WorldWideScience

Sample records for discusses development structure

  1. Development of the Huddle Observation Tool for structured case management discussions to improve situation awareness on inpatient clinical wards.

    Edbrooke-Childs, Julian; Hayes, Jacqueline; Sharples, Evelyn; Gondek, Dawid; Stapley, Emily; Sevdalis, Nick; Lachman, Peter; Deighton, Jessica

    2018-05-01

    'Situation Awareness For Everyone' (SAFE) was a 3-year project which aimed to improve situation awareness in clinical teams in order to detect potential deterioration and other potential risks to children on hospital wards. The key intervention was the 'huddle', a structured case management discussion which is central to facilitating situation awareness. This study aimed to develop an observational assessment tool to assess the team processes occurring during huddles, including the effectiveness of the huddle. A cross-sectional observational design was used to psychometrically develop the 'Huddle Observation Tool' (HOT) over three phases using standardised psychometric methodology. Huddles were observed across four NHS paediatric wards participating in SAFE by five researchers; two wards within specialist children hospitals and two within district general hospitals, with location, number of beds and length of stay considered to make the sample as heterogeneous as possible. Inter-rater reliability was calculated using the weighted kappa and intraclass correlation coefficient. Inter - rater reliability was acceptable for the collaborative culture (weighted kappa=0.32, 95% CI 0.17 to 0.42), environment items (weighted kappa=0.78, 95% CI 0.52 to 1) and total score (intraclass correlation coefficient=0.87, 95% CI 0.68 to 0.95). It was lower for the structure and risk management items, suggesting that these were more variable in how observers rated them. However, agreement on the global score for huddles was acceptable. We developed an observational assessment tool to assess the team processes occurring during huddles, including the effectiveness of the huddle. Future research should examine whether observational evaluations of huddles are associated with other indicators of safety on clinical wards (eg, safety climate and incidents of patient harm), and whether scores on the HOT are associated with improved situation awareness and reductions in deterioration and adverse

  2. Theses "Discussion" Sections: A Structural Move Analysis

    Nodoushan, Mohammad Ali Salmani; Khakbaz, Nafiseh

    2011-01-01

    The current study aimed at finding the probable differences between the move structure of Iranian MA graduates' thesis discussion subgenres and those of their non-Iranian counterparts, on the one hand, and those of journal paper authors, on the other. It also aimed at identifying the moves that are considered obligatory, conventional, or optional…

  3. Structural Changes in Online Discussion Networks

    Yang, Yang; Medaglia, Rony

    2014-01-01

    Social networking platforms in China provide a hugely interesting and relevant source for understanding dynamics of online discussions in a unique socio-cultural and institutional environment. This paper investigates the evolution of patterns of similar-minded and different-minded interactions ov...

  4. Discussion

    Sutcliffe, W.G.

    1991-01-01

    This is an edited transcript of the recorded discussions that followed the presentation of each paper and on the general comments at the conclusion of the session. No attempt was made to identity those who offered comments or asked questions

  5. Review of intense irradiation data and discussion on structural integrity

    Suzuki, K.; Jitsukawa, S.; Okubo, N. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan)

    2007-07-01

    Full text of publication follows: Mechanical property data on austenitic stainless steels and F82H have been reviewed to discuss for developing structural integrity methodologies of intensely irradiated components such as first walls. The following have been already clarified: (1) Fracture ductility is still high even though tensile rupture elongation is reduced remarkably. (2) Strain-hardening occurs in true stress-logarithmic strain (true strain) relationship. Work-softening behavior observed in nominal stress-nominal strain curves is simply resulted from a reduction of work hardening rate accompanied by the increase of flow stress level by irradiation. The review lead to an innovative design concept for application to intensely irradiated components. A special consideration is given to unique feature of bending moment in developing design methodology for preventing ductile fracture of intensely irradiated materials. Another discussion is also made on how to simulate mechanical behavior of intensely irradiated components, because mechanical testing of component-wise specimens after intense irradiation is inevitable for the development of design concepts, although irradiation on such a large scale specimen seems to be almost impossible with current irradiation facilities. (authors)

  6. Discussion Tool Effects on Collaborative Learning and Social Network Structure

    Tomsic, Astrid; Suthers, Daniel D.

    2006-01-01

    This study investigated the social network structure of booking officers at the Honolulu Police Department and how the introduction of an online discussion tool affected knowledge about operation of a booking module. Baseline data provided evidence for collaboration among officers in the same district using e-mail, telephone and face-to-face media…

  7. Discussion: How different can perspectives on L2 development be?

    Hulstijn, J.H.

    2015-01-01

    In this article I discuss the contributions to this special issue of Language Learning on orders and sequences in second language (L2) development. Using a list of questions, I attempt to characterize what I see as the strengths, limitations, and unresolved issues in the approaches to L2 development

  8. Ice forces on marine structures. Volume 2, discussion

    Marcellus, R W; Morrison, T B; Allyn, N F.B.; Croasdale, K R; Iyer, H S; Tseng, J

    1988-01-01

    A comprehensive state-of-the-art review is provided of the current methodologies in use for estimating the impact of ice forces on various kinds of marine structures: vertical sided or sloping stationary structures, floating structures, and artificial islands. Introductory chapters present ice statistics from selected Canadian marine regions, the failure modes and mechanical properties of ice, and general principles of ice/structure interactions. The methods for calculating ice loads are basically alternative methods for predicting the behavior of ice under different loading conditions; as such, none of the models have been successful in predicting the behavior of ice under all loading conditions. Currently the only reliable method for accurately predicting ice forces on marine structures is to use large-scale empirical data for ice of the same state as that predicted for design. Extrapolation from ice behavioral data at a smaller scale or ice of a different state is generally required. In comparison to current uncertainties, reasonably accurate estimates of upper bound static ice forces can be made, and a design approach using this upper bound force is appropriate for very massive rigid structures and in designing for overall global stability. The periodicity of ice forces also needs to be considered in terms of dynamic amplification of structure deformation, potential liquefaction of soils, and fatigue life. In certain cases, the deflection of the structure can change the ice failure process and therefore change the level and nature of the ice force. 221 refs., 171 figs., 19 tabs.

  9. Discussing Picturebooks across Perceptual, Structural and Ideological Perspectives

    Youngs, Suzette; Serafini, Frank

    2013-01-01

    Classroom discussions of multimodal texts, in particular historical fiction picturebooks, offer an interpretive space where readers are positioned to construct meanings in transaction with the written language, visual images, and design elements created by authors, illustrators and publishers (Serafini & Ladd, 2008; Sipe, 1999). This study was…

  10. Learning within Incoherent Structures: The Space of Online Discussion Forums.

    Thomas, Matthew J. W.

    2002-01-01

    Presents results from a study of undergraduate students' learning outcomes and patterns of interaction within an online discussion forum. Topics include social dynamics of computer-mediated communication versus face-to-face communication; cognitive engagement; critical and reflective thinking; and student interaction. (Author/LRW)

  11. Nanotherapeutics--product development along the "nanomaterial" discussion.

    Wacker, Matthias G

    2014-03-01

    Nanomaterials have become part of formulation development in the pharmaceutical industry and offer exciting opportunities in the area of targeted drug delivery. But they may also exert unexpected toxicities and potentially pose a threat to human health and the environment. Since the Scientific Committee on Emerging and Newly Identified Health Risks recommended a definition of "nanomaterials" for implementation into the existing and upcoming regulatory framework in the European Union, a discussion about safety requirements of new nanoscale products has emerged. At the same time, the Food and Drug Administration of the United States still observes recent developments in this area. Although the impact on the pharmaceutical product chain is still uncertain, guidelines on risk assessment in food products and cosmetics are available and offer a preview of future developments in the regimens of pharmaceuticals. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  12. Extracting the Discussion Structure in Comments on News-Articles

    Schuth, A.; Marx, M.; de Rijke, M.

    2007-01-01

    Several on-line daily newspapers offer readers the opportunity to directly comment on articles. In the Netherlands this feature is used quite often and the quality (grammatically and content-wise) is surprisingly high. We develop techniques to collect, store, enrichand analyze these comments. After

  13. Discussion about the design for mesh data structure within the parallel framework

    Shi Guangmei; Wu Ruian; Wang Keying; Ji Xiaoyu; Hao Zhiming; Mo Jun; He Yingbo

    2010-01-01

    The mesh data structure, one of the fundamental data structure within the parallel framework, its design and realization level have an effect upon parallel capability of the parallel framework. Through the architecture and the fundamental data structure within some typical parallel framework relatively analyzed, such as JASMIN, SIERRA, and ITAPS, the design thought of parallel framework is discussed. Through borrowing ideas from layered set of services design about the SIERRA Framework, and combining with the objective of PANDA Framework in the near future, this paper present the rudimentary system about PANDA framework layered set of services. On this foundation, detailed introduction is placed in the definition and the management of the mesh data structure that it is located in the underlayer of the PANDA framework. The design and realization about parallel distributed mesh data structure of PANDA are emphatically discussed. The PANDA framework extension and application program development based on PANDA framework are grounded on our efforts.

  14. Developing fair compensation structures

    Trousdale, W.J.

    1998-01-01

    The issue of finding an effective way to incorporate Aboriginal values into the process of developing fair compensation structures was discussed. This paper discusses pricing intangible values using dollars, but it was emphasized that 'values' are whatever are important to us. Therefore, in order to achieve fair compensation, creative alternatives that are value-focused should be pursued. In addition to the more straight-forward monetary compensation, compensation could also be about avoiding losses, mitigating adverse impacts, achieving better communication, and promoting cultural understanding. 25 refs., 2 tabs

  15. Discussion and Future Directions for Eye Tracker Development

    Hansen, Dan Witzner; Mulvey, Fiona; Mardanbegi, Diako

    2011-01-01

    Eye and gaze tracking have a long history but there is still plenty of room for further development. In this concluding chapter for Section 6, we consider future perspectives for the development of eye and gaze tracking.......Eye and gaze tracking have a long history but there is still plenty of room for further development. In this concluding chapter for Section 6, we consider future perspectives for the development of eye and gaze tracking....

  16. A Discussion of Professional Identity Development in Nursing Students

    Cathy Maginnis

    2018-04-01

    Full Text Available Becoming a nurse requires development of professional capabilities, specifically socialisation into the profession and developing a professional identity (PI. A search of the literature highlights a lack of empirical research in PI development during pre-registration nursing education. A range of factors will be explored that relate to PI, including identity, professional socialisation, a sense of belonging to the profession and clinical placement. Exploring the development of a PI in nursing students can assist with identifying drivers and inhibitors. The aim of this paper is to describe PI development in pre-registration nursing students’ education and the relationship between development of a PI and the tertiary provided education. There are a multitude of factors that impact on developing a PI such as identity, professional socialisation, belonging, clinical placements and educators. Nursing students predominantly develop a nursing PI in the pre-registration program with professional socialisation through exposure to academia, clinical practice and role models. The onus of responsibility for developing a PI in nursing students is attributed to educational institutions. An expected outcome of the pre-registration program is that nursing students will have formed a PI. A greater depth of understanding PI is important in supporting the education of the nurses of the future. There may not be one simple explanation for what PI is, or how it is developed, but a greater depth of understanding of PI by both the tertiary sector and the nursing profession is important in supporting the education of the nurses of the future. Further research will enable a dialogue describing the development of a PI in nursing students and an understanding of the attributes and conceptions attributed to a nursing PI.

  17. Discussion on the Development of Green Chemistry and Chemical Engineering

    Zhang, Yunshen

    2017-11-01

    Chemical industry plays a vital role in the development process of national economy. However, in view of the special nature of the chemical industry, a large number of poisonous and harmful substances pose a great threat to the ecological environment and human health in the entire process of raw material acquisition, production, transportation, product manufacturing, and the final practical application. Therefore, it is a general trend to promote the development of chemistry and chemical engineering towards a greener environment. This article will focus on some basic problems occurred in the development process of green chemistry and chemical engineering.

  18. The development and discussion of computerized visual perception assessment tool for Chinese characters structures - Concurrent estimation of the overall ability and the domain ability in item response theory approach.

    Wu, Huey-Min; Lin, Chin-Kai; Yang, Yu-Mao; Kuo, Bor-Chen

    2014-11-12

    Visual perception is the fundamental skill required for a child to recognize words, and to read and write. There was no visual perception assessment tool developed for preschool children based on Chinese characters in Taiwan. The purposes were to develop the computerized visual perception assessment tool for Chinese Characters Structures and to explore the psychometrical characteristic of assessment tool. This study adopted purposive sampling. The study evaluated 551 kindergarten-age children (293 boys, 258 girls) ranging from 46 to 81 months of age. The test instrument used in this study consisted of three subtests and 58 items, including tests of basic strokes, single-component characters, and compound characters. Based on the results of model fit analysis, the higher-order item response theory was used to estimate the performance in visual perception, basic strokes, single-component characters, and compound characters simultaneously. Analyses of variance were used to detect significant difference in age groups and gender groups. The difficulty of identifying items in a visual perception test ranged from -2 to 1. The visual perception ability of 4- to 6-year-old children ranged from -1.66 to 2.19. Gender did not have significant effects on performance. However, there were significant differences among the different age groups. The performance of 6-year-olds was better than that of 5-year-olds, which was better than that of 4-year-olds. This study obtained detailed diagnostic scores by using a higher-order item response theory model to understand the visual perception of basic strokes, single-component characters, and compound characters. Further statistical analysis showed that, for basic strokes and compound characters, girls performed better than did boys; there also were differences within each age group. For single-component characters, there was no difference in performance between boys and girls. However, again the performance of 6-year-olds was better than

  19. The Structure of Discussions in an Online Communication Course: What Do Students Find Most Effective?

    Jacobi, Laura

    2017-01-01

    The purpose of this study was to explore the perspectives of students regarding what was effective about the way in which the asynchronous discussions were structured in an upper level online organizational communication course. Surveys from 27 student participants were used, with questions focused upon the structure of discussions in the online…

  20. Investigating Move Structure of English Applied Linguistics Research Article Discussions Published in International and Thai Journals

    Amnuai, Wirada; Wannaruk, Anchalee

    2013-01-01

    This study investigates the rhetorical move structure of English applied linguistic research article Discussions published in Thai and international journals. Two corpora comprising of 30 Thai Discussions and 30 international Discussions were analyzed using Yang & Allison's (2003) move model. Based on the analysis, both similarities and…

  1. Space Structure Development

    Smith, Thomas

    2015-01-01

    The duration of my Summer 2015 Internship Tour at NASA's Johnson Space Center was spent working in the Structural Engineering Division's Structures Branch. One of the two main roles of the Structures Branch, ES2, is to ensure the structural integrity of spacecraft vehicles and the structural subsystems needed to support those vehicles. The other main objective of this branch is to develop the lightweight structures that are necessary to take humans beyond Low-Earth Orbit. Within ES2, my four projects involved inflatable space structure air bladder material testing; thermal and impact material testing for spacecraft windows; structural analysis on a joint used in the Boeing CST-100 airbag system; and an additive manufacturing design project.

  2. Discussion on the fracutre microscopic resistance by cleavage in structural steels

    Darwish, F.A.I.; Teixeira, J.C.G.; Ouro, C.R.

    1982-01-01

    An analysis on the physical significance of the microscopic resistance of a structural steel is presented. The theorethical and experimental aspects involved in the determination of this resistance are still presented. The results obtained with low, medium and high mechanical resistance are showed and discussed. (E.G.) [pt

  3. The Secrets of Plasticine Balls and the Structure of the Earth: Investigation through Discussion

    King, Chris

    2002-01-01

    Balls made of modelling clay (Plasticine[TM]) can be used to generate a classroom discussion about the scientific evidence used to determine the structure of the Earth. This allows pupils to appreciate how evidence is used to support hypotheses and to distinguish fact from hypothesis. It also provides opportunity to correct misconceptions held by…

  4. PRSEUS Structural Concept Development

    Velicki, Alex; Jegley, Dawn

    2014-01-01

    A lighter, more robust airframe is one of the key technological advancements necessary for the successful launch of any large next-generation transport aircraft. Such a premise dictates that considerable improvements beyond current state-of-the-art aluminum structures is needed, and that improvements of this magnitude will require an extensive use of composite materials that are not only lightweight, but also economical to produce. To address this challenge, researchers at NASA and The Boeing Company are developing a novel structural concept called the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) under the Environmentally Responsible Aviation (ERA) Project. It is an integrally stiffened panel concept that is stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. In addition to improved structural performance, an important facet of this unique arrangement of stitched carbon fibers is its innovative manufacturing method that has the potential to lower fabrication costs by eliminating fasteners and autoclave cures. The rationale and development status for this new approach forms the basis of the work described in this paper. The test specimens described herein were fabricated, or are currently being fabricated, by The Boeing Company, while the structural analyses and testing tasks are being performed by NASA and Boeing personnel.

  5. Discussion on organization structure system of nuclear power projects in China

    Wang Zhi

    2011-01-01

    With the development of the nuclear power industry in China, several AE companies were born and now play a major role in building nuclear power projects in China and overseas. After studying current organization structure systems of all nuclear power AE companies in China and comparing with successful foreign ones, this paper proposes some approaches to optimize the structure. (author)

  6. Generic Structure of Discussion Sections in ESP Research Articles across International and Iranian Journals

    Masoud Khalili Sabet

    2015-04-01

    Full Text Available Reviewing literature reveals that identifying generic structure of research articles (RAs in different fields of study, especially ESP, has received much attention. The major purpose behind such trends of research has been raising researchers' awareness of the common conventions in writing RAs. Along with this universal trend, a lot of genre studies have been done in Iranian context; however, it seems that ESP RAs have not been paid due attention yet. Hence this study aimed at investigating the generic structure of ESP RAs in international and Iranian journals. Applying Kanoksilapatham's (2007 model to the compiled corpus, it was found that contextualizing the study (Move 1 and consolidating results (Move 2 were the obligatory moves in Discussion section of ESP RAs across international and Iranian journals. Evaluation of the findings was a new step found in international Discussion sections but absent in Iranian ones. Related discussion of these findings prepares the researchers for publishing in international and Iranian ESP journals. Keywords: ESP, Discussion section, Move, Step, Author presence, Generic structure

  7. Learning about the Literacy Development of English Language Learners in Asynchronous Online Discussions

    De Oliveira, Luciana C.; Olesova, Larisa

    2013-01-01

    This study examined asynchronous online discussions in the online course "English Language Development" to identify themes related to participants' learning about the language and literacy development of English Language Learners when they facilitated online discussions to determine whether the participants developed sufficient…

  8. Expert Cold Structure Development

    Atkins, T.; Demuysere, P.

    2011-05-01

    The EXPERT Program is funded by ESA. The objective of the EXPERT mission is to perform a sub-orbital flight during which measurements of critical aero- thermodynamic phenomena will be obtained by using state-of-the-art instrumentation. As part of the EXPERT Flight Segment, the responsibility of the Cold Structure Development Design, Manufacturing and Validation was committed to the Belgian industrial team SONACA/SABCA. The EXPERT Cold Structure includes the Launcher Adapter, the Bottom Panel, the Upper Panel, two Cross Panels and the Parachute Bay. An additional Launcher Adapter was manufactured for the separation tests. The selected assembly definition and manufacturing technologies ( machined parts and sandwich panels) were dictated classically by the mass and stiffness, but also by the CoG location and the sensitive separation interface. Used as support for the various on-board equipment, the Cold Structure is fixed to but thermally uncoupled from the PM 1000 thermal shield. It is protect on its bottom panel by a thermal blanket. As it is a protoflight, analysis was the main tool for the verification. Low level stiffness and modal analysis tests have also been performed on the Cold Structure equipped with its ballast. It allowed to complete its qualification and to prepare SONACA/SABCA support for the system dynamic tests foreseen in 2011. The structure was finally coated with a thermal control black painting and delivered on time to Thales Alenia Space-Italy end of March 201.

  9. Insertion and professional development of starting university professors: the need for spaces for pedagogical discussion

    Beatriz Maria Boessio Atrib Zanchet

    2016-01-01

    Full Text Available Current paper is the result of a research on twenty-eight starting university teachers in four universities in southern Brazil and seeks to understand their concern on pedagogical discussion spaces as a possible support for the development of their teaching practice. The research started from the point that starting teachers should insert themselves within higher education culture and find pedagogical support to develop their lectures. As a rule, they have recently obtained a doctoral degree, complying with the required academic title for their tenure, but with scanty or no pedagogical preparation. The subjects answered a semi-structured interview, with issues on the challenges, difficulties and possibilities of pedagogical support pointed out when they started their activities. The quantitative data form the corpus analyzed used in the analysis. The paper is based on studies by Garcia (1999, 2009b, Vaillant and Garcia (2012 and others. Results showed that pedagogical education and professional development of university professors, developed through pedagogical spaces, are essential for and welcomed by these teachers. An overall policy is required that valorizes the teaching tasks as fundamental for achieving teaching quality.

  10. "Global Human Resource Development" and Japanese University Education: "Localism" in Actor Discussions

    Yoshida, Aya

    2017-01-01

    The aim of this paper is to analyse the actions of various actors involved in "global human resource development" and to clarify whether discussions on global human resources are based on local perspectives. The results of the analysis are as follows: 1) after the year 2000 began, industry started discussions on global human resources in…

  11. It's Good to Talk: Discussion in Blended Learnng Courses in the Context of Continued Professional Development for Solicitors

    Rory O'Boyle

    2013-04-01

    Full Text Available This paper evaluates (a student perceptions of blended learning in the context of continued professional development courses for solicitors and (b student experience of discussion in such a blended learning course. Students in the Law Society of Ireland‟s Diploma in Employment Law partook in a blended learning course that contained face-to-face discussion and both asynchronous and synchronous online discussion as an essential feature of their learning experience. Students were asked to respond to self-completion interim and final questionnaires. The results suggest that „time poor‟ solicitors strongly approve of blended learning and their characteristics as independent, self-motivated learners mean they are well placed to fully participate in this form of learning; each method of discussion is valued by such students; the forms of such discussion, whether face-to-face, asynchronous or synchronous online discussion, can be complementary; the method of assessment has an important impact on student perceptions of the value of online discussion; and particular attention must be paid to framing synchronous discussion for it to be effective. With respect to implications for practice, the study confirms that blended learning is a valid means of course delivery in respect of continued professional development courses for solicitors and that such "time-poor" learners respond well to structured online discussion requiring mandatory postings.

  12. Discussing Sustainable Development among Teachers: An Analysis from a Conflict Perspective

    Hasslof, Helen; Ekborg, Margareta; Malmberg, Claes

    2014-01-01

    Education for Sustainable Development has been discussed as problematic, as a top down directive promoting an--"indoctrinating" education. The concept of the intertwined dimensions (economic, social-cultural, and environmental) of sustainable development is seen both as an opportunity and as a limitation for pluralistic views of…

  13. The development of system to promote discussion in the e-learning software of engineering ethics

    Matsue, K.; Ono, S.; Kimura, H.; Madarame, H.

    2005-01-01

    We developed the engineering ethics education program, which contains 'Case Study' program and 'Discussion' program in February 2004. We opened this education program on the WWW. In the result our program is useful for 'Case Study' program. So we found that 'Discussion' program should be improved more. In order to make discussion excite, it is necessary that we make new system to help users to consider the case example. So I provided the new systems, the 'discussion movie' and the 'vote button'. The discussion Movie is the system that it introduced the process to draw one solution of the case example. The vote button is the system by which users can express their own attitude for the opinion of the discussion movie, agree or disagree. In order to estimate these new systems, we carried out thus experimental test. We prepared 3 types of education program. SYSTEM1: Case Example, and BBS. SYSTEM2: Case Example, Discussion Movie, and BBS. SYSTEM3: Case Example, Discussion Movie, Vote Button, and BBS. We took test users into one of these 3 types of education program. And users took part in their own education program for a week. (authors)

  14. Developing the level of adoption survey to inform collaborative discussion regarding educational innovation

    Doug Orr

    2010-05-01

    Full Text Available Learning organizations rely on collaborative information and understanding to support and sustain professional growth and development. A collaborative self-assessment instrument can provide clear articulation and characterization of the level of adoption of innovation such as the use of instructional technologies. Adapted from the “Level of Use” (LoU and “Stages of Concern” indices, the Level of Adoption (LoA survey was developed to assess changes in understanding of and competence with emerging and innovative educational technologies. The LoA survey, while reflecting the criteria and framework of the original LoU from which it was derived, utilizes a specifically structured on-line, self-reporting scale of “level of adoption” to promote collaborative self-reflection and discussion. Growth in knowledge of, and confidence with, specific emergent technologies is clearly indicated by the results of this pilot study, thus supporting the use of collaborative reflection and assessment to foster personal and systemic professional development. Résumé : Les organisations apprenantes s’appuient sur des informations et une compréhension issues de la collaboration afin de soutenir et d’entretenir la croissance et le perfectionnement professionnels. Un instrument d’auto-évaluation collaboratif permet d’articuler et de caractériser de manière explicite le niveau d’adoption des innovations, comme l’utilisation de technologies éducatives, par exemple. Adapté à partir des indices de « niveau d’utilisation » (ou « LoU » pour Level of Use et de « niveaux de préoccupation », l’instrument d’enquête sur le niveau d’adoption (ou « LoA » pour Level of Adoption a été conçu afin d’évaluer les changements qui surviennent dans la compréhension des technologies éducatives émergentes et innovatrices ainsi que dans les compétences relatives à ces technologies. L’instrument d’enquête LoA, bien qu’il refl

  15. Highlights from panel discussion on key issues for future developments in microwave processing

    Gac, F.D.; Iskander, M.F.

    1992-01-01

    This paper reports on highlights from a panel discussion on Key Issues for Future Development in Microwave Processing. Although the panelists represented a mix of individuals from government, academia, and industry, only one aspect of industry was represented, namely microwave system manufacturers. For further panel discussions, it is recommended that the materials manufacturing (i.e., microwave user) sector also be represented. Three important points emerged from the panel discussion. The first deals with the credibility and usability of information, be it dielectric property measurements, experimental procedures, or microwave processing results. Second, a considerable communication and education gap continues to exist between the materials community and microwave engineers. Finally, a more realistic approach should be taken in identifying where microwave processing makes sense

  16. Developing College Students' Civic Identity: The Role of Social Perspective Taking and Sociocultural Issues Discussions

    Johnson, Matthew

    2015-01-01

    The development of college students' civic identity is understudied, but worthy of attention because of its salience to many students and higher education's commitment to fostering an engaged citizenry. Using 45,271 participants from the 2009 Multi-Institutional Study of Leadership, this study uses structural equation modeling to explore…

  17. Developing an Attitude Scale for Discussion Ability of Pre-service Teachers

    Gürbüz OCAK

    2015-01-01

    Full Text Available In this study, developing a scale to measure the attitudes towards the discussion ability of pre-service teachers indented. The application scale of the discussion ability was developed in the direction of the pre-service teachers. The scale is likert-type comprising of 57 items. The validity and reliability of the scale is done on the data gained from 200 students elected by the method of coincidental exemplification amount of the sophomore students. As a result of the factorial validity of the scale, items change between 0.59 and 0.76 and that the KMO Kaiser-Meyer-Olkin value is 0.867 and the value of (Cronbach alpha calculated for reliability study is 0.865. Findings related to the studies of validity and reliability show that the scale has a valid and reliable form.

  18. Discussing underrepresentation as a means to facilitating female students’ physics identity development

    Robynne M. Lock

    2016-07-01

    Full Text Available Despite the fact that approximately half of high school physics students are female, only 21% of physics bachelor’s degrees are awarded to women. In a previous study, drawn from a national survey of college students in introductory English courses, five factors commonly proposed to positively impact female students’ choice of a physical science career were tested using multivariate matching methods. The only factor found to have a positive effect was the explicit discussion of the underrepresentation of women in physics. In order to explore this further, a case study of the classes of one teacher reported to discuss the underrepresentation of women was conducted. Two classroom underrepresentation discussions were recorded, students and teacher were interviewed, and relevant student work was collected. Analyzing the case study data using a figured worlds framework, we found that discussing the underrepresentation of women in science explicitly creates an opportunity for students’ figured worlds of professional and school science to change, and facilitates challenging their own implicit assumptions about how the world functions. Subsequently, the norms in students’ figured worlds may change or become less rigid allowing for a new openness to physics identity development amongst female students.

  19. The Hidden Rule: A Critical Discussion of Harvard University's Governing Structure. [A Harvard Watch Report].

    Weissman, Robert

    The governing structure of Harvard University is reviewed, and the findings include the following: (1) Harvard's present administrative and governance structure utilize corporate techniques of management that allow the president to diffuse administrative tasks without diffusing power--the difficulty of locating responsibility in the decentralized…

  20. Monopoly control of the electric power network - a discussion of regime and the incentive structure

    Uthus, Baard Olav; Wangensteen, Ivar

    1999-01-01

    This report discusses the strong points and weak points of the income regulation imposed on local and regional network owners in Norway in 1997. This regulation is based on a formula containing the variables: initial income or initial cost, efficiency requirement, and increase of transported energy. These variables are important for the determination of the income and are discussed. The report discusses the problems that may arise from an individual income limit if socio-economically desirable measures are not commercially profitable. It is found that monopoly regulation based on income limits is a correct principle, but there are shortcomings in the current way of determining the income limit and improved methods should be worked out

  1. Structures and Technology Encouraging Discussion in Human Sexuality Courses: Strategies to Engage a Range of Students

    Angera, Jeffrey J.; Latty, Christopher R.

    2015-01-01

    Human sexuality courses are common across many college/university campuses. The methods of instruction typically encourage discussion to increase knowledge and critical thinking about self, relationships, and professional pathways. However, often the pedagogical practices do not include methods to draw out students with a range of personalities,…

  2. Sustainable development and CERN’s role: Panel discussion at the Globe

    CERN Bulletin

    2012-01-01

    On Thursday 21 June, on the occasion of the UN Rio+20 Conference on Sustainable Development, some ambitious ecological projects involving CERN and its technologies will be presented in an afternoon of lectures and discussions in the Globe. The event is an opportunity for people at CERN to discuss the Organization’s green credentials and their ecological impact on life in the local area.   “The Globe was seen as a metaphor for the planet and a symbol of sustainable development when it was known as the ‘Palace of Equilibrium’ at Expo02 in Switzerland. Now here at CERN, it is the perfect place to host a debate on the role of technology and innovation in this area," enthuses Bernard Pellequer, who is in charge of event planning for the venue. On the afternoon of 21 June, speakers will present several ambitious projects, such as the eco-neighbourhood “Les Vergers”, the Vernes lake in ...

  3. Nucleon structure in view of recent developments

    Martin, A.D.

    1993-01-01

    We review the present knowledge of the parton structure of the proton. We discuss recent developments concerning deep-inelastic scattering and parton distributions at small x, with emphasis on the predictions of perturbative QCD that are relevant to the experiment at HERA. (author). 37 refs, 16 figs, 1 tab

  4. Education, the Process of Attainment and the Structure of Inequality. Discussion Papers #393-77.

    Sorensen, Aage B.

    This paper analyzes the properties of the process of social and economic attainments in two contrasting situations: (1) when the process of attainment generates the distribution of attainments, and (2) when the structure of attainments is seen as exogenously determined. It is argued that the neoclassical economic theory of earnings determination…

  5. Analysis of structural dynamic data from Skylab. Volume 1: Technical discussion

    Demchak, L.; Harcrow, H.

    1976-01-01

    The results of a study to analyze data and document dynamic program highlights of the Skylab Program are presented. Included are structural model sources, illustration of the analytical models, utilization of models and the resultant derived data, data supplied to organization and subsequent utilization, and specifications of model cycles.

  6. Probabilistic Structural Analysis Theory Development

    Burnside, O. H.

    1985-01-01

    The objective of the Probabilistic Structural Analysis Methods (PSAM) project is to develop analysis techniques and computer programs for predicting the probabilistic response of critical structural components for current and future space propulsion systems. This technology will play a central role in establishing system performance and durability. The first year's technical activity is concentrating on probabilistic finite element formulation strategy and code development. Work is also in progress to survey critical materials and space shuttle mian engine components. The probabilistic finite element computer program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) is being developed. The final probabilistic code will have, in the general case, the capability of performing nonlinear dynamic of stochastic structures. It is the goal of the approximate methods effort to increase problem solving efficiency relative to finite element methods by using energy methods to generate trial solutions which satisfy the structural boundary conditions. These approximate methods will be less computer intensive relative to the finite element approach.

  7. Text mining for search term development in systematic reviewing: A discussion of some methods and challenges.

    Stansfield, Claire; O'Mara-Eves, Alison; Thomas, James

    2017-09-01

    Using text mining to aid the development of database search strings for topics described by diverse terminology has potential benefits for systematic reviews; however, methods and tools for accomplishing this are poorly covered in the research methods literature. We briefly review the literature on applications of text mining for search term development for systematic reviewing. We found that the tools can be used in 5 overarching ways: improving the precision of searches; identifying search terms to improve search sensitivity; aiding the translation of search strategies across databases; searching and screening within an integrated system; and developing objectively derived search strategies. Using a case study and selected examples, we then reflect on the utility of certain technologies (term frequency-inverse document frequency and Termine, term frequency, and clustering) in improving the precision and sensitivity of searches. Challenges in using these tools are discussed. The utility of these tools is influenced by the different capabilities of the tools, the way the tools are used, and the text that is analysed. Increased awareness of how the tools perform facilitates the further development of methods for their use in systematic reviews. Copyright © 2017 John Wiley & Sons, Ltd.

  8. Rural-urban migration and socioeconomic development in Ghana: some discussions.

    Twumasi-ankrah, K

    1995-01-01

    This article presents a discussion of rural-urban migration as a source of social and behavioral change in Ghana. It explores the extent to which the urban social environment in Ghana generates conflicts for migrants with a different value orientation and the degree of influence of the urban social environment on migrants' behavior. The first part of the discussion focuses on the nature of Ghana's urbanization process, the motivation and characteristics of rural-urban migrants, and the nature of the social interaction between migrants and the social urban environment. Migrants contribute directly and indirectly to rural development in many ways. Some urban migrants achieve economic and material wealth and, through their attachment to voluntary tribal associations, assist local community development. Government can augment this process of migrant investment in rural life by identifying these actions as patriotic efforts and awarding citizenship medals or challenge grants. Governments need to review their citizenship laws carefully in light of the "brain drain" issues in the new world order and maximize the flow of resources, technical skills, and ideas from international migrants. A high-quality rural labor force can be enticed to live in rural areas by offering higher salaries and benefits, low income tax rates, better housing, and rural electrification and sanitation. Private firms should be offered incentives to locate in rural areas and increase employment opportunities for rural labor. Career advancement of development planners should be tied to program success or some form of public accountability for careful allocation of resources in rural areas. Fertility policies should be sensitive to urban subgroups. Urban and rural social differences are minor and do not impede urban assimilation, but unemployment and underemployment are problems for many.

  9. OER research agenda discussion for Open Education 2006 (29/9) discussing the development of a research agenda for Open Educational Resources

    Bateman, P

    2006-01-01

    Full Text Available stream_source_info Bateman_2006_D.pdf.txt stream_content_type text/plain stream_size 17977 Content-Encoding UTF-8 stream_name Bateman_2006_D.pdf.txt Content-Type text/plain; charset=UTF-8     International Institute for Educational... Planning OER Research Agenda Discussion  for OpenEducation2006 (29/9) Discussing the development of a research agenda for Open  Educational Resources Convened by the IIEP Co­facilitated by  Peter Bateman (AVU)  and  Kim...

  10. Postgraduate Orthodontics Students' and Mentors' Perceptions of Portfolios and Discussion as Tools for Development of Reflection.

    Tonni, Ingrid; Mora, Luca; Oliver, Richard G

    2016-09-01

    The aim of this study was to analyze the effects of a portfolio learning strategy designed to develop students' reflection abilities in a postgraduate orthodontic program in the UK. Nine first-year postgraduate orthodontic students and seven mentors participated in the one-year program, which included a reflective portfolio, mentorship, and discussion. After the program, the students' and mentors' perceptions were collected using focus groups and individual interviews, respectively. The data were analyzed using thematic analysis. Four categories emerged. The first, reflection, was considered a skill to learn, and time was needed for students to fully understand its meaning and achieve its outcomes. The second theme, characteristics of reflection, was descriptive at the beginning and more critical at the end of the experience. The third theme, outcomes of reflection, involved students' improved problem-solving and action-planning abilities and increased self-awareness, motivation, confidence, and communication skills. In the fourth theme, stimulation of reflection, students did not agree with mentors regarding the importance of reflective writing, but they recognized the value of the portfolio's reflective log in facilitating the reflective process. There was greater agreement between students and mentors regarding discussions with mentors and among peers as tools to achieve higher levels of reflection. Overall, these students and mentors considered the strategy an effective tool for improving students' reflection.

  11. The Lake Bosumtwi impact structure in Ghana: A brief environmental assessment and discussion of ecotourism potential

    Boamah, Daniel; Koeberl, Christian

    Lake Bosumtwi is a natural inland freshwater lake that originated from a meteorite impact. The lake is becoming a popular tourist attraction in Ghana and has the potential to be developed as an ecotourism site in the future. However, there have been some unregulated human activities and unplanned infrastructure development, and there are increased levels of pollutants in the lake water. In order to make ecotourism at Lake Bosumtwi successful in the long term, the Lake Bosumtwi Development Committee has been formed to ensure that local people are empowered to mobilize their own capacities. It has been realized that an important criterion required to develop ecotourism in a socially responsible, economically efficient, and environmentally viable way is to foster a constructive dialogue between the local people and tourists about the needs of the indigenous people.

  12. Discussion to the effects and development of nuclear geological scientific and technical information

    Zhang Shucheng

    2010-01-01

    Nuclear geological scientific and technical information has played an important role in the national economic construction and energy development, as well as exploration of uranium geology. With the increasing difficulty of prospecting, both scientific research or geological prospecting work are increasingly dependent on scientific and technical information, so, nuclear geological research and services in the scientific and technical information have become an increasing concern. From effect of the information and information resources in scientific research, the article discusses the synthesis research and services in the nuclear geological scientific and technical information, and play the role of uranium geological prospecting in the period of 'Tenth Five-Year'. In the period of the 'Eleventh Five-Year' and the coming period, the authors proposes a conception that how to strengthen the digital construction of nuclear geology scientific literature, integrative information resources and development and utilization in the network environment; and outlooks a developing prospects, that is, how to more effectively apply modern information technology, so that provides a guarantee of information resources for the scientific research and production in the new round of exploration of uranium resources. (author)

  13. [Self-Determination in Medical Rehabilitation - Development of a Conceptual Model for Further Theoretical Discussion].

    Senin, Tatjana; Meyer, Thorsten

    2018-01-22

    Aim was to gather theoretical knowledge about self-determination and to develop a conceptual model for medical rehabilitation- which serves as a basis for discussion. We performed a literature research in electronic databases. Various theories and research results were adopted and transferred to the context of medical rehabilitation and into a conceptual model. The conceptual model of self-determination reflects on a continuum which forms of self-determination may be present in situations of medical rehabilitation treatments. The location on the continuum depends theoretically on the manifestation of certain internal and external factors that may influence each other. The model provides a first conceptualization of self-determination focusing on medical rehabilitation which should be further refined and tested empirically. © Georg Thieme Verlag KG Stuttgart · New York.

  14. Discussion on the exploration & development prospect of shale gas in the Sichuan Basin

    Dazhong Dong

    2015-01-01

    Full Text Available The Sichuan Basin, a hotspot and one of the most successful areas for shale gas exploration and development, can largely reflect and have a big say in the future prospect of shale gas in China. Through an overall review on the progress in shale gas exploration and development in the Sichuan Basin, we obtained the following findings: (1 the Sichuan Basin has experienced the marine and terrestrial depositional evolution, resulting in the deposition of three types of organic-matter-rich shales (i.e. marine, transitional, and terrestrial, and the occurrence of six sets of favorable shale gas enrichment strata (i.e. the Sinian Doushantuo Fm, the Cambrian Qiongzhusi Fm, the Ordovician Wufeng–Silurian Longmaxi Fm, the Permian Longtan Fm, the Triassic Xujiahe Fm, and the Jurassic Zhiliujing Fm; (2 the five key elements for shale gas accumulation in the Wufeng-Longmaxi Fm are deep-water shelf facies, greater thickness of organic-rich shales, moderate thermal evolution, abundant structural fractures, reservoir overpressure; and (3 the exploration and development of shale gas in this basin still confronts two major challenges, namely, uncertain sweet spots and potential prospect of shale gas, and the immature technologies in the development of shale gas resources at a depth of more than 3500 m. In conclusion, shale gas has been discovered in the Jurassic, Triassic and Cambrian, and preliminary industrial-scale gas has been produced in the Ordovician-Silurian Fm in the Sichuan Basin, indicating a promising prospect there; commercial shale gas can be produced there with an estimated annual gas output of 30–60 billion m3; and shale gas exploration and production experiences in this basin will provide valuable theoretical and technical support for commercial shale gas development in China.

  15. Home healthcare nurse retention and patient outcome model: discussion and model development.

    Ellenbecker, Carol Hall; Cushman, Margaret

    2012-08-01

    This paper discusses additions to an empirically tested model of home healthcare nurse retention. An argument is made that the variables of shared decision-making and organizational commitment be added to the model based on the authors' previous research and additional evidence from the literature. Previous research testing the home healthcare nurse retention model established empirical relationships between nurse, agency, and area characteristics to nurse job satisfaction, intent to stay, and retention. Unexplained model variance prompted a new literature search to augment understanding of nurse retention and patient and agency outcomes. Data come from the authors' previous research, and a literature search from 1990 to 2011 on the topics organizational commitment, shared decision-making, nurse retention, patient outcomes and agency performance. The literature provides a rationale for the additional variables of shared decision-making and affective and continuous organizational commitment, linking these variables to nurse job satisfaction, nurse intent to stay, nurse retention and patient outcomes and agency performance. Implications for nursing.  The new variables in the model suggest that all agencies, even those not struggling to retain nurses, should develop interventions to enhance nurse job satisfaction to assure quality patient outcomes. The new nurse retention and patient outcome model increases our understanding of nurse retention. An understanding of the relationship among these variables will guide future research and the development of interventions to create and maintain nursing work environments that contribute to nurse affective agency commitment, nurse retention and quality of patient outcomes. © 2011 Blackwell Publishing Ltd.

  16. Developing Mathematical Knowledge Through Class Discussion: One Teacher's Struggles in Implementing Reform

    Nelson, Rebecca S.

    1997-01-01

    The purpose of this case study was to examine the experience of one secondary mathematics teacher during his efforts to facilitate mathematical discussions in a secondary algebra class. Class discussions and interviews were documented and analyzed to investigate the patterns of discussion, the teacher's role in facilitating discussion, and the struggles encountered by the teacher through his attempts to enact reform-oriented strategies. The investigation focused on the teacher's vision for ...

  17. Development of the Chronic Pain Coding System (CPCS) for Characterizing Patient-Clinician Discussions About Chronic Pain and Opioids.

    Henry, Stephen G; Chen, Meng; Matthias, Marianne S; Bell, Robert A; Kravitz, Richard L

    2016-10-01

    To describe the development and initial application of the Chronic Pain Coding System. Secondary analysis of data from a randomized clinical trial. Six primary care clinics in northern California. Forty-five primary care visits involving 33 clinicians and 45 patients on opioids for chronic noncancer pain. The authors developed a structured coding system to accurately and objectively characterize discussions about pain and opioids. Two coders applied the final system to visit transcripts. Intercoder agreement for major coding categories was moderate to substantial (kappa = 0.5-0.7). Mixed effects regression was used to test six hypotheses to assess preliminary construct validity. Greater baseline pain interference was associated with longer pain discussions (P = 0.007) and more patient requests for clinician action (P = 0.02) but not more frequent negative patient evaluations of pain (P = 0.15). Greater clinician-reported visit difficulty was associated with more frequent disagreements with clinician recommendations (P = 0.003) and longer discussions of opioid risks (P = 0.049) but not more frequent requests for clinician action (P = 0.11). Rates of agreement versus disagreement with patient requests and clinician recommendations were similar for opioid-related and non-opioid-related utterances. This coding system appears to be a reliable and valid tool for characterizing patient-clinician communication about opioids and chronic pain during clinic visits. Objective data on how patients and clinicians discuss chronic pain and opioids are necessary to identify communication patterns and strategies for improving the quality and productivity of discussions about chronic pain that may lead to more effective pain management and reduce inappropriate opioid prescribing. © 2016 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. Panel discussion

    Anon.

    1980-01-01

    The panel discussion at the 10th Allianz Forum on 'Technology and Insurance' dealt with the following topics: New technologies: energy conversion (coal, petroleum, natural gas, nuclear energy, solar energy); infrastructure (transport, data processing); basic products (metallic materials, chemical products, pharmaceutical products); integrated products (microprocessors, production line machines) as well as new risks: political; general economic (financing, market structure); insurance-related, dangers to persons and property; reduction of risks. (orig.) [de

  19. Outer space structure and development

    Zeldovich, J.; Novikov, I.

    1975-01-01

    A brief account is presented answering the question of what in fact the outer space we observe consists of. The principle of spatial homogeneity of the universe and the idea of non-stationary cosmology are discussed. The origin and the future development of the universe are explained using the two above mentioned and some other hypotheses. (J.K.)

  20. Outer space structure and development

    Zeldovich, J; Novikov, I

    1975-10-01

    A brief account is presented answering the question of what in fact the outer space we observe consists of. The principle of spatial homogeneity of the universe and the idea of non-stationary cosmology are discussed. The origin and the future development of the universe are explained using the two above mentioned and some other hypotheses.

  1. new developments for control room habitability evaluation and analysis. Panel Discussion

    Cozens, Kurt O.; Harvey, Robert B. Jr.; Hayes, John J. Jr.; Jarosz, Gregory; Lagus, Peter L.; Taplett, Kenneth J.; Schultz, Stephen P.

    2001-01-01

    analysis. It also includes guidance on how to demonstrate adequate protection of control room operators against the effects of postulated external releases of radioactivity, toxic gas, or smoke. Finally, it provides guidance on the development of a control room integrity program to facilitate long-term maintenance of the control room envelope. Air in-leakage testing is recommended in the NEI guidance. The team recommends the completion of a baseline test to determine the amount of unfiltered CRE in-leakage and provides guidance on its performance. The test may be performed using the ASTM E741 tracer gas methodology or a component test methodology. Provisions are made for defining alternate test methods. The purpose of this baseline test is to determine if the in-leakage is consistent with that used in the CRH evaluation. Following presentations and discussions with the NRC staff and NEI industry representatives in December 2000, the Advisory Committee on Reactor Safeguards (ACRS) prepared a comment letter to the NRC staff,2 and the NRC staff provided a response. The ACRS concluded that the current draft version of NEI 99-03 can provide excellent guidance to industry to deal with CRH issues and to ensure compliance with the applicable regulations. In response, NRC agreed and indicated that NRC plans to work with NEI to further refine it. Several important open issues remained following substantial dialogue between industry and the NRC staff. These include the following: 1. the frequency and method of testing; 2. the basis for establishing test frequency; 3. the proper level of regulatory control of in-leakage; 4. consideration of radiation doses from design-basis accidents; at adjacent units; 5. guidance for addressing smoke generated outside the control room. The new regulatory guide is currently under development by the NRC staff and is expected to be published for public comment in the summer of 2001. The current positions espoused by the staff are preliminary and may

  2. The Allocation of Tasks and Competencies in Dutch Water Management : Discussions, developments and present state

    Mostert, E.

    1997-01-01

    This report discusses subsidiarity in Dutch water management and forms the Dutch contribution to the Water 21 Phase II report on subsidiarity. Rather than discussing the Dutch interpretations of the concept (the concept is used almost exclusively in relation to the European Union), this report

  3. Health, development and innovation: a contribution of the critical theory of technology to the discussion.

    Souza, Luis Eugenio Portela Fernandes de

    2016-11-03

    The relationships between health and socioeconomic development are diverse. These relationships find in the health economic complex a privileged ground for expression. The importance of health technologies increased exponentially since the middle of the 20th century, affecting health systems in terms of both, quality of care and economic aspects. In fact, the predominant model of care is based on fragmented, symptomatic therapy practices that encourages the use of products and services and promotes a passive participation of users rather than humanization of care. Overcoming this model requires changes in the health technology standards which, in turn, require changes in the technology standard of society. The critical theory of technology helps to understand the evolution of the industrial civilization. It enriches the discussion by suggesting the health economic complex be more sensibly adjusted to the requirements of comprehensive health care, and to inclusive and sustainable development. Resumo: As relações entre a saúde e o desenvolvimento socioeconômico são múltiplas. Essas relações têm o complexo econômico da saúde como o espaço privilegiado de sua expressão. A importância das tecnologias de saúde aumentou exponencialmente desde meados do século XX, com efeitos sobre os sistemas de saúde, tanto em qualidade da atenção, quanto em aspectos econômicos. Na realidade, predomina um modelo de atenção caracterizado por práticas fragmentadas, que enfatizam tratamentos sintomáticos, estimulam o consumismo de produtos e serviços e promovem, ao invés da humanização, uma participação passiva dos usuários. A superação desse modelo passa pela mudança do padrão tecnológico da saúde, que, por sua vez, exige a transformação do padrão tecnológico da sociedade. A teoria crítica da tecnologia ajuda a compreender a evolução da civilização industrial. Enriquece o debate, sugerindo uma conformação do complexo econômico da saúde mais

  4. What do the JAMA editors say when they discuss manuscripts that they are considering for publication? Developing a schema for classifying the content of editorial discussion.

    Dickersin, Kay; Ssemanda, Elizabeth; Mansell, Catherine; Rennie, Drummond

    2007-09-25

    In an effort to identify previously unrecognized aspects of editorial decision-making, we explored the words and phrases that one group of editors used during their meetings. We performed an observational study of discussions at manuscript meetings at JAMA, a major US general medical journal. One of us (KD) attended 12 editorial meetings in 2003 as a visitor and took notes recording phrases from discussion surrounding 102 manuscripts. In addition, editors attending the meetings completed a form for each manuscript considered, listing the reasons they were inclined to proceed to the next step in publication and reasons they were not (DR attended 4/12 meetings). We entered the spoken and written phrases into NVivo 2.0. We then developed a schema for classifying the editors' phrases, using an iterative approach. Our classification schema has three main themes: science, journalism, and writing. We considered 2,463 phrases, of which 87 related mainly to the manuscript topic and were not classified (total 2,376 classified). Phrases related to science predominated (1,274 or 54%). The editors, most of whom were physicians, also placed major weight on goals important to JAMA's mission (journalism goals) such as importance to medicine, strategic emphasis for the journal, interest to the readership, and results (729 or 31% of phrases). About 16% (n = 373) of the phrases used related to writing issues, such as clarity and responses to the referees' comments. Classification of editorial discourse provides insight into editorial decision making and concepts that need exploration in future studies.

  5. What do the JAMA editors say when they discuss manuscripts that they are considering for publication? Developing a schema for classifying the content of editorial discussion

    Rennie Drummond

    2007-09-01

    Full Text Available Abstract Background In an effort to identify previously unrecognized aspects of editorial decision-making, we explored the words and phrases that one group of editors used during their meetings. Methods We performed an observational study of discussions at manuscript meetings at JAMA, a major US general medical journal. One of us (KD attended 12 editorial meetings in 2003 as a visitor and took notes recording phrases from discussion surrounding 102 manuscripts. In addition, editors attending the meetings completed a form for each manuscript considered, listing the reasons they were inclined to proceed to the next step in publication and reasons they were not (DR attended 4/12 meetings. We entered the spoken and written phrases into NVivo 2.0. We then developed a schema for classifying the editors' phrases, using an iterative approach. Results Our classification schema has three main themes: science, journalism, and writing. We considered 2,463 phrases, of which 87 related mainly to the manuscript topic and were not classified (total 2,376 classified. Phrases related to science predominated (1,274 or 54%. The editors, most of whom were physicians, also placed major weight on goals important to JAMA's mission (journalism goals such as importance to medicine, strategic emphasis for the journal, interest to the readership, and results (729 or 31% of phrases. About 16% (n = 373 of the phrases used related to writing issues, such as clarity and responses to the referees' comments. Conclusion Classification of editorial discourse provides insight into editorial decision making and concepts that need exploration in future studies.

  6. What do the JAMA editors say when they discuss manuscripts that they are considering for publication? Developing a schema for classifying the content of editorial discussion

    Dickersin, Kay; Ssemanda, Elizabeth; Mansell, Catherine; Rennie, Drummond

    2007-01-01

    Background In an effort to identify previously unrecognized aspects of editorial decision-making, we explored the words and phrases that one group of editors used during their meetings. Methods We performed an observational study of discussions at manuscript meetings at JAMA, a major US general medical journal. One of us (KD) attended 12 editorial meetings in 2003 as a visitor and took notes recording phrases from discussion surrounding 102 manuscripts. In addition, editors attending the meetings completed a form for each manuscript considered, listing the reasons they were inclined to proceed to the next step in publication and reasons they were not (DR attended 4/12 meetings). We entered the spoken and written phrases into NVivo 2.0. We then developed a schema for classifying the editors' phrases, using an iterative approach. Results Our classification schema has three main themes: science, journalism, and writing. We considered 2,463 phrases, of which 87 related mainly to the manuscript topic and were not classified (total 2,376 classified). Phrases related to science predominated (1,274 or 54%). The editors, most of whom were physicians, also placed major weight on goals important to JAMA's mission (journalism goals) such as importance to medicine, strategic emphasis for the journal, interest to the readership, and results (729 or 31% of phrases). About 16% (n = 373) of the phrases used related to writing issues, such as clarity and responses to the referees' comments. Conclusion Classification of editorial discourse provides insight into editorial decision making and concepts that need exploration in future studies. PMID:17894854

  7. Accelerator structure development for NLC

    Hoag, H.A.; Deruyter, H.; Pearson, C.; Ruth, R.D.; Wang, J.W.; Schaefer, J.

    1993-04-01

    In the program of work directed towards the development of an X-Band Next Linear Collider accelerator structure, two different test accelerator sections have been completed, and a third is being fabricated. The first is a simple 30-cell constant-impedance section in which no special attention was given to surface finish, pumping, and alignment. The second is an 86-cell section in which the cells were precision diamond-turned by Texas Instruments Inc. The structure has internal water-cooling and vacuum pumping manifolds. Some design details are given for the third section, which is a 206-cell structure with cavities dimensioned to give a Gaussian distribution of dipole mode frequencies. It has conventional-machining surface finishes and external water and pumping manifolds. Component design, fabrication, and assembly brazing are described for the first two experimental sections

  8. Development of the field of structural physiology

    FUJIYOSHI, Yoshinori

    2015-01-01

    Electron crystallography is especially useful for studying the structure and function of membrane proteins — key molecules with important functions in neural and other cells. Electron crystallography is now an established technique for analyzing the structures of membrane proteins in lipid bilayers that closely simulate their natural biological environment. Utilizing cryo-electron microscopes with helium-cooled specimen stages that were developed through a personal motivation to understand the functions of neural systems from a structural point of view, the structures of membrane proteins can be analyzed at a higher than 3 Å resolution. This review covers four objectives. First, I introduce the new research field of structural physiology. Second, I recount some of the struggles involved in developing cryo-electron microscopes. Third, I review the structural and functional analyses of membrane proteins mainly by electron crystallography using cryo-electron microscopes. Finally, I discuss multifunctional channels named “adhennels” based on structures analyzed using electron and X-ray crystallography. PMID:26560835

  9. If the shoe fits: development of an on-line tool to aid practitioner/patient discussions about 'healthy footwear'.

    Farndon, Lisa; Robinson, Victoria; Nicholls, Emily; Vernon, Wesley

    2016-01-01

    A previous study highlighted the importance of footwear to individuals' sense of their identity, demonstrating that shoes must 'fit' someone socially, as well as functionally. However, unhealthy shoes can have a detrimental effect on both foot health and mobility. This project utilises qualitative social science methods to enable podiatrists to understand the broader contribution of footwear to patients' sense of themselves and from this an online toolkit was developed to aid footwear education. Semi-structured interviews were conducted with six podiatrists/shoe-fitters and 13 people with foot pathologies, some of whom also completed shoe diaries. These were supplemented with some follow-up interviews and photographs of participants' own shoes were taken to allow in-depth discussions. Four areas related to 'fit' were identified; practicalities, personal, purpose and pressures, all of which need to be considered when discussing changes in footwear. These were incorporated into an online toolkit which was further validated by service users and practitioners in a focus group. This toolkit can support podiatrists in partnership with patients to identify and address possible barriers to changing footwear towards a more suitable shoe. Enabling patients to make healthier shoe choices will help contribute to improvements in their foot health and mobility.

  10. The Transcendent Organization : A treatise on consciousness in organizations: theoretical discussion, conceptual development and empirical studies

    Gustavsson, Bengt

    1992-01-01

    Organizations are human constructs, and unless the organizational analysis takes into account a wider discussion of the relationship between the subject and the object the analysis ends up in relativism, anarchism, and confusion. There is a danger when we make the organization objective to such extent that it is viewed as an entity outside ourselves. Understanding of an organization is a collective phenomenon given by the prevailing fundamental assumptions in society, and is transferred by sy...

  11. Designing organizational structures: Key thoughts for development.

    Killingsworth, Patricia; Eschenbacher, Lynn

    2018-04-01

    Current strategies and concepts to consider in developing a system-level organizational structure for the pharmacy enterprise are discussed. There are many different ways to design an organizational structure for the pharmacy enterprise within a health system. The size of the organization, the number of states in which it operates, and the geographic spread and complexity of the pharmacy business lines should be among the key considerations in determining the optimal organizational and decision-making structures for the pharmacy enterprise. The structure needs to support incorporation of the pharmacy leadership (both system-level executives and local leaders) into all strategic planning and discussions at the hospital and health-system levels so that they can directly represent the pharmacy enterprise instead of relying on others to develop strategy on their behalf. It is important that leaders of all aspects of the pharmacy enterprise report through the system's top pharmacy executive, who should be a pharmacist and have a title consistent with those of other leaders reporting at the same organizational level (e.g., chief pharmacy officer). Pharmacy leaders need to be well positioned within an organization to advocate for the pharmacy enterprise and use all resources to the best of their ability. As the scope and complexity of pharmacy services grow, it is critical to ensure that leadership of the pharmacy enterprise is unified under a single pharmacy executive team. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  12. Discussion Graphs

    Kiciman, Emre; Counts, Scott; Gamon, Michael

    2014-01-01

    , time and other confounding factors, few of the studies that attempt to extract information from social media actually condition on such factors due to the difficulty in extracting these factors from naturalistic data and the added complexity of including them in analyses. In this paper, we present......Much research has focused on studying complex phenomena through their reflection in social media, from drawing neighborhood boundaries to inferring relationships between medicines and diseases. While it is generally recognized in the social sciences that such studies should be conditioned on gender...... a simple framework for specifying and implementing common social media analyses that makes it trivial to inspect and condition on contextual information. Our data model—discussion graphs—captures both the structural features of relationships inferred from social media as well as the context...

  13. How to Educate Engineers for/in Sustainable Development: Ten Years of Discussion, Remaining Challenges

    Mulder, Karel F.; Segalas, Jordi; Ferrer-Balas, Didac

    2012-01-01

    Purpose: The purpose of this paper is to analyse the process of changing engineering universities towards sustainable development (SD). It outlines the types of changes needed, both in respect of approaches, visions, philosophies and cultural change, which are crucial for engineering universities which want to implement sustainable development as…

  14. Agenda 21 for sustainable construction in developing countries: a discussion document

    International Council for Research and Innovation in Building and Construction, CIB

    2002-01-01

    Full Text Available 21 formulated at the Earth Summit in Rio and is published as a contribution to the Johannesburg World Summit on Sustainable Development. The aim of this document is to provide a research and development agenda and strategy for action for construction...

  15. A discussion on the sustainable development of 60Co irradiation processing in Jiangsu province

    Liu Chunquan; Zhu Jiating; Zhao Yongfu; Xie Zongchuan

    2005-01-01

    This article focuses on the situation of irradiation processing in Jiangsu Province after China's entered into WTO. Irradiation processing has been developed very rapidly in recent years. The potential problems were analyzed, and some proposals related with sustainable development were raised up. (authors)

  16. Contribution to the panel discussion on 'International developments in standards, rules and codes for pressure vessels'

    Puell, K.

    1992-01-01

    This contribution to the discussion describes the legal system for technical installations in its existing form in the Federal Republic of Germany. The standardization of technical requirements to meet EC Directives and European Standards requires an adjustment, to a limited extent, of the appurtenant legal prerequisites. Given the trend away from tried and tested control mechanisms in the form of third party inspection, there is imminent danger of a reduction in quality. This compels us to consider how to maintain nonetheless the level of safety that has already been reached. (orig.)

  17. Competency-structured case discussion in the morning meeting: enhancing CanMEDS integration in daily practice

    Hassan IS

    2015-05-01

    Full Text Available Imad Salah Hassan, Hadi Kuriry, Lina Al Ansari, Ali Al-Khathami, Mohammed Al Qahtani, Thari Al Anazi, Mahfooz Farooqui, Hamdan Al Jahdali Department of Medicine 1443, King Saud bin Abdulaziz University for Health Sciences, King Abdulaziz Medical City, Riyadh, Kingdom of Saudi Arabia Abstract: Outcome-focused, competency-based educational curricula have become the norm in residency training programs. The Canadian Medical Education Directives for Specialists (CanMEDS framework is one example of such a curriculum. However, models for incorporating all the competencies in everyday clinical practice have been difficult to accomplish. In this manuscript, a CanMEDS, competency-structured, acute case discussion in a regular morning meeting was undertaken. All the diagnostic and therapeutic interventions were explicitly organized and discussed under their respective CanMEDS competency headings. Post exercise, the majority of residents felt that they were more competent in all the competencies and indicated their willingness to continue having similarly structured acute case discussions in the future. Keywords: CanMEDS roles, residents, morning meeting

  18. A discussion on the development strategy of the Chinese debt market (Chinese version)

    Zhouying Gang; Chen Shiyuan

    2012-01-01

    This paper will review the development process of China\\\\\\'s government bond market, analyze the current situation and problems as well as the status of economic reform in China and for And make policy recommendations on the development of the government bond market in China from a strategic height, including the issuance of special treasury bonds to the implementation of the national economy Third of debt restructuring, further play the role of the government bond market in the interest rate...

  19. Round table discussion " Development of qualification framework in meteorology (TEMPUS QUALIMET)"

    Bashmakova, I.; Belotserkovsky, A.; Karlin, L.; Petrosyan, A.; Serditova, N.; Zilitinkevich, S.

    2010-09-01

    The international consortium has started implementing a project aimed at the development of unified framework of qualifications in meteorology (QualiMet), setting a system of recognition and award of qualifications up to Doctoral level based on standards of knowledge, skill and competence acquired by learners is underway. The QualiMet has the following specific objectives: 1. To develop standards of knowledge, skills and competence for all qualifications up to Doctoral level needed in all possible occupations meteorology learner can undertake, by July 2011 2. To develop reciprocally recognized rubrics, criteria, methods and tools for assessing the compliance with the developed standards (quality assurance), by July 2012 3. To set the network of Centers of Excellence as the primary designer of sample education programs and learning experiences, both in brick-and-mortar and distant setting of delivery, leading to achievement of the developed standards, by December 2012 4. To set a system of mutual international recognition and award of qualifications in meteorology based on the developed procedures and establishment of self-regulatory public organization, by December 2012 The main beneficiaries of the project are: 1. Meteorology learners from the consortium countries. They will be able to make informed decisions about available qualification choices and progression options and provided an opportunity for students and graduates to participate in the system of international continuous education. 2. Meteorology employers from the consortium countries, They will be able to specify the level of knowledge, skill and competence required for occupational roles, evaluate qualifications presented, connect training and development with business needs. 3. Students and academic staff of all the consortium members, who will gain the increased mobility and exchange the fluxes of culturally and institutionally diversified lecturers and qualified specialists

  20. Discussion of the development of China's leisure sports tourism based on symbol consumption theory

    Liu, Kai

    2017-08-01

    At present, both the sports and the tourism industries are developing by leaps and by bounds around the world, and at the same time the Chinese government has also issued some leisure sports-related policies and documents. Under the guidance of symbol consumption theory and drawing from the sports tourism mode of the foreign countries, the thesis attempts to throw light upon the Chinese leisure sports tourism, aiming to provide a theoretical support for the development of the leisure sports tourism sector in china.

  1. The national laboratory business role in energy technology research and development. Panel Discussion

    Sackett, John; Sullivan, Charles J.; Aumeier, Steve; Sanders, Tom; Johnson, Shane; Bennett, Ralph

    2001-01-01

    Full text of publication follows: Energy issues will play a pivotal role in the economic and political future of the United States. For reasons of both available supply and environmental concerns, development and deployment of new energy technologies is critical. Nuclear technology is important, but economic, political, and technical challenges must be overcome if it is to play a significant role. This session will address business opportunities for national laboratories to contribute to the development and implementation of a national energy strategy, concentrating on the role of nuclear technology. Panelists have been selected from the national laboratories, the U.S. Department of Energy, and state regulators. (authors)

  2. The Use of "Harry Potter and the Sorcerer's Stone" to Discuss Identity Development With Gifted Adolescents

    Frank, Andrew J.; McBee, Matthew T.

    2003-01-01

    This article examines the process of identity development in gifted adolescents and provides a theoretical and research-based explanation of its importance for influencing achievement and quality of life in adulthood. Teachers, counselors, and parents can use "Harry Potter and the Sorcerer's Stone" (Rowling, 1997) as a springboard into discussion…

  3. 76 FR 4895 - Workshop To Discuss Issues Related to the Potential Development of Multipollutant Science and...

    2011-01-27

    .... The EPA contractor, ICF International, Inc., is providing logistical support for the workshop. FOR... should be directed to Courtney Skuce at ICF International, Inc., telephone: 919-293-1660; e- mail: EPA... will be taken into account as EPA develops future plans, approaches, and processes for moving toward...

  4. Managing and developing key supplier relationships : An introduction to the special issue, discussion and implications

    Ivens, B.; van de Vijver, M.A.R.; Vos, G.C.J.M.

    2013-01-01

    This article provides an introduction to this special issue on managing and developing key supplier relationships. Key suppliers are increasingly seen as strategic assets of buying companies which need careful nurturing to fully utilize their potential for value creation. The six articles of this

  5. 75 FR 65281 - Public Meeting To Discuss NIOSH's Respirator Standards Development Efforts

    2010-10-22

    ... Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention (CDC... meeting will be open to the public, limited only by the space available. The meeting room accommodates... development of the concepts being considered for performance criteria of various classes of respirators...

  6. Kyoto Protocol: Debate on environment and development in the discussions on Climate Change

    Rodriguez S, Liliana

    2007-01-01

    The climatic behavior of the planet and its consequences has favored debates about the models of development of the countries responsible for the accelerated deterioration of the atmosphere and of the natural phenomena by these recurrent days. Nevertheless, countries as United States, after signing commitments as the Convention on Climatic Change, refuse to acquire the obligations of the Kyoto Protocol, from fear of undergoing deterioration in their economies. In this setting, where the nation responsible for the emission of approximately 36% of the turned out effect greenhouse gases result of the human action in the planet does not commit itself to adopt restrictive policies to make its models of production but friendly with the nature although these measures begin to be imposed to other nations as determining factors in the international commercial negotiations, seems to be that the adoption of the Kyoto Protocol for developing countries as Colombia is not absolutely beneficial

  7. [Discussion on releasing price of Chinese patent medicine to market economy to achieve sustainable development].

    Long, Xingchao; Huang, Luqi; Jiang, Erguo; Zhou, Yonghong; Xu, Yanfeng; Zheng, Shuhua; Ning, Xiaoling; Liu, Hongwei; Chen, Lin

    2012-02-01

    To analyze costs of the traditional Chinese medicine industry focusing on production costs. Data of 50 planted Chinese herbal medicines and 50 wild Chinese herbal medicines were summarized and analyzed to see the changes of price of Chinese herbal medicines. The derivative problems of limited price were analyzed by crude drug, quality of Chinese medicine and sustainable utilization of resource. The price of Chinese medicine shall be adapted to sustainable development of market economy.

  8. Developing ADUN e-Community Portal for Community in Malaysia: Announcement Module and Discussion Module

    Nur Fatin Binti Eisa; Ahmad Suhaimi Baharudin; Kamal Karkonasasi

    2016-01-01

    Nowadays, there are many government agencies had already developed a portal sites for their citizens. This kind of portal is found to be particularly useful to those who faced certain problem regarding their dissatisfaction on the government's service. However, the main disadvantage of such portal is the lack of their public services to the citizens. Thus, ADUN e-community portal is designed to utilize information and help ADUN to manage the complaints created by the community. By using th...

  9. Social existence: between subjective and objective conditions. Impact on the theoretical discussion on development

    Aura González Serna

    2012-01-01

    Full Text Available This article aims to instill reflections on the theoretical debate around the development. The premise for fixing the analysis is to consider the impact of modes of apprehending social existence, since it is demarcated between subjectivities and objective conditions. Different conceptions appear to interpret and represent the individual and collective imagination. Fragmentation between subjectivity and objectivity, constitute an impediment to understanding the generic nature of being that builds and permanently transformed the social existence.

  10. [W. Bion's contribution to the discussion on nature vs. nurture. Early development and psychosis].

    Spector, Ricardo

    2004-01-01

    This papers presents a Mother-baby model of interaction that generates the capacity to think, linked to emotional life. With this model is possible to shorten the distances between those who think that mental pathology is caused by constitutional factors and those who use the "tabula rasa" model and assume that the environment failures are the cause of the pathology. The relation between concreteness and abstraction is explored as the basis for the capacity to mental development.

  11. How to measure the international development of palliative care? A critique and discussion of current approaches.

    Loucka, Martin; Payne, Sheila; Brearley, Sarah

    2014-01-01

    A number of research projects have been conducted that aim to gather data on the international development of palliative care. These data are important for policy makers and palliative care advocates. The aim of this article was to provide a critical comparative analysis of methodological approaches used to assess the development and status of palliative care services and infrastructure at an international level. A selective literature review that focused on the methodological features of eight identified reports was undertaken. Reviewed reports were found to differ in adopted methodologies and provided uneven amounts of methodological information. Five major methodological limitations were identified (lack of theory, use of experts as source of information, grey literature, difficulties in ranking, and the problematic nature of data on service provision). A set of recommendations on how to deal with these issues in future research is provided. Measuring the international development of palliative care is a difficult and challenging task. The results of this study could be used to improve the validity of future research in this field. Copyright © 2014 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

  12. Energy research and development in the United Kingdom: a discussion document. [Monograph

    1976-01-01

    This paper provides a framework for the future planning of United Kingdom research and development in energy technologies. It contains the first steps in the formulation of a national energy R and D strategy. Decision on energy R and D must be taken in the light of the overall aims of energy policies. The main objectives of energy policy are to meet the energy needs of the country at minimum cost in real resources over time, while paying due regard to security of supply, to public safety, to protection of the environment and, where major change is in prospect, to the social consequences of change.

  13. Development of a Numerical Model for Orthogonal Cutting. Discussion about the Sensitivity to Friction Problem

    San Juan, M.; de la Iglesia, J. M.; Martín, O.; Santos, F. J.

    2009-11-01

    In despite of the important progresses achieved in the knowledge of cutting processes, the study of certain aspects has undergone the very limitations of the experimental means: temperature gradients, frictions, contact, etc… Therefore, the development of numerical models is a valid tool as a first approach to study of those problems. In the present work, a calculation model under Abaqus Explicit code is developed to represent the orthogonal cutting of AISI 4140 steel. A bidimensional simulation under plane strain conditions, which is considered as adiabatic due to the high speed of the material flow, is chosen. The chip separation is defined by means of a fracture law that allows complex simulations of tool penetration in the workpiece. The strong influence of friction on cutting is proved, therefore a very good definition of materials behaviour laws could be obtained, but an erroneous value of friction coefficient could notably reduce the reliability. Considering the difficulty of checking the friction models used in the simulation, from the tests carried out habitually, the most efficacious way to characterize the friction would be to combine simulation models with cutting tests.

  14. Introduction to the KWALON Experiment: Discussions on Qualitative Data Analysis Software by Developers and Users

    Jeanine C. Evers

    2010-11-01

    Full Text Available In this introduction to the KWALON Experiment and related conference, we describe the motivations of the collaborating European networks in organising this joint endeavour. The KWALON Experiment consisted of five developers of Qualitative Data Analysis (QDA software analysing a dataset regarding the financial crisis in the time period 2008-2009, provided by the conference organisers. Besides this experiment, researchers were invited to present their reflective papers on the use of QDA software. This introduction gives a description of the experiment, the "rules", research questions and reflective points, as well as a full description of the dataset and search rules used, and our reflection on the lessons learned. The related conference is described, as are the papers which are included in this FQS issue. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1101405

  15. Develop, Discuss, and Decide: How New Science Teachers Use Technologies to Advance Their Practice

    Ellis, Joshua Alexander

    For decades, there has been a nationwide demand to increase the number of science teachers in K-12 education (National Commission on Excellence in Education, 1983; National Research Council [NRC], 2007). This demand is in large part due to increases in state science graduation requirements. Teacher preparation programs have been preparing new science teachers on pace with the resulting increase in demand (Ingersoll & Merrill, 2010), however, shortages have continued as up to 50% of these new teachers leave the profession within their first five years of teaching (Smith & Ingersoll, 2004), creating a "revolving door" phenomenon as districts scramble to address this early attrition with yet more beginning teachers. We need to address what Ingersoll (2012) describes as the "greening" of the teaching force: the fact that an increasingly large segment of the teaching force is comprised of beginning teachers who are at a high risk of leaving the profession. The three related studies that comprise this dissertation focus on the role of technological interventions for in-service and pre-service science teachers. The context for the first two studies is TIN, an online induction program for beginning secondary science teachers. These two studies consider the impact of technological supports on the reflective practice of participating teachers. The design interventions included VideoANT (an online video annotation tool) and Teachers as Leaders roles (a structured response protocol) for the Venture/Vexation online forum activity. The context for the third study is T3-S, a university licensure course for pre-service science teachers designed to explore technology integration in secondary science classrooms. This study investigated the impact of pre-service teacher participation in the creation of an Adventure Learning (AL) environment (Doering, 2006) on their understanding of technological, pedagogical, and content knowledge (TPACK) and its role in their future science

  16. Development of annular coupled structure

    Kageyama, T.; Morozumi, Y.; Yoshino, K.; Yamazaki, Y.

    1992-01-01

    A π/2-mode standing-wave linac of an Annular Coupled Structure (ACS) has been developed for the 1-GeV proton linac of the Japanese Hadron Project (JHP). This ACS has four coupling slots between accelerating and coupling cells in order to overcome difficulties in putting the ACS to practical use. Two prototypes of a four-slot ACS (f = 1296 MHz, β = v/c = 0.8) have been constructed and tested: one with a staggered slot-orientation from cell to cell; and the other with a uniform one. The staggered configuration gives a larger coupling constant and a larger shunt impedance than the uniform one with the same size of coupling slot. Both models have been conditioned up to the design input RF power. The four-slot ACS gives a distortion-free accelerating field around the beam axis, while a Side-Coupled Structure cavity gives an accelerating field mixed with a TE111-like mode. (Author) 7 figs., 2 tabs., 9 refs

  17. On the encounter of health with education: Thenew school and its developments in discussion

    Marcelo Rito

    2017-03-01

    Full Text Available Based on Foucauldian ideas, the present studyaimed at analyzing the discursive games established on the encounter between health and Brazilian pedagogy from the 1920s – encounter which was featured by escolanovismo. Therefore, we analyzed, at first, some books from the Bibliotheca de Educação collection, carried out by key authors of the Movimento Escola Nova (New School Movement, in which emerges the primacy of that cognition would be subjected to pertinent procedures to brain physiology. In a second moment, we investigated academic papers in a set of contemporary educational journals dedicated to criticise hygienists, ideological or normative biases supposedly inherent to the New School, whose analyses have proved captive of a denunciatory approach to the relations of power-knowledge in force; these relations, according to the examined authors, generated unfailing pathologizing effects to school practices. As a conclusion, we suggested an analytical turning able to put into question approaches based on a priori notions, such as development, enlightenment and representation in favor of reflections focused on the uninterrupted game between subjective processes and veridiction policies that outline the current educational field.

  18. Highlights of the round table discussion on trends and future developments of the application of pressure to high Tc materials

    Chu, C.W.; Ayache, C.; Fietz, W.J.; Kourouklis, G.K.; Liarokapis, E.; Wijngaarden, R.

    1991-01-01

    A discussion of current trends and the future development of the application of pressure to high T c materials was initiated by a brief presentation by each panel member and followed by an active exchange among all participants in the Workshop. The current status of the study of high temperature superconductivity and the past, current, and future roles of pressure in that study were discussed

  19. Soil Retaining Structures : Development of models for structural analysis

    Bakker, K.J.

    2000-01-01

    The topic of this thesis is the development of models for the structural analysis of soil retaining structures. The soil retaining structures being looked at are; block revetments, flexible retaining walls and bored tunnels in soft soil. Within this context typical structural behavior of these

  20. Photonic Integrated Circuit (PIC) Device Structures: Background, Fabrication Ecosystem, Relevance to Space Systems Applications, and Discussion of Related Radiation Effects

    Alt, Shannon

    2016-01-01

    Electronic integrated circuits are considered one of the most significant technological advances of the 20th century, with demonstrated impact in their ability to incorporate successively higher numbers transistors and construct electronic devices onto a single CMOS chip. Photonic integrated circuits (PICs) exist as the optical analog to integrated circuits; however, in place of transistors, PICs consist of numerous scaled optical components, including such "building-block" structures as waveguides, MMIs, lasers, and optical ring resonators. The ability to construct electronic and photonic components on a single microsystems platform offers transformative potential for the development of technologies in fields including communications, biomedical device development, autonomous navigation, and chemical and atmospheric sensing. Developing on-chip systems that provide new avenues for integration and replacement of bulk optical and electro-optic components also reduces size, weight, power and cost (SWaP-C) limitations, which are important in the selection of instrumentation for specific flight projects. The number of applications currently emerging for complex photonics systems-particularly in data communications-warrants additional investigations when considering reliability for space systems development. This Body of Knowledge document seeks to provide an overview of existing integrated photonics architectures; the current state of design, development, and fabrication ecosystems in the United States and Europe; and potential space applications, with emphasis given to associated radiation effects and reliability.

  1. Use of Content Based Instruction and Socratic Discussion for ESL Undergraduate Biomedical Science Students to Develop Critical Thinking Skills

    Burder, Ronan L.; Tangalaki, Kathy; Hryciw, Deanne H.

    2014-01-01

    Content based language instruction can assist English as a second language (ESL) students to achieve better learning and teaching outcomes, however, it is primarily used to understand content, and may not help to develop critical analysis skills. Here we describe a pilot study that used a "Socratic" small-group discussion in addition to…

  2. Masculinities, Attachment Theory and Transformative Learning: A Discussion of Some Theoretical Considerations for Developing an Emotionally Secure Teaching Praxis

    Carberry, Damien

    2017-01-01

    This paper situates education as an integral component of the overall prison rehabilitation process. The article discusses how an educational practitioner's knowledge of attachment theory and masculinities can be utilized to develop a secure methodological teaching environment in the classroom of a prison education unit and create a space where…

  3. Summary discussions

    Ritchie, R.H.

    1982-01-01

    Remarks intended to highlight topics of importance for future research were made by three of the participants at the conclusion of the Seminar. A brief listing is given of topics discussed by each of these rapporteurs

  4. System reliability developments in structural engineering

    Moses, F.

    1982-01-01

    Two major limitations occur in present structural design code developments utilizing reliability theory. The notional system reliabilities may differ significantly from calibrated component reliabilities. Secondly, actual failures are often due to gross errors not reflected in most present code formats. A review is presented of system reliability methods and further new concepts are developed. The incremental load approach for identifying and expressing collapse modes is expanded by employing a strategy to identify and enumerate the significant structural collapse modes. It further isolates the importance of critical components in the system performance. Ductile and brittle component behavior and strength correlation is reflected in the system model and illustrated in several examples. Modal combinations for the system reliability are also reviewed. From these developments a system factor can be addended to component safety checking equations. Values may be derived from system behavior by substituting in a damage model which accounts for the response range from component failure to collapse. Other strategies are discussed which emphasize quality assurance during design and in-service inspection for components whose behavior is critical to the system reliability. (Auth.)

  5. Contributions to the discussion on the determinants of long-term human capital development in today's developing regions

    Prayon, Valeria

    2013-01-01

    This thesis makes use of the phenomenon of age-heaping as a proxy for basic numerical skills and assesses the long-term human capital development in today’s developing regions, mainly for the time period from 1880 to 1960. Although the age-heaping methodology is still quite new in the field of economic history capturing only a very basic aspect of human capital, many recent studies have demonstrated its usefulness as a proxy for basic numerical skills. This thesis contributes to this strand o...

  6. Application of deep geophysical data to the discussion on the relationship between deep faults, concealed over thrust napped structure and uranium metallogenesis in central-southern Jiangxi

    Jiang Jinyuan; Qi Liang

    1999-01-01

    Based on the comparative analysis and study on 10 profiles of telluric electromagnetic sounding (MT) and regional gravimetric, magnetic data and Moho surface, the deep geological-tectonic pattern of the central-southern Jiangxi is discussed. It is suggested that: the studied region belongs to the Soyth-China block; in the area along Pingxiang-Guangfeng, at the border with Yangzi block an approximately EW-trending mantle concave-mantle slope zone occurs; the NNE-NE trending mantle uplift-mantle slope-mantle concave structure is developed within the South-China block; deep fault zones are represented by variation sites of Moho surface. Then, a series of deep structures is inferred including the approximately EW-striking Pingxian-Guangfeng deep fault zone, the NNE-striking Fuzhou-Anyuan deep fault zone, the NNE-trending Fengcheng-Dayu deep fault zone, as well as the NE-striking Yudu-Ningdu over thrust napped and sliding thrust structural systems, the approximately E W-trending Le'an-Nancheng over thrust napped structural systems etc. According to the distribution of known uranium mineralizations it is confirmed that close time-space relation exists between the uranium metallogenesis and variations of Moho surface, and over thrust napped structures, providing clues for locating concealed uranium deposits

  7. Two-dimensional joint inversion of Magnetotelluric and local earthquake data: Discussion on the contribution to the solution of deep subsurface structures

    Demirci, İsmail; Dikmen, Ünal; Candansayar, M. Emin

    2018-02-01

    Joint inversion of data sets collected by using several geophysical exploration methods has gained importance and associated algorithms have been developed. To explore the deep subsurface structures, Magnetotelluric and local earthquake tomography algorithms are generally used individually. Due to the usage of natural resources in both methods, it is not possible to increase data quality and resolution of model parameters. For this reason, the solution of the deep structures with the individual usage of the methods cannot be fully attained. In this paper, we firstly focused on the effects of both Magnetotelluric and local earthquake data sets on the solution of deep structures and discussed the results on the basis of the resolving power of the methods. The presence of deep-focus seismic sources increase the resolution of deep structures. Moreover, conductivity distribution of relatively shallow structures can be solved with high resolution by using MT algorithm. Therefore, we developed a new joint inversion algorithm based on the cross gradient function in order to jointly invert Magnetotelluric and local earthquake data sets. In the study, we added a new regularization parameter into the second term of the parameter correction vector of Gallardo and Meju (2003). The new regularization parameter is enhancing the stability of the algorithm and controls the contribution of the cross gradient term in the solution. The results show that even in cases where resistivity and velocity boundaries are different, both methods influence each other positively. In addition, the region of common structural boundaries of the models are clearly mapped compared with original models. Furthermore, deep structures are identified satisfactorily even with using the minimum number of seismic sources. In this paper, in order to understand the future studies, we discussed joint inversion of Magnetotelluric and local earthquake data sets only in two-dimensional space. In the light of these

  8. Recent technological developments in accelerating structures

    Yamazaki, Y.

    1992-01-01

    A variety of high-β accelerating structures for both proton and electron accelerators are reviewed from modern points of view. Both standing-and traveling-wave structures are discussed. Beam stability is one of the most important factors which must be taken into account regarding modern accelerators in which the beam intensity is an issue. (Author) 3 figs., 3 tabs., 60 refs

  9. Technology development in the field of tension between its intrinsic dynamics and the goals defined in the public discussion

    Joerges, B.; Bechmann, G.; Hohlfeld, R.

    1985-01-01

    Taking the three examples of nuclear energy, microelectronics and genetic engineering, an analytic perspective is proposed which goes beyond conventional technology assessment. A comparative approach to the analysis of these three consecutive developments is suggested focusing on their physical and social substitutional functions, relevant actor games and control mechanisms, and cultural assimilation. Finally, the issue of 'autonomy' or 'Eigendynamik' of modern science and technology is discussed. (orig.) [de

  10. Developing the learning physical science curriculum: Adapting a small enrollment, laboratory and discussion based physical science course for large enrollments

    Goldberg, Fred; Price, Edward; Robinson, Stephen; Boyd-Harlow, Danielle; McKean, Michael

    2012-06-01

    We report on the adaptation of the small enrollment, lab and discussion based physical science course, Physical Science and Everyday Thinking (PSET), for a large-enrollment, lecture-style setting. Like PSET, the new Learning Physical Science (LEPS) curriculum was designed around specific principles based on research on learning to meet the needs of nonscience students, especially prospective and practicing elementary and middle school teachers. We describe the structure of the two curricula and the adaptation process, including a detailed comparison of similar activities from the two curricula and a case study of a LEPS classroom implementation. In LEPS, short instructor-guided lessons replace lengthier small group activities, and movies, rather than hands-on investigations, provide the evidence used to support and test ideas. LEPS promotes student peer interaction as an important part of sense making via “clicker” questions, rather than small group and whole class discussions typical of PSET. Examples of student dialog indicate that this format is capable of generating substantive student discussion and successfully enacting the design principles. Field-test data show similar student content learning gains with the two curricula. Nevertheless, because of classroom constraints, some important practices of science that were an integral part of PSET were not included in LEPS.

  11. Developing the learning physical science curriculum: Adapting a small enrollment, laboratory and discussion based physical science course for large enrollments

    Fred Goldberg1

    2012-05-01

    Full Text Available We report on the adaptation of the small enrollment, lab and discussion based physical science course, Physical Science and Everyday Thinking (PSET, for a large-enrollment, lecture-style setting. Like PSET, the new Learning Physical Science (LEPS curriculum was designed around specific principles based on research on learning to meet the needs of nonscience students, especially prospective and practicing elementary and middle school teachers. We describe the structure of the two curricula and the adaptation process, including a detailed comparison of similar activities from the two curricula and a case study of a LEPS classroom implementation. In LEPS, short instructor-guided lessons replace lengthier small group activities, and movies, rather than hands-on investigations, provide the evidence used to support and test ideas. LEPS promotes student peer interaction as an important part of sense making via “clicker” questions, rather than small group and whole class discussions typical of PSET. Examples of student dialog indicate that this format is capable of generating substantive student discussion and successfully enacting the design principles. Field-test data show similar student content learning gains with the two curricula. Nevertheless, because of classroom constraints, some important practices of science that were an integral part of PSET were not included in LEPS.

  12. Examining pre-service science teachers' developing pedagogical design capacity for planning and supporting task-based classroom discussions

    Ross, Danielle Kristina

    Teachers face many challenges as we move forward into the age of the Next Generation Science Standards (NGSS) (Achieve, Inc., 2013). The NGSS aim to develop a population of scientifically literate and talented students who can participate in the "innovation-driven economy" (p. 1). In order to meet these goals, teachers must provide students with opportunities to engage in science and engineering practices (SEPs) and learn core ideas of these disciplines. This study followed pre-service secondary science teachers as they participated in a secondary science teacher preparation program intended to support the development of their pedagogical design capacity (Brown, 2009) related to planning and supporting whole-class taskbased discussions. Teacher educators in this program designed an intervention that aimed in supporting this development. This study examined a particular dimension of PDC -- specifically, PSTs effective use of resources to plan science lessons in which students engage in a high demand task, participate in SEPs, and discuss their work in a whole-class setting. In order to examine the effectiveness of the intervention, I had to define PDC a priori. I measured PDC by documenting how/whether PSTs engaged in the following instructional planning practices: developing Learning Goals, selecting and/or designing challenging tasks, anticipating student thinking, planning for monitoring student thinking, imagining the discussion storyline, planning questions, and planning marking strategies. Analyses showed a significant difference between baseline lesson plan scores and Instructional Performance scores. These findings suggest these patterns and changes were directly linked to the teacher preparation program. The mean increase in Instructional Performance scores during the course of the teacher preparation year further supports the effect of the teacher preparation coursework. Pre-service teachers with high pedagogical design capacity continually integrated the

  13. Structural development of child's artistic expression

    Sanja Filipović; Milica Vojvodić

    2017-01-01

    Abstract Structural development implies control and capability of the expression usage in terms of independent creative expression and making. Understanding of structural development of child's artistic expression as a phenomenon (which is suitable to child's age) has some implications on methodical acts considering artistic education of children and youngsters. Therefore, it is of unexceptional importance to know these laws as well as methodical acts which encourage the structural develop...

  14. Structured academic discussions through an online education-specific platform to improve Pharm.D. students learning outcomes.

    Kolluru, Srikanth; Varughese, James T

    To facilitate active academic discussions using an online, education-centered platform and reinforce concepts, in order to improve overall course outcomes. A third year integrated pharmacotherapy course was enrolled on an online searchable platform, Piazza®, to facilitate academic discussions. Students could ask, answer, and explore content, and build on submitted answers in wiki style in collaboration. Instructor posted learning objectives, endorsed student responses with correct answers and led follow-up discussions. Review sessions were conducted on this platform before all major exams. A student t-test was used to compare class performance with those of previous years. In a post-activity qualitative survey, most students appreciated the less stressful, online interaction with peers and faculty. For 15 medicinal chemistry course hours, there were 83 posts on Piazza® with 303 total contributions, 107 student responses, and 546min of group discussion time. 94% of questions received student responses and 89% of those were endorsed by the instructor. Students enjoyed pre-exam discussions, organization of the page, and reinforcing material on complex learning objectives. This discussion forum fostered personal exploration of content by the students, which led to better performance on examinations. Involving the use of an online, education-centered platform for student discussions was an effective means of increasing class engagement with the course material. Student performance on exams was significantly improved in both cohorts that utilized active learning compared to the cohort without active learning (p=0.001 and p= 0.002 respectively). Piazza® can be utilized for any course and across disciplines. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Optimum Criteria for Developing Defined Structures

    Ion IVAN

    2008-01-01

    Full Text Available Basic aspects concerning distributed applications are presented: definition, particularities and importance. For distributed applications linear, arborescent, graph structures are defined with different versions and aggregation methods. Distributed applications have associated structures which through their characteristics influence the costs of the stages in the development cycle and the exploitation costs transferred to each user. The complexity of the defined structures is analyzed. The minimum and maximum criteria are enumerated for optimizing distributed application structures.

  16. The primate fovea: Structure, function and development.

    Bringmann, Andreas; Syrbe, Steffen; Görner, Katja; Kacza, Johannes; Francke, Mike; Wiedemann, Peter; Reichenbach, Andreas

    2018-03-30

    A fovea is a pitted invagination in the inner retinal tissue (fovea interna) that overlies an area of photoreceptors specialized for high acuity vision (fovea externa). Although the shape of the vertebrate fovea varies considerably among the species, there are two basic types. The retina of many predatory fish, reptilians, and birds possess one (or two) convexiclivate fovea(s), while the retina of higher primates contains a concaviclivate fovea. By refraction of the incoming light, the convexiclivate fovea may function as image enlarger, focus indicator, and movement detector. By centrifugal displacement of the inner retinal layers, which increases the transparency of the central foveal tissue (the foveola), the primate fovea interna improves the quality of the image received by the central photoreceptors. In this review, we summarize ‒ with the focus on Müller cells of the human and macaque fovea ‒ data regarding the structure of the primate fovea, discuss various aspects of the optical function of the fovea, and propose a model of foveal development. The "Müller cell cone" of the foveola comprises specialized Müller cells which do not support neuronal activity but may serve optical and structural functions. In addition to the "Müller cell cone", structural stabilization of the foveal morphology may be provided by the 'z-shaped' Müller cells of the fovea walls, via exerting tractional forces onto Henle fibers. The spatial distribution of glial fibrillary acidic protein may suggest that the foveola and the Henle fiber layer are subjects to mechanical stress. During development, the foveal pit is proposed to be formed by a vertical contraction of the centralmost Müller cells. After widening of the foveal pit likely mediated by retracting astrocytes, Henle fibers are formed by horizontal contraction of Müller cell processes in the outer plexiform layer and the centripetal displacement of photoreceptors. A better understanding of the molecular, cellular

  17. Review and discussion of the development of synthetic aperture focusing technique for ultrasonic testing (SAFT-UT)

    Busse, L.J.; Collins, H.D.; Doctor, S.R.

    1984-03-01

    The development and capabilities of synthetic aperture focusing techniques for ultrasonic testing (SAFT-UT) are presented. The purpose of SAFT-UT is to produce high-resolution images of the interior of opaque objects. The goal of this work is to develop and implement methods which can be used to detect and to quantify the extent of defects and cracks in critical components of nuclear reactors (pressure vessels, primary piping systems, and nozzles). This report places particular emphasis upon the practical experimental results that have been obtained using SAFT-UT as well as the theoretical background that underlies synthetic aperture focusing. A discussion regarding high-speed and real-time implementations of two- and three-dimensional synthetic aperture focusing is also presented

  18. Structural reliability methods: Code development status

    Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

    1991-05-01

    The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

  19. [Development of clinical trial education program for pharmaceutical science students through small group discussion and role-playing using protocol].

    Imakyure, Osamu; Shuto, Hideki; Nishikawa, Fumi; Hagiwara, Yoshifuka; Inoue, Sachiko; Koyanagi, Taeko; Hirakawa, Masaaki; Kataoka, Yasufumi

    2010-08-01

    The acquirement of basic knowledge of clinical trials and professional attitude in their practices is a general instructional objective in the Model Core Curriculum for Pharmaceutical Education. Unfortunately, the previous program of clinical trial education was not effective in the acquirement of a professional attitude in their practices. Then, we developed the new clinical trial education program using protocol through small group discussion (SGD) and roll-playing. Our program consists of 7 steps of practical training. In step 1, the students find some problems after presentation of the protocol including case and prescription. In step 2, they analyse the extracted problems and share the information obtained in SGD. In steps 3 and 5, five clinical case scenarios are presented to the students and they discuss which case is suitable for entry to the clinical trial or which case corresponds to the discontinuance criteria in the present designed protocol. In steps 4 and 6, the roll-playing is performed by teachers and students as doctors and clinical research coordinators (CRC) respectively. Further, we conducted a trial practice based on this program for the students. In the student's self-evaluation into five grades, the average score of the skill acquisition level in each step was 3.8-4.7 grade. Our clinical trial education program could be effective in educating the candidates for CRC or clinical pharmacists.

  20. A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

    Abney, Morgan B.; Perry, Jay L.

    2016-01-01

    Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

  1. Theoretical development of atomic structure: Past, present and future

    Tiwary, S.N.

    1994-11-01

    Theoretical development of atomic structure is briefly discussed. The role of correlation, relativity, quantum electrodynamic (QED), finite nuclear size (FNS) and parity nonconservation (PNC) in high precision theoretical investigation of properties of atomic and ionic systems is demonstrated. At present, we do not have a comprehensive and practical atomic structure theory which accounts all these physical effects on an equal footing. Suggestions are made for future directions. (author). 108 refs, 5 figs, 9 tabs

  2. Development of the structural materials information center

    Oland, C.B.; Naus, D.J.

    1990-01-01

    The U.S. Nuclear Regulatory Commission has initiated a Structural Aging Program at the Oak Ridge National Laboratory to identify potential structural safety issues related to continued service of nuclear power plants and to establish criteria for evaluating and resolving these issues. One of the tasks in this program focuses on the establishment of a Structural Materials Information Center where data and information on the time variation of concrete and other structural material properties under the influence of pertinent environmental stressors and aging factors are being collected and assembled into a database. This database will be used to assist in the prediction of potential long-term deterioration of critical structural components in nuclear power plants and to establish limits on hostile environmental exposure for these structures and materials. Two complementary database formats have been developed. The Structural Materials Handbook is an expandable, hard copy handbook that contains complete sets of data and information for selected portland cement concrete, metallic reinforcement, prestressing tendon, and structural steel materials. The Structural Materials Electronic Database is accessible by an IBM-compatible personal computer and provides an efficient means for searching the various database files to locate materials with similar properties. The database formats have been developed to accommodate data and information on the time-variation of concrete and other structural material properties. To date, the database includes information on concrete, reinforcement, prestressing, and structural steel materials

  3. Distance Learning Plan Development: Initiating Organizational Structures

    Poole, Clifton

    1998-01-01

    .... Army distance learning plan managers to examine the DLPs they were directing. The analysis showed that neither army nor civilian distance learning plan managers used formalized requirements for organizational structure development (OSD...

  4. Long-term concepts for the energy supply of developing countries, with a detailed discussion of Brazil

    Koenig, C.

    1975-01-01

    The possibilities of meeting the energy requirements by nuclear energy are scrutinized after giving a survey about today's energy situation in Brazil and the beginnings of an eventual development until the year 2000. An analysis of energy-intensive industry branches and of the electro-energy economy shows a primary need of energy until the year 2000 which can substantially be met using nuclear energy. Especially the use of high-temperature reactors appears an optimal solution. The effects of HTR application on the structure of primary energy sources, on the pollution of the environment, and on the balance of foreign exchange payments are examined in detail. The nuclear power plants should be constructed in such a way that a number of additional products (fuel gases, reduction gases, synthesis gas, hydrocarbons) should be produced besides current generation by utilizing process heat. (UA) [de

  5. Survey and online discussion groups to develop a patient-rated outcome measure on acceptability of treatment response in vitiligo

    2014-01-01

    Background Vitiligo is a chronic depigmenting skin disorder which affects around 0.5-1% of the world’s population. The outcome measures used most commonly in trials to judge treatment success focus on repigmentation. Patient-reported outcome measures of treatment success are rarely used, although recommendations have been made for their inclusion in vitiligo trials. This study aimed to evaluate the face validity of a new patient-reported outcome measure of treatment response, for use in future trials and clinical practice. Method An online survey to gather initial views on what constitutes treatment success for people with vitiligo or their parents/carers, followed by online discussion groups with patients to reach consensus on what constitutes treatment success for individuals with vitiligo, and how this can be assessed in the context of trials. Participants were recruited from an existing database of vitiligo patients and through posts on the social network sites Facebook and Twitter. Results A total of 202 survey responses were received, of which 37 were excluded and 165 analysed. Three main themes emerged as important in assessing treatment response: a) the match between vitiligo and normal skin (how well it blends in); b) how noticeable the vitiligo is and c) a reduction in the size of the white patches. The majority of respondents said they would consider 80% or more repigmentation to be a worthwhile treatment response after 9 months of treatment. Three online discussion groups involving 12 participants led to consensus that treatment success is best measured by asking patients how noticeable their vitiligo is after treatment. This was judged to be best answered using a 5-point Likert scale, on which a score of 4 or 5 represents treatment success. Conclusions This study represents the first step in developing a patient reported measure of treatment success in vitiligo trials. Further work is now needed to assess its construct validity and responsiveness to

  6. Development in structural systems reliability theory

    Murotsu, Y.

    1986-01-01

    This paper is concerned with two topics on structural systems reliability theory. One covers automatic generation of failure mode equations, identifications of stochastically dominant failure modes, and reliability assessment of redundant structures. Reduced stiffness matrixes and equivalent nodal forces representing the failed elements are introduced for expressing the safety of the elements, using a matrix method. Dominant failure modes are systematically selected by a branch-and-bound technique and heuristic operations. The other discusses the various optimum design problems based on reliability concept. Those problems are interpreted through a solution to a multi-objective optimization problem. (orig.)

  7. Development in structural systems reliability theory

    Murotsu, Y

    1986-07-01

    This paper is concerned with two topics on structural systems reliability theory. One covers automatic generation of failure mode equations, identifications of stochastically dominant failure modes, and reliability assessment of redundant structures. Reduced stiffness matrixes and equivalent nodal forces representing the failed elements are introduced for expressing the safety of the elements, using a matrix method. Dominant failure modes are systematically selected by a branch-and-bound technique and heuristic operations. The other discusses the various optimum design problems based on reliability concept. Those problems are interpreted through a solution to a multi-objective optimization problem.

  8. Recent developments in low cost stable structures for space

    Thompson, T.C.; Grastataro, C.; Smith, B.G.

    1994-01-01

    The Los Alamos National Laboratory (LANL) in partnership with Composite Optics Incorporated (COI) is advancing the development of low cost, lightweight, composite technology for use in spacecraft and stable structures. The use of advanced composites is well developed, but the application of an all-composite tracker structure has never been achieved. This paper investigates the application of composite technology to the design and fabrication of an all-composite spacecraft bus for small satellites, using technology directly applicable to central tracking in a high luminosity environment. The satellite program Fast On-Orbit Recording of Transient Events (FORTE) is the second in a series of satellites to be launched into orbit for the US Department of Energy (DOE). This paper will discuss recent developments in the area of low cost composites, used for either spacecraft or ultra stable applications in high energy physics (HEP) detectors. The use of advanced composites is a relatively new development in the area of HEP. The Superconducting Super Collider (SSC) spawned a new generation of Trackers which made extensive use of graphite fiber reinforced plastic (GFRP) composite systems. LANL has designed a structure employing new fabrication technology. This concept will lower the cost of composite structures to a point that they may now compete with conventional materials. This paper will discuss the design, analysis and proposed fabrication of a small satellite structure. Central tracking structures using advanced materials capable of operating in an adverse environment typical of that found in a high luminosity collider could use identical concepts

  9. Exploring views on long term rehabilitation for people with stroke in a developing country: findings from focus group discussions

    2014-01-01

    Background The importance of long term rehabilitation for people with stroke is increasingly evident, yet it is not known whether such services can be materialised in countries with limited community resources. In this study, we explored the perception of rehabilitation professionals and people with stroke towards long term stroke rehabilitation services and potential approaches to enable provision of these services. Views from providers and users are important in ensuring whatever strategies developed for long term stroke rehabilitations are feasible and acceptable. Methods Focus group discussions were conducted involving 15 rehabilitation professionals and eight long term stroke survivors. All recorded conversations were transcribed verbatim and analysed using the principles of qualitative research. Results Both groups agreed that people with stroke may benefit from more rehabilitation compared to the amount of rehabilitation services presently provided. Views regarding the unavailability of long term rehabilitation services due to multi-factorial barriers were recognised. The groups also highlighted the urgent need for the establishment of community-based stroke rehabilitation centres. Family-assisted home therapy was viewed as a potential approach to continued rehabilitation for long term stroke survivors, given careful planning to overcome several family-related issues. Conclusions Barriers to the provision of long term stroke rehabilitation services are multi-factorial. Establishment of community-based stroke rehabilitation centres and training family members to conduct home-based therapy are two potential strategies to enable the continuation of rehabilitation for long term stroke survivors. PMID:24606911

  10. From Social Exclusion to Supported Inclusion: Adults with Intellectual Disability Discuss Their Lived Experiences of a Structured Social Group.

    Wilson, Nathan J; Jaques, Hayden; Johnson, Amanda; Brotherton, Michelle L

    2017-09-01

    People with intellectual disability often have few friends and experience social exclusion. Recognising this gap, supported social groups with the aim of inclusion and interdependence were created by a supported employment provider. Interviews were undertaken with 10 adults with intellectual disability exploring their lived experiences of a supported social group. Data were analysed using descriptive phenomenology. Two themes emerged (i) supported engagement fosters wellbeing, and (ii) developing social belonging and connectedness. Participants not only acknowledged the support that they needed to participate, but also that the social group had changed their lives in many ways. Adults with intellectual disability want to socialise, have friends and be part of their community. For this to be achieved, they recognise the need to seek some form of support. With appropriate and targeted support, adults with intellectual disability can move from social exclusion towards supported inclusion and experience richer lives. © 2016 The Authors Journal of Applied Research in Intellectual Disabilities Published by John Wiley & Sons Ltd.

  11. Structural development of child's artistic expression

    Sanja Filipović

    2017-03-01

    Full Text Available Structural development implies control and capability of the expression usage in terms of independent creative expression and making. Understanding of structural development of child's artistic expression as a phenomenon (which is suitable to child's age has some implications on methodical acts considering the artistic education of children and youngsters. Therefore, it is of unexceptional importance to know these laws as well as methodical acts which encourage the structural development of artistic capabilities from an early age. Various experts dealt with this phenomenon, particularly Bogomil Karlavaris. In his methodical research, he has given an unexceptional part to this problem. It has been a starting point for analysis of certain methodical questions which are included in this work.

  12. History of Planning Structure Development in Irkutsk

    Kulakov, A. I.; Ree, A. U.

    2017-11-01

    The development of Irkutsk was spontaneous; the first streets represented a rather complex system of streets, dead ends, lanes. Throughout the history of the city, several general plans and development projects have been implemented (but not completely). Unlike other large Siberian cities (Novosibirsk, Krasnoyarsk), Irkutsk managed to preserve its historical appearance, architecture and initial planning. During its history the city has passed five stages of the planning structure development. The first stage of the city’s history coincides with the formation of the Russian settlements network in Eastern Siberia from the middle of the 17th to the end of the 18th centuries. Like many other Siberian cities, Irkutsk began its evolution from a fortified stockaded town. By the end of the 17th century a trading quarter appeared outside its walls. Currently, the city is developing and growing, so, a relevant issue of the further development direction of the Irkutsk planning structure naturally arises.

  13. Development of Technology for Structural Integrity Evaluation

    Choun, Young Sun; Choi, I. K.; Kim, M. K. and others

    2005-03-01

    The purpose of this study is a development of seismic safety and structural integrity evaluation method of the structure in the Nuclear Power plant (NPP). The purpose of 1st sub-Topic is the development and improvement of the seismic safety evaluation methodology for the Nuclear Power Plant structures and safety related equipment. The purpose of 2nd sub-topic is the increasing of structure and equipment seismic capacity through the reducing of seismic force. The purpose of 3rd sub-topic is the development of 3-D nonlinear finite element analysis program for prestressed concrete containment building. The last purpose if the evaluation of the failure mechanism of containment structure and structure capacity and the assessment of integrity of containment through the of leakage test. As a result of this research, there are many research results were produced. The scenario earthquake developing method was developed and the effect of the structures and equipment was analyzed. The effectiveness of isolation system was determined and optimum isolation systems for each equipment were selected. The NUCAS-3D program for the 3 dimensional numerical analysis of containment building using the embedded tendon element and rebar element was developed. The tension behavior of containment building was examined and the leakage rate of the concrete crack was determined. The results of this research can be successfully used for many fields of integrity of NPP site. It can be used for development of design earthquake for the seismic design and safety evaluation and establishment of seismic safety evaluation program and seismic capacity improvement program for existing NPP. In case of seismic isolation part, it can be used for the application to the selection of optimum isolation devices for equipment isolation and to the effective evaluation of each seismic isolation devices. In containment analysis part, it can be used for ultimate pressure capacity evaluation of prestressed concrete

  14. Ecosocial System: Structure, Development Laws and Functioning

    E. I. Alekseev

    2004-01-01

    Full Text Available The paper substantiates necessity to develop a unified system of socio-ecological knowledge. Ecosophy being a forming component of dialectic-materialistic philosophy has been proposed as such system. Structure, development laws and functioning of eco-social system are considered as a part of ecosophy theory. Standard laws and ecological principles being widely recognized by ecologically orientated theorists are stated in the paper.

  15. Photogrammetry Methodology Development for Gossamer Spacecraft Structures

    Pappa, Richard S.; Jones, Thomas W.; Black, Jonathan T.; Walford, Alan; Robson, Stuart; Shortis, Mark R.

    2002-01-01

    Photogrammetry--the science of calculating 3D object coordinates from images--is a flexible and robust approach for measuring the static and dynamic characteristics of future ultra-lightweight and inflatable space structures (a.k.a., Gossamer structures), such as large membrane reflectors, solar sails, and thin-film solar arrays. Shape and dynamic measurements are required to validate new structural modeling techniques and corresponding analytical models for these unconventional systems. This paper summarizes experiences at NASA Langley Research Center over the past three years to develop or adapt photogrammetry methods for the specific problem of measuring Gossamer space structures. Turnkey industrial photogrammetry systems were not considered a cost-effective choice for this basic research effort because of their high purchase and maintenance costs. Instead, this research uses mainly off-the-shelf digital-camera and software technologies that are affordable to most organizations and provide acceptable accuracy.

  16. Mechanical Model Development for Composite Structural Supercapacitors

    Ricks, Trenton M.; Lacy, Thomas E., Jr.; Santiago, Diana; Bednarcyk, Brett A.

    2016-01-01

    Novel composite structural supercapacitor concepts have recently been developed as a means both to store electrical charge and to provide modest mechanical load carrying capability. Double-layer composite supercapacitors are often fabricated by impregnating a woven carbon fiber fabric, which serves as the electrodes, with a structural polymer electrolyte. Polypropylene or a glass fabric is often used as the separator material. Recent research has been primarily limited to evaluating these composites experimentally. In this study, mechanical models based on the Multiscale Generalized Method of Cells (MSGMC) were developed and used to calculate the shear and tensile properties and response of two composite structural supercapacitors from the literature. The modeling approach was first validated against traditional composite laminate data. MSGMC models for composite supercapacitors were developed, and accurate elastic shear/tensile properties were obtained. It is envisioned that further development of the models presented in this work will facilitate the design of composite components for aerospace and automotive applications and can be used to screen candidate constituent materials for inclusion in future composite structural supercapacitor concepts.

  17. Development and optimization of containment structure concepts

    Reuter, H.R.; Whitcraft, J.S. Jr.

    1976-01-01

    The development of prestressed concrete containment structures for nuclear power plants designed, constructed, and tested by Bechtel Power Corporation has been divided into three general stages or generations. The distinctions that characterize these generations are: the shape of the dome, the number of buttresses, the size and arrangement of the post-tensioning tendons, and the design level of the prestressing forces. (author)

  18. Development of the Structural Materials Information Center

    Oland, C.B.; Naus, D.J.

    1990-01-01

    The US Nuclear Regulatory Commission has initiated a Structural Aging Program at the Oak Ridge National Laboratory to identify potential structural safety issues related to continued service of nuclear power plants and to establish criteria for evaluating and resolving these issues. One of the tasks in this program focuses on the establishment of a Structural Materials Information Center where data and information on the time variation of concrete and other structural material properties under the influence of pertinent environmental stressors and aging factors are being collected and assembled into a data base. This data base will be used to assist in the prediction of potential long-term deterioration of critical structural components in nuclear power plants and to establish limits on hostile environmental exposure for these structures and materials. Two complementary data base formats have been developed. The Structural Materials Handbook is an expandable, hard-copy reference document that contains complete sets of data and information for selected portland cement concrete, metallic reinforcement, prestressing tendon, and structural steel materials. Baseline data, reference properties and environmental information are presented in the handbook as tables, notes and graphs. The handbook, which will be published in four volumes, serves as the information source for the electronic data base. The Structural Materials Electronic Data Base is accessible by an IBM-compatible personal computer and provides an efficient means for searching the various data base files to locate materials with similar properties. Properties will be reported in the International System of Units (SI) and in customary units whenever possible. 7 refs., 3 figs., 4 tabs

  19. Development of Textile Reinforced Composites for Aircraft Structures

    Dexter, H. Benson

    1998-01-01

    NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

  20. Development of thermoplastic composite aircraft structures

    Renieri, Michael P.; Burpo, Steven J.; Roundy, Lance M.; Todd, Stephanie A.; Kim, H. J.

    1992-01-01

    Efforts focused on the use of thermoplastic composite materials in the development of structural details associated with an advanced fighter fuselage section with applicability to transport design. In support of these designs, mechanics developments were conducted in two areas. First, a dissipative strain energy approach to material characterization and failure prediction, developed at the Naval Research Laboratory, was evaluated as a design/analysis tool. Second, a finite element formulation for thick composites was developed and incorporated into a lug analysis method which incorporates pin bending effects. Manufacturing concepts were developed for an upper fuel cell cover. A detailed trade study produced two promising concepts: fiber placement and single-step diaphragm forming. Based on the innovative design/manufacturing concepts for the fuselage section primary structure, elements were designed, fabricated, and structurally tested. These elements focused on key issues such as thick composite lugs and low cost forming of fastenerless, stiffener/moldine concepts. Manufacturing techniques included autoclave consolidation, single diaphragm consolidation (SDCC) and roll-forming.

  1. European structural materials development for fusion applications

    Schaaf, B. van der E-mail: vanderschaaf@nrg-nl.com; Ehrlich, K.; Fenici, P.; Tavassoli, A.A.; Victoria, M

    2000-09-01

    Leading long term considerations for choices in the European Long Term Technology programme are the high temperature mechanical- and compatibility properties of structural materials under neutron irradiation. The degrees of fabrication process freedom are closely investigated to allow the construction of complex shapes. Another important consideration is the activation behaviour of the structural material. The ideal solution is the recycling of the structural materials after a relatively short 'cooling' period. The structural materials development in Europe has three streams. The first serves the design and construction of ITER and is closely connected to the choice made: water cooled austenitic stainless steel. The second development stream is to support the design and construction of DEMO relevant blanket modules to be tested in ITER. The helium cooled pebble bed and the water cooled liquid lithium concept rely both on RAFM steel. The goal of the third stream is to investigate the potential of advanced materials for fusion power reactors beyond DEMO. The major contending materials: SiCSiC composites, vanadium, titanium and chromium alloys hold the promise of high operating temperatures, but RAFM has also a high temperature potential applying oxide dispersion strengthening. The development of materials for fusion power application requires a high flux 14 MeV neutron source to simulate the fusion power environment.

  2. Nursing Competency: Definition, Structure and Development

    Fukada, Mika

    2018-01-01

    Nursing competency includes core abilities that are required for fulfilling one’s role as a nurse. Therefore, it is important to clearly define nursing competency to establish a foundation for nursing education curriculum. However, while the concepts surrounding nursing competency are important for improving nursing quality, they are still not yet completely developed. Thus, challenges remain in establishing definitions and structures for nursing competency, competency levels necessary for nursing professionals, training methods and so on. In the present study, we reviewed the research on definitions and attributes of nursing competency in Japan as well as competency structure, its elements and evaluation. Furthermore, we investigated training methods to teach nursing competency. PMID:29599616

  3. Nursing Competency: Definition, Structure and Development.

    Fukada, Mika

    2018-03-01

    Nursing competency includes core abilities that are required for fulfilling one's role as a nurse. Therefore, it is important to clearly define nursing competency to establish a foundation for nursing education curriculum. However, while the concepts surrounding nursing competency are important for improving nursing quality, they are still not yet completely developed. Thus, challenges remain in establishing definitions and structures for nursing competency, competency levels necessary for nursing professionals, training methods and so on. In the present study, we reviewed the research on definitions and attributes of nursing competency in Japan as well as competency structure, its elements and evaluation. Furthermore, we investigated training methods to teach nursing competency.

  4. Community-based Ontology Development, Annotation and Discussion with MediaWiki extension Ontokiwi and Ontokiwi-based Ontobedia

    Ong, Edison; He, Yongqun

    2016-01-01

    Hundreds of biological and biomedical ontologies have been developed to support data standardization, integration and analysis. Although ontologies are typically developed for community usage, community efforts in ontology development are limited. To support ontology visualization, distribution, and community-based annotation and development, we have developed Ontokiwi, an ontology extension to the MediaWiki software. Ontokiwi displays hierarchical classes and ontological axioms. Ontology classes and axioms can be edited and added using Ontokiwi form or MediaWiki source editor. Ontokiwi also inherits MediaWiki features such as Wikitext editing and version control. Based on the Ontokiwi/MediaWiki software package, we have developed Ontobedia, which targets to support community-based development and annotations of biological and biomedical ontologies. As demonstrations, we have loaded the Ontology of Adverse Events (OAE) and the Cell Line Ontology (CLO) into Ontobedia. Our studies showed that Ontobedia was able to achieve expected Ontokiwi features. PMID:27570653

  5. Development of structural steels for nuclear application

    Hong, Jun Hwa; Chi, S. H.; Ryu, W. S.; Lee, B. S.; Kim, D. H.; Kim, J. H.; Oh, Y. J.; Byun, T. S.; Yoon, J. H.; Park, D. K.; Oh, J. M.; Cho, H. D.; Kim, H.; Kim, H. D.; Kang, S. S.; Kim, J. W.; Ahn, S. B.

    1997-08-01

    To established the bases of nuclear structural material technologies, this study was focused on the localization and improvement of nuclear structural steels, the production of material property data, and technology developments for integrity evaluation. The important test and analysis technologies for material integrity assessment were developed, and the materials properties of the pressure vessel steels were evaluated systematically on the basis of those technologies, they are microstructural characteristics, tensile and indentation deformation properties, impact properties, and static and dynamic fracture toughness, fatigue and corrosion fatigue etc. Irradiation tests in the research reactors were prepared or completed to obtain the mechanical properties of irradiated materials. The improvement of low alloy steel was also attempted through the comparative study on the manufacturing processes, computer assisted alloy and process design, and application of the inter critical heat treatment. On the other hand, type 304 stainless steels for reactor internals were developed and tested successfully. High strength type 316LN stainless steels for reactor internals were developed and the microstructural characteristics, corrosion resistance, mechanical properties at high temperatures, low cycle fatigue property etc. were tested and analyzed in the view point of the effect of nitrogen. Type 347 stainless steels with high corrosion resistance and toughness for pipings and tubes and low-activated Cr-Mn steels were also developed and their basic properties were evaluated. Finally, the martensitic stainless steels for turbine blade were developed and tests. (author). 242 refs., 100 tabs., 304 figs.

  6. Development of structural steels for nuclear application

    Hong, Jun Hwa; Chi, S. H.; Ryu, W. S.; Lee, B. S.; Kim, D. H.; Kim, J. H.; Oh, Y. J.; Byun, T. S.; Yoon, J. H.; Park, D. K.; Oh, J. M.; Cho, H. D.; Kim, H.; Kim, H. D.; Kang, S. S.; Kim, J. W.; Ahn, S. B.

    1997-08-01

    To established the bases of nuclear structural material technologies, this study was focused on the localization and improvement of nuclear structural steels, the production of material property data, and technology developments for integrity evaluation. The important test and analysis technologies for material integrity assessment were developed, and the materials properties of the pressure vessel steels were evaluated systematically on the basis of those technologies, they are microstructural characteristics, tensile and indentation deformation properties, impact properties, and static and dynamic fracture toughness, fatigue and corrosion fatigue etc. Irradiation tests in the research reactors were prepared or completed to obtain the mechanical properties of irradiated materials. The improvement of low alloy steel was also attempted through the comparative study on the manufacturing processes, computer assisted alloy and process design, and application of the inter critical heat treatment. On the other hand, type 304 stainless steels for reactor internals were developed and tested successfully. High strength type 316LN stainless steels for reactor internals were developed and the microstructural characteristics, corrosion resistance, mechanical properties at high temperatures, low cycle fatigue property etc. were tested and analyzed in the view point of the effect of nitrogen. Type 347 stainless steels with high corrosion resistance and toughness for pipings and tubes and low-activated Cr-Mn steels were also developed and their basic properties were evaluated. Finally, the martensitic stainless steels for turbine blade were developed and tests. (author). 242 refs., 100 tabs., 304 figs

  7. Regularities development of entrepreneurial structures in regions

    Julia Semenovna Pinkovetskaya

    2012-12-01

    Full Text Available Consider regularities and tendencies for the three types of entrepreneurial structures — small enterprises, medium enterprises and individual entrepreneurs. The aim of the research was to confirm the possibilities of describing indicators of aggregate entrepreneurial structures with the use of normal law distribution functions. Presented proposed by the author the methodological approach and results of construction of the functions of the density distribution for the main indicators for the various objects: the Russian Federation, regions, as well as aggregates ofentrepreneurial structures, specialized in certain forms ofeconomic activity. All the developed functions, as shown by the logical and statistical analysis, are of high quality and well-approximate the original data. In general, the proposed methodological approach is versatile and can be used in further studies of aggregates of entrepreneurial structures. The received results can be applied in solving a wide range of problems justify the need for personnel and financial resources at the federal, regional and municipal levels, as well as the formation of plans and forecasts of development entrepreneurship and improvement of this sector of the economy.

  8. Structured illumination microscopy and its new developments

    Jianling Chen

    2016-05-01

    Full Text Available Optical microscopy allows us to observe the biological structures and processes within living cells. However, the spatial resolution of the optical microscopy is limited to about half of the wavelength by the light diffraction. Structured illumination microscopy (SIM, a type of new emerging super-resolution microscopy, doubles the spatial resolution by illuminating the specimen with a patterned light, and the sample and light source requirements of SIM are not as strict as the other super-resolution microscopy. In addition, SIM is easier to combine with the other imaging techniques to improve their imaging resolution, leading to the developments of diverse types of SIM. SIM has great potential to meet the various requirements of living cells imaging. Here, we review the recent developments of SIM and its combination with other imaging techniques.

  9. Financial Structure and Economic Development in Nigieria

    Ph. D. Olusegun Olowe

    2012-05-01

    Full Text Available In this study , the measurement of the Nigerian financial interrelation ratio was considered in line with the structure and development of financial system between 1999 and 2008 with a view to examining the incidences of the financial liberalization . The financial intermediation role for Nigeria on current basic prices was computed to determining the extent of stability and /or positive cum negative changes. This is to ensure the involvement of government as well as thedegree of financial institutions’ involvement in the economic growth and development of the country. In essence, the results of this study will be of relevance to formulate and execute policy formulation in its entirety. The result of the study revealed a pure neglect in the country with emphasis on financial intermediation. The earlier we put an enhanced financial structure in place, , the better for the economy.

  10. Nursing Competency: Definition, Structure and Development

    Fukada, Mika

    2018-01-01

    Nursing competency includes core abilities that are required for fulfilling one’s role as a nurse. Therefore, it is important to learly define nursing competency to establish a foundation for nursing education curriculum. However, while the concepts surrounding nursing competency are important for improving nursing quality, they are still not yet completely developed. Thus, challenges remain in establishing finitions and structures for nursing competency, competency levels necessary for nurs...

  11. Scientific methods for developing ultrastable structures

    Gamble, M.; Thompson, T.; Miller, W.

    1990-01-01

    Scientific methods used by the Los Alamos National Laboratory for developing an ultrastable structure for study of silicon-based elementary particle tracking systems are addressed. In particular, the design, analysis, and monitoring of this system are explored. The development methodology was based on a triad of analytical, computational, and experimental techniques. These were used to achieve a significant degree of mechanical stability (alignment accuracy >1 μrad) and yet allow dynamic manipulation of the system. Estimates of system thermal and vibratory stability and component performance are compared with experimental data collected using laser interferometry and accelerometers. 8 refs., 5 figs., 4 tabs

  12. The human brain. Prenatal development and structure

    Marin-Padilla, Miguel

    2011-01-01

    This book is unique among the current literature in that it systematically documents the prenatal structural development of the human brain. It is based on lifelong study using essentially a single staining procedure, the classic rapid Golgi procedure, which ensures an unusual and desirable uniformity in the observations. The book is amply illustrated with 81 large, high-quality color photomicrographs never previously reproduced. These photomicrographs, obtained at 6, 7, 11, 15, 18, 20, 25, 30, 35, and 40 weeks of gestation, offer a fascinating insight into the sequential prenatal development of neurons, blood vessels, and glia in the human brain. (orig.)

  13. The human brain. Prenatal development and structure

    Marin-Padilla, Miguel

    2011-07-01

    This book is unique among the current literature in that it systematically documents the prenatal structural development of the human brain. It is based on lifelong study using essentially a single staining procedure, the classic rapid Golgi procedure, which ensures an unusual and desirable uniformity in the observations. The book is amply illustrated with 81 large, high-quality color photomicrographs never previously reproduced. These photomicrographs, obtained at 6, 7, 11, 15, 18, 20, 25, 30, 35, and 40 weeks of gestation, offer a fascinating insight into the sequential prenatal development of neurons, blood vessels, and glia in the human brain. (orig.)

  14. Ethics in science education: responsabilities and commitments with the child's moral development in the discussion of controversial subjects

    Júlio César Castilho Razera

    2006-03-01

    Full Text Available A review of recent research outcomes presents in a sample of Science Education journals, shows that ethics and moral development issues have been neglected in the Science Education research. Based in theoretical referential directed toward this theme, and in a research carried out on controversial issues in the Science Teaching, such as those related to the debate creationism versus evolutionism, this paper tries to show the necessity and possibilities to take into consideration questions of this nature in classroom, in order to help developing the moral in students.

  15. Does Household Food Security Affect Cognitive and Social Development of Kindergartners? Discussion Paper No. 1276-03

    Stormer, Ame; Harrison, Gail G.

    2003-01-01

    The development in the last decade of methodology for measuring and scaling household food insecurity and hunger in U.S. populations makes possible systematic examination of the ways in which hunger and food insecurity affect individuals and families. The impact on children has always been of primary concern for policy, advocacy, and science…

  16. Developing Marine Science Instructional Materials Using Integrated Scientist-Educator Collaborative Design Teams: A Discussion of Challenges and Success Developing Real Time Data Projects for the COOL Classroom

    McDonnell, J.; Duncan, R. G.; Glenn, S.

    2007-12-01

    , in which students use real-time-data (RTD) to generate explanations about important ocean phenomena. We will discuss our use of an Instructional Design Model (Gauge 1987) to: 1) assess our audience need, 2) develop an effective collaborative design team, 3) develop and evaluate the instructional product, and 4) implement professional development designed to familiarize teachers with oceans sciences as a context for scientific inquiry.

  17. Development of an active structure flight experiment

    Manning, R. A.; Wyse, R. E.; Schubert, S. R.

    1993-02-01

    The design and development of the Air Force and TRW's Advanced Control Technology Experiment (ACTEX) flight experiment is described in this paper. The overall objective of ACTEX is to provide an active structure trailblazer which will demonstrate the compatibility of active structures with operational spacecraft performance and lifetime measures. At the heart of the experiment is an active tripod driven by a digitally-programmable analog control electronics subsystem. Piezoceramic sensors and actuators embedded in a graphite epoxy host material provide the sensing and actuation mechanism for the active tripod. Low noise ground-programmable electronics provide a virtually unlimited number of control schemes that can be implemented in the space environment. The flight experiment program provides the opportunity to gather performance, reliability, adaptability, and lifetime performance data on vibration suppression hardware for the next generation of DoD and NASA spacecraft.

  18. Women's Ideas about the Health Effects of Household Air Pollution, Developed through Focus Group Discussions and Artwork in Southern Nepal.

    Devakumar, Delan; Qureshi, Zeshan; Mannell, Jenevieve; Baruwal, Manju; Sharma, Neha; Rehfuess, Eva; Saville, Naomi M; Manandhar, Dharma S; Osrin, David

    2018-02-01

    Household air pollution is a major cause of ill health, but few solutions have been effective to date. While many quantitative studies have been conducted, few have explored the lived experiences and perceptions of women who do the cooking, and as a result are those most exposed to household air pollution. In this study, we worked with groups of home cooks, and sought to use art as a means of engaging them in discussions of how household air pollution from cooking affects their lives. In the Terai district of southern Nepal, we held four focus groups that included 26 local women from urban and peri-urban areas, as well as six local artists. The women then met approximately weekly over four months, and produced images related to air pollution. Transcripts from the focus groups were reviewed independently by two authors, who initially categorised data deductively to pre-defined nodes, and subsequently inductively reviewed emergent themes. Women identified a number of health effects from air pollution. The main physical effects related to the eye and the respiratory system, and women and young children were seen as most vulnerable. The psychosocial effects of air pollution included reduced food intake by women and lethargy. Suggested solutions included modifications to the cooking process, changing the location of stoves, and increasing ventilation. The main barriers were financial. The lived experiences of women in southern Nepal around the problem of air pollution offers a more nuanced and context-specific understanding of the perceptions and challenges of addressing air pollution, which can be used to inform future interventions.

  19. Discussion on Optimization of Capital Structure of Enterprises%对企业资本结构优化的探讨

    姚泓江

    2011-01-01

    资本结构是现代企业财务理论研究的核心内容之一.但是企业的实际资本结构复杂多变,理论分析存在一定的抽象性.20世纪50年代以前的资本结构理论被美国财务学者归纳为“早期资本结构理论”,50年代以后以MM理论为代表的资本结构理论则被称为“现代资本结构理论”.资本结构理论分析是以股东财富最大化为公司目标假设,以资本成本分析为基础.其中早期资本结构理论包括净利理论、营业净利理论、传统折衷理论、MM理论和权衡理论.本文主要是探讨当今企业的资本结构受哪些因素影响,确立合理的资本结构需要哪些措施.%The capital structure is one of core contents of studying modern corporate finance theory. However, the actual capital structure of enterprises is complex, and theoretical analysis exists in abstract. Capital structure theory was summarized as "early capital structure theory" by U.S. Financial scholars before the 1950s, and the capital structure theory which was represented by MM theory was called the "modern capital structure theory" after 1950s. Capital structure theory analysis takes maximizing shareholder wealth as the company's goals hypothesis, is based on an analysis of capital costs. Early theory of capital structure includes net income, operating income theory, the traditional eclectic theory, MM theory and the trade-off theory. This paper mainly focuses on discussing factors influencing the capital structure of enterprises, and measures should adopt to establish reasonable capital structure.

  20. [Results of a structurized discussion within the framework of abortion with particular reference to problems of pregnancy, conflict and related topics (author's transl)].

    Woynar, W; Schuster, E; Oberheuser, F

    1980-02-01

    Structured discussions within the framework of social counseling were held with 112 patients in connection with abortion. They were structured according to sociopsychologoical criteria in order to discover any hidden conflicts prevailing in those patients seeking abortion. It became clear that there was a discrepancy between the individual expectation and its translation into reality. Also there was a situation in which too much was demanded of the patient, resulting in an inability to cope with the factors governing her life with subsequent fear of mental and social isolation. Sociologically speaking, the group was divided between elderly socially secured patients who already had children and young patients still undergoing educational or vocational training. (Authors' modified)

  1. Non-isothermal effects on SO2 absorption by water droplets. I - Model development. II - Results and discussion

    Reda, M.; Carmichael, G. R.

    1982-01-01

    An analytic model of SO2 absorption in a falling water droplet is developed and a simulation of SO2 washout is performed. Nonisothermic effects on drop growth, droplet physical parameters, reaction rates, and multicomponent diffusion are treated in the model. The gas-liquid interface is assumed to be at equilibrium, and interfacial resistance is negligible. Raindrops are simulated as falling from a 2 km height through an atmospheric region containing SO2. The droplets decrease in size from evaporation and cooling, and their slightly basic pH aids SO2 absorption. The simulation indicates higher SO2 absorption at higher altitudes, and desorption may occur at ground level. Isothermal effects are concluded to be significant, and quantification of effects will depend on further modelling.

  2. Puberty and structural brain development in humans.

    Herting, Megan M; Sowell, Elizabeth R

    2017-01-01

    Adolescence is a transitional period of physical and behavioral development between childhood and adulthood. Puberty is a distinct period of sexual maturation that occurs during adolescence. Since the advent of magnetic resonance imaging (MRI), human studies have largely examined neurodevelopment in the context of age. A breadth of animal findings suggest that sex hormones continue to influence the brain beyond the prenatal period, with both organizational and activational effects occurring during puberty. Given the animal evidence, human MRI research has also set out to determine how puberty may influence otherwise known patterns of age-related neurodevelopment. Here we review structural-based MRI studies and show that pubertal maturation is a key variable to consider in elucidating sex- and individual- based differences in patterns of human brain development. We also highlight the continuing challenges faced, as well as future considerations, for this vital avenue of research. Copyright © 2016. Published by Elsevier Inc.

  3. Encouraging Classroom Discussion

    Robert Joseph McKee

    2014-10-01

    Full Text Available Classroom discussion has the potential to enhance the learning environment and encourages students to become active participants in the educational process. Student participation in classroom discussion has been shown to significantly improve the student learning experience. Research suggests that classroom discussion is an effective method for encouraging student classroom participation and for motivating student learning beyond the classroom. Participation in classroom discussion encourages students to become active collaborators in the learning process, while at the same time providing instructors with a practical method of assessing student learning. Classroom discussion is an effective tool for developing higher-level cognitive skills like critical thinking. Despite the potential discussion holds for student learning, many in academia lament the lack of participation in the classroom. The lack of student participation in classroom discussion is not a recent problem; it is one that has frustrated instructors for decades. Instructors report that some of the more current methods for encouraging classroom discussion can be exasperating and at times non-productive. This two-year study of 510 college and university students provides insight into the reasons why some students do not participate in classroom discussion. This study, which also elicited input from sixteen college and university professors and two high school teachers, offers some suggestions for creating and encouraging an environment conducive to student participation in the classroom.

  4. [Discussion on research and development of new traditional Chinese medicine preparation process based on idea of QbD].

    Feng, Yi; Hong, Yan-Long; Xian, Jie-Chen; Du, Ruo-Fei; Zhao, Li-Jie; Shen, Lan

    2014-09-01

    Traditional processes are mostly adopted in traditional Chinese medicine (TCM) preparation production and the quality of products is mostly controlled by terminal. Potential problems of the production in the process are unpredictable and is relied on experience in most cases. Therefore, it is hard to find the key points affecting the preparation process and quality control. A pattern of research and development of traditional Chinese medicine preparation process based on the idea of Quality by Design (QbD) was proposed after introducing the latest research achievement. Basic theories of micromeritics and rheology were used to characterize the physical property of TCM raw material. TCM preparation process was designed in a more scientific and rational way by studying the correlation among enhancing physical property of raw material, preparation process and product quality of preparation. So factors affecting the quality of TCM production would be found out and problems that might occur in the pilot process could be predicted. It would be a foundation for the R&D and production of TCM preparation as well as support for the "process control" of TCMIs gradually realized in the future.

  5. An Analysis of U.S. Foreign Direct Investment Policy and Economic Development. A.I.D. Discussion Paper No. 36.

    Bergsten, C. Fred; De Castro, Bruce

    The purpose of the paper is to analyze U.S. policies toward financial investment in developing nations. The paper is presented in two sections. In section I, the controversial effects of direct foreign investment on development are discussed. Case studies of investment policies toward India, the Philippines, Ghana, Guatemala, and Argentina are…

  6. Session 1 - discussion

    Wells, C.; Richards, K.M.; McKerrow, J.F.

    1991-01-01

    This discussion session of the Landfill Gas-Energy and Environment 90 Conference covered the landfill gas potential, the setting up of the Non-Fossil Fuel Obligation; anticipated developments in the post 1998 period, the problem of smell for those who live near a landfill, and the length of time a landfill site is productive in terms of gas evolution. Relevant regulations in California are briefly discussed. (author)

  7. Discussion paper 'Natural Gas for Sale'

    1995-04-01

    The information in this report must support a discussion on policy starting points for the structure of natural gas tariffs in the Netherlands. The discussion will be held within EnergieNed (the association for energy distribution companies in the Netherlands) in the light of recent developments in the energy distribution sector in Europe

  8. Design of an X-band accelerating structure using a newly developed structural optimization procedure

    Huang, Xiaoxia [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Fang, Wencheng; Gu, Qiang [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhao, Zhentang, E-mail: zhaozhentang@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

    2017-05-11

    An X-band high gradient accelerating structure is a challenging technology for implementation in advanced electron linear accelerator facilities. The present work discusses the design of an X-band accelerating structure for dedicated application to a compact hard X-ray free electron laser facility at the Shanghai Institute of Applied Physics, and numerous design optimizations are conducted with consideration for radio frequency (RF) breakdown, RF efficiency, short-range wakefields, and dipole/quadrupole field modes, to ensure good beam quality and a high accelerating gradient. The designed X-band accelerating structure is a constant gradient structure with a 4π/5 operating mode and input and output dual-feed couplers in a racetrack shape. The design process employs a newly developed effective optimization procedure for optimization of the X-band accelerating structure. In addition, the specific design of couplers providing high beam quality by eliminating dipole field components and reducing quadrupole field components is discussed in detail.

  9. Structural Connectivity of the Developing Human Amygdala

    Saygin, Zeynep M.; Osher, David E.; Koldewyn, Kami; Martin, Rebecca E.; Finn, Amy; Saxe, Rebecca; Gabrieli, John D.E.; Sheridan, Margaret

    2015-01-01

    A large corpus of research suggests that there are changes in the manner and degree to which the amygdala supports cognitive and emotional function across development. One possible basis for these developmental differences could be the maturation of amygdalar connections with the rest of the brain. Recent functional connectivity studies support this conclusion, but the structural connectivity of the developing amygdala and its different nuclei remains largely unstudied. We examined age related changes in the DWI connectivity fingerprints of the amygdala to the rest of the brain in 166 individuals of ages 5-30. We also developed a model to predict age based on individual-subject amygdala connectivity, and identified the connections that were most predictive of age. Finally, we segmented the amygdala into its four main nucleus groups, and examined the developmental changes in connectivity for each nucleus. We observed that with age, amygdalar connectivity becomes increasingly sparse and localized. Age related changes were largely localized to the subregions of the amygdala that are implicated in social inference and contextual memory (the basal and lateral nuclei). The central nucleus’ connectivity also showed differences with age but these differences affected fewer target regions than the basal and lateral nuclei. The medial nucleus did not exhibit any age related changes. These findings demonstrate increasing specificity in the connectivity patterns of amygdalar nuclei across age. PMID:25875758

  10. Complexidade & desenvolvimento: abordagem metodológica e panorama da discussão propagada pelo Ipea entre 2008 e 2010 Complexity and development: methodological and panoramic approaches to the discussion on the Ipea between 2008 and 2010

    José Celso Cardoso Jr.

    2012-12-01

    Full Text Available O declínio das versões mais ortodoxas do liberalismo na primeira década do século XXI ofereceu oportunidade para a revalorização da atuação estatal. No Brasil, a recuperação da capacidade de investimento do Estado e a atualização - ainda que insuficientes - de sua estrutura administrativa revitalizaram os campos do planejamento e desenvolvimento, outorgando-lhes novos e mais complexos e desafiadores objetivos. Como repensar, portanto, o binômio "planejamento-desenvolvimento" nesse novo contexto? O ensaio explora aspectos da complexificação do tempo presente, o que, por sua vez, suscita a necessidade de requalificar e ressignificar os sentidos e as práticas do planejamento governamental e do próprio desenvolvimento pretendido ao país na atual quadra histórica. Conclui se afirmando que o desenvolvimento é processo coletivo, contínuo e cumulativo de aprendizado e conquistas, cujas dimensões ou qualificativos agregam-se - teórica e politicamente - tanto em simultâneo como em patamares equivalentes de importância estratégica, pois hoje, afinal, sabe-se que ou é assim ou não se está falando de desenvolvimento.The decline of more orthodox versions of liberalism in the first decade of this century has provided an opportunity for the reevaluation of state action. In Brazil, the recovery of the state's investment capacity and the updates (albeit inadequate updates to the state's administrative structure have revitalized the fields of planning and development, giving them new, challenging, and more complex goals. But to what extent should the concept of "planning and development" be reconsidered in this new context? The paper explores aspects of the complexity of current events, which themselves raise the need to retrain and reframe meanings and practices of government planning, as well as of the very development that has been planned for the country during this period. We conclude by stating that development is a collective

  11. Development of all-beryllium riveted structures

    Floyd, D.R.; Leslie, W.W.; Miley, D.V.; Nokes, R.W.

    1976-01-01

    Results are presented of a development program aimed at making a full-scale, all-beryllium frustrum by riveted assembly methods. Included are descriptions of the sheet-metal fabrication practices and assembly plans. Results of extensive mechanical testing of both ingot- and powder-source beryllium products that are presented include tensile, notch-tensile, bearing, and shear tests. Although the full-size structure has not been built, examples are given of several conical and cylindrical structures that were made. The largest of these is a 20-in. diameter, 15-in. long cylinder that was roll-formed from one 0.050-in. thick ingot sheet and assembled with 60 countersunk rivets. Tensile testing of riveted flat coupons is also reported as is bulge testing of riveted cylindrical shells. A cost comparison of riveted deep-drawn and powder-source cylinders is made. Results show that when strength and dimensional tolerance requirements are not severe, a riveted assembly approach is warranted. 33 figures, 8 tables

  12. Development of inter digital transducers to the control structures

    Takpara, R.; Fall, D.; Duquennoy, M.; Ouaftouh, M.; Courtois, C.; Rguiti, M.; Gonon, M.; Maurye, N.; Martic, G.; Lardot, V.; Seronveaux, L.; Halleux, J.; Pelegris, C.; Guessasma, M.

    2015-01-01

    This work deals with the realization of interdigital transducers (IDT) in order to characterize the quality of coatings and surfaces of structures. The challenge of this study is three fold. Firstly, the aim is to have efficient sensors to generate surface acoustic wave (SAW) since these wave sare well suited for this type of characterization. The second objective ofthis study is to provide flexible sensors so that they can adapt to different shapes of structures. Finally, relatively inexpensive technologies are favored for the development of these sensors because this allows continuous monitoring (structural health monitoring) by incorporating these sensors permanently on the structures to be tested. To meet these goals, several French and Belgian laboratories have gathered around the PRISTIFLEX project INTERREG IV. After a presentation of the manufacturing process and the characteristics of the piezo electric material developed in this study, we discussed modeling which helped to define the dimensional parameters of the piezo electric plate that composes the sensor. Then, the techniques for producing the electrodes (laserablation and inkjet printing) were presented and an example of performed electrode was provided. Finally, the effectiveness of these sensors from the measurement of the displacement caused by the surface wave excited by these IDT sensors were demonstrated. (author)

  13. The Development of Micromachined Gyroscope Structure and Circuitry Technology

    Dunzhu Xia

    2014-01-01

    Full Text Available This review surveys micromachined gyroscope structure and circuitry technology. The principle of micromachined gyroscopes is first introduced. Then, different kinds of MEMS gyroscope structures, materials and fabrication technologies are illustrated. Micromachined gyroscopes are mainly categorized into micromachined vibrating gyroscopes (MVGs, piezoelectric vibrating gyroscopes (PVGs, surface acoustic wave (SAW gyroscopes, bulk acoustic wave (BAW gyroscopes, micromachined electrostatically suspended gyroscopes (MESGs, magnetically suspended gyroscopes (MSGs, micro fiber optic gyroscopes (MFOGs, micro fluid gyroscopes (MFGs, micro atom gyroscopes (MAGs, and special micromachined gyroscopes. Next, the control electronics of micromachined gyroscopes are analyzed. The control circuits are categorized into typical circuitry and special circuitry technologies. The typical circuitry technologies include typical analog circuitry and digital circuitry, while the special circuitry consists of sigma delta, mode matching, temperature/quadrature compensation and novel special technologies. Finally, the characteristics of various typical gyroscopes and their development tendency are discussed and investigated in detail.

  14. Recent development of antifouling polymers: structure, evaluation, and biomedical applications in nano/micro-structures.

    Liu, Lingyun; Li, Wenchen; Liu, Qingsheng

    2014-01-01

    Antifouling polymers have been proven to be vital to many biomedical applications such as medical implants, drug delivery, and biosensing. This review covers the major development of antifouling polymers in the last 2 decades, including the material chemistry, structural factors important to antifouling properties, and how to challenge or evaluate the antifouling performances. We then discuss the applications of antifouling polymers in nano/micro-biomedical applications in the form of nanoparticles, thin coatings for medical devices (e.g., artificial joint, catheter, wound dressing), and nano/microscale fibers. © 2014 Wiley Periodicals, Inc.

  15. Discussion about effecting of stiffener in four bolts in a row end plate connection for long span and heavy load steel structures in Vietnam

    Huong, Khang T.; Nguyen, Cung H.

    2018-04-01

    Nowadays, steel structure industry in Vietnam is in strong development. The construction of steel structure becomes larger span and heavier load. The issue spawned a number of issues arise from optimizing connections. Typical of steel connections in prefabricated steel structure that is an end plate (face plate) bolted connection. When the connection carried a heavy load, then the number of bolts is required much more. Increasing the number of rows bolts will less effective because can still not enough strength requirements, the bolts in row near rotational center will level arm reduction, then it cannot carry heavy loads. The current solution is doing multiple bolts in a row. Current standards such as EN [1], AISC [2] are no specific guidelines for calculating the connection four bolts in a row that primarily assumes the way works like a T-stub of the two bolts a row. Some articles studied T-stub four bolts in a row [3], [4], [5], [6] by component method but it has some components which weren’t considered. In this paper, in order to provide a contribution to improve the T-stub four bolts in a row, the stiffener component in T-stub will be added and compared with T-stub without stiffener by the finite element model to demonstrate effectiveness in reducing stress and displacement of T-stub. It gives ideas for the economic design of four bolts in a row end plate connection in Vietnam for future.

  16. Development of simplified rotating plug seal structure

    Ueta, M.; Ichimiya, M.; Kanaoka, T.; Sekiya, H.; Ueda, S.; Ishibashi, S.

    1991-01-01

    We studied a compact and simplified rotating plug seal structure and conducted experiments for key elements of the concept such us the mechanical seal structure and sodium deposit prevention system. Good characteristics were confirmed for the mechanical seal structure, which utilizes an elastomer seal and thin lathe bearing. Applicability of the density barrier concept was also confirmed as the sodium deposit prevention system. This concept can be applied to actual plants. (author)

  17. Bilingual asynchronous online discussion groups: design and delivery of an eLearning distance study module for nurse academics in a developing country.

    Lewis, Peter A; Mai, Van Anh Thi; Gray, Genevieve

    2012-04-01

    The advent of eLearning has seen online discussion forums widely used in both undergraduate and postgraduate nursing education. This paper reports an Australian university experience of design, delivery and redevelopment of a distance education module developed for Vietnamese nurse academics. The teaching experience of Vietnamese nurse academics is mixed and frequently limited. It was decided that the distance module should attempt to utilise the experience of senior Vietnamese nurse academics - asynchronous online discussion groups were used to facilitate this. Online discussion occurred in both Vietnamese and English and was moderated by an Australian academic working alongside a Vietnamese translator. This paper will discuss the design of an online learning environment for foreign correspondents, the resources and translation required to maximise the success of asynchronous online discussion groups, as well as the rationale of delivering complex content in a foreign language. While specifically addressing the first iteration of the first distance module designed, this paper will also address subsequent changes made for the second iteration of the module and comment on their success. While a translator is clearly a key component of success, the elements of simplicity and clarity combined with supportive online moderation must not be overlooked. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Low-cost solar array structure development

    Wilson, A. H.

    1981-06-01

    Early studies of flat-plate arrays have projected costs on the order of $50/square meter for installed array support structures. This report describes an optimized low-cost frame-truss structure that is estimated to cost below $25/square meter, including all markups, shipping an installation. The structure utilizes a planar frame made of members formed from light-gauge galvanized steel sheet and is supposed in the field by treated-wood trusses that are partially buried in trenches. The buried trusses use the overburden soil to carry uplift wind loads and thus to obviate reinforced-concrete foundations. Details of the concept, including design rationale, fabrication and assembly experience, structural testing and fabrication drawings are included.

  19. Development of cold source moderator structure

    Aso, Tomokaze; Ishikura, Syuichi; Terada, Atsuhiko; Teshigawara, Makoto; Watanabe, Noboru; HIno, Ryutaro

    1999-01-01

    The cold and thermal neutrons generated at the target (which works as a spallation neutron source under a 5MW proton beam condition) is filtered with cold source moderators using supercritical hydrogen. Preliminary structural analysis was carried out to clarify technical problems on the concept of the thin-walled structure for the cold source moderator. Structural analytical results showed that the maximum stress of 1 12MPa occurred on the moderator surface, which exceeded the allowable design stresses of ordinary aluminum alloys. Flow patterns measured by water flow experiments agreed well with hydraulic analytical results, which showed that an impinging jet flow from an inner pipe of the moderator caused a recirculation flow on a large scale. Based on analytical and experimental results, new moderator structures with minute frames, blowing flow holes etc. were proposed to keep its strength and to suppress the recirculation flow. (author)

  20. Wakefield monitor development for CLIC accelerating structure

    Peauger, F; Girardot, P; Andersson, A; Riddone, G; Samoshkin, A; Solodko, A; Zennaro, R; Ruber, R

    2010-01-01

    Abstract To achieve high luminosity in CLIC, the accelerating structures must be aligned to an accuracy of 5 μm with respect to the beam trajectory. Position detectors called Wakefield Monitors (WFM) are integrated to the structure for a beam based alignment. This paper describes the requirements of such monitors. Detailed RF design and electromagnetic simulations of the WFM itself are presented. In particular, time domain computations are performed and an evaluation of the resolution is done for two higher order modes at 18 and 24 GHz. The mechanical design of a prototype accelerating structure with WFM is also presented as well as the fabrication status of three complete structures. The objective is to implement two of them in CTF3 at CERN for a feasibility demonstration with beam and high power rf.

  1. PEACE JOURNALISM PRACTICE AND DEVELOPMENT IN THE NORTHEAST OF NIGERIA: FOCUS GROUP DISCUSSION WITH SOME MEMBERS OF NTA CORRESPONDENTS’ DAMATURU, YOBE STATE

    Aondover Eric Msughter

    2018-02-01

    Full Text Available Peace journalism is fundamental like in any type of reporting. Thus, it facilitates reporters to disseminate information that would help attune to the development of a nation. Base on the available literature, the study discovered that the media have been variously blamed for their role in the exacerbation of different conflicts in complex and heterogeneous countries like Nigeria. The study uses social responsibility theory as a guiding principle. Likewise, Focus Group Discussions (FGD is applied as a methodological approach in data gathering among some selected members of NTA correspondents’ Damaturu, Yobe State. A total number of 10 practicing journalists were randomly selected in NTA, Damaturu. They discussed peace journalism practice and development in the Northeast of Nigeria. Arising from the discussions, the study concludes that all media organisations should imbibe the appropriate way of reporting peace journalism and development in the country, especially in the Northeast of Nigeria where cases of ethnic, religious, political and other types of conflicts have taken the lead.

  2. Economic development and industrial structure - an overview

    Nordaas, Hildegunn Kyvik

    1997-09-01

    The essay offers a selective review of central issues related to economic growth. The interrelationship between technological progress, capital accumulation, specialisation and industrial structure is emphasised. It is concluded that, first, there is little evidence that industrial structure plays an independent role in growth. Second, economists have been more successful in explaining the consequence of technological progress than the determinants of technological progress. However, even the consequences are not well understood and there is still a long way to go before general and well-documented policy implications can be drawn. (Author)

  3. Role of Lithology and Rock Structure in Drainage Development in ...

    Lithology and Rock structure play a vital role in the development of Drainage Network in any drainage basin. The drainage patterns upon land surface develop as directed by the underlying lithology and rock structure. In fact, lithology and rock structure together shape the basin and are decisive parameters of nature and ...

  4. The return to work discussion: a qualitative study of the line manager conversation about return to work and the development of an educational programme.

    Cohen, Debbie; Allen, Joanna; Rhydderch, Melody; Aylward, Mansel

    2012-07-01

    To investigate the conversation between line manager and employee about return to work to inform the development of an online interactive educational programme for line managers to improve the effectiveness of their discussions. An inductive qualitative approach, using the principles of action research and motivational interviewing were adopted. The results informed the development of the educational programme for line managers. Middle grade line managers in a large public services employer in the UK. Four discussion groups were conducted over a period of 8 months. Line managers explored the challenges of the return to work interview, analysed their interactions with employees and constructed the content of an educational programme. Multiple methods were used to build engagement with participants, including video and role-play. Nine line managers were recruited across 3 business areas. Managers recognised that their conversations focused on the organisations' policies and procedures and the outcome, rather than the interaction. They recognised the strength of shifting style to shared decision-making and guidance rather than process and instruction. These communication strategies were depicted in the educational programme. The content and flow of the return to work discussion is of high importance and influences employee behaviour and return to work outcomes.

  5. Electricity supply of Switzerland. Development and structure

    Mutzner, J.

    1995-01-01

    An overview of the history of the Swiss power supply since the founding of the Swiss Electricity Works Association in the year 1985 is provided. Power supply, requirements, linkage and exchange with other countries are dealt with. Further themes are the organizational structures, tariffs, power supply and energy policies, as well as national and international connections. 87 figs., 40 refs

  6. Daily nursing feedback and discussion – a method to develop skills and augment quality and rehabilitative nursing for patients with spinal cord injury

    Steensgaard, Randi; Bonne, Stine

    2017-01-01

    Abstract Content: Background: Rehabilitation pathways for patients admitted with a spinal cord injury (SCI) are becoming increasingly complex, even as admission times are becoming shorter and more intensive. At the Spinal Cord Injury Centre of Western Denmark this means there is a growing need...... for sharing knowledge and experience to develop professional nursing skills in providing rehabilitative nursing care at the highest level, and in making a positive and valuable contribution to collaboration across professions. Aim: To improve knowledge, skills, and behaviour in rehabilitative nursing services...... to SCI patients through nursing feedback and discussion. Method: Four days each week, the nursing group meets for a 20-minute session of feedback and discussion on professional nursing issues, led by a session moderator. All nurses, whether new arrivals or experienced employees, have equal opportunity...

  7. Development of structural health monitoring techniques using dynamics testing

    James, G.H. III [Sandia National Labs., Albuquerque, NM (United States). Experimental Structural Dynamics Dept.

    1996-03-01

    Today`s society depends upon many structures (such as aircraft, bridges, wind turbines, offshore platforms, buildings, and nuclear weapons) which are nearing the end of their design lifetime. Since these structures cannot be economically replaced, techniques for structural health monitoring must be developed and implemented. Modal and structural dynamics measurements hold promise for the global non-destructive inspection of a variety of structures since surface measurements of a vibrating structure can provide information about the health of the internal members without costly (or impossible) dismantling of the structure. In order to develop structural health monitoring for application to operational structures, developments in four areas have been undertaken within this project: operational evaluation, diagnostic measurements, information condensation, and damage identification. The developments in each of these four aspects of structural health monitoring have been exercised on a broad range of experimental data. This experimental data has been extracted from structures from several application areas which include aging aircraft, wind energy, aging bridges, offshore structures, structural supports, and mechanical parts. As a result of these advances, Sandia National Laboratories is in a position to perform further advanced development, operational implementation, and technical consulting for a broad class of the nation`s aging infrastructure problems.

  8. THE ESSENCE OF STRATEGY DEVELOPMENT COMPANY IN THE INTEGRATED STRUCTURE

    A. I. Khorev

    2014-01-01

    Full Text Available Summary. In the beginning of the article is defined a rational sequence of the consideration of the nature of the strategy of a company development, included into an integrated structure. Further the article describes the following items separately: "a strategy", "a development of a company", and "an integrational structure", applying them to companies included to the integrated structure; separating them from a strategy of development of an autonomous company. The article defines functions which such strategy must define, taking into consideration the nature of the strategy of the company development, included into an integrated structure. Next, the article defines six steps which describe a sequence of development of the strategy of the company development, included into an integrated structure. The analysis which is defined in the article allows determining a complete definition of essence of the strategy of the company development, included into an integrated structure. The article also defines a place of the strategy of development into the hierarchical structure of the strategies. The strategy of the company development, included into an integrated structure (as well as the strategy of development of an autonomous company -- is a competition strategy, and it separates "strategy of leadership for costs", “differentiation strategy”, and “strategy of focusing for costs”. Also authors are analyzed the strategy of the cost optimization. According to the complex definition of the strategy, and the strategy's place inside the hierarchical structure, the article defines functions which corporate, competitive, and functional strategies execute during the management of companies inside an integrational structure. The article presents characteristics of applied strategic decisions at different levels of all three types of strategies. The article's researches allow companies included to the integrated structure define their place inside the

  9. Barriers and Facilitators to Patient-Provider Communication When Discussing Breast Cancer Risk to Aid in the Development of Decision Support Tools.

    Yi, Haeseung; Xiao, Tong; Thomas, Parijatham S; Aguirre, Alejandra N; Smalletz, Cindy; Dimond, Jill; Finkelstein, Joseph; Infante, Katherine; Trivedi, Meghna; David, Raven; Vargas, Jennifer; Crew, Katherine D; Kukafka, Rita

    2015-01-01

    The purpose of this study was to identify barriers and facilitators to patient-provider communication when discussing breast cancer risk to aid in the development of decision support tools. Four patient focus groups (N=34) and eight provider focus groups (N=10) took place in Northern Manhattan. A qualitative analysis was conducted using Atlas.ti software. The coding yielded 62.3%-94.5% agreement. The results showed that 1) barriers are time constraints, lack of knowledge, low health literacy, and language barriers, and 2) facilitators are information needs, desire for personalization, and autonomy when communicating risk in patient-provider encounters. These results will inform the development of a patient-centered decision aid (RealRisks) and a provider-facing breast cancer risk navigation (BNAV) tool, which are designed to facilitate patient-provider risk communication and shared decision-making about breast cancer prevention strategies, such as chemoprevention.

  10. Structuring user-centred product development processes

    Hoolhorst, F.W.B.

    2012-01-01

    Within the last decades, product development industry has found itself facing a general increase in product use problems. These problems originate from a mismatch between the actual functionality that the product provides and the afforded product-user interaction versus the user’s expectations

  11. Leading Change: Faculty Development through Structured Collaboration

    Suzanne Painter

    2015-06-01

    Full Text Available There are relentless calls for innovation in higher education programs in response to media and policy-makers attention to such concerns as instructional quality, relevance to employment, costs, and time-to-degree. At the same time, the individual course remains the primary unit of instruction and there is little evidence of faculty development strategies to assist with changing core instructional practices. We faced that dilemma when we led an innovative doctoral program in educational leadership. Soon after beginning, we implemented a regular meeting of all faculty members teaching and advising in the program to address upcoming events and review student progress. Our retrospective analysis indicates that these meetings evolved as a practical and sustainable framework for faculty development in support of deep change for instructional practices. Here we describe the challenge of faculty development for change and draw lessons learned from our four years of leadership centered on experiential learning and community sense-making. We hope that program leaders who aspire to promote faculty development in conjunction with graduate program implementation will find these lessons useful.

  12. Fuel ethanol discussion paper

    1992-01-01

    In recognition of the potential benefits of ethanol and the merits of encouraging value-added agricultural development, a committee was formed to develop options for the role of the Ontario Ministry of Agriculture and Food in the further development of the ethanol industry in Ontario. A consultation with interested parties produced a discussion paper which begins with an outline of the role of ethanol as an alternative fuel. Ethanol issues which require industry consideration are presented, including the function of ethanol as a gasoline oxygenate or octane enhancer, environmental impacts, energy impacts, agricultural impacts, trade and fiscal implications, and regulation. The ethanol industry and distribution systems in Ontario are then described. The current industry consists of one ethanol plant and over 30 retail stations. The key issue for expanding the industry is the economics of producing ethanol. At present, production of ethanol in the short term depends on tax incentives amounting to 23.2 cents/l. In the longer term, a significant reduction in feedstock costs and a significant improvement in processing technology, or equally significant gasoline price increases, will be needed to create a sustainable ethanol industry that does not need incentives. Possible roles for the Ministry are identified, such as support for ethanol research and development, financial support for construction of ethanol plants, and active encouragement of market demand for ethanol-blended gasolines

  13. Round Table Discussion on EASTWEST

    Marina Tkacheva

    2017-12-01

    Full Text Available The discussion is focused on various aspects of interrelations between East and West. Its participants discuss the problems of the increasing tourist flows from China and the specific characteristics of Chinese tourists. The future development of tourism in the Baikal region is formulated, and the peculiarities of ethno tourism and its prospects are discussed.

  14. Retail Market Structure Development in Central Europe

    Martin Machek

    2012-12-01

    Full Text Available This article is analyzing the trends and development in the retailing sector in Central Europe, namely in the Czech Republic, Hungary, Poland and Slovakia. These markets serve about 63 million inhabitants. The retail industry in Central Europe has changed dramatically in the last two decades, and has become a model for successful transformation of emerging markets. The retail market is highly concentrated and dominated by Western European retail chains. International retail chains are using all formats of modern distribution. This article is focusing on the development of hypermarkets, supermarkets and discount stores. Due to the international retail chains, Central European countries benefit from a dense network of modern shopping places; the intense competition of highly productive retailers contributes to the lower level of inflation rate because of the so-called Wal-Mart Effect. The constant pressure on prices influences the marketing strategies of both retailers and suppliers.

  15. Open discussions on nuclear energy

    1978-01-01

    In the first part, economic prospects in the world and in the European Community and their repercussions on energy demand are examined. Supply structure and growth scenari are outlined. Present and potential contribution of nuclear energy to energy supply is developed. The pros and cons are given. In the second part is examined how the production and use of various form of energy including nuclear energy, can affect health and the environment, with special reference to waste of all kinds. Safety problems and risk of accidents are examined in both non nuclear and nuclear sectors. Prospects for a low energy society and economic and social implications of the use of new forms of energy are also discussed

  16. IMPROVING THE STUDENTS’ COMPETENCE IN DEVELOPING A PARAGRAPH OF DISCUSSION TEXTS USING THEMATIC PROGRESSION PATTERNS WITH COOPERATIVE LEARNING METHOD (TP-CL

    Farikah Farikah

    2017-04-01

    Full Text Available This research analyzes the effectiveness of thematic progression patterns with cooperative learning method (TP-CL in teaching the students’ competence in developing a paragraph of discussion texts and the effectiveness of teaching-learning activities of paragraph writing class. This mixed method research was conducted in the English Department of Tidar University of Magelang in the academic year of 2011/2012. The sample of this research were the fourth semester students of UTM. To collect the research data, writing test, observation and interview were used while to analyze the data, she used descriptive and inferential statistics for quantitative data and constant comparative method for qualitative data. The first result shows that implementing TP-CL is effective for teaching the students’ competence in developing a paragraph of discussion texts. It can be seen from the results of writing tests. Based on Brown and Bailey’s theory in Brown (2004, it can be seen that the mean score of organization element in pretest is 10.77 and the post test of paragraph writing is 16.73. The second result shows that there is an improvement of the effectiveness of teaching-learning activity of writing class by implementing TP-CL. The effectiveness can be seen from the indicators of effective teaching based on Blum in Nunan and Lamb (1996 and Creemer’s theory (1994. The results suggest that writing lecturers should introduce to develop a paragraph to the students in order that they can write paragraphs coherently and various theme in order that they can write the paragraph artistically.

  17. Developing a network-level structural capacity index for structural evaluation of pavements.

    2013-03-01

    The objective of this project was to develop a structural index for use in network-level pavement evaluation to facilitate : the inclusion of the pavements structural condition in pavement management applications. The primary goal of network-level...

  18. A structural analysis of Japanese economic development

    Tsujimura, Kazusuke; Tsujimura, Masako

    2018-01-01

    Japan successfully escaped from poverty after the world war and attained prosperity in a matter of two decades. There were two keys for the success. One was the priority production system – the idea to develop the industries at the bottom of the triangulated input-output table first, and to climb the triangle step by step. The second key for the success was the country’s unique financial system; they deliberately grew both long-term financial institutions for large enterprises and local credi...

  19. Development of mechanical structure design technology for LMR

    Yoo, Bong; Lee, Jae Han; Joo, Young Sang [and others

    2000-05-01

    In this project, fundamentals for conceptual design of mechanical structure system for LMR are independently established. The research contents are as follow; at first, conceptual design for SSC, design integration of interfaces, design consistency to keep functions and interfaces by developing arrangement of reactor system and 3 dimensional concept drawings, development and revision of preliminary design requirements and structural design basis, and evaluation of structural integrity for SSC following structural design criteria to check the conceptual design to be proper, at second, development of high temperature structure design and analysis technology and establishment of high temperature structural analysis codes and scheme, development of seismic isolation design concept to reduce seismic design loads to SCC and establishment of seismic analysis codes and scheme.

  20. Development of mechanical structure design technology for LMR

    Yoo, Bong; Lee, Jae Han; Joo, Young Sang

    2000-05-01

    In this project, fundamentals for conceptual design of mechanical structure system for LMR are independently established. The research contents are as follow; at first, conceptual design for SSC, design integration of interfaces, design consistency to keep functions and interfaces by developing arrangement of reactor system and 3 dimensional concept drawings, development and revision of preliminary design requirements and structural design basis, and evaluation of structural integrity for SSC following structural design criteria to check the conceptual design to be proper, at second, development of high temperature structure design and analysis technology and establishment of high temperature structural analysis codes and scheme, development of seismic isolation design concept to reduce seismic design loads to SCC and establishment of seismic analysis codes and scheme

  1. Development of analysis methods for seismically isolated nuclear structures

    Yoo, Bong; Lee, Jae-Han; Koo, Gyeng-Hoi

    2002-01-01

    KAERI's contributions to the project entitled Development of Analysis Methods for Seismically Isolated Nuclear Structures under IAEA CRP of the intercomparison of analysis methods for predicting the behaviour of seismically isolated nuclear structures during 1996-1999 in effort to develop the numerical analysis methods and to compare the analysis results with the benchmark test results of seismic isolation bearings and isolated nuclear structures provided by participating countries are briefly described. Certain progress in the analysis procedures for isolation bearings and isolated nuclear structures has been made throughout the IAEA CRPs and the analysis methods developed can be improved for future nuclear facility applications. (author)

  2. Using a partnership between academic faculty and a physical therapist liaison to develop a framework for an evidence-based journal club: a discussion.

    Austin, Tricia M; Richter, Randy R; Frese, Tracy

    2009-12-01

    Evidence-based practice (EBP) in rehabilitation is increasingly recognized as important. Despite the importance of EBP, physical therapists' knowledge of EBP varies. Journal clubs have been used to educate clinicians about EBP. This discussion paper describes the partnership between academic faculty members and a physical therapist at a community hospital, and the process used to develop a framework to implement an evidence-based journal club. The partnership blended the expertise of academic faculty members and a physical therapist with knowledge of EBP who served as the liaison between members of the partnership team and the clinicians at the community hospital. The three-step framework developed enabled the clinicians to learn about critical appraisal, participate in guided practice of critical appraisal with the liaison, and lead critical appraisal of a paper with the assistance of the liaison as needed. This process could be easily replicated by other partnerships between academic faculty members and clinicians. Developing partnerships like the one described enables academicians to provide service to the profession, may enhance physical therapists' knowledge of the principles of EBP and may encourage EBP.

  3. The Structure of the Managerial System of Higher Education's Development

    Levina, Elena Y.; Kutuev, Ruslan A.; Balakhnina, Lidia V.; Tumarov, Konstantin B.; Chudnovskiy, Alexey D.; Shagiev, ?ulat V.

    2016-01-01

    The research urgency is caused by necessity of planning regulation of higher education development at all levels of management. The purpose of this article is to develop the structure of a control system of higher education development, the Foundation of which is understanding of the quality of higher education as factor for development of the…

  4. Report: Discussion on the development of nano Ag/TiO2 coating bracket and its antibacterial property and biocompatibility in orthodontic treatment.

    Zhang, Ronghe; Zhang, Weiwei; Bai, Xueyan; Song, Xiaotong; Wang, Chunyan; Gao, Xinxin; Tian, Xubiao; Liu, Fengzhen

    2015-03-01

    This paper aims to explore the antibacterial property of nano Ag/TiO2 coating bracket for the common bacteria in oral cavity, and discuss its biocompatibility. Micro morphology in the surface of nano Ag/TiO2 coating bracket was detected by scanning electron microscope (SEM), and surface roughness of ordinary mental bracket, nano TiO2 coating bracket and nano Ag/TiO2 coating bracket were measured. First, antibacterial property of nano Ag/TiO2 coating bracket on the common bacteria in oral cavity was studied by sticking membrane method. Secondly, bonding strength of nano TiO2 coating and nano Ag/TiO2 coating bracket in groups were detected by scratching test. The result showed that, the synthetic nano Ag/TiO2 coating was nanogranular films with rigorous organizational structure, presenting as smooth and clean surface, and antibacterial rate of nano Ag/TiO2 coating for the common bacteria in oral cavity for 20 min was more than 79% in the dark. All the findings suggested that, nano Ag/TiO2 coating bracket not only has antibacterial effect but also has good biocompatibility, therefore, it can satisfy the clinical request of orthodontic treatment.

  5. Crystal structures and vibrational spectra of biuret co-crystals with cyanuric and glutaric acids, discussion of hydrogen bonding involving carbonyl groups

    Matulková, I.; Mathauserová, J.; Císařová, I.; Němec, I.; Fábry, Jan

    2016-01-01

    Roč. 231, č. 5 (2016), s. 291-300 ISSN 2194-4946 R&D Projects: GA ČR GA14-05506S Institutional support: RVO:68378271 Keywords : biuret * crystal structure analysis * hydrogen bonding * vibrational spectroscopy * X-ray diffraction Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.179, year: 2016

  6. Discussion in Postsecondary Classrooms

    Curt Dudley-Marling

    2013-11-01

    Full Text Available Spoken language is, arguably, the primary means by which teachers teach and students learn. Much of the literature on language in classrooms has focused on discussion that is seen as both a method of instruction and a curricular outcome. While much of the research on discussion has focused on K-12 classrooms, there is also a body of research examining the efficacy of discussion in postsecondary settings. This article provides a review of this literature in order to consider the effect of discussion on student learning in college and university classrooms, the prevalence of discussion in postsecondary settings, and the quality of discussion in these settings. In general, the results of research on the efficacy of discussion in postsecondary settings are mixed. More seriously, researchers have not been explicit about the meaning of discussion and much of what is called discussion in this body of research is merely recitation with minimal levels of student participation. Although the research on discussion in college and university classrooms is inconclusive, some implications can be drawn from this review of the research including the need for future researchers to clearly define what they mean by “discussion.”

  7. Research success and structured support: Developing early career ...

    This article discusses the programme structure, participants' evaluation of the year-long intervention and longitudinal data from a follow-up study conducted in 2008. It is evident in studies conducted in South Africa (Geber 2006) and elsewhere (Sorcinelli 2000) that support including mentoring and coaching is necessary for ...

  8. Developing an approach for teaching and learning about Lewis structures

    Kaufmann, Ilana; Hamza, Karim M.; Rundgren, Carl-Johan; Eriksson, Lars

    2017-08-01

    This study explores first-year university students' reasoning as they learn to draw Lewis structures. We also present a theoretical account of the formal procedure commonly taught for drawing these structures. Students' discussions during problem-solving activities were video recorded and detailed analyses of the discussions were made through the use of practical epistemology analysis (PEA). Our results show that the formal procedure was central for drawing Lewis structures, but its use varied depending on situational aspects. Commonly, the use of individual steps of the formal procedure was contingent on experiences of chemical structures, and other information such as the characteristics of the problem given. The analysis revealed a number of patterns in how students constructed, checked and modified the structure in relation to the formal procedure and the situational aspects. We suggest that explicitly teaching the formal procedure as a process of constructing, checking and modifying might be helpful for students learning to draw Lewis structures. By doing so, the students may learn to check the accuracy of the generated structure not only in relation to the octet rule and formal charge, but also to other experiences that are not explicitly included in the formal procedure.

  9. CuLi2Sn and Cu2LiSn: Characterization by single crystal XRD and structural discussion towards new anode materials for Li-ion batteries.

    Fürtauer, Siegfried; Effenberger, Herta S; Flandorfer, Hans

    2014-12-01

    The stannides CuLi 2 Sn (CSD-427095) and Cu 2 LiSn (CSD-427096) were synthesized by induction melting of the pure elements and annealing at 400 °C. The phases were reinvestigated by X-ray powder and single-crystal X-ray diffractometry. Within both crystal structures the ordered CuSn and Cu 2 Sn lattices form channels which host Cu and Li atoms at partly mixed occupied positions exhibiting extensive vacancies. For CuLi 2 Sn, the space group F-43m. was verified (structure type CuHg 2 Ti; a =6.295(2) Å; wR 2 ( F ²)=0.0355 for 78 unique reflections). The 4( c ) and 4( d ) positions are occupied by Cu atoms and Cu+Li atoms, respectively. For Cu 2 LiSn, the space group P 6 3 / mmc was confirmed (structure type InPt 2 Gd; a =4.3022(15) Å, c =7.618(3) Å; wR 2 ( F ²)=0.060 for 199 unique reflections). The Cu and Li atoms exhibit extensive disorder; they are distributed over the partly occupied positions 2( a ), 2( b ) and 4( e ). Both phases seem to be interesting in terms of application of Cu-Sn alloys as anode materials for Li-ion batteries.

  10. Multicomponent hydrogen-bonding organic solids constructed from 6-hydroxy-2-naphthoic acid and N-heterocycles: Synthesis, structural characterization and synthon discussion

    Zong, Yingxia; Shao, Hui; Pang, Yanyan; Wang, Debao; Liu, Kang; Wang, Lei

    2016-07-01

    Seven novel multicomponent crystals involving various substituted organic amine molecules and 6-hydroxy-2-naphthoic acid were prepared and characterized by using single crystal X-ray diffraction, infrared and thermogravimetric analyses (TGA). Crystal structures with 1,4-bis(imidazol) butane (L1) 1, 1,4-bis(imidazol-1-ylmethyl)benzene (L2) 2, 1-phenyl piperazine 3, 2-amino-4-hydroxy-6-methyl pyrimidine 4, 4,4'-bipyridine 5, 5,5'-dimethyl-2,2'-dipyridine 6, 2-amino-4,6-dimethyl pyrimidine 7 were determined. Among the seven molecular complexes, total proton transfer from 6-hydroxy-2-naphthoic acid to coformer has occurred in crystals 1-4, while the remaining were cocrystals. X-ray single-crystal structures of these complexes reveal that strong hydrogen bonding O-H···O/N-H···O/O-H···N and weak C-H···O/C-H···π/π···π intermolecular interactions direct the packing modes of molecular crystals together. The analysis of supramolecular synthons in the present structures shows that some classical supramolecular synthons like pyridine-carboxylic acid heterosynthon R22 (7) and aminopyridine-carboxylic acid heterosynthon R22 (8), are again observed in constructing the hydrogen-bonding networks in this paper. Besides, we noticed that water molecules act as a significant hydrogen-bonding connector in constructing supramolecular architectures of 3, 4, 6, and 7.

  11. Developing Structured-Learning Exercises for a Community Advanced Pharmacy Practice Experience

    Thomas, Renee Ahrens

    2006-01-01

    The recent growth in the number of pharmacy schools across the nation has resulted in the need for high-quality community advanced pharmacy practice experience (APPE) sites. A vital part of a student's education, these APPEs should be structured and formalized to provide an environment conducive to student learning. This paper discusses how to use a calendar, structured-learning activities, and scheduled evaluations to develop students' knowledge, skills, and abilities in a community pharmacy...

  12. Developing structured-learning exercises for a community advanced pharmacy practice experience.

    Thomas, Renee Ahrens

    2006-02-15

    The recent growth in the number of pharmacy schools across the nation has resulted in the need for high-quality community advanced pharmacy practice experience (APPE) sites. A vital part of a student's education, these APPEs should be structured and formalized to provide an environment conducive to student learning. This paper discusses how to use a calendar, structured-learning activities, and scheduled evaluations to develop students' knowledge, skills, and abilities in a community pharmacy setting.

  13. Notes on quantitative structure-properties relationships (QSPR) (1): A discussion on a QSPR dimensionality paradox (QSPR DP) and its quantum resolution.

    Carbó-Dorca, Ramon; Gallegos, Ana; Sánchez, Angel J

    2009-05-01

    Classical quantitative structure-properties relationship (QSPR) statistical techniques unavoidably present an inherent paradoxical computational context. They rely on the definition of a Gram matrix in descriptor spaces, which is used afterwards to reduce the original dimension via several possible kinds of algebraic manipulations. From there, effective models for the computation of unknown properties of known molecular structures are obtained. However, the reduced descriptor dimension causes linear dependence within the set of discrete vector molecular representations, leading to positive semi-definite Gram matrices in molecular spaces. To resolve this QSPR dimensionality paradox (QSPR DP) here is proposed to adopt as starting point the quantum QSPR (QQSPR) computational framework perspective, where density functions act as infinite dimensional descriptors. The fundamental QQSPR equation, deduced from employing quantum expectation value numerical evaluation, can be approximately solved in order to obtain models exempt of the QSPR DP. The substitution of the quantum similarity matrix by an empirical Gram matrix in molecular spaces, build up with the original non manipulated discrete molecular descriptor vectors, permits to obtain classical QSPR models with the same characteristics as in QQSPR, that is: possessing a certain degree of causality and explicitly independent of the descriptor dimension. 2008 Wiley Periodicals, Inc.

  14. Discussion on the structural origins of the fracture toughness and hardness changes in rapidly quenched borosilicate glasses: a molecular dynamics study

    Kieu, L.H.; Kilymis, D.; Delaye, J.M.; Peuget, S.

    2014-01-01

    Understanding radiation effects in nuclear glasses is important in order to assess their long term behaviour in a geological repository. In this paper, the results obtained by classical molecular dynamics about the mechanical properties of a simplified SiO 2 - B 2 O 3 - Na 2 O glass with the same molar proportions as in the real French nuclear glass were reviewed. A pristine and a disordered structure, representative of the irradiated one, were prepared in order to address the question of the radiation effects on the fracture toughness and hardness. In a first step, fracture simulations were performed to compare the atomistic mechanisms in the pristine and disordered glasses. In a second step, nano indentation was simulated using a diamond tip and again the pristine and disordered glass behaviors were compared. The depolymerisation associated to the glass disordering, in particular the increase of the tri-coordinated boron concentration relative to the tetra-coordinated boron concentration improves the fracture resistance by favouring the plastic flows. On the contrary, the swelling of the disordered glass limits the fracture resistance by facilitating the cavity formation. The first effect is dominant in the case of the glass investigated here because, experimentally, the fracture toughness increases after irradiation. Concerning the hardness, both the decrease of the boron coordination in parallel with non-bridging oxygen formation and free volume accumulation lead to a hardness decrease because the more disordered and open structure facilitates the tip penetration. (authors)

  15. Development and modeling of self-deployable structures

    Neogi, Depankar

    Deployable space structures are prefabricated structures which can be transformed from a closed, compact configuration to a predetermined expanded form in which they are stable and can bear loads. The present research effort investigates a new family of deployable structures, called the Self-Deployable Structures (SDS). Unlike other deployable structures, which have rigid members, the SDS members are flexible while the connecting joints are rigid. The joints store the predefined geometry of the deployed structure in the collapsed state. The SDS is stress-free in both deployed and collapsed configurations and results in a self-standing structure which acquires its structural properties after a chemical reaction. Reliability of deployment is one of the most important features of the SDS, since it does not rely on mechanisms that can lock during deployment. The unit building block of these structures is the self-deployable structural element (SDSE). Several SDSE members can be linked to generate a complex building block such as a triangular or a tetrahedral structure. Different SDSE and SDS concepts are investigated in the research work, and the performance of SDS's are experimentally and theoretically explored. Triangular and tetrahedral prototype SDS have been developed and presented. Theoretical efforts include modeling the behavior of 2-dimensional SDSs. Using this design tool, engineers can study the effects of different packing configurations and deployment sequence; and perform optimization on the collapsed state of a structure with different external constraints. The model also predicts if any lockup or entanglement occurs during deployment.

  16. Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing

    2017-09-29

    Additive Manufacturing by Jared M Gardner and Thomas A Plaisted Approved for public release; distribution is unlimited...Laboratory Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing by Thomas A Plaisted Weapons...Structures Using Stereolithographic Additive Manufacturing 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Jared

  17. Changes in Nuclear Structure During Wheat Endosperm Development

    Wegel, E.

    2005-01-01

    This thesis is an investigation into the structure of wheat endosperm nuclei starting with nuclear divisions and migration during syncytium formation followed by the development of nuclear shape and positioning of chromosome territories and ending with changes in subchromosomal structure during the

  18. Learning through Discussions

    Ellis, Robert A.; Calvo, Rafael; Levy, David; Tan, Kelvin

    2004-01-01

    Students studying a third-year e-commerce subject experienced face-to-face and online discussions as an important part of their learning experience. The quality of the students' experiences of learning through those discussions is investigated in this study. This study uses qualitative approaches to investigate the variation in the students'…

  19. Integrating personality structure, personality process, and personality development

    Baumert, Anna; Schmitt, Manfred; Perugini, Marco; Johnson, Wendy; Blum, Gabriela; Borkenau, Peter; Costantini, Giulio; Denissen, J.J.A.; Fleeson, William; Grafton, Ben; Jayawickreme, Eranda; Kurzius, Elena; MacLeod, Colin; Miller, Lynn C.; Read, Stephen J.; Robinson, Michael D.; Wood, Dustin; Wrzus, Cornelia

    2017-01-01

    In this target article, we argue that personality processes, personality structure, and personality development have to be understood and investigated in integrated ways in order to provide comprehensive responses to the key questions of personality psychology. The psychological processes and

  20. Improved tank car design development : ongoing studies on sandwich structures

    2009-03-02

    The Government and industry have a common interest in : improving the safety performance of railroad tank cars carrying : hazardous materials. Research is ongoing to develop strategies : to maintain the structural integrity of railroad tank cars carr...

  1. Development of Hybrid Product Breakdown Structure for NASA Ground Systems

    Monaghan, Mark W.; Henry, Robert J.

    2013-01-01

    The Product Breakdown Structure is traditionally a method of identification of the products of a project in a tree structure. It is a tool used to assess, plan, document, and display the equipment requirements for a project. It is part of a product based planning technique, and attempts to break down all components of a project in as much detail as possible, so that nothing is overlooked. The PBS for ground systems at the Kennedy Space Center is being developed to encompass the traditional requirements including the alignment of facility, systems, and components to the organizational hierarchy. The Ground Operations Product Breakdown Structure is a hybrid in nature in that some aspects of a work breakdown structure will be incorporated and merged with the Architecture Concept of Operations, Master Subsystem List, customer interface, and assigned management responsibility. The Ground Operations Product Breakdown Structure needs to be able to identify the flexibility of support differing customers (internal and external) usage of ground support equipment within the Kennedy Space Center launch and processing complex. The development of the Product Breakdown Structure is an iterative activity Initially documenting the organization hierarchy structure and relationships. The Product Breakdown Structure identifies the linkage between the customer program requirements, allocation of system resources, development of design goals, and identification logistics products. As the Product Breakdown Structure progresses the incorporation of the results of requirement planning for the customer occurs identifying facility needs and systems. The mature Product Breakdown Structure is baselined with a hierarchical drawing, the Product Breakdown Structure database, and an associated document identifying the verification of the data through the life cycle of the program/product line. This paper will document, demonstrate, and identify key aspects of the life cycle of a Hybrid Product

  2. Are Clusters Races? A Discussion of the Rhetorical Appropriation of Rosenberg et al.'s “Genetic Structure of Human Populations”

    Melissa Wills

    2017-01-01

    Full Text Available Noah Rosenberg et al.'s 2002 article “Genetic Structure of Human Populations” reported that multivariate genomic analysis of a large cell line panel yielded reproducible groupings (clusters suggestive of individuals' geographical origins. The paper has been repeatedly cited as evidence that traditional notions of race have a biological basis, a claim its authors do not make. Critics of this misinterpretation have often suggested that it follows from interpreters' personal biases skewing the reception of an objective piece of scientific writing. I contend, however, that the article itself to some degree facilitates this misrepresentation. I analyze in detail several verbal and visual features of the original article that may predispose aspects of its racial interpretation; and, tracing the arguments of one philosopher and one popular science writer, I show how these features are absorbed, transformed into arguments for a biological basis of race, and re-attributed to the original. The essay demonstrates how even slight ambiguities can enable the misappropriation of scientific writing, unintentionally undermining the authors' stated circumspection on the relationship between cluster and race.

  3. Design development of graphite primary structures enables SSTO success

    Biagiotti, V. A.; Yahiro, J. S.; Suh, Daniel E.; Hodges, Eric R.; Prior, Donald J.

    1997-01-01

    This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA's X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman's approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Section Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria.

  4. Monitoring structure development in milk acidification using diffuse reflectance profiles

    Skytte, Jacob Lercke; Andersen, Ulf; Møller, Flemming

    2012-01-01

    are needed so that the production can be carried out consistently, regardless of day-to-day variations in the raw materials. Casein micelles aggregate during milk acidification, which leads to formation of a gel network. This change of structure is important for the development of a range of dairy products......, protein, and temperature in the acidification process is conducted. The purpose of the experiment is to investigate how the change of these parameters affects the diffuse reflectance properties as well as to demonstrate the relation between the optical parameters and structure formation in milk......The structure of dairy products is important for the consumer, and milk acidification plays a central role for structural development. To ensure the best possible consumer experience, it is important that a product’s structural properties are stable. Therefore process and quality control tools...

  5. Development of XAFS Into a Structure Determination Technique

    Stern, E. A.

    After the detection of diffraction of x-rays by M. Laue in 1912, the technique was soon applied to structure determination by Bragg within a year. On the other hand, although the edge steps in X-Ray absorption were discovered even earlier by Barkla and both the near edge (XANES) and extended X-Ray fine structure (EXAFS) past the edge were detected by 1929, it still took over 40 years to realize the structure information contained in this X-Ray absorption fine structure (XAFS). To understand this delay a brief historical review of the development of the scientific ideas that transformed XAFS into the premiere technique for local structure determination is given. The development includes both advances in theoretical understanding and calculational capabilities, and in experimental facilities, especially synchrotron radiation sources. The present state of the XAFS technique and its capabilities are summarized.

  6. The development of structural x-ray crystallography

    Woolfson, M. M.

    2018-03-01

    From its birth in 1912, when only the simplest structures could be solved, x-ray structural crystallography is now able to solve macromolecular structures containing many thousands of independent non-hydrogen atoms. This progress has depended on, and been driven by, great technical advances in the development of powerful synchrotron x-ray sources, advanced automated equipment for the collection and storage of large data sets and powerful computers to deal with everything from data processing to running programmes employing complex algorithms for the automatic solution of structures. The sheer number of developments in the subject over the past century makes it impossible for this review to be exhaustive, but it will describe some major developments that will enable the reader to understand how the subject has grown from its humble beginnings to what it is today.

  7. Using Learning Trajectories for Teacher Learning to Structure Professional Development

    Bargagliotti, Anna E.; Anderson, Celia Rousseau

    2017-01-01

    As a result of the increased focus on data literacy and data science across the world, there has been a large demand for professional development in statistics. However, exactly how these professional development opportunities should be structured remains an open question. The purpose of this paper is to describe the first iteration of a design…

  8. Poverty—A structural problem of developing countries

    Wülker, Gabriele

    1981-01-01

    The contrast between industrialized and developing countries is often seen as one between two opposites: Rich countries—poor countries. But the poverty in the developing countries is by no means identical with the need for help as perceived in the industrialized societies. Poverty in the Third World is, as the following article shows, a structural problem.

  9. Students' Development of Structure Sense for the Distributive Law

    Schüler-Meyer, Alexander

    2017-01-01

    After being introduced to the distributive law in meaningful contexts, students need to extend its scope of application to unfamiliar expressions. In this article, a process model for the development of structure sense is developed. Building on this model, this article reports on a design research project in which exercise tasks support students…

  10. Development of a national code of practice for structural masonry ...

    The problems and constraints faced by most developing countries, particularly Ghana, in developing codes of practice for structural masonry are highlighted. The steps that must be undertaken through the coordinated efforts of the National Standards Boards, Research Institutions, Universities and Professional Bodies in the ...

  11. An open dialogue on the draft focus and themes for the next ITS strategic research plan : engaging stakeholders in their discussion and development.

    2012-12-01

    The : purpose : of : this : document : is : to : identify : the : focus : and : themes : for : the : next : installment : of : the : ITS : Strategic : Research : Plan : and : to : invite : stakeholders : to : participate : in : their : discussion. : ...

  12. Development of SC structure modularization in Nuclear Power Plant

    Mun, Taeyoup

    2008-01-01

    New Focus on NPP are Rising Concerns on Global Warming, Potential energy crisis (geo-political), Improved reliability and safety of nuclear power plant, Advent of Generation 3+ NPP technology and Economical Energy Resource. New NPPs are 6 units in Korea and 23 in Asia being built, 32 units being planned in China by 2020 (150 by 2050), 10 units being planned in US by 2020 and IAEA expects $200 billions on NPP construction next 25 years (up to 30% of total world energy). □ SC(Steel Plate Concrete) structure · Steel Plate is used as a Structural Element instead of Reinforcing Bars in RC · SC structure consists of Steel Plate with Headed Studs. Connected by Tie-bars - The Primary Purpose of Tie-bars is to Stiffen and Hold Together the Plates during Construction Process - Headed Studs are Welded to the Inside of Steel Plate for composite action □ Benefits of SC Structure · Shorten Construction Duration for Re bar, Forming and Scaffolding Works · Minimize Site Labors · Improve the Construction Quality · Enable Construction Sites to be kept Clean □ SC Modularization · Fit for Modular Construction for Structural Features · Fit for Modular Construction for Structural Features · Inattentively Effective for Integrated Modules · Pre-fabrication, Pre-assembly and Modularization □ Project Overview · Project Name: Development of SC structure for Modularization in NPP · Project Type: Electric Power Industry R and D (Ministry of Knowledge Economy) · Duration: Sep. 2005 ∼ Aug. 2008 (36 Months) · Research Team and Scopes - Project Management: Korea Hydro and Nuclear Power Company (KHNP) - Development of Code and Standards for SC Structure: Korea Society of Steel Construction (KSSC) Korea Electric Power Research Institute (KEPRI) - Development of SC Structural Analysis and Design: Korea Power Engineering Company (KOPEC) - Development of Construction Techniques for SC Modularization: KHNP, Korea Institute of Nuclear Safety(KINS), KOPEC □ Performance

  13. Development of a design basis tornado and structural design criteria for Lawrence Livermore Laboratory's Site 300

    McDonald, J.R.; Minor, J.E.; Mehta, K.C.

    1975-11-01

    Criteria are prescribed and guidance is provided for professional personnel who are involved with the evaluation of existing buildings and facilities at Site 300 near Livermore, California to resist the possible effects of extreme winds and tornadoes. The development of parameters for the effects of tornadoes and extreme winds and guidelines for evaluation and design of structures are presented. The investigations conducted are summarized and the techniques used for arriving at the combined tornado and extreme wind risk model are discussed. The guidelines for structural design methods for calculating pressure distributions on walls and roofs of structures and methods for accommodating impact loads from missiles are also presented

  14. Structural and Maturational Covariance in Early Childhood Brain Development.

    Geng, Xiujuan; Li, Gang; Lu, Zhaohua; Gao, Wei; Wang, Li; Shen, Dinggang; Zhu, Hongtu; Gilmore, John H

    2017-03-01

    Brain structural covariance networks (SCNs) composed of regions with correlated variation are altered in neuropsychiatric disease and change with age. Little is known about the development of SCNs in early childhood, a period of rapid cortical growth. We investigated the development of structural and maturational covariance networks, including default, dorsal attention, primary visual and sensorimotor networks in a longitudinal population of 118 children after birth to 2 years old and compared them with intrinsic functional connectivity networks. We found that structural covariance of all networks exhibit strong correlations mostly limited to their seed regions. By Age 2, default and dorsal attention structural networks are much less distributed compared with their functional maps. The maturational covariance maps, however, revealed significant couplings in rates of change between distributed regions, which partially recapitulate their functional networks. The structural and maturational covariance of the primary visual and sensorimotor networks shows similar patterns to the corresponding functional networks. Results indicate that functional networks are in place prior to structural networks, that correlated structural patterns in adult may arise in part from coordinated cortical maturation, and that regional co-activation in functional networks may guide and refine the maturation of SCNs over childhood development. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  15. Summary of group discussions

    2009-01-01

    A key aspect of the workshop was the interaction and exchange of ideas and information among the 40 participants. To facilitate this activity the workshop participants were divided into five discussions groups. These groups reviewed selected subjects and reported back to the main body with summaries of their considerations. Over the 3 days the 5 discussion groups were requested to focus on the following subjects: the characteristics and capabilities of 'good' organisations; how to ensure sufficient resources; how to ensure competence within the organisation; how to demonstrate organisational suitability; the regulatory oversight processes - including their strengths and weaknesses. A list of the related questions that were provided to the discussion groups can be found in Appendix 3. Also included in Appendix 3 are copies of the slides the groups prepared that summarised their considerations

  16. Focus group discussions

    Hennink, Monique M

    2014-01-01

    The Understanding Research series focuses on the process of writing up social research. The series is broken down into three categories: Understanding Statistics, Understanding Measurement, and Understanding Qualitative Research. The books provide researchers with guides to understanding, writing, and evaluating social research. Each volume demonstrates how research should be represented, including how to write up the methodology as well as the research findings. Each volume also reviews how to appropriately evaluate published research. Focus Group Discussions addresses the challenges associated with conducting and writing focus group research. It provides detailed guidance on the practical and theoretical considerations in conducting focus group discussions including: designing the discussion guide, recruiting participants, training a field team, moderating techniques and ethical considerations. Monique Hennink describes how a methodology section is read and evaluated by others, such as journal reviewers or ...

  17. Plutonium roundtable discussion

    Penneman, R.A.

    1982-01-01

    The roundtable discussion began with remarks by the chairman who pointed out the complicated nature of plutonium chemistry. Judging from the papers presented at this symposium, he noticed a pattern which indicated to him the result of diminished funding for investigation of basic plutonium chemistry and funding focused on certain problem areas. Dr. G.L. silver pointed to plutonium chemists' erroneous use of a simplified summary equation involving the disproportionation of Pu(EV) and their each of appreciation of alpha coefficients. To his appreciation of alpha coefficients. To his charges, Dr. J.T. Bell spoke in defense of the chemists. This discussion was followed by W.W. Schulz's comments on the need for experimental work to determine solubility data for plutonium in its various oxidation states under geologic repository conditions. Discussion then turned to plutonium pyrachemical process with Dana C. Christensen as the main speaker. This paper presents edited versions of participants' written version

  18. RESULTS AND DISCUSSION

    Anireh UC

    forecasting of relevant hydraulic structures in Calabar. The logarithmic model is a two-parameter form of IDF equation. ... [16] for intensities duration-frequency curves for ungauged sites. ..... (Table 2). A similar trend was also observed between.

  19. Study on structural seismic margin and probabilistic seismic risk. Development of a structural capacity-seismic risk diagram

    Nakajima, Masato; Ohtori, Yasuki; Hirata, Kazuta

    2010-01-01

    Seismic margin is extremely important index and information when we evaluate and account seismic safety of critical structures, systems and components quantitatively. Therefore, it is required that electric power companies evaluate the seismic margin of each plant in back-check of nuclear power plants in Japan. The seismic margin of structures is usually defined as a structural capacity margin corresponding to design earthquake ground motion. However, there is little agreement as to the definition of the seismic margin and we have no knowledge about a relationship between the seismic margin and seismic risk (annual failure probability) which is obtained in PSA (Probabilistic Safety Assessment). The purpose of this report is to discuss a definition of structural seismic margin and to develop a diagram which can identify a relation between seismic margin and seismic risk. The main results of this paper are described as follows: (1) We develop seismic margin which is defined based on the fact that intensity of earthquake ground motion is more appropriate than the conventional definition (i.e., the response-based seismic margin) for the following reasons: -seismic margin based on earthquake ground motion is invariant where different typed structures are considered, -stakeholders can understand the seismic margin based on the earthquake ground motion better than the response-based one. (2) The developed seismic margin-risk diagram facilitates us to judge easily whether we need to perform detailed probabilistic risk analysis or only deterministic analysis, given that the reference risk level although information on the uncertainty parameter beta is not obtained. (3) We have performed numerical simulations based on the developed method for four sites in Japan. The structural capacity-risk diagram differs depending on each location because the diagram is greatly influenced by seismic hazard information for a target site. Furthermore, the required structural capacity

  20. Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials

    Werkheiser, Niki J.; Fiske, Michael R.; Edmunson, Jennifer E.; Khoshnevis, Berokh

    2015-01-01

    For long-duration missions on other planetary bodies, the use of in situ materials will become increasingly critical. As human presence on these bodies expands, so must the breadth of the structures required to accommodate them including habitats, laboratories, berms, radiation shielding for natural radiation and surface reactors, garages, solar storm shelters, greenhouses, etc. Planetary surface structure manufacturing and assembly technologies that incorporate in situ resources provide options for autonomous, affordable, pre-positioned environments with radiation shielding features and protection from micrometeorites, exhaust plume debris, and other hazards. The ability to use in-situ materials to construct these structures will provide a benefit in the reduction of up-mass that would otherwise make long-term Moon or Mars structures cost prohibitive. The ability to fabricate structures in situ brings with it the ability to repair these structures, which allows for the self-sufficiency and sustainability necessary for long-duration habitation. Previously, under the auspices of the MSFC In-Situ Fabrication and Repair (ISFR) project and more recently, under the jointly-managed MSFC/KSC Additive Construction with Mobile Emplacement (ACME) project, the MSFC Surface Structures Group has been developing materials and construction technologies to support future planetary habitats with in-situ resources. One such additive construction technology is known as Contour Crafting. This paper presents the results to date of these efforts, including development of novel nozzle concepts for advanced layer deposition using this process. Conceived initially for rapid development of cementitious structures on Earth, it also lends itself exceptionally well to the automated fabrication of planetary surface structures using minimally processed regolith as aggregate, and binders developed from in situ materials as well. This process has been used successfully in the fabrication of

  1. Discussion on nuclear issues

    Andrlova, Z.

    2012-01-01

    Treatment of the radioactive waste and utilisation of the ionisation radiation. Interesting contributions to two topics appeared in conference of Slovak Nuclear Society in Casta-Papiernicka in May 2012. The members from the female section 'Women in nuclear sector; were discussing in particular of the mind-set of Europeans to radioactive waste and novelties in nuclear medicine. (author)

  2. Summary of discussion

    2006-01-01

    This document provides summaries of the discussions occurred during the second international workshop on the indemnification of nuclear damage. It concerns the second accident scenario: a fire on board of a ship transporting enriched uranium hexafluoride along the Danube River. (A.L.B.)

  3. Discussion 2: David Dobbs

    Dobbs, David; Murray-Rust, Peter; Hatcher, Jordan; Pollock, Rufus

    2010-01-01

    David Dobbs writes on science, medicine and culture. He has contributed to a diversity of publications, including Scientific American, Slate magazine, Wired, Audubon, Atlantic Monthly, and the New York Times magazine. He has also authored a number of books. Other participants in this discussion were Peter Murray-Rust, Jordan Hatcher, and Rufus Pollock.

  4. Summary and Discussion.

    Hetherington, E. Mavis

    1992-01-01

    Summarizes and discusses results of the longitudinal study that comprises this monograph issue. Results concern: (1) marital, parent-child, and sibling relationships in families with single and remarried mothers; (2) the relationship between parenting style and adolescent adjustment; and (3) the relationship between marital transitions and…

  5. WORKSHOP: Discussion, debate, deliberation

    Jeliazkova, Margarita I.

    2014-01-01

    Discussing, deliberating and debating are a core part of any democratic process. To organise these processes well, a great deal of knowledge and skill is required. It is not simple to find a good balance between a number of elements: appropriate language and terminology; paying attention to solid

  6. Development of a Computer Application to Simulate Porous Structures

    S.C. Reis

    2002-09-01

    Full Text Available Geometric modeling is an important tool to evaluate structural parameters as well as to follow the application of stereological relationships. The obtention, visualization and analysis of volumetric images of the structure of materials, using computational geometric modeling, facilitates the determination of structural parameters of difficult experimental access, such as topological and morphological parameters. In this work, we developed a geometrical model implemented by computer software that simulates random pore structures. The number of nodes, number of branches (connections between nodes and the number of isolated parts, are obtained. Also, the connectivity (C is obtained from this application. Using a list of elements, nodes and branches, generated by the software, in AutoCAD® command line format, the obtained structure can be viewed and analyzed.

  7. Recent developments of discrete material optimization of laminated composite structures

    Lund, Erik; Sørensen, Rene

    2015-01-01

    This work will give a quick summary of recent developments of the Discrete Material Optimization approach for structural optimization of laminated composite structures. This approach can be seen as a multi-material topology optimization approach for selecting the best ply material and number...... of plies in a laminated composite structure. The conceptual combinatorial design problem is relaxed to a continuous problem such that well-established gradient based optimization techniques can be applied, and the optimization problem is solved on basis of interpolation schemes with penalization...

  8. Implementing the leadership development plans of faculty education fellows: a structured approach.

    Goldman, Ellen F; Wesner, Marilyn; Karnchanomai, Ornpawee; Haywood, Yolanda

    2012-09-01

    The literature about medical education faculty fellowship programs, which have grown in popularity, quantifies program characteristics, provides exemplars, and reports on delivery strategies. Evaluation is generally limited to satisfaction measures, with a few longitudinal studies of postprogram achievements, but none on the process of making these changes.The authors describe the development of faculty members' postfellowship leadership plans and a structured process to support plan implementation. They also compare the implementation of initiatives specified in individual leadership development plans of two cohorts of faculty. The participants were graduates of a fellowship program at the George Washington University School of Medicine and Health Sciences. One cohort participated in a structured process of monthly reciprocal peer coaching, followed by journaling and quarterly interviews with the program director; a second cohort functioned as a comparison with no structured process supporting them. (Study years are not provided because they could inadvertently lead to the identification of the participants.) Despite similar implementation challenges expressed by both cohorts, the cohort participating in the structured process implemented 23% more of their planned initiatives, including 2 times as many educational leadership initiatives and 3.5 times as many initiatives related to developing new curriculum. The combination of plan development, reciprocal peer coaching, journaling, and interview discussions provided faculty with focus, structure, and personal support. This structured process supporting leadership plan development and implementation can be easily transferred to other fellowship programs in medical education, adapted for use with residents and fellows, and used in similar development programs.

  9. Integrated structural analysis tool using the linear matching method part 1 – Software development

    Ure, James; Chen, Haofeng; Tipping, David

    2014-01-01

    A number of direct methods based upon the Linear Matching Method (LMM) framework have been developed to address structural integrity issues for components subjected to cyclic thermal and mechanical load conditions. This paper presents a new integrated structural analysis tool using the LMM framework for the assessment of load carrying capacity, shakedown limit, ratchet limit and steady state cyclic response of structures. First, the development of the LMM for the evaluation of design limits in plasticity is introduced. Second, preliminary considerations for the development of the LMM into a tool which can be used on a regular basis by engineers are discussed. After the re-structuring of the LMM subroutines for multiple central processing unit (CPU) solution, the LMM software tool for the assessment of design limits in plasticity is implemented by developing an Abaqus CAE plug-in with graphical user interfaces. Further demonstration of this new LMM analysis tool including practical application and verification is presented in an accompanying paper. - Highlights: • A new structural analysis tool using the Linear Matching Method (LMM) is developed. • The software tool is able to evaluate the design limits in plasticity. • Able to assess limit load, shakedown, ratchet limit and steady state cyclic response. • Re-structuring of the LMM subroutines for multiple CPU solution is conducted. • The software tool is implemented by developing an Abaqus CAE plug-in with GUI

  10. Geopressured-geothermal energy development: government incentives and institutional structures

    Frederick, D.O.; Prestwood, D.C.L.; Roberts, K.; Vanston, J.H. Jr.

    1979-01-01

    The following subjects are included: a geothermal resource overview, the evolution of the current Texas geopressured-geothermal institutional structure, project evaluation with uncertainty and the structure of incentives, the natural gas industry, the electric utility industry, potential governmental participants in resource development, industrial users of thermal energy, current government incentives bearing on geopressured-geothermal development, six profiles for utilization of the geopressured-geothermal resources in the mid-term, and probable impacts of new government incentives on mid-term resource utilization profiles. (MHR)

  11. Panel discussion : contract design

    Vallas, A. [Sempra Energy Trading, Toronto, ON (Canada); Vegh, G. [MacLeod Dixon, Toronto, ON (Canada); McGee, M. [Energy Profiles Ltd., Etobicoke, ON (Canada); Zaremba, T. [Direct Energy Marketing, Calgary, AB (Canada); Seshan, A. [Larson and Toubro Information Technology, Toronto, ON (Canada); Harricks, P. [Gowlings, Toronto, ON (Canada); Bertoldi, L. [Borden Ladner Gervais, Toronto, ON (Canada); Taylor, R. [Hydro One Networks Inc., Markham, ON (Canada)

    2003-05-01

    This session presented highlights of the comments of 8 panelists who discussed the issue of contract design. The new electricity market in Ontario has introduced the energy trader, who enters into a contract with the consumer, based on the spot price set by the Independent Electricity Market Operator. Every contract has a fixed price payer as well as floating-price payers. If the floating price for a given amount of energy is higher than the fixed price, then the consumer gets the difference. Confusion, however, arises with the purchase of retail physical power in the market, particularly in deciding a fixed rate that the consumer will be paying. Different billing options were also discussed with emphasis on mid to large retail customers that have portfolios in the tens of MW and up to 100 MW or more. figs.

  12. Panel discussion : contract design

    Vallas, A.; Vegh, G.; McGee, M.; Zaremba, T.; Seshan, A.; Harricks, P.; Bertoldi, L.; Taylor, R.

    2003-01-01

    This session presented highlights of the comments of 8 panelists who discussed the issue of contract design. The new electricity market in Ontario has introduced the energy trader, who enters into a contract with the consumer, based on the spot price set by the Independent Electricity Market Operator. Every contract has a fixed price payer as well as floating-price payers. If the floating price for a given amount of energy is higher than the fixed price, then the consumer gets the difference. Confusion, however, arises with the purchase of retail physical power in the market, particularly in deciding a fixed rate that the consumer will be paying. Different billing options were also discussed with emphasis on mid to large retail customers that have portfolios in the tens of MW and up to 100 MW or more. figs

  13. Discussion with CERN Directorate

    CERN. Geneva

    2017-01-01

    Please note that the Discussion with CERN Directorate will be transmitted also in the following rooms: Council Chamber - 503-1-001 IT Amphitheatre - 31-3-004 Prevessin 774-R-013 Simultaneous interpreting into French and English will be available in the Main Auditorium. Une interprétation simultanée en français et en anglais sera disponible dans l'amphithéâtre principal.

  14. Applying Banks' Typology of Ethnic Identity Development and Curriculum Goals to Story Content, Classroom Discussion, and the Ecology of Classroom and Community: Phase One. Instructional Resource No. 24.

    Tomlinson, Louise M.

    This instructional resource describes ways in which J. A. Banks' typology of the stages of ethnic identity development and related curriculum goals can be applied to literacy instruction. Banks' definitions of the stages of development and the curriculum goals for each stage are provided. Strategies for analyzing materials and developing relevant…

  15. The Use of the STAGS Finite Element Code in Stitched Structures Development

    Jegley, Dawn C.; Lovejoy, Andrew E.

    2014-01-01

    In the last 30 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft more fuel-efficient and more affordable. The focus on the airframe has been to reduce weight, improve damage tolerance and better understand structural behavior under realistic flight and ground loading conditions. Stitched structure is a technology that can address the weight savings, cost reduction, and damage tolerance goals, but only if it is supported by accurate analytical techniques. Development of stitched technology began in the 1990's as a partnership between NASA and Boeing (McDonnell Douglas at the time) under the Advanced Composites Technology Program and has continued under various titles and programs and into the Environmentally Responsible Aviation Project today. These programs contained development efforts involving manufacturing development, design, detailed analysis, and testing. Each phase of development, from coupons to large aircraft components was supported by detailed analysis to prove that the behavior of these structures was well-understood and predictable. The Structural Analysis of General Shells (STAGS) computer code was a critical tool used in the development of many stitched structures. As a key developer of STAGS, Charles Rankin's contribution to the programs was quite significant. Key features of STAGS used in these analyses and discussed in this paper include its accurate nonlinear and post-buckling capabilities, its ability to predict damage growth, and the use of Lagrange constraints and follower forces.

  16. Development of a design basis tornado and structural design criteria for the Nevada Test Site, Nevada. Final report

    McDonald, J.R.; Minor, J.E.; Mehta, K.C.

    1975-06-01

    In order to evaluate the ability of critical facilities at the Nevada Test Site to withstand the possible damaging effects of extreme winds and tornadoes, parameters for the effects of tornadoes and extreme winds and structural design criteria for the design and evaluation of structures were developed. The meteorological investigations conducted are summarized, and techniques used for developing the combined tornado and extreme wind risk model are discussed. The guidelines for structural design include methods for calculating pressure distributions on walls and roofs of structures and methods for accommodating impact loads from wind-driven missiles. Calculations for determining the design loads for an example structure are included

  17. Financial structure, financial development and banking fragility: International evidence

    Ruiz-Porras, Antonio

    2008-01-01

    We study the effects of financial structure and financial development on banking fragility. We develop our study by using fixed-effects panel-data regressions and by controlling the effects of certain banking indicators. We use individual and principal-components indicators of the activity, size and efficiency of intermediaries and markets. The indicators include data for 211 countries between 1990 and 2003. Our main findings suggest that banking stability is enhanced in market-based financia...

  18. Discussion Club "Profitable Heritage"

    Marina Tkacheva

    2017-09-01

    Full Text Available The authors and participants of the project and the expert community analyze the problems related to the realization of a big-scale concept of renovation of the historical center “Irkutsk Quarters”. They discuss preservation of wooden architecture of the city, changes in social functions of the territory, inclusion of the new facilities in the fabric of the area, as well as the problems of the territory’s tourist function and preservation of the identity of Irkutsk downtown.

  19. Development of a remote inspection robot for high pressure structures

    Lee, Jae C.; Kim, Jae H.; Choi, Yu R.; Moon, Soon S

    1999-10-01

    The high pressure structures in industrial plants must be periodically inspected for ensure their safety. Currently, the examination of them is manually performed by human inspectors, and there are many restrictions to examine the large containers which enclose dangerous chemicals or radioactive materials. We developed a remotely operated robot to examine these structures using recent mobile robot and computer technologies. Our robot has two magnetic caterpillars that make the robot can adhere to the structures made of steel like materials. The robot moves to the position for examination, and scans that position using ultrasonic probes equipped on it's arm, and transmits the result to the inspector according to his/her commands. Without building any auxiliary structures the robot can inspect the places where manual inspection can't reach. Therefore the robot can make shortening the inspection time as well as preventing the inspector from an accident. (author)

  20. Influence of ownership capital structure of Refinery's operation and development

    Hadzhi-Mishev, Dimitar

    1999-01-01

    Refineries are part of the energetic infrastructure of one country. Their significance is dependent on the geographic country position (whether it has sea exit or not), and on structure of primary energy spends in the country. According these facts, country's attitude to the refineries on its territory could be different. The possibility of ownership structure transformation in refineries and necessary legislation in the energetic sector of the state, needed for transformation realization are analyzed in this paper. Essential conditions for transformation fulfilling are protection 'mechanisms for domestic production in crude oil economy, manners of crude oil products price defining, and manners of excise determination and payment. As a function of these conditions, the conditions under which transformation of ownership structure in refineries is possible, as well as their influence on the operation and development of this part of energetic structure in transition country are defined in this paper. (Original)

  1. Development of a remote inspection robot for high pressure structures

    Lee, Jae C.; Kim, Jae H.; Choi, Yu R.; Moon, Soon S.

    1999-10-01

    The high pressure structures in industrial plants must be periodically inspected for ensure their safety. Currently, the examination of them is manually performed by human inspectors, and there are many restrictions to examine the large containers which enclose dangerous chemicals or radioactive materials. We developed a remotely operated robot to examine these structures using recent mobile robot and computer technologies. Our robot has two magnetic caterpillars that make the robot can adhere to the structures made of steel like materials. The robot moves to the position for examination, and scans that position using ultrasonic probes equipped on it's arm, and transmits the result to the inspector according to his/her commands. Without building any auxiliary structures the robot can inspect the places where manual inspection can't reach. Therefore the robot can make shortening the inspection time as well as preventing the inspector from an accident. (author)

  2. Development of Mechanical Structure Design Technology for LMR

    Lee, Jae Han; Joo, Young Sang; Lee, Hyeong Yeon

    2007-03-01

    Structural integrity and design simplifications were secured on reactor core support system, upper internal structure and core catcher of KALIMER-600. The evaluation on the suitability of high temperature and seismic design of reactor structures, and the structural integrity evaluation on reactor components and high temperature pipings are performed. The interfaces between the components and ISI accessibility are checked. Lightening of reactor building by 7%, the seismic design for 0.3g seismic loads and improvement of reactor structural design concept for KALIMER-600 have been carried out. Remote inspection technique using ultrasonic wave guide sensor was acquired as a visualization method for reactor internals under opaque sodium environments. The basic guideline on high temperature structure assessment as an assessment procedure on high temperature inelastic behaviour has been completed. In high temperature creep-fatigue test, totally 500 cycles (totally 700 hold time) were carried on cylindrical test and IHTS co-axial pipe test models. The behaviors of creep-fatigue damage and creep-fatigue crack behaviour were investigated, and the DB on the structural test were established. The seismic response tests on 19-sub assembly validation test model in air and in water were carried out, and its multi-purpose characteristics and reliability on the SAC-CORE3.0 code developed for core seismic response analysis were validated

  3. Old water structures. River Kullaa as an example: their history, present state and plans for development

    Koeykkae, S.; Siirala, M.

    1996-01-01

    The aim was to make an inventory of the structures and buildings relating to the history of the use of hydropower along the River Kullaa, which runs into the River Kokemaeki, and to determine how they could be conserved and used in future. Their history and the 1990-91 status will serve as starting points for a master scheme, local plans and plans for individual rapids. The publication first gives a general account of the history of the use of hydropower and the development of hydropower plants. Information has been collected on the establishment and development of structures along the River Kullaa. The 1990-91 status has been established on the basis of inventories and measurements made in the field. The master scheme first examines the River Kullaa and its structures as a whole. Along the river there are three areas, whose development is discussed in the local plans. Finally, plans for the individual rapids are presented for three sites. (author)

  4. Research and Development of Rapid Design Systems for Aerospace Structure

    Schaeffer, Harry G.

    1999-01-01

    This report describes the results of research activities associated with the development of rapid design systems for aerospace structures in support of the Intelligent Synthesis Environment (ISE). The specific subsystems investigated were the interface between model assembly and analysis; and, the high performance NASA GPS equation solver software system in the Windows NT environment on low cost high-performance PCs.

  5. Development of strongly coupled FSI technology involving thin walled structures

    Suliman, Ridhwaan

    2011-01-01

    Full Text Available A strongly coupled finite volume-finite element fluid-structure interaction (FSI) scheme is developed. Both an edge-based finite volume and Galerkin finite element scheme are implemented and evaluated for modelling the mechanics of solids...

  6. Structure and development of the saccular sensory epithelium in ...

    Structure and development of the saccular sensory epithelium in relation to otolith growth in the perch Perca fluviatilis (Telostei) ... Electron microscopy indicated: 1) The apical surface of each hair cell is covered with a ciliary bundle which varies in length in different epithelial regions. Each bundle is formed from a long ...

  7. Prefabricated elements and structures: Developments, tests and experiences

    Goltermann, Per

    2014-01-01

    Danish concrete structures are often built with prefabricated elements, joined together on the site and this provides a large challenge to constantly improve and optimize the elements, the joints and the models. DTU Byg has been active in the development, testing and modelling of new elements...

  8. Horticultural marketing channels in Kenya : structure and development

    Dijkstra, T.

    1997-01-01

    This study analyses the structure and development of horticultural marketing channels in Kenya. It is based primarily on a farm survey among some 500 farmers in Nyandarua, Kisii and Taita Taveta Districts and a trade survey of about 750 horticultural traders in 18 different market places.

  9. Compositional effects on the development of damage structures in accelerator

    Williams, T.M.

    A study of the development of dislocation structures in charged particle irradiated austenitic alloys has shown that the effects of irradiation and materials variables may be apparent at doses of the order approximately 1 dpa. Irradiation of identical specimens to much higher doses indicates that low and high dose behaviour are closely related

  10. Panel discussion: Nuclear cardiology

    Schwaiger, M.

    1991-01-01

    The panel discussion opened with a question concerning whether true quantification of myocardial sympathetic presynaptic function or receptor density can be obtained with currently available radiopharmaceuticals. What are the relative advantages of the two general approaches that have been proposed for quantification: (1) The assessment of tracer distribution volume in tissue following bolus injection and (2) quantification based on tracer displacement kinetics following administration of excess unlabeled tracer. It was pointed out that tracer kinetics for the delineation of presynaptic and postsynaptic binding sites by radiopharmaceuticals or radiolabeled receptor antagonists are rather complex, reflecting several physiologic processes that are difficult to separate. Several approaches were examined. The possibility of regional definition of receptor density by PET was questioned and it was noted that regions of interest can be applied to calculate regional receptor kinetics. However, due to the limited spatial resolution of PET, only average transmural values can be determined. The discussion then turned to the discrepancy between the known sparse parasympathetic innervation of the heart and the high density of muscarinic receptors observed with PET. Experiences with MIBG imaging were reported, including uptake in the transplanted heart and interaction of drugs with MIBG uptake

  11. Empowerment: a conceptual discussion.

    Tengland, Per-Anders

    2008-06-01

    The concept of 'empowerment' is used frequently in a number of professional areas, from psychotherapy to social work. But even if the same term is used, it is not always clear if the concept denotes the same goals or the same practice in these various fields. The purpose of this paper is to clarify the discussion and to find a plausible and useful definition of the concept that is suitable for work in various professions. Several suggestions are discussed in the paper, for example control over life or health, autonomy, ability, self-efficacy, self-esteem, and freedom, and it is concluded that there are two plausible complementary uses, one as a goal and one as a process or approach. Empowerment as a goal is to have control over the determinants of one's quality of life, and empowerment as a process is to create a professional relation where the client or community takes control over the change process, determining both the goals of this process and the means to use.

  12. Development of topologically structured membranes of aluminum oxide

    Bankova, A.; Videkov, V.; Tzaneva, B.

    2014-05-01

    In recent years, nanomembranes have become one of the most widely used construction material for ultrasensitive and ultrathin applications in micro-electromechanical systems (MEMS) and other sensor structures due to their remarkable mechanical properties. Among these, the mechanical stability is of particular importance. We present an approach to the analysis of the stability of nanostructured anodic aluminum oxide free membranes subjected to mechanical bending. The membranes tested were with a thickness of 500 nm to 15 urn in various topological shapes; we describe the technological schemes of their preparation. Bends were applied to membranes prepared by using a selective process of etching and anodizing. The results of the preparation of the membranes are discussed, together with the influence of the angle of deflection, and the number of bendings. The results obtained can be used in designing MEMS structures and sensors which use nanostructured anodic aluminum oxide.

  13. Development of topologically structured membranes of aluminum oxide

    Bankova, A; Videkov, V; Tzaneva, B

    2014-01-01

    In recent years, nanomembranes have become one of the most widely used construction material for ultrasensitive and ultrathin applications in micro-electromechanical systems (MEMS) and other sensor structures due to their remarkable mechanical properties. Among these, the mechanical stability is of particular importance. We present an approach to the analysis of the stability of nanostructured anodic aluminum oxide free membranes subjected to mechanical bending. The membranes tested were with a thickness of 500 nm to 15 urn in various topological shapes; we describe the technological schemes of their preparation. Bends were applied to membranes prepared by using a selective process of etching and anodizing. The results of the preparation of the membranes are discussed, together with the influence of the angle of deflection, and the number of bendings. The results obtained can be used in designing MEMS structures and sensors which use nanostructured anodic aluminum oxide.

  14. Women’s Ideas about the Health Effects of Household Air Pollution, Developed through Focus Group Discussions and Artwork in Southern Nepal

    Delan Devakumar; Zeshan Qureshi; Jenevieve Mannell; Manju Baruwal; Neha Sharma; Eva Rehfuess; Naomi M. Saville; Dharma S. Manandhar; David Osrin

    2018-01-01

    Household air pollution is a major cause of ill health, but few solutions have been effective to date. While many quantitative studies have been conducted, few have explored the lived experiences and perceptions of women who do the cooking, and as a result are those most exposed to household air pollution. In this study, we worked with groups of home cooks, and sought to use art as a means of engaging them in discussions of how household air pollution from cooking affects their lives. In the ...

  15. Discussion: European Commission policy

    Coldwell, R.

    1993-01-01

    This paper documents the debate which arose following two papers presented to a seminar run by the Centre for the Study of Regulated Industries, on 11th November 1992, on European Commission (EC) energy policies. The issues raised cover how an internal market for electricity and natural gas will be implemented under a proposed EC directive, bearing in mind the level of opposition from a number of Member States. How this Directive will apply to vertically integrated structures, such as Scottish Electricity Industry, is also considered. (UK)

  16. capital. A discussion paper

    Ewa Chojnacka

    2015-04-01

    Full Text Available The purpose of this study is to confront certain propositions presented in Lesław Niemczyk’s publication Rachunkowość finansowa aktywów kompetencyjnych i kapitału intelektualnego. Nowy dział rachunkowości(Accounting for Competence Assets and Intellectual Capital. A New Area in Accounting with ideas published in other studies. The authors discuss issues concerning firm value, selected definitions of intellectual capital, as well as certain methods of intellectual capital measurement and valuation. Other problems analysed include accounting for and reporting of intellectual capital and similarities and differences between the way those issues are presented in Polish and in international studies as well as in existing legal regulations and standards.

  17. Results and discussion

    1998-01-01

    The author deals with the experimental study of sorption, desorption and vertical migration of radionuclides in Sr-85 and Cs-137 in selected soil samples from around of NPP Bohunice and NPP Mochovce and other localities of the Slovakia. The influence of different materials [concurrent ions (K + , Ca 2+ , NH 4 + , pH), organic matter (peat) and zeolite, humidity] on kinetic of sorption and desorption of strontium and cesium as well as distribution coefficient (K D ) and transfer coefficients in followed samples of soils were followed. Obtained adsorption isotherm are presented and discussed. Using the Tessiere's sequential extraction analysis a gross variability in binding of radionuclides on soils was found. The obtained results were processed with the correlation analysis and the compartment model

  18. Observation of Online Communities: A Discussion of Online and Offline Observer Roles in Studying Development, Cooperation and Coordination in an Open Source Software Environment

    Sladjana V. Nørskov

    2011-09-01

    Full Text Available This paper addresses the application of observation to online settings with a special focus on observer roles. It draws on a study of online observation of a virtual community, i.e. an open source software (OSS community. The paper examines general and specific advantages and disadvantages of the observer roles in online settings by relating these roles to the same roles assumed in offline settings. The study suggests that under the right circumstances online and offline observation may benefit from being combined as they complement each other well. Quality issues and factors important to elicit trustworthy observational data from online study settings, such as OSS communities, are discussed. A proposition is made concerning how threats to credibility and transferability in relation to online observation (i.e. lack of richness and detail, risk of misunderstandings can be diminished, while maintaining the level of dependability (which is potentially high due to a greater degree of anonymity and "isolation" in online settings. The paper thus suggests that the less participative the researcher's online observer role is, the more s/he should consider introducing offline data collection techniques rather than adopting a more participative role in the observed online setting. This methodological discussion forms the basis for making a well-considered choice of online observer role rather than passively sliding into a role assigned by the setting. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs110358

  19. Development of SC structure modularization in Nuclear Power Plant

    Mun, Taeyoup [Korea Hydro and Nuclear Power Co., Ltd., Seoul (Korea, Republic of)

    2008-04-15

    New Focus on NPP are Rising Concerns on Global Warming, Potential energy crisis (geo-political), Improved reliability and safety of nuclear power plant, Advent of Generation 3+ NPP technology and Economical Energy Resource. New NPPs are 6 units in Korea and 23 in Asia being built, 32 units being planned in China by 2020 (150 by 2050), 10 units being planned in US by 2020 and IAEA expects $200 billions on NPP construction next 25 years (up to 30% of total world energy). {open_square} SC(Steel Plate Concrete) structure {center_dot} Steel Plate is used as a Structural Element instead of Reinforcing Bars in RC {center_dot} SC structure consists of Steel Plate with Headed Studs. Connected by Tie-bars - The Primary Purpose of Tie-bars is to Stiffen and Hold Together the Plates during Construction Process - Headed Studs are Welded to the Inside of Steel Plate for composite action {open_square} Benefits of SC Structure {center_dot} Shorten Construction Duration for Re bar, Forming and Scaffolding Works {center_dot} Minimize Site Labors {center_dot} Improve the Construction Quality {center_dot} Enable Construction Sites to be kept Clean {open_square} SC Modularization {center_dot} Fit for Modular Construction for Structural Features {center_dot} Fit for Modular Construction for Structural Features {center_dot} Inattentively Effective for Integrated Modules {center_dot} Pre-fabrication, Pre-assembly and Modularization {open_square} Project Overview {center_dot} Project Name: Development of SC structure for Modularization in NPP {center_dot} Project Type: Electric Power Industry R and D (Ministry of Knowledge Economy) {center_dot} Duration: Sep. 2005 {approx} Aug. 2008 (36 Months) {center_dot} Research Team and Scopes - Project Management: Korea Hydro and Nuclear Power Company (KHNP) - Development of Code and Standards for SC Structure: Korea Society of Steel Construction (KSSC) Korea Electric Power Research Institute (KEPRI) - Development of SC Structural Analysis and Design

  20. Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

    Pai, Shantaram S.; Nagpal, Vinod K.

    2007-01-01

    An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

  1. Development of magnetostrictive active members for control of space structures

    Johnson, Bruce G.; Avakian, Kevin M.; Fenn, Ralph C.; Gaffney, Monique S.; Gerver, Michael J.; Hawkey, Timothy J.; Boudreau, Donald J.

    1992-08-01

    The goal of this Phase 2 Small Business Innovative Research (SBIR) project was to determine the technical feasibility of developing magnetostrictive active members for use as truss elements in space structures. Active members control elastic vibrations of truss-based space structures and integrate the functions of truss structure element, actively controlled actuator, and sensor. The active members must control structural motion to the sub-micron level and, for many proposed space applications, work at cryogenic temperatures. Under this program both room temperature and cryogenic temperature magnetostrictive active members were designed, fabricated, and tested. The results of these performance tests indicated that room temperature magnetostrictive actuators feature higher strain, stiffness, and force capability with lower amplifier requirements than similarly sized piezoelectric or electrostrictive active members, at the cost of higher mass. Two different cryogenic temperature magnetostrictive materials were tested at liquid nitrogen temperatures, both with larger strain capability than the room temperature magnetostrictive materials. The cryogenic active member development included the design and fabrication of a cryostat that allows operation of the cryogenic active member in a space structure testbed.

  2. Discussion groups with parents of children with cerebral palsy in Europe designed to assist development of a relevant measure of environment

    McManus, V; Michelsen, S I; Parkinson, K

    2006-01-01

    BACKGROUND: An instrument to measure environmental factors relevant to physically impaired children is being developed in a European context. Preliminary work in England had identified some potentially important themes. Further inquiry was needed to identify issues important in other European...

  3. Development of human brain structural networks through infancy and childhood.

    Huang, Hao; Shu, Ni; Mishra, Virendra; Jeon, Tina; Chalak, Lina; Wang, Zhiyue J; Rollins, Nancy; Gong, Gaolang; Cheng, Hua; Peng, Yun; Dong, Qi; He, Yong

    2015-05-01

    During human brain development through infancy and childhood, microstructural and macrostructural changes take place to reshape the brain's structural networks and better adapt them to sophisticated functional and cognitive requirements. However, structural topological configuration of the human brain during this specific development period is not well understood. In this study, diffusion magnetic resonance image (dMRI) of 25 neonates, 13 toddlers, and 25 preadolescents were acquired to characterize network dynamics at these 3 landmark cross-sectional ages during early childhood. dMRI tractography was used to construct human brain structural networks, and the underlying topological properties were quantified by graph-theory approaches. Modular organization and small-world attributes are evident at birth with several important topological metrics increasing monotonically during development. Most significant increases of regional nodes occur in the posterior cingulate cortex, which plays a pivotal role in the functional default mode network. Positive correlations exist between nodal efficiencies and fractional anisotropy of the white matter traced from these nodes, while correlation slopes vary among the brain regions. These results reveal substantial topological reorganization of human brain structural networks through infancy and childhood, which is likely to be the outcome of both heterogeneous strengthening of the major white matter tracts and pruning of other axonal fibers. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  4. Development of Human Brain Structural Networks Through Infancy and Childhood

    Huang, Hao; Shu, Ni; Mishra, Virendra; Jeon, Tina; Chalak, Lina; Wang, Zhiyue J.; Rollins, Nancy; Gong, Gaolang; Cheng, Hua; Peng, Yun; Dong, Qi; He, Yong

    2015-01-01

    During human brain development through infancy and childhood, microstructural and macrostructural changes take place to reshape the brain's structural networks and better adapt them to sophisticated functional and cognitive requirements. However, structural topological configuration of the human brain during this specific development period is not well understood. In this study, diffusion magnetic resonance image (dMRI) of 25 neonates, 13 toddlers, and 25 preadolescents were acquired to characterize network dynamics at these 3 landmark cross-sectional ages during early childhood. dMRI tractography was used to construct human brain structural networks, and the underlying topological properties were quantified by graph-theory approaches. Modular organization and small-world attributes are evident at birth with several important topological metrics increasing monotonically during development. Most significant increases of regional nodes occur in the posterior cingulate cortex, which plays a pivotal role in the functional default mode network. Positive correlations exist between nodal efficiencies and fractional anisotropy of the white matter traced from these nodes, while correlation slopes vary among the brain regions. These results reveal substantial topological reorganization of human brain structural networks through infancy and childhood, which is likely to be the outcome of both heterogeneous strengthening of the major white matter tracts and pruning of other axonal fibers. PMID:24335033

  5. Regional Institutional Structure in the Context of Innovative Industry Development

    Anastasia Y. Nikitaeva

    2017-03-01

    Full Text Available The paper proves that successful innovation-oriented development of the industrial complex of the region can be ensured through the creation of adequate institutional structure. As a theoretical and conceptual platform for this task the use of regional institutionalism is suggested. It is reasoned that integration component plays an important role in providing of the innovative development of the industry in modern economic realities and the potential effects of integration on meso- and micro-levels of economy are provided. Integration of industrial structures potential at the same time assumes expansion of a partner segment of the entities relations in the market environment on the basis of network, cluster, and integration approaches convergence to management in the industrial development. On the basis of the international experience analysis it is illustrated that forming of multichannel partnership of actors in the industrial sphere with a vector on an innovatization requires creation of the corresponding institutional conditions. It is established that the main objectives of the relevant institutes consist in legitimization of various forms and technologies of partnership and stimulation of economic entities interactions. The first problem is solved by means of legal support of integration and partners’ interactions, the second one - with the use of a program and project approach. The basic structural elements and functional areas of regional institutional structure in the context of innovative industry development are determined. It is shown that the institutions of the partnership and monitoring of the obligations implementation by integration formations participants can have formal and informal nature, at the same time the trust institution is especially important. In work significant influence of regional specifics on institutional structure and integration of economic entities is proved.

  6. Pain management discussion forum.

    Breivik, Harald

    2013-08-01

    A 23-year-old hemophilia patient with severe pain from bleeding into his joints who developed problematic opioid use is described. The potential value of methadone in such a patient is described, as are the risks of drug interactions leading to toxicity and cardiac arrhythmias.

  7. Regional cholera response discussion

    Funke, Nicola S

    2009-09-30

    Full Text Available people in SADC be protected from 29 being exploited in research participation? People in Africa are often used as guinea pigs for drug testing, with the drugs subsequently being exported to developed countries. There is a need for benefit...

  8. Final plenary discussion

    Federline, M.

    2004-01-01

    Rapporteur, chose to highlight other themes and issues from the seminar that appeared to be: - important for successful D and D; - worth further work in an international context; - controversial and worthy of further debate. The five main themes selected were as follows: - stakeholder involvement and communication; - strategy selection; - waste management and clearance; - funding and costs; - satisfying social demands. Various issues were identified under each one of these five themes and, in order to make best use of the time available for discussion, participants were invited to vote on the issues of most importance to them. Subsequent discussion was then focussed on the issues so identified. (author)

  9. Development of the simulation package 'ELSES' for extra-large-scale electronic structure calculation

    Hoshi, T; Fujiwara, T

    2009-01-01

    An early-stage version of the simulation package 'ELSES' (extra-large-scale electronic structure calculation) is developed for simulating the electronic structure and dynamics of large systems, particularly nanometer-scale and ten-nanometer-scale systems (see www.elses.jp). Input and output files are written in the extensible markup language (XML) style for general users. Related pre-/post-simulation tools are also available. A practical workflow and an example are described. A test calculation for the GaAs bulk system is shown, to demonstrate that the present code can handle systems with more than one atom species. Several future aspects are also discussed.

  10. The Role of L.S. Vygotsky's Ideas in the Development of Social Cognition Paradigm in Modern Psychology: A Review of Foreign Research and Discussion on Perspectives

    A.B. Kholmogorova

    2015-10-01

    Full Text Available The author reflects on the reasons for the increased interest of modern foreign social cognition researchers in L.S. Vygotsky's cultural-historical theory in the light of the existing methodological contradictions and recent empirical data. The paper analyzes the main ideas and concepts of cultural-historical theory that were incorporated in research by Vygotsky's foreign followers, including such prominent experts in the field of social cognition as M. Tomasello and Ch. Fernyhough. It describes the conceptual apparatus and models of development of social cognition in phylo-, anthropo- and ontogenesis proposed by these researchers basing on the ideas of cultural-historical approach. The author especially stresses the importance of the idea of the dialogical nature of human thinking as the foundation for social cognition development in ontogenesis. Also reviewed are the mechanisms underlying the emergence of dialogical thinking from egocentric speech that are described in Ch. Fernyhough's model of social cognition development in ontogenesis. The paper concludes with an analysis of the concepts of cultural-historical theory and its current developments by Russian researchers that are of high heuristic potential for the future development of the paradigm of social cognition

  11. Financial Development, Financial Structure, and Macroeconomic Volatility: Evidence from China

    Feng Wei

    2016-11-01

    Full Text Available Using annual data from 1997–2014 of 30 provinces, municipalities, and autonomous regions, subdividing trended and cyclical volatility of macroeconomics and inflation, considering different indicators of financial development and financial structure, this paper investigated the impact of financial development and financial structure on macroeconomic volatility. The empirical results found that (1 the trended and cyclical volatility of the previous macroeconomic period had a significantly positive impact on that of the current period, and the impact of trended volatility was greater than that of cyclical volatility; (2 financial development had a significantly negative impact on macroeconomic cyclical volatility through inflation cyclical volatility, but inflation trended volatility would amplify macroeconomic volatility; financial markets have no significant effect on macroeconomic volatility; financial structure measured with the ratio of stock market turnover and the efficiency of the financial development had a significant positive impact on macroeconomic cyclical volatility; and (3 inflation trended volatility had a significantly negative impact on macroeconomic cyclical volatility and trended volatility, while inflation cyclical volatility had a significantly positive impact on macroeconomic cyclical volatility.

  12. Structural challenges in the development of a truck shipping cask for the OCRWM Cask Systems Development Program

    Mello, R.M.; Severson, W.J.; Nair, B.R.

    1990-01-01

    The development of a spent fuel transportation cask design based on a structural material without licensing precedent presents many challenges. The US Nuclear Regulatory Commission (NRC) requires that any new material be qualified to meet the design and fabrication requirements of the ASME Boiler ampersand Pressure Vessel Code, Section III, Class 1. This paper discusses the strategy that is being implemented towards obtaining Code acceptance of a titanium alloy (3A1-2.5V). This alloy has been chosen as the principal structural material for a Legal Weight Truck cask being developed by Westinghouse for the US Department of Energy. The analysis approach used on some of the principal cask components is also presented. 5 refs., 8 figs., 3 tabs

  13. Structural challenges in the development of a truck shipping cask for the OCRWM cask systems development program

    Mello, R.M.; Severson, W.J.; Nair, B.R.

    1990-01-01

    The development of a spent fuel transportation cask design based on a structural material without licensing precedent presents many challenges. The U.S. Nuclear Regulatory Commission (NRC) requires that any new material be qualified to meet the design and fabrication requirements of the ASME Boiler and Pressure Vessel Code, Section III, Class 1. This paper discusses the strategy that is being implemented towards obtaining Code Acceptance of a titanium alloy (3A1-2.5V). This alloy has been chosen as the principal structural material for a Legal Weight Truck cask being developed by Westinghouse for the U.S. Department of Energy. The analysis approach used on some of the principal cask components is also presented

  14. Development of structural materials on the base of new technology

    Belov, A.F.; Anoshkin, N.F.

    1982-01-01

    Some results are considered and possibilities which discovered in development of structural materials connected with development of such new technological processes as skull melting of titanium alloys, granule metallurgy, hot isostatic, diffusion welding are estimated. The method of skull melting with remelted skull is developed. The method assures sufficient possibilities for dissolving of high-heat components of charge and obtaining homogeneous ingots of series of new alloys. Granule metallurgy based on crystallization of the metal with high rate in the form of small (up to 300 μkm) particles and subsequent consolidation of them into compact billet discoveres a wide possibilities of creation of new structural material with more high operation indexes. It is noted that developed processes of granule production, their treatment, compacting and thermal treatment of the billets assure production of metal of high quality, satisfied the strong requirements of present standards. The process of hot isostatic pressing at which the workable metal is subjected to through uniform pressure by compressed gas after heating or semultaneously with its heating up to the temperatures of working in gasostats is one of new technological processes. A certain experience of the HIP use for production of compact billets from granules for diffusion welding of the billets is accumulated. This process has a great possibilities for densification of shaped castings. Investigation and application of the diffusion welding represent combination of elements into details of complex form in vacuum at the temperatures low of melting point under effect of small pressures are investigated both in our country and abroad. Diffusion welding gives a wide possibilities in the development of materials with higher properties at the expence of production of products of large dimensions from thin elements with fine-grained structure as well as products with assigned gradient of chemical composition, structure

  15. Panel discussion. Session 1

    Rodgers, B.R.

    1986-01-01

    An attempt is made to identify problems that need research and development work in order to advance low-level radioactive waste technology and to put the industry in a better position in five to ten years, or even twenty-five years from now. Attention is focused on disposal methods, operating procedures, the effects of the establishment of the state compact, and de minimis criteria

  16. High Field Studies for CLIC Accelerating Structures Development

    Profatilova, I

    2017-01-01

    Compact Linear Collider RF structures need to be able to achieve the very high average accelerating gradient of 100 MV/m. One of the main challenges in reaching such high accelerating gradients is to avoid vacuum electrical breakdown within CLIC accelerating structures. Accelerating structure tests are carried out in the klystron-based test stands known as the XBoxes. In order to investigate vacuum breakdown phenomena and its statistical characteristics in a simpler system and get results in a faster way, pulsed dc systems have been developed at CERN. To acquire sufficient breakdown data in a reasonable period of time, high repetition rate pulse generators are used in the systems for breakdown studies, so-called pulsed dc system. This paper describes the pulsed dc systems and the two high repetition rate circuits, which produce high-voltage pulses for it, available at CERN.

  17. DEVELOPMENT OF THE STRUCTURAL MATRIX APPROACH IN ORGANIZATIONAL DIAGNOSTICS

    Mishlanova Marina Yur'evna

    2012-07-01

    The proposed approach discloses private constituents of elements, communications, organizational layers, generalized characteristics of layers, and partial effects. This approach may be used to simulate a system of forces, items of pressure, and organizational problems. The most advanced state of stability and sustainable development is now provided with the structure within which the elements remain in certain natural interdependence (symmetry, or balance. Formation of this model is based on thorough diagnostics of an organization through the employment of the structural matrix approach and the audit of the following characteristics: labour efficiency, reliability and flexibility of communications, uniformity of distribution of communications and their coordination, connectivity of elements and layers with account for their impact, degree of freedom of elements, layers and the system as a whole, reliability, rigidity, adaptability, stability of the organizational structure.

  18. Raising Job Quality and Skills for American Workers: Creating More-Effective Education and Workforce Development Systems in the States. Discussion Paper 2011-10

    Holzer, Harry J.

    2011-01-01

    To improve the employment rates and earnings of Americans workers, we need to create more-coherent and more-effective education and workforce development systems, focusing primarily (though not exclusively) on disadvantaged youth and adults, and with education and training more clearly targeted towards firms and sectors that provide good-paying…

  19. Does It Matter if Preschool Children and Mothers Discuss Positive vs. Negative Events during Reminiscing? Links with Mother-Reported Attachment, Family Emotional Climate, and Socioemotional Development

    Laible, Deborah

    2011-01-01

    The purpose of the study was to examine the differential relations between mother-child reminiscing about a positive emotional event vs. a negative emotional event and attachment security, family climate, and young children's socioemotional development. Fifty preschool children (M age = 50.69 months, SD = 4.64) and their mothers completed two…

  20. Rejoinder: A Further Discussion of Job Analysis and Use of KSAs in Developing Licensure and Certification Examinations--A Response to LaDuca

    Wang, Ning; Witt, Elizabeth A.; Schnipke, Deborah

    2006-01-01

    "In his commentary to our paper on the use of knowledge, skill, and ability statements in developing credentialing examinations (Wang, Schnipke, & Witt, 2005 )," Dr. LaDuca set forth his concerns while commending our paper for providing helpful insights into the importance of careful delineation of KSAs. We believe that there is little substantive…

  1. Reinforced concrete structures under impact and impulsive loading: recent development, problems and trends

    Plauk, G.; Herter, J.

    1984-01-01

    Nuclear plant facilities and other reinforced concrete structures have to be regarded as to their safety in design and construction with respect to impact and impulsive loading in order to avoid serious damage to mankind and environment. The paper gives a survey on theoretical and experimental developments currently in progress, in particular regarding airplane crash. Some new results arising out of several research programs relevant to particular problems of impact loading have been reviewed and are presented. Experimental investigation for determination of material properties of plain concrete, reinforcing steel as well as steel-concrete bond under high strain-rates are treated in this paper including theoretical approaches for the respective material laws. An outline of soft missile impact tests performed on structural members, e.g. beams and plates, to determine the load deformation or fracture behaviour is given. Furthermore, numerical models and calculations to analyse structural components and structures under impact loading were discussed. (Author) [pt

  2. DISCUSSION METHODS: MODIFICATION AND TRANSFORMATION

    A A Abbasova

    2015-12-01

    Full Text Available The article is devoted to the importance of selecting the optimal methods of stimulation and motivation for learning. In modern conditions it is very important that the teacher did not give the students ready knowledge, but pointed out the way for the acquisition of knowledge, taught them to gain knowledge. This demands from the philologist the choice of effective forms of working with texts of different types and styles of speech, listening, speaking. In this connection a special attention should be paid to the lessons of speech development. There is a special group of methods to stimulate the development of communicative competence. Among them, the method of discussion, which is increasingly being used during the Russian language lessons. The specificity of using this method in class for teaching Russian as a foreign language, its basic functions (teaching, developing, educating are considered. The key rules for conducting a discussion at the Russian language classes, the main and additional functions-roles of the teacher, the participants, the minute-taker are analyzed. The advantages of the discussion in Russian in comparison to the discussion in the students’ native language are summarized.

  3. Discussion on Papers 8 - 10

    Walker, R.; Wilson, E.A.; Gibson, P.

    1992-01-01

    Questions raised in the discussion are reported. These concerned: the Treasury discount rate for the construction of such a project; the CO 2 benefits of tidal schemes in developing countries; the criteria for deciding the total installed capacity of the scheme; the Government review of the cost-benefit analysis; the benefit arising from the elimination of nitrogen and sulphur oxides; security of supply; carbon tax projections. The only response reported is on the question of criteria for deciding the total installed capacity. Separate abstracts have been prepared on the three papers under discussion. (UK)

  4. Research, development and application of noncombustible Beta fiber structures. [for Apollo

    Dillon, J. J.; Cobb, E. S.

    1975-01-01

    Beta fiber was selected as the primary material for flexible fibrous structures used in spacecraft and crew systems applications in the Apollo program because it was noncombustible in a 100 percent oxygen atmosphere up to 16.5 psia. It met NASA criteria for outgassing, toxicity, odor, and crew comfort, and possessed sufficient durability to last through the mission. Topics discussed include: study of spacecraft applications; design of Beta fiber textile structures to meet the requirements; selection of surface treatments (finishes, coatings, and printing systems) to impart the required durability and special functional use to the textile structures; development of sewing and fabrication techniques; and testing and evaluation programs, and development of production sources.

  5. Development of expert system for structural design of FBR components

    Ueda, Hiroyoshi; Uno, Masayoshi; Ogawa, Hiroshi; Shimakawa, Takashi; Yoshimura, Shinobu; Yagawa, Genki.

    1995-01-01

    The characteristics of structural design processes for nuclear components can be summarized as follows : (1) Many engineers belonging to different fields are working in parallel, exchanging a huge amount of data and information. (2) A final solution is determined after a number of iterative design processes. (3) Solutions have to be examined many times based on sophisticated design codes. (4) Sophisticated calculation methods such as the finite element method are frequently utilized, and experts' knowledge on such analyses plays important roles in the design process. Taking these issues into consideration, a new expert system for structural design is developed in the present study. Here, the object-oriented data flow mechanism and the blackboard model are utilized to systematize structural design processes in a computer. An automated finite element calculation module is implemented, and experts' knowledge is stored in knowledge base. In addition, a new algorithm is employed to automatically draw the design window, which is defined as an area of permissible solutions in a design parameter space. The developed system is successfully applied to obtain the design windows of four components selected from the demonstration FBR structures. (author)

  6. Development of structural technology for a high performance spacer grid

    Song, Kee Nam; Kim, H. K.; Kang, H. S.

    2003-03-01

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 14 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates six are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models

  7. DEVELOPMENT OF STRUCTURES FROM SOLID WOOD FOR OBJECTS OF INFRASTRUCTURE

    Konstantin P. Pyatikrestovsky

    2018-03-01

    Full Text Available New prefabricated lightweight structures made of solid wood with connections for joining and building metal screws for wood are proposed. Manufacture and assembly of basic elements-bars with a cross-section of 15x15 cm can be carried out in line conditions on the simplest woodworking equipment. The use of local tim-ber material has a number of advantages (ecological, economic and operational. The description of structures with manufacturing process, examples of buildings with vaulted and hipped roofing, connection arrangement, preparation of experimental samples with the use of new equipment of the National Research Moscow State University of Civil Engineering are given. The method of analysis with allowance for plastic deformations is under consideration. It provides additional economic advantages. The analysis is carried out by the method of integral estimates developed by Prof. V.M. Bondarenko for reinforced concrete structures and adapted to wooden structures by Prof. K.P. Pyatikrestovsky. Special strength criteria are used for the analysis of decks working together with the ribs (in a combined stressed state. It is planned to build buildings for various purposes in the ar-eas of development of the Far North of Russia.

  8. Development of children’s early understanding of numeric structure

    Vasilyeva, Marina

    2016-09-01

    Full Text Available Understanding of the base-10 structure of multi-digit numbers is one of the critical aspects in early mathematics learning. It has been documented that children from different countries vary in their use of base-10 representations. Questions concerning potential sources of this variability have been debated for decades. One commonly posited explanation is that some languages provide explicit cues about the structure of multi-digit numbers, facilitating the development of base-10 representations. In the present study, we tested this view against an alternative view, positing that variability in children’s learning of numeric structure may reflect differences in their experiences with numbers. The study examined kindergartners and first-graders from four countries: Taiwan, South Korea, the USA, and Russia. Results showed that the use of base-10 representations by American first-graders increased dramatically over the last decades, following changes in curricular guidelines. First-graders across the four countries showed some differences in performance (however, not consistent with the language account, whereas kindergartners performed comparably despite the differences in their languages. The results suggest that the nature of early math instruction may be critical for children’s developing understanding of numeric structure.

  9. Discussion on the development of domestic direct drinking water industry%谈我国直饮水行业的发展

    李鹏

    2014-01-01

    The thesis introduces direct drinking water from various aspects. Starting from the definition of direct drinking water,it mainly de-scribes it development history,current water quality criteria,water supply methods,water quality treatment and producing procedures,and points out the wide development prospect of direct drinking water in China.%对直饮水进行了较全方位的介绍,并从直饮水的定义出发,主要对直饮水的发展历程、现行的水质标准、供水方式、水质处理、生产工艺流程等问题进行了阐述,同时指出直饮水在国内具有广阔的发展前景。

  10. Development of Stitched Composite Structure for Advanced Aircraft

    Jegley, Dawn; Przekop, Adam; Rouse, Marshall; Lovejoy, Andrew; Velicki, Alex; Linton, Kim; Wu, Hsi-Yung; Baraja, Jaime; Thrash, Patrick; Hoffman, Krishna

    2015-01-01

    NASA has created the Environmentally Responsible Aviation Project to develop technologies which will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations. NASA and The Boeing Company are working together to develop a structural concept that is lightweight and an advancement beyond state-of-the-art composites. The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is an integrally stiffened panel design where elements are stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. With the PRSEUS concept, through-the-thickness stitches are applied through dry fabric prior to resin infusion, and replace fasteners throughout each integral panel. Through-the-thickness reinforcement at discontinuities, such as along flange edges, has been shown to suppress delamination and turn cracks, which expands the design space and leads to lighter designs. The pultruded rod provides stiffening away from the more vulnerable skin surface and improves bending stiffness. A series of building blocks were evaluated to explore the fundamental assumptions related to the capability and advantages of PRSEUS panels. These building blocks addressed tension, compression, and pressure loading conditions. The emphasis of the development work has been to assess the loading capability, damage arrestment features, repairability, post-buckling behavior, and response of PRSEUS flat panels to out-of plane pressure loading. The results of this building-block program from coupons through an 80%-scale pressure box have demonstrated the viability of a PRSEUS center body for the Hybrid Wing Body (HWB) transport aircraft. This development program shows that the PRSEUS benefits are also applicable to traditional tube-andwing aircraft, those of advanced configurations, and other

  11. Structural change in developing countries: has it decreased gender inequality?

    Michelle Rendall

    2012-01-01

    This paper examines the evolution of female labor market outcomes from 1987 to 2008 by assessing the role of changing labor demand requirements in four developing countries: Brazil, Mexico, India and Thailand. The results highlight the importance of structural change in reducing gender disparities by decreasing the labor demand for physical attributes. The results show that India, the country with the greatest physical labor requirements, exhibits the largest labor market gender inequality. I...

  12. Development of a Simple Structured Artificial Muscle Using SMA Wire

    Ibuki, Ryuta; Maruyama, Shigenao; Komiya, Atsuki

    2006-01-01

    Artificial heart muscle using SMA wire is developed to assist weaken heartbeat. Simple structure design was adopted for large output force, large displacement and rapid cyclic motion of the actuator. The actuator was designed and fabricated from the viewpoint of heat transfer. Moving performance of the actuator was experimentally measured under 10N of loading condition. Under the maximum efficiency condition, the actuator shows cyclic motion with 1mm of displacement and time period of about 2 seconds in one cycle

  13. CURRENT TRENDS FOR DEVELOPMENT AND IMPROVEMENT OF THE ORGANIZATIONAL STRUCTURES IN MANAGEMENT

    Angel Doraliyski

    2017-03-01

    Full Text Available One of the key components of the management system is the organizational structure of management. This report presents the current trends of development and improvement of organizational structures of management. The semantics of the term "organizational structure" used in the report is clarified. Key aspects of structural policy of organizations are discussed, as well as the introduction of flexible organizational forms. The main directions for analysis of organizational policy of organizations are also mentioned. It is stressed that the analysis of current trends for the future development of organizational structures of management should be an integral component of the management policy of every organization. The trends are flexibility and adaptability of the organizational structure, rational proportion between centralization and decentralization, an appropriate balance between the rights, duties and responsibilities, reducing regulations, rules and other normative documents. A recommendetaion is made that organizational governance structures must be adapted constantly in accordance with changes in the overall management system, as they are one of its main components.

  14. Women’s Ideas about the Health Effects of Household Air Pollution, Developed through Focus Group Discussions and Artwork in Southern Nepal

    Delan Devakumar

    2018-02-01

    Full Text Available Household air pollution is a major cause of ill health, but few solutions have been effective to date. While many quantitative studies have been conducted, few have explored the lived experiences and perceptions of women who do the cooking, and as a result are those most exposed to household air pollution. In this study, we worked with groups of home cooks, and sought to use art as a means of engaging them in discussions of how household air pollution from cooking affects their lives. In the Terai district of southern Nepal, we held four focus groups that included 26 local women from urban and peri-urban areas, as well as six local artists. The women then met approximately weekly over four months, and produced images related to air pollution. Transcripts from the focus groups were reviewed independently by two authors, who initially categorised data deductively to pre-defined nodes, and subsequently inductively reviewed emergent themes. Women identified a number of health effects from air pollution. The main physical effects related to the eye and the respiratory system, and women and young children were seen as most vulnerable. The psychosocial effects of air pollution included reduced food intake by women and lethargy. Suggested solutions included modifications to the cooking process, changing the location of stoves, and increasing ventilation. The main barriers were financial. The lived experiences of women in southern Nepal around the problem of air pollution offers a more nuanced and context-specific understanding of the perceptions and challenges of addressing air pollution, which can be used to inform future interventions.

  15. Women’s Ideas about the Health Effects of Household Air Pollution, Developed through Focus Group Discussions and Artwork in Southern Nepal

    Qureshi, Zeshan; Mannell, Jenevieve; Baruwal, Manju; Sharma, Neha; Rehfuess, Eva; Manandhar, Dharma S.; Osrin, David

    2018-01-01

    Household air pollution is a major cause of ill health, but few solutions have been effective to date. While many quantitative studies have been conducted, few have explored the lived experiences and perceptions of women who do the cooking, and as a result are those most exposed to household air pollution. In this study, we worked with groups of home cooks, and sought to use art as a means of engaging them in discussions of how household air pollution from cooking affects their lives. In the Terai district of southern Nepal, we held four focus groups that included 26 local women from urban and peri-urban areas, as well as six local artists. The women then met approximately weekly over four months, and produced images related to air pollution. Transcripts from the focus groups were reviewed independently by two authors, who initially categorised data deductively to pre-defined nodes, and subsequently inductively reviewed emergent themes. Women identified a number of health effects from air pollution. The main physical effects related to the eye and the respiratory system, and women and young children were seen as most vulnerable. The psychosocial effects of air pollution included reduced food intake by women and lethargy. Suggested solutions included modifications to the cooking process, changing the location of stoves, and increasing ventilation. The main barriers were financial. The lived experiences of women in southern Nepal around the problem of air pollution offers a more nuanced and context-specific understanding of the perceptions and challenges of addressing air pollution, which can be used to inform future interventions. PMID:29389909

  16. A few discussion on expert system development for electrical power systems-optimization of an inverter-motor of a railway traction chain

    Fezzani, D.; Piquet, H.; Foch, H.

    1998-01-01

    This paper deals with the automatic design of static converters and electrical machines. Facing the multitude of such devices (converters-machines), the choice of the appropriate converter or machine is a delicate problem. A high level of expertise is required to determine the best structure for the considered application. This choice could be rapidly made if one had a system which incorporates a great knowledge of converters, machines and control methods. Firstly, the authors review the realized studies, then they propose this methodology for a concrete case in order to optimize an inverter-motor of a railway traction chain. Constraints are described in terms of input and output performances (losses, current,..). These data are analyzed by using design rules and methods which allow the decrease of the manufacture cost of the inverter-motor. Rules and methods are implemented on a workstation by means of an ''expert system shell'' SMECI. The article proposes several tracks which involve organization, methodology, confirmation and implementation of a tool supporting a method. This process of implementation is the most efficient to fit into a constant process of improvement which is supported by the return on experience and by the evolution of the state of the art. (orig.)

  17. 企业持续发展的绩效管理探讨%Discussion about the performance management of the enterprise sustainable development

    何花

    2013-01-01

    The consistency of performance management on organizational and individual goals,through the realization of organizational performance to improve individual performance,is of great significance to the sustainable development of enterprises. Job analysis is the foundation of performance management,job analysis is the result of the implementation of performance management basis;perfor-mance appraisal is a process of performance management,scientific performance evaluation is an important method for the advanced enterprise management;human resource is an important resource for the sustainable development of the enterprise,the effective per-formance management can avoid excessive loss of talent.%绩效管理注重组织目标和个人目标的一致性,通过提升个人绩效实现组织绩效的提高,对企业可持续发展具有重要意义。工作分析是绩效管理的基础,工作分析结果是实施绩效管理的依据;绩效考核是绩效管理的一个环节,科学的绩效考核是企业先进管理的重要手段;人力资源是企业持续发展的重要资源,有效的绩效管理可避免人才过度流失。

  18. 风电场分期开发中存在问题的探讨%Discussion on the Problem of Wind Farm Phased Development

    彭秀芳; 李剑锋

    2013-01-01

      风电场分期开发中,风电场风能资源分布和场址区域开发顺序直接影响风电场装机容量和风电场发电量。本文通过分析具体工程实例,提出如何准确评估分期开发场址的风能资源。同时,对风电场不同区域的开发顺序也进行了探讨,不同区域的开发顺序对风电场尾流和发电量都有一定的影响,进而影响风电场的整体装机容量。%On the phased development of wind farm, the installed capacity and generated energy of wind farms are influenced by the wind energy distribution and the development order. Taking the engineer project as an example, the paper pointed out how to evaluate wind energy and analyzed the order of different areas which could affect the wake loss and generated energy . And then it could affect the installed capacity.

  19. MOTOR STRUCTURE AND BASIC MOVEMENT COMPETENCES IN EARLY CHILD DEVELOPMENT

    Rado Pišot

    2010-12-01

    Full Text Available Motor development consists of dynamic and continuous development in motor behaviour and is reflected in motor competences (on the locomotive, manipulative and postural level and motor abilities (coordination, strength, speed, balance, flexibility, precision and endurance. This is a complex process in which a child acquires motor abilities and knowledge in interaction with inherited and environmental factors. A sample of 603 boys and girls, of which 263 were aged five (age deviation +/- 3 days; 18,5 ± 3,1kg body weight; 109,4 ± 4,3 cm body height and 340 were aged six and a half (age deviation +/- 3 days; 23, 7 ± 4, 3 kg body weight; 121 ± 4,8 cm body height, were involved in this study after written consent was obtained from their parents. The children's motor structure was established through the application of 28 tests that had been verified on the Slovene population and established as adequate for the study of motor abilities in the sample children. The factor analysis was applied to uncover the latent structure of motor space, and PB (Štalec Momirović criteria were used to establish the number of significant basic components. The analysis of the motor space structure revealed certain particularities for each age period. In the sample of 5 year old children, the use of PB criterion revealed four latent motor dimensions, in 6.5 year old children, the latent motor space structure was described with four (boys and five (girls factors. Despite the existence of gender differences in motor space structure and certain particularities in each age period mostly related to the factors which influence movement coordination, several very similar dimensions were discovered in both sexes.

  20. External conditions and structure development in the Norwegian electricity supply; Rammebetingelser og strukturutvikling

    Thommessen; Krefting; Greve; Lund

    1997-12-31

    In Norway, an act of 1996 implied a total reform of the taxation system for electricity suppliers. Publicly owned utilities are also subject to this act. The problem discussed in this report is whether energy political goals about fewer and larger units are weakened or strengthened because of today`s taxation rules. The taxation rules are considered only in relation to any structural changes. The external conditions that can affect the structural development are: (1) duties and licences, (2) concessionary rules, (3) regulation of network tariffs, (4) judicial problems of competition, (5) judicial problems of company. They are discussed in detail. The general conclusion is that the design and practice of public regulations strongly interfere with and affect the incentives and possibility for a restructuring of the power sector. 1 table

  1. Developing a Standard Definition of Whole-Grain Foods for Dietary Recommendations: Summary Report of a Multidisciplinary Expert Roundtable Discussion12

    Ferruzzi, Mario G.; Jonnalagadda, Satya S.; Liu, Simin; Marquart, Len; McKeown, Nicola; Reicks, Marla; Riccardi, Gabriele; Seal, Chris; Slavin, Joanne; Thielecke, Frank; van der Kamp, Jan-Willem; Webb, Densie

    2014-01-01

    Although the term “whole grain” is well defined, there has been no universal standard of what constitutes a “whole-grain food,” creating challenges for researchers, the food industry, regulatory authorities, and consumers around the world. As part of the 2010 Dietary Guidelines for Americans, the U.S. Dietary Guidelines Technical Advisory Committee issued a call to action to develop definitions for whole-grain foods that could be universally accepted and applied to dietary recommendations and planning. The Committee’s call to action, and the lack of a global whole-grain food definition, was the impetus for the Whole Grain Roundtable held 3–5 December 2012 in Chicago, Illinois. The objective was to develop a whole-grain food definition that is consistent with the quartet of needs of science, food product formulation, consumer behavior, and label education. The roundtable’s expert panel represented a broad range of expertise from the United States and Europe, including epidemiology and dietary intervention researchers, consumer educators, government policy makers, and food and nutrition scientists from academia and the grain food industry. Taking into account the totality, quality, and consistency of available scientific evidence, the expert panel recommended that 8 g of whole grain/30 g serving (27 g/100 g), without a fiber requirement, be considered a minimum content of whole grains that is nutritionally meaningful and that a food providing at least 8 g of whole grains/30-g serving be defined as a whole-grain food. Having an established whole-grain food definition will encourage manufacturers to produce foods with meaningful amounts of whole grain, allow consistent product labeling and messaging, and empower consumers to readily identify whole-grain foods and achieve whole-grain dietary recommendations. PMID:24618757

  2. Discussion on the Assets Impairment Accounting Development in Our Country%浅议资产减值会计在我国的发展

    张智慧

    2011-01-01

    Under the historical cost principle, an impairment less is recognized when assets have been transferred, sold and so on. Its result is reflected at the asset and liability statement and the profit and loss statement, the asset value and the net income are all overestimated. Thus cause the financial reports reflect actual financial position and operating performance real and fairly of the enterprise with difficulty. In the development of assets devaluation accounting basis, this article compares the difference between the assets impairment accounting of our country and international practice,studies the assets impairment accounting of our country and expounds the development trend of the assets impairment accounting of our country.%在以历史成本计量资产价值的情况下,资产减值损失只有在相关资产发生转让、出售等时才予以确认,其结果是会计报表所反映的资产价值和净利润等均被高估,从而导致财务会计报告难以真实地反映企业实际的财务状况和经营成果.本文在对资产减值会计在我国发展的基础上,比较了我国资产减值会计与国际惯例的差异,对我国资产减值会计发展进行思考,阐述我国资产减值会计的发展趋势.

  3. Recent developments for fast reactor structural design standard (FDS)

    Kasahara, N.; Nakamuria, K.; Morishita, M.; Shibamoto, H.; Nagashima, H.; Inoue, K.

    2005-01-01

    For realization of reliable and economical fast reactor (FR) plants, Japan Nuclear Cycle Development Institute(JNC) and Japan Atomic Power Company(JAPC) are cooperating on 'Feasibility Study on Commercialized FR Cycle Systems'. To certify the design concepts through evaluation of their structural integrity, the research and development of 'Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)' is recognized as an essential theme. FDS focuses on particular failure modes of FRs such as ratchet deformation and creep fatigue damages due to cyclic thermal loads. To evaluate these modes, three main developments are in progress. One is 'Refinement of Failure Criteria' for particular modes of FRs. Next is development of 'Guidelines for Inelastic Design Analysis' in order to predict elastic plastic and creep behaviors. Furthermore, efforts are being made toward preparing 'Guidelines for Thermal Load Modeling' for FR component design where thermal loads are dominant. These studies were performed under the sponsorship of the Ministry of Economy, Trade and Industry of Japanese government. (authors)

  4. High-Reliable PLC RTOS Development and RPS Structure Analysis

    Sohn, H. S.; Song, D. Y.; Sohn, D. S.; Kim, J. H. [Enersys Co., Daejeon (Korea, Republic of)

    2008-04-15

    One of the KNICS objectives is to develop a platform for Nuclear Power Plant(NPP) I and C(Instrumentation and Control) system, especially plant protection system. The developed platform is POSAFE-Q and this work supports the development of POSAFE-Q with the development of high-reliable real-time operating system(RTOS) and programmable logic device(PLD) software. Another KNICS objective is to develop safety I and C systems, such as Reactor Protection System(RPS) and Engineered Safety Feature-Component Control System(ESF-CCS). This work plays an important role in the structure analysis for RPS. Validation and verification(V and V) of the safety critical software is an essential work to make digital plant protection system highly reliable and safe. Generally, the reliability and safety of software based system can be improved by strict quality assurance framework including the software development itself. In other words, through V and V, the reliability and safety of a system can be improved and the development activities like software requirement specification, software design specification, component tests, integration tests, and system tests shall be appropriately documented for V and V.

  5. High-Reliable PLC RTOS Development and RPS Structure Analysis

    Sohn, H. S.; Song, D. Y.; Sohn, D. S.; Kim, J. H.

    2008-04-01

    One of the KNICS objectives is to develop a platform for Nuclear Power Plant(NPP) I and C(Instrumentation and Control) system, especially plant protection system. The developed platform is POSAFE-Q and this work supports the development of POSAFE-Q with the development of high-reliable real-time operating system(RTOS) and programmable logic device(PLD) software. Another KNICS objective is to develop safety I and C systems, such as Reactor Protection System(RPS) and Engineered Safety Feature-Component Control System(ESF-CCS). This work plays an important role in the structure analysis for RPS. Validation and verification(V and V) of the safety critical software is an essential work to make digital plant protection system highly reliable and safe. Generally, the reliability and safety of software based system can be improved by strict quality assurance framework including the software development itself. In other words, through V and V, the reliability and safety of a system can be improved and the development activities like software requirement specification, software design specification, component tests, integration tests, and system tests shall be appropriately documented for V and V.

  6. Postnatal development of collagen structure in ovine articular cartilage

    Kranenbarg Sander

    2010-06-01

    Full Text Available Abstract Background Articular cartilage (AC is the layer of tissue that covers the articulating ends of the bones in diarthrodial joints. Across species, adult AC shows an arcade-like structure with collagen predominantly perpendicular to the subchondral bone near the bone, and collagen predominantly parallel to the articular surface near the articular surface. Recent studies into collagen fibre orientation in stillborn and juvenile animals showed that this structure is absent at birth. Since the collagen structure is an important factor for AC mechanics, the absence of the adult Benninghoff structure has implications for perinatal AC mechanobiology. The current objective is to quantify the dynamics of collagen network development in a model animal from birth to maturity. We further aim to show the presence or absence of zonal differentiation at birth, and to assess differences in collagen network development between different anatomical sites of a single joint surface. We use quantitative polarised light microscopy to investigate properties of the collagen network and we use the sheep (Ovis aries as our model animal. Results Predominant collagen orientation is parallel to the articular surface throughout the tissue depth for perinatal cartilage. This remodels to the Benninghoff structure before the sheep reach sexual maturity. Remodelling of predominant collagen orientation starts at a depth just below the future transitional zone. Tissue retardance shows a minimum near the articular surface at all ages, which indicates the presence of zonal differentiation at all ages. The absolute position of this minimum does change between birth and maturity. Between different anatomical sites, we find differences in the dynamics of collagen remodelling, but no differences in adult collagen structure. Conclusions The collagen network in articular cartilage remodels between birth and sexual maturity from a network with predominant orientation parallel to the

  7. Innovative economic structures – support for development of urban systems

    Florin Marian Buhociu

    2013-12-01

    Full Text Available Training and development of urban systems (US is a main direction of territorial and regional development which requires multiple studies, including those of economic background. They should aim to highlight, on the one hand, the economic potential of geographical areas making up the urban system and secondly to assess development trends you need to focus their own resources and those that are to be attracted to getting a economic trend upward in that area. It is therefore very important a zonal configuration of the urban system by following the joint capitalization of existing human and material resources, including by building synergy effect to be achieved following the joint evolution of settlements in the US. Along with the development of US is required, from the economical point of view, to implement new forms of economic structures to directly potentate the development of the area through constant cooperation, innovation and transfer of know-how. Romania currently has seven major urban centers that were selected and were assigned the role of growth poles. There were also 13 designated urban growth poles, including Galati and Braila. Urban agglomeration formed by the two municipalities, located at a distance from each other of about 25 km, is the second largest in the country after Bucharest. There is currently underway specialized documentation to achieve an optimal configuration for US Galati-Braila. From the economic point of view in the respective area can be implemented new development structures of cluster (Porter, M.E.,2000 type aimed at achieving the competitiveness poles and which will constitute the true engine of economic development. These two new structures of economic development are characterized by the fact that they allow and provide the necessary conditions to attract the systems and modern technologies to build local innovation systems that can be integrated into similar systems at regional and even national level. It is

  8. Reflecting on the essence of our problem-based learning discussions: the importance of faculty development and our continuous quest for applications of problem-based learning.

    Chan, Engle Angela

    2009-05-01

    While problem-based learning (PBL) is a teaching strategy to promote critical thinking, creativity and self-directedness in learning is very important. It is the meaning of the learning, with a contextual understanding, that marks the significance of this approach in our healthcare education. At the 2008 Kaohsiung Medical University International Conference and Workshop on PBL, the scholarly discourse on sharing empirical findings and practical experience with various aspects of PBL brought forth the importance of the teachers' continued learning about the meaning, the dynamics of the process, and the pragmatic details of PBL. This quest for a continuous learning and understanding about PBL parallels our search to extend the classroom PBL into students' clinical experience. The development of clinical teachers in the understanding of PBL was explored as part of their experiential learning in clinical teaching after their PBL workshops. While the clinical teachers who participated in the project appreciated the merits of clinical PBL, the complex balance between patient service and student teaching--in an unpredictable clinical setting--has led to the use of a simulated clinical environment with simulated patients. We also piloted PBL for interprofessional education of undergraduate students of nursing and social work. The ways we can adopt PBL in various settings with different intents will help prepare our healthcare graduates in meeting the challenges of our ever more complex healthcare systems, and the demands of holistic patient care.

  9. Reflecting on the Essence of our Problem-Based Learning Discussions: The Importance of Faculty Development and our Continuous Quest for Applications of Problem-Based Learning

    Engle Angela Chan

    2009-05-01

    Full Text Available While problem-based learning (PBL is a teaching strategy to promote critical thinking, creativity and self-directedness in learning is very important. It is the meaning of the learning, with a contextual understanding, that marks the significance of this approach in our healthcare education. At the 2008 Kaohsiung Medical University International Conference and Workshop on PBL, the scholarly discourse on sharing empirical findings and practical experience with various aspects of PBL brought forth the importance of the teachers' continued learning about the meaning, the dynamics of the process, and the pragmatic details of PBL. This quest for a continuous learning and understanding about PBL parallels our search to extend the classroom PBL into students' clinical experience. The development of clinical teachers in the understanding of PBL was explored as part of their experiential learning in clinical teaching after their PBL workshops. While the clinical teachers who participated in the project appreciated the merits of clinical PBL, the complex balance between patient service and student teaching—in an unpredictable clinical setting—has led to the use of a simulated clinical environment with simulated patients. We also piloted PBL for interprofessional education of undergraduate students of nursing and social work. The ways we can adopt PBL in various settings with different intents will help prepare our healthcare graduates in meeting the challenges of our ever more complex healthcare systems, and the demands of holistic patient care.

  10. Development and mechanical properties of structural materials from lunar simulants

    Desai, Chandra S.; Girdner, K.; Saadatmanesh, H.; Allen, T.

    1991-01-01

    Development of the technologies for manufacture of structural and construction materials on the Moon, utilizing local lunar soil (regolith), without the use of water, is an important element for habitats and explorations in space. Here, it is vital that the mechanical behavior such as strength and flexural properties, fracture toughness, ductility and deformation characteristics be defined toward establishment of the ranges of engineering applications of the materials developed. The objective is to describe the research results in two areas for the above goal: (1) liquefaction of lunar simulant (at about 100 C) with different additives (fibers, powders, etc.); and (2) development and use of a new triaxial test device in which lunar simulants are first compressed under cycles of loading, and then tested with different vacuums and initial confining or in situ stress.

  11. Institutional Structure and International Competitiveness Relationship in Developed Countries

    Aynur Yıldırım

    2016-06-01

    Full Text Available This study analyzes the effects of institutional structure on the international competitiveness of developed countries econometrically by employing a “Panel Data Analysis” with a sample of 21 developed countries and 23 institutional variables for the period 2000-2011. The results of the analysis indicate that while judicial independence, protection of intellectual property rights, integrity of the juridical system, marginal tax, political freedoms, black market exchange rate, restrictions on foreign investment, private sector’s share in the banking system, hiring-minimum wage, and hiring-dismissal have a positive effect; the nature of legal arrangements, government spending, transfers and subsidies, civil liberties, tariffs, regulations regarding trade barriers, collective bargaining, and military tutelage have a negative effect on the international competitiveness of developed countries.

  12. Diagnostic Technology Development for Core Internal Structure in CANDU reactor

    Jung, Hyun Kyu; Cheong, Y. M.; Lee, Y. S. and others

    2005-04-01

    Degradation of critical components of nuclear power plants has become important as the operating years of plants increase. The necessity of degradation study including measurement and monitoring technology has increased continuously. Because the fuel channels and the neighboring sensing tubes and control rods are particularly one of the critical components in CANDU nuclear plant, they are treated as a major research target in order to counteract the possible problems and establish the counterplan for the CANDU reactor safety improvement. To ensure the core structure integrity in CANDU nuclear plant, the following 2 research tasks were performed: Development of NDE technologies for the gap measurement between the fuel channels and LIN tubes. Development of vibration monitoring technology of the fuel channels and sensing tubes. The technologies developed in this study could contribute to the nuclear safety and estimation of the remaining life of operating CANDU nuclear power plants

  13. Development of image analysis for graphite pore-structure determination using fluorescence techniques

    Stephen, W.J.; Bowden, E.A.T.; Wickham, A.J.

    1983-03-01

    The use of image analysis to assess the pore structure of graphite has been developed to the point at which it may be considered available for routine use. A definitive pore structure in terms of the geometry-independent ''characteristic pore dimension'' is derived from the computer analysis of polished specimens whose open-pore structure has been impregnated with bismuth or a fluorescent epoxy resin, with the very small pores identified separately by mercury porosimetry as in the past. The pore-size distributions obtained from these combined techniques have been used successfully to predict the corrosion rates of nine graphites, of widely differing pore structure, in a variety of gas compositions and, indirectly, to confirm appropriate mean ranges and rate constants for the reaction of the oxidising species in these gas mixtures. The development of the fluorescent-impregnant technique is discussed in detail and its use is justified in preference to ''traditional'' methods. Further possible refinements are discussed, including the eventual aim of obtaining a computer prediction of the future oxidation behaviour of the graphite directly from the image analyser. (author)

  14. THE DEVELOPMENT OF SELF STRUCTURES AND ACTIVE COPING

    J. Knežević

    2016-03-01

    Full Text Available In addition to cope with usual stressful circumstances at work, nowadays, it is important to examine what kind of mental capacities of medical staff are adaptive in respect of a new type of stress – job insecurity. Special focus is put upon self structures as personality determinants and the role they have in coping.. The aim of the study was to determine the role of the self structures in active coping with job insecurity. It was supposed that the increasing integration of self structures leads to increasing use of active coping strategies. Perceived job insecurity was measured by The job insecurity perception scale (Knežević and Majstorović, 2013. The Ego Functioning Questionnaire (Majstorović, Legault and Green-Demers, 2008 was used to evaluate types of ego-functioning; coping were assessed by the Cybernetic coping scale (Edwards and Baglioni, 1993. In order to test the hypothesis the multivariate regression analysis was developed with self-regulation as predictor and active coping strategy as a criterion. A significant model F(3, 306 = 26,73, p < 0,001, was obtained with all the predictors selected as significant. The prediction directions were as expected - Integrated and Ego-investing self were positive predictors (β = 0,35, p < 0,001, and β = 0,16, p < 0,01, respectively, while the impersonal self singled out as a negative predictor (β = –0,13, p < 0,05. The results have shown that the development of self structures is valid predictor for the active coping of medical staff when facing with job insecurity.

  15. Panel discussion on vaccine development to meet U.S. and international needs. Strategies for reducing the disincentives to HIV vaccine development: description of a successful public-private sector international collaboration.

    Bronnenkant, L

    1994-01-01

    A representative of Finishing Enterprises, the world's largest manufacturer of intrauterine contraceptive devices (IUDs), discusses how to alter the balance of incentives-disincentives to expedite the development of HIV vaccines for international evaluation. Three main disincentives exist for private manufacturers in the United States to develop a new HIV vaccine to be used in developing countries, outside the profitable North American and western European markets: 1) low profit margin because of limited money, time, and resources. Medium and large-sized corporations are more concerned with a high return on their investment owing to stockholder pressure than with the human benefit of that investment. 2) Lengthy regulatory approval process. The current regulatory process in the US is tedious, time-consuming, and costly. 3) Liability risk. The United States is the most litigious society in the world. Suits filed against US corporations involved in drug manufacture incur legal defence costs, which make an already low profit margin HIV vaccine even lower. Finishing Enterprises' IUD program aimed at providing the safest and most effective IUD at an affordable price in a socially responsible way. The Population Council developed the Copper T and retained the patent rights. They and other international health authorities, such as the World Health Organization, conducted or monitored international clinical trials to determine safety and efficacy. Private foundations and public donor agencies funded these activities. When donor agencies committed to volume purchases for their commodity programs, Finishing Enterprises could commit to volume pricing. Whenever high-margin private sector sales occur, Population Council receives a royalty payment. Thus, the disincentives were overcome: 1) Low profit margin was less an issue for a small, private company created specifically to manufacture IUDs and guaranteed volume orders. 2) Lengthy regulatory approval processes were avoided by

  16. Structuralism.

    Piaget, Jean

    Provided is an overview of the analytical method known as structuralism. The first chapter discusses the three key components of the concept of a structure: the view of a system as a whole instead of so many parts; the study of the transformations in the system; and the fact that these transformations never lead beyond the system but always…

  17. Discussion

    Mittleman, M.H.

    1985-01-01

    The positive energy projection operators, just described by Prof. Sucher, convert the sick Hamiltonian, H/sub DC/, into a more robust one which can support bound states. They are however still a subject of some controversy. Prof. Grant pointed out that existing computer codes produce remarkable accuracy in numerical calculations which start from H/sub DC/ (with no projection operators) and so he questioned whether these operators were indeed necessary. In response, it was pointed out by several people in the audience that the codes implicitly limit the Dirac-Hartee-Fock wave functions to a normalizable sub-space and that this operation can be described as a projection operator which has the effect of eliminating the negative energy states which are not normalizable. This operation is however, not any of the three projection operators described by Sucher and so the question arises as to the sensitivity of the results (for the energy and wave functions) to the particular projection operators which are used. This appears to be an open question

  18. A gestão do Sistema Único de Assistência Social (SUAS: uma discussão sobre os eixos estruturantes (The management of the Unified Social Assistance System (SUAS: a discussion of the structural axes - Doi: 10.5212/Emancipacao.v.14i2.0010

    Angela Maria Moura Costa Prates

    2016-03-01

    Full Text Available Resumo: O presente artigo tem como objetivo discutir a gestão do Sistema Único de Assistência Social (SUAS, considerando os seus eixos estruturantes e os desafios para a sua implementação na gestão pública. Trata-se de uma pesquisa bibliográfica tendo por base a Política Nacional de Assistência Social (PNAS e autores que discutem os princípios democráticos da gestão pública. Percebemos que o atual sistema, no marco da legalidade, rompe com os aspectos tuteladores historicamente presentes na política e inova uma perspectiva de direito de cidadania. A gestão do SUAS em acordo com as normativas legais pode produzir o efeito de romper com os estigmas conservadores, históricos na Política de Assistência Social, e construir uma política de fato pública, direito do cidadão e dever do Estado. Palavras-chave: Assistência Social – Sistema Único – Eixos Estruturantes. Abstract: This article aims to reflect on the structuring bases of the Unified System Social Assistance (SUAS and the challenges to its implementation in daily practice of public management. It is grounded in a literature references that discuss the system, and documentary research is about the same. We realize that the current system within the framework of legality, disrupts aspects guardianship historically present in the Politics of Social Welfare and innovative perspective of citizenship rights and this challenges the public administration in order to understand the social assistance as a state policy and not government. But we must beware of the tendency focus that imposes neoliberal public management and influencing on Social Assistance Policy. Keywords: Social Assistance – Unified System - Structuring Bases

  19. Structural Change and Economic Development in China and India

    Vittorio Valli

    2009-06-01

    Full Text Available The comparison of the periods of rapid economic growth in China since 1978 and India since 1992 markedly show different patterns of development and structural change. However, both countries experienced some advantages of "relative economic backwardness" and some aspects of the "fordist model of growth". China had an anticipated and deeper structural change, spurred mainly by economic reforms and the growth of the internal market in the 1980s, and, since the mid-1990s, by a very rapid penetration of its industrial products in the world market. However, a substantial part of China's exports in medium and high tech sectors are due to joint-ventures with foreign multinationals. India had a more balanced structural change and a slower insertion in the world market, although some sectors, such as software, steel, automotive and pharmaceuticals are recently increasing their share in the world markets. Owing to the huge number of micro-enterprises and the great size of the informal sector, India benefited much less than China from the economies of scale and from the third wave of the "fordist model of growth". Both countries, but in particular China, experienced negative externalities of this recent phase of rapid growth, such as higher inequalities, pollution and urban congestion.

  20. Technology Development Benefits and the Economics Breakdown Structure

    Shaw, Eric J.

    1998-01-01

    This paper describes the construction and application of the EBS (Economics Breakdown Structure) in evaluating technology investments across multiple systems and organizations, illustrated with examples in space transportation technology. The United States Government (USG) has a long history of investing in technology to enable its missions. Agencies such as the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) have evaluated their technology development programs primarily on their effects on mission performance and cost. More and more, though, USG agencies are being evaluated on their technology transfer to the commercial sector. In addition, an increasing number of USG missions are being accomplished by industry-led or joint efforts, where the USG provides technology and funding but tasks industry with development and operation of the mission systems.

  1. Structured interview approach to the development of plant maintenance unavailabilities

    Fragola, J.R.; Jacobs, M.

    1986-01-01

    In a nuclear generating facility, the overall plant economics and safety suffer when a component is not available when needed. Maintenance unavailabilities provide a mechanism to predict the probability that a specific component is not available to function on demand due to maintenance. The development of these maintenance unavailabilities required a visit to an operational pressurized water reactor (PWR) nuclear facility to conduct an interview process with the plant operators who provided their insights into availability histories of the components of interest. A structured approach was developed for the extraction of downtime information from the plant operators, which was essential to ensure that the data gathered were relevant to the study and, most important, consistent within a specific component type. This process provided traceability so that it could be understood where the data originated from some years hence. In addition, it had to be reproducible providing the same steps were followed by another interviewer where the results would be consistent

  2. Development of piping support structure design software based on PDMS

    Tang Yongtao; Guan Hui; Su Rongfu; Huang Wei; Mao Huihui

    2014-01-01

    In order to enhance the efficiency of nuclear power process system piping support design, the veracity of interface with support, piping and anchor, and decrease the clash between supports and other disciplines, developed piping support structure design software NPHS based on PDMS independently. That achieved the seamless integration of PDMS and NPHS by method of embedded development, reduce the size of program code, improve the running efficiency; That predigested the 3D modeling and information storage for support parts, that increased the support database opening and maintenance using the special mechanism and configuration of database. The support modeling efficiency due to setting of the connection key point of support parts is improved. Practices in several real nuclear power projects proved that NPHS software is provided with such outstanding performances: quick running, strong stability, accurate data, easy to operate and maintain, and output results satisfied the engineering requirements. (authors)

  3. Discussion on Papers 14 - 16

    Charles-Jones, S.; Muirhead, S.; Wilson, E.A.; Jefferson, M.; Binnie, C.J.A.; O'Connor, B.A.; Rothwell, P.; Cowie, D.

    1992-01-01

    Further observations were made on the great potential for tidal power developments in NW Australia. Discussion on the Severn Barrage paper and environmental effects of tidal power plants centred mainly around the impact on bird populations. The topics covered were: the adaptability of birds to changes in their environment with particular reference to the importance of inter-tidal areas for wildfowl and wading birds in the United Kingdom; the creation of mudflats as replacement feeding areas for wading birds; whether there is a danger that pressure from the construction industry might result in a barrage being built before the uncertainties in the environmental impact assessment are removed. Separate abstracts have been prepared for the three papers under discussion. (UK)

  4. A Multicultural Discussion About Personality Development

    Carlson, Jon; Kurato, Yoshiya; Ruiz, Elizabeth; Ng, Kok-Mun; Yang, Julia

    2004-01-01

    The use of knife and fork common in Western cultures has influenced Japanese people not only in terms of eating habits but also Japanese personality characteristics. This influence fosters the notion of segmentation - that all areas of life, including people, can be sectioned into parts and so analyzed. Mind and body are considered two discrete…

  5. Research Developments in Nondestructive Evaluation and Structural Health Monitoring for the Sustainment of Composite Aerospace Structures at NASA

    Cramer, K. Elliott

    2016-01-01

    The use of composite materials continues to increase in the aerospace community due to the potential benefits of reduced weight, increased strength, and manufacturability. Ongoing work at NASA involves the use of the large-scale composite structures for spacecraft (payload shrouds, cryotanks, crew modules, etc). NASA is also working to enable both the use and sustainment of composites in commercial aircraft structures. One key to the sustainment of these large composite structures is the rapid, in-situ characterization of a wide range of potential defects that may occur during the vehicle's life. Additionally, in many applications it is necessary to monitor changes in these materials over their lifetime. Quantitative characterization through Nondestructive Evaluation (NDE) of defects such as reduced bond strength, microcracking, and delamination damage due to impact, are of particular interest. This paper will present an overview of NASA's applications of NDE technologies being developed for the characterization and sustainment of advanced aerospace composites. The approaches presented include investigation of conventional, guided wave, and phase sensitive ultrasonic methods and infrared thermography techniques for NDE. Finally, the use of simulation tools for optimizing and validating these techniques will also be discussed.

  6. Radial Structure Scaffolds Convolution Patterns of Developing Cerebral Cortex

    Mir Jalil Razavi

    2017-08-01

    Full Text Available Commonly-preserved radial convolution is a prominent characteristic of the mammalian cerebral cortex. Endeavors from multiple disciplines have been devoted for decades to explore the causes for this enigmatic structure. However, the underlying mechanisms that lead to consistent cortical convolution patterns still remain poorly understood. In this work, inspired by prior studies, we propose and evaluate a plausible theory that radial convolution during the early development of the brain is sculptured by radial structures consisting of radial glial cells (RGCs and maturing axons. Specifically, the regionally heterogeneous development and distribution of RGCs controlled by Trnp1 regulate the convex and concave convolution patterns (gyri and sulci in the radial direction, while the interplay of RGCs' effects on convolution and axons regulates the convex (gyral convolution patterns. This theory is assessed by observations and measurements in literature from multiple disciplines such as neurobiology, genetics, biomechanics, etc., at multiple scales to date. Particularly, this theory is further validated by multimodal imaging data analysis and computational simulations in this study. We offer a versatile and descriptive study model that can provide reasonable explanations of observations, experiments, and simulations of the characteristic mammalian cortical folding.

  7. Development and mechanical properties of structural materials from lunar simulant

    Desai, Chandra S.

    1991-01-01

    Development of versatile engineering materials from locally available materials in space is an important step toward establishment of outposts such as on the moon and Mars. Here development of the technologies for manufacture of structural and construction materials on the moon, utilizing local lunar soil (regolith), without the use of water, is an important element for habitats and explorations in space. It is also vital that the mechanical behavior such as strength and flexural properties, fracture toughness, ductility, and deformation characteristics are defined toward establishment of the ranges of engineering applications of the materials developed. The objectives include two areas: (1) thermal liquefaction of lunar simulant (at about 1100 C) with different additives (fibers, powders, etc.); and (2) development and use of a traxial test device in which lunar simulants are first compacted under cycles of loading, and then tested with different vacuums and initial confining or insitu stress. The second area was described in previous progress reports and publications; since the presently available device allows vacuum levels up to only 10(exp -4) torr, it is recommended that a vacuum pump that can allow higher levels of vacuum is acquired.

  8. The Field of Foucaultian Discourse Analysis: Structures, Developments and Perspectives

    Rainer Diaz-Bone

    2007-05-01

    Full Text Available The article outlines the field of FOUCAULTian discourse analysis. The FOUCAULTian concept of discourse is introduced, and methodological positions and methodological developments are sketched. Compared to other qualitative social research approaches, the different researchers and research groups that have adopted the FOUCAULTian concept of discourse are not linked by a fully integrated common research paradigm. However, they share common methodological problems and areas of methodological research resulting from various references to FOUCAULTian positions. In the last decade, different research groups have become aware of these shared commonalities, so that one can speak of an emerging field of FOUCAULTian discourse analysis rather than an emerging paradigm. The article gives insight into the discourse analytic research in selected countries, discusses the internationalisation of FOUCAULTian discourse analysis and highlights current trends and perspectives. URN: urn:nbn:de:0114-fqs0702305

  9. Development of Electromagnetic Band Gap Structures in the Perspective of Microstrip Antenna Design

    Md. Shahidul Alam

    2013-01-01

    Full Text Available Electromagnetic band gap (EBG technology has become a significant breakthrough in the radio frequency (RF and microwave applications due to their unique band gap characteristics at certain frequency ranges. Since 1999, the EBG structures have been investigated for improving performances of numerous RF and microwave devices utilizing the surface wave suppression and the artificial magnetic conductor (AMC properties of these special type metamaterial. Issues such as compactness, wide bandwidth with low attenuation level, tunability, and suitability with planar circuitry all play an important role in the design of EBG structures. Remarkable efforts have been undertaken for the development of EBG structures to be compatible with a wide range of wireless communication systems. This paper provides a comprehensive review on various EBG structures such as three-, two-, and one-dimensional (3D, 2D, and 1D EBG, mushroom and uniplanar EBG, and their successive advancement. Considering the related fabrication complexities, implementation of vialess EBG is an attractive topic for microwave engineers. For microstrip antennas, EBG structures are used in diversified ways, which of course found to be effective except in some cases. The EBG structures are also successfully utilized in antenna arrays for reducing the mutual coupling between elements of the array. Current challenges and limitations of the typical microstrip antennas and different EBG structures are discussed in details with some possible suggestions. Hopefully, this survey will guide to increasing efforts towards the development of more compact, wideband, and high-efficient uniplanar EBG structures for performance enhancement of antenna and other microwave devices.

  10. Earth Summit Science, policy discussed

    Leath, Audrey T.

    The United Nations Conference on Environment and Development, the “Earth Summit,” convenes in Rio de Janeiro on June 3. President Bush has pledged to attend part of the 2-week conference. The highlight of the summit will be the signing of an international framework convention to reduce emissions of greenhouse gases. The final elements of the agreement were negotiated in New York last week by representative of 143 countries. In anticipation of the Rio conference, the Senate Committee on Energy and Natural Resources held two standing-roomonly hearings, reviewing the scientific basis for global warming due to greenhouse gases and discussing the details of the proposed convention.

  11. Development of a Wireless Unified-Maintenance System for the Structural Health Monitoring of Civil Structures.

    Heo, Gwanghee; Son, Byungjik; Kim, Chunggil; Jeon, Seunggon; Jeon, Joonryong

    2018-05-09

    A disaster preventive structural health monitoring (SHM) system needs to be equipped with the following abilities: First, it should be able to simultaneously measure diverse types of data (e.g., displacement, velocity, acceleration, strain, load, temperature, humidity, etc.) for accurate diagnosis. Second, it also requires standalone power supply to guarantee its immediate response in crisis (e.g., sudden interruption of normal AC power in disaster situations). Furthermore, it should be capable of prompt processing and realtime wireless communication of a huge amount of data. Therefore, this study is aimed at developing a wireless unified-maintenance system (WUMS) that would satisfy all the requirements for a disaster preventive SHM system of civil structures. The WUMS is designed to measure diverse types of structural responses in realtime based on wireless communication, allowing users to selectively use WiFi RF band and finally working in standalone mode by means of the field-programmable gate array (FPGA) technology. To verify its performance, the following tests were performed: (i) A test to see how far communication is possible in open field, (ii) a test on a shaker to see how accurate responses are, (iii) a modal test on a bridge to see how exactly characteristic real-time dynamic responses are of structures. The test results proved that the WUMS was able to secure stable communication far up to nearly 800 m away by acquiring wireless responses in realtime accurately, when compared to the displacement and acceleration responses which were acquired through wired communication. The analysis of dynamic characteristics also showed that the wireless acceleration responses in real-time represented satisfactorily the dynamic properties of structures. Therefore, the WUMS is proved valid as a SHM, and its outstanding performance is also proven.

  12. New approaches to the development of hybrid nanocomposites: from structural materials to high-tech applications

    Gerasin, V A; Antipov, Evgenii M; Karbushev, V V; Kulichikhin, Valerii G; Karpacheva, Galina P; Talroze, Raisa V; Kudryavtsev, Y V

    2013-01-01

    Current challenges in the development of various polymer nanocomposites and in the study of their properties are considered. Results of studying hybrid structural (polymer–layered silicates, polymer–nanodiamonds) and functional (based on conducting or liquid-crystalline polymers) nanomaterials are presented. Methods of modification of nanoparticles and their dispersion in a polymer matrix, and the role of interactions between a polymer matrix and fillers, as well as of nanoparticle morphology realized in the course of processing, are discussed. The bibliography includes 453 references.

  13. Development on methods for evaluating structure reliability of piping components

    Schimpfke, T.; Grebner, H.; Peschke, J.; Sievers, J.

    2003-01-01

    In the frame of the German reactor safety research program of the Federal Ministry of Economics and Labour, GRS has started to develop an analysis code named PROST (PRObabilistic STructure analysis) for estimating the leak and break probabilities of piping systems in nuclear power plants. The development is based on the experience achieved with applications of the public available US code PRAISE 3.10 (Piping Reliability Analysis Including Seismic Events), which was supplemented by additional features regarding the statistical evaluation and the crack orientation. PROST is designed to be more flexible to changes and supplementations. Up to now it can be used for calculating fatigue problems. The paper mentions the main capabilities and theoretical background of the present PROST development and presents a parametric study on the influence by changing the method of stress intensity factor and limit load calculation and the statistical evaluation options on the leak probability of an exemplary pipe with postulated axial crack distribution. Furthermore the resulting leak probability of an exemplary pipe with postulated circumferential crack distribution is compared with the results of the modified PRAISE computer program. The intention of this investigation is to show trends. Therefore the resulting absolute values for probabilities should not be considered as realistic evaluations. (author)

  14. Summary of presentations and discussions

    Takeuchi, Mitsuo

    2008-01-01

    In December 2007, the Forum on Stakeholder Confidence discussed its theme entitled 'Link between research, development and demonstration (RD and D) and stakeholder confidence'. It was remarked that regulators need a technical demonstration to aid in evaluating the safety case. Local stakeholders appreciate the opportunity to visualise technological arrangements. In both cases, demonstration adds to confidence in the feasibility of solutions. Some believe there is an important role for analogues in communication with stakeholders, if handled with integrity. To explore and benchmark current practices, it was decided to hold a topical session at the 9. regular meeting of the FSC on 4 June 2008 regarding the use of analogues for confidence building. The session opened with an introductory presentation by the session rapporteur. This incorporated input provided for the purpose by FSC members in cooperation with their country's representative to the NEA RWMC 'Integration Group on the Safety Case'. Three speakers then presented the various uses of analogues by implementers, regulators and scientists to build their own confidence; a fourth speaker dealt with the experience of using natural analogues in public information. The presentations addressed the use of analogues in the field of geological disposal of high-level waste (HLW) and long-lived intermediate level (ILW-LL) radioactive waste. Then the FSC participants split into two working groups for discussion. The outcome of these discussions was reported in plenary on 6 June 2008 and it was agreed to publish proceedings of the session. The present summary, prepared by the session rapporteur with input from the NEA Secretariat, captures the main points heard in the course of the event. It combines data from the formal presentations and remarks made in discussion. The latter represent viewpoints expressed by a group whose primary focus is not natural analogues but rather stakeholder interests. The summary and viewpoints

  15. Sea urchin vault structure, composition, and differential localization during development

    Dickey-Sims Carrie

    2005-02-01

    Full Text Available Abstract Background Vaults are intriguing ribonucleoprotein assemblies with an unknown function that are conserved among higher eukaryotes. The Pacific coast sea urchin, Strongylocentrotus purpuratus, is an invertebrate model organism that is evolutionarily closer to humans than Drosophila and C. elegans, neither of which possesses vaults. Here we compare the structures of sea urchin and mammalian vaults and analyze the subcellular distribution of vaults during sea urchin embryogenesis. Results The sequence of the sea urchin major vault protein (MVP was assembled from expressed sequence tags and genome traces, and the predicted protein was found to have 64% identity and 81% similarity to rat MVP. Sea urchin MVP includes seven ~50 residue repeats in the N-terminal half of the protein and a predicted coiled coil domain in the C-terminus, as does rat MVP. A cryoelectron microscopy (cryoEM reconstruction of isolated sea urchin vaults reveals the assembly to have a barrel-shaped external structure that is nearly identical to the rat vault structure. Analysis of the molecular composition of the sea urchin vault indicates that it contains components that may be homologs of the mammalian vault RNA component (vRNA and protein components (VPARP and TEP1. The sea urchin vault appears to have additional protein components in the molecular weight range of 14–55 kDa that might correspond to molecular contents. Confocal experiments indicate a dramatic relocalization of MVP from the cytoplasm to the nucleus during sea urchin embryogenesis. Conclusions These results are suggestive of a role for the vault in delivering macromolecules to the nucleus during development.

  16. DISCUSSION METHODS: MODIFICATION AND TRANSFORMATION

    Abbasova, A.A.

    2016-03-01

    Full Text Available This article is about how to the importance of selecting the optimal methods of stimulation and motivation to learn. In modern conditions it is very important that the teacher gave the students ready knowledge, and pointed the way for the acquisition of knowledge, taught to acquire knowledge. This requires the selection of effective forms of language and literature work with texts of different types and styles of speech, listening, speaking. In this regard, special attention should be given lessons of speech development. There is a special group of methods to stimulate the development of communicative competence. Among them, and the method of discussion, which is increasingly being used in the classroom in the Russian language

  17. Design development of the SCDTL structure for the TOP linac

    Picardi, L; Spataro, B

    1999-01-01

    The Side Coupled Drift Tube Linac (SCDTL) is an attractive 3 GHz accelerating structure composed of short DTL tanks coupled together by side coupling cavities, in the course of development of the 200 MeV proton linear accelerator for proton therapy planned for the Terapia Oncologica con Protoni (TOP) program of the Italian National Institute of Health (Istituto Superiore di Sanita, ISS). The TOP Linac will be used to boost to 70 MeV the 7 MeV proton beam from a linac injector. Our main concern is to investigate in detail the characteristics of the structure in terms of RF properties of the accelerating mode, like longitudinal and transverse shunt impedance and quality factor, and of the other modes that cause the origin of the tank dispersion curve, in order to stabilize the behaviour under operating conditions. Calculations performed with the computer three-dimensional (3D) codes MAFIA and SOPRANO on the smallest unit of the system (a single DTL tank without coupling cavities) and experimental measurements m...

  18. Multiscale analysis of structure development in expanded starch snacks

    van der Sman, R. G. M.; Broeze, J.

    2014-11-01

    In this paper we perform a multiscale analysis of the food structuring process of the expansion of starchy snack foods like keropok, which obtains a solid foam structure. In particular, we want to investigate the validity of the hypothesis of Kokini and coworkers, that expansion is optimal at the moisture content, where the glass transition and the boiling line intersect. In our analysis we make use of several tools, (1) time scale analysis from the field of physical transport phenomena, (2) the scale separation map (SSM) developed within a multiscale simulation framework of complex automata, (3) the supplemented state diagram (SSD), depicting phase transition and glass transition lines, and (4) a multiscale simulation model for the bubble expansion. Results of the time scale analysis are plotted in the SSD, and give insight into the dominant physical processes involved in expansion. Furthermore, the results of the time scale analysis are used to construct the SSM, which has aided us in the construction of the multiscale simulation model. Simulation results are plotted in the SSD. This clearly shows that the hypothesis of Kokini is qualitatively true, but has to be refined. Our results show that bubble expansion is optimal for moisture content, where the boiling line for gas pressure of 4 bars intersects the isoviscosity line of the critical viscosity 106 Pa.s, which runs parallel to the glass transition line.

  19. Development of all-beryllium riveted structures. [Frustrum; cylinders; cones

    Floyd, D. R.; Leslie, W. W.; Miley, D. V.; Nokes, R. W.

    1976-04-20

    Results are presented of a development program aimed at making a full-scale, all-beryllium frustrum by riveted assembly methods. Included are descriptions of the sheet-metal fabrication practices and assembly plans. Results of extensive mechanical testing of both ingot- and powder-source beryllium products that are presented include tensile, notch-tensile, bearing, and shear tests. Although the full-size structure has not been built, examples are given of several conical and cylindrical structures that were made. The largest of these is a 20-in. diameter, 15-in. long cylinder that was roll-formed from one 0.050-in. thick ingot sheet and assembled with 60 countersunk rivets. Tensile testing of riveted flat coupons is also reported as is bulge testing of riveted cylindrical shells. A cost comparison of riveted deep-drawn and powder-source cylinders is made. Results show that when strength and dimensional tolerance requirements are not severe, a riveted assembly approach is warranted. 33 figures, 8 tables. (auth)

  20. Kinetics of tracheid development explain conifer tree-ring structure.

    Cuny, Henri E; Rathgeber, Cyrille B K; Frank, David; Fonti, Patrick; Fournier, Meriem

    2014-09-01

    Conifer tree rings are generally composed of large, thin-walled cells of light earlywood followed by narrow, thick-walled cells of dense latewood. Yet, how wood formation processes and the associated kinetics create this typical pattern remains poorly understood. We monitored tree-ring formation weekly over 3 yr in 45 trees of three conifer species in France. Data were used to model cell development kinetics, and to attribute the relative importance of the duration and rate of cell enlargement and cell wall deposition on tree-ring structure. Cell enlargement duration contributed to 75% of changes in cell diameter along the tree rings. Remarkably, the amount of wall material per cell was quite constant along the rings. Consequently, and in contrast with widespread belief, changes in cell wall thickness were not principally attributed to the duration and rate of wall deposition (33%), but rather to the changes in cell size (67%). Cell enlargement duration, as the main driver of cell size and wall thickness, contributed to 56% of wood density variation along the rings. This mechanistic framework now forms the basis for unraveling how environmental stresses trigger deviations (e.g. false rings) from the normal tree-ring structure. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

  1. Feelings about culture scales: development, factor structure, reliability, and validity.

    Maffini, Cara S; Wong, Y Joel

    2015-04-01

    Although measures of cultural identity, values, and behavior exist in the multicultural psychological literature, there is currently no measure that explicitly assesses ethnic minority individuals' positive and negative affect toward culture. Therefore, we developed 2 new measures called the Feelings About Culture Scale--Ethnic Culture and Feelings About Culture Scale--Mainstream American Culture and tested their psychometric properties. In 6 studies, we piloted the measures, conducted factor analyses to clarify their factor structure, and examined reliability and validity. The factor structure revealed 2 dimensions reflecting positive and negative affect for each measure. Results provided evidence for convergent, discriminant, criterion-related, and incremental validity as well as the reliability of the scales. The Feelings About Culture Scales are the first known measures to examine both positive and negative affect toward an individual's ethnic culture and mainstream American culture. The focus on affect captures dimensions of psychological experiences that differ from cognitive and behavioral constructs often used to measure cultural orientation. These measures can serve as a valuable contribution to both research and counseling by providing insight into the nuanced affective experiences ethnic minority individuals have toward culture. (c) 2015 APA, all rights reserved).

  2. Development of Seismic Safety Assessment Technology for Containment Structure

    Jang, J.B.; Suh, Y.P.; Lee, J.R. [Korea Electric Power Research Institute, Taejon (Korea)

    2002-07-01

    This final report is made based on the research results of seismic analysis and seismic margin assessment field, carried out during 3rd stage ('01.4.1{approx}'02.3.31) under financial support of MOST(Ministry of Science and Technology). The objective of this research is to develop the soil - structure interaction analysis technique with high reliability, the main research subjects, performed during 3rd stage are as follows. 1) Preparation of user's guide manual for SSI analysis with high accuracy. 2) Sensitivity analysis of effective shear strain and seismic input motion. 3) Database construction of Hualien earthquake recorded data. (author). 21 refs., 27 figs., 2 tabs.

  3. A structure development in electron-irradiated type Ia diamond

    Novikov, N.V.; Ositinskaya, T.D.; Tkach, V.N.

    1998-01-01

    A type Ia diamond crystal with nitrogen impurity in different forms was irradiated by 3.5 MeV electrons with increasing doses 5 centre dot 10 16 , 2 centre dot 10 17 , 4 centre dot 10 17 , 2 centre dot 10 18 e/cm 2 and investigated before and after each dose by positron annihilation, EPR, and optical spectroscopy. After irradiation with the highest dose, the effect of development of a visible defective structure of the crystal is revealed. A description of this effect and data of EPR and IR-measurements depending on irradiation doses are presented. First results of cathodoluminescence (CL) studies in the form CL-topograms and CL-spectra for difference zones of the crystal are also given

  4. Development and application of advanced methods for electronic structure calculations

    Schmidt, Per Simmendefeldt

    . For this reason, part of this thesis relates to developing and applying a new method for constructing so-called norm-conserving PAW setups, that are applicable to GW calculations by using a genetic algorithm. The effect of applying the new setups significantly affects the absolute band positions, both for bulk......This thesis relates to improvements and applications of beyond-DFT methods for electronic structure calculations that are applied in computational material science. The improvements are of both technical and principal character. The well-known GW approximation is optimized for accurate calculations...... of electronic excitations in two-dimensional materials by exploiting exact limits of the screened Coulomb potential. This approach reduces the computational time by an order of magnitude, enabling large scale applications. The GW method is further improved by including so-called vertex corrections. This turns...

  5. Human Cloning: Let's Discuss It.

    Taras, Loretta; Stavroulakis, Anthea M.; Ortiz, Mary T.

    1999-01-01

    Describes experiences with holding discussions on cloning at a variety of levels in undergraduate biology courses. Discusses teaching methods used and student reactions to the discussions. Contains 12 references. (WRM)

  6. Coordinated development of muscles and tendon-like structures: early interactions in the Drosophila leg

    cedric esoler

    2016-02-01

    Full Text Available The formation of the musculoskeletal system is a remarkable example of tissue assembly. In both vertebrates and invertebrates, precise connectivity between muscles and skeleton (or exoskeleton via tendons or equivalent structures is fundamental for movement and stability of the body. The molecular and cellular processes underpinning muscle formation are well established and significant advances have been made in understanding tendon development. However, the mechanisms contributing to proper connection between these two tissues have received less attention. Observations of coordinated development of tendons and muscles suggest these tissues may interact during the different steps in their development. There is growing evidence that, depending on animal model and muscle type, these interactions can take place from progenitor induction to the final step of the formation of the musculoskeletal system. Here we briefly review and compare the mechanisms behind muscle and tendon interaction throughout the development of vertebrates and Drosophila before going on to discuss our recent findings on the coordinated development of muscles and tendon-like structures in Drosophila leg. By altering apodeme formation (the functional Drosophila equivalent of tendons in vertebrates during the early steps of leg development, we affect the spatial localisation of subsequent myoblasts. These findings provide the first evidence of the developmental impact of early interactions between muscle and tendon-like precursors, and confirm the appendicular Drosophila muscle system as a valuable model for studying these processes.

  7. Crustal structure and development of the SW Barents Sea and the adjacent continental margin

    Breivik, Asbjoern Johan

    1998-12-31

    Because of its expected petroleum potential, the western Barents Sea has been extensively mapped and investigated. The present thesis deals with many aspects of the geological development of this area. The emphasis is on Late Paleozoic structuring, Late Mesozoic basin formation, and early Tertiary margin formation including geodynamical response to the late Cenozoic sedimentation. The thesis begins with a review of the literature on the Late Palaeozoic structural development of the south-western Barents Sea, Svalbard and eastern Greenland. A structural map is developed for the Upper Carboniferous rift system in the southwestern Barents Sea that shows the interference of the northeasterly and the northerly structural grain. A discussion of the Ottar Basin uses a combination of seismic interpretation and gravity modelling to investigate this important structural element of the Upper Palaeozoic rift system. Previous work on Late Mesozoic basin formation in the southwestern Barents Sea is extended by incorporating new seismic reflection data and gravity modelling. Finally, the focus is shifted from the Barents Sea shelf to the continental-ocean transition and the oceanic basin. Gridded free-air gravity data from the ERS-1 enables the construction of a Bouguer gravity map of unprecedented resolution. The relationship between isostacy and gravity was resolved by modelling the thermal structure across the margin. Admittance analysis of the relationship between bathymetry and free-air gravity indicates an elastic thickness of the oceanic Lithosphere of 15-20 km, which is compatible with the depth to the 450{sup o}C isotherm obtained from thermal modelling. It is concluded that the southwestern Barents Sea margin does not deviate in any significant respects from passive rifted margins, except for a very straight and narrow continent-ocean transition zone. 332 refs., 55 figs., 7 tabs.

  8. ES12; The 24th Annual Workshop on Recent Developments in Electronic Structure Theory

    Holzwarth, Natalie [Wake Forest Univ., Winston-Salem, NC (United States); Thonhauser, Timo [Wake Forest Univ., Winston-Salem, NC (United States); Salam, Akbar [Wake Forest Univ., Winston-Salem, NC (United States)

    2012-06-29

    ES12: The 24th Annual Workshop on Recent Developments in Electronic Structure Theory was held June 5-8, 2012 at Wake Forest University in Winston-Salem, NC 27109. The program consisted of 24 oral presentations, 70 posters, and 2 panel discussions. The attendance of the Workshop was comparable to or larger than previous workshops and participation was impressively diverse. The 136 participants came from all over the world and included undergraduate students, graduate students, postdoctoral researchers, and senior scientists. The general assessment of the Workshop was extremely positive in terms of the high level of scientific presentations and discussions, and in terms of the schedule, accommodations, and affordability of the meeting.

  9. Structured Annual Faculty Review Program Accelerates Professional Development and Promotion

    Stanley J. Robboy MD

    2017-03-01

    Full Text Available This retrospective observational study on faculty development analyzes the Duke University Pathology Department’s 18-year experience with a structured mentoring program involving 51 junior faculty members. The majority had MD degrees only (55%. The percentage of young women faculty hires before 1998 was 25%, increasing to 72% after 2005. Diversity also broadened from 9% with varied heritages before 1998 to 37% since then. The mentoring process pivoted on an annual review process. The reviews generally helped candidates focus much earlier, identified impediments they individually felt, and provided new avenues to gain a national reputation for academic excellence. National committee membership effectively helped gain national exposure. Thirty-eight percent of the mentees served on College of American Pathologists (CAP committees, exponential multiples of any other national society. Some used CAP resources to develop major programs, some becoming nationally and internationally recognized for their academic activities. Several faculty gained national recognition as thought leaders for publishing about work initiated to serve administrative needs in the Department. The review process identified the need for more protected time for research, issues with time constraints, and avoiding exploitation when collaborating with other departments. This review identified a rigorous faculty mentoring and review process that included annual career counseling, goal-oriented academic careers, monitored advancement to promotion, higher salaries, and national recognition. All contributed to high faculty satisfaction and low faculty turnover. We conclude that a rigorous annual faculty review program and its natural sequence, promotion, can greatly foster faculty satisfaction.

  10. Exploration and Development of High Entropy Alloys for Structural Applications

    Daniel B. Miracle

    2014-01-01

    Full Text Available We develop a strategy to design and evaluate high-entropy alloys (HEAs for structural use in the transportation and energy industries. We give HEA goal properties for low (≤150 °C, medium (≤450 °C and high (≥1,100 °C use temperatures. A systematic design approach uses palettes of elements chosen to meet target properties of each HEA family and gives methods to build HEAs from these palettes. We show that intermetallic phases are consistent with HEA definitions, and the strategy developed here includes both single-phase, solid solution HEAs and HEAs with intentional addition of a 2nd phase for particulate hardening. A thermodynamic estimate of the effectiveness of configurational entropy to suppress or delay compound formation is given. A 3-stage approach is given to systematically screen and evaluate a vast number of HEAs by integrating high-throughput computations and experiments. CALPHAD methods are used to predict phase equilibria, and high-throughput experiments on materials libraries with controlled composition and microstructure gradients are suggested. Much of this evaluation can be done now, but key components (materials libraries with microstructure gradients and high-throughput tensile testing are currently missing. Suggestions for future HEA efforts are given.

  11. The development of structures and the prospects of automatic transmissions

    O. I. Girutskiy

    2014-01-01

    Full Text Available At the present stage development of transport technology has a rapid change of production models along with intensification of modification processes of vehicles, increasing number of new developments thereby providing vehicles with higher consumer qualities and competitiveness at the markets. Automation control of car transmissions is an important task. It raises the life of the engine and transmission, increased permeability and comfort due to a smoother change of torque to the drive wheels, driving off, and acceleration, etc.The article analyzes the promising schemes rotary shaft and planetary gearboxes of leading companies in the world automotive industry, the advantages of automated transmissions. It offers the prospects of creating the control systems of transmissions based on artificial intelligence methods.To design modern vehicles equipped with automatically controlled fluid transmission is a challenge. It requires various technologies to be applied using new technical solutions and scientific principles. An analysis to solve the problem of automation control of various technical objects shows that the classical theory of automatic control does not allow taking into account the diversity of vehicles operating conditions. In this regard, the effectiveness of the systems based on its scientific principles becomes often lower than expected.Implementation of modern design technology is based on a number of scientific and philosophical principles. The most important and most common of them is the principle of hierarchy, which means to structure representations of objects by degree of detailed descriptions and the principle of decomposition (blocking, which means to decompose representations of each level on the number of components (blocks with the possibility for the separate (sub-block designing.In order to create a design of control systems for the cars and synthesize its control algorithms within the framework of the developed concept

  12. Low-activation structural ceramic composites for fusion power reactors: materials development and main design issues

    Perez, A.S.; Le Bars, N.; Giancarli, L.; Proust, E.; Salavy, J.F.

    1994-01-01

    Development of advanced Low-Activation Materials (LAMs) with favourable short-term activation characteristics is discussed, for the use as structural materials in a fusion power reactor (in order to reduce the risk associated with a major accident, in particular those related with radio-isotopes release in the environment), and to try to approach the concept of an inherently safe reactor. LA Ceramics Composites (LACCs) are the most promising LAMs because of their relatively good thermo-mechanical properties. At present, SiC/SiC composite is the only LACC considered by the fusion community, and therefore is the one having the most complete data base. The preliminary design of a breeding blanket using SiC/SiC as structural material indicated that significant improvement of its thermal conductivity is required. (author) 11 refs.; 3 figs

  13. The Structural Model of Future Employees̕ Personal and Professional Self-Development

    Zhanna G. Garanina

    2017-12-01

    Full Text Available Introduction: the main purpose of this paper is to present the theoretical and practical aspects of professional and personal self-development of future professionals, the construction of the structural model and the determination of levels of self-development. The study of personal and professional self-development attributes of future professionals is of special interest to modern researchers, as well as for practicing psychologists studying the problem of self-realization and self-improvement in their professional fields. This article discusses the theoretical approaches to the study of the model and structure of personal and professional self- development. It analyses the results of the comparative empirical study of the features of students self-development with various levels of formation of motivational-semantic sphere. The authors carried out the detailed theoretical analysis of the problem of personal and professional self-development. They offer the structural model of the process, including the set of interrelated value-semantic, reflexive and regulatory components. The study revealed that the personal and professional self-development is a comprehensive system based on the active personal transformation being carried out in the course of behavior and activities self-regulation of their behavior, designed to achieve personal and professional goals. Materials and Methods: diagnostic methods were used to identify the level of self-development and personal qualities of students. Processing of the data was carried out by means of correlation, factor and cluster analysis. Results: this article considers the results of the empirical study conducted with the help of psycho-diagnostic methods aimed at identifying the level of self-development of future professionals, its structure and features. The scientifically valid results are obtained, allowing to identify the levels of self-development of students as well as to identify factors af

  14. The Classroom Environment Questionnaire (CEQ): Development and preliminary structural validity.

    Lyons, Carissa; Brown, Ted; Bourke-Taylor, Helen

    2018-04-16

    Occupational therapists offer a unique perspective regarding the contribution of the environment to occupational performance. Therefore, a scale that measures the unique characteristics of the primary school classroom environment where children complete their daily schoolwork occupations is needed. The aim of this study was to develop and psychometrically evaluate a new teacher-report questionnaire that measures a number of environmental characteristics of primary school classrooms. Participants (N = 117) completed the Classroom Environment Questionnaire (CEQ), which utilises a 4-point Likert scale where teachers rate 51 environmental characteristics of their classroom. Teachers also rate the extent to which they believe the physical, social, temporal, institutional and cultural classroom environmental domains contribute to students' schoolwork performance using a 10-point scale. The structural validity of the CEQ was examined using principal component analysis (PCA). Inter-item correlations were examined using Pearson r correlations, while the internal consistency of the CEQ was assessed using Cronbach's alpha. PCA revealed the CEQ to be multidimensional, with 31 items loading onto nine viable factors, representing the unique nature of classroom environments. Based on the PCA results, 20 items were removed from the CEQ. Cronbach's alpha and correlation analysis indicated that most CEQ subsections had acceptable internal consistency (alpha range 0.70-0.82), with four subsections demonstrating a lower level of internal consistency (alpha range 0.55-0.69). Preliminary structural validity and internal consistency analysis findings confirm that the CEQ has potential to be a useful scale for professionals wishing to examine the unique characteristics of primary school classrooms that influence the occupational performance of students. Ongoing analyses will be undertaken to further explore the CEQ's validity and reliability. © 2018 Occupational Therapy Australia.

  15. Development of manufacturing technology for ITER TF Coil Structure

    Sakurai, Takeru, E-mail: sakurai.takeru@jaea.go.jp; Iguchi, Masahide; Nakahira, Masataka; Inagaki, Takashi; Matsui, Kunihiro; Koizumi, Norikiyo

    2016-11-01

    Highlights: • Heavy thick welding (Max. 287 mm) was performed by balance welding. • Figured out Attachment welding deformation including heavy thick welding. • The deformation of Segments welding was suppressed to 1/3 of previous method. • Based on this study, JAEA started actual ITER TF coil structure manufacturing. - Abstract: Japan Atomic Energy Agency (JAEA) performed a trial of A1 Segment manufacturing of Toroidal Field (TF) coil structure, which is a piece with a radius of curvature 3 m with square channel for coil. Even though both-side welding (balance welding) was preferred to one-side welding considering the welding deformation, it could not be applied to the previous trial due to the difficulty of overhead or horizontal welding by machine. Hence, one-side welding with strong restriction jig was applied in the previous trials. In the latest trial, JAEA adopted a manual balance welding with a development of manufacturing technology. As the result of A1 Segment Mainbody welding trial, welding deformation of the Outer Plate and the Side Plate could have been controlled closer to the target value. JAEA also tried Attachments welding, in which Pre-Compression Flange (PCF) and Extension are welded to A1 Segment Mainbody, and a Segments welding trial, which is a weld between A1 Segment and a part of A2 Segment. A2 Segment is a 3 m straight part with square channel for coil. The inclination of A1 Segment and A2 Segment due to the welding was 2.7 mm. By applying balance welding, the deformation by Segments welding was suppressed to about 1/3 of the one-side welding. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization.

  16. Liquid metal systems development: reactor vessel support structure evaluation

    McEdwards, J.A.

    1981-01-01

    Results of an evaluation of support structures for the reactor vessel are reported. The U ring, box ring, integral ring, tee ring and tangential beam supports were investigated. The U ring is the recommended vessel support structure configuration

  17. COINCO Strategy 2025 - Discussion Paper

    Jespersen, Per Homann; Jensen, Anne; Stroschein, Christoph

     The regions and cities in the COINCO-corridor Oslo-Göteborg-Malmö-Copenhagen-Berlin have worked out a strategy proposal which is presented in this discussion paper. Behind the strategy is a political will to utilize mutual strengths and together become a leading player in a globalized world, based...... on matters essential to development - ‘hard' issues such as transport infrastructure and ‘soft' issues on improving cooperation within business, administration and knowledge production. The synergy of COINCO will have to come from collaboration among businesses. Supporting cooperation between existing...... to be institutionally supported. Therefore a number of knowledge institutions have to be formed organized around the ‘triple helix'-principle - a tight collaboration between business, administration and knowledge producers, especially universities. Also new ways of collaboration have to be explored - ‘network...

  18. Structuring Ethical Interpretations of the Sustainable Development Goals—Concepts, Implications and Progress

    Martina Keitsch

    2018-03-01

    Full Text Available The Sustainable Development Goals (SDGs, like the sustainable development (SD concept itself, are open to multifaceted interpretations, and the same is true for their ethical implications. While SDG values are widely accepted as universal, the ethical structure of the SDGs is complex, with differing interpretations and ideas, e.g., on how to regard and value nature. This article is a conceptual attempt to clarify and structure ethical interpretations based on an environmental ethics framework consisting of two branches: anthropocentrism and biocentrism. The aim is to provide an overview of SDG positions and locate them in the wider field of environmental ethics, addressing the human–nature relationship as a recurring topic in the SDGs. Section 1 of this article presents environmental ethics and briefly discusses anthropocentrism and biocentrism. Section 2 outlines ethical similarities of SD and the SDGs and locates representative SDG interpretations within the environmental ethics framework. Section 3 summarizes findings and suggests a possibility of integrating biocentrism and anthropocentrism with regard to the further interpretation and discussion of SDG ethics. Insights from this article will aid researchers in adopting a better overview on ethical positions in the SDG debate.

  19. Market structure, industrial organisation and technological development: the case of the Japanese electronics-based nc-machine tool industry.

    Watanabe, S

    1983-01-01

    ILO pub-WEP pub. Working paper on the impact of market structure and business organization on technological change in the automatic control machine tool industry in Japan - based on a 1982 sample survey of 40 industrial enterprises, discusses research and development trends, demand, production, subcontracting, competition, etc.; investigates the impact of electronics Innovation on small scale industry, the international division of labour and on developing countries. Bibliography and graphs.

  20. Development of an ultrasonic nondestructive inspection method for impact damage detection in composite aircraft structures

    Capriotti, M.; Kim, H. E.; Lanza di Scalea, F.; Kim, H.

    2017-04-01

    High Energy Wide Area Blunt Impact (HEWABI) due to ground service equipment can often occur in aircraft structures causing major damages. These Wide Area Impact Damages (WAID) can affect the internal components of the structure, hence are usually not visible nor detectable by typical one-sided NDE techniques and can easily compromise the structural safety of the aircraft. In this study, the development of an NDI method is presented together with its application to impacted aircraft frames. The HEWABI from a typical ground service scenario has been previously tested and the desired type of damages have been generated, so that the aircraft panels could become representative study cases. The need of the aircraft industry for a rapid, ramp-friendly system to detect such WAID is here approached with guided ultrasonic waves (GUW) and a scanning tool that accesses the whole structure from the exterior side only. The wide coverage of the specimen provided by GUW has been coupled to a differential detection approach and is aided by an outlier statistical analysis to be able to inspect and detect faults in the challenging composite material and complex structure. The results will be presented and discussed with respect to the detection capability of the system and its response to the different damage types. Receiving Operating Characteristics curves (ROC) are also produced to quantify and assess the performance of the proposed method. Ongoing work is currently aimed at the penetration of the inner components of the structure, such as shear ties and C-frames, exploiting different frequency ranges and signal processing techniques. From the hardware and tool development side, different transducers and coupling methods, such as air-coupled transducers, are under investigation together with the design of a more suitable scanning technique.

  1. Recent developments of the NESSUS probabilistic structural analysis computer program

    Millwater, H.; Wu, Y.-T.; Torng, T.; Thacker, B.; Riha, D.; Leung, C. P.

    1992-01-01

    The NESSUS probabilistic structural analysis computer program combines state-of-the-art probabilistic algorithms with general purpose structural analysis methods to compute the probabilistic response and the reliability of engineering structures. Uncertainty in loading, material properties, geometry, boundary conditions and initial conditions can be simulated. The structural analysis methods include nonlinear finite element and boundary element methods. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. The scope of the code has recently been expanded to include probabilistic life and fatigue prediction of structures in terms of component and system reliability and risk analysis of structures considering cost of failure. The code is currently being extended to structural reliability considering progressive crack propagation. Several examples are presented to demonstrate the new capabilities.

  2. The Development of Layered Photonic Band Gap Structures Using a Micro-Transfer Molding Technique

    Kevin Jerome Sutherland

    2001-01-01

    Photonic band gap (PBG) crystals are periodic dielectric structures that manipulate electromagnetic radiation in a manner similar to semiconductor devices manipulating electrons. Whereas a semiconductor material exhibits an electronic band gap in which electrons cannot exist, similarly, a photonic crystal containing a photonic band gap does not allow the propagation of specific frequencies of electromagnetic radiation. This phenomenon results from the destructive Bragg diffraction interference that a wave propagating at a specific frequency will experience because of the periodic change in dielectric permitivity. This gives rise to a variety of optical applications for improving the efficiency and effectiveness of opto-electronic devices. These applications are reviewed later. Several methods are currently used to fabricate photonic crystals, which are also discussed in detail. This research involves a layer-by-layer micro-transfer molding ((mu)TM) and stacking method to create three-dimensional FCC structures of epoxy or titania. The structures, once reduced significantly in size can be infiltrated with an organic gain media and stacked on a semiconductor to improve the efficiency of an electronically pumped light-emitting diode. Photonic band gap structures have been proven to effectively create a band gap for certain frequencies of electro-magnetic radiation in the microwave and near-infrared ranges. The objective of this research project was originally two-fold: to fabricate a three dimensional (3-D) structure of a size scaled to prohibit electromagnetic propagation within the visible wavelength range, and then to characterize that structure using laser dye emission spectra. As a master mold has not yet been developed for the micro transfer molding technique in the visible range, the research was limited to scaling down the length scale as much as possible with the current available technology and characterizing these structures with other methods

  3. The Development of Layered Photonic Band Gap Structures Using a Micro-Transfer Molding Technique

    Sutherland, Kevin Jerome [Iowa State Univ., Ames, IA (United States)

    2001-01-01

    Photonic band gap (PBG) crystals are periodic dielectric structures that manipulate electromagnetic radiation in a manner similar to semiconductor devices manipulating electrons. Whereas a semiconductor material exhibits an electronic band gap in which electrons cannot exist, similarly, a photonic crystal containing a photonic band gap does not allow the propagation of specific frequencies of electromagnetic radiation. This phenomenon results from the destructive Bragg diffraction interference that a wave propagating at a specific frequency will experience because of the periodic change in dielectric permitivity. This gives rise to a variety of optical applications for improving the efficiency and effectiveness of opto-electronic devices. These applications are reviewed later. Several methods are currently used to fabricate photonic crystals, which are also discussed in detail. This research involves a layer-by-layer micro-transfer molding ({mu}TM) and stacking method to create three-dimensional FCC structures of epoxy or titania. The structures, once reduced significantly in size can be infiltrated with an organic gain media and stacked on a semiconductor to improve the efficiency of an electronically pumped light-emitting diode. Photonic band gap structures have been proven to effectively create a band gap for certain frequencies of electro-magnetic radiation in the microwave and near-infrared ranges. The objective of this research project was originally two-fold: to fabricate a three dimensional (3-D) structure of a size scaled to prohibit electromagnetic propagation within the visible wavelength range, and then to characterize that structure using laser dye emission spectra. As a master mold has not yet been developed for the micro transfer molding technique in the visible range, the research was limited to scaling down the length scale as much as possible with the current available technology and characterizing these structures with other methods.

  4. A Lesson Plan to Develop Structured Discussion of the Benefits and Disadvantages of Selected Plastics Using the Product-Testing Method

    Burmeister, Mareike; Eilks, Ingo

    2014-01-01

    People use many different products made from plastics every day. But conventional plastics such as polyvinyl chloride (PVC) do not always have a good reputation in society at large. Bioplastics such as thermoplastic starch (TPS) promise to be better alternatives but are they really better than conventional plastics? This article presents a new…

  5. Consultant radiographer leadership - A discussion

    Hogg, Peter; Hogg, Dianne; Henwood, Suzanne

    2008-01-01

    Effective leadership can be defined in many ways and is an essential element of successful organisations; poor leadership can result in problems such as low staff morale, high staff turnover and reduced productivity. Effective leadership behaviours are well documented in the literature and various leadership models have been proposed that illustrate these behaviours. This discussion paper does not focus on any particular model. Instead it considers the 'Leadership Qualities Framework' which was developed specifically for use within the UK National Health Service. This framework draws upon a range of leadership models and as such it gives a broad indication of leadership behaviours. The framework comprises three components - 'personal qualities', 'setting direction' and 'delivering the service'. This paper commences with an argument as to why effective leadership is important in organisations generally, and specifically within healthcare organisations. Various examples of leadership are illustrated from within and outside the NHS in order to demonstrate effective leadership behaviours. The Leadership Qualities Framework is then examined, along with scenarios to illustrate effective leadership behaviours in context (i.e. within a healthcare organisation). Subsequent reflections on the scenarios aim to identify leadership behaviours that are explained within the framework. The final element of this paper draws on [limited] published evidence of where consultant radiographers have demonstrated effective leadership behaviours. In this section the published evidence is examined and reflected upon. At the end of the article we indicate additional reading for those who wish to further develop their theoretical and practical leadership skills

  6. Foreign Banking in Ukraine: Development Trends and Ownership Structure Regulation

    Serhij Reverchuk

    2015-10-01

    Full Text Available The purpose of the article is to research the theoretical and practical aspects of foreign participation ownership structure of banks in Ukraine; to analyze the tendencies and challenges of structure regulation of bank ownership; to provide recommendations related to the role of enhancing the transparency of banking business. This research was conducted by way of review of the data on bank ownership and the regulation of the ownership structure of the banking sector in Ukraine.

  7. Structure and agency in development-induced forced migration: the case of Brazil's Belo Monte Dam.

    Randell, Heather

    2016-03-01

    This paper examines how structure and agency interact to shape forced migration outcomes. Specifically, I ask how structural factors such as compensation policies as well as social, financial, and human capital may either foster or constrain migration aspirations and capabilities. I use longitudinal, semi-structured interview data to study forced migration among farmers displaced by the Belo Monte Dam in the Brazilian Amazon. Results from baseline interviews indicate that nearly all community members aspired to purchase rural land in the region and maintain livelihoods as cacao farmers or cattle ranchers. Constraints limiting the ability to attain aspirations included strict requirements on land titles for properties, delays in receiving compensation, rising land prices, and the lack of power to negotiate for better compensation. Despite these constraints, most migrants succeeded in attaining aspirations, as they were able to mobilize resources such as social networks, financial capital, skills, and knowledge. These findings highlight the importance of considering the relationship between structure and agency within forced migration research. I conclude by discussing how the findings may inform resettlement policies for future cases of development- or environment-induced forced migration.

  8. Mock-up development of new warship protective armor structure and feasibility analysis of ship installation

    ZHENG Pan

    2017-05-01

    Full Text Available To ensure the installation of the new design of protective armor structure on larger warships,a study into the installation process of the structure of this armor is carried out to improve installation efficiency and ensure the protective effect. This paper proposes a typical composite armor structure design which is composed of ‘silicate aerogel/ballistic ceramic/high-strength polyethylene/silicate aerogel’. The study analyzes the modeling design,down-selection of materials and equipment,and real ship mock-up technical development. The reliability and application of high strength polyethylene in response to high temperatures in the real ship installation process is discussed. The results show that high-temperatures during welding have no negative impact on the high strength polyethylene of the armored structure. The design demonstrates that this installation process is feasible and can be provided as an alternative solution by virtues of its good maneuverability,controllable precision,checkable quality and high reliability.

  9. Esau's Plant anatomy: meristems, cells, and tissues of the plant body : their structure, function, and development

    Evert, Ray Franklin; Esau, Katherine; Eichhorn, Susan E

    2006-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Chapter 1 Structure and Development of the Plant Body- An Overview . . . . . . . . . . . . . . . . . . . . . . . . 1 Internal Organization of the Plant Body...

  10. Asymmetric larval head and mandibles of Hydrophilus acuminatus (Insecta: Coleoptera, Hydrophilidae): Fine structure and embryonic development.

    Sato, Shun'ichi; Inoda, Toshio; Niitsu, Shuhei; Kubota, Souichirou; Goto, Yuji; Kobayashi, Yukimasa

    2017-11-01

    The larvae of a water scavenger beetle, Hydrophilus acuminatus, have strongly asymmetric mandibles; the right one is long and slender, whereas the left one is short and stout. The fine structure and embryonic development of the head capsule and mandibles of this species were examined using light and scanning electron microscopy, and asymmetries in shape were detected in these structures applying an elliptic Fourier analysis. The larval mandibles are asymmetric in the following aspects: whole length, the number, structure and arrangement of retinacula (inner teeth), and size and shape of both the molar and incisor regions. The larval head is also asymmetric; the left half of the head capsule is larger than the right, and the left adductor muscle of the mandible is much thicker than the right. The origin and developmental process of asymmetric mandibles were traced in developing embryos whose developmental period is about 270 h and divided into 10 stages. Mandibular asymmetries are produced by the cumulative effects of six stepwise modifications that occur from about 36% of the total developmental time onward. The significance of these modifications was discussed with respect to the functional advantages of asymmetries and the phylogeny of members of the Hydrophilidae. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Cultural order and participatory local development: structure for the occupational therapist practice

    Ricardo Lopes Correia

    2016-01-01

    Full Text Available The Cultural Order is understood as the expression of a game of interdependencies determinations between local and global social groups, pairs identified by productions, values and behavior that consciously guide the life projects and the expansion of a collective freedom. Based on a Social Science research and with theoretical mark of Nobert Elias and Amartya Sen, this article aims to present a theoretical-practice structure of the approach in participatory local development- PLD to the occupational therapist surround by the construction of collective life projects, in order to operationalize in the practice of the community question, understood as the strengths that singularize the participation. We discuss the use of the PLD approach to the occupational therapist in a flexible structure, aiming to guarantee its domain, the Human Occupation, and the set of interventions, technologies, sustained in the management of the activities of daily living. The approach in participatory local development presents itself as an important structural outline to the community actions, and it is the occupational therapist role to be an articulator of the Local Cultural Order dimensions, to deal with the target population their work processes of continuity in collective life projects and expansion of freedom.

  12. Development of Fluid and I and C Systems Design Technology for LMR - Development of mechanical structure design technology for LMR

    Lee, Jae Han; Joo, Young Sang; Lee, Hueong Yeon and others

    2005-03-01

    The key research items during the fiscal years of Phase 3 of the mechanical design technology development for liquid metal reactor are described. The objective of this project is to develop the design technology for the mechanical system of 600MWe, pool type liquid metal reactor with sodium coolant, and the structural integrity evaluation technology for mechanical system of the reactor system, structures and equipments. In the design technology development for mechanical structures, the reactor internal structures, reactor head and piping system, reactor containment structures have been studied, and new structural concepts compatible with the new reactor have been proposed. The thermal protection devices of reactor vessel and the refueling system have been conceptually established and the feasibility study for 3-D seismic isolation of reactor building was performed. The structural damage detection technology for reactor internal structures has been studied and its application has been confirmed. In the structural integrity evaluation technology development, the sensitivities of material constants for inelastic analysis codes have been studied and the applicabilities of the developed codes are enhanced. The high temperature creep-fatigue structural behavior test has been conducted so that high temperature structural damage test and evaluation technology were ensured at first in domestic. The high temperature seismic buckling analysis method to evaluate the buckling of thin reactor shell structure under the transient thermal load was established. In addition, the core seismic response analysis code reflected the fluid effect of core was developed and its accuracy was confirmed with a scale-down model test

  13. Inter-ELM pedestal structure development in ASDEX upgrade

    Laggner, Florian Martin

    2017-06-15

    The performance of a magnetically confined, fusion plasma is strongly impacted by the plasma edge, which is the boundary between the hot, confined plasma and the reactor walls. In a tokamak, which uses a toroidally axis-symmetric magnetic field configuration, a regime of improved plasma confinement, the high confinement mode (H-mode), has been observed. The confinement improvement originates from an edge transport barrier (ETB), which is accompanied by steep gradients of the plasma pressure, named pedestal. The maximum sustainable pedestal, i.e. the maximum pressure gradient, is usually set by an ideal magnetohydrodynamic limit, which if exceeded is leading to edge localised modes (ELMs). ELMs are instabilities that relax the pedestal and lead to a loss of the order of 10% from the plasma stored energy. The mechanisms, which set the pedestal structure before an ELM crash, keeping the pedestal stable up to this point, are not fully understood. Here, microturbulent instabilities, e.g. kinetic ballooning modes (KBMs), are expected to play an important role. The presented PhD thesis investigates the temporal development of the pedestal density and temperature profiles in between ELM crashes at the ASDEX Upgrade tokamak. The aims were comparisons of different plasma conditions, i.e. plasma collisionality (ν{sup *}), main isotope species and plasma shapes. Further, the impact of the conditions outside the confined plasma on the pedestal development was investigated. The extensive study of these parameters resulted in one key observation: The pedestal recovers in distinct phases in between ELM crashes with always the same sequence. Immediately after the ELM crash, the electron density (n{sub e}) pedestal is established, followed by the electron temperature (T{sub e}) pedestal. Finally, a period with constant pressure gradient appears, which can vary in duration. For a large range of ν{sup *} it has been found that the onset of radial magnetic fluctuations with

  14. The impact of structural development on near bed flow dynamics in gravel bed rivers: coupling flume experiments with numerical modelling

    Ockelford, A.; Hardy, R. J.; Rice, S. P.; Powell, M.

    2017-12-01

    It is increasingly being recognised that gravel bed rivers develop a surface `texture' in response to changes in the flow and sediment regime. This textural response often takes the form of a bed structure which develops to ultimately stabilise the surface across a range of spatio-temporal scales and it is these topographical structures which determine the flow structures that develop over the river bed. However, our ability to measure and parameterise that structure in ways that are useful and meaningful for the prediction of flow dynamics, still remains inadequate; this paper uses a three dimensional numerical model to assess how the temporal development of structure influences the near bed flow dynamics. Using a suite of flume based experiments a unimodal grain size distribution (σg = 1.30, D50 = 8.8mm) was exposed to three different levels of constant bed shear that produced sediment transport conditions ranging from marginal transport to conditions approaching full mobility of all size fractions. Surface structuring characteristics were measured at a high spatio-temporal resolution such that the time evolution of the beds could be fully described. In total 54 surfaces were generated and run through a Reynolds averaged three dimensional numerical model with an Rng turbulence closure. The topography input included using an immersed boundary technique within a Cartesian framework. Discussion concentrates on the how the trajectory of structural evolution under the different treatments affects the near bed flow dynamics. Specifically links are made between how the scales of boundary topography influence the flow and discusses how the measured flow variability at any one point will contain both locally derived and upstream-inherited flow structures, according to the range of scales of bed topography present. Keywords: Graded, Sediment, Structure, Turbulence, Modelling

  15. Some Recent Developments in Structure and Glassy Behavior of Proteins

    Hu, Chin-Kun

    2012-02-01

    We have used ARVO developed by us to find that the ratio of volume and surface area of proteins in Protein Data Bank distributed in a very narrow region [1]. Such result is useful for the determination of protein 3D structures. It has been widely known that a spin glass model can be used to understand the slow relaxation behavior of a glass at low temperatures [2]. We have used molecular dynamics and simple models of polymer chains to study relaxation and aggregation of proteins under various conditions and found that polymer chains with neighboring monomers connected by rigid bonds can relax very slowly and show glassy behavior [3]. We have also found that native collagen fibrils show glassy behavior at room temperatures [4]. The results of [3] and [4] about the glassy behavior of polymers or proteins are useful for understanding the mechanism for a biological system to maintain in a non-equilibrium state, including the ancient seed [5], which can maintain in a non-equilibrium state for a very long time. (1) M.-C. Wu, M. S. Li, W.-J. Ma, M. Kouza, and C.-K. Hu, EPL, in press (2011); (2) C. Dasgupta, S.-K. Ma, and C.-K. Hu. Phys. Rev. B 20, 3837-3849 (1979); (3) W.-J. Ma and C.-K. Hu, J. Phys. Soc. Japan 79, 024005, 024006, 054001, and 104002 (2010), C.-K. Hu and W.-J. Ma, Prog. Theor. Phys. Supp. 184, 369 (2010); S. G. Gevorkian, A. E. Allahverdyan, D. S. Gevorgyan and C.-K. Hu, EPL 95, 23001 (2011); S. Sallon, et al. Science 320, 1464 (2008).

  16. Structured Interviews: Developing Interviewing Skills in Human Resource Management Courses

    Doll, Jessica L.

    2018-01-01

    Structured interviews are widely used in the employment process; however, students often have little experience asking and responding to structured interview questions. In a format similar to "speed dating," this exercise actively engages students in the interview process. Students pair off to gain experience as an interviewer by asking…

  17. Child Development and Structural Variation in the Human Genome

    Zhang, Ying; Haraksingh, Rajini; Grubert, Fabian; Abyzov, Alexej; Gerstein, Mark; Weissman, Sherman; Urban, Alexander E.

    2013-01-01

    Structural variation of the human genome sequence is the insertion, deletion, or rearrangement of stretches of DNA sequence sized from around 1,000 to millions of base pairs. Over the past few years, structural variation has been shown to be far more common in human genomes than previously thought. Very little is currently known about the effects…

  18. To discuss illicit nuclear trafficking

    Balatsky, Galya I [Los Alamos National Laboratory; Severe, William R [Los Alamos National Laboratory; Wallace, Richard K [Los Alamos National Laboratory

    2010-01-01

    The Illicit nuclear trafficking panel was conducted at the 4th Annual INMM workshop on Reducing the Risk from Radioactive and Nuclear Materials on February 2-3, 2010 in Washington DC. While the workshop occurred prior to the Nuclear Security Summit, April 12-13 2010 in Washington DC, some of the summit issues were raised during the workshop. The Communique of the Washington Nuclear Security Summit stated that 'Nuclear terrorism is one of the most challenging threats to international security, and strong nuclear security measures are the most effective means to prevent terrorists, criminals, or other unauthorized actors from acquiring nuclear materials.' The Illicit Trafficking panel is one means to strengthen nuclear security and cooperation at bilateral, regional and multilateral levels. Such a panel promotes nuclear security culture through technology development, human resources development, education and training. It is a tool which stresses the importance of international cooperation and coordination of assistance to improve efforts to prevent and respond to incidents of illicit nuclear trafficking. Illicit trafficking panel included representatives from US government, an international organization (IAEA), private industry and a non-governmental organization to discuss illicit nuclear trafficking issues. The focus of discussions was on best practices and challenges for addressing illicit nuclear trafficking. Terrorism connection. Workshop discussions pointed out the identification of terrorist connections with several trafficking incidents. Several trafficking cases involved real buyers (as opposed to undercover law enforcement agents) and there have been reports identifying individuals associated with terrorist organizations as prospective plutonium buyers. Some specific groups have been identified that consistently search for materials to buy on the black market, but no criminal groups were identified that specialize in nuclear materials or isotope

  19. Development of Structural Core Components for Breeder Reactors

    Saibaba, N.

    2013-01-01

    Core structural materials: • The desire is to have only fuel in the core, structural material form 25% of the total core: – To support and to retain the fuel in position; – Provide necessary ducts to make coolant flow through & transfer/remove heat. • For 500 MWe FBR with Oxide fuel (Peak Linear Power 450 W/cm), total fuel pins required in the core are of the order 39277 pins (both inner & outer core Fuel SA); • Considering 217 pins/Fuel SA there are 181 Fuel SA wrapper tubes • These structural materials see hostile core with max temperature and neutron flux

  20. Development of a set of process and structure indicators for palliative care: the Europall project

    Woitha Kathrin

    2012-11-01

    Full Text Available Abstract Background By measuring the quality of the organisation of palliative care with process and structure quality indicators (QIs, patients, caregivers and policy makers are able to monitor to what extent recommendations are met, like those of the council of the WHO on palliative care and guidelines. This will support the implementation of public programmes, and will enable comparisons between organisations or countries. Methods As no European set of indicators for the organisation of palliative care existed, such a set of QIs was developed. An update of a previous systematic review was made and extended with more databases and grey literature. In two project meetings with practitioners and experts in palliative care the development process of a QI set was finalised and the QIs were categorized in a framework, covering the recommendations of the Council of Europe. Results The searches resulted in 151 structure and process indicators, which were discussed in steering group meetings. Of those QIs, 110 were eligible for the final framework. Conclusions We developed the first set of QIs for the organisation of palliative care. This article is the first step in a multi step project to identify, validate and pilot QIs.

  1. Consultant radiographer leadership - A discussion

    Hogg, Peter [Directorate of Radiography, University of Salford, Allerton Building, Frederick Road, Salford, Greater Manchester M6 6PU (United Kingdom)], E-mail: p.hogg@salford.ac.uk; Hogg, Dianne [Henwood Associates (South East) Ltd, Company Number: 513796, Registered Office: 2 Lakeview Stables, Lower St Clere, Kemsing, Kent, TN15 6NL (United Kingdom); Henwood, Suzanne [East Lancashire Primary Care Trust, Linden Business Centre, Linden Road, Colne. BB8 9BA (United Kingdom)

    2008-12-15

    Effective leadership can be defined in many ways and is an essential element of successful organisations; poor leadership can result in problems such as low staff morale, high staff turnover and reduced productivity. Effective leadership behaviours are well documented in the literature and various leadership models have been proposed that illustrate these behaviours. This discussion paper does not focus on any particular model. Instead it considers the 'Leadership Qualities Framework' which was developed specifically for use within the UK National Health Service. This framework draws upon a range of leadership models and as such it gives a broad indication of leadership behaviours. The framework comprises three components - 'personal qualities', 'setting direction' and 'delivering the service'. This paper commences with an argument as to why effective leadership is important in organisations generally, and specifically within healthcare organisations. Various examples of leadership are illustrated from within and outside the NHS in order to demonstrate effective leadership behaviours. The Leadership Qualities Framework is then examined, along with scenarios to illustrate effective leadership behaviours in context (i.e. within a healthcare organisation). Subsequent reflections on the scenarios aim to identify leadership behaviours that are explained within the framework. The final element of this paper draws on [limited] published evidence of where consultant radiographers have demonstrated effective leadership behaviours. In this section the published evidence is examined and reflected upon. At the end of the article we indicate additional reading for those who wish to further develop their theoretical and practical leadership skills.

  2. Advanced damped detuned structure (DDS) development at SLAC

    Jones, R.M.; Kroll, N.M.; Miller, R.H.; Ruth, R.D.; Wang, J.W.

    1997-05-01

    The first damped detuned accelerator structure, DDS 1, has been built, tested in the ASSET experiment, and installed in the NLCTA. The planning and construction of a series of further structures, incorporating some modifications, is under way. DDS 2, 3, and 4 all incorporate the same basic design as DDS 1. The manifold design for the last 5 % of the downstream end of the structure has been modified to accommodate improvements in the manifold loads. Calculations based on the spectral function method indicate, on average, a factor two or better reduction in the long range wake. Modest modifications in the distribution of geometrical detuning parameters along the structure which, according to calculations based on spectral function theory, significantly improve the short range wake will be incorporated in DDS 3 and 4. The basic cell configuration will be redesigned in DDS 5 with the intention of improving shunt impedance as well as incorporating further improvements in the wake

  3. Lithological and Structural Controls on the Development of Aquifer ...

    Bheema

    Research Article ... Based on borehole and structure data presence of multilayer aquifers, their .... Shape of the clasts varies from angular, elliptical and ..... Water quality investigation (i.e. for domestic purpose) is also recommended. 6.

  4. Development of Morphing Structures for Aircraft Using Shape Memory Polymers

    Khan, Fazeel J

    2008-01-01

    ...), aerospace structures. In particular, shape memory polymers (SMP) in filled and unfilled form have been investigated with particular emphasis on the recovery time and force as the materials undergo transformation...

  5. Development of the tube bundle structure for fluid-structure interaction analysis model - Intermediate Report -

    Yoon, Kyung Ho; Kim, Jae Yong; Lee, Kang Hee; Lee, Young Ho; Kim, Hyung Kyu

    2009-07-01

    Tube bundle structures within a Boiler or heat exchanger are laid the fluid-structure, thermal-structure and fluid-thermal-structure coupled boundary condition. In these complicated boundary conditions, Fluid-structure interaction (FSI) occurs when fluid flow causes deformation of the structure. This deformation, in turn, changes the boundary conditions for the fluid flow. The structural analysis have been executed as follows. First of all, divide the fluid and structural analysis discipline, and then independently analyzed each other. However, the fluid dynamic force effect the behavior of the structure, and the vibration amplitude of the structure to fluid. FSI analysis model was separately created fluid and structure model, and then defined the fsi boundary condition, and simultaneously analyzed in one domain. The analysis results were compared with those of the experimental method for validating the analysis model. Flow-induced vibration test was executed with single rod configuration. The vibration amplitudes of a fuel rod were measured by the laser vibro-meter system in x and y-direction. The analyses results were not closely with the test data, but the trend was very similar with the test result. In fsi coupled analysis case, the turbulent model was very important with the reliability of the accuracy of the analysis model. Therefore, the analysis model will be needed to further study

  6. DEVELOPMENT OF STRUCTURES FROM SOLID WOOD FOR OBJECTS OF INFRASTRUCTURE

    Konstantin P. Pyatikrestovsky; Vladimir I. Travush; Alexander A. Pogoreltsev; Alexander A. Klyukin

    2018-01-01

    New prefabricated lightweight structures made of solid wood with connections for joining and building metal screws for wood are proposed. Manufacture and assembly of basic elements-bars with a cross-section of 15x15 cm can be carried out in line conditions on the simplest woodworking equipment. The use of local tim-ber material has a number of advantages (ecological, economic and operational). The description of structures with manufacturing process, examples of buildings with vaulted and hip...

  7. Market Structure in the Context of Developing Competitive Strategy

    Algirdas Krivka; Romualdas Ginevičius

    2011-01-01

    The abstract deals with the application of positioning strategies under the conditions of classical market structures. It is discovered that the assumptions of pure competition leave no space for M. Porter’s generic cost leadership and differentiation strategies to be applied. The enterprise’s actions, influencing five competitive forces and implementing generic strategies, are reasonable under the conditions of imperfect competition market structures. The game theory models, applied to oligo...

  8. Proceedings of a workshop on the development and evaluation of habitat suitability criteria: A compilation of papers and discussions presented at Colorado State University, Fort Collins, Colorado, December 8-12, 1986

    Bovee, Ken; Zuboy, J.R.

    1988-01-01

    The development of reliable habitat suitability criteria is critical to the successful implementation of the Instream Flow Incremental Methodology (IFIM), or any other habitat based evaluation technology. It is also a fascinating topic of research, for several reasons. First, the “science” of habitat quantification is relatively young. Descriptions of habitat use and partitioning can be traced back to Darwin, if not further. Attempts to actually quantify habitat use can be found predominantly during the last two decades, with most of the activity occurring in about the last five years. Second, this work is challenging because we are usually working with fish or some other organism that lives out of sight in an environment that is foreign to humans. Most of the data collection techniques that have been developed for standard fisheries work are unsuited, without modification, for criteria development. These factors make anyone involved in this type of research a pioneer, of sorts. Pioneers often make new and wonderful discoveries, but they also sometimes get lost. In our opinion, however, there is an even more rewarding aspect to criteria development research. It seems that the field of biology has tended to become increasingly clinical over the years. Criteria development demands the unobtrusive observation of organisms in their natural environment, a fact that allows the biological to be a naturalist and still get paid for it. The relative youth and importance of habitat quantification have resulted in rapid advancements in the state of the art. The expansion of methods is vividly demonstrated simply by comparing the two Instream Flow Information Papers written on the subject in 1978 and in 1986. One of the missions of the Aquatic Systems Branch (formerly the Instream Flow Group) is to serve as a clearinghouse for new techniques and methods. In keeping with this role, a workshop was conducted during December 1986 to discuss current and newly evolving methods

  9. The influence of sediment transport rate on the development of structure in gravel bed rivers

    Ockelford, Annie; Rice, Steve; Powell, Mark; Reid, Ian; Nguyen, Thao; Tate, Nick; Wood, Jo

    2013-04-01

    Although adjustments of surface grain size are known to be strongly influenced by sediment transport rate little work has systematically explored how different transport rates can affect the development of surface structure in gravel bed rivers. Specifically, it has been well established that the transport of mixed sized sediments leads to the development of a coarser surface or armour layer which occurs over larger areas of the gravel bed. Armour layer development is known to moderate overall sediment transport rate as well as being extremely sensitive to changes in applied shear stress. However, during this armouring process a bed is created where, smaller gain scale changes, to the bed surface are also apparent such as the development of pebble clusters and imbricate structures. Although these smaller scale changes affect the overall surface grain size distribution very little their presence has the ability to significantly increase the surface stability and hence alter overall sediment transport rates. Consequently, the interplay between the moderation of transport rate as a function of surface coarsening at a larger scale and moderation of transport rate as a function of the development of structure on the bed surface at the smaller scale is complicated and warrants further investigation. During experiments a unimodal grain size distribution (σg = 1.30, D50 = 8.8mm) was exposed to 3 different levels of constant discharge that produced sediment transport conditions ranging from marginal transport to conditions approaching full mobility of all size fractions. Sediment was re-circulated during the experiments surface grain size distribution bed load and fractional transport rates were measured at a high temporal resolution such that the time evolution of the beds could be fully described. Discussion concentrates on analysing the effects of the evolving bed condition sediment transport rate (capacity) and transported grain size (competence). The outcome of this

  10. Development of building envelope structures; Udvikling af klimaskaermskonstruktioner

    Monefeldt Tommerup, H. [Danmarks Tekniske Univ., Lyngby (Denmark); Munch-Andersen, J. [Statens Byggeforskningsinstitut, Hoersholm (Denmark); Kjaer Esbensen, P. [Danmarks Tekniske Univ., Lyngby (Denmark)

    2000-08-01

    The present report concludes the work concerning the development of building envelope constructions, which can form the basis of new buildings with considerably less heat demand than in the present building regulations. It has been made probable that it is technically possible to build exterior walls with less heat loss than those just complying with the requirements of the current building regulations with no considerable added use of material apart from insulation. In their structure many of the shown constructions resemble types that are used today, while others presuppose that one part of the wall is attached to the other part or possibly to the rafters. Calculations concerning the importance of heat capacity for a 100 m{sup 2} single-family house have been made which confirm that by using heavy rather than light envelope constructions the reduction of the heating requirements is relatively small. Therefore optimisation of the insulation level can be carried out separately on the building components. A method has been developed for the evaluation of the optimum insulation level for the individual building components of the building envelope based on life cycle cost analysis. The method is based on making up the changes in the operational energy costs/ heating-costs and the cost of construction due to a change in the insulation thickness over a 30-year period. The life span of the primary parts of the building envelope is estimated at 100 years. It is assumed that the gross energy consumption that covers the heating requirements and the heat loss (determined by a simple calculation of degree days) changes concurrently with the change in the insulation thickness, which has been proved to be a reasonable approximation. The life cycle cost analysis has been carried out for a test-house of about 100 m{sup 2} and with two different energy price scenarios: 0.60 dkk/kWh (including taxes and VAT) which roughly corresponds to the present energy price level, and 1.20 dkk

  11. Achievement report on research and development in the Sunshine Project in fiscal 1976. Comprehensive discussion on hydrogen utilizing subsystems and research on peripheral technologies (Comprehensive discussion on hydrogen utilizing subsystems); 1976 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Suiso riyo subsystem no sogoteki kento

    NONE

    1977-03-01

    This paper describes comprehensive discussion on hydrogen utilizing subsystems. Hydrogen combustion is characterized by how low the ignition energy is, and how fast the flame propagates. In addition, flame stability is high also in diffusion combustion. However, the diffusion combustion produces a great amount of NOx, the amount varying depending on the degree of air pre-mixture. Since it causes reverse ignition very easily in the pre-mixture degree corresponding to low NOx zone, development of a burner with drastically new mechanism is demanded. In hydrogen fuel cells, the ratio of hydrogen fuel cost accounting for in the power generation cost is very high. As an automobile fuel, very much leaner combustion is possible than in conventional internal combustion engines, and ignition energy is small. However, such abnormal combustion as reverse ignition and early ignition may occur, and their prevention is an important assignment. Issues in aircraft engines are verification of safety, and cost of liquefied hydrogen. Steam turbines have reached their limit already, but gas turbines are expected of exciting efficiency improvement. This paper describes prospects on chemical utilization of hydrogen in the existing fields and new fields. (NEDO)

  12. Structural Development of Finnish Universities: Achieving Competitiveness and Academic Excellence

    Tirronen, Jarkko; Nokkala, Terhi

    2009-01-01

    This paper discusses strategic instruments that are used to enhance the competitiveness of Finnish universities in the context of globalisation, internationalisation and commercialisation of research and education. The Finnish higher education system is currently undergoing a major policy reform, which aims to enhance the competitiveness of…

  13. The structure and strength of public attitudes towards wind farm development

    Bidwell, David Charles

    A growing social science literature seeks to understand why, despite broad public support for wind energy, proposals for specific projects are often met with strong local opposition. This gap between general and specific attitudes is viewed as a significant obstacle to the deployment of wind energy technologies. This dissertation applies theoretical perspectives and methodological tools from social psychology to provide insights on the structure and strength of attitudes towards the potential development of commercial wind farm in three coastal areas of Michigan. A survey of attitudes was completed by 375 residents in these communities and structural equation modeling was used to explore the relationship among variables. The analysis found that attitudes towards wind farm development are shaped by anticipated economic benefits to the community, but expectations of economic benefit are driven by personal values. Social psychology has long recognized that all attitudes are not created equal. Weak attitudes are fleeting and prone to change, while strong attitudes are stable over time and resistant to change. There are two fundamental paths to strong attitudes: repeated experience with an attitude object or the application of deeply held principles or values to that object. Structural equation models were also used to understand the strength of attitudes among the survey respondents. Both the anticipated effects of wind farm development and personal values were found to influence the strength of attitudes towards wind farms. However, while expectations that wind farm development will have positive effects on the economy bolster two measures of attitude strength (collective identity and importance), these expectations are associated with a decline in a third measure (confidence). A follow-up survey asking identical questions was completed by completed by 187 respondents to the initial survey. Linear regressions models were used to determine the effects of attitude

  14. Development of the tube bundle structure for fluid-structure interaction analysis model

    Yoon, Kyung Ho; Kim, Jae Yong

    2010-02-01

    Tube bundle structures within a Boiler or heat exchanger are laid the fluid-structure, thermal-structure and fluid-thermal-structure coupled boundary condition. In these complicated boundary conditions, Fluid-structure interaction (FSI) occurs when fluid flow causes deformation of the structure. This deformation, in turn, changes the boundary conditions for the fluid flow. The structural analysis discipline, and then independently analyzed each other. However, the fluid dynamic force effect the behavior of the structure, and the vibration amplitude of the structure to fluid. FSI analysis model was separately created fluid and structure model, and then defined the fsi boundary condition, and simultaneously analyzed in one domain. The analysis results were compared with those of the experimental method for validating the analysis model. Flow-induced vibration test was executed with single rod configuration. The vibration amplitudes of a fuel rod were measured by the laser vibro-meter system in x and y-direction. The analyses results were not closely with the test data, but the trend was very similar with the test result. In fsi coupled analysis case, the turbulent model was very important with the reliability of the accuracy of the analysis model. Therefore, the analysis model will be needed to further study

  15. Decoupling of economic structures and transport. Example regional business development; Entkopplung von Wirtschaftswachstum und Verkehr. Beispiel Regionale Wirtschaftsfoerderung

    Petschow, Ulrich; Buchholz, Frank; Schaegner, Jan-Philipp; Sprenger, Rolf Ulrich [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

    2008-10-15

    The research project under consideration reports on three themes: (a) Contribution to more transparency in the discussion about the interactions between economic growth and transport development; (b) Development of approaches and design principles as a part of laws, regulations and frameworks for the decoupling of the two parameters; (c) Preparation of proposals for their political and administrative implementation. Selected instruments of regional development and economic development at the European, national and regional level were the main subject of research. The research focused on the strategic guidelines of the European Union. Furthermore, the research deals with the implementation of operational programs as instruments of the European Structural Funds and examines the development of the joint task 'Improvement of the regional economic structure'.

  16. Decoupling of economic structures and transport. Example regional business development; Entkopplung von Wirtschaftswachstum und Verkehr. Beispiel Regionale Wirtschaftsfoerderung

    Petschow, Ulrich; Buchholz, Frank; Schaegner, Jan-Philipp; Sprenger, Rolf Ulrich [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

    2008-10-15

    The research project under consideration reports on three themes: (a) Contribution to more transparency in the discussion about the interactions between economic growth and transport development; (b) Development of approaches and design principles as a part of laws, regulations and frameworks for the decoupling of the two parameters; (c) Preparation of proposals for their political and administrative implementation. Selected instruments of regional development and economic development at the European, national and regional level were the main subject of research. The research focused on the strategic guidelines of the European Union. Furthermore, the research deals with the implementation of operational programs as instruments of the European Structural Funds and examines the development of the joint task 'Improvement of the regional economic structure'.

  17. Discussion on Papers 11 - 13

    Haws, E.; Matthews, M.E.; Wilson, E.M.; Charles-Jones, S.; Allen, R.F.; Young, R.M.; O'Connor, B.

    1992-01-01

    The discussion covered the following topics: the nature of boulder clay for foundations; navigation through the barrage; the construction of sluice caissons; government subsidies for construction costs; the effect of wave action on river banks; allowances for reflected energy in hydrodynamic models; water quality in impounded pools; sediment deposition. Separate abstracts have been prepared for the three papers under discussion. (UK)

  18. Study on the Evolution Mechanism and Development Forecasting of China’s Power Supply Structure Clean Development

    Xiaohua Song

    2017-02-01

    Full Text Available The clean development of China’s power supply structure has become a crucial strategic problem for the low-carbon, green development of Chinese society. Considering the subsistent developments of optimized allocation of energy resources and efficient utilization, the urgent need to solve environmental pollution, and the continuously promoted power market-oriented reform, further study of China’s power structure clean development has certain theoretical value. Based on the data analysis, this paper analyzes the key factors that influence the evolution process of the structure with the help of system dynamics theory and carries out comprehensive assessments after the construction of the structure evaluation system. Additionally, a forecasting model of the power supply structure development based on the Vector Autoregressive Model (VAR has been put forward to forecast the future structure. Through the research of policy review and scenario analysis, the paths and directions of structure optimization are proposed. In this paper, the system dynamics, vector autoregressive model (VAR, policy mining, and scenario analysis methods are combined to systematically demonstrate the evolution of China’s power structure, and predict the future direction of development. This research may provide a methodological and practical reference for the analysis of China’s power supply structure optimization development and for theoretical studies.

  19. Developing a method of fabricating microchannels using plant root structure

    Nakashima, Shota; Tokumaru, Kazuki; Tsumori, Fujio

    2018-06-01

    Complicated three-dimensional (3D) microchannels are expected to be applied to a lab-on-a-chip, especially an organ-on-a-chip. There are fine microchannel networks such as blood vessels in a living organ. However, it is difficult to recreate the complicated 3D microchannels of real living structures. Plant roots have a similar structure to blood vessels. They spread radially and three-dimensionally, and become thinner as they branch. In this research, we propose a method of fabricating microchannels using a live plant root as a template to mimic a blood vessel structure. We grew a plant in ceramic slurry instead of soil. The slurry consists of ceramic powder, binder and water, so it plays a similar role to soil consisting of fine particles in water. After growing the plant, the roots inside the slurry were burned and a sintered ceramic body with channel structures was obtained by heating. We used two types of slurry with different composition ratios, and compared the internal channel structures before and after sintering.

  20. Development of deterioration models and tests of structural materials for nuclear containment structures(III)

    Oh, Byung Hwan [Seoul National University, Seoul (Korea)

    2002-03-01

    The nuclear containment structures are very important infrastructures which require much cost for construction and maintenance. If these structures lose their functions and do not ensure their safety, great losses of human lives and properties will result. Therefore, the nuclear containment structures should secure appropriate safety and functions during these service lives. The nuclear concrete structures start to experience deterioration due to severe environmental condition, even though the concrete structures exhibit generally superior durability. It is, therefore, necessary to take appropriate actions at each stage of planning, design and construction to secure safety and functionability. Thorough examination of deterioration mechanism and comprehensive tests have been conducted to explore the durability characteristics of nuclear concrete structures. 88 refs., 70 figs., 12 tabs. (Author)

  1. Emotional discussions reduce memory recall.

    Soleti, Emanuela; Wright, Daniel B; Curci, Antonietta

    2017-05-01

    People often discuss events they have seen and these discussions can influence later recollections. We investigated the effects of factual, emotional, and free retelling discussion on memory recollections of individuals who have witnessed an event. Participants were shown a video, made an initial individual recall, participated in one of the three retelling conditions (emotional versus factual versus free) or a control condition, and then recalled the event individually again. Participants in the factual and free retelling conditions reported more items not previously recalled than participants in the control condition did, while the emotional condition did not show the same advantage. Participants in all three retelling conditions failed to report more previously recalled items as compared with the control condition. Finally, a memory conformity effect was observed for all three retelling conditions. These findings suggest that eyewitnesses' discussions may influence the accuracy of subsequent memory reports, especially when these discussions are focused on emotional details and thoughts.

  2. Development of a structural model for the nonlinear shear deformation behavior of a seismic isolator

    Lee, Jae Han; Koo, Gyeong Hoi; Yoo, Bong

    2002-02-01

    The seismic excitation test results of an isolated test structure for artificial time history excitation are summarized for structure models of the isolated structure and isolation bearing. To simulate the response characteristic of isolated structure, shear hysteresis curves of isolators are analyzed. A simple analysis model is developed representing the actual dynamic behaviors of the test model, and the seismic responses using the simple model of the isolated structure and structure models, which are developed such as linear and bilinear models for isolators, are performed and compared with those of the seismic tests. The developed bilinear model is well applicable only to large shear strain area of LLRB

  3. High-temperature-structural design and research and development for reactor system components

    Matsumura, Makoto; Hada, Mikio

    1985-01-01

    The design of reactor system components requires high-temperature-structural design guide with the consideration of the creep effect of materials related to research and development on structural design. The high-temperature-structural design guideline for the fast prototype reactor MONJU has been developed under the active leadership by Power Reactor and Nuclear Fuel Development Corporation and Toshiba has actively participated to this work with responsibility on in-vessel components, performing research and development programs. This paper reports the current status of high-temperature-structural-design-oriented research and development programs and development of analytical system including stress-evaluation program. (author)

  4. Effects of Tillage Model on Healthy Plough Layer Structure and Its Development Trends

    HU Jun-ming

    2018-02-01

    Full Text Available Soil cultivation is closely related to land productivity. Nutrient in plough layer is the key factor affecting the absorption and utilization of crop nutrients. Good plough layer structure is beneficial to the coordination of water, fertilizer, gas and heat. The depth of arable layer is related to tillage methods. Constructing good plough layer structure is conducive to crop growth and distribution. This paper reviewed both domestic and foreign researches regarding tillage models, which included conventional tillage, protective cultivation, rotary tillage, deep tillage, and so on. Based on the above research results, the effects of tillage models on the healthy soil layer construction were discussed from the soil bulk density, soil porosity, soil aggregates, infiltration of soil, soil heavy metals, soil respiration and the characters of root system. The deficiencies of current research were pointed out from several aspects such as tillage system, system positioning, tillage efficiency, suitable crop. In order to maximize the comprehensive production capacity of cultivated land resources and solve the contradiction between human being and land, this paper forecasted the development trend of ideal plough layer structure from four aspects:Cultivate patterns according to local conditions, the establishment of complex farming models, accelerating the research and application of new agricultural machinery, conducting systematic research of farmland microclimate environment. This will provide the theoretical basis and technical support for the optimal farming mode in agricultural production.

  5. Significance of Wheat Flour Dough Rheology to Gas Cell Structure Development in Bread and Other Baked Products

    Engmann, Jan

    2008-07-01

    We discuss which rheological material functions of wheat flour dough are most relevant for structure development in baked products under common processing conditions. We consider the growth of gas cells during dough proofing (driven by yeast) and during baking, where the growth is driven by a combination of CO2 desorption, water and ethanol evaporation, and thermal expansion of gas. Attention is given to upper limits on biaxial extension rate and stress and the consequences for the required rheological material functions. The applicability of the "Considère criterion" to predict the probability of coalescence between gas cells and its effect on loaf aeration is briefly discussed.

  6. Photogrammetry and Videogrammetry Methods Development for Solar Sail Structures. Masters Thesis awarded by George Washington Univ.

    Pappa, Richard S. (Technical Monitor); Black, Jonathan T.

    2003-01-01

    This report discusses the development and application of metrology methods called photogrammetry and videogrammetry that make accurate measurements from photographs. These methods have been adapted for the static and dynamic characterization of gossamer structures, as four specific solar sail applications demonstrate. The applications prove that high-resolution, full-field, non-contact static measurements of solar sails using dot projection photogrammetry are possible as well as full-field, non-contact, dynamic characterization using dot projection videogrammetry. The accuracy of the measurement of the resonant frequencies and operating deflection shapes that were extracted surpassed expectations. While other non-contact measurement methods exist, they are not full-field and require significantly more time to take data.

  7. Design and development of a learning progression about stellar structure and evolution

    Arturo Colantonio

    2018-06-01

    Full Text Available [This paper is part of the Focused Collection on Astronomy Education Research.] In this paper we discuss the design and development of a learning progression (LP to describe and interpret students’ understanding about stellar structure and evolution (SSE. The LP is built upon three content dimensions: hydrostatic equilibrium; composition and aggregation state; functioning and evolution. The data to build up the levels of the hypothetical LP (LP1 came from a 45-minute, seven-question interview, with 33 high school students previously taught about the topic. The questions were adapted from an existing multiple-choice instrument. Data were analyzed using Minstrell’s “facets” approach. To assess the validity of LP1, we designed a twelve-hour teaching module featuring paper-and-pencil tasks and practical activities to estimate the stellar structure and evolution parameters. Twenty high school students were interviewed before and after the activities using the same interview protocol. Results informed a revision of LP1 (LP2 and, in parallel, of the module. The revised module included supplementary activities corresponding to changes made to LP1. We then assessed LP2 with 30 high school students through the same interview, submitted before and after the teaching intervention. A final version of the LP (LP3 was then developed drawing on students’ emerging reasoning strategies. This paper contributes to research in science education by providing an example of the iterative development of the instruction required to support the student thinking that LPs’ levels describe. Concerning astronomy education research, our findings can inform suitable instructional activities more responsive to students’ reasoning strategies about stellar structure and evolution.

  8. Recent Developments in the Construction of Floating Structures ...

    This paper presents the applications of floating structures in (a) creating land from the ocean for airports, container ports, cruise terminals, oil storage, power plants, fish farms, recreation facilities, aquatic observatories, residential facilities, marinas and even relay bases for receiving micro waves from outer space, etc, ...

  9. Postnatal development of collagen structure in ovine articular cartilage

    Turnhout, van M.C.; Schipper, H.; Engel, B.; Buist, W.; Kranenbarg, S.; Leeuwen, van J.L.

    2010-01-01

    Background Articular cartilage (AC) is the layer of tissue that covers the articulating ends of the bones in diarthrodial joints. Across species, adult AC shows an arcade-like structure with collagen predominantly perpendicular to the subchondral bone near the bone, and collagen predominantly

  10. Postnatal development of collagen structure in ovine articular cartilage

    Turnhout, van M.C.; Schipper, H.; Engel, B.; Buist, W.; Kranenbarg, S.; Leeuwen, van J.L.

    2010-01-01

    BACKGROUND:Articular cartilage (AC) is the layer of tissue that covers the articulating ends of the bones in diarthrodial joints. Across species, adult AC shows an arcade-like structure with collagen predominantly perpendicular to the subchondral bone near the bone, and collagen predominantly

  11. Structural damage in masonry : Developing diagnostic decision support

    De Vent, I.A.E.

    2011-01-01

    This thesis deals with the diagnosis of structural damage in traditional masonry: cracks, deformations and tilts. Establishing the cause of this type of damage can be difficult. This research project has aimed to improve and facilitate the diagnostic process by offering support in the initial phase

  12. Development, structure and strength properties of PP/PMMA/FA ...

    Unknown

    polymeric materials, are matrix structure, processing and use of fillers or reinforcements. The filler contents, sur- face treatment and adhesion between filler and polymer matrix affect the macroscopic and mechanical characte- ristics of composite materials (Mituishi et al 1988). Lipatov et al (1976) observed broadening of ...

  13. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

  14. Design and Development of RF Structures for Linac4

    Vretenar, M; Gerigk, F; Pasini, M; Wegner, R

    2006-01-01

    Linac4 is a new 160 MeV H− linac proposed at CERN to replace the 50 MeV Linac2 as injector to the PS Booster, with the goal of doubling its brightness and intensity. The present design foresees after RFQ and chopping line a sequence of three accelerating structures: a Drift Tube Linac (DTL) from 3 to 40 MeV, a Cell-Coupled DTL (CCDTL) to 90 MeV and a Side Coupled Linac (SCL) up to the final energy. The DTL and CCDTL operate at 352 MHz, while in the SCL the frequency is doubled to 704 MHz. Although the injection in the PS Booster requires only a low duty cycle, the accelerating structures are designed to operate at the high duty cycle required by a possible future extension to a high-power linac driver for a neutrino facility. This paper presents the different accelerating structures, underlining the progress in the design of critical resonator elements, like post-couplers in the DTL, coupling slots in the CCDTL and bridge couplers for the SCL. Prototyping progress for the different structures is reported...

  15. The development of high-resolution spectroscopic methods and their use in atomic structure studies

    Poulsen, O.

    1984-01-01

    This thesis discusses work performed during the last nine years in the field of atomic spectroscopy. Several high-resolution techniques, ranging from quantum beats, level crossings, rf-laser double resonances to nonlinear field atom interactions, have been employed. In particular, these methods have been adopted and developed to deal with fast accelerated atomic or ionic beams, allowing studies of problems in atomic-structure theory. Fine- and hyperfine-structure determinations in the He I and Li I isoelectronic sequences, in 51 V I, and in 235 U I, II have permitted a detailed comparison with ab initio calculations, demonstrating the change in problems when going towards heavier elements or higher ionization stage. The last part of the thesis is concerned with the fundamental question of obtaining very high optical resolution in the interaction between a fast accelerated atom or ion beam and a laser field, this problem being the core in the continuing development of atomic spectroscopy necessary to challenge the more precise and sophisticated theories advanced. (Auth.)

  16. Recent developments of nano-structured materials as the catalysts for oxygen reduction reaction

    Kang, SungYeon; Kim, HuiJung; Chung, Yong-Ho

    2018-04-01

    Developments of high efficient materials for electrocatalyst are significant topics of numerous researches since a few decades. Recent global interests related with energy conversion and storage lead to the expansion of efforts to find cost-effective catalysts that can substitute conventional catalytic materials. Especially, in the field of fuel cell, novel materials for oxygen reduction reaction (ORR) have been noticed to overcome disadvantages of conventional platinum-based catalysts. Various approaching methods have been attempted to achieve low cost and high electrochemical activity comparable with Pt-based catalysts, including reducing Pt consumption by the formation of hybrid materials, Pt-based alloys, and not-Pt metal or carbon based materials. To enhance catalytic performance and stability, numerous methods such as structural modifications and complex formations with other functional materials are proposed, and they are basically based on well-defined and well-ordered catalytic active sites by exquisite control at nanoscale. In this review, we highlight the development of nano-structured catalytic materials for ORR based on recent findings, and discuss about an outlook for the direction of future researches.

  17. Development and Feasibility of a Structured Goals of Care Communication Guide.

    Bekelman, David B; Johnson-Koenke, Rachel; Ahluwalia, Sangeeta C; Walling, Anne M; Peterson, Jamie; Sudore, Rebecca L

    2017-09-01

    Discussing goals of care and advance care planning is beneficial, yet how to best integrate goals of care communication into clinical care remains unclear. To develop and determine the feasibility of a structured goals of care communication guide for nurses and social workers. Developmental study with providers in an academic and Veterans Affairs (VA) health system (n = 42) and subsequent pilot testing with patients with chronic obstructive pulmonary disease or heart failure (n = 15) and informal caregivers (n = 4) in a VA health system. During pilot testing, the communication guide was administered, followed by semistructured, open-ended questions about the content and process of communication. Changes to the guide were made iteratively, and subsequent piloting occurred until no additional changes emerged. Provider and patient feedback to the communication guide. Iterative input resulted in the goals of care communication guide. The guide included questions to elicit patient understanding of and attitudes toward the future of illness, clarify values and goals, identify end-of-life preferences, and agree on a follow-up plan. Revisions to guide content and phrasing continued during development and pilot testing. In pilot testing, patients validated the importance of the topic; none said the goals of care discussion should not be conducted. Patients and informal caregivers liked the final guide length (∼30 minutes), felt it flowed well, and was clear. In this developmental and pilot study, a structured goals of care communication guide was iteratively designed, implemented by nurses and social workers, and was feasible based on administration time and acceptability by patients and providers.

  18. The development of structures in analogue and natural debris avalanches

    Paguican, Engielle Mae; van Wyk de Vries, Benjamin; Mahar Francisco Lagmay, Alfredo; Grosse, Pablo

    2010-05-01

    All types of rockslide-debris avalanches present a plethora of internal structures that are also well observed on the surface. Many of these are seen as faults and folds that can be used to determine deformation history and kinematics. We present two sets of simple and well-constrained experiments of reduced basal friction laboratory rockslides, equivalent to a highly deformed simple shear layer, with plug-flow. These follow the original ramp-slide work of Shea and van Wyk de Vries (Geosphere, 2008). The experiments used a curved ramp where materials accelerate until reaching a gently-sloped depositional surface and a constantly inclined ramp with a more regular slope and longer slides. A detailed description of deposit structures, their sequential formation and morphology is then used to investigate the transport type and deformation chronology from slide initiation to runout stopping of avalanches. Results using a curved ramp show accumulation and thickening at where the slope decreases. The thickened mass then further remobilises and advances by secondary collapse of the mass. Such a stop-start process may be important in many mountainous avalanches where there are rapid changes in slope. The constantly inclined ramp shows shearing and extensional structures at the levees and a set of compression and extension structures in the middle. We noted that frontal accumulation during flow occurs as materials at the front move slower relative to those in the medial and proximal zones. This also leads to secondary frontal collapse, and helps to maintain a thicker mass that can flow further. Descriptions and analyses of these structures are then applied to the kinematics and dynamics of natural examples. We study the 2006 Guinsaugon Rockslide event in the Philippines and find that frontal accumulation and secondary avalanching had also occurred and were important in determining the distribution and runout of the mass. Frontal bulking and collapse may also have occurred at

  19. Animating Geometry Discussions with Flexigons.

    McClintock, Ruth

    1994-01-01

    Presents activities with 10- and 4-straw flexigons, an object created by stringing together lengths of plastic drinking straws with nylon fishing line. Discusses several geometric theorems that can be demonstrated with flexigons. (MKR)

  20. Lunch to discuss IDRC's programming

    chantal Taylor

    Page 1. Description: Lunch to discuss IDRC's programming. Date: 2017-02-10. Attendees: 2 (IDRC 1). Location: Ottawa. Total: $79.92. Comments: 2016-2017 Hospitality Expense. Reports for Jean Lebel, President.

  1. LGBT Roundtable Discussion: Meet-up and Mentoring Discussion

    2014-03-01

    The LGBT+ Physicists group welcomes those who identify as gender sexual minorities, as LGBTQQIAAP+, or as allies to participate in a round-table discussion on mentoring physicists. The session will provide an opportunity to learn and discuss successful mentoring strategies at different career stages for physicists in all environments, including academia, industry, etc. Attendees are encouraged to attend a social event to follow the panel to continue to network. Allies are especially welcome at this event to learn how to support and mentor LGBT+ physicists.

  2. Discussion on Papers 5 - 7

    Strongman, C.P.; Jones, R.; Moorhead, H.

    1992-01-01

    The topics raised in discussion included: the performance of the generator sets; the movement of sediments and the effect on beach levels; monitoring near-bed sediments; the erosion of barrage materials by suspended solids; sediment transport models; the accuracy of hydrographic and other surveys; the relative ornithological importance of the estuary with respect to others in the United Kingdom. Separate abstracts were prepared for each of the three papers under discussion. (UK)

  3. Open Education Week Panel Discussion

    Doolittle, Peter; Hart, Heath; Hartman, Greg; Seyam, Mohammed; Walz, Anita R.

    2015-01-01

    Introduction by Julie Speer, Associate Dean for Research & Informatics. Open remarks by Anita Walz, Assessment, Open Education & Online Learning Environments Librarian. Mohammed Seyam discusses the value of openly licensed material as a student, research, and graduate assistant. Heath Hart reflects on his adoption of an open educational resource and a (subscribed) online textbook in, “A Rousing Success and an Unmitigated Disaster.” Greg Hartman discusses his experiences authoring open-source ...

  4. The Conditions of Structural and Innovation Policy of Development of Economy of Russia

    N. I. Komkov

    2017-01-01

    Full Text Available Purpose: in the article the problems of formation of conditions for Russia’s social and economic development with a consideration of the present and recreated scientific and technological potential are considered. The purpose of the article consists in researching the sources of social and economic development of Russian economy in the medium- and long-term perspective, and also in rationalization of possibilities of their long term usage. Methods: the in the article methods of the comparative economic analysis, system approach to the economy development management as a complex self-recovering system with a potential, which has certain properties and regularities such as: complete social and economic system lifecycle, complete production cycle, technological structure, basic technologies, etc., are used. Results: during the research process if has been concluded that economic downturn in Russia was caused by economy export orientation of the initial repartitions and low added value resource products. Supporting such strategy were the economic instruments: taxes, ruble exchange rate, bank rate etc. Conclusions and Relevance: it has been shown that long-term development can be based mainly on usage of intensive factors. Even the involvement of Russian huge natural resources into the economic activity will not be able to completely solve a problem of prevention of degradation of the processing industrial economic sectors. Two key development terms are noted: investments and structural reform. It is noted that the main sources of investments are the internal and external ones. Increase of their potential is connected with adoption of tough strategic and political decisions. In its turn, effective usage of the expected increase in investments requires an urgent solution of competitive domestic technologies development problems, as well as problem of effective management of economy and its development on an innovative basis. Possibilities of

  5. Development of the simulation package 'ELSES' for extra-large-scale electronic structure calculation

    Hoshi, T [Department of Applied Mathematics and Physics, Tottori University, Tottori 680-8550 (Japan); Fujiwara, T [Core Research for Evolutional Science and Technology, Japan Science and Technology Agency (CREST-JST) (Japan)

    2009-02-11

    An early-stage version of the simulation package 'ELSES' (extra-large-scale electronic structure calculation) is developed for simulating the electronic structure and dynamics of large systems, particularly nanometer-scale and ten-nanometer-scale systems (see www.elses.jp). Input and output files are written in the extensible markup language (XML) style for general users. Related pre-/post-simulation tools are also available. A practical workflow and an example are described. A test calculation for the GaAs bulk system is shown, to demonstrate that the present code can handle systems with more than one atom species. Several future aspects are also discussed.

  6. Children, structure and agency: realities across the developing world

    Lieten, G.K.

    2008-01-01

    The child labour debate, the Child Rights Convention and the target of universal primary education in the Millennium Development Goals have drawn increasing attention to children in developing countries. Alongside, a debate has waged on the need for child participation and the appropriateness of

  7. Market Structure in the Context of Developing Competitive Strategy

    Algirdas Krivka

    2011-04-01

    Full Text Available The abstract deals with the application of positioning strategies under the conditions of classical market structures. It is discovered that the assumptions of pure competition leave no space for M. Porter’s generic cost leadership and differentiation strategies to be applied. The enterprise’s actions, influencing five competitive forces and implementing generic strategies, are reasonable under the conditions of imperfect competition market structures. The game theory models, applied to oligopoly, indicate the close interaction of enterprises and interdependence of their strategic decisions: cost reduction and differentiation strategies not only increase the profit of the enterprise, implementing the strategy, but by affecting market price and residual demand decrease the competitor’s profit.Article in Lithuanian

  8. Plant membranes a biophysical approach to structure, development and senescence

    Leshem, Ya’Acov Y

    1992-01-01

    The plasma membrane is at once the window through which the cell senses the environment and the portal through which the environment influences the structure and activities of the cell. Its importance in cellular physiology can thus hardly be overestimated, since constant flow of materials between cell and environment is essential to the well-being of any biological system. The nature of the materials mov­ ing into the cell is also critical, since some substances are required for maintenance and growth, while others, because of their toxicity, must either be rigorously excluded or permitted to enter only after chemical alteration. Such alteration frequently permits the compounds to be sequestered in special cellular compartments having different types of membranes. This type of homogeneity, plus the fact that the wear and tear of transmembrane molecular traffic compels the system to be constantly monitored and repaired, means that the membrane system of any organism must be both structurally complex and dy­...

  9. Bureaucratic Structure and Bureaucratic Performance in Less Developed Countries

    Rauch, James E; Evans, Peter B.

    1999-01-01

    Recent cross-country empirical analysis has found that privately produced ratings of the performance of the central government bureaucracy in areas such as corruption and red tape are significant predictors of economic performance. We argue that several relatively simple, easily identifiable structural features constitute the key ingredients of effective state bureaucracies and should help to predict these ratings: competitive salaries, internal promotion and career stability, and meritocrati...

  10. Code Development for Control Design Applications: Phase I: Structural Modeling

    Bir, G. S.; Robinson, M.

    1998-01-01

    The design of integrated controls for a complex system like a wind turbine relies on a system model in an explicit format, e.g., state-space format. Current wind turbine codes focus on turbine simulation and not on system characterization, which is desired for controls design as well as applications like operating turbine model analysis, optimal design, and aeroelastic stability analysis. This paper reviews structural modeling that comprises three major steps: formation of component equations, assembly into system equations, and linearization

  11. Innovative Strategies to Develop Chemical Categories Using a Combination of Structural and Toxicological Properties

    Monika Batke

    2016-09-01

    Full Text Available 1.AbstractInterest is increasing in the development of non-animal methods for toxicological evaluations. These methods are however, particularly challenging for complex toxicological endpoints such as repeated dose toxicity. European Legislation, e.g. the European Union´s Cosmetic Directive and REACH, demands the use of alternative methods. Frameworks, such as the Read-across Assessment Framework or the Adverse Outcome Pathway Knowledge Base, support the development of these methods. The aim of the project presented in this publication was to develop substance categories for a read-across with complex endpoints of toxicity based on existing databases. The basic conceptual approach was to combine structural similarity with shared mechanisms of action. Substances with similar chemical structure and toxicological profile form candidate categories suitable for read-across. We combined two databases on repeated dose toxicity, RepDose database and ELINCS database to form a common database for the identification of categories. The resulting database contained physicochemical, structural and toxicological data, which were refined and curated for cluster analyses. We applied the Predictive Clustering Tree (PCT approach for clustering chemicals based on structural and on toxicological information to detect groups of chemicals with similar toxic profiles and pathways/mechanisms of toxicity. As many of the experimental toxicity values were not available, this data was imputed by predicting them with a multi-label classification method, prior to clustering. The clustering results were evaluated by assessing chemical and toxicological similarities with the aim of identifying clusters with a concordance between structural information and toxicity profiles/mechanisms. From these chosen clusters, seven were selected for a quantitative read-across, based on a small ratio of NOAEL of the members with the highest and the lowest NOAEL in the cluster (<5. We discuss

  12. Upper Stage Flight Experiment (USFE) Integral Structure Development Effort

    Guerrero, Jim; Hamilton, Brent; Burton, Randy; Crockett, Dave; Taylor, Zach

    2004-01-01

    .... AFRL/VS is developing a wide range of tank concepts that include linerless cryogenic tankage, self-healing cryogenic tankage, hydrogen peroxide compatible tankage, volumetrically efficient toroidal (donut shaped...

  13. Development of nondestructive evaluation methods for structural ceramics

    Ellingson, W.A.; Roberts, R.A.; Vannier, M.W.; Ackerman, J.L.; Sawicka, B.D.; Gronemeyer, S.; Kriz, R.J.

    1987-01-01

    Advanced nondestructive evaluation methods are being developed to characterize ceramic materials and allow improvement of process technology. If one can spatially determine porosity, map organic binder/plasticizer distributions, measure average through-volume and in-plane density, as well as detect inclusions, process and machining operations may be modified to enhance the reliability of ceramics. Two modes of X-ray tomographic imaging -- advanced film (analog) tomography and computed tomography -- are being developed to provide flaw detection and density profile mapping capability. Nuclear magnetic resonance imaging is being developed to determine porosity and map the distribution of organic binder/plasticizer. Ultrasonic backscatter and through-transmission are being developed to measure average through-thickness densities and detect surface inclusions

  14. Development of a Thermal Isolation Structure for Aerospace Cryogenic Instruments

    Nash, A.; Robeck, L.

    1999-01-01

    A proof of concept prototype cryostat has been developed to demonstrate the ability to accommodate low temperature science investigations within the constraints of the Hitchhiker siderail carrier on the space shuttle.

  15. Protein structure similarity clustering (PSSC) and natural product structure as inspiration sources for drug development and chemical genomics

    Dekker, Frank J; Koch, Marcus A; Waldmann, Herbert; Dekker, Frans

    Finding small molecules that modulate protein function is of primary importance in drug development and in the emerging field of chemical genomics. To facilitate the identification of such molecules, we developed a novel strategy making use of structural conservatism found in protein domain

  16. Automation of program model developing for complex structure control objects

    Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

    1991-01-01

    A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

  17. Development, simulation and testing of structural materials for DEMO

    Laesser, R.; Baluc, N.; Boutard, J.-L.; Diegele, E.; Gasparotto, M.; Riccardi, B.; Dudarev, S.; Moeslang, A.; Pippan, R.; Schaaf, B. van der

    2006-01-01

    In DEMO the structural and functional materials of the in-vessel components will be exposed to a very intense flux of fusion neutrons with energies up to 14 MeV creating displacement cascades and gaseous transmutation products. Point defects and transmutations will induce new microstructures leading to changes in mechanical and physical properties such as hardening, swelling, loss of fracture toughness and creep strength. The kinetics of microstructural evolution depends on time, temperature and defect production rates. The structural materials to be used in DEMO should have very special properties: high radiation resistance up to the dose of 100 dpa, low residual activation, high creep strength and good compatibility with the cooling media in as wide a temperature operational window as possible for the achievement of high thermal efficiency. The most promising materials are: Reduced Activation Ferritic Martensitic (RAFM) steels (Eurofer and F82H), Oxide Dispersion Strengthened (ODS) RAFM and RAF steels, SiC fibres reinforced SiC matrix composites (SiCf/SiC), tungsten (W) and W-alloys. Each of these materials has its advantages and drawbacks and will be best used under certain conditions. Presently the best studied group of materials are the RAFM steels. They require the smallest extrapolation for use in DEMO but also offer the lowest upper temperature limit of operation (550 o C) and thus the lowest thermal efficiency. The other materials foreseen for more advanced breeder blanket and divertor concepts require intense fundamental R(and)D and testing before their acceptance, whereas the so-called Test Blanket Modules (TBMs) will be constructed using RAFM steel and tested in ITER. Validation of the DEMO structural materials will be done in IFMIF, the International Fusion Materials Irradiation Facility, which will produce neutron damage and transmutation products very similar to those characterising a fusion device and will allow accelerated testing with damage rates

  18. Development of measures to assess the safety of existing NPPs and the effectiveness of regulations and regulatory actions (including 'prescriptive' and 'performance based' approaches). Peer discussions on regulatory practices

    1996-09-01

    This report arises from the fourth series of peer discussions on regulatory practices entitled D evelopment of measures to assess the safety of existing nuclear power plants and the effectiveness of regulations and regulatory actions (including 'prescriptive' and 'performance based' approaches) . Senior regulators from 23 Member States participated in four peer group discussions during 1995-1996. This report presents the outcome of these meetings and recommendations of good practices identified by these senior regulators. The purpose of this report is to disseminate the views which the senior regulators presented at the meetings relating to measures used for assessing the safety of existing nuclear power plants and evaluating the effectiveness of regulators and regulatory actions. The intention in doing this is to assist Member States in the enhancement of their regulatory practices by identifying commonly accepted good practices. This report is structured so that it covers the subject matter under the following main headings: 'Prescriptive and Performance Based' Approaches to Regulation; Common Features of Regulatory Approaches; Effectiveness of the Regulator and Regulatory Actions; Recommendations of Good Practice. It is important to note that recommendations of good practice are included if they have been identified by at least one of the groups. It does not follow that all of the groups or individual Member States would necessarily endorse all of the recommendations. However, it is considered that if a single group of senior regulators judge that a particular practice is worthy of recommendation then it should be included for serious consideration. In some cases the same recommendations arise from all of the Groups

  19. Integrating centralized and decentralized organization structures: an education and development model.

    Sheriff, R; Banks, A

    2001-01-01

    Organization change efforts have led to critically examining the structure of education and development departments within hospitals. This qualitative study evaluated an education and development model in an academic health sciences center. The model combines centralization and decentralization. The study results can be used by staff development educators and administrators when organization structure is questioned. This particular model maximizes the benefits and minimizes the limitations of centralized and decentralized structures.

  20. Structural integrity and its role in nuclear safety recent UK developments in the development of high temperature design procedures

    Townley, C.H.A.

    1991-01-01

    The structural design rules for the reactors which operate at high temperature are not yet well developed. There is not difficulty in producing the plants which meet the high standards required by nuclear industry. However, there are the issues to be resolved which are associated with the deterioration of components in service, in order to achieve the optimum use of materials and the reduction of capital costs. The safety of plants is not at risk since any deterioration is detected by in-service monitoring, nevertheless, there would be severe economic penalty, if a plant must be retired prematurely because the continuing safety could not be demonstrated. In this paper, a liquid metal fast breeder reactor is taken up as an example, and the topics in which research plays a role for providing improved design rules are identified. Shakedown interaction diagrams, the methods of analysis based on shakedown, inelastic analysis and constitutive equations, creep fatigue damage and thermal shock, thermal striping, welds, defect assessment and so on are discussed. (K.I.)

  1. General discussion of feasibility study

    Calori, F.

    1976-01-01

    Fundamentals, objectives and parameters of feasibility studies in the field of nuclear power project planning are discussed in a general way. Technical and economic problems to be considered are pointed out. In special cases, IAEA offers its aid and support. (UA) [de

  2. Helping Students Discuss Race Openly

    Landsman, Julie

    2016-01-01

    One way teachers can disrupt inequities is by doing the work to foster discussions in which students talk about race--and racism--honestly together. Teachers also need to be ready to talk with students sensitively when the subject of race comes up spontaneously--in a student's work, connected to events outside school, or in response to a…

  3. Another Discussion about Academic Corruption

    Changgeng, Li

    2007-01-01

    Academic corruption is a commonplace matter about which all people are clearly aware. However, people often overlook many hidden or latent manifestations of academic corruption. This article discusses eight of these manifestations: indiscriminate use of the academic team spirit, the proliferation of "word games," deliberate attacks on…

  4. Learning through synchronous electronic discussion

    Kanselaar, G.; Veerman, A.L.; Andriessen, J.E.B.

    2000-01-01

    This article reports a study examining university student pairs carrying out an electronic discussion task in a synchronous computer mediated communication (CMC) system (NetMeeting). The purpose of the assignment was to raise students' awareness concerning conceptions that characterise effective

  5. Choice Orientations, Discussions, and Prospects.

    Raywid, Mary Anne

    1992-01-01

    Examining the contemporary school choice debate yields arguments that are education, economics, governance, and policy driven. To "break the exclusive franchise," school districts are increasingly sponsoring school operation and education services supplied by multiple sources, and states are discussing sponsorship of schools by entities…

  6. Facilitating wind development: the importance of electric industry structure

    Kirby, Brendan; Milligan, Michael

    2008-04-15

    ISOs and RTOs, with their day-ahead and real-time markets, large geographies to aggregate diverse wind resources, large loads to aggregate with wind, large generation pools that tap conventional-generator flexibility, and regional transmission planning efforts, offer the best environments for wind generation to develop. (author)

  7. A subsoil compaction database: its development, structure and content

    Trautner, A.; Akker, van den J.J.H.; Fleige, H.; Arvidsson, J.; Horn, R.

    2003-01-01

    A database which holds results of field and laboratory experiments on the impact of subsoil compaction on physical and mechanical soil parameters and on crop yields and environmental impact is being developed within the EU-sponsored concerted action (CA) project "Experiences with the impact of

  8. Structural development of livestock farms in a global perspective

    Hansen, Henning Otte

    2015-01-01

    as a whole and in agriculture is seen. The vertical integration in the form of contract production and cooperative ownership is increasing in several places in the world. Labor emigration from agriculture is also a general feature during economic development, and this will intensify labor productivity...

  9. Exploring Coordination Structures in Open Source Software Development

    van Hillegersberg, Jos; Harmsen, Frank; Hegeman, J.H.; Amrit, Chintan Amrit; Geisberger, Eva; Keil, Patrick; Kuhrmann, Marco

    2007-01-01

    Coordination is difficult to achieve in a large globally distributed project setting. The problem is multiplied in open source software development projects, where most of the traditional means of coordination such as plans, system-level designs, schedules and defined process are not used. In order

  10. Financial Structure and Economic Welfare: Applied General Equilibrium Development Economics.

    Townsend, Robert

    2010-09-01

    This review provides a common framework for researchers thinking about the next generation of micro-founded macro models of growth, inequality, and financial deepening, as well as direction for policy makers targeting microfinance programs to alleviate poverty. Topics include treatment of financial structure general equilibrium models: testing for as-if-complete markets or other financial underpinnings; examining dual-sector models with both a perfectly intermediated sector and a sector in financial autarky, as well as a second generation of these models that embeds information problems and other obstacles to trade; designing surveys to capture measures of income, investment/savings, and flow of funds; and aggregating individuals and households to the level of network, village, or national economy. The review concludes with new directions that overcome conceptual and computational limitations.

  11. Structure, agency, and the development of students' identities as learners

    Olitsky, Stacy

    2006-12-01

    This paper focuses on the role of dominant school discourses in structuring how students position themselves and others relative to a community centered on science. The study was conducted in a diverse, eighth grade classroom in an urban magnet school. I argue that dominant discourses portray a limited view of available subject positions, in that the purpose of learning science is associated with a dichotomous view of people as being either college-bound or not. I explore how these limited subject positions can pose contradictions with some students' interests, constrain students' visions of possibilities, exacerbate disadvantages based on race and class, and interfere with students acquiring identities as science learners. However, there are also possibilities for resistance, agency and self-definition through students' talk.

  12. Financial Structure and Economic Welfare: Applied General Equilibrium Development Economics

    Townsend, Robert

    2010-01-01

    This review provides a common framework for researchers thinking about the next generation of micro-founded macro models of growth, inequality, and financial deepening, as well as direction for policy makers targeting microfinance programs to alleviate poverty. Topics include treatment of financial structure general equilibrium models: testing for as-if-complete markets or other financial underpinnings; examining dual-sector models with both a perfectly intermediated sector and a sector in financial autarky, as well as a second generation of these models that embeds information problems and other obstacles to trade; designing surveys to capture measures of income, investment/savings, and flow of funds; and aggregating individuals and households to the level of network, village, or national economy. The review concludes with new directions that overcome conceptual and computational limitations. PMID:21037939

  13. Development of microwave amplifier based on gallium nitride semiconductor structures

    Pavlov, D.Yi.; Prokopenko, O.V.; Tsvyirko, Yu.A.; Pavlov, Yi.L.

    2014-01-01

    Microwave properties of microwave amplifier based on gallium nitride (GN) semiconductor structures has been calculated numerically. We proposed the method of numerical calculation of device. This method is accurately sets the value of its characteristics depending on the elements that are used in design of amplifier. It is shown that the device based on GN HEMT-transistors could have amplification factor about 50 dB, while its sizes are 27x18x5.5 mm 3 . Also was provided the absolute stability an amplifier in the whole operating frequency range. It is quite important when using this type of amplifiers in different conditions of exploitation and various fields of use the radioelectronic equipment

  14. The temporal structure of pollution levels in developed cities.

    Barrigón Morillas, Juan Miguel; Ortiz-Caraballo, Carmen; Prieto Gajardo, Carlos

    2015-06-01

    Currently, the need for mobility can cause significant pollution levels in cities, with important effects on health and quality of life. Any approach to the study of urban pollution and its effects requires an analysis of spatial distribution and temporal variability. It is a crucial dilemma to obtain proven methodologies that allow an increase in the quality of the prediction and the saving of resources in the spatial and temporal sampling. This work proposes a new analytical methodology in the study of temporal structure. As a result, a model for estimating annual levels of urban traffic noise was proposed. The average errors are less than one decibel in all acoustics indicators. A new working methodology of urban noise has begun. Additionally, a general application can be found for the study of the impacts of pollution associated with traffic, with implications for urban design and possibly in economic and sociological aspects. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Quantum Monte Carlo for electronic structure: Recent developments and applications

    Rodriguez, M.M.S.; Lawrence Berkeley Lab., CA

    1995-04-01

    Quantum Monte Carlo (QMC) methods have been found to give excellent results when applied to chemical systems. The main goal of the present work is to use QMC to perform electronic structure calculations. In QMC, a Monte Carlo simulation is used to solve the Schroedinger equation, taking advantage of its analogy to a classical diffusion process with branching. In the present work the author focuses on how to extend the usefulness of QMC to more meaningful molecular systems. This study is aimed at questions concerning polyatomic and large atomic number systems. The accuracy of the solution obtained is determined by the accuracy of the trial wave function's nodal structure. Efforts in the group have given great emphasis to finding optimized wave functions for the QMC calculations. Little work had been done by systematically looking at a family of systems to see how the best wave functions evolve with system size. In this work the author presents a study of trial wave functions for C, CH, C 2 H and C 2 H 2 . The goal is to study how to build wave functions for larger systems by accumulating knowledge from the wave functions of its fragments as well as gaining some knowledge on the usefulness of multi-reference wave functions. In a MC calculation of a heavy atom, for reasonable time steps most moves for core electrons are rejected. For this reason true equilibration is rarely achieved. A method proposed by Batrouni and Reynolds modifies the way the simulation is performed without altering the final steady-state solution. It introduces an acceleration matrix chosen so that all coordinates (i.e., of core and valence electrons) propagate at comparable speeds. A study of the results obtained using their proposed matrix suggests that it may not be the optimum choice. In this work the author has found that the desired mixing of coordinates between core and valence electrons is not achieved when using this matrix. A bibliography of 175 references is included

  16. Serotonin neuron development: shaping molecular and structural identities.

    Deneris, Evan; Gaspar, Patricia

    2018-01-01

    The continuing fascination with serotonin (5-hydroxytryptamine, 5-HT) as a nervous system chemical messenger began with its discovery in the brains of mammals in 1953. Among the many reasons for this decades-long interest is that the small numbers of neurons that make 5-HT influence the excitability of neural circuits in nearly every region of the brain and spinal cord. A further reason is that 5-HT dysfunction has been linked to a range of psychiatric and neurological disorders many of which have a neurodevelopmental component. This has led to intense interest in understanding 5-HT neuron development with the aim of determining whether early alterations in their generation lead to brain disease susceptibility. Here, we present an overview of the neuroanatomical organization of vertebrate 5-HT neurons, their neurogenesis, and prodigious axonal architectures, which enables the expansive reach of 5-HT neuromodulation in the central nervous system. We review recent findings that have revealed the molecular basis for the tremendous diversity of 5-HT neuron subtypes, the impact of environmental factors on 5-HT neuron development, and how 5-HT axons are topographically organized through disparate signaling pathways. We summarize studies of the gene regulatory networks that control the differentiation, maturation, and maintenance of 5-HT neurons. These studies show that the regulatory factors controlling acquisition of 5-HT-type transmitter identity continue to play critical roles in the functional maturation and the maintenance of 5-HT neurons. New insights are presented into how continuously expressed 5-HT regulatory factors control 5-HT neurons at different stages of life and how the regulatory networks themselves are maintained. WIREs Dev Biol 2018, 7:e301. doi: 10.1002/wdev.301 This article is categorized under: Nervous System Development > Vertebrates: General Principles Gene Expression and Transcriptional Hierarchies > Gene Networks and Genomics Gene Expression and

  17. Development of residual stress analysis procedure for fitness-for-service assessment of welded structure

    Kim, Jong Sung; Jin, Tae Eun; Dong, P.; Prager, M.

    2003-01-01

    In this study, a state of art review of existing residual stress analysis techniques and representative solutions is presented in order to develop the residual stress analysis procedure for Fitness-For-Service(FFS) assessment of welded structure. Critical issues associated with existing residual stress solutions and their treatments in performing FFS are discussed. It should be recognized that detailed residual stress evolution is an extremely complicated phenomenon that typically involves material-specific thermomechanical/metallurgical response, welding process physics, and structural interactions within a component being welded. As a result, computational procedures can vary significantly from highly complicated numerical techniques intended only to elucidate a small part of the process physics to cost-effective procedures that are deemed adequate for capturing some of the important features in a final residual stress distribution. Residual stress analysis procedure for FFS purposes belongs to the latter category. With this in mind, both residual stress analysis techniques and their adequacy for FFS are assessed based on both literature data and analyses performed in this investigation

  18. The Topology of a Discussion: The #Occupy Case.

    Floriana Gargiulo

    Full Text Available We analyse a large sample of the Twitter activity that developed around the social movement 'Occupy Wall Street', to study the complex interactions between the human communication activity and the semantic content of a debate.We use a network approach based on the analysis of the bipartite graph @Users-#Hashtags and of its projections: the 'semantic network', whose nodes are hashtags, and the 'users interest network', whose nodes are users. In the first instance, we find out that discussion topics (#hashtags present a high structural heterogeneity, with a relevant role played by the semantic hubs that are responsible to guarantee the continuity of the debate. In the users' case, the self-organisation process of users' activity, leads to the emergence of two classes of communicators: the 'professionals' and the 'amateurs'.Both the networks present a strong community structure, based on the differentiation of the semantic topics, and a high level of structural robustness when certain sets of topics are censored and/or accounts are removed.By analysing the characteristics of the dynamical networks we can distinguish three phases of the discussion about the movement. Each phase corresponds to a specific moment of the movement: from declaration of intent, organisation and development and the final phase of political reactions. Each phase is characterised by the presence of prototypical #hashtags in the discussion.

  19. Quantum Monte Carlo for electronic structure: Recent developments and applications

    Rodriquez, Maria Milagos Soto [Lawrence Berkeley Lab. and Univ. of California, Berkeley, CA (United States). Dept. of Chemistry

    1995-04-01

    Quantum Monte Carlo (QMC) methods have been found to give excellent results when applied to chemical systems. The main goal of the present work is to use QMC to perform electronic structure calculations. In QMC, a Monte Carlo simulation is used to solve the Schroedinger equation, taking advantage of its analogy to a classical diffusion process with branching. In the present work the author focuses on how to extend the usefulness of QMC to more meaningful molecular systems. This study is aimed at questions concerning polyatomic and large atomic number systems. The accuracy of the solution obtained is determined by the accuracy of the trial wave function`s nodal structure. Efforts in the group have given great emphasis to finding optimized wave functions for the QMC calculations. Little work had been done by systematically looking at a family of systems to see how the best wave functions evolve with system size. In this work the author presents a study of trial wave functions for C, CH, C2H and C2H2. The goal is to study how to build wave functions for larger systems by accumulating knowledge from the wave functions of its fragments as well as gaining some knowledge on the usefulness of multi-reference wave functions. In a MC calculation of a heavy atom, for reasonable time steps most moves for core electrons are rejected. For this reason true equilibration is rarely achieved. A method proposed by Batrouni and Reynolds modifies the way the simulation is performed without altering the final steady-state solution. It introduces an acceleration matrix chosen so that all coordinates (i.e., of core and valence electrons) propagate at comparable speeds. A study of the results obtained using their proposed matrix suggests that it may not be the optimum choice. In this work the author has found that the desired mixing of coordinates between core and valence electrons is not achieved when using this matrix. A bibliography of 175 references is

  20. Developing a robust wireless sensor network structure for environmental sensing

    Zhang, Z.; Oroza, C.; Glaser, S. D.; Bales, R. C.; Conklin, M. H.

    2013-12-01

    The American River Hydrologic Observatory is being strategically deployed as a real-time ground-based measurement network that delivers accurate and timely information on snow conditions and other hydrologic attributes with a previously unheard of granularity of time and space. The basin-scale network involves 18 sub-networks set out at physiographically representative locations spanning the seasonally snow-covered half of the 5000 km2 American river basin. Each sub-network, covering about a 1-km2 area, consists of 10 wirelessly networked sensing nodes that continuously measure and telemeter temperature, and snow depth; plus selected locations are equipped with sensors for relative humidity, solar radiation, and soil moisture at several depths. The sensor locations were chosen to maximize the variance sampled for snow depth within the basin. Network design and deployment involves an iterative but efficient process. After sensor-station locations are determined, a robust network of interlinking sensor stations and signal repeaters must be constructed to route sensor data to a central base station with a two-way communicable data uplink. Data can then be uploaded from site to remote servers in real time through satellite and cell modems. Signal repeaters are placed for robustness of a self-healing network with redundant signal paths to the base station. Manual, trial-and-error heuristic approaches for node placement are inefficient and labor intensive. In that approach field personnel must restructure the network in real time and wait for new network statistics to be calculated at the base station before finalizing a placement, acting without knowledge of the global topography or overall network structure. We show how digital elevation plus high-definition aerial photographs to give foliage coverage can optimize planning of signal repeater placements and guarantee a robust network structure prior to the physical deployment. We can also 'stress test' the final network

  1. The influence of the chain and network information and communication structure on sustainable business development

    Bremmers, H.J.; Haverkamp, D.J.; Omta, S.W.F.

    2005-01-01

    This article links the public-private information and communication structure (IC-structure) and Ajzen¿s model of planned behaviour to explain the development of environmental management systems (EMSs). The structure of the IC-system, especially the public-private information exchange, can influence

  2. Qualitative discussion of quantitative radiography

    Berger, H.; Motz, J.W.

    1975-01-01

    Since radiography yields an image that can be easily related to the tested object, it is superior to many nondestructive testing techniques in revealing the size, shape, and location of certain types of discontinuities. The discussion is limited to a description of the radiographic process, examination of some of the quantitative aspects of radiography, and an outline of some of the new ideas emerging in radiography. The advantages of monoenergetic x-ray radiography and neutron radiography are noted

  3. Development of Wireless Smart Sensor for Structure and Machine Monitoring

    Ismoyo Haryanto

    2013-07-01

    Full Text Available Vibration based condition monitoring is a method used for determining the condition of a system. The condition of mechanical or a structural system can be determined from the vibration. The vibration that is produced by the system indicates the condition of a system and possibly used to calculate the lifetime of a system or even used to take early action before fatal failure occurred. This paper explains how the wireless smart sensor can be used to identify the health condition of a system by monitoring the vibration parameters. The wireless smart sensor would continously  senses the vibration parameters of the system in a real-time systems and then data will be transmitted wirelessly  to a base station which is a host PC used for digital signal processing, from there the vibration will be plotted as a graph which used to analyzed the condition of the system. Finally, several tested performed to the real system to verify the accuracy of a smart sensor and the method of condition based monitoring.

  4. Configuration development and structural assessment of the FEDC ignitor concept

    Brown, T.G.; Lee, V.D.; Mayhall, J.A.

    1986-01-01

    The Fusion Engineering Design Center (FEDC) performed a design study for a compact ignition tokamak. The ignitor concept has two unique features. First, the throat of the copper plate toroidal field (TF) coils is preloaded in the vertical direction to minimize the stress levels in the copper. Second, the net inward radial TF coil forces are balanced by a combination of wedging on the adjacent faces of the TF coils and by bucking against the ohmic heating solenoid coils in the bore of the tokamak. Later ignitor concepts eliminated the wedging reactions. Both of these features inherently reduce the radial build of the tokamak device. The FEDC version of ignitor incorporates both of these unique features packaged in a different configurational arrangement. The FEDC ignitor features a totally external preload system. The preload is applied directly to the inner leg of the TF coils in the vertical direction only. Horizontal rings are utilized only to react inplane TF coil forces and are not part of the preload system. Modular quadrants of TF coil encasements are utilized to vastly simplify device assembly methods. This paper presents the configuration and a structural assessment of the FEDC ignitor concept

  5. Thapsigargin, origin, chemistry, structure-activity relationships and prodrug development

    Doan, Thi Quynh Nhu; Christensen, Søren Brøgger

    2015-01-01

    Thapsigargin was originally isolated from the roots of the Mediterranean umbelliferous plant Thapsia garganica in order to characterize the skin irritant principle. The biological activity was related to the subnanomolar affinity for the sarco-endoplasmic reticulum calcium ATPase. Prolonged......) targeted against prostate cancer. Conjugation to a peptide, which only is a substrate for prostate specific membrane antigen enabled development of a prodrug (G202), which is targeted towards a number of cancer diseases including hepatocellular carcinoma. G202 has under the name of mipsagargin in clinical...

  6. The development of structure in the expanding universe

    Silk, J.; White, S. D.

    1978-01-01

    A model for clustering in an expanding universe is developed based on an application of the coagulation equation to the collision and aggregation of bound condensations. While the growth rate of clustering is determined by the rate at which density fluctuations reach the nonlinear regime and therefore depends on the initial fluctuation spectrum, the mass spectrum rapidly approaches a self-similar limiting form. This form is determined by the tidal processes which lead to the merging of condensations, and is not dependent on initial conditions.

  7. Development of structural schemes of parallel structure manipulators using screw calculus

    Rashoyan, G. V.; Shalyukhin, K. A.; Gaponenko, EV

    2018-03-01

    The paper considers the approach to the structural analysis and synthesis of parallel structure robots based on the mathematical apparatus of groups of screws and on a concept of reciprocity of screws. The results are depicted of synthesis of parallel structure robots with different numbers of degrees of freedom, corresponding to the different groups of screws. Power screws are applied with this aim, based on the principle of static-kinematic analogy; the power screws are similar to the orts of axes of not driven kinematic pairs of a corresponding connecting chain. Accordingly, kinematic screws of the outlet chain of a robot are simultaneously determined which are reciprocal to power screws of kinematic sub-chains. Solution of certain synthesis problems is illustrated with practical applications. Closed groups of screws can have eight types. The three-membered groups of screws are of greatest significance, as well as four-membered screw groups [1] and six-membered screw groups. Three-membered screw groups correspond to progressively guiding mechanisms, to spherical mechanisms, and to planar mechanisms. The four-membered group corresponds to the motion of the SCARA robot. The six-membered group includes all possible motions. From the works of A.P. Kotelnikov, F.M. Dimentberg, it is known that closed fifth-order screw groups do not exist. The article presents examples of the mechanisms corresponding to the given groups.

  8. Development of computational algorithms for quantification of pulmonary structures

    Oliveira, Marcela de; Alvarez, Matheus; Alves, Allan F.F.; Miranda, Jose R.A.; Pina, Diana R.

    2012-01-01

    The high-resolution computed tomography has become the imaging diagnostic exam most commonly used for the evaluation of the squeals of Paracoccidioidomycosis. The subjective evaluations the radiological abnormalities found on HRCT images do not provide an accurate quantification. The computer-aided diagnosis systems produce a more objective assessment of the abnormal patterns found in HRCT images. Thus, this research proposes the development of algorithms in MATLAB® computing environment can quantify semi-automatically pathologies such as pulmonary fibrosis and emphysema. The algorithm consists in selecting a region of interest (ROI), and by the use of masks, filter densities and morphological operators, to obtain a quantification of the injured area to the area of a healthy lung. The proposed method was tested on ten HRCT scans of patients with confirmed PCM. The results of semi-automatic measurements were compared with subjective evaluations performed by a specialist in radiology, falling to a coincidence of 80% for emphysema and 58% for fibrosis. (author)

  9. Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems

    Richards, Lance; Parker, Allen; Chan, Patrick

    2014-01-01

    The objective of this task is to investigate, develop, and demonstrate a low-cost swept lasing light source for NASA DFRC's fiber optics sensing system (FOSS) to perform structural health monitoring on current and future aerospace vehicles. This is the regular update of the Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems website.

  10. Definition of technology development missions for early space stations. Large space structures, phase 2, midterm review

    1984-01-01

    The large space structures technology development missions to be performed on an early manned space station was studied and defined and the resources needed and the design implications to an early space station to carry out these large space structures technology development missions were determined. Emphasis is being placed on more detail in mission designs and space station resource requirements.

  11. Design and Development of Mechanical Structure and Control System for Tracked Trailing Mobile Robot

    Hongchuan Xu; Jianxing Ren; Rui Zhu; Zhiwei Chen

    2013-01-01

    Along with the science and technology unceasing progress, the uses of tracing robots become more and more widely. Tracked tracing robot was adopted as the research object in this paper, mechanical structure and control system of robot was designed and developmented. In mechanical structure design part, structure designed and positioned  were completed, including design of robot body, wheel, underpan, transmission structure and the positioning of batteries, control panel, sensors, etc, and the...

  12. Group theory for magnetic structure determination: Recent developments and quadrupolar ordering analysis

    Sikora, W. [Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, al.Mickiewicza 30, 30-059 Cracow (Poland)]. E-mail: sikora@novell.ftj.agh.edu.pl; Pytlik, L. [Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, al.Mickiewicza 30, 30-059 Cracow (Poland); Bialas, F. [Nowy Sacz School of Busines-National Louis University, 33-300 Nowy Sacz (Poland); Malinowski, J. [Faculty of Physics and Applied Computer Science, AGH-University of Science and Technology, al.Mickiewicza 30, 30-059 Cracow (Poland)

    2007-09-13

    In this paper, the recent developments in practical applications of symmetry analysis are described. The theoretical basis shortly described in Section 1 has been implemented in several computer applications, one of which is the program 'MODY-win', developed by the authors of the paper. The program calculates the so-called basis vectors of irreducible representations of a given symmetry group, which can be used for calculation of possible ordering modes. Its practical application is demonstrated on some examples, presenting the recent aspects of using the symmetry analysis to description of various types of ordering encountered in solids. The scalar-type ordering (occupation probability) is discussed shortly for occupation of interstitial sites by hydrogen atoms in inter-metallic compounds. The description of vector ordering is demonstrated on the magnetic ordering modes, with special attention focused on the freedom that is left in the structure after imposing all the symmetry constraints. In practice, the final ordering mode usually contains some free parameters that cannot be determined from the symmetry itself. The last application presented in the paper is the description of quadrupolar ordering, recently found in some compounds of 4f (5f) elements. For the latter case, an additional advantage is demonstrated by calculation of possible displacements of neighboring atoms after the establishment of non-zero quadrupolar order parameter on the central atom.

  13. Bruxism: Conceptual discussion and review

    Murali, R. V.; Rangarajan, Priyadarshni; Mounissamy, Anjana

    2015-01-01

    Bruxism is commonly considered a detrimental motor activity, potentially causing overload of the stomatognathic structures. The etiology of bruxism is unclear, but the condition has been associated with stress, occlusal disorders, allergies and sleep positioning. Due to its nonspecific pathology, bruxism may be difficult to diagnose. Unfortunately, very little data exists on the subject of a cause-and-effect relationship of bruxism to the point that expert opinions and cautionary approaches are still considered the best available sources for suggesting good practice indicators. The present paper reviewed current concepts on bruxism, etiology, diagnosis and management, underlining its effects on dental structures in an attempt to provide clinically useful suggestions based on scientifically sound data. PMID:26015729

  14. Texts, Structure, and Collaboration: Reflections of a Professional Development Addressing Homophobia in Secondary Schools

    Jones, Joseph R.

    2015-01-01

    Homophobia is an incredible problem within educational settings. Therefore, we must begin examining how we can address the challenge in an effective manner. Researchers postulate professional development (PD) discussing homophobia is an appropriate method to address the problem. To date, there is little published literature that discusses how a PD…

  15. Axelrod model: accepting or discussing

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  16. Systematic methodological review: developing a framework for a qualitative semi-structured interview guide.

    Kallio, Hanna; Pietilä, Anna-Maija; Johnson, Martin; Kangasniemi, Mari

    2016-12-01

    To produce a framework for the development of a qualitative semi-structured interview guide. Rigorous data collection procedures fundamentally influence the results of studies. The semi-structured interview is a common data collection method, but methodological research on the development of a semi-structured interview guide is sparse. Systematic methodological review. We searched PubMed, CINAHL, Scopus and Web of Science for methodological papers on semi-structured interview guides from October 2004-September 2014. Having examined 2,703 titles and abstracts and 21 full texts, we finally selected 10 papers. We analysed the data using the qualitative content analysis method. Our analysis resulted in new synthesized knowledge on the development of a semi-structured interview guide, including five phases: (1) identifying the prerequisites for using semi-structured interviews; (2) retrieving and using previous knowledge; (3) formulating the preliminary semi-structured interview guide; (4) pilot testing the guide; and (5) presenting the complete semi-structured interview guide. Rigorous development of a qualitative semi-structured interview guide contributes to the objectivity and trustworthiness of studies and makes the results more plausible. Researchers should consider using this five-step process to develop a semi-structured interview guide and justify the decisions made during it. © 2016 John Wiley & Sons Ltd.

  17. Skills development and structural change: Possibilities for and limitations of redressing structural racial inequalities in South Africa

    Groener, Zelda

    2013-12-01

    Improving structural racial equality for historically-disadvantaged Black South Africans, including low-skilled and unemployed adults and youths, is a pertinent challenge for the South African government during the ongoing transition from apartheid capitalism to post-apartheid capitalism. Within the framework of the National Skills Development Strategy (NSDS), the introduction of "learnerships" and "learning programmes", which include structured learning programmes, learnerships, apprenticeships and skills programmes, has had some impact. But emerging theoretical perspectives assert that apartheid structural racial inequalities persist and that structural reform is imperative. Opposing positions translate into two perspectives on social transition: either capitalism can be de-racialised, or capitalism in South Africa should be dismantled in order to de-racialise it. After a review of relevant literature and governmental documents, the author identifies five structural and pedagogical barriers as likely causes for low completion rates of skills development courses and concludes that structural reform needs more favourable political and economic conditions in order to be successful.

  18. Structural Principles in the Development of Cyclic Peptidic Enzyme Inhibitors

    Xu, Peng; Andreasen, Peter A.; Huang, Mingdong

    2017-01-01

    This review summarizes our studies in the development of small cyclic peptides for specifically modulating enzyme activity. Serine proteases share highly similar active sites but perform diverse physiological and pathological functions. From a phage-display peptide library, we isolated two mono-cyclic peptides, upain-1 (CSWRGLENHRMC) and mupain-1 (CPAYSRYLDC), which inhibit the activity of human and murine urokinase-type plasminogen activators (huPA and muPA) with Ki values in the micromolar or sub-micromolar range, respectively. The following affinity maturations significantly enhanced the potencies of the two peptides, 10-fold and >250-fold for upain-1 and mupain-1, respectively. The most potent muPA inhibitor has a potency (Ki = 2 nM) and specificity comparable to mono-clonal antibodies. Furthermore, we also found an unusual feature of mupain-1 that its inhibitory potency can be enhanced by increasing the flexibility, which challenges the traditional viewpoint that higher rigidity leading to higher affinity. Moreover, by changing a few key residues, we converted mupain-1 from a uPA inhibitor to inhibitors of other serine proteases, including plasma kallikrein (PK) and coagulation factor XIa (fXIa). PK and fXIa inhibitors showed Ki values in the low nanomolar range and high specificity. Our studies demonstrate the versatility of small cyclic peptides to engineer inhibitory potency against serine proteases and to provide a new strategy for generating peptide inhibitors of serine proteases. PMID:29104489

  19. Development of the SSTL-300-S1 Composite Imager Barrel Structure

    Hamar, Chris; Wood, Trevor; Alsami, Sami; Hallett, Ben

    2014-06-01

    The SSTL-300-S1 is the latest in the family of highly capable SSTL-300 platforms, providing high resolution imagery with all the existing mission performance of the heritage platform. In developing the product, SSTL has had to undertake the development of a composite imager barrel assembly, which forms the payload instrument's primary structure. Working to a nominal schedule of 24 months from requirements definition to structural qualification, the barrel's development philosophy has had to carefully balance the interdependent optical, structural and programmatic requirements. This paper provides a brief summary description of that development.

  20. Development of pressure containment and damage tolerance technology for composite fuselage structures in large transport aircraft

    Smith, P. J.; Thomson, L. W.; Wilson, R. D.

    1986-01-01

    NASA sponsored composites research and development programs were set in place to develop the critical engineering technologies in large transport aircraft structures. This NASA-Boeing program focused on the critical issues of damage tolerance and pressure containment generic to the fuselage structure of large pressurized aircraft. Skin-stringer and honeycomb sandwich composite fuselage shell designs were evaluated to resolve these issues. Analyses were developed to model the structural response of the fuselage shell designs, and a development test program evaluated the selected design configurations to appropriate load conditions.