investidores através do custo de suas tarifas, dos índices de rendimento oferecidos e da qualidade do serviço prestado, estando sujeitos a uma regulamentação rigorosa. Aplicando a análise por envoltória de dados (DEA aos dados obtidos para o Chile entre 1982 e 1999, examinamos aqui as questões de eficiência, competitividade e regulamentação. Nossa análise conclui que os administradores de fundos de previdência privada operam abaixo do nível de eficiência desejado, e não há previsão de que venha a ocorrer nenhuma melhora consistente na eficiência técnica desses fundos num futuro próximo.

  2. The obligation of efficient planning of Agencia Nacional de Petroleo, Gas Natural e Biocombustiveis (ANP): what are legal limits?; O dever de planejamento eficiente da ANP: limites juridicos?

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Fabiano Andre de Souza; Leite, Fabio Augusto de C.C. Montanha; Queiroz, Lizziane Souza [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Costa, Hirdan Katarina de M.; Santos, Edmilson Moutinho dos; Vieira, Jose Paulo [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Programa Interunidades de Pos-Graduacao em Energia

    2008-07-01

    After the institutional changes have happened in oil sector since the last decade, Brazil has opened his market and many oil firms are investing in this industry. A government agency was cried, called of Petroleum, Gas and Biofuels National Agency. This agency must realize some activities, such as the attempt of the government plan. Thus, the paper has two goals. First, it will intend to discuss about the mean of efficiency in law and economic areas. Second, it will intend to discuss about the efficiency in the oil Brazilian sector and his plan of action. The bibliography research and the argumentative methods are used. The results showed that it is necessary to describe forms of the measure decisions and actions of the government program that it is realized for this agency, because there are asymmetric information and economic power in this sector. (author)

  3. Patio 2.12: Vivienda prefabricada, sostenible, autosuficiente y energéticamente eficiente. Participación en la competición Solar Decathlon Europe 2012

    Directory of Open Access Journals (Sweden)

    Terrados-Cepeda, F. J.

    2015-06-01

    Full Text Available The prototype “Patio 2.12” was Andalucía Team’s proposal for the 2012 Solar Decathlon Competition (SDE 2012, that was held in Madrid during September 2012, where it was awarded several prizes like the first one in Energy Efficiency. The team comprised a group of teachers and students from four Andalusian Universities. It worked for two years in the design and construction of a housing prototype that could be an example of several concepts at the same time: energy efficiency, architectural integration of solar systems, intermediate scale of prefabrication and a today´s interpretation of traditional Mediterranean way of living and building. Patio 2.12 was intended to be a compendium of energy, sustainability and passive conditioning devices.El prototipo Patio 2.12 fue la propuesta del equipo Andalucía Team para la competición Solar Decathlon Europe 2012 (SDE 2012, celebrada en Madrid en septiembre de 2012, en la que recibió hasta 9 premios, entre los que figura el de Eficiencia Energética. El equipo, integrado por profesores y alumnos de cuatro universidades andaluzas, trabajó durante dos años en el diseño y construcción de un prototipo de vivienda basada en la eficiencia energética, en la integración arquitectónica de los sistemas solares, en la prefabricación de escala intermedia y en una reinterpretación de la forma de vivir y construir de la tradición mediterránea. Patio 2.12 pretende ser un compendio de energía, sostenibilidad y mecanismos de acondicionamiento pasivo.

  4. A colaboração premiada como meio eficiente de investigação das organizações criminosas

    OpenAIRE

    Melo, Anelyse Reis de

    2013-01-01

    Resumo: O presente trabalho tem como escopo a análise do instituto da colaboração premiada como instrumento de política criminal do Estado em face do crime organizado. Para tanto, procede-se ao exame deste fenômeno criminoso à luz do conceito que lhe foi recém atribuído pela Lei n. 12.850/2013, de dois de agosto, bem como das características peculiares identificadas pela doutrina acerca desta espécie de associação ilícita, destacando-se a estrutura complexa e as regras existentes entre ...

  5. The using of more efficient transformers in the industry and commerce; Uso de transformadores mais eficientes na industria e no comercio

    Energy Technology Data Exchange (ETDEWEB)

    Irrek, Wolfgang [Wuppertal Institute for Climate, Environment and Energy (Germany); Targosz, Roman [Polish Cooper Promotion Centre (Poland); Topalis, Frangiskos V. [National Technical University of Athens (Greece)

    2010-06-15

    This paper presents an analysis of the technical-economical potential of the energy efficiency of the distribution transformers at the industry and commerce, including strategies, politics and measures at the corporative level. (author)

  6. Configuraciones eficientes de cables en puentes atirantados según análisis de sensibilidad de su comportamiento aeroelástico

    OpenAIRE

    Jurado, José Ángel; Mosquera, Alejandro; Hernández, Santiago; Nieto, Félix

    2006-01-01

    En el presente artículo se estudian diversas configuraciones de cables para puentes atirantados de gran vano en función de su comportamiento frente al fenómeno de flameo. Como criterio para elegir la configuración de mayor eficiencia se han realizado varios análisis de sensibilidad de los parámetros aeroelásticos estudiando, cómo cambia la velocidad crítica de viento, con la que se produce la inestabilidad por flameo, así como la frecuencia de oscilación, cuando se modifican las p...

  7. Professional Nuclear Materials Management; Gestion Industrielle des Matieres Nucleaires; Obrashchenie s yadernymi materialami na professional'nom urovne; Administracion Eficiente de Materiales Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Forcella, A. A.; O' Leary, W. J. [Allis-Chalmers Manufacturing Company, Bethesda, MD (United States)

    1966-02-15

    This paper describes the scope of nuclear materials management for a typical power reactor in the United States of America. Since this power reactor is financed by private capital, one of the principal obligations of the reactor operator is to ensure that the investment is protected and will furnish an adequate financial return. Because of the high intrinsic value of nuclear materials, appropriate security and accountability must be continually exercised to minimize losses beyond security and accountability for the nuclear materials. Intelligent forethought and planning must be employed to ensure that additional capital is not lost as avoidable additional costs or loss of revenue in a number of areas. The nuclear materials manager must therefore provide in advance against the following contingencies and maintain constant control or liaison against deviations from planning during (a) pre-reactor acquisition of fuel and fuel elements, (b) in-reactor utilization of the fuel elements, and (c) post-reactor recovery of fuel values. During pre-reactor planning and operations, it is important that the fuel element be designed for economy in manufacture, handling, shipping, and replaceability. The time schedule for manufacturing operations must minimize losses of revenue from unproductive dead storage of high cost materials. For in-reactor operations, the maximum achievable burn-up of the fissionable material must be obtained by means of appropriate fuel rearrangement schemes. Concurrently the unproductive down-time of the reactor for fuel rearrangement, inspections, and the like must be minimized. In the post-reactor period, when the fuel has reached a predetermined depletion of fissionable material, the nuclear materials manager must provide for the most economical reprocessing and recovery of fissionable values and by-products. Nuclear materials management is consequently an essential factor in achieving competitive fuel cycle and unit energy costs with power reactors. (author) [French] Le memoire expose en quoi consiste la gestion des matieres nucleaires dans une centrale nucleaire type, aux Etats-Unis. Comme le reacteur en question est partiellement finance a l'aide de capitaux prives, l'une des principales obligations de l'exploitant est d'assurer la protection et la rentabilite des investissements. Etant donne que les matieres nucleaires sont d'une valeur intrinseque elevee, il faut constamment proceder a des controles appropries allant au-dela des mesures de securite et de la comptabilite interessant les matieresnucleaires proprement dites afin de reduire les pertes au minimum. Il faut faire preuve de clairvoyance et planifier judicieusement pour prevenir toute perte supplementaire de capital provenant de frais inutiles ou d'un manque a gagner dans divers secteurs de l'exploitation. C'est ainsi que le gestionnaire de matieres nucleaires doit prendre des dispositions pour garantir la bonne marche des operations et assurer le respect des plans d'execution par une liaison et un controle constants, dans les domaines suivants? a) acquisition du combustible et des elements combustibles, b) utilisation des elements combustibles dans le reacteur et c) recuperation, dans le combustible irradie, des produits et matieres presentant de l'interet. Pendant la periode qui precede l'utilisation du reacteur, il faut faire une place importante dans la planification et les travaux preparatoires aux considerations d'economie dans la conception des elements combustibles, en ce qui concerne leur fabrication, leur manutention, leur transport et leur remplacement. Les differentes etapes de la fabrication doivent etre planifiees de facon a reduire au minimum le manque a gagner du a des periodes improductives d'entreposage de matieres tres couteuses. Pendant la marche du reacteur, il faut assurer une combustion maximale de la matiere fissile par des redistributions appropriees du combustible dans le coeur du reacteur. Parallelement, les temps morts dus a ces redistributions, aux inspections et autres causes semblables doivent etre reduits au minimum. Enfin, lorsque le combustible est extrait du coeur apres avoir atteint un niveau d'irradiation predetermine, le gestionnaire des matieres nucleaires doit veiller a ce que le traitement chimique du combustible et la recuperation des matieres fissiles et des sous-produits se fassent dans les conditions les plus economiques. On voit ainsi que la gestion des matieres nucleaires joue un role essentiel dans l'economie des cycles de combustible et dans la production d'energie par les reacteurs a des prix de revient unitaires concurrentiels. (author) [Spanish] En esta memoria se describen las modalidades de la administracion de los materiales nucleares destinados a un reactor de potencia tfpico de los Estados Unidos. Este reactor esta financiado con capital privado y, por tanto, una de las principales obligaciones de la direccion de la central es asegurar que las inversiones esten protegidas y produzcan un interes razonable. Como los materiales nucleares tienen un valor intrinseco elevado es preciso ejercer sobre ellos una fiscalizacion constante a fin de evitar que las perdidas rebasen los limites de seguridad. Es preciso prevenir mediante una planificacion inteligente las perdidas evitables de capital debidas al incremento de los costos o a la reduccion del rendimiento en determinadas etapas de las operaciones. El administrador de materiales nucleares debe por consiguiente tomar de antemano las disposiciones necesarias para hacer frente a todas las eventualidades y mantener un control constante para evitar que se produzca alguna desviacion de los planes durante a) la adquisicion del combustible o de los elementos combustibles, b) el empleo de los elementos combustibles en el reactor y c) la regeneracion del combustible una vez utilizado. Por lo que respecta al primer punto, es muy importante que los elementos combustibles hayan sido disenados de forma que su fabricacion, su manipulacion y su transporte resulten economicos y sea facil sustituirlos. La programacion de las operaciones de fabricacion debera reducir al mfnimo las perdidas de ingresos debidas a un almacenamiento improductivo excesivamente largo de materiales de costo elevado. Para la etapa de su empleo en el reactor, sera necesario un programa adecuado de redistribucion de los elementos combustibles a fin de lograr el grado maximo de combustion del material fisionable. Ademas, habra que reducir en la medida de lo posible los paros improductivos del reactor debidos a la redistribucion del combustible, a las inspecciones, etc. Cuando el combustible haya llegado a un grado predeterminado de agotamiento, el administrador tendra que disponer la forma mas economica de regeneracion de los materiales fisionables y de recuperacion de los subproductos. La administracion de materiales nucleares es por consiguiente un factor esencial para la reduccion de los costos del ciclo del combustible y para lograr que el costo unitario de la energia producida resulte economicamente interesante. (author) [Russian] Daets ja opisanie ob{sup e}ma rabot na tipichnom jenergetichesko m reaktore v SShA. Poskol'ku jetot reaktor finansiruetsja chastnym kapitalom, odna iz osnovnyh objazannostej operatora sostoit v obespechenii sohrannosti kapitalovlozhenij i poluchenii opredelennoj pribyli. Vvidu bol'shoj sebestoimosti jadernyh materialov neobhodimo postojanno obespechivat' nadlezhashhuju bezopasnost' i uchet s cel'ju svedenija k minimumu poter', ne svjazannyh s obespe- cheniem bezopasnosti i ucheta jadernyh materialov. Neobhodimo vse tshhatel'no produmyvat' i planirovat' zaranee, chtoby izbegat' nenuzhnyh zatrat i rashodovanija kapitala ili snizhe- nija razmerov pribyli v rjade oblastej. Pojetomu administrator, vedajushhij jadernymi materialami, dolzhen zaranee uchityvat' vse nepredvidennye obstojatel'stva i osushhestvljat' postojannyj kontrol' nad otklonenijami ot standartov pri planirovanii vo vremja a) priobretenija topliva i toplivnyh jelementov do ih ispol'zovanija v reaktore, b) pri ispol'zovanii topliv- nyh jelementovv reaktore, i v) pri regeneracii topliva posle ispol'zovanija v reaktore. Vo vremja planirovanija i osushhestvlenija operacij s toplivom do e g o ispol'zovanija v reaktore vazhno, chtoby predusmatrivalas' jekonomija toplivnyh jelementov pri izgotovlenii, obrabotke, transportirovke, a takzhe predusmatrivalas' ih zamenimost'. Grafik provedenija proizvodstvennyh operacij dolzhen obespechivat' svedenie k minimumu poter' pribyli v rezul'tate neproduktivnogo ''mertvogo'' hranenija dorogostojashhih materialov. Pri provedenii operacij vnutri reaktora neobhodimo dobivat'sja maksimal'no vozmozh- noj stepeni vygoranija rasshhepljajushhegosja materiala putem osushhestvlenija sootvetstvujushhih shem peregruppirovki toplivnyh jelementov. Odnovremenno neobhodimo vsjacheski umen'shat' vremja, neproduktivno zatrachivaemoe na peregruppirovku toplivnyh jelementov na ostanovlennom reaktore, na inspekcii i t.d. Vo vremja operacij s jadernymi materialami posle ih ispol'zovanija v reaktore, kogda stepen' obogashhenija topliva dostigla urovnja predvaritel'no ustanovlennogo obednenija rasshhepljajushhegosja materiala, administrator v oblasti jadernyh materialov dolzhen obespechit' naibolee jekonomichnuju pererabotku i regeneraciju rasshhepljajushhihsja materialov i pobochnyh produktov. Obrashhenie s jadernymi materialami sootvetstvenno predstavljaet soboj vazhnyj faktor v dele osushhestvlenija konkurentosposobnogo toplivnogo cikla i podderzhanija sootvetstvujushhe- go urovnja rashodov na edinicu jenergii na jenergeticheskih reaktorah. (author)

  8. El Perfeccionamiento de la gestión ambiental desde el análisis de riesgo para la toma eficiente de decisiones

    OpenAIRE

    Alejandro Merayo Rodríguez; Oscar Santiago Barzaga Sablón

    2010-01-01

    Se aborda la gestión ambiental y su articulación con la gestión de riesgo y la vulnerabilidad, como herramientas para la toma efectiva de decisiones, en la que se realizó un análisis de la evolución relacionada con la percepción de los problemas ambientales y su relación con la gestión ambiental, teniendo como punto de partida los diferentes paradigmas económicos que fueron marcando los distintos momentos de su desarrollo hasta la actualidad. Se presenta como resultado del estudio, una reform...

  9. Use of efficient technologies in the lighting system for new constructions in hotels; Utilizacion de tecnologias eficientes en el sistema de iluminacion para nuevas construcciones en hoteles

    Energy Technology Data Exchange (ETDEWEB)

    Duran Ramirez, Ricardo [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)

    2005-01-15

    The Fideicomiso para el Ahorro de la Energia Electrica (FIDE) jointly worked with two hotels in construction modifying the original projects of the lighting system to obtain a suitable selection of lamps and lighting control subsystems that would render a saving of 67.5% and 71.0% with respect to the lighting systems originally considered. The project also financed the investment with recovery periods between 1.6 and 2.6 years. It is presented the equivalence between the characteristics of the different types of feasible lamps. [Spanish] El Fideicomiso para el Ahorro de la Energia Electrica (FIDE) trabajo conjuntamente con dos hoteles en construccion modificando los proyectos originales del sistema de iluminacion para lograr una adecuada seleccion de lamparas y subsistemas de control de iluminacion que redituaron en un ahorro del 67.5 y 71.0 % respecto a los sistemas de iluminacion originalmente considerados, al tiempo que financio la inversion con periodos de recuperacion entre 1.6 y 2.6 anos. Se expone una equivalencia entre las caracteristicas de los distintos tipos de lamparas factibles.

  10. Un modelo eficiente para la financiación pública de la universidad: el caso español

    Directory of Open Access Journals (Sweden)

    Leonor Mora Agudo

    2007-01-01

    Full Text Available El presente trabajo realiza una aproximación al uso de los recursos públicos destinados a la fi nanciación de las Instituciones de Educación Superior desde la perspectiva de la efi ciencia fi nanciera. Describe una propuesta de modelo para la determinación de las aportaciones públicas a percibir por las Universidades públicas españolas diferenciando dos tramos de fi nanciación: el destinado a cubrir los gastos por la actividad docente y, aquel que permitirá satisfacer los gastos por la actividad investigadora. Esta propuesta se fundamenta en el resultado de una investigación realizada desde la Fundación de la Universidad Rey Juan Carlos para el Consejo de Coordinación Universitaria del Ministerio de Educación y Ciencia español. El modelo propuesto se basa en la selección, defi nición, cuantifi cación y valoración de un conjunto de variables que, a nuestro juicio, permiten captar y valorar la circulación interna de valores que se dan en la actividad universitaria.

  11. Métodos Numéricos tipo Runge-Kutta-Nyström para la integración eficiente de problemas oscilatorios

    OpenAIRE

    García Garrosa, Amelia

    2001-01-01

    En la segunda mitad del siglo pasado se han realizado numerosos trabajos sobre métodos numéricos para la integración de ecuaciones diferenciales ordinarias. En la actualidad, numerosos paquetes de software contienen rutinas de propósito general para la resolución de sistemas de ecuaciones diferenciales de primer orden. Dado que una ecuación diferencial de cualquier orden puede ser escrita como un sistema de ecuaciones de primer orden, dichas rutinas pueden utilizarse para resolver ecuaciones ...

  12. Fachada dupla ventilada em edifícios altos de escritórios em São Paulo: uma solução ambientalmente eficiente?

    Directory of Open Access Journals (Sweden)

    Mônica Pereira Marcondes

    2007-06-01

    Full Text Available This paper presents the key findings of a master's dissertation developed as part of the Environment and Energy Studies Programme of the Architectural Association Graduate School - AA, London, in 2003/2004. The study investigates the applicability of double-skin façades on high-rise office buildings in the city of São Paulo, Brazil. As part of the investigation, the origins and characteristics of the systems are studied, identifying suggested reasons for the use of such façades in high-rise offices. Conceptual models were created to qualitatively compare and evaluate the performance of different double-skin typologies. A comparative analysis was undertaken taking the climatic conditions of São Paulo into account. The application of double-skin façades was investigated with dynamic thermal simulation, using TAS (EDSL 2003 to assess thermal performance, and using ECOTECT (Square One 2004 and RADIANCE for daylighting studies. The results provide an overview of environmental considerations underlying the design and possible application of double-skin façades in São Paulo.

  13. Auto-administración de tratamiento antibiótico domiciliario endovenoso (A-TADE) en la endocarditis infecciosa : un modelo asistencial seguro y eficiente

    OpenAIRE

    Pajarón Guerrero, Marcos

    2016-01-01

    La endocarditis infecciosa (EI) es un proceso infeccioso de elevada gravedad, que habitualmente se maneja en el hospital. Las unidades de hospitalización a domicilio (HaD) ofrecen en su cartera de servicios el tratamiento antibiótico domiciliario endovenoso (TADE) para procesos infecciosos de diversa complejidad, siendo la EI uno de los que más reticencias ha suscitado hasta el momento. Dentro del modelo TADE, disponemos de una variante denominada auto-administración de tratamiento antimicrob...

  14. Seleção e caracterização de estirpes de Bacillus thuringiensis eficientes contra a Diatraea saccharalis (Lepidoptera: Crambidae

    Directory of Open Access Journals (Sweden)

    Cristina Lima de Macedo

    2012-12-01

    Full Text Available O objetivo deste trabalho foi selecionar e caracterizar estirpes nativas de Bacillus thuringiensis tóxicas a Diatraea saccharalis (Lepidoptera: Crambidae. Cento e seis estirpes pertencentes ao Banco de Bactérias de Invertebrados, da Embrapa Recursos Genéticos e Biotecnologia, foram testadas quanto à toxicidade a D. saccharalis, e, as mais tóxicas, caracterizadas por métodos bioquímicos e moleculares. Das 106 estirpes testadas, 16 causaram 100% de mortalidade em 24 horas. As três estirpes mais tóxicas apresentaram concentração letal média entre 8 e 43 ng cm-2. O perfil proteico das 16 estirpes mostrou a presença de proteínas de 130 e 65 kDa, e a caracterização molecular mostrou a presença dos genes tipo cry1 e cry2: cry1Aa, cry1Ab, cry1Ac e cry2Aa. A concentração letal média de esporos e cristais obtidos a partir de estirpes recombinantes, que expressavam individualmente os genes cry1Aa, cry1Ab, cry1Ac e cry2Aa, variou entre 222 e 610 ng cm-2, valores muito superiores aos das estirpes nativas mais tóxicas, que apresentavam possibilidade de expressão simultânea desses genes. Este resultado é indicativo de que há sinergia entre as toxinas. Há interação entre as toxinas de B. thuringiensis e seus receptores na broca-do-colmo da cana-de-açúcar.

  15. Diálisis peritoneal automática adaptada: un método de prescripción eficaz, eficiente y seguro

    Directory of Open Access Journals (Sweden)

    Sergi Aragó Sorrosal

    Full Text Available El objetivo del trabajo es analizar los resultados obtenidos tras la introducción de la modalidad de diálisis peritoneal automática adaptada, usando bicarbonato puro como agente tampón, en un grupo de pacientes en programa de diálisis peritoneal automática convencional. Estudio de diseño cuasi experimental, que se realizó entre los meses de febrero y diciembre de 2013, en la unidad de diálisis peritoneal del Hospital Clínic de Barcelona. Los sujetos de estudio fueron 12 pacientes, 7 mujeres y 5 hombres, de dicha unidad en modalidad de diálisis peritoneal automática convencional. Edad media 58±12 años (rango: 34-71. El estudio consistió en comparar dos modalidades de diálisis peritoneal automática. Se inició el estudio con prescripción de diálisis convencional, durante tres meses, para cambiar a modalidad de diálisis adaptada durante el mismo intervalo de tiempo. Y finalizarlo, con tres meses de pauta de diálisis convencional. Se prescribió el mismo volumen total de líquido de diálisis y tiempo de sesión, para cada paciente en ambas modalidades, variando los volúmenes y tiempos de permanencia en función de la modalidad. Se utilizó solución de diálisis con bicarbonato puro y glucosa 1,5%. Todos los pacientes, con día seco. Se monitorizaron las variables al inicio del estudio, y en cada cambio de prescripción. Los resultados obtenidos en diálisis convencional: Kt/v=2,3±0,2, aclaramiento de creatinina=63±8litros/semana, y ultrafiltración=842±110ml. En diálisis adaptada, Kt/v=2,8±0,2, aclaramiento de creatinina=74±9litros/semana, y ultrafiltración=982±123ml. La diálisis adaptada permite obtener una adecuada eficacia de tratamiento, mejora los parámetros de adecuación de diálisis y ultrafiltración; siendo segura y cómoda para el paciente.

  16. A importância da auditoria interna para uma gestão eficiente e eficaz em instituições hospitalares do setor público

    OpenAIRE

    Duarte, Mariana da Silva

    2017-01-01

    Versão final (Esta versão contém as críticas e sugestões dos elementos do júri) Na evolução das organizações as instituições hospitalares estão sujeitas a várias pressões, quer internas quer externas, pelo que são cada vez mais necessárias as atividades de auditoria interna de suporte à gestão que permitam atingir os seus objetivos. Uma vez que o serviço hospitalar se insere num ”mundo” complexo e de enorme dificuldade no que se refere à aquisição de um serviço de excelência...

  17. Gestión estrategica del talento humano consideraciones de juicio para el desarrollo eficiente de proyectos desde la optica del chaos manifiesto

    Directory of Open Access Journals (Sweden)

    Ariel Alfonso Reyes Castro

    2014-11-01

    Full Text Available Project management is a fertile ground for the development of processes that contribute to increasing the productivity of organizations. So from the early 50s of last century has been integrated engineering techniques but also of sociology. Focusing on the development of processes that facilitate the planning and programming phases. Using an accumulation of knowledge that become new knowledge being the support for the development of knowhow focused on task performance (PMBOK, management skills (IPMA, the development of functions (APM and the development of new performance criteria for project leaders (PMAJ these approaches to date do not guarantee the success of any project.

  18. Efficient mispriming during apolipoprotein E genotyping Iniciação errônea eficiente durante a genotipagem de apolipoproteína E

    Directory of Open Access Journals (Sweden)

    Gabriela Merheb de Azevedo Souza

    2005-02-01

    Full Text Available The determination of ApoE genotypes is a common clinical laboratory procedure. The most frequently used method involves a PCR amplification of the target region followed by a restriction enzyme digestion of the resultant amplicon to obtain a genotype-specific restriction fragment pattern. We describe an unexpected and surprising difficulty that was encountered during our routine laboratory casework.A determinação do genótipo da apolipoproteína E (ApoE é um procedimento clinicolaboratorial comum. O método mais freqüentemente utilizado envolve a amplificação por reação em cadeia de polimerase (PCR de uma região alvo, seguida pela digestão com enzima de restrição do fragmento resultante, obtendo-se, assim, um modelo de fragmentos de restrição genótipo-específico. Nós descrevemos uma dificuldade inesperada que encontramos durante nossa rotina laboratorial.

  19. Use of efficient lamps in Brazil and the energetic and environmental gains; Emprego de lampadas eficientes no Brasil e os ganhos energeticos e ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, Jamil; Nogueira, Luiz Augusto Horta; Cardoso, Rafael Balbino; Souza, Edson Palhares de [Universidade Federal de Itajuba (EXCEN/UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica], emails: jamil@unifei.edu.br, horta@unifei.edu.br, cardosorb@unifei.edu.br, palharess@unifei.edu.br

    2010-07-01

    This study esteem the energy, environmental and economical impacts the use of compact fluorescent lamps - CFL's in the Brazilian residential sector, considering data of the illumination systems ownership and use habits research in the sector, accomplished by PROCEL. According to evaluation the introduction of more efficient lamps in the sector resulted in 12.2 thousand GWh of energy saving (14.5% of the sector consumption) and in 4.4 GW of reduction in the pick demand (7% annual maximum demand registered) in 2005. The study also indicates positive impacts of the environmental and economical view point. (author)

  20. An efficient linear approach in the reservoirs operation for electric power generation; Uma eficiente abordagem linear na operacao de reservatorios para geracao de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Zambon, Katia Livia

    1997-07-01

    A new approach for the Scheduling of Hydrothermal Systems, with a formulation that allows the solution of the problem through the linear programming techniques, otherwise the original form, which is complex and difficult is presented. The models were developed through a linear form for the generation function of hydroelectric plants, successive of the linearization of the cost function of the problem. The linear techniques used were the Simplex Method, with some modification that is is efficient, fast and simple. The important physical aspects of the system were preserved, like the individual representation of the hydroelectric plant, the features of cost function with the exponential increase and the head effect. Besides, this formulation can lead to stochastic approaches. All the optimization methods were implemented for the solution of the problem. The performance obtained were compared with each other and with that obtained through the non linear techniques. The algorithms showed to be efficient, with good results and very near to the optimal behavior of the reservoir operation planning obtained by traditional methods. (author)

  1. Regras de prioridade eficientes que exploram características do Job Shop Flexível para a minimização do atraso total

    Directory of Open Access Journals (Sweden)

    Everton Luiz de Melo

    2015-03-01

    Full Text Available Este trabalho aborda o ambiente de produção Job Shop Flexível (JSF, extensão do problema NP-Difícil Job Shop. O JSF envolve um conjunto de jobs compostos por operações e cada operação deve ser processada em uma das máquinas habilitadas. O critério considerado é a minimização do atraso total. Inicialmente são identificadas características relacionadas à flexibilidade do sistema de produção, mais especificamente às máquinas habilitadas por operação e aos seus tempos de processamento. A seguir são propostas novas regras que exploram tais características e que são capazes de antever estados futuros do sistema. São realizados experimentos computacionais com 600 instâncias. Comparações com regras da literatura mostram que a melhor heurística proposta supera a melhor regra conhecida em 81% das instâncias.

  2. Glycerol as green solvent for efficient obtention of beta -hydroxyesters; Glicerol como solvente verde em eficiente obtencao de beta-hidroxiesteres

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Simone Santos de Sousa; Fiaux, Sorele Batista; Barreto, Igor Ramon Lomba; Muri, Estela Maris Freitas; Dias, Luiza Rosaria Sousa, E-mail: ldias@vm.uff.br [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Faculdade de Farmacia; Ramos, Maria da Conceicao Klaus V.; Aquino Neto, Francisco Radler de [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Tecnologia. Instituto de Quimica

    2014-05-15

    In this work, we report a new method for obtaining racemic β-hydroxyesters by reduction of β-ketoesters. The use of glycerol as a reactional medium in selective reduction of β-ketoesters into the corresponding alcohols was shown to be a viable and more efficient alternative compared with the conventional methodology, taking into account green chemistry prerogatives. (author)

  3. EVALUACIÓN DEL IMPACTO ECONÓMICO EN DIFERENTES ESCENARIOS DE IMPLEMENTACIÓN DE TECNOLOGÍAS EFICIENTES DE CALENTAMIENTO DE AGUA EN EL ECUADOR

    OpenAIRE

    Ríos Villacorta, Alberto

    2016-01-01

    The present article describes the different technologies and domestic water heating . A methodology for benchmarking the energy, economic and environmental performance of different types of existing technologies domestic water heating is presented. The economic impact of the integration of water heating systems in different energy futures in Ecuador is also evaluated. The ar ticle focuses on the technologies used in rec...

  4. Correspondência eficiente de descritores SIFT para construção de mapas densos de pontos homólogos em imagens de sensoriamento remoto

    Directory of Open Access Journals (Sweden)

    Marcelo Teixeira Silveira

    Full Text Available Métodos automáticos de localização de pontos homólogos em imagens digitais baseados em área, combinados com técnicas de crescimento de região, são capazes de produzir uma malha densa e exata de pontos homólogos. Entretanto, o processo de crescimento de região pode ser interrompido em regiões da imagem, cuja paralaxe no eixo horizontal apresenta variação abrupta. Essa situação geralmente é causada por uma descontinuidade na superfície ou espaço-objeto imageado, tal como um prédio numa cena urbana ou um paredão de exploração de uma mina a céu aberto. Nesses casos, novos pares de pontos homólogos (sementes devem ser introduzidos, normalmente por um operador humano, a partir dos quais o processo é reiniciado. Dependendo do tipo da imagem utilizada e da estrutura 3D da região mapeada, a intervenção humana pode ser considerável. Uma alternativa totalmente automatizada em que se combinam as técnicas SIFT (Scale Invariant Feature Transform, pareamento por mínimos quadrados e crescimento de região foi proposta anteriormente pelos autores. O presente trabalho apresenta uma extensão a essa técnica. Basicamente, propõem-se alterações na etapa de correspondência do SIFT, que exploram características de estereogramas produzidos por sensores aéreos e orbitais. Avaliações experimentais demonstram que as modificações propostas trazem dois tipos de benefícios. Em primeiro lugar, obtém-se um aumento do número de pontos homólogos encontrados, sem aumento correspondente na proporção de falsas correspondências. Em segundo lugar, a carga computacional é reduzida substancialmente.

  5. Factores para la implementación eficiente de un sistema de control de gestión en las organizaciones

    OpenAIRE

    Diaz Cordero, Lorena; Valles Restrepo, Dario Alejandro; Peraza Gonzalez, Daniel Ricardo

    2014-01-01

    La implementación del MCS es una necesidad que demandan las organizaciones en la medida en que incrementan de tamaño, pero la experiencia muestra que esta metodología tiene casos de éxito como de fracaso, por lo que es importante identificar y contemplar los factores que influyen en la implementación para que el sistema sea efectivo. Este proyecto pretende analizar las variables y herramientas para la implementación de un MCS en una organización. Para este análisis se hizo una amplia re...

  6. Detección Eficiente de Elipses en Imágenes. Aplicación al Posicionamiento 3D de un Robot Industrial

    Directory of Open Access Journals (Sweden)

    Eusebio de la Fuente López

    2012-10-01

    Full Text Available Resumen: En este artículo se presenta un algoritmo para la detección de elipses en imágenes, cuyo objetivo es el cálculo d e la posición 3D de una característica circular en una aplicación robótica. El algoritmo emplea un procedimiento estocástico RANSAC cuya eficiencia ha sido mejorada. El muestreo aleatorio ha sido sustituido por un muestreo guiado sobre las cadenas de contorno de la imagen, que son ordenadas de acuerdo a un criterio de probabilidad de formar parte de la elipse buscada. Esta estrategia disminuye notablemente la cantidad de muestras necesarias, permitiendo que el algoritmo sea adecuado para tiempo real. Abstract: In this paper, we present a ellipse detection algorithm developed to measure the 3-D position of a circular feature in a robotic application. The algorithm uses a RANSAC stochastic procedure whose efficiency has been significantly improved, substituting the random sampling with a guided sampling on the curve segments in the image. The contours of the image are first split analyzing their curvature. Then the curve segments are sorted according to their likelihood to be part of the ellipse. We have used the length as a prior indicator of this likelihood. The RANSAC algorithm starts considering only the longer curve segments whilst shorter curve segments are progressively incorporated. This strategy notably diminishes the amount of samples needed and makes the algorithm suitable for real time. Palabras clave: Reconocimiento de Patrones, Estimación Robusta, Visión para Robots, Robots Industriales, Keywords: Visual Pattern Recognition, Robust Estimation, Robot Vision, Industrial Robots

  7. Firmar la paz: decisión eficiente, pero costosa: Perspectiva desde el análisis económico del derecho

    Directory of Open Access Journals (Sweden)

    Sandra Milena Otero Álvarez

    2013-09-01

    Full Text Available The decision of exploring the path of peace undertaken by the State and the illegal armed group of FARC is addressed in this work. Through Efficient Hypothesis and EAL instruments, current reality of both parties is studied, and the future of the peace process is envisioned. This perspective offers conclusions that ordinary law cannot provide

  8. Odors in wastewater: How to control them efficiently by the manager?; Olores en aguas residuales: Como controlarlos de manera eficiente por el gestor?

    Energy Technology Data Exchange (ETDEWEB)

    Zarca Diaz de la Espina, E.; Palacios Moreno, C.

    2012-07-01

    Description, analysis and recommendations based on experience and research of the authors in the Municipal Water Utility. With 10 rules gives an overview of the different aspects, theoretical and practical, to be considered in the management of odors in wastewater treatment. (Author)

  9. Water use efficiency: a contribution to sustainable development of agriculture Utilización eficiente de água: una contribución para el desarrollo agropecuário sustentable Uso eficiente da água: uma contribuição para o desenvolvimento sustentável da agropecuária

    OpenAIRE

    Demétrios Christofidis; C. A. S. Oliveira; Francisco Faggion

    2009-01-01

    In most of the irrigated agricultural areas the volume of water used is higher than actually necessary for the satisfactory production of food. The efficiency in water use can help in solving the problems of scarcity, reduce conflicts between users and increase, stabilize and ensure the production. This paper shows possible alternatives for the water use efficiency in agriculture, based on guidelines developed in Europe and the United States, seeking to establish criteria for appropriate use ...

  10. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1995-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  11. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1996-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  12. Social and environment impact with the use of the panels made of woody fibers in the Mexican Southeast; Impacto social y ambiental del uso de paneles a base de fibras lenosas del Sureste mexicano

    Energy Technology Data Exchange (ETDEWEB)

    Bojorquez, Inocente; Flores, Fernando; Lizcano, Francisco; Lopez, Omar; Perez, Maria M; Dominguez, Jose A; Villanueva, Victor A [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico)

    2000-07-01

    All the present, the topics comfort and both save and efficient use of the energy are very important aspects in the housing design, link to it both the physiological and economic stability of the occupants. No matter the type, size, social status or geographical location, a house must provide to the occupant relax and comfort. Saegert says that the human being's behavior is positive when he lives in a better environment at the same time, the environment produces on the man a better behavior. That assertion and the housing problematic considering economic, quality and dignity aspects are the topics of this work. [Spanish] Hoy en dia se va haciendo comun considerar para el diseno habitacional los aspectos de confort y de ahorro y uso eficiente de la energia y muy ligado a estos, la busqueda de la estabilidad fisiologica y economica de los ocupantes. Sin importar el tipo, tamano, condicion social o ubicacion geografica, una casa-habitacion debe cumplir con el objetivo para el que fue creada: proporcionar las condiciones necesarias para que el ocupante relaje su cuerpo y desestrece su mente. Saegert sostiene que el ser humano actua productiva y positivamente cuando vive en un ambiente que cumple con sus expectativas y a la vez el ambiente provoca que el hombre determine su comportamiento. Las aseveraciones anteriores aunadas a la problematica de la demanda de vivienda que debe ser resuelta tanto en terminos economicos, como en terminos de calidad y dignidad son los considerados que se abordan en este trabajo.

  13. Strategies for energy saving in warm climate dwellings; Estrategias de ahorro de energia para viviendas en clima calido

    Energy Technology Data Exchange (ETDEWEB)

    Pilatowsky, I [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico (Mexico); Ramos Niembro, Gaudencio [Comision Nacional para el Ahorro de Energia -CONAE (Mexico); Morillon, David [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico); Oskam, A. [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico (Mexico)

    2008-04-15

    The domestic sector consumes almost one quarter of the national electrical energy. In order to reduce in an important manner the power consumption in dwellings there is an integral alternative based on three elements: the bio-climatic design, the saving and efficient use of the energy in equipment and apparatuses, and the use of centralized air conditioning systems. Besides saving the electrical and thermal power consumption, with this scheme, comfort conditions are pretended to be reached in dwellings and, contributing at the same time, to the diminution of polluting emissions. [Spanish] El sector domestico consume casi una cuarta parte de la energia electrica nacional. Con objeto de reducir de manera importante el consumo de energia en las viviendas, se presenta una alternativa integral, basada en tres elementos: el diseno bioclimatico, el ahorro y uso eficiente de la energia en equipos y aparatos, y la utilizacion de sistemas de climatizacion centralizados. Ademas del ahorro en el consumo de energia electrica y termica, con este esquema se pretende alcanzar condiciones de confort en las viviendas y, al mismo tiempo, contribuir a la disminucion de emisiones contaminantes.

  14. Design and construction of a prototype for the obtention of {sup 32} P; Diseno y construccion de un prototipo para la obtencion de {sup 32} P

    Energy Technology Data Exchange (ETDEWEB)

    Alanis M, J. [ININ, Departamento de Materiales Radiactivos, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-12-15

    In the National Institute of Nuclear Research (ININ) it was designed, built and proved a prototype to obtain {sup 32}P in form of H{sub 3} {sup 32}PO{sub 4}, starting from irradiated S{alpha}. The beginning of the prototype it is based on a distillation system in dry of the S{alpha} in nitrogen atmosphere, and in the formation of the ion {sup 32}PO{sub 4}{sup 3-} in acid solution. Due to the handling of radioactive material during the process, the prototype is inside a hot cell and it has a cylindrical oven that opens up lengthwise to the half, with controller of temperature and with a system of empty air for to transport reagents and products. The air-vacuum system is provided of filters and traps. The tests showed a recovery from 14 to 15% of the activity obtained during the irradiation. (Author)

  15. Design and construction of a live insulator washing system for transformers; Diseno y construccion de un sistema de lavado en vivo para los aisladores de transformadores

    Energy Technology Data Exchange (ETDEWEB)

    Lizama-Camara, Y.A. [Universidad Veracruzana, Veracruz (Mexico)]. E-mail: yahir_lizama@ieee.org; Mendieta-Antunez, J.A.; Blanco-Brisset, E. [Industrias IEM, Tlalnepantla, Estado de Mexico (Mexico)]. E-mail: unamanu@hotmail.com; Olivares Galvan, J.C.; Escarela-Perez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)]. E-mails: jolivare_1999@yahoo.com; r.escarela@ieee.org

    2012-04-15

    Through the electrical industry history there have been developments of different cleaning methods to avoid the insulators flashover s due to pollution. This paper describes the principal cleaning methods applicable to transformers insulators, emphasizing the high pressure fixed-type live insulator washing method, which was applied for cleaning the insulators of 900 MVA transformer bank of the Laguna Verde power plant localized at the state of Veracruz in Mexico. We propose a transformer insulator cleaning methodology, which identifies the main variables to take into account (the voltage level of the transformers, the pollution level of the insulators, determination of the optimal wash time, the amount of water, the optimal pressure of water jet, the maximum conductivity of the water and the wind velocity), reference values are given for these variables. In addition, we present an economic cost analysis when applying a method of this kind in an electric substation. [Spanish] A lo largo de la historia de la industria electrica se han desarrollado diferentes metodos de limpieza para evitar las fallas de los aisladores de los transformadores debido a la contaminacion. Este articulo describe los principales metodos de limpieza aplicables a los aisladores de transformadores, enfatizando el sistema de lavado en vivo tipo fijo con agua a alta presion, metodo que fue aplicado para realizar la limpieza de los aisladores en el banco de transformadores de 900 MVA de la central electrica Laguna Verde, ubicada en el estado de Veracruz, en Mexico. Se propone una metodologia para la limpieza de los aisladores de transformadores, donde se identifican las principales variables a tomar en cuenta (el nivel de tension de los transformadores, nivel de contaminacion de los aisladores, determinacion del tiempo optimo de lavado, cantidad de precipitacion de agua, presion optima del chorro de agua, maxima conductividad del agua y las velocidades de los vientos) y se dan valores de referencias de estas. Ademas se presenta un analisis economico al aplicar un metodo de este tipo en una subestacion electrica.

  16. Aspects of radiological protection on industrial irradiators, design and main uses; Aspectos de seguridad radiologica en irradiadores industriales disenos y principales usos

    Energy Technology Data Exchange (ETDEWEB)

    Peregrina M, A; Martinez A, C [Comision Nacional de Seguridad Nuclear y Salvaguardias, Col. Florida, Mexico, D.F. (Mexico)

    1991-07-01

    The governments of different countries among them Mexico are regulating the use of the gamma irradiation like alternative method for the food conservation, that which implies the use of a radioactive facility with specifications of radiological and physical safety that allow the secure use of the used radioactive material, of there the inquietude of the presentation of this topic.

  17. Designing a power supply for Nim-bin formatted equipment; Diseno de una fuente de alimentacion para equipos con formato Nim-bin

    Energy Technology Data Exchange (ETDEWEB)

    Banuelos G, L. E.; Hernandez D, V. M.; Vega C, H. R., E-mail: lebluis2012@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas, Zac. (Mexico)

    2016-09-15

    From an old Nuclear Chicago power supply that was practically in the trash, was able to recover the 19 inches casing, rear connectors and the housing where the circuits were. From here all mechanical parts were cleaned and the electronic design was started to replace the original voltage and current functions of this equipment. The cards for the ±6, ±12 and ±24 voltages were designed, simulated and tested with circuitry that does not rely on specialized components or that is sold only by the equipment manufacturer. In the handling of the current by each voltage to operate, was possible to tie with the specifications of the manufacturers like Ortec or Canberra where a model of power supply gives a power of 160 Watts. Basic tests were performed to show that the behavior is very similar to commercial equipment; such as the full load regulation index and the noise level in the supply voltages. So our Nim-bin voltage source is viable for use in our institution laboratories. (Author)

  18. Risks and challenges associated with the design and construction of a nuclear power plant; Control de riesgos y retos asociados al diseno y construccion de una central nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Liebana Martinez, B.; Armas Garcia, A.; Martinez Gozalo, I.

    2011-07-01

    The construction of a nuclear power plant project, considering the period prior to the operation of the plant, requires a very strict risk control to ensure compliance with a series of challenges. The present paper identifying the most important challenges facing the construct ability and license requirements of the process, identifying the interfaces and proposing a methodology of construction to meet the challenge of a construction process in 5 years.

  19. Design of a dosimetric evaluation protocol workers granite quarries; Diseno de un protocolo de evaluacion dosimetrica a trabajadores de canteras de granito

    Energy Technology Data Exchange (ETDEWEB)

    Guillen, J.; Tejado, J. J.; Baeza, A.

    2011-07-01

    The Autonomous Community of Extremadura is one of the major regions of Spain as far as the extraction of granite and further processing of products derived from it are concerned. One of the most industrialized areas of the sector presents a serious problem for non-radiological occupational health of workers, particularly silicosis. Since in this area of activity levels of granites can be classified as medium-high within the precipitates ranges, the question is whether in addition to this occupational disease, there is a radiological impact associated with the activity NORM extraction and manufacturing of granite.

  20. Heuristic rules analysis on the fuel cells design using greedy search;Analisis de reglas heuristicas en el diseno de celdas de combustible usando busqueda greedy

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, J. J.; Castillo, J. A.; Montes, J. L.; Hernandez, J. L., E-mail: juanjose.ortiz@inin.gob.m [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2009-10-15

    This work approaches the study of one of the heuristic rules of fuel cells design for boiling water nuclear reactors. This rule requires that the minor uranium enrichment is placed in the corners of the fuel cell. Also the search greedy is applied for the fuel cells design where explicitly does not take in count this rule, allowing the possibility to place any uranium enrichment with the condition that it does not contain gadolinium. Results are shown in the quality of the obtained cell by search greedy when it considers the rule and when not. The cell quality is measured with the value of the power pick factor obtained, as well as of the neutrons multiplication factor in an infinite medium. Cells were analyzed with 1 and 2 gadolinium concentrations low operation conditions at 120% of the nominal power of the reactors of the nuclear power plant of Laguna Verde. The results show that not to consider the rule in cells with a single gadolinium concentration, it has as repercussion that the greedy search has a minor performance. On the other hand with cells of two gadolinium concentrations, the performance of the greedy search was better. (Author)

  1. Expansion design for a Laboratory of Radioactive Sources Handling type II, class B; Diseno de ampliacion para un Laboratorio de Manejo de Fuentes Radiactivas tipo II, clase B

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez S, P. S.

    2014-07-01

    This work presents the expansion design of the Radioactive Wastes Research Laboratory (RWRL) installation authorized by the Comision Nacional de Seguridad Nuclear y Salvaguardias (Mexico) as type II class C, to manage 40 different radionuclides, approximately. The RWRL has 4 areas at the present time: a laboratory of instrumental analysis, one of radioactive material processes, other of counting and a chemical reagents stock, which is not integrated to the operation license of the RWRL. With the purpose of expanding the operation license of the RWRL to an installation type II class B, to manage until 370 MBq of high radio toxicity radionuclides, is presented in this work an expansion proposal of the RWRL. The expansion proposal is based in: (1) the Mexican Nuclear Standard NOM-027-Nucl-1996 for installations type II class B, (2) the current distribution of water, light, electricity, extraction, gas, air and vacuum services of RWRL, and (3) the available areas inside the building that the RWRL occupies. The proposal contemplates the creation of additional new areas for RWRL: 3 laboratories, 2 dressing rooms, 2 bathrooms and 2 warehouses, one for radioactive materials and another for reagents chemical radiologically inactive. Architectural, electric, hydraulic, extraction and gas planes corresponding to the expansion of RWRL were realized. Inside the proposal the budget required to carry out the mentioned expansion is also presented. (Author)

  2. Design and implementation of a virtual laboratory of radiation measurement; Diseno e implementacion de un laboratorio virtual de medicion de radiaciones

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez T, J. R.; Morales S, J. B. [Facultad de Ingenieria, UNAM, Ciudad Universitaria, 04510 Mexico, D. F. (Mexico)], e-mail: jms0620@yahoo.com.mx

    2009-10-15

    The work involves the implementation of a virtual laboratory, this project is conducted in the Faculty of Engineering of National Autonomous University of Mexico with the name of LANUVI. It is intended that the laboratory can be used by students who have interest in the nuclear radiation knowledge as well as in its detection and attenuation, in addition serve as and introduction to nuclear systems. In the first part of project will conduct a source that can simulate the particle radiation of Alfa, beta, neutrons and gamma rays. The project will take sources used in class laboratories and elements that are dangerous but are used in different practical applications. After taking the source analyzing the particles behaviour in different media like air, animal tissue, aluminium, lead, etc. The analysis is done in different ways in order to know with which material can stop or mitigate the different types of radiation. Finally shall be measure radioactivity with different types of detectors. At this point, has the behaviour of ionization chamber but in the future is expected to make the simulation of some other radiation detectors. The mathematical models we represent the behaviour of these cases were implemented in free software. The program will be used to implement the virtual laboratory with radiation sources, detectors and different types of shields will be Blender which is a free software that is used by many users for the embodiment of games but try to use as a tool to help visualize the different equipment that is widely used in a radioactive materials laboratory. (Author)

  3. Implementation of the Bee Colony Optimization method for the design of fuel cells; Implementacion del metodo Bee Colony Optimization para el diseno de celdas de combustible

    Energy Technology Data Exchange (ETDEWEB)

    Esquivel E, J.; Ortiz S, J. J., E-mail: jaime.esquivel@fi.uaemex.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2011-11-15

    The present work shows the results obtained after applying the Bee Colony Optimization algorithm in the design of fuel cells for a BWR. The algorithm that is implemented, works following the behavior that have the bees when pollinating a flowers field. The bees carry out an exhaustive analysis in the cell, so they leave generating diverse configurations where different fuel bars are placed with different uranium enrichments to reach a value mean, with a specific number of gadolinium bars. The behavior of the generated cell is evaluated by means of the use of the commercial code CASMO-4, which shows the variables that allow fixing if the cell fulfills the requirements. Such variables are the local potential peak factor and the neutrons multiplication factor in an infinite medium. (Author)

  4. Why development an technique and economic project of design of containers; Como realizar un proyecto tecnico y economico de ubicacion, construccion y diseno de los garbigunes

    Energy Technology Data Exchange (ETDEWEB)

    Ansoleaga Deusto, I.; Urrutxi Armoriaga, P.

    2000-07-01

    Summary: The Garbigunes is Garbiker's star service because of its popularity. The main reasons are its free brand, an intelligent advertising work which promotes the environment culture of the citizens of Vizcaya, adequate equipment and installations and a responsible and efficient management. (Author)

  5. Hodoscope performance and design; Construction et comportement d'un odoscope; Demonstratsiya i konstruktsiya godoskopa; Diseno y caracteristicas de funcionamiento de un hodoscopio

    Energy Technology Data Exchange (ETDEWEB)

    Boyarski, A; Ritson, D [Massachusetts Institute of Technology, Cambridge, MA (United States)

    1962-04-15

    The performance and circuitry of a hodoscoped array of 200 counters used on an experiment at Brookhaven is described. The circuitry, transistors, and phototubes all showed remarkable long-term stability. The lifetime of the transistors was 0.5 x 10{sup 8} h, and only one out of the 200 phototubes deteriorated after six months use. A simple set of diagnostic routines checked performance of the apparatus in half an hour. The data was recorded on film, and the film was read with a ''programmed spot'' scanner into the M.I.T. TXO computer. One hour is required to read a 400-ft roll of film by this system. A simple modification has been made to the apparatus whereby the data is stored in parallel into a shift register and then read out serially onto magnetic tape. Such a system writes a 300-bit event on to tape in 1 ms and obviates the necessity for buffer storage. (author) [French] Les auteurs decrivent le comportement et le circuit d'un odoscope de 200 compteurs utilise a l'echelon du laboratoire a Brookhaven. Le circuit, les transistors et les phototubes se sont reveles extremement stables sur une longue periode. Les transistors ont fonctionne 0,5 {center_dot} 10{sup 8} heures et un seul des 200 phototubes a ete endommage apres six mois d'usage. Grace a un programme de controle systematique, on a pu verifier le comportement de l'appareil en une demi-heure. Les donnees ont ete enregistrees sur films et le film a l'aide d'un teledecteur a spot programme dans un calculateur M.I.T. TXO. Ce systeme permet de lire plus de 1,20 m de pellicule en une heure. On a modifie l'appareil d'une maniere simple qui permet de stocker les donnees en parallele dans un registre a decalage et de les lire, par series, sur une bande magnetique. Ce systeme permet d'ecrire un evenement de 300 chiffres binaires sur la bande en un millieme de seconde et d'eviter de recourir a la memoire intermediaire. (author) [Spanish] La memoria describe las caracteristicas de funcionamiento y los circuitos de un sistema de 200 contadores dispuestos para hodoscopia, que se ha empleado en Brookhaven para fines experimentales. Los circuitos, los transistores y los fototubos se mostraron sumamente estables a largo plazo. La vida de los transistores fue de 0,5 . 10{sup 8} horas, y solo uno de los 200 fototubos se estropeo a los 6 meses de funcionamiento. El correcto funcionamiento del aparato es comprobado en media hora por una sencilla serie de rutinas de diagnostico. Los autores registraron los datos en una pelicula que fue leida por un barrido programado en la calculadora TXO del Massachusetts Institute of Technology. Para leer 400 pies (122 metros) de pelicula por este sistema, se precisa una hora. Se ha introducido una pequena modificacion en el aparato, que ahora almacena los datos paralelamente en un registro de desplazamiento y los pasa en serie a una cinta magnetica. Este sistema escribe en cinta un suceso de 300 bits en un milisegundo y hace innecesario el almacenaje intermedio. (author) [Russian] Daetsya opisanie raboty i skhemy godoskopnoj sistemy iz dvukhsot schetchikov, primenennoj vo vremya opyta v Brukkhevene. Skhema, tranzistory i fotoehlementy obnaruzhili isklyuchitel'nuyu prodolzhitel'nost' dejstviya. Vremya zhizni poluprovodnikovogo trioda 0,5 x 10{sup 8} chasov, i tol'ko odin fotoehlement iz 200 iznosilsya posle trekhmesyachnogo ispol'zovaniya. Prostoj ryad diagnosticheskikh osmotrov pozvolyaet proveryat' rabotu apparata cherez kazhdye polchasa. Dannye zapisyvayutsya na plenku, kotoraya chitaetsya s pomoshch'yu perfroirovannogo razvertyvatelya na vychislitel'noj mashine TKHO Massachusetskogo tekhnologicheskogo instituta. Po ehtoj sisteme trebuetsya odin chas, chtoby prochitat' 400 futov plenki. Delaetsya prostoe izmenenie v apparate, posredstvom kotorogo dannye razmeshchayutsya parallel'no v registratore smeshcheniya i zatem seriyami zachityvayutsya na magnitofonnuyu lentu. Takaya sistema zapisyvaet 300 znakov na plenku v odnu millisekundu i ustranyaet neobkhodimost' buffernogo khraneniya. (author)

  6. Design and construction of a computerized optical densitometer for X-ray films; Diseno y construccion de un densitometro optico computarizado para peliculas de rayos-X

    Energy Technology Data Exchange (ETDEWEB)

    Vicuna V, H.G.; Picon C, C.; Zaharia B, M. [Instituto de Enfermedades Neoplasicas, Departamento de Radioterapia, Servicio de Fisica, Av. Angamos Este 2520, Lima 34 (Peru)

    1998-12-31

    In Radiotherapy Departments, where it is disposed of radiation units, these require of a control quality of their parameters as: dose in depth, real size, symmetry and levelling of the radiation field. In order to fulfil above it was designed and built a totally automated system for scanning and analysing the X-ray films or plates, which serve to have the parameter information to be measured. (Author)

  7. Coupling of the four design stages in the management of nuclear fuel; Acoplamiento de las cuatro etapas de diseno en la administracion de combustible nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Marinez R, R. L.

    2016-07-01

    In this work, the main characteristics of the system to solve the four stages of the nuclear fuel management are presented; the above for boiling water reactors (BWR). The novelty of the system is that a complete solution is obtained in a coupled way; the involved stages are fuel lattice design, fuel assembly design, fuel reload design and control rod pattern design. To do this, in each stage of the process some heuristics techniques are applied, and each stage has its own objective function. The used heuristic techniques are neural network and a hybrid between scatter search and path re linking for fuel lattice design; for fuel assembly design a simple local search was applied and finally, for both fuel reload and control rod pattern designs, the tabu search technique was used. The system have two loops, one external loop and one internal loop, the first one starts with fuel lattice design and concludes with control rod pattern design; on the other hand, the internal loop executes an iterative process between both fuel reload design and control rod pattern designs, to start this loop a seed fuel reload is required, which is obtained applying Haling principle. The internal loop is finished when four iterations were achieved, while the external loop is finished when two iterations were achieved, this number of iterations was fixed due to the great quantity of required computational resources. An 18- months equilibrium cycle was considered to have a reference value to compare against the obtained results with our system, this cycle have two fuel fresh batches with the same average uranium enrichment, but different gadolinia content. The above cycle achieved a 10,896 Mwd/Tu of energy and was divided into 12 burnup steps. The obtained results show the advantage to solve the complete problem in a coupled way, even though a great quantity of computational resources are used. It is necessary to note that the energy value was not achieved in all cases, only in some examples. The system was programmed using FORTRAN language and all tests were executed in a cluster under LINUX platform. (Author)

  8. Design aspects and conservation of roads in the saving of energy; Aspectos de diseno y conservacion de carreteras en el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Cajun, Carlos S; Aguerrebere Salido, Roberto [Instituto Mexicano del Transporte, Queretaro (Mexico)

    1993-12-31

    In this paper the effects that on the fuel consumption the roads have for their slopes and roughness are presented. A mathematical model is presented which shows the relationship between the slope, the roughness coefficient and the required power to overcome the corresponding resistance; the former in order to predict the fuel consumption and therefore, the potential level of energy saving corresponding to this item. [Espanol] En este trabajo se presentan los efectos que sobre consumo de combustible se tienen, debido a las pendientes y rugosidades de las carreteras. Se presenta un modelo matematico que muestra la relacion entre la pendiente, el coeficiente de rodamiento y la potencia requerida para vencer las resistencias correspondientes; lo anterior con el fin de predecir el consumo de combustible y, por lo tanto, los niveles potenciales de ahorro de energia correspondientes a este rubro.

  9. Optimization of SFR Reactor design with recycling or minor actinides; Optimizacion del diseno de reactor SFR con reciclado de actinidos minoritarios

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Fuertes, F.; Vazquez, M.; Alvarez, F.

    2012-07-01

    In this paper we show results of the design features and ESFR optimized in three configurations: the reference, load the minority actinides homogeneous throughout the reactor and the high content of AM on a radial mantle. Was calculated reactivity evolution in five cycles burned (2050 days) to recharge One approach. To do this, we have employed EVOLCODE2 a development tool of CIEMAT own coupling MCNPX and ORIGEN.

  10. Diseno de un indice para la medicion de la calidad fisicoquimica del agua piscicola. Aplicacion a la Cuenca Hidrografica del Jucar

    OpenAIRE

    Beamonte Cordoba, Eduardo; Bermudez Edo, Jose D.; Casino Martinez, Alejandro; Veres Ferrer, Ernesto J.

    2006-01-01

    El objectivo principal de este trabajo es proponer un indice para el estudio de la calidad fisicoquimica del agua, en un contecto probablistico. Este indice se utiliza para evaluar la calidad del agua de uso piscola. La metodologia aqui propuesta se aplica a los datos observados en un amplico conjunto de puntos de muestreo ubicados en la cuenca hidrografica del Jucar...The aim of this paper is to propose an index for water quality into a probability context, This index is utilized to evaluate...

  11. The anti corrosive design of structural metallic elements in buildings with large exploitation period; El diseno anticorrovio de elementos estructurales metalicos en edificaciones con periodos prolongados de explotacion

    Energy Technology Data Exchange (ETDEWEB)

    Avila Ayon, V.; Rodriguez Quesada, A. L.

    2009-07-01

    The corrosion deterioration in metallic structural elements, with the consistent loss of his physical and mechanical properties, is cause by errors in the design or fabrication, that allows the accumulation of humidity and contaminants in the surfaces, or acceleration zones of the corrosion processes, as the bimetalics pairs. The aggressiveness of the environment and the productive processes that develop in industrial installations, causes the apparition of premature failures that engage the edification use. The identification of design errors is the first step in the conservation of these structures. the elimination and made a project adapted to the proper installations conditions, is essential procedures to prolong the edification useful life with an optimum and rational use of the resources that destined for this end. The investigation is about the results obtained in the diagnostic and the conservation of industrial installment, with large exploitation periods, in which existed evidences of failures by corrosion, specifically to the elimination of errors of design. (Author) 12 refs.

  12. Design of a fuzzy logic based controller for neutron power regulation; Diseno de un controlador basado en logica difusa para la regulacion de flujo neutronico

    Energy Technology Data Exchange (ETDEWEB)

    Velez D, D

    2000-07-01

    This work presents a fuzzy logic controller design for neutron power control, from its source to its full power level, applied to a nuclear reactor model. First, we present the basic definitions on fuzzy sets as generalized definitions of the crisp (non fuzzy) set theory. Likewise, we define the basic operations on fuzzy sets (complement, union, and intersection), and the operations on fuzzy relations such as projection and cylindrical extension operations. Furthermore, some concepts of the fuzzy control theory, such as the main modules of the typical fuzzy controller structure and its internal variables, are defined. After the knowledge base is obtained by simulation of the reactor behavior, where the controlled system is modeled by a simple nonlinear reactor model, this model is used to infer a set of fuzzy rules for the reactor response to different insertions of reactivity. The reduction of the response time, using fuzzy rule based controllers on this reactor, is possible by adjusting the output membership functions, by selecting fuzzy rule sets, or by increasing the number of crisp inputs to the fuzzy controller. System characteristics, such as number of rules, response times, and safety parameter values, were considered in the evaluation of each controller merits. Different fuzzy controllers are designed to attain the desired power level, to maintain a constant level for long periods of time, and to keep the reactor away from a shutdown condition. The basic differences among the controllers are the number of crisp inputs and the novel implementation of a crisp power level-based selection of different sets of output membership functions. Simulation results highlight, mainly: (1) A decrease of the response variations at low power level, and (2) a decrease in the time required to attain the desired neutron power. Finally, we present a comparative study of different fuzzy control algorithms applied to a nuclear model. (Author)

  13. Advantages of using 3D design tools in the nuclear power plants projects; Ventajas del uso de herramientas de diseno 3D en los proyectos de centrales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.

    2011-07-01

    It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer time frames and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has intensive experience in the use of 3D design tools and is preprared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)

  14. Design of sustainable energetical model through area planification: Jaen (Spain); Diseno de un modelo energetico sostenible a traves de la planificacion territorial: El Caso de Jaen

    Energy Technology Data Exchange (ETDEWEB)

    Terrados, J.; Almonacid, G.; Martin, A.; Rodriguez, J. C.

    2004-07-01

    Strategic Planning is currently an extended tool for region development and territorial structuring. Cities, regions and provinces have carried out their strategic plans on the base of participation processes, which have driven the later development of their territories. This paper presents the elaboration of the energy part of the Strategic Plan of Jaen province and highlights the effectiveness of techniques from business management applied to a new energy model design. Main results along the first three year of Plan execution are also presented, mainly concerning its impact on the renewable energy sources contribution to the provincial energy structure. (Author)

  15. EERA-DTOC Project: Design Tools for Offshore Wind Farm Clusters; Proyecto EERA-DTOC: herramientas para el diseno de clusters de Parques Eolicos Marinos

    Energy Technology Data Exchange (ETDEWEB)

    Palomares, A. M.

    2015-07-01

    In the EERA-DTOC Project an integrated and validated software design tool for the optimization of offshore wind farms and wind farm clusters has been developed. The CIEMAT contribution to this project has change the view on mesoscale wind forecasting models, which were not so far considered capable of modeling wind farm scale phenomena. It has been shown the ability of the WRF model to simulate the wakes caused by the wind turbines on the downwind ones (inter-turbine wakes within a wind farm) as well as the wakes between wind farms within a cluster. (Author)

  16. Design of a chamber for deposit of thin films by laser ablation; Diseno de una camara para el deposito de peliculas delgadas por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Chirino O, S

    2001-07-01

    The present work has as purpose to design a vacuum chamber, to the one that is denominated chamber of ablation, in which were carried out deposits of thin films using the well-known technique as laser ablation. To fulfill the purpose, the work has been distributed in the following way: in the chapter 1 there are discussed the generalities of the technique of ablation laser for the obtaining of materials in form of thin film, in the chapter 2 the basic concepts of the vacuum technology are mentioned that includes among other things, systems to produce vacuum and vacuum gages and in the chapter 3 the design of the chamber is presented with the accessories and specific systems. (Author)

  17. Areva new fuel designs; increased reliability, operating margins and operating efficiency; Nuevos disenos de combustible Areva: aumento de fiabilidad, margenes operativos y eficiencia del funcionamiento

    Energy Technology Data Exchange (ETDEWEB)

    Mollard, P.; Vollmer, N.; Curca-Tivig, F.; Cole, S.; Louf, H. P.

    2015-07-01

    AREVA is continuously working on the improvement of the fuel design to address immediate and future needs of the utilities. This improvement process regularly leads to incremental changes but also to breakthrough changes addressing the next needs of the market. Since a few years now, the improvements of the fuel design and licensing benefit from the improvement and upgrade in codes and methods and computational capabilities. Changes in design are sustained by these more powerful and phenomenological tools which secure and fasten the fuel design optimization and its implementation. (Author)

  18. Methodology for the design of Santa Rosa de Cabal sanitary landfill, Risaralda; Metodologia para el diseno del relleno sanitario de Santa Rosa de Cabal, Risaralda

    Energy Technology Data Exchange (ETDEWEB)

    Tabares, J; Orozco, J

    1992-07-01

    In 1987 the Regional Autonomous Corporation of Risaralda, CARDER and the Risaralda Government, they signed a cooperation agreement, in order to endowing from sanitary landfill to the municipalities of the department. In the mark of this agreement it was carried out the design of Santa Rosa's sanitary landfill, that with near 50.000 inhabitants it is constituted in the third city of the department. This city generates some 25 tons/day of garbage that at the present time are heady directly to the waters of San Eugenio River. The present work contains the most important methodological aspects in the design of the sanitary landfill and some comments about the approaches ideal Vs real approaches of selection of places.

  19. Study of some physical aspects previous to design of an exponential experiment; Estudio de algunos aspectos fisicos previos al diseno de una experiencia exponencial

    Energy Technology Data Exchange (ETDEWEB)

    Caro, R; Francisco, J L. de

    1961-07-01

    This report presents the theoretical study of some physical aspects previous to the design of an exponential facility. The are: Fast and slow flux distribution in the multiplicative medium and in the thermal column, slowing down in the thermal column, geometrical distribution and minimum needed intensity of sources access channels and perturbations produced by possible variations in its position and intensity. (Author) 4 refs.

  20. Decorative design of ceramic tiles adapted to inkjet printing employing digital image processing; Diseno decorativo de pavimentos ceramicos adaptado a inyeccion de tinta mediante tratamiento digital de imagen

    Energy Technology Data Exchange (ETDEWEB)

    Defez, B.; Santiago-Praderas, V.; Lluna, E.; Peris-Fajarnes, G.; Dunai, E.

    2013-09-01

    The ceramic tile sector is a very competitive industry. The designer's proficiency to offer new models of the decorated surface, adapted to the production means, plays a very important role in the competitiveness. In the present work, we analyze the evolution of the design process in the ceramic sector, as much as the changes experimented in parallel by the printing equipment. Afterwards, we present a new concept of ceramic design, based on digital image processing. This technique allows the generation of homogeneous and non-repetitive designs for large surfaces, especially thought for inkjet printing. With the programmed algorithms we have compiled a prototype software for the assistance of the ceramic design. This tool allows creating continuous designs for large surfaces saving developing time. (Author)

  1. Design of a application of failure registration in equipment of radiotherapy treatments; Diseno de una aplicacion de registro de averias en los equipos de tratamientos radioterapico

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Ortega, J.; Rodriguez Cobo, C.; Pinto Monedero, M.; Rodriguez Romero, R.; Castro Tejero, P.; Sanchez Rubio, P.; Quintana Paz, A.

    2013-07-01

    It has developed an application that aims to provide a centralized database of service interventions, and can detect deficiencies at the time of response, percentages of operability or persistent failures in units. (Author)

  2. Design and fabrication of equipment and devices for a Radiotherapy department; Diseno y fabricacion de equipos y aditamentos para un departamento de Radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Picon, C.L.; Zaharia B, M. [Departamento de Radioterapia. Instituto de Enfermedades Neoplasicas, Av. Angamos Este 2520, Lima (Peru)

    1998-12-31

    The objective of this work is to present the possibility to design and construct utilizing local technology, a series of equipment and devices necessaries for a routine in a Radiotherapy Department with typical budget in the Latin-American hospitals. (Author)

  3. Design and implementation of a quality assurance program for gamma cameras; Diseno e implementacion de un programa de aseguramiento de calidad para camaras gamma

    Energy Technology Data Exchange (ETDEWEB)

    Montoya M, A.; Rodriguez L, A. [Instituto Nacional de Cancerologia, Departamento de Medicina Nuclear, Av. San Fernando No. 22, Col. Seccion XVI, 14080 Mexico D. F. (Mexico); Trujillo Z, F. E., E-mail: montoya-moreno@hotmail.co [Hospital Regional de Alta Especialidad de Oaxaca, Area de Fisica Medica, Aldama s/n, Paraje El Tule, 71256 San Bartolo Coyotepec, Oaxaca (Mexico)

    2010-09-15

    In nuclear medicine more than 90% of the carried out procedures are diagnostic. To assure an appropriate diagnostic quality of the images and the doses optimization received by the patients originated in the radioactive material, it is indispensable the periodic surveillance of the operation and performance of the equipment s by means of quality assurance tests. This work presents a proposal of a quality assurance program for gamma cameras based on recommendations of the IAEA, the American Association of Medical Physics and the National Electrical Manufacturers Association. Some tests of the program were applied to an e.cam gamma camera (Siemens) of the Nuclear Medicine Department of the National Institute of Cancer. The intrinsic and extrinsic uniformity, the intrinsic spatial resolution and the extrinsic sensibility were verified. For intrinsic uniformity the average daily values of the integral uniformity and differential uniformity in the useful vision field were 2.61% and 1.58% respectively, the average monthly values of intrinsic uniformity for the integral and differential uniformity in the useful vision field were 4.10% and 1.66% respectively. The used acceptance criterions were respectively of 3.74% and 2.74%. The average values of extrinsic uniformity for the useful vision field were of 7.65% (intrinsic uniformity) and 2.69% (extrinsic uniformity), in this case the acceptance criterion is a value of 6.00%. The average value of intrinsic spatial resolution went 4.67 mm superior to 4.4. mm that is the acceptance limit. Finally, maximum variations of 1.8% were observed (minors than 2% that is the acceptance criterion) for the extrinsic sensibility measured in different regions of the detector. Significant variations of extrinsic sensibility were not observed among the monthly lectures. Of the realized measurements was concluded that the system requires of a maintenance service by part of the manufacturer, which one carries out later on to this work. The implementation of a quality assurance program in nuclear medicine allows obtain diagnostic images of excellent quality, the doses optimization imparted to the patients, an exposition decrease to the occupationally exposed personnel, and in general it allows to improve the service productivity. This proposal can be used to develop similar quality assurance programs in other facilities also it can to act like an antecedent for the normative proposal for the quality assurance of equipment s in nuclear medicine. (Author)

  4. Design and construction of a system for determining Radon-222 through Alpha spectroscopy; Diseno y construccion de un sistema para determinar Radon-222 mediante Espectroscopia alfa

    Energy Technology Data Exchange (ETDEWEB)

    Bonifacio, J.; Iturbe, J.L

    1992-02-15

    The study of the present work consists on designing a system to measure gas {sup 222} Rn, using a surface barrier detector, in order to obtaining a more accuracy measure of this isotope by means of an alpha particle spectra and thus to try to avoid the influence of the radioactivity of the isotope descendants of short half life, which are also emitting of alpha particles, since by other methods its should make a series of corrections to obtain the real value of the radon activity. (Author)

  5. Design and construction of a system to determine Radon-222 through alpha spectroscopy; Diseno y construccion de un sistema para determinar Radon-222 mediante espectroscopia alfa

    Energy Technology Data Exchange (ETDEWEB)

    Bonifacio M, J. [Universidad Autonoma del Estado de Mexico. Facultad de Quimica. Toluca (Mexico)

    1991-12-31

    The purpose of this work consists in the design a radon-222 gas measurement system utilizing a surface barrier detector with the objective to obtain a more accurate measurement for this isotope through an alpha particle spectrum and so to address as to avoid the activity influence of the descendants of short half-life, which are too beta particles emitters, already other methods it must be correction series to obtain the real value of radon activity. Here are presented the general properties properties of radon, the experimental part description indicating the design to measure the radon-222 gas and its parts, as well as too the standard separation of radium-226 starting from carnotite mineral. Finally, it is presented the results obtained with a discussion about it. (Author) results obtained with a discussion about it. (Author)

  6. Design and construction of a prototype for the obtention of {sup 32}P; Diseno y construccion de un prototipo para la obtencion de {sup 32}P

    Energy Technology Data Exchange (ETDEWEB)

    Duarte A, C

    2003-07-01

    The {sup 32} P are a pure emitting radioisotope of maximum energy of 1.71 MeV with half life of 14.28 days that he has applications in the industry, in agriculture, in medicine, in biology and in ecology (6,11,12,13,17,21,22,23,24,25,26,27,28,29,30,31,32 33).The {sup 32} P can be used in the industry like radiotracer in the investigation of some operations and processes and as element of measurement of some industrial meters. In agriculture is used as radiotracer (29) in the investigation of diverse biological processes that have to do with the production of diverse nutritious products. In medicine has uses but very therapeutic mainly in the treatment of some become cancerous (28, 31, 25, 27) in the diagnosis of blood disorders (24) and like part of materials of production of aortic prosthesis (6). The {sup 32} P are also used in the molecular investigation in biology and in genetics (33), and in studies of ecosystems (32) and of DNA (22). One can obtain the {sup 32} P by means of diverse nuclear reactions depending on the material used as matter it prevails, since it doesn't exist in the nature. But anyone in the ways of obtaining it it should imply a process of radiochemical separation that involves so many steps like they are required, depending on the material used as matter prevails, of the purity with which he wants himself to obtain and of the resources that it has available. The objective of this work was design, to build and to prove a prototype to obtain the {sup 32} P to leave of the irradiation of S {alpha} with fast neutrons at experimental level, which implies also to design a process that contemplates diverse stages and procedures for each one of them. The process was outlined in five stages: matter purification prevails, preparation of irradiation capsules, irradiation of irradiation capsules, transport and opening capsules of irradiation and radiochemical separation. In the last stage it was where uses the prototype of radiochemical separation in basis to the outlined process and considering aspects of environmental and personal radiological safety, in such a way that the radiochemical separation carried out in two stages in the same prototype and with the less manipulation of the radioactive material.To know the functionality of the process and of the prototype, they were carried out three tests of these, in each one of those which the stages of the process were evaluated by means of mensuration of physicochemical parameters and by means of characterizations of the materials involved in these stages with diverse technical analytic instrumental: X-ray diffraction, X-ray fluorescence, scanning electron microscopy, high-purity Ge semiconductor detector proportional detector proportional of low bottom gas and liquid scintillation detector. The results of the process for stages showed that with the outlined method of purification of the matter prevails six of nine constituent elements they were removed of chemical sludges of the raw materials of the process, S {alpha}, and that with the process and the prototype of radiochemical separation it was reached to separate {sup 32} P of the S {alpha}. In general, it was reached to obtain {sup 32} P from S {alpha} irradiated with relatively small quantities of radiochemical impurities. (Author)

  7. Membrane Bioreactors design and operation improvements: The Spanish Experience; Avances en el diseno y la operacion de los biorreactores de membrana: La experiencia espanola

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias Esteban, R.; Ortega de Miguel, E.; Martinez Tarifa, M. A.; Simon Andreu, P.; Moragas Bouyart, L.; Garcia Fernandez, E.; Robuste Cartro, J.; Rodriguez-Roda layret, I.

    2012-07-01

    A Membrane Bioreactor (MBR) is a modification of a conventional activated sludge (CAS) plant where the secondary settling ins replaced by a low pressure ultrafiltration (UF) or micro filtration (MF) membranes separation process in order to obtain an effluent almost free of suspended solids and microorganisms. since the first MBR installation in 2002, the number and capacity of these systems have exponentially increased in spain, driven by the high quality of the effluent which allows direct reuse and discharge into environmentally sensitive areas, the compactness and automation of these plants and the possibility of upgrading existing wastewater treatment plants (WWTP) which no longer reach the required effluent quality levels. There were 45 operating MBR systems in 2011 and the total municipal wastewater treatment capacity by this type of plants will be about 90 hm{sup 3} in 204 when the current projects have been implemented. Today, Spain public and private wastewater management agencies consider MBR plants as an alternative of treatment but first they had to face a complex learning period to operate and design this kind of system. A significant progress has been made over the last years, but especially energy efficiency responds to the challenge of continuous improvement. Membrane fouling control consumes most of the energy involved in the process therefore, anti fouling materials and better membrane air-scour systems that allow the frequency and intensity of air flow to be controlled in realtime, are being investigated. This brings MBR closer to the CAS process in terms of energy efficiency. Breakthroughs in the design and operation of MBR plants are being collected in a guide for the implementation of MBR led by CEDEX, in which the main managers and operators are involved. This paper presents some of these improvements. (Author) 9 refs.

  8. AZTLAN platform: Mexican platform for analysis and design of nuclear reactors; AZTLAN platform: plataforma mexicana para el analisis y diseno de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edif. 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Francois L, J. L.; Martin del Campo M, C. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico); Espinosa P, G., E-mail: armando.gomez@inin.gob.mx [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico)

    2014-10-15

    The Aztlan platform Project is a national initiative led by the Instituto Nacional de Investigaciones Nucleares (ININ) which brings together the main public houses of higher studies in Mexico, such as: Instituto Politecnico Nacional, Universidad Nacional Autonoma de Mexico and Universidad Autonoma Metropolitana in an effort to take a significant step toward the calculation autonomy and analysis that seeks to place Mexico in the medium term in a competitive international level on software issues for analysis of nuclear reactors. This project aims to modernize, improve and integrate the neutron, thermal-hydraulic and thermo-mechanical codes, developed in Mexican institutions, within an integrated platform, developed and maintained by Mexican experts to benefit from the same institutions. This project is financed by the mixed fund SENER-CONACYT of Energy Sustain ability, and aims to strengthen substantially to research institutions, such as educational institutions contributing to the formation of highly qualified human resources in the area of analysis and design of nuclear reactors. As innovative part the project includes the creation of a user group, made up of members of the project institutions as well as the Comision Nacional de Seguridad Nuclear y Salvaguardias, Central Nucleoelectrica de Laguna Verde (CNLV), Secretaria de Energia (Mexico) and Karlsruhe Institute of Technology (Germany) among others. This user group will be responsible for using the software and provide feedback to the development equipment in order that progress meets the needs of the regulator and industry; in this case the CNLV. Finally, in order to bridge the gap between similar developments globally, they will make use of the latest super computing technology to speed up calculation times. This work intends to present to national nuclear community the project, so a description of the proposed methodology is given, as well as the goals and objectives to be pursued for the development of the AZTLAN platform. (Author)

  9. Mechanical design of the coils encapsulated of toroidal field of Tokamak TPM1; Diseno mecanico del encapsulado de las bobinas de campo toroidal del Tokamak TPM1

    Energy Technology Data Exchange (ETDEWEB)

    Caldino H, U.; Francois L, J. L., E-mail: ucaldino@outlook.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    The TPM1 is a small Tokamak that belongs to the Centro de Investigacion en Ciencias Aplicadas y Tecnologia Avanzada of Instituto Politecnico Nacional (CICATA-IPN); the project is under construction. Currently it has the vacuum chamber, and is intended that the machine can operate with electric pulses of 10 ms to study the behavior of plasmas in order to provide knowledge in the field of nuclear fusion by magnetic confinement. To achieve this goal is necessary to design the toroidal field coils which operate the Tokamak. This paper presents an analysis which was performed to obtain the correct configuration of coils depending on design parameters for operation of the machine. Once determined this configuration, an analysis of electromagnetic forces present in normal machine operation on one coil was conducted, this to know the stresses in the encapsulation of the same. Considering the pulsed operation, a thickness of 5 mm is determined in the encapsulated, considering fatigue failure based on studies of fatigue failures in epoxy resins. (Author)

  10. Geographical location as critical factor in design and planning for international projects; La localizacion geografica como factor critico en el diseno y planificacion de proyectos internacionales

    Energy Technology Data Exchange (ETDEWEB)

    Matranga, Mariana; Rawson, Carola; Pandolfi, Juan Martin; Guamantica, Diego; Eberle, Juan Manuel; Mastandrea, Martin [TECNA S.A., Buenos Aires (Argentina)

    2004-07-01

    The success of an international project is closely linked to the knowledge of the scene where the steps of construction, installation and operation will take place. In that sense, early consideration of geographic factors, socio-economic and environmental impact has proven to be determinant for the successful development of the phases of design, construction, transportation, assembly and operation. In the case of the Planta de Tratamiento de Gas Sabalo, taking into account the above factors not only enabled the efficient development of the various phases of the project, but also complete stages of assembly and start-up in twenty weeks. The Planta de Tratamiento de Gas Sabalo is located in the Chaco, region in the Bolivian jungle, and has a capacity of 13.4 MMSCMD gas specification, which makes the plant increased capacity in Bolivia and one of the highest capacity in South America. Companies in Brazil, Bolivia, Ecuador and Argentina were involved in the project, the latter in charge of its design, construction and management. Based on the experience of the project Sabalo, this article presents a series of lines especially applicable to international projects.

  11. Design of the HMI for the operation of a nuclear research reactor; Diseno del HMI para la operacion de un reactor nuclear de investigacion

    Energy Technology Data Exchange (ETDEWEB)

    Bucio V, F. J.; Celis del Angel C, L.; Palacios H, J. C., E-mail: francisco.bucio@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2017-09-15

    The Instituto Nacional de Investigaciones Nucleares (ININ) participated in an international tender published by the Colombian Geological Service for the modernization of the Nuclear Reactor Control Console Ian-R1, the participating institutions were: General Atomics (USA), INVAP (Argentina) and ININ (Mexico). The proposal made by the ININ had an important characteristic, the independence of the manufacturer, since it was a project based on modular elements. One of the elements was the Human-Machine Interface (HMI), where the development was proposed under the Free Software (Gnu-GLP) scheme. Java was the programming language on which the HMI was developed to operate the nuclear reactor in Bogota, Colombia. The instrumentation that allows the interaction with the sensors and/or actuators is based on the use of PLC's (programmable logic controllers) with which the computers of the HMI communicate through a local network using the Mod bus protocol over Ethernet. (Author)

  12. Design, construction and performance tests of a cascade impactor and an integral impactor; Diseno, construccion y pruebas de funcionamiento de un impactor de cascada y un impactor integral

    Energy Technology Data Exchange (ETDEWEB)

    Aldape U, F. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1987-06-15

    The analysis of samples of atmospheric aerosols collected by means of cascade impactores or differential it is facilitated in many aspects by means of the use of technical analytic based on faces of ions. The targets obtained with these apparatuses are those but suitable for their contained first floor of collected matter (1 mg/cm2 what allows the direct use of the samples in technical analytic as PIXE for their high sensibility and in their best interval of applicability. The objective of this work has been the design, construction and the first tests of operation of an impactor of the type Batelle, as well as of another of integral type. (Author)

  13. Expansion design for a radioactive sources handling laboratory type II class B; Diseno de ampliacion para un laboratorio de manejo de fuentes radiactivas tipo II clase B

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez S, P. S. [Universidad Mexiquense del Bicentenario, Av. Industria Poniente s/n, Parque Industrial Dona Rosa, 52000 Lerma, Estado de Mexico (Mexico); Monroy G, F.; Alanis, J., E-mail: salvador-21@live.com.mx [ININ, Carretera Mexico-Touca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-10-15

    The Radioactive Wastes Research Laboratory (RWRL) of the Instituto Nacional de Investigaciones Nucleares (Mexico), at the moment has three sections: instrumental analysis, radioactive material processes, counting and a license type II class C, to manipulate radioactive material. This license limits the open sources handling to 300 kBq for radionuclides of very high radio-toxicity as the Ra-226, for what is being projected the license extension to type II class B, to be able to manage until 370 MBq of this radionuclides type, and the Laboratory, since the location where is the RWRL have unused area. This work presents a proposal of the RWRL expansion, taking into account the current laboratory sections, as well as the established specifications by the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). The current planes of the RWRL and the expansion proposal of the laboratory are presented. (Author)

  14. Thermal design of a pressure electroslag remelting furnace applied for 5; Diseno termico de un horno presurizado de refusion por electroescoria de 5 Kg

    Energy Technology Data Exchange (ETDEWEB)

    Cruz M, J P

    1999-07-01

    Actual work defines the thermal design methodology for pressure electroslag remelting furnaces (P ESR) of variable capacity, applied for 5 Kg. It begins with classification and description of secondary refining furnaces, after PESR process and the concept of thermal design are described. Next, in base of the steel weight to remelt (5 Kg); ingot, crucible and electrode dimensions are obtained. These elements will be inside of pressure vessel whose thickness are determined according to ASMECode (Section 8, Division 1, U G-27). It was developed a computer program, where the furnace capacity can be modified, so like other conditions, and display principal dimensions of the furnace. Current and voltage are obtained from the heat necessary to remelt the ingot and the heat transfer in the crucible, is analysed because of it is the most critical element. It was selected too the equipment to registry temperatures and pressure in base of thermocouple characteristics. (Author)

  15. Design and development of a blood vessel localization system using a Nir viewer; Diseno y desarrollo de un sistema de localizacion de vasos sanguineos mediante Visor NIR

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez R, A.; Plascencia C, L. E.; Cordova F, T.; Padilla R, N., E-mail: angelicahr@fisica.ugto.mx [Universidad de Guanajuato, 37150 Leon, Guanajuato (Mexico)

    2017-10-15

    In addition to the multiple applications of ionizing radiation in clinical diagnosis there is the possibility of using another part of the electromagnetic spectrum such as near infrared (Nir). This paper presents the design and construction of a Nir Biosensor in a range between 800 and 900 nm, which allows the visualization of blood vessels for the venepuncture procedure with the aim of reducing the trauma of venous access to patients of all ages. The possibility that the device is used in the location of venous ulcers as an alternative to veno grams obtained by X-rays is also explored. (Author)

  16. Design and construction of the SIPPING for fuels of the TRIGA Mark III reactor; Diseno y construccion del SIPPING para combustibles del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda J, G.; Delfin L, A.; Alvarado P, R.; Mazon R, R.; Ortega V, B. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx

    2003-07-01

    The sipping technique, it has been used by several possessors of nuclear research reactors in its irradiated nuclear fuels, likewise in some fuel storage sites, with the objective of to determine the quantity of radioactivity that the fuel liberates in the means in that it is. The irradiated fuel in storage of some nuclear research reactors, its can have cracks that cross the cladding of the same one, generating the liberation of fission products that its need to determine to maintain safety measures appropriate as much as the fuel as of the facilities where they are. It doesn't exist until now, some method published for the non destructive sipping test technique. Based on that described, the Reactor Department of the National Institute of Nuclear Research, it has designed and built an inspection system of irradiated fuel that it will allow the detection of gassy fission products in site, and solids by means of the measurement of the activity of the Cs-137 contained in water samples. (Author)

  17. Design and construction of a system to determine Radon-222 through alpha spectroscopy; Diseno y construccion de un sistema para determinar Radon-222 mediante espectroscopia alfa

    Energy Technology Data Exchange (ETDEWEB)

    Bonifacio M, J [Universidad Autonoma del Estado de Mexico. Facultad de Quimica. Toluca (Mexico)

    1992-12-31

    The purpose of this work consists in the design a radon-222 gas measurement system utilizing a surface barrier detector with the objective to obtain a more accurate measurement for this isotope through an alpha particle spectrum and so to address as to avoid the activity influence of the descendants of short half-life, which are too beta particles emitters, already other methods it must be correction series to obtain the real value of radon activity. Here are presented the general properties properties of radon, the experimental part description indicating the design to measure the radon-222 gas and its parts, as well as too the standard separation of radium-226 starting from carnotite mineral. Finally, it is presented the results obtained with a discussion about it. (Author) results obtained with a discussion about it. (Author)

  18. Landform design conditions Runoff and erosion control on reclaimed areas; Diseno de la Morfologia y Red de Drenaje en la Restaurationes Mineras

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Landform construction in Utrillas coal field, where the MFUSA Company is operating, is based on the runoff sharing out, making up different hydrological catchment. Artificial slopes, flat platforms, and the dram age network, with channels and small ponds, compose reclaimed cathments, which are connected to the natural drainage network. The goal of the project is to set up some tools for Landform design, i. e. hydrological and erosion models. The models give a quantitative base for predicting the long-term stability of reclaimed catchments. Empirical values of the parameters have been obtained by measuring runoff and sediments rates at the slope and catchments level. Runoff is predicted by applying the Curve Number Method. RUSLE 1.06, Rusle for Mined Lands, Construction Sites and Reclaimed Lands, is applied for soil erosion prediction at slope scale and MUSLE at catchment scale. It is explained the methodology for applying these models in others coal fields. Finally rules for conservation and management of the reclaimed catchments are given, emphasizing the influence of the Mediterranean-Continental climate. (Author)

  19. Designing a reverse osmosis desalination plant, main parameters and compounds; Diseno de una planta desilinizadora de osmosis inversa, parametros y componentes principales

    Energy Technology Data Exchange (ETDEWEB)

    Arango Mesa, H. [Universidad del Valle. Cali. Colombia (Colombia); Gomez Gotor, A. [Universidad de las Palmas de Gran Canaria (Spain)

    1998-12-31

    This paper comments on some of the design features which should be taken into account in planning a reverse osmosis sea water desalination plant. It also examine the components of some of the plant`s main units, such as the high pressure pumping unit and energy recovering system and the types of membrane modules and their use. Finally, it compares that most common commercially available products. (Author) 6 refs.

  20. Optimized design of shields for diagnostic X rays with NCRP 147 technique; Diseno optimizado de blindajes para rayos X diagnostico con tecnica NCRP 147

    Energy Technology Data Exchange (ETDEWEB)

    Gama T, G. [Calidad XXI SA de CV, Zacatecas 67-007 Col. Roma, 06700 Mexico D.F. (Mexico)]. e-mail: cxxi@prodigy.net.mx

    2006-07-01

    A comparison among the design techniques of shielding for X-ray diagnostic rooms with the NCRP 49 (1976) report technique, AAPM 39 (1993) Y the one of the NCRP 147 (2005) technique. The designs correspond to a room of conventional X-rays, one of fluoroscopy, one of tomography Y one of mammography. In all the cases it demonstrates that the NCRP 49 technique overestimate the shieldings. The causes of the overestimation of the NCRP 49 can be attributed to: a) high values of the work charge that don't consider the spectral fluence of the photons that are present in each room, b) to the differences in the values of the kerma in air without attenuation for the dispersed primary radiation Y of leakage among both reports. (Author)

  1. Design aspects and conservation of roads in the saving of energy; Aspectos de diseno y conservacion de carreteras en el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Cajun, Carlos S.; Aguerrebere Salido, Roberto [Instituto Mexicano del Transporte, Queretaro (Mexico)

    1992-12-31

    In this paper the effects that on the fuel consumption the roads have for their slopes and roughness are presented. A mathematical model is presented which shows the relationship between the slope, the roughness coefficient and the required power to overcome the corresponding resistance; the former in order to predict the fuel consumption and therefore, the potential level of energy saving corresponding to this item. [Espanol] En este trabajo se presentan los efectos que sobre consumo de combustible se tienen, debido a las pendientes y rugosidades de las carreteras. Se presenta un modelo matematico que muestra la relacion entre la pendiente, el coeficiente de rodamiento y la potencia requerida para vencer las resistencias correspondientes; lo anterior con el fin de predecir el consumo de combustible y, por lo tanto, los niveles potenciales de ahorro de energia correspondientes a este rubro.

  2. A hybrid approach to solving the problem of design of nuclear fuel cells; Un enfoque hibrido para la solucion del problema del diseno de celdas de combustible nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Montes T, J. L.; Perusquia del C, R.; Ortiz S, J. J.; Castillo, A., E-mail: joseluis.montes@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    An approach to solving the problem of fuel cell design for BWR power reactor is presented. For this purpose the hybridization of a method based in heuristic knowledge rules called S15 and the advantages of a meta-heuristic method is proposed. The synergy of potentialities of both techniques allows finding solutions of more quality. The quality of each solution is obtained through a multi-objective function formed from the main cell parameters that are provided or obtained during the simulation with the CASMO-4 code. To evaluate this alternative of solution nuclear fuel cells of reference of nuclear power plant of Laguna Verde were used. The results show that in a systematic way the results improve when both methods are coupled. As a result of the hybridization process of the mentioned techniques an improvement is achieved in a range of 2% with regard to the achieved results in an independent way by the S15 method. (Author)

  3. Design of a heterogeneous subcritical nuclear reactor with molten salts based on thorium; Diseno de un reactor nuclear subcritico heterogeneo con sales fundidas a base de torio

    Energy Technology Data Exchange (ETDEWEB)

    Medina C, D.; Hernandez A, P.; Letechipia de L, C.; Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico); Sajo B, L., E-mail: dmedina_c@hotmail.com [Universidad Simon Bolivar, Laboratorio de Fisica Nuclear, Apdo. Postal 89000, Caracas 1080-A (Venezuela, Bolivarian Republic of)

    2015-09-15

    This paper presents the design of a heterogeneous subcritical nuclear reactor with molten salts based on thorium, with graphite moderator and a {sup 252}Cf source, whose dose levels at the periphery allows its use in teaching and research activities. The design was realized by the Monte Carlo method, where the geometry, dimensions and the fuel was varied in order to obtain the best design. The result was a cubic reactor of 110 cm of side, with graphite moderator and reflector. In the central part having 9 ducts of 3 cm in diameter, eight of them are 110 cm long, which were placed on the Y axis; the separation between each duct is 10 cm. The central duct has 60 cm in length and this contains the {sup 252}Cf source, also there are two irradiation channels and the other six contain a molten salt ({sup 7}LiF - BeF{sub 2} - ThF{sub 4} - UF{sub 4}) as fuel. For the design the k{sub eff} was calculated, neutron spectra and ambient dose equivalent. In the first instance the above was calculated for a virgin fuel, was called case 1; then a percentage of {sup 233}U was used and the percentage of Th was decreased and was called case 2. This with the purpose of comparing two different fuels operating within the reactor. For the two irradiation ducts three positions are used: center, back and front, in each duct in order to have different flows. (Author)

  4. Design of the magnetic system of an ECR type ion source; Diseno del sistema magnetico de una fuente de iones tipo ECR

    Energy Technology Data Exchange (ETDEWEB)

    Camps C, E.; Munoz C, A

    1990-05-15

    A computer program written with the purpose of studying the magnetic field produced by a linear system of n coils is shown. Based on this a four coils system is designed that was used in an ion source of Resonance Electron-cyclotron type (REC) that is sought to build. In turn, structure characteristics of the magnetic field proper for such purpose are discussed. (Author)

  5. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Spanish Edition); Seguridad de las centrales nucleares: Diseno. Requisitos de seguridad especificos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-04-15

    This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  6. Stability analysis criteria in landfill design based on the Spanish code; Criterios de estabilidad en el diseno de un vertedero, basado en la normativa espanola

    Energy Technology Data Exchange (ETDEWEB)

    Estaire Gepp, J.; Pardo de Santayana, F.

    2014-02-01

    The design of a landfill requires performing stability analyses. To perform such analyses it is necessary to define different design situations and their corresponding safety factors. Geo synthetics are normally used to construct the lining system of the landfills, causing critical slip surfaces to pass along one of the different geo synthetic interfaces. Determination of the shear strength of such critical interfaces is, therefore, an extremely important issue. In this paper, these aspects are analysed based on what is set in the Spanish codes and in the technical literature. As a result of the study, some tables are presented which relate the different design situations (normal, accidental or extraordinary) to the shear strength of the lining system to be used (peak or residual) and define the minimum factor of safety to be accomplished. (Author)

  7. Handbook for the design, construction and maintenance of mine haulage roads. Manual para el diseno, construccion y mantenimiento de pista mineras

    Energy Technology Data Exchange (ETDEWEB)

    Ayala Carcedo, F J; Ortiz, D U.F.P.; Lopez, J C; Rodriguez Ortiz, J M; Kraemer, H C; Val, M M.A.D.

    1986-01-01

    The publication gives some easy guide-lines for the design and execution of surface mine roads, and their auxiliary elements, within the technical possibilities and equipment normally available in mining operations. A methodology for the mining haulage is proposed, taking into consideration the geometric and functional conditions of the surface mine haulage road and the vehicles used. 25 refs., 58 figs., 31 tabs., 10 photos.

  8. Analysis of the design of an X-ray tube using Monte Carlo; Analisis del diseno de un tubo de rayos X mediante Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Pena V, J. D.; Sosa A, M. A.; Ceron, P. V.; Vallejo, M. A. [Universidad de Guanajuato, Division de Ciencias e Ingenierias, Loma del Bosque No. 103, Lomas del Campestre, 37150 Leon, Guanajuato (Mexico); Vega C, H. R., E-mail: jd.penavidal@ugto.mx [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas, Zac. (Mexico)

    2017-10-15

    In this paper we present the Monte Carlo analysis of the X-rays produced by a rotating X-ray tube of the Siemens brand that is used in tomographs for clinical use. The work was done with the MCNP6 code with which the tube was modeled and the primary X-ray spectra produced during the interaction of monoenergetic electrons of 130 keV were calculated. The X-ray spectra were obtained by varying some parameters such as: the angle of the anode (15 to 20 degrees), the type of target (Tungsten, Molybdenum and Rhodium) and the thickness of the filter (3, 5, 10 and 15 mm). In order to have a good statistic 10{sup 7} stories were used. Though the estimators f2 and f5 the X-ray spectra and the total fluencies were estimated. This information will be used to calculate the dose absorbed in the lens and the thyroid gland in patients undergoing radio diagnosis procedures. (Author)

  9. Design of an anaerobic hybrid reactor for industrial wastewater treatment; Diseno de reactores hibridos anaerobios para el tratamiento de aguas residuales industriales

    Energy Technology Data Exchange (ETDEWEB)

    Soroa del Campo, S.; Lopetegui Garnika, J.; Almandoz Peraita, A.; Garcia de las Heras, J. L.

    2005-07-01

    The application of the European legislation has promoted different strategies aimed at minimizing the biological sludge production during wastewater treatment. Anaerobic biological treatment is the clearest choice from a technical and economical point of view regarding industrial wastewater. In this context, a semi-industrial anaerobic hybrid reactor has been developed as an alternative technology to other anaerobic systems well-established in the market for the treatment of slaughterhouse wastewater. The The results have demonstrated that it is an effective, robust and easy to operate system. The sludge production has been reduced below 0.12 kg VS/kg COD removed, for COD removal efficiencies above 95%. (Author) 12 refs.

  10. Design and implementation of a system for controlling emission of radiation; Diseno e implementacion de un sistema para el control de emision de radiacion

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Alfaro, Luis Diego

    2012-07-01

    The Centro de Investigacion en Ciencias Atomicas, Nucleares y Moleculares of the Universidad de Costa Rica has seen the need to automate the process of changing filters, so that no person has to be exposed to the radiation emitted by the source, which can be very harmful to health. A graphical interface and a controller is implemented using the LabView software, to manipulate and detect the position of a rotating disk to a radiation source. The rotary disk is used in the Center by means of a microcontroller Arduino UNO and a stepper motor. An actuator and a stepper motor, controlled through signals sent by an Arduino UNO, have been defined and implemented in a first stage, by an integrated module of bridges H and an optical system to locate the position of the filters. The second stage has been the creation in parallel of a virtual instrument in LabView, with routines able to move the stepper motor shaft to a desired position, along with its graphical interface, adaptable to any stepper motor bipolar or unipolar, and simple to use. The program has been validated to verify proper operation, by a routine in which filters are chosen randomly and persons handling the program. The stages have been documented along with the user manual for proper use of virtual instrument and system assembly. (author) [Spanish] El Centro de Investigacion en Ciencias Atomicas, Nucleares y Moleculares de la Universidad de Costa Rica ha visto la necesidad de automatizar el proceso de cambio de filtros, de tal manera que ninguna persona tuviera que estar expuesta a la radiacion emitida por la fuente, que puede resultar muy danina para la salud. Una interfaz grafica y un controlador se ha implementado utilizando el software LabView, para manipular y detectar la posicion de un disco giratorio para una fuente de radiacion. El disco giratorio es utilizado en el Centro por medio de un microcontrolador Arduino UNO y un motor a pasos. Un actuador y un motor a pasos, controlados a traves de senales enviadas por un Arduino UNO, se han definido e implementado en una primer etapa; por medio de un modulo integrado de puentes H, y un sistema optico para ubicar la posicion de los filtros. La segunda etapa ha sido la creacion en paralelo de un instrumento virtual en LabView, con rutinas capaces de hacer mover el eje del motor a pasos a una posicion deseada, junto con su interfaz grafica, adaptable a cualquier motor a pasos bipolar o unipolar, y sencillo de utilizar. El programa se ha validado para comprobar su correcto funcionamiento, mediante una rutina en la cual se eligen filtros al azar y con personas que manipulen el programa. Las etapas se han documentado junto con el manual de usuario para un correcto uso del instrumento virtual y ensamblaje del sistema. (autor)

  11. Design and energetical feasibility study of a refrigerated trailer with photovoltaic solar energy; Diseno y estudio de viabilidad energetica de un trailer refrigerado mediante energia solar fotovoltaica

    Energy Technology Data Exchange (ETDEWEB)

    Callen, S.; Ibanez, M.; Cabeza, L. F.

    2004-07-01

    In this study we have tried to show the energetic viability and the design of a refrigerated trailer, in which it has changed the traditional oil generator from the refrigeration system to a photovoltaic generator. Due to restrictions of design limited by trailer dimensions and the horizontal positions of modules, as one of the first conclusion has been necessary to reduce the refrigeration charge, to obtain the necessary energy savings to have technical viability of the project. The propositions to get the energy savings are to improve the thermal insulation of the trailer and to limit the kind and amount of products to transport. Finally, to apply the technology of solar refrigeration in the cooling unit of the trailer to optimise its performance. (Author)

  12. A design of Biological Network in the Basin of Jucar; El diseno de la Red Biologica en la Cuenca del Jucar

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Mas, J F; Correcher Martinez, E; Pinon, A; Martinez Muro, M A; Pujante Mora, A M

    2002-07-01

    In this study results obtained in the design of the Biological Network carried out during the year 2000 in 221 sampling points in 106 rivers of the environment of the Confederation Hidrografica of the Jucar are presented. The Biological network is based in the analysis of hydro morphological physical, chemical and biological parameters (macro invertebrates, diatoms, macrofits and fishes) that allow to know the ecological status of the studied rivers. The quality of the rivers were stablished with BMWP index and completed with the calculation in some selected sampling sites of other indexes: 1CG, macrofits index (IM), diatoms index (ID), ecotrofic index (IE). The results indicate the division of the study area in three big groups: the sampling sites located in the headwaters and small streams, with an excellent conservation state and with the presence of indicative species, the medium upland river sites which are regulated by reservoirs and dams, and the lowland rivers with the biggest accumulation of contamination and the biggest population density. (Author) 13 refs.

  13. Basic design criteria for an impact test frame for safety glazing; Criterios basicos de diseno de banco de ensayos para impactos de vidrios de seguridad

    Energy Technology Data Exchange (ETDEWEB)

    Postigo, S.; Pacios, A.; Huerta, C.

    2011-07-01

    The Spanish Building Code establishes the essential requirements of safety and habitability that buildings must satisfy. The Basic Document of Safety in Use and Accessibility identifies some critical areas where falling through brittle elements may cause a risk to the user. The document also establishes the minimum performance of glasses located in such areas, according to the impact procedure described in UNE-EN 12600:2003. However, this standard does not provide detailed information about the characteristics of the test equipment, but indicates a final calibration as validation test. The general criteria and conditions of this calibration are also incorporated in the UNE-EN 12600. To better achieve a successful manufacture of a pendulum complying with calibration limits, a proposal of the basic design criteria of a test frame for impacts of safety glazing is presented in this paper. Prototypes and results have been evaluated using dynamic design criteria of the impact phenomenon. Three criteria proposed and applied in the design and manufacture of a real test frame have helped to achieve the calibration required by the UNE-EN 12600:2003. The repeatability and reproducibility of the tests presented in this paper also guaranty the robustness of the set-up. (Author)

  14. Design of the ME-I powder mixer. Report of the design and construction of the powder mixer, according to the safety requisites of the pellets fabrication process; Diseno de mezclador de polvo ME-I. Reporte del diseno y construccion del mezclador de polvos, de acuerdo a los requisitos de seguridad del proceso de fabricacion de pastillas

    Energy Technology Data Exchange (ETDEWEB)

    Mariano H, E

    1991-03-15

    In order to fulfill the requirements of preparation of powder of UO{sub 2}; according to procedure P-M-PP-01, rev. 0, for the process of production of pellets, it was designed and manufactured a powders mixer to incorporate the lubricant one (zinc stearate) to the powder of UO{sub 2}. This equipment allows to mix the powder of UO{sub 2} evenly with the one zinc stearate, without forming considerable quantities of fine of UO{sub 2}, besides a sure control for the operators of the process and an easy access to the mixer to inspect the mixture. (Author)

  15. La deuda del Ecuador con China y su influencia en el desarrollo económico : análisis de criterios eficientes de desacoplamiento económico-financiero internacional.

    OpenAIRE

    Encalada López, Yanella Trinidad

    2016-01-01

    La oferta de China a Ecuador involucra créditos para financiar grandes obras de infraestructura y de libre disponibilidad con cierta rapidez, entre ellas se encuentran la construcción de carreteras, programas de inversión multisectorial, la construcción de proyectos hidroeléctricos y minas que beneficiarían al país permitiéndole incluso en un futuro vender energía eléctrica al extranjero como aporte a la diversificación y mejoramiento de sectores. La investigación se enfoca en det...

  16. Technological roadmap for production, clean and efficient use of Brazilian mineral coal: 2012 to 2035; Roadmap tecnologico para producao, uso limpo e eficiente do carvao mineral nacional: 2012 a 2035

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Brazil has one of the largest coal reserves in the world, but it is not among the largest producers in the world. Coal in Brazil, has two main applications: use as fuel for power generation, including industrial energy use, and in the iron and steel industry for production of coke, pig iron and steel. In the updated rates of use, the coal reserves can provide coal for more than 500 years. A public policy to better take advantage of the mineral coal, with horizons in 2022 and 2035 and the guidelines and strategies proposed for the country to reach the production, clean and efficient use of the expressive quantity of the mineral national coal are presented.

  17. Desarrollo de un sistema agronómico para la gestión eficiente de la energía en instalaciones de aire comprimido de industrias agroalimentarias

    OpenAIRE

    Castellano Reverte, Alvaro

    2013-01-01

    Los objetivos de este proyecto son el estudio de las instalaciones de aire comprimido en la industria agroalimentaria española, el estudio de las distintas tecnologías para conseguir una mayor eficiencia en las instalaciones de aire comprimido y el desarrollo de un software que permita el control automático e instantáneo de una instalación de aire comprimido en una empresa agroalimentaria. El software será desarrollado en el programa LabView y se presentará un ejemplo de simulación. Escuel...

  18. Using the reference curve of a water supply system for determining the optimal operation schedule; Utilizacion de la curva de consgina de un abastecimiento de agua para determinar el regimen de explotacion mas eficiente

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias Rey, P. L.; Martinez Solano, F. J.; Fuertes Miquel, V. S.; Lopez Patino, G.

    2007-07-01

    A new water inlet point in the network can modify the water supply schedule so that the distribution of flow to supply from the different points would be a problem to determine in each case. To present work uses the reference curve concept of a water supply system to propose a method that determines the appropriate distribution of water supplied using simulation models. The methodology is based on looking for the grater power efficiency in the system, assuming equal production costs in the different sources. The obtained conclusions allows to know some parameters that influence in the location of the optimal production system. At the same time, the analysis of two examples shows the reach of the propose methodology. (Author) 6 refs.

  19. The fuel cells: Truths on the generation of clean and efficient electricity electrochemical way; Las celdas de combustible: Verdades sobre la generacion de electricidad limpia y eficiente via electroquimica

    Energy Technology Data Exchange (ETDEWEB)

    Cano Castillo, Ulises [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In the search of alternative technologies for the generation of electrical energy, the Instituto de Investigaciones Electricas (IIE) has put special attention in a technology that promises to be key in the next years: The fuel cells, it is for this reason that in this article a review of this type of cells is presented, as well as its basic characteristics and benefits as a result of its use for the generation of electrical energy. [Spanish] En la busqueda de tecnologias alternativas de generacion de energia electrica, el Instituto de Investigaciones Electricas (IIE) ha puesto atencion especial en una tecnologia que promete ser clave en los proximos anos: Las celdas de combustible, es por ello que en este articulo se presenta una resena de este tipo de celdas, asi como sus caracteristicas principales y beneficios como resultado de su utilizacion para la generacion de energia electrica.

  20. Estratégia para uma gestão eficiente da água e resíduos na indústria. Estudo de uma indústria matalomecânica

    OpenAIRE

    Ferreira, Diogo Filipe Reis

    2014-01-01

    Mestrado em Engenharia do Ambiente - Instituto Superior de Agronomia The growing world population and industrial development has led to an increased pressure on natural resources. To control this situation, it was necessary to promote measures towards a more efficient use of resources. We all know the importance that water has in life, and therefore the concern with the management of this resource has increased. Legislative framework regarding industrial wastewater discharge became more...

  1. Estimated saving potential and efficient use of energy in air conditioning by means of the solar protection; Potencial estimado de ahorro y uso eficiente de energia en aires acondicionados mediante la proteccion solar

    Energy Technology Data Exchange (ETDEWEB)

    Mejia D, David; Morillon G, David; Rodriguez V, Luis [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2001-07-01

    In here it is presented the analysis of the impact of the solar gains through the transparent parts of a prototype house of social interest, located in a dry warm climate. This analysis was made to determine the gains through windows for the summer time and under the following conditions: without outside solar protections, with the use of eaves, solar breakers and finally with the use of both systems of solar protection. The results were compared to obtain the considered potential of energy saving in cooling equipment, that could be obtained in future houses to build. [Spanish] Se presenta el analisis del impacto de las ganancias solares a traves de las partes transparentes de un prototipo de vivienda de interes social, ubicado en un clima calido seco. Dicho analisis se realizo para determinar las ganancias a traves de ventanas para la epoca de verano y bajo las siguientes condiciones: sin protecciones solares exteriores, con el empleo de aleros, con quiebrasoles y finalmente con el empleo de ambos sistemas de proteccion solar. Se compararon los resultados para obtener el potencial estimado de ahorro de energia en equipo de enfriamiento, que se tendria en las futuras viviendas por construir.

  2. Seleção e caracterização de estirpes de Bacillus thuringiensis eficientes contra a Diatraea saccharalis (Lepidoptera: Crambidae Selection and characterization of Bacillus thuringiensis efficient strains against Diatraea saccharalis (Lepidoptera: Crambidae

    Directory of Open Access Journals (Sweden)

    Cristina Lima de Macedo

    2012-12-01

    Full Text Available O objetivo deste trabalho foi selecionar e caracterizar estirpes nativas de Bacillus thuringiensis tóxicas a Diatraea saccharalis (Lepidoptera: Crambidae. Cento e seis estirpes pertencentes ao Banco de Bactérias de Invertebrados, da Embrapa Recursos Genéticos e Biotecnologia, foram testadas quanto à toxicidade a D. saccharalis, e, as mais tóxicas, caracterizadas por métodos bioquímicos e moleculares. Das 106 estirpes testadas, 16 causaram 100% de mortalidade em 24 horas. As três estirpes mais tóxicas apresentaram concentração letal média entre 8 e 43 ng cm-2. O perfil proteico das 16 estirpes mostrou a presença de proteínas de 130 e 65 kDa, e a caracterização molecular mostrou a presença dos genes tipo cry1 e cry2: cry1Aa, cry1Ab, cry1Ac e cry2Aa. A concentração letal média de esporos e cristais obtidos a partir de estirpes recombinantes, que expressavam individualmente os genes cry1Aa, cry1Ab, cry1Ac e cry2Aa, variou entre 222 e 610 ng cm-2, valores muito superiores aos das estirpes nativas mais tóxicas, que apresentavam possibilidade de expressão simultânea desses genes. Este resultado é indicativo de que há sinergia entre as toxinas. Há interação entre as toxinas de B. thuringiensis e seus receptores na broca-do-colmo da cana-de-açúcar.The objective of this work was to select and characterize native strains of Bacillus thuringiensis toxic to Diatraea saccharalis (Lepidoptera: Crambidae. A hundred-and-six strains, belonging to the bank of invertebrate bacteria (Brazil, of Embrapa Genetic Resources and Biotechnology, were tested as to their toxicity to D. saccharalis, and the most toxic ones were characterized by biochemical and molecular methods. Out of the 106 tested strains, 16 caused 100% mortality within 24 hours. The three most toxic strains showed median lethal concentrations between 8 and 43 ng cm-2. The protein profile of the 16 strains showed the presence of 130 and 65 kDa proteins, and the molecular characterization showed the presence of cry1and cry2 type genes: cry1Aa, cry1Ab, cry1Ac, and cry2Aa. The median lethal concentration of spores and crystals obtained from recombinant strains, which individually expressed the genes cry1Aa, cry1Ab, cry1Ac, and cry2Aa, varied between 222 and 610 ng cm-2, values much higher than the ones of the most toxic native strains, which have the possibility of simultaneously expressing these genes. This result indicates a synergy between the toxins. There are interactions between B. thuringiensis toxins and their receptors in the sugarcane borer.

  3. Manejo estratégico de la producción de residuos estériles de minería sustentable, utilizando prácticas mineras eco-eficientes en Colombia

    Directory of Open Access Journals (Sweden)

    Efraín Casadiego Quintero

    2017-09-01

    Full Text Available La minería es considerada una de las actividades económicas que más produce contaminación a las fuentes hídricas y suelos,  además de ser la explotación de un recurso finito en el cual se generan residuos estériles que terminan como escombros o vertidos en ríos. La responsabilidad y conciencia que han tomado las empresas y universidades sobre los daños causados ha hecho que se innove e invierta en tecnología que mejore la extracción y genere un sistema donde se pueda producir materiales sin usar químicos como cianuro y mercurio. En este artículo se presenta un trabajo realizado en la mina  “Sociedad Minera la Elsy en Vetas, Santander” en conjunto con un grupo de investigación para diseñar un sistema sustentable efectivo de extracción y se muestra el estudio realizado a los residuos estériles para utilizarlos como agregados para construcción

  4. Laboratorul de cercetare şi încercări higrotermice, instrument de verificare experimentală a calităţii construcţiilor, echipamentelor şi gestionării eficiente a energiei

    Directory of Open Access Journals (Sweden)

    Constantin Bogos

    2010-09-01

    Full Text Available This paper seeks to present the technical conditions and the main types of research and experimental verifications being conducted by the Laboratory of Research and Hygrothermal Testing for Materials, Building Elements and Parts at INCD URBAN-INCERC Iasi Branch. Another purpose of this paper is to describe the subjects of the research work done by the group of researchers within the Laboratory over the past 15 years. The main research papers, tests, expert studies, studies on the behavior of in-use buildings may be grouped in the following categories: verification of the quality of new products, products for the hygrothermal conservation and rehabilitation, for materials, elements, closing systems used in constructions and installations; homologation of the new building solutions or hygrothermal rehabilitation existing solutions; identification of the stationary regime specific thermal and physical parameters – resistance to thermal transfer, the condensation risk, the temperature range at the surface of closing elements, the global thermal transfer coefficient; determination of the behavior in case of water vapor diffusion; the accumulation of dew within the structure; determination of the behavior of thermally difficult areas: decks, joining areas, studs, areas with clamps, sashes, lintels etc; experimental determination of the behavior of non-stationary thermal regime closing elements – thermal inertia index, damping and dephasing of the thermal wave, phase displacement; technical agrementation of products, and climatic qualification of industrial equipments, under extreme climatic conditions.

  5. Custos operacionais eficientes das distribuidoras de energia elétrica: um estudo comparativo dos modelos DEA e SFA The cost efficiency of the Brazilian electricity distribution utilities: a comparative study with DEA and SFA models

    Directory of Open Access Journals (Sweden)

    Marcus Vinicius Pereira de Souza

    2010-12-01

    Full Text Available Este artigo apresenta medidas de eficiência para 40 distribuidoras de energia elétrica que operam no setor elétrico brasileiro. As medidas foram obtidas por modelos de análise envoltória de dados (DEA e modelos de fronteira estocástica (SFA, duas técnicas que podem mitigar a assimetria de informação e aprimorar a habilidade do agente regulador comparar os desempenhos das distribuidoras, requisitos fundamentais em esquemas de regulação incentivada. As duas abordagens são apresentadas e os resultados obtidos pelos diferentes modelos são comparados.This paper shows the efficiency measurements of 40 Brazilian electricity distribution companies. The efficiency scores are obtained using the data envelopment analysis (DEA and stochastic frontier analysis (SFA models, techniques that can reduce the information asymmetry and improve the regulator skills to compare the performance of the electricity companies, which are fundamental aspects of regulatory regimes. The two approaches are described, and the main results obtained from the different models are compared.

  6. Identificación de factores que contribuyen al desarrollo de actividades de enseñanza y aprendizaje con apoyo de las TIC, que resulten eficientes y eficaces. Análisis de su presencia en tres centros docentes

    OpenAIRE

    Canales Reyes, Roberto

    2007-01-01

    Consultable des del TDX Títol obtingut de la portada digitalitzada La investigación se sitúa en una perspectiva metodológica de investigación interpretativa. Cuyo diseño es de tipo estudio de casos, a partir del cual el enfoque de la recolección y análisis de datos se ha definido como mixto, de carácter cuasi-etnográfico, en el que se integran diversas técnicas cualitativas y cuantitativas. Los objetivos del estudio son: General: Identificar factores que facilitan el desarrollo de buena...

  7. Powderspec, a program for the efficient simulation of spectra of electron paramagnetic resonance of powders with orthorhombic symmetry; Powderspec, un programa para la simulacion eficiente de espectros de resonancia paramagnetica electronica de polvos con simetria ortorrombica

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez T, L.; Beltran L, V

    1991-09-15

    In this report a FORTRAN source program which simulates the second order powder pattern and spectrum of electron paramagnetic resonance (EPR) in crystal fields with orthorhombic symmetry using Gauss-Legendre quadratures is given. Also the commentaries which describe each step in detail are presented. (Author)

  8. Sistema energéticamente eficiente y de bajo costo para controlar la temperatura y aumentar el oxígeno en estanques de cultivo de alevines de tilapia roja

    Directory of Open Access Journals (Sweden)

    Rubén Darío Vásquez-Salazar

    2014-01-01

    Full Text Available El artículo expone un sistema automático para controlar la temperatura y aumentar el oxígeno en estanques de cultivo de alevines de tilapia roja en la granja John Jairo González, del Politécnico Colombiano Jaime Isaza Cadavid. El control se realiza a través de un PLC que recibe dos señales de temperatura ubicadas en puntos diferentes del estanque, y una señal de un sensor de nivel. Ejecutando un algoritmo de control, activa o desactiva diferentes circuitos de agua fría, proveniente de la quebrada Guaracú, o caliente, a través de un proceso de bombeo de agua del estanque hacia los colectores solares, y regresándola al estanque, recirculación que se hace hasta obtener una temperatura de 29 °C, un poco por encima de la ideal de 28 °C. El sistema de control es validado comparando temperatura y oxígeno con un tanque sin control. 

  9. La administración del talento humano eficiente y eficaz del Registro Civil para la satisfacción de necesidades del cliente interno y externo, optimizando el desarrollo sostenible del Ecuador.

    OpenAIRE

    Vásconez P., Fernando

    2002-01-01

    Hasta hace muy pocos años las leyes que gobernaban el progreso personal en el mundo del trabajo estaban casi únicamente circunscritas al amiguismo, el nepotismo y el favoritismo por un lado y, al historial académico (y a la experiencia) del empleado por el otro. De hecho, cuanto más quería crecer una empresa, más importancia concedía a los estudios y a la formación básica de sus empleados, y menos a los nexos personales con la dirección. Pero en nuestro competitivo mundo actual, este...

  10. Avaliação de Metas de produção eficientes e compatíveis com fatores ergonômicos de trabalhadores de silvicultura

    OpenAIRE

    Marzano, Felipe Leitão da Cunha

    2013-01-01

    O crescimento do setor florestal no Brasil e no mundo torna necessário o aperfeiçoamento das técnicas utilizadas nas operações de silvicultura e colheita florestal. As metas de produção sempre foram determinadas com base em estudos de tempo e produtividade, no entanto as variáveis ergonômicas devem ser incluídas neste processo. O objetivo deste trabalho foi realizar uma análise ergonômica das atividades de alinhamento e marcação, coveamento semimecanizado e plantio e determinar metas de produ...

  11. Vibração transversal: um método eficiente para classificação de peças estruturais de madeira Transverse vibration: an efficient method for structural timber classification

    Directory of Open Access Journals (Sweden)

    Carlito Calil Júnior

    2003-08-01

    Full Text Available A classificação de peças estruturais de madeira é uma tendência mundial, mas ainda deficiente no Brasil. O uso de métodos não-destrutivos para classificação e, conseqüentemente, para racionalização do uso de madeira em estruturas, melhora a posição da madeira quando em competição com materiais estruturais mais uniformes. Este trabalho mostra a existência de forte correlação linear entre o módulo de elasticidade estático e o módulo de elasticidade dinâmico, obtidos a partir de testes de flexão estática e de vibração transversal, em 326 peças estruturais de madeira da espécie Southern Pine, e indica a eficiência do método de vibração transversal para determinação do módulo de elasticidade e para classificação de peças estruturais de madeira.The classification of structural components of timber is a worldwide tendency but is still deficient in Brazil. The application of nondestructive methods for classification and consequently, optimization of the use of timber in structures improves the position of the timber in comparison to more uniform structural materials. This work shows the existence of high linear correlation between the static elasticity modulus and the dynamic elasticity modulus, obtained from flexion static test and from transverse vibration test, in 326 structural pieces of Southern Pine specie, and indicates the efficiency of the transverse vibration test for elasticity modulus determination and for classification of structural pieces of timber.

  12. Application of digital solutions to help the safe and efficient operation of nuclear power plants; Aplicacion de soluciones digitales para la ayuda a la operacion segura y eficiente de las centrales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Ortega P, F.; Fernandez F, S., E-mail: fortega@tecnatom.es [Tecnatom S. A., Av. Montes de Oca 1, 28703 San Sebastian de los Reyes, Madrid (Spain)

    2017-09-15

    In the search for excellence, the emergence of solutions to digitize nuclear power plants is an opportunity to optimize the operation and safety of them. The new technologies available today in the market, applied under a global vision of the operation, can contribute to the excellent operation of nuclear power plants in terms of efficiency and effectiveness. Tecnatom has a long experience in various areas related to the operation of the plants, giving the aforementioned global vision, essential to develop global solutions that pursue the safe and efficient operation of the operation. (Author)

  13. Efficient use of energy: from the regulatory incentives to the present energy efficiency law; Uso eficiente da energia: dos incentivos regulatorios recentes ate a atual lei de eficiencia energetica

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, Jamil [Escola Federal de Engenharia de Itajuba, MG (Brazil). Inst. de Engenharia Eletrica]. E-mail: jamil@iee.efei.br

    2002-07-01

    This paper presents the most recent regulatory milestones related to the energetic efficiency up to the approval of the 10,295 Regulation, as of October 17, 2001, establishing the maximum level of energy specific consumption, or minimum of energy efficiency, of energy consumers machines and devices manufactured or commercialized in Brazil.

  14. Isolamento de clones com atividade lipolítica do metagenoma de solo contaminado com gordura animal e caracterização de uma nova e eficiente lipase

    OpenAIRE

    Glogauer, Arnaldo

    2012-01-01

    Resumo: Um gene de uma nova lipase foi identificado a partir de uma biblioteca metagenomica de 500.000 clones construida com a fracao majoritariamente procariotica do DNA de um solo contaminado com gordura animal, proveniente de uma estacao de tratamento de efluentes. Na triagem inicial feita em agar contendo 1% de tributirina, 2661 dos 500.000 clones da biblioteca metagenomica apresentaram atividade. Destes, 127 apresentaram atividade em agar contendo 1% de tricaprilina, enquanto que 32 se m...

  15. Solar desalination System of Sea Water for Efficient Irrigation of a Crop Module; Sistema de desalacion solar de agua de mar para riego eficiente en un modulo de cultivo

    Energy Technology Data Exchange (ETDEWEB)

    Porta Gandara, Miguel Angel; Rubio Cerda, Eduardo; Fernandez Zayas, Jose Luis [Centro de Investigaciones Biologicas del Noreste (Mexico)

    2002-06-01

    The lack of vegetables in the diet of people living by the seaside in Mexican California results in important health problems. It is not easy to produce vegetable due to the lack of potable water. In order to solve this problem, this paper introduces a household agricultural production system utilizing seawater, which is distilled by means of a shallow solar still. The still has a free surface of 10 m{sup 2} and can yield an average daily quantity of 5/m{sup 2} daily. Distilled water is employed to grow vegetable (basically radishes, pumpkins and tomatoes) in an experimental plot of land where a highly efficient irrigation is pursued. Hence, it is possible to obtain biomass production of about 1 kg of fresh product for every 19 to 200 liters of distilled water, depending on the crop, in also variable crop cycles, between 30 and 150 days of duration. This paper ends with an economic evaluation and the assessment of water use. In comparison with the irrigation district of the valley of Santo Domingo, B. C. S., where extreme lack of water is felt, water is used in the latter in a proportion of between 180 and 500 times more than the strictly indispensable per unit product. [Spanish] La carencia de verduras en la dieta de los habitantes del litoral californiano produce graves problemas de salud, pero no es facil producir hortaliza, dada la carencia de agua potable. Con el fin de subsanar esta deficiencia, se presenta un sistema para producir alimentos a escala unifamiliar, usando agua de mar destilada mediante un destilador solar somero de 10 m{sup 2} de superficie, capaz de arrojar una produccion promedio de 5 l/m{sup 2} cada dia. El agua destilada se utiliza para producir hortalizas (primordialmente rabanos, calabazas y tomates) en una parcela experimental de alta eficiencia de empleo del agua, que permite obtener producto fresco del orden de 1 kg de rabanos por cada 10 litros de agua destilada en 30 dias, o 1 kg de tomate por cada 200 litros de agua en 150 dias. Tambien se ensaya con otros vegetales como calabaza, betabel y espinaca. Los ensayos aqui reportados no pueden extrapolarse facilmente a grandes extensiones, pero en comparacion con el distrito de riego del valle de Santo Domingo, Baja California Sur, Mexico, donde hay graves carencias del preciado liquido, resulta que se esta empleando entre 180 y 500 veces mas agua de la estrictamente indispensable por unidad de producto.

  16. LEARNIG TO BE INFORMED ON THE INTERNET: ¿ARE STUDENTS EFFECTIVE IN SEEKING AND SELECTING ONLINE INFORMATION? APRENDER A INFORMARSE EN LA RED: ¿SON LOS ESTUDIANTES EFICIENTES BUSCANDO Y SELECCIONANDO INFORMACIÓN?

    Directory of Open Access Journals (Sweden)

    María José Hernández Serrano

    2011-03-01

    Full Text Available From an educational perspective, taking the Internet as an informational resource for education, the article analyzes the scope of the new information skills in regard to the concepts of literacy and information competence. This brief description of skills leads to the question of how students perform in their searching and selecting practices with online information. The main conclusions abstracted from the recent author’s research are brought to debate in order to respond questions raised about the skills needed to being effective in accessing and managing online information. Finally, since the new ways to locate and operate with the information contributes to the reorganization of both the traditional models of teaching/learning and the roles of the educational stakeholders, we understand that preparing students to meet the informational demands requires of teachers as mediators or facilitators of the informational process; thus, in the final section of the article, a proposal for teaching strategies in searching and selecting online information is explored, by describing several useful activities.Desde una óptica educativa, tomando la Red como recurso de información para la educación, el artículo analiza qué suponen las nuevas habilidades informativas, en lo que respecta a los conceptos de alfabetización y competencia informacional. Esta breve descripción y recapitulación de habilidades nos lleva a preguntarnos, en la práctica, por cómo los estudiantes realizan los procesos de búsqueda y selección de información en línea. Traemos a debate las principales conclusiones abstraídas de los resultados de algunas de las investigaciones más relevantes de las autoras, que dan respuesta a los interrogantes planteados en torno a las habilidades necesarias para acceder y manejar eficazmente la información digital. Finalmente, y puesto que los nuevos modos para localizar y operar con la información precisan reorganizaciones tanto de los modelos tradicionales de enseñanza y aprendizaje, como de los roles y funciones de los diversos agentes educativos, entendemos que la preparación de los alumnos para responder a las distintas demandas informacionales requiere de los docentes un rol de mediador, de facilitador del proceso, exponiendo una propuesta concreta de estrategias de enseñanza de búsqueda y selección de información en la Red.

  17. Estimación del costo eficiente de reducción de pesticidas en cultivos de banano desarrollados en la provincia de El Oro, zonas: la ferroviaria y chaguana

    OpenAIRE

    Zambrano Monserrate, Manuel Andres; Herrera, Paul

    2009-01-01

    En la actualidad existe un gran abuso y manipulación inadecuada de los pesticidas por parte de nuestros agricultores bananeros, ya sean porque emplean una dosis menor de la requerida para ahorrar costos, sin saber que esto a largo plazo le ocasiona mas perdidas que si empleara las dosis correctas, porque crea una resistencia de la plaga. Por otro lado hay agricultores que emplean una sobredosis de los mismos, pensando que de esta manera las plagas desaparecerían más rápido, sin saber que ...

  18. The House of Discovery: the diffusion of energy efficient use through a Science Museum; A Casa da Descoberta: a difusao do uso eficiente de energia via um Museu de Ciencia

    Energy Technology Data Exchange (ETDEWEB)

    Lomardo, L.L.B.; Rosa, C.C. de A.; Trindade, G.L. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Escola de Arquitetura e Urbanismo]. E-mail: lovin@cruiser.com.br; carlarosa.arq@gmail.com; linusgt@gmail.com; Luz, D.M. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Fisica]. E-mail: daisy@if.uff.br

    2006-07-01

    This paper demonstrates through experiments, mock-ups, and the construction of Discovery House Head quarter, that in a bio climatic building, allied to suitable materials and proper technologies it is possible to rising the comfort levels and also reduce the energy waste. The paper also presents the used techniques and their evaluations.

  19. A economia dos recursos hídricos: os desafios da alocação eficiente de um recurso (cada vez mais escasso Water resource economy: the challenge of efficiently allocating a(n increasingly sparse resource

    Directory of Open Access Journals (Sweden)

    Antonio Eduardo Lanna

    2008-01-01

    Full Text Available O artigo apresenta e analisa os cenários prospectivos de recursos hídricos com base nos quais foram estabelecidas as diretrizes, as metas e os programas do Plano Nacional de Recursos Hídricos (PNRH. Em razão das informações, são analisadas as perspectivas futuras dos quatro setores usuários de água com maiores dinâmicas e possibilidades de conflito: agricultura irrigada, geração de energia, navegação e saneamento básico. Uma questão que não pode ser desconsiderada é a das mudanças climáticas e como poderão afetar as disponibilidades e os usos da água. Dessa análise, algumas conclusões e recomendações vão ser enunciadas, tendo por objetivo a antecipação do futuro e o preparo dos agentes públicos, privados e do terceiro setor para essa tarefa de promoção do uso racional da água, tendo em vista o desenvolvimento sustentável. Ou, como dizem economistas, de alocação ótima de um recurso escasso.This paper presents and analyzes water resource prospective scenarios from which the National Water Resources Plan has established its strategies, goals and programs. Based on these data the future tendencies for 4 water user sectors with greatest dynamic and conflict potential are analyzed: irrigated agriculture, energy generation, navigation and basic sanitation. Issues which cannot be ignored are the climate changes and how they can affect water supply and demands. From these analyses some conclusions and recommendations are proposed, aiming the anticipation of the future and to prepare public, private and third sector actors to promote rational use of water, focusing on the sustained development. Or, as economist used to say: the optimal allocation of a scarce resource.

  20. The Norm NOM-008-ENER-2001 offers an important saving option; La Norma NOM-008-ENER-2001 ofrece una importante opcion de ahorro

    Energy Technology Data Exchange (ETDEWEB)

    Lalana, Emiliano Ramiro [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)

    2006-01-15

    The Norm NOM-008-ENER-2001 no longer commands the efficient handling of energy from functional equipment or apparatuses but from a well planned architectural design that allows diminishing the energy use for cooling purposes, consequently this Norm refers to the conduction and radiation principles regulating the heat gain through the cover portions of a building. The Norm defines a reference theoretical building that will dictate the propitious heat gain for the projected buildings. Here the functioning logic of the Norm in respect to both principles is mathematically explained as well as an application example is developed considering the calculations made for the Norm's reference building and for the projected one, the final revision of the fulfillment of the norm, proposals of solutions and the conclusions. [Spanish] La Norma NOM-008-ENER-2001 comanda el manejo eficiente de energia electrica ya no a partir de equipos o aparatos funcionales sino a partir de un bien planeado diseno arquitectonico que permita disminuir el uso de energia para fines de enfriamiento. Por ende, esta norma se refiere a los principios de conduccion y radiacion regulando la ganancia de calor a traves de la envolvente y porciones de un edificio. La Norma define un edificio teorico de referencia que dictara la ganancia de calor propicia para los edificios proyectados. Aqui se explica matematicamente la logica de funcionamiento de la Norma respecto a ambos principios asi como se desarrolla un ejemplo de aplicacion que considera los calculos realizados para el edificio de referencia de la Norma y para el proyectado, la revision final del cumplimiento de la Norma, propuestas de solucion y conclusiones.

  1. SESSA: Expert system for the selection of air conditioning equipment; SESEAA: Sistema experto para la seleccion de equipos de aire acondicionado

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, Nicolas; Cardenas Perez, Edgar [Laboratorio de Sistemas Inteligentes, Centro de Instrumentos de la Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1998-12-31

    The problem of selecting air conditioning and refrigeration equipment is quite wide and complex, since it encompasses from the application of the basic principles of physics and of thermodynamics up to the classic engineering design problems; these in turn can be numberless since they vary from place to place depending on multiple factors such as the region geographic and economic conditions. On the other hand, account most be taken of several elements such as windows, walls, and its specific geographical orientation, roofs, floors, partitions, equipment, lighting, etc., all this exerts influence in the complexity that represents the selection process. This paper describes a useful informatics tool to make it easy the selection process in air conditioning installations, taking into account multiple saving and efficient use of energy criteria, reflected in the operation process of these installations. [Espanol] El problema de seleccion de sistemas de aire acondicionado y de refrigeracion es bastante amplio y complejo, ya que abarca desde la aplicacion de los principios basicos de la fisica y la termodinamica hasta los problemas clasicos de diseno de ingenieria; estos a la vez pueden ser innumerables ya que varian de un lugar a otro y de un proyecto a otro, dependiendo de multiples factores tales como las condiciones geograficas y economicas de la region. Por otra parte se deben tomar en cuenta diversos elementos como son: ventanas, muros y sus orientaciones especificas, techos, pisos, particiones, equipos, iluminacion, etc., todo esto influye en la complejidad que representa el proceso de seleccion. En el presente trabajo se describe una herramienta informatica para facilitar el proceso de seleccion de instalaciones de aire acondicionado, tomando en cuenta multiples criterios de ahorro y uso eficiente de energia que se reflejan durante el proceso de operacion de estas instalaciones.

  2. Technical-economic study of energy efficiency in offshore industrial electrical systems; Estudio tecnico economico de eficiencia energetica en sistemas electricos industriales costa afuera

    Energy Technology Data Exchange (ETDEWEB)

    Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2001-07-01

    In this work the methodology of analysis and the results obtained are presented in an technical-economic study for the application of power efficiency measures for a marine platform. The methodology is considered in the following steps: 1) Technical evaluation of the installation 2) Technical analyses of the optimization alternatives 3) Economic evaluation of the selected optimization alternatives graphs of the thermal regime of the variation with respect to the generation, variation of the efficiency with respect to the generation, efficiency curve of the motor and the designed curve of the pump are presented. A table of general reference parameters and another one of particular reference is given. Also a table of the economic evaluation when changing the electrical motor by one more efficient is presented. It is concluded that a potential of energy saving exists in their processes, generating an opportunity to perform a technical-economic feasibility study in these facilities. [Spanish] En este trabajo se presenta la metodologia de analisis y los resultados obtenidos en un estudio tecnico-economico para la aplicacion de medidas de eficiencia energetica para una plataforma marina. Se plantea la metodologia en los siguientes pasos: 1) Evaluacion tecnica de la instalacion 2) Analisis tecnico de las alternativas de optimizacion 3) Evaluacion economica de las alternativas de optimizacion seleccionadas. Se muestran graficas de la variacion del regimen termico respecto a la generacion, variacion de la eficiencia respecto a la generacion, curva de eficiencia del motor y curva de diseno de la bomba. Se da una tabla de parametros de referencia generales y otra de referencia particulares. Tambien se presenta una tabla de la evaluacion economica al cambiar el motor electrico por uno mas eficiente. Se concluye que existe un potencial de ahorro de energia en sus procesos, generando una oportunidad para realizar estudios de factibilidad tecnica economica en dichas instalaciones.

  3. SESSA: Expert system for the selection of air conditioning equipment; SESEAA: Sistema experto para la seleccion de equipos de aire acondicionado

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, Nicolas; Cardenas Perez, Edgar [Laboratorio de Sistemas Inteligentes, Centro de Instrumentos de la Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1999-12-31

    The problem of selecting air conditioning and refrigeration equipment is quite wide and complex, since it encompasses from the application of the basic principles of physics and of thermodynamics up to the classic engineering design problems; these in turn can be numberless since they vary from place to place depending on multiple factors such as the region geographic and economic conditions. On the other hand, account most be taken of several elements such as windows, walls, and its specific geographical orientation, roofs, floors, partitions, equipment, lighting, etc., all this exerts influence in the complexity that represents the selection process. This paper describes a useful informatics tool to make it easy the selection process in air conditioning installations, taking into account multiple saving and efficient use of energy criteria, reflected in the operation process of these installations. [Espanol] El problema de seleccion de sistemas de aire acondicionado y de refrigeracion es bastante amplio y complejo, ya que abarca desde la aplicacion de los principios basicos de la fisica y la termodinamica hasta los problemas clasicos de diseno de ingenieria; estos a la vez pueden ser innumerables ya que varian de un lugar a otro y de un proyecto a otro, dependiendo de multiples factores tales como las condiciones geograficas y economicas de la region. Por otra parte se deben tomar en cuenta diversos elementos como son: ventanas, muros y sus orientaciones especificas, techos, pisos, particiones, equipos, iluminacion, etc., todo esto influye en la complejidad que representa el proceso de seleccion. En el presente trabajo se describe una herramienta informatica para facilitar el proceso de seleccion de instalaciones de aire acondicionado, tomando en cuenta multiples criterios de ahorro y uso eficiente de energia que se reflejan durante el proceso de operacion de estas instalaciones.

  4. Efeito de práticas culturais na conversão e no balanço energéticos Effect of cultural practices on energy conversion and balance

    Directory of Open Access Journals (Sweden)

    Henrique Pereira dos Santos

    2007-01-01

    Full Text Available Desenvolveu-se de 1997 a 2003, em Passo Fundo (RS, um experimento constituído de quatro sistemas de manejo de solo (plantio direto, cultivo mínimo, preparo convencional de solo com arado de discos e preparo convencional de solo com arado de aivecas e de três sistemas de rotação de culturas: sistema I (trigo/soja; sistema II (trigo/soja e ervilhaca/milho ou sorgo e sistema III (trigo/soja, ervilhaca/milho ou sorgo e aveia branca/soja. O delineamento experimental foi o de blocos ao acaso, com parcelas subdivididas e três repetições. A parcela principal foi constituída pelos sistemas de manejo de solo, e as subparcelas, pelos sistemas de rotação de culturas. Neste trabalho, apresentam-se a conversão energética (energia disponível/energia consumida e o balanço energético (energia disponível - energia consumida no período de 7 anos. No sistema plantio direto houve conversão e balanço energéticos (72,44 e 190.766 MJ ha-1 superiores ao cultivo mínimo (64,06 e 167.349 MJ ha-1, aos preparos convencionais de solo com arado de discos (54,35 e 134.982 MJ ha-1 e com arado de aivecas (52,02 e 128.159 MJ ha-1 respectivamente. O trigo em rotação de culturas foi mais eficiente energeticamente do que a monocultura desse cereal. Na cultura de milho foi observada maior eficiência energética.The effects of soil management systems and crop rotations were assessed from 1997 to 2003, in Passo Fundo, Rio Grande do Sul State, Brazil. Four soil management systems (no-tillage, minimum tillage, conventional tillage using disk plow, and conventional tillage using moldboard plow and three crop rotation systems [system I (wheat/soybean, system II (wheat/soybean and common vetch/corn or sorghum, and system III (wheat/soybean, common vetch/corn or sorghum and white oats/soybean] were compared. An experimental design of blocks at random with split-plots and three replications was used. The main plot consisted of soil management systems, while the split

  5. Characterization of Magnetic Field Immersed Photomultipliers from Double Chooz Experiment. Design and Construction of their Magnetic Shields; Caracterizacion de los fotomultiplicadores del experimento Double Chooz bajo campo magnetico y diseno y construccion de sus blindajes magneticos

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia Valero, F. J.

    2007-12-28

    Flavour oscillations of neutrinos are a quantum-mechanical effect widely demonstrated. It is explained through interferences of their mass eigenstates, therefore, belonging to the physical area beyond the Standard Model. This work deals with the CIEMAT collaboration in the neutrino experiment Double Chooz. Such an experiment aims to measure the mixture angle {theta}{sub 1}3, one of the PMNS leptonic mixture matrix, with a un reached-before sensibility by decrease of systematic errors. For this, two identical scintillator detectors, equipped with PMT's, will be sited at different distances from two reactors located in the nuclear power plant CHOOZ B (France). The electronic neutrino flux from these reactors will be compared, explaining its deficit by flavour oscillations of these particles. The identity of both detectors will be diminished by the magnetic field effects on the PMT's response. Therefore, this study serves as for quantifying such an effects as for fitting the magnetic shields design that minimize them. Shielding measurements and final design of magnetic shields as much as the effect these ones cause in the PMT's response immersed in a monitored magnetic field are presented. (Author) 85 refs.

  6. Characterization of Magnetic Field Immersed Photomultipliers from Double Chooz Experiment. Design and Construction of their Magnetic Shields; Caracterizacion de los fotomultiplicadores del experimento Double Chooz bajo campo magnetico y diseno y construccion de sus blindajes magneticos

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia Valero, F J

    2007-12-28

    Flavour oscillations of neutrinos are a quantum-mechanical effect widely demonstrated. It is explained through interferences of their mass eigenstates, therefore, belonging to the physical area beyond the Standard Model. This work deals with the CIEMAT collaboration in the neutrino experiment Double Chooz. Such an experiment aims to measure the mixture angle {theta}{sub 1}3, one of the PMNS leptonic mixture matrix, with a un reached-before sensibility by decrease of systematic errors. For this, two identical scintillator detectors, equipped with PMT's, will be sited at different distances from two reactors located in the nuclear power plant CHOOZ B (France). The electronic neutrino flux from these reactors will be compared, explaining its deficit by flavour oscillations of these particles. The identity of both detectors will be diminished by the magnetic field effects on the PMT's response. Therefore, this study serves as for quantifying such an effects as for fitting the magnetic shields design that minimize them. Shielding measurements and final design of magnetic shields as much as the effect these ones cause in the PMT's response immersed in a monitored magnetic field are presented. (Author) 85 refs.

  7. Design of an equilibrium nucleus of a BWR type reactor based in a Thorium-Uranium fuel; Diseno de un nucleo de equilibrio de un reactor tipo BWR basado en un combustible de Torio-Uranio

    Energy Technology Data Exchange (ETDEWEB)

    Francois, J.L.; Nunez C, A. [Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Facultad de Ingenieria-UNAM, Paseo Cuauhnahuac 8532, Jiutepec, Morelos (Mexico)

    2003-07-01

    In this work the design of the reactor nucleus of boiling water using fuel of thorium-uranium is presented. Starting from an integral concept based in a type cover-seed assemble is carried out the design of an equilibrium reload for the nucleus of a reactor like that of the Laguna Verde Central and its are analyzed some of the main design variables like the cycle length, the reload fraction, the burnt fuel, the vacuum distribution, the generation of lineal heat, the margin of shutdown, as well as a first estimation of the fuel cost. The results show that it is feasible to obtain an equilibrium reload, comparable to those that are carried out in the Laguna Verde reactors, with a good behavior of those analyzed variables. The cost of the equilibrium reload designed with the thorium-uranium fuel is approximately 2% high that the uranium reload producing the same energy. It is concluded that it is convenient to include burnable poisons, type gadolinium, in the fuel with the end of improving the reload design, the fuel costs and the margin of shutdown. (Author)

  8. Design and building of a homemade sample changer for automation of the irradiation in neutron activation analysis technique; Diseno y construccion de un prototipo de intercambiador para la automatizacion de la tecnica de analisis por activacion neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Gago, Javier; Hernandez, Yuri; Baltuano, Oscar; Bedregal, Patricia [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Lima (Peru); Lopez, Yon [Universidad Nacional de Ingenieria, Lima (Peru); Urquizo, Rafael [Universidad Tecnologica del Peru, Lima (Peru)

    2014-07-01

    Because the RP-10 research reactor operates during weekends, it was necessary to design and build a sample changer for irradiation as part of the automation process of neutron activation analysis technique. The device is formed by an aluminum turntable disk which can accommodate 19 polyethylene capsules, containing samples to be sent using the pneumatic transfer system from the laboratory to the irradiation position. The system is operate by a control switchboard to send and return capsules in a variable preset time and by two different ways, allowing the determination of short, medium and long lived radionuclides. Also another mechanism is designed called 'exchange valve' for changing travel paths (pipelines) allowing the irradiated samples to be stored for a longer time in the reactor hall. The system design has allowed complete automation of this technique, enabling the irradiation of samples without the presence of an analyst. The design, construction and operation of the device is described and presented in this article. (authors).

  9. Adaptations to the perimeter environmental radiation monitoring network at the ININ (conceptual design of case); Adecuaciones a la red de monitoreo de radiacion ambiental perimetral del ININ (diseno conceptual de carcasa)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez P, M. A.

    2016-07-01

    At present, equipment for the detection of gamma radiation existing in the environment is being developed to protect the population in the Mexico country. The Instituto Nacional de Investigaciones Nucleares (ININ) implemented the gamma radiation monitoring probe (GRMP), which is an instrument used to measure the ionizing radiation in the environment and this in turn communicates with the National Network for Radiological Environmental Monitoring, which detects in real time the gamma radiation. The probes are located in strategic points in the different States of the Mexican Republic and due to their exposure to different types of climate, cause different damages to the case of the GRMP. Due to this situation is that this work is focused on performing different tests to maintain the case in order to validate the problems encountered and investigate new improvements for optimal operation. (Author)

  10. Advances in the development of the Mexican platform for analysis and design of nuclear reactors: AZTLAN Platform; Avances en el desarrollo de la plataforma mexicana para analisis y diseno de reactores nucleares: AZTLAN Platform

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, 07738 Ciudad de Mexico (Mexico); Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico); Espinosa P, G., E-mail: armando.gomez@inin.gob.mx [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico)

    2017-09-15

    The AZTLAN platform project: development of a Mexican platform for the analysis and design of nuclear reactors, financed by the SENER-CONACYT Energy Sustain ability Fund, was approved in early 2014 and formally began at the end of that year. It is a national project led by the Instituto Nacional de Investigaciones Nucleares (ININ) and with the collaboration of Instituto Politecnico Nacional (IPN), the Universidad Autonoma Metropolitana (UAM) and Universidad Nacional Autonoma de Mexico (UNAM) as part of the development team and with the participation of the Laguna Verde Nuclear Power Plant, the National Commission of Nuclear Safety and Safeguards, the Ministry of Energy and the Karlsruhe Institute of Technology (Kit, Germany) as part of the user group. The general objective of the project is to modernize, improve and integrate the neutronic, thermo-hydraulic and thermo-mechanical codes, developed in Mexican institutions, in an integrated platform, developed and maintained by Mexican experts for the benefit of Mexican institutions. Two years into the process, important steps have been taken that have consolidated the platform. The main results of these first two years have been presented in different national and international forums. In this congress, some of the most recent results that have been implemented in the platform codes are shown in more detail. The current status of the platform from a more executive view point is summarized in this paper. (Author)

  11. Computational model and performance optimization methodology of a compact design heat exchanger used as an IHX in HTGR; Modelo computacional y metodologia de optimizacion del funcionamiento de un intercambiador de calor de diseno compacto empleado como IHX en HTGR

    Energy Technology Data Exchange (ETDEWEB)

    De la Torre V, R.; Francois L, J. L., E-mail: delatorrevaldes@gmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, Circuito Exterior s/n, 04510 Ciudad de Mexico (Mexico)

    2017-09-15

    The intermediate heat exchangers (IHX) present in high-temperature gas-cooled reactor (HTGR) present complex operating conditions, characterized by temperature values higher than 1073 K. Conventional designs of tubes and shell have shown disadvantages with respect to compact designs. In this work, computational models of a compact heat exchanger design, the printed circuit, were built under IHX conditions in a HTGR installation. In these models, a detailed geometry was considered in three dimensions, corresponding to a transfer unit of the heat exchanger. Computational fluid dynamics techniques and finite element methods were used to study the thermo-hydraulic and mechanical functioning of the equipment, respectively. The properties of the materials were defined as temperature functions. The thermo-hydraulic results obtained were established as operating conditions in the structural calculations. A methodology was developed based on the analysis of capital and operating costs, which takes into account the heat transfer, pressure drop and the mechanical behavior of the structure, in a single optimization variable. By analyzing the experimental results of other authors, a relationship was obtained between the operation time of the equipment and the maximum effort in the structure, which was used in the model. The results show that the model that allows a greater thermal efficiency differs from the one that has lower total cost per year. (Author)

  12. Study, analysis and design of plasma torch for the elimination of hospital wastes in Chile; Estudio, analisis y diseno de antorcha de plasma para eliminacion de residuos hospitalarios en Chile

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Ramirez, Ximena Jesus

    2014-07-01

    Within the field of new technologies in industry, the use of plasma is notable for its high speed of expansion and development. Currently one of its uses is the elimination of waste as it allows to avoid problems such as the formation of airborne byproducts and hazardous solids that represent a serious problem for the environment and human health. Plasma, when it is at extreme temperatures above 3,000 Celsius, causes inorganic waste to disintegrate and to vitrify on a solid residue while organic waste is converted into gases. Unlike any other thermal treatment of waste (incineration, gasification, pyrolysis, etc.) and because it is not a combustion process, but atomization of matter, no pollutant emissions into the atmosphere (dioxins and similar) or ash, there are only simple gases and an inert solid completely vitrified that can be used in the construction, for the obtaining of urban furniture, as decorative element, for example. The project proposes to develop an experimental device, laboratory plasma torch, to investigate its application in the reduction of hospital waste. It is expected to model, design and construct an experimental device that produces a plasma jet, whose temperature is adequate to perform hospital waste treatments at the laboratory level. The main objective of the project is to contribute to the generation of knowledge in the field of hospital waste reduction through the use of technological applications of plasmas, generating the necessary research for the study of art and technological development at the experimental level in the indicated field.

  13. Improvements in the design of the engineered safeguards cooling water systems at Vandellos II nuclear power plant.; Mejoras del diseno de los sistemas de agua de refrigeracion de salvaguardias tecnologicas de la central nuclear Vandellos II

    Energy Technology Data Exchange (ETDEWEB)

    Barrado, M.

    2009-07-01

    The investigation performed following the essential services water system incident that occurred in 2004 underlined the need to improve the design and management of the plants cooling water systems, and the decision was taken to create a new system, known as EJ, which has recently entered service. The characteristics of this system are explained in this article. (Author)

  14. Aspects on modeled and the design of a system of refrigeration by absorption attended with solar energy; Aspectos sobre el modelado y diseno de un sistema de refrigeracion por absorcion asistido con energia solar

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Cascales, J. R.; Vera Garcia, F.; Cano Izquierdo, J. M.; Delgado Marin, J. P.; Martinez Sanchez, R.

    2008-07-01

    In this paper, we study the global modelling of an absorption system working with Br Li-H{sub 2}O. It satisfies the air-conditioning necessities of a classroom in an educational centre in Puerto Lumbreras. Murcia. This system utilises a set of solar collector to satisfy the thermal necessities of the vapour generator in the absorption system. For the dynamical simulation of the system we have used the TRNSYS software. The air-conditioned place has been modelled by using a TRNSYS module called PREBID. In this work, special attention is paid to the absorption equipment model developed by using neural networks which has been implemented in TRNSYS. The paper is closed drawing some conclusions. (Author)

  15. Design of a PET/CT facility considering the shielding calculation in accordance with AAPM TG-108; Diseno de una instalacion PET/CT considerando el calculo de blindaje segun AAPM TG-108

    Energy Technology Data Exchange (ETDEWEB)

    Guevara R, V. Y.; Romero C, N. [Empresa QC DOSE S. A. C., Av. Tomas Marsano 1915, Surquillo, Lima 34 (Peru); Berrocal T, M., E-mail: vguevara@qcdose.com [Universidad Nacional Mayor de San Marcos, C. German Amezaga 375, Edif. Jorge Basadre, Ciudad Universitaria, Lima 1 (Peru)

    2014-08-15

    A Positron Emission Tomography / Computed Tomography facility may require protection barriers on floor, ceiling and walls, because the patient becomes a radioactive source that emits photons of 0.511 MeV, after having received a radiopharmaceutical, usually F-18 fluorodeoxyglucose (F-18 FDG). This work has as objective to propose the design of a PET/CT facility, taking into account technical and radiation protection considerations applied internationally, and also develop the necessary shielding for such installation by applying as published by the American Association of Physicists in Medicine Task Group Report 108. A shielding spreadsheet in Excel program was developed with reference to the recommendations of the AAPM TG - 08, to determine the shielding required for the walls, floor and ceiling. For fixing the radiation levels in the shielding calculation has been considered the actual restrictions for the occupationally exposed personnel (100 μSv/week) as well as the people in general (20 μSv/ week). The radiopharmaceutical used as a reference for the shielding calculation was the F-18 FDG. With the assistance of an architectural plan were determined distances from potential sources of radiation in facility (uptake and image acquisition living rooms) to points of interest around them. Finally the thickness of the protective barriers in lead and concrete necessary to achieve the established radiation levels were calculated and these results were stored in a table. This paper shows that technical aspects considered in the design of the installation and environments distribution can improve work processes within the PET/CT facility, consequently resulting in a reduction of the dose levels for people in general. (author)

  16. Geographic information system(GIS) applications to optimize route selection, environmental analysis and power transmission line designs; Aplicaciones en sistemas de informacion geograficos (SIG) para optimizar seleccion de ruta, analisis ambiental y diseno de lineas de transmision

    Energy Technology Data Exchange (ETDEWEB)

    Cadena Suarez, Luis Fernando; Posada Delgado, Fabio Humberto; Alvarez Davila, Esteban; Gomez Colorado, Oscar Alberto [Interconexion Electrica S.A. (ISA), Medellin (Colombia)]. E-mail: fecadena@isa.com.co

    2001-07-01

    Interconexion Eletrica s.a. (ISA) is a company of the Colombian government for electric energy transportation through the national energy transportation network, it makes part of the companies group with growing environmental conscience. The better route identifications for high voltage transmission lines do not involve just the engineering analyses, but mainly the environmental one.These integrated analysis have been largely powered through the technology applications like Geographic Information Systems (GIS) and Remote Sensing (RS). These technologies were applied for a total of 300 kilometers between 1992 and 2000 in the largest power transmission lines whose configurations cross different geographic conditions. This current technical contribution describes the application of GIS and RS technologies for the best routes, environmental sensibility analysis and environmental impact evaluations. The applications have resulted in the integration between engineering and environmental processes, optimization of environmental evaluation, formulations of procedures handling and environmental control, as well as transmission line profile characteristics. After the project construction, GIS can be used as a useful tool for environmental monitoring in connection with power transmission lines, maintenance of servitude areas, availability conditions and quality of the high voltage transmission service.

  17. Respiratory monitor system for 4D CT image acquisition based on accelerometer. Design and implementation; Sistema de monitorizacion respiratoria para adquisicion de imagenes 4D de TC basado en un acelerometro. Diseno e implementacion

    Energy Technology Data Exchange (ETDEWEB)

    Llorente Manso, M.; Vivela Serrano, S.; Viera Jorge, J. C.; Garran del Rio, C.; Ferrer Gracia, C.; Carballo Gonzalez, N.

    2013-07-01

    The use of 4D CT images in Radiotherapy planning is increasing. Some commercial systems use abdominal movement to correlate images with respiratory phase. An in-house developed system based on an accelerometer to register patient's abdominal movement and a software to group 4D images in their corresponding respiratory phase is presented. A phantom test evaluates the capacity of the system to properly identify respiratory phases. A volunteers study compares breathing curves acquired by the accelerometer with those obtained using a commercial system. In the phantom images, maximum difference between real and calculated phase is 0.2 s. In the volunteer study, position of the curve maxima found by both systems differs, on average, around 2% (SD=2%) of the respiratory cycle period when volunteer's breathing is regular. Only when breathe is very irregular, differences of up to 10% in the phase assignment are found. (Author)

  18. Computer aided design (CAD) for electronics improvement of the nuclear channels of TRIGA Mark III reactor of the ININ; Diseno asistido por computadora (DAC) para mejorar la electronica de los canales nucleares del reactor TRIGA Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Rivero G, T.; Aguilar H, F. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: jlgm@nuclear.inin.mx

    2007-07-01

    The 4 neutron measurement channels of the digital control console (CCD) of the TRIGA Mark III reactor (RTMIII) of the ININ, its were designed and built with the corresponding Quality Guarantee program, being achieved the one licensing to replace the old console. With the time they were carried out some changes to improve and to not solve some problems detected in the tests, verification and validation, requiring to modify the circuits originally designed. In this work the corrective actions carried out to eliminate the Non Conformity generated by these problems, being mentioned the advantages of using modern tools, as the software applied to the Attended Engineering by Computer, and those obtained results are presented. (Author)

  19. Design of a mixed recharge with MOX assemblies of greater relation of moderation for a BWR reactor; Diseno de una recarga mixta con ensambles MOX de mayor relacion de moderacion para un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez S, J.R.; Alonso V, G.; Palacios H, J. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)]. e-mail: jrrs@nuclear.inin.mx

    2004-07-01

    The study of the fuel of mixed oxides of uranium and plutonium (MOX) it has been topic of investigation in many countries of the world and those are even discussed in many places the benefits of reprocessing the spent fuel to extract the plutonium created during the irradiation of the fuel in the nuclear power reactors. At the moment those reactors that have been loaded partially with MOX fuel, are mainly of the type PWR where a mature technology has been achieved in some countries like they are France, Belgium and England, however the experience with reactors of the type BWR is more limited and it is continued studying the best way to introduce this type of fuel in BWRs, one of the main problems to introduce MOX in reactors BWR is the neutronic design of the same one, existing different concepts to introduce the plutonium in the assemblies of fuel and one of them is the one of increasing the relationship of moderation of the assemble. In this work a MOX fuel assemble design is presented and the obtained results so far in the ININ. These results indicate that the investigated concept has some exploitable advantages in the use of the MOX fuel. (Author)

  20. Emergency lighting system for compliance with the IS-30 and further than the foundations of design events; Sistema de Alumbrado de Emergencia para cumplimiento con la IS-30 y sucesos mas alla de las bases de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Tejeda Sanchez, C.

    2014-07-01

    Autonomy and vulnerability to fire requirements of the emergency lighting systems, established in CSN instruction IS-30, and in commitments to deal with the consequences of events more beyond the bases of design, the design of a new lighting system required of emergency in the Almaraz Nuclear power plant. The design process consists of three phases: study of needs, definition of detailed design and requirements. During these phases is defined distribution and models luminaire lighting studies and specifications. Through the adaptation of the system to the needs of each area of the plant is It achieves compliance with the objectives defined by the CSN. (Author)

  1. Denitrogenation of purines in adsorption towers design and construction of treatment pilot plant; Desnitrogenacion de purines porcinos en torres de desorcion: diseno y construccion de una planta piloto de tratamiento

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo Barrio, M. D.; Alamo del Martin, J.; Irusta Mata, R.

    2002-07-01

    Nitrogen is the nutrient that generally limits the amount of manure that can be applied to the land in accordance with current regulatory requirements. This is the reason why nitrogen removal has tended to be a major focus in the development of agricultural wastes treatment procedures. In this study, a denitrogenation pilot-plant was designed and constructed in order to investigate air stripping as method for removing ammonia from liquid fraction of swine manure wastewaters. The high ammonia removal efficiency reached using the air stripping method indicates that it could provide an interim solution for current waste management problems in the swine industry. The developed technology is applicable to middle-size pig farms, thanks to the reduce cost of the necessary facilities and to the managing and maintenance facility of the equipment. (Author) 5 refs.

  2. Development of a simulator for design and test of power controllers in a TRIGA Mark III reactor; Desarrollo de un simulador para diseno y prueba de controladores de potencia en un reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Perez M, C.; Benitez R, J.S.; Lopez C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The development of a simulator that uses the Runge-Kutta-Fehlberg method to solve the model of the punctual kinetics of a nuclear research reactor type TRIGA. The simulator includes an algorithm of power control of the reactor based on the fuzzy logic, a friendly graphic interface which responds to the different user's petitions and that it shows numerical and graphically the results in real time. The user can modify the demanded power and to visualize the dynamic behavior of the one system. This simulator was developed in Visual Basic under an open architecture with which its will be prove different controllers for its analysis. (Author)

  3. Calculation of source term in spent PWR fuel assemblies for dry storage and shipping cask design; Calculo de los terminos fuente de combustibles irradiados PWR para el diseno de contenedores de almacenamiento y transporte

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, J L; Lopez, J

    1986-07-01

    Using the ORIGEN-2 Coda, the decay heat and neutron and photon sources for an irradiated PWR fuel element have been calculated. Also, parametric studies on the behaviour of the magnitudes with the burn-up, linear heat power and irradiation and cooling times were performed. Finally, a comparison between our results and other design calculations shows a good agreement and confirms the validity of the used method. (Author) 6 refs.

  4. Characterization of the rock salt for the design of underground storage in saline domes; Caracterizacion de la roca sal-gema para el diseno de almacenamientos en domos salinos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Meyenberg, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    The saline domes are natural geological formations, that have been formed in the underground, through the passage of millions of years. In Europe, they are used for hydrocarbon storage; for instance France is planning to increase, in a short term, its crude storing capacity in domes of 5 to 10 millions cubic meters (60 million of barrel), holding capacity. Additionally, studies are being conducted on the stability of this type of domes, for the storage of nuclear wastes during 100 thousand or 1 million years. [Espanol] Los domos salinos son formaciones geologicas estructurales naturales, que se han constituido en el subsuelo, en el transcurso de millones de anos. En Europa, se aprovechan para almacenar hidrocarburo; por ejemplo, Francia planea aumentar, a corto plazo, su capacidad de almacenamiento de crudo en domos de 5 a 10 millones de metros cubicos (60 millones de barriles). Ademas, se realizan estudios de estabilidad en este tipo de domos, para almacenar desechos nucleares durante 100 mil o 1 millon de anos.

  5. Design of Algorithms for their Use in the Control of Solutes Transport in Contaminated Aquifers; Diseno de algoritmos para su uso en el control del transporte de solutos en acuiferos contaminados

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Najera, Juan Diego [Comision Federal de Electricidad (Mexico)

    2002-06-01

    This paper establishes the theoretical foundations of a mathematical methodology to approach the rehabilitation of aquifers contaminated by dissolved substances, with the assistance of numerical techniques. The derived algorithms are of control or management type, since simultaneously to the predictive numerical solution of the solute transport equation, they determine those solutions that fulfil water quality restrictions. The controlling variable is the concentration of the polluting agent dissolved in the flow field. The considerations are kinematics because they take into account the advection and dispersion terms, but they also considerate the first order kinetic sorption model and the sources/sinks for the concentration. We describe the physical arguments and mathematical theory of subdiferentials necessary to establish the control problem of initial and boundary values for the solutes transport equation; afterwards, the primal variational model and the mixed of dual internal control as well as the formal discrete version of both formulations are obtained, so that solution algorithms of finite element semi discrete type are generated. Due to the hyperbolic-parabolic character of the transport equation, when the advective tem is dominant, in this work it is approximated by means of the lkeda's partial upwind technique. To prove the theory a hypothetical example is presented, and we analyze the two possible cases for the concentration of a polluting agent: when it dose not exceed and when it escapes the regulator limits of water quality. In both situations the primal and mixed algorithms determine the appropriate numerical solutions of each kind of problem. [Spanish] Este trabajo establece los fundamentos teoricos de una metodologia matematica para abordar la rehabilitacion de mantos acuiferos contaminados por sustancias disueltas, con la asistencia de tecnicas numericas. Los algoritmos que se derivan son de control o de manejo, ya que inmerso a la solucion numerica predictiva de la ecuacion de transporte de solutos, simultaneamente determinan aquellas que satisfaga restricciones impuestas por los limites de calidad del agua. La variable de control es la concentracion del contaminante disuelto en el campo del flujo. Las consideraciones son cinematicas, al incluir los terminos de adveccion y dispersion, pero tambien toman en cuenta las componentes de absorcion cinetica de primer orden y de fuente/sumidero para la concentracion. Se describen los argumentos fisicos y el marco matematico de subdiferenciales necesarios para establecer el problema de control de valores inicial y a la frontera para la ecuacion de transporte de solutos, luego se procede a obtener el modelo en variaciones primal y el mixto de control interno dual, asi como la version formal discreta de ambas formulaciones, con lo que se generan algoritmos de solucion de elemento finito de tipo semidiscreto. Debido al caracter hiperbolico-parabolico de la ecuacion de transporte, cuando el termino advectivo es dominante, en el trabajo se le aproxima con la tecnica de upwind parcial de lkeda. Se presenta un ejemplo hipotetico que permite probar la teoria; con el se analizan los dos casos posibles para la concentracion de un contaminante: cuando no excede y cuando rebasa los limites reguladores de calidad del agua. En ambas situaciones, los algoritmos primal y mixto determinan las soluciones numericas apropiadas de cada tipo de problema.

  6. Application of the New Propulsion Theory to the Design of Propellers. Comparison with the Lifting Line Theory (Aplicacion de la Nueva Teoria de la Impulsion al Diseno de Propulsores. Comparacion con la Teoria de las Lineas Sustentadoras),

    Science.gov (United States)

    1983-11-07

    obtained with the lifting line theory is very sensitive to the type of radial distribution law of circulation. In the past, especially for theoretical...I. Bacquerizo Briones, "Utilidad de la educacion de Poincare para el proyecto y analisis de propulsores con valores finitos de la circulacion en el

  7. Design of nuclear fuel cells by means of a statistical analysis and a sensibility study; Diseno de celdas de combustible nuclear mediante un analisis estadistico y un estudio de sensibilidad

    Energy Technology Data Exchange (ETDEWEB)

    Jauregui C, V. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas (Mexico); Castillo M, J. A.; Ortiz S, J. J.; Montes T, J. L.; Perusquia del C, R., E-mail: alejandro.castillo@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-10-15

    This work contains the results of the statistical analysis realized to study the nuclear fuel cells performance, considering the frequencies for the election of fuel bars used in the design of the same ones. The election of the bars used for the cells design are of 3 types, the first election shows that to the plotting the respective frequency is similar to a normal distribution, in the second case the frequencies graph is of type inverted square X{sup 2} and the last election is when the bars are chosen in aleatory form. The heuristic techniques used for the cells design were the neural networks, the ant colonies and a hybrid between the dispersed search and the trajectories re-linkage. To carry out the statistical analysis in the cells design were considered the local power peak factor and the neutron infinite multiplication factor (k∞) of this. On the other hand, the performance of the designed cells was analyzed when verifying the position of the bars containing gadolinium. The results show that is possible to design cells of nuclear fuel with a good performance, when considering the frequency of the bars used in their design. (Author)

  8. Design of a computation tool for neutron spectrometry and dosimetry through evolutionary neural networks; Diseno de una herramienta de computo para la espectrometria y dosimetria de neutrones por medio de redes neuronales evolutivas

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz R, J. M.; Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica, Av. Ramon Lopez Velarde No. 801, Col. Centro, Zacatecas (Mexico); Martinez B, M. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Av. Ramon Lopez Velarde No. 801, Col. Centro, Zacatecas (Mexico); Gallego, E. [Universidad Politecnica de Madrid, Departamento de Ingenieria Nuclear, Jose Gutierrez Abascal No. 2, E-28006 Madrid (Spain)], e-mail: morvymmyahoo@com.mx

    2009-10-15

    The neutron dosimetry is one of the most complicated tasks of radiation protection, due to it is a complex technique and highly dependent of neutron energy. One of the first devices used to perform neutron spectrometry is the system known as spectrometric system of Bonner spheres, that continuous being one of spectrometers most commonly used. This system has disadvantages such as: the components weight, the low resolution of spectrum, long and drawn out procedure for the spectra reconstruction, which require an expert user in system management, the need of use a reconstruction code as BUNKIE, SAND, etc., which are based on an iterative reconstruction algorithm and whose greatest inconvenience is that for the spectrum reconstruction, are needed to provide to system and initial spectrum as close as possible to the desired spectrum get. Consequently, researchers have mentioned the need to developed alternative measurement techniques to improve existing monitoring systems for workers. Among these alternative techniques have been reported several reconstruction procedures based on artificial intelligence techniques such as genetic algorithms, artificial neural networks and hybrid systems of evolutionary artificial neural networks using genetic algorithms. However, the use of these techniques in the nuclear science area is not free of problems, so it has been suggested that more research is conducted in such a way as to solve these disadvantages. Because they are emerging technologies, there are no tools for the results analysis, so in this paper we present first the design of a computation tool that allow to analyze the neutron spectra and equivalent doses, obtained through the hybrid technology of neural networks and genetic algorithms. This tool provides an user graphical environment, friendly, intuitive and easy of operate. The speed of program operation is high, executing the analysis in a few seconds, so it may storage and or print the obtained information for further analysis and treatment. (Author)

  9. Design and construction of an interface system for the extrapolation chamber from the beta secondary standard.; Diseno y construccion del sistema de interfaz para la camara de extrapolacion del patron secundario beta.

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez C, L F

    1995-10-01

    The Interface System for the Extrapolation Chamber (SICE) contains several devices handled by a personal computer (PC), it is able to get the required data to calculate the absorbed dose due to Beta radiation. The main functions of the system are: (a) Measures the ionization current or charge stored in the extrapolation chamber. (b) Adjusts the distance between the plates of the extrapolation chamber automatically. (c) Adjust the bias voltage of the extrapolation chamber automatically. (d) Acquires the data of the temperature, atmospheric pressure, relative humidity of the environment and the voltage applied between the plates of the extrapolation chamber. (e) Calculates the effective area of the plates of the extrapolation chamber and the real distance between them. (f) Stores all the obtained information in hard disk or diskette. A comparison between the desired distance and the distance in the dial of the extrapolation chamber, show us that the resolution of the system is of 20 {mu}m. The voltage can be changed between -399.9 V and +399.9 V with an error of less the 3% with a resolution of 0.1 V. These uncertainties are between the accepted limits to be used in the determination of the absolute absorbed dose due to beta radiation. (Author).

  10. Design of a homogeneous subcritical nuclear reactor based on thorium with a source of californium 252; Diseno de un reactor nuclear subcritico homogeneo a base de Torio con una fuente de Californio 252

    Energy Technology Data Exchange (ETDEWEB)

    Delgado H, C. E.; Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico); Sajo B, L., E-mail: ce_delgado89@hotmail.com [Universidad Simon Bolivar, Laboratorio de Fisica Nuclear, Apdo. 89000, 1080A Caracas (Venezuela, Bolivarian Republic of)

    2015-10-15

    Full text: One of the energy alternatives to fossil fuels which do not produce greenhouse gases is the nuclear energy. One of the drawbacks of this alternative is the generation of radioactive wastes of long half-life and its relation to the generation of nuclear materials to produce weapons of mass destruction. An option to these drawbacks of nuclear energy is to use Thorium as part of the nuclear fuel which it becomes in U{sup 233} when capturing neutrons, that is a fissile material. In this paper Monte Carlo methods were used to design a homogeneous subcritical reactor based on thorium. As neutron reflector graphite was used. The reactor core is homogeneous and is formed of 70% light water as moderator, 12% of enriched uranium UO{sub 2}(NO{sub 3}){sub 4} and 18% of thorium Th(NO{sub 3}){sub 4} as fuel. To start the nuclear fission chain reaction an isotopic source of californium 252 was used with an intensity of 4.6 x 10{sup 7} s{sup -1}. In the design the value of the effective multiplication factor, whose value turned out k{sub eff} <1 was calculated. Also, the neutron spectra at different distances from the source and the total fluence were calculated, as well as the values of the ambient dose equivalent in the periphery of the reactor. (Author)

  11. Operation and design of gas pipeline with cross geographical areas with big altitude changes: importance of the dynamic analysis; Diseno y operacion de gasoductos en zonas de elevadas diferencias altimetricas: importancia del analisis dinamico

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, Oscar [Transportadora de Gas del Norte S.A. (Argentina)

    2003-07-01

    The Natural Gas Demand has increased constantly in the last decades. It was mainly due to the discovery of enormous gas reserves, the opening of the energetic markets and its utilization as fuel for power generation The supply of new markets in Latin America has meant the development of several interconnection projects among countries. The development of projects crossing the Andes Mountains, with big altitude differences, impose new requirements for the design and pipeline operation The purpose of this paper is to continue the analysis of the gas pipeline modeling methods which cross geographical areas with big altitude changes, specifically under the dynamic point of view In these cases, the operating parameters are strongly linked to the analysis and comprehension of transient phenomenon and consequently an efficient line pack management. The demand suing is fundamental when systems crossing this kind of geographical areas are designed and operated The design should consider the response time, having capacity to support a demand variation. Finally the impact in the commercial operation of this phenomenon is analyzed, due to the possibility to detect idle capacity or optimize solutions, reducing investment and assurance an operation without risks. Thus in the design period , the capability of bringing a reliability service at a reduced cost is emphasized in benefit of the customers. (author)

  12. Methodology Einstein for energy audit and design of solar heat systems in industrial processes; Metodologia Einstein para auditoria energetica y diseno de sistemas de calor solar en procesos industriales

    Energy Technology Data Exchange (ETDEWEB)

    Schweiger, H.; Vannoni, C.; Danov, S.; Facci, E.

    2008-07-01

    Estimates show that 57% of the total industrial heat demand in EU countries is required at low (up to 100 degree centigrade) and medium temperature (up to 400 degree centigrade). An important part of this thermal energy demand can be covered by solar thermal energy. In the framework of the European project EINSTEIN (Expert-system for an Intelligent Supply of Thermal Energy in Industry), an expert system is being developed, where process optimisation, heat recovery, intelligent cold supply and renewable energy are integrated into a holistic energy audit methodology with the objective of reducing energy consumption in the industrial sector. EINSTEIN is being developed as a free and open source software project. (Author)

  13. Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems; Guia de procedimientos de diseno, construccion de prototipos, calibracion y operacion segura de sistemas de control nucleonico

    Energy Technology Data Exchange (ETDEWEB)

    Banados Perez, H [Instituto de Pesquizas Energia Nuclear, Sao Paulo (Brazil); Griffith Martinez, J [Instituto de Investigaciones de la Cana de Azucar, La Habana (Cuba); Desdin Garcia, L F [Centro de Estudios Aplicados al Desarrollo Nuclear, La Habana (Cuba); Rodriguez Cardona, R L [Agencia de Energia Nuclear, La Habana (Cuba); Molina, G [Instituto de Investigaciones Nucleares, Mexico City (Mexico); Sebastian Calvo, C [Instituto Peruano de Energia Nuclear, Lima (Peru)

    1999-09-24

    This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed.

  14. Qualification of the WIMS lattice code, for the design, operation and accident analysis of nuclear reactors; Calificacion del programa WIMS de calculo neutronico para diseno, seguimiento de operacion y analisis de accidentes de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Lerner, A M [Ente Nacional Regulador Nuclear, Buenos Aires (Argentina)

    1997-12-31

    A basic problem in nuclear reactor physics in that of the description of the neutron population behaviour in the multiplicative medium of a nuclear fuel. Due to the magnitude of the physical problem involved and the present degree of technological evolution regarding computing resources, of increasing complexity and possibilities, the calculation programs or codes have turned to be a basic auxiliary tool in reactor physics. In order to analyze the global problem, several aspects should be taken into consideration. The first aspect to be considered is that of the availability of the necessary nuclear data. The second one is the existence of a variety of methods and models to perform the calculations. The final phase for this kind of analysis is the qualification of the computing programs to be used, i.e. the verification of the validity domain of its nuclear data and the models involved. The last one is an essential phase, and in order to carry it on great variety of calculations are required, that will check the different aspects contained in the code. We here analyze the most important physical processes that take place in a nuclear reactor cell, and we consider the qualification of the lattice code WIMS, that calculates the neutronic parameters associated with such processes. Particular emphasis has been put in the application to natural uranium fuelled reactor, heavy water cooled and moderated, as the Argentinean power reactors now in operation. A wide set of experiments has been chosen: a.-Fresh fuel in zero-power experimental facilities and power reactors; b.-Irradiated fuel in both types of facilities; c.-Benchmark (prototype) experiments with loss of coolant. From the whole analysis it was concluded that for the research reactors, as well as for the heavy water moderated power reactors presently operating in our country, or those that could operate in a near future, the lattice code WIMS is reliable and produces results within the experimental values and their errors, and as good as those produced by the most reliable calculation tools available at present. (author). refs., figs., tabs.

  15. Requirements analysis and data model design for the development of vertical ERP solutions for the ceramic industry; Analisis de requerimientos y diseno de modelo de datos para el desarrollo de una solucion ERP vertical adaptada al sector ceramico

    Energy Technology Data Exchange (ETDEWEB)

    Oltra-Bandenes, R. F.; Gil-gomez, H.; Belver-Lopez, R.; Asensio-Cuesta, S.

    2013-05-01

    Currently, the existing information systems, and specifically the ERP, can not give adequate support to the management of manufacturing companies of ceramic tile, because, among other reasons, not to contemplate the existence of tone, size and quality within the same product. This feature, caused by the lack of homogeneity of the product (LHP), generates various problems in managing the product through the different business processes, such as, stocks management, order management, the production management, etc. Thus, it is necessary to develop an ERP solution that is able to manage adequately the ceramic product, including tone, size and quality. In this paper we analyze the requirements of the ceramic sector, in terms of product identification, and propose a data model to meet these requirements. The model arises as a basic guide for the development of vertical ERP solutions tailored to the ceramic industry. (Author) 30 refs.

  16. Requirements analysis and data model design for the development of vertical ERP solutions for the ceramic industry; Analisis de requerimientos y diseno de modelo de datos para el desarrollo de una solucion ERP vertical adaptada al sector ceramico

    Energy Technology Data Exchange (ETDEWEB)

    Oltra-Badenes, R. F.; Gil-Gomez, H.; Bellver-Lopez, R.; Asensio-Cuenta, S.

    2013-06-01

    Currently, the existing information systems, and specifically the ERP, can not give adequate support to the management of manufacturing companies of ceramic tile, because, among other reasons, not to contemplate the existence of tone, size and quality within the same product. This feature, caused by the lack of homogeneity of the product (LHP), generates various problems in managing the product through the different business processes, such as, stocks management, order management, the production management, etc. Thus, it is necessary to develop an ERP solution that is able to manage adequately the ceramic product, including tone, size and quality. In this paper we analyze the requirements of the ceramic sector, in terms of product identification, and propose a data model to meet these requirements. The model arises as a basic guide for the development of vertical ERP solutions tailored to the ceramic industry. (Author)

  17. Design of a mannequin for spectroscopy magnetic resonance of proton. Preliminary results of its application; Diseno de un maniqui para espectroscopia por resonancia magnetica de proton. resultados preliminares de su aplicacion

    Energy Technology Data Exchange (ETDEWEB)

    Parra Osoirio, V.; Galan Montenegro, P.; Moreno Saiz, C.; Garcia-Alvarez, R.; Arrabal Nunez, S.; Caudepon Moreno, F.; Navarro Guirado, F.; Asensjo Garcia, B.

    2013-07-01

    The proton magnetic resonance spectroscopy is a technique of metabolic Imaging allowing in vivo measurement of the levels of different metabolites. Is under increasing development and has shown an improvement of diagnostic indexes and therapeutic, since it allows: differential diagnosis between injuries, determination of tumor grade of Pre surgical form, determination of the presence of a lesion until it is clear, definition of progress and evaluation of the effects of a treatment. The aim in this work is to have a mannequin that allows analyze and adjust various parameters involved in the spectroscopic process, and establish a quantification of these parameters. (Author)

  18. Diseno de una matriz de soporte compuesta de colageno de piel de tiburon-aloe para ingenier a tisular (Design of Shark Skin Collagen-Aloe Composite Scaffold for Tissue Engineering)

    Science.gov (United States)

    2008-01-01

    colágeno es un nuevo biomaterial utilizado para la administración de fármacos, la fabri- cación de apósitos o como sustrato para ingeniería tisular cuya...crecimiento de fi broblastos in vitro. MATERIALES Y MÉTODOS Materiales El tiburón lechoso (Rhizoprionodon acutus) se capturó en la costa local y se...1000 rpm durante 3-5 minutos, se suspendieron de nuevo en medio fresco con FCS al 10%, se sembraron por la matriz de soporte (25.000 células

  19. Conceptual design of a nucleo electric simulator with PBMR reactor based in Reduced order models; Diseno conceptual de un simulador de nucleo electrica con reactor PBMR basado en modelos de orden reducido

    Energy Technology Data Exchange (ETDEWEB)

    Valle H, J.; Morales S, J.B. [UNAM, DEPFI, Campus Morelos, en IMTA Jiutepec, Morelos (Mexico)]. e-mail: jms0620@yahoo.com

    2005-07-01

    This project has as purpose to know to depth the operation of a PBMR nucleo electric type (Pebble Bed Modular Reactor), which has a reactor of moderate graphite spheres and fuel of uranium dioxide cooled with Helium and Brayton thermodynamic cycle. The simulator seeks to describe the dynamics of the one process of energy generation in the nuclear fuel, the process of transport toward the coolant one and the conversion to mechanical energy in the turbo-generators as well as in the heat exchangers indispensable for the process. The dynamics of reload of the fuel elements it is not modeled in detail but their effects are represented in the parameters of the pattern. They are modeled also the turbo-compressors of the primary circuit of the work fluid. The control of the power of the nuclear reactor is modeled by means of reactivity functions specified in the simulation platform. The proposed mathematical models will be settled in the platform of simulation of Simulink-Mat Lab. The proposed control panels for this simulator can be designed and to implement using the box of tools of Simulink that facilitates this process. The work presents the mathematical models more important used for their future implementation in Simulink. (Author)

  20. Genetic algorithms used to optimize an artificial neural network design used in neutron spectrometry; Algoritmos geneticos utilizados para optimizar un diseno de red neuronal artificial usado en espectrometria de neutrones

    Energy Technology Data Exchange (ETDEWEB)

    Arteaga A, T.; Ortiz R, J. M.; Vega C, H. R., E-mail: tarcicio70@yahoo.co.uk [Universidad Autonoma de Zacatecas, Av. Lopez Velarde 117, 98600 Zacatecas, Zac. (Mexico)

    2016-10-15

    Artificial neural networks (Ann) are widely used; it which consist of an input layer, one or more hidden layers and an output layer; these layers contain neurons and each has connections called weights, where the knowledge are allowed and let to Ann solve problems proposed. These Ann is used to reconstruction of the energy spectrum of neutrons from count rates and develop Bonner sphere neutron dosimetry. Currently, we have developed Ann with high performance and generalization ability. Determine your optimal architecture is usually a difficult task, an exhaustive search of all possible combinations of parameters is rarely possible further training of the neural network with random initial weights can cause two major drawbacks: it can stuck in local minima or converge very slowly. In this project it will be used Genetic Algorithms (Ga); which are based on the principle or analogy of evolution through natural selection and has shown to be very effective in optimizing complex search functions and large spaces or to find a near optimal overall efficiency. The aim is to decrease the architecture in number of hidden neurons and therefore the total number of connections is reducing. The benefits obtained by optimizing the network are that the number of connections would be considerably smaller and thus the computational complexity, hardware integration, resources will be lower such that will allow to be even more viable implemented. To use the Ga three problems must be solve: 1) coding the problem into chromosomes. 2) Construct a fitness function. 3) Proper selection of genetic operators; crossover, selection, mutation. As a result, the scientific knowledge obtained can to be applied to similar problems having a reference parameters used and their impact on the optimization would to be generated. It concluded that the input layer and output are subject to the problem; the Ga propose the optimal number of neurons in the hidden layer without losing the quality of the results. (Author)

  1. Characterization of the rock salt for the design of underground storage in saline domes; Caracterizacion de la roca sal-gema para el diseno de almacenamientos en domos salinos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Meyenberg, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The saline domes are natural geological formations, that have been formed in the underground, through the passage of millions of years. In Europe, they are used for hydrocarbon storage; for instance France is planning to increase, in a short term, its crude storing capacity in domes of 5 to 10 millions cubic meters (60 million of barrel), holding capacity. Additionally, studies are being conducted on the stability of this type of domes, for the storage of nuclear wastes during 100 thousand or 1 million years. [Espanol] Los domos salinos son formaciones geologicas estructurales naturales, que se han constituido en el subsuelo, en el transcurso de millones de anos. En Europa, se aprovechan para almacenar hidrocarburo; por ejemplo, Francia planea aumentar, a corto plazo, su capacidad de almacenamiento de crudo en domos de 5 a 10 millones de metros cubicos (60 millones de barriles). Ademas, se realizan estudios de estabilidad en este tipo de domos, para almacenar desechos nucleares durante 100 mil o 1 millon de anos.

  2. New strategies of reloads design and models of control bars in boiling water reactors; Nuevas estrategias de diseno de recargas y de patrones de barras de control en reactores de agua en ebullicion

    Energy Technology Data Exchange (ETDEWEB)

    Castillo M, J. A.; Ortiz S, J. J.; Perusquia del Cueto, R., E-mail: alejandro.castillo@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2011-11-15

    In this work the results obtained when analyzing new strategies in the reload designs of nuclear fuel and models of control bars, for boiling water reactors are presented. The idea is to analyze the behaviour of the reactor during an operation cycle, when the heuristic rules are not used (commonly used by expert engineers in both designs). Specifically was analyzed the rule of low leak and the load strategy Control Cell Core for the design of a fuel reload. In a same way was analyzed the rule of prohibiting the use of the intermediate positions in the control bars, as well as the construction of bar models based on load strategies type Control Cell Core. In the first analysis a balance and transition cycle were used. For the second analysis only a transition cycle was used, firstly with the reloads designed in the first analysis and later on with reloads built by other methods. For the simulation of the different configurations proposed in both cases, was used the code Simulate-3. To obtain the designs in both studies, the heuristic techniques or neural networks and taboo search were used. The obtained results show that it can be omitted of some rules used in the ambit for the mentioned designs and even so to obtain good results. To carry out this investigation was used Dell work station under Li nux platform. (Author)

  3. Designing wastewater treatment plants for small towns: a program in Visual Basic; Programa en Visual Basic de: Diseno de estaciones de depuracion de aguas residuales en pequenos y medianos nucleos

    Energy Technology Data Exchange (ETDEWEB)

    Coolado Lara, R. [Universidad de Cantabria (Spain)

    2000-07-01

    A program for designing wastewater treatment plants for towns of between 5 and 100,000 inhabitants is presented. This program, in Visual Basic for Windows, allows you to select several types of sewage: urban, farm and industrial, as well as percolation water and storm water. The program can choose between several types of pre-treatments, primary, secondary and tertiary treatments, until the required contamination level of the effluent is reached. The corresponding input and output forms are shown on the screen and a summary of the variables and a dimensioned drawing of the required solution can be printed out. (Author)

  4. Product design management and organizational learning capability in several company types of the ceramic sector; Gestion del diseno de producto y capacidad de aprendizaje organizativo en varios tipos de empresas del sector ceramico

    Energy Technology Data Exchange (ETDEWEB)

    Chiva, R.; Lapiedra, R.; Devece, C.; Gil, I.

    2012-11-01

    This study analyses the product design management in several companies of the Spanish ceramic sector and its relationship with organizational learning. We carried out a case study of four companies in order to assess the organizational learning factors involved in the two phases of the product design process: the analytical-conceptual and the technical-creative phases. The case study shows a positive relationship between the organizational learning factors analysed and the product design process. Specifically, the factors related to market, technology and organization knowledge acquisition are linked to the analytical-conceptual phase. The organizational learning factors related to knowledge dissemination and use are linked to the technical-creative phase or the global management of the design process. (Author) 42 refs.

  5. Design and construction of prompt-gamma spectroscopy facility applied to the boron determination; Diseno y construccion de una facilidad de espectrometria prompt-gamma aplicada a la determinacion de boro

    Energy Technology Data Exchange (ETDEWEB)

    Poblete, Victor; Henriquez, Carlos; Klein, Juan; Navarro, Gustavo [Comision Chilena de Energia Nuclear, Santiago (Chile). Centro de Estudios Nucleares La Reina, Comision Chis Nucleares La Reina, Comision Chi Reina

    1997-12-31

    A prompt-gamma spectroscopy facility was developed using the south tangential neutron beam of the RECH-1 research reactor for boron determination. The implementation of a thermal neutron beam was performed considering different aspects such as biological protection of working area and the beam collimation for a Ge detector, design and sample holder selection, standards and sample preparation. One ppm of Boron in different samples with counting-rate of 20 minutes and a good accuracy were determined. (author). 5 refs.

  6. Design and fabrication of a chamber for the deposit of thin films by laser ablation; Diseno y fabricacion de una camara para el deposito de peliculas delgadas por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Chirino O, S.; Escobar A, I.; Camps C, E.; Garcia E, J.I. [Departamento de Fisica, ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2000-07-01

    The laser ablation technique is an alternative for the obtention of thin films which is less expensive, more reliable, efficient and with some advantages with respect to conventional processes. On of the most important components which forms a laser ablation system is the vacuum chamber, that has as general purposes the following: a) To carry out studies about plasma such as optical emission spectroscopy and measurements by deflectometry. b) To carry out an In situ monitoring about the film growth through the reflectivity measurements of the combination substrate-film. c) To deposit thin films of different materials such as oxides, carbon, metals, etc. In this work it is showed how the vacuum chamber was designed and made to perform the store of thin films by laser ablation and for characterising the formed plasma as a result of the ablation process. The chamber design was enough versatile that will allow to add it more accessory just making it simple modifications. Its cost was very cheap more or less one twentieth of a commercial chamber. (Author)

  7. Design of a Quality Control Program for the Measurement of Gross Alpha and Gross Beta Activities (LMPR-CIEMAT); Diseno del Control de Calidad de las Medidas de Actividad Alfa-Beta Total (LMPR-CIEMAT)

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, A.; Yague, L.; Gasco, C.; Navarro, N.; Higueras, E.; Noguerales, C.

    2010-10-21

    In accordance with international standards, general requirements for testing laboratories have to include a quality system for planning, implementing, and assessing the work performed by the organization and for carrying out required quality assurance and quality control. The purpose of internal laboratory quality control is to monitor performance, identify problems, and initiate corrective actions. This report describes the internal quality control to monitor the gross alpha and beta activities determination. Identification of specific performance indicators, the principles that govern their use and statistical means of evaluation are explained. Finally, calculation of alpha and beta specific activities, uncertainties and detection limits are performed. (Author) 10 refs.

  8. Lixiviation of heavy metals of hazardous industrial wastes by means of thermostatized columns and design of a pilot plant; Lixiviacion de metales pesados de residuos industriales peligrosos por medio de columnas termostatizadas y diseno de una planta piloto

    Energy Technology Data Exchange (ETDEWEB)

    Vite T, J.; Leon, C.C. de [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Vite T, M.; Soto T, J.L. [IPN, SEPI, ESIME 07738 Mexico D.F. (Mexico)]. e-mail: jvite@nuclear.inin.mx

    2006-07-01

    purpose of this work was to evaluate the efficiency of lixiviation of heavy metals, using thermostatized columns and hazardous industrial residual wastes: those by the volume with which are generated and its high toxicity, its represent a great problem for it treatment and disposition, in this work a diagram of a pilot plant for extraction of heavy metals is included. The process and equipment were patented in United States and in Mexico. For the development of this study four thermostated columns were used that were coupled. The waste were finely milled and suspended in an aqueous pulp adding of 10 - 40gL{sup -1} of mineral acid or sodium hydroxide until reaching an interval of pH of 2,5,7 and 10. Its were used of 4-10 gL{sup -1} of a reducer agent and of 0.3-1.5 g of a surfactant agent. In some cases with this method was possible to remove until 100% of heavy metals. It was used Plasma Emission Spectroscopy to determine the concentrations of the cations in the lixiviation liquors. For studying the metallic alloys the X-ray diffraction technique was used. (Author)

  9. Design and implementation of a software for the remote control and monitoring of radiation portals; Diseno e implementacion de un software para la gestion y monitorizacion remota de porticos de radiaciones

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, J.; Rica, P. de la; Vivas, A.; Caballero, M.; Baeza, A.

    2012-07-01

    This paper describes the main activities developed for the detection of ionizing radiation in each eco-park access and have knowledge in time of the radioactive contents which possess the containers to the entry of these facilities, to identify both locally and remotely the origin of radiological anomalies that occur and act accordingly to correct them.

  10. State of the art in the process design of large sea water desalination plants; Estado del arte en el diseno del proceso de plantas desaladoras de agua de mar de gran capacidad

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Sanchez, J. M.; Sanchez Castillo, N.; Sanchez Castillo, R.

    2008-07-01

    The desalination of seawater is used in commercial operations worldwide in order to obtain large quantities of proper water for population supply, irrigation or industrial uses. The designs of the processes which are involved in desalination are changing all the time. In this paper the evolution of the processes of seawater desalination plants will be discussed. It will focus on large Reverse Osmosis desalination plants: also it will discuss the reasons of this evolution. (Author) 8 refs.

  11. Design, construction and installation of the electromechanical components of the current control of filament of the Pelletron Electron Accelerator; Diseno, construccion e instalacion de las componentes electromecanicas del control de corriente de filamento del acelerador de electrones Pelletron

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar J, R.A.; Valdovinos A, M.; Lopez V, H. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1985-01-15

    For the operation of the Pelletron electron accelerator is required to have control of the filament current. For it was designed, built and installed an electromechanical system located in the Acceleration Unit inside the Accelerator tank and operated from the Control console. All the components located inside the tank operated under the following conditions: Pressure: until 7.03 Kg/cm{sup 2}; High voltage: 10{sup 6} V (only the insulating arrow); Atmosphere: mixture of N{sub 2} and CO{sub 2} or SF{sub 6}. (Author)

  12. Energy efficiency through design and sustainable construction of houses located in the Mexican Caribbean; Eficiencia Energetica a traves del diseno y construccion sostenible de viviendas ubicadas en el Caribe Mexicano

    Energy Technology Data Exchange (ETDEWEB)

    Bojorquez, I. B.; Perez, M. S.; Aguilar, J. A.

    2008-07-01

    Public policies focused to the Environment conservation and, low power consumption construction systems, are some of the Housing Sustainable Construction bases in an urban setting. This work approach to the analysis of the correlation power efficiency-design in the social housing located in the tropical-humid climate characteristic of the Mexican Caribbean, like starting point to define the recommendations of a Sustainable construction in this sector. the legal aspects were considered on sustainable construction and some experiences of investigation in the subject were reviewed. Also an exercise for the calculation of thermal gain was made as it bases of this analysis. This exercise is part of the project in process, that will define the recommendations of design for energy saving in the social housing. (Author)

  13. Circuits design of action logics of the protection system of nuclear reactor IAN-R1 of Colombia; Diseno de los circuitos de la logica de actuacion del sistema de proteccion del reactor nuclear IAN-R1 de Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J. L.; Rivero G, T.; Sainz M, E., E-mail: joseluis.gonzalez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    Due to the obsolescence of the instrumentation and control system of the nuclear research reactor IAN-R1, the Institute of Geology and Mining of Colombia, IngeoMinas, launched an international convoking for renewal it which was won by the Instituto Nacional de Investigaciones Nucleares (ININ). Within systems to design, the reactor protection system is described as important for safety, because this carried out, among others two primary functions: 1) ensuring the reactor shutdown safely, and 2) controlling the interlocks to protect against operational errors if defined conditions have not been met. To fulfill these functions, the various subsystems related to the safety report the state in which they are using binary signals and are connected to the inputs of two redundant logic wiring circuits called action logics (Al) that are part of the reactor protection system. These Al also serve as logical interface to indicate at all times the status of subsystems, both the operator and other systems. In the event that any of the subsystems indicates a state of insecurity in the reactor, the Al generate signals off (or scram) of the reactor, maintaining the interlock until the operator sends a reset signal. In this paper the design, implementation, verification and testing of circuits that make up the Al 1 and 2 of IAN-R1 reactor is described, considering the fulfillment of the requirements that the different international standards imposed on this type of design. (Author)

  14. Adaptation and implementation of the TRACE code for transient analysis on designs of cooled lead fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2014-07-01

    The article describes the changes implemented in the TRACE code to include thermodynamic tables of liquid lead drawn from experimental results. He then explains the process for developing a thermohydraulic model for the prototype ALFRED and analysis of a selection of representative transient conducted within the framework of international research projects. The study demonstrates the applicability of TRACE code to simulate designs of cooled lead fast reactors and exposes the high safety margins are there in this technology to accommodate the most severe transients identified in their security study. (Author)

  15. Design of the core of a breed/burn fast reactor with the deterministic code KANEXT; Diseno del nucleo de un reactor rapido de cria/quemado con el codigo deterministico KANEXT

    Energy Technology Data Exchange (ETDEWEB)

    Lopez S, R. C.; Francois L, J. L., E-mail: rcarlos.lope@gmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    The breeding fast reactors are interesting because they generate more plutonium than they consume, however, the fuel has to be reprocessed for the generated plutonium is used in another reactor. In a breed/burn reactor (BBR) the plutonium is generated and used -in situ- inside the same reactor, reducing this way costs and the proliferation possibility. In this work, the core of a BBR was designed; cooled by sodium that consists of 210 active assemblies and 7 spaces for control rods, each assembly consists of 169 pines. The design differs from other BBR it includes a blanket in the reactor center. The above-mentioned was to take advantage of the fact by geometry that the population of fast and epithermal neutrons will be high in the area, due to the fissions in adjacent fissile areas. Favorable results were obtained, although not definitive with exchange scheme of spent fuel. Efforts should be made in the future to homogenize the power generation within the reactor and replace the spent assemblies more efficiently. (Author)

  16. Adaptation and implementation of the TRACE code for transient analysis in designs lead cooled fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2015-07-01

    Lead-Cooled Fast Reactor (LFR) has been identified as one of promising future reactor concepts in the technology road map of the Generation IVC International Forum (GIF)as well as in the Deployment Strategy of the European Sustainable Nuclear Industrial Initiative (ESNII), both aiming at improved sustainability, enhanced safety, economic competitiveness, and proliferation resistance. This new nuclear reactor concept requires the development of computational tools to be applied in design and safety assessments to confirm improved inherent and passive safety features of this design. One approach to this issue is to modify the current computational codes developed for the simulation of Light Water Reactors towards their applicability for the new designs. This paper reports on the performed modifications of the TRACE system code to make it applicable to LFR safety assessments. The capabilities of the modified code are demonstrated on series of benchmark exercises performed versus other safety analysis codes. (Author)

  17. BWR simulation in a stationary state for the evaluation of fuel cell design; Simulacion de un reactor BWR en estado estacionario para la evaluacion del diseno de celdas de combustible

    Energy Technology Data Exchange (ETDEWEB)

    Montes T, J. L.; Ortiz S, J. J.; Perusquia del C, R.; Castillo M, A., E-mail: joseluis.montes@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    In this paper the simulation of a BWR in order to evaluate the performance of a set of fuel assemblies under stationary state in three dimensions (3-D) is presented. 15 cases selected from a database containing a total of 18225 cases are evaluated. The main selection criteria were based on the results of the design phase of the power cells in two dimensions (2-D) and 3-D initial study. In 2-D studies the parameters that were used to qualify and select the designs were basically the local power peaking factor and neutron multiplication factor of each fuel cell. In the initial 3-D study variables that defined the quality of results, and from which the selection was realized, are the margins to thermal limits of reactor operation and the value of the effective multiplication factor at the end of cycle operation. From the 2-D and 3-D results of the studies described a second 3-D study was realized, where the optimizations of the fuel reload pattern was carried out. The results presented in this paper correspond to this second 3-D study. It was found that the designs of the fuel cell they had a similar behavior to those provided by the fuel supplier of reference BWR. Particularly it noted the impact of reload pattern on the cold shut down margin. An estimate of the operation costs of reference cycle analyzed with each one designed reload batch was also performed. As a result a positive difference (gain) up to 10,347 M/US D was found. (Author)

  18. Design and device construction for plane tables preparation for counter alpha/beta total; Diseno y construccion de dispositivo para preparacion de planchetas para contador alfa/beta total

    Energy Technology Data Exchange (ETDEWEB)

    Galicia C, F. J.; Monroy G, F., E-mail: fgalicia82@yahoo.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    This work presents the design and assembly of a device for plane tables preparation for quantification alpha/beta total of radioactive waste samples. The determination of the activity index alpha/beta total is used to detect a wide variety of matrices quickly and the concentration of alpha and/or beta emitters of the contained radionuclides in different samples. In particular, the determination of the activity index alpha and beta total of radioactive wastes involves the digestion of samples in aggressive means that will be evaporated to dryness for its quantification. With the purpose of controlling the emission of corrosive gases during the preparation of the plane tables for the quantification of the index alpha and beta total, was designed and built the device in the Radioactive Waste Laboratory that allows to prepare plane tables for proportional counters in a sure and efficient way. The device is constituted by heating equipment, evaporation cylinder and a gases cleaning system. The self-absorption curve got ready starting from the device. (Author)

  19. Design and optimization of electronics associated with a new system detector for verification of complex treatments of radiotherapy; Diseno y optimizacion de la electronica asociada a un nuevo sistema detector para verificacion de tratamientos complejos de radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Ovejero, M. C.; Perez Vega-Leal, A.; Nunez Martinez, R.; Espino, J. M.; Arrans, R.; Gallardo, M. I.; Abou-Haidar, Z.; Alvarez, M. A. G.; Cortes Giraldo, M. A.

    2013-07-01

    After the promising results obtained in the project {sup R}adio{sup ,} a review of system design has been taken in order to improve the results. This work is the study of the response of the system of data acquisition based on the characteristics of the element inclusive of the current generated by the radiation. The goal is to optimize the charging curve of the condenser for applied radiation. (Author)

  20. Mechanism design for the control rods conduction of TRIGA Mark III reactor in the NINR; Diseno del mecanismo para la conduccion de las barras de control del reactor Triga Mark III del ININ.

    Energy Technology Data Exchange (ETDEWEB)

    Franco C, A

    1997-12-01

    This work presents in the first chapter a general studio about the reactor and the importance of control rods in the reactor , the mechaniucal design attending to requisitions that are imposed for conditions of operation of the reactor are present in the second chapter, the narrow relation that exists with the new control console and the mechanism is developed in the thired chapter, this relation from a point of view of an assembly of components is presents in fourth chapter, finally reaches and perspectives of mechanism forming part of project of the automation of reactor TRIGA MARK III, are present in the fifth chapter. (Author).

  1. Design of a technique for the radiotherapy treatment of patients of prostate with bilateral prosthetic hip; Diseno de una tecnica para el tratamiento radioterapico de pacientes de prostata con protesis bilateral de cadera

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, C.; Perez-Alija, J.; Olivares, S.; Loscos, S.; Pedro, A.

    2013-07-01

    The design of the plan of treatment of patients who have to undergo radical radiotherapy of prostate and that incorporate some sort of hip prosthesis is usually complex. the case of a patient's prostatic bed with bilateral hip prosthesis to assess radical radiotherapy to the 70Gy in bed. The objective of this paper is to present the chosen technique designed for this treatment. (Author)

  2. Design and modernization of the control room with of the new digital I and C systems; El diseno y modernizacion de las salas de control con los nuevos sistemas de I and C digital

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, L. A.; Ortega, F.; Rejas, L.

    2011-07-01

    The use of the new digital I and c systems in the design of the new nuclear power plants, as well as the modernization of the existing ones, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept, therefore a detailed analysis is required to take into consideration all the operating and human factor aspects. based on Tecnatom's experience, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (Author)

  3. Design and implementation of the Molecular Imaging Unit for large animals at the National Center for Cardiovascular Research; Diseno y puesta en marcha de la Unidad de Imagen Molecular para animales grandes del Centro Nacional de Investigaciones Cardiovasculares

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, G.; Delgado Alberquilla, R.; Moreno Lopez, J.; Escudero Toro, R.

    2011-07-01

    in this paper describes the most important imaging techniques to be used with the latest equipment as well as the future of PET-MRI combination, its application in research on large animals and the implications for the design of the units, shielding calculation management sources of radiation and waste. This has required value and integrate the specific requirements of a research center in terms of bio security, care of large animals (pigs), health status of animals in an environment of highly demanding conditions PR.

  4. Design of a pilot plant to study wastewater treatability. Utilization to nitrification-denitrification treatment of urban wastewater; Diseno de una plant pilot para estudios de tratabilidad de aguas residuales. Aplicacion a la nitrificacion/desnitrificaciond e aguas urbanas

    Energy Technology Data Exchange (ETDEWEB)

    Otal, E.; Vilches, L. F.; Pineda, D.; Garcia, A.; Fernandez-Pereira, C.

    2002-07-01

    The conventional design and the operation of secondary treatment of urban wastewater treatment plants presents different problems such as bulking foaming, the removal of nutrients as nitrogen and phosphorus, and the excess of sludge. to prevent these problems the use of selectors was initially proposed to selects the floc-formers bacteria against the filamentous microorganisms. In addition, these configurations removed nitrogen by the nitrification-denitrification mechanism and some of them removed both nitrogen and phosphors. In the last years, new systems have been developed to remove nitrogen, reducing the consumption of oxygen and the production of sludge by the use of different microorganisms, and by modifying environmental and operational conditions. To study the treatment urban wastewater in conditions similar to those existing in wastewater treatment plants and to improve the design and operational parameters of a large scale wastewater treatment plant, a versatile pilot plant has been designed. The main components of the plant are described in this paper. (Author) 18 refs.

  5. Design of the reactor coolant system and associated systems in nuclear power plants. Safety guide (Spanish Edition); Diseno del sistema de refrigeracion del reactor y los sistemas asociados en las centrales nucleares. Guia de seguridad

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-15

    This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. The basic requirements for the design of safety systems for nuclear power plants are established in the Safety Requirements publication, Safety Standards Series No. NS-R-1 on Safety of Nuclear Power Plants: Design, which it supplements. This Safety Guide describes how the requirements for the design of the reactor coolant system (RCS) and associated systems in nuclear power plants should be met. This publication is a revision and combination of two previous Safety Guides, Safety Series No. 50-SG-D6 on Ultimate Heat Sink and Directly Associated Heat Transport Systems for Nuclear Power Plants (1982), and Safety Series No. 50-SG-D13 on Reactor Coolant and Associated Systems in Nuclear Power Plants (1987), which are superseded by this new Safety Guide. The revision takes account of developments in the design of the RCS and associated systems in nuclear power plants since the earlier Safety Guides were published in 1982 and 1987, respectively. The other objectives of the revision are to ensure consistency with Ref., issued in 2004, and to update the technical content. In addition, an appendix on pressurized heavy water reactors (PHWRs) has been included.

  6. Design and fabrication of a mechanical alloying system for preparing intermetallic, nanocrystalline, amorphous and quasicrystalline compounds; Diseno y fabricacion de un sistema de aleado mecanico para preparar compuestos intermetalicos, nanocristalinos, amorfos y cuasicristalinos

    Energy Technology Data Exchange (ETDEWEB)

    Bonifacio M, J.; Iturbe G, J.L.; Castaneda J, G. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    In this work a grinding system was designed and fabricated which allowed to improve the operation conditions in time, frequency, temperature and selection of the grinding media and that allow the contamination decrease of the compounds. By means of this method of mechanical alloying new metallic compounds can be produced, starting from elemental powders, with fine and controlled microstructures. These compounds prepared by this method are going to be used as materials for the hydrogen storage. (Author)

  7. Influence of photon recycling effects in the operation and design of GaAs solar cells; Influencia del reciclaje de fotones en el funcionamiento y del diseno de las celulas solares de Arsenico de Galio

    Energy Technology Data Exchange (ETDEWEB)

    Balenzategui Manzanares, J. L.

    2005-07-01

    Photon recycling (PR) is the process by which photons internally emitted in a semiconductor can be re-absorbed by the material, giving as result new electron-hole pairs. Although this process has been receiving some international research from the Sixties, because their effects revealed as relevant in certain devices and materials (as in gallium arsenide), its influence in the operation of solar cells has been scarcely considered in the past. Thus deposited it has been demonstrated that one of its major effects is an enhancement of the radiative carrier lifetine, photon recycling is not usually taken into account in photovoltaic, neither in device modelling and simulation, nor from the perspective of taking advantage of the phenomenon to improve the efficiency of solar cells. This work describes the results of our investigations in the field of photon recycling. (Author)

  8. CAGE: A standard design application to nuclear power plants of Cofrentes, Almaraz and Trillo; CAGE: Un diseno estandar de aplicacion a las centrales nucleares de Cofrentes, Almaraz y Trillo

    Energy Technology Data Exchange (ETDEWEB)

    Cubian Martinez, B.; Gomez Gomez, M.; Zornoza Garcia-Andrade, J.; Turrion Lopez, F.; Barrio, M. A. del; Cobos Perabad, A.; Garcia-Serrano, J. L.

    2016-08-01

    Design, engineering, supply, construction, assembly, supervision and quality control, construction management and commissioning of Alternative Emergency Management Centres (CAGES) of nuclear power plants Cofrentes (CNC), Almaraz (CNA) and Trillo (CNT) were awarded in the first half of 2014 to Iberdrola Engineering and Construction (IIC). After obtaining the required building permits issued by municipalities, following the delivery of the corresponding, basic project and execution, in January 2015, began civil works at CNA, CNT and in February of this year in CNC. (Author)

  9. Obtention process of phosphorus 32 starting from commercial sulfur and design and construction of the radiochemical separation prototype; Proceso de obtencion de fosforo-32 a partir de azufre comercial y diseno y construccion del prototipo de separacion radioquimica

    Energy Technology Data Exchange (ETDEWEB)

    Duarte A, C.; Alanis M, J.; Gutierrez R, C. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    In this work an obtention process of phosphorus 32 ({sup 32} P) in orthophosphoric acid form (H{sub 3}{sup 32}PO{sub 4}) is described starting from commercial sulfur. Also the design and construction of the experimental prototype used in the radiochemical separation and their results in three tests carried out is reported. (Author)

  10. Evaluation of the radial design of fuel cells in an operation cycle of a BWR reactor; Evaluacion del diseno radial de celdas de combustible en un ciclo de operacion de un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez C, J.; Martin del Campo M, C. [Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Facultad de Ingenieria, UNAM, Paseo Cuauhnahuac 8532, Jiutepec, Morelos (Mexico)]. e-mail: jgco@ver.megared.net.mx

    2003-07-01

    This work is continuation of one previous in the one that the application of the optimization technique called Tabu search to the radial design of fuel cells of boiling water reactors (BWR, Boiling Water Reactor) is presented. The objective function used in the optimization process only include neutron parameters (k-infinite and peak of radial power) considering the cell at infinite media. It was obtained to reduce the cell average enrichment completing the characteristics of reactivity of an original cell. The objective of the present work is to validate the objective function that was used for the radial design of the fuel cell (test cell), analyzing the operation of a one cycle of the reactor in which fuels have been fresh recharged that contain an axial area with the nuclear database of the cell designed instead of the original cell. For it is simulated it with Cm-Presto the cycle 10 of the reactor operation of the Unit 1 of the Nuclear Power station of Laguna Verde (U1-CNLV). For the cycle evaluation its were applied so much the simulation with the Haling strategy, as the simulation of the one cycle with control rod patterns and they were evaluated the energy generation and several power limits and reactivity that are used as design parameters in fuel reloads of BWR reactors. The results at level of an operation cycle of the reactor, show that the objective function used in the optimization and radial design of the cell is adequate and that it can induce to one good use of the fuel. (Author)

  11. Design of an artificial neural network, with the topology oriented to the reconstruction of neutron spectra; Diseno de una red neuronal artificial, con la topologia orientada a la reconstruccion del espectro de neutrones

    Energy Technology Data Exchange (ETDEWEB)

    Arteaga A, T.; Ortiz R, J.M.; Vega C, H.R.; Hernandez D, V.M.; Manzanares A, E.; Mercado S, G.A. [Unidades Academicas de Estudios Nucleares, Ingenieria Electrica y Matematicas, Universidad de Zacatecas, A.P. 336, 98000 Zacatecas (Mexico)]. e-mail: tarcicio70@yahoo.co.uk

    2006-07-01

    People that live in high places respect to the sea level, in latitudes far from the equator or that they travel by plane, they are exposed to atmospheres of high radiation generated by the cosmic rays. Another atmosphere with radiation is the medical equipment, particle accelerators and nuclear reactors. The evaluation of the biological risk for neutron radiation requires an appropriate and sure dosimetry. A commonly used system is the Bonner Sphere Spectrometer (EEB) with the purpose of reconstructing the spectrum that is important because the equivalent dose for neutrons depends strongly on its energy. The count rates obtained in each sphere are treated, in most of the cases, for iterative methods, Monte Carlo or Maximum Entropy. Each one of them has difficulties that it motivates to the development of complementary procedures. Recently it has been used Artificial Neural Networks, ANN) and not yet conclusive results have been obtained. In this work it was designed an ANN to obtain the neutron energy spectrum neutrons starting from the counting rate of count of an EEB. The ANN was trained with 129 reference spectra obtained of the IAEA (1990, 2001), 24 were built as defined energy, including isotopic sources of neutrons of reference and operational, of accelerators, reactors, mathematical functions, and of defined energy with several peaks. The spectrum was transformed from lethargy units to energy and were reaccommodated in 31 energies using the Monte Carlo code 4C. The reaccommodated spectra and the response matrix UTA4 were used to calculate the prospective count rates in the EEB. These rates were used as entrance and its respective spectrum was used as output during the net training. The net design is Retropropagation type with 5 layers of 7, 140, 140, 140 and 31 neurons, transfer function logsig, tansig, logsig, logsig, logsig respectively. Training algorithm, traingdx. After the training, the net was proven with a group of training spectra and others that its didn't know obtaining an excellent acting. For a trust interval of 95%, the value criticizes of the {chi}{sup 2} it is of 1.64 and our results give a maximum value of 0.357. When comparing with the results reported in the literature where were used different ANN there are trust intervals between 84 and 88%. The use of the ANN'S is an alternative to be used in neutron spectrometry. (Author)

  12. Design and construction of an automatic measurement electronic system and graphical neutron flux for the subcritical reactor; Diseno y construccion de un sistema electronico automatico de medicion y graficado del flujo neutronico para el reactor subcritico

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Balderas, E.G.; Rivero G, T. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    The National Institute of Nuclear Research (ININ) has in its installations with a nuclear subcritical reactor which was designed and constructed with the main purpose to be used in the nuclear sciences education in the Physics areas and Reactors engineering. Within the nuclear experiments that can be realized in this reactor are very interesting those about determinations of neutron and gamma fluxes spectra, since starting from these some interesting nuclear parameters can be obtained. In order to carry out this type of experiments different radioactive sources are used which exceed the permissible doses by far to human beings. Therefore it is necessary the remote handling as of the source as of detectors used in different experiments. In this work it is presented the design of an electronic system which allows the different positions inside of the tank of subcritical reactor at ININ over the radial and axial axes in manual or automatic ways. (Author)

  13. Development of tools to manage the operational monitoring and pre-design of the NPP-LV cycle; Desarrollo de herramientas para administrar el seguimiento operativo y el pre-diseno del ciclo de la CLV

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia, R.; Arredondo S, C.; Hernandez M, J. L.; Montes T, J. L.; Castillo M, A.; Ortiz S, J. J., E-mail: raul.perusquia@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    This paper presents the development of tools to facilitate the management so much, the operational monitoring of boiling water reactors (BWR) of the nuclear power plant of Laguna Verde (NPP-LV) through independent codes, and how to carry out the static calculations corresponding to process of optimized pre-design of the reference cycle next to current cycle. The progress and preliminary results obtained with the program SACal, developed at Instituto Nacional de Investigaciones Nucleares (ININ), central tool to achieve provide a management platform of the operational monitoring and pre-design of NPP-LV cycle are also described. The reached preliminary advances directed to get an Analysis center and automated design of fuel assembly cells are also presented, which together with centers or similar modules related with the fuel reloads form the key part to meet the targets set for the realization of a Management Platform of Nuclear Fuel of the NPP-LV. (Author)

  14. Impact of design of installations and in the personal staff formation of the hybrid equipment: PET-CT; Impacto en el diseno de instalaciones y en la formacion del personal de los equipos hibridos: PET-CT

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, R.; Soler, K.; Alonso, I., E-mail: ramon@orasen.co.cu, E-mail: karen@orasen.co.cu, E-mail: azul@orasen.con.cu [Centro Nacional de Seguridad Nuclear, La Habana (Cuba)

    2013-11-01

    In this article the general principles to be considered in the design of a Nuclear Medicine department with PET-CT, and address the existing problems regarding training needs and staff training, to take on this new technology.

  15. Design of a versatile detector for the detection of charged particles, neutrons and gamma rays. Neutron interaction with the matter; Diseno de un detector versatil para la deteccion de particulas cargadas, neutrones y rayos gamma. Interaccion neutronica con la materia

    Energy Technology Data Exchange (ETDEWEB)

    Perez P, J J [Comision Nacional de Seguridad Nuclear y Salvaguardias, Mexico, D.F. (Mexico)

    1991-07-01

    The Fostron detector detects charged particles, neutrons and gamma rays with a reasonable discrimination power. Because the typical detectors for neutrons present a great uncertainty in the detection, this work was focused mainly to the neutron detection in presence of gamma radiation. Also there are mentioned the advantages and disadvantages of the Fostron detector.

  16. Impact in the facilities design and the personnel formation of the hybrid equipment s: PET-CT; Impacto en el diseno de instalaciones y en la formacion del personal de los equipos hibridos: PET-CT

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, R.; Soler, K.; Alonso, I., E-mail: ramon@orasen.co.cu [Centro Nacional de Seguridad Nuclear, Calle 28 No. 504, Miramar, La Habana (Cuba)

    2014-08-15

    The Positron Emission Tomography-Computed Tomography (PET-CT), in the last years has demonstrated to be an image technique very effective for the diagnosis and the treatments continuation in different medical applications, because provides a valuable clinical information for the patient handling. The PET-CT is a technology used in the nuclear medicine for diagnostic, because integrates two different image techniques in an only device and in a single exam or study combine the results of both techniques. Also, is a hybrid tomograph that provides in a single image the biochemical information of a technique and the anatomical information of the other, what means that unifies the spatial resolution of a technique and the contrast resolution of the other, allowing this way to obtain a more precise and detailed diagnostic information, opening new opportunities in diagnostic, Radiotherapy planning and treatments continuation to the patients, being generated new links among the different radiological medical specialties. In nuclear medicine facilities with PET-CT, the radiological protection presents particular characteristics, due to the photons coexistence of 511 keV (generated by the annihilation of the emitted positrons from the different exposure sources) together to the X-rays emitted by the CT, what impacts in a direct way in those design requirements of the areas. On the other hand, this combination of the two image techniques imposes additional requirements to the learning and training of personnel, not considered until the present time. In this article are exposed the general principles that should be considered in the design of a Nuclear Medicine Area with PET-CT, and the existent problems related to the learning and training of personnel to assume this new technology are also approached. (Author)

  17. Design and construction of a height caliper of labyrinths seals of high power steam turbines; Diseno y construccion de un calibrador de alturas para sellos laberintos de turbinas de vapor de alta potencia

    Energy Technology Data Exchange (ETDEWEB)

    Quinonez Osuna, Jose R. [Instituto Tecnologico de Mazatlan, Mazatlan, Sinaloa (Mexico); Mazur Czerwiec, Zdzislaw [instituto de Investigaciones Electicas, Cuernavaca, Morelos (Mexico); Valdez Valdez, Omar [Instituto Tecnologico de Mazatlan, Mazatlan, Sinaloa (Mexico)

    2007-11-15

    This article presents the development of a new instrument that allows calibrating with exactness the labyrinths seals height of the radial type, normally used in steam turbines and many other turbo-machines. The calibration process derived from the application of the designed instrument is distinguished from the existing one in the fact of considering a perpendicularity reference that allows high exactness in the measurement of height differences (0,008 mm), which is performed at the moment of adjusting the steam seals each time that its sheets are substituted for new ones. Such characteristic, allows therefore, higher efficiency conditions, stability and trustworthiness in the unit operation, once maintenance of this kind has been applied to it. The lack of monitoring and periodic maintenance of the gaps between seals and rotor constitutes the main cause of efficiency loss in power plant turbines installed in Mexico, generating wastes of up to 4% of its capacity, which represents 15 MW in high power units. [Spanish] El articulo representa el desarrollo de un nuevo instrumento que permite calibrar con exactitud las alturas de los sellos laberinticos de tipo radial, ordinariamente empleados en turbinas de vapor y en muchas otras turbo-maquinas. El proceso de calibracion derivado de la aplicacion del instrumento disenado se distingue del existente, en el hecho de considerar una referencia de perpendicularidad que permite alta precision en la medicion de diferencias de altura (0.008 mm.), lo cual es realizado en el momento de ajustar los sellos de vapor cada vez que sus laminas son sustituidas por nuevas. Dicha caracteristica, procura por ende condiciones mayores de eficiencia, estabilidad y confiabilidad en la operacion de la unidad, una vez que le ha sido brindado un mantenimiento de esta naturaleza. La falta de monitoreo y mantenimiento periodico de los claros entre sellos y rotor, constituye la principal causa de perdida de eficiencia en las turbinas de las centrales electricas instaladas en Mexico, generandose desperdicios de hasta un 4% de su capacidad, lo cual representa 15 MW en unidades de alta potencia.

  18. Optimization of the boards of management/acquisition of a PET-CT in the design phase; Optimizacion de las salas de administracion/captacion de un PET-CT en la fase de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Verde Velasco, M. E.; Ramos Pacho, J. M.; Montes Fuentes, J. A.; Delgado Aparicio, C.; Gomez Llorente, J. M.; Cons Perez, N.; Garcia Repiso, N.; Saez Beltran, S.; Gomez Llorente, P. L.

    2013-07-01

    In this paper we study the doses received by the personnel of managing activity to the patients of the PET-CT, due to patients who are already injected and are resting during the uptake phase. The parameters will be taken into account are the placement in the pits of the armchairs or couches to inject patients, as well as the order of entry of such patients in each of the available boxes. (Author)

  19. Fuel design with low peak of local power for BWR reactors with increased nominal power; Diseno de un combustible con bajo pico de potencia local para reactores BWR con potencia nominal aumentada

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia C, R.; Montes, J.L.; Hernandez, J.L.; Ortiz, J.J.; Castillo, A. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: mrpc@nuclear.inin.mx

    2006-07-01

    The Federal Commission of Electricity recently announcement the beginning of the works related with the increase of the power to 120% of the original nominal one in the Boiling Water Reactors (BWR) of the Laguna Verde Central (CLV): In the National Institute of Nuclear Research (ININ) are carried out studies of the impact on the design of the recharge of derived fuel of this increase. One of the main effects of the power increase type that it is promoting, is the increment of the flow of generated vapor, what takes, to a bigger fraction of vacuum in the core presenting increased values of the maximum fraction to the limit, so much of the ratio of lineal heat generation (XFLPD) as of the ratio of critic power (MFLCPR). In the made studies, it is found that these fractions rise lineally with the increase of the nominal power. Considering that the reactors of the CLV at the moment operate to 105% of the original nominal power, it would imply an increment of the order of 13.35% in the XFLPD and in the MFLCPR operating to a nominal power of 120% of the original one. This would propitiate bigger problems to design appropriately the fuel cycle and the necessity, almost unavoidable, of to resort to a fuel assembly type more advanced for the recharges of the cores. As option, in the ININ the feasibility of continuing using the same type of it fuel assembles that one has come using recently in the CLV, the type GE12 is analyzed. To achieve it was outlined to diminish the peak factor of local power (LPPF) of the power cells that compose the fuel recharge in 13.35%. It was started of a fuel design previously used in the recharge of the unit 1 cycle 12 and it was re-design to use it in the recharge design of the cycle 13 of the unit 1, considering an increase to 120% of the original power and the same requirements of cycle extension. For the re-design of the fuel assembly cell it was used the PreDiCeldas computer program developed in the ININ. It was able to diminish the LPPF 14% of an original value from 1.43 to 1.24 that which was confirmed with the cells calculation code best estimate HELIOS. In later studies the acting of the re-designed fuel assemblies in the recharges simulation for the cycle 13 will be examine. (Author)

  20. Monte Carlo design of a system for the detection of explosive materials and analysis of the dose; Diseno Monte Carlo de un sistema para la deteccion de materiales explosivos y analisis de la dosis

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez A, P. L.; Medina C, D.; Rodriguez I, J. L.; Salas L, M. A.; Vega C, H. R., E-mail: pabloyae_2@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2015-10-15

    The problems associated with insecurity and terrorism have forced to designing systems for detecting nuclear materials, drugs and explosives that are installed on roads, ports and airports. Organic materials are composed of C, H, O and N; similarly the explosive materials are manufactured which can be distinguished by the concentration of these elements. Its elemental composition, particularly the concentration of hydrogen and oxygen, allow distinguish them from other organic substances. When these materials are irradiated with neutrons nuclear reactions (n, γ) are produced, where the emitted photons are ready gamma rays whose energy is characteristic of each element and its abundance allows estimating their concentration. The aim of this study was designed using Monte Carlo methods a system with neutron source, gamma rays detector and moderator able to distinguish the presence of Rdx and urea. In design were used as moderators: paraffin, light water, polyethylene and graphite; as detectors were used HPGe and the NaI(Tl). The design that showed the best performance was the moderator of light water and HPGe, with a source of {sup 241}AmBe. For this design, the values of ambient dose equivalent around the system were calculated. (Author)

  1. Application of the SPA in the design of a hydrogen producer plant coupled to a nuclear reactor; Aplicacion del APS en el diseno de una planta productora de hidrogeno acoplada a un reactor nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz S, T.; Nelson, P. F.; Francois, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico); Cruz G, M. J., E-mail: truizsmx@yahoo.com.mx [UNAM, Facultad de Quimica, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

    2013-10-15

    At the present time, one of the processes that is broadly investigated and that, theoretically demonstrates to be one of the most efficient for the hydrogen production, is the thermal-chemistry cycle Sulfur-Iodine (S-I) coupled to a nuclear reactor of very high temperature (VHTR). Because this chemical process of hydrogen production requires of a great inventory of toxic materials (sulphide compounds, hydriodic acid and iodine), is necessary the design of emergency systems with the purpose of protecting the facilities and the equipment s, the environment, as well as the near population. Given the impact of an accidental liberation of the process materials, as well as the proximity with the nuclear plant, is necessary that these emergency systems are the most reliable possible. This way, the results of the consequences analysis are utilized for the optimal localization of the gas sensors that activate the emergency systems, and the flows of the substances that are used for the leakage control. For all this, the use of the Safety Probabilistic Analysis methodology, as well as some standards of the nuclear industry, can be applied to the chemical installation to determine the fault sequences that can take to final states of not controlled leakage. This way, the use of methodologies of Event Tree Analysis and Fault Trees show in their results the components that but contribute in fault of such systems. In this work, is presented the evaluation of the joined models of event and fault trees and like with the obtained results, some proposals to increase the safety of the facilities are exposed. Also, the results of the evaluations of these proposals, and their impact of the probability of the not controlled fault sequences in a plant that is still in design stage are showed. (Author)

  2. The phase equilibrium diagrams as a tool for the design and use of refractories; Los diagramas de equilibrio de fases como una herramienta para el diseno y comprension del comportamiento en servicio de los materiales refractarios

    Energy Technology Data Exchange (ETDEWEB)

    Aza, A. H. de; Pena, P.; Caballero, A.; Aza, S. de

    2011-07-01

    Refractories are complex materials used at high temperature, in severely corrosive atmospheres and in contact with aggressive liquids. The high temperatures imply that such systems tend to equilibrium and this is frequently attained during service; at least local equilibrium is achieved. This allows the basic principles of phase diagrams to be used in this technology. Traditionally, refractories have been designed to be close to equilibrium so that in-service changes were restricted. Currently, additions of raw materials are often made that will react in use, in a controlled manner, to give favorable effects under the service conditions. Equilibrium diagrams are valid not only for determining the thermodynamic tendency but also for predicting the final equilibrium state and to know the way through which the material moves into the final state. In this context equilibrium diagrams become a powerful tool for a better understanding of the behavior of refractories during service. After a general consideration on the importance of phase equilibrium diagrams in this field, criteria for using equilibrium diagrams, as a tool for improving traditional refractories and/or designing advanced or new refractories, will be given. Pertinent examples in different systems will be discussed. This paper compiles and reviews the last plenary lecture given by Professor Salvador De Aza on the subject. (Author) 58 refs.

  3. Design of equipment for the detection of nickel-63 source of the gc-2010 electron capture detector; Diseno de equipo para la deteccion de la fuente de niquel-63 del detector de captura de electrones gc-2010

    Energy Technology Data Exchange (ETDEWEB)

    Lopez O, A.

    2016-07-01

    It is necessary to design a system that is able to detect the presence of the radioactive source nickel-63, located within the electron capture detector gc- 2010 through the use of Arduino technology, presence sensors and motion This in turn It must be interfaced with a system of tracking and tracing , so collectively be mounted inside the mobile laboratory for research and technological development of systems and equipment for measuring radiation , gases and particles. The program has a structure reading sensors, processing the acquired data and execution of an action if necessary. The system does this by receiving data autonomously, the data is processed and at the end, determines whether the source is in normal operating conditions, if subjected to movements that may cause undesired operation if being handled, or has it has been extracted. (Author)

  4. Recommendations and tools to design houses with passive solar cooling and mating in Mediterranean Sea; Recomendaciones y herramientas para el diseno de viviendas con calefaccion solar y climatizacion pasiva en una zona de clima mediterraneo

    Energy Technology Data Exchange (ETDEWEB)

    Muller, E.

    2004-07-01

    Recommendations for passive design and design tools based on European building codes were developed with extensive thermal simulations and a reference year especially prepared with hourly climate data from the central region of Chile. The results of the research were presented as a manual in Spanish enclosing simple design tools in an electronic spreadsheet. The design analysis is presented with a novel approach, that permits a better understanding and optimisation of the complex design balance between the demands for summer and winter in a mediterranean climate. The methodologies and approach that were developed are extended to other climatic regions. This way the investigation supports the improvement of thermal comfort conditions and the application of solar energy in dwellings as essential elements of a process of sustainable development. (Author)

  5. Natural Water Retention Measures (NWRM): from Design to Implementation through European Projects; Las Medidas Naturales de Retencion de Agua: del diseno a la implementacion a traves de proyectos europeos

    Energy Technology Data Exchange (ETDEWEB)

    Magdaleno Mas, F.; Dalacamara Andres, G.

    2015-07-01

    The Centre for Applied Technique Studies (CETA) of CEDEX has been working over the last few years in different European projects related with the design and development of natural water retention measures (NWRM). These are a number of measures, boosted by the Water Unit of the Environment Directorate-General of the European Commission. with close links to green infrastructures, which try to integrate, from a multifunctional approach, different legal and technical requirements aimed at a better adaptation to extreme hydro meteorological events, environmental protection and conservation, and maintenance of ecosystem services. This paper reviews the underpinning foundations of the concept and the mechanisms for designing and implementing NWRM. It also shows the way they can be applied, by presenting different initiatives developed by CETA since 2008 in Navarra (Arga-Aragon rivers system). For fulfilling those works, CETA has collaborated with environmental and hydraulic authorities of Navarra. It has also actively cooperated with research centres, such as the Institute IMDEA Water. specifically in a European project devoted to the diffusion, assessment, and presentation of NWRM within the context of the EU River Basin Districts. (Author)

  6. Design of a system of reference for positioning of patients in radiotherapy of breast cancer; Diseno de un sistema de referencia para el posicionamiento de pacientes en tratamiento radioterapico del cancer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Nebot, P.; Reinado, D.; Salvador, R.; Gonzalez-Pena, R.; Dalmases, F.; Romero, C.; Rosello, J.; Diez, S.; Cibrian, R.

    2013-07-01

    The objective of this work is the design of a system of repositioning of the patient allowing to minimize errors both in everyday's the same placement as in the position held during the session, so that treatment would be intensified in the area to be treated, avoiding possible damage to other healthy areas. (Author)

  7. Design and Implementation of an Integrated Modeling Platform for Sustainable Energy Planning - MODERGIS -. Colombia Case Study; Diseno e Implementacion de una Plataforma Integrada de Modelacion para la Planificacion Energetica Sostenible MODERGIS . Estudio de Caso Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Quijano, R

    2012-07-01

    This research presents the MODERGIS Integrated Simulations Platform as a tool to promote and develop renewable energy plans under sustainability criteria, in order to increment the participation of renewable technologies in the national energy mix and shows an application to Colombia as a case study. Potential zones of solar and wind energy and productive areas for bio-energies were determined, by means of a geographical information system which simulated energy scenarios influenced by climatic phenomena up to the year 2030. Results yield potentials of 26,600 MW in wind energy and 350,000 MW in solar energy. Bioenergy potentials in a sustainable way of 366,310 k m2 per biomass, 291,486 km{sup 2} in African palm, 9,667 km{sub 2} in sugar cane. These scenarios were simulated in a supply/demand with time horizons up until 2030, including an analysis of the effects on the energy systems of the El Nino Southern Oscillation atmospheric component (ENSO). Finally, in order to obtain an appropriate mix of renewable sources, that could be introduced in the national energy mix, the Multi-Criteria Analysis method VIKOR was used, allowing to perform 5151 possible combinations of renewable projects; the optimal selection corresponds to 600 MW from wind power, 740 MW solar photovoltaic and 660 MW solar thermoelectric. Giving these results to the new scene allowed for incrementing the participation of renewable technologies up to a 0.23% in the current year and up to a 7% of the energy mix in the year 2030. (Author)

  8. Design and simulation of the operation of a rotary valve for a portable prototype of a {sup 99m}Tc generator; Diseno y simulacion de funcionamiento de una valvula giratoria para un prototipo portatil generador de Tc-99m

    Energy Technology Data Exchange (ETDEWEB)

    Gago, Javier; Baltuano, Oscar; Hernandez, Yuri; Montoya, Eduardo [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru); Lopez, Yon [Universidad Nacional de Ingenieria, Lima (Peru). Facultad de Ingenieria Mecanica y Mecanica Electrica; Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru)

    2013-07-01

    The design of a specific purpose rotary valve for a {sup 99m}Tc generator by extraction, which is being developed at IPEN, in order to contribute to the decentralization of nuclear medicine with social inclusion, is described and discussed in this paper. The prototype is reliable, low cost, and consists of a set of three three-way rotating valves with two positions, in a single device of Teflon®, which is driven by a servomotor. Structural analysis is reported considering external loads applied to the prototype, plus simulation and testing operation using a 12 volts servomotor of 16 RPM provided of a CNY70 infrared sensor, for control purposes. (authors).

  9. Implement of MOX fuel assemblies in the design of the fuel reload for a BWR; Implemento de ensambles de combustible MOX en el diseno de la recarga de combustible para un BWR

    Energy Technology Data Exchange (ETDEWEB)

    Enriquez C, P.; Ramirez S, J. R.; Alonso V, G.; Palacios H, J. C., E-mail: pastor.enriquez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2011-11-15

    At the present time the use of mixed oxides as nuclear fuel is a technology that has been implemented in mixed reloads of fuel for light water reactors. Due to the plutonium production in power reactors, is necessary to realize a study that presents the plutonium use like nuclear fuel. In this work a study is presented that has been carried out on the design of a fuel assembly with MOX to be proposed in the supply of a fuel reload. The fissile relationship of uranium to plutonium is presented for the design of the MOX assembly starting from plutonium recovered in the reprocessing of spent fuel and the comparison of the behavior of the infinite multiplication factor is presented and of the local power peak factor, parameters of great importance in the fuel assemblies design. The study object is a fuel assembly 10 x 10 GNF2 type for a boiling water reactor. The design of the fuel reload pattern giving fuel assemblies with MOX, so the comparison of the behavior of the stop margin for a fuel reload with UO{sub 2} and a mixed reload, implementing 12 and 16 fuel assemblies with MOX are presented. The results show that the implement of fuel assemblies with MOX in a BWR is possible, but this type of fuels creates new problems that are necessary to study with more detail. In the development of this work the calculus tools were the codes: INTREPIN-3, CASMO-4, CMSLINK and SIMULATE-3. (Author)

  10. Mechanical design and fabrication of a heat exchanger. Report of the design and construction of a heat exchanger which will be used in 'Experimental analysis of heat transfer in the boiling in forced convection; Diseno mecanico y fabricacion de un intercambiador de calor. Reporte del diseno y construccion de un intercambiador de calor que sera usado en 'Analisis experimental de transferencia de calor en la ebullicion en conveccion forzada

    Energy Technology Data Exchange (ETDEWEB)

    Mariano H, E

    1991-08-15

    To continue with the equipment of the thermal hydraulics laboratory, it was designed thermal and mechanically an heat exchanger, to satisfy the requirements to have circuit that allows to carry out heat transfer experiments. The heat exchanger was manufactured and proven in the workshops of the Prototypes and Models Management, and it is expected that to obtain the foreseen results once completely installed the circuit, in the laboratory of thermal hydraulics of the Management of Nuclear Systems. (Author)

  11. Mechanical design and fabrication of a heat exchanger. Report of the design and construction of a heat exchanger which will be used in 'Experimental analysis of heat transfer in the boiling in forced convection; Diseno mecanico y fabricacion de un intercambiador de calor. Reporte del diseno y construccion de un intercambiador de calor que sera usado en 'Analisis experimental de transferencia de calor en la ebullicion en conveccion forzada

    Energy Technology Data Exchange (ETDEWEB)

    Mariano H, E

    1991-08-15

    To continue with the equipment of the thermal hydraulics laboratory, it was designed thermal and mechanically an heat exchanger, to satisfy the requirements to have circuit that allows to carry out heat transfer experiments. The heat exchanger was manufactured and proven in the workshops of the Prototypes and Models Management, and it is expected that to obtain the foreseen results once completely installed the circuit, in the laboratory of thermal hydraulics of the Management of Nuclear Systems. (Author)

  12. Resources of thermal control in vernacular houses of North of Mexico and Peru. A comparative analysis; Recursos de control termico en viviendas vernaculas del Norte de Mexico y Peru. Un analisis comparativo

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero, Luis F. [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D.F.(Mexico)

    2000-07-01

    ponencia se presentan los resultados de un analisis comparativo realizado entre viviendas prehispanicas y vernaculas de los alrededores de la ciudad de Trujillo, Peru y de Casas Grandes en Chihuahua, Mexico, con la finalidad de identificar las caracteristicas formales, funcionales y materiales que permitieron su adaptacion termica a medios geograficos con climas hostiles, resultado de su localizacion en zonas deserticas. Sin que haya existido contacto alguno entre las culturas historicas y vernaculas que se desarrollaron desde hace casi dos mil anos en el Valle de Moche y el Valle de Casas Grandes, se han generado una serie de respuestas arquitectonicas con notables coincidencias en su eficacia para integrarse a las extremosas condiciones climaticas imperantes. Entre estas respuestas es posible destacar la utilizacion de la tierra como material de construccion, la masividad de las estructuras, orientacion geografica, pendientes de techos, dimensiones de sus locales, formas de agrupacion, tipos de ventanas, espacios abiertos, parasoles, pergolas y celosias, entre otros recursos de diseno. Sin embargo, con el paso del tiempo una parte importante de los conocimientos que fundamentaban estas formas de adaptacion al medio fueron perdiendose y se transformo la arquitectura para dar pie a una tradicion vernacula cuyas caracteristicas han resultado ser cada vez menos eficientes. Lo mas grave de esta tendencia es que en anos recientes, a consecuencia de la incorporacion de sistemas constructivos ajenos, la arquitectura local ha ido degenerando hasta perder casi totalmente los rasgos que apoyaban su integracion al medio circundante, transformandose en espacios con un confort termico nulo. El analisis no solo permite valorar los elementos arquitectonicos identificados para promover su conservacion como testimonio historico, sino fundamentalmente como fuente para el diseno de soluciones habitacionales que en el presente y el futuro recuperen la sabiduria ancestral.

  13. The daylight alternative for energy conservation saving in lighting systems; La luz natural alternativa para el ahorro de energia en sistemas de iluminacion

    Energy Technology Data Exchange (ETDEWEB)

    Escutia Perez, A.; Cruz Mendez, E. P. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico D. F. (Mexico); Buitron Sanchez, H. [Programa de Ahorro de Energia del Sector Electrico, Mexico D. F. (Mexico)

    1995-12-31

    The technological advances generate far reaching changes in all types of installation. The new spaces and the existing ones justify the introduction of new technologies taking into account important economic considerations, mostly when the advantage of daylight is taken into consideration in industrial and commercial lighting. In the daylight design it is necessary to know the solar transit, the atmospheric conditions, the architectural design of the building, the materials and the control elements, etc. to apply with precision the calculation method. The fundamental lighting technic have varied little. In the greatest part of commerces and industries the general lighting is used, that produces an illumination more or less uniform on the working areas, which guarantees a total freedom for the placement of machinery, working benches, racks, exhibitors, clothes racks, etc.. This type of lighting is obtained by means of the use of a more or less regular series of skylights. The adequate localized lighting is used in those zones where because of the presence of obstructions or unfavorable slant of the working plan are not sufficiently well lighted by the general lighting system. The daylight use in accordance with the every moment availability will permit in many working centers a sensible diminution of the artificial lighting time, provided that the characteristics of the control operation of the installation permit it, along with modern controlling devices and the great variety of efficient saving lamps. [Espanol] Los avances tecnologicos generan cambios trascendentes en todo tipo de instalacion. Los nuevos espacios y los ya existentes justifican la introduccion de nuevas tecnologias teniendo consideraciones economicas importantes, sobre todo cuando se aprovecha la luz natural en sistemas de alumbrado industrial y comercial. En el diseno de iluminacion natural, es necesario tener el conocimiento del transito solar, las condiciones atmosfericas, el diseno

  14. The daylight alternative for energy conservation saving in lighting systems; La luz natural alternativa para el ahorro de energia en sistemas de iluminacion

    Energy Technology Data Exchange (ETDEWEB)

    Escutia Perez, A; Cruz Mendez, E P [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico D. F. (Mexico); Buitron Sanchez, H [Programa de Ahorro de Energia del Sector Electrico, Mexico D. F. (Mexico)

    1996-12-31

    The technological advances generate far reaching changes in all types of installation. The new spaces and the existing ones justify the introduction of new technologies taking into account important economic considerations, mostly when the advantage of daylight is taken into consideration in industrial and commercial lighting. In the daylight design it is necessary to know the solar transit, the atmospheric conditions, the architectural design of the building, the materials and the control elements, etc. to apply with precision the calculation method. The fundamental lighting technic have varied little. In the greatest part of commerces and industries the general lighting is used, that produces an illumination more or less uniform on the working areas, which guarantees a total freedom for the placement of machinery, working benches, racks, exhibitors, clothes racks, etc.. This type of lighting is obtained by means of the use of a more or less regular series of skylights. The adequate localized lighting is used in those zones where because of the presence of obstructions or unfavorable slant of the working plan are not sufficiently well lighted by the general lighting system. The daylight use in accordance with the every moment availability will permit in many working centers a sensible diminution of the artificial lighting time, provided that the characteristics of the control operation of the installation permit it, along with modern controlling devices and the great variety of efficient saving lamps. [Espanol] Los avances tecnologicos generan cambios trascendentes en todo tipo de instalacion. Los nuevos espacios y los ya existentes justifican la introduccion de nuevas tecnologias teniendo consideraciones economicas importantes, sobre todo cuando se aprovecha la luz natural en sistemas de alumbrado industrial y comercial. En el diseno de iluminacion natural, es necesario tener el conocimiento del transito solar, las condiciones atmosfericas, el diseno

  15. Behavior of high efficiency electric motors; Comportamiento de motores electricos de alta eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Bonett, Austin H. [IEEE, (United States)

    2001-09-01

    The energy efficiency is one of the main parameters in the design of the industrial motors of general purpose; nevertheless, it is avoided that it is at the cost of the reliability or to the global performance of the motor. Exist user groups of this equipment that consider that, in the search of a greater efficiency, the useful life period is diminished and the characteristics of operation of the motor are affected. During the past last years, the author has studied the aspects of quality and reliability, as well as the operative advantages of the high efficiency motors and written down the increasing interest for these aspects. Also he has detected that a great number of users has realized that, additionally to the obvious energy saving, the efficient motor offers a greater reliability and a longer useful life in most of the industrial applications. The objective of this article is to present the differences in the quality levels, reliability and operation parameters of high efficiency squirrel cage type electrical motors with those of the motors of standard manufacture. [Spanish] La eficiencia energetica es uno de los principales parametros en el diseno de los motores industriales de proposito general; sin embargo, se evita que sea a costa de la confiabilidad o del desempeno global del motor. Existen grupos de usuarios de estos equipos que consideran que, en la busqueda de una mayor eficiencia, se disminuye el periodo de vida util y se afectan las caracteristicas de operacion del motor. Durante los ultimos anos, el autor ha estudiado los aspectos de calidad y confiabilidad, asi como las ventajas operativas de los motores de alta eficiencia y anotado el incremento del interes por estos aspectos. Tambien ha detectado que un gran numero de usuarios se ha dado cuenta que, adicionalmente a los obvios ahorros de energia, el motor eficiente ofrece una mayor confiabilidad y una vida util mas larga en la mayoria de las aplicaciones industriales. El objetivo de este

  16. Energy saving in the house of social interest by means of the application of the power efficiency standard:NOM-020; Ahorro de energia en la vivienda de interes social mediante la aplicacion de la norma de eficiencia energetica: NOM-020

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Jimenez, Rodolfo; Morillon Galvez, David [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2001-07-01

    In face of the urgent necessity of saving and of using in an efficient way the energy, the Secretariat of Energy (Sener) through the Comision Nacional para el Ahorro de Energia, (CONAE) (National Commission for Energy Saving) has promoted the design and application of different measures and programs of energy efficiency. The elaboration of standards of energy efficiency has been a subject of great importance to foment the adequate use of the energy resources. For the residential sector the standard first draft exists: NOM-020-ENER-1998 energy efficiency in constructions: Standard for the covering of buildings for housing up to three floors. In this study the thermal analysis of the cover of one of the house models more used in the construction of houses of social interest in Mexico. By applying the methodology proposed by the first draft of the Standard the thermal gains by conduction in roof and walls, and by radiation in windows were determined. The analysis was performed for several cities of the country with different climates, the results were compared with the values proposed in the Standard, the viability of application of this Standard in the sector of the house of social interest was analyzed and finally the energy saving in ceasing using air conditioning systems for interiors. [Spanish] Ante la imperiosa necesidad de ahorrar y usar de forma eficiente la energia, la Secretaria de Energia (Sener) a traves de la Comision Nacional para el Ahorro de Energia, (CONAE) ha promovido el diseno y aplicacion de diferentes medidas y programas de eficiencia energetica. La elaboracion de normas de eficiencia energetica ha sido un rubro de gran importancia para fomentar el uso adecuado de los recursos energeticos. Para el sector residencial existe el anteproyecto de norma: NOM-020-ENER-1998 ficiencia energetica en edificaciones: Norma para la envolvente de los edificios para uso habitacional hasta de tres pisos. En este estudio se presenta el analisis termico de la

  17. Deterministic tsunami hazard assessment of Sines - Portugal

    OpenAIRE

    Wronna, Martin

    2015-01-01

    Tese de mestrado em Ciências Geográficas, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2015 Neste trabalho apresenta-se uma abordagem determinística de perigo de tsunamis considerando múltiplas fontes para a cidade costeira de Sines, Portugal. Tsunamis ou maremotos são eventos extremos, energeticamente elevados mas pouco frequentes. Normalmente são geradas por um deslocamento duma grande quantidade de água seja por erupções vulcânicas, colapso de caldeiras, desli...

  18. Effect of efficient microorganisms on cation exchange capacity in acacia seedlings (Acacia melanoxylon) for soil recovery in Mondonedo, Cundinamarca; Accion de microorganismos eficientes sobre la actividad de intercambio cationico en plantulas de acacia (Acacia melanoxylon Burret) para la recuperacion de un suelo del municipio de Mondonedo, Cundinamarca.

    Energy Technology Data Exchange (ETDEWEB)

    Olga Angelica, Diaz Barragan; Diana Mercedes, Montero Robayo; Jesus Alberto, Lagos Caballero

    2009-07-01

    We determined the effect of efficient microorganisms (EM) on the cation exchange capacity for soil recovery in the municipality of Mondonedo, Cundinamarca. A greenhouse unit was installed in order to maintain stable conditions. After harvesting, sifted and homogenization of the soil sample, initial physical and chemical analyses were made. For the experimental units we used Acacia melanoxylon seedlings from Zabrinsky. A completely randomized design was done with eight treatments and three repetitions. For the maintenance and monitoring of the seedlings behaviour, a frequency of irrigation of three times per week was found. The application of the EM was done during three months: in the first month, it was applied four times (once a week); during the second month, it was applied twice (biweekly), and during the third month there was only one application. Additionally, every 15 days morphological analyses were made (number of leaves, branches and stem diameter). In the end, soil samples were taken from each plant pot. In the laboratory we analysed the cation exchange capacity, alkali ion exchange, saturation alkali, relations between elements and plant tissue. These were done using an atomic absorption spectrophotometer. Statistical analyses consisted on multiple comparisons test and variance tests, in order to find whether or not treatments exhibited significant differences. In that way, the best alternative for improving environmental quality of eroded soils as the Zabrinsky desert is the efficient microorganisms in 5% doses in irrigation water. Additionally, the cation exchange capacity must be enhanced using organic fertilizers (compost, mulch and gallinaza) in one pound doses, and chemical fertilizers: electrolytic Mn (0.0002 g), Cu (0.0002 g), Zn (0.0001 g), URFOS 44 (166.66 g) and klip-boro (5 g).

  19. Produção de substratos sers eficientes através da deposição de ouro sobre um molde de microesferas de poliestireno Production of efficient sers substrates by depositing gold over a polystyrene beads template

    Directory of Open Access Journals (Sweden)

    Diego Pereira dos Santos

    2010-01-01

    Full Text Available This work reports on the SERS activity of a nanostructured substrate that was obtained by electrodepositing gold over a template consisting of polystyrene microspheres. This substrate displayed superior SERS performance for the detection of 4-merctaptopyridine as compared to a conventional roughened Au electrode. In order to investigate the substrate capability for the detection at low concentration limits, a series of Rhodamine 6G (1 nM spectra were registered. Our spectral dynamics data is in agreement with single-molecule behavior, showing that the control over the substrate morphology is crucial to enable the production of highly reproducible and sensitive SERS substrates.

  20. Análisis del índice de morosidad en la cartera de créditos del iece-guayaquil y propuesta de mecanismos de prevención de morosidad y técnicas eficientes de cobranzas

    OpenAIRE

    Parrales Ramos, Carlos

    2013-01-01

    El desarrollo del trabajo está enfocado en el análisis del índice de morosidad del Instituto Ecuatoriano de Crédito Educativo y Becas de Guayaquil, para que a partir de ésta investigación se puedan generar estrategias que permitan prevenir la morosidad y establecer técnicas de cobranzas efectivas. Con corte a abril/2012, el índice de morosidad de la banca pública ecuatoriana fue de 8.22%, mientras que el del IECE-Guayaquil, fue de 12.13%. Como parte de la investigación se analizó cómo se mane...

  1. Expressão eficiente do gene reporter beta-glucuronidase nos tecidos vasculares de batata (Solanum tuberosum L. utilizando de um promotor específico (BRA3 de Agrobacterium rhizogenes Efficient expression of beta-glucuronidase reporter gene in vascular tissue of potato (Solanum tuberosum L. utilizing a specific promoter (BRA3 from Agrobacterium rhizogenes

    Directory of Open Access Journals (Sweden)

    Antonio Carlos Torres

    2003-06-01

    Full Text Available Promotores tecido-específico controlam a transcrição de genes em diferentes tecidos vegetais bem como em diferentes estádios de desenvolvimento da planta, levando à indução de distintos níveis de atividade transiente e/ou estável do gene. Tais promotores podem ser empregados para a expressão seletiva de genes de interesse. O promotor rol A de Agrobacterium rhizogenes, por exemplo, é floema-específico, sugerindo que possa ser empregado em estratégias de defesa de plantas que são infectadas por vírus com replicação restrita ao floema. A expressão do gene marcador da ß-glucuronidase (gus dirigido pelo promotor rol A (pBRA3 foi observada em plantas transgênicas de batata (cvs. Macaca e Baronesa. Entrenós e secções de folhas foram submetidos ao cocultivo com A. tumefaciens. A atividade do gene gus avaliada em brotações resistentes à canamicina não se restringiu ao floema (alto nível de expressão do gene, mas também se manifestou no xilema dos caules. As expressões transiente e estável são, no entanto, tecido-específicas, localizadas sobretudo no sistema vascular de entrenós e ausente em raízes e folhas. As plantas gus positivas foram micropropagadas, plantadas em casa de vegetação e avaliadas por PCR, utilizando-se 'primers' específicos para o gene npt II. Nenhuma alteração fenotípica foi observada em plantas transgênicas, em relação às não transformadas.Tissue-especific promoters allow the modulation of gene transcription in different tissue types as well as in different stages of plant development, leading different levels of transient and stable activity of the gene product. These promoters have been employed for selective gene expression. The Agrobacterium rhizogenes rol A gene promoter (BRA3 controls phloem-specific expression indicating that this promoter might have an important role in plant defense strategies against virus which replicated only in the phloem. The expression of ß-glucuronidase (gus activity drived by BRA3 promoter was observed in transgenic potato plants (cvs Macaca and Baronesa. Entrenodes and leaf explants were infected and cocultivated with A. tumefaciens. The regeneration of putative transformants was in medium with 50 mg.L-1 of kanamycin. High frequency of transformants based upon kanamycin resistance and gus expression was obtained. All gus positive plants showed blue staining in vascular bundle (phloem and xylem. PCR analysis showed the amplification of npt II. No conspicuous phenotipic alteration was observed when comparing transgenic vs non-transgenic plants.

  2. Theoretical model to determine the energy behavior of test modules at scale of constructions for the efficient use of energy; Modelo teorico para determinar el comportamiento energetico de modulos de prueba a escala de edificaciones para el uso eficiente de la energia

    Energy Technology Data Exchange (ETDEWEB)

    Acoltzi, Higinio; Alvarez, Gabriela [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    In this work a theoretical model of the energy behavior of test modules and its experimental verification is presented. The model determines the history of electrical energy consumption to maintain the comfort conditions in the interior of the modules, with respect to the variation of the materials of ceilings and windows with the purpose of establishing criteria of application of these materials in the construction industry. The measured results of the consumption of the accumulated energy are presented. [Spanish] En este trabajo se presenta un modelo teorico del comportamiento energetico de modulos de prueba y su verificacion experimental. El modelo determina la historia del consumo de energia electrica para mantener las condiciones de confort al interior de los modulos, respecto a la variacion de los materiales de los techos y ventanas, con el objeto de establecer criterios de aplicacion de dichos materiales en la industria de la edificacion. Se presentan los resultados medidos del consumo de energia acumulada.

  3. Integração entre curvas de permanência de quantidade e qualidade da água como uma ferramenta para a gestão eficiente dos recursos hídricos Integration between cumulative frequency curves for water quantity and quality as a tool for effective water resources management

    Directory of Open Access Journals (Sweden)

    Davi Gasparini Fernandes Cunha

    2012-12-01

    Full Text Available A garantia dos usos múltiplos da água, dos serviços ambientais e do equilíbrio ecológico depende de uma combinação adequada entre aspectos quantitativos e qualitativos dos rios. A presente pesquisa descreve aplicações de uma nova abordagem das curvas de permanência de vazões, que foram associadas a curvas de frequência acumulada de qualidade da água. Foram compilados dados de fósforo total (2005 a 2009 e vazão média mensal (1959 a 2003 dos rios Paraíba do Sul e Sorocaba para ilustrar o conceito. A integração entre as curvas de quantidade e qualidade se mostrou desejável por oferecer subsídios a concessões de outorga, à cobrança pelo uso da água, ao monitoramento ambiental e ao enquadramento dos cursos de água. Outro aspecto positivo é que essas curvas podem incorporar variações no clima e no uso e ocupação do solo, o que permite o estabelecimento de cenários ambientais.The security of the different water uses, environmental services and ecological balance depends upon a well-weighted combination between quantitative and qualitative aspects in rivers. This research describes applications of a new approach of the frequency curves for discharge, which were associated with frequency curves for water quality. Data on total phosphorus (2005 to 2009 and monthly average flow (1959 to 2003 from the Paraíba do Sul and Sorocaba Rivers were compiled to further illustrate the concept. The integration between the curves of water quantity and quality was considered desirable as it can aid in the planning of water concessions, charging for water uses, environmental monitoring and establishment of water quality standards and framework. Moreover, these curves can accommodate variations in climate and land use, allowing the establishment of environmental scenarios

  4. Software for calculation the number of lamps, luminaries and its distribution in the environment aiming the efficient use of electric power; Software para o calculo do numero de lampadas, luminarias e da distribuicao no ambiente visando o uso eficiente da energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Teofilo Miguel de; Bianchi, Inacio [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil). Dept. de Engenharia Eletrica. Centro de Energias Renovaveis], e-mail: teofilo@feg.unesp.br, e-mail: ibianchi@feg.unesp.br

    2004-07-01

    In Brazil artificial lighting contributes with expressive value to electric power consumption. Good performance of lighting system depends of criterion fixed on the electric design conception that takes into account the information about lamps, environment and type of work carried on the local. This paper presents an easy of use and low computational requirements software used to choice lamps, fixtures and its lay-out aiming a good and efficient illumination system design. Its textual format results are displayed at the video monitor, and stored in files, and can be printed and attached to the technical memorial report. So, a presentation of several design options can be furnished quickly through the software for an economic pre-analysis of illumination design. (author)

  5. The perspectives of cogeneration as a mechanism to implement the rational and efficient use of energy in the industrial, residential and commercial sectors for the next decade; As perspectivas da cogeracao como mecanismo de implementacao do uso racional e eficiente de energia, nos setores industrial, residencial e comercial para a proxima decada

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Liodoro de; Santos, Adilson Francisco dos; Domingos, Sergio Ricardo; Haddad, Jamil [Universidade Federal de Itajuba (UNIFEI), Itajuba, MG (Brazil). Grupo de Estudos Energeticos], e-mail: mellostopa@pop.com.br

    2004-07-01

    The present work analyzes the advantages of the use of the cogeneration combined 'production of electricity and useful heat', and 'his/her correlation with the rational and efficient use of energy in Brazil in the systems: industrial, residential and commercial.' In the measure of adoptions of new energy politics the proposed system presents comparative advantages in relation to other renewable sources or not of energy. Lens to improve the factor capacity and to minimize the wastes, specifically in the final uses. The crisis of provisioning that devastated the country in 2001 serves as alert for all of the agents of the electric section. The society forced to adopt use procedures and to reuse of the consumed energy, under penalty of sanctions, from the application of fines, until the interruption of the supply she enters in a new phase, for yours, time the theme rational and efficient use of energy assumes extremely important and decisive paper of the politics of administration of the scarce energy inputs. With base in these data the cogeneration appears, as real and viable alternative, that it gets to conjugate the efficient use of the energy with advantages environmental, technological and, above all, economical contributing with the energy planning. (author)

  6. Fatores de risco para a não adesão ao tratamento com terapia antiretroviral altamente eficaz Factores de riesgo para la no-adherencia al tratamiento con terapia anti-retroviral altamente eficiente Risk factors for non-compliance to treatment with highly effective antiretroviral therapy

    Directory of Open Access Journals (Sweden)

    Maria Rosa Ceccato Colombrini

    2008-09-01

    Full Text Available O estudo objetivou: mensurar a prevalência de não-adesão à terapia anti-retroviral altamente eficaz (HAART em pacientes com AIDS; identificar se alguns fatores relacionados na literatura estavam associados com a não-adesão; estabelecer o valor preditivo dos fatores associados à não-adesão à HAART. Foi realizado um estudo analítico de prevalência (N=60. Foram considerados os três dias anteriores à entrevista e os pacientes classificados como aderentes quando ingeriam 95% ou mais do total de comprimidos prescritos por dia. A adesão foi de 73,3%. A análise de regressão logística multivariada indicou que indivíduos da raça negra apresentaram 6,48 vezes mais risco de não-adesão; aqueles que apresentaram ausência de efeito colateral tiveram um risco 7,6 vezes maior, e a cada comprimido ingerido o risco foi de 1,12. A adesão observada foi maior que a encontrada na literatura. Os fatores sociodemográficos e culturais podem interferir na adesão à HAART.Objetivo del estudio: medir la prevalencia por falta de seguimiento al tratamiento anti-retroviral altamente eficaz (HAART en pacientes con SIDA; identificar si algunos factores relacionados en la bibliografía se encuentran asociados con la falta de seguimiento; establecer el valor preditivo de los factores asociados con la falta de seguimiento al HAART. Para lo cual fue realizado un estudio analitico de prevalencia (N=60, considerándose los tres días anteriores a la entrevista, donde aquellos pacientes con ingesta del 95% o más del total de comprimidos prescritos por día eran clasificados como seguidores del tratamiento. El seguimiento fue de 73,3%. El análisis de regresion logística multi-variable mostró que sujetos de raza negra presentaron 6,48 veces mayor riesgo de no continuar con el tratamiento; aquellos individuos sin efectos colaterales tuvieron un riesgo 7,6 veces mayor, asimismo, cada comprimido ingerido produjo un riesgo de 1,12. El seguimiento observado fue mayor al encontrado en la bibliografía existente. Los factores socio-demográficos y culturales pueden influir en el seguimiento de la HAART.The purpose of the study was: to measure the prevalence of non-compliance to highly active antiretroviral therapy(HAART by AIDS patients; to identify whether some of the factors listed in health literature were associated with non-compliance; to establish the predictive values of non-compliance to HAART-related factors. An analytic prevalence study (N=60 was performed, in which the three days prior to the interview were considered. Those classified as compliant were the patients who ingested 95% or over of the total amount of pills prescribed a day. Compliance appeared as 73.3%. The multivariate logistic regression analysis indicated that the black subjects presented 6.48 times higher risk for non-compliance. Those who did not present side effects showed 7.6 times higher risk, and a risk of 1.12 for each pill taken. The compliance observed in the study proved to be higher than in literature. The sociodemographic and cultural factors may interfere in the compliance with HAART.

  7. Electro-economic, environmental and social consequences in the efficient abatement of a hydroelectric plant (C. H. Santa Rosa, CFE-ACO); Consecuencias electro-economicas, ambientales y sociales del abatimiento eficiente de una central hidroelectrica (C. H. Santa Rosa, CFE-ACO)

    Energy Technology Data Exchange (ETDEWEB)

    Narvaez Perez, Camilo; Garcia Conejo, Dante Aristoteles [Comision Federal de Electricidad, Centro Nacional de Control de Energia, Area de Control Occidental, Zapopan, Jalisco (Mexico)]. E-mail: camilo.narvaez@cfe.gob.mx; camilo.narvaez@univa.mx; Narvaez Perez, Claudia Universidad de Guadalajara, Zapopan, Jalisco [Mexico]). E-mail: claudia_narvaez@hotmail.com; Blanco Gomez, Cesar Eduardo [Comision Federal de Electricidad, Centro Nacional de Control de Energia, Area de Control Occidental, Zapopan, Jalisco (Mexico)

    2013-03-15

    Renewable energy systems, like hydroelectric generation system gives electric energy, in reliable economic, it takes care with environment, and growths the society, if the hydroelectric dam is suitably drained in non rainy season, if we consider, flow rate in its river, rain, thunderstorms and floods, dam's size, load shape per day, generators capacity unit and the flow in turbines, generating units maintenance and other necessities like irrigation crops in farms. In this research we propose a new methodology about hydroelectric dam drained in non rainy season. But in rainy season, you can consider this methodology with few changes and you would obtain satisfactory results. The methodology is used since 2010 in the Area de Control Occidental in the Comision Federal de Electricidad with results compared with data from previous years, in which different methodologies were applied. [Spanish] Los sistemas de energias renovables, como los complejos hidroelectricos impactan de manera electrica, economica, ambiental y social, siempre y cuando se realice adecuadamente el abatimiento de la presa en el estiaje, considerando, el aporte del cauce, las lluvias aun siendo escasas, el tamano del embalse, la demanda horaria de la carga abastecida, el tamano de los generadores y su gasto turbinado, los mantenimientos de las unidades, las necesidades hidraulicas aguas abajo y demas imponderantes. En esta investigacion se propone una metodologia de abatimiento de presas de centrales hidroelectricas en estiaje. Y para tiempo de lluvias se aplica la metodologia con variantes pequenas y con resultados satisfactorios. La metodologia es utilizada desde el 2010 en el Area de Control Occidental de la Comision Federal de Electricidad, con resultados comparados con los datos de los anos anteriores, en los cuales se aplicaron metodologias diversas.

  8. La enseñanza virtual de imágenes clínicas, tutorizada mediante correo electrónico, es más eficiente que la enseñanza tradicional On-line learning with e-mail tutoring for clinical images is more efficient than traditional teaching methods

    Directory of Open Access Journals (Sweden)

    R.A. Fernández de la Puebla-Giménez

    2008-03-01

    Full Text Available Introducción. La enseñanza de la patología médica a través de imágenes es clave para conseguir habilidad clínica en el diagnóstico. Objetivos. Comparar la eficacia docente de un método de enseñanza basado en imágenes en un ‘entorno no presencial' frente a la enseñanza tradicional en un ‘entorno presencial', y evaluar el grado de satisfacción del alumno sobre este método de innovación docente en la enseñanza de la patología médica. Materiales y métodos. El estudio se realizó durante el curso 2005-2006 entre 62 alumnos de Patología médica, de la Facultad de Medicina de Córdoba. Se compararon los dos métodos de enseñanza: el presencial (en cada seminario se expusieron verbalmente 15 imágenes y el no presencial (imágenes clínicas expuestas en la página web de la Facultad de Medicina con tutorización a través del correo electrónico. La evaluación consistió en la valoración clínica de 16 imágenes (ocho imágenes de cada modelo de enseñanza. Se comparó la puntuación del examen teórico con la de las imágenes clínicas. Tras el examen fi-nal, el alumno realizó un cuestionario de evaluación. Resultados. La calificación media final de las imágenes (sobre 10 puntos fue de: 6,8 ± 1,5 y la del test (sobre 10 puntos fue de 7,3 ± 0,9. La calificación media de las imágenes expuestas en la web (7,4 ± 1,6 fue superior a la del modelo presencial (6,3 ± 1,7 p Introduction. The teaching of Internal Medicine through images is the key for the achievement of clinical skills in the diagnosis. Aims. To compare the efficiency of a teaching method based on images in a face-to-face learning situation with the traditional teaching methods, and to evaluate the degree of satisfaction amongst the alumni regarding the new teaching method within the Internal Medicine. Materials and methods. The study was carried out throughout the academic year 2005/06 amongst 62 Internal Medicine students in the School of Medicine in Córdoba. Two teaching methods were compared: (i face-to-face -15 images were exposed in workshops, and (ii distance- clinical images were exposed at the School of Medicine web site through a tutorial system based on e-mail. The evaluation consisted in a clinical evaluation of 16 images -8 images for each teaching method. The results from the multiple choice exam and the clinical images exam were also compared. Finally, students answered an assessment questionnaire. Results. The final average qualification -out of 10- for the images was: 6.8 ± 1.5 and for the multiple choice exam -out of 10- was 7.3 ± 0.9. The average qualification was higher for the images exposed at the web site than for the face-to-face model: (7.4 ± 1.6 vs (6.3 ± 1.7 p < 0.0001. There was a correlation between the total punctuation for the images and the examination (r: 0.584, p < 0.0001. Moreover, there was also a correlation between the qualification obtained for the images in the face-to-face method and the images exposed on-line (r: 0.697, p < 0.0001. Conclusions. Qualifications for the cases displayed on the website were higher than those for the cases exposed on the face-to-face workshops. In addition to this, students had a very positive opinion regarding the new teaching method for Internal Medicine based on clinical images.

  9. IDENTIFICACIÓN EFICIENTE DE ERRORES EN ESTIMACIÓN DE ESTADO USANDO UN ALGORITMO GENÉTICO ESPECIALIZADO IDENTIFICAÇÃO EFICAZ DOS ERROS EM ESTIMATIVA DE ESTADO USANDO UM ALGORITMO GENÉTICO ESPECIALIZADO EFFICIENT IDENTIFICATION OF ERRORS IN STATE ESTIMATION THROUGH A SPECIALIZED GENETIC ALGORITHM

    Directory of Open Access Journals (Sweden)

    Hugo Andrés Ruiz

    2012-06-01

    Full Text Available En este artículo se presenta un método para resolver el problema de estimación de estado en sistemas eléctricos usando optimización combinatoria. Su objetivo es el estudio de mediciones con errores de difícil detección, que afectan el desempeño y calidad de los resultados cuando se emplea un estimador de estado clásico. Dada su complejidad matemática, se deducen indicadores de sensibilidad de la teoría de puntos de apalancamiento que se usan en el algoritmo de optimización de Chu-Beasley, con el fin de disminuir el esfuerzo computacional y mejorar la calidad de los resultados. El método propuesto se valida en un sistema IEEE de 30 nodos.Neste artigo apresenta-se um método para resolver o problema de estimativa de estado em sistemas elétricos usando otimização combinatória. Seu objetivo é o estudo de medidas com erros de difícil detecção, que afetam o desempenho e qualidade dos resultados quando se emprega um estimador de estado clássico. Dada sua complexidade matemática, deduzem-se indicadores de sensibilidade da teoria de pontos de alavancagem que se usam no algoritmo de otimização de Chu-Beasley, com o fim de diminuir o esforço computacional e melhorar a qualidade dos resultados. O método proposto se valida em um sistema IEEE de 30 nós.In this paper a method to solve the state estimation problem in electric systems applying combinatorial optimization is presented. Its objective is the study of measures with difficult detection errors, which affect the performance and quality of the results when a classic state estimator is used. Due to the mathematical complexity, sensibility indicators are deduced from the theory of leverage points used in the Chu-Beasley optimization algorithm with the purpose of reducing the computational effort and enhance the quality of the results. The proposed method is validated in a 30-node IEEE system.

  10. Estratégias fenológicas de Senna cana (Nees & Mart. H.S. Irwin & Barneby (Fabaceae: Caesalpinioideae como mecanismo eficiente para atração de polinizadores Phenological strategies of Senna cana (Nees & Mart. H.S. Irwin & Barneby (Fabaceae: Caesalpinioideae as efficient mechanisms for attracting pollinators

    Directory of Open Access Journals (Sweden)

    Isys Mascarenhas Souza

    2012-06-01

    Full Text Available Este trabalho verificou a importância das estratégias fenológicas de Senna cana na atração de visitantes e polinizadores na mata ciliar do rio Lençóis, Chapada Diamantina, Bahia. As observações fenológicas foliares (queda foliar e brotamento e reprodutivas (botão, flor, fruto imaturo e fruto maduro foram mensais (18 meses em 10 indivíduos marcados. Para a biologia floral observou-se: antese, duração das flores, receptividade estigmática, viabilidade polínica, presença de osmóforos e pigmentos que refletem raios ultravioleta. Foram realizados testes de autopolinização manual, espontânea e polinização cruzada. Os visitantes e polinizadores foram determinados observando-se: horário, duração, freqüência das visitas e comportamento de forrageio. Senna cana é uma espécie perenifólia episódica, com eventos reprodutivos sazonais e altamente sincrônicos (floração intermediária no período chuvoso e frutificação longa no período seco. Tais características na floração, somadas à síndrome de melitofilia, configuram importantes estratégias para atração de visitantes florais, dentre os quais Xylocopa frontalis e X. grisescens foram classificadas enquanto potenciais polinizadores. A autoincompatibilidade e o máximo de frutos produzidos após polinização cruzada são mecanismos reprodutivos favorecidos pelas estratégias fenológicas e síndrome de polinização apresentadas pela espécie.The present work evaluated the importance of the phenological strategies of Senna cana in attracting floral visitors and pollinators in an riparian forest along the Lençóis River, in Chapada Diamantina, Bahia, Brazil. Vegetative and reproductive phenological observations (leaf fall, leaf flushing, flowering, and fruiting were made on a monthly basis among a group of 10 individuals. The floral biology patterns observed included: anthesis, duration of the flowers, stigma receptivity, pollen viability, and the presence of osmophores and pigments that reflect UV light. Reproductive mechanisms were examined by testing manual and natural self-pollination as well as cross-pollination. Visitors and pollinators were identified, and the time, duration, and frequency of their visitation, as well as their behavior, were noted. Senna cana is an episodic evergreen species showing seasonal and highly synchronous reproductive events (intermediate flowering after a rainy period, and long fruiting during the dry period. These flowering characteristics, in addition to the syndrome of melittophily, are important strategies for attracting floral visitors (including Xylocopa frontalis and X. grisescens, which are potential pollinators. The self-incompatibility and maximization of fruit production through cross-pollination represent reproductive mechanisms favored by the phenological strategies and the pollination syndrome demonstrated by this species.

  11. Aproximación inicial de un modelo eficiente y sostenible de gestión de los residuos de la construcción y demolición RCD en la ciudad de Bogotá DC-Colombia

    OpenAIRE

    Cubillos Rojas, Néstor Raúl

    2017-01-01

    La construcción es uno de los ejes estructurales de las economías mundiales, por lo tanto se constituye en sector determinante para el desarrollo y evolución continua de las ciudades, por esta razón, para generar un cambio en los hábitos y adaptabilidad de los ocupantes de las urbes obligatoriamente se debe intervenir el territorio; intervención que trae consigo múltiples afectaciones en su mayoría medio ambientales. En Bogotá, siendo la capital de Colombia, es la ciudad de mayor crecimien...

  12. Li-promoted sodium zirconate as a CO{sub 2} absorbent at high temperatures; Zirconato de sodio promovido con Li como absorbente de CO{sub 2} a alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Guzman Velderrain, V.; Barraza Jimenez, D.; Lardizabal Gutierrez, D.; Delgado Vigil, D.; Salinas Gutierrez, J.; Lopez Ortiz, A.; Collins-Martinez, V. [Centro de Investigacion en Materiales Avanzados S. C., Chihuahua, Chihuahua (Mexico)]. E-mail: virginia.collins@cimav.edu.mx

    2009-09-15

    structures of the type Na{sub 4}ZrO{sub 4}, which are responsible for the increase in the absorption capacity. [Spanish] En los procesos de produccion de hidrogeno a partir de combustibles fosiles, la captura de CO{sub 2} a alta temperatura ha alcanzado un papel esencial al convertir estos, en procesos energeticamente mas eficientes. Un ejemplo es el reformado de metano de vapor mejorado con absorcion (SER), donde la captura de CO{sub 2} a alta temperatura (600 grados centigrados) provee ahorros en energia ({approx_equal} 23%) sobre el proceso convencional de reformacion (SMR). Parte importante de este concepto es el absorbente solido de CO{sub 2}, el cual debe presentar una adecuada capacidad de absorcion y rapidas cineticas de absorcion/regeneracion. Recientemente, se han desarrollado absorbentes de CO{sub 2} sinteticos que consisten en mezclas de oxidos base-Li. Estudios previos realizados en nuestro laboratorio, reportan que el zirconato de sodio (Na{sub 2}ZrO{sub 3}) presenta propiedades de absorcion/regeneracion superiores a los oxidos base-Li. El presente trabajo tiene como objetivo aumentar la capacidad de absorcion del Na{sub 2}ZrO{sub 3} a alta temperatura sin afectar significativamente las cineticas tanto de absorcion como de regeneracion de este mediante su promocion con Li. El Na{sub 2}ZrO{sub 3} fue sintetizado por reaccion en estado solido e impregnado con LiNO{sub 3} a diferentes relaciones Li/Na: 0, 0.03, 0.05, 0.1 y 0.25 (NZ, NZL3, NZL5, NZL10, NZL25). La caracterizacion consistio en XRD y SEM. La evaluacion como absorbente se realizo mediante TGA a 600 grados centigrados en 80% CO{sub 2} (absorcion) y 800 grados centigrados en aire (regeneracion). Los XRD indican solo la estructura Na{sub 2}ZrO{sub 3} en todas las muestras, pero las promovidas presentan un desplazamiento en sus senales respecto a las del Na{sub 2}ZrO{sub 3}, el cual se atribuye a la sustitucion de atomos de Na por Li. Los resultados de TGA indican que la adicion del Li en la estructura del

  13. Thermal analysis of the integration of an ammonia plant; Analisis de la integracion termica de una planta de amoniaco

    Energy Technology Data Exchange (ETDEWEB)

    Arriola Medellin, Alejandro M.; Huante Perez, Liborio; Rodriguez Martinez, J. Hugo; Alcaraz Calderon, A. Moises [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: aarriola@iie.org.mx; lhp@iie.org.mx; jhrm@iie.org.mx; malcaraz@iie.org.mx

    2010-11-15

    In this paper the thermal integration of an existing ammonia plant is evaluated using the Pinch Analysis tools. It is shown the design criteria that would have to fulfill the heat recovery network to take advantage of process streams thermal potentials. It was identified the heat recovery equipment that induces energy losses by incorrect streams selection, and the economic implications. [Spanish] En este trabajo se evalua la integracion termica de una planta existente de amoniaco usando las herramientas del analisis Pinch. Se muestran los criterios de diseno que deberian de cumplir las redes de recuperacion de calor, para aprovechar al maximo el potencial termico de las corrientes del proceso. Tomando como base dichos criterios se analizo el diseno la red de recuperacion de calor de la planta existente, identificando los equipos de recuperacion de calor que generan perdidas de calor por la seleccion incorrecta de las corrientes. Se estiman las perdidas economicas derivadas del diseno ineficiente de la red.

  14. Project of renewable energy for agriculture; Proyecto de energia renovable para la agricultura

    Energy Technology Data Exchange (ETDEWEB)

    Montufar Avilez, Octavio [FIRCO (Mexico)

    2005-07-01

    The document presents a general design of the hydraulic system, a hydraulic design of cattle ranch and a hydraulic design by dripping. It also discusses the components of the energy project, which are: institutional fortification, promotion and diffusion, market development (studies), specifications and certification, investments, technical support and direction of the project. The objective of this project is to diminish ignorance in the sector, to reduce the investment costs and to obtain a long term-sustainable effect. [Spanish] En este documento se describe un diseno general del sistema hidraulico, un diseno hidraulico de ganaderia, un diseno hidraulico por goteo y los componentes del proyecto de energia que son: fortalecimiento institucional, promocion y difusion, desarrollo del mercado (estudios), especificaciones y certificacion, inversiones, asistencia tecnica y direccion del proyecto. El objetivo de este proyecto es minimizar el desconocimiento en el sector, reducir los costos de inversion y que el efecto sea sostenible a largo plazo.

  15. Reassessment of Seismic Design and Noise Simulation using Finite Element Calculation of the Condensate Storage Tank of Cofrentes NPP according to standard API-650 11th Ed; Reevaluacion del diseno Sismico mediante Simulacion de Fluidos y Calculo por Elementos Finitos del Deposito del Almacenamiento de Condensado de Central Nuclear de Cofrentes conforme a la norma API-650 11th Ed

    Energy Technology Data Exchange (ETDEWEB)

    Sarti Fernandez, F.; Gavilan Moreno, C.; Paez Ortega, E.

    2012-07-01

    There have been several dynamic simulations in which I analyzed: fluid-structure interaction effect of the wave, studying stress, vibration modes and possible effects of structural instability. After this process to make the changes in the tank to comply with the new rules and updated seismic conditions were designed. were performed.

  16. Analysis of the micro-structural damages by neutronic irradiation of the steel of reactor vessels of the nuclear power plant of Laguna Verde. Characterization of the design steel; Analisis de los danos micro-estructurales por irradiacion neutronica del acero de la vasija de los reactores de la Central Nuclear de Laguna Verde. Caracterizacion del acero de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Moranchel y Rodriguez, M.; Garcia B, A. [IPN, Escuela Superior de Fisica y Matematicas, Departamento de Fisica, Av. Luis Enrique Erro s/n, Unidad Profesional Adolfo Lopez Mateos, Col. Lindavista, 07738 Mexico D. F. (Mexico); Longoria G, L. C., E-mail: mmoranchel@ipn.m [ININ, Direccion de Investigacion Cientifica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2010-09-15

    The vessel of a nuclear reactor is one of the safety barriers more important in the design, construction and operation of the reactor. If the vessel results affected to the grade of to have fracture and/or cracks it is very probable the conclusion of their useful life in order to guarantee the nuclear safety and the radiological protection of the exposure occupational personnel, of the public and the environment avoiding the exposition to radioactive sources. The materials of the vessel of a nuclear reactor are exposed continually to the neutronic irradiation that generates the same nuclear reactor. The neutrons that impact to the vessel have the sufficient energy to penetrate certain depth in function of the energy of the incident neutron until reaching the repose or to be absorbed by some nucleus. In the course of their penetration, the neutrons interact with the nuclei, atoms, molecules and with the same crystalline nets of the vessel material producing vacuums, interstitial, precipitate and segregations among other defects that can modify the mechanical properties of the steel. The steel A533-B is the material with which is manufactured the vessel of the nuclear reactors of nuclear power plant of Laguna Verde, is an alloy that, among other components, it contains atoms of Ni that if they are segregated by the neutrons impact this would favor to the cracking of the same vessel. This work is part of an investigation to analyze the micro-structural damages of the reactor vessels of the nuclear power plant of Laguna Verde due to the neutronic irradiation which is exposed in a continuous way. We will show the characterization of the design steel of the vessel, what offers a comprehension about their chemical composition, the superficial topography and the crystalline nets of the steel A533-B. It will also allow analyze the existence of precipitates, segregates, the type of crystalline net and the distances inter-plains of the design steel of the vessel. (Author)

  17. Stretched membrane heliostats: design and structural analysis of reflectance module and support of a heliostats of 9 m. diaform and 60 m''3 of reflectance surface; Diseno y analisis estructural del modulo reflectante y estructura soporte de un heliostato de 9 m. de diametro y 60 m2 de superficie reflectante

    Energy Technology Data Exchange (ETDEWEB)

    Figarola Torres, J M

    1993-07-01

    After having designed and built at CIEMAT a first prototype of a Btretched membrane heliostats of 3 m. diameter, the design and the structural analysis of the different components included in the reflectance module and support of another heliostats, this one of 9 m. diameter and 60 m2. of reflectance surface, are shown In this report. This last heliostats will be mounted on a pedestal and its driving device at the Solar Platform of Almeria. In order to optimize design and performance, the structural analysis of its basic components has been analyzed with the finite elements program ANSYS. The following elements have been subject to analysis: the membrane and their ring supports, stretching system and the structural support. A similar scheme to the one applied to the previous prototype has been used on the focus control system. That includes a linear transducer, a variable frequency and a fan. Finally it has to be pointed out that substantial improvements have been achieved with respect to the first prototype concerning design and cost. (Author) 5 refs.

  18. Design, construction and operation of a measurement device to evaluate the disturbance effect caused by the magnetic field in the cardiac muscle of rats; Diseno, construccion y operacion de un dispositivo de medicion para evaluar el efecto perturbador del campo magnetico en el funcionamiento del musculo cardiaco de ratas

    Energy Technology Data Exchange (ETDEWEB)

    Soibelzon, Hector Leopoldo; Arcione, Juan Carlos [Universidad de Buenos Aires (Argentina). Facultad de Ingenieria. Grupo Energia y Ambiente]. E-mail: hsoibel@fi.uba.br

    2001-07-01

    This article focuses the requirements and procedures for design, construction of inductors and measurement explorer coils in relation to an addressed device to analyse the effects of magnetic fields in the cardiac muscle of rats. It also offers information about tests and measurements involving heart systems made by Buenos Aires Medicine College. It also presents a description of a suitable mechanism that could explain the international current concern in relation to risks for the health starting from the submission to electric and magnetic fields.

  19. Design of bimetal catalysts Pt-Ni/CeO{sub 2}-1D for generation of H{sub 2} by the reforming reaction of methanol; Diseno de catalizadores bimetalicos Pt-Ni/CeO{sub 2}-1D para generacion de H{sub 2} mediante la reaccion de reformado de metanol

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento F, I.

    2016-07-01

    CeO{sub 2} nano rods were synthesized by hydrothermal method and were used as support for preparing catalysts bimetallic Pt Ni / CeO{sub 2}-1D. The catalysts were prepared by classical impregnation by the conventional wet method. The prepared catalysts are Pt (0.5 %) - Ni (5 %) / CeO{sub 2} and Pt (0.5 %) - Ni (15 %) / CeO{sub 2}, which were characterized by different physico-chemical techniques: Bet, Sem, TPR and XRD, that were evaluated in the Auto thermal Steam reforming of Methanol for H{sub 2} production. The Bet surface area results, show that the surface area of the catalysts decreases as the nominal load of Ni in the catalyst, increases. Sem shows, that the catalyst support (CeO{sub 2}-1D) and the bimetallic catalysts are conformed by nano rods. By XRD were identified the crystalline phases present, in the catalytic material: cerianite distinctive phase of cerium oxide and metallic Ni; however it was not possible to observe diffraction peaks of Platinum using this technique. The temperature-programmed reduction (TPR) analysis allowed to obtain the reduction profiles, of the different species present on the catalysts. The catalytic activity tests carried out, showed that the catalysts total 100% methanol conversion is achieved at 300 degrees Celsius, making them excellent, to be used in reactions at low temperature conditions. Selectivity towards H{sub 2}, is very similar in both catalysts, and it reaches a 50% yield per mole of methanol fed stoichiometrically. (Author)

  20. Application of the Scandpower methodology for the pattern design of the control bars at full power in the cycle 1 of the CNLV; Aplicacion de la metodologia de Scandpower para el diseno de patrones de barras de control a plena potencia en el ciclo uno de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Montes T, J L; Perusquia C, R [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1992-05-15

    The objective of this report is by means of the methodology provided by Scandpower to design a group of patterns of control bars to full power for the operation of the first operation cycle of the Laguna Verde Unit 1 reactor. (Author)

  1. Design and simulation of an automation system of a production process and fractionation of {sup 131}I, using strategies of advanced control; Diseno y simulacion de un sistema de automatizacion del proceso de produccion y fraccionamiento de {sup 131}I, utilizando estrategias de control avanzado

    Energy Technology Data Exchange (ETDEWEB)

    Paez, Jose; Arias, Pablo; Miranda, Jesus, E-mail: jpaez@jpen.gob.pe, E-mail: parias@ipen.gob.pe, E-mail: jmiranda@ipen.gob.pe [Instituto Peruano de Energia Nuclear (lPEN), Lima (Peru). Direccion de Servicios. Division de Instrumentacion Nuclear

    2013-10-01

    In this report, the results are obtained in the design and simulation of a control system using advanced strategies in a production cell in the Plant Production of Radioisotopes of IPEN. The results demonstrate that the temperature of the coalition oven is stabilized after 30 minutes, being constituted in an advantage to obtain the maximum yield of the cell production of {sup 131}I; also, an integral good controller has been designed that allows to obtain a mathematical model that reproduces with enough accuracy the behavior of the process. With the final simulation it has been to demonstrate that the System Control of Temperature of the Cell Production of {sup 131}I is a controllable system and allows to carry out the respective sequence with other variables of control of the production cell. (author)

  2. Design and optimization of the production process of radiopharmaceutical {sup 177}Lu-DOTA-Nal{sup 3}-Octreotide for the treatment of gastro-entero-pancreatic tumors; Diseno y optimizacion del proceso de produccion del radiofarmaco {sup 177}Lu-DOTA-Nal{sup 3}-Octreotido para el tratamiento de tumores gastroenteropancreaticos

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez G, M. F.

    2013-07-01

    The radiolabel peptides are molecules of interest in nuclear medicine for their therapeutic and diagnostic application in cancer. Among an impressing group of relevant peptides, those similar of the somatostatin, as the Nal{sup 3}-Octreotide (NOC), have established as potential radiopharmaceuticals when presenting significant affinity for the receptors of this peptide hormone that are over expressed and broadly distributed in tumors of neuroendocrine origin, as the gastro-entero-pancreatic tumors. On the other hand, the Lutetium-177 ({sup 177}Lu) is an ideal candidate for the peptides radiolabel and has favorable characteristics to be used in radionuclide therapy. The objective of this work was designing, optimizing and to document the production process of the radiopharmaceutical {sup 177}Lu-DOTA-Nal{sup 3}-Octreotide ({sup 177}Lu-DOTANOC) for the solicitude of its sanitary registration before the Comision Federal contra Riesgos Sanitarios (COFEPRIS). For the optimization of the production process a factorial design of three variables was evaluated with mixed levels (18 combinations), where the dependent variable is the radiochemical purity and the analytic method used to determine this parameter (High Performance Liquid Chromatography) was validated. Later on, by means of the production of 3 lots of the optimized formula of the radiopharmaceutical {sup 177}Lu-DOTANOC the production process was validated and the stability long term study to determine the period of useful life was carried out. The following pharmaceutical formulation was adopted as good: 1.85 GBq (0.5μg) of {sup 177}Lu, 250 μg of DOTANOC and 150 μL of acetates Buffer 1 M ph 5 in 5 m L of the medium. The analytic method used to determine the radiochemical purity of the formulation satisfied the requirements for the wished analytic application. We can conclude that the 3 validation lots prepared under protocols of Good Production Practices, in the Plant of Radiopharmaceuticals Production of the Instituto Nacional de Investigaciones Nucleares (ININ), they fulfill the pre established specifications when is obtained a sterile and free formulation of bacterial endotoxins with yields of labeled of 100% and that conserves their quality characteristics during at least 8 days. Finally, the legal file of the {sup 177}Lu-DOTANOC was integrated with the documented evidence of the quality, security and effectiveness of a formulation of this radiopharmaceutical that is stable the enough time for their distribution and use in the treatment of gastro-entero-pancreatic tumors. (Author)

  3. Instrumental set up for the study of water erosion processes to different scales in the upper Barranc de Carraixet water basin; Diseno instrumental para el estudio de los procesos de erosion hidrica a distintas escalas en la cuenca alta del Barranc del Carraixet

    Energy Technology Data Exchange (ETDEWEB)

    Rubio, J. L.; Pascual-Aguilar, J. A.; Andreu, V.

    2009-07-01

    As a result of the rainfall conversion into overland flow, two major fluxes are established, the water flow and the associated erosion flow. The process complexity and heterogeneity together with the numerous factor that interact recommend the use of multi-scale approaches for a better understanding. Thus the methodological approach established in this work focus on a hierarchical instrumental implementation at different spatial scales within the same watershed, the Barranc the Carraixet Head Waters, in the vicinity of the city of Valencia, spain. For the instrumentation setting up, four data gathering structures have been designed, from the micro plot scale to the medium size drainage basin of several square kilometres. (Author) 5 refs.

  4. Design, construction and implementation of two redundant circuits of the actuation logic of the protection system of the new control console of TRIGA Mark III reactor of ININ; Diseno, construccion e implementacion de dos circuitos redundantes de la logica de actuacion del sistema de proteccion de la nueva consola de control del reactor Triga Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Celestino M, E.

    2016-07-01

    The Instituto Nacional de Investigaciones Nucleares (ININ) in Mexico has a nuclear reactor type TRIGA Mark III, which was put into operation in 1968. The reactor is used for staff training, radioisotope production, and for research projects of different areas. Over time and due to advances constantly has the electronics industry, maintenance of electronic systems is complicated because basically sometimes components that are no longer manufactured or no longer exist in the market, making it necessary to create projects required modernization. This is the case of the TRIGA reactor of ININ, so the Department of Automation and Instrumentation ININ is undertaking a new project to update the reactor control console. Systems that make up a nuclear reactor protection system (Ps) is relevant, since it is responsible for generating the necessary steps to shut down the reactor to an event of uncertainty which could affect the operators or the installation own actions. As part of the renovation project, this study design is presented to update the Logic of Action (La) of the Ps, whose final design must meet the requirements or specifications set by users and or regulations applicable to nuclear research reactors. One of the requirements established for the proposed new design La, is that it must be implemented with components and devices manufactured with latest technologies, and readily available on the market. The design which is operating currently uses TTL logic whose components are no longer available in the market, so for the new design you decide to use programmable circuits, and specifically, the CPLDs called (by the acronym Complex Programmable Logic Device). These CPLDs are electronic devices that solve complex logic equations and meeting the requirements of functionality and modernity for the new design of the La. In this work the criteria used for the selection of the CPLDs considering the availability and ease of software and hardware to use, and the design and testing of prototype circuits generated, implementation and simulation in the selected software are described, and design of printed circuit boards. (Author)

  5. Design and verification of the integration of simulation environments, models of a nucleo electric plant and advanced computation languages, in the creation of multimedia applications for training and teaching; Diseno y verificacion de la integracion de entornos de simulacion, modelos de una planta nucleoelectrica y lenguajes de computacion avanzados, en la creacion de aplicaciones multimedia para entrenamiento y docencia

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez B, A [Facultad de Ingenieria, UNAM, 04510 Mexico D.F. (Mexico)

    2004-07-01

    The design process of a reliable and stable integration system is presented among the models that represent present elements in a nucleo electric plant and advanced programming environments in Windows platform. In particular it is analyzed in the case of the integration of the pattern corresponding to the system of feeding water and their associate controller in a graphic structure and of control of superior graphic capacities to the existent desk simulators, mainly because it gives direct access to the graph area and of maximum speed in their execution. In turn it is proven the capacity of the models to behave chord to the prospective answer for that type of systems and a comparative of the found answers is made directly in the models and that shown graphically. They are also described the characteristics that provide to the execution of real time, and jointly, a panorama of the diverse possibilities of representation of the graphic interface is given. Also, the capacities of the simulation environments are analyzed and of used programming, highlighting the advantages and disadvantages that took to the elected solution, considering the support objective in training and teaching. The design proposes a reliable methodology that can be used in the development of simulators, in graphic demonstration of concepts, prototypes, among other applications. (Author)

  6. Design and implementation of a rotational radiotherapy technique for breast cancer treatment and their comparison with 3-D-Crt irradiation technique; Diseno e implementacion de una tecnica de radioterapia rotacional para tratamiento de cancer de mama y su comparacion contra la tecnica 3D-CRT de irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez M, J. G.; Lopez V, A.; Rivera M, T. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico); Velazquez T, J. J.; Adame G, C. S. [Centro Medico Nacional Siglo XXI, Hospital de Oncologia, Departamento de Fisica Medica, Av. Cuauhtemoc No. 330, Col. Doctores, 06720 Mexico D. F. (Mexico); Rubio N, O.; Chagoya G, A.; Hernandez G, J. C., E-mail: jggm25@yahoo.com.mx [Centro Medico Nacional Siglo XXI, Hospital de Oncologia, Departamento de Radioterapia, Av. Cuauhtemoc No. 330, Col. Doctores, 06720 Mexico D. F. (Mexico)

    2015-10-15

    Breast cancer is one of oncological diseases worldwide, as well in Mexico, which causes even more deaths than cervical cancer; this condition is the second death cause in women aged 30-54 years and threatens all socio-economic groups. The treatment is highly dependent on the stage which is detected and based on protocols that include a combination of surgery, chemotherapy and radiotherapy. This paper studies the main irradiation technique for patients with mastectomy, breast full cycle (irradiation of the chest well and supraclavicular nodes) in their mode Three Dimensional - Conformal Radiation Therapy (3-D-Crt), and compared with the Volumetric Modulated Arc Therapy (VMAT) technique proposed in this paper. In both techniques the prescription was 50 Gy divided into 25 fractions. The techniques were applied in three female patients (being an initial study) with disease of the left side, the target volume and organs at risk were delineated by the medical treating radiation oncologist, the planning system used was Eclipse version 10; for quantitative comparison of both plans indexes of homogeneity were used, con formality, the target volume coverage and normal tissue, sub factors and overdosing, the conformation number and coverage quality. They were evaluated and compared the media, maximum and minimum dose of the organs at risk, based on the fact that the coverage of the target volume, dose gradient and dose at risk organs are acceptable (prescription dose greater that 90% coverage, gradient less that 20% and organs at risk in accordance with the Quantec limitations for both versions). (Author)

  7. Statistical analysis in the design of nuclear fuel cells and training of a neural network to predict safety parameters for reactors BWR; Analisis estadistico en el diseno de celdas de combustible nuclear y entrenamiento de una red neuronal para predecir parametros de seguridad para reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Jauregui Ch, V.

    2013-07-01

    In this work the obtained results for a statistical analysis are shown, with the purpose of studying the performance of the fuel lattice, taking into account the frequency of the pins that were used. For this objective, different statistical distributions were used; one approximately to normal, another type X{sup 2} but in an inverse form and a random distribution. Also, the prediction of some parameters of the nuclear reactor in a fuel reload was made through a neuronal network, which was trained. The statistical analysis was made using the parameters of the fuel lattice, which was generated through three heuristic techniques: Ant Colony Optimization System, Neuronal Networks and a hybrid among Scatter Search and Path Re linking. The behavior of the local power peak factor was revised in the fuel lattice with the use of different frequencies of enrichment uranium pines, using the three techniques mentioned before, in the same way the infinite multiplication factor of neutrons was analyzed (k..), to determine within what range this factor in the reactor is. Taking into account all the information, which was obtained through the statistical analysis, a neuronal network was trained; that will help to predict the behavior of some parameters of the nuclear reactor, considering a fixed fuel reload with their respective control rods pattern. In the same way, the quality of the training was evaluated using different fuel lattices. The neuronal network learned to predict the next parameters: Shutdown Margin (SDM), the pin burn peaks for two different fuel batches, Thermal Limits and the Effective Neutron Multiplication Factor (k{sup eff}). The results show that the fuel lattices in which the frequency, which the inverted form of the X{sup 2} distribution, was used revealed the best values of local power peak factor. Additionally it is shown that the performance of a fuel lattice could be enhanced controlling the frequency of the uranium enrichment rods and the variety of the gadolinium rods used in the design. In the same way we can prove that we could predict the behavior of a fuel reload using a training neuronal network for this purpose. (Author)

  8. Design and characteristics of beta-excited X-ray sources; Caracteristiques des sources de rayons X excitees par des particules beta; Konstruktsiya i kharakteristiki beta-vozbuzhdennykh istochnikov rentgenovskikh luchej; Diseno y caracteristicas de las fuentes de rayos X excitadas por particulas beta

    Energy Technology Data Exchange (ETDEWEB)

    Filosofo, I; Reiffel, L; Stone, C A; Voyvodic, L [Physics Division, Armour Research Foundation, Chicago, IL (United States)

    1962-01-15

    The paper reports on recent work on beta-excited X-ray sources. Results of detailed experimental investigation on the X-rays produced by the fission products Pm{sup 147}, Kr{sup 85} and Sr{sup 90} are described. X-ray yields and spectral distributions have been studied for target materials ranging from copper to uranium and in a variety of source-target geometries (transmission target, reflection target, sandwich target, intimate source-target mixtures). To interpret the experimental results, an analytical treatment of the processes involved in X-ray production by beta particles has been developed and is outlined. By taking into account bremsstrahlung, K-shell ionization, and fluorescent X-ray excitation, a convenient mathematical formulation may be derived for photon spectra and yields as functions of maximum {beta}-energy, target thickness and source configuration. The agreement between calculated and experimentally determined yields is excellent and confirms the merit of the analysis. It thus becomes possible to optimize the design of isotopic X-ray sources for specific applications. Kr{sup 85} and Pm{sup 147} prototype sources have been designed and 'their performance in thickness and composition-analysis measurements is discussed. A high level Pm{sup 147} source for industrial radiography has also been designed and its performance, along with the utility of image intensifiers to extend its applicability, is considered. Finally, a general review of potentialities, advantages and limitations of isotopic X-ray sources is given. (author) [French] Le memoire rend compte des recents travaux sur les sources de rayons X excitees par des particules beta. Il donne les resultats d'une etude experimentale detaillee sur les rayons X emis par les produits de fission {sup 147}Pm, {sup 85}Kr et {sup 90}Sr. Les auteurs ont etudie l'emission et la distribution spectrale des rayons X pour des cibles allant du cuivre a l'uranium, et ce dans plusieurs geometries source-cible differentes, a savoir : etude en transmission, en retrodiffusion, en , et enfin avec source et cible intimemement liees. Pour interpreter les resultats des experiences, les auteurs ont mis au point une analyse des processus qui interviennent dans la production des rayons X par les particules beta; ils en font l'expose. En tenant compte du rayonnement de freinage, de l'ionisation de la couche K et de fluorescence provoquee par les rayons X, il est possible de degager une formule mathematique commode pour les spectres et les nombres de photons emis, en fonction de l'energie beta maximum, de l'epaisseur de la cible et de la configuration de la source. En ce qui concerne les nombres de photons emis, les resultats de l'experience concordent parfaitement avec ceux des calculs theoriques, ce qui confirme la valeur de l'analyse. Il devient ainsi possible de mettre au point des sources de rayons X isotopiques repondant aux exigences des applications auxquelles elles sont destinees. On a construit des sources prototypes de {sup 85}Kr et de {sup 147}Pm; les auteurs en etudient l'efficacite pour les mesures d'epaisseur et les analyses de composition. Ils examinent aussi le comportement d'une source de {sup 147}Pm de grande intensite, mise au point pour Le memoire rend compte des recents travaux sur les sources de rayons X excitees par des particules beta. Il donne les resultats d'une etude experimentale detaillee sur les rayons X emis par les produits de fission {sup 147}Pm, {sup 85}Kr et {sup 90}Sr. Les auteurs ont etudie l'emission et la distribution spectrale des rayons X pour des cibles allant du cuivre a l'uranium, et ce dans plusieurs geometries source-cible differentes, a savoir : etude en transmission, en retrodiffusion, en , et enfin avec source et cible intimemement liees. Pour interpreter les resultats des experiences, les auteurs ont mis au point une analyse des processus qui interviennent dans la production des rayons X par les particules beta; ils en font l'expose. En tenant compte du rayonnement de freinage, de l'ionisation de la couche K et de fluorescence provoquee par les rayons X, il est possible de degager une formule mathematique commode pour les spectres et les nombres de photons emis, en fonction de l'energie beta maximum, de l'epaisseur de la cible et de la configuration de la source. En ce qui concerne les nombres de photons emis, les resultats de l'experience concordent parfaitement avec ceux des calculs theoriques, ce qui confirme la valeur de l'analyse. Il devient ainsi possible de mettre au point des sources de rayons X isotopiques repondant aux exigences des applications auxquelles elles sont destinees. On a construit des sources prototypes de {sup 85}Kr et de {sup 147}Pm; les auteurs en etudient l'efficacite pour les mesures d'epaisseur et les analyses de composition. Ils examinent aussi le comportement d'une source de {sup 147}Pm de grande intensite, mise au point pour la radiographie industrielle, ainsi que l'utilite des renforcateurs d'images, qui permettraient d'en etendre le champ d'application. Enfin, les auteurs passent en revue les possibilites, avantages et limites des sources de rayons X isotopiques. [Spanish] La memoria trata de trabajos realizados recientemente acerca de fuentes de rayos X excitadas por particulas beta. Describe los resultados de una minuciosa investigacion experimental sobre los rayos X generados por los productos de fision {sup 147}Pm, {sup 85}Kr y {sup 90}Sr. Los autores han estudiado los rendimientos en rayos X y las distribuciones espectrales correspondientes a materiales de blanco que abarcan del cobre al uranio, para diversas geometrias fuente-blanco (blancos de transmision, blancos de reflexion, blancos ''sandwich'' y mezclas intimas de la fuente y el blanco). Para interpretar los resultados experimentales, los autores idearon un metodo de analisis de los procesos que intervienen en la produccion de rayos X por excitacion mediante particulas beta; dicho metodo se describe en la memoria. Si se tienen en cuenta la radiacion de frenado (Bremsstrahlung), la ionizacion de la capa K y la fluorescencia provocada por los rayos X, puede lograrse una formulacion matematica satisfactoria para calcular los rendimientos y los espectros fotonicos en funcion de la energia {beta} maxima, del espesor del blanco y de la configuracion de la fuente. Los rendimientos calculados concuerdan perfectamente con los determinados por via experimental, lo que confirma la validez del metodo analitico. De esta forma, resulta posible disenar fuentes isotopicas de rayos X que responden optimamente a las exigencias de las aplicaciones a las que van destinadas. Los autores disenaron prototipos de fuentes de {sup 85}Kr y de {sup 147}Pm, y la memoria analiza su eficacia en las mediciones de espesores y el analisis de sustancias compuestas. Tambien disenaron una fuente de {sup 147}Pm de elevada intensidad destinada a la radiografia industrial; la memoria examina su funcionamiento, asi como la utilidad de los intensificadores de imagen que permiten ampliar el campo de aplicaciones de dicha fuente. Los autores terminan su memoria con un examen general de las posibilidades, ventajas y limitaciones de las fuentes isotopicas de rayos X. (author) [Russian] V dokumente izlagayutsya novejshie rezul'taty rabot nad beta-vozbuzhdennymi istochnikami rentgenovskikh luchej. Opisyvayutsya rezul'taty podrobnogo ehksperimental'nogo issledovaniya rentgenovskikh luchej, proizvodimykh produktami deleniya Rt-147, Kg-85 i Sr-90. Vykhod rentgenovskikh luchej i spektral'noe raspredelenie byli izucheny dlya mishenej, postroennykh iz materialov, idushchikh ot medi do urana, a takzhe dlya raznoobraznogo vzaimnogo raspolozheniya istochnika i mishenej: (propuskayushchaya mishen', otrazhayushchaya mishen', 'sloenaya'' mishen', tesnoperemeshannye istochniki i mishen'). Osobenno podrobno byla izuchena smes' iz prometiya-147 s okis'yu samariya dlya vyyasneniya perspektiv ispol'zovaniya istochnika vysokogo urovnya, v kotorom sam prometij-147 yavlyaetsya glavnoj mishen'yu rentgenovskikh luchej. Detektirovanie rentgenovskikh luchej proizvodilos' pri pomoshchi stsintillyatsionnykh i proportsional'nykh schetchikov sovmestno s 256-kanal'nym amplitudnym analizatorom impul'sov. Dlya istolkovaniya ehksperimental'nykh dannykh bylo vyrabotano i opisano analiticheskoe vyrazhenie protsessov obrazovaniya rentgenovskikh luchej beta-chastitsami. Esli uchest' tormoznoe izluchenie, obolochechnuyu K-ionizatsiyu i flyuorestsiruyushchee vozbuzhdenie rentgenovskikh luchej, to mozhno vyvesti podkhodyashchuyu matematicheskuyu formulu dlya opredeleniya spektra i vykhoda fotonov v funktsii ot maksimal'noj beta-ehnergii, tolshchiny misheni i konfiguratsii istochnika. Poluchaetsya otlichnoe sovpadenie raschetnykh rezul'tatov s ehksperimental'no poluchennymi vykhodami, chto podtverzhadaet tsennost' ehtogo sposoba analiza. Takim obrazom otkryvaetsya vozmozhnost' dlya optimizatsii konstruktsii izotopnykh istochnikov rentgenovskikh luchej v otnoshenii tekh ili inykh primenenij. Byli skonstruirovany prototipnye istochniki kriptona-85 i prometiya-147 i obsuzhdayutsya poluchennye s nimi rezul'taty izmerenij tolshchiny i analiza sostava. Byl takzhe skonstruirovan istochnik prometiya-147 vysokogo urovnya dlya promyshlennoj radiografii i obsuzhdayutsya rezul'taty ispol'zovaniya ehtogo istochnika, a takzhe tselesoobraznost' primeneniya usilitelej izobrazheniya, chto dolzhno eshche bol'she rasshirit' oblast' primeneniya ehtogo metoda. Nakonets, daetsya obshchij obzor vozmozhnostej, preimushchestv i ogranichenij izotopnykh istochnikov rentgenovskikh luchej. (author)

  9. Methodology based in the fuzzy logic for constructing the objective functions in optimization problems of nuclear fuel: application to the cells radial design; Metodologia basada en logica difusa para construir las funciones objetivo en problemas de optimizacion de combustible nuclear: aplicacion al diseno radial de celdas

    Energy Technology Data Exchange (ETDEWEB)

    Barragan M, A.M.; Martin del Campo M, C.; Palomera P, M.A. [FI-UNAM, Circuito Exterior, Ciudad Universitaria, 04510 Mexico D.F. (Mexico)]. E-mail: ale_bar_m@yahoo.com.mx

    2005-07-01

    A methodology based on Fuzzy Logic for the construction of the objective function of the optimization problems of nuclear fuel is described. It was created an inference system that responds, in certain form, as a human expert when it has the task of qualifying different radial designs of fuel cells. Specifically it is detailed how an inference system based based on Fuzzy Logic that has five enter variables and one exit variable was built, which corresponds to the objective function for the radial design of a fuel cell for a BWR. The use of Fuzzy with Mat lab offered the visualization capacity of the exit variable in function of one or two enter variables at the same time. This allowed to build, in appropriate way, the combination of the inference rules and the membership functions of those diffuse sets used for each one of the enter variables. The obtained objective function was used in an optimization process based on Taboo search. The new methodology was proven for the design of a cell used in a fuel assemble of the Laguna Verde reactor obtaining excellent results. (Author)

  10. Improvement of the obtention process of {sup 131} I of ININ through studies of equipment design and process parameters fitting in the simulator; Perfeccionamiento del proceso de obtencion del {sup 131} I del ININ mediante estudios de diseno del equipo y ajustes de parametros del proceso en el simulador

    Energy Technology Data Exchange (ETDEWEB)

    Zepeda M, M C

    2006-07-01

    The main objective of the work was to achieve a high yield of the reaction that happens among the vapors of {sup 131} I and the NaOH to obtain sodium iodide (Na{sup 131} I) in solution optimizing the contact time of the molecules in gaseous state of {sup 131} I with the NaOH molecules through the bubbling velocity of the {sup 131} I in the solution of NaOH 0.1 N, as well as the operation temperature during the distillation process by dry via starting from tellurium dioxide (TeO{sub 2}) with the purpose of that the {sup 131} I that is obtained in the form of Na{sup 131} I solution presents the necessary quality that allows to distribute it in the market. The particular objectives were: a) To improve the distillation equipment used for the obtaining of {sup 131} I starting from irradiated tellurium dioxide redrawing the dilution system with the purpose of recovering the {sup 131} I in a minimum volume of sodium hydroxide (NaOH). b) To achieve a bigger time of contact among the molecules of {sup 131} I in gaseous state with the molecules of NaOH in solution through the bubbling velocity and of the redrawing of the dilution system. c) To implement the production of {sup 131} I by dry distillation via starting from tellurium dioxide, obtaining it with a high radionuclide and radiochemical purity. d) To obtain {sup 131} I with the necessary specifications that it marks the pharmacopoeia and it can be used with medical ends. (Author)

  11. Design of impact limiters of a bulk type B (U) . Trials of fall and validation of the analytical model In the design of a container for transportation of spent fuel, the impact limiters are a fundamental part for compliance with regulatory requirements; Diseno de los Limitadores de impacto de un Bulto Tipo B(U). Ensayos de Caida y validacion del Modelo Analitico

    Energy Technology Data Exchange (ETDEWEB)

    Garrido Quevedo, D.

    2013-07-01

    The aim is to confirm through real trials that the design and the results obtained through simulation conform to reality with a high degree of confidence... The combination of tests on scale models and the validation of the methods of calculation are necessary tools for the design of limiters impact a container of spent fuel transport.

  12. Design and monitoring of several cubicles with traditional construction equipment (insulating) and novel (green PCMs, covers and facades) in the University of Lleida; Diseno y monitorizacion de varios cubiculos con materiales de construccion tradicionales (aislantes) y novedosos (PCMs, cubiertas y fachadas verdes) en la Universidad de Lleida

    Energy Technology Data Exchange (ETDEWEB)

    Medrano, M.; Castell, A.; Castellon, C.; Martorell, I.; Perez, G.; Cabeza, L. F.

    2008-07-01

    This paper presents a new experimental facility of house-like cubicles in the University of Lleida. This installation allows to evaluate in a more realistic way the energy enhancements given by a variety of construction materials, both traditional (insulation) and innovative (PCMs, green roofs and green facades, etc.). This study includes the cubicles characteristics, the selected constructive solutions (concrete, brick, alveolar brick, etc.), the implemented instrumentation, and some preliminary results comparing the thermal behaviour of a reference cubicle, made of a double facade of brick and no insulation, with the demand of the other cubicles, which contain insulation, PCMs or both. (Author)

  13. Analysis of Scan Records with a Recording Densitometer - The ''Re-Scanner''; Etude d'un Grand Collimateur a Focalisation et Fort Pouvoir de Resolution: Resultats; Analiz skenogramm s pomoshch'yu registriruyushchego densitometra - ''re-skenner''; Diseno y Funcionamiento de un Gran Colimador Enfocado de Alto Poder de Resolucion

    Energy Technology Data Exchange (ETDEWEB)

    Harris, C. C.; Bell, P. R.; Satterfield, M. M.; Ross, D. A.; Jordan, J. C. [Oak Ridge National Laboratory, TN (United States)

    1964-10-15

    The impact of improvements in scanning equipment has not been fully felt at the clinical level, largely because of deficiencies in scan recording. In an attempt to improve visualization and contrast in scan records, various instrumental methods of analysis have been devised. We have devised a simple and comparatively inexpensive recording densitometer for ''re-scanning'' scan records. A light-sensor scans the record just as a scanner scans a patient. The output of the device is a pulse rate proportional to the opacity (or transmission) of the record, and may be used to make a new, or ''re-scan'', record. The area of the record over which information is integrated is set by sensor aperture. The wide range of output pulse-rates (zero to 15 000 parts/s) causes large and adjustable contrast amplification. A threshold control provides any ''cut-off level'' of choice. Operation is rapid, and a record can be re-scanned in a small fraction of the time required to obtain the original record. Studies on clinical scans of almost every organ or area of interest show that the re-scanner reveals information not at first evident in original scan records. It has been particularly useful in determining the statistical significance of small variations in counting rate in a scan record. In scan records of large dynamic range where no single cut-off level satisfactorily shows all regions of interest, re-scans at several cut-off levels were once necessary. A two-region sensor, that views a region of the record around the field of view of the main sensor, has been used in an attempt to overcome this difficulty. At least three modes of operation are possible with the two-region sensor: (1) ''normal'' operation; (2) ignoring general record density and responding only to small variations, thus setting its own cut-off level; and (3) reporting only abrupt changes in record density. Other modes seem to be possible. This relatively simple and inexpensive device is proving to be of valuable assistance in the interpretation of scan records. (author) [French] U s perfectionnements des appareils de scintigraphie n'ont pas eu d'effet comparable sur le plan clinique, surtout en raison des imperfections des enregistrements scintigraphiques. En vue d'ameliorer la visualisation et le contraste des scintigrammes, on a mis au point divers appareils d'analyse. Les auteurs ont concu un densitometre enregistreur, assez simple et relativement peu couteux, qui permet de 'scintigraphier' les scintigrammes. Une cellule photoelectrique explore le scintigramme, tout comme un detecteur ascintillation explore le patient. Les impulsions a la sortie de l'appareil sont proportionnelles a la densite du scintigramme et elles peuvent etre utilisees pour etablir un nouvel enregistrement. La surface du scintigramme pour laquelle on integre les informations est determinee par l'ouverture de la c ellule . La gamme etendue des impulsions a la sortie (de zero a 15 000 impulsions/s) permet d'amplifier fortement et a volonte le contraste. Un dispositif special permet de choisir a l'avance un ' seuil de coupure' L'operation est rapide, si bien qu'un scintigramme peut etre explore en une fraction du temps qui avait ete necessaire pour l'etablir. L*etude de scintigrammes cliniques de presque tous les organes ou regions interessants a permis de constater que le densitometre enregistreur revele des informations qui n'apparaissaient pas clairement sur le scintigramme. Cet appareil a ete particulierement utile pour determiner la signification statistique de legeres variations du taux de comptage dans un scintigramme. Pour les scintigrammes representant de fortes variations de la radioactivite, ou un seul seuil de coupure du densitometre ne donne pas une image satisfaisante de toutes les zones interessantes, il fallait autrefois faire plusieurs explorations avec differents seuils de coupure. Pour surmonter cette difficulte, on a eu recours a une c ellule a deux plages qui explore le scintigramme autour du champ de vision de la c ellule principale. On peut l 'utiliser d'au moins trois manieres: a) normalement; b) sans tenir compte de la densite generale du sci ntigramme, pour n 'accuser que de faibles variations de la densite (en fixant alors son propre seuil de coupure); c) pour n'enregistrer que de brusques variations de la densite du scintigramme. Il semble que d'autres modes d'utilisation soient egalement possibles. Cet appareil, relativement simple et peu couteux, se revele extremement utile pour l'interpretation des scintigrammes. (author) [Spanish] El perfeccionamiento de los aparatos de centelleografia no ha repercutido como debiera en los estudios clinicos debido, en gran parte, a las deficiencias de los centelleogramas. Para mejorar la visualizacion y acentuar el contraste se han estudiado diversos metodos instrumentales de analisis. Los autores han ideado un densitometro registrador sencillo y poco costoso para 'reexplorar' centelleogramas. Un elemento fotosensible analiza el centelleograma de la misma manera que el detector explora al paciente. Ese elemento responde con impulsos de frecuencia proporcional a la opacidad (o capacidad de transmision) del registro y puede utilizarse para hacer otro nuevo (registro de ' reexploracion'). El area del registro respecto a la cual se integra la informacion, se determina fijando la apertura del elemento fotosensible. El amplio margen de la frecuencia de los impulsos de salida (entre 0 y 15 000 impulsos/s) da lugar a un gran aumento del contraste, que es posible graduar. Un regulador de umbral permite preseleccionar cualquier ' nivel de corte' . La operacion es rapida y es posible reexplorar un registro en una pequena fraccion del tiempo que se necesito para obtenerlo. El estudio de centelleogramas clinicos de casi todos los organos o zonas de interes maestra que la reexploracion proporciona datos que no eran evidentes en los centelleogramas originales. Ese metodo resulta especialmente util para determinar la significacion estadistica de pequenas variaciones del fndice de recuento en un centelleograma. Con los centelleogramas de intervalo dinamico muy amplio, en los que un solo nivel de corte no revela todas las regiones de interes, era preciso anteriormente trabajar a diversos niveles. Para allanar esta dificultad, los autores han tratado de emplear un elemento fotosensible bizonal que analiza una region del centelleograma situada alrededor del campo de vision del elemento principal. Este dispositivo se puede emplear, por l'o menos, de tres maneras diferentes: a) de manera ' n o rm a l' ; b) prescindiendo de la densidad general del registro y respondiendo solamente a pequenas variaciones, fijando asi su propio nivel de corte; c) indicando solamente cambios bruscos de densidad. Tambien parecen posibles otros procedimientos de empleo. Ese dispositivo relativamente sencillo y poco costoso es sumamente util para la interpretacion de centelleogramas. (author) [Russian] Vlijanie usovershenstvovanij v skennirujushhem oborudovanii ne chuvstvovalos' polnost'ju na klinicheskom urovne v znachitel'noj mere vvidu nedostatkov registracii skenn ogram m. Dlja uluchshenija izobrazhenija i kontrastnosti pri skenniorovanii byli razrabotany razlichnye instrumental'nye metody analiza. Avtory sozdali prostoj i sravnitel'no nedorogostojashhij registrirujushhij densitometr dlja ''povtornogo skennirovanija'' skennogramm. Legkij chuvstvitel'nyj jelement skenniruet diagrammu tochno t akzhe, kak skenner pacienta. Moshhnost' ustrojstv a javljaetsja ravnoj kojefficientu impul'sa, proporcional'nomu neprozrachnosti (ili peredache) izobrazhenija i mozhet i sp ol' zov at' sja dlja togo, chtoby sdelat' novoe ili ''reskennirovannoe'' i zobrazhenie. Ploshhad' diagrammy, s kotoroj obobshhaetsja informacija, ustanavlivaetsja otverstiem, snabzhennym chuvstvitel'nym jelementom. Shirokij diapazon kojefficientov moshhnosti impul'sov (ot 0 do 15 000 impul'sov v sekundu) vyzyvaet znachitel'noe i reguliroemoe uvelichenie kontrastnosti. Porogovyj kontrol' d a et ljuboj ''sokrashhennyj uroven'' vybora. Rabota provoditsja bystro, i diagramma mozhet byt' reskennirovana v techenie nebol'shogo promezhutka vremeni, neobhodim ogo dlja poluchenija pervonachal'nogo izobrazhenija. Issledovanija v oblasti klinicheskogo skennirovanija pochti ljubogo organa ili rajona., predstavljajushhego interes, pokazyvajut, chto rerazvertyvatel' daet informaciju, ne vidimuju snachala na di agram mah pri pervonachal'nom skennirovanii. Jeto bylo osobenno poleznym pri opredelenii st atisticheskogo znachenija nebol'shih izmenenij v kojefficiente scheta pri skennirujushhem izobrazhenii. . Pri diagrammah, poluchennyh metodom skennirovanija, bol'shogo dinamicheskogo diapazo n a , gle nikakoj otdel'nyj sokrashhennyj urov en' udovletv orit el'no ne pokazy vaet vse rajony, predstavljajushhie interes, vnov' byli neobhodimy rerazvertyvateli na nekotoryh sokrashhennyh urovnjah. V popytke preodolet' je t u trudnost' ispol'zovalsja dvuhdiapazonnyj chuvstvitel'nyj jel em en t , kotoryj ohvatyvaet rajon registracii vokrug o bl a sti nabljudenija glavnogo chuvstvitel'nogo jel em en t a . Po krajnej m er e , vozmozhny tri vida jek s pluatacii pribora s dvuhdiapazonnym chuvstvitel'nym jelemen tom: 1) ''normal'naja'' je k s pluatacija; 2) ignorirovanie obshhej plotnosti izobrazhenija i reakcija tol'ko na nebol'shie izmenenija, ustanavlivaja takim obrazom svoj sobstvennyj sokrashhennyj uroven'; 3) soobshhenie tol'ko o vnezapnyh izmenenijah v plotnosti registracii. Po-vidimomu, vozmozhny takzhe drugie vidy. Jeto sravnitel'no prostoj i nedorogostojashhij pribor obespechivaet okazanie cennoj pomoshhi v interpretacii diagramm, proizvedennyh metodom skennirovanija. (author)

  14. Design and construction of the equipment and obtention process of TeO{sub 2} for the {sup 131} I production; Diseno y construccion del equipo y proceso de obtencion de TeO{sub 2} para la produccion de {sup 131} I

    Energy Technology Data Exchange (ETDEWEB)

    Alanis M, J. [ININ, Departamento de Materiales Radiactivos, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2000-09-15

    This project was carried out in the National Institute of Nuclear Research, Nuclear Center of Mexico (ININ), with the name 'A New Method to Obtain {sup 131}I by Neutron Irradiation of TeO{sub 2} and it Dry Distillation'. This work establishes the optimal parameters to produce {sup 131}I by neutron irradiation and foundry of TeO{sub 2} sinterized. The TeO{sub 2} of high purity was produced adding HNO{sub 3} to the metallic tellurium (Merck 8100) and heating several samples to different temperatures until dryness in presence of an air current. The optimal conditions of temperature and reaction velocity were obtained, as well as of drying and sintering, to obtain TeO{sub 2} crystals with high purity able to retain the {sup 131}I produced by the radioactive decay. After drying and purified by the heating, the TeO{sub 2} was sinterized, applying a next temperature to it melting point by few minutes, enough to create cavities in the middle of it crystalline structure, where the {sup 131}I in gas form produced by the decay of the {sup 131}Te it is retained, one time that the TeO{sub 2} is bombarded with thermal neutrons in the nuclear reactor. Then, the reactions {sup 130}Te(n, {gamma}){sup 131}Te{sup m} (t{sub 1/2} = 30 h) and {sup 130}Te(n, {gamma}){sup 131}Te (t{sub 1/2} = 24.8 m) with an optimal irradiation time of 2.5 h. (Author)

  15. The Design and Performance of a Large High resolution Focusing Collimator; Etude d'un Grand Collimateur a Focalisation et Fort Pouvoir de Resolution: Resultats; Konstruktsiya i kharakteristika krupnogo fokusiruyushchego kollimatora s vysokoj stepen'yu razresheniya; Diseno y Funcionamiento de un Gran Colimador Enfocado de Alto Poder de Resolucion

    Energy Technology Data Exchange (ETDEWEB)

    Harris, C. C.; Bell, P. R.; Satterfield, M. M.; Ross, D. A.; Jordan, J. C. [Oak Ridge National Laboratory, TN (United States)

    1964-10-15

    The primary reason for use of a ''focusing collimator'' is to permit the use of a large detector giving increased counting rate without loss of spatial resolving power. Since many apertures aimed at a common point are used, a sort of ''focusing'' effect is achieved. Because the septa between the apertures are necessarily thin, penetration of these walls by gamma rays causes a loss of spatial resolution. Tungsten and gold have been used (for 3-in-diam. detectors) to reduce this penetration as compared with lead. Reducing penetration by using a longer lead collimator damages the main design objective, that of increased counting rate, unless a larger detector is also used. We have designed and constructed a 91-hole lead collimator for use with a 5.25-in (13. 5 cm) by 3-in (7.5 cm) NaI(Tl) detector. The focal point is 9.5 in (24 cm) from the detector, and the solid angle of ac ceptance is the same as focusing collimators in common use with 3 -in detectors. The maximum length is 6.5 in (16.5 cm); normal design length is 5.5 in (14 cm). At these lengths, the optical ''circles of resolution'' are 0.476 in (1.2 cm) and 0. 304 in (0.77 cm) respectively. The designs achieved the following: (1) A longer focal distance with an increase of counting efficiency due to the larger phosphor; (2) a lead collimator with a resolving power comparable with shorter gold c o llimators (a scan of a point source of Cs-Ba{sup 137} appears only 7 mm in diam.); (3) a high-resolution collimator for human and small animal scanning; (4) a basic assembly design for use with larger-solid-angle collimators for increased counting efficiency. Total-body scans have been made with Au{sup 198} and I{sup 131}. The scans indicate the increased efficiency and resolution of the 5.5-in collimator. A scan (Au198) of a dog with the 6.5 - in collimator showed well a concentration of activity apparently less than 1/4 in (6 mm) in diam.; the activity was only five times ''body background'' but was clearly separated by 1/4 in from a |- in diam. source about 50 times more intense. (author) [French] Le collimateur a focalisation a pour principal avantage de permettre l'emploi d'un grand detecteur pour augmenter le taux de comptage sans diminuer la resolution dans l 'espace. Un grand nombre d 'orifices etant orientes vers un point unique, on obtient une sorte d'effet ' d e focalisation ' Etant donne que les parois entre les orifices sont obligatoirement minces, la penetration de ces parois par les rayons gamma provoque une diminution de la resolution dans l'espace. Afin d'attenuer cette penetration, on a utilise, au lieu de plomb, le tungstene et l 'or pour les detecteurs de 7,5 cm de diametre. A moins d'utiliser aussi un plus grand detecteur, le fait d'utiliser un collimateur en plomb plus long pour reduire la penetration compromet l 'objectif essentiel de l 'etude de l 'appareil; qui est d'augmenter le taux de comptage. Les auteurs ont etudie et construit un collimateur en plomb, a 91 orifices, destine a etre utilise avec un detecteur a NaI(Tl) de 13,5 cm sur 7,5 cm. Le foyer est a 24 cm detecteur, et l'angle solide d'acceptation est le meme que pour les collimateurs a focalisation utilises couramment avec des detecteurs de 7,5 cm. La longueur maximum est de 16,5 cm; la longueur normale de l 'appareil etudie est de 14 cm. A ces longueurs, les 'cercles de resolution'optiques sont de 1,2 cm et 0,77 cm, respectivement. Les resultats de l 'etude sont les suivants: a) distance focale plus longue et augmentation de l 'efficacite de comptage, grace a l'emploi d'un scintillateur de plus grandes dimensions; b) collimateur en plomb, avec resolution comparable a c elle de collimateurs en or, plus courts (sur le scintigramme, l'image d'une source ponctuelle de Cs-{sup 137}Ba ne mesure que 7 mm de diametre); c) collimateur a fort pouvoir de resolution, pour la scintigraphie de l'homme et des petits animaux; d) ensemble standard destine a etre utilise avec des collimateurs a plus grand angle solide, en vue d'augmenter l'efficacite de comptage. Des scintigrammes de l'organisme entier ont ete obtenus au moyen de '{sup 198}Au et de {sup 131}I. Ces scintigrammes montrent que le collimateur de 14 cm a une plus grande efficacite et une plus grande resolution. Sur un scintigramme ({sup 198}Au) de chien obtenu au moyen du collimateur de 16,5 cm, on a discerne nettement une zone active d'un diametre apparent inferieur a 6 mm; l'activite n'etait que cinq fois superieure au bruit de fond du aux tissus, mais la zone active etait nettement separee par un espace d 0,6 cm d'une source environ cinquante fois plus intense ayant un diametre de 1,8 cm. (author) [Spanish] Los 'colimadores enfocados' permiten utilizar detectores de grandes dimensiones que dan un indice de recuento mayor sin perdida del poder de resolucion espacial. Como estos colimadores tienen muchos canales dirigidos hacia un mismo punto se obtiene con ellos una especie de efecto 'de enfoque'. Los tabiques de esc' canales son necesariamente delgados y, por consiguiente, le' rayos gamma los atraviesan en detrimento de la resolucion espacial. A fin de reducir esa penetracion se han empleado, para detectores de 3 pulg de diametro, colimadores de wolframio y oro, de preferencia a los de plomo. Si se reduce la penetracion empleando un colimador de plomo mas largo se malogra la finalidad perseguida ya que el indice de recuento disminuye, a no ser que se emplee tambien un detector de mayores dimensiones. Los autores han disenado y construido un colimador de plomo de 91 canales para emplearlo con un detector de Nal(Tl) de 5,25 pulg (13,5 cm) por 3 pulg (7,5 cm). El foco esta situado a 9,5 pulg (24 cm) del detector, y el angulo solido de admision es igual al de los colimadores enfocados que se emplean corrientemente con detectores de 3 pulg. La longitud maxima es de 6,5 pulg (16 ,5 cm); la normal es de 5,5 pulg (14 cm). Para estas longitudes, los 'circulos de resolucion' opticos son, respectivamente, de 0.476 pulg (1,2 cm) y 0,304 pulg (0,77 cm). Se han logrado las siguientes mejoras: a) un incremento de la distancia focal con un aumento de la eficacia de recuento debida al empleo de un cristal de mayores dimensiones; b) un colimador de plomo con un poder de resolucion comparable al de los colimadores de oro mas cortos (la imagen de una fuente puntiforme de Cs-137 Ba tiene solo 7 mm de diametro) ; c) un colimador de alto poder de resolucion para la exploracion en seres humanos y animales pequenos; d) una estructura basica disenada de modo que permite emplear co limadores de angulo solido mayor para incrementar la eficacia de recuento. Se han efectuado exploraciones del organismo entero con oro-198 y yodo-131. Las imagenes indican una mejora de la eficacia y del poder de resolucion del colimador de 5 ,5 pulg. La imagen de un perro obtenida con el colimador de 6,5 pulg en una exploracion efectuada con oro-198 mostro muy bien una concentracion de actividad de un diametro aparentemente de menos de 0,25 pulg (6 mm); la actividad era solo cinco veces mayor que el 'fondo corporal', pero quedaba claramente separada por 0,25 pulg de una fuente de 0,75 pulg de diametro unas 50 veces mas intensa. (author) [Russian] Osnovnaja prichina ispol'zovanija ''fokusirujushhego kollimatora'' svoditsja k t om u , chtoby pozvolit' ispol'zovat' krupnyj d et ek t or , dajushhij povyshennuju skorost' scheta b e z poteri prostranstvennoj razreshajushhej sp o so bn o s ti . Poskol'ku ispol'zuetsja neskol'ko apertur, napravlennyh na odnu obshhuju tochku, dosti ga et sja horoshij ''okusirujushhij'' jeffekt. Vvidu neobhodimosti imet' tonkuju peregorodku mezhdu aperturami, proniknovenie skvoz' jeti stenki gamma-luchej vyzyvaet poterju prostranstvennogo razreshenija. Byli ispol'zovany vol'fram i zoloto (dlja detektorov diametrom 7,5 sm) dlja togo, chtoby umen'shit' jeto , chto dalo vozmozhnost' provesti proniknovenie po sravneniju s t em , kogda primenjaetsja svinec. Umen'shenie proniknovenija za schet primenenija udlinennogo svincovogo kollimatora nanosit ushherb osnovnym konstrukcionnym celjam iz - z a uvelichenija skorosti sch et a , esli ne ispol'zuetsja takzhe krupnyj det ek tor. Avtory sproektirovali i sozdali svincovyj kollimator s 91 otverstiem dlja ispol'zovanija s d et ektorom NaJ (T 1 ) r a zm er om 13,5 h 7,5 s m . Fokus nahoditsja na rasstojanii 24 sm ot d et ek tora , a prostranstvennyj ugol vosprijatija analogichen uglam fokusirujushhih kollimatorov pri odnovremennom ispol'zovanii ih s detektorami na 7,5 sm . Maksimal'naja dlina sostavlja et 16,5 sm ; obychnaja dlina konstrukcii sost avlja et 14 sm . Pri dannyh velichinah dliny opticheskie ''okruzhnosti razreshenija'' sostavljajut sootvetstvenno 1,2 i 0,77 sm . Jeti konstrukcii dajut sledujushhee: 1 . Bol e e dlinnoe fokusnoe r a s stojan i e s odn o vremennym uvelicheniem jeffektivnosti scheta blagodarja b ol e e krupnomu ljuminoforu. 2 . Svincovyj kollimator s razreshajushhej sposobnost'ju, kotoruju mozhno sravnit' s bolee korotkimi kollimatorami iz zolot a (skennogramma t ochechnogo istochnika C s-V a 137 imeet di ametr v sego 7 m m ) . 3. Kollimator s vysokoj stepen'ju razreshenija dlja skennirovanija chelovecheskogo organizma i melkih zhivotnyh. 4. Osnovnaja konstrukcija sborki dlja ispol'zovanija kollimatorov s bolee krupnym prostranstvennym uglom dlja uvelichenija jeffektivnosti scheta. Polucheny skennogrammy v sego organizma s primeneniem zolota -198 i jod a -131. Obnaruzhena vozrosshaja jeffektivnost' i razreshenie 14-sm kollimatora. Na skennogramme sobaki s 16,5 sm kollimatorom horosho vidna koncentracija aktivnosti, imejushhaja, ochevidno, v Diametre menee 6m m; aktivnost',lish' v 5 raz prevyshajushhaja ''fon organizma'', vse zhe byla chetko otdelena rasstojaniem 6 mm ot istochnika diametrom 1,8 sm s bolee vysokim (v 50 raz) urovnem aktivnosti. (author)

  16. Design and calculation of optimum prototypes of solar bi convex refractoconcentractors realised in composites and analysis of its mechanic-structural and functional behavior; Diseno y calculo de prototipos optimos de refractoconcentradores biconvexos solares realizados en coposites y analisis de su comportamiento mecanico-estructural y funcional

    Energy Technology Data Exchange (ETDEWEB)

    Perez Calero, J. I.

    2008-07-01

    In the present work tries to study important paper which they carry out the Composites, in the complex process of the design of solar bi convex refractive concentrators, that would be unthinkable and irrealizables without the aid of them, when having necessary the technical characteristics that they make them viable. It contributes, also, the methodologies followed for the accomplishment of optimal prototypes, by means of Numeric Methods (specially Finite elements) and experimental, on simple prototypes and of characterization of composite laminates. (Author)

  17. Neural network design with combined backpropagation and creeping random search learning algorithms applied to the determination of retained austenite in TRIP steels; Diseno de redes neuronales con aprendizaje combinado de retropropagacion y busqueda aleatoria progresiva aplicado a la determinacion de austenita retenida en aceros TRIP

    Energy Technology Data Exchange (ETDEWEB)

    Toda-Caraballo, I.; Garcia-Mateo, C.; Capdevila, C.

    2010-07-01

    At the beginning of the decade of the nineties, the industrial interest for TRIP steels leads to a significant increase of the investigation and application in this field. In this work, the flexibility of neural networks for the modelling of complex properties is used to tackle the problem of determining the retained austenite content in TRIP-steel. Applying a combination of two learning algorithms (backpropagation and creeping-random-search) for the neural network, a model has been created that enables the prediction of retained austenite in low-Si / low-Al multiphase steels as a function of processing parameters. (Author). 34 refs.

  18. Control system design for the deethanizer absorber tower pressure in the light end unit of the Nico Lopez refinery; Diseno del sistema de control para la presion en la torre absorvedora deetanizadora de la unidad de finales ligeros de la refineria Nico Lopez

    Energy Technology Data Exchange (ETDEWEB)

    Morales Corral, Camilo [Refineria Nico Lopez, Ciudad Habana (Cuba)]. E-mail: Camilo.morales@refhab.cupet.cu; Pedre Mendoza, Isabel [DAISA, Ciudad Habana (Cuba)]. E-mail: Isabel@daisa.copextel.com.cu; Garcini Leal, Hector J. [Instituto Superior Politecnico Jose A. Echeverria, La Habana (Cuba)]. E-mail: garcini,novi@electrica.cujae.edu.cu; Fernandez, Luis M. [Instituto de Cibernetica, Matematica y Fisica, La Habana (Cuba)]. E-mail: luis@icmf.inf.cu; Benitez Gonzalez, Ivon Oristela [Instituto Superior Politecnico Jose A. Echeverria, La Habana (Cuba)

    2010-11-15

    This paper is about pressure feed forward control. It is for an absorber tower of the Light End Unit. This one is in the Havana Oil Refinery. Control loop was designed using identification technic and simulation software. Moreover the design control loop has been validated and his quality has been determined. [Spanish] En el presente trabajo se aborda un control anticipatorio de presion. Fue desarrollado para la torre absorvedora de la Unidad de Finales Ligeros. La cual pertenece a la refineria de La Habana. Fue disenado un lazo de control empleando tecnicas de identificacion y programas de simulacion. Ademas el lazo disenado es validado y se determina su calidad.

  19. Stretched membrane heliostats: design and structural analysis of reflectance module and support of a heliostats of 9 m. diaform and 60 m''3 of reflectance surface; Dis